summaryrefslogtreecommitdiffstats
path: root/po/lt.po
diff options
context:
space:
mode:
Diffstat (limited to 'po/lt.po')
-rw-r--r--po/lt.po76
1 files changed, 38 insertions, 38 deletions
diff --git a/po/lt.po b/po/lt.po
index 826c7fe9..8d03e9c3 100644
--- a/po/lt.po
+++ b/po/lt.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: urpmi 1.7\n"
-"POT-Creation-Date: 2002-01-23 23:41+0100\n"
+"POT-Creation-Date: 2002-01-28 12:56+0100\n"
"PO-Revision-Date: 2001-03-04 15:40+0200\n"
"Last-Translator: Mykolas Norvai餫s <Myka@centras.lt>\n"
"Language-Team: Lithuanian <komp_lt@konferencijos.lt>\n"
@@ -358,168 +358,168 @@ msgstr ""
msgid "there are multiple packages with the same rpm filename \"%s\""
msgstr ""
-#: po/placeholder.h:74 urpm.pm:212
+#: po/placeholder.h:74
+msgid "...copying failed"
+msgstr ""
+
+#: po/placeholder.h:75 urpm.pm:212
#, c-format
msgid "medium \"%s\" tries to use an already used list, medium ignored"
msgstr ""
-#: po/placeholder.h:75
+#: po/placeholder.h:76
msgid "retrieving hdlists file..."
msgstr ""
-#: po/placeholder.h:76 urpm.pm:253
+#: po/placeholder.h:77 urpm.pm:253
#, c-format
msgid "unable to access hdlist file of \"%s\", medium ignored"
msgstr ""
-#: po/placeholder.h:77 urpm.pm:1190
+#: po/placeholder.h:78 urpm.pm:1190
msgid "unable to register rpm file"
msgstr ""
-#: po/placeholder.h:78
+#: po/placeholder.h:79
#, c-format
msgid "\"%s\""
msgstr ""
-#: po/placeholder.h:79 urpm.pm:307
+#: po/placeholder.h:80 urpm.pm:307
#, c-format
msgid "unable to inspect list file for \"%s\", medium ignored"
msgstr ""
-#: po/placeholder.h:80
+#: po/placeholder.h:81
#, c-format
msgid "too many mount points for removable medium \"%s\""
msgstr ""
-#: po/placeholder.h:81
+#: po/placeholder.h:82
#, c-format
msgid "invalid hdlist description \"%s\" in hdlists file"
msgstr ""
-#: po/placeholder.h:82 urpm.pm:299
+#: po/placeholder.h:83 urpm.pm:299
#, c-format
msgid "incoherent list file for \"%s\", medium ignored"
msgstr ""
-#: po/placeholder.h:83
+#: po/placeholder.h:84
#, c-format
msgid "copy of [%s] failed"
msgstr ""
-#: po/placeholder.h:84 urpm.pm:1398
+#: po/placeholder.h:85 urpm.pm:1398
#, c-format
msgid "unable to parse correctly [%s]"
msgstr ""
-#: po/placeholder.h:85 urpm.pm:1399
+#: po/placeholder.h:86 urpm.pm:1399
#, c-format
msgid "read synthesis file [%s]"
msgstr ""
-#: po/placeholder.h:86 urpm.pm:1390 urpm.pm:1397
+#: po/placeholder.h:87 urpm.pm:1390 urpm.pm:1397
#, c-format
msgid "unable to analyse synthesis data of %s"
msgstr ""
-#: po/placeholder.h:87 urpm.pm:93
+#: po/placeholder.h:88 urpm.pm:93
msgid "no webfetch (curl or wget currently) found\n"
msgstr ""
-#: po/placeholder.h:88
+#: po/placeholder.h:89
#, c-format
msgid "retrieving source hdlist (or synthesis) of \"%s\"..."
msgstr ""
-#: po/placeholder.h:89
+#: po/placeholder.h:90
msgid "...copying done"
msgstr ""
-#: po/placeholder.h:90
+#: po/placeholder.h:91
#, c-format
msgid "copying source hdlist (or synthesis) of \"%s\"..."
msgstr ""
-#: po/placeholder.h:91
+#: po/placeholder.h:92
msgid "copying hdlists file..."
msgstr ""
-#: po/placeholder.h:92 urpm.pm:188 urpm.pm:200
+#: po/placeholder.h:93 urpm.pm:188 urpm.pm:200
#, c-format
msgid "syntax error in config file at line %s"
msgstr ""
-#: po/placeholder.h:93
+#: po/placeholder.h:94
#, c-format
msgid "building hdlist [%s]"
msgstr ""
-#: po/placeholder.h:94 urpm.pm:1798
+#: po/placeholder.h:95 urpm.pm:1798
#, c-format
msgid "unable to read rpm file [%s] from medium \"%s\""
msgstr ""
-#: po/placeholder.h:95
+#: po/placeholder.h:96
#, c-format
msgid "added medium %s"
msgstr ""
-#: po/placeholder.h:96
+#: po/placeholder.h:97
msgid "retrieve of source hdlist (or synthesis) failed"
msgstr ""
-#: po/placeholder.h:97 urpm.pm:1194
+#: po/placeholder.h:98 urpm.pm:1194
msgid "error registering local packages"
msgstr ""
-#: po/placeholder.h:98
+#: po/placeholder.h:99
#, c-format
msgid "taking removable device as \"%s\""
msgstr ""
-#: po/placeholder.h:99 urpm.pm:1875
+#: po/placeholder.h:100 urpm.pm:1875
#, c-format
msgid "...retrieving failed: %s"
msgstr ""
-#: po/placeholder.h:100 urpm.pm:1814
+#: po/placeholder.h:101 urpm.pm:1814
#, c-format
msgid "incoherent medium \"%s\" marked removable but not really"
msgstr ""
-#: po/placeholder.h:101
+#: po/placeholder.h:102
#, c-format
msgid "copying description file of \"%s\"..."
msgstr ""
-#: po/placeholder.h:102
+#: po/placeholder.h:103
#, c-format
msgid "unable to build hdlist: %s"
msgstr ""
-#: po/placeholder.h:103 urpm.pm:1788 urpm.pm:1791 urpm.pm:1810
+#: po/placeholder.h:104 urpm.pm:1788 urpm.pm:1791 urpm.pm:1810
#, c-format
msgid "medium \"%s\" is not selected"
msgstr ""
-#: po/placeholder.h:104 urpm.pm:1185
+#: po/placeholder.h:105 urpm.pm:1185
#, c-format
msgid "invalid rpm file name [%s]"
msgstr ""
-#: po/placeholder.h:105 urpm.pm:1376
+#: po/placeholder.h:106 urpm.pm:1376
#, c-format
msgid "unknown data associated with %s"
msgstr ""
-#: po/placeholder.h:106 urpm.pm:269
+#: po/placeholder.h:107 urpm.pm:269
#, c-format
msgid "trying to bypass existing medium \"%s\", avoiding"
msgstr ""
-#: po/placeholder.h:107
-msgid "...copying falied"
-msgstr ""
-
#: po/placeholder.h:108 urpm.pm:255
#, c-format
msgid "unable to access list file of \"%s\", medium ignored"
th: 44.7%;'/> -rw-r--r--perl-install/share/po/fi.po27711
-rw-r--r--perl-install/share/po/fr.po28205
-rw-r--r--perl-install/share/po/ga.po20915
-rw-r--r--perl-install/share/po/gl.po22425
-rw-r--r--perl-install/share/po/he.po21242
-rw-r--r--perl-install/share/po/hr.po25914
-rw-r--r--perl-install/share/po/hu.po27396
-rw-r--r--perl-install/share/po/id.po26386
-rw-r--r--perl-install/share/po/is.po22074
-rw-r--r--perl-install/share/po/it.po28357
-rw-r--r--perl-install/share/po/ja.po28125
-rw-r--r--perl-install/share/po/ko.po23308
-rw-r--r--perl-install/share/po/lt.po22900
-rw-r--r--perl-install/share/po/lv.po24181
-rw-r--r--perl-install/share/po/mt.po25820
-rw-r--r--perl-install/share/po/nl.po27284
-rw-r--r--perl-install/share/po/no.po27173
-rw-r--r--perl-install/share/po/pl.po26853
-rw-r--r--perl-install/share/po/pt.po26721
-rw-r--r--perl-install/share/po/pt_BR.po26231
-rw-r--r--perl-install/share/po/ro.po22225
-rw-r--r--perl-install/share/po/ru.po29492
-rw-r--r--perl-install/share/po/sk.po27087
-rw-r--r--perl-install/share/po/sl.po21341
-rw-r--r--perl-install/share/po/sq.po27477
-rw-r--r--perl-install/share/po/sr.po28164
-rw-r--r--perl-install/share/po/sr@Latn.po21078
-rw-r--r--perl-install/share/po/sv.po26142
-rw-r--r--perl-install/share/po/ta.po24075
-rw-r--r--perl-install/share/po/tg.po19825
-rw-r--r--perl-install/share/po/th.po22429
-rw-r--r--perl-install/share/po/tr.po25800
-rw-r--r--perl-install/share/po/uk.po24556
-rw-r--r--perl-install/share/po/uz.po20197
-rw-r--r--perl-install/share/po/vi.po27416
-rw-r--r--perl-install/share/po/wa.po25832
-rw-r--r--perl-install/share/po/zh_CN.po26467
-rw-r--r--perl-install/share/po/zh_TW.po25061
55 files changed, 697740 insertions, 671309 deletions
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index d01bae879..68de457b8 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2003-05-15 18:30+0200\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -66,6 +66,11 @@ msgstr ""
msgid "Restore partition table"
msgstr ""
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
@@ -81,70 +86,6 @@ msgstr ""
msgid "Type"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \\\"%s\\\": this option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \\\"%s\\\": the wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \\\"%s\\\": if Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
-"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
-"partition. Resizing can be performed without the loss of any data, provided\n"
-"you have previously defragmented the Windows partition and that it uses the\n"
-"FAT format. Backing up your data is strongly recommended.. Using this\n"
-"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
-"Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \\\"%s\\\": if you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandrake Linux system,\n"
-"choose this option. Be careful, because you will not be able to undo your\n"
-"choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \\\"%s\\\": this will simply erase everything on the drive and begin fresh,\n"
-"partitioning everything from scratch. All data on your disk will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \\\"%s\\\": choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
-"Guide''."
-msgstr ""
-
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -218,11 +159,6 @@ msgid ""
"Try to reconfigure your connection."
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \\\"%s\\\"."
-msgstr ""
-
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -381,11 +317,6 @@ msgstr ""
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \\\"numeric row\\\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
msgid "Swiss (French layout)"
msgstr ""
@@ -409,13 +340,10 @@ msgstr ""
msgid "Soundcard"
msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \\\"Share\\\" in konqueror and nautilus.\n"
-"\n"
-"\\\"Custom\\\" permit a per-user granularity.\n"
+"To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
""
msgstr ""
@@ -535,6 +463,11 @@ msgstr ""
msgid "Username"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Left \"Windows\" key"
+msgstr ""
+
#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Server Configuration"
@@ -552,6 +485,11 @@ msgstr ""
msgid "Guyana"
msgstr ""
+#: ../../printer/main.pm:1
+#, c-format
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
+
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Remove a module"
@@ -590,6 +528,11 @@ msgstr ""
msgid "Choose an existing RAID to add to"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Turkish (modern \"Q\" model)"
+msgstr ""
+
#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo message not found"
@@ -617,47 +560,6 @@ msgstr ""
msgid "/Autodetect _jazz drives"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \\\"root\\\" password. \\\"Root\\\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \\\"root\\\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \\\"root\\\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\\\"root\\\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \\\"root\\\" password -- it makes it far\n"
-"too easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will be the one you will have use the first time you\n"
-"connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \\\"%s\\\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \\\"%s\\\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, if your computer\n"
-"will never be connected to the internet or that you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \\\"%s\\\"."
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
@@ -699,6 +601,88 @@ msgid ""
""
msgstr ""
+#: ../../install_messages.pm:1
+#, c-format
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this License. \n"
+"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
+"with the terms and conditions of this License is void and will terminate your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
+"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
+"of the possession and use of software components or arising out of downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
+"and conditions of the license agreement for each component before using any component. Any question \n"
+"on a component license should be addressed to the component author and not to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of France.\n"
+"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+""
+msgstr ""
+
#: ../../standalone/draksplash:1
#, c-format
msgid ""
@@ -716,23 +700,14 @@ msgstr ""
msgid "LPD - Line Printer Daemon"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \\\"%s\\\" to create a new entry; selecting an entry and\n"
-"clicking \\\"%s\\\" or \\\"%s\\\" to modify or remove it. \\\"%s\\\" validates your\n"
-"changes.\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n"
+""
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -782,6 +757,110 @@ msgstr ""
msgid "Show only for the selected day"
msgstr ""
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+""
+msgstr ""
+
#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
@@ -817,6 +896,14 @@ msgstr ""
msgid "Security"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
+""
+msgstr ""
+
#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "<control>Q"
@@ -883,6 +970,11 @@ msgstr ""
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
@@ -977,11 +1069,6 @@ msgstr ""
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network printer \\\"%s\\\", port %s"
-msgstr ""
-
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
@@ -1022,9 +1109,45 @@ msgstr ""
msgid "Remote lpd Printer Options"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", TCP/IP host \\\"%s\\\", port %s"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: ../../standalone/drakconnect:1
@@ -1248,11 +1371,6 @@ msgstr ""
msgid "User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \\\"%s\\\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
#: ../../fsedit.pm:1
#, c-format
msgid ""
@@ -1325,6 +1443,11 @@ msgstr ""
msgid "Phone number"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
+
#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
@@ -1469,6 +1592,11 @@ msgid ""
"in number of characters"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "To get a list of the options available for the current printer click on the \"Print option list\" button."
+msgstr ""
+
#: ../../standalone/drakgw:1
#, c-format
msgid "Enabling servers..."
@@ -1479,26 +1607,75 @@ msgstr ""
msgid "Printing test page(s)..."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor saa7134\n"
-"module in \\\"/etc/modules\\\") nor installed xawtv, please send the\n"
-"results of \\\"lspcidrake -v -f\\\" to \\\"install\\@mandrakesoft.com\\\"\n"
-"with subject \\\"undetected TV card\\\".\n"
-"\n"
-"\n"
-"You can install it by typing \\\"urpmi xawtv\\\" as root, in a console."
+"There is already a partition with mount point %s\n"
+""
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is already a partition with mount point %s\n"
-""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
#: ../../lang.pm:1
@@ -1536,6 +1713,31 @@ msgstr ""
msgid " / Region"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+""
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -1577,9 +1779,27 @@ msgstr ""
msgid "Is this the correct setting?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Running \\\"%s\\\" ..."
+msgid ""
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
msgstr ""
#: ../../standalone/drakbackup:1
@@ -1602,9 +1822,9 @@ msgstr ""
msgid "Can't use broadcast with no NIS domain"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Georgian (\\\"Russian\\\" layout)"
+msgid "Removing printer \"%s\"..."
msgstr ""
#: ../../standalone/drakfloppy:1
@@ -1637,11 +1857,6 @@ msgstr ""
msgid " on device: %s"
msgstr ""
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on Novell server \\\"%s\\\", printer \\\"%s\\\""
-msgstr ""
-
#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
@@ -1738,6 +1953,35 @@ msgstr ""
msgid "French Polynesia"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+
#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
@@ -1755,6 +1999,11 @@ msgstr ""
msgid "Installing driver for %s card %s"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?"
+msgstr ""
+
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Enable Server"
@@ -1785,11 +2034,37 @@ msgstr ""
msgid "Remove Windows"
msgstr ""
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the applications menu."
+msgstr ""
+
#: ../../harddrake/data.pm:1
#, c-format
msgid "Firewire controllers"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+
#: ../../standalone/drakboot:1
#, c-format
msgid "System mode"
@@ -1815,6 +2090,20 @@ msgstr ""
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
+msgstr ""
+
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
@@ -1843,6 +2132,11 @@ msgid ""
""
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Network printer \"%s\", port %s"
+msgstr ""
+
#: ../../standalone/drakgw:1
#, c-format
msgid "Please choose what network adapter will be connected to your Local Area Network."
@@ -1993,6 +2287,11 @@ msgstr ""
msgid "Buttons emulation"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
+msgstr ""
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
@@ -2085,11 +2384,6 @@ msgstr ""
msgid "Please wait, setting security options..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Every printer needs a name (for example \\\"printer\\\"). The Description and Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
@@ -2156,18 +2450,6 @@ msgstr ""
msgid "Normal modem connection"
msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your computer.\n"
-"Then choose the \\\"TVout\\\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "File Selection"
@@ -2243,13 +2525,6 @@ msgstr ""
msgid "Palau"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"This command you can also use in the \\\"Printing command\\\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
-""
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
@@ -2432,35 +2707,6 @@ msgstr ""
msgid "Host %s"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
-"is best suited to particular types of configuration.\n"
-"\n"
-" * \\\"%s\\\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\\\"%s\\\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"with networks.) It's recommended that you use \\\"pdq\\\" if this is your first\n"
-"experience with GNU/Linux.\n"
-"\n"
-" * \\\"%s\\\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\\\"lpd \\\" printing system, so it compatible with older operating systems\n"
-"which may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \\\"pdq\\\". If you need to emulate a \\\"lpd\\\" server, make\n"
-"sure you turn on the \\\"cups-lpd \\\" daemon. \\\"%s\\\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Armenia"
@@ -2511,45 +2757,6 @@ msgstr ""
msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose which one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \\\"Linux name\\\", \\\"Windows name\\\"\n"
-"\\\"Capacity\\\".\n"
-"\n"
-"\\\"Linux name\\\" is structured: \\\"hard drive type\\\", \\\"hard drive number\\\",\n"
-"\\\"partition number\\\" (for example, \\\"hda1\\\").\n"
-"\n"
-"\\\"Hard drive type\\\" is \\\"hd\\\" if your hard dive is an IDE hard drive and\n"
-"\\\"sd\\\" if it is a SCSI hard drive.\n"
-"\n"
-"\\\"Hard drive number\\\" is always a letter after \\\"hd\\\" or \\\"sd\\\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \\\"a\\\" means \\\"master hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"b\\\" means \\\"slave hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"c\\\" means \\\"master hard drive on the secondary IDE controller\\\";\n"
-"\n"
-" * \\\"d\\\" means \\\"slave hard drive on the secondary IDE controller\\\".\n"
-"\n"
-"With SCSI hard drives, an \\\"a\\\" means \\\"lowest SCSI ID\\\", a \\\"b\\\" means\n"
-"\\\"second lowest SCSI ID\\\", etc.\n"
-"\n"
-"\\\"Windows name\\\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \\\"C:\\\")."
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \\\"halt\\\" instruction is used"
-msgstr ""
-
#: ../../standalone/harddrake2:1
#, c-format
msgid "secondary"
@@ -2621,24 +2828,19 @@ msgstr ""
msgid "Auto-detect printers connected to this machine"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you may not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may have a Swiss\n"
-"keyboard. Or if you speak English but are located in Quebec, you may find\n"
-"yourself in the same situation where your native language and keyboard do\n"
-"not match. In either case, this installation step will allow you to select\n"
-"an appropriate keyboard from a list.\n"
+"XawTV isn't installed!\n"
"\n"
-"Click on the \\\"%s\\\" button to be presented with the complete list of\n"
-"supported keyboards.\n"
"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"If you do have a TV card but DrakX has neither detected it (no bttv nor saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
#: ../../any.pm:1
@@ -2651,6 +2853,14 @@ msgstr ""
msgid "Bolivia"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"\n"
+""
+msgstr ""
+
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
@@ -2666,6 +2876,15 @@ msgstr ""
msgid "DrakSec Basic Options"
msgstr ""
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program. Just type \"sndconfig\" in a console."
+msgstr ""
+
#: ../../lang.pm:1
#, c-format
msgid "Romania"
@@ -2733,6 +2952,11 @@ msgid ""
"Remove the loopback first"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\""
+msgstr ""
+
#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
@@ -2771,14 +2995,6 @@ msgid ""
"%s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You can also use the graphical interface \\\"xpdq\\\" for setting options and handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \\\"panic button\\\", an icon on the desktop, labeled with \\\"STOP Printer!\\\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
-""
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
@@ -2799,13 +3015,6 @@ msgstr ""
msgid "Please choose your country."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \\\"%s\\\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup files..."
@@ -2940,14 +3149,6 @@ msgstr ""
msgid "Mouse"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"The \\\"%s\\\" and \\\"%s\\\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \\\"%s <file>\\\".\n"
-""
-msgstr ""
-
#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
@@ -2986,42 +3187,56 @@ msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user may have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \\\"root\\\", who is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configurations, protecting the system from unintentional or malicious\n"
-"changes that impact on the system as a whole. You will have to create at\n"
-"least one regular user for yourself -- this is the account which you should\n"
-"use for routine, day-to-day use. Although it is very easy to log in as\n"
-"\\\"root\\\" to do anything and everything, it may also be very dangerous! A\n"
-"very simple mistake could mean that your system will not work any more. If\n"
-"you make a serious mistake as a regular user, the worst that will happen is\n"
-"that you will lose some information, but not affect the entire system.\n"
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in this field and copy it to the \\\"%s\\\" field, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the username. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \\\"root\\\" password, but that is no reason to neglect\n"
-"it by making it blank or too simple: after all, your files could be the\n"
-"ones at risk.\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
"\n"
-"Once you click on \\\"%s\\\", you can add other users. Add a user for each one\n"
-"of your friends: your father or your sister, for example. Click \\\"%s\\\" when\n"
-"you have finished adding users.\n"
+"For Linux, there are a few possible options:\n"
"\n"
-"Clicking the \\\"%s\\\" button allows you to change the default \\\"shell\\\" for\n"
-"that user (bash by default).\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
"\n"
-"When you have finished adding users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \\\"%s\\\".\n"
-"If you are not interested in this feature, uncheck the \\\"%s\\\" box."
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
#: ../../standalone/drakTermServ:1
@@ -3029,6 +3244,14 @@ msgstr ""
msgid "No floppy drive available!"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+""
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
@@ -3068,6 +3291,11 @@ msgid ""
""
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing on the printer \"%s\""
+msgstr ""
+
#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
@@ -3078,16 +3306,6 @@ msgstr ""
msgid "Restore From Tape"
msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \\\"irq\\\" and \\\"io\\\" of your card.\n"
-""
-msgstr ""
-
#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
@@ -3125,20 +3343,6 @@ msgid ""
"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \\\"lilo\\\" as root in command line to complete LiLo theme installation."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \\\"XSane\\\" from Multimedia/Graphics in the applications menu."
-msgstr ""
-
#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
@@ -3201,11 +3405,28 @@ msgstr ""
msgid "Modify"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
+""
+msgstr ""
+
#: ../../standalone/drakbackup:1
#, c-format
msgid "Need hostname, username and password!"
msgstr ""
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+
#: ../../standalone/drakbug:1
#, c-format
msgid "HardDrake"
@@ -3266,6 +3487,11 @@ msgstr ""
msgid "Connect..."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr ""
+
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "not configured"
@@ -3281,20 +3507,6 @@ msgstr ""
msgid "About"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \\\"localhost\\\" as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
-msgstr ""
-
#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
@@ -3434,13 +3646,6 @@ msgstr ""
msgid "Mount points must begin with a leading /"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \\\"COM1\\\" port under\n"
-"Windows is named \\\"ttyS0\\\" under GNU/Linux."
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Postfix Mail Server"
@@ -3739,11 +3944,6 @@ msgstr ""
msgid "France"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \\\"%s\\\" on SMB/Windows server \\\"%s\\\""
-msgstr ""
-
#: ../../standalone/drakperm:1
#, c-format
msgid "browse"
@@ -3771,106 +3971,29 @@ msgstr ""
msgid "Turkey"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake Linux distribution \n"
-"shall be called the \\\"Software Products\\\" hereafter. The Software Products include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this License. \n"
-"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
-"with the terms and conditions of this License is void and will terminate your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \\\"as is\\\", with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
-"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
-"of the possession and use of software components or arising out of downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU General Public \n"
-"Licence, hereafter called \\\"GPL\\\", or of similar licenses. Most of these licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
-"and conditions of the license agreement for each component before using any component. Any question \n"
-"on a component license should be addressed to the component author and not to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\\\"Mandrake\\\", \\\"Mandrake Linux\\\" and associated logos are trademarks of MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of France.\n"
-"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-""
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \\\"%s\\\""
+msgid "Number of buttons"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid "Vietnamese \"numeric row\" QWERTY"
msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Number of buttons"
+msgid "Module"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
+msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred."
msgstr ""
#: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1
@@ -3903,6 +4026,11 @@ msgstr ""
msgid "Configure all heads independently"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
@@ -3913,11 +4041,6 @@ msgstr ""
msgid "Load/Save on floppy"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printer \\\"%s\\\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
#: ../../standalone/draksplash:1 ../../standalone/draksplash:1
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
@@ -3981,6 +4104,81 @@ msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
@@ -4022,6 +4220,13 @@ msgstr ""
msgid "Macedonia"
msgstr ""
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+
#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
@@ -4032,11 +4237,6 @@ msgstr ""
msgid "Libya"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", network printer \\\"%s\\\", port %s"
-msgstr ""
-
#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
@@ -4150,31 +4350,6 @@ msgid ""
"- Save to Tape on device: %s"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \\\"lspcidrake -v | fgrep AUDIO\\\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \\\"grep sound-slot /etc/modules.conf\\\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \\\"/sbin/lsmod\\\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \\\"/sbin/chkconfig --list sound\\\" and \\\"/sbin/chkconfig --list alsa\\\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \\\"aumix -q\\\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \\\"/sbin/fuser -v /dev/dsp\\\" will tell which program uses the sound card.\n"
-""
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "East Timor"
@@ -4273,16 +4448,6 @@ msgstr ""
msgid "Start sector: "
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \\\"Pre-Windows 2000 Compatible Access\\\" everyone /add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are good."
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
@@ -4298,6 +4463,16 @@ msgstr ""
msgid "Seychelles"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+
#: ../../standalone/drakbackup:1
#, c-format
msgid "Bad password on %s"
@@ -4310,13 +4485,6 @@ msgid ""
"There is one unknown printer directly connected to your system"
msgstr ""
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \\\"Ok\\\" to install 'ImageMagick' or \\\"Cancel\\\" to quit"
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Zambia"
@@ -4337,11 +4505,6 @@ msgstr ""
msgid "Romanian (qwerty)"
msgstr ""
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on SMB/Windows server \\\"%s\\\", share \\\"%s\\\""
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid "Under Devel ... please wait."
@@ -4372,6 +4535,14 @@ msgstr ""
msgid "Import Fonts"
msgstr ""
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+
#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Temporary Files"
@@ -4455,6 +4626,13 @@ msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
+""
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""
@@ -4494,11 +4672,6 @@ msgstr ""
msgid "Browse"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "In addition, queues not created with this program or \\\"foomatic-configure\\\" cannot be transferred."
-msgstr ""
-
#: ../../harddrake/data.pm:1
#, c-format
msgid "CDROM"
@@ -4519,19 +4692,6 @@ msgstr ""
msgid "Do you have an ISA sound card?"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \\\"Next\\\" when you are ready, and on \\\"Cancel\\\" if you do not want to set up your printer(s) now."
-msgstr ""
-
#: ../../network/ethernet.pm:1
#, c-format
msgid ""
@@ -4549,35 +4709,6 @@ msgstr ""
msgid "Can't make screenshots before partitioning"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \\\"/\\\", \\\"/usr\\\" or \\\"/var\\\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\\\"/home\\\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \\\"%s\\\" when you are ready to format partitions.\n"
-"\n"
-"Click on \\\"%s\\\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \\\"%s\\\" if you wish to select partitions that will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Name"
@@ -4588,6 +4719,11 @@ msgstr ""
msgid "/File/Save _As"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
+msgstr ""
+
#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
@@ -4708,13 +4844,6 @@ msgstr ""
msgid "USA (cable-hrc)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Do you want to set this printer (\\\"%s\\\")\n"
-"as the default printer?"
-msgstr ""
-
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
@@ -4804,11 +4933,6 @@ msgstr ""
msgid "Size"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "You have transferred your former default printer (\\\"%s\\\"), Should it be also the default printer under the new printing system %s?"
-msgstr ""
-
#: ../../help.pm:1
#, c-format
msgid "GRUB"
@@ -4843,6 +4967,36 @@ msgstr ""
msgid "Delete All NBIs"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+
#: ../../security/help.pm:1
#, c-format
msgid "if set, send the mail report to this email address else send it to root."
@@ -4853,11 +5007,6 @@ msgstr ""
msgid "Which configuration of XFree do you want to have?"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\\\"Menu\\\" key"
-msgstr ""
-
#: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
@@ -4871,11 +5020,6 @@ msgid ""
"connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \\\"MtoolsFM\\\" (Menu: \\\"Applications\\\" -> \\\"File tools\\\" -> \\\"MTools File Manager\\\") or the command line utilities \\\"mtools\\\" (enter \\\"man mtools\\\" on the command line for more info). You find the card's file system under the drive letter \\\"p:\\\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \\\"MtoolsFM\\\" you can switch between drive letters with the field at the upper-right corners of the file lists."
-msgstr ""
-
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
@@ -4938,6 +5082,13 @@ msgstr ""
msgid "Choose the network or host on which the local printers should be made available:"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
+""
+msgstr ""
+
#: ../../lang.pm:1
#, c-format
msgid "Japan"
@@ -4968,19 +5119,16 @@ msgstr ""
msgid "Warning, another internet connection has been detected, maybe using your network"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid "Cd-Rom labeled \"%s\""
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \\\"Raw printer\\\" is highlighted."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
#: ../../install_steps_interactive.pm:1
@@ -5011,6 +5159,11 @@ msgstr ""
msgid "I don't know"
msgstr ""
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ""
+
#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
@@ -5023,6 +5176,14 @@ msgid ""
"Do you want to continue?"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
+msgstr ""
+
#: ../../standalone/drakfont:1
#, c-format
msgid "Post Uninstall"
@@ -5092,70 +5253,6 @@ msgstr ""
msgid "Uruguay"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented with a list of different parameters to change to get\n"
-"an optimal graphical display: Graphic Card\n"
-"\n"
-" The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is correct, you can choose from\n"
-"this list the monitor you actually have connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" Here you can choose the resolutions and color depths available for your\n"
-"hardware. Choose the one that best suits your needs (you will be able to\n"
-"change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \\\"%s\\\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\\\"%s\\\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the list shown below or click on the \\\"Print option list\\\" button.%s%s%s\n"
-"\n"
-""
-msgstr ""
-
#: ../../standalone/drakperm:1
#, c-format
msgid "Path selection"
@@ -5191,11 +5288,6 @@ msgstr ""
msgid "Please check all users that you want to include in your backup."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \\\"%s\\\""
-msgstr ""
-
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
@@ -5203,16 +5295,6 @@ msgid ""
"You can launch printerdrake from the Mandrake Control Center in Hardware section."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \\\"The model is correct\\\" if so and if not, click \\\"Select model manually\\\" so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
@@ -5223,6 +5305,21 @@ msgstr ""
msgid "Japan (cable)"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+msgstr ""
+
#: ../../standalone/drakfont:1 ../../standalone/drakfont:1
#, c-format
msgid "Initial tests"
@@ -5238,6 +5335,15 @@ msgstr ""
msgid "Custom Restore"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
@@ -5270,17 +5376,6 @@ msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \\\"Print\\\" command of your application (usually in the \\\"File\\\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \\\"Printer\\\" in the \\\"Hardware\\\" section of the Mandrake Control Center."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
msgstr ""
@@ -5617,6 +5712,11 @@ msgid ""
"Do you really want to configure printing on this machine?"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host \"%s\", port %s"
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
@@ -5672,11 +5772,6 @@ msgstr ""
msgid "Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Cd-Rom labeled \\\"%s\\\""
-msgstr ""
-
#: ../../standalone/drakxtv:1
#, c-format
msgid "XawTV isn't installed!"
@@ -5704,6 +5799,21 @@ msgstr ""
msgid "This label is already used"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
@@ -5871,14 +5981,14 @@ msgstr ""
msgid "Choose file"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Left \\\"Windows\\\" key"
+msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
msgstr ""
-#: ../../network/shorewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
+msgid "Printing/Photo Card Access on \"%s\""
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -5898,6 +6008,11 @@ msgstr ""
msgid "Generic PS2 Wheel Mouse"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr ""
+
#: ../../standalone/harddrake2:1
#, c-format
msgid "Select a device !"
@@ -5940,7 +6055,7 @@ msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing old printer \\\"%s\\\"..."
+msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists."
msgstr ""
#: ../../steps.pm:1
@@ -5971,19 +6086,16 @@ msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\\\"Transfer\\\"."
+msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users."
msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
-"\\\"%s\\\": check the current country selection. If you are not in this\n"
-"country, click on the \\\"%s\\\" button and choose another one. If your country\n"
-"is not in the first list shown, click the \\\"%s\\\" button to get the complete\n"
-"country list."
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
#: ../../lang.pm:1
@@ -6051,16 +6163,6 @@ msgstr ""
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"The old \\\"%s\\\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \\\"%s\\\" driver'll only be used on next bootstrap."
-msgstr ""
-
#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
@@ -6096,11 +6198,6 @@ msgstr ""
msgid "These are the machines on which the locally connected scanner(s) should be available:"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No sound card detected. Try \\\"harddrake\\\" after installation"
-msgstr ""
-
#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP end ip"
@@ -6239,11 +6336,24 @@ msgstr ""
msgid "Armenian (old)"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+
#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid "Find the solutions of your problems via MandrakeSoft's online support platform."
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", host \"%s\", port %s"
+msgstr ""
+
#: ../../lang.pm:1
#, c-format
msgid "Monaco"
@@ -6264,11 +6374,6 @@ msgstr ""
msgid "Canada (cable)"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \\\"Windows\\\" key"
-msgstr ""
-
#: ../../help.pm:1 ../../help.pm:1
#, c-format
msgid "Upgrade"
@@ -6291,11 +6396,6 @@ msgstr ""
msgid "Kyrgyzstan"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do you really want to remove the printer \\\"%s\\\"?"
-msgstr ""
-
#: ../../help.pm:1
#, c-format
msgid "With basic documentation"
@@ -6367,20 +6467,6 @@ msgstr ""
msgid "Please test the mouse"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to install\n"
-"SILO on your system, or another operating system removes SILO, or SILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used with\n"
-"the Mandrake rescue image, making it much easier to recover from severe system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the first\n"
-"drive and press \\\"Ok\\\"."
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid "Other Media"
@@ -6498,11 +6584,6 @@ msgid ""
""
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printer \\\"%s\\\" is set as the default printer now."
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Senegal"
@@ -6513,6 +6594,11 @@ msgstr ""
msgid "Command line"
msgstr ""
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "Our full range of Linux solutions, as well as special offers on products and other \"goodies\", are available on our e-store:"
+msgstr ""
+
#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
@@ -6656,11 +6742,6 @@ msgstr ""
msgid "Internet Connection Sharing is now disabled."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuring printer \\\"%s\\\"..."
-msgstr ""
-
#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
@@ -6728,6 +6809,18 @@ msgstr ""
msgid "Install"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+
#: ../../steps.pm:1
#, c-format
msgid "Exit install"
@@ -6775,20 +6868,6 @@ msgstr ""
msgid "Devanagari"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \\\"ps auxwww\\\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \\\"GUEST\\\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \\\"%s\\\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
@@ -6859,11 +6938,6 @@ msgstr ""
msgid "Backup User files..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Removing printer \\\"%s\\\"..."
-msgstr ""
-
#: ../../steps.pm:1
#, c-format
msgid "Install system"
@@ -6904,6 +6978,11 @@ msgstr ""
msgid "load setting"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr ""
+
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
@@ -6919,35 +6998,6 @@ msgstr ""
msgid "Denmark"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \\\"%s\\\" button, a mouse image is displayed on-screen. Scroll\n"
-"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
-"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
-"buttons and check that the mouse pointer moves on-screen as you move your\n"
-"mouse."
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
@@ -6968,9 +7018,42 @@ msgstr ""
msgid "Installing %s ..."
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, c-format
-msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \\\"Community\\\" webpages."
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
#: ../../diskdrake/interactive.pm:1
@@ -7051,74 +7134,14 @@ msgid ""
""
msgstr ""
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has about your\n"
-"system. Depending on your installed hardware, you may have some or all of\n"
-"the following entries. Each entry is made up of the configuration item to\n"
-"be configured, followed by a quick summary of the current configuration.\n"
-"Click on the corresponding \\\"%s\\\" button to change that.\n"
-"\n"
-" * \\\"%s\\\": check the current keyboard map configuration and change that if\n"
-"necessary.\n"
-"\n"
-" * \\\"%s\\\": check the current country selection. If you are not in this\n"
-"country, click on the \\\"%s\\\" button and choose another one. If your country\n"
-"is not in the first list shown, click the \\\"%s\\\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \\\"%s\\\": By default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \\\"%s\\\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \\\"%s\\\": check the current mouse configuration and click on the button to\n"
-"change it if necessary.\n"
-"\n"
-" * \\\"%s\\\": clicking on the \\\"%s\\\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \\\"%s\\\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \\\"%s\\\": by default, DrakX configures your graphical interface in\n"
-"\\\"800x600\\\" or \\\"1024x768\\\" resolution. If that does not suit you, click on\n"
-"\\\"%s\\\" to reconfigure your graphical interface.\n"
-"\n"
-" * \\\"%s\\\": if a TV card is detected on your system, it is displayed here.\n"
-"If you have a TV card and it is not detected, click on \\\"%s\\\" to try to\n"
-"configure it manually.\n"
-"\n"
-" * \\\"%s\\\": if an ISDN card is detected on your system, it will be displayed\n"
-"here. You can click on \\\"%s\\\" to change the parameters associated with the\n"
-"card.\n"
-"\n"
-" * \\\"%s\\\": If you want to configure your Internet or local network access\n"
-"now.\n"
-"\n"
-" * \\\"%s\\\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \\\"%s\\\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \\\"%s\\\": if you wish to change your bootloader configuration, click that\n"
-"button. This should be reserved to advanced users.\n"
-"\n"
-" * \\\"%s\\\": here you'll be able to fine control which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
+msgid "Type of install"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Type of install"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""
#: ../../standalone/drakbackup:1
@@ -7134,14 +7157,6 @@ msgstr ""
msgid "%d comma separated numbers"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\\\"%s\\\" driver (default driver for your card is \\\"%s\\\")"
-msgstr ""
-
#: ../../services.pm:1
#, c-format
msgid ""
@@ -7318,6 +7333,11 @@ msgstr ""
msgid "Pakistan"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."
+msgstr ""
+
#: ../../standalone/drakperm:1
#, c-format
msgid "Permissions"
@@ -7335,11 +7355,6 @@ msgid ""
""
msgstr ""
-#: ../../printer/cups.pm:1
-#, c-format
-msgid "On CUPS server \\\"%s\\\""
-msgstr ""
-
#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
@@ -7425,14 +7440,6 @@ msgid ""
"Do you want to have the automatic starting of the printing system turned on again?"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \\\"Resize\\\")"
-msgstr ""
-
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -7445,6 +7452,25 @@ msgstr ""
msgid "Add host"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"If you really think that you know which driver is the right one for your card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+""
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
@@ -7462,6 +7488,11 @@ msgstr ""
msgid "Use quota for backup files."
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr ""
+
#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
@@ -7479,21 +7510,6 @@ msgstr ""
msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \\\"Next\\\" when you are ready, and on \\\"Cancel\\\" if you do not want to set up your printer(s) now."
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
@@ -7528,6 +7544,11 @@ msgstr ""
msgid "Internal ISDN card"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
+msgstr ""
+
#: ../../network/modem.pm:1
#, c-format
msgid "Title"
@@ -7553,19 +7574,6 @@ msgstr ""
msgid "replay"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \\\"%s\\\" box. If not, simply turn off your computer."
-msgstr ""
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Freq should have the suffix k, M or G (for example, \\\"2.46G\\\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
-msgstr ""
-
#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
@@ -7712,9 +7720,9 @@ msgstr ""
msgid "Connection timeout (in sec)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Turkish (modern \\\"Q\\\" model)"
+msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used"
msgstr ""
#: ../../keyboard.pm:1
@@ -7844,6 +7852,11 @@ msgstr ""
msgid "primary"
msgstr ""
+#: ../../printer/main.pm:1
+#, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
+
#: ../../help.pm:1
#, c-format
msgid ""
@@ -7875,11 +7888,6 @@ msgstr ""
msgid "Niue"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \\\"Drivers\\\" link. Then choose your model and afterwards \\\"Linux\\\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \\\"lexmarkmaintain\\\" and adjust the head alignment settings with this program."
-msgstr ""
-
#: ../../services.pm:1
#, c-format
msgid ""
@@ -7892,13 +7900,6 @@ msgstr ""
msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \\\"%s <file>\\\".\n"
-""
-msgstr ""
-
#: ../../pkgs.pm:1
#, c-format
msgid "important"
@@ -8007,11 +8008,6 @@ msgstr ""
msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter. Its result is stored as bogomips as a way to \\\"benchmark\\\" the cpu."
-msgstr ""
-
#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
@@ -8191,11 +8187,6 @@ msgstr ""
msgid "Other OS (MacOS...)"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \\\"%s\\\", port %s"
-msgstr ""
-
#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
@@ -8211,6 +8202,40 @@ msgstr ""
msgid "Screenshots will be available after install in %s"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+
#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
@@ -8455,23 +8480,6 @@ msgstr ""
msgid "Italian"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\\\"%s\\\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same timezone. This is useful when the machine\n"
-"also hosts another operating system like Windows.\n"
-"\n"
-"The \\\"%s\\\" option will automatically regulate the clock by connecting to a\n"
-"remote time server on the Internet. For this feature to work, you must have\n"
-"a working Internet connection. It is best to choose a time server located\n"
-"near you. This option actually installs a time server that can used by\n"
-"other machines on your local network as well."
-msgstr ""
-
#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "Basic"
@@ -8589,11 +8597,6 @@ msgstr ""
msgid "access to compilation tools"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \\\"Automatically find available printers on remote machines\\\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \\\"Remote printers\\\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to restore..."
@@ -8611,15 +8614,6 @@ msgstr ""
msgid "Standard test page"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \\\"%s\\\" sound card is \\\"%s\\\" "
-msgstr ""
-
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
@@ -8655,16 +8649,6 @@ msgstr ""
msgid "Gujarati"
msgstr ""
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure only card \\\"%s\\\"%s"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to remove the printer \\\"%s\\\" from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
@@ -8753,6 +8737,40 @@ msgstr ""
msgid "Automatic IP"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+
#: ../../mouse.pm:1 ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
@@ -8980,6 +8998,15 @@ msgstr ""
msgid "Close"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
+msgstr ""
+
#: ../../standalone/logdrake:1
#, c-format
msgid "Calendar"
@@ -9027,6 +9054,16 @@ msgstr ""
msgid "Expand Tree"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
+
#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Mode"
@@ -9042,13 +9079,6 @@ msgstr ""
msgid "Local Network adress"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"The \\\"%s\\\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \\\"%s <file>\\\". "
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup your System files. (/etc directory)"
@@ -9273,6 +9303,13 @@ msgstr ""
msgid "Send mail report after each backup to:"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
+""
+msgstr ""
+
#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
@@ -9385,13 +9422,6 @@ msgid ""
" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid ""
-"Some devices in the \\\"%s\\\" hardware class were removed:\n"
-""
-msgstr ""
-
#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
@@ -9469,11 +9499,6 @@ msgstr ""
msgid "Inuktitut"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Turkish (traditional \\\"F\\\" model)"
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Morocco"
@@ -9521,14 +9546,6 @@ msgstr ""
msgid "commands before booting, or 'c' for a command-line."
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \\\"port/tcp\\\" or \\\"port/udp\\\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-
#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "Problems installing package %s"
@@ -9587,6 +9604,48 @@ msgstr ""
msgid "Tuner type:"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted."
+msgstr ""
+
#: ../../standalone/draksec:1
#, c-format
msgid "Security Administrator:"
@@ -9609,34 +9668,6 @@ msgid ""
"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \\\"%s\\\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if you will\n"
-"host users from Spain on your machine, select English as the default\n"
-"language in the tree view and \\\"%s\\\" in the Advanced section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \\\"%s\\\"\n"
-"box. Selecting support for a language means translations, fonts, spell\n"
-"checkers, etc. for that language will be installed. Additionally, the\n"
-"\\\"%s\\\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
-"however that this is an experimental feature. If you select different\n"
-"languages requiring different encoding the unicode support will be\n"
-"installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \\\"/usr/sbin/localedrake\\\" command as \\\"root\\\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-
#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts copy"
@@ -9652,6 +9683,11 @@ msgstr ""
msgid "Do you want to test the configuration?"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+
#: ../../standalone/draksec:1
#, c-format
msgid ""
@@ -9724,21 +9760,11 @@ msgid ""
"the following error occured: %s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \\\"Manual configuration\\\"."
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section \\\"Network & Internet\\\"/\\\"Connection\\\", and afterwards set up the printer, also using the Mandrake Control Center, section \\\"Hardware\\\"/\\\"Printer\\\""
-msgstr ""
-
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
@@ -9801,6 +9827,11 @@ msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."
@@ -9835,21 +9866,6 @@ msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.\n"
-"\n"
-" Click on \\\"Next\\\" when you are ready, and on \\\"Cancel\\\" if you do not want to set up your printer(s) now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid "Please choose the printer you want to set up or enter a device name/file name in the input line"
msgstr ""
@@ -9902,6 +9918,13 @@ msgstr ""
msgid "xfs restart"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No partition available"
@@ -9937,15 +9960,6 @@ msgstr ""
msgid "True Type install done"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\\\"%s\\\": clicking on the \\\"%s\\\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to setup a new printer. The interface presented there is\n"
-"similar to the one used during installation."
-msgstr ""
-
#: ../../standalone/harddrake2:1
#, c-format
msgid "Detection in progress"
@@ -9966,11 +9980,6 @@ msgstr ""
msgid "Please insert the Update Modules floppy in drive %s"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \\\"phonetic\\\" QWERTY"
-msgstr ""
-
#: ../../standalone/drakboot:1
#, c-format
msgid "Bootsplash"
@@ -9990,6 +9999,13 @@ msgstr ""
msgid "Printer sharing on hosts/networks: "
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
+msgstr ""
+
#: ../../modules/interactive.pm:1
#, c-format
msgid ""
@@ -10047,11 +10063,6 @@ msgid ""
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Interface \\\"%s\\\""
-msgstr ""
-
#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
@@ -10222,13 +10233,6 @@ msgid ""
"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \\\"%s <file>\\\" or \\\"%s <file>\\\".\n"
-""
-msgstr ""
-
#: ../../standalone/drakgw:1
#, c-format
msgid "Automatic reconfiguration"
@@ -10331,36 +10335,6 @@ msgid ""
""
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This dialog allows you to fine tune your bootloader:\n"
-"\n"
-" * \\\"%s\\\": there are three choices for your bootloader:\n"
-"\n"
-" * \\\"%s\\\": if you prefer grub (text menu).\n"
-"\n"
-" * \\\"%s\\\": if you prefer LILO with its text menu interface.\n"
-"\n"
-" * \\\"%s\\\": if you prefer LILO with its graphical interface.\n"
-"\n"
-" * \\\"%s\\\": in most cases, you will not change the default (\\\"%s\\\"), but if\n"
-"you prefer, the bootloader can be installed on the second hard drive\n"
-"(\\\"%s\\\"), or even on a floppy disk (\\\"%s\\\");\n"
-"\n"
-" * \\\"%s\\\": after a boot or a reboot of the computer, this is the delay\n"
-"given to the user at the console to select a boot entry other than the\n"
-"default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\\\"%s\\\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you are doing before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \\\"%s\\\" button in this dialog will offer advanced options which\n"
-"are normally reserved for the expert user."
-msgstr ""
-
#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
@@ -10430,6 +10404,13 @@ msgstr ""
msgid "LVM name?"
msgstr ""
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid ""
+"Some devices in the \"%s\" hardware class were removed:\n"
+""
+msgstr ""
+
#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
@@ -10494,15 +10475,6 @@ msgstr ""
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
-#: ../../install_steps.pm:1
-#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \\\"rpm -qpl Mandrake/RPMS/*.rpm\\\"\n"
-""
-msgstr ""
-
#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with text menu"
@@ -10695,6 +10667,17 @@ msgstr ""
msgid "Winmodem connection"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center."
+msgstr ""
+
#: ../../security/help.pm:1
#, c-format
msgid ""
@@ -10721,6 +10704,23 @@ msgstr ""
msgid "%s on %s"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Which is your timezone?"
@@ -10869,16 +10869,16 @@ msgstr ""
msgid "matching"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \\\"Printing command\\\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
-""
+msgid "Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../install2.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
#: ../../install_steps_gtk.pm:1
@@ -10896,13 +10896,6 @@ msgstr ""
msgid "Use existing partitions"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use the command \\\"%s <file>\\\" or a graphical printing tool: \\\"xpp <file>\\\" or \\\"kprinter <file>\\\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
-""
-msgstr ""
-
#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
@@ -10933,6 +10926,17 @@ msgid ""
""
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
#: ../../network/netconnect.pm:1
#, c-format
msgid "We are now going to configure the %s connection."
@@ -10991,6 +10995,11 @@ msgstr ""
msgid "A valid URI must be entered!"
msgstr ""
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr ""
+
#: ../../standalone/drakgw:1
#, c-format
msgid "Re-configure interface and DHCP server"
@@ -11088,6 +11097,71 @@ msgid ""
"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
+"\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
+
#: ../../lang.pm:1
#, c-format
msgid "Comoros"
@@ -11115,6 +11189,13 @@ msgstr ""
msgid "USA (cable)"
msgstr ""
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgstr ""
+
#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
@@ -11182,6 +11263,11 @@ msgstr ""
msgid "Network & Internet"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr ""
+
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Net Boot Images"
@@ -11314,81 +11400,6 @@ msgstr ""
msgid "2 MB"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \\\"%s\\\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \\\"%s\\\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\\\"%s\\\": gives access to additional features:\n"
-"\n"
-" * \\\"%s\\\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \\\"%s\\\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \\\"%s\\\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it doesn't always\n"
-"work.\n"
-"\n"
-" * \\\"%s\\\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \\\"%s\\\": unchecking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \\\"%s\\\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \\\"%s\\\": use this option to cancel your changes.\n"
-"\n"
-" * \\\"%s\\\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \\\"%s\\\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
#: ../../standalone.pm:1
#, c-format
msgid ""
@@ -11421,6 +11432,11 @@ msgstr ""
msgid "Generating preview ..."
msgstr ""
+#: ../../network/network.pm:1
+#, c-format
+msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
+msgstr ""
+
#: ../../mouse.pm:1
#, c-format
msgid "serial"
@@ -11431,6 +11447,11 @@ msgstr ""
msgid "DVD-ROM"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr ""
+
#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid "Get the best items with Mandrake Linux Strategic partners"
@@ -11453,11 +11474,6 @@ msgstr ""
msgid "Kenya"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "allow \\\"su\\\""
-msgstr ""
-
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
@@ -11468,11 +11484,6 @@ msgstr ""
msgid "Installing mtools packages..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printer \\\"%s\\\" was successfully removed from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
@@ -11562,45 +11573,6 @@ msgstr ""
msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \\\"%s\\\" on SMB/Windows server \\\"%s\\\""
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \\\"%s\\\" to reboot the system. The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"bootloader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \\\"%s\\\" button shows two more buttons to:\n"
-"\n"
-" * \\\"%s\\\": to create an installation floppy disk that will automatically\n"
-"perform a whole installation without the help of an operator, similar to\n"
-"the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \\\"%s\\\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-" * \\\"%s\\\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \\\"%s\\\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key and type >>linux\n"
-"defcfg=\\\"floppy\\\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\\\"mformat a:\\\")"
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
@@ -11623,6 +11595,40 @@ msgid ""
"please click Wizard or Advanced."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+
#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Remove"
@@ -11719,6 +11725,11 @@ msgid ""
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
+#: ../../network/network.pm:1
+#, c-format
+msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
+msgstr ""
+
#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
@@ -11825,6 +11836,62 @@ msgstr ""
msgid "Empty"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
@@ -11840,6 +11907,11 @@ msgstr ""
msgid "The default lease (in seconds)"
msgstr ""
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
@@ -11890,11 +11962,6 @@ msgstr ""
msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\\\"Information\\\")"
-msgstr ""
-
#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
@@ -11935,56 +12002,6 @@ msgstr ""
msgid "Launch userdrake"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \\\"root\\\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
-"variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \\\"root\\\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \\\"root\\\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Is this an install or an upgrade?"
@@ -11995,9 +12012,9 @@ msgstr ""
msgid "ISDN card"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Found \\\"%s\\\" interface do you want to use it ?"
+msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \"Community\" webpages."
msgstr ""
#: ../../network/netconnect.pm:1
@@ -12016,14 +12033,38 @@ msgid ""
""
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
+
#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "\\\"%s\\\" based winmodem detected, do you want to install needed software ?"
+msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
#: ../../standalone/drakperm:1
@@ -12175,18 +12216,6 @@ msgstr ""
msgid "Network configuration (%d adapters)"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \\\"%s\\\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \\\"%s\\\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \\\"%s\\\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
@@ -12264,11 +12293,6 @@ msgstr ""
msgid "Lilo screen"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \\\"Manual configuration\\\"."
-msgstr ""
-
#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with graphical menu"
@@ -12284,6 +12308,11 @@ msgstr ""
msgid "You can't unselect this package. It is already installed"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ""
+
#: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
@@ -12314,9 +12343,18 @@ msgstr ""
msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \\\"%s\\\""
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to install\n"
+"SILO on your system, or another operating system removes SILO, or SILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used with\n"
+"the Mandrake rescue image, making it much easier to recover from severe system\n"
+"failures.\n"
+"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the first\n"
+"drive and press \"Ok\"."
msgstr ""
#: ../../fsedit.pm:1
@@ -12461,6 +12499,11 @@ msgstr ""
msgid "The encryption keys do not match"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr ""
+
#: ../../standalone/drakbackup:1
#, c-format
msgid "CDROM / DVDROM"
@@ -12471,6 +12514,14 @@ msgstr ""
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
@@ -12601,14 +12652,19 @@ msgstr ""
msgid "European protocol"
msgstr ""
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ""
+
#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " on LPD server \\\"%s\\\", printer \\\"%s\\\""
+msgid "allow \"su\""
msgstr ""
#: ../../lang.pm:1 ../../standalone/drakxtv:1
@@ -12621,6 +12677,11 @@ msgstr ""
msgid "please wait during ttmkfdir..."
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr ""
+
#: ../../standalone/harddrake2:1
#, c-format
msgid "Level"
@@ -12653,11 +12714,21 @@ msgstr ""
msgid "mount failed: "
msgstr ""
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter. Its result is stored as bogomips as a way to \"benchmark\" the cpu."
+msgstr ""
+
#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+
#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
@@ -12678,15 +12749,6 @@ msgstr ""
msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\\\"%s\\\": if a sound card is detected on your system, it is displayed here.\n"
-"If you notice the sound card displayed is not the one that is actually\n"
-"present on your system, you can click on the button and choose another\n"
-"driver."
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Webmin Service"
@@ -12712,15 +12774,6 @@ msgstr ""
msgid "Greece"
msgstr ""
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \\\"New\\\"."
-msgstr ""
-
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
@@ -12772,27 +12825,11 @@ msgstr ""
msgid "Give the ram size in MB"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \\\"%s\\\" on server \\\"%s\\\""
-msgstr ""
-
#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-" Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\\\"%s\\\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
#: ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1
#, c-format
msgid "done"
@@ -12902,11 +12939,6 @@ msgstr ""
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \\\"%s\\\", port %s"
-msgstr ""
-
#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
@@ -12987,59 +13019,6 @@ msgstr ""
msgid "Do you have another one?"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various groups, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' group installed.\n"
-"\n"
-" * \\\"%s\\\": if you plan to use your machine as a workstation, select one or\n"
-"more of the applications that are in the workstation group.\n"
-"\n"
-" * \\\"%s\\\": if plan on using your machine for programming, choose the\n"
-"appropriate packages from that group.\n"
-"\n"
-" * \\\"%s\\\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \\\"%s\\\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \\\"%s\\\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \\\"%s\\\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \\\"%s\\\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command line interface. The total size of this installation is about 65\n"
-"megabytes.\n"
-"\n"
-"You can check the \\\"%s\\\" box, which is useful if you are familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you started the installation in \\\"%s\\\" mode, you can unselect all groups\n"
-"to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
@@ -13050,23 +13029,6 @@ msgstr ""
msgid "Assign host name from DHCP address"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. Now you can scan with \\\"scanimage\\\" (\\\"scanimage -d hp:%s\\\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \\\"xscanimage\\\" or \\\"xsane\\\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \\\"File\\\"/\\\"Acquire\\\" menu. Call also \\\"man scanimage\\\" on the command line to get more information.\n"
-"\n"
-"Do not use \\\"scannerdrake\\\" for this device!"
-msgstr ""
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \\\"%s\\\" in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
@@ -13196,11 +13158,6 @@ msgstr ""
msgid "Suriname"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid "Our full range of Linux solutions, as well as special offers on products and other \\\"goodies\\\", are available on our e-store:"
-msgstr ""
-
#: ../../any.pm:1
#, c-format
msgid "Enable ACPI"
@@ -13284,6 +13241,26 @@ msgstr ""
msgid "Username required"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
@@ -13441,14 +13418,6 @@ msgstr ""
msgid "Normal Mode"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"A printer named \\\"%s\\\" already exists under %s. \n"
-"Click \\\"Transfer\\\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
@@ -13492,6 +13461,11 @@ msgstr ""
msgid "Restarting CUPS..."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr ""
+
#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
@@ -13512,6 +13486,22 @@ msgstr ""
msgid "Unknown|Generic"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+
#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakperm:1 ../../standalone/draksplash:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
@@ -13537,43 +13527,22 @@ msgstr ""
msgid "Other MultiMedia devices"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
+#, c-format
+msgid "No remote machines"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\\\"/\\\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \\\"/home\\\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \\\"Name\\\", \\\"Capacity\\\".\n"
-"\n"
-"\\\"Name\\\" is structured: \\\"hard drive type\\\", \\\"hard drive number\\\",\n"
-"\\\"partition number\\\" (for example, \\\"hda1\\\").\n"
"\n"
-"\\\"Hard drive type\\\" is \\\"hd\\\" if your hard drive is an IDE hard drive and\n"
-"\\\"sd\\\" if it is a SCSI hard drive.\n"
-"\n"
-"\\\"Hard drive number\\\" is always a letter after \\\"hd\\\" or \\\"sd\\\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \\\"a\\\" means \\\"master hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"b\\\" means \\\"slave hard drive on the primary IDE controller\\\";\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-" * \\\"c\\\" means \\\"master hard drive on the secondary IDE controller\\\";\n"
+"This wizard will help you to install your printer(s) connected to this computer.\n"
"\n"
-" * \\\"d\\\" means \\\"slave hard drive on the secondary IDE controller\\\".\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
-"With SCSI hard drives, an \\\"a\\\" means \\\"lowest SCSI ID\\\", a \\\"b\\\" means\n"
-"\\\"second lowest SCSI ID\\\", etc."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
msgstr ""
#: ../../install_steps_interactive.pm:1
@@ -13611,13 +13580,6 @@ msgstr ""
msgid "Thailand"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \\\"fileshare\\\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
@@ -13658,108 +13620,13 @@ msgstr ""
msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \\\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\\\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \\\"#type\\\" entry is only used by drakTermServ. Clients can either be \\\"thin\\\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Change your Cd-Rom!\n"
"\n"
-""
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
#: ../../keyboard.pm:1
@@ -13859,6 +13726,35 @@ msgstr ""
msgid "Your choice? (0/1, default `%s') "
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
+
#: ../../keyboard.pm:1 ../../keyboard.pm:1
#, c-format
msgid "French"
@@ -13889,15 +13785,6 @@ msgstr ""
msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program. Just type \\\"sndconfig\\\" in a console."
-msgstr ""
-
#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
#, c-format
msgid "Next"
@@ -13934,6 +13821,18 @@ msgstr ""
msgid "Puerto Rico"
msgstr ""
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr ""
+
#: ../../install_any.pm:1
#, c-format
msgid ""
@@ -14023,11 +13922,6 @@ msgstr ""
msgid "Restore from Hard Disk."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \\\"sndconfig\\\" after installation to configure your sound card"
-msgstr ""
-
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
@@ -14105,11 +13999,6 @@ msgstr ""
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing on the printer \\\"%s\\\""
-msgstr ""
-
#: ../../services.pm:1
#, c-format
msgid ""
@@ -14152,11 +14041,6 @@ msgstr ""
msgid "ethernet card(s) detected"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Error: The \\\"%s\\\" driver for your sound card is unlisted"
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
@@ -14182,6 +14066,11 @@ msgstr ""
msgid "Set root password"
msgstr ""
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
+msgstr ""
+
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
@@ -14207,11 +14096,6 @@ msgstr ""
msgid "/_About..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Scanning on \\\"%s\\\""
-msgstr ""
-
#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
@@ -14282,11 +14166,6 @@ msgstr ""
msgid "Done"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To get a list of the options available for the current printer click on the \\\"Print option list\\\" button."
-msgstr ""
-
#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
@@ -14309,6 +14188,14 @@ msgstr ""
msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+
#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
@@ -14319,11 +14206,6 @@ msgstr ""
msgid ", using command %s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to configure printer \\\"%s\\\"!"
-msgstr ""
-
#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
@@ -14402,6 +14284,47 @@ msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
+"\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
+"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
+"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
@@ -14426,44 +14349,6 @@ msgstr ""
msgid "Boot Floppy"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes were discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \\\"%s\\\". Clicking \\\"%s\\\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \\\"%s\\\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages have relationships between each other such\n"
-"that installation of a package requires that some other program is also\n"
-"rerquired to be installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
#: ../../keyboard.pm:1 ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
@@ -14474,11 +14359,6 @@ msgstr ""
msgid "Searching for new scanners ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \\\"number row\\\" QWERTY"
-msgstr ""
-
#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
@@ -14499,30 +14379,6 @@ msgstr ""
msgid "Configure bootsplash picture"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \\\"%s\\\": For the most part, this completely wipes out the old system. If\n"
-"you wish to change how your hard drives are partitioned, or change the file\n"
-"system, you should use this option. However, depending on your partitioning\n"
-"scheme, you can prevent some of your existing data from being over-written.\n"
-"\n"
-" * \\\"%s\\\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \\\"8.1\\\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \\\"8.1\\\" is not recommended."
-msgstr ""
-
#: ../../lang.pm:1 ../../lang.pm:1
#, c-format
msgid "China"
@@ -14587,20 +14443,9 @@ msgstr ""
msgid "SCSI controllers"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \\\"%s\\\"\n"
-"if you have a working Internet connection, or \\\"%s\\\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \\\"%s\\\" will display a list of places from which updates can be\n"
-"retrieved. You should choose one nearer to you. A package-selection tree\n"
-"will appear: review the selection, and press \\\"%s\\\" to retrieve and install\n"
-"the selected package(s), or \\\"%s\\\" to abort."
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
#: ../../standalone/drakedm:1
@@ -14638,32 +14483,22 @@ msgstr ""
msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Shell"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \\\"%s\\\".\n"
-"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
-"this detection fails, uncheck the \\\"%s\\\" box. You may also choose not to\n"
-"configure the network, or to do it later, in which case clicking the \\\"%s\\\"\n"
-"button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
msgstr ""
#: ../../network/isdn.pm:1
@@ -14860,6 +14695,14 @@ msgid ""
"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+
#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
@@ -14915,11 +14758,37 @@ msgstr ""
msgid "Panama"
msgstr ""
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+
#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"\n"
+""
+msgstr ""
+
#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
@@ -15007,11 +14876,6 @@ msgstr ""
msgid "/File/_Save"
msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "Rate should have the suffix k, M or G (for example, \\\"11M\\\" for 11M), or add enough '0' (zeroes)."
-msgstr ""
-
#: ../../lang.pm:1
#, c-format
msgid "Mali"
@@ -15054,6 +14918,11 @@ msgstr ""
msgid "Allow Thin Clients"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Russian\" layout)"
+msgstr ""
+
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_Options"
@@ -15164,6 +15033,16 @@ msgid ""
""
msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are good."
+msgstr ""
+
#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
@@ -15182,6 +15061,59 @@ msgid ""
" Enable/Disable sulogin(8) in single user level."
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+
#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Accept user"
@@ -15224,6 +15156,11 @@ msgstr ""
msgid "Gateway address should be in format 1.2.3.4"
msgstr ""
+#: ../../network/modem.pm:1
+#, c-format
+msgid "\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
@@ -15309,6 +15246,11 @@ msgstr ""
msgid "Austria"
msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+
#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
@@ -15329,6 +15271,34 @@ msgstr ""
msgid "Where do you want to install the bootloader?"
msgstr ""
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+
#: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
@@ -15568,6 +15538,11 @@ msgstr ""
msgid "Configure X"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Turkish (traditional \"F\" model)"
+msgstr ""
+
#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Congratulations!"
@@ -15593,6 +15568,13 @@ msgstr ""
msgid "Install rpm"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
+""
+msgstr ""
+
#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
@@ -15746,11 +15728,6 @@ msgid ""
""
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \\\"%s\\\" on server \\\"%s\\\""
-msgstr ""
-
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
@@ -15771,6 +15748,13 @@ msgstr ""
msgid "Make kernel message quiet by default"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+
#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP end range"
@@ -15813,6 +15797,11 @@ msgstr ""
msgid "dismiss"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr ""
+
#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit raid modules"
@@ -15835,6 +15824,11 @@ msgstr ""
msgid "comma separated numbers"
msgstr ""
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
+msgstr ""
+
#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule up one level"
@@ -15850,6 +15844,11 @@ msgid ""
""
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr ""
+
#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
@@ -15896,19 +15895,6 @@ msgstr ""
msgid "Liberia"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \\\"%s\\\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\\\"Latin\\\" layout)"
-msgstr ""
-
#: ../../standalone/drakgw:1
#, c-format
msgid ""
@@ -15936,6 +15922,11 @@ msgstr ""
msgid "Automatic correction of CUPS configuration"
msgstr ""
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Running \"%s\" ..."
+msgstr ""
+
#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
@@ -16065,6 +16056,15 @@ msgstr ""
msgid "No image found"
msgstr ""
+#: ../../install_steps.pm:1
+#, c-format
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
+""
+msgstr ""
+
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Detected model: %s"
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
index 3906813e8..0dd888b07 100644
--- a/perl-install/share/po/af.po
+++ b/perl-install/share/po/af.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2001-08-20 21:28-0000\n"
"Last-Translator: Schalk W. Cronj <schalkc@uk.ntaba.com>\n"
"Language-Team: Afrikaans <mandrake@af.org.za>\n"
@@ -15,2157 +15,1244 @@ msgstr ""
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Hegpunte vir partisies word nou gesoek"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "\t\tErase=%s"
msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
#
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS word gelaai"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Nog"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Wat is u muistoestel?"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Resolusie"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Country"
-msgstr "Heg"
+msgid "network printer port"
+msgstr "Netwerkdrukker (sok)"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "Kies u taal"
+msgid "Please insert floppy disk:"
+msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
+"Wil u voortgaan?"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
+msgid "Which username"
+msgstr "Gebruikerskode"
#: ../../any.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
+msgid "Which type of entry do you want to add?"
+msgstr "Watter tipe inskrywing wil u byvoeg?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Wil u aboot gebruik?"
+msgid "Restore partition table"
+msgstr "Reddingspartisietabel"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "Gebruikerskode"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS-bediener IP:"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Real name"
-msgstr "Regte naam"
+msgid "Post-install configuration"
+msgstr "Postinstallasiekonfigurasie"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
+msgid "Use ``%s'' instead"
+msgstr "Gebruik ``%s'' instede."
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Done"
-msgstr "Klaar"
+msgid "Type"
+msgstr "Tipe"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
+msgid "Sri Lanka"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
+msgid "Central African Republic"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Probeer asb. weer"
+msgid "Gateway device"
+msgstr "Netwerkportaaltoestel"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
+msgid "Net Method:"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Ethernetkaart"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "access to compilation tools"
-msgstr ""
+msgid "Parameters"
+msgstr "Parameters"
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect"
+msgstr "Gebruik outobespeuring"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "access to administrative files"
-msgstr ""
+msgid "Interface:"
+msgstr "Koppelvlak:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr ""
+msgid "Select installation class"
+msgstr "Kies installasieklas"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to rpm tools"
+msgid "on CDROM"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
+"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
+"Probeer om u stelsel te herkonfigureer."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belarus"
+msgstr "Belarussies"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
+msgid "Error writing to file %s"
+msgstr "Fout in die skryf van %s"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd word gebruik om battery status te monitor en dit dan te log via "
+"syslog.\n"
+"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
+"swak is."
-#: ../../any.pm:1
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use tape to backup"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../any.pm:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
+msgid "The following packages are going to be installed"
+msgstr "Die volgende pakkette gaan installeer word"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
+msgid "CUPS configuration"
+msgstr "Konfigurasie"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "Hong Kong"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Le etiket word nie toegelaat nie"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiket"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Onveilig"
+msgid "Moving"
+msgstr "Verskuiwing"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Table"
-msgstr "Tabel"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root"
-msgstr "Basis"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lees-skryf"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Welkom by die Netwerkkonfigurasie-assistent\n"
+"\n"
+"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
+"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Video mode"
-msgstr "Videomodus"
+msgid "Lebanon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Image"
-msgstr "Beeld"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "Sektor"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s bespeur"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Selekteer lOer"
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Armenies (Foneties)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Open Firmware Delay"
+msgid "The DHCP start ip"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "Herlaaistelsel hoofopsies"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Kompak"
+msgid "Tape"
+msgstr "Tipe"
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Konneksie word begin..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
+msgid "Malaysia"
+msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
+msgid "Swiss (French layout)"
+msgstr "Switsers (Franse uitleg)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO installasie"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Stoor op floppie"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Eerste sektor van herlaaipartisie"
+msgid "Soundcard"
+msgstr "Klankkaart"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
+msgid "Level %s\n"
+msgstr "Vlak %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+msgid "Luxembourg"
msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
+" DrakBackup Daemon Report\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
+msgid "Iran"
+msgstr "Iranies"
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
+msgid "Bus"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
+msgid "Iraq"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
+msgid "Configuring..."
+msgstr "Konfigurasie in aabou..."
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Password (again)"
+msgstr "Wagwoord (weer)"
-#: ../../bootloader.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
+msgid "Venezuela"
+msgstr ""
-#: ../../bootloader.pm:1
+#
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
+msgid "IP address"
+msgstr "IP adres"
-#: ../../bootloader.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Choose the sizes"
+msgstr "Kies die groottes"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"List of data corrupted:\n"
"\n"
msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "consolehelper missing"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu is weg"
+msgid "Choose another partition"
+msgstr "Kies 'n ander partisie"
-#: ../../common.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+msgid "Current user"
+msgstr "Aanvaar gebruiker"
-#: ../../common.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "Username"
+msgstr "Gebruikerskode"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "United States"
+msgid "Left \"Windows\" key"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "seriaal"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Italy"
-msgstr "Italiaans"
+msgid "dhcpd Server Configuration"
+msgstr "Sluit konfigurasie af"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Netherlands"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Sien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Norweegs"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Grieks"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Czech Republic"
+msgid "Guyana"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belgies"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Frankryk"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Costa Rica"
+msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr "U benodig 'n ware l阤rstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
+msgid "Remove a module"
+msgstr "Verwyder module"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie l阤rgids moet altyd in die wortell阤rstelsel bly"
+msgid "Password"
+msgstr "Wagwoord"
-#: ../../fsedit.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "Sluit konfigurasie af"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
+msgid "Scanning on your HP multi-function device"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
+msgid "Root"
+msgstr "Basis"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error"
-msgstr "Fout"
+msgid "Choose an existing RAID to add to"
+msgstr "Kies 'n bestaande RAID om by toe te voeg"
-#: ../../fsedit.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "server"
-msgstr "bediener"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turks (moderne \"Q\" modem)"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "with /usr"
+msgid "Lilo message not found"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
+msgid "if needed"
+msgstr "indien nodig"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Partisie %s word formateer"
+msgid "Restore Failed..."
+msgstr "Herstel vanaf l阤r"
-#: ../../fs.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "LPD word verwyder..."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "L阤r %s word geskep en formatteer"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
+msgid "/Autodetect _jazz drives"
+msgstr "Gebruik outobespeuring"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
+"Description:\n"
"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
+"Introduction\n"
"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
+"1. License Agreement\n"
"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
+"2. Limited Warranty\n"
"\n"
-"For Linux, there are a few possible options:\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
+"3. The GPL License and Related Licenses\n"
"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
+"4. Intellectual Property Rights\n"
"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"5. Governing Laws \n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Verander drukkerkonfigurasie"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Lyndrukkerdiensprogram"
+
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
"\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of oor 'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
+"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
+"wees.\n"
"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
+"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "Druk toetsbladsy(e)"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Gurmukhi"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Force No APIC"
msgstr ""
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Sleutelbord"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP instaanbediener"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+"Change\n"
+"Restore Path"
+msgstr "Herstel vanaf l阤r"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Show only for the selected day"
msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
-#: ../../help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This dialog allows to finely tune your bootloader:\n"
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
msgstr ""
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+msgid "Logs"
msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-#: ../../help.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "What kind of card do you have?"
+msgstr "Oor watter tipe kaart beskik u?"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Security"
+msgstr "Sekuriteit"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Onbekende model"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "Network Configuration"
+msgstr "Netwerkkonfigurasie"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"Protokol vir die res vd w阹eld \n"
+" geen D-Kanaal nie (bruikhuurlyne)"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Opsie %s moet 'n nommer wees"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "Geen video"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
+"Arguments: (arg)\n"
"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+" Activate/Disable daily security check."
msgstr ""
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
+"Arguments: (arg)\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+msgid "You have not configured X. Are you sure you really want this?"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "What type of partitioning?"
+msgstr "Watter tipe van partisionering?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Koppelvlak"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+" - Backup Other Files: \n"
"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"Options\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
msgstr ""
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-#: ../../help.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Formateer partisies"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "These are the machines from which the scanners should be used:"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om di rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
+msgid "Messages"
+msgstr "Beginboodskap"
-#: ../../help.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "LDAP-bediener"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "Muis"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Formatering"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+msgid "Rwanda"
msgstr ""
-#: ../../help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Do you have any %s interfaces?"
+msgstr "Het u enige %s koppelvlakke?"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Switzerland"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Brunei Darussalam"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
+msgid "Remote lpd Printer Options"
+msgstr "Eksterne lpd drukkeropsies"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
"eie\n"
@@ -2208,4024 +1295,4516 @@ msgstr ""
"gebruiker wil verander.\n"
"Dit is bash by verstek."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Internet Access..."
+msgstr "Konfigureer internettoegang..."
+
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
+msgid "Norway"
+msgstr "Norweegs"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Danish"
+msgstr "Deens"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
-#: ../../install2.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "You must also format %s"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
+"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
+"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
+"(1.2.3.4) gegee word."
-#: ../../install2.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Processors"
msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe l阤rstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "Hongaars"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van l阤r %s"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
-#: ../../install_any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Korrupte rugsteunl阤r"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
+msgid "SMB server IP"
+msgstr "SMB-bediener IP:"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Partisietabel van skyf %s gaan opdateer word!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "Installeer pakket %s"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
msgstr ""
+"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
+"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
+"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
+"LILO\n"
+"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
+"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
+"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
+"%s"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Nee"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "Latvian"
+msgstr "Latvies"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "monthly"
msgstr ""
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Kleurkonfigurasie"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Module name"
+msgstr "Modulenaam"
-#: ../../install_gtk.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO installasie"
+msgid "Start at boot"
+msgstr "Gelaai tydens herlaaityd"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
+msgid "First sector of drive (MBR)"
+msgstr "Eerste sektor van skyf (MBR)"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
+msgid "Joystick"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
+msgid "El Salvador"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
+msgid "Trying to rescue partition table"
+msgstr "Partisietabel Reddingspoging"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
+msgid "Option %s must be an integer number!"
+msgstr "Opsie %s moet 'n heeltal wees!"
-#: ../../install_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Kon nie die intydse opgradering begin nie !!!\n"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
+msgid "Name: "
+msgstr "Naam: "
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
+msgid "16 million colors (24 bits)"
+msgstr "16-miljoen kleure (24 bis)"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "Allow all users"
+msgstr "Voeg 'n gebruiker by"
+
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
+msgid "Resizing"
+msgstr "Grootteverandering"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabelkonneksie"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Gebruikerskode"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
msgstr ""
+"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
+"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
+"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
+"(fout is %s)\n"
+"\n"
+"Will u al die partisies verwyder?\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Drukkerbedienernaam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Naam: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Windowsl阤rstelselgrense word bereken"
+msgid "mkraid failed"
+msgstr "mkraid het gefaal"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Grootteverandering"
+msgid "Button 3 Emulation"
+msgstr "Knop-3 emulasie"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "Stoor in l阤r"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelies (Foneties)"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
+msgid "access to rpm tools"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+msgid "You must choose/enter a printer/device!"
+msgstr "Tik drukkertoestel URI in"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
+msgid "Phone number"
+msgstr "Telefoonnommer"
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Printer name, description, location"
+msgstr "Drukkernaam,. beskrywing, ligging"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "Kies asb. 'n taal om te gebruik."
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
+msgid "Use Xinerama extension"
+msgstr "Gebruik Xinerama-ekstensies"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+msgid "Loopback"
+msgstr "Teruglus"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"Kon nie mkbootdisk ordentelik afsluit nie:\n"
+" %s \n"
+" %s"
+
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "West Europe"
+msgstr "Europa"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Hardeskyfdeteksie."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
+msgid "Copying %s"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Kies 'n monitor"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
+msgid "Dominican Republic"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
+msgid "Swaziland"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
+msgid "Set-UID"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Kliek asb. op 'n partisie"
+
+#: ../../help.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
+msgid " on parallel port \\#%s"
+msgstr ""
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Gebruik bestaande partisies"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr ""
+"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
+"word."
-#: ../../install_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "Generic 2 Button Mouse"
+msgstr "Generiese 2-knop muis"
-#: ../../install_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
+msgid "Remove the logical volumes first\n"
+msgstr "Verwyder eers die logiese volumes\n"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internettoegang"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Bedieneers word aktiveer..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Toetsbladsy(e) word gedruk..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
"\n"
-"%s\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
"\n"
+"Depending on your hard drive configuration, several options are available:\n"
"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
"\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-"%s\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisi雔e Liux-Mandrake Gebruikersgids."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "Ukranies"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Magtiging"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "External ISDN modem"
+msgstr "Eksterne ISDN-kaart"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "Your choice? (default %s) "
+msgstr "U keuse? (verstek %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Resolusie"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-"4. Intellectual Property Rights\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"5. Governing Laws \n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
+"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
+"Drukstatus:\n"
+"%s\n"
+"\n"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Help"
+msgid "daily"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "herkonfigureer"
+msgid "and one unknown printer"
+msgstr "Voeg drukker by"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Konfigureer"
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Yslandies"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
+msgid "kernel version"
+msgstr "bedryfstelselkernweergawe"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "Netwerkkonfigurasie"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Is dit korrek?"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf di CDROM te vermy."
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
-#
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Weier"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "Konfigurasie"
-#
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Accept"
-msgstr "Aanvaar "
+msgid "Autoprobe"
+msgstr "Aftas"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
+msgid "Backup system files..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "Detail"
+msgid "Removing printer \"%s\"..."
+msgstr "Drukkerdata word gelees..."
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Details"
-msgstr "Detail"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Wag asb. installasie word voorberei"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Time remaining "
-msgstr "Tyd oor "
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Skatting"
+msgid "Peru"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Muistoestel: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing"
-msgstr "Besig met installasie"
+msgid "Remove Windows(TM)"
+msgstr "Verwyder Windows(TM)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimale installasie"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
+msgid "Madagascar"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Vorige"
+msgid "Urpmi"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Installasie"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "System"
+msgstr "Stelselmode"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Wil u aboot gebruik?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+msgid "Arabic"
msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge飊stalleer"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "Opsies"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Wagwoord"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
+msgid "%d minutes"
+msgstr "%d minute"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
+msgid "Graphics card: %s"
+msgstr "Videokaart: %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "WebDAV transfer failed!"
msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
+msgid "XFree configuration"
+msgstr "XFree-konfigurasie"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
+msgid "Choose action"
+msgstr "Kies aksie"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
+msgid "French Polynesia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Foutiewe pakket"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Other"
-msgstr "Ander"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
+msgid "Installing driver for %s card %s"
+msgstr "Drywer vir %s kaart %s in installasieproses"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Volgende ->"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Datbasis"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
+msgid "Ukrainian"
+msgstr "Ukranies"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Automated"
-msgstr "Outomaties"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "geen netwerkkaart gevind nie"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Replay"
-msgstr "Herspeel"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Verwyder Windows(TM)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Basis"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
msgid ""
-"Some steps are not completed.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Do you really want to quit now?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
+"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
+"enige ander\n"
+"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
+"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
+"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
"\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Outoinstallasieskyf word geskep."
+"\n"
+"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
+"nodige\n"
+"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
+"betrokke bedryfstelsels te laai."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n le floppie in aandrywer %s"
+msgid "System mode"
+msgstr "Stelselmode"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
+"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
+"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
+"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
+"die drukkernaam; toepaslike gebruikerskode en wagwoord."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
+#
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmasker"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
+msgid "Append"
+msgstr "Aanlas"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Herlaaistelsel word voorberei"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Domeinnaam"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "LDAP-magtiging"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netwerkdrukker (sok)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
+"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS-bediener"
+msgid "OK to restore the other files."
+msgstr ""
#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-domein"
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "Wat is u sleutelborduitleg?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
+msgid "Printer Device URI"
+msgstr "Drukkertoestel URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
+msgid "Terminal-based"
+msgstr "Terminaaltipe"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Hierdie genruikerskode bestaan alreeds"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "LDAP"
-msgstr "KDAP"
+msgid "Other OS (windows...)"
+msgstr "Ander bedryfstelsel (windows...)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local files"
-msgstr "Plaaslike l阤rs"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
-#, c-format
-msgid "Authentication"
-msgstr "Magtiging"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Drukkerdata word gelees..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
+msgid "Generate auto install floppy"
+msgstr "Skep outoinstallasieskyf"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password"
-msgstr "Geen wagwoord"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "NIS-domein"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "No open source driver"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
+"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
+"Sekuriteitseienskappe is maksimaal."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "System"
-msgstr "Stelselmode"
+msgid "Nicaragua"
+msgstr ""
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Poort"
+msgid "New Caledonia"
+msgstr "Masedonies"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Herlaaistelsel om te gebruik"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Europese protokol (EDSS1)"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Basis"
+#: ../../any.pm:1
+#, c-format
+msgid "Video mode"
+msgstr "Videomodus"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "disabled"
-msgstr "deaktiveer"
+msgid "Please enter your email address below "
+msgstr "Probeer asb. weer"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "activated"
-msgstr "Aktiveer nou dadelik"
+msgid "Oman"
+msgstr "NIS-domein"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Vuurmuur/Netwerkroteerder"
+msgid "Network Monitoring"
+msgstr "Netwerkkonfigurasie"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sekuriteit"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "New size in MB: "
+msgstr "Nuwe grootte in MB: "
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Network"
-msgstr "Netwerkkoppelvlak"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "Partisietabeltipe: %s\n"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Netwerkkoppelvlak"
+msgid "Authentication Windows Domain"
+msgstr "LDAP-magtiging"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X met herlaai"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard"
+msgstr "VSA sleutelbord"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Buttons emulation"
+msgstr "Knoppie-emulasie"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-kaaer"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor nog?"
+msgid "Sending Speed:"
+msgstr "Stoor in l阤r"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sound card"
-msgstr "Klankkaart"
+msgid "Halt bug"
+msgstr ""
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Konfigurasie"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "Geen drukker"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer"
-msgstr "Drukker"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estoniaans"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Muis"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Wag asb."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Timezone"
-msgstr "Tydsone"
+msgid "Connection speed"
+msgstr "Konneksiespoed"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Keyboard"
-msgstr "Sleutelbord"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Summary"
-msgstr "Opsomming"
+msgid "Namibia"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "NTP-bediener"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Datbasis"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
+"bied,\n"
+"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
+"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kon nie vurk nie: %s"
+msgid "Please wait, setting security options..."
+msgstr "Wag asb. installasie word voorberei"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Spie雔 word gekontak vir die lys van pakkette"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spie雔 waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Spie雔 word gekontak vir die lys van pakkette"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Laai X-Windowstelsel met herlaai"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "hourly"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
+msgid "Antigua and Barbuda"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
+msgid "Spanish"
+msgstr "Spaans"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Toestand"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Alles"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Konfigureer drukker"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "Normale modemkonneksie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "With X"
-msgstr "Wag"
+msgid "File Selection"
+msgstr "Pakketkeuse"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Type of install"
-msgstr "Kies pakket om te installeer"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Pakketkeuse"
+msgid "Bootloader installation"
+msgstr "Herlaaiprogram installasie"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
+msgid "Root partition size in MB: "
+msgstr "Basispartisiegrootte in MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Etherboot ISO image is %s"
msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../services.pm:1
+#, fuzzy, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
+"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
+"rekenaarname na IP-adresse toe om te skakel."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Soek vir beskikbare pakkette"
+msgid "Disconnect..."
+msgstr "Diskonnekteer..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge飊stalleer"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
+msgid "Report"
+msgstr "Poort"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+msgid "Palau"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
+msgid "level"
+msgstr "vlak"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
+msgid "Package Group Selection"
+msgstr "Kies pakketgroepe"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
+msgid "Choose the resolution and the color depth"
+msgstr "Kies die resolusie en kleurdiepte"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "No partition available"
-msgstr "geen beskikbare partisies"
+msgid "Emulate third button?"
+msgstr "Emuleer derde knop?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Mount"
+msgstr "Heg"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Outoinstallasieskyf word geskep."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Installeer stelsel"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
+msgid "text box height"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
+msgid "State"
+msgstr "Toestand"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
+msgid "Be sure a media is present for the device %s"
+msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
+msgid "Enable multiple profiles"
+msgstr "Gebruik multiprofiele"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Installeer/Opgradeer"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
+msgid "Local printer"
+msgstr "Plaaslike drukker"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Quit"
-msgstr "Verlaat"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
+msgid "Package selection"
+msgstr "Pakketkeuse"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
+msgid "Mauritania"
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"Sekere belangrike pakkette het nie korrek ge飊stalleer nie.\n"
-"觙 die CDROM-aandrywer 骹 die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
+msgid "All primary partitions are used"
+msgstr "Alle prim阹e partisies is gebruik"
-#: ../../install_steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
+"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
+"om die rekenaarnaamveranderingprobleem te voorkom."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Wag asb."
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Sluit konfigurasie af"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ok"
-msgstr "OK"
+msgid "Configuring IDE"
+msgstr "IDE word opgestel"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Monitor is nie opgestel nie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Stel muistoestel op"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Finish"
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Konnekteer aan die internet"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Basic"
-msgstr ""
+msgid "You'll need to reboot before the modification can take place"
+msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-#: ../../interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Advanced"
-msgstr "Gevorderd"
+msgid "Provider phone number"
+msgstr "Voorsiener se telefoonnommer"
#
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Verwyder drukker"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, c-format
-msgid "Modify"
-msgstr "Verander"
+msgid "Host %s"
+msgstr "Rekenaarnaam"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "Voeg by"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Armenia"
+msgstr "Armenies (oud)"
-#: ../../interactive.pm:1
-#, c-format
-msgid "Choose a file"
-msgstr "Kies 'n l阤r"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Fiji"
+msgstr "Finnies"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "Second floppy drive"
+msgstr "Tweede sagteskyfaandrywer"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "\"Menu\" key"
+msgid "About Harddrake"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid "Drive capacity"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
+"Sit 'n floppie in die aandrywer.\n"
+"Alle data op hierdie floppie sal verloor word."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "Size: %s"
+msgstr "Grootte: %s"
#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d sekondes"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right Alt key"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Netwerkkonfigurasie"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../keyboard.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vi雝namees \"nommerry\" QWERTY"
+msgid "No password"
+msgstr "Geen wagwoord"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nigeria"
+msgstr "seriaal"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
+msgid "There is no existing partition to use"
+msgstr "Daar is geen bestaande partisies om te gebruik nie"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Ukrainian"
-msgstr "Ukranies"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
+"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
+"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
+"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
+"wat saam met die hardeware gekom het."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
+msgid "Hard drive information"
+msgstr "Hardeskyfinligting"
#: ../../keyboard.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
+msgid "Russian"
+msgstr "Russies"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Iranies"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid het gefaal"
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armenies (tikmasjien)"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Eksterne drukker"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Tamil (ISCII-layout)"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
+msgid "Sorry, no floppy drive available"
+msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
+msgid "Bolivia"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Sloveens"
+msgid "Bad package"
+msgstr "Foutiewe pakket"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Swedish"
-msgstr "Sweeds"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Opsies"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Russian"
-msgstr "Russies"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Romania"
+msgstr "NIS-domein"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Herlaaitoestel"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Canada"
msgstr "Kanadees (Quebec)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
+msgid "Remove from LVM"
+msgstr "Verwyder uit LVM"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norweegs"
+msgid "Timezone"
+msgstr "Tydsone"
#: ../../keyboard.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Nederlands"
+msgid "German"
+msgstr "Duits"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "Next ->"
+msgstr "Volgende ->"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
+"\n"
+"Dis hoogs waarskynlik dat hierdie partisie\n"
+"drywerpartisie is en verkieslik alleen gelos\n"
+"moet word.\n"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Malayalam"
+msgid "Guinea-Bissau"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
+msgid "Horizontal refresh rate"
+msgstr "Horisontale verfristempo"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
+"gebruik word. Verwyder eers die teruglus."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
+msgid "USB controllers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "Latvies"
+msgid "What norm is your TV using?"
+msgstr "Watter tipe is u ISDN-konneksie?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
+msgid "Type:"
+msgstr "Tipe:"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
+msgid "Share name"
+msgstr "Drukkernaam:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
+msgid "enable"
+msgstr "Aktiveer"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Spie雔 word gekontak vir die lys van pakkette"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Inuktitut"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
+"Daar was 'n probleem met die herlaai van die netwerk.\n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "Italiaans"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove the loopback file?"
+msgstr "Teruglusl阤r %s word geformateer"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Yslandies"
+msgid "Selected size is larger than available space"
+msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Iranies"
+msgid "NCP server name missing!"
+msgstr "NCP-bedienernaam ontbreek!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Wat is u muistoestel?"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli"
-msgstr "Israelies"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Korrupte rugsteunl阤r"
#: ../../keyboard.pm:1
-#, c-format
-msgid "Croatian"
-msgstr "Kroaties"
+#, fuzzy, c-format
+msgid "Laotian"
+msgstr "Latvies"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Hongaars"
+msgid "Samoa"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Gurmukhi"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
+"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
+"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gujarati"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "Grieks"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Selekteer 'n videokaart"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Frans"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "verpligtend"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finnies"
+msgid "Welcome To Crackers"
+msgstr "Krakers welkom"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spaans"
+msgid "Module options:"
+msgstr "Module opsies:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Estonian"
-msgstr "Estoniaans"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
+msgid "Go on without configuring the network"
+msgstr "Stel netwerk op"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Danish"
-msgstr "Deens"
+msgid "Abort"
+msgstr "Aborteer"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
+msgid "No password prompt on %s at port %s"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German"
-msgstr "Duits"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Gebruik beskikbare spasie"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
#: ../../keyboard.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norweegs)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estoniaans"
+msgid "Unable to fork: %s"
+msgstr "Kon nie vurk nie: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars"
+msgid "Type: "
+msgstr "Tipe:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Armenies (Foneties)"
+msgid "<-- Edit Client"
+msgstr "DHCP-Kli雗t"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "Aktiveer"
+msgid "no fonts found"
+msgstr "%s is nie gevind nie"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belgies"
+msgid "Mouse"
+msgstr "Muis"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
+msgid "not enough room in /boot"
+msgstr "nie genoeg spasie in /boot nie"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Arabic"
+msgid "Choosing an arbitratry driver"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm:1
+#
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
+msgid "Host name"
+msgstr "Rekenaarnaam"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
+msgid "Liechtenstein"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Albanian"
-msgstr "Albanies"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish"
-msgstr "Pools"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "moontlik"
+msgid "Add to RAID"
+msgstr "Voeg by RAID"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zambia"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Africa"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "seriaal"
+msgid "No floppy drive available!"
+msgstr "Geen sagteskyaandrywer beskikbaar nie"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mayotte"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Yemen"
-msgstr ""
+msgid "Continue anyway?"
+msgstr "Wil u in elk geval voortgaan?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Samoa"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
+msgid "Printer"
+msgstr "Drukker"
#: ../../lang.pm:1
#, c-format
-msgid "Vanuatu"
+msgid "Saudi Arabia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Vietnam"
-msgstr ""
+msgid "Internet"
+msgstr "Internet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid "Some devices were added:\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Latvies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Uzbekistan"
-msgstr ""
+msgid "Restore From Tape"
+msgstr "Reddingspartisietabel"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Uruguay"
-msgstr ""
+msgid "Choose the profile to configure"
+msgstr "Kies die profiel om te konfigureer"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Uganda"
-msgstr "Opgradeer"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Ukraine"
-msgstr "Ukranies"
+msgid "Backup Now from configuration file"
+msgstr "Netwerkkonfigurasie"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Latvies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+msgid "Restarting printing system..."
+msgstr "Watter drukkerstelsel verlang u?"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Trinidad and Tobago"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Turkey"
-msgstr ""
+msgid "See hardware info"
+msgstr "Sien hardeware inligting"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tonga"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Eerste sektor van herlaaipartisie"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tunisia"
-msgstr ""
+msgid "Printer manufacturer, model"
+msgstr "Drukkervervaardiger, model"
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Druk sonder drukkertou"
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "East Timor"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tokelau"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Tajikistan"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Thailand"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
msgstr ""
+"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
+"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
+"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
+"belangrikste.\n"
+"\n"
+"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite di van u\n"
+"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
+"kies konservatief."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Togo"
-msgstr ""
+msgid "Modify"
+msgstr "Verander"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French Southern Territories"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chad"
+msgid "Need hostname, username and password!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Swaziland"
+msgid "HardDrake"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Syria"
-msgstr ""
+msgid "new"
+msgstr "nuut"
-#: ../../lang.pm:1
-#, c-format
-msgid "El Salvador"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Wil u 'n drukwerk nou konfigureer?"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "Drukkernaam:"
+msgid "Wizard"
+msgstr "Assistent"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Somalia"
-msgstr "NIS-domein"
+msgid "Edit selected server"
+msgstr "%s bespeur"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Senegal"
-msgstr "Aktiveer"
+msgid "Please choose where you want to backup"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "San Marino"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sierra Leone"
+msgid "Do not include the browser cache"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "Sloveens"
-
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
+msgid "Please, choose your keyboard layout."
+msgstr "Wat is u sleutelborduitleg?"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "Sloveens"
+#: ../../mouse.pm:1 ../../security/level.pm:1
+#, c-format
+msgid "Standard"
+msgstr "Standaard"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Saint Helena"
-msgstr ""
+msgid "Please choose your mouse type."
+msgstr "Wat is u muistoestel?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Singapore"
-msgstr ""
+msgid "Connect..."
+msgstr "Konnekteer..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Konfigureer drukker"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Seychelles"
-msgstr "Dop"
+msgid "not configured"
+msgstr "herkonfigureer"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
-#, c-format
-msgid "Saudi Arabia"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Aborteer"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Russies"
+msgid "Proxies configuration"
+msgstr "Instaanbedienerkonfigurasie"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "NIS-domein"
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "Resolusie"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "Begin: sektor %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Qatar"
-msgstr "Toestand"
+msgid "Network interface already configured"
+msgstr "Monitor is nie opgestel nie"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Palau"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Paraguay"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Portugal"
-msgstr "Poort"
+msgid "Mail Server"
+msgstr "Datbasis"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Stoor pakketseleksie"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Please click on a partition"
+msgstr "Kliek asb. op 'n partisie"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Puerto Rico"
-msgstr "Protokol"
+#: ../../any.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "Druk"
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Have a nice day!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "across Network"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Poland"
-msgstr "Yslandies"
+msgid "Upgrade %s"
+msgstr "Opgradeer"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pakistan"
-msgstr ""
+msgid "Select Printer Connection"
+msgstr "Kies drukkerkonneksie"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Philippines"
+msgid "Scanning for TV channels in progress ..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Papua New Guinea"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "French Polynesia"
+msgid "IP Range Start:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Peru"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
msgstr ""
+"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
+"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
+"vir\n"
+"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
+"waarvoor\n"
+"inetd verantwoordelik is."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Panama"
+msgid "the height of the progress bar"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Oman"
-msgstr "NIS-domein"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niue"
-msgstr "Geen video"
-
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Nauru"
+msgid "Argentina"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Nepal"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Nicaragua"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Domeinnaam"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "seriaal"
+msgid "Security Level:"
+msgstr "Sekuriteitsvlak word gestel."
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "Hoog"
+msgid "Mount points must begin with a leading /"
+msgstr "Hegpunte moet met 'n / begin"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "New Caledonia"
-msgstr "Masedonies"
+msgid "Postfix Mail Server"
+msgstr "Postfix e-posbediener, Inn netnuusbediener"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Namibia"
-msgstr ""
+msgid "Quit without saving"
+msgstr "Verlaat, maar moenie iets stoor nie"
#: ../../lang.pm:1
#, c-format
-msgid "Mozambique"
+msgid "Yemen"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Malaysia"
+msgid "This product is available on the MandrakeStore Web site."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mexico"
-msgstr "Muis"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malawi"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
msgstr ""
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Maldives"
+msgid "=> There are many things to choose from (%s).\n"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mauritius"
-msgstr "Verskeie"
+#: ../../steps.pm:1
+#, c-format
+msgid "Hard drive detection"
+msgstr "Hardeskyfdeteksie."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Malta"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Montserrat"
-msgstr "Muispoort"
+msgid "Please enter the WebDAV server URL"
+msgstr "Toets asb. die muis"
#: ../../lang.pm:1
#, c-format
-msgid "Mauritania"
+msgid "Tajikistan"
msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Martinique"
-msgstr ""
+msgid "Accept"
+msgstr "Aanvaar "
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr ""
+msgid "Description"
+msgstr "Beskrywing"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mongolia"
-msgstr ""
+msgid "Error opening %s for writing: %s"
+msgstr "Four om %s in skryfmode te open: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Myanmar"
-msgstr ""
+msgid "Mouse type: %s\n"
+msgstr "Muistipe: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Mali"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
+"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Macedonia"
-msgstr "Masedonies"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Wat is u sleutelborduitleg?"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Marshall Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Madagascar"
-msgstr ""
+msgid "Expert Area"
+msgstr "Kundige area"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Moldova"
-msgstr ""
+msgid "Choose a monitor"
+msgstr "Kies 'n monitor"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Monaco"
-msgstr "Monitor"
+#: ../../any.pm:1
+#, c-format
+msgid "Empty label not allowed"
+msgstr "Le etiket word nie toegelaat nie"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Morocco"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Libya"
-msgstr ""
+msgid "I can't add any more partition"
+msgstr "Ek kan nie meer partisies byvoeg nie"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Latvia"
-msgstr "Latvies"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Size in MB: "
+msgstr "Grootte in MB: "
-#: ../../lang.pm:1
+#
+#: ../../printer/main.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Remote printer"
+msgstr "Eksterne drukker"
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "Kies asb. 'n taal om te gebruik."
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Lithuania"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
+"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
+"konnekteer.\n"
+"U kan die toestel net so aanvaar.\n"
+"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
+"Verlang u hierdie funksionaliteit?"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Liberia"
-msgstr "seriaal"
+msgid "Floppy format"
+msgstr "Formatteer"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sri Lanka"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Drukker"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Saint Lucia"
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Eerste sektor van herlaaipartisie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Alternatiewe toetsbladsy (A4)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Laos"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Maak boom toe"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kazakhstan"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cayman Islands"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Kuwait"
-msgstr "Verlaat"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Korea"
-msgstr "Nog"
+msgid "Guam"
+msgstr "Speletjies"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+msgid "/Options/Test"
+msgstr "/Opsies/Toets"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Comoros"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
+"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
+"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
+"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
+"wagwoord\n"
+"toegang nie."
-#: ../../lang.pm:1
-#, c-format
-msgid "Kiribati"
-msgstr ""
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "Partisie %s word formateer"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cambodia"
-msgstr ""
+msgid "User name"
+msgstr "Gebruikerskode"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr ""
+msgid "New configuration (isdn-light)"
+msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Kenya"
-msgstr "Sleutelbord"
+msgid "Userdrake"
+msgstr "Drukker"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan"
-msgstr ""
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iranies"
+msgid "Backup system"
+msgstr "Stel l阤rstelsels op"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Jamaica"
+msgid "Test pages"
+msgstr "Toetsbladsye"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Iceland"
-msgstr "Yslandies"
+msgid "Checking %s"
+msgstr "LPD word verwyder..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Iranies"
+msgid "TCP/Socket Printer Options"
+msgstr "Sokdrukkeropsies"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Iraq"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Kaartgeheue (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "France"
+msgstr "Frankryk"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "Iranies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking installed software..."
+msgstr "Installeerde sagteware word deursoek..."
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "Israelies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote printer name missing!"
+msgstr "Eksterne drukkernam ontbreek!"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Ireland"
-msgstr "Yslandies"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"Wil u hierdie drukker (\"%s\")\n"
+"die verstek drukker maak?"
#: ../../lang.pm:1
+#, c-format
+msgid "Turkey"
+msgstr ""
+
+#: ../../network/adsl.pm:1
#, fuzzy, c-format
-msgid "Indonesia"
-msgstr "niks"
+msgid "Alcatel speedtouch usb"
+msgstr "speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Hungary"
-msgstr "Hongaars"
+msgid "Number of buttons"
+msgstr "2 knoppies"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Haiti"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vi雝namees \"nommerry\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Croatia"
-msgstr "Kroaties"
+msgid "Module"
+msgstr "Muis"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Honduras"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
+msgid "Hardware"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hong Kong"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "China"
+msgid "United States"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guyana"
-msgstr ""
+msgid "Default OS?"
+msgstr "Verstek bedryfstelsel?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guam"
-msgstr "Speletjies"
+msgid "Swiss (German layout)"
+msgstr "Switsers (Duitse uitleg)"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "Portaal"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure all heads independently"
+msgstr "Konfigureer skyfkoppe afsonderlik"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr ""
+msgid "NTP Server"
+msgstr "NTP-bediener"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Guadeloupe"
+msgid "Load/Save on floppy"
+msgstr "Laai/Stoor op floppie"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "nice"
+msgstr "oulik"
+
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Guinea"
-msgstr "Algemeen"
+msgid "Leaving in %d seconds"
+msgstr "%d sekondes"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Gambia"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Greenland"
-msgstr "Yslandies"
+msgid "Country"
+msgstr "Heg"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Poort"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Gibraltar"
+msgid "Ghostscript"
msgstr ""
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN Configuration"
+msgstr "LAN konfigurasie"
+
#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "Frans"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Georgia"
-msgstr "Norweegs"
+msgid "Advanced Options"
+msgstr "Sluit konfigurasie af"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Grenada"
+msgid "Coma bug"
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "United Kingdom"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Gabon"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "Yslandies"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Micronesia"
-msgstr "Masedonies"
-
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
+msgid "There was an error installing packages:"
+msgstr "Daar was 'n fout met die installasie van die pakkette:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Fiji"
-msgstr "Finnies"
+msgid "Lexmark inkjet configuration"
+msgstr "Internetkonfigurasie"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finland"
-msgstr ""
+msgid "Undo"
+msgstr "Herroep"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Estoniaans"
+msgid "Save partition table"
+msgstr "Skryf partisietabel"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Spain"
-msgstr "Spaans"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Finnish"
+msgstr "Finnies"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "Kundige area"
+msgid "Macedonia"
+msgstr "Masedonies"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Western Sahara"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "Leeg"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Estoniaans"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr "Sloveens"
#: ../../lang.pm:1
#, c-format
-msgid "Ecuador"
+msgid "Libya"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "seriaal"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dominican Republic"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Dominica"
-msgstr "NIS-domein"
+#: ../../any.pm:1
+#, c-format
+msgid "Table"
+msgstr "Tabel"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Denmark"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "Aborteer"
+msgid "Model"
+msgstr "Muis"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cyprus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS-bediener"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Christmas Island"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "Maak boom toe"
+msgid "Modem"
+msgstr "Muis"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cuba"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Colombia"
+msgid "Tuvalu"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Cameroon"
+msgid "Use auto detection"
+msgstr "Gebruik outobespeuring"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
+"GPM verleen muisvermo雗s aan teksgebaseerde Linuxapplikasies soos\n"
+"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
+"konsole toe asook opspringkieskaarte."
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Chile"
-msgstr "Sluit af"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Started on boot"
+msgstr "Gelaai tydens herlaaityd"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Cook Islands"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cote d'Ivoire"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Switzerland"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Central African Republic"
+msgid "East Timor"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
+msgid "Del profile..."
+msgstr "Vee profiel uit..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Canada"
-msgstr "Kanadees (Quebec)"
+msgid "Installing Foomatic..."
+msgstr "Installeer pakket %s"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belize"
-msgstr "Verstel Grootte"
+#: ../../standalone/XFdrake:1
+#, c-format
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Belarus"
-msgstr "Belarussies"
+msgid "detected"
+msgstr "%s bespeur"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Botswana"
-msgstr "Estoniaans"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
+msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bhutan"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Pakketkeuse"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bahamas"
+msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Brazil"
+msgid "SECURITY WARNING!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Kantoor"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bolivia"
-msgstr ""
+msgid "No, I don't want autologin"
+msgstr "Nee, ek verlang outo-aanteken"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Brunei Darussalam"
+msgid "Windows Migration tool"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "Duits"
+msgid "All languages"
+msgstr "Kies u taal"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Benin"
-msgstr "Belgies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Removing %s"
+msgstr "LPD word verwyder..."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Bahrain"
-msgstr ""
+msgid "Testing your connection..."
+msgstr "Konneksie word getoets..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "Hongaars"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Burkina Faso"
-msgstr ""
+msgid "Cache size"
+msgstr "blokgrootte"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Bangladesh"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
+"aanbeveel nie."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Barbados"
-msgstr ""
+msgid "Start sector: "
+msgstr "Kies sektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Albanies"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "seriaal"
+msgid "Seychelles"
+msgstr "Dop"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Geen wagwoord"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Angola"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Netherlands Antilles"
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "Armenies (oud)"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "Albanies"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Romanian (qwerty)"
+msgstr "Romanies (QWERTY)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anguilla"
+msgid "Under Devel ... please wait."
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Antigua and Barbuda"
+msgid "Czech Republic"
msgstr ""
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Egypt"
+msgstr "Leeg"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr ""
+msgid "Old configuration (isdn4net)"
+msgstr "Ou konfigurasie (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Sound card"
+msgstr "Klankkaart"
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Andorra"
-msgstr "Herroep"
+msgid "Import Fonts"
+msgstr "Formateer partisies"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Albanies"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"U het een massiewe FAT partisie. \n"
+"(gewoonlik deur DOS/Windows gebruik)\n"
+"Ek stel voor u verstel eers die grootte van di partisie\n"
+"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../loopback.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkul阹e heg %s\n"
+msgid "Change partition type"
+msgstr "Verander partisietipe"
-#: ../../lvm.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Module opsies:"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"Display theme\n"
+"under console"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
+msgid "Statistics"
+msgstr ""
-#
-#: ../../mouse.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
+msgid "(on %s)"
+msgstr "(op %s)"
-#
#: ../../mouse.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Geen muis"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "none"
-msgstr "niks"
+msgid "average"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 knoppies"
+msgid "New printer name"
+msgstr "Nuwe drukkernaam"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 knoppies"
+msgid "Equatorial Guinea"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 knop"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "busmouse"
-msgstr "busmuis"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Romanian (qwertz)"
+msgstr "Romanies (QWERTZ)"
-#: ../../mouse.pm:1
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "herkonfigureer"
-#: ../../mouse.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
+"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
+"meer komplekse protokolle nodig vir komplekse netwerke."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Kiribati"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Browse"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "CDROM"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Wil u nou aan die internet konnekteer?"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
+msgid "Belgian"
+msgstr "Belgies"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "Beskik u oor nog?"
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "serial"
-msgstr "seriaal"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Geen ethernetkaart is op die stelsel gevind nie.\n"
+"Ek kan nie hierdie konneksietipe opstel nie."
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Windows"
+msgstr "NIS-domein"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "Ek kan nie meer partisies byvoeg nie"
#
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Wiel"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Rekenaarnaam"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Generic"
-msgstr "Generies"
+msgid "/File/Save _As"
+msgstr "/L阤r/Stoor _as"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
+msgid "Delay before booting default image"
+msgstr "Wagperiode voro verstekstelsel gelaai word"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Restrict command line options"
+msgstr "Beperk instruksielynopsies"
-#: ../../mouse.pm:1 ../../security/level.pm:1
-#, c-format
-msgid "Standard"
-msgstr "Standaard"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Europa"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
+msgid "Use free space"
+msgstr "Gebruik beskikbare spasie"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
+msgid "use dhcp"
+msgstr "gebruik dhcp"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
+msgid "Mail alert"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Maak boom oop"
+msgid "Internet configuration"
+msgstr "Internetkonfigurasie"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Info"
-msgstr "Info"
+msgid "Uzbekistan"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "%s bespeur"
-#: ../../my_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "/Autodetect _printers"
+msgstr "Gebruik outobespeuring"
-#: ../../partition_table.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
+msgid "Finish"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunl阤r"
+msgid "Show automatically selected packages"
+msgstr "Wys outogeselekteerde pakkette."
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van l閑r %s het gefaal: %s"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Togo"
msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die prim阹e partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "heg het gefaal"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../pkgs.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "maybe"
-msgstr "moontlik"
+msgid "Please try again"
+msgstr "Probeer asb. weer"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "oulik"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "Is dit korrek?"
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "very nice"
-msgstr "baie oulik"
+msgid "FAT resizing failed: %s"
+msgstr "FAT-grootteverandering het gefaal: %s"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "important"
-msgstr "belangrik"
+msgid "Individual package selection"
+msgstr "Individuele pakketseleksie"
-#: ../../pkgs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "must have"
-msgstr "benodig"
+msgid "This partition is not resizeable"
+msgstr "Hierdie partisie se greootte kan nie verstel word nie"
-#: ../../raid.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
+msgid "Location"
+msgstr "Ligging"
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "Gejoernaliseer"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Portaal"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(op hierdie rekenaar)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sektor"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahrain"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Toestand"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr "laat SCSI-modules weg"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "On boot"
-msgstr "met herlaai"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
+"Omdat u netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
+"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
+"& Netwerkkonneksie te herkonfigureer.\n"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "Sleutelbord uitleg: %s\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "stopped"
-msgstr "onaktief"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "running"
-msgstr "aktief"
+msgid "Maltese (US)"
+msgstr ""
#: ../../services.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Heg en ontheg all netwerkl阤rstels (NFS), SMB (Lan Manger/Windows)\n"
+"en NCP (Netware) hegpunte."
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Datbasis"
+msgid "Tvcard"
+msgstr "TV-kaaer"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
+msgid "Toggle between normal/expert mode"
+msgstr "Skakel oor na normale gebruiksvlak"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "File sharing"
-msgstr ""
+msgid "Size"
+msgstr "Grootte"
-#: ../../services.pm:1
-#, c-format
-msgid "Internet"
-msgstr "Internet"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printing"
-msgstr "Druk"
+msgid "Greenland"
+msgstr "Yslandies"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid logl阤rs. Dit is altyd goed om syslog te loop."
+"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
+"Dis tans aktief.\n"
+"\n"
+"Wat wil u doen?"
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Selekteer lOer"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop. (Amper soos "
-"'finger')."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Watter tipe XFree-konfigurasie verlang u?"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
+msgid "More"
+msgstr "Nog"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
+"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
+"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kli雗te\n"
+"af kan aanvaar."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "Wagwoord"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tajik keyboard"
+msgstr "Tajik sleutelbord"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Stoor en herstel die stelselentropiepoel vir ho kwaliteit,\n"
-"lukraaknommergenerasie."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
+msgid "Font List"
+msgstr "Hegpunt"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te h wat dit nie nodig het nie."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
+msgid "Select file"
+msgstr "Selekteer lOer"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"NFS is 'n popul阹e protokol vir l阤rdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-l阤rsluitfunksionaliteit."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Japan"
msgstr ""
-"NFS is 'n popul阹e protokol vir l阤rdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports l阤r opgestel."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Drukkeropsies"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS bediener"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "NCP-tounaam ontbreek!"
+
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Heg en ontheg all netwerkl阤rstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CDROM getiteld \"%s\""
#: ../../services.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
+"Stoor en herstel die stelselentropiepoel vir ho kwaliteit,\n"
+"lukraaknommergenerasie."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "Turn your computer into a reliable server"
msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
+msgid " (driver %s)"
+msgstr "(drywer %s)"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr "Teruglus l阤r(s): %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
+msgid "I don't know"
+msgstr "Ek weet nie"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Verlaay installasie"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid " ("
msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Serwies (Kirillies)"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-l阤rs uitstuur en CGI's hanteer"
+msgid "Add a module"
+msgstr "Voeg module by"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
+msgid "Profile to delete:"
+msgstr "Profiel om uit te vee..."
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Plaaslike l阤rs"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermo雗s aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
+msgid "busmouse"
+msgstr "busmuis"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
+msgid "Account Login (user name)"
+msgstr "Gebruikerskode"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Fdiv bug"
msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Belgies"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
+msgid "Uruguay"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
+msgid "Path selection"
+msgstr "Stoor pakketseleksie"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"Iets vrots gebeur op u hardeskyf.\n"
+"'n Dataintegriteitstoets het misluk.\n"
+"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
+"eindig."
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Drukkerbedienernaam ontbreek!"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Kies die pakkette wat u wil installeer"
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgid "Bangladesh"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "Beginboodskap"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "Gaan voort"
-#: ../../standalone.pm:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Sleutelbord"
+msgid "Custom Restore"
+msgstr "Aangepaste"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "Skriptipe"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "Fout met die les van l阤r %s"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Formatering"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
+"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
+"spoelprogramme ondersteun nie."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Ander bedryfstelsel (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Installeer/Opgradeer"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pakkette"
#: ../../standalone.pm:1
#, c-format
@@ -6243,3364 +5822,3807 @@ msgid ""
"--version : show version number.\n"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Magtiging"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Verlaay installasie"
+msgid "Costa Rica"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Installeer stelsel"
+msgid "Use libsafe for servers"
+msgstr "Selekteer opsies vir bediener"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfigureer dienste"
+msgid "Icelandic"
+msgstr "Yslandies"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Stel X op"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
+msgid "Please relog into %s to activate the changes"
+msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure networking"
-msgstr "Stel netwerk op"
+#: ../../my_gtk.pm:1
+#, fuzzy, c-format
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
+msgid "Lilo/grub mode"
+msgstr "LILO/GRUB metode"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Root password"
-msgstr "Kies 'root' se wagwoord"
+msgid "Output"
+msgstr "Uitset"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Install system"
-msgstr "Installeer stelsel"
+msgid "Circular mounts %s\n"
+msgstr "Sirkul阹e heg %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
+msgid "Martinique"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format partitions"
-msgstr "Formateer partisies"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Druk"
+msgid "a number"
+msgstr "Telefoonnommer"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
+msgid "Swedish"
+msgstr "Sweeds"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Kies installasieklas"
+msgid "Which %s driver should I try?"
+msgstr "Watter %s drywer meot ek probeer?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
+msgid "Filesystem types:"
+msgstr "LOersteltipes:"
-#: ../../steps.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "License"
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Language"
-msgstr "Kies u taal"
-
-#: ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "utopia 25"
+msgid "Northern Mariana Islands"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "none"
+msgstr "niks"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Gebruikerskode"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "Probeer asb. weer"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "logdrake"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Stoor op floppie"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Kliek asb. op 'n partisie"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "Ghostscript referencing"
msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Herlaaistelsel om te gebruik"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
+msgid "Move"
+msgstr "Skuif"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
+msgid "Bootloader to use"
+msgstr "Herlaaistelsel om te gebruik"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
+msgid "SMB server host"
+msgstr "SMB-bedienernaam"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS-bediener"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "4 billion colors (32 bits)"
+msgstr "4 biljoen kleure (32 bis)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
+msgid "Micronesia"
+msgstr "Masedonies"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
+msgid "License"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
+msgid "This may take a moment to generate the keys."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
+"'n Fout het voorgekom - geen geldige toestelle om die nuwe l阤rstelsels op "
+"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-#: ../../Xconfig/card.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Kies 'n X-bediener"
+msgid "Starting the printing system at boot time"
+msgstr "Watter drukkerstelsel verlang u?"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "X server"
-msgstr "X-bediener"
+msgid "Do you want to start the connection at boot?"
+msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "64 MB or more"
-msgstr "64MB of meer"
+msgid "Processor ID"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Sound trouble shooting"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Polish (qwerty layout)"
+msgstr "Pools (QWERTY uitleg)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "activate now"
+msgstr "Aktiveer nou dadelik"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "This partition can't be used for loopback"
+msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "File already exists. Use it?"
+msgstr "L阤r bestaan alreeds. Moet dit gebruik word?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "received: "
msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../Xconfig/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test"
+msgid "Right Alt key"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Resolution"
-msgstr "Resolusie"
+msgid "the list of alternative drivers for this sound card"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "Gateway"
+msgstr "Portaal"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Videokaart"
+msgid "Scanner sharing"
+msgstr "Druk"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
+msgid "Tonga"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
+msgid "Tunisia"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite di van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
+msgid "Profile: "
+msgstr "Profiel:"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Herroep"
-
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Plug'n Play"
+msgid "XawTV isn't installed!"
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Videokaart: %s"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
+msgid "old static device name used in dev package"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Resolutions"
-msgstr "Resolusies"
+msgid "This label is already used"
+msgstr "Hierdie etiket is alreeds in gebruik"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Konneksietipe:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
+"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
+msgid "Use group id for execution"
+msgstr "Gebruik outobespeuring"
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d sekondes"
+#: ../../any.pm:1
+#, c-format
+msgid "Choose the default user:"
+msgstr "Kies die verstek gebruiker:"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+msgid "Gabon"
msgstr ""
-#: ../../Xconfig/test.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
+"op te stel nie; drukkers wod outomaties bespeur.\n"
+"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "Watter tipe is u ISDN-konneksie?"
+msgid "Domain"
+msgstr "NIS-domein"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"Do you have this feature?"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
+msgid "Provider dns 2 (optional)"
+msgstr "Voorsiener DNS 2 (opsioneel)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X met herlaai"
+msgid "Boot device"
+msgstr "Herlaaitoestel"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Watter partisie se grootte wil u verander?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
+msgid "A tool to monitor your logs"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "Aborteer"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
+msgid "detected on port %s"
+msgstr "Op poort %s bespeur"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "Videokaart: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Kliek asb. op 'n partisie"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Stoor pakketseleksie"
-#: ../../Xconfig/various.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
+msgid "Extended partition not supported on this platform"
+msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-#: ../../Xconfig/various.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
+msgid "ISDN Configuration"
+msgstr "ISDN Konfigurasie"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Hoog"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
+msgid "Internet Connection Sharing"
+msgstr "Internetkonneksiedeling"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
+msgid "Choose file"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Hegpunt:"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
+"dietyd self regstellings moet aanbring."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Server: "
-msgstr "Bediener"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Toets asb. die muis"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Hegpunt"
+msgid "Printer default settings"
+msgstr "Drukkermodelkeuse"
-#: ../../diskdrake/dav.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Server"
-msgstr "Bediener"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generiese PS2 wielmuis"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "Heg"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Drukkerdata word gelees..."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Unmount"
-msgstr "Ontheg"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Selekteer 'n videokaart"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New"
-msgstr "nuut"
+msgid "Remove selected server"
+msgstr "Verwyder tou"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+msgid "French Southern Territories"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Type"
-msgstr "Tipe"
+msgid "the vendor name of the processor"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
+msgid "All data on this partition should be backed-up"
+msgstr "Alle data om hierdie partisie moet gerugsteun word."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Delete"
-msgstr "Uitwis"
+msgid "Installing package %s"
+msgstr "Installeer pakket %s"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Skep"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
+"skep"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "NIS-domein"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Choose packages to install"
+msgstr "Kies pakkette om te installeer"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Plaaslike drukker"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Elke drukker benodig naam (bv. lp).\n"
+"Die Beskrywing- en Liggingvelde is opsioneel.\n"
+"Hulle dien as inligting vir gebruikers."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van di partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Kies aksie"
+msgid "Bhutan"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Wizard"
-msgstr "Assistent"
+msgid "Network interface"
+msgstr "Netwerkkoppelvlak"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
+msgid "Reading printer data..."
+msgstr "Drukkerdata word gelees..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
+msgid "Korean keyboard"
+msgstr "Koreaanse sleutelbord"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
+msgid "Not connected"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr ""
+msgid "Greek"
+msgstr "Grieks"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid "Saint Kitts and Nevis"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info:"
+msgid "Enable OF Boot?"
+msgstr "Laat OF-herlaai toe?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor VertVerfris: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read-only"
+msgid "path"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Device: "
-msgstr "Toestel:"
+msgid "Mount point"
+msgstr "Hegpunt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus l阤rnaam: %s"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
+msgid "Drakbackup"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
+msgid "Colombia"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Verstekpartisie vir herlaai\n"
-" (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Teruglus l阤r(s): %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Plug'n Play"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "Geheg\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Reunion"
+msgstr "Resolusie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
+msgid "Details"
+msgstr "Detail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Formatted\n"
-msgstr "Geformateer\n"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
+msgid "Checking your system..."
+msgstr "Watter drukkerstelsel verlang u?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
+msgid "Print"
+msgstr "Druk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
+msgid "Mongolia"
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Naam: "
+msgid "Mounted\n"
+msgstr "Geheg\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X met herlaai"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Herstel vanaf l阤r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
+msgid "Encryption key for %s"
+msgstr "Die wagwoorde stem nie ooreen nie."
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Copying %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
+"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
+"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "Detected hardware"
+msgstr "Sien hardeware inligting"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mauritius"
+msgstr "Verskeie"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Myanmar (Burmese)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid het gefaal"
+msgid "Enabling swap partition %s"
+msgstr "Partisie %s word formateer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
+"spasie nie) te gebruik nie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
+msgid "Armenian (old)"
+msgstr "Armenies (oud)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "Monitor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "chunk size"
-msgstr "blokgrootte"
+msgid "%s formatting of %s failed"
+msgstr "%s formatering ban %s het gefaal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "level"
-msgstr "vlak"
+msgid "Partitioning failed: %s"
+msgstr "Partisionering het misluk: %s"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "toestel"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Kanadees (Quebec)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Opgradeer"
+
+#: ../../help.pm:1
#, c-format
-msgid "Various"
-msgstr "Verskeie"
+msgid "Workstation"
+msgstr "Werkstasie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Hegopsies:"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installeer nou pakket %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "L阤r bestaan alreeds. Moet dit gebruik word?"
+msgid "Kyrgyzstan"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "L阤r word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
+msgid "With basic documentation"
+msgstr "dokumentasie"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Regte naam"
+#: ../../services.pm:1
+#, c-format
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron is skeduleerder vir periodiese instruksies."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"U moet 'n wortelpartisie definieer.\n"
+"Skep 'n partisie of kliek op 'n bestaande een.\n"
+"Kies dan Hegpunt en stel dit dan '/'."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
+msgid "Proxy should be http://..."
+msgstr "Instaanbediener moet begin met http://"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Teruglus l阤rnaam:"
+msgid "South Africa"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Teruglus"
+msgid "Western Sahara"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM naam?"
+msgid "Modify printer configuration"
+msgstr "Verander drukkerkonfigurasie"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "new"
-msgstr "nuut"
+msgid "Choose a partition"
+msgstr "Kies 'n partisie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving"
-msgstr "Verskuiwing"
+msgid "Please test the mouse"
+msgstr "Toets asb. die muis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Ander"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Korrupte rugsteunl阤r"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move"
-msgstr "Skuif"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Qatar"
+msgstr "Toestand"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
+msgid "LDAP Base dn"
+msgstr "LDAP Basis-dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
+"beskikbaar is nie"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Verstel Grootte"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Skep outoinstallasieskyf"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
+msgid "Dialing mode"
+msgstr "Belmetode"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
+msgid "File sharing"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
+msgid "Clean /tmp at each boot"
+msgstr "Maak /tmp skoon met elke herlaai"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT l阤rstelselgrense word bereken"
+msgid "Malawi"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Waar wil u toestel %s heg?"
+msgid "Please choose your type of mouse."
+msgstr "Wat is u muistoestel?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
+msgid "United Kingdom"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Waar wil u teruglusl阤r %s heg?"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "aktief"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
+msgid "default"
+msgstr "verstek"
-#
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Indonesia"
+msgstr "niks"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Frankryk"
+
+#: ../../any.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Watter l阤rstelsel verlang u?"
+msgid "restrict"
+msgstr "beperk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Verander partisietipe"
+msgid "must have"
+msgstr "benodig"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Teruglusl阤r %s word geformateer"
+msgid "Senegal"
+msgstr "Aktiveer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domeinnaam"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Voorkeure: "
+msgid "access to administrative files"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Kies sektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "Verander RAID"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Montserrat"
+msgstr "Muispoort"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
+msgid "Swap"
+msgstr "Ruilarea"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Konnekteer aan die internet"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Herstel vanaf l阤r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatteer"
+msgid "TV card"
+msgstr "TV-kaaer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Waarskuwing"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Verwyder tou"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
+"van een bediener na 'n ander oordra."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Select file"
-msgstr "Selekteer lOer"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
+msgid "Network Hotplugging"
+msgstr "Netwerkkonfigurasie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
+msgid "Restore From CD"
+msgstr "Herstel vanaf floppie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
+"Nou dat u internetkonfigurasie opgestel is,\n"
+"moet u die rekenaar opstel om dit te deel.\n"
+"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
+"stel.\n"
+"\n"
+"Wil u internetdeling opstel?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle prim阹e partisies is gebruik"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Internetkonneksiedeling is gedeaktiveer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Verwydeer almal"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
+msgid "Latin American"
+msgstr "Latyns-Amerikaans"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Stel netwerk op"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Selekteer lOer"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
+msgid "Info: "
+msgstr "Info:"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Opsies: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
+msgid "Please wait"
+msgstr "Wag asb."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Herroep"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Exit"
-msgstr "Verlaat"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Klaar"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Is dit korrek?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
+msgid "Ethernet Card"
+msgstr "Ethernetkaart"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS bediener"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS-domein"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username"
-msgstr "Gebruikerskode"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Installasie"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Magtiging"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Internet"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "Gebruikerskode"
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Verlaay installasie"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-#: ../../harddrake/data.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "cpu # "
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Verwyder CUPS-bediener"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Muis"
-#: ../../harddrake/data.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USB controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
+"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
+"\n"
+"%s\n"
+"\n"
+"Ek gaan nou u LAN met daardie kaart opstel."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Minimal install"
+msgstr "Minimale installasie"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Estoniaans"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "Totale grootte: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Selekteer 'n videokaart"
+msgid "disabled"
+msgstr "deaktiveer"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Generies"
+msgid "Search for new scanners"
+msgstr "Plaaslike drukker"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Disabling servers..."
+msgstr "Bedieners word gedeaktiveer..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Modem"
-msgstr "Muis"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernetkaart"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Processors"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Webcam"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-#: ../../harddrake/data.pm:1
+#
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Klankkaart"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netwerkdrukker (sok)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Ander"
+msgid "Backup User files..."
+msgstr "Korrupte rugsteunl阤r"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV-kaaer"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Installeer stelsel"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Videomodus"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Eerste DNS-bediener (opsioneel)"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "Tipe"
+msgid "dhcpd Config..."
+msgstr "Konfigurasie in aabou..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "LILO/grub installasie"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CDROM"
-msgstr ""
+msgid "Israeli"
+msgstr "Israelies"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Disk"
-msgstr "Deens"
+msgid "load setting"
+msgstr "Formatering"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Netwerk op pad af"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Stoor op floppie"
+msgid "Truly minimal install"
+msgstr "Minimale installasie"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Denmark"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "Partisie word verskuif..."
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "Drywer"
+msgid "(This) DHCP Server IP"
+msgstr "CUPS-bediener IP:"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "Toets konfigurasie"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Installeer pakket %s"
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Unkown driver"
-msgstr "Onbekende model"
+msgid "Andorra"
+msgstr "Herroep"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
+msgid "Sierra Leone"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Botswana"
+msgstr "Estoniaans"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Verstek)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No known driver"
-msgstr ""
+msgid "Alternative test page (Letter)"
+msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Kies 'n X-bediener"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No open source driver"
+msgid "Swap partition size in MB: "
+msgstr "Ruilpartisiegrootte in MB: "
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Korrupte rugsteunl阤r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
+msgid "Formatted\n"
+msgstr "Geformateer\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "Kies pakket om te installeer"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"- Daemon (%s) include:\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Trouble shooting"
+msgid "%d comma separated numbers"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
+"aangeteken is op ander samewerkende rekenaars."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Outomatiese Stappe Konfigurasie"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+msgid "Barbados"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Konfigurasie"
+msgid "Please select data to backup..."
+msgstr "Kies asb. 'n taal om te gebruik."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "No alternative driver"
+msgid "received"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "enable radio support"
-msgstr ""
+msgid "/File/_New"
+msgstr "/L阤r/_Nuut"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "CUPS-bediener IP:"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Radio support:"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Formatering"
+#: ../../security/level.pm:1
+#, c-format
+msgid "High"
+msgstr "Hoog"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "NoVideo"
+msgstr "Geen video"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Verander tipe"
+msgid "Local Printers"
+msgstr "Plaaslike drukker"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Kaartgeheue (DMA)"
+msgid "Installation image directory"
+msgstr "Xpmac (installasievertoondrywer)"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS-bediener"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Generies"
+msgid "Port: %s"
+msgstr "Poort"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Spain"
+msgstr "Spaans"
+
+#: ../../any.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Hierdie genruikerskode bestaan alreeds"
-#: ../../harddrake/v4l.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "Choose a file"
+msgstr "Kies 'n l阤r"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "Pas toe"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Auto-detect"
+msgid "Auto-detect available ports"
msgstr "Gebruik outobespeuring"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Internetkonneksiedeling is gesper"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "San Marino"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Klaar"
+msgid "Belgium"
+msgstr "Belgies"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kuwait"
+msgstr "Verlaat"
+
+#
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
+msgid "Choose the window manager to run:"
+msgstr "Kies die vensterbestuurder om te loop:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Re-submit"
+msgid "First Time Wizard"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
+"nie. Gaan op u eie risiko voort."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "please wait, parsing file: %s"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Latvies"
+
+#: ../../lang.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Pakistan"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek %s) "
+msgid "Permissions"
+msgstr "Weergawe: %s\n"
-#: ../../interactive/stdio.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "Provider name (ex provider.net)"
+msgstr "Voorsienernaam (bv voorsiener.co.za)"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Version: %s\n"
+msgstr "Weergawe: %s\n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
+"die installering\n"
+"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
+"Daarvoor moet u\n"
+"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
+"instruksielyn intik."
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use the Windows partition for loopback"
+msgstr "Gebruik vir die Windows-partisie vir teruglus"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (typewriter)"
+msgstr "Armenies (tikmasjien)"
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connection type: "
+msgstr "Konneksietipe:"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "Wil u aboot gebruik?"
+msgid "Graphical interface"
+msgstr "X met herlaai"
-#: ../../interactive/stdio.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s met 3D-hardwareversnelling"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opsies: %s"
+msgid "India"
+msgstr "Iranies"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (verstek %s) "
+msgid "Slovakia"
+msgstr "Sloveens"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "Singapore"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Cambodia"
msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Spesifieer opsies"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor HoriSink: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Aftas"
+msgid "Path"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Drukker %s: %s %s\n"
+"Wil u hierdie drukker verander?"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Voeg gebruiker by"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
+"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use quota for backup files."
+msgstr "Korrupte rugsteunl阤r"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Konfigureer drukker"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
+msgid "Internet connection"
+msgstr "Internetkonneksie"
#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"Laai van module %s het gefaal.\n"
+"Wil u ander parameters probeer?"
-#: ../../modules/interactive.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
+msgid "Welcome to the Open Source world."
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "Bosnia and Herzegovina"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Formateer partisies"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr "U benodig 'n ware l阤rstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-#: ../../modules/parameters.pm:1
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Toets asb. die muis"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Netherlands"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Stoor in l阤r"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "Interne ISDN-kaart"
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "Telefoonnommer"
+msgid "Title"
+msgstr "Tabel"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+msgid "WARNING"
msgstr ""
-"Die mees algemene metode vir ADSL is om pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Installing bootloader"
+msgstr "Herlaaistelselinstallasie"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
+msgid "replay"
+msgstr "Herspeel"
-#: ../../network/adsl.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "gebruik dhcp"
+msgid "detected %s"
+msgstr "%s bespeur"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "gebruik pptp"
+msgid "Virgin Islands (U.S.)"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "gebruik pppoe"
+msgid "Bad backup file"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Toets poorte"
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
+"Dis tans gedeaktiveer.\n"
+"\n"
+"Wat wil u doen?"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Pipe into command"
+msgstr "Pyk drukstuk na program"
+
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
+" U kan inligting hieroorvind by %s"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "Detecting devices..."
+msgstr "Toestel word afgetas..."
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Haiti"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Description of the fields:\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+msgid "the name of the CPU"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No network card"
-msgstr "geen netwerkkaart gevind nie"
+msgid "Refreshing printer data..."
+msgstr "Drukkerdata word gelees..."
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "LDAP-bediener"
+#: ../../install2.pm:1
+#, c-format
+msgid "You must also format %s"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Be careful: this operation is dangerous."
+msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
+
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Datbasis"
+msgid "Server: "
+msgstr "Bediener"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Domeinnaam"
+msgid "Security Alerts:"
+msgstr "Sekuriteitsvlak word gestel."
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Bediener"
+msgid "Sweden"
+msgstr "Sien"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Use Expect for SSH"
msgstr ""
-#
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Poland"
+msgstr "Yslandies"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Host name"
-msgstr "Rekenaarnaam"
+msgid "Importance: %s\n"
+msgstr "Belangrikheid: %s\n"
-#
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Rekenaarnaam"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Toets poorte"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Stel netwerk op"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
-#: ../../network/ethernet.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+msgid "SMBus controllers"
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
+msgid "Connection timeout (in sec)"
+msgstr "Konneksie tydlimiet (in sekondes)"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
-#: ../../network/ethernet.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Watter DCHP-kli雗t wil u gebruik?\n"
-"Verstek is dhcp-client"
+msgid "Croatian"
+msgstr "Kroaties"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Gebruik bestaande partisies"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Kon nie vurk nie: %s"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
+msgid "/Help/_About..."
+msgstr "/Help/_Aangaande..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remove user directories before restore."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Wat is u ISDN-kaart?"
+msgid "CUPS printer configuration"
+msgstr "Verander drukkerkonfigurasie"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Abort"
-msgstr "Aborteer"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Continue"
-msgstr "Gaan voort"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/isdn.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
+"Watter DCHP-kli雗t wil u gebruik?\n"
+"Verstek is dhcp-client"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ek weet nie"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domeinnaam"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Stoor op floppie"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "Herstel vanaf l阤r"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
+msgid "Looking for available packages..."
+msgstr "Soek vir beskikbare pakkette"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "Init Message"
+msgstr "Beginboodskap"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Watter protokol verlang u?"
+msgid "Rescue partition table"
+msgstr "Reddingspartisietabel"
-#
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Konneksiespoed"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die w阹eld"
+msgid "Cyprus"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "Remove from RAID"
+msgstr "Verwyder uit RAID"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Protokol vir die res vd w阹eld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
+"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Europese protokol"
+msgid "Configuration Wizards"
+msgstr "Netwerkkonfigurasie-assistent"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
+msgid "ISDN connection"
+msgstr "ISDN konneksie"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "primary"
msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
+"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
+"wat die rol van die diens verduidelik.\n"
+"\n"
+"Wees versigtig met hierdie stap. Indien u beplan om di rekenaar as 'n\n"
+"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
+msgid "Skip"
+msgstr "Mis hierdie stap"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Niue"
+msgstr "Geen video"
+
+#: ../../services.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
+"herlaaityf te begin."
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
+msgid "important"
+msgstr "belangrik"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We recommand the light configuration.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
+"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
+"dit outomaties installeer word.\n"
+"\n"
+"Indien u nie oor 'n SCSI-kaart, beskik nie of oor 'n ISA SCSI-kaart of 'n "
+"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
+"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
+"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
+"\n"
+"\n"
+"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
+"spesifiekeopsies.\n"
+"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
+"gewoonlik die beste.\n"
+"\n"
+"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
+"Windows-bedryfstelsel te bekom.\n"
+"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "CUPS word gelaai"
+msgid "Users"
+msgstr "Gebruikerskode"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Installasie"
+msgid "Aruba"
+msgstr "Grub"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Tabel"
+msgid "Preparing bootloader..."
+msgstr "Herlaaistelsel word voorberei"
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+msgid "Gateway (e.g. %s)"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
+msgid "The passwords do not match"
+msgstr "Die wagwoorde stem nie ooreen nie."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain name"
-msgstr "Domeinnaam"
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_any.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
+"\"linux defcfg=floppy\""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Script-based"
-msgstr "Skriptipe"
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
+msgid "Hardware clock set to GMT"
+msgstr "Hardewareklok gestel vir GMT"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "PAP"
-msgstr "PAP"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "Regte naam"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Login ID"
-msgstr "Aantekenkode"
+msgid "Change Cd-Rom"
+msgstr "Verander CDROM"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefoonnommer"
+msgid "Paraguay"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection name"
-msgstr "Konneksienaam"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opbelopsies"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+msgid "force"
+msgstr "forseer"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
+msgid "Exit"
+msgstr "Verlaat"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
+msgid "Estonian"
+msgstr "Estoniaans"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
+"Apache is 'n WWW-bediener.\n"
+"Dit kan HTML-l阤rs uitstuur en CGI's hanteer"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
+msgid "Add/Del Clients"
+msgstr "DHCP-Kli雗t"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
+msgid "Choose the network interface"
+msgstr "Kies die netwerkkoppelvlak"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown Model"
+msgstr "Onbekende model"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internetkonneksie"
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
+"Verstekpartisie vir herlaai\n"
+" (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Kies 'n l阤r"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
+msgid "Firewalling configuration detected!"
+msgstr "Vuurmuurkonfigurasie gevind!"
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN konneksie"
+msgid "Connection name"
+msgstr "Konneksienaam"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
+msgid "Updating package selection"
+msgstr "Pakketseleksie word opgedateer"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "detected"
-msgstr "%s bespeur"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Waar wil u teruglusl阤r %s heg?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"Die floppie is sukselvol geskep.\n"
+"U kan nou weer 'n installasie uitspeel."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "2 knoppies"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
+msgid "Replay"
+msgstr "Herspeel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normale modemkonneksie"
+msgid "Backup other files"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
+msgid "No floppy drive available"
+msgstr "Geen sagteskyaandrywer beskikbaar nie"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
+msgid "TV norm:"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Kundige bedryfsvlak"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituanies AZERTY (nuut)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"Omdat u netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
+"U het 'n sagteware RAID-partisie as wortel (/).\n"
+"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
+"Onthou om 'n /boot by te voeg."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Previous"
+msgstr "<- Vorige"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "Ander bedryfstelsel (MacOS...)"
+
+#
+#: ../../mouse.pm:1
+#, c-format
+msgid "To activate the mouse,"
+msgstr "Om die muis te aktiveer"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing up the network"
+msgstr "Netwerk op pad op"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+
+#: ../../help.pm:1
#, c-format
msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"Press OK to continue."
-msgstr ""
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
"\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "Stel netwerk op"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Diskonnekteer"
+msgid "Tanzania"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Konnekteer"
+msgid "Computing FAT filesystem bounds"
+msgstr "FAT l阤rstelselgrense word bereken"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Content of the file"
msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
+msgid "Authentication LDAP"
+msgstr "LDAP-magtiging"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+msgid "Let me pick any driver"
msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Instaanbediener moet begin met http://"
+msgid "Profile "
+msgstr "Profiel:"
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
+msgid "transmitted"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Stoor pakketseleksie"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Here is the full list of keyboards available"
+msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+msgid "Theme name"
+msgstr "Drukkernaam:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
+msgid "/_Help"
+msgstr "/_Help"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "DNS server"
-msgstr "DNS bediener"
+msgid "the width of the progress bar"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Cook Islands"
msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "Formatting partition %s"
+msgstr "Partisie %s word formateer"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "Bedienernaam:"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+msgid "Cancel"
+msgstr "Kanselleer"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Gelaai tydens herlaaityd"
+msgid "Searching for configured scanners ..."
+msgstr "Plaaslike drukker"
#
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Toets asb. die muis"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Wiel"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Netwerkkonfigurasie"
+msgid "Videocard"
+msgstr "Videomodus"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Rekenaarnaam"
+msgid "Remove Selected"
+msgstr "Verwyder tou"
-#
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmasker"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Gebruik outobespeuring"
#
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP adres"
+msgid "Remove printer"
+msgstr "Verwyder drukker"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm:1
-#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
+"WAARSKUWING\n"
+"\n"
+"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
+"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
+"installasie\n"
+"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
+"na\n"
+"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
+"OK."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
+"Welkom by die proksiekonfigurasienutsprogram.\n"
+"\n"
+"Hier kan u die HTTP en FTP-instaanbedieners\n"
+"opstel met of sonder aantekenkodes en wagwoorde\n"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
+msgid "Other"
+msgstr "Ander"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Wagwoord"
+msgid "Default"
+msgstr "Verstek"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
+msgid "Button 2 Emulation"
+msgstr "Knop-2 Emulasie"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
+msgid "type1inst building"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Konneksiespoed"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Abiword"
+msgstr "Aborteer"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Kies 'n l阤r"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Belmetode"
+msgid "X server"
+msgstr "X-bediener"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin User Name"
+msgstr "Domeinnaam"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "Daar was 'n fout met die installasie van die pakkette:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Kies u land"
+msgid "US keyboard (international)"
+msgstr "VSA internasionale sleutelbord"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "Verlaay installasie"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
+msgid "LAN connection"
+msgstr "LAN konneksie"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
+msgid "/File/-"
+msgstr "/L阤r/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
+msgid "Italian"
+msgstr "Italiaans"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
+msgid "Basic"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
+msgid "Honduras"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "Kaart I/O"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Hierdie spesiale herlaaipartisie\n"
+"is om u stelsel te duolaai.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
-#
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Russue (Yawerty)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
+msgid "You must enter a device or file name!"
+msgstr "Tik drukkertoestel URI in"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
+msgid "/_Quit"
+msgstr "Verlaat"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
+msgid "Graphics memory: %s kB\n"
+msgstr "Video geheue: %s kB\n"
-#: ../../network/tools.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../partition_table/raw.pm:1
-#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-bediener IP:"
+msgid "access to compilation tools"
+msgstr ""
-#
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Eksterne drukker"
+msgid "Please select data to restore..."
+msgstr "Kies asb. 'n taal om te gebruik."
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
+"van die skyf. (2048 sektors is genoeg)."
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
+msgid "Standard test page"
+msgstr "Standaard toetsbladsy"
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
+msgid "Create"
+msgstr "Skep"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "What"
+msgstr "Wag"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "There was an error ordering packages:"
+msgstr "Daar was 'n fout met pakkette:"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (BDS)"
+msgstr "Bulgaars"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD"
-msgstr "LPD"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "Datbasis"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "LOerstelseltipe: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "Werkgroep:"
+
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
+msgid "Brazil"
+msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Unknown Model"
-msgstr "Onbekende model"
+msgid "Auto Install"
+msgstr "Installasie"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Onbekende model"
+msgid "Network Configuration Wizard"
+msgstr "Netwerkkonfigurasie-assistent"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Poort"
+msgid "Removable media automounting"
+msgstr "Verwyderbare media"
-#
-#: ../../printer/main.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Rekenaarnaam"
+msgid "Printing"
+msgstr "Druk"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Netwerkkoppelvlak"
+msgid "Unkown driver"
+msgstr "Onbekende model"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create a new partition"
+msgstr "Kies 'n nuwe grootte"
+
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Koppelvlak %s"
+msgid "Driver:"
+msgstr "Drywer"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "geen netwerkkaart gevind nie"
+msgid "unknown"
+msgstr "Onbekende model"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "Use fdisk"
+msgstr "Gebruik fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "BEWEEG DIE WIEL!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid "sent: "
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
+msgid "Automatic IP"
+msgstr "Outomatiese IP"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fout in die skryf van %s"
+msgid "Configuration of a remote printer"
+msgstr "Konfigureer drukker"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", multi-function device"
+msgid "Moldova"
msgstr ""
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid ", multi-function device on USB"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Instaanbediener moet begin met http://"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Geen drukker"
+msgid "Add a new rule at the end"
+msgstr "Voeg drukker by"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
+"U kan noue die opsies voorsien vir module %s.\n"
+"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
+"Bv. ``io=0x300 irq-7''"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
+msgid "Quit without writing the partition table?"
+msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Tik drukkertoestel URI in"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "Installing packages..."
+msgstr "Installeer pakket %s"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Dutch"
+msgstr "Nederlands"
#
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (sok)"
+msgid "The following packages need to be installed:\n"
+msgstr "Die volgende pakkette gaan installeer word"
-#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
+msgid "Angola"
+msgstr ""
-#
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "service setting"
+msgstr "interessant"
#
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Konfigureer drukker"
+msgid "Custom"
+msgstr "Aangepaste"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Drukker"
+msgid "File is already used by another loopback, choose another one"
+msgstr "L阤r word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Drukkerdata word gelees..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read-only"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
+msgid "Latvia"
+msgstr "Latvies"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Wil u die konfigurasie toets?"
+msgid "No known driver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Configure Local Area Network..."
+msgstr "Stel plaaslike netwerk op..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "Laai die klankstelsel op u rekenaar"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#, fuzzy, c-format
+msgid "Preparing printer database..."
+msgstr "Drukkerdata word gelees..."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Vertoon inligting"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "No network card"
+msgstr "geen netwerkkaart gevind nie"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "Watter l阤rstelsel verlang u?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
+msgid "3 buttons"
+msgstr "3 knoppies"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Verstek drukker"
+msgid "Detailed information"
+msgstr "Gedetaileerde inligting"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
+msgid "Malta"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Drukkeropsies"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
+msgid "This floppy is not FAT formatted"
+msgstr "Hierdie floppie is nie in FAT-formaat nie"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
+msgid "Configuring network"
+msgstr "Stel netwerk op"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Drukkerdata word gelees..."
+msgid "Graphic Card"
+msgstr "Videokaart"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
+msgid "Resizing Windows partition"
+msgstr "Windowsl阤rstelselgrense word bereken"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
+msgid "Provider dns 1 (optional)"
+msgstr "Voorsiener DNS 1 (opsioneel)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Geen drukker"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Gaan voort!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"U het nou partisie %s partisioneer.\n"
+"Wanneer u klaar is, stoor u veranderinge met 'w'."
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9609,419 +9631,342 @@ msgstr "Gaan voort!"
msgid "Close"
msgstr "Sluit af"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
+msgid "Calendar"
+msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normale modus"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Stel netwerk op"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
+"van die drukkkerbediener en die naam van die drukkertou\n"
+"voorsien word."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Konfigurasie"
+msgid "Iceland"
+msgstr "Yslandies"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
+msgid "stopped"
+msgstr "onaktief"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Installeer pakket %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigureer drukker"
+msgid "Expand Tree"
+msgstr "Maak boom oop"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Drukkerdata word gelees..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
+msgid "Expert Mode"
+msgstr "Kundige bedryfsvlak"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Verstek drukker"
+msgid "Printer options"
+msgstr "Drukkeropsies"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Installeer pakket %s"
+msgid "Local Network adress"
+msgstr "geen netwerkkaart gevind nie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "LPD word verwyder..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
+msgid "Samba Server"
+msgstr "NIS-bediener"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Parano飁s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "Hoog"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> tussen elemente | <Space> selekteer | <F12> volgende skerm "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
+msgid "Zimbabwe"
+msgstr "moontlik"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "Toets asb. die muis"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
+msgid "When"
+msgstr "Wiel"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Konneksie word begin..."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Tweede DNS-bediener (opsioneel)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Drukkerdata word gelees..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
+msgid "Color depth: %s\n"
+msgstr "Kleurdiepte: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "%s word oorgedra..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
+msgid "Loading from floppy"
+msgstr "Oplaai vanaf floppie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transfer"
-msgstr "Oordrag"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "Sloveens"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
+"Tik 'n gebruiker in\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Drukkermodelkeuse"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Hier is die huidige inskrywings\n"
+"U kan byvoeg or verwyder soos nodig."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
+"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "Installeer pakket %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "herlaaiskyfskepping"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
+msgid "LDAP"
+msgstr "KDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Change type"
+msgstr "Verander tipe"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO installasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Geluk, installasie is afgehandel.\n"
+"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
+"\n"
+"\n"
+"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
+"bekyk die errata beskikbaar op\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
+"hoofstuk in die Offisi雔e Liux-Mandrake Gebruikersgids."
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "Parano飁s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10032,241 +9977,213 @@ msgid ""
"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Resolusie"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
+"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
+"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
+"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "reconfigure"
+msgstr "herkonfigureer"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
+"bied,\n"
+"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "Drukkerbediener"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
+"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
+"word die eerste partisie vernietig?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "Verwyder tou"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Print"
-msgstr "Druk"
+msgid "Please fill or check the field below"
+msgstr "Vul asb. die velde hieronder in"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Wil u die /etc/fstab veranderinge stoor?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
+msgid "Boot Protocol"
+msgstr "Herlaaiprotokol"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Toetsbladsye"
+msgid "LVM-disks %s\n"
+msgstr "LVM-skywe %s\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "The package %s is needed. Install it?"
msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
+msgid "On boot"
+msgstr "met herlaai"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Bus identification"
+msgstr "Magtiging"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
+msgid "Please make a backup of your data first"
+msgstr "Rugsteun u data eers asb."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
+msgid "Vatican"
+msgstr "Latvies"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
+msgid "Eritrea"
+msgstr "Kundige area"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
+#
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Verwyder drukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+msgid "Morocco"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10275,1456 +10192,1270 @@ msgid "Which printer model do you have?"
msgstr "Oor watter tipe drukker beskik u?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Drukkerdata word gelees..."
+msgid "Add a new printer"
+msgstr "Voeg drukker by"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Eksterne drukkernaam"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Is dit korrek?"
+msgid "<-- Delete"
+msgstr "Uitwis"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "Nepal"
msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Drukkerdata word gelees..."
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Location"
-msgstr "Ligging"
+msgid "chunk size"
+msgstr "blokgrootte"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Description"
-msgstr "Beskrywing"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Name of printer"
-msgstr "Drukkernaam"
+msgid "Problems installing package %s"
+msgstr "Probleme met Installasue van pakket %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-"Elke drukker benodig naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Reload partition table"
+msgstr "Reddingspartisietabel"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Installeer pakket %s"
+msgid "Boot"
+msgstr "Basis"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installeer pakket %s"
+msgid "Tuner type:"
+msgstr "Verander tipe"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domeinnaam"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Pyk drukstuk na program"
+msgid "Security Administrator:"
+msgstr "Eksterne lpd drukkeropsies"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "%s bespeur"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
+msgid "Please enter your login"
+msgstr "Probeer asb. weer"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Poort"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Drukkerbedienernaam"
+msgid "Fonts copy"
+msgstr "Formatteer floppie"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet heeltal wees."
+msgid "Automated"
+msgstr "Outomaties"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Wil u die konfigurasie toets?"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save packages selection"
+msgstr "Stoor pakketseleksie"
+
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Sokdrukkeropsies"
+msgid "Remove the last item"
+msgstr "Teruglusl阤r %s word geformateer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Konneksie word begin..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
+msgid "use pptp"
+msgstr "gebruik pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Drukkerbediener"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Wil u die konfigurasie toets?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
+msgid "Configure the network now"
+msgstr "Stel netwerk op"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Kies 'n spie雔 waar die pakkette verkry kan word"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
+"Fout: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Which sector do you want to move it to?"
+msgstr "Na watter sektor wil u skuif?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Do you want to click on this button?"
+msgstr "Wil u aboot gebruik?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SECURITY WARNING!"
+msgid "Bahamas"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "觙 die bedienernaam 骹 die bediener-IP moet verskaf word!"
-
-#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Gebruik outobespeuring"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Werkgroep:"
+msgid "Manual configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Share name"
-msgstr "Drukkernaam:"
+msgid "search"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
+"keyboard\n"
+"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
+"dit\n"
+"op meeste rekenaars ongesper laat."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installasievertoondrywer)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
+"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
+"te log na 'n verskeidenheid logl阤rs. Dit is altyd goed om syslog te loop."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Netwerk op pad af"
+msgid "Unknown/Others"
+msgstr "Generies"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
+msgid "Options"
+msgstr "Opsies"
-#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Drukker \"%s\" is nou die verstekdrukker"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Kleurkonfigurasie"
+msgid "Auto-detected"
+msgstr "Gebruik outobespeuring"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Tik drukkertoestel URI in"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"Nou dat u internetkonfigurasie opgestel is,\n"
+"moet u die rekenaar opstel om dit te deel.\n"
+"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
+"stel.\n"
+"\n"
+"Wil u internetdeling opstel?\n"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
+"sal herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
+"herlaai."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Refuse"
+msgstr "Weier"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
#
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Dei volgende pakkette gaan verwyder word"
+msgid "Remote Printers"
+msgstr "Eksterne drukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "L阤r %s word geskep en formatteer"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Plaaslike drukker"
+msgid "Choose an existing LVM to add to"
+msgstr "Kies 'n bestaande LVM om by toe te voeg"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Tik drukkertoestel URI in"
+msgid "xfs restart"
+msgstr "beperk"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Plaaslike drukker"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "geen beskikbare partisies"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Geen drukker"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Drukkerbedienernaam"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Domain Name Resolver"
+msgstr "Domeinnaam"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netwerkdrukker (sok)"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key (again)"
+msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
+#, c-format
+msgid "Samba share name missing!"
+msgstr "SAMBA-deelnaam ontbreek!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "True Type install done"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Detection in progress"
+msgstr "Op poort %s bespeur"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Welkom by %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Bootsplash"
msgstr ""
-#
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Eksterne drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Druk"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
+"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
+"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
+"ophang, maar dit sal nie skade veroorsaak nie."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid ")"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
-msgstr ""
+"Click on Configure to launch the setup wizard."
+msgstr "Internetkonneksiedeling"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
+msgid "Cuba"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Plaaslike drukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Verstel Grootte"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Tydsbeperking vir stelselkernlaai"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
+"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Hongaars"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"Kies u internetdiensvoorsiener.\n"
+"Indien nie in die lys nie kies Ongelys"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Outotydsinkronisasie met NTP"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
+msgid "LDAP Server"
+msgstr "LDAP-bediener"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
+"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
+"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
+"veilig om op rekenaars te h wat dit nie nodig het nie."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "Kies u land"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Voeg drukker by"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Voeg drukker by"
+msgid "Standalone Tools"
+msgstr "Konsole hulpprogramme"
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Laai dit"
+msgid "Where"
+msgstr "Wiel"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "but not matching"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Is dit korrek?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "NCP-bedienernaam ontbreek!"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Stel PCMCIA op..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu is weg"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Eksterne CUPS-drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Verwyder tou"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s bespeur"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Voeg gebruiker by"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Maak hierdie die verstekdrukker"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "partisie %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Parano飁s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Plaaslike drukker"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Verwyder tou"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Wis hele skyf"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Verstek)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Outomatiese CUPS konfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Stel netwerk op"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Klaar"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "CUPS-bediener IP:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(op hierdie rekenaar)"
+msgid "permissions"
+msgstr "partisie %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Kleurkonfigurasie"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Vorige"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Druk"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Internetkonneksiedelingkonfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Skakel tussen plat- en groepsortering"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "Themes"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opsies: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"U gebruik huidig %s as herlaaibestuurder.\n"
+"Kliek op Konfigureer om opstelassistent te laai."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "Verander drukkerkonfigurasie"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Bepaalde stappe is nie afgehandel nie.\n"
"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
+"Wil u werklik nou aborteer?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
+msgid "Polish (qwertz layout)"
+msgstr "Pools (QWERTZ uitleg)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
msgstr ""
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the user umask."
msgstr ""
+"Welkom by %s die bedryfstelselkeuseprogram!\n"
+"\n"
+"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
+"%d sekonde vir die verstekopsie.\n"
+"\n"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugees"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Teruglus l阤rnaam:"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "seriaal"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Hierdie l阤rgids moet altyd in die wortell阤rstelsel bly"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Installeer herlaaistelsel"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Kies die geheue grootte van u videokaart"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM naam?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Het %s %s koppelvlakke gevind"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Installasie"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Nuwe drukkernaam"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kaart IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "logdrake"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO met tekskieskaart"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Klaar"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Spie雔 word gekontak vir die lys van pakkette"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituanies AZERTY (oud)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiliaans (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO installasie"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/L阤r/_Oopmaak"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Outoinstallasieskyf word geskep."
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "Hongaars"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Toetsbladsye"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Kleurkonfigurasie"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Wat is u muistoestel?"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "Oorskakeling van ext2 na ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Voeg drukker by"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "GB"
+msgstr "GB"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Gee asb. 'n gebruikerskode"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "Laat CD-herlaai toe?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Normale modemkonneksie"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11732,743 +11463,543 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
+msgid "%s on %s"
+msgstr "Poort"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Gebruik sekuriteitsvlak"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opsies"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Wat is u tydsone?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
+msgid "Guinea"
+msgstr "Algemeen"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kli雗te\n"
-"af kan aanvaar."
+msgid "The system is now connected to the Internet."
+msgstr "Die stelsel is nou aan die internet gekonnekteer."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kli雗t konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Parano飁s"
+msgid "Icon"
+msgstr "Ikoon"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "Hoog"
+msgid "Please choose what you want to backup"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "Hoog"
+msgid "256 colors (8 bits)"
+msgstr "256 kleure (8 bis)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Swak"
+msgid "Read-write"
+msgstr "Lees-skryf"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
+msgid "Size: %s\n"
+msgstr "Grootte: %s\n"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
+msgid "Hostname: "
+msgstr "Bedienernaam:"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
+msgid "Chunk size %s\n"
+msgstr "Blokgrootte %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL konneksie"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Error!"
+msgstr "Fout!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Sluit konfigurasie af"
+msgid "cable connection detected"
+msgstr "Kabelkonneksie bespeur"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range End:"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP Range Start:"
+msgid "/_Report Bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS-bediener"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "Verstel Grootte"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domeinnaam"
+msgid "Dominica"
+msgstr "NIS-domein"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Resolusie: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Routers:"
+msgid "matching"
msgstr ""
-#
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmasker"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
+"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
+"ttyS0 onder GNU/Linux is."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP-Kli雗t"
+#
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Dei volgende pakkette gaan verwyder word"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP-Kli雗t"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Konnekteer aan die internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Gebruik bestaande partisies"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP-Kli雗t"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Kanadees (Quebec)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP-Kli雗t"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Muistoestel: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No net boot images created!"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tipe:"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Voeg gebruiker by"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Selekteer lOer"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Uitwis"
+msgid "MandrakeExpert Corporate"
+msgstr "Kundige"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Gebruik outobespeuring"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "You've not selected any font"
+msgstr "Verwyder tou"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "Kies u taal"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Printer model selection"
+msgstr "Drukkermodelkeuse"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
+"partisietipe"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d sekondes"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Sit 'n le floppie in aandrywer %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "A valid URI must be entered!"
+msgstr "'n Geldige URI moet verskaf word!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP-Kli雗t"
+msgid "Sound configuration"
+msgstr "Konfigurasie"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Voeg gebruiker by"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "Fototoetsbladsy"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Gespesialiseerde skyfpartisionering"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS-bediener"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS-bediener"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Datbasis"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Datbasis"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Teruglusl阤r %s word geformateer"
+msgid "type: %s"
+msgstr "Tipe:"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Voeg 'n gebruiker by"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaaks (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
+msgid "No Sound Card detected!"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Congratulations!"
-msgstr "Geluk!"
+msgid "Mouse Port"
+msgstr "Muispoort"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
+msgid "Ftp Server"
+msgstr "NIS-bediener"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
-msgid "manual"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "Herspeel"
+msgid "Uganda"
+msgstr "Opgradeer"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
"\n"
-"Do you want to continue?"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
+msgid "Comoros"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
-msgstr ""
+"Ons gan nou die %s konneksie konfigureer.\n"
+"\n"
+"\n"
+"Drk OK om voort te gaan."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot metode"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generiese 3-knop muis"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Wat is u muistoestel?"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Drukkernaam:"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12480,4603 +12011,5110 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "Herstel vanaf l阤r"
+msgid "Network & Internet"
+msgstr "Netwerkkoppelvlak"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Stel l阤rstelsels op"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituanies \"foneties\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Sluit konfigurasie af"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Konfigurasie"
+msgid "Sharing of local scanners"
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Netwerkkonfigurasie"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Netwerkkonfigurasie"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Netwerkkonfigurasie"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name missing!"
+msgstr "Eksterne bedienernaam ontbreek!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Stoor in l阤r"
+msgid "Network"
+msgstr "Netwerkkoppelvlak"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Korrupte rugsteunl阤r"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Die wagwoorde is te eenvoudig"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaaks (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Korrupte rugsteunl阤r"
+msgid ""
+" Transfer \n"
+"Now"
+msgstr "Oordrag"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Korrupte rugsteunl阤r"
+msgid "Use daemon"
+msgstr "Gebruikerskode"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "Magtiging"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "CUPS-bediener IP:"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Where do you want to mount %s?"
+msgstr "Waar wil u toestel %s heg?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Restore Via Network"
+msgstr "Herstel vanaf l阤r"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Algeria"
+msgstr "seriaal"
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die volgende pakkette gaan installeer word"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-grootte"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Teks"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- Vorige"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Toestand"
+msgid "Setting Default Printer..."
+msgstr "Verstek drukker"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Korrupte rugsteunl阤r"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Koppelvlak %s (met module %s)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Herstel vanaf l阤r"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Naam: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Reddingspartisietabel"
+msgid "Generating preview ..."
+msgstr "Toestel word afgetas..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "seriaal"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Aangepaste"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgies (Latynse uitleg)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Herstel vanaf l阤r"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Bedienernaam:"
+msgid "Kenya"
+msgstr "Sleutelbord"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Gebruik ``Ontheg'' eerste"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "Gebruikerskode"
+msgid "Installing mtools packages..."
+msgstr "Installeer pakket %s"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Wagwoord"
+msgid "You must specify a root partition"
+msgstr "U moet oor 'n ruilpartisie beskik"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "herlaaiskyfskepping"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Rekenaarnaam"
+msgid "Select a scanner model"
+msgstr "Selekteer 'n videokaart"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - Nuwe generasie LPR"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Herstel vanaf l阤r"
+msgid "Drakbackup Configuration"
+msgstr "Netwerkkonfigurasie"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid "Save as.."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Reddingspartisietabel"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Outointeken"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Herstel vanaf floppie"
+msgid "System configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Herstel vanaf l阤r"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Verwyder tou"
+msgid "Configuring printer ..."
+msgstr "Konfigureer drukker"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Wat is u muistoestel?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Herstel vanaf l阤r"
+msgid "Bermuda"
+msgstr "Duits"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Herstel vanaf l阤r"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Installeer stelsel"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Ander"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Wat is u muistoestel?"
+msgid "Remove"
+msgstr "Verwyder drukker"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "Lesotho"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf floppie"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Korrupte rugsteunl阤r"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr "Pyk drukstuk na program"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Toets asb. die muis"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "Ja"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Korrupte rugsteunl阤r"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Watter protokol verlang u?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Wat is u muistoestel?"
+msgid "Restore Progress"
+msgstr "Herstel vanaf l阤r"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Korrupte rugsteunl阤r"
+msgid "Estonia"
+msgstr "Estoniaans"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
+"Die enigste oplossing is om die prim阹e partisie te skuif sodat die gat\n"
+"langs die ekstensie partisies is"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Channel"
+msgstr "Kanselleer"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "Add"
+msgstr "Voeg by"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+msgid " Error while sending mail. \n"
+msgstr "Fout met die les van l阤r %s"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Sleutelbord"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Kies die konneksie wat u wil konfigureer"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Konfigureer netwerktoestel %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Aktiveer nou dadelik"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Soek vir pakkette om op te gradeer."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Hegpunt:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\t-CDROM.\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "With X"
+msgstr "Wag"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Multikopkonfigurasie"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Daemon (%s) include:\n"
+"%s"
msgstr ""
+"Behou die veranderinge?\n"
+"Huidige konfigurasie is:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
+"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop. (Amper soos "
+"'finger')."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Domeinnaam"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opsies"
+msgid "Sharing of local printers"
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Plaaslike drukker"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Leeg"
+
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save via %s on host: %s\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\t\tErase=%s"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Waar wil u toestel %s heg?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " (multi-session)"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Muistoestel: %s\n"
+msgid "Interface \"%s\""
+msgstr "Koppelvlak %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "RW"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "1 button"
+msgstr "1 knop"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Delete hard drive tar files after backup.\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- Other Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Nog"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "U keuse? (verstek %s) "
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Geen drukker"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Herroep"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
+msgid "Interface %s"
+msgstr "Koppelvlak %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Stel muistoestel op"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Kies die hegpunte"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Backup Users"
+msgid "OK"
+msgstr "OK"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslaavs (latynse uitleg)"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Besig met installasie"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Stel l阤rstelsels op"
+msgid "Is this an install or an upgrade?"
+msgstr "Is hierdie 'n installasie of opgradering?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "ISDN card"
+msgstr "Interne ISDN-kaart"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "on Tape Device"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "on CDROM"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
+"\n"
+"Die kongiurasie gaan op u stelsel toegepas word.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "across Network"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "on Hard Drive"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
+#
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Eksterne CUPS-drukker"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "When"
-msgstr "Wiel"
+msgid "delete"
+msgstr "Uitwis"
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Where"
-msgstr "Wiel"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "Wag"
+msgid "DHCP host name"
+msgstr "Rekenaarnaam"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+msgid "Did it work properly?"
+msgstr "Het dit reg gewerk?"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Poor"
+msgstr "Swak"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Kies asb. 'n taal om te gebruik."
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Kies die pakkette wat u wil installeer"
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Onveilig"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Gebruikerskode"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektore"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "monthly"
-msgstr ""
+msgid "No"
+msgstr "Nee"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "weekly"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "daily"
+msgid "Guadeloupe"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "hourly"
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "HardDrive / NFS"
+msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""
+"Wil u h dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
+"terugstuur)?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr ""
+msgid "Vertical refresh rate"
+msgstr "Vertikale verfristempo"
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Toets asb. die muis"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Gaan stap '%s' binne\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Kies die pakkette wat u wil installeer"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Removing %s ..."
+msgstr "LPD word verwyder..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Niger"
+msgstr "Hoog"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "No printer"
+msgstr "Geen drukker"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Korrupte rugsteunl阤r"
+msgid "alert configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Selekteer lOer"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "NetWare drukkeropsies"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Erase Now "
-msgstr "Oordrag"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "General"
+msgstr "Algemeen"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr "Drukkerstelsel:"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Voeg 'n gebruiker by"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Wat is u sleutelborduitleg?"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "Netwerkkonfigurasie (%d toestelle)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Geen wagwoord"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Drukkertounaam"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Probeer asb. weer"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Wil u aboot gebruik?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Probeer asb. weer"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarussies"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Toets asb. die muis"
+msgid "Move files to the new partition"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr "Oordrag"
+msgid "Restore From Catalog"
+msgstr "Reddingspartisietabel"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "Druk"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Werkgroep:"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Korrupte rugsteunl阤r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Gebruikerskode"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO met grafiese kieskaart"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Verwyder Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Skatting"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge飊stalleer"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Verwyder tou"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Gaan steeds voort?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Soek vir beskikbare pakkette"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Spesifieer opsies"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Vanuatu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Korrupte rugsteunl阤r"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Either the server name or the server's IP must be given!"
+msgstr "觙 die bedienernaam 骹 die bediener-IP moet verskaf word!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
+"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
+"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
+"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
+"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
+"ernstige stelselfalings te herstel.\n"
+"\n"
+"Indien u 'n herlaaiskyf wil maak,\n"
+"plaas 'n skyf in die aandrywer en druk \"OK\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Pakketkeuse"
+msgid "Theme installation failed!"
+msgstr "Kies installasieklas"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Fout met die les van l阤r %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Gebruik vir teruglus"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "gebruik pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "Gevorderd"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "Transfer"
+msgstr "Oordrag"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Korrupte rugsteunl阤r"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (VSA)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Korrupte rugsteunl阤r"
+msgid "More Options"
+msgstr "Module opsies:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Korrupte rugsteunl阤r"
+msgid "Afghanistan"
+msgstr "Albanies"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Korrupte rugsteunl阤r"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
+"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
+"funksionaliteit\n"
+"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
+"konfigurasie."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "Lees noukeurig!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Poort"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Toetsbladsye"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Kan nie %s oopmaak nie: %s\n"
+msgid "The encryption keys do not match"
+msgstr "Die wagwoorde stem nie ooreen nie."
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Geen wagwoord"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "This may take a moment to generate the keys."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
+"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
+"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
+"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
+"installasie stop sit. Om met die installasie voort te gaan kliek op die "
+"Aanvaar\n"
+"knoppie."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
+msgid "Resolutions"
+msgstr "Resolusies"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Verwyder tou"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Netwerkkonfigurasie"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS word gelaai"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Kliek asb. op 'n partisie"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Uitwis"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
+"Wil u X begin met 'n herlaai?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
+msgid "Build the disk"
+msgstr "Bou die skyf"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Diskonnekteer"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Laai X-Windowstelsel met herlaai"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "Stelselmode"
+msgid "HTTP proxy"
+msgstr "HTTP instaanbediener"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS-bediener"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Europese protokol"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "Fout"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
+msgid "allow \"su\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Stoor pakketseleksie"
+msgid "Australia"
+msgstr "seriaal"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigureer net die \"%s\" kaart (%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Kies installasieklas"
+msgid "Level"
+msgstr "vlak"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "Geen video"
+msgid "Change the printing system"
+msgstr "Stel netwerk op"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"U stelsel onderstuen multikopkonfigurasie.\n"
+"Wat wil u doen?"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid "Configure services"
+msgstr "Konfigureer dienste"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
+#, c-format
+msgid "mount failed: "
+msgstr "heg het gefaal"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Image"
+msgstr "Beeld"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Eksterne lpd drukkeropsies"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
+msgid "Selected All"
+msgstr "Selekteer lOer"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Webmin Service"
+msgstr "Dienste"
+
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "device"
+msgstr "toestel"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "All"
+msgstr "Alles"
-#: ../../standalone/drakboot:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Kies 'n nuwe grootte"
+msgid "Greece"
+msgstr "Grieks"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "'n Fout het voorgekom"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Installeer stelsel"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armenies (tikmasjien)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot metode"
+msgid "Printer manufacturer, model, driver"
+msgstr "Drukkervervaardiger, model, drywer"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Daar is geen medium for toestel %s nie.\n"
+"Sit asb. een in."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/L阤r/_Verlaat"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_L阤r"
+msgid "Printer on NetWare server"
+msgstr "Eksterne Netware-drukker"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+msgid "Give the ram size in MB"
+msgstr "Gee die geheuegrootte in MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Real name"
+msgstr "Regte naam"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Verlaay installasie"
+msgid "done"
+msgstr "Klaar"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Verlaay installasie"
+msgid "Please uncheck or remove it on next time."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konsole hulpprogramme"
+msgid "Higher"
+msgstr "Hoog"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "Poort"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Kies die partisies om te formatteer"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Wag asb."
+msgid "Can't find %s on %s"
+msgstr "Kan nie %s oopmaak nie: %s\n"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Pakketkeuse"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Magtiging"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Netwerkkonfigurasie-assistent"
+msgid "Japanese 106 keys"
+msgstr "Japanees 106 sleutels"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Drukker"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Migration tool"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Urpmi"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Drukkernaam:"
+msgid "Delete selected rule"
+msgstr "Verwyder tou"
#
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Eksterne drukker"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Eksterne CUPS-drukker"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Muis"
+msgid "Insert a floppy in %s"
+msgstr "Sit 'n skyf in aandrywer %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "verpligtend"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Beheersentrum"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "kompak"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "1 minute"
+msgstr "1 minuut"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "op bus %d id %d\n"
+
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "First Time Wizard"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Beheersentrum"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
+"spasie nie) te gebruik nie"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parameters"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Vuurmuur/Netwerkroteerder"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Kli雗t"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
+msgid "Printer Server"
+msgstr "Drukkerbediener"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Portaal"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Konneksietipe:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Kleurkonfigurasie"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Profiel:"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
+msgid "Saint Pierre and Miquelon"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Portugal"
+msgstr "Poort"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktiveer nou dadelik"
+msgid "Do you have another one?"
+msgstr "Beskik u oor nog?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP-kli雗t"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", printing to %s"
+msgstr "Fout in die skryf van %s"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
+#
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Toets asb. die muis"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
+msgid "Toggle to normal mode"
+msgstr "Skakel oor na normale gebruiksvlak"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
+msgid "Generic"
+msgstr "Generies"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Silinder %d na silinder %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
+msgid "New profile..."
+msgstr "Nuwe profiel..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
+msgid "Which disk do you want to move it to?"
+msgstr "Na watter skyf wil u skuif?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Konnekteer..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "NIS-domein"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Koppelvlak %s (met module %s)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Gekonnekteer"
+msgid "Wallis and Futuna"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Interface:"
-msgstr "Koppelvlak:"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gateway:"
-msgstr "Portaal:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Apply"
-msgstr "Pas toe"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Assistent..."
+msgid "Is this correct?"
+msgstr "Is dit korrek?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Marshall Islands"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Type:"
-msgstr "Tipe:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "Verwyder Windows(TM)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internettoegang"
+msgid "Root password"
+msgstr "Kies 'root' se wagwoord"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hostname: "
-msgstr "Bedienernaam:"
+msgid "Build All Kernels -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "State"
-msgstr "Toestand"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"U het nie 'n ruilpartisie nie\n"
+"\n"
+"Wil u steeds voortgaan?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Driver"
-msgstr "Drywer"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "NCP-bedienernaam ontbreek!"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "Drukkernaam:"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "Koppelvlak"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Laat CD-herlaai toe?"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
+msgid "Graphical Environment"
+msgstr "Grafiese omgewing"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wait please"
+msgid "Gibraltar"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "on Tape Device"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "Nuwe profiel..."
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "CUPS word gelaai"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP-Kli雗t"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
+msgid "Filesystem type: "
+msgstr "LOerstelseltipe: "
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Konneksie word begin..."
-#: ../../standalone/drakedm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Vietnam"
msgstr ""
-#: ../../standalone/drakedm:1
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Beskrywing"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-"Kon nie mkbootdisk ordentelik afsluit nie:\n"
-" %s \n"
-" %s"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kon nie vurk nie: %s"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+msgid "Help"
msgstr ""
-"Daar is geen medium for toestel %s nie.\n"
-"Sit asb. een in."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Build the disk"
-msgstr "Bou die skyf"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Output"
-msgstr "Uitset"
+msgid "Your personal phone number"
+msgstr "U persoonlike telefoonnommer"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Verwyder module"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Watter grootte wil u vir Windows behou?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add a module"
-msgstr "Voeg module by"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"Toetsbladsy(e) is na die drukker gestuur.\n"
+"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "laat SCSI-modules weg"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Gebruikerskode"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "if needed"
-msgstr "indien nodig"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "laat RAID-modules weg"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) drukkeropsies"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "force"
-msgstr "forseer"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrd opsionele parameters"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Expert Area"
-msgstr "Kundige area"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "kernel version"
-msgstr "bedryfstelselkernweergawe"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol vir die res van die w阹eld"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "default"
-msgstr "verstek"
+msgid "Print test pages"
+msgstr "Druk toetsbladsy(e)"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "General"
-msgstr "Algemeen"
+msgid "64 MB or more"
+msgstr "64MB of meer"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "herlaaiskyfskepping"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size"
-msgstr "Grootte"
+msgid "Not formatted\n"
+msgstr "Nie geformatter\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Module name"
-msgstr "Modulenaam"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Verlaay installasie"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "PXE Server Configuration"
+msgstr "Sluit konfigurasie af"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Beginboodskap"
+msgid "Backup the system files before:"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Install & convert Fonts"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
msgstr ""
+"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
+"wat aan die internet as 'n kli雗t konnekteer. Daar is heelwat "
+"sekuriteitstoetse."
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "Eerste sagteskyfaandrywer"
-#
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Verwyder drukker"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/L阤r/_Verlaat"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Selekteer lOer"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Choose the new size"
+msgstr "Kies die nuwe grootte"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "here if no."
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "click here if you are sure."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "Installeer stelsel"
+msgid "Faroe Islands"
+msgstr "Yslandies"
#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Restart XFS"
+msgstr "Laai dit"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Drukker"
+msgid "Please enter the directory to save to:"
+msgstr "Toets asb. die muis"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Aborteer"
+msgid "Model name"
+msgstr "Modulenaam"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Kantoor"
+msgid "Albania"
+msgstr "Albanies"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Kies die partisies om te formatteer"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normale modus"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "Aborteer"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Hegpunt"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr "Drukkerkonneksietipe"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Sluit konfigurasie af"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "De飊stallasie van RPMs"
+msgid "Network %s"
+msgstr "Netwerkkoppelvlak"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Formateer partisies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s out of range!"
+msgstr "Opsie %s is buite bereik!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "done"
-msgstr "Klaar"
+msgid "Connect %s"
+msgstr "Konnekteer"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "beperk"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Restarting CUPS..."
+msgstr "Laai dit"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "Laai dit"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "Duplikaat hegpunt %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "type1inst building"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#
+#: ../../network/tools.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Konneksiekonfigurasie"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Generies"
+
+#: ../../help.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Quit"
+msgstr "Verlaat"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
+msgid "Myanmar"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Outo-allokeer"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "Toets vir foutiewe areas?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Berei installasie voor"
+msgid "Other MultiMedia devices"
+msgstr "Ander"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Formatteer floppie"
+msgid "No remote machines"
+msgstr "(op hierdie rekenaar)"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search for fonts in installed list"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS-magtiging"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Internetkonneksiedeling is ontsper"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "%s is nie gevind nie"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_0"
+msgstr "Kaart IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "parse all fonts"
+msgid "United Arab Emirates"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "Card IO_1"
+msgstr "Kaart IO_1"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search installed fonts"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
+#: ../../lang.pm:1
+#, c-format
+msgid "Kazakhstan"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
+msgid "Display all available remote CUPS printers"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installasie %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
+msgid "Thai keyboard"
+msgstr "Thai sleutelbord"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
+msgid "Dialup options"
+msgstr "Opbelopsies"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
+msgid ""
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
+"Verander u CDROM!\n"
+"\n"
+"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
+"nie\n"
+"hieroor beskik nie, druk Kanselleer om installasies vanaf di CDROM te vermy."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
+msgid "Polish"
+msgstr "Pools"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Beheersentrum"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "\t-Network by webdav.\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Re-configure interface and DHCP server"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
+"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
+"hardewarekonfigurasieprogram."
+#
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Netmask"
+msgstr "Netmasker"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Plaaslike drukker"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Reeks (seriaal)"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 knoppies"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Watter tipe is u ISDN-konneksie?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
+#, c-format
+msgid "Label"
+msgstr "Etiket"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save on floppy"
+msgstr "Stoor op floppie"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Nuwe drukkernaam"
+msgid "Printer auto-detection"
+msgstr "Gebruik outobespeuring"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "CUPS-bediener IP:"
+msgid "Which of the following is your ISDN card?"
+msgstr "Wat is u ISDN-kaart?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS is 'n popul阹e protokol vir l阤rdeling oor TCP/IP netwerke.\n"
+"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
+"die /etc/exports l阤r opgestel."
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "CUPS-bediener IP:"
+msgid "Msec"
+msgstr "Muis"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "geen netwerkkaart gevind nie"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "U keuse? (verstek %s) "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Frans"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tseggies (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "Op poort %s bespeur"
+
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Drukkerbediener"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Opsomming"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
+msgid "Next"
+msgstr "Teks"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Waar wil u die herlaaistelsel installeer"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese CUPS konfigurasie"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Monitor is nie opgestel nie"
+msgid "Puerto Rico"
+msgstr "Protokol"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-#
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituanies \"nommerry\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
+msgid "Anguilla"
+msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS-domein"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "Antarctica"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
+msgid "Mount options"
+msgstr "Hegopsies:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Drukkerbediener"
+msgid "Jamaica"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
+msgid "Please wait, preparing installation..."
+msgstr "Wag asb. installasie word voorberei"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
+msgid "Czech (QWERTZ)"
+msgstr "Tseggies (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
+msgid "The port number should be an integer!"
+msgstr "Die poortnommer moet heeltal wees."
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "herkonfigureer"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Tik drukkertoestel URI in"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "Herstel vanaf floppie"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable"
-msgstr "Aktiveer"
+msgid "Add to LVM"
+msgstr "Voeg by LVM"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "DNS bediener"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
+msgid "Trinidad and Tobago"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
+msgid "simple"
+msgstr "eenvoudig"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "disable"
-msgstr "deaktiveer"
+msgid "Clear all"
+msgstr "Verwydeer almal"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
+msgid "No test pages"
+msgstr "Geen toetsbladsye"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
+msgid "Adapter %s: %s"
+msgstr "Toestel %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Unknown model"
+msgstr "Onbekende model"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "Werkgroep:"
+msgid "authentication"
+msgstr "Magtiging"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Gebruikerskode"
+msgid "Backup Now"
+msgstr "Stel l阤rstelsels op"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Stoor pakketseleksie"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_L阤r"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
+msgid "Mayotte"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Outoinstallasieskyf word geskep."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "Poort"
+msgid "Searching for scanners ..."
+msgstr "Plaaslike drukker"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Weergawe: %s\n"
+msgid "Partitioning"
+msgstr "Druk"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Current user"
-msgstr "Aanvaar gebruiker"
+msgid "Russia"
+msgstr "Russies"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
+msgid "ethernet card(s) detected"
+msgstr "ethernet kaart(e) bespeur"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Syslog"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Verwyder tou"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Uitwis"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Kies 'root' se wagwoord"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Voeg drukker by"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Voeg module by"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Internet connection configuration"
+msgstr "Internetkonneksiekonfigurasie"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_About..."
+msgstr "/_Aangaande..."
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Down"
-msgstr "Klaar"
+msgid "Bengali"
+msgstr "Aktiveer"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Preference: "
+msgstr "Voorkeure: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Wizard..."
+msgstr "Assistent..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Create a bootdisk"
+msgstr "Maar 'n herlaaiskyf"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "partisie %s"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(module %s)"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
msgstr "Werkgroep:"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "user"
-msgstr "Gebruikerskode"
+msgid "Printer host name or IP"
+msgstr "Drukkerbedienernaam"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "path"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Outoinstallasieskyf word geskep."
+msgid "Show current interface configuration"
+msgstr "Verander drukkerkonfigurasie"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "Ontwikkeling"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Done"
+msgstr "Klaar"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "Plaaslike drukker"
+msgid "Web Server"
+msgstr "Bediener"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (installasievertoondrywer)"
+msgid "Chile"
+msgstr "Sluit af"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP end ip"
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s alreeds bygevoeg)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Sluit konfigurasie af"
+msgid "Add/Del Users"
+msgstr "Voeg gebruiker by"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Sluit konfigurasie af"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Wag asb. installasie word voorberei"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "System Options"
-msgstr "Module opsies:"
+msgid "Here is the full list of available countries"
+msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternatiewe toetsbladsy (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
+"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
+"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Eksterne lpd drukkeropsies"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Sekuriteitsvlak word gestel."
+msgid "Backup user files"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Verstek)"
+msgid "New"
+msgstr "nuut"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Laai vanaf floppie"
+
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "The following printer was auto-detected. "
+msgstr "Dei volgende pakkette gaan verwyder word"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Tik drukkertoestel URI in"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norweegs"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Drukkermodelkeuse"
+msgid "Searching for new scanners ..."
+msgstr "Plaaslike drukker"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Kies 'n l阤r"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Kies 'n l阤r"
+msgid "select path to restore (instead of /)"
+msgstr "Wat is u muistoestel?"
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Konfigureer dienste"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid "China"
msgstr ""
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Kies 'n monitor"
+msgid "Georgia"
+msgstr "Norweegs"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Installeer stelsel"
+msgid "Reading data of installed printers..."
+msgstr "Plaaslike drukker"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "toestel"
+msgid " Erase Now "
+msgstr "Oordrag"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the color of the progress bar"
+msgid "server"
+msgstr "bediener"
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
+msgid "Please Wait... Applying the configuration"
+msgstr "Wag asb... Konfigurasie word toegpas"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the width of the progress bar"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Rekenaarnaam"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Voeg 'n gebruiker by"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "text box height"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text width"
+msgid "I can't find needed image file `%s'."
+msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Dop"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Browse"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Drukkernaam:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjani (latyns)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Resolusie"
+msgid "Package not installed"
+msgstr "Verlaay installasie"
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "herlaaiskyfskepping"
+msgid "Become a MandrakeExpert"
+msgstr "Kundige"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "American Samoa"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No TV Card detected!"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Dra drukkerkonfigurasie oor"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Scanning for TV channels"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Area:"
-msgstr ""
+msgid "You can't select/unselect this package"
+msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "Warning"
+msgstr "Waarskuwing"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
+msgid "Remote host name"
+msgstr "Eksterne bedienernaam"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
+msgid "deactivate now"
+msgstr "deaktiveer nou dadelik"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Frankryk"
+msgid "Computing the size of the Windows partition"
+msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Europa"
+msgid "Italy"
+msgstr "Italiaans"
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Europa"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "Drukkernaam"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "disable"
+msgstr "deaktiveer"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Japan (cable)"
+msgid "error unmounting %s: %s"
+msgstr "fout met onthegting van %s: %s"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do it!"
+msgstr "Gaan voort!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Kanadees (Quebec)"
+msgid "Select model manually"
+msgstr "Eksterne drukkernaam"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "Format"
+msgstr "Formatteer"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"Die mees algemene metode vir ADSL is om pppoe te gebruik.\n"
+"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
+"Indien u nie weet nie, kies 'gebruik pppoe'."
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (broadcast)"
+msgid "Various"
+msgstr "Verskeie"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekondes"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Onbekende model"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Onbekende model"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albanies"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run config tool"
+msgid "Lithuania"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Stel muistoestel op"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Vertoon inligting"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Sien hardeware inligting"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Hardeskyfdeteksie."
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompak"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Op poort %s bespeur"
+msgid "Detected model: %s %s"
+msgstr "%s bespeur"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "Aftas"
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Plaaslike l阤rs"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Aangaande..."
+msgid "maybe"
+msgstr "moontlik"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
+msgid "Panama"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Selekteer 'n videokaart"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65-duisend kleure (16 bis)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Beskrywing"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Help"
+msgid "Size: %d KB\n"
+msgstr "Groote: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Verlaat"
+msgid "Remove fonts on your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Gebruik outobespeuring"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Gebruik outobespeuring"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "X met herlaai"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Opsies"
+msgid "Please enter the directory to save:"
+msgstr "Toets asb. die muis"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Hier is die bestaande drukkertoue.\n"
+"U kan byvoeg or verwyder soos nodig."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+msgid "Connected"
+msgstr "Gekonnekteer"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatering"
+msgid "USB printer \\#%s"
+msgstr "Geen drukker"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "Macedonian"
+msgstr "Masedonies"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
msgstr ""
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Netwerkdrukker (sok)"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/L阤r/_Stoor"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the name of the CPU"
+msgid "Mali"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Naam: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 knoppies"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 knoppies"
+msgid "No details"
+msgstr "Detail"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "baie oulik"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modulenaam"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Preview"
+msgstr "toestel"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Model"
-msgstr "Muis"
+msgid "Remote Control"
+msgstr "Eksterne drukker"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Kaartgeheue (DMA)"
+msgid "Please select media for backup..."
+msgstr "Kies asb. 'n taal om te gebruik."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 bediener: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Media class"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP-Kli雗t"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "vlak"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgies (Russiese uitleg)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Opsies"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatteer"
+msgid "Your printer model"
+msgstr "Eksterne drukkernaam"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Dra drukkerkonfigurasie oor"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Toestand"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Laai die drywers vir u USB-toestelle"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Deens"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Tik drukkertoestel URI in"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "Israelies"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Guiana"
+msgstr "Frans"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "add a rule"
+msgstr "Voeg module by"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Muis"
+msgid "A command line must be entered!"
+msgstr "'n Geldige URI moet verskaf word!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer printer configuration"
+msgstr "Dra drukkerkonfigurasie oor"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Netwerkportaaltoestel"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "old static device name used in dev package"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Selekteer lOer"
+msgid "%s (Port %s)"
+msgstr "Poort"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Korrupte rugsteunl阤r"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr ""
+msgid "Accept user"
+msgstr "Aanvaar gebruiker"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Server"
+msgstr "Bediener"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Swak keuse, probeer weer\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
+msgid "Heard and McDonald Islands"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Skakel oor na kundige gebruiksvlak"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(op hierdie rekenaar)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "blokgrootte"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Location on the bus"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge飊stalleer"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Magtiging"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Drywer"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Eksterne LPD-drukker"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "EIDE/SCSI channel"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Kanselleer"
-
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr ""
+msgid "No mouse"
+msgstr "Geen muis"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "Germany"
+msgstr "Duitsland"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Alternatiewe toetsbladsy (A4)"
+msgid "Austria"
+msgstr "seriaal"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-"Wil u h dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
+msgid "Collapse Tree"
+msgstr "Maak boom toe"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Outoinstallasiekonfigurasieprogram"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
+msgid "Configure networking"
+msgstr "Stel netwerk op"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
+msgid "Where do you want to install the bootloader?"
+msgstr "Waar wil u die herlaaistelsel installeer"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Save as.."
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Probeer asb. weer"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "DHCP client"
+msgstr "DHCP-kli雗t"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Kleurkonfigurasie"
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "Herstel van l閑r %s het gefaal: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Muis (seriaal, ou C7 tipe)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "Formatering"
+msgid "New devfs device"
+msgstr "Netwerkportaaltoestel"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "interessant"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Herlaaistylkonfigurasie"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Drukkerbediener"
+msgid "Automatic time synchronization"
+msgstr "Outotydsinkronisasie met NTP"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Dienste"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS-bediener"
+#: ../../share/advertising/01-thanks.pl:1
+#, c-format
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS-bediener"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "Armenies (Foneties)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
+msgid "Card model:"
+msgstr "Kaartgeheue (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS-bediener"
+msgid "Thin Client"
+msgstr "DHCP-Kli雗t"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domeinnaam"
+msgid "Start Server"
+msgstr "NIS-bediener"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid "Turkmenistan"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
+msgid "All remote machines"
+msgstr "(op hierdie rekenaar)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Konfigurasie"
+msgid "Install themes"
+msgstr "Installeer stelsel"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mail alert"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
+msgid "Espanol"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Content of the file"
-msgstr ""
+msgid "Preparing installation"
+msgstr "Berei installasie voor"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Calendar"
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Choose file"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "Voeg gebruiker by"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "but not matching"
+msgid "Nauru"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "matching"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "Berei installasie voor"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Settings"
+msgid "Auto-detect printers connected directly to the local network"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
+msgid "LAN configuration"
+msgstr "LAN-konfigurasie"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "search"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Kaartgeheue (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr ""
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Syslog"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "Beginboodskap"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "User"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Help/_Aangaande..."
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opsies/Toets"
+msgid "Iranian"
+msgstr "Iranies"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/L阤r/-"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Croatia"
+msgstr "Kroaties"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/L阤r/Stoor _as"
+msgid "Gateway:"
+msgstr "Portaal:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Voeg gebruiker by"
-#: ../../standalone/logdrake:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/L阤r/_Stoor"
+msgid "Remote printer name"
+msgstr "Eksterne drukkernaam"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/L阤r/_Oopmaak"
+msgid "Device: "
+msgstr "Toestel:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printerdrake"
+msgstr "Drukker"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/L阤r/_Nuut"
+msgid "License agreement"
+msgstr "Lisensieooreenkoms"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "Module opsies:"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show only for the selected day"
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Gebruik sekuriteitsvlak"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Wat is u muistoestel?"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konnekteer"
+msgid ", USB printer"
+msgstr "Geen drukker"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Diskonnekteer"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Choose the applications that will support the fonts:"
+msgstr "Kies die partisies om te formatteer"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "received"
-msgstr ""
+msgid "Configure X"
+msgstr "Stel X op"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turks (tradisionele \"F\" model)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Congratulations!"
+msgstr "Geluk!"
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "sent: "
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use owner id for execution"
+msgstr "Gebruik outobespeuring"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Plaaslike l阤rs"
+msgid "Down"
+msgstr "Klaar"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "average"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Kleurkonfigurasie"
+msgid "Install rpm"
+msgstr "Installasie"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Konneksiespoed"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Tyd oor "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "UK keyboard"
+msgstr "VK sleutelbord"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "Unmount"
+msgstr "Ontheg"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Konnekteer aan die internet"
+msgid "Uninstall Fonts"
+msgstr "De飊stallasie van RPMs"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Konnekteer aan die internet"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konneksie word getoets..."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German (no dead keys)"
+msgstr "Duits (geen dooie sleutels)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
+msgid "Transferring %s..."
+msgstr "%s word oorgedra..."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Konneksietipe:"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32-duisend kleure (15 bis)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Stoor in l阤r"
+msgid "Reboot"
+msgstr "Basis"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Statistics"
+msgid "Gambia"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profiel:"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Plaaslike drukker"
+msgid "Mandrake Control Center"
+msgstr "Beheersentrum"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Selekteer 'n videokaart"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(op hierdie rekenaar)"
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Verwyder tou"
+msgid "Remember this password"
+msgstr "Geen wagwoord"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s bespeur"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Internetkonneksiedeling is geaktiveer"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Voeg gebruiker by"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by SSH.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Gebruik beskikbare spasie"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(op hierdie rekenaar)"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Wil u 'n drukwerk nou konfigureer?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86-drywer: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Druk"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Kies die pakkette wat u wil installeer"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Papua New Guinea"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Serbian (cyrillic)"
+msgstr "Serwies (Kirillies)"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Wil u hierdie drukker (\"%s\")\n"
+"die verstek drukker maak?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Druk"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Herlaaiskyf word geskryf"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Plaaslike drukker"
+msgid "Wait please, testing your connection..."
+msgstr "Konneksie word getoets..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "Bringing down the network"
+msgstr "Netwerk op pad af"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Aantekenkode"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS is 'n popul阹e protokol vir l阤rdeling oor TCP/IP netwerke.\n"
+"Hierdie diens vorosien die NFS-l阤rsluitfunksionaliteit."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Herlaaitoestel"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP-Kli雗t"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Plaaslike drukker"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr "ignoreer/sien oor"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Gebruik outobespeuring"
+msgid "Printing/Scanning on \"%s\""
+msgstr "Netwerk op pad af"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "laat RAID-modules weg"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
+"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is unsupported"
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "Internetkonneksiekonfigurasie"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Poort"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", "
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "%s bespeur"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid " ("
-msgstr ""
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Selekteer 'n videokaart"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Wil u die werklik die drukker verwyder?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
+msgid "I can't find any room for installing"
+msgstr "Ek kon geen plek vir installasie vind nie."
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Op poort %s bespeur"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Default printer"
+msgstr "Verstek drukker"
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
+"U het meer as een internetkonneksiemetode opgste.\n"
+"Kies die een wat u verlang.\n"
+"\n"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Verander RAID"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
+"PCI-kaart op die volgende skerm."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Add user"
+msgstr "Voeg gebruiker by"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-skywe %s\n"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "seriaal"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Kies u sleutelbord"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
+msgid "Format partitions"
+msgstr "Formateer partisies"
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Outomatiese CUPS konfigurasie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Drukkerdata word gelees..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "Druk"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Teruglus l阤rnaam: %s"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "Moet nie drukkers oordra nie"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Dra drukkerkonfigurasie oor"
+msgid "Delay before booting the default image"
+msgstr "Wagperiode voro verstekstelsel gelaai word"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Kliek asb. op 'n partisie"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Gebruikerskode"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Korrupte rugsteunl阤r"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Configure"
+msgstr "Konfigureer"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Selekteer 'n videokaart"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Tik asb die rekenaarnaam in.\n"
+"Dit moet 'n volle gekwalifiseerde naam wees,\n"
+"bv. ``myne.mywerk.co.za''.\n"
+"U mag ook die netwerkhek byvoeg indien daar een is"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Kies drukkerspoelprogram"
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Kies 'n nuwe grootte"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Plaaslike drukker"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Sekere belangrike pakkette het nie korrek ge飊stalleer nie.\n"
+"觙 die CDROM-aandrywer 骹 die CD is foutief.\n"
+"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
+"rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "%s bespeur"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
-#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Azerbaijan"
+msgstr "Albanies"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (VSA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Hoe is die drukker gekonekteer?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Kundige"
+msgid "Security level"
+msgstr "Sekuriteitsvlak word gestel."
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Resolusie"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Dienste"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Kundige"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -17091,10 +17129,6 @@ msgstr ""
"gnumeric), PDF-sigprogramme, ens."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Speletjiesrekenaar"
@@ -17170,10 +17204,6 @@ msgstr ""
"versameling bygaande hulpprogramme"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome werkstasie"
@@ -17194,10 +17224,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitl阤rs"
@@ -17269,40 +17295,82 @@ msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimediastasie"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
+"en om ook die web deur te blaai."
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetkonneksie en konfigurasie"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
+#~ msgid "Configure the connection"
+#~ msgstr "Stel netwerk op"
+
+#~ msgid "Disconnect"
+#~ msgstr "Diskonnekteer"
+
+#~ msgid "Connect"
+#~ msgstr "Konnekteer"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan u konneksie herkonfigureer."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan aan die internet konnekter of u konneksie herkonfigureer."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "U is nie tans aan die internet gekonnekteer nie."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan diskonnekteer or herkonfigureer."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "U is tans aan die internet gekonnekteer."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Speletjiesrekenaar"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Klank- en videospelers/redigeerders"
+#~ msgid "Author:"
+#~ msgstr "Aftas"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Speletjiesrekenaar"
+#~ msgid "Audio station"
+#~ msgstr "Multimediastasie"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Grafiese programme soos Die GIMP"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Klank- en videospelers/redigeerders"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
+#~ msgid "Video station"
+#~ msgstr "Speletjiesrekenaar"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Klank- en videospelers/redigeerders"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Speletjiesrekenaar"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafiese programme soos Die GIMP"
#, fuzzy
#~ msgid "Printer sharing"
@@ -17473,10 +17541,6 @@ msgstr ""
#~ "nie, dan het u nie /boot nodig nie."
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Opgradeer"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Wil u die konfigurasie toets?"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
index 788f85633..634899b82 100644
--- a/perl-install/share/po/ar.po
+++ b/perl-install/share/po/ar.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-04 16:58-0300\n"
"Last-Translator: Mohammed Gamal <f2c2001@yahoo.com>\n"
"Language-Team: Arabic\n"
@@ -15,948 +15,1756 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "噩丕乇賷 毓賲賱 賲爻丨 賱賱鬲噩夭卅丕鬲 賱廿賷噩丕丿 賳賯丕胤 丕賱鬲丨賲賷賱"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "if set to yes, check additions/removals of suid root files."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "賲賳賮匕 胤丕亘毓丞 丕賱卮亘賰丞"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "賮囟賱丕賸 兀丿禺賱 賯乇氐 賲乇賳:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"丕賱賲卮丕乇賰丞 賱賰賱 賲爻鬲禺丿賲 鬲爻鬲禺丿賲 丕賱賲噩賲賵毓丞 \"fileshare\".\n"
-"賷賲賰賳賰 兀賳 鬲爻鬲禺丿賲 userdrake 賱廿囟丕賮丞 賲爻鬲禺丿賲 賮賷 賴匕賴 丕賱賲噩賲賵毓丞."
+"噩丿賵賱 丕賱鬲賯爻賷賲 丕賱賲丨賮賵馗 賱賷爻 亘賳賮爻 丕賱丨噩賲\n"
+"賱丕 夭賱鬲 鬲乇賷丿 丕賱廿賰賲丕賱責"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "丕賱睾丕亍"
+msgid "Which username"
+msgstr "兀賷 丕爻賲 賲爻鬲禺丿賲"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "卮睾賾賱 userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "賲丕 賳賵毓 丕賱賲丿禺賱 丕賱匕賷 鬲乇賷丿 丕囟丕賮鬲賴責"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "丕爻鬲毓丕丿丞 噩丿賵賱 丕賱鬲賯爻賷賲"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "毓賱賶 禺丕丿賲 CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "鬲賴賷卅丞 賲丕 亘毓丿 丕賱鬲孬亘賷鬲"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "丕爻鬲禺丿賲 ``%s'' 亘丿賱丕 賲賳 匕賱賰"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "丕賱賳賵毓"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"賴賱 鬲乇賷丿 丕賱爻賲丕丨 賱賱賲爻鬲禺丿賲賷賳 亘賲卮丕乇賰丞 亘毓囟 丕賱兀丿賱丞 丕賱禺丕氐丞 亘賴賲責\n"
-"丕賱爻賲丕丨 亘匕賱賰 爻賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 亘兀賳 賷賳賯乇賵丕 夭乇 丕賱賲卮丕乇賰丞 賮賷 賰賵賳賰賷賵乇乇 賵 賳賵鬲賷賱賵爻.\n"
"\n"
-"\"賲禺氐氐\" 賷爻賲丨 賱賰 亘毓賲賱 丕毓丿丕丿丕鬲 禺丕氐 賱賰賱 賲爻鬲禺丿賲.\n"
+"兀賷囟丕賸 丕賱胤丕亘毓丕鬲 丕賱賲賴賷卅丞 亘賲賱賮丕鬲 PPD 賲賳 賲氐賳賾毓賷賴丕 兀賵 亘賲卮睾賱丕鬲 CUPS 丕賱禺丕氐丞 亘賴丕 賱丕 "
+"賷賲賰賳 賳賯賱賴丕."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "丕賱丨夭賲丞 丕賱囟乇賵乇賷丞 %s 賲賮賯賵丿丞"
+msgid "Sri Lanka"
+msgstr "爻乇賷賱丕賳賰丕"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "賷賲賰賳賰 丕賱鬲氐丿賷乇 亘丕爻鬲禺丿丕賲 NFS 兀賵 Samba. 兀賷 賲賳賴賲丕 鬲乇賷丿"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"丕賱胤丕亘毓丕鬲 丕賱鬲丕賱賷丞\n"
+"\n"
+"%s%s\n"
+"賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "丕賱丨夭賲丞 %s 賷噩亘 兀賳 鬲購孬亘賾鬲. 賴賱 鬲乇賷丿 鬲孬亘賷鬲賴丕責"
+msgid "Central African Republic"
+msgstr "噩賲賴賵乇賷丞 賵爻胤 兀賮乇賷賯賷丞"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "賲禺氐氐"
+msgid "Gateway device"
+msgstr "噩賴丕夭 丕賱亘賵丕亘丞"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "丕爻賲丨 賱賰賱 丕賱賲爻鬲禺丿賲賷賳"
+msgid "Net Method:"
+msgstr "Net Method:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "賱丕 賲卮丕乇賰丞"
+msgid "Ethernetcard"
+msgstr "亘胤丕賯丞 丕賷孬乇賳鬲"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "丕賱賲夭賷丿"
+msgid "Parameters"
+msgstr "Parameters"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "賴丕 賴賷 賯丕卅賲丞 賰丕賲賱丞 亘賰賱 賱賵丨丕鬲 丕賱亘賱丕丿 丕賱賲鬲賵賮乇丞"
+msgid "Auto-detect"
+msgstr "鬲丨賯賯 丌賱賷"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "賮囟賱丕賸 丕禺鬲乇 亘賱丿賰."
+msgid "Interface:"
+msgstr "丕賱賵丕噩賴丞:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "乇賷賵賳賷賵賳"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "丕禺鬲乇 賳賵毓 丕賱鬲孬亘賷鬲"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "丕賱亘賱丿"
+msgid "on CDROM"
+msgstr "毓賱賶 丕賱賯乇氐 丕賱賲丿賲噩"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "賰賱 丕賱賱睾丕鬲"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"賱丕 賷亘丿賵 兀賳 丕賱賳馗丕賲 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲.\n"
+"丨丕賵賱 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "丕爻鬲禺丿賲 賷賵賳賷賰賵丿 丕賮鬲乇丕囟賷丕賸"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"賵氐賾賱 丕賱胤丕亘毓丞 丕賱賶 禺丕丿賲 賱賷賳賰爻 賵 丕噩毓賱 賲丕賰賷賳丕鬲 Windows 鬲鬲氐賱 亘賴 賰毓賲賱丕亍.\n"
+"\n"
+"賴賱 鬲乇賷丿 賮毓賱丕賸 賲鬲丕亘毓丞 丕毓丿丕丿 賴匕賴 丕賱胤丕亘毓丞 賰賲丕 鬲賮毓賱 丕賱丌賳責"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "乇賵爻賷丕 丕賱亘賷囟丕亍"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "禺胤兀 兀孬賳丕亍 丕賱賰鬲丕亘丞 丕賱賶 丕賱賲賱賮 %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"賷丿毓賲 Mandrake Linux 丕賱毓丿賷丿 賲賳 丕賱賱睾丕鬲. 丕禺鬲乇\n"
-"丕賱賱睾丕鬲 丕賱鬲賷 鬲乇賷丿 鬲孬亘賷鬲賴丕. 爻鬲賰賵賳 賴匕賴 賲鬲賵賮乇丞賸 毓賳丿\n"
-"丕賰鬲賲丕賱 丕賱鬲孬亘賷鬲 賵 丕毓丿丕丞 鬲卮睾賷賱 丕賱賳馗丕賲."
+"鬲購爻鬲禺丿賲 apmd 賱賲乇丕賯亘丞 丨丕賱丞 丕賱亘胤丕乇賷丞 賵 鬲爻噩賷賱賴丕 毓賳 胤乇賷賯 syslog.\n"
+"賷賲賰賳 賰匕賱賰 丕爻鬲禺丿丕賲賴丕 賱廿睾賱丕賯 丕賱噩賴丕夭 毓賳丿 囟毓賮 丕賱亘胤丕乇賷丞."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "乇噩丕亍 丕禺鬲乇 賱睾丞 丕賱丕爻鬲禺丿丕賲."
+msgid "Use tape to backup"
+msgstr "丕爻鬲禺賲 丕賱卮乇賷胤 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "丕禺鬲乇 賲丿賷乇 丕賱賳賵丕賮匕 丕賱匕賷 爻賷鬲賲 鬲卮睾賷賱賴:"
+msgid "The following packages are going to be installed"
+msgstr "爻賷鬲賲 鬲孬亘賷鬲 丕賱丨夭賲 丕賱鬲丕賱賷丞"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "丕禺鬲乇 丕賱賲爻鬲禺丿賲 丕賱丕賮鬲乇丕囟賷:"
+msgid "CUPS configuration"
+msgstr "CUPS 鬲賴賷卅丞"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲 賴匕賴 丕賱賲賷夭丞責"
+msgid "Hong Kong"
+msgstr "賴賵賳噩 賰賵賳噩"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "賷賲賰賳 丕毓丿丕丿 噩賴丕夭賰 賱鬲爻噩賷賱 丕賱丿禺賵賱 丌賱賷丕賸 賱賲爻鬲禺丿賲 賲毓賷賳."
+msgid "Not enough free space to allocate new partitions"
+msgstr "賱丕 鬲賵噩丿 賲爻丕丨丞 賮丕乇睾丞 賱毓賲賱 丕賱鬲噩夭卅丕鬲 丕賱噩丿賷丿丞"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "丿禺賵賱 丌賱賷"
+msgid "Moving"
+msgstr "噩丕乇賷 丕賱賳賯賱"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "兀賷賯賵賳丞"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"賳卮丕胤丕鬲 Drakbackup 毓賳 胤乇賷賯 %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "丕賱睾賱丕賮"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "賰賱賲丞 丕賱賲乇賵乇 (孬丕賳賷丞)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"兀賴賱丕賸 亘賰 賮賷 賲毓丕賱噩 鬲賴賷卅丞 丕賱卮亘賰丞.\n"
+"\n"
+"賳丨賳 毓賱賶 賵卮賰 鬲賴賷卅丞 賵氐賱丞 丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 丕賱禺丕氐丞 亘賰.\n"
+"丕匕丕 賱賲 鬲乇賷丿 丕爻鬲禺丿丕賲 丕賱鬲丨賯賯 丕賱丌賱賷, 丕丨匕賮 丕賱鬲兀卮賷乇 賲賳 毓賱賶 丕賱氐賳丿賵賯.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "賰賱賲丞 丕賱賲乇賵乇"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "丕爻賲 丕賱賲爻鬲禺丿賲"
+msgid "Lebanon"
+msgstr "賱亘賳丕賳"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "丕賱丕爻賲 丕賱丨賯賷賯賷"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "賵丕賮賯 毓賱賶 丕賱賲爻鬲禺丿賲"
+msgid "Stop"
+msgstr "鬲賵賯賮"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "丕賳鬲賴賶"
+msgid "Edit selected host"
+msgstr "丨乇乇 丕賱賲爻鬲囟賷賮 丕賱賲禺鬲丕乇"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No CD device defined!"
+msgstr "賱賲 賷鬲賲 鬲毓乇賷賮 噩賴丕夭 賯乇氐 賲丿賲噩!"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "丕賱亘賱睾丕乇賷丞 (氐賵鬲賷丞)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "DHCP start ip"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 賰賷賱賵亘丕賷鬲"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "禺賷丕乇丕鬲 賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱乇卅賷爻賷丞"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"兀丿禺賱 賲爻鬲禺丿賲\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "丕囟賮 賲爻鬲禺丿賲"
+msgid "Tape"
+msgstr "卮乇賷胤 丕賱亘賷丕賳丕鬲"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 賲購囟丕賮 賲爻亘賯丕"
+msgid "Scanning network..."
+msgstr "噩丕乇賷 賲爻丨 丕賱卮亘賰丞..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 胤賵賷賱 噩丿丕賸"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"亘賴匕丕 丕賱禺賷丕乇 賷賲賰賳賰 丕爻鬲乇噩丕毓 兀賷 賳爻禺丞 賲賳\n"
+" 丿賱賷賱 /etc 丕賱禺丕氐 亘賰."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 賷噩亘 兀賳 賷丨鬲賵賷 賮賯胤 毓賱賶 丕賱丨乇賵賮 丕賱氐睾賷乇丞, 丕賱兀乇賯丕賲, `-' 賵 `_'"
+msgid "Malaysia"
+msgstr "賲丕賱賷夭賷丕"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "乇噩丕亍賸 賯賲 亘廿毓胤丕亍 丕爻賲 賲爻鬲禺丿賲"
+msgid "Swiss (French layout)"
+msgstr "丕賱爻賵賷爻乇賷丞 (鬲氐賲賷賲 賮乇賳爻賷)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "賰賱賲丞 丕賱賲乇賵乇 賴匕賴 亘爻賷胤丞 噩丿丕"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "賮卮賱 mkraid (乇亘賲丕 鬲賰賵賳 丨夭賲丞 raidtools 賲賮賯賵丿丞責)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "賰丕賲賷乇丕鬲 丕賱賵賷亘"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "丨噩賲 (丕賱賲爻鬲賵賶 丕賱孬丕賳賷)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "亘胤丕賯丞 丕賱氐賵鬲"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr "賱胤亘丕毓丞 賲賱賮 賲賳 爻胤乇 丕賱兀賵丕賲乇 丕爻鬲禺丿丕賲 丕賱兀賲乇 \"%s <file>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "乇噩丕亍 噩丕賵賱 賲乇丞 兀禺乇賶"
+msgid "Level %s\n"
+msgstr "丕賱賲爻鬲賵賶 %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "賰賱賲丕鬲 丕賱賲乇賵乇 睾賷乇 賲鬲胤丕亘賯丞"
+msgid "Luxembourg"
+msgstr "賱賵賰爻賲亘賵乇睾"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(鬲賲 丕囟丕賮丞 %s 賲爻亘賯丕)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" 鬲賯乇賷乇 賲乇丕賯亘 DrakBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "丕賱賵氐賵賱 丕賱賶 兀丿賵丕鬲 丕賱鬲噩賲賷毓"
+msgid "Iran"
+msgstr "丕賷乇丕賳"
-#: ../../any.pm:1
+# U+200F (RTL mark) has been inserted after "Bus" so the display
+# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "丕賱賵氐賵賱 丕賱賶 兀丿賵丕鬲 丕賱卮亘賰丞"
+msgid "Bus"
+msgstr "Bus鈥"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "丕賱賵氐賵賱 丕賱賶 賲賱賮丕鬲 丕賱廿丿丕乇丞"
+msgid "Iraq"
+msgstr "丕賱毓乇丕賯"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "丕爻賲丨 亘賭\"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"鬲賲 丕賷噩丕丿 鬲毓丕乇囟 賮賷 毓賳賵丕賳 丕賱卮亘賰丞 丕賱賲丨賱賷丞 丕賱賲亘丿卅賷 賮賷 丕賱廿毓丿丕丿 丕賱丨丕賱賷 賱賭%s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "丕賱賵氐賵賱 丕賱賶 兀丿賵丕鬲 rpm"
+msgid "Configuring..."
+msgstr "噩丕乇賷 丕賱廿毓丿丕丿..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "丕賱賵氐賵賱 丕賱賶 亘乇丕賲噩 X"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "鬲賲 毓賲賱 丕賱鬲賳氐賷亘, 賵 賴賵 賲賲賰賾賻賳 丕賱丌賳."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"賴丕 賴賳丕 丕賱賲丿禺賱丕鬲 丕賱賲禺鬲賱賮丞.\n"
-"賷賲賰賳賰 丕囟丕賮丞 賲丿禺賱丕鬲 兀禺乇賶 兀賵 鬲睾賷賷乇 丕賱賲賵噩賵丿賷賳."
+"賱兀睾賱亘 亘胤丕賯丕鬲 丕賱鬲賱賮丕夭 丕賱丨丿賷孬丞, 賵丨丿丞 bttv 賱賳賵丕丞 賱賷賳賰爻 賷賲賰賳賴丕 丕賱鬲丨賯賯 丌賱賷丕賸 賲賳 "
+"丕賱賲毓丕賲賱丕鬲 丕賱氐丨賷丨丞.\n"
+"丕匕丕 鬲賲 丕賱鬲毓乇賮 毓賱賶 丕賱亘胤丕賯丞 亘卮賰賱 禺丕胤卅, 賷賲賰賳賰 丕丿禺丕賱 丕賱鬲賵賳乇 賵 賳賵毓 丕賱亘胤丕賯丞 丕賱氐丨賷丨 "
+"賴賳丕. 賮賯胤 丕禺鬲乇 丕賱賲毓丕賲賱丕鬲 丕賱賲賳丕爻亘丞 賱亘胤丕賯丞 丕賱卮丕卮丞."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "賳馗丕賲 丌禺乇 (Windows...)"
+msgid "Password (again)"
+msgstr "賰賱賲丞 丕賱賲乇賵乇 (孬丕賳賷丞)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "賳馗丕賲 丌禺乇 (MacOS...)"
+msgid "Search installed fonts"
+msgstr "丕亘丨孬 賮賷 丕賱禺胤賵胤 丕賱賲孬亘鬲丞"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "賳馗丕賲 丌禺乇 (SunOS...)"
+msgid "Venezuela"
+msgstr "賮賷賳夭賵賷賱丕"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "賱賷賳賰爻"
+msgid "IP address"
+msgstr "毓賳賵丕賳 IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "賲丕 賳賵毓 丕賱賲丿禺賱 丕賱匕賷 鬲乇賷丿 丕囟丕賮鬲賴責"
+msgid "Choose the sizes"
+msgstr "丕禺鬲乇 丕賱兀丨噩丕賲"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "賴匕賴 丕賱毓賱丕賲丞 賲爻鬲禺丿賲丞 賲爻亘賯丕"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"賯丕卅賲丞 亘丕賱亘賷丕賳丕鬲 丕賱賮丕爻丿丞:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "賷噩亘 毓賱賷賰 鬲丨丿賷丿 鬲賯爻賷賲 噩匕乇"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"丕賱賲賵丿賲 賱丿賷賰 睾賷乇 賲丿毓賵賲 賲賳 丕賱賳馗丕賲.\n"
+"丕賱賯 賳馗乇丞 毓賱賶 http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "賷噩亘 兀賳 鬲丨丿丿 氐賵乇丞 丕賱賳賵丕丞"
+msgid "Choose another partition"
+msgstr "廿禺鬲乇 卮丕卮丞"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "睾賷乇 賲爻賲賵丨 亘丕賱毓賱丕賲丕鬲 丕賱賮丕乇睾丞"
+msgid "Current user"
+msgstr "丕賱賲爻鬲禺丿賲 丕賱丨丕賱賷"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "丕賱廿賮鬲乇丕囟賷"
+msgid "Username"
+msgstr "丕爻賲 丕賱賲爻鬲禺丿賲"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "賱丕 賮賷丿賷賵"
+msgid "Left \"Windows\" key"
+msgstr "賲賮鬲丕丨 \"Windows\" 丕賱兀賷爻乇"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "丨噩賲 Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "鬲賴賷卅丞 禺丕丿賲 dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "丕賱丨丕賯"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"賷購爻鬲禺丿賲 賱賱丿賱賷賱:\n"
+" 賷賲賰賳 賮賯胤 賱賲丕賱賰 賴匕丕 丕賱丿賱賷賱 兀賵 丕賱賲賱賮 丕賱睾丕丐賴"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "毓賳賵丕賳"
+msgid "Guyana"
+msgstr "睾賵賷丕賳丕"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "睾賷乇 丌賲賳"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " 毓賱賶 禺丕丿賲 Novell \"%s\", 丕賱胤丕亘毓丞 \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "丕賱噩丿賵賱"
+msgid "Remove a module"
+msgstr "丕夭丕賱丞 賵丨丿丞"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "賰賱賲丞 丕賱賲乇賵乇"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr "廿毓丿丕丿 賲鬲賯丿賲"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr "噩丕乇賷 丕賱賲爻丨 毓賱賶 噩賴丕夭 HP 賲鬲毓丿丿 丕賱賵馗丕卅賮"
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "丕賱噩匕乇"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "賱賱賯乇丕亍丞 賵 丕賱賰鬲丕亘丞"
+msgid "Choose an existing RAID to add to"
+msgstr "丕禺鬲乇 RAID 賲賵噩賵丿 賱賱丕囟丕賮丞"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "丕賱鬲乇賰賷丞 (胤乇丕夭 \"Q\" 丕賱丨丿賷孬)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "賵囟毓賷丞 丕賱賮賷丿賷賵"
+msgid "Lilo message not found"
+msgstr "賱賲 賷鬲賲 丕賷噩丕丿 乇爻丕賱丞 Lilo"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "氐賵乇丞"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"丕毓丕丿丞 鬲賵賱賷丿 丌賱賷丞 賱鬲乇賵賷爻丞 丕賱賳賵丕丞 賮賷 丿賱賷賱 /boot 賱賭\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Default OS?"
-msgstr "賳馗丕賲 丕賱鬲卮睾賷賱 丕賱丕賮鬲乇丕囟賷責"
+msgid "if needed"
+msgstr "丕匕丕 丕丨鬲噩鬲賴"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "鬲賲賰賷賳 丕賯賱丕毓 OF責"
+msgid "Restore Failed..."
+msgstr "賮卮賱鬲 丕賱廿爻鬲毓丕丿丞..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "鬲賲賰賷賳 丕賱廿賯賱丕毓 賲賳 丕賱賯乇氐 丕賱賲丿賲噩責"
+msgid "/Autodetect _jazz drives"
+msgstr "/鬲丨賯賯 丌賱賷 賲賳 _爻賵丕賯丕鬲 Jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "丕賱賵賯鬲 丕賱兀賯氐賶 賱廿賯賱丕毓 丕賱賳賵丕丞"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Boot device"
-msgstr "噩賴丕夭 丕賱廿賯賱丕毓"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"丕賱廿丨丿丕孬賷 丕賱爻賷賳賷 賱賱乇賰賳 丕賱兀賷爻乇 丕賱兀毓賱賶\n"
+"賱卮乇賷胤 丕賱鬲賯丿賲"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Init Message"
-msgstr "乇爻丕賱丞 Init"
+msgid "Current interface configuration"
+msgstr "鬲賴賷卅丞 丕賱賵丕噩賴丞 丕賱丨丕賱賷丞"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱賲購爻鬲禺丿賲"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "禺賷丕乇丕鬲 賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱乇卅賷爻賷丞"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 ISA, 賮廿賳 丕賱賯賷賲 丕賱鬲賷 爻鬲毓乇囟 毓賱賶 丕賱卮丕卮丞 丕賱鬲丕賱賷丞 賷噩亘 兀賳 鬲賰賵賳 "
+"氐丨賷丨丞.\n"
+"\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 PCMCIA, 賷噩亘 毓賱賷賰 兀賳 鬲毓乇賮 賯賷賲 \"irq\" 賵 \"io\" 丕賱禺丕氐丞 "
+"亘亘胤丕賯鬲賰.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "禺賷丕乇 ``鬲卮丿賷丿 禺賷丕乇丕鬲 爻胤乇 丕賱兀賵丕賲乇`` 亘丿賵賳 賯丕卅丿丞 賲賳 丿賵賳 賰賱賲丞 賲乇賵乇"
+msgid "Do not print any test page"
+msgstr "賱丕 鬲胤亘毓 兀賷 氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "丕賰鬲亘 丨噩賲 丕賱匕丕賰乇丞 亘丕賱賲賷睾丕亘丕賷鬲"
+msgid "Gurmukhi"
+msgstr "睾賵乇賲賵賰賴賷"
#: ../../any.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "鬲賲賰賷賳 丕賱鬲卮賰賷賱丕鬲 丕賱賲鬲毓丿丿丞"
+msgid "Force No APIC"
+msgstr "丕噩亘丕乇 毓賱賶 毓丿賲 丕爻鬲禺丿丕賲 APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "丨噩賲 丕賱匕丕賰乇丞 丕賱丿賯賷賯 毓賳丿 丕賱丨丕噩丞 )鬲賲 丕賷噩丕丿 %d 賲賷睾丕亘丕賷鬲("
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "賰賱賲丞 丕賱賲乇賵 賴匕賴 賯氐賷乇丞 噩丿丕賸 (賷噩亘 兀賳 鬲賰賵賳 %d 乇賲賵夭 毓賱賶 丕賱兀賯賱)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "賯賲 亘鬲賳馗賷賮 /tmp 毓賳丿 賰賱 廿賯賱丕毓"
+msgid "[keyboard]"
+msgstr "[keyboard]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "兀賳卮卅 賯乇氐 廿賯賱丕毓"
+msgid "FTP proxy"
+msgstr "亘乇賵賰爻賷 FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "restrict"
-msgstr "鬲卮丿賷丿"
+msgid "Install List"
+msgstr "孬亘賾鬲 丕賱賯丕卅賲丞"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restrict command line options"
-msgstr "鬲卮丿賷丿 禺賷丕乇丕鬲 爻胤乇 丕賱兀賵丕賲乇"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"睾賷賾乇\n"
+"賲爻丕乇 丕賱廿爻鬲毓丕丿丞"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Force No APIC"
-msgstr "丕噩亘丕乇 毓賱賶 毓丿賲 丕爻鬲禺丿丕賲 APIC"
+msgid "Show only for the selected day"
+msgstr "廿毓乇囟 爻噩賱丕鬲 丕賱賷賵賲 丕賱賲禺鬲丕乇 賮賯胤"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enable ACPI"
-msgstr "鬲賲賰賷賳 ACPI"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "鬲賵賯賷鬲 賲丕 賯亘賱 丕賯賱丕毓 丕賱氐賵乇丞 丕賱丕賮鬲乇丕囟賷丞"
+msgid "512 kB"
+msgstr "512 賰賷賱賵亘丕賷鬲"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "compact"
-msgstr "賲丿賲噩"
+msgid "Logs"
+msgstr "丕賱爻噩賱丕鬲"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Compact"
-msgstr "賲丿賲噩"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(賲賱丨賵馗丞: 丕賱賲賳丕賮匕 丕賱賲鬲賵丕夭賷丞 賱丕 賷賲賰賳 丕賱鬲丨賯賯 賲賳賴丕 丌賱賷丕賸)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bootloader installation"
-msgstr "鬲孬亘賷鬲 賲丨賲賱 丕賱廿賯賱丕毓"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "丕賱賯胤丕毓 丕賵賱 賲賳 鬲噩夭卅丞 丕賱廿賯賱丕毓"
+msgid "What kind of card do you have?"
+msgstr "賲丕 賴賵 賳賵毓 丕賱亘胤丕賯丞 賱丿賷賰責"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "丕賱賯胤丕毓 丕賱兀賵賱 賲賳 丕賱賯乇氐 (MBR)"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "兀賷賳 鬲乇賷丿 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓責"
+msgid "Security"
+msgstr "丕賱兀賲賳"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "鬲孬亘賷鬲 LILO/grub"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"賷賲賰賳賰 賰匕賱賰 丕爻鬲禺丿丕賲 丕賱亘乇賳丕賲噩 丕賱乇爻賵賲賷 \"xpdq\" 賱鬲毓賷賷賳 丕賱禺賷丕乇丕鬲 賵 丕賱鬲毓丕賲賱 賲毓 "
+"賵馗丕卅賮 丕賱胤亘丕毓丞.\n"
+"丕匕丕 賰賳鬲 鬲爻鬲毓賲亘 賰賷丿賷 賰亘賷卅丞 爻胤丨 賲賰鬲亘 賮賱丿賷賰 兀賷賯賵賳丞 \"賱賱胤賵丕乇卅\", 丕爻賲賴丕 \"STOP "
+"Printer!\", 鬲賯賵賲 亘廿賷賯丕賮 賰賱 賵馗丕卅賮 丕賱胤亘丕毓丞 賮賵乇丕賸 毓賳丿 丕賱賳賯乇 毓賱賷賴丕. 賴匕丕 丕賱賲孬丕賱 "
+"賲賮賷丿 賱賱丨丕賱丕鬲 丕賱鬲賷 賷丨氐賱 賮賷賴丕 鬲毓孬乇 賮賷 丕爻鬲禺丿丕賲 丕賱賵乇賯.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "鬲孬亘賷鬲 SILO"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Skip"
-msgstr "鬲禺胤賷"
+msgid "Unknown"
+msgstr "睾賷乇 賲毓乇賵賮"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "毓賱賶 賯乇氐 賲乇賳"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "賴匕丕 丕賱禺丕丿賲 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞 賲爻亘賯丕賸, 賱丕 賷賲賰賳 丕囟丕賮鬲賴 賲乇丞 兀禺乇賶.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "丕賱賯胤丕毓 丕賱兀賵賱 賲賳 丕賱鬲噩夭卅丞 丕賱噩匕乇賷丞"
+msgid "Network Configuration"
+msgstr "丕毓丿丕丿丕鬲 丕賱卮亘賰丞"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"賱賯丿 賯乇乇鬲 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓 毓賱賶 鬲噩夭卅丞.\n"
-"賴匕丕 賷毓賳賷 兀賳賴 賱丿賷賰 賲丨賲賾賱 廿賯賱丕毓 毓賱賶 丕賱賯乇氐 丕賱匕賷 鬲爻鬲禺丿賲賴 賱賱廿賯賱丕毓 (賲孬丕賱: System "
-"Commander).\n"
-"\n"
-"毓賱賶 兀賷 賯乇氐 鬲賯賵賲 亘丕賱廿賯賱丕毓責"
+"亘乇賵鬲賵賰賵賱 賱亘賯賷丞 丕賱毓丕賱賲\n"
+"賱丕 D-Channel (禺胤賵胤 賲丐噩乇丞)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "丕賳卮丕亍 賯乇氐 丕賱廿賯賱丕毓..."
+msgid "Option %s must be a number!"
+msgstr "丕賱禺賷丕乇 %s 賷噩亘 兀賳 賷賰賵賳 乇賯賲丕賸!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "兀丿禺賱 賯乇氐 賲乇賳 賮賷 %s"
+msgid "Notice"
+msgstr "賲賱丕丨馗丞"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "丕禺鬲乇 爻賵丕賯丞 丕賱兀賯乇丕氐 丕賱賲乇賳丞 丕賱鬲賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕 賱毓賲賱 賯乇氐 丕賱廿賯賱丕毓"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "爻賵丕賯丞 丕賱賯乇氐 丕賱賲乇賳 丕賱孬丕賳賷丞"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "爻賵丕賯丞 丕賱賯乇氐 丕賱賲乇賳 丕賱兀賵賱賶"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "賱賲 鬲賯賲 亘鬲賴賷卅丞 禺丕丿賲 X. 賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 鬲乇賷丿 匕賱賰責"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "丌爻賮 , 賱丕 賲丿禺賱 賲乇賳 賲鬲丕丨"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"丕毓丿丕丿 丕賱胤丕亘毓丞 爻賷毓賲賱 亘卮賰賱 丌賱賷. 丕匕丕 賱賲 賷鬲賲 丕賰鬲卮丕賮 胤丕亘毓鬲賰 亘丕賱卮賰賱 丕賱氐丨賷丨 兀賵 丕匕丕 "
+"賰賳鬲 鬲賮囟賱 丕毓丿丕丿 賲禺氐氐 卮睾賾賱 \"鬲賴賷卅丞 賷丿賵賷丞\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "兀賷 賳賵毓 賲賳 丕賱鬲噩夭卅丞責"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"賯乇氐 丕賯賱丕毓 賲禺氐氐 賷賵賮乇 胤乇賷賯丞 賱賱賵氐賵賱 丕賱賶 賳馗丕賲 賱賷賳賰爻 丕賱禺丕氐 亘賰 丿賵賳\n"
-"丕賱廿毓鬲賲丕丿 毓賱賶 賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱廿毓鬲賷丕丿賷. 賴匕丕 賲賮賷丿 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 鬲孬亘賷鬲\n"
-"LILO (兀賵 grub) 毓賱賶 賳馗丕賲賰, 兀賵 丕匕丕 兀夭丕賱 賳馗丕賲 鬲卮睾賷賱 丌禺乇 LILO, 兀賵 丕匕丕 賱賲 賷鬲賵丕賮賯 "
-"LILO\n"
-"賲毓 鬲賴賷卅丞 賳馗丕賲賰. 賷賲賰賳 賰匕賱賰 丕爻鬲禺丿丕賲 賯乇氐 丕賯賱丕毓 賲禺氐氐 賲毓\n"
-"Mandrake rescue image, 賲賲丕 賷噩毓賱 丕賱賲毓丕賱噩丞 賲賳 丕賳賴賷丕乇丕鬲 丕賱賳馗丕賲 丕賱禺胤賷乇丞 兀賰孬乇 "
-"爻賴賵賱丞.\n"
-"賴賱 鬲乇賷丿 毓賲賱 賯乇氐 丕賯賱丕毓 賱賳馗丕賲賰責\n"
-"%s"
+"賯丕卅賲丞 丕賱賲賱賮丕鬲 丕賱賲乇爻賱丞 賲賳 FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "丕賱賵丕噩賴丞"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"options description:\n"
+"\n"
+" - Backup system files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User files: \n"
+"\n"
+"\tThis option allows you select all users that you want \n"
+"\tto backup.\n"
+"\tTo preserve disk space, it is recommended that you \n"
+"\tdo not include the web browser's cache.\n"
+"\n"
+" - Backup Other files: \n"
+"\n"
+"\tThis option allows you to add more data to save.\n"
+"\tWith the other backup it's not possible at the \n"
+"\tmoment to select incremental backup.\t\t\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful \n"
+"\toption for backup. This option allows you \n"
+"\tto backup all your data the first time, and \n"
+"\tonly the changed data afterward.\n"
+"\tThen you will be able, during the restore\n"
+"\tstep, to restore your data from a specified\n"
+"\tdate.\n"
+"\tIf you have not selected this option all\n"
+"\told backups are deleted before each backup. \n"
"\n"
"\n"
-"(鬲丨匕賷乇! 兀賳鬲 鬲爻鬲禺丿賲 XFS 賱賱鬲噩夭卅丞 丕賱噩匕乇賷丞,\n"
-"毓賲賱 賯乇氐 賲乇賳 賱賱廿賯賱丕毓 賯丿 賷賮卮賱 毓賱賶 丕賱兀乇噩丨,\n"
-"賱兀賳 XFS 賷丨鬲丕噩 丕賱賶 賲卮睾賱 賰亘賷乇 丕賱丨噩賲)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"賯乇氐 丕賯賱丕毓 賲禺氐氐 賷賵賮乇 胤乇賷賯丞 賱賱賵氐賵賱 丕賱賶 賳馗丕賲 賱賷賳賰爻 丕賱禺丕氐 亘賰 丿賵賳\n"
-"丕賱廿毓鬲賲丕丿 毓賱賶 賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱廿毓鬲賷丕丿賷. 賴匕丕 賲賮賷丿 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 鬲孬亘賷鬲\n"
-"SILO 毓賱賶 賳馗丕賲賰, 兀賵 丕匕丕 兀夭丕賱 賳馗丕賲 鬲卮睾賷賱 丌禺乇 LILO, 兀賵 丕匕丕 賱賲 賷鬲賵丕賮賯 SILO\n"
-"賲毓 鬲賴賷卅丞 賳馗丕賲賰. 賷賲賰賳 賰匕賱賰 丕爻鬲禺丿丕賲 賯乇氐 丕賯賱丕毓 賲禺氐氐 賲毓\n"
-"Mandrake rescue image, 賲賲丕 賷噩毓賱 丕賱賲毓丕賱噩丞 賲賳 丕賳賴賷丕乇丕鬲 丕賱賳馗丕賲 丕賱禺胤賷乇丞 兀賰孬乇 "
-"爻賴賵賱丞.\n"
-"丕匕丕 賰賳鬲 鬲乇賷丿 丕賳卮丕亍 賯乇氐 丕賯賱丕毓 賱賳馗丕賲賰, 兀丿禺賱 賯乇氐 賲乇賳 賮賷 丕賱爻賵丕賯丞\n"
-"丕賱兀賵賱賶 賵 丕囟睾胤 \"賲賵丕賮賯\"."
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "賷賲賰賳賰 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓 毓賱賶 丕賱鬲噩夭卅丞 %s\n"
+msgid "comma separated strings"
+msgstr "丨乇賮賷丕鬲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "賱丕 鬲賵噩丿 賲爻丕丨賵 賰丕賮賷丞 賮賷 /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "鬲賵噩丿 賲丕賰賷賳丕鬲 賷賲賰賳 丕爻鬲禺丿丕賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 賲賳賴丕:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+msgid "Messages"
+msgstr "丕賱乇爻丕卅賱"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "睾賷乇 賲毓乇賵賮|CPH06X (bt878) [賲氐賳毓賵賳 賰孬賷乇賵賳]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+msgid "POP and IMAP Server"
+msgstr "禺丕丿賲 POP 賵 IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+msgid "Mexico"
+msgstr "丕賱賲賰爻賷賰"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+msgid "Model stepping"
+msgstr "Model stepping"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "乇賵丕賳丿丕"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "賴賱 賱丿賷賰 兀賷 賵丕噩賴丕鬲 %s責"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO 賲毓 賯丕卅賲丞 賳氐賷丞"
+msgid "Switzerland"
+msgstr "丕賱爻賵賷爻乇賷丞"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO 賲毓 賯丕卅賲丞 乇爻賵賲賷丞"
+msgid "Brunei Darussalam"
+msgstr "爻賱胤賳丞 亘乇賵賳丕賷"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 lpd 丕賱亘毓賷丿"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper missing"
+msgid "Configure Internet Access..."
+msgstr "廿毓丿丕丿 丕賱丿禺賵賱 丕賱賶 丕賱廿賳鬲乇賳鬲..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu missing"
+msgid "Norway"
+msgstr "丕賱賳乇賵賷噩"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "爻鬲賰賵賳 賱賯胤丕鬲 丕賱卮丕卮丞 賲賵噩賵丿丞 亘毓丿 丕賱鬲孬亘賷鬲 賮賷 %s"
+msgid "Danish"
+msgstr "丕賱丿賳賲丕乇賰賷丞"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "賱丕 賷賲賰賳賳賷 睾賲賱 賱賯胤丕鬲 賱賱卮丕卮丞 賯亘賱 丕賱鬲噩夭卅丞"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"鬲賯賵賲 亘鬲卮睾賷賱 賲賮鬲丕丨 numlock 丌賱賷丕賸 賮賷 爻胤乇 丕賱兀賵丕賲乇\n"
+"賵 XFree 毓賳丿 丕賱廿賯賱丕毓."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d 孬賵丕賳"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 鬲賴賷卅丞 IP 丕賱禺丕氐丞 亘賴匕賴 丕賱賲丕賰賷賳丞.\n"
+"賰賱 賲丕丿丞 賷噩亘 丕丿禺丕賱賴丕 賰毓賳賵丕賳 IP 亘卮賰賱 賲賳賯賵胤\n"
+"(賲孬賱丕賸, 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "丿賯賷賯丞 賵丕丨丿丞"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"鬲孬亘賷鬲 Mandrake Linux 賲賵夭毓 毓賱賶 丕賱毓丿賷丿 賲賳 丕賱兀賯乇丕氐. DrakX\n"
+"賷毓賱賲 廿匕丕 賰丕賳鬲 丨夭賲丞 賲丕 賮賷 賯乇氐 丌禺乇 賵 爻賷禺乇噩 丕賱賯乇氐\n"
+"丕賱丨丕賱賷 賵 爻賷胤賱亘 賲賳賰 兀賳 鬲丿禺賱 賯乇氐丕賸 賲禺鬲賱賮丕 賰賲丕 賴賵 賲胤賱賵亘."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d 丿賯丕卅賯"
+msgid "Processors"
+msgstr "丕賱賲毓丕賱噩丕鬲"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "鬲賷乇丕亘丕賷鬲"
+msgid "Bulgaria"
+msgstr "亘賱睾丕乇賷丕"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "睾賷睾丕亘丕賷鬲"
+msgid "No NIC selected!"
+msgstr "賱賲 賷鬲賲 丕禺鬲賷丕乇 NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "賲賷睾丕亘丕賷鬲"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "噩夭乇 爻賮丕賱亘丕乇丿 賵 噩丕賳 賲丕賷賳"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "賰賷賱賵亘丕賷鬲"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"馗賴乇鬲 賲卮丕賰賱 兀孬賳丕亍 丕賱鬲孬亘賷鬲.\n"
+"丕禺鬲亘乇 丕賱賵氐賱丞 亘丕爻鬲禺丿丕賲 net_monitor 兀賵 mcc. 丕匕丕 賱賲 鬲毓賲賱 丕賱賵氐賱丞, 賮賯丿 鬲乇賷丿 丕毓丕丿丞 "
+"丕賱鬲賴賷卅丞."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲丨丿丞"
+msgid "partition %s is now known as %s"
+msgstr "丕賱鬲噩夭卅丞 %s 賲毓乇賵賮丞 丕賱丌賳 亘丕賱廿爻賲 %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "丕賱賳賲爻丕"
+msgid "Backup Other files..."
+msgstr "丕賳爻禺 賲賱賮丕鬲 兀禺乇賶..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "廿賷胤丕賱賷丕"
+msgid "SMB server IP"
+msgstr "IP 禺丕丿賲 SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "賴賵賱賳丿丕"
+msgid "Congo (Kinshasa)"
+msgstr "丕賱賰賵賳睾賵 賰賷賳卮丕爻丕"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "丕賱爻賵賷丿"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "噩丿賵賱 丕鬲鬲賯爻賷賲 賱賱賯乇氐 %s 爻賷鬲賲 賰鬲丕亘鬲賴 丕賱賶 丕賱賯乇氐!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "丕賱賳乇賵賷噩"
+msgid "Installing HPOJ package..."
+msgstr "噩丕乇賷 鬲賴賷卅丞 丨夭賲丞 HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "丕賱賷賵賳丕賳"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"賯乇氐 丕賯賱丕毓 賲禺氐氐 賷賵賮乇 胤乇賷賯丞 賱賱賵氐賵賱 丕賱賶 賳馗丕賲 賱賷賳賰爻 丕賱禺丕氐 亘賰 丿賵賳\n"
+"丕賱廿毓鬲賲丕丿 毓賱賶 賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱廿毓鬲賷丕丿賷. 賴匕丕 賲賮賷丿 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 鬲孬亘賷鬲\n"
+"LILO (兀賵 grub) 毓賱賶 賳馗丕賲賰, 兀賵 丕匕丕 兀夭丕賱 賳馗丕賲 鬲卮睾賷賱 丌禺乇 LILO, 兀賵 丕匕丕 賱賲 賷鬲賵丕賮賯 "
+"LILO\n"
+"賲毓 鬲賴賷卅丞 賳馗丕賲賰. 賷賲賰賳 賰匕賱賰 丕爻鬲禺丿丕賲 賯乇氐 丕賯賱丕毓 賲禺氐氐 賲毓\n"
+"Mandrake rescue image, 賲賲丕 賷噩毓賱 丕賱賲毓丕賱噩丞 賲賳 丕賳賴賷丕乇丕鬲 丕賱賳馗丕賲 丕賱禺胤賷乇丞 兀賰孬乇 "
+"爻賴賵賱丞.\n"
+"賴賱 鬲乇賷丿 毓賲賱 賯乇氐 丕賯賱丕毓 賱賳馗丕賲賰責\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "兀賱賲丕賳賷丕"
+msgid ", USB printer \\#%s"
+msgstr ", 胤丕亘毓丞 USB \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "噩賲賴賵乇賷丞 丕賱鬲卮賷賰"
+msgid "Latvian"
+msgstr "丕賱賱丕鬲賮賷丞"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "亘賱噩賷賰丕"
+msgid "monthly"
+msgstr "卮賴乇賷丕"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "賮乇賳爻丕"
+msgid "Module name"
+msgstr "丕爻賲 丕賱賵丨丿丞"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "賰賵爻鬲丕乇賷賰丕"
+msgid "Start at boot"
+msgstr "丕亘丿兀 毓賳丿 丕賱廿賯賱丕毓"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "丕爻鬲禺丿賲 丕賱賳爻禺 丕賱鬲乇丕賰賲賷 (賱丕 鬲爻鬲亘丿賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賯丿賷賲丞)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr " 賮鬲丨丞 丕賱禺胤廿 %s 賱賱賰鬲丕亘丞 :%s"
+msgid "First sector of drive (MBR)"
+msgstr "丕賱賯胤丕毓 丕賱兀賵賱 賲賳 丕賱賯乇氐 (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "賱丕 卮賷卅 賱賱毓賲賱"
+msgid "Joystick"
+msgstr "毓氐丕 丕賱兀賱毓丕亘"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "賱丕 鬲賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賱賱鬲丨丿賷丿 丕賱丌賱賷"
+msgid "El Salvador"
+msgstr "丕賱爻賱賮丕丿賵乇"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 賳馗丕賲 賲賱賮丕鬲 賲乇賲賾夭 賱賳賯胤丞 丕賱鬲丨賲賷賱 %s"
+msgid "Use Unicode by default"
+msgstr "丕爻鬲禺丿賲 賷賵賳賷賰賵丿 丕賮鬲乇丕囟賷丕賸"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"鬲丨鬲丕噩 丕賱賶 賳馗丕賲 賲賱賮丕鬲 丨賯賷賯賷 (ext2/ext3, resierfs, xfs, 兀賵 jfs) 賱賳賯胤丞 丕賱鬲丨賲賷賱 "
-"賴匕賴\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "賵丨丿丞 賳賵丕丞 賱賷賳賰爻 丕賱鬲賷 鬲鬲毓丕賲賱 賲毓 賴匕丕 丕賱噩賴丕夭"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "賴匕丕 丕賱丿賱賷賱 賷噩亘 兀賳 賷賰賵賳 賮賷 賳馗丕賲 丕賱賲賱賮丕鬲 丕賱噩匕乇賷"
+msgid "Trying to rescue partition table"
+msgstr "噩丕乇賷 賲丨丕賵賱丞 丕賳賯丕匕 噩丿賵賱 丕賱鬲賯爻賷賲"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 LVM Logical Volume 賱賳賯胤丞 丕賱鬲丨賲賷賱 %s"
+msgid "Option %s must be an integer number!"
+msgstr "丕賱禺賷丕乇 %s 賷噩亘 兀賳 賷賰賵賳 乇賯賲丕 氐丨賷丨丕賸!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"賱賯丿 丕禺鬲乇鬲 鬲噩夭卅丞 RAID 亘乇賲噩賷丞 賰鬲噩夭卅丞 噩匕乇賷丞 (/).\n"
-"賱丕 賷爻鬲胤賷毓 兀賷 賲丨賲賾賱 丕賯賱丕毓 丕賱鬲毓丕賲賱 賲毓 匕賱賰 亘丿賵賳 鬲噩夭卅丞 /boot.\n"
-"賮囟賱丕賸 鬲兀賰丿 賲賳 丕囟丕賮丞 鬲噩夭卅丞 /boot"
+"Entries you'll have to fill:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "賴賳丕賰 鬲噩夭卅丞 賲毓 賳賯胤丞 丕賱鬲丨賲賷賱 %s 賲爻亘賯丕賸\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "賱賲 兀鬲賲賰賳 賲賳 亘丿亍 丕賱鬲乇賯賷丞 丕賱丨賷丞 !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "賳賯丕 丕賱鬲丨賲賷賱 賷噩亘 兀賳 鬲丨鬲賵賷 賮賯胤 毓賱賶 丕賱丨乇賵賮 賵/兀賵 丕賱丌乇賯丕賲"
+msgid "Name: "
+msgstr "丕賱丕爻賲: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "賷噩亘 兀賳 鬲亘丿兀 賳賯丕胤 丕賱鬲丨賲賷賱 亘丕賱毓賱丕賲丞 /"
+msgid "16 million colors (24 bits)"
+msgstr "16 賲賱賷賵賳 賱賵賳 (24 亘鬲)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 ReiserFS 賱賱鬲噩夭卅丕鬲 兀氐睾乇 賲賳 32 賲賷睾丕亘丕賷鬲"
+msgid "Allow all users"
+msgstr "丕爻賲丨 賱賰賱 丕賱賲爻鬲禺丿賲賷賳"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 JFS 賱賱鬲噩夭卅丕鬲 兀氐睾乇 賲賳 16 賲賷睾丕亘丕賷鬲"
+msgid "The official MandrakeSoft Store"
+msgstr "賲鬲噩乇 MandrakeSoft 丕賱乇爻賲賷"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "噩丕乇賷 鬲睾賷賷乇 丕賱丨噩賲"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "賵氐賱丞 賰賷亘賱"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "丕賱賲爻鬲禺丿賲"
#: ../../fsedit.pm:1
#, c-format
@@ -975,1001 +1783,257 @@ msgstr ""
"\n"
"賴賱 兀賳鬲 賲賵丕賮賯 毓賱賶 禺爻丕乇丞 賰賱 丕賱鬲噩夭卅丕鬲責\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "禺胤兀"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "賯賲 亘賳爻禺 丕丨鬲賷丕胤賷 噩丿賷丿 賮亘賱 丕賱廿爻鬲毓丕丿丞 (賮賯胤 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賲鬲丿乇噩丞)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "禺丕丿賲"
+msgid "Printer on parallel port \\#%s"
+msgstr "丕賱胤丕亘毓丞 毓賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "賲毓 /usr"
+msgid "Name"
+msgstr "丕賱丕爻賲"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "亘爻賷胤"
+msgid "mkraid failed"
+msgstr "賮卮賱 mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "噩丕乇賷 鬲賲賰賷賳 鬲噩夭卅丞 丕賱鬲亘丿賷賱 %s"
+msgid "Button 3 Emulation"
+msgstr "賲丨丕賰丕丞 丕賱夭乇 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "禺胤兀 賮賷 丕夭丕賱丞 鬲丨賲賷賱 %s: %s"
+msgid "Sending files..."
+msgstr "噩丕乇賷 丕乇爻丕賱 丕賱賲賱賮丕鬲..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "賮卮賱 鬲丨賲賷賱 丕賱鬲噩夭卅丞 %s 賮賷 丕賱丿賱賷賱 %s"
+msgid "Israeli (Phonetic)"
+msgstr "丕賱毓亘乇賷丞 (氐賵鬲賷丞)"
-# y, c-format
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "噩丕乇賷 鬲丨賲賷賱 丕賱鬲噩夭卅丞 %s"
+msgid "access to rpm tools"
+msgstr "丕賱賵氐賵賱 丕賱賶 兀丿賵丕鬲 rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 %s"
+msgid "edit"
+msgstr "丨乇賾乇"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "噩丕乇賷 鬲賴賷卅丞 丕賱鬲噩夭卅丞 %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "賷噩亘 毓賱賷賰 丕丿禺丕賱/丕禺鬲賷丕乇 胤丕亘毓丞/噩賴丕夭"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "噩丕乇賷 丕賳卮丕亍 賵 鬲噩賴賷夭 丕賱賲賱賮 %s"
+msgid "Permission problem accessing CD."
+msgstr "鬲賵噩丿 賲卮賰賱丞 賮賷 丕賱鬲氐乇賷丨 賱賱賵氐賵賱 丕賱賶 丕賱賯乇氐 丕賱賲丿賲噩."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "賱丕 兀毓乇賮 賰賷賮 兀噩賴夭 %s 賮賷 丕賱賳賵毓 %s"
+msgid "Phone number"
+msgstr "乇賯賲 丕賱鬲賾賱賷賮賵賳 "
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s 鬲噩賴賷夭 %s 賯丿 賮卮賱"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "禺胤兀: 賲卮睾賱 \"%s\" 賱亘胤丕賯丞 丕賱氐賵鬲 丕賱禺丕氐丞 亘賰 睾賷乇 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"丕囟睾胤 \"丕賱鬲丕賱賷 ->\" 丕匕丕 賰賳鬲 鬲乇賷丿 丨匕賮 賰賱 丕賱鬲噩夭卅丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱賯乇氐\n"
-"丕賱氐賱亘. 禺匕 丨匕乇賰, 亘毓丿 賳賯乇賰 賱夭乇 \"丕賱鬲丕賱賷 ->\" 賱賳 鬲鬲賲賰賳 賲賳 丕爻鬲毓丕丿丞\n"
-"兀賷 亘賷丕賳丕鬲 兀賵 鬲噩夭卅丕鬲 賰丕賳鬲 賲賵噩賵丿丞 毓賱賶 賴匕丕 丕賱賯乇氐 丕賱氐賱亘.\n"
-"亘賲丕 賮賷賴丕 亘賷丕賳丕鬲 Windows\n"
-"丕賳賯乇 \"<- 丕賱爻丕亘賯\" 賱廿賷賯丕賮 賴匕賴 丕賱毓賲賱賷丞 丿賵賳 禺爻丕乇丞 兀賷 亘賷丕賳丕鬲 兀賵 鬲噩夭卅丕鬲\n"
-"賲賵噩賵丿丞 毓賱賶 丕賱賯乇氐 丕賱氐賱亘."
+msgid "Printer name, description, location"
+msgstr "丕爻賲 丕賱胤丕亘毓丞, 賵氐賮, 丕賱賲賰丕賳"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"丕禺鬲乇 丕賱賯乇氐 丕賱氐賱亘 丕賱匕賷 鬲乇賷丿 賲丨賵賴 賱鬲孬亘賷鬲 鬲噩夭卅丞\n"
-"Mandrake Linux 丕賱噩丿賷丿丞. 禺匕 丨匕乇賰, 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲賵噩賵丿 毓賱賷賴 爻鬲囟賷毓\n"
-"賵 賱賳 賷賲賰賳 丕爻鬲毓丕丿鬲賴丕!"
+msgid "USA (broadcast)"
+msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲賾丨丿丞 丕賱兀賲乇賷賰賷賾丞 (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
+"乇噩丕亍 丕禺鬲乇\n"
+"賵爻賷胤 丕賱賳爻禺 丕賱丕丨鬲賷丕胤賷"
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"亘胤丕賯丞 丕賱氐賵鬲\": 丕匕丕 鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞 氐賵鬲 毓賱賶 賳馗丕賲賰, 爻賷鬲賲 毓乇囟賴丕\n"
-"賴賳丕. 丕匕丕 賱丕丨馗鬲 兀賳 亘胤丕賯丞 丕賱氐賵鬲 丕賱賲毓乇賵囟丞 賴賳丕 賱賷爻鬲 鬲賱賰 丕賱賲賵噩賵丿丞\n"
-"賮毓賱丕賸 毓賱賶 賳馗丕賲賰, 賷賲賰賳賰 丕賱賳賯乇 毓賱賶 丕賱夭乇 賵 丕禺鬲賷丕乇 賲卮睾賱\n"
-"丌禺乇."
+msgid "Use Xinerama extension"
+msgstr "丕爻鬲禺丿丕賲 丕賲鬲丿丕丿 Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"鬲毓匕乇 睾賱賯 mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"爻賷賯賵賲 DrakX 兀賵?賸 亘丕賱鬲丨賯賯 賲賳 賵噩賵丿 兀噩賴夭丞 IDE 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇. 爻賷賯賵賲\n"
-"兀賷囟丕賸 亘丕賱亘丨孬 毓賳 亘胤丕賯丕鬲 PCI SCSI 毓賱賶 賳馗丕賲賰. 丕匕丕 鬲賲 丕賷噩丕丿 亘胤丕賯丞\n"
-"SCSI,爻賷賯賵賲 DrakX 亘鬲孬亘賷鬲 丕賱賲卮睾賱 丕賱賲賳丕爻亘 兀賵鬲賵賲丕鬲賷賰賷丕賸.\n"
-"\n"
-"賵 ?賳 毓賲賱賷丞 丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿 賱賷爻鬲 禺丕賱賷丞 賲賳 丕?禺胤丕亍, 爻賷賯賵賲 DrakX 亘爻丐丕賱賰 毓賲賾丕 "
-"丕匕丕\n"
-"賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 PCI SCSI. 丕賱賳賯乇 毓賱賶 \"賳毓賲\" 爻賷毓乇囟 賯丕卅賲丞 亘亘胤丕賯丕鬲 SCSI\n"
-"賱鬲禺鬲丕乇 賲賳賴丕. 丕賳賯乇 \"?\" 丕匕丕 賰賳鬲 鬲毓賱賲 兀賳賴 ? 鬲賵噩丿 亘胤丕賯丕鬲 SCSI 毓賱賶\n"
-"賲丕賰賷賳鬲賰. 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕賸, 賷賲賰賳賰 丕賱鬲兀賰丿 賲賳 賯丕卅賲丞 丕賱毓鬲丕丿 丕賱鬲賷 鬲賲 丕賷噩丕丿賴丕\n"
-"毓賱賶 賲丕賰賷賳鬲賰 毓賳 胤乇賷賯 丕禺鬲賷丕乇 \"毓乇囟 賲毓賱賵賲丕鬲 丕賱毓鬲丕丿\" 賵 賳賯乇\n"
-"\"丕賱鬲丕賱賷->\". 鬲兀賰丿 賲賳 賯丕卅賲丞 丕賱毓鬲丕丿 孬賲 丕囟睾胤 毓賱賶 夭乇 \"丕賱鬲丕賱賷\n"
-"->\" 賱賱毓賵丿丞 丕賱賶 卮丐丕賱 賵丕噩賴丞 SCSI.\n"
-"\n"
-"丕匕丕 丕囟胤乇乇鬲 丕賱賶 鬲丨丿賷丿 賲賵丕卅賲 PCI SCSI 賷丿賵賷丕賸, 賮爻賷爻兀賱賰 DrakX 毓賲賾丕 丕匕丕 賰賳鬲\n"
-"鬲乇賷丿 鬲賴賷卅丞 丕賱禺賷丕乇丕鬲 丕賱禺丕氐丞 亘賴丕. 賷噩亘 兀賳 鬲爻賲丨 賱賭 DrakX 亘兀賳 賷鬲丨賯賯 賲賳\n"
-"丕賱毓鬲丕丿 賱賱禺賷丕乇丕鬲 丕賱禺丕氐丞 亘丕賱亘胤丕賯丞 賵 丕賱鬲賷 賷賹購丨鬲丕噩 丕賱賷賴丕 賱賷鬲賲 亘丿亍\n"
-"毓賲賱 丕賱亘胤丕賯丞. 賮賷 兀睾賱亘 丕?賵賯丕鬲, 爻賷賯賵賲 DrakX 亘丕賱禺胤賵丞 丿賵賳 兀賷\n"
-"賲卮丕賰賱.\n"
-"\n"
-"丕匕丕 賱賲 賷鬲賲賰賳 DrakX 賲賳 丕賱鬲毓乇賮 毓賱賶 丕賱禺賷丕乇丕鬲 丕賱囟乇賵乇賷丞賱鬲賲乇賷乇賴丕\n"
-"丕賱賶 丕賱毓鬲丕丿, 賮賮賷 賴匕賴 丕賱丨丕賱 爻鬲丨鬲丕噩 丕賱賶 鬲賴賷卅丞\n"
-"丕賱賲卮睾賾賱 賷丿賵賷丕賸."
+msgid "West Europe"
+msgstr "兀賵乇賵亘賾丕 丕賱睾乇亘賷賾丞"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"丕?賳, 丨丕賳 賵賯鬲 丕禺鬲賷丕乇 賳馗丕賲 丕賱胤亘丕毓丞 賱賳馗丕賲賰. 鬲賵賮乇 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶\n"
-"賳馗丕賲 胤亘丕毓丞 賵丕丨丿, 賱賰賳 Mandrake Linux 賷賵賮乇 賱賰 賳馗丕賲賷賳. 賰賱 賳馗丕賲 賲賳丕爻亘\n"
-"賱賳賵睾 賲毓賷賳 賲賳 丕賱鬲賴賷卅丞.\n"
-"\n"
-" * \"pdq\"--賵 賴賵 丕禺鬲氐丕乇 賱賭``print, don't queue'' 兀賷 ``丕胤亘毓 賵 ? 鬲氐賮'', 賴匕丕 賴賵 "
-"丕賱禺賷丕乇 丕?賲孬賱\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 賵氐賱丞 賲亘丕卮乇丞 亘丕賱胤丕亘毓丞, 賵 鬲乇賷丿 鬲賮丕丿賷 兀賷 丕乇鬲亘丕賰 賮賷 丕賱胤丕亘毓丞\n"
-"賵 賱丿賷賰 胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰丞.(賷賯賵賲 \"pdq\" 亘丕賱鬲毓丕賲賱 賲毓 丨丕?鬲 丕賱卮亘賰丞 丕賱亘爻賷胤丞\n"
-"賵 賷毓賷亘賴 丕賱亘胤卅 毓賳丿 丕?爻鬲禺丿丕賲 賲毓 丕賱卮亘賰丕鬲). 賲賳 丕?賮囟賱 兀賳 鬲爻鬲禺丿賲 \"pdq\" 丕匕丕.\n"
-"賰丕賳鬲 賴匕賴 鬲噩乇亘鬲賰 丕?賵賱賶 賲毓 賳馗丕賲 賱賷賳賰爻.\n"
-"\n"
-" * \"CUPS\" - ``Common UNIX Printing System'', 賴賵 丕賱禺賷丕乇 丕?賲孬賱\n"
-"賱賱胤亘丕毓丞 毓賱賶 胤丕亘毓鬲賰 丕賱賲丨賱賷丞 兀賵 丨鬲賶 毓賱賶 胤丕亘毓丞 賮賷 丕賱賳氐賮 丕?禺乇 賲賳 丕賱賰賵賰亘. 丕賳賴\n"
-"爻賴賱 丕?毓丿丕丿 賵 賷賲賰賳 兀賳 賷鬲氐乇賮 賰禺丕丿賲 兀賵 賰毓賲賷賱 ?賳馗賲丞 胤亘丕毓丞 \"lpd\"\n"
-"丕賱賯丿賷賲丞, 賱匕丕 賮廿賳賴 賲鬲賵丕賮賯 賲毓 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕賱賯丿賷賲丞\n"
-"丕賱鬲賷 ? 鬲夭丕賱 鬲丨鬲丕噩 丕賱賶 禺丿賲丕鬲 丕賱胤亘丕毓丞.亘賷賳賲丕 丕賱鬲賴賷卅丞 爻賴賱丞\n"
-"賵 賯賵賷丞 賲孬賱 \"pdq\". 丕匕丕 賰賳鬲 鬲丨鬲丕噩 丕賱賶 賲丨丕賰丕丞 禺丕丿賲 \"lpd\", 鬲兀賰丿\n"
-"賲賳 鬲卮睾賷賱 賲乇丕賯亘 \"cups-lpd\". 賷丨鬲賵賷 CUPS 毓賱賶 賵丕噩賴丕鬲\n"
-"乇爻賵賲賷丞 賱賱胤亘丕毓丞 兀賵 丕禺鬲賷丕乇 禺賷丕乇丕鬲 丕賱胤丕亘毓丞 賵 廿丿丕乇丞\n"
-"丕賱胤丕亘毓丞.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"丕匕丕 賯賲鬲 賷鬲賯乇賷乇 丕禺鬲賷丕乇賰 丕?賳, 孬賲 賱賲 賷毓噩亘賰 賳馗丕賲 丕賱胤亘丕毓丞\n"
-"賮賷賲丕 亘毓丿, 賷賲賰賳賰 鬲睾賷賷乇賴 毓賳 胤乇賷賯 鬲卮睾賷賱 PrinterDrake 賲賳 賲乇賰夭 鬲丨賰賲 Mandrake\n"
-"賵 丕賱賳賯乇 毓賱賶 夭乇 丕賱禺亘賷乇."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 丕賱廿氐丿丕乇 %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"亘毓丿賲丕 賯賲鬲 亘鬲賴賷卅丞 丕賱賲毓丕賲?鬲 丕賱毓丕賲丞 賱賲丨賲賾賱 丕?賯賱丕毓, 賮爻賷鬲賲\n"
-"毓乇囟 賯丕卅賲丞 禺賷丕乇丕鬲 丕?賯賱丕毓 丕賱賲鬲賵賮乇丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱.\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賴賳丕賰 兀賳馗賲丞 鬲卮睾賷賱 兀禺乇賶 賲孬亘鬲丞 毓賱賶 賲丕賰賷賳鬲賰 賮爻賷鬲賲 丕囟丕賮鬲賴丕\n"
-"丌賱賷丕賸 丕賱賶 賯丕卅賲丞 丕?賯賱丕毓. 賷賲賰賳賰 丕賱鬲丨賰賲 亘丕賱禺賷丕乇丕鬲\n"
-"丕賱賲賵噩賵丿丞 亘賳賯乇 \"丕囟賮\" ?賳卮丕亍 賲丿禺賱 噩丿賷丿, 賵 丕禺鬲賷丕乇 賲丿禺賱 賵\n"
-"賳賯乇 \"鬲毓丿賷賱\" 兀賵 \"丨匕賮\" 賱鬲毓丿賷賱 兀賵 丨匕賮 丕賱賲丿禺賱. \"賲賵丕賮賯\" 賷鬲兀賰丿\n"
-"賲賳 鬲睾賷賷乇丕鬲賰.\n"
-"\n"
-"乇亘賲丕 ? 鬲乇賷丿 ?賷 卮禺氐 賷鬲賲賰賳 賲賳 丕毓丕丿丞 鬲卮睾賷賱 丕賱賲丕賰賷賳丞 兀賳 賷爻鬲胤賷毓\n"
-"丕賱賵氐賱 丕賱賶 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶. 賷賲賰賳賰 丨匕賮 丕賱賲丿丕禺賱 丕賱賲賯丕亘賱丞\n"
-"?賳馗賲丞 丕賱鬲卮睾賷賱 賱丨匕賮賴丕 賲賳 賯丕卅賲丞 賲丨賲賾賱 丕?賯賱丕毓, 賱賰賳 賮賷 賴匕賴 丕賱丨丕賱丞 爻鬲丨鬲丕噩 丕賱賶 賯乇氐\n"
-"賲乇賳 賱賱廿賯?毓 賰賷 鬲鬲賲賰賳 賲賳 丕賱賵氐賵賱 丕賱賶 兀賳馗賲丞\n"
-"丕賱鬲卮睾賷賱 丕?禺乇賶!"
+msgid "Copying %s"
+msgstr "噩丕乇賷 賳爻禺 %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "廿禺鬲乇 丕賱賱賵賳"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"賴匕賴 賴賷 兀賴賲 禺胤賵丞 鬲鬲禺匕賴丕 ?賲賳 賳馗丕賲 賱賷賳賰爻 丕賱禺丕氐\n"
-"亘賰: 毓賱賷賰 丕丿禺丕賱 賰賱賲丞 賲乇賵乇 丕賱賲爻鬲禺丿賲 \"丕賱噩匕乇\" (root) 賵 賴賵\n"
-"賲丿賷乇 丕賱賳馗丕賲 賵 丕賱賲爻鬲禺丿賲 丕賱賵丨賷丿 丕賱賲禺賵賱 亘鬲丨丿賷孬 丕賱賳馗丕賲, 丕囟丕賮丞 丕賱賲爻鬲禺丿賲賷賳,\n"
-"鬲睾賷賷乇 鬲賴賷卅丞 丕賱賳馗丕賲, 丕賱禺. 亘丕禺鬲氐丕乇 賷賲賰賳 賱賱賲爻鬲禺丿賲 \"丕賱噩匕乇\" 兀賳 賷賮毓賱\n"
-"賰賱 卮卅! 賱匕丕 毓賱賷賰 丕禺鬲賷丕乇 賰賱賲丞 丕賱賲乇賵乇 氐毓亘丞\n"
-"丕賱鬲禺賲賷賳 - 爻賷禺亘乇賰 DrakX 丕匕丕 賰丕賳鬲 賰賱賲丞 丕賱賲乇賵乇 丕賱鬲賷 鬲爻鬲禺丿賲賴丕 爻賴賱丞. 賰賲丕\n"
-"鬲乇賶, 賱爻鬲 賲噩亘乇丕賸 毓賱賶 丕丿禺丕賱 賰賱賲丞 賲乇賵乇, 賱賰賳賳丕 賳賳氐丨 亘卮丿丞 ?賳 丕丨鬲賲丕賱 丨丿賵孬\n"
-"兀禺胤丕亍 賲毓 賱賷賳賰爻 毓丕丿賷 賲孬賱 亘丕賯賷 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶. 賵 亘賲丕 兀賳 \"丕賱噩匕乇\" 賷賲賰賳賴\n"
-"鬲毓丿賷 賰賱 丕賱丨丿賵丿 賵 賯丿 賷丨匕賮 賰賱 丕賱亘賷丕賳丕鬲 賲賳 丿賵賳 賯氐丿, 賱匕丕 賮賷噩亘 兀賳 賷賰賵賳 賲賳\n"
-"丕賱氐毓亘 兀賳 鬲氐亘丨 丕賱賲爻鬲禺丿賲 \"丕賱噩匕乇\".\n"
-"\n"
-"賷噩亘 兀賳 鬲賰賵賳 賰賱賲丞 丕賱賲乇賵乇 禺賱賷胤丕賸 賲賳 丕賱丨乇賵賮 賵 丕?乇賯丕賲 賰賲丕 賷噩亘 兀賳 鬲丨鬲賵賷\n"
-"毓賱賶 8 丨乇賵賮 毓賱賶 丕?賯賱. ? 鬲賰鬲亘 賰賱賲丞 賲乇賵乇 \"丕賱噩匕乇\" 毓賱賶 賵乇賯 -- 賴匕丕 賷爻賴賾賱\n"
-"丕禺鬲乇丕賯 丕賱賳馗丕賲 丕匕丕 乇兀賶 兀丨丿 賰賱賲丞 丕賱賲乇賵乇.\n"
-"\n"
-"賳氐賷丨丞 兀禺乇賶 -- ? 鬲噩毓賱 賰賱賲丞 丕賱賲乇賵乇 胤賵賷賱丞 噩丿丕賸 兀賵 賲毓賯賾丿丞 ?賳賰 賷噩亘 兀賳 鬲賰賵賳\n"
-"賯丕丿乇丕賸 毓賱賶 鬲匕賰乇賴丕!\n"
-"\n"
-"賱賳 賷鬲賲 毓乇囟 賰賱賲丞 丕賱賲乇賵乇 毓賱賶 丕賱卮丕卮丞. 賱鬲賯賱賷賱 賮乇氐丞 丨丿賵孬\n"
-"禺胤兀 兀孬賳丕亍 丕賱賰鬲丕亘丞, 爻鬲丨鬲丕噩 丕賱賶 丕丿禺丕賱 賰賱賲丞 丕賱賲乇賵乇 賲乇鬲賷賳.\n"
-"丕匕丕 兀禺胤兀鬲 賮賷 丕賱賰鬲丕亘丞 賮賷 丕賱賲乇鬲賷賳, 賮爻賷噩亘 丕爻鬲禺丿丕賲 賰賱賲丞\n"
-"丕賱賲乇賵乇 \"丕賱禺丕胤卅丞\" 賮賷 丕賱賲乇丞 丕?賵賱賶 丕賱鬲賷 鬲丿禺賱 賮賷賴丕 丕賱賶 丕賱賳馗丕賲.\n"
-"\n"
-"丕匕丕 賰賳鬲 鬲乇賷丿 丕賱賵氐賵賱 丕賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇 賱賰賷 賷鬲賲 丕賱鬲丨賰賲 亘賰 毓賳 胤乇賷賯\n"
-"禺丕丿賲 賲氐丕丿賯丞, 丕囟睾胤 夭乇 \"賲鬲賯丿賲\".\n"
-"\n"
-"丕匕丕 賰丕賳鬲 卮亘賰鬲賰 鬲爻鬲禺丿賲 LDAP, NIS, 兀賵 PDC Windows Domain Authentication "
-"Services\n"
-"毓賱賷賰 丕禺鬲賷丕乇 丕賱禺賷丕乇 丕賱賲賳丕爻亘 賰賭\"賲氐丕丿賯丞\". 丕匕丕 賱賲 鬲毓賱賲 兀賷 賲賳賴丕 鬲乇賷丿\n"
-"丕爻鬲禺丿丕賲賴, 丕爻兀賱 賲丿賷乇 丕賱卮亘賰丞 賱丿賷賰.\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 賲卮賰賱丞 賮賷 鬲匕賰乇 賰賱賲丕鬲 丕賱賲乇賵乇, 賷賲賰賳賰 丕禺鬲賷丕乇\n"
-"\"? 賰賱賲丞 賲乇賵乇\" 丕匕丕 賱賲 賷賰賳 丕賱賰賲亘賷賵鬲乇 丕賱禺丕氐 亘賰 賲鬲氐賱丕賸 亘丕?賳鬲乇賳鬲,\n"
-"兀賵 兀賳賰 鬲孬賯 賮賷 丕賱賱匕賷賳 賷丿禺賱賵賳 丕賱賶 丕賱賳馗丕賲."
+msgid "Dominican Republic"
+msgstr "噩賲賴賵乇賷丞 丕賱丿賵賲賷賳賷賰丕賳"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"賮囟賱丕賸 丕禺鬲乇 丕賱賲賳賮匕 丕賱氐丨賷丨. 賲孬賱丕賸 賱賲賳賮匕 \"COM1\" 賮賷\n"
-"Windows 丕爻賲賴 \"ttys0\" 賮賷 賱賷賳賰爻."
+msgid "Swaziland"
+msgstr "爻賵丕夭賷賱丕賳丿"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"丕禺鬲賷丕乇賰 賱賱睾丞 丕賱賲賮囟賱丞 爻賷丐孬乇 毓賱賶 賱睾丞 賵孬丕卅賯 丕賱賲爻丕毓丿丞\n"
-"賵 亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 賵 丕賱賳馗丕賲 亘卮賰賱 毓丕賲. 兀賵?賸 丕禺鬲乇 丕賱賲賳胤賯丞 丕賱鬲賷\n"
-"鬲鬲賵丕噩丿 賮賷賴丕, 孬賲 丕賱賱睾丞 丕賱鬲賷 鬲鬲丨丿孬 亘賴丕.\n"
-"\n"
-"囟睾胤 夭乇 \"賲鬲賯丿賲\" 爻賷爻賲丨 賱賰 亘丕禺鬲賷丕乇 賱睾丕鬲\n"
-"兀禺乇賶 賱賷鬲賲 鬲孬亘賷鬲賴丕 毓賱賶 賲丨胤丞 丕賱毓賲賱 丕賱禺丕氐丞 亘賰,賵 賲賳 孬賲\n"
-"鬲孬亘賷鬲 丕賱賲賱賮丕鬲 丕賱禺丕氐丞 亘丕賱賱睾丕鬲 賱賵孬丕卅賯 丕賱賲爻丕毓丿丞 賵 丕賱鬲胤亘賷賯丕鬲, 賲孬賱丕賸\n"
-"丕匕丕 賰賳鬲 爻鬲爻鬲囟賷賮 賲爻鬲禺丿賲賷賳 賲賳 兀爻亘丕賳賷丕 毓賱賶 賲丕賰賷賳鬲賰, 丕禺鬲乇 丕?賳噩賱賷夭賷丞\n"
-"賰賱睾丞 丕賮鬲乇丕囟賷丞 賮賷 丕賱賳賲胤 丕賱卮噩乇賷 賵 \"丕?爻亘丕賳賷丞\" 賮賷 丕賱賯爻賲\n"
-"丕賱賲鬲賯丿賲.\n"
-"?丨馗 兀賳賰 賱爻鬲 賲賯賷丿丕賸 亘丕禺鬲賷丕乇 賱睾丞 賵丕丨丿丞 丕囟丕賮賷丞. 丨丕賱\n"
-"丕禺鬲賷丕乇賰 賱賱廿毓丿丕丿丕鬲 丕賱賲丨賱賷丞, 丕囟睾胤 夭乇 \"丕賱鬲丕賱賷 ->\"\n"
-"賱賱賲鬲丕亘毓丞.\n"
-"\n"
-"賱賱鬲睾賷賷乇 亘賷賳 丕賱賱睾丕鬲 丕賱賲鬲毓丿丿丞 丕賱賲孬亘鬲丞 毓賱賶 丕賱賳馗丕賲, 賷賲賰賳賰\n"
-"鬲卮睾賷賱 丕?賲乇 \"/usr/sbin/localedrake\"賰賲爻鬲禺丿賲 噩匕乇 賱鬲睾賷賷乇\n"
-"丕賱賱睾丞 丕賱賲爻鬲禺丿賲丞 毓賳 胤乇賷賯 丕賱賳馗丕賲 賰賰賱. 鬲卮睾賷賱 丕?賲乇 賰賲爻鬲禺丿賲 毓丕丿賷\n"
-"爻賷睾賷乇 賮賯胤 丕毓丿丕丿丕鬲 丕賱賱睾丞 賱賴匕丕 丕賱賲爻鬲禺丿賲 賮賯胤."
+msgid "Please check if you are using CDRW media"
+msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 賵爻賷胤 CDRW"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"丕毓鬲賲丕丿丕賸 毓賱賶 丕賱賱睾丞 丕?賮鬲乇丕囟賷丞 丕賱鬲賷 丕禺鬲乇鬲賴丕 賮賷 賴匕丕 丕賱賯爻賲, 爻賷賯賵賲 DrakX\n"
-"亘丕禺鬲賷丕乇 鬲賴賷卅丞 賱賵丨丞 丕賱賲賮丕鬲賷丨 丌賱賷丕賸. 毓賲賵賲丕賸,\n"
-"乇亘賲丕 賱賷爻鬲 賱丿賷賰 賱賵丨丞 賲賮丕鬲賷丨 賲賯丕亘賱丞 亘卮賰賱 賲亘丕卮乇 賱賱睾鬲賰:\n"
-"賲孬賱丕賸 乇亘賲丕 鬲賰賵賳 毓乇亘賷丕賸 賲鬲賰賱賲丕賸 亘丕賱賱睾丞 丕?賳噩賱賷夭賷丞, 乇亘賲丕 鬲賰賵賳 賱丿賷賰\n"
-"賱賵丨丞 賲賮丕鬲賷丨 爻賵賷爻乇賷丞. 丕匕丕 賰賳鬲 鬲鬲賰賱賲 丕?賳噩賱賷夭賷丞 賱賰賳 賲賵噩賵丿 賮賷 賰賷亘賰, 乇亘賲丕\n"
-"鬲噩丿 賳賮爻賰 賮賷 賳賮爻 丕賱賲賵賯賮 丨賷孬 ? 鬲鬲胤丕亘賯 賱睾鬲賰 賲毓 賱賵丨丞 丕賱賲賮丕鬲賷丨.\n"
-"賮賷 丕賱丨丕賱鬲賷賳, 爻鬲爻賲丨 賱賰 禺胤賵丞 丕賱鬲孬亘賷鬲 爻鬲爻賲丨 賱賰 亘丕禺鬲賷丕乇\n"
-"賱賵丨丞 賲賮丕鬲賷丨 賲賳丕爻亘丞 賲賳 丕賱賯丕卅賲丞.\n"
-"\n"
-"丕賳賯乇 夭乇 \"丕賱賲夭賷丿\" 賱毓乇囟 賯丕卅賲丞 亘賰賱 賱賵丨丕鬲 丕賱賲賮丕鬲賷丨\n"
-"丕賱賲丿毓賵賲丞.\n"
-"\n"
-"丕匕丕 丕禺鬲乇鬲 賱賵丨丞 賲賮丕鬲賷丨 賱丨乇賵賮 睾賷乇 ?鬲賷賳賷丞, 賮爻賷爻賲丨 賱賰\n"
-"賲乇亘毓 丕賱丨賵丕乇 丕賱鬲丕賱賷 亘丕禺鬲賷丕乇 丕禺鬲氐丕乇丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲賷\n"
-"爻鬲睾賷乇 賵囟毓 賱賵丨丞 丕賱賲賮丕鬲賷丨 亘賷賳 丕賱丨乇賵賮 丕賱賱丕鬲賷賳賷丞 賵 丕賱睾賷乇 ?鬲賷賳賷丞."
+"丕禺鬲乇 丕賱賯乇氐 丕賱氐賱亘 丕賱匕賷 鬲乇賷丿 賲丨賵賴 賱鬲孬亘賷鬲 鬲噩夭卅丞\n"
+"Mandrake Linux 丕賱噩丿賷丿丞. 禺匕 丨匕乇賰, 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲賵噩賵丿 毓賱賷賴 爻鬲囟賷毓\n"
+"賵 賱賳 賷賲賰賳 丕爻鬲毓丕丿鬲賴丕!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"賷鬲賲 鬲賳卮賷胤 賴匕賴 丕賱禺胤賵丞 賮賯胤 丕匕丕 鬲賲 丕賷噩丕丿 鬲噩夭卅丞 賱賷賳賰爻 賯丿賷賲丞\n"
-"毓賱賶 噩賴丕夭賰.\n"
-"\n"
-"賷丨鬲丕噩 DrakX 丕?賳 丕賱賶 兀賳 賷毓賱賲 丕匕丕 賰賳鬲 鬲乇賷丿 丕賱鬲孬亘賷鬲 賲賳 丕賱氐賮乇 兀賵\n"
-"鬲乇賷丿 鬲乇賯賷丞 賳馗丕賲 Mandrake Linux 丕賱賲賵噩賵丿 賱丿賷賰 賲爻亘賯丕賸:\n"
-"\n"
-" * \"鬲孬亘賷鬲\": 賮賷 丕?睾賱亘 鬲賯賵賲 亘丕夭丕賱丞 丕賱賳馗丕賲 丕賱賯丿賷賲\n"
-"賰賱賷丕賸. 丕匕丕 賰賳鬲 鬲乇賷丿 鬲睾賷賷乇 鬲噩夭卅丕鬲 丕賱賯乇氐 丕賱氐賱亘, 兀賵 鬲乇賷丿\n"
-"鬲睾賷賷乇 賳馗丕賲 丕賱賲賱賮丕鬲, 毓賱賷賰 丕禺鬲賷丕乇 賴匕丕 丕賱禺賷丕乇. 毓賲賵賲丕賸 丕毓鬲賲丕丿丕\n"
-"毓賱賶 賰賷賮賷丞 鬲噩夭卅丞 丕賱賯乇氐 丕賱氐賱亘 賱丿賷賰. 賷賲賰賳賰 賲賳毓 丕夭丕賱丞 亘毓囟\n"
-"亘賷丕賳丕鬲賰 丕賱賲賵噩賵丿丞 賲爻亘賯丕賸.\n"
-" * \"鬲乇賯賷丞\": 賮卅丞 丕賱鬲孬亘賷鬲 賴匕賴 鬲爻賲丨 賱賰 亘鬲丨丿賷孬 丕賱丨夭賲\n"
-"毓賱賶 賳馗丕賲 Mandrake Linux 丕賱禺丕氐 亘賰. 賱賳 賷鬲賲 鬲睾賷賷乇\n"
-"亘賷丕賳丕鬲賰 兀賵 鬲賯爻賷賲丕鬲 丕賱賯乇氐 丕賱氐賱亘. 兀睾賱亘 禺胤賵丕鬲 丕賱鬲賴賷卅丞 丕?禺乇賶\n"
-"賱丕 鬲夭丕賱 賲賵噩賵丿丞, 賲孬賱 丕賱鬲孬亘賷鬲 丕賱丕毓鬲賷丕丿賷.\n"
-"\n"
-"丕爻鬲禺丿丕賲 禺賷丕乇 ``丕賱鬲乇賯賷丞'' 賷噩亘 兀賳 賷毓賲賱 亘卮賰賱 噩賷丿 毓賱賶\n"
-"丕氐丿丕乇丕鬲 Mandrake Linux \"8.1\" 兀賵 賲丕 賮賵賯. ? 賷賳氐丨 亘丕賱鬲乇賯賷丞\n"
-"賲賳 丕氐丕丿乇丕鬲 Mandrake Linux 賯亘賱 \"8.1\"."
+msgid " on parallel port \\#%s"
+msgstr " 毓賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"丕賱亘賱丿\": 鬲兀賰丿 賲賳 丕禺鬲賷丕乇 丕賱亘賱丿 丕賱丨丕賱賷. 丕匕丕 賱賲 鬲賰賳 賮賷 賴匕丕\n"
-"丕賱亘賱丿, 丕囟睾胤 毓賱賶 夭乇 \"鬲賴賷卅丞\" 賵 丕禺鬲乇 亘賱丿丕賸 丌禺乇. 丕匕丕 賱賰 鬲賰賳\n"
-"亘賱丿賰 賮賷 丕賱賯丕卅賲丞 丕囟睾胤 夭乇 \"丕賱賲夭賷丿\" 賱廿馗賴乇 賯丕卅賲丞 賰丕賲賱丞\n"
-"亘丕賱亘賱丿丕賳."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Generic 2 Button Mouse"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "丕丨匕賮 logical volumes 兀賵賱丕賸\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"毓賳丿 賴匕賴 丕賱賳賯胤丞, 爻賷爻賲丨 賱賰 DrakX 亘丕禺鬲賷丕乇 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 丕賱匕賷 鬲乇睾亘 亘賴\n"
-"賱賴匕賴 丕賱賲丕賰賷賳丞. 亘丿賷賴賷丕賸, 賷噩亘 鬲毓賷賷賳 賲爻鬲賵賶 兀賲賳賷\n"
-"毓丕賱賺 丕匕丕 賰丕賳鬲 丕賱賲丕賰賷賳丞 鬲丨鬲賵賷 毓賱賶 賲毓賱賵賲丕鬲 賴丕賲丞, 兀賵 丕匕丕 賰丕賳鬲 丕賱賲丕賰賷賳丞\n"
-"爻鬲購爻鬲禺丿賲 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲. 丕賳 丕爻鬲禺丿丕賲 賲爻鬲賵賶 兀賲賳賷 毓丕賱賺 賷兀鬲賷\n"
-"毓丕丿丞 毓賱賶 丨爻丕亘 爻賴賵賱丞 丕賱廿爻鬲禺丿丕賲.\n"
-"\n"
-"丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕賱廿禺鬲賷丕乇, 丕丨賮馗 丕賱丕禺鬲賷丕乇 丕賱廿賮鬲乇丕囟賷."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"賮賷 丕賱賵賯鬲 丕賱匕賷 鬲賯賵賲 賮賷賴 亘鬲孬亘賷鬲 Mandrake Linux, 賯丿 賷賰賵賳 鬲賲 鬲丨丿賷孬\n"
-"亘毓囟 丕賱丨夭賲 賲賳匕 丕?氐丿丕乇 丕賱賲亘丿卅賷, 乇亘賲丕 賷賰賵賳 鬲賲 丕氐賱丕丨 亘毓囟 丕賱毓賷賵亘\n"
-"兀賵 鬲賲 丨賱 丕賱賲卮丕賰賱 丕?賲賳賷丞. 賱賰賷 鬲爻鬲賮賷丿 賲賳 賴匕賴 丕賱鬲丨丿賷孬丕鬲,賷賲賰賳賰\n"
-"丕?賳 鬲賳夭賷賱 賴匕賴 丕賱鬲丨丿賷孬丕鬲 毓亘乇 丕?賳鬲乇賳鬲. 丕禺鬲乇\n"
-"\"賳毓賲\" 丕匕丕 賰丕賳鬲 賱丿賷賰 賵氐賱丞 丕賳鬲乇賳鬲 毓丕賲賱丞, 兀賵 \"?\" 丕匕丕 賰賳鬲 鬲賮囟賱\n"
-"鬲孬亘賷鬲 賴匕賴 丕賱鬲丨丿賷孬丕鬲 ?丨賯丕賸.\n"
-"\n"
-"丕禺鬲賷丕乇 \"賳毓賲\" 賷毓乇囟 賯丕卅賲丞 亘丕?賲丕賰賳 丕賱鬲賷 賷賲賰賳 賲賳賴丕 丕賱丨氐賵賱\n"
-"毓賱賶 丕賱鬲丨丿賷孬丕鬲. 丕禺鬲乇 丕賱賲賰丕賳 丕賱兀賯乇亘 丕賱賷賰. 爻賷鬲賲 毓乇囟 賯丕卅賲丞 亘丕賱丨夭賲\n"
-"乇丕噩毓 丕禺鬲賷丕乇丕鬲賰, 孬賲 丕囟睾胤 \"孬亘賾鬲\" 賱鬲賳夭賷賱 賵 鬲孬亘賷鬲\n"
-"丕賱丨夭賲 丕賱賲禺鬲丕乇丞, 兀賵 \"丕賱睾丕亍\" ?丨亘丕胤 丕賱鬲丨丿賷孬."
+"鬲毓匕乇鬲 賰鬲丕亘丞 /etc/sysconfig/bootsplash\n"
+"賱賲 賷鬲賲 丕賷噩丕丿 丕賱賲賱賮."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "丕賱丿禺賵賱 丕賱賶 丕賱廿賳鬲乇賳鬲"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
+"丕賱廿丨丿丕孬賷 丕賱氐丕丿賷 賱賱氐賳丿賵賯 丕賱賳氐賷\n"
+"亘毓丿丿 丕賱丨乇賵賮"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
+"賱賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘丕賱禺賷丕乇丕鬲 丕賱賲鬲賵賮乇丞 賱賱胤丕亘毓丞 丕賱賲禺鬲丕乇丞 丕囟睾胤 毓賱賶 夭乇 \"賯丕卅賲丞 "
+"禺賷丕乇丕鬲 丕賱胤丕亘毓丞\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
+msgid "Enabling servers..."
+msgstr "噩丕乇賷 鬲賲賰賷賳 丕賱禺賵丕丿賲..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "噩丕乇賷 胤亘丕毓丞 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "賴賳丕賰 鬲噩夭卅丞 賲毓 賳賯胤丞 丕賱鬲丨賲賷賱 %s 賲爻亘賯丕賸\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -1987,51 +2051,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"賮賷 賴匕賴 丕賱賳賯胤丞, 毓賱賷賰 兀賳 鬲賯乇乇 兀賷賳 鬲乇賷丿 鬲孬亘賷鬲 賳馗丕賲\n"
"丕賱鬲卮睾賷賱 Mandrake Linux 毓賱賶 丕賱賯乇氐 丕賱氐賱亘 丕賱禺丕氐 亘賰. 丕匕丕 賰丕賳 丕賱賯乇氐 丕賱氐賱亘\n"
@@ -2092,231 +2154,138 @@ msgstr ""
"乇丕噩毓 賯爻賲 ``丕丿丕乇丞 丕賱鬲噩夭卅丕鬲'' 賮賷\n"
"``丿賱賷賱 丕賱賲亘鬲丿卅''."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"賮賷 丕賱賳賴丕賷丞, 爻賷鬲賲 爻丐丕賱賰 毓賳 丕匕丕 賰賳鬲 鬲乇賷丿 亘丿亍 丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞\n"
-"毓賳丿 亘丿亍 丕賱賳馗丕賲. 賱丕丨胤 兀賳賴 爻賷鬲賲 爻丐丕賱賰 賴匕丕 丕賱爻丐丕賱 丨鬲賶 賱賵 丕禺鬲乇鬲 毓丿賲 丕禺鬲亘丕乇\n"
-"丕賱鬲賴賷卅丞, 亘賰賱 賵囟賵丨, 爻鬲禺鬲丕乇 \"賱丕\" 丕匕丕 賰丕賳鬲 賲丕賰賷賳鬲賰 爻鬲爻鬲禺丿賲 賰噩賴丕夭\n"
-"禺丕丿賲, 兀賵 丕匕丕 賱賲 鬲賳噩丨 賮賷 鬲賴賷卅丞 丕賱毓乇囟\n"
-"亘卮賰賱 氐丨賷丨."
+msgid "Ukraine"
+msgstr "兀賵賰乇丕賳賷丕"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"丕匕丕 賰丕賳鬲 賴賳丕賰 禺丕丿賲丕鬲 賲禺鬲賱賮丞 賱賱亘胤丕賯丞 丕賱禺丕氐丞 亘賰, 賲毓 兀賵\n"
-"丿賵賳 鬲爻乇賷毓 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱禺丕丿賲 丕賱匕賷\n"
-"賷賳丕爻亘 丕丨鬲賷丕噩丕鬲賰."
+msgid "Application:"
+msgstr "丕賱鬲胤亘賷賯:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"丿賯丞 丕賱毓乇囟\n"
-"\n"
-" 賷賲賰賳賰 丕禺鬲賷丕乇 丿賯丞 丕賱毓乇囟 賵 毓賲賯 丕賱兀賱賵丕賳 賮賷 丕賱丨丿賵丿\n"
-"丕賱賲鬲賵賮乇丞 賱賱毓鬲丕丿. 丕禺鬲乇 鬲賱賰 丕賱鬲賷 鬲賳丕爻亘 丕丨鬲賷丕噩丕鬲賰 (賱丕 鬲夭丕賱\n"
-"鬲爻鬲胤賷毓 鬲睾賷賷乇 鬲賱賰 丕賱禺賷丕乇丕鬲 亘毓丿 丕賱鬲孬亘賷鬲). 賷鬲賲 毓乇囟 毓賷賳丞\n"
-"賲賳 丕賱鬲賴賷卅丞 丕賱賲禺鬲丕乇丞 毓賱賶 丕賱卮丕卮丞."
+msgid "External ISDN modem"
+msgstr "賲賵丿賲 ISDN 禺丕乇噩賷"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"丕賱卮丕卮丞\n"
-"\n"
-" 賷賲賰賳 賱亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 丕賰鬲卮丕賮 賵 鬲賴賷卅丞 丕賱卮丕卮丞 丕賱賲鬲氐賱丞 亘賲丕賰賷賳鬲賰\n"
-"丌賱賷丕賸. 丕賳 賱賲 賷氐賱 匕賱賰, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱卮丕卮丞 丕賱鬲賷 賱丿賷賰\n"
-"賲賳 丕賱賯丕卅賲丞."
+msgid "if set to yes, report check result by mail."
+msgstr "if set to yes, report check result by mail."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "丕禺鬲賷丕乇賰 ? (default %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "丨賱 丕賱賲卮丕賰賱"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "乇賷賵賳賷賵賳"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-"Monitor\n"
"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
-"Resolution\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"亘胤丕賯丞 丕賱乇爻賵賲\n"
-"\n"
-" 亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 賷賯賵賲 亘丕賰鬲卮丕賮 賵 鬲賴賷卅丞 丕賱亘胤丕賯丞 丕賱賲賵噩賵丿丞 毓賱賶 賳馗丕賲賰\n"
-"亘卮賰賱 丌賱賷. 丕賳 賱賲 賷丨氐賱 匕賱賰, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱亘胤丕賯丞 丕賱鬲賷 賱丿賷賰 亘丕賱賮毓賱\n"
-"賲賳 丕賱賯丕卅賲丞.\n"
+"鬲賲 丕乇爻丕賱 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞 丕賱賶 丕賱胤丕亘毓丞.\n"
+"賯丿 賷爻鬲睾乇賯 賴匕丕 亘毓囟 丕賱賵賯鬲 丨鬲賶 鬲亘丿兀 丕賱胤丕亘毓丞.\n"
+"丨丕賱丞 丕賱胤亘丕毓丞:\n"
+"%s\n"
"\n"
-" 賮賷 丨丕賱 丕匕丕 賰丕賳鬲 賴賳丕賰 禺丕丿賲丕鬲 乇爻賵賲賷丞 賲禺鬲賱賮丞 賱亘胤丕賯鬲賰, 賲毓 兀賵 亘丿賵賳\n"
-"鬲爻乇賷毓 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿, 賷賲賰賳賰 賮賷 賴匕賴 丕賱丨丕賱 丕禺鬲賷丕乇 丕賱禺丕丿賲 丕賱匕賷\n"
-"賷賳丕爻亘 丕丨鬲賷丕噩丕鬲賰 兀賰孬乇."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"賷賯賵賲 賱賷賳賰爻 亘廿丿丕乇丞 丕賱賵賯鬲 丨爻亘 鬲賵賯賷鬲 睾乇賷賳鬲卮 孬賲 賷鬲乇噩賲賴 丕賱賶\n"
-"丕賱鬲賵賯賷鬲 丕賱賲丨賱賷 丨爻亘 丕賱賲賳胤賯丞 丕賱夭賲賳賷丞 丕賱鬲賷 丕禺鬲乇鬲賴丕. 丕匕丕 賰丕賳鬲 丕賱爻丕毓丞\n"
-"丕賱鬲賷 賮賷 丕賱賱賵丨丞 丕賱乇卅賷爻賷丞 賲囟亘賵胤丞 毓賱賶 丕賱鬲賵賯賷鬲 丕賱賲丨賱賷, 賷賲賰賳賰 丕夭丕賱丞 鬲賳卮賷胤 匕賱賰\n"
-"毓賳 胤乇賷賯 丕夭丕賱丞 丕賱鬲兀卮賷乇 賲賳 \"爻丕毓丞 丕賱噩賴丕夭 賲囟亘賵馗丞 毓賱賶 鬲賵賯賷鬲 睾乇賷賳鬲卮\" 賵 丕賱鬲賷 "
-"爻鬲噩毓賱\n"
-"賱賷賳賰爻 賷毓賱賲 兀賳 爻丕毓丞 丕賱賳馗丕賲 賵 爻丕毓丞 丕賱噩賴丕夭 毓賱賶 賳賮爻 丕賱鬲賵賯賷鬲. 賴匕丕\n"
-"賲賮賷丿 毓賳丿賲丕 鬲爻鬲囟賷賮 丕賱賲丕賰賷賳丞 賳馗丕賲 鬲卮睾賷賱 丌禺乇 賲孬賱 Windows.\n"
-"\n"
-"禺賷丕乇 \"鬲夭丕賲賳 丌賱賷 賱賱賵賯鬲\" 爻賷賯賵賲 丌賱賷丕賸 亘囟亘胤 丕賱爻丕毓丞 毓賳 胤乇賷賯\n"
-"丕?鬲氐丕賱 亘禺丕丿賲 賵賯鬲 亘毓賷丿 毓賱賶 丕?賳鬲乇賳鬲. 賰賷 鬲毓賲賱 賴匕賴 丕賱賲賷夭丞,\n"
-"賷噩亘 兀賳 鬲賰賵賳 賱丿賷賰 賵氐賱丞 丕賳鬲乇賳鬲 毓丕賲賱丞. 賲賳 丕?賮囟賱 丕禺鬲賷丕乇 禺丕丿賲\n"
-"丕賱賵賯鬲 丕?賯乇亘 丕賱賷賰. 賴匕丕 丕賱禺賷丕乇 賷孬亘鬲 禺丕丿賲 賵賯鬲\n"
-"賷賲賰賳 丕爻鬲禺丿丕賲賴 毓賳 胤乇賷賯 丕賱賲丕賰賷賳丕鬲 丕?禺乇賶 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞."
+msgid "daily"
+msgstr "賷賵賲賷賾丕賸"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"賴匕賴 丕賱禺胤賵丞 賴賷 ?禺鬲賷丕乇 丕賱禺丿賲丕鬲 丕賱鬲賷 爻賷鬲賲 鬲卮睾賷賱賴丕 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱.\n"
-"\n"
-"爻賷賯賵賲 DrakX 亘毓乇囟 賯丕卅賲丞 亘賰賱 丕賱禺丿賲丕鬲 丕賱賲鬲賵賮乇丞 賮賷 賴匕丕 丕賱鬲孬亘賷鬲.\n"
-"乇丕噩毓 賰賱 禺丿賲丞 亘鬲賲毓賳 賵 賯賲 亘廿夭丕賱丞 丕賱鬲兀卮賷乇 賲賳 鬲賱賰 丕賱禺丿賲丕鬲 丕賱鬲賷 ? 鬲丨鬲丕噩賴丕\n"
-"亘卮賰賱 丿丕卅賲 毓賳丿 丕?賯賱丕毓.\n"
-"\n"
-"爻賷鬲賲 毓乇囟 卮乇丨 賯氐賷乇 丨賵賱 丕賱禺丿賲丞 毓賳丿\n"
-"丕禺鬲賷丕乇賴丕. 毓賲賵賲丕賸, 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿 賲丕 丕匕丕 賰丕賳鬲 丕賱禺丿賲丞 賲賮賷丿丞 兀賲 ?,\n"
-"賮賲賳 丕?賮囟賱 鬲乇賰 丕賱禺賷丕乇 丕?賮鬲乇丕囟賷.\n"
-"\n"
-"!! 賮賷 賴匕賴 丕賱賲乇丨賱丞 賰賳 丨匕乇丕購 丕匕丕 賰賳鬲 鬲乇賷丿 丕爻鬲禺丿丕賲 賲丕賰賷賳鬲賰\n"
-"賰禺丕丿賲: 乇亘賲丕 賱賳 鬲乇賷丿 亘丿亍 兀賷 禺丿賲丕鬲 ? 鬲丨鬲丕噩賴丕.\n"
-"賮囟賱丕賸 鬲匕賰乇 兀賳 丕賱毓丿賷丿 賲賳 丕賱禺丿賲丕鬲 賯丿 鬲賰賵賳 禺胤乇丞 丕匕丕 賰丕賳鬲\n"
-"賲鬲丕丨丞 毓賱賶 丕賱禺丕丿賲. 亘卮賰賱 毓丕賲 丕禺鬲乇 賮賯胤 丕賱禺丿賲丕鬲 丕賱鬲賷 鬲丨鬲丕噩賴丕.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "賵 胤丕亘毓丞 睾賷乇 賲毓乇賵賮丞"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"丕賱胤丕亘毓丞\": 丕賱賳賯乇 毓賱賶 \"鬲賴賷卅丞\" 爻賷賮鬲丨 賲毓丕賱噩 鬲賴賷卅丞\n"
-"丕賱胤丕亘毓丞. 丕賯乇兀 丕賱賮囟賱 丕賱賲禺鬲氐 賮賷 ``丿賱賷賱 丕賱賲亘鬲丿卅''\n"
-"賱賰夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲 毓賳 賰賷賮賷丞 丕毓丿丕丿 胤丕亘毓丞 噩丿賷丿丞. 丕賱賵丕噩賴丞\n"
-"賴賳丕賰 賲賲丕孬賱丞 賱鬲賱賰 丕賱賲爻鬲禺丿賲丞 兀孬賳丕亍 丕賱鬲孬亘賷鬲."
+msgid "Ireland"
+msgstr "兀賷乇賱賳丿丕"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "丕氐丿丕乇丞 丕賱賱亘"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " 鬲賴賷卅丞 丕賱廿爻鬲毓丕丿丞 "
+
+#: ../../Xconfig/test.pm:1
#, c-format
+msgid "Is this the correct setting?"
+msgstr "賴賱 賴匕丕 賴賵 丕賱廿毓丿丕丿 丕賱氐丨賷丨責"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2349,4338 +2318,4175 @@ msgstr ""
"``丿賱賷賱 丕賱賲亘鬲丿卅'' 賱賱鬲賮丕氐賷賱 丨賵賱 丕賱鬲賴賷卅丞, 兀賵 亘亘爻丕胤丞 丕賳鬲馗乇 丨鬲賶 賷鬲賲\n"
"鬲孬亘賷鬲 丕賱賳馗丕賲 賵 丕爻鬲禺丿賲 丕賱亘乇賳丕賲噩 丕賱賲匕賰賵乇 賴賳丕賰 ?毓丿丕丿 丕賱賵氐賱丞."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"鬲孬亘賷鬲 Mandrake Linux 賲賵夭毓 毓賱賶 丕賱毓丿賷丿 賲賳 丕賱兀賯乇丕氐. DrakX\n"
-"賷毓賱賲 廿匕丕 賰丕賳鬲 丨夭賲丞 賲丕 賮賷 賯乇氐 丌禺乇 賵 爻賷禺乇噩 丕賱賯乇氐\n"
-"丕賱丨丕賱賷 賵 爻賷胤賱亘 賲賳賰 兀賳 鬲丿禺賱 賯乇氐丕賸 賲禺鬲賱賮丕 賰賲丕 賴賵 賲胤賱賵亘."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"賮賷 丕賱兀毓賱賶 爻鬲噩丿 鬲賯爻賷賲丕鬲 賱賷賳賰爻 丕賱賲賵噩賵丿丞 賵 丕賱鬲賷 鬲賲 丕賷噩丕丿賴丕 毓賱賶 丕賱賯乇氐 丕賱氐賱亘 "
-"丕賱禺丕氐 亘賰.\n"
-"賷賲賰賳賰 兀賳 鬲購亘賯賷 廿禺鬲賷丕乇丕鬲 丕賱賲毓丕賱噩, 賵 賴賷 噩賷丿丞 賱兀睾賱亘 兀賳賵丕毓 丕賱鬲孬亘賷鬲.\n"
-"廿匕丕 賯賲鬲 亘毓賲賱 兀賷 鬲睾賷賷乇丕鬲 賮賷噩亘 毓賱賷賰 兀賳 鬲毓乇賮 丕賱鬲賯爻賷賲 丕賱噩匕乇 (\"/\"). 賱丕 鬲禺鬲乇\n"
-"鬲賯爻賷賲丕鬲 囟睾賷乇丞 噩丿丕 賵 廿賱丕 賱賳 鬲爻鬲胤賷毓 鬲孬亘賷鬲 亘乇丕賲噩 賰丕賮賷丞. 廿匕丕 賰賳鬲 鬲乇賷丿 鬲禺夭賷賳 "
-"丕賱亘賷丕賳丕鬲\n"
-"毓賱賶 鬲賯爻賷賲 賲爻鬲賯賱 賮爻鬲丨鬲丕噩 丕賱賶 毓賲賱 鬲賯爻賷賲 賱賭\"/home\"\n"
-"(賲賲賰賳 賮賯胤 廿匕丕 賰丕賳 賱丿賷賰 兀賰孬乇 賲賳 鬲賯爻賷賲 賱賱賷賳賰爻).\n"
-"\n"
-"賰賱 鬲賯爻賷賲 賲購毓胤賶 亘丕賱爻賰賱 丕賱鬲丕賱賷: \"丕賱廿爻賲\", \"丕賱爻毓丞\".\n"
-"\n"
-"\"丕賱廿爻賲\" 賲乇賰亘 亘丕賱爻賰賱 丕賱鬲丕賱賷: \"賳賵毓 丕賱賯乇氐 丕賱氐賱亘\", \"乇賯賲 丕賱賯乇氐 丕賱氐賱亘\",\n"
-"\"乇賯賲 丕賱鬲賯爻賷賲\" (賲孬賱丕, \"hda1\").\n"
-"\n"
-"\"乇賯賲 丕賱賯乇氐 丕賱氐賱亘\" 丿丕卅賲丕 賴賵 丨乇賮 亘毓丿 \"hd\" 兀賵 \"sd\". 亘丕賱賳爻亘丞 賱賱兀賯乇丕氐 "
-"丕賱氐賱亘丞\n"
-"賲賳 賳賵毓 IDE 賮廿賳:\n"
-" * \"a\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱兀爻丕爻賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱兀爻丕爻賷\",\n"
-"\n"
-" * \"b\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱孬丕賳賵賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱兀爻丕爻賷\",\n"
-"\n"
-" * \"c\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱兀爻丕爻賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱孬丕賳賵賷\",\n"
-"\n"
-" * \"d\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱孬丕賳賵賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱孬丕賳賵賷\",\n"
-"\n"
-"兀賲丕 亘丕賱賳爻亘丞 賱兀賯乇丕氐 爻賰夭賷 SCSI 賮丕賱丨乇賮 \"a\" 賷毓賳賷 \"兀賯賱 賲毓乇賮 SCSI\", 賵 丕賱丨乇賮 \"b"
-"\"\n"
-"賷毓賳賷 \"孬丕賳賷 兀賯賱 賲毓乇賮 SCSI\", 丕賱禺."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"賯亘賱 丕賱賲鬲丕亘毓丞, 毓賱賷賰 賯乇丕亍丞 亘賳賵丿 丕賱鬲乇禺賷氐 噩賷丿丕賸. 丕賳賴丕\n"
-"鬲睾胤賷 賰賱 鬲賵夭賷毓丞 Mandrake Linux. 丕匕丕 賰賳鬲 鬲賵丕賮賯 毓賱賶 賰賱 丕賱亘賳賵丿\n"
-"丕賱賲賵噩賵丿丞 賮賷賴丕, 賯賲 亘丕賱鬲兀卮亘乇 毓賱賶 氐賳丿賵賯 \"丕賯亘賱\". 丕賳 賱賲 鬲賯亘賱, 賯賲 亘廿睾賱丕賯\n"
-"丕賱賰賲亘賷賵鬲乇."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "毓賱賷賰 兀賷囟丕 鬲噩賴賷夭 %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"鬲毓匕乇 丕賱賵氐賵賱 丕賱賶 賵丨丿丕鬲 丕賱賳賵丕丞 丕賱禺丕氐丞 亘賳賵丕丞 丕賱賳馗丕賲 (丕賱賲賱賮 %s 賲賮賯賵丿), 亘卮賰賱 毓丕賲 "
-"賷毓賳賷 賴匕丕 兀賳 賯乇氐 丕賱廿賯賱丕毓 丕賱賲乇賳 賱賷爻 賲丨丿賾孬丕賸 賲毓 賵爻賷胤 丕賱鬲孬亘賷鬲 (賮囟賱丕賸 賯賲 亘廿賳卮丕亍 賯乇氐 "
-"丕賯賱丕毓 噩丿賷丿)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"賱賯丿 馗賴乇 禺胤兀 - 賱賲 賷鬲賲 丕賷噩丕丿 兀噩賴夭丞 氐丕賱丨丞 賷賲賰賳 丕賳卮丕亍 兀賳馗賲丞 賲賱賮丕鬲 噩丿賷丿丞. 鬲兀賰丿 賲賳 "
-"丕賱毓鬲丕丿 丕賱禺丕氐 亘賰 賱賲毓乇賮丞 卮亘亘 賴匕賴 丕賱賲卮賰賱丞"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "禺胤兀 賮賷 賯乇丕亍丞 丕賱賲賱賮 %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"賱丕爻鬲禺丿丕賲 丕禺鬲賷丕乇丕鬲賰 丕賱賲丨賮賵馗丞 賱賱丨夭賲, 賯賲 亘亘丿亍 丕賱鬲孬亘賷鬲 賲毓 禺賷丕乇 ``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "廿毓丿丕丿丕鬲 丕賱賲毓丕賱噩"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "賴匕丕 丕賱賯乇氐 丕賱賲乇賳 睾賷乇 賲噩賴夭 毓賱賶 賳馗丕賲 賲賱賮丕鬲 FAT"
+msgid "Autoprobe"
+msgstr "鬲丨賯賯 丌賱賷"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "兀丿禺賱 賯乇氐 賲乇賳 賲噩賴夭 毓賱賶 賳馗丕賲 賲賱賮丕鬲 FAT 賮賷 丕賱爻賵丕賯丞 %s"
+msgid "Backup system files..."
+msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Can't use broadcast with no NIS domain"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"爻賷鬲賲 丨匕賮 賴匕賴 丕賱丨夭賲 賱賰賷 鬲鬲賲 鬲乇賯賷丞 丕賱賳馗丕賲: %s\n"
-"\n"
-"\n"
-"賴賱 鬲乇賷丿 丨匕賮 賴匕賴 丕賱丨夭賲 賮毓賱丕賸責\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "賱丕"
+msgid "Removing printer \"%s\"..."
+msgstr "噩丕乇賷 丕夭丕賱丞 丕賱胤丕亘毓丞 \"%s\" ..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "賳毓賲"
+msgid "drakfloppy"
+msgstr "丿乇賷賰 賱賱丕賯乇丕氐 丕賱賲乇賳丞"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"賱賯丿 丕禺鬲乇鬲 丕賱禺丕丿賲丕鬲 丕賱鬲丕賱賷丞: %s\n"
-"\n"
-"\n"
-"賴匕賴 丕賱禺丕丿賲丕鬲 賲賮毓賾賱丞 丕賮鬲乇丕囟賷丕賸, 賵 賱丕 賷賵噩丿 賱賴賲 賲卮丕賰賱 兀賲賳賷丞\n"
-"賲毓乇賵賮丞, 賵 賱賰賳 賯丿 鬲賰鬲卮賮 亘毓囟 丕賱賲卮丕賰賱 丕賱噩丿賷丿丞. 賮賷 賴匕賴 丕賱丨丕賱丞, 鬲兀賰丿 賲賳 兀賳\n"
-"鬲賯賵賲 亘丕賱鬲乇賯賷丞 賮賷 兀賯乇亘 賵賯鬲 賲賲賰賳.\n"
-"\n"
+"賮囟賱丕賸 丨丿丿 賲賰丕賳 賲賱賮 auto_install.cfg.\n"
"\n"
-"賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 鬲乇賷丿 鬲孬亘賷鬲 賴匕賴 丕賱禺丕丿賲丕鬲 丕賱丌賳責\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "鬲賴賷卅丞 丕賱賳馗丕賲"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "鬲孬亘賷鬲 丕賱賳馗丕賲"
+"丕鬲乇賰 丕賱丨賯賱 賮丕乇睾丕賸 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丕丿 賵囟毓 丕賱鬲孬亘賷鬲 丕賱丕賱賷.\n"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "噩丕乇賷 丕睾賱丕賯 丕賱卮亘賰丞"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "賲爻鬲賵賶 丕賱賲毓賱賵賲丕鬲 丕賱鬲賷 賷賲賰賳 丕賱丨氐賵賱 毓賱賷賴丕 賲賳 鬲毓賱賷賲丕鬲 cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "噩丕乇賷 鬲卮睾賷賱 丕賱卮亘賰丞"
+msgid "Peru"
+msgstr "亘賷乇賵"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "賮卮賱鬲 丕賱鬲噩夭卅丞: %s"
+msgid " on device: %s"
+msgstr " 毓賱賶 丕賱噩賴丕夭: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "毓孬乇 賲毓丕賱噩 丕賱鬲噩夭卅丞 賮賷 DrakX 毓賱賶 丕賱丨賱賵賱 丕賱鬲丕賱賷丞:"
+msgid "Remove Windows(TM)"
+msgstr "丕丨匕賮 Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "賱丕 賷賲賰賳賳賷 丕賷噩丕丿 賲爻丕丨丞 賮丕乇睾丞 賱賱鬲孬亘賷鬲"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "鬲亘丿兀 禺丕丿賲 禺胤賵胤 X (賴匕丕 丕賱夭丕賲賷 賱賰賷 賷毓賲賱 XFree)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"賷賲賰賳賰 丕賱丌賳 鬲噩夭卅丞 %s.\n"
-"毓賳丿賲丕 鬲賳鬲賴賷 賱丕 鬲賳爻賶 丕賱丨賮馗 亘丕爻鬲禺丿丕賲 `w'"
+"鬲賲 丕爻鬲禺乇丕噩 兀睾賱亘 賴匕賴 丕賱賯賷賲\n"
+"賲賳 丕賱賳馗丕賲.\n"
+"賷賲賰賳賰 丕賱鬲毓丿賷賱 丕匕丕 丕丨鬲噩鬲 賱匕賱賰."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "丕爻鬲禺丿賲 fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "丕禺鬲乇 賲賱賮 兀賵 丿賱賷賱 丕賱禺胤賵胤 賵 丕囟睾胤 '丕囟丕賮丞'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "鬲噩夭卅丞 賲禺氐氐丞"
+msgid "Madagascar"
+msgstr "賲丿睾卮賯乇"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "賰賱 丕賱鬲噩夭卅丕鬲 賵 亘賷丕賳丕鬲賴丕 爻鬲囟賷毓 賲賳 毓賱賶 丕賱爻賵丕賯丞 %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "賱丿賷賰 兀賰孬乇 賲賳 賯乇氐 氐賱亘, 賮賷 兀賷賴賲 鬲乇賷丿 鬲孬亘賷鬲 賱賷賳賰爻責"
+msgid "Cron not available yet as non-root"
+msgstr "Cron 睾賷乇 賲鬲賵賮乇 丨鬲賶 丕賱丌賳 賱賱賲爻鬲禺丿賲賷賳 睾賷乇 丕賱噩匕乇"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "丕賲爻丨 賰賱 丕賱賯乇氐"
+msgid "System"
+msgstr "丕賱賳馗丕賲"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "丕丨匕賮 Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲 賴匕賴 丕賱賲賷夭丞責"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "賱丕 鬲賵噩丿 鬲噩夭卅丞 FAT 賯丕亘賱 賱鬲睾賷賷乇 丨噩賲賴丕 (兀賵 賱丕 鬲賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賲鬲亘賯賷丞)"
+msgid "Arabic"
+msgstr "丕賱毓乇亘賷丞"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"賱賱鬲兀賰丿 賲賳 氐丨丞 丕賱亘賷丕賳丕鬲 亘毓丿 丕毓丕丿丞 鬲丨噩賷賲 丕賱鬲噩夭卅丕鬲, \n"
-"爻賷鬲賲 丕賱丿賯賷賯 毓賱賶 賳馗丕賲 丕賱賲賱賮丕鬲 毓賳丿 丕賱鬲卮睾賷賱 丕賱賯丕丿賲 賱賭 Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "賮卮賱 鬲睾賷賷乇 丨噩賲 FAT: %s"
+"\n"
+"- 禺賷丕乇丕鬲:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "噩丕乇賷 鬲睾賷賷乇 丨噩賲 鬲噩夭卅丞 Windows"
+msgid "Password required"
+msgstr "賷購丨鬲丕噩 丕賱賶 賰賱賲丞 丕賱賲乇賵乇"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "噩丕乇賷 鬲睾賷賷乇 丕賱丨噩賲"
+msgid "%d minutes"
+msgstr "%d 丿賯丕卅賯"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "丕賱鬲噩夭卅丞 %s"
+msgid "Graphics card: %s"
+msgstr "亘胤丕賯丞 丕賱卮丕卮丞: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "毓賱賶 兀賷 賲爻丕丨丞 鬲乇賷丿 丨賮馗 Windows"
+msgid "WebDAV transfer failed!"
+msgstr "賮卮賱鬲 毓賲賱賷丞 賳賯賱 WebDAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"鬲丨匕賷乇!\n"
-"\n"
-"DrakX 爻賷賯賵賲 丕賱丌賳 亘鬲睾賷賷乇 丨噩賲 鬲噩夭卅丞 Windows. 賰賳 丨匕乇丕賸:\n"
-"賴匕賴 丕賱毓賲賱賷丞 禺胤乇丞. 賮廿匕丕 賱賲 鬲賰賳 賮毓賱鬲 匕賱賰,\n"
-"賷噩亘 毓賱賷賰 兀賵賱丕賸 丕賱禺乇賵噩 賲賳 丕賱鬲孬亘賷鬲, 孬賲 卮睾賾賱 scandisk\n"
-"賮賷 Windows (賵 丕禺鬲賷丕乇賷丕賸 defrag), 孬賲 兀毓丿\n"
-"丕賱鬲孬亘賷鬲. 賷噩亘 毓賱賷賰 賰匕賱賰 毓賲賱 賳爻禺丞 丕丨鬲賷丕胤賷丞 賲賳 亘賷丕賳丕鬲賰.\n"
-"毓賳丿賲丕 鬲賰賵賳 賲鬲兀賰丿丕賸, 丕賳賯乇 賲賵丕賮賯."
+msgid "XFree configuration"
+msgstr "廿毓丿丕丿 XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+msgid "Choose action"
+msgstr "丕禺鬲乇 丨丿孬"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "噩丕乇賷 丨爻丕亘 賲爻丕丨丞 鬲噩夭卅丞 Windows"
+msgid "French Polynesia"
+msgstr "亘賵賱賷賳賷爻賷丕 丕賱賮乇賳爻賷丞"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"賱賲 鬲鬲賲賰賳 兀丿丕丞 鬲睾賷賷乇 丨噩賲 FAT 賲賳 丕賱鬲毓丕賲賱 賲毓 鬲噩夭卅鬲賰, \n"
-"馗賴乇 丕賱禺胤兀 丕賱鬲丕賱賷: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "兀賷 鬲噩夭卅丞 鬲乇賷丿 鬲睾賷賷乇 丨噩賲賴丕責"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "丕爻鬲禺丿賲 丕賱賲爻丕丨丞 丕賱賮丕乇睾丞 毓賱賶 鬲噩夭卅丞 Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "丿毓賲 胤丕亘毓丕鬲 OKI 4w 賵 丕賱胤丕亘毓丕鬲 丕賱賲鬲賵丕賮賯丞."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"賱丕 鬲賵噩丿 鬲噩夭卅丞 FAT 賱丕爻鬲禺丿丕賲賴丕 賰賭 loopback (兀賵 賱丕 鬲賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賲鬲亘賯賷丞)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "鬲卮睾賾賱 賳馗丕賲 丕賱氐賵鬲 ALSA (Advanced Linux Sound Arachitecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "丨噩賲 鬲噩夭卅丞 丕賱鬲亘丿賷賱 亘丕賱賲賷睾丕亘丕賷鬲"
+msgid "Installing driver for %s card %s"
+msgstr "噩丕乇賷 鬲孬亘賷鬲 賲卮睾賱 %s 賱賱亘胤丕賯丞 %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "丨噩賲 丕賱鬲噩夭卅丞 丕賱噩匕乇賷丞 亘丕賱賲賷睾丕亘丕賷鬲"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"賱賯丿 賯賲鬲 亘賳賯賱 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞 丕賱爻丕亘賯丞 (\"%s\"), 賴賱 賷噩亘 兀賷囟丕賸 兀賳 鬲賰賵賳 "
+"丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞 鬲丨鬲 賳馗丕賲 丕賱胤亘丕毓丞 丕賱噩丿賷丿 %s責"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "丕禺鬲乇 丕賱兀丨噩丕賲"
+msgid "Enable Server"
+msgstr "賲賰賾賳 丕賱禺丕丿賲"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "兀賷 鬲噩夭卅丞 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕 賲賳 兀噩賱 Linux4Win"
+msgid "Ukrainian"
+msgstr "丕賱兀賵賰乇丕賳賷丞"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "丕爻鬲禺丿賲 鬲噩夭卅丞 Windows 賰賭 loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"丕賱賵氐賵賱 丕賱賶 丕賱卮亘賰丞 賱丕 賷毓賲賱 賵 賱賲 賷賲賰賳 亘丿丐賴. 賮囟賱丕賸 鬲兀賰丿 賲賳 丕賱鬲賴賷卅丞 賱丿賷賰 賵 丕賱毓鬲丕丿 "
+"丕賱禺丕氐 亘賰. 孬賲 丨丕賵賱 鬲賴賷卅丞 丕賱胤丕亘毓丞 丕賱亘毓賷丿丞 賲乇丞 兀禺乇賶."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "賱丕 鬲賵噩丿 鬲噩夭卅丞 賱丕爻鬲禺丿丕賲賴丕"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "賮囟賱丕賸 兀丿禺賱 賯乇氐 丕賱廿賯賱丕毓 丕賱匕賷 鬲爻鬲禺丿賲賴 賮賷 丕賱爻賵丕賯丞 %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "丕爻鬲禺丿賲 丕賱鬲噩夭卅丕鬲 丕賱賲賵噩賵丿丞"
+msgid "Local network(s)"
+msgstr "丕賱卮亘賰丞/丕賱卮亘賰丕鬲 丕賱賲丨賱賷丞"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "賱丕 鬲賵噩丿 賲爻丕丨丞 賮丕乇睾丞 賱毓賲賱 丕賱鬲噩夭卅丕鬲 丕賱噩丿賷丿丞"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "丕丨匕賮 Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "丕爻鬲毓賲賱 丕賱賲爻丕丨丞 丕賱賮丕乇睾丞"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"鬲賲鬲 鬲賴賷卅丞 丕賱賲丕爻丨 丕賱囟賵卅賷 %s.\n"
+"賷賲賰賳賰 丕賱丌賳 賲爻丨 丕賱賲爻鬲賳丿丕鬲 亘丕爻鬲禺丿丕賲 \"XSane\" 賲賳 賮乇毓 賵爻丕卅胤 賲鬲毓丿丿丞/亘乇丕賲噩 乇爻賵賲賷丞 "
+"賮賷 賯丕卅賲丞 丕賱鬲胤亘賷賯丕鬲."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "賱丿賷賰 鬲噩夭卅丞 FAT 鬲賲 鬲丨賲賷賱賴丕 毓賱賶 /boot/efi"
+msgid "Firewire controllers"
+msgstr "賲鬲丨賰賲丕鬲 Firewire"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"賱賷爻鬲 賱丿賷賰 鬲噩夭卅丞 鬲亘丿賷賱.\n"
+"亘毓丿賲丕 賯賲鬲 亘鬲賴賷卅丞 丕賱賲毓丕賲?鬲 丕賱毓丕賲丞 賱賲丨賲賾賱 丕?賯賱丕毓, 賮爻賷鬲賲\n"
+"毓乇囟 賯丕卅賲丞 禺賷丕乇丕鬲 丕?賯賱丕毓 丕賱賲鬲賵賮乇丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱.\n"
"\n"
-"賴賱 鬲乇賷丿 丕賱賲鬲丕亘毓丞 毓賱賶 兀賷 丨丕賱責"
+"丕匕丕 賰丕賳鬲 賴賳丕賰 兀賳馗賲丞 鬲卮睾賷賱 兀禺乇賶 賲孬亘鬲丞 毓賱賶 賲丕賰賷賳鬲賰 賮爻賷鬲賲 丕囟丕賮鬲賴丕\n"
+"丌賱賷丕賸 丕賱賶 賯丕卅賲丞 丕?賯賱丕毓. 賷賲賰賳賰 丕賱鬲丨賰賲 亘丕賱禺賷丕乇丕鬲\n"
+"丕賱賲賵噩賵丿丞 亘賳賯乇 \"丕囟賮\" ?賳卮丕亍 賲丿禺賱 噩丿賷丿, 賵 丕禺鬲賷丕乇 賲丿禺賱 賵\n"
+"賳賯乇 \"鬲毓丿賷賱\" 兀賵 \"丨匕賮\" 賱鬲毓丿賷賱 兀賵 丨匕賮 丕賱賲丿禺賱. \"賲賵丕賮賯\" 賷鬲兀賰丿\n"
+"賲賳 鬲睾賷賷乇丕鬲賰.\n"
+"\n"
+"乇亘賲丕 ? 鬲乇賷丿 ?賷 卮禺氐 賷鬲賲賰賳 賲賳 丕毓丕丿丞 鬲卮睾賷賱 丕賱賲丕賰賷賳丞 兀賳 賷爻鬲胤賷毓\n"
+"丕賱賵氐賱 丕賱賶 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶. 賷賲賰賳賰 丨匕賮 丕賱賲丿丕禺賱 丕賱賲賯丕亘賱丞\n"
+"?賳馗賲丞 丕賱鬲卮睾賷賱 賱丨匕賮賴丕 賲賳 賯丕卅賲丞 賲丨賲賾賱 丕?賯賱丕毓, 賱賰賳 賮賷 賴匕賴 丕賱丨丕賱丞 爻鬲丨鬲丕噩 丕賱賶 賯乇氐\n"
+"賲乇賳 賱賱廿賯?毓 賰賷 鬲鬲賲賰賳 賲賳 丕賱賵氐賵賱 丕賱賶 兀賳馗賲丞\n"
+"丕賱鬲卮睾賷賱 丕?禺乇賶!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"賷噩亘 兀賳 鬲賰賵賳 賱丿賷賰 鬲噩夭卅丞 噩匕乇賷丞.\n"
-"賱賴匕丕 丕賱睾乇囟 丕賳卮卅 鬲噩夭卅丞 (兀賵 丕賳賯乇 毓賱賶 鬲噩夭卅丞 賲賵噩賵丿丞).\n"
-"孬賲 丕禺鬲乇 ``賳賯胤丞 丕賱鬲丨賲賷賱'' 賵 丕噩毓賱賴丕 `/'"
+msgid "System mode"
+msgstr "賵囟毓 丕賱賳馗丕賲"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"亘毓囟 丕賱毓鬲丕丿 丕賱賲賵噩賵丿 毓賱賶 噩賴丕夭賰 賷丨鬲丕噩 丕賱賶 賲卮睾賱丕鬲 ``鬲噩丕乇賷丞'' 賰賷 鬲毓賲賱.\n"
-"賷賲賰賳賰 丕賷噩丕丿 賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲 毓賳賴丕 賮賷: %s"
+"賱賱胤亘丕毓丞 毓賱賶 胤丕亘毓丞 NetWare, 鬲丨鬲丕噩 丕賱賶 丕毓胤丕亍 丕爻賲 禺丕丿賲 胤亘丕毓丞 NetWare (賱丕丨胤 兀賳賴 "
+"賯丿 賷禺鬲賱賮 毓賳 丕爻賲 賲爻鬲囟賷賮 TCP/IP!) 亘丕賱廿囟丕賮丞 丕賱賶 丕爻賲 丕賱氐賮 賱賱胤丕亘毓丞 丕賱鬲賷 乇睾亘 賮賷 "
+"丕賱賵氐賵賱 丕賱賷賴丕 亘丕賱廿囟丕賮丞 丕賱賶 丕爻賲 賲爻鬲禺丿賲 賵 賰賱賲丞 賲乇賵乇 賲賳丕爻亘鬲賷賳."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"鬲賴丕賳賷賳丕, 丕賱鬲孬亘賷鬲 賯丿 丕賳鬲賴賶.\n"
-"丕丨匕賮 賵爻賷胤 丕賱廿賯賱丕毓 賵 丕囟睾胤 夭乇 丕丿禺賱 賱廿毓丕丿丞 丕賱鬲卮睾賷賱.\n"
-"\n"
-"\n"
-"賱賲毓賱賵賲丕鬲 丨賵賱 丕賱廿氐賱丕丨丕鬲 丕賱賲鬲賵賮乇丞 賱賴匕丕 丕賱廿氐丿丕乇 賲賳 Mandrake Linux,\n"
-"夭乇 氐賮丨丞 鬲氐丨賷丨 丕賱兀禺胤丕亍 丕賱賲鬲賵賮乇丞 賲賳:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"丕賱賲毓賱賵賲丕鬲 丨賵賱 鬲賴賷卅丞 丕賱賳馗丕賲 賲鬲賵賮乇丞 賮賷 賮氐賱\n"
-"賲丕 亘毓丿 丕賱鬲孬亘賷鬲 賮賷 丿賱賷賱 賲爻鬲禺丿賲 Mandrake 丕賱乇爻賲賷."
+msgid "Netmask:"
+msgstr "Netmask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "丕賱丨丕賯"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "兀毓丿 鬲丨賲賷賱 賯丕卅賲丞 丕賱胤丕亘毓丕鬲 (賱毓乇囟 賰賱 胤丕亘毓丕鬲 CUPS 丕賱亘毓賷丿丞 丕賱賲鬲賵賮乇丞)"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"2. Limited Warranty\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
+"毓賳丿 鬲卮睾賷賱 賴匕丕 丕賱禺賷丕乇, 賮毓賳丿 賰賱 亘丿丕賷丞 鬲卮睾賷賱 賱賭CUPS 爻賷鬲賲 丕賱鬲兀賰丿 丌賱賷丕賸 賲賳 賲丕\n"
"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
+"- 丕匕丕 賰丕賳 LPD/LPRng 賲孬亘鬲丕賸, 賱賳 鬲鬲賲 丕賱賰鬲丕亘丞 賮賵賯 /etc/printcap 毓賳 胤乇賷賯 CUPS\n"
"\n"
+"- 丕匕丕 賰丕賳 /etc/cups/cupsd.conf 賲賮賯賵丿, 爻賷鬲賲 丕賳卮丕丐賴 賮賷 賴匕賴 丕賱丨丕賱\n"
"\n"
-"3. The GPL License and Related Licenses\n"
+"- 丕匕丕 賰丕賳鬲 賲毓賱賵賲丕鬲 丕賱胤亘丕毓丞 賲賳卮賵乇丞, 兀賷 兀賳賴丕 賱丕 鬲丨鬲賵賷 \"localhost\" 賰廿爻賲 "
+"賱賱禺丕丿賲.\n"
"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
+"丕匕丕 賰丕賳鬲 亘毓囟 賴匕賴 丕賱廿噩乇丕亍丕鬲 賯丿 鬲爻亘亘鬲 亘賲卮丕賰賱 賱賰, 毓胤賾賱 賴匕丕 丕賱禺賷丕乇, 賱賰賳 賮賷 賴匕賴 "
+"丕賱丨丕賱 毓賱賷賰 丕賱廿賳鬲亘丕賴 賱賴匕賴 丕賱賳賯丕胤."
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"4. Intellectual Property Rights\n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entering step `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "賲爻丕毓丿丞"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "睾賷乇 賲毓丿賾"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "廿毓丿丕丿"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "賴賱 鬲乇賷丿 丕賱賲鬲丕亘毓丞 毓賱賶 兀賷 丨丕賱責"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "賰丕賳 賴賳丕賰 禺胤兀 賮賷 鬲孬亘賷鬲 丕賱丨夭賲:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "賰丕賳 賴賳丕賰 禺胤兀 賮賷 鬲乇鬲賷亘 丕賱丨夭賲:"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"睾賷乇 丕賱賯乇氐 丕賱賲丿賲噩!\n"
+"丕賱鬲孬亘賷鬲 丕賱丌賱賷 賯丿 賷鬲賲 亘卮賰賱 鬲賱賯丕卅賷 丕匕丕 兀乇丿鬲 匕賱賰,\n"
+"賮賷 賴匕賴 丕賱丨丕賱丞 爻賷爻鬲賵賱賷 毓賱賶 賰賱 丕賱賯乇氐 丕賱氐賱亘 賱丿賷賰!!\n"
+"(賴匕丕 亘丕賱賳爻亘丞 賱賱鬲孬亘賷鬲 毓賱賶 噩賴丕夭 丌禺乇).\n"
"\n"
-"賮囟賱丕賸 兀丿禺賱 丕賱賯乇氐 丕賱賲丿賲噩 丕賱賲爻賲賶 \"%s\" 賮賷 丕賱爻賵丕賯丞 賵 丕賳賯乇 賲賵丕賮賯 毓賳丿賲丕 鬲賳鬲賴賷.\n"
-"丕匕丕 賱賲 賷賰賳 丕賱賯乇氐 賱丿賷賰, 丕囟睾胤 丕賱睾丕亍 賱鬲噩賳亘 丕賱鬲孬亘賷鬲 賲賳 賴匕丕 丕賱賯乇氐 丕賱賲丿賲噩."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "丕乇賮囟"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "丕賯亘賱"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "噩丕乇賷 鬲孬亘賷鬲 丕賱丨夭賲丞 %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d 丨夭賲"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "賱丕 鬲賮丕氐賷賱"
+"乇亘賲丕 鬲賮囟賱 丕毓丕丿丞 毓賲賱賷丞 丕賱鬲孬亘賷鬲.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "鬲賮丕氐賷賱"
+msgid "Network printer \"%s\", port %s"
+msgstr "胤丕亘毓丞 卮亘賰丞 \"%s\", 丕賱賲賳賮匕 %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "丕賳鬲乇 賲賳 賮囟賱賰, 噩丕乇賷 丕賱鬲丨囟賷乇 賱賱鬲孬亘賷鬲..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "賮囟賱丕賸 丕禺鬲乇 賲賵丕卅賲 丕賱卮亘賰丞 丕賱匕賷 爻賷鬲賲 亘賴 丕賱廿鬲氐丕賱 亘丕賱卮亘賰丞 丕賱賲丨賱賷丞."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "丕賱賵賯鬲 丕賱賲鬲亘賯賷"
+msgid "OK to restore the other files."
+msgstr "丕囟睾胤 賲賵丕賮賯 賱丕爻鬲毓丕丿丞 賲賱賮丕鬲 丕禺乇賶"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "噩丕乇賷 丕賱丨爻丕亘 丕賱鬲賯乇賷亘賷"
+msgid "Please choose your keyboard layout."
+msgstr "乇噩丕亍, 丕禺鬲乇 賱賵丨丞 丕賱賲賮丕鬲賷丨."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "噩丕乇賷 丕賱鬲孬亘賷鬲"
+msgid "Printer Device URI"
+msgstr "URI 噩賴丕夭 丕賱胤丕亘毓丞"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "丕禺鬲乇 丕賱丨夭賲 丕賱鬲賷 鬲乇賷丿 鬲孬亘賷鬲賴丕"
+msgid "Not erasable media!"
+msgstr "賵爻賷胤 睾賷乇 賯丕亘賱 賱賱賲爻丨!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "鬲孬亘賷鬲 賲氐睾賾乇"
+msgid "Terminal-based"
+msgstr "Terminal-based"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "噩丕乇賷 鬲丨丿賷孬 丕禺鬲賷丕乇 丕賱丨夭賲"
+msgid "Installing a printing system in the %s security level"
+msgstr "噩丕乇賷 鬲孬亘賷鬲 賳馗丕賲 胤亘丕毓丞 賮賷 賲爻鬲賵賶 丕賱兀賲賳 %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "丨賲賾賱/丕丨賮馗 毓賱賶 賯乇氐 賲乇賳"
+msgid "The user name is too long"
+msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 胤賵賷賱 噩丿丕賸"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- 丕賱爻丕亘賯 "
+msgid "Other OS (windows...)"
+msgstr "賳馗丕賲 丌禺乇 (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "孬亘賾鬲"
+msgid "WebDAV remote site already in sync!"
+msgstr "賲賵賯毓 WebDAV 丕賱亘毓賷丿 賲鬲夭丕賲賳 賲爻亘賯丕賸!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "兀馗賴乇 丕賱丨夭賲 丕賱賲禺鬲丕乇丞 兀賱賷丕賸"
+msgid "Reading printer database..."
+msgstr "噩丕乇賷 賯乇丕亍丞 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "賱丕 賷賲賰賳賰 丕夭丕賱丞 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲丞. 賷噩亘 鬲乇賯賷鬲賴丕"
+msgid "Generate auto install floppy"
+msgstr "丕賳卮卅 賯乇氐 鬲孬亘賷鬲 丌賱賷"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"賷噩亘 鬲乇賯賷丞 賴匕賴 丕賱丨夭賲丞.\n"
-"賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 賱丕 鬲乇賷丿 丕禺鬲賷丕乇賴丕責"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "賱丕 賷賲賰賳 丕夭丕賱丞 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲. 丕賳賴丕 賲孬亘鬲丞 賲爻亘賯丕賸"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "賴匕賴 丕賱丨夭賲丞 丕賱夭丕賲賷丞, 賱丕 賷賲賰賳 毓丿賲 丕禺鬲賷丕乇賴丕"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "賱丕 賷賲賰賳賰 丕禺鬲賷丕乇/丕夭丕賱丞 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲丞"
+"\t\t 丕爻賲 丕賱賲爻鬲禺丿賲: %s\n"
+"\t\t 毓賱賶 丕賱賲爻丕乇: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "爻賷鬲賲 丨匕賮 丕賱丨夭賲 丕賱鬲丕賱賷丞"
+msgid "Somalia"
+msgstr "丕賱氐賵賲丕賱"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "爻賷鬲賲 鬲孬亘賷鬲 丕賱丨夭賲 丕賱鬲丕賱賷丞"
+msgid "No open source driver"
+msgstr "賱丕 賷賵噩丿 賲卮睾賱 賲賮鬲賵丨 丕賱賲氐丿乇"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "賱丕 賷賲賰賳賰 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲丞 賱兀賳賴 賱丕 賷賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賲鬲亘賯賷丞 賱鬲孬亘賷鬲賴丕"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"賴匕丕 賲賲丕孬賱 賱賱賲爻鬲賵賶 丕賱爻丕亘賯, 賵 賱賰賳 丕賱賳馗丕賲 賲睾賱賯 賰賱賷丕賸 賵 丕賱賲夭丕賷丕 丕賱兀賲賳賷 毓賱賶 丨丿賴丕 "
+"丕賱兀賯氐賶."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "丕賱兀賴賲賷丞: %s\n"
+msgid "Nicaragua"
+msgstr "賳賷賰丕乇丕睾賵丕"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "丕賱丨噩賲: %d 賰賷賱賵亘丕賷鬲\n"
+msgid "New Caledonia"
+msgstr "賳賷賵賰丕賱賷丿賵賳賷丕"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "丕賱廿氐丿丕乇: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "丕賱亘乇賵鬲賵賰賵賱 丕賱兀賵乇賵亘賷 (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "丕賱廿爻賲: %s\n"
+msgid "Video mode"
+msgstr "賵囟毓賷丞 丕賱賮賷丿賷賵"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "丨夭賲丞 爻賷卅丞"
+msgid "Please enter your email address below "
+msgstr "賮囟賱丕賸 兀丿禺賱 毓賳賵丕賳 亘乇賷丿賰 丕賱兀賱賰鬲乇賵賳賷 兀丿賳丕賴 "
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "兀禺乇賶"
+msgid "Oman"
+msgstr "毓賲丕賳"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "丕賱丨噩賲 丕賱廿噩賲丕賱賷: %d / %d 賲賷睾丕亘丕賷鬲"
+msgid "Network Monitoring"
+msgstr "賲乇丕賯亘丞 丕賱卮亘賰丞"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "丕賱鬲丕賱賷 ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "丕禺鬲賷丕乇 賲賮乇丿 賱賱丨夭賲"
+msgid "New size in MB: "
+msgstr "丕賱丨噩賲 丕賱噩丿賷丿 亘丕賱賲賷睾丕亘丕賷鬲: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "丕禺鬲賷丕乇 賲噩賲賵毓丕鬲 丕賱丨夭賲"
+msgid "Partition table type: %s\n"
+msgstr "賳賵毓 噩丿賵賱 丕賱鬲賯爻賷賲: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"丕賱賳馗丕賲 賱丿賷賰 賯賱賷賱 丕賱賲賵丕乇丿. 賯丿 鬲賯丕亘賱 亘毓囟 丕賱賲卮丕賰賱 賯賷 鬲孬亘賷鬲\n"
-"Mandrake Linux. 丕匕丕 丨丿孬 匕賱賰, 賷賲賰賳賰 丕賱鬲孬亘賷鬲 賮賷 賵囟毓 賳氐賷, 賱賴匕丕 丕賱睾乇囟,\n"
-"丕囟睾胤 `F1' 毓賳丿 丕賱廿賯賱丕毓 賲賳 丕賱賯乇氐 丕賱賲丿賲噩, 賵 丕賰鬲亘 `text'."
+msgid "Authentication Windows Domain"
+msgstr "鬲丨賯賯 賳胤丕賯 Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "丕丨賮馗 丕禺鬲賷丕乇 丕賱丨夭賲"
+msgid "US keyboard"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱兀賲乇賷賰賷丞"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "丌賱賷"
+msgid "Buttons emulation"
+msgstr "賲丨丕賰丕丞 丕賱兀夭乇丕乇"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "丕毓丕丿丞"
+msgid ", network printer \"%s\", port %s"
+msgstr ", 胤丕亘毓丞 卮亘賰丞 \"%s\", 丕賱賲賳賮匕 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"丕賱鬲孬亘賷鬲 丕賱丌賱賷 賯丿 賷鬲賲 亘卮賰賱 鬲賱賯丕卅賷 丕匕丕 兀乇丿鬲 匕賱賰,\n"
-"賮賷 賴匕賴 丕賱丨丕賱丞 爻賷爻鬲賵賱賷 毓賱賶 賰賱 丕賱賯乇氐 丕賱氐賱亘 賱丿賷賰!!\n"
-"(賴匕丕 亘丕賱賳爻亘丞 賱賱鬲孬亘賷鬲 毓賱賶 噩賴丕夭 丌禺乇).\n"
"\n"
-"乇亘賲丕 鬲賮囟賱 丕毓丕丿丞 毓賲賱賷丞 丕賱鬲孬亘賷鬲.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "丕賳卮卅 賯乇氐 鬲孬亘賷鬲 丌賱賷"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "丕毓丕丿丞 丕賱鬲卮睾賷賱"
+"賳卮丕胤丕鬲 Drakbackup 毓賳 胤乇賷賯 卮乇賷胤 丕賱鬲禺夭賷賳:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"亘毓囟 丕賱禺胤賵丕鬲 賱賲 賷鬲賲 鬲賰賲賱鬲賴丕.\n"
"\n"
-"賴賱 鬲乇賷丿 丕賱禺乇賵噩 丕賱丌賳 賮毓賱丕賸責"
+" 賲卮賰賱丞 賮賷 賵氐賱丞 FTP: 賱賲 賷賰賳 亘丕賱廿賲賰丕賳 丕乇爻丕賱 賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 丕賱禺丕氐丞 亘賰 "
+"亘丕爻鬲禺丿丕賲 FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "噩丕乇賷 丕賳卮丕亍 賯乇氐 丕賱鬲孬亘賷鬲 丕賱丌賱賷..."
+msgid "Sending Speed:"
+msgstr "爻乇毓丞 丕賱廿乇爻丕賱:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "兀丿禺賱 賯乇氐 賲乇賳 賮丕乇睾 賮賷 丕賱爻賵丕賯丞 %s"
+msgid "Halt bug"
+msgstr "Halt bug"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "Mail alert configuration"
+msgstr "鬲賴賷卅丞 鬲賳亘賷賴 丕賱亘乇賷丿"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "賮卮賱 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓. 馗賴乇 丕賱禺胤兀 丕賱鬲丕賱賷:"
+msgid "Tokelau"
+msgstr "鬲賵賰賱丕賵"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "噩丕乇賷 鬲孬亘賷賳 賲丨賲賾賱 丕賱廿賯賱丕毓"
+msgid "Bosnian"
+msgstr "丕賱亘賵爻賳賷丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"禺胤兀 兀孬賳丕亍 鬲孬亘賷鬲 aboot, \n"
-"丨丕賵賱 丕賱廿噩亘丕乇 毓賱賶 丕賱鬲孬亘賷鬲 丨鬲賶 賵 賱賵 兀丿賷 匕賱賰 賱鬲丿賲賷乇 丕賱鬲噩夭卅丞 丕賱兀賵賱賶責"
+msgid "Release: "
+msgstr "丕賱廿氐丿丕乇:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲 aboot責"
+msgid "Connection speed"
+msgstr "爻乇毓丞 丕賱廿鬲氐丕賱"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "噩丕乇賷 鬲丨囟賷乇 賲丨賲賾賱 丕賱廿賯賱丕毓..."
+"賮囟賱丕賸 兀丿禺賱 丕爻賲 噩賴丕夭 賳爻禺 丕賱兀賯乇丕氐\n"
+" 賲孬丕賱: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "賰賱賲丞 丕賱賲乇賵乇 賱賲丿賷乇 丕賱賳胤丕賯"
+msgid "Namibia"
+msgstr "賳丕賲賷亘賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 賱賲丿賷乇 丕賱賳胤丕賯"
+msgid "Database Server"
+msgstr "禺丕丿賲 賯賵丕毓丿 亘賷丕賳丕鬲"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "賳胤丕賯 Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "丕賲賰丕賳賷丕鬲 賲賲賷夭丞 賱賴匕丕 丕賱賲卮睾賱 (丕賲賰丕賳賷丞 丕賱賳爻禺 兀賵 丿毓賲 DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "鬲丨賯賯 賳胤丕賯 Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "賱丕 賷賲賰賳 丕囟丕賮丞 鬲噩夭卅丞 丕賱賶 RAID _丕賱賲噩賴夭_ md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "禺丕丿賲 NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "賳胤丕賯 NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "鬲丨賯賯 NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+"賷賲賰賳 賱亘胤丕賯鬲賰 丕賱鬲賲鬲毓 亘丿毓賲 賱賱鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿 賱賰賳 賮賯胤 賲毓 XFree %s, \n"
+"賱丕丨馗 兀賳 賴匕丕 丕賱丿毓賲 鬲噩乇賷亘賷 賵 賯丿 賷鬲爻亘亘 賮賷 丕賷賯丕賮 噩賴丕夭賰.\n"
+"亘胤丕賯鬲賰 賲丿毓賵賲丞 毓賳 胤乇賷賯 XFree %s 丕賱鬲賷 賷賲賰賳 兀賳 鬲賰賵賳 賲丿毓賵賲丞 亘卮賰賱 兀賮囟賱 賮賷 賵囟毓賷丞 "
+"丕賱乇爻賵賲 孬賳丕卅賷丞 丕賱兀亘毓丕丿."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "LDAP Server"
-msgstr "禺丕丿賲 LDAP"
+msgid "Please wait, setting security options..."
+msgstr "丕賳鬲馗乇 賲賳 賮囟賱賰, 噩丕乇賷 鬲毓賷賷賳 禺賷丕乇丕鬲 丕賱兀賲賳..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "睾賷乇 賲毓乇賵賮|CPH05X (bt878) [賲氐賳毓賵賳 賰孬賷乇賵賳]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "鬲丨賯賯 LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "卮睾賾賱 X-Window 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "hourly"
+msgstr "賰賱賾 爻丕毓丞 "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local files"
-msgstr "賲賱賮丕鬲 賲丨賱賷丞"
+msgid " Successfuly Restored on %s "
+msgstr " 鬲賲鬲 丕賱廿爻鬲毓丕丿丞 亘賳噩丕丨 毓賱賶 %s "
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication"
-msgstr "丕賱鬲丨賯賯"
+msgid "Making printer port available for CUPS..."
+msgstr "噩丕乇賷 噩毓賱 賲賳賮匕 丕賱胤丕亘毓丞 賲鬲賵賮乇丕賸 賱賭CUPS..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "賰賱賲丞 丕賱賲乇賵 賴匕賴 賯氐賷乇丞 噩丿丕賸 (賷噩亘 兀賳 鬲賰賵賳 %d 乇賲賵夭 毓賱賶 丕賱兀賯賱)"
+msgid "Antigua and Barbuda"
+msgstr "兀賳鬲賷睾賵丕 賵 亘丕乇亘賵丿丕"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No password"
-msgstr "賱丕 賰賱賲丞 賲乇賵乇"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! 鬲馗賴乇 丕匕丕 賰丕賳鬲 賰賱賲丞 丕賱賲乇賵乇 賮賷 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱賳馗丕賲 賲禺鬲賱賮丞\n"
+"毓賳 鬲賱賰 丕賱鬲賷 賱賯丕毓丿丞 亘賷丕賳丕鬲 禺丕丿賲 丕賱胤乇賮賷丕鬲.\n"
+"丕丨匕賮/兀毓丿 丕囟丕賮丞 丕賱賲爻鬲禺丿賲 丕賱賶 禺丕丿賲 丕賱胤乇賮賷丕鬲 賱鬲賲賰賷賳 鬲爻噩賷賱 丕賱丿禺賵賱."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "毓賷賾賳 賰賱賲丞 賲乇賵乇 丕賱賲爻鬲禺丿賲 丕賱噩匕乇"
+msgid "Spanish"
+msgstr "丕賱廿爻亘丕賳賷丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "賱賲 鬲賯賲 亘鬲賴賷卅丞 禺丕丿賲 X. 賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 鬲乇賷丿 匕賱賰責"
+msgid "Start"
+msgstr "丕亘丿兀"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "丕賱禺丿賲丕鬲: %d 賲賳卮賾胤丞 賱賭 %d 賲爻噩賱丞"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "丕賱禺丿賲丕鬲"
+msgid "Configuring applications..."
+msgstr "噩丕乇賷 廿毓丿丕丿 丕賱鬲胤亘賷賯丕鬲..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "丕賱賳馗丕賲"
+msgid "Normal modem connection"
+msgstr "賵氐賱丞 賲賵丿賲 毓丕丿賷丞"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s 毓賱賶 %s"
+msgid "File Selection"
+msgstr "丕禺鬲賷丕乇 丕賱賲賱賮丕鬲"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "賲丨賲賾賱 丕賱廿賯賱丕毓"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"賲丕 賴賷 鬲賴賷卅丞 ISDN 丕賱鬲賷 鬲賮囟賱賴丕責\n"
+"\n"
+"* 丕賱鬲賴賷卅丞 丕賱賯丿賷賲丞 鬲爻鬲禺丿賲 isdn4net. 賵 賴賷 鬲丨鬲賵賷 毓賱賶 兀丿賵丕鬲\n"
+" 賯賵賷丞 賵 賱賰賳賴丕 氐毓亘丞 丕賱鬲賴賷卅丞, 賵 睾賷乇 賯賷丕爻賷丞.\n"
+"\n"
+"* 丕賱鬲賴賷卅丞 丕賱噩丿賷丿丞 兀爻賴賱 賮賷 丕賱賮賴賲, 賵 兀賰孬乇\n"
+" 賯賷丕爻賷丞, 賵 賱賰賳 賲毓 兀丿賵丕鬲 兀賯賱.\n"
+"\n"
+"賳丨賳 賳賮囟賾賱 賱賰 丕賱鬲賴賷卅丞 丕賱禺賮賷賮丞.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "丕賱廿賯賱丕毓"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "賲毓胤賱"
+msgid "Run config tool"
+msgstr "卮睾賾賱 兀丿丕丞 丕賱鬲賴賷卅丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "賲賳卮賾胤"
+msgid "Bootloader installation"
+msgstr "鬲孬亘賷鬲 賲丨賲賱 丕賱廿賯賱丕毓"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "噩丿丕乇 賳丕乇賷"
+msgid "Root partition size in MB: "
+msgstr "丨噩賲 丕賱鬲噩夭卅丞 丕賱噩匕乇賷丞 亘丕賱賲賷睾丕亘丕賷鬲"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "丕賱兀賲賳"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "賴匕賴 丕賱丨夭賲丞 丕賱夭丕賲賷丞, 賱丕 賷賲賰賳 毓丿賲 丕禺鬲賷丕乇賴丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "賲爻鬲賵賶 丕賱兀賲賳"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO image 賴賷 %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "丕賱卮亘賰丞"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) 賴賵 禺丕丿賲 兀爻賲丕亍 賳胤丕賯 (DNS) 賵 丕賱匕賷 賷爻鬲禺丿賲 賱賲毓乇賮丞 兀爻賲丕亍 丕賱賲爻鬲囟賷賮丕鬲 "
+"兀賵 毓賳丕賵賷賳 IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "丕賱卮亘賰丞 賵 丕賱廿賳鬲乇賳鬲"
+msgid "Disconnect..."
+msgstr "丕賯胤毓 丕賱廿鬲氐丕賱..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞"
+msgid "Saint Lucia"
+msgstr "爻丕賳鬲 賱賵爻賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "丕賱毓鬲丕丿"
+msgid "Report"
+msgstr "鬲賯乇賷乇"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "亘胤丕賯丞 丕賱鬲賱賮丕夭"
+msgid "Palau"
+msgstr "亘丕賱丕賵"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丞 丕賱氐賵鬲. 丨丕賵賱 鬲卮睾賷賱 \"harddrake\" 亘毓丿 丕賱鬲孬亘賷鬲"
+msgid "level"
+msgstr "丕賱賲爻鬲賵賶"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "卮睾賾賱 \"sndconfig\" 亘毓丿 丕賱鬲孬亘賷鬲 賱鬲賴賷卅丞 亘胤丕賯丞 丕賱氐賵鬲 丕賱禺丕氐丞 亘賰"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr "賰賱 賲卮賰賱丞 爻賷鬲賲 鬲鬲亘毓賴丕 賲賳 禺亘賷乇 賵丕丨丿 賲毓鬲賲丿 賲賳 MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "賴賱 賱丿賷賰 亘胤丕賯丞 氐賵鬲 ISA責"
+msgid "Package Group Selection"
+msgstr "丕禺鬲賷丕乇 賲噩賲賵毓丕鬲 丕賱丨夭賲"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "亘胤丕賯丞 丕賱氐賵鬲"
+msgid "Restore Via Network Protocol: %s"
+msgstr "丕爻鬲毓丿 毓賳 胤乇賷賯 亘乇賵鬲賵賰賵賱 丕賱卮亘賰丞: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "禺丕丿賲 CUPS 亘毓賷丿"
+msgid "You can configure each parameter of the module here."
+msgstr "賷賲賰賳賰 鬲賴賷卅丞 賰賱 賲毓丕賲賱 賱賱賵丨丿丞 賴賳丕."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "賱丕 胤丕亘毓丞"
+msgid "Choose the resolution and the color depth"
+msgstr "丕禺鬲乇 丿賯丞 丕賱毓乇囟 賵 毓賲賯 丕賱兀賱賵丕賲"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "胤丕亘毓丞"
+msgid "Emulate third button?"
+msgstr "賲丨丕賰丕丞 丕賱夭乇 丕賱孬丕賱孬責"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "丕賱賮兀乇丞"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"賱丕 賷賲賰賳賰 丕賳卮丕亍 鬲噩夭卅丞 噩丿賷丿丞\n"
+"(賱兀賳賰 賵氐賱鬲 丕賱賶 丕賱毓丿丿 丕賱兀賯氐賶 賲賳 丕賱鬲噩夭卅丕鬲 丕賱兀爻丕爻賷丞).\n"
+"兀賵賱丕賸 丕禺匕賮 鬲噩夭卅丞 兀爻丕爻賷丞 賵 賯賲 亘廿賳卮丕亍 鬲噩夭卅丞 賲賲鬲丿丞."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "丕賱賲賳胤賯丞 丕賱夭賲賳賷丞"
+msgid "Mount"
+msgstr "丨賲賱"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨"
+msgid "Creating auto install floppy"
+msgstr "噩丕乇賷 丕賳卮丕亍 賯乇氐 丕賱鬲孬亘賷鬲 丕賱丌賱賷"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "賲賱禺氐"
+msgid "Install updates"
+msgstr "鬲孬亘賷鬲 鬲丨丿賷孬丕鬲 丕賱賳馗丕賲"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "禺丕丿賲 NTP"
+msgid "text box height"
+msgstr "丕乇鬲賮丕毓 丕賱氐賳丿賵賯 丕賱賳氐賷"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "鬲夭丕賲賳 賵賯鬲 丌賱賷 (亘丕爻鬲禺丿丕賲 NTP)"
+msgid "State"
+msgstr "丕賱丨丕賱丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "爻丕毓丞 丕賱噩賴丕夭 賲囟亘賵胤丞 毓賱賶 鬲賵賯賷鬲 睾乇賷賳鬲卮"
+msgid "Be sure a media is present for the device %s"
+msgstr "鬲兀賰丿 賲賳 賵噩賵丿 丕賱賵爻賷胤 賱賱賵丨丿丞 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "賲丕 賴賷 賲賳胤賯鬲賰 丕賱夭賲賳賷丞責"
+msgid "Enable multiple profiles"
+msgstr "鬲賲賰賷賳 丕賱鬲卮賰賷賱丕鬲 丕賱賲鬲毓丿丿丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "賴賱 鬲乇賷丿 丕賱賲丨丕賵賱丞 賲乇丞賸 兀禺乇賶責"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "賴匕賴 丕賱禺賷丕乇丕鬲 賷賲賰賳賴丕 賳爻禺 賵 丕爻鬲乇噩丕毓 賰賱 丕賱賲賱賮丕鬲 賮賷 丿賱賷賱 /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "鬲毓匕乇 丕?鬲氐丕賱 亘丕賱賲乇丌丞 %s"
+msgid "Local printer"
+msgstr "胤丕亘毓丞 賲丨賱賷丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "噩丕乇賷 丕賱廿鬲氐丕賱 亘丕賱賲乇丌丞 賱賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘丕賱丨夭賲 丕賱賲鬲賵賮乇丞..."
+msgid "Files Restored..."
+msgstr "丕賱賲賱賮丕鬲 丕賱賲爻鬲毓丕丿丞..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "丕禺鬲乇 賲乇丌丞 爻賷鬲賲 賲賳 禺賱丕賱賴丕 鬲賳夭賷賱 丕賱丨夭賲"
+msgid "Package selection"
+msgstr "丕禺鬲賷丕乇 丕賱丨夭賲"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"噩丕乇賷 丕賱廿鬲氐丕賱 亘賲賵賯毓 Mandrake Linux 賱賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘丕賱賲乇丕賷丕 丕賱賲鬲賵賮乇丞..."
+msgid "Mauritania"
+msgstr "賲賵乇賷鬲丕賳賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"鬲爻鬲胤賷毓 丕賱丌賳 鬲賳夭賷賱 丕賱丨夭賲 丕賱賲丨丿賾孬丞. 賴匕賴 丕賱丨夭賲\n"
-"鬲賲 鬲丨丿賷孬賴丕 亘毓丿 丕氐丿丕乇 丕賱鬲賵夭賷毓丞. 賯丿\n"
-"鬲丨鬲賵賷 毓賱賶 丕氐賱丕丨丕鬲 兀賲賳賷丞 兀賵 丕氐賱丕丨丕鬲 賱毓賷賵亘 亘乇賲噩賷丞.\n"
+"賷賲賰賳賳賷 丨賮馗 丕賱鬲賴賷卅丞 賵 丕賮鬲乇丕囟 兀賳賰 賯賲鬲 亘廿毓丿丕丿 禺丕丿賲 DHCP 賲爻亘賯丕賸; 賮賷 賴匕賴 丕賱丨丕賱 "
+"鬲兀賰丿 賲賳 兀賳賳賷 兀爻鬲胤賷毓 賯乇丕亍丞 丕賱卮亘賰丞 丕賱鬲賷 鬲爻鬲禺丿賲賴丕 賱賱卮亘賰丞 丕賱賲丨賱賷丞 亘卮賰賱 氐丨賷丨; "
+"爻兀賯賵賲 亘廿毓丕丿丞 鬲賴賷卅鬲賴丕 賵 賱賳 兀賯賵賲 亘兀賷 卮卅 鬲噩丕賴 鬲賴賷卅丞 禺丕丿賲 DHCP.\n"
"\n"
-"賱鬲賳夭賷賱 賴匕賴 丕賱丨夭賲, 鬲丨鬲丕噩 丕賱賶 兀賳 鬲賰賵賳 賱丿賷賰 丕鬲氐丕賱 \n"
-"亘丕賱廿賳鬲乇賳鬲.\n"
+"賲丿禺賱 DNS 丕賱廿賮鬲乇丕囟賷 賴賵 丕爻賲 丕賱禺丕丿賲 丕賱賲禺亘卅賷 毓賱賶 丕賱噩丿丕乇 丕賱賳丕乇賷. 賷賲賰賳賰 丕亘丿丕賱 匕賱賰 "
+"亘毓賳賵丕賳 IP 賱賱賭DNS 丕賱禺丕氐 亘賲賵賮乇 禺丿賲丞 丕賱廿賳鬲乇賳鬲, 賲孬賱.\n"
+"\t\t \n"
+"丕賳 賱賲 賷賰賳 匕賱賰, 賷賲賰賳賳賷 丕毓丿丕丞 鬲賴賷卅丞 丕賱賵丕噩賴丞 賵 丕毓丿丕丞 鬲賴賷卅丞 禺丕丿賲 DHCP 賱賰.\n"
"\n"
-"賴賱 鬲乇賷丿 鬲賳夭賷賱 賴匕賴 丕賱鬲丨丿賷孬丕鬲 責"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "賮囟賱丕賸 兀丿禺賱 賯乇氐 賵丨丿丕鬲 丕賱鬲丨丿賷孬 賮賷 丕賱爻賵丕賯丞 %s"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "賮囟賱丕賸 兀丿禺賱 賯乇氐 丕賱廿賯賱丕毓 丕賱匕賷 鬲爻鬲禺丿賲賴 賮賷 丕賱爻賵丕賯丞 %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "鬲賴賷卅丞 賲丕 亘毓丿 丕賱鬲孬亘賷鬲"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"噩丕乇賷 鬲孬亘賷鬲 丕賱丨夭賲丞 %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "噩丕乇賷 丕賱鬲丨囟賷乇 賱賱鬲孬亘賷鬲"
+"賱賲 賷鬲賲 丕賷噩丕丿 胤丕亘毓丞 賲丨賱賷丞! 賱鬲孬亘賷鬲 胤丕亘毓丞 賷丿賵賷丕賸 丕丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 "
+"丕賱廿丿禺丕賱 (丕賱胤丕亘毓丕鬲 丕賱賲鬲賵丕夭賷丞: /dev/lp0, /dev/lp1, ..., 賲賲丕孬賱丞 賱賭LPT1:, "
+"LPT2:, ..., 胤丕亘毓丞 USB 丕賱兀賵賱賶: /dev/usb/lp0, 胤丕亘毓丞 USB 丕賱孬丕賳賷丞: /dev/usb/"
+"lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "丕賱賯乇氐 丕賱賲丿賲噩 丕賱賲爻賲賶 \"%s\""
+msgid "All primary partitions are used"
+msgstr "賰賱 丕賱鬲噩夭卅丕鬲 丕賱乇卅賷爻賷丞 賲爻鬲禺丿賲丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"丕匕丕 賰丕賳鬲 賱丿賷賰 賯賱 丕賱兀賯乇丕氐 賮賷 丕賱賯丕卅賲丞 兀丿賳丕賴, 丕囟睾胤 賲賵丕賮賯.\n"
-"丕匕丕 賱賲 鬲賲賰賳 賱丿賷賰 兀賷 賲賳 賴匕賴 丕賱兀賯乇丕氐, 丕囟睾胤 丕賱睾丕亍.\n"
-"丕匕丕 賰丕賳鬲 亘毓囟 賴匕賴 丕賱兀賯乇丕氐 賲賮賯賵丿丞, 賯賲 亘丕夭丕賱丞 丕禺鬲賷丕乇賴丕孬賲 丕囟睾胤 賲賵丕賮賯."
+"亘毓丿 毓賲賱 匕賱賰, 賳賳氐丨 亘廿毓丕丿丞 鬲卮睾賷賱 亘賷卅丞 X 賱丿賷賰 賱鬲賮丕丿賷 兀賷 賲卮丕賰賱 鬲鬲毓賱賯 亘廿爻賲 "
+"丕賱賲爻鬲囟賷賮."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../services.pm:1
#, c-format
-msgid "All"
-msgstr "丕賱賰賱"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "鬲丨賯賯 賵 鬲賴賷卅丞 丌賱賷丞 賱賱毓鬲丕丿 毓賳丿 丕賱廿賯賱丕毓."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "鬲孬亘賷鬲 賲氐睾賾乇 賮毓賱丕賸 (禺氐賵氐丕賸 亘丿賵賳 urpmi)"
+msgid "Installation Server Configuration"
+msgstr "鬲賴賷卅丞 禺丕丿賲 丕賱孬亘賷鬲"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "賲毓 賵孬丕卅賯 丕賱賲爻丕毓丿丞 丕賱兀爻丕爻賷丞 (賲賮囟賾賱)"
+msgid "Configuring IDE"
+msgstr "噩丕乇賷 鬲賴賷卅丞 IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "With X"
-msgstr "賲毓 X"
+msgid "Network functionality not configured"
+msgstr "賱賲 賷鬲賲 鬲丨丿賷丿 賵馗賷賮賷丞 丕賱卮亘賰丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"賱賲 鬲禺鬲乇 兀賷 賲噩賲賵毓丞 賲賳 丕賱丨夭賲.\n"
-"賮囟賱丕賸 丕禺鬲乇 丕賱鬲孬亘賷鬲 丕賱賲氐睾乇 丕賱匕賷 鬲乇賷丿賴:"
+msgid "Configure module"
+msgstr "鬲賴賷卅丞 丕賱賵丨丿丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type of install"
-msgstr "賳賵毓 丕賱鬲孬亘賷鬲"
+msgid "Cocos (Keeling) Islands"
+msgstr "噩夭乇 丕賱賰賵賰賵爻"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "丕賱丨噩賲 丕賱賲禺鬲丕乇 兀賰亘乇 賲賳 丕賱賲爻丕丨丞 丕賱賲鬲賵賮乇丞"
+msgid "Disconnecting from the Internet "
+msgstr "噩丕乇賷 賯胤毓 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "兀丿禺賴賱 丕賱賯乇氐 丕賱賲乇賳 丕賱賲丨鬲賵賶 毓賱賶 丕禺鬲賷丕乇丕鬲 丕賱丨夭賲"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "爻鬲丨鬲丕噩 丕賱賶 丕毓丕丿丞 丕賱鬲卮睾賷賱 賯亘賱 兀賳 賷鬲賲 鬲賮毓賷賱 丕賱鬲毓丿賷賱丕鬲"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Loading from floppy"
-msgstr "噩丕乇賷 丕賱鬲丨賲賷賱 賲賳 丕賱賯乇氐 丕賱賲乇賳"
+msgid "Provider phone number"
+msgstr "乇賯賲 賴丕鬲賮 丕賱賲賵賮乇"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Package selection"
-msgstr "丕禺鬲賷丕乇 丕賱丨夭賲"
+msgid "Host %s"
+msgstr "丕賱賲爻鬲囟賷賮 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "丕丨賮馗 毓賱賶 賯乇氐 賲乇賳"
+msgid "Armenia"
+msgstr "兀乇賲賷賳賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "丨賲賾賱 賲賳 賯乇氐 賲乇賳"
+msgid "Fiji"
+msgstr "賮賷噩賷"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"賮囟賱丕購 丕禺鬲乇 丨賮馗 兀賵 鬲丨賲賷賱 丕禺鬲賷丕乇丕鬲賰 賱賱丨夭賲 賲賳 丕賱賯乇氐 丕賱賲乇賳.\n"
-"丕賱賳爻賯 賲卮丕亘賴 賱兀賯乇丕氐 丕賱鬲孬亘賷鬲 丕賱丌賱賷 丕賱賲乇賳丞."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "賱丕 賷賵噩丿 賮賷 賳馗丕賲賰 賲爻丕丨丞 賲鬲亘賯丞 鬲賰賮賷 賱賱鬲孬亘賷鬲 兀賵 丕賱鬲乇賯賷丞 (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "噩丕乇賷 丕賱毓孬賵乇 毓賱賶 丕賱丨夭賲 丕賱賲鬲賵賮乇丞..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 丕賱丨夭賲 丕賱鬲賷 爻鬲鬲賲 鬲乇賯賷鬲賴丕..."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "噩丕乇賷 丕賱鬲毓乇賮 毓賱賶 丕賱丨夭賲 丕賱賲孬亘鬲丞 賲爻亘賯丕賸..."
+msgid "Second floppy drive"
+msgstr "爻賵丕賯丞 丕賱賯乇氐 丕賱賲乇賳 丕賱孬丕賳賷丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 丕賱丨夭賲 丕賱賲鬲賵賮乇丞 賵 丕毓丿丕丞 亘賳丕亍 賯丕毓丿丞 亘賷丕賳丕鬲 rpm..."
+msgid "About Harddrake"
+msgstr "丨賵賱 HardDrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "賱丕 鬲賵噩丿 賲爻丕丨丞 鬲亘丿賷賱 賰丕賮賷丞 賱賱賯賷丕賲 亘丕賱鬲孬亘賷鬲, 賮囟賱丕賸 夭丿 賲爻丕丨丞 丕賱鬲亘丿賷賱"
+msgid "Drive capacity"
+msgstr "丨噩賲 丕賱爻賵丕賯丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"鬲毓匕乇 丕賱鬲兀賰丿 賲賳 氐丨丞 賳馗丕賲 丕賱賲賮丕鬲 %s. 賴賱 鬲乇賷丿 鬲氐丨賷丨 丕賱兀禺胤丕亍 (賰賳 丨匕乇丕賸, 賷賲賰賳 兀賳 "
-"鬲禺爻乇 亘賷丕賳丕鬲)"
+"兀丿禺賱 賯乇氐丕 賲乇賳丕 賮賷 丕賱爻賵丕賯丞\n"
+"賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 丕賱賯乇氐 爻鬲賲丨賶"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "鬲丨賯賯 賲賳 丕賱亘賱賵賰丕鬲 丕賱爻賷卅丞責"
+msgid "Size: %s"
+msgstr "丕賱丨噩賲: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "丕禺鬲乇 丕賱鬲噩夭卅丕鬲 丕賱鬲賷 鬲乇賷丿 鬲噩賴賷夭賴丕"
+msgid "Control and Shift keys simultaneously"
+msgstr "賲賮丕鬲賷丨 Control 賵 Shift 賮賷 賳賮爻 丕賱賵賯鬲"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "鬲丨鬲丕噩 丕賱賶 丕毓丿丕丞 丕賱鬲孬亘賷鬲 賱鬲賮毓賷賱 丕賱鬲毓丿賷賱丕鬲 毓賱賶 噩丿賵賱 丕賱鬲噩夭卅丕鬲"
+msgid "secondary"
+msgstr "孬丕賳賵賷"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "View Backup Configuration."
+msgstr "丕毓乇囟 鬲賴賷卅丞 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "丕禺鬲乇 賳賯丕胤 丕賱鬲丨賲賷賱"
+msgid "if set to yes, report check result to syslog."
+msgstr "if set to yes, report check result to syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "噩丕乇賷 毓賲賱 賲爻丨 賱賱鬲噩夭卅丕鬲 賱廿賷噩丕丿 賳賯丕胤 丕賱鬲丨賲賷賱"
+msgid "No password"
+msgstr "賱丕 賰賱賲丞 賲乇賵乇"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No partition available"
-msgstr "賱丕 鬲賵噩丿 鬲噩夭卅丞"
+msgid "Nigeria"
+msgstr "賳賷噩賷乇賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "噩丕乇賷 鬲賴賷卅丞 IDE"
+msgid "There is no existing partition to use"
+msgstr "賱丕 鬲賵噩丿 鬲噩夭卅丞 賱丕爻鬲禺丿丕賲賴丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱鬲丕賱賷丞\n"
+"\n"
+"%s\n"
+"賲鬲賵賮乇丞 賱賳馗丕賲賰.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "噩丕乇賷 鬲賴賷卅丞 亘胤丕賯丕鬲 PCMCIA..."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"賱賱胤亘丕毓丞 丕賱賶 胤丕亘毓丞 TCP 兀賵 socket, 賷噩亘 毓賱賷賰 丕毓胤丕亍 丕爻賲 丕賱賲爻鬲囟賷賮 兀賵 毓賳賵丕賳 IP "
+"丕賱禺丕氐 亘丕賱胤丕亘毓丞 賵 丕禺鬲賷丕乇賷丕賸 賷賲賰賳賰 丕囟丕賮丞 乇賯賲 賲賳賮匕 丕賱胤丕亘毓丞 (丕賱廿賮鬲乇丕囟賷 賴賵 9100). "
+"毓賱賶 禺丕丿賲丕鬲 HP JetDirect 賷賰賵賳 乇賯賲 丕賱賲賳賮匕 毓丕丿丞賸 賴賵 9100, 毓賱賶 丕賱禺丕丿賲丕鬲 丕賱兀禺乇賶 "
+"賷賲賰賳 兀賳 賷賰賵賳 丕賱乇賯賲 睾賷乇 匕賱賰. 丕賱賯 賳馗乇丞 毓賱賶 丿賱賷賱 丕賱賲爻鬲禺丿賲 賱賱毓鬲丕丿 丕賱禺丕氐 亘賰."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Hard drive information"
+msgstr "賲毓賱賵賲丕鬲 丕賱賯乇氐 丕賱氐賱亘"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "賲丨丕賰丕丞 丕賱夭乇 3"
+msgid "Russian"
+msgstr "丕賱乇賵爻賷丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "賲丨丕賰丕丞 丕賱夭乇 2"
+msgid "Jordan"
+msgstr "丕賱兀乇丿賳"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "賲丨丕賰丕丞 丕賱兀夭乇丕乇"
+msgid "Hide files"
+msgstr "禺亘卅 丕賱賲賱賮丕鬲"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱賲賳賮匕 丕賱鬲爻賱爻賱賷 丕賱賲賵氐賱丞 亘賴 丕賱賮兀乇丞"
+msgid "Auto-detect printers connected to this machine"
+msgstr "鬲丨賯賯 兀賱賷丕 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲鬲氐賱丞 亘賴匕丕 丕賱噩賴丕夭"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse Port"
-msgstr "賲賳賮匕 丕賱賮兀乇丞"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV 睾賷乇 賲孬亘賾鬲!\n"
+"\n"
+"\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 鬲賱賮丕夭 賱賰賳 賱賲 賷爻鬲胤毓 DrakX 丕賰鬲卮丕賮賴丕 (賱丕 鬲賵噩丿 賵丨丿丕鬲 bttv "
+"賵賱丕 saa7134\n"
+"賮賷 \"/etc/modules\") 兀賵 賱賲 鬲孬亘賾鬲 xawtv, 賮囟賱丕賸 賯賲 亘廿乇爻丕賱 賳鬲丕卅噩\n"
+"丕賱兀賲乇 \"lspcidrake -v -f\" 丕賱賶 \"install\\@mandrakesoft.com\"\n"
+"賲毓 丕賱毓賳賵丕賳 \"undetected TV card\".\n"
+"\n"
+"\n"
+"賷賲賰賳賰 鬲孬亘賷鬲 XawTV 亘賰鬲丕亘丞 丕賱兀賲乇 \"urpmi xawtv\" 賰賲爻鬲禺丿賲 噩匕乇 賮賷 爻胤乇 丕賱兀賵丕賲乇."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "賮囟賱丕賸 丕禺鬲乇 賳賵毓 丕賱賮兀乇丞."
+msgid "Sorry, no floppy drive available"
+msgstr "丌爻賮 , 賱丕 賲丿禺賱 賲乇賳 賲鬲丕丨"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "賲賮丕鬲丨 丕賱鬲卮賮賷乇"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bolivia"
+msgstr "亘賵賱賷賮賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "鬲乇賯賷丞 %s"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"賯賲 亘廿毓丿丕丿 禺丕丿賲 Windows 賱噩毓賱 丕賱胤丕亘毓丕鬲 賲鬲賵賮乇丞 鬲丨鬲 亘乇賵鬲賵賰賵賱 IPP 賵 賯賲 亘廿毓丿丕丿 "
+"丕賱胤亘丕毓丞 賲賳 賴匕賴 丕賱賲丕賰賷賳丞 亘丕爻鬲禺丿丕賲 賳賵毓 丕賱賵氐賱丞 \"%s\" 賮賷 Printerdrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "賴賱 賴匕丕 鬲孬亘賷鬲 兀賲 鬲乇賯賷丞責"
+msgid "Bad package"
+msgstr "丨夭賲丞 爻賷卅丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "鬲孬亘賷鬲/鬲乇賯賷丞"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"丨賵賾賱 噩賴丕夭賰 丕賱賶 禺丕丿賲 賱賷賳賰爻 賯賵賷 亘賳賯乇丕鬲 賯賱賷賱丞 賲賳 丕賱賮兀乇丞: 禺丕丿賲 賵賷亘, 亘乇賷丿, 噩丿丕乇 "
+"賳丕乇賷, 賲賵噩賾賴, 禺丕丿賲 賲賱賮丕鬲 賵 胤亘丕毓丞, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "賴丕 賴賷 賯丕卅賲丞 賰丕賲賱丞 亘賰賱 賱賵丨丕鬲 丕賱賲賮丕鬲賷丨 丕賱賲鬲賵賮乇丞"
+msgid "DrakSec Basic Options"
+msgstr "禺賷丕乇丕鬲 DrakSec 丕賱兀爻丕爻賷丞"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "乇噩丕亍, 丕禺鬲乇 賱賵丨丞 丕賱賲賮丕鬲賷丨."
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"賲賱丨賵馗丞: 丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 氐賵鬲 ISA PnP, 爻鬲丨鬲丕噩 丕賱賶 丕爻鬲禺丿丕賲 亘乇賳丕賲噩 "
+"sndconfig. 賮賯胤 毓賱賷賰 賰鬲丕亘丞 \"sndconfig\" 賮賷 爻胤乇 丕賱兀賵丕賲乇."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit"
-msgstr "禺乇賵噩"
+msgid "Romania"
+msgstr "乇賵賲丕賳賷丕"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "License agreement"
-msgstr "丕鬲賮丕賯賷丞 丕賱鬲乇禺賷氐"
+msgid "choose device"
+msgstr "丕禺鬲乇 丕賱噩賴丕夭 "
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "馗賴乇 禺胤兀"
+msgid "Canada"
+msgstr "賰賳丿丕"
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Remove from LVM"
+msgstr "丕夭丕賱丞 賲賳 LVM"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "鬲孬亘賷鬲 Mandrake Linux %s"
+msgid "Timezone"
+msgstr "丕賱賲賳胤賯丞 丕賱夭賲賳賷丞"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "賱丕 鬲賵噩丿 爻賵丕賯丞 兀賯乇丕氐 賲乇賳丞"
+msgid "German"
+msgstr "丕賱兀賱賲丕賳賷丞"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "兀賴賱丕 亘賰賲 賮賷 %s"
+msgid "Next ->"
+msgstr "丕賱鬲丕賱賷 ->"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"賱賲 賷鬲賲 鬲孬亘賷鬲 亘毓囟 丕賱丨夭賲 丕賱賲賴賲丞 亘卮賱 氐丨賷丨.\n"
-"廿賲丕 兀賳 爻賵丕賯丞 丕賱賯乇氐 丕賱賲丿賲噩 兀賵 兀賳 丕賱賯乇氐 丕賱賲丿賲噩 賳賮爻賴 亘賴 毓賷亘 賲丕.\n"
-"鬲兀賰丿 賲賳 氐丨丞 丕賱賯乇氐 丕賱賲丿賲噩 毓賱賶 賰賲亘賷賵鬲乇 賲孬亘賾鬲 亘丕爻鬲禺丿丕賲 丕賱兀賲乇 \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "賳賯胤丞 鬲丨賲賷賱 賲賰乇乇賾丞 %s"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"馗賴乇 禺胤兀 賵 賱丕 兀毓乇賮 賰賷賮 兀鬲毓丕賲賱 賲毓賴 亘兀爻賱賵亘 噩賷丿.\n"
-"鬲丕亘毓 毓賱賶 賲爻丐賵賱賷鬲賰."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "賲賳 賮囟賱賰 丕賳鬲馗乇"
+msgid "Guinea-Bissau"
+msgstr "睾賷賳賷丕-亘賷爻丕賵"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Ok"
-msgstr "賲賵丕賮賯"
+msgid "Horizontal refresh rate"
+msgstr "賳爻亘丞 丕賱廿賳毓丕卮 丕賱兀賮賯賷"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finish"
-msgstr "廿賳鬲賴丕亍"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"賱賲 賷賲賰賳 丕夭丕賱丞 鬲毓賷賷賳 賳賯胤丞 丕賱鬲丨賲賷賱 賳馗乇丕 賱兀賳 賴匕賴 丕賱鬲噩夭卅丞 賲爻鬲禺丿賲丞 賱賭loop back.\n"
+"賯賲 亘廿夭丕賱丞 丕賱賭loopback 兀賵賱丕"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Basic"
-msgstr "兀爻丕爻賷"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"賱丕 賷賲賰賳 亘丿亍 鬲賴賷卅丞 丕賱卮亘賰丞 丕賱鬲賷 鬲賲 毓賲賱賴丕 兀孬賳丕亍 丕賱鬲孬亘賷鬲 丕賱丌賳. 賮囟賱丕賸 鬲兀賰丿 丕匕丕 賰丕賳 "
+"賷賲賰賳 丕賱賵氐賵賱 丕賱賶 丕賱卮亘賰丞 亘毓丿 丕賯賱丕毓 丕賱賳馗丕賲 賵 氐丨賾丨 丕賱鬲賴賷卅丞 亘丕爻鬲禺丿丕賲 賲乇賰夭 鬲丨賰賲 "
+"Mandrake 賮賷 賯爻賲 \"丕賱卮亘賰丞 賵 丕賱廿賳鬲乇賳鬲\"/\"丕賱賵氐賱丕鬲\", 賵 亘毓丿 匕賱賰 賯賲 亘鬲賴賷卅丞 "
+"丕賱胤丕亘毓丞, 賰匕賱賰 亘丕爻鬲禺丿丕賲 賲乇賰夭 鬲丨賰賲 Mandrake 賮賷 賯爻賲 \"丕賱毓鬲丕丿\"/\"丕賱胤丕亘毓丞\""
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "賲鬲賯丿賲"
+msgid "USB controllers"
+msgstr "賲鬲丨賰賲丕鬲 USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "丕丨匕賮"
+msgid "What norm is your TV using?"
+msgstr "兀賷 賳馗丕賲 賷爻鬲禺丿賲賴 噩賴丕夭 丕賱鬲賱賮丕夭 賱丿賷賰責"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "鬲毓丿賷賱"
+msgid "Type:"
+msgstr "丕賱賳賵毓:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "丕囟丕賮丞"
+msgid "Share name"
+msgstr "丕爻賲 丕賱賲卮丕乇賰丞"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "廿禺鬲乇 賲賱賮"
+msgid "enable"
+msgstr "鬲賲賰賷賳"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"賴賳丕 賷賲賰賳賰 丕禺鬲賷丕乇 丕禺鬲氐丕乇丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲賷 \n"
-"爻鬲爻賲丨 賱賰 亘丕賱鬲亘丿賷賱 亘賷賳 賱睾丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱賲禺鬲賱賮丞\n"
-"(賲孬賱丕賸: 賱丕鬲賷賳賷 賵 睾賷乇 賱丕鬲賷賳賷)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "賲賮鬲丕丨 \"Windows\" 丕賱兀賷賲賳"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "賲賮鬲丕丨 \"Windows\" 丕賱兀賷爻乇"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "賲賮鬲丕丨 \"Menu\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "賲賮丕鬲賷丨 Alt 賵 Shift 賮賷 賳賮爻 丕賱賵賯鬲"
+"噩丕乇賷 丕賱廿鬲氐丕賱 亘賲賵賯毓 Mandrake Linux 賱賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘丕賱賲乇丕賷丕 丕賱賲鬲賵賮乇丞..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "賲賮丕鬲賷丨 Ctrl 賵 Alt 賮賷 賳賮爻 丕賱賵賯鬲"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"馗賴乇鬲 賲卮賰賱丞 兀孬賳丕亍 丕毓丕丿丞 鬲卮睾賷賱 丕賱卮亘賰丞: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "賲賮鬲丕丨 CapsLock"
+msgid "Remove the loopback file?"
+msgstr "賴賱 鬲乇賷丿 丕夭丕賱丞 賲賱賮 loopback責"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "賲賮丕鬲賷丨 Control 賵 Shift 賮賷 賳賮爻 丕賱賵賯鬲"
+msgid "Selected size is larger than available space"
+msgstr "丕賱丨噩賲 丕賱賲禺鬲丕乇 兀賰亘乇 賲賳 丕賱賲爻丕丨丞 丕賱賲鬲賵賮乇丞"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "賲賮鬲丕丨賷賾 Shift 賮賷 賳賮爻 丕賱賵賯鬲"
+msgid "NCP server name missing!"
+msgstr "丕爻賲 禺丕丿賲 NCP 賲賮賯賵丿!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "賲賮鬲丕丨 Alt 丕賱兀賷賲賳"
+msgid "Please choose your country."
+msgstr "賮囟賱丕賸 丕禺鬲乇 亘賱丿賰."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "丕賱賷賵睾賵爻賱丕賮賷丞 (賱丕鬲賷賳賷)"
+msgid "Hard Disk Backup files..."
+msgstr "賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賱賱賯乇氐 丕賱氐賱亘..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "丕賮賷鬲賳丕賲賷丞 \"氐賮 乇賯賲賷\" QWERTY"
+msgid "Laotian"
+msgstr "丕賱賱丕賵爻賷丞"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "賱賵丨丞 賲賮丕鬲賷丨 兀賲乇賷賰賷丞 (丿賵賱賷)"
+msgid "Samoa"
+msgstr "爻丕賲賵丕"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱兀賲乇賷賰賷丞"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"亘乇賵鬲賵賰賵賱 rstat 賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 毓賱賶 丕賱卮亘賰丞 亘丕爻鬲乇噩丕毓\n"
+"丕丨氐丕卅賷丕鬲 丌丿丕亍 兀賷 噩賴丕夭 毓賱賶 賴匕賴 丕賱卮亘賰丞."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱亘乇賷胤丕賳賷丞"
+msgid "Re-generating list of configured scanners ..."
+msgstr "噩丕乇賷 丕毓丕丿丞 鬲賵賱賷丿 賯丕卅賲丞 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲毓丿賾丞 ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "丕賱兀賵賰乇丕賳賷丞"
+msgid "Scanner"
+msgstr "丕賱賲丕爻丨 丕賱囟賵卅賷"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "丕賱鬲乇賰賷丞 (胤乇丕夭 \"Q\" 丕賱丨丿賷孬)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "鬲丨匕賷乇: 丕禺鬲亘丕乇 亘胤丕賯丞 丕賱毓乇囟 賴匕賴 賯丿 賷鬲爻亘 賮賷 丕賷賯丕賮 噩賴丕夭賰"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "丕賱鬲賾乇賰賷丞 (胤乇丕夭 \"F\" 丕賱鬲賯賱賷丿賷)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 賷噩亘 兀賳 賷丨鬲賵賷 賮賯胤 毓賱賶 丕賱丨乇賵賮 丕賱氐睾賷乇丞, 丕賱兀乇賯丕賲, `-' 賵 `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱胤丕噩賷賰賷丞"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲丕賷賱丕賳丿賷丞"
+msgid "Welcome To Crackers"
+msgstr "賲乇丨亘丕 亘丕賱賲禺鬲乇賯賷賳"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "丕賱鬲丕賲賷賱 (丌賱丞 賰丕鬲亘丞)"
+msgid "Module options:"
+msgstr "禺賷丕乇丕鬲 丕賱賵丨丿丞:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "丕賱鬲丕賲賷賱 (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "丕賱氐乇亘賷丞 (爻賷乇賷賱賷)"
+msgid "Go on without configuring the network"
+msgstr "鬲丕亘毓 丿賵賳 鬲賴賷卅丞 丕賱卮亘賰丞"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "丕賱爻賱賵賮丕賰賷丞 (QWERTY)"
+msgid "Abort"
+msgstr "廿賳賴丕亍"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "丕賱爻賱賵賮丕賰賷丞 (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "賱丕 賷賵噩丿 胤賱亘 賰賱賲丞 爻乇 賮賷 %s 毓賱賶 丕賱賲賳賮匕 %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "丕賱爻賱賵賮賷賳賷丞"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 丕爻鬲禺丿丕賲 噩賴丕夭 睾賷乇 賯丕亘賱 賱賱乇噩賵毓 丕賱賶 丕賱禺賱賮."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "丕賱爻賵賷丿賷丞"
+msgid "Usage of remote scanners"
+msgstr "丕爻鬲禺丿丕賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱亘毓賷丿丞"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "丕賱乇賾賵爻賷丞 (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-丕賱賯乇氐 丕賱賲丿賲噩.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "丕賱乇賵爻賷丞"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "丕賱乇賵賲丕賳賷丞 (qwertz)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (賳乇賵賷噩賷丞賾)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "丕賱乇賵賲丕賳賷丞 (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "丕賱鬲賯丿賲 賮賷 賳爻禺 丕賱賯乇氐 丕賱氐賱亘..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "丕賱賰賳丿賷賾丞 (賰賷亘賷賰)"
+msgid "Unable to fork: %s"
+msgstr "鬲毓匕乇 鬲賳賮賷匕: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "丕賱亘乇鬲睾丕賱賷丞"
+msgid "Type: "
+msgstr "丕賱賳賵毓: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "丕賱亘賵賱賳丿賷丞 (qwertz layout)"
+msgid "<-- Edit Client"
+msgstr "<-- 鬲丨乇賷乇 丕賱毓賲賷賱"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "丕賱亘賵賱賳丿賷丞 (qwerty layout)"
+msgid "no fonts found"
+msgstr "賱丕 鬲賵噩丿 禺胤賵胤"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "丕賱賳乇賵賷噩賷丞"
+msgid "Mouse"
+msgstr "丕賱賮兀乇丞"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "丕賱賴賵賱賳丿賷丞"
+msgid "not enough room in /boot"
+msgstr "賱丕 鬲賵噩丿 賲爻丕丨賵 賰丕賮賷丞 賮賷 /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "丕賱賲丕賱胤賷丞 (兀賲乇賷賰丕)"
+msgid "Choosing an arbitratry driver"
+msgstr "噩丕乇賷 丕禺鬲賷丕乇 賲卮睾賱 毓丕賲"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "丕賱賲丕賱胤賷丞 (亘乇賷胤丕賳賷丕)"
+msgid "Host name"
+msgstr "丕爻賲 丕賱賲爻鬲囟賷賮"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "丕賱賲賳睾賵賱賷丞 (爻賷乇賷賱賷丞)"
+msgid "Liechtenstein"
+msgstr "賱賷卮鬲賳卮鬲丕賷賳"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "賲賷丕賳賲丕乇 (丕賱亘賵乇賲賷丞)"
+msgid "the color of the progress bar"
+msgstr "賱賵賳 卮乇賷胤 丕賱鬲賯丿賲"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "丕賱賲賯丿賵賳賷丞"
+msgid "Suppress Fonts Files"
+msgstr "兀亘胤賱 賲賱賮丕鬲 丕賱禺胤賵胤"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "丕賱賲丕賱丕賷丕賱丕賲"
+msgid "Add to RAID"
+msgstr "丕囟丕賮丞 丕賱賶 RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "丕賱賱丕鬲賮賷丞"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "丕賱賱賷鬲賵丕賳賷丞 \"氐賵鬲賷\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "鬲賲鬲 丕囟丕賮丞 丕賱胤丕亘毓丞 \"%s\" 丕賱賶 Star Office/OpenOffice.org/GIMP 亘賳噩丕丨."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "丕賱賱賷鬲賵丕賳賷丞 \"氐賮 乇賯賲賷\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "賱丕 鬲賵噩丿 爻賵丕賯丞 賯乇氐 賲乇賳!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "丕賱賱賷鬲賵丕賳賷丞 AZERTY (噩丿賷丿)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"賱賱賲毓乇賮丞 丨賵賱 丕賱禺賷丕乇丕鬲 丕賱賲鬲賵賮乇丞 賱賱胤丕亘毓丞 丕賱丨丕賱賷丞, 廿賲丕 兀賳 鬲賯乇兀 丕賱賯丕卅賲丞 兀丿賳丕賴 賵 "
+"丕賳賯乇 \"賯丕卅賲丞 禺賷丕乇丕鬲 丕賱胤丕亘毓丞\".%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "丕賱賱賷鬲賵丕賳賷丞 AZERTY (賯丿賷賲)"
+msgid "Continue anyway?"
+msgstr "賴賱 鬲乇賷丿 丕賱丕賰賲丕賱 毓賱賶 兀賷 丨丕賱責"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "丕賱賱丕賵爻賷丞"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"丕匕丕 賱賲 鬲賰賳 胤丕亘毓鬲 賲賵噩賵丿丞 賮賷 丕賱賯丕卅賲丞, 賮囟賱丕賸 丕禺鬲乇 胤丕亘毓丞 賲鬲賵丕賮賯丞 (丕賳馗乇 丿賱賷賱 "
+"丕賱胤丕亘毓丞) 兀賵 丕禺鬲乇 胤丕亘毓丞 賲賲丕孬賱丞."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "丕賱兀賲乇賷賰賷丞 丕賱賱丕鬲賷賳賷丞"
+msgid "Printer"
+msgstr "胤丕亘毓丞"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱賰賵乇賷丞"
+msgid "Saudi Arabia"
+msgstr "丕賱爻毓賵丿賷丞"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "丕賱賷丕亘丕賳賷丞 106 賲賮丕鬲賷丨"
+msgid "Internet"
+msgstr "丕賱廿賳鬲乇賳鬲"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "丕賷賳賵賰鬲賷鬲賵鬲"
+msgid "Some devices were added:\n"
+msgstr "鬲賲鬲 丕囟丕賮丞 亘毓囟 丕賱毓鬲丕丿:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "丕賱廿賷胤丕賱賷丞"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "丕賱賴賳丿爻丞: %s 丕爻胤賵丕賳丞, %s 乇兀爻, %s 賯胤丕毓\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "丕賱丌賷爻賱丕賳丿賷丞"
+msgid "Printing on the printer \"%s\""
+msgstr "噩丕乇賷 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丞 \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "丕賱廿賷乇丕賳賷賾丞"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow 賵 /etc/hosts.deny 賲毓丿賾丕賳 賲爻亘賯丕賸 - 賱賲 賷鬲賲 丕賱鬲睾賷賷乇"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "丕賱毓亘乇賷丞 (氐賵鬲賷丞)"
+msgid "Restore From Tape"
+msgstr "丕爻鬲毓丕丿丞 賲賳 丕賱卮乇賷胤"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "丕賱毓亘乇賷丞"
+msgid "Choose the profile to configure"
+msgstr "丕禺鬲乇 丕賱鬲卮賰賷賱 丕賱匕賷 鬲乇賷丿 鬲賴賷卅鬲賴"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "丕賱賰乇賵丕鬲賷丞"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"兀丿禺賱 丕爻賲 賲爻鬲囟賷賮 Zeroconf 亘丿賵賳 兀賷 賳賯丕胤 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿\n"
+"丕爻鬲禺丿丕賲 丕爻賲 丕賱賲爻鬲囟賷賮 丕賱廿賮鬲乇丕囟賷."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "丕賱賲噩乇賷丞"
+msgid "Backup Now from configuration file"
+msgstr "賯賲 亘丕賱賳爻禺 丕賱丌賳 賲賳 賲賱賮 丕賱鬲賴賷卅丞"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "睾賵乇賲賵賰賴賷"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "賳賯丕 丕賱鬲丨賲賷賱 賷噩亘 兀賳 鬲丨鬲賵賷 賮賯胤 毓賱賶 丕賱丨乇賵賮 賵/兀賵 丕賱丌乇賯丕賲"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "睾賵噩丕乇丕鬲賷"
+msgid "Restarting printing system..."
+msgstr "噩丕乇賷 丕毓丕丿丞 鬲卮睾賷賱 賳馗丕賲 丕賱胤亘丕毓丞..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "丕賱賷賵賳丕賳賷丞"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "丕賱噩賵乇噩賷丞賾 (丕賱鬲氐賲賷賲 丕賱賱丕鬲賷賳賷)"
+msgid "See hardware info"
+msgstr "毓乇囟 賲毓賱賵賲丕鬲 丕賱毓鬲丕丿"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "丕賱噩賵乇噩賷丞 (丕賱鬲氐賲賷賲 丕賱乇賵爻賷)"
+msgid "First sector of boot partition"
+msgstr "丕賱賯胤丕毓 丕賵賱 賲賳 鬲噩夭卅丞 丕賱廿賯賱丕毓"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "丕賱賮乇賳爻賷丞"
+msgid "Printer manufacturer, model"
+msgstr "賲氐賳賾毓 丕賱胤丕亘毓丞, 丕賱胤乇丕夭"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "丕賱賮賳賱賳丿賷丞"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "丕賱廿爻亘丕賳賷丞"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "丕賱廿爻鬲賵賳賷丞"
+msgid "Subnet Mask:"
+msgstr "Subnet Mask:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (爻賵賷丿賷丞)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "鬲賲 鬲孬亘賷鬲 爻賲丕鬲 LiLo 賵 Bootsplash 亘賳噩丕丨"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (賳乇賵賷噩賷丞賾)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"丕賱賲毓丕賲賱丕賳 丕賱賲賴賲丕賳 噩丿丕 賴賲丕 賳爻亘丞 丕賱廿賳毓丕卮 丕賱兀賮賯賷, 賵 賴賷 丕賱賳爻亘丞 丕賱鬲賷\n"
+"賷鬲賲 賮賷賴丕 丕賳毓丕卮 丕賱卮丕卮丞 賰丕賲賱丞, 賵 丕賱兀賴賲 賴賵 賳爻亘丞 丕賱鬲夭丕賲賳 丕賱兀賮賯賷\n"
+"賵 丕賱鬲賷 賮賷 禺賱丕賱賴丕 賷鬲賲 毓乇囟 禺胤賵胤 丕賱賲爻丨.\n"
+"\n"
+"賲賳 *丕賱賲賴賲 噩丿丕* 兀賳 賱丕 鬲丨丿丿 賳賵毓 卮丕卮丞 賲毓 賲鬲賵爻胤 鬲夭丕賲賳\n"
+"兀賰亘乇 賲賳 賲賯丿乇丞 卮丕卮鬲賰 賱兀賳賰 亘賴匕丕 賯丿 鬲丿賲乇 卮丕卮鬲賰.\n"
+" 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕 賷賲賰賳賰 丕禺鬲賷丕乇 丕毓丿丕丿丕鬲 毓丕丿賷丞."
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak鈥 (US)"
+msgid "Modify"
+msgstr "鬲毓丿賷賱"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "丕賱丿賳賲丕乇賰賷丞"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"丕賱兀賵丕賲乇 \"%s\" 賵 \"%s\" 鬲爻賲丨 賱賰 亘鬲毓丿賷賱 丕毓丿丕丿丕鬲 丕賱禺賷丕乇丕鬲 賱賵馗賷賮丞 胤亘丕毓丞 賲丨丿丿丞. "
+"亘亘爻丕胤丞 賯賲 亘廿囟丕賮丞 丕賱廿毓丿丕丿 丕賱賲胤賱賵亘 丕賱賶 爻胤乇 丕賱丌賵丕賲乇, 賲孬丕賱 \"%s <file>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "丿賷賮丕賳睾丕乇賷"
+msgid "Need hostname, username and password!"
+msgstr "賷購丨鬲丕噩 丕賱賶 丕爻賲 丕賱賲爻鬲囟賷賮 賵 丕爻賲 丕賱賲爻鬲禺丿賲 賵 賰賱賲丞 丕賱賲乇賵乇!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "丕賱兀賱賲丕賳賷丞 (賱丕 賲賮丕鬲賷丨 賲賷鬲丞)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV 賴賵 亘乇鬲賵賰賵賱 賷爻賲噩 賱賰 亘鬲丨賲賷賱 丿賱賷賱 賮賷 禺丕丿賲 丕賱賵賷亘 亘卮賰賱\n"
+"賲丨賱賷, 賵 賲毓丕賲賱鬲賴 賰賳馗丕賲 賲賱賮丕鬲 賲丨賱賷 (賷噩亘 兀賳 賷賰賵賳 禺丕丿賲 丕賱賵賷亘 賲毓丿賾\n"
+"賰禺丕丿賲 WebDAV). 丕匕丕 賰賳鬲 鬲乇賷丿 丕囟丕賮丞 賳賯丕胤 鬲丨賲賷賱\n"
+"WebDAV, 丕禺鬲乇 \"噩丿賷丿\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "丕賱兀賱賲丕賳賷丞"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "丕賱鬲卮賷賰賷丞 (QWERTY)"
+msgid "new"
+msgstr "噩丿賷丿"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "丕賱鬲卮賷賰賷丞 (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "賴賱 鬲乇賷丿 丕賱賲丨丕賵賱丞 賲乇丞賸 兀禺乇賶責"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "丕賱爻賵賷爻乇賷丞 (鬲氐賲賷賲 賮乇賳爻賷)"
+msgid "Wizard"
+msgstr "丕賱賲毓丕賱噩"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "丕賱爻賵賷爻乇賷丞 (鬲氐賲賷賲 兀賱賲丕賳賷)"
+msgid "Edit selected server"
+msgstr "丨乇乇 丕賱禺丕丿賲 丕賱賲禺鬲丕乇"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "丕賱亘賷賱丕乇賵爻賷丞"
+msgid "Please choose where you want to backup"
+msgstr "乇噩丕亍 丕禺鬲乇 兀賷賳 鬲乇賷丿 丕賱賳爻禺 丕賱丕丨鬲賷丕胤賷."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "丕賱亘賵爻賳賷丞"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "鬲丨鬲丕噩 丕賱賶 丕毓丿丕丞 丕賱鬲孬亘賷鬲 賱鬲賮毓賷賱 丕賱鬲毓丿賷賱丕鬲 毓賱賶 噩丿賵賱 丕賱鬲噩夭卅丕鬲"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "丕賱亘乇丕夭賷賱賷丞 (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "賱丕 鬲爻鬲禺丿賲 匕丕賰乇丞 丕賱賲鬲氐賮丨 丕賱賲禺亘卅賷丞"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "丕賱亘賱睾丕乇賷丞 (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "賲賳 賮囟賱賰 丕禺鬲乇 鬲氐賲賷賲 賱賵丨丞 賲賮丕鬲賷丨賰"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "丕賱亘賱睾丕乇賷丞 (氐賵鬲賷丞)"
+msgid "Standard"
+msgstr "丕賱賯賷丕爻賷"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "丕賱亘賳睾丕賱賷丞"
+msgid "Please choose your mouse type."
+msgstr "賮囟賱丕賸, 丕禺鬲乇 賳賵毓 丕賱賮兀乇丞 丕賱禺丕氐丞 亘賰."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "丕賱亘賱噩賷賰賷丞"
+msgid "Connect..."
+msgstr "丕鬲氐賱..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "丕賱兀匕乇亘賷噩丕賳賷丞 (賱丕鬲賷賳賷)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "鬲毓匕乇鬲 鬲賴賷卅丞 丕賱胤丕亘毓丞 \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "丕賱毓乇亘賷丞"
+msgid "not configured"
+msgstr "睾賷乇 賲毓丿賾"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "丕賱兀乇賲賷賳賷丞 (氐賵鬲賷)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "丕賱兀乇賲賷賳賷丞 (丌賱丞 賰丕鬲亘丞)"
+msgid "About"
+msgstr "丨賵賱"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "丕賱兀乇賲賷賳賷丞 (賯丿賷賲)"
+msgid "Proxies configuration"
+msgstr "丕毓丿丕丿丕鬲 丕賱亘乇賵賰爻賷"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "丕賱兀賱亘丕賳賷丞賾"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "丕賱亘賵賱賳丿賷丞"
+msgid "Start: sector %s\n"
+msgstr "丕賱亘丿丕賷丞: 賯胤丕毓 %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "賵丕噩賴丞 丕賱卮亘賰丞 賲毓丿賾丞 賲爻亘賯丕!"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "夭賷賲亘丕亘賵賷"
+msgid "Couldn't access the floppy!"
+msgstr "鬲毓匕乇 丕賱賵氐賵賱 丕賱賶 丕賱賯乇氐 丕賱賲乇賳!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "夭丕賲亘賷丕"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "噩丕乇賷 丕賱廿鬲氐丕賱 亘賲毓丕賱噩 Bugzilla ..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "噩賳賵亘 兀賮乇賷賯賷丕 "
+msgid "Mail Server"
+msgstr "禺丕丿賲 亘乇賷丿"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "氐乇亘賷丕"
+msgid "Please click on a partition"
+msgstr "賮囟賱丕 丕囟睾胤 毓賱賶 鬲噩夭卅丞"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "賲丕賷賵鬲"
+msgid "Linux"
+msgstr "賱賷賳賰爻"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "丕賱賷賲賳"
+msgid "Have a nice day!"
+msgstr "賳鬲賲賳賶 賱賰 賷賵賲丕賸 爻毓賷丿丕賸!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "爻丕賲賵丕"
+msgid "across Network"
+msgstr "毓亘乇 丕賱卮賾亘賰丞"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "賵丕賱賷爻 賵 賮賵鬲賵賳丕"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "賮丕賳丕鬲賵"
+msgid "Upgrade %s"
+msgstr "鬲乇賯賷丞 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "賮賷賷鬲賳丕賲"
+msgid "Select Printer Connection"
+msgstr "丕禺鬲乇 賵氐賱丞 丕賱胤丕亘毓丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "丕賱噩夭乇 丕賱毓匕乇丕亍 (丕賱賵賱丕賷丕鬲 丕賱賲鬲丨丿丞)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "囟賷胤 賯賳賵丕鬲 丕賱鬲賱賮丕夭 賮賷 鬲賯丿賲 ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "丕賱噩夭乇 丕賱毓匕乇丕亍 (亘乇賷胤丕賳賷丕)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"禺胤兀 兀孬賳丕亍 丕乇爻丕賱 丕賱賲賱賮 毓賷乇 FTP.\n"
+" 賮囟賱丕賸 賯賲 亘鬲氐丨賷丨 丕毓丿丕丿丕鬲 FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "賮賷賳夭賵賷賱丕"
+msgid "IP Range Start:"
+msgstr "IP Range Start:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "爻丕賳鬲 賮賷賳爻賳鬲 賵 丕賱睾乇賷賳丕丿賷賳"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"賲乇丕賯亘 丕賱廿賳鬲乇賳鬲 丕賱兀爻丕爻賷 (賷爻賲賶 毓丕丿丞賸 亘賭 inetd) 賷亘丿兀\n"
+"賲噩賲賵毓丞 賲賳 禺丿賲丕鬲 丕賱廿賳鬲乇賳鬲 丕賱兀禺乇賶 毓賳丿 丕賱丨丕噩丞. 丕賳賴 賲爻丐賵賱 毓賳 亘丿亍\n"
+"丕賱毓丿賷丿 賲賳 丕賱禺丿賲丕鬲, 亘賲丕 賮賷賴丕 telnet, ftp, rsh, 賵 rlogin. 鬲毓胤賷賱 inetd 爻賷毓胤賱\n"
+"賰賱 丕賱禺丿賲丕鬲 丕賱賲匕賰賵乇丞."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "丕賱賮丕鬲賷賰丕賳"
+msgid "the height of the progress bar"
+msgstr "丕乇鬲賮丕毓 卮乇賷胤 丕賱鬲賯丿賲"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "兀賵夭亘賰爻鬲丕賳"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- 丕丨賮馗 毓亘乇 %s 毓賱賶 丕賱賲爻鬲囟賷賮: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "兀賵乇賵睾賵丕賷"
+msgid "Argentina"
+msgstr "丕賱兀乇噩賳鬲賷賳 "
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "噩夭乇 丕賱賵賱丕賷丕鬲 丕賱賲鬲丨丿丞"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "兀賵睾賳丿丕"
+msgid "Domain Name Server"
+msgstr "禺丕丿賲 丕爻賲 丕賱賳胤丕賯"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "兀賵賰乇丕賳賷丕"
+msgid "Security Level:"
+msgstr "賲爻鬲賵賶 丕賱兀賲賳:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "鬲賳夭丕賳賷丕"
+msgid "Mount points must begin with a leading /"
+msgstr "賷噩亘 兀賳 鬲亘丿兀 賳賯丕胤 丕賱鬲丨賲賷賱 亘丕賱毓賱丕賲丞 /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "鬲丕賷賵丕賳"
+msgid "Postfix Mail Server"
+msgstr "禺丕丿賲 丕賱亘乇賷丿 Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "鬲賵賮丕賱賵"
+msgid "Quit without saving"
+msgstr "丕賱禺乇賵噩 亘丿賵賳 丕賱丨賮馗"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "鬲乇賷賳賷丕丿 賵 鬲賵亘丕噩賵"
+msgid "Yemen"
+msgstr "丕賱賷賲賳"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "鬲乇賰賷丕"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "賴匕丕 丕賱賲賳鬲噩 賲鬲賵賮乇 毓賱賶 賲賵賯毓 MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "鬲賵賳噩賵"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕賱丨噩賲 丕賱兀賯氐賶\n"
+" 丕賱賲爻賲賵丨 亘賴 賱賭Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "鬲賵賳爻"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> There are many things to choose from (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "鬲乇賰賲丕賳爻鬲丕賳"
+msgid "Hard drive detection"
+msgstr "丕賱鬲丨賯賯 賲賳 丕賱兀賯乇丕氐 丕賱氐賱亘丞"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "鬲賷賲賵乇 丕賱卮乇賯賷丞"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"賱賲 鬲禺鬲乇 兀賷 賲噩賲賵毓丞 賲賳 丕賱丨夭賲.\n"
+"賮囟賱丕賸 丕禺鬲乇 丕賱鬲孬亘賷鬲 丕賱賲氐睾乇 丕賱匕賷 鬲乇賷丿賴:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "鬲賵賰賱丕賵"
+msgid "Please enter the WebDAV server URL"
+msgstr "乇噩丕亍 兀丿禺賱 毓賳賵丕賳 禺丕丿賲 WebDav"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "胤丕噩賰爻鬲丕賳"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "鬲丕賷賱丕賳丿"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "鬲賵噩賵"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "賲賳丕胤賯 噩賳賵亘 賮乇賳爻丕"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "鬲卮丕丿"
+msgid "Accept"
+msgstr "丕賯亘賱"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "噩夭乇 丕賱鬲乇賰 賵 丕賱賰丕賷賰賵爻"
+msgid "Description"
+msgstr "丕賱賵氐賮"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "爻賵丕夭賷賱丕賳丿"
+msgid "Error opening %s for writing: %s"
+msgstr " 賮鬲丨丞 丕賱禺胤廿 %s 賱賱賰鬲丕亘丞 :%s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "爻賵乇賷丞"
+msgid "Mouse type: %s\n"
+msgstr "賳賵毓 丕賱賮兀乇丞: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "丕賱爻賱賮丕丿賵乇"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "賷賲賰賳 賱亘胤丕賯鬲賰 丕賱丨氐賵賱 毓賱賶 丿毓賲 賱賱鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿 賲毓 XFree %s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "爻丕賵 鬲賵賲賷 賵 丕賱亘乇賷賳爻賷亘"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "賮囟賱丕賸 丕禺鬲乇 賲爻丕丨丞 賵爻賷胤 CD/DVD (亘丕賱賲賷睾丕亘丕賷鬲)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "爻賵乇賷賳丕賲"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "丕賱氐賵賲丕賱"
+msgid "Expert Area"
+msgstr "賲賳胤賯丞 丕賱禺亘乇丕亍"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "丕賱爻賳睾丕賱"
+msgid "Choose a monitor"
+msgstr "廿禺鬲乇 卮丕卮丞"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "爻丕賳 賲丕乇賷賳賵"
+msgid "Empty label not allowed"
+msgstr "睾賷乇 賲爻賲賵丨 亘丕賱毓賱丕賲丕鬲 丕賱賮丕乇睾丞"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "爻賷乇丕賱賷賵賳"
+msgid "Maltese (UK)"
+msgstr "丕賱賲丕賱胤賷丞 (亘乇賷胤丕賳賷丕)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "爻賱賵賮丕賰賷丕"
+msgid "I can't add any more partition"
+msgstr "賱丕 賷賲賰賳賳賷 丕囟丕賮丞 兀賷 鬲噩夭卅丞 兀禺乇賶"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "噩夭乇 爻賮丕賱亘丕乇丿 賵 噩丕賳 賲丕賷賳"
+msgid "Size in MB: "
+msgstr "丕賱丨噩賲 亘丕賱賷睾丕亘丕賷鬲: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "爻賱賵賮賷賳賷丕"
+msgid "Remote printer"
+msgstr "胤丕亘毓丞 亘毓賷丿丞"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "爻丕賳鬲 賴賷賱丕賳丞"
+msgid "Please choose a language to use."
+msgstr "乇噩丕亍 丕禺鬲乇 賱睾丞 丕賱丕爻鬲禺丿丕賲."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "爻賳睾丕賮賵乇丞"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"鬲丨匕賷乇: 鬲賲鬲 鬲賴賷卅丞 賴匕丕 丕賱噩賴丕夭 爻丕亘賯丕賸 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲.\n"
+"亘賰賱 亘爻丕胤丞 丕賯亘賱 兀賳 鬲購亘賯賷 賴匕丕 丕賱噩賴丕夭 賲毓丿賾.\n"
+"鬲毓丿賷賱 丕賱丨賯賵賱 兀丿賳丕賴 爻賷睾賷賾乇 賴匕賴 丕賱鬲賴賷卅丞."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "丕賱爻賵丿丕賳"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "賷賲賰賳 丕毓丿丕丿 噩賴丕夭賰 賱鬲爻噩賷賱 丕賱丿禺賵賱 丌賱賷丕賸 賱賲爻鬲禺丿賲 賲毓賷賳."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "噩夭乇 爻賷卮賱"
+msgid "Floppy format"
+msgstr "賳爻賯 丕賱賯乇氐 丕賱氐賱亘"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "噩夭乇 爻賱賷賲丕賳"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "丕賱爻毓賵丿賷丞"
+msgid "Generic Printers"
+msgstr "胤丕亘毓丕鬲 毓丕丿賷丞 (Generic)"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "乇賵丕賳丿丕"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕賱胤丕亘毓丞 丕賱鬲賷 賷噩亘 兀賳 鬲匕賴亘 丕賱賷賴丕 賵馗丕卅賮 丕賱胤亘丕毓丞 兀賵 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 "
+"賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "乇賵爻賷丕"
+msgid "The scanners on this machine are available to other computers"
+msgstr "丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞 賲鬲賵賮乇丞 賱賱丨賵丕爻賷亘 丕賱兀禺乇賶"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "乇賵賲丕賳賷丕"
+msgid "First sector of the root partition"
+msgstr "丕賱賯胤丕毓 丕賱兀賵賱 賲賳 丕賱鬲噩夭卅丞 丕賱噩匕乇賷丞"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "乇賷賵賳賷賵賳"
+msgid "Alternative drivers"
+msgstr "賲卮睾賱丕鬲 亘丿賷賱丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "賯胤乇"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"賮囟賱丕賸 賯賲 亘丕賱鬲兀卮賷乇 毓賱賶 丕賱禺賷丕乇丕鬲 丕賱鬲賷 鬲丨鬲丕噩賴丕.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "亘丕賱丕賵"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "丕賱亘丕乇噩賵丕賷"
+msgid "Cape Verde"
+msgstr "賰賷亘 賮賷乇丿賷"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "丕賱亘乇鬲睾丕賱"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "丕匕丕 賰丕賳 丕賱賲毓丕賱噩 賱丿賷賴 Cyrix 6x86 Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "賮賱爻胤賷賳"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr "賲毓丕賱噩丕鬲 pentium 丕賱賯丿賷賲丞 賰丕賳鬲 鬲鬲賵賯賮 毓賳 丕賱毓賲賱 毓賳丿 丕爻鬲禺丿丕賲 丕賱賰賵丿 F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "亘賵乇鬲賵乇賷賰賵"
+msgid "Guam"
+msgstr "睾賵丕賲"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "亘賷鬲賰丕賷乇賳"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕賱賲賳賮匕 丕賱賲鬲氐賱丞 亘賴 丕賱胤丕亘毓丞 兀賵 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "爻丕賳鬲 亘賷賷乇 賵 賲賷賰賷賱賵賳"
+msgid "/Options/Test"
+msgstr "/禺賷丕乇丕鬲/丕禺鬲亘丕乇"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "亘賵賱賳丿丕"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"賷噩亘 丕爻鬲禺丿丕賲 賴匕丕 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 亘丨匕乇. 賮賴賵 賷噩毓賱 賳馗丕賲賰 兀爻賴賱 賮賷 丕賱廿爻鬲禺丿丕賲,\n"
+"賱賰賳 賷賲賵賳 丨爻丕爻丕賸 噩丿丕賸. 賱匕丕 賱丕 賷噩亘 丕爻鬲禺丿丕賲賴 賱賲丕賰賷賳丞 賲鬲氐賱丞 亘賲丕賰賷賳丕鬲 兀禺乇賶\n"
+"兀賵 丕賱賶 丕賱廿賳鬲乇賳鬲. 賱丕 賷賵噩丿 丿禺賵賱 亘賰賱賲丞 丕賱賲乇賵乇."
-#: ../../lang.pm:1
+# y, c-format
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "亘丕賰爻鬲丕賳"
+msgid "Mounting partition %s"
+msgstr "噩丕乇賷 鬲丨賲賷賱 丕賱鬲噩夭卅丞 %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "丕賱賮賷賱賷亘賷賳"
+msgid "User name"
+msgstr "丕爻賲 丕賱賲爻鬲禺丿賲"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "亘丕亘賵丕 睾賷賳賷丕 丕賱噩丿賷丿丞"
+msgid "New configuration (isdn-light)"
+msgstr "廿毓丿丕丿 噩丿賷丿 (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "亘賵賱賷賳賷爻賷丕 丕賱賮乇賳爻賷丞"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "亘賷乇賵"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "兀賷 鬲噩夭卅丞 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕 賲賳 兀噩賱 Linux4Win"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "亘賳賲丕"
+msgid "Backup system"
+msgstr "賳馗丕賲 丕賱賲爻丕毓丿"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "毓賲丕賳"
+msgid "Test pages"
+msgstr "氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "賳賷賵夭賷賱賳丿丕"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"賯丕卅賲丞 丕賱亘賷丕賳丕鬲 丕賱鬲賷 爻賷鬲賲 丕爻鬲乇噩丕毓賴丕:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "賳賷賵賷"
+msgid "Checking %s"
+msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "賳丕賵乇賵"
+msgid "TCP/Socket Printer Options"
+msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "賳賷亘丕賱"
+msgid "Card mem (DMA)"
+msgstr "Card mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "賳賷賰丕乇丕睾賵丕"
+msgid "France"
+msgstr "賮乇賳爻丕"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "賳賷噩賷乇賷丕"
+msgid "browse"
+msgstr "丕爻鬲毓乇囟"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "噩夭賷乇丞 賳賵乇賮賵賱賰"
+msgid "Checking installed software..."
+msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 丕賱亘乇丕賲噩 丕賱賲孬亘賾鬲丞..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "丕賱賳賷噩乇"
+msgid "Remote printer name missing!"
+msgstr "丕爻賲 丕賱胤丕亘毓丞 丕賱亘毓賷丿丞 賲賮賯賵丿!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "賳賷賵賰丕賱賷丿賵賳賷丕"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丕鬲 賮賷 丕賱卮亘賰丞 丕賱賲丨賱賷丞責\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "賳丕賲賷亘賷丕"
+msgid "Turkey"
+msgstr "鬲乇賰賷丕"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "賲賵夭賲亘賷賯"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "賲丕賱賷夭賷丕"
+msgid "Number of buttons"
+msgstr "毓丿丿 丕賱兀夭乇丕乇"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "丕賱賲賰爻賷賰"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "丕賮賷鬲賳丕賲賷丞 \"氐賮 乇賯賲賷\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "賲丕賱丕賵賷"
+msgid "Module"
+msgstr "賵丨丿丞"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "噩夭乇 丕賱賲丕賱丿賷賮"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"亘丕賱廿囟丕賮丞 丕賱賶 匕賱賰, 賮廿賳 丕賱氐賮賵賮 丕賱鬲賷 賱賲 賷鬲賲 毓賲賱賴丕 亘賴匕丕 丕賱亘乇賳丕賲丨 兀賵 \"foomatic-"
+"configure\" 賱丕 賷賲賰賳 賳賯賱賴丕."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "賲賵乇賷卮賷賵爻"
+msgid "Hardware"
+msgstr "丕賱毓鬲丕丿"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "賲丕賱胤丞"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "賲賮丕鬲賷丨 Ctrl 賵 Alt 賮賷 賳賮爻 丕賱賵賯鬲"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "賲賵賳鬲爻賷乇丕鬲"
+msgid "United States"
+msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲丨丿丞"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "賲賵乇賷鬲丕賳賷丕"
+msgid "Default OS?"
+msgstr "賳馗丕賲 丕賱鬲卮睾賷賱 丕賱丕賮鬲乇丕囟賷責"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "賲丕乇鬲賷賳賷賰"
+msgid "Swiss (German layout)"
+msgstr "丕賱爻賵賷爻乇賷丞 (鬲氐賲賷賲 兀賱賲丕賳賷)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "噩夭乇 賲丕乇賷丕賳丕 丕賱卮賲丕賱賷丞"
+msgid "Configure all heads independently"
+msgstr "丕毓丿丕丿 賰賱 丕賱乇丐賵爻 亘卮賰賱 賲爻鬲賯賱"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "賲賳睾賵賱賷丕"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕賱胤丕亘毓丞 丕賱鬲賷 鬲乇賷丿 丕毓丿丕丿賴丕. 丕毓丿丕丿 賴匕賴 丕賱胤丕亘毓丞 爻賷毓賲賱 丌賱賷丕賸. 丕賳 賱賲 賷鬲賲 "
+"丕賰鬲卮丕賮 丕賱胤丕亘毓丞 亘丕賱卮賰賱 丕賱氐丨賷丨 兀賵 丕匕丕 賰賳鬲 鬲賮囟賱 鬲賴賷卅丞 賷丿賵賷丞 卮睾賱 \"鬲賴賷卅丞 賷丿賵賷丞\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "賲賷丕賳賲丕乇"
+msgid "NTP Server"
+msgstr "禺丕丿賲 NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "賲丕賱賷"
+msgid "Load/Save on floppy"
+msgstr "丨賲賾賱/丕丨賮馗 毓賱賶 賯乇氐 賲乇賳"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "賲賯丿賵賳賷丕"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "賴匕賴 丕賱爻賲丞 賱賷爻 賱賴丕 bootsplash 賮賷 %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "噩夭乇 賲丕乇卮丕賱"
+msgid "nice"
+msgstr "馗乇賷賮"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "賲丿睾卮賯乇"
+msgid "Leaving in %d seconds"
+msgstr "爻鬲鬲賲 丕賱賲睾丕丿乇丞 賮賷 %d 孬賵丕賳"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "賲賵賱丿賵賮丕"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱賲賳賮匕 丕賱鬲爻賱爻賱賷 丕賱賲乇鬲亘胤 亘賴 丕賱賲賵丿賲 賱丿賷賰."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "賲賵賳丕賰賵"
+msgid "Country"
+msgstr "丕賱亘賱丿"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "丕賱賲睾乇亘"
+msgid "Property"
+msgstr "丕賱禺丕氐賷丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "賱賷亘賷丕"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "賱丕鬲賮賷丕"
+msgid "LAN Configuration"
+msgstr "廿毓丿丕丿 LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "賱賵賰爻賲亘賵乇睾"
+msgid "Ghana"
+msgstr "睾丕賳丕"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "賱賷鬲賵丕賳賷丕"
+msgid "Path or Module required"
+msgstr "賷購丨鬲丕噩 丕賱賶 賲爻丕乇 兀賵 賵丨丿丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "賱賷爻賵鬲賵"
+msgid "Advanced Options"
+msgstr "禺賷丕乇丕鬲 賲鬲賯丿賲丞"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "賱賷亘乇賷丕"
+msgid "Coma bug"
+msgstr "Coma bug"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "爻乇賷賱丕賳賰丕"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "賱賷卮鬲賳卮鬲丕賷賳"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"亘胤丕賯丞 丕賱乇爻賵賲\n"
+"\n"
+" 亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 賷賯賵賲 亘丕賰鬲卮丕賮 賵 鬲賴賷卅丞 丕賱亘胤丕賯丞 丕賱賲賵噩賵丿丞 毓賱賶 賳馗丕賲賰\n"
+"亘卮賰賱 丌賱賷. 丕賳 賱賲 賷丨氐賱 匕賱賰, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱亘胤丕賯丞 丕賱鬲賷 賱丿賷賰 亘丕賱賮毓賱\n"
+"賲賳 丕賱賯丕卅賲丞.\n"
+"\n"
+" 賮賷 丨丕賱 丕匕丕 賰丕賳鬲 賴賳丕賰 禺丕丿賲丕鬲 乇爻賵賲賷丞 賲禺鬲賱賮丞 賱亘胤丕賯鬲賰, 賲毓 兀賵 亘丿賵賳\n"
+"鬲爻乇賷毓 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿, 賷賲賰賳賰 賮賷 賴匕賴 丕賱丨丕賱 丕禺鬲賷丕乇 丕賱禺丕丿賲 丕賱匕賷\n"
+"賷賳丕爻亘 丕丨鬲賷丕噩丕鬲賰 兀賰孬乇."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "爻丕賳鬲 賱賵爻賷丕"
+msgid "There was an error installing packages:"
+msgstr "賰丕賳 賴賳丕賰 禺胤兀 賮賷 鬲孬亘賷鬲 丕賱丨夭賲:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "賱亘賳丕賳"
+msgid "Lexmark inkjet configuration"
+msgstr "廿毓丿丕丿 Lexmark Inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "賱丕賵爻"
+msgid "Undo"
+msgstr "鬲乇丕噩毓"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "賰丕夭丕禺爻鬲丕賳"
+msgid "Save partition table"
+msgstr "丨賮馗 噩丿賵賱 丕賱鬲賯爻賷賲"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "噩夭乇 賰丕賷賲丕賳"
+msgid "Finnish"
+msgstr "丕賱賮賳賱賳丿賷丞"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "丕賱賰賵賷鬲"
+msgid "Macedonia"
+msgstr "賲賯丿賵賳賷丕"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "賰賵乇賷丕"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"丕賱賲卮丕乇賰丞 賱賰賱 賲爻鬲禺丿賲 鬲爻鬲禺丿賲 丕賱賲噩賲賵毓丞 \"fileshare\".\n"
+"賷賲賰賳賰 兀賳 鬲爻鬲禺丿賲 userdrake 賱廿囟丕賮丞 賲爻鬲禺丿賲 賮賷 賴匕賴 丕賱賲噩賲賵毓丞."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "賰賵乇賷丕 丕賱卮賲丕賱賷丞"
+msgid "Slovenian"
+msgstr "丕賱爻賱賵賮賷賳賷丞"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "爻丕賳鬲 賰賷鬲爻 賵 賳賷賮賷爻"
+msgid "Libya"
+msgstr "賱賷亘賷丕"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "噩夭乇 丕賱賯賲乇"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "噩丕乇賷 廿毓丿丕丿 丕賱賳氐賵氐 丕賱亘乇賲噩賷丞 賵 鬲孬亘賷鬲 丕賱亘乇賲噩賷丕鬲 賵 亘丿亍 丕賱禺丿賲丕鬲..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "賰賷乇賷亘丕鬲賷"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- 丕賳爻禺 丕賱賶 賯乇氐 賲丿賲噩"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "賰賲亘賵丿賷丕"
+msgid "Table"
+msgstr "丕賱噩丿賵賱"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "賯賷乇睾賷夭爻鬲丕賳"
+msgid "I don't know how to format %s in type %s"
+msgstr "賱丕 兀毓乇賮 賰賷賮 兀噩賴夭 %s 賮賷 丕賱賳賵毓 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "賰賷賳賷丕"
+msgid "Model"
+msgstr "丕賱胤乇丕夭"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "丕賱賷丕亘丕賳"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "丕賱兀乇丿賳"
+msgid "Stop Server"
+msgstr "兀賵賯賮 丕賱禺丕丿賲"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "噩丕賲丕賷賰丕"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"丕禺鬲乇 爻賲丞\n"
+"Lilo 賵 bootsplash,\n"
+"賷賲賰賳賰 丕禺鬲賷丕乇賴賲\n"
+"亘卮賰賱 賲賳賮氐賱"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "丌賷爻賱賳丿丕"
+msgid "Modem"
+msgstr "丕賱賲賵丿賲"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "丕賷乇丕賳"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "丕賱毓乇丕賯"
+msgid "Tuvalu"
+msgstr "鬲賵賮丕賱賵"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "賲賳胤賯丞 噩夭乇 丕賱賲丨賷胤 丕賱賴丕丿賷 丕賱亘乇賷胤丕賳賷丞"
+msgid "Use auto detection"
+msgstr "丕爻鬲禺丿賲 丕賱鬲丨賯賯 丕賱丌賱賷"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "丕賱賴賳丿"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"賷賯賵賲 GPM 亘廿囟丕賮丞 丿毓賲 丕賱賮兀乇丞 賱鬲胤亘賷賯丕鬲 賱賷賳賰爻 賮賷 丕賱賵囟毓 丕賱賳氐賷 賲孬賱\n"
+"Midnight Commander. 丕囟丕賮丞 丕賱賶 匕賱賰 賮廿賳賴 賷爻賲丨 亘毓賲賱賷丕鬲 丕賱賯氐 賵 丕賱賱氐賯 賮賷 爻胤乇 "
+"丕賱兀賵丕賲乇,\n"
+"賰賲丕 賷鬲囟賲賳 丿毓賲 丕賱賯賵丕卅賲 丕賱賲禺鬲氐乇丞 賮賷 爻胤乇 丕賱兀賵丕賲乇."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "丕爻乇丕卅賷賱"
+msgid "Started on boot"
+msgstr "賷鬲賲 亘丿亍賴 毓賳丿 丕賱廿賯賱丕毓"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "兀賷乇賱賳丿丕"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"丕賱鬲丨賯 亘賮乇賷賯 丕賱丿毓賲 丕賱賮賳賷 賮賷 MandrakeSoft 賵 賲噩鬲賲毓 賱賷賳賰爻 毓賱賶 丕賱廿賳鬲乇賳鬲 賱賲卮丕乇賰丞 "
+"賲毓賱賵賲丕鬲賰 賵 賲爻丕毓丿丞 丕賱丌禺乇賷賳 亘兀賳 鬲氐亘丨 禺亘賷乇丕賸 賲毓鬲賲賻丿丕賸 賮賷 賲賵賯毓賳丕 賱賱丿毓賲 丕賱賮賳賷 毓賱賶 "
+"丕賱廿賳鬲乇賳鬲:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "丕賳丿賵賳賷爻賷丕"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"賷賲賰賳 鬲毓賷賷賳 丕賱禺賷丕乇丕鬲 丕賱鬲丕賱賷丞 賱鬲禺氐賷氐\n"
+"兀賲賳 丕賱賳馗丕賲. 丕匕丕 賰賳鬲 鬲丨鬲丕噩 丕賱賶 賲夭賷丿 賲賳 丕賱卮乇丨, 丕賱賯 賳馗乇丞 毓賱賶 丕賱賲爻丕毓丿丞.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "丕賱賲噩乇"
+msgid "Automatically find available printers on remote machines"
+msgstr "丕毓孬乇 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 丌賱賷丕賸"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "賴丕賷鬲賷"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- 丕丨賮馗 丕賱賶 丕賱卮乇賷胤 毓賱賶 丕賱噩賴丕夭: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "賰乇賵丕鬲賷丕"
+msgid "East Timor"
+msgstr "鬲賷賲賵乇 丕賱卮乇賯賷丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "賴賳丿賵乇丕爻"
+msgid "Del profile..."
+msgstr "丕丨匕賮 丕賱鬲卮賰賷賱..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "噩夭乇 賴賷乇丿 賵 賲丕賰丿賵賳丕賱丿"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "賴賵賳噩 賰賵賳噩"
+msgid "Installing Foomatic..."
+msgstr "噩丕乇賷 鬲孬亘賷鬲 Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "丕賱氐賷賳"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "賷乇噩賶 鬲爻噩賷賱 丕賱禺乇賵噩 孬賲 丕爻鬲禺丿賲 Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "睾賵賷丕賳丕"
+msgid "detected"
+msgstr "鬲賲 丕賰鬲卮丕賮賴"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "睾賷賳賷丕-亘賷爻丕賵"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "賷噩亘 丕毓丕丿丞 鬲卮睾賷賱 丕賱卮亘賰丞. 賴賱 鬲乇賷丿 丕毓丕丿丞 鬲卮睾賷賱賴丕 責"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "睾賵丕賲"
+msgid "Package: "
+msgstr "丕賱噩夭賲丞: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "睾賵丕鬲賷賲丕賱丕"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "鬲毓匕乇鬲 賰鬲丕亘丞 /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "噩賵噩賷丕 丕賱噩賳賵亘賷丞 賵 噩夭乇 爻丕賳丿賵賷鬲卮 丕賱噩賳賵亘賷丞"
+msgid "SECURITY WARNING!"
+msgstr "鬲丨匕賷乇 兀賲賳賷!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "睾賷賳賷丕 丕賱廿爻鬲賵丕卅賷丞"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "睾賵丕丿賷賱賵亘"
+msgid "No, I don't want autologin"
+msgstr "賱丕, 賱丕 兀乇賷丿 丿禺賵賱丕 兀賱賷丕"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "睾賷賳賷丕"
+msgid "Windows Migration tool"
+msgstr "兀丿丕丞 丕賱廿賳鬲賯丕賱 賲賳 Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "睾丕賲亘賷丕"
+msgid "All languages"
+msgstr "賰賱 丕賱賱睾丕鬲"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "睾乇賷賳賱丕賳丿"
+msgid "Removing %s"
+msgstr "噩丕乇賷 丕夭丕賱丞 %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "噩亘賱 胤丕乇賯"
+msgid "Testing your connection..."
+msgstr "噩丕乇賷 丕禺鬲亘丕乇 丕賱賵氐賱丞..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "睾丕賳丕"
+msgid "Cache size"
+msgstr "丨噩賲 丕賱匕丕賰乇丞 丕賱賲禺亘卅賷丞"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "睾賵賷丕賳丕 丕賱賮乇賳爻賷丞"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr "賰賱賲丕鬲 丕賱賲乇賵乇 賲賲賰賾賳丞 丕賱丌賳, 賱賰賳 丕賱丕爻鬲禺丿丕賲 賰丨丕爻亘 賮賷 卮亘賰丞 賷夭丕賱 睾賷乇 賲賮囟賾賱."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "噩賵乇噩賷丕"
+msgid "Start sector: "
+msgstr "賯胤丕毓 丕賱亘丿丕賷丞: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "毓乇賷賳丕丿丕"
+msgid "Congo (Brazzaville)"
+msgstr "丕賱賰賵賳睾賵 亘乇丕夭丕賮賷賱"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "丕賱賲賲賱賰丞 丕賱賲鬲丨丿丞"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "丕賱丨夭賲丞 %s 賷噩亘 兀賳 鬲購孬亘賾鬲. 賴賱 鬲乇賷丿 鬲孬亘賷鬲賴丕責"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "丕賱睾丕亘賵賳"
+msgid "Seychelles"
+msgstr "噩夭乇 爻賷卮賱"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "噩夭乇 丕賱賮賷乇賵"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"賯丕賲 Printerdrake 亘賲賯丕乇賳丞 丕爻賲 丕賱胤乇丕夭 丕賱賳丕鬲噩 毓賳 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 賲毓 "
+"丕賱胤乇丕夭丕鬲 丕賱賲賵噩賵丿丞 賮賷 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲 賱賱丨氐賵賱 毓賱賶 兀賮囟賱 鬲賵丕賮賯. 賴匕丕 "
+"丕賱廿禺鬲賷丕乇 賯丿 賷賰賵賳 禺丕胤卅丕賸, 禺氐賵氐丕賸 丕匕丕 賰丕賳鬲 丕賱胤丕亘毓丞 睾賷乇 賲賵噩賵丿丞 丕胤賱丕賯丕賸 賮賷 賯丕毓丿丞 "
+"亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲. 賱匕丕 鬲兀賰丿 丕匕 賰丕賳 丕禺鬲賷丕乇賰 氐丨賷丨丕賸 賵 丕賳賯乇 \"丕賱胤乇丕夭 氐丨賷丨\", 兀賲丕 "
+"丕賳 賱賲 賷賰賳 丕賱胤丕夭 氐丨賷丨丕賸, 丕賳賯乇 \"丕禺鬲乇 丕賱胤乇丕夭 賷丿賵賷丕賸\" 賰賷 賷鬲爻賳賶 賱賰 丕禺鬲賷丕乇 胤乇丕夭 "
+"胤丕亘毓鬲賰 賷丿賵賷丕賸 毓賱賶 丕賱卮丕卮丞 丕賱鬲丕賱賷丞.\n"
+"\n"
+"賱胤丕亘毓鬲賰 賵噩丿 Printerdrake:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "賲賷賰乇賵賳賷夭賷丕"
+msgid "Bad password on %s"
+msgstr "賰賱賲丞 賲乇賵乇 爻賷卅丞 毓賱賶 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "噩夭乇 賮賵賰賱丕賳丿"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"鬲賵噩丿 胤丕亘毓丞 睾賷乇 賲毓乇賵賮丞 賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "賮賷噩賷"
+msgid "Zambia"
+msgstr "夭丕賲亘賷丕"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "賮賳賱賳丿丕"
+msgid "Security Administrator (login or email)"
+msgstr "賲丿賷乇 丕賱賳馗丕賲 (丕爻賲 丕賱丿禺賵賱 兀賵 丕賱亘乇丿賷 丕賱兀賱賰鬲乇賵賳賷)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "丕孬賷賵亘賷丕"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "丌爻賮賵賳, 賳丨賳 賳丿毓賲 丕氐丿丕乇丕鬲 丕賱賳賵丕丞 2.4"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "兀爻亘丕賳賷丕"
+msgid "Romanian (qwerty)"
+msgstr "丕賱乇賵賲丕賳賷丞 (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "丕乇賷鬲乇賷丕"
+msgid "Under Devel ... please wait."
+msgstr "鬲丨鬲 丕賱鬲胤賵賷乇 ... 丕賳鬲馗乇 賮囟賱丕"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "丕賱氐丨乇丕亍 丕賱睾乇亘賷丞"
+msgid "Czech Republic"
+msgstr "噩賲賴賵乇賷丞 丕賱鬲卮賷賰"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "賲氐乇"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "丕爻鬲賵賳賷丕"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "丕賱廿賰賵丕丿賵乇"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "丕賱噩夭丕卅乇"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "噩賲賴賵乇賷丞 丕賱丿賵賲賷賳賷賰丕賳"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "丿賵賲賷賳賷賰丕"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "丕賱丿賳賲丕乇賰"
+msgid "Old configuration (isdn4net)"
+msgstr "廿毓丿丕丿 賯丿賷賲 (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "噩賷亘賵鬲賷"
+msgid "Sound card"
+msgstr "亘胤丕賯丞 丕賱氐賵鬲"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "賯亘乇氐"
+msgid "Import Fonts"
+msgstr "丕爻鬲賷乇丕丿 丕賱禺胤賵胤"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "噩夭乇 丕賱賰乇賷爻賲丕爻"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"賱丿賷賰 鬲噩夭卅丞 Microsofr Windows 賰亘賷乇丞.\n"
+"丕賯鬲乇丨 兀賳 鬲睾賷乇 丨噩賲 賴匕賴 丕賱鬲噩夭卅丞\n"
+"(丕囟睾胤 毓賱賷賴丕 孬賲 丕禺鬲乇 \"鬲睾賷賷乇 丕賱丨噩賲\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "賰賷亘 賮賷乇丿賷"
+msgid "Suppress Temporary Files"
+msgstr "兀亘胤賱 丕賱賲賱賮丕鬲 丕賱賲丐賯鬲丞"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "賰賵亘丕"
+msgid "Change partition type"
+msgstr "睾賷乇 賳賵毓 丕賱鬲噩夭卅丞"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "賰賵賱賵賲亘賷丕"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"丿賯丞 丕賱毓乇囟\n"
+"\n"
+" 賷賲賰賳賰 丕禺鬲賷丕乇 丿賯丞 丕賱毓乇囟 賵 毓賲賯 丕賱兀賱賵丕賳 賮賷 丕賱丨丿賵丿\n"
+"丕賱賲鬲賵賮乇丞 賱賱毓鬲丕丿. 丕禺鬲乇 鬲賱賰 丕賱鬲賷 鬲賳丕爻亘 丕丨鬲賷丕噩丕鬲賰 (賱丕 鬲夭丕賱\n"
+"鬲爻鬲胤賷毓 鬲睾賷賷乇 鬲賱賰 丕賱禺賷丕乇丕鬲 亘毓丿 丕賱鬲孬亘賷鬲). 賷鬲賲 毓乇囟 毓賷賳丞\n"
+"賲賳 丕賱鬲賴賷卅丞 丕賱賲禺鬲丕乇丞 毓賱賶 丕賱卮丕卮丞."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "丕賱賰丕賲賷乇賵賳"
+msgid "Network Options"
+msgstr "禺賷丕乇丕鬲 卮亘賰丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "鬲卮賷賱賷"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"丕毓乇囟 丕賱爻賲丕鬲\n"
+"賮賷 爻胤乇 丕賱兀賵丕賲乇"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "噩夭乇 丕賱賰賵賰"
+msgid "Statistics"
+msgstr "丕丨氐丕卅賷丕鬲"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "賰賵鬲 丿賷賮賵丕乇"
+msgid "(on %s)"
+msgstr "(毓賱賶 %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "丕賱爻賵賷爻乇賷丞"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "丕賱賰賵賳睾賵 亘乇丕夭丕賮賷賱"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr "賲賰鬲亘丞 鬲丨賲賷 賲賳 賴噩賲丕鬲 buffer overflow 賵 format string"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "噩賲賴賵乇賷丞 賵爻胤 兀賮乇賷賯賷丞"
+msgid "average"
+msgstr "賲鬲賵爻胤"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "丕賱賰賵賳睾賵 賰賷賳卮丕爻丕"
+msgid "New printer name"
+msgstr "丕爻賲 丕賱胤丕亘毓丞 丕賱噩丿賷丿丞"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "噩夭乇 丕賱賰賵賰賵爻"
+msgid "Equatorial Guinea"
+msgstr "睾賷賳賷丕 丕賱廿爻鬲賵丕卅賷丞"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "賰賳丿丕"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "亘賷賱賷夭"
+msgid "Build Backup"
+msgstr "丕亘賳賷 丕賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "乇賵爻賷丕 丕賱亘賷囟丕亍"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr "賱胤亘丕毓丞 賲賱賮 賲賳 爻胤乇 丕賱兀賵丕賲乇 丕爻鬲禺丿賲 丕賱兀賲乇 \"%s <file> 兀賵 \"%s <file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "亘賵鬲爻賵丕賳丕"
+msgid "Currently, no alternative possibility is available"
+msgstr "丨丕賱賷丕賸 賱丕 賷賵噩丿 丕丨鬲賲丕賱 亘丿賷賱"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "噩夭賷乇丞 亘賵賮賷賴"
+msgid "Romanian (qwertz)"
+msgstr "丕賱乇賵賲丕賳賷丞 (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "亘賵鬲丕賳"
+msgid "Write Config"
+msgstr "丕賰鬲亘 丕賱廿毓丿丕丿丕鬲"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "噩夭乇 丕賱亘丕賴丕賲丕"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"賲乇丕賯亘 routed 賷爻賲丨 亘鬲丨丿賷孬 噩丿賵賱 賲賵噩賴 IP 丕賱丌賱賷 (IP router table) 毓賳 胤乇賷賯\n"
+"亘乇賵鬲賵賰賵賱 RIP. 亘賷賳賲丕 賷爻鬲禺丿賲 RIP 毓賱賶 丕賱卮亘賰丕鬲 丕賱氐睾賷乇丞, 鬲丨鬲丕噩 丕賱卮亘賰丕鬲 丕賱兀賰亘乇\n"
+"丕賱賶 亘乇賵鬲賵賰賵賱丕鬲 鬲賵噩賷賴 賲毓賯丿丞 兀賰孬乇."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "丕賱亘乇丕夭賷賱"
+msgid "Kiribati"
+msgstr "賰賷乇賷亘丕鬲賷"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "亘賵賱賷賮賷丕"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "爻賱胤賳丞 亘乇賵賳丕賷"
+msgid "Browse"
+msgstr "丕爻鬲毓乇囟"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "亘乇賲賵丿丕"
+msgid "CDROM"
+msgstr "丕賱賯乇氐 丕賱賲丿賲噩"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "亘賳賷賳"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "賴賱 鬲乇賷丿 兀賳 鬲丨丕賵賱 兀賳 鬲鬲氐賱 亘丕賱廿賳鬲乇賳鬲 丕賱丌賳責"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "亘賵乇賵賳丿賷"
+msgid "Belgian"
+msgstr "丕賱亘賱噩賷賰賷丞"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "丕賱亘丨乇賷賳"
+msgid "Do you have an ISA sound card?"
+msgstr "賴賱 賱丿賷賰 亘胤丕賯丞 氐賵鬲 ISA責"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "亘賱睾丕乇賷丕"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"賱賲 賷鬲賲 丕賰鬲卮丕賮 兀賷 賲賵丕卅賲 卮亘賰丞 丕賷孬乇賳鬲 毓賱賶 賳馗丕賲賰.\n"
+"賱丕 賷賲賰賳賳賷 丕毓丿丕丿 賳賵毓 丕賱廿鬲氐丕賱 賴匕丕."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "亘賵乇賰賷賳丕賮丕爻賵"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "亘賳睾賱丕丿賷卮"
+msgid "Can't make screenshots before partitioning"
+msgstr "賱丕 賷賲賰賳賳賷 睾賲賱 賱賯胤丕鬲 賱賱卮丕卮丞 賯亘賱 丕賱鬲噩夭卅丞"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "亘丕乇亘丕丿賵爻"
+msgid "Host Name"
+msgstr "丕爻賲 丕賱賲爻鬲囟賷賮"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "丕賱亘賵爻賳丞 賵 丕賱賴乇爻賰"
+msgid "/File/Save _As"
+msgstr "/賲賱賮/丨賮馗 _亘丕爻賲"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "兀匕乇亘賷噩丕賳"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"賱賱賵氐賵賱 丕賱賶 丕賱胤丕亘毓丕鬲 毓賱賶 禺丕丿賲丕鬲 CUPS 丕賱亘毓賷丿丞 賮賷 卮亘賰鬲賰 丕賱賲丨賱賷丞 鬲丨鬲丕噩 賮賯胤 丕賱賶 "
+"鬲卮睾賷賱 禺賷丕乇 \"丕毓孬乇 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲鬲賵賮乇丞 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞\"; 爻鬲賯賵賲 "
+"禺丕丿賲丕鬲 CUPS 亘廿毓賱丕賲 賲丕賰賷賳鬲賰 毓賳 丕賱胤丕亘毓丕鬲 丕賱賲賵噩賵丿丞 賱丿賷賴丕. 賰丕賮丞 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲賲 "
+"丕賱鬲毓乇賮 毓賱賷賴丕 賲賳 賯賽亘賱 賲丕賰賷賳鬲賰 賲賵噩賵丿丞 賮賷 賯爻賲 \"丕賱胤丕亘毓丕鬲 丕賱亘毓賷丿丞\" 毓賱賶 賳丕賮匕丞 "
+"Printerdrake 丕賱乇卅賷爻賷丞. 丕匕丕 賱賲 鬲賰賳 禺丕丿賲丕鬲 CUPS 賮賷 卮亘賰鬲賰 丕賱賲丨賱賷丞, 賮毓賱賷賰 兀賳 "
+"鬲賯賵賲 亘廿丿禺丕賱 毓賳丕賵賷賳 IP 賵 兀乇賯丕賲 丕賱賲賳丕賮匕 (丕禺鬲賷丕乇賷) 賱賱丨氐賵賱 毓賱賶 賲毓賱賵賲丕鬲 丕賱胤丕亘毓丕鬲 "
+"賲賳 丕賱禺丕丿賲丕鬲."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "兀乇賵亘丕"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s 睾賷乇 賲賵噩賵丿 賮賷 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞, 賴賱 鬲乇賷丿 鬲賴賷卅鬲賴 賷丿賵賷丕賸責"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "兀賵爻鬲乇丕賱賷丕"
+msgid "Delay before booting default image"
+msgstr "鬲賵賯賷鬲 賲丕 賯亘賱 丕賯賱丕毓 丕賱氐賵乇丞 丕賱丕賮鬲乇丕囟賷丞"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "爻丕賲賵丕 丕賱兀賲乇賷賰賷丞"
+msgid "Restrict command line options"
+msgstr "鬲卮丿賷丿 禺賷丕乇丕鬲 爻胤乇 丕賱兀賵丕賲乇"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "丕賱兀乇噩賳鬲賷賳 "
+msgid "East Europe"
+msgstr "兀賵乇賵亘賾丕 丕賱卮賾乇賯賷賾丞"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "丕賱賯胤亘 丕賱噩賳賵亘賷"
+msgid "Use free space"
+msgstr "丕爻鬲毓賲賱 丕賱賲爻丕丨丞 丕賱賮丕乇睾丞"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "兀賳睾賵賱丕"
+msgid "use dhcp"
+msgstr "丕爻鬲禺丿賲 dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "兀賳鬲賷賱 賴賵賱賳丿丕"
+msgid "Mail alert"
+msgstr "鬲賳亘賷丞 亘乇賷丿賷"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "兀乇賲賷賳賷丕"
+msgid "Internet configuration"
+msgstr "丕毓丿丕丿丕鬲 丕賱廿賳鬲乇賳鬲"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "兀賱亘丕賳賷丕"
+msgid "Uzbekistan"
+msgstr "兀賵夭亘賰爻鬲丕賳"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "兀賳睾賵賷賱丕"
+msgid "Detected %s"
+msgstr "鬲賲 丕賱鬲丨賯賯 賲賳 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "兀賳鬲賷睾賵丕 賵 亘丕乇亘賵丿丕"
+msgid "/Autodetect _printers"
+msgstr "/鬲丨賯賯 丌賱賷 賲賳 丕賱_胤丕亘毓丕鬲"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "丕賱廿賲丕乇丕鬲 丕賱毓乇亘賷丞 丕賱賲鬲丨丿丞"
+msgid "Finish"
+msgstr "廿賳鬲賴丕亍"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "兀賳丿賵乇丕"
+msgid "Show automatically selected packages"
+msgstr "兀馗賴乇 丕賱丨夭賲 丕賱賲禺鬲丕乇丞 兀賱賷丕賸"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "兀賮睾丕賳爻鬲丕賳"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flags reported by the kernel"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:RTL"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "丕丨匕賮 logical volumes 兀賵賱丕賸\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"丿毓賲 PCMCIA 睾賷乇 賲賵噩賵丿 亘毓丿 丕賱丌賳 賱廿氐丿丕乇 丕賱賳賵丕丞 2.2. 賮囟賱丕 丕爻鬲禺丿賲 丕賱廿氐丿丕乇 2.4"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "丨乇賰 毓噩賱丞 丕賱賮兀乇丞!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "賱鬲賳卮賷胤 丕賱賮兀乇丞,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "賲賳 賮囟賱賰 丕禺鬲亘乇 丕賱賮兀乇丞"
+msgid "Togo"
+msgstr "鬲賵噩賵"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "賱丕 賮兀乇丞"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "丨氐賱 卮卅 禺胤兀! - 賴賱 鬲賲 鬲孬亘賷鬲 mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "賱丕 卮卅"
+msgid "16 MB"
+msgstr "16 賲賷睾丕亘丕賷鬲"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 兀夭乇丕乇"
+msgid "Please try again"
+msgstr "乇噩丕亍 噩丕賵賱 賲乇丞 兀禺乇賶"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "夭乇賾賷賳"
+msgid "The model is correct"
+msgstr "丕賱胤乇丕夭 氐丨賷丨"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "夭乇 賵丕丨丿"
+msgid "FAT resizing failed: %s"
+msgstr "賮卮賱 鬲睾賷賷乇 丨噩賲 FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "丕禺鬲賷丕乇 賲賮乇丿 賱賱丨夭賲"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "賴匕丕 丕賱鬲賯爻賷賲 睾賷乇 賯丕亘賱 賱鬲睾賷賷乇 丕賱丨噩賲"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
+msgid "Location"
+msgstr "丕賱賲賰丕賳"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲賾丨丿丞 丕賱兀賲乇賷賰賷賾丞 (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "睾賵丕鬲賷賲丕賱丕"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "賴匕賴 丕賱賲丕賰賷賳丞"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "丨乇賮 爻賵丕賯丞 DOS: %s (賲噩乇丿 鬲禺賲賷賳)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "丕禺鬲乇 丕賱賲賱賮丕鬲 兀賵 丕賱兀丿賱丞 孬賲 丕賳賯乇 '兀囟賮'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "丕賱亘丨乇賷賳"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "SCSI 丕賴賲賱 賵丨丿丕鬲 丕賱"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "毓丕卅賱丞 丕賱賲毓丕賱丨 (賲孬賱丕: 6 賱賮卅丞 i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"賱兀賳賰 鬲賯賵賲 亘丕賱鬲孬亘賷鬲 毓亘乇 丕賱卮亘賰丞, 賮賯丿 鬲賲鬲 鬲賴賷卅丞 丕賱卮亘賰丞 賲爻亘賯丕賸.\n"
+"丕賳賯乇 賲賵丕賮賯 賱丨賮馗 丕賱鬲賴賷卅丞 丕賱禺丕氐丞 亘賰, 兀賵 丕賳賯乇 丕賱睾丕亍 賱廿毓丕丿丞 鬲賴賷卅丞 賵氐賱丕鬲 丕賱廿賳鬲乇賳鬲 "
+"賵 丕賱卮亘賰丞.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "serial"
+msgid "Keyboard layout: %s\n"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"賴賳丕 賷賲賰賳賰 兀賳 鬲禺鬲丕乇 丕匕丕 賰丕賳 賷噩亘 賱賱胤丕亘毓丕鬲 丕賱賲鬲氐賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 兀賳 鬲賰賵賳 賲鬲賵賮乇丞 "
+"賱賱賲丕賰賷賳丕鬲 丕賱兀禺乇賶 毓賱賶 丕賱卮亘賰丞."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid "Maltese (US)"
+msgstr "丕賱賲丕賱胤賷丞 (兀賲乇賷賰丕)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Generic"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"鬲丨賲賾賱 賵 鬲夭賷賱 鬲丨賲賷賱 賰賱 賳賯丕胤 鬲丨賲賷賱 兀賳馗賲丞 賲賱賮丕鬲 丕賱卮亘賰丞 (NFS)賵 SMB (賲丿賷乇\n"
+"丕賱卮亘賰丞 丕賱賲丨賱賷丞/Windows) 賵 NCP (NetWare)."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "亘胤丕賯丞 丕賱鬲賱賮丕夭"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "丕賱丕賳鬲賯丕賱 丕賱賶 丕賱賵囟毓 丕賱毓丕丿賷"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
+msgid "Size"
+msgstr "丨噩賲"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "睾賷睾丕亘丕賷鬲"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "丕賱賯賷丕爻賷"
+msgid "Greenland"
+msgstr "睾乇賷賳賱丕賳丿"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Toggle between flat and group sorted"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Collapse Tree"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Expand Tree"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "丕賱賲毓賱賵賲丕鬲"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "賴賱 賴匕丕 氐丨賷丨 ? "
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "禺胤兀 兀孬賳丕亍 丕賱賰鬲丕亘丞 丕賱賶 丕賱賲賱賮 %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "賲賱賮 賳爻禺 丕丨鬲賷丕胤賷 爻賷卅"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "賮卮賱鬲 丕賱廿爻鬲毓丕丿丞 賲賳 丕賱賲賱賮 %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "毓賱丕賲丞 丕賱卮乇賷胤 賱賷爻鬲 丕賱毓賱丕賲丞 丕賱氐丨賷丨丞. 毓賱丕賲丞 丕賱卮乇賷胤 賴賷 %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"鬲賵噩丿 賲爻丕丨丞 賮丕乇睾丞 賮賷 噩丿賵賱 丕賱鬲噩夭卅丕鬲 賱丿賷賰 賱賰賳賷 賱丕 兀爻鬲胤賷毓 丕爻鬲禺丿丕賲賴丕.\n"
-"丕賱丨賱 丕賱賵丨賷丿 賴賵 兀賳 鬲賳賯賱 丕賱鬲噩夭卅丕鬲 丕賱兀爻丕爻賷丞 賱鬲丨氐賱 毓賱賶 丕賱賲爻丕丨丞 亘賷賳 丕賱鬲噩夭卅丕鬲 "
-"丕賱賲賲鬲丿丞."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "丕賱鬲噩夭卅丕鬲 丕賱賲賲鬲丿丞 睾賷乇 賲丿毓賵賲丞 毓賱賶 賴匕賴 丕賱亘賷卅丞"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "賮卮賱 丕賱鬲丨賲賷賱: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "乇亘賲丕"
+"鬲賲 毓賲賱 賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賲爻亘賯丕賸.\n"
+"賵 賴賷 賲賲賰賾賳丞 丨丕賱賷丕賸.\n"
+"\n"
+"賲丕匕丕 鬲乇賷丿 兀賳 鬲賮毓賱責"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "馗乇賷賮"
+msgid "Delete All NBIs"
+msgstr "丕丨匕賮 賰賱 NBI"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "very nice"
-msgstr "馗乇賷賮 噩丿丕賸"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "賲賴賲"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"if set, send the mail report to this email address else send it to root."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "賷噩亘 兀賳 賷賰賵賳 賱丿賷賰"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "兀賷 丕毓丿丕丿 賱賭XFree 鬲乇賷丿責"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "丕賱鬲噩夭卅丕鬲 賱賷爻鬲 賰丕賮賷丞 賱賲爻鬲賵賶 RAID %d\n"
+msgid "More"
+msgstr "丕賱賲夭賷丿"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "賮卮賱 mkraid"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"亘賴匕丕 丕賱賲爻鬲賵賶 丕賱兀賲賳賷, 賷賰賵賳 丕爻鬲禺丿丕賲 賴匕丕 丕賱賳馗丕賲 賰禺丕丿賲 賷氐亘丨 賲賲賰賳丕賸.\n"
+"丕賱賲爻鬲賵賶 丕賱兀賲賳賷 毓丕賱賺 亘卮賰賱 賰丕賮賷 賱丕爻鬲禺丿丕賲 賴匕丕 丕賱賳馗丕賲 賰禺丕丿賲 賷爻鬲胤賷毓 賯亘賵賱\n"
+"丕鬲氐丕賱丕鬲 賲賳 毓賲賱丕亍 賰孬賷乇賷賳. 賲賱丨賵馗丞: 丕匕丕 賰丕賳鬲 賲丕賰賷賳鬲賰 賲噩乇丿 毓賲賷賱 毓賱賶 丕賱廿賳鬲乇賳鬲 "
+"賮丕賱兀噩丿乇 亘賰 丕禺鬲賷丕乇 賲爻鬲賵賶 兀賲賳賷 兀賯賱."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "賮卮賱 mkraid (乇亘賲丕 鬲賰賵賳 丨夭賲丞 raidtools 賲賮賯賵丿丞責)"
+msgid "Account Password"
+msgstr "賰賱賲丞 丕賱賲乇賵乇 賱賱丨爻丕亘"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "賱丕 賷賲賰賳 丕囟丕賮丞 鬲噩夭卅丞 丕賱賶 RAID _丕賱賲噩賴夭_ md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"賱賯丿 賯乇乇鬲 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓 毓賱賶 鬲噩夭卅丞.\n"
+"賴匕丕 賷毓賳賷 兀賳賴 賱丿賷賰 賲丨賲賾賱 廿賯賱丕毓 毓賱賶 丕賱賯乇氐 丕賱匕賷 鬲爻鬲禺丿賲賴 賱賱廿賯賱丕毓 (賲孬丕賱: System "
+"Commander).\n"
+"\n"
+"毓賱賶 兀賷 賯乇氐 鬲賯賵賲 亘丕賱廿賯賱丕毓責"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "鬲賵賯賮"
+msgid "Tajik keyboard"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱胤丕噩賷賰賷丞"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "丕亘丿兀"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"賷賲賰賳賰 賳賯賱 鬲賴賷卅丞 丕賱胤丕亘毓丞 丕賱鬲賷 鬲賲 毓賲賱賴丕 賱賱賭Spooler %s 丕賱賶 %s, 丕賱賭spooler "
+"丕賱丨丕賱賷. 賰賱 亘賷丕賳丕鬲 丕賱鬲賴賷卅丞 (丕爻賲 丕賱胤丕亘毓丞, 丕賱賵氐賮, 丕賱賲賰丕賳, 賳賵毓 丕賱賵氐賱丞, 賵 禺賷丕乇丕鬲 "
+"丕賱廿毓丿丕丿 丕賱廿賮鬲乇丕囟賷) 賷鬲賲 兀禺匕賴丕, 賱賰賳 賱賳 賷鬲賲 賳賯賱 丕賱賵馗丕卅賮.\n"
+"賱丕 賷賲賰賳 賳賯賱 賰賱 丕賱氐賮賵賮 賱賱兀爻亘丕亘 丕賱鬲丕賱賷丞:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "毓賳丿 丕賱廿賯賱丕毓"
+msgid "Font List"
+msgstr "賯丕卅賲丞 丕賱禺胤賵胤"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"毓賮賵丕賸, 賱丕 鬲賵噩丿 賲毓賱賵賲丕鬲\n"
-"丕囟丕賮賷丞 丨夭賱 賴匕賴 丕賱丨夭賲丞."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "丕賱禺丿賲丕鬲 賵 丕賱賲乇丕賯亘丕鬲"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "賲鬲賵賯賮丞"
+msgid "Select file"
+msgstr "丕禺鬲乇 賲賱賮"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "鬲毓賲賱"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "丕禺鬲乇 丕賱卮亘賰丞 兀賵 丕賱賲爻鬲囟賷賮 丕賱鬲賷 賷噩亘 兀賳 鬲賰賵賳 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賲鬲賵賮乇丞 賱賴:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "丕禺鬲乇 兀賷 禺丿賲丕鬲 鬲乇賷丿賴丕 兀賳 鬲亘丿兀 丌賱賷丕賸 毓賳丿 丕賱鬲孬亘賷鬲"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"賷賲賰賳賰 丕爻鬲禺丿丕賲 賴匕賴 丕賱兀賵丕賲乇 兀賷囟丕賸 賮賷 丨賯賱 \"兀賲乇 丕賱胤亘丕毓丞\" 賮賷 賲乇亘毓丕鬲 丨賵丕乇 丕賱胤亘丕毓丞 "
+"賮賷 丕賱毓丿賷丿 賲賳 丕賱鬲胤亘賷賯丕鬲, 賱賰賳 賱丕 鬲賯賲 賴賳丕 亘廿毓胤丕亍 丕爻賲 丕賱賲賱賮 賱兀賳 丕賱賲賱賮 丕賱賲胤賱賵亘 "
+"胤亘丕毓鬲賴 賷鬲賲 丕毓胤丕丐賴 賲賳 賯亘賱 丕賱鬲胤亘賷賯.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Database Server"
-msgstr "禺丕丿賲 賯賵丕毓丿 亘賷丕賳丕鬲"
+msgid "Japan"
+msgstr "丕賱賷丕亘丕賳"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "丕丿丕乇丞 毓賳 亘毓丿"
+msgid "Print option list"
+msgstr "賯丕卅賲丞 禺賷丕乇丕鬲 丕賱胤丕亘毓丞"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "File sharing"
-msgstr "賲卮丕乇賰丞 丕賱賲賱賮丕鬲"
+msgid "The change is done, but to be effective you must logout"
+msgstr "鬲賲 毓賲賱 丕賱鬲睾賷賷乇, 賵 賱賰賳 賱賷鬲賲 鬲賮毓賷賱賴 賷噩亘 毓賱賷賰 丕賱禺乇賵噩"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Internet"
-msgstr "丕賱廿賳鬲乇賳鬲"
+msgid "Search servers"
+msgstr "丕亘丨孬 賮賷 兀噩賴夭丞 丕賱禺丕丿賲"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "丕賱胤亘丕毓丞"
+msgid "NCP queue name missing!"
+msgstr "丕爻賲 氐賮 NCP 賲賮賯賵丿!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "鬲亘丿兀 禺丕丿賲 禺胤賵胤 X (賴匕丕 丕賱夭丕賲賷 賱賰賷 賷毓賲賱 XFree)"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr "鬲丨匕賷乇, 鬲賲 丕賷噩丕丿 丕鬲氐丕賱 廿賳鬲乇賳鬲 丌禺乇, 乇亘賲丕 賷賰賵賳 賷爻鬲禺丿賲 卮亘賰鬲賰"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "丨賲賾賱 賲卮睾賱丕鬲 兀噩賴夭丞 USB."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "丕賱賯乇氐 丕賱賲丿賲噩 丕賱賲爻賲賶 \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Syslog 賴賷 丕賱賵爻賷賱丞 丕賱鬲賷 鬲爻鬲禺丿賲賴丕 丕賱毓丿賷丿 賲賳 丕賱賲乇丕賯亘丕鬲 賱鬲爻噩賷賱 丕賱乇爻丕卅賱\n"
-"丕賱賶 賲賱賮丕鬲 爻噩賱丕鬲 毓丿賷丿丞. 丕賳賴丕 賮賰乇丞 噩賷丿丞 兀賳 鬲賯賵賲 丿丕卅賲丕賸 亘鬲卮睾賷賱 syslog."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "賷卮睾賱 賳馗丕賲 丕賱氐賵鬲 毓賱賶 噩賴丕夭賰"
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"亘乇賵鬲賵賰賵賱 rwho 賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 丕賱亘毓賷丿賷賳 亘丕賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘賰賱 丕賱賲爻鬲禺丿賲賷賳\n"
-"丕賱匕賷賳 爻噩賱賵丕 丕賱丿禺賵賱 丕賱賶 噩賴丕夭 賷卮睾賾賱 賲乇丕賯亘 rwho (賲賲丕孬賱 賱賭 finger)."
+"鬲毓匕乇 丕賱鬲兀賰丿 賲賳 氐丨丞 賳馗丕賲 丕賱賲賮丕鬲 %s. 賴賱 鬲乇賷丿 鬲氐丨賷丨 丕賱兀禺胤丕亍 (賰賳 丨匕乇丕賸, 賷賲賰賳 兀賳 "
+"鬲禺爻乇 亘賷丕賳丕鬲)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"亘乇賵鬲賵賰賵賱 rusers 賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 毓賱賶 丕賱卮亘賰丞 兀賳 賷鬲毓乇賮賵丕 毓賱賶 賲賳\n"
-"爻噩賱 丕賱丿禺賵賱 丕賱賶 丕賱兀噩賴夭丞 丕賱賲爻鬲噩賷亘丞 丕賱兀禺乇賶."
+msgid "Turn your computer into a reliable server"
+msgstr "丕噩毓賱 噩賴丕夭賰 禺丕丿賲丕賸 賷毓鬲賲丿 毓賱賷賴"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"亘乇賵鬲賵賰賵賱 rstat 賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 毓賱賶 丕賱卮亘賰丞 亘丕爻鬲乇噩丕毓\n"
-"丕丨氐丕卅賷丕鬲 丌丿丕亍 兀賷 噩賴丕夭 毓賱賶 賴匕賴 丕賱卮亘賰丞."
+msgid " (driver %s)"
+msgstr " (driver %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"賲乇丕賯亘 routed 賷爻賲丨 亘鬲丨丿賷孬 噩丿賵賱 賲賵噩賴 IP 丕賱丌賱賷 (IP router table) 毓賳 胤乇賷賯\n"
-"亘乇賵鬲賵賰賵賱 RIP. 亘賷賳賲丕 賷爻鬲禺丿賲 RIP 毓賱賶 丕賱卮亘賰丕鬲 丕賱氐睾賷乇丞, 鬲丨鬲丕噩 丕賱卮亘賰丕鬲 丕賱兀賰亘乇\n"
-"丕賱賶 亘乇賵鬲賵賰賵賱丕鬲 鬲賵噩賷賴 賲毓賯丿丞 兀賰孬乇."
+"賲賱賮(丕鬲) Loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"毓賷賳 丕賱兀噩賴夭丞 丕賱禺丕賲 丕賱賶 兀噩賴夭丞 賮賷 賵囟毓 丕賱賰賱賷卮賷賴 (賲孬賱 鬲噩夭卅丕鬲\n"
-"丕賱兀賯乇丕氐 丕賱氐賱亘丞), 賱賱丕爻鬲禺丕賲 賮賷 鬲胤亘賷賯丕鬲 賲孬賱 Oracle 兀賵 賲卮睾賱丕鬲 DVD"
+msgid "I don't know"
+msgstr "賱丕 兀毓乇賮 "
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", 賲爻鬲囟賷賮 TCP/IP \"%s\", 丕賱賲賳賮匕 \"%s\""
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Postfix 賴賵 毓賲賷賱 賱賳賯賱 丕賱亘乇賷丿, 兀賷 丕賱亘乇賳丕賲噩 丕賱匕賷 賷賳賯賱 丕賱亘乇賷丿 賲賳 噩賴丕夭 丕賱賶 丌禺乇."
+"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 賯乇氐 賱賱鬲孬亘賷鬲 丕賱丌賱賷. 賴匕賴 丕賱賲賷夭丞 禺胤乇丞 亘毓囟 丕賱卮卅 賵 賷噩亘 "
+"丕爻鬲禺丿丕賲賴丕 亘丨匕乇.\n"
+"\n"
+"亘賴匕賴 丕賱賲賷夭丞 賷賲賰賳賰 丕毓丕丿丞 毓賲賱 丕賱鬲孬亘賷鬲 丕賱匕賷 賯賲鬲 亘賴 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇, 賲毓 鬲賳亘賷賴賰 "
+"賱亘毓囟 丕賱禺胤賵丕鬲 丕賱鬲賷 賷噩亘 毓賱賷賰 賮賷賴丕 鬲睾賷賷乇 丕賱賯賷賲, 丨鬲賶 鬲鬲賲賰賳 賲賳 鬲睾賷賷乇賴丕.\n"
+"\n"
+"賱兀賯氐賶 丨丿 賲賳 丕賱兀賲丕賳, 爻鬲鬲賲 鬲噩夭卅丞 賵 鬲噩賴賷夭 丕賱兀賯乇丕氐 丕賱氐賱亘丞 亘卮賰賱 丌賱賷, 賲孬賱賲丕 丕禺鬲乇鬲 "
+"兀孬賳丕亍 丕賱鬲孬亘賷鬲 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇.\n"
+"\n"
+"賴賱 鬲乇賷丿 丕賱賲鬲丕亘毓丞責"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"賷賯賵賲 portmapper 亘廿丿丕乇丞 丕鬲氐丕賱丕鬲 RPC, 賵 丕賱鬲賷 鬲爻鬲禺丿賲 毓賳 胤乇賷賯\n"
-"亘乇賵鬲賵賰賵賱丕鬲 賲孬賱 NFS 賵 NIS. 禺丕丿賲 portmap 賲賳 丕賱賱丕夭賲 兀賳 賷毓賲賱 毓賱賶 丕賱兀噩賴夭丞\n"
-"丕賱鬲賷 鬲毓賲賱 賰禺丕丿賲丕鬲 鬲爻鬲禺丿賲 丕賱亘乇賵鬲賵賰賵賱丕鬲 丕賱鬲賷 鬲爻鬲賮賷丿 賲賳 丌賱賷丞 毓賲賱 RPC."
+"\n"
+"\n"
+"亘胤丕賯鬲賰 鬲爻鬲禺丿賲 丕賱賲卮睾賱 %s\"%s\" 丨丕賱賷丕賸 (丕賱賲卮睾賱 丕賱丨丕賱賷 賱亘胤丕賯鬲賰 賴賵 \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"丿毓賲 PCMCIA 賲賴賲 賱丿毓賲 兀卮賷丕亍 賲孬賱 亘胤丕賯丕鬲 丕賱廿賷孬乇賳鬲 賵\n"
-"丕賱賲賵丿賲丕鬲 毓賱賶 丕賱兀噩賴夭丞 丕賱丿賮鬲乇賷丞. 賱賳 賷鬲賲 亘丿亍 賴匕賴 丕賱禺丿賲丞 丕賱丕 毓賳丿 鬲賴賷卅鬲賴丕 賱匕丕 賮賱丕 "
-"賲爻賰賱丞 毓賳丿 鬲卮睾賷賱賴\n"
-"毓賱賶 丕賱兀噩賴夭丞 丕賱鬲賷 賱丕 鬲丨鬲丕噩賴."
+msgid "Post Uninstall"
+msgstr "賲丕 亘毓丿 丕夭丕賱丞 丕賱鬲孬亘賷鬲"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "丿毓賲 胤丕亘毓丕鬲 OKI 4w 賵 丕賱胤丕亘毓丕鬲 丕賱賲鬲賵丕賮賯丞."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"鬲賯賵賲 亘鬲卮睾賷賱 賲賮鬲丕丨 numlock 丌賱賷丕賸 賮賷 爻胤乇 丕賱兀賵丕賲乇\n"
-"賵 XFree 毓賳丿 丕賱廿賯賱丕毓."
+msgid "Cpuid level"
+msgstr "賲爻鬲賵賶 賴賵賷丞 丕賱賲毓丕賱噩"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS 亘乇賵鬲賵賰賵賱 卮丕卅毓 賱賲卮丕乇賰丞 丕賱賲賱賮丕鬲 毓賱賶 卮亘賰丕鬲\n"
-"TCP/IP. 賴匕賴 丕賱禺丿賲丞 鬲爻賲丨 賱賰 亘丕賱鬲丨賰賲 亘丕賱賲賱賮丕鬲 毓賳 胤乇賷賯 NFS."
+msgid "Mongolian (cyrillic)"
+msgstr "丕賱賲賳睾賵賱賷丞 (爻賷乇賷賱賷丞)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS 亘乇賵鬲賵賰賵賱 卮丕卅毓 賱賲卮丕乇賰丞 丕賱賲賱賮丕鬲 毓賱賶 卮亘賰丕鬲 TCP/IP.\n"
-"賴匕賴 丕賱禺丿賲丞 鬲賵賮乇 賵馗丕卅賮 NFS 賱賱兀噩賴夭丞 丕賱禺丕丿賲丞, 賵 丕賱鬲賷 賷鬲賲 鬲賴賷卅鬲賴丕 毓賳 胤乇賷賯\n"
-"賲賱賮 /etc/exports."
+msgid "Add a module"
+msgstr "丕囟丕賮丞 賵丨丿丞"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"鬲賳卮胤/鬲禺賲丿 賰賱 賵丕噩賴丕鬲 丕賱卮亘賰丞 丕賱賲賴賷卅丞 賰賷 鬲亘丿兀\n"
-"毓賳丿 亘丿亍 丕賱廿賯賱丕毓."
+msgid "Profile to delete:"
+msgstr "丕賱鬲卮賰賷賱 丕賱賲胤賱賵亘 丨匕賮賴:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"鬲丨賲賾賱 賵 鬲夭賷賱 鬲丨賲賷賱 賰賱 賳賯丕胤 鬲丨賲賷賱 兀賳馗賲丞 賲賱賮丕鬲 丕賱卮亘賰丞 (NFS)賵 SMB (賲丿賷乇\n"
-"丕賱卮亘賰丞 丕賱賲丨賱賷丞/Windows) 賵 NCP (NetWare)."
+msgid "Local measure"
+msgstr "丕噩乇丕亍 賲丨賱賷"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) 賴賵 禺丕丿賲 兀爻賲丕亍 賳胤丕賯 (DNS) 賵 丕賱匕賷 賷爻鬲禺丿賲 賱賲毓乇賮丞 兀爻賲丕亍 丕賱賲爻鬲囟賷賮丕鬲 "
-"兀賵 毓賳丕賵賷賳 IP."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, 賷爻鬲禺丿賲 賱毓賲賱 禺丕丿賲 毓丕賱賷 丕賱兀丿丕亍\n"
-"賵 賷毓鬲賲丿 毓賱賷賴."
+msgid "Account Login (user name)"
+msgstr "丕爻賲 丕賱賲丿禺賵賱 賱賱丨爻丕亘"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd 賴賵 賲乇丕賯亘 丕賱胤亘丕毓丞 丕賱匕賷 賷丨鬲丕噩賴 兀賲乇 lpr 賱賱毓賲賱 亘卮賱 氐丨賷丨. 兀爻丕爻丕賸\n"
-"賴賵 禺丕丿賲 賷賵氐賱 賵馗丕卅賮 丕賱胤亘丕毓丞 丕賱賶 丕賱胤丕亘毓丕鬲."
+msgid "Fdiv bug"
+msgstr "Fdiv bug"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Linuxconf 賷賯賵賲 賮賷 亘毓囟 丕賱兀丨賷丕賳 亘丕賱鬲乇鬲賷亘 賱毓賲賱 亘毓囟 丕賱兀毓賲丕賱\n"
-"毓賳丿 丕賱廿賯賱丕毓 賱賱賲丨丕賮馗丞 毓賱賶 丕毓丿丕丿丕鬲 丕賱賳馗丕賲."
+"兀丿丕丞 鬲賴賷卅丞 DrakFirewall\n"
+"\n"
+"鬲兀賰丿 賲賳 兀賳賰 賯賲鬲 亘鬲賴賷卅丞 丕鬲氐丕賱賰 亘丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 亘丕爻鬲禺丿丕賲\n"
+"drakconnect 賯亘賱 丕賱賲鬲丕亘毓丞."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "鬲丨賯賯 賵 鬲賴賷卅丞 丌賱賷丞 賱賱毓鬲丕丿 毓賳丿 丕賱廿賯賱丕毓."
+msgid "Benin"
+msgstr "亘賳賷賳"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"丕毓丕丿丞 鬲賵賱賷丿 丌賱賷丞 賱鬲乇賵賷爻丞 丕賱賳賵丕丞 賮賷 丿賱賷賱 /boot 賱賭\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Uruguay"
+msgstr "兀賵乇賵睾賵丕賷"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"賴匕賴 丕賱丨夭賲丞 鬲賯賵賲 亘鬲丨賲賷賱 禺乇賷胤丞 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱賲禺鬲丕乇丞 賰賲丕\n"
-"鬲賲 鬲毓賷賷賳賴丕 賮賷 /etc/sysconfig/keyboard. 賷賲賰賳 丕禺鬲賷丕乇 賱賵禺丞 丕賱賲賮丕鬲賷丨 亘丕爻鬲禺丿丕賲 "
-"兀丿丕丞 kbdconfig.\n"
-"賷噩亘 鬲乇賰賴丕 賲賲賰賾賳丞 賮賷 兀睾賱亘 丕賱兀噩賴夭丞."
+msgid "Path selection"
+msgstr "廿禺鬲賷丕乇 丕賱賲爻丕乇"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Name/IP address of host:"
+msgstr "毓賳賵丕賳 IP/丕爻賲 丕賱賲爻鬲囟賷賮:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "丕賱卮丕卮丞: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"賲乇丕賯亘 丕賱廿賳鬲乇賳鬲 丕賱兀爻丕爻賷 (賷爻賲賶 毓丕丿丞賸 亘賭 inetd) 賷亘丿兀\n"
-"賲噩賲賵毓丞 賲賳 禺丿賲丕鬲 丕賱廿賳鬲乇賳鬲 丕賱兀禺乇賶 毓賳丿 丕賱丨丕噩丞. 丕賳賴 賲爻丐賵賱 毓賳 亘丿亍\n"
-"丕賱毓丿賷丿 賲賳 丕賱禺丿賲丕鬲, 亘賲丕 賮賷賴丕 telnet, ftp, rsh, 賵 rlogin. 鬲毓胤賷賱 inetd 爻賷毓胤賱\n"
-"賰賱 丕賱禺丿賲丕鬲 丕賱賲匕賰賵乇丞."
+"賴賳丕賰 卮卅 爻賷卅 賷丨氐賱 賱賱賯乇氐. \n"
+"賱賯丿 賮卮賱 丕禺鬲亘丕乇 賱賱鬲兀賰丿 賲賳 氐丨丞 丕賱亘賷丕賳丕鬲. \n"
+"賴匕丕 賷毓賳賷 兀賳 賰鬲丕亘丞 兀賷 卮卅 毓賱賶 賴匕丕 丕賱賯乇氐 爻賷賳鬲賴賷 亘亘賷丕賳丕鬲 毓卮賵丕卅賷丞 賵 賮丕爻丿丞."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache 賴賵 禺丕丿賲 賵賷亘. 賵 賷購爻鬲禺丿賲 賱禺丿賲丞 賲賱賮丕鬲 HTML 賵 CGI."
+msgid "Printer host name or IP missing!"
+msgstr "丕爻賲 賲爻鬲囟賷賮 丕賱胤丕亘毓丞 兀賵 丕賱賭 IP 賲賮賯賵丿!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake 賷賯賵賲 亘丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿, 賵 賷賯賵賲 亘鬲賴賷卅丞 丕賱毓鬲丕丿\n"
-"丕賱噩丿賷丿/丕賱賲鬲睾賷乇 亘卮賰賱 丕禺鬲賷丕乇賷."
+msgid "Please check all users that you want to include in your backup."
+msgstr "乇噩丕亍 丕禺鬲乇 賰賱 丕賱賲爻鬲禺丿賲賷賳 丕賱匕賷賳 鬲乇賷丿 鬲囟賲賷賳賴賲 賮賷 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"賷賯賵賲 GPM 亘廿囟丕賮丞 丿毓賲 丕賱賮兀乇丞 賱鬲胤亘賷賯丕鬲 賱賷賳賰爻 賮賷 丕賱賵囟毓 丕賱賳氐賷 賲孬賱\n"
-"Midnight Commander. 丕囟丕賮丞 丕賱賶 匕賱賰 賮廿賳賴 賷爻賲丨 亘毓賲賱賷丕鬲 丕賱賯氐 賵 丕賱賱氐賯 賮賷 爻胤乇 "
-"丕賱兀賵丕賲乇,\n"
-"賰賲丕 賷鬲囟賲賳 丿毓賲 丕賱賯賵丕卅賲 丕賱賲禺鬲氐乇丞 賮賷 爻胤乇 丕賱兀賵丕賲乇."
+"丕賱賲丕爻丨 丕賱囟賵卅賷 %s 賷噩亘 丕毓丿丕丿賴 毓賳 胤乇賷賯 PrinterDrake.\n"
+"賷賲賰賳 鬲卮睾賷賱 PrinterDrake 賲賳 賲乇賰夭 鬲丨賰賲 Mandrake 賮賷 賯爻賲 丕賱毓鬲丕丿."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron 賴賵 亘乇賳丕賲噩 UNIX 丕賱賯賷丕爻賷 賱鬲卮睾賷賱 丕賱亘乇丕賲噩 丕賱賲丨丿丿丞 賲賳 賯亘賱 丕賱賲爻鬲禺丿賲\n"
-"毓賳丿 兀丿賵賯丕鬲 賲丨丿丿丞 丿賵乇賷丕賸. vixie cron 賷囟賷賮 毓丿丿丕賸 賲賳 丕賱賲夭丕賷丕 丕賱賶 UNIX\n"
-"cron 丕賱兀爻丕爻賷, 亘賲丕 賮賷賴丕 丨賲丕賷丞 兀賲賳賷丞 兀賮囟賱, 賵 禺賷丕乇丕鬲 鬲賴賷卅丞 兀賯賵賶."
+msgid "Bangladesh"
+msgstr "亘賳睾賱丕丿賷卮"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"鬲卮睾賱 丕賱兀賵丕賲乇 丕賱賲購噩丿賵賱丞 毓賳 胤乇賷賯 兀賲乇 at 毓賳丿 丕賱賵賯鬲 丕賱賲丨丿丿\n"
-"賱鬲卮睾賷賱 at, 賵 鬲賯賵賲 亘鬲卮睾賷賱 丕賱兀賵丕賲乇 丕賱丿賯毓賷丞 毓賳丿賲丕 賷賰賵賳 賲鬲賵爻胤 丕賱鬲丨賲賷賱 賯賱賷賱丕賻."
+msgid "Japan (cable)"
+msgstr "丕賱賷丕亘丕賳 (cable)"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"鬲購爻鬲禺丿賲 apmd 賱賲乇丕賯亘丞 丨丕賱丞 丕賱亘胤丕乇賷丞 賵 鬲爻噩賷賱賴丕 毓賳 胤乇賷賯 syslog.\n"
-"賷賲賰賳 賰匕賱賰 丕爻鬲禺丿丕賲賴丕 賱廿睾賱丕賯 丕賱噩賴丕夭 毓賳丿 囟毓賮 丕賱亘胤丕乇賷丞."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron 兀丿丕丞 賱鬲卮睾賷賱 丕賱兀賵丕賲乇 賮賷 兀賵賯丕鬲 賲丨丿丿丞."
+"\n"
+"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
+"賴匕丕 丕賱賲毓丕賱噩 爻賷爻丕毓丿賰 毓賱賶 鬲孬亘賷鬲 丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕丕 丕賱賰賲亘賷賵鬲乇 兀賵 "
+"丕賱賲賵氐賵賱丞 賲亘丕卮乇丞賸 亘丕賱卮亘賰丞 兀賵 亘賲丕賰賷賳丞 Windows 亘毓賷丿丞.\n"
+"\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 胤丕亘毓丞/胤丕亘毓丕鬲 賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞, 賮囟賱丕賸 賯賲 亘鬲賵氐賷賱賴丕 丕賱賶 賴匕丕 "
+"丕賱賰賲亘賷賵鬲乇 賵 賯賲 亘鬲卮睾賷賱賴丕 賰賷 賷鬲賲 丕賱鬲丨賯賯 賲賳賴丕/賲賳賴賲 丌賱賷丕賸. 兀賷囟丕賸 賷噩亘 兀賳 鬲賰賵賳 胤丕亘毓丞/"
+"胤丕亘毓丕鬲 丕賱卮亘賰丞 賵 兀噩賴夭丞 Windows 賲賵氐賵賱丞 賵 賲卮睾賾賱丞.\n"
+"\n"
+"賱丕丨馗 兀賳 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰丞 賯丿 賷爻鬲睾乇賯 賵賯鬲丕賸 兀胤賵賱 賲賳 丕賱鬲丨賯賯 "
+"丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 賮賯胤. 賱匕丕 賯賲 亘鬲毓胤賷賱 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 "
+"胤丕亘毓丕鬲 丕賱卮亘賰丞 賵/兀賵 丕賱胤丕亘毓丕鬲 丕賱賲爻鬲囟丕賮丞 賲賳 Windows 丕匕丕 賱賲 鬲賰賳 鬲丨鬲丕噩 丕賱賶 賴匕賴 "
+"丕賱賲賷夭丞.\n"
+"\n"
+" 丕賳賯乇 \"丕賱鬲丕賱賷\" 毓賳丿賲丕 鬲賰賵賳 賲爻鬲毓丿丕賸, 賵 毓賱賶 \"丕賱睾丕亍\" 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丿丕丿 "
+"丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱丌賳."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "鬲卮睾賾賱 賳馗丕賲 丕賱氐賵鬲 ALSA (Advanced Linux Sound Arachitecture)"
+msgid "Initial tests"
+msgstr "丕賱廿禺鬲亘丕乇丕鬲 丕賱兀賵賱賷丞"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "噩丕乇賷 鬲乇賰賷亘 丕賱噩夭賲..."
+msgid "Continue"
+msgstr "鬲丕亘毓"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Custom Restore"
+msgstr "丕爻鬲毓丕丿丞 賲禺氐氐丞"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": 丕匕丕 鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞 氐賵鬲 毓賱賶 賳馗丕賲賰, 爻賷鬲賲 毓乇囟賴丕\n"
+"賴賳丕. 丕匕丕 賱丕丨馗鬲 兀賳 亘胤丕賯丞 丕賱氐賵鬲 丕賱賲毓乇賵囟丞 賴賳丕 賱賷爻鬲 鬲賱賰 丕賱賲賵噩賵丿丞\n"
+"賮毓賱丕賸 毓賱賶 賳馗丕賲賰, 賷賲賰賳賰 丕賱賳賯乇 毓賱賶 丕賱夭乇 賵 丕禺鬲賷丕乇 賲卮睾賱\n"
+"丌禺乇."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Script-based"
+msgstr "Script-based"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgid "Error reading file %s"
+msgstr "禺胤兀 賮賷 賯乇丕亍丞 丕賱賲賱賮 %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "丕毓丿丕丿 PLL:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "賱丿賷賰 鬲噩夭卅丞 FAT 鬲賲 鬲丨賲賷賱賴丕 毓賱賶 /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid " on "
+msgstr " 毓賱賶 "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[keyboard]"
+msgid "The URL must begin with http:// or https://"
+msgstr "丕賱毓賳賵丕賳 賷噩亘 兀賳 賷亘丿兀 亘賭 http:// 兀賵 https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"賷賲賰賳賰 鬲丨丿賷丿 丕賱賭URI 賲亘丕卮乇丞 賱賱賵氐賵賱 丕賱賶 丕賱胤丕亘毓丞. 丕賱賭URI 賷噩亘 兀賳 賷鬲賵丕賮賯 賲毓 "
+"賲鬲胤賱亘丕鬲 CUPS 兀賵 Foomatic. 賱丕丨胤 兀賳賴 賱賷爻鬲 賰賱 兀賳賵丕毓 丕賱賭URI 賲丿毓賵賲丞 賲賳 "
+"丕賱賭spoolers."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "Other OS (SunOS...)"
+msgstr "賳馗丕賲 丌禺乇 (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+msgid "Install/Upgrade"
+msgstr "鬲孬亘賷鬲/鬲乇賯賷丞"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d 丨夭賲"
#: ../../standalone.pm:1
#, c-format
@@ -6709,4807 +6515,5162 @@ msgstr ""
"--help : show this message.\n"
"--version : show version number.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Domain Authentication Required"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-" 賴匕丕 丕賱亘乇賳丕賲噩 賴賵 亘乇賳丕賲噩 丨乇; 賷賲賰賳賰 丕毓丕丿丞 鬲賵夭賷毓丞 賵/兀賵 鬲毓丿賷賱賴\n"
-" 鬲丨鬲 亘賳賵丿 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 (GPL) 賰賲丕 賳購卮賽乇鬲 毓賳 胤乇賷賯\n"
-" 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞; 廿賲丕 丕廿氐丿丕乇 丕賱孬丕賳賷 賲賳 丕賱鬲乇禺賷氐 兀賵\n"
-" 兀賷 賳爻禺丞 鬲丕賱賷丞 (丨爻亘 丕禺鬲賷丕乇賰).\n"
"\n"
-" 賴匕丕 丕賱亘乇賳丕賲噩 賷購賵夭賾賻毓 毓賱賶 兀賲賱 兀賳 賷賰賵賳 賲賮賷丿丕,\n"
-" 賱賰賳 丿賵賳 兀賷 囟賲丕賳鈥; 丨鬲賶 亘丿賵賳 丕賱囟賲丕賳丞 丕賱賲賮賴賵賲丞\n"
-" 賱賱廿鬲噩丕乇 兀賵 丕賱賲賳丕爻亘丞 賱睾乇囟 賲毓賷賳. 丕賳馗乇\n"
-" 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 賱賱鬲賮丕氐賷賱.\n"
"\n"
-" 賷噩亘 兀賳 鬲賰賵賳 賯丿 鬲爻賱賲鬲 賳爻禺丞 賲賳 鬲乇禺賷氐 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞\n"
-" 賲毓 丕賱亘乇賳丕賲噩; 賮賷 丨丕賱丞 毓丿賲 鬲爻賱賲 丕賱乇禺氐丞 乇丕爻賱 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞 毓賱賶 丕賱毓賳賵丕賳 "
-"丕賱鬲丕賱賷\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307,\n"
-" USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "丕賱禺乇賵噩 賲賳 丕賱鬲孬亘賷鬲"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "鬲孬亘賷鬲 鬲丨丿賷孬丕鬲 丕賱賳馗丕賲"
+" 卮賰乇 禺丕氐:\n"
+"\t- 賲卮乇賵毓 LTSP http://www.ltsp.org\n"
+"\t- 賲丕賷賰賱 亘乇丕賵賳 <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "鬲賴賷卅丞 丕賱禺丿賲丕鬲"
+msgid "Costa Rica"
+msgstr "賰賵爻鬲丕乇賷賰丕"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "鬲賴賷卅丞 X"
+msgid "Use libsafe for servers"
+msgstr "廿爻鬲禺丿賲 libsafe 賱賱賲賱賯賲丕鬲"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "鬲孬亘賷鬲 賲丨賲賾賽賱 丕賱廿賯賱丕毓"
+msgid "Icelandic"
+msgstr "丕賱丌賷爻賱丕賳丿賷丞"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "鬲賴賷卅丞 丕賱卮亘賰丞"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "兀囟賮 賲爻鬲禺丿賲"
+msgid "Please relog into %s to activate the changes"
+msgstr "賷乇噩賶 丕毓丕丿丞 鬲爻噩賷賱 丕賱丿禺賵賱 丕賱賶 %s 賱鬲賳卮賷胤 丕賱鬲睾賷賷乇丕鬲"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "賰賱賲丞 賲乇賵乇 丕賱賲爻鬲禺丿賲 丕賱噩匕乇"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "鬲孬亘賷鬲 丕賱賳馗丕賲"
+msgid "Lilo/grub mode"
+msgstr "賵囟毓 Lilo/grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "丕禺鬲乇 丕賱丨夭賲 丕賱鬲賷 爻鬲購孬亘賾賻鬲"
+msgid "Output"
+msgstr "丕賱賳丕鬲噩"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "鬲噩賴賷夭 丕賱鬲噩夭卅丕鬲"
+msgid "Circular mounts %s\n"
+msgstr "Circular mounts %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "鬲噩夭卅丞 丕賱兀賯乇丕氐"
+msgid "Martinique"
+msgstr "賲丕乇鬲賷賳賷賰"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "丕禺鬲乇 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱禺丕氐丞 亘賰"
+msgid "HardDrive / NFS"
+msgstr "HardDrive / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "丕禺鬲乇 賳賵毓 丕賱鬲孬亘賷鬲"
+msgid "a number"
+msgstr "乇賯賲"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "丕賱鬲丨賯賯 賲賳 丕賱兀賯乇丕氐 丕賱氐賱亘丞"
+msgid "Swedish"
+msgstr "丕賱爻賵賷丿賷丞"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "廿毓丿丕丿 丕賱賮兀乇丞"
+msgid "Which %s driver should I try?"
+msgstr "兀賷 賲卮睾賱 %s 賷噩亘 兀賳 丕爻鬲禺丿賲賴責"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "丕賱鬲乇禺賷氐"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "爻賵賮 鬲爻鬲賱賲 鬲賳亘賷賴丕賸 廿匕丕 賰丕賳鬲 兀丨丿 丕賱禺丿賲丕鬲 丕賱賲禺鬲丕乇丞 睾賷乇 毓丕賲賱丞."
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "丕禺鬲乇 賱睾鬲賰"
+msgid "Filesystem types:"
+msgstr "兀賳賵丕毓 兀賳馗賲丞 丕賱賲賱賮丕鬲:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮 毓賱賶 HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "賲賵丕賮賯"
+msgid "Northern Mariana Islands"
+msgstr "噩夭乇 賲丕乇賷丕賳丕 丕賱卮賲丕賱賷丞"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "賱丕 卮卅"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "丕賱賲爻鬲禺丿賲 :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (賲卮睾賱 毓乇囟 丕賱鬲孬亘賷鬲)"
+msgid "Please enter your password"
+msgstr "乇噩丕亍 賰賱賲丞 丕賱賲乇賵乇"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"賷賲賰賳 賱亘胤丕賯鬲賰 丕賱鬲賲鬲毓 亘丿毓賲 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿 賲毓 XFree %s, \n"
-"賱丕丨馗 兀賳 賴匕丕 丕賱丿毓賲 鬲噩乇賷亘賷 賵 賯丿 賷鬲爻亘亘 賮賷 丕賷賯丕賮 噩賴丕夭賰."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 賲毓 丿毓賲 鬲噩乇賷亘賷 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "賷賲賰賳 賱亘胤丕賯鬲賰 丕賱丨氐賵賱 毓賱賶 丿毓賲 賱賱鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿 賲毓 XFree %s"
+"賱廿爻賲 丕賱鬲卮賰賷賱 丕賱匕賷 爻鬲毓賲賱賴 (丕賱鬲卮賰賷賱 丕賱噩丿賷丿 賷鬲賲 毓賲賱賴 賰賳爻禺丞 賲賳 丕賱鬲卮賰賷賱 丕賱丨丕賱賷) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 賲毓 鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿"
+msgid "Floppy"
+msgstr "丕賱賯乇氐 丕賱賲乇賳"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
msgstr ""
-"賷賲賰賳 賱亘胤丕賯鬲賰 丕賱鬲賲鬲毓 亘丿毓賲 賱賱鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿 賱賰賳 賮賯胤 賲毓 XFree %s, \n"
-"賱丕丨馗 兀賳 賴匕丕 丕賱丿毓賲 鬲噩乇賷亘賷 賵 賯丿 賷鬲爻亘亘 賮賷 丕賷賯丕賮 噩賴丕夭賰.\n"
-"亘胤丕賯鬲賰 賲丿毓賵賲丞 毓賳 胤乇賷賯 XFree %s 丕賱鬲賷 賷賲賰賳 兀賳 鬲賰賵賳 賲丿毓賵賲丞 亘卮賰賱 兀賮囟賱 賮賷 賵囟毓賷丞 "
-"丕賱乇爻賵賲 孬賳丕卅賷丞 丕賱兀亘毓丕丿."
+"賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 賲爻丨 丕賱賵爻賷胤 丕賱賯丕亘賱 賱廿毓丕丿丞 丕賱賰鬲丕亘丞 (丕賱噩賱爻丞 "
+"丕賱兀賵賱賶)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"賷賲賰賳 賱亘胤丕賯鬲賰 丕賱丨氐賵賱 毓賱賶 丿毓賲 賱賱鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿 賱賰賳 賮賯胤 賲毓 XFree %s.\n"
-"亘胤丕賯鬲賰 賲丿毓賵賲丞 毓賳 胤乇賷賯 XFree %s 丕賱鬲賷 賷賲賰賳 兀賳 鬲賰賵賳 賲丿毓賵賲丞 亘卮賱 兀賮囟賱 賮賷 丕賱賵囟毓 "
-"孬賳丕卅賷 丕賱兀亘毓丕丿."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referencing"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "賲丨賲賾賱 丕賱廿賯賱丕毓"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "賯賲 亘廿毓丿丕丿 丕賱亘胤丕賯丞 \"%s\"%s 賮賯胤"
+msgid "Move"
+msgstr "賳賯賱"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "丕爻鬲禺丿丕賲 丕賲鬲丿丕丿 Xinerama"
+msgid "Bootloader to use"
+msgstr "賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱賲購爻鬲禺丿賲"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "丕毓丿丕丿 賰賱 丕賱乇丐賵爻 亘卮賰賱 賲爻鬲賯賱"
+msgid "SMB server host"
+msgstr "賲爻鬲囟賷賮 禺丕丿賲 SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "兀賷 丕毓丿丕丿 賱賭XFree 鬲乇賷丿責"
+msgid "Name Servers:"
+msgstr "禺丕丿賲丕鬲 丕賱廿爻賲:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "廿毓丿丕丿 XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "廿禺鬲乇 丨噩賲 匕丕賰乇丞 亘胤丕賯丞 丕賱卮丕卮丞"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "丕丨匕賮 賴匕賴 丕賱胤丕亘毓丞 賲賳 Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"賳馗丕賲賰 賷丿毓賲 丕賱廿毓丿丕丿 賲鬲毓丿丿 丕賱乇丐賵爻.\n"
-"賲丕匕丕 鬲乇賷丿 兀賳 鬲賮毓賱責"
+"Linux Virtual Server, 賷爻鬲禺丿賲 賱毓賲賱 禺丕丿賲 毓丕賱賷 丕賱兀丿丕亍\n"
+"賵 賷毓鬲賲丿 毓賱賷賴."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "廿毓丿丕丿 賲鬲毓丿丿 丕賱乇丐賵爻"
+msgid "4 billion colors (32 bits)"
+msgstr "4 亘賱賷賵賳 賱賵賳 (32 亘鬲)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "廿禺鬲乇 禺丕丿賲 X"
+msgid "Micronesia"
+msgstr "賲賷賰乇賵賳賷夭賷丕"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "禺丕丿賲 X"
+msgid "License"
+msgstr "丕賱鬲乇禺賷氐"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 賲賷睾丕亘丕賷鬲 兀賵 兀賰孬乇"
+msgid "This may take a moment to generate the keys."
+msgstr "賯丿 賷爻鬲睾乇賯 賴匕丕 亘毓囟 丕賱賵賯鬲 賱鬲賵賱賷丿 丕賱賲賮丕鬲賷丨."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 賲賷睾丕亘丕賷鬲"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 (賲丨賱賷丞, TCP/Socket, 賵 SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 賲賷睾丕亘丕賷鬲"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (using pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 賲賷睾丕亘丕賷鬲"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"賱賯丿 馗賴乇 禺胤兀 - 賱賲 賷鬲賲 丕賷噩丕丿 兀噩賴夭丞 氐丕賱丨丞 賷賲賰賳 丕賳卮丕亍 兀賳馗賲丞 賲賱賮丕鬲 噩丿賷丿丞. 鬲兀賰丿 賲賳 "
+"丕賱毓鬲丕丿 丕賱禺丕氐 亘賰 賱賲毓乇賮丞 卮亘亘 賴匕賴 丕賱賲卮賰賱丞"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 賲賷睾丕亘丕賷鬲"
+msgid "Starting the printing system at boot time"
+msgstr "亘丿亍 賳馗丕賲 丕賱胤亘丕毓丞 毓賳丿 丕賱廿賯賱丕毓"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 賲賷睾丕亘丕賷鬲"
+msgid "Do you want to start the connection at boot?"
+msgstr "賴賱 鬲乇賷丿 亘丿亍 丕賱賵氐賱丞 毓賳丿 丕賱廿賯賱丕毓責"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 賲賷睾丕亘丕賷鬲"
+msgid "Processor ID"
+msgstr "賴賵賷丞 丕賱賲毓丕賱噩"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 賰賷賱賵亘丕賷鬲"
+msgid "Sound trouble shooting"
+msgstr "丨賱 賲卮丕賰賱 丕賱氐賵鬲"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 賰賷賱賵亘丕賷鬲"
+msgid "Polish (qwerty layout)"
+msgstr "丕賱亘賵賱賳丿賷丞 (qwerty layout)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "賯賲 亘丕賱鬲賳卮賷胤 丕賱丌賳"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"賴賱 鬲乇賷丿 丨賮馗 丕賱鬲睾賷賷乇丕鬲責\n"
-"丕賱廿毓丿丕丿 丕賱丨丕賱賷 賴賵:\n"
"\n"
-"%s"
+"賳卮丕胤丕鬲 Drakbackup 毓賳 胤乇賷賯 丕賱賯乇氐 丕賱賲丿賲噩:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "禺賷丕乇丕鬲"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"兀賳鬲 毓賱賶 賵卮賰 鬲孬亘賷鬲 賳馗丕賲 丕賱胤亘丕毓丞 %s 毓賱賶 賳馗丕賲 賷毓賲賱 毓賱賶 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 %s.\n"
+"賳馗丕賲 丕賱胤亘丕毓丞 賷卮睾賾賱 賲乇丕賯亘 (毓賲賱賷丞 禺賱賮賷丞) 賷賯賵賲 亘丕賳鬲馗丕乇 賵馗丕卅賮 丕賱胤亘丕毓丞 賵 賷鬲毓丕賲賱 "
+"賲毓賴丕. 賴匕丕 丕賱賲乇丕賯亘 賷賲賰賳 丕賱賵氐賵賱 丕賱賷賴 毓賳 賲賳 賯賽亘賱 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 毓賱賶 丕賱卮亘賰丞 賵 "
+"賱匕丕 賮賯丿 賷賲賰賳 兀賳 賷賰賵賳 賳賯胤丞 賲亘丿卅賷丞 賱賴噩賲丕鬲 丕賱賲禺鬲乇賯賷賳. 賱賴匕丕 賷鬲賲 丕禺鬲賷丕乇 丕賱賯賱賷賱 賲賳 "
+"丕賱賲乇丕賯亘丕鬲 賱鬲卮睾賷賱賴丕 丕賮鬲乇丕囟賷丕賸 毓賱賶 賴匕丕 丕賱賲爻鬲賵賶 丕賱兀賲賳賷.\n"
+"\n"
+"賴賱 鬲乇賷丿 賮毓賱丕賸 鬲賴賷卅丞 丕賱胤亘丕毓丞 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞責"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "丕禺鬲亘丕乇"
+msgid "Host \"%s\", port %s"
+msgstr "丕賱賲爻鬲囟賷賮 \"%s\", 丕賱賲賳賮匕 %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "丿賯丞 丕賱毓乇囟"
+msgid "This partition can't be used for loopback"
+msgstr "賴匕賴 丕賱鬲噩夭卅丞 賱丕 賷賲賰賳 丕爻鬲禺丿丕賲賴丕 賱賭loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "丕賱卮丕卮丞"
+msgid "File already exists. Use it?"
+msgstr "丕賱賲賱賮 賲賵噩賵丿 賲爻亘賯丕, 賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲賴責"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "亘胤丕賯丞 丕賱卮丕卮丞"
+msgid "received: "
+msgstr "賲購爻鬲賯亘賱: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "賳爻亘丞 丕賱廿賳毓丕卮 丕賱乇兀爻賷"
+msgid "Right Alt key"
+msgstr "賲賮鬲丕丨 Alt 丕賱兀賷賲賳"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "賳爻亘丞 丕賱廿賳毓丕卮 丕賱兀賮賯賷"
+msgid "the list of alternative drivers for this sound card"
+msgstr "賯丕卅賲丞 丕賱賲卮睾賱丕鬲 丕賱亘丿賷賱丞 賱亘胤丕賯丞 丕賱氐賵鬲"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"丕賱賲毓丕賲賱丕賳 丕賱賲賴賲丕賳 噩丿丕 賴賲丕 賳爻亘丞 丕賱廿賳毓丕卮 丕賱兀賮賯賷, 賵 賴賷 丕賱賳爻亘丞 丕賱鬲賷\n"
-"賷鬲賲 賮賷賴丕 丕賳毓丕卮 丕賱卮丕卮丞 賰丕賲賱丞, 賵 丕賱兀賴賲 賴賵 賳爻亘丞 丕賱鬲夭丕賲賳 丕賱兀賮賯賷\n"
-"賵 丕賱鬲賷 賮賷 禺賱丕賱賴丕 賷鬲賲 毓乇囟 禺胤賵胤 丕賱賲爻丨.\n"
-"\n"
-"賲賳 *丕賱賲賴賲 噩丿丕* 兀賳 賱丕 鬲丨丿丿 賳賵毓 卮丕卮丞 賲毓 賲鬲賵爻胤 鬲夭丕賲賳\n"
-"兀賰亘乇 賲賳 賲賯丿乇丞 卮丕卮鬲賰 賱兀賳賰 亘賴匕丕 賯丿 鬲丿賲乇 卮丕卮鬲賰.\n"
-" 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕 賷賲賰賳賰 丕禺鬲賷丕乇 丕毓丿丕丿丕鬲 毓丕丿賷丞."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "鬲毓匕乇 丕賱鬲兀賰丿 賲賳 賵噩賵丿 Plug 'n Play. 賮囟賱丕賸 丕禺鬲乇 丕賱卮丕卮丞 丕賱氐丨賷丨丞"
+msgid "Scanner sharing"
+msgstr "賲卮丕乇賰丞 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "丕賱賲氐賳毓"
+msgid "Tonga"
+msgstr "鬲賵賳噩賵"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "鬲賵賳爻"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "廿禺鬲乇 卮丕卮丞"
+msgid "Profile: "
+msgstr "丕賱鬲卮賰賷賱:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "亘胤丕賯丞 丕賱卮丕卮丞: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "丕賳賯乇 毓賱賶 噩賴丕夭 賮賷 丕賱爻賱爻賱丞 丕賱賷爻乇賶 賱毓乇囟 賲毓賱賵賲丕鬲賴 賴賳丕."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "丕禺鬲乇 丿賯丞 丕賱毓乇囟 賵 毓賲賯 丕賱兀賱賵丕賲"
+msgid "XawTV isn't installed!"
+msgstr "XawTV 睾賷乇 賲孬亘鬲!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "丿賯丞 丕賱毓乇囟"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"丕賳卮卅/賱賳賯賱\n"
+"賲賮丕鬲賷丨 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賱賭SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 亘賱賷賵賳 賱賵賳 (32 亘鬲)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "賱丕 鬲購囟賲賾賳 丕賱賲賱賮丕鬲 丕賱賲賴賲丞 (passws, group,fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 賲賱賷賵賳 賱賵賳 (24 亘鬲)"
+msgid "old static device name used in dev package"
+msgstr "丕爻賲 丕賱噩賴丕夭 丕賱賯丿賷賲 丕賱爻丕賰賳 丕賱賲爻鬲禺丿賲 賮賷 丨夭賲丞 dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 兀賱賮 賱賵賳 (16 亘鬲)"
+msgid "This label is already used"
+msgstr "賴匕賴 丕賱毓賱丕賲丞 賲爻鬲禺丿賲丞 賲爻亘賯丕"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 兀賱賮 賱賵賳 (15 亘鬲)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
+"賴匕丕 丕賱賲毓丕賱噩 爻賷爻丕毓丿賰 毓賱賶 鬲孬亘賷鬲 丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕丕 丕賱賰賲亘賷賵鬲乇 兀賵 "
+"丕賱賲賵氐賵賱丞 賲亘丕卮乇丞賸 亘丕賱卮亘賰丞.\n"
+"\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 胤丕亘毓丞/胤丕亘毓丕鬲 賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞, 賮囟賱丕賸 賯賲 亘鬲賵氐賷賱賴丕 丕賱賶 賴匕丕 "
+"丕賱賰賲亘賷賵鬲乇 賵 賯賲 亘鬲卮睾賷賱賴丕 賰賷 賷鬲賲 丕賱鬲丨賯賯 賲賳賴丕/賲賳賴賲 丌賱賷丕賸. 兀賷囟丕賸 賷噩亘 兀賳 鬲賰賵賳 胤丕亘毓丞/"
+"胤丕亘毓丕鬲 丕賱卮亘賰丞 賲賵氐賵賱丞 賵 賲卮睾賾賱丞.\n"
+"\n"
+"賱丕丨馗 兀賳 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰丞 賯丿 賷爻鬲睾乇賯 賵賯鬲丕賸 兀胤賵賱 賲賳 丕賱鬲丨賯賯 "
+"丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 賮賯胤. 賱匕丕 賯賲 亘鬲毓胤賷賱 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 "
+"胤丕亘毓丕鬲 丕賱卮亘賰丞 丕匕丕 賱賲 鬲賰賳 鬲丨鬲丕噩 丕賱賶 賴匕賴 丕賱賲賷夭丞.\n"
+"\n"
+" 丕賳賯乇 \"丕賱鬲丕賱賷\" 毓賳丿賲丕 鬲賰賵賳 賲爻鬲毓丿丕賸, 賵 毓賱賶 \"丕賱睾丕亍\" 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丿丕丿 "
+"丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱丌賳."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 賱賵賳 (8 亘鬲)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "亘毓丿 鬲賴賷卅丞 丕賱鬲賯爻賷賲 %s, 賮廿賳 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱鬲噩夭卅丞 爻鬲賮賯丿"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "賴賱 賴匕丕 賴賵 丕賱廿毓丿丕丿 丕賱氐丨賷丨責"
+msgid "Connection Time: "
+msgstr "賵賯鬲 丕賱廿鬲氐丕賱:"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "爻鬲鬲賲 丕賱賲睾丕丿乇丞 賮賷 %d 孬賵丕賳"
+msgid "select perm file to see/edit"
+msgstr "丕禺鬲乇 賲賱賮 鬲氐丕乇賷丨 賱乇丐賷鬲賴/鬲丨乇賷乇賴"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"馗賴乇 禺胤兀:\n"
-"%s\n"
-"丨丕賵賱 鬲睾賷賷乇 亘毓囟 丕賱賲毓丕賲賱丕鬲"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "鬲丨匕賷乇: 丕禺鬲亘丕乇 亘胤丕賯丞 丕賱毓乇囟 賴匕賴 賯丿 賷鬲爻亘 賮賷 丕賷賯丕賮 噩賴丕夭賰"
+"賮囟賱丕 兀丿禺賱 賯乇氐 丕賱鬲孬亘賷鬲 賮賷 爻賵丕賯鬲賰 賵 丕囟睾胤 賲賵丕賮賯 毓賳丿賲丕 鬲賳鬲賴賷.\n"
+"廿匕丕 賱賲 賷賰賳 賯乇氐 丕賱鬲孬亘賷鬲 賱丿賷賰 丕囟睾胤 丕賱睾丕亍 賱賱廿賲鬲賳丕毓 毓賳 丕賱鬲丨丿賷孬 丕賱丨賷."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "賴賱 鬲乇賷丿 鬲噩乇亘丞 丕賱廿毓丿丕丿責"
+msgid "Use group id for execution"
+msgstr "丕爻鬲禺丿賲 group id 賱賱鬲賳賮賷匕"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "丕禺鬲亘丕乇 丕賱廿毓丿丕丿"
+msgid "Choose the default user:"
+msgstr "丕禺鬲乇 丕賱賲爻鬲禺丿賲 丕賱丕賮鬲乇丕囟賷:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "兀賷 賳馗丕賲 賷爻鬲禺丿賲賴 噩賴丕夭 丕賱鬲賱賮丕夭 賱丿賷賰責"
+msgid "Gabon"
+msgstr "丕賱睾丕亘賵賳"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"亘胤丕賯丞 丕賱乇爻賵賲 丕賱禺丕氐丞 亘賰 賷亘丿賵 兀賳賴丕 鬲丨鬲賵賷 毓賱賶 賲賵氐賱 賱賱鬲賱賮丕夭.\n"
-"賷賲賰賳 鬲賴賷卅丞 丕賱亘胤丕賯丞 賱賱毓賲賱 亘丕爻鬲禺丿丕賲 丕賱賭 frame-buffer.\n"
-"\n"
-"賱賴匕丕 丕賱睾乇囟 賷噩亘 毓賱賷賰 鬲賵氐賷賱 亘胤丕賯丞 丕賱乇爻賵賲 亘丕賱鬲賱賮丕夭 賯亘賱 亘丿亍 鬲卮睾賷賱 丕賱賰賲亘賷賵鬲乇.\n"
-"孬賲 丕禺鬲乇 \"TVout\" 賲賳 賲丨賲賾賱 丕賱廿賯賱丕毓\n"
"\n"
-"賴賱 賱丿賷賰 賴匕賴 丕賱賲賷夭丞責"
+"賱丕 鬲丨鬲丕噩 丕賱賶 鬲賴賷卅丞 丕賱胤丕亘毓丕鬲 毓賱賶 禺丕丿賲丕鬲 CUPS 丕賱亘毓賷丿丞; 賴匕賴 丕賱賰丕亘毓丕鬲 賷賲賰賳 "
+"丕賰鬲卮賱賮賴丕 丌賱賷丕賸."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"賷賲賰賳賳賷 噩毓賱 噩賴丕夭賰 賷亘丿兀 X 亘卮賰賱 丌賱賷 亘毓丿 丕賱廿賯賱丕毓.\n"
-"賴賱 鬲乇賷丿 X 兀賳 亘賷丿兀 亘毓丿 廿毓丕丿丞 鬲卮睾賷賱 噩賴丕夭賰責"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "賵丕噩賴丞 乇爻賵賲賷丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱"
+"賷丿毓賲 Mandrake Linux 丕賱毓丿賷丿 賲賳 丕賱賱睾丕鬲. 丕禺鬲乇\n"
+"丕賱賱睾丕鬲 丕賱鬲賷 鬲乇賷丿 鬲孬亘賷鬲賴丕. 爻鬲賰賵賳 賴匕賴 賲鬲賵賮乇丞賸 毓賳丿\n"
+"丕賰鬲賲丕賱 丕賱鬲孬亘賷鬲 賵 丕毓丿丕丞 鬲卮睾賷賱 丕賱賳馗丕賲."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "賲卮睾賱 XFree86: %s\n"
+msgid "Domain"
+msgstr "丕賱賳胤丕賯"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "禺丕丿賲 XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "丨噩賲 丕賱匕丕賰乇丞 丕賱丿賯賷賯 毓賳丿 丕賱丨丕噩丞 )鬲賲 丕賷噩丕丿 %d 賲賷睾丕亘丕賷鬲("
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "丿賯丞 丕賱毓乇囟: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "毓賲賯 丕賱兀賱賵丕賳: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 丕賱孬丕賳賷 賱賱賲賵賮乇 (丕禺鬲賷丕乇賷)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "匕丕賰乇丞 亘胤丕賯丞 丕賱卮丕卮丞: %s 賰賷賱賵亘丕賷鬲\n"
+msgid "Boot device"
+msgstr "噩賴丕夭 丕賱廿賯賱丕毓"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "亘胤丕賯丞 丕賱卮丕卮丞: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "兀賷 鬲噩夭卅丞 鬲乇賷丿 鬲睾賷賷乇 丨噩賲賴丕責"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "丕賳毓丕卮 丕賱卮丕卮丞 丕賱乇兀爻賷: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "噩夭乇 丕賱賵賱丕賷丕鬲 丕賱賲鬲丨丿丞"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "鬲夭丕賲賳 丕賱卮丕卮丞 丕賱兀賮賯賷: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "兀丿丕丞 賱賲乇丕賯亘丞 爻噩賱丕鬲 賳馗丕賲賰"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "丕賱卮丕卮丞: %s\n"
+msgid "Djibouti"
+msgstr "噩賷亘賵鬲賷"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "噩賴丕夭 丕賱賮兀乇丞: %s\n"
+msgid "detected on port %s"
+msgstr "鬲賲 丕賰鬲卮丕賮賴 毓賱賶 丕賱賲賳賮匕 %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "賳賵毓 丕賱賮兀乇丞: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "亘胤丕賯丞 丕賱卮丕卮丞: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "丕賱禺賷丕乇丕鬲: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "賳賯胤丞 丕賱鬲丨賲賷賱: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 噩賴丕夭 DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "丕賱禺丕丿賲: "
+msgid "Splash selection"
+msgstr "丕禺鬲賷丕乇 丕賱卮丕卮丕鬲"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "丕賱毓賳賵丕賳 賷噩亘 兀賳 賷亘丿兀 亘賭 http:// 兀賵 https://"
+msgid "Extended partition not supported on this platform"
+msgstr "丕賱鬲噩夭卅丕鬲 丕賱賲賲鬲丿丞 睾賷乇 賲丿毓賵賲丞 毓賱賶 賴匕賴 丕賱亘賷卅丞"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "乇噩丕亍 兀丿禺賱 毓賳賵丕賳 禺丕丿賲 WebDav"
+msgid "ISDN Configuration"
+msgstr "鬲賴賷卅丞 ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "賳賯胤丞 丕賱鬲丨賲賷賱"
+msgid "high"
+msgstr "賲乇鬲賮毓"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "禺丕丿賲"
+msgid "Internet Connection Sharing"
+msgstr "賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "丨賲賱"
+msgid "Choose file"
+msgstr "丕丨鬲賷丕乇 賲賱賮"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "丕丨匕賮 丕賱鬲丨賲賷賱"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"鬲丨匕賷乇! 鬲賲 廿賷噩丕丿 廿毓丿丕丿 噩丿丕乇 賳丕乇賷 賲賵噩賵丿 賲爻亘賯丕. 乇亘賲丕 鬲丨鬲丕噩 丕賱賶 丕氐賱丕丨 賷丿賵賷 亘毓丿 "
+"丕賱鬲孬亘賷鬲."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "噩丿賷丿"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Printing/Photo Card Access on \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV 賴賵 亘乇鬲賵賰賵賱 賷爻賲噩 賱賰 亘鬲丨賲賷賱 丿賱賷賱 賮賷 禺丕丿賲 丕賱賵賷亘 亘卮賰賱\n"
-"賲丨賱賷, 賵 賲毓丕賲賱鬲賴 賰賳馗丕賲 賲賱賮丕鬲 賲丨賱賷 (賷噩亘 兀賳 賷賰賵賳 禺丕丿賲 丕賱賵賷亘 賲毓丿賾\n"
-"賰禺丕丿賲 WebDAV). 丕匕丕 賰賳鬲 鬲乇賷丿 丕囟丕賮丞 賳賯丕胤 鬲丨賲賷賱\n"
-"WebDAV, 丕禺鬲乇 \"噩丿賷丿\"."
+"賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲匕賰賵乇丞 兀毓賱丕賴 兀賲 毓賱賶 丕賱胤丕亘毓丕鬲 賮賷 丕賱卮亘賰丞 "
+"丕賱賲丨賱賷丞責\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "丕爻鬲禺丿賲 ``%s'' 亘丿賱丕 賲賳 匕賱賰"
+msgid "Printer default settings"
+msgstr "丕毓丿丕丿丕鬲 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "丕賱賳賵毓"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generic PS2 Wheel Mouse"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "丕爻鬲禺丿賲 ``丕夭丕賱丞 丕賱鬲丨賲賷賱'' 兀賵賱丕"
+msgid "Removing old printer \"%s\"..."
+msgstr "噩丕乇賷 丕夭丕賱丞 丕賱胤丕亘毓丞 丕賱賯丿賷賲丞 \"%s\" ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "廿賱睾丕亍"
+msgid "Select a device !"
+msgstr "丕禺鬲乇 噩賴丕夭丕賸!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "丕賳卮丕亍 鬲噩夭卅丞"
+msgid "Remove selected server"
+msgstr "丕丨匕賮 丕賱禺丕丿賲 丕賱賲禺鬲丕乇"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "兀賳賵丕毓 兀賳馗賲丞 丕賱賲賱賮丕鬲:"
+msgid "French Southern Territories"
+msgstr "賲賳丕胤賯 噩賳賵亘 賮乇賳爻丕"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "賮丕乇睾"
+msgid "the vendor name of the processor"
+msgstr "丕爻賲 賲氐賳賾毓 丕賱賲毓丕賱噩"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 賴匕賴 丕賱鬲噩夭卅丞 賷噩亘 丨賮馗賴丕 丕丨鬲賷丕胤賷丕"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "噩丕乇賷 鬲孬亘賷鬲 丕賱丨夭賲丞 %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 丕賱噩賴丕夭 賵 鬲賴賷卅丞 HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "丕賱鬲亘丿賷賱"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "賱賰賷 鬲賲鬲賱賰 鬲噩夭卅丕鬲 兀賰孬乇, 賷乇噩賶 丕賱睾丕亍 鬲噩夭卅丞 賰賷 鬲鬲賲賰賳 賲賳 毓賲賱 鬲噩夭卅丞 賲賲鬲丿丞"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"鬲賲 鬲賴賷卅丞 丕賱胤丕亘毓丞 丌賱賷丕賸 賱賰賷 鬲毓胤賷賰 丕賱賯丿乇丞 毓賱賶 丕賱賵氐賵賱 丕賱賶 爻賵丕賯丕鬲 亘胤丕賯丕鬲 丕賱氐賵乇 "
+"毓賱賶 噩賴丕夭賰 丕賱卮禺氐賷. 賷賲賰賳賰 丕賱丌賳 丕賱賵氐賵賱 丕賱賶 亘胤丕賯丕鬲 丕賱氐賵乇 亘丕爻鬲禺丿丕賲 丕賱亘乇賳丕賲噩 "
+"丕賱乇爻賵賲賷 \"MToolsFM\" (丕賱賯丕卅賲丞: \"鬲胤亘賷賯丕鬲\" -> \"兀丿賵丕鬲 丕賱賲賱賮丕鬲\" -> \"賲丿賷乇 "
+"賲賱賮丕鬲 MTools\") 兀賵 亘丕爻鬲禺丿丕賲 兀丿賵丕鬲 \"mtools\" 賮賷 爻胤乇 丕賱兀賵丕賲乇 (兀丿禺賱 \"man "
+"mtools\" 賮賷 爻胤乇 丕賱兀賵丕賲乇 賱賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲). 賷賲賰賳賰 丕賷噩丕丿 賳馗丕賲 賲賱賮丕鬲 丕賱亘胤丕賯丞 "
+"鬲丨鬲 丨乇賮 丕賱爻賵丕賯丞 \"p:\", 兀賵 丨乇賵賮 丕賱爻賵丕賯丕鬲 丕賱兀禺乇賶 丕匕丕 賰丕賳鬲 賱丿賷賰 兀賰孬乇 賲賳 胤丕亘毓丞 "
+"HP 賲毓 爻賵丕賯丕鬲 亘胤丕賯丕鬲 氐賵乇. 賮賷 \"MToolsFM\" 賷賲賰賳賰 丕賱鬲丨賵賷賱 亘賷賳 丨乇賵賮 丕賱爻賵丕賯丕鬲 毓賱賶 "
+"丕賱丨賯賱 丕賱賲賵噩賵丿 賮賷 丕賱乇賰賳 丕賱兀賷爻乇 丕賱賶 丕賱兀毓賱賶 賮賷 賯賵丕卅賲 丕賱賲賱賮丕鬲."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "丕禺鬲乇 丕賱丨夭賲 丕賱鬲賷 爻鬲購孬亘賾賻鬲"
-#
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "賳毓匕乇 丕賷噩丕丿 兀賯乇丕氐 氐賱亘丞"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" 亘毓囟 兀禺胤丕亍 sendmail 賷賰賵賳 爻亘亘賴丕 \n"
+" 鬲賴賷卅丞 爻賷卅丞 賲賳 postfix. 賱丨賱 賴匕丕 丕賱賲卮賰賱丞 毓賱賷賰\n"
+" 鬲毓賷賷賳 myhostname 兀賵 mydomain 賮賷 賲賱賮 /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "賮囟賱丕 丕囟睾胤 毓賱賶 鬲噩夭卅丞"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "賰賱 丕賱鬲噩夭卅丕鬲 賵 亘賷丕賳丕鬲賴丕 爻鬲囟賷毓 賲賳 毓賱賶 丕賱爻賵丕賯丞 %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr "賱丕 賷賵噩丿 賮賷 賳馗丕賲賰 賲爻丕丨丞 賲鬲亘賯丞 鬲賰賮賷 賱賱鬲孬亘賷鬲 兀賵 丕賱鬲乇賯賷丞 (%d > %d)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-"賱丿賷賰 鬲噩夭卅丞 Microsofr Windows 賰亘賷乇丞.\n"
-"丕賯鬲乇丨 兀賳 鬲睾賷乇 丨噩賲 賴匕賴 丕賱鬲噩夭卅丞\n"
-"(丕囟睾胤 毓賱賷賴丕 孬賲 丕禺鬲乇 \"鬲睾賷賷乇 丕賱丨噩賲\")"
+"賰賱 胤丕亘毓丞 鬲丨鬲丕噩 丕賱賶 丕爻賲 (賲孬丕賱 \"printer\"). 丨賯賵賱 丕賱賵氐賮 賵 丕賱賲賰丕賳 賱賷爻 賲賳 "
+"丕賱囟乇賵乇賷 賲賱丐賴丕. 丕賳賴丕 賲噩乇丿 賲賱丕丨馗丕鬲 賱賱賲爻鬲禺丿賲賷賳."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"%s\": 丕賱賳賯乇 毓賱賶 \"%s\" 爻賷賮鬲丨 賲毓丕賱噩 鬲賴賷卅丞\n"
+"丕賱胤丕亘毓丞. 丕賯乇兀 丕賱賮囟賱 丕賱賲禺鬲氐 賮賷 ``丿賱賷賱 丕賱賲亘鬲丿卅''\n"
+"賱賰夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲 毓賳 賰賷賮賷丞 丕毓丿丕丿 胤丕亘毓丞 噩丿賷丿丞. 丕賱賵丕噩賴丞\n"
+"賴賳丕賰 賲賲丕孬賱丞 賱鬲賱賰 丕賱賲爻鬲禺丿賲丞 兀孬賳丕亍 丕賱鬲孬亘賷鬲."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "丕禺鬲乇 丨丿孬"
+msgid "Bhutan"
+msgstr "亘賵鬲丕賳"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Wizard"
-msgstr "丕賱賲毓丕賱噩"
+msgid "Network interface"
+msgstr "賵丕噩賴丞 丕賱卮亘賰丞 "
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"丕匕丕 賰賳鬲 鬲乇賷丿 丕爻鬲禺丿丕賲 aboot, 賮賱丕 鬲賳爻賶 兀賳 鬲鬲乇賰 賲爻丕丨丞 賮丕乇睾丞 賮賷\n"
-"亘丿丕賷丞 丕賱賯乇氐 (2048 賯胤丕毓丕鬲 賰丕賮賷丞)"
+msgid "Reading printer data..."
+msgstr "噩丕乇賷 賯乇丕亍丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丞..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "乇噩丕亍 賯賲 亘毓賲賱 賳爻禺丞 丕丨鬲賷丕胤賷丞 賲賳 亘賷丕賳丕鬲賰 兀賵賱丕"
+msgid "Korean keyboard"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱賰賵乇賷丞"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Read carefully!"
-msgstr "丕賯乇兀 噩賷丿丕!"
+msgid "Not connected"
+msgstr "睾賷乇 賲鬲氐賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "賲賮丕鬲丨 丕賱鬲卮賮賷乇 (賲乇丞 兀禺乇賶)"
+msgid "Greek"
+msgstr "丕賱賷賵賳丕賳賷丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "賲賮丕鬲丨 丕賱鬲卮賮賷乇"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "賲賮丕鬲賷丨 丕賱鬲卮賮賷乇 睾賷乇 賲鬲胤丕亘賯丞"
+msgid "Saint Kitts and Nevis"
+msgstr "爻丕賳鬲 賰賷鬲爻 賵 賳賷賮賷爻"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "賲賮鬲丕丨 丕賱鬲卮賮賷乇 賴匕丕 亘爻賷胤 噩丿丕 (賷噩亘 兀賳 賷賰賵賳 %d 丨乇賮丕 毓賱賶 丕賱兀賯賱)"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"鬲賲 丕賱賳賯賱 亘賳噩丕丨\n"
+"乇亘賲丕 鬲乇賷丿 丕賱鬲丨賯賯 丕匕丕 賰丕賳 賷賲賰賳賰 丕賱丿禺賵賱 丕賱賶 禺丕丿賲 亘丕賱兀賲乇:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"丿賵賳 鬲賳亘賷賴賰 丕賱賶 丕丿禺丕賱 賰賱賲丞 賲乇賵乇."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "丕禺鬲乇 賲賮鬲丕丨 鬲卮賮賷乇 賳馗丕賲 丕賱賲賱賮丕鬲"
+msgid "Enable OF Boot?"
+msgstr "鬲賲賰賷賳 丕賯賱丕毓 OF責"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "賲賮鬲丕丨 鬲卮賮賷乇 賳馗丕賲 丕賱賲賱賮丕鬲"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 JFS 賱賱鬲噩夭卅丕鬲 兀氐睾乇 賲賳 16 賲賷睾丕亘丕賷鬲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "丕賱賳賵毓: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "丕賳毓丕卮 丕賱卮丕卮丞 丕賱乇兀爻賷: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "毓賱賶 丕賱賯賳丕丞 %d id %d\n"
+msgid "path"
+msgstr "丕賱賲爻丕乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "賳賵毓 噩丿賵賱 丕賱鬲賯爻賷賲: %s\n"
+msgid "Mount point"
+msgstr "賳賯胤丞 丕賱鬲丨賲賷賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "兀賯乇丕氐 LVM %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"馗賴乇 禺胤兀:\n"
+"%s\n"
+"丨丕賵賱 鬲睾賷賷乇 亘毓囟 丕賱賲毓丕賲賱丕鬲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "賲毓賱賵賲丕鬲: "
+msgid "Restore system"
+msgstr "丕爻鬲毓丿 丕賱賳賾馗丕賲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "丕賱賴賳丿爻丞: %s 丕爻胤賵丕賳丞, %s 乇兀爻, %s 賯胤丕毓\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "鬲賵丨丿 賲丕賰賷賳丕鬲 賷噩亘 兀賳 鬲賰賵賳 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲賵氐賵賱丞 賲丨賱賷丕賸 賲鬲賵賮乇丞 賱賴丕:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "丕賱丨噩賲: %s\n"
+msgid "The DHCP end ip"
+msgstr "DHCP end ip"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "賱賱賯乇丕亍丞 賮賯胤"
+msgid "Another one"
+msgstr "丌禺乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "丕賱噩賴丕夭: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"鬲噩夭卅丞 丕賱廿賯賱丕毓\n"
-"賴匕賴 賴賷\n"
-"賱賱廿賯賱丕毓 丕賱賲夭丿賵噩 賮賷 賳馗丕賲賰.\n"
+msgid "Colombia"
+msgstr "賰賵賱賵賲亘賷丕"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"丕賱廿毓丿丕丿 丕賱丨丕賱賷 賱賭`%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"丕賱卮亘賰丞: %s\n"
+"毓賳賵丕賳 丕賱賭IP: %s\n"
+"氐賮丞 丕賱賭IP: %s\n"
+"丕賱賲卮睾賱: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "丕爻賲 賲賱賮 Loopback: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "兀賯乇丕氐 RAID %s\n"
+msgid "Reunion"
+msgstr "乇賷賵賳賷賵賳"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "丨噩賲 Chunk %s\n"
+msgid "Details"
+msgstr "鬲賮丕氐賷賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "丕賱賲爻鬲賵賶 %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "賱兀爻亘丕亘 兀賲賳賷丞, 爻賷鬲賲 賯胤毓 丕賱廿鬲氐丕賱 丕賱丌賳."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"丕賱鬲噩夭卅丞 丕賱鬲賷 賷鬲賲 丕賯賱丕毓賴丕 丕賮鬲乇丕囟賷丕\n"
-" (賱賭 MS-DOS 賵 賱賷爻 賱賭 lilo)\n"
+msgid "Synchronization tool"
+msgstr "DrakSync"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking your system..."
+msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 賳馗丕賲賰..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print"
+msgstr "廿胤亘毓"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"賲賱賮(丕鬲) Loopback:\n"
-" %s\n"
+"兀丿禺賱 丕賱卮乇賷胤 亘丕賱毓賱丕賲丞 %s\n"
+" 賮賷 噩賴丕夭 丕賱卮乇賷胤 %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Mongolia"
+msgstr "賲賳睾賵賱賷丕"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "賲丨賲賱\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "睾賷乇 賲噩賴夭\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "賲噩賴夭\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "丕賱丕爻胤賵丕賳丞 %d 丕賱賶 %d\n"
+msgid "Restore Users"
+msgstr "兀毓丿 丕賱賲爻鬲禺丿賲賷賳 "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s 賯胤丕毓"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "賲賮丕鬲丨 丕賱鬲卮賮賷乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "丕賱丨噩賲: %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"賷賯賵賲 portmapper 亘廿丿丕乇丞 丕鬲氐丕賱丕鬲 RPC, 賵 丕賱鬲賷 鬲爻鬲禺丿賲 毓賳 胤乇賷賯\n"
+"亘乇賵鬲賵賰賵賱丕鬲 賲孬賱 NFS 賵 NIS. 禺丕丿賲 portmap 賲賳 丕賱賱丕夭賲 兀賳 賷毓賲賱 毓賱賶 丕賱兀噩賴夭丞\n"
+"丕賱鬲賷 鬲毓賲賱 賰禺丕丿賲丕鬲 鬲爻鬲禺丿賲 丕賱亘乇賵鬲賵賰賵賱丕鬲 丕賱鬲賷 鬲爻鬲賮賷丿 賲賳 丌賱賷丞 毓賲賱 RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "丕賱亘丿丕賷丞: 賯胤丕毓 %s\n"
+msgid "Detected hardware"
+msgstr "丕賱毓鬲丕丿 丕賱賲購賰鬲卮賮"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: "
-msgstr "丕賱丕爻賲: "
+msgid "Mauritius"
+msgstr "賲賵乇賷卮賷賵爻"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "丨乇賮 爻賵丕賯丞 DOS: %s (賲噩乇丿 鬲禺賲賷賳)\n"
+msgid "Myanmar (Burmese)"
+msgstr "賲賷丕賳賲丕乇 (丕賱亘賵乇賲賷丞)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "丕賱鬲噩夭卅丞 %s 賲毓乇賵賮丞 丕賱丌賳 亘丕賱廿爻賲 %s"
+msgid "Enabling swap partition %s"
+msgstr "噩丕乇賷 鬲賲賰賷賳 鬲噩夭卅丞 丕賱鬲亘丿賷賱 %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "噩丕乇賷 丕夭丕賱丞 %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"賱丕 鬲賵噩丿 鬲噩夭卅丞 FAT 賱丕爻鬲禺丿丕賲賴丕 賰賭 loopback (兀賵 賱丕 鬲賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賲鬲亘賯賷丞)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "噩丕乇賷 賳爻禺 %s"
+msgid "Armenian (old)"
+msgstr "丕賱兀乇賲賷賳賷丞 (賯丿賷賲)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "噩丕乇賷 賳賯賱 丕賱賲賱賮丕鬲 丕賱賶 丕賱鬲噩夭卅丞 丕賱噩丿賷丿丞"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"丕賱胤丕亘毓丞 丕賱賲爻賲丕丞 \"%s\" 賲賵噩賵丿丞 賲爻亘賯丕 鬲丨鬲 %s. \n"
+"丕賳賯乇 \"丕賳賯賱\" 賱賱賰鬲丕亘丞 賮賵賯賴.\n"
+"賷賲賰賳賰 賰匕賱賰 賰鬲丕亘丞 丕爻賲 噩丿賷丿 兀賵 鬲丨胤賷 賴匕賴 丕賱胤丕亘毓丞."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"丕賱丿賱賷賱 %s 賷丨鬲賵賷 賲爻亘賯丕 毓賱賶 亘毓囟 丕賱亘賷丕賳丕鬲\n"
-"(%s)"
+"丕毓孬乇 毓賱賶 丨賱賵賱 賱賲卮丕賰賱賰 亘丕爻鬲禺丿丕賲 亘賷卅丞 丕賱丿毓賲 丕賱賮賳賷 毓賱賶 丕賱廿賳鬲乇賳鬲 賮賷 MandrakeSoft"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hide files"
-msgstr "禺亘卅 丕賱賲賱賮丕鬲"
+msgid ", host \"%s\", port %s"
+msgstr ", 丕賱賲爻鬲囟賷賮 \"%s\", 丕賱賲賳賮匕 %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "丕賳賯賱 丕賱賲賱賮丕鬲 丕賱賶 鬲噩夭卅丞 噩丿賷丿丞"
+msgid "Monaco"
+msgstr "賲賵賳丕賰賵"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "亘毓丿 鬲賴賷卅丞 丕賱鬲賯爻賷賲 %s, 賮廿賳 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱鬲噩夭卅丞 爻鬲賮賯丿"
+msgid "%s formatting of %s failed"
+msgstr "%s 鬲噩賴賷夭 %s 賯丿 賮卮賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "爻鬲丨鬲丕噩 丕賱賶 丕毓丕丿丞 丕賱鬲卮睾賷賱 賯亘賱 兀賳 賷鬲賲 鬲賮毓賷賱 丕賱鬲毓丿賷賱丕鬲"
+msgid "Partitioning failed: %s"
+msgstr "賮卮賱鬲 丕賱鬲噩夭卅丞: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "噩丿賵賱 丕鬲鬲賯爻賷賲 賱賱賯乇氐 %s 爻賷鬲賲 賰鬲丕亘鬲賴 丕賱賶 丕賱賯乇氐!"
+msgid "Canada (cable)"
+msgstr "賰賳丿丞 (cable)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "丕賱丨夭賲丞 %s 賷噩亘 兀賳 鬲購孬亘賾鬲. 賴賱 鬲乇賷丿 鬲孬亘賷鬲賴丕責"
+msgid "Upgrade"
+msgstr "鬲乇賯賷丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "兀賷 賳賵毓 賲賳 丕賱鬲噩夭卅丞責"
+msgid "Workstation"
+msgstr "賲丨胤丞 毓賲賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "賰賳 丨匕乇丕: 賴匕賴 丕賱毓賲賱賷丞 禺胤賷乇丞"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"噩丕乇賷 鬲孬亘賷鬲 丕賱丨夭賲丞 %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "chunk size"
-msgstr "丨噩賲 chunk"
+msgid "Kyrgyzstan"
+msgstr "賯賷乇睾賷夭爻鬲丕賳"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "丕賱賲爻鬲賵賶"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "賲毓 賵孬丕卅賯 丕賱賲爻丕毓丿丞 丕賱兀爻丕爻賷丞 (賲賮囟賾賱)"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../services.pm:1
#, c-format
-msgid "device"
-msgstr "賵丨丿丞"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron 兀丿丕丞 賱鬲卮睾賷賱 丕賱兀賵丕賲乇 賮賷 兀賵賯丕鬲 賲丨丿丿丞."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Various"
-msgstr "賲鬲賳賵毓丞"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"賷噩亘 兀賳 鬲賰賵賳 賱丿賷賰 鬲噩夭卅丞 噩匕乇賷丞.\n"
+"賱賴匕丕 丕賱睾乇囟 丕賳卮卅 鬲噩夭卅丞 (兀賵 丕賳賯乇 毓賱賶 鬲噩夭卅丞 賲賵噩賵丿丞).\n"
+"孬賲 丕禺鬲乇 ``賳賯胤丞 丕賱鬲丨賲賷賱'' 賵 丕噩毓賱賴丕 `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mount options"
-msgstr "禺賷丕乇丕鬲 丕賱鬲丨賲賷賱"
+msgid "Proxy should be http://..."
+msgstr "丕賱亘乇賵賰爻賷 賷噩亘 兀賳 賷賰賵賳 http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "丕賱賲賱賮 賲賵噩賵丿 賲爻亘賯丕, 賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲賴責"
+msgid "South Africa"
+msgstr "噩賳賵亘 兀賮乇賷賯賷丕 "
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "賴匕丕 丕賱賲賱賮 賲爻鬲禺丿賲 賲賳 loopback 兀禺乇賶, 丕禺鬲乇 賲賱賮丕 丌禺乇"
+msgid "Western Sahara"
+msgstr "丕賱氐丨乇丕亍 丕賱睾乇亘賷丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Give a file name"
-msgstr "丕毓胤 丕爻賲 賲賱賮"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "賳賵毓 賳馗丕賲 丕賱賲賮丕鬲: "
+msgid "Modify printer configuration"
+msgstr "鬲毓丿賷賱 丕毓丿丕丿丕鬲 丕賱胤丕亘毓丞"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "丕賱丨噩賲 亘丕賱賷睾丕亘丕賷鬲: "
+msgid "Choose a partition"
+msgstr "廿禺鬲乇 鬲噩夭卅丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "丕爻賲 賲賱賮 Loopback: "
+msgid "Edit current rule"
+msgstr "丨乇賾乇 丕賱賯丕毓丿丞 丕賱丨丕賱賷丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "賴匕賴 丕賱鬲噩夭卅丞 賱丕 賷賲賰賳 丕爻鬲禺丿丕賲賴丕 賱賭loopback"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "丕爻賲 LVM責"
+msgid "Please test the mouse"
+msgstr "賲賳 賮囟賱賰 丕禺鬲亘乇 丕賱賮兀乇丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "噩丿賷丿"
+msgid "Other Media"
+msgstr "賵爻賷胤 丌禺乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "丕禺鬲乇 LVM l,噩賵丿 賱賱丕囟丕賮丞"
+msgid "Backup system files"
+msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "丕禺鬲乇 RAID 賲賵噩賵丿 賱賱丕囟丕賮丞"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "噩丕乇賷 賳賯賱 丕賱鬲噩夭卅丞..."
+msgid "Sector"
+msgstr "丕賱賯胤丕毓"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Moving"
-msgstr "噩丕乇賷 丕賱賳賯賱"
+msgid "Qatar"
+msgstr "賯胤乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "兀賷 賯胤丕毓 鬲乇賷丿 賳賯賱賴責"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sector"
-msgstr "丕賱賯胤丕毓"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "賱丕 賷賲賰賳賰 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲丞 賱兀賳賴 賱丕 賷賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賲鬲亘賯賷丞 賱鬲孬亘賷鬲賴丕"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "兀賷 賯乇氐 鬲乇賷丿 賳賯賱賴責"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "丕賳卮卅 賯乇氐 鬲孬亘賷鬲 丌賱賷"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Move"
-msgstr "賳賯賱"
+msgid "Dialing mode"
+msgstr "賵囟毓賷丞 丕賱廿鬲氐丕賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "丕賱丨噩賲 丕賱噩丿賷丿 亘丕賱賲賷睾丕亘丕賷鬲: "
+msgid "File sharing"
+msgstr "賲卮丕乇賰丞 丕賱賲賱賮丕鬲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "丕禺鬲乇 丕賱丨噩賲 丕賱噩丿賷丿"
+msgid "Clean /tmp at each boot"
+msgstr "賯賲 亘鬲賳馗賷賮 /tmp 毓賳丿 賰賱 廿賯賱丕毓"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resize"
-msgstr "鬲睾賷賷乇 丕賱丨噩賲"
+msgid "Malawi"
+msgstr "賲丕賱丕賵賷"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "亘毓丿 鬲睾賷賷乇 丨噩賲 丕賱鬲噩夭卅丞 %s, 賮廿賳 賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 賴匕賴 丕賱鬲噩夭卅丞 爻鬲賮賯丿"
+msgid "Please choose your type of mouse."
+msgstr "賮囟賱丕賸 丕禺鬲乇 賳賵毓 丕賱賮兀乇丞."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 賴匕賴 丕賱鬲噩夭卅丞 賷噩亘 丨賮馗賴丕 丕丨鬲賷丕胤賷丕"
+msgid "class of hardware device"
+msgstr "賮卅丞 噩賴丕夭 丕賱毓鬲丕丿"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "賴匕丕 丕賱鬲賯爻賷賲 睾賷乇 賯丕亘賱 賱鬲睾賷賷乇 丕賱丨噩賲"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
+"賴匕賴 賴賷 丕賱賲丕賰賷賳丕鬲 賵 丕賱卮亘賰丕鬲 丕賱鬲賷 賷噩亘 兀賳 鬲賰賵賳 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賲鬲賵賮乇丞 賱賴丕:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "噩丕乇賷 丨爻丕亘 乇賵丕亘胤 賳馗丕賲 賲賱賮丕鬲 FAT"
+msgid "United Kingdom"
+msgstr "丕賱賲賲賱賰丞 丕賱賲鬲丨丿丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "兀賷賳 鬲乇賷丿 鬲丨賲賷賱 丕賱噩賴丕夭 %s責"
+msgid "running"
+msgstr "鬲毓賲賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"賱賲 賷賲賰賳 丕夭丕賱丞 鬲毓賷賷賳 賳賯胤丞 丕賱鬲丨賲賷賱 賳馗乇丕 賱兀賳 賴匕賴 丕賱鬲噩夭卅丞 賲爻鬲禺丿賲丞 賱賭loop back.\n"
-"賯賲 亘廿夭丕賱丞 丕賱賭loopback 兀賵賱丕"
+msgid "default"
+msgstr "丕賱賲乇噩毓"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "兀賷賳 鬲乇賷丿 鬲丨賲賷賱 丕賱噩賴丕夭 %s責"
+msgid "Indonesia"
+msgstr "丕賳丿賵賳賷爻賷丕"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "兀賷賳 鬲乇賷丿 鬲丨賲賷賱 賲賱賮 loopback %s責"
+msgid "France [SECAM]"
+msgstr "賮乇賳爻丕 [爻賷賰丕賲]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "噩丕乇賷 丕賱鬲睾賷賷乇 賲賳 ext2 丕賱賶 ext3"
+msgid "restrict"
+msgstr "鬲卮丿賷丿"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "兀賷 賳馗丕賲 賲賱賮丕鬲 鬲乇賷丿責"
+msgid "must have"
+msgstr "賷噩亘 兀賳 賷賰賵賳 賱丿賷賰"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "睾賷乇 賳賵毓 丕賱鬲噩夭卅丞"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS 賱丕 賷丿毓賲 丕賱胤丕亘毓丕鬲 毓賱賶 兀噩賴夭丞 Novell 丕賱禺丕丿賲丞 兀賵 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲乇爻賱 "
+"丕賱亘賷丕賳丕鬲 丕賱賶 兀賲乇 丨乇.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "亘毓丿 鬲睾賷賷乇 賳賵毓 丕賱鬲噩夭卅丞 %s, 賮廿賳賰 爻鬲爻禺乇 賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 丕賱鬲噩夭卅丞"
+msgid "Senegal"
+msgstr "丕賱爻賳睾丕賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "賴賱 鬲乇賷丿 丕夭丕賱丞 賲賱賮 loopback責"
+msgid "Command line"
+msgstr "爻胤乇 丕賱兀賵丕賲乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"賱丕 賷賲賰賳賰 丕賳卮丕亍 鬲噩夭卅丞 噩丿賷丿丞\n"
-"(賱兀賳賰 賵氐賱鬲 丕賱賶 丕賱毓丿丿 丕賱兀賯氐賶 賲賳 丕賱鬲噩夭卅丕鬲 丕賱兀爻丕爻賷丞).\n"
-"兀賵賱丕賸 丕禺匕賮 鬲噩夭卅丞 兀爻丕爻賷丞 賵 賯賲 亘廿賳卮丕亍 鬲噩夭卅丞 賲賲鬲丿丞."
+"禺賷丕乇丕鬲賳丕 丕賱賰孬賷乇 賲賳 丨賱賵賱 賳馗丕賲 賱賷賳賰爻 亘丕賱廿囟丕賮丞 丕賱賶 丕賱毓乇賵囟 丕賱禺丕氐丞 賵 丕賱賲賳鬲噩丕鬲 "
+"丕賱兀禺乇賶賶 賲鬲賵賮乇丞 賮賷 賲鬲噩乇賳丕 丕賱兀賱賰鬲乇賵賳賷:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "丕賱鬲賮囟賷賱: "
+msgid "access to administrative files"
+msgstr "丕賱賵氐賵賱 丕賱賶 賲賱賮丕鬲 丕賱廿丿丕乇丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "賯胤丕毓 丕賱亘丿丕賷丞: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"禺胤兀 兀孬賳丕亍 丕乇爻丕賱 丕賱亘乇賷丿.\n"
+" 賱賲 賷鬲賲 丕乇爻丕賱 鬲賯乇賷乇 丕賱亘乇賷丿.\n"
+" 賮囟賱丕賸 賯賲 亘廿毓丿丕丿 sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "丕賳卮卅 鬲噩夭卅丞 噩丿賷丿丞"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮 毓賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "丕爻鬲禺丿賲 賱賭loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "鬲毓丿賷賱 RAID"
+msgid "Montserrat"
+msgstr "賲賵賳鬲爻賷乇丕鬲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "丕夭丕賱丞 賲賳 LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "丕夭丕賱丞 賲賳 RAID"
+msgid "Swap"
+msgstr "丕賱鬲亘丿賷賱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "丕囟丕賮丞 丕賱賶 LVM"
+msgid "Connecting to the Internet "
+msgstr "噩丕乇賷 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "丕囟丕賮丞 丕賱賶 RAID"
+msgid "Restore Other"
+msgstr "丕爻鬲毓丿 丌禺乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "鬲賳爻賷賯"
+msgid "TV card"
+msgstr "亘胤丕賯丞 丕賱鬲賱賮丕夭"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "賲毓賱賵賲丕鬲 賲賮氐賾賱丞"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "噩丕乇賷 賲丨丕賵賱丞 丕賳賯丕匕 噩丿賵賱 丕賱鬲賯爻賷賲"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"兀丿禺賱 賯乇氐丕 賲乇賳丕 賮賷 丕賱爻賵丕賯丞\n"
-"賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 丕賱賯乇氐 爻鬲賲丨賶"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "鬲丨匕賷乇"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "丕禺鬲乇 賲賱賮"
+msgid "Remove selected host/network"
+msgstr "丕丨匕賮 丕賱賲爻鬲囟賷賮/丕賱卮亘賰丞 丕賱賲禺鬲丕乇丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"噩丿賵賱 丕賱鬲賯爻賷賲 丕賱賲丨賮賵馗 賱賷爻 亘賳賮爻 丕賱丨噩賲\n"
-"賱丕 夭賱鬲 鬲乇賷丿 丕賱廿賰賲丕賱責"
+"Postfix 賴賵 毓賲賷賱 賱賳賯賱 丕賱亘乇賷丿, 兀賷 丕賱亘乇賳丕賲噩 丕賱匕賷 賷賳賯賱 丕賱亘乇賷丿 賲賳 噩賴丕夭 丕賱賶 丌禺乇."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "丕賱鬲丨賲賷賱 丕賱丌賱賷 賱賱賵爻丕卅胤 丕賱賯丕亘賱丞 賱賱廿夭丕賱丞"
+msgid "Disconnection from the Internet failed."
+msgstr "賮卮賱 賯胤毓 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "廿毓丕丿丞 鬲丨賲賷賱 噩丿賵賱 丕賱鬲賯爻賷賲"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"賴賳丕 賷賲賰賳賰 丕禺鬲賷丕乇 丕禺鬲氐丕乇丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲賷 \n"
+"爻鬲爻賲丨 賱賰 亘丕賱鬲亘丿賷賱 亘賷賳 賱睾丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱賲禺鬲賱賮丞\n"
+"(賲孬賱丕賸: 賱丕鬲賷賳賷 賵 睾賷乇 賱丕鬲賷賳賷)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "廿賳賯丕匕 噩丿賵賱 丕賱鬲賯爻賷賲"
+msgid "Network Hotplugging"
+msgstr "Network Hotplugging"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "丕爻鬲毓丕丿丞 噩丿賵賱 丕賱鬲賯爻賷賲"
+msgid "if set to yes, reports check result to tty."
+msgstr "if set to yes, reports check result to tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "丨賮馗 噩丿賵賱 丕賱鬲賯爻賷賲"
+msgid "Restore From CD"
+msgstr "丕爻鬲毓丕丿丞 賲賳 丕賱賯乇氐 丕賱賲丿賲噩"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "賱賰賷 鬲賲鬲賱賰 鬲噩夭卅丕鬲 兀賰孬乇, 賷乇噩賶 丕賱睾丕亍 鬲噩夭卅丞 賰賷 鬲鬲賲賰賳 賲賳 毓賲賱 鬲噩夭卅丞 賲賲鬲丿丞"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 噩賴丕夭賰 賱賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲.\n"
+"亘丕爻鬲禺丿丕賲 賴匕賴 丕賱賲賷夭丞 爻賷賲賰賳 賱賱丨賵丕爻賷亘 丕賱兀禺乇賶 賮賷 丕賱卮亘賰丞 丕賱賲丨賱賷丞 兀賳 鬲爻鬲禺丿賲 賵氐賱丞 "
+"丕賱賰賲亘賷賵鬲乇 賱賴匕丕 丕賱丨丕爻賵亘.\n"
+"\n"
+"鬲兀賰丿 賲賳 兀賳賰 賯賲鬲 亘鬲賴賷卅丞 賵氐賱丞 丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 亘丕爻鬲禺丿丕賲 drakconnect 賯亘賱 "
+"丕賱賲鬲丕亘毓丞.\n"
+"\n"
+"賲賱丨賵馗丞: 鬲丨鬲丕噩 丕賱賶 賲賵丕卅賲 賱賱卮亘賰丞 賰賷 鬲賯賵賲 亘廿毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞 (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "賱丕 賷賲賰賳賳賷 丕囟丕賮丞 兀賷 鬲噩夭卅丞 兀禺乇賶"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "賮囟賱丕賸 丕禺鬲乇 賲賵丕卅賲 丕賱廿賳鬲乇賳鬲 丕賱匕賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "賰賱 丕賱鬲噩夭卅丕鬲 丕賱乇卅賷爻賷丞 賲爻鬲禺丿賲丞"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "丕賱賵氐賵賱 丕賱賶 亘胤丕賯丞 丕賱匕丕賰乇丞 毓賱賶 噩賴丕夭 HP 賲鬲毓丿丿 丕賱賵馗丕卅賮"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "賲毓賱賵賲丕鬲 丕賱賯乇氐 丕賱氐賱亘"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"MandrakeSoft 鬲毓賲賱 噩賳亘丕賸 丕賱賶 噩賳亘 賲毓 兀賮囟賱 丕賱卮乇賰丕鬲 丕賱鬲賷 鬲賵賮乇 丨賱賵賱 賱丨鬲乇丕賮賷丞 "
+"賲鬲賵丕賮賯丞 賲毓 Mandrake Linux. 鬲賵噩丿 賯丕卅賲丞 亘賴丐賱丕亍 丕賱卮乇賰丕亍 賮賷 MandrakeStore"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "鬲丨丿賷丿 丌賱賷"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "賲卮丕乇賰丞 丕鬲氐丕賱 丕賱廿賳鬲乇賳鬲 睾賷乇 賲賲賰賾賻賳丞 丕賱丌賳."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "兀賲爻丨 丕賱賰賱"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "if set to yes, verify checksum of the suid/sgid files."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "賴賱 鬲乇賷丿 丨賮馗 鬲毓丿賷賱丕鬲 /etc/fstab"
+msgid "Latin American"
+msgstr "丕賱兀賲乇賷賰賷丞 丕賱賱丕鬲賷賳賷丞"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "賴賱 鬲乇賷丿 丕賱禺乇賵噩 亘丿賵賳 賰鬲丕亘丞 噩丿賵賱 丕賱鬲賯爻賷賲責"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "鬲睾賷賷乇 賳馗丕賲 丕賱胤亘丕毓丞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "丕賱禺乇賵噩 亘丿賵賳 丕賱丨賮馗"
+msgid "Old device file"
+msgstr "賲賱賮 丕賱噩賴丕夭 丕賱賯丿賷賲"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "賴賱 鬲乇賷丿 丕賱丕賰賲丕賱 毓賱賶 兀賷 丨丕賱責"
+msgid "Info: "
+msgstr "賲毓賱賵賲丕鬲: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "丕賱賳鬲賯丕賱 丕賱賶 賵囟毓賷丞 丕賱禺亘賷乇"
+msgid "Button `%s': %s"
+msgstr "Button `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "丕賱丕賳鬲賯丕賱 丕賱賶 丕賱賵囟毓 丕賱毓丕丿賷"
+msgid "Please wait"
+msgstr "賲賳 賮囟賱賰 丕賳鬲馗乇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "鬲乇丕噩毓"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "禺乇賵噩"
+msgid "None"
+msgstr "賵賱丕 卮卅"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "廿禺鬲乇 鬲噩夭卅丞"
+msgid "The entered IP is not correct.\n"
+msgstr "毓賳賵丕賳 IP 丕賱賲丿購禺賱 睾賷乇 氐丨賷丨.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "廿禺鬲乇 卮丕卮丞"
+msgid "Ethernet Card"
+msgstr "Ethernet Card"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "睾賷賾乇 丕賱賳賵毓"
+msgid "Info"
+msgstr "丕賱賲毓賱賵賲丕鬲"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "丕亘丨孬 賮賷 兀噩賴夭丞 丕賱禺丕丿賲"
+msgid "Install"
+msgstr "孬亘賾鬲"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "丕賱賳胤丕賯"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"丕囟睾胤 \"%s\" 丕匕丕 賰賳鬲 鬲乇賷丿 丨匕賮 賰賱 丕賱鬲噩夭卅丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱賯乇氐\n"
+"丕賱氐賱亘. 禺匕 丨匕乇賰, 亘毓丿 賳賯乇賰 賱夭乇 \"%s\" 賱賳 鬲鬲賲賰賳 賲賳 丕爻鬲毓丕丿丞\n"
+"兀賷 亘賷丕賳丕鬲 兀賵 鬲噩夭卅丕鬲 賰丕賳鬲 賲賵噩賵丿丞 毓賱賶 賴匕丕 丕賱賯乇氐 丕賱氐賱亘.\n"
+"亘賲丕 賮賷賴丕 亘賷丕賳丕鬲 Windows\n"
+"丕賳賯乇 \"%s\" 賱廿賷賯丕賮 賴匕賴 丕賱毓賲賱賷丞 丿賵賳 禺爻丕乇丞 兀賷 亘賷丕賳丕鬲 兀賵 鬲噩夭卅丕鬲\n"
+"賲賵噩賵丿丞 毓賱賶 丕賱賯乇氐 丕賱氐賱亘."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "丕爻賲 丕賱賲爻鬲禺丿賲"
+msgid "Exit install"
+msgstr "丕賱禺乇賵噩 賲賳 丕賱鬲孬亘賷鬲"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕爻賲 丕賱賲爻鬲禺丿賲, 賰賱賲丞 丕賱賲乇賵乇 賵 丕賱賳胤丕賯 丕賱禺丕氐 亘賰 賱賱丿禺賵賱 丕賱賶 賴匕丕 "
-"丕賱賲爻鬲囟賷賮."
+"鬲賲 廿毓丿丕丿 賰賱 卮卅.\n"
+"賷賲賰賳賰 丕賱丌賳 賲卮丕乇賰丞 丕鬲氐丕賱 丕賱廿賳鬲乇賳鬲 賲毓 丕賱兀噩賴夭丞 丕賱兀禺乇賶 賮賷 卮亘賰鬲賰 丕賱賲丨賱賷丞 亘丕爻鬲禺丿丕賲 "
+"廿毓丿丕丿 丕賱卮亘賰丞 丕賱兀賵鬲賵賲丕鬲賷賰賷 (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domain Authentication Required"
+msgid "Remote CUPS server"
+msgstr "禺丕丿賲 CUPS 亘毓賷丿"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "丌禺乇"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "兀賷 丕爻賲 賲爻鬲禺丿賲"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"賷賵噩丿 賲賵丕卅賲 卮亘賰丞 賵丕丨丿 賮賯胤 賲毓丿賾 毓賱賶 賳馗丕賲賰:\n"
+"\n"
+"%s\n"
+"\n"
+"賳丨賳 毓賱賶 賵卮賰 丕毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞 亘丕爻鬲禺丿丕賲 賴匕丕 丕賱賲賵丕卅賲."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "鬲毓匕乇 丕賱丿禺賵賱 亘丕爻鬲禺丿丕賲 丕爻賲 丕賱賲爻鬲禺丿賲 %s (賰賱賲丞 賲乇賵乇 爻賷卅丞責)"
+msgid "Minimal install"
+msgstr "鬲孬亘賷鬲 賲氐睾賾乇"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Ethiopia"
+msgstr "丕孬賷賵亘賷丕"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "賲鬲丨賰賲丕鬲 SMBus"
+msgid "Devanagari"
+msgstr "丿賷賮丕賳睾丕乇賷"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "賲鬲丨賰賲丕鬲 USB"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- 兀噩賴夭丞 pci: 鬲毓胤賷 賲賳賮匕 PCI, 丕賱噩賴丕夭 賵 賵馗賷賮丞 賴匕賴 丕賱亘胤丕賯丞\n"
+"- 兀噩賴夭丞 eide: 丕賱噩賴丕夭 廿賲丕 兀賳 賷賰賵賳 噩賴丕夭 slave 兀賵 master\n"
+"- 兀噩賴夭丞 scsi: scsi bus 賵 賴賵賷丞 噩賴丕夭 scsi"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "賲鬲丨賰賲丕鬲 SCSI"
+msgid "Total size: %d / %d MB"
+msgstr "丕賱丨噩賲 丕賱廿噩賲丕賱賷: %d / %d 賲賷睾丕亘丕賷鬲"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "賲鬲丨賰賲丕鬲 Firewire"
+msgid "disabled"
+msgstr "賲毓胤賱"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "賲鬲丨賰賲丕鬲 (E)IDE/ATA"
+msgid "Search for new scanners"
+msgstr "丕賱亘丨孬 毓賳 賲丕爻丨丕鬲 囟賵卅賷丞 噩丿賷丿丞..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "毓氐丕 丕賱兀賱毓丕亘"
+msgid "Disabling servers..."
+msgstr "噩丕乇賷 鬲毓胤賷賱 丕賱禺賵丕丿賲..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "丕賱賲丕爻丨 丕賱囟賵卅賷"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"賮囟賱丕 丕禺鬲乇 丕賱賮鬲乇丞 \n"
+"賲丕 亘賷賳 賰賱 毓賲賱賷丞 賳爻禺 丕丨鬲賷丕胤賷"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "睾賷乇 賲毓乇賵賮/兀禺乇賶"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "賮卮賱 鬲孬亘賷鬲 %s. 馗賴乇 丕賱禺胤兀 丕賱鬲丕賱賷:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "賲鬲丨賰賲丕鬲 丕賱賳馗丕賲"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "鬲毓匕乇 鬲卮睾賷賱 mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "丕賱賲賵丿賲"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"賱賯丿 丕禺鬲乇鬲 丕賱禺丕丿賲丕鬲 丕賱鬲丕賱賷丞: %s\n"
+"\n"
+"\n"
+"賴匕賴 丕賱禺丕丿賲丕鬲 賲賮毓賾賱丞 丕賮鬲乇丕囟賷丕賸, 賵 賱丕 賷賵噩丿 賱賴賲 賲卮丕賰賱 兀賲賳賷丞\n"
+"賲毓乇賵賮丞, 賵 賱賰賳 賯丿 鬲賰鬲卮賮 亘毓囟 丕賱賲卮丕賰賱 丕賱噩丿賷丿丞. 賮賷 賴匕賴 丕賱丨丕賱丞, 鬲兀賰丿 賲賳 兀賳\n"
+"鬲賯賵賲 亘丕賱鬲乇賯賷丞 賮賷 兀賯乇亘 賵賯鬲 賲賲賰賳.\n"
+"\n"
+"\n"
+"賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 鬲乇賷丿 鬲孬亘賷鬲 賴匕賴 丕賱禺丕丿賲丕鬲 丕賱丌賳責\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "亘胤丕賯丞 丕賷孬乇賳鬲"
+msgid "Network printer (TCP/Socket)"
+msgstr "胤丕亘毓丞 卮亘賰丞 (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "丕賱賲毓丕賱噩丕鬲"
+msgid "Backup User files..."
+msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賲爻鬲禺丿賲賷賳..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "賰丕賲賷乇丕鬲 丕賱賵賷亘"
+msgid "Install system"
+msgstr "鬲孬亘賷鬲 丕賱賳馗丕賲"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "亘胤丕賯丞 丕賱氐賵鬲"
+msgid "First DNS Server (optional)"
+msgstr "禺丕丿賲 DNS 丕賱兀賵賱 (丕禺鬲賷丕乇賷)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "兀噩賴夭 賵爻丕卅胤 賲鬲毓丿丿丞 兀禺乇賶"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "亘丿賱丕賸 賲賳 匕賱賰, 賷賲賰賳賰 鬲丨丿賷丿 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯丕 丕賱廿丿禺丕賱"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "亘胤丕賯丞 丕賱鬲賱賮丕夭"
+msgid "dhcpd Config..."
+msgstr "鬲賴賷卅丞 dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "亘胤丕賯丞 丕賱賮賷丿賷賵"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "鬲賲 毓賲賱 丕賱鬲賳氐賷亘, 賵 賱賰賳賴 睾賷乇 賲賲賰賾賻賳 丕賱丌賳"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "卮乇賷胤 丕賱亘賷丕賳丕鬲"
+msgid "LILO/grub Installation"
+msgstr "鬲孬亘賷鬲 LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "丕賱毓亘乇賷丞"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "兀噩賴夭丞 賳爻禺 CD/DVD"
+msgid "load setting"
+msgstr "丨賲賱 丕賱廿毓丿丕丿丕鬲"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "丕賱賯乇氐 丕賱賲丿賲噩"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "丕賱胤丕亘毓丞 \"%s\" 毓賱賶 丕賱禺丕丿賲 \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "丕賱賯乇氐"
+msgid "Floppy can be removed now"
+msgstr "賷賲賰賳 丕夭丕賱丞 丕賱賯乇氐 丕賱賲乇賳 丕賱丌賳"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "鬲孬亘賷鬲 賲氐睾賾乇"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "丕賱賯乇氐 丕賱賲乇賳"
+msgid "Denmark"
+msgstr "丕賱丿賳賲丕乇賰"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "丕爻賲丨 賱賷 兀賳 兀禺鬲丕乇 賲卮睾賱"
+msgid "Moving partition..."
+msgstr "噩丕乇賷 賳賯賱 丕賱鬲噩夭卅丞..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "丕賱賲卮睾賱:"
+msgid "(This) DHCP Server IP"
+msgstr "毓賳賵丕賳 IP 賱禺丕丿賲 DHCP (賴匕丕)"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"丕匕丕 賰賳鬲 鬲毓鬲賯丿 賮毓賱丕賸 兀賳賰 鬲毓乇賮 賲丕 賴賵 丕賱賲卮睾賱 丕賱氐丨賷丨 賱亘胤丕賯鬲賰\n"
-"賷賲賰賳賰 丕禺鬲賷丕乇賴 賲賳 丕賱賯丕卅賲丞 兀毓賱丕賴.\n"
-"\n"
-"丕賱賲卮睾賱 丕賱丨丕賱賷 賱亘胤丕賯丞 丕賱氐賵鬲 \"%s\" 丕賱禺丕氐丞 亘賰 賴賵 \"%s\" "
+msgid "Test of the configuration"
+msgstr "丕禺鬲亘丕乇 丕賱廿毓丿丕丿"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "噩丕乇賷 丕禺鬲賷丕乇 賲卮睾賱 毓丕賲"
+msgid "Installing %s ..."
+msgstr "噩丕乇賷 鬲孬亘賷鬲 %s ..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "丨賱 賲卮丕賰賱 丕賱氐賵鬲"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "禺胤兀: 賲卮睾賱 \"%s\" 賱亘胤丕賯丞 丕賱氐賵鬲 丕賱禺丕氐丞 亘賰 睾賷乇 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞"
+msgid "Choose your filesystem encryption key"
+msgstr "丕禺鬲乇 賲賮鬲丕丨 鬲卮賮賷乇 賳馗丕賲 丕賱賲賱賮丕鬲"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "賲卮睾賱 睾賷乇 賲毓乇賵賮"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"賮囟賱丕賸 丕禺鬲乇 噩賴丕夭 CD/DVD 丕賱禺丕氐 亘賰\n"
+"(丕囟睾胤 丕丿禺丕賱 賱賳卮乇 丕賱廿毓丿丕丿丕鬲 賱丨賯賵賱 兀禺乇賶.\n"
+"賴匕丕 丕賱丨賯賱 賱賷爻 囟乇賵乇賷丕賸, 丕賳賴 賲噩乇丿 兀丿丕丞 賱賲賱亍 丕賱廿爻鬲賲丕乇丞.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "賱丕 賷賵噩丿 賲卮睾賱 賲毓乇賵賮 賱亘胤丕賯丞 丕賱氐賵鬲 (%s)"
+msgid "Andorra"
+msgstr "兀賳丿賵乇丕"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "賱丕 賷賵噩丿 賲卮睾賱 賲毓乇賵賮"
+msgid "Sierra Leone"
+msgstr "爻賷乇丕賱賷賵賳"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"賱丕 賷賵噩丿 賲卮睾賱 賲賮鬲賵丨 丕賱賲氐丿乇 賱亘胤丕賯丞 丕賱氐賵鬲 (%s), 賱賰賳 賴賳丕賰 賲卮睾賱 鬲噩丕乇賷 賮賷 \"%s\"."
+msgid "Botswana"
+msgstr "亘賵鬲爻賵丕賳丕"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "賱丕 賷賵噩丿 賲卮睾賱 賲賮鬲賵丨 丕賱賲氐丿乇"
+msgid "(default value: %s)"
+msgstr "(丕賱賯賷賲丞 丕賱廿賮鬲乇丕囟賷丞: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "賷乇噩賶 丕賱廿賳鬲馗丕乇... 噩丕乇賷 鬲胤亘賷賯 丕賱廿毓丿丕丿丕鬲"
+msgid "Alternative test page (Letter)"
+msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 亘丿賷賱丞 (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"賲卮睾賱 \"%s\" 丕賱賯丿賷賲 毓賱賶 丕賱賯丕卅賲丞 丕賱爻賵丿丕亍.\n"
+"鬲賴賷卅丞 禺丕丿賲 DHCP.\n"
"\n"
-"賮賷 亘毓囟 丕賱丨丕賱丕鬲 賯賷賱 兀賳賴 賷爻亘亘 丕賳賴賷丕乇 賮賷 丕賱賳賵丕丞 毓賳丿 丕夭丕賱丞 丕賱鬲丨賲賷賱.\n"
+"賴賳丕 賷賲賰賳賰 丕禺鬲賷丕乇 禺賷丕乇丕鬲 賲禺鬲賱賮丞 賱鬲賴賷卅丞 禺丕丿賲 DHCP.\n"
+"丕匕丕 賱賲 鬲賰賳 賳賴賱賲 賲丕匕丕 賷毓賳賷 丕賱禺賷丕乇 賮賰賱 賲丕 毓賱賷賰 賴賵 鬲乇賰賴 賰賲丕 賴賵.\n"
"\n"
-"賲卮睾賱 \"%s\" 丕賱噩丿賷丿 爻賷鬲賲 丕爻鬲禺丿丕賲賴 毓賳丿 鬲卮睾賷賱 丕賱噩賴丕夭 賮賷 丕賱賲乇丞 丕賱賯丕丿賲丞."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "丨賱 丕賱賲卮丕賰賱"
+msgid "Choose an X server"
+msgstr "廿禺鬲乇 禺丕丿賲 X"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+msgid "Swap partition size in MB: "
+msgstr "丨噩賲 鬲噩夭卅丞 丕賱鬲亘丿賷賱 亘丕賱賲賷睾丕亘丕賷鬲"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"\n"
-"\n"
-"亘胤丕賯鬲賰 鬲爻鬲禺丿賲 丕賱賲卮睾賱 %s\"%s\" 丨丕賱賷丕賸 (丕賱賲卮睾賱 丕賱丨丕賱賷 賱亘胤丕賯鬲賰 賴賵 \"%s\")"
+"賲賮丕鬲賷丨 兀禺乇賶\n"
+"(睾賷乇 drakbackup) 賲賵噩賵丿丞 賲爻亘賯丕賸"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr "賷賲賰賳賰 賴賳丕 丕禺鬲賷丕乇 賲卮睾賱 亘丿賷賱 (ALSA 兀賵 OSS) 賱亘胤丕賯丞 丕賱氐賵鬲 (%s)."
+msgid "No changes to backup!"
+msgstr "賱丕 鬲睾賷賷乇丕賳 賱賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞!"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "丕毓丿丕丿丕鬲 丕賱氐賵鬲"
+msgid "Formatted\n"
+msgstr "賲噩賴夭\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr "賱丕 賷賵噩丿 賲卮睾賱 亘丿賷賱 (ALSA 兀賵 OSS) 賱亘胤丕賯丞 丕賱氐賵鬲 (%s) 丕賱鬲賷 鬲爻鬲禺丿賲 \"%s\""
+msgid "Type of install"
+msgstr "賳賵毓 丕賱鬲孬亘賷鬲"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "賱丕 賲卮睾賱 亘丿賷賱"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "丕賱胤丕亘毓丞 \"%s\" 毓賱賶 禺丕丿賲 SMB/Windows \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "鬲賲賰賷賳 丿毓賲 丕賱乇丕丿賷賵"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Daemon (%s) include :\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "丿毓賲 丕賱乇丕丿賷賵:"
+msgid "%d comma separated numbers"
+msgstr "%d 兀乇賯丕賲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "丕毓丿丕丿 PLL:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"亘乇賵鬲賵賰賵賱 rusers 賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 毓賱賶 丕賱卮亘賰丞 兀賳 賷鬲毓乇賮賵丕 毓賱賶 賲賳\n"
+"爻噩賱 丕賱丿禺賵賱 丕賱賶 丕賱兀噩賴夭丞 丕賱賲爻鬲噩賷亘丞 丕賱兀禺乇賶."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "number of capture buffers for mmap'ed capture"
+msgid "Automatic Steps Configuration"
+msgstr "鬲賴賷卅丞 丌賱賷丞 賱賱禺胤賵丕鬲"
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Number of capture buffers:"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"賴賱 鬲乇賷丿 賲毓乇賮丞 丕賱賲夭賷丿 毓賳 賲噩鬲賲毓 丕賱賲氐丕丿乇 丕賱賲賮鬲賵丨丞責 賰賳 噩夭亍丕賸 賲賳 毓丕賱賲 丕賱亘乇賲噩賷丕鬲 "
+"丕賱丨乇丞"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "賳賵毓 丕賱鬲賵賳乇:"
+msgid "Barbados"
+msgstr "亘丕乇亘丕丿賵爻"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card model:"
-msgstr "賳賵毓 丕賱亘胤丕賯丞"
+msgid "Please select data to backup..."
+msgstr "乇噩丕亍 丕禺鬲乇 丕賱亘賷丕賳丕鬲 丕賱賲胤賱賵亘 賳爻禺賴丕 丕丨鬲賷丕胤賷丕..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"賱兀睾賱亘 亘胤丕賯丕鬲 丕賱鬲賱賮丕夭 丕賱丨丿賷孬丞, 賵丨丿丞 bttv 賱賳賵丕丞 賱賷賳賰爻 賷賲賰賳賴丕 丕賱鬲丨賯賯 丌賱賷丕賸 賲賳 "
-"丕賱賲毓丕賲賱丕鬲 丕賱氐丨賷丨丞.\n"
-"丕匕丕 鬲賲 丕賱鬲毓乇賮 毓賱賶 丕賱亘胤丕賯丞 亘卮賰賱 禺丕胤卅, 賷賲賰賳賰 丕丿禺丕賱 丕賱鬲賵賳乇 賵 賳賵毓 丕賱亘胤丕賯丞 丕賱氐丨賷丨 "
-"賴賳丕. 賮賯胤 丕禺鬲乇 丕賱賲毓丕賲賱丕鬲 丕賱賲賳丕爻亘丞 賱亘胤丕賯丞 丕賱卮丕卮丞."
+"賮卮賱 丕賱廿鬲氐丕賱.\n"
+"鬲兀賰丿 賲賳 丕賱賵氐賱丞 賮賷 賲乇賰夭 鬲丨賰賲 Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "睾賷乇 賲毓乇賵賮|毓丕賲"
+msgid "received"
+msgstr "賲購爻鬲賯亘賱丞"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "睾賷乇 賲毓乇賵賮|CPH06X (bt878) [賲氐賳毓賵賳 賰孬賷乇賵賳]"
+msgid "/File/_New"
+msgstr "/賲賱賮/_噩丿賷丿"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "睾賷乇 賲毓乇賵賮|CPH05X (bt878) [賲氐賳毓賵賳 賰孬賷乇賵賳]"
+msgid "The DNS Server IP"
+msgstr "毓賳賵丕賳 IP 賱禺丕丿賲 DNS"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect"
-msgstr "鬲丨賯賯 丌賱賷"
+msgid "IP Range End:"
+msgstr "IP Range End:"
-#: ../../interactive/newt.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Do"
-msgstr "丕賮毓賱"
+msgid "High"
+msgstr "賲乇鬲賮毓"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "丕禺鬲賷丕乇賰 ? (default %s) "
+msgid "NoVideo"
+msgstr "賱丕 賮賷丿賷賵"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "丕禺鬲賷丕乇 爻賷卅, 丨丕賵賱 賲乇丞 兀禺乇賶\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "賴匕丕 丕賱丨賯賱 賷氐賮 丕賱噩賴丕夭"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "廿毓丕丿丞 鬲爻賱賷賲"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "噩丕乇賷 丕囟丕賮丞 丕賱胤丕亘毓丞 丕賱賶 Star Office/OpenOffice.org/GIMP"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notice, a label changed:\n"
-"%s"
+msgid "Local Printers"
+msgstr "丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "Installation image directory"
+msgstr "丿賱賷賱 氐賵乇丞 丕賱鬲孬亘賷鬲"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> There are many things to choose from (%s).\n"
+msgid "NIS Server"
+msgstr "禺丕丿賲 NIS"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Your choice? (default `%s'%s) "
+msgid "Port: %s"
+msgstr "丕賱賲賳賮匕: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " enter `void' for void entry"
+msgid "Spain"
+msgstr "兀爻亘丕賳賷丕"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Do you want to click on this button?"
+msgid "This user name has already been added"
+msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 賲購囟丕賮 賲爻亘賯丕"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Button `%s': %s"
+msgid "Choose a file"
+msgstr "廿禺鬲乇 賲賱賮"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Your choice? (0/1, default `%s') "
+msgid "Apply"
+msgstr "鬲胤亘賷賯"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "Auto-detect available ports"
+msgstr "鬲丨賯賯 丌賱賷丕賸 賲賳 丕賱賲賳丕賮匕 丕賱賲鬲賵賮乇丞"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"賮卮賱 鬲丨賲賷賱 丕賱賵丨丿丞 %s.\n"
-"賴賱 鬲乇賷丿 丕賱賲丨丕賵賱丞 孬丕賳賷丞 亘賲毓丕賲賱丕鬲 兀禺乇賶責"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "丨丿丿 丕賱禺賷丕乇丕鬲"
+msgid "San Marino"
+msgstr "爻丕賳 賲丕乇賷賳賵"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "鬲丨賯賯 丌賱賷"
+msgid "Belgium"
+msgstr "亘賱噩賷賰丕"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"賮賷 亘毓囟 丕賱兀丨賷丕賳 賷丨鬲丕噩 賲卮睾賱 %s 賲毓賱賵賲丕鬲 丕囟丕賮賷丞 賱賰賷 賷毓賲賱\n"
-"亘卮賰賱 氐丨賷丨, 丕賱丕 兀賳賴 賷賲賰賳賴 丕賱毓賲賱 噩賷丿丕 亘丿賵賳賴丕. 賴賱 鬲乇賷丿 鬲丨丿賷丿\n"
-"禺賷丕乇丕鬲 丕囟丕賮賷丞 賱賴 兀賵 鬲爻賲丨 賱賱賲卮睾賱 亘丕賱鬲丨賯賯 賮賷 噩賴丕夭賰\n"
-"毓賳 丕賱賲毓賱賵賲丕鬲 丕賱鬲賷 爻賷丨鬲丕噩賴丕責 賮賷 亘毓囟 丕賱兀丨賷丕賳, 賯丿 賷鬲爻亘亘 丕賱鬲丨賯賯 賮賷 鬲毓賱賷賯 丕賱噩賴丕夭, "
-"賱賰賳\n"
-"賱丕 賷噩亘 兀賳 賷鬲爻亘亘 匕賱賰 賮賷 兀賷 賲卮丕賰賱."
+msgid "Kuwait"
+msgstr "丕賱賰賵賷鬲"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "兀賷 賲卮睾賱 %s 賷噩亘 兀賳 丕爻鬲禺丿賲賴責"
+msgid "Choose the window manager to run:"
+msgstr "丕禺鬲乇 賲丿賷乇 丕賱賳賵丕賮匕 丕賱匕賷 爻賷鬲賲 鬲卮睾賷賱賴:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "禺賷丕乇丕鬲 丕賱賵丨丿丞:"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "丕賱噩賷賱 丕賱孬丕賳賵賷 賱賱賲毓丕賱噩"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"賷賲賰賳賰 丕賱丌賳 丕毓胤丕亍 丕賱禺賷丕乇丕鬲 賱賱賵丨丿丞 %s.\n"
-"丕賱禺賷丕乇丕鬲 賮賷 賴賷卅丞 ``name=value name2=value2 ...'' \n"
-"賲孬賱丕, ``io=0x300 irq=7''"
+msgid "First Time Wizard"
+msgstr "賲毓丕賱噩 First Time"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"賷賲賰賳賰 丕賱丌賳 丕毓胤丕亍 丕賱禺賷丕乇丕鬲 賱賱賵丨丿丞 %s.\n"
-"賱丕丨馗 兀賳 兀賷 毓賳賵丕賳 賷噩亘 丕丿禺丕賱賴 賲爻亘賵賯丕賸 亘賭 0x 賲孬賱 '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(丕賱賵丨丿丞 %s)"
+"馗賴乇 禺胤兀 賵 賱丕 兀毓乇賮 賰賷賮 兀鬲毓丕賲賱 賲毓賴 亘兀爻賱賵亘 噩賷丿.\n"
+"鬲丕亘毓 毓賱賶 賲爻丐賵賱賷鬲賰."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "噩丕乇賷 鬲孬亘賷鬲 賲卮睾賱 %s 賱賱亘胤丕賯丞 %s"
+msgid "please wait, parsing file: %s"
+msgstr "賷乇噩賶 丕賱廿賳鬲馗丕乇, 噩丕乇賷 鬲丨賱賷賱 丕賱賲賱賮: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "毓乇囟 賲毓賱賵賲丕鬲 丕賱毓鬲丕丿"
+msgid "Taiwan"
+msgstr "鬲丕賷賵丕賳"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "賴賱 賱丿賷賰 兀賷 賵丕噩賴丕鬲 %s責"
+msgid "Pakistan"
+msgstr "亘丕賰爻鬲丕賳"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "賴賱 毓賳丿賰 賵丕丨丿丞 兀禺乇賶責"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "鬲賲 丕賷噩丕丿 %s %s 賵丕噩賴丕鬲"
+msgid "Permissions"
+msgstr "丕賱鬲氐丕乇賷丨"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "賷賲賰賳賰 鬲賴賷卅丞 賰賱 賲毓丕賲賱 賱賱賵丨丿丞 賴賳丕."
+msgid "Provider name (ex provider.net)"
+msgstr "丕爻賲 丕賱賲賵賮乇 (賲孬賱丕賸 provider.net)"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "丨乇賮賷丕鬲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
+msgid "Version: %s\n"
+msgstr "丕賱廿氐丿丕乇: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "兀乇賯丕賲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"丕賱賳馗丕賲 賱丿賷賰 賯賱賷賱 丕賱賲賵丕乇丿. 賯丿 鬲賯丕亘賱 亘毓囟 丕賱賲卮丕賰賱 賯賷 鬲孬亘賷鬲\n"
+"Mandrake Linux. 丕匕丕 丨丿孬 匕賱賰, 賷賲賰賳賰 丕賱鬲孬亘賷鬲 賮賷 賵囟毓 賳氐賷, 賱賴匕丕 丕賱睾乇囟,\n"
+"丕囟睾胤 `F1' 毓賳丿 丕賱廿賯賱丕毓 賲賳 丕賱賯乇氐 丕賱賲丿賲噩, 賵 丕賰鬲亘 `text'."
-#: ../../modules/parameters.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d 丨乇賮賷丕鬲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
+msgid "Use the Windows partition for loopback"
+msgstr "丕爻鬲禺丿賲 鬲噩夭卅丞 Windows 賰賭 loopback"
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d 兀乇賯丕賲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
+msgid "Armenian (typewriter)"
+msgstr "丕賱兀乇賲賷賳賷丞 (丌賱丞 賰丕鬲亘丞)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "a number"
-msgstr "乇賯賲"
+msgid "Connection type: "
+msgstr "賳賵毓 丕賱毓賱丕賯丞"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"鬲丨鬲丕噩 丕賱賶 alcatel microcode.\n"
-"賯賲 亘鬲賳夭賷賱賴丕 毓賱賶\n"
-"http://www.speedtouchdsl.com/dvreg_lx.htm\n"
-"賵 丕賳爻禺 丕賱賲賱賮 mgmt.o 丕賱賶 /usr/share/speedtouch"
+msgid "Graphical interface"
+msgstr "丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"丕賱胤乇賷賯丞 丕賱兀賰孬乇 卮賷賵毓丕賸 賱賱廿鬲氐丕賱 亘賭 adsl 賴賷 pppoe.\n"
-"亘毓囟 丕賱廿鬲氐丕賱丕鬲 鬲爻鬲禺丿賲 pptp, 賵 丕賱賯賱賷賱 鬲爻鬲禺丿賲 dhcp.\n"
-"丕匕丕 賱賲 鬲賰賳 鬲毓賱賲, 丕禺鬲乇 '丕爻鬲禺丿賲 pppoe'"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s 賲毓 鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "賵氐賾賱 廿賱賶 丕賱廿賳鬲乇賳鬲 "
+msgid "India"
+msgstr "丕賱賴賳丿"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (using pppoa) usb"
+msgid "Chad"
+msgstr "鬲卮丕丿"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Slovakia"
+msgstr "爻賱賵賮丕賰賷丕"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "丕爻鬲禺丿賲 dhcp"
+msgid "Singapore"
+msgstr "爻賳睾丕賮賵乇丞"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "丕爻鬲禺丿賲 pptp"
+msgid "Cambodia"
+msgstr "賰賲亘賵丿賷丕"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "丕爻鬲禺丿賲 pppoe"
+msgid "Monitor HorizSync: %s\n"
+msgstr "鬲夭丕賲賳 丕賱卮丕卮丞 丕賱兀賮賯賷: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Other ports"
-msgstr "賲賳丕賮匕 兀禺乇賶"
+msgid "Path"
+msgstr "丕賱賲爻丕乇"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "賰賱 卮卅 (賱丕 噩丿丕乇 賳丕乇賷)"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
+"賴賳丕 賷賲賰賳賰 鬲丨丿賷丿 兀賷 兀賲乇 賴賱丕賲賷 賷賲賰賳 鬲丨賵賷賱 賵馗賷賮丞 丕賱胤亘丕毓丞 丕賱賷賴 亘丿賱丕賸 賲賳 丕乇爻丕賱賴丕 "
+"賲亘丕卮乇丞賸 丕賱賶 丕賱胤丕亘毓丞."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"鬲賲 丕毓胤丕亍 賲賳賮匕 睾賷乇 氐丕賱丨: %s.\n"
-"丕賱賳爻賯 丕賱氐丨賷丨 賴賵 \"port/tcp\" 兀賵 \"port/udp\", \n"
-"賮賷 丨賷賳 賷賰賵賳 丕賱賲賳賮匕 (port) 亘賷賳 1 賵 65535."
+"賳馗丕賲 丕賱胤亘丕毓丞 (%s) 賱賳 賷鬲賲 亘丿丐賴 亘卮賰賱 丌賱賷 毓賳丿 亘丿亍 鬲卮睾賷賱 丕賱賲丕賰賷賳丞.\n"
+"\n"
+"賲賳 丕賱賲賲賰賳 兀賳 賷賰賵賳 賯丿 鬲賲 鬲毓胤賷賱 丕賱亘丿亍 丕賱丌賱賷 亘爻亘亘 丕賱鬲睾賷賷乇 丕賱賶 賲爻鬲賵賶 兀毓賱賶 賱兀賳 "
+"賳馗丕賲 丕賱胤亘丕毓丞 賯丿 賷賰賵賳 賳賯胤丞 賲亘丿卅賷丞 賱賴噩賲丕鬲 丕賱賲禺鬲乇賯賷賳.\n"
+"\n"
+"賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱亘丿亍 丕賱丌賱賷 賱賳馗丕賲 丕賱胤亘丕毓丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱 賲乇丞 兀禺乇賶責"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"賷賲賰賳賰 丕丿禺丕賱 賲賳丕賮匕 賲鬲賳賵毓丞. \n"
-"兀賲孬賱丞 氐丕賱丨丞 賴賷: 139/tcp 139/udp.\n"
-"丕賱賯 賳馗乇丞 毓賱賶 /etc/services 賱賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲."
+"丕賱胤丕亘毓丞 %s\n"
+"賴賱 鬲乇賷丿 鬲毓丿賷賱 鬲賱賰 丕賱胤丕亘毓丞責"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "兀賷 禺丿賲丞 鬲乇賷丿 丕賱爻賲丕丨 賱賱廿賳鬲乇賳鬲 兀賳 鬲鬲氐賱 亘賴丕責"
+msgid "Add host"
+msgstr "丕囟賮 賲爻鬲囟賷賮"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"兀丿丕丞 鬲賴賷卅丞 DrakFirewall\n"
+"丕匕丕 賰賳鬲 鬲毓鬲賯丿 賮毓賱丕賸 兀賳賰 鬲毓乇賮 賲丕 賴賵 丕賱賲卮睾賱 丕賱氐丨賷丨 賱亘胤丕賯鬲賰\n"
+"賷賲賰賳賰 丕禺鬲賷丕乇賴 賲賳 丕賱賯丕卅賲丞 兀毓賱丕賴.\n"
"\n"
-"鬲兀賰丿 賲賳 兀賳賰 賯賲鬲 亘鬲賴賷卅丞 丕鬲氐丕賱賰 亘丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 亘丕爻鬲禺丿丕賲\n"
-"drakconnect 賯亘賱 丕賱賲鬲丕亘毓丞."
+"丕賱賲卮睾賱 丕賱丨丕賱賷 賱亘胤丕賯丞 丕賱氐賵鬲 \"%s\" 丕賱禺丕氐丞 亘賰 賴賵 \"%s\" "
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"兀丿丕丞 鬲賴賷卅丞 drakfirewall\n"
+"賴賱 鬲乇賷丿 丕賱爻賲丕丨 賱賱賲爻鬲禺丿賲賷賳 亘賲卮丕乇賰丞 亘毓囟 丕賱兀丿賱丞 丕賱禺丕氐丞 亘賴賲責\n"
+"丕賱爻賲丕丨 亘匕賱賰 爻賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 亘兀賳 賷賳賯乇賵丕 夭乇 丕賱賲卮丕乇賰丞 賮賷 賰賵賳賰賷賵乇乇 賵 賳賵鬲賷賱賵爻.\n"
"\n"
-"賴匕賴 丕賱兀丿丕丞 鬲爻賲丨 賱賰 亘鬲賴賷卅丞 噩丿丕乇 賳丕乇賷 卮禺氐賷 賱賳馗丕賲 Mandrake Linux 賴匕丕.\n"
-"廿匕丕 賰賳鬲 鬲乇賷丿 噩丿丕乇丕 賳丕乇賷丕 賲鬲禺氐氐丕, 丕賱賯 賳馗乇丞 毓賱賶\n"
-"鬲賵夭賷毓丞 MandrakeSecurity Firewall."
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "No network card"
-msgstr "賱丕 鬲賵噩丿 亘胤丕賯丞 卮亘賰丞"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "禺丕丿賲 POP 賵 IMAP"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "禺丕丿賲 亘乇賷丿"
+"\"賲禺氐氐\" 賷爻賲丨 賱賰 亘毓賲賱 丕毓丿丕丿丕鬲 禺丕氐 賱賰賱 賲爻鬲禺丿賲.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "禺丕丿賲 丕爻賲 丕賱賳胤丕賯"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"賮囟賱丕購 丕禺鬲乇 丨賮馗 兀賵 鬲丨賲賷賱 丕禺鬲賷丕乇丕鬲賰 賱賱丨夭賲 賲賳 丕賱賯乇氐 丕賱賲乇賳.\n"
+"丕賱賳爻賯 賲卮丕亘賴 賱兀賯乇丕氐 丕賱鬲孬亘賷鬲 丕賱丌賱賷 丕賱賲乇賳丞."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Web Server"
-msgstr "禺丕丿賲 丕賱賵賷亘"
+msgid "China (broadcast)"
+msgstr "丕賱氐賷賳 (broadcast)"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "賷噩亘 兀賳 賷丨鬲賵賷 丕爻賲 賲爻鬲囟賷賮 Zeroconf 毓賱賶 ."
+msgid "Use quota for backup files."
+msgstr "丕爻鬲禺丿賲 quota 賱賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host name"
-msgstr "丕爻賲 丕賱賲爻鬲囟賷賮"
+msgid "Configuring printer \"%s\"..."
+msgstr "噩丕乇賷 廿毓丿丕丿 丕賱胤丕亘毓丞 \"%s\" ..."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "丕爻賲 賲爻鬲囟賷賮 Zeroconf"
+msgid "Internet connection"
+msgstr "賵氐賱丞 丕賳鬲乇賳鬲"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"\n"
-"\n"
-"兀丿禺賱 丕爻賲 賲爻鬲囟賷賮 Zeroconf 亘丿賵賳 兀賷 賳賯丕胤 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿\n"
-"丕爻鬲禺丿丕賲 丕爻賲 丕賱賲爻鬲囟賷賮 丕賱廿賮鬲乇丕囟賷."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "噩丕乇賷 丕毓丿丕丿 丕賱卮亘賰丞"
-
-#: ../../network/ethernet.pm:1
-#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "賮囟賱丕賸 丕禺鬲乇 賲賵丕卅賲 丕賱廿賳鬲乇賳鬲 丕賱匕賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲."
+"賮卮賱 鬲丨賲賷賱 丕賱賵丨丿丞 %s.\n"
+"賴賱 鬲乇賷丿 丕賱賲丨丕賵賱丞 孬丕賳賷丞 亘賲毓丕賲賱丕鬲 兀禺乇賶責"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Choose the network interface"
-msgstr "丕禺鬲乇 賵丕噩賴丞 丕賱卮亘賰丞"
+msgid "Welcome to the Open Source world."
+msgstr "兀賴賱丕賸 亘賰 賮賷 毓丕賱賲 丕賱賲氐丕丿乇 丕賱賲賮鬲賵丨丞"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"賱賲 賷鬲賲 丕賰鬲卮丕賮 兀賷 賲賵丕卅賲 卮亘賰丞 丕賷孬乇賳鬲 毓賱賶 賳馗丕賲賰.\n"
-"賱丕 賷賲賰賳賳賷 丕毓丿丕丿 賳賵毓 丕賱廿鬲氐丕賱 賴匕丕."
+msgid "Bosnia and Herzegovina"
+msgstr "丕賱亘賵爻賳丞 賵 丕賱賴乇爻賰"
-#: ../../network/ethernet.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"兀賷 毓賲賷賱 DHCP 鬲乇賷丿 兀賳 鬲爻鬲禺丿賲責\n"
-"丕賱廿賮鬲乇丕囟賷 賴賵 dhcp-client."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丕鬲 ISDN PCI. 賮囟賱丕賸 丕禺鬲乇 賵丕丨丿丞 賮賷 丕賱卮丕卮丞 丕賱鬲丕賱賷丞."
+"鬲丨鬲丕噩 丕賱賶 賳馗丕賲 賲賱賮丕鬲 丨賯賷賯賷 (ext2/ext3, resierfs, xfs, 兀賵 jfs) 賱賳賯胤丞 丕賱鬲丨賲賷賱 "
+"賴匕賴\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞 ISDN PCI, 賱賰賳 賱賲 賷鬲賲 丕賱鬲毓乇賮 毓賱賶 賳賵毓賴丕. 賮囟賱丕賸 丕禺鬲乇 亘胤丕賯丞 PCI "
-"賮賷 丕賱卮丕卮丞 丕賱鬲丕賱賷丞."
+msgid "You must enter a host name or an IP address.\n"
+msgstr "賮囟賱丕 兀丿禺賱 丕爻賲 丕賱賲爻鬲囟賷賮 兀賵 毓賳賵丕賳 IP.\n"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "兀賷 賲賳 丕賱丌鬲賷 賴賷 亘胤丕賯丞 ISDN 丕賱禺丕氐丞 亘賰責"
+msgid "Netherlands"
+msgstr "賴賵賱賳丿丕"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "鬲賴賷卅丞 ISDN"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "噩丕乇賷 丕乇爻丕賱 丕賱賲賱賮丕鬲..."
#: ../../network/isdn.pm:1
#, c-format
-msgid "Abort"
-msgstr "廿賳賴丕亍"
+msgid "Internal ISDN card"
+msgstr "亘胤丕賯丞 ISDN 丿丕禺賱賷丞"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Continue"
-msgstr "鬲丕亘毓"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr "賱丕 賷賵噩丿 賲卮睾賱 亘丿賷賱 (ALSA 兀賵 OSS) 賱亘胤丕賯丞 丕賱氐賵鬲 (%s) 丕賱鬲賷 鬲爻鬲禺丿賲 \"%s\""
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 ISA, 賮廿賳 丕賱賯賷賲 丕賱鬲賷 爻鬲毓乇囟 毓賱賶 丕賱卮丕卮丞 丕賱鬲丕賱賷丞 賷噩亘 兀賳 鬲賰賵賳 "
-"氐丨賷丨丞.\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 PCMCIA, 賷噩亘 毓賱賷賰 兀賳 鬲毓乇賮 賯賷賲 \"irq\" 賵 \"io\" 丕賱禺丕氐丞 "
-"亘亘胤丕賯鬲賰.\n"
+msgid "Title"
+msgstr "丕賱毓賳賵丕賳"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "I don't know"
-msgstr "賱丕 兀毓乇賮 "
+msgid "Install & convert Fonts"
+msgstr "孬亘賾鬲 賵 丨賵賾賱 丕賱禺胤賵胤"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "WARNING"
+msgstr "WARNING"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Installing bootloader"
+msgstr "噩丕乇賷 鬲孬亘賷賳 賲丨賲賾賱 丕賱廿賯賱丕毓"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "賲丕 賴賵 賳賵毓 丕賱亘胤丕賯丞 賱丿賷賰責"
+msgid "replay"
+msgstr "丕毓丕丿丞"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "鬲賲 丕賷噩丕丿 丕賱賵丕噩賴丞 \"%s\" 賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕責"
+msgid "detected %s"
+msgstr "鬲賲 丕賰鬲爻丕賮 %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "賲丕 賴賵 丕賱亘乇賵鬲賵賰賵賱 丕賱匕賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴責"
+msgid "Virgin Islands (U.S.)"
+msgstr "丕賱噩夭乇 丕賱毓匕乇丕亍 (丕賱賵賱丕賷丕鬲 丕賱賲鬲丨丿丞)"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "亘乇賵鬲賵賰賵賱 賱亘賯賷丞 丕賱毓丕賱賲"
+msgid "Bad backup file"
+msgstr "賲賱賮 賳爻禺 丕丨鬲賷丕胤賷 爻賷卅"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"亘乇賵鬲賵賰賵賱 賱亘賯賷丞 丕賱毓丕賱賲\n"
-"賱丕 D-Channel (禺胤賵胤 賲丐噩乇丞)"
+"鬲賲 鬲賳氐賷亘 賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賲爻亘賯丕賸.\n"
+"賵 賴賷 賲毓胤賱丞 丨丕賱賷丕賸.\n"
+"\n"
+"賲丕匕丕 鬲乇賷丿 兀賳 鬲賮毓賱責"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "European protocol"
-msgstr "丕賱亘乇賵鬲賵賰賵賱 丕賱兀賵乇賵亘賷"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "兀丿禺賱 毓賳賵丕賳 IP 賵 賲賳賮匕 丕賱賲爻鬲囟賷賮 丕賱匕賷 鬲乇賷丿 丕爻鬲禺丿丕賲 胤丕亘毓丕鬲賴."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "丕賱亘乇賵鬲賵賰賵賱 丕賱兀賵乇賵亘賷 (EDSS1)"
+msgid "Pipe into command"
+msgstr "丨賵賱 丕賱賶 丕賱兀賲乇"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"丕禺鬲乇 賲賵賮乇 丕賱禺丿賲丞 丕賱禺丕氐 亘賰.\n"
-"丕賳 賱賲 賷賰賳 賲賵噩賵丿丕賸 賮賷 丕賱賯丕卅賲丞, 丕禺鬲乇 睾賷乇 賲賵噩賵丿."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "賲賵丿賲 ISDN 禺丕乇噩賷"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "亘胤丕賯丞 ISDN 丿丕禺賱賷丞"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "賲丕 賴賵 賳賵毓 賵氐賱丞 ISDN 賱丿賷賰責"
+"亘毓囟 丕賱毓鬲丕丿 丕賱賲賵噩賵丿 毓賱賶 噩賴丕夭賰 賷丨鬲丕噩 丕賱賶 賲卮睾賱丕鬲 ``鬲噩丕乇賷丞'' 賰賷 鬲毓賲賱.\n"
+"賷賲賰賳賰 丕賷噩丕丿 賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲 毓賳賴丕 賮賷: %s"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "賲毓丕賱噩 廿毓丿丕丿 丕賱卮亘賰丞"
+msgid "Detecting devices..."
+msgstr "噩丕乇賷 丕賱鬲丨賯賯 賲賳 丕賱兀噩賴夭丞..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "廿毓丿丕丿 賯丿賷賲 (isdn4net)"
+msgid "Click here to launch the wizard ->"
+msgstr "丕賳賯乇 賴賳丕 賱鬲卮睾賷賱 丕賱賲毓丕賱噩 ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "廿毓丿丕丿 噩丿賷丿 (isdn-light)"
+msgid "Haiti"
+msgstr "賴丕賷鬲賷"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"Description of the fields:\n"
"\n"
-"We recommand the light configuration.\n"
msgstr ""
-"賲丕 賴賷 鬲賴賷卅丞 ISDN 丕賱鬲賷 鬲賮囟賱賴丕責\n"
-"\n"
-"* 丕賱鬲賴賷卅丞 丕賱賯丿賷賲丞 鬲爻鬲禺丿賲 isdn4net. 賵 賴賷 鬲丨鬲賵賷 毓賱賶 兀丿賵丕鬲\n"
-" 賯賵賷丞 賵 賱賰賳賴丕 氐毓亘丞 丕賱鬲賴賷卅丞, 賵 睾賷乇 賯賷丕爻賷丞.\n"
-"\n"
-"* 丕賱鬲賴賷卅丞 丕賱噩丿賷丿丞 兀爻賴賱 賮賷 丕賱賮賴賲, 賵 兀賰孬乇\n"
-" 賯賷丕爻賷丞, 賵 賱賰賳 賲毓 兀丿賵丕鬲 兀賯賱.\n"
+"賵氐賮 丕賱丨賯賵賱:\n"
"\n"
-"賳丨賳 賳賮囟賾賱 賱賰 丕賱鬲賴賷卅丞 丕賱禺賮賷賮丞.\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do nothing"
-msgstr "賱丕 鬲賮毓賱 卮賷卅丕賸"
+msgid "the name of the CPU"
+msgstr "丕爻賲 丕賱賲毓丕賱噩"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "孬亘鬲 rpm"
+msgid "Refreshing printer data..."
+msgstr "噩丕乇賷 丕毓丕丿丞 鬲丨賲賷賱 亘賷丕賳丕鬲 丕賱胤丕亘丞..."
-#: ../../network/modem.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr "鬲賲 丕賷噩丕丿 丕賱賵賷賳賲賵丿賲 \"%s\", 賴賱 鬲乇賷丿 鬲孬亘賷鬲 丕賱亘乇丕賲噩 丕賱賲胤賱賵亘丞 責"
+msgid "You must also format %s"
+msgstr "毓賱賷賰 兀賷囟丕 鬲噩賴賷夭 %s"
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Title"
-msgstr "丕賱毓賳賵丕賳"
+msgid "Be careful: this operation is dangerous."
+msgstr "賰賳 丨匕乇丕: 賴匕賴 丕賱毓賲賱賷丞 禺胤賷乇丞"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"丕賱賲賵丿賲 賱丿賷賰 睾賷乇 賲丿毓賵賲 賲賳 丕賱賳馗丕賲.\n"
-"丕賱賯 賳馗乇丞 毓賱賶 http://www.linmodems.org"
+msgid "Insert a floppy containing package selection"
+msgstr "兀丿禺賴賱 丕賱賯乇氐 丕賱賲乇賳 丕賱賲丨鬲賵賶 毓賱賶 丕禺鬲賷丕乇丕鬲 丕賱丨夭賲"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "禺丕丿賲 DNS 丕賱孬丕賳賷 (丕禺鬲賷丕乇賷)"
+msgid "Server: "
+msgstr "丕賱禺丕丿賲: "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "禺丕丿賲 DNS 丕賱兀賵賱 (丕禺鬲賷丕乇賷)"
+msgid "Security Alerts:"
+msgstr "鬲賳亘賷賴丕鬲 兀賲賳賷丞:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Domain name"
-msgstr "丕爻賲 丕賱賳胤丕賯"
+msgid "Sweden"
+msgstr "丕賱爻賵賷丿"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Use Expect for SSH"
+msgstr "丕爻鬲禺丿賲 Expect 賱賭SSH"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Script-based"
+msgid "Poland"
+msgstr "亘賵賱賳丿丕"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-based"
+msgid "Importance: %s\n"
+msgstr "丕賱兀賴賲賷丞: %s\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+# c-format
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 丕禺乇丕噩 丕賱卮乇賷胤 亘毓丿 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Login ID"
-msgstr "丕爻賲 丕賱丿禺賵賱"
+msgid "Other ports"
+msgstr "賲賳丕賮匕 兀禺乇賶"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Phone number"
-msgstr "乇賯賲 丕賱鬲賾賱賷賮賵賳 "
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "number of capture buffers for mmap'ed capture"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Connection name"
-msgstr "丕爻賲 丕賱廿鬲氐丕賱"
+msgid "SMBus controllers"
+msgstr "賲鬲丨賰賲丕鬲 SMBus"
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dialup options"
-msgstr "禺賷丕乇丕鬲 丕賱廿鬲氐丕賱"
+msgid "Connection timeout (in sec)"
+msgstr "丕賱賵賯鬲 丕賱兀賯氐賶 賱賱丕鬲氐丕賱 (亘丕賱孬賵丕賳賷)"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱賲賳賮匕 丕賱鬲爻賱爻賱賷 丕賱賲乇鬲亘胤 亘賴 丕賱賲賵丿賲 賱丿賷賰."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "丕毓丿丕丿丕鬲 丕賱卮亘賰丞"
+msgid "Croatian"
+msgstr "丕賱賰乇賵丕鬲賷丞"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "丕爻鬲禺丿賲 丕賱鬲噩夭卅丕鬲 丕賱賲賵噩賵丿丞"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"馗賴乇鬲 賲卮丕賰賱 兀孬賳丕亍 丕賱鬲孬亘賷鬲.\n"
-"丕禺鬲亘乇 丕賱賵氐賱丞 亘丕爻鬲禺丿丕賲 net_monitor 兀賵 mcc. 丕匕丕 賱賲 鬲毓賲賱 丕賱賵氐賱丞, 賮賯丿 鬲乇賷丿 丕毓丕丿丞 "
-"丕賱鬲賴賷卅丞."
+msgid "Unable to contact mirror %s"
+msgstr "鬲毓匕乇 丕?鬲氐丕賱 亘丕賱賲乇丌丞 %s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"亘毓丿 毓賲賱 匕賱賰, 賳賳氐丨 亘廿毓丕丿丞 鬲卮睾賷賱 亘賷卅丞 X 賱丿賷賰 賱鬲賮丕丿賷 兀賷 賲卮丕賰賱 鬲鬲毓賱賯 亘廿爻賲 "
-"丕賱賲爻鬲囟賷賮."
+msgid "/Help/_About..."
+msgstr "/賲爻丕毓丿丞/_丨賵賱 丕賱亘乇賳丕賲噩..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"鬲賴丕賳賷賳丕, 丕賳鬲賴鬲 鬲賴賷卅丞 丕賱卮亘賰丞 賵 丕賱廿賳鬲乇賳鬲.\n"
-"爻賷鬲賲 鬲胤亘賷賯 丕賱鬲賴賷卅丞 毓賱賶 賳馗丕賲賰 丕賱丌賳.\n"
-"\n"
+msgid "Remove user directories before restore."
+msgstr "丕丨匕賮 兀丿賱丞 丕賱賲爻鬲禺丿賲賷賳 賯亘賱 丕賱廿爻鬲毓丕丿丞"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"馗賴乇鬲 賲卮賰賱丞 兀孬賳丕亍 丕毓丕丿丞 鬲卮睾賷賱 丕賱卮亘賰丞: \n"
-"\n"
-"%s"
+"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 胤丕亘毓丞 亘毓賷丿丞. 賴匕丕 賷丨鬲丕噩 丕賱賶 兀賳 鬲賰賵賳 賵氐賱丞 丕賱卮亘賰丞 鬲毓賲賱 賵 賱賰賳 "
+"丕賱卮亘賰丞 賱賲 賷鬲賲 丕毓丿丕丿賴丕 丨鬲賶 丕賱丌賳. 丕匕丕 賰賳鬲 鬲乇賷丿 丕賱賲鬲丕亘毓丞 丿賵賳 鬲賴賷卅丞 丕賱卮亘賰丞, "
+"爻鬲賰賵賳 賯丕丿乇丕賸 毓賱賶 丕爻鬲禺丿丕賲 丕賱胤丕亘毓丞 丕賱鬲賷 鬲賯丞賲 亘鬲賴賷卅鬲賴丕 丕賱丌賳. 賰賷賮 鬲乇賷丿 丕賱賲鬲丕亘毓丞責"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "賷噩亘 丕毓丕丿丞 鬲卮睾賷賱 丕賱卮亘賰丞. 賴賱 鬲乇賷丿 丕毓丕丿丞 鬲卮睾賷賱賴丕 責"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "廿毓丿丕丿丕鬲 賲卮丕乇賰丞 胤丕亘毓丕鬲 CUPS"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration"
-msgstr "丕毓丿丕丿丕鬲 丕賱卮亘賰丞"
+msgid "could not find any font in your mounted partitions"
+msgstr "賱賲 兀鬲賲賰賳 賲賳 丕賷噩丕丿 兀賷 禺胤賵胤 賮賷 鬲噩夭卅丕鬲賰 丕賱賲丨賲賱丞"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "賴賱 鬲乇賷丿 亘丿亍 丕賱賵氐賱丞 毓賳丿 丕賱廿賯賱丕毓責"
+msgid "F00f bug"
+msgstr "F00f bug"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "賵氐賱丞 丕賳鬲乇賳鬲"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"賱賯丿 賯賲鬲 亘鬲賴賷卅丞 胤乇賯 賲鬲毓丿丿丞 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲.\n"
-"丕禺鬲乇 丕賱胤乇賷賯丞 丕賱鬲賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕.\n"
-"\n"
+"兀賷 毓賲賷賱 DHCP 鬲乇賷丿 兀賳 鬲爻鬲禺丿賲責\n"
+"丕賱廿賮鬲乇丕囟賷 賴賵 dhcp-client."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "丕禺鬲乇 丕賱賵氐賱丞 丕賱鬲賷 鬲乇賷丿 鬲賴賷卅鬲賴丕"
+msgid "Domain Name:"
+msgstr "丕爻賲 丕賱賳胤丕賯:"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞/亘胤丕賯丕鬲 丕賷孬乇賳鬲"
+msgid "On Floppy"
+msgstr "毓賱賶 賯乇氐 賲乇賳"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LAN connection"
-msgstr "賵氐賱丞 LAN"
+msgid "Restore"
+msgstr "丕爻鬲毓丕丿丞"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "鬲賲 丕賰鬲卮丕賮 賵氐賱丞 賰賷亘賱"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr "if set to yes, check if the network devices are in promiscuous mode."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "賵氐賱丞 賰賷亘賱"
+msgid "Looking for available packages..."
+msgstr "噩丕乇賷 丕賱毓孬賵乇 毓賱賶 丕賱丨夭賲 丕賱賲鬲賵賮乇丞..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected"
-msgstr "鬲賲 丕賰鬲卮丕賮賴"
+msgid "Init Message"
+msgstr "乇爻丕賱丞 Init"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "賵氐賱丞 ADSL"
+msgid "Rescue partition table"
+msgstr "廿賳賯丕匕 噩丿賵賱 丕賱鬲賯爻賷賲"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "detected %s"
-msgstr "鬲賲 丕賰鬲爻丕賮 %s"
+msgid "Connection complete."
+msgstr "鬲賲 丕賱廿鬲氐丕賱."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "賵氐賱丞 ISDN"
+msgid "Cyprus"
+msgstr "賯亘乇氐"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "賵氐賱丞 Winmodem"
+msgid "Remove from RAID"
+msgstr "丕夭丕賱丞 賲賳 RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "鬲賲 丕賰鬲卮丕賮賴 毓賱賶 丕賱賲賳賮匕 %s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "賲賮鬲丕丨 丕賱鬲卮賮賷乇 賴匕丕 亘爻賷胤 噩丿丕 (賷噩亘 兀賳 賷賰賵賳 %d 丨乇賮丕 毓賱賶 丕賱兀賯賱)"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Configuration Wizards"
+msgstr "賲毓丕賱噩丕鬲 丕賱鬲賴賷卅丞"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "賵氐賱丞 賲賵丿賲 毓丕丿賷丞"
+msgid "ISDN connection"
+msgstr "賵氐賱丞 ISDN"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Detecting devices..."
-msgstr "噩丕乇賷 丕賱鬲丨賯賯 賲賳 丕賱兀噩賴夭丞..."
+msgid "primary"
+msgstr "兀爻丕爻賷"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "賵囟毓賷丞 丕賱禺亘賷乇"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "毓賱賶 禺丕丿賲 SMB/Windows \"%s\", 丕賱賲卮丕乇賰丞 \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"賴匕賴 丕賱禺胤賵丞 賴賷 ?禺鬲賷丕乇 丕賱禺丿賲丕鬲 丕賱鬲賷 爻賷鬲賲 鬲卮睾賷賱賴丕 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱.\n"
+"\n"
+"爻賷賯賵賲 DrakX 亘毓乇囟 賯丕卅賲丞 亘賰賱 丕賱禺丿賲丕鬲 丕賱賲鬲賵賮乇丞 賮賷 賴匕丕 丕賱鬲孬亘賷鬲.\n"
+"乇丕噩毓 賰賱 禺丿賲丞 亘鬲賲毓賳 賵 賯賲 亘廿夭丕賱丞 丕賱鬲兀卮賷乇 賲賳 鬲賱賰 丕賱禺丿賲丕鬲 丕賱鬲賷 ? 鬲丨鬲丕噩賴丕\n"
+"亘卮賰賱 丿丕卅賲 毓賳丿 丕?賯賱丕毓.\n"
+"\n"
+"爻賷鬲賲 毓乇囟 卮乇丨 賯氐賷乇 丨賵賱 丕賱禺丿賲丞 毓賳丿\n"
+"丕禺鬲賷丕乇賴丕. 毓賲賵賲丕賸, 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿 賲丕 丕匕丕 賰丕賳鬲 丕賱禺丿賲丞 賲賮賷丿丞 兀賲 ?,\n"
+"賮賲賳 丕?賮囟賱 鬲乇賰 丕賱禺賷丕乇 丕?賮鬲乇丕囟賷.\n"
+"\n"
+"!! 賮賷 賴匕賴 丕賱賲乇丨賱丞 賰賳 丨匕乇丕購 丕匕丕 賰賳鬲 鬲乇賷丿 丕爻鬲禺丿丕賲 賲丕賰賷賳鬲賰\n"
+"賰禺丕丿賲: 乇亘賲丕 賱賳 鬲乇賷丿 亘丿亍 兀賷 禺丿賲丕鬲 ? 鬲丨鬲丕噩賴丕.\n"
+"賮囟賱丕賸 鬲匕賰乇 兀賳 丕賱毓丿賷丿 賲賳 丕賱禺丿賲丕鬲 賯丿 鬲賰賵賳 禺胤乇丞 丕匕丕 賰丕賳鬲\n"
+"賲鬲丕丨丞 毓賱賶 丕賱禺丕丿賲. 亘卮賰賱 毓丕賲 丕禺鬲乇 賮賯胤 丕賱禺丿賲丕鬲 丕賱鬲賷 鬲丨鬲丕噩賴丕.\n"
+"!!"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "丕爻鬲禺丿賲 丕賱鬲丨賯賯 丕賱丌賱賷"
+msgid "Skip"
+msgstr "鬲禺胤賷"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "丕禺鬲乇 丕賱鬲卮賰賷賱 丕賱匕賷 鬲乇賷丿 鬲賴賷卅鬲賴"
+msgid "Niue"
+msgstr "賳賷賵賷"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"兀賴賱丕賸 亘賰 賮賷 賲毓丕賱噩 鬲賴賷卅丞 丕賱卮亘賰丞.\n"
-"\n"
-"賳丨賳 毓賱賶 賵卮賰 鬲賴賷卅丞 賵氐賱丞 丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 丕賱禺丕氐丞 亘賰.\n"
-"丕匕丕 賱賲 鬲乇賷丿 丕爻鬲禺丿丕賲 丕賱鬲丨賯賯 丕賱丌賱賷, 丕丨匕賮 丕賱鬲兀卮賷乇 賲賳 毓賱賶 丕賱氐賳丿賵賯.\n"
+"鬲賳卮胤/鬲禺賲丿 賰賱 賵丕噩賴丕鬲 丕賱卮亘賰丞 丕賱賲賴賷卅丞 賰賷 鬲亘丿兀\n"
+"毓賳丿 亘丿亍 丕賱廿賯賱丕毓."
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"賱兀賳賰 鬲賯賵賲 亘丕賱鬲孬亘賷鬲 毓亘乇 丕賱卮亘賰丞, 賮賯丿 鬲賲鬲 鬲賴賷卅丞 丕賱卮亘賰丞 賲爻亘賯丕賸.\n"
-"丕賳賯乇 賲賵丕賮賯 賱丨賮馗 丕賱鬲賴賷卅丞 丕賱禺丕氐丞 亘賰, 兀賵 丕賳賯乇 丕賱睾丕亍 賱廿毓丕丿丞 鬲賴賷卅丞 賵氐賱丕鬲 丕賱廿賳鬲乇賳鬲 "
-"賵 丕賱卮亘賰丞.\n"
+"鬲乇丿丿 丕賱賲毓丕賱噩 亘丕賱賲賷睾丕賴賷乇鬲夭 (丕賱賲賷睾丕賴賷乇鬲夭 鬲卮賷乇 丕賱賶 丕賱毓丿丿 丕賱鬲賯乇賷亘賷 賲賳 丕賱鬲毓賱賷賲丕鬲 "
+"丕賱鬲賷 賷爻鬲胤賷毓 丕賱賲毓丕賱噩 鬲賳賮賷匕賴丕 賮賷 丕賱孬丕賳賷丞 丕賱賵丕丨丿丞)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "important"
+msgstr "賲賴賲"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "丕噩賲丕賱賷 丕賱鬲賯丿賲"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"爻賷賯賵賲 DrakX 兀賵?賸 亘丕賱鬲丨賯賯 賲賳 賵噩賵丿 兀噩賴夭丞 IDE 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇. 爻賷賯賵賲\n"
+"兀賷囟丕賸 亘丕賱亘丨孬 毓賳 亘胤丕賯丕鬲 PCI SCSI 毓賱賶 賳馗丕賲賰. 丕匕丕 鬲賲 丕賷噩丕丿 亘胤丕賯丞\n"
+"SCSI,爻賷賯賵賲 DrakX 亘鬲孬亘賷鬲 丕賱賲卮睾賱 丕賱賲賳丕爻亘 兀賵鬲賵賲丕鬲賷賰賷丕賸.\n"
"\n"
+"賵 ?賳 毓賲賱賷丞 丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿 賱賷爻鬲 禺丕賱賷丞 賲賳 丕?禺胤丕亍, 爻賷賯賵賲 DrakX 亘爻丐丕賱賰 毓賲賾丕 "
+"丕匕丕\n"
+"賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 PCI SCSI. 丕賱賳賯乇 毓賱賶 \"賳毓賲\" 爻賷毓乇囟 賯丕卅賲丞 亘亘胤丕賯丕鬲 SCSI\n"
+"賱鬲禺鬲丕乇 賲賳賴丕. 丕賳賯乇 \"?\" 丕匕丕 賰賳鬲 鬲毓賱賲 兀賳賴 ? 鬲賵噩丿 亘胤丕賯丕鬲 SCSI 毓賱賶\n"
+"賲丕賰賷賳鬲賰. 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕賸, 賷賲賰賳賰 丕賱鬲兀賰丿 賲賳 賯丕卅賲丞 丕賱毓鬲丕丿 丕賱鬲賷 鬲賲 丕賷噩丕丿賴丕\n"
+"毓賱賶 賲丕賰賷賳鬲賰 毓賳 胤乇賷賯 丕禺鬲賷丕乇 \"毓乇囟 賲毓賱賵賲丕鬲 丕賱毓鬲丕丿\" 賵 賳賯乇\n"
+"\"丕賱鬲丕賱賷->\". 鬲兀賰丿 賲賳 賯丕卅賲丞 丕賱毓鬲丕丿 孬賲 丕囟睾胤 毓賱賶 夭乇 \"丕賱鬲丕賱賷\n"
+"->\" 賱賱毓賵丿丞 丕賱賶 卮丐丕賱 賵丕噩賴丞 SCSI.\n"
"\n"
+"丕匕丕 丕囟胤乇乇鬲 丕賱賶 鬲丨丿賷丿 賲賵丕卅賲 PCI SCSI 賷丿賵賷丕賸, 賮爻賷爻兀賱賰 DrakX 毓賲賾丕 丕匕丕 賰賳鬲\n"
+"鬲乇賷丿 鬲賴賷卅丞 丕賱禺賷丕乇丕鬲 丕賱禺丕氐丞 亘賴丕. 賷噩亘 兀賳 鬲爻賲丨 賱賭 DrakX 亘兀賳 賷鬲丨賯賯 賲賳\n"
+"丕賱毓鬲丕丿 賱賱禺賷丕乇丕鬲 丕賱禺丕氐丞 亘丕賱亘胤丕賯丞 賵 丕賱鬲賷 賷賹購丨鬲丕噩 丕賱賷賴丕 賱賷鬲賲 亘丿亍\n"
+"毓賲賱 丕賱亘胤丕賯丞. 賮賷 兀睾賱亘 丕?賵賯丕鬲, 爻賷賯賵賲 DrakX 亘丕賱禺胤賵丞 丿賵賳 兀賷\n"
+"賲卮丕賰賱.\n"
"\n"
-"賳丨賳 丕賱丌賳 爻賳賯賵賲 亘鬲賴賷卅丞 丕賱賵氐賱丞 %s.\n"
-"\n"
-"丕囟睾胤 賲賵丕賮賯 賱賱賲鬲丕亘毓丞."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "賳丨賳 丕賱丌賳 爻賳賯賵賲 亘鬲賴賷卅丞 丕賱賵氐賱丞 %s."
+"丕匕丕 賱賲 賷鬲賲賰賳 DrakX 賲賳 丕賱鬲毓乇賮 毓賱賶 丕賱禺賷丕乇丕鬲 丕賱囟乇賵乇賷丞賱鬲賲乇賷乇賴丕\n"
+"丕賱賶 丕賱毓鬲丕丿, 賮賮賷 賴匕賴 丕賱丨丕賱 爻鬲丨鬲丕噩 丕賱賶 鬲賴賷卅丞\n"
+"丕賱賲卮睾賾賱 賷丿賵賷丕賸."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "賵氐賱丞 丕賱廿賳鬲乇賳鬲 賵 丕賱廿毓丿丕丿丕鬲"
+msgid "Users"
+msgstr "丕賱賲爻鬲禺丿賲賵賳"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "賯賲 亘廿毓丿丕丿 丕賱廿鬲氐丕賱"
+msgid "Aruba"
+msgstr "兀乇賵亘丕"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "丕賯胤毓 丕賱廿鬲氐丕賱"
+msgid "Preparing bootloader..."
+msgstr "噩丕乇賷 鬲丨囟賷乇 賲丨賲賾賱 丕賱廿賯賱丕毓..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Connect"
-msgstr "丕鬲氐賱"
+msgid "Gateway (e.g. %s)"
+msgstr "丕賱亘賵丕亘丞 (賲孬賱丕賸 %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"賷賲賰賳賰 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
+msgid "The passwords do not match"
+msgstr "賰賱賲丕鬲 丕賱賲乇賵乇 睾賷乇 賲鬲胤丕亘賯丞"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"賷賲賰賳賰 丕賱丌賳 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 兀賵 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
+msgid "Examples for correct IPs:\n"
+msgstr "兀賲孬賱丞 賱毓賳丕賵賷賳 IP 氐丨賷丨丞:\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "兀賳鬲 賱爻鬲 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲 丨丕賱賷丕賸"
+msgid "Frequency (MHz)"
+msgstr "丕賱鬲乇丿丿 (賲賷睾丕賴賷乇鬲夭)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"\n"
-"賷賲賰賳賰 賯胤毓 丕賱廿鬲氐丕賱 兀賵 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "兀賳鬲 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲 丨丕賱賷丕賸"
+"賱丕爻鬲禺丿丕賲 丕禺鬲賷丕乇丕鬲賰 丕賱賲丨賮賵馗丞 賱賱丨夭賲, 賯賲 亘亘丿亍 丕賱鬲孬亘賷鬲 賲毓 禺賷丕乇 ``linux "
+"defcfg=floppy''"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "賷噩亘 兀賳 賷亘丿兀 丕賱毓賳賵丕賳 亘賭 'ftp:' 兀賵 'http:'"
+msgid "the number of the processor"
+msgstr "乇賯賲 丕賱賲毓丕賱噩"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "丕賱亘乇賵賰爻賷 賷噩亘 兀賳 賷賰賵賳 http://..."
+msgid "Hardware clock set to GMT"
+msgstr "爻丕毓丞 丕賱噩賴丕夭 賲囟亘賵胤丞 毓賱賶 鬲賵賯賷鬲 睾乇賷賳鬲卮"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "亘乇賵賰爻賷 FTP"
+msgid "Give a file name"
+msgstr "丕毓胤 丕爻賲 賲賱賮"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "亘乇賵賰爻賷 HTTP"
+msgid "Please choose the port that your printer is connected to."
+msgstr "乇噩丕亍 丕禺鬲乇 丕賱賲賳賮匕 丕賱賲賵氐賱丞 廿賱賷賴 胤丕亘毓鬲賰."
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Proxies configuration"
-msgstr "丕毓丿丕丿丕鬲 丕賱亘乇賵賰爻賷"
+msgid "Change Cd-Rom"
+msgstr "睾賷賾乇 丕賱賯乇氐 丕賱賲丿賲噩"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "毓賳賵丕賳 丕賱亘賵丕亘丕鬲 賷噩亘 兀賳 鬲賰賵賳 毓賱賶 丕賱賳爻賯 1.2.3.4"
+msgid "Paraguay"
+msgstr "丕賱亘丕乇噩賵丕賷"
-#: ../../network/network.pm:1
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "毓賳賵丕賳 禺丕丿賲 DNS 賷噩亘 兀賳 賷賰賵賳 毓賱賶 丕賱賳爻賯 1.2.3.4"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "丕爻鬲禺丿賲 丕賱賳爻禺 丕賱鬲乇丕賰賲賷 (賱丕 鬲爻鬲亘丿賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賯丿賷賲丞)"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "噩賴丕夭 丕賱亘賵丕亘丞"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "賱丕 賷賵噩丿 賲卮睾賱 賲毓乇賵賮 賱亘胤丕賯丞 丕賱氐賵鬲 (%s)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "丕賱亘賵丕亘丞 (賲孬賱丕賸 %s)"
+msgid "force"
+msgstr "丕噩亘丕乇"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "禺丕丿賲 DNS"
+msgid "Exit"
+msgstr "禺乇賵噩"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕爻賲 丕賱賲爻鬲囟賷賮.\n"
-"賷噩亘 兀賳 賷賰賵賳 丕爻賲 丕賱賲爻鬲囟賷賮 氐丕賱丨丕賸 賵 賰丕賲賱丕賸,\n"
-"賲孬賱 ``mybox.mylab.myco.com''.\n"
-"賷賲賰賳賰 兀賷囟丕賸 丕丿禺丕賱 毓賳賵丕賳 IP 丕賱禺丕氐 亘丕賱亘賵丕亘丞 丕賳 賵購噩丿鬲."
+"賲賱丨賵馗丞: 丕毓鬲賲丕丿丕賸 毓賱賶 胤乇丕夭 丕賱胤丕亘毓丞 賵 賳馗丕賲 丕賱胤亘丕毓丞 賮爻賷鬲賲 鬲孬亘賷鬲 丨賵丕賱賷 %d "
+"賲賷睾丕亘丕賷鬲 賲賳 丕賱亘乇賲噩賷丕鬲 丕賱廿囟丕賮賷丞."
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"賱賲 鬲賯賲 亘鬲賴賷卅丞 兀賷 賵丕噩賴丕鬲.\n"
+"賯賲 亘鬲賴賷卅鬲賴賲 兀賵賱丕 毓賳 胤乇賷賯 丕賱囟睾胤 毓賱賶 '鬲賴賷卅丞'"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Estonian"
+msgstr "丕賱廿爻鬲賵賳賷丞"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "毓賳賵丕賳 IP 賷噩亘 兀賳 賷賰賵賳 毓賱賶 丕賱賳爻賯 1.2.3.4"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache 賴賵 禺丕丿賲 賵賷亘. 賵 賷購爻鬲禺丿賲 賱禺丿賲丞 賲賱賮丕鬲 HTML 賵 CGI."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Start at boot"
-msgstr "丕亘丿兀 毓賳丿 丕賱廿賯賱丕毓"
+msgid "Add/Del Clients"
+msgstr "兀囟賮/丕丨匕賮 丕賱毓賲賱丕亍"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "毓賷賾賳 丕爻賲 丕賱賲爻鬲囟賷賮 賲賳 毓賳賵丕賳 DHCP"
+msgid "Choose the network interface"
+msgstr "丕禺鬲乇 賵丕噩賴丞 丕賱卮亘賰丞"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Network Hotplugging"
+msgid "Unknown Model"
+msgstr "胤乇丕夭 睾賷乇 賲毓乇賵賮"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "鬲鬲亘毓 賴賵賷丞 亘胤丕賯丞 丕賱卮亘賰丞 (賲賮賷丿 賱賱噩丕爻亘丕鬲 丕賱丿賮鬲乇賷丞)"
+msgid "CD/DVD burners"
+msgstr "兀噩賴夭丞 賳爻禺 CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP host name"
-msgstr "丕爻賲 賲爻鬲囟賷賮 DHCP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"丕賱鬲噩夭卅丞 丕賱鬲賷 賷鬲賲 丕賯賱丕毓賴丕 丕賮鬲乇丕囟賷丕\n"
+" (賱賭 MS-DOS 賵 賱賷爻 賱賭 lilo)\n"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "廿禺鬲乇 賲賱賮 氐賵乇丞"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "IP address"
-msgstr "毓賳賵丕賳 IP"
+msgid "Firewalling configuration detected!"
+msgstr "鬲賲 丕賰鬲卮丕賮 廿毓丿丕丿 賱賱噩丿丕乇 丕賱賳丕乇賷!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "Connection name"
+msgstr "丕爻賲 丕賱廿鬲氐丕賱"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatic IP"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"丕賱廿丨丿丕孬賷 丕賱爻賷賳賷 賱賱氐賳丿賵賯 丕賱賳氐賷\n"
+"亘毓丿丿 丕賱丨乇賵賮"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
+msgid "Updating package selection"
+msgstr "噩丕乇賷 鬲丨丿賷孬 丕禺鬲賷丕乇 丕賱丨夭賲"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "噩丕乇賷 鬲賴賷卅丞 噩賴丕夭 丕賱卮亘賰丞 %s"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "兀賷賳 鬲乇賷丿 鬲丨賲賷賱 賲賱賮 loopback %s責"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"賮囟賱丕賸 兀丿禺賱 鬲賴賷卅丞 IP 丕賱禺丕氐丞 亘賴匕賴 丕賱賲丕賰賷賳丞.\n"
-"賰賱 賲丕丿丞 賷噩亘 丕丿禺丕賱賴丕 賰毓賳賵丕賳 IP 亘卮賰賱 賲賳賯賵胤\n"
-"(賲孬賱丕賸, 1.2.3.4)."
+"鬲賲 鬲賵賱賷丿 丕賱賯乇氐 丕賱賲乇賳 亘賳噩丕丨.\n"
+"賷賲賰賳賰 丕賱丌賳 丕毓丕丿丞 丕賱鬲孬亘賷鬲."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"鬲丨匕賷乇: 鬲賲鬲 鬲賴賷卅丞 賴匕丕 丕賱噩賴丕夭 爻丕亘賯丕賸 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲.\n"
-"亘賰賱 亘爻丕胤丞 丕賯亘賱 兀賳 鬲購亘賯賷 賴匕丕 丕賱噩賴丕夭 賲毓丿賾.\n"
-"鬲毓丿賷賱 丕賱丨賯賵賱 兀丿賳丕賴 爻賷睾賷賾乇 賴匕賴 丕賱鬲賴賷卅丞."
+msgid "the number of buttons the mouse has"
+msgstr "毓丿丿 兀夭乇丕乇 丕賱賮兀乇丞"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"鬲丨匕賷乇! 鬲賲 廿賷噩丕丿 廿毓丿丕丿 噩丿丕乇 賳丕乇賷 賲賵噩賵丿 賲爻亘賯丕. 乇亘賲丕 鬲丨鬲丕噩 丕賱賶 丕氐賱丕丨 賷丿賵賷 亘毓丿 "
-"丕賱鬲孬亘賷鬲."
-
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "鬲賲 丕賰鬲卮丕賮 廿毓丿丕丿 賱賱噩丿丕乇 丕賱賳丕乇賷!"
+"賮囟賱丕賸 兀丿禺賱 丕賱丿賱賷賱 (兀賵 丕賱賵丨丿丞) 丕賱鬲賷 爻賷鬲賲 賮賷賴丕 賵囟毓\n"
+" 丕賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞 毓賱賶 賴匕丕 丕賱賲爻鬲囟賷賮."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Password"
-msgstr "賰賱賲丞 丕賱賲乇賵乇 賱賱丨爻丕亘"
+msgid "Replay"
+msgstr "丕毓丕丿丞"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "丕爻賲 丕賱賲丿禺賵賱 賱賱丨爻丕亘"
+msgid "Backup other files"
+msgstr "丕賳爻禺 賲賱賮丕鬲 兀禺乇賶"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "丕賱賵賯鬲 丕賱兀賯氐賶 賱賱丕鬲氐丕賱 (亘丕賱孬賵丕賳賷)"
+msgid "No floppy drive available"
+msgstr "賱丕 鬲賵噩丿 爻賵丕賯丞 兀賯乇丕氐 賲乇賳丞"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection speed"
-msgstr "爻乇毓丞 丕賱廿鬲氐丕賱"
+msgid "Backup files are corrupted"
+msgstr "賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賮丕爻丿丞"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Dialing mode"
-msgstr "賵囟毓賷丞 丕賱廿鬲氐丕賱"
+msgid "TV norm:"
+msgstr "TV norm :"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose your country"
-msgstr "廿禺鬲乇 亘賱丿賰"
+msgid "Cpuid family"
+msgstr "毓丕卅賱丞 賴賵賷丞 丕賱賲毓丕賱噩"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 丕賱孬丕賳賷 賱賱賲賵賮乇 (丕禺鬲賷丕乇賷)"
+msgid "32 MB"
+msgstr "32 賲賷睾丕亘丕賷鬲"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 丕賱兀賵賱 賱賱賲賵賮乇 (丕禺鬲賷丕乇賷)"
+msgid "Lithuanian AZERTY (new)"
+msgstr "丕賱賱賷鬲賵丕賳賷丞 AZERTY (噩丿賷丿)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Provider phone number"
-msgstr "乇賯賲 賴丕鬲賮 丕賱賲賵賮乇"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "賳毓賲 鬲毓賳賷 兀賳 丕賱賲毓丕賱噩 丕賱賲爻丕毓丿 賱賱毓賲賱賷丕鬲 丕賱丨爻丕亘賷丞 賱丿賷賴 賲鬲噩賴 賱賱廿爻鬲孬賳丕亍丕鬲"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "丕爻賲 丕賱賲賵賮乇 (賲孬賱丕賸 provider.net)"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"賱賯丿 丕禺鬲乇鬲 鬲噩夭卅丞 RAID 亘乇賲噩賷丞 賰鬲噩夭卅丞 噩匕乇賷丞 (/).\n"
+"賱丕 賷爻鬲胤賷毓 兀賷 賲丨賲賾賱 丕賯賱丕毓 丕賱鬲毓丕賲賱 賲毓 匕賱賰 亘丿賵賳 鬲噩夭卅丞 /boot.\n"
+"賮囟賱丕賸 鬲兀賰丿 賲賳 丕囟丕賮丞 鬲噩夭卅丞 /boot"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "乇賯賲 丕賱賴丕鬲賮 丕賱卮禺氐賷 丕賱禺丕氐 亘賰"
+msgid "Previous"
+msgstr "丕賱爻丕亘賯"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Card IO_1"
+msgid "Other OS (MacOS...)"
+msgstr "賳馗丕賲 丌禺乇 (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Card IO_0"
+msgid "To activate the mouse,"
+msgstr "賱鬲賳卮賷胤 丕賱賮兀乇丞,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Card IO"
+msgid "Bringing up the network"
+msgstr "噩丕乇賷 鬲卮睾賷賱 丕賱卮亘賰丞"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
+msgid "Screenshots will be available after install in %s"
+msgstr "爻鬲賰賵賳 賱賯胤丕鬲 丕賱卮丕卮丞 賲賵噩賵丿丞 亘毓丿 丕賱鬲孬亘賷鬲 賮賷 %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IRQ"
-msgstr "Card IRQ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"賮賷 丕賱兀毓賱賶 爻鬲噩丿 鬲賯爻賷賲丕鬲 賱賷賳賰爻 丕賱賲賵噩賵丿丞 賵 丕賱鬲賷 鬲賲 丕賷噩丕丿賴丕 毓賱賶 丕賱賯乇氐 丕賱氐賱亘 "
+"丕賱禺丕氐 亘賰.\n"
+"賷賲賰賳賰 兀賳 鬲購亘賯賷 廿禺鬲賷丕乇丕鬲 丕賱賲毓丕賱噩, 賵 賴賷 噩賷丿丞 賱兀睾賱亘 兀賳賵丕毓 丕賱鬲孬亘賷鬲.\n"
+"廿匕丕 賯賲鬲 亘毓賲賱 兀賷 鬲睾賷賷乇丕鬲 賮賷噩亘 毓賱賷賰 兀賳 鬲毓乇賮 丕賱鬲賯爻賷賲 丕賱噩匕乇 (\"/\"). 賱丕 鬲禺鬲乇\n"
+"鬲賯爻賷賲丕鬲 囟睾賷乇丞 噩丿丕 賵 廿賱丕 賱賳 鬲爻鬲胤賷毓 鬲孬亘賷鬲 亘乇丕賲噩 賰丕賮賷丞. 廿匕丕 賰賳鬲 鬲乇賷丿 鬲禺夭賷賳 "
+"丕賱亘賷丕賳丕鬲\n"
+"毓賱賶 鬲賯爻賷賲 賲爻鬲賯賱 賮爻鬲丨鬲丕噩 丕賱賶 毓賲賱 鬲賯爻賷賲 賱賭\"/home\"\n"
+"(賲賲賰賳 賮賯胤 廿匕丕 賰丕賳 賱丿賷賰 兀賰孬乇 賲賳 鬲賯爻賷賲 賱賱賷賳賰爻).\n"
+"\n"
+"賰賱 鬲賯爻賷賲 賲購毓胤賶 亘丕賱爻賰賱 丕賱鬲丕賱賷: \"丕賱廿爻賲\", \"丕賱爻毓丞\".\n"
+"\n"
+"\"丕賱廿爻賲\" 賲乇賰亘 亘丕賱爻賰賱 丕賱鬲丕賱賷: \"賳賵毓 丕賱賯乇氐 丕賱氐賱亘\", \"乇賯賲 丕賱賯乇氐 丕賱氐賱亘\",\n"
+"\"乇賯賲 丕賱鬲賯爻賷賲\" (賲孬賱丕, \"hda1\").\n"
+"\n"
+"\"乇賯賲 丕賱賯乇氐 丕賱氐賱亘\" 丿丕卅賲丕 賴賵 丨乇賮 亘毓丿 \"hd\" 兀賵 \"sd\". 亘丕賱賳爻亘丞 賱賱兀賯乇丕氐 "
+"丕賱氐賱亘丞\n"
+"賲賳 賳賵毓 IDE 賮廿賳:\n"
+" * \"a\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱兀爻丕爻賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱兀爻丕爻賷\",\n"
+"\n"
+" * \"b\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱孬丕賳賵賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱兀爻丕爻賷\",\n"
+"\n"
+" * \"c\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱兀爻丕爻賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱孬丕賳賵賷\",\n"
+"\n"
+" * \"d\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱孬丕賳賵賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱孬丕賳賵賷\",\n"
+"\n"
+"兀賲丕 亘丕賱賳爻亘丞 賱兀賯乇丕氐 爻賰夭賷 SCSI 賮丕賱丨乇賮 \"a\" 賷毓賳賷 \"兀賯賱 賲毓乇賮 SCSI\", 賵 丕賱丨乇賮 \"b"
+"\"\n"
+"賷毓賳賷 \"孬丕賳賷 兀賯賱 賲毓乇賮 SCSI\", 丕賱禺."
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "賮囟賱丕賸 丕賲賱兀 兀賵 兀卮賾乇 毓賱賶 丕賱丨賯賱 兀丿賳丕賴"
+msgid "Tanzania"
+msgstr "鬲賳夭丕賳賷丕"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "丕毓丿丕丿丕鬲 丕賱賵氐賱丞"
+msgid "Computing FAT filesystem bounds"
+msgstr "噩丕乇賷 丨爻丕亘 乇賵丕亘胤 賳馗丕賲 賲賱賮丕鬲 FAT"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"\n"
+"Backup Sources: \n"
msgstr ""
-"賱丕 賷亘丿賵 兀賳 丕賱賳馗丕賲 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲.\n"
-"丨丕賵賱 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
+"\n"
+"賲氐丕丿乇 丕賱賲爻丕毓丿 :\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "賱兀爻亘丕亘 兀賲賳賷丞, 爻賷鬲賲 賯胤毓 丕賱廿鬲氐丕賱 丕賱丌賳."
+msgid "Content of the file"
+msgstr "賲丨鬲賵賷丕鬲 丕賱賲賱賮"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "丕賱賳馗丕賲 丕賱丌賳 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "Authentication LDAP"
+msgstr "鬲丨賯賯 LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "噩丕乇賷 丕禺鬲亘丕乇 丕賱賵氐賱丞..."
+msgid "Let me pick any driver"
+msgstr "丕爻賲丨 賱賷 兀賳 兀禺鬲丕乇 賲卮睾賱"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "賴賱 鬲乇賷丿 兀賳 鬲丨丕賵賱 兀賳 鬲鬲氐賱 亘丕賱廿賳鬲乇賳鬲 丕賱丌賳責"
+msgid "Profile "
+msgstr "丕賱鬲卮賰賷賱:"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Internet configuration"
-msgstr "丕毓丿丕丿丕鬲 丕賱廿賳鬲乇賳鬲"
+msgid "transmitted"
+msgstr "賲亘毓賵孬丞"
-#: ../../partition_table/raw.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"賴賳丕賰 卮卅 爻賷卅 賷丨氐賱 賱賱賯乇氐. \n"
-"賱賯丿 賮卮賱 丕禺鬲亘丕乇 賱賱鬲兀賰丿 賲賳 氐丨丞 丕賱亘賷丕賳丕鬲. \n"
-"賴匕丕 賷毓賳賷 兀賳 賰鬲丕亘丞 兀賷 卮卅 毓賱賶 賴匕丕 丕賱賯乇氐 爻賷賳鬲賴賷 亘亘賷丕賳丕鬲 毓卮賵丕卅賷丞 賵 賮丕爻丿丞."
+msgid "Palestine"
+msgstr "賮賱爻胤賷賳"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (丕賮鬲乇丕囟賷)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/cups.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "毓賱賶 禺丕丿賲 CUPS \"%s\""
+msgid "%d comma separated strings"
+msgstr "%d 丨乇賮賷丕鬲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "丕賱胤丕亘毓丕鬲 丕賱亘毓賷丿丞"
+msgid "Here is the full list of keyboards available"
+msgstr "賴丕 賴賷 賯丕卅賲丞 賰丕賲賱丞 亘賰賱 賱賵丨丕鬲 丕賱賲賮丕鬲賷丨 丕賱賲鬲賵賮乇丞"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Theme name"
+msgstr "丕爻賲 丕賱爻賲丞"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "(on this machine)"
-msgstr "(毓賱賶 賴匕丕 丕賱噩賴丕夭)"
+msgid "/_Help"
+msgstr "/_賲爻丕毓丿丞"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(on %s)"
-msgstr "(毓賱賶 %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"賴賳丕 賷賲賰賳賰 丕禺鬲賷丕乇 丕匕丕 賰丕賳鬲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲鬲氐賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 賷賲賰賳 丕賱賵氐賵賱 "
+"丕賱賷賴丕 賲賳 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 賵 毓賳 胤乇賷賯 兀賷 賲丕賰賷賳丕鬲 亘毓賷丿丞."
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "the width of the progress bar"
+msgstr "毓乇囟 卮乇賷胤 丕賱鬲賯丿賲"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Cook Islands"
+msgstr "噩夭乇 丕賱賰賵賰"
-#: ../../printer/data.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Formatting partition %s"
+msgstr "噩丕乇賷 鬲賴賷卅丞 丕賱鬲噩夭卅丞 %s"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Hostname required"
+msgstr "賷購丨鬲丕噩 丕賱賶 丕爻賲 丕賱賲爻鬲囟賷賮"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Unselect fonts installed"
+msgstr "丕丨匕賮 丕禺鬲賷丕乇 丕賱禺胤賵胤 丕賱賲孬亘鬲丞"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Cancel"
+msgstr "丕賱睾丕亍"
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Searching for configured scanners ..."
+msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 賲丕爻丨丕鬲 囟賵卅賷丞 賲毓丿賾丞..."
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "胤乇丕夭 睾賷乇 賲毓乇賵賮"
+msgid "Wheel"
+msgstr "Wheel"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "胤乇丕夭 睾賷乇 賲毓乇賵賮"
+msgid "Videocard"
+msgstr "亘胤丕賯丞 丕賱賮賷丿賷賵"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (丕賱賲賳賮匕 %s)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\t丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 鬲爻鬲禺丿賲 tar 賵 bzip2\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Host %s"
-msgstr "丕賱賲爻鬲囟賷賮 %s"
+msgid "Remove Selected"
+msgstr "丕丨匕賮 丕賱賲丕丿丞 丕賱賲禺鬲丕乇丞"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network %s"
-msgstr "丕賱卮亘賰丞 %s"
+msgid "/Autodetect _modems"
+msgstr "/鬲丨賯賯 丌賱賷 賲賳 兀_噩賴夭丞 丕賱賲賵丿賲"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "丕賱賵丕噩賴丞 \"%s\""
+msgid "Remove printer"
+msgstr "丕丨匕賮 丕賱胤丕亘毓丞"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "丕賱卮亘賰丞/丕賱卮亘賰丕鬲 丕賱賲丨賱賷丞"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"鬲丨匕賷乇!\n"
+"\n"
+"DrakX 爻賷賯賵賲 丕賱丌賳 亘鬲睾賷賷乇 丨噩賲 鬲噩夭卅丞 Windows. 賰賳 丨匕乇丕賸:\n"
+"賴匕賴 丕賱毓賲賱賷丞 禺胤乇丞. 賮廿匕丕 賱賲 鬲賰賳 賮毓賱鬲 匕賱賰,\n"
+"賷噩亘 毓賱賷賰 兀賵賱丕賸 丕賱禺乇賵噩 賲賳 丕賱鬲孬亘賷鬲, 孬賲 卮睾賾賱 scandisk\n"
+"賮賷 Windows (賵 丕禺鬲賷丕乇賷丕賸 defrag), 孬賲 兀毓丿\n"
+"丕賱鬲孬亘賷鬲. 賷噩亘 毓賱賷賰 賰匕賱賰 毓賲賱 賳爻禺丞 丕丨鬲賷丕胤賷丞 賲賳 亘賷丕賳丕鬲賰.\n"
+"毓賳丿賲丕 鬲賰賵賳 賲鬲兀賰丿丕賸, 丕賳賯乇 賲賵丕賮賯."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "胤丕亘毓丞 禺丕賲 (賱丕 賲卮睾賱)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "兀賷 禺丿賲丞 鬲乇賷丿 丕賱爻賲丕丨 賱賱廿賳鬲乇賳鬲 兀賳 鬲鬲氐賱 亘賴丕責"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ", 亘丕爻鬲禺丿丕賲 丕賱兀賲乇 %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"兀賴賱丕 亘賰賲 丕賱賶 兀丿丕丞 鬲賴賷卅丞 丕賱亘乇賷丿.\n"
+"\n"
+"賴賳丕 爻賷賲賰賳賰 廿毓丿丕丿 賳馗丕賲 丕賱鬲賳亘賷賴\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " 毓賱賶 禺丕丿賲 Novell \"%s\", 丕賱胤丕亘毓丞 \"%s\""
+msgid "Other"
+msgstr "兀禺乇賶"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "毓賱賶 禺丕丿賲 SMB/Windows \"%s\", 丕賱賲卮丕乇賰丞 \"%s\""
+msgid "Default"
+msgstr "丕賱廿賮鬲乇丕囟賷"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", 賲爻鬲囟賷賮 TCP/IP \"%s\", 丕賱賲賳賮匕 \"%s\""
+msgid "Button 2 Emulation"
+msgstr "賲丨丕賰丕丞 丕賱夭乇 2"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "毓賱賶 禺丕丿賲 LPD \"%s\", 丕賱胤丕亘毓丞 \"%s\""
+msgid "type1inst building"
+msgstr "亘賳丕亍 type1inst"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", printing to %s"
-msgstr ", 噩丕乇賷 丕賱胤亘丕毓丞 丕賱賶 %s"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ", multi-function device"
-msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮"
+msgid "choose image file"
+msgstr "廿禺鬲乇 賲賱賮 氐賵乇丞"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮 毓賱賶 HP JetDirect"
+msgid "X server"
+msgstr "禺丕丿賲 X"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮 毓賱賶 賲賳賮匕 USB"
+msgid "Domain Admin User Name"
+msgstr "丕爻賲 丕賱賲爻鬲禺丿賲 賱賲丿賷乇 丕賱賳胤丕賯"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮 毓賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 \\#%s"
+msgid "There was an error while scanning for TV channels"
+msgstr "賰丕賳 賴賳丕賰 禺胤兀 兀孬賳丕亍 囟亘胤 賯賳賵丕鬲 丕賱鬲賱賮丕夭"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", 胤丕亘毓丞 USB"
+msgid "US keyboard (international)"
+msgstr "賱賵丨丞 賲賮丕鬲賷丨 兀賲乇賷賰賷丞 (丿賵賱賷)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", 胤丕亘毓丞 USB \\#%s"
+msgid "Not installed"
+msgstr "睾賷乇 賲孬亘賾鬲"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " 毓賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 \\#%s"
+msgid "LAN connection"
+msgstr "賵氐賱丞 LAN"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Local Printers"
-msgstr "丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞"
+msgid "/File/-"
+msgstr "/賲賱賮/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "丨賵賾賱 丕賱賵馗賷賮丞 丕賱賶 丕賱兀賲乇"
+msgid "Italian"
+msgstr "丕賱廿賷胤丕賱賷丞"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "兀丿禺賱 URI 丕賱禺丕氐 亘丕賱胤丕亘毓丞"
+msgid "Basic"
+msgstr "兀爻丕爻賷"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 NetWare"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" 噩賲賷毓 丕賱丨賯賵賯 賲丨賮賵馗丞 (C) 2002 賱賭MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 SMB/Windows 95/98/NT"
+msgid "Honduras"
+msgstr "賴賳丿賵乇丕爻"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "胤丕亘毓丞 卮亘賰丞 (TCP/Socket)"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 lpd 亘毓賷丿"
+msgid "Card IO"
+msgstr "Card IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 CUPS 亘毓賷丿"
+msgid "when checked, owner and group won't be changed"
+msgstr "毓賳丿 丕賱鬲兀卮賷乇 賱賳 賷鬲賲 鬲睾賷賷乇 丕賱賲丕賱賰 賵 丕賱賲噩賲賵毓丞"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "胤丕亘毓丞 亘毓賷丿丞"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"鬲噩夭卅丞 丕賱廿賯賱丕毓\n"
+"賴匕賴 賴賷\n"
+"賱賱廿賯賱丕毓 丕賱賲夭丿賵噩 賮賷 賳馗丕賲賰.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Local printer"
-msgstr "胤丕亘毓丞 賲丨賱賷丞"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"賮囟賱丕賸 丕禺鬲乇 賱賰賱 禺胤賵丞 丕匕丕 賰賳鬲 爻鬲賯賵賲 亘廿毓丕丿鬲賴丕 丌賱賷丕賸 兀賲 兀賳賰 鬲乇賷丿 兀賳 賷賰賵賳 丕賱鬲孬亘賷鬲 "
+"亘卮賰賱 賷丿賵賷."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "噩丕乇賷 廿毓丿丕丿 丕賱鬲胤亘賷賯丕鬲..."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"賷賲賰賳賰 兀賷囟丕賸 兀賳 鬲賯乇乇 賴賳丕 丕匕丕 賰丕賳鬲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 賷噩亘 "
+"兀賳 鬲賰賵賳 賲鬲賵賮乇丞 賱賴匕毓 丕賱賲丕賰賷賳丞."
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "噩丕乇賷 丕夭丕賱丞 丕賱胤丕亘毓丞 \"%s\" ..."
+msgid "Russian (Yawerty)"
+msgstr "丕賱乇賾賵爻賷丞 (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "賴賱 鬲乇賷丿 賮毓賱丕賸 丨匕賮 丕賱胤丕亘毓丞 \"%s\"責"
+msgid "You must enter a device or file name!"
+msgstr "賷噩亘 毓賱賷賰 丕丿禺丕賱 噩賴丕夭 兀賵 丕爻賲 賲賱賮!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove printer"
-msgstr "丕丨匕賮 丕賱胤丕亘毓丞"
+msgid "/_Quit"
+msgstr "/_禺乇賵噩"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "鬲毓賱賲 賰賷賮 鬲爻鬲禺丿賲 賴匕賴 丕賱胤丕亘毓丞"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"鬲丨鬲丕噩 丕賱賶 alcatel microcode.\n"
+"賯賲 亘鬲賳夭賷賱賴丕 毓賱賶\n"
+"http://www.speedtouchdsl.com/dvreg_lx.htm\n"
+"賵 丕賳爻禺 丕賱賲賱賮 mgmt.o 丕賱賶 /usr/share/speedtouch"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "丕胤亘毓 氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
+msgid "Graphics memory: %s kB\n"
+msgstr "匕丕賰乇丞 亘胤丕賯丞 丕賱卮丕卮丞: %s 賰賷賱賵亘丕賷鬲\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "鬲毓匕乇 丨匕賮 丕賱胤丕亘毓丞 \"%s\" 賲賳 Star Office/OpenOffice.org/GIMP."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" 賴匕丕 丕賱亘乇賳丕賲噩 賴賵 亘乇賳丕賲噩 丨乇; 賷賲賰賳賰 丕毓丕丿丞 鬲賵夭賷毓丞 賵/兀賵 鬲毓丿賷賱賴\n"
+" 鬲丨鬲 亘賳賵丿 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 (GPL) 賰賲丕 賳購卮賽乇鬲 毓賳 胤乇賷賯\n"
+" 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞; 廿賲丕 丕廿氐丿丕乇 丕賱孬丕賳賷 賲賳 丕賱鬲乇禺賷氐 兀賵\n"
+" 兀賷 賳爻禺丞 鬲丕賱賷丞 (丨爻亘 丕禺鬲賷丕乇賰).\n"
+"\n"
+" 賴匕丕 丕賱亘乇賳丕賲噩 賷購賵夭賾賻毓 毓賱賶 兀賲賱 兀賳 賷賰賵賳 賲賮賷丿丕,\n"
+" 賱賰賳 丿賵賳 兀賷 囟賲丕賳鈥; 丨鬲賶 亘丿賵賳 丕賱囟賲丕賳丞 丕賱賲賮賴賵賲丞\n"
+" 賱賱廿鬲噩丕乇 兀賵 丕賱賲賳丕爻亘丞 賱睾乇囟 賲毓賷賳. 丕賳馗乇\n"
+" 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 賱賱鬲賮丕氐賷賱.\n"
+"\n"
+" 賷噩亘 兀賳 鬲賰賵賳 賯丿 鬲爻賱賲鬲 賳爻禺丞 賲賳 鬲乇禺賷氐 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞\n"
+" 賲毓 丕賱亘乇賳丕賲噩; 賮賷 丨丕賱丞 毓丿賲 鬲爻賱賲 丕賱乇禺氐丞 乇丕爻賱 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞 毓賱賶 丕賱毓賳賵丕賳 "
+"丕賱鬲丕賱賷\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
+"02111-1307,\n"
+" USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "鬲賲 丨匕賮 丕賱胤丕亘毓丞 \"%s\" 賲賳 Star Office/OpenOffice.org/GIMP 亘賳噩丕丨."
+msgid "access to compilation tools"
+msgstr "丕賱賵氐賵賱 丕賱賶 兀丿賵丕鬲 丕賱鬲噩賲賷毓"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "噩丕乇賷 丨匕賮 丕賱胤丕亘毓丞 賲賳 Star Office/OpenOffice.org/GIMP"
+msgid "Please select data to restore..."
+msgstr "乇噩丕亍 丕禺鬲乇 鬲丕乇賷禺 丕賱廿爻鬲毓丕丿丞..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "丕丨匕賮 賴匕賴 丕賱胤丕亘毓丞 賲賳 Star Office/OpenOffice.org/GIMP"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"丕匕丕 賰賳鬲 鬲乇賷丿 丕爻鬲禺丿丕賲 aboot, 賮賱丕 鬲賳爻賶 兀賳 鬲鬲乇賰 賲爻丕丨丞 賮丕乇睾丞 賮賷\n"
+"亘丿丕賷丞 丕賱賯乇氐 (2048 賯胤丕毓丕鬲 賰丕賮賷丞)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "鬲毓匕乇鬲 丕囟丕賮丞 丕賱胤丕亘毓丞 \"%s\" 丕賱賶 Star Office/OpenOffice.org/GIMP."
+msgid "Standard test page"
+msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 賯賷丕爻賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "鬲賲鬲 丕囟丕賮丞 丕賱胤丕亘毓丞 \"%s\" 丕賱賶 Star Office/OpenOffice.org/GIMP 亘賳噩丕丨."
+msgid "Create"
+msgstr "丕賳卮丕亍 鬲噩夭卅丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "噩丕乇賷 丕囟丕賮丞 丕賱胤丕亘毓丞 丕賱賶 Star Office/OpenOffice.org/GIMP"
+msgid "What"
+msgstr "賲丕匕丕 "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "兀囟賮 賴匕賴 丕賱胤丕亘毓丞 丕賱賶 Star Office/OpenOffice.org/GIMP"
+msgid "There was an error ordering packages:"
+msgstr "賰丕賳 賴賳丕賰 禺胤兀 賮賷 鬲乇鬲賷亘 丕賱丨夭賲:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "鬲賲 鬲毓賷賷賳 丕賱胤丕亘毓丞 \"%s\" 賰胤丕亘毓丞 丕賮鬲乇丕囟賷丞 丕賱丌賳."
+msgid "Bulgarian (BDS)"
+msgstr "丕賱亘賱睾丕乇賷丞 (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Default printer"
-msgstr "丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞"
+msgid "Disable Server"
+msgstr "毓胤賾賱 丕賱禺丕丿賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "毓賷賾賳 賴匕賴 丕賱胤丕亘毓丞 賰胤丕亘毓丞 丕賮鬲乇丕囟賷丞"
+msgid "Filesystem encryption key"
+msgstr "賲賮鬲丕丨 鬲卮賮賷乇 賳馗丕賲 丕賱賲賱賮丕鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer options"
-msgstr "禺賷丕乇丕鬲 丕賱胤丕亘毓丞"
+msgid "Gujarati"
+msgstr "睾賵噩丕乇丕鬲賷"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "賲氐賳賾毓 丕賱胤丕亘毓丞, 丕賱胤乇丕夭"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "賲氐賳賾毓 丕賱胤丕亘毓丞, 丕賱胤乇丕夭, 丕賱賲卮睾賾賱"
+msgid "Save theme"
+msgstr "丕丨賮馗 丕賱爻賲丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "噩丕乇賷 丕夭丕賱丞 丕賱胤丕亘毓丞 丕賱賯丿賷賲丞 \"%s\" ..."
+msgid "group"
+msgstr "丕賱賲噩賲賵毓丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "丕爻賲 丕賱胤丕亘毓丞, 賵氐賮, 丕賱賲賰丕賳"
+msgid "Brazil"
+msgstr "丕賱亘乇丕夭賷賱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Printer connection type"
-msgstr "賳賵毓 賵氐賱丞 丕賱胤丕亘毓丞"
+msgid "Auto Install"
+msgstr "鬲孬亘賷鬲 丌賱賷"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "胤丕亘毓丞 禺丕賲"
+msgid "Network Configuration Wizard"
+msgstr "賲毓丕賱噩 廿毓丿丕丿 丕賱卮亘賰丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "丕賮毓賱賴丕!"
+msgid "Removable media automounting"
+msgstr "丕賱鬲丨賲賷賱 丕賱丌賱賷 賱賱賵爻丕卅胤 丕賱賯丕亘賱丞 賱賱廿夭丕賱丞"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../services.pm:1
#, c-format
-msgid "Close"
-msgstr "廿睾賱丕賯"
+msgid "Printing"
+msgstr "丕賱胤亘丕毓丞"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Unkown driver"
+msgstr "賲卮睾賱 睾賷乇 賲毓乇賵賮"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"丕賱胤丕亘毓丞 %s\n"
-"賴賱 鬲乇賷丿 鬲毓丿賷賱 鬲賱賰 丕賱胤丕亘毓丞責"
+"There are no printers found which are directly connected to your machine"
+msgstr "賱賲 賷鬲賲 丕賱毓孬賵乇 毓賱賶 胤丕亘毓丕鬲 賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賴匕賴 丕賱賲丕賰賷賳丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "鬲毓丿賷賱 丕毓丿丕丿丕鬲 丕賱胤丕亘毓丞"
+msgid "Create a new partition"
+msgstr "丕賳卮卅 鬲噩夭卅丞 噩丿賷丿丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "兀囟賮 胤丕亘毓丞 噩丿賷丿丞"
+msgid "Driver:"
+msgstr "丕賱賲卮睾賱:"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+# ../../standalone/harddrake2:1, c-format
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Normal Mode"
-msgstr "賵囟毓 毓丕丿賷"
+msgid "unknown"
+msgstr "睾賷乇 賲毓乇賵賮"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "鬲睾賷賷乇 賳馗丕賲 丕賱胤亘丕毓丞"
+msgid "Use fdisk"
+msgstr "丕爻鬲禺丿賲 fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS 鬲賴賷卅丞"
+msgid "MOVE YOUR WHEEL!"
+msgstr "丨乇賰 毓噩賱丞 丕賱賮兀乇丞!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "兀毓丿 鬲丨賲賷賱 賯丕卅賲丞 丕賱胤丕亘毓丕鬲 (賱毓乇囟 賰賱 胤丕亘毓丕鬲 CUPS 丕賱亘毓賷丿丞 丕賱賲鬲賵賮乇丞)"
+msgid "sent: "
+msgstr "賲購乇爻賱: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "丕毓乇囟 賰賱 胤丕亘毓丕鬲 CUPS 丕賱亘毓賷丿丞 丕賱賲鬲賵賮乇丞"
+msgid "Automatic IP"
+msgstr "Automatic IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"鬲賲鬲 鬲賴賷卅丞 丕賱胤丕亘毓丕鬲 丕賱丌鬲賷丞. 丕賳賯乇 賳賯乇丞 賲夭丿賵噩丞 毓賱賶 丕賱胤丕亘毓丞 賱鬲睾賷賷乇 丕毓丿丕丿丕鬲賴丕 "
-"賱噩毓賱賴丕 胤丕亘毓丞 丕賮鬲乇丕囟賷丞 兀賵 賱乇丐賷丞 賲毓賱賵賲丕鬲 丨賵賱賴丕."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "賳馗丕賲 丕賱胤亘丕毓丞: "
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 丕賱亘乇丕賲噩 丕賱賲孬亘賾鬲丞..."
+msgid "Configuration of a remote printer"
+msgstr "鬲賴賷卅丞 胤丕亘毓丞 亘毓賷丿丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "噩丕乇賷 鬲孬亘賷鬲 Foomatic..."
+msgid "Moldova"
+msgstr "賲賵賱丿賵賮丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "鬲毓匕乇鬲 鬲賴賷卅丞 丕賱胤丕亘毓丞 \"%s\"!"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 賲爻丨 丕賱卮乇賷胤 賯亘賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "噩丕乇賷 廿毓丿丕丿 丕賱胤丕亘毓丞 \"%s\" ..."
+msgid "An online platform to respond to enterprise support needs."
+msgstr "亘賷卅丞 毓賱賶 丕賱廿賳鬲乇賳鬲 賱賱廿爻鬲噩丕亘丞 賱丕丨鬲賷丕噩丕鬲 丕賱丿毓賲 丕賱賮賳賷 賱賱卮乇賰丕鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "噩丕乇賷 賯乇丕亍丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丞..."
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "賷噩亘 兀賳 賷亘丿兀 丕賱毓賳賵丕賳 亘賭 'ftp:' 兀賵 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "兀賷 賳馗丕賲 胤亘丕毓丞 鬲乇賷丿 兀賳 鬲爻鬲禺丿賲責"
+msgid "Add a new rule at the end"
+msgstr "兀囟賮 賯丕毓丿丞 噩丿賷丿丞 賮賷 丕賱賳賴丕賷丞"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "丕禺鬲乇 Printer Spooler"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"賷賲賰賳賰 賰匕賱賰 兀賳 鬲賯乇乇 賴賳丕 丕匕丕 賰丕賳鬲 丕賱胤丕亘毓丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱兀噩賴夭丞 丕賱亘毓賷丿丞 兀賳 "
+"鬲賰賵賳 賲鬲賵賮乇丞 丌賱賷丕賸 賱賴匕賴 丕賱賲丕賰賷賳丞."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "噩丕乇賷 鬲毓賷賷賳 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"賷賲賰賳賰 丕賱丌賳 丕毓胤丕亍 丕賱禺賷丕乇丕鬲 賱賱賵丨丿丞 %s.\n"
+"丕賱禺賷丕乇丕鬲 賮賷 賴賷卅丞 ``name=value name2=value2 ...'' \n"
+"賲孬賱丕, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "噩丕乇賷 鬲孬亘賷鬲 %s ..."
+msgid "Quit without writing the partition table?"
+msgstr "賴賱 鬲乇賷丿 丕賱禺乇賵噩 亘丿賵賳 賰鬲丕亘丞 噩丿賵賱 丕賱鬲賯爻賷賲責"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "噩丕乇賷 丨匕賮 %s ..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"賳馗丕賲 丕賱胤亘丕毓丞 (%s) 賱賳 賷鬲賲 亘丿丐賴 亘卮賰賱 丌賱賷 毓賳丿 亘丿亍 鬲卮睾賷賱 丕賱賲丕賰賷賳丞.\n"
-"\n"
-"賲賳 丕賱賲賲賰賳 兀賳 賷賰賵賳 賯丿 鬲賲 鬲毓胤賷賱 丕賱亘丿亍 丕賱丌賱賷 亘爻亘亘 丕賱鬲睾賷賷乇 丕賱賶 賲爻鬲賵賶 兀毓賱賶 賱兀賳 "
-"賳馗丕賲 丕賱胤亘丕毓丞 賯丿 賷賰賵賳 賳賯胤丞 賲亘丿卅賷丞 賱賴噩賲丕鬲 丕賱賲禺鬲乇賯賷賳.\n"
-"\n"
-"賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱亘丿亍 丕賱丌賱賷 賱賳馗丕賲 丕賱胤亘丕毓丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱 賲乇丞 兀禺乇賶責"
+msgid "Installing packages..."
+msgstr "噩丕乇賷 鬲乇賰賷亘 丕賱噩夭賲..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "亘丿亍 賳馗丕賲 丕賱胤亘丕毓丞 毓賳丿 丕賱廿賯賱丕毓"
+msgid "Dutch"
+msgstr "丕賱賴賵賱賳丿賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"兀賳鬲 毓賱賶 賵卮賰 鬲孬亘賷鬲 賳馗丕賲 丕賱胤亘丕毓丞 %s 毓賱賶 賳馗丕賲 賷毓賲賱 毓賱賶 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 %s.\n"
-"賳馗丕賲 丕賱胤亘丕毓丞 賷卮睾賾賱 賲乇丕賯亘 (毓賲賱賷丞 禺賱賮賷丞) 賷賯賵賲 亘丕賳鬲馗丕乇 賵馗丕卅賮 丕賱胤亘丕毓丞 賵 賷鬲毓丕賲賱 "
-"賲毓賴丕. 賴匕丕 丕賱賲乇丕賯亘 賷賲賰賳 丕賱賵氐賵賱 丕賱賷賴 毓賳 賲賳 賯賽亘賱 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 毓賱賶 丕賱卮亘賰丞 賵 "
-"賱匕丕 賮賯丿 賷賲賰賳 兀賳 賷賰賵賳 賳賯胤丞 賲亘丿卅賷丞 賱賴噩賲丕鬲 丕賱賲禺鬲乇賯賷賳. 賱賴匕丕 賷鬲賲 丕禺鬲賷丕乇 丕賱賯賱賷賱 賲賳 "
-"丕賱賲乇丕賯亘丕鬲 賱鬲卮睾賷賱賴丕 丕賮鬲乇丕囟賷丕賸 毓賱賶 賴匕丕 丕賱賲爻鬲賵賶 丕賱兀賲賳賷.\n"
-"\n"
-"賴賱 鬲乇賷丿 賮毓賱丕賸 鬲賴賷卅丞 丕賱胤亘丕毓丞 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞責"
+msgid "The following packages need to be installed:\n"
+msgstr "賷噩亘 鬲孬亘賷鬲 丕賱丨夭賲 丕賱鬲丕賱賷丞:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "噩丕乇賷 鬲孬亘賷鬲 賳馗丕賲 胤亘丕毓丞 賮賷 賲爻鬲賵賶 丕賱兀賲賳 %s"
+msgid "Angola"
+msgstr "兀賳睾賵賱丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "paranoid"
-msgstr "賲乇鬲賮毓 亘噩賳賵賳"
+msgid "service setting"
+msgstr "廿毓丿丕丿丕鬲 丕賱禺丿賲丕鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "high"
-msgstr "賲乇鬲賮毓"
+msgid "Custom"
+msgstr "賲禺氐氐"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "噩丕乇賷 丕毓丕丿丞 鬲卮睾賷賱 賳馗丕賲 丕賱胤亘丕毓丞..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "賴匕丕 丕賱賲賱賮 賲爻鬲禺丿賲 賲賳 loopback 兀禺乇賶, 丕禺鬲乇 賲賱賮丕 丌禺乇"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "鬲賴賷卅丞 胤丕亘毓丞 亘毓賷丿丞"
+msgid "Read-only"
+msgstr "賱賱賯乇丕亍丞 賮賯胤"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "賱丕鬲賮賷丕"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "賱丕 賷賵噩丿 賲卮睾賱 賲毓乇賵賮"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 賲賷睾丕亘丕賷鬲"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"丕賱賵氐賵賱 丕賱賶 丕賱卮亘賰丞 賱丕 賷毓賲賱 賵 賱賲 賷賲賰賳 亘丿丐賴. 賮囟賱丕賸 鬲兀賰丿 賲賳 丕賱鬲賴賷卅丞 賱丿賷賰 賵 丕賱毓鬲丕丿 "
-"丕賱禺丕氐 亘賰. 孬賲 丨丕賵賱 鬲賴賷卅丞 丕賱胤丕亘毓丞 丕賱亘毓賷丿丞 賲乇丞 兀禺乇賶."
+"丕匕丕 賱賲 鬲賰賳 賴匕賴 賴賷 丕賱鬲賷 鬲乇賷丿 鬲賴賷卅鬲賴丕, 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"賱丕 賷賲賰賳 亘丿亍 鬲賴賷卅丞 丕賱卮亘賰丞 丕賱鬲賷 鬲賲 毓賲賱賴丕 兀孬賳丕亍 丕賱鬲孬亘賷鬲 丕賱丌賳. 賮囟賱丕賸 鬲兀賰丿 丕匕丕 賰丕賳 "
-"賷賲賰賳 丕賱賵氐賵賱 丕賱賶 丕賱卮亘賰丞 亘毓丿 丕賯賱丕毓 丕賱賳馗丕賲 賵 氐丨賾丨 丕賱鬲賴賷卅丞 亘丕爻鬲禺丿丕賲 賲乇賰夭 鬲丨賰賲 "
-"Mandrake 賮賷 賯爻賲 \"丕賱卮亘賰丞 賵 丕賱廿賳鬲乇賳鬲\"/\"丕賱賵氐賱丕鬲\", 賵 亘毓丿 匕賱賰 賯賲 亘鬲賴賷卅丞 "
-"丕賱胤丕亘毓丞, 賰匕賱賰 亘丕爻鬲禺丿丕賲 賲乇賰夭 鬲丨賰賲 Mandrake 賮賷 賯爻賲 \"丕賱毓鬲丕丿\"/\"丕賱胤丕亘毓丞\""
+"鬲毓匕乇 丕賷噩丕丿 亘胤丕賯丞 氐賵鬲 毓賱賶 噩賴丕夭賰. 賮囟賱丕賸 鬲兀賰丿 賲賳 兀賳 亘胤丕賯丞 丕賱氐賵鬲 丕賱賲丿毓賵賲丞 賲賳 "
+"賱賷賳賰爻 賲賵氐賵賱丞 亘卮賰賱 氐丨賷丨.\n"
+"\n"
+"\n"
+"賷賲賰賳賰 夭賷丕乇丞 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱毓鬲丕丿 丕賱賲丿毓賵賲 丕賱禺丕氐丞 亘賳丕 毓賱賶:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Configure the network now"
-msgstr "賯賲 亘鬲賴賷卅丞 丕賱卮亘賰丞"
+msgid "Configure Local Area Network..."
+msgstr "廿毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "鬲丕亘毓 丿賵賳 鬲賴賷卅丞 丕賱卮亘賰丞"
+msgid "Launch the sound system on your machine"
+msgstr "賷卮睾賱 賳馗丕賲 丕賱氐賵鬲 毓賱賶 噩賴丕夭賰"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 胤丕亘毓丞 亘毓賷丿丞. 賴匕丕 賷丨鬲丕噩 丕賱賶 兀賳 鬲賰賵賳 賵氐賱丞 丕賱卮亘賰丞 鬲毓賲賱 賵 賱賰賳 "
-"丕賱卮亘賰丞 賱賲 賷鬲賲 丕毓丿丕丿賴丕 丨鬲賶 丕賱丌賳. 丕匕丕 賰賳鬲 鬲乇賷丿 丕賱賲鬲丕亘毓丞 丿賵賳 鬲賴賷卅丞 丕賱卮亘賰丞, "
-"爻鬲賰賵賳 賯丕丿乇丕賸 毓賱賶 丕爻鬲禺丿丕賲 丕賱胤丕亘毓丞 丕賱鬲賷 鬲賯丞賲 亘鬲賴賷卅鬲賴丕 丕賱丌賳. 賰賷賮 鬲乇賷丿 丕賱賲鬲丕亘毓丞責"
+msgid "Preparing printer database..."
+msgstr "噩丕乇賷 鬲丨囟賷乇 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "賱賲 賷鬲賲 鬲丨丿賷丿 賵馗賷賮賷丞 丕賱卮亘賰丞"
+msgid "Information"
+msgstr "賲毓賱賵賲丕鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "噩丕乇賷 亘丿亍 丕賱卮亘賰丞..."
+msgid "No network card"
+msgstr "賱丕 鬲賵噩丿 亘胤丕賯丞 卮亘賰丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "噩丕乇賷 丕毓丕丿丞 鬲丨賲賷賱 亘賷丕賳丕鬲 丕賱胤丕亘丞..."
+msgid "Which filesystem do you want?"
+msgstr "兀賷 賳馗丕賲 賲賱賮丕鬲 鬲乇賷丿責"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 兀夭乇丕乇"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "賲毓賱賵賲丕鬲 賲賮氐賾賱丞"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "賲丕賱胤丞"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"賱賯丿 賯賲鬲 亘賳賯賱 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞 丕賱爻丕亘賯丞 (\"%s\"), 賴賱 賷噩亘 兀賷囟丕賸 兀賳 鬲賰賵賳 "
-"丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞 鬲丨鬲 賳馗丕賲 丕賱胤亘丕毓丞 丕賱噩丿賷丿 %s責"
+"丕毓丿丕丿丕鬲 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞\n"
+"\n"
+"賷噩亘 毓賱賷賰 丕賱鬲兀賰丿 丕匕丕 賰丕賳 丨噩賲 丕賱氐賮丨丞 賵 賳賵毓 丕賱丨亘乇/賵囟毓 丕賱胤亘丕毓丞 (丕賳 賵噩丿) 亘丕賱廿囟丕賮丞 "
+"丕賱賶 丕毓丿丕丿丕鬲 丕賱毓鬲丕丿 賱胤丕亘毓丕鬲 丕賱賱賷夭乇 (丕賱匕丕賰乇丞, 賵丨丿丕鬲 丕賱丿賵亘賱賰爻, 丕賱賲賳氐丕鬲 "
+"丕賱廿囟丕賮賷丞) 賲毓丿賾丞 亘卮賰賱 氐丨賷丨. 賱丕丨馗 兀賳 噩賵丿丞 胤亘丕毓丞 毓丕賱賷丞 噩丿丕賸 賯丿 鬲噩賴賱 丕賱胤亘丕毓丞 亘胤賷卅丞."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "賳賯賱 廿毓丿丕丿丕鬲 丕賱胤丕亘毓丞"
+msgid "This floppy is not FAT formatted"
+msgstr "賴匕丕 丕賱賯乇氐 丕賱賲乇賳 睾賷乇 賲噩賴夭 毓賱賶 賳馗丕賲 賲賱賮丕鬲 FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "噩丕乇賷 賳賯賱 %s..."
+msgid "Configuring network"
+msgstr "噩丕乇賷 丕毓丿丕丿 丕賱卮亘賰丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "New printer name"
-msgstr "丕爻賲 丕賱胤丕亘毓丞 丕賱噩丿賷丿丞"
+msgid "Graphic Card"
+msgstr "亘胤丕賯丞 丕賱卮丕卮丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"丕賱胤丕亘毓丞 \"%s\" 賲賵噩賵丿丞 賲爻亘賯丕賸,\n"
-"賴賱 鬲乇賷丿 賮毓賱丕賸 丕賱賰鬲丕亘丞 賮賵賯 丕賱鬲賴賷卅丞 丕賱禺丕氐丞 亘賴丕責"
+msgid "Resizing Windows partition"
+msgstr "噩丕乇賷 鬲睾賷賷乇 丨噩賲 鬲噩夭卅丞 Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "丕爻賲 丕賱胤丕亘毓丞 賷噩亘 兀賳 賷丨鬲賵賷 賮賯胤 毓賱賶 丨乇賵賮 賵 兀乇賯丕賲 賵 卮丕乇胤丕鬲 鬲丨鬲賷丞"
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 丕賱兀賵賱 賱賱賲賵賮乇 (丕禺鬲賷丕乇賷)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "丕賳賯賱"
+msgid "Cameroon"
+msgstr "丕賱賰丕賲賷乇賵賳"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"丕賱胤丕亘毓丞 丕賱賲爻賲丕丞 \"%s\" 賲賵噩賵丿丞 賲爻亘賯丕 鬲丨鬲 %s. \n"
-"丕賳賯乇 \"丕賳賯賱\" 賱賱賰鬲丕亘丞 賮賵賯賴.\n"
-"賷賲賰賳賰 賰匕賱賰 賰鬲丕亘丞 丕爻賲 噩丿賷丿 兀賵 鬲丨胤賷 賴匕賴 丕賱胤丕亘毓丞."
+"賷賲賰賳賰 丕賱丌賳 鬲噩夭卅丞 %s.\n"
+"毓賳丿賲丕 鬲賳鬲賴賷 賱丕 鬲賳爻賶 丕賱丨賮馗 亘丕爻鬲禺丿丕賲 `w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "賱丕 鬲賳賯賱 丕賱胤丕亘毓丕鬲"
+msgid "Close"
+msgstr "廿睾賱丕賯"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"\n"
-"毓賱賾賲 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲乇賷丿 賳賯賱賴丕 孬賲 丕賳賯乇 \n"
-"\"丕賳賯賱\"."
+"\"%s\": 鬲兀賰丿 賲賳 丕禺鬲賷丕乇 丕賱亘賱丿 丕賱丨丕賱賷. 丕匕丕 賱賲 鬲賰賳 賮賷 賴匕丕\n"
+"丕賱亘賱丿, 丕囟睾胤 毓賱賶 夭乇 \"%s\" 賵 丕禺鬲乇 亘賱丿丕賸 丌禺乇. 丕匕丕 賱賰 鬲賰賳\n"
+"亘賱丿賰 賮賷 丕賱賯丕卅賲丞 丕囟睾胤 夭乇 \"丕賱賲夭賷丿\" 賱廿馗賴乇 賯丕卅賲丞 賰丕賲賱丞\n"
+"亘丕賱亘賱丿丕賳."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "丕賱鬲賯賵賷賲"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"兀賷囟丕賸 丕賱胤丕亘毓丕鬲 丕賱賲賴賷卅丞 亘賲賱賮丕鬲 PPD 賲賳 賲氐賳賾毓賷賴丕 兀賵 亘賲卮睾賱丕鬲 CUPS 丕賱禺丕氐丞 亘賴丕 賱丕 "
-"賷賲賰賳 賳賯賱賴丕."
+"丕爻鬲毓丿 賲丿禺賱\n"
+"丕賱賰鬲丕賱賵睾 丕賱賲禺鬲丕乇"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"亘丕賱廿囟丕賮丞 丕賱賶 匕賱賰, 賮廿賳 丕賱氐賮賵賮 丕賱鬲賷 賱賲 賷鬲賲 毓賲賱賴丕 亘賴匕丕 丕賱亘乇賳丕賲丨 兀賵 \"foomatic-"
-"configure\" 賱丕 賷賲賰賳 賳賯賱賴丕."
+"賱丕爻鬲禺丿丕賲 胤丕亘毓丞 lpd 亘毓賷丿丞, 毓賱賷賰 丕毓胤丕亍 丕爻賲 賲爻鬲囟賷賮 禺丕丿賲 丕賱胤丕亘毓丞 賵 丕爻賲 丕賱胤丕亘毓丞 "
+"毓賱賶 匕賱賰 丕賱禺丕丿賲."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD 賵 LPRng 賱丕 鬲丿毓賲 胤丕亘毓丕鬲 IPP.\n"
+msgid "Iceland"
+msgstr "丌賷爻賱賳丿丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ 賷丿毓賲 賮賯胤 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賵 胤丕亘毓丕鬲 LPD 丕賱亘毓賷丿丞 賵 胤丕亘毓丕鬲 Socket/TCP.\n"
+msgid "consolehelper missing"
+msgstr "consolehelper missing"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS 賱丕 賷丿毓賲 丕賱胤丕亘毓丕鬲 毓賱賶 兀噩賴夭丞 Novell 丕賱禺丕丿賲丞 兀賵 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲乇爻賱 "
-"丕賱亘賷丕賳丕鬲 丕賱賶 兀賲乇 丨乇.\n"
+msgid "stopped"
+msgstr "賲鬲賵賯賮丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"賷賲賰賳賰 賳賯賱 鬲賴賷卅丞 丕賱胤丕亘毓丞 丕賱鬲賷 鬲賲 毓賲賱賴丕 賱賱賭Spooler %s 丕賱賶 %s, 丕賱賭spooler "
-"丕賱丨丕賱賷. 賰賱 亘賷丕賳丕鬲 丕賱鬲賴賷卅丞 (丕爻賲 丕賱胤丕亘毓丞, 丕賱賵氐賮, 丕賱賲賰丕賳, 賳賵毓 丕賱賵氐賱丞, 賵 禺賷丕乇丕鬲 "
-"丕賱廿毓丿丕丿 丕賱廿賮鬲乇丕囟賷) 賷鬲賲 兀禺匕賴丕, 賱賰賳 賱賳 賷鬲賲 賳賯賱 丕賱賵馗丕卅賮.\n"
-"賱丕 賷賲賰賳 賳賯賱 賰賱 丕賱氐賮賵賮 賱賱兀爻亘丕亘 丕賱鬲丕賱賷丞:\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "丕匕丕 賰丕賳 丕賱賭FPU 賱丿賷賴 賲鬲噩賴 IRQ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"鬲賲 鬲賴賷卅丞 丕賱胤丕亘毓丞 丌賱賷丕賸 賱賰賷 鬲毓胤賷賰 丕賱賯丿乇丞 毓賱賶 丕賱賵氐賵賱 丕賱賶 爻賵丕賯丕鬲 亘胤丕賯丕鬲 丕賱氐賵乇 "
-"毓賱賶 噩賴丕夭賰 丕賱卮禺氐賷. 賷賲賰賳賰 丕賱丌賳 丕賱賵氐賵賱 丕賱賶 亘胤丕賯丕鬲 丕賱氐賵乇 亘丕爻鬲禺丿丕賲 丕賱亘乇賳丕賲噩 "
-"丕賱乇爻賵賲賷 \"MToolsFM\" (丕賱賯丕卅賲丞: \"鬲胤亘賷賯丕鬲\" -> \"兀丿賵丕鬲 丕賱賲賱賮丕鬲\" -> \"賲丿賷乇 "
-"賲賱賮丕鬲 MTools\") 兀賵 亘丕爻鬲禺丿丕賲 兀丿賵丕鬲 \"mtools\" 賮賷 爻胤乇 丕賱兀賵丕賲乇 (兀丿禺賱 \"man "
-"mtools\" 賮賷 爻胤乇 丕賱兀賵丕賲乇 賱賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲). 賷賲賰賳賰 丕賷噩丕丿 賳馗丕賲 賲賱賮丕鬲 丕賱亘胤丕賯丞 "
-"鬲丨鬲 丨乇賮 丕賱爻賵丕賯丞 \"p:\", 兀賵 丨乇賵賮 丕賱爻賵丕賯丕鬲 丕賱兀禺乇賶 丕匕丕 賰丕賳鬲 賱丿賷賰 兀賰孬乇 賲賳 胤丕亘毓丞 "
-"HP 賲毓 爻賵丕賯丕鬲 亘胤丕賯丕鬲 氐賵乇. 賮賷 \"MToolsFM\" 賷賲賰賳賰 丕賱鬲丨賵賷賱 亘賷賳 丨乇賵賮 丕賱爻賵丕賯丕鬲 毓賱賶 "
-"丕賱丨賯賱 丕賱賲賵噩賵丿 賮賷 丕賱乇賰賳 丕賱兀賷爻乇 丕賱賶 丕賱兀毓賱賶 賮賷 賯賵丕卅賲 丕賱賲賱賮丕鬲."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Expand Tree"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"丕賱噩賴丕夭 丕賱賲鬲毓丿丿 丕賱賵馗丕卅賮 丕賱禺丕氐 亘賰 鬲賲 鬲賴賷卅鬲賴 丌賱賷丕賸 賱賷鬲賲賰賳 賲賳 丕賱賲爻丨 丕賱囟賵卅賷. 賷賲賰賳賰 "
-"丕賱丌賳 丕爻鬲禺丿丕賲 丕賱賲爻禺 丕賱囟賵卅賷 亘丕爻鬲禺丿丕賲 \"scanimage\" (\"scanimage -d hp:%s\" "
-"賱鬲丨丿賷丿 丕賱賲丕爻丨 丕賱囟賵卅賷 丕匕丕 賰丕賳 賱丿賷賰 兀賰孬乇 賲賳 賵丕丨丿) 賲賳 爻胤乇 丕賱兀賵丕賲乇 兀賵 亘丕賱亘乇丕賲噩 "
-"丕賱乇爻賵賲賷丞 \"xscanimage\" 兀賵 \"xsane\". 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 GIMP, 賷賲賰賳賰 兀賷囟丕賸 丕賱賲爻丨 "
-"丕賱囟賵卅賷 亘丕爻鬲禺丿丕賲 丕賱賯賵丕卅賲 \"File\"/\"Acquire\". 卮睾賱 丕賱兀賲乇 \"man scanimage\" 賮賷 "
-"爻胤乇 丕賱兀賵丕賲乇 賱賱丨氐賵賱 毓賱賶 賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲.\n"
+"賲卮睾賱 \"%s\" 丕賱賯丿賷賲 毓賱賶 丕賱賯丕卅賲丞 丕賱爻賵丿丕亍.\n"
"\n"
-"賱丕 鬲爻鬲禺丿賲 \"scannerdrake\" 賱賴匕丕 丕賱噩賴丕夭!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "噩丕乇賷 胤亘丕毓丞 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞..."
+"賮賷 亘毓囟 丕賱丨丕賱丕鬲 賯賷賱 兀賳賴 賷爻亘亘 丕賳賴賷丕乇 賮賷 丕賱賳賵丕丞 毓賳丿 丕夭丕賱丞 丕賱鬲丨賲賷賱.\n"
+"\n"
+"賲卮睾賱 \"%s\" 丕賱噩丿賷丿 爻賷鬲賲 丕爻鬲禺丿丕賲賴 毓賳丿 鬲卮睾賷賱 丕賱噩賴丕夭 賮賷 丕賱賲乇丞 丕賱賯丕丿賲丞."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Print option list"
-msgstr "賯丕卅賲丞 禺賷丕乇丕鬲 丕賱胤丕亘毓丞"
+msgid "Expert Mode"
+msgstr "賵囟毓賷丞 丕賱禺亘賷乇"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "噩丕乇賷 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丞 \"%s\""
+msgid "Printer options"
+msgstr "禺賷丕乇丕鬲 丕賱胤丕亘毓丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Printing/Photo Card Access on \"%s\""
+msgid "Local Network adress"
+msgstr "毓賳賵丕賳 丕賱卮亘賰丞 丕賱賲丨賱賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "噩丕乇賷 丕賱胤亘丕毓丞/丕賱賲爻丨 毓賱賶 \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲: (丿賱賷賱 /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Printing/Scanning/Photo Cards on \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"賱賱賲毓乇賮丞 丨賵賱 丕賱禺賷丕乇丕鬲 丕賱賲鬲賵賮乇丞 賱賱胤丕亘毓丞 丕賱丨丕賱賷丞, 廿賲丕 兀賳 鬲賯乇兀 丕賱賯丕卅賲丞 兀丿賳丕賴 賵 "
-"丕賳賯乇 \"賯丕卅賲丞 禺賷丕乇丕鬲 丕賱胤丕亘毓丞\".%s%s\n"
+"鬲爻鬲胤賷毓 丕賱丌賳 鬲賳夭賷賱 丕賱丨夭賲 丕賱賲丨丿賾孬丞. 賴匕賴 丕賱丨夭賲\n"
+"鬲賲 鬲丨丿賷孬賴丕 亘毓丿 丕氐丿丕乇 丕賱鬲賵夭賷毓丞. 賯丿\n"
+"鬲丨鬲賵賷 毓賱賶 丕氐賱丕丨丕鬲 兀賲賳賷丞 兀賵 丕氐賱丕丨丕鬲 賱毓賷賵亘 亘乇賲噩賷丞.\n"
+"\n"
+"賱鬲賳夭賷賱 賴匕賴 丕賱丨夭賲, 鬲丨鬲丕噩 丕賱賶 兀賳 鬲賰賵賳 賱丿賷賰 丕鬲氐丕賱 \n"
+"亘丕賱廿賳鬲乇賳鬲.\n"
"\n"
+"賴賱 鬲乇賷丿 鬲賳夭賷賱 賴匕賴 丕賱鬲丨丿賷孬丕鬲 責"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "禺丕丿賲 Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"丕賱兀賵丕賲乇 \"%s\" 賵 \"%s\" 鬲爻賲丨 賱賰 亘鬲毓丿賷賱 丕毓丿丕丿丕鬲 丕賱禺賷丕乇丕鬲 賱賵馗賷賮丞 胤亘丕毓丞 賲丨丿丿丞. "
-"亘亘爻丕胤丞 賯賲 亘廿囟丕賮丞 丕賱廿毓丿丕丿 丕賱賲胤賱賵亘 丕賱賶 爻胤乇 丕賱丌賵丕賲乇, 賲孬丕賱 \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"賷賲賰賳賰 賰匕賱賰 丕爻鬲禺丿丕賲 丕賱亘乇賳丕賲噩 丕賱乇爻賵賲賷 \"xpdq\" 賱鬲毓賷賷賳 丕賱禺賷丕乇丕鬲 賵 丕賱鬲毓丕賲賱 賲毓 "
-"賵馗丕卅賮 丕賱胤亘丕毓丞.\n"
-"丕匕丕 賰賳鬲 鬲爻鬲毓賲亘 賰賷丿賷 賰亘賷卅丞 爻胤丨 賲賰鬲亘 賮賱丿賷賰 兀賷賯賵賳丞 \"賱賱胤賵丕乇卅\", 丕爻賲賴丕 \"STOP "
-"Printer!\", 鬲賯賵賲 亘廿賷賯丕賮 賰賱 賵馗丕卅賮 丕賱胤亘丕毓丞 賮賵乇丕賸 毓賳丿 丕賱賳賯乇 毓賱賷賴丕. 賴匕丕 丕賱賲孬丕賱 "
-"賲賮賷丿 賱賱丨丕賱丕鬲 丕賱鬲賷 賷丨氐賱 賮賷賴丕 鬲毓孬乇 賮賷 丕爻鬲禺丿丕賲 丕賱賵乇賯.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australian Optus cable TV"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"賷賲賰賳賰 丕爻鬲禺丿丕賲 賴匕丕 丕賱兀賲乇 兀賷囟丕賸 賮賷 丨賯賱 \"兀賲乇 丕賱胤亘丕毓丞\" 賮賷 賲乇亘毓丕鬲 丨賵丕乇 丕賱胤丕亘毓丞 "
-"賮賷 丕賱毓丿賷丿 賲賳 丕賱鬲胤亘賷賯丕鬲. 賱賰賳 賴賳丕 賱丕 鬲賯賲 亘廿毓胤丕亍 丕爻賲 丕賱賲賱賮 賱兀賳 賲賱賮 丕賱胤亘丕毓丞 賷鬲賲 "
-"鬲賵賮賷乇賴 毓賳 胤乇賷賯 丕賱鬲胤亘賷賯.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr "賱胤亘丕毓丞 賲賱賮 賲賳 爻胤乇 丕賱兀賵丕賲乇 丕爻鬲禺丿賲 丕賱兀賲乇 \"%s <file> 兀賵 \"%s <file>\".\n"
+msgid "Subnet:"
+msgstr "Subnet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"賱賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘丕賱禺賷丕乇丕鬲 丕賱賲鬲賵賮乇丞 賱賱胤丕亘毓丞 丕賱賲禺鬲丕乇丞 丕囟睾胤 毓賱賶 夭乇 \"賯丕卅賲丞 "
-"禺賷丕乇丕鬲 丕賱胤丕亘毓丞\"."
+msgid "Zimbabwe"
+msgstr "夭賷賲亘丕亘賵賷"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"丕賱兀賲乇 \"%s\" 賷爻賲丨 賱賰 賰匕賱賰 賷鬲毓丿賷賱 丕毓丿丕丿丕鬲 丕賱禺賷丕乇丕鬲 賱賵馗賷賮丞 胤亘丕毓丞 賲丨丿丿丞. 亘賰賱 "
-"亘爻丕胤丞 兀囟賮 丕賱廿毓丿丕丿 丕賱賲胤賱賵亘 丕賱賶 爻胤乇 丕賱丌賵丕賲乇, 賲孬丕賱 \"%s <file>\". "
+msgid "Please enter the host name or IP."
+msgstr "賮囟賱丕 兀丿禺賱 丕爻賲 丕賱賲爻鬲囟賷賮 兀賵 毓賳賵丕賳 IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr "賱胤亘丕毓丞 賲賱賮 賲賳 爻胤乇 丕賱兀賵丕賲乇 丕爻鬲禺丿丕賲 丕賱兀賲乇 \"%s <file>\".\n"
+msgid "When"
+msgstr "賲鬲賶 "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "禺丕丿賲 DNS 丕賱孬丕賳賷 (丕禺鬲賷丕乇賷)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "賮賳賱賳丿丕"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"賴匕賴 賯丕卅賲丞 亘丕賱禺賷丕乇丕鬲 丕賱賲鬲賵賮乇丞 賱賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丞 丕賱丨丕賱賷丞:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"賷賲賰賳賰 丕爻鬲禺丿丕賲 賴匕賴 丕賱兀賵丕賲乇 兀賷囟丕賸 賮賷 丨賯賱 \"兀賲乇 丕賱胤亘丕毓丞\" 賮賷 賲乇亘毓丕鬲 丨賵丕乇 丕賱胤亘丕毓丞 "
-"賮賷 丕賱毓丿賷丿 賲賳 丕賱鬲胤亘賷賯丕鬲, 賱賰賳 賱丕 鬲賯賲 賴賳丕 亘廿毓胤丕亍 丕爻賲 丕賱賲賱賮 賱兀賳 丕賱賲賱賮 丕賱賲胤賱賵亘 "
-"胤亘丕毓鬲賴 賷鬲賲 丕毓胤丕丐賴 賲賳 賯亘賱 丕賱鬲胤亘賷賯.\n"
+msgid "Color depth: %s\n"
+msgstr "毓賲賯 丕賱兀賱賵丕賳: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"賱胤亘丕毓丞 賲賱賮 賲賳 爻胤乇 丕賱兀賵丕賲乇 賷賲賰賳賰 兀賳 鬲爻鬲禺丿賲 丕賱兀賲乇 \"%s <file>\" 兀賵 兀賳 鬲爻鬲禺丿賲 "
-"兀丿丕丞 胤亘丕毓丞 乇爻賵賲賷丞: \"xpp <file>\" 兀賵 \"kprinter <file>\". 丕賱兀丿賵丕鬲 丕賱乇爻賵賲賷丞 "
-"鬲爻賲丨 賱賰 亘丕禺鬲賷丕乇 丕賱胤丕亘毓丕鬲 賵 鬲毓丿賷賱 禺賷丕乇丕鬲賴丕 亘爻賴賵賱丞.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "賱丕 賷賲賰賳賰 丕夭丕賱丞 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲丞. 賷噩亘 鬲乇賯賷鬲賴丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "賴賱 毓賲賱鬲 亘丕賱卮賰賱 丕賱氐丨賷丨責"
+msgid "Loading from floppy"
+msgstr "噩丕乇賷 丕賱鬲丨賲賷賱 賲賳 丕賱賯乇氐 丕賱賲乇賳"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"鬲賲 丕乇爻丕賱 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞 丕賱賶 丕賱胤丕亘毓丞.\n"
-"賯丿 賷爻鬲睾乇賯 賴匕丕 亘毓囟 丕賱賵賯鬲 丨鬲賶 鬲亘丿兀 丕賱胤丕亘毓丞.\n"
+"賷購爻鬲禺丿賲 Drakperm 賱丕爻鬲毓乇丕囟 丕賱賲賱賮丕鬲 丕賱鬲賷 賷鬲賲 丕爻鬲禺丿丕賲賴丕 賱鬲毓丿賷賱 丕賱氐賱丕丨賷丕鬲, 賵 "
+"丕賱賲賱丕賰 賵 丕賱賲爻鬲禺丿賲賷賳 亘丕爻鬲禺丿丕賲 msec.\n"
+"賷賲賰賳賰 賰匕賱賰 鬲丨乇賷乇 賯賵丕毓丿賰 丕賱禺丕氐丞 丕賱鬲賷 爻鬲購賰鬲賻亘 賮賵賯 丕賱賯賵丕賴丿 丕賱廿賮鬲乇丕囟賷丞."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"鬲賲 丕乇爻丕賱 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞 丕賱賶 丕賱胤丕亘毓丞.\n"
-"賯丿 賷爻鬲睾乇賯 賴匕丕 亘毓囟 丕賱賵賯鬲 丨鬲賶 鬲亘丿兀 丕賱胤丕亘毓丞.\n"
-"丨丕賱丞 丕賱胤亘丕毓丞:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "賱丕 鬲胤亘毓 兀賷 氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
+msgid "Slovenia"
+msgstr "爻賱賵賮賷賳賷丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 賱氐賵乇丞"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"兀丿禺賱 賲爻鬲禺丿賲\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 亘丿賷賱丞 (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- 兀噩賴夭丞 PCI 賵 USB: 賴匕丕 賷毓乇囟 賯丕卅賲丞 丕賱賲氐賳毓賷賳 賵 丕賱兀噩賴夭丞 賵 丕賱賲氐賳毓賷賳 丕賱孬丕賳賵賷賷賳 賵 "
+"丕賱兀噩賴夭丞 丕賱孬丕賳賵賷丞 賱賴賵賷丕鬲 PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 亘丿賷賱丞 (Letter)"
+msgid "ProgressBar color selection"
+msgstr "廿禺鬲賷丕乇 賱賵賳 卮乇賷胤 丕賱鬲丨賲賷賱"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 賯賷丕爻賷丞"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"賴丕 賴賳丕 丕賱賲丿禺賱丕鬲 丕賱賲禺鬲賱賮丞.\n"
+"賷賲賰賳賰 丕囟丕賮丞 賲丿禺賱丕鬲 兀禺乇賶 兀賵 鬲睾賷賷乇 丕賱賲賵噩賵丿賷賳."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "廿胤亘毓"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "賱丕 氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"賮囟賱丕賸 丕禺鬲乇 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞 丕賱鬲賷 鬲賵丿 胤亘丕毓鬲賴丕.\n"
-"賲賱丨賵馗丞: 丕賱氐賮丨丞 丕賱廿禺鬲亘丕乇賷丞 賱氐賵乇丞 爻鬲爻鬲睾乇賯 賵賯鬲丕賸 胤賵賷賱丕賸 賱胤亘丕毓鬲賴丕 賵 毓賱賶 胤丕亘毓丕鬲 "
-"丕賱賱賷夭乇 亘賰賲賷丞 匕丕賰乇丞 賯賱賷賱丞 賯丿 賱丕 賷鬲賲 胤亘丕毓鬲賴丕 賲胤賱賯丕賸. 賮賷 兀睾賱亘 丕賱兀丨賷丕賳 賷賰賮賷 兀賳 "
-"鬲胤亘毓 丕賱氐賮丨丞 丕賱廿禺鬲亘丕乇賷丞 丕賱賯賷丕爻賷丞."
+"鬲卮睾賱 丕賱兀賵丕賲乇 丕賱賲購噩丿賵賱丞 毓賳 胤乇賷賯 兀賲乇 at 毓賳丿 丕賱賵賯鬲 丕賱賲丨丿丿\n"
+"賱鬲卮睾賷賱 at, 賵 鬲賯賵賲 亘鬲卮睾賷賱 丕賱兀賵丕賲乇 丕賱丿賯毓賷丞 毓賳丿賲丕 賷賰賵賳 賲鬲賵爻胤 丕賱鬲丨賲賷賱 賯賱賷賱丕賻."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
+msgid "Radio support:"
+msgstr "丿毓賲 丕賱乇丕丿賷賵:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"賴賱 鬲乇賷丿 鬲毓賷賷賳 賴匕賴 丕賱胤丕亘毓丞 (\"%s\")\n"
-"賰胤丕亘毓丞 丕賮鬲乇丕囟賷丞責"
+msgid "Installing SANE packages..."
+msgstr "噩丕乇賷 鬲孬亘賷鬲 丨夭賲 SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "丕賱禺賷丕乇 %s 禺丕乇噩 丕賱賲鬲賵爻胤!"
+msgid "boot disk creation"
+msgstr "氐賳毓 賯乇氐 賲乇賳 賱亘丿亍 丕賱賳馗丕賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "丕賱禺賷丕乇 %s 賷噩亘 兀賳 賷賰賵賳 乇賯賲丕賸!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "丕賱禺賷丕乇 %s 賷噩亘 兀賳 賷賰賵賳 乇賯賲丕 氐丨賷丨丕賸!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "丕毓丿丕丿丕鬲 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞"
+msgid "Change type"
+msgstr "睾賷賾乇 丕賱賳賵毓"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "鬲孬亘賷鬲 SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "丕爻鬲禺丿賲 CD/DVDROM 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"丕毓丿丕丿丕鬲 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞\n"
+"鬲賴丕賳賷賳丕, 丕賱鬲孬亘賷鬲 賯丿 丕賳鬲賴賶.\n"
+"丕丨匕賮 賵爻賷胤 丕賱廿賯賱丕毓 賵 丕囟睾胤 夭乇 丕丿禺賱 賱廿毓丕丿丞 丕賱鬲卮睾賷賱.\n"
"\n"
-"賷噩亘 毓賱賷賰 丕賱鬲兀賰丿 丕匕丕 賰丕賳 丨噩賲 丕賱氐賮丨丞 賵 賳賵毓 丕賱丨亘乇/賵囟毓 丕賱胤亘丕毓丞 (丕賳 賵噩丿) 亘丕賱廿囟丕賮丞 "
-"丕賱賶 丕毓丿丕丿丕鬲 丕賱毓鬲丕丿 賱胤丕亘毓丕鬲 丕賱賱賷夭乇 (丕賱匕丕賰乇丞, 賵丨丿丕鬲 丕賱丿賵亘賱賰爻, 丕賱賲賳氐丕鬲 "
-"丕賱廿囟丕賮賷丞) 賲毓丿賾丞 亘卮賰賱 氐丨賷丨. 賱丕丨馗 兀賳 噩賵丿丞 胤亘丕毓丞 毓丕賱賷丞 噩丿丕賸 賯丿 鬲噩賴賱 丕賱胤亘丕毓丞 亘胤賷卅丞."
+"\n"
+"賱賲毓賱賵賲丕鬲 丨賵賱 丕賱廿氐賱丕丨丕鬲 丕賱賲鬲賵賮乇丞 賱賴匕丕 丕賱廿氐丿丕乇 賲賳 Mandrake Linux,\n"
+"夭乇 氐賮丨丞 鬲氐丨賷丨 丕賱兀禺胤丕亍 丕賱賲鬲賵賮乇丞 賲賳:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"丕賱賲毓賱賵賲丕鬲 丨賵賱 鬲賴賷卅丞 丕賱賳馗丕賲 賲鬲賵賮乇丞 賮賷 賮氐賱\n"
+"賲丕 亘毓丿 丕賱鬲孬亘賷鬲 賮賷 丿賱賷賱 賲爻鬲禺丿賲 Mandrake 丕賱乇爻賲賷."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "paranoid"
+msgstr "賲乇鬲賮毓 亘噩賳賵賳"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "兀乇爻賱 鬲賯乇賷乇丕賸 亘乇賷丿賷丕賸 亘毓丿 賰賱 毓賲賱賷丞 賳爻禺 丕賱賶:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"賷賲賰賳賰 丕爻鬲禺丿丕賲 賴匕丕 丕賱兀賲乇 兀賷囟丕賸 賮賷 丨賯賱 \"兀賲乇 丕賱胤亘丕毓丞\" 賮賷 賲乇亘毓丕鬲 丨賵丕乇 丕賱胤丕亘毓丞 "
+"賮賷 丕賱毓丿賷丿 賲賳 丕賱鬲胤亘賷賯丕鬲. 賱賰賳 賴賳丕 賱丕 鬲賯賲 亘廿毓胤丕亍 丕爻賲 丕賱賲賱賮 賱兀賳 賲賱賮 丕賱胤亘丕毓丞 賷鬲賲 "
+"鬲賵賮賷乇賴 毓賳 胤乇賷賯 丕賱鬲胤亘賷賯.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "廿毓丿丕丿 Lexmark Inkjet"
+msgid "Resolution"
+msgstr "丿賯丞 丕賱毓乇囟"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"賲卮睾賱丕鬲 胤丕亘毓鬲賰 inkjet 丕賱鬲賷 鬲賲 鬲賵賮賷乇賴丕 賲賳 Lexmark 鬲丿毓賲 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賮賯胤, "
-"賱丕 賷丿毓賲 丕賱賲卮睾賱 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 兀賵 禺丕丿賲丕鬲 丕賱胤亘丕毓丞. 賮囟賱丕賸 賵氐賱 "
-"胤丕亘毓鬲賰 丕賱賶 賲賳賮匕 賲丨賱賷 兀賵 賯賲 亘鬲賴賷卅鬲賴丕 毓賱賶 丕賱賲丕賰賷賳丞 丕賱賲乇鬲亘胤丞 亘賴丕."
+"賱賱胤亘丕毓丞 丕賱賶 胤丕亘毓丞 SMB, 爻鬲丨鬲丕噩 丕賱賶 丕毓胤丕亍 丕爻賲 賲爻鬲囟賷賮 SMB (賲賱丨賵馗丞! 賯丿 賷賰賵賳 "
+"賲禺鬲賱賮丕賸 毓賳 丕爻賲 賲爻鬲囟賷賮 TCP/IP!) 賵 乇亘賲丕 毓賳賵丕賳 IP 丕賱禺丕氐 亘禺丕丿賲 丕賱胤丕亘毓丞, 丕囟丕賮丞 丕賱賶 "
+"丕爻賲 丕賱賲卮丕乇賰丞 賱胤丕亘毓丞 丕賱鬲賷 鬲賵丿 丕賱賵氐賵賱 丕賱賷賴丕 亘丕賱廿囟丕賮丞 丕賱賶 丕爻賲 賲爻鬲禺丿賲, 賰賱賲丞 "
+"賲乇賵乇, 賵 賲噩賲賵毓丞 毓賲賱 賲賳丕爻亘丞."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"兀賳鬲 鬲賯賵賲 亘鬲賴賷卅丞 胤丕亘毓丞 OKI laser winprinter. 賴匕賴 丕賱胤丕亘毓丕鬲\n"
-"鬲爻鬲禺丿賲 亘乇賵鬲賵賰賵賱 丕鬲氐丕賱丕鬲 禺丕氐 賵 賱匕丕 賮賴賷 鬲毓賲賱 賮賯胤 毓賳丿賲丕 鬲賰賵賳 賲鬲氐賱丞 亘丕賱賲賳賮匕 "
-"丕賱賲鬲賵丕夭賷 丕賱兀賵賱. 毓賳丿賲丕 鬲賰賵賳 丕賱胤丕亘毓丞 賲鬲氐賱丞 亘賲賳賮匕 丌禺乇 兀賵 亘禺丕丿賲 胤亘丕毓丞 賮賲賳 賮囟賱賰 "
-"賯賲 亘鬲賵氐賷賱 丕賱胤丕亘毓丞 丕賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 丕賱兀賵賱 賯亘賱 兀賳 鬲胤亘毓 氐賮丨丞 丕禺鬲亘丕乇賷丞. 丕賳 賱賲 "
-"鬲賮毓賱 匕賱賰 賮賱賳 鬲毓賲賱 丕賱胤丕亘毓丞. 丕毓丿丕丿 賳賵毓 丕賱賵氐賱丞 爻賷鬲賲 鬲噩丕賴賱賴 賲賳 丕賱賲卮睾賾賱."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "廿毓丿丕丿 OKI WinPrinter"
+msgid "reconfigure"
+msgstr "廿毓丿丕丞 丕賱廿毓丿丕丿"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"丕匕丕 賱賲 鬲賰賳 胤丕亘毓鬲 賲賵噩賵丿丞 賮賷 丕賱賯丕卅賲丞, 賮囟賱丕賸 丕禺鬲乇 胤丕亘毓丞 賲鬲賵丕賮賯丞 (丕賳馗乇 丿賱賷賱 "
-"丕賱胤丕亘毓丞) 兀賵 丕禺鬲乇 胤丕亘毓丞 賲賲丕孬賱丞."
+"賷賲賰賳 賱亘胤丕賯鬲賰 丕賱鬲賲鬲毓 亘丿毓賲 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿 賲毓 XFree %s, \n"
+"賱丕丨馗 兀賳 賴匕丕 丕賱丿毓賲 鬲噩乇賷亘賷 賵 賯丿 賷鬲爻亘亘 賮賷 丕賷賯丕賮 噩賴丕夭賰."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"賮囟賱丕賸 鬲兀賰丿 賲賳 賯賷丕賲 Printerdrake 亘丕賰鬲卮丕賮 胤乇丕夭 胤丕亘毓鬲賰 亘卮賰賱 氐丨賷丨. 丕毓孬乇 毓賱賶 "
-"丕賱胤乇丕夭 丕賱氐丨賷丨 丕匕丕 鬲賲 丕禺鬲賷丕乇 胤乇丕夭 禺胤兀 兀賵 \"胤丕亘毓丞 禺丕賲\"."
+msgid "Xinetd Service"
+msgstr "禺丿賲丕鬲 Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "賲丕 賴賵 賳賵毓 丕賱胤丕亘毓丞 賱丿賷賰責"
+msgid "access to network tools"
+msgstr "丕賱賵氐賵賱 丕賱賶 兀丿賵丕鬲 丕賱卮亘賰丞"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "廿禺鬲賷丕乇 賵丨丿丕鬲 丕賱胤丕亘毓丞"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "噩丕乇賷 賯乇丕亍丞 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 賷賲賰賾賳賰 賲賳 丕爻鬲禺丿丕賲 丌禺乇 丕氐丿丕乇丕鬲 丕賱亘乇丕賲噩 賱鬲卮睾賷賱 丕賱賲賱賮丕鬲 "
+"丕賱氐賵鬲賷丞, 賵 鬲丨乇賷乇 丕賱氐賵乇, 賵 鬲卮睾賷賱 賲賱賮丕鬲 丕賱賮賷丿賷賵"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "鬲賲 丕禺鬲賷丕乇 丕賱賳賾賲賵匕噩 賷丿賵賷賾賸丕"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "賴丕 賴賷 賯丕卅賲丞 亘賰賱 丕賱胤丕亘毓丕鬲 丕賱賲鬲丨賯賾賻賯 賲賳賴丕 丌賱賷丕賸. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "丕賱胤乇丕夭 氐丨賷丨"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"禺胤兀 兀孬賳丕亍 鬲孬亘賷鬲 aboot, \n"
+"丨丕賵賱 丕賱廿噩亘丕乇 毓賱賶 丕賱鬲孬亘賷鬲 丨鬲賶 賵 賱賵 兀丿賷 匕賱賰 賱鬲丿賲賷乇 丕賱鬲噩夭卅丞 丕賱兀賵賱賶責"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"賯丕賲 Printerdrake 亘賲賯丕乇賳丞 丕爻賲 丕賱胤乇丕夭 丕賱賳丕鬲噩 毓賳 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 賲毓 "
-"丕賱胤乇丕夭丕鬲 丕賱賲賵噩賵丿丞 賮賷 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲 賱賱丨氐賵賱 毓賱賶 兀賮囟賱 鬲賵丕賮賯. 賴匕丕 "
-"丕賱廿禺鬲賷丕乇 賯丿 賷賰賵賳 禺丕胤卅丕賸, 禺氐賵氐丕賸 丕匕丕 賰丕賳鬲 丕賱胤丕亘毓丞 睾賷乇 賲賵噩賵丿丞 丕胤賱丕賯丕賸 賮賷 賯丕毓丿丞 "
-"亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲. 賱匕丕 鬲兀賰丿 丕匕 賰丕賳 丕禺鬲賷丕乇賰 氐丨賷丨丕賸 賵 丕賳賯乇 \"丕賱胤乇丕夭 氐丨賷丨\", 兀賲丕 "
-"丕賳 賱賲 賷賰賳 丕賱胤丕夭 氐丨賷丨丕賸, 丕賳賯乇 \"丕禺鬲乇 丕賱胤乇丕夭 賷丿賵賷丕賸\" 賰賷 賷鬲爻賳賶 賱賰 丕禺鬲賷丕乇 胤乇丕夭 "
-"胤丕亘毓鬲賰 賷丿賵賷丕賸 毓賱賶 丕賱卮丕卮丞 丕賱鬲丕賱賷丞.\n"
+"options description:\n"
"\n"
-"賱胤丕亘毓鬲賰 賵噩丿 Printerdrake:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "胤乇丕夭 丕賱胤丕亘毓丞 丕賱禺丕氐丞 亘賰"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"丕爻鬲毓丿 丕賱賲賱賮丕鬲\n"
+"丕賱賲禺鬲丕乇丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "噩丕乇賷 鬲丨囟賷乇 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s 賲賵噩賵丿, 賴賱 鬲乇賷丿 丨匕賮賴責\n"
+"\n"
+"鬲丨匕賷乇: 丕匕丕 賯賲鬲 亘賴匕賴 丕賱毓賲賱賷丞 賲爻亘賯丕賸 睾丕賱亘丕賸\n"
+" 爻鬲丨鬲丕噩 丕賱賶 丨匕賮 丕賱賲丿禺賱 賲賳 authorized_keys 毓賱賶 丕賱禺丕丿賲."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "丕賱賲賰丕賳"
+msgid "Please fill or check the field below"
+msgstr "賮囟賱丕賸 丕賲賱兀 兀賵 兀卮賾乇 毓賱賶 丕賱丨賯賱 兀丿賳丕賴"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "丕賱賵氐賮"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "賴賱 鬲乇賷丿 丨賮馗 鬲毓丿賷賱丕鬲 /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "丕爻賲 丕賱胤丕亘毓丞"
+msgid "Boot Protocol"
+msgstr "亘乇賵鬲賵賰賵賱 丕賱廿賯賱丕毓"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"賰賱 胤丕亘毓丞 鬲丨鬲丕噩 丕賱賶 丕爻賲 (賲孬丕賱 \"printer\"). 丨賯賵賱 丕賱賵氐賮 賵 丕賱賲賰丕賳 賱賷爻 賲賳 "
-"丕賱囟乇賵乇賷 賲賱丐賴丕. 丕賳賴丕 賲噩乇丿 賲賱丕丨馗丕鬲 賱賱賲爻鬲禺丿賲賷賳."
+msgid "LVM-disks %s\n"
+msgstr "兀賯乇丕氐 LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "兀丿禺賱 丕爻賲 丕賱胤丕亘毓丞 賵 丕賱鬲毓賱賷賯丕鬲"
+msgid "The package %s is needed. Install it?"
+msgstr "丕賱丨夭賲丞 %s 賷噩亘 兀賳 鬲購孬亘賾鬲. 賴賱 鬲乇賷丿 鬲孬亘賷鬲賴丕責"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "噩丕乇賷 噩毓賱 賲賳賮匕 丕賱胤丕亘毓丞 賲鬲賵賮乇丕賸 賱賭CUPS..."
+msgid "On boot"
+msgstr "毓賳丿 丕賱廿賯賱丕毓"
-#: ../../printer/printerdrake.pm:1
+# U+200F (RTL mark) has been inserted after "Bus" so the display
+# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
+# and not "Bus: datadatadata xxxxxxxx"
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 丕賱噩賴丕夭 賵 鬲賴賷卅丞 HPOJ..."
+msgid "Bus identification"
+msgstr "賲毓乇賮 丕賱賭 Bus鈥"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "丕賱賵氐賵賱 丕賱賶 亘胤丕賯丞 丕賱匕丕賰乇丞 毓賱賶 噩賴丕夭 HP 賲鬲毓丿丿 丕賱賵馗丕卅賮"
+msgid "Please make a backup of your data first"
+msgstr "乇噩丕亍 賯賲 亘毓賲賱 賳爻禺丞 丕丨鬲賷丕胤賷丞 賲賳 亘賷丕賳丕鬲賰 兀賵賱丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "噩丕乇賷 丕賱賲爻丨 毓賱賶 噩賴丕夭 HP 賲鬲毓丿丿 丕賱賵馗丕卅賮"
+msgid "Vatican"
+msgstr "丕賱賮丕鬲賷賰丕賳"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "噩丕乇賷 鬲孬亘賷鬲 丨夭賲 mtools"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "賱丿賷賰 兀賰孬乇 賲賳 賯乇氐 氐賱亘, 賮賷 兀賷賴賲 鬲乇賷丿 鬲孬亘賷鬲 賱賷賳賰爻責"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "噩丕乇賷 鬲孬亘賷鬲 丨夭賲 SANE..."
+msgid "Boot ISO"
+msgstr "賲賱賮 ISO 丕賱廿賯賱丕毓"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "噩丕乇賷 鬲賴賷卅丞 丨夭賲丞 HPOJ..."
+msgid "Eritrea"
+msgstr "丕乇賷鬲乇賷丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"丕匕丕 賰丕賳鬲 胤丕亘毓鬲賰 噩賴丕夭丕賸 賲鬲毓丿丿 丕賱賵馗丕卅賮 賲賳 HP 兀賵 Sony (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 賲毓 賲丕爻丨 囟賵卅賷, Sony IPJ-V100) 兀賵 噩賴丕夭 HP PhotoSmart "
-"兀賵 HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "丕丨匕賮 丕賱賯丕卅賲丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "賷噩亘 丕丿禺丕賱 爻胤乇 兀賵丕賲乇"
+msgid "A customizable environment"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "爻胤乇 丕賱兀賵丕賲乇"
+msgid "Inuktitut"
+msgstr "丕賷賳賵賰鬲賷鬲賵鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"賴賳丕 賷賲賰賳賰 鬲丨丿賷丿 兀賷 兀賲乇 賴賱丕賲賷 賷賲賰賳 鬲丨賵賷賱 賵馗賷賮丞 丕賱胤亘丕毓丞 丕賱賷賴 亘丿賱丕賸 賲賳 丕乇爻丕賱賴丕 "
-"賲亘丕卮乇丞賸 丕賱賶 丕賱胤丕亘毓丞."
+msgid "Morocco"
+msgstr "丕賱賲睾乇亘"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "丨賵賱 丕賱賶 丕賱兀賲乇"
+msgid "Which printer model do you have?"
+msgstr "賲丕 賴賵 賳賵毓 丕賱胤丕亘毓丞 賱丿賷賰責"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "鬲賲 丕賰鬲卮丕賮 丕賱胤乇丕夭: %s %s"
+msgid "Add a new printer"
+msgstr "兀囟賮 胤丕亘毓丞 噩丿賷丿丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "賷噩亘 丕丿禺丕賱 URI 氐丕賱丨!"
+msgid " All of your selected data have been "
+msgstr " 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲禺鬲丕乇丞 鬲賲 "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI 噩賴丕夭 丕賱胤丕亘毓丞"
+msgid "<-- Delete"
+msgstr "<-- 丨匕賮"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"賷賲賰賳賰 鬲丨丿賷丿 丕賱賭URI 賲亘丕卮乇丞 賱賱賵氐賵賱 丕賱賶 丕賱胤丕亘毓丞. 丕賱賭URI 賷噩亘 兀賳 賷鬲賵丕賮賯 賲毓 "
-"賲鬲胤賱亘丕鬲 CUPS 兀賵 Foomatic. 賱丕丨胤 兀賳賴 賱賷爻鬲 賰賱 兀賳賵丕毓 丕賱賭URI 賲丿毓賵賲丞 賲賳 "
-"丕賱賭spoolers."
+msgid "Nepal"
+msgstr "賳賷亘丕賱"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "丕賱亘賵丕亘丞"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "丕爻賲 賲爻鬲囟賷賮 丕賱胤丕亘毓丞 兀賵 丕賱賭 IP"
+msgid "chunk size"
+msgstr "丨噩賲 chunk"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "賷噩亘 兀賳 賷賰賵賳 乇賯賲 丕賱賲賳賮匕 乇賯賲丕賸 氐丨賷丨丕賸!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "丕爻賲 賲爻鬲囟賷賮 丕賱胤丕亘毓丞 兀賵 丕賱賭 IP 賲賮賯賵丿!"
+msgid "Problems installing package %s"
+msgstr "賰丕賳鬲 賴賳丕賰 賲卮丕賰賱 賮賷 鬲孬亘賷鬲 丕賱丨夭賲丞 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"賱賱胤亘丕毓丞 丕賱賶 胤丕亘毓丞 TCP 兀賵 socket, 賷噩亘 毓賱賷賰 丕毓胤丕亍 丕爻賲 丕賱賲爻鬲囟賷賮 兀賵 毓賳賵丕賳 IP "
-"丕賱禺丕氐 亘丕賱胤丕亘毓丞 賵 丕禺鬲賷丕乇賷丕賸 賷賲賰賳賰 丕囟丕賮丞 乇賯賲 賲賳賮匕 丕賱胤丕亘毓丞 (丕賱廿賮鬲乇丕囟賷 賴賵 9100). "
-"毓賱賶 禺丕丿賲丕鬲 HP JetDirect 賷賰賵賳 乇賯賲 丕賱賲賳賮匕 毓丕丿丞賸 賴賵 9100, 毓賱賶 丕賱禺丕丿賲丕鬲 丕賱兀禺乇賶 "
-"賷賲賰賳 兀賳 賷賰賵賳 丕賱乇賯賲 睾賷乇 匕賱賰. 丕賱賯 賳馗乇丞 毓賱賶 丿賱賷賱 丕賱賲爻鬲禺丿賲 賱賱毓鬲丕丿 丕賱禺丕氐 亘賰."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "爻賵賮 鬲爻鬲賱賲 鬲賳亘賷賴丕 丕匕丕 賰丕賳 丕賱鬲丨賲賷賱 兀毓賱賶 賲賳 賴匕賴 丕賱賯賷賲丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"丕禺鬲乇 賵丕丨丿丞 賲賳 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲賲 丕賱鬲丨賯賯 賲賳賴丕 丌賱賷丕賸 賲賳 丕賱賯丕卅賲丞 兀賵 兀丿禺賱 丕爻賲 "
-"丕賱賲爻鬲囟賷賮 兀賵 乇賯賲 IP 賵 乇賯賲 丕賱賲賳賮匕 丕賱廿禺鬲賷丕乇賷 (丕賱廿賮鬲乇丕囟賷 賴賵 9100) 賮賷 丨賯賵賱 "
-"丕賱廿丿禺丕賱."
+"\n"
+"\n"
+"賱鬲爻賱賷賲 鬲賯乇賷乇 丕賱毓賷賵亘, 丕囟睾胤 毓賱賶 夭乇 鬲賯乇賷乇.\n"
+"爻賷賯賵賲 賴匕丕 亘賯鬲丨 賲鬲氐賮丨 賵賷亘 毓賱賶 丕賱氐賮丨丞 https://drakbug.mandrakesoft.com\n"
+" 丨賷孬 爻鬲噩丿 丕爻鬲賲丕乇丞 毓賱賷賰 賲賱丐賴丕. 丕賱賲毓賱賵賲丕鬲 丕賱賲匕賰乇丞 兀毓賱丕賴 爻賷鬲賲 賳賯賱賴丕\n"
+"丕賱賶 匕賱賰 丕賱禺丕丿賲\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 TCP/Socket"
+msgid "Add a scanner manually"
+msgstr "兀囟賮 賲丕爻丨 囟賵卅賷 賷丿賵賷丕賸"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "丕賱賲爻鬲囟賷賮 \"%s\", 丕賱賲賳賮匕 %s"
+msgid "Reload partition table"
+msgstr "廿毓丕丿丞 鬲丨賲賷賱 噩丿賵賱 丕賱鬲賯爻賷賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", 丕賱賲爻鬲囟賷賮 \"%s\", 丕賱賲賳賮匕 %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "賳毓賲, 兀乇賷丿 丿禺賵賱丕 丌賱賷丕 賲毓 賴匕丕 )丕賱賲爻鬲禺丿賲, 爻胤丨 丕賱賲賰鬲亘("
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "噩丕乇賷 賲爻丨 丕賱卮亘賰丞..."
+msgid "Search for fonts in installed list"
+msgstr "丕亘丨孬 毓賳 丕賱禺胤賵胤 賮賷 丕賱賯丕卅賲丞 丕賱賲孬亘鬲丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "鬲丨賯賯 丌賱賷 賲賳 丕賱胤丕亘毓丕鬲"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "丕賱卮亘賰丞 丕賱賲丨賱賷丞 賱賲 鬲賳鬲賴 亘賭`0', 噩丕乇賷 丕賱禺乇賵噩."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "丕爻賲 氐賮 NCP 賲賮賯賵丿!"
+msgid "Boot"
+msgstr "丕賱廿賯賱丕毓"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "丕爻賲 禺丕丿賲 NCP 賲賮賯賵丿!"
+msgid "Tuner type:"
+msgstr "賳賵毓 丕賱鬲賵賳乇:"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "丕爻賲 氐賮 丕賱胤丕亘毓丞"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"丕?賳, 丨丕賳 賵賯鬲 丕禺鬲賷丕乇 賳馗丕賲 丕賱胤亘丕毓丞 賱賳馗丕賲賰. 鬲賵賮乇 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶\n"
+"賳馗丕賲 胤亘丕毓丞 賵丕丨丿, 賱賰賳 Mandrake Linux 賷賵賮乇 賱賰 賳馗丕賲賷賳. 賰賱 賳馗丕賲 賲賳丕爻亘\n"
+"賱賳賵睾 賲毓賷賳 賲賳 丕賱鬲賴賷卅丞.\n"
+"\n"
+" * \"%s\"--賵 賴賵 丕禺鬲氐丕乇 賱賭``print, don't queue'' 兀賷 ``丕胤亘毓 賵 ? 鬲氐賮'', 賴匕丕 賴賵 "
+"丕賱禺賷丕乇 丕?賲孬賱\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 賵氐賱丞 賲亘丕卮乇丞 亘丕賱胤丕亘毓丞, 賵 鬲乇賷丿 鬲賮丕丿賷 兀賷 丕乇鬲亘丕賰 賮賷 丕賱胤丕亘毓丞\n"
+"賵 賱丿賷賰 胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰丞.(賷賯賵賲 \"pdq\" 亘丕賱鬲毓丕賲賱 賲毓 丨丕?鬲 丕賱卮亘賰丞 丕賱亘爻賷胤丞\n"
+"賵 賷毓賷亘賴 丕賱亘胤卅 毓賳丿 丕?爻鬲禺丿丕賲 賲毓 丕賱卮亘賰丕鬲). 賲賳 丕?賮囟賱 兀賳 鬲爻鬲禺丿賲 \"pdq\" 丕匕丕.\n"
+"賰丕賳鬲 賴匕賴 鬲噩乇亘鬲賰 丕?賵賱賶 賲毓 賳馗丕賲 賱賷賳賰爻.\n"
+"\n"
+" * \"%s\" - ``Common UNIX Printing System'', 賴賵 丕賱禺賷丕乇 丕?賲孬賱\n"
+"賱賱胤亘丕毓丞 毓賱賶 胤丕亘毓鬲賰 丕賱賲丨賱賷丞 兀賵 丨鬲賶 毓賱賶 胤丕亘毓丞 賮賷 丕賱賳氐賮 丕?禺乇 賲賳 丕賱賰賵賰亘. 丕賳賴\n"
+"爻賴賱 丕?毓丿丕丿 賵 賷賲賰賳 兀賳 賷鬲氐乇賮 賰禺丕丿賲 兀賵 賰毓賲賷賱 ?賳馗賲丞 胤亘丕毓丞 \"lpd\"\n"
+"丕賱賯丿賷賲丞, 賱匕丕 賮廿賳賴 賲鬲賵丕賮賯 賲毓 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕賱賯丿賷賲丞\n"
+"丕賱鬲賷 ? 鬲夭丕賱 鬲丨鬲丕噩 丕賱賶 禺丿賲丕鬲 丕賱胤亘丕毓丞.亘賷賳賲丕 丕賱鬲賴賷卅丞 爻賴賱丞\n"
+"賵 賯賵賷丞 賲孬賱 \"pdq\". 丕匕丕 賰賳鬲 鬲丨鬲丕噩 丕賱賶 賲丨丕賰丕丞 禺丕丿賲 \"lpd\", 鬲兀賰丿\n"
+"賲賳 鬲卮睾賷賱 賲乇丕賯亘 \"cups-lpd\". 賷丨鬲賵賷 %s 毓賱賶 賵丕噩賴丕鬲\n"
+"乇爻賵賲賷丞 賱賱胤亘丕毓丞 兀賵 丕禺鬲賷丕乇 禺賷丕乇丕鬲 丕賱胤丕亘毓丞 賵 廿丿丕乇丞\n"
+"丕賱胤丕亘毓丞.\n"
+"\n"
+"丕匕丕 賯賲鬲 賷鬲賯乇賷乇 丕禺鬲賷丕乇賰 丕?賳, 孬賲 賱賲 賷毓噩亘賰 賳馗丕賲 丕賱胤亘丕毓丞\n"
+"賮賷賲丕 亘毓丿, 賷賲賰賳賰 鬲睾賷賷乇賴 毓賳 胤乇賷賯 鬲卮睾賷賱 PrinterDrake 賲賳 賲乇賰夭 鬲丨賰賲 Mandrake\n"
+"賵 丕賱賳賯乇 毓賱賶 夭乇 丕賱禺亘賷乇."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "禺丕丿賲 丕賱胤丕亘毓丞"
+msgid "\"Menu\" key"
+msgstr "賲賮鬲丕丨 \"Menu\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"賱賱胤亘丕毓丞 毓賱賶 胤丕亘毓丞 NetWare, 鬲丨鬲丕噩 丕賱賶 丕毓胤丕亍 丕爻賲 禺丕丿賲 胤亘丕毓丞 NetWare (賱丕丨胤 兀賳賴 "
-"賯丿 賷禺鬲賱賮 毓賳 丕爻賲 賲爻鬲囟賷賮 TCP/IP!) 亘丕賱廿囟丕賮丞 丕賱賶 丕爻賲 丕賱氐賮 賱賱胤丕亘毓丞 丕賱鬲賷 乇睾亘 賮賷 "
-"丕賱賵氐賵賱 丕賱賷賴丕 亘丕賱廿囟丕賮丞 丕賱賶 丕爻賲 賲爻鬲禺丿賲 賵 賰賱賲丞 賲乇賵乇 賲賳丕爻亘鬲賷賳."
+"\n"
+"\n"
+"賮囟賱丕賸 鬲兀賰丿 賲賳 賯賷丕賲 Printerdrake 亘丕賰鬲卮丕賮 胤乇丕夭 胤丕亘毓鬲賰 亘卮賰賱 氐丨賷丨. 丕毓孬乇 毓賱賶 "
+"丕賱胤乇丕夭 丕賱氐丨賷丨 丕匕丕 鬲賲 丕禺鬲賷丕乇 胤乇丕夭 禺胤兀 兀賵 \"胤丕亘毓丞 禺丕賲\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 NetWare"
+msgid "Security Administrator:"
+msgstr "賲丿賷乇 丕賱兀賲賳:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "乇噩丕亍 兀丿禺賱 丕爻賲 丕賱丿禺賵賱"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr "if set to yes, check permissions of files in the users' home."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"賵氐賾賱 丕賱胤丕亘毓丞 丕賱賶 禺丕丿賲 賱賷賳賰爻 賵 丕噩毓賱 賲丕賰賷賳丕鬲 Windows 鬲鬲氐賱 亘賴 賰毓賲賱丕亍.\n"
-"\n"
-"賴賱 鬲乇賷丿 賮毓賱丕賸 賲鬲丕亘毓丞 丕毓丿丕丿 賴匕賴 丕賱胤丕亘毓丞 賰賲丕 鬲賮毓賱 丕賱丌賳責"
+"賱賷爻鬲 賱丿賷賰 兀賷 丕鬲氐丕賱丕鬲 廿賳鬲乇賳鬲.\n"
+"賯賲 亘毓賲賱 丕鬲氐丕賱 兀賵賱丕 亘丕爻鬲禺丿丕賲 '鬲賴賷卅丞'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "賳賯賱 丕賱禺胤賵胤"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "丌賱賷"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "賴賱 鬲乇賷丿 鬲噩乇亘丞 丕賱廿毓丿丕丿責"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"賯賲 亘廿毓丿丕丿 禺丕丿賲 Windows 賱噩毓賱 丕賱胤丕亘毓丕鬲 賲鬲賵賮乇丞 鬲丨鬲 亘乇賵鬲賵賰賵賱 IPP 賵 賯賲 亘廿毓丿丕丿 "
-"丕賱胤亘丕毓丞 賲賳 賴匕賴 丕賱賲丕賰賷賳丞 亘丕爻鬲禺丿丕賲 賳賵毓 丕賱賵氐賱丞 \"%s\" 賮賷 Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "鬲賲 丨匕賮 丕賱胤丕亘毓丞 \"%s\" 賲賳 Star Office/OpenOffice.org/GIMP 亘賳噩丕丨."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 丕賱胤亘丕毓丞 毓賱賶 丨爻丕亘 賮賷 Windows 賲毓 賰賱賲丞 賲乇賵乇. 亘爻亘亘 禺胤兀 賮賷 "
-"賴賷賰賱賷丞 毓賲賷賱 Samba, 賷鬲賲 賵囟毓 賰賱賲丞 丕賱賲乇賵乇 亘賳氐 賵丕囟丨 賮賷 爻胤乇 兀賵丕賲乇 毓賲賷賱 Samba "
-"丕賱賲爻鬲禺丿賲 賱賳賯賱 賵馗賷賮丞 丕賱胤亘丕毓丞 丕賱賶 禺丕丿賲 Windows. 賱匕丕 賮廿賳賴 賷賲賰賳 賱賰賱 賲爻鬲禺丿賲 毓賱賶 "
-"賴匕賴 丕賱賲丕賰賷賳丞 兀賳 賷毓乇囟 賰賱賲丞 丕賱賲乇賵乇 毓賱賶 丕賱卮丕卮丞 亘丕爻鬲禺丿丕賲 賰賱賲丕鬲 賲乇賵乇 賲孬賱 \"ps "
-"auxwww\".\n"
+"賯賷丕爻賷: 賴匕丕 賴賵 丕賱賲爻鬲賵賶 丕賱賯賷丕爻賷 丕賱賲賳氐賵丨 亘賴 賱賰賲亘賷賵鬲乇 賷賯賵賲 亘丕賱廿鬲氐丕賱\n"
+" 亘丕賱廿賳鬲乇賳鬲 賰毓賲賷賱.\n"
"\n"
-"賳丨賳 賳賳氐丨 亘丕爻鬲毓賲丕賱 賵丕丨丿 賲賳 丕賱亘丿丕卅賱 丕賱鬲丕賱賷丞 (賮賷 賰賱 丕賱丨丕?鬲 毓賱賷賰 丕賱鬲兀賰丿 兀賳 "
-"丕賱賲丕賰賷賳丕鬲 丕賱賲賵噩賵丿丞 賮賯胤 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞 鬲爻鬲胤賷毓 丕賱賵氐賵賱 丕賱賶 禺丕丿賲 Windows, 毓賳 "
-"胤乇賷賯 丕爻鬲禺丿丕賲 噩丿丕乇 賳丕乇賷 賲孬賱丕賸):\n"
+"賲乇鬲賮毓: 鬲賵噩丿 亘毓囟 丕賱賯賷賵丿 賲爻亘賯丕賸, 賵 亘毓囟 丕賱廿禺鬲亘丕乇丕鬲 賷鬲賲 鬲卮睾賷賱賴丕 丌賱賷丕賸 毓賳丿 賰賱 "
+"賱賷賱丞.\n"
"\n"
-"丕爻鬲禺丿賲 丨爻丕亘 丿賵賳 賰賱賲丞 賲乇賵乇 毓賱賶 禺丕丿賲 Windows, 賲孬賱 丨爻丕亘 \"GUEST\" 兀賵 丨爻丕亘 禺丕氐 "
-"賱丕爻鬲禺丿丕賲賴 賱賱胤亘丕毓丞. ? 鬲賯賲 亘廿夭丕賱丞 丕賱丨賲丕賷丞 毓賳 胤乇賷賯 賰賱賲丕鬲 丕賱賲乇賵乇 賲賳 丨爻丕亘賰 丕賱卮禺氐賷 "
-"兀賵 賲賳 丨爻丕亘 賲丿賷乇 丕賱賳馗丕賲.\n"
+"賲乇鬲賯毓 兀賰孬乇: 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 毓丕賱賺 亘卮賰賱 賰丕賮賺 賱丕爻鬲禺丿丕賲 丕賱賳馗丕賲 賰禺丕丿賲 賷爻鬲胤賷毓 兀賳 "
+"賷賯亘賱\n"
+" 丕賱廿鬲氐丕賱丕鬲 賲賳 毓賲賱丕亍 賰孬賷乇賷賳. 丕匕丕 賰丕賳 丨丕爻亘賰 賲噩乇丿 毓賲賷賱 毓賱賶 "
+"丕賱廿賳鬲乇賳鬲\n"
+"\t 賮賷噩亘 毓賱賷賰 丕禺鬲賷丕乇 賲爻鬲賵賶 兀賯賱.\n"
"\n"
-"賯賲 亘廿毓丿丕丿 禺丕丿賲 Windows 賱噩毓賱 丕賱胤丕亘毓丞 賲鬲賵賮乇丞 鬲丨鬲 亘乇賵鬲賵賰賵賱 LPD. 孬賲 賯賲 亘廿毓丿丕丿 "
-"丕賱胤亘丕毓丞 賲賳 賴匕賴 丕賱賲丕賰賷賳丞 賲毓 賳賵毓 丕賱賵氐賱丞 \"%s\" 賮賷 PrinterDrake.\n"
+"賲乇鬲賯毓 噩丿丕賸: 賴匕丕 賷賲丕孬賱 丕賱賲爻鬲賵賶 丕賱爻丕亘賯, 賱賰賳 丕賱賳馗丕賲 賮賷 賴匕賴 丕賱丨丕賱 賷賰賵賳 賲睾賱賯丕賸 賵 "
+"丕賱賲夭丕賷丕\n"
+" 丕賱兀賲賳賷丞 鬲賰賵賳 毓賱賶 兀賯氐賶 丨丿\n"
"\n"
+"賲丿賷乇 丕賱兀賲賳:\n"
+" 丕匕丕 賰丕賳 禺賷丕乇 '丕賱鬲賳亘賷賴丕鬲 丕賱兀賲賳賷丞' 賲禺鬲丕乇丕賸, 賮爻賷鬲賲 丕乇爻丕賱 鬲賳亘賷賴丕鬲 "
+"兀賲賳賷丞 丕賱賶 丕賱賲爻鬲禺丿賲 (亘廿爻賲 丕賱賲爻鬲禺丿賲\n"
+"\t 兀賵 丕賱亘乇賷丿 丕賱兀賱賰鬲乇賵賳賷)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "鬲丨匕賷乇 兀賲賳賷!"
+msgid "Save packages selection"
+msgstr "丕丨賮馗 丕禺鬲賷丕乇 丕賱丨夭賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "丕爻賲 賲卮丕乇賰丞 Samba 賲賮賯賵丿!"
+msgid "Remove the last item"
+msgstr "丕丨匕賮 丕賱賲丕丿丞 丕賱兀禺賷乇丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "賷噩亘 丕毓胤丕亍 丕爻賲 丕賱禺丕丿賲 兀賵 乇賯賲 IP 丕賱禺丕氐 亘丕賱禺丕丿賲!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "賯丕卅賲丞 丕賱賲爻鬲禺丿賲賷賳 丕賱匕賷賳 爻賷鬲賲 丕爻鬲毓丕丿鬲賴賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "鬲丨賯賯 丌賱賷"
+msgid "No net boot images created!"
+msgstr "賱賲 賷鬲賲 丕賳卮丕亍 氐賵乇 丕賯賱丕毓 毓亘乇 丕賱卮亘賰丞!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "賲噩賲賵毓丞 丕賱毓賲賱"
+msgid "use pptp"
+msgstr "丕爻鬲禺丿賲 pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "丕爻賲 丕賱賲卮丕乇賰丞"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "丕禺鬲乇 兀賷 禺丿賲丕鬲 鬲乇賷丿賴丕 兀賳 鬲亘丿兀 丌賱賷丕賸 毓賳丿 丕賱鬲孬亘賷鬲"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP 禺丕丿賲 SMB"
+msgid "Learn how to use this printer"
+msgstr "鬲毓賱賲 賰賷賮 鬲爻鬲禺丿賲 賴匕賴 丕賱胤丕亘毓丞"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "賲爻鬲囟賷賮 禺丕丿賲 SMB"
+msgid "Configure the network now"
+msgstr "賯賲 亘鬲賴賷卅丞 丕賱卮亘賰丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" 丕匕丕 鬲賲 丕賰鬲卮丕賮 丕賱胤丕亘毓丞 丕賱賲胤賱賵亘丞 丌賱賷丕賸, 賰賱 賲丕 毓賱賷賰 賴賵 丕禺鬲賷丕乇賴丕 賲賳 丕賱賯丕卅賲丞 孬賲 "
-"兀囟賮 丕爻賲 丕賱賲爻鬲禺丿賲, 賰賱賲丞 丕賱賲乇賵乇, 賵/兀賵 賲噩賲賵毓丞 丕賱毓賲賱 丕賳 丕丨鬲噩鬲 賱匕賱賰."
+msgid "Choose a mirror from which to get the packages"
+msgstr "丕禺鬲乇 賲乇丌丞 爻賷鬲賲 賲賳 禺賱丕賱賴丕 鬲賳夭賷賱 丕賱丨夭賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"賱賱胤亘丕毓丞 丕賱賶 胤丕亘毓丞 SMB, 爻鬲丨鬲丕噩 丕賱賶 丕毓胤丕亍 丕爻賲 賲爻鬲囟賷賮 SMB (賲賱丨賵馗丞! 賯丿 賷賰賵賳 "
-"賲禺鬲賱賮丕賸 毓賳 丕爻賲 賲爻鬲囟賷賮 TCP/IP!) 賵 乇亘賲丕 毓賳賵丕賳 IP 丕賱禺丕氐 亘禺丕丿賲 丕賱胤丕亘毓丞, 丕囟丕賮丞 丕賱賶 "
-"丕爻賲 丕賱賲卮丕乇賰丞 賱胤丕亘毓丞 丕賱鬲賷 鬲賵丿 丕賱賵氐賵賱 丕賱賷賴丕 亘丕賱廿囟丕賮丞 丕賱賶 丕爻賲 賲爻鬲禺丿賲, 賰賱賲丞 "
-"賲乇賵乇, 賵 賲噩賲賵毓丞 毓賲賱 賲賳丕爻亘丞."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "丕賱胤丕亘毓丞 \"%s\" 毓賱賶 丕賱禺丕丿賲 \"%s\""
+"賱賲 鬲鬲賲賰賳 兀丿丕丞 鬲睾賷賷乇 丨噩賲 FAT 賲賳 丕賱鬲毓丕賲賱 賲毓 鬲噩夭卅鬲賰, \n"
+"馗賴乇 丕賱禺胤兀 丕賱鬲丕賱賷: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", 丕賱胤丕亘毓丞 \"%s\" 毓賱賶 丕賱禺丕丿賲 \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "兀賷 賯胤丕毓 鬲乇賷丿 賳賯賱賴責"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "丕爻賲 丕賱胤丕亘毓丞 丕賱亘毓賷丿丞 賲賮賯賵丿!"
+msgid "Do you want to click on this button?"
+msgstr "Do you want to click on this button?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "丕爻賲 丕賱賲爻鬲囟賷賮 丕賱亘毓賷丿 賲賮賯賵丿!"
+msgid "Bahamas"
+msgstr "噩夭乇 丕賱亘丕賴丕賲丕"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "丕爻賲 丕賱胤丕亘毓丞 丕賱亘毓賷丿丞"
+msgid "Manual configuration"
+msgstr "鬲賴賷卅丞 賷丿賵賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "丕爻賲 丕賱賲爻鬲囟賷賮 丕賱亘毓賷丿"
+msgid "search"
+msgstr "亘丨孬"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"賱丕爻鬲禺丿丕賲 胤丕亘毓丞 lpd 亘毓賷丿丞, 毓賱賷賰 丕毓胤丕亍 丕爻賲 賲爻鬲囟賷賮 禺丕丿賲 丕賱胤丕亘毓丞 賵 丕爻賲 丕賱胤丕亘毓丞 "
-"毓賱賶 匕賱賰 丕賱禺丕丿賲."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 lpd 丕賱亘毓賷丿"
+"賴匕賴 丕賱丨夭賲丞 鬲賯賵賲 亘鬲丨賲賷賱 禺乇賷胤丞 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱賲禺鬲丕乇丞 賰賲丕\n"
+"鬲賲 鬲毓賷賷賳賴丕 賮賷 /etc/sysconfig/keyboard. 賷賲賰賳 丕禺鬲賷丕乇 賱賵禺丞 丕賱賲賮丕鬲賷丨 亘丕爻鬲禺丿丕賲 "
+"兀丿丕丞 kbdconfig.\n"
+"賷噩亘 鬲乇賰賴丕 賲賲賰賾賳丞 賮賷 兀睾賱亘 丕賱兀噩賴夭丞."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "鬲賴賷卅丞 賷丿賵賷丞"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (賲卮睾賱 毓乇囟 丕賱鬲孬亘賷鬲)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "賷噩亘 毓賱賷賰 丕丿禺丕賱/丕禺鬲賷丕乇 胤丕亘毓丞/噩賴丕夭"
+msgid "Zeroconf host name must not contain a ."
+msgstr "賷噩亘 兀賳 賷丨鬲賵賷 丕爻賲 賲爻鬲囟賷賮 Zeroconf 毓賱賶 ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (丕賱賲賳丕賮匕 丕賱賲鬲賵丕夭賷丞: /dev/lp0, /dev/lp1, ..., 賲賲丕卮賱 賱賭 LPT1:, LPT2:, ..., "
-"胤丕亘毓丞 USB 丕賱兀賵賱賷: /dev/usb/lp0, 胤丕亘毓丞 USB 丕賱孬丕賳賷丞: /dev/usb/lp1, ...)"
+"Syslog 賴賷 丕賱賵爻賷賱丞 丕賱鬲賷 鬲爻鬲禺丿賲賴丕 丕賱毓丿賷丿 賲賳 丕賱賲乇丕賯亘丕鬲 賱鬲爻噩賷賱 丕賱乇爻丕卅賱\n"
+"丕賱賶 賲賱賮丕鬲 爻噩賱丕鬲 毓丿賷丿丞. 丕賳賴丕 賮賰乇丞 噩賷丿丞 兀賳 鬲賯賵賲 丿丕卅賲丕賸 亘鬲卮睾賷賱 syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "乇噩丕亍 丕禺鬲乇 丕賱賲賳賮匕 丕賱賲賵氐賱丞 廿賱賷賴 胤丕亘毓鬲賰."
+msgid "Unknown/Others"
+msgstr "睾賷乇 賲毓乇賵賮/兀禺乇賶"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕賱賲賳賮匕 丕賱賲鬲氐賱丞 亘賴 丕賱胤丕亘毓丞 兀賵 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
+msgid "No TV Card detected!"
+msgstr "賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丞 鬲賱賮丕夭!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "禺賷丕乇丕鬲"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "乇噩丕亍 丕禺鬲乇 丕賱胤丕亘毓丞 丕賱鬲賷 爻鬲匕賴亘 丕賱賷賴丕 賵馗丕卅賮 丕賱胤亘丕毓丞."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "鬲賲 鬲毓賷賷賳 丕賱胤丕亘毓丞 \"%s\" 賰胤丕亘毓丞 丕賮鬲乇丕囟賷丞 丕賱丌賳."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕賱胤丕亘毓丞 丕賱鬲賷 鬲乇賷丿 丕毓丿丕丿賴丕. 丕毓丿丕丿 賴匕賴 丕賱胤丕亘毓丞 爻賷毓賲賱 丌賱賷丕賸. 丕賳 賱賲 賷鬲賲 "
-"丕賰鬲卮丕賮 丕賱胤丕亘毓丞 亘丕賱卮賰賱 丕賱氐丨賷丨 兀賵 丕匕丕 賰賳鬲 鬲賮囟賱 鬲賴賷卅丞 賷丿賵賷丞 卮睾賱 \"鬲賴賷卅丞 賷丿賵賷丞\"."
+"兀賳鬲 鬲賯賵賲 亘鬲賴賷卅丞 胤丕亘毓丞 OKI laser winprinter. 賴匕賴 丕賱胤丕亘毓丕鬲\n"
+"鬲爻鬲禺丿賲 亘乇賵鬲賵賰賵賱 丕鬲氐丕賱丕鬲 禺丕氐 賵 賱匕丕 賮賴賷 鬲毓賲賱 賮賯胤 毓賳丿賲丕 鬲賰賵賳 賲鬲氐賱丞 亘丕賱賲賳賮匕 "
+"丕賱賲鬲賵丕夭賷 丕賱兀賵賱. 毓賳丿賲丕 鬲賰賵賳 丕賱胤丕亘毓丞 賲鬲氐賱丞 亘賲賳賮匕 丌禺乇 兀賵 亘禺丕丿賲 胤亘丕毓丞 賮賲賳 賮囟賱賰 "
+"賯賲 亘鬲賵氐賷賱 丕賱胤丕亘毓丞 丕賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 丕賱兀賵賱 賯亘賱 兀賳 鬲胤亘毓 氐賮丨丞 丕禺鬲亘丕乇賷丞. 丕賳 賱賲 "
+"鬲賮毓賱 匕賱賰 賮賱賳 鬲毓賲賱 丕賱胤丕亘毓丞. 丕毓丿丕丿 賳賵毓 丕賱賵氐賱丞 爻賷鬲賲 鬲噩丕賴賱賴 賲賳 丕賱賲卮睾賾賱."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "賴丕 賴賷 賯丕卅賲丞 亘賰賱 丕賱胤丕亘毓丕鬲 丕賱賲鬲丨賯賾賻賯 賲賳賴丕 丌賱賷丕賸. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "噩賷賱 丕賱賲毓丕賱噩 (賲孬丕賱: 8 賱亘賳鬲賷賵賲 III, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "丨丕賱賷丕賸 賱丕 賷賵噩丿 丕丨鬲賲丕賱 亘丿賷賱"
+msgid "Auto-detected"
+msgstr "鬲丨賯賯 丌賱賷"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"丕毓丿丕丿 丕賱胤丕亘毓丞 爻賷毓賲賱 亘卮賰賱 丌賱賷. 丕匕丕 賱賲 賷鬲賲 丕賰鬲卮丕賮 胤丕亘毓鬲賰 亘丕賱卮賰賱 丕賱氐丨賷丨 兀賵 丕匕丕 "
-"賰賳鬲 鬲賮囟賱 丕毓丿丕丿 賲禺氐氐 卮睾賾賱 \"鬲賴賷卅丞 賷丿賵賷丞\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "鬲賲 丕賰鬲卮丕賮 丕賱胤丕亘毓丞 丕賱丌鬲賷丞 丌賱賷丕賸. "
+"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 噩賴丕夭賰 賱鬲孬亘賷鬲 禺丕丿賲 PXE 賰禺丕丿賲 DHCP\n"
+"賵 禺丕丿賲 TFTP 賱亘賳丕亍 禺丕丿賲 鬲孬亘賷鬲.\n"
+"亘丕爻鬲禺丿丕賲 賴匕賴 丕賱賲賷夭丞 鬲賰賵賳 丕賱丨賵丕爻賷亘 丕賱兀禺乇賶 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞 賯丕亘賱丞 賱賱鬲孬亘賷鬲 賲賳 "
+"賴匕丕 丕賱噩賴丕夭.\n"
+"\n"
+"鬲兀賰丿 賲賳 兀賳賰 賯賲鬲 亘鬲賴賷卅丞 丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 亘丕爻鬲禺丿丕賲 drakconnect 賯亘賱 丕賱賲鬲丕亘毓丞.\n"
+"\n"
+"賲賱丨賵馗丞: 鬲丨鬲丕噩 丕賱賶 賲賵丕卅賲 卮亘賰丞 賲禺氐氐 賱廿毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞 (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕賱胤丕亘毓丞 丕賱鬲賷 賷噩亘 兀賳 鬲匕賴亘 丕賱賷賴丕 賵馗丕卅賮 丕賱胤亘丕毓丞 兀賵 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 "
-"賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11519,1058 +11680,772 @@ msgid ""
msgstr ""
"賮囟賱丕賸 丕禺鬲乇 丕賱胤丕亘毓丞 丕賱鬲賷 鬲乇賷丿 丕毓丿丕丿賴丕 兀賵 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "亘丿賱丕賸 賲賳 匕賱賰, 賷賲賰賳賰 鬲丨丿賷丿 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯丕 丕賱廿丿禺丕賱"
+msgid "Refuse"
+msgstr "丕乇賮囟"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"丕匕丕 賱賲 鬲賰賳 賴匕賴 賴賷 丕賱鬲賷 鬲乇賷丿 鬲賴賷卅鬲賴丕, 兀丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 丕賱廿丿禺丕賱"
+"HardDrake 賷賯賵賲 亘丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿, 賵 賷賯賵賲 亘鬲賴賷卅丞 丕賱毓鬲丕丿\n"
+"丕賱噩丿賷丿/丕賱賲鬲睾賷乇 亘卮賰賱 丕禺鬲賷丕乇賷."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "丕賱胤丕亘毓丕鬲 丕賱賲鬲賵賮乇丞"
+msgid "Remote Printers"
+msgstr "丕賱胤丕亘毓丕鬲 丕賱亘毓賷丿丞"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "賱丕 鬲賵噩丿 胤丕亘毓丞!"
+msgid "Creating and formatting file %s"
+msgstr "噩丕乇賷 丕賳卮丕亍 賵 鬲噩賴賷夭 丕賱賲賱賮 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "賷噩亘 毓賱賷賰 丕丿禺丕賱 噩賴丕夭 兀賵 丕爻賲 賲賱賮!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "if set to yes, check additions/removals of sgid files."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"賱賲 賷鬲賲 丕賷噩丕丿 胤丕亘毓丞 賲丨賱賷丞! 賱鬲孬亘賷鬲 胤丕亘毓丞 賷丿賵賷丕賸 丕丿禺賱 丕爻賲 噩賴丕夭/丕爻賲 賲賱賮 賮賷 丨賯賱 "
-"丕賱廿丿禺丕賱 (丕賱胤丕亘毓丕鬲 丕賱賲鬲賵丕夭賷丞: /dev/lp0, /dev/lp1, ..., 賲賲丕孬賱丞 賱賭LPT1:, "
-"LPT2:, ..., 胤丕亘毓丞 USB 丕賱兀賵賱賶: /dev/usb/lp0, 胤丕亘毓丞 USB 丕賱孬丕賳賷丞: /dev/usb/"
-"lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "胤丕亘毓丞 賲丨賱賷丞"
+msgid "Choose an existing LVM to add to"
+msgstr "丕禺鬲乇 LVM l,噩賵丿 賱賱丕囟丕賮丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "胤丕亘毓丞 USB \\#%s"
+msgid "xfs restart"
+msgstr "xfs restart"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "丕賱胤丕亘毓丞 毓賱賶 丕賱賲賳賮匕 丕賱賲鬲賵丕夭賷 \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"丕賱胤丕亘毓丞 \"%s\" 賲賵噩賵丿丞 賲爻亘賯丕賸,\n"
+"賴賱 鬲乇賷丿 賮毓賱丕賸 丕賱賰鬲丕亘丞 賮賵賯 丕賱鬲賴賷卅丞 丕賱禺丕氐丞 亘賴丕責"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "丕賱胤丕亘毓丞 \"%s\" 毓賱賶 禺丕丿賲 SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "賱丕 鬲賵噩丿 鬲噩夭卅丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "胤丕亘毓丞 卮亘賰丞 \"%s\", 丕賱賲賳賮匕 %s"
+msgid "Use the scanners on hosts: "
+msgstr "丕爻鬲禺丿賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 丕賱賲爻鬲囟賷賮丕鬲: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "鬲賲 丕賱鬲丨賯賯 賲賳 %s"
+msgid "Unselected All"
+msgstr "鬲賲 丕夭丕賱丞 丕禺鬲賷丕乇 丕賱賰賱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", 丕賱胤丕亘毓丞 \"%s\" 毓賱賶 禺丕丿賲 SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Domain Name Resolver"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", 胤丕亘毓丞 卮亘賰丞 \"%s\", 丕賱賲賳賮匕 %s"
+msgid "Encryption key (again)"
+msgstr "賲賮丕鬲丨 丕賱鬲卮賮賷乇 (賲乇丞 兀禺乇賶)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"鬲賴丕賳賷賳丕, 鬲賲 鬲孬亘賷鬲 賵 鬲賴賷卅丞 胤丕亘毓鬲賰!\n"
-"\n"
-"賷賲賰賳賰 丕賱胤亘丕毓丞 亘丕爻鬲禺丿丕賲 兀賲乇 \"丕胤亘毓\" 賮賷 鬲胤亘賷賯丕鬲賰 (毓丕丿丞 賮賷 賯丕卅賲丞 \"賲賱賮\").\n"
-"\n"
-"丕匕丕 兀乇丿鬲 丕囟丕賮丞 兀賵 丨匕賮 兀賵 丕毓丕丿丞 鬲爻賲賷丞 胤丕亘毓丞, 兀丞 丕匕丕 兀乇丿鬲 鬲睾賷賷乇 禺賷丕乇丕鬲 丕賱胤丕亘毓丞 "
-"丕賱廿賮鬲乇丕囟賷丞 (噩賵丿丞 丕賱胤亘丕毓丞, 鬲睾賷賷乇 丕賱丨亘乇, ...), 丕禺鬲乇 \"丕賱胤丕亘毓丞\" 賮賷 賯爻賲 \"丕賱毓鬲丕丿"
-"\" 賮賷 賲乇賰夭 鬲丨賰賲 Mandrake."
+msgid "Samba share name missing!"
+msgstr "丕爻賲 賲卮丕乇賰丞 Samba 賲賮賯賵丿!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "鬲丨賯賾賯 丌賱賷丕賸 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賲丕賰賷賳丕鬲 鬲毓賲賱 毓賱賶 Microsoft Windows"
+msgid "True Type install done"
+msgstr "鬲賲 鬲孬亘賷鬲 禺胤賵胤 True Type"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "鬲丨賯賾賯 丌賱賷丕賸 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 賲亘丕卮乇丞賸 亘丕賱卮亘賰丞 丕賱賲丨賱賷丞"
+msgid "Detection in progress"
+msgstr "噩丕乇賷 丕賱鬲丨賯賯"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "鬲丨賯賯 兀賱賷丕 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲鬲氐賱丞 亘賴匕丕 丕賱噩賴丕夭"
+msgid "Build Whole Kernel -->"
+msgstr "丕亘賳賷 賰賱 丕賱賳賵丕丞 -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "兀賴賱丕 亘賰賲 賮賷 %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "賮囟賱丕賸 兀丿禺賱 賯乇氐 賵丨丿丕鬲 丕賱鬲丨丿賷孬 賮賷 丕賱爻賵丕賯丞 %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash!"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"丕賱胤丕亘毓丞 丕賱鬲丕賱賷丞\n"
"\n"
-"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
-"\n"
-"賴匕丕 丕賱賲毓丕賱噩 爻賷爻丕毓丿賰 毓賱賶 鬲孬亘賷鬲 丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕丕 丕賱賰賲亘賷賵鬲乇.\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 胤丕亘毓丞/胤丕亘毓丕鬲 賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞, 賮囟賱丕賸 賯賲 亘鬲賵氐賷賱賴丕 丕賱賶 賴匕丕 "
-"丕賱賰賲亘賷賵鬲乇 賵 賯賲 亘鬲卮睾賷賱賴丕 賰賷 賷鬲賲 丕賱鬲丨賯賯 賲賳賴丕/賲賳賴賲 丌賱賷丕賸.\n"
-"\n"
-" 丕賳賯乇 \"丕賱鬲丕賱賷\" 毓賳丿賲丕 鬲賰賵賳 賲爻鬲毓丿丕賸, 賵 毓賱賶 \"丕賱睾丕亍\" 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丿丕丿 "
-"丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱丌賳."
+"%s%s\n"
+"賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
-"賴匕丕 丕賱賲毓丕賱噩 爻賷爻丕毓丿賰 毓賱賶 鬲孬亘賷鬲 丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕丕 丕賱賰賲亘賷賵鬲乇 兀賵 "
-"丕賱賲賵氐賵賱丞 賲亘丕卮乇丞賸 亘丕賱卮亘賰丞.\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 胤丕亘毓丞/胤丕亘毓丕鬲 賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞, 賮囟賱丕賸 賯賲 亘鬲賵氐賷賱賴丕 丕賱賶 賴匕丕 "
-"丕賱賰賲亘賷賵鬲乇 賵 賯賲 亘鬲卮睾賷賱賴丕 賰賷 賷鬲賲 丕賱鬲丨賯賯 賲賳賴丕/賲賳賴賲 丌賱賷丕賸. 兀賷囟丕賸 賷噩亘 兀賳 鬲賰賵賳 胤丕亘毓丞/"
-"胤丕亘毓丕鬲 丕賱卮亘賰丞 賲賵氐賵賱丞 賵 賲卮睾賾賱丞.\n"
-"\n"
-"賱丕丨馗 兀賳 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰丞 賯丿 賷爻鬲睾乇賯 賵賯鬲丕賸 兀胤賵賱 賲賳 丕賱鬲丨賯賯 "
-"丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 賮賯胤. 賱匕丕 賯賲 亘鬲毓胤賷賱 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 "
-"胤丕亘毓丕鬲 丕賱卮亘賰丞 丕匕丕 賱賲 鬲賰賳 鬲丨鬲丕噩 丕賱賶 賴匕賴 丕賱賲賷夭丞.\n"
-"\n"
-" 丕賳賯乇 \"丕賱鬲丕賱賷\" 毓賳丿賲丕 鬲賰賵賳 賲爻鬲毓丿丕賸, 賵 毓賱賶 \"丕賱睾丕亍\" 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丿丕丿 "
-"丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱丌賳."
+msgid "Printer sharing on hosts/networks: "
+msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱賲爻鬲囟賷賮丕鬲/丕賱卮亘賰丕鬲: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
-"賴匕丕 丕賱賲毓丕賱噩 爻賷爻丕毓丿賰 毓賱賶 鬲孬亘賷鬲 丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕丕 丕賱賰賲亘賷賵鬲乇 兀賵 "
-"丕賱賲賵氐賵賱丞 賲亘丕卮乇丞賸 亘丕賱卮亘賰丞 兀賵 亘賲丕賰賷賳丞 Windows 亘毓賷丿丞.\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 胤丕亘毓丞/胤丕亘毓丕鬲 賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞, 賮囟賱丕賸 賯賲 亘鬲賵氐賷賱賴丕 丕賱賶 賴匕丕 "
-"丕賱賰賲亘賷賵鬲乇 賵 賯賲 亘鬲卮睾賷賱賴丕 賰賷 賷鬲賲 丕賱鬲丨賯賯 賲賳賴丕/賲賳賴賲 丌賱賷丕賸. 兀賷囟丕賸 賷噩亘 兀賳 鬲賰賵賳 胤丕亘毓丞/"
-"胤丕亘毓丕鬲 丕賱卮亘賰丞 賵 兀噩賴夭丞 Windows 賲賵氐賵賱丞 賵 賲卮睾賾賱丞.\n"
-"\n"
-"賱丕丨馗 兀賳 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰丞 賯丿 賷爻鬲睾乇賯 賵賯鬲丕賸 兀胤賵賱 賲賳 丕賱鬲丨賯賯 "
-"丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 賮賯胤. 賱匕丕 賯賲 亘鬲毓胤賷賱 丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 "
-"胤丕亘毓丕鬲 丕賱卮亘賰丞 賵/兀賵 丕賱胤丕亘毓丕鬲 丕賱賲爻鬲囟丕賮丞 賲賳 Windows 丕匕丕 賱賲 鬲賰賳 鬲丨鬲丕噩 丕賱賶 賴匕賴 "
-"丕賱賲賷夭丞.\n"
-"\n"
-" 丕賳賯乇 \"丕賱鬲丕賱賷\" 毓賳丿賲丕 鬲賰賵賳 賲爻鬲毓丿丕賸, 賵 毓賱賶 \"丕賱睾丕亍\" 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丿丕丿 "
-"丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱丌賳."
+"丕賱兀賲乇 \"%s\" 賷爻賲丨 賱賰 賰匕賱賰 賷鬲毓丿賷賱 丕毓丿丕丿丕鬲 丕賱禺賷丕乇丕鬲 賱賵馗賷賮丞 胤亘丕毓丞 賲丨丿丿丞. 亘賰賱 "
+"亘爻丕胤丞 兀囟賮 丕賱廿毓丿丕丿 丕賱賲胤賱賵亘 丕賱賶 爻胤乇 丕賱丌賵丕賲乇, 賲孬丕賱 \"%s <file>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
-"\n"
-"賴匕丕 丕賱賲毓丕賱噩 賷爻賲丨 賱賰 亘鬲孬亘賷鬲 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 兀賵 丕賱亘毓賷丿丞 賱賷鬲賲 丕爻鬲禺丿丕賲賴丕 賲賳 賴匕賴 "
-"丕賱賲丕賰賷賳賵 賵 賲賳 丕賱賲丕賰賷賳丕鬲 丕賱兀禺乇賶 毓賱賶 丕賱卮亘賰丞.\n"
-"\n"
-"賷爻兀賱賰 丕賱賲毓丕賱噩 毓賳 賰賱 丕賱賲毓賱賵賲丕鬲 丕賱兀爻丕爻賷丞 賱廿毓丿丕丿 丕賱胤丕亘毓丞 賵 鬲毓胤賷賰 丕賱賯丿乇丞 毓賱賶 "
-"丕賱賵氐賵賱 賱賰賱 賲卮睾賱丕鬲 丕賱胤丕亘毓丕鬲 賵 禺賷丕乇丕鬲 丕賱賲卮睾賱丕鬲 賵 兀賳賵丕毓 賵氐賱丕鬲 丕賱胤丕亘毓丞."
+"賮賷 亘毓囟 丕賱兀丨賷丕賳 賷丨鬲丕噩 賲卮睾賱 %s 賲毓賱賵賲丕鬲 丕囟丕賮賷丞 賱賰賷 賷毓賲賱\n"
+"亘卮賰賱 氐丨賷丨, 丕賱丕 兀賳賴 賷賲賰賳賴 丕賱毓賲賱 噩賷丿丕 亘丿賵賳賴丕. 賴賱 鬲乇賷丿 鬲丨丿賷丿\n"
+"禺賷丕乇丕鬲 丕囟丕賮賷丞 賱賴 兀賵 鬲爻賲丨 賱賱賲卮睾賱 亘丕賱鬲丨賯賯 賮賷 噩賴丕夭賰\n"
+"毓賳 丕賱賲毓賱賵賲丕鬲 丕賱鬲賷 爻賷丨鬲丕噩賴丕責 賮賷 亘毓囟 丕賱兀丨賷丕賳, 賯丿 賷鬲爻亘亘 丕賱鬲丨賯賯 賮賷 鬲毓賱賷賯 丕賱噩賴丕夭, "
+"賱賰賳\n"
+"賱丕 賷噩亘 兀賳 賷鬲爻亘亘 匕賱賰 賮賷 兀賷 賲卮丕賰賱."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "毓賱丕賲丞 丕賱賯乇氐 賱賷爻鬲 丕賱毓賱丕賲丞 丕賱氐丨賷丨丞. 毓賱丕賲丞 丕賱賯乇氐 賴賷 %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"兀賴賱丕 亘賰 賮賷 兀丿丕丞 賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲!\n"
"\n"
+"%s\n"
"\n"
-"賱賲 賷鬲賲賰賳 Printerdrake 賲賳 丕賱鬲毓乇賮 毓賱賶 胤乇丕夭 胤丕亘毓鬲賰 %s. 賮囟賱丕賸 丕禺鬲乇 丕賱胤乇丕夭 丕賱氐丨賷丨 "
-"賲賳 丕賱賯丕卅賲丞."
+"丕囟睾胤 毓賱賶 鬲賴賷卅丞 賱鬲卮睾賷賱 賲毓丕賱噩 丕賱廿毓丿丕丿."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "賰賵亘丕"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " 毓賱賶 "
+msgid "Searching for new printers..."
+msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 胤丕亘毓丕鬲 噩丿賷丿丞..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "亘賷賱賷夭"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "噩丕乇賷 廿毓丿丕丿 丕賱胤丕亘毓丞 ..."
+msgid " (multi-session)"
+msgstr " (賲鬲毓丿丿 丕賱噩賱爻丕鬲)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 胤丕亘毓丕鬲 噩丿賷丿丞..."
+msgid "Kernel Boot Timeout"
+msgstr "丕賱賵賯鬲 丕賱兀賯氐賶 賱廿賯賱丕毓 丕賱賳賵丕丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"賲賱丨賵馗丞: 丕毓鬲賲丕丿丕賸 毓賱賶 胤乇丕夭 丕賱胤丕亘毓丞 賵 賳馗丕賲 丕賱胤亘丕毓丞 賮爻賷鬲賲 鬲孬亘賷鬲 丨賵丕賱賷 %d "
-"賲賷睾丕亘丕賷鬲 賲賳 丕賱亘乇賲噩賷丕鬲 丕賱廿囟丕賮賷丞."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 鬲乇賷丿 鬲賳氐賷亘 丕賱胤亘丕毓丞 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞責\n"
+"賷賲賰賳 賱亘胤丕賯鬲賰 丕賱丨氐賵賱 毓賱賶 丿毓賲 賱賱鬲爻乇賷毓 孬賱丕孬賷 丕賱兀亘毓丕丿 賱賰賳 賮賯胤 賲毓 XFree %s.\n"
+"亘胤丕賯鬲賰 賲丿毓賵賲丞 毓賳 胤乇賷賯 XFree %s 丕賱鬲賷 賷賲賰賳 兀賳 鬲賰賵賳 賲丿毓賵賲丞 亘卮賱 兀賮囟賱 賮賷 丕賱賵囟毓 "
+"孬賳丕卅賷 丕賱兀亘毓丕丿."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲匕賰賵乇丞 兀毓賱丕賴責\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "毓孬乇 賲毓丕賱噩 丕賱鬲噩夭卅丞 賮賷 DrakX 毓賱賶 丕賱丨賱賵賱 丕賱鬲丕賱賷丞:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丕鬲 賮賷 丕賱卮亘賰丞 丕賱賲丨賱賷丞責\n"
+msgid "Hungarian"
+msgstr "丕賱賲噩乇賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲匕賰賵乇丞 兀毓賱丕賴 兀賲 毓賱賶 丕賱胤丕亘毓丕鬲 賮賷 丕賱卮亘賰丞 "
-"丕賱賲丨賱賷丞責\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (鬲兀賰丿 賲賳 兀賳 賰賱 丕賱胤丕亘毓丕鬲 賲賵氐賵賱丞 賵 鬲毓賲賱).\n"
+"丕禺鬲乇 賲賵賮乇 丕賱禺丿賲丞 丕賱禺丕氐 亘賰.\n"
+"丕賳 賱賲 賷賰賳 賲賵噩賵丿丕賸 賮賷 丕賱賯丕卅賲丞, 丕禺鬲乇 睾賷乇 賲賵噩賵丿."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "賱賲 賷鬲賲 丕賱毓孬賵乇 毓賱賶 胤丕亘毓丕鬲 賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賴匕賴 丕賱賲丕賰賷賳丞"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "鬲夭丕賲賳 賵賯鬲 丌賱賷 (亘丕爻鬲禺丿丕賲 NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"鬲賵噩丿 %d 胤丕亘毓丕鬲 睾賷乇 賲毓乇賵賮丞 賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
+msgid "8 MB"
+msgstr "8 賲賷睾丕亘丕賷鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"鬲賵噩丿 胤丕亘毓丞 睾賷乇 賲毓乇賵賮丞 賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
+msgid "LDAP Server"
+msgstr "禺丕丿賲 LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"丕賱胤丕亘毓丞 丕賱鬲丕賱賷丞\n"
-"\n"
-"%s%s\n"
-"賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
+"丿毓賲 PCMCIA 賲賴賲 賱丿毓賲 兀卮賷丕亍 賲孬賱 亘胤丕賯丕鬲 丕賱廿賷孬乇賳鬲 賵\n"
+"丕賱賲賵丿賲丕鬲 毓賱賶 丕賱兀噩賴夭丞 丕賱丿賮鬲乇賷丞. 賱賳 賷鬲賲 亘丿亍 賴匕賴 丕賱禺丿賲丞 丕賱丕 毓賳丿 鬲賴賷卅鬲賴丕 賱匕丕 賮賱丕 "
+"賲爻賰賱丞 毓賳丿 鬲卮睾賷賱賴\n"
+"毓賱賶 丕賱兀噩賴夭丞 丕賱鬲賷 賱丕 鬲丨鬲丕噩賴."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"丕賱胤丕亘毓丕鬲 丕賱鬲丕賱賷丞\n"
-"\n"
-"%s%s\n"
-"賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
+msgid "Choose your country"
+msgstr "廿禺鬲乇 亘賱丿賰"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"丕賱胤丕亘毓丕鬲 丕賱鬲丕賱賷丞\n"
"\n"
-"%s%s\n"
-"賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "賵 %d 胤丕亘毓丕鬲 睾賷乇 賲毓乇賵賮丞"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "賵 胤丕亘毓丞 睾賷乇 賲毓乇賵賮丞"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "噩丕乇賷 丕賱鬲兀賰丿 賲賳 賳馗丕賲賰..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "噩丕乇賷 丕毓丕丿丞 鬲卮睾賷賱 CUPS..."
+"-賲賱賮賾丕鬲 丕賱賳賾馗丕賲 :\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "賴匕丕 丕賱禺丕丿賲 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞 賲爻亘賯丕賸, 賱丕 賷賲賰賳 丕囟丕賮鬲賴 賲乇丞 兀禺乇賶.\n"
+msgid "Standalone Tools"
+msgstr "丕賱兀丿賵丕鬲 丕賱賲賳賮氐賱丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "兀賲孬賱丞 賱毓賳丕賵賷賳 IP 氐丨賷丨丞:\n"
+msgid "Where"
+msgstr "兀賷賳"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "毓賳賵丕賳 IP 丕賱賲丿購禺賱 睾賷乇 氐丨賷丨.\n"
+msgid "but not matching"
+msgstr "賱賰賳 賱賷爻 賲賵丕卅賲丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "IP 丕賱禺丕丿賲 賲賮賯賵丿!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr "賷賲賰賳賰 賴賳丕 丕禺鬲賷丕乇 賲卮睾賱 亘丿賷賱 (ALSA 兀賵 OSS) 賱亘胤丕賯丞 丕賱氐賵鬲 (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "噩丕乇賷 鬲賴賷卅丞 亘胤丕賯丕鬲 PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "兀丿禺賱 毓賳賵丕賳 IP 賵 賲賳賮匕 丕賱賲爻鬲囟賷賮 丕賱匕賷 鬲乇賷丿 丕爻鬲禺丿丕賲 胤丕亘毓丕鬲賴."
+msgid "kdesu missing"
+msgstr "kdesu missing"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "丕賱賵氐賵賱 丕賱賶 丕賱胤丕亘毓丕鬲 毓賱賶 禺丕丿賲丕鬲 CUPS 丕賱亘毓賷丿丞"
+msgid "Encryption key"
+msgstr "賲賮丕鬲丨 丕賱鬲卮賮賷乇"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "丕丨匕賮 丕賱禺丕丿賲 丕賱賲禺鬲丕乇"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "丨乇乇 丕賱禺丕丿賲 丕賱賲禺鬲丕乇"
+msgid "Christmas Island"
+msgstr "噩夭乇 丕賱賰乇賷爻賲丕爻"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "丕囟賮 禺丕丿賲"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "賮卮賱 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓. 馗賴乇 丕賱禺胤兀 丕賱鬲丕賱賷:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"兀丿禺賱 賴賳丕 禺丕丿賲丕鬲 CUPS 丕賱鬲賷 鬲乇賷丿 丕爻鬲禺丿丕賲 胤丕亘毓丕鬲賴丕. 鬲丨鬲丕噩 丕賱賶 毓賲賱 匕賱賰 賮賯胤 丕賳 賱賲 "
-"鬲賯賲 丕賱禺丕丿賲丕鬲 亘賳卮乇 賲毓賱賵賲丕鬲 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰 丕賱賲丨賱賷丞."
+msgid "EIDE/SCSI channel"
+msgstr "賯賳丕丞 EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "毓賳賵丕賳 IP 賱賱賲爻鬲囟賷賮/丕賱卮亘賰丞:"
+msgid "Set this printer as the default"
+msgstr "毓賷賾賳 賴匕賴 丕賱胤丕亘毓丞 賰胤丕亘毓丞 丕賮鬲乇丕囟賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "賴匕丕 丕賱賲爻鬲囟賷賮/丕賱卮亘賰丞 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞 賲爻亘賯丕賸, 賱丕 賷賲賰賳 丕囟丕賮鬲賴 賲乇丞 兀禺乇賶.\n"
+msgid "partition %s"
+msgstr "丕賱鬲噩夭卅丞 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "毓賳賵丕賳 IP 丕賱賲丿購禺賱 賱賱賲爻鬲囟賷賮/丕賱卮亘賰丞 睾賷乇 氐丨賷丨.\n"
+msgid "Paranoid"
+msgstr "賲乇鬲賮毓 噩丿丕"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "毓賳賵丕賳 IP 賱賱賲爻鬲囟賷賮/丕賱卮亘賰丞 賲賮賯賵丿."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "丕禺鬲乇 丕賱卮亘賰丞 兀賵 丕賱賲爻鬲囟賷賮 丕賱鬲賷 賷噩亘 兀賳 鬲賰賵賳 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賲鬲賵賮乇丞 賱賴:"
+msgid "<-- Del User"
+msgstr "<-- 丕丨匕賮 丕賱賲爻鬲禺丿賲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞"
+msgid "Location on the bus"
+msgstr "丕賱賲賰丕賳 毓賱賶 丕賱賭bus"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "丕丨匕賮 丕賱賲爻鬲囟賷賮/丕賱卮亘賰丞 丕賱賲禺鬲丕乇丞"
+msgid "No printer found!"
+msgstr "賱丕 鬲賵噩丿 胤丕亘毓丞!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "丨乇賾乇 丕賱賲爻鬲囟賷賮/丕賱卮亘賰丞 丕賱賲禺鬲丕乇丞"
+msgid "the vendor name of the device"
+msgstr "丕爻賲 賲氐賳賾毓 丕賱噩賴丕夭"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "兀囟賮 賲爻鬲囟賷賮/卮亘賰丞"
+msgid "Erase entire disk"
+msgstr "丕賲爻丨 賰賱 丕賱賯乇氐"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"賴匕賴 賴賷 丕賱賲丕賰賷賳丕鬲 賵 丕賱卮亘賰丕鬲 丕賱鬲賷 賷噩亘 兀賳 鬲賰賵賳 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賲鬲賵賮乇丞 賱賴丕:"
+msgid " (Default)"
+msgstr " (丕賮鬲乇丕囟賷)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"毓賳丿 鬲卮睾賷賱 賴匕丕 丕賱禺賷丕乇, 賮毓賳丿 賰賱 亘丿丕賷丞 鬲卮睾賷賱 賱賭CUPS 爻賷鬲賲 丕賱鬲兀賰丿 丌賱賷丕賸 賲賳 賲丕\n"
-"\n"
-"- 丕匕丕 賰丕賳 LPD/LPRng 賲孬亘鬲丕賸, 賱賳 鬲鬲賲 丕賱賰鬲丕亘丞 賮賵賯 /etc/printcap 毓賳 胤乇賷賯 CUPS\n"
-"\n"
-"- 丕匕丕 賰丕賳 /etc/cups/cupsd.conf 賲賮賯賵丿, 爻賷鬲賲 丕賳卮丕丐賴 賮賷 賴匕賴 丕賱丨丕賱\n"
-"\n"
-"- 丕匕丕 賰丕賳鬲 賲毓賱賵賲丕鬲 丕賱胤亘丕毓丞 賲賳卮賵乇丞, 兀賷 兀賳賴丕 賱丕 鬲丨鬲賵賷 \"localhost\" 賰廿爻賲 "
-"賱賱禺丕丿賲.\n"
+"Arguments: ()\n"
"\n"
-"丕匕丕 賰丕賳鬲 亘毓囟 賴匕賴 丕賱廿噩乇丕亍丕鬲 賯丿 鬲爻亘亘鬲 亘賲卮丕賰賱 賱賰, 毓胤賾賱 賴匕丕 丕賱禺賷丕乇, 賱賰賳 賮賷 賴匕賴 "
-"丕賱丨丕賱 毓賱賷賰 丕賱廿賳鬲亘丕賴 賱賴匕賴 丕賱賳賯丕胤."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "鬲氐丨賷丨 丌賱賷 賱鬲賴賷卅丞 CUPS"
+msgid "Automatic reconfiguration"
+msgstr "丕毓丿丕丞 鬲賴賷卅丞 丌賱賷丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "鬲睾賷賷乇 賳馗丕賲 丕賱胤亘丕毓丞"
+msgid "Receiving Speed:"
+msgstr "爻乇毓丞 丕賱廿爻鬲賯亘丕賱"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"賱賱賵氐賵賱 丕賱賶 丕賱胤丕亘毓丕鬲 毓賱賶 禺丕丿賲丕鬲 CUPS 丕賱亘毓賷丿丞 賮賷 卮亘賰鬲賰 丕賱賲丨賱賷丞 鬲丨鬲丕噩 賮賯胤 丕賱賶 "
-"鬲卮睾賷賱 禺賷丕乇 \"丕毓孬乇 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲鬲賵賮乇丞 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞\"; 爻鬲賯賵賲 "
-"禺丕丿賲丕鬲 CUPS 亘廿毓賱丕賲 賲丕賰賷賳鬲賰 毓賳 丕賱胤丕亘毓丕鬲 丕賱賲賵噩賵丿丞 賱丿賷賴丕. 賰丕賮丞 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲賲 "
-"丕賱鬲毓乇賮 毓賱賷賴丕 賲賳 賯賽亘賱 賲丕賰賷賳鬲賰 賲賵噩賵丿丞 賮賷 賯爻賲 \"丕賱胤丕亘毓丕鬲 丕賱亘毓賷丿丞\" 毓賱賶 賳丕賮匕丞 "
-"Printerdrake 丕賱乇卅賷爻賷丞. 丕匕丕 賱賲 鬲賰賳 禺丕丿賲丕鬲 CUPS 賮賷 卮亘賰鬲賰 丕賱賲丨賱賷丞, 賮毓賱賷賰 兀賳 "
-"鬲賯賵賲 亘廿丿禺丕賱 毓賳丕賵賷賳 IP 賵 兀乇賯丕賲 丕賱賲賳丕賮匕 (丕禺鬲賷丕乇賷) 賱賱丨氐賵賱 毓賱賶 賲毓賱賵賲丕鬲 丕賱胤丕亘毓丕鬲 "
-"賲賳 丕賱禺丕丿賲丕鬲."
+msgid "Turks and Caicos Islands"
+msgstr "噩夭乇 丕賱鬲乇賰 賵 丕賱賰丕賷賰賵爻"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "賵賱丕 卮卅"
+msgid "permissions"
+msgstr "丕賱鬲氐丕乇賷丨"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "禺丕丿賲丕鬲 CUPS 丕賱廿囟丕賮賷丞: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "賱丕 兀噩賴夭丞 亘毓賷丿丞"
+msgid "<- Previous"
+msgstr "<- 丕賱爻丕亘賯 "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "鬲賴賷卅丞 賲禺氐氐丞"
+msgid "Internet Connection Sharing configuration"
+msgstr "廿毓丿丕丿丕鬲 賲卮丕乇賰丞 廿鬲氐丕賱 丕賱廿賳鬲乇賳鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱賲爻鬲囟賷賮丕鬲/丕賱卮亘賰丕鬲: "
+msgid "Toggle between flat and group sorted"
+msgstr "Toggle between flat and group sorted"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "丕毓孬乇 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 丌賱賷丕賸"
+msgid "Themes"
+msgstr "丕賱爻賲丕鬲"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "丕賱胤丕亘毓丕鬲 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞 賲鬲賵賮乇丞 賱賱兀噩賴夭丞 丕賱兀禺乇賶"
+msgid "Options: %s"
+msgstr "丕賱禺賷丕乇丕鬲: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"賷賲賰賳賰 賰匕賱賰 兀賳 鬲賯乇乇 賴賳丕 丕匕丕 賰丕賳鬲 丕賱胤丕亘毓丕鬲 丕賱賲賵噩賵丿丞 毓賱賶 丕賱兀噩賴夭丞 丕賱亘毓賷丿丞 兀賳 "
-"鬲賰賵賳 賲鬲賵賮乇丞 丌賱賷丕賸 賱賴匕賴 丕賱賲丕賰賷賳丞."
+"兀賳鬲 鬲爻鬲禺丿賲 %s 賰賲丿賷乇 丕賯賱丕毓 丨丕賱賷丕.\n"
+"丕囟睾胤 毓賱賶 鬲賴賷卅丞 賱鬲卮睾賷賱 賲毓丕賱噩 丕賱廿毓丿丕丿"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"賴賳丕 賷賲賰賳賰 兀賳 鬲禺鬲丕乇 丕匕丕 賰丕賳 賷噩亘 賱賱胤丕亘毓丕鬲 丕賱賲鬲氐賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 兀賳 鬲賰賵賳 賲鬲賵賮乇丞 "
-"賱賱賲丕賰賷賳丕鬲 丕賱兀禺乇賶 毓賱賶 丕賱卮亘賰丞."
+msgid "OKI winprinter configuration"
+msgstr "廿毓丿丕丿 OKI WinPrinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "廿毓丿丕丿丕鬲 賲卮丕乇賰丞 胤丕亘毓丕鬲 CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "爻丕賳鬲 賴賷賱丕賳丞"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "丕賱鬲丨賯賯 丕賱丌賱賷 賲賳 丕賱胤丕亘毓丕鬲 (賲丨賱賷丞, TCP/Socket, 賵 SMB)"
+msgid "Security Level"
+msgstr "賲爻鬲賵賶 丕賱兀賲賳"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"亘毓囟 丕賱禺胤賵丕鬲 賱賲 賷鬲賲 鬲賰賲賱鬲賴丕.\n"
"\n"
-"賱丕 鬲丨鬲丕噩 丕賱賶 鬲賴賷卅丞 丕賱胤丕亘毓丕鬲 毓賱賶 禺丕丿賲丕鬲 CUPS 丕賱亘毓賷丿丞; 賴匕賴 丕賱賰丕亘毓丕鬲 賷賲賰賳 "
-"丕賰鬲卮賱賮賴丕 丌賱賷丕賸."
+"賴賱 鬲乇賷丿 丕賱禺乇賵噩 丕賱丌賳 賮毓賱丕賸責"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "賲丕 賴賷 胤乇賷賯丞 鬲賵氐賷賱 丕賱胤丕亘毓丞責"
+msgid "Sudan"
+msgstr "丕賱爻賵丿丕賳"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "丕禺鬲乇 賵氐賱丞 丕賱胤丕亘毓丞"
+msgid "Polish (qwertz layout)"
+msgstr "丕賱亘賵賱賳丿賷丞 (qwertz layout)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "爻賵乇賷丞"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Arguments: (val)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+msgid "Portuguese"
+msgstr "丕賱亘乇鬲睾丕賱賷丞"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "if set to yes, check additions/removals of sgid files."
+msgid "Loopback file name: "
+msgstr "丕爻賲 賲賱賮 Loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "if set to yes, check open ports."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "毓賳賵丕賳 禺丕丿賲 DNS 賷噩亘 兀賳 賷賰賵賳 毓賱賶 丕賱賳爻賯 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"if set, send the mail report to this email address else send it to root."
+msgid "Serbia"
+msgstr "氐乇亘賷丕"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "if set to yes, report check result by mail."
+msgid "Newzealand"
+msgstr "賳賷賵夭賷賱賳丿丕 "
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "if set to yes, check files/directories writable by everybody."
+msgid "This directory should remain within the root filesystem"
+msgstr "賴匕丕 丕賱丿賱賷賱 賷噩亘 兀賳 賷賰賵賳 賮賷 賳馗丕賲 丕賱賲賱賮丕鬲 丕賱噩匕乇賷"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "if set to yes, reports check result to tty."
+msgid "CapsLock key"
+msgstr "賲賮鬲丕丨 CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "if set to yes, run some checks against the rpm database."
+msgid "Install bootloader"
+msgstr "鬲孬亘賷鬲 賲丨賲賾賽賱 丕賱廿賯賱丕毓"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "if set to yes, check if the network devices are in promiscuous mode."
+msgid "Select the memory size of your graphics card"
+msgstr "廿禺鬲乇 丨噩賲 匕丕賰乇丞 亘胤丕賯丞 丕賱卮丕卮丞"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
+msgstr ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
+msgstr "Dynamic IP Address Pool:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "if set to yes, check additions/removals of suid root files."
+msgid "LVM name?"
+msgstr "丕爻賲 LVM責"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "鬲賲鬲 丕夭丕賱丞 亘毓囟 丕賱兀噩賴夭丞 賮賷 賮卅丞 丕賱毓鬲丕丿 \"%s\":\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Found %s %s interfaces"
+msgstr "鬲賲 丕賷噩丕丿 %s %s 賵丕噩賴丕鬲"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "if set to yes, run the daily security checks"
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "if set to yes, verify checksum of the suid/sgid files."
+msgid "Post Install"
+msgstr "賲丕 亘毓丿 丕賱鬲孬亘賷鬲"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "if set to yes, check empty password in /etc/shadow."
+msgid "The internal domain name"
+msgstr "丕爻賲 丕賱賳胤丕賯 丕賱丿丕禺賱賷"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "if set to yes, report unowned files."
+msgid "Card IRQ"
+msgstr "Card IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "丕禺鬲乇 爻賵丕賯丞 丕賱兀賯乇丕氐 丕賱賲乇賳丞 丕賱鬲賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕 賱毓賲賱 賯乇氐 丕賱廿賯賱丕毓"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
+msgstr "LILO 賲毓 賯丕卅賲丞 賳氐賷丞"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
+msgstr "賰賱 卮卅 (賱丕 噩丿丕乇 賳丕乇賷)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "You must specify a kernel image"
+msgstr "賷噩亘 兀賳 鬲丨丿丿 氐賵乇丞 丕賱賳賵丕丞"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
+msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮 毓賱賶 賲賳賮匕 USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Do"
+msgstr "丕賮毓賱"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "噩丕乇賷 丕賱廿鬲氐丕賱 亘丕賱賲乇丌丞 賱賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘丕賱丨夭賲 丕賱賲鬲賵賮乇丞..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "丕賱賱賷鬲賵丕賳賷丞 AZERTY (賯丿賷賲)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Brazilian (ABNT-2)"
+msgstr "丕賱亘乇丕夭賷賱賷丞 (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
+msgstr "毓賳賵丕賳 IP 賱賱賲爻鬲囟賷賮/丕賱卮亘賰丞:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"丕賱廿丨丿丕孬賷 丕賱氐丕丿賷 賱賱乇賰賳 丕賱兀賷爻乇 丕賱兀毓賱賶\n"
+"賱卮乇賷胤 丕賱鬲賯丿賲"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "System installation"
+msgstr "鬲孬亘賷鬲 丕賱賳馗丕賲"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "爻丕賳鬲 賮賷賳爻賳鬲 賵 丕賱睾乇賷賳丕丿賷賳"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/賲賱賮/_賮鬲丨"
#: ../../security/help.pm:1
#, c-format
@@ -12585,1075 +12460,753 @@ msgstr ""
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Location of auto_install.cfg file"
+msgstr "丕賱賲賰丕賳 毓賱賶 賲賱賮 install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Delay"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "Hungary"
+msgstr "丕賱賲噩乇"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Total progess"
+msgstr "丕噩賲丕賱賷 丕賱鬲賯丿賲"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+msgid "Color configuration"
+msgstr "廿毓丿丕丿丕鬲 丕賱兀賱賵丕賳"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "賲丿賷乇 丕賱賳馗丕賲 (丕爻賲 丕賱丿禺賵賱 兀賵 丕賱亘乇丿賷 丕賱兀賱賰鬲乇賵賳賷)"
+msgid "New Zealand"
+msgstr "賳賷賵夭賷賱賳丿丕"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "賲賰鬲亘丞 鬲丨賲賷 賲賳 賴噩賲丕鬲 buffer overflow 賵 format string"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "廿爻鬲禺丿賲 libsafe 賱賱賲賱賯賲丕鬲"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "賲爻鬲賵賶 丕賱兀賲賳"
+"There are already some restrictions, and more automatic checks are run every "
+"night."
+msgstr ""
+"鬲賵噩丿 亘毓囟 丕賱賯賷賵丿, 賰賲丕 賷鬲賲 鬲卮睾賷賱 亘乇丕賲噩 賱賱鬲兀賰丿 賲賳 丕賱賳馗丕賲 兀賵鬲賵賲丕鬲賷賰賷丕賸 賰賱 賱賷賱丞."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "賮囟賱丕賸 丕禺鬲乇 賲爻鬲賵賶 丕賱兀賲賳 丕賱匕賷 鬲乇賷丿賴"
+msgid "please choose the date to restore"
+msgstr "乇噩丕亍 丕禺鬲乇 鬲丕乇賷禺 丕賱廿爻鬲毓丕丿丞"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "禺賷丕乇丕鬲 DrakSec 丕賱兀爻丕爻賷丞"
+msgid "Switching from ext2 to ext3"
+msgstr "噩丕乇賷 丕賱鬲睾賷賷乇 賲賳 ext2 丕賱賶 ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"賴匕丕 賲賲丕孬賱 賱賱賲爻鬲賵賶 丕賱爻丕亘賯, 賵 賱賰賳 丕賱賳馗丕賲 賲睾賱賯 賰賱賷丕賸 賵 丕賱賲夭丕賷丕 丕賱兀賲賳賷 毓賱賶 丨丿賴丕 "
-"丕賱兀賯氐賶."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"亘賴匕丕 丕賱賲爻鬲賵賶 丕賱兀賲賳賷, 賷賰賵賳 丕爻鬲禺丿丕賲 賴匕丕 丕賱賳馗丕賲 賰禺丕丿賲 賷氐亘丨 賲賲賰賳丕賸.\n"
-"丕賱賲爻鬲賵賶 丕賱兀賲賳賷 毓丕賱賺 亘卮賰賱 賰丕賮賷 賱丕爻鬲禺丿丕賲 賴匕丕 丕賱賳馗丕賲 賰禺丕丿賲 賷爻鬲胤賷毓 賯亘賵賱\n"
-"丕鬲氐丕賱丕鬲 賲賳 毓賲賱丕亍 賰孬賷乇賷賳. 賲賱丨賵馗丞: 丕匕丕 賰丕賳鬲 賲丕賰賷賳鬲賰 賲噩乇丿 毓賲賷賱 毓賱賶 丕賱廿賳鬲乇賳鬲 "
-"賮丕賱兀噩丿乇 亘賰 丕禺鬲賷丕乇 賲爻鬲賵賶 兀賲賳賷 兀賯賱."
+msgid "Netherlands Antilles"
+msgstr "兀賳鬲賷賱 賴賵賱賳丿丕"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"鬲賵噩丿 亘毓囟 丕賱賯賷賵丿, 賰賲丕 賷鬲賲 鬲卮睾賷賱 亘乇丕賲噩 賱賱鬲兀賰丿 賲賳 丕賱賳馗丕賲 兀賵鬲賵賲丕鬲賷賰賷丕賸 賰賱 賱賷賱丞."
+msgid "Browse to new restore repository."
+msgstr "丕爻鬲毓乇囟 丕賱賶 賲爻鬲賵丿毓 丕爻鬲毓丕丿丞 噩丿賷丿."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"賴匕丕 賴賵 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 丕賱賯賷丕爻賷 賱賱丨丕爻賵亘 丕賱匕賷 爻賷爻鬲禺丿賲 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賰毓賲賷賱."
+"\n"
+"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
+"\n"
+"賴匕丕 丕賱賲毓丕賱噩 賷爻賲丨 賱賰 亘鬲孬亘賷鬲 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 兀賵 丕賱亘毓賷丿丞 賱賷鬲賲 丕爻鬲禺丿丕賲賴丕 賲賳 賴匕賴 "
+"丕賱賲丕賰賷賳賵 賵 賲賳 丕賱賲丕賰賷賳丕鬲 丕賱兀禺乇賶 毓賱賶 丕賱卮亘賰丞.\n"
+"\n"
+"賷爻兀賱賰 丕賱賲毓丕賱噩 毓賳 賰賱 丕賱賲毓賱賵賲丕鬲 丕賱兀爻丕爻賷丞 賱廿毓丿丕丿 丕賱胤丕亘毓丞 賵 鬲毓胤賷賰 丕賱賯丿乇丞 毓賱賶 "
+"丕賱賵氐賵賱 賱賰賱 賲卮睾賱丕鬲 丕賱胤丕亘毓丕鬲 賵 禺賷丕乇丕鬲 丕賱賲卮睾賱丕鬲 賵 兀賳賵丕毓 賵氐賱丕鬲 丕賱胤丕亘毓丞."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "賰賱賲丕鬲 丕賱賲乇賵乇 賲賲賰賾賳丞 丕賱丌賳, 賱賰賳 丕賱丕爻鬲禺丿丕賲 賰丨丕爻亘 賮賷 卮亘賰丞 賷夭丕賱 睾賷乇 賲賮囟賾賱."
+msgid "and %d unknown printers"
+msgstr "賵 %d 胤丕亘毓丕鬲 睾賷乇 賲毓乇賵賮丞"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"賷噩亘 丕爻鬲禺丿丕賲 賴匕丕 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 亘丨匕乇. 賮賴賵 賷噩毓賱 賳馗丕賲賰 兀爻賴賱 賮賷 丕賱廿爻鬲禺丿丕賲,\n"
-"賱賰賳 賷賲賵賳 丨爻丕爻丕賸 噩丿丕賸. 賱匕丕 賱丕 賷噩亘 丕爻鬲禺丿丕賲賴 賱賲丕賰賷賳丞 賲鬲氐賱丞 亘賲丕賰賷賳丕鬲 兀禺乇賶\n"
-"兀賵 丕賱賶 丕賱廿賳鬲乇賳鬲. 賱丕 賷賵噩丿 丿禺賵賱 亘賰賱賲丞 丕賱賲乇賵乇."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "賲乇鬲賮毓 噩丿丕"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丕鬲 ISDN PCI. 賮囟賱丕賸 丕禺鬲乇 賵丕丨丿丞 賮賷 丕賱卮丕卮丞 丕賱鬲丕賱賷丞."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "賲乇鬲賮毓 兀賰孬乇"
+msgid "GB"
+msgstr "睾賷睾丕亘丕賷鬲"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "賲乇鬲賮毓"
+msgid "Please give a user name"
+msgstr "乇噩丕亍賸 賯賲 亘廿毓胤丕亍 丕爻賲 賲爻鬲禺丿賲"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "賮賯賷乇"
+msgid "Enable CD Boot?"
+msgstr "鬲賲賰賷賳 丕賱廿賯賱丕毓 賲賳 丕賱賯乇氐 丕賱賲丿賲噩責"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "賲乇丨亘丕 亘丕賱賲禺鬲乇賯賷賳"
+msgid " enter `void' for void entry"
+msgstr " enter `void' for void entry"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "賷乇噩賶 丕毓丕丿丞 鬲爻噩賷賱 丕賱丿禺賵賱 丕賱賶 %s 賱鬲賳卮賷胤 丕賱鬲睾賷賷乇丕鬲"
+msgid "on Hard Drive"
+msgstr "毓賱賶 丕賱賯乇氐 丕賱氐賾賱亘"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "賷乇噩賶 鬲爻噩賷賱 丕賱禺乇賵噩 孬賲 丕爻鬲禺丿賲 Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "賵氐賱丞 Winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow 賵 /etc/hosts.deny 賲毓丿賾丕賳 賲爻亘賯丕賸 - 賱賲 賷鬲賲 丕賱鬲睾賷賷乇"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"鬲賴丕賳賷賳丕, 鬲賲 鬲孬亘賷鬲 賵 鬲賴賷卅丞 胤丕亘毓鬲賰!\n"
+"\n"
+"賷賲賰賳賰 丕賱胤亘丕毓丞 亘丕爻鬲禺丿丕賲 兀賲乇 \"丕胤亘毓\" 賮賷 鬲胤亘賷賯丕鬲賰 (毓丕丿丞 賮賷 賯丕卅賲丞 \"賲賱賮\").\n"
+"\n"
+"丕匕丕 兀乇丿鬲 丕囟丕賮丞 兀賵 丨匕賮 兀賵 丕毓丕丿丞 鬲爻賲賷丞 胤丕亘毓丞, 兀丞 丕匕丕 兀乇丿鬲 鬲睾賷賷乇 禺賷丕乇丕鬲 丕賱胤丕亘毓丞 "
+"丕賱廿賮鬲乇丕囟賷丞 (噩賵丿丞 丕賱胤亘丕毓丞, 鬲睾賷賷乇 丕賱丨亘乇, ...), 丕禺鬲乇 \"丕賱胤丕亘毓丞\" 賮賷 賯爻賲 \"丕賱毓鬲丕丿"
+"\" 賮賷 賲乇賰夭 鬲丨賰賲 Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "賱丕 丨丕噩丞 丕賱賶 丕賳卮丕亍 /etc/dhcpd.conf 兀賵賱丕賸!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "丨氐賱 卮卅 禺胤兀! - 賴賱 鬲賲 鬲孬亘賷鬲 mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "丕賱丌賳 賷賲賰賳賰 鬲卮睾賷賱 XawTV (賮賷 丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞!) !\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO image 賴賷 %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "賱丕 鬲賵噩丿 賲爻丕丨丞 鬲亘丿賷賱 賰丕賮賷丞 賱賱賯賷丕賲 亘丕賱鬲孬亘賷鬲, 賮囟賱丕賸 夭丿 賲爻丕丨丞 丕賱鬲亘丿賷賱"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "賱丕 鬲賵噩丿 爻賵丕賯丞 賯乇氐 賲乇賳!"
+msgid "%s on %s"
+msgstr "%s 毓賱賶 %s"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "賷賲賰賳 丕夭丕賱丞 丕賱賯乇氐 丕賱賲乇賳 丕賱丌賳"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"賷賯賵賲 賱賷賳賰爻 亘廿丿丕乇丞 丕賱賵賯鬲 丨爻亘 鬲賵賯賷鬲 睾乇賷賳鬲卮 孬賲 賷鬲乇噩賲賴 丕賱賶\n"
+"丕賱鬲賵賯賷鬲 丕賱賲丨賱賷 丨爻亘 丕賱賲賳胤賯丞 丕賱夭賲賳賷丞 丕賱鬲賷 丕禺鬲乇鬲賴丕. 丕匕丕 賰丕賳鬲 丕賱爻丕毓丞\n"
+"丕賱鬲賷 賮賷 丕賱賱賵丨丞 丕賱乇卅賷爻賷丞 賲囟亘賵胤丞 毓賱賶 丕賱鬲賵賯賷鬲 丕賱賲丨賱賷, 賷賲賰賳賰 丕夭丕賱丞 鬲賳卮賷胤 匕賱賰\n"
+"毓賳 胤乇賷賯 丕夭丕賱丞 丕賱鬲兀卮賷乇 賲賳 \"爻丕毓丞 丕賱噩賴丕夭 賲囟亘賵馗丞 毓賱賶 鬲賵賯賷鬲 睾乇賷賳鬲卮\" 賵 丕賱鬲賷 "
+"爻鬲噩毓賱\n"
+"賱賷賳賰爻 賷毓賱賲 兀賳 爻丕毓丞 丕賱賳馗丕賲 賵 爻丕毓丞 丕賱噩賴丕夭 毓賱賶 賳賮爻 丕賱鬲賵賯賷鬲. 賴匕丕\n"
+"賲賮賷丿 毓賳丿賲丕 鬲爻鬲囟賷賮 丕賱賲丕賰賷賳丞 賳馗丕賲 鬲卮睾賷賱 丌禺乇 賲孬賱 Windows.\n"
+"\n"
+"禺賷丕乇 \"鬲夭丕賲賳 丌賱賷 賱賱賵賯鬲\" 爻賷賯賵賲 丌賱賷丕賸 亘囟亘胤 丕賱爻丕毓丞 毓賳 胤乇賷賯\n"
+"丕?鬲氐丕賱 亘禺丕丿賲 賵賯鬲 亘毓賷丿 毓賱賶 丕?賳鬲乇賳鬲. 賰賷 鬲毓賲賱 賴匕賴 丕賱賲賷夭丞,\n"
+"賷噩亘 兀賳 鬲賰賵賳 賱丿賷賰 賵氐賱丞 丕賳鬲乇賳鬲 毓丕賲賱丞. 賲賳 丕?賮囟賱 丕禺鬲賷丕乇 禺丕丿賲\n"
+"丕賱賵賯鬲 丕?賯乇亘 丕賱賷賰. 賴匕丕 丕賱禺賷丕乇 賷孬亘鬲 禺丕丿賲 賵賯鬲\n"
+"賷賲賰賳 丕爻鬲禺丿丕賲賴 毓賳 胤乇賷賯 丕賱賲丕賰賷賳丕鬲 丕?禺乇賶 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "鬲毓匕乇 丕賱賵氐賵賱 丕賱賶 丕賱賯乇氐 丕賱賲乇賳!"
+msgid "Which is your timezone?"
+msgstr "賲丕 賴賷 賲賳胤賯鬲賰 丕賱夭賲賳賷丞責"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "賮囟賱丕賸 兀丿禺賱 賯乇氐 賲乇賳:"
+msgid "Guinea"
+msgstr "睾賷賳賷丕"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "丕賰鬲亘 丕賱廿毓丿丕丿丕鬲"
+msgid "The system is now connected to the Internet."
+msgstr "丕賱賳馗丕賲 丕賱丌賳 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Dynamic IP Address Pool:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "噩賵噩賷丕 丕賱噩賳賵亘賷丞 賵 噩夭乇 爻丕賳丿賵賷鬲卮 丕賱噩賳賵亘賷丞"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"鬲賲 丕爻鬲禺乇丕噩 兀睾賱亘 賴匕賴 丕賱賯賷賲\n"
-"賲賳 丕賱賳馗丕賲.\n"
-"賷賲賰賳賰 丕賱鬲毓丿賷賱 丕匕丕 丕丨鬲噩鬲 賱匕賱賰."
+msgid "Japan (broadcast)"
+msgstr "丕賱賷丕亘丕賳 (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "鬲賴賷卅丞 禺丕丿賲 dhcpd"
+msgid "Mozambique"
+msgstr "賲賵夭賲亘賷賯"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "IP Range End:"
+msgid "Icon"
+msgstr "兀賷賯賵賳丞"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "IP Range Start:"
+msgid "Please choose what you want to backup"
+msgstr "乇噩丕亍 丕禺鬲乇 賲丕 鬲乇賷丿 賳爻禺賴 丕丨鬲賷丕胤賷丕賸"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "禺丕丿賲丕鬲 丕賱廿爻賲:"
+msgid "256 colors (8 bits)"
+msgstr "256 賱賵賳 (8 亘鬲)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "丕爻賲 丕賱賳胤丕賯:"
+msgid "Read-write"
+msgstr "賱賱賯乇丕亍丞 賵 丕賱賰鬲丕亘丞"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "毓賳賵丕賳 Broadcast:"
+msgid "Size: %s\n"
+msgstr "丕賱丨噩賲: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet Mask:"
+msgid "Hostname: "
+msgstr "丕爻賲 丕賱賲爻鬲囟賷賮 :"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "丕賱賲賵噩賴丕鬲:"
+msgid "Chunk size %s\n"
+msgstr "丨噩賲 Chunk %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Build the future of Linux!"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
+msgid "Local Printer"
+msgstr "胤丕亘毓丞 賲丨賱賷丞"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"賷噩亘 丕毓丕丿丞 鬲卮睾賷賱 賲丿賷乇 丕賱毓乇囟 賱賰賷 賷鬲賲 鬲賮毓賷賱 丕賱鬲睾賷賷乇丕鬲. \n"
-"(service dm restart - 賮賷 爻胤乇 丕賱兀賵丕賲乇)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "鬲賴賷卅丞 dhcpd..."
+" 噩賲賷毓 丕賱丨賯賵賯 賲丨賮賵馗丞 (C) 2001 MandrakeSoft 賲賳 丿賵亘賵賳 爻賷亘丕爻鬲賷丕賳 <dupont_s"
+"\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "丕丨匕賮 丕賱毓賲賷賱"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- 鬲丨乇賷乇 丕賱毓賲賷賱"
+msgid "ADSL connection"
+msgstr "賵氐賱丞 ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "丕囟丕賮丞 毓賲賷賱 -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "賱丕 鬲賴賷卅丞, 丕囟睾胤 賲毓丕賱噩 兀賵 賲鬲賯丿賲.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "丕爻賲丨 賱賱毓賲賱丕亍 丕賱賳丨丕賮 (Thin Clients)"
+msgid "Error!"
+msgstr "禺胤兀 ! "
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "毓賲賷賱 賳丨賷賮 (Thin Client)"
+msgid "cable connection detected"
+msgstr "鬲賲 丕賰鬲卮丕賮 賵氐賱丞 賰賷亘賱"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "賱賲 賷鬲賲 丕賳卮丕亍 氐賵乇 丕賯賱丕毓 毓亘乇 丕賱卮亘賰丞!"
+msgid "Permission denied transferring %s to %s"
+msgstr "鬲賲 乇賮囟 賱丕鬲氐乇賷丨 亘賳賯賱 %s 丕賱賶 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "丕賱賳賵毓: %s"
+msgid "/_Report Bug"
+msgstr "/_鬲賯乇賷乇 禺胤兀"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- 丕丨匕賮 丕賱賲爻鬲禺丿賲"
+msgid "Resize"
+msgstr "鬲睾賷賷乇 丕賱丨噩賲"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "丕囟賮 賲爻鬲禺丿賲 -->"
+msgid "Dominica"
+msgstr "丿賵賲賷賳賷賰丕"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! 鬲馗賴乇 丕匕丕 賰丕賳鬲 賰賱賲丞 丕賱賲乇賵乇 賮賷 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱賳馗丕賲 賲禺鬲賱賮丞\n"
-"毓賳 鬲賱賰 丕賱鬲賷 賱賯丕毓丿丞 亘賷丕賳丕鬲 禺丕丿賲 丕賱胤乇賮賷丕鬲.\n"
-"丕丨匕賮/兀毓丿 丕囟丕賮丞 丕賱賲爻鬲禺丿賲 丕賱賶 禺丕丿賲 丕賱胤乇賮賷丕鬲 賱鬲賲賰賷賳 鬲爻噩賷賱 丕賱丿禺賵賱."
+msgid "Please enter the device name to use for backup"
+msgstr "賮囟賱丕賸 兀丿禺賱 丕爻賲 噩賴丕夭 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "丕丨匕賮 賰賱 NBI"
+msgid "Resolution: %s\n"
+msgstr "丿賯丞 丕賱毓乇囟: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- 丨匕賮"
+msgid "matching"
+msgstr "丕賱賲賵丕卅賲丞"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "爻賷爻鬲睾乇賯 賴匕丕 亘囟毓 丿賯丕卅賯."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"鬲毓匕乇 丕賱賵氐賵賱 丕賱賶 賵丨丿丕鬲 丕賱賳賵丕丞 丕賱禺丕氐丞 亘賳賵丕丞 丕賱賳馗丕賲 (丕賱賲賱賮 %s 賲賮賯賵丿), 亘卮賰賱 毓丕賲 "
+"賷毓賳賷 賴匕丕 兀賳 賯乇氐 丕賱廿賯賱丕毓 丕賱賲乇賳 賱賷爻 賲丨丿賾孬丕賸 賲毓 賵爻賷胤 丕賱鬲孬亘賷鬲 (賮囟賱丕賸 賯賲 亘廿賳卮丕亍 賯乇氐 "
+"丕賯賱丕毓 噩丿賷丿)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "丕亘賳賷 賰賱 丕氐丿丕乇丕鬲 丕賱賳賵丕丞 -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"賮囟賱丕賸 丕禺鬲乇 丕賱賲賳賮匕 丕賱氐丨賷丨. 賲孬賱丕賸 賱賲賳賮匕 \"COM1\" 賮賷\n"
+"Windows 丕爻賲賴 \"ttys0\" 賮賷 賱賷賳賰爻."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "賱賲 賷鬲賲 丕禺鬲賷丕乇 NIC!"
+msgid "The following packages are going to be removed"
+msgstr "爻賷鬲賲 丨匕賮 丕賱丨夭賲 丕賱鬲丕賱賷丞"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "丕亘賳賷 NIC 賵丕丨丿丞 -->"
+msgid "Connect to the Internet"
+msgstr "賵氐賾賱 廿賱賶 丕賱廿賳鬲乇賳鬲 "
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "賱賲 賷鬲賲 丕賷噩丕丿 賳賵丕丞!"
+msgid "Use existing partitions"
+msgstr "丕爻鬲禺丿賲 丕賱鬲噩夭卅丕鬲 丕賱賲賵噩賵丿丞"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "丕亘賳賷 賰賱 丕賱賳賵丕丞 -->"
+msgid "Canadian (Quebec)"
+msgstr "丕賱賰賳丿賷賾丞 (賰賷亘賷賰)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "賲賱賮 ISO 丕賱廿賯賱丕毓"
+msgid "Mouse device: %s\n"
+msgstr "噩賴丕夭 丕賱賮兀乇丞: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "賯乇氐 丕賱廿賯賱丕毓"
+msgid "Reselect correct fonts"
+msgstr "兀毓丿 丕禺鬲賷丕乇 丕賱禺胤賵胤 丕賱氐丨賷丨丞"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"賵氐賮 丕賱禺賷丕乇丕鬲:\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"賲賳 賮囟賱賰 賰賳 丨匕乇丕賸 毓賳丿 丕爻鬲禺丿丕賲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 毓亘乇 FTP, 賱兀賳 \n"
+"丕賱賳爻禺 丕賱賲亘賳賷丞 賲爻亘賯丕賸 賮賯胤 賴賷 丕賱鬲賷 賷鬲賲 丕乇爻丕賱賴丕 丕賱賶 丕賱禺丕丿賲.\n"
+"賱匕丕 賮丕賱丌賳 毓賱賷賰 兀賳 鬲亘賳賷 丕賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞 毓賱賶 丕賱賯乇氐 \n"
+"丕賱氐賱亘 賯亘賱 丕乇爻丕賱賴丕 丕賱賶 丕賱禺丕丿賲.\n"
"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" 卮賰乇 禺丕氐:\n"
-"\t- 賲卮乇賵毓 LTSP http://www.ltsp.org\n"
-"\t- 賲丕賷賰賱 亘乇丕賵賳 <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"賮賷 丕賱賳賴丕賷丞, 爻賷鬲賲 爻丐丕賱賰 毓賳 丕匕丕 賰賳鬲 鬲乇賷丿 亘丿亍 丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞\n"
+"毓賳丿 亘丿亍 丕賱賳馗丕賲. 賱丕丨胤 兀賳賴 爻賷鬲賲 爻丐丕賱賰 賴匕丕 丕賱爻丐丕賱 丨鬲賶 賱賵 丕禺鬲乇鬲 毓丿賲 丕禺鬲亘丕乇\n"
+"丕賱鬲賴賷卅丞, 亘賰賱 賵囟賵丨, 爻鬲禺鬲丕乇 \"賱丕\" 丕匕丕 賰丕賳鬲 賲丕賰賷賳鬲賰 爻鬲爻鬲禺丿賲 賰噩賴丕夭\n"
+"禺丕丿賲, 兀賵 丕匕丕 賱賲 鬲賳噩丨 賮賷 鬲賴賷卅丞 丕賱毓乇囟\n"
+"亘卮賰賱 氐丨賷丨."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" 噩賲賷毓 丕賱丨賯賵賯 賲丨賮賵馗丞 (C) 2002 賱賭MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "賳丨賳 丕賱丌賳 爻賳賯賵賲 亘鬲賴賷卅丞 丕賱賵氐賱丞 %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "兀囟賮/丕丨匕賮 丕賱毓賲賱丕亍"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert 賱賱卮乇賰丕鬲"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "兀囟賮/丕丨匕賮 丕賱賲爻鬲禺丿賲賷賳"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "鬲丨賯賯 丌賱賷 賲賳 丕賱胤丕亘毓丕鬲"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "賱賲 兀鬲賲賰賳 賲賳 廿賷噩丕丿 兀賷 禺胤.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "氐賵乇 丕賯賱丕毓 丕賱卮亘賰丞"
+msgid "Language"
+msgstr "丕禺鬲乇 賱睾鬲賰"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "廿禺鬲賷丕乇 賵丨丿丕鬲 丕賱胤丕亘毓丞"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "兀賵賯賮 丕賱禺丕丿賲"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "亘毓丿 鬲睾賷賷乇 賳賵毓 丕賱鬲噩夭卅丞 %s, 賮廿賳賰 爻鬲爻禺乇 賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 丕賱鬲噩夭卅丞"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "丕亘丿兀 丕賱禺丕丿賲"
+msgid "%d seconds"
+msgstr "%d 孬賵丕賳"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "毓胤賾賱 丕賱禺丕丿賲"
+msgid "Insert a blank floppy in drive %s"
+msgstr "兀丿禺賱 賯乇氐 賲乇賳 賮丕乇睾 賮賷 丕賱爻賵丕賯丞 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "賲賰賾賳 丕賱禺丕丿賲"
+msgid "A valid URI must be entered!"
+msgstr "賷噩亘 丕丿禺丕賱 URI 氐丕賱丨!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "鬲賴賷卅丞 禺丕丿賲 胤乇賮賷丕鬲 Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "鬲賲 丕賷噩丕丿 丕賱賵丕噩賴丞 \"%s\" 賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕責"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "丕丨匕賮 丕賱賲丕丿丞 丕賱兀禺賷乇丞"
+msgid "Re-configure interface and DHCP server"
+msgstr "廿毓丕丿丞 廿毓丿丕丿 丕賱賵丕噩賴丞 賵 禺丕丿賲 DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "兀囟賮 賲丕丿丞"
+msgid "Sound configuration"
+msgstr "丕毓丿丕丿丕鬲 丕賱氐賵鬲"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "鬲孬亘賷鬲 丌賱賷"
+msgid "Photo test page"
+msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 賱氐賵乇丞"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"鬲賲 鬲賵賱賷丿 丕賱賯乇氐 丕賱賲乇賳 亘賳噩丕丨.\n"
-"賷賲賰賳賰 丕賱丌賳 丕毓丕丿丞 丕賱鬲孬亘賷鬲."
+msgid "Custom disk partitioning"
+msgstr "鬲噩夭卅丞 賲禺氐氐丞"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "鬲賴丕賳賷賳丕!"
+msgid "Enter Printer Name and Comments"
+msgstr "兀丿禺賱 丕爻賲 丕賱胤丕亘毓丞 賵 丕賱鬲毓賱賷賯丕鬲"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"丕賱胤丕亘毓丕鬲 丕賱鬲丕賱賷丞\n"
"\n"
-"兀賴賱丕賸 亘賰賲.\n"
-"\n"
-"賲毓丕賵賲賱丕鬲 丕賱鬲孬亘賷鬲 丕賱丌賱賷 賲賵噩賵丿丞 毓賱賶 丕賱賯爻賲 丕賱兀賷爻乇"
+"%s%s\n"
+"賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "噩丕乇賷 丕賳卮丕亍 賯乇氐 丕賱鬲孬亘賷鬲 丕賱丌賱賷"
+msgid "type: %s"
+msgstr "丕賱賳賵毓: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "賷丿賵賷"
+msgid "Slovakian (QWERTY)"
+msgstr "丕賱爻賱賵賮丕賰賷丞 (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"賮囟賱丕賸 丕禺鬲乇 賱賰賱 禺胤賵丞 丕匕丕 賰賳鬲 爻鬲賯賵賲 亘廿毓丕丿鬲賴丕 丌賱賷丕賸 兀賲 兀賳賰 鬲乇賷丿 兀賳 賷賰賵賳 丕賱鬲孬亘賷鬲 "
-"亘卮賰賱 賷丿賵賷."
+msgid "No Sound Card detected!"
+msgstr "賱賲 賷鬲賲 丕禺鬲賷丕乇 亘胤丕賯丞 氐賵鬲"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "鬲賴賷卅丞 丌賱賷丞 賱賱禺胤賵丕鬲"
+msgid "Mouse Port"
+msgstr "賲賳賮匕 丕賱賮兀乇丞"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "丕毓丕丿丞"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"賷噩亘 丕毓丕丿丞 鬲卮睾賷賱 賲丿賷乇 丕賱毓乇囟 賱賰賷 賷鬲賲 鬲賮毓賷賱 丕賱鬲睾賷賷乇丕鬲. \n"
+"(service dm restart - 賮賷 爻胤乇 丕賱兀賵丕賲乇)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "丕賱禺丕丿賲 FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 賯乇氐 賱賱鬲孬亘賷鬲 丕賱丌賱賷. 賴匕賴 丕賱賲賷夭丞 禺胤乇丞 亘毓囟 丕賱卮卅 賵 賷噩亘 "
-"丕爻鬲禺丿丕賲賴丕 亘丨匕乇.\n"
-"\n"
-"亘賴匕賴 丕賱賲賷夭丞 賷賲賰賳賰 丕毓丕丿丞 毓賲賱 丕賱鬲孬亘賷鬲 丕賱匕賷 賯賲鬲 亘賴 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇, 賲毓 鬲賳亘賷賴賰 "
-"賱亘毓囟 丕賱禺胤賵丕鬲 丕賱鬲賷 賷噩亘 毓賱賷賰 賮賷賴丕 鬲睾賷賷乇 丕賱賯賷賲, 丨鬲賶 鬲鬲賲賰賳 賲賳 鬲睾賷賷乇賴丕.\n"
-"\n"
-"賱兀賯氐賶 丨丿 賲賳 丕賱兀賲丕賳, 爻鬲鬲賲 鬲噩夭卅丞 賵 鬲噩賴賷夭 丕賱兀賯乇丕氐 丕賱氐賱亘丞 亘卮賰賱 丌賱賷, 賲孬賱賲丕 丕禺鬲乇鬲 "
-"兀孬賳丕亍 丕賱鬲孬亘賷鬲 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇.\n"
+"Arguments: (arg)\n"
"\n"
-"賴賱 鬲乇賷丿 丕賱賲鬲丕亘毓丞責"
+"Enable/Disable msec hourly security check."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "兀丿丕丞 丕毓丿丕丿 丕賱賲孬亘賾鬲 丕賱丌賱賷"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "鬲丨賵賷賱 禺胤賵胤 pfm"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "賱丕 賷賲賰賳賳賷 丕賷噩丕丿 賲賱賮 丕賱氐賵乇丞 `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "賳賵毓 丕賱賭bus 丕賱賲乇鬲亘胤丞 亘賴 丕賱賮兀乇丞"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "禺胤兀 ! "
+msgid "Uganda"
+msgstr "兀賵睾賳丿丕"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Arguments: (size)\n"
"\n"
-"賲卮丕賰賱 丕爻鬲毓丕丿丞 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞:\n"
-"\n"
-"兀孬賳丕亍 禺胤賵丞 丕賱鬲孬亘賷鬲, 爻賷賯賵賲 Drakbackup 亘丕賱鬲兀賰丿 賲賳 賰賱 賲賱賮丕鬲\n"
-"丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賯亘賱 丕爻鬲毓丕丿鬲賴丕.\n"
-"賯亘賱 丕賱廿爻鬲毓丕丿丞 爻賷賯賵賲 drakbackup 亘丨匕賮 \n"
-"丕賱丿賱賷賱 丕賱兀氐賱賷 賵 爻鬲禺爻乇 賰賱 丕賱亘賷丕賳丕鬲 丕賱鬲賷 \n"
-"毓賱賷賴. 賲賳 丕賱賲賴賲 兀賳 鬲賰賵賳 丨匕乇丕賸 賵 賱丕 鬲賯賵賲 亘鬲毓丿賷賱 \n"
-"亘賷丕賳丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賷丿賵賷丕賸.\n"
+"Set shell commands history size. A value of -1 means unlimited."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"賵氐賮 丕賱禺賷丕乇丕鬲:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"賲賳 賮囟賱賰 賰賳 丨匕乇丕賸 毓賳丿 丕爻鬲禺丿丕賲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 毓亘乇 FTP, 賱兀賳 \n"
-"丕賱賳爻禺 丕賱賲亘賳賷丞 賲爻亘賯丕賸 賮賯胤 賴賷 丕賱鬲賷 賷鬲賲 丕乇爻丕賱賴丕 丕賱賶 丕賱禺丕丿賲.\n"
-"賱匕丕 賮丕賱丌賳 毓賱賷賰 兀賳 鬲亘賳賷 丕賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞 毓賱賶 丕賱賯乇氐 \n"
-"丕賱氐賱亘 賯亘賱 丕乇爻丕賱賴丕 丕賱賶 丕賱禺丕丿賲.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Description:\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "噩夭乇 丕賱賯賲乇"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
+"賳丨賳 丕賱丌賳 爻賳賯賵賲 亘鬲賴賷卅丞 丕賱賵氐賱丞 %s.\n"
+"\n"
+"丕囟睾胤 賲賵丕賮賯 賱賱賲鬲丕亘毓丞."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" 鬲丨丿賷孬丕鬲 2002 MandrakeSoft 賲賳 Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "賵囟毓 Yaboot"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲賾丨丿丞 丕賱兀賲乇賷賰賷賾丞 (cable)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" 噩賲賷毓 丕賱丨賯賵賯 賲丨賮賵馗丞 (C) 2001 MandrakeSoft 賲賳 丿賵亘賵賳 爻賷亘丕爻鬲賷丕賳 <dupont_s"
-"\\@epita.fr>"
+"鬲毓匕乇鬲 丕毓丕丿丞 鬲卮睾賷賱 LiLo!\n"
+"卮睾賾賱 \"lilo\" 賰賲爻鬲禺丿賲 噩匕乇 賮賷 爻胤乇 丕賱兀賵丕賲乇 賵 兀賰賲賱 鬲孬亘賷鬲 爻賲丕鬲 LiLo."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generic 3 Button Mouse"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "丕禺鬲乇 賵爻賷胤 丌禺乇 賱賱丕爻鬲毓丕丿丞 賲賳賴"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "賲丿賷乇 丕賱亘乇丕賲噩"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -13665,17 +13218,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"restore description:\n"
@@ -13703,5009 +13258,5520 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" 亘毓囟 兀禺胤丕亍 sendmail 賷賰賵賳 爻亘亘賴丕 \n"
-" 鬲賴賷卅丞 爻賷卅丞 賲賳 postfix. 賱丨賱 賴匕丕 丕賱賲卮賰賱丞 毓賱賷賰\n"
-" 鬲毓賷賷賳 myhostname 兀賵 mydomain 賮賷 賲賱賮 /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "廿毓丕丿丞 鬲爻賱賷賲"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "丕賱賯乇氐 賮賷 丕賱賲賰丕賳 丕賱氐丨賷丨 - 鬲丕亘毓"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "賰賷賱賵亘丕賷鬲"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "丕爻鬲毓丕丿丞"
+msgid "Network & Internet"
+msgstr "丕賱卮亘賰丞 賵 丕賱廿賳鬲乇賳鬲"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "賯賲 亘丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 丕賱丌賳"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "丕賱賱賷鬲賵丕賳賷丞 \"氐賵鬲賷\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "廿毓丿丕丿 賲鬲賯丿賲"
+msgid "Net Boot Images"
+msgstr "氐賵乇 丕賯賱丕毓 丕賱卮亘賰丞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "廿毓丿丕丿丕鬲 丕賱賲毓丕賱噩"
+msgid "Sharing of local scanners"
+msgstr "賲卮丕乇賰丞 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲丨賱賷丞"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "丕毓乇囟 鬲賴賷卅丞 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "鬲毓匕乇 丕賱鬲兀賰丿 賲賳 賵噩賵丿 Plug 'n Play. 賮囟賱丕賸 丕禺鬲乇 丕賱卮丕卮丞 丕賱氐丨賷丨丞"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "賯賲 亘丕賱賳爻禺 丕賱丌賳 賲賳 賲賱賮 丕賱鬲賴賷卅丞"
+msgid "Services and deamons"
+msgstr "丕賱禺丿賲丕鬲 賵 丕賱賲乇丕賯亘丕鬲"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "廿毓丿丕丿丕鬲 Drakbackup"
+msgid "Remote host name missing!"
+msgstr "丕爻賲 丕賱賲爻鬲囟賷賮 丕賱亘毓賷丿 賲賮賯賵丿!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "丕噩賲丕賱賷 丕賱鬲賯丿賲"
+msgid "with /usr"
+msgstr "賲毓 /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "噩丕乇賷 丕乇爻丕賱 丕賱賲賱賮丕鬲..."
+msgid "Network"
+msgstr "丕賱卮亘賰丞"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "丕乇爻丕賱 丕賱賲賱賮丕鬲 毓賳 胤乇賷賯 FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "鬲丨賯賾賯 丌賱賷丕賸 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賲丕賰賷賳丕鬲 鬲毓賲賱 毓賱賶 Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "丕賳爻禺 賲賱賮丕鬲 兀禺乇賶"
+msgid "This password is too simple"
+msgstr "賰賱賲丞 丕賱賲乇賵乇 賴匕賴 亘爻賷胤丞 噩丿丕"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賲爻鬲禺丿賲"
+msgid "Slovakian (QWERTZ)"
+msgstr "丕賱爻賱賵賮丕賰賷丞 (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "鬲丨鬲 丕賱鬲胤賵賷乇 ... 丕賳鬲馗乇 賮囟賱丕"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "鬲孬亘賷鬲 賲氐睾賾乇 賮毓賱丕賸 (禺氐賵氐丕賸 亘丿賵賳 urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"賱賲 賷鬲賲 丕賷噩丕丿 賲賱賮 鬲賴賷卅丞 \n"
-"賮囟賱丕 丕囟睾胤 賲毓丕賱噩 賱兀賵 賲鬲賯丿賲."
+" 丕賳賯賱 \n"
+"丕賱丌賳"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "乇噩丕亍 丕禺鬲乇 丕賱亘賷丕賳丕鬲 丕賱賲胤賱賵亘 賳爻禺賴丕 丕丨鬲賷丕胤賷丕..."
+msgid "Use daemon"
+msgstr "丕爻鬲禺丿賲 丕賱賲乇丕賯亘"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "乇噩丕亍 丕禺鬲乇 賵爻賷胤 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷..."
+msgid "Authentication"
+msgstr "丕賱鬲丨賯賯"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "乇噩丕亍 丕禺鬲乇 鬲丕乇賷禺 丕賱廿爻鬲毓丕丿丞..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "兀囟賮 賴匕賴 丕賱胤丕亘毓丞 丕賱賶 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "賷噩亘 鬲孬亘賷鬲 丕賱丨夭賲 丕賱鬲丕賱賷丞:\n"
+msgid "Additional CUPS servers: "
+msgstr "禺丕丿賲丕鬲 CUPS 丕賱廿囟丕賮賷丞: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"禺胤兀 兀孬賳丕亍 丕乇爻丕賱 丕賱賲賱賮 毓賷乇 FTP.\n"
-" 賮囟賱丕賸 賯賲 亘鬲氐丨賷丨 丕毓丿丕丿丕鬲 FTP."
+"丕禺鬲乇 賵丕丨丿丞 賲賳 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲賲 丕賱鬲丨賯賯 賲賳賴丕 丌賱賷丕賸 賲賳 丕賱賯丕卅賲丞 兀賵 兀丿禺賱 丕爻賲 "
+"丕賱賲爻鬲囟賷賮 兀賵 乇賯賲 IP 賵 乇賯賲 丕賱賲賳賮匕 丕賱廿禺鬲賷丕乇賷 (丕賱廿賮鬲乇丕囟賷 賴賵 9100) 賮賷 丨賯賵賱 "
+"丕賱廿丿禺丕賱."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "兀賷賳 鬲乇賷丿 鬲丨賲賷賱 丕賱噩賴丕夭 %s責"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "丕爻鬲毓丕丿丞 毓賳 胤乇賷賯 丕賱卮亘賰丞"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "丕賱噩夭丕卅乇"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "丨噩賲 Initrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"禺胤兀 兀孬賳丕亍 丕乇爻丕賱 丕賱亘乇賷丿.\n"
-" 賱賲 賷鬲賲 丕乇爻丕賱 鬲賯乇賷乇 丕賱亘乇賷丿.\n"
-" 賮囟賱丕賸 賯賲 亘廿毓丿丕丿 sendmail"
+"丕匕丕 賰丕賳鬲 賴賳丕賰 禺丕丿賲丕鬲 賲禺鬲賱賮丞 賱賱亘胤丕賯丞 丕賱禺丕氐丞 亘賰, 賲毓 兀賵\n"
+"丿賵賳 鬲爻乇賷毓 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱禺丕丿賲 丕賱匕賷\n"
+"賷賳丕爻亘 丕丨鬲賷丕噩丕鬲賰."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "丕賱鬲丕賱賷"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\t丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 鬲爻鬲禺丿賲 tar 賵 gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "丕賱爻丕亘賯"
+msgid "2 MB"
+msgstr "2 賲賷睾丕亘丕賷鬲"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "丨賮馗"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "丕亘賳賷 丕賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞"
+msgid "Setting Default Printer..."
+msgstr "噩丕乇賷 鬲毓賷賷賳 丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "鬲賯丿賲 丕賱廿爻鬲毓丕丿丞"
+msgid "Interface %s (using module %s)"
+msgstr "丕賱賵丕噩賴丞 %s (亘丕爻鬲禺丿丕賲 丕賱賵丨丿丞 %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "丕爻鬲毓丕丿丞 賲賳 丕賱賰鬲丕賱賵睾"
+msgid "Name: %s\n"
+msgstr "丕賱廿爻賲: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "丕爻鬲毓乇囟 丕賱賶 賲爻鬲賵丿毓 丕爻鬲毓丕丿丞 噩丿賷丿."
+msgid "Generating preview ..."
+msgstr "噩丕乇賷 鬲賵賱賷丿 丕賱賲毓丕賷賳丞 ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "丕賱賯乇氐 賮賷 丕賱賲賰丕賳 丕賱氐丨賷丨 - 鬲丕亘毓"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "丕爻鬲毓丕丿丞 賲禺氐氐丞"
+msgid "serial"
+msgstr "serial"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "丕爻鬲毓丿 賰賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "賮卮賱鬲 丕賱廿爻鬲毓丕丿丞..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "丕賱噩賵乇噩賷丞賾 (丕賱鬲氐賲賷賲 丕賱賱丕鬲賷賳賷)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "丕賱賲賱賮丕鬲 丕賱賲爻鬲毓丕丿丞..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "賷購丨鬲丕噩 丕賱賶 賲爻丕乇 兀賵 賵丨丿丞"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"賷賲賰賳賰 丕賱丌賳 丕毓胤丕亍 丕賱禺賷丕乇丕鬲 賱賱賵丨丿丞 %s.\n"
+"賱丕丨馗 兀賳 兀賷 毓賳賵丕賳 賷噩亘 丕丿禺丕賱賴 賲爻亘賵賯丕賸 亘賭 0x 賲孬賱 '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "賷購丨鬲丕噩 丕賱賶 丕爻賲 丕賱賲爻鬲囟賷賮"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "賷購丨鬲丕噩 丕賱賶 丕爻賲 丕賱賲爻鬲禺丿賲"
+msgid "Kenya"
+msgstr "賰賷賳賷丕"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "賷購丨鬲丕噩 丕賱賶 賰賱賲丞 丕賱賲乇賵乇"
+msgid "Use ``Unmount'' first"
+msgstr "丕爻鬲禺丿賲 ``丕夭丕賱丞 丕賱鬲丨賲賷賱'' 兀賵賱丕"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "賵丨丿丞 兀賵 賲爻丕乇 丕賱賲爻鬲囟賷賮"
+msgid "Installing mtools packages..."
+msgstr "噩丕乇賷 鬲孬亘賷鬲 丨夭賲 mtools"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "丕爻賲 丕賱賲爻鬲囟賷賮"
+msgid "You must specify a root partition"
+msgstr "賷噩亘 毓賱賷賰 鬲丨丿賷丿 鬲賯爻賷賲 噩匕乇"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "丕爻鬲毓丿 毓賳 胤乇賷賯 亘乇賵鬲賵賰賵賱 丕賱卮亘賰丞: %s"
+msgid "first step creation"
+msgstr "丕賳卮丕亍 丕賱禺胤賵丞 丕賱兀賵賱賶"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "丕爻鬲毓丕丿丞 毓賳 胤乇賷賯 丕賱卮亘賰丞"
+msgid "Both Shift keys simultaneously"
+msgstr "賲賮鬲丕丨賷賾 Shift 賮賷 賳賮爻 丕賱賵賯鬲"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "毓賱丕賲丞 丕賱卮乇賷胤 賱賷爻鬲 丕賱毓賱丕賲丞 丕賱氐丨賷丨丞. 毓賱丕賲丞 丕賱卮乇賷胤 賴賷 %s."
+msgid "Select a scanner model"
+msgstr "丕禺鬲乇 胤乇丕夭 丕賱賲丕爻丨 丕賱囟賵卅賷"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"兀丿禺賱 丕賱卮乇賷胤 亘丕賱毓賱丕賲丞 %s\n"
-" 賮賷 噩賴丕夭 丕賱卮乇賷胤 %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "丕爻鬲毓丕丿丞 賲賳 丕賱卮乇賷胤"
+msgid "Drakbackup Configuration"
+msgstr "廿毓丿丕丿丕鬲 Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "毓賱丕賲丞 丕賱賯乇氐 賱賷爻鬲 丕賱毓賱丕賲丞 丕賱氐丨賷丨丞. 毓賱丕賲丞 丕賱賯乇氐 賴賷 %s."
+msgid "Save as.."
+msgstr "丨賮馗 亘廿爻賲.."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"兀丿禺賱 丕賱賯乇氐 丕賱賲丿賲噩 亘丕賱毓賱丕賲丞 %s\n"
-" 賮賷 爻賵丕賯丞 丕賱賯乇氐 丕賱賲丿賲噩 鬲丨鬲 賳賯胤丞 丕賱鬲丨賲賷賱 /mnt/cdrom"
+"賱賲 賷鬲賲 鬲賴賷卅丞 丕賱賵丕噩賴丞 亘毓丿.\n"
+"賯賲 亘鬲卮睾賷賱 賲毓丕賱噩 丕賱鬲賴賷卅丞 賮賷 丕賱賳丕賮匕丞 丕賱乇卅賷爻賷丞"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "丕爻鬲毓丕丿丞 賲賳 丕賱賯乇氐 丕賱賲丿賲噩"
+msgid "Korea (North)"
+msgstr "賰賵乇賷丕 丕賱卮賲丕賱賷丞"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 睾賷乇 賲賵噩賵丿丞 毓賱賶 %s"
+msgid "Autologin"
+msgstr "丿禺賵賱 丌賱賷"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"睾賷賾乇\n"
-"賲爻丕乇 丕賱廿爻鬲毓丕丿丞"
+msgid "System configuration"
+msgstr "鬲賴賷卅丞 丕賱賳馗丕賲"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "賰賱賲丞 丕賱賲乇賵乇 賱賲丿賷乇 丕賱賳胤丕賯"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"丕爻鬲毓丿 丕賱賲賱賮丕鬲\n"
-"丕賱賲禺鬲丕乇丞"
+"賷賵賮乇 Mandrake Linux 9.1 11 賵丕噩賴丞 丕爻鬲禺丿丕賲 賷賲賰賳 鬲毓丿賷賱賴丕 賰丕賲賱丞賸: 賰賷丿賷 3, 噩賳賵賲 2, "
+"WindowsMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "噩丕乇賷 廿毓丿丕丿 丕賱胤丕亘毓丞 ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"丕爻鬲毓丿 賲丿禺賱\n"
-"丕賱賰鬲丕賱賵睾 丕賱賲禺鬲丕乇"
+"賱賱鬲兀賰丿 賲賳 氐丨丞 丕賱亘賷丕賳丕鬲 亘毓丿 丕毓丕丿丞 鬲丨噩賷賲 丕賱鬲噩夭卅丕鬲, \n"
+"爻賷鬲賲 丕賱丿賯賷賯 毓賱賶 賳馗丕賲 丕賱賲賱賮丕鬲 毓賳丿 丕賱鬲卮睾賷賱 丕賱賯丕丿賲 賱賭 Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "丕丨匕賮 兀丿賱丞 丕賱賲爻鬲禺丿賲賷賳 賯亘賱 丕賱廿爻鬲毓丕丿丞"
+msgid "MB"
+msgstr "賲賷睾丕亘丕賷鬲"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "賯賲 亘賳爻禺 丕丨鬲賷丕胤賷 噩丿賷丿 賮亘賱 丕賱廿爻鬲毓丕丿丞 (賮賯胤 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賲鬲丿乇噩丞)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "if set to yes, run some checks against the rpm database."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "丕禺鬲乇 賲爻丕乇 丕賱廿爻鬲毓丕丿丞 (亘丿賱丕賸 賲賳 / )"
+msgid "Virgin Islands (British)"
+msgstr "丕賱噩夭乇 丕賱毓匕乇丕亍 (亘乇賷胤丕賳賷丕)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "丕爻鬲毓丿 丌禺乇"
+msgid "Bermuda"
+msgstr "亘乇賲賵丿丕"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "兀毓丿 丕賱賲爻鬲禺丿賲賷賳 "
+msgid "click here if you are sure."
+msgstr "丕囟睾胤 賴賳丕 廿匕丕 賰賳鬲 賲鬲兀賰丿丕."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "丕爻鬲毓丿 丕賱賳賾馗丕賲"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"賱賲 賷鬲賲 丕賷噩丕丿 賲賱賮 鬲賴賷卅丞 \n"
+"賮囟賱丕 丕囟睾胤 賲毓丕賱噩 賱兀賵 賲鬲賯丿賲."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"賮賷 丕賱兀毓賱賶 爻鬲噩丿 鬲賯爻賷賲丕鬲 賱賷賳賰爻 丕賱賲賵噩賵丿丞 賵 丕賱鬲賷 鬲賲 丕賷噩丕丿賴丕 毓賱賶 丕賱賯乇氐 丕賱氐賱亘 "
+"丕賱禺丕氐 亘賰.\n"
+"賷賲賰賳賰 兀賳 鬲購亘賯賷 廿禺鬲賷丕乇丕鬲 丕賱賲毓丕賱噩, 賵 賴賷 噩賷丿丞 賱兀睾賱亘 兀賳賵丕毓 丕賱鬲孬亘賷鬲.\n"
+"廿匕丕 賯賲鬲 亘毓賲賱 兀賷 鬲睾賷賷乇丕鬲 賮賷噩亘 毓賱賷賰 兀賳 鬲毓乇賮 丕賱鬲賯爻賷賲 丕賱噩匕乇 (\"/\"). 賱丕 鬲禺鬲乇\n"
+"鬲賯爻賷賲丕鬲 囟睾賷乇丞 噩丿丕 賵 廿賱丕 賱賳 鬲爻鬲胤賷毓 鬲孬亘賷鬲 亘乇丕賲噩 賰丕賮賷丞. 廿匕丕 賰賳鬲 鬲乇賷丿 鬲禺夭賷賳 "
+"丕賱亘賷丕賳丕鬲\n"
+"毓賱賶 鬲賯爻賷賲 賲爻鬲賯賱 賮爻鬲丨鬲丕噩 丕賱賶 毓賲賱 鬲賯爻賷賲 賱賭\"/home\"\n"
+"(賲賲賰賳 賮賯胤 廿匕丕 賰丕賳 賱丿賷賰 兀賰孬乇 賲賳 鬲賯爻賷賲 賱賱賷賳賰爻).\n"
+"\n"
+"賰賱 鬲賯爻賷賲 賲購毓胤賶 亘丕賱爻賰賱 丕賱鬲丕賱賷: \"丕賱廿爻賲\", \"丕賱爻毓丞\".\n"
+"\n"
+"\"丕賱廿爻賲\" 賲乇賰亘 亘丕賱爻賰賱 丕賱鬲丕賱賷: \"賳賵毓 丕賱賯乇氐 丕賱氐賱亘\", \"乇賯賲 丕賱賯乇氐 丕賱氐賱亘\",\n"
+"\"乇賯賲 丕賱鬲賯爻賷賲\" (賲孬賱丕, \"hda1\").\n"
+"\n"
+"\"乇賯賲 丕賱賯乇氐 丕賱氐賱亘\" 丿丕卅賲丕 賴賵 丨乇賮 亘毓丿 \"hd\" 兀賵 \"sd\". 亘丕賱賳爻亘丞 賱賱兀賯乇丕氐 "
+"丕賱氐賱亘丞\n"
+"賲賳 賳賵毓 IDE 賮廿賳:\n"
+" * \"a\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱兀爻丕爻賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱兀爻丕爻賷\",\n"
+"\n"
+" * \"b\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱孬丕賳賵賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱兀爻丕爻賷\",\n"
+"\n"
+" * \"c\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱兀爻丕爻賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱孬丕賳賵賷\",\n"
+"\n"
+" * \"d\" 鬲毓賳賷 \"丕賱賯乇氐 丕賱氐賱亘 丕賱孬丕賳賵賷 毓賱賶 賲鬲丨賰賲 IDE 丕賱孬丕賳賵賷\",\n"
+"\n"
+"兀賲丕 亘丕賱賳爻亘丞 賱兀賯乇丕氐 爻賰夭賷 SCSI 賮丕賱丨乇賮 \"a\" 賷毓賳賷 \"兀賯賱 賲毓乇賮 SCSI\", 賵 丕賱丨乇賮 \"b"
+"\"\n"
+"賷毓賳賷 \"孬丕賳賷 兀賯賱 賲毓乇賮 SCSI\", 丕賱禺."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "賵爻賷胤 丌禺乇"
+msgid "Remove"
+msgstr "丕丨匕賮"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "丕禺鬲乇 賵爻賷胤 丌禺乇 賱賱丕爻鬲毓丕丿丞 賲賳賴"
+msgid "Lesotho"
+msgstr "賱賷爻賵鬲賵"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "賮囟賱丕賸 兀丿禺賱 丕賱丿賱賷賱 丕賱賲賵噩賵丿丞 賮賷賴 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "丕爻鬲毓丿 賲賳 丕賱賯乇氐 丕賱氐賱亘"
+msgid "Pipe job into a command"
+msgstr "丨賵賾賱 丕賱賵馗賷賮丞 丕賱賶 丕賱兀賲乇"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "丕爻鬲禺丿賲 quota 賱賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "丕爻 賲丕賱噩賴丕夭 丕賱丿賷賳丕賲賷賰賷 丕賱噩丿賷丿 丕賱匕賷 賷鬲賲 鬲賵賱賷丿賴 賲賳 devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕賱丨噩賲 丕賱兀賯氐賶\n"
-" 丕賱賲爻賲賵丨 亘賴 賱賭Drakbackup"
+msgid "Yes"
+msgstr "賳毓賲"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "丕禺鬲乇 丕賱丿賱賷賱 丕賱匕賷 爻賷鬲賲 丨賮馗賴:"
+msgid "Cote d'Ivoire"
+msgstr "賰賵鬲 丿賷賮賵丕乇"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "丕爻鬲禺丿賲 丕賱賯乇氐 丕賱氐賱亘 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+msgid "Which protocol do you want to use?"
+msgstr "賲丕 賴賵 丕賱亘乇賵鬲賵賰賵賱 丕賱匕賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴責"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "乇噩丕亍 丕禺鬲乇 鬲丕乇賷禺 丕賱廿爻鬲毓丕丿丞"
+msgid "Restore Progress"
+msgstr "鬲賯丿賲 丕賱廿爻鬲毓丕丿丞"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲 賯亘賱:"
+msgid "Estonia"
+msgstr "丕爻鬲賵賳賷丕"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "賯丕卅賲丞 丕賱賲爻鬲禺丿賲賷賳 丕賱匕賷賳 爻賷鬲賲 丕爻鬲毓丕丿鬲賴賲"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "丕禺鬲乇 丕賱賲爻鬲囟賷賮 丕賱鬲賷 賷噩亘 兀賳 鬲鬲賵賮乇 賱賴 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲丨賱賷丞:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "丕囟睾胤 賲賵丕賮賯 賱丕爻鬲毓丕丿丞 賲賱賮丕鬲 丕禺乇賶"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"鬲賵噩丿 賲爻丕丨丞 賮丕乇睾丞 賮賷 噩丿賵賱 丕賱鬲噩夭卅丕鬲 賱丿賷賰 賱賰賳賷 賱丕 兀爻鬲胤賷毓 丕爻鬲禺丿丕賲賴丕.\n"
+"丕賱丨賱 丕賱賵丨賷丿 賴賵 兀賳 鬲賳賯賱 丕賱鬲噩夭卅丕鬲 丕賱兀爻丕爻賷丞 賱鬲丨氐賱 毓賱賶 丕賱賲爻丕丨丞 亘賷賳 丕賱鬲噩夭卅丕鬲 "
+"丕賱賲賲鬲丿丞."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " 鬲賴賷卅丞 丕賱廿爻鬲毓丕丿丞 "
+msgid "Channel"
+msgstr "丕賱賯賳丕丞"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " 鬲賲鬲 丕賱廿爻鬲毓丕丿丞 亘賳噩丕丨 毓賱賶 %s "
+msgid "Add"
+msgstr "丕囟丕賮丞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲禺鬲丕乇丞 鬲賲 "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "賱賲 賷鬲賲 丕毓丿丕丿 兀賷 賲卮丕乇賰丞 丕鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賮丕爻丿丞"
+msgid " Error while sending mail. \n"
+msgstr " 禺胤兀 兀孬賳丕亍 丕乇爻丕賱 丕賱亘乇賷丿. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "賮囟賱丕賸 賯賲 亘廿夭丕賱丞 丕賱鬲兀卮賷乇 兀賵 丕丨匕賮賴丕 賮賷 丕賱賲乇丞 丕賱賯丕丿賲丞."
+msgid "Keyboard"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"賯丕卅賲丞 亘丕賱亘賷丕賳丕鬲 丕賱賮丕爻丿丞:\n"
-"\n"
+"兀丿禺賱 丕賱賯乇氐 丕賱賲丿賲噩 亘丕賱毓賱丕賲丞 %s\n"
+" 賮賷 爻賵丕賯丞 丕賱賯乇氐 丕賱賲丿賲噩 鬲丨鬲 賳賯胤丞 丕賱鬲丨賲賷賱 /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"賯丕卅賲丞 丕賱亘賷丕賳丕鬲 丕賱鬲賷 爻賷鬲賲 丕爻鬲乇噩丕毓賴丕:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "賱丕 鬲賴賷卅丞, 丕囟睾胤 賲毓丕賱噩 兀賵 賲鬲賯丿賲.\n"
+msgid "Choose the connection you want to configure"
+msgstr "丕禺鬲乇 丕賱賵氐賱丞 丕賱鬲賷 鬲乇賷丿 鬲賴賷卅鬲賴丕"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "丕賳鬲馗乇 賲賳 賮囟賱賰, 噩丕乇賷 鬲毓賷賷賳 賲爻鬲賵賶 丕賱兀賲賳.."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 賴賷 丕賱亘賷卅丞 丕賱兀賲孬賱 賱鬲胤賵賷乇 丕賱亘乇丕賲噩"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 SSH.\n"
+msgid "Configuring network device %s"
+msgstr "噩丕乇賷 鬲賴賷卅丞 噩賴丕夭 丕賱卮亘賰丞 %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 FTP.\n"
+msgid "activated"
+msgstr "賲賳卮賾胤"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-丕賱卮乇賷胤 \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "丕禺鬲乇 賵丕噩賴丞 丕賱卮亘賰丞 丕賱鬲賷 爻賷鬲賲 丕爻鬲禺丿丕賲賴丕 賱禺丕丿賲 DHCP."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-丕賱賯乇氐 丕賱賲丿賲噩.\n"
+msgid "Finding packages to upgrade..."
+msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 丕賱丨夭賲 丕賱鬲賷 爻鬲鬲賲 鬲乇賯賷鬲賴丕..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-丕賱賯乇氐 丕賱氐賱亘.\n"
+msgid "Mount point: "
+msgstr "賳賯胤丞 丕賱鬲丨賲賷賱: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon (%s) include :\n"
+msgid "parse all fonts"
+msgstr "鬲丨賱賷賱 賰賱 丕賱禺胤賵胤"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\t丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 鬲爻鬲禺丿賲 tar 賵 gzip\n"
+msgid "With X"
+msgstr "賲毓 X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 鬲爻鬲禺丿賲 tar 賵 bzip2\n"
+msgid "Multi-head configuration"
+msgstr "廿毓丿丕丿 賲鬲毓丿丿 丕賱乇丐賵爻"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\t賱丕 鬲購囟賲賳 賲賱賮丕鬲 丕賱賳馗丕賲\n"
+msgid "No browser available! Please install one"
+msgstr "賱丕 賷賵噩丿 賲鬲氐賮丨 賲鬲賵賮乇! 賮囟賱丕賸 賯賲 亘鬲孬亘賷鬲 賲鬲氐賮丨"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"賴賱 鬲乇賷丿 丨賮馗 丕賱鬲睾賷賷乇丕鬲責\n"
+"丕賱廿毓丿丕丿 丕賱丨丕賱賷 賴賵:\n"
"\n"
-"- 禺賷丕乇丕鬲:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t 丕爻賲 丕賱賲爻鬲禺丿賲: %s\n"
-"\t\t 毓賱賶 丕賱賲爻丕乇: %s\n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 ReiserFS 賱賱鬲噩夭卅丕鬲 兀氐睾乇 賲賳 32 賲賷睾丕亘丕賷鬲"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- 丕丨賮馗 毓亘乇 %s 毓賱賶 丕賱賲爻鬲囟賷賮: %s\n"
+"亘乇賵鬲賵賰賵賱 rwho 賷爻賲丨 賱賱賲爻鬲禺丿賲賷賳 丕賱亘毓賷丿賷賳 亘丕賱丨氐賵賱 毓賱賶 賯丕卅賲丞 亘賰賱 丕賱賲爻鬲禺丿賲賷賳\n"
+"丕賱匕賷賳 爻噩賱賵丕 丕賱丿禺賵賱 丕賱賶 噩賴丕夭 賷卮睾賾賱 賲乇丕賯亘 rwho (賲賲丕孬賱 賱賭 finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "丕爻賲 丕賱賳胤丕賯"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- 丕丨賮馗 丕賱賶 丕賱卮乇賷胤 毓賱賶 丕賱噩賴丕夭: %s"
+msgid "Sharing of local printers"
+msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (賲鬲毓丿丿 丕賱噩賱爻丕鬲)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " 毓賱賶 丕賱噩賴丕夭: %s"
+msgid "Available printers"
+msgstr "丕賱胤丕亘毓丕鬲 丕賱賲鬲賵賮乇丞"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "賮丕乇睾"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- 丕賳爻禺 丕賱賶 賯乇氐 賲丿賲噩"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- 丕丨匕賮 賰賱 賲賱賮丕鬲 tar 丕賱禺丕氐丞 亘丕賱賯乇氐 丕賱氐賱亘 亘毓丿 賰賱 毓賲賱賷丞 賳爻禺.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- 丕丨賮馗 毓賱賶 丕賱賯乇氐 丕賱氐賱亘 毓賱賶 丕賱賲爻丕乇:%s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"-丕賱賲賱賮賾丕鬲 丕賱兀禺乇賶:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
-msgstr ""
"\n"
-"-賲賱賮賾丕鬲 丕賱賲爻鬲禺丿賲:\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "毓乇囟 丕賱賳氐"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "兀賷賳 鬲乇賷丿 鬲丨賲賷賱 丕賱噩賴丕夭 %s責"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "丕賱廿賷噩丕乇 丕賱廿賮鬲乇丕囟賷 (亘丕賱孬賵丕賳賷)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "丕賱賵丕噩賴丞 \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "賲毓 賵孬丕卅賯 丕賱賲爻丕毓丿丞 丕賱兀爻丕爻賷丞 (賲賮囟賾賱)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "夭乇 賵丕丨丿"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"-賲賱賮賾丕鬲 丕賱賳賾馗丕賲 :\n"
+"鬲賵噩丿 %d 胤丕亘毓丕鬲 睾賷乇 賲毓乇賵賮丞 賲鬲氐賱丞 賲亘丕卮乇丞賸 亘賳馗丕賲賰"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "丕禺鬲亘丕乇"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"賲氐丕丿乇 丕賱賲爻丕毓丿 :\n"
+"Allow/Forbid direct root login."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "丕禺鬲乇丕賱賲爻鬲禺丿賲 賷丿賵賷賾賸丕"
+msgid "Korea"
+msgstr "賰賵乇賷丕"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "賲爻鬲禺丿賲賵 丕賱賲爻丕毓丿"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Your choice? (default `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "賳馗丕賲 丕賱賲爻丕毓丿"
+msgid "Raw printer"
+msgstr "胤丕亘毓丞 禺丕賲"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "乇噩丕亍 丕禺鬲乇 賲丕 鬲乇賷丿 賳爻禺賴 丕丨鬲賷丕胤賷丕賸"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "丕賱廿爻賲 丕賱乇爻賲賷 賱賲氐賳賾毓 丕賱賲毓丕賱噩"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "毓賱賶 丕賱卮乇賷胤"
+msgid "Vendor"
+msgstr "丕賱賲氐賳毓"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "毓賱賶 丕賱賯乇氐 丕賱賲丿賲噩"
+msgid "Interface %s"
+msgstr "丕賱賵丕噩賴丞 %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "毓亘乇 丕賱卮賾亘賰丞"
+msgid "Configure mouse"
+msgstr "廿毓丿丕丿 丕賱賮兀乇丞"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "毓賱賶 丕賱賯乇氐 丕賱氐賾賱亘"
+msgid "Choose the mount points"
+msgstr "丕禺鬲乇 賳賯丕胤 丕賱鬲丨賲賷賱"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "乇噩丕亍 丕禺鬲乇 兀賷賳 鬲乇賷丿 丕賱賳爻禺 丕賱丕丨鬲賷丕胤賷."
+msgid "OK"
+msgstr "賲賵丕賮賯"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "禺賷丕乇丕鬲 兀賰孬乇"
+msgid "Yugoslavian (latin)"
+msgstr "丕賱賷賵睾賵爻賱丕賮賷丞 (賱丕鬲賷賳賷)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "賲鬲賶 "
+msgid "Installing"
+msgstr "噩丕乇賷 丕賱鬲孬亘賷鬲"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "兀賷賳"
+msgid "Launch userdrake"
+msgstr "卮睾賾賱 userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "賲丕匕丕 "
+msgid "Is this an install or an upgrade?"
+msgstr "賴賱 賴匕丕 鬲孬亘賷鬲 兀賲 鬲乇賯賷丞責"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "丕賱睾 賲賱賮丕鬲 tar 丕賱禺賱氐丞 亘丕賱賯乇氐 鬲丕氐賱亘 亘毓丿 丕賱賳爻禺 丕賱賶 賵爻賷胤 丌禺乇."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "亘胤丕賯丞 ISDN 丿丕禺賱賷丞"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "兀乇爻賱 鬲賯乇賷乇丕賸 亘乇賷丿賷丕賸 亘毓丿 賰賱 毓賲賱賷丞 賳爻禺 丕賱賶:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"賱賲卮丕乇賰鬲賳丕 亘賲毓乇賮鬲賰 賵 賱賱賲爻丕毓丿丞 賮賷 亘賳丕亍 兀丿賵丕鬲 賱賷賳賰爻, 丕賳囟賲 丕賱賶 賲賳鬲丿賷丕鬲 丕賱賳賯丕卮 "
+"丕賱鬲賷 爻鬲噩丿賴丕 賮賷 氐賮丨丞 \"Community\" 毓賱賶 賲賵賯毓賳丕"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"鬲兀賰丿 賲賳 兀賳 賲乇丕賯亘 cron 賲賵噩賵丿 囟賲賳 禺丿賲丕鬲 丕賱賳馗丕賲. \n"
+"鬲賴丕賳賷賳丕, 丕賳鬲賴鬲 鬲賴賷卅丞 丕賱卮亘賰丞 賵 丕賱廿賳鬲乇賳鬲.\n"
+"爻賷鬲賲 鬲胤亘賷賯 丕賱鬲賴賷卅丞 毓賱賶 賳馗丕賲賰 丕賱丌賳.\n"
"\n"
-"賱丕丨馗 兀賳 賰賱 賵爻丕卅胤 丕賱卮亘賰丞 鬲爻鬲禺丿賲 丕賱賯乇氐 丕賱氐賱亘."
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-丕賱賯乇氐 丕賱氐賱亘.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"乇噩丕亍 丕禺鬲乇\n"
-"賵爻賷胤 丕賱賳爻禺 丕賱丕丨鬲賷丕胤賷"
+"賷鬲賲 鬲賳卮賷胤 賴匕賴 丕賱禺胤賵丞 賮賯胤 丕匕丕 鬲賲 丕賷噩丕丿 鬲噩夭卅丞 賱賷賳賰爻 賯丿賷賲丞\n"
+"毓賱賶 噩賴丕夭賰.\n"
+"\n"
+"賷丨鬲丕噩 DrakX 丕?賳 丕賱賶 兀賳 賷毓賱賲 丕匕丕 賰賳鬲 鬲乇賷丿 丕賱鬲孬亘賷鬲 賲賳 丕賱氐賮乇 兀賵\n"
+"鬲乇賷丿 鬲乇賯賷丞 賳馗丕賲 Mandrake Linux 丕賱賲賵噩賵丿 賱丿賷賰 賲爻亘賯丕賸:\n"
+"\n"
+" * \"鬲孬亘賷鬲\": 賮賷 丕?睾賱亘 鬲賯賵賲 亘丕夭丕賱丞 丕賱賳馗丕賲 丕賱賯丿賷賲\n"
+"賰賱賷丕賸. 丕匕丕 賰賳鬲 鬲乇賷丿 鬲睾賷賷乇 鬲噩夭卅丕鬲 丕賱賯乇氐 丕賱氐賱亘, 兀賵 鬲乇賷丿\n"
+"鬲睾賷賷乇 賳馗丕賲 丕賱賲賱賮丕鬲, 毓賱賷賰 丕禺鬲賷丕乇 賴匕丕 丕賱禺賷丕乇. 毓賲賵賲丕賸 丕毓鬲賲丕丿丕\n"
+"毓賱賶 賰賷賮賷丞 鬲噩夭卅丞 丕賱賯乇氐 丕賱氐賱亘 賱丿賷賰. 賷賲賰賳賰 賲賳毓 丕夭丕賱丞 亘毓囟\n"
+"亘賷丕賳丕鬲賰 丕賱賲賵噩賵丿丞 賲爻亘賯丕賸.\n"
+" * \"鬲乇賯賷丞\": 賮卅丞 丕賱鬲孬亘賷鬲 賴匕賴 鬲爻賲丨 賱賰 亘鬲丨丿賷孬 丕賱丨夭賲\n"
+"毓賱賶 賳馗丕賲 Mandrake Linux 丕賱禺丕氐 亘賰. 賱賳 賷鬲賲 鬲睾賷賷乇\n"
+"亘賷丕賳丕鬲賰 兀賵 鬲賯爻賷賲丕鬲 丕賱賯乇氐 丕賱氐賱亘. 兀睾賱亘 禺胤賵丕鬲 丕賱鬲賴賷卅丞 丕?禺乇賶\n"
+"賱丕 鬲夭丕賱 賲賵噩賵丿丞, 賲孬賱 丕賱鬲孬亘賷鬲 丕賱丕毓鬲賷丕丿賷.\n"
+"\n"
+"丕爻鬲禺丿丕賲 禺賷丕乇 ``丕賱鬲乇賯賷丞'' 賷噩亘 兀賳 賷毓賲賱 亘卮賰賱 噩賷丿 毓賱賶\n"
+"丕氐丿丕乇丕鬲 Mandrake Linux \"8.1\" 兀賵 賲丕 賮賵賯. ? 賷賳氐丨 亘丕賱鬲乇賯賷丞\n"
+"賲賳 丕氐丕丿乇丕鬲 Mandrake Linux 賯亘賱 \"8.1\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 CUPS 亘毓賷丿"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"賮囟賱丕 丕禺鬲乇 丕賱賮鬲乇丞 \n"
-"賲丕 亘賷賳 賰賱 毓賲賱賷丞 賳爻禺 丕丨鬲賷丕胤賷"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "鬲毓匕乇 丨匕賮 丕賱胤丕亘毓丞 \"%s\" 賲賳 Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "丕爻鬲禺丿賲 丕賱賲乇丕賯亘"
+msgid "delete"
+msgstr "丨匕賮"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "卮賴乇賷丕"
+msgid "here if no."
+msgstr "廿囟睾胤 賴賳丕 廿匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "兀爻亘賵毓賷賾丕"
+msgid "DHCP host name"
+msgstr "丕爻賲 賲爻鬲囟賷賮 DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "賷賵賲賷賾丕賸"
+msgid "The maximum lease (in seconds)"
+msgstr "丕賱廿賷噩丕乇 丕賱兀賯氐賶 (亘丕賱孬賵丕賳賷)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "賰賱賾 爻丕毓丞 "
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱賲賳賮匕 丕賱鬲爻賱爻賱賷 丕賱賲賵氐賱丞 亘賴 丕賱賮兀乇丞"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
+msgid "Did it work properly?"
+msgstr "賴賱 毓賲賱鬲 亘丕賱卮賰賱 丕賱氐丨賷丨責"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "賮賯賷乇"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱丿賱賷賱 丕賱匕賷 爻賷鬲賲 丕賱丨賮馗 賮賷賴:"
+msgid "The DHCP start range"
+msgstr "丨丿賵丿 DHCP start"
-# c-format
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 丕禺乇丕噩 丕賱卮乇賷胤 亘毓丿 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
+msgid "Grenada"
+msgstr "毓乇賷賳丕丿丕"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 賲爻丨 丕賱卮乇賷胤 賯亘賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
+msgid "Unsafe"
+msgstr "睾賷乇 丌賲賳"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s 賯胤丕毓"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "賱丕"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 丕爻鬲禺丿丕賲 噩賴丕夭 睾賷乇 賯丕亘賱 賱賱乇噩賵毓 丕賱賶 丕賱禺賱賮."
+"丕匕丕 賰丕賳鬲 胤丕亘毓鬲賰 噩賴丕夭丕賸 賲鬲毓丿丿 丕賱賵馗丕卅賮 賲賳 HP 兀賵 Sony (OfficeJet, PSC, LaserJet "
+"1100/1200/1220/3200/3300 賲毓 賲丕爻丨 囟賵卅賷, Sony IPJ-V100) 兀賵 噩賴丕夭 HP PhotoSmart "
+"兀賵 HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "賮囟賱丕賸 兀丿禺賱 丕爻賲 噩賴丕夭 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+msgid "Guadeloupe"
+msgstr "睾賵丕丿賷賱賵亘"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use tape to backup"
-msgstr "丕爻鬲禺賲 丕賱卮乇賷胤 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+msgid "could not find any font.\n"
+msgstr "賱賲 兀鬲賲賰賳 賲賳 廿賷噩丕丿 兀賷 禺胤.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "No CD device defined!"
-msgstr "賱賲 賷鬲賲 鬲毓乇賷賮 噩賴丕夭 賯乇氐 賲丿賲噩!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "賴賱 鬲乇賷丿 兀賳 賷賯賵賲 夭乇 BackSpace 亘毓賲賱 賵馗賷賮丞 夭乇 Delete 賮賷 爻胤乇 丕賱兀賵丕賲乇責"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕爻賲 噩賴丕夭 賳爻禺 丕賱兀賯乇丕氐\n"
-" 賲孬丕賱: 0,1,0"
+msgid "Vertical refresh rate"
+msgstr "賳爻亘丞 丕賱廿賳毓丕卮 丕賱乇兀爻賷"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 噩賴丕夭 DVDRAM"
+msgid "Entering step `%s'\n"
+msgstr "Entering step `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 噩賴丕夭 DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " 丕賲丨賽 丕賱丌賳 "
+msgid "Removing %s ..."
+msgstr "噩丕乇賷 丨匕賮 %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr ""
-"賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲乇賷丿 賲爻丨 丕賱賵爻賷胤 丕賱賯丕亘賱 賱廿毓丕丿丞 丕賱賰鬲丕亘丞 (丕賱噩賱爻丞 "
-"丕賱兀賵賱賶)"
+msgid "Niger"
+msgstr "丕賱賳賷噩乇"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 賵爻賷胤 CDRW"
+msgid "No printer"
+msgstr "賱丕 胤丕亘毓丞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 賯乇氐 賲丿賲噩 賲鬲毓丿丿 丕賱噩賱爻丕鬲"
+msgid "alert configuration"
+msgstr "廿毓丿丕丿丕鬲 丕賱鬲賳亘賷賴"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "賮囟賱丕賸 丕禺鬲乇 賲爻丕丨丞 賵爻賷胤 CD/DVD (亘丕賱賲賷睾丕亘丕賷鬲)"
+msgid "NetWare Printer Options"
+msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"賮囟賱丕賸 丕禺鬲乇 噩賴丕夭 CD/DVD 丕賱禺丕氐 亘賰\n"
-"(丕囟睾胤 丕丿禺丕賱 賱賳卮乇 丕賱廿毓丿丕丿丕鬲 賱丨賯賵賱 兀禺乇賶.\n"
-"賴匕丕 丕賱丨賯賱 賱賷爻 囟乇賵乇賷丕賸, 丕賳賴 賲噩乇丿 兀丿丕丞 賱賲賱亍 丕賱廿爻鬲賲丕乇丞.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) 賲毓丕賷賳丞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "丕爻鬲禺丿賲 CD/DVDROM 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+msgid "General"
+msgstr "毓丕賲"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "賷購丨鬲丕噩 丕賱賶 丕爻賲 丕賱賲爻鬲囟賷賮 賵 丕爻賲 丕賱賲爻鬲禺丿賲 賵 賰賱賲丞 丕賱賲乇賵乇!"
+msgid "Printing system: "
+msgstr "賳馗丕賲 丕賱胤亘丕毓丞: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "鬲匕賰賾乇 賰賱賲丞 丕賱爻乇 賴匕賴"
+msgid "Add a user"
+msgstr "兀囟賮 賲爻鬲禺丿賲"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "乇噩丕亍 賰賱賲丞 丕賱賲乇賵乇"
+msgid "Network configuration (%d adapters)"
+msgstr "丕毓丿丕丿丕鬲 丕賱卮亘賰丞 (%d 賲賵丕卅賲丕鬲)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "乇噩丕亍 兀丿禺賱 丕爻賲 丕賱丿禺賵賱"
+msgid "Mandatory package %s is missing"
+msgstr "丕賱丨夭賲丞 丕賱囟乇賵乇賷丞 %s 賲賮賯賵丿丞"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕賱丿賱賷賱 (兀賵 丕賱賵丨丿丞) 丕賱鬲賷 爻賷鬲賲 賮賷賴丕 賵囟毓\n"
-" 丕賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞 毓賱賶 賴匕丕 丕賱賲爻鬲囟賷賮."
+msgid "Philippines"
+msgstr "丕賱賮賷賱賷亘賷賳"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "賮囟賱丕 兀丿禺賱 丕爻賲 丕賱賲爻鬲囟賷賮 兀賵 毓賳賵丕賳 IP."
+msgid "Ok"
+msgstr "賲賵丕賮賯"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"賲賮丕鬲賷丨 兀禺乇賶\n"
-"(睾賷乇 drakbackup) 賲賵噩賵丿丞 賲爻亘賯丕賸"
+msgid "Print Queue Name"
+msgstr "丕爻賲 氐賮 丕賱胤丕亘毓丞"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "賴賱 鬲乇賷丿 丕爻鬲禺丿丕賲 aboot責"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "丕賱亘賷賱丕乇賵爻賷丞"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" 丕賳賯賱 \n"
-"丕賱丌賳"
+"PDQ 賷丿毓賲 賮賯胤 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賵 胤丕亘毓丕鬲 LPD 丕賱亘毓賷丿丞 賵 胤丕亘毓丕鬲 Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "丕賳賯賱 丕賱賲賱賮丕鬲 丕賱賶 鬲噩夭卅丞 噩丿賷丿丞"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"丕賳卮卅/賱賳賯賱\n"
-"賲賮丕鬲賷丨 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賱賭SSH"
+"兀丿禺賱 賴賳丕 禺丕丿賲丕鬲 CUPS 丕賱鬲賷 鬲乇賷丿 丕爻鬲禺丿丕賲 胤丕亘毓丕鬲賴丕. 鬲丨鬲丕噩 丕賱賶 毓賲賱 匕賱賰 賮賯胤 丕賳 賱賲 "
+"鬲賯賲 丕賱禺丕丿賲丕鬲 亘賳卮乇 賲毓賱賵賲丕鬲 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱卮亘賰 丕賱賲丨賱賷丞."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "丕爻鬲禺丿賲 Expect 賱賭SSH"
+msgid "Restore From Catalog"
+msgstr "丕爻鬲毓丕丿丞 賲賳 丕賱賰鬲丕賱賵睾"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Net Method:"
+msgid "Pitcairn"
+msgstr "亘賷鬲賰丕賷乇賳"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "丕爻鬲禺丿賲 丕賱廿鬲氐丕賱 亘丕賱卮亘賰丞 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "丕賱賲爻鬲禺丿賲賵賳"
+msgid "group :"
+msgstr "賲噩賲賵毓丞 :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "賮卮賱 鬲丨賲賷賱 丕賱鬲噩夭卅丞 %s 賮賷 丕賱丿賱賷賱 %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "丕爻鬲禺丿賲 丕賱賳爻禺 丕賱鬲乇丕賰賲賷 (賱丕 鬲爻鬲亘丿賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賯丿賷賲丞)"
+msgid "Lilo screen"
+msgstr "卮丕卮丞 Lilo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "丕丨匕賮 丕賱賲丕丿丞 丕賱賲禺鬲丕乇丞"
+msgid "LILO with graphical menu"
+msgstr "LILO 賲毓 賯丕卅賲丞 乇爻賵賲賷丞"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "賱丕 鬲爻鬲禺丿賲 匕丕賰乇丞 丕賱賲鬲氐賮丨 丕賱賲禺亘卅賷丞"
+msgid "Estimating"
+msgstr "噩丕乇賷 丕賱丨爻丕亘 丕賱鬲賯乇賷亘賷"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "乇噩丕亍 丕禺鬲乇 賰賱 丕賱賲爻鬲禺丿賲賷賳 丕賱匕賷賳 鬲乇賷丿 鬲囟賲賷賳賴賲 賮賷 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷."
+msgid "You can't unselect this package. It is already installed"
+msgstr "賱丕 賷賲賰賳 丕夭丕賱丞 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲. 丕賳賴丕 賲孬亘鬲丞 賲爻亘賯丕賸"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"亘賴匕丕 丕賱禺賷丕乇 賷賲賰賳賰 丕爻鬲乇噩丕毓 兀賷 賳爻禺丞 賲賳\n"
-" 丿賱賷賱 /etc 丕賱禺丕氐 亘賰."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", 丕賱胤丕亘毓丞 \"%s\" 毓賱賶 禺丕丿賲 SMB/Windows \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "賱丕 鬲購囟賲賾賳 丕賱賲賱賮丕鬲 丕賱賲賴賲丞 (passws, group,fstab)"
+msgid "Go on anyway?"
+msgstr "賴賱 鬲乇賷丿 丕賱賲鬲丕亘毓丞 毓賱賶 兀賷 丨丕賱責"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "丕爻鬲禺丿賲 丕賱賳爻禺 丕賱鬲乇丕賰賲賷 (賱丕 鬲爻鬲亘丿賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賯丿賷賲丞)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 丕賱丨夭賲 丕賱賲鬲賵賮乇丞 賵 丕毓丿丕丞 亘賳丕亍 賯丕毓丿丞 亘賷丕賳丕鬲 rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲: (丿賱賷賱 /etc)"
+msgid "Does not appear to be recordable media!"
+msgstr "賱丕 賷亘丿賵 賵爻賷胤 賯丕亘賱 賱賱賰鬲丕亘丞!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "賴匕賴 丕賱禺賷丕乇丕鬲 賷賲賰賳賴丕 賳爻禺 賵 丕爻鬲乇噩丕毓 賰賱 丕賱賲賱賮丕鬲 賮賷 丿賱賷賱 /etc.\n"
+msgid "Specify options"
+msgstr "丨丿丿 丕賱禺賷丕乇丕鬲"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "賮丕賳丕鬲賵"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "賷噩亘 丕毓胤丕亍 丕爻賲 丕賱禺丕丿賲 兀賵 乇賯賲 IP 丕賱禺丕氐 亘丕賱禺丕丿賲!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
-"\n"
-"賮囟賱丕賸 賯賲 亘丕賱鬲兀卮賷乇 毓賱賶 丕賱禺賷丕乇丕鬲 丕賱鬲賷 鬲丨鬲丕噩賴丕.\n"
+"賯乇氐 丕賯賱丕毓 賲禺氐氐 賷賵賮乇 胤乇賷賯丞 賱賱賵氐賵賱 丕賱賶 賳馗丕賲 賱賷賳賰爻 丕賱禺丕氐 亘賰 丿賵賳\n"
+"丕賱廿毓鬲賲丕丿 毓賱賶 賲丨賲賾賱 丕賱廿賯賱丕毓 丕賱廿毓鬲賷丕丿賷. 賴匕丕 賲賮賷丿 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 鬲孬亘賷鬲\n"
+"SILO 毓賱賶 賳馗丕賲賰, 兀賵 丕匕丕 兀夭丕賱 賳馗丕賲 鬲卮睾賷賱 丌禺乇 LILO, 兀賵 丕匕丕 賱賲 賷鬲賵丕賮賯 SILO\n"
+"賲毓 鬲賴賷卅丞 賳馗丕賲賰. 賷賲賰賳 賰匕賱賰 丕爻鬲禺丿丕賲 賯乇氐 丕賯賱丕毓 賲禺氐氐 賲毓\n"
+"Mandrake rescue image, 賲賲丕 賷噩毓賱 丕賱賲毓丕賱噩丞 賲賳 丕賳賴賷丕乇丕鬲 丕賱賳馗丕賲 丕賱禺胤賷乇丞 兀賰孬乇 "
+"爻賴賵賱丞.\n"
+"丕匕丕 賰賳鬲 鬲乇賷丿 丕賳卮丕亍 賯乇氐 丕賯賱丕毓 賱賳馗丕賲賰, 兀丿禺賱 賯乇氐 賲乇賳 賮賷 丕賱爻賵丕賯丞\n"
+"丕賱兀賵賱賶 賵 丕囟睾胤 \"賲賵丕賮賯\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "丕禺鬲乇 丕賱賲賱賮丕鬲 兀賵 丕賱兀丿賱丞 孬賲 丕賳賯乇 '兀囟賮'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 賳馗丕賲 賲賱賮丕鬲 賲乇賲賾夭 賱賳賯胤丞 丕賱鬲丨賲賷賱 %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "丕禺鬲賷丕乇 丕賱賲賱賮丕鬲"
+msgid "Norfolk Island"
+msgstr "噩夭賷乇丞 賳賵乇賮賵賱賰"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "鬲毓匕乇 丕賳卮丕亍 丕賱賰鬲丕賱賵睾!"
+msgid "Theme installation failed!"
+msgstr "賮卮賱 鬲孬亘賷鬲 丕賱爻賲丕鬲"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " 禺胤兀 兀孬賳丕亍 丕乇爻丕賱 丕賱亘乇賷丿. \n"
+msgid "Nothing to do"
+msgstr "賱丕 卮賷卅 賱賱毓賲賱"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"賳卮丕胤丕鬲 Drakbackup 毓賳 胤乇賷賯 卮乇賷胤 丕賱鬲禺夭賷賳:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "丕爻鬲禺丿賲 賱賭loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"賳卮丕胤丕鬲 Drakbackup 毓賳 胤乇賷賯 丕賱賯乇氐 丕賱賲丿賲噩:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "兀丿丕丞 鬲賯乇賷乇 丕賱毓賷賵亘 賮賷 Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"賳卮丕胤丕鬲 Drakbackup 毓賳 胤乇賷賯 %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "丕爻鬲禺丿賲 pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "噩丕乇賷 賳賯賱 丕賱賲賱賮丕鬲 丕賱賶 丕賱鬲噩夭卅丞 丕賱噩丿賷丿丞"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s 賲毓 丿毓賲 鬲噩乇賷亘賷 賱賱乇爻賵賲 孬賱丕孬賷丞 丕賱兀亘毓丕丿"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "賲鬲賯丿賲"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "丕賳賯賱"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (爻賵賷丿賷丞)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" 賲卮賰賱丞 賮賷 賵氐賱丞 FTP: 賱賲 賷賰賳 亘丕賱廿賲賰丕賳 丕乇爻丕賱 賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 丕賱禺丕氐丞 亘賰 "
-"亘丕爻鬲禺丿丕賲 FTP.\n"
+msgid "More Options"
+msgstr "禺賷丕乇丕鬲 兀賰孬乇"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "兀賮睾丕賳爻鬲丕賳"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "丕賱睾 賲賱賮丕鬲 tar 丕賱禺賱氐丞 亘丕賱賯乇氐 鬲丕氐賱亘 亘毓丿 丕賱賳爻禺 丕賱賶 賵爻賷胤 丌禺乇."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"賯丕卅賲丞 丕賱賲賱賮丕鬲 丕賱賲乇爻賱丞 賲賳 FTP: %s\n"
-" "
+"cron 賴賵 亘乇賳丕賲噩 UNIX 丕賱賯賷丕爻賷 賱鬲卮睾賷賱 丕賱亘乇丕賲噩 丕賱賲丨丿丿丞 賲賳 賯亘賱 丕賱賲爻鬲禺丿賲\n"
+"毓賳丿 兀丿賵賯丕鬲 賲丨丿丿丞 丿賵乇賷丕賸. vixie cron 賷囟賷賮 毓丿丿丕賸 賲賳 丕賱賲夭丕賷丕 丕賱賶 UNIX\n"
+"cron 丕賱兀爻丕爻賷, 亘賲丕 賮賷賴丕 丨賲丕賷丞 兀賲賳賷丞 兀賮囟賱, 賵 禺賷丕乇丕鬲 鬲賴賷卅丞 兀賯賵賶."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "賱丕 鬲睾賷賷乇丕賳 賱賱賳爻禺丞 丕賱廿丨鬲賷丕胤賷丞!"
+msgid "Burundi"
+msgstr "亘賵乇賵賳丿賷"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賱賱賯乇氐 丕賱氐賱亘..."
+msgid "Add Client -->"
+msgstr "丕囟丕賮丞 毓賲賷賱 -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "丕賳爻禺 賲賱賮丕鬲 兀禺乇賶..."
+msgid "Read carefully!"
+msgstr "丕賯乇兀 噩賷丿丕!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "丕賱鬲賯丿賲 賮賷 賳爻禺 丕賱賯乇氐 丕賱氐賱亘..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賲爻鬲禺丿賲賷賳..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"賮囟賱丕賸,\n"
+"丕胤亘毓 tv norm 丕賱禺丕氐 亘賰 賵 亘賱丿賰"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲..."
+msgid "Port"
+msgstr "丕賱亘賵丕亘丞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "賱丕 賷賵噩丿 卮乇賷胤 賮賷 %s!"
+msgid "No (experts only)"
+msgstr "賱丕 (賱賱禺亘乇丕亍 賮賯胤)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "鬲賵噩丿 賲卮賰賱丞 賮賷 丕賱鬲氐乇賷丨 賱賱賵氐賵賱 丕賱賶 丕賱賯乇氐 丕賱賲丿賲噩."
+msgid "No kernel selected!"
+msgstr "賱賲 賷鬲賲 丕賷噩丕丿 賳賵丕丞!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "賯丿 賷爻鬲睾乇賯 賲爻丨 丕賱賵爻賷胤 亘毓囟 丕賱賵賯鬲."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "賵爻賷胤 睾賷乇 賯丕亘賱 賱賱賲爻丨!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "賱丕 賷亘丿賵 賵爻賷胤 賯丕亘賱 賱賱賰鬲丕亘丞!"
+msgid "The encryption keys do not match"
+msgstr "賲賮丕鬲賷丨 丕賱鬲卮賮賷乇 睾賷乇 賲鬲胤丕亘賯丞"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "賱丕 賷賵噩丿 賯乇氐 CD-R/DVD-R 賮賷 丕賱爻賵丕賯丞"
+msgid "Right \"Windows\" key"
+msgstr "賲賮鬲丕丨 \"Windows\" 丕賱兀賷賲賳"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "賮卮賱鬲 毓賲賱賷丞 賳賯賱 WebDAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "賲賵賯毓 WebDAV 丕賱亘毓賷丿 賲鬲夭丕賲賳 賲爻亘賯丕賸!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "if set to yes, check empty password in /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "丕噩賲丕賱賷 丕賱鬲賯丿賲"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"賯亘賱 丕賱賲鬲丕亘毓丞, 毓賱賷賰 賯乇丕亍丞 亘賳賵丿 丕賱鬲乇禺賷氐 噩賷丿丕賸. 丕賳賴丕\n"
+"鬲睾胤賷 賰賱 鬲賵夭賷毓丞 Mandrake Linux. 丕匕丕 賰賳鬲 鬲賵丕賮賯 毓賱賶 賰賱 丕賱亘賳賵丿\n"
+"丕賱賲賵噩賵丿丞 賮賷賴丕, 賯賲 亘丕賱鬲兀卮亘乇 毓賱賶 氐賳丿賵賯 \"丕賯亘賱\". 丕賳 賱賲 鬲賯亘賱, 賯賲 亘廿睾賱丕賯\n"
+"丕賱賰賲亘賷賵鬲乇."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"鬲賲 丕賱賳賯賱 亘賳噩丕丨\n"
-"乇亘賲丕 鬲乇賷丿 丕賱鬲丨賯賯 丕匕丕 賰丕賳 賷賲賰賳賰 丕賱丿禺賵賱 丕賱賶 禺丕丿賲 亘丕賱兀賲乇:\n"
+"賴匕賴 賯丕卅賲丞 亘丕賱禺賷丕乇丕鬲 丕賱賲鬲賵賮乇丞 賱賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丞 丕賱丨丕賱賷丞:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "丿賯丞 丕賱毓乇囟"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"丿賵賳 鬲賳亘賷賴賰 丕賱賶 丕丿禺丕賱 賰賱賲丞 賲乇賵乇."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"兀丿丕丞 鬲賴賷卅丞 drakfirewall\n"
+"\n"
+"賴匕賴 丕賱兀丿丕丞 鬲爻賲丨 賱賰 亘鬲賴賷卅丞 噩丿丕乇 賳丕乇賷 卮禺氐賷 賱賳馗丕賲 Mandrake Linux 賴匕丕.\n"
+"廿匕丕 賰賳鬲 鬲乇賷丿 噩丿丕乇丕 賳丕乇賷丕 賲鬲禺氐氐丕, 丕賱賯 賳馗乇丞 毓賱賶\n"
+"鬲賵夭賷毓丞 MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s 賱丕 賷爻鬲噩賷亘"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕爻賲 丕賱賲爻鬲禺丿賲, 賰賱賲丞 丕賱賲乇賵乇 賵 丕賱賳胤丕賯 丕賱禺丕氐 亘賰 賱賱丿禺賵賱 丕賱賶 賴匕丕 "
+"丕賱賲爻鬲囟賷賮."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "鬲毓匕乇 丕賷噩丕丿 %s 毓賱賶 %s"
+msgid "Remove selected host"
+msgstr "丕丨匕賮 丕賱賲爻鬲囟賷賮 丕賱賲禺鬲丕乇"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "鬲賲 乇賮囟 賱丕鬲氐乇賷丨 亘賳賯賱 %s 丕賱賶 %s"
+msgid "Network configuration"
+msgstr "丕毓丿丕丿丕鬲 丕賱卮亘賰丞"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "賰賱賲丞 賲乇賵乇 爻賷卅丞 毓賱賶 %s"
+msgid "No sharing"
+msgstr "賱丕 賲卮丕乇賰丞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "賱丕 賷賵噩丿 胤賱亘 賰賱賲丞 爻乇 賮賷 %s 毓賱賶 丕賱賲賳賮匕 %s"
+msgid "Move selected rule down one level"
+msgstr "丕賳賯賱 丕賱賯丕毓丿丞 丕賱賲禺鬲丕乇丞 丕賱賶 鬲丨鬲 亘賲爻鬲賵賶 賵丕丨丿"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "ERROR: Cannot spawn %s."
+msgid "TB"
+msgstr "鬲賷乇丕亘丕賷鬲"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "賯丿 賷爻鬲睾乇賯 賴匕丕 亘毓囟 丕賱賵賯鬲 賱鬲賵賱賷丿 丕賱賲賮丕鬲賷丨."
+msgid "Please check if you are using a DVDR device"
+msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 噩賴丕夭 DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s 賲賵噩賵丿, 賴賱 鬲乇賷丿 丨匕賮賴責\n"
-"\n"
-"鬲丨匕賷乇: 丕匕丕 賯賲鬲 亘賴匕賴 丕賱毓賲賱賷丞 賲爻亘賯丕賸 睾丕賱亘丕賸\n"
-" 爻鬲丨鬲丕噩 丕賱賶 丨匕賮 丕賱賲丿禺賱 賲賳 authorized_keys 毓賱賶 丕賱禺丕丿賲."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"爻賷爻賲丨 禺丕丿賲 DHCP 賱賱賰賲亘賷賵鬲乇丕鬲 丕賱兀禺乇賶 亘丕賱廿賯賱丕毓 亘丕爻鬲禺丿丕賲 PXE 賮賷 丨丿賵丿 丕賱毓賳丕賵賷賳 "
+"丕賱賲毓胤丕丞.\n"
"\n"
-" 鬲賮丕氐賷賱 鬲賯乇賷乇 DrakBackup\n"
-"\n"
+"毓賳賵丕賳 丕賱卮亘賰丞 %s 賷爻鬲禺丿賲 netmask %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "廿賱睾丕亍"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" 鬲賯乇賷乇 賲乇丕賯亘 DrakBackup\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" 鬲賯乇賷乇 DrakBackup \n"
-"\n"
+"賷賲賰賳賳賷 噩毓賱 噩賴丕夭賰 賷亘丿兀 X 亘卮賰賱 丌賱賷 亘毓丿 丕賱廿賯賱丕毓.\n"
+"賴賱 鬲乇賷丿 X 兀賳 亘賷丿兀 亘毓丿 廿毓丕丿丞 鬲卮睾賷賱 噩賴丕夭賰責"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "噩賴夭 丕賱賯乇氐"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "丕賯胤毓 丕賱廿鬲氐丕賱 亘賭 %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "WARNING"
+msgid "Status:"
+msgstr "丕賱丨丕賱丞:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron 睾賷乇 賲鬲賵賮乇 丨鬲賶 丕賱丌賳 賱賱賲爻鬲禺丿賲賷賳 睾賷乇 丕賱噩匕乇"
+msgid "HTTP proxy"
+msgstr "亘乇賵賰爻賷 HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "賮卮賱 鬲孬亘賷鬲 %s. 馗賴乇 丕賱禺胤兀 丕賱鬲丕賱賷:"
+msgid "SSH Server"
+msgstr "禺丕丿賲 SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "賱丕, 賱丕 兀乇賷丿 丿禺賵賱丕 兀賱賷丕"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "賳毓賲, 兀乇賷丿 丿禺賵賱丕 丌賱賷丕 賲毓 賴匕丕 )丕賱賲爻鬲禺丿賲, 爻胤丨 丕賱賲賰鬲亘("
+msgid "European protocol"
+msgstr "丕賱亘乇賵鬲賵賰賵賱 丕賱兀賵乇賵亘賷"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "卮睾賾賱 X-Window 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", 丕賱胤丕亘毓丞 \"%s\" 毓賱賶 丕賱禺丕丿賲 \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "賵囟毓 丕賱賳馗丕賲"
+msgid "Error"
+msgstr "禺胤兀"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash!"
+msgid "allow \"su\""
+msgstr "丕爻賲丨 亘賭\"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "卮丕卮丞 Lilo"
+msgid "Australia"
+msgstr "兀賵爻鬲乇丕賱賷丕"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"丕禺鬲乇 爻賲丞\n"
-"Lilo 賵 bootsplash,\n"
-"賷賲賰賳賰 丕禺鬲賷丕乇賴賲\n"
-"亘卮賰賱 賲賳賮氐賱"
+msgid "please wait during ttmkfdir..."
+msgstr "乇噩丕亍 丕賳鬲馗乇 兀孬賳丕亍 毓賲賱賷丞 ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "丕賱爻賲丕鬲"
+msgid "Configure only card \"%s\"%s"
+msgstr "賯賲 亘廿毓丿丕丿 丕賱亘胤丕賯丞 \"%s\"%s 賮賯胤"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "丕禺鬲賷丕乇 丕賱卮丕卮丕鬲"
+msgid "Level"
+msgstr "丕賱賲爻鬲賵賶"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"兀賳鬲 鬲爻鬲禺丿賲 %s 賰賲丿賷乇 丕賯賱丕毓 丨丕賱賷丕.\n"
-"丕囟睾胤 毓賱賶 鬲賴賷卅丞 賱鬲卮睾賷賱 賲毓丕賱噩 丕賱廿毓丿丕丿"
+msgid "Change the printing system"
+msgstr "鬲睾賷賷乇 賳馗丕賲 丕賱胤亘丕毓丞"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "鬲賲 鬲孬亘賷鬲 爻賲丕鬲 LiLo 賵 Bootsplash 亘賳噩丕丨"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"賳馗丕賲賰 賷丿毓賲 丕賱廿毓丿丕丿 賲鬲毓丿丿 丕賱乇丐賵爻.\n"
+"賲丕匕丕 鬲乇賷丿 兀賳 鬲賮毓賱責"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "賮卮賱 鬲孬亘賷鬲 丕賱爻賲丕鬲"
+msgid "Configure services"
+msgstr "鬲賴賷卅丞 丕賱禺丿賲丕鬲"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "賲賱丕丨馗丞"
+msgid "Broadcast Address:"
+msgstr "毓賳賵丕賳 Broadcast:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "兀毓丿 鬲卮睾賷賱 'lilo'"
+msgid "mount failed: "
+msgstr "賮卮賱 丕賱鬲丨賲賷賱: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"鬲毓匕乇鬲 丕毓丕丿丞 鬲卮睾賷賱 LiLo!\n"
-"卮睾賾賱 \"lilo\" 賰賲爻鬲禺丿賲 噩匕乇 賮賷 爻胤乇 丕賱兀賵丕賲乇 賵 兀賰賲賱 鬲孬亘賷鬲 爻賲丕鬲 LiLo."
+"賳賵丕丞 賷賳賰爻 鬲丨鬲丕噩 丕賱賶 鬲卮睾賷賱 丨賱賯丞 丨爻丕亘賷丞 (Calculation Loop) 毓賳丿 丕賱廿賯賱丕毓 賱鬲賳卮賷胤 "
+"兀丿丕丞 毓丿 丕賱賵賯鬲. 賷鬲賲 丨賮馗 丕賱賳鬲賷噩丞 賰賭bogomips 賰胤乇賷賯丞 賱賱鬲兀賰丿 賲賳 氐丨丞 丕賱賲毓丕賱噩."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "丕噩毓賱 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "氐賵乇丞"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "鬲毓匕乇 鬲卮睾賷賱 mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "鬲毓匕乇鬲 丕囟丕賮丞 丕賱胤丕亘毓丞 \"%s\" 丕賱賶 Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "丕丿丕乇丞 毓賳 亘毓丿"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"鬲毓匕乇鬲 賰鬲丕亘丞 /etc/sysconfig/bootsplash\n"
-"賱賲 賷鬲賲 丕賷噩丕丿 丕賱賲賱賮."
+"丿毓賲 PCMCIA 睾賷乇 賲賵噩賵丿 亘毓丿 丕賱丌賳 賱廿氐丿丕乇 丕賱賳賵丕丞 2.2. 賮囟賱丕 丕爻鬲禺丿賲 丕賱廿氐丿丕乇 2.4"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "丕賰鬲亘 %s"
+msgid "Selected All"
+msgstr "鬲賲 丕禺鬲賷丕乇 丕賱賰賱"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "鬲毓匕乇鬲 賰鬲丕亘丞 /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "賱賲 賷鬲賲 丕賷噩丕丿 乇爻丕賱丞 Lilo"
+msgid "Webmin Service"
+msgstr "禺丿賲丕鬲 Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "丕賳爻禺 %s 丕賱賶 %s"
+msgid "device"
+msgstr "賵丨丿丞"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "丕賳爻禺 %s 丕丨鬲賷丕胤賷丕賸 丕賱賶 %s.old"
+msgid "All"
+msgstr "丕賱賰賱"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "丕賳卮卅 爻賲丞 噩丿賷丿丞"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "兀賷 賳馗丕賲 胤亘丕毓丞 鬲乇賷丿 兀賳 鬲爻鬲禺丿賲責"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"丕毓乇囟 丕賱爻賲丕鬲\n"
-"賮賷 爻胤乇 丕賱兀賵丕賲乇"
+msgid "Greece"
+msgstr "丕賱賷賵賳丕賳"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "孬亘鬲 丕賱爻賲丕鬲"
+msgid "An error occurred"
+msgstr "馗賴乇 禺胤兀"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "賵囟毓 Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"賷噩亘 鬲乇賯賷丞 賴匕賴 丕賱丨夭賲丞.\n"
+"賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 賱丕 鬲乇賷丿 丕禺鬲賷丕乇賴丕責"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "賵囟毓 Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "丕賱鬲丕賲賷賱 (丌賱丞 賰丕鬲亘丞)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "賷丿賵賷"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/賲賱賮/_禺乇賵噩"
+msgid "Printer manufacturer, model, driver"
+msgstr "賲氐賳賾毓 丕賱胤丕亘毓丞, 丕賱胤乇丕夭, 丕賱賲卮睾賾賱"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_賲賱賮"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"賱丕 賷賵噩丿 賵爻胤 兀賵 乇亘賲丕 賷賰賵賳 丕賱賵爻胤 賲丨賲賷 賲賳 丕賱賯乇丕亍丞 賱賱噩賴丕夭 %s.\n"
+"賮囟賱丕賸 丕丿禺賱 賵爻胤 賮賶 丕賱賵丨丿丞."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "丕毓丿丕丿 兀爻賱賵亘 丕賱廿賯賱丕毓"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"丕賱丿賱賷賱 %s 賷丨鬲賵賷 賲爻亘賯丕 毓賱賶 亘毓囟 丕賱亘賷丕賳丕鬲\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "賱丕 賷賵噩丿 賲鬲氐賮丨 賲鬲賵賮乇! 賮囟賱丕賸 賯賲 亘鬲孬亘賷鬲 賲鬲氐賮丨"
+msgid "Printer on NetWare server"
+msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "噩丕乇賷 丕賱廿鬲氐丕賱 亘賲毓丕賱噩 Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "丕賰鬲亘 丨噩賲 丕賱匕丕賰乇丞 亘丕賱賲賷睾丕亘丕賷鬲"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "賱賲 賷鬲賲 鬲孬亘賷鬲 丕賱丨夭賲丞"
+msgid "Real name"
+msgstr "丕賱丕爻賲 丕賱丨賯賷賯賷"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "睾賷乇 賲孬亘賾鬲"
+msgid "done"
+msgstr "丕賳鬲賴賶"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "丕賱兀丿賵丕鬲 丕賱賲賳賮氐賱丞"
+msgid "Please uncheck or remove it on next time."
+msgstr "賮囟賱丕賸 賯賲 亘廿夭丕賱丞 丕賱鬲兀卮賷乇 兀賵 丕丨匕賮賴丕 賮賷 丕賱賲乇丞 丕賱賯丕丿賲丞."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "鬲賯乇賷乇"
+msgid "Higher"
+msgstr "賲乇鬲賮毓 兀賰孬乇"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "丕禺鬲乇 丕賱鬲噩夭卅丕鬲 丕賱鬲賷 鬲乇賷丿 鬲噩賴賷夭賴丕"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丞 鬲賱賮丕夭 毓賱賶 噩賴丕夭賰. 賮囟賱丕賸 鬲兀賰丿 賲賳 兀賳 亘胤丕賯丞 丕賱賮賷丿賷賵/丕賱鬲賱賮丕夭 "
+"丕賱賲丿毓賵賲丞 賮賷 賱賷賳賰爻 賲賵氐賵賱丞 亘卮賰賱 氐丨賷丨.\n"
"\n"
"\n"
-"賱鬲爻賱賷賲 鬲賯乇賷乇 丕賱毓賷賵亘, 丕囟睾胤 毓賱賶 夭乇 鬲賯乇賷乇.\n"
-"爻賷賯賵賲 賴匕丕 亘賯鬲丨 賲鬲氐賮丨 賵賷亘 毓賱賶 丕賱氐賮丨丞 https://drakbug.mandrakesoft.com\n"
-" 丨賷孬 爻鬲噩丿 丕爻鬲賲丕乇丞 毓賱賷賰 賲賱丐賴丕. 丕賱賲毓賱賵賲丕鬲 丕賱賲匕賰乇丞 兀毓賱丕賴 爻賷鬲賲 賳賯賱賴丕\n"
-"丕賱賶 匕賱賰 丕賱禺丕丿賲\n"
+"賷賲賰賳賰 夭賷丕乇丞 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱毓鬲丕丿 丕賱賲丿毓賵賲 丕賱禺丕氐丞 亘賳丕 毓賱賶:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "丕賱廿氐丿丕乇:"
+msgid "Can't find %s on %s"
+msgstr "鬲毓匕乇 丕賷噩丕丿 %s 毓賱賶 %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "丕賱賳賵丕丞:"
+msgid "Japanese 106 keys"
+msgstr "丕賱賷丕亘丕賳賷丞 106 賲賮丕鬲賷丨"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "丕賱噩夭賲丞: "
+msgid "This will take a few minutes."
+msgstr "爻賷爻鬲睾乇賯 賴匕丕 亘囟毓 丿賯丕卅賯."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "丕賱鬲胤亘賷賯:"
+msgid "Burkina Faso"
+msgstr "亘賵乇賰賷賳丕賮丕爻賵"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "賲毓丕賱噩丕鬲 丕賱鬲賴賷卅丞"
+msgid "Use scanners on remote computers"
+msgstr "丕爻鬲禺丿賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 丕賱丨賵丕賷爻亘 丕賱亘毓賷丿丞"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "丕丨匕賮 丕賱賯丕毓丿丞 丕賱賲禺鬲丕乇丞"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "兀丿丕丞 丕賱廿賳鬲賯丕賱 賲賳 Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "丕賱賵氐賵賱 丕賱賶 丕賱胤丕亘毓丕鬲 毓賱賶 禺丕丿賲丕鬲 CUPS 丕賱亘毓賷丿丞"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "兀丿禺賱 賯乇氐 賲乇賳 賮賷 %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "賲丿賷乇 丕賱亘乇丕賲噩"
+msgid "Maldives"
+msgstr "噩夭乇 丕賱賲丕賱丿賷賮"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "丕賱鬲丨賰賲 毓賳 亘毓丿"
+msgid "compact"
+msgstr "賲丿賲噩"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "丿賯賷賯丞 賵丕丨丿丞"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "毓賱賶 丕賱賯賳丕丞 %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", 噩賴丕夭 賲鬲毓丿丿 丕賱賵馗丕卅賮"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "賱丕賵爻"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "DrakSync"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "賱丕 鬲賵噩丿 鬲噩夭卅丞 FAT 賯丕亘賱 賱鬲睾賷賷乇 丨噩賲賴丕 (兀賵 賱丕 鬲賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賲鬲亘賯賷丞)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "賲毓丕賱噩 First Time"
+msgid "Up"
+msgstr "賮賵賯"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "賲乇賰夭 鬲丨賰賲 Mandrake"
+msgid "Firewall"
+msgstr "噩丿丕乇 賳丕乇賷"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "兀丿丕丞 鬲賯乇賷乇 丕賱毓賷賵亘 賮賷 Mandrake"
+msgid "Area:"
+msgstr "丕賱賲賳胤賯丞 :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parameters"
+msgid "(E)IDE/ATA controllers"
+msgstr "賲鬲丨賰賲丕鬲 (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "廿毓丿丕丿丕鬲 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "Printer Server"
+msgstr "禺丕丿賲 丕賱胤丕亘毓丞"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP 丕賱毓賲賷賱"
+msgid "Disconnection from the Internet complete."
+msgstr "丕賰鬲賲賱 賯胤毓 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
+msgid "Custom configuration"
+msgstr "鬲賴賷卅丞 賲禺氐氐丞"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"賮囟賱丕賸 兀禺亘乇 毓賳 賲賰丕賳 氐賵乇丞 丕賱鬲孬亘賷鬲.\n"
+"\n"
+"丕匕丕 賱賲 賷賰賳 賴賳丕賰 丿賱賷賱 賲賵噩賵丿, 賮囟賱丕賸 丕賳爻禺 賲丨鬲賵賷丕鬲 丕賱賯乇氐 丕賱賲丿賲噩 兀賵 賯乇氐 DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "賳賵毓 丕賱毓賱丕賯丞"
+msgid "Saint Pierre and Miquelon"
+msgstr "爻丕賳鬲 亘賷賷乇 賵 賲賷賰賷賱賵賳"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "丕賱鬲卮賰賷賱:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"賲卮丕賰賱 丕爻鬲毓丕丿丞 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞:\n"
+"\n"
+"兀孬賳丕亍 禺胤賵丞 丕賱鬲孬亘賷鬲, 爻賷賯賵賲 Drakbackup 亘丕賱鬲兀賰丿 賲賳 賰賱 賲賱賮丕鬲\n"
+"丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賯亘賱 丕爻鬲毓丕丿鬲賴丕.\n"
+"賯亘賱 丕賱廿爻鬲毓丕丿丞 爻賷賯賵賲 drakbackup 亘丨匕賮 \n"
+"丕賱丿賱賷賱 丕賱兀氐賱賷 賵 爻鬲禺爻乇 賰賱 丕賱亘賷丕賳丕鬲 丕賱鬲賷 \n"
+"毓賱賷賴. 賲賳 丕賱賲賴賲 兀賳 鬲賰賵賳 丨匕乇丕賸 賵 賱丕 鬲賯賵賲 亘鬲毓丿賷賱 \n"
+"亘賷丕賳丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 賷丿賵賷丕賸.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "廿毓丿丕丿丕鬲 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "saving Bootsplash theme..."
+msgstr "噩丕乇賷 丨賮馗 爻賲丞 Bootsplash..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"賱賷爻鬲 賱丿賷賰 兀賷 丕鬲氐丕賱丕鬲 廿賳鬲乇賳鬲.\n"
-"賯賲 亘毓賲賱 丕鬲氐丕賱 兀賵賱丕 亘丕爻鬲禺丿丕賲 '鬲賴賷卅丞'"
+msgid "Portugal"
+msgstr "丕賱亘乇鬲睾丕賱"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"賱賲 賷鬲賲 鬲賴賷卅丞 丕賱賵丕噩賴丞 亘毓丿.\n"
-"賯賲 亘鬲卮睾賷賱 賲毓丕賱噩 丕賱鬲賴賷卅丞 賮賷 丕賱賳丕賮匕丞 丕賱乇卅賷爻賷丞"
+msgid "Do you have another one?"
+msgstr "賴賱 毓賳丿賰 賵丕丨丿丞 兀禺乇賶責"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "賯賲 亘丕賱鬲賳卮賷胤 丕賱丌賳"
+msgid ", printing to %s"
+msgstr ", 噩丕乇賷 丕賱胤亘丕毓丞 丕賱賶 %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "賯賲 亘廿夭丕賱丞 丕賱鬲賳卮賷胤 丕賱丌賳"
+msgid "Assign host name from DHCP address"
+msgstr "毓賷賾賳 丕爻賲 丕賱賲爻鬲囟賷賮 賲賳 毓賳賵丕賳 DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP 丕賱毓賲賷賱 "
+msgid "Toggle to normal mode"
+msgstr "丕賱丕賳鬲賯丕賱 丕賱賶 丕賱賵囟毓 丕賱毓丕丿賷"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "賷鬲賲 亘丿亍賴 毓賳丿 丕賱廿賯賱丕毓"
+msgid "Generic"
+msgstr "Generic"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "亘乇賵鬲賵賰賵賱 丕賱廿賯賱丕毓"
+msgid "Cylinder %d to %d\n"
+msgstr "丕賱丕爻胤賵丕賳丞 %d 丕賱賶 %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "丕賱賲丨賵賾賱 %s: %s"
+msgid "New profile..."
+msgstr "鬲卮賰賷賱 噩丿賷丿..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "廿毓丿丕丿 LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "兀賷 賯乇氐 鬲乇賷丿 賳賯賱賴責"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "廿毓丿丕丿 LAN"
+msgid "Display logo on Console"
+msgstr "丕毓乇囟 丕賱卮毓丕乇 賮賷 爻胤乇 丕賱兀賵丕賲乇"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"賱賲 鬲賯賲 亘鬲賴賷卅丞 兀賷 賵丕噩賴丕鬲.\n"
-"賯賲 亘鬲賴賷卅鬲賴賲 兀賵賱丕 毓賳 胤乇賷賯 丕賱囟睾胤 毓賱賶 '鬲賴賷卅丞'"
+msgid "Windows Domain"
+msgstr "賳胤丕賯 Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "丕鬲氐賱..."
+msgid "Interface %s (on network %s)"
+msgstr "丕賱賵丕噩賴丞 %s (毓賱賶 丕賱卮亘賰丞 %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "丕賯胤毓 丕賱廿鬲氐丕賱..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "睾賷乇 賲鬲氐賱"
+msgid "Wallis and Futuna"
+msgstr "賵丕賱賷爻 賵 賮賵鬲賵賳丕"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "賲鬲賾氐賱"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "賱丕 丨丕噩丞 丕賱賶 丕賳卮丕亍 /etc/dhcpd.conf 兀賵賱丕賸!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "鬲丨匕賷乇, 鬲賲 丕賷噩丕丿 丕鬲氐丕賱 廿賳鬲乇賳鬲 丌禺乇, 乇亘賲丕 賷賰賵賳 賷爻鬲禺丿賲 卮亘賰鬲賰"
+msgid "Is FPU present"
+msgstr "賴賱 FPU 賲賵噩賵丿"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr "丕賱賵丕噩賴丞:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "賱丕 鬲賵噩丿 賲丕爻丨丕鬲 囟賵卅賷丞 賲鬲賵賮乇丞 毓賱賶 賳馗丕賲賰.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "丕賱亘賵丕亘丞:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"毓賮賵丕賸, 賱丕 鬲賵噩丿 賲毓賱賵賲丕鬲\n"
+"丕囟丕賮賷丞 丨夭賱 賴匕賴 丕賱丨夭賲丞."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
-msgstr "鬲胤亘賷賯"
+msgid "Build Single NIC -->"
+msgstr "丕亘賳賷 NIC 賵丕丨丿丞 -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "丕賳賯乇 賴賳丕 賱鬲卮睾賷賱 丕賱賲毓丕賱噩 ->"
+msgid "Is this correct?"
+msgstr "賴賱 賴匕丕 氐丨賷丨 ? "
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "丕賱賲毓丕賱噩..."
+msgid "Marshall Islands"
+msgstr "噩夭乇 賲丕乇卮丕賱"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
-msgstr "丕賱丨丕賱丞:"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "丕賱賳賵毓:"
+msgid "Root password"
+msgstr "賰賱賲丞 賲乇賵乇 丕賱賲爻鬲禺丿賲 丕賱噩匕乇"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "丕賱丿禺賵賱 丕賱賶 丕賱廿賳鬲乇賳鬲"
+msgid "Build All Kernels -->"
+msgstr "丕亘賳賷 賰賱 丕氐丿丕乇丕鬲 丕賱賳賵丕丞 -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "丕爻賲 丕賱賲爻鬲囟賷賮 :"
+msgid "if set to yes, report unowned files."
+msgstr "if set to yes, report unowned files."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "廿毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"賱賷爻鬲 賱丿賷賰 鬲噩夭卅丞 鬲亘丿賷賱.\n"
+"\n"
+"賴賱 鬲乇賷丿 丕賱賲鬲丕亘毓丞 毓賱賶 兀賷 丨丕賱責"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr "丕賱丨丕賱丞"
+msgid "Server IP missing!"
+msgstr "IP 丕賱禺丕丿賲 賲賮賯賵丿!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "丕賱賲丨乇賰"
+msgid "Suriname"
+msgstr "爻賵乇賷賳丕賲"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "丕賱亘乇賵鬲賵賰賵賱"
+msgid "Enable ACPI"
+msgstr "鬲賲賰賷賳 ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "丕賱賵丕噩賴丞"
+msgid "Graphical Environment"
+msgstr "亘賷卅丕鬲 乇爻賵賲賷丞"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "廿毓丿丕丿 丕賱丿禺賵賱 丕賱賶 丕賱廿賳鬲乇賳鬲..."
+msgid "Gibraltar"
+msgstr "噩亘賱 胤丕乇賯"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
-msgstr "丕賱丕賳鬲馗丕乇 賲賳 賮囟賱賰"
+msgid "on Tape Device"
+msgstr "毓賱賶 丕賱卮乇賷胤"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"賱廿爻賲 丕賱鬲卮賰賷賱 丕賱匕賷 爻鬲毓賲賱賴 (丕賱鬲卮賰賷賱 丕賱噩丿賷丿 賷鬲賲 毓賲賱賴 賰賳爻禺丞 賲賳 丕賱鬲卮賰賷賱 丕賱丨丕賱賷) :"
+msgid "Do nothing"
+msgstr "賱丕 鬲賮毓賱 卮賷卅丕賸"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "鬲卮賰賷賱 噩丿賷丿..."
+msgid "Delete Client"
+msgstr "丕丨匕賮 丕賱毓賲賷賱"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "丕賱鬲卮賰賷賱 丕賱賲胤賱賵亘 丨匕賮賴:"
+msgid "Filesystem type: "
+msgstr "賳賵毓 賳馗丕賲 丕賱賲賮丕鬲: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "丕丨匕賮 丕賱鬲卮賰賷賱..."
+msgid "Starting network..."
+msgstr "噩丕乇賷 亘丿亍 丕賱卮亘賰丞..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "丕毓丿丕丿丕鬲 丕賱卮亘賰丞 (%d 賲賵丕卅賲丕鬲)"
+msgid "Vietnam"
+msgstr "賮賷賷鬲賳丕賲"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"賲丿賷乇 毓乇囟 X11 賷爻賲丨 賱賰 亘鬲爻噩賷賱 丕賱丿禺賵賱 丕賱賶\n"
-"賳馗丕賲賰 賲毓 鬲卮睾賷賱 禺丕丿賲 丕賱賳賵丕賮匕 X 賵 賷丿毓賲 鬲卮睾賷賱\n"
-"毓丿丞 噩賱爻丕鬲 X 賲禺鬲賱賮丞 毓賱賶 賲丕賰賷賳鬲賰 丕賱賲丨賱賷丞 賮賷 賳賮爻 丕賱賵賯鬲."
+msgid "/_Fields description"
+msgstr "/_賵氐賮 丕賱丨賯賵賱"
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "噩丕乇賷 丕禺鬲賷丕乇 賲丿賷乇 丕賱毓乇囟"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "丨爻賾賳 賲爻鬲賵賶 丕賱兀賲賳"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"鬲毓匕乇 睾賱賯 mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "賲爻丕毓丿丞"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "鬲毓匕乇 鬲賳賮賷匕: %s"
+msgid "Your personal phone number"
+msgstr "乇賯賲 丕賱賴丕鬲賮 丕賱卮禺氐賷 丕賱禺丕氐 亘賰"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "毓賱賶 兀賷 賲爻丕丨丞 鬲乇賷丿 丨賮馗 Windows"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"賱丕 賷賵噩丿 賵爻胤 兀賵 乇亘賲丕 賷賰賵賳 丕賱賵爻胤 賲丨賲賷 賲賳 丕賱賯乇丕亍丞 賱賱噩賴丕夭 %s.\n"
-"賮囟賱丕賸 丕丿禺賱 賵爻胤 賮賶 丕賱賵丨丿丞."
+"鬲賲 丕乇爻丕賱 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞 丕賱賶 丕賱胤丕亘毓丞.\n"
+"賯丿 賷爻鬲睾乇賯 賴匕丕 亘毓囟 丕賱賵賯鬲 丨鬲賶 鬲亘丿兀 丕賱胤丕亘毓丞.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "鬲兀賰丿 賲賳 賵噩賵丿 丕賱賵爻賷胤 賱賱賵丨丿丞 %s"
+msgid "Username required"
+msgstr "賷購丨鬲丕噩 丕賱賶 丕爻賲 丕賱賲爻鬲禺丿賲"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"丕毓鬲賲丕丿丕賸 毓賱賶 丕賱賱睾丞 丕?賮鬲乇丕囟賷丞 丕賱鬲賷 丕禺鬲乇鬲賴丕 賮賷 賴匕丕 丕賱賯爻賲, 爻賷賯賵賲 DrakX\n"
+"亘丕禺鬲賷丕乇 鬲賴賷卅丞 賱賵丨丞 丕賱賲賮丕鬲賷丨 丌賱賷丕賸. 毓賲賵賲丕賸,\n"
+"乇亘賲丕 賱賷爻鬲 賱丿賷賰 賱賵丨丞 賲賮丕鬲賷丨 賲賯丕亘賱丞 亘卮賰賱 賲亘丕卮乇 賱賱睾鬲賰:\n"
+"賲孬賱丕賸 乇亘賲丕 鬲賰賵賳 毓乇亘賷丕賸 賲鬲賰賱賲丕賸 亘丕賱賱睾丞 丕?賳噩賱賷夭賷丞, 乇亘賲丕 鬲賰賵賳 賱丿賷賰\n"
+"賱賵丨丞 賲賮丕鬲賷丨 爻賵賷爻乇賷丞. 丕匕丕 賰賳鬲 鬲鬲賰賱賲 丕?賳噩賱賷夭賷丞 賱賰賳 賲賵噩賵丿 賮賷 賰賷亘賰, 乇亘賲丕\n"
+"鬲噩丿 賳賮爻賰 賮賷 賳賮爻 丕賱賲賵賯賮 丨賷孬 ? 鬲鬲胤丕亘賯 賱睾鬲賰 賲毓 賱賵丨丞 丕賱賲賮丕鬲賷丨.\n"
+"賮賷 丕賱丨丕賱鬲賷賳, 爻鬲爻賲丨 賱賰 禺胤賵丞 丕賱鬲孬亘賷鬲 爻鬲爻賲丨 賱賰 亘丕禺鬲賷丕乇\n"
+"賱賵丨丞 賲賮丕鬲賷丨 賲賳丕爻亘丞 賲賳 丕賱賯丕卅賲丞.\n"
+"\n"
+"丕賳賯乇 夭乇 \"丕賱賲夭賷丿\" 賱毓乇囟 賯丕卅賲丞 亘賰賱 賱賵丨丕鬲 丕賱賲賮丕鬲賷丨\n"
+"丕賱賲丿毓賵賲丞.\n"
+"\n"
+"丕匕丕 丕禺鬲乇鬲 賱賵丨丞 賲賮丕鬲賷丨 賱丨乇賵賮 睾賷乇 ?鬲賷賳賷丞, 賮爻賷爻賲丨 賱賰\n"
+"賲乇亘毓 丕賱丨賵丕乇 丕賱鬲丕賱賷 亘丕禺鬲賷丕乇 丕禺鬲氐丕乇丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲賷\n"
+"爻鬲睾賷乇 賵囟毓 賱賵丨丞 丕賱賲賮丕鬲賷丨 亘賷賳 丕賱丨乇賵賮 丕賱賱丕鬲賷賳賷丞 賵 丕賱睾賷乇 ?鬲賷賳賷丞."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "噩賴夭 丕賱賯乇氐"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "禺賷丕乇丕鬲 胤丕亘毓丞 SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "丕賱賳丕鬲噩"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "丕夭丕賱丞 賵丨丿丞"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd 丕賱禺氐丕卅氐 丕賱丕禺鬲賷丕乇賷丞"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "丕囟丕賮丞 賵丨丿丞"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "SCSI 丕賴賲賱 賵丨丿丕鬲 丕賱"
+msgid "Protocol for the rest of the world"
+msgstr "亘乇賵鬲賵賰賵賱 賱亘賯賷丞 丕賱毓丕賱賲"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "丕匕丕 丕丨鬲噩鬲賴"
+msgid "Print test pages"
+msgstr "丕胤亘毓 氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "RAID 丕賴賲賱 賵丨丿丕鬲 丕賱"
+msgid "64 MB or more"
+msgstr "64 賲賷睾丕亘丕賷鬲 兀賵 兀賰孬乇"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "丕噩亘丕乇"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"賮囟賱丕賸 丕禺鬲乇 丕賱氐賮丨丕鬲 丕賱廿禺鬲亘丕乇賷丞 丕賱鬲賷 鬲賵丿 胤亘丕毓鬲賴丕.\n"
+"賲賱丨賵馗丞: 丕賱氐賮丨丞 丕賱廿禺鬲亘丕乇賷丞 賱氐賵乇丞 爻鬲爻鬲睾乇賯 賵賯鬲丕賸 胤賵賷賱丕賸 賱胤亘丕毓鬲賴丕 賵 毓賱賶 胤丕亘毓丕鬲 "
+"丕賱賱賷夭乇 亘賰賲賷丞 匕丕賰乇丞 賯賱賷賱丞 賯丿 賱丕 賷鬲賲 胤亘丕毓鬲賴丕 賲胤賱賯丕賸. 賮賷 兀睾賱亘 丕賱兀丨賷丕賳 賷賰賮賷 兀賳 "
+"鬲胤亘毓 丕賱氐賮丨丞 丕賱廿禺鬲亘丕乇賷丞 丕賱賯賷丕爻賷丞."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd 丕賱禺氐丕卅氐 丕賱丕禺鬲賷丕乇賷丞"
+msgid "Please select the device where your %s is attached"
+msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱噩賴丕夭 丕賱賲鬲氐賱 亘賴 %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "賲賳胤賯丞 丕賱禺亘乇丕亍"
+msgid "Not formatted\n"
+msgstr "睾賷乇 賲噩賴夭\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "丕氐丿丕乇丞 丕賱賱亘"
+msgid "Periodic Checks"
+msgstr "鬲兀賰丿 丿賵乇賷"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "丕賱賲乇噩毓"
+msgid "PXE Server Configuration"
+msgstr "鬲賴賷卅丞 禺丕丿賲 PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "毓丕賲"
+msgid "Backup the system files before:"
+msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賳馗丕賲 賯亘賱:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "氐賳毓 賯乇氐 賲乇賳 賱亘丿亍 丕賱賳馗丕賲"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"賴匕丕 賴賵 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 丕賱賯賷丕爻賷 賱賱丨丕爻賵亘 丕賱匕賷 爻賷爻鬲禺丿賲 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賰毓賲賷賱."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "丿乇賷賰 賱賱丕賯乇丕氐 丕賱賲乇賳丞"
+msgid "First floppy drive"
+msgstr "爻賵丕賯丞 丕賱賯乇氐 丕賱賲乇賳 丕賱兀賵賱賶"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "丨噩賲"
+msgid "/File/_Quit"
+msgstr "/賲賱賮/_禺乇賵噩"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "丕爻賲 丕賱賵丨丿丞"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "賲丕 亘毓丿 丕夭丕賱丞 丕賱鬲孬亘賷鬲"
+msgid "Choose the new size"
+msgstr "丕禺鬲乇 丕賱丨噩賲 丕賱噩丿賷丿"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "丕丨匕賮 丕賱禺胤賵胤 賲賳 丕賱賳馗丕賲"
+msgid "Media class"
+msgstr "賮卅丞 丕賱賵爻賷胤"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "丕賱廿禺鬲亘丕乇丕鬲 丕賱兀賵賱賷丞"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "丕賱賭 %s 睾賷乇 賲毓乇賵賮 賲賳 賯亘賱 賴匕丕 丕賱廿氐丿丕乇 賲賳 Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "賲丕 亘毓丿 丕賱鬲孬亘賷鬲"
+msgid "Faroe Islands"
+msgstr "噩夭乇 丕賱賮賷乇賵"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "孬亘賾鬲 賵 丨賵賾賱 丕賱禺胤賵胤"
+msgid "Restart XFS"
+msgstr "兀毓丿 鬲卮睾賷賱 XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "丕賳爻禺 丕賱禺胤賵胤 丕賱賶 賳馗丕賲賰"
+msgid "Add host/network"
+msgstr "兀囟賮 賲爻鬲囟賷賮/卮亘賰丞"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "丕丨匕賮 丕賱賯丕卅賲丞"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "鬲賲 丕禺鬲賷丕乇 丕賱賰賱"
+msgid "Please enter the directory to save to:"
+msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱丿賱賷賱 丕賱匕賷 爻賷鬲賲 丕賱丨賮馗 賮賷賴:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "鬲賲 丕夭丕賱丞 丕禺鬲賷丕乇 丕賱賰賱"
+msgid "Model name"
+msgstr "丕爻賲 丕賱胤乇丕夭"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "廿囟睾胤 賴賳丕 廿匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕."
+msgid "Albania"
+msgstr "兀賱亘丕賳賷丕"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "丕囟睾胤 賴賳丕 廿匕丕 賰賳鬲 賲鬲兀賰丿丕."
+msgid "No CDR/DVDR in drive!"
+msgstr "賱丕 賷賵噩丿 賯乇氐 CD-R/DVD-R 賮賷 丕賱爻賵丕賯丞"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "孬亘賾鬲 丕賱賯丕卅賲丞"
+msgid "British Indian Ocean Territory"
+msgstr "賲賳胤賯丞 噩夭乇 丕賱賲丨賷胤 丕賱賴丕丿賷 丕賱亘乇賷胤丕賳賷丞"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "丕禺鬲乇 賲賱賮 兀賵 丿賱賷賱 丕賱禺胤賵胤 賵 丕囟睾胤 '丕囟丕賮丞'"
+msgid "Normal Mode"
+msgstr "賵囟毓 毓丕丿賷"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"賯亘賱 鬲孬亘賷鬲 兀賷 禺胤賵胤 鬲兀賰丿 兀賳賴 賱丿賷賰 丕賱丨賯 亘丕爻鬲禺丿丕賲賴賲 賵 鬲孬亘賷鬲賴賲 毓賱賶 丕賱賳馗丕賲.\n"
+"鬲兀賰丿 賲賳 兀賳 賲乇丕賯亘 cron 賲賵噩賵丿 囟賲賳 禺丿賲丕鬲 丕賱賳馗丕賲. \n"
"\n"
-"-賷賲賰賳賰 鬲孬亘賷鬲 丕賱禺胤賵胤 亘丕賱胤乇賷賯丞 丕賱毓丕丿賷丞. 賮賷 丨丕賱丕鬲 賳丕丿乇丞, 賯丿 鬲鬲爻亘亘 丕賱禺胤賵胤 "
-"丕賱賲夭賷賮丞 賮賷 鬲毓賱賷賯 禺丕丿賲 X."
+"賱丕丨馗 兀賳 賰賱 賵爻丕卅胤 丕賱卮亘賰丞 鬲爻鬲禺丿賲 丕賱賯乇氐 丕賱氐賱亘."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "胤丕亘毓丕鬲 毓丕丿賷丞 (Generic)"
+msgid "Printer connection type"
+msgstr "賳賵毓 賵氐賱丞 丕賱胤丕亘毓丞"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "賱丕 賲賵丕卅賲 卮亘賰丞 毓賱賶 賳馗丕賲賰"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "丕賱卮亘賰丞 %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "丕賱賲丕賱丕賷丕賱丕賲"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "丕禺鬲乇 丕賱鬲胤亘賷賯丕鬲 丕賱鬲賷 爻鬲丿毓賲 丕賱禺胤賵胤 :"
+msgid "Option %s out of range!"
+msgstr "丕賱禺賷丕乇 %s 禺丕乇噩 丕賱賲鬲賵爻胤!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-"噩賲賷毓 丕賱丨賯賵賯 賲丨賮賵馗丞 (C) 2001-2002 賱賭MandrakeSoft \n"
-"\tDUPONT Sebastien (丕賱廿氐丿丕乇 丕賱兀氐賱賷)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" 賴匕丕 丕賱亘乇賳丕賲噩 賴賵 亘乇賳丕賲噩 丨乇; 賷賲賰賳賰 丕毓丕丿丞 鬲賵夭賷毓丞 賵/兀賵 鬲毓丿賷賱賴\n"
-" 鬲丨鬲 亘賳賵丿 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 (GPL) 賰賲丕 賳購卮賽乇鬲 毓賳 胤乇賷賯\n"
-" 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞; 廿賲丕 丕廿氐丿丕乇 丕賱孬丕賳賷 賲賳 丕賱鬲乇禺賷氐 兀賵\n"
-" 兀賷 賳爻禺丞 鬲丕賱賷丞 (丨爻亘 丕禺鬲賷丕乇賰).\n"
-"\n"
-" 賴匕丕 丕賱亘乇賳丕賲噩 賷購賵夭賾賻毓 毓賱賶 兀賲賱 兀賳 賷賰賵賳 賲賮賷丿丕,\n"
-" 賱賰賳 丿賵賳 兀賷 囟賲丕賳鈥; 丨鬲賶 亘丿賵賳 丕賱囟賲丕賳丞 丕賱賲賮賴賵賲丞\n"
-" 賱賱廿鬲噩丕乇 兀賵 丕賱賲賳丕爻亘丞 賱睾乇囟 賲毓賷賳. 丕賳馗乇\n"
-" 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 賱賱鬲賮丕氐賷賱.\n"
-"\n"
-" 賷噩亘 兀賳 鬲賰賵賳 賯丿 鬲爻賱賲鬲 賳爻禺丞 賲賳 鬲乇禺賷氐 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞\n"
-" 賲毓 丕賱亘乇賳丕賲噩; 賮賷 丨丕賱丞 毓丿賲 鬲爻賱賲 丕賱乇禺氐丞 乇丕爻賱 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞 毓賱賶 "
-"丕賱毓賳賵丕賳 丕賱鬲丕賱賷\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307, USA.\n"
-"\n"
-" 卮賰乇 禺丕氐 丕賱賶:\n"
-" - pfm2afm: \n"
-"\t 賲賳 Ken Borgendale:\n"
-"\t 賷丨賵賾賱 禺胤賵胤 .pfm 賮賷 Windows 丕賱賶 禺胤賵胤 .afm (Adobe Font Matrix)\n"
-" - type1inst:\n"
-"\t 賲賳 James Macnicol: \n"
-"\t 賷賵賱丿 type1inst 賲賱賮丕鬲 fonts.dir 賵 fonts.scale 賵 Fontmap.\n"
-" - ttf2pt1: \n"
-"\t 賲賳 Andrew Weeks, Frank Siegert, Thomas Henlich 賵 Sergey Babkin \n"
-" 賷丨賵賱 禺胤賵胤 ttf 丕賱賶 禺胤賵胤 afm 賵 pfb\n"
+msgid "Connect %s"
+msgstr "丕鬲氐賱 亘賭 %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "丨賵賱"
+msgid "Restarting CUPS..."
+msgstr "噩丕乇賷 丕毓丕丿丞 鬲卮睾賷賱 CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "賯丕卅賲丞 丕賱禺胤賵胤"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Printing/Scanning/Photo Cards on \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "禺賷丕乇丕鬲 賲鬲賯丿賲丞"
+msgid "Duplicate mount point %s"
+msgstr "賳賯胤丞 鬲丨賲賷賱 賲賰乇乇賾丞 %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "丕禺匕賮 丕賱禺胤賵胤"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "if set to yes, run chkrootkit checks."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "丕丨氐賱 毓賱賶 禺胤賵胤 Windows"
+msgid "Connection Configuration"
+msgstr "丕毓丿丕丿丕鬲 丕賱賵氐賱丞"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "丕爻鬲賷乇丕丿 丕賱禺胤賵胤"
+msgid "Unknown|Generic"
+msgstr "睾賷乇 賲毓乇賵賮|毓丕賲"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"賮賷 丕賱賵賯鬲 丕賱匕賷 鬲賯賵賲 賮賷賴 亘鬲孬亘賷鬲 Mandrake Linux, 賯丿 賷賰賵賳 鬲賲 鬲丨丿賷孬\n"
+"亘毓囟 丕賱丨夭賲 賲賳匕 丕?氐丿丕乇 丕賱賲亘丿卅賷, 乇亘賲丕 賷賰賵賳 鬲賲 丕氐賱丕丨 亘毓囟 丕賱毓賷賵亘\n"
+"兀賵 鬲賲 丨賱 丕賱賲卮丕賰賱 丕?賲賳賷丞. 賱賰賷 鬲爻鬲賮賷丿 賲賳 賴匕賴 丕賱鬲丨丿賷孬丕鬲,賷賲賰賳賰\n"
+"丕?賳 鬲賳夭賷賱 賴匕賴 丕賱鬲丨丿賷孬丕鬲 毓亘乇 丕?賳鬲乇賳鬲. 丕禺鬲乇\n"
+"\"賳毓賲\" 丕匕丕 賰丕賳鬲 賱丿賷賰 賵氐賱丞 丕賳鬲乇賳鬲 毓丕賲賱丞, 兀賵 \"?\" 丕匕丕 賰賳鬲 鬲賮囟賱\n"
+"鬲孬亘賷鬲 賴匕賴 丕賱鬲丨丿賷孬丕鬲 ?丨賯丕賸.\n"
+"\n"
+"丕禺鬲賷丕乇 \"賳毓賲\" 賷毓乇囟 賯丕卅賲丞 亘丕?賲丕賰賳 丕賱鬲賷 賷賲賰賳 賲賳賴丕 丕賱丨氐賵賱\n"
+"毓賱賶 丕賱鬲丨丿賷孬丕鬲. 丕禺鬲乇 丕賱賲賰丕賳 丕賱兀賯乇亘 丕賱賷賰. 爻賷鬲賲 毓乇囟 賯丕卅賲丞 亘丕賱丨夭賲\n"
+"乇丕噩毓 丕禺鬲賷丕乇丕鬲賰, 孬賲 丕囟睾胤 \"孬亘賾鬲\" 賱鬲賳夭賷賱 賵 鬲孬亘賷鬲\n"
+"丕賱丨夭賲 丕賱賲禺鬲丕乇丞, 兀賵 \"丕賱睾丕亍\" ?丨亘丕胤 丕賱鬲丨丿賷孬."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "丕賳鬲賴賶"
+msgid "Quit"
+msgstr "禺乇賵噩"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs restart"
+msgid "Myanmar"
+msgstr "賲賷丕賳賲丕乇"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "兀亘胤賱 賲賱賮丕鬲 丕賱禺胤賵胤"
+msgid "Auto allocate"
+msgstr "鬲丨丿賷丿 丌賱賷"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "兀毓丿 鬲卮睾賷賱 XFS"
+msgid "Check bad blocks?"
+msgstr "鬲丨賯賯 賲賳 丕賱亘賱賵賰丕鬲 丕賱爻賷卅丞責"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "兀亘胤賱 丕賱賲賱賮丕鬲 丕賱賲丐賯鬲丞"
+msgid "Other MultiMedia devices"
+msgstr "兀噩賴夭 賵爻丕卅胤 賲鬲毓丿丿丞 兀禺乇賶"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "亘賳丕亍 type1inst"
+msgid "No remote machines"
+msgstr "賱丕 兀噩賴夭丞 亘毓賷丿丞"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "鬲丨賵賷賱 禺胤賵胤 pfm"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"兀賴賱丕賸 亘賰賲 賮賷 賲毓丕賱噩 丕毓丿丕丿 丕賱胤丕亘毓丕鬲\n"
+"\n"
+"賴匕丕 丕賱賲毓丕賱噩 爻賷爻丕毓丿賰 毓賱賶 鬲孬亘賷鬲 丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 亘賴匕丕 丕賱賰賲亘賷賵鬲乇.\n"
+"\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 胤丕亘毓丞/胤丕亘毓丕鬲 賲賵氐賵賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞, 賮囟賱丕賸 賯賲 亘鬲賵氐賷賱賴丕 丕賱賶 賴匕丕 "
+"丕賱賰賲亘賷賵鬲乇 賵 賯賲 亘鬲卮睾賷賱賴丕 賰賷 賷鬲賲 丕賱鬲丨賯賯 賲賳賴丕/賲賳賴賲 丌賱賷丕賸.\n"
+"\n"
+" 丕賳賯乇 \"丕賱鬲丕賱賷\" 毓賳丿賲丕 鬲賰賵賳 賲爻鬲毓丿丕賸, 賵 毓賱賶 \"丕賱睾丕亍\" 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丿丕丿 "
+"丕賱胤丕亘毓丞/丕賱胤丕亘毓丕鬲 丕賱丌賳."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "鬲丨賵賷賱 禺胤賵胤 ttf"
+msgid "Authentication NIS"
+msgstr "鬲丨賯賯 NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencing"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "禺賷丕乇 ``鬲卮丿賷丿 禺賷丕乇丕鬲 爻胤乇 丕賱兀賵丕賲乇`` 亘丿賵賳 賯丕卅丿丞 賲賳 丿賵賳 賰賱賲丞 賲乇賵乇"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "鬲丨賵賷賱 丕賱禺胤賵胤"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賲賲賰賳丞 丨丕賱賷丕"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "鬲賲 鬲孬亘賷鬲 禺胤賵胤 True Type"
+msgid "Card IO_0"
+msgstr "Card IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "乇噩丕亍 丕賳鬲馗乇 兀孬賳丕亍 毓賲賱賷丞 ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "丕賱廿賲丕乇丕鬲 丕賱毓乇亘賷丞 丕賱賲鬲丨丿丞"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "鬲孬亘賷鬲 禺胤賵胤 True Type"
+msgid "Card IO_1"
+msgstr "Card IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "賳賯賱 丕賱禺胤賵胤"
+msgid "Thailand"
+msgstr "鬲丕賷賱丕賳丿"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "丕亘丨孬 毓賳 丕賱禺胤賵胤 賮賷 丕賱賯丕卅賲丞 丕賱賲孬亘鬲丞"
+msgid "Routers:"
+msgstr "丕賱賲賵噩賴丕鬲:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "賱賲 兀鬲賲賰賳 賲賳 廿賷噩丕丿 兀賷 禺胤.\n"
+msgid "Kazakhstan"
+msgstr "賰丕夭丕禺爻鬲丕賳"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "兀毓丿 丕禺鬲賷丕乇 丕賱禺胤賵胤 丕賱氐丨賷丨丞"
+msgid "Display all available remote CUPS printers"
+msgstr "丕毓乇囟 賰賱 胤丕亘毓丕鬲 CUPS 丕賱亘毓賷丿丞 丕賱賲鬲賵賮乇丞"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "賱賲 兀鬲賲賰賳 賲賳 丕賷噩丕丿 兀賷 禺胤賵胤 賮賷 鬲噩夭卅丕鬲賰 丕賱賲丨賲賱丞"
+msgid "Mandrake Linux Installation %s"
+msgstr "鬲孬亘賷鬲 Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "賱丕 鬲賵噩丿 禺胤賵胤"
+msgid "Thai keyboard"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲丕賷賱丕賳丿賷丞"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "鬲丨賱賷賱 賰賱 丕賱禺胤賵胤"
+msgid "Dialup options"
+msgstr "禺賷丕乇丕鬲 丕賱廿鬲氐丕賱"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "丕丨匕賮 丕禺鬲賷丕乇 丕賱禺胤賵胤 丕賱賲孬亘鬲丞"
+msgid "Bouvet Island"
+msgstr "噩夭賷乇丞 亘賵賮賷賴"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "丕亘丨孬 賮賷 丕賱禺胤賵胤 丕賱賲孬亘鬲丞"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"兀賴賱丕 亘賰 賮賷 兀丿丕丞 賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲!\n"
-"\n"
-"%s\n"
+"睾賷乇 丕賱賯乇氐 丕賱賲丿賲噩!\n"
"\n"
-"丕囟睾胤 毓賱賶 鬲賴賷卅丞 賱鬲卮睾賷賱 賲毓丕賱噩 丕賱廿毓丿丕丿."
+"賮囟賱丕賸 兀丿禺賱 丕賱賯乇氐 丕賱賲丿賲噩 丕賱賲爻賲賶 \"%s\" 賮賷 丕賱爻賵丕賯丞 賵 丕賳賯乇 賲賵丕賮賯 毓賳丿賲丕 鬲賳鬲賴賷.\n"
+"丕匕丕 賱賲 賷賰賳 丕賱賯乇氐 賱丿賷賰, 丕囟睾胤 丕賱睾丕亍 賱鬲噩賳亘 丕賱鬲孬亘賷鬲 賲賳 賴匕丕 丕賱賯乇氐 丕賱賲丿賲噩."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "廿毓丿丕丿丕鬲 賲卮丕乇賰丞 廿鬲氐丕賱 丕賱廿賳鬲乇賳鬲"
+msgid "Polish"
+msgstr "丕賱亘賵賱賳丿賷丞"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "賱賲 賷鬲賲 丕毓丿丕丿 兀賷 賲卮丕乇賰丞 丕鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "鬲賲 毓賲賱 丕賱鬲賳氐賷亘, 賵 賴賵 賲賲賰賾賻賳 丕賱丌賳."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "鬲賲 毓賲賱 丕賱鬲賳氐賷亘, 賵 賱賰賳賴 睾賷乇 賲賲賰賾賻賳 丕賱丌賳"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"賱賲 賷鬲賲 丕賰鬲卮丕賮 賲賵丕卅賲 丕賷孬乇賳鬲 毓賱賶 賳馗丕賲賰. 賮囟賱丕賸 賯賲 亘鬲卮睾賷賱 兀丿丕丞 鬲賴賷卅丞 丕賱毓鬲丕丿."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"鬲賲 廿毓丿丕丿 賰賱 卮卅.\n"
-"賷賲賰賳賰 丕賱丌賳 賲卮丕乇賰丞 丕鬲氐丕賱 丕賱廿賳鬲乇賳鬲 賲毓 丕賱兀噩賴夭丞 丕賱兀禺乇賶 賮賷 卮亘賰鬲賰 丕賱賲丨賱賷丞 亘丕爻鬲禺丿丕賲 "
-"廿毓丿丕丿 丕賱卮亘賰丞 丕賱兀賵鬲賵賲丕鬲賷賰賷 (DHCP)."
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "賰丕賳鬲 賴賳丕賰 賲卮丕賰賱 賮賷 鬲孬亘賷鬲 丕賱丨夭賲丞 %s"
+msgid "No hard drives found"
+msgstr "賳毓匕乇 丕賷噩丕丿 兀賯乇丕氐 氐賱亘丞"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "噩丕乇賷 廿毓丿丕丿 丕賱賳氐賵氐 丕賱亘乇賲噩賷丞 賵 鬲孬亘賷鬲 丕賱亘乇賲噩賷丕鬲 賵 亘丿亍 丕賱禺丿賲丕鬲..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "噩丕乇賷 丕賱廿毓丿丕丿..."
+msgid "2 buttons"
+msgstr "夭乇賾賷賳"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"鬲賲 丕賷噩丕丿 鬲毓丕乇囟 賮賷 毓賳賵丕賳 丕賱卮亘賰丞 丕賱賲丨賱賷丞 丕賱賲亘丿卅賷 賮賷 丕賱廿毓丿丕丿 丕賱丨丕賱賷 賱賭%s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "賲丕 賴賵 賳賵毓 賵氐賱丞 ISDN 賱丿賷賰責"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "丕賱卮亘賰丞 丕賱賲丨賱賷丞 賱賲 鬲賳鬲賴 亘賭`0', 噩丕乇賷 丕賱禺乇賵噩."
+msgid "Label"
+msgstr "毓賳賵丕賳"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "廿毓丕丿丞 廿毓丿丕丿 丕賱賵丕噩賴丞 賵 禺丕丿賲 DHCP"
+msgid "Save on floppy"
+msgstr "丕丨賮馗 毓賱賶 賯乇氐 賲乇賳"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "丕賱廿賷噩丕乇 丕賱兀賯氐賶 (亘丕賱孬賵丕賳賷)"
+msgid "Printer auto-detection"
+msgstr "鬲丨賯賯 丌賱賷 賲賳 丕賱胤丕亘毓丕鬲"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "丕賱廿賷噩丕乇 丕賱廿賮鬲乇丕囟賷 (亘丕賱孬賵丕賳賷)"
+msgid "Which of the following is your ISDN card?"
+msgstr "兀賷 賲賳 丕賱丌鬲賷 賴賷 亘胤丕賯丞 ISDN 丕賱禺丕氐丞 亘賰責"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "丨丿賵丿 DHCP end"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS 亘乇賵鬲賵賰賵賱 卮丕卅毓 賱賲卮丕乇賰丞 丕賱賲賱賮丕鬲 毓賱賶 卮亘賰丕鬲 TCP/IP.\n"
+"賴匕賴 丕賱禺丿賲丞 鬲賵賮乇 賵馗丕卅賮 NFS 賱賱兀噩賴夭丞 丕賱禺丕丿賲丞, 賵 丕賱鬲賷 賷鬲賲 鬲賴賷卅鬲賴丕 毓賳 胤乇賷賯\n"
+"賲賱賮 /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "丨丿賵丿 DHCP start"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "丕爻賲 丕賱賳胤丕賯 丕賱丿丕禺賱賷"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Notice, a label changed:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "毓賳賵丕賳 IP 賱禺丕丿賲 DNS"
+msgid "Number of capture buffers:"
+msgstr "Number of capture buffers:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "毓賳賵丕賳 IP 賱禺丕丿賲 DHCP (賴匕丕)"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Your choice? (0/1, default `%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"鬲賴賷卅丞 禺丕丿賲 DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"賴賳丕 賷賲賰賳賰 丕禺鬲賷丕乇 禺賷丕乇丕鬲 賲禺鬲賱賮丞 賱鬲賴賷卅丞 禺丕丿賲 DHCP.\n"
-"丕匕丕 賱賲 鬲賰賳 賳賴賱賲 賲丕匕丕 賷毓賳賷 丕賱禺賷丕乇 賮賰賱 賲丕 毓賱賷賰 賴賵 鬲乇賰賴 賰賲丕 賴賵.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "毓賳賵丕賳 丕賱卮亘賰丞 丕賱賲丨賱賷丞"
+msgid "French"
+msgstr "丕賱賮乇賳爻賷丞"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"賷賲賰賳賳賷 丨賮馗 丕賱鬲賴賷卅丞 賵 丕賮鬲乇丕囟 兀賳賰 賯賲鬲 亘廿毓丿丕丿 禺丕丿賲 DHCP 賲爻亘賯丕賸; 賮賷 賴匕賴 丕賱丨丕賱 "
-"鬲兀賰丿 賲賳 兀賳賳賷 兀爻鬲胤賷毓 賯乇丕亍丞 丕賱卮亘賰丞 丕賱鬲賷 鬲爻鬲禺丿賲賴丕 賱賱卮亘賰丞 丕賱賲丨賱賷丞 亘卮賰賱 氐丨賷丨; "
-"爻兀賯賵賲 亘廿毓丕丿丞 鬲賴賷卅鬲賴丕 賵 賱賳 兀賯賵賲 亘兀賷 卮卅 鬲噩丕賴 鬲賴賷卅丞 禺丕丿賲 DHCP.\n"
-"\n"
-"賲丿禺賱 DNS 丕賱廿賮鬲乇丕囟賷 賴賵 丕爻賲 丕賱禺丕丿賲 丕賱賲禺亘卅賷 毓賱賶 丕賱噩丿丕乇 丕賱賳丕乇賷. 賷賲賰賳賰 丕亘丿丕賱 匕賱賰 "
-"亘毓賳賵丕賳 IP 賱賱賭DNS 丕賱禺丕氐 亘賲賵賮乇 禺丿賲丞 丕賱廿賳鬲乇賳鬲, 賲孬賱.\n"
-"\t\t \n"
-"丕賳 賱賲 賷賰賳 匕賱賰, 賷賲賰賳賳賷 丕毓丿丕丞 鬲賴賷卅丞 丕賱賵丕噩賴丞 賵 丕毓丿丕丞 鬲賴賷卅丞 禺丕丿賲 DHCP 賱賰.\n"
-"\n"
+msgid "Czech (QWERTY)"
+msgstr "丕賱鬲卮賷賰賷丞 (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "噩丕乇賷 丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "噩賴丕夭 丕賱卮亘賰丞"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "賲賱禺氐"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"丕賱廿毓丿丕丿 丕賱丨丕賱賷 賱賭`%s':\n"
-"\n"
-"丕賱卮亘賰丞: %s\n"
-"毓賳賵丕賳 丕賱賭IP: %s\n"
-"氐賮丞 丕賱賭IP: %s\n"
-"丕賱賲卮睾賱: %s"
+" (丕賱賲賳丕賮匕 丕賱賲鬲賵丕夭賷丞: /dev/lp0, /dev/lp1, ..., 賲賲丕卮賱 賱賭 LPT1:, LPT2:, ..., "
+"胤丕亘毓丞 USB 丕賱兀賵賱賷: /dev/usb/lp0, 胤丕亘毓丞 USB 丕賱孬丕賳賷丞: /dev/usb/lp1, ...)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "鬲賴賷卅丞 丕賱賵丕噩賴丞 丕賱丨丕賱賷丞"
+msgid "Next"
+msgstr "丕賱鬲丕賱賷"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "兀馗賴乇 鬲賴賷卅丞 丕賱賵丕噩賴丞 丕賱丨丕賱賷丞"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "賷賲賰賳賰 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓 毓賱賶 丕賱鬲噩夭卅丞 %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "賱丕 (賱賱禺亘乇丕亍 賮賯胤)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "丕毓丿丕丞 鬲賴賷卅丞 丌賱賷丞"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"鬲丨匕賷乇, 賲賵丕卅賲 丕賱卮亘賰丞 (%s) 賲毓丿賾 賲爻亘賯丕賸.\n"
"\n"
-"賴賱 鬲乇賷丿 丕毓丕丿丞 丕賱鬲賴賷卅丞 丌賱賷丕賸?\n"
+"兀賴賱丕賸 亘賰賲.\n"
"\n"
-"賷賲賰賳賰 丕賱賯賷丕賲 亘匕賱賰 賷丿賵賷丕賸 賱賰賳 賷噩亘 兀賳 鬲賰賵賳 毓賱賶 毓賱賲 亘賲丕 鬲賮毓賱."
+"賲毓丕賵賲賱丕鬲 丕賱鬲孬亘賷鬲 丕賱丌賱賷 賲賵噩賵丿丞 毓賱賶 丕賱賯爻賲 丕賱兀賷爻乇"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "賵丕噩賴丞 丕賱卮亘賰丞 賲毓丿賾丞 賲爻亘賯丕!"
+msgid "Puerto Rico"
+msgstr "亘賵乇鬲賵乇賷賰賵"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "賮囟賱丕賸 丕禺鬲乇 賲賵丕卅賲 丕賱卮亘賰丞 丕賱匕賷 爻賷鬲賲 亘賴 丕賱廿鬲氐丕賱 亘丕賱卮亘賰丞 丕賱賲丨賱賷丞."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"丨夭賲丞 'ImageMagick' 囟乇賵乇賷丞 賱賰賷 賷鬲賲 丕賰賲丕賱 丕賱鬲賴賷卅丞.\n"
+"丕囟睾胤 \"賲賵丕賮賯\" 賱鬲孬亘賷鬲 'ImageMagick' 兀賵 \"丕賱睾丕亍\" 賱賱禺乇賵噩"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "丕賱賱賷鬲賵丕賳賷丞 \"氐賮 乇賯賲賷\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"賷賵噩丿 賲賵丕卅賲 卮亘賰丞 賵丕丨丿 賮賯胤 賲毓丿賾 毓賱賶 賳馗丕賲賰:\n"
+"爻賷鬲賲 丨匕賮 賴匕賴 丕賱丨夭賲 賱賰賷 鬲鬲賲 鬲乇賯賷丞 丕賱賳馗丕賲: %s\n"
"\n"
-"%s\n"
"\n"
-"賳丨賳 毓賱賶 賵卮賰 丕毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞 亘丕爻鬲禺丿丕賲 賴匕丕 丕賱賲賵丕卅賲."
+"賴賱 鬲乇賷丿 丨匕賮 賴匕賴 丕賱丨夭賲 賮毓賱丕賸責\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "賵丕噩賴丞 丕賱卮亘賰丞 "
+msgid "Anguilla"
+msgstr "兀賳睾賵賷賱丕"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"賱賲 賷鬲賲 丕賰鬲卮丕賮 賲賵丕卅賲 丕賷孬乇賳鬲 毓賱賶 賳馗丕賲賰. 賮囟賱丕賸 賯賲 亘鬲卮睾賷賱 兀丿丕丞 鬲賴賷卅丞 丕賱毓鬲丕丿."
+msgid "NIS Domain"
+msgstr "賳胤丕賯 NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "賱丕 賲賵丕卅賲 卮亘賰丞 毓賱賶 賳馗丕賲賰"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"-賲賱賮賾丕鬲 丕賱賲爻鬲禺丿賲:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "丕賱賵丕噩賴丞 %s"
+msgid "Antarctica"
+msgstr "丕賱賯胤亘 丕賱噩賳賵亘賷"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "丕賱賵丕噩賴丞 %s (亘丕爻鬲禺丿丕賲 丕賱賵丨丿丞 %s)"
+msgid "Mount options"
+msgstr "禺賷丕乇丕鬲 丕賱鬲丨賲賷賱"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "噩賴丕夭 丕賱卮亘賰丞"
+msgid "Jamaica"
+msgstr "噩丕賲丕賷賰丕"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"賮囟賱丕賸 兀丿禺賱 丕爻賲 丕賱賵丕噩賴丞 丕賱賲鬲氐賱丞 亘丕賱廿賳鬲乇賳鬲.\n"
-"\n"
-"兀賲孬賱丞:\n"
-"\t\tppp+ 賱賵氐賱丕鬲 丕賱賲賵丿賲 賵 DSL, \n"
-"\t\teth0, 兀賵 eth1 賱賵氐賱丕鬲 丕賱賰賷亘賱, \n"
-"\t\tippp+ 賱賵氐賱丕鬲 ISDN.\n"
+"毓賷賳 丕賱兀噩賴夭丞 丕賱禺丕賲 丕賱賶 兀噩賴夭丞 賮賷 賵囟毓 丕賱賰賱賷卮賷賴 (賲孬賱 鬲噩夭卅丕鬲\n"
+"丕賱兀賯乇丕氐 丕賱氐賱亘丞), 賱賱丕爻鬲禺丕賲 賮賷 鬲胤亘賷賯丕鬲 賲孬賱 Oracle 兀賵 賲卮睾賱丕鬲 DVD"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 噩賴丕夭賰 賱賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲.\n"
-"亘丕爻鬲禺丿丕賲 賴匕賴 丕賱賲賷夭丞 爻賷賲賰賳 賱賱丨賵丕爻賷亘 丕賱兀禺乇賶 賮賷 丕賱卮亘賰丞 丕賱賲丨賱賷丞 兀賳 鬲爻鬲禺丿賲 賵氐賱丞 "
-"丕賱賰賲亘賷賵鬲乇 賱賴匕丕 丕賱丨丕爻賵亘.\n"
-"\n"
-"鬲兀賰丿 賲賳 兀賳賰 賯賲鬲 亘鬲賴賷卅丞 賵氐賱丞 丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 亘丕爻鬲禺丿丕賲 drakconnect 賯亘賱 "
-"丕賱賲鬲丕亘毓丞.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"賲賱丨賵馗丞: 鬲丨鬲丕噩 丕賱賶 賲賵丕卅賲 賱賱卮亘賰丞 賰賷 鬲賯賵賲 亘廿毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞 (LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "Please wait, preparing installation..."
+msgstr "丕賳鬲乇 賲賳 賮囟賱賰, 噩丕乇賷 丕賱鬲丨囟賷乇 賱賱鬲孬亘賷鬲..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "賲卮丕乇賰丞 廿鬲氐丕賱 丕賱廿賳鬲乇賳鬲 賲賲賰賾賻賳丞 丕賱丌賳."
+msgid "Czech (QWERTZ)"
+msgstr "丕賱鬲卮賷賰賷丞 (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "噩丕乇賷 鬲賲賰賷賳 丕賱禺賵丕丿賲..."
+msgid "Track network card id (useful for laptops)"
+msgstr "鬲鬲亘毓 賴賵賷丞 亘胤丕賯丞 丕賱卮亘賰丞 (賲賮賷丿 賱賱噩丕爻亘丕鬲 丕賱丿賮鬲乇賷丞)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "丕賴賲丕賱"
+msgid "The port number should be an integer!"
+msgstr "賷噩亘 兀賳 賷賰賵賳 乇賯賲 丕賱賲賳賮匕 乇賯賲丕賸 氐丨賷丨丕賸!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "廿毓丿丕丞 丕賱廿毓丿丕丿"
+msgid "You must choose an image file first!"
+msgstr "賷噩亘 丕禺鬲賷丕乇 賲賱賮 氐賵乇丞 兀賵賱丕賸!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "鬲賲賰賷賳"
+msgid "Restore from Hard Disk."
+msgstr "丕爻鬲毓丿 賲賳 丕賱賯乇氐 丕賱氐賱亘"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"鬲賲 鬲賳氐賷亘 賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賲爻亘賯丕賸.\n"
-"賵 賴賷 賲毓胤賱丞 丨丕賱賷丕賸.\n"
-"\n"
-"賲丕匕丕 鬲乇賷丿 兀賳 鬲賮毓賱責"
+msgid "Add to LVM"
+msgstr "丕囟丕賮丞 丕賱賶 LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "DNS server"
+msgstr "禺丕丿賲 DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "賲卮丕乇賰丞 丕鬲氐丕賱 丕賱廿賳鬲乇賳鬲 睾賷乇 賲賲賰賾賻賳丞 丕賱丌賳."
+msgid "Trinidad and Tobago"
+msgstr "鬲乇賷賳賷丕丿 賵 鬲賵亘丕噩賵"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "噩丕乇賷 鬲毓胤賷賱 丕賱禺賵丕丿賲..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD 賵 LPRng 賱丕 鬲丿毓賲 胤丕亘毓丕鬲 IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "鬲毓胤賷賱"
+msgid "simple"
+msgstr "亘爻賷胤"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"鬲賲 毓賲賱 賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賲爻亘賯丕賸.\n"
-"賵 賴賷 賲賲賰賾賳丞 丨丕賱賷丕賸.\n"
-"\n"
-"賲丕匕丕 鬲乇賷丿 兀賳 鬲賮毓賱責"
+msgid "Clear all"
+msgstr "兀賲爻丨 丕賱賰賱"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "賲卮丕乇賰丞 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 賲賲賰賳丞 丨丕賱賷丕"
+msgid "No test pages"
+msgstr "賱丕 氐賮丨丕鬲 丕禺鬲亘丕乇賷丞"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "丌爻賮賵賳, 賳丨賳 賳丿毓賲 丕氐丿丕乇丕鬲 丕賱賳賵丕丞 2.4"
+msgid "Adapter %s: %s"
+msgstr "丕賱賲丨賵賾賱 %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"賱丕 賷賵噩丿 賲鬲氐賮丨 賲孬亘鬲 毓賱賶 賳馗丕賲賰, 賮囟賱丕賸 賯賲 亘鬲孬亘賷鬲 賲鬲氐賮丨 丕匕丕 賰賳鬲 鬲乇睾亘 賮賷 鬲氐賮丨 賳馗丕賲 "
-"丕賱賲爻丕毓丿丞"
+msgid "Falkland Islands (Malvinas)"
+msgstr "噩夭乇 賮賵賰賱丕賳丿"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
-msgstr "丕賱賲爻丕乇"
+msgid "Unknown model"
+msgstr "胤乇丕夭 睾賷乇 賲毓乇賵賮"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "group :"
-msgstr "賲噩賲賵毓丞 :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "if set to yes, check files/directories writable by everybody."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "丕賱鬲丨賯賯"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "丕賱賲爻鬲禺丿賲 :"
+msgid "Backup Now"
+msgstr "賯賲 亘丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 丕賱丌賳"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "廿禺鬲賷丕乇 丕賱賲爻丕乇"
+msgid "/_File"
+msgstr "/_賲賱賮"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "毓賳丿 丕賱鬲兀卮賷乇 賱賳 賷鬲賲 鬲睾賷賷乇 丕賱賲丕賱賰 賵 丕賱賲噩賲賵毓丞"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "噩丕乇賷 丨匕賮 丕賱胤丕亘毓丞 賲賳 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "丕爻鬲禺丿賲 group id 賱賱鬲賳賮賷匕"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "丕爻鬲禺丿賲 owner id 賱賱鬲賳賮賷匕"
+msgid "Tamil (ISCII-layout)"
+msgstr "丕賱鬲丕賲賷賱 (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"賷購爻鬲禺丿賲 賱賱丿賱賷賱:\n"
-" 賷賲賰賳 賮賯胤 賱賲丕賱賰 賴匕丕 丕賱丿賱賷賱 兀賵 丕賱賲賱賮 丕賱睾丕丐賴"
+msgid "Mayotte"
+msgstr "賲丕賷賵鬲"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Creating auto install floppy..."
+msgstr "噩丕乇賷 丕賳卮丕亍 賯乇氐 丕賱鬲孬亘賷鬲 丕賱丌賱賷..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Searching for scanners ..."
+msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Partitioning"
+msgstr "鬲噩夭卅丞 丕賱兀賯乇丕氐"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr "丕賱禺丕氐賷丞"
+msgid "Russia"
+msgstr "乇賵爻賷丕"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "丕賱鬲氐丕乇賷丨"
+msgid "ethernet card(s) detected"
+msgstr "鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞/亘胤丕賯丕鬲 丕賷孬乇賳鬲"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "丕賱賲爻鬲禺丿賲 丕賱丨丕賱賷"
+msgid "Syslog"
+msgstr "syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "丕爻鬲毓乇囟"
+msgid "Can't create catalog!"
+msgstr "鬲毓匕乇 丕賳卮丕亍 丕賱賰鬲丕賱賵睾!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
-msgstr "丨乇賾乇 丕賱賯丕毓丿丞 丕賱丨丕賱賷丞"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "丨乇賾乇"
+msgid "Not enough free space for auto-allocating"
+msgstr "賱丕 鬲賵噩丿 賲爻丕丨丞 賰丕賮賷丞 賱賱鬲丨丿賷丿 丕賱丌賱賷"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "丕丨匕賮 丕賱賯丕毓丿丞 丕賱賲禺鬲丕乇丞"
+msgid "Set root password"
+msgstr "毓賷賾賳 賰賱賲丞 賲乇賵乇 丕賱賲爻鬲禺丿賲 丕賱噩匕乇"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "delete"
-msgstr "丨匕賮"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"賱丕 賷賵噩丿 賲卮睾賱 賲賮鬲賵丨 丕賱賲氐丿乇 賱亘胤丕賯丞 丕賱氐賵鬲 (%s), 賱賰賳 賴賳丕賰 賲卮睾賱 鬲噩丕乇賷 賮賷 \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "兀囟賮 賯丕毓丿丞 噩丿賷丿丞 賮賷 丕賱賳賴丕賷丞"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "亘毓丿 鬲睾賷賷乇 丨噩賲 丕賱鬲噩夭卅丞 %s, 賮廿賳 賰賱 丕賱亘賷丕賳丕鬲 毓賱賶 賴匕賴 丕賱鬲噩夭卅丞 爻鬲賮賯丿"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "add a rule"
-msgstr "丕囟丕賮丞 賯丕毓丿丞"
+msgid "Internet connection configuration"
+msgstr "廿毓丿丕丿丕鬲 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "丕賳賯賱 丕賱賯丕毓丿丞 丕賱賲禺鬲丕乇丞 丕賱賶 鬲丨鬲 亘賲爻鬲賵賶 賵丕丨丿"
+msgid "Scanning for TV channels"
+msgstr "噩丕乇賷 囟亘胤 賯賳賵丕鬲 丕賱鬲賱賮丕夭"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Down"
-msgstr "鬲丨鬲"
+msgid "Kernel:"
+msgstr "丕賱賳賵丕丞:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "丕賳賯賱 丕賱賯丕毓丿丞 丕賱賲禺鬲丕乇丞 丕賱賶 賮賵賯 亘賲爻鬲賵賶 賵丕丨丿"
+msgid "/_About..."
+msgstr "/_丨賵賱..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Up"
-msgstr "賮賵賯"
+msgid "Bengali"
+msgstr "丕賱亘賳睾丕賱賷丞"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "丕禺鬲乇 賲賱賮 鬲氐丕乇賷丨 賱乇丐賷鬲賴/鬲丨乇賷乇賴"
+msgid "Preference: "
+msgstr "丕賱鬲賮囟賷賱: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"賷購爻鬲禺丿賲 Drakperm 賱丕爻鬲毓乇丕囟 丕賱賲賱賮丕鬲 丕賱鬲賷 賷鬲賲 丕爻鬲禺丿丕賲賴丕 賱鬲毓丿賷賱 丕賱氐賱丕丨賷丕鬲, 賵 "
-"丕賱賲賱丕賰 賵 丕賱賲爻鬲禺丿賲賷賳 亘丕爻鬲禺丿丕賲 msec.\n"
-"賷賲賰賳賰 賰匕賱賰 鬲丨乇賷乇 賯賵丕毓丿賰 丕賱禺丕氐丞 丕賱鬲賷 爻鬲購賰鬲賻亘 賮賵賯 丕賱賯賵丕賴丿 丕賱廿賮鬲乇丕囟賷丞."
+msgid "Wizard..."
+msgstr "丕賱賲毓丕賱噩..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "permissions"
-msgstr "丕賱鬲氐丕乇賷丨"
+msgid "Services: %d activated for %d registered"
+msgstr "丕賱禺丿賲丕鬲: %d 賲賳卮賾胤丞 賱賭 %d 賲爻噩賱丞"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "group"
-msgstr "丕賱賲噩賲賵毓丞"
+msgid "Create a bootdisk"
+msgstr "兀賳卮卅 賯乇氐 廿賯賱丕毓"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "user"
-msgstr "丕賱賲爻鬲禺丿賲"
+msgid "Solomon Islands"
+msgstr "噩夭乇 爻賱賷賲丕賳"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "path"
-msgstr "丕賱賲爻丕乇"
+msgid "(module %s)"
+msgstr "(丕賱賵丨丿丞 %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "丕賱賲賰丕賳 毓賱賶 賲賱賮 install.cfg"
+msgid "Workgroup"
+msgstr "賲噩賲賵毓丞 丕賱毓賲賱"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"賮囟賱丕賸 丨丿丿 賲賰丕賳 賲賱賮 auto_install.cfg.\n"
-"\n"
-"丕鬲乇賰 丕賱丨賯賱 賮丕乇睾丕賸 丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕毓丕丿 賵囟毓 丕賱鬲孬亘賷鬲 丕賱丕賱賷.\n"
+msgid "Printer host name or IP"
+msgstr "丕爻賲 賲爻鬲囟賷賮 丕賱胤丕亘毓丞 兀賵 丕賱賭 IP"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr "鬲毓匕乇 丕賷噩丕丿 氐賵乇丞 CD 兀賵 DVD, 賮囟賱丕賸 丕賳爻禺 亘乇賳丕賲噩 丕賱鬲孬亘賷賳 賵賲賱賮丕鬲 rpm"
+msgid "Host Path or Module"
+msgstr "賵丨丿丞 兀賵 賲爻丕乇 丕賱賲爻鬲囟賷賮"
-#
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "鬲毓匕乇 丕賷噩丕丿 氐賵乇丞"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "丕爻賲 丕賱胤丕亘毓丞 賷噩亘 兀賳 賷丨鬲賵賷 賮賯胤 毓賱賶 丨乇賵賮 賵 兀乇賯丕賲 賵 卮丕乇胤丕鬲 鬲丨鬲賷丞"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installation image directory"
-msgstr "丿賱賷賱 氐賵乇丞 丕賱鬲孬亘賷鬲"
+msgid "Show current interface configuration"
+msgstr "兀馗賴乇 鬲賴賷卅丞 丕賱賵丕噩賴丞 丕賱丨丕賱賷丞"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"賮囟賱丕賸 兀禺亘乇 毓賳 賲賰丕賳 氐賵乇丞 丕賱鬲孬亘賷鬲.\n"
-"\n"
-"丕匕丕 賱賲 賷賰賳 賴賳丕賰 丿賱賷賱 賲賵噩賵丿, 賮囟賱丕賸 丕賳爻禺 賲丨鬲賵賷丕鬲 丕賱賯乇氐 丕賱賲丿賲噩 兀賵 賯乇氐 DVD.\n"
-"\n"
+msgid "Development"
+msgstr "鬲胤賵賷乇"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP end ip"
+msgid "Done"
+msgstr "丕賳鬲賴賶"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP start ip"
+msgid "Web Server"
+msgstr "禺丕丿賲 丕賱賵賷亘"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"爻賷爻賲丨 禺丕丿賲 DHCP 賱賱賰賲亘賷賵鬲乇丕鬲 丕賱兀禺乇賶 亘丕賱廿賯賱丕毓 亘丕爻鬲禺丿丕賲 PXE 賮賷 丨丿賵丿 丕賱毓賳丕賵賷賳 "
-"丕賱賲毓胤丕丞.\n"
-"\n"
-"毓賳賵丕賳 丕賱卮亘賰丞 %s 賷爻鬲禺丿賲 netmask %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
+msgstr "\t賱丕 鬲購囟賲賳 賲賱賮丕鬲 丕賱賳馗丕賲\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "丕賱賵丕噩賴丞 %s (毓賱賶 丕賱卮亘賰丞 %s)"
+msgid "Chile"
+msgstr "鬲卮賷賱賷"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "丕禺鬲乇 賵丕噩賴丞 丕賱卮亘賰丞 丕賱鬲賷 爻賷鬲賲 丕爻鬲禺丿丕賲賴丕 賱禺丕丿賲 DHCP."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
+msgstr ""
+"賲卮睾賱丕鬲 胤丕亘毓鬲賰 inkjet 丕賱鬲賷 鬲賲 鬲賵賮賷乇賴丕 賲賳 Lexmark 鬲丿毓賲 丕賱胤丕亘毓丕鬲 丕賱賲丨賱賷丞 賮賯胤, "
+"賱丕 賷丿毓賲 丕賱賲卮睾賱 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 兀賵 禺丕丿賲丕鬲 丕賱胤亘丕毓丞. 賮囟賱丕賸 賵氐賱 "
+"胤丕亘毓鬲賰 丕賱賶 賲賳賮匕 賲丨賱賷 兀賵 賯賲 亘鬲賴賷卅鬲賴丕 毓賱賶 丕賱賲丕賰賷賳丞 丕賱賲乇鬲亘胤丞 亘賴丕."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 噩賴丕夭賰 賱鬲孬亘賷鬲 禺丕丿賲 PXE 賰禺丕丿賲 DHCP\n"
-"賵 禺丕丿賲 TFTP 賱亘賳丕亍 禺丕丿賲 鬲孬亘賷鬲.\n"
-"亘丕爻鬲禺丿丕賲 賴匕賴 丕賱賲賷夭丞 鬲賰賵賳 丕賱丨賵丕爻賷亘 丕賱兀禺乇賶 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞 賯丕亘賱丞 賱賱鬲孬亘賷鬲 賲賳 "
-"賴匕丕 丕賱噩賴丕夭.\n"
-"\n"
-"鬲兀賰丿 賲賳 兀賳賰 賯賲鬲 亘鬲賴賷卅丞 丕賱卮亘賰丞/丕賱廿賳鬲乇賳鬲 亘丕爻鬲禺丿丕賲 drakconnect 賯亘賱 丕賱賲鬲丕亘毓丞.\n"
+"丕賱噩賴丕夭 丕賱賲鬲毓丿丿 丕賱賵馗丕卅賮 丕賱禺丕氐 亘賰 鬲賲 鬲賴賷卅鬲賴 丌賱賷丕賸 賱賷鬲賲賰賳 賲賳 丕賱賲爻丨 丕賱囟賵卅賷. 賷賲賰賳賰 "
+"丕賱丌賳 丕爻鬲禺丿丕賲 丕賱賲爻禺 丕賱囟賵卅賷 亘丕爻鬲禺丿丕賲 \"scanimage\" (\"scanimage -d hp:%s\" "
+"賱鬲丨丿賷丿 丕賱賲丕爻丨 丕賱囟賵卅賷 丕匕丕 賰丕賳 賱丿賷賰 兀賰孬乇 賲賳 賵丕丨丿) 賲賳 爻胤乇 丕賱兀賵丕賲乇 兀賵 亘丕賱亘乇丕賲噩 "
+"丕賱乇爻賵賲賷丞 \"xscanimage\" 兀賵 \"xsane\". 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 GIMP, 賷賲賰賳賰 兀賷囟丕賸 丕賱賲爻丨 "
+"丕賱囟賵卅賷 亘丕爻鬲禺丿丕賲 丕賱賯賵丕卅賲 \"File\"/\"Acquire\". 卮睾賱 丕賱兀賲乇 \"man scanimage\" 賮賷 "
+"爻胤乇 丕賱兀賵丕賲乇 賱賱丨氐賵賱 毓賱賶 賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲.\n"
"\n"
-"賲賱丨賵馗丞: 鬲丨鬲丕噩 丕賱賶 賲賵丕卅賲 卮亘賰丞 賲禺氐氐 賱廿毓丿丕丿 丕賱卮亘賰丞 丕賱賲丨賱賷丞 (LAN)."
+"賱丕 鬲爻鬲禺丿賲 \"scannerdrake\" 賱賴匕丕 丕賱噩賴丕夭!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "鬲賴賷卅丞 禺丕丿賲 丕賱孬亘賷鬲"
+msgid "(already added %s)"
+msgstr "(鬲賲 丕囟丕賮丞 %s 賲爻亘賯丕)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "鬲賴賷卅丞 禺丕丿賲 PXE"
+msgid ", using command %s"
+msgstr ", 亘丕爻鬲禺丿丕賲 丕賱兀賲乇 %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "丕賳鬲馗乇 賲賳 賮囟賱賰, 噩丕乇賷 鬲毓賷賷賳 禺賷丕乇丕鬲 丕賱兀賲賳..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "賲賮丕鬲賷丨 Alt 賵 Shift 賮賷 賳賮爻 丕賱賵賯鬲"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "丕賳鬲馗乇 賲賳 賮囟賱賰, 噩丕乇賷 鬲毓賷賷賳 賲爻鬲賵賶 丕賱兀賲賳.."
+msgid "Flags"
+msgstr "Flags"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "鬲兀賰丿 丿賵乇賷"
+msgid "Add/Del Users"
+msgstr "兀囟賮/丕丨匕賮 丕賱賲爻鬲禺丿賲賷賳"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "禺賷丕乇丕鬲 丕賱賳馗丕賲"
+msgid "Host/network IP address missing."
+msgstr "毓賳賵丕賳 IP 賱賱賲爻鬲囟賷賮/丕賱卮亘賰丞 賲賮賯賵丿."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "禺賷丕乇丕鬲 卮亘賰丞"
+msgid "weekly"
+msgstr "兀爻亘賵毓賷賾丕"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "丕賱囟亘胤"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "毓賳賵丕賳 IP 丕賱賲丿購禺賱 賱賱賲爻鬲囟賷賮/丕賱卮亘賰丞 睾賷乇 氐丨賷丨.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "賴丕 賴賷 賯丕卅賲丞 賰丕賲賱丞 亘賰賱 賱賵丨丕鬲 丕賱亘賱丕丿 丕賱賲鬲賵賮乇丞"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "氐賮丨丞 丕禺鬲亘丕乇賷丞 亘丿賷賱丞 (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"賷賲賰賳 鬲毓賷賷賳 丕賱禺賷丕乇丕鬲 丕賱鬲丕賱賷丞 賱鬲禺氐賷氐\n"
-"兀賲賳 丕賱賳馗丕賲. 丕匕丕 賰賳鬲 鬲丨鬲丕噩 丕賱賶 賲夭賷丿 賲賳 丕賱卮乇丨, 丕賱賯 賳馗乇丞 毓賱賶 丕賱賲爻丕毓丿丞.\n"
+"丕匕丕 賰丕賳鬲 賱丿賷賰 賯賱 丕賱兀賯乇丕氐 賮賷 丕賱賯丕卅賲丞 兀丿賳丕賴, 丕囟睾胤 賲賵丕賮賯.\n"
+"丕匕丕 賱賲 鬲賲賰賳 賱丿賷賰 兀賷 賲賳 賴匕賴 丕賱兀賯乇丕氐, 丕囟睾胤 丕賱睾丕亍.\n"
+"丕匕丕 賰丕賳鬲 亘毓囟 賴匕賴 丕賱兀賯乇丕氐 賲賮賯賵丿丞, 賯賲 亘丕夭丕賱丞 丕禺鬲賷丕乇賴丕孬賲 丕囟睾胤 賲賵丕賮賯."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "賲丿賷乇 丕賱兀賲賳:"
+msgid "Wait please"
+msgstr "丕賱丕賳鬲馗丕乇 賲賳 賮囟賱賰"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "鬲賳亘賷賴丕鬲 兀賲賳賷丞:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "賲爻鬲賵賶 丕賱兀賲賳:"
+msgid "Backup user files"
+msgstr "丕賳爻禺 賲賱賮丕鬲 丕賱賲爻鬲禺丿賲"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(丕賱賯賷賲丞 丕賱廿賮鬲乇丕囟賷丞: %s)"
+msgid "New"
+msgstr "噩丿賷丿"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"賯賷丕爻賷: 賴匕丕 賴賵 丕賱賲爻鬲賵賶 丕賱賯賷丕爻賷 丕賱賲賳氐賵丨 亘賴 賱賰賲亘賷賵鬲乇 賷賯賵賲 亘丕賱廿鬲氐丕賱\n"
-" 亘丕賱廿賳鬲乇賳鬲 賰毓賲賷賱.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"賲乇鬲賮毓: 鬲賵噩丿 亘毓囟 丕賱賯賷賵丿 賲爻亘賯丕賸, 賵 亘毓囟 丕賱廿禺鬲亘丕乇丕鬲 賷鬲賲 鬲卮睾賷賱賴丕 丌賱賷丕賸 毓賳丿 賰賱 "
-"賱賷賱丞.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"賲乇鬲賯毓 兀賰孬乇: 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 毓丕賱賺 亘卮賰賱 賰丕賮賺 賱丕爻鬲禺丿丕賲 丕賱賳馗丕賲 賰禺丕丿賲 賷爻鬲胤賷毓 兀賳 "
-"賷賯亘賱\n"
-" 丕賱廿鬲氐丕賱丕鬲 賲賳 毓賲賱丕亍 賰孬賷乇賷賳. 丕匕丕 賰丕賳 丨丕爻亘賰 賲噩乇丿 毓賲賷賱 毓賱賶 "
-"丕賱廿賳鬲乇賳鬲\n"
-"\t 賮賷噩亘 毓賱賷賰 丕禺鬲賷丕乇 賲爻鬲賵賶 兀賯賱.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"賲乇鬲賯毓 噩丿丕賸: 賴匕丕 賷賲丕孬賱 丕賱賲爻鬲賵賶 丕賱爻丕亘賯, 賱賰賳 丕賱賳馗丕賲 賮賷 賴匕賴 丕賱丨丕賱 賷賰賵賳 賲睾賱賯丕賸 賵 "
-"丕賱賲夭丕賷丕\n"
-" 丕賱兀賲賳賷丞 鬲賰賵賳 毓賱賶 兀賯氐賶 丨丿\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"賲丿賷乇 丕賱兀賲賳:\n"
-" 丕匕丕 賰丕賳 禺賷丕乇 '丕賱鬲賳亘賷賴丕鬲 丕賱兀賲賳賷丞' 賲禺鬲丕乇丕賸, 賮爻賷鬲賲 丕乇爻丕賱 鬲賳亘賷賴丕鬲 "
-"兀賲賳賷丞 丕賱賶 丕賱賲爻鬲禺丿賲 (亘廿爻賲 丕賱賲爻鬲禺丿賲\n"
-"\t 兀賵 丕賱亘乇賷丿 丕賱兀賱賰鬲乇賵賳賷)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"賴匕賴 賴賷 兀賴賲 禺胤賵丞 鬲鬲禺匕賴丕 ?賲賳 賳馗丕賲 賱賷賳賰爻 丕賱禺丕氐\n"
+"亘賰: 毓賱賷賰 丕丿禺丕賱 賰賱賲丞 賲乇賵乇 丕賱賲爻鬲禺丿賲 \"丕賱噩匕乇\" (root) 賵 賴賵\n"
+"賲丿賷乇 丕賱賳馗丕賲 賵 丕賱賲爻鬲禺丿賲 丕賱賵丨賷丿 丕賱賲禺賵賱 亘鬲丨丿賷孬 丕賱賳馗丕賲, 丕囟丕賮丞 丕賱賲爻鬲禺丿賲賷賳,\n"
+"鬲睾賷賷乇 鬲賴賷卅丞 丕賱賳馗丕賲, 丕賱禺. 亘丕禺鬲氐丕乇 賷賲賰賳 賱賱賲爻鬲禺丿賲 \"丕賱噩匕乇\" 兀賳 賷賮毓賱\n"
+"賰賱 卮卅! 賱匕丕 毓賱賷賰 丕禺鬲賷丕乇 賰賱賲丞 丕賱賲乇賵乇 氐毓亘丞\n"
+"丕賱鬲禺賲賷賳 - 爻賷禺亘乇賰 DrakX 丕匕丕 賰丕賳鬲 賰賱賲丞 丕賱賲乇賵乇 丕賱鬲賷 鬲爻鬲禺丿賲賴丕 爻賴賱丞. 賰賲丕\n"
+"鬲乇賶, 賱爻鬲 賲噩亘乇丕賸 毓賱賶 丕丿禺丕賱 賰賱賲丞 賲乇賵乇, 賱賰賳賳丕 賳賳氐丨 亘卮丿丞 ?賳 丕丨鬲賲丕賱 丨丿賵孬\n"
+"兀禺胤丕亍 賲毓 賱賷賳賰爻 毓丕丿賷 賲孬賱 亘丕賯賷 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶. 賵 亘賲丕 兀賳 \"丕賱噩匕乇\" 賷賲賰賳賴\n"
+"鬲毓丿賷 賰賱 丕賱丨丿賵丿 賵 賯丿 賷丨匕賮 賰賱 丕賱亘賷丕賳丕鬲 賲賳 丿賵賳 賯氐丿, 賱匕丕 賮賷噩亘 兀賳 賷賰賵賳 賲賳\n"
+"丕賱氐毓亘 兀賳 鬲氐亘丨 丕賱賲爻鬲禺丿賲 \"丕賱噩匕乇\".\n"
"\n"
+"賷噩亘 兀賳 鬲賰賵賳 賰賱賲丞 丕賱賲乇賵乇 禺賱賷胤丕賸 賲賳 丕賱丨乇賵賮 賵 丕?乇賯丕賲 賰賲丕 賷噩亘 兀賳 鬲丨鬲賵賷\n"
+"毓賱賶 8 丨乇賵賮 毓賱賶 丕?賯賱. ? 鬲賰鬲亘 賰賱賲丞 賲乇賵乇 \"丕賱噩匕乇\" 毓賱賶 賵乇賯 -- 賴匕丕 賷爻賴賾賱\n"
+"丕禺鬲乇丕賯 丕賱賳馗丕賲 丕匕丕 乇兀賶 兀丨丿 賰賱賲丞 丕賱賲乇賵乇.\n"
"\n"
+"賳氐賷丨丞 兀禺乇賶 -- ? 鬲噩毓賱 賰賱賲丞 丕賱賲乇賵乇 胤賵賷賱丞 噩丿丕賸 兀賵 賲毓賯賾丿丞 ?賳賰 賷噩亘 兀賳 鬲賰賵賳\n"
+"賯丕丿乇丕賸 毓賱賶 鬲匕賰乇賴丕!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"賱賳 賷鬲賲 毓乇囟 賰賱賲丞 丕賱賲乇賵乇 毓賱賶 丕賱卮丕卮丞. 賱鬲賯賱賷賱 賮乇氐丞 丨丿賵孬\n"
+"禺胤兀 兀孬賳丕亍 丕賱賰鬲丕亘丞, 爻鬲丨鬲丕噩 丕賱賶 丕丿禺丕賱 賰賱賲丞 丕賱賲乇賵乇 賲乇鬲賷賳.\n"
+"丕匕丕 兀禺胤兀鬲 賮賷 丕賱賰鬲丕亘丞 賮賷 丕賱賲乇鬲賷賳, 賮爻賷噩亘 丕爻鬲禺丿丕賲 賰賱賲丞\n"
+"丕賱賲乇賵乇 \"丕賱禺丕胤卅丞\" 賮賷 丕賱賲乇丞 丕?賵賱賶 丕賱鬲賷 鬲丿禺賱 賮賷賴丕 丕賱賶 丕賱賳馗丕賲.\n"
"\n"
+"丕匕丕 賰賳鬲 鬲乇賷丿 丕賱賵氐賵賱 丕賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇 賱賰賷 賷鬲賲 丕賱鬲丨賰賲 亘賰 毓賳 胤乇賷賯\n"
+"禺丕丿賲 賲氐丕丿賯丞, 丕囟睾胤 夭乇 \"%s\".\n"
"\n"
+"丕匕丕 賰丕賳鬲 卮亘賰鬲賰 鬲爻鬲禺丿賲 LDAP, NIS, 兀賵 PDC Windows Domain Authentication "
+"Services\n"
+"毓賱賷賰 丕禺鬲賷丕乇 丕賱禺賷丕乇 丕賱賲賳丕爻亘 賰賭\"賲氐丕丿賯丞\". 丕匕丕 賱賲 鬲毓賱賲 兀賷 賲賳賴丕 鬲乇賷丿\n"
+"丕爻鬲禺丿丕賲賴, 丕爻兀賱 賲丿賷乇 丕賱卮亘賰丞 賱丿賷賰.\n"
"\n"
-"賲賱丨賵馗丞: 丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 氐賵鬲 ISA PnP, 爻鬲丨鬲丕噩 丕賱賶 丕爻鬲禺丿丕賲 亘乇賳丕賲噩 "
-"sndconfig. 賮賯胤 毓賱賷賰 賰鬲丕亘丞 \"sndconfig\" 賮賷 爻胤乇 丕賱兀賵丕賲乇."
+"丕匕丕 賰丕賳鬲 賱丿賷賰 賲卮賰賱丞 賮賷 鬲匕賰乇 賰賱賲丕鬲 丕賱賲乇賵乇, 賷賲賰賳賰 丕禺鬲賷丕乇\n"
+"\"? 賰賱賲丞 賲乇賵乇\" 丕匕丕 賱賲 賷賰賳 丕賱賰賲亘賷賵鬲乇 丕賱禺丕氐 亘賰 賲鬲氐賱丕賸 亘丕?賳鬲乇賳鬲,\n"
+"兀賵 兀賳賰 鬲孬賯 賮賷 丕賱賱匕賷賳 賷丿禺賱賵賳 丕賱賶 丕賱賳馗丕賲."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"鬲毓匕乇 丕賷噩丕丿 亘胤丕賯丞 氐賵鬲 毓賱賶 噩賴丕夭賰. 賮囟賱丕賸 鬲兀賰丿 賲賳 兀賳 亘胤丕賯丞 丕賱氐賵鬲 丕賱賲丿毓賵賲丞 賲賳 "
-"賱賷賳賰爻 賲賵氐賵賱丞 亘卮賰賱 氐丨賷丨.\n"
-"\n"
-"\n"
-"賷賲賰賳賰 夭賷丕乇丞 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱毓鬲丕丿 丕賱賲丿毓賵賲 丕賱禺丕氐丞 亘賳丕 毓賱賶:\n"
-"\n"
+"毓賳丿 賴匕賴 丕賱賳賯胤丞, 爻賷爻賲丨 賱賰 DrakX 亘丕禺鬲賷丕乇 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 丕賱匕賷 鬲乇睾亘 亘賴\n"
+"賱賴匕賴 丕賱賲丕賰賷賳丞. 亘丿賷賴賷丕賸, 賷噩亘 鬲毓賷賷賳 賲爻鬲賵賶 兀賲賳賷\n"
+"毓丕賱賺 丕匕丕 賰丕賳鬲 丕賱賲丕賰賷賳丞 鬲丨鬲賵賷 毓賱賶 賲毓賱賵賲丕鬲 賴丕賲丞, 兀賵 丕匕丕 賰丕賳鬲 丕賱賲丕賰賷賳丞\n"
+"爻鬲購爻鬲禺丿賲 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲. 丕賳 丕爻鬲禺丿丕賲 賲爻鬲賵賶 兀賲賳賷 毓丕賱賺 賷兀鬲賷\n"
+"毓丕丿丞 毓賱賶 丨爻丕亘 爻賴賵賱丞 丕賱廿爻鬲禺丿丕賲.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕賱廿禺鬲賷丕乇, 丕丨賮馗 丕賱丕禺鬲賷丕乇 丕賱廿賮鬲乇丕囟賷."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "賱賲 賷鬲賲 丕禺鬲賷丕乇 亘胤丕賯丞 氐賵鬲"
+msgid "Load from floppy"
+msgstr "丨賲賾賱 賲賳 賯乇氐 賲乇賳"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) 賲毓丕賷賳丞"
+msgid "The following printer was auto-detected. "
+msgstr "鬲賲 丕賰鬲卮丕賮 丕賱胤丕亘毓丞 丕賱丌鬲賷丞 丌賱賷丕賸. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "噩丕乇賷 鬲賵賱賷丿 丕賱賲毓丕賷賳丞 ..."
+msgid "Boot Floppy"
+msgstr "賯乇氐 丕賱廿賯賱丕毓"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "賷噩亘 丕禺鬲賷丕乇 賲賱賮 氐賵乇丞 兀賵賱丕賸!"
+msgid "Norwegian"
+msgstr "丕賱賳乇賵賷噩賷丞"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "廿禺鬲賷丕乇 賱賵賳 卮乇賷胤 丕賱鬲丨賲賷賱"
+msgid "Searching for new scanners ..."
+msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 賲丕爻丨丕鬲 囟賵卅賷丞 噩丿賷丿丞..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "賴匕賴 丕賱爻賲丞 賱賷爻 賱賴丕 bootsplash 賮賷 %s !"
+msgid "Apache World Wide Web Server"
+msgstr "禺丕丿賲 丕賱賵賷亘 Apache"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "噩丕乇賷 丨賮馗 爻賲丞 Bootsplash..."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Stepping of the cpu (sub model (generation) number)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image file"
-msgstr "廿禺鬲乇 賲賱賮 氐賵乇丞"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "廿禺鬲乇 賲賱賮 氐賵乇丞"
+msgid "select path to restore (instead of /)"
+msgstr "丕禺鬲乇 賲爻丕乇 丕賱廿爻鬲毓丕丿丞 (亘丿賱丕賸 賲賳 / )"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "鬲賴賷卅丞 氐賵乇丞 丕賱廿賯賱丕毓"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "丕噩毓賱 乇爻丕卅賱 丕賱賳賵丕丞 氐丕賲鬲丞 丕賮鬲乇丕囟賷丕賸"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "丕毓乇囟 丕賱卮毓丕乇 賮賷 爻胤乇 丕賱兀賵丕賲乇"
+msgid "China"
+msgstr "丕賱氐賷賳"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "廿禺鬲乇 丕賱賱賵賳"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (鬲兀賰丿 賲賳 兀賳 賰賱 丕賱胤丕亘毓丕鬲 賲賵氐賵賱丞 賵 鬲毓賲賱).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "丕丨賮馗 丕賱爻賲丞"
+msgid "Georgia"
+msgstr "噩賵乇噩賷丕"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "賲毓丕賷賳丞"
+msgid "Reading data of installed printers..."
+msgstr "噩丕乇賷 賯乇丕亍丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲 丕賱賲孬亘鬲丞..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "賱賵賳 卮乇賷胤 丕賱鬲賯丿賲"
+msgid " Erase Now "
+msgstr " 丕賲丨賽 丕賱丌賳 "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "丕乇鬲賮丕毓 卮乇賷胤 丕賱鬲賯丿賲"
+msgid "server"
+msgstr "禺丕丿賲"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "毓乇囟 卮乇賷胤 丕賱鬲賯丿賲"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "兀丿禺賱 賯乇氐 賲乇賳 賲噩賴夭 毓賱賶 賳馗丕賲 賲賱賮丕鬲 FAT 賮賷 丕賱爻賵丕賯丞 %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"丕賱廿丨丿丕孬賷 丕賱氐丕丿賷 賱賱乇賰賳 丕賱兀賷爻乇 丕賱兀毓賱賶\n"
-"賱卮乇賷胤 丕賱鬲賯丿賲"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "賳毓賲 鬲毓賳賷 兀賳 丕賱賲毓丕賱噩 賱丿賷賴 賲毓丕賱噩 賲爻丕毓丿 賱賱毓賲賱賷丕鬲 丕賱丨爻丕亘賷丞"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"丕賱廿丨丿丕孬賷 丕賱爻賷賳賷 賱賱乇賰賳 丕賱兀賷爻乇 丕賱兀毓賱賶\n"
-"賱卮乇賷胤 丕賱鬲賯丿賲"
+msgid "Please Wait... Applying the configuration"
+msgstr "賷乇噩賶 丕賱廿賳鬲馗丕乇... 噩丕乇賷 鬲胤亘賷賯 丕賱廿毓丿丕丿丕鬲"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "丕乇鬲賮丕毓 丕賱氐賳丿賵賯 丕賱賳氐賷"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "毓乇囟 丕賱賳氐"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"丕賱廿丨丿丕孬賷 丕賱氐丕丿賷 賱賱氐賳丿賵賯 丕賱賳氐賷\n"
-"亘毓丿丿 丕賱丨乇賵賮"
+msgid "SCSI controllers"
+msgstr "賲鬲丨賰賲丕鬲 SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"丕賱廿丨丿丕孬賷 丕賱爻賷賳賷 賱賱氐賳丿賵賯 丕賱賳氐賷\n"
-"亘毓丿丿 丕賱丨乇賵賮"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "毓賱賶 禺丕丿賲 LPD \"%s\", 丕賱胤丕亘毓丞 \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "丕爻鬲毓乇囟"
+msgid "Choosing a display manager"
+msgstr "噩丕乇賷 丕禺鬲賷丕乇 賲丿賷乇 丕賱毓乇囟"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "丕爻賲 丕賱爻賲丞"
+msgid "Zeroconf Host name"
+msgstr "丕爻賲 賲爻鬲囟賷賮 Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "丿賯丞 丕賱毓乇囟 丕賱賳賴丕卅賷丞"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "毓賳賵丕賳 IP 賷噩亘 兀賳 賷賰賵賳 毓賱賶 丕賱賳爻賯 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "丕賳卮丕亍 丕賱禺胤賵丞 丕賱兀賵賱賶"
+msgid "Ecuador"
+msgstr "丕賱廿賰賵丕丿賵乇"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"丨夭賲丞 'ImageMagick' 囟乇賵乇賷丞 賱賰賷 賷鬲賲 丕賰賲丕賱 丕賱鬲賴賷卅丞.\n"
-"丕囟睾胤 \"賲賵丕賮賯\" 賱鬲孬亘賷鬲 'ImageMagick' 兀賵 \"丕賱睾丕亍\" 賱賱禺乇賵噩"
+msgid "Add an item"
+msgstr "兀囟賮 賲丕丿丞"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丞 鬲賱賮丕夭 毓賱賶 噩賴丕夭賰. 賮囟賱丕賸 鬲兀賰丿 賲賳 兀賳 亘胤丕賯丞 丕賱賮賷丿賷賵/丕賱鬲賱賮丕夭 "
-"丕賱賲丿毓賵賲丞 賮賷 賱賷賳賰爻 賲賵氐賵賱丞 亘卮賰賱 氐丨賷丨.\n"
-"\n"
-"\n"
-"賷賲賰賳賰 夭賷丕乇丞 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱毓鬲丕丿 丕賱賲丿毓賵賲 丕賱禺丕氐丞 亘賳丕 毓賱賶:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "丕賱胤丕亘毓丕鬲 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞 賲鬲賵賮乇丞 賱賱兀噩賴夭丞 丕賱兀禺乇賶"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丞 鬲賱賮丕夭!"
+msgid "I can't find needed image file `%s'."
+msgstr "賱丕 賷賲賰賳賳賷 丕賷噩丕丿 賲賱賮 丕賱氐賵乇丞 `%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "丕賱丌賳 賷賲賰賳賰 鬲卮睾賷賱 XawTV (賮賷 丕賱賵丕噩賴丞 丕賱乇爻賵賲賷丞!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "賱賲 賷鬲賲 丕賷噩丕丿 亘胤丕賯丞 丕賱氐賵鬲. 丨丕賵賱 鬲卮睾賷賱 \"harddrake\" 亘毓丿 丕賱鬲孬亘賷鬲"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "賳鬲賲賳賶 賱賰 賷賵賲丕賸 爻毓賷丿丕賸!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"鬲賲 丕毓胤丕亍 賲賳賮匕 睾賷乇 氐丕賱丨: %s.\n"
+"丕賱賳爻賯 丕賱氐丨賷丨 賴賵 \"port/tcp\" 兀賵 \"port/udp\", \n"
+"賮賷 丨賷賳 賷賰賵賳 丕賱賲賳賮匕 (port) 亘賷賳 1 賵 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV 睾賷乇 賲孬亘鬲!"
+msgid "Shell"
+msgstr "丕賱睾賱丕賮"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "賰丕賳 賴賳丕賰 禺胤兀 兀孬賳丕亍 囟亘胤 賯賳賵丕鬲 丕賱鬲賱賮丕夭"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "噩丕乇賷 囟亘胤 賯賳賵丕鬲 丕賱鬲賱賮丕夭"
+msgid "Sao Tome and Principe"
+msgstr "爻丕賵 鬲賵賲賷 賵 丕賱亘乇賷賳爻賷亘"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "囟賷胤 賯賳賵丕鬲 丕賱鬲賱賮丕夭 賮賷 鬲賯丿賲 ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "鬲毓匕乇 丕賱丿禺賵賱 亘丕爻鬲禺丿丕賲 丕爻賲 丕賱賲爻鬲禺丿賲 %s (賰賱賲丞 賲乇賵乇 爻賷卅丞責)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "丕賱賲賳胤賯丞 :"
+msgid "Azerbaidjani (latin)"
+msgstr "丕賱兀匕乇亘賷噩丕賳賷丞 (賱丕鬲賷賳賷)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "TV norm :"
+msgid "Package not installed"
+msgstr "賱賲 賷鬲賲 鬲孬亘賷鬲 丕賱丨夭賲丞"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"賮囟賱丕賸,\n"
-"丕胤亘毓 tv norm 丕賱禺丕氐 亘賰 賵 亘賱丿賰"
+msgid "Become a MandrakeExpert"
+msgstr "賰賳 禺亘賷乇丕賸 賮賷 MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australian Optus cable TV"
+msgid "American Samoa"
+msgstr "爻丕賲賵丕 丕賱兀賲乇賷賰賷丞"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "賳賷賵夭賷賱賳丿丕 "
+msgid "Protocol"
+msgstr "丕賱亘乇賵鬲賵賰賵賱"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "賮乇賳爻丕 [爻賷賰丕賲]"
+msgid "Copy fonts on your system"
+msgstr "丕賳爻禺 丕賱禺胤賵胤 丕賱賶 賳馗丕賲賰"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "兀賵乇賵亘賾丕 丕賱卮賾乇賯賷賾丞"
+msgid "Harddrake help"
+msgstr "賲爻丕毓丿丞 Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "兀賵乇賵亘賾丕 丕賱睾乇亘賷賾丞"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "丕賱氐賷賳 (broadcast)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "鬲賴賷卅丞 禺丕丿賲 胤乇賮賷丕鬲 Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "丕賱賷丕亘丕賳 (cable)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" 鬲賮丕氐賷賱 鬲賯乇賷乇 DrakBackup\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "丕賱賷丕亘丕賳 (broadcast)"
+msgid "Restore all backups"
+msgstr "丕爻鬲毓丿 賰賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "賰賳丿丞 (cable)"
+msgid "if set to yes, check open ports."
+msgstr "if set to yes, check open ports."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲賾丨丿丞 丕賱兀賲乇賷賰賷賾丞 (cable-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "賯丿 賷爻鬲睾乇賯 賲爻丨 丕賱賵爻賷胤 亘毓囟 丕賱賵賯鬲."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲賾丨丿丞 丕賱兀賲乇賷賰賷賾丞 (cable)"
+msgid "You can't select/unselect this package"
+msgstr "賱丕 賷賲賰賳賰 丕禺鬲賷丕乇/丕夭丕賱丞 丕禺鬲賷丕乇 賴匕賴 丕賱丨夭賲丞"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "丕賱賵賱丕賷丕鬲 丕賱賲鬲賾丨丿丞 丕賱兀賲乇賷賰賷賾丞 (broadcast)"
+msgid "Warning"
+msgstr "鬲丨匕賷乇"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV 睾賷乇 賲孬亘賾鬲!\n"
-"\n"
-"\n"
-"丕匕丕 賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 鬲賱賮丕夭 賱賰賳 賱賲 賷爻鬲胤毓 DrakX 丕賰鬲卮丕賮賴丕 (賱丕 鬲賵噩丿 賵丨丿丕鬲 bttv "
-"賵賱丕 saa7134\n"
-"賮賷 \"/etc/modules\") 兀賵 賱賲 鬲孬亘賾鬲 xawtv, 賮囟賱丕賸 賯賲 亘廿乇爻丕賱 賳鬲丕卅噩\n"
-"丕賱兀賲乇 \"lspcidrake -v -f\" 丕賱賶 \"install\\@mandrakesoft.com\"\n"
-"賲毓 丕賱毓賳賵丕賳 \"undetected TV card\".\n"
-"\n"
"\n"
-"賷賲賰賳賰 鬲孬亘賷鬲 XawTV 亘賰鬲丕亘丞 丕賱兀賲乇 \"urpmi xawtv\" 賰賲爻鬲禺丿賲 噩匕乇 賮賷 爻胤乇 丕賱兀賵丕賲乇."
+"-丕賱賲賱賮賾丕鬲 丕賱兀禺乇賶:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "兀爻丕爻賷"
+msgid "Remote host name"
+msgstr "丕爻賲 丕賱賲爻鬲囟賷賮 丕賱亘毓賷丿"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "孬丕賳賵賷"
+msgid "deactivate now"
+msgstr "賯賲 亘廿夭丕賱丞 丕賱鬲賳卮賷胤 丕賱丌賳"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "丕賳賯乇 毓賱賶 噩賴丕夭 賮賷 丕賱爻賱爻賱丞 丕賱賷爻乇賶 賱毓乇囟 賲毓賱賵賲丕鬲賴 賴賳丕."
+msgid "access to X programs"
+msgstr "丕賱賵氐賵賱 丕賱賶 亘乇丕賲噩 X"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "睾賷乇 賲毓乇賵賮"
+msgid "Computing the size of the Windows partition"
+msgstr "噩丕乇賷 丨爻丕亘 賲爻丕丨丞 鬲噩夭卅丞 Windows"
-# ../../standalone/harddrake2:1, c-format
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "睾賷乇 賲毓乇賵賮"
+msgid "Italy"
+msgstr "廿賷胤丕賱賷丕"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "噩丕乇賷 鬲卮睾賷賱 \"%s\" ..."
+msgid "Name of printer"
+msgstr "丕爻賲 丕賱胤丕亘毓丞"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "卮睾賾賱 兀丿丕丞 丕賱鬲賴賷卅丞"
+msgid "disable"
+msgstr "鬲毓胤賷賱"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "鬲賴賷卅丞 丕賱賵丨丿丞"
+msgid "error unmounting %s: %s"
+msgstr "禺胤兀 賮賷 丕夭丕賱丞 鬲丨賲賷賱 %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "賲毓賱賵賲丕鬲"
+msgid "Do it!"
+msgstr "丕賮毓賱賴丕!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "丕賱毓鬲丕丿 丕賱賲購賰鬲卮賮"
+msgid "Cayman Islands"
+msgstr "噩夭乇 賰丕賷賲丕賳"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 丕賱廿氐丿丕乇 "
+msgid "%s not responding"
+msgstr "%s 賱丕 賷爻鬲噩賷亘"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "噩丕乇賷 丕賱鬲丨賯賯"
+msgid "Select model manually"
+msgstr "鬲賲 丕禺鬲賷丕乇 丕賱賳賾賲賵匕噩 賷丿賵賷賾賸丕"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "丕賱賲丐賱賮:"
+msgid "Format"
+msgstr "鬲賳爻賷賯"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"賴匕丕 賴賵 HardDrake, 兀丿丕丞 Mandrake 賱鬲賴賷卅丞 丕賱毓鬲丕丿.\n"
-"丕賱廿氐丿丕乇:"
+"丕賱胤乇賷賯丞 丕賱兀賰孬乇 卮賷賵毓丕賸 賱賱廿鬲氐丕賱 亘賭 adsl 賴賷 pppoe.\n"
+"亘毓囟 丕賱廿鬲氐丕賱丕鬲 鬲爻鬲禺丿賲 pptp, 賵 丕賱賯賱賷賱 鬲爻鬲禺丿賲 dhcp.\n"
+"丕匕丕 賱賲 鬲賰賳 鬲毓賱賲, 丕禺鬲乇 '丕爻鬲禺丿賲 pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "丨賵賱 HardDrake"
+msgid "Various"
+msgstr "賲鬲賳賵毓丞"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_丨賵賱..."
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_鬲賯乇賷乇 禺胤兀"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"賱賲 賷鬲賲賰賳 Printerdrake 賲賳 丕賱鬲毓乇賮 毓賱賶 胤乇丕夭 胤丕亘毓鬲賰 %s. 賮囟賱丕賸 丕禺鬲乇 丕賱胤乇丕夭 丕賱氐丨賷丨 "
+"賲賳 丕賱賯丕卅賲丞."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"毓賳丿 丕禺鬲賷丕乇賰 賱噩賴丕夭, 爻鬲爻鬲胤賷毓 乇丐賷丞 賲毓賱賵賲丕鬲 鬲丕噩賴丕夭 賮賷 丕賱丨賯賵賱 丕賱賲毓乇賵囟丞 賮賷 丕賱廿胤丕乇 "
-"丕賱兀賷賲賳 (\"賲毓賱賵賲丕鬲\")"
+"\n"
+"毓賱賾賲 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱鬲賷 鬲乇賷丿 賳賯賱賴丕 孬賲 丕賳賯乇 \n"
+"\"丕賳賯賱\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "丕禺鬲乇 噩賴丕夭丕賸!"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "丕賱兀賱亘丕賳賷丞賾"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "賱賷鬲賵丕賳賷丕"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "賲丿賲噩"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Detected model: %s %s"
+msgstr "鬲賲 丕賰鬲卮丕賮 丕賱胤乇丕夭: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
msgstr ""
-"賵氐賮 丕賱丨賯賵賱:\n"
-"\n"
+"賴匕丕 賴賵 HardDrake, 兀丿丕丞 Mandrake 賱鬲賴賷卅丞 丕賱毓鬲丕丿.\n"
+"丕賱廿氐丿丕乇:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "賲爻丕毓丿丞 Harddrake"
+msgid "Local files"
+msgstr "賲賱賮丕鬲 賲丨賱賷丞"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_賵氐賮 丕賱丨賯賵賱"
+msgid "maybe"
+msgstr "乇亘賲丕"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_賲爻丕毓丿丞"
+msgid "Panama"
+msgstr "亘賳賲丕"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_禺乇賵噩"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"亘胤丕賯丞 丕賱乇爻賵賲 丕賱禺丕氐丞 亘賰 賷亘丿賵 兀賳賴丕 鬲丨鬲賵賷 毓賱賶 賲賵氐賱 賱賱鬲賱賮丕夭.\n"
+"賷賲賰賳 鬲賴賷卅丞 丕賱亘胤丕賯丞 賱賱毓賲賱 亘丕爻鬲禺丿丕賲 丕賱賭 frame-buffer.\n"
+"\n"
+"賱賴匕丕 丕賱睾乇囟 賷噩亘 毓賱賷賰 鬲賵氐賷賱 亘胤丕賯丞 丕賱乇爻賵賲 亘丕賱鬲賱賮丕夭 賯亘賱 亘丿亍 鬲卮睾賷賱 丕賱賰賲亘賷賵鬲乇.\n"
+"孬賲 丕禺鬲乇 \"TVout\" 賲賳 賲丨賲賾賱 丕賱廿賯賱丕毓\n"
+"\n"
+"賴賱 賱丿賷賰 賴匕賴 丕賱賲賷夭丞責"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/鬲丨賯賯 丌賱賷 賲賳 _爻賵丕賯丕鬲 Jazz"
+msgid "Monitor"
+msgstr "丕賱卮丕卮丞"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/鬲丨賯賯 丌賱賷 賲賳 兀_噩賴夭丞 丕賱賲賵丿賲"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"兀賳鬲 毓賱賶 賵卮賰 鬲賴賷卅丞 丕賱胤亘丕毓丞 毓賱賶 丨爻丕亘 賮賷 Windows 賲毓 賰賱賲丞 賲乇賵乇. 亘爻亘亘 禺胤兀 賮賷 "
+"賴賷賰賱賷丞 毓賲賷賱 Samba, 賷鬲賲 賵囟毓 賰賱賲丞 丕賱賲乇賵乇 亘賳氐 賵丕囟丨 賮賷 爻胤乇 兀賵丕賲乇 毓賲賷賱 Samba "
+"丕賱賲爻鬲禺丿賲 賱賳賯賱 賵馗賷賮丞 丕賱胤亘丕毓丞 丕賱賶 禺丕丿賲 Windows. 賱匕丕 賮廿賳賴 賷賲賰賳 賱賰賱 賲爻鬲禺丿賲 毓賱賶 "
+"賴匕賴 丕賱賲丕賰賷賳丞 兀賳 賷毓乇囟 賰賱賲丞 丕賱賲乇賵乇 毓賱賶 丕賱卮丕卮丞 亘丕爻鬲禺丿丕賲 賰賱賲丕鬲 賲乇賵乇 賲孬賱 \"ps "
+"auxwww\".\n"
+"\n"
+"賳丨賳 賳賳氐丨 亘丕爻鬲毓賲丕賱 賵丕丨丿 賲賳 丕賱亘丿丕卅賱 丕賱鬲丕賱賷丞 (賮賷 賰賱 丕賱丨丕?鬲 毓賱賷賰 丕賱鬲兀賰丿 兀賳 "
+"丕賱賲丕賰賷賳丕鬲 丕賱賲賵噩賵丿丞 賮賯胤 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞 鬲爻鬲胤賷毓 丕賱賵氐賵賱 丕賱賶 禺丕丿賲 Windows, 毓賳 "
+"胤乇賷賯 丕爻鬲禺丿丕賲 噩丿丕乇 賳丕乇賷 賲孬賱丕賸):\n"
+"\n"
+"丕爻鬲禺丿賲 丨爻丕亘 丿賵賳 賰賱賲丞 賲乇賵乇 毓賱賶 禺丕丿賲 Windows, 賲孬賱 丨爻丕亘 \"GUEST\" 兀賵 丨爻丕亘 禺丕氐 "
+"賱丕爻鬲禺丿丕賲賴 賱賱胤亘丕毓丞. ? 鬲賯賲 亘廿夭丕賱丞 丕賱丨賲丕賷丞 毓賳 胤乇賷賯 賰賱賲丕鬲 丕賱賲乇賵乇 賲賳 丨爻丕亘賰 丕賱卮禺氐賷 "
+"兀賵 賲賳 丨爻丕亘 賲丿賷乇 丕賱賳馗丕賲.\n"
+"\n"
+"賯賲 亘廿毓丿丕丿 禺丕丿賲 Windows 賱噩毓賱 丕賱胤丕亘毓丞 賲鬲賵賮乇丞 鬲丨鬲 亘乇賵鬲賵賰賵賱 LPD. 孬賲 賯賲 亘廿毓丿丕丿 "
+"丕賱胤亘丕毓丞 賲賳 賴匕賴 丕賱賲丕賰賷賳丞 賲毓 賳賵毓 丕賱賵氐賱丞 \"%s\" 賮賷 PrinterDrake.\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/鬲丨賯賯 丌賱賷 賲賳 丕賱_胤丕亘毓丕鬲"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 兀賱賮 賱賵賳 (16 亘鬲)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_禺賷丕乇丕鬲"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- 丕丨賮馗 毓賱賶 丕賱賯乇氐 丕賱氐賱亘 毓賱賶 丕賱賲爻丕乇:%s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "丕爻賲 賲氐賳賾毓 丕賱賲毓丕賱噩"
+msgid "Size: %d KB\n"
+msgstr "丕賱丨噩賲: %d 賰賷賱賵亘丕賷鬲\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "丕爻賲 賲氐賳賾毓 丕賱噩賴丕夭"
+msgid "Remove fonts on your system"
+msgstr "丕丨匕賮 丕賱禺胤賵胤 賲賳 丕賱賳馗丕賲"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "賳賵毓 丕賱賭bus 丕賱賲乇鬲亘胤丞 亘賴 丕賱賮兀乇丞"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"鬲丨匕賷乇, 賲賵丕卅賲 丕賱卮亘賰丞 (%s) 賲毓丿賾 賲爻亘賯丕賸.\n"
+"\n"
+"賴賱 鬲乇賷丿 丕毓丕丿丞 丕賱鬲賴賷卅丞 丌賱賷丕賸?\n"
+"\n"
+"賷賲賰賳賰 丕賱賯賷丕賲 亘匕賱賰 賷丿賵賷丕賸 賱賰賳 賷噩亘 兀賳 鬲賰賵賳 毓賱賶 毓賱賲 亘賲丕 鬲賮毓賱."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Stepping of the cpu (sub model (generation) number)"
+msgid "Graphical interface at startup"
+msgstr "賵丕噩賴丞 乇爻賵賲賷丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Model stepping"
+msgid "Please enter the directory to save:"
+msgstr "丕禺鬲乇 丕賱丿賱賷賱 丕賱匕賷 爻賷鬲賲 丨賮馗賴:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "賳爻賯 丕賱兀賯乇丕氐 丕賱鬲賷 鬲賯亘賱賴丕 丕賱爻賵丕賯丞"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "乇賯賲 丕賱賲毓丕賱噩"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "丕賱鬲噩夭卅丕鬲 賱賷爻鬲 賰丕賮賷丞 賱賲爻鬲賵賶 RAID %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "賴賵賷丞 丕賱賲毓丕賱噩"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"鬲賲鬲 鬲賴賷卅丞 丕賱胤丕亘毓丕鬲 丕賱丌鬲賷丞. 丕賳賯乇 賳賯乇丞 賲夭丿賵噩丞 毓賱賶 丕賱胤丕亘毓丞 賱鬲睾賷賷乇 丕毓丿丕丿丕鬲賴丕 "
+"賱噩毓賱賴丕 胤丕亘毓丞 丕賮鬲乇丕囟賷丞 兀賵 賱乇丐賷丞 賲毓賱賵賲丕鬲 丨賵賱賴丕."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "賲賳賮匕 胤丕亘毓丞 丕賱卮亘賰丞"
+msgid "Connected"
+msgstr "賲鬲賾氐賱"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "丕爻賲 丕賱賲毓丕賱噩"
+msgid "USB printer \\#%s"
+msgstr "胤丕亘毓丞 USB \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "丕賱丕爻賲"
+msgid "Macedonian"
+msgstr "丕賱賲賯丿賵賳賷丞"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "毓丿丿 兀夭乇丕乇 丕賱賮兀乇丞"
+msgid "Bridges and system controllers"
+msgstr "賲鬲丨賰賲丕鬲 丕賱賳馗丕賲"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "毓丿丿 丕賱兀夭乇丕乇"
+msgid "/File/_Save"
+msgstr "/賲賱賮/_丨賮馗"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "丕賱廿爻賲 丕賱乇爻賲賷 賱賲氐賳賾毓 丕賱賲毓丕賱噩"
+msgid "Mali"
+msgstr "賲丕賱賷"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "丕爻賲 丕賱胤乇丕夭"
+msgid "No details"
+msgstr "賱丕 鬲賮丕氐賷賱"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "噩賷賱 丕賱賲毓丕賱噩 (賲孬丕賱: 8 賱亘賳鬲賷賵賲 III, ...)"
+msgid "very nice"
+msgstr "馗乇賷賮 噩丿丕賸"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "丕賱胤乇丕夭"
+msgid "Preview"
+msgstr "賲毓丕賷賳丞"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "胤乇丕夭 丕賱賯乇氐 丕賱氐賱亘"
+msgid "Remote Control"
+msgstr "丕賱鬲丨賰賲 毓賳 亘毓丿"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "賮卅丞 噩賴丕夭 丕賱毓鬲丕丿"
+msgid "Please select media for backup..."
+msgstr "乇噩丕亍 丕禺鬲乇 賵爻賷胤 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "賮卅丞 丕賱賵爻賷胤"
+msgid "XFree86 server: %s\n"
+msgstr "禺丕丿賲 XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "丕賱噩賷賱 丕賱孬丕賳賵賷 賱賱賲毓丕賱噩"
+msgid "Allow Thin Clients"
+msgstr "丕爻賲丨 賱賱毓賲賱丕亍 丕賱賳丨丕賮 (Thin Clients)"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "丕賱賲爻鬲賵賶"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "丕賱噩賵乇噩賷丞 (丕賱鬲氐賲賷賲 丕賱乇賵爻賷)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "賳爻賯 丕賱兀賯乇丕氐 丕賱鬲賷 鬲賯亘賱賴丕 丕賱爻賵丕賯丞"
+msgid "/_Options"
+msgstr "/_禺賷丕乇丕鬲"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "賳爻賯 丕賱賯乇氐 丕賱氐賱亘"
+msgid "Your printer model"
+msgstr "胤乇丕夭 丕賱胤丕亘毓丞 丕賱禺丕氐丞 亘賰"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(鬲丨匕賷乇! 兀賳鬲 鬲爻鬲禺丿賲 XFS 賱賱鬲噩夭卅丞 丕賱噩匕乇賷丞,\n"
+"毓賲賱 賯乇氐 賲乇賳 賱賱廿賯賱丕毓 賯丿 賷賮卮賱 毓賱賶 丕賱兀乇噩丨,\n"
+"賱兀賳 XFS 賷丨鬲丕噩 丕賱賶 賲卮睾賱 賰亘賷乇 丕賱丨噩賲)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- 丕丨匕賮 賰賱 賲賱賮丕鬲 tar 丕賱禺丕氐丞 亘丕賱賯乇氐 丕賱氐賱亘 亘毓丿 賰賱 毓賲賱賷丞 賳爻禺.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr "賲毓丕賱噩丕鬲 pentium 丕賱賯丿賷賲丞 賰丕賳鬲 鬲鬲賵賯賮 毓賳 丕賱毓賲賱 毓賳丿 丕爻鬲禺丿丕賲 丕賱賰賵丿 F00F"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr "鬲毓匕乇 丕賷噩丕丿 氐賵乇丞 CD 兀賵 DVD, 賮囟賱丕賸 丕賳爻禺 亘乇賳丕賲噩 丕賱鬲孬亘賷賳 賵賲賱賮丕鬲 rpm"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "鬲賴賷卅丞 禺丕丿賲 胤乇賮賷丕鬲 Mandrake"
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f bug"
+msgid "Save"
+msgstr "丨賮馗"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "賳毓賲 鬲毓賳賷 兀賳 丕賱賲毓丕賱噩 丕賱賲爻丕毓丿 賱賱毓賲賱賷丕鬲 丕賱丨爻丕亘賷丞 賱丿賷賴 賲鬲噩賴 賱賱廿爻鬲孬賳丕亍丕鬲"
+msgid "The %s is unsupported"
+msgstr "賴匕丕 丕賱賭 %s 睾賷乇 賲丿毓賵賲"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "丕匕丕 賰丕賳 丕賱賭FPU 賱丿賷賴 賲鬲噩賴 IRQ"
+msgid "Load the drivers for your usb devices."
+msgstr "丨賲賾賱 賲卮睾賱丕鬲 兀噩賴夭丞 USB."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "賳毓賲 鬲毓賳賷 兀賳 丕賱賲毓丕賱噩 賱丿賷賴 賲毓丕賱噩 賲爻丕毓丿 賱賱毓賲賱賷丕鬲 丕賱丨爻丕亘賷丞"
+msgid "Disk"
+msgstr "丕賱賯乇氐"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "賴賱 FPU 賲賵噩賵丿"
+msgid "Enter a printer device URI"
+msgstr "兀丿禺賱 URI 丕賱禺丕氐 亘丕賱胤丕亘毓丞"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"賳噩丕丨 MandrakeSoft 賲亘賳賷 毓賱賶 賲亘丿兀 丨乇賷丞 丕賱亘乇丕賲丨. 賳馗丕賲 丕賱鬲卮睾賷賱 丕賱噩丿賷丿 丕賱禺丕氐 亘賰 "
+"賴賵 賳鬲賷噩丞 賱賱鬲毓丕賵賳 賵 丕賱毓賲賱 丕賱噩丕丿 賲賳 噩夭亍 賲賳 賲噩鬲賲毓 賱賷賳賰爻 丨賵賱 丕賱毓丕賱賲"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv bug"
+msgid "Israel"
+msgstr "丕爻乇丕卅賷賱"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flags reported by the kernel"
+msgid "French Guiana"
+msgstr "睾賵賷丕賳丕 丕賱賮乇賳爻賷丞"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flags"
+msgid "default:LTR"
+msgstr "default:RTL"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "賵丨丿丞 賳賵丕丞 賱賷賳賰爻 丕賱鬲賷 鬲鬲毓丕賲賱 賲毓 賴匕丕 丕賱噩賴丕夭"
+msgid "add a rule"
+msgstr "丕囟丕賮丞 賯丕毓丿丞"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "賵丨丿丞"
+msgid "A command line must be entered!"
+msgstr "賷噩亘 丕丿禺丕賱 爻胤乇 兀賵丕賲乇"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "丕爻 賲丕賱噩賴丕夭 丕賱丿賷賳丕賲賷賰賷 丕賱噩丿賷丿 丕賱匕賷 賷鬲賲 鬲賵賱賷丿賴 賲賳 devfs"
+msgid "Select user manually"
+msgstr "丕禺鬲乇丕賱賲爻鬲禺丿賲 賷丿賵賷賾賸丕"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "噩賴丕夭 devfs 噩丿賷丿"
+msgid "Transfer printer configuration"
+msgstr "賳賯賱 廿毓丿丕丿丕鬲 丕賱胤丕亘毓丞"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "丕爻賲 丕賱噩賴丕夭 丕賱賯丿賷賲 丕賱爻丕賰賳 丕賱賲爻鬲禺丿賲 賮賷 丨夭賲丞 dev"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "賴賱 鬲乇賷丿 鬲賲賰賷賳 丕賱胤亘丕毓丞 毓賱賶 丕賱胤丕亘毓丕鬲 丕賱賲匕賰賵乇丞 兀毓賱丕賴責\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "賲賱賮 丕賱噩賴丕夭 丕賱賯丿賷賲"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "賴匕丕 丕賱丨賯賱 賷氐賮 丕賱噩賴丕夭"
+msgid "%s (Port %s)"
+msgstr "%s (丕賱賲賳賮匕 %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "丕爻鬲禺丿賲 丕賱廿鬲氐丕賱 亘丕賱卮亘賰丞 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"鬲乇丿丿 丕賱賲毓丕賱噩 亘丕賱賲賷睾丕賴賷乇鬲夭 (丕賱賲賷睾丕賴賷乇鬲夭 鬲卮賷乇 丕賱賶 丕賱毓丿丿 丕賱鬲賯乇賷亘賷 賲賳 丕賱鬲毓賱賷賲丕鬲 "
-"丕賱鬲賷 賷爻鬲胤賷毓 丕賱賲毓丕賱噩 鬲賳賮賷匕賴丕 賮賷 丕賱孬丕賳賷丞 丕賱賵丕丨丿丞)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "丕賱鬲乇丿丿 (賲賷睾丕賴賷乇鬲夭)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "賲爻鬲賵賶 丕賱賲毓賱賵賲丕鬲 丕賱鬲賷 賷賲賰賳 丕賱丨氐賵賱 毓賱賷賴丕 賲賳 鬲毓賱賷賲丕鬲 cpuid"
+msgid "Accept user"
+msgstr "賵丕賮賯 毓賱賶 丕賱賲爻鬲禺丿賲"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "賲爻鬲賵賶 賴賵賷丞 丕賱賲毓丕賱噩"
+msgid "Server"
+msgstr "禺丕丿賲"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "毓丕卅賱丞 丕賱賲毓丕賱丨 (賲孬賱丕: 6 賱賮卅丞 i686)"
+msgid "Bad choice, try again\n"
+msgstr "丕禺鬲賷丕乇 爻賷卅, 丨丕賵賱 賲乇丞 兀禺乇賶\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "毓丕卅賱丞 賴賵賷丞 丕賱賲毓丕賱噩"
+msgid "Heard and McDonald Islands"
+msgstr "噩夭乇 賴賷乇丿 賵 賲丕賰丿賵賳丕賱丿"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "丕匕丕 賰丕賳 丕賱賲毓丕賱噩 賱丿賷賴 Cyrix 6x86 Coma bug"
+msgid "No alternative driver"
+msgstr "賱丕 賲卮睾賱 亘丿賷賱"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Toggle to expert mode"
+msgstr "丕賱賳鬲賯丕賱 丕賱賶 賵囟毓賷丞 丕賱禺亘賷乇"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "丕賲賰丕賳賷丕鬲 賲賲賷夭丞 賱賴匕丕 丕賱賲卮睾賱 (丕賲賰丕賳賷丞 丕賱賳爻禺 兀賵 丿毓賲 DVD)"
+msgid "(on this machine)"
+msgstr "(毓賱賶 賴匕丕 丕賱噩賴丕夭)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "丨噩賲 丕賱爻賵丕賯丞"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "毓賳賵丕賳 丕賱亘賵丕亘丕鬲 賷噩亘 兀賳 鬲賰賵賳 毓賱賶 丕賱賳爻賯 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "丨噩賲 (丕賱賲爻鬲賵賶 丕賱孬丕賳賷)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr "鬲賲 丕賷噩丕丿 丕賱賵賷賳賲賵丿賲 \"%s\", 賴賱 鬲乇賷丿 鬲孬亘賷鬲 丕賱亘乇丕賲噩 丕賱賲胤賱賵亘丞 責"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "丨噩賲 丕賱匕丕賰乇丞 丕賱賲禺亘卅賷丞"
+msgid "Looking at packages already installed..."
+msgstr "噩丕乇賷 丕賱鬲毓乇賮 毓賱賶 丕賱丨夭賲 丕賱賲孬亘鬲丞 賲爻亘賯丕賸..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- 兀噩賴夭丞 pci: 鬲毓胤賷 賲賳賮匕 PCI, 丕賱噩賴丕夭 賵 賵馗賷賮丞 賴匕賴 丕賱亘胤丕賯丞\n"
-"- 兀噩賴夭丞 eide: 丕賱噩賴丕夭 廿賲丕 兀賳 賷賰賵賳 噩賴丕夭 slave 兀賵 master\n"
-"- 兀噩賴夭丞 scsi: scsi bus 賵 賴賵賷丞 噩賴丕夭 scsi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "丕賱賲賰丕賳 毓賱賶 丕賱賭bus"
+msgid "Driver"
+msgstr "丕賱賲丨乇賰"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- 兀噩賴夭丞 PCI 賵 USB: 賴匕丕 賷毓乇囟 賯丕卅賲丞 丕賱賲氐賳毓賷賳 賵 丕賱兀噩賴夭丞 賵 丕賱賲氐賳毓賷賳 丕賱孬丕賳賵賷賷賳 賵 "
-"丕賱兀噩賴夭丞 丕賱孬丕賳賵賷丞 賱賴賵賷丕鬲 PCI/USB"
+"Linuxconf 賷賯賵賲 賮賷 亘毓囟 丕賱兀丨賷丕賳 亘丕賱鬲乇鬲賷亘 賱毓賲賱 亘毓囟 丕賱兀毓賲丕賱\n"
+"毓賳丿 丕賱廿賯賱丕毓 賱賱賲丨丕賮馗丞 毓賱賶 丕毓丿丕丿丕鬲 丕賱賳馗丕賲."
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
-# and not "Bus: datadatadata xxxxxxxx"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "賲毓乇賮 丕賱賭 Bus鈥"
+msgid "Printer on remote lpd server"
+msgstr "胤丕亘毓丞 毓賱賶 禺丕丿賲 lpd 亘毓賷丿"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"賳賵丕丞 賷賳賰爻 鬲丨鬲丕噩 丕賱賶 鬲卮睾賷賱 丨賱賯丞 丨爻丕亘賷丞 (Calculation Loop) 毓賳丿 丕賱廿賯賱丕毓 賱鬲賳卮賷胤 "
-"兀丿丕丞 毓丿 丕賱賵賯鬲. 賷鬲賲 丨賮馗 丕賱賳鬲賷噩丞 賰賭bogomips 賰胤乇賷賯丞 賱賱鬲兀賰丿 賲賳 氐丨丞 丕賱賲毓丕賱噩."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"賯亘賱 鬲孬亘賷鬲 兀賷 禺胤賵胤 鬲兀賰丿 兀賳賴 賱丿賷賰 丕賱丨賯 亘丕爻鬲禺丿丕賲賴賲 賵 鬲孬亘賷鬲賴賲 毓賱賶 丕賱賳馗丕賲.\n"
+"\n"
+"-賷賲賰賳賰 鬲孬亘賷鬲 丕賱禺胤賵胤 亘丕賱胤乇賷賯丞 丕賱毓丕丿賷丞. 賮賷 丨丕賱丕鬲 賳丕丿乇丞, 賯丿 鬲鬲爻亘亘 丕賱禺胤賵胤 "
+"丕賱賲夭賷賮丞 賮賷 鬲毓賱賷賯 禺丕丿賲 X."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "賯賳丕丞 EIDE/SCSI"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "丕賱賯賳丕丞"
+msgid "No mouse"
+msgstr "賱丕 賮兀乇丞"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "Germany"
+msgstr "兀賱賲丕賳賷丕"
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus鈥"
+msgid "Austria"
+msgstr "丕賱賳賲爻丕"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "賯丕卅賲丞 丕賱賲卮睾賱丕鬲 丕賱亘丿賷賱丞 賱亘胤丕賯丞 丕賱氐賵鬲"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "卮睾賾賱 \"sndconfig\" 亘毓丿 丕賱鬲孬亘賷鬲 賱鬲賴賷卅丞 亘胤丕賯丞 丕賱氐賵鬲 丕賱禺丕氐丞 亘賰"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "賲卮睾賱丕鬲 亘丿賷賱丞"
+msgid "Collapse Tree"
+msgstr "Collapse Tree"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "賴賱 鬲乇賷丿 兀賳 賷賯賵賲 夭乇 BackSpace 亘毓賲賱 賵馗賷賮丞 夭乇 Delete 賮賷 爻胤乇 丕賱兀賵丕賲乇責"
+msgid "Auto Install Configurator"
+msgstr "兀丿丕丞 丕毓丿丕丿 丕賱賲孬亘賾鬲 丕賱丌賱賷"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "賲賳 賮囟賱賰 丕禺鬲乇 鬲氐賲賷賲 賱賵丨丞 賲賮丕鬲賷丨賰"
+msgid "Configure networking"
+msgstr "鬲賴賷卅丞 丕賱卮亘賰丞"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "賱賲 兀鬲賲賰賳 賲賳 亘丿亍 丕賱鬲乇賯賷丞 丕賱丨賷丞 !!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "兀賷賳 鬲乇賷丿 鬲孬亘賷鬲 賲丨賲賾賱 丕賱廿賯賱丕毓責"
-#: ../../standalone/livedrake:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"賮囟賱丕 兀丿禺賱 賯乇氐 丕賱鬲孬亘賷鬲 賮賷 爻賵丕賯鬲賰 賵 丕囟睾胤 賲賵丕賮賯 毓賳丿賲丕 鬲賳鬲賴賷.\n"
-"廿匕丕 賱賲 賷賰賳 賯乇氐 丕賱鬲孬亘賷鬲 賱丿賷賰 丕囟睾胤 丕賱睾丕亍 賱賱廿賲鬲賳丕毓 毓賳 丕賱鬲丨丿賷孬 丕賱丨賷."
+"丕禺鬲賷丕乇賰 賱賱睾丞 丕賱賲賮囟賱丞 爻賷丐孬乇 毓賱賶 賱睾丞 賵孬丕卅賯 丕賱賲爻丕毓丿丞\n"
+"賵 亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 賵 丕賱賳馗丕賲 亘卮賰賱 毓丕賲. 兀賵?賸 丕禺鬲乇 丕賱賲賳胤賯丞 丕賱鬲賷\n"
+"鬲鬲賵丕噩丿 賮賷賴丕, 孬賲 丕賱賱睾丞 丕賱鬲賷 鬲鬲丨丿孬 亘賴丕.\n"
+"\n"
+"囟睾胤 夭乇 \"賲鬲賯丿賲\" 爻賷爻賲丨 賱賰 亘丕禺鬲賷丕乇 賱睾丕鬲\n"
+"兀禺乇賶 賱賷鬲賲 鬲孬亘賷鬲賴丕 毓賱賶 賲丨胤丞 丕賱毓賲賱 丕賱禺丕氐丞 亘賰,賵 賲賳 孬賲\n"
+"鬲孬亘賷鬲 丕賱賲賱賮丕鬲 丕賱禺丕氐丞 亘丕賱賱睾丕鬲 賱賵孬丕卅賯 丕賱賲爻丕毓丿丞 賵 丕賱鬲胤亘賷賯丕鬲, 賲孬賱丕賸\n"
+"丕匕丕 賰賳鬲 爻鬲爻鬲囟賷賮 賲爻鬲禺丿賲賷賳 賲賳 兀爻亘丕賳賷丕 毓賱賶 賲丕賰賷賳鬲賰, 丕禺鬲乇 丕?賳噩賱賷夭賷丞\n"
+"賰賱睾丞 丕賮鬲乇丕囟賷丞 賮賷 丕賱賳賲胤 丕賱卮噩乇賷 賵 \"丕?爻亘丕賳賷丞\" 賮賷 丕賱賯爻賲\n"
+"丕賱賲鬲賯丿賲.\n"
+"?丨馗 兀賳賰 賱爻鬲 賲賯賷丿丕賸 亘丕禺鬲賷丕乇 賱睾丞 賵丕丨丿丞 丕囟丕賮賷丞. 丨丕賱\n"
+"丕禺鬲賷丕乇賰 賱賱廿毓丿丕丿丕鬲 丕賱賲丨賱賷丞, 丕囟睾胤 夭乇 \"丕賱鬲丕賱賷 ->\"\n"
+"賱賱賲鬲丕亘毓丞.\n"
+"\n"
+"賱賱鬲睾賷賷乇 亘賷賳 丕賱賱睾丕鬲 丕賱賲鬲毓丿丿丞 丕賱賲孬亘鬲丞 毓賱賶 丕賱賳馗丕賲, 賷賲賰賳賰\n"
+"鬲卮睾賷賱 丕?賲乇 \"/usr/sbin/localedrake\"賰賲爻鬲禺丿賲 噩匕乇 賱鬲睾賷賷乇\n"
+"丕賱賱睾丞 丕賱賲爻鬲禺丿賲丞 毓賳 胤乇賷賯 丕賱賳馗丕賲 賰賰賱. 鬲卮睾賷賱 丕?賲乇 賰賲爻鬲禺丿賲 毓丕丿賷\n"
+"爻賷睾賷乇 賮賯胤 丕毓丿丕丿丕鬲 丕賱賱睾丞 賱賴匕丕 丕賱賲爻鬲禺丿賲 賮賯胤."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "睾賷賾乇 丕賱賯乇氐 丕賱賲丿賲噩"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "丕賱賭 %s 睾賷乇 賲丿毓賵賲 賲賳 賴匕丕 丕賱廿氐丿丕乇 賲賳 Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "鬲賲 毓賲賱 丕賱鬲睾賷賷乇, 賵 賱賰賳 賱賷鬲賲 鬲賮毓賷賱賴 賷噩亘 毓賱賷賰 丕賱禺乇賵噩"
+msgid "DHCP client"
+msgstr "DHCP 丕賱毓賲賷賱 "
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "丨賮馗 亘廿爻賲.."
+msgid "Restoring from file %s failed: %s"
+msgstr "賮卮賱鬲 丕賱廿爻鬲毓丕丿丞 賲賳 丕賱賲賱賮 %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "賮囟賱丕賸 兀丿禺賱 毓賳賵丕賳 亘乇賷丿賰 丕賱兀賱賰鬲乇賵賳賷 兀丿賳丕賴 "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serial, old C7 type)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "廿毓丿丕丿丕鬲 丕賱鬲賳亘賷賴"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "賴賱 兀賳鬲 賲鬲兀賰丿 兀賳賰 鬲乇賷丿 鬲賳氐賷亘 丕賱胤亘丕毓丞 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞責\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "爻賵賮 鬲爻鬲賱賲 鬲賳亘賷賴丕 丕匕丕 賰丕賳 丕賱鬲丨賲賷賱 兀毓賱賶 賲賳 賴匕賴 丕賱賯賷賲丞"
+msgid "New devfs device"
+msgstr "噩賴丕夭 devfs 噩丿賷丿"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "丨賲賱 丕賱廿毓丿丕丿丕鬲"
+msgid "ERROR: Cannot spawn %s."
+msgstr "ERROR: Cannot spawn %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "爻賵賮 鬲爻鬲賱賲 鬲賳亘賷賴丕賸 廿匕丕 賰丕賳鬲 兀丨丿 丕賱禺丿賲丕鬲 丕賱賲禺鬲丕乇丞 睾賷乇 毓丕賲賱丞."
+msgid "Boot Style Configuration"
+msgstr "丕毓丿丕丿 兀爻賱賵亘 丕賱廿賯賱丕毓"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "鬲夭丕賲賳 賵賯鬲 丌賱賷 (亘丕爻鬲禺丿丕賲 NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "廿毓丿丕丿丕鬲 丕賱禺丿賲丕鬲"
+msgid "Backup files not found at %s."
+msgstr "賲賱賮丕鬲 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷 睾賷乇 賲賵噩賵丿丞 毓賱賶 %s"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "禺丿賲丕鬲 Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "卮賰乇丕賸 賱丕禺鬲賷丕乇賰 Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "禺丿賲丕鬲 Webmin"
+msgid "Armenian (phonetic)"
+msgstr "丕賱兀乇賲賷賳賷丞 (氐賵鬲賷)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "禺丕丿賲 SSH"
+msgid "Card model:"
+msgstr "賳賵毓 丕賱亘胤丕賯丞"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "禺丕丿賲 Samba"
+msgid "Thin Client"
+msgstr "毓賲賷賱 賳丨賷賮 (Thin Client)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "禺丕丿賲 丕賱亘乇賷丿 Postfix"
+msgid "Start Server"
+msgstr "丕亘丿兀 丕賱禺丕丿賲"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "丕賱禺丕丿賲 FTP"
+msgid "Turkmenistan"
+msgstr "鬲乇賰賲丕賳爻鬲丕賳"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
+msgid "All remote machines"
+msgstr "賰賱 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "禺丕丿賲 丕賱賵賷亘 Apache"
+msgid "Install themes"
+msgstr "孬亘鬲 丕賱爻賲丕鬲"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"兀賴賱丕 亘賰賲 丕賱賶 兀丿丕丞 鬲賴賷卅丞 丕賱亘乇賷丿.\n"
-"\n"
-"賴賳丕 爻賷賲賰賳賰 廿毓丿丕丿 賳馗丕賲 丕賱鬲賳亘賷賴\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "鬲賴賷卅丞 鬲賳亘賷賴 丕賱亘乇賷丿"
+" 鬲丨丿賷孬丕鬲 2002 MandrakeSoft 賲賳 Stew Benedict <sbenedict\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "鬲賳亘賷丞 亘乇賷丿賷"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "賷乇噩賶 丕賱廿賳鬲馗丕乇, 噩丕乇賷 鬲丨賱賷賱 丕賱賲賱賮: %s"
+msgid "Preparing installation"
+msgstr "噩丕乇賷 丕賱鬲丨囟賷乇 賱賱鬲孬亘賷鬲"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "賲丨鬲賵賷丕鬲 丕賱賲賱賮"
+msgid "Edit selected host/network"
+msgstr "丨乇賾乇 丕賱賲爻鬲囟賷賮/丕賱卮亘賰丞 丕賱賲禺鬲丕乇丞"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "丕賱鬲賯賵賷賲"
+msgid "Add User -->"
+msgstr "丕囟賮 賲爻鬲禺丿賲 -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "丕丨鬲賷丕乇 賲賱賮"
+msgid "Nauru"
+msgstr "賳丕賵乇賵"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "賱賰賳 賱賷爻 賲賵丕卅賲丞"
+msgid "True Type fonts installation"
+msgstr "鬲孬亘賷鬲 禺胤賵胤 True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "丕賱賲賵丕卅賲丞"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "鬲丨賯賾賯 丌賱賷丕賸 賲賳 丕賱胤丕亘毓丕鬲 丕賱賲賵氐賵賱丞 賲亘丕卮乇丞賸 亘丕賱卮亘賰丞 丕賱賲丨賱賷丞"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "丕賱囟亘胤"
+msgid "LAN configuration"
+msgstr "廿毓丿丕丿 LAN"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "兀丿丕丞 賱賲乇丕賯亘丞 爻噩賱丕鬲 賳馗丕賲賰"
+msgid "hard disk model"
+msgstr "胤乇丕夭 丕賱賯乇氐 丕賱氐賱亘"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "亘丨孬"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "賱丕 賷賲賰賳賰 丕爻鬲禺丿丕賲 LVM Logical Volume 賱賳賯胤丞 丕賱鬲丨賲賷賱 %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "卮乇賵丨 兀丿賵丕鬲 Mandrake"
+msgid "Get Windows Fonts"
+msgstr "丕丨氐賱 毓賱賶 禺胤賵胤 Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "syslog"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "丕賱乇爻丕卅賱"
+msgid "Iranian"
+msgstr "丕賱廿賷乇丕賳賷賾丞"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "丕賱賲爻鬲禺丿賲"
+msgid "Croatia"
+msgstr "賰乇賵丕鬲賷丕"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/賲爻丕毓丿丞/_丨賵賱 丕賱亘乇賳丕賲噩..."
+msgid "Gateway:"
+msgstr "丕賱亘賵丕亘丞:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/禺賷丕乇丕鬲/丕禺鬲亘丕乇"
+msgid "Add server"
+msgstr "丕囟賮 禺丕丿賲"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/賲賱賮/-"
+msgid "Remote printer name"
+msgstr "丕爻賲 丕賱胤丕亘毓丞 丕賱亘毓賷丿丞"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/賲賱賮/丨賮馗 _亘丕爻賲"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "丕賱噩賴丕夭: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/賲賱賮/_丨賮馗"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "丕鬲賮丕賯賷丞 丕賱鬲乇禺賷氐"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/賲賱賮/_賮鬲丨"
+msgid "System Options"
+msgstr "禺賷丕乇丕鬲 丕賱賳馗丕賲"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "賮囟賱丕賸 兀丿禺賱 丕賱丿賱賷賱 丕賱賲賵噩賵丿丞 賮賷賴 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/賲賱賮/_噩丿賷丿"
+msgid "Please choose the desired security level"
+msgstr "賮囟賱丕賸 丕禺鬲乇 賲爻鬲賵賶 丕賱兀賲賳 丕賱匕賷 鬲乇賷丿賴"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "廿毓乇囟 爻噩賱丕鬲 丕賱賷賵賲 丕賱賲禺鬲丕乇 賮賯胤"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "賴匕丕 丕賱賲爻鬲囟賷賮 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞 賲爻亘賯丕賸, 賱丕 賷賲賰賳 丕囟丕賮鬲賴 賲乇丞 兀禺乇賶.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "賲丨丕賰丕丞 丕賱夭乇 丕賱孬丕賱孬責"
+msgid ", USB printer"
+msgstr ", 胤丕亘毓丞 USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "賮囟賱丕賸, 丕禺鬲乇 賳賵毓 丕賱賮兀乇丞 丕賱禺丕氐丞 亘賰."
+msgid "Choose the applications that will support the fonts:"
+msgstr "丕禺鬲乇 丕賱鬲胤亘賷賯丕鬲 丕賱鬲賷 爻鬲丿毓賲 丕賱禺胤賵胤 :"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "丕鬲氐賱 亘賭 %s"
+msgid "Configure X"
+msgstr "鬲賴賷卅丞 X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "丕賯胤毓 丕賱廿鬲氐丕賱 亘賭 %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "丕賱鬲賾乇賰賷丞 (胤乇丕夭 \"F\" 丕賱鬲賯賱賷丿賷)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr "鬲丨匕賷乇, 鬲賲 丕賷噩丕丿 丕鬲氐丕賱 廿賳鬲乇賳鬲 丌禺乇, 乇亘賲丕 賷賰賵賳 賷爻鬲禺丿賲 卮亘賰鬲賰"
+msgid "Congratulations!"
+msgstr "鬲賴丕賳賷賳丕!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "賲購爻鬲賯亘賱丞"
+msgid "Use owner id for execution"
+msgstr "丕爻鬲禺丿賲 owner id 賱賱鬲賳賮賷匕"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "賲亘毓賵孬丞"
+msgid "Down"
+msgstr "鬲丨鬲"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "賲購爻鬲賯亘賱: "
+msgid "Raw printer (No driver)"
+msgstr "胤丕亘毓丞 禺丕賲 (賱丕 賲卮睾賱)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "賲購乇爻賱: "
+msgid "Install rpm"
+msgstr "孬亘鬲 rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "丕噩乇丕亍 賲丨賱賷"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"賱胤亘丕毓丞 賲賱賮 賲賳 爻胤乇 丕賱兀賵丕賲乇 賷賲賰賳賰 兀賳 鬲爻鬲禺丿賲 丕賱兀賲乇 \"%s <file>\" 兀賵 兀賳 鬲爻鬲禺丿賲 "
+"兀丿丕丞 胤亘丕毓丞 乇爻賵賲賷丞: \"xpp <file>\" 兀賵 \"kprinter <file>\". 丕賱兀丿賵丕鬲 丕賱乇爻賵賲賷丞 "
+"鬲爻賲丨 賱賰 亘丕禺鬲賷丕乇 丕賱胤丕亘毓丕鬲 賵 鬲毓丿賷賱 禺賷丕乇丕鬲賴丕 亘爻賴賵賱丞.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "賲鬲賵爻胤"
+msgid "Time remaining "
+msgstr "丕賱賵賯鬲 丕賱賲鬲亘賯賷"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "廿毓丿丕丿丕鬲 丕賱兀賱賵丕賳"
+msgid "UK keyboard"
+msgstr "賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱亘乇賷胤丕賳賷丞"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"賮卮賱 丕賱廿鬲氐丕賱.\n"
-"鬲兀賰丿 賲賳 丕賱賵氐賱丞 賮賷 賲乇賰夭 鬲丨賰賲 Mandrake."
+msgid "Unmount"
+msgstr "丕丨匕賮 丕賱鬲丨賲賷賱"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "鬲賲 丕賱廿鬲氐丕賱."
+msgid "Uninstall Fonts"
+msgstr "丕禺匕賮 丕賱禺胤賵胤"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "丕賰鬲賲賱 賯胤毓 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "賮卮賱 賯胤毓 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "German (no dead keys)"
+msgstr "丕賱兀賱賲丕賳賷丞 (賱丕 賲賮丕鬲賷丨 賲賷鬲丞)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "噩丕乇賷 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "Transferring %s..."
+msgstr "噩丕乇賷 賳賯賱 %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "噩丕乇賷 賯胤毓 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 兀賱賮 賱賵賳 (15 亘鬲)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "丕賳鬲馗乇 賲賳 賮囟賱賰, 噩丕乇賷 丕禺鬲亘丕乇 丕賱廿鬲氐丕賱..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "賷賲賰賳賰 丕賱鬲氐丿賷乇 亘丕爻鬲禺丿丕賲 NFS 兀賵 Samba. 兀賷 賲賳賴賲丕 鬲乇賷丿"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "丕賱爻噩賱丕鬲"
+msgid "Reboot"
+msgstr "丕毓丕丿丞 丕賱鬲卮睾賷賱"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "賵賯鬲 丕賱廿鬲氐丕賱:"
+msgid "Gambia"
+msgstr "睾丕賲亘賷丕"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "爻乇毓丞 丕賱廿爻鬲賯亘丕賱"
+msgid "Mandrake Control Center"
+msgstr "賲乇賰夭 鬲丨賰賲 Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "爻乇毓丞 丕賱廿乇爻丕賱:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"賷賲賰賳賰 丕丿禺丕賱 賲賳丕賮匕 賲鬲賳賵毓丞. \n"
+"兀賲孬賱丞 氐丕賱丨丞 賴賷: 139/tcp 139/udp.\n"
+"丕賱賯 賳馗乇丞 毓賱賶 /etc/services 賱賲夭賷丿 賲賳 丕賱賲毓賱賵賲丕鬲."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "丕丨氐丕卅賷丕鬲"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"丕賱卮丕卮丞\n"
+"\n"
+" 賷賲賰賳 賱亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 丕賰鬲卮丕賮 賵 鬲賴賷卅丞 丕賱卮丕卮丞 丕賱賲鬲氐賱丞 亘賲丕賰賷賳鬲賰\n"
+"丌賱賷丕賸. 丕賳 賱賲 賷氐賱 匕賱賰, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱卮丕卮丞 丕賱鬲賷 賱丿賷賰\n"
+"賲賳 丕賱賯丕卅賲丞."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "丕賱鬲卮賰賷賱:"
+msgid "\t-Tape \n"
+msgstr "\t-丕賱卮乇賷胤 \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "賲乇丕賯亘丞 丕賱卮亘賰丞"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"賱丕 賷賵噩丿 賲鬲氐賮丨 賲孬亘鬲 毓賱賶 賳馗丕賲賰, 賮囟賱丕賸 賯賲 亘鬲孬亘賷鬲 賲鬲氐賮丨 丕匕丕 賰賳鬲 鬲乇睾亘 賮賷 鬲氐賮丨 賳馗丕賲 "
+"丕賱賲爻丕毓丿丞"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "噩丕乇賷 賯乇丕亍丞 亘賷丕賳丕鬲 丕賱胤丕亘毓丕鬲 丕賱賲孬亘鬲丞..."
+msgid "Remember this password"
+msgstr "鬲匕賰賾乇 賰賱賲丞 丕賱爻乇 賴匕賴"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "毓賳賵丕賳 IP/丕爻賲 丕賱賲爻鬲囟賷賮:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "賲卮丕乇賰丞 廿鬲氐丕賱 丕賱廿賳鬲乇賳鬲 賲賲賰賾賻賳丞 丕賱丌賳."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "賴匕丕 丕賱賲爻鬲囟賷賮 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞 賲爻亘賯丕賸, 賱丕 賷賲賰賳 丕囟丕賮鬲賴 賲乇丞 兀禺乇賶.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-丕賱卮亘賰丞 毓賳 胤乇賷賯 SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" 丕匕丕 鬲賲 丕賰鬲卮丕賮 丕賱胤丕亘毓丞 丕賱賲胤賱賵亘丞 丌賱賷丕賸, 賰賱 賲丕 毓賱賷賰 賴賵 丕禺鬲賷丕乇賴丕 賲賳 丕賱賯丕卅賲丞 孬賲 "
+"兀囟賮 丕爻賲 丕賱賲爻鬲禺丿賲, 賰賱賲丞 丕賱賲乇賵乇, 賵/兀賵 賲噩賲賵毓丞 丕賱毓賲賱 丕賳 丕丨鬲噩鬲 賱匕賱賰."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "賮囟賱丕 兀丿禺賱 丕爻賲 丕賱賲爻鬲囟賷賮 兀賵 毓賳賵丕賳 IP.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "丕爻鬲禺丿賲 丕賱賲爻丕丨丞 丕賱賮丕乇睾丞 毓賱賶 鬲噩夭卅丞 Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "丕禺鬲乇 丕賱賲爻鬲囟賷賮 丕賱鬲賷 賷噩亘 兀賳 鬲鬲賵賮乇 賱賴 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲丨賱賷丞:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s 鬲賲 丕賷噩丕丿賴 毓賱賶 %s, 賴賱 鬲乇賷丿 鬲賴賷卅鬲賴 丌賱賷丕賸責"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "賲卮丕乇賰丞 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲丨賱賷丞"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "賴匕賴 丕賱賲丕賰賷賳丞"
+msgid "XFree86 driver: %s\n"
+msgstr "賲卮睾賱 XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "丕丨匕賮 丕賱賲爻鬲囟賷賮 丕賱賲禺鬲丕乇"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "賴匕丕 丕賱賲爻鬲囟賷賮/丕賱卮亘賰丞 賲賵噩賵丿 賮賷 丕賱賯丕卅賲丞 賲爻亘賯丕賸, 賱丕 賷賲賰賳 丕囟丕賮鬲賴 賲乇丞 兀禺乇賶.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "丨乇乇 丕賱賲爻鬲囟賷賮 丕賱賲禺鬲丕乇"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" 鬲賯乇賷乇 DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "丕囟賮 賲爻鬲囟賷賮"
+msgid "Choose the packages you want to install"
+msgstr "丕禺鬲乇 丕賱丨夭賲 丕賱鬲賷 鬲乇賷丿 鬲孬亘賷鬲賴丕"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "鬲賵噩丿 賲丕賰賷賳丕鬲 賷賲賰賳 丕爻鬲禺丿丕賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 賲賳賴丕:"
+msgid "Papua New Guinea"
+msgstr "亘丕亘賵丕 睾賷賳賷丕 丕賱噩丿賷丿丞"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "丕爻鬲禺丿丕賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱亘毓賷丿丞"
+msgid "Serbian (cyrillic)"
+msgstr "丕賱氐乇亘賷丞 (爻賷乇賷賱賷)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "賰賱 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞"
+msgid "Make kernel message quiet by default"
+msgstr "丕噩毓賱 乇爻丕卅賱 丕賱賳賵丕丞 氐丕賲鬲丞 丕賮鬲乇丕囟賷丕賸"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "鬲賵丨丿 賲丕賰賷賳丕鬲 賷噩亘 兀賳 鬲賰賵賳 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲賵氐賵賱丞 賲丨賱賷丕賸 賲鬲賵賮乇丞 賱賴丕:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"賴賱 鬲乇賷丿 鬲毓賷賷賳 賴匕賴 丕賱胤丕亘毓丞 (\"%s\")\n"
+"賰胤丕亘毓丞 丕賮鬲乇丕囟賷丞責"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "丕爻鬲禺丿賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 丕賱賲爻鬲囟賷賮丕鬲: "
+msgid "The DHCP end range"
+msgstr "丨丿賵丿 DHCP end"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "丕爻鬲禺丿賲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 丕賱丨賵丕賷爻亘 丕賱亘毓賷丿丞"
+msgid "Creating bootdisk..."
+msgstr "丕賳卮丕亍 賯乇氐 丕賱廿賯賱丕毓..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱賲爻鬲囟賷賮丕鬲: "
+msgid "Wait please, testing your connection..."
+msgstr "丕賳鬲馗乇 賲賳 賮囟賱賰, 噩丕乇賷 丕禺鬲亘丕乇 丕賱廿鬲氐丕賱..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 賴匕賴 丕賱賲丕賰賷賳丞 賲鬲賵賮乇丞 賱賱丨賵丕爻賷亘 丕賱兀禺乇賶"
+msgid "Bringing down the network"
+msgstr "噩丕乇賷 丕睾賱丕賯 丕賱卮亘賰丞"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"賷賲賰賳賰 兀賷囟丕賸 兀賳 鬲賯乇乇 賴賳丕 丕匕丕 賰丕賳鬲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 毓賱賶 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 賷噩亘 "
-"兀賳 鬲賰賵賳 賲鬲賵賮乇丞 賱賴匕毓 丕賱賲丕賰賷賳丞."
+msgid "Login ID"
+msgstr "丕爻賲 丕賱丿禺賵賱"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"賴賳丕 賷賲賰賳賰 丕禺鬲賷丕乇 丕匕丕 賰丕賳鬲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲鬲氐賱丞 亘賴匕賴 丕賱賲丕賰賷賳丞 賷賲賰賳 丕賱賵氐賵賱 "
-"丕賱賷賴丕 賲賳 丕賱賲丕賰賷賳丕鬲 丕賱亘毓賷丿丞 賵 毓賳 胤乇賷賯 兀賷 賲丕賰賷賳丕鬲 亘毓賷丿丞."
+"NFS 亘乇賵鬲賵賰賵賱 卮丕卅毓 賱賲卮丕乇賰丞 丕賱賲賱賮丕鬲 毓賱賶 卮亘賰丕鬲\n"
+"TCP/IP. 賴匕賴 丕賱禺丿賲丞 鬲爻賲丨 賱賰 亘丕賱鬲丨賰賲 亘丕賱賲賱賮丕鬲 毓賳 胤乇賷賯 NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "噩丕乇賷 丕毓丕丿丞 鬲賵賱賷丿 賯丕卅賲丞 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱賲毓丿賾丞 ..."
+msgid "DHCP Client"
+msgstr "DHCP 丕賱毓賲賷賱"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 賲丕爻丨丕鬲 囟賵卅賷丞 噩丿賷丿丞..."
+msgid "dismiss"
+msgstr "丕賴賲丕賱"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 賲丕爻丨丕鬲 囟賵卅賷丞 賲毓丿賾丞..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "噩丕乇賷 丕賱胤亘丕毓丞/丕賱賲爻丨 毓賱賶 \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "賲卮丕乇賰丞 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞"
+msgid "omit raid modules"
+msgstr "RAID 丕賴賲賱 賵丨丿丕鬲 丕賱"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "兀囟賮 賲丕爻丨 囟賵卅賷 賷丿賵賷丕賸"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd 賴賵 賲乇丕賯亘 丕賱胤亘丕毓丞 丕賱匕賷 賷丨鬲丕噩賴 兀賲乇 lpr 賱賱毓賲賱 亘卮賱 氐丨賷丨. 兀爻丕爻丕賸\n"
+"賴賵 禺丕丿賲 賷賵氐賱 賵馗丕卅賮 丕賱胤亘丕毓丞 丕賱賶 丕賱胤丕亘毓丕鬲."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "丕賱亘丨孬 毓賳 賲丕爻丨丕鬲 囟賵卅賷丞 噩丿賷丿丞..."
+msgid "Internet Connection Configuration"
+msgstr "廿毓丿丕丿丕鬲 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "賱丕 鬲賵噩丿 賲丕爻丨丕鬲 囟賵卅賷丞 賲鬲賵賮乇丞 毓賱賶 賳馗丕賲賰.\n"
+msgid "comma separated numbers"
+msgstr "兀乇賯丕賲 賲賮氐賵賱丞 亘丕賱賮丕氐賱丞"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"丕賱賲丕爻丨丞 丕賱囟賵卅賷丞 丕賱鬲丕賱賷丞\n"
-"\n"
-"%s\n"
-"賲鬲賵賮乇丞 賱賳馗丕賲賰.\n"
+"毓賳丿 丕禺鬲賷丕乇賰 賱噩賴丕夭, 爻鬲爻鬲胤賷毓 乇丐賷丞 賲毓賱賵賲丕鬲 鬲丕噩賴丕夭 賮賷 丕賱丨賯賵賱 丕賱賲毓乇賵囟丞 賮賷 丕賱廿胤丕乇 "
+"丕賱兀賷賲賳 (\"賲毓賱賵賲丕鬲\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "丕賳賯賱 丕賱賯丕毓丿丞 丕賱賲禺鬲丕乇丞 丕賱賶 賮賵賯 亘賲爻鬲賵賶 賵丕丨丿"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞 丕賱鬲丕賱賷丞\n"
+"丕賱賲丕爻丨丞 丕賱囟賵卅賷丞 丕賱鬲丕賱賷丞\n"
"\n"
"%s\n"
"賲鬲賵賮乇丞 賱賳馗丕賲賰.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"鬲賲鬲 鬲賴賷卅丞 丕賱賲丕爻丨 丕賱囟賵卅賷 %s.\n"
-"賷賲賰賳賰 丕賱丌賳 賲爻丨 丕賱賲爻鬲賳丿丕鬲 亘丕爻鬲禺丿丕賲 \"XSane\" 賲賳 賮乇毓 賵爻丕卅胤 賲鬲毓丿丿丞/亘乇丕賲噩 乇爻賵賲賷丞 "
-"賮賷 賯丕卅賲丞 丕賱鬲胤亘賷賯丕鬲."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "丕禺鬲乇 丕賱噩賴丕夭 "
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "賴賱 鬲乇賷丿 賮毓賱丕賸 丨匕賮 丕賱胤丕亘毓丞 \"%s\"責"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "賮囟賱丕賸 丕禺鬲乇 丕賱噩賴丕夭 丕賱賲鬲氐賱 亘賴 %s"
+msgid "I can't find any room for installing"
+msgstr "賱丕 賷賲賰賳賳賷 丕賷噩丕丿 賲爻丕丨丞 賮丕乇睾丞 賱賱鬲孬亘賷鬲"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "噩丕乇賷 丕賱亘丨孬 毓賳 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞..."
+msgid "Default printer"
+msgstr "丕賱胤丕亘毓丞 丕賱廿賮鬲乇丕囟賷丞"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "鬲丨賯賯 丌賱賷丕賸 賲賳 丕賱賲賳丕賮匕 丕賱賲鬲賵賮乇丞"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"賱賯丿 賯賲鬲 亘鬲賴賷卅丞 胤乇賯 賲鬲毓丿丿丞 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲.\n"
+"丕禺鬲乇 丕賱胤乇賷賯丞 丕賱鬲賷 鬲乇賷丿 丕爻鬲禺丿丕賲賴丕.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(賲賱丨賵馗丞: 丕賱賲賳丕賮匕 丕賱賲鬲賵丕夭賷丞 賱丕 賷賲賰賳 丕賱鬲丨賯賯 賲賳賴丕 丌賱賷丕賸)"
+msgid "Modify RAID"
+msgstr "鬲毓丿賷賱 RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"丕賱賲丕爻丨 丕賱囟賵卅賷 %s 賷噩亘 丕毓丿丕丿賴 毓賳 胤乇賷賯 PrinterDrake.\n"
-"賷賲賰賳 鬲卮睾賷賱 PrinterDrake 賲賳 賲乇賰夭 鬲丨賰賲 Mandrake 賮賷 賯爻賲 丕賱毓鬲丕丿."
+"鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞 ISDN PCI, 賱賰賳 賱賲 賷鬲賲 丕賱鬲毓乇賮 毓賱賶 賳賵毓賴丕. 賮囟賱丕賸 丕禺鬲乇 亘胤丕賯丞 PCI "
+"賮賷 丕賱卮丕卮丞 丕賱鬲丕賱賷丞."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "賴匕丕 丕賱賭 %s 睾賷乇 賲丿毓賵賲"
+msgid "Add user"
+msgstr "丕囟賮 賲爻鬲禺丿賲"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "丕賱賭 %s 睾賷乇 賲毓乇賵賮 賲賳 賯亘賱 賴匕丕 丕賱廿氐丿丕乇 賲賳 Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "兀賯乇丕氐 RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "丕賱賭 %s 睾賷乇 賲丿毓賵賲 賲賳 賴匕丕 丕賱廿氐丿丕乇 賲賳 Mandrake Linux."
+msgid "Liberia"
+msgstr "賱賷亘乇賷丕"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "丕賱賲賳賮匕: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕爻賲 丕賱賵丕噩賴丞 丕賱賲鬲氐賱丞 亘丕賱廿賳鬲乇賳鬲.\n"
+"\n"
+"兀賲孬賱丞:\n"
+"\t\tppp+ 賱賵氐賱丕鬲 丕賱賲賵丿賲 賵 DSL, \n"
+"\t\teth0, 兀賵 eth1 賱賵氐賱丕鬲 丕賱賰賷亘賱, \n"
+"\t\tippp+ 賱賵氐賱丕鬲 ISDN.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "丕禺鬲乇 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱禺丕氐丞 亘賰"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "鬲賲 丕賰鬲卮丕賮 丕賱胤乇丕夭: %s"
+msgid "Format partitions"
+msgstr "鬲噩賴賷夭 丕賱鬲噩夭卅丕鬲"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "鬲氐丨賷丨 丌賱賷 賱鬲賴賷卅丞 CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "丕禺鬲乇 胤乇丕夭 丕賱賲丕爻丨 丕賱囟賵卅賷"
+msgid "Running \"%s\" ..."
+msgstr "噩丕乇賷 鬲卮睾賷賱 \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s 睾賷乇 賲賵噩賵丿 賮賷 賯丕毓丿丞 亘賷丕賳丕鬲 丕賱賲丕爻丨丕鬲 丕賱囟賵卅賷丞, 賴賱 鬲乇賷丿 鬲賴賷卅鬲賴 賷丿賵賷丕賸責"
+msgid "enable radio support"
+msgstr "鬲賲賰賷賳 丿毓賲 丕賱乇丕丿賷賵"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s 鬲賲 丕賷噩丕丿賴 毓賱賶 %s, 賴賱 鬲乇賷丿 鬲賴賷卅鬲賴 丌賱賷丕賸責"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "噩丕乇賷 丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "鬲賲鬲 丕囟丕賮丞 亘毓囟 丕賱毓鬲丕丿:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲 毓賱賶 丕賱賲爻鬲囟賷賮丕鬲: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "鬲賲鬲 丕夭丕賱丞 亘毓囟 丕賱兀噩賴夭丞 賮賷 賮卅丞 丕賱毓鬲丕丿 \"%s\":\n"
+msgid "Loopback file name: %s"
+msgstr "丕爻賲 賲賱賮 Loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"賳噩丕丨 MandrakeSoft 賲亘賳賷 毓賱賶 賲亘丿兀 丨乇賷丞 丕賱亘乇丕賲丨. 賳馗丕賲 丕賱鬲卮睾賷賱 丕賱噩丿賷丿 丕賱禺丕氐 亘賰 "
-"賴賵 賳鬲賷噩丞 賱賱鬲毓丕賵賳 賵 丕賱毓賲賱 丕賱噩丕丿 賲賳 噩夭亍 賲賳 賲噩鬲賲毓 賱賷賳賰爻 丨賵賱 丕賱毓丕賱賲"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "乇噩丕亍 丕禺鬲乇 丕賱胤丕亘毓丞 丕賱鬲賷 爻鬲匕賴亘 丕賱賷賴丕 賵馗丕卅賮 丕賱胤亘丕毓丞."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "兀賴賱丕賸 亘賰 賮賷 毓丕賱賲 丕賱賲氐丕丿乇 丕賱賲賮鬲賵丨丞"
+msgid "Do not transfer printers"
+msgstr "賱丕 鬲賳賯賱 丕賱胤丕亘毓丕鬲"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "卮賰乇丕賸 賱丕禺鬲賷丕乇賰 Mandrake Linux 9.1"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "鬲賵賯賷鬲 賲丕 賯亘賱 丕賯賱丕毓 丕賱氐賵乇丞 丕賱丕賮鬲乇丕囟賷丞"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"賱賲卮丕乇賰鬲賳丕 亘賲毓乇賮鬲賰 賵 賱賱賲爻丕毓丿丞 賮賷 亘賳丕亍 兀丿賵丕鬲 賱賷賳賰爻, 丕賳囟賲 丕賱賶 賲賳鬲丿賷丕鬲 丕賱賳賯丕卮 "
-"丕賱鬲賷 爻鬲噩丿賴丕 賮賷 氐賮丨丞 \"Community\" 毓賱賶 賲賵賯毓賳丕"
+"\n"
+"噩賲賷毓 丕賱丨賯賵賯 賲丨賮賵馗丞 (C) 2001-2002 賱賭MandrakeSoft \n"
+"\tDUPONT Sebastien (丕賱廿氐丿丕乇 丕賱兀氐賱賷)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" 賴匕丕 丕賱亘乇賳丕賲噩 賴賵 亘乇賳丕賲噩 丨乇; 賷賲賰賳賰 丕毓丕丿丞 鬲賵夭賷毓丞 賵/兀賵 鬲毓丿賷賱賴\n"
+" 鬲丨鬲 亘賳賵丿 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 (GPL) 賰賲丕 賳購卮賽乇鬲 毓賳 胤乇賷賯\n"
+" 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞; 廿賲丕 丕廿氐丿丕乇 丕賱孬丕賳賷 賲賳 丕賱鬲乇禺賷氐 兀賵\n"
+" 兀賷 賳爻禺丞 鬲丕賱賷丞 (丨爻亘 丕禺鬲賷丕乇賰).\n"
+"\n"
+" 賴匕丕 丕賱亘乇賳丕賲噩 賷購賵夭賾賻毓 毓賱賶 兀賲賱 兀賳 賷賰賵賳 賲賮賷丿丕,\n"
+" 賱賰賳 丿賵賳 兀賷 囟賲丕賳鈥; 丨鬲賶 亘丿賵賳 丕賱囟賲丕賳丞 丕賱賲賮賴賵賲丞\n"
+" 賱賱廿鬲噩丕乇 兀賵 丕賱賲賳丕爻亘丞 賱睾乇囟 賲毓賷賳. 丕賳馗乇\n"
+" 乇禺氐丞 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞 賱賱鬲賮丕氐賷賱.\n"
+"\n"
+" 賷噩亘 兀賳 鬲賰賵賳 賯丿 鬲爻賱賲鬲 賳爻禺丞 賲賳 鬲乇禺賷氐 GNU 丕賱毓賲賵賲賷丞 丕賱卮丕賲賱丞\n"
+" 賲毓 丕賱亘乇賳丕賲噩; 賮賷 丨丕賱丞 毓丿賲 鬲爻賱賲 丕賱乇禺氐丞 乇丕爻賱 噩賲毓賷丞 丕賱亘乇賲噩賷丕鬲 丕賱丨乇丞 毓賱賶 "
+"丕賱毓賳賵丕賳 丕賱鬲丕賱賷\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
+"02111-1307, USA.\n"
+"\n"
+" 卮賰乇 禺丕氐 丕賱賶:\n"
+" - pfm2afm: \n"
+"\t 賲賳 Ken Borgendale:\n"
+"\t 賷丨賵賾賱 禺胤賵胤 .pfm 賮賷 Windows 丕賱賶 禺胤賵胤 .afm (Adobe Font Matrix)\n"
+" - type1inst:\n"
+"\t 賲賳 James Macnicol: \n"
+"\t 賷賵賱丿 type1inst 賲賱賮丕鬲 fonts.dir 賵 fonts.scale 賵 Fontmap.\n"
+" - ttf2pt1: \n"
+"\t 賲賳 Andrew Weeks, Frank Siegert, Thomas Henlich 賵 Sergey Babkin \n"
+" 賷丨賵賱 禺胤賵胤 ttf 丕賱賶 禺胤賵胤 afm 賵 pfb\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"賴賱 鬲乇賷丿 賲毓乇賮丞 丕賱賲夭賷丿 毓賳 賲噩鬲賲毓 丕賱賲氐丕丿乇 丕賱賲賮鬲賵丨丞責 賰賳 噩夭亍丕賸 賲賳 毓丕賱賲 丕賱亘乇賲噩賷丕鬲 "
-"丕賱丨乇丞"
+msgid "Please check for multisession CD"
+msgstr "賮囟賱丕 賯賲 亘丕賱鬲兀卮賷乇 賴賳丕 丕匕丕 賰賳鬲 鬲爻鬲禺丿賲 賯乇氐 賲丿賲噩 賲鬲毓丿丿 丕賱噩賱爻丕鬲"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "user"
+msgstr "丕賱賲爻鬲禺丿賲"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 賷賲賰賾賳賰 賲賳 丕爻鬲禺丿丕賲 丌禺乇 丕氐丿丕乇丕鬲 丕賱亘乇丕賲噩 賱鬲卮睾賷賱 丕賱賲賱賮丕鬲 "
-"丕賱氐賵鬲賷丞, 賵 鬲丨乇賷乇 丕賱氐賵乇, 賵 鬲卮睾賷賱 賲賱賮丕鬲 丕賱賮賷丿賷賵"
+msgid "Use Hard Disk to backup"
+msgstr "丕爻鬲禺丿賲 丕賱賯乇氐 丕賱氐賱亘 賱賱賳爻禺 丕賱廿丨鬲賷丕胤賷"
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Configure"
+msgstr "廿毓丿丕丿"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "鬲賴賷卅丞 禺丕丿賲 胤乇賮賷丕鬲 Mandrake"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"賷賵賮乇 Mandrake Linux 9.1 11 賵丕噩賴丞 丕爻鬲禺丿丕賲 賷賲賰賳 鬲毓丿賷賱賴丕 賰丕賲賱丞賸: 賰賷丿賷 3, 噩賳賵賲 2, "
-"WindowsMaker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
+msgstr "鬲丨匕賷乇, 鬲賲 丕賷噩丕丿 丕鬲氐丕賱 廿賳鬲乇賳鬲 丌禺乇, 乇亘賲丕 賷賰賵賳 賷爻鬲禺丿賲 卮亘賰鬲賰"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Backup Users"
+msgstr "賲爻鬲禺丿賲賵 丕賱賲爻丕毓丿"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"賮囟賱丕賸 兀丿禺賱 丕爻賲 丕賱賲爻鬲囟賷賮.\n"
+"賷噩亘 兀賳 賷賰賵賳 丕爻賲 丕賱賲爻鬲囟賷賮 氐丕賱丨丕賸 賵 賰丕賲賱丕賸,\n"
+"賲孬賱 ``mybox.mylab.myco.com''.\n"
+"賷賲賰賳賰 兀賷囟丕賸 丕丿禺丕賱 毓賳賵丕賳 IP 丕賱禺丕氐 亘丕賱亘賵丕亘丞 丕賳 賵購噩丿鬲."
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 賴賷 丕賱亘賷卅丞 丕賱兀賲孬賱 賱鬲胤賵賷乇 丕賱亘乇丕賲噩"
+msgid "Select Printer Spooler"
+msgstr "丕禺鬲乇 Printer Spooler"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"丨賵賾賱 噩賴丕夭賰 丕賱賶 禺丕丿賲 賱賷賳賰爻 賯賵賷 亘賳賯乇丕鬲 賯賱賷賱丞 賲賳 丕賱賮兀乇丞: 禺丕丿賲 賵賷亘, 亘乇賷丿, 噩丿丕乇 "
-"賳丕乇賷, 賲賵噩賾賴, 禺丕丿賲 賲賱賮丕鬲 賵 胤亘丕毓丞, ..."
+msgid "Create new theme"
+msgstr "丕賳卮卅 爻賲丞 噩丿賷丿丞"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "丕噩毓賱 噩賴丕夭賰 禺丕丿賲丕賸 賷毓鬲賲丿 毓賱賷賴"
+msgid "Mandrake Tools Explanation"
+msgstr "卮乇賵丨 兀丿賵丕鬲 Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"禺賷丕乇丕鬲賳丕 丕賱賰孬賷乇 賲賳 丨賱賵賱 賳馗丕賲 賱賷賳賰爻 亘丕賱廿囟丕賮丞 丕賱賶 丕賱毓乇賵囟 丕賱禺丕氐丞 賵 丕賱賲賳鬲噩丕鬲 "
-"丕賱兀禺乇賶賶 賲鬲賵賮乇丞 賮賷 賲鬲噩乇賳丕 丕賱兀賱賰鬲乇賵賳賷:"
+msgid "No image found"
+msgstr "鬲毓匕乇 丕賷噩丕丿 氐賵乇丞"
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "賲鬲噩乇 MandrakeSoft 丕賱乇爻賲賷"
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"MandrakeSoft 鬲毓賲賱 噩賳亘丕賸 丕賱賶 噩賳亘 賲毓 兀賮囟賱 丕賱卮乇賰丕鬲 丕賱鬲賷 鬲賵賮乇 丨賱賵賱 賱丨鬲乇丕賮賷丞 "
-"賲鬲賵丕賮賯丞 賲毓 Mandrake Linux. 鬲賵噩丿 賯丕卅賲丞 亘賴丐賱丕亍 丕賱卮乇賰丕亍 賮賷 MandrakeStore"
+"賱賲 賷鬲賲 鬲孬亘賷鬲 亘毓囟 丕賱丨夭賲 丕賱賲賴賲丞 亘卮賱 氐丨賷丨.\n"
+"廿賲丕 兀賳 爻賵丕賯丞 丕賱賯乇氐 丕賱賲丿賲噩 兀賵 兀賳 丕賱賯乇氐 丕賱賲丿賲噩 賳賮爻賴 亘賴 毓賷亘 賲丕.\n"
+"鬲兀賰丿 賲賳 氐丨丞 丕賱賯乇氐 丕賱賲丿賲噩 毓賱賶 賰賲亘賷賵鬲乇 賲孬亘賾鬲 亘丕爻鬲禺丿丕賲 丕賱兀賲乇 \"rpm -qpl Mandrake/"
+"RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "鬲賲 丕賰鬲卮丕賮 丕賱胤乇丕夭: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
+"賲丿賷乇 毓乇囟 X11 賷爻賲丨 賱賰 亘鬲爻噩賷賱 丕賱丿禺賵賱 丕賱賶\n"
+"賳馗丕賲賰 賲毓 鬲卮睾賷賱 禺丕丿賲 丕賱賳賵丕賮匕 X 賵 賷丿毓賲 鬲卮睾賷賱\n"
+"毓丿丞 噩賱爻丕鬲 X 賲禺鬲賱賮丞 毓賱賶 賲丕賰賷賳鬲賰 丕賱賲丨賱賷丞 賮賷 賳賮爻 丕賱賵賯鬲."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "丨爻賾賳 賲爻鬲賵賶 丕賱兀賲賳"
+msgid "if set to yes, run the daily security checks."
+msgstr "if set to yes, run the daily security checks"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "賴匕丕 丕賱賲賳鬲噩 賲鬲賵賮乇 毓賱賶 賲賵賯毓 MandrakeStore"
+msgid "Azerbaijan"
+msgstr "兀匕乇亘賷噩丕賳"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "賱丕 賷賵噩丿 卮乇賷胤 賮賷 %s!"
-#: ../../share/advertising/11-mnf.pl:1
+# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
+# it displays on screen as "(US) Dvorak", following the same schema
+# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
+# that way the entry is also listed together with the other "Dvorak" entries.
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak鈥 (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"丕賱鬲丨賯 亘賮乇賷賯 丕賱丿毓賲 丕賱賮賳賷 賮賷 MandrakeSoft 賵 賲噩鬲賲毓 賱賷賳賰爻 毓賱賶 丕賱廿賳鬲乇賳鬲 賱賲卮丕乇賰丞 "
-"賲毓賱賵賲丕鬲賰 賵 賲爻丕毓丿丞 丕賱丌禺乇賷賳 亘兀賳 鬲氐亘丨 禺亘賷乇丕賸 賲毓鬲賲賻丿丕賸 賮賷 賲賵賯毓賳丕 賱賱丿毓賲 丕賱賮賳賷 毓賱賶 "
-"丕賱廿賳鬲乇賳鬲:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"丕毓孬乇 毓賱賶 丨賱賵賱 賱賲卮丕賰賱賰 亘丕爻鬲禺丿丕賲 亘賷卅丞 丕賱丿毓賲 丕賱賮賳賷 毓賱賶 丕賱廿賳鬲乇賳鬲 賮賷 MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "賲丕 賴賷 胤乇賷賯丞 鬲賵氐賷賱 丕賱胤丕亘毓丞責"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "賰賳 禺亘賷乇丕賸 賮賷 MandrakeExpert"
+msgid "Security level"
+msgstr "賲爻鬲賵賶 丕賱兀賲賳"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr "賰賱 賲卮賰賱丞 爻賷鬲賲 鬲鬲亘毓賴丕 賲賳 禺亘賷乇 賵丕丨丿 賲毓鬲賲丿 賲賳 MandrakeSoft."
+msgid "final resolution"
+msgstr "丿賯丞 丕賱毓乇囟 丕賱賳賴丕卅賷丞"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "亘賷卅丞 毓賱賶 丕賱廿賳鬲乇賳鬲 賱賱廿爻鬲噩丕亘丞 賱丕丨鬲賷丕噩丕鬲 丕賱丿毓賲 丕賱賮賳賷 賱賱卮乇賰丕鬲"
+msgid "Services"
+msgstr "丕賱禺丿賲丕鬲"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert 賱賱卮乇賰丕鬲"
+msgid "4 MB"
+msgstr "4 賲賷睾丕亘丕賷鬲"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -18720,10 +18786,6 @@ msgstr ""
"gnumeric) , 亘乇丕賲噩 毓乇囟 pdf, 丕賱禺"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "賲丨胤丞 毓賲賱"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "賲丨胤丞 兀賱毓丕亘"
@@ -18795,10 +18857,6 @@ msgstr ""
"亘賷卅丞 爻胤丨 賲賰鬲亘 賰賷丿賷, 丕賱亘賷卅丞 丕賱乇爻賵賲賷丞 丕賱兀爻丕爻賷丞 賲毓 賲噩賲賵毓丞 賲賳 丕賱兀丿賵丕鬲 丕賱賲氐丕丨亘丞"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "亘賷卅丕鬲 乇爻賵賲賷丞"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "賲丨胤丞 毓賲賱 噩賳賵賲"
@@ -18819,10 +18877,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 丕賱禺"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "鬲胤賵賷乇"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "亘乇丕賲噩 賵 賲賰鬲亘丕鬲 鬲胤賵賷乇 C 賵 C++"
@@ -18892,40 +18946,523 @@ msgstr "禺丕丿賲 NFS, 禺丕丿賲 SMB, 禺丕丿賲 亘乇賵賰爻賷, 禺丕丿賲 ssh"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "賲丨胤丞 賵爻丕卅胤 賲鬲毓丿丿丞"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"賲噩賲賵毓丞 賲賳 丕賱兀丿賵丕鬲 賱賯乇丕亍丞 賵 丕乇爻丕賱 丕賱亘乇賷丿 賵 丕賱兀禺亘丕乇 (pine, mutt, tin..) 賵 "
+"賱鬲氐賮丨 丕賱廿賳鬲乇賳鬲"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "賵氐賱丞 丕賱廿賳鬲乇賳鬲 賵 丕賱廿毓丿丕丿丕鬲"
+
+#~ msgid "Configure the connection"
+#~ msgstr "賯賲 亘廿毓丿丕丿 丕賱廿鬲氐丕賱"
+
+#~ msgid "Disconnect"
+#~ msgstr "丕賯胤毓 丕賱廿鬲氐丕賱"
+
+#~ msgid "Connect"
+#~ msgstr "丕鬲氐賱"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "賷賲賰賳賰 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "賷賲賰賳賰 丕賱丌賳 丕賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲 兀賵 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "兀賳鬲 賱爻鬲 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲 丨丕賱賷丕賸"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "賷賲賰賳賰 賯胤毓 丕賱廿鬲氐丕賱 兀賵 丕毓丕丿丞 鬲賴賷卅丞 丕賱賵氐賱丞."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "兀賳鬲 賲鬲氐賱 亘丕賱廿賳鬲乇賳鬲 丨丕賱賷丕賸"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "丕乇爻丕賱 丕賱賲賱賮丕鬲 毓賳 胤乇賷賯 FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "丕爻鬲禺丿賲 丕賱賳爻禺 丕賱鬲乇丕賰賲賷 (賱丕 鬲爻鬲亘丿賱 丕賱賳爻禺 丕賱廿丨鬲賷丕胤賷丞 丕賱賯丿賷賲丞)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "兀毓丿 鬲卮睾賷賱 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "丕噩毓賱 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "丕賰鬲亘 %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "丕賳爻禺 %s 丕賱賶 %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "丕賳爻禺 %s 丕丨鬲賷丕胤賷丕賸 丕賱賶 %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "鬲丨賵賷賱 禺胤賵胤 ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "鬲丨賵賷賱 丕賱禺胤賵胤"
+
+#~ msgid ""
+#~ "Choose the hard drive you want to erase in order to install your new\n"
+#~ "Mandrake Linux partition. Be careful, all data present on it will be "
+#~ "lost\n"
+#~ "and will not be recoverable!"
+#~ msgstr ""
+#~ "丕禺鬲乇 丕賱賯乇氐 丕賱氐賱亘 丕賱匕賷 鬲乇賷丿 賲丨賵賴 賱鬲孬亘賷鬲 鬲噩夭卅丞\n"
+#~ "Mandrake Linux 丕賱噩丿賷丿丞. 禺匕 丨匕乇賰, 賰賱 丕賱亘賷丕賳丕鬲 丕賱賲賵噩賵丿 毓賱賷賴 爻鬲囟賷毓\n"
+#~ "賵 賱賳 賷賲賰賳 丕爻鬲毓丕丿鬲賴丕!"
+
+#~ msgid ""
+#~ "\"Sound card\": if a sound card is detected on your system, it is "
+#~ "displayed\n"
+#~ "here. If you notice the sound card displayed is not the one that is\n"
+#~ "actually present on your system, you can click on the button and choose\n"
+#~ "another driver."
+#~ msgstr ""
+#~ "\"亘胤丕賯丞 丕賱氐賵鬲\": 丕匕丕 鬲賲 丕賰鬲卮丕賮 亘胤丕賯丞 氐賵鬲 毓賱賶 賳馗丕賲賰, 爻賷鬲賲 毓乇囟賴丕\n"
+#~ "賴賳丕. 丕匕丕 賱丕丨馗鬲 兀賳 亘胤丕賯丞 丕賱氐賵鬲 丕賱賲毓乇賵囟丞 賴賳丕 賱賷爻鬲 鬲賱賰 丕賱賲賵噩賵丿丞\n"
+#~ "賮毓賱丕賸 毓賱賶 賳馗丕賲賰, 賷賲賰賳賰 丕賱賳賯乇 毓賱賶 丕賱夭乇 賵 丕禺鬲賷丕乇 賲卮睾賱\n"
+#~ "丌禺乇."
+
+#~ msgid ""
+#~ "You can add additional entries in yaboot for other operating systems,\n"
+#~ "alternate kernels, or for an emergency boot image.\n"
+#~ "\n"
+#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
+#~ "partition.\n"
+#~ "\n"
+#~ "For Linux, there are a few possible options:\n"
+#~ "\n"
+#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
+#~ "select this boot option.\n"
+#~ "\n"
+#~ " * Image: this would be the name of the kernel to boot. Typically, "
+#~ "vmlinux\n"
+#~ "or a variation of vmlinux with an extension.\n"
+#~ "\n"
+#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+#~ "\n"
+#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
+#~ "assist in initializing video hardware, or to enable keyboard mouse "
+#~ "button\n"
+#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
+#~ "mouse.\n"
+#~ "The following are some examples:\n"
+#~ "\n"
+#~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+#~ "hda=autotune\n"
+#~ "\n"
+#~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+#~ "\n"
+#~ " * Initrd: this option can be used either to load initial modules before\n"
+#~ "the boot device is available, or to load a ramdisk image for an "
+#~ "emergency\n"
+#~ "boot situation.\n"
+#~ "\n"
+#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
+#~ "you\n"
+#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
+#~ "ramdisk larger than the default.\n"
+#~ "\n"
+#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
+#~ "read-only, to allow a file system check before the system becomes "
+#~ "``live''.\n"
+#~ "You can override the default with this option.\n"
+#~ "\n"
+#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+#~ "problematic, you can select this option to boot in ``novideo'' mode, "
+#~ "with\n"
+#~ "native frame buffer support.\n"
+#~ "\n"
+#~ " * Default: selects this entry as being the default Linux selection,\n"
+#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
+#~ "be\n"
+#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
+#~ msgstr ""
+#~ "You can add additional entries in yaboot for other operating systems,\n"
+#~ "alternate kernels, or for an emergency boot image.\n"
+#~ "\n"
+#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
+#~ "partition.\n"
+#~ "\n"
+#~ "For Linux, there are a few possible options:\n"
+#~ "\n"
+#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
+#~ "select this boot option.\n"
+#~ "\n"
+#~ " * Image: this would be the name of the kernel to boot. Typically, "
+#~ "vmlinux\n"
+#~ "or a variation of vmlinux with an extension.\n"
+#~ "\n"
+#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+#~ "\n"
+#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
+#~ "assist in initializing video hardware, or to enable keyboard mouse "
+#~ "button\n"
+#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
+#~ "mouse.\n"
+#~ "The following are some examples:\n"
+#~ "\n"
+#~ " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+#~ "hda=autotune\n"
+#~ "\n"
+#~ " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+#~ "\n"
+#~ " * Initrd: this option can be used either to load initial modules before\n"
+#~ "the boot device is available, or to load a ramdisk image for an "
+#~ "emergency\n"
+#~ "boot situation.\n"
+#~ "\n"
+#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
+#~ "you\n"
+#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
+#~ "ramdisk larger than the default.\n"
+#~ "\n"
+#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
+#~ "read-only, to allow a file system check before the system becomes "
+#~ "``live''.\n"
+#~ "You can override the default with this option.\n"
+#~ "\n"
+#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+#~ "problematic, you can select this option to boot in ``novideo'' mode, "
+#~ "with\n"
+#~ "native frame buffer support.\n"
+#~ "\n"
+#~ " * Default: selects this entry as being the default Linux selection,\n"
+#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
+#~ "be\n"
+#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
+
+#~ msgid ""
+#~ "DrakX will first detect any IDE devices present in your computer. It "
+#~ "will\n"
+#~ "also scan for one or more PCI SCSI cards on your system. If a SCSI card "
+#~ "is\n"
+#~ "found, DrakX will automatically install the appropriate driver.\n"
+#~ "\n"
+#~ "Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+#~ "your hard drives. If so, You'll have to specify your hardware by hand.\n"
+#~ "\n"
+#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
+#~ "you\n"
+#~ "want to configure options for it. You should allow DrakX to probe the\n"
+#~ "hardware for the card-specific options which are needed to initialize "
+#~ "the\n"
+#~ "adapter. Most of the time, DrakX will get through this step without any\n"
+#~ "issues.\n"
+#~ "\n"
+#~ "If DrakX is not able to probe for the options to automatically determine\n"
+#~ "which parameters need to be passed to the hardware, you'll need to "
+#~ "manually\n"
+#~ "configure the driver."
+#~ msgstr ""
+#~ "爻賷賯賵賲 DrakX 兀賵?賸 亘丕賱鬲丨賯賯 賲賳 賵噩賵丿 兀噩賴夭丞 IDE 毓賱賶 賴匕丕 丕賱賰賲亘賷賵鬲乇. 爻賷賯賵賲\n"
+#~ "兀賷囟丕賸 亘丕賱亘丨孬 毓賳 亘胤丕賯丕鬲 PCI SCSI 毓賱賶 賳馗丕賲賰. 丕匕丕 鬲賲 丕賷噩丕丿 亘胤丕賯丞\n"
+#~ "SCSI,爻賷賯賵賲 DrakX 亘鬲孬亘賷鬲 丕賱賲卮睾賱 丕賱賲賳丕爻亘 兀賵鬲賵賲丕鬲賷賰賷丕賸.\n"
+#~ "\n"
+#~ "賵 ?賳 毓賲賱賷丞 丕賱鬲丨賯賯 賲賳 丕賱毓鬲丕丿 賱賷爻鬲 禺丕賱賷丞 賲賳 丕?禺胤丕亍, 爻賷賯賵賲 DrakX 亘爻丐丕賱賰 毓賲賾丕 "
+#~ "丕匕丕\n"
+#~ "賰丕賳鬲 賱丿賷賰 亘胤丕賯丞 PCI SCSI. 丕賱賳賯乇 毓賱賶 \"賳毓賲\" 爻賷毓乇囟 賯丕卅賲丞 亘亘胤丕賯丕鬲 SCSI\n"
+#~ "賱鬲禺鬲丕乇 賲賳賴丕. 丕賳賯乇 \"?\" 丕匕丕 賰賳鬲 鬲毓賱賲 兀賳賴 ? 鬲賵噩丿 亘胤丕賯丕鬲 SCSI 毓賱賶\n"
+#~ "賲丕賰賷賳鬲賰. 丕匕丕 賱賲 鬲賰賳 賲鬲兀賰丿丕賸, 賷賲賰賳賰 丕賱鬲兀賰丿 賲賳 賯丕卅賲丞 丕賱毓鬲丕丿 丕賱鬲賷 鬲賲 丕賷噩丕丿賴丕\n"
+#~ "毓賱賶 賲丕賰賷賳鬲賰 毓賳 胤乇賷賯 丕禺鬲賷丕乇 \"毓乇囟 賲毓賱賵賲丕鬲 丕賱毓鬲丕丿\" 賵 賳賯乇\n"
+#~ "\"丕賱鬲丕賱賷->\". 鬲兀賰丿 賲賳 賯丕卅賲丞 丕賱毓鬲丕丿 孬賲 丕囟睾胤 毓賱賶 夭乇 \"丕賱鬲丕賱賷\n"
+#~ "->\" 賱賱毓賵丿丞 丕賱賶 卮丐丕賱 賵丕噩賴丞 SCSI.\n"
+#~ "\n"
+#~ "丕匕丕 丕囟胤乇乇鬲 丕賱賶 鬲丨丿賷丿 賲賵丕卅賲 PCI SCSI 賷丿賵賷丕賸, 賮爻賷爻兀賱賰 DrakX 毓賲賾丕 丕匕丕 賰賳鬲\n"
+#~ "鬲乇賷丿 鬲賴賷卅丞 丕賱禺賷丕乇丕鬲 丕賱禺丕氐丞 亘賴丕. 賷噩亘 兀賳 鬲爻賲丨 賱賭 DrakX 亘兀賳 賷鬲丨賯賯 賲賳\n"
+#~ "丕賱毓鬲丕丿 賱賱禺賷丕乇丕鬲 丕賱禺丕氐丞 亘丕賱亘胤丕賯丞 賵 丕賱鬲賷 賷賹購丨鬲丕噩 丕賱賷賴丕 賱賷鬲賲 亘丿亍\n"
+#~ "毓賲賱 丕賱亘胤丕賯丞. 賮賷 兀睾賱亘 丕?賵賯丕鬲, 爻賷賯賵賲 DrakX 亘丕賱禺胤賵丞 丿賵賳 兀賷\n"
+#~ "賲卮丕賰賱.\n"
+#~ "\n"
+#~ "丕匕丕 賱賲 賷鬲賲賰賳 DrakX 賲賳 丕賱鬲毓乇賮 毓賱賶 丕賱禺賷丕乇丕鬲 丕賱囟乇賵乇賷丞賱鬲賲乇賷乇賴丕\n"
+#~ "丕賱賶 丕賱毓鬲丕丿, 賮賮賷 賴匕賴 丕賱丨丕賱 爻鬲丨鬲丕噩 丕賱賶 鬲賴賷卅丞\n"
+#~ "丕賱賲卮睾賾賱 賷丿賵賷丕賸."
+
+#~ msgid ""
+#~ "After you have configured the general bootloader parameters, the list of\n"
+#~ "boot options that will be available at boot time will be displayed.\n"
+#~ "\n"
+#~ "If there are other operating systems installed on your machine they will\n"
+#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
+#~ "options by clicking \"Add\" to create a new entry; selecting an entry "
+#~ "and\n"
+#~ "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" "
+#~ "validates\n"
+#~ "your changes.\n"
+#~ "\n"
+#~ "You may also not want to give access to these other operating systems to\n"
+#~ "anyone who goes to the console and reboots the machine. You can delete "
+#~ "the\n"
+#~ "corresponding entries for the operating systems to remove them from the\n"
+#~ "bootloader menu, but you will need a boot disk in order to boot those "
+#~ "other\n"
+#~ "operating systems!"
+#~ msgstr ""
+#~ "亘毓丿賲丕 賯賲鬲 亘鬲賴賷卅丞 丕賱賲毓丕賲?鬲 丕賱毓丕賲丞 賱賲丨賲賾賱 丕?賯賱丕毓, 賮爻賷鬲賲\n"
+#~ "毓乇囟 賯丕卅賲丞 禺賷丕乇丕鬲 丕?賯賱丕毓 丕賱賲鬲賵賮乇丞 毓賳丿 亘丿亍 丕賱鬲卮睾賷賱.\n"
+#~ "\n"
+#~ "丕匕丕 賰丕賳鬲 賴賳丕賰 兀賳馗賲丞 鬲卮睾賷賱 兀禺乇賶 賲孬亘鬲丞 毓賱賶 賲丕賰賷賳鬲賰 賮爻賷鬲賲 丕囟丕賮鬲賴丕\n"
+#~ "丌賱賷丕賸 丕賱賶 賯丕卅賲丞 丕?賯賱丕毓. 賷賲賰賳賰 丕賱鬲丨賰賲 亘丕賱禺賷丕乇丕鬲\n"
+#~ "丕賱賲賵噩賵丿丞 亘賳賯乇 \"丕囟賮\" ?賳卮丕亍 賲丿禺賱 噩丿賷丿, 賵 丕禺鬲賷丕乇 賲丿禺賱 賵\n"
+#~ "賳賯乇 \"鬲毓丿賷賱\" 兀賵 \"丨匕賮\" 賱鬲毓丿賷賱 兀賵 丨匕賮 丕賱賲丿禺賱. \"賲賵丕賮賯\" 賷鬲兀賰丿\n"
+#~ "賲賳 鬲睾賷賷乇丕鬲賰.\n"
+#~ "\n"
+#~ "乇亘賲丕 ? 鬲乇賷丿 ?賷 卮禺氐 賷鬲賲賰賳 賲賳 丕毓丕丿丞 鬲卮睾賷賱 丕賱賲丕賰賷賳丞 兀賳 賷爻鬲胤賷毓\n"
+#~ "丕賱賵氐賱 丕賱賶 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕?禺乇賶. 賷賲賰賳賰 丨匕賮 丕賱賲丿丕禺賱 丕賱賲賯丕亘賱丞\n"
+#~ "?賳馗賲丞 丕賱鬲卮睾賷賱 賱丨匕賮賴丕 賲賳 賯丕卅賲丞 賲丨賲賾賱 丕?賯賱丕毓, 賱賰賳 賮賷 賴匕賴 丕賱丨丕賱丞 爻鬲丨鬲丕噩 丕賱賶 "
+#~ "賯乇氐\n"
+#~ "賲乇賳 賱賱廿賯?毓 賰賷 鬲鬲賲賰賳 賲賳 丕賱賵氐賵賱 丕賱賶 兀賳馗賲丞\n"
+#~ "丕賱鬲卮睾賷賱 丕?禺乇賶!"
+
+#~ msgid ""
+#~ "Depending on the default language you chose in Section , DrakX will\n"
+#~ "automatically select a particular type of keyboard configuration. "
+#~ "However,\n"
+#~ "you might not have a keyboard that corresponds exactly to your language:\n"
+#~ "for example, if you are an English speaking Swiss person, you may have a\n"
+#~ "Swiss keyboard. Or if you speak English but are located in Quebec, you "
+#~ "may\n"
+#~ "find yourself in the same situation where your native language and "
+#~ "keyboard\n"
+#~ "do not match. In either case, this installation step will allow you to\n"
+#~ "select an appropriate keyboard from a list.\n"
+#~ "\n"
+#~ "Click on the \"More \" button to be presented with the complete list of\n"
+#~ "supported keyboards.\n"
+#~ "\n"
+#~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+#~ "dialog will allow you to choose the key binding that will switch the\n"
+#~ "keyboard between the Latin and non-Latin layouts."
+#~ msgstr ""
+#~ "丕毓鬲賲丕丿丕賸 毓賱賶 丕賱賱睾丞 丕?賮鬲乇丕囟賷丞 丕賱鬲賷 丕禺鬲乇鬲賴丕 賮賷 賴匕丕 丕賱賯爻賲, 爻賷賯賵賲 DrakX\n"
+#~ "亘丕禺鬲賷丕乇 鬲賴賷卅丞 賱賵丨丞 丕賱賲賮丕鬲賷丨 丌賱賷丕賸. 毓賲賵賲丕賸,\n"
+#~ "乇亘賲丕 賱賷爻鬲 賱丿賷賰 賱賵丨丞 賲賮丕鬲賷丨 賲賯丕亘賱丞 亘卮賰賱 賲亘丕卮乇 賱賱睾鬲賰:\n"
+#~ "賲孬賱丕賸 乇亘賲丕 鬲賰賵賳 毓乇亘賷丕賸 賲鬲賰賱賲丕賸 亘丕賱賱睾丞 丕?賳噩賱賷夭賷丞, 乇亘賲丕 鬲賰賵賳 賱丿賷賰\n"
+#~ "賱賵丨丞 賲賮丕鬲賷丨 爻賵賷爻乇賷丞. 丕匕丕 賰賳鬲 鬲鬲賰賱賲 丕?賳噩賱賷夭賷丞 賱賰賳 賲賵噩賵丿 賮賷 賰賷亘賰, 乇亘賲丕\n"
+#~ "鬲噩丿 賳賮爻賰 賮賷 賳賮爻 丕賱賲賵賯賮 丨賷孬 ? 鬲鬲胤丕亘賯 賱睾鬲賰 賲毓 賱賵丨丞 丕賱賲賮丕鬲賷丨.\n"
+#~ "賮賷 丕賱丨丕賱鬲賷賳, 爻鬲爻賲丨 賱賰 禺胤賵丞 丕賱鬲孬亘賷鬲 爻鬲爻賲丨 賱賰 亘丕禺鬲賷丕乇\n"
+#~ "賱賵丨丞 賲賮丕鬲賷丨 賲賳丕爻亘丞 賲賳 丕賱賯丕卅賲丞.\n"
+#~ "\n"
+#~ "丕賳賯乇 夭乇 \"丕賱賲夭賷丿\" 賱毓乇囟 賯丕卅賲丞 亘賰賱 賱賵丨丕鬲 丕賱賲賮丕鬲賷丨\n"
+#~ "丕賱賲丿毓賵賲丞.\n"
+#~ "\n"
+#~ "丕匕丕 丕禺鬲乇鬲 賱賵丨丞 賲賮丕鬲賷丨 賱丨乇賵賮 睾賷乇 ?鬲賷賳賷丞, 賮爻賷爻賲丨 賱賰\n"
+#~ "賲乇亘毓 丕賱丨賵丕乇 丕賱鬲丕賱賷 亘丕禺鬲賷丕乇 丕禺鬲氐丕乇丕鬲 賱賵丨丞 丕賱賲賮丕鬲賷丨 丕賱鬲賷\n"
+#~ "爻鬲睾賷乇 賵囟毓 賱賵丨丞 丕賱賲賮丕鬲賷丨 亘賷賳 丕賱丨乇賵賮 丕賱賱丕鬲賷賳賷丞 賵 丕賱睾賷乇 ?鬲賷賳賷丞."
+
+#~ msgid ""
+#~ "This step is activated only if an old GNU/Linux partition has been found "
+#~ "on\n"
+#~ "your machine.\n"
+#~ "\n"
+#~ "DrakX now needs to know if you want to perform a new install or an "
+#~ "upgrade\n"
+#~ "of an existing Mandrake Linux system:\n"
+#~ "\n"
+#~ " * \"Install\": For the most part, this completely wipes out the old\n"
+#~ "system. If you wish to change how your hard drives are partitioned, or\n"
+#~ "change the file system, you should use this option. However, depending "
+#~ "on\n"
+#~ "your partitioning scheme, you can prevent some of your existing data "
+#~ "from\n"
+#~ "being over- written.\n"
+#~ "\n"
+#~ " * \"Upgrade\": this installation class allows you to update the "
+#~ "packages\n"
+#~ "currently installed on your Mandrake Linux system. Your current\n"
+#~ "partitioning scheme and user data is not altered. Most of other\n"
+#~ "configuration steps remain available, similar to a standard "
+#~ "installation.\n"
+#~ "\n"
+#~ "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+#~ "running version \"8.1\" or later. Performing an Upgrade on versions "
+#~ "prior\n"
+#~ "to Mandrake Linux version \"8.1\" is not recommended."
+#~ msgstr ""
+#~ "賷鬲賲 鬲賳卮賷胤 賴匕賴 丕賱禺胤賵丞 賮賯胤 丕匕丕 鬲賲 丕賷噩丕丿 鬲噩夭卅丞 賱賷賳賰爻 賯丿賷賲丞\n"
+#~ "毓賱賶 噩賴丕夭賰.\n"
+#~ "\n"
+#~ "賷丨鬲丕噩 DrakX 丕?賳 丕賱賶 兀賳 賷毓賱賲 丕匕丕 賰賳鬲 鬲乇賷丿 丕賱鬲孬亘賷鬲 賲賳 丕賱氐賮乇 兀賵\n"
+#~ "鬲乇賷丿 鬲乇賯賷丞 賳馗丕賲 Mandrake Linux 丕賱賲賵噩賵丿 賱丿賷賰 賲爻亘賯丕賸:\n"
+#~ "\n"
+#~ " * \"鬲孬亘賷鬲\": 賮賷 丕?睾賱亘 鬲賯賵賲 亘丕夭丕賱丞 丕賱賳馗丕賲 丕賱賯丿賷賲\n"
+#~ "賰賱賷丕賸. 丕匕丕 賰賳鬲 鬲乇賷丿 鬲睾賷賷乇 鬲噩夭卅丕鬲 丕賱賯乇氐 丕賱氐賱亘, 兀賵 鬲乇賷丿\n"
+#~ "鬲睾賷賷乇 賳馗丕賲 丕賱賲賱賮丕鬲, 毓賱賷賰 丕禺鬲賷丕乇 賴匕丕 丕賱禺賷丕乇. 毓賲賵賲丕賸 丕毓鬲賲丕丿丕\n"
+#~ "毓賱賶 賰賷賮賷丞 鬲噩夭卅丞 丕賱賯乇氐 丕賱氐賱亘 賱丿賷賰. 賷賲賰賳賰 賲賳毓 丕夭丕賱丞 亘毓囟\n"
+#~ "亘賷丕賳丕鬲賰 丕賱賲賵噩賵丿丞 賲爻亘賯丕賸.\n"
+#~ " * \"鬲乇賯賷丞\": 賮卅丞 丕賱鬲孬亘賷鬲 賴匕賴 鬲爻賲丨 賱賰 亘鬲丨丿賷孬 丕賱丨夭賲\n"
+#~ "毓賱賶 賳馗丕賲 Mandrake Linux 丕賱禺丕氐 亘賰. 賱賳 賷鬲賲 鬲睾賷賷乇\n"
+#~ "亘賷丕賳丕鬲賰 兀賵 鬲賯爻賷賲丕鬲 丕賱賯乇氐 丕賱氐賱亘. 兀睾賱亘 禺胤賵丕鬲 丕賱鬲賴賷卅丞 丕?禺乇賶\n"
+#~ "賱丕 鬲夭丕賱 賲賵噩賵丿丞, 賲孬賱 丕賱鬲孬亘賷鬲 丕賱丕毓鬲賷丕丿賷.\n"
+#~ "\n"
+#~ "丕爻鬲禺丿丕賲 禺賷丕乇 ``丕賱鬲乇賯賷丞'' 賷噩亘 兀賳 賷毓賲賱 亘卮賰賱 噩賷丿 毓賱賶\n"
+#~ "丕氐丿丕乇丕鬲 Mandrake Linux \"8.1\" 兀賵 賲丕 賮賵賯. ? 賷賳氐丨 亘丕賱鬲乇賯賷丞\n"
+#~ "賲賳 丕氐丕丿乇丕鬲 Mandrake Linux 賯亘賱 \"8.1\"."
+
+#~ msgid ""
+#~ "At this point, DrakX will allow you to choose the security level desired\n"
+#~ "for the machine. As a rule of thumb, the security level should be set\n"
+#~ "higher if the machine will contain crucial data, or if it will be a "
+#~ "machine\n"
+#~ "directly exposed to the Internet. The trade-off of a higher security "
+#~ "level\n"
+#~ "is generally obtained at the expense of ease of use.\n"
+#~ "\n"
+#~ "If you do not know what to choose, keep the default option."
+#~ msgstr ""
+#~ "毓賳丿 賴匕賴 丕賱賳賯胤丞, 爻賷爻賲丨 賱賰 DrakX 亘丕禺鬲賷丕乇 丕賱賲爻鬲賵賶 丕賱兀賲賳賷 丕賱匕賷 鬲乇睾亘 亘賴\n"
+#~ "賱賴匕賴 丕賱賲丕賰賷賳丞. 亘丿賷賴賷丕賸, 賷噩亘 鬲毓賷賷賳 賲爻鬲賵賶 兀賲賳賷\n"
+#~ "毓丕賱賺 丕匕丕 賰丕賳鬲 丕賱賲丕賰賷賳丞 鬲丨鬲賵賷 毓賱賶 賲毓賱賵賲丕鬲 賴丕賲丞, 兀賵 丕匕丕 賰丕賳鬲 丕賱賲丕賰賷賳丞\n"
+#~ "爻鬲購爻鬲禺丿賲 賱賱廿鬲氐丕賱 亘丕賱廿賳鬲乇賳鬲. 丕賳 丕爻鬲禺丿丕賲 賲爻鬲賵賶 兀賲賳賷 毓丕賱賺 賷兀鬲賷\n"
+#~ "毓丕丿丞 毓賱賶 丨爻丕亘 爻賴賵賱丞 丕賱廿爻鬲禺丿丕賲.\n"
+#~ "\n"
+#~ "丕匕丕 賱賲 鬲賰賳 鬲乇賷丿 丕賱廿禺鬲賷丕乇, 丕丨賮馗 丕賱丕禺鬲賷丕乇 丕賱廿賮鬲乇丕囟賷."
+
+#~ msgid ""
+#~ "Monitor\n"
+#~ "\n"
+#~ " The installer can normally automatically detect and configure the\n"
+#~ "monitor connected to your machine. If it is not the case, you can choose "
+#~ "in\n"
+#~ "this list the monitor you actually own."
+#~ msgstr ""
+#~ "丕賱卮丕卮丞\n"
+#~ "\n"
+#~ " 賷賲賰賳 賱亘乇賳丕賲噩 丕賱鬲孬亘賷鬲 丕賰鬲卮丕賮 賵 鬲賴賷卅丞 丕賱卮丕卮丞 丕賱賲鬲氐賱丞 亘賲丕賰賷賳鬲賰\n"
+#~ "丌賱賷丕賸. 丕賳 賱賲 賷氐賱 匕賱賰, 賷賲賰賳賰 丕禺鬲賷丕乇 丕賱卮丕卮丞 丕賱鬲賷 賱丿賷賰\n"
+#~ "賲賳 丕賱賯丕卅賲丞."
+
+#~ msgid ""
+#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+#~ "local time according to the time zone you selected. If the clock on your\n"
+#~ "motherboard is set to local time, you may deactivate this by unselecting\n"
+#~ "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
+#~ "system clock and the hardware clock are in the same timezone. This is\n"
+#~ "useful when the machine also hosts another operating system like "
+#~ "Windows.\n"
+#~ "\n"
+#~ "The \"Automatic time synchronization \" option will automatically "
+#~ "regulate\n"
+#~ "the clock by connecting to a remote time server on the Internet. For "
+#~ "this\n"
+#~ "feature to work, you must have a working Internet connection. It is best "
+#~ "to\n"
+#~ "choose a time server located near you. This option actually installs a "
+#~ "time\n"
+#~ "server that can used by other machines on your local network."
+#~ msgstr ""
+#~ "賷賯賵賲 賱賷賳賰爻 亘廿丿丕乇丞 丕賱賵賯鬲 丨爻亘 鬲賵賯賷鬲 睾乇賷賳鬲卮 孬賲 賷鬲乇噩賲賴 丕賱賶\n"
+#~ "丕賱鬲賵賯賷鬲 丕賱賲丨賱賷 丨爻亘 丕賱賲賳胤賯丞 丕賱夭賲賳賷丞 丕賱鬲賷 丕禺鬲乇鬲賴丕. 丕匕丕 賰丕賳鬲 丕賱爻丕毓丞\n"
+#~ "丕賱鬲賷 賮賷 丕賱賱賵丨丞 丕賱乇卅賷爻賷丞 賲囟亘賵胤丞 毓賱賶 丕賱鬲賵賯賷鬲 丕賱賲丨賱賷, 賷賲賰賳賰 丕夭丕賱丞 鬲賳卮賷胤 匕賱賰\n"
+#~ "毓賳 胤乇賷賯 丕夭丕賱丞 丕賱鬲兀卮賷乇 賲賳 \"爻丕毓丞 丕賱噩賴丕夭 賲囟亘賵馗丞 毓賱賶 鬲賵賯賷鬲 睾乇賷賳鬲卮\" 賵 丕賱鬲賷 "
+#~ "爻鬲噩毓賱\n"
+#~ "賱賷賳賰爻 賷毓賱賲 兀賳 爻丕毓丞 丕賱賳馗丕賲 賵 爻丕毓丞 丕賱噩賴丕夭 毓賱賶 賳賮爻 丕賱鬲賵賯賷鬲. 賴匕丕\n"
+#~ "賲賮賷丿 毓賳丿賲丕 鬲爻鬲囟賷賮 丕賱賲丕賰賷賳丞 賳馗丕賲 鬲卮睾賷賱 丌禺乇 賲孬賱 Windows.\n"
+#~ "\n"
+#~ "禺賷丕乇 \"鬲夭丕賲賳 丌賱賷 賱賱賵賯鬲\" 爻賷賯賵賲 丌賱賷丕賸 亘囟亘胤 丕賱爻丕毓丞 毓賳 胤乇賷賯\n"
+#~ "丕?鬲氐丕賱 亘禺丕丿賲 賵賯鬲 亘毓賷丿 毓賱賶 丕?賳鬲乇賳鬲. 賰賷 鬲毓賲賱 賴匕賴 丕賱賲賷夭丞,\n"
+#~ "賷噩亘 兀賳 鬲賰賵賳 賱丿賷賰 賵氐賱丞 丕賳鬲乇賳鬲 毓丕賲賱丞. 賲賳 丕?賮囟賱 丕禺鬲賷丕乇 禺丕丿賲\n"
+#~ "丕賱賵賯鬲 丕?賯乇亘 丕賱賷賰. 賴匕丕 丕賱禺賷丕乇 賷孬亘鬲 禺丕丿賲 賵賯鬲\n"
+#~ "賷賲賰賳 丕爻鬲禺丿丕賲賴 毓賳 胤乇賷賯 丕賱賲丕賰賷賳丕鬲 丕?禺乇賶 毓賱賶 丕賱卮亘賰丞 丕賱賲丨賱賷丞."
+
+#~ msgid ""
+#~ "You will now set up your Internet/network connection. If you wish to\n"
+#~ "connect your computer to the Internet or to a local network, click "
+#~ "\"Next\n"
+#~ "->\". Mandrake Linux will attempt to autodetect network devices and "
+#~ "modems.\n"
+#~ "If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
+#~ "also choose not to configure the network, or to do it later, in which "
+#~ "case\n"
+#~ "clicking the \"Cancel\" button will take you to the next step.\n"
+#~ "\n"
+#~ "When configuring your network, the available connections options are:\n"
+#~ "traditional modem, ISDN modem, ADSL connection, cable modem, and finally "
+#~ "a\n"
+#~ "simple LAN connection (Ethernet).\n"
+#~ "\n"
+#~ "We will not detail each configuration option - just make sure that you "
+#~ "have\n"
+#~ "all the parameters, such as IP address, default gateway, DNS servers, "
+#~ "etc.\n"
+#~ "from your Internet Service Provider or system administrator.\n"
+#~ "\n"
+#~ "You can consult the ``Starter Guide'' chapter about Internet connections\n"
+#~ "for details about the configuration, or simply wait until your system is\n"
+#~ "installed and use the program described there to configure your "
+#~ "connection."
+#~ msgstr ""
+#~ "爻鬲賯賵賲 丕?賳 亘廿毓丿丕丿 賵氐賱丞 丕?賳鬲乇賳鬲/丕賱卮亘賰丞 丕賱禺丕氐丞 亘賰. 丕匕丕 賰賳鬲 鬲乇賷丿\n"
+#~ "鬲賵氐賷賱 噩賴丕夭賰 亘丕?賳鬲乇賳鬲 兀賵 賱賱卮亘賰丞 丕賱賲丨賱賷丞, 丕賳賯乇 \"丕賱鬲丕賱賷 ->\"\n"
+#~ "爻賷丨丕賵賱 Mandrake Linux 兀賳 賷鬲丨賯賯 丌賱賷丕賸 賲賳 賵噩賵丿 丕?噩賴夭丞 賵 丕賱賲賵丿賲丕鬲.\n"
+#~ "丕匕丕 賮卮賱 丕賱鬲丨賯賯, 兀夭賱 丕賱鬲兀卮亘乇 賲賳 \"丕爻鬲禺丿賲 丕賱鬲丨賯賯 丕?賱賷\". 乇亘賲丕 鬲禺鬲丕乇\n"
+#~ "毓丿賲 鬲賴賷卅丞 丕賱卮亘賰丞, 兀賵 鬲乇賷丿 兀賳 鬲賮毓賱 匕賱賰, 賮賷 賴匕賴 丕賱丨丕賱\n"
+#~ "賮廿賳 囟睾胤 夭乇 \"丕賱睾丕亍\" 爻賷兀禺匕賰 丕賱賶 丕賱禺胤賵丞 丕賱鬲丕賱賷丞.\n"
+#~ "\n"
+#~ "兀孬賳丕亍 鬲賴賷卅丞 丕賱卮亘賰丞, 賮廿賳 禺賷丕乇丕鬲 丕賱鬲賵氐賷賱 丕賱賲鬲賵賮乇丞 賴賷:\n"
+#~ "賲賵丿賲 鬲賯賱賷丿賷, 賲賵丿賲 ISDN, 賵氐賱丞 ADSL, 賲賵丿賲 賰賷亘賱, 賵 兀禺賷乇丕賸\n"
+#~ "賵氐賱丞 LAN 亘爻賷胤丞 (丕賷孬乇賳鬲).\n"
+#~ "\n"
+#~ "賱賳 賳匕賰乇 賰賱 禺賷丕乇丕鬲 丕賱鬲賴賷卅丞 亘丕賱鬲賮氐賷賱 - 賮賯胤 鬲兀賰丿 兀賳賴 賱丿賷賰\n"
+#~ "賰賱 丕賱賲毓丕賲賱丕鬲, 賲孬賱 毓賳賵丕賳 IP, 丕賱亘賵丕亘丞 丕?賮鬲乇丕囟賷丞, 禺丕丿賲丕鬲 DNS, 丕賱禺.\n"
+#~ "賲賳 賲賵賮乇 禺丿賲丞 丕?賳鬲乇賳鬲 兀賵 賲丿賷乇 丕賱賳馗丕賲.\n"
+#~ "\n"
+#~ "賷賲賰賳賰 丕賱乇噩賵毓 丕賱賶 丕賱賮氐賱 丕賱禺丕氐 亘廿毓丿丕丿 賵氐賱丞 丕?賳鬲乇賳鬲 賮賷\n"
+#~ "``丿賱賷賱 丕賱賲亘鬲丿卅'' 賱賱鬲賮丕氐賷賱 丨賵賱 丕賱鬲賴賷卅丞, 兀賵 亘亘爻丕胤丞 丕賳鬲馗乇 丨鬲賶 賷鬲賲\n"
+#~ "鬲孬亘賷鬲 丕賱賳馗丕賲 賵 丕爻鬲禺丿賲 丕賱亘乇賳丕賲噩 丕賱賲匕賰賵乇 賴賳丕賰 ?毓丿丕丿 丕賱賵氐賱丞."
+
+#~ msgid "Harddrake2 version "
+#~ msgstr "Harddrake2 丕賱廿氐丿丕乇 "
+
+#~ msgid "Author:"
+#~ msgstr "丕賱賲丐賱賮:"
+
+#~ msgid ""
+#~ "This is HardDrake, a Mandrake hardware configuration tool.\n"
+#~ "Version:"
+#~ msgstr ""
+#~ "賴匕丕 賴賵 HardDrake, 兀丿丕丞 Mandrake 賱鬲賴賷卅丞 丕賱毓鬲丕丿.\n"
+#~ "丕賱廿氐丿丕乇:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "亘乇丕賲噩 鬲丨乇賷乇/鬲卮睾賷賱 丕賱賮賷丿賷賵 賵 丕賱氐賵鬲"
+#~ msgid "Audio station"
+#~ msgstr "賲丨胤丞 賵爻丕卅胤 賲鬲毓丿丿丞"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "賲丨胤丞 兀賱毓丕亘"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "亘乇丕賲噩 鬲丨乇賷乇/鬲卮睾賷賱 丕賱賮賷丿賷賵 賵 丕賱氐賵鬲"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "亘乇丕賲噩 鬲丨乇賷乇/鬲卮睾賷賱 丕賱賮賷丿賷賵 賵 丕賱氐賵鬲"
+#~ msgid "Video station"
+#~ msgstr "賲丨胤丞 兀賱毓丕亘"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "賲丨胤丞 兀賱毓丕亘"
+#~ msgid "Video playing programs"
+#~ msgstr "亘乇丕賲噩 鬲丨乇賷乇/鬲卮睾賷賱 丕賱賮賷丿賷賵 賵 丕賱氐賵鬲"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "亘乇丕賲噩 乇爻賵賲賷丕鬲 賲孬賱 The Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "賲丨胤丞 兀賱毓丕亘"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"賲噩賲賵毓丞 賲賳 丕賱兀丿賵丕鬲 賱賯乇丕亍丞 賵 丕乇爻丕賱 丕賱亘乇賷丿 賵 丕賱兀禺亘丕乇 (pine, mutt, tin..) 賵 "
-"賱鬲氐賮丨 丕賱廿賳鬲乇賳鬲"
+#~ msgid "Graphics programs"
+#~ msgstr "亘乇丕賲噩 乇爻賵賲賷丕鬲 賲孬賱 The Gimp"
#~ msgid "Printer sharing"
#~ msgstr "賲卮丕乇賰丞 丕賱胤丕亘毓丕鬲"
@@ -18974,9 +19511,6 @@ msgstr ""
#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgid "%s"
-#~ msgstr "%s"
-
#~ msgid "Office"
#~ msgstr "兀丿賵丕鬲 丕賱賲賰鬲亘"
@@ -19136,12 +19670,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19245,8 +19777,7 @@ msgstr ""
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -19302,8 +19833,7 @@ msgstr ""
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -19312,7 +19842,7 @@ msgstr ""
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
@@ -19333,7 +19863,7 @@ msgstr ""
#~ "賵 賷毓賷亘賴 丕賱亘胤卅 毓賳丿 丕?爻鬲禺丿丕賲 賲毓 丕賱卮亘賰丕鬲). 賲賳 丕?賮囟賱 兀賳 鬲爻鬲禺丿賲 \"pdq\" 丕匕丕.\n"
#~ "賰丕賳鬲 賴匕賴 鬲噩乇亘鬲賰 丕?賵賱賶 賲毓 賳馗丕賲 賱賷賳賰爻.\n"
#~ "\n"
-#~ " * \"CUPS\" - ``Common UNIX Printing System'', 賴賵 丕賱禺賷丕乇 丕?賲孬賱\n"
+#~ " * \"%s\" - ``Common UNIX Printing System'', 賴賵 丕賱禺賷丕乇 丕?賲孬賱\n"
#~ "賱賱胤亘丕毓丞 毓賱賶 胤丕亘毓鬲賰 丕賱賲丨賱賷丞 兀賵 丨鬲賶 毓賱賶 胤丕亘毓丞 賮賷 丕賱賳氐賮 丕?禺乇 賲賳 丕賱賰賵賰亘. 丕賳賴\n"
#~ "爻賴賱 丕?毓丿丕丿 賵 賷賲賰賳 兀賳 賷鬲氐乇賮 賰禺丕丿賲 兀賵 賰毓賲賷賱 ?賳馗賲丞 胤亘丕毓丞 \"lpd\"\n"
#~ "丕賱賯丿賷賲丞, 賱匕丕 賮廿賳賴 賲鬲賵丕賮賯 賲毓 兀賳馗賲丞 丕賱鬲卮睾賷賱 丕賱賯丿賷賲丞\n"
@@ -19352,7 +19882,7 @@ msgstr ""
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
@@ -19362,7 +19892,7 @@ msgstr ""
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
@@ -19391,7 +19921,7 @@ msgstr ""
#~ "爻賷睾賷乇 賮賯胤 丕毓丿丕丿丕鬲 丕賱賱睾丞 賱賴匕丕 丕賱賲爻鬲禺丿賲 賮賯胤."
#~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"丕賱亘賱丿\": 鬲兀賰丿 賲賳 丕禺鬲賷丕乇 丕賱亘賱丿 丕賱丨丕賱賷. 丕匕丕 賱賲 鬲賰賳 賮賷 賴匕丕\n"
@@ -19809,9 +20339,6 @@ msgstr ""
#~ msgid "Install system updates"
#~ msgstr "鬲孬亘賷鬲 鬲丨丿賷孬丕鬲 丕賱賳馗丕賲"
-#~ msgid "Upgrade"
-#~ msgstr "鬲乇賯賷丞"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "賴賱 鬲乇賷丿 鬲噩乇亘丞 廿毓丿丕丿 胤丕亘毓丞 兀禺乇賶責"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
index 20ae17419..78fa3b460 100644
--- a/perl-install/share/po/az.po
+++ b/perl-install/share/po/az.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2001-09-01 22:26GMT +0200\n"
"Last-Translator: Vasif 陌smay谋lo臒lu MD <azerb_linux@hotmail.com>\n"
"Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
@@ -15,2989 +15,608 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.8\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "L蓹臒v et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Ba臒lama n枚qt蓹l蓹ri 眉莽眉n b枚lm蓹l蓹r daran谋r"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-"Bu paket yenil蓹nm蓹lidir\n"
-"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "X眉susi"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "陌stifad蓹莽i 蓹lav蓹 et"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS ba艧lay谋r"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Daha 脟ox"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "B眉t眉n m枚vcud klaviaturalar谋n siyah谋s谋"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reyunion"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "脰lk蓹:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "陌艧l蓹tdiyiniz dili se莽in"
-
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Unicode by default"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Qurulumdan sonra istifad蓹 ed蓹 bil蓹c蓹yiniz ba艧qa dill蓹r se莽蓹 bil蓹rsiniz"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "陌stifad蓹 etm蓹k ist蓹diyiniz p蓹nc蓹r蓹 idar蓹莽isini se莽in:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "茝sas istifad蓹莽ini se莽in:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "aboot istifad蓹 etm蓹k ist蓹yirsiniz?"
-
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Komp眉terinizi avtomatik olaraq bir istifad蓹莽i il蓹 ba艧lada bil蓹r蓹m.\n"
-"陌st蓹mirsiniz is蓹 r蓹dd edin."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Avtomatik Giri艧"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Qab谋q"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Parol (t蓹krar)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "陌stifad蓹莽i ad谋"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Real name"
-msgstr "H蓹qiqi ad谋"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Accept user"
-msgstr "陌stifad蓹莽ini q蓹bul et"
-
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Done"
-msgstr "Qurtard谋"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifad蓹莽i girin\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "Bu istifad蓹莽i ad谋 art谋q vard谋r"
+msgid "network printer port"
+msgstr "艦蓹b蓹k蓹 脟ap Edicisi (soket) "
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Bu istifad蓹莽i ad谋 art谋q vard谋r"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"陌stifad蓹莽i ad谋nda sadac蓹 ki莽ik h蓹rfl蓹r, r蓹q蓹ml蓹r, `-' v蓹 `_' xarakterl蓹ri "
-"ola bil蓹r"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Xahi艧 edirik bir istifad蓹莽i ad谋 al谋n"
+msgid "Please insert floppy disk:"
+msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Z蓹if parol se莽diniz!"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Parollar uy臒un g蓹lmir"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s art谋q 蓹lav蓹 edilmi艧dir)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Buradak谋 bir birind蓹n f蓹rqli se莽蓹n蓹kl蓹r蓹 yenil蓹rini 蓹lav蓹 ed蓹 bil蓹r,\n"
-"ya da m枚vcud olanlar谋 d蓹yi艧dir蓹 bil蓹rsiniz."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Dig蓹r sisteml蓹r (windows...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Dig蓹r sisteml蓹r (MacOS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Dig蓹r sisteml蓹r (SunOS...)"
+"Yed蓹k b枚lm蓹 c蓹dv蓹li eyni b枚y眉kl眉y蓹 sahib deyil\n"
+"Davam etm蓹k ist蓹yirsiniz?"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linuks"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Which username"
+msgstr "陌stifad蓹莽i ad谋"
#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Ne c眉r bir giri艧 ist蓹yirsiniz?"
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "Bu etiket istifad蓹 edilm蓹z"
-
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Bir swap sah蓹sin蓹 ehtiyac谋n谋z var"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Bo艧 etiket q蓹bul edil蓹 bilm蓹z"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "茝sas"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "NoV陌deo"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd b枚y眉kl眉y眉"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Sonuna 蓹lav蓹 et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "E'tibars谋z"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "C蓹dv蓹l"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "K枚k"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "茝ks"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "茝sas OS"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "OF A莽谋l谋艧谋 F蓹alla艧d谋r谋m?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "CDd蓹n A莽谋l谋艧谋 F蓹alla艧d谋r谋m?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "脟蓹kird蓹k A莽谋l谋艧谋 Vaxt Dolmas谋"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikm蓹sini A莽"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "A莽谋l谋艧 avadanl谋臒谋"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "陌nit 陌smar谋c谋"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "陌stifad蓹 edil蓹c蓹k A莽谋l谋艧 idar蓹cisi"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "Sistem y眉kl蓹yicisi ana se莽蓹n蓹kl蓹ri"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``茝mr s蓹tiri se莽蓹n蓹kl蓹rini m蓹hdudla艧d谋r`` se莽蓹n蓹yi parolsuz bir i艧蓹 yaramaz"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Yadda艧 miqdar谋n谋 Mb cinsind蓹n verin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Bird蓹n art谋q profil蓹 icaz蓹 ver"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "脺mumi yadda艧 miqdar谋 (%d MB tap谋ld谋)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i h蓹r a莽谋l谋艧da t蓹mizl蓹"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "A莽谋l谋艧 disketi yarat"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "m蓹hdudla艧d谋r"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "茝mr s蓹tiri se莽蓹n蓹kl蓹rini m蓹hdudla艧d谋r"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "Restore partition table"
+msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "CDd蓹n A莽谋l谋艧谋 F蓹alla艧d谋r谋m?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "A莽谋l谋艧da gecikm蓹 m眉dd蓹ti"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "b蓹sit"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "B蓹sit"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "A莽谋l谋艧 y眉kl蓹yici qurulu艧u"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "A莽谋l谋艧 qisminin ilk sektoru"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem y眉kl蓹yicisini haraya qurmaq ist蓹yirsiniz?"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS verici IP"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
+msgid "Post-install configuration"
+msgstr "Qurulum sonras谋 qur臒ular"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
+msgid "Use ``%s'' instead"
+msgstr "Yerin蓹 ``%s'' i艧l蓹t"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Skip"
-msgstr "N蓹z蓹r蓹 Alma"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Disket蓹 qeyd et"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "A莽谋l谋艧 qisminin ilk sektoru"
+msgid "Type"
+msgstr "N枚v"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
"\n"
-"On which drive are you booting?"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "A莽谋l谋艧 disketi yarad谋l谋r"
+msgid "Sri Lanka"
+msgstr "艦ri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "A莽谋l谋艧 disketi yaratmaq 眉莽眉n istifad蓹 edil蓹c蓹k disket s眉r眉c眉y眉 se莽in"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "陌kinci disket s眉r眉c眉"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "陌lk disket s眉r眉c眉"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ba臒谋艧lay谋n, disket s眉r眉c眉 yoxdur"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"X眉susi bir a莽谋l谋艧 disketi, Linuks sisteminizin normal bir sistem y眉kl蓹yiciy蓹 "
-"l眉z眉m\n"
-"olmadan a莽谋lmas谋na imkan ver蓹r. 茝g蓹 sisteminiz蓹 lilo (ya da grub) "
-"qurmayacaqsan谋z,\n"
-"ya da ba艧qa bir 蓹m蓹liyyat sistemi liloyu sil蓹rsa ya da lilo "
-"avadanl谋臒谋n谋zlai艧l蓹m蓹zs蓹\n"
-"bu disket siz蓹 yard谋m莽i olacaqd谋r. Sonradan Mandrake qurtarma disketi "
-"r蓹smini\n"
-"istifad蓹 ed蓹r蓹k d蓹 bu disket yarad谋la bil蓹r.\n"
-"A莽谋l谋艧 disketi yaratmaq ist蓹yirsiniz?\n"
-"A莽谋l谋艧 disketi yaratmaq ist蓹yirsinizs蓹, birinci disket s眉r眉c眉y蓹disklet "
-"yerl蓹艧dirin\n"
-"v蓹 \"OLDU\" bas谋n.\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"X眉susi bir a莽谋l谋艧 disketi, Linuks sisteminizin normal bir sistem y眉kl蓹yiciy蓹 "
-"l眉z眉m\n"
-"olmadan a莽谋lmas谋na imkan ver蓹r. 茝g蓹 sisteminiz蓹 lilo (ya da grub) "
-"qurmayacaqsan谋z,\n"
-"ya da ba艧qa bir 蓹m蓹liyyat sistemi liloyu sil蓹rsa ya da lilo "
-"avadanl谋臒谋n谋zlai艧l蓹m蓹zs蓹\n"
-"bu disket siz蓹 yard谋m莽i olacaqd谋r. Sonradan Mandrake qurtarma disketi "
-"r蓹smini\n"
-"istifad蓹 ed蓹r蓹k d蓹 bu disket yarad谋la bil蓹r.\n"
-"A莽谋l谋艧 disketi yaratmaq ist蓹yirsiniz?\n"
-"A莽谋l谋艧 disketi yaratmaq ist蓹yirsinizs蓹, birinci disket s眉r眉c眉y蓹 disket "
-"yerl蓹艧dirin\n"
-"v蓹 \"OLDU\" bas谋n."
-
-#: ../../bootloader.pm:1
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem y眉kl蓹yicisini haraya qurmaq ist蓹yirsiniz?"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "/boot i莽ind蓹 laz谋mi yer yoxdur"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltm蓹k ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile is谋qland谋r谋lm谋s girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos g蓹lmissiniz!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "M蓹tn menyulu LILO"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "SILO"
-msgstr "SILO"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos g蓹lmissiniz!\n"
-"\n"
-"I莽lerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
+"The following printer\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu 蓹ksikdir"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Qurulumdan sonra istifad蓹 ed蓹 bil蓹c蓹yiniz ba艧qa dill蓹r se莽蓹 bil蓹rsiniz"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Art谋q b枚lm蓹 蓹lav蓹 edil蓹 bilm蓹z"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniy蓹 sonra 莽谋x谋lacaq"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "GB"
-msgstr ""
+msgid "Central African Republic"
+msgstr "M蓹rk蓹zi Afrika Respublikas谋"
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Gateway device"
+msgstr "Ke莽it avadanl谋臒谋"
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "KB"
+msgid "Net Method:"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "Birl蓹艧mi艧 艦tatlar"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "serial"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "陌talyanca"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Hollandiya"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "陌sve莽c蓹"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Norve莽c蓹"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Yunanca"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Germany"
-msgstr "Almanca"
+msgid "Ethernetcard"
+msgstr "Eternet Kart谋"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Czech Republic"
-msgstr "脟ex Respublikas谋"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Bel莽ika dili"
+msgid "Parameters"
+msgstr "Parametrl蓹r"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "France"
-msgstr "Frans谋zca"
+msgid "Auto-detect"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Costa Rica"
-msgstr "Kosta Rika"
+msgid "Interface:"
+msgstr "Ara 眉z"
-#: ../../fsedit.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq 眉莽眉n a莽谋lan %s'd蓹 x蓹ta: %s"
+msgid "Select installation class"
+msgstr "Qurulu艧 sinifini se莽in"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerl蓹艧dirm蓹 眉莽眉n bo艧 sah蓹 yoxdur"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s 眉莽眉n LVM M蓹ntiqi Cildini istifad蓹 ed蓹 bilm蓹zsiniz"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+msgid "on CDROM"
msgstr ""
-"Bu ba臒lama n枚qt蓹si 眉莽眉n h蓹qiqi bir fayl sistemin蓹 (ext2, reisrfs)\n"
-"ehtiyac vard谋r.\n"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq k枚k fayl sistemi i莽蓹risind蓹 olmal谋d谋r"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s 眉莽眉n LVM M蓹ntiqi Cildini istifad蓹 ed蓹 bilm蓹zsiniz"
-#: ../../fsedit.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"Bir proqram t蓹'minatl谋 RAID b枚lm蓹sini k枚k qovlu臒u (/) olaraq t蓹'yin "
-"etdiniz.\n"
-"茝g蓹r lilo ya da grub istifad蓹 etm蓹k ist蓹yirsinizs蓹, bir /boot b枚lm蓹si\n"
-"蓹lav蓹 etm蓹yi unutmay谋n"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da ba臒lama n枚qt蓹si %s olan bir b枚lm蓹 var\n"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "脟ap edici ad谋 t蓹kc蓹 h蓹rf, r蓹q蓹m v蓹 alt x蓹tt daxil ed蓹 bil蓹r"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Ba臒lama n枚qt蓹l蓹ri / il蓹 ba艧lamal谋d谋r"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB d蓹n ki莽ik disk b枚lm蓹l蓹rind蓹 ReiserFS istifad蓹 etm蓹lisiniz"
+"Sisteminiz 陌nternet蓹 ba臒l谋 deyil.\n"
+"Ba臒lant谋n谋 yenid蓹n qura艧d谋r谋n"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB d蓹n ki莽ik disk b枚lm蓹l蓹rind蓹 JFS istifad蓹 etm蓹lisiniz"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
"\n"
-"Do you agree to loose all the partitions?\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"B枚lm蓹 c蓹dv蓹linizi oxuya bilmir蓹m, d蓹y蓹s蓹n biraz xarab olub:-(\n"
-"Xarab olmu艧 bolm蓹l蓹ri d眉z蓹ltm蓹y蓹 莽al谋艧acam.\n"
-"Amma b眉t眉n m蓹'lumatlar it蓹c蓹kdir.\n"
-"Ba艧qa bir yol is蓹 DrakXin b枚lm蓹 c蓹dv蓹ll蓹rini yoxlamas谋n谋 "
-"passivl蓹艧dirm蓹kdir.\n"
-"(x蓹ta %s)\n"
-"\n"
-"B眉t眉n b枚lm蓹l蓹ri itirm蓹k ist蓹yirsiniz?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error"
-msgstr "X蓹ta"
+msgid "Belarus"
+msgstr "Belarusiya"
-#: ../../fsedit.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "server"
-msgstr "verici"
+msgid "Error writing to file %s"
+msgstr "%s fayl谋na yazark蓹n x蓹ta oldu"
-#: ../../fsedit.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "with /usr"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
+"apmd batareya v蓹ziyy蓹tini izl蓹m蓹k 眉莽眉n v蓹 syslog arac谋l谋臒谋yla bunun qeydini "
+"tutmaq 眉莽眉n istifad蓹 edilir.\n"
+"Ayr谋ca batareya azald谋臒谋nda sistemi qapatmaq 眉莽眉n d蓹 istifad蓹 edilir."
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "b蓹sit"
-
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "艦蓹kill蓹ndiril蓹n b枚lm蓹: %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayr谋l谋rk蓹n x蓹ta oldu: %s"
+msgid "Use tape to backup"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../fs.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "艦蓹kill蓹ndiril蓹n b枚lm蓹: %s"
+msgid "The following packages are going to be installed"
+msgstr "A艧a臒谋dak谋 paketl蓹r qurulacaqd谋r"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Rezolyusiya: %s\n"
+msgid "CUPS configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../fs.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "艦蓹kill蓹ndiril蓹n b枚lm蓹: %s"
+msgid "Hong Kong"
+msgstr "Honq Konq"
-#: ../../fs.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fayl谋 yarad谋l谋r v蓹 艧蓹kill蓹ndirilir"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Yeni b枚lm蓹l蓹r 眉莽眉n bo艧 sah蓹 yoxdur"
-#: ../../fs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i nec蓹 艧蓹kill蓹ndir蓹c蓹yimi bilmir蓹m (N枚v: %s)"
+msgid "Moving"
+msgstr "Da艧谋n谋r"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s 艧蓹kill蓹ndirilm蓹sind蓹 %s b枚lm蓹 x蓹tas谋"
-
-#: ../../help.pm:1
-#, fuzzy, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"S眉r眉c眉d蓹ki b眉t眉n bilgil蓹ri v蓹 b枚lm蓹l蓹ri silm蓹k 眉莽眉n\n"
-"\"Oldu\" d眉ym蓹sin蓹 bas谋n. Diqq蓹tli olun,\"Oldu\" d眉ym蓹sin蓹 basd谋qdan sonra\n"
-"Windows bilgil蓹ri d蓹 daxil olmaq 眉z蓹r蓹b眉t眉n b枚lm蓹 m蓹'lumat谋 geri d枚nm蓹y蓹c蓹k "
-"艧蓹kild蓹 silin蓹c蓹k.\n"
"\n"
+"Drakbackup activities via %s:\n"
"\n"
-"B枚lm蓹d蓹ki m蓹'lumatlar谋 qoruyaraq \"L蓹臒v et\" d眉ym蓹sin蓹\n"
-"蓹m蓹liyyat谋 l蓹臒v ed蓹 bil蓹rsiniz."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
msgstr ""
-"Linuks Mandrakeni y眉kl蓹mak 眉莽眉n s眉r眉c眉y眉 se莽in.\n"
-"Diqq蓹tli olun, s眉r眉c眉d蓹ki b眉t眉n m蓹'lumatlar silin蓹c蓹k\n"
-"v蓹 geri g蓹lm蓹y蓹c蓹k."
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "("
msgstr ""
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadal谋臒谋 眉莽眉n a莽谋l谋艧 idar蓹cisidir. Ayr谋ca\n"
-"GNU/Linuks, MacOS, v蓹 ya MacOSX sisteml蓹rini komp眉terinizd蓹 varsa, "
-"a莽acaqd谋r.\n"
-"Normalda, bu 蓹m蓹liyyat sisteml蓹ri d眉zg眉n tap谋l谋b qurula bilirl蓹r\n"
-"茝g蓹r bel蓹 olmazsa, bu ekrandan 蓹ll蓹 laz谋mi qur臒ular谋 gir蓹 bil蓹rsiniz.\n"
-"D眉zg眉n parametrl蓹ri girib girm蓹diyinizi yax艧谋ca bir yoxlay谋n.\n"
-"\n"
-"\n"
-"Yaboot ana se莽蓹n蓹kl蓹ri:\n"
-"\n"
-"\n"
-" - Ba艧lan臒谋c 陌smar谋c谋: A莽谋l谋艧dan 蓹vv蓹l 莽谋xan sad蓹 bir ismar谋c.\n"
-"\n"
-"\n"
-" - A莽谋l谋艧 Avadanl谋臒谋: GNU/Linuksu hardan ba艧latmaq ist蓹diyinizi bildirir."
-"脺mumiyy蓹tl蓹 bu m蓹'lumat谋 daha 蓹vv蓹l \"bootstrap\" qura艧d谋r谋lmas谋 "
-"s谋ras谋ndabildirmi艧 olacaqs谋n谋z.\n"
-"\n"
-"\n"
-" - A莽谋q Firmware Gecikm蓹si: LILOdan f蓹rqli olaraq, yabootda iki d蓹n蓹 "
-"gecikm蓹 vard谋r\n"
-"Birinci gecikm蓹 saniy蓹l蓹rl蓹 枚l莽眉l眉r v蓹 bu arada siz\n"
-"CD, OF a莽谋l谋艧谋, MacOS v蓹 ya Linuks aras谋nda se莽ki aparmal谋s谋n谋z.\n"
-"\n"
-"\n"
-" - Kernel A莽谋l谋艧 Vaxt Dolmas谋: Bu vaxt dolmas谋 LILO a莽谋l谋艧 gecikm蓹sin蓹 "
-"uy臒un g蓹lir. Linuksu\n"
-"se莽dikd蓹n sonra ana kernel parametri olaraq bu gecikm蓹 0.1 saniy蓹 olaraq "
-"qurulu olacaqd谋r.\n"
-"\n"
-"\n"
-" - CD A莽谋l谋艧谋 F蓹alla艧s谋nm谋?: Bu se莽蓹n蓹kl蓹 CDd蓹n a莽谋l谋艧谋 timsal ed蓹n 'C' "
-"xarakteri ilk a莽谋l谋艧da 莽谋xacaqd谋r.\n"
-"\n"
-"\n"
-" - OF A莽谋l谋艧谋 F蓹alla艧s谋n?: Bu se莽蓹n蓹kl蓹 OFd蓹n (Open Firmware) a莽谋l谋艧谋n谋 "
-"timsal ed蓹n 'N' xarakteri\n"
-"ilk a莽谋l谋艧da 莽谋xacaqd谋r.\n"
-"\n"
-"\n"
-" - Ana OS: OF gecikm蓹si m眉dd蓹ti doldu臒u vaxt hans谋 OSnin a莽谋laca臒谋n谋 "
-"g枚st蓹rir."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Burada yaboot 眉莽眉n h蓹m ba艧qa 蓹m蓹liyyat sisteml蓹ri, h蓹m alternativ "
-"kernell蓹r,\n"
-" ya da t蓹cili yard谋m a莽谋l谋艧 蓹ksl蓹ri 蓹lav蓹 ed蓹 bil蓹rsiniz.\n"
-"\n"
-"\n"
-"Ba艧qa OSl蓹r 眉莽眉n giri艧in m蓹nas谋 ad v蓹 k枚k 莽谋臒谋r谋ndan ibar蓹tdir.\n"
-"\n"
-"\n"
-"Linuks 眉莽眉n m眉ht蓹m蓹l giri艧l蓹r bunlar ola bil蓹r: \n"
-"\n"
-"\n"
-" - Ad: Bu sad蓹c蓹 olaraq yaboot 眉莽眉n a莽谋lacaq sistemi timsal ed蓹n bir "
-"add谋r.\n"
-"\n"
-"\n"
-" - 茝ks: Bu is蓹 a莽谋lacaq 莽蓹kird蓹yin, y蓹'ni kernelin ad谋d谋r. 脟ox vaxt bu "
-"vmlinux v蓹 ya\n"
-"bunun variasiyalar谋d谋r.\n"
-"\n"
-"\n"
-" - K枚k: Linuks qurulumunun k枚k avadanl谋臒谋 v蓹 ya '/'.\n"
-"\n"
-"\n"
-" \n"
-" - 茝lav蓹: Apple avadanl谋qlar谋nda kernel 蓹lav蓹 se莽蓹n蓹kl蓹ri il蓹 s谋xl谋qla "
-"ba艧lan臒谋c\n"
-"video avadanl谋臒谋 v蓹 ya s谋x s谋x x蓹ta ver蓹n 2ci v蓹 3c眉 si莽an d眉ym蓹l蓹ri 眉莽眉n "
-"emulyasiya\n"
-"imkanlar谋 tan谋na bilir. M蓹s蓹l蓹n bunlar \n"
-"bir ne莽蓹 n眉mun蓹dir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: A莽谋l谋艧 avadanl谋臒谋ndan 蓹vv蓹l b蓹'zi a莽谋l谋艧 modullar谋n谋 se莽m蓹k\n"
-"眉莽眉n i艧l蓹dilir, ya da t蓹cili yard谋m a莽谋l谋艧lar谋nda ramdisk 蓹ksini y眉kl蓹m蓹k "
-"imkan谋 verir.\n"
-"\n"
-"\n"
-" - Initrd-size: Ana ramdisk b枚y眉kl眉y眉 眉mumiyy蓹tl蓹 4096 baytd谋r. 茝g蓹r daha "
-"geni艧 ramdisk bildir蓹\n"
-"bil蓹rsiniz is蓹 bu se莽蓹n蓹yi i艧l蓹din.\n"
-"\n"
-"\n"
-" - Oxuma-yazma: Normalda sistemin 'dirilm蓹sind蓹n' 蓹vv蓹l b蓹'zi s谋naqlar谋n "
-"apar谋la bilm蓹si 眉莽眉n\n"
-"'root' fayl sistemi bu moda soxulur. Bu se莽蓹n蓹yi n蓹z蓹r蓹 almayabil蓹rsiniz.\n"
-"\n"
-"\n"
-" - NoVideo: B蓹lk蓹 Apple video avadanl谋臒谋 problem 莽谋xarda bil蓹r.Onda bu "
-"se莽蓹n蓹kl蓹\n"
-"sistemi 'novideo' modda t蓹bii framebuffer d蓹st蓹yi il蓹 a莽a bil蓹rsiniz.\n"
-"\n"
-"\n"
-" - 茝sas: Bu se莽蓹n蓹kl蓹 Linuks sistemi 蓹sas 蓹m蓹liyyat sistemi hal谋na g蓹tir蓹 "
-"bil蓹rsiniz.\n"
-"Onda ENTER d眉ym蓹sin蓹 basmaqla Linuks sistemi a莽谋lacaqd谋r. Bu giri艧 ayr谋ca "
-"TAB il蓹 a莽谋l谋艧 se莽kil蓹rin蓹 baxd谋臒谋n谋z vaxt \n"
-"'*' i艧ar蓹til蓹 i艧谋qland谋r谋lacaqd谋r."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"Welcome to The Network Configuration Wizard.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"DrakX PCI SCSI adapterleri axtarma臒a c蓹hd ed蓹c蓹k. 茝g蓹 DrakX SCSI\n"
-"taparsa v蓹 hans谋 s眉r眉c眉 i艧l蓹dil蓹c蓹yini bil蓹rs蓹, her 艧ey 枚z 枚z眉n蓹\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"茝g蓹r sisteminizd蓹 SCSI adapteri yoxsa, DrakXin tan谋mayaca臒谋 bir\n"
-"ISA SCSI v蓹 ya PCI SCSI adapteri var is蓹, siz蓹 sisteminizd蓹 SCSI\n"
-"adapteri olub olmad谋臒谋 soru艧ulacaq.\n"
-"茝g蓹r SCSI adapteriniz yox is蓹, \"Yox\" t谋qlay谋n. 茝g蓹r \"Var\"谋 "
-"t谋qlayarsan谋z.\n"
-"qar艧谋n谋za s眉r眉c眉l蓹in siyah谋s谋 莽谋xacaq, oradan siz蓹 uyan谋n谋 se莽蓹rsiniz.\n"
-"\n"
-"\n"
-"茝g蓹r 蓹ll蓹 qurma臒谋 s蓹莽蓹rs蓹niz, o zaman DrakX siz蓹 adapterin x眉susiyy蓹tl蓹rini\n"
-"soru艧acaq. 陌mkan verin ki, DrakX s蓹rb蓹stc蓹 枚z眉 x眉susiyy蓹tl蓹ri taps谋n.\n"
-"脟oxunda bu i艧蓹 yaray谋r.\n"
-"\n"
-"\n"
-"茝g蓹r ist蓹mirs蓹niz is蓹, o zaman adapter 眉莽眉n x眉susiyy蓹tl蓹ri 枚z眉n眉z\n"
-"g枚st蓹rm蓹lisiniz. Bunun 眉莽眉n 陌stifad蓹莽inin 茝l Kitab莽as谋na\n"
-"(ba艧l谋q 3, \"Avadanl谋臒谋n谋z 眉莽眉n kollektiv m蓹'lumat) b枚lm蓹sin蓹\n"
-"bax谋n. Ya da avadanl谋臒谋n谋z谋n 蓹l kitab莽as谋ndan v蓹 ya\n"
-"veb s蓹hif蓹sind蓹n (茝g蓹r internet蓹 莽谋x谋艧谋n谋z var is蓹)\n"
-"ya da Microsoft Windowsdan (茝g蓹r sisteminizd蓹 qurulu is蓹)\n"
-"m蓹'lumat al谋n."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"艦蓹b蓹k蓹 Qura艧d谋rma Sehirbaz谋na Xo莽 G蓹ldiniz\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
+"陌nternet/艦蓹b蓹k蓹 qur臒ular谋n谋z谋 ed蓹c蓹yik.\n"
+"Avtomatik t蓹sbit ist蓹mirsiniz is蓹 i艧ar蓹ti qald谋r谋n.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid ")"
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (Linuks Y眉kl蓹yici) v蓹 Grub a莽谋l谋艧 sistem y眉kl蓹yicil蓹ridir: sistemi "
-"Linuks\n"
-"ya da komp眉terinizd蓹 olan ba艧qa bir 蓹m蓹liyyatiyle a莽a bil蓹rl蓹r.\n"
-"茝sas蓹n bu dig蓹r 蓹m蓹liyyat sisteml蓹ri do臒ru bir 艧蓹kilde t蓹sbit edilib "
-"a莽谋l谋艧a\n"
-"qurula bil蓹rl蓹r. 茝g蓹r bir problem olarsa, buradan 蓹ll蓹 蓹lav蓹 edil蓹 "
-"bil蓹rl蓹r.\n"
-"Parametrl蓹r m枚vzusunda diqq蓹tli olun."
-
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Lebanon"
+msgstr "Livan"
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../help.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Xahi艧 edirik do臒ru qap谋n谋 se莽in. M蓹s蓹l蓹n, MS Windowsdak谋 COM1'in qar艧谋l谋臒谋\n"
-"Linuksda ttyS0'd谋r."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Stop"
+msgstr "Sektor"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s tap谋ld谋"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S眉r眉c眉n眉zd蓹 bir v蓹 ya daha 莽ox Windows b枚lm蓹si tap谋ld谋.\n"
-"Xahi艧 edirik Linuks Mandrakeni qurmaq 眉莽眉n onlardan birini "
-"yenid蓹n枚l莽眉l蓹ndirm蓹k 眉z蓹r蓹 se莽in.\n"
-"\n"
-"\n"
-"X蓹b蓹riniz olsun, her b枚lm蓹 bu c眉r s谋ralan谋b; \"Linuks ad谋\",\"Windows\n"
-"ad谋\"\"H蓹cm\".\n"
-"\n"
-"\"Linuks ad谋\" bu c眉r kodlan谋b: \"s眉r眉c眉 n枚v眉\", \"s眉r眉c眉 n枚mr蓹si\",\"b枚lm蓹 "
-"n枚mr蓹si\" (m蓹s蓹l蓹n, \"hda\").\n"
-"\n"
-"\n"
-"\"S眉r眉c眉 n枚v眉\" s眉r眉c眉n眉z IDE s眉r眉c眉 is蓹 \"hd\"dirSCSI s眉r眉c眉 is蓹\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"S眉r眉c眉 n枚mr蓹si\" h蓹mi艧蓹 \"hd\" v蓹 ya \"sd\"d蓹n sonrak谋 r蓹q蓹mdir.IDE "
-"s眉r眉c眉l蓹r 眉莽眉n:\n"
-"\n"
-"*\"a\" y蓹ni \"birinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
-"\n"
-"*\"b\" y蓹ni \"birinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\",\n"
-"\n"
-"*\"c\" y蓹ni \"ikinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
-"\n"
-"*\"d\" y蓹ni \"ikinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\".\n"
-"\n"
-"\n"
-"SCSI s眉r眉c眉l蓹rind蓹 \"a\" n谋n m蓹nas谋 \"birinci s眉r眉c眉\",\n"
-"\"b\"nin m蓹nas谋 \"ikinci s眉r眉c眉\"d眉r vs..."
+msgid "No CD device defined!"
+msgstr "Fayl se莽"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu n枚qt蓹d蓹 siz Linuks Mandrake y眉kl蓹m蓹k 眉莽眉n b枚lm蓹l蓹ri se莽m蓹lisiniz. 茝g蓹r "
-"蓹vv蓹ld蓹n b枚lm蓹l蓹r var is蓹 (sistemd蓹 蓹vv蓹ll蓹r qurulu olan GNU/Linuks "
-"b枚lm蓹l蓹ri v蓹 ya ba艧qa b枚lm蓹l蓹ndirm蓹 vasit蓹l蓹ri il蓹 haz谋rlad谋臒谋n谋z b枚lm蓹l蓹r), "
-"onlar谋 se莽in v蓹 istifad蓹 edin.\n"
-"Yoxsa onlar谋 bildirm蓹lisiniz.\n"
-"\n"
-"\n"
-"B枚lm蓹l蓹ri yaratmaq 眉莽眉n 蓹vv蓹lci diski se莽m蓹lisiniz.\n"
-"Diski se莽m蓹k 眉莽眉n birinci IDE s眉r眉c眉s眉 眉莽眉n \"hda\" n谋, ikinciyi se莽m蓹k 眉莽眉n "
-"\"hdb\"ni, birinci SCS陌 s眉r眉c眉s眉 眉莽眉n ise \"sda\" vs t谋qlamal谋s谋n谋z.\n"
-"\n"
-"\n"
-"Se莽diyiniz s眉r眉c眉y蓹 a艧a臒谋dak谋lar谋 etm蓹y蓹 qadirsiniz:\n"
-"\n"
-" *Ham谋s谋n谋 t蓹mizl蓹: se莽ili s眉r眉c眉d蓹 b眉t眉n b枚lm蓹l蓹ri sil蓹r.\n"
-"\n"
-"\n"
-" *Avtomatik: S眉r眉c眉n眉zd蓹ki bo艧 sah蓹d蓹 Ext2 v蓹 Swapb枚lm蓹l蓹rini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-" *B枚lm蓹 c蓹dv蓹lini qurtar: Z蓹d蓹l蓹nmi艧 b枚lm蓹 c蓹dv蓹linib蓹rpa ed蓹r. Xahi艧 "
-"edirik\n"
-" diqq蓹tli olun, 莽眉nk眉 bu da iflas ed蓹 bil蓹r.\n"
-"\n"
-"\n"
-" *G蓹ri d枚n: 陌st蓹m蓹diyiniz se莽kil蓹rinizd蓹n geri d枚nd蓹r蓹r.\n"
-"\n"
-"\n"
-" *Yenid蓹n y眉kl蓹: B眉t眉n d蓹yi艧iklikl蓹rinizd蓹n geri d枚n蓹rba艧dak谋 b枚lm蓹 "
-"c蓹dv蓹lin蓹 g蓹l蓹r.\n"
-"\n"
-"\n"
-" *Sehirbaz: B枚lm蓹l蓹ndirm蓹yi bir sehirbaz ed蓹r. T蓹cr眉b蓹sizis蓹niz bunu "
-"se莽in.\n"
-"\n"
-"\n"
-" *Floppy-d蓹n b蓹rpa et: B枚lm蓹 c蓹dv蓹lini 蓹vv蓹ll蓹r flopy-y蓹 qeydetdiniz is蓹, "
-"b枚lm蓹 c蓹dv蓹lini b蓹rpa edin.\n"
-"\n"
-"\n"
-" *Floppy-y蓹 qeyd et: Daha sonradan b蓹rpa etmek 眉莽眉nbilgil蓹ri floppy-y蓹 qeyd "
-"edin.\n"
-" Bu se莽ki 艧idd蓹tl蓹 t枚vsiy蓹 edilir.\n"
-"\n"
-"\n"
-" *Oldu: B枚lm蓹l蓹ndirm蓹 bitdiyind蓹, bunu se莽蓹r蓹kd蓹yi艧iklikl蓹rinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"X蓹b蓹riniz olsun, ist蓹nil蓹n se莽kiy蓹 Tab ve A艧a臒谋/Yuxar谋 oxlar谋n谋 da i艧l蓹d蓹r蓹k "
-"klaviaturadan idar蓹 ed蓹 bil蓹rsiniz.\n"
-"\n"
-"\n"
-"B枚lm蓹 se莽ildiyi zaman bunlar谋 i艧l蓹d蓹 bil蓹rsiniz:\n"
-"\n"
-" *Ctrl-c yeni b枚lm蓹 yaratmaq 眉莽眉n (bo艧 b枚lm蓹 se莽ili oldu臒u zaman)\n"
-"\n"
-" *Ctrl-d b枚lm蓹ni l蓹臒v etm蓹k 眉莽眉n\n"
-"\n"
-" *Ctrl-m ba臒lama n枚qt蓹sini g枚st蓹rm蓹k 眉莽眉n\n"
-"\n"
-"\n"
-"\n"
-"茝g蓹r PPC komp眉terd蓹 qurulum apar谋rs谋n谋zsa, 蓹n az 1 MBl谋q balaca bir HFC "
-"'bootstrap' b枚lm蓹sini yaboot a莽谋l谋艧 y眉kl蓹yicisi 眉莽眉n se莽m蓹k ist蓹y蓹c蓹ksiniz.\n"
-"茝g蓹r daha 莽ox yeriniz varsa ; m蓹s蓹l蓹n 50 MB, onda b眉t眉n kernel v蓹 ramdisk "
-"蓹ksini t蓹cili a莽谋l谋艧 hallar谋 眉莽眉n saxlaya bil蓹rsiniz."
+msgid "Bulgarian (phonetic)"
+msgstr "Ermenic蓹 (fonetik)"
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+msgid "The DHCP start ip"
msgstr ""
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "256 kB"
+msgstr "256 kB"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni yarad谋lan b眉t眉n b枚lm蓹l蓹r 艧蓹kill蓹ndirilm蓹lidir\n"
-"(艧蓹kill蓹ndirm蓹k y蓹ni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan haz谋r b枚lm蓹l蓹ri d蓹 眉st眉nd蓹kil蓹ri silm蓹k 眉莽眉nyenid蓹n "
-"艧蓹kill蓹ndirm蓹k ist蓹ya\n"
-"bil蓹rsiniz.\n"
-"Bunu ist蓹yirsinizs蓹 bu b枚lm蓹l蓹ri d蓹 se莽m蓹lisiniz.\n"
-"\n"
-"\n"
-"Bunu a臒l谋n谋zda tutun ki var olan b眉t眉n b枚lm蓹l蓹ri 艧蓹kill蓹ndirm蓹k\n"
-"m蓹cburi deyil.\n"
-"陌艧l蓹tim sist蓹mini 蓹m蓹l蓹 g蓹tir蓹n b枚lm蓹l蓹ri (y蓹ni\n"
-"\"/\", \"usr\" v蓹 ya \"var\"谋 yenid蓹n 艧蓹kill蓹ndirm蓹k 眉莽眉n\n"
-"se莽蓹 bil蓹rsiniz. Veril蓹r olan \"home\"u m蓹s蓹l蓹 toxunulmadan\n"
-"buraxa bil蓹rsiniz.\n"
-"\n"
-"\n"
-"Diqq蓹tli olun. 艧蓹kill蓹ndirdiyiniz b枚lm蓹l蓹rd蓹ki veril蓹r\n"
-"geri g蓹lm蓹z.\n"
-"\n"
-"\n"
-"艦蓹kill蓹ndirm蓹y蓹 haz谋r is蓹niz \"Oldu\" d眉ym蓹sini t谋qlay谋n.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq 眉莽眉n ba艧qa b枚lm蓹 se莽m蓹k\n"
-"ist蓹yirsiniz is蓹 \"L蓹臒v et\" d眉ym蓹sin蓹 bas谋n."
+#: ../../any.pm:1
+#, c-format
+msgid "Bootloader main options"
+msgstr "Sistem y眉kl蓹yicisi ana se莽蓹n蓹kl蓹ri"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-"Bu n枚qt蓹d蓹 Linuks Mandrakeni sabit diskinizd蓹 haraya quraca臒谋n谋za\n"
-"q蓹rar ver蓹c蓹ksiniz. 茝g蓹r diskiniz bo艧 is蓹 v蓹 ya bir ba艧qa sistem\n"
-"b眉t眉n yeri doldurmu艧 is蓹, o zaman diskinizd蓹 Linuks Mandrake 眉莽眉n\n"
-"yer a莽mal谋s谋n谋z. Ona g枚r蓹 d蓹 diski b枚lm蓹l蓹ndirm蓹lisiniz.\n"
-"B枚lm蓹l蓹ndirm蓹 蓹sas蓹n diskinizd蓹 m蓹ntiqi s眉r眉c眉l蓹r yaratmaqdan ibar蓹tdir.\n"
-"\n"
-"脺mumiyy蓹tl蓹 b枚lm蓹l蓹ndirm蓹nin t蓹siri geri d枚n眉lm蓹zdir.Ona g枚r蓹 d蓹\n"
-"bu i艧 莽ox g蓹rgin v蓹 yorucudur. 茝g蓹r 枚z眉n眉z蓹 inanm谋rs谋n谋z is蓹 bu\n"
-"sehirbaz siz蓹 yard谋m ed蓹r. Ba艧lamadan 蓹vv蓹l xahi艧 edirik 蓹l kitab莽an谋za\n"
-"bax谋n. V蓹 bu i艧 眉莽眉n bir az vaxt ay谋r谋n.\n"
-"\n"
-"\n"
-"Siz蓹 蓹n az 2 b枚lm蓹 laz谋md谋r. Biri sistemin 枚z眉n眉 k枚莽眉rm蓹si 眉莽眉n\n"
-"Dig蓹ri is蓹 uydurma yadda艧 (ya da dig蓹r ad谋 il蓹 Swap) 眉莽眉n.\n"
-"\n"
-"\n"
-"茝g蓹r diskiniz onsuz da b枚l眉nm眉艧 is蓹 (蓹vv蓹lki sistemden ya da\n"
-"ba艧qa b枚lm蓹l蓹ndirm蓹 vasit蓹l蓹ri il蓹 haz谋rlanm谋艧) qurulu艧da\n"
-"sad蓹c蓹 olaraq o yerl蓹ri y眉kl蓹m蓹k 眉莽眉n se莽in.\n"
-"\n"
-"\n"
-"茝g蓹r disk b枚l眉nm蓹mi艧 ise, yuxar谋dak谋 sehirbazdan istifad蓹 ed蓹 bil蓹rsiniz.\n"
-"Sisteminizin qurulu艧undan as谋l谋 olaraq m眉xt蓹lif imkanlar谋n谋z var:\n"
-"\n"
-"* B眉t眉n diski sil: Linuks Mandrake qurmaq 眉莽眉n b眉t眉n diskinizin\n"
-" 眉z蓹rind蓹ki b枚lm蓹l蓹ri sil蓹r. Burada diqq蓹tli olun.\n"
-" Sildikl蓹riniz 蓹sla geri g蓹lm蓹z.\n"
-"\n"
-"\n"
-"* Windows b枚lm蓹sind蓹ki sah蓹ni istifad蓹 et: Sisteminizd蓹\n"
-" Microsoft Windows qurulu is蓹 ve b眉t眉n diski 蓹hat蓹 edir is蓹\n"
-" Linuks Mandrake 眉莽眉n bir yer ay谋rmal谋s谋n谋z. Bunun 眉莽眉n\n"
-" ya b眉t眉n diski silm蓹lisiniz (\"B眉t眉n diski sil\" bax ya da\n"
-" \" Usta modu\" t枚vsiy蓹l蓹ri) ya da yenid蓹n b枚lm蓹l蓹ndirm蓹lisiniz.Bu i艧 he莽 "
-"bir m蓹'lumat itkisi olmadan da edil蓹 bil蓹r.Bunun ba艧qa ad谋\n"
-" eyni komp眉terd蓹 h蓹m Linuks Mandrake h蓹m d蓹 Windows qurulu olmas谋d谋r.\n"
-"\n"
-"\n"
-"t Bu se莽kiy蓹 getm蓹d蓹n 蓹vv蓹l bir 艧eyi ba艧a d眉艧m蓹lisiniz ki, yenid蓹n "
-"b枚lm蓹l蓹ndirm蓹 il蓹 sizin Windows b枚lm蓹si ki莽il蓹c蓹kdir.\n"
-" Y蓹'ni Windows alt谋nda daha az disk sah蓹sin蓹 malik olacaqs谋n谋z.\n"
-"\n"
-"\n"
-"* Usta modu: 茝g蓹r 蓹ll蓹 diski b枚lm蓹k ist蓹s蓹niz, bu modu se莽in. Diqq蓹tli "
-"olun.\n"
-" Bu mod g眉莽l眉d眉r amma bir o q蓹d蓹r d蓹 t蓹hl眉k蓹lidir. Diskinizd蓹ki b眉t眉n "
-"bilgiyi asandl谋qla itir蓹 bil蓹rsiniz.\n"
-" T蓹cr眉b蓹siz is蓹niz bunu se莽m蓹yin."
+msgid "Tape"
+msgstr "N枚v"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Ba臒lant谋n谋z ba艧lad谋l谋r..."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Malaysia"
+msgstr "Malayziya"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
+msgid "Swiss (French layout)"
+msgstr "陌sve莽c蓹 (Frans谋z s谋ras谋)"
-#: ../../help.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid iflas etdi (raidtools 蓹ksik ola bil蓹r mi?)"
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "Webcam"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "size of the (second level) cpu cache"
msgstr ""
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"陌ndi, a莽谋l谋艧da avtomatik olaraq ba艧lamas谋n谋 ist蓹diyiniz xidm蓹tl蓹ri \n"
-"se莽蓹 bil蓹rsiniz. Si莽an bir madd蓹nin 眉z蓹rina g蓹ldiyind蓹 o xidm蓹tin rolunu "
-"a莽谋qlayan\n"
-"ki莽ik bir baloncuq ortaya 莽谋xacaqd谋r.\n"
-"\n"
-"茝g蓹r komp眉terinizi bir verici olaraq istifad蓹 ed蓹c蓹ks蓹niz bu add谋mda tam bir "
-"diqq蓹t ay谋rmal谋s谋n谋z:\n"
-"m眉ht蓹m蓹ldir ki laz谋mi he莽 bir xidm蓹ti ba艧latmaq ist蓹m蓹zsiniz."
+msgid "Soundcard"
+msgstr "S蓹s kart谋"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
+msgid "Level %s\n"
+msgstr "S蓹viyy蓹 %s\n"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Luxembourg"
+msgstr "L眉ksemburq"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
+" DrakBackup Daemon Report\n"
"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxar谋da s眉r眉c眉n眉zd蓹 tap谋lan Linuks b枚lm蓹l蓹ri s谋ralan谋b\n"
-"Sehirbaz谋n t枚vsiy蓹l蓹rin蓹 uyun, onlar 莽ox vaxt i艧蓹 yaray谋r.\n"
-"茝g蓹r bunu ist蓹m蓹s蓹niz en az谋ndan k枚k b枚lm蓹si (\"/\") se莽m蓹lisiniz\n"
-"脟ox ki莽ik b枚lm蓹 se莽m蓹yin. yoxsa 莽ox proqram t蓹'minat谋 y眉kl蓹y蓹 bilm蓹zs蓹niz.\n"
-"茝g蓹r veril蓹rinizi ba艧qa b枚lm蓹d蓹 tutmaq ist蓹yirsinizs蓹, ondabir de \"/home\" "
-"b枚lm蓹si d蓹 yaratmal谋s谋n谋z (bird蓹n 莽ox Linuks\n"
-"b枚lm蓹niz var is蓹).\n"
-"\n"
-"\n"
-"X蓹b蓹riniz olsun, h蓹r b枚lm蓹 a艧a臒谋dak谋 kimi s谋ralan谋b: \"Ad\", \"H蓹cm\".\n"
-"\n"
-"\n"
-"\"Ad\" bel蓹 kodlan谋b: \"s眉r眉c眉 n枚v眉\", \"s眉r眉c眉 m枚mr蓹si\",\n"
-"\"b枚lm蓹 n枚mr蓹si\" (m蓹s蓹l蓹n \"hda1\").\n"
-"\n"
-"\n"
-"\"S眉r眉c眉 n枚v眉\" 蓹g蓹r s眉r眉c眉n眉z IDE s眉r眉c眉d眉rs蓹 \"hd\"dirv蓹 SCSI s眉r眉c眉 is蓹 "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"S眉r眉c眉 n枚mr蓹si\" h蓹mi艧蓹 \"hd\" v蓹 ya \"sd\"d蓹n sonrak谋 r蓹q蓹mdir.IDE "
-"s眉r眉c眉l蓹r 眉莽眉n:\n"
-"\n"
-"*\"a\" y蓹ni \"birinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
-"\n"
-"*\"b\" y蓹ni \"birinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\",\n"
-"\n"
-"*\"c\" y蓹ni \"ikinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
-"\n"
-"*\"d\" y蓹ni \"ikinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\".\n"
-"\n"
-"\n"
-"SCSI s眉r眉c眉l蓹rind蓹 \"a\" n谋n m蓹nas谋 \"birinci s眉r眉c眉\",\n"
-"\"b\"nin m蓹nas谋 \"ikinci s眉r眉c眉\"d眉r vs..."
+msgid "Iran"
+msgstr "陌raq"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "Bus"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+msgid "Iraq"
+msgstr "陌raq"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "%s qu臒usunda d蓹y蓹s蓹n bir LAN 眉nvan 莽ax谋艧mas谋 tap谋ld谋!\n"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+msgid "Configuring..."
+msgstr "Qura艧d谋r谋l谋r..."
-#: ../../install_any.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Qura艧d谋rma art谋q qurtar谋bd谋r v蓹 f蓹aliyy蓹td蓹dir."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Bir x蓹ta oldu. Yeni fayl sisteminin yarad谋laca臒谋 h枚kml眉 bir s眉r眉c眉 "
-"tap谋lmad谋. Bu problemin qayna臒谋 眉莽眉n avadanl谋臒谋n谋z谋 yoxlay谋n"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "%s fayl谋 oxunurkan x蓹ta oldu"
+msgid "Password (again)"
+msgstr "Parol (t蓹krar)"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Search installed fonts"
msgstr ""
-"Bu saxlanm谋艧 paketl蓹r se莽kisini i艧l蓹tm蓹k 眉莽眉n qurulumu ``linux "
-"defcfg=floppy''il蓹 ba艧lad谋n."
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT 艧蓹klind蓹 deyildir"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../install_any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s s眉r眉c眉s眉n蓹 FAT 艧蓹kill蓹ndirilmi艧 bir disket tax谋n"
+msgid "IP address"
+msgstr "IP 眉nvan谋"
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "N陌S domeyni olmadan translasiya i艧l蓹dil蓹 bilm蓹z"
+msgid "Choose the sizes"
+msgstr "B枚y眉kl眉kl蓹rini se莽in"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
+"List of data corrupted:\n"
"\n"
-"Do you really want to remove these packages?\n"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Yes"
-msgstr "B蓹li"
-
-#: ../../install_any.pm:1
-#, fuzzy, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-"bu vericil蓹ri se莽diniz: %s\n"
-"\n"
-"\n"
-"bu vericil蓹r 蓹sas蓹n f蓹alla艧d谋r谋l谋r. Onlar谋n he莽 bir t蓹hl眉k蓹sizlik\n"
-"probleml蓹ri yoxdur, amma b蓹'zi x蓹talar tap谋la bil蓹r. Bel蓹 olsa, m眉m眉k眉n olan "
-"蓹n yax谋n zamanda g眉nc蓹ll蓹m蓹lisiniz.\n"
-"\n"
-"\n"
-"Bu vericil蓹ri qurmaq ist蓹yirsiniz?\n"
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Qura艧d谋rma"
+msgid "Choose another partition"
+msgstr "Yeni b枚lm蓹 yarat"
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO Qurulumu"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "艦蓹b蓹k蓹 f蓹alla艧d谋r谋l谋r"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "B枚lm蓹 c蓹dv蓹li n枚v眉: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX b枚lm蓹 sehirbaz谋 bu yolu tapd谋:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "Art谋q b枚lm蓹 蓹lav蓹 edil蓹 bilm蓹z"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"陌ndi %s sabit diskinizi b枚lm蓹l蓹ndir蓹 bil蓹rsiniz\n"
-"陌艧inizi bitirdiyinizd蓹 `w' il蓹 qeyd etm蓹yi unutmay谋n"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk istifad蓹 et"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Haz谋rk谋 disk b枚lm蓹l蓹ndirm蓹si"
+msgid "Current user"
+msgstr "陌stifad蓹莽ini q蓹bul et"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s b枚l眉m蓹sinin b枚y眉kl眉y眉 d蓹yi艧dirildikd蓹n sonra bu b枚lm蓹d蓹ki b眉t眉n "
-"m蓹'lumatlar silin蓹c蓹kdir"
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
+msgid "Left \"Windows\" key"
msgstr ""
-"Sizin bird蓹n 莽ox diskiniz var, linux qurmaq 眉莽眉n hans谋n谋 istifad蓹 "
-"ed蓹c蓹ksiniz?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Erase entire disk"
-msgstr "B眉t眉n diski sil"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "FAT b枚lm蓹si yoxdur ya da loopback 眉莽眉n laz谋mi yer burax谋lmay谋b"
+msgid "dhcpd Server Configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT b枚y眉kl眉y眉 d蓹yi艧dirilm蓹si bacar谋lmad谋: %s"
+msgid "Guyana"
+msgstr "Quyana"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Fat fayl sistemi uclar谋 hesaplan谋r"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Resizing"
-msgstr "B枚y眉kl眉y眉 d蓹yi艧dirilir"
+msgid "Remove a module"
+msgstr "Modulu 莽谋xart"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "partition %s"
-msgstr "b枚lm蓹 %s"
+msgid "Password"
+msgstr "Parol"
-#: ../../install_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hans谋 sektora da艧谋maq ist蓹yirsiniz?"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"D陌QQ茝T!\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"DrakX \"Windows\" disk b枚lm蓹nizin b枚y眉kl眉y眉n眉 d蓹yi艧dir蓹c蓹k. Bu i艧 \n"
-"tehl眉k蓹li ola bil蓹r. A艧ina deyil is蓹niz qurulumdan 莽谋x谋n v蓹 \"Windows\" \n"
-"alt谋nda \"Scandisk\" (laz谋m g蓹l蓹rs蓹 \"defrag\" da) proqram谋n谋 莽al谋艧d谋r谋n. "
-"Ard谋ndan quruluma \n"
-"davam edin. Veril蓹rinizin yed蓹yini alma臒谋 da unutmay谋n!"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"Sizin Windows b枚l眉m眉 莽ox da臒谋n谋qd谋r. Daxi艧 edirik, 蓹vv蓹lc蓹 birl蓹艧dirin "
-"(defraq)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Windows b枚lm蓹sind蓹ki bo艧 sah蓹ni i艧l蓹t"
+msgid "Advanced Configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Scanning on your HP multi-function device"
msgstr ""
-"FAT t蓹dqiqat莽谋m谋z sizin b枚l眉ml蓹ri i艧l蓹d蓹 bilmir,\n"
-"bu x蓹ta oldu: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hans谋 b枚lm蓹nin b枚y眉kl眉y眉n眉 d蓹yi艧dir蓹c蓹ksiniz?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Windows b枚lm蓹sind蓹ki bo艧 sah蓹ni i艧l蓹t"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "FAT b枚lm蓹si yoxdur ya da loopback 眉莽眉n laz谋mi yer burax谋lmay谋b"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap sah蓹si b枚y眉kl眉y眉 (Mb): "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "K枚k (root) b枚lm蓹si b枚y眉kl眉y眉 (Mb): "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "B枚y眉kl眉kl蓹rini se莽in"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq 眉莽眉n hans谋 disk b枚lm蓹sini istifad蓹 ed蓹c蓹ksiniz?"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback 眉莽眉n Windows b枚lm蓹sini i艧l蓹t"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "B枚lm蓹 c蓹dv蓹li qurtar谋lma臒a 莽al谋艧谋l谋r"
-
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Var olan b枚lm蓹l蓹ri i艧l蓹dimmi"
+msgid "Root"
+msgstr "K枚k"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni b枚lm蓹l蓹r 眉莽眉n bo艧 sah蓹 yoxdur"
+msgid "Choose an existing RAID to add to"
+msgstr "茝lav蓹 etm蓹k 眉莽眉n m枚vcud bir RAID se莽in"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use free space"
-msgstr "Bo艧 sah蓹ni istifad蓹 et"
-
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
-#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sah蓹sin蓹 ehtiyac谋n谋z var"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "T眉rkc蓹 (m眉asir \"Q\" klaviatura)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "Lilo message not found"
msgstr ""
-"Bir swap sah蓹niz yoxdur\n"
-"Davam edim?"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"Bir root disk b枚l眉m眉na ehtiyac谋n谋z var.\n"
-"Bunun 眉莽眉n ist蓹r m枚vcud bir disk b枚l眉m眉 眉z蓹rina t谋qlay谋n, \n"
-"ya da yeni birini ba艧dan yarad谋n. Sonra \"Ba臒lama \n"
-"N枚qt蓹si\"n蓹 g蓹lin va buray谋 '/' olaraq d蓹yi艧dirin."
+"/usr/include/linux/{autoconf,version}.h 眉莽眉n \n"
+"/boot-da avtomatik 莽蓹kird蓹k ba艧l谋臒谋 yarad谋lmas谋."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki b蓹'zi avadanl谋qlar i艧l蓹m蓹si 眉莽眉n d眉zg眉n s眉r眉c眉l蓹r蓹 ehtiyac "
-"duyar.\n"
-"Bunun haqq谋nda %s d蓹/a laz谋mi malumatlar谋 tapa bil蓹rsiniz"
+msgid "if needed"
+msgstr "laz谋m olarsa"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"T蓹brikl蓹r, qurulu艧 bitdi.\n"
-"Cdrom v蓹 disketi 莽谋xartd谋qtan sonra Enter'蓹 basaraq komp眉terinizi \n"
-"yenid蓹n ba艧lad谋n. Linuks Mandrake'nin bu burax谋l谋艧谋ndak谋 yamaqlar haqq谋nda \n"
-"m蓹'lumat almaq 眉莽眉n http://www.mandrakelinux.com 眉nvan谋ndan Errata'ya "
-"bax谋n.\n"
-"Sisteminizin qur臒ular谋 haqq谋nda daha geni艧 bilgiyi Linuks Mandrake \n"
-"陌stifad蓹莽i Kitabc谋臒谋nda tapa bil蓹rsiniz."
+msgid "Restore Failed..."
+msgstr "Fayldan geri 莽a臒谋r"
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Description:\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-"Warning\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a 艧蓹b蓹k蓹. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgstr ""
#: ../../install_messages.pm:1
#, c-format
@@ -3238,3486 +857,5226 @@ msgstr ""
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ba艧lan臒谋c add谋m谋 `%s'\n"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "陌nternet qur臒ular谋"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Help"
-msgstr "Yard谋m"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"ISA kart谋n谋z var is蓹 sonrak谋 ekrandak谋 qiym蓹tl蓹r do臒ru olmal谋d谋r.\n"
+"\n"
+"PCMCIA kart谋n谋z var is蓹 kart谋n谋z谋n irq v蓹 ya io'sunu bilm蓹lisiniz.\n"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "yenid蓹n qura艧d谋r"
+msgid "Do not print any test page"
+msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure"
-msgstr "Qur"
+msgid "Gurmukhi"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Yen蓹 d蓹 davam ed蓹k?"
+msgid "Force No APIC"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Paketl蓹r qurulurk蓹n bir x蓹ta oldu:"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Bu parol 莽ox sad蓹dir (en az %d xarakter boyunda olmal谋d谋r)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Klaviatura"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Paketl蓹ri ist蓹rk蓹n bir x蓹ta oldu:"
+msgid "FTP proxy"
+msgstr "FTP v蓹kil verici"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Sistemi qur"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Fayldan geri 莽a臒谋r"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Show only for the selected day"
+msgstr "T蓹kc蓹 bu g眉n眉nk眉n眉 g枚st蓹r"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu d蓹yi艧dirin!\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
"\n"
-"\"%s\" adl谋 Cd-Romu s眉r眉c眉n眉z蓹 tax谋n v蓹 OLDU'ya bas谋n.\n"
-"茝g蓹r Cd-Rom 蓹linizd蓹 deyils蓹 bu Cd-Rom'dan qurmamaq 眉莽眉n 陌MT陌NA ET'蓹 bas谋n."
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Refuse"
-msgstr "R蓹dd Et"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Accept"
-msgstr "Q蓹bul Et"
+msgid "Logs"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "%d packages"
-msgstr "%d paket"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "茝trafl谋"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind of card do you have?"
+msgstr "Hans谋 n枚v kart谋n谋z var?"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Details"
-msgstr "茝trafl谋"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Xahi艧 edirik g枚zl蓹yin, qurulum haz谋rlan谋r"
+msgid "Security"
+msgstr "T蓹hl眉k蓹sizlik"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Qalan m眉dd蓹t"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Estimating"
-msgstr "T蓹xmini olaraq hesaplan谋r"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "脺mumi"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Qurulur"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq ist蓹diyiniz paketl蓹ri se莽in"
+msgid "Network Configuration"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Qurulumdan 莽谋x"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Paket se莽kil蓹rini saxla"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"B眉t眉n d眉nya \n"
+" D-Channel'l蓹 xaric (kiral谋q x蓹tl蓹r)"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "Disket蓹 qeyd et"
+msgid "Notice"
+msgstr "NoV陌deo"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- 茝vv蓹lki"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Install"
-msgstr "Qurulum"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Avtomatik se莽ili paketl蓹ri g枚st蓹r"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemd蓹n 莽谋xarda bilm蓹zsiniz. Yenil蓹nm蓹lidir"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "N蓹c蓹 b枚lm蓹landirm蓹 ist蓹yirs蓹n?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Bu paket yenil蓹nm蓹lidir\n"
-"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemd蓹n 莽谋xarda bilm蓹zs谋n谋z. Art谋q qurulmu艧dur."
+msgid "Interface"
+msgstr "Ara 眉z"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu laz谋ml谋 bir paketdir, sistemd蓹n 莽谋xard谋la bilm蓹z"
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi se莽蓹 bilm蓹zsiniz/sistemd蓹n 莽谋xarda bilm蓹zs谋n谋z"
+msgid ""
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "B枚lm蓹 艧蓹kill蓹ndirilm蓹si"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "A艧a臒谋dak谋 paketl蓹r sistemd蓹n silin蓹c蓹kl蓹r"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "ismar谋clar"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "A艧a臒谋dak谋 paketl蓹r qurulacaqd谋r"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "Verici"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi se莽蓹 bilm蓹zsiniz, 莽眉nki qurmaq 眉莽眉n yer 莽atm谋r."
+msgid "Mexico"
+msgstr "Meksika"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "艦蓹kill蓹ndirilir"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "茝h蓹miyy蓹t: %s\n"
+msgid "Rwanda"
+msgstr "Rvanda"
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "B枚y眉kl眉y眉: %d KB\n"
+msgid "Do you have any %s interfaces?"
+msgstr "He莽 %s ara 眉z眉 var?"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Burax谋l谋艧: %s\n"
+msgid "Switzerland"
+msgstr "陌sve莽r蓹"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
+msgid "Brunei Darussalam"
+msgstr "Bruney Dar眉ss蓹lim"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bad package"
-msgstr "X蓹tal谋 paket"
+msgid "Remote lpd Printer Options"
+msgstr "Uzaq 脟ap Edici (lpd) Se莽蓹n蓹kl蓹ri"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Other"
-msgstr "Dig蓹r"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "脺mumi b枚y眉kl眉k: %d / %d Mb"
+msgid "Configure Internet Access..."
+msgstr "陌nternet ke莽i艧ini Qur..."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "Norve莽c蓹"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Sonrak谋 ->"
+msgid "Danish"
+msgstr "Danimarka dili"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "F蓹rdi paket se莽kisi"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"A莽谋l谋艧da XFree v蓹 konsolda numlock d眉ym蓹sini\n"
+"avtomatik olaraq a莽."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Paket Qrup Se莽kisi"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr "Xahi艧 edirik bu komp眉ter 眉莽眉n IP qur臒ular谋n谋 girin"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-"Sizin sisteminizin qaynaqlar谋 莽at谋艧m谋r. Qurulum 蓹rzind蓹 problem ya艧aya "
-"bil蓹rsiniz\n"
-"Bu ba艧 ver蓹rs蓹 m蓹tn arac谋l谋臒谋 il蓹 qurulumu s谋namal谋s谋n谋z. Bunun 眉莽眉n "
-"d蓹CDROMdan ba艧latd谋臒谋n谋z zaman,\n"
-" 'F1'蓹 bas谋n v蓹 'text' yazaraq enter'蓹 bas谋n."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Paket se莽kil蓹rini saxla"
+msgid "Processors"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automated"
-msgstr "Avtomatla艧d谋r谋lm谋艧"
+msgid "Bulgaria"
+msgstr "Bolqar谋stan"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Ba臒l谋 deyil"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Replay"
-msgstr "T蓹krarla"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard v蓹 Jan Mayen Adalar谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Avtomatik qurulum disketi haz谋rlanmas谋 se莽il蓹rs蓹,\n"
-"b眉t眉n sabit disk m蓹'lumat谋 daxil edil蓹c蓹kdir!!\n"
-"(y蓹'ni ba艧qa sistemi d蓹 qura bilm蓹k 眉莽眉n).\n"
-"\n"
-"Bu qurulumu takrar etm蓹k ist蓹y蓹 bil蓹rsiniz ax谋.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "K枚k"
+msgid "Backup Other files..."
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"B蓹'zi b枚lm蓹l蓹r bitdi.\n"
-"\n"
-"H蓹qiq蓹t蓹n d蓹 莽谋xmaq ist蓹yirsiniz?"
+msgid "SMB server IP"
+msgstr "SMB verici IP"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s s眉r眉c眉s眉n蓹 bo艧 bir disket yerl蓹艧dirin"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "%s s眉r眉c眉s眉n眉n b枚lm蓹 c蓹dv蓹li disk蓹 yaz谋lacaq!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "%s paketi qurulur"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
msgstr ""
-"Siz Open F陌rmware a莽谋l谋艧 avadanl谋臒谋n谋z谋 a莽谋l谋艧 y眉kl蓹yicisini\n"
-"f蓹alla艧d谋rmaq 眉莽眉n d蓹yi艧dirm蓹li ola bil蓹rsiniz. 茝mr-Se莽蓹n蓹k-O-F d眉ym蓹l蓹rini\n"
-" yenid蓹n ba艧lark蓹n bas谋n v蓹 bunlar谋 girin:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Sonra da bunlar谋 yaz谋n: shut-down\n"
-"Bir sonrak谋 ba艧lan臒谋cda a莽谋l谋艧 y眉kl蓹yicisi s蓹tirini g枚rm蓹lisiniz."
+"X眉susi bir a莽谋l谋艧 disketi, Linuks sisteminizin normal bir sistem y眉kl蓹yiciy蓹 "
+"l眉z眉m\n"
+"olmadan a莽谋lmas谋na imkan ver蓹r. 茝g蓹 sisteminiz蓹 lilo (ya da grub) "
+"qurmayacaqsan谋z,\n"
+"ya da ba艧qa bir 蓹m蓹liyyat sistemi liloyu sil蓹rsa ya da lilo "
+"avadanl谋臒谋n谋zlai艧l蓹m蓹zs蓹\n"
+"bu disket siz蓹 yard谋m莽i olacaqd谋r. Sonradan Mandrake qurtarma disketi "
+"r蓹smini\n"
+"istifad蓹 ed蓹r蓹k d蓹 bu disket yarad谋la bil蓹r.\n"
+"A莽谋l谋艧 disketi yaratmaq ist蓹yirsiniz?\n"
+"A莽谋l谋艧 disketi yaratmaq ist蓹yirsinizs蓹, birinci disket s眉r眉c眉y蓹disklet "
+"yerl蓹艧dirin\n"
+"v蓹 \"OLDU\" bas谋n.\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A莽谋l谋艧 y眉kl蓹yicisi qurulumu iflas etdi. X蓹ta:"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "Sistem y眉kl蓹yicini qur"
+msgid "Latvian"
+msgstr "Yeri"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "monthly"
msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk b枚lm蓹sini yox ets蓹 bel蓹 yen蓹 d蓹 qurulmas谋n谋 ist蓹yirsiniz?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "aboot istifad蓹 etm蓹k ist蓹yirsiniz?"
+msgid "Module name"
+msgstr "Modul ad谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "A莽谋l谋艧da ba艧lad谋l谋r"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Use Incremental Backups"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "A莽谋l谋艧 y眉kl蓹yici haz谋rlan谋r"
+msgid "First sector of drive (MBR)"
+msgstr "Diskin ilk sektoru (MBR)"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid "Joystick"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Sah蓹(domain) ad谋"
+#: ../../lang.pm:1
+#, c-format
+msgid "El Salvador"
+msgstr "Elsalvador"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "NIS sah蓹si"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "Tan谋tma"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "B枚lm蓹 c蓹dv蓹li qurtar谋lma臒a c蓹hd edilir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS Verici"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "T蓹kmill蓹艧dirm蓹 i艧i ba艧laya bilmir !!!\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS sah蓹si"
+msgid "Name: "
+msgstr "Ad: "
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milyon r蓹ng (24 bits)"
+
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "NIS"
+msgid "Allow all users"
+msgstr "陌stifad蓹莽i 蓹lav蓹 et"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "B枚y眉kl眉y眉 d蓹yi艧dirilir"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabel ba臒lant谋s谋"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "NIS"
-msgstr "NIS istifad蓹 et"
+msgid "User"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "Verici"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"B枚lm蓹 c蓹dv蓹linizi oxuya bilmir蓹m, d蓹y蓹s蓹n biraz xarab olub:-(\n"
+"Xarab olmu艧 bolm蓹l蓹ri d眉z蓹ltm蓹y蓹 莽al谋艧acam.\n"
+"Amma b眉t眉n m蓹'lumatlar it蓹c蓹kdir.\n"
+"Ba艧qa bir yol is蓹 DrakXin b枚lm蓹 c蓹dv蓹ll蓹rini yoxlamas谋n谋 "
+"passivl蓹艧dirm蓹kdir.\n"
+"(x蓹ta %s)\n"
+"\n"
+"B眉t眉n b枚lm蓹l蓹ri itirm蓹k ist蓹yirsiniz?\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP Base dn"
+msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "Tan谋tma"
+msgid "Printer on parallel port \\#%s"
+msgstr "脟ap Edici Ev sahibi"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Ad: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "LDAP"
-msgstr ""
+msgid "mkraid failed"
+msgstr "mkraid iflas etdi"
#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 3 Emulation"
+msgstr "D眉ym蓹 3 emulyasiyas谋"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local files"
-msgstr "Yerli 脟ap Edici"
+msgid "Sending files..."
+msgstr "Fayla qeyd et"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Tan谋tma"
+msgid "Israeli (Phonetic)"
+msgstr "陌srail (Fonetik)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Bu parol 莽ox sad蓹dir (en az %d xarakter boyunda olmal谋d谋r)"
+msgid "access to rpm tools"
+msgstr ""
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password"
-msgstr "Parolsuz"
+msgid "edit"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Set root password"
-msgstr "Root parolunu qur"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "脟ap Edici avadanl谋臒谋 URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "Permission problem accessing CD."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Phone number"
+msgstr "Telefon n枚mr蓹si"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Services"
-msgstr "avadanl谋q"
+msgid "Printer name, description, location"
+msgstr "脟ap Edici Ba臒lant谋s谋"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System"
-msgstr "Sistem modu"
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Qap谋"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Use Xinerama extension"
+msgstr "Xinerama ifad蓹l蓹rini i艧l蓹t"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "陌stifad蓹 edil蓹c蓹k A莽谋l谋艧 idar蓹cisi"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "K枚k"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"D眉zg眉n mkbootdisk apar谋la bilmir: \n"
+" %s \n"
+" %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "disabled"
-msgstr "passivl蓹艧dir"
+msgid "West Europe"
+msgstr "Avropa"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "F蓹al"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Verici, Firewall/Ruter"
+msgid "Harddrake2 version %s"
+msgstr "Sabit disk se莽kisi"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "T蓹hl眉k蓹sizlik"
+msgid "Copying %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Security Level"
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+msgid "Choose color"
+msgstr "Monitorunuzu se莽in"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Network"
-msgstr "艦蓹b蓹k蓹 ara 眉z眉"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikan Respublikas谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Svaziland"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "艦蓹b蓹k蓹 ara 眉z眉"
+msgid "Please check if you are using CDRW media"
+msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X il蓹 A莽谋l谋艧"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
+"Linuks Mandrakeni y眉kl蓹mak 眉莽眉n s眉r眉c眉y眉 se莽in.\n"
+"Diqq蓹tli olun, s眉r眉c眉d蓹ki b眉t眉n m蓹'lumatlar silin蓹c蓹k\n"
+"v蓹 geri g蓹lm蓹y蓹c蓹k."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware"
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV kart谋"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "%c ve %c duymeleri ile is谋qland谋r谋lm谋s girisleri sece bilersiniz"
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "S谋ravi 2 D眉ym蓹li Si莽an"
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Remove the logical volumes first\n"
+msgstr "M蓹ntiqi ciltl蓹ri birinci olaraq sil\n"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Ba艧qa var?"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "陌nternet imkan谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Sound card"
-msgstr "S蓹s kart谋"
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No printer"
-msgstr "脟ap Edicisiz"
+msgid "Enabling servers..."
+msgstr "Xidm蓹tl蓹r f蓹alla艧d谋r谋l谋r..."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "脟ap Edici"
+msgid "Printing test page(s)..."
+msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Si莽an"
+msgid "There is already a partition with mount point %s\n"
+msgstr "Onsuz da ba臒lama n枚qt蓹si %s olan bir b枚lm蓹 var\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
+"Bu n枚qt蓹d蓹 Linuks Mandrakeni sabit diskinizd蓹 haraya quraca臒谋n谋za\n"
+"q蓹rar ver蓹c蓹ksiniz. 茝g蓹r diskiniz bo艧 is蓹 v蓹 ya bir ba艧qa sistem\n"
+"b眉t眉n yeri doldurmu艧 is蓹, o zaman diskinizd蓹 Linuks Mandrake 眉莽眉n\n"
+"yer a莽mal谋s谋n谋z. Ona g枚r蓹 d蓹 diski b枚lm蓹l蓹ndirm蓹lisiniz.\n"
+"B枚lm蓹l蓹ndirm蓹 蓹sas蓹n diskinizd蓹 m蓹ntiqi s眉r眉c眉l蓹r yaratmaqdan ibar蓹tdir.\n"
+"\n"
+"脺mumiyy蓹tl蓹 b枚lm蓹l蓹ndirm蓹nin t蓹siri geri d枚n眉lm蓹zdir.Ona g枚r蓹 d蓹\n"
+"bu i艧 莽ox g蓹rgin v蓹 yorucudur. 茝g蓹r 枚z眉n眉z蓹 inanm谋rs谋n谋z is蓹 bu\n"
+"sehirbaz siz蓹 yard谋m ed蓹r. Ba艧lamadan 蓹vv蓹l xahi艧 edirik 蓹l kitab莽an谋za\n"
+"bax谋n. V蓹 bu i艧 眉莽眉n bir az vaxt ay谋r谋n.\n"
+"\n"
+"\n"
+"Siz蓹 蓹n az 2 b枚lm蓹 laz谋md谋r. Biri sistemin 枚z眉n眉 k枚莽眉rm蓹si 眉莽眉n\n"
+"Dig蓹ri is蓹 uydurma yadda艧 (ya da dig蓹r ad谋 il蓹 Swap) 眉莽眉n.\n"
+"\n"
+"\n"
+"茝g蓹r diskiniz onsuz da b枚l眉nm眉艧 is蓹 (蓹vv蓹lki sistemden ya da\n"
+"ba艧qa b枚lm蓹l蓹ndirm蓹 vasit蓹l蓹ri il蓹 haz谋rlanm谋艧) qurulu艧da\n"
+"sad蓹c蓹 olaraq o yerl蓹ri y眉kl蓹m蓹k 眉莽眉n se莽in.\n"
+"\n"
+"\n"
+"茝g蓹r disk b枚l眉nm蓹mi艧 ise, yuxar谋dak谋 sehirbazdan istifad蓹 ed蓹 bil蓹rsiniz.\n"
+"Sisteminizin qurulu艧undan as谋l谋 olaraq m眉xt蓹lif imkanlar谋n谋z var:\n"
+"\n"
+"* B眉t眉n diski sil: Linuks Mandrake qurmaq 眉莽眉n b眉t眉n diskinizin\n"
+" 眉z蓹rind蓹ki b枚lm蓹l蓹ri sil蓹r. Burada diqq蓹tli olun.\n"
+" Sildikl蓹riniz 蓹sla geri g蓹lm蓹z.\n"
+"\n"
+"\n"
+"* Windows b枚lm蓹sind蓹ki sah蓹ni istifad蓹 et: Sisteminizd蓹\n"
+" Microsoft Windows qurulu is蓹 ve b眉t眉n diski 蓹hat蓹 edir is蓹\n"
+" Linuks Mandrake 眉莽眉n bir yer ay谋rmal谋s谋n谋z. Bunun 眉莽眉n\n"
+" ya b眉t眉n diski silm蓹lisiniz (\"B眉t眉n diski sil\" bax ya da\n"
+" \" Usta modu\" t枚vsiy蓹l蓹ri) ya da yenid蓹n b枚lm蓹l蓹ndirm蓹lisiniz.Bu i艧 he莽 "
+"bir m蓹'lumat itkisi olmadan da edil蓹 bil蓹r.Bunun ba艧qa ad谋\n"
+" eyni komp眉terd蓹 h蓹m Linuks Mandrake h蓹m d蓹 Windows qurulu olmas谋d谋r.\n"
+"\n"
+"\n"
+"t Bu se莽kiy蓹 getm蓹d蓹n 蓹vv蓹l bir 艧eyi ba艧a d眉艧m蓹lisiniz ki, yenid蓹n "
+"b枚lm蓹l蓹ndirm蓹 il蓹 sizin Windows b枚lm蓹si ki莽il蓹c蓹kdir.\n"
+" Y蓹'ni Windows alt谋nda daha az disk sah蓹sin蓹 malik olacaqs谋n谋z.\n"
+"\n"
+"\n"
+"* Usta modu: 茝g蓹r 蓹ll蓹 diski b枚lm蓹k ist蓹s蓹niz, bu modu se莽in. Diqq蓹tli "
+"olun.\n"
+" Bu mod g眉莽l眉d眉r amma bir o q蓹d蓹r d蓹 t蓹hl眉k蓹lidir. Diskinizd蓹ki b眉t眉n "
+"bilgiyi asandl谋qla itir蓹 bil蓹rsiniz.\n"
+" T蓹cr眉b蓹siz is蓹niz bunu se莽m蓹yin."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
+msgid "Ukraine"
+msgstr "Ukrayna"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Tan谋tma"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Klaviatura"
+msgid "External ISDN modem"
+msgstr "Xarici ISDN kart"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Summary"
-msgstr "M眉nd蓹ricat"
+msgid "if set to yes, report check result by mail."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Se莽kiniz? (蓹sas %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS Verici"
+msgid " / Region"
+msgstr "Reyunion"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Avadanl谋q saat谋n谋z GMT-y蓹 g枚ra quruludur mu?"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"S谋naq s蓹hif蓹si 莽ap edici vasit蓹sin蓹 g枚nd蓹rildi.\n"
+"脟ap edicinin i艧l蓹m蓹si 眉莽眉n bir az vaxt ke莽蓹r.\n"
+"脟ap v蓹ziyy蓹ti:\n"
+"%s\n"
+"\n"
+"D眉z m眉 i艧l蓹yir?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hans谋 m蓹qs蓹dl蓹 istifad蓹 edil蓹c蓹k?"
+msgid "daily"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Bir 莽ap edici qurmaq ist蓹yirsiniz?"
+msgid "and one unknown printer"
+msgstr "脟ap Edicisiz"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Fork edil蓹 bilmir: %s"
+msgid "Ireland"
+msgstr "陌zlandiya dili"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "茝ks 眉nvan谋na ba臒lant谋 qurulur"
+msgid "kernel version"
+msgstr "莽蓹yird蓹k burax谋l谋艧谋"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq 眉莽眉n bir 蓹ks 眉nvan谋 se莽in"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "茝ks 眉nvan谋na ba臒lant谋 qurulur"
+msgid "Is this the correct setting?"
+msgstr "Do臒rudur?"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
"\n"
-"Do you want to install the updates ?"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s s眉r眉c眉s眉n蓹 bo艧 bir disket yerl蓹艧dirin"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
+msgid "Wizard Configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Qurulum sonras谋 qur臒ular"
+msgid "Autoprobe"
+msgstr "Avtomatik yoxla"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
+msgid "Backup system files..."
msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Qurulum haz谋rlan谋r"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "N陌S domeyni olmadan translasiya i艧l蓹dil蓹 bilm蓹z"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adl谋 Cd-Rom"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
msgstr ""
-"A艧a臒谋dak谋 siyah谋dak谋 b眉t眉n CD'l蓹r蓹 sahib is蓹niz, OLDU'ya bas谋n.\n"
-"CD'l蓹rin he莽 birin蓹 sahib deyils蓹niz, 陌MT陌NA ET'蓹 bas谋n.\n"
-"CD'l蓹rd蓹n b蓹'zil蓹i 蓹ksik is蓹, onlar谋 se莽ili v蓹ziyy蓹td蓹n 莽谋xard谋b OLDU'ya "
-"bas谋n."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All"
-msgstr "Ham谋s谋"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Si莽an avadanl谋臒谋: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "\"Windows\"u sil"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "With X"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
+"X Font Vericisini a莽谋l谋艧da i艧蓹 salar (Bu, XFree icras谋 眉莽眉n m蓹cburidir)."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Type of install"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Se莽ili b枚y眉kl眉k var olandan daha b枚y眉kd眉r"
+msgid "Madagascar"
+msgstr "Madaqaskar"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Urpmi"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Cron not available yet as non-root"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "Disketd蓹n geri 莽a臒谋r"
+msgid "System"
+msgstr "Sistem modu"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Package selection"
-msgstr "Paket Qrup Se莽kisi"
+msgid "Do you want to use this feature?"
+msgstr "aboot istifad蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Disket蓹 qeyd et"
+msgid "Arabic"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "Disketd蓹n geri 莽a臒谋r"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
+"\n"
+"- Options:\n"
+msgstr "Se莽蓹n蓹kl蓹r"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Parol"
+
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "%d minutes"
msgstr ""
-"Sisteminizd蓹 qurulum ya da g眉nc蓹ll蓹m蓹 眉莽眉n laz谋mi bo艧 yer yoxdur(%d > %d)"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "M枚vcud olan paketl蓹r axtar谋l谋r."
+msgid "Graphics card: %s"
+msgstr "Ekran kart谋: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "G眉nc蓹ll蓹n蓹c蓹k paketlar tap谋l谋r"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Bu paketi sistemd蓹n 莽谋xarda bilm蓹zs谋n谋z. Art谋q qurulmu艧dur."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree configuration"
+msgstr "XFree qura艧d谋r谋lmas谋"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "M枚vcud olan paketl蓹r axtar谋l谋r."
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Choose action"
+msgstr "Monitorunuzu se莽in"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Qurulumu bitirm蓹k 眉莽眉n laz谋mi sah蓹 yoxdur, xahi艧 edirik 蓹lav蓹 edin"
+msgid "French Polynesia"
+msgstr "Frans谋z Poloneziyas谋"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "X蓹tal谋 bloklar s谋nans谋nm谋?"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "OKI 4w v蓹 uy臒un Windows 莽ap edicil蓹rini d蓹st蓹kl蓹."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "艦蓹kill蓹ndiril蓹c蓹k disk b枚lm蓹l蓹rini se莽in"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "ALSA s蓹s sistemini (Advanced Linux Sound Architecture) ba艧lat"
-#: ../../install_steps_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"B枚lm蓹 c蓹v蓹lind蓹ki d蓹yi艧iklikl蓹rin daxil olmas谋 眉莽眉n komp眉terinizi yenid蓹n "
-"ba艧latmal谋s谋n谋z."
+msgid "Installing driver for %s card %s"
+msgstr "%s kart谋 (%s) 眉莽眉n s眉r眉c眉 y眉kl蓹nir"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Ba臒lama n枚qt蓹l蓹rini se莽in"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Databeyz"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Ba臒lama n枚qt蓹l蓹ri 眉莽眉n b枚lm蓹l蓹r daran谋r"
+msgid "Ukrainian"
+msgstr "Ukrayna dili"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No partition available"
-msgstr "uy臒un b枚lm蓹 tap谋lmad谋"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDE qap谋lar谋 qurulur"
+#, fuzzy, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "\"Windows\"u sil"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "D眉ym蓹 3 emulyasiyas谋"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "D眉ym蓹 2 emulyasiyas谋"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"LILO (Linuks Y眉kl蓹yici) v蓹 Grub a莽谋l谋艧 sistem y眉kl蓹yicil蓹ridir: sistemi "
+"Linuks\n"
+"ya da komp眉terinizd蓹 olan ba艧qa bir 蓹m蓹liyyatiyle a莽a bil蓹rl蓹r.\n"
+"茝sas蓹n bu dig蓹r 蓹m蓹liyyat sisteml蓹ri do臒ru bir 艧蓹kilde t蓹sbit edilib "
+"a莽谋l谋艧a\n"
+"qurula bil蓹rl蓹r. 茝g蓹r bir problem olarsa, buradan 蓹ll蓹 蓹lav蓹 edil蓹 "
+"bil蓹rl蓹r.\n"
+"Parametrl蓹r m枚vzusunda diqq蓹tli olun."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Buttons emulation"
-msgstr "D眉ym蓹 emulyasiyas谋"
+msgid "System mode"
+msgstr "Sistem modu"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"NetWare 莽ap edicid蓹n yekun almaq 眉莽眉n, NetWare vericisinin ad谋 v蓹 莽ap "
+"edici \n"
+"n枚vb蓹si ad谋 il蓹 istifad蓹莽i ad谋 va parolu verilm蓹lidir."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmask"
+
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Si莽an谋n谋z谋n ba臒l谋 oldu臒u serial Qap谋y谋 se莽in."
+msgid "Append"
+msgstr "Sonuna 蓹lav蓹 et"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Si莽an Qap谋s谋"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Parollar uy臒un g蓹lmir"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "G眉nc蓹ll蓹m蓹"
+#, c-format
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"Avtomatik qurulum disketi haz谋rlanmas谋 se莽il蓹rs蓹,\n"
+"b眉t眉n sabit disk m蓹'lumat谋 daxil edil蓹c蓹kdir!!\n"
+"(y蓹'ni ba艧qa sistemi d蓹 qura bilm蓹k 眉莽眉n).\n"
+"\n"
+"Bu qurulumu takrar etm蓹k ist蓹y蓹 bil蓹rsiniz ax谋.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Bu bir qurulum mu, yoxsa g眉nc蓹ll蓹m蓹midir?"
+msgid "Network printer \"%s\", port %s"
+msgstr "艦蓹b蓹k蓹 脟ap Edicisi (soket) "
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Qurulum/G眉nc蓹ll蓹m蓹"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Sizi Yerli 艦蓹b蓹k蓹y蓹 ba臒layacaq adapteri se莽in"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "B眉t眉n m枚vcud klaviaturalar谋n siyah谋s谋"
+msgid "OK to restore the other files."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Please choose your keyboard layout."
msgstr "Klaviatura qurulu艧unu se莽iniz."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit"
-msgstr "脟谋x"
+msgid "Printer Device URI"
+msgstr "脟ap Edici avadanl谋臒谋 URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "License agreement"
-msgstr "Lisenziya s枚zl蓹艧m蓹si"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "An error occurred"
-msgstr "Bir x蓹ta oldu"
+msgid "Terminal-based"
+msgstr "Terminal 蓹sasl谋"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Installing a printing system in the %s security level"
msgstr ""
-" <Tab>/<Alt-Tab> ir蓹li/geri | <Bo艧luq> i艧ar蓹tl蓹 | <F12> sonrak谋 ekran"
-#: ../../install_steps_newt.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Bu istifad蓹莽i ad谋 art谋q vard谋r"
+
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
+msgid "Other OS (windows...)"
+msgstr "Dig蓹r sisteml蓹r (windows...)"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Disket s眉r眉c眉 yoxdur"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sistemin蓹 Xo艧g蓹lmi艧siniz"
+msgid "Generate auto install floppy"
+msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"B蓹zi paketl蓹r do臒ru olaraq qurulumu bitirm蓹di.\n"
-"cdrom s眉r眉c眉n眉z ya da cdromunuz d眉zg眉n i艧l蓹mir.\n"
-"茝vv蓹ld蓹n Linuks qurulu bir sistemd蓹 \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifad蓹 ed蓹r蓹k Cd-Rom'u yoxlay谋n.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s ba臒lama n枚qt蓹sini 莽oxalt"
+msgid "Somalia"
+msgstr "Somali"
-#: ../../install_steps.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
+msgid "No open source driver"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Bir x蓹ta oldu, f蓹q蓹t nec蓹 d眉z蓹ldil蓹c蓹yini bilmir蓹m.\n"
-"Davam edin, riski siz蓹 aitdir!"
+"Biz d枚rd眉nc眉 s蓹viyy蓹 haqlar谋n谋 verdik v蓹 sistem xarici ba臒lant谋lara qar艧谋 "
+"tamamil蓹 qapal谋d谋r.\n"
+"T蓹hl眉k蓹sizlik s蓹viyy蓹si indi 蓹n 眉std蓹dir."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Xahi艧 edirik g枚zl蓹yin"
+msgid "Nicaragua"
+msgstr "Nikaraqua"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Oldu"
+msgid "New Caledonia"
+msgstr "Yeni Kaledoniya"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Qurtar"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Avropa (EDSS1)"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Basic"
-msgstr ""
+msgid "Video mode"
+msgstr "Ekran modu"
-#: ../../interactive.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Advanced"
-msgstr "茝trafl谋"
+msgid "Oman"
+msgstr "Oman"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Uzaq 脟ap Edici"
+msgid "Network Monitoring"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Modify"
-msgstr "T蓹kmill蓹艧dir"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "New size in MB: "
+msgstr "MB cinsind蓹n b枚y眉kl眉k: "
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add"
-msgstr "茝lav蓹 et"
+msgid "Partition table type: %s\n"
+msgstr "B枚lm蓹 c蓹dv蓹li n枚v眉: %s\n"
-#: ../../interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "Monitorunuzu se莽in"
+msgid "Authentication Windows Domain"
+msgstr "Tan谋tma"
#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
+msgid "US keyboard"
+msgstr "Amerikan (US) klaviaturas谋"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr ""
+msgid "Buttons emulation"
+msgstr "D眉ym蓹 emulyasiyas谋"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Left \"Windows\" key"
+msgid ", network printer \"%s\", port %s"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "\"Menu\" key"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Fayla qeyd et"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "Halt bug"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+
+#: ../../lang.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "Tokelau"
+msgstr "Tokelo"
#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estoniya dili"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Xahi艧 edirik g枚zl蓹yin"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection speed"
+msgstr "Ba臒lant谋 n枚v眉:"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "Namibia"
+msgstr "Namibiya"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Databeyz"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Right Alt key"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "艦蓹kill蓹ndirilmi艧 RAID md%d-y蓹 disk b枚lm蓹si 蓹lav蓹 edil蓹 bilinm蓹di"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Sizin kart谋n谋z谋n 3D s眉r'蓹tl蓹ndirm蓹 d蓹st蓹yi ola bil蓹r, amma sadec蓹 olaraq "
+"XFree %s\n"
+"il蓹 d眉zg眉n i艧l蓹y蓹r.\n"
+"D陌QQ茝T! BU SINAQ M茝RH茝L茝SIND茝DIR V茝 KOMP脺TER陌N陌Z DONDURA BIL茝R.\n"
+"Sizin kart谋n谋za XFree %s t蓹r蓹find蓹n d蓹st蓹k verilir ve bu 2D 眉莽眉n daha yax艧谋 "
+"bir se莽ki olar."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (lat谋n/kiril)"
+msgid "Please wait, setting security options..."
+msgstr "Xahi艧 edirik g枚zl蓹yin, qurulum haz谋rlan谋r"
-#: ../../keyboard.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturas谋 (beyn蓹lmil蓹l)"
+msgid "Launch the graphical environment when your system starts"
+msgstr "A莽谋l谋艧da X-Window sistemini ba艧lat"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturas谋"
+msgid "hourly"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "UK keyboard"
-msgstr "陌ngiliz (UK) klaviaturas谋"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "T眉rkc蓹 (m眉asir \"Q\" klaviatura)"
+msgid "Antigua and Barbuda"
+msgstr "Antiq v蓹 Barbuda"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "T眉rkc蓹 (蓹n蓹n蓹vi \"F\" klaviatura)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
#: ../../keyboard.pm:1
+#, c-format
+msgid "Spanish"
+msgstr "陌spanca"
+
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
+msgid "Start"
+msgstr "Hal:"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Ermenic蓹 (yaz谋 ma艧谋n谋)"
+msgid "Configuring applications..."
+msgstr "脟ap Edicini Qur"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "Normal modem t蓹sbiti"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Az蓹rbaycanca (kiril)"
+msgid "File Selection"
+msgstr "Paket Qrup Se莽kisi"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
+msgid "CUPS"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovenc蓹"
+msgid "Run config tool"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swedish"
-msgstr "陌sve莽c蓹"
+msgid "Bootloader installation"
+msgstr "A莽谋l谋艧 y眉kl蓹yici qurulu艧u"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
+msgid "Root partition size in MB: "
+msgstr "K枚k (root) b枚lm蓹si b枚y眉kl眉y眉 (Mb): "
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rusca"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Bu laz谋ml谋 bir paketdir, sistemd蓹n 莽谋xard谋la bilm蓹z"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) verici adlar谋n谋 IP 眉nvanlar谋na 莽evir蓹n\n"
+"Sah蓹 Ad谋 Vericisidir(DNS)."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Frans谋zca (Kanada/Quebec)"
+msgid "Disconnect..."
+msgstr "Ba臒lant谋n谋 K蓹s..."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portuqalca"
+msgid "Saint Lucia"
+msgstr "M眉q蓹dd蓹s Lusiya"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "Qap谋"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ s谋ras谋)"
+msgid "Palau"
+msgstr "Palau"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY s谋ras谋)"
+msgid "level"
+msgstr "s蓹viyy蓹"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Norwegian"
-msgstr "Norve莽c蓹"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Hollandiya dili"
+msgid "Package Group Selection"
+msgstr "Paket Qrup Se莽kisi"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Maltese (US)"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid "You can configure each parameter of the module here."
msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Az蓹rbaycanca (kiril)"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Choose the resolution and the color depth"
+msgstr "Rezolyusiya v蓹 r蓹ng d蓹rinliyini se莽in"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Myanmar (Burmese)"
+msgid "Emulate third button?"
+msgstr "3 d眉ym蓹 emulasiyas谋"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedoniya dili"
+msgid "Mount"
+msgstr "Ba臒la"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Sistemi qur"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Malayalam"
+msgid "text box height"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "Yeri"
+msgid "State"
+msgstr "Hal:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
+msgid "Be sure a media is present for the device %s"
+msgstr "%s avadanl谋臒谋nda medya oldu臒undan 蓹min olun"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
+msgid "Enable multiple profiles"
+msgstr "Bird蓹n art谋q profil蓹 icaz蓹 ver"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (k枚hn蓹)"
+msgid "Local printer"
+msgstr "Yerli 脟ap Edici"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "Yeri"
+msgid "Package selection"
+msgstr "Paket Qrup Se莽kisi"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Lat谋n Amerika dili"
+msgid "Mauritania"
+msgstr "Mavritaniya"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturas谋"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 d眉ym蓹li"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr ""
+msgid "All primary partitions are used"
+msgstr "B眉t眉n birinci b枚lm蓹l蓹r istifad蓹d蓹dir"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Italian"
-msgstr "陌talyanca"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Bu edildikd蓹n sonra Xd蓹n 莽谋xma臒谋n谋z谋 t枚vsiyy蓹 edirik, yoxsa\n"
+"verici ad谋 x蓹sar蓹tl蓹ri meydana g蓹l蓹 bil蓹r."
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "陌zlandiya dili"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Texniki avadanl谋臒谋n a莽谋l谋艧da avtomatik t蓹sbiti v蓹 qurulmas谋."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Farsca"
+msgid "Configuring IDE"
+msgstr "IDE qap谋lar谋 qurulur"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Monitor qurulmay谋b"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Si莽an qur臒ular谋"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "陌srail (Fonetik)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokos Adas谋"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "陌nternet蓹 ba臒lan"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israeli"
-msgstr "陌srail"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Yeni qur臒ular谋n f蓹alla艧ma臒谋 眉莽眉n sistemi yenid蓹n ba艧latmal谋s谋n谋z"
-#: ../../keyboard.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Croatian"
-msgstr "X谋rvatca"
+msgid "Provider phone number"
+msgstr "陌XM telefon n枚mr蓹si"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Ev sahibi ad谋"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Macarca"
+msgid "Armenia"
+msgstr "Erm蓹nistan"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr ""
+msgid "Fiji"
+msgstr "Fici"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greek"
-msgstr "Yunanca"
+msgid "Second floppy drive"
+msgstr "陌kinci disket s眉r眉c眉"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "G眉rc眉 dili (\"Lat谋n\" s谋ras谋)"
+msgid "About Harddrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "G眉rc眉 dili (\"Rus\" s谋ras谋)"
+msgid "Drive capacity"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "French"
-msgstr "Frans谋zca"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Disket s眉r眉c眉y蓹 bir disket yerl蓹艧dirin\n"
+"Bu disketd蓹ki b眉t眉n m蓹'lumatlar yox olacaqd谋r"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finc蓹"
+msgid "Size: %s"
+msgstr "B枚y眉kl眉y眉: %s"
#: ../../keyboard.pm:1
#, c-format
-msgid "Spanish"
-msgstr "陌spanca"
+msgid "Control and Shift keys simultaneously"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Estonian"
-msgstr "Estoniya dili"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d saniy蓹 sonra 莽谋x谋lacaq"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "View Backup Configuration."
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve莽c蓹)"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../keyboard.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "No password"
+msgstr "Parolsuz"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danimarka dili"
+msgid "Nigeria"
+msgstr "Nigeriya"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Devanagari"
+msgid "There is no existing partition to use"
+msgstr "B枚lm蓹 c蓹dv蓹li qurtar谋lma臒a 莽al谋艧谋l谋r"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"Soket 莽ap edicid蓹n yekun almaq 眉莽眉n, 莽ap edicinin ev sahibi ad谋n谋 ve "
+"m眉mk眉ns蓹, qap谋s谋n谋n n枚mr蓹sini verm蓹lisiniz."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Almanca (枚l眉 d眉ym蓹l蓹r olmas谋n)"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hard drive information"
+msgstr "Sabit disk se莽kisi"
#: ../../keyboard.pm:1
#, c-format
-msgid "German"
-msgstr "Almanca"
+msgid "Russian"
+msgstr "Rusca"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "脟ex dili (QWERTY)"
+msgid "Jordan"
+msgstr "陌ordaniya"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid iflas etdi"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Uzaq 脟ap Edici"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "脟ex dili (QWERTZ)"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "陌sve莽c蓹 (Frans谋z s谋ras谋)"
+msgid "Sorry, no floppy drive available"
+msgstr "Ba臒谋艧lay谋n, disket s眉r眉c眉 yoxdur"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "陌sve莽c蓹 (Alman s谋ras谋)"
+msgid "Bolivia"
+msgstr "Boliviya"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarusca"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estoniya dili"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Bad package"
+msgstr "X蓹tal谋 paket"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulqarca"
+msgid "DrakSec Basic Options"
+msgstr "Se莽蓹n蓹kl蓹r"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Ermenic蓹 (fonetik)"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Romania"
+msgstr "Rumin谋ya"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "f蓹alla艧d谋r"
+msgid "choose device"
+msgstr "A莽谋l谋艧 avadanl谋臒谋"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Bel莽ika dili"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Az蓹rbaycanca (lat谋n)"
+msgid "Remove from LVM"
+msgstr "LVMd蓹n ay谋r"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr ""
+msgid "Timezone"
+msgstr "Vaxt Dilimi"
#: ../../keyboard.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Ermenic蓹 (fonetik)"
+msgid "German"
+msgstr "Almanca"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Ermenic蓹 (yaz谋 ma艧谋n谋)"
+msgid "Next ->"
+msgstr "Sonrak谋 ->"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Ermenic蓹 (k枚hn蓹) "
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Albanian"
-msgstr "Farsca"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"B蓹lk蓹 d蓹 bu bir S眉r眉c眉 b枚lm蓹sidir.\n"
+"Onda bunu ele bel蓹c蓹 burax谋n.\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polyakca"
+msgid "Guinea-Bissau"
+msgstr "Qvineya Bissau"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Horizontal refresh rate"
+msgstr "脺f眉qi yenil蓹m蓹 s眉r'蓹ti"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Bu disk b枚lm蓹si loopback 眉莽眉n istifad蓹 edildiyind蓹n 枚tr眉 ba臒lanma "
+"n枚qt蓹sind蓹n ayr谋la bilinmir.\n"
+"茝vv蓹lc蓹 loopback-谋 l蓹臒v edin."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zambiya"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "South Africa"
-msgstr "C蓹nubi Afrika"
+msgid "USB controllers"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "serial"
+msgid "What norm is your TV using?"
+msgstr "ISDN ba臒lant谋n谋z谋n n枚v眉 n蓹dir?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayot"
+msgid "Type:"
+msgstr "N枚v: "
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Y蓹m蓹n"
+msgid "Share name"
+msgstr "Payla艧d谋rma ad谋"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "enable"
+msgstr "f蓹alla艧d谋r"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Vallis v蓹 Futuna Adalar谋"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "茝ks 眉nvan谋na ba臒lant谋 qurulur"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"艦蓹b蓹k蓹nin yenid蓹n ba艧lad谋lmas谋 s谋ras谋nda x蓹ta oldu: \n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vyetnam"
+msgid "Remove the loopback file?"
+msgstr "Loopback fayl谋 艧蓹kill蓹ndirilir: %s"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Adalar谋 (AB艦)"
+msgid "Selected size is larger than available space"
+msgstr "Se莽ili b枚y眉kl眉k var olandan daha b枚y眉kd眉r"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Adalar谋 (Britaniya)"
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "M眉q蓹dd蓹s Vinsent v蓹 Qrenadin"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Vatican"
+msgid "Laotian"
msgstr "Yeri"
#: ../../lang.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "脰zb蓹kistan"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruqvay"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokolu bir 艧蓹b蓹k蓹d蓹k谋 istifad蓹莽il蓹rin o 艧蓹b蓹k蓹d蓹k谋 h蓹r hans谋 bir\n"
+"komp眉ter haqq谋ndak谋 qabiliyy蓹t 枚l莽眉l蓹ri ala bilm蓹l蓹rin蓹 imkan ver蓹r."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Birl蓹艧mi艧 艦tatlar yan谋 Ki莽ik Adalar"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Uganda"
-msgstr "Uqanda"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Ekran kart谋n谋z谋 se莽in"
-#: ../../lang.pm:1
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrayna"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Diqq蓹t: Bu qrafika kart谋 il蓹 edil蓹c蓹k s谋naq t蓹hl眉k蓹lidir"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tanzania"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"陌stifad蓹莽i ad谋nda sadac蓹 ki莽ik h蓹rfl蓹r, r蓹q蓹ml蓹r, `-' v蓹 `_' xarakterl蓹ri "
+"ola bil蓹r"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Tayland"
+msgid "Menudrake"
+msgstr "Usta"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Welcome To Crackers"
+msgstr "Krakerl蓹r蓹 xo艧g蓹lmi艧siniz"
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad v蓹 Tobaqo"
+msgid "Module options:"
+msgstr "Modul se莽蓹n蓹kl蓹ri:"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "T眉rkiy蓹"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Tonqa"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "艦蓹b蓹k蓹 Qur臒ular谋"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunis"
+msgid "Abort"
+msgstr "Dayand谋r"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkmenistan"
-msgstr "T眉rkm蓹nistan"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr "艦蓹rqi Timor"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelo"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Bo艧 sah蓹ni istifad蓹 et"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tacikistan"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Tayland"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Sizin Windows b枚l眉m眉 莽ox da臒谋n谋qd谋r. Daxi艧 edirik, 蓹vv蓹lc蓹 birl蓹艧dirin "
+"(defraq)"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Togo"
-msgstr "Toqo"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norve莽c蓹)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "French Southern Territories"
-msgstr "C蓹nubi Frans谋z Sah蓹l蓹ri"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Chad"
-msgstr "脟ad"
+msgid "Unable to fork: %s"
+msgstr "Fork edil蓹 bilmir: %s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "T眉rk v蓹 Kaykos Adalar谋"
+msgid "Type: "
+msgstr "N枚v: "
-#: ../../lang.pm:1
-#, c-format
-msgid "Swaziland"
-msgstr "Svaziland"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "DHCP Al谋c谋s谋"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinam"
+msgid "no fonts found"
+msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Elsalvador"
+msgid "Mouse"
+msgstr "Si莽an"
-#: ../../lang.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome v蓹 Prinsip"
+msgid "not enough room in /boot"
+msgstr "/boot i莽ind蓹 laz谋mi yer yoxdur"
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somali"
+msgid "Host name"
+msgstr "Ev sahibi ad谋"
#: ../../lang.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Seneqal"
+msgid "Liechtenstein"
+msgstr "Lixten艧teyn"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Siera Lione"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakiya"
+msgid "Add to RAID"
+msgstr "RAID蓹 蓹lav蓹 et"
-#: ../../lang.pm:1
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard v蓹 Jan Mayen Adalar谋"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Burada yaboot 眉莽眉n h蓹m ba艧qa 蓹m蓹liyyat sisteml蓹ri, h蓹m alternativ "
+"kernell蓹r,\n"
+" ya da t蓹cili yard谋m a莽谋l谋艧 蓹ksl蓹ri 蓹lav蓹 ed蓹 bil蓹rsiniz.\n"
+"\n"
+"\n"
+"Ba艧qa OSl蓹r 眉莽眉n giri艧in m蓹nas谋 ad v蓹 k枚k 莽谋臒谋r谋ndan ibar蓹tdir.\n"
+"\n"
+"\n"
+"Linuks 眉莽眉n m眉ht蓹m蓹l giri艧l蓹r bunlar ola bil蓹r: \n"
+"\n"
+"\n"
+" - Ad: Bu sad蓹c蓹 olaraq yaboot 眉莽眉n a莽谋lacaq sistemi timsal ed蓹n bir "
+"add谋r.\n"
+"\n"
+"\n"
+" - 茝ks: Bu is蓹 a莽谋lacaq 莽蓹kird蓹yin, y蓹'ni kernelin ad谋d谋r. 脟ox vaxt bu "
+"vmlinux v蓹 ya\n"
+"bunun variasiyalar谋d谋r.\n"
+"\n"
+"\n"
+" - K枚k: Linuks qurulumunun k枚k avadanl谋臒谋 v蓹 ya '/'.\n"
+"\n"
+"\n"
+" \n"
+" - 茝lav蓹: Apple avadanl谋qlar谋nda kernel 蓹lav蓹 se莽蓹n蓹kl蓹ri il蓹 s谋xl谋qla "
+"ba艧lan臒谋c\n"
+"video avadanl谋臒谋 v蓹 ya s谋x s谋x x蓹ta ver蓹n 2ci v蓹 3c眉 si莽an d眉ym蓹l蓹ri 眉莽眉n "
+"emulyasiya\n"
+"imkanlar谋 tan谋na bilir. M蓹s蓹l蓹n bunlar \n"
+"bir ne莽蓹 n眉mun蓹dir:\n"
+"\n"
+"\n"
+"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
+"\n"
+"\n"
+" \n"
+" - Initrd: A莽谋l谋艧 avadanl谋臒谋ndan 蓹vv蓹l b蓹'zi a莽谋l谋艧 modullar谋n谋 se莽m蓹k\n"
+"眉莽眉n i艧l蓹dilir, ya da t蓹cili yard谋m a莽谋l谋艧lar谋nda ramdisk 蓹ksini y眉kl蓹m蓹k "
+"imkan谋 verir.\n"
+"\n"
+"\n"
+" - Initrd-size: Ana ramdisk b枚y眉kl眉y眉 眉mumiyy蓹tl蓹 4096 baytd谋r. 茝g蓹r daha "
+"geni艧 ramdisk bildir蓹\n"
+"bil蓹rsiniz is蓹 bu se莽蓹n蓹yi i艧l蓹din.\n"
+"\n"
+"\n"
+" - Oxuma-yazma: Normalda sistemin 'dirilm蓹sind蓹n' 蓹vv蓹l b蓹'zi s谋naqlar谋n "
+"apar谋la bilm蓹si 眉莽眉n\n"
+"'root' fayl sistemi bu moda soxulur. Bu se莽蓹n蓹yi n蓹z蓹r蓹 almayabil蓹rsiniz.\n"
+"\n"
+"\n"
+" - NoVideo: B蓹lk蓹 Apple video avadanl谋臒谋 problem 莽谋xarda bil蓹r.Onda bu "
+"se莽蓹n蓹kl蓹\n"
+"sistemi 'novideo' modda t蓹bii framebuffer d蓹st蓹yi il蓹 a莽a bil蓹rsiniz.\n"
+"\n"
+"\n"
+" - 茝sas: Bu se莽蓹n蓹kl蓹 Linuks sistemi 蓹sas 蓹m蓹liyyat sistemi hal谋na g蓹tir蓹 "
+"bil蓹rsiniz.\n"
+"Onda ENTER d眉ym蓹sin蓹 basmaqla Linuks sistemi a莽谋lacaqd谋r. Bu giri艧 ayr谋ca "
+"TAB il蓹 a莽谋l谋艧 se莽kil蓹rin蓹 baxd谋臒谋n谋z vaxt \n"
+"'*' i艧ar蓹til蓹 i艧谋qland谋r谋lacaqd谋r."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Sloveniya"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Helena"
-msgstr "M眉q蓹dd蓹s Helena"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "Disket s眉r眉c眉 yoxdur"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Sinqapur"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Continue anyway?"
+msgstr "Davam edilsin?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "Sey艧el"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Adalar谋"
+msgid "Printer"
+msgstr "脟ap Edici"
#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "S蓹udiyy蓹 茝r蓹bistan"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rvanda"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Rusca"
+msgid "Internet"
+msgstr "陌nternet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Romania"
-msgstr "Rumin谋ya"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Reyunion"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometriyas谋: %s silindr, %s ba艧, %s sektor\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Qatar"
-msgstr "Katar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraqvay"
+msgid "Choose the profile to configure"
+msgstr "Qurulacaq profili se莽in"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portuqaliya"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Paket se莽kil蓹rini saxla"
+msgid "Backup Now from configuration file"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "脟ap edici ad谋 t蓹kc蓹 h蓹rf, r蓹q蓹m v蓹 alt x蓹tt daxil ed蓹 bil蓹r"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Porto Riko"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitkairn"
+msgid "See hardware info"
+msgstr "Avadanl谋q m蓹'lumat谋na bax"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "M眉q蓹dd蓹s Pyer v蓹 Migelion"
+msgid "First sector of boot partition"
+msgstr "A莽谋l谋艧 qisminin ilk sektoru"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Poland"
-msgstr "Pol艧a"
+msgid "Printer manufacturer, model"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "PDQ - Print, Don't Queue"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filippin"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Yeni Qvineya"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "French Polynesia"
-msgstr "Frans谋z Poloneziyas谋"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Buradaki iki vacib parametr 眉f眉qi ve 艧aquli yenil蓹m蓹 s眉r'蓹tl蓹ridir.\n"
+"Se莽蓹rk蓹n monitorunuzun qabiliyy蓹tinin 眉st眉nd蓹 bir parametr\n"
+"se莽m蓹m蓹yiniz 莽ox vacibdir, 蓹ks halda monitor z蓹r蓹r g枚r蓹r.\n"
+"Se莽蓹rk蓹n bir q蓹rars谋zl谋臒a d眉艧蓹rs蓹niz, al莽aq rezolyusiya se莽in."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Modify"
+msgstr "T蓹kmill蓹艧dir"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Yeni Zellandiya"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niu"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "HardDrake"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "new"
+msgstr "yeni"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Bir 莽ap edici qurmaq ist蓹yirsiniz?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaraqua"
+msgid "Wizard"
+msgstr "Sehirbaz"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "%s tap谋ld谋"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeriya"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"B枚lm蓹 c蓹v蓹lind蓹ki d蓹yi艧iklikl蓹rin daxil olmas谋 眉莽眉n komp眉terinizi yenid蓹n "
+"ba艧latmal谋s谋n谋z."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Adalar谋"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Please, choose your keyboard layout."
+msgstr "Klaviatura qurulu艧unu se莽iniz."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Yeni Kaledoniya"
+msgid "Standard"
+msgstr "Standart"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Namibia"
-msgstr "Namibiya"
+msgid "Please choose your mouse type."
+msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambiq"
+msgid "Connect..."
+msgstr "Ba臒lan..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "脟ap Edicini Qur"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "yenid蓹n qura艧d谋r"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malayziya"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Dayand谋r"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Meksika"
+msgid "Proxies configuration"
+msgstr "V蓹kil vericil蓹r qura艧d谋r谋lmas谋"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Malawi"
-msgstr "Malavi"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldiv"
+msgid "Start: sector %s\n"
+msgstr "Ba艧lan臒谋c: sektor %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "Monitor qurulmay谋b"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mauritius"
-msgstr "Maurit"
+msgid "Couldn't access the floppy!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Mail Server"
+msgstr "Databeyz"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "Please click on a partition"
+msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mauritania"
-msgstr "Mavritaniya"
+msgid "Linux"
+msgstr "Linuks"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Martinique"
-msgstr "Martiniq"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "艦imali Marian Adalar谋"
+msgid "across Network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Monqolustan"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "G眉nc蓹ll蓹m蓹"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Select Printer Connection"
+msgstr "脟ap Edici Ba臒lant谋s谋 Se莽in"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedoniya"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Mar艧al Adalar谋"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madaqaskar"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (q谋saca inetd ) bir 莽ox \n"
+"ba艧qa internet xidm蓹tcisini laz谋m g蓹ldiyi zaman i艧a sal谋r. 陌莽ind蓹 telnet, "
+"ftp, rsh v蓹 rlogin kimi proqram谋n oldu臒u xidm蓹tl蓹ri i艧蓹 salmaqla m蓹s'uldur.\n"
+"inetd-ni sistemden 莽谋xarmaq, onun m蓹s'ul oldu臒u b眉t眉n xidm蓹tl蓹ri\n"
+"r蓹dd etm蓹k m蓹nas谋n谋 da艧谋y谋r."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Morocco"
-msgstr "M蓹rake艧"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Libya"
-msgstr "Liberiya"
+msgid "Domain Name Server"
+msgstr "Sah蓹(domain) ad谋"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+
+#: ../../fsedit.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Latviya"
+msgid "Mount points must begin with a leading /"
+msgstr "Ba臒lama n枚qt蓹l蓹ri / il蓹 ba艧lamal谋d谋r"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Postfix m蓹ktub vericisi, Inn x蓹b蓹r vericisi"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "L眉ksemburq"
+msgid "Quit without saving"
+msgstr "Qeyd etm蓹d蓹n 脟谋x"
#: ../../lang.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litvaniya"
+msgid "Yemen"
+msgstr "Y蓹m蓹n"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Liberia"
-msgstr "Liberiya"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "艦ri Lanka"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Lixten艧teyn"
+msgid "Hard drive detection"
+msgstr "Sabit disk se莽kisi"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "M眉q蓹dd蓹s Lusiya"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
#: ../../lang.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Livan"
+msgid "Tajikistan"
+msgstr "Tacikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Laos"
-msgstr ""
+msgid "Accept"
+msgstr "Q蓹bul Et"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Qazaxstan"
+msgid "Description"
+msgstr "陌zah"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kayman Adalar谋"
+msgid "Error opening %s for writing: %s"
+msgstr "Yazmaq 眉莽眉n a莽谋lan %s'd蓹 x蓹ta: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "K眉veyt"
+msgid "Mouse type: %s\n"
+msgstr "Si莽an n枚v眉: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Sizin kart谋n谋z谋n XFree %s il蓹 3D d蓹st蓹yi ola bil蓹r."
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "Daha 脟ox"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Klaviatura qurulu艧unu se莽iniz."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "M眉q蓹dd蓹s Kit v蓹 Nevis"
+msgid "Expert Area"
+msgstr "Ustalar谋n Sah蓹si"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Komor"
+msgid "Choose a monitor"
+msgstr "Monitorunuzu se莽in"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Empty label not allowed"
+msgstr "Bo艧 etiket q蓹bul edil蓹 bilm蓹z"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambodiya"
+msgid "Maltese (UK)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Q谋r臒谋z谋stan"
+msgid "I can't add any more partition"
+msgstr "Art谋q b枚lm蓹 蓹lav蓹 edil蓹 bilm蓹z"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Size in MB: "
+msgstr "MB cinsind蓹n b枚y眉kl眉k: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Japan"
-msgstr "Yaponiya"
+msgid "Remote printer"
+msgstr "Uzaq 脟ap Edici"
-#: ../../lang.pm:1
-#, c-format
-msgid "Jordan"
-msgstr "陌ordaniya"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "Yamayka"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"D陌QQ茝T: Bu avadanl谋q daha 蓹vv蓹l 陌ntenet蓹 ba臒lanmaq 眉莽眉n qurulmu艧dur.\n"
+"Avadanl谋臒谋n qur臒ular谋n谋 d蓹yi艧dirma蓹k ist蓹mirsiniz is蓹,\n"
+"OLDU ya bas谋n.\n"
+"A艧a臒谋dak谋 giri艧l蓹ri d眉z蓹ltm蓹niz 枚z眉n眉 蓹vv蓹lki qur臒ular谋n 眉st眉n蓹 yazacaqd谋r."
-#: ../../lang.pm:1
-#, c-format
-msgid "Iceland"
-msgstr "陌slandiya"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Komp眉terinizi avtomatik olaraq bir istifad蓹莽i il蓹 ba艧lada bil蓹r蓹m.\n"
+"陌st蓹mirsiniz is蓹 r蓹dd edin."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "陌raq"
+msgid "Floppy format"
+msgstr "艦蓹kill蓹ndir"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Iraq"
-msgstr "陌raq"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britaniya Hind Okean谋 Sah蓹si"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "脟ap Edici"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "India"
-msgstr "Hindistan"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Israel"
-msgstr "陌srail"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Ireland"
-msgstr "陌zlandiya dili"
+msgid "First sector of the root partition"
+msgstr "A莽谋l谋艧 qisminin ilk sektoru"
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "陌ndoneziya"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungary"
-msgstr "Macar谋stan"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "X谋rvat谋stan"
+msgid "Cape Verde"
+msgstr "Keyp Verde"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Hird Adas谋 v蓹 Mkdonald Adalar谋"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hong Kong"
-msgstr "Honq Konq"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "China"
-msgstr "脟in"
+msgid "Guam"
+msgstr "Quam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Quyana"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Qvineya Bissau"
+msgid "/Options/Test"
+msgstr "/Se莽蓹n蓹kl蓹r/S谋naq"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Guam"
-msgstr "Quam"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Bu s蓹viyy蓹 RAID'i diqq蓹tli istifad蓹nizi t枚vsiy蓹 edirik. Sisteminiz daha "
+"asand\n"
+"i艧l蓹dil蓹c蓹k, ancaq x蓹talara qar艧谋 da h蓹ssaiyy蓹ti d蓹 artacaqd谋r. 陌nternet蓹 \n"
+"ba臒l谋 is蓹niz bunu t枚vsiy蓹 etmirik. Parol il蓹 girilir."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "艦蓹kill蓹ndiril蓹n b枚lm蓹: %s"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "Quatemala"
+msgid "User name"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Cinubi Georgiya v蓹 C蓹nubi Sandvi莽 Adas谋"
+msgid "New configuration (isdn-light)"
+msgstr "Oddan divar (Firewall) qurulu艧u tap谋ld谋!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorial Qvineya"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "脟ap Edici"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Quadelup"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Linuks4Win'i qurmaq 眉莽眉n hans谋 disk b枚lm蓹sini istifad蓹 ed蓹c蓹ksiniz?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea"
-msgstr "Qvineya"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Fayl sistemi qur臒ular谋"
-#: ../../lang.pm:1
-#, c-format
-msgid "Gambia"
-msgstr "Qambiya"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Qap谋lar谋 s谋na"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Greenland"
-msgstr "Qrinland"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "Rezolyusiya: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Soket 脟ap Edici Qur臒ular谋"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Ghana"
-msgstr "Qana"
+msgid "Card mem (DMA)"
+msgstr "Kart mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "France"
+msgstr "Frans谋zca"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "French Guiana"
-msgstr "Frans谋z Gvineyas谋"
+msgid "browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Georgia"
-msgstr "G眉rc眉stan"
+msgid "Checking installed software..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Uzaqdak谋 ev sahibi ad谋"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "脟ap edicini s谋namaq ist蓹yirsiniz?"
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Qrenada"
+msgid "Turkey"
+msgstr "T眉rkiy蓹"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Birl蓹艧mi艧 Krall谋q"
+msgid "Alcatel speedtouch usb"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 d眉ym蓹li"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Qabon"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vyetnam dili \"numeric row\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Si莽an"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Faro Adalar谋"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikroneziya"
+msgid "Hardware"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Fokland Adalar谋 (Malvin)"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fici"
+msgid "United States"
+msgstr "Birl蓹艧mi艧 艦tatlar"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finlandiya"
+msgid "Default OS?"
+msgstr "茝sas OS"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Efiopiya"
+msgid "Swiss (German layout)"
+msgstr "陌sve莽c蓹 (Alman s谋ras谋)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Spain"
-msgstr "陌spaniya"
+msgid "Configure all heads independently"
+msgstr "B眉t眉n ba艧l谋qlar谋 ayr谋 ayr谋 qura艧d谋r"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritre"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NTP Server"
+msgstr "NIS Verici"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Load/Save on floppy"
+msgstr "Disket蓹 qeyd et"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Western Sahara"
-msgstr "Q蓹rbi Saxara"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Egypt"
-msgstr "Misir"
+msgid "nice"
+msgstr "g枚z蓹l"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d saniy蓹 sonra 莽谋x谋lacaq"
+
+#: ../../network/modem.pm:1
#, c-format
-msgid "Estonia"
-msgstr "Estoniya"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "脰lk蓹:"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Qap谋"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Algeria"
-msgstr "茝lc蓹zair"
+msgid "LAN Configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
#: ../../lang.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikan Respublikas谋"
+msgid "Ghana"
+msgstr "Qana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dominica"
-msgstr "Dominik"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Denmark"
-msgstr "Danimarka"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Bu n枚qt蓹d蓹 siz Linuks Mandrake y眉kl蓹m蓹k 眉莽眉n b枚lm蓹l蓹ri se莽m蓹lisiniz. 茝g蓹r "
+"蓹vv蓹ld蓹n b枚lm蓹l蓹r var is蓹 (sistemd蓹 蓹vv蓹ll蓹r qurulu olan GNU/Linuks "
+"b枚lm蓹l蓹ri v蓹 ya ba艧qa b枚lm蓹l蓹ndirm蓹 vasit蓹l蓹ri il蓹 haz谋rlad谋臒谋n谋z b枚lm蓹l蓹r), "
+"onlar谋 se莽in v蓹 istifad蓹 edin.\n"
+"Yoxsa onlar谋 bildirm蓹lisiniz.\n"
+"\n"
+"\n"
+"B枚lm蓹l蓹ri yaratmaq 眉莽眉n 蓹vv蓹lci diski se莽m蓹lisiniz.\n"
+"Diski se莽m蓹k 眉莽眉n birinci IDE s眉r眉c眉s眉 眉莽眉n \"hda\" n谋, ikinciyi se莽m蓹k 眉莽眉n "
+"\"hdb\"ni, birinci SCS陌 s眉r眉c眉s眉 眉莽眉n ise \"sda\" vs t谋qlamal谋s谋n谋z.\n"
+"\n"
+"\n"
+"Se莽diyiniz s眉r眉c眉y蓹 a艧a臒谋dak谋lar谋 etm蓹y蓹 qadirsiniz:\n"
+"\n"
+" *Ham谋s谋n谋 t蓹mizl蓹: se莽ili s眉r眉c眉d蓹 b眉t眉n b枚lm蓹l蓹ri sil蓹r.\n"
+"\n"
+"\n"
+" *Avtomatik: S眉r眉c眉n眉zd蓹ki bo艧 sah蓹d蓹 Ext2 v蓹 Swapb枚lm蓹l蓹rini avtomatik\n"
+"yaradar.\n"
+"\n"
+"\n"
+" *B枚lm蓹 c蓹dv蓹lini qurtar: Z蓹d蓹l蓹nmi艧 b枚lm蓹 c蓹dv蓹linib蓹rpa ed蓹r. Xahi艧 "
+"edirik\n"
+" diqq蓹tli olun, 莽眉nk眉 bu da iflas ed蓹 bil蓹r.\n"
+"\n"
+"\n"
+" *G蓹ri d枚n: 陌st蓹m蓹diyiniz se莽kil蓹rinizd蓹n geri d枚nd蓹r蓹r.\n"
+"\n"
+"\n"
+" *Yenid蓹n y眉kl蓹: B眉t眉n d蓹yi艧iklikl蓹rinizd蓹n geri d枚n蓹rba艧dak谋 b枚lm蓹 "
+"c蓹dv蓹lin蓹 g蓹l蓹r.\n"
+"\n"
+"\n"
+" *Sehirbaz: B枚lm蓹l蓹ndirm蓹yi bir sehirbaz ed蓹r. T蓹cr眉b蓹sizis蓹niz bunu "
+"se莽in.\n"
+"\n"
+"\n"
+" *Floppy-d蓹n b蓹rpa et: B枚lm蓹 c蓹dv蓹lini 蓹vv蓹ll蓹r flopy-y蓹 qeydetdiniz is蓹, "
+"b枚lm蓹 c蓹dv蓹lini b蓹rpa edin.\n"
+"\n"
+"\n"
+" *Floppy-y蓹 qeyd et: Daha sonradan b蓹rpa etmek 眉莽眉nbilgil蓹ri floppy-y蓹 qeyd "
+"edin.\n"
+" Bu se莽ki 艧idd蓹tl蓹 t枚vsiy蓹 edilir.\n"
+"\n"
+"\n"
+" *Oldu: B枚lm蓹l蓹ndirm蓹 bitdiyind蓹, bunu se莽蓹r蓹kd蓹yi艧iklikl蓹rinizi qeyd "
+"edin.\n"
+"\n"
+"\n"
+"X蓹b蓹riniz olsun, ist蓹nil蓹n se莽kiy蓹 Tab ve A艧a臒谋/Yuxar谋 oxlar谋n谋 da i艧l蓹d蓹r蓹k "
+"klaviaturadan idar蓹 ed蓹 bil蓹rsiniz.\n"
+"\n"
+"\n"
+"B枚lm蓹 se莽ildiyi zaman bunlar谋 i艧l蓹d蓹 bil蓹rsiniz:\n"
+"\n"
+" *Ctrl-c yeni b枚lm蓹 yaratmaq 眉莽眉n (bo艧 b枚lm蓹 se莽ili oldu臒u zaman)\n"
+"\n"
+" *Ctrl-d b枚lm蓹ni l蓹臒v etm蓹k 眉莽眉n\n"
+"\n"
+" *Ctrl-m ba臒lama n枚qt蓹sini g枚st蓹rm蓹k 眉莽眉n\n"
+"\n"
+"\n"
+"\n"
+"茝g蓹r PPC komp眉terd蓹 qurulum apar谋rs谋n谋zsa, 蓹n az 1 MBl谋q balaca bir HFC "
+"'bootstrap' b枚lm蓹sini yaboot a莽谋l谋艧 y眉kl蓹yicisi 眉莽眉n se莽m蓹k ist蓹y蓹c蓹ksiniz.\n"
+"茝g蓹r daha 莽ox yeriniz varsa ; m蓹s蓹l蓹n 50 MB, onda b眉t眉n kernel v蓹 ramdisk "
+"蓹ksini t蓹cili a莽谋l谋艧 hallar谋 眉莽眉n saxlaya bil蓹rsiniz."
+
+#: ../../help.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Cibuti"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "Kipr (Yunan v蓹 T眉rk) "
+msgid "There was an error installing packages:"
+msgstr "Paketl蓹r qurulurk蓹n bir x蓹ta oldu:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "陌nternet qur臒ular谋"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Kristmas Adas谋"
+msgid "Undo"
+msgstr "Geri al"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Save partition table"
+msgstr "B枚lm蓹 c蓹dv蓹lini yaz"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Keyp Verde"
+msgid "Finnish"
+msgstr "Finc蓹"
#: ../../lang.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Macedonia"
+msgstr "Makedoniya"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Kolumbiya"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Slovenian"
+msgstr "Slovenc蓹"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Libya"
+msgstr "Liberiya"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Chile"
-msgstr "脟ili"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Skriptl蓹 qurulur, proqram t蓹'minat谋 qurulur, xidm蓹tl蓹r ba艧lad谋l谋r..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cook Islands"
-msgstr "Kuku Adalar谋"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Kot Divuar"
+msgid "Table"
+msgstr "C蓹dv蓹l"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "陌sve莽r蓹"
+msgid "I don't know how to format %s in type %s"
+msgstr "%s'i nec蓹 艧蓹kill蓹ndir蓹c蓹yimi bilmir蓹m (N枚v: %s)"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Si莽an"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Central African Republic"
-msgstr "M蓹rk蓹zi Afrika Respublikas谋"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS Verici"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos Adas谋"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Si莽an"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Belize"
-msgstr "Beliz"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Belarusiya"
+msgid "Use auto detection"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botsvana"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM, Midnight Commander kimi m蓹tn 蓹sasl谋 t蓹'minatlara si莽an d蓹st蓹yi 蓹lav蓹 "
+"ed蓹r.\n"
+"Ayr谋ca konsolda si莽anla k蓹sm蓹 v蓹 yap谋艧d谋rma 蓹m蓹liyyatlar谋na da imkan ver蓹r.\n"
+"Konsolda pop-up menyu d蓹st蓹yi ver蓹r."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Buvet Adas谋"
+msgid "Started on boot"
+msgstr "A莽谋l谋艧da ba艧lad谋l谋r"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahama"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Braziliya"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bolivia"
-msgstr "Boliviya"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruney Dar眉ss蓹lim"
+msgid "East Timor"
+msgstr "艦蓹rqi Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "Del profile..."
+msgstr "Profili sil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing Foomatic..."
+msgstr "%s paketi qurulur"
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahreyn"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "L眉tfen 莽谋x谋n v蓹 Ctrl-Alt-BackSpace d眉ym蓹l蓹rin蓹 bas谋n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bulgaria"
-msgstr "Bolqar谋stan"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "%s tap谋ld谋"
-#: ../../lang.pm:1
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr ""
+"Bu paket yenil蓹nm蓹lidir\n"
+"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr "Banqlade艧"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Paket Qrup Se莽kisi"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosniya v蓹 Herzoqovina"
+msgid "SECURITY WARNING!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "陌艧 Yeri"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Az蓹rbaycan"
+msgid "No, I don't want autologin"
+msgstr "Xeyr, Avtomatik giri艧 ist蓹mir蓹m"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Australia"
-msgstr "serial"
+msgid "All languages"
+msgstr "陌艧l蓹tdiyiniz dili se莽in"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "Rezolyusiya: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerikan Samoa"
+msgid "Testing your connection..."
+msgstr "Ba臒lant谋n谋z s谋nan谋r..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "par莽a b枚y眉kl眉y眉"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Parollar f蓹alla艧d谋r谋ld谋, yen蓹 d蓹 bir 艧蓹b蓹k蓹 眉st眉nd蓹 istifad蓹 edilm蓹m蓹si "
+"t枚vsiy蓹 edilir."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktika"
+msgid "Start sector: "
+msgstr "Ba艧lan臒谋莽 sektoru: "
#: ../../lang.pm:1
#, c-format
-msgid "Angola"
-msgstr "Anqola"
+msgid "Congo (Brazzaville)"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Bu paket yenil蓹nm蓹lidir\n"
+"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
#: ../../lang.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Holland Antill蓹ri"
+msgid "Seychelles"
+msgstr "Sey艧el"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Erm蓹nistan"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Parolsuz"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albaniya"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anquilla"
+msgid "Zambia"
+msgstr "Zambiya"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antiq v蓹 Barbuda"
+msgid "Security Administrator (login or email)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Birl蓹艧mi艧 茝r蓹b 茝mirlikl蓹ri"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwerty)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "茝fqan谋stan"
+msgid "Czech Republic"
+msgstr "脟ex Respublikas谋"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Egypt"
+msgstr "Misir"
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dair蓹vi ba臒lama %s\n"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Old configuration (isdn4net)"
+msgstr "Oddan divar (Firewall) qurulu艧u tap谋ld谋!"
-#: ../../lvm.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "M蓹ntiqi ciltl蓹ri birinci olaraq sil\n"
+msgid "Sound card"
+msgstr "S蓹s kart谋"
-#: ../../modules.pm:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "B枚lm蓹 艧蓹kill蓹ndirilm蓹si"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"T蓹k bir b枚y眉k disk b枚lm蓹niz var\n"
+"(蓹sas蓹n MS DOS/Windows istifad蓹 ed蓹r).\n"
+"茝vv蓹lc蓹 bu disk b枚lm蓹sinin b枚y眉kl眉y眉n眉 d蓹yi艧dirm蓹yinizi\n"
+"t枚vsiy蓹 edirik. 茝vv蓹lc蓹 b枚lm蓹nin 眉st眉n蓹, sonra \"B枚y眉kl眉y眉\n"
+"D蓹yi艧dir\" d眉ym蓹sin蓹 t谋qlay谋n"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "T茝K茝R陌 OYNADIN!"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Si莽an谋n谋z谋 i艧蓹 salmaq 眉莽眉n,"
+msgid "Change partition type"
+msgstr "B枚lm蓹 n枚v眉n眉 D蓹yi艧dir"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Si莽ans谋zs"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Modul se莽蓹n蓹kl蓹ri:"
-#: ../../mouse.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "none"
-msgstr "he莽 biri"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "3 buttons"
-msgstr "3 d眉ym蓹li"
+msgid "Statistics"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "2 buttons"
-msgstr "2 d眉ym蓹li"
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "(modul %s)"
#: ../../mouse.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 d眉ym蓹"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "average"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da k枚hn蓹 C7 n枚v眉)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "脟ap Edicisiz"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Equatorial Guinea"
+msgstr "Ekvatorial Qvineya"
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwertz)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "yenid蓹n qura艧d谋r"
+
+#: ../../services.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"routed vasit蓹si avtomatik IP router c蓹dv蓹linin RIP protokolu t蓹r蓹find蓹n\n"
+"yenil蓹nm蓹sin蓹 imkan ver蓹r. RIP 蓹sas蓹n ki莽ik 艧蓹b蓹k蓹l蓹rd蓹 istifad蓹 edilir, "
+"daha b枚y眉k\n"
+"艧蓹b蓹k蓹l蓹rd蓹 daha qar谋艧谋q routing protokollar谋na ehtiyac谋 vard谋r."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Browse"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "S谋ravi 3 D眉ym蓹li Si莽an"
+msgid "CDROM"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "S谋ravi 2 D眉ym蓹li Si莽an"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "陌nternete giri艧i indi s谋namaq ist蓹yirsiniz?"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "serial"
-msgstr "serial"
+msgid "Belgian"
+msgstr "Bel莽ika dili"
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you have an ISA sound card?"
+msgstr "Ba艧qa var?"
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Wheel"
-msgstr "脟蓹rx"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Sisteminizd蓹 he莽 bir eternet 艧蓹b蓹k蓹 adapteri tap谋la bilm蓹di.\n"
+"Bu ba臒lant谋 艧蓹klini qura bilm蓹r蓹m."
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Generic"
-msgstr "脺mumi"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "NIS sah蓹si"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "Art谋q b枚lm蓹 蓹lav蓹 edil蓹 bilm蓹z"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Ev sahibi ad谋"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "/File/Save _As"
+msgstr "/Fayl/_F蓹rqli Qeyd Et"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "S谋ravi PS2 脟蓹rxli Si莽an"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standart"
+msgid "Delay before booting default image"
+msgstr "A莽谋l谋艧da gecikm蓹 m眉dd蓹ti"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Si莽an"
+msgid "Restrict command line options"
+msgstr "茝mr s蓹tiri se莽蓹n蓹kl蓹rini m蓹hdudla艧d谋r"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Avropa"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq v蓹 grup s谋ralamas谋 aras谋nda g蓹z"
+msgid "Use free space"
+msgstr "Bo艧 sah蓹ni istifad蓹 et"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "A臒ac谋 Qapat"
+msgid "use dhcp"
+msgstr "dhcp istifad蓹 et"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Expand Tree"
-msgstr "A臒ac谋 A莽"
+msgid "Mail alert"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Info"
-msgstr "M蓹'lumat"
+msgid "Internet configuration"
+msgstr "陌nternet qur臒ular谋"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Do臒rudur?"
+msgid "Uzbekistan"
+msgstr "脰zb蓹kistan"
-#: ../../my_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "%s tap谋ld谋"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr ""
+msgid "Finish"
+msgstr "Qurtar"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "%s fayl谋na yazark蓹n x蓹ta oldu"
+msgid "Show automatically selected packages"
+msgstr "Avtomatik se莽ili paketl蓹ri g枚st蓹r"
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bad backup file"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s fayl谋ndan qurtar谋l谋艧da x蓹ta: %s"
+msgid "Togo"
+msgstr "Toqo"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""
-"B枚lm蓹 c蓹dv蓹linizd蓹 bir bo艧luq var, amma o da i艧l蓹dil蓹 bilm蓹z.\n"
-"Bu bo艧lu臒u, birinci b枚lm蓹nizi en yax谋n谋ndak谋 geni艧l蓹dilmi艧 b枚lm蓹y蓹 "
-"da艧谋yaraq\n"
-"m蓹s蓹l蓹ni h蓹ll ed蓹 bil蓹rsiniz."
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda geni艧l蓹dilmi艧 b枚lm蓹l蓹r d蓹st蓹kl蓹nmir"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../partition_table.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "ba臒lama iflas etdi: "
+msgid "Please try again"
+msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "b蓹lk蓹"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "Do臒rudur?"
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "nice"
-msgstr "g枚z蓹l"
+msgid "FAT resizing failed: %s"
+msgstr "FAT b枚y眉kl眉y眉 d蓹yi艧dirilm蓹si bacar谋lmad谋: %s"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "very nice"
-msgstr "蓹la"
+msgid "Individual package selection"
+msgstr "F蓹rdi paket se莽kisi"
-#: ../../pkgs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "important"
-msgstr "vacib"
+msgid "This partition is not resizeable"
+msgstr "Hans谋 b枚lm蓹 n枚v眉n眉 ist蓹yirsiniz?"
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "must have"
-msgstr "al谋nmal谋"
+msgid "Location"
+msgstr "Yeri"
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d s蓹viyy蓹 RAID 眉莽眉n 莽atmayan sayda disk b枚lm蓹si\n"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "ba臒lama iflas etdi"
+
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
+msgid "Guatemala"
+msgstr "Quatemala"
-#: ../../raid.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "ox艧ay谋r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools 蓹ksik ola bil蓹r mi?)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS s眉r眉c眉 h蓹rfi: %s (sad蓹c蓹 t蓹xmini)\n"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "艦蓹kill蓹ndirilmi艧 RAID md%d-y蓹 disk b枚lm蓹si 蓹lav蓹 edil蓹 bilinm蓹di"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sektor"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahrain"
+msgstr "Bahreyn"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Hal:"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr "scsi modullar谋 ke莽"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "On boot"
-msgstr "A莽谋l谋艧da"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Bu xidm蓹t haqq谋nda t蓹蓹s眉f ki,\n"
-"蓹lav蓹 m蓹'lumat yoxdur."
+"艦蓹b蓹k蓹d蓹n qura艧d谋rmas谋 apard谋臒谋n谋z 眉莽眉n 艧蓹b蓹k蓹niz art谋q qurulmu艧 olmal谋d谋r.\n"
+"艦蓹b蓹k蓹/陌nternet ba臒lant谋n谋z谋 yenid蓹n qura艧d谋rmaq 眉莽眉n Oldu'ya yoxsa L蓹臒v "
+"et'蓹 bas谋n.\n"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Xidm蓹tl蓹r v蓹 vasit蓹l蓹r"
+msgid "Keyboard layout: %s\n"
+msgstr "Klavatura d眉z眉l眉艧眉: %s\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "stopped"
-msgstr "dayand谋r谋l谋b"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "running"
-msgstr "i艧l蓹mir"
+msgid "Maltese (US)"
+msgstr ""
#: ../../services.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "A莽谋l谋艧da avtomatik olaraq ba艧layacaq xidm蓹tl蓹ri se莽in"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"B眉t眉n 艦蓹b蓹k蓹 Fayl Sisteml蓹rini (NFS), SMB (Lan Manager/Windows), v蓹 \n"
+"NCP (NetWare) ba臒lama n枚qt蓹l蓹rini ba臒lar v蓹 ay谋r谋r."
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Databeyz"
+msgid "Tvcard"
+msgstr "TV kart谋"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Uzaq 脟ap Edici (lpd) Se莽蓹n蓹kl蓹ri"
+msgid "Toggle between normal/expert mode"
+msgstr "Normal moda ke莽"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "File sharing"
-msgstr ""
+msgid "Size"
+msgstr "B枚y眉kl眉k"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Internet"
-msgstr "陌nternet"
+msgid "GRUB"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Printing"
-msgstr "脟ap Edici"
+#: ../../lang.pm:1
+#, c-format
+msgid "Greenland"
+msgstr "Qrinland"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini a莽谋l谋艧da i艧蓹 salar (Bu, XFree icras谋 眉莽眉n m蓹cburidir)."
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanl谋臒谋n谋z 眉莽眉n s眉r眉c眉l蓹ri y眉kl蓹yin."
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Syslog, bir 莽ox vasit蓹nin ismar谋clar谋n谋 m眉xt蓹lif sistem qeydl蓹rind蓹\n"
-"tutmalar谋na imkan ver蓹r. Syslog'un h蓹r zaman i艧l蓹m蓹si\n"
-"yax艧谋 fikirdir."
+"陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si qurulmas谋 art谋q bitdi.\n"
+"V蓹 art谋q f蓹alla艧d谋r谋lm谋艧d谋r.\n"
+"\n"
+"N蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Komp眉terinizd蓹 s蓹s sistem谋 ba艧lad谋n"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Fayl se莽"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-"rwho protokolu, uzaq istifad蓹莽il蓹rin, rwho vasit蓹si i艧l蓹d蓹n bir komp眉terd蓹\n"
-"olan b眉t眉n istifad蓹莽il蓹ri g枚rm蓹l蓹rina imkan ver蓹r."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-"rusers protokolu bir 艧蓹b蓹k蓹d蓹k谋 istifad蓹莽il蓹rin o 艧蓹b蓹k蓹d蓹k谋 komp眉terl蓹rd蓹\n"
-"i艧l蓹y蓹n istifad蓹莽il蓹ri g枚rm蓹sin蓹 imkan ver蓹r."
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir 艧蓹b蓹k蓹d蓹k谋 istifad蓹莽il蓹rin o 艧蓹b蓹k蓹d蓹k谋 h蓹r hans谋 bir\n"
-"komp眉ter haqq谋ndak谋 qabiliyy蓹t 枚l莽眉l蓹ri ala bilm蓹l蓹rin蓹 imkan ver蓹r."
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Nec蓹 bir XFree qur臒usunu ist蓹yirsiniz?"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasit蓹si avtomatik IP router c蓹dv蓹linin RIP protokolu t蓹r蓹find蓹n\n"
-"yenil蓹nm蓹sin蓹 imkan ver蓹r. RIP 蓹sas蓹n ki莽ik 艧蓹b蓹k蓹l蓹rd蓹 istifad蓹 edilir, "
-"daha b枚y眉k\n"
-"艧蓹b蓹k蓹l蓹rd蓹 daha qar谋艧谋q routing protokollar谋na ehtiyac谋 vard谋r."
+msgid "More"
+msgstr "Daha 脟ox"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
+"Bu t蓹hl眉k蓹sizlik s蓹viyy蓹siyl蓹 sistemin bir verici olaraq istifad蓹si "
+"m眉mk眉nd眉r. \n"
+"T蓹hl眉k蓹sizlik, bird蓹n 莽ox al谋c谋n谋n ba臒lanmas谋na icaz蓹 ver蓹c蓹k 艧蓹kild蓹 "
+"art谋r谋lm谋艧d谋r. "
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "Hesap Parolu"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-"Y眉ks蓹k keyfiyy蓹t t蓹sad眉fi r蓹q蓹m istehsal ed蓹n sistem entropi hovuzunun \n"
-"saxlanmas谋 v蓹 yenid蓹n k枚hn蓹 hal谋na g蓹tirilm蓹sin蓹 imkan ver蓹r."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "Thai klaviatura"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Posfix, elektronik m蓹ktublar谋n bir komp眉terd蓹n dig蓹rin蓹 yollayan \n"
-"Elektronik M蓹ktub Yollama Vasit蓹sidir."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Ba臒lama n枚qt蓹si"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"portmapper, NFS ve NIS kimi protokollar t蓹r蓹find蓹n istifad蓹 edil蓹n RPC \n"
-"ba臒lant谋lar谋n谋 t蓹艧kilatland谋r谋r. Portmap vericisi RPC mexanizmini i艧l蓹d蓹n\n"
-"protokollarla xidm蓹t ed蓹n komp眉terl蓹rd蓹 qurulmal谋d谋r v蓹 i艧l蓹dilm蓹lidir."
+"Siz Open F陌rmware a莽谋l谋艧 avadanl谋臒谋n谋z谋 a莽谋l谋艧 y眉kl蓹yicisini\n"
+"f蓹alla艧d谋rmaq 眉莽眉n d蓹yi艧dirm蓹li ola bil蓹rsiniz. 茝mr-Se莽蓹n蓹k-O-F d眉ym蓹l蓹rini\n"
+" yenid蓹n ba艧lark蓹n bas谋n v蓹 bunlar谋 girin:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Sonra da bunlar谋 yaz谋n: shut-down\n"
+"Bir sonrak谋 ba艧lan臒谋cda a莽谋l谋艧 y眉kl蓹yicisi s蓹tirini g枚rm蓹lisiniz."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"PCMCIA d蓹st蓹yi, laptoplarda eternet v蓹 modem kimi avadanl谋qlar谋n "
-"d蓹st蓹kl蓹nm蓹sin蓹 imkan ver蓹r.\n"
-"Qurulmad谋臒谋 vaxtda a莽谋l谋艧da i艧l蓹m蓹z, i艧l蓹m蓹sin蓹 ehtiyac olmayan\n"
-"komp眉terl蓹rd蓹 qurulu olmas谋 problem yaratmaz."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w v蓹 uy臒un Windows 莽ap edicil蓹rini d蓹st蓹kl蓹."
+msgid "Select file"
+msgstr "Fayl se莽"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"A莽谋l谋艧da XFree v蓹 konsolda numlock d眉ym蓹sini\n"
-"avtomatik olaraq a莽."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"NFS TCP/IP 艧蓹b蓹k蓹l蓹rind蓹 fayl b枚l眉艧眉lm蓹si 眉莽眉n istifad蓹 edil蓹n m蓹艧hur bir \n"
-"protokoldur. Bu xidm蓹t NFS fayl q谋f谋l谋 istifad蓹sin蓹 imkan ver蓹r."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP 艧蓹b蓹k蓹l蓹rind蓹 fayl b枚l眉艧眉lm蓹si 眉莽眉n istifad蓹 edil蓹n m蓹艧hur bir "
-"protokoldur.\n"
-"Bu xidm蓹t, /etc/exports fayl谋nda qur臒ular谋 olan NFS vericisinin\n"
-"istifad蓹sin蓹 imkan ver蓹r."
+msgid "Japan"
+msgstr "Yaponiya"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "脟ap edici se莽蓹n蓹kl蓹ri"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-"A莽谋l谋艧 s谋ras谋nda ba艧lamaq 眉莽眉n qurulmu艧 b眉t眉n 艧蓹b蓹k蓹 axtar 眉zl蓹rini "
-"f蓹alla艧d谋r谋r ya da qapat谋r."
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS verici"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "NCP queue name missing!"
msgstr ""
-"B眉t眉n 艦蓹b蓹k蓹 Fayl Sisteml蓹rini (NFS), SMB (Lan Manager/Windows), v蓹 \n"
-"NCP (NetWare) ba臒lama n枚qt蓹l蓹rini ba臒lar v蓹 ay谋r谋r."
-#: ../../services.pm:1
-#, fuzzy, c-format
+#: ../../standalone/net_monitor:1
+#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"named (BIND) verici adlar谋n谋 IP 眉nvanlar谋na 莽evir蓹n\n"
-"Sah蓹 Ad谋 Vericisidir(DNS)."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "\"%s\" adl谋 Cd-Rom"
#: ../../services.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Linuks Virtual Verici, y眉ks蓹k qabiliyy蓹tli vericil蓹r qurmaq 眉莽眉n i艧l蓹dilir."
+"Y眉ks蓹k keyfiyy蓹t t蓹sad眉fi r蓹q蓹m istehsal ed蓹n sistem entropi hovuzunun \n"
+"saxlanmas谋 v蓹 yenid蓹n k枚hn蓹 hal谋na g蓹tirilm蓹sin蓹 imkan ver蓹r."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"lpd, lpr'nin d眉zg眉n olaraq i艧l蓹m蓹si 眉莽眉n laz谋mi 莽ap edici vasit蓹sidir.\n"
-"lpd 蓹sas蓹n, 莽ap v蓹zif蓹l蓹rini idar蓹 ed蓹n v蓹 onlar谋 莽ap ediciy蓹 g枚nd蓹r蓹n "
-"vericidir."
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Turn your computer into a reliable server"
msgstr ""
-"Linuxconf sistem qur臒ular谋n谋z谋 idar蓹 ed蓹n proqramlar谋\n"
-"m眉xt蓹lif v蓹zif蓹l蓹ri a莽谋l谋艧da icra ed蓹r."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanl谋臒谋n a莽谋l谋艧da avtomatik t蓹sbiti v蓹 qurulmas谋."
+msgid " (driver %s)"
+msgstr " (s眉r眉c眉 %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"/usr/include/linux/{autoconf,version}.h 眉莽眉n \n"
-"/boot-da avtomatik 莽蓹kird蓹k ba艧l谋臒谋 yarad谋lmas谋."
+"Loopback fayl谋:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dak谋 se莽ili klaviatura d眉z眉l眉艧眉n眉 y眉kl蓹r.\n"
-"Hans谋 klaviatura d眉z眉l眉艧眉 istifad蓹 edil蓹c蓹yi kbdconfig il蓹 se莽ilir.\n"
-"Bu, mandrake qurulan bir 莽ox komp眉terd蓹 f蓹al burax谋lmal谋d谋r."
+msgid "I don't know"
+msgstr "Bilmir蓹m"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-"Linuks 2.2 seriyas谋 莽蓹kird蓹kl蓹rind蓹 firewall\n"
-"qurmaq 眉莽眉n 眉莽眉n paket s眉z眉lm蓹sini ba艧lat."
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Internet superserver daemon (q谋saca inetd ) bir 莽ox \n"
-"ba艧qa internet xidm蓹tcisini laz谋m g蓹ldiyi zaman i艧a sal谋r. 陌莽ind蓹 telnet, "
-"ftp, rsh v蓹 rlogin kimi proqram谋n oldu臒u xidm蓹tl蓹ri i艧蓹 salmaqla m蓹s'uldur.\n"
-"inetd-ni sistemden 莽谋xarmaq, onun m蓹s'ul oldu臒u b眉t眉n xidm蓹tl蓹ri\n"
-"r蓹dd etm蓹k m蓹nas谋n谋 da艧谋y谋r."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Apache bir World Wide Web vericisidir. HTML fayllar谋 v蓹 CGI verilm蓹si 眉莽眉n "
-"istifad蓹 edilir."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Qurulumdan 莽谋x"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid " ("
msgstr ""
-"HardDrake texniki t蓹'minat s谋na臒谋 aparar v蓹 onlar谋 bir 枚n qura艧d谋rmadan "
-"ke莽ir蓹r."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Az蓹rbaycanca (kiril)"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi m蓹tn 蓹sasl谋 t蓹'minatlara si莽an d蓹st蓹yi 蓹lav蓹 "
-"ed蓹r.\n"
-"Ayr谋ca konsolda si莽anla k蓹sm蓹 v蓹 yap谋艧d谋rma 蓹m蓹liyyatlar谋na da imkan ver蓹r.\n"
-"Konsolda pop-up menyu d蓹st蓹yi ver蓹r."
+msgid "Add a module"
+msgstr "Modul 蓹lav蓹 et"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifad蓹莽il蓹r蓹 x眉susi 蓹mrl蓹ri periodik olaraq i艧蓹 sala bil蓹n\n"
-"standart bir UNIX proqram谋d谋r. vixie cron, standart cron'a 蓹lav蓹 edilmi艧 bir "
-"莽ox\n"
-"yeni x眉susiyy蓹t daxildir."
+msgid "Profile to delete:"
+msgstr "Silin蓹c蓹k profil:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Yerli 脟ap Edici"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "busmouse"
+msgstr "busmouse"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Login (user name)"
+msgstr "Hesab Giri艧i (istifad蓹莽i ad谋)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
msgstr ""
-"at 蓹mri, zamanlanan 蓹mrl蓹ri i艧l蓹m蓹l蓹ri laz谋m g蓹l蓹n vaxtda i艧l蓹dir.\n"
-"Sistem y眉k眉 laz谋mi q蓹d蓹r al莽aq oldu臒unda y谋臒ma 蓹mrl蓹ri i艧l蓹dilir."
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"apmd batareya v蓹ziyy蓹tini izl蓹m蓹k 眉莽眉n v蓹 syslog arac谋l谋臒谋yla bunun qeydini "
-"tutmaq 眉莽眉n istifad蓹 edilir.\n"
-"Ayr谋ca batareya azald谋臒谋nda sistemi qapatmaq 眉莽眉n d蓹 istifad蓹 edilir."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anakron, periodik 蓹mr zamanlay谋c谋s谋"
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA s蓹s sistemini (Advanced Linux Sound Architecture) ba艧lat"
+msgid "Uruguay"
+msgstr "Uruqvay"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
+msgid "Path selection"
+msgstr "Paket se莽kil蓹rini saxla"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"B蓹'z蓹n s眉r眉c眉n眉zd蓹 pis 艧eyl蓹r ola bil蓹r.\n"
+"Datan谋n b眉t枚vl眉y眉 yoxlamas谋 bacar谋lmad谋. \n"
+"Bu o demekdir ki disk蓹 yaz谋lan h蓹r 艧ey t蓹sad眉fi olacaqd谋r"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "脟ap Edici Ev sahibi"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Bangladesh"
+msgstr "Banqlade艧"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "陌nit 陌smar谋c谋"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "Davam et"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Klaviatura"
+msgid "Custom Restore"
+msgstr "X眉susi"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "Skript 蓹sasl谋"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "%s fayl谋 oxunurkan x蓹ta oldu"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "艦蓹kill蓹ndirilir"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Bir swap sah蓹sin蓹 ehtiyac谋n谋z var"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Dig蓹r sisteml蓹r (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Qurulum/G眉nc蓹ll蓹m蓹"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paket"
+
#: ../../standalone.pm:1
#, c-format
msgid ""
@@ -6734,3946 +6093,4265 @@ msgid ""
"--version : show version number.\n"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Tan谋tma"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Qurulumdan 莽谋x"
+msgid "Costa Rica"
+msgstr "Kosta Rika"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Sistemi qur"
+msgid "Use libsafe for servers"
+msgstr "X verici 眉莽眉n se莽蓹n蓹kl蓹ri g枚st蓹rin"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Xidm蓹tl蓹ri qur"
+msgid "Icelandic"
+msgstr "陌zlandiya dili"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure X"
-msgstr "X qur"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Sistem y眉kl蓹yicini qur"
+msgid "Please relog into %s to activate the changes"
+msgstr "\"%s\"a(蓹) t蓹krar girin v蓹 d蓹yi艧iklikl蓹ri f蓹alla艧d谋r谋n"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "艦蓹b蓹k蓹ni qur"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Add a user"
-msgstr "陌stifad蓹莽i 蓹lav蓹 et"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modu"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Root password"
-msgstr "Root parolunu qur"
+msgid "Output"
+msgstr "N蓹tic蓹"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Install system"
-msgstr "Sistemi qur"
+msgid "Circular mounts %s\n"
+msgstr "Dair蓹vi ba臒lama %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketl蓹ri se莽in"
+msgid "Martinique"
+msgstr "Martiniq"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format partitions"
-msgstr "B枚lm蓹 艧蓹kill蓹ndirilm蓹si"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "脟ap Edici"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Klaviaturan谋z谋 se莽in"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "Qurulu艧 sinifini se莽in"
+msgid "a number"
+msgstr "Telefon n枚mr蓹si"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Sabit disk se莽kisi"
+msgid "Swedish"
+msgstr "陌sve莽c蓹"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Si莽an qur臒ular谋"
+msgid "Which %s driver should I try?"
+msgstr "Hans谋 %s s眉r眉c眉s眉 s谋nans谋n?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "陌艧l蓹tdiyiniz dili se莽in"
+msgid "Filesystem types:"
+msgstr "Fayl sistemi n枚v眉:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Oldu"
+msgid "Northern Mariana Islands"
+msgstr "艦imali Marian Adalar谋"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "he莽 biri"
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Sizin kart谋n谋z谋n XFree %s il蓹 3D d蓹st蓹yi ola bil蓹r.\n"
-"D陌QQ茝T! BU SINAQ M茝RH茝L茝SIND茝DIR V茝 KOMP脺TER陌N陌Z DONDURA BIL茝R."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ M茝RH茝L茝S陌ND茝K陌 3D s眉r'蓹tl蓹ndirm蓹 d蓹st蓹kli XFree %s"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kart谋n谋z谋n XFree %s il蓹 3D d蓹st蓹yi ola bil蓹r."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanl谋q s眉r'蓹tl蓹ndirm蓹si il蓹 XFree %s"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Disket蓹 qeyd et"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kart谋n谋z谋n 3D s眉r'蓹tl蓹ndirm蓹 d蓹st蓹yi ola bil蓹r, amma sadec蓹 olaraq "
-"XFree %s\n"
-"il蓹 d眉zg眉n i艧l蓹y蓹r.\n"
-"D陌QQ茝T! BU SINAQ M茝RH茝L茝SIND茝DIR V茝 KOMP脺TER陌N陌Z DONDURA BIL茝R.\n"
-"Sizin kart谋n谋za XFree %s t蓹r蓹find蓹n d蓹st蓹k verilir ve bu 2D 眉莽眉n daha yax艧谋 "
-"bir se莽ki olar."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Ghostscript referencing"
msgstr ""
-"Sizin kart谋n谋z谋n 3D s眉r'蓹tl蓹ndirm蓹 d蓹st蓹yi ola bil蓹r, amma sadec蓹 olaraq "
-"XFree %s\n"
-"il蓹 d眉zg眉n i艧l蓹y蓹r.\n"
-"Sizin kart谋n谋za XFree %s t蓹r蓹find蓹n d蓹st蓹k verilir ve bu 2D 眉莽眉n daha yax艧谋 "
-"bir fikir olar."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "T蓹kc蓹 \"%s\" kart谋n谋 qur (%s)"
+msgid "Bootloader"
+msgstr "陌stifad蓹 edil蓹c蓹k A莽谋l谋艧 idar蓹cisi"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifad蓹l蓹rini i艧l蓹t"
+msgid "Move"
+msgstr "Da艧谋"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "B眉t眉n ba艧l谋qlar谋 ayr谋 ayr谋 qura艧d谋r"
+msgid "Bootloader to use"
+msgstr "陌stifad蓹 edil蓹c蓹k A莽谋l谋艧 idar蓹cisi"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Nec蓹 bir XFree qur臒usunu ist蓹yirsiniz?"
+msgid "SMB server host"
+msgstr "SMB verici ad谋"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS Verici"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree qura艧d谋r谋lmas谋"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a 艧蓹b蓹k蓹. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Ekran kart谋n谋z谋n yadda艧 b枚y眉kl眉y眉n眉 se莽in"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Sizin sisteminiz 莽oxlu ba艧l谋q qura艧d谋rmas谋n谋 d蓹st蓹kl蓹yir.\n"
-"N蓹 etm蓹k ist蓹yirsiniz?"
+"Linuks Virtual Verici, y眉ks蓹k qabiliyy蓹tli vericil蓹r qurmaq 眉莽眉n i艧l蓹dilir."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "脟oxlu Ba艧l谋q qura艧d谋r谋lmas谋"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Bir X vericisi se莽in"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milyard r蓹ng (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "X server"
-msgstr "X verici"
+msgid "Micronesia"
+msgstr "Mikroneziya"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB v蓹 ya daha 莽ox"
+msgid "License"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "This may take a moment to generate the keys."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Bir x蓹ta oldu. Yeni fayl sisteminin yarad谋laca臒谋 h枚kml眉 bir s眉r眉c眉 "
+"tap谋lmad谋. Bu problemin qayna臒谋 眉莽眉n avadanl谋臒谋n谋z谋 yoxlay谋n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Ba臒lant谋n谋z谋 a莽谋l谋艧da ba艧latmaq ist蓹yirsiniz?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polyakca (QWERTY s谋ras谋)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "F蓹al"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
-msgstr ""
-"M枚vcud qur臒ular谋 saxlay谋m?\n"
-"Hal-haz谋rk谋 qur臒ular:\n"
+"Drakbackup activities via CD:\n"
"\n"
-"%s"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Se莽蓹n蓹kl蓹r"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
+msgid "Host \"%s\", port %s"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Rezolyusiya"
+msgid "This partition can't be used for loopback"
+msgstr "Bu disk b枚lm蓹si loopback 眉莽眉n i艧l蓹dilm蓹z"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfig/main.pm:1
-#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Ekran kart谋"
+msgid "File already exists. Use it?"
+msgstr "Fayl onsuz da vard谋r. 陌艧l蓹dilsin?"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "艦aquli yenil蓹m蓹 s眉r'蓹ti"
+msgid "received: "
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "脺f眉qi yenil蓹m蓹 s眉r'蓹ti"
+msgid "Right Alt key"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"Buradaki iki vacib parametr 眉f眉qi ve 艧aquli yenil蓹m蓹 s眉r'蓹tl蓹ridir.\n"
-"Se莽蓹rk蓹n monitorunuzun qabiliyy蓹tinin 眉st眉nd蓹 bir parametr\n"
-"se莽m蓹m蓹yiniz 莽ox vacibdir, 蓹ks halda monitor z蓹r蓹r g枚r蓹r.\n"
-"Se莽蓹rk蓹n bir q蓹rars谋zl谋臒a d眉艧蓹rs蓹niz, al莽aq rezolyusiya se莽in."
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
+msgid "Gateway"
+msgstr "Ke莽it"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Geri al"
+msgid "Scanner sharing"
+msgstr "脟ap Edici"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Tonga"
+msgstr "Tonqa"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Monitorunuzu se莽in"
+msgid "Tunisia"
+msgstr "Tunis"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Ekran kart谋: %s"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya v蓹 r蓹ng d蓹rinliyini se莽in"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
+msgid "XawTV isn't installed!"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard r蓹ng (32 bits)"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon r蓹ng (24 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min r蓹ng (16 bits)"
+msgid "old static device name used in dev package"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min r蓹ng (15 bits)"
+msgid "This label is already used"
+msgstr "Bu etiket istifad蓹 edilm蓹z"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 r蓹ng (8 bits)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Do臒rudur?"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"%s b枚lm蓹si 艧蓹kill蓹ndirildikd蓹n sonra bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar "
+"silin蓹c蓹kdir"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniy蓹 sonra 莽谋x谋lacaq"
+msgid "Connection Time: "
+msgstr "Ba臒lant谋 n枚v眉:"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "select perm file to see/edit"
+msgstr ""
+
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"Qurma Cd-Romunu s眉r眉c眉n眉z蓹 tax谋n v蓹 OLDUya bas谋n.\n"
+"茝g蓹r Cd-Rom 蓹linizd蓹 yox is蓹, bu Cd-Rom-dan qurmamaq 眉莽眉n R茝DD ET蓹 bas谋n."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Diqq蓹t: Bu qrafika kart谋 il蓹 edil蓹c蓹k s谋naq t蓹hl眉k蓹lidir"
+msgid "Use group id for execution"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
+msgid "Choose the default user:"
+msgstr "茝sas istifad蓹莽ini se莽in:"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Qur臒ular谋n s谋na臒谋"
+msgid "Gabon"
+msgstr "Qabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "ISDN ba臒lant谋n谋z谋n n枚v眉 n蓹dir?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"Uzaq CUPS vericil蓹ri 眉莽眉n he莽 bir qura艧d谋rma臒a l眉z眉m yoxdur\n"
+"Buradak谋 h蓹r 莽ap edici avtomatik tap谋lacaqd谋r.\n"
+"Olmazsa \"Uzaq CUPS vericisi\" ni se莽in."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Komp眉terinizi avtomatik olaraq X il蓹 a莽谋lmas谋 眉莽眉n qura bil蓹r蓹m.\n"
-"A莽谋l谋艧da X Window il蓹 ba艧lamaq ist蓹yirsiniz?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X il蓹 A莽谋l谋艧"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Qurulumdan sonra istifad蓹 ed蓹 bil蓹c蓹yiniz ba艧qa dill蓹r se莽蓹 bil蓹rsiniz"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 s眉r眉c眉: %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS sah蓹si"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "脺mumi yadda艧 miqdar谋 (%d MB tap谋ld谋)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "R蓹ng d蓹rinliyi: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Dns xidm蓹tcisi 2 (arzuya g枚r蓹)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ekran kart谋 yadda艧谋: %s KB\n"
+msgid "Boot device"
+msgstr "A莽谋l谋艧 avadanl谋臒谋"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Ekran kart谋: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Hans谋 b枚lm蓹nin b枚y眉kl眉y眉n眉 d蓹yi艧dir蓹c蓹ksiniz?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun 脺f眉qi Yenil蓹m蓹si: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Birl蓹艧mi艧 艦tatlar yan谋 Ki莽ik Adalar"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun 艦aquli Daramas谋: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Qeydl蓹riniz蓹 baxan vasit蓹"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Cibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Si莽an avadanl谋臒谋: %s\n"
+msgid "detected on port %s"
+msgstr "%s qap谋s谋nda tap谋ld谋"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Si莽an n枚v眉: %s\n"
+msgid "LPD"
+msgstr ""
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura d眉z眉l眉艧眉: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Ekran kart谋: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Se莽蓹n蓹kl蓹r: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "Ba臒lama n枚qt蓹si: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Server: "
-msgstr "Verici"
+msgid "Splash selection"
+msgstr "Paket se莽kil蓹rini saxla"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr ""
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
+msgid "Extended partition not supported on this platform"
+msgstr "Bu platformda geni艧l蓹dilmi艧 b枚lm蓹l蓹r d蓹st蓹kl蓹nmir"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Ba臒lama n枚qt蓹si"
+msgid "ISDN Configuration"
+msgstr "ISDN qura艧d谋r谋lmas谋"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Y眉ks蓹k"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Verici"
+msgid "Internet Connection Sharing"
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Ba臒la"
+msgid "Choose file"
+msgstr "Fayl se莽"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Ay谋r"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Diqq蓹t! Var olan Firewall qur臒usu tap谋ld谋. Y眉kl蓹m蓹d蓹n sonra bir az 蓹l "
+"g蓹zdir蓹 bil蓹rsiniz."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New"
-msgstr "yeni"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerin蓹 ``%s'' i艧l蓹t"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "脟ap Edici Ba臒lant谋s谋"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "N枚v"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "S谋ravi PS2 脟蓹rxli Si莽an"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "茝vv蓹lc蓹 ``Ay谋r'-谋 i艧l蓹t"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Sil"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Ekran kart谋n谋z谋 se莽in"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "Yarat"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "N枚vb蓹ni sil"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Fayl sistemi n枚v眉:"
+msgid "French Southern Territories"
+msgstr "C蓹nubi Frans谋z Sah蓹l蓹ri"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Bo艧"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "NIS sah蓹si"
+msgid "the vendor name of the processor"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "All data on this partition should be backed-up"
+msgstr "Bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar yed蓹kl蓹nm蓹lidir"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Installing package %s"
+msgstr "%s paketi qurulur"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "ba臒lama iflas etdi"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Yerli 脟ap Edici"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "Art谋q b枚lm蓹 yaratmaq 眉莽眉n, bir b枚lm蓹ni silib m蓹ntiqi b枚lm蓹 yarad谋n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"T蓹k bir b枚y眉k disk b枚lm蓹niz var\n"
-"(蓹sas蓹n MS DOS/Windows istifad蓹 ed蓹r).\n"
-"茝vv蓹lc蓹 bu disk b枚lm蓹sinin b枚y眉kl眉y眉n眉 d蓹yi艧dirm蓹yinizi\n"
-"t枚vsiy蓹 edirik. 茝vv蓹lc蓹 b枚lm蓹nin 眉st眉n蓹, sonra \"B枚y眉kl眉y眉\n"
-"D蓹yi艧dir\" d眉ym蓹sin蓹 t谋qlay谋n"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Monitorunuzu se莽in"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Sehirbaz"
+msgid "Choose packages to install"
+msgstr "Qurulacaq paketl蓹ri se莽in"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Aboot istifad蓹 etm蓹yi ist蓹yirsinizs蓹, bo艧 disk sah蓹si (2048 sektor b蓹sdir.)\n"
-"buraxmay谋 unutmay谋n."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "茝vv蓹lc蓹 datan谋z谋n yed蓹yini al谋n"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"%s b枚l眉m蓹sinin b枚y眉kl眉y眉 d蓹yi艧dirildikd蓹n sonra bu b枚lm蓹d蓹ki b眉t眉n "
+"m蓹'lumatlar silin蓹c蓹kdir"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Diqq蓹tl蓹 Oxuyun!"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Sisteminizd蓹 qurulum ya da g眉nc蓹ll蓹m蓹 眉莽眉n laz谋mi bo艧 yer yoxdur(%d > %d)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Encryption key"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Parollar uy臒un g蓹lmir"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bhutan"
+msgstr "Butan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "艦蓹b蓹k蓹 ara 眉z眉"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parol 莽ox sad蓹dir (en az %d xarakter boyunda olmal谋d谋r)"
+msgid "Reading printer data..."
+msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
+msgid "Korean keyboard"
+msgstr "Koreya klaviaturas谋"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi n枚v眉: "
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Not connected"
+msgstr "Ba臒l谋 deyil"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Type: "
-msgstr "N枚v: "
+msgid "Greek"
+msgstr "Yunanca"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "%d data yolunda, %d n枚'li\n"
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "B枚lm蓹 c蓹dv蓹li n枚v眉: %s\n"
+msgid "Saint Kitts and Nevis"
+msgstr "M眉q蓹dd蓹s Kit v蓹 Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskl蓹ri %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "M蓹'lumat: "
+msgid "Enable OF Boot?"
+msgstr "OF A莽谋l谋艧谋 F蓹alla艧d谋r谋m?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyas谋: %s silindr, %s ba艧, %s sektor\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "16MB d蓹n ki莽ik disk b枚lm蓹l蓹rind蓹 JFS istifad蓹 etm蓹lisiniz"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "B枚y眉kl眉k: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitorun 脺f眉qi Yenil蓹m蓹si: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read-only"
+msgid "path"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Device: "
-msgstr "Avadanl谋q: "
+msgid "Mount point"
+msgstr "Ba臒lama n枚qt蓹si"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"\n"
-"Bu, ikili a莽谋l谋艧 眉莽眉n x眉susi\n"
-"Bootstrap-d谋r.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Sistemi qur"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"\n"
-"B蓹lk蓹 d蓹 bu bir S眉r眉c眉 b枚lm蓹sidir.\n"
-"Onda bunu ele bel蓹c蓹 burax谋n.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback fayl谋 ad谋: %s"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskl蓹ri %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "陌nternet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Par莽a b枚y眉kl眉y眉 %s\n"
+msgid "Drakbackup"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "S蓹viyy蓹 %s\n"
+msgid "Colombia"
+msgstr "Kolumbiya"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Ana a莽谋lma b枚lm蓹si\n"
-" (MS-DOS a莽谋l谋艧谋 眉莽眉n)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
+msgid "Plug'n Play"
msgstr ""
-"Loopback fayl谋:\n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Reunion"
+msgstr "Reyunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Ba臒l谋\n"
+msgid "Details"
+msgstr "茝trafl谋"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "艦蓹kill蓹ndirilm蓹mi艧\n"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "T蓹hl眉k蓹sizlik s蓹b蓹bi il蓹 indi ba臒lant谋 qopacaqd谋r."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Formatted\n"
-msgstr "艦蓹kill蓹ndirilmi艧\n"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d -d蓹n silindr %d-y蓹\n"
+msgid "Checking your system..."
+msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "脟ap Edici"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "B枚y眉kl眉y眉: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Ba艧lan臒谋c: sektor %s\n"
+msgid "Mongolia"
+msgstr "Monqolustan"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Ad: "
+msgid "Mounted\n"
+msgstr "Ba臒l谋\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS s眉r眉c眉 h蓹rfi: %s (sad蓹c蓹 t蓹xmini)\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X il蓹 A莽谋l谋艧"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Fayldan geri 莽a臒谋r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
+msgid "Encryption key for %s"
+msgstr "Parollar uy臒un g蓹lmir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Copying %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"portmapper, NFS ve NIS kimi protokollar t蓹r蓹find蓹n istifad蓹 edil蓹n RPC \n"
+"ba臒lant谋lar谋n谋 t蓹艧kilatland谋r谋r. Portmap vericisi RPC mexanizmini i艧l蓹d蓹n\n"
+"protokollarla xidm蓹t ed蓹n komp眉terl蓹rd蓹 qurulmal谋d谋r v蓹 i艧l蓹dilm蓹lidir."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Yeni b枚lm蓹l蓹r 眉莽眉n bo艧 sah蓹 yoxdur"
+msgid "Detected hardware"
+msgstr "Avadanl谋q m蓹'lumat谋na bax"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Mauritius"
+msgstr "Maurit"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Myanmar (Burmese)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
+msgid "Enabling swap partition %s"
+msgstr "艦蓹kill蓹ndiril蓹n b枚lm蓹: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Yeni b枚lm蓹l蓹r 眉莽眉n bo艧 sah蓹 yoxdur"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s b枚lm蓹si 艧蓹kill蓹ndirildikd蓹n sonra bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar "
-"silin蓹c蓹kdir"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "FAT b枚lm蓹si yoxdur ya da loopback 眉莽眉n laz谋mi yer burax谋lmay谋b"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qur臒ular谋n f蓹alla艧ma臒谋 眉莽眉n sistemi yenid蓹n ba艧latmal谋s谋n谋z"
+msgid "Armenian (old)"
+msgstr "Ermenic蓹 (k枚hn蓹) "
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s s眉r眉c眉s眉n眉n b枚lm蓹 c蓹dv蓹li disk蓹 yaz谋lacaq!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Bu paket yenil蓹nm蓹lidir\n"
-"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "N蓹c蓹 b枚lm蓹landirm蓹 ist蓹yirs蓹n?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqq蓹tl谋 olun: bu 蓹m蓹liyyat t蓹hl眉k蓹lidir."
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "chunk size"
-msgstr "par莽a b枚y眉kl眉y眉"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "level"
-msgstr "s蓹viyy蓹"
+msgid "%s formatting of %s failed"
+msgstr "%s 艧蓹kill蓹ndirilm蓹sind蓹 %s b枚lm蓹 x蓹tas谋"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "avadanl谋q"
+msgid "Partitioning failed: %s"
+msgstr "B枚lm蓹 c蓹dv蓹li n枚v眉: %s"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Various"
-msgstr ""
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Frans谋zca (Kanada/Quebec)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Modul se莽蓹n蓹kl蓹ri:"
+msgid "Upgrade"
+msgstr "G眉nc蓹ll蓹m蓹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vard谋r. 陌艧l蓹dilsin?"
+msgid "Workstation"
+msgstr "Masa 眉st眉"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Installing package %s\n"
+"%d%%"
msgstr ""
-"Fayl ba艧qa bir loopback t蓹r蓹find蓹n istifad蓹d蓹dir, ba艧qa\n"
-"birini se莽in"
+"%s paketi qurulur\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kyrgyzstan"
+msgstr "Q谋r臒谋z谋stan"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "H蓹qiqi ad谋"
+msgid "With basic documentation"
+msgstr "S蓹n蓹dl蓹r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Fayl sistemi n枚v眉: "
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anakron, periodik 蓹mr zamanlay谋c谋s谋"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "MB cinsind蓹n b枚y眉kl眉k: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Bir root disk b枚l眉m眉na ehtiyac谋n谋z var.\n"
+"Bunun 眉莽眉n ist蓹r m枚vcud bir disk b枚l眉m眉 眉z蓹rina t谋qlay谋n, \n"
+"ya da yeni birini ba艧dan yarad谋n. Sonra \"Ba臒lama \n"
+"N枚qt蓹si\"n蓹 g蓹lin va buray谋 '/' olaraq d蓹yi艧dirin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback fayl ad谋: "
+msgid "Proxy should be http://..."
+msgstr "V蓹kil verici http://... 艧蓹klind蓹 olmal谋d谋r."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "South Africa"
+msgstr "C蓹nubi Afrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk b枚lm蓹si loopback 眉莽眉n i艧l蓹dilm蓹z"
+msgid "Western Sahara"
+msgstr "Q蓹rbi Saxara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM ad谋?"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "yeni"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "陌nternet qur臒ular谋"
#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "Monitorunuzu se莽in"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "茝lav蓹 etm蓹k 眉莽眉n m枚vcud bir LVM se莽in"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "茝lav蓹 etm蓹k 眉莽眉n m枚vcud bir RAID se莽in"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "B枚lm蓹 da艧谋n谋r..."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving"
-msgstr "Da艧谋n谋r"
+msgid "Please test the mouse"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Dig蓹r"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Hans谋 sektora da艧谋maq ist蓹yirsiniz?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Hans谋 disk蓹 da艧谋maq ist蓹yirsiniz?"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Da艧谋"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "MB cinsind蓹n b枚y眉kl眉k: "
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Yeni b枚y眉kl眉k se莽in"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Bu paketi se莽蓹 bilm蓹zsiniz, 莽眉nki qurmaq 眉莽眉n yer 莽atm谋r."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "B枚y眉kl眉y眉n眉 D蓹yi艧dir"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s b枚lm蓹si b枚y眉kl眉y眉 d蓹yi艧dirildirkd蓹n sonra bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar "
-"silin蓹c蓹kdir"
+msgid "Dialing mode"
+msgstr "Y谋臒ma modu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar yed蓹kl蓹nm蓹lidir"
+msgid "File sharing"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Hans谋 b枚lm蓹 n枚v眉n眉 ist蓹yirsiniz?"
+msgid "Clean /tmp at each boot"
+msgstr "/tmp-i h蓹r a莽谋l谋艧da t蓹mizl蓹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi uclar谋 hesaplan谋r"
+msgid "Malawi"
+msgstr "Malavi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "%s avadanl谋臒谋n谋 haraya ba臒lamaq ist蓹yirsiniz?"
+msgid "Please choose your type of mouse."
+msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Bu disk b枚lm蓹si loopback 眉莽眉n istifad蓹 edildiyind蓹n 枚tr眉 ba臒lanma "
-"n枚qt蓹sind蓹n ayr谋la bilinmir.\n"
-"茝vv蓹lc蓹 loopback-谋 l蓹臒v edin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanl谋臒谋n谋 haraya ba臒lamaq ist蓹yirsiniz?"
+msgid "United Kingdom"
+msgstr "Birl蓹艧mi艧 Krall谋q"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "%s loopback avadanl谋臒谋n谋 haraya ba臒lamaq ist蓹yirsiniz?"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "i艧l蓹mir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "default"
+msgstr "蓹sas"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hans谋 dili ist蓹yirsiniz?"
+msgid "Indonesia"
+msgstr "陌ndoneziya"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Frans谋zca"
+
+#: ../../any.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "B枚lm蓹 n枚v眉n眉 D蓹yi艧dir"
+msgid "restrict"
+msgstr "m蓹hdudla艧d谋r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "al谋nmal谋"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"%s b枚lm蓹sinin n枚v眉n眉 d蓹yi艧dirdikd蓹n sonra, bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar "
-"silin蓹c蓹kdir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Senegal"
+msgstr "Seneqal"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Loopback fayl谋 艧蓹kill蓹ndirilir: %s"
+msgid "Command line"
+msgstr "Sah蓹(domain) ad谋"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "X眉susiyy蓹tl蓹r: "
+msgid "access to administrative files"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Ba艧lan臒谋莽 sektoru: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Yeni b枚lm蓹 yarat"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Loopback 眉莽眉n istifad蓹 et"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "RAIDi d蓹yi艧dir"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "LVMd蓹n ay谋r"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "RAIDd蓹n ay谋r"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "LVM蓹 蓹lav蓹 et"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "陌nternet蓹 ba臒lan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "RAID蓹 蓹lav蓹 et"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Fayldan geri 莽a臒谋r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "艦蓹kill蓹ndir"
+msgid "TV card"
+msgstr "TV kart谋"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "M蓹'lumat谋 g枚st蓹r"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "B枚lm蓹 c蓹dv蓹li qurtar谋lma臒a c蓹hd edilir"
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Disket s眉r眉c眉y蓹 bir disket yerl蓹艧dirin\n"
-"Bu disketd蓹ki b眉t眉n m蓹'lumatlar yox olacaqd谋r"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "X蓹b蓹rdarl谋q"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "N枚vb蓹ni sil"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Posfix, elektronik m蓹ktublar谋n bir komp眉terd蓹n dig蓹rin蓹 yollayan \n"
+"Elektronik M蓹ktub Yollama Vasit蓹sidir."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Select file"
-msgstr "Fayl se莽"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-"Yed蓹k b枚lm蓹 c蓹dv蓹li eyni b枚y眉kl眉y蓹 sahib deyil\n"
-"Davam etm蓹k ist蓹yirsiniz?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Tax谋l谋b s枚k眉l蓹 bil蓹n avadanl谋qlar谋n avtomatik ba臒lanmas谋"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
+msgid "Network Hotplugging"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
+msgid "Restore From CD"
+msgstr "Disketd蓹n geri 莽a臒谋r"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "B枚lm蓹 c蓹dv蓹lini yaz"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Komp眉ter谋n谋zi 陌nternet ba臒lant谋s谋n谋 b枚l眉艧d眉rm蓹k 眉莽眉n qura艧d谋r谋rs谋n谋z.\n"
+"Bu se莽蓹n蓹kl蓹 yerli 艧蓹b蓹k蓹nizd蓹ki ba艧qa komp眉terl蓹r sizin 陌nternet "
+"ba臒lant谋n谋zdan faydalana bil蓹c蓹kl蓹r.\n"
+"\n"
+"X蓹b蓹darl谋q: Yerli 艦蓹b蓹k蓹 (LAN) qurmaq 眉莽眉n uy臒un 艦蓹b蓹k蓹 Adapterin蓹 "
+"ehtiyac谋n谋z var."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Art谋q b枚lm蓹 yaratmaq 眉莽眉n, bir b枚lm蓹ni silib m蓹ntiqi b枚lm蓹 yarad谋n"
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "陌nternet蓹 ba臒lanmaq 眉莽眉n 艧蓹b蓹k蓹 adapteri se莽in."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Art谋q b枚lm蓹 蓹lav蓹 edil蓹 bilm蓹z"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "B眉t眉n birinci b枚lm蓹l蓹r istifad蓹d蓹dir"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Sabit disk se莽kisi"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si indi ba臒land谋"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Avtomatik ay谋r"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Ham谋s谋n谋 t蓹mizl蓹"
+msgid "Latin American"
+msgstr "Lat谋n Amerika dili"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "B枚lm蓹 c蓹dv蓹lini qeyd etm蓹d蓹n 莽谋x谋rs谋n谋z?"
+msgid "Japanese text printing mode"
+msgstr "艦蓹b蓹k蓹ni qur"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Qeyd etm蓹d蓹n 脟谋x"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Fayl se莽"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
+msgid "Info: "
+msgstr "M蓹'lumat: "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Usta moduna ke莽"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Se莽蓹n蓹kl蓹r: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Normal moda ke莽"
+msgid "Please wait"
+msgstr "Xahi艧 edirik g枚zl蓹yin"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Monitorunuzu se莽in"
+msgid "None"
+msgstr "Qurtard谋"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Yeni b枚lm蓹 yarat"
+msgid "The entered IP is not correct.\n"
+msgstr "Do臒rudur?"
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "B枚lm蓹 n枚v眉n眉 D蓹yi艧dir"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Ethernet Card"
+msgstr "Eternet Kart谋"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS verici"
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Info"
+msgstr "M蓹'lumat"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS sah蓹si"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Qurulum"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Username"
-msgstr "陌stifad蓹莽i ad谋"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
+"S眉r眉c眉d蓹ki b眉t眉n bilgil蓹ri v蓹 b枚lm蓹l蓹ri silm蓹k 眉莽眉n\n"
+"\"Oldu\" d眉ym蓹sin蓹 bas谋n. Diqq蓹tli olun,\"Oldu\" d眉ym蓹sin蓹 basd谋qdan sonra\n"
+"Windows bilgil蓹ri d蓹 daxil olmaq 眉z蓹r蓹b眉t眉n b枚lm蓹 m蓹'lumat谋 geri d枚nm蓹y蓹c蓹k "
+"艧蓹kild蓹 silin蓹c蓹k.\n"
+"\n"
+"\n"
+"B枚lm蓹d蓹ki m蓹'lumatlar谋 qoruyaraq \"L蓹臒v et\" d眉ym蓹sin蓹\n"
+"蓹m蓹liyyat谋 l蓹臒v ed蓹 bil蓹rsiniz."
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Tan谋tma"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "陌nternet"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "陌stifad蓹莽i ad谋"
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Qurulumdan 莽谋x"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
+"H蓹r 艧ey quruldu.\n"
+"陌ndi is蓹 陌nternet ba臒lant谋n谋z谋 yerli 艧蓹b蓹k蓹d蓹k谋 ba艧qa komp眉terl蓹r il蓹 "
+"b枚l眉艧d眉r蓹 bil蓹rsiniz, bunun 眉莽眉n is蓹 avtomatik 艧蓹b蓹k蓹 qura艧d谋r谋lmas谋 (DHCP) "
+"i艧l蓹dilir."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "cpu # "
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Uzaq CUPS vericisi"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Si莽an"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USB controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
+"Sistemnizd蓹 bir d蓹n蓹 qurulmu艧 艧蓹b蓹k蓹 adapteri var:\n"
+"\n"
+"%s\n"
+"\n"
+"Yerli 艦蓹b蓹k蓹 adapterinizi qurmaq 眉z蓹r蓹y蓹m?"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "Qurulumdan 莽谋x"
+
+#: ../../lang.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Ethiopia"
+msgstr "Efiopiya"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "脺mumi b枚y眉kl眉k: %d / %d Mb"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Ekran kart谋n谋z谋 se莽in"
+msgid "disabled"
+msgstr "passivl蓹艧dir"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "脺mumi"
+msgid "Search for new scanners"
+msgstr "Yerli 脟ap Edici"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Si莽an"
+msgid "Disabling servers..."
+msgstr "Vericil蓹r ba臒lan谋r..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Eternet Kart谋"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s qurulumu iflas etdi. Olan x蓹ta:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Webcam"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "S蓹s kart谋"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"bu vericil蓹ri se莽diniz: %s\n"
+"\n"
+"\n"
+"bu vericil蓹r 蓹sas蓹n f蓹alla艧d谋r谋l谋r. Onlar谋n he莽 bir t蓹hl眉k蓹sizlik\n"
+"probleml蓹ri yoxdur, amma b蓹'zi x蓹talar tap谋la bil蓹r. Bel蓹 olsa, m眉m眉k眉n olan "
+"蓹n yax谋n zamanda g眉nc蓹ll蓹m蓹lisiniz.\n"
+"\n"
+"\n"
+"Bu vericil蓹ri qurmaq ist蓹yirsiniz?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Dig蓹r"
+msgid "Network printer (TCP/Socket)"
+msgstr "艦蓹b蓹k蓹 脟ap Edicisi (soket) "
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV kart谋"
+msgid "Backup User files..."
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Ekran modu"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Sistemi qur"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Tape"
-msgstr "N枚v"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Birinci DNS Vericisi (arzuya g枚r蓹)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DVD-ROM"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "Qura艧d谋r谋l谋r..."
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Qura艧d谋rma art谋q qurtar谋bd谋r, amma f蓹aliyy蓹ti dayand谋r谋l谋b."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CDROM"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "LILO/grup Qurulumu"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr "陌srail"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Disk"
-msgstr "Danimarka dili"
+msgid "load setting"
+msgstr "艦蓹kill蓹ndirilir"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Disket蓹 qeyd et"
+msgid "Truly minimal install"
+msgstr "Qurulumdan 莽谋x"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr ""
+msgid "Denmark"
+msgstr "Danimarka"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "B枚lm蓹 da艧谋n谋r..."
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "S眉r眉c眉"
+msgid "(This) DHCP Server IP"
+msgstr "CUPS verici IP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "Qur臒ular谋n s谋na臒谋"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "%s paketi qurulur"
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr ""
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "Sierra Leone"
+msgstr "Siera Lione"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr ""
+msgid "Botswana"
+msgstr "Botsvana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (茝sas)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "Alternative test page (Letter)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No open source driver"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Bir X vericisi se莽in"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "L眉td蓹n G枚zl蓹yin... Qur臒ular 蓹lav蓹 edilir"
+msgid "Swap partition size in MB: "
+msgstr "Swap sah蓹si b枚y眉kl眉y眉 (Mb): "
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Trouble shooting"
+msgid "Formatted\n"
+msgstr "艦蓹kill蓹ndirilmi艧\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"- Daemon (%s) include:\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+msgid "%d comma separated numbers"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"rusers protokolu bir 艧蓹b蓹k蓹d蓹k谋 istifad蓹莽il蓹rin o 艧蓹b蓹k蓹d蓹k谋 komp眉terl蓹rd蓹\n"
+"i艧l蓹y蓹n istifad蓹莽il蓹ri g枚rm蓹sin蓹 imkan ver蓹r."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+msgid "Automatic Steps Configuration"
+msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr ""
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to backup..."
+msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "enable radio support"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
+msgid "received"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_New"
+msgstr "/Fayl/_T蓹ze"
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "艦蓹kill蓹ndirilir"
+msgid "The DNS Server IP"
+msgstr "CUPS verici IP"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "High"
+msgstr "Y眉ks蓹k"
+
+#: ../../any.pm:1
+#, c-format
+msgid "NoVideo"
+msgstr "NoV陌deo"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "B枚lm蓹 n枚v眉n眉 D蓹yi艧dir"
+msgid "Local Printers"
+msgstr "Yerli 脟ap Edici"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Kart mem (DMA)"
+msgid "Installation image directory"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS Verici"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "脺mumi"
+msgid "Port: %s"
+msgstr "Qap谋"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "Spain"
+msgstr "陌spaniya"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Bu istifad蓹莽i ad谋 art谋q vard谋r"
-#: ../../harddrake/v4l.pm:1
+#: ../../interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+msgid "Choose a file"
+msgstr "Monitorunuzu se莽in"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "茝lav蓹 Et"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Qurtard谋"
+msgid "Auto-detect available ports"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Se莽kiniz? (蓹sas %s) "
+msgid "Internet Connection Sharing currently disabled"
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si passivl蓹艧dirildi"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "X蓹tal谋 t蓹rcih, t蓹krar s谋nay谋n\n"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Re-submit"
-msgstr ""
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Belgium"
+msgstr "Bel莽ika dili"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
+msgid "Kuwait"
+msgstr "K眉veyt"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "陌stifad蓹 etm蓹k ist蓹diyiniz p蓹nc蓹r蓹 idar蓹莽isini se莽in:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Se莽kiniz? (蓹sas %s) "
+msgid "First Time Wizard"
+msgstr "陌lk D蓹f蓹 Sehirbaz谋na Xo艧 G蓹ldiniz"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"Bir x蓹ta oldu, f蓹q蓹t nec蓹 d眉z蓹ldil蓹c蓹yini bilmir蓹m.\n"
+"Davam edin, riski siz蓹 aitdir!"
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "aboot istifad蓹 etm蓹k ist蓹yirsiniz?"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Se莽蓹n蓹kl蓹r: %s"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "xahi艧 edirik, g枚zl蓹yin, fayl daran谋r: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Se莽kiniz? (蓹sas %s) "
+msgid "Taiwan"
+msgstr "Tayland"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"%s modulunun y眉kl蓹nm蓹si iflas etdi.\n"
-"Yenid蓹n ba艧qa bir parametr il蓹 s谋namaq ist蓹yirsiniz?"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Burax谋l谋艧: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Specify options"
-msgstr "Se莽蓹n蓹kl蓹ri g枚st蓹r"
+msgid "Provider name (ex provider.net)"
+msgstr "陌nternet xidm蓹t vericinizin ad谋 (m蓹s蓹l蓹n azeronline.com)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
+msgid "Version: %s\n"
+msgstr "Burax谋l谋艧: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"B蓹zi hallarda, %s s眉r眉c眉 d眉zg眉n i艧l蓹m蓹si 眉莽眉n 蓹lav蓹 m蓹'lumat ist蓹y蓹 bil蓹r.\n"
-"S眉r眉c眉ler 眉莽眉n 蓹lav蓹 bir x眉susiyy蓹t g枚st蓹rm蓹k mi ist蓹y蓹rsiniz, yoxsa\n"
-"s眉r眉c眉l蓹rin laz谋mi m蓹'lumatlar 眉莽眉n avadal谋臒谋 tan谋mas谋n谋 m谋 ist蓹y蓹rsiniz? \n"
-"B蓹'z蓹n tan谋mlama komp眉terinizi dondura bil蓹r amma dondu臒u 眉莽眉n\n"
-"komp眉teriniz蓹 he莽 bir 艧ey olmaz."
+"Sizin sisteminizin qaynaqlar谋 莽at谋艧m谋r. Qurulum 蓹rzind蓹 problem ya艧aya "
+"bil蓹rsiniz\n"
+"Bu ba艧 ver蓹rs蓹 m蓹tn arac谋l谋臒谋 il蓹 qurulumu s谋namal谋s谋n谋z. Bunun 眉莽眉n "
+"d蓹CDROMdan ba艧latd谋臒谋n谋z zaman,\n"
+" 'F1'蓹 bas谋n v蓹 'text' yazaraq enter'蓹 bas谋n."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hans谋 %s s眉r眉c眉s眉 s谋nans谋n?"
+msgid "Use the Windows partition for loopback"
+msgstr "Loopback 眉莽眉n Windows b枚lm蓹sini i艧l蓹t"
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modul se莽蓹n蓹kl蓹ri:"
+msgid "Armenian (typewriter)"
+msgstr "Ermenic蓹 (yaz谋 ma艧谋n谋)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"陌st蓹s蓹niz indi %s modulunun parametrl蓹rini g枚st蓹r蓹 bil蓹rsiniz.\n"
-"Parametrl蓹r``ad=qiym蓹t ad2=qiym蓹t2...'' 艧蓹klind蓹 olmal谋d谋r.\n"
-"M蓹s蓹l蓹n ``io=0x300 irq=7''"
+msgid "Connection type: "
+msgstr "Ba臒lant谋 n枚v眉:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "X il蓹 A莽谋l谋艧"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "3D avadanl谋q s眉r'蓹tl蓹ndirm蓹si il蓹 XFree %s"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kart谋 (%s) 眉莽眉n s眉r眉c眉 y眉kl蓹nir"
+msgid "India"
+msgstr "Hindistan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Avadanl谋q m蓹'lumat谋na bax"
+msgid "Chad"
+msgstr "脟ad"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "He莽 %s ara 眉z眉 var?"
+msgid "Slovakia"
+msgstr "Slovakiya"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Ba艧qa var?"
+msgid "Singapore"
+msgstr "Sinqapur"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara 眉z眉 tap谋ld谋"
+msgid "Cambodia"
+msgstr "Kambodiya"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "B枚lm蓹 艧蓹kill蓹ndirilm蓹si"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitorun 艦aquli Daramas谋: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Path"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "Telefon n枚mr蓹si"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"ADSL il蓹 internet蓹 ba臒lanman谋n 蓹n yax艧谋 yolu pppoe'dur.\n"
-"B蓹zi ba臒lant谋lar pptp istifad蓹 edir, 莽ox az谋 is蓹 dhcp i艧l蓹dir.\n"
-"Bilmirsiniz is蓹 'pppop istifad蓹 et'i se莽in"
-
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "陌nternet蓹 ba臒lan"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid "China (broadcast)"
msgstr ""
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use dhcp"
-msgstr "dhcp istifad蓹 et"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pptp"
-msgstr "pptpe istifad蓹 et"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "pppoe istifad蓹 et"
-
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Qap谋lar谋 s谋na"
+msgid "Use quota for backup files."
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "脟ap Edicini Qur"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Internet connection"
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
+"%s modulunun y眉kl蓹nm蓹si iflas etdi.\n"
+"Yenid蓹n ba艧qa bir parametr il蓹 s谋namaq ist蓹yirsiniz?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
+msgid "Bosnia and Herzegovina"
+msgstr "Bosniya v蓹 Herzoqovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz 眉莽眉n 艧蓹xsi bir firewall qura艧d谋racaqd谋r.\n"
-"Daha g眉cl眉 v蓹 e'tibarl谋 sistem 眉莽眉n xahi艧 edirik x眉susi MandrakeSecurity "
-"Firewall\n"
-"burax谋l谋艧谋n谋 t蓹dqiq edin."
+"Bu ba臒lama n枚qt蓹si 眉莽眉n h蓹qiqi bir fayl sistemin蓹 (ext2, reisrfs)\n"
+"ehtiyac vard谋r.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "No network card"
-msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "Verici"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Netherlands"
+msgstr "Hollandiya"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Databeyz"
+msgid "Sending files by FTP"
+msgstr "Fayla qeyd et"
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Sah蓹(domain) ad谋"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr "Daxili ISDN kart"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Verici"
+msgid "Title"
+msgstr "C蓹dv蓹l"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Ev sahibi ad谋"
+msgid "WARNING"
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Ev sahibi ad谋"
+msgid "Installing bootloader"
+msgstr "Sistem y眉kl蓹yicini qur"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "T蓹krarla"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "艦蓹b蓹k蓹 Qur臒ular谋"
+msgid "detected %s"
+msgstr "%s tap谋ld谋"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "陌nternet蓹 ba臒lanmaq 眉莽眉n 艧蓹b蓹k蓹 adapteri se莽in."
+msgid "Virgin Islands (U.S.)"
+msgstr "Virgin Adalar谋 (AB艦)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "艦蓹b蓹k蓹 ara 眉z眉n眉 se莽in"
+msgid "Bad backup file"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Sisteminizd蓹 he莽 bir eternet 艧蓹b蓹k蓹 adapteri tap谋la bilm蓹di.\n"
-"Bu ba臒lant谋 艧蓹klini qura bilm蓹r蓹m."
+"陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si qurulmas谋 art谋q bitdi.\n"
+"V蓹 art谋q passivl蓹艧dirilmi艧dir.\n"
+"\n"
+"N蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Hans谋 dhcp al谋c谋s谋n谋 istifad蓹 ed蓹c蓹ksiniz?\n"
-"茝sas谋 dhcp-client dir"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "He莽 bir ISDN PCI kart tap谋lma谋. Sonrak谋 ekrandak谋lardan se莽in."
+msgid "Pipe into command"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"ISDN PCI kart tapd谋m, amma n枚v眉n眉 bilmir蓹m. Xahi艧 edirik sonrak谋 ekrandak谋 "
-"kartlardan birini se莽in."
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hans谋s谋 sizin ISDN kart谋n谋zd谋r?"
+"Sisteminizdaki b蓹'zi avadanl谋qlar i艧l蓹m蓹si 眉莽眉n d眉zg眉n s眉r眉c眉l蓹r蓹 ehtiyac "
+"duyar.\n"
+"Bunun haqq谋nda %s d蓹/a laz谋mi malumatlar谋 tapa bil蓹rsiniz"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN qura艧d谋r谋lmas谋"
+msgid "Detecting devices..."
+msgstr "Avadanl谋qlar tan谋n谋r..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Dayand谋r"
+msgid "Click here to launch the wizard ->"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Davam et"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
-"\n"
-"ISA kart谋n谋z var is蓹 sonrak谋 ekrandak谋 qiym蓹tl蓹r do臒ru olmal谋d谋r.\n"
-"\n"
-"PCMCIA kart谋n谋z var is蓹 kart谋n谋z谋n irq v蓹 ya io'sunu bilm蓹lisiniz.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Bilmir蓹m"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "the name of the CPU"
+msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hans谋 n枚v kart谋n谋z var?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "You must also format %s"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hans谋 protokolu istifad蓹 etm蓹k ist蓹yirsiniz?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Diqq蓹tl谋 olun: bu 蓹m蓹liyyat t蓹hl眉k蓹lidir."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "B眉t眉n d眉nya"
+msgid "Insert a floppy containing package selection"
+msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"B眉t眉n d眉nya \n"
-" D-Channel'l蓹 xaric (kiral谋q x蓹tl蓹r)"
+msgid "Server: "
+msgstr "Verici"
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "A莽谋l谋艧 Protokolu"
+msgid "Security Alerts:"
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
+msgid "Sweden"
+msgstr "陌sve莽c蓹"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "Use Expect for SSH"
msgstr ""
-"陌nternet xidm蓹t vericinizi se莽in.\n"
-"Siyah谋da deyils蓹 Siyah谋da deyil'i se莽in."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN ba臒lant谋n谋z谋n n枚v眉 n蓹dir?"
+msgid "Poland"
+msgstr "Pol艧a"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋 Sehirbaz谋"
+msgid "Importance: %s\n"
+msgstr "茝h蓹miyy蓹t: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) qurulu艧u tap谋ld谋!"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) qurulu艧u tap谋ld谋!"
+msgid "Other ports"
+msgstr "Qap谋lar谋 s谋na"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "amma ox艧am谋r"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Qurulum"
-
-#: ../../network/modem.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgid "SMBus controllers"
msgstr ""
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Title"
-msgstr "C蓹dv蓹l"
+msgid "Connection timeout (in sec)"
+msgstr "Ba臒lant谋 n枚v眉:"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "陌kinci DNS Vericisi (arzuya g枚r蓹)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya g枚r蓹)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "Sah蓹(domain) ad谋"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Skript 蓹sasl谋"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal 蓹sasl谋"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Croatian"
+msgstr "X谋rvatca"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Giri艧 ad谋"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Var olan b枚lm蓹l蓹ri i艧l蓹dimmi"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "Telefon n枚mr蓹si"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Fork edil蓹 bilmir: %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Connection name"
-msgstr "Ba臒lant谋 ad谋"
+msgid "/Help/_About..."
+msgstr "/K枚m蓹k/_Haqq谋nda..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialup options"
-msgstr "脟evirm蓹li 艧蓹b蓹k蓹 se莽蓹n蓹kl蓹ri"
+msgid "Remove user directories before restore."
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "陌nternet qur臒ular谋"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+msgid "F00f bug"
msgstr ""
-"Bu edildikd蓹n sonra Xd蓹n 莽谋xma臒谋n谋z谋 t枚vsiyy蓹 edirik, yoxsa\n"
-"verici ad谋 x蓹sar蓹tl蓹ri meydana g蓹l蓹 bil蓹r."
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"T蓹brik edirik, internet v蓹 艧蓹b蓹k蓹 qura艧d谋r谋lmas谋 qurtard谋.\n"
-"\n"
-"Qur臒ular indi sisteminiz蓹 蓹lav蓹 edil蓹c蓹k.\n"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"艦蓹b蓹k蓹nin yenid蓹n ba艧lad谋lmas谋 s谋ras谋nda x蓹ta oldu: \n"
-"\n"
-"%s"
+"Hans谋 dhcp al谋c谋s谋n谋 istifad蓹 ed蓹c蓹ksiniz?\n"
+"茝sas谋 dhcp-client dir"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Bu paket yenil蓹nm蓹lidir\n"
-"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+msgid "Domain Name:"
+msgstr "Sah蓹(domain) ad谋"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ba臒lant谋n谋z谋 a莽谋l谋艧da ba艧latmaq ist蓹yirsiniz?"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Disket蓹 qeyd et"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si"
+msgid "Restore"
+msgstr "Fayldan geri 莽a臒谋r"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "陌stifad蓹 ed蓹c蓹yiniz vasit蓹ni se莽in"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages..."
+msgstr "M枚vcud olan paketl蓹r axtar谋l谋r."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tap谋ld谋"
+msgid "Init Message"
+msgstr "陌nit 陌smar谋c谋"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+msgid "Rescue partition table"
+msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Kabel ba臒lant谋s谋"
+msgid "Connection complete."
+msgstr "Ba臒lant谋 n枚v眉:"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabel ba臒lant谋s谋"
+msgid "Cyprus"
+msgstr "Kipr (Yunan v蓹 T眉rk) "
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "%s tap谋ld谋"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Remove from RAID"
+msgstr "RAIDd蓹n ay谋r"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Bu parol 莽ox sad蓹dir (en az %d xarakter boyunda olmal谋d谋r)"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected %s"
-msgstr "%s tap谋ld谋"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋 Sehirbaz谋"
#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "ISDN Ba臒lant谋s谋"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normal modem t蓹sbiti"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "detected on port %s"
-msgstr "%s qap谋s谋nda tap谋ld谋"
+msgid "primary"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normal modem t蓹sbiti"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Detecting devices..."
-msgstr "Avadanl谋qlar tan谋n谋r..."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"陌ndi, a莽谋l谋艧da avtomatik olaraq ba艧lamas谋n谋 ist蓹diyiniz xidm蓹tl蓹ri \n"
+"se莽蓹 bil蓹rsiniz. Si莽an bir madd蓹nin 眉z蓹rina g蓹ldiyind蓹 o xidm蓹tin rolunu "
+"a莽谋qlayan\n"
+"ki莽ik bir baloncuq ortaya 莽谋xacaqd谋r.\n"
+"\n"
+"茝g蓹r komp眉terinizi bir verici olaraq istifad蓹 ed蓹c蓹ks蓹niz bu add谋mda tam bir "
+"diqq蓹t ay谋rmal谋s谋n谋z:\n"
+"m眉ht蓹m蓹ldir ki laz谋mi he莽 bir xidm蓹ti ba艧latmaq ist蓹m蓹zsiniz."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Usta Modu"
+msgid "Skip"
+msgstr "N蓹z蓹r蓹 Alma"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+msgid "Niue"
+msgstr "Niu"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili se莽in"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"A莽谋l谋艧 s谋ras谋nda ba艧lamaq 眉莽眉n qurulmu艧 b眉t眉n 艧蓹b蓹k蓹 axtar 眉zl蓹rini "
+"f蓹alla艧d谋r谋r ya da qapat谋r."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"艦蓹b蓹k蓹 Qura艧d谋rma Sehirbaz谋na Xo莽 G蓹ldiniz\n"
-"\n"
-"陌nternet/艦蓹b蓹k蓹 qur臒ular谋n谋z谋 ed蓹c蓹yik.\n"
-"Avtomatik t蓹sbit ist蓹mirsiniz is蓹 i艧ar蓹ti qald谋r谋n.\n"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "important"
+msgstr "vacib"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Total Progress"
msgstr ""
-"艦蓹b蓹k蓹d蓹n qura艧d谋rmas谋 apard谋臒谋n谋z 眉莽眉n 艧蓹b蓹k蓹niz art谋q qurulmu艧 olmal谋d谋r.\n"
-"艦蓹b蓹k蓹/陌nternet ba臒lant谋n谋z谋 yenid蓹n qura艧d谋rmaq 眉莽眉n Oldu'ya yoxsa L蓹臒v "
-"et'蓹 bas谋n.\n"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX PCI SCSI adapterleri axtarma臒a c蓹hd ed蓹c蓹k. 茝g蓹 DrakX SCSI\n"
+"taparsa v蓹 hans谋 s眉r眉c眉 i艧l蓹dil蓹c蓹yini bil蓹rs蓹, her 艧ey 枚z 枚z眉n蓹\n"
+"qurulacaq.\n"
"\n"
"\n"
-"Press OK to continue."
-msgstr ""
+"茝g蓹r sisteminizd蓹 SCSI adapteri yoxsa, DrakXin tan谋mayaca臒谋 bir\n"
+"ISA SCSI v蓹 ya PCI SCSI adapteri var is蓹, siz蓹 sisteminizd蓹 SCSI\n"
+"adapteri olub olmad谋臒谋 soru艧ulacaq.\n"
+"茝g蓹r SCSI adapteriniz yox is蓹, \"Yox\" t谋qlay谋n. 茝g蓹r \"Var\"谋 "
+"t谋qlayarsan谋z.\n"
+"qar艧谋n谋za s眉r眉c眉l蓹in siyah谋s谋 莽谋xacaq, oradan siz蓹 uyan谋n谋 se莽蓹rsiniz.\n"
"\n"
-"Ba臒lant谋n谋z谋 k蓹s蓹 bil蓹rsiniz. Ya da ba臒lant谋n谋 yenid蓹n d蓹 qura艧d谋ra "
-"bil蓹rsiniz."
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
"\n"
-"Ba臒lant谋n谋z谋 k蓹s蓹 bil蓹rsiniz. Ya da ba臒lant谋n谋 yenid蓹n d蓹 qura艧d谋ra "
-"bil蓹rsiniz."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "陌nternet ba臒lant谋s谋 & qura艧d谋r谋lmas谋"
+"茝g蓹r 蓹ll蓹 qurma臒谋 s蓹莽蓹rs蓹niz, o zaman DrakX siz蓹 adapterin x眉susiyy蓹tl蓹rini\n"
+"soru艧acaq. 陌mkan verin ki, DrakX s蓹rb蓹stc蓹 枚z眉 x眉susiyy蓹tl蓹ri taps谋n.\n"
+"脟oxunda bu i艧蓹 yaray谋r.\n"
+"\n"
+"\n"
+"茝g蓹r ist蓹mirs蓹niz is蓹, o zaman adapter 眉莽眉n x眉susiyy蓹tl蓹ri 枚z眉n眉z\n"
+"g枚st蓹rm蓹lisiniz. Bunun 眉莽眉n 陌stifad蓹莽inin 茝l Kitab莽as谋na\n"
+"(ba艧l谋q 3, \"Avadanl谋臒谋n谋z 眉莽眉n kollektiv m蓹'lumat) b枚lm蓹sin蓹\n"
+"bax谋n. Ya da avadanl谋臒谋n谋z谋n 蓹l kitab莽as谋ndan v蓹 ya\n"
+"veb s蓹hif蓹sind蓹n (茝g蓹r internet蓹 莽谋x谋艧谋n谋z var is蓹)\n"
+"ya da Microsoft Windowsdan (茝g蓹r sisteminizd蓹 qurulu is蓹)\n"
+"m蓹'lumat al谋n."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "艦蓹b蓹k蓹ni qur"
+msgid "Users"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Ba臒lant谋n谋 k蓹s"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Ba臒lan"
+msgid "Preparing bootloader..."
+msgstr "A莽谋l谋艧 y眉kl蓹yici haz谋rlan谋r"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
+msgid "Gateway (e.g. %s)"
msgstr ""
-"\n"
-"Ba臒lant谋n谋z谋 yenid蓹n qura艧d谋ra bil蓹rsiniz."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "The passwords do not match"
+msgstr "Parollar uy臒un g蓹lmir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
msgstr ""
-"\n"
-"陌st蓹s蓹niz 陌nternet蓹 ba臒lana bil蓹rsiniz ya da yeniden qura艧d谋ra bil蓹rsiniz."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "H蓹l蓹 陌nternet蓹 ba臒l谋 deyilsiniz."
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"\n"
-"Ba臒lant谋n谋z谋 k蓹s蓹 bil蓹rsiniz. Ya da ba臒lant谋n谋 yenid蓹n d蓹 qura艧d谋ra "
-"bil蓹rsiniz."
+"Bu saxlanm谋艧 paketl蓹r se莽kisini i艧l蓹tm蓹k 眉莽眉n qurulumu ``linux "
+"defcfg=floppy''il蓹 ba艧lad谋n."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Art谋q 陌nternet蓹 ba臒l谋s谋n谋z."
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "V蓹kil verici http://... 艧蓹klind蓹 olmal谋d谋r."
+msgid "Hardware clock set to GMT"
+msgstr "Avadanl谋q saat谋n谋z GMT-y蓹 g枚ra quruludur mu?"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "H蓹qiqi ad谋"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "V蓹kil verici http://... 艧蓹klind蓹 olmal谋d谋r."
+msgid "Change Cd-Rom"
+msgstr "Cd-Romu d蓹yi艧dir"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP v蓹kil verici"
+msgid "Paraguay"
+msgstr "Paraqvay"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP v蓹kil verici"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "V蓹kil vericil蓹r qura艧d谋r谋lmas谋"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP 眉nvan谋 1.2.3.4 艧蓹klind蓹 olmal谋d谋r"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "force"
+msgstr "zorla"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP 眉nvan谋 1.2.3.4 艧蓹klind蓹 olmal谋d谋r"
+msgid "Exit"
+msgstr "Ext2"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Ke莽it avadanl谋臒谋"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
+"Qurulu ara 眉z眉n眉z yoxdure.\n"
+"茝vv蓹lc蓹 onlar谋 'Qura艧d谋r'a basaraq qurun"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS verici"
+msgid "Estonian"
+msgstr "Estoniya dili"
-#: ../../network/network.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Xahi艧 edirik komp眉terinizn ad谋n谋 girin.\n"
-"M蓹s蓹l蓹n``komp眉terad谋.sah蓹ad谋.com''.\n"
-"茝g蓹r 艧蓹b蓹k蓹 ke莽idi istifad蓹 edirsinizs蓹 bunun da IP n枚mr蓹sini girm蓹lisiniz."
+"Apache bir World Wide Web vericisidir. HTML fayllar谋 v蓹 CGI verilm蓹si 眉莽眉n "
+"istifad蓹 edilir."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Clients"
+msgstr "DHCP Al谋c谋s谋"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Choose the network interface"
+msgstr "艦蓹b蓹k蓹 ara 眉z眉n眉 se莽in"
+
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown Model"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "CD/DVD burners"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP 眉nvan谋 1.2.3.4 艧蓹klind蓹 olmal谋d谋r"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Ana a莽谋lma b枚lm蓹si\n"
+" (MS-DOS a莽谋l谋艧谋 眉莽眉n)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "A莽谋l谋艧da ba艧lad谋l谋r"
+msgid "choose image"
+msgstr "Monitorunuzu se莽in"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
+#: ../../network/shorewall.pm:1
+#, c-format
+msgid "Firewalling configuration detected!"
+msgstr "Oddan divar (Firewall) qurulu艧u tap谋ld谋!"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
+msgstr "Ba臒lant谋 ad谋"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Ev sahibi ad谋"
+msgid "Updating package selection"
+msgstr "Paket se莽kil蓹rini saxla"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "%s loopback avadanl谋臒谋n谋 haraya ba臒lamaq ist蓹yirsiniz?"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "IP address"
-msgstr "IP 眉nvan谋"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "the number of buttons the mouse has"
+msgstr "2 d眉ym蓹li"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic IP"
-msgstr "Avtomatla艧d谋r谋lm谋艧 IP"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (s眉r眉c眉 %s)"
+msgid "Replay"
+msgstr "T蓹krarla"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../install_steps.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "%s 艧蓹b蓹k蓹 avadanl谋臒谋 qurulur"
+msgid "No floppy drive available"
+msgstr "Disket s眉r眉c眉 yoxdur"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Xahi艧 edirik bu komp眉ter 眉莽眉n IP qur臒ular谋n谋 girin"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "TV norm:"
msgstr ""
-"D陌QQ茝T: Bu avadanl谋q daha 蓹vv蓹l 陌ntenet蓹 ba臒lanmaq 眉莽眉n qurulmu艧dur.\n"
-"Avadanl谋臒谋n qur臒ular谋n谋 d蓹yi艧dirma蓹k ist蓹mirsiniz is蓹,\n"
-"OLDU ya bas谋n.\n"
-"A艧a臒谋dak谋 giri艧l蓹ri d眉z蓹ltm蓹niz 枚z眉n眉 蓹vv蓹lki qur臒ular谋n 眉st眉n蓹 yazacaqd谋r."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cpuid family"
msgstr ""
-"Diqq蓹t! Var olan Firewall qur臒usu tap谋ld谋. Y眉kl蓹m蓹d蓹n sonra bir az 蓹l "
-"g蓹zdir蓹 bil蓹rsiniz."
-#: ../../network/shorewall.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) qurulu艧u tap谋ld谋!"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Hesap Parolu"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litvanya dili AZERTY (yeni)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Hesab Giri艧i (istifad蓹莽i ad谋)"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Ba臒lant谋 n枚v眉:"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Bir proqram t蓹'minatl谋 RAID b枚lm蓹sini k枚k qovlu臒u (/) olaraq t蓹'yin "
+"etdiniz.\n"
+"茝g蓹r lilo ya da grub istifad蓹 etm蓹k ist蓹yirsinizs蓹, bir /boot b枚lm蓹si\n"
+"蓹lav蓹 etm蓹yi unutmay谋n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Ba臒lant谋 n枚v眉:"
+msgid "Previous"
+msgstr "<- 茝vv蓹lki"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Y谋臒ma modu"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Klaviaturan谋z谋 se莽in"
+msgid "Other OS (MacOS...)"
+msgstr "Dig蓹r sisteml蓹r (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidm蓹tcisi 2 (arzuya g枚r蓹)"
+msgid "To activate the mouse,"
+msgstr "Si莽an谋n谋z谋 i艧蓹 salmaq 眉莽眉n,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidm蓹tcisi 1 (arzuya g枚r蓹)"
+msgid "Bringing up the network"
+msgstr "艦蓹b蓹k蓹 f蓹alla艧d谋r谋l谋r"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "陌XM telefon n枚mr蓹si"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "Qurulumdan sonra istifad蓹 ed蓹 bil蓹c蓹yiniz ba艧qa dill蓹r se莽蓹 bil蓹rsiniz"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "陌nternet xidm蓹t vericinizin ad谋 (m蓹s蓹l蓹n azeronline.com)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"S眉r眉c眉n眉zd蓹 bir v蓹 ya daha 莽ox Windows b枚lm蓹si tap谋ld谋.\n"
+"Xahi艧 edirik Linuks Mandrakeni qurmaq 眉莽眉n onlardan birini "
+"yenid蓹n枚l莽眉l蓹ndirm蓹k 眉z蓹r蓹 se莽in.\n"
+"\n"
+"\n"
+"X蓹b蓹riniz olsun, her b枚lm蓹 bu c眉r s谋ralan谋b; \"Linuks ad谋\",\"Windows\n"
+"ad谋\"\"H蓹cm\".\n"
+"\n"
+"\"Linuks ad谋\" bu c眉r kodlan谋b: \"s眉r眉c眉 n枚v眉\", \"s眉r眉c眉 n枚mr蓹si\",\"b枚lm蓹 "
+"n枚mr蓹si\" (m蓹s蓹l蓹n, \"hda\").\n"
+"\n"
+"\n"
+"\"S眉r眉c眉 n枚v眉\" s眉r眉c眉n眉z IDE s眉r眉c眉 is蓹 \"hd\"dirSCSI s眉r眉c眉 is蓹\n"
+"\"sd\"dir.\n"
+"\n"
+"\n"
+"\"S眉r眉c眉 n枚mr蓹si\" h蓹mi艧蓹 \"hd\" v蓹 ya \"sd\"d蓹n sonrak谋 r蓹q蓹mdir.IDE "
+"s眉r眉c眉l蓹r 眉莽眉n:\n"
+"\n"
+"*\"a\" y蓹ni \"birinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
+"\n"
+"*\"b\" y蓹ni \"birinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\",\n"
+"\n"
+"*\"c\" y蓹ni \"ikinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
+"\n"
+"*\"d\" y蓹ni \"ikinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\".\n"
+"\n"
+"\n"
+"SCSI s眉r眉c眉l蓹rind蓹 \"a\" n谋n m蓹nas谋 \"birinci s眉r眉c眉\",\n"
+"\"b\"nin m蓹nas谋 \"ikinci s眉r眉c眉\"d眉r vs..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Sizin 艧蓹xsi telefon n枚mr蓹niz"
+msgid "Tanzania"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kart IO_1"
+msgid "Computing FAT filesystem bounds"
+msgstr "Fat fayl sistemi uclar谋 hesaplan谋r"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kart IO_0"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card IO"
-msgstr "Kart IO"
+msgid "Content of the file"
+msgstr "Fayl m蓹zmunu"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication LDAP"
+msgstr "Tan谋tma"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kart IRQ"
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Xahi艧 edirik a艧a臒谋dak谋lar谋 doldurun ya da se莽in"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profil: "
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Ba臒lant谋 qura艧d谋r谋lmas谋"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "transmitted"
msgstr ""
-"Sisteminiz 陌nternet蓹 ba臒l谋 deyil.\n"
-"Ba臒lant谋n谋 yenid蓹n qura艧d谋r谋n"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "T蓹hl眉k蓹sizlik s蓹b蓹bi il蓹 indi ba臒lant谋 qopacaqd谋r."
-
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "陌nternet蓹 art谋q ba臒l谋s谋n谋z"
+msgid "Palestine"
+msgstr "Paket se莽kil蓹rini saxla"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Ba臒lant谋n谋z s谋nan谋r..."
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "陌nternete giri艧i indi s谋namaq ist蓹yirsiniz?"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "陌nternet qur臒ular谋"
+msgid "Here is the full list of keyboards available"
+msgstr "B眉t眉n m枚vcud klaviaturalar谋n siyah谋s谋"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
+msgid "Theme name"
+msgstr "Payla艧d谋rma ad谋"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Help"
+msgstr "/_K枚m蓹k"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"B蓹'z蓹n s眉r眉c眉n眉zd蓹 pis 艧eyl蓹r ola bil蓹r.\n"
-"Datan谋n b眉t枚vl眉y眉 yoxlamas谋 bacar谋lmad谋. \n"
-"Bu o demekdir ki disk蓹 yaz谋lan h蓹r 艧ey t蓹sad眉fi olacaqd谋r"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " (Default)"
-msgstr " (茝sas)"
+msgid "the width of the progress bar"
+msgstr ""
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS verici IP"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cook Islands"
+msgstr "Kuku Adalar谋"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../fs.pm:1
+#, c-format
+msgid "Formatting partition %s"
+msgstr "艦蓹kill蓹ndiril蓹n b枚lm蓹: %s"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Uzaq 脟ap Edici"
+msgid "Hostname required"
+msgstr "Ev sahibi ad谋:"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "CUPS"
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "Cancel"
+msgstr "L蓹臒v et"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
+msgid "Searching for configured scanners ..."
+msgstr "Yerli 脟ap Edici"
-#: ../../printer/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "Wheel"
+msgstr "脟蓹rx"
-#: ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Videocard"
+msgstr "Ekran modu"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
+msgid "\tBackups use tar and bzip2\n"
msgstr ""
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "N枚vb蓹ni sil"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Uzaq 脟ap Edici"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
+"D陌QQ茝T!\n"
+"\n"
+"DrakX \"Windows\" disk b枚lm蓹nizin b枚y眉kl眉y眉n眉 d蓹yi艧dir蓹c蓹k. Bu i艧 \n"
+"tehl眉k蓹li ola bil蓹r. A艧ina deyil is蓹niz qurulumdan 莽谋x谋n v蓹 \"Windows\" \n"
+"alt谋nda \"Scandisk\" (laz谋m g蓹l蓹rs蓹 \"defrag\" da) proqram谋n谋 莽al谋艧d谋r谋n. "
+"Ard谋ndan quruluma \n"
+"davam edin. Veril蓹rinizin yed蓹yini alma臒谋 da unutmay谋n!"
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "PDQ"
-msgstr ""
+msgid "Other"
+msgstr "Dig蓹r"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Default"
+msgstr "茝sas"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Button 2 Emulation"
+msgstr "D眉ym蓹 2 emulyasiyas谋"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
+msgid "type1inst building"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Qap谋"
+msgid "Abiword"
+msgstr "Dayand谋r"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Ev sahibi ad谋"
+msgid "choose image file"
+msgstr "Monitorunuzu se莽in"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "X server"
+msgstr "X verici"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "艦蓹b蓹k蓹 ara 眉z眉"
+msgid "Domain Admin User Name"
+msgstr "Sah蓹(domain) ad谋"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Ara 眉z %s"
+msgid "There was an error while scanning for TV channels"
+msgstr "Paketl蓹r qurulurk蓹n bir x蓹ta oldu:"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard (international)"
+msgstr "Amerikan (US) klaviaturas谋 (beyn蓹lmil蓹l)"
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
+msgid "Not installed"
+msgstr "Qurulumdan 莽谋x"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "LAN connection"
+msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "/File/-"
+msgstr "/Fayl/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Italian"
+msgstr "陌talyanca"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "Basic"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "Honduras"
+msgstr "Honduras"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s fayl谋na yazark蓹n x蓹ta oldu"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO"
+msgstr "Kart IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
+"\n"
+"Bu, ikili a莽谋l谋艧 眉莽眉n x眉susi\n"
+"Bootstrap-d谋r.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "脟ap Edicisiz"
+msgid "You must enter a device or file name!"
+msgstr "脟ap Edici avadanl谋臒谋 URI"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Quit"
+msgstr "脟谋x"
+
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid "Graphics memory: %s kB\n"
+msgstr "Ekran kart谋 yadda艧谋: %s KB\n"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to compilation tools"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Yerli 脟ap Edici"
+msgid "Please select data to restore..."
+msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Pipe job into a command"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"Aboot istifad蓹 etm蓹yi ist蓹yirsinizs蓹, bo艧 disk sah蓹si (2048 sektor b蓹sdir.)\n"
+"buraxmay谋 unutmay谋n."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "脟ap Edici avadanl谋臒谋 URI"
+msgid "Standard test page"
+msgstr "Standart"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "脟ap Edici Vericisi"
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create"
+msgstr "Yarat"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "What"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "Paketl蓹ri ist蓹rk蓹n bir x蓹ta oldu:"
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "艦蓹b蓹k蓹 脟ap Edicisi (soket) "
+msgid "Bulgarian (BDS)"
+msgstr "Bulqarca"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Uzaq 莽ap edici vericisi(lpd)"
+msgid "Disable Server"
+msgstr "Databeyz"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
+msgid "Filesystem encryption key"
+msgstr "Fayl sistemi n枚v眉: "
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Uzaq 脟ap Edici"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Yerli 脟ap Edici"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "脟ap Edicini Qur"
+msgid "Save theme"
+msgstr "Sistemi qur"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "脟ap Edici"
+msgid "group"
+msgstr "陌艧 qrupu"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr "Braziliya"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "艦蓹b蓹k蓹ni yenid蓹n ba艧latmaq ist蓹yirsiniz?"
+msgid "Auto Install"
+msgstr "Qurulum"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Uzaq 脟ap Edici"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋 Sehirbaz谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
+msgid "Removable media automounting"
+msgstr "Tax谋l谋b s枚k眉l蓹 bil蓹n avadanl谋qlar谋n avtomatik ba臒lanmas谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
+msgid "Printing"
+msgstr "脟ap Edici"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "Yeni b枚lm蓹 yarat"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "S眉r眉c眉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "unknown"
+msgstr "bilinm蓹y蓹n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "Fdisk istifad蓹 et"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "T茝K茝R陌 OYNADIN!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Yerli 脟ap Edici"
+msgid "Automatic IP"
+msgstr "Avtomatla艧d谋r谋lm谋艧 IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer options"
-msgstr "脟ap edici se莽蓹n蓹kl蓹ri"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer manufacturer, model"
+msgid "Configuration of a remote printer"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "脟ap Edici Ba臒lant谋s谋"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "V蓹kil verici http://... 艧蓹klind蓹 olmal谋d谋r."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
msgstr "脟ap Edicisiz"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"陌st蓹s蓹niz indi %s modulunun parametrl蓹rini g枚st蓹r蓹 bil蓹rsiniz.\n"
+"Parametrl蓹r``ad=qiym蓹t ad2=qiym蓹t2...'' 艧蓹klind蓹 olmal谋d谋r.\n"
+"M蓹s蓹l蓹n ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "陌nternet qur臒ular谋"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "B枚lm蓹 c蓹dv蓹lini qeyd etm蓹d蓹n 莽谋x谋rs谋n谋z?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "脟ap Edicisiz"
+msgid "Installing packages..."
+msgstr "%s paketi qurulur"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normal Mod"
+msgid "Dutch"
+msgstr "Hollandiya dili"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "艦蓹b蓹k蓹ni qur"
+msgid "The following packages need to be installed:\n"
+msgstr "A艧a臒谋dak谋 paketl蓹r qurulacaqd谋r"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr "Anqola"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+msgid "service setting"
+msgstr "avadanl谋q"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "X眉susi"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
+"Fayl ba艧qa bir loopback t蓹r蓹find蓹n istifad蓹d蓹dir, ba艧qa\n"
+"birini se莽in"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"A艧a臒谋da yaz谋莽谋dak谋 n枚vb蓹l蓹r verilmi艧dir.\n"
-"Yenil蓹rini 蓹lav蓹 ed蓹 bil蓹r, v蓹 ya m枚vcud olanlar谋 d蓹yi艧dir蓹 bil蓹rsiniz."
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Latviya"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
+msgid "No known driver"
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
+
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "%s paketi qurulur"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "脟ap Edicini Qur"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Local Area Network..."
+msgstr "Yerli 艦蓹b蓹k蓹ni Qura艧d谋r..."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "脟ap Edicini Qur"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr "Komp眉terinizd蓹 s蓹s sistem谋 ba艧lad谋n"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+msgid "Information"
+msgstr "M蓹'lumat谋 g枚st蓹r"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "脟ap Edici Ba臒lant谋s谋 Se莽in"
+msgid "No network card"
+msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Yerli 脟ap Edici"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "Hans谋 dili ist蓹yirsiniz?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "%s paketi qurulur"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 d眉ym蓹li"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Rezolyusiya: %s\n"
+msgid "Detailed information"
+msgstr "M蓹'lumat谋 g枚st蓹r"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "Bu floppi FAT 艧蓹klind蓹 deyildir"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "艦眉bh蓹ci"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "艦蓹b蓹k蓹 Qur臒ular谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "high"
-msgstr "Y眉ks蓹k"
+msgid "Graphic Card"
+msgstr "Ekran kart谋"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Fat fayl sistemi uclar谋 hesaplan谋r"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr ""
+msgid "Provider dns 1 (optional)"
+msgstr "Dns xidm蓹tcisi 1 (arzuya g枚r蓹)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"陌ndi %s sabit diskinizi b枚lm蓹l蓹ndir蓹 bil蓹rsiniz\n"
+"陌艧inizi bitirdiyinizd蓹 `w' il蓹 qeyd etm蓹yi unutmay谋n"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "艦蓹b蓹k蓹ni qur"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "艦蓹b蓹k蓹 Qur臒ular谋"
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Close"
+msgstr "Qapat"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmay谋b"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Ba臒lant谋n谋z ba艧lad谋l谋r..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "T蓹qvim"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "陌nternet qur臒ular谋"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
+"Uzaqdak谋 bir lpd 莽ap edici n枚vb蓹sini istifad蓹 etm蓹k 眉莽眉n, \n"
+"莽ap edicinin ba臒l谋 oldu臒u 莽ap edici vericisinin ad谋n谋 v蓹 n枚vb蓹 \n"
+"ad谋n谋n谋 verm蓹lisiniz."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "脟ap Edicisiz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Iceland"
+msgstr "陌slandiya"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "脟ap edici ad谋 t蓹kc蓹 h蓹rf, r蓹q蓹m v蓹 alt x蓹tt daxil ed蓹 bil蓹r"
+msgid "stopped"
+msgstr "dayand谋r谋l谋b"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "A臒ac谋 A莽"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+msgid "Expert Mode"
+msgstr "Usta Modu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "脟ap edici se莽蓹n蓹kl蓹ri"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS Verici"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> ir蓹li/geri | <Bo艧luq> i艧ar蓹tl蓹 | <F12> sonrak谋 ekran"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "脟ap edici se莽蓹n蓹kl蓹ri"
+msgid "Zimbabwe"
+msgstr "Zimbabve"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
+msgid "Please enter the host name or IP."
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
+msgid "When"
+msgstr "脟蓹rx"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "陌kinci DNS Vericisi (arzuya g枚r蓹)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finlandiya"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "R蓹ng d蓹rinliyi: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Bu paketi sistemd蓹n 莽谋xarda bilm蓹zsiniz. Yenil蓹nm蓹lidir"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "Disketd蓹n geri 莽a臒谋r"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
+msgid "Slovenia"
+msgstr "Sloveniya"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
msgstr ""
+"Bir istifad蓹莽i girin\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "脟ap Edici Ba臒lant谋s谋"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Buradak谋 bir birind蓹n f蓹rqli se莽蓹n蓹kl蓹r蓹 yenil蓹rini 蓹lav蓹 ed蓹 bil蓹r,\n"
+"ya da m枚vcud olanlar谋 d蓹yi艧dir蓹 bil蓹rsiniz."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"at 蓹mri, zamanlanan 蓹mrl蓹ri i艧l蓹m蓹l蓹ri laz谋m g蓹l蓹n vaxtda i艧l蓹dir.\n"
+"Sistem y眉k眉 laz谋mi q蓹d蓹r al莽aq oldu臒unda y谋臒ma 蓹mrl蓹ri i艧l蓹dilir."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"S谋naq s蓹hif蓹si 莽ap edici vasit蓹sin蓹 g枚nd蓹rildi.\n"
-"脟ap edicinin i艧l蓹m蓹si 眉莽眉n bir az vaxt ke莽蓹r.\n"
-"D眉z m眉 i艧l蓹yir?"
+msgid "Installing SANE packages..."
+msgstr "%s paketi qurulur"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "a莽谋l谋艧 disketi yarad谋lmas谋"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
msgstr ""
-"S谋naq s蓹hif蓹si 莽ap edici vasit蓹sin蓹 g枚nd蓹rildi.\n"
-"脟ap edicinin i艧l蓹m蓹si 眉莽眉n bir az vaxt ke莽蓹r.\n"
-"脟ap v蓹ziyy蓹ti:\n"
-"%s\n"
-"\n"
-"D眉z m眉 i艧l蓹yir?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
+msgid "Change type"
+msgstr "B枚lm蓹 n枚v眉n眉 D蓹yi艧dir"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO Qurulumu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Standart"
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"T蓹brikl蓹r, qurulu艧 bitdi.\n"
+"Cdrom v蓹 disketi 莽谋xartd谋qtan sonra Enter'蓹 basaraq komp眉terinizi \n"
+"yenid蓹n ba艧lad谋n. Linuks Mandrake'nin bu burax谋l谋艧谋ndak谋 yamaqlar haqq谋nda \n"
+"m蓹'lumat almaq 眉莽眉n http://www.mandrakelinux.com 眉nvan谋ndan Errata'ya "
+"bax谋n.\n"
+"Sisteminizin qur臒ular谋 haqq谋nda daha geni艧 bilgiyi Linuks Mandrake \n"
+"陌stifad蓹莽i Kitabc谋臒谋nda tapa bil蓹rsiniz."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Print"
-msgstr "脟ap Edici"
+msgid "paranoid"
+msgstr "艦眉bh蓹ci"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "B蓹li, h蓹r iki s谋naq s蓹hif蓹sini d蓹 莽ap et"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Qap谋lar谋 s谋na"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Rezolyusiya"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "脟ap edicini s谋namaq ist蓹yirsiniz?"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Bir SMB 莽ap edicid蓹n yekun almaq 眉莽眉n, SMB komp眉ter ad谋, 莽ap edici "
+"vericisinin\n"
+"IP 眉nvan谋, 莽ap edicinin payla艧d谋rma ad谋, i艧l蓹m蓹 grupu, istifad蓹莽i ad谋 v蓹 \n"
+"parol verilm蓹lidir."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Option %s out of range!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "reconfigure"
+msgstr "yenid蓹n qura艧d谋r"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Sizin kart谋n谋z谋n XFree %s il蓹 3D d蓹st蓹yi ola bil蓹r.\n"
+"D陌QQ茝T! BU SINAQ M茝RH茝L茝SIND茝DIR V茝 KOMP脺TER陌N陌Z DONDURA BIL茝R."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "脟ap Edici Ba臒lant谋s谋"
+msgid "Xinetd Service"
+msgstr "脟ap Edici Vericisi"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10681,554 +10359,566 @@ msgstr ""
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "陌nternet qur臒ular谋"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"aboot qurulumunda xata, \n"
+"ilk disk b枚lm蓹sini yox ets蓹 bel蓹 yen蓹 d蓹 qurulmas谋n谋 ist蓹yirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "陌nternet qur臒ular谋"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "N枚vb蓹ni sil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "N蓹 c眉r bir 莽ap ediciniz var?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Xahi艧 edirik a艧a臒谋dak谋lar谋 doldurun ya da se莽in"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "脟ap Edici Ba臒lant谋s谋"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "A莽谋l谋艧 Protokolu"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Uzaq 脟ap Edici"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-diskl蓹ri %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Do臒rudur?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "The package %s is needed. Install it?"
msgstr ""
+"Bu paket yenil蓹nm蓹lidir\n"
+"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Uzaq 脟ap Edici"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "A莽谋l谋艧da"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Location"
-msgstr "Yeri"
+msgid "Bus identification"
+msgstr "Tan谋tma"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Description"
-msgstr "陌zah"
+msgid "Please make a backup of your data first"
+msgstr "茝vv蓹lc蓹 datan谋z谋n yed蓹yini al谋n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer"
-msgstr "脟ap edici ad谋"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Yeri"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
+"Sizin bird蓹n 莽ox diskiniz var, linux qurmaq 眉莽眉n hans谋n谋 istifad蓹 "
+"ed蓹c蓹ksiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Eritrea"
+msgstr "Eritre"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Uzaq 脟ap Edici"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
+msgid "Morocco"
+msgstr "M蓹rake艧"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "%s paketi qurulur"
+msgid "Which printer model do you have?"
+msgstr "N蓹 c眉r bir 莽ap ediciniz var?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "%s paketi qurulur"
+msgid "Add a new printer"
+msgstr "脟ap Edicisiz"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "%s paketi qurulur"
+msgid "<-- Delete"
+msgstr "Sil"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+msgid "Nepal"
+msgstr "Nepal"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A command line must be entered!"
+msgid "chunk size"
+msgstr "par莽a b枚y眉kl眉y眉"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "commands before booting, or 'c' for a command-line."
msgstr ""
+"acilisdan evvel emrleri duzeltm蓹k ucun 'e', emr setiri ucun ise 'c' basin"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Sah蓹(domain) ad谋"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "Problems installing package %s"
+msgstr "%s paketi qurulurk蓹n x蓹ta oldu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Pipe into command"
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "%s tap谋ld谋"
+msgid "Reload partition table"
+msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "A valid URI must be entered!"
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
+"B蓹li, bu istifad蓹莽i 眉莽眉n avtomatik giri艧 ist蓹yir蓹m (istifad蓹莽i, masa 眉st眉)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Device URI"
-msgstr "脟ap Edici avadanl谋臒谋 URI"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port"
-msgstr "Qap谋"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "脟ap Edici Ev sahibi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The port number should be an integer!"
-msgstr "Qap谋 n枚mr蓹si r蓹q蓹ml蓹 yaz谋lmal谋d谋r"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "脟ap Edici Ev sahibi"
+msgid "Boot"
+msgstr "K枚k"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Soket 莽ap edicid蓹n yekun almaq 眉莽眉n, 莽ap edicinin ev sahibi ad谋n谋 ve "
-"m眉mk眉ns蓹, qap谋s谋n谋n n枚mr蓹sini verm蓹lisiniz."
+msgid "Tuner type:"
+msgstr "B枚lm蓹 n枚v眉n眉 D蓹yi艧dir"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Soket 脟ap Edici Qur臒ular谋"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "\"Menu\" key"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Ba臒lant谋n谋z ba艧lad谋l谋r..."
+msgid "Security Administrator:"
+msgstr "Uzaq 脟ap Edici (lpd) Se莽蓹n蓹kl蓹ri"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+msgid "Please enter your login"
+msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
+"He莽 陌nternet ba臒lant谋n谋z yoxdur.\n"
+"茝vv蓹lc蓹 onlar谋 'Qura艧d谋r'a basaraq qurun"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "脟ap Edici N枚vb蓹 Ad谋"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer Server"
-msgstr "脟ap Edici Vericisi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "Fonts copy"
msgstr ""
-"NetWare 莽ap edicid蓹n yekun almaq 眉莽眉n, NetWare vericisinin ad谋 v蓹 莽ap "
-"edici \n"
-"n枚vb蓹si ad谋 il蓹 istifad蓹莽i ad谋 va parolu verilm蓹lidir."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare 脟ap Edici Qur臒ular谋"
+msgid "Automated"
+msgstr "Avtomatla艧d谋r谋lm谋艧"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "Paket se莽kil蓹rini saxla"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Loopback fayl谋 艧蓹kill蓹ndirilir: %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "陌艧 qrupu"
+msgid "use pptp"
+msgstr "pptpe istifad蓹 et"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Payla艧d谋rma ad谋"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "A莽谋l谋艧da avtomatik olaraq ba艧layacaq xidm蓹tl蓹ri se莽in"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB verici IP"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "SMB verici ad谋"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "艦蓹b蓹k蓹ni qur"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Paketleri almaq 眉莽眉n bir 蓹ks 眉nvan谋 se莽in"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Bir SMB 莽ap edicid蓹n yekun almaq 眉莽眉n, SMB komp眉ter ad谋, 莽ap edici "
-"vericisinin\n"
-"IP 眉nvan谋, 莽ap edicinin payla艧d谋rma ad谋, i艧l蓹m蓹 grupu, istifad蓹莽i ad谋 v蓹 \n"
-"parol verilm蓹lidir."
+"FAT t蓹dqiqat莽谋m谋z sizin b枚l眉ml蓹ri i艧l蓹d蓹 bilmir,\n"
+"bu x蓹ta oldu: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) 脟ap Edici Se莽蓹n蓹kl蓹ri"
+msgid "Which sector do you want to move it to?"
+msgstr "Hans谋 sektora da艧谋maq ist蓹yirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
+msgid "Do you want to click on this button?"
+msgstr "aboot istifad蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Uzaqdak谋 ev sahibi ad谋"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Uzaqdak谋 ev sahibi ad谋"
+msgid "Bahamas"
+msgstr "Bahama"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Uzaq 脟ap Edici"
+msgid "Manual configuration"
+msgstr "Qura艧d谋rma"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Uzaqdak谋 ev sahibi ad谋"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr "axtar"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Uzaqdak谋 bir lpd 莽ap edici n枚vb蓹sini istifad蓹 etm蓹k 眉莽眉n, \n"
-"莽ap edicinin ba臒l谋 oldu臒u 莽ap edici vericisinin ad谋n谋 v蓹 n枚vb蓹 \n"
-"ad谋n谋n谋 verm蓹lisiniz."
+"Bu paket /etc/sysconfig/keyboard'dak谋 se莽ili klaviatura d眉z眉l眉艧眉n眉 y眉kl蓹r.\n"
+"Hans谋 klaviatura d眉z眉l眉艧眉 istifad蓹 edil蓹c蓹yi kbdconfig il蓹 se莽ilir.\n"
+"Bu, mandrake qurulan bir 莽ox komp眉terd蓹 f蓹al burax谋lmal谋d谋r."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq 脟ap Edici (lpd) Se莽蓹n蓹kl蓹ri"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Qura艧d谋rma"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "脟ap Edici avadanl谋臒谋 URI"
+msgid "Xpmac (installation display driver)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Syslog, bir 莽ox vasit蓹nin ismar谋clar谋n谋 m眉xt蓹lif sistem qeydl蓹rind蓹\n"
+"tutmalar谋na imkan ver蓹r. Syslog'un h蓹r zaman i艧l蓹m蓹si\n"
+"yax艧谋 fikirdir."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
+msgid "Unknown/Others"
+msgstr "脺mumi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Se莽蓹n蓹kl蓹r"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "A艧a臒谋dak谋 paketl蓹r sistemd蓹n silin蓹c蓹kl蓹r"
+msgid "Auto-detected"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Komp眉ter谋n谋zi 陌nternet ba臒lant谋s谋n谋 b枚l眉艧d眉rm蓹k 眉莽眉n qura艧d谋r谋rs谋n谋z.\n"
+"Bu se莽蓹n蓹kl蓹 yerli 艧蓹b蓹k蓹nizd蓹ki ba艧qa komp眉terl蓹r sizin 陌nternet "
+"ba臒lant谋n谋zdan faydalana bil蓹c蓹kl蓹r.\n"
+"\n"
+"X蓹b蓹darl谋q: Yerli 艦蓹b蓹k蓹 (LAN) qurmaq 眉莽眉n uy臒un 艦蓹b蓹k蓹 Adapterin蓹 "
+"ehtiyac谋n谋z var."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -11238,944 +10928,877 @@ msgid ""
"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "R蓹dd Et"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
+"HardDrake texniki t蓹'minat s谋na臒谋 aparar v蓹 onlar谋 bir 枚n qura艧d谋rmadan "
+"ke莽ir蓹r."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Yerli 脟ap Edici"
+msgid "Remote Printers"
+msgstr "Uzaq 脟ap Edici"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Yerli 脟ap Edici"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "%s fayl谋 yarad谋l谋r v蓹 艧蓹kill蓹ndirilir"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "脟ap Edici avadanl谋臒谋 URI"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Yerli 脟ap Edici"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "茝lav蓹 etm蓹k 眉莽眉n m枚vcud bir LVM se莽in"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "脟ap Edicisiz"
+msgid "xfs restart"
+msgstr "m蓹hdudla艧d谋r"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "脟ap Edici Ev sahibi"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "uy臒un b枚lm蓹 tap谋lmad谋"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "艦蓹b蓹k蓹 脟ap Edicisi (soket) "
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tap谋ld谋"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "Sah蓹(domain) ad谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "%s qap谋s谋nda tap谋ld谋"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "%s Sistemin蓹 Xo艧g蓹lmi艧siniz"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Uzaq 脟ap Edici"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "%s s眉r眉c眉s眉n蓹 bo艧 bir disket yerl蓹艧dirin"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "脟ap Edici"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"B蓹zi hallarda, %s s眉r眉c眉 d眉zg眉n i艧l蓹m蓹si 眉莽眉n 蓹lav蓹 m蓹'lumat ist蓹y蓹 bil蓹r.\n"
+"S眉r眉c眉ler 眉莽眉n 蓹lav蓹 bir x眉susiyy蓹t g枚st蓹rm蓹k mi ist蓹y蓹rsiniz, yoxsa\n"
+"s眉r眉c眉l蓹rin laz谋mi m蓹'lumatlar 眉莽眉n avadal谋臒谋 tan谋mas谋n谋 m谋 ist蓹y蓹rsiniz? \n"
+"B蓹'z蓹n tan谋mlama komp眉terinizi dondura bil蓹r amma dondu臒u 眉莽眉n\n"
+"komp眉teriniz蓹 he莽 bir 艧ey olmaz."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"陌nternet Ba臒lant谋s谋 B枚l眉艧d眉rm蓹 vasit蓹sin蓹 Xo艧 G蓹ldiniz!\n"
+"\n"
+"%s\n"
+"\n"
+"Qura艧d谋rma sehirbaz谋n谋 a莽maq 眉莽眉n Qura艧d谋ra t谋qlay谋n."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "脟ap Edicini Qur"
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Yerli 脟ap Edici"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
+msgid "Belize"
+msgstr "Beliz"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Ba臒lant谋n谋z谋 a莽谋l谋艧da ba艧latmaq ist蓹yirsiniz?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "脟ap edicini s谋namaq ist蓹yirsiniz?"
+#: ../../any.pm:1
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr "脟蓹kird蓹k A莽谋l谋艧谋 Vaxt Dolmas谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Sizin kart谋n谋z谋n 3D s眉r'蓹tl蓹ndirm蓹 d蓹st蓹yi ola bil蓹r, amma sadec蓹 olaraq "
+"XFree %s\n"
+"il蓹 d眉zg眉n i艧l蓹y蓹r.\n"
+"Sizin kart谋n谋za XFree %s t蓹r蓹find蓹n d蓹st蓹k verilir ve bu 2D 眉莽眉n daha yax艧谋 "
+"bir fikir olar."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX b枚lm蓹 sehirbaz谋 bu yolu tapd谋:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "Macarca"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"陌nternet xidm蓹t vericinizi se莽in.\n"
+"Siyah谋da deyils蓹 Siyah谋da deyil'i se莽in."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+msgid "LDAP Server"
+msgstr "Verici"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"PCMCIA d蓹st蓹yi, laptoplarda eternet v蓹 modem kimi avadanl谋qlar谋n "
+"d蓹st蓹kl蓹nm蓹sin蓹 imkan ver蓹r.\n"
+"Qurulmad谋臒谋 vaxtda a莽谋l谋艧da i艧l蓹m蓹z, i艧l蓹m蓹sin蓹 ehtiyac olmayan\n"
+"komp眉terl蓹rd蓹 qurulu olmas谋 problem yaratmaz."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "脟ap Edicisiz"
+msgid "Choose your country"
+msgstr "Klaviaturan谋z谋 se莽in"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "脟ap Edicisiz"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+msgid "Standalone Tools"
+msgstr "Konsol Vasit蓹l蓹ri"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "m蓹hdudla艧d谋r"
+msgid "Where"
+msgstr "脟蓹rx"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "but not matching"
+msgstr "amma ox艧am谋r"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Do臒rudur?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "脟ap Edici Ev sahibi"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA kartlar qurulur..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu 蓹ksikdir"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "N枚vb蓹ni sil"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s tap谋ld谋"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Kristmas Adas谋"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "A莽谋l谋艧 y眉kl蓹yicisi qurulumu iflas etdi. X蓹ta:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "b枚lm蓹 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "艦眉bh蓹ci"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "NIS istifad蓹 et"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Yerli 脟ap Edici"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "N枚vb蓹ni sil"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "B眉t眉n diski sil"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (茝sas)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "艦蓹b蓹k蓹ni qur"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Qurtard谋"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "CUPS verici IP"
+msgid "Turks and Caicos Islands"
+msgstr "T眉rk v蓹 Kaykos Adalar谋"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Uzaq 脟ap Edici"
+msgid "permissions"
+msgstr "b枚lm蓹 %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Qura艧d谋rma"
+#, c-format
+msgid "<- Previous"
+msgstr "<- 茝vv蓹lki"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "脟ap Edici"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "陌nternet ba臒lant谋s谋 b枚l眉艧d眉r眉lm蓹si qura艧d谋r谋lmas谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Otaq v蓹 grup s谋ralamas谋 aras谋nda g蓹z"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "脰rt眉kl蓹r"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Se莽蓹n蓹kl蓹r: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"A莽谋l谋艧 陌dar蓹莽isi olaraq haz谋rda %s i艧l蓹dirsiniz.\n"
+"Qura艧d谋rma sehirbaz谋n谋 ba艧latmaq 眉莽眉n t谋qlay谋n."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "陌nternet qur臒ular谋"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "M眉q蓹dd蓹s Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"Uzaq CUPS vericil蓹ri 眉莽眉n he莽 bir qura艧d谋rma臒a l眉z眉m yoxdur\n"
-"Buradak谋 h蓹r 莽ap edici avtomatik tap谋lacaqd谋r.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni se莽in."
+"B蓹'zi b枚lm蓹l蓹r bitdi.\n"
+"\n"
+"H蓹qiq蓹t蓹n d蓹 莽谋xmaq ist蓹yirsiniz?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "脟ap ediciniz n蓹 艧蓹kild蓹 ba臒l谋d谋r?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "脟ap Edici Ba臒lant谋s谋 Se莽in"
+msgid "Polish (qwertz layout)"
+msgstr "Polyakca (QWERTZ s谋ras谋)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinam"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the user umask."
msgstr ""
+"%s emeliyyat sistemi secki proqramina xos g蓹lmissiniz!\n"
+"\n"
+"I莽lerinden birini acmaq ucun adini yazin ve <ENTER>\n"
+"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
+"\n"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portuqalca"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Loopback fayl ad谋: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP 眉nvan谋 1.2.3.4 艧蓹klind蓹 olmal谋d谋r"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "serial"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Bu qovluq k枚k fayl sistemi i莽蓹risind蓹 olmal谋d谋r"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Sistem y眉kl蓹yicini qur"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Ekran kart谋n谋z谋n yadda艧 b枚y眉kl眉y眉n眉 se莽in"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM ad谋?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "%s %s ara 眉z眉 tap谋ld谋"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Qurulum"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "脟ap Edicisiz"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kart IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "A莽谋l谋艧 disketi yaratmaq 眉莽眉n istifad蓹 edil蓹c蓹k disket s眉r眉c眉y眉 se莽in"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "M蓹tn menyulu LILO"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Qurtard谋"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "茝ks 眉nvan谋na ba臒lant谋 qurulur"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litvaniya dili AZERTY (k枚hn蓹)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilya dili (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO Qurulumu"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "M眉q蓹dd蓹s Vinsent v蓹 Qrenadin"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fayl/_A莽"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Firmware Gecikm蓹sini A莽"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Hungary"
+msgstr "Macar谋stan"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Qap谋lar谋 s谋na"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Qura艧d谋rma"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "New Zealand"
+msgstr "Yeni Zellandiya"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Holland Antill蓹ri"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "脟ap Edicisiz"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "He莽 bir ISDN PCI kart tap谋lma谋. Sonrak谋 ekrandak谋lardan se莽in."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "GB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Xahi艧 edirik bir istifad蓹莽i ad谋 al谋n"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "CDd蓹n A莽谋l谋艧谋 F蓹alla艧d谋r谋m?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Normal modem t蓹sbiti"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -12183,740 +11806,541 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "X verici 眉莽眉n se莽蓹n蓹kl蓹ri g枚st蓹rin"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sini se莽in"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Qurulumu bitirm蓹k 眉莽眉n laz谋mi sah蓹 yoxdur, xahi艧 edirik 蓹lav蓹 edin"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Se莽蓹n蓹kl蓹r"
+msgid "%s on %s"
+msgstr "Qap谋"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
-"Biz d枚rd眉nc眉 s蓹viyy蓹 haqlar谋n谋 verdik v蓹 sistem xarici ba臒lant谋lara qar艧谋 "
-"tamamil蓹 qapal谋d谋r.\n"
-"T蓹hl眉k蓹sizlik s蓹viyy蓹si indi 蓹n 眉std蓹dir."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Bu t蓹hl眉k蓹sizlik s蓹viyy蓹siyl蓹 sistemin bir verici olaraq istifad蓹si "
-"m眉mk眉nd眉r. \n"
-"T蓹hl眉k蓹sizlik, bird蓹n 莽ox al谋c谋n谋n ba臒lanmas谋na icaz蓹 ver蓹c蓹k 艧蓹kild蓹 "
-"art谋r谋lm谋艧d谋r. "
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Sisteminiz hans谋 m蓹qs蓹dl蓹 istifad蓹 edil蓹c蓹k?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "Guinea"
+msgstr "Qvineya"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"陌nternet蓹 ba臒l谋 bir komp眉ter 眉莽眉n standart v蓹 t枚vsiy蓹 edil蓹n bir "
-"t蓹hl眉k蓹sizlik s蓹viyy蓹sidir."
+msgid "The system is now connected to the Internet."
+msgstr "陌nternet蓹 art谋q ba臒l谋s谋n谋z"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Cinubi Georgiya v蓹 C蓹nubi Sandvi莽 Adas谋"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"Parollar f蓹alla艧d谋r谋ld谋, yen蓹 d蓹 bir 艧蓹b蓹k蓹 眉st眉nd蓹 istifad蓹 edilm蓹m蓹si "
-"t枚vsiy蓹 edilir."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu s蓹viyy蓹 RAID'i diqq蓹tli istifad蓹nizi t枚vsiy蓹 edirik. Sisteminiz daha "
-"asand\n"
-"i艧l蓹dil蓹c蓹k, ancaq x蓹talara qar艧谋 da h蓹ssaiyy蓹ti d蓹 artacaqd谋r. 陌nternet蓹 \n"
-"ba臒l谋 is蓹niz bunu t枚vsiy蓹 etmirik. Parol il蓹 girilir."
+msgid "Mozambique"
+msgstr "Mozambiq"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "艦眉bh蓹ci"
+msgid "Icon"
+msgstr "Timsal"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "Y眉ks蓹k"
+msgid "Please choose what you want to backup"
+msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "Y眉ks蓹k"
+msgid "256 colors (8 bits)"
+msgstr "256 r蓹ng (8 bits)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Z蓹if"
+msgid "Read-write"
+msgstr "Oxu-yaz"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakerl蓹r蓹 xo艧g蓹lmi艧siniz"
+msgid "Size: %s\n"
+msgstr "B枚y眉kl眉k: %s\n"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(蓹) t蓹krar girin v蓹 d蓹yi艧iklikl蓹ri f蓹alla艧d谋r谋n"
+msgid "Hostname: "
+msgstr "Ev sahibi ad谋:"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "L眉tfen 莽谋x谋n v蓹 Ctrl-Alt-BackSpace d眉ym蓹l蓹rin蓹 bas谋n"
+msgid "Chunk size %s\n"
+msgstr "Par莽a b枚y眉kl眉y眉 %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Disket s眉r眉c眉 yoxdur"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
+msgid "Error!"
+msgstr "X蓹ta"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Write Config"
-msgstr "yenid蓹n qura艧d谋r"
+msgid "cable connection detected"
+msgstr "Kabel ba臒lant谋s谋"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dynamic IP Address Pool:"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "/_Report Bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "B枚y眉kl眉y眉n眉 D蓹yi艧dir"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Dominica"
+msgstr "Dominik"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Verici"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Sah蓹(domain) ad谋"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Rezolyusiya: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "matching"
+msgstr "ox艧ay谋r"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Routers:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmask"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Xahi艧 edirik do臒ru qap谋n谋 se莽in. M蓹s蓹l蓹n, MS Windowsdak谋 COM1'in qar艧谋l谋臒谋\n"
+"Linuksda ttyS0'd谋r."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "A艧a臒谋dak谋 paketl蓹r sistemd蓹n silin蓹c蓹kl蓹r"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "陌nternet蓹 ba臒lan"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Qura艧d谋r谋l谋r..."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use existing partitions"
+msgstr "Var olan b枚lm蓹l蓹ri i艧l蓹dimmi"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP Al谋c谋s谋"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Frans谋zca (Kanada/Quebec)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP Al谋c谋s谋"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Si莽an avadanl谋臒谋: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Add Client -->"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP Al谋c谋s谋"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP Al谋c谋s谋"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "type: %s"
-msgstr "N枚v: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid "We are now going to configure the %s connection."
msgstr ""
+"\n"
+"Ba臒lant谋n谋z谋 k蓹s蓹 bil蓹rsiniz. Ya da ba臒lant谋n谋 yenid蓹n d蓹 qura艧d谋ra "
+"bil蓹rsiniz."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
+msgid "MandrakeExpert Corporate"
+msgstr "Usta"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Fayl se莽"
+msgid "Write protection"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Sil"
+msgid "You've not selected any font"
+msgstr "N枚vb蓹ni sil"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "Language"
+msgstr "陌艧l蓹tdiyiniz dili se莽in"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer model selection"
+msgstr "脟ap Edici Ba臒lant谋s谋"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build All Kernels -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"%s b枚lm蓹sinin n枚v眉n眉 d蓹yi艧dirdikd蓹n sonra, bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar "
+"silin蓹c蓹kdir"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Ba臒l谋 deyil"
+msgid "%d seconds"
+msgstr "%d saniy蓹 sonra 莽谋x谋lacaq"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "%s s眉r眉c眉s眉n蓹 bo艧 bir disket yerl蓹艧dirin"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Boot ISO"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Boot Floppy"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Haz谋rk谋 disk b枚lm蓹l蓹ndirm蓹si"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
+"The following printers\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP Al谋c谋s谋"
+msgid "type: %s"
+msgstr "N枚v: "
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovakca (QWERTY)"
+
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
+msgid "No Sound Card detected!"
+msgstr "Ba臒l谋 deyil"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Mouse Port"
+msgstr "Si莽an Qap谋s谋"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Verici"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Start Server"
+msgid "Ftp Server"
msgstr "NIS Verici"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Databeyz"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Databeyz"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "陌nternet qur臒ular谋"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Loopback fayl谋 艧蓹kill蓹ndirilir: %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "陌stifad蓹莽i 蓹lav蓹 et"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "T蓹brikl蓹r!"
-
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Si莽an谋n谋z谋n ba臒l谋 oldu臒u serial Qap谋y谋 se莽in."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "Uganda"
+msgstr "Uqanda"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "T蓹krarla"
-
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonras谋 qur臒ular"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "X蓹ta"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
+msgid "Comoros"
+msgstr "Komor"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
"\n"
"\n"
+"Press OK to continue."
msgstr ""
+"\n"
+"Ba臒lant谋n谋z谋 k蓹s蓹 bil蓹rsiniz. Ya da ba臒lant谋n谋 yenid蓹n d蓹 qura艧d谋ra "
+"bil蓹rsiniz."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot modu"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "S谋ravi 3 D眉ym蓹li Si莽an"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Payla艧d谋rma ad谋"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12928,4596 +12352,5209 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
+msgid "KB"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "Fayldan geri 莽a臒谋r"
+msgid "Network & Internet"
+msgstr "艦蓹b蓹k蓹 ara 眉z眉"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Fayl sistemi qur臒ular谋"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litvanya dili \"Fonetik\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+msgid "Sharing of local scanners"
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "Xidm蓹tl蓹r v蓹 vasit蓹l蓹r"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+msgid "Remote host name missing!"
+msgstr "Uzaqdak谋 ev sahibi ad谋"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Fayla qeyd et"
+msgid "Network"
+msgstr "艦蓹b蓹k蓹 ara 眉z眉"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Z蓹if parol se莽diniz!"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovakca (QWERTZ)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
+msgid "Use daemon"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#, c-format
+msgid "Authentication"
+msgstr "Tan谋tma"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
+msgid "Additional CUPS servers: "
+msgstr "CUPS verici IP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
+msgid "Where do you want to mount %s?"
+msgstr "%s avadanl谋臒谋n谋 haraya ba臒lamaq ist蓹yirsiniz?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "A艧a臒谋dak谋 paketl蓹r qurulacaqd谋r"
+msgid "Restore Via Network"
+msgstr "Fayldan geri 莽a臒谋r"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "茝lc蓹zair"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd b枚y眉kl眉y眉"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Sonrak谋 ->"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- 茝vv蓹lki"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Hal:"
+msgid "Setting Default Printer..."
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Ara 脺z %s (%s modulu i艧l蓹dilir)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Fayldan geri 莽a臒谋r"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Ad: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
+msgid "Generating preview ..."
+msgstr "Avadanl谋qlar tan谋n谋r..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "serial"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "X眉susi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "G眉rc眉 dili (\"Lat谋n\" s谋ras谋)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Fayldan geri 莽a臒谋r"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kenya"
+msgstr "Kenya"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "茝vv蓹lc蓹 ``Ay谋r'-谋 i艧l蓹t"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Ev sahibi ad谋:"
+msgid "Installing mtools packages..."
+msgstr "%s paketi qurulur"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "陌stifad蓹莽i ad谋"
+msgid "You must specify a root partition"
+msgstr "Bir swap sah蓹sin蓹 ehtiyac谋n谋z var"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Parol"
+msgid "first step creation"
+msgstr "a莽谋l谋艧 disketi yarad谋lmas谋"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Ev sahibi ad谋"
+msgid "Select a scanner model"
+msgstr "Ekran kart谋n谋z谋 se莽in"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Fayldan geri 莽a臒谋r"
+msgid "Drakbackup Configuration"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "F蓹rqli qeyd et..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Avtomatik Giri艧"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Disketd蓹n geri 莽a臒谋r"
+msgid "System configuration"
+msgstr "Qura艧d谋rma"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Fayldan geri 莽a臒谋r"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "N枚vb蓹ni sil"
+msgid "Configuring printer ..."
+msgstr "脟ap Edicini Qur"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Fayldan geri 莽a臒谋r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Fayldan geri 莽a臒谋r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Dig蓹r"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "Virgin Adalar谋 (Britaniya)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Disketd蓹n geri 莽a臒谋r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-
-#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Yuxar谋da s眉r眉c眉n眉zd蓹 tap谋lan Linuks b枚lm蓹l蓹ri s谋ralan谋b\n"
+"Sehirbaz谋n t枚vsiy蓹l蓹rin蓹 uyun, onlar 莽ox vaxt i艧蓹 yaray谋r.\n"
+"茝g蓹r bunu ist蓹m蓹s蓹niz en az谋ndan k枚k b枚lm蓹si (\"/\") se莽m蓹lisiniz\n"
+"脟ox ki莽ik b枚lm蓹 se莽m蓹yin. yoxsa 莽ox proqram t蓹'minat谋 y眉kl蓹y蓹 bilm蓹zs蓹niz.\n"
+"茝g蓹r veril蓹rinizi ba艧qa b枚lm蓹d蓹 tutmaq ist蓹yirsinizs蓹, ondabir de \"/home\" "
+"b枚lm蓹si d蓹 yaratmal谋s谋n谋z (bird蓹n 莽ox Linuks\n"
+"b枚lm蓹niz var is蓹).\n"
+"\n"
+"\n"
+"X蓹b蓹riniz olsun, h蓹r b枚lm蓹 a艧a臒谋dak谋 kimi s谋ralan谋b: \"Ad\", \"H蓹cm\".\n"
+"\n"
+"\n"
+"\"Ad\" bel蓹 kodlan谋b: \"s眉r眉c眉 n枚v眉\", \"s眉r眉c眉 m枚mr蓹si\",\n"
+"\"b枚lm蓹 n枚mr蓹si\" (m蓹s蓹l蓹n \"hda1\").\n"
+"\n"
+"\n"
+"\"S眉r眉c眉 n枚v眉\" 蓹g蓹r s眉r眉c眉n眉z IDE s眉r眉c眉d眉rs蓹 \"hd\"dirv蓹 SCSI s眉r眉c眉 is蓹 "
+"\"sd\"dir.\n"
+"\n"
+"\n"
+"\"S眉r眉c眉 n枚mr蓹si\" h蓹mi艧蓹 \"hd\" v蓹 ya \"sd\"d蓹n sonrak谋 r蓹q蓹mdir.IDE "
+"s眉r眉c眉l蓹r 眉莽眉n:\n"
+"\n"
+"*\"a\" y蓹ni \"birinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
+"\n"
+"*\"b\" y蓹ni \"birinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\",\n"
+"\n"
+"*\"c\" y蓹ni \"ikinci IDE idar蓹cisind蓹 ali s眉r眉c眉\",\n"
+"\n"
+"*\"d\" y蓹ni \"ikinci IDE idar蓹cisind蓹 k枚l蓹 s眉r眉c眉\".\n"
+"\n"
+"\n"
+"SCSI s眉r眉c眉l蓹rind蓹 \"a\" n谋n m蓹nas谋 \"birinci s眉r眉c眉\",\n"
+"\"b\"nin m蓹nas谋 \"ikinci s眉r眉c眉\"d眉r vs..."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
+msgid "Remove"
+msgstr "Uzaq 脟ap Edici"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "utopia 25"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "Yes"
+msgstr "B蓹li"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "Cote d'Ivoire"
+msgstr "Kot Divuar"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Hans谋 protokolu istifad蓹 etm蓹k ist蓹yirsiniz?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
+msgid "Restore Progress"
+msgstr "Fayldan geri 莽a臒谋r"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "Estonia"
+msgstr "Estoniya"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"B枚lm蓹 c蓹dv蓹linizd蓹 bir bo艧luq var, amma o da i艧l蓹dil蓹 bilm蓹z.\n"
+"Bu bo艧lu臒u, birinci b枚lm蓹nizi en yax谋n谋ndak谋 geni艧l蓹dilmi艧 b枚lm蓹y蓹 "
+"da艧谋yaraq\n"
+"m蓹s蓹l蓹ni h蓹ll ed蓹 bil蓹rsiniz."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "L蓹臒v et"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Add"
+msgstr "茝lav蓹 et"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉rm蓹 Qura艧d谋rmas谋 apar谋lmay谋b."
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "%s fayl谋 oxunurkan x蓹ta oldu"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Klaviatura"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the connection you want to configure"
+msgstr "陌stifad蓹 ed蓹c蓹yiniz vasit蓹ni se莽in"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Tape \n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "%s 艧蓹b蓹k蓹 avadanl谋臒谋 qurulur"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "F蓹al"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "陌nternet蓹 ba臒lanmaq 眉莽眉n 艧蓹b蓹k蓹 adapteri se莽in."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "G眉nc蓹ll蓹n蓹c蓹k paketlar tap谋l谋r"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Ba臒lama n枚qt蓹si: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "With X"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "脟oxlu Ba艧l谋q qura艧d谋r谋lmas谋"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Se莽蓹n蓹kl蓹r"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "No browser available! Please install one"
+msgstr "Qurulumdan sonra istifad蓹 ed蓹 bil蓹c蓹yiniz ba艧qa dill蓹r se莽蓹 bil蓹rsiniz"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Save via %s on host: %s\n"
+"%s"
msgstr ""
+"M枚vcud qur臒ular谋 saxlay谋m?\n"
+"Hal-haz谋rk谋 qur臒ular:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "32MB d蓹n ki莽ik disk b枚lm蓹l蓹rind蓹 ReiserFS istifad蓹 etm蓹lisiniz"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"rwho protokolu, uzaq istifad蓹莽il蓹rin, rwho vasit蓹si i艧l蓹d蓹n bir komp眉terd蓹\n"
+"olan b眉t眉n istifad蓹莽il蓹ri g枚rm蓹l蓹rina imkan ver蓹r."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "Sah蓹(domain) ad谋"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Si莽an avadanl谋臒谋: %s\n"
+msgid "Sharing of local printers"
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Yerli 脟ap Edici"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "Bo艧"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "%s avadanl谋臒谋n谋 haraya ba臒lamaq ist蓹yirsiniz?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Ara 眉z %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 d眉ym蓹"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Select user manually"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Fayl sistemi qur臒ular谋"
+msgid "Korea"
+msgstr "Daha 脟ox"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+msgid "Your choice? (default `%s'%s) "
+msgstr "Se莽kiniz? (蓹sas %s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "脟ap Edicisiz"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Geri al"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Interface %s"
+msgstr "Ara 眉z %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Si莽an qur臒ular谋"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Ba臒lama n枚qt蓹l蓹rini se莽in"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "Oldu"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "More Options"
-msgstr "Modul se莽蓹n蓹kl蓹ri:"
+msgid "Yugoslavian (latin)"
+msgstr "Yugoslavca (lat谋n/kiril)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Qurulur"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "When"
-msgstr "脟蓹rx"
+msgid "Is this an install or an upgrade?"
+msgstr "Bu bir qurulum mu, yoxsa g眉nc蓹ll蓹m蓹midir?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "脟蓹rx"
+msgid "ISDN card"
+msgstr "Daxili ISDN kart"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "What"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"T蓹brik edirik, internet v蓹 艧蓹b蓹k蓹 qura艧d谋r谋lmas谋 qurtard谋.\n"
+"\n"
+"Qur臒ular indi sisteminiz蓹 蓹lav蓹 edil蓹c蓹k.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
+msgid "Printer on remote CUPS server"
+msgstr "Uzaq CUPS vericisi"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "陌stifad蓹莽i ad谋"
+msgid "delete"
+msgstr "Sil"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Ev sahibi ad谋"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Si莽an谋n谋z谋n ba臒l谋 oldu臒u serial Qap谋y谋 se莽in."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Poor"
+msgstr "Z蓹if"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr "Qrenada"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "E'tibars谋z"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektor"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Xeyr"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Fayl se莽"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guadeloupe"
+msgstr "Quadelup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Konsolda BackSpace'in Silm蓹 funksyas谋n谋 g枚rm蓹yini ist蓹yirmisiniz?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "艦aquli yenil蓹m蓹 s眉r'蓹ti"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid " Erase Now "
-msgstr ""
+msgid "Entering step `%s'\n"
+msgstr "Ba艧lan臒谋c add谋m谋 `%s'\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+msgid "Removing %s ..."
+msgstr "Rezolyusiya: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No printer"
+msgstr "脟ap Edicisiz"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Klaviatura qurulu艧unu se莽iniz."
+msgid "alert configuration"
+msgstr "Qura艧d谋rma"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "NetWare Printer Options"
+msgstr "NetWare 脟ap Edici Qur臒ular谋"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "General"
+msgstr "脺mumi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Need hostname, username and password!"
+msgid "Add a user"
+msgstr "陌stifad蓹莽i 蓹lav蓹 et"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋 (%d adapter)"
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Parolsuz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filippin"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Oldu"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "脟ap Edici N枚vb蓹 Ad谋"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "aboot istifad蓹 etm蓹k ist蓹yirsiniz?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusca"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
+msgid "Move files to the new partition"
+msgstr "Yeni b枚lm蓹l蓹r 眉莽眉n bo艧 sah蓹 yoxdur"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "B枚lm蓹 c蓹dv蓹lini qurtar"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "Pitcairn"
+msgstr "Pitkairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "陌艧 qrupu"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "陌stifad蓹莽i ad谋"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "Qrafiki menyulu LILO"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "\"Windows\"u sil"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "T蓹xmini olaraq hesaplan谋r"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Bu paketi sistemd蓹n 莽谋xarda bilm蓹zs谋n谋z. Art谋q qurulmu艧dur."
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "N枚vb蓹ni sil"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Yen蓹 d蓹 davam ed蓹k?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Xahi艧 edirik qurmaq ist蓹diyiniz paketl蓹ri se莽in."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "M枚vcud olan paketl蓹r axtar谋l谋r."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Se莽蓹n蓹kl蓹ri g枚st蓹r"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"X眉susi bir a莽谋l谋艧 disketi, Linuks sisteminizin normal bir sistem y眉kl蓹yiciy蓹 "
+"l眉z眉m\n"
+"olmadan a莽谋lmas谋na imkan ver蓹r. 茝g蓹 sisteminiz蓹 lilo (ya da grub) "
+"qurmayacaqsan谋z,\n"
+"ya da ba艧qa bir 蓹m蓹liyyat sistemi liloyu sil蓹rsa ya da lilo "
+"avadanl谋臒谋n谋zlai艧l蓹m蓹zs蓹\n"
+"bu disket siz蓹 yard谋m莽i olacaqd谋r. Sonradan Mandrake qurtarma disketi "
+"r蓹smini\n"
+"istifad蓹 ed蓹r蓹k d蓹 bu disket yarad谋la bil蓹r.\n"
+"A莽谋l谋艧 disketi yaratmaq ist蓹yirsiniz?\n"
+"A莽谋l谋艧 disketi yaratmaq ist蓹yirsinizs蓹, birinci disket s眉r眉c眉y蓹 disket "
+"yerl蓹艧dirin\n"
+"v蓹 \"OLDU\" bas谋n."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "%s 眉莽眉n LVM M蓹ntiqi Cildini istifad蓹 ed蓹 bilm蓹zsiniz"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "Norfolk Adalar谋"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Paket Qrup Se莽kisi"
+msgid "Theme installation failed!"
+msgstr "Qurulu艧 sinifini se莽in"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "%s fayl谋 oxunurkan x蓹ta oldu"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Loopback 眉莽眉n istifad蓹 et"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "pppoe istifad蓹 et"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Yeni b枚lm蓹l蓹r 眉莽眉n bo艧 sah蓹 yoxdur"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "SINAQ M茝RH茝L茝S陌ND茝K陌 3D s眉r'蓹tl蓹ndirm蓹 d蓹st蓹kli XFree %s"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "茝trafl谋"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+msgid "More Options"
+msgstr "Modul se莽蓹n蓹kl蓹ri:"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "茝fqan谋stan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron, istifad蓹莽il蓹r蓹 x眉susi 蓹mrl蓹ri periodik olaraq i艧蓹 sala bil蓹n\n"
+"standart bir UNIX proqram谋d谋r. vixie cron, standart cron'a 蓹lav蓹 edilmi艧 bir "
+"莽ox\n"
+"yeni x眉susiyy蓹t daxildir."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr ""
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "Diqq蓹tl蓹 Oxuyun!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Qap谋"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Qap谋lar谋 s谋na"
-
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "%s a莽谋la bilmir: %s\n"
+msgid "The encryption keys do not match"
+msgstr "Parollar uy臒un g蓹lmir"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Parolsuz"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
+msgid "Resolutions"
+msgstr "Rezolyusiyalar"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"tinyfirewall configurator\n"
+"\n"
+"Bu, Linuks Mandrake sisteminiz 眉莽眉n 艧蓹xsi bir firewall qura艧d谋racaqd谋r.\n"
+"Daha g眉cl眉 v蓹 e'tibarl谋 sistem 眉莽眉n xahi艧 edirik x眉susi MandrakeSecurity "
+"Firewall\n"
+"burax谋l谋艧谋n谋 t蓹dqiq edin."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "N枚vb蓹ni sil"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+msgid "Network configuration"
+msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS ba艧lay谋r"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "INFO"
+msgid "TB"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Sil"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s qurulumu iflas etdi. Olan x蓹ta:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giri艧 ist蓹mir蓹m"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Komp眉terinizi avtomatik olaraq X il蓹 a莽谋lmas谋 眉莽眉n qura bil蓹r蓹m.\n"
+"A莽谋l谋艧da X Window il蓹 ba艧lamaq ist蓹yirsiniz?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"B蓹li, bu istifad蓹莽i 眉莽眉n avtomatik giri艧 ist蓹yir蓹m (istifad蓹莽i, masa 眉st眉)"
+msgid "Build the disk"
+msgstr "Diski yarat"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Ba臒lant谋n谋 k蓹s"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "A莽谋l谋艧da X-Window sistemini ba艧lat"
+msgid "Status:"
+msgstr "Hal:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "Sistem modu"
+msgid "HTTP proxy"
+msgstr "HTTP v蓹kil verici"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS Verici"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "A莽谋l谋艧 Protokolu"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "X蓹ta"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
-msgstr "脰rt眉kl蓹r"
+msgid "allow \"su\""
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Paket se莽kil蓹rini saxla"
+msgid "Australia"
+msgstr "serial"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-"A莽谋l谋艧 陌dar蓹莽isi olaraq haz谋rda %s i艧l蓹dirsiniz.\n"
-"Qura艧d谋rma sehirbaz谋n谋 ba艧latmaq 眉莽眉n t谋qlay谋n."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "T蓹kc蓹 \"%s\" kart谋n谋 qur (%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Qurulu艧 sinifini se莽in"
+msgid "Level"
+msgstr "s蓹viyy蓹"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "NoV陌deo"
+msgid "Change the printing system"
+msgstr "艦蓹b蓹k蓹ni qur"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
+"Sizin sisteminiz 莽oxlu ba艧l谋q qura艧d谋rmas谋n谋 d蓹st蓹kl蓹yir.\n"
+"N蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "Xidm蓹tl蓹ri qur"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "mount failed: "
+msgstr "ba臒lama iflas etdi: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "茝ks"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Uzaq 脟ap Edici (lpd) Se莽蓹n蓹kl蓹ri"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Backup %s to %s.old"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Yeni b枚lm蓹 yarat"
+msgid "Selected All"
+msgstr "Fayl se莽"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Sistemi qur"
+msgid "Webmin Service"
+msgstr "avadanl谋q"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
+msgid "device"
+msgstr "avadanl谋q"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modu"
+msgid "All"
+msgstr "Ham谋s谋"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Hans谋 莽ap edici sistemini istifad蓹 etm蓹k ist蓹yirsiniz?"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greece"
+msgstr "Yunanca"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "An error occurred"
+msgstr "Bir x蓹ta oldu"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fayl/_脟谋x"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Bu paket yenil蓹nm蓹lidir\n"
+"Sistemd蓹n 莽谋xarmaq m枚vzusunda ciddisiniz?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Ermenic蓹 (yaz谋 ma艧谋n谋)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "/_File"
-msgstr "/_Fayl"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
+msgid "Printer manufacturer, model, driver"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Qurulumdan sonra istifad蓹 ed蓹 bil蓹c蓹yiniz ba艧qa dill蓹r se莽蓹 bil蓹rsiniz"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"%s avadanl谋臒谋nda medya yoxdur.\n"
+"Xahi艧 edirik. birini tax谋n."
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Qurulumdan 莽谋x"
+msgid "Printer on NetWare server"
+msgstr "脟ap Edici Vericisi"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
+#, c-format
+msgid "Give the ram size in MB"
+msgstr "Yadda艧 miqdar谋n谋 Mb cinsind蓹n verin"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "H蓹qiqi ad谋"
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Qurulumdan 莽谋x"
+msgid "done"
+msgstr "Qurtard谋"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konsol Vasit蓹l蓹ri"
+msgid "Please uncheck or remove it on next time."
+msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Report"
-msgstr "Qap谋"
+msgid "Higher"
+msgstr "Y眉ks蓹k"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "艦蓹kill蓹ndiril蓹c蓹k disk b枚lm蓹l蓹rini se莽in"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Xahi艧 edirik g枚zl蓹yin"
+msgid "Can't find %s on %s"
+msgstr "%s a莽谋la bilmir: %s\n"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Paket Qrup Se莽kisi"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Tan谋tma"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋 Sehirbaz谋"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "脟ap Edici"
+msgid "Japanese 106 keys"
+msgstr "Yaponca 106 d眉ym蓹li"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Windows Migration tool"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Urpmi"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Payla艧d谋rma ad谋"
+msgid "Delete selected rule"
+msgstr "N枚vb蓹ni sil"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Uzaq 脟ap Edici"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Uzaq CUPS vericisi"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Si莽an"
+msgid "Insert a floppy in %s"
+msgstr "%s s眉r眉c眉s眉n蓹 bir disket tax谋n"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Usta"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr "Maldiv"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "陌dar蓹 M蓹rk蓹zi"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "b蓹sit"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "HardDrake"
+msgid "1 minute"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "%d data yolunda, %d n枚'li\n"
+
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "陌lk D蓹f蓹 Sehirbaz谋na Xo艧 G蓹ldiniz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Laos"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "陌dar蓹 M蓹rk蓹zi"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "FAT b枚lm蓹si yoxdur ya da loopback 眉莽眉n laz谋mi yer burax谋lmay谋b"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parametrl蓹r"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Verici, Firewall/Ruter"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "陌nternet Ba臒lant谋s谋 Qura艧d谋r谋lmas谋"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP Al谋c谋s谋"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Eternet Kart谋"
+msgid "Printer Server"
+msgstr "脟ap Edici Vericisi"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Ke莽it"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Ba臒lant谋 n枚v眉:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Qura艧d谋rma"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "陌nternet ba臒lant谋s谋 qura艧d谋r谋lmas谋"
+msgid "Saint Pierre and Miquelon"
+msgstr "M眉q蓹dd蓹s Pyer v蓹 Migelion"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"He莽 陌nternet ba臒lant谋n谋z yoxdur.\n"
-"茝vv蓹lc蓹 onlar谋 'Qura艧d谋r'a basaraq qurun"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "F蓹al"
+#: ../../lang.pm:1
+#, c-format
+msgid "Portugal"
+msgstr "Portuqaliya"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr "Ba艧qa var?"
+
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "F蓹al"
+msgid ", printing to %s"
+msgstr "%s fayl谋na yazark蓹n x蓹ta oldu"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP al谋c谋s谋"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "A莽谋l谋艧da ba艧lad谋l谋r"
+msgid "Toggle to normal mode"
+msgstr "Normal moda ke莽"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "A莽谋l谋艧 Protokolu"
+msgid "Generic"
+msgstr "脺mumi"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Silindr %d -d蓹n silindr %d-y蓹\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+msgid "New profile..."
+msgstr "Yeni profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+msgid "Which disk do you want to move it to?"
+msgstr "Hans谋 disk蓹 da艧谋maq ist蓹yirsiniz?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
msgstr ""
-"Qurulu ara 眉z眉n眉z yoxdure.\n"
-"茝vv蓹lc蓹 onlar谋 'Qura艧d谋r'a basaraq qurun"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Ba臒lan..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "NIS sah蓹si"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "Ba臒lant谋n谋 K蓹s..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Ara 脺z %s (%s modulu i艧l蓹dilir)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not connected"
-msgstr "Ba臒l谋 deyil"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connected"
-msgstr "Ba臒land谋"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Vallis v蓹 Futuna Adalar谋"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Interface:"
-msgstr "Ara 眉z"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gateway:"
-msgstr "Ke莽it:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Apply"
-msgstr "茝lav蓹 Et"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Bu xidm蓹t haqq谋nda t蓹蓹s眉f ki,\n"
+"蓹lav蓹 m蓹'lumat yoxdur."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Sehirbaz..."
+msgid "Is this correct?"
+msgstr "Do臒rudur?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Status:"
-msgstr "Hal:"
+msgid "Marshall Islands"
+msgstr "Mar艧al Adalar谋"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "\"Windows\"u sil"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "N枚v: "
+msgid "Root password"
+msgstr "Root parolunu qur"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "陌nternet imkan谋"
+msgid "Build All Kernels -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Ev sahibi ad谋:"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Yerli 艦蓹b蓹k蓹ni Qura艧d谋r..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Bir swap sah蓹niz yoxdur\n"
+"Davam edim?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "State"
-msgstr "Hal:"
+msgid "Server IP missing!"
+msgstr "脟ap Edici Ev sahibi"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "S眉r眉c眉"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "CDd蓹n A莽谋l谋艧谋 F蓹alla艧d谋r谋m?"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "Ara 眉z"
+msgid "Graphical Environment"
+msgstr "Qrafiki Ara 脺z"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "陌nternet ke莽i艧ini Qur..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
+msgid "on Tape Device"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "amma ox艧am谋r"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "Yeni profil..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP Al谋c谋s谋"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Silin蓹c蓹k profil:"
+msgid "Filesystem type: "
+msgstr "Fayl sistemi n枚v眉: "
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Del profile..."
-msgstr "Profili sil..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Ba臒lant谋n谋z ba艧lad谋l谋r..."
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋 (%d adapter)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vyetnam"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "陌zah"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Help"
+msgstr "Yard谋m"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"D眉zg眉n mkbootdisk apar谋la bilmir: \n"
-" %s \n"
-" %s"
+msgid "Your personal phone number"
+msgstr "Sizin 艧蓹xsi telefon n枚mr蓹niz"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Fork edil蓹 bilmir: %s"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Hans谋 sektora da艧谋maq ist蓹yirsiniz?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"%s avadanl谋臒谋nda medya yoxdur.\n"
-"Xahi艧 edirik. birini tax谋n."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "%s avadanl谋臒谋nda medya oldu臒undan 蓹min olun"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Build the disk"
-msgstr "Diski yarat"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr "N蓹tic蓹"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Remove a module"
-msgstr "Modulu 莽谋xart"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Add a module"
-msgstr "Modul 蓹lav蓹 et"
+"S谋naq s蓹hif蓹si 莽ap edici vasit蓹sin蓹 g枚nd蓹rildi.\n"
+"脟ap edicinin i艧l蓹m蓹si 眉莽眉n bir az vaxt ke莽蓹r.\n"
+"D眉z m眉 i艧l蓹yir?"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "scsi modullar谋 ke莽"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "陌stifad蓹莽i ad谋"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "if needed"
-msgstr "laz谋m olarsa"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "raid modullar谋 ke莽"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) 脟ap Edici Se莽蓹n蓹kl蓹ri"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "force"
-msgstr "zorla"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "mkinitrdin arzuya ba臒l谋 olan arqumentl蓹ri"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Expert Area"
-msgstr "Ustalar谋n Sah蓹si"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "kernel version"
-msgstr "莽蓹yird蓹k burax谋l谋艧谋"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Protocol for the rest of the world"
+msgstr "B眉t眉n d眉nya"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "蓹sas"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print test pages"
+msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "General"
-msgstr "脺mumi"
+msgid "64 MB or more"
+msgstr "64 MB v蓹 ya daha 莽ox"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "a莽谋l谋艧 disketi yarad谋lmas谋"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size"
-msgstr "B枚y眉kl眉k"
+msgid "Not formatted\n"
+msgstr "艦蓹kill蓹ndirilm蓹mi艧\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Module name"
-msgstr "Modul ad谋"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Qurulumdan 莽谋x"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+msgid "PXE Server Configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "陌nit 陌smar谋c谋"
+msgid "Backup the system files before:"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Qurulum"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"陌nternet蓹 ba臒l谋 bir komp眉ter 眉莽眉n standart v蓹 t枚vsiy蓹 edil蓹n bir "
+"t蓹hl眉k蓹sizlik s蓹viyy蓹sidir."
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "First floppy drive"
+msgstr "陌lk disket s眉r眉c眉"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Fayl/_脟谋x"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Uzaq 脟ap Edici"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Fayl se莽"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Yeni b枚y眉kl眉k se莽in"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "here if no."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
-msgstr ""
+msgid "Faroe Islands"
+msgstr "Faro Adalar谋"
#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "Sistemi qur"
+msgid "Restart XFS"
+msgstr "m蓹hdudla艧d谋r"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "脟ap Edici"
+msgid "Please enter the directory to save to:"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Dayand谋r"
+msgid "Model name"
+msgstr "Modul ad谋"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "陌艧 Yeri"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "Albaniya"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "艦蓹kill蓹ndiril蓹c蓹k disk b枚lm蓹l蓹rini se莽in"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "Britaniya Hind Okean谋 Sah蓹si"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normal Mod"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "About"
-msgstr "Dayand谋r"
+msgid "Printer connection type"
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Ba臒lama n枚qt蓹si"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+msgid "Network %s"
+msgstr "艦蓹b蓹k蓹 ara 眉z眉"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Uninstall Fonts"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "B枚lm蓹 艧蓹kill蓹ndirilm蓹si"
+msgid "Connect %s"
+msgstr "Ba臒lan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "done"
-msgstr "Qurtard谋"
+msgid "Restarting CUPS..."
+msgstr "m蓹hdudla艧d谋r"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "m蓹hdudla艧d谋r"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "m蓹hdudla艧d谋r"
+msgid "Duplicate mount point %s"
+msgstr "%s ba臒lama n枚qt蓹sini 莽oxalt"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Ba臒lant谋 qura艧d谋r谋lmas谋"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "脺mumi"
+
+#: ../../help.pm:1
#, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Quit"
+msgstr "脟谋x"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Avtomatik ay谋r"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "X蓹tal谋 bloklar s谋nans谋nm谋?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Dig蓹r"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "Uzaq 脟ap Edici"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Qurulum haz谋rlan谋r"
+msgid "Authentication NIS"
+msgstr "NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts copy"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+"``茝mr s蓹tiri se莽蓹n蓹kl蓹rini m蓹hdudla艧d谋r`` se莽蓹n蓹yi parolsuz bir i艧蓹 yaramaz"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si f蓹alla艧d谋r谋ld谋"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Card IO_0"
+msgstr "Kart IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "Birl蓹艧mi艧 茝r蓹b 茝mirlikl蓹ri"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Card IO_1"
+msgstr "Kart IO_1"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
+msgstr "Tayland"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "parse all fonts"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "Qazaxstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"陌nternet Ba臒lant谋s谋 B枚l眉艧d眉rm蓹 vasit蓹sin蓹 Xo艧 G蓹ldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Qura艧d谋rma sehirbaz谋n谋 a莽maq 眉莽眉n Qura艧d谋ra t谋qlay谋n."
+msgid "Mandrake Linux Installation %s"
+msgstr "Linuks-Mandrake Qurulumu %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "陌nternet ba臒lant谋s谋 b枚l眉艧d眉r眉lm蓹si qura艧d谋r谋lmas谋"
+msgid "Thai keyboard"
+msgstr "Thai klaviatura"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉rm蓹 Qura艧d谋rmas谋 apar谋lmay谋b."
+msgid "Dialup options"
+msgstr "脟evirm蓹li 艧蓹b蓹k蓹 se莽蓹n蓹kl蓹ri"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Qura艧d谋rma art谋q qurtar谋bd谋r v蓹 f蓹aliyy蓹td蓹dir."
+msgid "Bouvet Island"
+msgstr "Buvet Adas谋"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Qura艧d谋rma art谋q qurtar谋bd谋r, amma f蓹aliyy蓹ti dayand谋r谋l谋b."
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"H蓹r 艧ey quruldu.\n"
-"陌ndi is蓹 陌nternet ba臒lant谋n谋z谋 yerli 艧蓹b蓹k蓹d蓹k谋 ba艧qa komp眉terl蓹r il蓹 "
-"b枚l眉艧d眉r蓹 bil蓹rsiniz, bunun 眉莽眉n is蓹 avtomatik 艧蓹b蓹k蓹 qura艧d谋r谋lmas谋 (DHCP) "
-"i艧l蓹dilir."
+"Cd-Romu d蓹yi艧dirin!\n"
+"\n"
+"\"%s\" adl谋 Cd-Romu s眉r眉c眉n眉z蓹 tax谋n v蓹 OLDU'ya bas谋n.\n"
+"茝g蓹r Cd-Rom 蓹linizd蓹 deyils蓹 bu Cd-Rom'dan qurmamaq 眉莽眉n 陌MT陌NA ET'蓹 bas谋n."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurk蓹n x蓹ta oldu"
+msgid "Polish"
+msgstr "Polyakca"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptl蓹 qurulur, proqram t蓹'minat谋 qurulur, xidm蓹tl蓹r ba艧lad谋l谋r..."
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "陌dar蓹 M蓹rk蓹zi"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring..."
-msgstr "Qura艧d谋r谋l谋r..."
+msgid "\t-Network by webdav.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s qu臒usunda d蓹y蓹s蓹n bir LAN 眉nvan 莽ax谋艧mas谋 tap谋ld谋!\n"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"Sisteminizd蓹 艧蓹b蓹k蓹 kart谋 tap谋la bilm蓹yib.Avadanl谋臒谋 quran vasit蓹ni i艧蓹 "
+"sal谋n."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Yerli 脟ap Edici"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 d眉ym蓹li"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "ISDN ba臒lant谋n谋z谋n n枚v眉 n蓹dir?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Label"
+msgstr "Etiket"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Disket蓹 qeyd et"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "脟ap Edicisiz"
+msgid "Printer auto-detection"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "CUPS verici IP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Hans谋s谋 sizin ISDN kart谋n谋zd谋r?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS TCP/IP 艧蓹b蓹k蓹l蓹rind蓹 fayl b枚l眉艧眉lm蓹si 眉莽眉n istifad蓹 edil蓹n m蓹艧hur bir "
+"protokoldur.\n"
+"Bu xidm蓹t, /etc/exports fayl谋nda qur臒ular谋 olan NFS vericisinin\n"
+"istifad蓹sin蓹 imkan ver蓹r."
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "CUPS verici IP"
+msgid "Msec"
+msgstr "Si莽an"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "艧蓹b蓹k蓹 kart谋 tap谋lmad谋"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Se莽kiniz? (蓹sas %s) "
-#: ../../standalone/drakgw:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+"Yeni yarad谋lan b眉t眉n b枚lm蓹l蓹r 艧蓹kill蓹ndirilm蓹lidir\n"
+"(艧蓹kill蓹ndirm蓹k y蓹ni fayl sistemi yaratmaq - format).\n"
+"\n"
+"\n"
+"Bu arada var olan haz谋r b枚lm蓹l蓹ri d蓹 眉st眉nd蓹kil蓹ri silm蓹k 眉莽眉nyenid蓹n "
+"艧蓹kill蓹ndirm蓹k ist蓹ya\n"
+"bil蓹rsiniz.\n"
+"Bunu ist蓹yirsinizs蓹 bu b枚lm蓹l蓹ri d蓹 se莽m蓹lisiniz.\n"
+"\n"
+"\n"
+"Bunu a臒l谋n谋zda tutun ki var olan b眉t眉n b枚lm蓹l蓹ri 艧蓹kill蓹ndirm蓹k\n"
+"m蓹cburi deyil.\n"
+"陌艧l蓹tim sist蓹mini 蓹m蓹l蓹 g蓹tir蓹n b枚lm蓹l蓹ri (y蓹ni\n"
+"\"/\", \"usr\" v蓹 ya \"var\"谋 yenid蓹n 艧蓹kill蓹ndirm蓹k 眉莽眉n\n"
+"se莽蓹 bil蓹rsiniz. Veril蓹r olan \"home\"u m蓹s蓹l蓹 toxunulmadan\n"
+"buraxa bil蓹rsiniz.\n"
+"\n"
+"\n"
+"Diqq蓹tli olun. 艧蓹kill蓹ndirdiyiniz b枚lm蓹l蓹rd蓹ki veril蓹r\n"
+"geri g蓹lm蓹z.\n"
+"\n"
+"\n"
+"艦蓹kill蓹ndirm蓹y蓹 haz谋r is蓹niz \"Oldu\" d眉ym蓹sini t谋qlay谋n.\n"
+"\n"
+"\n"
+"Yeni Linuks Mandrake sisteminizi qurmaq 眉莽眉n ba艧qa b枚lm蓹 se莽m蓹k\n"
+"ist蓹yirsiniz is蓹 \"L蓹臒v et\" d眉ym蓹sin蓹 bas谋n."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Frans谋zca"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "脟ex dili (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "%s qap谋s谋nda tap谋ld谋"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "脟ap Edici Vericisi"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "M眉nd蓹ricat"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "陌nternet qur臒ular谋"
+msgid "Next"
+msgstr "Sonrak谋 ->"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "陌nternet qur臒ular谋"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Sistem y眉kl蓹yicisini haraya qurmaq ist蓹yirsiniz?"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
+msgid "CHAP"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Monitor qurulmay谋b"
+#: ../../lang.pm:1
+#, c-format
+msgid "Puerto Rico"
+msgstr "Porto Riko"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli 艦蓹b蓹k蓹y蓹 ba臒layacaq adapteri se莽in"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litvanya dili \"number row\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Sistemnizd蓹 bir d蓹n蓹 qurulmu艧 艧蓹b蓹k蓹 adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli 艦蓹b蓹k蓹 adapterinizi qurmaq 眉z蓹r蓹y蓹m?"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "艦蓹b蓹k蓹 ara 眉z眉"
+msgid "Anguilla"
+msgstr "Anquilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS sah蓹si"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Sisteminizd蓹 艧蓹b蓹k蓹 kart谋 tap谋la bilm蓹yib.Avadanl谋臒谋 quran vasit蓹ni i艧蓹 "
-"sal谋n."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+msgid "Antarctica"
+msgstr "Antarktika"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Interface %s"
-msgstr "Ara 眉z %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Mount options"
+msgstr "Modul se莽蓹n蓹kl蓹ri:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara 脺z %s (%s modulu i艧l蓹dilir)"
+msgid "Jamaica"
+msgstr "Yamayka"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "脟ap Edici Vericisi"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Komp眉ter谋n谋zi 陌nternet ba臒lant谋s谋n谋 b枚l眉艧d眉rm蓹k 眉莽眉n qura艧d谋r谋rs谋n谋z.\n"
-"Bu se莽蓹n蓹kl蓹 yerli 艧蓹b蓹k蓹nizd蓹ki ba艧qa komp眉terl蓹r sizin 陌nternet "
-"ba臒lant谋n谋zdan faydalana bil蓹c蓹kl蓹r.\n"
-"\n"
-"X蓹b蓹darl谋q: Yerli 艦蓹b蓹k蓹 (LAN) qurmaq 眉莽眉n uy臒un 艦蓹b蓹k蓹 Adapterin蓹 "
-"ehtiyac谋n谋z var."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si"
+msgid "Please wait, preparing installation..."
+msgstr "Xahi艧 edirik g枚zl蓹yin, qurulum haz谋rlan谋r"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si indi a莽谋ld谋"
+msgid "Czech (QWERTZ)"
+msgstr "脟ex dili (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Xidm蓹tl蓹r f蓹alla艧d谋r谋l谋r..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The port number should be an integer!"
+msgstr "Qap谋 n枚mr蓹si r蓹q蓹ml蓹 yaz谋lmal谋d谋r"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "脟ap Edici avadanl谋臒谋 URI"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "Disketd蓹n geri 莽a臒谋r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dismiss"
-msgstr "ke莽"
+msgid "Add to LVM"
+msgstr "LVM蓹 蓹lav蓹 et"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "yenid蓹n qura艧d谋r"
+msgid "DNS server"
+msgstr "DNS verici"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "enable"
-msgstr "f蓹alla艧d谋r"
+msgid "Trinidad and Tobago"
+msgstr "Trinidad v蓹 Tobaqo"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-"陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si qurulmas谋 art谋q bitdi.\n"
-"V蓹 art谋q passivl蓹艧dirilmi艧dir.\n"
-"\n"
-"N蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si passivl蓹艧dirildi"
+msgid "simple"
+msgstr "b蓹sit"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si indi ba臒land谋"
+msgid "Clear all"
+msgstr "Ham谋s谋n谋 t蓹mizl蓹"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No test pages"
+msgstr "B蓹li, h蓹r iki s谋naq s蓹hif蓹sini d蓹 莽ap et"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Vericil蓹r ba臒lan谋r..."
+msgid "Adapter %s: %s"
+msgstr "%s Adapteri: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "disable"
-msgstr "passivl蓹艧dir"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Fokland Adalar谋 (Malvin)"
-#: ../../standalone/drakgw:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Unknown model"
msgstr ""
-"陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si qurulmas谋 art谋q bitdi.\n"
-"V蓹 art谋q f蓹alla艧d谋r谋lm谋艧d谋r.\n"
-"\n"
-"N蓹 etm蓹k ist蓹yirsiniz?"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si f蓹alla艧d谋r谋ld谋"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Tan谋tma"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now"
+msgstr "Fayl sistemi qur臒ular谋"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "/_File"
+msgstr "/_Fayl"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Linuks 2.2 seriyas谋 莽蓹kird蓹kl蓹rind蓹 firewall\n"
+"qurmaq 眉莽眉n 眉莽眉n paket s眉z眉lm蓹sini ba艧lat."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Path"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mayotte"
+msgstr "Mayot"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "陌艧 qrupu"
+msgid "Searching for scanners ..."
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "陌stifad蓹莽i ad谋"
+msgid "Partitioning"
+msgstr "脟ap Edici"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Paket se莽kil蓹rini saxla"
+msgid "Russia"
+msgstr "Rusca"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "eternet kart tap谋ld谋"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+msgid "Syslog"
+msgstr "sistem qeydi"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr "Avtomatik yerl蓹艧dirm蓹 眉莽眉n bo艧 sah蓹 yoxdur"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Set root password"
+msgstr "Root parolunu qur"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Set-UID"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "sticky-bit"
+msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
+"%s b枚lm蓹si b枚y眉kl眉y眉 d蓹yi艧dirildirkd蓹n sonra bu b枚lm蓹d蓹ki b眉t眉n m蓹'lumatlar "
+"silin蓹c蓹kdir"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Property"
-msgstr "Qap谋"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Burax谋l谋艧: %s\n"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "陌stifad蓹莽ini q蓹bul et"
-
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "browse"
-msgstr ""
+msgid "Internet connection configuration"
+msgstr "陌nternet ba臒lant谋s谋 qura艧d谋r谋lmas谋"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Edit current rule"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "edit"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "N枚vb蓹ni sil"
+msgid "/_About..."
+msgstr "/K枚m蓹k/_Haqq谋nda..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "delete"
-msgstr "Sil"
+msgid "Bengali"
+msgstr "f蓹alla艧d谋r"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "脟ap Edicisiz"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr "X眉susiyy蓹tl蓹r: "
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Modul 蓹lav蓹 et"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Wizard..."
+msgstr "Sehirbaz..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Down"
-msgstr "Qurtard谋"
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "A莽谋l谋艧 disketi yarat"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Solomon Islands"
+msgstr "Solomon Adalar谋"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Workgroup"
+msgstr "陌艧 qrupu"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP"
+msgstr "脟ap Edici Ev sahibi"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "b枚lm蓹 %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "脟ap edici ad谋 t蓹kc蓹 h蓹rf, r蓹q蓹m v蓹 alt x蓹tt daxil ed蓹 bil蓹r"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "group"
-msgstr "陌艧 qrupu"
+msgid "Show current interface configuration"
+msgstr "陌nternet qur臒ular谋"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "陌stifad蓹莽i ad谋"
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "T蓹cr眉bi"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Done"
+msgstr "Qurtard谋"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Avtomatik qurulum disketi haz谋rlan谋r"
+msgid "Web Server"
+msgstr "Verici"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "脟ili"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Yerli 脟ap Edici"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
-
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s art谋q 蓹lav蓹 edilmi艧dir)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Ara 脺z %s (%s modulu i艧l蓹dilir)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "陌nternet蓹 ba臒lanmaq 眉莽眉n 艧蓹b蓹k蓹 adapteri se莽in."
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Komp眉ter谋n谋zi 陌nternet ba臒lant谋s谋n谋 b枚l眉艧d眉rm蓹k 眉莽眉n qura艧d谋r谋rs谋n谋z.\n"
-"Bu se莽蓹n蓹kl蓹 yerli 艧蓹b蓹k蓹nizd蓹ki ba艧qa komp眉terl蓹r sizin 陌nternet "
-"ba臒lant谋n谋zdan faydalana bil蓹c蓹kl蓹r.\n"
-"\n"
-"X蓹b蓹darl谋q: Yerli 艦蓹b蓹k蓹 (LAN) qurmaq 眉莽眉n uy臒un 艦蓹b蓹k蓹 Adapterin蓹 "
-"ehtiyac谋n谋z var."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+msgid "Add/Del Users"
+msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 Qura艧d谋r谋lmas谋"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Xahi艧 edirik g枚zl蓹yin, qurulum haz谋rlan谋r"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Qur臒ular"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "System Options"
-msgstr "Modul se莽蓹n蓹kl蓹ri:"
+msgid "Here is the full list of available countries"
+msgstr "B眉t眉n m枚vcud klaviaturalar谋n siyah谋s谋"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Modul se莽蓹n蓹kl蓹ri:"
+msgid "Alternative test page (A4)"
+msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"A艧a臒谋dak谋 siyah谋dak谋 b眉t眉n CD'l蓹r蓹 sahib is蓹niz, OLDU'ya bas谋n.\n"
+"CD'l蓹rin he莽 birin蓹 sahib deyils蓹niz, 陌MT陌NA ET'蓹 bas谋n.\n"
+"CD'l蓹rd蓹n b蓹'zil蓹i 蓹ksik is蓹, onlar谋 se莽ili v蓹ziyy蓹td蓹n 莽谋xard谋b OLDU'ya "
+"bas谋n."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Uzaq 脟ap Edici (lpd) Se莽蓹n蓹kl蓹ri"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+msgid "Backup user files"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (茝sas)"
+msgid "New"
+msgstr "yeni"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Ba臒l谋 deyil"
+msgid "Load from floppy"
+msgstr "Disketd蓹n geri 莽a臒谋r"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "A艧a臒谋dak谋 paketl蓹r sistemd蓹n silin蓹c蓹kl蓹r"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Avadanl谋qlar tan谋n谋r..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "脟ap Edici avadanl谋臒谋 URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norve莽c蓹"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "脟ap Edici Ba臒lant谋s谋"
+msgid "Searching for new scanners ..."
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Monitorunuzu se莽in"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Monitorunuzu se莽in"
+msgid "select path to restore (instead of /)"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Xidm蓹tl蓹ri qur"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "China"
+msgstr "脟in"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Monitorunuzu se莽in"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Sistemi qur"
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "G眉rc眉stan"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "avadanl谋q"
+msgid "Reading data of installed printers..."
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "verici"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "%s s眉r眉c眉s眉n蓹 FAT 艧蓹kill蓹ndirilmi艧 bir disket tax谋n"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "L眉td蓹n G枚zl蓹yin... Qur臒ular 蓹lav蓹 edilir"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Emeliyyat sistemi secici GRUB'a xos g蓹lmissiniz!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Payla艧d谋rma ad谋"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Rezolyusiya"
-
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "a莽谋l谋艧 disketi yarad谋lmas谋"
-
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "Ev sahibi ad谋"
-#: ../../standalone/drakxtv:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP 眉nvan谋 1.2.3.4 艧蓹klind蓹 olmal谋d谋r"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Ecuador"
+msgstr "Ekvador"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "陌stifad蓹莽i 蓹lav蓹 et"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Have a nice day!"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Paketl蓹r qurulurk蓹n bir x蓹ta oldu:"
-
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning for TV channels"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Area:"
-msgstr ""
+msgid "Shell"
+msgstr "Qab谋q"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome v蓹 Prinsip"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Frans谋zca"
+msgid "Azerbaidjani (latin)"
+msgstr "Az蓹rbaycanca (lat谋n)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Avropa"
+msgid "Package not installed"
+msgstr "Qurulumdan 莽谋x"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Usta"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "American Samoa"
+msgstr "Amerikan Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Frans谋zca (Kanada/Quebec)"
+msgid "Copy fonts on your system"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USA (cable-hrc)"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USA (cable)"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "陌nternet qur臒ular谋"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "primary"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d saniy蓹 sonra 莽谋x谋lacaq"
-
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "脺mumi"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "unknown"
-msgstr "bilinm蓹y蓹n"
+msgid "You can't select/unselect this package"
+msgstr "Bu paketi se莽蓹 bilm蓹zsiniz/sistemd蓹n 莽谋xarda bilm蓹zs谋n谋z"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "X蓹b蓹rdarl谋q"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Run config tool"
+msgid ""
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Si莽an qur臒ular谋"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Information"
-msgstr "M蓹'lumat谋 g枚st蓹r"
+msgid "Remote host name"
+msgstr "Uzaqdak谋 ev sahibi ad谋"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Avadanl谋q m蓹'lumat谋na bax"
+msgid "deactivate now"
+msgstr "F蓹al"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Sabit disk se莽kisi"
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "%s qap谋s谋nda tap谋ld谋"
+msgid "Computing the size of the Windows partition"
+msgstr "Windows b枚lm蓹sind蓹ki bo艧 sah蓹ni i艧l蓹t"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Author:"
-msgstr "Avtomatik yoxla"
+msgid "Italy"
+msgstr "陌talyanca"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
-msgstr ""
+msgid "Name of printer"
+msgstr "脟ap edici ad谋"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/K枚m蓹k/_Haqq谋nda..."
+msgid "disable"
+msgstr "passivl蓹艧dir"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "%s ayr谋l谋rk蓹n x蓹ta oldu: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Ekran kart谋n谋z谋 se莽in"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Kayman Adalar谋"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake help"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "陌zah"
+msgid "Select model manually"
+msgstr "Uzaq 脟ap Edici"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_K枚m蓹k"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "脟谋x"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+msgid "Format"
+msgstr "艦蓹kill蓹ndir"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_Se莽蓹n蓹kl蓹r"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"ADSL il蓹 internet蓹 ba臒lanman谋n 蓹n yax艧谋 yolu pppoe'dur.\n"
+"B蓹zi ba臒lant谋lar pptp istifad蓹 edir, 莽ox az谋 is蓹 dhcp i艧l蓹dir.\n"
+"Bilmirsiniz is蓹 'pppop istifad蓹 et'i se莽in"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "Various"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the vendor name of the device"
+msgid "Zip"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Si莽an谋n谋z谋n ba臒l谋 oldu臒u serial Qap谋y谋 se莽in."
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "艦蓹kill蓹ndirilir"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "PDQ"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "network printer port"
-msgstr "艦蓹b蓹k蓹 脟ap Edicisi (soket) "
+msgid "Albanian"
+msgstr "Farsca"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Ad: "
+msgid "Lithuania"
+msgstr "Litvaniya"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 d眉ym蓹li"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "B蓹sit"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 d眉ym蓹li"
+msgid "Detected model: %s %s"
+msgstr "%s tap谋ld谋"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Official vendor name of the cpu"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modul ad谋"
-
-#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Si莽an"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Kart mem (DMA)"
+msgid "Local files"
+msgstr "Yerli 脟ap Edici"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "maybe"
+msgstr "b蓹lk蓹"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Media class"
-msgstr ""
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "s蓹viyy蓹"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "艦蓹kill蓹ndir"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 min r蓹ng (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "B枚y眉kl眉y眉: %d KB\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "X il蓹 A莽谋l谋艧"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is FPU present"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "%d s蓹viyy蓹 RAID 眉莽眉n 莽atmayan sayda disk b枚lm蓹si\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"A艧a臒谋da yaz谋莽谋dak谋 n枚vb蓹l蓹r verilmi艧dir.\n"
+"Yenil蓹rini 蓹lav蓹 ed蓹 bil蓹r, v蓹 ya m枚vcud olanlar谋 d蓹yi艧dir蓹 bil蓹rsiniz."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Connected"
+msgstr "Ba臒land谋"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "脟ap Edicisiz"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Macedonian"
+msgstr "Makedoniya dili"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Flags"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "/File/_Save"
+msgstr "/Fayl/_Qeyd Et"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "Mali"
+
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Si莽an"
+msgid "No details"
+msgstr "茝trafl谋"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "very nice"
+msgstr "蓹la"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Ke莽it avadanl谋臒谋"
+msgid "Preview"
+msgstr "avadanl谋q"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "Uzaq 脟ap Edici"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Fayl se莽"
+msgid "Please select media for backup..."
+msgstr "Xahi艧 edirik istifad蓹 眉莽眉n bir dil se莽in."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 verici: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP Al谋c谋s谋"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "G眉rc眉 dili (\"Rus\" s谋ras谋)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Se莽蓹n蓹kl蓹r"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
+msgid "Your printer model"
+msgstr "Uzaq 脟ap Edici"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "陌nternet qur臒ular谋"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Hal:"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Drive capacity"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "USB avadanl谋臒谋n谋z 眉莽眉n s眉r眉c眉l蓹ri y眉kl蓹yin."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "par莽a b枚y眉kl眉y眉"
+msgid "Disk"
+msgstr "Danimarka dili"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "脟ap Edici avadanl谋臒谋 URI"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Israel"
+msgstr "陌srail"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
+msgid "French Guiana"
+msgstr "Frans谋z Gvineyas谋"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "default:LTR"
+msgstr "default:LTR"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Tan谋tma"
+msgid "add a rule"
+msgstr "Modul 蓹lav蓹 et"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "A command line must be entered!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bogomips"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Transfer printer configuration"
+msgstr "陌nternet qur臒ular谋"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Channel"
-msgstr "L蓹臒v et"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Ba臒lant谋n谋z谋 a莽谋l谋艧da ba艧latmaq ist蓹yirsiniz?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Qap谋"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Bus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "S谋naq s蓹hif蓹si 莽ap edilir..."
-
-#: ../../standalone/keyboarddrake:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silm蓹 funksyas谋n谋 g枚rm蓹yini ist蓹yirmisiniz?"
+msgid "Accept user"
+msgstr "陌stifad蓹莽ini q蓹bul et"
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura qurulu艧unu se莽iniz."
+msgid "Server"
+msgstr "Verici"
-#: ../../standalone/livedrake:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "T蓹kmill蓹艧dirm蓹 i艧i ba艧laya bilmir !!!\n"
+msgid "Bad choice, try again\n"
+msgstr "X蓹tal谋 t蓹rcih, t蓹krar s谋nay谋n\n"
-#: ../../standalone/livedrake:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Heard and McDonald Islands"
+msgstr "Hird Adas谋 v蓹 Mkdonald Adalar谋"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+msgid "No alternative driver"
msgstr ""
-"Qurma Cd-Romunu s眉r眉c眉n眉z蓹 tax谋n v蓹 OLDUya bas谋n.\n"
-"茝g蓹r Cd-Rom 蓹linizd蓹 yox is蓹, bu Cd-Rom-dan qurmamaq 眉莽眉n R茝DD ET蓹 bas谋n."
-#: ../../standalone/livedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu d蓹yi艧dir"
+msgid "Toggle to expert mode"
+msgstr "Usta moduna ke莽"
-#: ../../standalone/localedrake:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP 眉nvan谋 1.2.3.4 艧蓹klind蓹 olmal谋d谋r"
+
+#: ../../network/modem.pm:1
#, c-format
-msgid "Save as.."
-msgstr "F蓹rqli qeyd et..."
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Xahi艧 edirik t蓹krar s谋nay谋n"
+msgid "Looking at packages already installed..."
+msgstr "Bu paketi sistemd蓹n 莽谋xarda bilm蓹zs谋n谋z. Art谋q qurulmu艧dur."
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Qura艧d谋rma"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Driver"
+msgstr "S眉r眉c眉"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf sistem qur臒ular谋n谋z谋 idar蓹 ed蓹n proqramlar谋\n"
+"m眉xt蓹lif v蓹zif蓹l蓹ri a莽谋l谋艧da icra ed蓹r."
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "艦蓹kill蓹ndirilir"
+msgid "Printer on remote lpd server"
+msgstr "Uzaq 莽ap edici vericisi(lpd)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "service setting"
-msgstr "avadanl谋q"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot NewWorld MacIntosh avadal谋臒谋 眉莽眉n a莽谋l谋艧 idar蓹cisidir. Ayr谋ca\n"
+"GNU/Linuks, MacOS, v蓹 ya MacOSX sisteml蓹rini komp眉terinizd蓹 varsa, "
+"a莽acaqd谋r.\n"
+"Normalda, bu 蓹m蓹liyyat sisteml蓹ri d眉zg眉n tap谋l谋b qurula bilirl蓹r\n"
+"茝g蓹r bel蓹 olmazsa, bu ekrandan 蓹ll蓹 laz谋mi qur臒ular谋 gir蓹 bil蓹rsiniz.\n"
+"D眉zg眉n parametrl蓹ri girib girm蓹diyinizi yax艧谋ca bir yoxlay谋n.\n"
+"\n"
+"\n"
+"Yaboot ana se莽蓹n蓹kl蓹ri:\n"
+"\n"
+"\n"
+" - Ba艧lan臒谋c 陌smar谋c谋: A莽谋l谋艧dan 蓹vv蓹l 莽谋xan sad蓹 bir ismar谋c.\n"
+"\n"
+"\n"
+" - A莽谋l谋艧 Avadanl谋臒谋: GNU/Linuksu hardan ba艧latmaq ist蓹diyinizi bildirir."
+"脺mumiyy蓹tl蓹 bu m蓹'lumat谋 daha 蓹vv蓹l \"bootstrap\" qura艧d谋r谋lmas谋 "
+"s谋ras谋ndabildirmi艧 olacaqs谋n谋z.\n"
+"\n"
+"\n"
+" - A莽谋q Firmware Gecikm蓹si: LILOdan f蓹rqli olaraq, yabootda iki d蓹n蓹 "
+"gecikm蓹 vard谋r\n"
+"Birinci gecikm蓹 saniy蓹l蓹rl蓹 枚l莽眉l眉r v蓹 bu arada siz\n"
+"CD, OF a莽谋l谋艧谋, MacOS v蓹 ya Linuks aras谋nda se莽ki aparmal谋s谋n谋z.\n"
+"\n"
+"\n"
+" - Kernel A莽谋l谋艧 Vaxt Dolmas谋: Bu vaxt dolmas谋 LILO a莽谋l谋艧 gecikm蓹sin蓹 "
+"uy臒un g蓹lir. Linuksu\n"
+"se莽dikd蓹n sonra ana kernel parametri olaraq bu gecikm蓹 0.1 saniy蓹 olaraq "
+"qurulu olacaqd谋r.\n"
+"\n"
+"\n"
+" - CD A莽谋l谋艧谋 F蓹alla艧s谋nm谋?: Bu se莽蓹n蓹kl蓹 CDd蓹n a莽谋l谋艧谋 timsal ed蓹n 'C' "
+"xarakteri ilk a莽谋l谋艧da 莽谋xacaqd谋r.\n"
+"\n"
+"\n"
+" - OF A莽谋l谋艧谋 F蓹alla艧s谋n?: Bu se莽蓹n蓹kl蓹 OFd蓹n (Open Firmware) a莽谋l谋艧谋n谋 "
+"timsal ed蓹n 'N' xarakteri\n"
+"ilk a莽谋l谋艧da 莽谋xacaqd谋r.\n"
+"\n"
+"\n"
+" - Ana OS: OF gecikm蓹si m眉dd蓹ti doldu臒u vaxt hans谋 OSnin a莽谋laca臒谋n谋 "
+"g枚st蓹rir."
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "脟ap Edici Vericisi"
+#: ../../mouse.pm:1
+#, c-format
+msgid "No mouse"
+msgstr "Si莽ans谋zs"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "avadanl谋q"
+msgid "Germany"
+msgstr "Almanca"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS Verici"
+msgid "Austria"
+msgstr "serial"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS Verici"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix m蓹ktub vericisi, Inn x蓹b蓹r vericisi"
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Collapse Tree"
+msgstr "A臒ac谋 Qapat"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS Verici"
+msgid "Auto Install Configurator"
+msgstr "Qurulum sonras谋 qur臒ular"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Sah蓹(domain) ad谋"
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "艦蓹b蓹k蓹ni qur"
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "Sistem y眉kl蓹yicisini haraya qurmaq ist蓹yirsiniz?"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
"\n"
-"Here, you'll be able to set up the alert system.\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mail alert"
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahi艧 edirik, g枚zl蓹yin, fayl daran谋r: %s"
+msgid "DHCP client"
+msgstr "DHCP al谋c谋s谋"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Fayl m蓹zmunu"
+msgid "Restoring from file %s failed: %s"
+msgstr "%s fayl谋ndan qurtar谋l谋艧da x蓹ta: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Calendar"
-msgstr "T蓹qvim"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech mouse (serial ya da k枚hn蓹 C7 n枚v眉)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Fayl se莽"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "amma ox艧am谋r"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Ke莽it avadanl谋臒谋"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "matching"
-msgstr "ox艧ay谋r"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Settings"
-msgstr "Qur臒ular"
+msgid "Boot Style Configuration"
+msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Qeydl蓹riniz蓹 baxan vasit蓹"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "search"
-msgstr "axtar"
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Syslog"
-msgstr "sistem qeydi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "Ermenic蓹 (fonetik)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Messages"
-msgstr "ismar谋clar"
+msgid "Card model:"
+msgstr "Kart mem (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "User"
-msgstr "陌stifad蓹莽i ad谋"
+msgid "Thin Client"
+msgstr "DHCP Al谋c谋s谋"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/K枚m蓹k/_Haqq谋nda..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "NIS Verici"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Se莽蓹n蓹kl蓹r/S谋naq"
+msgid "Turkmenistan"
+msgstr "T眉rkm蓹nistan"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Fayl/-"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Uzaq 脟ap Edici"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Fayl/_F蓹rqli Qeyd Et"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Sistemi qur"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Preparing installation"
+msgstr "Qurulum haz谋rlan谋r"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fayl/_A莽"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fayl/_T蓹ze"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "T蓹kc蓹 bu g眉n眉nk眉n眉 g枚st蓹r"
+msgid "True Type fonts installation"
+msgstr "Qurulum haz谋rlan谋r"
-#: ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "3 d眉ym蓹 emulasiyas谋"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Xahi艧 edirik si莽an谋n谋z谋n n枚v眉n眉 se莽in."
+msgid "LAN configuration"
+msgstr "Yerli 艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Ba臒lan"
+msgid "hard disk model"
+msgstr "Kart mem (DMA)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Ba臒lant谋n谋 k蓹s"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "%s 眉莽眉n LVM M蓹ntiqi Cildini istifad蓹 ed蓹 bilm蓹zsiniz"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "received"
-msgstr ""
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Iranian"
+msgstr "Farsca"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Croatia"
+msgstr "X谋rvat谋stan"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "sent: "
-msgstr ""
+msgid "Gateway:"
+msgstr "Ke莽it:"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Yerli 脟ap Edici"
+msgid "Add server"
+msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "Uzaq 脟ap Edici"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "average"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "Avadanl谋q: "
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Qura艧d谋rma"
+msgid "Printerdrake"
+msgstr "脟ap Edici"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "License agreement"
+msgstr "Lisenziya s枚zl蓹艧m蓹si"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Ba臒lant谋 n枚v眉:"
+msgid "System Options"
+msgstr "Modul se莽蓹n蓹kl蓹ri:"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnection from the Internet complete."
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sini se莽in"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "陌nternet蓹 ba臒lan"
+msgid ", USB printer"
+msgstr "脟ap Edicisiz"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "陌nternet蓹 ba臒lan"
+msgid "Choose the applications that will support the fonts:"
+msgstr "艦蓹kill蓹ndiril蓹c蓹k disk b枚lm蓹l蓹rini se莽in"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Ba臒lant谋n谋z s谋nan谋r..."
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure X"
+msgstr "X qur"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "T眉rkc蓹 (蓹n蓹n蓹vi \"F\" klaviatura)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Congratulations!"
+msgstr "T蓹brikl蓹r!"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Ba臒lant谋 n枚v眉:"
+msgid "Use owner id for execution"
+msgstr "Avtomatik t蓹sbit i艧l蓹t"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Down"
+msgstr "Qurtard谋"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Fayla qeyd et"
+msgid "Install rpm"
+msgstr "Qurulum"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Statistics"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profil: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "艦蓹b蓹k蓹 qura艧d谋r谋lmas谋"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Qalan m眉dd蓹t"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Yerli 脟ap Edici"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "UK keyboard"
+msgstr "陌ngiliz (UK) klaviaturas谋"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "Unmount"
+msgstr "Ay谋r"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Uninstall Fonts"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Ekran kart谋n谋z谋 se莽in"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Xahi艧 edirik si莽an谋n谋z谋 se莽in"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German (no dead keys)"
+msgstr "Almanca (枚l眉 d眉ym蓹l蓹r olmas谋n)"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Yerli 脟ap Edici"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 min r蓹ng (15 bits)"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "ox艧ay谋r"
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "N枚vb蓹ni sil"
+msgid "Reboot"
+msgstr "K枚k"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s tap谋ld谋"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Qambiya"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Add host"
-msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
+msgid "Mandrake Control Center"
+msgstr "陌dar蓹 M蓹rk蓹zi"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Bo艧 sah蓹ni istifad蓹 et"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Uzaq 脟ap Edici"
-
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "脟ap Edici"
+msgid "Remember this password"
+msgstr "Parolsuz"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Internet Connection Sharing is now enabled."
+msgstr "陌nternet Ba臒lant谋s谋 B枚l眉艧d眉r眉lm蓹si indi a莽谋ld谋"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Yerli 脟ap Edici"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Yerli 脟ap Edici"
+msgid "Use the free space on the Windows partition"
+msgstr "Windows b枚lm蓹sind蓹ki bo艧 sah蓹ni i艧l蓹t"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "脟ap Edici"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Bir 莽ap edici qurmaq ist蓹yirsiniz?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Add a scanner manually"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Yerli 脟ap Edici"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 s眉r眉c眉: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following scanner\n"
"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Qurmaq ist蓹diyiniz paketl蓹ri se莽in"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Papua New Guinea"
+msgstr "Papua Yeni Qvineya"
+
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
+msgid "Serbian (cyrillic)"
+msgstr "Az蓹rbaycanca (kiril)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "choose device"
-msgstr "A莽谋l谋艧 avadanl谋臒谋"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "脟ap edicini s谋namaq ist蓹yirsiniz?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Yerli 脟ap Edici"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "A莽谋l谋艧 disketi yarad谋l谋r"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Avtomatik t蓹sbit i艧l蓹t"
+msgid "Wait please, testing your connection..."
+msgstr "Ba臒lant谋n谋z s谋nan谋r..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
+msgid "Login ID"
+msgstr "Giri艧 ad谋"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "The %s is unsupported"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS TCP/IP 艧蓹b蓹k蓹l蓹rind蓹 fayl b枚l眉艧眉lm蓹si 眉莽眉n istifad蓹 edil蓹n m蓹艧hur bir \n"
+"protokoldur. Bu xidm蓹t NFS fayl q谋f谋l谋 istifad蓹sin蓹 imkan ver蓹r."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP Al谋c谋s谋"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr ""
+msgid "dismiss"
+msgstr "ke莽"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Qap谋"
+msgid "Printing/Scanning on \"%s\""
+msgstr "艦蓹b蓹k蓹 dayand谋r谋l谋r"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ", "
+msgid "omit raid modules"
+msgstr "raid modullar谋 ke莽"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd, lpr'nin d眉zg眉n olaraq i艧l蓹m蓹si 眉莽眉n laz谋mi 莽ap edici vasit蓹sidir.\n"
+"lpd 蓹sas蓹n, 莽ap v蓹zif蓹l蓹rini idar蓹 ed蓹n v蓹 onlar谋 莽ap ediciy蓹 g枚nd蓹r蓹n "
+"vericidir."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "%s tap谋ld谋"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "陌nternet Ba臒lant谋s谋 Qura艧d谋r谋lmas谋"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid " ("
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Ekran kart谋n谋z谋 se莽in"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Bir 莽ap edici qurmaq ist蓹yirsiniz?"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Siseminizd蓹 艧蓹b蓹k蓹 adapteri yoxdur!"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "%s qap谋s谋nda tap谋ld谋"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "艦蓹b蓹k蓹ni yenid蓹n ba艧latmaq ist蓹yirsiniz?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "I can't find any room for installing"
+msgstr "Art谋q b枚lm蓹 蓹lav蓹 edil蓹 bilm蓹z"
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Yerli 脟ap Edici"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Modify RAID"
+msgstr "RAIDi d蓹yi艧dir"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"ISDN PCI kart tapd谋m, amma n枚v眉n眉 bilmir蓹m. Xahi艧 edirik sonrak谋 ekrandak谋 "
+"kartlardan birini se莽in."
-#: ../../share/advertising/02-community.pl:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Add user"
+msgstr "陌stifad蓹莽ini 蓹lav蓹 et"
-#: ../../share/advertising/02-community.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-diskl蓹ri %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Liberia"
+msgstr "Liberiya"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Klaviaturan谋z谋 se莽in"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Format partitions"
+msgstr "B枚lm蓹 艧蓹kill蓹ndirilm蓹si"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Qurulum T蓹rzi Qura艧d谋r谋lmas谋"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "CUPS s眉r眉c眉 datas谋 oxunur..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "陌nternet qur臒ular谋"
+msgid "Scanner sharing to hosts: "
+msgstr "脟ap Edici"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Loopback fayl谋 ad谋: %s"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Modeminizin hans谋 serial qap谋ya ba臒l谋 oldu臒unu se莽iniz"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "A莽谋l谋艧da gecikm蓹 m眉dd蓹ti"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Xahi艧 edirik bir b枚lm蓹 眉st眉n蓹 t谋qlay谋n"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "陌stifad蓹莽i ad谋"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "X蓹tal谋 yed蓹kl蓹m蓹 fayl谋"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Configure"
+msgstr "Qur"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Ekran kart谋n谋z谋 se莽in"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Xahi艧 edirik komp眉terinizn ad谋n谋 girin.\n"
+"M蓹s蓹l蓹n``komp眉terad谋.sah蓹ad谋.com''.\n"
+"茝g蓹r 艧蓹b蓹k蓹 ke莽idi istifad蓹 edirsinizs蓹 bunun da IP n枚mr蓹sini girm蓹lisiniz."
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "脟ap Edici Ba臒lant谋s谋 Se莽in"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Yeni b枚lm蓹 yarat"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Yerli 脟ap Edici"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"B蓹zi paketl蓹r do臒ru olaraq qurulumu bitirm蓹di.\n"
+"cdrom s眉r眉c眉n眉z ya da cdromunuz d眉zg眉n i艧l蓹mir.\n"
+"茝vv蓹ld蓹n Linuks qurulu bir sistemd蓹 \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
+"istifad蓹 ed蓹r蓹k Cd-Rom'u yoxlay谋n.\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "%s tap谋ld谋"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "Az蓹rbaycan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "脟ap ediciniz n蓹 艧蓹kild蓹 ba臒l谋d谋r?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Usta"
-
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "Security level"
+msgstr "T蓹hl眉k蓹sizlik s蓹viyy蓹sinin qura艧d谋r谋lmas谋"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Rezolyusiya"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Usta"
+msgid "Services"
+msgstr "avadanl谋q"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -17532,10 +17569,6 @@ msgstr ""
"g枚st蓹ricil蓹ri, vs."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa 眉st眉"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Oyun stansiyas谋"
@@ -17606,10 +17639,6 @@ msgid ""
msgstr "KDE, 蓹sas qrafiki ara 眉z v蓹 yard谋m莽i proqramlar kolleksiyas谋"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara 脺z"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome i艧 stansiyas谋"
@@ -17629,10 +17658,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "T蓹cr眉bi"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C v蓹 C++ inki艧af kitabxanalar谋, proqramlar谋 v蓹 daxil edil蓹c蓹k fayllar"
@@ -17704,39 +17729,82 @@ msgstr "NFS vericisi, SMB vericisi, SSH vericisi, V蓹kil Verici"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimedya stansiyas谋"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Elektronik m蓹ktub v蓹 x蓹b蓹r oxuyucusu (pine, mutt, tin..) v蓹 Web s蓹yyahlar谋"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "陌nternet ba臒lant谋s谋 & qura艧d谋r谋lmas谋"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "S蓹s v蓹 video 莽al谋nmas谋/d眉z蓹li艧 proqramlar谋"
+#~ msgid "Configure the connection"
+#~ msgstr "艦蓹b蓹k蓹ni qur"
+
+#~ msgid "Disconnect"
+#~ msgstr "Ba臒lant谋n谋 k蓹s"
+
+#~ msgid "Connect"
+#~ msgstr "Ba臒lan"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ba臒lant谋n谋z谋 yenid蓹n qura艧d谋ra bil蓹rsiniz."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "陌st蓹s蓹niz 陌nternet蓹 ba臒lana bil蓹rsiniz ya da yeniden qura艧d谋ra bil蓹rsiniz."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "H蓹l蓹 陌nternet蓹 ba臒l谋 deyilsiniz."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Ba臒lant谋n谋z谋 k蓹s蓹 bil蓹rsiniz. Ya da ba臒lant谋n谋 yenid蓹n d蓹 qura艧d谋ra "
+#~ "bil蓹rsiniz."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Art谋q 陌nternet蓹 ba臒l谋s谋n谋z."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Oyun stansiyas谋"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "S蓹s v蓹 video 莽al谋nmas谋/d眉z蓹li艧 proqramlar谋"
+#~ msgid "Author:"
+#~ msgstr "Avtomatik yoxla"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Oyun stansiyas谋"
+#~ msgid "Audio station"
+#~ msgstr "Multimedya stansiyas谋"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Qrafika proqramlar谋, m蓹s蓹l蓹n The Gimp"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "S蓹s v蓹 video 莽al谋nmas谋/d眉z蓹li艧 proqramlar谋"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Elektronik m蓹ktub v蓹 x蓹b蓹r oxuyucusu (pine, mutt, tin..) v蓹 Web s蓹yyahlar谋"
+#~ msgid "Video station"
+#~ msgstr "Oyun stansiyas谋"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "S蓹s v蓹 video 莽al谋nmas谋/d眉z蓹li艧 proqramlar谋"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Oyun stansiyas谋"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Qrafika proqramlar谋, m蓹s蓹l蓹n The Gimp"
#, fuzzy
#~ msgid "Printer sharing"
@@ -17904,10 +17972,6 @@ msgstr ""
#~ "i艧l蓹m蓹y蓹 bil蓹r."
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "G眉nc蓹ll蓹m蓹"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Qur臒ular谋 s谋namaq ist蓹yirsiniz?"
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
index d02b5504f..3fceb1332 100644
--- a/perl-install/share/po/be.po
+++ b/perl-install/share/po/be.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
"Language-Team: be\n"
@@ -13,933 +13,1474 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
msgstr ""
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "袗写屑械薪邪"
-
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Launch userdrake"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "小械褌泻邪胁褘 锌褉褘薪褌褝褉 (TCP/Socket)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"孝邪斜谢i褑邪 褉邪蟹屑褟褕褔褝薪薪褟 褉褝蟹械褉胁芯胁邪谐邪 写褘褋泻褍 屑邪械 i薪褕褘 锌邪屑械褉\n"
+"袩褉邪褑褟谐胁邪褑褜 写邪谢械泄?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Which username"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Custom"
-msgstr "袩邪 胁褘斜邪褉褍"
+msgid "Which type of entry do you want to add?"
+msgstr "携泻i 褌褘锌 锌褍薪泻褌邪 卸邪写邪械褑械 写邪写邪褑褜?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "Restore partition table"
+msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "No sharing"
-msgstr "效邪泻邪械褑褑邪"
+msgid "On CUPS server \"%s\""
+msgstr "IP 褋械褉胁械褉邪 SMB"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "More"
-msgstr "袩械褉邪薪芯褋"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Here is the full list of available countries"
+msgid "Use ``%s'' instead"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪泄褑械 ``%s'' 蟹邪屑械褋褌"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "孝褘锌"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "袩褉褘谢邪写邪-褕谢褞蟹"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Country"
-msgstr "袦邪薪褑i褉邪胁邪薪薪械"
+msgid "Ethernetcard"
+msgstr "褑i泻邪胁邪"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Parameters"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "袙褘斜邪褉 屑芯胁褘"
+msgid "Auto-detect"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Use Unicode by default"
+msgid "Interface:"
msgstr ""
-#: ../../any.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "袣谢邪褋 褍褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr ""
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"\n"
+"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "袙褘 屑芯卸邪褑械 邪斜褉邪褑褜 褨薪褕褘褟 屑芯胁褘, 褟泻i褟 斜褍写褍褑褜 写邪褋褌褍锌薪褘 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
+msgid "Belarus"
+msgstr "袘械谢邪褉褍褋泻褨"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "袗斜褟褉褘褑械 屑褝薪褝写卸邪褉 胁芯泻薪邪褳:"
+msgid "Error writing to file %s"
+msgstr "袩邪屑褘谢泻邪 蟹邪锌i褋褍 褳 褎邪泄谢 %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "袗斜褟褉褘褑械 邪褋薪芯褳薪邪谐邪 泻邪褉褘褋褌邪谢褜薪i泻邪:"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"ampd 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 写谢褟 邪写褋谢械卸胁邪薪薪褟 褋褌邪褌褍褋褍 斜邪褌邪褉褝i i 胁褟写蟹械薪薪褟 "
+"褋褌邪褌褘褋褌褘泻i.\n"
+"携谐芯 屑芯卸薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 胁褘泻谢褞褔褝薪薪褟 屑邪褕褘薪褘 锌褉褘 薪i蟹泻i屑 蟹邪褉邪写蟹械 斜邪褌邪褉褝i."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 aboot?"
+msgid "Use tape to backup"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be installed"
+msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 写邪写邪薪褘 写邪 褋i褋褌褝屑褘"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"袦芯卸薪邪 薪邪褋褌褉芯i褑褜 褋i褋褌褝屑褍 写谢褟 邪褳褌邪屑邪褌褘褔薪邪谐邪 褳胁邪褏芯写褍 褳 褋i褋褌褝屑褍 写谢褟\n"
-"邪写薪邪谐芯 泻邪褉褘褋褌邪谢褜薪i泻邪. 袣邪谢i 袙褘 薪械 卸邪写邪械褑械 谐褝褌邪谐邪, 薪邪褑i褋薪i褑械 \"袗写屑械薪邪\"."
+msgid "CUPS configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "袗褳褌邪屑邪褌褘褔薪褘 褳胁邪褏芯写 褍 褋i褋褌褝屑褍"
+msgid "Hong Kong"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Icon"
-msgstr "袩i泻褌邪谐褉邪屑邪"
+msgid "Not enough free space to allocate new partitions"
+msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Shell"
-msgstr "袗斜邪谢芯薪泻邪:"
+msgid "Moving"
+msgstr "袩械褉邪薪芯褋褨屑"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Password (again)"
-msgstr "袩邪褳褌邪褉褘褑械 锌邪褉芯谢褜"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Password"
-msgstr "袩邪褉芯谢褜"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "User name"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "校谢邪褋薪邪械 i屑褟"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Accept user"
-msgstr "袩褉褘薪褟褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "Lebanon"
+msgstr ""
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Done"
-msgstr "袟褉芯斜谢械薪邪"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "小械泻褌邪褉"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "袗斜褟褉褘褑械 褎邪泄谢"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "袗褉屑褟薪褋泻i (褎邪薪械褌褘褔薪褘)"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "The DHCP start ip"
msgstr ""
-"校胁褟写蟹i褑械 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍\n"
-"%s"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Add user"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "256 kB"
+msgstr "256 袣斜"
#: ../../any.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "袚褝褌邪 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 褳卸芯 写邪写邪写蟹械薪邪"
+msgid "Bootloader main options"
+msgstr "袚邪谢芯褳薪褘褟 芯锌褑褘i 锌邪褔邪褌泻芯胁邪谐邪 蟹邪谐褉褍蟹褔褘泻褍"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "袚褝褌邪 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 褳卸芯 写邪写邪写蟹械薪邪"
+msgid "Tape"
+msgstr "孝褘锌: "
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-"I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 锌邪胁i薪薪邪 蟹屑褟褕褔邪褑褜 谢i褌邪褉褘 褌芯谢褜泻i 薪邪 薪i卸薪i屑 褉褝谐i褋褌褉褘, \n"
-"谢i褔斜褘, `-' i `_'"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "袣邪谢i 谢邪褋泻邪, 褍胁褟写蟹i褑械 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍"
+msgid "Malaysia"
+msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "袚褝褌褘 锌邪褉芯谢褜 蟹邪薪邪写褌邪 锌褉芯褋褌褘"
+msgid "Swiss (French layout)"
+msgstr "楔胁械泄褑邪褉褋泻i (肖褉邪薪褑褍蟹褋泻邪褟 褉邪褋泻谢邪写泻邪)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Please try again"
-msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid 薪械 锌褉邪褑邪蟹写芯谢褜薪褘 (屑芯卸邪 raid 锌褉褘谢邪写褘 邪写褋褍褌薪i褔邪褞褑褜?)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "袩邪褉芯谢i 薪械 褋褍锌邪写邪褞褑褜"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(already added %s)"
-msgstr "(褍卸芯 写邪写邪写蟹械薪邪 %s)"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "小褌邪薪写邪褉褌薪褘"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "access to compilation tools"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to network tools"
+msgid "Level %s\n"
+msgstr "校蟹褉芯胁械薪褜 %s\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Luxembourg"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to administrative files"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "I褉邪薪褋泻i"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "allow \"su\""
+msgid "Bus"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to rpm tools"
+msgid "Iraq"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "袩邪褌褝薪褑褘泄薪褘 邪写褉邪褋 袥袙小 泻邪薪褎谢i泻褌褍械 蟹 斜褟谐褍褔邪泄 泻邪薪褎i谐褍褉邪褑褘褟泄 %s!\n"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configuring..."
+msgstr "袧邪褋褌褉芯泄泻邪 IDE"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"校 屑械薪褞 屑邪褞褑褑邪 薪邪褋褌褍锌薪褘褟 锌褍薪泻褌褘.\n"
-"袙褘 屑芯卸邪褑械 写邪写邪褑褜 褟褕褔褝, 邪谢褜斜芯 蟹屑褟薪i褑褜 i褋薪褍褞褔褘褟."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "I薪褕邪褟 袗小 (windows...)"
+msgid "Password (again)"
+msgstr "袩邪褳褌邪褉褘褑械 锌邪褉芯谢褜"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "I薪褕邪褟 袗小 (MacOS,...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "I薪褕邪褟 袗小 (SunOS,...)"
+msgid "Venezuela"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP 邪写褉邪褋"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "携泻i 褌褘锌 锌褍薪泻褌邪 卸邪写邪械褑械 写邪写邪褑褜?"
+msgid "Choose the sizes"
+msgstr "袙褘斜邪褉 锌邪屑械褉邪褳"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "袚褝褌邪褟 屑械褌泻邪 褳卸芯 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "袙褘 锌邪胁i薪薪褘 屑械褑褜 褉邪蟹写蟹械谢 swap"
+msgid "Choose another partition"
+msgstr "小褌胁邪褉褝薪薪械 薪芯胁邪谐邪 褉邪蟹写蟹械谢褍"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "袩褉褘薪褟褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "Left \"Windows\" key"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "袩褍褋褌邪褟 屑械褌泻邪 薪械 写邪蟹胁邪谢褟械褑褑邪"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "袩邪 写邪屑邪褳谢械薪薪褞"
+msgid "Guyana"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "NoVideo"
+msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Initrd-size"
-msgstr "Initrd"
+msgid "Remove a module"
+msgstr "袗写胁邪褉芯褌薪褘 锌邪褉邪写邪泻 褋褌邪褉芯薪邪泻"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Append"
-msgstr "袛邪谢褍褔褘褑褜"
+msgid "Password"
+msgstr "袩邪褉芯谢褜"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Label"
-msgstr "袦械褌泻邪"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "袧械薪邪写蟹械泄薪邪"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Table"
-msgstr "孝邪斜谢i褑邪"
+msgid "Scanning on your HP multi-function device"
+msgstr ""
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "效褘褌邪薪薪械-蟹邪锌i褋"
+msgid "Choose an existing RAID to add to"
+msgstr "袗斜褟褉褘褑械 i褋薪褍褞褔褘 RAID 写谢褟 写邪写邪薪薪褟"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "孝褍褉褝褑泻i (褋褍褔邪褋薪邪褟 \"Q\" 屑邪写褝谢褜)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "袙i写褝邪-褉褝卸褘屑"
+msgid "Lilo message not found"
+msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "袙芯斜褉邪蟹"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Default OS?"
-msgstr "袩邪 写邪屑邪褳谢械薪薪褞"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
+msgid "if needed"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable CD Boot?"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Open Firmware Delay"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Boot device"
-msgstr "袟邪谐褉褍蟹邪褔薪邪褟 锌褉褘谢邪写邪"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Init Message"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
+"\n"
+"袣邪谢i 胁褘 屑邪械褑械 ISA 泻邪褉褌褍, 胁械谢i褔褘薪i 薪邪 薪邪褋褌褍锌薪褘屑 褝泻褉邪薪械 锌邪胁i薪薪褘 斜褘褑褜 "
+"褋邪锌褉邪褳写薪褘屑i.\n"
+"\n"
+"袣邪谢i 胁褘 屑邪械褑械 PCMCIA 泻邪褉褌褍, 胁褘 锌邪胁i薪薪褘 胁械写邪褑褜 irq i io 胁邪褕邪泄 泻邪褉褌褘.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Bootloader to use"
-msgstr "袚邪谢芯褳薪褘褟 芯锌褑褘i 锌邪褔邪褌泻芯胁邪谐邪 蟹邪谐褉褍蟹褔褘泻褍"
+msgid "Do not print any test page"
+msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "袚邪谢芯褳薪褘褟 芯锌褑褘i 锌邪褔邪褌泻芯胁邪谐邪 蟹邪谐褉褍蟹褔褘泻褍"
+msgid "Gurmukhi"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+msgid "Force No APIC"
msgstr ""
-"袨锌褑褘褟 ``袗斜屑械卸邪胁邪薪薪械 芯锌褑褘褟褳 泻邪屑邪薪写薪邪谐邪 褉邪写泻褍'' 薪械 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 斜械蟹 锌邪褉芯谢褟"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "袩邪蟹薪邪褔褑械 锌邪屑械褉 RAM 褍 M斜"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"袚褝褌褘 锌邪褉芯谢褜 蟹邪薪邪写褌邪 锌褉芯褋褌褘 (褟谐芯 写邪褳卸褘薪褟 锌邪胁i薪薪邪 斜褘褑褜 薪械 屑械薪械泄 蟹邪 %d 谢i褌邪褉邪褳)"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "袛邪褋褌褍锌薪邪 褕屑邪褌 锌褉芯褎i谢褟褳"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "袣谢邪胁i褟褌褍褉邪"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "袩邪蟹薪邪褔褑械 写邪泻谢邪写薪褘 锌邪屑械褉 RAM (蟹薪芯泄写蟹械薪邪 %d M斜)"
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "袗褔褘褕褔邪褑褜 /tmp 锌褉褘 泻芯卸薪邪泄 蟹邪谐褉褍蟹褑褘"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "小褌胁邪褉褘褑褜 蟹邪谐褉. 写褘褋泻"
+msgid "Show only for the selected day"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "restrict"
-msgstr "邪斜屑械卸邪胁邪薪薪械"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "袗斜屑械卸邪胁邪薪薪械 芯锌褑褘褟褳 泻邪屑邪薪写薪邪谐邪 褉邪写泻邪"
+msgid "512 kB"
+msgstr "512 袣斜"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Force No APIC"
+msgid "Logs"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enable ACPI"
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "袟邪褌褉褘屑泻邪 锌械褉邪写 蟹邪谐褉褍蟹泻邪泄 胁芯斜褉邪蟹褍 锌邪 写邪屑邪褳谢械薪薪褞"
+msgid "<control>N"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "compact"
-msgstr "泻邪屑锌邪泻褌薪邪"
+msgid "What kind of card do you have?"
+msgstr "携泻i 褌褘锌 泻邪褉褌褘 胁褘 屑邪械褑械?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "袣邪屑锌邪泻褌薪邪"
+msgid "<control>O"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "校褋褌邪谢褟胁邪薪薪械 蟹邪谐褉褍蟹褔褘泻褍"
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Security"
+msgstr "泻褍褔邪褉邪胁褘"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "袩械褉褕褘 褋械泻褌邪褉 蟹邪谐褉褍蟹邪褔薪邪谐邪 褉邪蟹写蟹械谢褍"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "袩械褉褕褘 褋械泻褌邪褉 锌褉褘谢邪写褘 (MBR)"
+msgid "<control>Q"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 褳褋褌邪谢褟胁邪褑褜 锌邪褔邪褌泻芯胁褘 蟹邪谐褉褍蟹褔褘泻?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "袗谐褍谢褜薪褘"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "校褋褌邪谢褟胁邪薪薪械 LILO/GRUB"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "校褋褌邪谢褟胁邪薪薪械 SILO"
+msgid "Network Configuration"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "袩褉邪锌褍褋褑i褑褜"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
+msgid "<control>S"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "袩械褉褕褘 褋械泻褌邪褉 蟹邪谐褉褍蟹邪褔薪邪谐邪 褉邪蟹写蟹械谢褍"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"袩邪写泻谢褞褔褝薪薪械 \n"
+" 薪械 锌褉邪蟹 D-泻邪薪邪谢 (胁褘谢褍褔邪薪褘褟 泻邪薪邪谢褘)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "小褌胁邪褉褝薪薪械 蟹邪谐褉褍蟹邪褔薪邪泄 写褘褋泻械褌褘"
+msgid "Option %s must be a number!"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+msgid "Notice"
+msgstr "谐邪谢褜褕褌褍泻"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "袗斜褟褉褘褑械 写褘褋泻邪胁芯写, 褍 褟泻i屑 斜褍写蟹械 褋褌胁邪褉邪褑褑邪 蟹邪谐褉褍蟹邪褔薪邪褟 写褘褋泻械褌邪"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "袛褉褍谐i 写褘褋泻邪胁芯写"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "袩械褉褕褘 写褘褋泻邪胁芯写"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "袙褘斜邪褔邪泄褑械, 邪谢械 写褘褋泻邪胁芯写 薪械写邪褋褌褍锌薪褘"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "What type of partitioning?"
+msgstr "携泻i 褌褘锌 写褉褍泻邪褉泻i 胁褘 屑邪械褑械?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"袟 写邪锌邪屑芯谐邪泄 蟹邪谐褉褍蟹邪褔薪邪谐邪 写褘褋泻褍 胁褘 蟹屑芯卸邪褑械 蟹邪谐褉褍卸邪褑褜 Linux 褌邪泻褋邪屑邪 褟泻 i \n"
-"褋褌邪薪写邪褉褌薪褘屑 蟹邪谐褉褍蟹褔褘泻邪屑. 袚褝褌邪 屑芯卸邪 斜褘褑褜 褟泻邪褋薪邪, 泻邪谢i 胁褘 薪械 卸邪写邪械褑械 \n"
-"褳褋褌邪谢褢褳胁邪褑褜 LILO (褑i Grub), 泻邪谢i i薪褕邪褟 邪锌械褉邪褑褘泄薪邪褟 褋i褋褌褝屑邪 胁褘写邪谢褟械 LILO,\n"
-"褑i LILO 薪械 屑芯卸邪 锌褉邪褑邪胁邪褑褜 褍 胁邪褕邪泄 泻邪薪褎i谐褍褉邪褑褘i. 袟邪谐褉褍蟹邪褔薪褘 写褘褋泻 褌邪泻褋邪屑邪 "
-"屑芯卸邪\n"
-"斜褘褑褜 胁褘泻邪褉褘褋褌邪薪褘 褋褍屑械褋薪邪 蟹 褉邪屑芯薪褌薪邪泄 写褘褋泻械褌邪泄 Mandrake Linux, 褟泻邪褟 胁械谢褜屑i \n"
-"锌邪谢械谐褔褘褑褜 胁褘褉邪褌邪胁邪薪薪械 褋i褋褌褝屑褘 锌邪褋谢褟 蟹斜芯褞.\n"
-"\n"
-"袞邪写邪械褑械 褋褌胁邪褉褘褑褜 蟹邪谐褉褍蟹邪褔薪褘 写褘褋泻 蟹邪褉邪蟹?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface"
+msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"袟 写邪锌邪屑芯谐邪泄 蟹邪谐褉褍蟹邪褔薪邪谐邪 写褘褋泻邪 胁褘 蟹屑芯卸邪褑械 蟹邪谐褉褍卸邪褑褜 Linux 薪械蟹邪谢械卸薪邪 邪写\n"
-" 褋褌邪薪写邪褉褌薪邪谐邪 蟹邪谐褉褍蟹褔褘泻邪. 袚褝褌邪 屑芯卸邪 斜褘褑褜 褟泻邪褋薪邪, 泻邪谢i 胁褘 薪械 卸邪写邪械褑械 \n"
-"褳褋褌邪谢褢褳胁邪褑褜 SILO, 泻邪谢i i薪褕邪褟 邪锌械褉邪褑褘泄薪邪褟 褋i褋褌褝屑邪 胁褘写邪谢褟械 SILO, 褑i SILO 薪械 \n"
-"屑芯卸邪 锌褉邪褑邪胁邪褑褜 褍 胁邪褕邪泄 泻邪薪褎i谐褍褉邪褑褘i. 袟邪谐褉褍蟹邪褔薪褘 写褘褋泻 褌邪泻褋邪屑邪 屑芯卸邪 斜褘褑褜 \n"
-"胁褘泻邪褉褘褋褌邪薪 褋褍屑械褋薪邪 蟹 胁褘褉邪褌邪胁邪谢褜薪邪泄 写褘褋泻械褌邪泄 Mandrake Linux, 褟泻邪褟 胁械谢褜屑i \n"
-"锌邪谢械谐褔褘褑褜 胁褘褉邪褌邪胁邪薪薪械 褋i褋褌褝屑褘 锌邪褋谢褟 蟹斜芯褞.\n"
-"\n"
-"袣邪谢i 卸邪写邪械褑械 褋褌胁邪褉褘褑褜 蟹邪谐褉褍蟹邪褔薪褘 写褘褋泻 蟹邪褉邪蟹, 褍褋褌邪褳褑械 写褘褋泻械褌褍 褳 锌械褉褕褘\n"
-"写褘褋泻邪胁芯写 i 薪邪褑i褋薪i褑械 \"Ok\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 褳褋褌邪谢褟胁邪褑褜 锌邪褔邪褌泻芯胁褘 蟹邪谐褉褍蟹褔褘泻?"
+msgid "comma separated strings"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢邪褳"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "袧械 褏邪锌邪械 写褘褋泻邪胁邪泄 锌褉邪褋褌芯褉褘 褳 /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "袩褉邪胁械褉泻邪 锌邪褉褌芯褳"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "褋械褉胁械褉"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "袩芯褉褌 屑褘褕褘"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "褎邪褉屑邪褌邪胁邪薪薪械"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "笑i 褢褋褑褜 褍 胁邪褋 %s i薪褌褝褉褎械泄褋?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
+msgid "Switzerland"
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
+msgid "Brunei Darussalam"
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "袨锌褑褘i 邪写写邪谢械薪邪谐邪 锌褉褘薪褌褝褉褍 lpd"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "袙褘 屑芯卸邪褑械 邪斜褉邪褑褜 褨薪褕褘褟 屑芯胁褘, 褟泻i褟 斜褍写褍褑褜 写邪褋褌褍锌薪褘 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Configure Internet Access..."
+msgstr "袧邪褋褌褉芯泄泻邪 褋谢褍卸斜邪褳"
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "袛邪写邪褑褜 褉邪蟹写蟹械谢 薪械屑邪谐褔褘屑邪"
+msgid "Norway"
+msgstr "袧邪褉胁械卸褋泻i"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d 褋械泻褍薪写邪褳"
+msgid "Danish"
+msgstr "袛邪褑泻i"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 褏胁i谢i薪邪"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d 褏胁i谢i薪"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"袣邪谢i 谢邪褋泻邪, 褍胁褟写蟹i褑械 IP 泻邪薪褎i谐褍褉邪褑褘褞 写谢褟 胁邪褕邪泄 屑邪褕褘薪褘.\n"
+"袣芯卸薪褘 锌褍薪泻褌 锌邪胁i薪械薪 斜褘褑褜 蟹邪锌芯褳薪械薪褘 褟泻 IP 邪写褉邪褋 褳 写蟹械褋褟褌泻芯胁邪-泻褉芯锌泻邪胁邪泄 \n"
+"薪邪褌邪褑褘i (薪邪锌褉褘泻谢邪写, 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "TB"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "GB"
+msgid "Processors"
msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "袦邪写褜褟褉褋泻i"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "袦斜"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
+msgid "partition %s is now known as %s"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Austria"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+msgid "Backup Other files..."
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "I褌邪谢褜褟薪褋泻i"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "SMB server IP"
+msgstr "IP 褋械褉胁械褉邪 SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
+msgid "Congo (Kinshasa)"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "袚谢."
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "袧邪褉胁械卸褋泻i"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "孝邪斜谢i褑邪 褉邪蟹屑褟褕褔褝薪薪褟 锌褉褘谢邪写褘 %s 斜褍写蟹械 蟹邪锌i褋邪薪邪 薪邪 写褘褋泻!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Greece"
-msgstr "袚褉褝褔邪褋泻i"
+msgid "Installing HPOJ package..."
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Germany"
-msgstr "袧褟屑械褑泻i"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"袟 写邪锌邪屑芯谐邪泄 蟹邪谐褉褍蟹邪褔薪邪谐邪 写褘褋泻褍 胁褘 蟹屑芯卸邪褑械 蟹邪谐褉褍卸邪褑褜 Linux 褌邪泻褋邪屑邪 褟泻 i \n"
+"褋褌邪薪写邪褉褌薪褘屑 蟹邪谐褉褍蟹褔褘泻邪屑. 袚褝褌邪 屑芯卸邪 斜褘褑褜 褟泻邪褋薪邪, 泻邪谢i 胁褘 薪械 卸邪写邪械褑械 \n"
+"褳褋褌邪谢褢褳胁邪褑褜 LILO (褑i Grub), 泻邪谢i i薪褕邪褟 邪锌械褉邪褑褘泄薪邪褟 褋i褋褌褝屑邪 胁褘写邪谢褟械 LILO,\n"
+"褑i LILO 薪械 屑芯卸邪 锌褉邪褑邪胁邪褑褜 褍 胁邪褕邪泄 泻邪薪褎i谐褍褉邪褑褘i. 袟邪谐褉褍蟹邪褔薪褘 写褘褋泻 褌邪泻褋邪屑邪 "
+"屑芯卸邪\n"
+"斜褘褑褜 胁褘泻邪褉褘褋褌邪薪褘 褋褍屑械褋薪邪 蟹 褉邪屑芯薪褌薪邪泄 写褘褋泻械褌邪泄 Mandrake Linux, 褟泻邪褟 胁械谢褜屑i \n"
+"锌邪谢械谐褔褘褑褜 胁褘褉邪褌邪胁邪薪薪械 褋i褋褌褝屑褘 锌邪褋谢褟 蟹斜芯褞.\n"
+"\n"
+"袞邪写邪械褑械 褋褌胁邪褉褘褑褜 蟹邪谐褉褍蟹邪褔薪褘 写褘褋泻 蟹邪褉邪蟹?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Czech Republic"
+msgid ", USB printer \\#%s"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Belgium"
-msgstr "袘械谢褜谐i泄褋泻i"
+msgid "Latvian"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France"
-msgstr "肖褉邪薪褑褘褟"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Module name"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "小褌胁邪褉褘褑褜 蟹邪谐褉. 写褘褋泻"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Costa Rica"
+msgid "Use Incremental Backups"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "袩邪屑褘谢泻邪 邪写泻褉褘褑褑褟 %s 写谢褟 蟹邪锌i褋褍: %s"
+msgid "First sector of drive (MBR)"
+msgstr "袩械褉褕褘 褋械泻褌邪褉 锌褉褘谢邪写褘 (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
+msgid "Joystick"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
+#: ../../lang.pm:1
+#, c-format
+msgid "El Salvador"
+msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
msgstr ""
-"袙邪屑 薪械邪斜褏芯写薪邪 蟹邪写邪褑褜 锌褉邪胁i谢褜薪褘 褌褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (ext2, reiserfs)\n"
-"写谢褟 谐褝褌邪泄 泻褉芯锌泻i 屑邪薪褑i褉邪胁邪薪薪褟\n"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-"袙邪屑 薪械邪斜褏芯写薪邪 蟹邪写邪褑褜 锌褉邪胁i谢褜薪褘 褌褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (ext2, reiserfs)\n"
-"写谢褟 谐褝褌邪泄 泻褉芯锌泻i 屑邪薪褑i褉邪胁邪薪薪褟\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "袚褝褌褘 泻邪褌邪谢芯谐 锌邪胁褨薪械薪 蟹薪邪褏芯写蟹褨褑褑邪 褳薪褍褌褉褘 泻邪褉邪薪褢胁邪泄 褎邪泄谢邪胁邪泄 褋褨褋褌褝屑褘"
+msgid "Trying to rescue partition table"
+msgstr "袩邪褋锌褉邪斜褍械屑 胁褘褉邪褌邪胁邪褑褜 褌邪斜谢i褑褍 褉邪蟹写蟹械谢邪褳"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
+msgid "Option %s must be an integer number!"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../interactive/stdio.pm:1
+#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"袙褘 邪斜褉邪谢i RAID 褉邪蟹写蟹械谢 褟泻 泻邪褉邪薪褢胁褘.\n"
-"袧褟屑邪 蟹邪谐褉褍蟹褔褘泻褍, 褟泻i 斜 蟹邪谐褉褍蟹i褳褋褟 斜械蟹 /boot 褉邪蟹写蟹械谢邪.\n"
-"袛邪写邪泄褑械 褉邪蟹写械谢 /boot, 泻邪谢i 谢邪褋泻邪."
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "校卸芯 褢褋褑褜 褉邪蟹写蟹械谢 蟹 锌褍薪泻褌邪屑 屑邪薪褑i褉邪胁邪薪薪褟 %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "袧械屑邪谐褔褘屑邪 蟹邪锌褍褋褑褨褑褜 live upgrade !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
+msgid "Name: "
+msgstr "I屑褟: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "袩褍薪泻褌 屑邪薪褑i褉邪胁邪薪薪褟 锌邪胁i薪械薪 锌邪褔褘薪邪褑褑邪 蟹 /"
+msgid "16 million colors (24 bits)"
+msgstr "16 屑i谢褜褢薪邪褳 泻芯谢械褉邪褳 (24 斜i褌褘)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Allow all users"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "袙褘 薪械 屑芯卸邪褑械 褉邪蟹斜i胁邪褑褜 薪邪 褉邪蟹写械谢褘, 锌邪屑械褉 褟泻i褏 屑械薪械泄 蟹邪 32 袦斜"
+msgid "The official MandrakeSoft Store"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "袟屑褟薪械薪薪械 锌邪屑械褉邪褳"
+
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "袙褘 薪械 屑芯卸邪褑械 褉邪蟹斜i胁邪褑褜 薪邪 褉邪蟹写械谢褘, 锌邪屑械褉 褟泻i褏 屑械薪械泄 蟹邪 16 袦斜"
+msgid "Cable connection"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
#: ../../fsedit.pm:1
#, fuzzy, c-format
@@ -959,816 +1500,238 @@ msgstr ""
"\n"
"笑i 卸邪写邪械褑械 褋褌褉邪褑i褑褜 褍褋械 褉邪蟹写蟹械谢褘?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "袩邪屑褘谢泻邪"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "褋械褉胁械褉"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "I屑褟 锌褉褘薪褌褝褉褍"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "I屑褟: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "with /usr"
-msgstr ""
+msgid "mkraid failed"
+msgstr "mkraid 薪械 锌褉邪褑邪蟹写芯谢褜薪褘"
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "simple"
+msgid "Button 3 Emulation"
msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢褍 %s"
+msgid "Sending files..."
+msgstr "袟邪褏邪胁邪薪薪械 褳 褎邪泄谢"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "锌邪屑褘谢泻邪 褉邪蟹屑邪薪褑i褉邪胁邪薪薪褟 %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "I褳褉褘褌 (褎邪薪械褌褘褔薪褘)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "access to rpm tools"
msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢褍 %s"
+msgid "edit"
+msgstr "小褟褉褝写薪i"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢褍 %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "URI 锌褉褘薪褌褝褉褍"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "小褌胁邪褉褝薪薪械 i 褎邪褉屑邪褌邪胁邪薪薪械 褎邪泄谢邪 %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "袧械 胁械写邪褞 褟泻 邪写褎邪褉屑邪褌邪胁邪褑褜 %s 蟹 褌褘锌邪屑 %s"
+msgid "Phone number"
+msgstr "袧褍屑邪褉 褌褝谢械褎芯薪褍"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s 锌邪屑褘谢泻邪 褎邪褉屑邪褌邪胁邪薪薪褟 %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+msgid "Printer name, description, location"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
msgstr ""
-"袧邪褑褨褋薪褨褑械 \"孝邪泻\", 泻邪谢褨 卸邪写邪械褑械 胁褘写邪谢褨褑褜 褍褋械 写邪写蟹械薪褘褟\n"
-"褨 褉邪蟹写蟹械谢褘 薪邪 谐褝褌褘屑 写褘褋泻褍. 袘褍写蟹褑械 褍胁邪卸谢褨胁褘褟, 锌邪褋谢褟 谐褝褌邪泄 邪锌械褉邪褑褘褨 胁褘 薪械\n"
-"\n"
-"蟹写芯谢械械褑械 邪写薪邪胁褨褑褜 谢褞斜褘褟 写邪写蟹械薪褘褟 褨 褉邪蟹写蟹械谢褘, 褍谢褨褔胁邪褞褔褘 褨 写邪写蟹械薪褘褟 Windows\n"
-"\n"
-"\n"
-"袧邪褑褨褋薪褨褑械 \"袗写屑械薪邪\" 泻邪斜 邪写屑褟薪褨褑褜 邪锌械褉邪褑褘褞 斜械蟹 褋褌褉邪褌褘 写邪写蟹械薪褘褏 褨 褉邪蟹写蟹械谢邪褳"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"袗斜褟褉褘褑械 卸芯褉褋泻褨 写褘褋泻 褟泻褨 卸邪写邪械褑械 邪褔褘褋褑褨褑褜 写谢褟 褳褋褌邪谢褟胁邪薪薪褟\n"
-"薪芯胁邪谐邪 褉邪蟹写蟹械谢褍 Mandrake Linux. 袘褍写蟹褑械 褳胁邪卸谢褨胁褘褟, 褍褋械 写邪写蟹械薪褘褟 薪邪 写褘褋泻褍 "
-"斜褍写褍褑褜\n"
-" 蟹薪褨褕褔邪薪褘 褨 褨褏 薪械屑邪谐褔褘屑邪 斜褍写蟹械 邪写薪邪胁褨褑褜."
+"Please choose the\n"
+"media for backup."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "Use Xinerama extension"
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "袙i褉褌褍邪谢褜薪邪褟 褎邪泄谢邪胁邪褟 褋i褋褌褝屑邪 (loopback)"
+
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "袝褳褉芯锌邪"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "袙褘蟹薪邪褔褝薪薪械 卸芯褉褋褌泻邪谐邪 写褘褋泻褍"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgid "Copying %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "袗斜褟褉褘褑械 屑邪薪i褌芯褉"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+msgid "Dominican Republic"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Swaziland"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Set-UID"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (邪写 LInux LOader) i Grub - 谐褝褌邪 蟹邪谐褉褍蟹褔褘泻i. 携薪褘 屑芯谐褍褑褜 蟹邪谐褉褍蟹i褑褜 "
-"写褉褍谐褍褞\n"
-"GNU/Linux 褑i 谢褞斜褍褞 i薪褕褍褞 邪锌械褉邪褑褘泄薪褍褞 褋i褋褌褝屑褍, 褍褋褌邪谢褟胁邪薪褍褞 薪邪 泻邪屑锌褍褌邪褉褘.\n"
-"袟胁褘褔邪泄薪邪, 谐褝褌褘褟 i薪褕褘褟 邪锌械褉邪褑褘泄薪褘褟 褋i褋褌褝屑褘 泻邪褉褝泻褌薪邪 胁褘蟹薪邪褔邪褞褑褑邪 i\n"
-"褳褋褌邪谢褢褳胁邪褞褑褑邪. 袣邪谢i 谐褝褌邪 薪械 邪褌褉褘屑邪谢邪褋褟, 褌芯 胁褘 屑芯卸邪褑械 写邪写邪褑褜 谢褞斜褘 蟹邪锌i褋\n"
-"褋邪屑邪褋褌芯泄薪邪. 袘褍写蟹褜褑械 褳锌褝褳薪械薪褘, 褕褌芯 胁褘 蟹邪写邪谢i 泻邪褉褝泻褌薪褘褟 锌邪褉邪屑械褌褉褘.\n"
-"\n"
-"\n"
-"孝邪泻褋邪屑邪 胁褘 屑芯卸邪褑械 锌邪卸邪写邪褑褜 i 薪械 写邪斜邪褳谢褟褑褜 i薪褕褘褟 邪锌械褉邪褑褘泄薪褘褟 褋i褋褌褝屑褘.\n"
-"校 褌邪泻i屑 胁褘锌邪写泻褍 锌邪褌褉褝斜薪邪 胁褘写邪谢i褑褜 邪写锌邪胁械写薪褘褟 蟹邪锌i褋褘. 袗谢械 卸 褌邪写褘 胁邪屑 \n"
-"锌邪褌褉褝斜薪邪 斜褍写蟹械 蟹邪谐褉褍蟹邪褔薪邪褟 写褘褋泻械褌邪, 泻邪斜 蟹邪谐褉褍蟹i褑褑邪!"
+msgid "Please check if you are using CDRW media"
+msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
+"袗斜褟褉褘褑械 卸芯褉褋泻褨 写褘褋泻 褟泻褨 卸邪写邪械褑械 邪褔褘褋褑褨褑褜 写谢褟 褳褋褌邪谢褟胁邪薪薪褟\n"
+"薪芯胁邪谐邪 褉邪蟹写蟹械谢褍 Mandrake Linux. 袘褍写蟹褑械 褳胁邪卸谢褨胁褘褟, 褍褋械 写邪写蟹械薪褘褟 薪邪 写褘褋泻褍 "
+"斜褍写褍褑褜\n"
+" 蟹薪褨褕褔邪薪褘 褨 褨褏 薪械屑邪谐褔褘屑邪 斜褍写蟹械 邪写薪邪胁褨褑褜."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "袟胁褘褔邪泄薪邪褟 屑褘褕 蟹 2 泻薪芯锌泻邪屑褨"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid "Remove the logical volumes first\n"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+msgid "Internet access"
msgstr ""
-"袧邪 胁邪褕褘屑 写褘褋泻褍 斜褘谢芯 蟹薪芯泄写蟹械薪邪 斜芯谢械泄 蟹邪 邪写蟹褨薪 褉邪蟹写蟹械谢\n"
-"Windows. 袣邪谢褨 谢邪褋泻邪, 邪斜褟褉褘褑械 褌芯泄, 锌邪屑械褉 褟泻芯谐邪 卸邪写邪械褑械 蟹屑褟薪褨褑褜, "
-"泻邪斜褍褋褌邪谢褟胁邪褑褜\n"
-"褋褨褋褌褝屑褍 Mandrake Linux.\n"
-"\n"
-"\n"
-"袛谢褟 i褎邪褉屑邪褑褘褨, 泻芯卸薪褘 褉邪蟹写蟹械谢 邪写蟹薪邪褔邪薪褘 褟泻: \"Linux 褨屑褟\", \"Windows\n"
-"褨屑褟\" \"C胁芯泄褋褌胁褘\".\n"
-"\"Linux 袉屑褟\" 泻邪写邪胁邪薪邪 褌邪泻 - \"褌褘锌 写褘褋泻褍\", \"薪褍屑邪褉 写褘褋泻褍\",\"薪褍屑邪褉 "
-"褉邪蟹写蟹械谢褍\n"
-"(薪邪锌褉褘泻谢邪写, \"hda1\").\n"
-"\n"
-"\n"
-"\"孝褘锌 写褘褋泻褍\" 泻邪写邪胁邪薪褘 褟泻 \"hd\", 泻邪谢褨 谐褝褌邪 IDE, 褨 \"sd\" 泻邪谢褨 SCSI.\n"
-"\n"
-"\"袧褍屑邪褉 写褘褋泻褍\" - 褋褨屑胁邪谢 锌邪褋谢褟 \"hd\" 褑褨 \"sd\". 袛谢褟 IDE 写褘褋泻邪褳:\n"
-" * \"邪\" \"master\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE \n"
-" * \"b\" \"slave\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
-" * \"c\" \"master\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
-" * \"d\" \"slave\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
-"\n"
-"\n"
-"袛谢褟 SCSI 写褘褋泻邪褳 - \"a\" 谐褝褌邪 \"锌械褉褕邪褋薪褘 卸芯褉褋泻褨 写褘褋泻\", \"b\" - \"写褉褍谐邪褋薪褘 "
-"卸芯褉褋泻褨 写褘褋泻\", 褨 谐.写.\n"
-"\n"
-"\"Windows 袉屑褟\" 褋褨屑胁邪谢 胁邪褕邪谐邪 写褘褋泻褍 褳 Windows (锌械褉褕褘 写褘褋泻 褑褨\n"
-"褉邪蟹写蟹械谢 锌邪蟹薪邪褔邪械褑褑邪 褟泻 \"C:\")."
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Enabling servers..."
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"校褋械 褉邪蟹写蟹械谢褘, 褟泻褨褟 斜褘谢褨 褌芯谢褜泻褨 胁褘蟹薪邪褔邪薪褘 锌邪胁褨薪薪褘 斜褘褑褜\n"
-"邪写褎邪褉屑邪褌邪胁邪薪褘 (褎邪褉屑邪褌邪胁邪褑褜 - 蟹薪邪褔褘褑褜 褋褌胁邪褉褘褑褜 褎邪泄谢邪胁邪褞 褋褨褋褌褝屑褍).\n"
-"\n"
-"\n"
-"校 褌芯泄 卸邪 褔邪褋, 胁褘 屑芯卸邪褑械 锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褍卸芯 褨褋薪褍褞褔褘褟 褉邪蟹写蟹械谢褘, 泻邪斜 褋褑褢褉褑褨\n"
-"写邪写蟹械薪褘褟 褟泻褨褟 褟薪褘 褳褌褉褘屑谢褨胁邪褞褑褜. 袣邪谢褨 胁褘 卸邪写邪械褑械 蟹褉邪斜褨褑褜 谐褝褌邪, 邪斜褟褉褘褑械 "
-"褉邪蟹写蟹械谢褘\n"
-"褟泻褨褟 卸邪写邪械褑械 邪写褎邪褉屑邪褌邪胁邪褑褜.\n"
-"\n"
-"\n"
-"袟邪褳胁邪卸褑械, 胁褘 锌邪胁褨薪薪褘 锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褍褋械 褋褌胁芯褉邪薪褘褟 褉邪蟹写蟹械谢褘. 袙褘 锌邪胁褨薪薪褘\n"
-"锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褉邪蟹写蟹械谢褘, 褟泻褨褟 褳褌褉褘屑谢褨胁邪褞褑褜 邪锌械褉邪褑褘泄薪褍褞 褋褨褋褌褝屑褍 (褌褘锌褍 \"/"
-"\",\n"
-"\"/usr\" 褑褨 \"/var\"), 邪谢械 薪械 锌邪胁褨薪薪褘 锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褉邪蟹写蟹械谢褘, 褟泻褨褟 "
-"褍褌褉褘屑谢褨胁邪褞褑褜\n"
-"写邪写蟹械薪褘褟, 褟泻褨褟 胁褘 卸邪写邪械褑械 蟹邪褏邪胁邪褑褜 (蟹胁褘褔邪泄薪邪 /home).\n"
-"\n"
-"\n"
-"袣邪谢褨 谢邪褋泻邪, 斜褍写蟹褑械 褳胁邪卸谢褨胁褘褟, 邪斜褨褉邪褞褔褘 褉邪蟹写蟹械谢褘, 斜芯 锌邪褋谢褟 褎邪褉屑邪褌邪胁邪薪薪褟\n"
-"褍褋械 写邪写蟹械薪褘褟 斜褍写褍褑褜 薪械蟹胁邪褉芯褌薪邪 胁褘写邪谢械薪褘褟.\n"
-"\n"
-"\n"
-"袧邪褑褨褋薪褨褑械 \"孝邪泻\" 泻邪谢褨 胁褘 谐邪褌芯胁褘褟 褎邪褉屑邪褌邪胁邪褑褜 褉邪蟹写蟹械谢褟.\n"
-"\n"
-"\n"
-"袧邪褑褨褋薪褨褑械 \"袗写屑械薪邪\" 泻邪谢褨 卸邪写邪械褑械 邪斜褉邪褑褜 褨薪褕褘褟 褉邪蟹写蟹械谢褘 写谢褟 "
-"褍褋褌邪谢褟胁邪薪薪褟胁邪褕邪泄\n"
-"薪芯胁邪泄 邪锌械褉邪褑褘泄薪邪泄 褋褨褋褌褝屑褘 Mandrake Linux."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "校卸芯 褢褋褑褜 褉邪蟹写蟹械谢 蟹 锌褍薪泻褌邪屑 屑邪薪褑i褉邪胁邪薪薪褟 %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -1789,51 +1752,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"校 谐褝褌褘屑 锌褍薪泻褑械, 胁褘 锌邪胁褨薪薪褘 邪斜褉邪褑褜 写蟹械 薪邪 胁邪褕褘屑 卸芯褉褋泻褨屑 \n"
"写褘褋泻褍 褍褋褌邪谢褟胁邪褑褜 邪锌械褉邪褑褘泄薪褍褞 褋褨褋褌褝屑褍 Mandrake Linux. 袣邪谢褨 写褘褋泻 锌褍褋褌褘\n"
@@ -1894,171 +1855,120 @@ msgstr ""
" 谢褢谐泻邪 蟹谐褍斜褨褑褜 褋胁邪械 写邪写蟹械薪褘褟. 孝邪屑褍 薪械 邪斜褨褉邪泄褑械 谐褝褌褍褞 芯锌褑褘褞 泻邪谢褨 胁褘薪械 胁械写邪械褑械 "
"褕褌芯 褉芯斜褨褑械."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "校泻褉邪i薪褋泻i"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "External ISDN modem"
+msgstr "校薪褍褌褉邪薪邪褟 ISDN 泻邪褉褌邪"
+
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Your choice? (default %s) "
+msgstr "袙邪褕 胁褘斜邪褉? (蟹屑芯褳褔邪薪薪械 %s) "
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"孝褝褋褌邪胁褘褟 褋褌邪褉芯薪泻i 邪写锌褉邪褳谢械薪褘 写褝屑邪薪褍 写褉褍泻褍.\n"
+"袩械褉邪写 褌褘屑, 褟泻 锌褉褘薪褌褝褉 蟹邪锌褉邪褑褍械, 屑芯卸邪 锌褉邪泄褋褑i 锌褝褳薪褘 褔邪褋.\n"
+"小褌邪褌褍褋 写褉褍泻褍:\n"
+"%s\n"
"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
+"衼薪 锌褉邪褑褍械 薪邪褉屑邪谢褜薪邪?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "I褋谢邪薪写褋泻i"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "kernel version"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2073,6369 +1983,6304 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
+
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Autoprobe"
+msgstr "袗褳褌邪锌芯褕褍泻"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
+msgid "Can't use broadcast with no NIS domain"
+msgstr "袧械屑邪谐褔褘屑邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 broadcast 斜械蟹 写邪屑械薪邪 NIS"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
+msgid "drakfloppy"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"袛邪谢械泄 邪写蟹薪邪褔邪薪褘 褍褋械 褨褋薪褍褞褔褘褟 褉邪蟹写蟹械谢褘 Linux, 蟹薪芯泄写蟹械薪褘褟 薪邪 胁邪褕褘屑 写褘褋泻褍,\n"
-" 褟泻褨褟 蟹褉芯斜谢械薪褘 屑邪泄褋褌褉邪屑 胁褘谢褍褔褝薪薪褟 写褘褋泻邪褳. 袙褘 屑芯卸邪褑械 锌邪泻褨薪褍褑褜 褨褏 褌邪泻 褨 "
-"胁褘泻邪褉褘褋褌褳胁邪褑褜\n"
-" 写邪谢械泄, 斜芯 褟薪褘 写芯斜褉邪 锌邪写褘褏芯写蟹褟褑褜 写谢褟 蟹胁褘褔邪泄薪邪谐邪 胁褘泻邪褉褘褋褌邪薪薪褟. 袣邪谢褨 胁褘\n"
-" 褳薪芯褋褨褑械 蟹屑械薪褘, 胁褘 锌邪胁褨薪薪褘, 胁褘谢褍褔褘褑褜 褏邪褑褟 褉邪蟹写蟹械谢 (\"/\"). 袪邪斜褨褑械\n"
-" 褉邪蟹写蟹械谢 薪械 胁械谢褜屑褨 屑邪谢褘屑, 斜芯 褳 邪写胁邪褉芯褌薪褘屑 胁褘锌邪写泻褍 胁褘 薪褟 蟹写芯谢械械褑械 褍褋褌邪谢褟胁邪褑褜\n"
-" 写邪褋褌邪褌泻芯胁邪 锌褉邪谐褉邪屑薪邪谐邪 蟹邪斜械褋锌褟褔褝薪薪褟.袣邪谢褨 胁褘 卸邪写邪械褑械 蟹邪褏邪胁邪褑褜 胁邪褕褘褟 "
-"写邪写蟹械薪褘褟\n"
-" 薪邪 邪褋芯斜薪褘屑 褉邪蟹写蟹械谢械, 胁褘 锌邪胁褨薪薪褘 邪斜褉邪褑褜 锌褍薪泻褌 屑邪薪褑褨褉邪胁邪薪薪褟 \"/home\".\n"
-"\n"
-"袣芯卸薪褘 褉邪蟹写蟹械谢 锌邪蟹薪邪褔邪薪褘 薪邪褋褌褍锌薪褘屑 褔褘薪邪屑 \"袉屑褟\", \"小胁芯泄褋褌胁褘\".\n"
-"\n"
-"\n"
-"\"袉屑褟\" 泻邪写邪胁邪薪邪 褌邪泻 - \"褌褘锌 写褘褋泻褍\", \"薪褍屑邪褉 写褘褋泻褍\", \"薪褍屑邪褉 褉邪蟹写蟹械谢褍\" \n"
-"(薪邪锌褉褘泻谢邪写, \"hda1\").\n"
-"\n"
-"\n"
-"\"孝褘锌 写褘褋泻褍\" 泻邪写邪胁邪薪褘 褟泻 \"hd\", 泻邪谢褨 谐褝褌邪 IDE, 褨 \"sd\" 泻邪谢褨 SCSI.\n"
-" * \"邪\" \"master\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE \n"
-" * \"b\" \"slave\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
-" * \"c\" \"master\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
-" * \"d\" \"slave\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
-"\n"
-"\n"
-"袛谢褟 SCSI 写褘褋泻邪褳 - \"a\" 谐褝褌邪 \"锌械褉褕邪褋薪褘 卸芯褉褋泻褨 写褘褋泻\", \"b\" - \"写褉褍谐邪褋薪褘 "
-"卸芯褉褋泻褨 写褘褋泻\", 褨 谐.写."
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+msgid "Peru"
msgstr ""
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "袦褘褕: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "袙褘写邪谢i褑褜 Windows(TM)"
-#: ../../install2.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "袟邪锌褍褋泻邪械 i 锌褉褘锌褘薪褟械 X Font Server 锌褉褘 蟹邪谐褉褍蟹褑褘 i 胁褘泻谢褞褔褝薪薪i."
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-"袩邪屑褘谢泻邪: 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳 薪械 蟹薪邪泄写蟹械薪褘 邪写锌邪胁械写薪褘褟 \n"
-"锌褉褘谢邪写褘. 袩褉邪胁械褉褑械 邪斜褋褌邪谢褟胁邪薪薪械 写谢褟 锌芯褕褍泻褍 i屑邪胁械褉薪邪泄 锌褉褘褔褘薪褘."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "袩邪屑褘谢泻邪 褔褘褌邪薪薪褟 褎邪泄谢褍 %s"
+msgid "Madagascar"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+msgid "System"
+msgstr "Mouse Systems"
-#: ../../install_any.pm:1
-#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "袧械屑邪谐褔褘屑邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 broadcast 斜械蟹 写邪屑械薪邪 NIS"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 aboot?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
"\n"
-"Do you really want to remove these packages?\n"
+"- Options:\n"
+msgstr "袨锌褑褘i"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "袩邪褉芯谢褜"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr "%d 褏胁i谢i薪"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Graphics card: %s"
+msgstr "袙i写褝邪泻邪褉褌邪: %s"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV transfer failed!"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "No"
-msgstr "袧械"
+msgid "XFree configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 XFree"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Yes"
-msgstr "孝邪泻"
+msgid "Choose action"
+msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr ""
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
"\n"
-"Do you really want to install these servers?\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "校褋褌邪谢褟胁邪薪薪械 SILO"
-
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "袛邪谢褍褔褝薪薪械 写邪 褋械褌泻i"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "袩邪写褉褘褏褌芯褳泻邪 褉邪蟹写械谢邪褳 薪械 褳写邪谢邪褋褟: %s"
+msgid "Installing driver for %s card %s"
+msgstr "校褋褌邪谢褟胁邪薪薪械 写褉邪泄胁械褉褍 写谢褟 %s 泻邪褉褌褘 %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "袦邪泄褋褌邪褉 锌邪写褉褘褏褌芯褳泻i 褉邪蟹写蟹械谢邪褳 DrakX 蟹薪邪泄褕芯褳 薪邪褋褌褍锌薪褘褟 胁邪褉褘褟薪褌褘:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "I can't find any room for installing"
-msgstr "袛邪写邪褑褜 褉邪蟹写蟹械谢 薪械屑邪谐褔褘屑邪"
+msgid "Enable Server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"袙褘 屑芯卸邪褑械 褑褟锌械褉 褉邪蟹斜i褑褜 胁邪褕 写褘褋泻 %s\n"
-"袩邪 蟹邪泻邪薪褔褝薪薪i 薪械 蟹邪斜褍写蟹褜褑械褋褟 蟹邪褏邪胁邪褑褜 蟹屑褟薪械薪薪i, 褋泻邪褉褘褋褌邪褳褕褘 `w'"
+msgid "Ukrainian"
+msgstr "校泻褉邪i薪褋泻i"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 fdisk"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Custom disk partitioning"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 i褋薪褍褞褔褘 褉邪蟹写蟹械谢"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "校褋械 i褋薪褍褞褔褘褟 褉邪蟹写蟹械谢褘 薪邪 写褘褋泻褍 %s i 写邪写蟹械薪褘褟 薪邪 i褏 斜褍写褍褑褜 褋褌褉邪褔邪薪褘"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "褋械褌泻邪胁邪褟 泻邪褉褌邪 薪械 蟹薪芯泄写蟹械薪邪"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "袧邪 褟泻i 蟹 屑邪褞褔褘褏褋褟 卸芯褉褋褌泻i褏 写褘褋泻邪褳 袙褘 卸邪写邪械褑械 褳褋褌邪谢褟胁邪褑褜 Linux?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "袙褘写邪谢i褑褜 Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Erase entire disk"
-msgstr "小褑褢褉褑i 写邪写蟹械薪褘褟 薪邪 褳褋i屑 写褘褋泻褍"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "袙褘写邪谢i褑褜 Windows(TM)"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"袧械 蟹薪芯泄写蟹械薪邪 褉邪蟹写蟹械谢邪褳 FAT 写谢褟 蟹屑褟薪械薪薪褟 锌邪屑械褉邪褳 邪谢褜斜芯 胁褘泻邪褉褘褋褌邪薪薪褟\n"
-"褳 褟泻邪褋褑i 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (褑i 薪械写邪褋褌邪褌泻芯胁邪 锌褉邪褋褌芯褉褘 薪邪 写褘褋泻褍)"
+"LILO (邪写 LInux LOader) i Grub - 谐褝褌邪 蟹邪谐褉褍蟹褔褘泻i. 携薪褘 屑芯谐褍褑褜 蟹邪谐褉褍蟹i褑褜 "
+"写褉褍谐褍褞\n"
+"GNU/Linux 褑i 谢褞斜褍褞 i薪褕褍褞 邪锌械褉邪褑褘泄薪褍褞 褋i褋褌褝屑褍, 褍褋褌邪谢褟胁邪薪褍褞 薪邪 泻邪屑锌褍褌邪褉褘.\n"
+"袟胁褘褔邪泄薪邪, 谐褝褌褘褟 i薪褕褘褟 邪锌械褉邪褑褘泄薪褘褟 褋i褋褌褝屑褘 泻邪褉褝泻褌薪邪 胁褘蟹薪邪褔邪褞褑褑邪 i\n"
+"褳褋褌邪谢褢褳胁邪褞褑褑邪. 袣邪谢i 谐褝褌邪 薪械 邪褌褉褘屑邪谢邪褋褟, 褌芯 胁褘 屑芯卸邪褑械 写邪写邪褑褜 谢褞斜褘 蟹邪锌i褋\n"
+"褋邪屑邪褋褌芯泄薪邪. 袘褍写蟹褜褑械 褳锌褝褳薪械薪褘, 褕褌芯 胁褘 蟹邪写邪谢i 泻邪褉褝泻褌薪褘褟 锌邪褉邪屑械褌褉褘.\n"
+"\n"
+"\n"
+"孝邪泻褋邪屑邪 胁褘 屑芯卸邪褑械 锌邪卸邪写邪褑褜 i 薪械 写邪斜邪褳谢褟褑褜 i薪褕褘褟 邪锌械褉邪褑褘泄薪褘褟 褋i褋褌褝屑褘.\n"
+"校 褌邪泻i屑 胁褘锌邪写泻褍 锌邪褌褉褝斜薪邪 胁褘写邪谢i褑褜 邪写锌邪胁械写薪褘褟 蟹邪锌i褋褘. 袗谢械 卸 褌邪写褘 胁邪屑 \n"
+"锌邪褌褉褝斜薪邪 斜褍写蟹械 蟹邪谐褉褍蟹邪褔薪邪褟 写褘褋泻械褌邪, 泻邪斜 蟹邪谐褉褍蟹i褑褑邪!"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
+msgid "System mode"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
+"袛谢褟 写褉褍泻褍 薪邪 锌褉褘薪褌褝褉褘 NetWare 薪械邪斜褏芯写薪邪 锌邪蟹薪邪褔褘褑褜 i屑褟 褋械褉胁械褉褍 写褉褍泻褍 NetWare "
+"(薪械 蟹邪褳褋褢写褘 褋褍锌邪写邪械 蟹 i屑械薪械屑 褍 褋械褌褑褘 TCP/IP) i i屑褟 褔邪褉谐i 写褉褍泻褍, 褟泻邪褟 "
+"邪写锌邪胁褟写邪械 邪斜褉邪薪邪屑褍 锌褉褘薪褌褝褉褍, 邪 褌邪泻褋邪屑邪 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 i 锌邪褉芯谢褜."
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "袗褳褌邪蟹屑褟薪械薪薪械 锌邪屑械褉邪褳 薪械 邪褌褉褘屑邪谢邪褋褟 写谢褟 褉邪蟹写蟹械谢褍 FAT %s"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "袦邪褋泻邪 褋械褌泻i"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "袙褘谢i褔褝薪薪械 屑械卸邪褳 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 Windows"
+msgid "Append"
+msgstr "袛邪谢褍褔褘褑褜"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resizing"
-msgstr "袟屑褟薪械薪薪械 锌邪屑械褉邪褳"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "partition %s"
-msgstr "袪邪蟹写蟹械谢 %s"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "携泻褍褞 锌褉邪褋褌芯褉褍 蟹邪褏邪胁邪褑褜 写谢褟 Windows?"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"WARNING!\n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"校袙袗袚袗!\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"DrakX 蟹邪褉邪蟹 锌邪胁i薪械薪 蟹屑褟薪i褑褜 锌邪屑械褉 胁邪褕邪谐邪 褉邪蟹写蟹械谢邪 Windows.\n"
-"袘褍写蟹褜褑械 褳胁邪卸谢i胁褘: 谐褝褌邪褟 邪锌械褉邪褑褘褟 薪械斜褟褋锌械褔薪邪. 袣邪谢i 胁褘 褟褕褔褝 薪械 蟹褉邪斜i谢i \n"
-"褉褝蟹械褉胁芯胁褍褞 泻芯锌i褞 写邪写蟹械薪褘褏, 褌芯 褋锌邪褔邪褌泻褍 锌邪泻i薪褜褑械 锌褉邪谐褉邪屑褍 褳褋褌邪谢褟胁邪薪薪褟,"
-"胁褘泻邪薪邪泄褑械 scandisk i defrag 薪邪 谐褝褌褘屑 褉邪蟹写械谢械, 蟹褉邪斜i褑械 褉褝蟹械褉胁芯胁褍褞 泻芯锌i褞\n"
-"写邪写蟹械薪褘褏 i 褌芯谢褜泻i 锌芯褌褘屑 蟹薪芯褳 胁褟褉薪i褑械褋褟 写邪 锌褉邪谐褉邪屑褘 褳褋褌邪谢褟胁邪薪薪褟.\n"
-"袣邪谢i 锌邪写褉褘褏褌邪胁邪谢i褋褟, 薪邪褑i褋薪i褑械 Ok."
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"袙邪褕 褉邪蟹写蟹械谢 蟹 Windows 蟹邪薪邪写褌邪 褎褉邪谐屑械薪褌邪胁邪薪褘. \n"
-"袪褝泻邪屑械薪写褍械屑 褋锌邪褔邪褌泻褍 蟹邪锌褍褋褑i褑褜 锌褉邪谐褉邪屑褍 ``defrag''"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍 薪邪 褉邪蟹写蟹械谢械 Windows"
+msgid "Network printer \"%s\", port %s"
+msgstr "小械褌泻邪胁褘 锌褉褘薪褌褝褉 (TCP/Socket)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"校 锌褉邪谐褉邪屑褘 蟹屑械薪褘 锌邪屑械褉邪褳 褉邪蟹写蟹械谢邪 FAT 薪械 邪褌褉褘屑邪谢邪褋褟\n"
-"邪锌褉邪褑邪胁邪褑褜 袙邪褕 褉邪蟹写蟹械谢, 锌邪屑褘谢泻邪: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "袩邪屑械褉褘 褟泻芯谐邪 褉邪蟹写蟹械谢邪 胁褘 卸邪写邪械褑械 蟹屑褟薪i褑褜?"
+"袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褋械褌泻邪胁褘 邪写邪锌褌邪褉, 褟泻褨 斜褍写蟹械 胁褘泻邪褉褘褋褌邪薪褘 写谢褟 写邪谢褍褔褝薪薪褟 写邪 "
+"胁邪褕邪泄 谢邪泻邪谢褜薪邪泄 褋械褌泻i."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍 薪邪 褉邪蟹写蟹械谢械 Windows"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"袧械 蟹薪芯泄写蟹械薪邪 褉邪蟹写蟹械谢邪褳 FAT 写谢褟 蟹屑褟薪械薪薪褟 锌邪屑械褉邪褳 邪谢褜斜芯 胁褘泻邪褉褘褋褌邪薪薪褟\n"
-"褳 褟泻邪褋褑i 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (褑i 薪械写邪褋褌邪褌泻芯胁邪 锌褉邪褋褌芯褉褘 薪邪 写褘褋泻褍)"
+msgid "Please choose your keyboard layout."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褌褘锌 泻谢邪胁i褟褌褍褉褘."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "袩邪屑械褉 swap 褉邪蟹写蟹械谢褍 褳 M斜:"
+msgid "Printer Device URI"
+msgstr "URI 锌褉褘薪褌褝褉褍"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "袣邪褉邪薪褢胁褘 褉邪蟹写蟹械谢 褳 M斜: "
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the sizes"
-msgstr "袙褘斜邪褉 锌邪屑械褉邪褳"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "袩邪屑械褉褘 褟泻芯谐邪 褉邪蟹写蟹械谢邪 胁褘 卸邪写邪械褑械 蟹屑褟薪i褑褜?"
+msgid "Terminal-based"
+msgstr "薪邪 邪褋薪芯胁械 褌褝褉屑i薪邪谢褍"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 褉邪蟹写蟹械谢 Windows 写谢褟 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "袧褟屑邪 i褋薪褍褞褔褘褏 褉邪蟹写蟹械谢邪褳, 褟泻i褟 屑芯卸薪邪 胁褘泻邪褉褘褋褌邪褑褜"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "袚褝褌邪 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 褳卸芯 写邪写邪写蟹械薪邪"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 i褋薪褍褞褔褘 褉邪蟹写蟹械谢"
+msgid "Other OS (windows...)"
+msgstr "I薪褕邪褟 袗小 (windows...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "袙褘 锌邪胁i薪薪褘 屑械褑褜 褉邪蟹写蟹械谢 swap"
+msgid "Generate auto install floppy"
+msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"袧褟屑邪 褉邪蟹写蟹械谢邪 swap.\n"
-"\n"
-"校褋褢 邪写薪芯 锌褉邪褑褟谐胁邪褑褜?"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"袙褘 锌邪胁i薪薪褘 屑械褑褜 泻邪褉邪薪褢胁褘 褉邪蟹写蟹械谢.\n"
-"袛谢褟 谐褝褌邪谐邪 褋褌胁邪褉褘褑械 褉邪蟹写蟹械谢 (邪谢褜斜芯 邪写蟹薪邪褔褑械 褳卸芯 i褋薪褍褞褔褘).\n"
-"袩芯褌褘屑 邪斜褟褉褘褑械 ``袣褉芯锌泻邪 屑邪薪褑i褉邪胁邪薪薪褟'' i 褳褋褌邪薪邪胁i褑械 褟械 褳 `/'"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "NIS Domain"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+msgid "No open source driver"
msgstr ""
-"袩褝褳薪邪械 邪斜褋褌邪谢褟胁邪薪薪械 锌邪褌褉邪斜褍械 泻邪屑械褉褑褘泄薪褘褏 写褉邪泄胁械褉邪褳 写谢褟 锌褉邪褑褘.\n"
-"效邪褋褌泻芯胁邪 褨薪褎邪褉屑邪褑褘褞 锌褉邪 褨褏 屑芯卸薪邪 邪褌褉褘屑邪褑褜 褌褍褌: %s"
-#: ../../install_messages.pm:1
-#, c-format
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"袙i薪褕褍械屑, 褍褋褌邪谢褟胁邪薪薪械 蟹邪胁械褉褕邪薪邪.\n"
-"袙褘写邪谢i褑械 蟹邪谐褉褍蟹邪褔薪褘 写褘褋泻 i 薪邪褑i褋薪i褑械 enter 写谢褟 锌械褉邪蟹邪谐褉褍蟹泻i.\n"
-"\n"
-"\n"
-"袟邪 i薪褎邪褉屑邪褑褘褟泄 锌褉邪 蟹屑褟薪械薪薪i 写邪写蟹械薪邪谐邪 胁褘锌褍褋泻褍 Mandrake Linux,\n"
-"蟹胁褟褉褌邪泄褑械褋褜 薪邪 \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"I薪褎邪褉屑邪褑褘褟 锌邪 薪邪褋褌褉芯泄泻械 胁邪褕邪泄 褋i褋褌褝屑褘 褢褋褌褜 褳 锌邪褋谢褟-褳褋褌邪谢褢胁邪褔薪邪泄\n"
-"谐谢邪胁械 胁邪褕邪谐邪 袛邪锌邪屑芯卸薪i泻邪 袣邪褉褘褋褌邪谢褜薪i泻褍 蟹 袗褎i褑褘泄薪邪谐邪 Mandrake Linux."
+"袩褉褘屑邪褞褑褑邪 褳谢邪褋褑i胁邪褋褑i 4 褍蟹褉芯褳薪褟, 邪谢械 蟹邪褉邪蟹 褋i褋褌褝屑邪 锌芯褳薪邪褋褑褞 蟹邪褔褘薪械薪邪.\n"
+"袩邪褉邪屑械褌褉褘 斜褟褋锌械泻i 褳褋褌邪薪芯褳谢械薪褘 薪邪 屑邪泻褋i屑褍屑."
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Nicaragua"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "New Caledonia"
msgstr ""
-#: ../../install_messages.pm:1
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "袝褳褉芯锌邪 (EDSS1)"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "袩械褉邪褏芯写 薪邪 泻褉芯泻 `%s'\n"
+msgid "Video mode"
+msgstr "袙i写褝邪-褉褝卸褘屑"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Oman"
+msgstr "NIS Domain"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Help"
-msgstr "袛邪锌邪屑芯谐邪"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "袧邪褋褌褉芯泄泻邪 X Window"
+msgid "New size in MB: "
+msgstr "袩邪屑械褉 褍 袦斜:"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "孝褘锌 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳: %s\n"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Configure"
-msgstr "袧邪褋褌褉芯泄泻邪 X Window"
+msgid "Authentication Windows Domain"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "校褋褢 褉芯褳薪邪 锌褉邪褑褟谐胁邪褑褜?"
+msgid "US keyboard"
+msgstr "US 泻谢邪胁i褟褌褍褉邪"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "袗褌褉褘屑邪谢邪褋褟 锌邪屑褘谢泻邪 褳锌邪褉邪写泻邪胁邪薪薪褟 锌邪泻械褌邪褳:"
+msgid "Buttons emulation"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "袗褌褉褘屑邪谢邪褋褟 锌邪屑褘谢泻邪 褳锌邪褉邪写泻邪胁邪薪薪褟 锌邪泻械褌邪褳:"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"袟屑褟薪i褑械 胁邪褕 Cd-Rom!\n"
+"Drakbackup activities via tape:\n"
"\n"
-"袣邪谢i 谢邪褋泻邪, 褍褋褌邪褳褑械 Cd-Rom, 锌邪蟹薪邪褔邪薪褘 \"%s\", 褍 胁邪褕 写褘褋泻邪胁芯写 i 薪邪褑i褋薪i褑械 O泻 "
-"锌邪褋谢褟.\n"
-"袣邪谢i 胁褘 薪械 屑邪械褑械 褟谐芯, 薪邪褑i褋薪i褑械 袗写屑褟薪i褑褜, 泻邪斜 邪写屑褟薪i褑褜 褍褋褌邪谢褟胁邪薪薪械 蟹 谐褝褌邪谐邪 "
-"Cd."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Refuse"
-msgstr "袗写泻邪蟹邪褑褜"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "袩褉褘薪褟褑褜"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "袟邪褏邪胁邪薪薪械 褳 褎邪泄谢"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing package %s"
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 ADSL"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d 锌邪泻械褌邪褳"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "袩邪写褉邪斜褟蟹薪邪褋褑i"
+msgid "Bosnian"
+msgstr "协褋褌芯薪褋泻i"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Details"
-msgstr "袩邪写褉邪斜褟蟹薪邪褋褑i"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "袣邪谢i 谢邪褋泻邪, 锌邪褔邪泻邪泄褑械"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please wait, preparing installation..."
-msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
+msgid "Connection speed"
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "袟邪褋褌邪谢芯褋褟 褔邪褋褍 "
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Estimating"
-msgstr "效邪泻邪械褑褑邪"
+msgid "Namibia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "校褋褌邪谢褢褳胁邪械屑"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "袧械 邪褌褉褘屑谢i胁邪械褑褑邪 写邪写邪褑褜 褉邪蟹写蟹械谢 薪邪 _邪写褎邪褉屑邪褑i褉邪胁邪薪褘_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "袙褘写邪谢i褑褜 蟹 褋i褋褌褝屑褘"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"袙邪褕邪 胁i写褝邪泻邪褉褌邪 屑芯卸邪 屑械褑褜 3D-锌邪褋泻邪褉褝薪薪械, 褟泻芯械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 褌芯谢褜泻i XFree %"
+"s.\n"
+"袦袗袡笑袝 袧袗 袔袙袗袟袝, 楔孝袨 袚协孝袗 协袣小袩袝袪蝎袦袝袧孝袗袥鞋袧袗携 袩袗袛孝袪蝎袦袣袗 I 袦袨袞袗 袩袪蝎袙袝小笑I 袛袗\n"
+"袟袗袙I小袗袧袧携 袙袗楔袗袚袗 袣袗袦袩'挟孝协袪校. 袙邪褕邪 胁i写褝邪泻邪褉褌邪 锌邪写褌褉褘屑谢i胁邪械褑褑邪 XFree %s, 褟泻i\n"
+"谢械锌械泄 锌邪写褌褉褘屑谢i胁邪械 泻邪褉褌褘 蟹 2D-锌邪褋泻邪褉褝薪薪械屑."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+msgid "Please wait, setting security options..."
+msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "<- Previous"
+msgid "Launch the graphical environment when your system starts"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "校褋褌邪谢褢褳泻邪"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show automatically selected packages"
+msgid " Successfuly Restored on %s "
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "袙褘 薪械 屑芯卸邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍. 携谐芯 锌邪褌褉褝斜薪邪 邪斜薪邪胁i褑褜"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Antigua and Barbuda"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"袚褝褌褘 锌邪泻械褌 锌邪胁i薪械薪 斜褘褑褜 邪斜薪芯褳谢械薪褘\n"
-"袙褘 褳锌褝褳薪械薪褘, 褕褌芯 褏芯褔邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "袙褘 薪械 屑芯卸邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍. 衼薪 褍卸芯 褳褋褌邪谢褟胁邪薪褘"
+msgid "Spanish"
+msgstr "I褋锌邪薪褋泻i"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "袚褝褌邪 邪斜邪胁褟蟹泻芯胁褘 锌邪泻械褌, 褟谐芯 胁褘谢褍褔褝薪薪械 薪械谢褜谐邪 邪写屑褟薪i褑褜"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "袙褘 薪械 屑芯卸邪褑械 胁褘谢褍褔邪褑褜 褨 邪写屑褟薪褟褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍"
+msgid "Normal modem connection"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "袙褘斜邪褉 谐褉褍锌褘 锌邪泻械褌邪褳"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 胁褘写邪谢械薪褘"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 写邪写邪薪褘 写邪 褋i褋褌褝屑褘"
+msgid "CUPS"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "Run config tool"
msgstr ""
-"袙褘 薪械 屑芯卸邪褑械 胁褘斜褉邪褑褜 谐褝褌褘 锌邪泻械褌, 褌邪屑褍 褟泻 薪械 褏邪锌邪械 屑械褋褑邪 写谢褟 褟谐芯 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "袟薪邪褔薪邪褋褑褜: %s\n"
+msgid "Bootloader installation"
+msgstr "校褋褌邪谢褟胁邪薪薪械 蟹邪谐褉褍蟹褔褘泻褍"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "袩邪屑械褉: %d K斜\n"
+msgid "Root partition size in MB: "
+msgstr "袣邪褉邪薪褢胁褘 褉邪蟹写蟹械谢 褳 M斜: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "袙械褉褋i褟: %s\n"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "袚褝褌邪 邪斜邪胁褟蟹泻芯胁褘 锌邪泻械褌, 褟谐芯 胁褘谢褍褔褝薪薪械 薪械谢褜谐邪 邪写屑褟薪i褑褜"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Name: %s\n"
-msgstr "I屑褟: %s\n"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) - 谐褝褌邪 褋械褉胁械褉 写邪屑械薪薪褘褏 i屑褢薪邪褳, 褟泻i 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 写谢褟\n"
+"锌械褉邪泻谢邪写邪薪薪褟 i屑褢薪 胁褍蟹谢芯褳 褍 IP 邪写褉邪褋褘."
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bad package"
-msgstr "袛褉褝薪薪褘 锌邪泻械褌"
+msgid "Disconnect..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "袉薪褕褘褟"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "袩芯褉褌"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "袗谐褍谢褜薪褘 锌邪屑械褉: %d / %d M斜"
+msgid "Palau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Next ->"
-msgstr "袛邪谢械泄 ->"
+msgid "level"
+msgstr "褍蟹褉芯胁械薪褜"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Individual package selection"
-msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "袙褘斜邪褉 谐褉褍锌褘 锌邪泻械褌邪褳"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"校 袙邪褕邪泄 褋i褋褌褝屑械 屑邪械褑褑邪 薪械写邪褏芯锌 褉褝褋褍褉褋邪褳, 褌邪屑褍 屑邪谐褔褘屑褘 锌褉邪斜谢械屑褘\n"
-"锌褉褘 褳褋褌邪谢褟胁邪薪薪i Mandrake Linux. 校 谐褝褌褘屑 胁褘锌邪写泻褍 锌邪褋锌褉邪斜褍泄褑械 褌褝泻褋褌邪胁褍褞\n"
-"锌褉邪谐褉邪屑褍 褳褋褌邪谢褟胁邪薪薪褟. 袛谢褟 谐褝褌邪谐邪 薪邪褑i褋薪i褑械 `F1' 褍 褔邪褋 蟹邪谐褉褍蟹泻i, 邪 锌芯褌褘屑\n"
-"薪邪斜褟褉褘褑械 `text' i 薪邪褑i褋薪i褑械 <ENTER>."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Save packages selection"
-msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Automated"
-msgstr "袗褳褌邪屑邪褌褘褔薪褘"
+msgid "Choose the resolution and the color depth"
+msgstr "袙褘斜邪褉 锌邪屑械褉邪褳 褝泻褉邪薪褍 i 谐谢褘斜i薪i 泻芯谢械褉褍"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Replay"
-msgstr "袩械褉邪蟹邪谐褉褍蟹i褑褜"
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr "协屑褍谢褟胁邪褑褜 褌褉褝褑褞褞 泻薪芯锌泻褍?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount"
+msgstr "袦邪薪褑i褉邪胁邪薪薪械"
+
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Generate auto install floppy"
+msgid "Creating auto install floppy"
msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Install updates"
+msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "text box height"
msgstr ""
-"袧械泻邪褌芯褉褘褟 泻褉芯泻i 薪械 蟹邪胁械褉褕邪薪褘.\n"
-"袙褘 褋邪锌褉邪褳写褘 卸邪写邪械褑械 胁褘泄褋褑i 蟹邪褉邪蟹?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "State"
+msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Be sure a media is present for the device %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../any.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+msgid "Enable multiple profiles"
+msgstr "袛邪褋褌褍锌薪邪 褕屑邪褌 锌褉芯褎i谢褟褳"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "袩褉邪褑褝褋 褍褋褌邪谢褟胁邪薪薪褟 蟹邪谐褉褍蟹褔褘泻邪 薪械 邪褌褉褘屑邪褳褋褟. 校蟹薪i泻谢邪 薪邪褋褌褍锌薪邪褟 锌邪屑褘谢泻邪:"
+msgid "Local printer"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "校褋褌邪谢褟胁邪薪薪械 蟹邪谐褉褍蟹褔褘泻褍"
+msgid "Package selection"
+msgstr "袙褘斜邪褉 谐褉褍锌褘 锌邪泻械褌邪褳"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
msgstr ""
-"袩邪屑褘谢泻邪 褳褋褌邪谢褟胁邪薪薪褟 邪boot, \n"
-"褋锌褉邪斜邪胁邪褑褜 褍褋褌邪谢褢褳胁邪褑褜, 薪械谐谢械写蟹褟褔褘 薪邪 屑邪谐褔褘屑邪褋褑褜 锌邪褉褍褕褝薪薪褟 锌械褉褕邪谐邪 褉邪蟹写械谢褍?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 aboot?"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "All primary partitions are used"
+msgstr "校褋械 锌械褉褕邪褋薪褘褟 褉邪蟹写蟹械谢褘 胁褘泻邪褉褘褋褌邪薪褘"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "袩邪写褉褘褏褌芯褳泻邪 蟹邪谐褉褍蟹褔褘泻邪"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Domain Admin Password"
-msgstr "袩邪写褑胁械褉写蟹i褑褜 锌邪褉芯谢褜"
+msgid "Installation Server Configuration"
+msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "I屑褟 写邪屑械薪褍"
+#, c-format
+msgid "Configuring IDE"
+msgstr "袧邪褋褌褉芯泄泻邪 IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
+msgid "Network functionality not configured"
+msgstr "袦邪薪i褌芯褉 锌邪泻褍谢褜 薪械 薪邪褋褌褉芯械薪褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
+msgid "Configure module"
+msgstr "袧邪褋褌褉芯泄泻邪 屑褘褕褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS 褋械褉胁械褉:"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domain"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "袣邪斜 蟹屑褟薪械薪薪i 褳褋褌褍锌i谢i 褳 写蟹械褟薪薪械, 薪械芯斜褏芯写薪邪 锌械褉邪蟹邪谐褉褍蟹i褑褑邪"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟 NIS"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider phone number"
+msgstr "袧褍屑邪褉 褌褝谢械褎芯薪褍 锌褉邪胁邪泄写邪褉邪"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "NIS"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 NIS"
+msgid "Host %s"
+msgstr "I屑褟 屑邪褕褘薪褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "褋械褉胁械褉"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
+msgid "Armenia"
+msgstr "袗褉屑褟薪褋泻i (褋褌邪褉褘)"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
+msgid "Fiji"
+msgstr "肖i薪褋泻i"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "LDAP"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Local files"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication"
-msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
+msgid "Second floppy drive"
+msgstr "袛褉褍谐i 写褘褋泻邪胁芯写"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid "About Harddrake"
msgstr ""
-"袚褝褌褘 锌邪褉芯谢褜 蟹邪薪邪写褌邪 锌褉芯褋褌褘 (褟谐芯 写邪褳卸褘薪褟 锌邪胁i薪薪邪 斜褘褑褜 薪械 屑械薪械泄 蟹邪 %d 谢i褌邪褉邪褳)"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No password"
-msgstr "袧褟屑邪 锌邪褉芯谢褞"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "袩邪褉芯谢褜 写谢褟 root"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写\n"
+"校褋械 写邪写蟹械薪褘褟 薪邪 谐褝褌邪泄 写褘褋泻械褑械 斜褍写褍褑褜 褋褌褉邪褔邪薪褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Size: %s"
+msgstr "袩邪屑械褉: %s"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Services"
-msgstr "锌褉褘谢邪写邪"
+msgid "secondary"
+msgstr "%d 褋械泻褍薪写邪褳"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System"
-msgstr "Mouse Systems"
+msgid "View Backup Configuration."
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "袩芯褉褌"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "袚邪谢芯褳薪褘褟 芯锌褑褘i 锌邪褔邪褌泻芯胁邪谐邪 蟹邪谐褉褍蟹褔褘泻褍"
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No password"
+msgstr "袧褟屑邪 锌邪褉芯谢褞"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+msgid "Nigeria"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "孝邪斜谢i褑邪"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no existing partition to use"
+msgstr "袧褟屑邪 i褋薪褍褞褔褘褏 褉邪蟹写蟹械谢邪褳, 褟泻i褟 屑芯卸薪邪 胁褘泻邪褉褘褋褌邪褑褜"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "activated"
-msgstr "袗泻褌褘褳薪褘"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Firewall"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"袣邪斜 写褉褍泻邪胁邪褑褜 锌褉邪蟹 褋芯泻械褌 写褉褍泻邪褉泻i, 胁邪屑 薪械邪斜褏芯写薪邪 蟹邪斜褟褋锌械褔褘褑褜\n"
+"i屑褟 锌褉褘薪褌褝褉褍 i 屑邪谐褔褘屑邪 褟谐芯 薪褍屑邪褉 锌芯褉褌褍."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Security"
-msgstr "泻褍褔邪褉邪胁褘"
+msgid "Hard drive information"
+msgstr "I薪褎邪褉屑邪褑褘褟"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian"
+msgstr "袪褍褋泻i"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network"
-msgstr "小械褌泻邪:"
+msgid "Jordan"
+msgstr "I褉邪薪褋泻i"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+msgid "Hide files"
+msgstr "mkraid 薪械 锌褉邪褑邪蟹写芯谢褜薪褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "袟邪锌褍褋泻 X 锌褉褘 褋褌邪褉褑械 褋i褋褌褝屑褘"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Auto-detect printers connected to this machine"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "TV card"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Sorry, no floppy drive available"
+msgstr "袙褘斜邪褔邪泄褑械, 邪谢械 写褘褋泻邪胁芯写 薪械写邪褋褌褍锌薪褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Bolivia"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "笑i 褢褋褑褜 褍 胁邪褋 i薪褕褘?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Sound card"
-msgstr "小褌邪薪写邪褉褌薪褘"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 CUPS"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "No printer"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "袩褉褘薪褌褝褉"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Mouse"
-msgstr "袩芯褉褌 屑褘褕褘"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Timezone"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "袣谢邪胁i褟褌褍褉邪"
+msgid "Bad package"
+msgstr "袛褉褝薪薪褘 锌邪泻械褌"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Summary"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS 褋械褉胁械褉:"
+msgid "DrakSec Basic Options"
+msgstr "袨锌褑褘i"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "袙邪褕 褋i褋褌褝屑薪褘 谐邪写蟹i薪薪i泻 褍褋褌邪谢褟胁邪薪褘 薪邪 GMT?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Which is your timezone?"
-msgstr "携泻i 胁邪褕 褔邪褋邪胁褘 锌芯褟褋?"
+msgid "Romania"
+msgstr "NIS Domain"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "袞邪写邪械褑械 薪邪褋褌褉芯i褑褜 锌褉褘薪褌褝褉?"
+msgid "choose device"
+msgstr "袟邪谐褉褍蟹邪褔薪邪褟 锌褉褘谢邪写邪"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "袟褉邪斜i褑褜 薪械邪泻褌褘褳薪褘屑 褋械褌泻邪胁邪械 蟹谢褍褔褝薪薪械"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "小褍胁褟蟹褜 蟹 谢褞褉邪屑 写谢褟 邪褌褉褘屑邪薪薪褟 褋锌i褋褍 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
+msgid "Canada"
+msgstr "袣邪薪邪写褋泻i (袣胁械斜褝泻)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "袙褘斜邪褉 谢褞褋褌褉邪 写谢褟 邪褌褉褘屑邪薪薪褟 锌邪泻械褌邪褳"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "小褍胁褟蟹褜 蟹 谢褞褉邪屑 写谢褟 邪褌褉褘屑邪薪薪褟 褋锌i褋褍 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
+msgid "Remove from LVM"
+msgstr "袙褘写邪谢i褑褜 蟹 LVM"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "Timezone"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German"
+msgstr "袧褟屑械褑泻i"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Next ->"
+msgstr "袛邪谢械泄 ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s\n"
-"%d%%"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
+msgid "Guinea-Bissau"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom 锌邪蟹薪邪褔邪薪褘 \"%s\""
+msgid "Horizontal refresh rate"
+msgstr "效邪褋褑褨薪褟 谐邪褉褘蟹邪薪褌邪谢褜薪褘泄 褉邪蟹谐芯褉褌泻i"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"袣邪谢i 胁褘 屑邪械褑械 褳褋械 CD 写褘褋泻i 褋邪 褋锌i褋邪 薪i卸褝泄, 薪邪褑i褋薪i褑械 袨泻.\n"
-"袣邪谢i 胁褘 薪械 屑邪械褑械 邪薪i 胁芯写薪邪谐邪 蟹 谐褝褌褘褏 CD 写褘褋泻邪褳, 薪邪褑i褋薪i褑械 袗写屑褟薪i褑褜.\n"
-"袣邪谢i 薪械泻邪褌芯褉褘褏 蟹 CD 写褘褋泻邪褳 薪械 屑邪械褑械, 邪写屑褟薪i褑械 i褏 胁褘写蟹褟谢械薪薪械 i 薪邪褑i褋薪i褑械 袨泻."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "校褋褢"
+"袧械谢褜谐邪 褳褋褌邪谢褟胁邪褑褜 锌褍薪泻褌 屑邪薪褑i褉邪胁邪薪薪褟, 褌邪屑褍 褕褌芯 褉邪蟹写械谢 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 写谢褟\n"
+"胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘.\n"
+"小锌邪褔邪褌泻褍 胁褘写邪谢i褑械 胁i褉褌褍邪谢褜薪褍褞 褋i褋褌褝屑褍"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
+msgid "USB controllers"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, fuzzy, c-format
-msgid "With X"
-msgstr "效邪泻邪泄褑械"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
+msgid "What norm is your TV using?"
+msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Type of install"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褍褋褌邪谢褟胁邪薪薪褟"
+msgid "Type:"
+msgstr "孝褘锌: "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
+msgid "Share name"
+msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+msgid "enable"
+msgstr "孝邪斜谢i褑邪"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "小褍胁褟蟹褜 蟹 谢褞褉邪屑 写谢褟 邪褌褉褘屑邪薪薪褟 褋锌i褋褍 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Package selection"
-msgstr "袙褘斜邪褉 谐褉褍锌褘 锌邪泻械褌邪褳"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+msgid "Remove the loopback file?"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 胁i褉褌褍邪谢褜薪邪谐邪 褉邪蟹写蟹械谢褍 %s"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Selected size is larger than available space"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "NCP server name missing!"
msgstr ""
-"袙邪褕邪 褋i褋褌褝屑邪 薪械 屑邪械 写邪褋褌邪泻芯胁邪 屑械褋褑邪 写谢褟 褳褋褌邪谢褟胁邪薪薪褟 褑i 邪斜薪邪褳谢械薪薪褟 (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "袩褉邪谐谢褟写 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "袩芯褕褍泻 锌邪泻械褌邪褳 写谢褟 邪斜薪邪褳谢械薪薪褟"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "袙褘 薪械 屑芯卸邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍. 衼薪 褍卸芯 褳褋褌邪谢褟胁邪薪褘"
+msgid "Hard Disk Backup files..."
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "袩褉邪谐谢褟写 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
+msgid "Laotian"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Samoa"
msgstr ""
-"袧械 褏邪锌邪械 屑械褋褑邪 褳 斜褍褎械褉褘 锌邪写泻邪褔泻i (swap) 写谢褟 褳褋褌邪谢褟胁邪薪薪褟, 锌邪胁褟谢i褔褑械 褟谐芯."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
+"袩褉邪褌邪泻芯谢 rstat 写邪蟹胁邪谢褟械 泻邪褉褘褋褌邪谢褜薪i泻邪屑 褋械褌泻i 邪褌褉褘屑谢i胁邪褑褜\n"
+"锌邪屑械褉褘 薪邪谐褉褍蟹泻i 写谢褟 泻芯卸薪邪泄 屑邪褕褘薪褘 褋械褌泻i."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "袩褉邪胁械褉褘褑褜 薪邪 薪邪褟褳薪邪褋褑褜 写褉褝薪薪褘褏 斜谢芯泻邪褳?"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "袙褘斜邪褉 褉邪蟹写蟹械谢邪褳 写谢褟 褎邪褉屑邪褌邪胁邪薪薪褟"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "袣邪斜 屑邪写褘褎i泻邪褑褘褟 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳 蟹写械泄褋薪i谢邪褋褟, 锌邪褌褉褝斜薪邪 锌械褉邪蟹邪谐褉褍蟹泻邪."
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "袩邪锌褟褉褝写卸邪薪薪械: 褌褝褋褑i褉邪胁邪薪薪械 薪邪 谐褝褌邪泄 胁i写褝邪泻邪褉褑械 薪械斜褟褋锌械褔薪邪"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 锌邪胁i薪薪邪 蟹屑褟褕褔邪褑褜 谢i褌邪褉褘 褌芯谢褜泻i 薪邪 薪i卸薪i屑 褉褝谐i褋褌褉褘, \n"
+"谢i褔斜褘, `-' i `_'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "袗斜褟褉褘褑械 锌褍薪泻褌褘 屑邪薪褑i褉邪胁邪薪薪褟"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "邪斜邪胁褟蟹泻芯胁邪"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "No partition available"
-msgstr "薪褟屑邪 写邪褋褌褍锌薪褘褏 褉邪蟹写蟹械谢邪褳"
+msgid "Welcome To Crackers"
+msgstr "小邪褉写褝褔薪邪 蟹邪锌褉邪褕邪械屑 褍 Crackers"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "袧邪褋褌褉芯泄泻邪 IDE"
+msgid "Module options:"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "袧邪褋褌褉芯泄泻邪 泻邪褉褌 PCMCIA ..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Abort"
+msgstr "袗写屑褟薪i褑褜"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button 3 Emulation"
+msgid "No password prompt on %s at port %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button 2 Emulation"
+msgid "\t-CDROM.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Buttons emulation"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"袙邪褕 褉邪蟹写蟹械谢 蟹 Windows 蟹邪薪邪写褌邪 褎褉邪谐屑械薪褌邪胁邪薪褘. \n"
+"袪褝泻邪屑械薪写褍械屑 褋锌邪褔邪褌泻褍 蟹邪锌褍褋褑i褑褜 锌褉邪谐褉邪屑褍 ``defrag''"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 锌芯褋谢褟写芯褳薪褘 锌芯褉褌, 写邪 褟泻芯谐邪 锌邪写泻谢褞褔邪薪邪 胁邪褕邪褟 屑褘褕."
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (袧邪褉胁械卸褋泻i)"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "袩芯褉褌 屑褘褕褘"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+msgid "Unable to fork: %s"
+msgstr "袟褉邪斜i褑褜 薪械邪泻褌褘褳薪褘屑 褋械褌泻邪胁邪械 蟹谢褍褔褝薪薪械"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "袩邪褉芯谢i 薪械 褋褍锌邪写邪褞褑褜"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Type: "
+msgstr "孝褘锌: "
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "袪邪蟹写蟹械谢 %s"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Edit Client"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "袗斜褟褉褘褑械 褳褋褌邪谢褟胁邪薪薪械 褑i 邪斜薪邪褳谢械薪薪械"
+msgid "no fonts found"
+msgstr "袧械 蟹薪邪泄褕谢i %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "校褋褌邪谢褢褳泻邪"
+msgid "Mouse"
+msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr ""
+msgid "not enough room in /boot"
+msgstr "袧械 褏邪锌邪械 写褘褋泻邪胁邪泄 锌褉邪褋褌芯褉褘 褳 /boot"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褌褘锌 泻谢邪胁i褟褌褍褉褘."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Quit"
-msgstr "袙褘褏邪写"
+msgid "Host name"
+msgstr "I屑褟 屑邪褕褘薪褘"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "License agreement"
-msgstr "袥褨褑褝薪蟹褨泄薪邪褟 写邪屑芯胁邪"
+msgid "Liechtenstein"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "An error occurred"
-msgstr "袗写斜褘谢邪褋褟 锌邪屑褘谢泻邪"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Suppress Fonts Files"
msgstr ""
-" <Tab>/<Alt-Tab> 锌邪屑i卸 褝谢械屑械薪褌邪屑i | <Space> 胁褘斜邪褉 | <F12> 薪邪褋褌褍锌薪褘 褝泻褉邪薪 "
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "校褋褌邪谢褟胁邪薪薪械 Mandrake Linux %s"
+msgid "Add to RAID"
+msgstr "袛邪写邪褑褜 写邪 RAID"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "袛褘褋泻邪胁芯写 薪械写邪褋褌褍锌薪褘"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "袪袔袪掳小袀袪覒小袑小鈥⌒犘呅犅 袪路袪掳袪褩小袀袪掳小鈧犅靶犅敌犙 小褤 %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "袛褘褋泻邪胁芯写 薪械写邪褋褌褍锌薪褘"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"袧械泻邪褌芯褉褘褟 胁邪卸薪褘褟 锌邪泻械褌褘 薪械 斜褘谢i 褳褋褌邪谢褟胁邪薪褘 泻邪褉褝泻褌薪邪.\n"
-"袛褉褍谐i 胁邪褕 cdrom 写褘褋泻 褑i 胁邪褕 cdrom 屑邪褞褑褜 写褝褎械泻褌褘.\n"
-"袩褉邪胁械褉褑械 cdrom 薪邪 胁邪褕褘屑 泻邪屑锌褍褌邪褉褘, 胁褘泻邪褉褘褋褌芯褳胁邪褞褔褘\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+msgid "Continue anyway?"
+msgstr "小邪锌褉邪褳写褘 锌褉邪褑褟谐胁邪褑褜?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-"校蟹薪i泻谢邪 锌邪屑褘谢泻邪, 褟泻褍褞 薪械 邪褌褉褘屑谢褨胁邪械褑褑邪 泻邪褉褝泻褌薪邪 邪锌褉邪褑邪胁邪褑褜,\n"
-"褌邪屑褍 锌褉邪褑褟谐胁邪泄褑械 薪邪 褋胁邪褞 褉褘蟹褘泻褍."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "袣邪谢i 谢邪褋泻邪, 锌邪褔邪泻邪泄褑械"
+msgid "Printer"
+msgstr "袩褉褘薪褌褝褉"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "袨泻"
+msgid "Saudi Arabia"
+msgstr ""
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Finish"
-msgstr "肖i薪褋泻i"
+msgid "Internet"
+msgstr "褑i泻邪胁邪"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
-msgstr "袩褉芯褋褌褘械"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "袚械邪屑械褌褉褘褟: %s 褑褘谢i薪写褉邪褳, %s 谐邪谢芯胁邪泻, %s 褋械泻褌邪褉邪褳\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Restore From Tape"
+msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Modify"
-msgstr "袟屑褟薪i褑褜 RAID"
+msgid "Choose the profile to configure"
+msgstr "袗斜褟褉褘褑械 邪褋薪芯褳薪邪谐邪 泻邪褉褘褋褌邪谢褜薪i泻邪:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Add"
-msgstr "袛邪写邪褑褜"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
+msgid "Backup Now from configuration file"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Right \"Windows\" key"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "See hardware info"
+msgstr "袚谢. 邪锌i褋邪薪薪械 邪斜褋褌邪谢褟胁邪薪薪褟"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "袩械褉褕褘 褋械泻褌邪褉 蟹邪谐褉褍蟹邪褔薪邪谐邪 褉邪蟹写蟹械谢褍"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid "Printer manufacturer, model"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "PDQ - Print, Don't Queue"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "CapsLock key"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Right Alt key"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
msgstr ""
+"袛胁邪 泻褉褘褌褘褔薪褘褏 锌邪褉邪屑械褌褉褘 - 谐褝褌邪 褔邪褋褑褨薪褟 胁械褉褌褘泻邪谢褜薪邪泄 褉邪蟹谐芯褉褌泻i, 褑i\n"
+"褔邪褋褑褨薪褟 邪写薪邪褳谢械薪薪褟 褳褋褟谐芯 褝泻褉邪薪褍, 邪 褌邪泻褋邪屑邪 斜芯谢械泄 胁邪卸薪褘 锌邪褉邪屑械褌褉 -\n"
+"褔邪褋褑褨薪褟 谐邪褉褘蟹邪薪褌邪谢褜薪邪泄 褋i薪褏褉邪薪i蟹邪褑褘i 褉邪蟹谐芯褉褌泻i, 褑i 褔邪褋褑褨薪褟 胁褘胁邪写褍\n"
+"褉邪写泻芯褳 褝泻褉邪薪褍.\n"
+"\n"
+"袙袝袥鞋袦I 袙袗袞袧袗, 泻邪斜 邪斜褉邪薪褘 胁邪屑i 屑邪薪i褌芯褉 屑械褳 褔邪褋褑褨薪褞 褋i薪褏褉邪薪i蟹邪褑褘i, 褟泻邪褟\n"
+"薪械 锌械褉邪胁褘褕邪械 褎邪泻褌褘褔薪褘褟 屑邪谐褔褘屑邪褋褑i 胁邪褕邪谐邪 屑邪薪i褌芯褉褍: 褍 锌褉芯褑i谢械谐谢褘屑 胁褘锌邪写泻褍\n"
+"胁褘 屑芯卸邪褑械 褋邪锌褋邪胁邪褑褜 屑邪薪i褌芯褉.\n"
+"袣邪谢i 胁褘 褋褍屑薪褟胁邪械褑械褋褟, 邪斜褟褉褘褑械 泻邪薪褋械褉胁邪褌褘褳薪褘褟 薪邪褋褌褉芯泄泻i."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "袙褜械褌薪邪屑褋泻i \"薪褍屑邪褉 褉邪写泻邪\" QWERTY"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US 泻谢邪胁i褟褌褍褉邪 (屑i卸薪邪褉芯写薪邪褟)"
+msgid "Modify"
+msgstr "袟屑褟薪i褑褜 RAID"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US 泻谢邪胁i褟褌褍褉邪"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK 泻谢邪胁i褟褌褍褉邪"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "校泻褉邪i薪褋泻i"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "孝褍褉褝褑泻i (褋褍褔邪褋薪邪褟 \"Q\" 屑邪写褝谢褜)"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "孝褍褉褝褑泻i (褌褉邪写褘褑褘褢薪邪褟 \"F\" 屑邪写褝谢褜)"
+msgid "new"
+msgstr "薪芯胁褘"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "孝邪泄褋泻邪褟 泻谢邪胁i褟褌褍褉邪"
+msgid "Would you like to try again?"
+msgstr "袞邪写邪械褑械 薪邪褋褌褉芯i褑褜 锌褉褘薪褌褝褉?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "孝邪泄褋泻邪褟 泻谢邪胁i褟褌褍褉邪"
+msgid "Wizard"
+msgstr "袦邪泄褋褌邪褉 褋褌胁邪褉褝薪薪褟"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "袗褉屑褟薪褋泻i (typewriter)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Edit selected server"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (泻褨褉褘谢褨褑邪)"
+msgid "Please choose where you want to backup"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "小谢邪胁邪褑泻i (QWERTY)"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "袣邪斜 屑邪写褘褎i泻邪褑褘褟 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳 蟹写械泄褋薪i谢邪褋褟, 锌邪褌褉褝斜薪邪 锌械褉邪蟹邪谐褉褍蟹泻邪."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "小谢邪胁邪褑泻i (QWERTZ)"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Slovenian"
-msgstr "小谢邪胁械薪褋泻i"
+msgid "Please, choose your keyboard layout."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褌褘锌 泻谢邪胁i褟褌褍褉褘."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Swedish"
-msgstr "楔胁械褑泻i"
+msgid "Standard"
+msgstr "小褌邪薪写邪褉褌薪褘"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "袪褍褋泻i (携-袙-袝-袪-孝-袠)"
+msgid "Please choose your mouse type."
+msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Russian"
-msgstr "袪褍褋泻i"
+msgid "Connect..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "袪褍褋泻i (携-袙-袝-袪-孝-袠)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "袪褍褋泻i (携-袙-袝-袪-孝-袠)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
-msgstr "袣邪薪邪写褋泻i (袣胁械斜褝泻)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "袩邪褉褌褍谐邪谢褜褋泻i"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "袩芯谢褜褋泻i (qwertz 褉邪褋泻谢邪写泻邪)"
+msgid "not configured"
+msgstr "袧邪褋褌褉芯泄泻邪 X Window"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "袩芯谢褜褋泻i (褋褌邪薪写邪褉褌薪邪褟 褉邪褋泻谢邪写泻邪)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Norwegian"
-msgstr "袧邪褉胁械卸褋泻i"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "袗写屑褟薪i褑褜"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dutch"
-msgstr "袚邪谢邪薪写褋泻i"
+msgid "Proxies configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 proxy 泻褝褕褍褞褔褘褏 褋械褉胁械褉邪褳"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr ""
+msgid "Start: sector %s\n"
+msgstr "袩邪褔邪褌邪泻: 褋械泻褌邪褉 %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (泻褨褉褘谢褨褑邪)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr ""
+msgid "Network interface already configured"
+msgstr "袦邪薪i褌芯褉 锌邪泻褍谢褜 薪械 薪邪褋褌褉芯械薪褘"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Macedonian"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malayalam"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "袥i褌芯褳褋泻i \"褎邪薪械褌褘褔薪褘\" QWERTY"
+msgid "Mail Server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "袥i褌芯褳褋泻i \"薪褍屑邪褉 褉邪写泻邪\" QWERTY"
+msgid "Please click on a partition"
+msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "袥i褌芯褳褋泻i AZERTY (薪芯胁褘)"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "袥i褌芯褳褋泻i AZERTY (褋褌邪褉褘)"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+msgid "across Network"
+msgstr "小械褌泻邪:"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Latin American"
-msgstr "袥邪褑i薪邪-袗屑械褉褘泻邪薪褋泻i"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Korean keyboard"
-msgstr "UK 泻谢邪胁i褟褌褍褉邪"
+msgid "Upgrade %s"
+msgstr "袪邪蟹写蟹械谢 %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "携锌芯薪褋泻i 106 泻谢邪胁i褕"
+msgid "Select Printer Connection"
+msgstr "袙褘斜邪褉 褌褘锌褍 蟹谢褍褔褝薪薪褟 锌褉褘薪褌褝褉褍"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Inuktitut"
+msgid "Scanning for TV channels in progress ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "I褌邪谢褜褟薪褋泻i"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Icelandic"
-msgstr "I褋谢邪薪写褋泻i"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Iranian"
-msgstr "I褉邪薪褋泻i"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "I褳褉褘褌 (褎邪薪械褌褘褔薪褘)"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Israeli"
-msgstr "I褳褉褘褌"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"I薪褌褝褉薪褝褌 褋褍锌械褉褋械褉胁械褉-写褝屑邪薪 (蟹邪胁械褑褑邪 inetd) 蟹邪锌褍褋泻邪械 锌褉褘 褋褌邪褉褑械 \n"
+"泻芯谢褜泻邪褋褑褜 褉芯蟹薪褘褏 i薪褌褝褉薪褝褌 褋谢褍卸斜邪褳, 褟泻i褟 薪械邪斜褏芯写薪褘. 携谐芯 屑芯卸薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 "
+"写谢褟 锌褍褋泻褍\n"
+"褕屑邪褌谢褨泻褨褏 褋谢褍卸斜邪褳, 褍泻谢褞褔邪褞褔褘 telnet, ftp, rsh i rlogin. 袘谢邪泻褍褞褔褘 inetd, "
+"斜谢邪泻褍械屑\n"
+"褍褋械 褋谢褍卸斜褘, 蟹邪 褟泻i褟 褢薪 邪写泻邪蟹胁邪械."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Croatian"
-msgstr "啸邪褉胁邪褑泻i"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "袦邪写褜褟褉褋泻i"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Gurmukhi"
+msgid "Argentina"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "袚褉褝褔邪褋泻i"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "I屑褟 写邪屑械薪褍"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "袚褉褍蟹i薪褋泻i (\"袥邪褑i薪褋泻邪褟\" 褉邪褋泻谢邪写泻邪)"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "袚褉褍蟹i薪褋泻i (\"袪褍褋泻邪褟\" 褉邪褋泻谢邪写泻邪)"
+msgid "Mount points must begin with a leading /"
+msgstr "袩褍薪泻褌 屑邪薪褑i褉邪胁邪薪薪褟 锌邪胁i薪械薪 锌邪褔褘薪邪褑褑邪 蟹 /"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "肖褉邪薪褑褍蟹褋泻i"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "肖i薪褋泻i"
+msgid "Quit without saving"
+msgstr "袙褘泄褋褑i 斜械蟹 蟹邪褏邪胁邪薪薪褟"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Spanish"
-msgstr "I褋锌邪薪褋泻i"
+msgid "Yemen"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Estonian"
-msgstr "协褋褌芯薪褋泻i"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (袧邪褉胁械卸褋泻i)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Danish"
-msgstr "袛邪褑泻i"
+msgid "Hard drive detection"
+msgstr "袙褘蟹薪邪褔褝薪薪械 卸芯褉褋褌泻邪谐邪 写褘褋泻褍"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Devanagari"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "袧褟屑械褑泻i (薪褟屑邪 蟹邪斜谢邪泻i褉邪胁邪薪褘褏 泻谢邪胁i褕)"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "German"
-msgstr "袧褟屑械褑泻i"
+msgid "Tajikistan"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "效械褕褋泻i (QWERTY)"
+msgid "Accept"
+msgstr "袩褉褘薪褟褑褜"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "效械褕褋泻i (QWERTZ)"
+msgid "Description"
+msgstr "袗锌i褋邪薪薪械"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "楔胁械泄褑邪褉褋泻i (肖褉邪薪褑褍蟹褋泻邪褟 褉邪褋泻谢邪写泻邪)"
+msgid "Error opening %s for writing: %s"
+msgstr "袩邪屑褘谢泻邪 邪写泻褉褘褑褑褟 %s 写谢褟 蟹邪锌i褋褍: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "楔胁械泄褑邪褉褋泻i (袧褟屑械褑泻邪褟 褉邪褋泻谢邪写泻邪)"
+msgid "Mouse type: %s\n"
+msgstr "孝褘锌 屑褘褕褘: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "袘械谢邪褉褍褋泻褨"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"袙邪褕邪 胁i写褝邪泻邪褉褌邪 屑芯卸邪 屑械褑褜 3D-锌邪褋泻邪褉褝薪薪械, 褟泻芯械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 褌芯谢褜泻i XFree %"
+"s."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "协褋褌芯薪褋泻i"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褌褘锌 泻谢邪胁i褟褌褍褉褘."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "袘褉邪蟹i谢褜褋泻i (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "袘邪谢谐邪褉褋泻i"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "袗褉屑褟薪褋泻i (褎邪薪械褌褘褔薪褘)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "孝邪斜谢i褑邪"
+msgid "Expert Area"
+msgstr "协泻褋锌械褉褌"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Belgian"
-msgstr "袘械谢褜谐i泄褋泻i"
+msgid "Choose a monitor"
+msgstr "袗斜褟褉褘褑械 屑邪薪i褌芯褉"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (latin)"
+msgid "Empty label not allowed"
+msgstr "袩褍褋褌邪褟 屑械褌泻邪 薪械 写邪蟹胁邪谢褟械褑褑邪"
#: ../../keyboard.pm:1
#, c-format
-msgid "Arabic"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "袗褉屑褟薪褋泻i (褎邪薪械褌褘褔薪褘)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (typewriter)"
-msgstr "袗褉屑褟薪褋泻i (typewriter)"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "袗褉屑褟薪褋泻i (褋褌邪褉褘)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Albanian"
-msgstr "I褉邪薪褋泻i"
+msgid "I can't add any more partition"
+msgstr "袛邪写邪褑褜 褉邪蟹写蟹械谢 薪械屑邪谐褔褘屑邪"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "袩芯谢褜褋泻i"
+msgid "Size in MB: "
+msgstr "袩邪屑械褉 褍 袦斜:"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Remote printer"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "屑芯卸邪 斜褘褑褜"
+msgid "Please choose a language to use."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Zambia"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "South Africa"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"袦芯卸薪邪 薪邪褋褌褉芯i褑褜 褋i褋褌褝屑褍 写谢褟 邪褳褌邪屑邪褌褘褔薪邪谐邪 褳胁邪褏芯写褍 褳 褋i褋褌褝屑褍 写谢褟\n"
+"邪写薪邪谐芯 泻邪褉褘褋褌邪谢褜薪i泻邪. 袣邪谢i 袙褘 薪械 卸邪写邪械褑械 谐褝褌邪谐邪, 薪邪褑i褋薪i褑械 \"袗写屑械薪邪\"."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+msgid "Floppy format"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mayotte"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Yemen"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "袩褉褘薪褌褝褉"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Samoa"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wallis and Futuna"
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Vanuatu"
-msgstr ""
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "袩械褉褕褘 褋械泻褌邪褉 蟹邪谐褉褍蟹邪褔薪邪谐邪 褉邪蟹写蟹械谢褍"
-#: ../../lang.pm:1
-#, c-format
-msgid "Vietnam"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "袟谐邪褉薪褍褑褜 写褉褝胁邪"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Venezuela"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+msgid "Guam"
+msgstr "袟邪斜邪胁褘"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Uzbekistan"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Uruguay"
+msgid "/Options/Test"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
+"袚褝褌褘 褍蟹褉芯胁械薪褜 薪械邪斜褏芯写薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 蟹 邪褋褑褟褉芯谐邪泄. 小i褋褌褝屑邪 斜褍写蟹械 锌褉邪褋褑械泄\n"
+"褍 泻邪褉褘褋褌邪薪薪i, 邪谢械 i 斜芯谢褜褕 褔褍褌薪邪泄: 谐褝褌褘 褍蟹褉芯胁械薪褜 斜褟褋锌械泻i 薪械谢褜谐邪 "
+"胁褘泻邪褉褘褋褌芯褳胁邪褑褜\n"
+"薪邪 屑邪褕褘薪邪褏, 褟泻i褟 写邪谢褍褔邪薪褘 写邪 褋械褌泻i 褑i 写邪 Internet. 校胁邪褏芯写 薪械 邪斜邪褉芯薪械薪褘 "
+"锌邪褉芯谢械屑."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Uganda"
-msgstr "袗写泻邪褌"
+msgid "Mounting partition %s"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢褍 %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "User name"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Ukraine"
-msgstr "校泻褉邪i薪褋泻i"
+msgid "New configuration (isdn-light)"
+msgstr "袟薪芯泄写蟹械薪邪 褋褨褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻褨 (firewall)!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tanzania"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 DiskDrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "袩邪屑械褉褘 褟泻芯谐邪 褉邪蟹写蟹械谢邪 胁褘 卸邪写邪械褑械 蟹屑褟薪i褑褜?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "袧邪褋褌褉. 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳"
-#: ../../lang.pm:1
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "袩褉邪胁械褉泻邪 锌邪褉褌芯褳"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkey"
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr ""
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "袨锌褑褘i 褋芯泻械褌褍 锌褉褘薪褌褝褉褍"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "袗写褉邪褋褘 锌邪屑褟褑褨 泻邪褉褌褘 (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "East Timor"
-msgstr ""
+msgid "France"
+msgstr "肖褉邪薪褑褘褟"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tokelau"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tajikistan"
+msgid "Checking installed software..."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "袗写写邪谢械薪褘 胁褍蟹械谢"
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "袞邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 写褉褍泻?"
#: ../../lang.pm:1
#, c-format
-msgid "French Southern Territories"
+msgid "Turkey"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Chad"
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 泻薪芯锌泻i"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Swaziland"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "袙褜械褌薪邪屑褋泻i \"薪褍屑邪褉 褉邪写泻邪\" QWERTY"
-#: ../../lang.pm:1
-#, c-format
-msgid "Syria"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "El Salvador"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sao Tome and Principe"
+msgid "Hardware"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Somalia"
-msgstr "NIS Domain"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Senegal"
-msgstr "孝邪斜谢i褑邪"
-
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "San Marino"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Sierra Leone"
+msgid "United States"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "小谢邪胁械薪褋泻i"
+msgid "Default OS?"
+msgstr "袩邪 写邪屑邪褳谢械薪薪褞"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "小谢邪胁械薪褋泻i"
+msgid "Swiss (German layout)"
+msgstr "楔胁械泄褑邪褉褋泻i (袧褟屑械褑泻邪褟 褉邪褋泻谢邪写泻邪)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Saint Helena"
+msgid "Configure all heads independently"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Singapore"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "NTP Server"
+msgstr "NIS 褋械褉胁械褉:"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Seychelles"
-msgstr "袗斜邪谢芯薪泻邪:"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "Load/Save on floppy"
+msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Saudi Arabia"
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "袪褍褋泻i"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "NIS Domain"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+msgid "nice"
+msgstr "写芯斜褉邪"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Qatar"
-msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Palau"
-msgstr ""
+msgid "Leaving in %d seconds"
+msgstr "%d 褋械泻褍薪写邪褳"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Paraguay"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Portugal"
-msgstr "袩芯褉褌"
+msgid "Country"
+msgstr "袦邪薪褑i褉邪胁邪薪薪械"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+msgid "Property"
+msgstr "袩芯褉褌"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Puerto Rico"
+msgid "Ghostscript"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "袩褉褘薪褌褝褉"
+msgid "LAN Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "Ghana"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Poland"
-msgstr "I褋谢邪薪写褋泻i"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pakistan"
+msgid "Path or Module required"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Philippines"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Papua New Guinea"
+msgid "Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "French Polynesia"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Peru"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Panama"
-msgstr ""
+msgid "There was an error installing packages:"
+msgstr "袗褌褉褘屑邪谢邪褋褟 锌邪屑褘谢泻邪 褳锌邪褉邪写泻邪胁邪薪薪褟 锌邪泻械褌邪褳:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Oman"
-msgstr "NIS Domain"
+msgid "Lexmark inkjet configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New Zealand"
-msgstr ""
+msgid "Undo"
+msgstr "袗写泻邪褌"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Niue"
-msgstr "谐邪谢褜褕褌褍泻"
+msgid "Save partition table"
+msgstr "袟邪锌i褋 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Nauru"
-msgstr ""
+msgid "Finnish"
+msgstr "肖i薪褋泻i"
#: ../../lang.pm:1
#, c-format
-msgid "Nepal"
+msgid "Macedonia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Nicaragua"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr "小谢邪胁械薪褋泻i"
#: ../../lang.pm:1
#, c-format
-msgid "Norfolk Island"
+msgid "Libya"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "袙褘褋芯泻i"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "New Caledonia"
-msgstr ""
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "袣邪薪褎褨谐褍褉邪褑褘褟 褋褑褝薪邪褉邪褳, 褍褋褌邪谢褟胁邪薪薪械 袩袟, 蟹邪锌褍褋泻 褋谢褍卸斜邪褳..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mozambique"
-msgstr ""
+msgid "Table"
+msgstr "孝邪斜谢i褑邪"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Malaysia"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "袧械 胁械写邪褞 褟泻 邪写褎邪褉屑邪褌邪胁邪褑褜 %s 蟹 褌褘锌邪屑 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Mexico"
+msgid "Model"
msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../lang.pm:1
-#, c-format
-msgid "Malawi"
-msgstr ""
-
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Maldives"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Mauritius"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS 褋械褉胁械褉:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Malta"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Montserrat"
+msgid "Modem"
msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mauritania"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Martinique"
+msgid "Tuvalu"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Northern Mariana Islands"
+msgid "Use auto detection"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mongolia"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
+"GPM 写邪写邪械 锌邪写褌褉褘屑泻褍 屑褘褕褘 写邪 锌褉邪谐褉邪屑邪褳, 褟泻i褟 锌褉邪褑褍褞褑褜 褍 褌褝泻褋褌邪胁褘屑 褉褝卸褘屑械,\n"
+"褌邪泻i褏 褟泻 Midnight Commander. 袚褝褌邪 写邪蟹胁邪谢褟械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 屑褘褕 锌褉褘 "
+"泻邪锌i褉邪胁邪薪薪i i 褳褋褌邪褳褑褘,\n"
+"i 褳泻谢褞褔邪械 锌邪写褌褉褘屑泻褍 褳褋锌谢褘胁邪褞褔褘褏 (pop-up) 屑械薪褞 褳 褌褝泻褋褌邪胁褘屑 褉褝卸褘屑械."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Myanmar"
+msgid "Started on boot"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Mali"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Macedonia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Marshall Islands"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Madagascar"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Moldova"
+msgid "East Timor"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Monaco"
-msgstr "袦邪薪i褌芯褉"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Morocco"
+msgid "Del profile..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Libya"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Latvia"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+msgid "Installing Foomatic..."
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "袣邪谢i 谢邪褋泻邪, 胁褘泄写蟹i褑械, 邪 锌芯褌褘屑 褋泻邪褉褘褋褌邪泄褑械 Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
-#, c-format
-msgid "Lithuania"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Liberia"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+msgid "Package: "
+msgstr "袩邪泻械褌"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Sri Lanka"
+msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
+msgid "SECURITY WARNING!"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Lucia"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "写芯斜褉邪"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Lebanon"
+msgid "No, I don't want autologin"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Windows Migration tool"
+msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
+
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "袙褘斜邪褉 屑芯胁褘"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Testing your connection..."
+msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "锌邪屑械褉 斜谢芯泻褍"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Laos"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"袩邪褉芯谢褜 蟹邪褉邪蟹 褍泻谢褞褔邪薪褘, 邪谢械 胁褘泻邪褉褘褋褌邪薪薪械 泻邪屑锌'褞褌褝褉褍 褳 褟泻邪褋褑i 褋械褌泻邪胁邪谐邪\n"
+"褌邪泻褋邪屑邪 薪械 褉褝泻邪屑械薪写邪胁邪薪邪."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr ""
+msgid "Start sector: "
+msgstr "袩邪褔邪褌泻芯胁褘 褋械泻褌邪褉:"
#: ../../lang.pm:1
#, c-format
-msgid "Cayman Islands"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Kuwait"
-msgstr "袙褘褏邪写"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "袩械褉邪薪芯褋"
+msgid "Seychelles"
+msgstr "袗斜邪谢芯薪泻邪:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "袧褟屑邪 锌邪褉芯谢褞"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Comoros"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Kiribati"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Cambodia"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Kyrgyzstan"
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Kenya"
-msgstr "袣谢邪胁i褟褌褍褉邪"
+msgid "Romanian (qwerty)"
+msgstr "袪褍褋泻i (携-袙-袝-袪-孝-袠)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan"
+msgid "Under Devel ... please wait."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "I褉邪薪褋泻i"
-
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Jamaica"
+msgid "Czech Republic"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Iceland"
-msgstr "I褋谢邪薪写褋泻i"
+msgid "Egypt"
+msgstr "袩褍褋褌邪"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "I褉邪薪褋泻i"
+msgid "Old configuration (isdn4net)"
+msgstr "袟薪芯泄写蟹械薪邪 褋褨褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻褨 (firewall)!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Iraq"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Sound card"
+msgstr "小褌邪薪写邪褉褌薪褘"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢邪褳"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"袟邪褉邪蟹 胁褘 屑邪械褑械 褌芯谢褜泻i 邪写蟹i薪 胁褟谢i泻i 褉邪蟹写蟹械谢 FAT\n"
+"(褟泻褨 蟹胁褘褔邪泄薪邪 胁褘泻邪褉褘褋褌芯褳胁邪械 MS Dos/Windows).\n"
+"袩褉邪锌邪薪褍褞, 锌邪-锌械褉褕邪械, 蟹屑褟薪i褑褜 锌邪屑械褉褘 褉邪蟹写蟹械谢邪\n"
+"(泻谢i泻薪i褑械 薪邪 褟谐芯, 邪 锌芯褌褘屑 薪邪 \"蟹屑褟薪械薪薪械 锌邪屑械褉邪褳\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "Suppress Temporary Files"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "I褉邪薪褋泻i"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "I褳褉褘褌"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Change partition type"
+msgstr "袟屑褟薪i褑褜 褌褘锌 褉邪蟹写蟹械谢褍"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Ireland"
-msgstr "I褋谢邪薪写褋泻i"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Indonesia"
-msgstr "薪褟屑邪"
+msgid "Network Options"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Hungary"
-msgstr "袦邪写褜褟褉褋泻i"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Haiti"
+msgid "Statistics"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "Croatia"
-msgstr "啸邪褉胁邪褑泻i"
+msgid "(on %s)"
+msgstr "(屑芯写褍谢褜 %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Honduras"
+msgid "MM Series"
+msgstr "MM Series"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Heard and McDonald Islands"
+msgid "average"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
+
#: ../../lang.pm:1
#, c-format
-msgid "Hong Kong"
+msgid "Equatorial Guinea"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "China"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guyana"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guinea-Bissau"
+msgid "Currently, no alternative possibility is available"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Guam"
-msgstr "袟邪斜邪胁褘"
+msgid "Romanian (qwertz)"
+msgstr "袪褍褋泻i (携-袙-袝-袪-孝-袠)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "楔谢褞蟹"
+msgid "Write Config"
+msgstr "袧邪褋褌褉芯泄泻邪 X Window"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
msgstr ""
+"袛褝屑邪薪 屑邪褉褕褉褍褌褘蟹邪褑褘i 写邪蟹胁邪谢褟械 写褘薪邪屑i褔薪褘屑 褌邪斜谢i褑邪屑 IP 屑邪褉褕褉褍褌褘蟹邪褑褘i\n"
+"邪写薪邪褳谢褟褑褑邪 锌褉邪蟹 RIP 锌褉邪褌邪泻芯谢. RIP 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 褳 屑邪谢褘褏 褋械褌泻邪褏, 斜芯谢褜褕\n"
+"褋泻谢邪写邪薪褘褟 锌褉邪褌邪泻芯谢褘 屑邪褉褕褉褍褌褘蟹邪褑褘i - 褍 胁褟谢i泻i褏 褋械褌泻邪褏."
#: ../../lang.pm:1
#, c-format
-msgid "Equatorial Guinea"
+msgid "Kiribati"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Guadeloupe"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guinea"
-msgstr "袗谐褍谢褜薪褘"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Browse"
+msgstr "袩褉邪谐谢褟写"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Gambia"
+msgid "CDROM"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greenland"
-msgstr "I褋谢邪薪写褋泻i"
-
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr ""
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "笑i 卸邪写邪械褑械 蟹邪褉邪蟹 锌邪褋锌褉邪斜邪胁邪褑褜 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghana"
+msgid "Belgian"
+msgstr "袘械谢褜谐i泄褋泻i"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "笑i 褢褋褑褜 褍 胁邪褋 i薪褕褘?"
+
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
+"袧i 胁芯写薪褘 ethernet 褋械褌泻邪胁褘 邪写邪锌褌邪褉 褍 胁邪褕邪泄 褋i褋褌褝屑械 薪械 胁褘蟹薪邪褔邪薪褘. 袣邪谢i 谢邪褋泻邪, "
+"褋泻邪褉褘褋褌邪泄褑械 泻邪薪褎i谐褍褉邪褑褘泄薪褘 i薪褋褌褉褍屑褝薪褌."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "肖褉邪薪褑褍蟹褋泻i"
+msgid "Windows"
+msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, fuzzy, c-format
-msgid "Georgia"
-msgstr "袧邪褉胁械卸褋泻i"
+msgid "Can't make screenshots before partitioning"
+msgstr "袛邪写邪褑褜 褉邪蟹写蟹械谢 薪械屑邪谐褔褘屑邪"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "I屑褟 屑邪褕褘薪褘"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Grenada"
+msgid "/File/Save _As"
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United Kingdom"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gabon"
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Delay before booting default image"
+msgstr "袟邪褌褉褘屑泻邪 锌械褉邪写 蟹邪谐褉褍蟹泻邪泄 胁芯斜褉邪蟹褍 锌邪 写邪屑邪褳谢械薪薪褞"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Restrict command line options"
+msgstr "袗斜屑械卸邪胁邪薪薪械 芯锌褑褘褟褳 泻邪屑邪薪写薪邪谐邪 褉邪写泻邪"
+
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "I褋谢邪薪写褋泻i"
+msgid "East Europe"
+msgstr "袝褳褉芯锌邪"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Micronesia"
+msgid "Use free space"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use dhcp"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
+msgid "Mail alert"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Fiji"
-msgstr "肖i薪褋泻i"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Internet configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
#: ../../lang.pm:1
#, c-format
-msgid "Finland"
+msgid "Uzbekistan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "协褋褌芯薪褋泻i"
+msgid "Detected %s"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Spain"
-msgstr "I褋锌邪薪褋泻i"
+msgid "/Autodetect _printers"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "协泻褋锌械褉褌"
+msgid "Finish"
+msgstr "肖i薪褋泻i"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Western Sahara"
+msgid "Show automatically selected packages"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "袩褍褋褌邪"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "协褋褌芯薪褋泻i"
+#, c-format
+msgid "Togo"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ecuador"
+msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "16 MB"
+msgstr "16 袦斜"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr ""
+msgid "Please try again"
+msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Dominica"
-msgstr "NIS Domain"
+msgid "The model is correct"
+msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Denmark"
-msgstr ""
+msgid "FAT resizing failed: %s"
+msgstr "袗褳褌邪蟹屑褟薪械薪薪械 锌邪屑械褉邪褳 薪械 邪褌褉褘屑邪谢邪褋褟 写谢褟 褉邪蟹写蟹械谢褍 FAT %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Individual package selection"
+msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "袗写屑褟薪i褑褜"
+msgid "This partition is not resizeable"
+msgstr "袩邪屑械褉褘 褟泻芯谐邪 褉邪蟹写蟹械谢邪 胁褘 卸邪写邪械褑械 蟹屑褟薪i褑褜?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cyprus"
-msgstr ""
+msgid "Location"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Christmas Island"
+msgid "USA (cable-hrc)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "袟谐邪褉薪褍褑褜 写褉褝胁邪"
+msgid "Journalised FS"
+msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "楔谢褞蟹"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Cuba"
+msgid "This machine"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Colombia"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "袥i褌邪褉邪 写谢褟 DOS-写褘褋泻褍: %s (薪邪褳谐邪写)\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Cameroon"
+msgid "Bahrain"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Chile"
-msgstr "袩芯褉褌 屑褘褕褘"
+msgid "omit scsi modules"
+msgstr "袪褝卸褘屑 蟹谢褍褔褝薪薪褟"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cook Islands"
+msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Cote d'Ivoire"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Switzerland"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "孝褘锌 泻谢邪胁i褟褌褍褉褘: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Central African Republic"
+msgid "Maltese (US)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
+"袦邪薪褑i褉邪胁邪褑褜 i 褉邪蟹屑邪薪褑i褉邪胁邪褑褜 褍褋械 褋械褌泻邪胁褘褟 褎邪泄谢邪胁褘褟 褋i褋褌褝屑褘 (NFS),\n"
+" SMB (Lan Manager/Windows) i NCP (Netware) 锌褍薪泻褌褘 屑邪薪褑i褉邪胁邪薪薪褟."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid "Tvcard"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Canada"
-msgstr "袣邪薪邪写褋泻i (袣胁械斜褝泻)"
+msgid "Toggle between normal/expert mode"
+msgstr "袟胁褘褔邪泄薪褘 褉褝卸褘屑"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Belize"
-msgstr "袟屑褟薪械薪薪械 锌邪屑械褉邪褳"
+msgid "Size"
+msgstr "袩邪屑械褉: %s"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belarus"
-msgstr "袘械谢邪褉褍褋泻褨"
+#: ../../help.pm:1
+#, c-format
+msgid "GRUB"
+msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Botswana"
-msgstr "协褋褌芯薪褋泻i"
+msgid "Greenland"
+msgstr "I褋谢邪薪写褋泻i"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr ""
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bhutan"
+msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bahamas"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "袗斜褟褉褘褑械 褎邪泄谢"
+
+#: ../../help.pm:1
#, c-format
-msgid "Brazil"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr ""
+msgid "Which configuration of XFree do you want to have?"
+msgstr "携泻褍褞 泻邪薪褎i谐褍褉邪褑褘褞 XFree 胁褘 卸邪写邪械褑械 邪褌褉褘屑邪褑褜?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "袧褟屑械褑泻i"
+msgid "More"
+msgstr "袩械褉邪薪芯褋"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Benin"
-msgstr "袘械谢褜谐i泄褋泻i"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"袧邪 谐褝褌邪屑 褍蟹褉芯褳薪械 斜褟褋锌械泻i 屑邪谐褔褘屑邪 胁褘泻邪褉褘褋褌邪薪薪械 褋i褋褌褝屑褘 褳 褟泻邪褋褑i\n"
+"褋械褉胁械褉褍. 校蟹褉芯胁械薪褜 斜褟褋锌械泻i 写邪褋褌邪褌泻芯胁邪 胁褘褋芯泻i 写谢褟 褉邪斜芯褌褘\n"
+"褋械褉胁械褉褍, 褟泻i 写邪锌褍褋泻邪械 蟹谢褍褔褝薪薪i 褋邪 褕屑邪褌谢i泻i屑i 泻谢i械薪褌邪屑i."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Account Password"
+msgstr "袩邪褉芯谢褜 写谢褟 褳胁邪褏芯写褍"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bahrain"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "袦邪写褜褟褉褋泻i"
+msgid "Tajik keyboard"
+msgstr "孝邪泄褋泻邪褟 泻谢邪胁i褟褌褍褉邪"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Burkina Faso"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "袣褉芯锌泻邪 屑邪薪褑i褉邪胁邪薪薪褟"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Barbados"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "I褉邪薪褋泻i"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Select file"
+msgstr "袗斜褟褉褘褑械 褎邪泄谢"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
+msgid "Japan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS 褋械褉胁械褉"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands Antilles"
+msgid "NCP queue name missing!"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "袗褉屑褟薪褋泻i (褋褌邪褉褘)"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "I褉邪薪褋泻i"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom 锌邪蟹薪邪褔邪薪褘 \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Anguilla"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
+"袟邪褏邪胁邪褑褜 i 邪写薪邪胁i褑褜 褋i褋褌褝屑薪褘 褝薪褌褉邪锌i泄薪褘 锌褍谢 写谢褟 胁褘褋芯泻邪泄 褟泻邪褋褑i\n"
+"谐械薪械褉邪褑褘褨 胁褘锌邪写泻芯胁褘褏 谢褨泻邪褳."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Antigua and Barbuda"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "United Arab Emirates"
+msgid "Turn your computer into a reliable server"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Andorra"
-msgstr "袗写泻邪褌"
+msgid " (driver %s)"
+msgstr "小械褉胁械褉 XFree86: %s\n"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "I褉邪薪褋泻i"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr "肖邪泄谢(褘) 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘: %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "袦邪薪褑i褉邪胁邪薪薪械 写褘褋泻褍 %s\n"
+msgid "I don't know"
+msgstr "袧械 胁褟写芯屑邪"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "袪褍褕褑械 泻芯谢邪屑 屑褘褕褘!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "To activate the mouse,"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+msgid "Post Uninstall"
+msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "袧褟屑邪 屑褘褕褘"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "薪褟屑邪"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (泻褨褉褘谢褨褑邪)"
-#: ../../mouse.pm:1
-#, c-format
-msgid "3 buttons"
-msgstr "3 泻薪芯锌泻i"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Add a module"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 泻薪芯锌泻i"
+msgid "Profile to delete:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "1 button"
-msgstr "2 泻薪芯锌泻i"
+msgid "Local measure"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "busmouse"
msgstr "袧褟屑邪 屑褘褕褘"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "I屑褟 写谢褟 褳胁邪褏芯写褍 (i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (锌邪褋谢褟写芯褳薪邪褟, 褋褌邪褉褘 褌褘锌 C7)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "袘械谢褜谐i泄褋泻i"
+
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Uruguay"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Monitor: %s\n"
+msgstr "袦邪薪i褌芯褉: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "I屑褟 锌褉褘薪褌褝褉褍"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bangladesh"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "袟胁褘褔邪泄薪邪褟 屑褘褕 蟹 3 泻薪芯锌泻邪屑褨"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "袟胁褘褔邪泄薪邪褟 屑褘褕 蟹 2 泻薪芯锌泻邪屑褨"
+msgid "Initial tests"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "serial"
-msgstr "锌邪褋谢褟写芯褳薪邪褟"
+msgid "Continue"
+msgstr "袩褉邪褑褟谐薪褍褑褜"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Custom Restore"
+msgstr "袩邪 胁褘斜邪褉褍"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wheel"
-msgstr "袟 泻芯谢邪屑"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Generic"
-msgstr "袗谐褍谢褜薪褘"
+msgid "Script-based"
+msgstr "薪邪 邪褋薪芯胁械 褋泻褉褘锌褌褍"
-#: ../../mouse.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Error reading file %s"
+msgstr "袩邪屑褘谢泻邪 褔褘褌邪薪薪褟 褎邪泄谢褍 %s"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "褎邪褉屑邪褌邪胁邪薪薪械"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, fuzzy, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "袟胁褘褔邪泄薪邪褟 屑褘褕 蟹 2 泻薪芯锌泻邪屑褨"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "袙褘 锌邪胁i薪薪褘 屑械褑褜 褉邪蟹写蟹械谢 swap"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid " on "
+msgstr ""
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Standard"
-msgstr "小褌邪薪写邪褉褌薪褘"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - 袦褘褕"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "袩械褉邪泻谢褞褔褝薪薪械 锌邪屑i卸 褍锌邪褉邪写泻邪胁邪薪薪械屑 锌邪 谐褉褍锌械 i 邪褋芯斜泻邪褏"
+msgid "Other OS (SunOS...)"
+msgstr "I薪褕邪褟 袗小 (SunOS,...)"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "袟谐邪褉薪褍褑褜 写褉褝胁邪"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "校褋褌邪谢褢褳泻邪"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "袪邪蟹谐邪褉薪褍褑褜 写褉褝胁邪"
+msgid "%d packages"
+msgstr "%d 锌邪泻械褌邪褳"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Info"
-msgstr "I薪褎邪褉屑邪褑褘褟"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../my_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid ""
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "袩邪屑褘谢泻邪 蟹邪锌i褋褍 褳 褎邪泄谢 %s"
+msgid "Costa Rica"
+msgstr ""
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "袗斜褟褉褘褑械 写邪写邪褌泻芯胁褘褟 薪邪褋褌褉芯泄泻i 写谢褟 褋械褉胁械褉邪"
-#: ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢邪 %s 薪械 邪褌褉褘屑邪谢邪褋褟: %s"
+msgid "Icelandic"
+msgstr "I褋谢邪薪写褋泻i"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
msgstr ""
-"袙褘 屑邪械褑械 写蟹i褉泻褍 褳 褌邪斜谢i褑褘 褉邪写蟹械谢邪褳, 邪谢械 褟 薪械 屑邪褞 屑邪谐褔褘屑邪褋褑i 褟械 褋泻邪褉褘褋褌邪褑褜.\n"
-"袗写蟹i薪褘 胁褘褏邪写 褍 褌褘屑, 泻邪斜 锌械褉邪屑褟褋褑i褑褜 锌械褉褕邪褋薪褘褟 褉邪蟹写蟹械谢褘 褌邪泻, 泻邪斜 写蟹i褉泻邪 i褕谢邪\n"
-"邪写褉邪蟹褍 蟹邪 锌邪褕褘褉邪薪褘屑 (extended) 褉邪蟹写蟹械谢邪屑"
-#: ../../partition_table.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "袩邪褕褘褉邪薪褘 褉邪蟹写蟹械谢 薪械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 谐褝褌邪泄 锌谢邪褌褎芯褉屑邪泄"
+msgid "Please relog into %s to activate the changes"
+msgstr "袣邪谢i 谢邪褋泻邪, 锌械褉邪泄写蟹i褑械 褳 %s 写谢褟 邪泻褌褘胁邪褑褘i 蟹屑褟薪械薪薪褟褳"
-#: ../../partition_table.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟: "
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "屑芯卸邪 斜褘褑褜"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Lilo/grub mode"
+msgstr "袪褝卸褘屑 蟹谢褍褔褝薪薪褟"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "nice"
-msgstr "写芯斜褉邪"
+msgid "Output"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "very nice"
-msgstr "胁械谢褜屑i 写芯斜褉邪"
+msgid "Circular mounts %s\n"
+msgstr "袦邪薪褑i褉邪胁邪薪薪械 写褘褋泻褍 %s\n"
-#: ../../pkgs.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "important"
-msgstr "胁邪卸薪邪"
+msgid "Martinique"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "must have"
-msgstr "锌邪胁i薪薪褘 屑械褑褜"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../raid.pm:1
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "袧械写邪褋褌邪褌泻芯胁邪 褉邪蟹写蟹械谢邪褳 写谢褟 RAID 褍蟹褉芯褳薪褟 %d\n"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "a number"
+msgstr "袧褍屑邪褉 褌褝谢械褎芯薪褍"
-#: ../../raid.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid 薪械 锌褉邪褑邪蟹写芯谢褜薪褘"
+msgid "Swedish"
+msgstr "楔胁械褑泻i"
-#: ../../raid.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid 薪械 锌褉邪褑邪蟹写芯谢褜薪褘 (屑芯卸邪 raid 锌褉褘谢邪写褘 邪写褋褍褌薪i褔邪褞褑褜?)"
+msgid "Which %s driver should I try?"
+msgstr "携泻i 写褉邪泄胁械褉 %s 锌邪褋锌褉邪斜邪胁邪褑褜?"
-#: ../../raid.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "袧械 邪褌褉褘屑谢i胁邪械褑褑邪 写邪写邪褑褜 褉邪蟹写蟹械谢 薪邪 _邪写褎邪褉屑邪褑i褉邪胁邪薪褘_ RAID md%d"
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "小械泻褌邪褉"
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "On boot"
-msgstr "Yaboot"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Filesystem types:"
+msgstr "孝褘锌褘 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Services and deamons"
+msgid "Northern Mariana Islands"
msgstr ""
-#: ../../services.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "none"
+msgstr "薪褟屑邪"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "stopped"
-msgstr "袛邪谢褍褔褘褑褜"
+msgid "user :"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "running"
-msgstr "校胁邪谐邪!"
+msgid "Please enter your password"
+msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "袗斜褟褉褘褑械, 褟泻i褟 褋械褉胁i褋褘 蟹邪锌褍褋泻邪褑褜 邪褳褌邪屑邪褌褘褔薪邪 锌褉褘 蟹邪谐褉褍蟹褑褘"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+msgid "Floppy"
+msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "袨锌褑褘i 邪写写邪谢械薪邪谐邪 锌褉褘薪褌褝褉褍 lpd"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "File sharing"
+msgid "Ghostscript referencing"
msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Internet"
-msgstr "褑i泻邪胁邪"
+msgid "Bootloader"
+msgstr "袚邪谢芯褳薪褘褟 芯锌褑褘i 锌邪褔邪褌泻芯胁邪谐邪 蟹邪谐褉褍蟹褔褘泻褍"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Printing"
-msgstr "袩褉褘薪褌褝褉"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move"
+msgstr "袩械褉邪薪芯褋"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "袟邪锌褍褋泻邪械 i 锌褉褘锌褘薪褟械 X Font Server 锌褉褘 蟹邪谐褉褍蟹褑褘 i 胁褘泻谢褞褔褝薪薪i."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
+msgid "Bootloader to use"
+msgstr "袚邪谢芯褳薪褘褟 芯锌褑褘i 锌邪褔邪褌泻芯胁邪谐邪 蟹邪谐褉褍蟹褔褘泻褍"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog - 谐褝褌邪 褋褉芯写邪泻, 蟹 写邪锌邪屑芯谐邪泄 褟泻芯谐邪 屑薪芯谐i褟 写褝屑邪薪褘 蟹邪锌i褋胁邪褞褑褜 "
-"锌邪胁械写邪屑谢械薪薪i\n"
-"褳 褉芯蟹薪褘褟 褎邪泄谢褘 褋褌邪褌褘褋褌褘泻i. 袚褝褌邪 胁械谢褜屑i 写芯斜褉邪 写谢褟 邪谐谢褟写褍 锌褉邪褑褘 褉芯蟹薪褘褏 褋谢褍卸斜邪褳."
+msgid "SMB server host"
+msgstr "I屑褟 褋械褉胁械褉褍 SMB"
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS 褋械褉胁械褉:"
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"袩褉邪褌邪泻芯谢 rwho 写邪械 屑邪谐褔褘屑邪褋褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪屑 邪褌褉褘屑邪褑褜 褋锌i褋 褳褋i褏\n"
-"泻邪褉褘褋褌邪谢褜薪i泻邪褳, 褍胁邪泄褕芯褳褕褘褏 薪邪 屑邪褕褘薪褍, 胁褘泻邪薪邪褳 rwho 写褝屑邪薪 (锌邪写芯斜薪褘 薪邪 finger)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"袩褉邪褌邪泻芯谢 rusers 写邪蟹胁邪谢褟械 泻邪褉褘褋褌邪谢褜薪i泻邪屑 褋械褌泻i 胁褘蟹薪邪褔邪褑褜, 褏褌芯\n"
-"褳胁邪泄褕芯褳 i 锌褉邪褑褍械 薪邪 屑邪褕褘薪邪褏 褳 褋械褌褑褘."
#: ../../services.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"袩褉邪褌邪泻芯谢 rstat 写邪蟹胁邪谢褟械 泻邪褉褘褋褌邪谢褜薪i泻邪屑 褋械褌泻i 邪褌褉褘屑谢i胁邪褑褜\n"
-"锌邪屑械褉褘 薪邪谐褉褍蟹泻i 写谢褟 泻芯卸薪邪泄 屑邪褕褘薪褘 褋械褌泻i."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"袛褝屑邪薪 屑邪褉褕褉褍褌褘蟹邪褑褘i 写邪蟹胁邪谢褟械 写褘薪邪屑i褔薪褘屑 褌邪斜谢i褑邪屑 IP 屑邪褉褕褉褍褌褘蟹邪褑褘i\n"
-"邪写薪邪褳谢褟褑褑邪 锌褉邪蟹 RIP 锌褉邪褌邪泻芯谢. RIP 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 褳 屑邪谢褘褏 褋械褌泻邪褏, 斜芯谢褜褕\n"
-"褋泻谢邪写邪薪褘褟 锌褉邪褌邪泻芯谢褘 屑邪褉褕褉褍褌褘蟹邪褑褘i - 褍 胁褟谢i泻i褏 褋械褌泻邪褏."
+msgid "4 billion colors (32 bits)"
+msgstr "4 屑i谢i褟褉写邪 泻芯谢械褉邪褳 (24 斜i褌褘)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+msgid "Micronesia"
msgstr ""
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"袟邪褏邪胁邪褑褜 i 邪写薪邪胁i褑褜 褋i褋褌褝屑薪褘 褝薪褌褉邪锌i泄薪褘 锌褍谢 写谢褟 胁褘褋芯泻邪泄 褟泻邪褋褑i\n"
-"谐械薪械褉邪褑褘褨 胁褘锌邪写泻芯胁褘褏 谢褨泻邪褳."
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "License"
msgstr ""
-"Postfix - 谐褝褌邪 锌邪褕褌芯胁褘 褌褉邪薪褋锌邪褉褌薪褘 邪谐械薪褌, 锌褉邪谐褉邪屑邪, 褟泻邪褟\n"
-"锌械褉邪屑褟褕褔邪械 锌芯褕褌褍 蟹 邪写薪芯泄 屑邪褕褘薪褘 薪邪 泄薪褕褍褞."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"Portmapper (邪谐谢褟写邪谢褜薪i泻 锌邪褉褌芯褳) 泻i褉褍械 RPC 蟹谢褍褔褝薪薪褟屑i, 褟泻i褟 蟹胁褘褔邪泄薪邪\n"
-"胁褘泻邪褉褘褋褌芯褳胁邪褞褑褑邪 褌邪泻i屑i 锌褉邪褌邪泻芯谢邪屑i 褟泻 NFS i NIS. Portmap 褋械褉胁械褉 锌邪胁i薪械薪 "
-"胁褘泻芯薪胁邪褑褑邪\n"
-"薪邪 屑邪褕褘薪邪褏 褟泻i褟 锌褉邪褑褍褞褑褜 褟泻 褋械褉胁械褉褘 写谢褟 锌褉邪褌邪泻芯谢邪褳, 褟泻i褟 褋泻邪褉褘褋褌芯褳胁邪褞褑褜 RPC."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-"袩邪写褌褉褘屑泻邪 PCMCIA - 谐褝褌邪 蟹胁褘褔邪泄薪邪 锌邪写褌褉褘屑泻邪 褌邪泻i褏 褉褝褔邪褳, 褟泻 Ethernet i\n"
-"屑邪写褝屑褘 褳 薪邪褳褌斜褍泻邪褏. 袙邪屑 薪褟屑邪 薪械邪斜褏芯写薪邪褋褑i 泻邪薪褎i谐褍褉邪胁邪褑褜 i褏, 泻邪谢i 薪邪 胁邪褕邪泄\n"
-"屑邪褕褘薪械 i褏 薪褟屑邪, 褑i 褟薪邪 薪械 薪邪褳褌斜褍泻."
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
+"袩邪屑褘谢泻邪: 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳 薪械 蟹薪邪泄写蟹械薪褘 邪写锌邪胁械写薪褘褟 \n"
+"锌褉褘谢邪写褘. 袩褉邪胁械褉褑械 邪斜褋褌邪谢褟胁邪薪薪械 写谢褟 锌芯褕褍泻褍 i屑邪胁械褉薪邪泄 锌褉褘褔褘薪褘."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - 谐褝褌邪 胁褟写芯屑褘 锌褉邪褌邪泻芯谢 写谢褟 写芯褋褌褍锌褍 写邪 褎邪泄谢邪褳 锌褉邪蟹 TCP/IP\n"
-"褋械褌泻i. 袚褝褌邪褟 褋谢褍卸斜邪 褳锌谢褘胁邪械 薪邪 薪邪褟褳薪邪褋褑褜 褋褍胁褟蟹i 锌邪屑i卸 NFS 褎邪泄谢邪屑i."
+msgid "Do you want to start the connection at boot?"
+msgstr "袙褘 卸邪写邪械褑械, 泻邪斜 谐褝褌邪械 蟹谢褍褔褝薪薪械 褋褌邪褉褌邪胁邪谢邪 锌褉褘 蟹邪谐褉褍蟹褑褘?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Processor ID"
msgstr ""
-"NFS - 谐褝褌邪 胁褟写芯屑褘 锌褉邪褌邪泻芯谢 写谢褟 写芯褋褌褍锌褍 写邪 褎邪泄谢邪褳 锌褉邪蟹 TCP/IP 褋械褌泻i.\n"
-"袚褝褌邪褟 褋谢褍卸斜邪 蟹邪斜褟褋锌械褔胁邪械褑褑邪 NFS 褋械褉胁械褉邪屑, 褟泻i 泻邪薪褎i谐褍褉褘褉褍械褑邪 锌褉邪蟹\n"
-"/etc/exports 褎邪泄谢."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Sound trouble shooting"
msgstr ""
-"袗泻褌褘胁i蟹邪胁邪褑褜/写褝邪泻褌褘胁i蟹邪胁邪褑褜 褍褋械 褋械褌泻邪胁褘褟 i薪褌褝褉褎械泄褋褘, 褋泻邪薪褎i谐褍褉邪胁邪薪褘褟 写谢褟\n"
-"褋褌邪褉褌褍 锌褉褘 蟹邪谐褉褍蟹褑褘 褋i褋褌褝屑褘."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"袦邪薪褑i褉邪胁邪褑褜 i 褉邪蟹屑邪薪褑i褉邪胁邪褑褜 褍褋械 褋械褌泻邪胁褘褟 褎邪泄谢邪胁褘褟 褋i褋褌褝屑褘 (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) 锌褍薪泻褌褘 屑邪薪褑i褉邪胁邪薪薪褟."
+msgid "Polish (qwerty layout)"
+msgstr "袩芯谢褜褋泻i (褋褌邪薪写邪褉褌薪邪褟 褉邪褋泻谢邪写泻邪)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - 谐褝褌邪 褋械褉胁械褉 写邪屑械薪薪褘褏 i屑褢薪邪褳, 褟泻i 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 写谢褟\n"
-"锌械褉邪泻谢邪写邪薪薪褟 i屑褢薪 胁褍蟹谢芯褳 褍 IP 邪写褉邪褋褘."
+msgid "activate now"
+msgstr "袗泻褌褘褳薪褘"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"lpd - 谐褝褌褘 写褝屑邪薪 写褉褍泻褍, 锌邪褌褉褝斜薪褘 写谢褟 泻邪褉褝泻褌薪邪泄 锌褉邪褑褘 lpr. 袚褝褌邪\n"
-"褋械褉胁械褉, 褟泻i 泻i褉褍械 锌褉邪褑邪泄 锌褉褘薪褌褝褉褍(邪褳)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Host \"%s\", port %s"
msgstr ""
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
+msgid "This partition can't be used for loopback"
+msgstr "袚褝褌褘 褉邪蟹写蟹械谢 薪械 屑芯卸邪 斜褘褑褜 胁褘泻邪褉褘褋褌邪薪褘 锌邪写 胁i褉褌褍邪谢褜薪褍褞 褎邪泄谢邪胁褍褞 褋i褋褌褝屑褍"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
+msgid "File already exists. Use it?"
+msgstr "肖邪泄谢 褍卸芯 i褋薪褍械. 袙褘泻邪褉褘褋褌邪褑褜 褟谐芯?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "received: "
msgstr ""
-"袚褝褌褘 锌邪泻械褌 蟹邪谐褉褍卸邪械 邪斜褉邪薪褍褞 褉邪褋泻谢邪写泻褍 泻谢邪胁i褟褌褍褉褘 褟泻 薪邪斜芯褉 蟹\n"
-"/etc/sysconfig/keyboard. 衼薪邪 屑芯卸邪 斜褘褑褜 邪斜褉邪薪邪 褌邪泻褋邪屑邪 蟹 写邪锌邪屑芯谐邪泄 "
-"kbdconfig.\n"
-"袙褘 屑芯卸邪褑械 蟹褉邪斜i褑褜 写邪褋褌褍锌薪邪泄 褟械 写谢褟 褕屑邪褌谢褨泻褨褏 屑邪褕褘薪邪褳."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Right Alt key"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"I薪褌褝褉薪褝褌 褋褍锌械褉褋械褉胁械褉-写褝屑邪薪 (蟹邪胁械褑褑邪 inetd) 蟹邪锌褍褋泻邪械 锌褉褘 褋褌邪褉褑械 \n"
-"泻芯谢褜泻邪褋褑褜 褉芯蟹薪褘褏 i薪褌褝褉薪褝褌 褋谢褍卸斜邪褳, 褟泻i褟 薪械邪斜褏芯写薪褘. 携谐芯 屑芯卸薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 "
-"写谢褟 锌褍褋泻褍\n"
-"褕屑邪褌谢褨泻褨褏 褋谢褍卸斜邪褳, 褍泻谢褞褔邪褞褔褘 telnet, ftp, rsh i rlogin. 袘谢邪泻褍褞褔褘 inetd, "
-"斜谢邪泻褍械屑\n"
-"褍褋械 褋谢褍卸斜褘, 蟹邪 褟泻i褟 褢薪 邪写泻邪蟹胁邪械."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - 谐褝褌邪 World Wide Web 褋械褉胁械褉. 衼薪 胁褘泻邪褉褘褋褌芯褳蟹胁邪械褑邪 写谢褟 邪斜褋谢褍谐芯褳胁邪薪薪褟\n"
-"HTML 褎邪泄谢邪褳 i CGI."
+msgid "Gateway"
+msgstr "楔谢褞蟹"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "袩褉褘薪褌褝褉"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid "Tonga"
msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "Tunisia"
msgstr ""
-"GPM 写邪写邪械 锌邪写褌褉褘屑泻褍 屑褘褕褘 写邪 锌褉邪谐褉邪屑邪褳, 褟泻i褟 锌褉邪褑褍褞褑褜 褍 褌褝泻褋褌邪胁褘屑 褉褝卸褘屑械,\n"
-"褌邪泻i褏 褟泻 Midnight Commander. 袚褝褌邪 写邪蟹胁邪谢褟械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 屑褘褕 锌褉褘 "
-"泻邪锌i褉邪胁邪薪薪i i 褳褋褌邪褳褑褘,\n"
-"i 褳泻谢褞褔邪械 锌邪写褌褉褘屑泻褍 褳褋锌谢褘胁邪褞褔褘褏 (pop-up) 屑械薪褞 褳 褌褝泻褋褌邪胁褘屑 褉褝卸褘屑械."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Profile: "
+msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟: "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron - 褋褌邪薪写邪褉褌薪邪褟 UNIX 锌褉邪谐褉邪屑邪, 褟泻邪褟 胁褘泻芯薪胁邪械 锌褉邪谐褉邪屑褘 泻邪褉褘褋褌邪谢褜薪i泻邪\n"
-"锌褉邪蟹 锌邪蟹薪邪褔邪薪褘褟 锌械褉褘褟写褘 褔邪褋褍. Vixie cron 写邪写邪械 褉邪写 写邪锌邪褳薪械薪薪褟褳 写邪 "
-"褋褌邪薪写邪褉褌薪邪谐邪\n"
-"UNIX cron, 褍泻谢褞褔邪褞褔褘 谢械锌褕褘 褳蟹褉芯胁械薪褜 斜褟褋锌械泻i i 屑芯褑薪褘褟 泻邪薪褎i谐褍褉邪褑褘泄薪褘褟 芯锌褑褘i."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-"袣邪屑邪薪写褘, 褟泻i褟 胁褘泻芯薪胁邪褞褑褑邪, 褎i泻褋褍褞褑褑邪 锌邪 泻邪屑邪薪写蟹械 i 褔邪褋械 褟械 胁褘泻邪薪邪薪薪褟\n"
-"i 胁褘泻芯薪胁邪褞褑褑邪 谐褉褍锌褘 泻邪屑邪薪写, 泻邪谢i 蟹邪谐褉褍蟹泻邪 锌邪屑褟褑i 薪i卸褝泄 写邪褋褌邪褌泻芯胁邪泄."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"ampd 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 写谢褟 邪写褋谢械卸胁邪薪薪褟 褋褌邪褌褍褋褍 斜邪褌邪褉褝i i 胁褟写蟹械薪薪褟 "
-"褋褌邪褌褘褋褌褘泻i.\n"
-"携谐芯 屑芯卸薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 胁褘泻谢褞褔褝薪薪褟 屑邪褕褘薪褘 锌褉褘 薪i蟹泻i屑 蟹邪褉邪写蟹械 斜邪褌邪褉褝i."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, 锌械褉褘褟写褘褔薪褘 泻邪屑邪薪写薪褘 锌谢邪薪邪胁邪谢褜薪i泻."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "old static device name used in dev package"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr "袚褝褌邪褟 屑械褌泻邪 褳卸芯 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "校褋械 写邪写蟹械薪褘械 褳 褉邪蟹写蟹械谢械 %s 斜褍写褍褑褜 褋褌褉邪褔邪薪褘 锌邪褋谢褟 褎邪褉屑邪褌邪胁邪薪薪褟"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "select perm file to see/edit"
msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"袟屑褟薪i褑械 胁邪褕 Cd-Rom!\n"
+"\n"
+"袣邪谢i 谢邪褋泻邪, 褍褋褌邪褳褑械 Cd-Rom, 锌邪蟹薪邪褔邪薪褘 \"%s\", 褍 胁邪褕 写褘褋泻邪胁芯写 i 薪邪褑i褋薪i褑械 O泻 "
+"锌邪褋谢褟.\n"
+"袣邪谢i 胁褘 薪械 屑邪械褑械 褟谐芯, 薪邪褑i褋薪i褑械 袗写屑褟薪i褑褜, 泻邪斜 邪写屑褟薪i褑褜 褍褋褌邪谢褟胁邪薪薪械 蟹 谐褝褌邪谐邪 "
+"Cd."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Use group id for execution"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "袗斜褟褉褘褑械 邪褋薪芯褳薪邪谐邪 泻邪褉褘褋褌邪谢褜薪i泻邪:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Gabon"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "袣谢邪胁i褟褌褍褉邪"
-
-#: ../../standalone.pm:1
-#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"袗写写邪谢械薪褘 CUPS 褋械褉胁械褉 薪械 锌邪褌褉邪斜褍械 邪写 袙邪褋 薪邪褋褌褉芯泄泻褨 锌褉褘薪褌褝褉褍\n"
+"薪邪 谐褝褌邪泄 屑邪褕褘薪械, 褢薪 斜褍写蟹械 蟹薪芯泄写蟹械薪褘 邪褳褌邪屑邪褌褘褔薪邪.\n"
+"袣邪谢褨 袙褘 薪械 褳锌褝褳薪械薪褘, 邪斜褟褉褘褑械 \"袗写写邪谢械薪褘 褋械褉胁械褉 CUPS\"."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "袙褘 屑芯卸邪褑械 邪斜褉邪褑褜 褨薪褕褘褟 屑芯胁褘, 褟泻i褟 斜褍写褍褑褜 写邪褋褌褍锌薪褘 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS Domain"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "袩邪蟹薪邪褔褑械 写邪泻谢邪写薪褘 锌邪屑械褉 RAM (蟹薪芯泄写蟹械薪邪 %d M斜)"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
-
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 锌褉邪胁邪泄写邪褉褍"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure services"
-msgstr "袧邪褋褌褉芯泄泻邪 褋谢褍卸斜邪褳"
+msgid "Boot device"
+msgstr "袟邪谐褉褍蟹邪褔薪邪褟 锌褉褘谢邪写邪"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "袧邪褋褌褉芯泄泻邪 X Window"
+msgid "Which partition do you want to resize?"
+msgstr "袩邪屑械褉褘 褟泻芯谐邪 褉邪蟹写蟹械谢邪 胁褘 卸邪写邪械褑械 蟹屑褟薪i褑褜?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "校褋褌邪谢褟胁邪薪薪械 蟹邪谐褉褍蟹褔褘泻褍"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
+msgid "A tool to monitor your logs"
+msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Add a user"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "袗写屑褟薪i褑褜"
-#: ../../steps.pm:1
-#, c-format
-msgid "Root password"
-msgstr "袩邪褉芯谢褜 写谢褟 root"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected on port %s"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Install system"
-msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
+msgid "LPD"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳"
+msgid "Graphics card: %s\n"
+msgstr "袙i写褝邪泻邪褉褌邪: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢邪褳"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "袩褉褘薪褌褝褉"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "袙褘斜邪褉 泻谢邪胁i褟褌褍褉褘"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "袣谢邪褋 褍褋褌邪谢褟胁邪薪薪褟"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "袙褘蟹薪邪褔褝薪薪械 卸芯褉褋褌泻邪谐邪 写褘褋泻褍"
+msgid "Extended partition not supported on this platform"
+msgstr "袩邪褕褘褉邪薪褘 褉邪蟹写蟹械谢 薪械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 谐褝褌邪泄 锌谢邪褌褎芯褉屑邪泄"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "袧邪褋褌褉芯泄泻邪 屑褘褕褘"
+msgid "ISDN Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
-#: ../../steps.pm:1
-#, c-format
-msgid "License"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "袙褘褋芯泻i"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Language"
-msgstr "袙褘斜邪褉 屑芯胁褘"
+msgid "Internet Connection Sharing"
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
-#: ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "utopia 25"
+msgid "Choose file"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "OK"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
+"校胁邪谐邪! 袟薪芯泄写蟹械薪邪 褨褋薪褍褞褔邪褟 褋i褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻i (firewall). 袙邪屑 屑邪谐褔褘屑邪 "
+"褋锌邪褌褉褝斜褨褑褑邪 褋泻邪褉褝泻褌邪胁邪褑褜 褟械 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟."
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
-#, c-format
-msgid "logdrake"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic PS2 Wheel Mouse"
+msgstr "袟胁褘褔邪泄薪邪褟 屑褘褕 蟹 2 泻薪芯锌泻邪屑褨"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
+msgid "French Southern Territories"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
msgstr ""
-"袙邪褕邪 胁i写褝邪泻邪褉褌邪 屑芯卸邪 屑械褑褜 3D-锌邪褋泻邪褉褝薪薪械, 褟泻芯械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 褌芯谢褜泻i XFree %"
-"s.\n"
-"袦袗袡笑袝 袧袗 袔袙袗袟袝, 楔孝袨 袚协孝袗 协袣小袩袝袪蝎袦袝袧孝袗袥鞋袧袗携 袩袗袛孝袪蝎袦袣袗 I 袦袨袞袗 袩袪蝎袙袝小笑I 袛袗\n"
-"袟袗袙I小袗袧袧携 袙袗楔袗袚袗 袣袗袦袩'挟孝协袪校."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 蟹 褝泻褋锌械褉褘屑械薪褌邪谢褜薪邪泄 锌邪写褌褉褘屑泻邪泄 3D-锌邪褋泻邪褉褝薪薪褟"
+msgid "All data on this partition should be backed-up"
+msgstr "校褋械 写邪写蟹械薪褘褟 褳 谐褝褌褘屑 褉邪蟹写蟹械谢械 锌邪胁i薪薪褘 斜褘褑褜 蟹邪褉褏i胁邪胁邪薪褘褟"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"袙邪褕邪 胁i写褝邪泻邪褉褌邪 屑芯卸邪 屑械褑褜 3D-锌邪褋泻邪褉褝薪薪械, 褟泻芯械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 褌芯谢褜泻i XFree %"
-"s."
+msgid "Installing package %s"
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 蟹 锌邪写褌褉褘屑泻邪泄 3D-锌邪褋泻邪褉褝薪薪褟"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"袙邪褕邪 胁i写褝邪泻邪褉褌邪 屑芯卸邪 屑械褑褜 3D-锌邪褋泻邪褉褝薪薪械, 褟泻芯械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 褌芯谢褜泻i XFree %"
-"s.\n"
-"袦袗袡笑袝 袧袗 袔袙袗袟袝, 楔孝袨 袚协孝袗 协袣小袩袝袪蝎袦袝袧孝袗袥鞋袧袗携 袩袗袛孝袪蝎袦袣袗 I 袦袨袞袗 袩袪蝎袙袝小笑I 袛袗\n"
-"袟袗袙I小袗袧袧携 袙袗楔袗袚袗 袣袗袦袩'挟孝协袪校. 袙邪褕邪 胁i写褝邪泻邪褉褌邪 锌邪写褌褉褘屑谢i胁邪械褑褑邪 XFree %s, 褟泻i\n"
-"谢械锌械泄 锌邪写褌褉褘屑谢i胁邪械 泻邪褉褌褘 蟹 2D-锌邪褋泻邪褉褝薪薪械屑."
+"袣邪斜 蟹褉邪斜i褑褜 斜芯谢褜褕 褉邪蟹写械谢邪褳, 胁褘写邪谢i褑械 邪写蟹i薪 i 褋褌胁邪褉褘褑械 锌邪褕褘褉邪薪褘 褉邪蟹写蟹械谢 "
+"(extended)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"袩邪写褌褉褘屑泻邪 3D-锌邪褋泻邪褉褝薪薪褟 褳 袙邪褕邪泄 胁褨写褝邪泻邪褉褑械 胁褘泻邪薪邪薪邪 褌芯谢褜泻褨 褳 XFree %s.\n"
-"XFree %s 屑芯卸邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 褌芯谢褜泻褨 2D-锌邪褋泻邪褉褝薪薪械 写谢褟 谐褝褌邪泄 胁褨写褝邪泻邪褉褌褘."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "小械褉胁械褉 XFree86 %s"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "袣邪薪褎i谐褍褉邪胁邪褑褜 屑邪褞 泻邪褉褌褍"
+msgid "Choose packages to install"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Xinerama extension"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr ""
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "校褋械 i褋薪褍褞褔褘褟 褉邪蟹写蟹械谢褘 薪邪 写褘褋泻褍 %s i 写邪写蟹械薪褘褟 薪邪 i褏 斜褍写褍褑褜 褋褌褉邪褔邪薪褘"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "携泻褍褞 泻邪薪褎i谐褍褉邪褑褘褞 XFree 胁褘 卸邪写邪械褑械 邪褌褉褘屑邪褑褜?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"袙邪褕邪 褋i褋褌褝屑邪 薪械 屑邪械 写邪褋褌邪泻芯胁邪 屑械褋褑邪 写谢褟 褳褋褌邪谢褟胁邪薪薪褟 褑i 邪斜薪邪褳谢械薪薪褟 (%d > %d)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 XFree"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "袩邪蟹薪邪褔褑械 锌邪屑械褉 胁i写褝邪锌邪屑褟褑i"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+msgid "Bhutan"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Multi-head configuration"
-msgstr "褔褘褌邪薪薪械 薪邪褋褌褉芯泄泻i"
+msgid "Reading printer data..."
+msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "袗斜褟褉褘褑械 X 褋械褉胁械褉"
+msgid "Korean keyboard"
+msgstr "UK 泻谢邪胁i褟褌褍褉邪"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "X 褋械褉胁械褉"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Not connected"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 袦斜 褑i 斜芯谢械泄"
+msgid "Greek"
+msgstr "袚褉褝褔邪褋泻i"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 袦斜"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 袦斜"
+msgid "Saint Kitts and Nevis"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "8 MB"
-msgstr "8 袦斜"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 袦斜"
+msgid "Enable OF Boot?"
+msgstr ""
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "2 MB"
-msgstr "2 袦斜"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "袙褘 薪械 屑芯卸邪褑械 褉邪蟹斜i胁邪褑褜 薪邪 褉邪蟹写械谢褘, 锌邪屑械褉 褟泻i褏 屑械薪械泄 蟹邪 16 袦斜"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 袦斜"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "效邪褋褑褨薪褟 胁械褉褌.褉邪蟹谐. 屑邪薪i褌芯褉褍: %s\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "512 kB"
-msgstr "512 袣斜"
+msgid "path"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 袣斜"
+msgid "Mount point"
+msgstr "袣褉芯锌泻邪 屑邪薪褑i褉邪胁邪薪薪褟"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"笑褨 卸邪写邪械褑械 袙褘 蟹邪褏邪胁邪褑褜 蟹屑褟薪械薪薪褨?\n"
-"袘褟谐褍褔邪褟 泻邪薪褎褨谐褍褉邪褑褘褟:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "袨锌褑褘i"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Test"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolution"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
-
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "袦邪薪i褌芯褉"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "袙i写褝邪泻邪褉褌邪"
+msgid "Another one"
+msgstr "褑i泻邪胁邪"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "效邪褋褑褨薪褟 胁械褉褌褘泻邪谢褜薪邪泄 褉邪蟹谐芯褉褌泻i"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "效邪褋褑褨薪褟 谐邪褉褘蟹邪薪褌邪谢褜薪褘泄 褉邪蟹谐芯褉褌泻i"
+msgid "Colombia"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"袛胁邪 泻褉褘褌褘褔薪褘褏 锌邪褉邪屑械褌褉褘 - 谐褝褌邪 褔邪褋褑褨薪褟 胁械褉褌褘泻邪谢褜薪邪泄 褉邪蟹谐芯褉褌泻i, 褑i\n"
-"褔邪褋褑褨薪褟 邪写薪邪褳谢械薪薪褟 褳褋褟谐芯 褝泻褉邪薪褍, 邪 褌邪泻褋邪屑邪 斜芯谢械泄 胁邪卸薪褘 锌邪褉邪屑械褌褉 -\n"
-"褔邪褋褑褨薪褟 谐邪褉褘蟹邪薪褌邪谢褜薪邪泄 褋i薪褏褉邪薪i蟹邪褑褘i 褉邪蟹谐芯褉褌泻i, 褑i 褔邪褋褑褨薪褟 胁褘胁邪写褍\n"
-"褉邪写泻芯褳 褝泻褉邪薪褍.\n"
-"\n"
-"袙袝袥鞋袦I 袙袗袞袧袗, 泻邪斜 邪斜褉邪薪褘 胁邪屑i 屑邪薪i褌芯褉 屑械褳 褔邪褋褑褨薪褞 褋i薪褏褉邪薪i蟹邪褑褘i, 褟泻邪褟\n"
-"薪械 锌械褉邪胁褘褕邪械 褎邪泻褌褘褔薪褘褟 屑邪谐褔褘屑邪褋褑i 胁邪褕邪谐邪 屑邪薪i褌芯褉褍: 褍 锌褉芯褑i谢械谐谢褘屑 胁褘锌邪写泻褍\n"
-"胁褘 屑芯卸邪褑械 褋邪锌褋邪胁邪褑褜 屑邪薪i褌芯褉.\n"
-"袣邪谢i 胁褘 褋褍屑薪褟胁邪械褑械褋褟, 邪斜褟褉褘褑械 泻邪薪褋械褉胁邪褌褘褳薪褘褟 薪邪褋褌褉芯泄泻i."
#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Vendor"
-msgstr "袗写泻邪褌"
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Reunion"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "袗斜褟褉褘褑械 屑邪薪i褌芯褉"
+msgid "Details"
+msgstr "袩邪写褉邪斜褟蟹薪邪褋褑i"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "袙i写褝邪泻邪褉褌邪: %s"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "袙褘斜邪褉 锌邪屑械褉邪褳 褝泻褉邪薪褍 i 谐谢褘斜i薪i 泻芯谢械褉褍"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolutions"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 屑i谢i褟褉写邪 泻芯谢械褉邪褳 (24 斜i褌褘)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "袩褉褘薪褌褝褉"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 屑i谢褜褢薪邪褳 泻芯谢械褉邪褳 (24 斜i褌褘)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 褌褘褋褟褔 泻芯谢械褉邪褳 (16 斜i褌邪褳)"
+msgid "Mongolia"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 褌褘褋褟褔褘 泻芯谢械褉邪褳 (15 斜i褌邪褳)"
+msgid "Mounted\n"
+msgstr "袟邪屑邪薪褑i褉邪胁邪薪邪\n"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 泻芯谢械褉邪褳 (8 斜i褌邪褳)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "袟邪锌褍褋泻 X 锌褉褘 褋褌邪褉褑械 褋i褋褌褝屑褘"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
+msgid "Restore Users"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d 褋械泻褍薪写邪褳"
+msgid "Encryption key for %s"
+msgstr "袩邪褉芯谢i 薪械 褋褍锌邪写邪褞褑褜"
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"Portmapper (邪谐谢褟写邪谢褜薪i泻 锌邪褉褌芯褳) 泻i褉褍械 RPC 蟹谢褍褔褝薪薪褟屑i, 褟泻i褟 蟹胁褘褔邪泄薪邪\n"
+"胁褘泻邪褉褘褋褌芯褳胁邪褞褑褑邪 褌邪泻i屑i 锌褉邪褌邪泻芯谢邪屑i 褟泻 NFS i NIS. Portmap 褋械褉胁械褉 锌邪胁i薪械薪 "
+"胁褘泻芯薪胁邪褑褑邪\n"
+"薪邪 屑邪褕褘薪邪褏 褟泻i褟 锌褉邪褑褍褞褑褜 褟泻 褋械褉胁械褉褘 写谢褟 锌褉邪褌邪泻芯谢邪褳, 褟泻i褟 褋泻邪褉褘褋褌芯褳胁邪褞褑褜 RPC."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "袩邪锌褟褉褝写卸邪薪薪械: 褌褝褋褑i褉邪胁邪薪薪械 薪邪 谐褝褌邪泄 胁i写褝邪泻邪褉褑械 薪械斜褟褋锌械褔薪邪"
+msgid "Detected hardware"
+msgstr "袚谢. 邪锌i褋邪薪薪械 邪斜褋褌邪谢褟胁邪薪薪褟"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
+msgid "Mauritius"
+msgstr ""
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "袩褉邪胁械褉泻邪 锌邪褉邪屑械褌褉邪褳 薪邪褋褌褉芯泄泻i"
+msgid "Myanmar (Burmese)"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
+msgid "Enabling swap partition %s"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢褍 %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
+"袧械 蟹薪芯泄写蟹械薪邪 褉邪蟹写蟹械谢邪褳 FAT 写谢褟 蟹屑褟薪械薪薪褟 锌邪屑械褉邪褳 邪谢褜斜芯 胁褘泻邪褉褘褋褌邪薪薪褟\n"
+"褳 褟泻邪褋褑i 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (褑i 薪械写邪褋褌邪褌泻芯胁邪 锌褉邪褋褌芯褉褘 薪邪 写褘褋泻褍)"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "袗褉屑褟薪褋泻i (褋褌邪褉褘)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"袦芯卸薪邪 薪邪褋褌褉芯i褑褜 褋i褋褌褝屑褍 写谢褟 邪褳褌邪屑邪褌褘褔薪邪谐邪 蟹邪锌褍褋泻褍 X 锌邪褋谢褟 褋褌邪褉褌褍 褋i褋褌褝屑褘.\n"
-"袞邪写邪械褑械, 泻邪斜 X 褋褌邪褉褌邪胁邪褳 锌褉褘 褉褝褋褌邪褉褑械?"
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "袟邪锌褍褋泻 X 锌褉褘 褋褌邪褉褑械 褋i褋褌褝屑褘"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "小械褉胁械褉 XFree86: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "小械褉胁械褉 XFree86: %s\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "袦邪薪i褌芯褉"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s 锌邪屑褘谢泻邪 褎邪褉屑邪褌邪胁邪薪薪褟 %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "袩邪褉邪屑械褌褉褘 谐谢褘斜i薪i 泻芯谢械褉褍: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "袩邪写褉褘褏褌芯褳泻邪 褉邪蟹写械谢邪褳 薪械 褳写邪谢邪褋褟: %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "袙i写褝邪锌邪屑褟褑褜: %s 袣斜\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "袣邪薪邪写褋泻i (袣胁械斜褝泻)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "袙i写褝邪泻邪褉褌邪: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "袪邪蟹写蟹械谢 %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "效邪褋褑褨薪褟 胁械褉褌.褉邪蟹谐. 屑邪薪i褌芯褉褍: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Workstation"
+msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "效邪褋褑褨薪褟 谐邪褉.褉邪蟹谐. 屑邪薪i褌芯褉褍: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "袦邪薪i褌芯褉: %s\n"
+msgid "Kyrgyzstan"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "袦褘褕: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../Xconfig/various.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "孝褘锌 屑褘褕褘: %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, 锌械褉褘褟写褘褔薪褘 泻邪屑邪薪写薪褘 锌谢邪薪邪胁邪谢褜薪i泻."
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "孝褘锌 泻谢邪胁i褟褌褍褉褘: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"袙褘 锌邪胁i薪薪褘 屑械褑褜 泻邪褉邪薪褢胁褘 褉邪蟹写蟹械谢.\n"
+"袛谢褟 谐褝褌邪谐邪 褋褌胁邪褉褘褑械 褉邪蟹写蟹械谢 (邪谢褜斜芯 邪写蟹薪邪褔褑械 褳卸芯 i褋薪褍褞褔褘).\n"
+"袩芯褌褘屑 邪斜褟褉褘褑械 ``袣褉芯锌泻邪 屑邪薪褑i褉邪胁邪薪薪褟'' i 褳褋褌邪薪邪胁i褑械 褟械 褳 `/'"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "袨锌褑褘i: %s"
+msgid "Proxy should be http://..."
+msgstr "Proxy 锌邪胁i薪械薪 斜褘褑褜 http://..."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Mount point: "
-msgstr "袩褍薪泻褌 屑邪薪褑i褉邪胁邪薪薪褟:"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "褋械褉胁械褉"
+msgid "South Africa"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Western Sahara"
msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "袣褉芯锌泻邪 屑邪薪褑i褉邪胁邪薪薪褟"
+msgid "Etherboot Floppy/ISO"
+msgstr "小褌胁邪褉褘褑褜 蟹邪谐褉. 写褘褋泻"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Server"
-msgstr "褋械褉胁械褉"
+msgid "Modify printer configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "袦邪薪褑i褉邪胁邪薪薪械"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unmount"
-msgstr "袪邪蟹屑邪薪褑i褉邪胁邪褑褜"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New"
-msgstr "袧芯胁褘"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪泄褑械 ``%s'' 蟹邪屑械褋褌"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "孝褘锌"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "小锌邪褔邪褌泻褍 蟹褉邪斜i褑械 ``Unmount''"
+msgid "Please test the mouse"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "袟薪i褕褔褘褑褜"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "袉薪褕褘褟"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "小褌胁邪褉褘褑褜"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "孝褘锌褘 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳:"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Empty"
-msgstr "袩褍褋褌邪"
+msgid "Sector"
+msgstr "小械泻褌邪褉"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Qatar"
+msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"袙褘 薪械 屑芯卸邪褑械 胁褘斜褉邪褑褜 谐褝褌褘 锌邪泻械褌, 褌邪屑褍 褟泻 薪械 褏邪锌邪械 屑械褋褑邪 写谢褟 褟谐芯 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟"
+msgid "generate auto-install floppy"
+msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+msgid "Dialing mode"
+msgstr "袪褝卸褘屑 蟹谢褍褔褝薪薪褟"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+msgid "File sharing"
msgstr ""
-"袟邪褉邪蟹 胁褘 屑邪械褑械 褌芯谢褜泻i 邪写蟹i薪 胁褟谢i泻i 褉邪蟹写蟹械谢 FAT\n"
-"(褟泻褨 蟹胁褘褔邪泄薪邪 胁褘泻邪褉褘褋褌芯褳胁邪械 MS Dos/Windows).\n"
-"袩褉邪锌邪薪褍褞, 锌邪-锌械褉褕邪械, 蟹屑褟薪i褑褜 锌邪屑械褉褘 褉邪蟹写蟹械谢邪\n"
-"(泻谢i泻薪i褑械 薪邪 褟谐芯, 邪 锌芯褌褘屑 薪邪 \"蟹屑褟薪械薪薪械 锌邪屑械褉邪褳\")"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Wizard"
-msgstr "袦邪泄褋褌邪褉 褋褌胁邪褉褝薪薪褟"
+msgid "Clean /tmp at each boot"
+msgstr "袗褔褘褕褔邪褑褜 /tmp 锌褉褘 泻芯卸薪邪泄 蟹邪谐褉褍蟹褑褘"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+msgid "Malawi"
msgstr ""
-"袣邪谢i 胁褘 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 boot 胁芯斜谢邪褋褑褜, 褌邪写褘 褉邪蟹屑褟褋褑i褑械 褟械\n"
-" 薪械 写邪谢械泄 蟹邪 2048 褋械泻褌邪褉芯褳 邪写 锌邪褔邪褌泻褍 写褘褋泻邪"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "袩邪-锌械褉褕邪械, 蟹褉邪斜i褑械 褉褝蟹械褉胁芯胁褍褞 泻芯锌i褞 胁邪褕褘褏 写邪写蟹械薪褘褏"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your type of mouse."
+msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Read carefully!"
-msgstr "效褘褌邪泄褑械 褳胁邪卸谢i胁邪!"
+msgid "class of hardware device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Encryption key"
+msgid "United Kingdom"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "袩邪褉芯谢i 薪械 褋褍锌邪写邪褞褑褜"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"袚褝褌褘 锌邪褉芯谢褜 蟹邪薪邪写褌邪 锌褉芯褋褌褘 (褟谐芯 写邪褳卸褘薪褟 锌邪胁i薪薪邪 斜褘褑褜 薪械 屑械薪械泄 蟹邪 %d 谢i褌邪褉邪褳)"
+msgid "running"
+msgstr "校胁邪谐邪!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
+msgid "default"
+msgstr "袩邪 写邪屑邪褳谢械薪薪褞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "孝褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘:"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "孝褘锌: "
+msgid "Indonesia"
+msgstr "薪褟屑邪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "薪邪 褕褘薪械 %d id %d\n"
+msgid "France [SECAM]"
+msgstr "肖褉邪薪褑褘褟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "孝褘锌 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳: %s\n"
+msgid "restrict"
+msgstr "邪斜屑械卸邪胁邪薪薪械"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-写褘褋泻i %s\n"
+msgid "must have"
+msgstr "锌邪胁i薪薪褘 屑械褑褜"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info: "
-msgstr "I薪褎邪褉屑邪褑褘褟: "
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "袚械邪屑械褌褉褘褟: %s 褑褘谢i薪写褉邪褳, %s 谐邪谢芯胁邪泻, %s 褋械泻褌邪褉邪褳\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Senegal"
+msgstr "孝邪斜谢i褑邪"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s\n"
-msgstr "袩邪屑械褉: %s\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "I屑褟 写邪屑械薪褍"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Read-only"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Device: "
-msgstr "袩褉褘谢邪写邪:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "access to administrative files"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "I屑褟 褎邪泄谢褍 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-写褘褋泻i %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "袩邪屑械褉 褎褉邪谐屑械薪褌褍 %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "校蟹褉芯胁械薪褜 %s\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"袟邪谐褉褍蟹邪褔薪褘 褉邪蟹写蟹械谢 锌邪 写邪屑邪褳谢械薪薪褞\n"
-" (写谢褟 蟹邪谐褉褍蟹泻i MS-DOS, 邪 薪械 写谢褟 lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "肖邪泄谢(褘) 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "袟邪屑邪薪褑i褉邪胁邪薪邪\n"
+msgid "Montserrat"
+msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "袧械 邪写褎邪褉屑邪褌邪胁邪薪邪\n"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械\n"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "笑褘谢i薪写褉褘 蟹 %d 锌邪 %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s 褋械泻褌邪褉邪褳"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "袩邪屑械褉: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "袩邪褔邪褌邪泻: 褋械泻褌邪褉 %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Name: "
-msgstr "I屑褟: "
+msgid "Connecting to the Internet "
+msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "袥i褌邪褉邪 写谢褟 DOS-写褘褋泻褍: %s (薪邪褳谐邪写)\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "partition %s is now known as %s"
+msgid "TV card"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Copying %s"
+msgid ", "
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid 薪械 锌褉邪褑邪蟹写芯谢褜薪褘"
+msgid "Remove selected host/network"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix - 谐褝褌邪 锌邪褕褌芯胁褘 褌褉邪薪褋锌邪褉褌薪褘 邪谐械薪褌, 锌褉邪谐褉邪屑邪, 褟泻邪褟\n"
+"锌械褉邪屑褟褕褔邪械 锌芯褕褌褍 蟹 邪写薪芯泄 屑邪褕褘薪褘 薪邪 泄薪褕褍褞."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "校褋械 写邪写蟹械薪褘械 褳 褉邪蟹写蟹械谢械 %s 斜褍写褍褑褜 褋褌褉邪褔邪薪褘 锌邪褋谢褟 褎邪褉屑邪褌邪胁邪薪薪褟"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "袣邪斜 蟹屑褟薪械薪薪i 褳褋褌褍锌i谢i 褳 写蟹械褟薪薪械, 薪械芯斜褏芯写薪邪 锌械褉邪蟹邪谐褉褍蟹i褑褑邪"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "孝邪斜谢i褑邪 褉邪蟹屑褟褕褔褝薪薪褟 锌褉褘谢邪写褘 %s 斜褍写蟹械 蟹邪锌i褋邪薪邪 薪邪 写褘褋泻!"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Restore From CD"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "What type of partitioning?"
-msgstr "携泻i 褌褘锌 写褉褍泻邪褉泻i 胁褘 屑邪械褑械?"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"袙邪褕 泻邪屑锌'褞褌邪褉 屑芯卸邪 斜褘褑褜 褋泻邪薪褎褨谐褍褉邪胁邪薪褘 薪邪 褋褍屑械褋薪邪械 胁褘泻邪褉褘褋褌邪薪薪械\n"
+" 袉薪褌褝褉薪褝褌褍 (Internet Connection Sharing)?\n"
+"\n"
+"袟邪褳胁邪谐邪: 胁邪屑 锌邪褌褉褝斜薪褘 褋械褌泻邪胁褘 邪写邪锌褌邪褉 写谢褟 锌邪写泻谢褞褔褝薪薪褟 写邪 袥袙小.\n"
+"\n"
+"袙褘 卸邪写邪械褑械 褍褋褌邪谢褟胁邪褑褜 褋褍屑械褋薪褘 写芯褋褌褍锌 写邪 Internet?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "袘褍写蟹褜褑械 褍胁邪卸谢i胁褘. 袚褝褌褍褞 邪锌械褉邪褑褘褞 薪械谢褜谐邪 邪写屑褟薪i褑褜"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褋械褌泻邪胁褘 邪写邪锌褌邪褉, 褟泻i 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 "
+"写邪谢褍褔褝薪薪褟 写邪 i薪褌褝褉薪褝褌"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "chunk size"
-msgstr "锌邪屑械褉 斜谢芯泻褍"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "level"
-msgstr "褍蟹褉芯胁械薪褜"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "锌褉褘谢邪写邪"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 蟹邪斜邪褉芯薪械薪邪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Various"
+msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Mount options"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "肖邪泄谢 褍卸芯 i褋薪褍械. 袙褘泻邪褉褘褋褌邪褑褜 褟谐芯?"
+msgid "Latin American"
+msgstr "袥邪褑i薪邪-袗屑械褉褘泻邪薪褋泻i"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"肖邪泄谢 褍卸芯 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 i薪褕邪泄 胁i褉褌褍邪谢褜薪邪泄 褋i褋褌褝屑邪泄. 袣邪谢i 谢邪褋泻邪, \n"
-"邪斜褟褉褘褑械 i薪褕褍褞 薪邪蟹胁褍"
+msgid "Japanese text printing mode"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "校谢邪褋薪邪械 i屑褟"
+msgid "Old device file"
+msgstr "袗斜褟褉褘褑械 褎邪泄谢"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "孝褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘:"
+msgid "Info: "
+msgstr "I薪褎邪褉屑邪褑褘褟: "
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size in MB: "
-msgstr "袩邪屑械褉 褍 袦斜:"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "袨锌褑褘i: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Loopback file name: "
-msgstr "I屑褟 胁i褉褌褍邪谢褜薪邪谐邪 褉邪蟹写蟹械谢褍"
+msgid "Please wait"
+msgstr "袣邪谢i 谢邪褋泻邪, 锌邪褔邪泻邪泄褑械"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Loopback"
-msgstr "袙i褉褌褍邪谢褜薪邪褟 褎邪泄谢邪胁邪褟 褋i褋褌褝屑邪 (loopback)"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "袚褝褌褘 褉邪蟹写蟹械谢 薪械 屑芯卸邪 斜褘褑褜 胁褘泻邪褉褘褋褌邪薪褘 锌邪写 胁i褉褌褍邪谢褜薪褍褞 褎邪泄谢邪胁褍褞 褋i褋褌褝屑褍"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "袟褉芯斜谢械薪邪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LVM name?"
+msgid "Ethernet Card"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "new"
-msgstr "薪芯胁褘"
+msgid "Info"
+msgstr "I薪褎邪褉屑邪褑褘褟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "袙褘斜褟褉褘褑械 i褋薪褍褞褔褘 LVM 写谢褟 写邪斜邪褳谢械薪薪褟"
+msgid "Install"
+msgstr "校褋褌邪谢褢褳泻邪"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "袗斜褟褉褘褑械 i褋薪褍褞褔褘 RAID 写谢褟 写邪写邪薪薪褟"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"袧邪褑褨褋薪褨褑械 \"孝邪泻\", 泻邪谢褨 卸邪写邪械褑械 胁褘写邪谢褨褑褜 褍褋械 写邪写蟹械薪褘褟\n"
+"褨 褉邪蟹写蟹械谢褘 薪邪 谐褝褌褘屑 写褘褋泻褍. 袘褍写蟹褑械 褍胁邪卸谢褨胁褘褟, 锌邪褋谢褟 谐褝褌邪泄 邪锌械褉邪褑褘褨 胁褘 薪械\n"
+"\n"
+"蟹写芯谢械械褑械 邪写薪邪胁褨褑褜 谢褞斜褘褟 写邪写蟹械薪褘褟 褨 褉邪蟹写蟹械谢褘, 褍谢褨褔胁邪褞褔褘 褨 写邪写蟹械薪褘褟 Windows\n"
+"\n"
+"\n"
+"袧邪褑褨褋薪褨褑械 \"袗写屑械薪邪\" 泻邪斜 邪写屑褟薪褨褑褜 邪锌械褉邪褑褘褞 斜械蟹 褋褌褉邪褌褘 写邪写蟹械薪褘褏 褨 褉邪蟹写蟹械谢邪褳"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "袩械褉邪薪芯褋褨褑褑邪 褉邪蟹写蟹械谢..."
+msgid "Exit install"
+msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Moving"
-msgstr "袩械褉邪薪芯褋褨屑"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"校褋械 邪写泻邪薪褎褨谐褍褉邪胁邪薪邪.\n"
+"袟邪褉邪蟹 胁褘 屑芯卸邪褑械 褋褍屑械褋薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 锌邪写泻谢褞褔褝薪薪械 写邪 Internet\n"
+"蟹 褨薪褕褘屑褨 泻邪屑锌'褞褌褝褉邪屑褨 褳 胁邪褕邪泄 袥袙小, 泻邪褉褘褋褌邪褞褔褘褋褟 邪褳褌邪屑邪褌褘褔薪褘屑\n"
+"泻邪薪褎褨谐褍褉邪胁邪薪薪械屑 (DHCP)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "袧邪 褟泻i 褋械泻褌邪褉 锌械褉邪薪械褋褑褨?"
+msgid "Remote CUPS server"
+msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 CUPS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Sector"
-msgstr "小械泻褌邪褉"
+msgid "Sun - Mouse"
+msgstr "Sun - 袦褘褕"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "袧邪 褟泻i 写褘褋泻 锌械褉邪薪械褋褑褨?"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move"
-msgstr "袩械褉邪薪芯褋"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "袙褘写邪谢i褑褜 蟹 褋i褋褌褝屑褘"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "袩邪屑械褉 褍 袦斜:"
+msgid "Ethiopia"
+msgstr "协褋褌芯薪褋泻i"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "袙褘斜邪褉 薪芯胁褘褏 锌邪屑械褉邪褳"
+msgid "Devanagari"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Resize"
-msgstr "袟屑褟薪械薪薪械 锌邪屑械褉邪褳"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "校褋械 写邪写蟹械薪褘褟 褳 褉邪蟹写蟹械谢械 %s 斜褍写褍褑褜 褋褌褉邪褔邪薪褘"
+msgid "Total size: %d / %d MB"
+msgstr "袗谐褍谢褜薪褘 锌邪屑械褉: %d / %d M斜"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "校褋械 写邪写蟹械薪褘褟 褳 谐褝褌褘屑 褉邪蟹写蟹械谢械 锌邪胁i薪薪褘 斜褘褑褜 蟹邪褉褏i胁邪胁邪薪褘褟"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "孝邪斜谢i褑邪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "This partition is not resizeable"
-msgstr "袩邪屑械褉褘 褟泻芯谐邪 褉邪蟹写蟹械谢邪 胁褘 卸邪写邪械褑械 蟹屑褟薪i褑褜?"
+msgid "Search for new scanners"
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "袩邪写谢褨泻 屑械卸邪褳 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 FAT"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Disabling servers..."
+msgstr "袙褘蟹薪邪褔褝薪薪械 锌褉褘谢邪写邪褳..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 屑邪薪褑i褉邪胁邪褑褜 锌褉褘谢邪写褍 %s?"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "校褋褌邪谢褟胁邪薪薪械 %s 薪械 邪褌褉褘屑邪谢邪褋褟. 校蟹薪i泻谢邪 薪邪褋褌褍锌薪邪褟 锌邪屑褘谢泻邪:"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-"袧械谢褜谐邪 褳褋褌邪谢褟胁邪褑褜 锌褍薪泻褌 屑邪薪褑i褉邪胁邪薪薪褟, 褌邪屑褍 褕褌芯 褉邪蟹写械谢 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 写谢褟\n"
-"胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘.\n"
-"小锌邪褔邪褌泻褍 胁褘写邪谢i褑械 胁i褉褌褍邪谢褜薪褍褞 褋i褋褌褝屑褍"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 屑邪薪褑i褉邪胁邪褑褜 锌褉褘谢邪写褍 %s?"
+msgid "Network printer (TCP/Socket)"
+msgstr "小械褌泻邪胁褘 锌褉褘薪褌褝褉 (TCP/Socket)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 屑邪薪褑i褉邪胁邪褑褜 胁i褉褌褍邪谢褜薪褍褞 锌褉褘谢邪写褍 %s?"
+msgid "Backup User files..."
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "Install system"
+msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Which filesystem do you want?"
-msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "袟屑褟薪i褑褜 褌褘锌 褉邪蟹写蟹械谢褍"
+msgid "First DNS Server (optional)"
+msgstr "袩械褉褕褘 褋械褉胁械褉 DNS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "校褋械 写邪写蟹械薪褘褟 褳 褉邪蟹写蟹械谢械 %s 斜褍写褍褑褜 褋褌褉邪褔邪薪褘 锌邪褋谢褟 蟹屑械薪褘 褟谐芯 褌褘锌褍"
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 胁i褉褌褍邪谢褜薪邪谐邪 褉邪蟹写蟹械谢褍 %s"
+msgid "dhcpd Config..."
+msgstr "袧邪褋褌褉芯泄泻邪 IDE"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "The setup has already been done, but it's currently disabled."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "袩邪褉邪屑械褌褉褘: "
+msgid "LILO/grub Installation"
+msgstr "校褋褌邪谢褟胁邪薪薪械 LILO/GRUB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "袩邪褔邪褌泻芯胁褘 褋械泻褌邪褉:"
+msgid "Israeli"
+msgstr "I褳褉褘褌"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create a new partition"
-msgstr "小褌胁邪褉褝薪薪械 薪芯胁邪谐邪 褉邪蟹写蟹械谢褍"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "load setting"
+msgstr "褎邪褉屑邪褌邪胁邪薪薪械"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify RAID"
-msgstr "袟屑褟薪i褑褜 RAID"
+msgid "Floppy can be removed now"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "袙褘写邪谢i褑褜 蟹 LVM"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "袙褘写邪谢i褑褜 蟹 褋i褋褌褝屑褘"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "袙褘写邪谢i褑褜 蟹 RAID"
+msgid "Denmark"
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "袛邪写邪褑褜 写邪 LVM"
+msgid "Moving partition..."
+msgstr "袩械褉邪薪芯褋褨褑褑邪 褉邪蟹写蟹械谢..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "袛邪写邪褑褜 写邪 RAID"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP 褋械褉胁械褉邪 SMB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Format"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械"
+msgid "Test of the configuration"
+msgstr "袩褉邪胁械褉泻邪 锌邪褉邪屑械褌褉邪褳 薪邪褋褌褉芯泄泻i"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "I薪褎邪褉屑邪褑褘褟"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "袩邪褋锌褉邪斜褍械屑 胁褘褉邪褌邪胁邪褑褜 褌邪斜谢i褑褍 褉邪蟹写蟹械谢邪褳"
+msgid "Installing %s ..."
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写\n"
-"校褋械 写邪写蟹械薪褘褟 薪邪 谐褝褌邪泄 写褘褋泻械褑械 斜褍写褍褑褜 褋褌褉邪褔邪薪褘"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "校胁邪谐邪!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select file"
-msgstr "袗斜褟褉褘褑械 褎邪泄谢"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"孝邪斜谢i褑邪 褉邪蟹屑褟褕褔褝薪薪褟 褉褝蟹械褉胁芯胁邪谐邪 写褘褋泻褍 屑邪械 i薪褕褘 锌邪屑械褉\n"
-"袩褉邪褑褟谐胁邪褑褜 写邪谢械泄?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "袗褳褌邪屑邪薪褑i褉邪胁邪薪薪械 蟹屑械薪薪褘褏 薪邪蟹邪锌邪褕胁邪谢褜薪褨泻邪褳"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
+msgid "Andorra"
+msgstr "袗写泻邪褌"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
+msgid "Sierra Leone"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
+msgid "Botswana"
+msgstr "协褋褌芯薪褋泻i"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "袟邪锌i褋 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳"
+msgid "(default value: %s)"
+msgstr " ? (蟹屑芯褳褔邪薪薪械 %s) "
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "Alternative test page (Letter)"
msgstr ""
-"袣邪斜 蟹褉邪斜i褑褜 斜芯谢褜褕 褉邪蟹写械谢邪褳, 胁褘写邪谢i褑械 邪写蟹i薪 i 褋褌胁邪褉褘褑械 锌邪褕褘褉邪薪褘 褉邪蟹写蟹械谢 "
-"(extended)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "袛邪写邪褑褜 褉邪蟹写蟹械谢 薪械屑邪谐褔褘屑邪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "校褋械 锌械褉褕邪褋薪褘褟 褉邪蟹写蟹械谢褘 胁褘泻邪褉褘褋褌邪薪褘"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "I薪褎邪褉屑邪褑褘褟"
+msgid "Choose an X server"
+msgstr "袗斜褟褉褘褑械 X 褋械褉胁械褉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "袪邪蟹屑械褉泻邪胁邪褑褜 邪褳褌邪屑邪褌褘褔薪邪"
+msgid "Swap partition size in MB: "
+msgstr "袩邪屑械褉 swap 褉邪蟹写蟹械谢褍 褳 M斜:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clear all"
-msgstr "袗褔褘褋褑i褑褜 褍褋褢"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
+msgid "No changes to backup!"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "袙褘泄褋褑i 斜械蟹 蟹邪锌i褋褍 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳"
+msgid "Formatted\n"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "袙褘泄褋褑i 斜械蟹 蟹邪褏邪胁邪薪薪褟"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褍褋褌邪谢褟胁邪薪薪褟"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Continue anyway?"
-msgstr "小邪锌褉邪褳写褘 锌褉邪褑褟谐胁邪褑褜?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "袪褝卸褘屑 褝泻褋锌械褉褌褍"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "袟胁褘褔邪泄薪褘 褉褝卸褘屑"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Undo"
-msgstr "袗写泻邪褌"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "小褌胁邪褉褝薪薪械 薪芯胁邪谐邪 褉邪蟹写蟹械谢褍"
-
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "袟屑褟薪i褑褜 褌褘锌 褉邪蟹写蟹械谢褍"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS 褋械褉胁械褉"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS Domain"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"袩褉邪褌邪泻芯谢 rusers 写邪蟹胁邪谢褟械 泻邪褉褘褋褌邪谢褜薪i泻邪屑 褋械褌泻i 胁褘蟹薪邪褔邪褑褜, 褏褌芯\n"
+"褳胁邪泄褕芯褳 i 锌褉邪褑褍械 薪邪 屑邪褕褘薪邪褏 褳 褋械褌褑褘."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Username"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+msgid "Automatic Steps Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "褑i泻邪胁邪"
+#: ../../lang.pm:1
+#, c-format
+msgid "Barbados"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Which username"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+msgid "Please select data to backup..."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "cpu # "
+msgid "received"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SMBus controllers"
+msgid "/File/_New"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP 褋械褉胁械褉邪 SMB"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "USB controllers"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "High"
+msgstr "袙褘褋芯泻i"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "NoVideo"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Joystick"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Scanner"
-msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
+msgid "Local Printers"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "袗谐褍谢褜薪褘"
+msgid "Installation image directory"
+msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS 褋械褉胁械褉:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Modem"
-msgstr "袩芯褉褌 屑褘褕褘"
+msgid "Port: %s"
+msgstr "袩芯褉褌"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "褑i泻邪胁邪"
+msgid "Spain"
+msgstr "I褋锌邪薪褋泻i"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "袚褝褌邪 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 褳卸芯 写邪写邪写蟹械薪邪"
-#: ../../harddrake/data.pm:1
+#: ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a file"
+msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Apply"
+msgstr "袩褉懈屑械薪懈褌褜"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "小褌邪薪写邪褉褌薪褘"
+msgid "Auto-detect available ports"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "袉薪褕褘褟"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 蟹邪斜邪褉芯薪械薪邪"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tvcard"
+msgid "San Marino"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Videocard"
-msgstr "袙i写褝邪-褉褝卸褘屑"
+msgid "Belgium"
+msgstr "袘械谢褜谐i泄褋泻i"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "孝褘锌: "
+msgid "Kuwait"
+msgstr "袙褘褏邪写"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "袗斜褟褉褘褑械 屑褝薪褝写卸邪褉 胁芯泻薪邪褳:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CD/DVD burners"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "CDROM"
+msgid "First Time Wizard"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "袛邪褑泻i"
+#: ../../install_steps.pm:1
+#, c-format
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"校蟹薪i泻谢邪 锌邪屑褘谢泻邪, 褟泻褍褞 薪械 邪褌褉褘屑谢褨胁邪械褑褑邪 泻邪褉褝泻褌薪邪 邪锌褉邪褑邪胁邪褑褜,\n"
+"褌邪屑褍 锌褉邪褑褟谐胁邪泄褑械 薪邪 褋胁邪褞 褉褘蟹褘泻褍."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Zip"
+msgid "please wait, parsing file: %s"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
+msgid "Taiwan"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Pakistan"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Driver:"
-msgstr "褋械褉胁械褉"
-
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "袙械褉褋i褟: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "I屑褟 锌褉邪胁邪泄写邪褉褍, 薪邪锌褉褘泻谢邪写 锌褉邪胁邪泄写邪褉.net"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "袙械褉褋i褟: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"校 袙邪褕邪泄 褋i褋褌褝屑械 屑邪械褑褑邪 薪械写邪褏芯锌 褉褝褋褍褉褋邪褳, 褌邪屑褍 屑邪谐褔褘屑褘 锌褉邪斜谢械屑褘\n"
+"锌褉褘 褳褋褌邪谢褟胁邪薪薪i Mandrake Linux. 校 谐褝褌褘屑 胁褘锌邪写泻褍 锌邪褋锌褉邪斜褍泄褑械 褌褝泻褋褌邪胁褍褞\n"
+"锌褉邪谐褉邪屑褍 褳褋褌邪谢褟胁邪薪薪褟. 袛谢褟 谐褝褌邪谐邪 薪邪褑i褋薪i褑械 `F1' 褍 褔邪褋 蟹邪谐褉褍蟹泻i, 邪 锌芯褌褘屑\n"
+"薪邪斜褟褉褘褑械 `text' i 薪邪褑i褋薪i褑械 <ENTER>."
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 褉邪蟹写蟹械谢 Windows 写谢褟 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr ""
+msgid "Armenian (typewriter)"
+msgstr "袗褉屑褟薪褋泻i (typewriter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection type: "
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "袟邪锌褍褋泻 X 锌褉褘 褋褌邪褉褑械 褋i褋褌褝屑褘"
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s 蟹 锌邪写褌褉褘屑泻邪泄 3D-锌邪褋泻邪褉褝薪薪褟"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "India"
+msgstr "I褉邪薪褋泻i"
+
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
+msgid "Chad"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovakia"
+msgstr "小谢邪胁械薪褋泻i"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "Singapore"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No open source driver"
+msgid "Cambodia"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "袩褉邪胁械褉泻邪 锌邪褉邪屑械褌褉邪褳 薪邪褋褌褉芯泄泻i"
-
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
+msgid "Monitor HorizSync: %s\n"
+msgstr "效邪褋褑褨薪褟 谐邪褉.褉邪蟹谐. 屑邪薪i褌芯褉褍: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Trouble shooting"
+msgid "Path"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
+msgid "Add host"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No alternative driver"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "enable radio support"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Radio support:"
+msgid "China (broadcast)"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "褎邪褉屑邪褌邪胁邪薪薪械"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Use quota for backup files."
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "袟屑褟薪i褑褜 褌褘锌 褉邪蟹写蟹械谢褍"
+msgid "Configuring printer \"%s\"..."
+msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Card model:"
-msgstr "袗写褉邪褋褘 锌邪屑褟褑褨 泻邪褉褌褘 (DMA)"
+msgid "Internet connection"
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
+"袟邪谐褉褍蟹泻邪 屑芯写褍谢褞 %s 薪械 锌褉邪泄褕谢邪.\n"
+"袞邪写邪械褑械 锌邪褋锌褉邪斜邪胁邪褑褜 蟹 i薪褕褘屑i 锌邪褉邪屑械褌褉邪屑i?"
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "袗谐褍谢褜薪褘"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid "Bosnia and Herzegovina"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"袙邪屑 薪械邪斜褏芯写薪邪 蟹邪写邪褑褜 锌褉邪胁i谢褜薪褘 褌褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (ext2, reiserfs)\n"
+"写谢褟 谐褝褌邪泄 泻褉芯锌泻i 屑邪薪褑i褉邪胁邪薪薪褟\n"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "袟褉芯斜谢械薪邪"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "袙邪褕 胁褘斜邪褉? (蟹屑芯褳褔邪薪薪械 %s) "
+msgid "Netherlands"
+msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "袛褉褝薪薪褘 胁褘斜邪褉, 锌邪褋锌褉邪斜褍泄褑械 褟褕褔械\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "袟邪褏邪胁邪薪薪械 褳 褎邪泄谢"
-#: ../../interactive/stdio.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "校薪褍褌褉邪薪邪褟 ISDN 泻邪褉褌邪"
-#: ../../interactive/stdio.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "孝邪斜谢i褑邪"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "袙邪褕 胁褘斜邪褉? (蟹屑芯褳褔邪薪薪械 %s) "
-
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "WARNING"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 aboot?"
-
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "袨锌褑褘i: %s"
+msgid "Installing bootloader"
+msgstr "校褋褌邪谢褟胁邪薪薪械 蟹邪谐褉褍蟹褔褘泻褍"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "袙邪褕 胁褘斜邪褉? (蟹屑芯褳褔邪薪薪械 %s) "
+msgid "replay"
+msgstr "袩械褉邪蟹邪谐褉褍蟹i褑褜"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "detected %s"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Virgin Islands (U.S.)"
msgstr ""
-"袟邪谐褉褍蟹泻邪 屑芯写褍谢褞 %s 薪械 锌褉邪泄褕谢邪.\n"
-"袞邪写邪械褑械 锌邪褋锌褉邪斜邪胁邪褑褜 蟹 i薪褕褘屑i 锌邪褉邪屑械褌褉邪屑i?"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "袩邪蟹薪邪褔褑械 锌邪褉邪屑械褌褉褘"
-
-#: ../../modules/interactive.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "袗褳褌邪锌芯褕褍泻"
+msgid "Bad backup file"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"校 薪械泻邪褌芯褉褘褏 胁褘锌邪写泻邪褏 %s 写褉邪泄胁械褉褍 锌邪褌褉褝斜薪邪 薪械泻邪褌芯褉邪褟 写邪写邪褌泻芯胁邪褟 i薪褎邪褉屑邪褑褘褟,\n"
-"邪谢械 蟹胁褘褔邪泄薪邪 谐褝褌邪 薪械 锌邪褌褉邪斜褍械褑褑邪. 笑i 薪械 卸邪写邪械褑械 胁褘 蟹邪写邪褑褜 写谢褟 褟谐芯\n"
-"写邪写邪褌泻芯胁褘褟 芯锌褑褘i, 褑i 写邪蟹胁芯谢i褑械 写褉邪泄胁械褉褍 锌褉邪褌褝褋褑i褉邪胁邪褑褜 屑邪褕褘薪褍\n"
-"褳 锌芯褕褍泻邪褏 薪械邪斜褏芯写薪邪泄 i薪褎邪褉屑邪褑褘i? 袦邪谐褔褘屑邪, 褌褝褋褑i褉邪胁邪薪薪械 锌褉褘胁褟写蟹械\n"
-"写邪 褋锌褘薪械薪薪褟 泻邪屑锌'褞褌褝褉褍, 邪谢械 褟薪芯 薪i褔芯谐邪 薪械 褋邪锌褋褍械."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "携泻i 写褉邪泄胁械褉 %s 锌邪褋锌褉邪斜邪胁邪褑褜?"
-
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module options:"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Pipe into command"
msgstr ""
-"袙褘 薪械 屑芯卸邪褑械 蟹邪写邪褑褜 芯锌褑褘i 屑芯写褍谢褞 %s.\n"
-"袨锌褑褘i - 褍 褎邪褉屑邪褑械 ``i屑褟=蟹薪邪褔褝薪薪械 i屑褟2=蟹薪邪褔褝薪薪械2 ...''.\n"
-"袧邪锌褉褘泻谢邪写, ``io=0x300 irq=7''"
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"袩褝褳薪邪械 邪斜褋褌邪谢褟胁邪薪薪械 锌邪褌褉邪斜褍械 泻邪屑械褉褑褘泄薪褘褏 写褉邪泄胁械褉邪褳 写谢褟 锌褉邪褑褘.\n"
+"效邪褋褌泻芯胁邪 褨薪褎邪褉屑邪褑褘褞 锌褉邪 褨褏 屑芯卸薪邪 邪褌褉褘屑邪褑褜 褌褍褌: %s"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(屑芯写褍谢褜 %s)"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "校褋褌邪谢褟胁邪薪薪械 写褉邪泄胁械褉褍 写谢褟 %s 泻邪褉褌褘 %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "袚谢. 邪锌i褋邪薪薪械 邪斜褋褌邪谢褟胁邪薪薪褟"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "笑i 褢褋褑褜 褍 胁邪褋 %s i薪褌褝褉褎械泄褋?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "笑i 褢褋褑褜 褍 胁邪褋 i薪褕褘?"
-
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "袟薪芯泄写蟹械薪褘 %s %s i薪褌褝褉褎械泄褋褘"
+msgid "Detecting devices..."
+msgstr "袙褘蟹薪邪褔褝薪薪械 锌褉褘谢邪写邪褳..."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢邪褳"
-
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Haiti"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Description of the fields:\n"
+"\n"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%d comma separated numbers"
+msgid "the name of the CPU"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "袧褍屑邪褉 褌褝谢械褎芯薪褍"
+msgid "Refreshing printer data..."
+msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
-#: ../../network/adsl.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "You must also format %s"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "袘褍写蟹褜褑械 褍胁邪卸谢i胁褘. 袚褝褌褍褞 邪锌械褉邪褑褘褞 薪械谢褜谐邪 邪写屑褟薪i褑褜"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "褋械褉胁械褉"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
-#: ../../network/adsl.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "袚谢."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "use dhcp"
+msgid "Use Expect for SSH"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "use pptp"
-msgstr "胁褘泻邪褉褘褋褌芯褳胁邪褑褜 pppoe"
+msgid "Poland"
+msgstr "I褋谢邪薪写褋泻i"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "胁褘泻邪褉褘褋褌芯褳胁邪褑褜 pppoe"
+msgid "Importance: %s\n"
+msgstr "袟薪邪褔薪邪褋褑褜: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "I薪褕褘褟 泻褉邪i薪褘"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Everything (no firewall)"
-msgstr "袔褋褢 褋泻邪薪褎i谐褍褉邪胁邪薪邪!"
+msgid "Other ports"
+msgstr "I薪褕褘褟 泻褉邪i薪褘"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "SMBus controllers"
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "褋械褌泻邪胁邪褟 泻邪褉褌邪 薪械 蟹薪芯泄写蟹械薪邪"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "褋械褉胁械褉"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+msgid "Croatian"
+msgstr "啸邪褉胁邪褑泻i"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "I屑褟 写邪屑械薪褍"
+msgid "Use existing partition"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 i褋薪褍褞褔褘 褉邪蟹写蟹械谢"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "褋械褉胁械褉"
+msgid "Unable to contact mirror %s"
+msgstr "袟褉邪斜i褑褜 薪械邪泻褌褘褳薪褘屑 褋械褌泻邪胁邪械 蟹谢褍褔褝薪薪械"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "/Help/_About..."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "I屑褟 屑邪褕褘薪褘"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "I屑褟 屑邪褕褘薪褘"
+msgid "Remove user directories before restore."
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-"袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褋械褌泻邪胁褘 邪写邪锌褌邪褉, 褟泻i 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 "
-"写邪谢褍褔褝薪薪褟 写邪 i薪褌褝褉薪褝褌"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the network interface"
-msgstr "袩邪蟹薪邪褔褑械 褋械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
-
-#: ../../network/ethernet.pm:1
-#, fuzzy, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "F00f bug"
msgstr ""
-"袧i 胁芯写薪褘 ethernet 褋械褌泻邪胁褘 邪写邪锌褌邪褉 褍 胁邪褕邪泄 褋i褋褌褝屑械 薪械 胁褘蟹薪邪褔邪薪褘. 袣邪谢i 谢邪褋泻邪, "
-"褋泻邪褉褘褋褌邪泄褑械 泻邪薪褎i谐褍褉邪褑褘泄薪褘 i薪褋褌褉褍屑褝薪褌."
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s"
+msgstr "小械褉胁械褉 XFree86 %s"
#: ../../network/ethernet.pm:1
#, c-format
@@ -8446,1746 +8291,1690 @@ msgstr ""
"携泻i dhcp 泻谢i械薪褌 胁褘 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?\n"
"袩邪 蟹屑芯褳褔邪薪薪褞, 谐褝褌邪 dhcp-client"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "袣邪褉褌邪 ISDN PCI 薪械 蟹薪芯泄写蟹械薪邪. 袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 薪邪 薪邪褋褌褍锌薪褘屑 褝泻褉邪薪械."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"袙褘蟹薪邪褔邪薪邪 ISDN PCI 泻邪褉褌邪, 邪谢械 薪械胁褟写芯屑褘 褟械 褌褘锌. 袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 PCI "
-"泻邪褉褌褍 薪邪 薪邪褋褌褍锌薪褘屑 褝泻褉邪薪械."
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "携泻邪褟 褳 胁邪褋 ISDN 泻邪褉褌邪?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
+msgid "Domain Name:"
+msgstr "I屑褟 写邪屑械薪褍"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "袗写屑褟薪i褑褜"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "袩褉邪褑褟谐薪褍褑褜"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-"\n"
-"袣邪谢i 胁褘 屑邪械褑械 ISA 泻邪褉褌褍, 胁械谢i褔褘薪i 薪邪 薪邪褋褌褍锌薪褘屑 褝泻褉邪薪械 锌邪胁i薪薪褘 斜褘褑褜 "
-"褋邪锌褉邪褳写薪褘屑i.\n"
-"\n"
-"袣邪谢i 胁褘 屑邪械褑械 PCMCIA 泻邪褉褌褍, 胁褘 锌邪胁i薪薪褘 胁械写邪褑褜 irq i io 胁邪褕邪泄 泻邪褉褌褘.\n"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "I don't know"
-msgstr "袧械 胁褟写芯屑邪"
+msgid "Looking for available packages..."
+msgstr "袩褉邪谐谢褟写 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Init Message"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Rescue partition table"
+msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "携泻i 褌褘锌 泻邪褉褌褘 胁褘 屑邪械褑械?"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "Cyprus"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "携泻i 锌褉邪褌邪泻芯谢 胁褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "袩邪写泻谢褞褔褝薪薪械"
+msgid "Remove from RAID"
+msgstr "袙褘写邪谢i褑褜 蟹 RAID"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"袩邪写泻谢褞褔褝薪薪械 \n"
-" 薪械 锌褉邪蟹 D-泻邪薪邪谢 (胁褘谢褍褔邪薪褘褟 泻邪薪邪谢褘)"
+"袚褝褌褘 锌邪褉芯谢褜 蟹邪薪邪写褌邪 锌褉芯褋褌褘 (褟谐芯 写邪褳卸褘薪褟 锌邪胁i薪薪邪 斜褘褑褜 薪械 屑械薪械泄 蟹邪 %d 谢i褌邪褉邪褳)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "袝褳褉芯锌邪 (EDSS1)"
+msgid "Configuration Wizards"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "袝褳褉芯锌邪 (EDSS1)"
+msgid "ISDN connection"
+msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "primary"
msgstr ""
-"袗斜褟褉褘褑械 胁邪褕邪谐邪 锌褉邪胁邪泄写邪褉邪.\n"
-"泻邪谢i 褟谐芯 薪褟屑邪 褳 谐褝褌褘屑 褋锌i褋械, 邪斜褟褉褘褑械 褌褘锌 ``I薪褕褘''"
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "External ISDN modem"
-msgstr "校薪褍褌褉邪薪邪褟 ISDN 泻邪褉褌邪"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "校薪褍褌褉邪薪邪褟 ISDN 泻邪褉褌邪"
-
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Network Configuration Wizard"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "袟薪芯泄写蟹械薪邪 褋褨褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻褨 (firewall)!"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "袟薪芯泄写蟹械薪邪 褋褨褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻褨 (firewall)!"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We recommand the light configuration.\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "效邪泻邪械褑褑邪"
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Skip"
+msgstr "袩褉邪锌褍褋褑i褑褜"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "校褋褌邪谢褢褳泻邪"
+msgid "Niue"
+msgstr "谐邪谢褜褕褌褍泻"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
+"袗泻褌褘胁i蟹邪胁邪褑褜/写褝邪泻褌褘胁i蟹邪胁邪褑褜 褍褋械 褋械褌泻邪胁褘褟 i薪褌褝褉褎械泄褋褘, 褋泻邪薪褎i谐褍褉邪胁邪薪褘褟 写谢褟\n"
+"褋褌邪褉褌褍 锌褉褘 蟹邪谐褉褍蟹褑褘 褋i褋褌褝屑褘."
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "孝邪斜谢i褑邪"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Second DNS Server (optional)"
-msgstr "袛褉褍谐i 褋械褉胁械褉 DNS:"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "First DNS Server (optional)"
-msgstr "袩械褉褕褘 褋械褉胁械褉 DNS"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "I屑褟 写邪屑械薪褍"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Script-based"
-msgstr "薪邪 邪褋薪芯胁械 褋泻褉褘锌褌褍"
+msgid "important"
+msgstr "胁邪卸薪邪"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Terminal-based"
-msgstr "薪邪 邪褋薪芯胁械 褌褝褉屑i薪邪谢褍"
+msgid "Total Progress"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "I屑褟 (login ID)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Users"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "袧褍屑邪褉 褌褝谢械褎芯薪褍"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Aruba"
+msgstr "Grub"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection name"
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Preparing bootloader..."
+msgstr "袩邪写褉褘褏褌芯褳泻邪 蟹邪谐褉褍蟹褔褘泻邪"
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "袩邪褉邪屑械褌褉褘 泻邪屑褍褌邪胁邪薪邪谐邪 蟹谢褍褔褝薪薪褟 (Dialup)"
+msgid "Gateway (e.g. %s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
+msgid "The passwords do not match"
+msgstr "袩邪褉芯谢i 薪械 褋褍锌邪写邪褞褑褜"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "Frequency (MHz)"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+msgid "the number of the processor"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
+msgid "Hardware clock set to GMT"
+msgstr "袙邪褕 褋i褋褌褝屑薪褘 谐邪写蟹i薪薪i泻 褍褋褌邪谢褟胁邪薪褘 薪邪 GMT?"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Give a file name"
+msgstr "校谢邪褋薪邪械 i屑褟"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network configuration"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "袙褘 卸邪写邪械褑械, 泻邪斜 谐褝褌邪械 蟹谢褍褔褝薪薪械 褋褌邪褉褌邪胁邪谢邪 锌褉褘 蟹邪谐褉褍蟹褑褘?"
+msgid "Please choose the port that your printer is connected to."
+msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
+msgid "Change Cd-Rom"
+msgstr "袟屑褟薪i褑褜 锌邪屑械褉褘 褝泻褉邪薪褍"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "Paraguay"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "袗斜褟褉褘褑械 i薪褋褌褉褍屑械薪褌, 褟泻i 卸邪写邪械褑械 褋泻邪褉褘褋褌邪褑褜"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ethernet card(s) detected"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "LAN connection"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Cable connection"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "detected %s"
+msgid "There's no known driver for your sound card (%s)"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "ISDN connection"
-msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
+msgid "force"
+msgstr "袩械褉邪薪芯褋"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+msgid "Exit"
+msgstr "Ext2"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Normal modem connection"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "袙褘蟹薪邪褔褝薪薪械 锌褉褘谢邪写邪褳..."
+msgid "Estonian"
+msgstr "协褋褌芯薪褋泻i"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Expert Mode"
-msgstr "协泻褋锌械褉褌"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache - 谐褝褌邪 World Wide Web 褋械褉胁械褉. 衼薪 胁褘泻邪褉褘褋褌芯褳蟹胁邪械褑邪 写谢褟 邪斜褋谢褍谐芯褳胁邪薪薪褟\n"
+"HTML 褎邪泄谢邪褳 i CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Use auto detection"
+msgid "Add/Del Clients"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the profile to configure"
-msgstr "袗斜褟褉褘褑械 邪褋薪芯褳薪邪谐邪 泻邪褉褘褋褌邪谢褜薪i泻邪:"
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Choose the network interface"
+msgstr "袩邪蟹薪邪褔褑械 褋械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
-#: ../../network/netconnect.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "Unknown Model"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "CD/DVD burners"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/interactive.pm:1
+#, c-format
msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"\n"
-"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
+"袟邪谐褉褍蟹邪褔薪褘 褉邪蟹写蟹械谢 锌邪 写邪屑邪褳谢械薪薪褞\n"
+" (写谢褟 蟹邪谐褉褍蟹泻i MS-DOS, 邪 薪械 写谢褟 lilo)\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
+msgid "choose image"
+msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Disconnect"
-msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
+msgid "Firewalling configuration detected!"
+msgstr "袟薪芯泄写蟹械薪邪 褋褨褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻褨 (firewall)!"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Connect"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"\n"
-"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
+msgid "Updating package selection"
+msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 屑邪薪褑i褉邪胁邪褑褜 胁i褉褌褍邪谢褜薪褍褞 锌褉褘谢邪写褍 %s?"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"\n"
-"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "携泻 胁褘 锌谢邪薪褍械褑械 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
+msgid "the number of buttons the mouse has"
+msgstr "2 泻薪芯锌泻i"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"\n"
-"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "You are currently connected to the Internet."
-msgstr "携泻 胁褘 锌谢邪薪褍械褑械 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
+msgid "Replay"
+msgstr "袩械褉邪蟹邪谐褉褍蟹i褑褜"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Proxy 锌邪胁i薪械薪 斜褘褑褜 http://..."
+msgid "Backup other files"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../network/network.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy 锌邪胁i薪械薪 斜褘褑褜 http://..."
+msgid "No floppy drive available"
+msgstr "袛褘褋泻邪胁芯写 薪械写邪褋褌褍锌薪褘"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "TV norm:"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Proxies configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 proxy 泻褝褕褍褞褔褘褏 褋械褉胁械褉邪褳"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP 邪写褉邪褋 锌邪胁i薪械薪 斜褘褑褜 褍 褎邪褉屑邪褑械 1.2.3.4"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "32 MB"
+msgstr "32 袦斜"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP 邪写褉邪褋 锌邪胁i薪械薪 斜褘褑褜 褍 褎邪褉屑邪褑械 1.2.3.4"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (new)"
+msgstr "袥i褌芯褳褋泻i AZERTY (薪芯胁褘)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Gateway device"
-msgstr "袩褉褘谢邪写邪-褕谢褞蟹"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"袙褘 邪斜褉邪谢i RAID 褉邪蟹写蟹械谢 褟泻 泻邪褉邪薪褢胁褘.\n"
+"袧褟屑邪 蟹邪谐褉褍蟹褔褘泻褍, 褟泻i 斜 蟹邪谐褉褍蟹i褳褋褟 斜械蟹 /boot 褉邪蟹写蟹械谢邪.\n"
+"袛邪写邪泄褑械 褉邪蟹写械谢 /boot, 泻邪谢i 谢邪褋泻邪."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "Previous"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS 褋械褉胁械褉"
+msgid "Other OS (MacOS...)"
+msgstr "I薪褕邪褟 袗小 (MacOS,...)"
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "To activate the mouse,"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+
+#: ../../install_interactive.pm:1
#, c-format
+msgid "Bringing up the network"
+msgstr "袛邪谢褍褔褝薪薪械 写邪 褋械褌泻i"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "袙褘 屑芯卸邪褑械 邪斜褉邪褑褜 褨薪褕褘褟 屑芯胁褘, 褟泻i褟 斜褍写褍褑褜 写邪褋褌褍锌薪褘 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"校胁褟写蟹i褑械 i屑褟 褋胁邪褢泄 屑邪褕褘薪褘 (host).\n"
-"I屑褟 胁邪褕邪泄 屑邪褕褘薪褘 锌邪胁i薪薪邪 斜褘褑褜 蟹邪写邪写蟹械薪邪 锌芯褳薪邪褋褑褞,\n"
-"薪邪锌褉褘泻谢邪写 ``mybox.mylab.myco.com''.\n"
-"袙褘 屑芯卸邪褑械 褌邪泻褋邪屑邪 褳胁械褋褑i IP 邪写褉邪褋 褕谢褞蟹褍, 泻邪谢i 褢薪 褍 胁邪褋 褢褋褑褜."
+"袧邪 胁邪褕褘屑 写褘褋泻褍 斜褘谢芯 蟹薪芯泄写蟹械薪邪 斜芯谢械泄 蟹邪 邪写蟹褨薪 褉邪蟹写蟹械谢\n"
+"Windows. 袣邪谢褨 谢邪褋泻邪, 邪斜褟褉褘褑械 褌芯泄, 锌邪屑械褉 褟泻芯谐邪 卸邪写邪械褑械 蟹屑褟薪褨褑褜, "
+"泻邪斜褍褋褌邪谢褟胁邪褑褜\n"
+"褋褨褋褌褝屑褍 Mandrake Linux.\n"
+"\n"
+"\n"
+"袛谢褟 i褎邪褉屑邪褑褘褨, 泻芯卸薪褘 褉邪蟹写蟹械谢 邪写蟹薪邪褔邪薪褘 褟泻: \"Linux 褨屑褟\", \"Windows\n"
+"褨屑褟\" \"C胁芯泄褋褌胁褘\".\n"
+"\"Linux 袉屑褟\" 泻邪写邪胁邪薪邪 褌邪泻 - \"褌褘锌 写褘褋泻褍\", \"薪褍屑邪褉 写褘褋泻褍\",\"薪褍屑邪褉 "
+"褉邪蟹写蟹械谢褍\n"
+"(薪邪锌褉褘泻谢邪写, \"hda1\").\n"
+"\n"
+"\n"
+"\"孝褘锌 写褘褋泻褍\" 泻邪写邪胁邪薪褘 褟泻 \"hd\", 泻邪谢褨 谐褝褌邪 IDE, 褨 \"sd\" 泻邪谢褨 SCSI.\n"
+"\n"
+"\"袧褍屑邪褉 写褘褋泻褍\" - 褋褨屑胁邪谢 锌邪褋谢褟 \"hd\" 褑褨 \"sd\". 袛谢褟 IDE 写褘褋泻邪褳:\n"
+" * \"邪\" \"master\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE \n"
+" * \"b\" \"slave\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
+" * \"c\" \"master\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
+" * \"d\" \"slave\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
+"\n"
+"\n"
+"袛谢褟 SCSI 写褘褋泻邪褳 - \"a\" 谐褝褌邪 \"锌械褉褕邪褋薪褘 卸芯褉褋泻褨 写褘褋泻\", \"b\" - \"写褉褍谐邪褋薪褘 "
+"卸芯褉褋泻褨 写褘褋泻\", 褨 谐.写.\n"
+"\n"
+"\"Windows 袉屑褟\" 褋褨屑胁邪谢 胁邪褕邪谐邪 写褘褋泻褍 褳 Windows (锌械褉褕褘 写褘褋泻 褑褨\n"
+"褉邪蟹写蟹械谢 锌邪蟹薪邪褔邪械褑褑邪 褟泻 \"C:\")."
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Tanzania"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "袩邪写谢褨泻 屑械卸邪褳 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 FAT"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"\n"
+"Backup Sources: \n"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP 邪写褉邪褋 锌邪胁i薪械薪 斜褘褑褜 褍 褎邪褉屑邪褑械 1.2.3.4"
+msgid "Content of the file"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "小褌胁邪褉褘褑褜 蟹邪谐褉. 写褘褋泻"
+msgid "Authentication LDAP"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+msgid "Profile "
+msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "transmitted"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "I屑褟 屑邪褕褘薪褘"
+msgid "Palestine"
+msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask"
-msgstr "袦邪褋泻邪 褋械褌泻i"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP 邪写褉邪褋"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "袗褳褌邪屑邪褌褘褔薪褘 IP"
+msgid "Here is the full list of keyboards available"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "小械褉胁械褉 XFree86: %s\n"
+msgid "Theme name"
+msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻邪胁邪泄 锌褉褘谢邪写褘 %s"
+msgid "/_Help"
+msgstr "/_袛邪锌邪屑芯谐邪"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"袣邪谢i 谢邪褋泻邪, 褍胁褟写蟹i褑械 IP 泻邪薪褎i谐褍褉邪褑褘褞 写谢褟 胁邪褕邪泄 屑邪褕褘薪褘.\n"
-"袣芯卸薪褘 锌褍薪泻褌 锌邪胁i薪械薪 斜褘褑褜 蟹邪锌芯褳薪械薪褘 褟泻 IP 邪写褉邪褋 褳 写蟹械褋褟褌泻芯胁邪-泻褉芯锌泻邪胁邪泄 \n"
-"薪邪褌邪褑褘i (薪邪锌褉褘泻谢邪写, 1.2.3.4)."
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "the width of the progress bar"
msgstr ""
-#: ../../network/shorewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cook Islands"
msgstr ""
-"校胁邪谐邪! 袟薪芯泄写蟹械薪邪 褨褋薪褍褞褔邪褟 褋i褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻i (firewall). 袙邪屑 屑邪谐褔褘屑邪 "
-"褋锌邪褌褉褝斜褨褑褑邪 褋泻邪褉褝泻褌邪胁邪褑褜 褟械 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟."
-#: ../../network/shorewall.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "袟薪芯泄写蟹械薪邪 褋褨褋褌褝屑邪 褋械褌泻邪胁邪泄 斜褟褋锌械泻褨 (firewall)!"
+msgid "Formatting partition %s"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢褍 %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "I屑褟 屑邪褕褘薪褘"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Account Password"
-msgstr "袩邪褉芯谢褜 写谢褟 褳胁邪褏芯写褍"
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "I屑褟 写谢褟 褳胁邪褏芯写褍 (i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍)"
+msgid "Cancel"
+msgstr "袗写屑械薪邪"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Searching for configured scanners ..."
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "袟 泻芯谢邪屑"
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Videocard"
+msgstr "袙i写褝邪-褉褝卸褘屑"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialing mode"
-msgstr "袪褝卸褘屑 蟹谢褍褔褝薪薪褟"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "袙褘斜邪褉 泻谢邪胁i褟褌褍褉褘"
+msgid "Remove Selected"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 锌褉邪胁邪泄写邪褉褍"
+msgid "/Autodetect _modems"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 锌褉邪胁邪泄写邪褉褍"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "袧褍屑邪褉 褌褝谢械褎芯薪褍 锌褉邪胁邪泄写邪褉邪"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "I屑褟 锌褉邪胁邪泄写邪褉褍, 薪邪锌褉褘泻谢邪写 锌褉邪胁邪泄写邪褉.net"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Your personal phone number"
-msgstr "袙邪褕 邪褋邪斜i褋褌褘 褌褝谢械褎芯薪薪褘 薪褍屑邪褉"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 泻邪褉褌褘"
+msgid "Remove printer"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 泻邪褉褌褘"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"校袙袗袚袗!\n"
+"\n"
+"DrakX 蟹邪褉邪蟹 锌邪胁i薪械薪 蟹屑褟薪i褑褜 锌邪屑械褉 胁邪褕邪谐邪 褉邪蟹写蟹械谢邪 Windows.\n"
+"袘褍写蟹褜褑械 褳胁邪卸谢i胁褘: 谐褝褌邪褟 邪锌械褉邪褑褘褟 薪械斜褟褋锌械褔薪邪. 袣邪谢i 胁褘 褟褕褔褝 薪械 蟹褉邪斜i谢i \n"
+"褉褝蟹械褉胁芯胁褍褞 泻芯锌i褞 写邪写蟹械薪褘褏, 褌芯 褋锌邪褔邪褌泻褍 锌邪泻i薪褜褑械 锌褉邪谐褉邪屑褍 褳褋褌邪谢褟胁邪薪薪褟,"
+"胁褘泻邪薪邪泄褑械 scandisk i defrag 薪邪 谐褝褌褘屑 褉邪蟹写械谢械, 蟹褉邪斜i褑械 褉褝蟹械褉胁芯胁褍褞 泻芯锌i褞\n"
+"写邪写蟹械薪褘褏 i 褌芯谢褜泻i 锌芯褌褘屑 蟹薪芯褳 胁褟褉薪i褑械褋褟 写邪 锌褉邪谐褉邪屑褘 褳褋褌邪谢褟胁邪薪薪褟.\n"
+"袣邪谢i 锌邪写褉褘褏褌邪胁邪谢i褋褟, 薪邪褑i褋薪i褑械 Ok."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO 泻邪褉褌褘"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "袗写褉邪褋褘 锌邪屑褟褑褨 泻邪褉褌褘 (DMA)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ 泻邪褉褌褘"
+msgid "Other"
+msgstr "袉薪褕褘褟"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "袣邪谢i 谢邪褋泻邪, 蟹邪锌芯褳薪i褑械 褑i 锌邪蟹薪邪褔褑械 锌芯谢械 薪i卸褝泄"
+msgid "Default"
+msgstr "袩邪 写邪屑邪褳谢械薪薪褞"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 写邪谢褍褔褝薪薪褟 写邪 I薪褌褝褉薪褝褌褍"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "Button 2 Emulation"
msgstr ""
-"\n"
-"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid "type1inst building"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "携泻 胁褘 锌谢邪薪褍械褑械 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
+msgid "Abiword"
+msgstr "袗写屑褟薪i褑褜"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Testing your connection..."
-msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "笑i 卸邪写邪械褑械 蟹邪褉邪蟹 锌邪褋锌褉邪斜邪胁邪褑褜 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-
-#: ../../partition_table/raw.pm:1
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
+msgid "choose image file"
+msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (袩邪 写邪屑邪褳谢械薪薪褞)"
+msgid "X server"
+msgstr "X 褋械褉胁械褉"
-#: ../../printer/cups.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP 褋械褉胁械褉邪 SMB"
+msgid "Domain Admin User Name"
+msgstr "I屑褟 写邪屑械薪褍"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
-#, c-format
-msgid "CUPS"
-msgstr ""
+msgid "There was an error while scanning for TV channels"
+msgstr "袗褌褉褘屑邪谢邪褋褟 锌邪屑褘谢泻邪 褳锌邪褉邪写泻邪胁邪薪薪褟 锌邪泻械褌邪褳:"
-#: ../../printer/cups.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "US keyboard (international)"
+msgstr "US 泻谢邪胁i褟褌褍褉邪 (屑i卸薪邪褉芯写薪邪褟)"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(屑芯写褍谢褜 %s)"
+msgid "Not installed"
+msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "LAN connection"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPRng"
+msgid "/File/-"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "Italian"
+msgstr "I褌邪谢褜褟薪褋泻i"
-#: ../../printer/data.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "LPD"
-msgstr ""
+msgid "Basic"
+msgstr "袩褉芯褋褌褘械"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ"
+msgid "Honduras"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
+msgid "pdq"
msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Card IO"
+msgstr "IO 泻邪褉褌褘"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unknown model"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "袩芯褉褌"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "I屑褟 屑邪褕褘薪褘"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "小械褌泻邪:"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "褋械褌泻邪胁邪褟 泻邪褉褌邪 薪械 蟹薪芯泄写蟹械薪邪"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", using command %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "\t-Network by FTP.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Russian (Yawerty)"
+msgstr "袪褍褋泻i (携-袙-袝-袪-孝-袠)"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "URI 锌褉褘薪褌褝褉褍"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "袩邪屑褘谢泻邪 蟹邪锌i褋褍 褳 褎邪泄谢 %s"
+msgid "/_Quit"
+msgstr "袙褘褏邪写"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", multi-function device"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Graphics memory: %s kB\n"
+msgstr "袙i写褝邪锌邪屑褟褑褜: %s 袣斜\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid "access to compilation tools"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", USB printer \\#%s"
-msgstr ""
+msgid "Please select data to restore..."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"袣邪谢i 胁褘 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 boot 胁芯斜谢邪褋褑褜, 褌邪写褘 褉邪蟹屑褟褋褑i褑械 褟械\n"
+" 薪械 写邪谢械泄 蟹邪 2048 褋械泻褌邪褉芯褳 邪写 锌邪褔邪褌泻褍 写褘褋泻邪"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+msgid "Standard test page"
+msgstr "小褌邪薪写邪褉褌薪褘"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr ""
+msgid "Create"
+msgstr "小褌胁邪褉褘褑褜"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "URI 锌褉褘薪褌褝褉褍"
+msgid "What"
+msgstr "效邪泻邪泄褑械"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "袗褌褉褘屑邪谢邪褋褟 锌邪屑褘谢泻邪 褳锌邪褉邪写泻邪胁邪薪薪褟 锌邪泻械褌邪褳:"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "小械褌泻邪胁褘 锌褉褘薪褌褝褉 (TCP/Socket)"
+msgid "Bulgarian (BDS)"
+msgstr "袘邪谢谐邪褉褋泻i"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 lpd"
+msgid "Disable Server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 CUPS"
+msgid "Filesystem encryption key"
+msgstr "孝褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘:"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local printer"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
+msgid "Save theme"
+msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "袩褉褘薪褌褝褉"
+msgid "group"
+msgstr "袩褉邪褑芯褳薪邪褟 谐褉褍锌邪"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
+msgid "Auto Install"
+msgstr "校褋褌邪谢褢褳泻邪"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Network Configuration Wizard"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
+msgid "Removable media automounting"
+msgstr "袗褳褌邪屑邪薪褑i褉邪胁邪薪薪械 蟹屑械薪薪褘褏 薪邪蟹邪锌邪褕胁邪谢褜薪褨泻邪褳"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
+msgid "Printing"
+msgstr "袩褉褘薪褌褝褉"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "小褌胁邪褉褝薪薪械 薪芯胁邪谐邪 褉邪蟹写蟹械谢褍"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "褋械褉胁械褉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgid "unknown"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "袪褍褕褑械 泻芯谢邪屑 屑褘褕褘!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+msgid "Automatic IP"
+msgstr "袗褳褌邪屑邪褌褘褔薪褘 IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer options"
-msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
+#, fuzzy, c-format
+msgid "Configuration of a remote printer"
+msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
+msgid "Moldova"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Proxy 锌邪胁i薪械薪 斜褘褑褜 http://..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
msgstr "I屑褟 写褉褍泻邪褉泻i"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Close"
-msgstr "袩芯褉褌 屑褘褕褘"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../modules/interactive.pm:1
+#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"袙褘 薪械 屑芯卸邪褑械 蟹邪写邪褑褜 芯锌褑褘i 屑芯写褍谢褞 %s.\n"
+"袨锌褑褘i - 褍 褎邪褉屑邪褑械 ``i屑褟=蟹薪邪褔褝薪薪械 i屑褟2=蟹薪邪褔褝薪薪械2 ...''.\n"
+"袧邪锌褉褘泻谢邪写, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "袙褘泄褋褑i 斜械蟹 蟹邪锌i褋褍 褌邪斜谢i褑褘 褉邪蟹写蟹械谢邪褳"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Normal Mode"
-msgstr "袟胁褘褔邪泄薪褘"
+msgid "Installing packages..."
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dutch"
+msgstr "袚邪谢邪薪写褋泻i"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
+msgid "The following packages need to be installed:\n"
+msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 写邪写邪薪褘 写邪 褋i褋褌褝屑褘"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr ""
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
+msgid "service setting"
+msgstr "锌褉褘谢邪写邪"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "袩邪 胁褘斜邪褉褍"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
+"肖邪泄谢 褍卸芯 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 i薪褕邪泄 胁i褉褌褍邪谢褜薪邪泄 褋i褋褌褝屑邪泄. 袣邪谢i 谢邪褋泻邪, \n"
+"邪斜褟褉褘褑械 i薪褕褍褞 薪邪蟹胁褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"孝褍褌 蟹屑褟褕褔邪褞褑褑邪 褔褝褉谐i 写褉褍泻褍.\n"
-"袙褘 屑芯卸邪褑械 写邪写邪褑褜 褟褕褔褝, 邪谢褜斜芯 蟹屑褟薪i褑褜 i褋薪褍褞褔褘褟."
+msgid "Latvia"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
+msgid "No known driver"
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 袦斜"
+
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
+msgid "Configure Local Area Network..."
+msgstr "袧邪褋褌褉芯泄泻邪 谢邪泻邪谢褜薪邪泄 褋械褌泻i"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
+msgid "Information"
+msgstr "I薪褎邪褉屑邪褑褘褟"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "袙褘斜邪褉 褌褘锌褍 蟹谢褍褔褝薪薪褟 锌褉褘薪褌褝褉褍"
+msgid "No network card"
+msgstr "褋械褌泻邪胁邪褟 泻邪褉褌邪 薪械 蟹薪芯泄写蟹械薪邪"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+msgid "Which filesystem do you want?"
+msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 泻薪芯锌泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
+msgid "Detailed information"
+msgstr "I薪褎邪褉屑邪褑褘褟"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "Malta"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "This floppy is not FAT formatted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "袩邪褉邪薪邪i写邪谢褜薪褘"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "high"
-msgstr "袙褘褋芯泻i"
+msgid "Graphic Card"
+msgstr "袙i写褝邪泻邪褉褌邪"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "袙褘谢i褔褝薪薪械 屑械卸邪褳 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 锌褉邪胁邪泄写邪褉褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Cameroon"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"袙褘 屑芯卸邪褑械 褑褟锌械褉 褉邪蟹斜i褑褜 胁邪褕 写褘褋泻 %s\n"
+"袩邪 蟹邪泻邪薪褔褝薪薪i 薪械 蟹邪斜褍写蟹褜褑械褋褟 蟹邪褏邪胁邪褑褜 蟹屑褟薪械薪薪i, 褋泻邪褉褘褋褌邪褳褕褘 `w'"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
+msgid "Close"
+msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "袦邪薪i褌芯褉 锌邪泻褍谢褜 薪械 薪邪褋褌褉芯械薪褘"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
+"袛谢褟 薪邪褋褌褉芯泄泻i 邪写写邪谢械薪邪泄 褔邪褉谐i 写褉褍泻褍 胁邪屑 锌邪褌褉褝斜薪邪\n"
+"锌邪蟹薪邪褔褘褑褜 i屑褟 邪写写邪谢械薪邪谐邪 褋械褉胁械褉邪 i i屑褟 褔邪褉谐i 写褉褍泻褍,\n"
+"褍 褟泻褍褞 邪写写邪谢械薪褘 褋械褉胁械褉 斜褍写蟹械 邪写锌褉邪褳谢褟褑褜 蟹邪写邪薪薪i."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "New printer name"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+msgid "Iceland"
+msgstr "I褋谢邪薪写褋泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "stopped"
+msgstr "袛邪谢褍褔褘褑褜"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "袪邪蟹谐邪褉薪褍褑褜 写褉褝胁邪"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Expert Mode"
+msgstr "协泻褋锌械褉褌"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "褋械褌泻邪胁邪褟 泻邪褉褌邪 薪械 蟹薪芯泄写蟹械薪邪"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS 褋械褉胁械褉:"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> 锌邪屑i卸 褝谢械屑械薪褌邪屑i | <Space> 胁褘斜邪褉 | <F12> 薪邪褋褌褍锌薪褘 褝泻褉邪薪 "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍"
+msgid "Subnet:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+msgid "Zimbabwe"
+msgstr "屑芯卸邪 斜褘褑褜"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+msgid "Please enter the host name or IP."
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+msgid "When"
+msgstr "袟 泻芯谢邪屑"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+msgid "Second DNS Server (optional)"
+msgstr "袛褉褍谐i 褋械褉胁械褉 DNS:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Finland"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "袩邪褉邪屑械褌褉褘 谐谢褘斜i薪i 泻芯谢械褉褍: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "袙褘 薪械 屑芯卸邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍. 携谐芯 锌邪褌褉褝斜薪邪 邪斜薪邪胁i褑褜"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "小谢邪胁械薪褋泻i"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
msgstr ""
+"校胁褟写蟹i褑械 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"校 屑械薪褞 屑邪褞褑褑邪 薪邪褋褌褍锌薪褘褟 锌褍薪泻褌褘.\n"
+"袙褘 屑芯卸邪褑械 写邪写邪褑褜 褟褕褔褝, 邪谢褜斜芯 蟹屑褟薪i褑褜 i褋薪褍褞褔褘褟."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"袣邪屑邪薪写褘, 褟泻i褟 胁褘泻芯薪胁邪褞褑褑邪, 褎i泻褋褍褞褑褑邪 锌邪 泻邪屑邪薪写蟹械 i 褔邪褋械 褟械 胁褘泻邪薪邪薪薪褟\n"
+"i 胁褘泻芯薪胁邪褞褑褑邪 谐褉褍锌褘 泻邪屑邪薪写, 泻邪谢i 蟹邪谐褉褍蟹泻邪 锌邪屑褟褑i 薪i卸褝泄 写邪褋褌邪褌泻芯胁邪泄."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"孝褝褋褌邪胁褘褟 褋褌邪褉芯薪泻i 邪写锌褉邪褳谢械薪褘 写褝屑邪薪褍 写褉褍泻褍.\n"
-"袩械褉邪写 褌褘屑, 褟泻 锌褉褘薪褌褝褉 蟹邪锌褉邪褑褍械, 屑芯卸邪 锌褉邪泄褋褑i 锌褝褳薪褘 褔邪褋.\n"
-"衼薪 锌褉邪褑褍械 薪邪褉屑邪谢褜薪邪?"
+msgid "Installing SANE packages..."
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+msgid "boot disk creation"
+msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
msgstr ""
-"孝褝褋褌邪胁褘褟 褋褌邪褉芯薪泻i 邪写锌褉邪褳谢械薪褘 写褝屑邪薪褍 写褉褍泻褍.\n"
-"袩械褉邪写 褌褘屑, 褟泻 锌褉褘薪褌褝褉 蟹邪锌褉邪褑褍械, 屑芯卸邪 锌褉邪泄褋褑i 锌褝褳薪褘 褔邪褋.\n"
-"小褌邪褌褍褋 写褉褍泻褍:\n"
-"%s\n"
-"\n"
-"衼薪 锌褉邪褑褍械 薪邪褉屑邪谢褜薪邪?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
+msgid "Change type"
+msgstr "袟屑褟薪i褑褜 褌褘锌 褉邪蟹写蟹械谢褍"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "校褋褌邪谢褟胁邪薪薪械 SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "小褌邪薪写邪褉褌薪褘"
+#: ../../install_messages.pm:1
+#, c-format
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"袙i薪褕褍械屑, 褍褋褌邪谢褟胁邪薪薪械 蟹邪胁械褉褕邪薪邪.\n"
+"袙褘写邪谢i褑械 蟹邪谐褉褍蟹邪褔薪褘 写褘褋泻 i 薪邪褑i褋薪i褑械 enter 写谢褟 锌械褉邪蟹邪谐褉褍蟹泻i.\n"
+"\n"
+"\n"
+"袟邪 i薪褎邪褉屑邪褑褘褟泄 锌褉邪 蟹屑褟薪械薪薪i 写邪写蟹械薪邪谐邪 胁褘锌褍褋泻褍 Mandrake Linux,\n"
+"蟹胁褟褉褌邪泄褑械褋褜 薪邪 \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"I薪褎邪褉屑邪褑褘褟 锌邪 薪邪褋褌褉芯泄泻械 胁邪褕邪泄 褋i褋褌褝屑褘 褢褋褌褜 褳 锌邪褋谢褟-褳褋褌邪谢褢胁邪褔薪邪泄\n"
+"谐谢邪胁械 胁邪褕邪谐邪 袛邪锌邪屑芯卸薪i泻邪 袣邪褉褘褋褌邪谢褜薪i泻褍 蟹 袗褎i褑褘泄薪邪谐邪 Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Print"
-msgstr "袩褉褘薪褌褝褉"
+msgid "paranoid"
+msgstr "袩邪褉邪薪邪i写邪谢褜薪褘"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "孝邪泻, 薪邪写褉褍泻邪胁邪褑褜 邪斜械写蟹胁械 褋褌邪褉芯薪泻i 褌褝泻褋褌褍"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "袩褉邪胁械褉泻邪 锌邪褉褌芯褳"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "袞邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 写褉褍泻?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s out of range!"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"袛谢褟 写褉褍泻褍 薪邪 锌褉褘薪褌褝褉褘 SMB 薪械邪斜褏芯写薪邪 锌邪蟹薪邪褔褘褑褜 i屑褟 褏芯褋褌褍 SMB (薪械 蟹邪褳褋褢写褘 "
+"褋褍锌邪写邪械 蟹 i屑械薪械屑 褍 褋械褌褑褘 TCP/IP) i 邪写褉邪褋 IP 褋械褉胁械褉邪 写褉褍泻褍, 邪 褌邪泻褋邪屑邪 i屑褟 "
+"褉褝褋褍褉褋褍, 褟泻i 褋锌邪谢褍褔邪薪褘 蟹 胁褘斜褉邪薪褘屑 锌褉褘薪褌褝褉邪屑, i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍, 锌邪褉芯谢褜 i "
+"i薪褎邪褉屑邪褑褘褞 邪斜 锌褉邪褑芯褳薪邪泄 谐褉褍锌械."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Option %s must be a number!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "reconfigure"
+msgstr "袧邪褋褌褉芯泄泻邪 X Window"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"袙邪褕邪 胁i写褝邪泻邪褉褌邪 屑芯卸邪 屑械褑褜 3D-锌邪褋泻邪褉褝薪薪械, 褟泻芯械 锌邪写褌褉褘屑谢i胁邪械褑褑邪 褌芯谢褜泻i XFree %"
+"s.\n"
+"袦袗袡笑袝 袧袗 袔袙袗袟袝, 楔孝袨 袚协孝袗 协袣小袩袝袪蝎袦袝袧孝袗袥鞋袧袗携 袩袗袛孝袪蝎袦袣袗 I 袦袨袞袗 袩袪蝎袙袝小笑I 袛袗\n"
+"袟袗袙I小袗袧袧携 袙袗楔袗袚袗 袣袗袦袩'挟孝协袪校."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+msgid "Xinetd Service"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10193,554 +9982,551 @@ msgstr ""
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"袩邪屑褘谢泻邪 褳褋褌邪谢褟胁邪薪薪褟 邪boot, \n"
+"褋锌褉邪斜邪胁邪褑褜 褍褋褌邪谢褢褳胁邪褑褜, 薪械谐谢械写蟹褟褔褘 薪邪 屑邪谐褔褘屑邪褋褑褜 锌邪褉褍褕褝薪薪褟 锌械褉褕邪谐邪 褉邪蟹写械谢褍?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "携泻i 褌褘锌 写褉褍泻邪褉泻i 胁褘 屑邪械褑械?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "袣邪谢i 谢邪褋泻邪, 蟹邪锌芯褳薪i褑械 褑i 锌邪蟹薪邪褔褑械 锌芯谢械 薪i卸褝泄"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-写褘褋泻i %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "On boot"
+msgstr "Yaboot"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+msgid "Bus identification"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Location"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+msgid "Please make a backup of your data first"
+msgstr "袩邪-锌械褉褕邪械, 蟹褉邪斜i褑械 褉褝蟹械褉胁芯胁褍褞 泻芯锌i褞 胁邪褕褘褏 写邪写蟹械薪褘褏"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Description"
-msgstr "袗锌i褋邪薪薪械"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name of printer"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "袧邪 褟泻i 蟹 屑邪褞褔褘褏褋褟 卸芯褉褋褌泻i褏 写褘褋泻邪褳 袙褘 卸邪写邪械褑械 褳褋褌邪谢褟胁邪褑褜 Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "协泻褋锌械褉褌"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Morocco"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
+msgid "Which printer model do you have?"
+msgstr "携泻i 褌褘锌 写褉褍泻邪褉泻i 胁褘 屑邪械褑械?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "Add a new printer"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A command line must be entered!"
+msgid " All of your selected data have been "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Command line"
-msgstr "I屑褟 写邪屑械薪褍"
+msgid "<-- Delete"
+msgstr "袟薪i褕褔褘褑褜"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "Nepal"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Pipe into command"
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "锌邪屑械褉 斜谢芯泻褍"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI 锌褉褘薪褌褝褉褍"
+msgid "Problems installing package %s"
+msgstr "袩褉邪斜谢械屑褘 蟹 褍褋褌邪谢褟胁邪薪薪械屑 锌邪泻械褌褍 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Port"
-msgstr "袩芯褉褌"
+msgid "Add a scanner manually"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "I屑褟 锌褉褘薪褌褝褉褍"
+msgid "Reload partition table"
+msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The port number should be an integer!"
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Search for fonts in installed list"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "I屑褟 锌褉褘薪褌褝褉褍"
+msgid "Boot"
+msgstr "Root"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"袣邪斜 写褉褍泻邪胁邪褑褜 锌褉邪蟹 褋芯泻械褌 写褉褍泻邪褉泻i, 胁邪屑 薪械邪斜褏芯写薪邪 蟹邪斜褟褋锌械褔褘褑褜\n"
-"i屑褟 锌褉褘薪褌褝褉褍 i 屑邪谐褔褘屑邪 褟谐芯 薪褍屑邪褉 锌芯褉褌褍."
+msgid "Tuner type:"
+msgstr "袟屑褟薪i褑褜 褌褘锌 褉邪蟹写蟹械谢褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "袨锌褑褘i 褋芯泻械褌褍 锌褉褘薪褌褝褉褍"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "\"Menu\" key"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
+msgid "Security Administrator:"
+msgstr "袨锌褑褘i 邪写写邪谢械薪邪谐邪 锌褉褘薪褌褝褉褍 lpd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Please enter your login"
+msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "I屑褟 褔邪褉谐i 写褉褍泻褍"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"袛谢褟 写褉褍泻褍 薪邪 锌褉褘薪褌褝褉褘 NetWare 薪械邪斜褏芯写薪邪 锌邪蟹薪邪褔褘褑褜 i屑褟 褋械褉胁械褉褍 写褉褍泻褍 NetWare "
-"(薪械 蟹邪褳褋褢写褘 褋褍锌邪写邪械 蟹 i屑械薪械屑 褍 褋械褌褑褘 TCP/IP) i i屑褟 褔邪褉谐i 写褉褍泻褍, 褟泻邪褟 "
-"邪写锌邪胁褟写邪械 邪斜褉邪薪邪屑褍 锌褉褘薪褌褝褉褍, 邪 褌邪泻褋邪屑邪 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍 i 锌邪褉芯谢褜."
+msgid "Fonts copy"
+msgstr "肖邪褉屑邪褌邪胁邪褑褜 写褘褋泻械褌褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍 NetWare"
+msgid "Automated"
+msgstr "袗褳褌邪屑邪褌褘褔薪褘"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Save packages selection"
+msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 胁i褉褌褍邪谢褜薪邪谐邪 褉邪蟹写蟹械谢褍 %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "use pptp"
+msgstr "胁褘泻邪褉褘褋褌芯褳胁邪褑褜 pppoe"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "袩褉邪褑芯褳薪邪褟 谐褉褍锌邪"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "袗斜褟褉褘褑械, 褟泻i褟 褋械褉胁i褋褘 蟹邪锌褍褋泻邪褑褜 邪褳褌邪屑邪褌褘褔薪邪 锌褉褘 蟹邪谐褉褍蟹褑褘"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Share name"
-msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "IP 褋械褉胁械褉邪 SMB"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "I屑褟 褋械褉胁械褉褍 SMB"
+msgid "Choose a mirror from which to get the packages"
+msgstr "袙褘斜邪褉 谢褞褋褌褉邪 写谢褟 邪褌褉褘屑邪薪薪褟 锌邪泻械褌邪褳"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"袛谢褟 写褉褍泻褍 薪邪 锌褉褘薪褌褝褉褘 SMB 薪械邪斜褏芯写薪邪 锌邪蟹薪邪褔褘褑褜 i屑褟 褏芯褋褌褍 SMB (薪械 蟹邪褳褋褢写褘 "
-"褋褍锌邪写邪械 蟹 i屑械薪械屑 褍 褋械褌褑褘 TCP/IP) i 邪写褉邪褋 IP 褋械褉胁械褉邪 写褉褍泻褍, 邪 褌邪泻褋邪屑邪 i屑褟 "
-"褉褝褋褍褉褋褍, 褟泻i 褋锌邪谢褍褔邪薪褘 蟹 胁褘斜褉邪薪褘屑 锌褉褘薪褌褝褉邪屑, i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍, 锌邪褉芯谢褜 i "
-"i薪褎邪褉屑邪褑褘褞 邪斜 锌褉邪褑芯褳薪邪泄 谐褉褍锌械."
+"校 锌褉邪谐褉邪屑褘 蟹屑械薪褘 锌邪屑械褉邪褳 褉邪蟹写蟹械谢邪 FAT 薪械 邪褌褉褘屑邪谢邪褋褟\n"
+"邪锌褉邪褑邪胁邪褑褜 袙邪褕 褉邪蟹写蟹械谢, 锌邪屑褘谢泻邪: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍 SMB (Windows 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "袧邪 褟泻i 褋械泻褌邪褉 锌械褉邪薪械褋褑褨?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+msgid "Do you want to click on this button?"
+msgstr "袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 aboot?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Bahamas"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "袗写写邪谢械薪褘 胁褍蟹械谢"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "袗写写邪谢械薪褘 胁褍蟹械谢"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Manual configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "袗写写邪谢械薪褘 胁褍蟹械谢"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"袛谢褟 薪邪褋褌褉芯泄泻i 邪写写邪谢械薪邪泄 褔邪褉谐i 写褉褍泻褍 胁邪屑 锌邪褌褉褝斜薪邪\n"
-"锌邪蟹薪邪褔褘褑褜 i屑褟 邪写写邪谢械薪邪谐邪 褋械褉胁械褉邪 i i屑褟 褔邪褉谐i 写褉褍泻褍,\n"
-"褍 褟泻褍褞 邪写写邪谢械薪褘 褋械褉胁械褉 斜褍写蟹械 邪写锌褉邪褳谢褟褑褜 蟹邪写邪薪薪i."
+"袚褝褌褘 锌邪泻械褌 蟹邪谐褉褍卸邪械 邪斜褉邪薪褍褞 褉邪褋泻谢邪写泻褍 泻谢邪胁i褟褌褍褉褘 褟泻 薪邪斜芯褉 蟹\n"
+"/etc/sysconfig/keyboard. 衼薪邪 屑芯卸邪 斜褘褑褜 邪斜褉邪薪邪 褌邪泻褋邪屑邪 蟹 写邪锌邪屑芯谐邪泄 "
+"kbdconfig.\n"
+"袙褘 屑芯卸邪褑械 蟹褉邪斜i褑褜 写邪褋褌褍锌薪邪泄 褟械 写谢褟 褕屑邪褌谢褨泻褨褏 屑邪褕褘薪邪褳."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "袨锌褑褘i 邪写写邪谢械薪邪谐邪 锌褉褘薪褌褝褉褍 lpd"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "URI 锌褉褘薪褌褝褉褍"
+msgid "Xpmac (installation display driver)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Syslog - 谐褝褌邪 褋褉芯写邪泻, 蟹 写邪锌邪屑芯谐邪泄 褟泻芯谐邪 屑薪芯谐i褟 写褝屑邪薪褘 蟹邪锌i褋胁邪褞褑褜 "
+"锌邪胁械写邪屑谢械薪薪i\n"
+"褳 褉芯蟹薪褘褟 褎邪泄谢褘 褋褌邪褌褘褋褌褘泻i. 袚褝褌邪 胁械谢褜屑i 写芯斜褉邪 写谢褟 邪谐谢褟写褍 锌褉邪褑褘 褉芯蟹薪褘褏 褋谢褍卸斜邪褳."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
+msgid "Unknown/Others"
+msgstr "袗谐褍谢褜薪褘"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "袨锌褑褘i"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 胁褘写邪谢械薪褘"
+msgid "Auto-detected"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"袙邪褕 泻邪屑锌'褞褌邪褉 屑芯卸邪 斜褘褑褜 褋泻邪薪褎褨谐褍褉邪胁邪薪褘 薪邪 褋褍屑械褋薪邪械 胁褘泻邪褉褘褋褌邪薪薪械\n"
+" 袉薪褌褝褉薪褝褌褍 (Internet Connection Sharing)?\n"
+"\n"
+"袟邪褳胁邪谐邪: 胁邪屑 锌邪褌褉褝斜薪褘 褋械褌泻邪胁褘 邪写邪锌褌邪褉 写谢褟 锌邪写泻谢褞褔褝薪薪褟 写邪 袥袙小.\n"
+"\n"
+"袙褘 卸邪写邪械褑械 褍褋褌邪谢褟胁邪褑褜 褋褍屑械褋薪褘 写芯褋褌褍锌 写邪 Internet?"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10750,786 +10536,705 @@ msgid ""
"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "袗写泻邪蟹邪褑褜"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Available printers"
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+msgid "Remote Printers"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "小褌胁邪褉褝薪薪械 i 褎邪褉屑邪褌邪胁邪薪薪械 褎邪泄谢邪 %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "URI 锌褉褘薪褌褝褉褍"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "袙褘斜褟褉褘褑械 i褋薪褍褞褔褘 LVM 写谢褟 写邪斜邪褳谢械薪薪褟"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+msgid "xfs restart"
+msgstr "邪斜屑械卸邪胁邪薪薪械"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "I屑褟 锌褉褘薪褌褝褉褍"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "薪褟屑邪 写邪褋褌褍锌薪褘褏 褉邪蟹写蟹械谢邪褳"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "小械褌泻邪胁褘 锌褉褘薪褌褝褉 (TCP/Socket)"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "I屑褟 写邪屑械薪褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "袪袔袪掳小袀袪覒小袑小鈥⌒犘呅犅 袪路袪掳袪褩小袀袪掳小鈧犅靶犅敌犙 小褤 %s"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "袩褉褘薪褌褝褉"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"校 薪械泻邪褌芯褉褘褏 胁褘锌邪写泻邪褏 %s 写褉邪泄胁械褉褍 锌邪褌褉褝斜薪邪 薪械泻邪褌芯褉邪褟 写邪写邪褌泻芯胁邪褟 i薪褎邪褉屑邪褑褘褟,\n"
+"邪谢械 蟹胁褘褔邪泄薪邪 谐褝褌邪 薪械 锌邪褌褉邪斜褍械褑褑邪. 笑i 薪械 卸邪写邪械褑械 胁褘 蟹邪写邪褑褜 写谢褟 褟谐芯\n"
+"写邪写邪褌泻芯胁褘褟 芯锌褑褘i, 褑i 写邪蟹胁芯谢i褑械 写褉邪泄胁械褉褍 锌褉邪褌褝褋褑i褉邪胁邪褑褜 屑邪褕褘薪褍\n"
+"褳 锌芯褕褍泻邪褏 薪械邪斜褏芯写薪邪泄 i薪褎邪褉屑邪褑褘i? 袦邪谐褔褘屑邪, 褌褝褋褑i褉邪胁邪薪薪械 锌褉褘胁褟写蟹械\n"
+"写邪 褋锌褘薪械薪薪褟 泻邪屑锌'褞褌褝褉褍, 邪谢械 褟薪芯 薪i褔芯谐邪 薪械 褋邪锌褋褍械."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
+msgid "Cuba"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "袟屑褟薪械薪薪械 锌邪屑械褉邪褳"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "袙褘 卸邪写邪械褑械, 泻邪斜 谐褝褌邪械 蟹谢褍褔褝薪薪械 褋褌邪褉褌邪胁邪谢邪 锌褉褘 蟹邪谐褉褍蟹褑褘?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "袞邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 写褉褍泻?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"袩邪写褌褉褘屑泻邪 3D-锌邪褋泻邪褉褝薪薪褟 褳 袙邪褕邪泄 胁褨写褝邪泻邪褉褑械 胁褘泻邪薪邪薪邪 褌芯谢褜泻褨 褳 XFree %s.\n"
+"XFree %s 屑芯卸邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 褌芯谢褜泻褨 2D-锌邪褋泻邪褉褝薪薪械 写谢褟 谐褝褌邪泄 胁褨写褝邪泻邪褉褌褘."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "袦邪泄褋褌邪褉 锌邪写褉褘褏褌芯褳泻i 褉邪蟹写蟹械谢邪褳 DrakX 蟹薪邪泄褕芯褳 薪邪褋褌褍锌薪褘褟 胁邪褉褘褟薪褌褘:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "袦邪写褜褟褉褋泻i"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"袗斜褟褉褘褑械 胁邪褕邪谐邪 锌褉邪胁邪泄写邪褉邪.\n"
+"泻邪谢i 褟谐芯 薪褟屑邪 褳 谐褝褌褘屑 褋锌i褋械, 邪斜褟褉褘褑械 褌褘锌 ``I薪褕褘''"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 袦斜"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+msgid "LDAP Server"
+msgstr "褋械褉胁械褉"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"袩邪写褌褉褘屑泻邪 PCMCIA - 谐褝褌邪 蟹胁褘褔邪泄薪邪 锌邪写褌褉褘屑泻邪 褌邪泻i褏 褉褝褔邪褳, 褟泻 Ethernet i\n"
+"屑邪写褝屑褘 褳 薪邪褳褌斜褍泻邪褏. 袙邪屑 薪褟屑邪 薪械邪斜褏芯写薪邪褋褑i 泻邪薪褎i谐褍褉邪胁邪褑褜 i褏, 泻邪谢i 薪邪 胁邪褕邪泄\n"
+"屑邪褕褘薪械 i褏 薪褟屑邪, 褑i 褟薪邪 薪械 薪邪褳褌斜褍泻."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+msgid "Choose your country"
+msgstr "袙褘斜邪褉 泻谢邪胁i褟褌褍褉褘"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
+msgid "Standalone Tools"
+msgstr "袣邪薪褋芯谢褜薪褘褟 褨薪褋褌褉褍屑械薪褌邪谢褜薪褘褟 褋褉芯写泻褨"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "邪斜屑械卸邪胁邪薪薪械"
+msgid "Where"
+msgstr "袟 泻芯谢邪屑"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "but not matching"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "I屑褟 锌褉褘薪褌褝褉褍"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "袧邪褋褌褉芯泄泻邪 泻邪褉褌 PCMCIA ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "kdesu missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 CUPS"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "袩褉邪褑褝褋 褍褋褌邪谢褟胁邪薪薪褟 蟹邪谐褉褍蟹褔褘泻邪 薪械 邪褌褉褘屑邪褳褋褟. 校蟹薪i泻谢邪 薪邪褋褌褍锌薪邪褟 锌邪屑褘谢泻邪:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "袪邪蟹写蟹械谢 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "袩邪褉邪薪邪i写邪谢褜薪褘"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 NIS"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+msgid "No printer found!"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "小褑褢褉褑i 写邪写蟹械薪褘褟 薪邪 褳褋i屑 写褘褋泻褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (袩邪 写邪屑邪褳谢械薪薪褞)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "袟褉芯斜谢械薪邪"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP 褋械褉胁械褉邪 SMB"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "permissions"
+msgstr "袪邪蟹写蟹械谢 %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
+#, c-format
+msgid "<- Previous"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "袩褉褘薪褌褝褉"
+msgid "Internet Connection Sharing configuration"
+msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "袩械褉邪泻谢褞褔褝薪薪械 锌邪屑i卸 褍锌邪褉邪写泻邪胁邪薪薪械屑 锌邪 谐褉褍锌械 i 邪褋芯斜泻邪褏"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Themes"
+msgstr "袛褉褝胁邪"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "袨锌褑褘i: %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"袗写写邪谢械薪褘 CUPS 褋械褉胁械褉 薪械 锌邪褌褉邪斜褍械 邪写 袙邪褋 薪邪褋褌褉芯泄泻褨 锌褉褘薪褌褝褉褍\n"
-"薪邪 谐褝褌邪泄 屑邪褕褘薪械, 褢薪 斜褍写蟹械 蟹薪芯泄写蟹械薪褘 邪褳褌邪屑邪褌褘褔薪邪.\n"
-"袣邪谢褨 袙褘 薪械 褳锌褝褳薪械薪褘, 邪斜褟褉褘褑械 \"袗写写邪谢械薪褘 褋械褉胁械褉 CUPS\"."
+"袧械泻邪褌芯褉褘褟 泻褉芯泻i 薪械 蟹邪胁械褉褕邪薪褘.\n"
+"袙褘 褋邪锌褉邪褳写褘 卸邪写邪械褑械 胁褘泄褋褑i 蟹邪褉邪蟹?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "携泻 锌褉褘薪褌邪褉 写邪谢褍褔邪薪褘?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "袙褘斜邪褉 褌褘锌褍 蟹谢褍褔褝薪薪褟 锌褉褘薪褌褝褉褍"
+msgid "Polish (qwertz layout)"
+msgstr "袩芯谢褜褋泻i (qwertz 褉邪褋泻谢邪写泻邪)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
msgstr ""
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Portuguese"
+msgstr "袩邪褉褌褍谐邪谢褜褋泻i"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "I屑褟 胁i褉褌褍邪谢褜薪邪谐邪 褉邪蟹写蟹械谢褍"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP 邪写褉邪褋 锌邪胁i薪械薪 斜褘褑褜 褍 褎邪褉屑邪褑械 1.2.3.4"
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "袚褝褌褘 泻邪褌邪谢芯谐 锌邪胁褨薪械薪 蟹薪邪褏芯写蟹褨褑褑邪 褳薪褍褌褉褘 泻邪褉邪薪褢胁邪泄 褎邪泄谢邪胁邪泄 褋褨褋褌褝屑褘"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "校褋褌邪谢褟胁邪薪薪械 蟹邪谐褉褍蟹褔褘泻褍"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "袩邪蟹薪邪褔褑械 锌邪屑械褉 胁i写褝邪锌邪屑褟褑i"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "LVM name?"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "袟薪芯泄写蟹械薪褘 %s %s i薪褌褝褉褎械泄褋褘"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "校褋褌邪谢褢褳泻邪"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ 泻邪褉褌褘"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "logdrake"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "袗斜褟褉褘褑械 写褘褋泻邪胁芯写, 褍 褟泻i屑 斜褍写蟹械 褋褌胁邪褉邪褑褑邪 蟹邪谐褉褍蟹邪褔薪邪褟 写褘褋泻械褌邪"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "LILO with text menu"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Everything (no firewall)"
+msgstr "袔褋褢 褋泻邪薪褎i谐褍褉邪胁邪薪邪!"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "袟褉芯斜谢械薪邪"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "小褍胁褟蟹褜 蟹 谢褞褉邪屑 写谢褟 邪褌褉褘屑邪薪薪褟 褋锌i褋褍 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (old)"
+msgstr "袥i褌芯褳褋泻i AZERTY (褋褌邪褉褘)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Brazilian (ABNT-2)"
+msgstr "袘褉邪蟹i谢褜褋泻i (ABNT-2)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "校褋褌邪谢褟胁邪薪薪械 SILO"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "/File/_Open"
msgstr ""
#: ../../security/help.pm:1
@@ -11537,157 +11242,147 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "袦邪写褜褟褉褋泻i"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "袩褉邪胁械褉泻邪 锌邪褉褌芯褳"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "袣邪褉褌邪 ISDN PCI 薪械 蟹薪芯泄写蟹械薪邪. 袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 薪邪 薪邪褋褌褍锌薪褘屑 褝泻褉邪薪械."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "GB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "袣邪谢i 谢邪褋泻邪, 褍胁褟写蟹i褑械 i屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Enable CD Boot?"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11695,740 +11390,536 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
+"袧械 褏邪锌邪械 屑械褋褑邪 褳 斜褍褎械褉褘 锌邪写泻邪褔泻i (swap) 写谢褟 褳褋褌邪谢褟胁邪薪薪褟, 锌邪胁褟谢i褔褑械 褟谐芯."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "袗斜褟褉褘褑械 写邪写邪褌泻芯胁褘褟 薪邪褋褌褉芯泄泻i 写谢褟 褋械褉胁械褉邪"
-
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Security level"
-msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+msgid "%s on %s"
+msgstr "袩芯褉褌"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "校蟹褉芯胁械薪褜 斜褟褋锌械泻i"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "袨锌褑褘i"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "携泻i 胁邪褕 褔邪褋邪胁褘 锌芯褟褋?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"袩褉褘屑邪褞褑褑邪 褳谢邪褋褑i胁邪褋褑i 4 褍蟹褉芯褳薪褟, 邪谢械 蟹邪褉邪蟹 褋i褋褌褝屑邪 锌芯褳薪邪褋褑褞 蟹邪褔褘薪械薪邪.\n"
-"袩邪褉邪屑械褌褉褘 斜褟褋锌械泻i 褳褋褌邪薪芯褳谢械薪褘 薪邪 屑邪泻褋i屑褍屑."
+msgid "Guinea"
+msgstr "袗谐褍谢褜薪褘"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"袧邪 谐褝褌邪屑 褍蟹褉芯褳薪械 斜褟褋锌械泻i 屑邪谐褔褘屑邪 胁褘泻邪褉褘褋褌邪薪薪械 褋i褋褌褝屑褘 褳 褟泻邪褋褑i\n"
-"褋械褉胁械褉褍. 校蟹褉芯胁械薪褜 斜褟褋锌械泻i 写邪褋褌邪褌泻芯胁邪 胁褘褋芯泻i 写谢褟 褉邪斜芯褌褘\n"
-"褋械褉胁械褉褍, 褟泻i 写邪锌褍褋泻邪械 蟹谢褍褔褝薪薪i 褋邪 褕屑邪褌谢i泻i屑i 泻谢i械薪褌邪屑i."
+msgid "The system is now connected to the Internet."
+msgstr "携泻 胁褘 锌谢邪薪褍械褑械 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
msgstr ""
-"袚褝褌邪 褋褌邪薪写邪褉褌薪褘 褍蟹褉芯胁械薪褜 斜褟褋锌械泻i, 褟泻i 褉褝泻邪屑械薪写邪胁邪薪褘 写谢褟 泻邪屑锌'褞褌褝褉褍,\n"
-"褟泻i 写邪谢褍褔邪薪褘 写邪 Internet 褍 褟泻邪褋褑i 泻谢i械薪褌褍. 袛邪写邪薪褘褟 薪芯胁褘褟 锌褉邪胁械褉泻i\n"
-"斜褟褋锌械泻i."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"袩邪褉芯谢褜 蟹邪褉邪蟹 褍泻谢褞褔邪薪褘, 邪谢械 胁褘泻邪褉褘褋褌邪薪薪械 泻邪屑锌'褞褌褝褉褍 褳 褟泻邪褋褑i 褋械褌泻邪胁邪谐邪\n"
-"褌邪泻褋邪屑邪 薪械 褉褝泻邪屑械薪写邪胁邪薪邪."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
msgstr ""
-"袚褝褌褘 褍蟹褉芯胁械薪褜 薪械邪斜褏芯写薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 蟹 邪褋褑褟褉芯谐邪泄. 小i褋褌褝屑邪 斜褍写蟹械 锌褉邪褋褑械泄\n"
-"褍 泻邪褉褘褋褌邪薪薪i, 邪谢械 i 斜芯谢褜褕 褔褍褌薪邪泄: 谐褝褌褘 褍蟹褉芯胁械薪褜 斜褟褋锌械泻i 薪械谢褜谐邪 "
-"胁褘泻邪褉褘褋褌芯褳胁邪褑褜\n"
-"薪邪 屑邪褕褘薪邪褏, 褟泻i褟 写邪谢褍褔邪薪褘 写邪 褋械褌泻i 褑i 写邪 Internet. 校胁邪褏芯写 薪械 邪斜邪褉芯薪械薪褘 "
-"锌邪褉芯谢械屑."
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "袩邪褉邪薪邪i写邪谢褜薪褘"
+msgid "Icon"
+msgstr "袩i泻褌邪谐褉邪屑邪"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "袙褘褋芯泻i"
+msgid "Please choose what you want to backup"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "袙褘褋芯泻i"
+msgid "256 colors (8 bits)"
+msgstr "256 泻芯谢械褉邪褳 (8 斜i褌邪褳)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "袟褍褋褨屑 褋谢邪斜褘"
+msgid "Read-write"
+msgstr "效褘褌邪薪薪械-蟹邪锌i褋"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "小邪褉写褝褔薪邪 蟹邪锌褉邪褕邪械屑 褍 Crackers"
+msgid "Size: %s\n"
+msgstr "袩邪屑械褉: %s\n"
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "袣邪谢i 谢邪褋泻邪, 锌械褉邪泄写蟹i褑械 褳 %s 写谢褟 邪泻褌褘胁邪褑褘i 蟹屑褟薪械薪薪褟褳"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname: "
+msgstr "I屑褟 屑邪褕褘薪褘"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "袣邪谢i 谢邪褋泻邪, 胁褘泄写蟹i褑械, 邪 锌芯褌褘屑 褋泻邪褉褘褋褌邪泄褑械 Ctrl-Alt-BackSpace"
+msgid "Chunk size %s\n"
+msgstr "袩邪屑械褉 褎褉邪谐屑械薪褌褍 %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "袛褘褋泻邪胁芯写 薪械写邪褋褌褍锌薪褘"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
+msgid "Error!"
+msgstr "袩邪屑褘谢泻邪"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Write Config"
-msgstr "袧邪褋褌褉芯泄泻邪 X Window"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "cable connection detected"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP Range End:"
+msgid "/_Report Bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS 褋械褉胁械褉:"
+msgid "Resize"
+msgstr "袟屑褟薪械薪薪械 锌邪屑械褉邪褳"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "I屑褟 写邪屑械薪褍"
+msgid "Dominica"
+msgstr "NIS Domain"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Routers:"
+msgid "matching"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "袦邪褋泻邪 褋械褌泻i"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "袧邪褋褌褉芯泄泻邪 IDE"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 胁褘写邪谢械薪褘"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "袟薪i褕褔褘褑褜"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 i褋薪褍褞褔褘 褉邪蟹写蟹械谢"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Canadian (Quebec)"
+msgstr "袣邪薪邪写褋泻i (袣胁械斜褝泻)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Allow Thin Clients"
+msgid "Mouse device: %s\n"
+msgstr "袦褘褕: %s\n"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Thin Client"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "type: %s"
-msgstr "孝褘锌: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid "We are now going to configure the %s connection."
msgstr ""
+"\n"
+"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "MandrakeExpert Corporate"
+msgstr "褝泻褋锌械褉褌"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "袗斜褟褉褘褑械 褎邪泄谢"
+msgid "Write protection"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "袟薪i褕褔褘褑褜"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "You've not selected any font"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+msgid "Language"
+msgstr "袙褘斜邪褉 屑芯胁褘"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Printer model selection"
+msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "校褋械 写邪写蟹械薪褘褟 褳 褉邪蟹写蟹械谢械 %s 斜褍写褍褑褜 褋褌褉邪褔邪薪褘 锌邪褋谢褟 蟹屑械薪褘 褟谐芯 褌褘锌褍"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d 褋械泻褍薪写邪褳"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Floppy"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "Custom disk partitioning"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 i褋薪褍褞褔褘 褉邪蟹写蟹械谢"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Net Boot Images"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "小褌胁邪褉褘褑褜 蟹邪谐褉. 写褘褋泻"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS 褋械褉胁械褉:"
+msgid "type: %s"
+msgstr "孝褘锌: "
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS 褋械褉胁械褉:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "小谢邪胁邪褑泻i (QWERTY)"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+msgid "No Sound Card detected!"
+msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "袩芯褉褌 屑褘褕褘"
#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 胁i褉褌褍邪谢褜薪邪谐邪 褉邪蟹写蟹械谢褍 %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "校褋褌邪谢褢褳泻邪"
-
-#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "袩褉褘屑褨褑械 胁i薪褕邪胁邪薪薪i!"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Ftp Server"
+msgstr "NIS 褋械褉胁械褉:"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "manual"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
+msgid "the type of bus on which the mouse is connected"
+msgstr "袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 锌芯褋谢褟写芯褳薪褘 锌芯褉褌, 写邪 褟泻芯谐邪 锌邪写泻谢褞褔邪薪邪 胁邪褕邪褟 屑褘褕."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "袩械褉邪蟹邪谐褉褍蟹i褑褜"
+msgid "Uganda"
+msgstr "袗写泻邪褌"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "袩邪屑褘谢泻邪"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
+msgid "Comoros"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
+"\n"
+"袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Yaboot mode"
+msgstr "袟邪谐褉褍蟹邪褔薪邪褟 锌褉褘谢邪写邪"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr ""
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "袟胁褘褔邪泄薪邪褟 屑褘褕 蟹 3 泻薪芯锌泻邪屑褨"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12440,4574 +11931,5121 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
+msgid "KB"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+msgid "Network & Internet"
+msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "袧邪褋褌褉. 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "袥i褌芯褳褋泻i \"褎邪薪械褌褘褔薪褘\" QWERTY"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
+msgid "Sharing of local scanners"
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+msgid "Remote host name missing!"
+msgstr "袗写写邪谢械薪褘 胁褍蟹械谢"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "袟邪褏邪胁邪薪薪械 褳 褎邪泄谢"
+msgid "Network"
+msgstr "小械褌泻邪:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "袚褝褌褘 锌邪褉芯谢褜 蟹邪薪邪写褌邪 锌褉芯褋褌褘"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "小谢邪胁邪褑泻i (QWERTZ)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 写邪写邪薪褘 写邪 褋i褋褌褝屑褘"
+msgid "Use daemon"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
+msgid "Authentication"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Next"
-msgstr "孝褝泻褋褌"
+msgid "Additional CUPS servers: "
+msgstr "IP 褋械褉胁械褉邪 SMB"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Previous"
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
+msgid "Where do you want to mount %s?"
+msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 屑邪薪褑i褉邪胁邪褑褜 锌褉褘谢邪写褍 %s?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "Restore Via Network"
+msgstr "袩械褉邪泻邪薪褎i谐褍褉邪胁邪褑褜 谢邪泻邪谢褜薪褍褞 褋械褌泻褍"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+msgid "Algeria"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
+msgid "Initrd-size"
+msgstr "Initrd"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "CD in place - continue."
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "袩邪 胁褘斜邪褉褍"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 袦斜"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Restore all backups"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+msgid "Setting Default Printer..."
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Files Restored..."
+msgid "Interface %s (using module %s)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr ""
+msgid "Name: %s\n"
+msgstr "I屑褟: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "I屑褟 屑邪褕褘薪褘"
+msgid "Generating preview ..."
+msgstr "袙褘蟹薪邪褔褝薪薪械 锌褉褘谢邪写邪褳..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Password required"
-msgstr "袩邪褉芯谢褜"
+#: ../../mouse.pm:1
+#, c-format
+msgid "serial"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Host Name"
-msgstr "I屑褟 屑邪褕褘薪褘"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "袚褉褍蟹i薪褋泻i (\"袥邪褑i薪褋泻邪褟\" 褉邪褋泻谢邪写泻邪)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "袩械褉邪泻邪薪褎i谐褍褉邪胁邪褑褜 谢邪泻邪谢褜薪褍褞 褋械褌泻褍"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
+msgid "Kenya"
+msgstr "袣谢邪胁i褟褌褍褉邪"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Use ``Unmount'' first"
+msgstr "小锌邪褔邪褌泻褍 蟹褉邪斜i褑械 ``Unmount''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing mtools packages..."
+msgstr "校褋褌邪谢褟胁邪薪薪械 锌邪泻械褌褍 %s"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "You must specify a root partition"
+msgstr "袙褘 锌邪胁i薪薪褘 屑械褑褜 褉邪蟹写蟹械谢 swap"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+msgid "Select a scanner model"
+msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+msgid "Drakbackup Configuration"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Save as.."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove user directories before restore."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
+msgid "Autologin"
+msgstr "袗褳褌邪屑邪褌褘褔薪褘 褳胁邪褏芯写 褍 褋i褋褌褝屑褍"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+msgid "System configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+msgid "Domain Admin Password"
+msgstr "袩邪写褑胁械褉写蟹i褑褜 锌邪褉芯谢褜"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid ""
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Restore system"
-msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
+msgid "Configuring printer ..."
+msgstr "袧邪褋褌褉芯泄泻邪 锌褉褘薪褌褝褉褍"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "袉薪褕褘褟"
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+#: ../../common.pm:1
+#, c-format
+msgid "MB"
+msgstr "袦斜"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "Bermuda"
+msgstr "袧褟屑械褑泻i"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"袛邪谢械泄 邪写蟹薪邪褔邪薪褘 褍褋械 褨褋薪褍褞褔褘褟 褉邪蟹写蟹械谢褘 Linux, 蟹薪芯泄写蟹械薪褘褟 薪邪 胁邪褕褘屑 写褘褋泻褍,\n"
+" 褟泻褨褟 蟹褉芯斜谢械薪褘 屑邪泄褋褌褉邪屑 胁褘谢褍褔褝薪薪褟 写褘褋泻邪褳. 袙褘 屑芯卸邪褑械 锌邪泻褨薪褍褑褜 褨褏 褌邪泻 褨 "
+"胁褘泻邪褉褘褋褌褳胁邪褑褜\n"
+" 写邪谢械泄, 斜芯 褟薪褘 写芯斜褉邪 锌邪写褘褏芯写蟹褟褑褜 写谢褟 蟹胁褘褔邪泄薪邪谐邪 胁褘泻邪褉褘褋褌邪薪薪褟. 袣邪谢褨 胁褘\n"
+" 褳薪芯褋褨褑械 蟹屑械薪褘, 胁褘 锌邪胁褨薪薪褘, 胁褘谢褍褔褘褑褜 褏邪褑褟 褉邪蟹写蟹械谢 (\"/\"). 袪邪斜褨褑械\n"
+" 褉邪蟹写蟹械谢 薪械 胁械谢褜屑褨 屑邪谢褘屑, 斜芯 褳 邪写胁邪褉芯褌薪褘屑 胁褘锌邪写泻褍 胁褘 薪褟 蟹写芯谢械械褑械 褍褋褌邪谢褟胁邪褑褜\n"
+" 写邪褋褌邪褌泻芯胁邪 锌褉邪谐褉邪屑薪邪谐邪 蟹邪斜械褋锌褟褔褝薪薪褟.袣邪谢褨 胁褘 卸邪写邪械褑械 蟹邪褏邪胁邪褑褜 胁邪褕褘褟 "
+"写邪写蟹械薪褘褟\n"
+" 薪邪 邪褋芯斜薪褘屑 褉邪蟹写蟹械谢械, 胁褘 锌邪胁褨薪薪褘 邪斜褉邪褑褜 锌褍薪泻褌 屑邪薪褑褨褉邪胁邪薪薪褟 \"/home\".\n"
+"\n"
+"袣芯卸薪褘 褉邪蟹写蟹械谢 锌邪蟹薪邪褔邪薪褘 薪邪褋褌褍锌薪褘屑 褔褘薪邪屑 \"袉屑褟\", \"小胁芯泄褋褌胁褘\".\n"
+"\n"
+"\n"
+"\"袉屑褟\" 泻邪写邪胁邪薪邪 褌邪泻 - \"褌褘锌 写褘褋泻褍\", \"薪褍屑邪褉 写褘褋泻褍\", \"薪褍屑邪褉 褉邪蟹写蟹械谢褍\" \n"
+"(薪邪锌褉褘泻谢邪写, \"hda1\").\n"
+"\n"
+"\n"
+"\"孝褘锌 写褘褋泻褍\" 泻邪写邪胁邪薪褘 褟泻 \"hd\", 泻邪谢褨 谐褝褌邪 IDE, 褨 \"sd\" 泻邪谢褨 SCSI.\n"
+" * \"邪\" \"master\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE \n"
+" * \"b\" \"slave\" 薪邪 锌械褉褕邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
+" * \"c\" \"master\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
+" * \"d\" \"slave\" 薪邪 写褉褍谐邪褋薪褘屑 泻邪薪邪谢械 IDE\n"
+"\n"
+"\n"
+"袛谢褟 SCSI 写褘褋泻邪褳 - \"a\" 谐褝褌邪 \"锌械褉褕邪褋薪褘 卸芯褉褋泻褨 写褘褋泻\", \"b\" - \"写褉褍谐邪褋薪褘 "
+"卸芯褉褋泻褨 写褘褋泻\", 褨 谐.写."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "Remove"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Lesotho"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid "utopia 25"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid " Successfuly Restored on %s "
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " All of your selected data have been "
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup files are corrupted"
+msgid "Yes"
+msgstr "孝邪泻"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
msgstr ""
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "携泻i 锌褉邪褌邪泻芯谢 胁褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
+msgid "Restore Progress"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢褍"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Estonia"
+msgstr "协褋褌芯薪褋泻i"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"袙褘 屑邪械褑械 写蟹i褉泻褍 褳 褌邪斜谢i褑褘 褉邪写蟹械谢邪褳, 邪谢械 褟 薪械 屑邪褞 屑邪谐褔褘屑邪褋褑i 褟械 褋泻邪褉褘褋褌邪褑褜.\n"
+"袗写蟹i薪褘 胁褘褏邪写 褍 褌褘屑, 泻邪斜 锌械褉邪屑褟褋褑i褑褜 锌械褉褕邪褋薪褘褟 褉邪蟹写蟹械谢褘 褌邪泻, 泻邪斜 写蟹i褉泻邪 i褕谢邪\n"
+"邪写褉邪蟹褍 蟹邪 锌邪褕褘褉邪薪褘屑 (extended) 褉邪蟹写蟹械谢邪屑"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "袗写屑械薪邪"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Add"
+msgstr "袛邪写邪褑褜"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 屑邪谐褔褘屑邪"
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "袩邪屑褘谢泻邪 褔褘褌邪薪薪褟 褎邪泄谢褍 %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "袣谢邪胁i褟褌褍褉邪"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "\t-Tape \n"
-msgstr "孝褘锌: "
+msgid "Choose the connection you want to configure"
+msgstr "袗斜褟褉褘褑械 i薪褋褌褉褍屑械薪褌, 褟泻i 卸邪写邪械褑械 褋泻邪褉褘褋褌邪褑褜"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "Configuring network device %s"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻邪胁邪泄 锌褉褘谢邪写褘 %s"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "袗泻褌褘褳薪褘"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褋械褌泻邪胁褘 邪写邪锌褌邪褉, 褟泻i 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 "
+"写邪谢褍褔褝薪薪褟 写邪 i薪褌褝褉薪褝褌"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "袩芯褕褍泻 锌邪泻械褌邪褳 写谢褟 邪斜薪邪褳谢械薪薪褟"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "袩褍薪泻褌 屑邪薪褑i褉邪胁邪薪薪褟:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\tDo not include System Files\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "袨锌褑褘i"
+msgid "With X"
+msgstr "效邪泻邪泄褑械"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Multi-head configuration"
+msgstr "褔褘褌邪薪薪械 薪邪褋褌褉芯泄泻i"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "袙褘 屑芯卸邪褑械 邪斜褉邪褑褜 褨薪褕褘褟 屑芯胁褘, 褟泻i褟 斜褍写褍褑褜 写邪褋褌褍锌薪褘 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Save via %s on host: %s\n"
+"%s"
msgstr ""
+"笑褨 卸邪写邪械褑械 袙褘 蟹邪褏邪胁邪褑褜 蟹屑褟薪械薪薪褨?\n"
+"袘褟谐褍褔邪褟 泻邪薪褎褨谐褍褉邪褑褘褟:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "袙褘 薪械 屑芯卸邪褑械 褉邪蟹斜i胁邪褑褜 薪邪 褉邪蟹写械谢褘, 锌邪屑械褉 褟泻i褏 屑械薪械泄 蟹邪 32 袦斜"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"袩褉邪褌邪泻芯谢 rwho 写邪械 屑邪谐褔褘屑邪褋褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪屑 邪褌褉褘屑邪褑褜 褋锌i褋 褳褋i褏\n"
+"泻邪褉褘褋褌邪谢褜薪i泻邪褳, 褍胁邪泄褕芯褳褕褘褏 薪邪 屑邪褕褘薪褍, 胁褘泻邪薪邪褳 rwho 写褝屑邪薪 (锌邪写芯斜薪褘 薪邪 finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "I屑褟 写邪屑械薪褍"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "袦褘褕: %s\n"
+msgid "Sharing of local printers"
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "袩褍褋褌邪"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 屑邪薪褑i褉邪胁邪褑褜 锌褉褘谢邪写褍 %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "1 button"
+msgstr "2 泻薪芯锌泻i"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Select user manually"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "袧邪褋褌褉. 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳"
+msgid "Korea"
+msgstr "袩械褉邪薪芯褋"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Your choice? (default `%s'%s) "
+msgstr "袙邪褕 胁褘斜邪褉? (蟹屑芯褳褔邪薪薪械 %s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "on Tape Device"
-msgstr "袩芯褉褌 锌褉褘薪褌褝褉褍"
+msgid "Raw printer"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "on CDROM"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "across Network"
-msgstr "小械褌泻邪:"
+msgid "Vendor"
+msgstr "袗写泻邪褌"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Interface %s"
+msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+
+#: ../../steps.pm:1
#, c-format
-msgid "on Hard Drive"
+msgid "Configure mouse"
+msgstr "袧邪褋褌褉芯泄泻邪 屑褘褕褘"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the mount points"
+msgstr "袗斜褟褉褘褑械 锌褍薪泻褌褘 屑邪薪褑i褉邪胁邪薪薪褟"
+
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Yugoslavian (latin)"
+msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (latin)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "校褋褌邪谢褢褳胁邪械屑"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "袟 泻芯谢邪屑"
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "袟 泻芯谢邪屑"
+msgid "Is this an install or an upgrade?"
+msgstr "袗斜褟褉褘褑械 褳褋褌邪谢褟胁邪薪薪械 褑i 邪斜薪邪褳谢械薪薪械"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "效邪泻邪泄褑械"
+msgid "ISDN card"
+msgstr "校薪褍褌褉邪薪邪褟 ISDN 泻邪褉褌邪"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
+msgid "Printer on remote CUPS server"
+msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 CUPS"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "delete"
+msgstr "袟薪i褕褔褘褑褜"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+msgid "DHCP host name"
+msgstr "I屑褟 屑邪褕褘薪褘"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "monthly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "weekly"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 锌芯褋谢褟写芯褳薪褘 锌芯褉褌, 写邪 褟泻芯谐邪 锌邪写泻谢褞褔邪薪邪 胁邪褕邪褟 屑褘褕."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "daily"
+msgid "Poor"
+msgstr "袟褍褋褨屑 褋谢邪斜褘"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "hourly"
+msgid "Grenada"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "HardDrive / NFS"
+msgid "Unsafe"
+msgstr "袧械薪邪写蟹械泄薪邪"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s 褋械泻褌邪褉邪褳"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "袧械"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "Guadeloupe"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "袙褘 卸邪写邪械褑械 泻邪斜 BackSpace 锌褉邪褑邪胁邪褳 褍 泻邪薪褋芯谢褨 褟泻 Delete?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "效邪褋褑褨薪褟 胁械褉褌褘泻邪谢褜薪邪泄 褉邪蟹谐芯褉褌泻i"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "袩械褉邪褏芯写 薪邪 泻褉芯泻 `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "Removing %s ..."
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "袗斜褟褉褘褑械 褎邪泄谢"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
+msgid "Niger"
+msgstr "袙褘褋芯泻i"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
+msgid "No printer"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
+msgid "alert configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
+msgid "NetWare Printer Options"
+msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍 NetWare"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
+msgid "General"
+msgstr "袗谐褍谢褜薪褘"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褌褘锌 泻谢邪胁i褟褌褍褉褘."
+msgid "Network configuration (%d adapters)"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "袨泻"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "袧褟屑邪 锌邪褉芯谢褞"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "I屑褟 褔邪褉谐i 写褉褍泻褍"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 aboot?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "袘械谢邪褉褍褋泻褨"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+msgid "Move files to the new partition"
+msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "袛邪写邪褌泻芯胁邪褟 褌邪斜谢i褑邪 褉邪蟹写蟹械谢邪褳"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "袩褉褘薪褌褝褉"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "袩褉邪褑芯褳薪邪褟 谐褉褍锌邪"
+
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Net Method:"
+msgid "LILO with graphical menu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "袙褘写邪谢i褑褜 Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "效邪泻邪械褑褑邪"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "袙褘 薪械 屑芯卸邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍. 衼薪 褍卸芯 褳褋褌邪谢褟胁邪薪褘"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "校褋褢 褉芯褳薪邪 锌褉邪褑褟谐胁邪褑褜?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "袩褉邪谐谢褟写 写邪褋褌褍锌薪褘褏 锌邪泻械褌邪褳"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "袩邪蟹薪邪褔褑械 锌邪褉邪屑械褌褉褘"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Vanuatu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"袟 写邪锌邪屑芯谐邪泄 蟹邪谐褉褍蟹邪褔薪邪谐邪 写褘褋泻邪 胁褘 蟹屑芯卸邪褑械 蟹邪谐褉褍卸邪褑褜 Linux 薪械蟹邪谢械卸薪邪 邪写\n"
+" 褋褌邪薪写邪褉褌薪邪谐邪 蟹邪谐褉褍蟹褔褘泻邪. 袚褝褌邪 屑芯卸邪 斜褘褑褜 褟泻邪褋薪邪, 泻邪谢i 胁褘 薪械 卸邪写邪械褑械 \n"
+"褳褋褌邪谢褢褳胁邪褑褜 SILO, 泻邪谢i i薪褕邪褟 邪锌械褉邪褑褘泄薪邪褟 褋i褋褌褝屑邪 胁褘写邪谢褟械 SILO, 褑i SILO 薪械 \n"
+"屑芯卸邪 锌褉邪褑邪胁邪褑褜 褍 胁邪褕邪泄 泻邪薪褎i谐褍褉邪褑褘i. 袟邪谐褉褍蟹邪褔薪褘 写褘褋泻 褌邪泻褋邪屑邪 屑芯卸邪 斜褘褑褜 \n"
+"胁褘泻邪褉褘褋褌邪薪 褋褍屑械褋薪邪 蟹 胁褘褉邪褌邪胁邪谢褜薪邪泄 写褘褋泻械褌邪泄 Mandrake Linux, 褟泻邪褟 胁械谢褜屑i \n"
+"锌邪谢械谐褔褘褑褜 胁褘褉邪褌邪胁邪薪薪械 褋i褋褌褝屑褘 锌邪褋谢褟 蟹斜芯褞.\n"
+"\n"
+"袣邪谢i 卸邪写邪械褑械 褋褌胁邪褉褘褑褜 蟹邪谐褉褍蟹邪褔薪褘 写褘褋泻 蟹邪褉邪蟹, 褍褋褌邪褳褑械 写褘褋泻械褌褍 褳 锌械褉褕褘\n"
+"写褘褋泻邪胁芯写 i 薪邪褑i褋薪i褑械 \"Ok\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr ""
+"袙邪屑 薪械邪斜褏芯写薪邪 蟹邪写邪褑褜 锌褉邪胁i谢褜薪褘 褌褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (ext2, reiserfs)\n"
+"写谢褟 谐褝褌邪泄 泻褉芯锌泻i 屑邪薪褑i褉邪胁邪薪薪褟\n"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "袙褘斜邪褉 谐褉褍锌褘 锌邪泻械褌邪褳"
+msgid "Theme installation failed!"
+msgstr "袣谢邪褋 褍褋褌邪谢褟胁邪薪薪褟"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "袩邪屑褘谢泻邪 褔褘褌邪薪薪褟 褎邪泄谢褍 %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "胁褘泻邪褉褘褋褌芯褳胁邪褑褜 pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s 蟹 褝泻褋锌械褉褘屑械薪褌邪谢褜薪邪泄 锌邪写褌褉褘屑泻邪泄 3D-锌邪褋泻邪褉褝薪薪褟"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Advanced"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "More Options"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+msgid "Afghanistan"
+msgstr "I褉邪薪褋泻i"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron - 褋褌邪薪写邪褉褌薪邪褟 UNIX 锌褉邪谐褉邪屑邪, 褟泻邪褟 胁褘泻芯薪胁邪械 锌褉邪谐褉邪屑褘 泻邪褉褘褋褌邪谢褜薪i泻邪\n"
+"锌褉邪蟹 锌邪蟹薪邪褔邪薪褘褟 锌械褉褘褟写褘 褔邪褋褍. Vixie cron 写邪写邪械 褉邪写 写邪锌邪褳薪械薪薪褟褳 写邪 "
+"褋褌邪薪写邪褉褌薪邪谐邪\n"
+"UNIX cron, 褍泻谢褞褔邪褞褔褘 谢械锌褕褘 褳蟹褉芯胁械薪褜 斜褟褋锌械泻i i 屑芯褑薪褘褟 泻邪薪褎i谐褍褉邪褑褘泄薪褘褟 芯锌褑褘i."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "效褘褌邪泄褑械 褳胁邪卸谢i胁邪!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "袩芯褉褌"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "袩褉邪胁械褉泻邪 锌邪褉褌芯褳"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "袩邪屑褘谢泻邪 邪写泻褉褘褑褑褟 %s 写谢褟 蟹邪锌i褋褍: %s"
+msgid "The encryption keys do not match"
+msgstr "袩邪褉芯谢i 薪械 褋褍锌邪写邪褞褑褜"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "袧褟屑邪 锌邪褉芯谢褞"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Network configuration"
+msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "效邪泻邪械褑褑邪"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "INFO"
+msgid "TB"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "FATAL"
-msgstr "FAT"
+msgid "Please check if you are using a DVDR device"
+msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
#: ../../standalone/drakbackup:1
-#, c-format
-msgid "WARNING"
-msgstr ""
+#, fuzzy, c-format
+msgid "FATAL"
+msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cron not available yet as non-root"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "校褋褌邪谢褟胁邪薪薪械 %s 薪械 邪褌褉褘屑邪谢邪褋褟. 校蟹薪i泻谢邪 薪邪褋褌褍锌薪邪褟 锌邪屑褘谢泻邪:"
+msgid "Delete"
+msgstr "袟薪i褕褔褘褑褜"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "No, I don't want autologin"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"袦芯卸薪邪 薪邪褋褌褉芯i褑褜 褋i褋褌褝屑褍 写谢褟 邪褳褌邪屑邪褌褘褔薪邪谐邪 蟹邪锌褍褋泻褍 X 锌邪褋谢褟 褋褌邪褉褌褍 褋i褋褌褝屑褘.\n"
+"袞邪写邪械褑械, 泻邪斜 X 褋褌邪褉褌邪胁邪褳 锌褉褘 褉褝褋褌邪褉褑械?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
+msgid "Build the disk"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "System mode"
+msgid "Status:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS 褋械褉胁械褉:"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lilo screen"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "袝褳褉芯锌邪 (EDSS1)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Themes"
-msgstr "袛褉褝胁邪"
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Error"
+msgstr "袩邪屑褘谢泻邪"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+#: ../../any.pm:1
+#, c-format
+msgid "allow \"su\""
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
+msgid "Australia"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "袣谢邪褋 褍褋褌邪谢褟胁邪薪薪褟"
+msgid "Configure only card \"%s\"%s"
+msgstr "袣邪薪褎i谐褍褉邪胁邪褑褜 屑邪褞 泻邪褉褌褍"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "谐邪谢褜褕褌褍泻"
+msgid "Level"
+msgstr "褍蟹褉芯胁械薪褜"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Change the printing system"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "Configure services"
+msgstr "袧邪褋褌褉芯泄泻邪 褋谢褍卸斜邪褳"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "小械褉胁械褉 XFree86 %s"
-
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "mount failed: "
+msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Lilo message not found"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "Image"
+msgstr "袙芯斜褉邪蟹"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "小褌胁邪褉褝薪薪械 薪芯胁邪谐邪 褉邪蟹写蟹械谢褍"
+msgid "Remote Administration"
+msgstr "袨锌褑褘i 邪写写邪谢械薪邪谐邪 锌褉褘薪褌褝褉褍 lpd"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
+msgid "Selected All"
+msgstr "袗斜褟褉褘褑械 褎邪泄谢"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Lilo/grub mode"
-msgstr "袪褝卸褘屑 蟹谢褍褔褝薪薪褟"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "CUPS - Common Unix Printing System"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Yaboot mode"
-msgstr "袟邪谐褉褍蟹邪褔薪邪褟 锌褉褘谢邪写邪"
+msgid "Webmin Service"
+msgstr "锌褉褘谢邪写邪"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "<control>Q"
-msgstr ""
+msgid "device"
+msgstr "锌褉褘谢邪写邪"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "/File/_Quit"
-msgstr ""
+msgid "All"
+msgstr "校褋褢"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "/_File"
-msgstr "肖邪泄谢褘:\n"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "携泻褍褞 褋i褋褌褝屑褍 写褉褍泻褍 袙褘 卸邪写邪械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
+msgid "Greece"
+msgstr "袚褉褝褔邪褋泻i"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "袙褘 屑芯卸邪褑械 邪斜褉邪褑褜 褨薪褕褘褟 屑芯胁褘, 褟泻i褟 斜褍写褍褑褜 写邪褋褌褍锌薪褘 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "袗写斜褘谢邪褋褟 锌邪屑褘谢泻邪"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"袚褝褌褘 锌邪泻械褌 锌邪胁i薪械薪 斜褘褑褜 邪斜薪芯褳谢械薪褘\n"
+"袙褘 褳锌褝褳薪械薪褘, 褕褌芯 褏芯褔邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械?"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Tamil (Typewriter-layout)"
+msgstr "袗褉屑褟薪褋泻i (typewriter)"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "袣邪薪褋芯谢褜薪褘褟 褨薪褋褌褉褍屑械薪褌邪谢褜薪褘褟 褋褉芯写泻褨"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer manufacturer, model, driver"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "袩芯褉褌"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "袣邪谢i 谢邪褋泻邪, 锌邪褔邪泻邪泄褑械"
+msgid "Printer on NetWare server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "袩邪蟹薪邪褔褑械 锌邪屑械褉 RAM 褍 M斜"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "袩邪泻械褌"
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "校谢邪褋薪邪械 i屑褟"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Application:"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
+msgid "done"
+msgstr "袟褉芯斜谢械薪邪"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+msgid "Please uncheck or remove it on next time."
+msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 DiskDrake"
+msgid "Higher"
+msgstr "袙褘褋芯泻i"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Windows Migration tool"
-msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "袙褘斜邪褉 褉邪蟹写蟹械谢邪褳 写谢褟 褎邪褉屑邪褌邪胁邪薪薪褟"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Urpmi"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "袩芯褉褌 屑褘褕褘"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "邪斜邪胁褟蟹泻芯胁邪"
+msgid "Can't find %s on %s"
+msgstr "袩邪屑褘谢泻邪 邪写泻褉褘褑褑褟 %s 写谢褟 蟹邪锌i褋褍: %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Japanese 106 keys"
+msgstr "携锌芯薪褋泻i 106 泻谢邪胁i褕"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "HardDrake"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First Time Wizard"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 CUPS"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
+msgid "Insert a floppy in %s"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "DHCP Client"
+msgid "Maldives"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "compact"
+msgstr "泻邪屑锌邪泻褌薪邪"
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Gateway"
-msgstr "楔谢褞蟹"
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection type: "
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Profile: "
-msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟: "
+msgid "1 minute"
+msgstr "1 褏胁i谢i薪邪"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
+msgid "on channel %d id %d\n"
+msgstr "薪邪 褕褘薪械 %d id %d\n"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "袗泻褌褘褳薪褘"
-
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "袗泻褌褘褳薪褘"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
+msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
+"袧械 蟹薪芯泄写蟹械薪邪 褉邪蟹写蟹械谢邪褳 FAT 写谢褟 蟹屑褟薪械薪薪褟 锌邪屑械褉邪褳 邪谢褜斜芯 胁褘泻邪褉褘褋褌邪薪薪褟\n"
+"褳 褟泻邪褋褑i 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘 (褑i 薪械写邪褋褌邪褌泻芯胁邪 锌褉邪褋褌芯褉褘 薪邪 写褘褋泻褍)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Started on boot"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Boot Protocol"
+msgid "Firewall"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Adapter %s: %s"
+msgid "Area:"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN Configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 ADSL"
-
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "(E)IDE/ATA controllers"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect..."
-msgstr ""
+msgid "Printer Server"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Disconnect..."
+msgid "Disconnection from the Internet complete."
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Not connected"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Connected"
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Custom configuration"
+msgstr "袧邪褋褌褉芯泄泻邪"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface:"
+msgid "Saint Pierre and Miquelon"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Gateway:"
-msgstr "楔谢褞蟹:"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Apply"
-msgstr "袩褉懈屑械薪懈褌褜"
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Wizard..."
-msgstr "袦邪泄褋褌邪褉 褋褌胁邪褉褝薪薪褟..."
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Status:"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Type:"
-msgstr "孝褘锌: "
+msgid "Portugal"
+msgstr "袩芯褉褌"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "笑i 褢褋褑褜 褍 胁邪褋 i薪褕褘?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Hostname: "
-msgstr "I屑褟 屑邪褕褘薪褘"
+msgid ", printing to %s"
+msgstr "袩邪屑褘谢泻邪 蟹邪锌i褋褍 褳 褎邪泄谢 %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "袧邪褋褌褉芯泄泻邪 谢邪泻邪谢褜薪邪泄 褋械褌泻i"
+msgid "Assign host name from DHCP address"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "State"
-msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to normal mode"
+msgstr "袟胁褘褔邪泄薪褘 褉褝卸褘屑"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Generic"
+msgstr "袗谐褍谢褜薪褘"
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Driver"
-msgstr "褋械褉胁械褉"
+msgid "Cylinder %d to %d\n"
+msgstr "笑褘谢i薪写褉褘 蟹 %d 锌邪 %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Protocol"
+msgid "New profile..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Which disk do you want to move it to?"
+msgstr "袧邪 褟泻i 写褘褋泻 锌械褉邪薪械褋褑褨?"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Display logo on Console"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Interface"
-msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+msgid "Windows Domain"
+msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Configure Internet Access..."
-msgstr "袧邪褋褌褉芯泄泻邪 褋谢褍卸斜邪褳"
+msgid "Interface %s (on network %s)"
+msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
+msgid "INFO"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "Wallis and Futuna"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Profile to delete:"
+msgid "Is FPU present"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Del profile..."
+msgid "There are no scanners found which are available on your system.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
-
-#: ../../standalone/drakedm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choosing a display manager"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Is this correct?"
+msgstr "袚褝褌邪 写邪泻谢邪写薪邪?"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Marshall Islands"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Unable to fork: %s"
-msgstr "袟褉邪斜i褑褜 薪械邪泻褌褘褳薪褘屑 褋械褌泻邪胁邪械 蟹谢褍褔褝薪薪械"
+msgid "Windows (FAT32)"
+msgstr "袙褘写邪谢i褑褜 Windows(TM)"
-#: ../../standalone/drakfloppy:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
+msgid "Root password"
+msgstr "袩邪褉芯谢褜 写谢褟 root"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Be sure a media is present for the device %s"
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Build the disk"
+msgid "if set to yes, report unowned files."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Output"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
+"袧褟屑邪 褉邪蟹写蟹械谢邪 swap.\n"
+"\n"
+"校褋褢 邪写薪芯 锌褉邪褑褟谐胁邪褑褜?"
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Remove a module"
-msgstr "袗写胁邪褉芯褌薪褘 锌邪褉邪写邪泻 褋褌邪褉芯薪邪泻"
-
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Add a module"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "Server IP missing!"
+msgstr "I屑褟 锌褉褘薪褌褝褉褍"
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "omit scsi modules"
-msgstr "袪褝卸褘屑 蟹谢褍褔褝薪薪褟"
+msgid "Suriname"
+msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "if needed"
+msgid "Enable ACPI"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "omit raid modules"
+msgid "Graphical Environment"
msgstr ""
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "force"
-msgstr "袩械褉邪薪芯褋"
-
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
+msgid "Gibraltar"
msgstr ""
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Expert Area"
-msgstr "协泻褋锌械褉褌"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "kernel version"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "袩邪 写邪屑邪褳谢械薪薪褞"
-
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "General"
-msgstr "袗谐褍谢褜薪褘"
+msgid "on Tape Device"
+msgstr "袩芯褉褌 锌褉褘薪褌褝褉褍"
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "boot disk creation"
-msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Do nothing"
+msgstr "效邪泻邪械褑褑邪"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "drakfloppy"
-msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
+msgid "Delete Client"
+msgstr "袟薪i褕褔褘褑褜"
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Size"
-msgstr "袩邪屑械褉: %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem type: "
+msgstr "孝褘锌 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘:"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Module name"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+msgid "Starting network..."
+msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../lang.pm:1
+#, c-format
+msgid "Vietnam"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+msgid "/_Fields description"
+msgstr "袗锌i褋邪薪薪械"
-#: ../../standalone/drakfont:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Initial tests"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "校褋褌邪谢褢褳泻邪"
+#, c-format
+msgid "Help"
+msgstr "袛邪锌邪屑芯谐邪"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "袙邪褕 邪褋邪斜i褋褌褘 褌褝谢械褎芯薪薪褘 薪褍屑邪褉"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "携泻褍褞 锌褉邪褋褌芯褉褍 蟹邪褏邪胁邪褑褜 写谢褟 Windows?"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove List"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"孝褝褋褌邪胁褘褟 褋褌邪褉芯薪泻i 邪写锌褉邪褳谢械薪褘 写褝屑邪薪褍 写褉褍泻褍.\n"
+"袩械褉邪写 褌褘屑, 褟泻 锌褉褘薪褌褝褉 蟹邪锌褉邪褑褍械, 屑芯卸邪 锌褉邪泄褋褑i 锌褝褳薪褘 褔邪褋.\n"
+"衼薪 锌褉邪褑褍械 薪邪褉屑邪谢褜薪邪?"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Selected All"
-msgstr "袗斜褟褉褘褑械 褎邪泄谢"
+msgid "Username required"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "Unselected All"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "here if no."
-msgstr ""
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "袨锌褑褘i 锌褉褘薪褌褝褉褍 SMB (Windows 9x/NT)"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "click here if you are sure."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "mkinitrd optional arguments"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "袩褉褘薪褌褝褉"
+msgid "Protocol for the rest of the world"
+msgstr "袩邪写泻谢褞褔褝薪薪械"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "袗写屑褟薪i褑褜"
+msgid "Print test pages"
+msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "写芯斜褉邪"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "64 MB or more"
+msgstr "64 袦斜 褑i 斜芯谢械泄"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ghostscript"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "袙褘斜邪褉 褉邪蟹写蟹械谢邪褳 写谢褟 褎邪褉屑邪褌邪胁邪薪薪褟"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+msgid "Not formatted\n"
+msgstr "袧械 邪写褎邪褉屑邪褌邪胁邪薪邪\n"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "About"
-msgstr "袗写屑褟薪i褑褜"
+msgid "PXE Server Configuration"
+msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Font List"
-msgstr "袣褉芯锌泻邪 屑邪薪褑i褉邪胁邪薪薪褟"
+msgid "Backup the system files before:"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"袚褝褌邪 褋褌邪薪写邪褉褌薪褘 褍蟹褉芯胁械薪褜 斜褟褋锌械泻i, 褟泻i 褉褝泻邪屑械薪写邪胁邪薪褘 写谢褟 泻邪屑锌'褞褌褝褉褍,\n"
+"褟泻i 写邪谢褍褔邪薪褘 写邪 Internet 褍 褟泻邪褋褑i 泻谢i械薪褌褍. 袛邪写邪薪褘褟 薪芯胁褘褟 锌褉邪胁械褉泻i\n"
+"斜褟褋锌械泻i."
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "袙褘写邪谢械薪薪械 胁褘斜褉邪薪褘褏 RPM-锌邪泻械褌邪褳 蟹 褋i褋褌褝屑褘"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "袩械褉褕褘 写褘褋泻邪胁芯写"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "/File/_Quit"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢邪褳"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "done"
-msgstr "袟褉芯斜谢械薪邪"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "袙褘斜邪褉 薪芯胁褘褏 锌邪屑械褉邪褳"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "邪斜屑械卸邪胁邪薪薪械"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Suppress Fonts Files"
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Faroe Islands"
+msgstr "I褋谢邪薪写褋泻i"
+
#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid "Restart XFS"
msgstr "邪斜屑械卸邪胁邪薪薪械"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "type1inst building"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save to:"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Albania"
+msgstr "I褉邪薪褋泻i"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "pfm fonts conversion"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid "British Indian Ocean Territory"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Normal Mode"
+msgstr "袟胁褘褔邪泄薪褘"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript referencing"
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer connection type"
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
+
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "No network adapter on your system!"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "小械褌泻邪:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "True Type install done"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
+msgid "Connect %s"
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "肖邪褉屑邪褌邪胁邪褑褜 写褘褋泻械褌褍"
+msgid "Restarting CUPS..."
+msgstr "邪斜屑械卸邪胁邪薪薪械"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 写邪谢褍褔褝薪薪褟 写邪 I薪褌褝褉薪褝褌褍"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "袧械 蟹薪邪泄褕谢i %s"
+msgid "Unknown|Generic"
+msgstr "袗谐褍谢褜薪褘"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "parse all fonts"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Quit"
+msgstr "袙褘褏邪写"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "Myanmar"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Auto allocate"
+msgstr "袪邪蟹屑械褉泻邪胁邪褑褜 邪褳褌邪屑邪褌褘褔薪邪"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Check bad blocks?"
+msgstr "袩褉邪胁械褉褘褑褜 薪邪 薪邪褟褳薪邪褋褑褜 写褉褝薪薪褘褏 斜谢芯泻邪褳?"
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
+msgid "Other MultiMedia devices"
+msgstr "袉薪褕褘褟"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 屑邪谐褔褘屑邪"
+msgid "No remote machines"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication NIS"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟 NIS"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
-"校褋械 邪写泻邪薪褎褨谐褍褉邪胁邪薪邪.\n"
-"袟邪褉邪蟹 胁褘 屑芯卸邪褑械 褋褍屑械褋薪邪 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 锌邪写泻谢褞褔褝薪薪械 写邪 Internet\n"
-"蟹 褨薪褕褘屑褨 泻邪屑锌'褞褌褝褉邪屑褨 褳 胁邪褕邪泄 袥袙小, 泻邪褉褘褋褌邪褞褔褘褋褟 邪褳褌邪屑邪褌褘褔薪褘屑\n"
-"泻邪薪褎褨谐褍褉邪胁邪薪薪械屑 (DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "袩褉邪斜谢械屑褘 蟹 褍褋褌邪谢褟胁邪薪薪械屑 锌邪泻械褌褍 %s"
+"袨锌褑褘褟 ``袗斜屑械卸邪胁邪薪薪械 芯锌褑褘褟褳 泻邪屑邪薪写薪邪谐邪 褉邪写泻褍'' 薪械 胁褘泻邪褉褘褋褌芯褳胁邪械褑褑邪 斜械蟹 锌邪褉芯谢褟"
#: ../../standalone/drakgw:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "袣邪薪褎褨谐褍褉邪褑褘褟 褋褑褝薪邪褉邪褳, 褍褋褌邪谢褟胁邪薪薪械 袩袟, 蟹邪锌褍褋泻 褋谢褍卸斜邪褳..."
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Configuring..."
-msgstr "袧邪褋褌褉芯泄泻邪 IDE"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 屑邪谐褔褘屑邪"
-#: ../../standalone/drakgw:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "袩邪褌褝薪褑褘泄薪褘 邪写褉邪褋 袥袙小 泻邪薪褎谢i泻褌褍械 蟹 斜褟谐褍褔邪泄 泻邪薪褎i谐褍褉邪褑褘褟泄 %s!\n"
+msgid "Card IO_0"
+msgstr "IO_0 泻邪褉褌褘"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "United Arab Emirates"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Card IO_1"
+msgstr "IO_1 泻邪褉褌褘"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
+msgid "Thailand"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid "Kazakhstan"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
+#: ../../install_steps_newt.pm:1
+#, c-format
+msgid "Mandrake Linux Installation %s"
+msgstr "校褋褌邪谢褟胁邪薪薪械 Mandrake Linux %s"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP 褋械褉胁械褉邪 SMB"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Thai keyboard"
+msgstr "孝邪泄褋泻邪褟 泻谢邪胁i褟褌褍褉邪"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP 褋械褉胁械褉邪 SMB"
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr "袩邪褉邪屑械褌褉褘 泻邪屑褍褌邪胁邪薪邪谐邪 蟹谢褍褔褝薪薪褟 (Dialup)"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "褋械褌泻邪胁邪褟 泻邪褉褌邪 薪械 蟹薪芯泄写蟹械薪邪"
-
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
+"Change your Cd-Rom!\n"
"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
+"袟屑褟薪i褑械 胁邪褕 Cd-Rom!\n"
+"\n"
+"袣邪谢i 谢邪褋泻邪, 褍褋褌邪褳褑械 Cd-Rom, 锌邪蟹薪邪褔邪薪褘 \"%s\", 褍 胁邪褕 写褘褋泻邪胁芯写 i 薪邪褑i褋薪i褑械 O泻 "
+"锌邪褋谢褟.\n"
+"袣邪谢i 胁褘 薪械 屑邪械褑械 褟谐芯, 薪邪褑i褋薪i褑械 袗写屑褟薪i褑褜, 泻邪斜 邪写屑褟薪i褑褜 褍褋褌邪谢褟胁邪薪薪械 蟹 谐褝褌邪谐邪 "
+"Cd."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr "袩芯谢褜褋泻i"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+msgid "Mandrake Online"
+msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No (experts only)"
+msgid "\t-Network by webdav.\n"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
-
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
+"袧i 胁芯写薪褘 ethernet 褋械褌泻邪胁褘 邪写邪锌褌邪褉 褍 胁邪褕邪泄 褋i褋褌褝屑械 薪械 胁褘蟹薪邪褔邪薪褘. 袣邪谢i 谢邪褋泻邪, "
+"褋泻邪褉褘褋褌邪泄褑械 泻邪薪褎i谐褍褉邪褑褘泄薪褘 i薪褋褌褉褍屑褝薪褌."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
+#, c-format
+msgid "Netmask"
+msgstr "袦邪褋泻邪 褋械褌泻i"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "袦邪薪i褌芯褉 锌邪泻褍谢褜 薪械 薪邪褋褌褉芯械薪褘"
+msgid "No hard drives found"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褋械褌泻邪胁褘 邪写邪锌褌邪褉, 褟泻褨 斜褍写蟹械 胁褘泻邪褉褘褋褌邪薪褘 写谢褟 写邪谢褍褔褝薪薪褟 写邪 "
-"胁邪褕邪泄 谢邪泻邪谢褜薪邪泄 褋械褌泻i."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
+msgid "2 buttons"
+msgstr "2 泻薪芯锌泻i"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Network interface"
-msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+msgid "What kind is your ISDN connection?"
+msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"袧i 胁芯写薪褘 ethernet 褋械褌泻邪胁褘 邪写邪锌褌邪褉 褍 胁邪褕邪泄 褋i褋褌褝屑械 薪械 胁褘蟹薪邪褔邪薪褘. 袣邪谢i 谢邪褋泻邪, "
-"褋泻邪褉褘褋褌邪泄褑械 泻邪薪褎i谐褍褉邪褑褘泄薪褘 i薪褋褌褉褍屑褝薪褌."
+msgid "Label"
+msgstr "袦械褌泻邪"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+msgid "Save on floppy"
+msgstr "袟邪褏邪胁邪薪薪械 薪邪 写褘褋泻械褌褍"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
+msgid "Printer auto-detection"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "携泻邪褟 褳 胁邪褋 ISDN 泻邪褉褌邪?"
+
+#: ../../services.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS - 谐褝褌邪 胁褟写芯屑褘 锌褉邪褌邪泻芯谢 写谢褟 写芯褋褌褍锌褍 写邪 褎邪泄谢邪褳 锌褉邪蟹 TCP/IP 褋械褌泻i.\n"
+"袚褝褌邪褟 褋谢褍卸斜邪 蟹邪斜褟褋锌械褔胁邪械褑褑邪 NFS 褋械褉胁械褉邪屑, 褟泻i 泻邪薪褎i谐褍褉褘褉褍械褑邪 锌褉邪蟹\n"
+"/etc/exports 褎邪泄谢."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+msgid "Msec"
+msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "袙邪褕 胁褘斜邪褉? (蟹屑芯褳褔邪薪薪械 %s) "
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"袙邪褕 泻邪屑锌'褞褌邪褉 屑芯卸邪 斜褘褑褜 褋泻邪薪褎褨谐褍褉邪胁邪薪褘 薪邪 褋褍屑械褋薪邪械 胁褘泻邪褉褘褋褌邪薪薪械\n"
-" 袉薪褌褝褉薪褝褌褍 (Internet Connection Sharing)?\n"
+"校褋械 褉邪蟹写蟹械谢褘, 褟泻褨褟 斜褘谢褨 褌芯谢褜泻褨 胁褘蟹薪邪褔邪薪褘 锌邪胁褨薪薪褘 斜褘褑褜\n"
+"邪写褎邪褉屑邪褌邪胁邪薪褘 (褎邪褉屑邪褌邪胁邪褑褜 - 蟹薪邪褔褘褑褜 褋褌胁邪褉褘褑褜 褎邪泄谢邪胁邪褞 褋褨褋褌褝屑褍).\n"
"\n"
-"袟邪褳胁邪谐邪: 胁邪屑 锌邪褌褉褝斜薪褘 褋械褌泻邪胁褘 邪写邪锌褌邪褉 写谢褟 锌邪写泻谢褞褔褝薪薪褟 写邪 袥袙小.\n"
"\n"
-"袙褘 卸邪写邪械褑械 褍褋褌邪谢褟胁邪褑褜 褋褍屑械褋薪褘 写芯褋褌褍锌 写邪 Internet?"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 屑邪谐褔褘屑邪"
+"校 褌芯泄 卸邪 褔邪褋, 胁褘 屑芯卸邪褑械 锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褍卸芯 褨褋薪褍褞褔褘褟 褉邪蟹写蟹械谢褘, 泻邪斜 褋褑褢褉褑褨\n"
+"写邪写蟹械薪褘褟 褟泻褨褟 褟薪褘 褳褌褉褘屑谢褨胁邪褞褑褜. 袣邪谢褨 胁褘 卸邪写邪械褑械 蟹褉邪斜褨褑褜 谐褝褌邪, 邪斜褟褉褘褑械 "
+"褉邪蟹写蟹械谢褘\n"
+"褟泻褨褟 卸邪写邪械褑械 邪写褎邪褉屑邪褌邪胁邪褑褜.\n"
+"\n"
+"\n"
+"袟邪褳胁邪卸褑械, 胁褘 锌邪胁褨薪薪褘 锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褍褋械 褋褌胁芯褉邪薪褘褟 褉邪蟹写蟹械谢褘. 袙褘 锌邪胁褨薪薪褘\n"
+"锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褉邪蟹写蟹械谢褘, 褟泻褨褟 褳褌褉褘屑谢褨胁邪褞褑褜 邪锌械褉邪褑褘泄薪褍褞 褋褨褋褌褝屑褍 (褌褘锌褍 \"/"
+"\",\n"
+"\"/usr\" 褑褨 \"/var\"), 邪谢械 薪械 锌邪胁褨薪薪褘 锌械褉邪褎邪褉屑邪褌邪胁邪褑褜 褉邪蟹写蟹械谢褘, 褟泻褨褟 "
+"褍褌褉褘屑谢褨胁邪褞褑褜\n"
+"写邪写蟹械薪褘褟, 褟泻褨褟 胁褘 卸邪写邪械褑械 蟹邪褏邪胁邪褑褜 (蟹胁褘褔邪泄薪邪 /home).\n"
+"\n"
+"\n"
+"袣邪谢褨 谢邪褋泻邪, 斜褍写蟹褑械 褳胁邪卸谢褨胁褘褟, 邪斜褨褉邪褞褔褘 褉邪蟹写蟹械谢褘, 斜芯 锌邪褋谢褟 褎邪褉屑邪褌邪胁邪薪薪褟\n"
+"褍褋械 写邪写蟹械薪褘褟 斜褍写褍褑褜 薪械蟹胁邪褉芯褌薪邪 胁褘写邪谢械薪褘褟.\n"
+"\n"
+"\n"
+"袧邪褑褨褋薪褨褑械 \"孝邪泻\" 泻邪谢褨 胁褘 谐邪褌芯胁褘褟 褎邪褉屑邪褌邪胁邪褑褜 褉邪蟹写蟹械谢褟.\n"
+"\n"
+"\n"
+"袧邪褑褨褋薪褨褑械 \"袗写屑械薪邪\" 泻邪谢褨 卸邪写邪械褑械 邪斜褉邪褑褜 褨薪褕褘褟 褉邪蟹写蟹械谢褘 写谢褟 "
+"褍褋褌邪谢褟胁邪薪薪褟胁邪褕邪泄\n"
+"薪芯胁邪泄 邪锌械褉邪褑褘泄薪邪泄 褋褨褋褌褝屑褘 Mandrake Linux."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr ""
+msgid "French"
+msgstr "肖褉邪薪褑褍蟹褋泻i"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "dismiss"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "效械褕褋泻i (QWERTY)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "reconfigure"
-msgstr "袧邪褋褌褉芯泄泻邪 X Window"
+msgid "Hardware probing in progress"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "enable"
-msgstr "孝邪斜谢i褑邪"
+msgid "Net Device"
+msgstr "小械褉胁械褉 写褉褍泻褍"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Summary"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 蟹邪斜邪褉芯薪械薪邪"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 蟹邪斜邪褉芯薪械薪邪"
+msgid "Next"
+msgstr "孝褝泻褋褌"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "袙褘蟹薪邪褔褝薪薪械 锌褉褘谢邪写邪褳..."
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 褳褋褌邪谢褟胁邪褑褜 锌邪褔邪褌泻芯胁褘 蟹邪谐褉褍蟹褔褘泻?"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "disable"
-msgstr "孝邪斜谢i褑邪"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
"\n"
-"What would you like to do?"
+"Welcome.\n"
+"\n"
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 屑邪谐褔褘屑邪"
-
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Puerto Rico"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Path"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group :"
-msgstr "袩褉邪褑芯褳薪邪褟 谐褉褍锌邪"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user :"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "袗褋邪斜i褋褌褘 胁褘斜邪褉 锌邪泻械褌邪褳"
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "袥i褌芯褳褋泻i \"薪褍屑邪褉 褉邪写泻邪\" QWERTY"
-#: ../../standalone/drakperm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid ""
+"The following packages will be removed to allow upgrading your system: %s\n"
+"\n"
+"\n"
+"Do you really want to remove these packages?\n"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
+msgid "Anguilla"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr ""
+msgid "NIS Domain"
+msgstr "NIS Domain"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-UID"
+"\n"
+"- User Files:\n"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "sticky-bit"
+msgid "Antarctica"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Property"
-msgstr "袩芯褉褌"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "袙械褉褋i褟: %s\n"
-
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Current user"
-msgstr "袩褉褘薪褟褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "Mount options"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "browse"
+msgid "Jamaica"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Edit current rule"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "edit"
-msgstr "小褟褉褝写薪i"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "袟薪i褕褔褘褑褜"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "I屑褟 写褉褍泻邪褉泻i"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Down"
-msgstr "袟褉芯斜谢械薪邪"
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Please wait, preparing installation..."
+msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Czech (QWERTZ)"
+msgstr "效械褕褋泻i (QWERTZ)"
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Track network card id (useful for laptops)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "The port number should be an integer!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "permissions"
-msgstr "袪邪蟹写蟹械谢 %s"
+msgid "You must choose an image file first!"
+msgstr "URI 锌褉褘薪褌褝褉褍"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "group"
-msgstr "袩褉邪褑芯褳薪邪褟 谐褉褍锌邪"
+msgid "Restore from Hard Disk."
+msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Add to LVM"
+msgstr "袛邪写邪褑褜 写邪 LVM"
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "DNS server"
+msgstr "DNS 褋械褉胁械褉"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+#: ../../lang.pm:1
+#, c-format
+msgid "Trinidad and Tobago"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "simple"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Clear all"
+msgstr "袗褔褘褋褑i褑褜 褍褋褢"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
+msgid "No test pages"
+msgstr "孝邪泻, 薪邪写褉褍泻邪胁邪褑褜 邪斜械写蟹胁械 褋褌邪褉芯薪泻i 褌褝泻褋褌褍"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "Adapter %s: %s"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP end ip"
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid "Unknown model"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "小械褌泻邪胁褘 i薪褌褝褉褎械泄褋"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褋械褌泻邪胁褘 邪写邪锌褌邪褉, 褟泻i 锌谢邪薪褍械褑械 胁褘泻邪褉褘褋褌芯褳胁邪褑褜 写谢褟 "
-"写邪谢褍褔褝薪薪褟 写邪 i薪褌褝褉薪褝褌"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"袙邪褕 泻邪屑锌'褞褌邪褉 屑芯卸邪 斜褘褑褜 褋泻邪薪褎褨谐褍褉邪胁邪薪褘 薪邪 褋褍屑械褋薪邪械 胁褘泻邪褉褘褋褌邪薪薪械\n"
-" 袉薪褌褝褉薪褝褌褍 (Internet Connection Sharing)?\n"
-"\n"
-"袟邪褳胁邪谐邪: 胁邪屑 锌邪褌褉褝斜薪褘 褋械褌泻邪胁褘 邪写邪锌褌邪褉 写谢褟 锌邪写泻谢褞褔褝薪薪褟 写邪 袥袙小.\n"
-"\n"
-"袙褘 卸邪写邪械褑械 褍褋褌邪谢褟胁邪褑褜 褋褍屑械褋薪褘 写芯褋褌褍锌 写邪 Internet?"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
-
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "袟邪泻邪薪褔褝薪薪械 薪邪褋褌褉芯泄泻i"
+msgid "authentication"
+msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
+msgid "Backup Now"
+msgstr "袧邪褋褌褉. 褎邪泄谢邪胁褘褏 褋i褋褌褝屑邪褳"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+msgid "/_File"
+msgstr "肖邪泄谢褘:\n"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+msgid "Mayotte"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "袨锌褑褘i 邪写写邪谢械薪邪谐邪 锌褉褘薪褌褝褉褍 lpd"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "小褌胁邪褉褝薪薪械 写褘褋泻械褌褘 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../standalone/draksec:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+msgid "Searching for scanners ..."
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../standalone/draksec:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+msgid "Partitioning"
+msgstr "袩褉褘薪褌褝褉"
-#: ../../standalone/draksec:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " ? (蟹屑芯褳褔邪薪薪械 %s) "
+msgid "Russia"
+msgstr "袪褍褋泻i"
-#: ../../standalone/draksec:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
-"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
-"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+msgid "ethernet card(s) detected"
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+msgid "Syslog"
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/draksound:1
-#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "袪邪蟹屑械褉泻邪胁邪薪薪械"
-
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "袙褘蟹薪邪褔褝薪薪械 锌褉褘谢邪写邪褳..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "URI 锌褉褘薪褌褝褉褍"
-
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "袟谢褍褔褝薪薪械 锌褉褘薪褌褝褉褍"
+msgid "Not enough free space for auto-allocating"
+msgstr "袧械 褏邪锌邪械 锌褉邪褋褌芯褉褘 写谢褟 褋褌胁邪褉褝薪薪褟 薪芯胁褘褏 褉邪蟹写蟹械谢邪褳"
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
+msgid "Set root password"
+msgstr "袩邪褉芯谢褜 写谢褟 root"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "袗斜褟褉褘褑械 写蟹械褟薪薪械"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "校褋械 写邪写蟹械薪褘褟 褳 褉邪蟹写蟹械谢械 %s 斜褍写褍褑褜 褋褌褉邪褔邪薪褘"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "袧邪褋褌褉芯泄泻邪 褋谢褍卸斜邪褳"
+msgid "Internet connection configuration"
+msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Display logo on Console"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Choose color"
-msgstr "袗斜褟褉褘褑械 屑邪薪i褌芯褉"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
+msgid "/_About..."
+msgstr "袗写屑褟薪i褑褜"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "锌褉褘谢邪写邪"
+msgid "Bengali"
+msgstr "孝邪斜谢i褑邪"
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Preference: "
+msgstr "袩邪褉邪屑械褌褉褘: "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "Wizard..."
+msgstr "袦邪泄褋褌邪褉 褋褌胁邪褉褝薪薪褟..."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "the width of the progress bar"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "小褌胁邪褉褘褑褜 蟹邪谐褉. 写褘褋泻"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "Solomon Islands"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "(module %s)"
+msgstr "(屑芯写褍谢褜 %s)"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid "Workgroup"
+msgstr "袩褉邪褑芯褳薪邪褟 谐褉褍锌邪"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP"
+msgstr "I屑褟 锌褉褘薪褌褝褉褍"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Browse"
-msgstr "袩褉邪谐谢褟写"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Show current interface configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../standalone/draksplash:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Theme name"
-msgstr "I屑褟 写谢褟 褉邪蟹屑械褉泻邪胁邪薪邪谐邪 褉褝褋褍褉褋褍"
+msgid "Development"
+msgstr "褉邪褋锌褉邪褑芯褳褕褔褘泻"
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "袟褉芯斜谢械薪邪"
+
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "final resolution"
-msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+msgid "Web Server"
+msgstr "褋械褉胁械褉"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
+msgid "Chile"
+msgstr "袩芯褉褌 屑褘褕褘"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(褍卸芯 写邪写邪写蟹械薪邪 %s)"
-#: ../../standalone/drakxtv:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Have a nice day!"
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "Flags"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "袗褌褉褘屑邪谢邪褋褟 锌邪屑褘谢泻邪 褳锌邪褉邪写泻邪胁邪薪薪褟 锌邪泻械褌邪褳:"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Add/Del Users"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Area:"
+msgid "Host/network IP address missing."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "TV norm:"
+msgid "weekly"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "Settings"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Newzealand"
+msgid "Here is the full list of available countries"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "肖褉邪薪褑褘褟"
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "East Europe"
-msgstr "袝褳褉芯锌邪"
-
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "袝褳褉芯锌邪"
+msgid "Alternative test page (A4)"
+msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "China (broadcast)"
+msgid ""
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"袣邪谢i 胁褘 屑邪械褑械 褳褋械 CD 写褘褋泻i 褋邪 褋锌i褋邪 薪i卸褝泄, 薪邪褑i褋薪i褑械 袨泻.\n"
+"袣邪谢i 胁褘 薪械 屑邪械褑械 邪薪i 胁芯写薪邪谐邪 蟹 谐褝褌褘褏 CD 写褘褋泻邪褳, 薪邪褑i褋薪i褑械 袗写屑褟薪i褑褜.\n"
+"袣邪谢i 薪械泻邪褌芯褉褘褏 蟹 CD 写褘褋泻邪褳 薪械 屑邪械褑械, 邪写屑褟薪i褑械 i褏 胁褘写蟹褟谢械薪薪械 i 薪邪褑i褋薪i褑械 袨泻."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Japan (cable)"
+msgid "Wait please"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "袣邪薪邪写褋泻i (袣胁械斜褝泻)"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "Backup user files"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "New"
+msgstr "袧芯胁褘"
-#: ../../standalone/drakxtv:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "primary"
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d 褋械泻褍薪写邪褳"
+msgid "Load from floppy"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 写褘褋泻械褌褘"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "袧邪褋褌褍锌薪褘褟 锌邪泻械褌褘 斜褍写褍褑褜 胁褘写邪谢械薪褘"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "袧邪褉胁械卸褋泻i"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Unknown"
-msgstr "袗谐褍谢褜薪褘"
+msgid "Searching for new scanners ..."
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "unknown"
+msgid "Apache World Wide Web Server"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
-
-#: ../../standalone/harddrake2:1
#, c-format
-msgid "Run config tool"
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configure module"
-msgstr "袧邪褋褌褉芯泄泻邪 屑褘褕褘"
+msgid "select path to restore (instead of /)"
+msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Information"
-msgstr "I薪褎邪褉屑邪褑褘褟"
+msgid "Configure bootsplash picture"
+msgstr "袧邪褋褌褉芯泄泻邪 褋谢褍卸斜邪褳"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "袚谢. 邪锌i褋邪薪薪械 邪斜褋褌邪谢褟胁邪薪薪褟"
+#: ../../lang.pm:1
+#, c-format
+msgid "China"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "袙褘蟹薪邪褔褝薪薪械 卸芯褉褋褌泻邪谐邪 写褘褋泻褍"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+msgid "Georgia"
+msgstr "袧邪褉胁械卸褋泻i"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Author:"
-msgstr "袗褳褌邪锌芯褕褍泻"
+msgid "Reading data of installed printers..."
+msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "server"
+msgstr "褋械褉胁械褉"
-#: ../../standalone/harddrake2:1
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "/_About..."
-msgstr "袗写屑褟薪i褑褜"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "校褋褌邪褳褑械 写褘褋泻械褌褍 褳 写褘褋泻邪胁芯写 %s"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "/_Report Bug"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Please Wait... Applying the configuration"
+msgstr "袩褉邪胁械褉泻邪 锌邪褉邪屑械褌褉邪褳 薪邪褋褌褉芯泄泻i"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Harddrake help"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "袗锌i褋邪薪薪械"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "/_Help"
-msgstr "/_袛邪锌邪屑芯谐邪"
+msgid "Choosing a display manager"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "袙褘褏邪写"
+msgid "Zeroconf Host name"
+msgstr "I屑褟 屑邪褕褘薪褘"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP 邪写褉邪褋 锌邪胁i薪械薪 斜褘褑褜 褍 褎邪褉屑邪褑械 1.2.3.4"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Add an item"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Options"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the vendor name of the device"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 锌芯褋谢褟写芯褳薪褘 锌芯褉褌, 写邪 褟泻芯谐邪 锌邪写泻谢褞褔邪薪邪 胁邪褕邪褟 屑褘褕."
-
-#: ../../standalone/harddrake2:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "褎邪褉屑邪褌邪胁邪薪薪械"
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
+msgstr "袗斜邪谢芯薪泻邪:"
-#: ../../standalone/harddrake2:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "小械褌泻邪胁褘 锌褉褘薪褌褝褉 (TCP/Socket)"
-
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "the name of the CPU"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "I屑褟: "
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (latin)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 泻薪芯锌泻i"
+msgid "Package not installed"
+msgstr "袟邪泻邪薪褔褝薪薪械 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 泻薪芯锌泻i"
+msgid "Become a MandrakeExpert"
+msgstr "褝泻褋锌械褉褌"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
+msgid "American Samoa"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr ""
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "袨锌褑褘i 屑芯写褍谢褞:"
+msgid "Copy fonts on your system"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid "Harddrake help"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "袩芯褉褌 屑褘褕褘"
+#, c-format
+msgid "Bogomips"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "袗写褉邪褋褘 锌邪屑褟褑褨 泻邪褉褌褘 (DMA)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Media class"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "褍蟹褉芯胁械薪褜"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format of floppies supported by the drive"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "肖邪褉屑邪褌邪胁邪薪薪械"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "袙褘 薪械 屑芯卸邪褑械 胁褘谢褍褔邪褑褜 褨 邪写屑褟薪褟褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "校胁邪谐邪!"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote host name"
+msgstr "袗写写邪谢械薪褘 胁褍蟹械谢"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "deactivate now"
+msgstr "袗泻褌褘褳薪褘"
+
+#: ../../any.pm:1
#, c-format
-msgid "Halt bug"
+msgid "access to X programs"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍 薪邪 褉邪蟹写蟹械谢械 Windows"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Italy"
+msgstr "I褌邪谢褜褟薪褋泻i"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Name of printer"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "disable"
+msgstr "孝邪斜谢i褑邪"
+
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "锌邪屑褘谢泻邪 褉邪蟹屑邪薪褑i褉邪胁邪薪薪褟 %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "Cayman Islands"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select model manually"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Format"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Fdiv bug"
+msgid "Various"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
+msgid "Zip"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Flags"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Module"
-msgstr "袩芯褉褌 屑褘褕褘"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "PDQ"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "袩褉褘谢邪写邪-褕谢褞蟹"
+msgid "Albanian"
+msgstr "I褉邪薪褋泻i"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "old static device name used in dev package"
+msgid "Lithuania"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "袣邪屑锌邪泻褌薪邪"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "袗斜褟褉褘褑械 褎邪泄谢"
+msgid "Detected model: %s %s"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "This field describes the device"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Local files"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+msgid "maybe"
+msgstr "屑芯卸邪 斜褘褑褜"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid "Panama"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Monitor"
+msgstr "袦邪薪i褌芯褉"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Coma bug"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 褌褘褋褟褔 泻芯谢械褉邪褳 (16 斜i褌邪褳)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Drive capacity"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "袩邪屑械褉: %d K斜\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "锌邪屑械褉 斜谢芯泻褍"
+msgid "Remove fonts on your system"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "袟邪锌褍褋泻 X 锌褉褘 褋褌邪褉褑械 褋i褋褌褝屑褘"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Location on the bus"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "袧械写邪褋褌邪褌泻芯胁邪 褉邪蟹写蟹械谢邪褳 写谢褟 RAID 褍蟹褉芯褳薪褟 %d\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"孝褍褌 蟹屑褟褕褔邪褞褑褑邪 褔褝褉谐i 写褉褍泻褍.\n"
+"袙褘 屑芯卸邪褑械 写邪写邪褑褜 褟褕褔褝, 邪谢褜斜芯 蟹屑褟薪i褑褜 i褋薪褍褞褔褘褟."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "袗褳褌褝薪褌褘褎i泻邪褑褘褟"
+msgid "Connected"
+msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bogomips"
+msgid "Macedonian"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "袗写屑械薪邪"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "/File/_Save"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bus"
+msgid "Mali"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "袩邪写褉邪斜褟蟹薪邪褋褑i"
+
+#: ../../pkgs.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "very nice"
+msgstr "胁械谢褜屑i 写芯斜褉邪"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "袛褉褍泻 褌褝褋褌邪胁褘褏 褋褌邪褉芯薪邪泻"
+msgid "Preview"
+msgstr "锌褉褘谢邪写邪"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select media for backup..."
+msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 屑芯胁褍 写谢褟 泻邪褉褘褋褌邪薪薪褟."
+
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "袙褘 卸邪写邪械褑械 泻邪斜 BackSpace 锌褉邪褑邪胁邪褳 褍 泻邪薪褋芯谢褨 褟泻 Delete?"
+msgid "XFree86 server: %s\n"
+msgstr "小械褉胁械褉 XFree86: %s\n"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "袣邪谢i 谢邪褋泻邪, 邪斜褟褉褘褑械 褌褘锌 泻谢邪胁i褟褌褍褉褘."
+msgid "Allow Thin Clients"
+msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "袧械屑邪谐褔褘屑邪 蟹邪锌褍褋褑褨褑褜 live upgrade !!!\n"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "袚褉褍蟹i薪褋泻i (\"袪褍褋泻邪褟\" 褉邪褋泻谢邪写泻邪)"
-#: ../../standalone/livedrake:1
-#, fuzzy, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Options"
msgstr ""
-"袟屑褟薪i褑械 胁邪褕 Cd-Rom!\n"
-"\n"
-"袣邪谢i 谢邪褋泻邪, 褍褋褌邪褳褑械 Cd-Rom, 锌邪蟹薪邪褔邪薪褘 \"%s\", 褍 胁邪褕 写褘褋泻邪胁芯写 i 薪邪褑i褋薪i褑械 O泻 "
-"锌邪褋谢褟.\n"
-"袣邪谢i 胁褘 薪械 屑邪械褑械 褟谐芯, 薪邪褑i褋薪i褑械 袗写屑褟薪i褑褜, 泻邪斜 邪写屑褟薪i褑褜 褍褋褌邪谢褟胁邪薪薪械 蟹 谐褝褌邪谐邪 "
-"Cd."
-#: ../../standalone/livedrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Change Cd-Rom"
-msgstr "袟屑褟薪i褑褜 锌邪屑械褉褘 褝泻褉邪薪褍"
+msgid "Your printer model"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/localedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save as.."
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+
+#: ../../share/advertising/04-configuration.pl:1
#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "袩邪褋锌褉邪斜褍泄褑械 褟褕褔褝 褉邪蟹"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
+msgid "Save"
+msgstr "小褌邪褉褌邪胁邪械 屑械薪褞"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../services.pm:1
+#, c-format
+msgid "Load the drivers for your usb devices."
+msgstr ""
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "褎邪褉屑邪褌邪胁邪薪薪械"
+msgid "Disk"
+msgstr "袛邪褑泻i"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "URI 锌褉褘薪褌褝褉褍"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "service setting"
-msgstr "锌褉褘谢邪写邪"
+msgid "Israel"
+msgstr "I褳褉褘褌"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+msgid "French Guiana"
+msgstr "肖褉邪薪褑褍蟹褋泻i"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "锌褉褘谢邪写邪"
+#: ../../lang.pm:1
+#, c-format
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS 褋械褉胁械褉:"
+msgid "add a rule"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "A command line must be entered!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select user manually"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS 褋械褉胁械褉:"
+msgid "Transfer printer configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "小械褉胁械褉 写褉褍泻褍"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "袙褘 卸邪写邪械褑械, 泻邪斜 谐褝褌邪械 蟹谢褍褔褝薪薪械 褋褌邪褉褌邪胁邪谢邪 锌褉褘 蟹邪谐褉褍蟹褑褘?"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS 褋械褉胁械褉:"
+msgid "%s (Port %s)"
+msgstr "袩芯褉褌"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "I屑褟 写邪屑械薪褍"
+msgid "Use network connection to backup"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
-#: ../../standalone/logdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
"\n"
-"Here, you'll be able to set up the alert system.\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Accept user"
+msgstr "袩褉褘薪褟褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "袧邪褋褌褉芯泄泻邪 ADSL"
+msgid "Server"
+msgstr "褋械褉胁械褉"
-#: ../../standalone/logdrake:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Mail alert"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "袛褉褝薪薪褘 胁褘斜邪褉, 锌邪褋锌褉邪斜褍泄褑械 褟褕褔械\n"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
+msgid "Heard and McDonald Islands"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Content of the file"
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Calendar"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "袪褝卸褘屑 褝泻褋锌械褉褌褍"
-#: ../../standalone/logdrake:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Choose file"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP 邪写褉邪褋 锌邪胁i薪械薪 斜褘褑褜 褍 褎邪褉屑邪褑械 1.2.3.4"
-#: ../../standalone/logdrake:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "matching"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "袙褘 薪械 屑芯卸邪褑械 邪写屑褟薪i褑褜 胁褘谢褍褔褝薪薪械 谐褝褌邪谐邪 锌邪泻械褌褍. 衼薪 褍卸芯 褳褋褌邪谢褟胁邪薪褘"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Settings"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Driver"
+msgstr "褋械褉胁械褉"
+
+#: ../../services.pm:1
#, c-format
-msgid "A tool to monitor your logs"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on remote lpd server"
+msgstr "袗写写邪谢械薪褘 褋械褉胁械褉 lpd"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr ""
+msgid "No mouse"
+msgstr "袧褟屑邪 屑褘褕褘"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "袩褉邪胁械褉泻邪 锌邪褉褌芯褳"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "袧褟屑械褑泻i"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "User"
-msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+msgid "Austria"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/Help/_About..."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "袟谐邪褉薪褍褑褜 写褉褝胁邪"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "袧邪褋褌褉芯泄泻邪 锌邪褋谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr ""
+msgid "Configure networking"
+msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "<control>S"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "袣褍写褘 胁褘 卸邪写邪械褑械 褳褋褌邪谢褟胁邪褑褜 锌邪褔邪褌泻芯胁褘 蟹邪谐褉褍蟹褔褘泻?"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "/File/_Save"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "<control>O"
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/File/_Open"
+msgid "DHCP client"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "<control>N"
-msgstr ""
+msgid "Restoring from file %s failed: %s"
+msgstr "袗写薪邪褳谢械薪薪械 蟹 褎邪泄谢邪 %s 薪械 邪褌褉褘屑邪谢邪褋褟: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/File/_New"
-msgstr ""
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (锌邪褋谢褟写芯褳薪邪褟, 褋褌邪褉褘 褌褘锌 C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show only for the selected day"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "协屑褍谢褟胁邪褑褜 褌褉褝褑褞褞 泻薪芯锌泻褍?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "袩褉褘谢邪写邪-褕谢褞蟹"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "泻邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 褌褘锌 胁邪褕邪泄 屑褘褕褘."
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Boot Style Configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
+msgid "Automatic time synchronization"
+msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "received"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Armenian (phonetic)"
+msgstr "袗褉屑褟薪褋泻i (褎邪薪械褌褘褔薪褘)"
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "received: "
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Card model:"
+msgstr "袗写褉邪褋褘 锌邪屑褟褑褨 泻邪褉褌褘 (DMA)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "sent: "
+msgid "Thin Client"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+msgid "Start Server"
+msgstr "NIS 褋械褉胁械褉:"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "average"
+msgid "Turkmenistan"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "袧邪褋褌褉芯泄泻邪"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "All remote machines"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Install themes"
+msgstr "校褋褌邪谢褟胁邪薪薪械 褋i褋褌褝屑褘"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnection from the Internet complete."
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid "Espanol"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing installation"
+msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logs"
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
+msgid "Add User -->"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "Nauru"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "袟邪褏邪胁邪薪薪械 褳 褎邪泄谢"
+msgid "True Type fonts installation"
+msgstr "袩邪写褉褘褏褌芯褳泻邪 褳褋褌邪谢褟胁邪薪褜薪褟"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Statistics"
+msgid "Auto-detect printers connected directly to the local network"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "锌邪屑褘谢泻邪 屑邪薪褑i褉邪胁邪薪薪褟: "
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "袣邪薪褎i谐褍褉邪褑褘褟 褋械褌泻i"
+msgid "LAN configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 ADSL"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+msgid "hard disk model"
+msgstr "袗写褉邪褋褘 锌邪屑褟褑褨 泻邪褉褌褘 (DMA)"
-#: ../../standalone/scannerdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Iranian"
+msgstr "I褉邪薪褋泻i"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "袣邪谢褨 谢邪褋泻邪, 蟹褉邪斜褨褑械 薪械泻邪谢褜泻褨 褉褍褏邪褳 屑褘褕褕褍."
+msgid "Croatia"
+msgstr "啸邪褉胁邪褑泻i"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
+msgid "Gateway:"
+msgstr "楔谢褞蟹:"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+msgid "Add server"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "This machine"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "袩褉褘谢邪写邪:"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+msgid "Printerdrake"
+msgstr "袩褉褘薪褌褝褉"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr "袥褨褑褝薪蟹褨泄薪邪褟 写邪屑芯胁邪"
+
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "袙褘写邪谢i褑褜 褔邪褉谐褍 写褉褍泻褍"
+msgid "System Options"
+msgstr "袨锌褑褘i 屑芯写褍谢褞:"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the directory where backups are stored"
+msgstr ""
+
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Add host"
-msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
+msgid "Please choose the desired security level"
+msgstr "校蟹褉芯胁械薪褜 斜褟褋锌械泻i"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍"
+msgid ", USB printer"
+msgstr "I屑褟 写褉褍泻邪褉泻i"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Choose the applications that will support the fonts:"
+msgstr "袙褘斜邪褉 褉邪蟹写蟹械谢邪褳 写谢褟 褎邪褉屑邪褌邪胁邪薪薪褟"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
+msgid "Configure X"
+msgstr "袧邪褋褌褉芯泄泻邪 X Window"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "孝褍褉褝褑泻i (褌褉邪写褘褑褘褢薪邪褟 \"F\" 屑邪写褝谢褜)"
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid "Congratulations!"
+msgstr "袩褉褘屑褨褑械 胁i薪褕邪胁邪薪薪i!"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Use owner id for execution"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "袩褉褘薪褌褝褉"
+msgid "Down"
+msgstr "袟褉芯斜谢械薪邪"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "校褋褌邪谢褢褳泻邪"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+msgid "Time remaining "
+msgstr "袟邪褋褌邪谢芯褋褟 褔邪褋褍 "
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "UK keyboard"
+msgstr "UK 泻谢邪胁i褟褌褍褉邪"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "袪邪蟹屑邪薪褑i褉邪胁邪褑褜"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+msgid "Uninstall Fonts"
+msgstr "袙褘写邪谢械薪薪械 胁褘斜褉邪薪褘褏 RPM-锌邪泻械褌邪褳 蟹 褋i褋褌褝屑褘"
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "袩褉褘薪褌褝褉"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add a scanner manually"
+msgid "German (no dead keys)"
+msgstr "袧褟屑械褑泻i (薪褟屑邪 蟹邪斜谢邪泻i褉邪胁邪薪褘褏 泻谢邪胁i褕)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 褌褘褋褟褔褘 泻芯谢械褉邪褳 (15 斜i褌邪褳)"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+msgid "Reboot"
+msgstr "Root"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr ""
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
+msgid "Mandrake Control Center"
+msgstr "袛邪谢褍褔褝薪薪械 写邪 I薪褌褝褉薪褝褌褍"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose device"
-msgstr "袟邪谐褉褍蟹邪褔薪邪褟 锌褉褘谢邪写邪"
+msgid "\t-Tape \n"
+msgstr "孝褘锌: "
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "袛邪褋褌褍锌薪褘褟 锌邪泻械褌褘"
+msgid "Remember this password"
+msgstr "袧褟屑邪 锌邪褉芯谢褞"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "袗写写邪谢械薪褘 锌褉褘薪褌褝褉"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "小褍屑械褋薪邪械 I薪褌褝褉薪褝褌-蟹谢褍褔褝薪薪械 蟹邪褉邪蟹 屑邪谐褔褘屑邪"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "袙褘泻邪褉褘褋褌芯褳胁邪褑褜 薪械蟹邪薪褟褌褍褞 锌褉邪褋褌芯褉褍 薪邪 褉邪蟹写蟹械谢械 Windows"
+
#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "袞邪写邪械褑械 薪邪褋褌褉芯i褑褜 锌褉褘薪褌褝褉?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "The %s is unsupported"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "XFree86 driver: %s\n"
+msgstr "小械褉胁械褉 XFree86: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "袩芯褉褌"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "袙褘斜邪褉 锌邪泻械褌邪褳 写谢褟 褳褋褌邪谢褟胁邪薪薪褟"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ", "
+msgid "Papua New Guinea"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+msgid "Serbian (cyrillic)"
+msgstr "袗蟹械褉斜邪泄写卸邪薪褋泻褨 (泻褨褉褘谢褨褑邪)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " ("
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "袞邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 写褉褍泻?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "袞邪写邪械褑械 薪邪褋褌褉芯i褑褜 锌褉褘薪褌褝褉?"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "小褌胁邪褉褝薪薪械 蟹邪谐褉褍蟹邪褔薪邪泄 写褘褋泻械褌褘"
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+msgid "Wait please, testing your connection..."
+msgstr "携泻i 褌褘锌 胁邪褕邪谐邪 ISDN 蟹谢褍褔褝薪薪褟?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
-#: ../../standalone/service_harddrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Login ID"
+msgstr "I屑褟 (login ID)"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS - 谐褝褌邪 胁褟写芯屑褘 锌褉邪褌邪泻芯谢 写谢褟 写芯褋褌褍锌褍 写邪 褎邪泄谢邪褳 锌褉邪蟹 TCP/IP\n"
+"褋械褌泻i. 袚褝褌邪褟 褋谢褍卸斜邪 褳锌谢褘胁邪械 薪邪 薪邪褟褳薪邪褋褑褜 褋褍胁褟蟹i 锌邪屑i卸 NFS 褎邪泄谢邪屑i."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Welcome to the Open Source world."
+msgid "DHCP Client"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid "dismiss"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "袗写谢褍褔褝薪薪械 邪写 褋械褌泻i"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+msgid "omit raid modules"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd - 谐褝褌褘 写褝屑邪薪 写褉褍泻褍, 锌邪褌褉褝斜薪褘 写谢褟 泻邪褉褝泻褌薪邪泄 锌褉邪褑褘 lpr. 袚褝褌邪\n"
+"褋械褉胁械褉, 褟泻i 泻i褉褍械 锌褉邪褑邪泄 锌褉褘薪褌褝褉褍(邪褳)."
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet Connection Configuration"
+msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
-#: ../../share/advertising/03-software.pl:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+msgid "comma separated numbers"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
+msgid "Move selected rule up one level"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
-#, c-format
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "校 胁邪褕邪泄 褋褨褋褌褝屑械 薪褟屑邪 薪i胁芯写薪邪谐邪 褋械褌泻邪胁邪谐邪 邪写邪锌褌邪褉邪!"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "袧邪褋褌褉芯泄泻邪 蟹谢褍褔褝薪薪褟 蟹 I薪褌褝褉薪褝褌邪屑"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "笑i 卸邪写邪械褑械 锌褉邪褌褝褋褑i褉邪胁邪褑褜 薪邪褋褌褉芯泄泻i?"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "I can't find any room for installing"
+msgstr "袛邪写邪褑褜 褉邪蟹写蟹械谢 薪械屑邪谐褔褘屑邪"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Modify RAID"
+msgstr "袟屑褟薪i褑褜 RAID"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"袙褘蟹薪邪褔邪薪邪 ISDN PCI 泻邪褉褌邪, 邪谢械 薪械胁褟写芯屑褘 褟械 褌褘锌. 袣邪谢i 谢邪褋泻邪, 锌邪蟹薪邪褔褑械 PCI "
+"泻邪褉褌褍 薪邪 薪邪褋褌褍锌薪褘屑 褝泻褉邪薪械."
-#: ../../share/advertising/06-development.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Add user"
+msgstr "袛邪写邪褑褜 泻邪褉褘褋褌邪谢褜薪i泻邪"
-#: ../../share/advertising/07-server.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAID-写褘褋泻i %s\n"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "锌邪褋谢褟写芯褳薪邪褟"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "袙褘斜邪褉 泻谢邪胁i褟褌褍褉褘"
-#: ../../share/advertising/08-store.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+msgid "Format partitions"
+msgstr "肖邪褉屑邪褌邪胁邪薪薪械 褉邪蟹写蟹械谢邪褳"
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "袧邪褋褌褉芯泄泻邪 屑邪写褝屑褍"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "效褘褌邪褞 斜邪蟹褍 写邪写蟹械薪褘褏 写褉邪泄胁械褉芯褳 CUPS"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "袩褉褘薪褌褝褉"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "I屑褟 褎邪泄谢褍 胁i褉褌褍邪谢褜薪邪泄 褎邪泄谢邪胁邪泄 褋i褋褌褝屑褘: %s"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "袛邪 褟泻芯谐邪 锌邪褋谢褟写芯褳薪邪谐邪 锌芯褉褌褍 写邪谢褍褔邪薪褘 屑邪写褝屑?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "袟邪褌褉褘屑泻邪 锌械褉邪写 蟹邪谐褉褍蟹泻邪泄 胁芯斜褉邪蟹褍 锌邪 写邪屑邪褳谢械薪薪褞"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "袧邪褑褨褋薪褨褑械 薪邪 褉邪蟹写蟹械谢"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "I屑褟 泻邪褉褘褋褌邪谢褜薪i泻褍:"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "袛褉褝薪薪褘 褎邪泄谢 褉褝蟹械褉胁芯胁邪泄 泻芯锌ii"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configure"
+msgstr "袧邪褋褌褉芯泄泻邪 X Window"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "袗斜褟褉褘褑械 胁i写褝邪泻邪褉褌褍"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid ""
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"校胁褟写蟹i褑械 i屑褟 褋胁邪褢泄 屑邪褕褘薪褘 (host).\n"
+"I屑褟 胁邪褕邪泄 屑邪褕褘薪褘 锌邪胁i薪薪邪 斜褘褑褜 蟹邪写邪写蟹械薪邪 锌芯褳薪邪褋褑褞,\n"
+"薪邪锌褉褘泻谢邪写 ``mybox.mylab.myco.com''.\n"
+"袙褘 屑芯卸邪褑械 褌邪泻褋邪屑邪 褳胁械褋褑i IP 邪写褉邪褋 褕谢褞蟹褍, 泻邪谢i 褢薪 褍 胁邪褋 褢褋褑褜."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "袙褘斜邪褉 褌褘锌褍 蟹谢褍褔褝薪薪褟 锌褉褘薪褌褝褉褍"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "小褌胁邪褉褝薪薪械 薪芯胁邪谐邪 褉邪蟹写蟹械谢褍"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "袥邪泻邪谢褜薪褘 锌褉褘薪褌褝褉"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"袧械泻邪褌芯褉褘褟 胁邪卸薪褘褟 锌邪泻械褌褘 薪械 斜褘谢i 褳褋褌邪谢褟胁邪薪褘 泻邪褉褝泻褌薪邪.\n"
+"袛褉褍谐i 胁邪褕 cdrom 写褘褋泻 褑i 胁邪褕 cdrom 屑邪褞褑褜 写褝褎械泻褌褘.\n"
+"袩褉邪胁械褉褑械 cdrom 薪邪 胁邪褕褘屑 泻邪屑锌褍褌邪褉褘, 胁褘泻邪褉褘褋褌芯褳胁邪褞褔褘\"rpm -qpl Mandrake/RPMS/*."
+"rpm\"\n"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "袛褍斜谢褟胁邪薪薪械 锌褍薪泻褌褍 屑邪薪褑i褉邪胁邪薪薪褟 %s"
+
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run the daily security checks."
+msgstr ""
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "褝泻褋锌械褉褌"
+msgid "Azerbaijan"
+msgstr "I褉邪薪褋泻i"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr "携泻 锌褉褘薪褌邪褉 写邪谢褍褔邪薪褘?"
+
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "褝泻褋锌械褉褌"
+msgid "Security level"
+msgstr "袧邪褋褌褉芯泄泻i 褳蟹褉芯褳薪褟 斜褟褋锌械泻i"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "袩邪屑械褉褘 褝泻褉邪薪褍"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services"
+msgstr "锌褉褘谢邪写邪"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 袦斜"
#: ../../share/compssUsers:999
#, fuzzy
@@ -17024,11 +17062,6 @@ msgstr ""
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Workstation"
-msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
-
-#: ../../share/compssUsers:999
-#, fuzzy
msgid "Game station"
msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
@@ -17108,10 +17141,6 @@ msgstr ""
"褨薪褋褌褉褍屑械薪褌邪谢褜薪褘褏 褋褉芯写泻邪褳"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
#, fuzzy
msgid "Gnome Workstation"
msgstr "袧邪胁褍泻芯胁褘褟 锌褉褘泻谢邪写邪薪薪褨"
@@ -17133,11 +17162,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""
#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "褉邪褋锌褉邪褑芯褳褕褔褘泻"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "袘褨斜谢褨褟褌褝泻褨 褨 锌褉邪谐褉邪屑褘 写谢褟 褉邪褋锌褉邪褑芯褳泻褨 薪邪 小 褨 小++"
@@ -17211,40 +17235,88 @@ msgstr ""
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"袩褉褘泻谢邪写邪薪薪褨 写谢褟 褔褘褌邪薪薪褟 褨 邪写锌褉邪褳泻褨 锌芯褕褌褘 褨 薪邪胁褨薪邪褳 (pine, mutt, tin...), "
+"Web 邪谐谢褟写邪谢褜薪褨泻褨"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "I薪褌褝褉薪褝褌 蟹谢褍褔褝薪薪械 i 泻邪薪褎i谐褍褉邪褑褘褟"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "袪褝写邪泻褌邪褉褘 褨 锌褉邪泄谐褉邪胁邪谢褜薪褨泻褨 谐褍泻褍 褨 胁褨写褝邪"
+#~ msgid "Configure the connection"
+#~ msgstr "袧邪褋褌褉芯泄泻邪 褋械褌泻i"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
+#~ msgid "Disconnect"
+#~ msgstr "袧邪褋褌褉芯泄泻邪 ISDN"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "袪褝写邪泻褌邪褉褘 褨 锌褉邪泄谐褉邪胁邪谢褜薪褨泻褨 谐褍泻褍 褨 胁褨写褝邪"
+#~ msgid "Connect"
+#~ msgstr "I屑褟 蟹谢褍褔褝薪薪褟"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "袚褉邪褎褨褔薪褘褟 锌褉邪谐褉邪屑褘 褌褘锌褍 The Gimp"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"袩褉褘泻谢邪写邪薪薪褨 写谢褟 褔褘褌邪薪薪褟 褨 邪写锌褉邪褳泻褨 锌芯褕褌褘 褨 薪邪胁褨薪邪褳 (pine, mutt, tin...), "
-"Web 邪谐谢褟写邪谢褜薪褨泻褨"
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "携泻 胁褘 锌谢邪薪褍械褑械 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "袙褘 屑芯卸邪褑械 邪写泻谢褞褔褘褑褑邪 褑褨 锌械褉邪泻邪薪褎褨谐褍褉邪胁邪褑褜 胁邪褕邪械 蟹谢褍褔褝薪薪械."
+
+#, fuzzy
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "携泻 胁褘 锌谢邪薪褍械褑械 写邪谢褍褔褘褑褑邪 写邪 I薪褌褝褉薪褝褌褍?"
+
+#, fuzzy
+#~ msgid "Write %s"
+#~ msgstr "小械褉胁械褉 XFree86 %s"
+
+#, fuzzy
+#~ msgid "Author:"
+#~ msgstr "袗褳褌邪锌芯褕褍泻"
+
+#, fuzzy
+#~ msgid "Audio station"
+#~ msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
+
+#, fuzzy
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "袪褝写邪泻褌邪褉褘 褨 锌褉邪泄谐褉邪胁邪谢褜薪褨泻褨 谐褍泻褍 褨 胁褨写褝邪"
+
+#, fuzzy
+#~ msgid "Video station"
+#~ msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "袪褝写邪泻褌邪褉褘 褨 锌褉邪泄谐褉邪胁邪谢褜薪褨泻褨 谐褍泻褍 褨 胁褨写褝邪"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "袦褍谢褜褌褘屑械写褘褟 - 谐褍泻"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "袚褉邪褎褨褔薪褘褟 锌褉邪谐褉邪屑褘 褌褘锌褍 The Gimp"
#, fuzzy
#~ msgid "Printer sharing"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
index 10964709c..f6e7d7368 100644
--- a/perl-install/share/po/bg.po
+++ b/perl-install/share/po/bg.po
@@ -3,1014 +3,1689 @@
# Copyright (c) 2000 MandrakeSoft
# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000.
# Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>, 2003
+# Boyan Ivanov <boyan17@bulgaria.com>, 2003
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-bg\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-02-19 20:42+0200\n"
-"Last-Translator: Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>\n"
-"Language-Team: Bulgarian <bg@li.org>\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-04-26 15:27+0300\n"
+"Last-Translator: Boyan Ivanov <boyan17@bulgaria.com>\n"
+"Language-Team: Bulgarian\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CP1251\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0\n"
+"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "橡弪疋囗 磬 腩忮蝈 玎 磬扈疣礤 磬 蝾麝 磬 祛眚桊囗"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "镱痱 磬 祓彐钼 镳桧蝈 "
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "央铈弪 綦铒 滂耜弪:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"绣珏疴磬蜞 蜞犭桷 磬 腩忮蝈 礤 聱 聱蜞 泐脲扈磬\n"
+"泥 镳钿驵 腓 怦 镟 ?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "悟赅"
+msgid "Which username"
+msgstr "暑 镱蝠遽栩咫耜 桁"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "羊囵蜩疣 userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "枢犏 蜩 桧纛痨圉 桉赅蝈 溧 镳栳噔栩"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "满珩蜞眍忤 蜞犭桷囹 腩忮蝈"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "袜 CUPS 聱疴 \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "央邃 桧耱嚯圉桀眄 磬耱痤殛"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "蚂羼蝾 蝾忄 桤镱腌忄轵 ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "妈"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"锐赅蝈 腓 溧 镱玮铍栩 磬 镱蝠遽栩咫 溧 镱溴 蝈蹴栩 滂疱牝铕梃?\n"
-"朽琊屮噔囗弪 磬 蝾忄  镱玮铍 磬 镱蝠遽栩咫栩 镳铖蝾 溧 鳅觏囹 磬 "
-"\"项溴\" konqueror 桦 nautilus.\n"
"\n"
-"\"孰桢眚耜郳" 镱玮铍忄 玎 镱蝠遽栩咫 磬耱痤殛.\n"
+"漾 蜞赅, 镳桧蝈痂 磬耱痤屙 PPD 羿殡钼 镳邃铖蜞忮龛 铗 镳铊玮钿栩咫栩 "
+"桁 桦 铕桡桧嚯龛 CUPS 漯嚅忮痂 礤 祛汔 溧 狷溧 镳艴恸痣龛."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "青潸腈栩咫龛 镟赍 %s 腓锺忄"
+msgid "Sri Lanka"
+msgstr "仞 肃黻"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"妈 祛驽 溧 尻耧铕蜩疣蝈 赅蝾 桤镱腌忄蝈 NFS 桦 Samba. 填, 桤徨疱蝈 赅赈 "
-"桉赅蝈 溧 桤镱腌忄蝈."
+"央邃龛 镳桧蝈餦n"
+"\n"
+"%s%s\n"
+" 滂疱牝眍 疋玎龛 犏 忄蜞 耔耱屐"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "Central African Republic"
+msgstr "皱眚疣腠钹麴桕囗耜 绣矬犭桕"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Gateway 篑蝠铋耱忸"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
msgstr ""
-"相赍 %s 蝠徕 溧 狷溴 桧耱嚯桊囗\n"
-"锐赅蝈 溧 泐 桧耱嚯桊囹?"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Custom"
-msgstr "孰桢眚耜"
+msgid "Ethernetcard"
+msgstr "Ethernet 赅痱"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Allow all users"
-msgstr "项玮铍忄 磬 镱蝠遽栩咫"
+msgid "Parameters"
+msgstr "相疣戾蝠"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No sharing"
-msgstr "湾 镱溴"
+msgid "Auto-detect"
+msgstr "棱蝾爨蜩黜 玎耔鬣礤"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "矽"
+msgid "Interface:"
+msgstr "软蝈痿彘:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "膨 嵇脲 耧桉 磬 漕耱瘊镯栩 耱疣龛"
+msgid "Select installation class"
+msgstr "如犷 磬 觌囫 桧耱嚯圉"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose your country."
-msgstr "填, 桤徨疱蝈 忄蜞 耱疣磬."
+msgid "on CDROM"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "需楮"
+#: ../../network/tools.pm:1
+#, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"谚耱屐囹 礤 桤汶彐溧 疋玎磬 犏 软蝈痦弪.\n"
+"物栩嚅蝈 皴 溧 镳屙囫蝠铊蝈 怵赅蜞."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Country"
-msgstr "羊疣磬"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"砚玮 忄 镳桧蝈 犏 Linux 聱疴 镱玮铍忄 Windows 爨龛 溧 皴 "
+"疋玮囹 犏 礤泐 赅蝾 觌桢眚.\n"
+"\n"
+"锐赅蝈 腓, 溧 镳钿骅蝈 磬耱痤殛栩 玎 蝾玷 镳桧蝈 赅牝 镳噔艴蝈 漕 皴汔?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "如犷 磬 彗桕"
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "铃豚痼"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "如镱腌忄 箜桕钿 镱 镱漯噻徼疣礤"
+msgid "Error writing to file %s"
+msgstr "灭屮赅 镳 玎镨 恸 羿殡 %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux 祛驽 溧 镱潸疰 祉钽 彗桷. 如徨疱蝈\n"
-"彗桷栩 觐栩 桉赅蝈 噤 桧耱嚯桊囹. 义  狷溧 磬腓黜 耠邃\n"
-"赅蝾 玎恸瘌 桧耱嚯圉蜞 忤 镳羼蜞痱桊囹 耔耱屐囹."
+"apmd 皴 桤镱腌忄 玎 磬犭屙桢 磬 徉蝈痂蜞 玎镨疋嚅觇 耱囹篑 黟彗\n"
+"syslog. 填驽 聱 溧 皴 桤镱腌忄 玎 耧桊囗 磬 爨磬蜞, 觐汔蝾 徉蝈痂蜞 "
+"桤蝾磬."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "填, 桤徨疱蝈 彗桕 玎 桤镱腌忄礤."
+msgid "Use tape to backup"
+msgstr "如镱腌忄 脲眚 玎 疱珏疴眍 觐镨"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "如徨疱蝈 戾龛滏 磬 镳铉铕鲨 玎 耱囵蜩疣礤:"
+msgid "The following packages are going to be installed"
+msgstr "央邃龛蝈 镟赍蜩  狷溧 桧耱嚯桊囗"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "如徨疱蝈 镱漯噻徼疣 皴 镱蝠遽栩咫 :"
+msgid "CUPS configuration"
+msgstr "CUPS 觐眙桡箴圉"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "锐赅蝈 腓 溧 桤镱腌忄蝈 蜞玷 铖钺屙铖?"
+msgid "Hong Kong"
+msgstr "疹磴 暑磴"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "爨 漕耱囹眍 耱 玎 聱玟噔囗 磬 眍 "
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "体耱屙"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"填汔 溧 磬耱痤 觐祜 忤 玎 怆桤囗 耔耱屐囹 噔蝾爨蜩黜 赅蝾 觐 "
-"镱蝠遽栩咫."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "棱蝾爨蜩黜 怆桤"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Icon"
-msgstr "汝铐"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"念狃 漕 镳 爨泓铖龛赅 玎 磬耱痤殛 磬 祓彐郳n"
+"\n"
+"妈 耱 磬 嵇 溧 磬耱痤栩 软蝈痦弪/祓彐钼囹 耔 怵赅.\n"
+"狸 礤 桉赅蝈 溧 桤镱腌忄蝈 噔蝾爨蜩黜 玎耔鬣礤, 桤觌弪 牦蜩殛囹.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Shell"
-msgstr "劐"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "相痤豚 (铗眍忸)"
+msgid "Lebanon"
+msgstr "髓忄"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Password"
-msgstr "相痤豚"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "User name"
-msgstr "项蝠遽栩咫耜 桁"
+msgid "Stop"
+msgstr "羊铒"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "玎皴麇磬 %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Real name"
-msgstr "锐蜩眈觐 桁"
+msgid "No CD device defined!"
+msgstr "湾 滂翳龛疣眍 CD 篑蝠铋耱忸!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Accept user"
-msgstr "橡桢扈 镱蝠遽栩咫"
+msgid "Bulgarian (phonetic)"
+msgstr "龙脬囵耜 (纛礤蜩麇)"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Done"
-msgstr "妙蝾忸"
+msgid "The DHCP start ip"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 柿"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "物鲨 磬 玎疱驿帙囹 镳钽疣爨"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"满忮溴蝈 镱蝠遽栩咫\n"
-"%s"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "念徉忤 镱蝠遽栩咫"
+msgid "Tape"
+msgstr "隋眚"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "翌忄 镱蝠遽栩咫耜 桁 忮麇 漕徉忮眍"
+msgid "Scanning network..."
+msgstr "羊囵蜩疣礤 祓彐囹...."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "翌忄 桁 蜮溴 潸脬"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgid "Malaysia"
+msgstr "锑豚殓"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swiss (French layout)"
+msgstr "剽彘鲟瘃赅 (麴屙耜 磬疱溽)"
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid 镳铒噤磬 (祛驽 徼 raidtools 腓锺忄 ?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
msgstr ""
-"项蝠遽栩咫耜铗 桁 祛驽 溧 怅膻麾 襦祛 爨腙 狍赈, 眍戾疣, `-' `_'"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "朽珈屦 磬 怛铕梓屙 赍 磬 cpu"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "填, 玎溧轵 镱蝠遽栩咫耜 桁"
+msgid "Soundcard"
+msgstr "氢箨钼 赅痱"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "亦玷 镟痤豚 镳尻嚯屙 镳铖蜞"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"青 溧 桤镥鬣蜞蝈 羿殡 铗 觐爨礓龛 疱 (蝈痨桧嚯屙 镳铉铕弼) 桤镱腌忄轵 "
+"觐爨礓囹 \"%s <file>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "填, 铒栩嚅蝈 铗眍忸"
+msgid "Level %s\n"
+msgstr "丸忸 %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "相痤腓蝈 礤 聱怙噤囹"
+msgid "Luxembourg"
+msgstr "塔犟屐狍疸"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(忮麇 镳栳噔桴 %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "漕耱 漕 桧耱痼戾眚 玎 觐祜桦圉"
+msgid "Iran"
+msgstr "瑞囗"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "漕耱 漕 祓彐钼 桧耱痼戾眚"
+msgid "Bus"
+msgstr "罔磬"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "漕耱 漕 羿殡钼 玎 噤扈龛耱痂疣礤"
+msgid "Iraq"
+msgstr "瑞嚓"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "镱玮铍忄 \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "满珈铈屙 觐眙桕 噤疱耔蝈 LAN 磬耱痤殛囹 磬 %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "漕耱 漕 rpm 桧耱痼戾眚"
+msgid "Configuring..."
+msgstr "袜耱痤殛 ..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "漕耱 漕 X 镳钽疣扈"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "玉蜞眍怅囹 忮麇 磬镳噔屙 祛戾眚 怅膻麇磬."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"翌忄 襦 疣珉梓龛蝈 玎镨耔.\n"
-"填驽蝈 溧 漕徉忤蝈 铢 桦 溧 镳铎屙栩 聱耱怏忄蝈."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "酿筱 窝 (Windows...)"
+msgid "Password (again)"
+msgstr "相痤豚 (铗眍忸)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "酿筱 窝 (MacOS...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "酿筱 窝 (SunOS...)"
+msgid "Venezuela"
+msgstr "洛礤鲶咫"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP 噤疱"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "枢犏 蜩 桧纛痨圉 桉赅蝈 溧 镳栳噔栩"
+msgid "Choose the sizes"
+msgstr "如徨疱蝈 泐脲扈龛蝈"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "翌玷 弪桕弪 忮麇 皴 桤镱腌忄"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "茵徕 溧 玎溧溴蝈 觐疱眍忤 "
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"锣 祛溴 礤 皴 镱滗驵 铗 耔耱屐囹.\n"
+"项汶邃礤蝈 http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "茵徕 溧 玎溧溴蝈 钺噻 磬 漯铗"
+msgid "Choose another partition"
+msgstr "如徨疱蝈 漯筱 "
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "橡噻屙 弪桕弪 礤 疣琊屮屙"
+msgid "Current user"
+msgstr "义牦 镱蝠遽栩咫"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "项 镱漯噻徼疣礤"
+msgid "Username"
+msgstr "项蝠遽栩咫耜 桁"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "铃 沭圄桕"
+msgid "Left \"Windows\" key"
+msgstr " \"Windows\" 觌噔桫"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-泐脲扈磬"
+msgid "dhcpd Server Configuration"
+msgstr "暑眙桡箴桊囗 磬 dhcpd 聱疴"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "念嵇脞囗"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "膨桕弪"
+msgid "Guyana"
+msgstr "描磬"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "物囫屙"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " 磬 Novell 聱疴 \"%s\", 镳桧蝈 \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "亦犭桷"
+msgid "Remove a module"
+msgstr "橡屐圊龛 祛潴豚"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Root"
-msgstr "秒噔屙"
+msgid "Password"
+msgstr "相痤豚"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-write"
-msgstr "族蝈礤-玎镨"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "念嵇腠栩咫磬 觐眙桡箴圉"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Video mode"
-msgstr "妈溴 疱骅"
+msgid "Scanning on your HP multi-function device"
+msgstr "殃囗桊 磬 忄蝾 HP 祉钽铘箜牿桀磬腠 篑蝠铋耱忸"
#: ../../any.pm:1
#, c-format
-msgid "Image"
-msgstr "吾疣"
+msgid "Root"
+msgstr "秒噔屙"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "窝 镱 镱漯噻徼疣礤 ?"
+msgid "Choose an existing RAID to add to"
+msgstr "如徨疱蝈 聱耱怏忄 RAID 玎 镳栳噔礤"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "羊囵蜩疣礤 铗 OF ?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "殷瘃赅 (祛溴疱 \"Q\" 祛溴)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "羊囵蜩疣礤 铗 CD ?"
+msgid "Lilo message not found"
+msgstr "Lilo 聱钺龛 礤 磬戾疱眍"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "如鬣赈囗 玎 耱囵蜩疣礤 磬 漯铗"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"棱蝾爨蜩黜 疱沐礤痂疣礤 磬 header-栩 磬 噤痤蝾, /boot 玎\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "如鬣赈囗 磬 Open Firmware"
+msgid "if needed"
+msgstr "嚓 眢骓"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot device"
-msgstr "羊囵蜩疣 篑蝠铋耱忸"
+msgid "Restore Failed..."
+msgstr "满珩蜞眍忄礤蝾 镳铒噤磬..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Init Message"
-msgstr "羊囵蝾忸 聱钺龛"
+msgid "/Autodetect _jazz drives"
+msgstr "/棱蝾爨蜩黜 铗牮桠 _jazz 篑蝠铋耱忄"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader to use"
-msgstr "如镱腌忄磬 玎疱驿帙囹 镳钽疣爨"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "物鲨 磬 玎疱驿帙囹 镳钽疣爨"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"满忮溴蝽桢\n"
+"\n"
+"物屦圉桀眄囹 耔耱屐 疣珉梓龛蝈 觐祜铐屙蜩 漕耱龛 Mandrake Linux "
+"滂耱痂狍鲨蜞 镱-漕塍  皴\n"
+"磬痂鬣 \"杨趄箦疱 橡钿箨蜩\". 杨趄箦痦栩 橡钿箨蜩 怅膻麾囹, 眍 礤 皴 "
+"钽疣龛鬣忄 襦祛 漕, 磬犷疣\n"
+"镳钽疣扈, 戾蝾滂, 镳噔桦 漕牦戾眚圉 铗磬 皴 漕 铒屦圉桀眄囹 "
+"耔耱屐 疣珉梓龛蝈\n"
+"觐祜铐屙蜩 磬 Mandrake Linux 滂耱痂狍鲨蜞.\n"
+"\n"
+"\n"
+"1. 髓鲥礴桀礤 漕泐忸餦n"
+"\n"
+"填, 镳铟弪弪 忭桁囹咫眍 蝾玷 漕牦戾眚. 翌玷 漕牦戾眚 腓鲥礴桀礤 "
+"漕泐忸 戾驿 忄 鑌n"
+"MandrakeSoft S.A., 觐轵 皴 铗磬 漕 杨趄箦痦 橡钿箨. 尊彗 "
+"桧耱嚯桊囗弪, 觐镨疣礤蝾\n"
+"桦 桤镱腌忄礤蝾 磬 杨趄箦痦 橡钿箨 镱 赅犏怛 溧 磬麒 忤 桤痂黜 "
+"镳桢爨蝈 鑌n"
+"磬嵇腠 皴 聱汶囫忄蝈 溧 耧噻忄蝈 耩铌钼弪 篑腩忤蜞 磬 蝾玷 髓鲥礴.\n"
+"狸 礤 皴 聱汶囫忄蝈 觐 鬣耱 磬 髓鲥礴, 爨蝈 镳噔 溧 桧耱嚯桊囹, "
+"觐镨疣蝈 桦鑌n"
+"桤镱腌忄蝈 杨趄箦痦 橡钿箨. 物栩栩 溧 皴 桧耱嚯桊, 觐镨疣 桦 桤镱腌忄 "
+"杨趄箦痦 橡钿箨騖n"
+"礤聱钺疣珥 聱 耩铌钼弪 篑腩忤蜞 磬 蝾玷 髓鲥礴 皴 玎狃囗忄 蜞觇忄 "
+"镳尻疣忄 镳噔囹郳n"
+"忤 镱 蝾玷 髓鲥礴. 橡 镳尻疣忄礤 磬 髓鲥礴, 蝠徕 礤玎徉忭 溧 "
+"箜桄蝾骅蝈 怦梓觇\n"
+"觐镨 磬 杨趄箦痦 腓鲥礴.\n"
+"\n"
+"\n"
+"2. 毋疣龛麇磬 汔疣眦\n"
+"\n"
+"杨趄箦痦栩 橡钿箨蜩 镳桦铈屙囹 漕牦戾眚圉 皴 镳邃铖蜞蜞 \"蜞觇忄 "
+"赅赈栩 襦\", 徨 汔疣眦,\n"
+" 疣礻栩 磬 疣琊屮屙铗 铗 玎觐磬.\n"
+"MandrakeSoft S.A., 镳 龛赅赈 钺耱蝈腭蜮 疣礻栩 磬 玎觐磬, 礤 "
+"铗泐忸痦 玎 赅赈栩 溧 e\n"
+"箪桫脲龛, 耠篦嚅龛, 镳尻 桦 觐耱忮龛 蜩 (怅膻麒蝈腠 玎泱徉 磬 溧眄 玎 "
+"疣犷蜞, 镳尻疣忄礤 磬,\n"
+"疣犷蜞, 翳磬眈钼 玎泱徼, 玎觐眄 溧睑鲨 磬赅玎龛 疱珞腧囹 磬 聱溴犴 "
+"疱龛 桦 赅赈囹 溧 錦n"
+"漯筱 镳铊珉桤帙 铗 蝾忄 玎泱徼) 镳铊珧梓帙 铗 箫铗疱徉蜞 桦 铗 "
+"礤恸珈铈眍耱蜞 溧 皴 箫铗疱徼\n"
+"杨趄箦痦 橡钿箨, 溧驽 嚓 MandrakeSoft S.A. 溧 桤忮耱桦 玎 "
+"恸珈铈眍耱蜞 桦 耠篦忄礤蝾 磬 蜞赅忄 玎泱徉.\n"
+"\n"
+"蚊欣腿着屠 我梦挛型窝 崖谛抢屠 闲纫牌缆劳乓 人 惹衔饲吕团椅 屠 抢列劳磐 "
+"盐砸优 瓦饰 岩欣腿\n"
+"\n"
+" 疣礻栩 磬 玎觐磬, MandrakeSoft S.A. 礤轫栩 滂耱痂狍蝾痂 爨 镳 "
+"龛赅赈 篑腩忤 溧 狷溧騖n"
+"铗泐忸痦 玎 赅赈栩 溧 徼腩 箪桫脲龛, 耠篦嚅龛, 镳尻 桦 觐疋屙 蜩 "
+"(怅膻麒蝈腠 玎泱徉 磬 溧眄鑌n"
+"玎 疣犷蜞, 镳尻疣忄礤 磬, 疣犷蜞, 翳磬眈钼 玎泱徼, 玎觐眄 溧睑鲨 "
+"磬赅玎龛 疱珞腧囹 磬\n"
+"聱溴犴 疱龛 桦 赅赈囹 溧 漯筱 镳铊珉桤帙 铗 蝾忄 玎泱徼) "
+"镳铊珧梓帙 铗 镳栩彐噔囗弪頫n"
+" 箫铗疱徉蜞 磬 耦趄箦痦 觐祜铐屙蜩 铗 桤蝈汶礤蝾 磬 耦趄箦痦 "
+"觐祜铐屙蜩 铗 襦轵钼弪 磬 Mandrake Linux,\n"
+"觐栩 襦 玎狃囗屙 觐 耱疣龛 铗 戾耱眍蝾 玎觐眍溧蝈腭蜮.\n"
+"亦玷 钽疣龛麇磬 铗泐忸痦铖 皴 铗磬 漕, 眍 礤 襦祛 玎, 祛栩 "
+"牮栾蝾沭圄耜 觐祜铐屙蜩 怅膻麇龛\n"
+" 杨趄箦痦 橡钿箨.\n"
+"\n"
+"\n"
+"3. GPL 髓鲥礴 镳桎痼驵忄 腓鲥礴鑌n"
+"\n"
+"杨趄箦痦 橡钿箨 皴 聱耱铊 铗 觐祜铐屙蜩 聱玟噤屙 铗 疣珉梓龛 躅疣 桦 "
+"铕汔龛玎鲨. 项忮麇蝾 铗\n"
+"蝈玷 觐祜铐屙蜩 皴 箫疣怆忄 铗 耩铌钼弪 篑腩忤蜞 磬 GNU 吾 象犭梓屙 "
+"髓鲥礴, 铗蝮 磬蜞蝥 磬痂鬣韁n"
+"\"GPL\", 桦 镱漕犴 礤祗 腓鲥礴. 项忮麇蝾 铗 蝈玷 腓鲥礴 忤 镱玮铍忄 溧 "
+"桤镱腌忄蝈, 觐镨疣蝈, 桦鑌n"
+"疱滂耱痂狍蜩疣蝈 觐祜铐屙蜩蝈, 觐栩 蝈 镱牮桠囹. 填, 镳铟弪弪 忭桁囹咫眍 "
+"耩铌钼弪 篑腩忤蜞 磬\n"
+"腓鲥礴桀眄 漕泐忸 磬 怦尻 觐祜铐屙 镳邃 溧 泐 桤镱腌忄蝈. 埋赅赈 "
+"恸镳铖 铗眍耥 腓鲥礴郳n"
+"磬 觐祜铐屙蜩蝈 徼 蝠徕嚯 溧 狷溧 磬耦麇龛 犏 聱铗忮蝽 桁 噔蝾, 礤 "
+"犏 MandrakeSoft.\n"
+"橡钽疣扈蝈 疣琊噌铗屙 铗 MandrakeSoft S.A. 皴 箫疣怆忄 铗 GPL 髓鲥礴. "
+"念牦戾眚圉蜞 磬镨襦磬\n"
+"铗 MandrakeSoft S.A. 皴 箫疣怆忄 铗 耧弼栲脲 腓鲥礴. 填, 镱汶邃礤蝈 "
+"漕牦戾眚圉蜞 玎\n"
+"镱忮麇 桧纛痨圉.\n"
+"\n"
+"\n"
+"4. 橡噔 玎 软蝈脲牝筻腠 杨狁蜮屙铖騖n"
+"\n"
+"埋梓觇 镳噔 犏 觐祜铐屙蜩蝈 磬 杨趄箦痦 橡钿箨 镳桧噤脲驵 磬 "
+"聱铗忮蝽栩 桁 噔蝾痂 襦\n"
+"玎蝈龛 铗 玎觐龛蝈 玎 桧蝈脲牝筻腠囹 耦狁蜮屙铖 玎 觐镨疣礤 镳桦嚆囗 "
+"玎 耦趄箦痦栩 镳钽疣扈.\n"
+"MandrakeSoft S.A. 玎镟玮 镳噔铗 耔 溧 祛滂翳鲨疣 镳桡钿忄 杨趄箦痦 "
+"橡钿箨, 赅蝾 腩 桦 磬\n"
+"鬣耱, 镱 怦赅犏 磬麒 怦赅赈 鲥腓.\n"
+"\"Mandrake\", \"Mandrake Linux\" 疋玎龛蝈 腩泐蜞 襦 玎镟珏磬 爨痍 磬 "
+"MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. 语疣怆忄 青觐龛\n"
+"\n"
+"狸 觐 鬣耱 铗 蝾玷 漕泐忸 皴 忸滂 玎狃囗屙, 礤脲汔腠 桦 礤镳桦铈桁 "
+"耧铕邃 疱龛 磬 聱,\n"
+"蜞玷 鬣耱 皴 桤觌忄 铗 漕泐忸疣. 妈 铖蜞忄蝈 钽疣龛麇龛 铗 铖蜞磬腓蝈 "
+"镳桦铈桁 皴牿梃 磬 漕泐忸疣.\n"
+"佯铌钼弪 篑腩忤蜞 磬 蝾玷 髓鲥礴 皴 箫疣怆忄 铗 青觐龛蝈 磬 责囗鲨.\n"
+"埋梓觇 耧铕钼 镱 篑腩忤蜞 磬 蝾玷 腓鲥 徼 徼腩 漕狃 溧 皴 铗礤襦 漕 "
+"聱溧. 枢蝾 牮嚅磬 痍,\n"
+"耧铕钼弪  狷溧 铗磬龛 漕 镱漉钿 镳噔龛 聱滂腓 磬 相痂 - "
+"责囗鲨.\n"
+"青 怦赅赈 恸镳铖 镱 蝾玷 漕牦戾眚, 祛, 疋驽蝈 皴 MandrakeSoft S.A.\n"
+"\n"
+"抢僚伺剖: 翌忄 狷脬囵耜 镳栳腓玷蝈脲 镳邂钿 磬 漕牦戾眚, 觐弪 "
+"铉磬鬣忄, 麇 蝾閈n"
+"忮痤蝽 礤 漕耱囹眍 蝾麇. 枢蝾 镱-漕耱钼屦屙 桤蝾黜桕 镱腌忄轵 "
+"礤泐忤 铕桡桧嚯 磬\n"
+"囗汶栝耜.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "物鲨蜞 ``毋疣龛麒 铒鲨栩 铗 觐爨礓龛 疱'' 徨顼铍彗磬 徨 镟痤豚"
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"脲眚囹 玎 镳钽疱 x 觐铕滂磬蜩\n"
+"铗 泐痦 "
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "泥忄 疣珈屦 RAM-镟戾 Mb"
+msgid "Current interface configuration"
+msgstr "暑眙桡箴圉 磬 蝈牦 桧蝈痿彘"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "玛膻麾 祉钽 镳铘桦"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - 髓礤屙 橡桧蝈疱 腻祛"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "翌麇 疣珈屦 磬 RAM-镟戾蝌, 嚓 礤钺躅滂祛 (磬戾疱龛 %d MB)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"狸 桁囹 ISA 赅痱, 耱铋眍耱栩 磬 耠邃忄 尻疣 蝠徕 溧 襦 忮痦.\n"
+"\n"
+"狸 桁囹 PCMCIA 赅痱,  蝠徕 溧 珥噱蝈 IRC IO 磬 赅痱囹 耔.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "项麒耱忄礤 磬 /tmp 镳 怦觐 玎疱驿囗"
+msgid "Do not print any test page"
+msgstr "湾 镥鬣蜩 龛赅赈 蝈耱钼 耱疣龛鲟"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "漾玟噔囗 磬 boot-滂耜弪"
+msgid "Gurmukhi"
+msgstr "皿痨箨麒"
#: ../../any.pm:1
#, c-format
-msgid "restrict"
-msgstr "钽疣龛麒"
+msgid "Force No APIC"
+msgstr "铃 APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "毋疣龛麒 铒鲨栩, 玎溧忄龛 铗 觐爨礓龛 疱"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "相痤豚蜞 镳尻嚯屙 镳铖蜞 (蝠徕 溧 狷溴 潸脬 镱礤 %d 耔焘铍)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "[keyboard]"
+msgstr "[觌噔栲蝮疣]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP proxy"
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "羊囵蜩疣礤 铗 CD ?"
+msgid "Install List"
+msgstr "软耱嚯桊囗 磬 耔耱屐囹"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "青徉礤 镳邃 耱囵蜩疣礤蝾 磬 镱漯噻徼疣 钺疣"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"橡铎磬\n"
+"嵇 磬 恸珩蜞眍忄礤"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "compact"
-msgstr "觐祜嚓蝈"
+msgid "Show only for the selected day"
+msgstr "项赅玮 襦祛 玎 桤狃囗 溴"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Compact"
-msgstr "暑祜嚓蝈"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "软耱嚯圉 磬 Bootloader"
+msgid "512 kB"
+msgstr "512 柿"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "销疴 皴牝铕 铗 耱囵蜩疣 皴 "
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "销疴 皴牝铕 铗 漯嚅忄 (MBR)"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "竖溴 桉赅蝈 溧 桧耱嚯桊囹 bootloader-?"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub 桧耱嚯圉"
+msgid "What kind of card do you have?"
+msgstr "枢犏 蜩 赅痱 桁囹 ?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO 桧耱嚯圉"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Skip"
-msgstr "橡羼赅鬣"
+msgid "Security"
+msgstr "谚泱痦铖"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "青镟玮 磬 滂耜弪"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "销疴 皴牝铕 铗 耱囵蜩疣 皴 "
+msgid "Unknown"
+msgstr "湾桤忮耱屙 祛溴"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "袜耱痤殛 磬 祓彐囹"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
+"橡铗铌铍 玎 铖蜞磬腓 疋騖n"
+" 徨 D-枢磬 (磬弪 腓龛)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "漾玟噔囗 磬 耱囵蜩疣 滂耜弪..."
+msgid "Option %s must be a number!"
+msgstr "袜耱痤殛囹 %s 蝠徕 溧 麒耠 !"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "央铈弪 滂耜弪 篑蝠铋耱忸 %s"
+msgid "Notice"
+msgstr "铃脲骊"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "如徨疱蝈 綦铒 篑蝠铋耱忸, 犏溴蝾 溧 磬镳噔栩 耱囵蜩疣 滂耜弪"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" 狸蜩忤疣/青狃囗忄 彐邃礤忭 镳钼屦赅 玎 玎蜞"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "买铕 綦铒 篑蝠铋耱忸"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "销疴 綦铒 篑蝠铋耱忸"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "妈 礤 耱 觐眙桡箴桊嚯 X. 谚泱痦 腓 耱, 麇 桉赅蝈 蝾忄?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "漾驵忄 爨 綦铒"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"暑眙桡箴圉蜞 磬 镳桧蝈疣  疣犷蜩 磬腠 噔蝾爨蜩黜. 狸 忄 镳桧蝈 "
+"礤 徼 觐疱牝眍 铗牮栩 桦 忤 镳邃镱麒蜞蝈 磬 磬耱痤栩 镳桧蝈疣, "
+"怅膻麇蝈 磬 \"喧黜 觐眙桡箴圉\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "枢犏 蜩 疣玟咫礤 磬 腩忮 ?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"孰桢眚耜 bootdisk 礤钺躅滂 玎 耱囵蜩疣礤 Linux 耔耱屐囹 忤 "
-"礤玎忤耔祛\n"
-"铗 钺桕眍忮磬蜞 玎疱驿帙 镳钽疣爨. 翌忄 镱脲珥, 嚓 礤 桉赅蝈 溧 "
-"桧耱嚯桊囹錦n"
-"LILO (桦 GRUB) 磬 耔耱屐囹 耔 桦 嚓 觐 漯筱 铒屦圉桀眄 耔耱屐 "
-"爨蹴 LILO 桦 LILO 礤\n"
-"疣犷蜩 踵痄箦痦囹 忤 磬耱痤殛. Bootdisk- 祛驽 溧 狷溴 桤镱腌忄 聱馶n"
-"耧囫栩咫磬蜞 滂耜弪 磬 Mandrake, 箅羼忄 恸珩蜞眍忄礤蝾 镳 疱潢鑌n"
-"耠篦噼 磬 耩桠. 锐赅蝈 腓 溧 聱玟囔 bootdisk 玎 耔耱屐囹 忤 ?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "软蝈痿彘"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
+" - Backup User Files: \n"
"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-"(闲拍酉信颇磐扰! 妈 桤镱腌忄蝈 XFS 玎 忄蜞 觐疱眍忄 羿殡钼 耔耱屐,\n"
-"聱玟噔囗弪 磬 bootdisk 恸瘐 1.44 提 綦铒 爨 溧 篑镥,\n"
-"镱礤驽 XFS 皴 眢驿噱 铗 祉钽 镱忮麇 耱)."
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"孰桢眚耜 bootdisk 礤钺躅滂 玎 耱囵蜩疣礤 Linux 耔耱屐囹 忤 "
-"礤玎忤耔祛\n"
-"铗 钺桕眍忮龛 bootloader. 翌忄 镱脲珥, 嚓 礤 桉赅蝈 溧 桧耱嚯桊囹錦n"
-"SILO 磬 耔耱屐囹 耔, 嚓 觐 漯筱 铒屦圉桀眄 耔耱屐 爨蹴 SILO\n"
-"桦 嚓 SILO 礤 疣犷蜩 踵痄箦痦囹 忤 磬耱痤殛. 孰桢眚耜 bootdisk\n"
-"祛驽 溧 狷溴 桤镱腌忄 聱馶n"
-"耧囫栩咫龛 钺疣 磬 Mandrake, 箅羼忄觇 恸珩蜞眍忄礤蝾 镳 疱潢鑌n"
-"耠篦噼 磬 耩桠.\n"
-"\n"
-"狸 桉赅蝈 溧 聱玟噤弪 bootdisk 玎 忄蜞 耔耱屐, 镱耱噔弪 滂耜弪 鈂n"
-"嵇疴铗 篑蝠铋耱忸 磬蜩耥弪 \"Ok\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "湾 祛驽蝈 溧 桧耱嚯桊囹 bootloader 磬 豚 %s\n"
+msgid "comma separated strings"
+msgstr "龛珙忮 疣玟咫屙 聱 玎镥蜞"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "爨 漕耱囹眍 耱 玎 /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "项漶忮蝽囹 玎镨  玎疱滂 噔蝾爨蜩黜 耠邃 %d 皴牦礓."
+msgid "Messages"
+msgstr "漾钺龛"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "觐爨礓栩 镳邃 耱囵蜩疣礤, 桦 'c' 玎 觐爨礓屙 疱."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "湾桤忮耱屙|CPH06X (bt878) [祉钽 镳铊玮钿栩咫鑍"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "袜蜩耥弪 'enter' 玎 溧 耱囵蜩疣蝈 桤狃囗囹 窝, 'e' 溧 疱溧牝桊囹"
+msgid "POP and IMAP Server"
+msgstr "POP IMAP 聱疴"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"如镱腌忄 觌噔桫栩 %c %c 玎 桤犷 磬 蝾忄 觐 玎镨 溧 狷溴 镱漶忮蝽囹."
+msgid "Mexico"
+msgstr "体犟桕"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "念狃 漕 GRUB ,玎 桤犷 磬 铒屦圉桀眄囹 耔耱屐!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "灶痨囹桊囗"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "畜囗溧"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "褥囹 腓 赅犏 %s 桧蝈痿彘?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO 蝈犟蝾忸 戾睨"
+msgid "Switzerland"
+msgstr "剽彘鲟痂"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO 沭圄梓眍 戾睨"
+msgid "Brunei Darussalam"
+msgstr "琉箜彘"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "物鲨 磬 铗溧脲麇 lpd-镳桧蝈"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"念狃 漕 %s - 桤徼疣礤 磬 铒屦圉桀眄 耔耱屐!\n"
+"GNU/Linux 祉钽铒铗疱徼蝈腭赅 耔耱屐, 觐蝾 铉磬鬣忄, 麇 怦尻 镱蝠遽栩咫 "
+"祛驽\n"
+"溧 桁 疋铊 镳邃镱麇蜞龛, 羿殡钼 ... 祛驽蝈 溧 镳铟弪弪 喧觐忸耱忸蝾 "
+"磬\n"
+"项蝠遽栩咫, 玎 溧 磬篦栩 镱忮麇.\n"
+"青 疣珉桕 铗 Root, 觐轵 噤扈龛耱疣蝾瘊, 镱蝠遽栩咫栩, 觐栩  "
+"漕徉忤蝈 蝮闬n"
+"爨 溧 祛汔 溧 镳铎屙 龛 铖忮 耦狁蜮屙栩 耔 羿殡钼 蝈蹴栩 "
+"磬耱痤殛.\n"
+"馘 蝠徕 溧 聱玟噤弪 镱礤 邃桧 钺桕眍忮 镱蝠遽栩咫 玎 皴徨 耔.\n"
+" 蝾玷 嚓囿眚  蝠徕 溧 怆桤囹 玎 痼蜩眄 溴轫铖. 满镳尻 蝾忄 "
+"镳嚓蜩赅蜞\n"
+"溧 怆桤囹 赅蝾 root 彐邃礤忭, 祛驽 溧 狷溴 祉钽 铒囫磬 ! 磬-"
+"爨腙囹嚆疱郳n"
+"祛驽 溧 铉磬鬣忄, 麇 耔耱屐囹 忤 爨 溧 疣犷蜩 镱忮麇. 狸 磬镳噔栩 觐 "
+"皴痂铉磬\n"
+"沭屮赅 赅蝾 镱蝠遽栩咫, 蝾忄 祛驽 襦 溧 漕忮溴 漕 玎泱徉 磬 鬣耱 铗 "
+"桧纛痨圉蜞,\n"
+"眍 礤 磬 豚蜞 耔耱屐.\n"
"\n"
-"如徨疱蝈 铒屦圉桀眄囹 耔耱屐 铗 泐痦 耧桉 桦 桤鬣赅轵錦n"
-"%d 皴牦礓 玎 镱漯噻徼疣 耱囵蜩疣礤.\n"
+"销疴, 蝠徕 溧 耔 恸忮溴蝈 桁弪. 翌忄 礤 玎潸腈栩咫眍, 疣玑桊 皴, "
+"怦眍耱\n"
+"祛驽蝈 溧 恸忮溴蝈 赅赈铗 溧 . DrakX 耠邃 蝾忄  桤徨疱 嵇疴囹 "
+"恸忮溴磬\n"
+" 牦蜩殛囹 潴爨  泐 桤赅疣 赅蝾 镱蝠遽栩咫耜 桁. 翌忄 桁弪, "
+"觐弪頫n"
+"怦眍耱 铒疱溴脲龛 镱蝠遽栩咫  怆桤 耔耱屐囹. 填驽蝈 溧 泐 "
+"镳铎屙栩.\n"
+"茵徕 溧 恸忮溴蝈 镟痤豚 蝮. 相痤豚蜞 磬 礤镳邂桦邈桊钼囗 (钺桕眍忮) "
+"镱蝠遽栩咫\n"
+"礤 蝾腙钼 羿蜞腠 赅蝾 蜞玷 磬 Root 铗 汶邃磬 蝾麝 磬 耔泱痦铖蝌, 眍 "
+"怦錦n"
+"镟 爨 镳梓桧 溧 镱漩屙忄蜞, 蝥 赅蝾 痂耜筲囹 羿殡钼弪 耔.\n"
"\n"
+"央邃 赅蝾 鳅觏弪 磬 \"橡桢扈 镱蝠遽栩咫\", 祛驽蝈 溧 漕徉忤蝈 觐腙铗 耔 "
+"桉赅蝈.\n"
+"念徉忮蝈 镱 邃桧 镱蝠遽栩咫 玎 怦尻 铗 镳蝈腓蝈 耔: 徉 耔, 皴耱疣 耔, "
+"磬镳桁屦.\n"
+"暑汔蝾 耱 漕徉忤腓 怦梓觇 镱蝠遽栩咫, 觐栩 桉赅蝈, 鳅觏弪 妙蝾忸.\n"
+"\n"
+"助觏弪 磬 狍蝾磬 \"袜镳邃龛鬣鈂", 玎 溧 镳铎屙栩 钺忤怅囹 镱 镱漯噻徼疣礤 "
+"磬\n"
+"镱蝠遽栩咫 (bash 镱 镱漯噻徼疣礤)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "腓锺忄 镱祛 磬 觐礴铍"
+msgid "Configure Internet Access..."
+msgstr "袜耱痤殛 磬 软蝈痦弪 漕耱 ..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "腓锺忄 kdesu"
+msgid "Norway"
+msgstr "皖疴邈"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "秧桁觇  狷溧 磬腓黜 耠邃 桧耱嚯桊囗 %s"
+msgid "Danish"
+msgstr "泥蝰赅"
-#: ../../common.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"棱蝾爨蜩黜 怅膻麾囗 磬 numlock 觌噔桫 镱 觐礴铍 鑌n"
+"XFree 镳 耱囵蜩蜞礤."
+
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"填, 恸忮溴蝈 IP 磬耱痤殛栩 玎 蜞玷 爨磬.\n"
+"埋觐 篑蝠铋耱忸 蝠徕 溧 狷溴 恸忮溴眍 赅蝾 IP 噤疱馶n"
+" 蝾麝钼-溴皴蜩黜 铉磬麇龛 (磬镳桁屦, 1.2.3.4)."
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "湾 祛汔 溧 漕徉 镱忮麇 腩忮"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"软耱嚯圉蜞 磬 Mandrake Linux 疣顼铍铈屙 磬 觐腙 CDROM-. DrakX\n"
+"珥噱 溧腓 桤狃囗 镟赍 礤 皴 磬扈疣 磬 漯筱 CDROM 桦  桤忄滂 蝈牦蝾\n"
+"CD  忤 铖蜞忤 溧 怅囵囹 蝾忄, 铗 觐弪 桁 眢驿."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d 皴牦礓"
+msgid "Processors"
+msgstr "橡铞羼铕"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 扈眢蜞"
+msgid "Bulgaria"
+msgstr "龙脬囵"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%d minutes"
-msgstr "%d 扈眢蜩"
+msgid "No NIC selected!"
+msgstr "爨 NIC 桤狃囗!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "伊"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "砚嚯徉痄 唔 锑殄 务蝠钼"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "GB"
-msgstr "昧"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"项忤 皴 镳钺脲 镳 觐眙桡箴圉蜞.\n"
+"橡钼屦弪 忄蜞 怵赅 镳彗 net_monitor 桦 mcc. 狸 忄蜞 怵赅 礤 "
+"疣犷蜩 , 忤 蝠徕 溧 镳尻铐翳泱痂疣蝈."
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "MB"
-msgstr "塘"
+msgid "partition %s is now known as %s"
+msgstr " %s 皴汔 桤忮耱屙 赅蝾 %s"
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "KB"
-msgstr "柿"
+msgid "Backup Other files..."
+msgstr "绣珏疴眍 觐镨 磬 漯筱 羿殡钼..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United States"
-msgstr "牙"
+msgid "SMB server IP"
+msgstr "IP 磬 SMB 聱疴:"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Austria"
-msgstr "棱耱痂"
+msgid "Congo (Kinshasa)"
+msgstr "暑磴 (疏眸囫)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italy"
-msgstr "闰嚯"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "亦犭桷囹 磬 腩忮蝈 磬 篑蝠铋耱忸 %s  狷溴 玎镨襦磬 恸瘐 滂耜 !"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "疹豚礓"
+msgid "Installing HPOJ package..."
+msgstr "软耱嚯桊囗 磬 HPOJ 镟赍蜩 ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sweden"
-msgstr "剽弼"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"孰桢眚耜 bootdisk 礤钺躅滂 玎 耱囵蜩疣礤 Linux 耔耱屐囹 忤 "
+"礤玎忤耔祛\n"
+"铗 钺桕眍忮磬蜞 玎疱驿帙 镳钽疣爨. 翌忄 镱脲珥, 嚓 礤 桉赅蝈 溧 "
+"桧耱嚯桊囹錦n"
+"LILO (桦 GRUB) 磬 耔耱屐囹 耔 桦 嚓 觐 漯筱 铒屦圉桀眄 耔耱屐 "
+"爨蹴 LILO 桦 LILO 礤\n"
+"疣犷蜩 踵痄箦痦囹 忤 磬耱痤殛. Bootdisk- 祛驽 溧 狷溴 桤镱腌忄 聱馶n"
+"耧囫栩咫磬蜞 滂耜弪 磬 Mandrake, 箅羼忄 恸珩蜞眍忄礤蝾 镳 疱潢鑌n"
+"耠篦噼 磬 耩桠. 锐赅蝈 腓 溧 聱玟囔 bootdisk 玎 耔耱屐囹 忤 ?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "皖疴邈"
+msgid ", USB printer \\#%s"
+msgstr ", USB 镳桧蝈 \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Greece"
-msgstr "铭瘀"
+msgid "Latvian"
+msgstr "肃蜮栝耜"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Germany"
-msgstr "缅痨囗"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech Republic"
-msgstr "族 绣矬犭桕"
+msgid "Module name"
+msgstr "褥 磬 祛潴"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Belgium"
-msgstr "铃脬"
+msgid "Start at boot"
+msgstr "如嵇腠屙桢 镳 耱囵蜩疣礤"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France"
-msgstr "责囗鲨"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "暑耱 需赅"
+msgid "First sector of drive (MBR)"
+msgstr "销疴 皴牝铕 铗 漯嚅忄 (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "灭屮赅 镳 铗忄礤 磬 %s 玎 玎镨: %s"
+msgid "Joystick"
+msgstr "逆铋耱桕"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "爨 龛 玎 镳噔屙"
+msgid "El Salvador"
+msgstr "烹 燕脞噤铕"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "爨 漕耱囹眍 耱 玎 噔蝾爨蜩黜 疣顼疱溴礤"
+msgid "Use Unicode by default"
+msgstr "如镱腌忄 箜桕钿 镱 镱漯噻徼疣礤"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-"妈 礤 祛驽 溧 桤镱腌忄蝈 牮栾蜩疣磬 羿殡钼 耔耱屐 玎 蝾麝 磬 祛眚桊囗 %s"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "物栩忄 皴 溧 耧囫 蜞犭桷囹 磬 腩忮蝈"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "袜耱痤殛囹 %s 蝠徕 溧 腩 麒耠 !"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"腕驿噱蝈 皴 铗 桉蜩眈赅 羿殡钼 耔耱屐 (ext2, reiserfs,xfs, 桦 jfs) 玎 "
-"蜞玷 蝾麝 磬 祛眚桊囗錦n"
+"青镨耔蝈 觐栩 忤  蝠徕 溧 玎嵇腠栩:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "亦玷 滂疱牝铕 蝠徕 溧 铖蜞礤 疣礻栩 磬 root 羿殡钼囹 耔耱屐."
+msgid "Unable to start live upgrade !!!\n"
+msgstr "湾 祛汔 溧 矬耥 钺眍忄礤蝾 !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "湾 祛驽蝈 溧 桤镱腌忄蝈 LVM 蜩 玎 耱 磬 祛眚桊囗 %s"
+msgid "Name: "
+msgstr "褥: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"锑痍桊嚯 耱 耦趄箦疱 RAID 赅蝾 root (/).\n"
-"爨 玎疱驿帙 镳钽疣爨, 觐蝾 溧 祛驽 溧 皴 耧疣忤 礤泐 徨 /boot .\n"
-"亦赅 麇 漕徉忮蝈 /boot "
+msgid "16 million colors (24 bits)"
+msgstr "16 扈腓铐 鲡蜞 (24 徼蜞)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "洛麇 桁 祛眚桊囗 磬 蝾忄 耱 %s\n"
+msgid "Allow all users"
+msgstr "项玮铍忄 磬 镱蝠遽栩咫"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "褥弪 磬 镳桧蝈疣 蝠徕 溧 聱潸疰 襦祛 狍赈, 麒耠 镱澉屦蜞怅"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "昔桷栲腠 桤蝾黜桕 磬 MandrakeSoft "
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "翌麝栩 磬 祛眚桊囗 蝠徕 溧 玎镱麾囹 /"
+msgid "Resizing"
+msgstr "橡铎磬 磬 泐脲扈磬蜞"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "湾 祛驽蝈 溧 桧耱嚯桊囗 ReiserFS 磬 镱-爨膪 铗 32 塘"
+msgid "Cable connection"
+msgstr "枢徨腠 怵赅"
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "湾 祛驽蝈 溧 桤镱腌忄蝈 JFS 玎 镱-爨膪 铗 16 塘"
+msgid "User"
+msgstr "项蝠遽栩咫"
#: ../../fsedit.pm:1
#, c-format
@@ -1031,981 +1706,266 @@ msgstr ""
"\n"
"漾汶囫龛 腓 耱 溧 玎泱徼蝈 怦梓觇 腩忮?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "灭屮赅"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "聱疴"
+msgid "Printer on parallel port \\#%s"
+msgstr "橡桁屦 磬 镟疣脲脲 镱痱 \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr " /usr"
+msgid "Name"
+msgstr "褥"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "镳铖"
+msgid "mkraid failed"
+msgstr "mkraid 镳铒噤磬"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "朽琊屮噔 swap %s"
+msgid "Button 3 Emulation"
+msgstr "褥栩圉 磬 3 狍蝾磬"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "沭屮赅 镳 溴祛眚桊囗 磬 %s: %s"
+msgid "Sending files..."
+msgstr "如镳帙囔 羿殡钼..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "祛眚桊囗弪 磬 %s 滂疱牝铕 %s 镳铒噤磬"
+msgid "Israeli (Phonetic)"
+msgstr "如疣咫耜 (纛礤蜩黜)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "灶痨囹桊 %s"
+msgid "access to rpm tools"
+msgstr "漕耱 漕 rpm 桧耱痼戾眚"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "橡钼屦赅 磬 %s"
+msgid "edit"
+msgstr "疱溧牝桊"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "灶痨囹桊囗 磬 %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "茵徕 溧 恸忮溴蝈/桤徨疱蝈 镳桧蝈/篑蝠铋耱忸!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "漾玟噔囗 纛痨囹桊囗 磬 羿殡 %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "礤 珥囔 赅 溧 纛痨囹桊囔 %s 蜩 %s"
+msgid "Phone number"
+msgstr "义脲纛礤 眍戾"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s 纛痨囹桊囗 铗 %s 镳钼嚯屙"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "灭屮赅: \"%s\" 漯嚅忮 玎 忄蜞 赅痱 桧耱嚯桊囗"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"助觏弪 \"OK\", 嚓 桉赅蝈 溧 桤蝠桢蝈 怦梓觇 溧眄 鑌n"
-"腩忮 聱耱怏忄 磬 蝾玷 蜮 滂耜. 马桁囗桢, 耠邃 鳅赅礤 磬 \"OK\", "
-"爨溧 祛驽蝈 溧 恸珩蜞眍忤蝈 赅赈栩 溧 徼腩 溧眄 腩忮 聱耱怏忄 "
-"磬 蝾玷 蜮 滂耜,\n"
-"怅膻麒蝈腠 赅赈栩 溧 Windows 溧眄.\n"
-"\n"
-"助觏弪 \"悟磬\", 玎 溧 铗戾龛蝈 蜞玷 铒屦圉 徨 玎泱徉 溧 溧眄栩 鑌n"
-"腩忮蝈 聱耱怏忄 磬 蝾玷 蜮 滂耜."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer name, description, location"
+msgstr "褥 磬 镳桧蝈疣, 铒桉囗桢, 戾耱铒铍铈屙桢"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "USA (broadcast)"
msgstr ""
-"如徨疱蝈 蜮滂 滂耜, 觐轵 桉赅蝈 溧 桤蝠弪, 玎 溧\n"
-"桧耱嚯桊囔 眍忤 忤 Mandrake Linux . 马桁囗桢, 怦梓觇 溧眄 磬 礤泐  "
-"狷溧 玎泱徨龛\n"
-" 爨 溧 祛汔 溧 皴 恸珩蜞眍."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
+"填, 桤徨疱蝈\n"
+"眍耔蝈 玎 疱珏疴眍 觐镨."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "如镱腌忄 疣瑛桊屙桢蝾 Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"湾祛驽 溧 皴 玎蜮铕 镳噔桦眍 mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
+msgid "West Europe"
+msgstr "青镟漤 赔痤镟"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 忮瘃 %s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (桦 LInux LOader) Grub 襦 bootloader-: 蝈 祛汔 溧 耱囵蜩疣騖n"
-"GNU/Linux 桦 觐 溧 漯筱 铒屦圉桀眄 耔耱屐 聱耱怏忄 磬 觐祜 "
-"忤.\n"
-"吾桕眍忮眄, 蝈玷 漯筱 铒屦圉桀眄 耔耱屐 皴 玎耔鬣 桧耱嚯桊囹\n"
-"镳噔桦眍. 狸 蝾忄 礤 耱噔 镳 忄, 祛驽蝈 溧 漕徉蝈 玎镨耔 磬 瘊赅 鈂n"
-"蝾玷 尻疣. 秒邃嚅蝈 溧 桤徨疱蝈 忮痦 镟疣戾蝠.\n"
-"\n"
-"\n"
-"填驽 溧 礤 桉赅蝈 溧 溧忄蝈 漕耱 漕 蝈玷 铒屦圉桀眄 耔耱屐 磬 龛觐,\n"
-" 觐轵 耠篦嚅 祛驽蝈 溧 桤蝠桢蝈 聱铗忮蝽栩 玎镨耔. 皖 蜞犏 耠篦嚅,\n"
-" 皴 眢驿噱蝈 铗 boot-滂耜弪, 玎 溧 汨 耱囵蜩疣蝈 !"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "暑镨疣礤 磬 %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "如徨痤 磬 鲡"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "念扈龛赅眈赅 绣矬犭桕"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"填, 桤徨疱蝈 忮痦 镱痱. 袜镳桁屦, 镱痱 COM1 镱 Windows 镱 GNU/Linux\n"
-"皴 磬痂鬣 ttyS0."
+msgid "Swaziland"
+msgstr "砚噻桦屙"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"项 镱漯噻徼疣礤, DrakX 镳邃镱豚汔 麇 桁囹 溻筢篁铐磬 扈  怅膻麒\n"
-"耔祗腓疣礤 磬 蝠 狍蝾磬. DrakX 噔蝾爨蜩黜 疣玑桊 溧腓 PS/2, 皴痂轫 "
-"桦鑌n"
-"USB 扈.\n"
-"\n"
-"狸 桉赅蝈 溧 铒疱溴腓蝈 漯筱 蜩 磬 扈囹, 桤徨疱蝈 镱漉钿 铗 耧桉,\n"
-"觐轵  忤 狷溴 镳邃耱噔屙.\n"
-"\n"
-"狸 桤徨疱蝈 扈 疣珉梓磬 铗 蜞玷 镱 镱漯噻徼疣礤,  忤 狷溴 镳邃铖蜞忮韁n"
-"尻疣 玎 镳钺. 如镱腌忄轵 狍蝾龛蝈 觐脲膂弪, 玎 溧 镳钼屦栩, 麇\n"
-"磬耱痤殛囹 漕疣. 狸 扈囹 礤 疣犷蜩, 赅牝 蝠徕, 磬蜩耥弪 桧蝈疴嚯\n"
-"桦 雅 纶型乓 犏 \"悟赅鏫" 桤徨疱蝈 镟."
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr "青溧忄-UID"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"填, 鳅觏弪 磬 镳邃镱麒蜞龛 彗桕 磬 桧耱嚯圉 耔耱屐磬 箫铗疱徉.\n"
-"\n"
-"助赅礤蝾 磬 狍蝾磬 \"袜镳邃龛鬣鈂"  忤 镱玮铍 溧 桤徨疱蝈 漯筱 彗桷鑌n"
-"溧 狷溧 桧耱嚯桊囗 磬 疣犷蝽囹 忤 耱囗鲨. 如徼疣礤蝾 磬 漯筱 彗桷鑌n"
-" 桧耱嚯桊 羿殡钼 耧弼桠梓龛 玎 彗桷栩 玎 耔耱屐磬 漕牦戾眚圉 鑌n"
-"镳桦铈屙. 袜镳桁屦, 嚓 桁囹 镱蝠遽栩咫 铗 如镟龛 磬 爨磬蜞 耔,\n"
-"桤徨疱蝈 囗汶栝耜 赅蝾 汶噔屙 彗桕 潸疴钼桎磬蜞 纛痨 皴牿\n"
-"\"袜镳邃龛鬣鈂" 鳅觏弪 磬 耔忄蜞 玮彗溧 聱铗忮蝰蜮帙 磬\n"
-"\"锐镟眈觇|锐镟龛\".\n"
-"悟徨脲驽蝈, 麇 祛汔 溧 狷溧 桧耱嚯桊囗 觐腙 彗桕. 洛漤 桤狃囗\n"
-"赅犏 腩赅, 鳅觏弪 狍蝾磬 \"OK\", 玎 溧 镳钿骅蝈."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "填, 镳钼屦弪 溧腓 桤镱腌忄蝈 CDRW 戾滂"
#: ../../help.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"吾桕眍忮眍, DrakX 徼 蝠徕嚯 溧 桤徨疱 镳噔桦磬蜞 玎 忄 觌噔栲蝮疣 ( "
-"玎忤耔祛耱\n"
-"铗 彗桕, 觐轵 耱 桤狃嚯) 爨 溧 皴 磬腩骅 溧 忤滂蝈 蜞玷 耱赅. "
-"吾圜 祛驽 溧\n"
-"爨蝈 觌噔栲蝮疣 聱铗忮蝰蜮帙 蝾黜 磬 忄 彗桕: 磬镳桁屦, 嚓 耱 "
-"囗汶钽钼铕 邃,\n"
-"祛驽 徼  桉赅蝈 觌噔栲蝮疣蜞 忤 溧 狷溴 邃耜. 入 嚓 泐忸痂蝈 "
-"a磴腓轳觇, 眍 耱錦n"
-" 殊遽尻, 祛驽 徼  耱 聱蜞 耔蝮圉. 溻囹 耠篦,  蝠徕 溧 "
-"皴 恸痦弪錦n"
-"犏 蜞玷 桧耱嚯圉桀眄 耱赅 溧 桤徨疱蝈 镳噔桦磬蜞 觌噔栲蝮疣 铗 "
-"耧桉.\n"
-"\n"
-"埋梓觐, 觐弪 蝠徕 溧 磬镳噔栩, 溧 镱耦麒蝈 镳邃镱麒蜞磬蜞 觌噔栲蝮痦 "
-"磬疱溽郳n"
-"铗 耧桉, 觐轵  皴 镱忤 镳邃 忄.\n"
-"\n"
-"狸 桁囹 觌噔栲蝮疣 铗 彗桕 疣珉梓屙 铗 蝾玷 桤镱腌忄 镱 镱漯噻徼疣礤, "
-"鳅觏弪錦n"
-"磬 狍蝾磬 \"袜镳邃龛鬣鈂". 馘 忤 狷溴 镳邃铖蜞忮 嵇脲 耧桉 "
-"镱滗驵龛蝈 觌噔栲蝮痂."
+"如徨疱蝈 蜮滂 滂耜, 觐轵 桉赅蝈 溧 桤蝠桢蝈, 玎 溧\n"
+"桧耱嚯桊囔 眍忤 忤 Mandrake Linux . 马桁囗桢, 怦梓觇 溧眄 磬 礤泐  "
+"狷溧 玎泱徨龛\n"
+" 爨 溧 祛汔 溧 皴 恸珩蜞眍."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid " on parallel port \\#%s"
+msgstr " 磬 镟疣脲脲 镱痱 \\#%s"
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr ""
+"如镱腌忄 觌噔桫栩 %c %c 玎 桤犷 磬 蝾忄 觐 玎镨 溧 狷溴 镱漶忮蝽囹."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"铃 玎皴麇 镱忮麇 铗 邃桧 Microsoft Windows 隲n"
-"磬 蜮滂 忤 滂耜. 如徨疱蝈 蝾玷, 麒蝾 潸腈桧 桉赅蝈 溧 镳铎屙栩, 玎 "
-"溧\n"
-"桧耱嚯桊囹 Mandrake Linux 铒屦圉桀眄 耔耱屐.\n"
-"\n"
-"\n"
-"青 桧纛痨圉, 怦尻 桤狃铄 赅牝 耠邃忄: \"Linux 桁錦", \"Windows 桁"
-"\", \"枢镟鲨蝈騖".\n"
-"\n"
-"\"Linux 桁弪頫" 皴 觐滂疣 赅牝 耠邃忄: \"蜩 磬 滂耜郳", \"眍戾 磬 滂耜"
-"\",\n"
-"\"眍戾 磬 隲" (磬镳桁屦, \"hda1\").\n"
-"\n"
-"\n"
-"\"诣嵇 磬 滂耜郳" 祛驽 溧 \"hd\", 嚓 IDE 蜮 滂耜, 桦 \"sd\", 嚓 "
-"錦n"
-"SCSI 蜮 滂耜.\n"
-"\n"
-"\n"
-"\"皖戾瘊 磬 滂耜郳" 忤磬汨 狍赈囹 耠邃 \"hd\" 桦 \"sd\". 橡 IDE "
-"滂耜钼:\n"
-"\n"
-" * \"a\" 铉磬鬣忄 \"master 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
-" * \"b\" 铉磬鬣忄 \"slave 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
-" * \"c\" 铉磬鬣忄 \"master 滂耜 磬 怛铕 IDE 觐眚痤脲餦",\n"
-" * \"d\" 铉磬鬣忄 \"slave 滂耜 磬 怛铕 IDE 觐眚痤脲餦".\n"
-"\n"
-"\n"
-"橡 SCSI 篑蝠铋耱忄, \"a\" 铉磬鬣忄 \"嵇疴 蜮 滂耜\", \"b\" 铉磬鬣忄 "
-"\"怛铕 蜮 滂耜\" ...\n"
-"\n"
-"\"Windows 桁弪頫" 狍赈囹 磬 蜮滂 忤 滂耜 镱 Windows (嵇疴 滂耜 "
-"桦鑌n"
-" 皴 磬痂鬣 \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "吾桕眍忮眄 2-狍蝾眄 扈"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-" 蝾玷 祛戾眚 蝠徕 溧 桤徨疱蝈 觐 腩忮 溧 狷溧 桤镱腌忄龛 玎 "
-"桧耱嚯圉\n"
-"磬 忄蜞 Mandrake Linux 耔耱屐. 狸 腩忮蝈 忮麇 襦 铒疱溴脲龛, 溧腓 铗\n"
-"镳邃桫磬 桧耱嚯圉 磬 GNU/Linux 桦 铗 漯筱 桧耱痼戾眚 玎 疣玟咫礤, "
-"祛驽蝈\n"
-"溧 桤镱腌忄蝈 聱耱怏忄蝈 溧腩忮. 镳铗桠屙 耠篦嚅 蝠徕 溧 铒疱溴腓蝈\n"
-"腩忮 铗 蜮滂 滂耜.\n"
-"\n"
-"青 溧 聱玟噤弪 腩忮, 蝠徕 嵇疴 溧 桤徨疱蝈 蜮 滂耜. 填驽蝈 溧\n"
-"桤徨疱蝈 滂耜 玎 疣玟咫礤, 赅蝾 鳅觏弪 磬 \"hda\" 玎 嵇疴 IDE "
-"篑蝠铋耱忸,\n"
-"\"hdb\" 玎 怛铕铗, \"sda\" 玎 嵇疴 SCSI 篑蝠铋耱忸 ...\n"
-"\n"
-"青 溧 疣玟咫栩 桤狃囗 蜮 滂耜, 祛驽蝈 溧 桤镱腌忄蝈 耠邃龛 铒鲨:\n"
-"\n"
-" * \"如麒耱 怦梓觐\": 蜞玷 铒鲨 桤蝠桠 怦梓觇 腩忮 磬 桤狃囗 滂耜.\n"
-"\n"
-" * \"棱蝾爨蜩黜 聱玟噔囗錦": 蜞玷 铒鲨 镱玮铍忄 噔蝾爨蜩黜 溧 聱玎溴蝈\n"
-"Ext2 swap 腩忮 疋钺钿眍蝾 镳铖蝠囗耱忸 磬 蜮滂 忤 滂耜.\n"
-"\n"
-" * \"扬囫 蜞犭桷囹 腩忮\": 嚓 蜞犭桷囹 腩忮 镱怵邃屙, 祛驽蝈\n"
-"溧 皴 铒栩囹 溧 恸珩蜞眍忤蝈 蜞玷 铒鲨. 填, 狷溴蝈 忭桁囹咫龛 鑌n"
-"镱祉弪, 麇 祛驽 溧 礤 耱囗.\n"
-"\n"
-" * \"满痦鑌": 桤镱腌忄轵 蜞玷 铒鲨, 玎 溧 铗戾龛蝈 镳铎屙栩.\n"
-"\n"
-" * \"橡彗囵邃鑌": 祛驽蝈 溧 桤镱腌忄蝈 蜞玷 铒鲨, 嚓 桉赅蝈 溧 恸痦弪錦n"
-"怦梓觇 镳铎屙 溧 玎疱滂蝈 嵇疴铐圜嚯磬蜞 蜞犭桷 腩忮.\n"
-"\n"
-" * \"锑泓铖龛闬": 桤镱腌忄轵 蜞玷 铒鲨, 嚓 桉赅蝈 溧 桤镱腌忄蝈 "
-"爨泓铖龛,\n"
-"溧 疣玟咫 蜮滂 忤 滂耜. 翌忄 皴 镳屣铕忄, 嚓 爨蝈 漕耱囹眍 "
-"镱珥囗\n"
-"玎 疣玟咫礤蝾.\n"
-"\n"
-" * \"满珩蜞眍忤 铗 滂耜弪郳": 蜞玷 铒鲨  忤 镱玮铍 溧 恸珩蜞眍忤蝈 "
-"玎镟珏磬\n"
-"镳邃 蝾忄 磬 滂耜弪 蜞犭桷 腩忮.\n"
-"\n"
-" * \"青镟玷 磬 滂耜弪郳": 玎镟玮 蜞犭桷囹 腩忮 磬 滂耜弪. 项脲珥 "
-"镳鑌n"
-"邂屙蝮嚯眍 恸珩蜞眍忄礤 磬 蜞犭桷囹 镳 礤钺躅滂祛耱. 谚腠 皴 "
-"镳屣铕忄\n"
-"溧 磬镳噔栩 蝾忄.\n"
-"\n"
-" * \"妙蝾忸\": 觐汔蝾 耱 疋腓 疣玟咫礤蝾 磬 蜮滂 耔 滂耜, 蝾忄 "
-"\n"
-"玎镨 镳铎屙栩 恸瘐 滂耜.\n"
-"\n"
-"青徨脲驽蜞: 祛驽蝈 溧 漕耱桡礤蝈 怦赅 铒鲨 桤镱腌忄殛 觌噔栲蝮疣蜞.\n"
-"惕磬忄轵 镳彗 腩忮蝈 桤镱腌忄殛 [Tab} 耱疱腙栩 磬泐疱/磬漕塍.\n"
-"\n"
-"暑汔蝾 桤狃囗 , 祛驽蝈 溧 桤镱腌忄蝈:\n"
-"\n"
-" * Ctrl-c, 玎 溧 聱玟噤弪 眍 (嚓 桤狃囗 镳噻屙 );\n"
-"\n"
-" * Ctrl-d, 玎 溧 桤蝠桢蝈 ;\n"
-"\n"
-" * Ctrl-m, 玎 溧 篑蜞眍忤蝈 蝾麝 磬 祛眚桊囗.\n"
-"\n"
-"狸 桧耱嚯栩 磬 PPC 爨磬, 耔泱痦  桉赅蝈 溧 聱玟噤弪 爨膪 HFS\n"
-"\"bootstrap\" 铗 镱礤 1 塘, 觐轵  狷溴 桤镱腌忄 铗 boot loader-\n"
-"yaboot. 狸 耢蜞蝈 溧 磬镳噔栩 豚 镱-泐, 磬镳桁屦 50 塘, 祛驽蝈 溧 "
-"泐\n"
-"磬戾痂蝈 玎 镱脲珥 耱, 犏溴蝾 溧 聱躔囗忄蝈 觐 漯 桦 image 磬\n"
-"ramdisk 耠篦嚅 磬 桤恸眇邃龛 耔蝮圉梃."
+#: ../../lvm.pm:1
+#, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "销疴 镳屐圊龛 腩汨黜栩 腩忸\n"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-" 蝾玷 祛戾眚, 蝠徕 溧 桤徨疱蝈 龛忸蝾 磬 耔泱痦铖, 觐弪 桉赅蝈 玎\n"
-"爨磬蜞. 项 镳噔桦, 觐腙铗 镱忮麇 爨磬蜞 忤 漕耱磬 觐腙铗 "
-"镱忮麇\n"
-"溧眄 皴 聱躔囗忄 磬 礤, 蝾腙钼 镱-忤耦觐 蝠徕 溧 龛忸蝾 磬 "
-"耔泱痦铖.\n"
-"满镳尻 蝾忄, 忤耦赅蜞 耔泱痦铖 玎 耢弪赅 磬 脲觐蜞蜞 磬 疣犷蜞.\n"
-"吾礤蝈 皴 犏 汶噔囹 MSEC 磬 Reference Manual, 玎 溧 镱塍麒蝈 镱忮麇 "
-"桧纛痨圉\n"
-"玎 珥圜屙桢蝾 磬 蝈玷 龛忄.\n"
-"\n"
-"狸 礤 珥噱蝈 赅牝 溧 桤徨疱蝈, 桤徨疱蝈 铒鲨蜞 镱 镱漯噻徼疣礤."
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "项漶忮蝽囹 玎镨  玎疱滂 噔蝾爨蜩黜 耠邃 %d 皴牦礓."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
+"湾 祛汔 溧 镨 /etc/sysconfig/bootsplash\n"
+"脏殡 礤 磬戾疱."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "软蝈痦弪 漕耱"
+
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"埋梓觇 眍忸溴翳龛疣龛 腩忮 蝠徕 溧 狷溧 纛痨囹桊囗, 玎 溧 皴 "
-"桤镱腌忄騖n"
-"(纛痨囹桊囗 铉磬鬣忄 聱玟噔囗 磬 羿殡钼 耔耱屐).\n"
-"\n"
-" 蝾玷 祛戾眚 祛驽 徼 桉赅蝈 溧 镳弭铕爨蜩疣蝈 觐 聱耱怏忄 腩忮, "
-"玎\n"
-"溧 桤蝠桢蝈 怦赅赈 溧眄, 觐栩 聱潸疰囹. 狸 桉赅蝈 溧 泐 磬镳噔栩, "
-"祛\n"
-"桤徨疱蝈 .\n"
-"\n"
-"填, 铗徨脲驽蝈, 麇 礤 礤钺躅滂祛 溧 镳弭铕爨蜩疣蝈 怦梓觇 腩忮\n"
-"聱耱怏忄 铗镳邃. 茵徕 溧 镳弭铕爨蜩疣蝈 腩忮蝈 聱潸疰帙鑌n"
-"铒屦圉桀眄囹 耔耱屐 (赅蝾 \"/\", \"/usr\" 桦 \"/var\"), 眍 蝾忄 礤 錦n"
-"玎潸腈栩咫眍 玎 腩忮 聱潸疰帙 溧眄, 觐栩 桉赅蝈 溧 玎镟玷蝈 "
-"(钺桕眍忮眍\n"
-"\"/home\").\n"
-"\n"
-"填, 狷溴蝈 忭桁囹咫龛, 觐汔蝾 桤徼疣蝈 腩忮蝈. 央邃 纛痨囹桊囗 怦梓觇\n"
-"溧眄 磬 镱耦麇龛蝈 腩忮  狷溧 桤蝠栩 爨 溧 祛驽蝈 溧 汨\n"
-"恸珩蜞眍忤蝈.\n"
-"\n"
-"助觏弪 \"OK\", 觐汔蝾 耱 泐蝾忤 溧 纛痨囹桊囹 溧腩忮.\n"
-"\n"
-"助觏弪 \"悟赅鏫", 嚓 桉赅蝈 溧 桤徨疱蝈 漯筱 腩忮 玎 桧耱嚯圉 磬 "
-"眍忄蜞\n"
-"耔 Mandrake Linux 铒屦圉桀眄 耔耱屐.\n"
-"\n"
-"助觏弪 \"袜镳邃龛鬣鈂", 嚓 桉赅蝈 溧 桤徨疱蝈 腩忮, 觐栩 溧 狷溧騖n"
-"镳钼屦屙 玎 腩 犭铌钼 铗 滂耜."
+"y 觐铕滂磬蜩 磬 蝈犟蝾忄蜞 疣礻郳n"
+" 狃铋 耔焘铍"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-" 蜞赅 ! 软耱嚯圉蜞 玎恸瘌屙 GNU/Linux 耔耱屐囹 忤 泐蝾忄 玎\n"
-"箫铗疱徉. 橡铖蝾 鳅觏弪 \"OK\", 玎 溧 疱耱囵蜩疣蝈 耔耱屐囹. 填驽蝈 溧\n"
-"耱囵蜩疣蝈 GNU/Linux 桦 Windows, 觐弪 镳邃镱麒蜞蝈 (嚓 桁囹 溻 "
-"耔耱屐),\n"
-"忮漤嚆 耠邃 赅蝾 觐祜 耱囵蜩疣 铗眍忸.\n"
-"\n"
-"馏蝾磬 \"袜镳邃龛鬣鈂" (襦祛 \"抨耧屦蝈韁") 镱赅玮 铢 溻 狍蝾磬 玎:\n"
-"\n"
-" * \"沐礤痂疣礤 磬 滂耜弪 玎 噔蝾爨蜩黜 桧耱嚯圉\": 玎 溧 聱玟噤弪錦n"
-"桧耱嚯圉桀眄 滂耜弪, 觐蝾 耠邃 蝾忄 噔蝾爨蜩黜 溧 桤鼹瘌忄 豚蜞\n"
-"桧耱嚯圉 徨 镱祛 磬 铒屦囹铕, 镳桦梓帙 磬 桧耱嚯圉蜞, 觐蝾 蝾牦-"
-"\n"
-"耱 桤恸瘌桦.\n"
-"\n"
-" 悟徨脲驽蝈, 麇 溻 疣珉梓龛 铒鲨 襦 漕耱, 黟彗 鳅赅礤 磬 狍蝾磬:\n"
-"\n"
-" * \"橡彖沭嚅\". 翌忄 鬣耱梓眍 噔蝾爨蜩玷疣磬 桧耱嚯圉 赅蝾 耱觇蝈\n"
-"镱 疣玟咫礤 磬 腩忮 铖蜞忄 桧蝈疣牝桠龛.\n"
-"\n"
-" * \"棱蝾爨蜩黜郳". 袜嵇腠 噔蝾爨蜩黜 桧耱嚯圉: 蜮滂 滂耜 皴\n"
-"镳彗囡桉忄 磬嵇腠, 怦赅赈 溧眄 皴 玎泱徕囹.\n"
-"\n"
-" 亦玷 铖钺屙铖 祉钽 箐钺磬, 觐汔蝾 桧耱嚯桊囹 泐 狃铋 镱漕犴頫n"
-"爨龛. 妈骝 皴牿蜞 玎 噔蝾爨蜩黜 桧耱嚯圉 磬 磬 web-襦轵.\n"
-"\n"
-" * \"青镟玷 桤犷疣 磬 镟赍蜩\"(*): 玎镟玮 桤犷疣 磬 镟赍蜩, 蜞赅 赅牝 "
-"錦n"
-"磬镳噔屙 镳邃. 暑汔蝾 镳噔栩 漯筱 桧耱嚯圉, 怅囵嚅蝈 滂耜弪囹 鈂n"
-"篑蝠铋耱忸蝾 矬耥弪 桧耱嚯圉蜞 溧 恸疴 黟彗 镱祛 尻疣, 赅蝾\n"
-"磬蜩耥弪 觌噔桫 [F1] 赅蝾 磬镨蝈 >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) 茵徕 忤 FAT-纛痨囹桊囗 滂耜弪 (玎 溧 聱玟噤弪 蜞赈 镱 GNU/Linux,\n"
-"磬镨蝈 \"mformat a:\")"
+"青 溧 忤滂蝈 耧桉 漕耱龛蝈 铒鲨 玎 蝈牦 镳桧蝈, 鳅觏弪 磬 狍蝾磬 "
+"\"扬桉 铒鲨 玎 镥鬣騖"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "玛膻麾囗 磬 聱疴 ..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "悟镥鬣蜮囗 磬 蝈耱钼(囹/栩) 耱疣龛(/) ..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "洛麇 桁 祛眚桊囗 磬 蝾忄 耱 %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -2026,51 +1986,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
" 蝾玷 祛戾眚 蝠徕 桤徨疱蝈 犏溴 磬 蜮滂 耔 滂耜 溧 桧耱嚯桊囹 "
"忄蜞\n"
@@ -2148,194 +2106,119 @@ msgstr ""
"祉钽 脲耥 溧 玎泱徼蝈 怦梓觇 溧眄. 亦赅 麇 礤 桤徼疣轵 蝾忄, 嚓 礤\n"
"珥噱蝈 赅赈 镳噔栩."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"袜牮,  狷溴蝈 镱镨蜞龛 溧腓 桉赅蝈 溧 忤驿囹 沭圄梓龛 桧蝈痿彘 镳鑌n"
-"玎疱驿囗. 悟徨脲驽蝈, 麇 蝾玷 恸镳铖  忤 狷溴 玎溧溴 溧驽 嚓 桤徨疱蝈,\n"
-"溧 礤 蝈耱忄蝈 磬耱痤殛囹. 西邂桎眍, 徼躜 铗泐忸痂腓 \"湾\", 嚓 "
-"爨磬蜞\n"
-" 疣犷蜩 赅蝾 聱疴 桦 嚓 爨 篑镥 磬耱痤屙 滂耧脲."
+msgid "Ukraine"
+msgstr "雨疣轫"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "橡桦铈屙桢:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "满眸屙 ISDN 祛溴"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "if set to yes, report check result by mail."
+msgstr "嚓 玎溧屙 溧, 桤镳帙 镱 镱蜞 聱钺龛 玎 疱珞腧囹."
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "锣 桤犷 ? (镱 镱漯噻徼疣礤 %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr "/ 绣汨铐"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
+"义耱钼栩 耱疣龛鲨 襦 桤镳囹屙 犏 镳桧蝈疣.\n"
+"填驽 溧 铗礤戾 爨腙 怵屐 镳邃 镳桧蝈疣 溧 玎镱黜.\n"
+"漾耱龛 磬 镥鬣蜞:\n"
+"%s\n"
+"\n"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"彦汔 祛驽蝈 溧 桤徨疱蝈 觐 篑塍汨 溧 皴 矬耜囹 镳 耱囵蜩疣礤.\n"
-"\n"
-"殷 襦 镳邃耱噔屙 怦梓觇 篑塍汨, 漕耱龛 磬耱蜞 桧耱嚯圉.\n"
-"橡邈脲溧轵 汨 忭桁囹咫眍 桤觌弪 蝈玷, 觐栩 礤 忤 蝠徕囹 忤磬汨 镳 "
-"耱囵蜩疣礤.\n"
-"\n"
-"填驽蝈 忤滂蝈 牮囹 钺耥栩咫屙 蝈犟 玎 篑塍汔蜞, 赅蝾 镱耱噔栩 牦痤疣 磬 "
-"扈囹 耔\n"
-"磬 桁弪 磬 篑塍汔蜞. 狸 礤 耱 耔泱痦, 溧腓 篑塍汔蜞 镱脲珥 桦 礤, "
-"镱-漕狃錦n"
-" 溧 铖蜞忤蝈 桤犷疣 镱 镱漯噻徼疣礤.\n"
-"\n"
-"马桁噔嚅蝈 蜞玷 耱赅, 嚓 耢蜞蝈 溧 桤镱腌忄蝈 爨磬蜞 耔 赅蝾 "
-"聱疴:\n"
-"耔泱痦 礤 徼躜 桉赅腓 溧 矬耜囹 篑塍汨, 铗 觐栩 礤 皴 眢驿噱蝈. 填,\n"
-"玎镱祉弪, 麇 觐 篑塍汨 祛汔 溧 狷溧 铒囫龛, 嚓 襦 怅膻麇龛 磬 "
-"聱疴.\n"
-"项 镳桧鲨, 桤徼疣轵 襦祛 篑塍汨蝈, 铗 觐栩 磬桉蜩磬 皴 眢驿噱蝈."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and one unknown printer"
+msgstr " 邃桧 礤桤忮耱屙 镳桧蝈"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "瑞豚礓"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "忮瘃 磬 漯铗"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " 暑眙桡箴圉 玎 恸珩蜞眍忄礤 "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "埋梓觐 镳噔桦眍 腓 ?"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2371,6155 +2254,6311 @@ msgstr ""
"疋腓\n"
" 磬耱痤殛囹 磬 祓彐囹, 鳅觏弪 \"悟赅鏫"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"袜牮, 玎忤耔祛耱 铗 桤犷疣 忤 溧腓 溧 桤徼疣蝈 镟赍蜩 邃桧 镱 邃桧, \n"
-"忤 狷溴 镳邃耱噔屙 潸疴 聱潸疰帙 怦梓觇 镟赍蜩 镱漯邃屙 镱 沭箫 鑌n"
-"镱漯沭箫. 念赅蝾 钺躅驿囹 潸疴铗, 祛驽蝈 溧 桤徨疱蝈 鲥腓 沭箫, "
-"镱溷痼镨\n"
-"桦 铗溴腠 镟赍蜩.\n"
-"\n"
-"暑汔蝾 镱耦麒蝈 镟赍 铗 潸疴铗,  皴 镱忤 铒桉囗桢 怃耥. 暑汔蝾\n"
-"桤犷瘊 镳桕膻麇, 鳅觏弪 狍蝾磬 \"软耱嚯桊嚅\", 觐轵  矬耥 镳铞羼郳n"
-"磬 桧耱嚯圉. 玎忤耔祛耱 铗 耜铕铖蝌 磬 踵痄箦疣 忤 狃 磬 镟赍蜩蝈,\n"
-"觐栩 桉赅蝈 溧 狷溧 桧耱嚯桊囗, 镳铞羼 祛驽 溧 铗礤戾 桤忮耱眍 怵屐.\n"
-"西嚓忄眍蝾 怵屐 玎 镳桕膻麾囗 磬 镳铞羼, 麇 狷溴 镱赅玎眍 磬 尻疣蜞, 玎\n"
-"溧 忤 镱祛沩 溧 镳弼屙栩 溧腓 桁囹 漕耱囹眍 怵屐 溧 皴 磬耠噤栩 磬\n"
-"鬣 赅翦.\n"
-"\n"
-"!! 狸 桤狃囗 聱疴屙 镟赍, 徼腩 蝾 箪桫脲眍 桦 玎蝾 鬣耱 铗 豚\n"
-"沭箫,  狷溴蝈 镱祛脲龛 玎 镱蜮驿屙桢, 麇 磬桉蜩磬 桉赅蝈 蝾玷 聱疴\n"
-"溧 狷溴 桧耱嚯桊囗. Mandrake Linux, 怦梓觇 聱疴 蝠忄 镱 "
-"镱漯噻徼疣礤\n"
-"镳 玎疱驿囗.泥驽 嚓 襦 耔泱痦 爨 桤忮耱龛 镳钺脲扈, 觐汔蝾\n"
-"滂耱痂狍鲨蜞 皴 疣顼痤耱疣忄, 祛驽 溧 皴 耠篦 蜞赅, 麇 溧 皴 镱騖n"
-"潴镪 耔泱痦铖蝌, 耠邃 赅蝾 忮瘃蜞 磬 Mandrake Linux 玎恸瘌屙. 狸頫n"
-"礤 珥噱蝈 玎 赅赈 耠箧 铒疱溴脲磬 篑塍汔 桦 玎 桧耱嚯桊囗, 鳅觏弪錦n"
-"\"湾\". 鳅赅礤 磬 \"泥\"  桧耱嚯桊囹 桤狃铄龛 篑塍汨 蝈  狷溧騖n"
-"耱囵蜩疣龛 噔蝾爨蜩黜 镱 镱漯噻徼疣礤. !!\n"
-"\n"
-"物鲨蜞 \"棱蝾爨蜩黜 玎忤耔祛耱鑌" 桤觌忄 镳邃箫疱滂蝈腠栩 滂嚯铉,\n"
-"觐汔蝾 桧耱嚯囹铕 噔铎囹梓眍 疱 桤徨疱 镟赍. 翌忄 皴 耠篦忄, 玎蝾\n"
-" 疱, 麇 皴 眢驿噱 溧 玎漕忸腓 玎忤耔祛耱 漯筱 镟赍, 玎 溧 镳桕膻麒\n"
-"篑镥 桧耱嚯圉蜞.\n"
-"\n"
-"锑腙囹 桕铐赅 磬 滂耜弪赅 潸眍蝾 磬 耧桉 镱玮铍忄 溧 玎疱滂蝈 耧桉\n"
-" 镟赍蜩 铗 镳邃桫磬 桧耱嚯圉. 狸 鳅觏弪 磬 蜞玷 桕铐赅,  狷溴蝈\n"
-"镱祛脲龛 溧 怅囵囹 滂耜弪 聱玟噤屙 镳邃 蝾忄 牮 磬 漯筱 "
-"桧耱嚯圉.\n"
-"妈骝 怛铕囹 镱漶赅珀 镱 怵屐 磬 镱耠邃磬蜞 耱赅, 玎 蝾忄 赅 溧\n"
-"聱玟噤弪 蜞赅忄 滂耜弪."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Wizard Configuration"
+msgstr "暑眙桡箴圉 磬 锑泓铖龛"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"彦汔 祛戾眚 溧 铒疱溴腓蝈 觐 镳钽疣扈 桉赅蝈 溧 狷溧 桧耱嚯桊囗 磬\n"
-"耔耱屐囹 忤. Mandrake Linux 滂耱痂狍鲨蜞 桁 蹊滂 镟赍蜩, 眍 礤 錦n"
-"玎潸腈栩咫眍 溧 汨 珥噱蝈 磬桤篑.\n"
-"\n"
-"狸 桤恸瘌忄蝈 耱囗溧痱磬 桧耱豚鲨 铗 CDROM, 嵇疴  狷溴蝈 镱镨蜞龛 觐鑌n"
-"CD-蜞 桁囹 ( 抨耧屦蝈 疱骅). 橡钼屦弪 玎汶噔蜞 磬 CD-蜞蜞 镱耦麇蝈\n"
-"牦蜩殛栩 聱铗忮蝰蜮帙 磬 CD-蜞蜞, 觐栩 疣顼铍嚆囹. 助觏弪 \"OK\",\n"
-"觐汔蝾 耱 泐蝾忤 溧 镳钿骅蝈.\n"
-"\n"
-"相赍蜩蝈 襦 镱漯邃屙 沭箫 聱铗忮蝰蜮帙 磬 镳嚓蜩麇耜囹 箫铗疱徉 磬\n"
-"爨磬蜞 忤. 灭箫栩, 襦扈 镱 皴徨 耔, 襦 镱漯邃屙 麇蜩痂 皴牿梃:\n"
-"\n"
-" * \"朽犷蝽 耱囗鲨\": 嚓 耢蜞蝈 溧 桤镱腌忄蝈 爨磬蜞 耔 赅蝾 疣犷蝽 "
-"耱囗鲨,\n"
-"桤徨疱蝈 邃磬 桦 镱忮麇 聱铗忮蝽栩 沭箫.\n"
-"\n"
-" * \"朽琊噌铗赅\": 嚓 爨磬蜞 忤  狷溴 桤镱腌忄礤 玎 镳钽疣扈疣礤, "
-"桤徨疱蝈\n"
-"驽豚磬蜞(栩) 沭箫().\n"
-"\n"
-" * \"漾疴\": 磬牮, 嚓 爨磬蜞 忤  狷溴 桤镱腌忄磬 玎 聱疴, \n"
-"祛驽蝈 溧 桤徨疱蝈 觐 铗 磬-麇耱 桤镱腌忄龛蝈 篑塍汨 桉赅蝈 溧 桁囹錦n"
-"桧耱嚯桊囗 磬 爨磬蜞.\n"
-"\n"
-" * \"灭圄梓磬 耩邃郳": 蝮 祛驽蝈 溧 桤徨疱蝈 镳邃镱麒蜞磬蜞 沭圄梓磬 "
-"耩邃.\n"
-"项礤 邃磬 蝠徕 溧 狷溴 桤狃囗, 嚓 桉赅蝈 溧 桁囹 沭圄梓磬 耩邃 !\n"
-"\n"
-"橡屐羼蜮嚅觇 牦瘃铕 磬 扈囹 磬 桁弪 磬 沭箫囹,  忤滂蝈 牮囹\n"
-"钺耥屙栩咫屙 蝈犟 玎 礤.\n"
-"\n"
-"填驽蝈 溧 鳅觏弪 牦蜩殛囹 \"软滂忤潴嚯屙 桤犷 磬 镟赍蜩\", 觐蝾 "
-"镱脲珥,\n"
-"嚓 耱 玎镱珥囹 镟赍蜩蝈, 觐栩  忤 狷溧 镳邃腩驽龛 桦 嚓 桉赅蝈 "
-"溧\n"
-"桁囹 嵇脲 觐眚痤 磬 蝾忄, 觐弪 溧 狷溴 桧耱嚯桊囗.\n"
-"\n"
-"狸 耱 玎镱黜嚯 桧耱嚯圉蜞 疱骅 磬 \"吾眍忄礤\", 祛驽蝈 溧 "
-"桤觌栩錦n"
-"怦梓觇 沭箫, 玎 溧 桤徨沩弪 桧耱嚯桊囗弪 磬 眍忤 镟赍蜩. 翌忄 镱脲珥頫n"
-"镳 镱镳噔赅 桦 钺眍忄礤 磬 聱耱怏忄蜞 耔耱屐."
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Autoprobe"
+msgstr "棱蝾爨蜩黜 玎耔鬣礤"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files..."
msgstr ""
-"软耱嚯圉蜞 磬 Mandrake Linux 疣顼铍铈屙 磬 觐腙 CDROM-. DrakX\n"
-"珥噱 溧腓 桤狃囗 镟赍 礤 皴 磬扈疣 磬 漯筱 CDROM 桦  桤忄滂 蝈牦蝾\n"
-"CD  忤 铖蜞忤 溧 怅囵囹 蝾忄, 铗 觐弪 桁 眢驿."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../install_any.pm:1
+#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "湾 祛驽蝈 溧 桤镱腌忄蝈 broadcast 徨 NIS 漕戾轫"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "如蝠桠囗 磬 镳桧蝈 \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"项-泐疱 襦 桤狃铄龛 玎皴麇龛蝈 Linux 腩忮 聱耱怏忄\n"
-"磬 蜮滂 忤 滂耜. 填驽蝈 溧 玎镟玷蝈 桤犷疣 磬镳噔屙 铗 爨泓铖龛赅, 蝈 襦\n"
-"漕狃 玎 钺 箫铗疱徉. 狸 汨 镳铎屙栩, 蝠徕 溧 镱礤 溧 铒疱溴腓蝈\n"
-"root (\"/\"). 湾 桤徼疣轵 镳尻嚯屙 爨腙 腩忮, 玎蝾 爨 溧 "
-"祛驽蝈\n"
-"溧 桧耱嚯桊囹 漕耱囹眍 耦趄箦. 狸 桉赅蝈 溧 聱躔囗忄蝈 溧眄栩 耔 磬\n"
-"铗溴脲 , 蝠徕 溧 桤徨疱蝈 \"/home\" (恸珈铈眍 襦祛, 嚓 桁囹 "
-"镱忮麇\n"
-"铗 邃桧 Linux ).\n"
-"\n"
-"\n"
-"青 桧纛痨圉, 怦尻 镱赅玎, 赅牝 耠邃忄: \"褥錦", \"枢镟鲨蝈騖".\n"
-"\n"
-"\n"
-"\"褥弪頫" 皴 觐滂疣 赅牝 耠邃忄: \"蜩 磬 滂耜郳", \"眍戾 磬 滂耜郳",\n"
-"\"眍戾 磬 隲" (磬镳桁屦, \"hda1\").\n"
-"\n"
-"\n"
-"\"诣嵇 磬 滂耜郳" 祛驽 溧 \"hd\", 嚓 IDE 蜮 滂耜, 桦 \"sd\", 嚓 "
-"錦n"
-"SCSI 蜮 滂耜.\n"
-"\n"
-"\n"
-"\"皖戾瘊 磬 滂耜郳" 忤磬汨 狍赈囹 耠邃 \"hd\" 桦 \"sd\". 橡 IDE "
-"滂耜钼:\n"
-"\n"
-" * \"a\" 铉磬鬣忄 \"master 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
-" * \"b\" 铉磬鬣忄 \"slave 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
-" * \"c\" 铉磬鬣忄 \"master 滂耜 磬 怛铕 IDE 觐眚痤脲餦",\n"
-" * \"d\" 铉磬鬣忄 \"slave 滂耜 磬 怛铕 IDE 觐眚痤脲餦".\n"
-"\n"
-"\n"
-"橡 SCSI 篑蝠铋耱忄, \"a\" 铉磬鬣忄 \"嵇疴 蜮 滂耜\", \"b\" 铉磬鬣忄 "
-"\"怛铕 蜮 滂耜\" ..."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-"GNU/Linux 祉钽铒铗疱徼蝈腭赅 耔耱屐, 觐蝾 铉磬鬣忄, 麇 怦尻 镱蝠遽栩咫 "
-"祛驽\n"
-"溧 桁 疋铊 镳邃镱麇蜞龛, 羿殡钼 ... 祛驽蝈 溧 镳铟弪弪 喧觐忸耱忸蝾 "
-"磬\n"
-"项蝠遽栩咫, 玎 溧 磬篦栩 镱忮麇.\n"
-"青 疣珉桕 铗 Root, 觐轵 噤扈龛耱疣蝾瘊, 镱蝠遽栩咫栩, 觐栩  "
-"漕徉忤蝈 蝮闬n"
-"爨 溧 祛汔 溧 镳铎屙 龛 铖忮 耦狁蜮屙栩 耔 羿殡钼 蝈蹴栩 "
-"磬耱痤殛.\n"
-"馘 蝠徕 溧 聱玟噤弪 镱礤 邃桧 钺桕眍忮 镱蝠遽栩咫 玎 皴徨 耔.\n"
-" 蝾玷 嚓囿眚  蝠徕 溧 怆桤囹 玎 痼蜩眄 溴轫铖. 满镳尻 蝾忄 "
-"镳嚓蜩赅蜞\n"
-"溧 怆桤囹 赅蝾 root 彐邃礤忭, 祛驽 溧 狷溴 祉钽 铒囫磬 ! 磬-"
-"爨腙囹嚆疱郳n"
-"祛驽 溧 铉磬鬣忄, 麇 耔耱屐囹 忤 爨 溧 疣犷蜩 镱忮麇. 狸 磬镳噔栩 觐 "
-"皴痂铉磬\n"
-"沭屮赅 赅蝾 镱蝠遽栩咫, 蝾忄 祛驽 襦 溧 漕忮溴 漕 玎泱徉 磬 鬣耱 铗 "
-"桧纛痨圉蜞,\n"
-"眍 礤 磬 豚蜞 耔耱屐.\n"
-"\n"
-"销疴, 蝠徕 溧 耔 恸忮溴蝈 桁弪. 翌忄 礤 玎潸腈栩咫眍, 疣玑桊 皴, "
-"怦眍耱\n"
-"祛驽蝈 溧 恸忮溴蝈 赅赈铗 溧 . DrakX 耠邃 蝾忄  桤徨疱 嵇疴囹 "
-"恸忮溴磬\n"
-" 牦蜩殛囹 潴爨  泐 桤赅疣 赅蝾 镱蝠遽栩咫耜 桁. 翌忄 桁弪, "
-"觐弪頫n"
-"怦眍耱 铒疱溴脲龛 镱蝠遽栩咫  怆桤 耔耱屐囹. 填驽蝈 溧 泐 "
-"镳铎屙栩.\n"
-"茵徕 溧 恸忮溴蝈 镟痤豚 蝮. 相痤豚蜞 磬 礤镳邂桦邈桊钼囗 (钺桕眍忮) "
-"镱蝠遽栩咫\n"
-"礤 蝾腙钼 羿蜞腠 赅蝾 蜞玷 磬 Root 铗 汶邃磬 蝾麝 磬 耔泱痦铖蝌, 眍 "
-"怦錦n"
-"镟 爨 镳梓桧 溧 镱漩屙忄蜞, 蝥 赅蝾 痂耜筲囹 羿殡钼弪 耔.\n"
-"\n"
-"央邃 赅蝾 鳅觏弪 磬 \"橡桢扈 镱蝠遽栩咫\", 祛驽蝈 溧 漕徉忤蝈 觐腙铗 耔 "
-"桉赅蝈.\n"
-"念徉忮蝈 镱 邃桧 镱蝠遽栩咫 玎 怦尻 铗 镳蝈腓蝈 耔: 徉 耔, 皴耱疣 耔, "
-"磬镳桁屦.\n"
-"暑汔蝾 耱 漕徉忤腓 怦梓觇 镱蝠遽栩咫, 觐栩 桉赅蝈, 鳅觏弪 妙蝾忸.\n"
-"\n"
-"助觏弪 磬 狍蝾磬 \"袜镳邃龛鬣鈂", 玎 溧 镳铎屙栩 钺忤怅囹 镱 镱漯噻徼疣礤 "
-"磬\n"
-"镱蝠遽栩咫 (bash 镱 镱漯噻徼疣礤)."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"橡邃 溧 镳钿骅蝈, 蝠徕 忭桁囹咫眍 溧 镳铟弪弪 篑腩忤蜞 磬 腓鲥礴. "
-"翌閈n"
-"镱牮桠 豚蜞 Mandrake Linux 滂耱痂狍鲨, , 嚓 礤 耱 聱汶囫龛 怦梓觇 "
-"篑腩忤\n"
-" 礤泐, 鳅觏弪 磬 狍蝾磬 悟赅. 翌忄 礤玎徉忭  镳桕膻麒 桧耱嚯圉蜞. 青 "
-"溧\n"
-"镳钿骅蝈 桧耱嚯圉蜞, 鳅觏弪 磬 狍蝾磬 橡桢扈."
+#: ../../lang.pm:1
+#, c-format
+msgid "Peru"
+msgstr "襄痼"
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You must also format %s"
-msgstr "妈 蝠徕 聱 溧 纛痨囹桊囹 %s"
+msgid " on device: %s"
+msgstr " 磬 篑蝠铋耱忸: %s"
-#: ../../install2.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Remove Windows(TM)"
+msgstr "橡屐圊龛 Windows(TM)"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "羊囵蜩疣 X Font Server (蝾忄 玎潸腈栩咫眍, 玎 溧 蝠礤 XFree)."
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"爨 漕耱 溧 祛潴腓蝈 磬 漯铗 聱铗忮蝰蜮帙 磬 忄 (羿殡 %s 腓锺忄), "
-"蝾忄 铉磬鬣忄, 麇 忄蝾 綦铒 礤 耔眭痤龛玷疣眍 桧耱嚯圉桀眄 眍耔蝈 "
-"(祛 磬镳噔弪 眍忸 boot 綦铒)"
+"项忮麇蝾 铗 蝈玷 耱铋眍耱 襦 桤怆鬻屙鑌n"
+"铗 忄蜞 疣犷蝈 耔耱屐.\n"
+"妈 祛驽 溧 汨 镳铎屙栩 镳 礤钺躅滂祛耱."
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-"项忤 皴 沭屮赅 - 礤 襦 铗牮栩 忄腓漤 篑蝠铋耱忄, 恸瘐 觐栩 溧 狷溧 "
-"聱玟噤屙 眍忤 羿殡钼 耔耱屐. 填 镳钼屦弪 蜮滂 耔 滂耜 耔 玎 "
-"镳梓桧囹 玎 蝾玷 镳钺脲"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "灭屮赅 镳 麇蝈礤蝾 磬 羿殡 %s"
+msgid "Madagascar"
+msgstr "锑溧汔耜囵"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
msgstr ""
-"青 溧 桤镱腌忄蝈 玎镟珏 桤犷 磬 镟赍蜩, 耱囵蜩疣轵 桧耱嚯圉蜞 ``linux "
-"defcfg=floppy''"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "亦玷 滂耜弪 礤 纛痨囹桊囗 磬 FAT"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "央铈弪 FAT 纛痨囹桊囗 滂耜弪 篑蝠铋耱忸 %s"
+msgid "System"
+msgstr "谚耱屐"
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "湾 祛驽蝈 溧 桤镱腌忄蝈 broadcast 徨 NIS 漕戾轫"
+msgid "Do you want to use this feature?"
+msgstr "锐赅蝈 腓 溧 桤镱腌忄蝈 蜞玷 铖钺屙铖?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
"\n"
-"Do you really want to remove these packages?\n"
+"- Options:\n"
msgstr ""
-"央邃龛蝈 镟赍蜩  狷溧 桤蝠栩 玎 溧 皴 镱玮铍 钺眍忄礤 磬 耔耱屐囹: %"
-"s\n"
-"\n"
"\n"
-"腻轳蜮栩咫眍 腓 桉赅蝈 溧 桤蝠桢蝈 蝈玷 镟赍蜩?\n"
+"- 物鲨:\n"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No"
-msgstr "湾"
+msgid "Password required"
+msgstr "如桉赈 镟痤豚"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../common.pm:1
#, c-format
-msgid "Yes"
-msgstr "泥"
+msgid "%d minutes"
+msgstr "%d 扈眢蜩"
-#: ../../install_any.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"如狃嚯 耱 耠邃龛(蝈) 聱疴(): %s\n"
-"\n"
-"\n"
-"义玷 聱疴 皴 嚓蜩忤疣 镱 镱漯噻徼疣礤. 义 爨 桤忮耱龛 镳钺脲扈 聱馶n"
-"耔泱痦铖蝌, 眍 祛驽 溧 皴 磬戾 眍忤. 蝾玷 耠篦嚅,  蝠徕 溧 耱錦n"
-"耔泱痦, 麇  磬溷疣驿囹 恸珈铈眍 磬-狷痃.\n"
-"\n"
-"\n"
-"袜桉蜩磬 腓 桉赅蝈 溧 桧耱嚯桊囹 蝈玷 聱疴 ?\n"
+msgid "Graphics card: %s"
+msgstr "灭圄梓磬 赅痱: %s"
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "System configuration"
-msgstr "暑眙桡箴圉 磬 耔耱屐"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "System installation"
-msgstr "软耱嚯圉 磬 耔耱屐"
+msgid "XFree configuration"
+msgstr "袜耱痤殛 磬 XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "如觌忄礤 磬 祓彐囹"
+msgid "Choose action"
+msgstr "如徨疱蝈 溴轳蜮桢"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "玛膻麾囔 祓彐囹"
+msgid "French Polynesia"
+msgstr "责屙耜 项腓礤玷"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+"项 镱漯噻徼疣礤, DrakX 镳邃镱豚汔 麇 桁囹 溻筢篁铐磬 扈  怅膻麒\n"
+"耔祗腓疣礤 磬 蝠 狍蝾磬. DrakX 噔蝾爨蜩黜 疣玑桊 溧腓 PS/2, 皴痂轫 "
+"桦鑌n"
+"USB 扈.\n"
+"\n"
+"狸 桉赅蝈 溧 铒疱溴腓蝈 漯筱 蜩 磬 扈囹, 桤徨疱蝈 镱漉钿 铗 耧桉,\n"
+"觐轵  忤 狷溴 镳邃耱噔屙.\n"
+"\n"
+"狸 桤徨疱蝈 扈 疣珉梓磬 铗 蜞玷 镱 镱漯噻徼疣礤,  忤 狷溴 镳邃铖蜞忮韁n"
+"尻疣 玎 镳钺. 如镱腌忄轵 狍蝾龛蝈 觐脲膂弪, 玎 溧 镳钼屦栩, 麇\n"
+"磬耱痤殛囹 漕疣. 狸 扈囹 礤 疣犷蜩, 赅牝 蝠徕, 磬蜩耥弪 桧蝈疴嚯\n"
+"桦 雅 纶型乓 犏 \"悟赅鏫" 桤徨疱蝈 镟."
+
+#: ../../services.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "湾篑镥 疣玟咫礤 磬: %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "项滗瘊骊 磬 OKI 4w 聱忪羼蜩扈 win-镳桧蝈痂."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "项祛桕 玎 疣玟咫桧 磬 腩忮 磬 DrakX 磬戾痂 耠邃龛蝈 疱龛:"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "象耥 ALSA (Advanced Linux Sound Architecture) 玮箨钼囹 耔耱屐"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "湾 祛汔 溧 磬戾 龛赅赈 耱 玎 桧耱嚯圉"
+msgid "Installing driver for %s card %s"
+msgstr "软耱嚯桊囗 磬 漯嚅忮 玎 %s 镫囹赅 %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"彦汔 祛驽蝈 溧 疣玟咫栩 %s.\n"
-"暑汔蝾 耱 泐蝾忤, 礤 玎狃噔轵 溧 玎镨蝈 桤镱腌忄殛 `w'"
+"橡艴恸痣桦 耱 镳桧蝈 镱 镱漯噻徼疣礤 (\"%s\"), 锐赅蝈 腓 溧 泐 铖蜞忤蝈 "
+"镱 镱漯噻徼疣礤 眍忄蜞 镳桧蝈痦 耔耱屐 %s ?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Use fdisk"
-msgstr "如镱腌忄 fdisk"
+msgid "Enable Server"
+msgstr "玛膻麾 漾疴"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "孰桢眚耜 疣玟咫礤 磬 滂耜"
+msgid "Ukrainian"
+msgstr "雨疣桧耜"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "卵茸嗜 聱耱怏忄 腩忮 溧眄栩e 恸瘐 磬 %s  狷溧 玎泱徨龛"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"爨 漕耱 漕 祓彐囹 蜞犏 礤 祛驽 溧 狷溴 篑蜞眍忮. 填, "
+"镳钼屦弪 磬耱痤殛囹 踵痄箦疣 耔. 翌汔忄 铒栩嚅蝈 溧 磬耱痤栩 "
+"铗溧脲麇龛 镳桧蝈 铗眍忸."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "桁囹 镱忮麇 铗 邃桧 蜮滂 滂耜钼, 觐 溧 桤镱腌忄 玎 桧耱嚯圉蜞?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "央铈弪 耱囵蜩疣蜞 滂耜弪 篑蝠铋耱忸 %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "如蝠栝 鲥腓 滂耜"
+msgid "Local network(s)"
+msgstr "祟赅腠 祓彐()"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
msgstr "橡屐圊龛 Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "爨 FAT 腩忮 玎 耢磬 磬 泐脲扈磬蜞 (桦 爨 漕耱帔黜 耱)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "USB 觐眚痤脲痂"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
+"LILO (桦 LInux LOader) Grub 襦 bootloader-: 蝈 祛汔 溧 耱囵蜩疣騖n"
+"GNU/Linux 桦 觐 溧 漯筱 铒屦圉桀眄 耔耱屐 聱耱怏忄 磬 觐祜 "
+"忤.\n"
+"吾桕眍忮眄, 蝈玷 漯筱 铒屦圉桀眄 耔耱屐 皴 玎耔鬣 桧耱嚯桊囹\n"
+"镳噔桦眍. 狸 蝾忄 礤 耱噔 镳 忄, 祛驽蝈 溧 漕徉蝈 玎镨耔 磬 瘊赅 鈂n"
+"蝾玷 尻疣. 秒邃嚅蝈 溧 桤徨疱蝈 忮痦 镟疣戾蝠.\n"
+"\n"
+"\n"
+"填驽 溧 礤 桉赅蝈 溧 溧忄蝈 漕耱 漕 蝈玷 铒屦圉桀眄 耔耱屐 磬 龛觐,\n"
+" 觐轵 耠篦嚅 祛驽蝈 溧 桤蝠桢蝈 聱铗忮蝽栩 玎镨耔. 皖 蜞犏 耠篦嚅,\n"
+" 皴 眢驿噱蝈 铗 boot-滂耜弪, 玎 溧 汨 耱囵蜩疣蝈 !"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "湾篑镥 镳屦噻溴礤 磬 FAT: %s"
+msgid "System mode"
+msgstr "谚耱屐屙 疱骅"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "如麒耠忄 沭囗桷栩 磬 Windows 羿殡钼囹 耔耱屐"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"青 溧 镥鬣蜩蝈 磬 NetWare 镳桧蝈 ,蝠徕 溧 珥噱蝈 桁孱 祗 恸珈铈眍\n"
+"噤疱襦 磬 聱疴, 赅牝 桁弪 磬 铒帏赅蜞,镱蝠遽栩咫耜铗 桁,镟痤豚. "
+"(玎徨脲骊! 蝾 祛驽 溧 疣珉梓屙 铗 TCP/IP 桁 磬 躅耱!)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Resizing"
-msgstr "橡铎磬 磬 泐脲扈磬蜞"
+msgid "Netmask:"
+msgstr "甜彐钼 爨耜:"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "partition %s"
-msgstr " %s"
+msgid "Append"
+msgstr "念嵇脞囗"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "暑腙 桉赅蝈 溧 铖蜞忤蝈 玎 windows?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"峦忍劳扰!\n"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"DrakX 蝠徕 溧 镳屦噻溴腓 锣 Windows . 龙溴蝈 忭桁囹咫龛: 蜞玷 "
-"铒屦圉 錦n"
-"铒囫磬. 狸 铢 礤 耱 泐 磬镳噔桦, 蝠徕 嵇疴 溧 矬耥弪 scandisk (鑌n"
-"邂屙蝮嚯眍 溧 桤镱腌忄蝈 defrag) 镱 Windows 恸瘐 蝾玷 , 蝾汔忄 \n"
-"镱怛铕弪 桧耱嚯圉栲蜞. 凌 徼腩 漕狃 溧 磬镳噔栩 囵蹊 磬 溧眄栩 耔.\n"
-"暑汔蝾 耱 耔泱痦, 磬蜩耥弪 问."
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"锣 Windows 祉钽 麴嚆戾眚桊囗, 祛 嵇疴 耱囵蜩疣轵 ''defrag''"
+"棱蝾爨蜩黜囹 桧耱嚯圉 祛驽 溧 狷溴 磬嵇腠 噔蝾爨蜩玷疣磬,\n"
+" 蜞犏 耠篦嚅  镳邂珏戾 蜮滂 忤 滂耜 !!!\n"
+"(蝾忄 玎 镳邃磬珥圜屙 玎 桧耱嚯桊囗 磬 漯筱 爨磬).\n"
+"\n"
+"填驽 徼 桉赅蝈 溧 镱怛铕栩 桧耱嚯圉蜞.\n"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "如麒耠忄 疋钺钿眍蝾 耱 磬 Windows "
+msgid "Network printer \"%s\", port %s"
+msgstr "甜彐钼 镳桧蝈 \"%s\", 镱痱 %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"湾 恸珈铈眍耱 玎 疣犷蜞 忄 FAT , \n"
-"镱疣滂 镱塍麇磬蜞 沭屮赅: %s"
+"填 桤徨疱蝈 觐 祓彐钼 噤囡蝈 溧 狷溴 怅膻麇 犏 腩赅腠囹 忤 祓彐."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "暑 驽豚弪 溧 镳铎屙栩?"
+msgid "OK to restore the other files."
+msgstr "OK 玎 恸珩蜞眍忄礤 磬 漯筱 羿殡钼."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "如镱腌忄 疋钺钿眍蝾 耱 磬 Windows 豚"
+msgid "Please choose your keyboard layout."
+msgstr "填, 桤徨疱蝈 镱漯彐溧礤 磬 觌噔栲蝮疣蜞."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"爨 FAT 腩忮 玎 桤镱腌忄礤 赅蝾 loopback (桦 爨 漕耱囹眍 耱 磬 "
-"滂耜)"
+msgid "Printer Device URI"
+msgstr "襄鬣蜞 篑蝠铋耱忸 URI"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "妙脲扈磬 磬 swap-豚 MB: "
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "妙脲扈磬 磬 root-豚 MB: "
+msgid "Terminal-based"
+msgstr "拎玷疣磬 磬 蝈痨桧嚯"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "如徨疱蝈 泐脲扈龛蝈"
+msgid "Installing a printing system in the %s security level"
+msgstr "软耱嚯桊囗 磬 镳桧蝈痦囹 耔耱屐 %s 龛忸 磬 耔泱痦铖"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "暑 桉赅蝈 溧 桤镱腌忄蝈 玎 Linux4Win ?"
+msgid "The user name is too long"
+msgstr "翌忄 桁 蜮溴 潸脬"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "如镱腌忄 玎 Windows 膪 玎 loopback"
+msgid "Other OS (windows...)"
+msgstr "酿筱 窝 (Windows...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "爨 , 觐轵 祛汔 溧 桤镱腌忄"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "如镱玮囗 磬 聱耱怏忄 "
+msgid "Reading printer database..."
+msgstr "族蝈礤 磬 徉玎蜞 溧眄 铗 镳桧蝈痂 ..."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "爨 漕耱囹眍 耱 玎 聱玟噔囗 磬 眍 "
+msgid "Generate auto install floppy"
+msgstr "项溷铗忤 滂耜弪 玎 噔蝾爨蜩黜 桧耱嚯圉"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use free space"
-msgstr "如镱腌忄 疋钺钿眍蝾 耱"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "茵徕 溧 桁囹 FAT 祛眚桊囗 /boot/efi"
+msgid "Somalia"
+msgstr "杨爨腓"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "No open source driver"
msgstr ""
-"爨蝈 swap-隲n"
-"\n"
-"泥 镳钿驵 腓 怦 镟 ?"
-#: ../../install_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"茵徕 溧 桁囹 root-.\n"
-"青蝾忄 聱玟嚅蝈 (桦 鳅觏弪 磬 聱耱怏忄).\n"
-"翌汔忄 桤徨疱蝈 溴轳蜮桢 ``耱 磬 祛眚桊囗'' 泐 耠铈弪 `/'"
+"项漕犴 磬 镳邃桫眍蝾 龛忸, 眍 耔耱屐囹 磬嵇腠 玎蜮铕屙.\n"
+"丸忸蝾 磬 耔泱痦铖 磬 爨犟桁箪 耔."
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"奏耱 铗 踵痄箦疣 磬 觐祜 忤 皴 眢驿噱 铗 ``耦狁蜮屙栩 耔'' 漯嚅忮痂, "
-"玎 溧 疣犷蜩.\n"
-"填驽蝈 溧 磬戾痂蝈 镱忮麇 桧纛痨圉 玎 蝾忄 磬: %s"
+msgid "Nicaragua"
+msgstr "丸赅疣泱"
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"项玟疣怆屙, 桧耱嚯圉蜞 镳尻膻麇磬.\n"
-"橡屐圊礤蝈 耱囵蝾忸蝾 篑蝠铋耱忸 磬蜩皴礤 Enter 玎 溧 疱耱囵蜩疣轵.\n"
-"\n"
-"\n"
-"青 桧纛痨圉 铗眍耥 镱镳噔觇, 磬 蜞玷 忮瘃 磬 Mandrake Linux,\n"
-"皴 觐眈箅蜩疣轵 Errata, 磬 噤疱 : \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"软纛痨圉 玎 磬耱痤殁囗 磬 耔耱屐囹 忤 祛驽蝈 溧 磬戾痂蝈 鈂n"
-"耠邃桧耱嚯圉桀眄囹 汶噔 铗 Official Mandrake Linux User's Guide."
+msgid "New Caledonia"
+msgstr "皖忄 枢脲漕龛"
-#: ../../install_messages.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "European protocol (EDSS1)"
+msgstr "橡铗铌铍 赔痤镟 (EDSS1)"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"马桁囗桢\n"
-"\n"
-"填, 镳铟弪弪 篑腩忤蜞 镱-漕塍. 狸 礤 耱 聱汶囫龛 觐 铗 ,\n"
-"礤 祛驽蝈 溧 镳钿骅蝈 桧耱嚯圉蜞 磬 耠邃忄 CD 眍耔蝈. 袜蜩耥弪錦n"
-"'悟赅骅', 玎 溧 镳钿骅蝈 桧耱嚯圉蜞 徨 蝈玷 眍耔蝈腓.\n"
-"\n"
-"\n"
-"觐 觐祜铐屙蜩 聱潸疰帙 皴 耠邃忄 CD 眍耔蝈 礤 襦 疣顼痤耱疣忄騖n"
-"镱 GPL 髓鲥礴 桦 镱漕徨 蜞犏. 埋尻 蜞犏 觐祜铐屙 镱 篑腩忤蜞\n"
-" 镱腩驽龛蜞 磬 耧弼梏梓龛 祗 腓鲥礴. 填, 镳铟弪弪 忭桁囹咫眍 桤腩\n"
-"蝈玷 耧弼梏梓龛 腓鲥礴 镳邃 溧 桤镱腌忄蝈 桦 疣顼痤耱疣忄蝈 "
-"耧铎屙囹栩錦n"
-"觐祜铐屙蜩.\n"
-"亦觇忄 腓鲥礴 镱 镳桧鲨 镳邃铗怵囹忄 镳屙铖, 觐镨疣礤蝾 (铖忮 鲥隲n"
-"聱躔囗屙桢), 疣顼痤耱疣忄礤蝾, 钺疣蝽 桧驽礤痂磴, 溴囫屐犭桊囗弪頫n"
-"溴觐祜桦圉蜞 桦 祛滂翳赅鲨蜞 磬 觐祜铐屙蜩蝈.\n"
-"埋觐 磬痼忄礤 磬 耧钽钿徉蜞 礤玎徉忭 镳弩耱囗钼忄 镳噔囹 忤 镱\n"
-"耧弼梏梓龛 腓鲥礴. 务忮 嚓 耧弼梏梓龛 腓鲥礴 忤 溧忄 蜞觇忄 镳噔,\n"
-"钺桕眍忮眍 礤 祛驽蝈 溧 桧耱嚯桊囹 镳钽疣扈蝈 磬 镱忮麇 铗 邃磬 耔耱屐郳n"
-"桦 溧 汨 镳桡噫溧蝈 玎 桤镱腌忄礤 祓彐. 狸 礤 耱 耔泱痦, 祛\n"
-"疋驽蝈 皴 滂耱痂狍鲨 桦 疱溧牝铕 磬 觐祜铐屙.\n"
-"橡艴恸痣礤蝾 磬 蝠弪 腓鲟 桦 觐镨疣礤蝾 磬 怦赅 觐祜铐屙蜞, 怅膻麒蝈腠頫n"
-"磬 漕牦戾眚圉蜞, 钺桕眍忮眍 襦 玎狃囗屙.\n"
-"\n"
-"\n"
-"埋梓觇 镳噔 磬 觐祜铐屙蜩蝈 铗 耠邃忄 CD 眍耔蝈 镳桧噤脲驵 磬\n"
-"聱铗忮蝽栩 桁 噔蝾痂 襦 玎蝈龛 赅蝾 桧蝈脲牝筻腠 耦狁蜮屙铖 铗\n"
-"玎觐龛蝈 玎 噔蝾瘃觇 镳噔 镳桦铈桁 玎 耦趄箦痦栩 镳钽疣扈.\n"
+msgid "Video mode"
+msgstr "妈溴 疱骅"
-#: ../../install_messages.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"满忮溴蝽桢\n"
-"\n"
-"物屦圉桀眄囹 耔耱屐 疣珉梓龛蝈 觐祜铐屙蜩 漕耱龛 Mandrake Linux "
-"滂耱痂狍鲨蜞 镱-漕塍  皴\n"
-"磬痂鬣 \"杨趄箦疱 橡钿箨蜩\". 杨趄箦痦栩 橡钿箨蜩 怅膻麾囹, 眍 礤 皴 "
-"钽疣龛鬣忄 襦祛 漕, 磬犷疣\n"
-"镳钽疣扈, 戾蝾滂, 镳噔桦 漕牦戾眚圉 铗磬 皴 漕 铒屦圉桀眄囹 "
-"耔耱屐 疣珉梓龛蝈\n"
-"觐祜铐屙蜩 磬 Mandrake Linux 滂耱痂狍鲨蜞.\n"
-"\n"
-"\n"
-"1. 髓鲥礴桀礤 漕泐忸餦n"
-"\n"
-"填, 镳铟弪弪 忭桁囹咫眍 蝾玷 漕牦戾眚. 翌玷 漕牦戾眚 腓鲥礴桀礤 "
-"漕泐忸 戾驿 忄 鑌n"
-"MandrakeSoft S.A., 觐轵 皴 铗磬 漕 杨趄箦痦 橡钿箨. 尊彗 "
-"桧耱嚯桊囗弪, 觐镨疣礤蝾\n"
-"桦 桤镱腌忄礤蝾 磬 杨趄箦痦 橡钿箨 镱 赅犏怛 溧 磬麒 忤 桤痂黜 "
-"镳桢爨蝈 鑌n"
-"磬嵇腠 皴 聱汶囫忄蝈 溧 耧噻忄蝈 耩铌钼弪 篑腩忤蜞 磬 蝾玷 髓鲥礴.\n"
-"狸 礤 皴 聱汶囫忄蝈 觐 鬣耱 磬 髓鲥礴, 爨蝈 镳噔 溧 桧耱嚯桊囹, "
-"觐镨疣蝈 桦鑌n"
-"桤镱腌忄蝈 杨趄箦痦 橡钿箨. 物栩栩 溧 皴 桧耱嚯桊, 觐镨疣 桦 桤镱腌忄 "
-"杨趄箦痦 橡钿箨騖n"
-"礤聱钺疣珥 聱 耩铌钼弪 篑腩忤蜞 磬 蝾玷 髓鲥礴 皴 玎狃囗忄 蜞觇忄 "
-"镳尻疣忄 镳噔囹郳n"
-"忤 镱 蝾玷 髓鲥礴. 橡 镳尻疣忄礤 磬 髓鲥礴, 蝠徕 礤玎徉忭 溧 "
-"箜桄蝾骅蝈 怦梓觇\n"
-"觐镨 磬 杨趄箦痦 腓鲥礴.\n"
-"\n"
-"\n"
-"2. 毋疣龛麇磬 汔疣眦\n"
-"\n"
-"杨趄箦痦栩 橡钿箨蜩 镳桦铈屙囹 漕牦戾眚圉 皴 镳邃铖蜞蜞 \"蜞觇忄 "
-"赅赈栩 襦\", 徨 汔疣眦,\n"
-" 疣礻栩 磬 疣琊屮屙铗 铗 玎觐磬.\n"
-"MandrakeSoft S.A., 镳 龛赅赈 钺耱蝈腭蜮 疣礻栩 磬 玎觐磬, 礤 "
-"铗泐忸痦 玎 赅赈栩 溧 e\n"
-"箪桫脲龛, 耠篦嚅龛, 镳尻 桦 觐耱忮龛 蜩 (怅膻麒蝈腠 玎泱徉 磬 溧眄 玎 "
-"疣犷蜞, 镳尻疣忄礤 磬,\n"
-"疣犷蜞, 翳磬眈钼 玎泱徼, 玎觐眄 溧睑鲨 磬赅玎龛 疱珞腧囹 磬 聱溴犴 "
-"疱龛 桦 赅赈囹 溧 錦n"
-"漯筱 镳铊珉桤帙 铗 蝾忄 玎泱徼) 镳铊珧梓帙 铗 箫铗疱徉蜞 桦 铗 "
-"礤恸珈铈眍耱蜞 溧 皴 箫铗疱徼\n"
-"杨趄箦痦 橡钿箨, 溧驽 嚓 MandrakeSoft S.A. 溧 桤忮耱桦 玎 "
-"恸珈铈眍耱蜞 桦 耠篦忄礤蝾 磬 蜞赅忄 玎泱徉.\n"
-"\n"
-"蚊欣腿着屠 我梦挛型窝 崖谛抢屠 闲纫牌缆劳乓 人 惹衔饲吕团椅 屠 抢列劳磐 "
-"盐砸优 瓦饰 岩欣腿\n"
-"\n"
-" 疣礻栩 磬 玎觐磬, MandrakeSoft S.A. 礤轫栩 滂耱痂狍蝾痂 爨 镳 "
-"龛赅赈 篑腩忤 溧 狷溧騖n"
-"铗泐忸痦 玎 赅赈栩 溧 徼腩 箪桫脲龛, 耠篦嚅龛, 镳尻 桦 觐疋屙 蜩 "
-"(怅膻麒蝈腠 玎泱徉 磬 溧眄鑌n"
-"玎 疣犷蜞, 镳尻疣忄礤 磬, 疣犷蜞, 翳磬眈钼 玎泱徼, 玎觐眄 溧睑鲨 "
-"磬赅玎龛 疱珞腧囹 磬\n"
-"聱溴犴 疱龛 桦 赅赈囹 溧 漯筱 镳铊珉桤帙 铗 蝾忄 玎泱徼) "
-"镳铊珧梓帙 铗 镳栩彐噔囗弪頫n"
-" 箫铗疱徉蜞 磬 耦趄箦痦 觐祜铐屙蜩 铗 桤蝈汶礤蝾 磬 耦趄箦痦 "
-"觐祜铐屙蜩 铗 襦轵钼弪 磬 Mandrake Linux,\n"
-"觐栩 襦 玎狃囗屙 觐 耱疣龛 铗 戾耱眍蝾 玎觐眍溧蝈腭蜮.\n"
-"亦玷 钽疣龛麇磬 铗泐忸痦铖 皴 铗磬 漕, 眍 礤 襦祛 玎, 祛栩 "
-"牮栾蝾沭圄耜 觐祜铐屙蜩 怅膻麇龛\n"
-" 杨趄箦痦 橡钿箨.\n"
-"\n"
-"\n"
-"3. GPL 髓鲥礴 镳桎痼驵忄 腓鲥礴鑌n"
-"\n"
-"杨趄箦痦 橡钿箨 皴 聱耱铊 铗 觐祜铐屙蜩 聱玟噤屙 铗 疣珉梓龛 躅疣 桦 "
-"铕汔龛玎鲨. 项忮麇蝾 铗\n"
-"蝈玷 觐祜铐屙蜩 皴 箫疣怆忄 铗 耩铌钼弪 篑腩忤蜞 磬 GNU 吾 象犭梓屙 "
-"髓鲥礴, 铗蝮 磬蜞蝥 磬痂鬣韁n"
-"\"GPL\", 桦 镱漕犴 礤祗 腓鲥礴. 项忮麇蝾 铗 蝈玷 腓鲥礴 忤 镱玮铍忄 溧 "
-"桤镱腌忄蝈, 觐镨疣蝈, 桦鑌n"
-"疱滂耱痂狍蜩疣蝈 觐祜铐屙蜩蝈, 觐栩 蝈 镱牮桠囹. 填, 镳铟弪弪 忭桁囹咫眍 "
-"耩铌钼弪 篑腩忤蜞 磬\n"
-"腓鲥礴桀眄 漕泐忸 磬 怦尻 觐祜铐屙 镳邃 溧 泐 桤镱腌忄蝈. 埋赅赈 "
-"恸镳铖 铗眍耥 腓鲥礴郳n"
-"磬 觐祜铐屙蜩蝈 徼 蝠徕嚯 溧 狷溧 磬耦麇龛 犏 聱铗忮蝽 桁 噔蝾, 礤 "
-"犏 MandrakeSoft.\n"
-"橡钽疣扈蝈 疣琊噌铗屙 铗 MandrakeSoft S.A. 皴 箫疣怆忄 铗 GPL 髓鲥礴. "
-"念牦戾眚圉蜞 磬镨襦磬\n"
-"铗 MandrakeSoft S.A. 皴 箫疣怆忄 铗 耧弼栲脲 腓鲥礴. 填, 镱汶邃礤蝈 "
-"漕牦戾眚圉蜞 玎\n"
-"镱忮麇 桧纛痨圉.\n"
-"\n"
-"\n"
-"4. 橡噔 玎 软蝈脲牝筻腠 杨狁蜮屙铖騖n"
-"\n"
-"埋梓觇 镳噔 犏 觐祜铐屙蜩蝈 磬 杨趄箦痦 橡钿箨 镳桧噤脲驵 磬 "
-"聱铗忮蝽栩 桁 噔蝾痂 襦\n"
-"玎蝈龛 铗 玎觐龛蝈 玎 桧蝈脲牝筻腠囹 耦狁蜮屙铖 玎 觐镨疣礤 镳桦嚆囗 "
-"玎 耦趄箦痦栩 镳钽疣扈.\n"
-"MandrakeSoft S.A. 玎镟玮 镳噔铗 耔 溧 祛滂翳鲨疣 镳桡钿忄 杨趄箦痦 "
-"橡钿箨, 赅蝾 腩 桦 磬\n"
-"鬣耱, 镱 怦赅犏 磬麒 怦赅赈 鲥腓.\n"
-"\"Mandrake\", \"Mandrake Linux\" 疋玎龛蝈 腩泐蜞 襦 玎镟珏磬 爨痍 磬 "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. 语疣怆忄 青觐龛\n"
-"\n"
-"狸 觐 鬣耱 铗 蝾玷 漕泐忸 皴 忸滂 玎狃囗屙, 礤脲汔腠 桦 礤镳桦铈桁 "
-"耧铕邃 疱龛 磬 聱,\n"
-"蜞玷 鬣耱 皴 桤觌忄 铗 漕泐忸疣. 妈 铖蜞忄蝈 钽疣龛麇龛 铗 铖蜞磬腓蝈 "
-"镳桦铈桁 皴牿梃 磬 漕泐忸疣.\n"
-"佯铌钼弪 篑腩忤蜞 磬 蝾玷 髓鲥礴 皴 箫疣怆忄 铗 青觐龛蝈 磬 责囗鲨.\n"
-"埋梓觇 耧铕钼 镱 篑腩忤蜞 磬 蝾玷 腓鲥 徼 徼腩 漕狃 溧 皴 铗礤襦 漕 "
-"聱溧. 枢蝾 牮嚅磬 痍,\n"
-"耧铕钼弪  狷溧 铗磬龛 漕 镱漉钿 镳噔龛 聱滂腓 磬 相痂 - "
-"责囗鲨.\n"
-"青 怦赅赈 恸镳铖 镱 蝾玷 漕牦戾眚, 祛, 疋驽蝈 皴 MandrakeSoft S.A.\n"
-"\n"
-"抢僚伺剖: 翌忄 狷脬囵耜 镳栳腓玷蝈脲 镳邂钿 磬 漕牦戾眚, 觐弪 "
-"铉磬鬣忄, 麇 蝾閈n"
-"忮痤蝽 礤 漕耱囹眍 蝾麇. 枢蝾 镱-漕耱钼屦屙 桤蝾黜桕 镱腌忄轵 "
-"礤泐忤 铕桡桧嚯 磬\n"
-"囗汶栝耜.\n"
+msgid "Please enter your email address below "
+msgstr "填, 恸忮溴蝈 漕塍 忄 噤疱 磬 烹. 镱"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "袜怆桤囔 弪囡 `%s'\n"
+msgid "Oman"
+msgstr "戊囗"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Help"
-msgstr "项祛"
+msgid "Network Monitoring"
+msgstr "填龛蝾痂磴 磬 祓彐囹"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "not configured"
-msgstr "礤 觐眙桡箴桊囗"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure"
-msgstr "袜耱痤赅"
+msgid "New size in MB: "
+msgstr "皖忄 泐脲扈磬 MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "泥 镳钿驵 腓 怦 镟 ?"
+msgid "Partition table type: %s\n"
+msgstr "诣 磬 蜞犭桷囹 腩忮: %s\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "项忤 皴 沭屮赅 镳 桧耱嚯桊囗 磬 镟赍蜩蝈:"
+msgid "Authentication Windows Domain"
+msgstr "蠕屙蜩翳赅鲨 磬 Windows 念戾轫"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "项忤 皴 沭屮赅 镳 镱瘊麾囗弪 磬 镟赍蜩蝈:"
+msgid "US keyboard"
+msgstr "US 觌噔栲蝮疣"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Buttons emulation"
+msgstr "褥栩圉 磬 狍蝾龛"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
+msgstr ", 祓彐钼 镳桧蝈 \"%s\", 镱痱 %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"鸯屙弪 CD-ROM !\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
"\n"
-"填, 耠铈弪 CD-ROM 铉嚆豚忮 \"%s\" 篑蝠铋耱忸蝾 磬蜩耥弪 Ok, 觐汔蝾 "
-"耱 泐蝾忤.\n"
-"狸 泐 爨蝈, 磬蜩耥弪 悟磬, 玎 溧 桤徨沩弪 桧耱嚯桊囗弪 铗 蝾玷 CD-"
-"ROM."
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Refuse"
-msgstr "悟赅骅"
+msgid "Sending Speed:"
+msgstr "殃铕铖 磬 桤镳帙囗:"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Accept"
-msgstr "橡桢扈"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing package %s"
-msgstr "软耱嚯桊囗 磬 镟赍蜞 %s"
+msgid "Mail alert configuration"
+msgstr "暑眙桡箴圉 玎 镱漯邃徉 磬 镱"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d 镟赍蜞"
+msgid "Tokelau"
+msgstr "翌赍豚"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bosnian"
+msgstr "令耥屙耜"
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "项漯钺眍耱"
+msgid "Release: "
+msgstr "填 桤鬣赅轵"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Details"
-msgstr "项漯钺眍耱"
+msgid "Connection speed"
+msgstr "殃铕铖 磬 怵赅蜞"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "填, 桤鬣赅轵, 镱溷铗礤 磬 桧耱嚯圉蜞"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "务蜞忄 怵屐 "
+msgid "Namibia"
+msgstr "袜扈徼"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Estimating"
-msgstr "橡羼蜞礤"
+msgid "Database Server"
+msgstr "漾疴 拎玷-溧眄"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "软耱嚯桊囔"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "如徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "湾 祛汔 溧 镳栳噔 犏 _纛痨囹桊囗_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "惕扈磬腠 桧耱嚯圉"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛, 眍 襦祛 XFree %"
+"s,\n"
+"我僚伺婆遗, 着 椅吕 攀严判忍磐依送 衔哪汹剖 涛婆 睦 抢寥 饰滔抟谛 "
+"氯.\n"
+"枢痱囹 忤 皴 镱滗驵 铗 XFree %s, 觐轵 祛驽 溧 桁 镱-漕狃 镱滗瘊骊 磬 "
+"2D."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Updating package selection"
-msgstr "吾眍忄礤 磬 桤犷疣 磬 镟赍蜩"
+msgid "Please wait, setting security options..."
+msgstr "填, 桤鬣赅轵, 篑蜞眍忄 铒鲨栩 镱 玎蜞..."
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "青疱滂/青镟玷 磬 滂耜弪"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "湾桤忮耱屙|CPH05X (bt878) [祉钽 镳铊玮钿栩咫鑍"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "<- Previous"
-msgstr "<- 橡邃桫屙"
+msgid "Launch the graphical environment when your system starts"
+msgstr "象耥 X-Window 耔耱屐囹 镳 耱囵蜩疣礤"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "软耱嚯桊嚅"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "项赅骅 噔蝾爨蜩黜 铗徨玎龛蝈 镟赍蜩"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "湾 祛驽蝈 溧 桤觌栩 蝾玷 镟赍. 翌 蝠徕 溧 狷溴 钺眍忮"
+msgid "Making printer port available for CUPS..."
+msgstr "橡噔 镱痱 磬 镳桧蝈疣 磬腓麇 玎 CUPS..."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Antigua and Barbuda"
+msgstr "理蜩泱 拎疳箐"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"翌玷 镟赍 蝠徕 溧 狷溴 钺眍忮韁n"
-"谚泱痦 腓 耱, 麇 桉赅蝈 溧 泐 桤觌栩 ?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "湾 祛驽蝈 溧 铖蜞忤蝈 蝾玷 镟赍 礤爨痍桊囗. 翌 忮麇 桧耱嚯桊囗"
+msgid "Spanish"
+msgstr "锐镟眈赅"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "翌忄 眢驽 镟赍, 礤 祛驽 溧 狷溴 礤爨痍桊囗"
+msgid "Start"
+msgstr "羊囵"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "湾 祛驽蝈 溧 铗徨脲驽蝈/溴铗徨脲驽蝈 蝾玷 镟赍"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "央邃龛蝈 镟赍蜩  狷溧 镳屐圊磬蜩"
+msgid "Configuring applications..."
+msgstr "袜耱痤殛 磬 镳桦铈屙..."
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "央邃龛蝈 镟赍蜩  狷溧 桧耱嚯桊囗"
+msgid "Normal modem connection"
+msgstr "吾桕眍忮磬 祛溴祉 怵赅"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "File Selection"
+msgstr "如犷 磬 羿殡"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"湾 祛驽蝈 溧 铖蜞忤蝈 镟赍蜞 礤爨痍桊囗, 玎蝾 爨蝈 耱 溧 泐 "
-"桧耱嚯桊囹"
+"暑 ISDN 磬耱痤殛 镳邃镱麒蜞蝈 ?\n"
+"\n"
+"* 羊囵囹 磬耱痤殛 桤镱腌忄 isdn4net. 漾潸疰 祛 桧耱痼戾眚鑌n"
+" 眍 赅镳桤磬 玎 磬耱痤殛 礤 耱囗溧痱磬.\n"
+"\n"
+"* 皖忄蜞 磬耱痤殛 镱-脲耥 玎 疣玑桊囗, 镱 耱囗溧痱磬,\n"
+" 眍 镱-爨腙 桧耱痼戾眚.\n"
+"\n"
+"橡屣铕忄戾 忤 铍尻铗屙囹 磬耱痤殛.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "锣骓铖: %s\n"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "妙脲扈磬: %d KB\n"
+msgid "Run config tool"
+msgstr "如嵇腠忄 桧耱痼戾眚 玎 觐眙桡箴桊囗"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "洛瘃: %s\n"
+msgid "Bootloader installation"
+msgstr "软耱嚯圉 磬 Bootloader"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "褥: %s\n"
+msgid "Root partition size in MB: "
+msgstr "妙脲扈磬 磬 root-豚 MB: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad package"
-msgstr "祟 镟赍"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "翌忄 眢驽 镟赍, 礤 祛驽 溧 狷溴 礤爨痍桊囗"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other"
-msgstr "酿筱"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "吾 泐脲扈磬: %d / %d MB"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) Domain Name Server (DNS), 觐轵 皴 桤镱腌忄 溧 镳邂礤\n"
+"桁弪 磬 躅耱 漕 IP 噤疱."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Next ->"
-msgstr "央邃忄 ->"
+msgid "Disconnect..."
+msgstr "悟恸痃忄礤 ..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "如徼疣礤 磬 镟赍蜩 邃桧 镱 邃桧"
+msgid "Saint Lucia"
+msgstr "燕眚 梭麒"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Package Group Selection"
-msgstr "如犷 磬 沭箫 镟赍蜩"
+msgid "Report"
+msgstr "朽镱痱"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"锣蜞 耔耱屐 爨腙 疱耋瘃. 填驽 溧 桁囹 镳钺脲扈 桧耱嚯桊囗弪頫n"
-"磬 Mandrake Linux. 狸 皴 镱忤 镳钺脲 铒栩嚅蝈 蝈犟蝾忄蜞 桧襦豚鲨. "
-"青鲥腧,\n"
-"磬蜩耥弪 'F1', 觐汔蝾 耱囵蜩疣蝈 铗 CDROM 恸忮溴蝈 '蝈'."
+msgid "Palau"
+msgstr "相豚"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "青镟玷 桤犷 磬 镟赍蜩"
+msgid "level"
+msgstr "龛忸"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Automated"
-msgstr "棱蝾爨蜩玷疣"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Replay"
-msgstr "项怛铕"
+msgid "Package Group Selection"
+msgstr "如犷 磬 沭箫 镟赍蜩"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"棱蝾爨蜩黜囹 桧耱嚯圉 祛驽 溧 狷溴 磬嵇腠 噔蝾爨蜩玷疣磬,\n"
-" 蜞犏 耠篦嚅  镳邂珏戾 蜮滂 忤 滂耜 !!!\n"
-"(蝾忄 玎 镳邃磬珥圜屙 玎 桧耱嚯桊囗 磬 漯筱 爨磬).\n"
-"\n"
-"填驽 徼 桉赅蝈 溧 镱怛铕栩 桧耱嚯圉蜞.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "项溷铗忤 滂耜弪 玎 噔蝾爨蜩黜 桧耱嚯圉"
+msgid "You can configure each parameter of the module here."
+msgstr "妈 祛驽 溧 觐眙桡箴桊囹 怦尻 镟疣戾蝥 磬 祛潴膪 蝮."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Reboot"
-msgstr "橡羼蜞痱桊"
+msgid "Choose the resolution and the color depth"
+msgstr "如徨疱蝈 疣玟咫栩咫磬 耧铖钺眍耱 潸脶铟桧 磬 鲡弪钼弪"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr "泥 耔祗腓疣 腓 蝠弪 狍蝾 ?"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"觐 弪囡 礤 襦 玎恸瘌屙.\n"
-"\n"
-"袜桉蜩磬 腓 桉赅蝈 溧 桤脲珏蝈 皴汔 ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Creating auto install floppy..."
+msgid "Mount"
+msgstr "填眚桊嚅"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Creating auto install floppy"
msgstr "项溷铗 滂耜弪 噔蝾爨蜩黜 桧耱嚯圉"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "软耱嚯桊囗 磬 耔耱屐囹"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "央铈弪 镳噻磬 滂耜弪 篑蝠铋耱忸 %s"
+msgid "text box height"
+msgstr "忤耦麒磬 磬 疣礻 玎 蝈犟"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"填驽 徼 皴 眢驿噱蝈 溧 镳铎屙栩 Open Firmware 耱囵蝾忸蝾 篑蝠铋耱忸,\n"
-" 玎 溧 矬耥弪 玎疱驿帙囹 镳钽疣爨. 狸 礤 忤驿囹 镱漶赅珀囹 镳鑌n"
-" 疱耱囵蜩疣礤, 玎漯蝈 Command-Option-O-F 镳 疱耱囵蜩疣礤 恸忮溴蝈:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" 央邃 觐弪 磬镨蝈: shut-down\n"
-"橡 耠邃忄蝾 疱耱囵蜩疣礤 徼 蝠徕嚯 溧 忤溴蝈 镱漶赅珀囹."
+msgid "State"
+msgstr "漾耱龛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "软耱嚯圉蜞 磬 bootloader 镳钼嚯屙. 项忤 皴 耠邃磬蜞 沭屮赅:"
+msgid "Be sure a media is present for the device %s"
+msgstr "橡钼屦弪 桁囹 腓 滂耜弪 篑蝠铋耱忸蝾 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "软耱嚯桊囗 磬 bootloader"
+msgid "Enable multiple profiles"
+msgstr "玛膻麾 祉钽 镳铘桦"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"灭屮赅 镳 桧耱嚯桊囗 磬 aboot, \n"
-"溧 皴 铒栩囔 腓 溧 镳钿驵 桧耱嚯圉蜞 漕痂, 嚓 蝾忄 箜桄蝾骅 嵇疴 ?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "锐赅蝈 腓 溧 桤镱腌忄蝈 aboot ?"
+msgid "Local printer"
+msgstr "祟赅脲 镳桧蝈"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Files Restored..."
msgstr ""
-"如汶彐溧 桁囹 耱囵钼疱祚赅 桦 礤桤忮耱磬\n"
-"爨磬, 磬 觐蝾 yaboot 爨 溧 镳铕噌铗.\n"
-"软耱嚯圉蜞  镳钿骅, 眍  蝠徕郳n"
-"溧 栾铍玮囹 BootX, 玎 溧 耱囵蜩疣蝈 爨磬蜞 耔"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "项溷铗钼赅 磬 bootloader"
+msgid "Package selection"
+msgstr "如犷 磬 镟赍蜩"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "相痤豚 玎 噤扈龛耱疣蝾 磬 漕戾轫"
+msgid "Mauritania"
+msgstr "锑怵栩囗"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "褥 磬 噤扈龛耱疣蝾 磬 漕戾轫"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows 漕戾轫"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"爨 磬戾疱 腩赅脲 镳桧蝈! 青 溧 桧耱嚯桊囹 瘊黜 镳桧蝈, 恸忮溴蝈 桁 "
+"磬 篑蝠铋耱忸/桁 磬 羿殡 恸 怩钿眍蝾 镱脲 (相疣脲腠 镱痱钼 /dev/lp0, /"
+"dev/lp1, ..., 聱铗忮蝰忄 磬 LPT1:, LPT2:, ..., 1-忤 USB 镳桧蝈: /dev/usb/"
+"lp0, 2-痂 USB 镳桧蝈: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "蠕屙蜩翳赅鲨 磬 Windows 念戾轫"
+msgid "All primary partitions are used"
+msgstr "埋梓觇 嵇疴梓龛 腩忮 皴 桤镱腌忄"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
+"央邃 赅蝾 耱囗 蝾忄, 镳屣铕忄戾 忤 溧 疱耱囵蜩疣蝈 X\n"
+"耩邃囹 耔, 玎 溧 桤徨沩弪 镳钺脲扈 聱 耢磬蜞 桁弪 磬 躅耱."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS 聱疴"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "棱蝾爨蜩黜 玎耔鬣礤 磬耱痤殛 磬 踵痄箦疣 镳 耱囵蜩疣礤."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS 漕戾轫"
+msgid "Installation Server Configuration"
+msgstr "暑眙桡箴桊囗 磬 软耱嚯圉桀礤 漾疴"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS 桎屙蜩翳赅鲨"
+msgid "Configuring IDE"
+msgstr "袜耱痤殛 磬 IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Network functionality not configured"
+msgstr "泽黻鲨铐嚯眍耱蜞 磬 祓彐囹 礤 磬耱痤屙"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP 聱疴"
+msgid "Configure module"
+msgstr "袜耱痤殛 磬 祛潴"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP 拎珙 dn"
+msgid "Cocos (Keeling) Islands"
+msgstr "暑觐耦忤 务蝠钼"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP 囿蝾痂玎鲨"
+msgid "Disconnecting from the Internet "
+msgstr "朽珀圜忄 铗 软蝈痦弪 "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "茵徕 溧 疱耱囵蜩疣蝈, 镳邃 镳铎屙栩 溧 怆玎 耔豚"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Local files"
-msgstr "祟赅腠 羿殡钼"
+msgid "Provider phone number"
+msgstr "义脲纛礤 眍戾 磬 漕耱噔麒赅"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Authentication"
-msgstr "蠕屙蜩翳赅鲨"
+msgid "Host %s"
+msgstr "疹耱 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "相痤豚蜞 镳尻嚯屙 镳铖蜞 (蝠徕 溧 狷溴 潸脬 镱礤 %d 耔焘铍)"
+msgid "Armenia"
+msgstr "鲤戾龛"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No password"
-msgstr "铃 镟痤豚"
+msgid "Fiji"
+msgstr "澡滏"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Set root password"
-msgstr "满忮溴蝈 镟痤豚 玎 root"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"鲤泱戾眚: (length, ndigits=0, nupper=0)\n"
+"\n"
+"青溧忄 玎 镟痤豚蜞 扈龛爨腠囹 潸腈桧, 扈龛爨脲 狃铋 鲨麴 扈龛爨脲 "
+"狃铋 汶噔龛 狍赈."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "妈 礤 耱 觐眙桡箴桊嚯 X. 谚泱痦 腓 耱, 麇 桉赅蝈 蝾忄?"
+msgid "Second floppy drive"
+msgstr "买铕 綦铒 篑蝠铋耱忸"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "玉塍汨: %d 嚓蜩忤疣龛 铗 %d 疱汨耱痂疣龛"
+msgid "About Harddrake"
+msgstr "悟眍耥 Harddrake"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Services"
-msgstr "玉塍汨"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "System"
-msgstr "谚耱屐"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "项痱"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"央铈弪 滂耜弪 恸 綦铒栩頫n"
+"埋梓觇 溧眄, 磬扈疣 皴 恸瘐 滂耜弪囹,  狷溧 玎泱徨龛"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
+msgid "Size: %s"
+msgstr "朽珈屦: %s"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "秒噔屙"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Control and Shift keys simultaneously"
+msgstr "Control Shift 觌噔桫 邃眍怵屐屙"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "桤觌"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "secondary"
+msgstr "怛铕"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "嚓蜩忤疣 皴汔"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Backup Configuration."
+msgstr "橡邈脲 磬 暑眙桡箴圉 玎 疱珏疴眍 觐镨."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "漾疴, Firewall/畜蝈"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "谚泱痦铖"
+msgid "No password"
+msgstr "铃 镟痤豚"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "丸忸 磬 耔泱痦铖"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nigeria"
+msgstr "丸沐痂"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Network"
-msgstr "甜彐"
+msgid "There is no existing partition to use"
+msgstr "爨 , 觐轵 祛汔 溧 桤镱腌忄"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "甜彐钼 桧蝈痿彘"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Graphical interface"
-msgstr "灭圄梓屙 桧蝈痿嚅"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "爨蝈 祓彐钼 噤囡蝈!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"青 溧 镥鬣蜞蝈 磬 socket 桦 TCP 镳桧蝈, 蝠徕 溧 镳邃铖蜞忤蝈 桁弪 磬 "
+"躅耱 磬 镳桧蝈疣 , 邂屙蝮嚯眍, 眍戾 磬 镱痱. 袜 HP JetDirect 聱疴, "
+"眍戾瘊 磬 镱痱 钺桕眍忮眄 9100, 磬 漯筱 聱疴 祛驽 溧 忄痂疣. 妈骝 "
+"瘊觐忸耱忸蝾 磬 踵痄箦疣 耔."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV 赅痱"
+msgid "Hard drive information"
+msgstr "软纛痨圉蜞 玎 蜮滂 滂耜"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "爨 铗牮栩 玮箨钼 赅痱. 物栩嚅蝈 \"harddrake\" 耠邃 桧耱嚯圉蜞"
+msgid "Russian"
+msgstr "畜耜"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "深痄囗"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"如嵇腠弪 \"sndconfig\" 耠邃 桧耱嚯圉 玎 溧 觐眙桡箴桊囹 忄蜞 玮箨钼 "
-"赅痱"
+msgid "Hide files"
+msgstr "殃痂 羿殡钼弪"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "褥囹 腓 ISA 玮箨钼 赅痱?"
+msgid "Auto-detect printers connected to this machine"
+msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈痂 疋玎龛 犏 蜞玷 爨磬"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Sound card"
-msgstr "氢箨钼 赅痱"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "悟溧脲麇 CUPS 聱疴"
+msgid "Sorry, no floppy drive available"
+msgstr "漾驵忄 爨 綦铒"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "爨 镳桧蝈"
+msgid "Bolivia"
+msgstr "令腓忤"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "橡桧蝈"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse"
-msgstr "惕"
+msgid "Bad package"
+msgstr "祟 镟赍"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Timezone"
-msgstr "奏耦忄 珙磬"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"橡邂瘊 忄蜞 爨磬 祛 Linux 聱疴 觐腙 鳅赈囗 磬 扈囹: "
+"Web 聱疴, 镱, firewall, router, 羿殡钼 镳桧 聱疴, ..."
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "孰噔栲蝮疣"
+msgid "DrakSec Basic Options"
+msgstr "务眍忭 铒鲨 磬 DrakSec "
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Summary"
-msgstr "吾钺龛"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP 聱疴"
+msgid "Romania"
+msgstr "畜禚龛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "棱蝾爨蜩黜 耔眭痤龛玎鲨 磬 怵屐弪 (桤镱腌忄 NTP)"
+msgid "choose device"
+msgstr "桤徼疣 篑蝠铋耱忸"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "锗漯箦痦 忤 鬣耦忭桕 磬耱痤屙 镱 GMT"
+msgid "Canada"
+msgstr "枢磬溧"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "暑 怵屐邂囹 忤 珙磬 ?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "锐赅蝈 腓 溧 磬耱痤栩 镥鬣蜞 ?"
+msgid "Remove from LVM"
+msgstr "橡屐圊龛 铗 LVM"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "湾 祛汔 溧 磬镳噔 'fork': %s"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Timezone"
+msgstr "奏耦忄 珙磬"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "砚玮囗 钽脲溧腠 聱疴 玎 镱塍鬣忄礤 磬 耧桉 镟赍蜩蝈"
+msgid "German"
+msgstr "湾祚赅"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "如徨疱蝈 钽脲溧脲 聱疴,铗 觐轵 溧 镱塍麒蝈 镟赍蜩蝈"
+msgid "Next ->"
+msgstr "央邃忄 ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"砚玮囗 Mandrake Linux web 襦轵 玎 镱塍鬣忄礤 磬 耧桉 磬腓黜 "
-"钽脲溧腠 聱疴..."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
+"\n"
+"洛痤蝽 蝾玷 溧 錦n"
+"酿嚅忮-, 祛驽 徼 蝠徕郳n"
+"蝠徕 溧 泐 铖蜞忤蝈.\n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "央铈弪 滂耜弪 玎 钺眍忄礤 磬 祛潴腓 篑蝠铋耱忸 %s"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "央铈弪 耱囵蜩疣蜞 滂耜弪 篑蝠铋耱忸 %s"
+msgid "Guinea-Bissau"
+msgstr "免桧-凌襦"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "央邃 桧耱嚯圉桀眄 磬耱痤殛"
+msgid "Horizontal refresh rate"
+msgstr "疹痂珙眚嚯磬 耜铕铖 磬 恸珩蜞眍忄礤"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"软耱嚯桊囔 镟赍 %s\n"
-"%d%%"
+"湾 祛汔 溧 爨蹴 蝾麝囹 磬 祛眚桊囗, 蝥 赅蝾 膪 皴 桤镱腌忄 玎 "
+"loopback.\n"
+"销疴 爨蹴弪 loopback"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "项溷铗 桧耱嚯圉蜞"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM 铉嚆豚忮 \"%s\""
+msgid "USB controllers"
+msgstr "USB 觐眚痤脲痂"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"狸 桁囹 怦梓觇 CD-蜞 铗 耧桉 镱-泐疱, 磬蜩耥弪 Ok.\n"
-"狸 爨蝈 龛蝾 邃眍 铗 蝈玷 CD-蜞, 磬蜩耥弪 悟磬.\n"
-"狸 忤 腓锺忄 觐 CD-蜞, 爨蹴弪 汨, 磬蜩耥弪 Ok. "
+msgid "What norm is your TV using?"
+msgstr "枢犏 蜩嵇 磬 桤镱腌忄龛 TV ?"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "All"
-msgstr "埋梓觇"
+msgid "Type:"
+msgstr "诣: "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "袜桉蜩磬 扈龛爨腠 桧耱嚯圉 (铖钺屙眍 徨 urpmi)"
+msgid "Share name"
+msgstr "吾 桁"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr " 徉珙忄 漕牦戾眚圉 (镳屣铕忄 皴!)"
+msgid "enable"
+msgstr "怅膻麒"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr " X"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"砚玮囗 Mandrake Linux web 襦轵 玎 镱塍鬣忄礤 磬 耧桉 磬腓黜 "
+"钽脲溧腠 聱疴..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
-"妈 礤 耱 桤狃嚯 龛赅赈 沭箫 铗 镟赍蜩.\n"
-"填, 桤徨疱蝈 扈龛爨腠囹 桧耱嚯圉 觐蜩 桉赅蝈:"
+"如龛觏 镳钺脲 镳 疱耱囵蜩疣礤蝾 磬 祓彐囹:\n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Type of install"
-msgstr "诣 桧耱嚯圉"
+msgid "Remove the loopback file?"
+msgstr "泥 镳屐圊磬 腓 loopback 羿殡 ?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "如狃囗囹 泐脲扈磬 镱-泐爨 铗 漕耱眍蝾 镳铖蝠囗耱忸"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "央铈弪 滂耜弪 聱潸疰帙 桤犷 磬 镟赍蜩"
+msgid "NCP server name missing!"
+msgstr "髓锺忄 桁 磬 NCP 聱疴 !"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "青疱驿囗 铗 滂耜弪"
+msgid "Please choose your country."
+msgstr "填, 桤徨疱蝈 忄蜞 耱疣磬."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package selection"
-msgstr "如犷 磬 镟赍蜩"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "祟 backup-羿殡"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "青镟玷 磬 滂耜弪"
+msgid "Laotian"
+msgstr "肃铖赅"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "青疱滂 铗 滂耜弪"
+msgid "Samoa"
+msgstr "燕祛"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-"填驽 桤徨疱蝈 玎疱驿囗 桦 玎镨 磬 桤犷疣 磬 镟赍蜩 磬 綦铒.\n"
-"灶痨囹 聱 赅蝾 auto_install 沐礤痂疣龛蝈 滂耜弪."
+"rstat 镳铗铌铍 镱玮铍忄 磬 祓彐钼栩 镱蝠遽栩咫 溧 桤怆梓囹\n"
+"镟疣戾蝠栩 磬 恸珈铈眍耱栩 玎 怦赅 爨磬 磬 祓彐囹."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-"谚耱屐囹 忤 爨 漕耱囹眍 耱 玎 桧耱嚯圉 桦 钺眍忄礤 (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "寅瘃 磬腓黜 镟赍蜩..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "寅瘃 镟赍蜩 玎 钺眍忄礤"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "寅瘃 恸 忮麇 桧耱嚯桊囗栩 镟赍蜩..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "寅瘃 磬腓黜 镟赍蜩 镳屣铖蝠忄 rpm 徉玎蜞 溧眄..."
+msgid "Scanner"
+msgstr "殃屙屦"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
-"爨 漕耱囹眍 swap 玎 镳桕膻麾囗 磬 桧耱嚯圉蜞, 祛 漕徉忮蝈 爨腙"
+"马桁囗桢: 蝈耱忄礤蝾 磬 蜞玷 沭圄梓磬 赅痱 祛驽 溧 玎祓噻 觐祜 忤"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
-"湾篑镥 镳钼屦赅 磬 羿殡忄 耔耱屐 %s. 锐赅蝈 腓 溧 铒疣忤蝈 沭屮觇蝈? "
-"(狷溴蝈 忭桁囹咫龛, 祛驽 溧 玎泱徼蝈 溧眄)"
+"项蝠遽栩咫耜铗 桁 祛驽 溧 怅膻麾 襦祛 爨腙 狍赈, 眍戾疣, `-' `_'"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "橡钼屦赅 玎 腩 皴牝铕 ?"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "如徨疱蝈 腩忮蝈, 觐栩 桉赅蝈 溧 纛痨囹桊囹"
+msgid "Welcome To Crackers"
+msgstr "念狃 漕 镳 Cracker-栩"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "袜豚汔 皴 疣 疱耱囵蜩疣蝈, 镳邃 祛滂翳赅鲨栩 溧 镳邃桤忤赅 弭尻"
+msgid "Module options:"
+msgstr "物鲨 磬 祛潴豚:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-"爨 疋钺钿眍 耱 玎 1 塘 耱囵蜩疣 镱脲 ! 软耱嚯圉蜞  镳钿骅, 眍, "
-"玎 溧 耱囵蜩疣蝈 耔耱屐囹 耔,  蝠徕 溧 聱玟噤弪 耱囵蜩疣 镱脲 "
-"DiskDrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "如徨疱蝈 戾耱 玎 祛眚桊囗"
+msgid "Go on without configuring the network"
+msgstr "橡钿骅 徨 磬耱铋赅 磬 祓彐囹"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "橡弪疋囗 磬 腩忮蝈 玎 磬扈疣礤 磬 蝾麝 磬 祛眚桊囗"
+msgid "Abort"
+msgstr "悟赅"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No partition available"
-msgstr "爨 腩忮 磬 疣顼铍铈屙桢"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "袜耱痤殛 磬 IDE"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "填, 镳钼屦弪 溧腓 桉牝 溧 桤镱脞囹 礤镳屙噔桠帏 皴 篑蝠铋耱忸."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "如镱腌忄 疋钺钿眍蝾 耱"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "袜耱痤殛 磬 PCMCIA 赅痱栩 ..."
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"锣 Windows 祉钽 麴嚆戾眚桊囗, 祛 嵇疴 耱囵蜩疣轵 ''defrag''"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "褥栩圉 磬 3 狍蝾磬"
+msgid "Dvorak (Norwegian)"
+msgstr "拟铕嚓 (皖疴彐赅)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "褥栩圉 磬 2 狍蝾磬"
+msgid "Hard Disk Backup Progress..."
+msgstr "橡钽疱 玎 疱珏疴眍 觐镨 磬 蜮 滂耜..."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Buttons emulation"
-msgstr "褥栩圉 磬 狍蝾龛"
+msgid "Unable to fork: %s"
+msgstr "湾 祛汔 溧 磬镳噔 'fork': %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "填, 桤徨疱蝈 犏 觐 皴痂屙 镱痱 疋玎磬 扈囹 忤."
+msgid "Type: "
+msgstr "妈: "
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mouse Port"
-msgstr "项痱 磬 扈囹"
+msgid "<-- Edit Client"
+msgstr "<-- 绣溧牝桊 觌桢眚"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "填, 桤徨疱蝈 蜩 磬 扈囹."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "孰 玎 牮栾蜩疣礤"
+msgid "no fonts found"
+msgstr "爨 磬戾疱龛 梏蝾忮"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "吾眍忄 %s"
+msgid "Mouse"
+msgstr "惕"
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "翌忄 眍忄 桧耱嚯圉 腓 桦 钺眍忄礤 ?"
+msgid "not enough room in /boot"
+msgstr "爨 漕耱囹眍 耱 玎 /boot"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "软耱嚯桊嚅/吾眍忤"
+msgid "Choosing an arbitratry driver"
+msgstr "如犷 磬 耠篦噱 漯嚅忮"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "膨 嵇脲 耧桉 磬 漕耱瘊镯栩 觌噔栲蝮痂"
+msgid "Host name"
+msgstr "褥 磬 躅耱:"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "填, 桤徨疱蝈 镱漯彐溧礤 磬 觌噔栲蝮疣蜞."
+msgid "Liechtenstein"
+msgstr "髓躜屙轫"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Quit"
-msgstr "如躅"
+msgid "the color of the progress bar"
+msgstr "鲡弪 磬 脲眚囹 玎 镳钽疱"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "License agreement"
-msgstr "髓鲥礴桀礤 漕泐忸"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "项忤 皴 沭屮赅"
+msgid "Add to RAID"
+msgstr "橡栳噔 犏 RAID"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-" <Tab>/<Alt-Tab> 戾驿 咫屐屙蜩蝈 | <Space> 桤徼疣 | <F12> 耠邃忄 尻疣"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "软耱嚯圉 磬 Mandrake Linux %s"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "爨 綦铒 篑蝠铋耱忸"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"橡桧蝈瘊 \"%s\" 徼 篑镥 漕徉忮 犏 Star Office/OpenOffice.org/GIMP."
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Welcome to %s"
-msgstr "念狃 漕 %s"
+msgid "No floppy drive available!"
+msgstr "爨 綦铒 篑蝠铋耱忸!"
-#: ../../install_steps.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"觐 忄骓 镟赍蜩 礤 皴 桧耱嚯桊圊 赅牝 蝠徕.\n"
-"入 CDROM 篑蝠铋耱忸蝾 忤 桦 觐祜嚓 滂耜 忤 溴翦牝屙.\n"
-"橡钼屦弪 觐祜嚓 滂耜 磬 桧耱嚯桊囗 觐祜 桤镱腌忄殛 \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
+"青 溧 忤滂蝈 耧桉 磬 漕耱龛蝈 铒鲨 玎 蝈牦 镳桧蝈, 桦 镳铟弪弪 "
+"耧桉 镱赅玎 镱-漕塍 桦 鳅觏弪 磬 狍蝾磬 \"扬桉 铒鲨 玎 镥鬣騖".%s%"
+"s\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "捏犭桊嚅 蝾麝囹 磬 祛眚桊囗 %s"
+msgid "Continue anyway?"
+msgstr "橡钿驽龛 恸镳尻 怦梓觐 ?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"项忤 皴 沭屮赅, 眍 礤 珥囔 赅 溧 皴 耧疣 礤 溴腓赅蝽.\n"
-"填驽蝈 溧 镳钿骅蝈 磬 疋铋 痂耜."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr "狸 忄 镳桧蝈 礤 耧桉, 桤徨疱蝈 聱忪羼蜩 桦 镱漕徨."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "填 桤鬣赅轵"
+msgid "Printer"
+msgstr "橡桧蝈"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Ok"
+msgid "Saudi Arabia"
+msgstr "燕箐栩耜 鲤噌"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Finish"
-msgstr "青恸瘌"
+msgid "Internet"
+msgstr "软蝈痦弪"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
-msgstr "拎珙"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "袜镳邃龛鬣"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "缅铎弪痂: %s 鲨腓礓痂, %s 汶噔, %s 皴牝铕鑌n"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove"
-msgstr "橡屐圊忄"
+msgid "Printing on the printer \"%s\""
+msgstr "襄鬣蜞礤 磬 镳桧蝈 \"%s\""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify"
-msgstr "填滂翳鲨疣"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"/etc/hosts.allow /etc/hosts.deny 忮麇 襦 觐眙桡箴桊囗 - 礤 襦 镳铎屙屙"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add"
-msgstr "念徉"
+msgid "Restore From Tape"
+msgstr "满珩蜞眍忄 铗 脲眚"
-#: ../../interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "如徨疱蝈 羿殡"
+msgid "Choose the profile to configure"
+msgstr "如徨疱蝈 镳铘桦 玎 磬耱痤殛"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-"殷 祛驽 溧 桤徨疱蝈 觌噔桫 桦 觌噔桫磬 觐灬桧圉, 觐蝾 \n"
-" 忤 镱玮铍 溧 桤徼疣蝈 疣珉梓龛 觌噔栲蝮痦 镱漯邃徼\n"
-"(磬镳. latin 礤 latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "腻皴 \"Windows\" 觌噔桫"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr " \"Windows\" 觌噔桫"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" 觌噔桫"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "袜耱痤殛 磬 祓彐囹"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt Shift 觌噔桫 邃眍怵屐屙眍"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "翌麝栩 玎 祛眚桊囗 蝠徕 溧 聱潸疰囹 襦祛 狍赈 鲨麴"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl Alt 觌噔桫 邃眍怵屐屙眍"
+msgid "Restarting printing system..."
+msgstr "绣耱囵蜩疣礤 磬 镳桧蝈痦囹 耔耱屐"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock 觌噔桫"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control Shift 觌噔桫 邃眍怵屐屙"
+msgid "See hardware info"
+msgstr "妈 踵痄箦痦囹 桧纛痨圉"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "拟囹 Shift 觌噔桫 邃眍怵屐屙眍"
+msgid "First sector of boot partition"
+msgstr "销疴 皴牝铕 铗 耱囵蜩疣 皴 "
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "腻皴 Alt 觌噔桫"
+msgid "Printer manufacturer, model"
+msgstr "橡铊玮钿栩咫 磬 镳桧蝈疣, 祛溴"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "捭铖豚怦赅 (豚蜩龛鲟)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - 襄鬣蜞, 铃 物帏赅"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "妈弪磬祚赅 \"麒耠钼 疱滂鲟\" QWERTY"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US 觌噔栲蝮疣 (戾驿箜囵钿磬)"
+msgid "Subnet Mask:"
+msgstr "锑耜 磬 镱潇疱驵:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "US keyboard"
-msgstr "US 觌噔栲蝮疣"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo Bootsplash 蝈扈 襦 篑镥 桧耱嚯桊囗"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "U 觌噔栲蝮疣"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"拟囹 牮栩梓龛 镟疣戾蝥疣 襦 忮痱桕嚯磬蜞 耜铕铖 磬 恸珩蜞眍忄礤, 觐蝾 "
+"铗疣忄 耜铕铖蝌, \n"
+" 觐蝾 鲥腓 尻疣 皴 恸珩蜞眍忄, 磬-忄骓铗 - 躅痂珙眚嚯磬蜞\n"
+"耔眭痤龛玎鲨铐磬 耜铕铖, 觐蝾 铗疣忄 耜铕铖蝌, 觐蝾 皴 桤镨疋囹 "
+"躅痂珙眚嚯龛蝈 腓龛.\n"
+"\n"
+"掏蚊 吕仆 溧 桤徨疱蝈 蜞赅忄 耔眭痤龛玎鲨铐磬蜞 耜铕铖, 觐蝾 溧 "
+"铗泐忄 磬 恸珈铈眍耱栩 磬 锣 祛龛蝾 - 镳铗桠屙 耠篦嚅 祛驽蝈 溧 "
+"镱怵邃栩 祛龛蝾疣 耔.\n"
+" 狸 桁囹 赅赈 聱祉屙, 桤徨疱蝈 觐眈屦忄蜩忭 磬耱痤殛."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "雨疣桧耜"
+msgid "Modify"
+msgstr "填滂翳鲨疣"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "殷瘃赅 (祛溴疱 \"Q\" 祛溴)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"暑爨礓栩 \"%s\" \"%s\" 聱 蜞赅 镱玮铍忄 溧 镱镳噔蝈 桤狃囗栩 "
+"磬耱痤殛 玎 铒疱溴脲磬 疣犷蜞 磬 镳桧蝈疣. 橡铖蝾 漕徉忮蝈 桉赅龛蝈 "
+"磬耱痤殛 犏 觐爨礓龛 疱, 磬镳. \"%s <file>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "殷瘃赅 (蝠噤桷桀礤 \"F\" 祛溴)"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "亦滏桕桉蜞眈赅 觌噔栲蝮疣"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Thai keyboard"
-msgstr "亦殁囗耜 觌噔栲蝮疣"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "亦扈腭赅 (镨 爨磬)"
+msgid "new"
+msgstr "眍"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "亦扈腭赅 (ISCII-镱漯邃徉)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "锐赅蝈 腓 溧 磬耱痤栩 镥鬣蜞 ?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "佯耜 (觇痂腓鲟)"
+msgid "Wizard"
+msgstr "锑泓铖龛"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "央钼帏赅 (QWERTY)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "玎皴麇磬 %s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "央钼帏赅 (QWERTZ)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "填, 桤徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "央钼屙耜"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "袜豚汔 皴 疣 疱耱囵蜩疣蝈, 镳邃 祛滂翳赅鲨栩 溧 镳邃桤忤赅 弭尻"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swedish"
-msgstr "剽邃耜"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "畜耜 (Yawerty)"
+msgid "Please, choose your keyboard layout."
+msgstr "填, 桤徨疱蝈 镱漯彐溧礤 磬 觌噔栲蝮疣蜞."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Russian"
-msgstr "畜耜"
+msgid "Standard"
+msgstr "羊囗溧痱磬"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "畜禚眈赅 (qwerty)"
+msgid "Please choose your mouse type."
+msgstr "填, 桤徨疱蝈 蜩 磬 扈囹."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "畜禚眈赅 (qwertz)"
+msgid "Connect..."
+msgstr "砚玮囗 ..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "枢磬漶赅 (殊遽尻)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "屯弩耧屮磬 磬耱痤殛 磬 镳桧蝈 \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "项痱筱嚯耜"
+msgid "not configured"
+msgstr "礤 觐眙桡箴桊囗"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "项腭赅 (QWERTZ 磬疱溽)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "项腭赅 (QWERTY 磬疱溽)"
+msgid "About"
+msgstr "悟眍耥"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "皖疴彐赅"
+msgid "Proxies configuration"
+msgstr "袜耱痤殛 磬 proxy"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Dutch"
-msgstr "疹豚礓耜"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "锑腧栝耜 (US)"
+msgid "Start: sector %s\n"
+msgstr "袜鬣腩: 皴牝铕 %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "锑腧栝耜 (UK)"
+msgid "Network interface already configured"
+msgstr "甜彐钼 桧蝈痿彘 忮麇 觐眙桡箴桊囗"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "填磴铍耜 (觇痂腓鲟)"
+msgid "Couldn't access the floppy!"
+msgstr "爨 漕耱 漕 綦铒!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "锑轫爨 (徼痨囗耜)"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "锑赍漕眈赅"
+msgid "Mail Server"
+msgstr "项眈觇 聱疴"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "锑豚殡囔"
+msgid "Please click on a partition"
+msgstr "填, 鳅觏弪 磬 豚"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Latvian"
-msgstr "肃蜮栝耜"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "髓蜮栝耜 \"纛礤蜩麇韁" QWERTY"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "髓蜮栝耜 \"麒耠钼 疱滂鲟\" QWERTY"
+msgid "across Network"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "髓蜮栝耜 AZERTY (眍忄)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "髓蜮栝耜 AZERTY (耱囵)"
+msgid "Upgrade %s"
+msgstr "吾眍忄 %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "肃铖赅"
+msgid "Select Printer Connection"
+msgstr "如徨疱蝈 怵赅 犏 镳桧蝈疣"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Latin American"
-msgstr "肃蜩眍囔屦桕囗耜"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Korean keyboard"
-msgstr "暑疱轳赅 觌噔栲蝮疣"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "唢铐耜 106 觌噔桫"
+msgid "IP Range Start:"
+msgstr "袜鬣腩 磬 IP 钺踱囹:"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr "软箨蜩蝮"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (麇耱 磬痂鬣 inetd) 矬耜 疣珉梓龛 漯筱鑌n"
+"软蝈痦弪 篑塍汨. 翌 铗泐忄 玎 矬耜囗弪 磬 祉钽 篑塍汨 铗 痤溧 磬\n"
+"telnet, ftp, rsh rlogin. 如觌忄礤蝾 磬 inetd 桤觌忄 怦梓觇 篑塍汨,\n"
+"玎 觐栩 铗泐忄."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Italian"
-msgstr "闰嚯栲眈赅"
+msgid "the height of the progress bar"
+msgstr "忤耦麒磬蜞 磬 脲眚囹 玎 镳钽疱"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icelandic"
-msgstr "锐豚礓耜"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Iranian"
-msgstr "瑞囗耜"
+msgid "Argentina"
+msgstr "鲤驽眚桧"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "如疣咫耜 (纛礤蜩黜)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"项玮铍忄/青狃囗忄 broadcasted icmp echo."
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Israeli"
-msgstr "如疣咫耜"
+msgid "Domain Name Server"
+msgstr "Domain Name Server"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Croatian"
-msgstr "怔疴囹耜"
+msgid "Security Level:"
+msgstr "丸忸 磬 耔泱痦铖:"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "禹汔瘃赅"
+msgid "Mount points must begin with a leading /"
+msgstr "翌麝栩 磬 祛眚桊囗 蝠徕 溧 玎镱麾囹 /"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Gurmukhi"
-msgstr "皿痨箨麒"
+msgid "Postfix Mail Server"
+msgstr "Postfix 项眈觇 聱疴"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "皿噤驵疣蜩"
+msgid "Quit without saving"
+msgstr "如躅 徨 玎镨"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Greek"
-msgstr "灭赅"
+msgid "Yemen"
+msgstr "慑戾"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "灭箸桧耜 (\"肃蜩眈赅\" 磬疱溽)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "翌玷 镳钿箨 漕耱屙 铗 web 襦轵 磬 MandrakeStore"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "灭箸桧耜 (\"畜耜郳" 磬疱溽)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"填, 恸忮溴蝈 爨犟桁嚯龛 疣珈屦\n"
+" 镱玮铍屙 玎 Drakbackup"
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "French"
-msgstr "责屙耜"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> 褥 祉钽 礤 玎 桤犷 铗 (%s).\n"
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Finnish"
-msgstr "澡黼囗漶赅"
+msgid "Hard drive detection"
+msgstr "青耔鬣礤 磬 滂耜钼弪"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "锐镟眈赅"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"妈 礤 耱 桤狃嚯 龛赅赈 沭箫 铗 镟赍蜩.\n"
+"填, 桤徨疱蝈 扈龛爨腠囹 桧耱嚯圉 觐蜩 桉赅蝈:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Estonian"
-msgstr "篷蝾眈赅"
+msgid "Please enter the WebDAV server URL"
+msgstr "填 恸忮溴蝈 WebDAV 聱疴 URL"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "拟铕嚓 (剽邃耜)"
+msgid "Tajikistan"
+msgstr "亦滏桕桉蜞"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "拟铕嚓 (皖疴彐赅)"
+msgid "Accept"
+msgstr "橡桢扈"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "拟铕嚓 (US)"
+msgid "Description"
+msgstr "物桉囗桢"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Danish"
-msgstr "泥蝰赅"
+msgid "Error opening %s for writing: %s"
+msgstr "灭屮赅 镳 铗忄礤 磬 %s 玎 玎镨: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "泥忮磬滏囵"
+msgid "Mouse type: %s\n"
+msgstr "诣 扈: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "湾祚赅 (徨 礤疣犷蝈 觌噔桫)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛 XFree %s."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "German"
-msgstr "湾祚赅"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "填, 桤徨疱蝈 疣珈屦 磬 忄蝾 CD/DVD (Mb)"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "族 (QWERTY)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "族 (QWERTZ)"
+msgid "Expert Area"
+msgstr "念嵇腠栩咫龛"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "剽彘鲟瘃赅 (麴屙耜 磬疱溽)"
+msgid "Choose a monitor"
+msgstr "如徨疱蝈 祛龛蝾"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "剽彘鲟瘃赅 (礤祚赅 磬疱溽)"
+msgid "Empty label not allowed"
+msgstr "橡噻屙 弪桕弪 礤 疣琊屮屙"
#: ../../keyboard.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "铃豚痼耜"
+msgid "Maltese (UK)"
+msgstr "锑腧栝耜 (UK)"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "令耥屙耜"
+msgid "I can't add any more partition"
+msgstr "湾 祛汔 溧 漕徉 镱忮麇 腩忮"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "琉噻桦耜 (ABNT-2)"
+msgid "Size in MB: "
+msgstr "妙脲扈磬 MB: "
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "龙脬囵耜 (BDS)"
+msgid "Remote printer"
+msgstr "悟溧脲麇 镳桧蝈"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "龙脬囵耜 (纛礤蜩麇)"
+msgid "Please choose a language to use."
+msgstr "填, 桤徨疱蝈 彗桕 玎 桤镱腌忄礤."
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Bengali"
-msgstr "铃磴嚯耜"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"峦忍劳扰: 翌忄 篑蝠铋耱忸 忮麇 磬耱痤屙 溧 皴 疋玮 犏 软蝈痦弪.\n"
+"橡铖蝾 镳桢戾蝈, 玎 溧 铖蜞忤蝈 篑蝠铋耱忸蝾 磬耱痤屙.\n"
+"项镳噔赅蜞 磬 镱脲蜞蜞 镱-漕塍  镳彗囡桫 蜞玷 磬耱痤殛."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belgian"
-msgstr "铃脬栝耜"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"填汔 溧 磬耱痤 觐祜 忤 玎 怆桤囗 耔耱屐囹 噔蝾爨蜩黜 赅蝾 觐 "
+"镱蝠遽栩咫."
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "犁屦徉殇驵眈赅 (豚蜩龛鲟)"
+msgid "Floppy format"
+msgstr "灶痨囹桊 綦铒"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Arabic"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "鲤戾眈赅 (纛礤蜩麇)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "橡桧蝈"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "鲤戾眈赅 (镨 爨磬)"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Armenian (old)"
-msgstr "鲤戾眈赅 (耱囵)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Albanian"
-msgstr "离徉眈赅"
+msgid "First sector of the root partition"
+msgstr "销疴 皴牝铕 铗 耱囵蜩疣 皴 "
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Polish"
-msgstr "项腭赅"
+msgid "Alternative drivers"
+msgstr "离蝈痦囹桠龛 漯嚅忮痂"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "拟铕嚓"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "氰灬噌忮"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Zambia"
-msgstr "青灬"
+msgid "Cape Verde"
+msgstr "枢镱 洛痄"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
-msgstr "捩磬 吏痂赅"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Serbia"
-msgstr "佯"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "锑轭"
+msgid "Guam"
+msgstr "皿囔"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "慑戾"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"填, 桤徨疱蝈 镱痱 磬 觐轵 忄 镳桧蝈 玎赅麇 桦 恸忮溴蝈 桁 磬 "
+"篑蝠铋耱忸/桁 磬 羿殡 恸 怩钿眍蝾 镱脲"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Samoa"
-msgstr "燕祛"
+msgid "/Options/Test"
+msgstr "/物鲨/义耱"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "宇腓 泽蝮磬 务蝠钼"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"翌忄 龛忸 皴 桤镱腌忄 忭桁囗桢. 翌忄 赅疣 耔耱屐囹 忤 镱-脲耥 玎\n"
+"箫铗疱徉, 眍 镱-黧怦蜮栩咫眍: 礤 蝠徕 溧 狷溴 桤镱腌忄磬 磬 爨龛\n"
+"疋玎龛 漯筱 桦 镱 软蝈痦弪. 爨 漕耱 镟痤腓."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "锣眢囹"
+msgid "Mounting partition %s"
+msgstr "灶痨囹桊 %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "妈弪磬"
+msgid "User name"
+msgstr "项蝠遽栩咫耜 桁"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "妈痄骅眈觇 务蝠钼 (牙)"
+msgid "New configuration (isdn-light)"
+msgstr "皖忄 磬耱痤殛 (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "妈痄骅眈觇 务蝠钼 (琉栩囗耜)"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "洛礤鲶咫"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "暑 桉赅蝈 溧 桤镱腌忄蝈 玎 Linux4Win ?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "砚弪 妈眈屙 灭屙噤桧"
+msgid "Backup system"
+msgstr "谚耱屐 玎 聱躔囗屙桢"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vatican"
-msgstr "锣蜩赅磬"
+msgid "Test pages"
+msgstr "义耱钼 耱疣龛鲨"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "隅徨觇耱囗"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "羽筱忄"
+msgid "Checking %s"
+msgstr "橡钼屦赅 磬 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "锑腙 务蝠钼 镱 牮嚅狃彐桢蝾 磬 牙"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket 物鲨 磬 镳桧蝈"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Uganda"
-msgstr "鱼囗溧"
+msgid "Card mem (DMA)"
+msgstr "相戾 (DMA) 磬 赅痱囹"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "雨疣轫"
+msgid "France"
+msgstr "责囗鲨"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tanzania"
-msgstr "亦礴囗"
+msgid "browse"
+msgstr "镳邈脲"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Taiwan"
-msgstr "亦殁囗"
+msgid "Checking installed software..."
+msgstr "橡钼屦赅 磬 桧耱嚯桊囗 耦趄箦..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "殷忄塍"
+msgid "Remote printer name missing!"
+msgstr "髓锺忄 桁 磬 铗溧脲麇 镳桧蝈 !"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "茵桧桎噤 翌徉泐"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "锐赅蝈 腓 溧 疣琊屮栩 镥鬣 磬 镳桧蝈痂蝈 腩赅腠囹 祓彐?\n"
#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "殷瘀"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "翌磴"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr "殷龛"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr "殷痍戾龛耱囗"
-
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "East Timor"
-msgstr "如蝾麇 诣祛"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Tokelau"
-msgstr "翌赍豚"
+msgid "Number of buttons"
+msgstr "琉铋 狍蝾龛"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "亦滏桕桉蜞"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "妈弪磬祚赅 \"麒耠钼 疱滂鲟\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Thailand"
-msgstr "亦殡囗"
+msgid "Module"
+msgstr "填潴"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Togo"
-msgstr "翌泐"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"枢蝾 漕嵇腠屙桢, 铒帏觇蝈 礤 聱玟噤屙 蜞玷 镳钽疣爨 桦 \"foomatic-"
+"configure\" 礤 祛汔 溧 狷溧 镳艴恸痣龛."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "责囗鲨 捩龛 义痂蝾痂"
+msgid "Hardware"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Chad"
-msgstr "奏"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl Alt 觌噔桫 邃眍怵屐屙眍"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "隐痍 枢殛铖 务蝠钼"
+msgid "United States"
+msgstr "牙"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "砚噻桦屙"
+msgid "Default OS?"
+msgstr "窝 镱 镱漯噻徼疣礤 ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syria"
-msgstr "谚痂"
+msgid "Swiss (German layout)"
+msgstr "剽彘鲟瘃赅 (礤祚赅 磬疱溽)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "烹 燕脞噤铕"
+msgid "Configure all heads independently"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "燕 翌戾 橡桧耔镨"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suriname"
-msgstr "洋痂磬"
+msgid "NTP Server"
+msgstr "NTP 聱疴"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Somalia"
-msgstr "杨爨腓"
+msgid "Load/Save on floppy"
+msgstr "青疱滂/青镟玷 磬 滂耜弪"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Senegal"
-msgstr "彦礤汔"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "San Marino"
-msgstr "燕 锑痂眍"
+msgid "nice"
+msgstr "漕狷"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "谚屦 隋铐"
+msgid "Leaving in %d seconds"
+msgstr "项玮铍屙 %d 皴牦礓"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "央钼嚓"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "填, 桤徨疱蝈 皴痂屙 镱痱 犏 觐轵 疋玎 祛溴禚 忤."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "砚嚯徉痄 唔 锑殄 务蝠钼"
+msgid "Country"
+msgstr "羊疣磬"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Slovenia"
-msgstr "央钼屙"
+msgid "Property"
+msgstr "杨狁蜮屙铖"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Helena"
-msgstr "砚弪 烹屙"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Singapore"
-msgstr "谚磴囡箴"
+msgid "LAN Configuration"
+msgstr "袜耱痤殛 磬 腩赅腠 祓彐"
#: ../../lang.pm:1
#, c-format
-msgid "Sudan"
-msgstr "洋溧"
+msgid "Ghana"
+msgstr "绵磬"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Seychelles"
-msgstr "彦轼咫"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Solomon Islands"
-msgstr "杨腩祛眍忤 务蝠钼"
+msgid "Advanced Options"
+msgstr "念嵇腠栩咫龛 铒鲨"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "燕箐栩耜 鲤噌"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Rwanda"
-msgstr "畜囗溧"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+" 蝾玷 祛戾眚 蝠徕 溧 桤徨疱蝈 觐 腩忮 溧 狷溧 桤镱腌忄龛 玎 "
+"桧耱嚯圉\n"
+"磬 忄蜞 Mandrake Linux 耔耱屐. 狸 腩忮蝈 忮麇 襦 铒疱溴脲龛, 溧腓 铗\n"
+"镳邃桫磬 桧耱嚯圉 磬 GNU/Linux 桦 铗 漯筱 桧耱痼戾眚 玎 疣玟咫礤, "
+"祛驽蝈\n"
+"溧 桤镱腌忄蝈 聱耱怏忄蝈 溧腩忮. 镳铗桠屙 耠篦嚅 蝠徕 溧 铒疱溴腓蝈\n"
+"腩忮 铗 蜮滂 滂耜.\n"
+"\n"
+"青 溧 聱玟噤弪 腩忮, 蝠徕 嵇疴 溧 桤徨疱蝈 蜮 滂耜. 填驽蝈 溧\n"
+"桤徨疱蝈 滂耜 玎 疣玟咫礤, 赅蝾 鳅觏弪 磬 \"hda\" 玎 嵇疴 IDE "
+"篑蝠铋耱忸,\n"
+"\"hdb\" 玎 怛铕铗, \"sda\" 玎 嵇疴 SCSI 篑蝠铋耱忸 ...\n"
+"\n"
+"青 溧 疣玟咫栩 桤狃囗 蜮 滂耜, 祛驽蝈 溧 桤镱腌忄蝈 耠邃龛 铒鲨:\n"
+"\n"
+" * \"如麒耱 怦梓觐\": 蜞玷 铒鲨 桤蝠桠 怦梓觇 腩忮 磬 桤狃囗 滂耜.\n"
+"\n"
+" * \"棱蝾爨蜩黜 聱玟噔囗錦": 蜞玷 铒鲨 镱玮铍忄 噔蝾爨蜩黜 溧 聱玎溴蝈\n"
+"Ext2 swap 腩忮 疋钺钿眍蝾 镳铖蝠囗耱忸 磬 蜮滂 忤 滂耜.\n"
+"\n"
+" * \"扬囫 蜞犭桷囹 腩忮\": 嚓 蜞犭桷囹 腩忮 镱怵邃屙, 祛驽蝈\n"
+"溧 皴 铒栩囹 溧 恸珩蜞眍忤蝈 蜞玷 铒鲨. 填, 狷溴蝈 忭桁囹咫龛 鑌n"
+"镱祉弪, 麇 祛驽 溧 礤 耱囗.\n"
+"\n"
+" * \"满痦鑌": 桤镱腌忄轵 蜞玷 铒鲨, 玎 溧 铗戾龛蝈 镳铎屙栩.\n"
+"\n"
+" * \"橡彗囵邃鑌": 祛驽蝈 溧 桤镱腌忄蝈 蜞玷 铒鲨, 嚓 桉赅蝈 溧 恸痦弪錦n"
+"怦梓觇 镳铎屙 溧 玎疱滂蝈 嵇疴铐圜嚯磬蜞 蜞犭桷 腩忮.\n"
+"\n"
+" * \"锑泓铖龛闬": 桤镱腌忄轵 蜞玷 铒鲨, 嚓 桉赅蝈 溧 桤镱腌忄蝈 "
+"爨泓铖龛,\n"
+"溧 疣玟咫 蜮滂 忤 滂耜. 翌忄 皴 镳屣铕忄, 嚓 爨蝈 漕耱囹眍 "
+"镱珥囗\n"
+"玎 疣玟咫礤蝾.\n"
+"\n"
+" * \"满珩蜞眍忤 铗 滂耜弪郳": 蜞玷 铒鲨  忤 镱玮铍 溧 恸珩蜞眍忤蝈 "
+"玎镟珏磬\n"
+"镳邃 蝾忄 磬 滂耜弪 蜞犭桷 腩忮.\n"
+"\n"
+" * \"青镟玷 磬 滂耜弪郳": 玎镟玮 蜞犭桷囹 腩忮 磬 滂耜弪. 项脲珥 "
+"镳鑌n"
+"邂屙蝮嚯眍 恸珩蜞眍忄礤 磬 蜞犭桷囹 镳 礤钺躅滂祛耱. 谚腠 皴 "
+"镳屣铕忄\n"
+"溧 磬镳噔栩 蝾忄.\n"
+"\n"
+" * \"妙蝾忸\": 觐汔蝾 耱 疋腓 疣玟咫礤蝾 磬 蜮滂 耔 滂耜, 蝾忄 "
+"\n"
+"玎镨 镳铎屙栩 恸瘐 滂耜.\n"
+"\n"
+"青徨脲驽蜞: 祛驽蝈 溧 漕耱桡礤蝈 怦赅 铒鲨 桤镱腌忄殛 觌噔栲蝮疣蜞.\n"
+"惕磬忄轵 镳彗 腩忮蝈 桤镱腌忄殛 [Tab} 耱疱腙栩 磬泐疱/磬漕塍.\n"
+"\n"
+"暑汔蝾 桤狃囗 , 祛驽蝈 溧 桤镱腌忄蝈:\n"
+"\n"
+" * Ctrl-c, 玎 溧 聱玟噤弪 眍 (嚓 桤狃囗 镳噻屙 );\n"
+"\n"
+" * Ctrl-d, 玎 溧 桤蝠桢蝈 ;\n"
+"\n"
+" * Ctrl-m, 玎 溧 篑蜞眍忤蝈 蝾麝 磬 祛眚桊囗.\n"
+"\n"
+"狸 桧耱嚯栩 磬 PPC 爨磬, 耔泱痦  桉赅蝈 溧 聱玟噤弪 爨膪 HFS\n"
+"\"bootstrap\" 铗 镱礤 1 塘, 觐轵  狷溴 桤镱腌忄 铗 boot loader-\n"
+"yaboot. 狸 耢蜞蝈 溧 磬镳噔栩 豚 镱-泐, 磬镳桁屦 50 塘, 祛驽蝈 溧 "
+"泐\n"
+"磬戾痂蝈 玎 镱脲珥 耱, 犏溴蝾 溧 聱躔囗忄蝈 觐 漯 桦 image 磬\n"
+"ramdisk 耠篦嚅 磬 桤恸眇邃龛 耔蝮圉梃."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Russia"
-msgstr "畜耔"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Romania"
-msgstr "畜禚龛"
+msgid "There was an error installing packages:"
+msgstr "项忤 皴 沭屮赅 镳 桧耱嚯桊囗 磬 镟赍蜩蝈:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reunion"
-msgstr "需楮"
+msgid "Lexmark inkjet configuration"
+msgstr "袜耱痤殛 磬 Lexmark inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Qatar"
-msgstr "枢蜞"
+msgid "Undo"
+msgstr "满痦"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palau"
-msgstr "相豚"
+msgid "Save partition table"
+msgstr "青镟玷 蜞犭桷囹 腩忮蝈"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "相疣汊嚅"
+msgid "Finnish"
+msgstr "澡黼囗漶赅"
#: ../../lang.pm:1
#, c-format
-msgid "Portugal"
-msgstr "项痱筱嚯"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "青镟玷 桤犷 磬 镟赍蜩"
+msgid "Macedonia"
+msgstr "锑赍漕龛"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "象屦蝾 需觐"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"扬钿咫礤蝾 磬 镱蝠遽栩咫耜 滂疱牝铕梃 桤镱腌忄 沭箫 \"fileshare\".\n"
+"填驽 溧 桤镱腌忄蝈 userdrake,玎 溧 漕徉忤蝈 镱蝠遽栩咫 犏 蜞玷 沭箫."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "翔蜿妃痦"
+msgid "Slovenian"
+msgstr "央钼屙耜"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "砚弪 翔屦 惕赍腩"
+msgid "Libya"
+msgstr "髓徼"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Poland"
-msgstr "项滕"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"袜耱痤殁帙 耜痂矧钼, 桧耱嚯桊囗 磬 耦趄箦, 耱囵蜩疣礤 磬 聱疴..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pakistan"
-msgstr "相觇耱囗"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Philippines"
-msgstr "澡腓镨龛"
+msgid "Table"
+msgstr "亦犭桷"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "相矬 皖忄 免桧"
+msgid "I don't know how to format %s in type %s"
+msgstr "礤 珥囔 赅 溧 纛痨囹桊囔 %s 蜩 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "French Polynesia"
-msgstr "责屙耜 项腓礤玷"
+msgid "Model"
+msgstr "填溴"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Peru"
-msgstr "襄痼"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Panama"
-msgstr "相磬爨"
+msgid "Stop Server"
+msgstr "扬桊 聱疴"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Oman"
-msgstr "戊囗"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "New Zealand"
-msgstr "皖忄 清豚礓"
+msgid "Modem"
+msgstr "填溴"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Niue"
-msgstr "丸"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nauru"
-msgstr "袜箴"
+msgid "Tuvalu"
+msgstr "殷忄塍"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Nepal"
-msgstr "湾镟"
+msgid "Use auto detection"
+msgstr "如镱腌忄 噔蝾爨蜩黜 玎耔鬣礤"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "丸赅疣泱"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM 漕徉 镱滗瘊骊 磬 扈 蝈犟蝾忸-徉玷疣龛蝈 Linux 镳桦铈屙 赅蝾\n"
+"Midnight Commander. 漾 蜞赅 镱玮铍忄 徉玷疣龛蝈 磬 扈 觐礴铍鑌n"
+"疱骅--脲镨 铒屦圉梃, 怅膻麾 镱滗瘊骊 磬 桤赅鬣 戾睨蜞 磬 觐珙豚蜞."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Nigeria"
-msgstr "丸沐痂"
+msgid "Started on boot"
+msgstr "象耥囹 镳 耱囵蜩疣礤"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Norfolk Island"
-msgstr "皖痿铍 务蝠钼"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Niger"
-msgstr "丸沐"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "皖忄 枢脲漕龛"
+msgid "Automatically find available printers on remote machines"
+msgstr "棱蝾爨蜩黜 铗牮桠 磬腓黜栩 镳桧蝈痂 磬铗溧脲麇龛蝈 爨龛"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
-msgstr "袜扈徼"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "填玎灬桕"
+msgid "East Timor"
+msgstr "如蝾麇 诣祛"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Malaysia"
-msgstr "锑豚殓"
+msgid "Del profile..."
+msgstr "如蝠铋 镳铘桦 ..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mexico"
-msgstr "体犟桕"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malawi"
-msgstr "锑豚忤"
+msgid "Installing Foomatic..."
+msgstr "软耱嚯桊囗 磬 Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Maldives"
-msgstr "锑脘桠"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "填 桤脲珧 铗 皴耔蜞 桤镱腌忄轵 Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "锑怵桷栝"
+msgid "detected"
+msgstr "玎皴麇磬 "
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Malta"
-msgstr "锑腧"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "甜彐囹 皴 眢驿噱 铗 镳羼蜞痱桊囗. 锐赅蝈 腓 溧 镳羼蜞痱桊囔?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Montserrat"
-msgstr "填眈屦囹"
+msgid "Package: "
+msgstr "相赍: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mauritania"
-msgstr "锑怵栩囗"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "湾 祛汔 溧 镨 /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Martinique"
-msgstr "锑痱桧桕"
+msgid "SECURITY WARNING!"
+msgstr "闲拍酉信颇磐扰 抢 讶糜型窝!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "彦忮痦 锑痂囗钼 务蝠钼"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mongolia"
-msgstr "填磴铍"
+msgid "No, I don't want autologin"
+msgstr "湾, 礤 桉赅 autologin"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar"
-msgstr "惕囗爨"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Mali"
-msgstr "锑腓"
+msgid "All languages"
+msgstr "如犷 磬 彗桕"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "锑赍漕龛"
+msgid "Removing %s"
+msgstr "如蝠桠囗 磬 %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Marshall Islands"
-msgstr "锑瘌嚯钼 务蝠钼"
+msgid "Testing your connection..."
+msgstr "如镳钺忄礤 磬 怵赅蜞..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Madagascar"
-msgstr "锑溧汔耜囵"
+msgid "Cache size"
+msgstr "朽珈屦 磬 赍"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Moldova"
-msgstr "填脘钼"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"相痤豚蜞 皴汔 怅膻麇磬, 眍 桤镱腌忄礤蝾 赅蝾 祓彐钼 觐祜 礤 "
+"镳屣铕栩咫眍."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "填磬觐"
+msgid "Start sector: "
+msgstr "袜鬣脲 皴牝铕: "
#: ../../lang.pm:1
#, c-format
-msgid "Morocco"
-msgstr "锑痤觐"
+msgid "Congo (Brazzaville)"
+msgstr "暑磴 (琉噻桠桦)"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Libya"
-msgstr "髓徼"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"相赍 %s 蝠徕 溧 狷溴 桧耱嚯桊囗\n"
+"锐赅蝈 溧 泐 桧耱嚯桊囹?"
#: ../../lang.pm:1
#, c-format
-msgid "Latvia"
-msgstr "肃蜮"
+msgid "Seychelles"
+msgstr "彦轼咫"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "塔犟屐狍疸"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "髓蜮"
+msgid "Bad password on %s"
+msgstr "祟 镟痤豚 磬 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "隋耦蝾"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"褥 邃桧 礤桤忮耱屙 镳桧蝈 怅膻麇 犏 忄蜞 耔耱屙爨"
#: ../../lang.pm:1
#, c-format
-msgid "Liberia"
-msgstr "髓徨痂"
+msgid "Zambia"
+msgstr "青灬"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "仞 肃黻"
+msgid "Security Administrator (login or email)"
+msgstr "冷扈龛耱疣蝾 镱 耔泱痦铖蝌 (腩汨 桦 烹.镱)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Liechtenstein"
-msgstr "髓躜屙轫"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "燕眚 梭麒"
+msgid "Romanian (qwerty)"
+msgstr "畜禚眈赅 (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "髓忄"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Laos"
-msgstr "肃铖"
+msgid "Czech Republic"
+msgstr "族 绣矬犭桕"
#: ../../lang.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "枢玎躐蜞"
+msgid "Egypt"
+msgstr "陪栾弪"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "枢殪囗钼 务蝠钼"
+msgid "Old configuration (isdn4net)"
+msgstr "羊囵 磬耱痤殛 (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "鼠忮轵"
+msgid "Sound card"
+msgstr "氢箨钼 赅痱"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Korea"
-msgstr "暑疱"
+msgid "Import Fonts"
+msgstr "褥镱痱桊 磬 梏蝾忮"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "暑疱 (彦忮痦)"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"褥囹 邃桧 泐 FAT 隲n"
+"(镱 镳桧鲨 皴 镱腌忄 铗 Microsoft Dos/Windows).\n"
+"橡邃豚汔 嵇疴 溧 镳铎屙栩 泐脲扈磬蜞 磬 蝾玷 隲n"
+"(嚓礤蝈 恸瘐 礤泐, 耠邃 蝾忄 嚓礤蝈 恸瘐 \"橡铎屙 泐脲扈磬蜞\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "砚弪 疏蝰 湾忤"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Comoros"
-msgstr "暑祛痂"
+msgid "Change partition type"
+msgstr "橡铎磬 蜩镟 磬 豚"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "疏痂徉蜩"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cambodia"
-msgstr "枢灬钿驵"
+msgid "Network Options"
+msgstr "甜彐钼 铒鲨"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "疏疸桤蜞"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"项赅玮 蝈爨\n"
+"磬 觐礴铍"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Kenya"
-msgstr "叔龛"
+msgid "Statistics"
+msgstr "羊囹桉蜩觇"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Japan"
-msgstr "唢铐"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "深痄囗"
+msgid "(on %s)"
+msgstr "(磬 %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "哽嚅赅"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Iceland"
-msgstr "锐豚礓"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"凌犭桀蝈赅, 觐蝾 铖桡箴忄 玎蜞 铗 a蜞觇 镳屣忄礤 磬 狍翦 纛痨囹龛 "
+"耱痂磴钼."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Iran"
-msgstr "瑞囗"
+msgid "average"
+msgstr "耩邃眍"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iraq"
-msgstr "瑞嚓"
+msgid "New printer name"
+msgstr "皖忸 桁 磬 镳桧蝈"
#: ../../lang.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "理汶栝耜 蝈痂蝾痂 软滂轳觇 铌遴"
+msgid "Equatorial Guinea"
+msgstr "抨忄蝾痂嚯磬 免桧"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "India"
-msgstr "软滂"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"项玮铍忄/青狃囗忄 噔蝾爨蜩黜 怆桤囗."
-#: ../../lang.pm:1
-#, c-format
-msgid "Israel"
-msgstr "如疣咫"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "祟 backup-羿殡"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ireland"
-msgstr "瑞豚礓"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"青 溧 铗镥鬣蜞蝈 羿殡 铗 觐爨礓龛 疱 (蝈痨桧嚯屙 镳铉铕弼), 桤镱腌忄轵 "
+"觐爨礓囹 \"%s <file>\" 桦 \"%s <file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Indonesia"
-msgstr "软漕礤玷"
+msgid "Currently, no alternative possibility is available"
+msgstr "青 皴汔, 爨 磬腓黜 嚯蝈痦囹桠"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hungary"
-msgstr "禹汔痂"
+msgid "Romanian (qwertz)"
+msgstr "畜禚眈赅 (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Haiti"
-msgstr "锗栩"
+msgid "Write Config"
+msgstr "青镨疋 磬耱痤殛"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Croatia"
-msgstr "怔疴囹"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"touted 溴祛磬 镱玮铍忄 蜞犭桷 玎 IP 痼蜩疣礤 噔蝾爨蜩黜 钺眍忄磬 黟彗\n"
+"RIP 镳铗铌铍. 念赅蝾 RIP 痤觐 桤镱腌忄磬 玎 爨腙 祓彐, 玎 镱-耠铈龛\n"
+"镳铗铌铍 玎 痼蜩疣礤 襦 眢骓 玎 耠铈龛 祓彐. "
#: ../../lang.pm:1
#, c-format
-msgid "Honduras"
-msgstr "疹礓箴囫"
+msgid "Kiribati"
+msgstr "疏痂徉蜩"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "怔痄 锑昴铐嚯 务蝠钼"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"项玮铍忄/青狃囗忄 铗溧脲麇眍 怆桤囗 磬 root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Hong Kong"
-msgstr "疹磴 暑磴"
+msgid "Browse"
+msgstr "橡邈脲"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "China"
-msgstr "疏蜞"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Guyana"
-msgstr "描磬"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "锐赅蝈 腓 皴汔 溧 铒栩囹 怵赅 犏 软蝈痦弪 ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "免桧-凌襦"
+msgid "Belgian"
+msgstr "铃脬栝耜"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Guam"
-msgstr "皿囔"
+msgid "Do you have an ISA sound card?"
+msgstr "褥囹 腓 ISA 玮箨钼 赅痱?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "免囹屐嚯"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"湾 徨 磬戾疱 祓彐钼 噤囡蝈 耔耱屐囹 忤.\n"
+"湾 祛驽蝈 溧 磬耱痤栩 蜞犏 忤 怵赅."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "捩龛 燕礓忤麇忤 务蝠钼 捩磬 逆铕滏"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "抨忄蝾痂嚯磬 免桧"
+msgid "Can't make screenshots before partitioning"
+msgstr "湾 祛汔 溧 磬镳噔 祛戾眚磬 \"耥桁赅\" 镳邃 疣玟咫礤蝾 磬 滂耜 "
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Guadeloupe"
-msgstr "免噤咫箫"
+msgid "Host Name"
+msgstr "褥 磬 躅耱"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Guinea"
-msgstr "免桧"
+msgid "/File/Save _As"
+msgstr "/脏殡/青镨 _赅蝾"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gambia"
-msgstr "绵灬"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Greenland"
-msgstr "灭屙豚礓"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s 礤 徉玎蜞 溧眄 磬 耜屙屦, 溧 觐眙桡箴桊囔 瘊黜?"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "描狃嚯蜞"
+msgid "Delay before booting default image"
+msgstr "青徉礤 镳邃 耱囵蜩疣礤蝾 磬 镱漯噻徼疣 钺疣"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghana"
-msgstr "绵磬"
+msgid "Restrict command line options"
+msgstr "毋疣龛麒 铒鲨栩, 玎溧忄龛 铗 觐爨礓龛 疱"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "French Guiana"
-msgstr "责屙耜 免栲磬"
+msgid "East Europe"
+msgstr "如蝾黜 赔痤镟"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "灭箸"
+msgid "Use free space"
+msgstr "如镱腌忄 疋钺钿眍蝾 耱"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Grenada"
-msgstr "灭屙噤"
+msgid "use dhcp"
+msgstr "桤镱腌忄 DHCP"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "United Kingdom"
-msgstr "理汶"
+msgid "Mail alert"
+msgstr "项漯邃徉 磬 镱"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Gabon"
-msgstr "绵犷"
+msgid "Internet configuration"
+msgstr "袜耱痤殛 磬 软蝈痦弪"
#: ../../lang.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "务蝠钼 脏痤"
+msgid "Uzbekistan"
+msgstr "隅徨觇耱囗"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "惕牮铐彗"
+msgid "Detected %s"
+msgstr "青皴麇 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "灶腙脲礓耜 务蝠钼 (锑脞桧)"
+msgid "/Autodetect _printers"
+msgstr "/棱蝾爨蜩黜 铗牮桠 _镳桧蝈痂"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Fiji"
-msgstr "澡滏"
+msgid "Finish"
+msgstr "青恸瘌"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Finland"
-msgstr "澡黼囗滂"
+msgid "Show automatically selected packages"
+msgstr "项赅骅 噔蝾爨蜩黜 铗徨玎龛蝈 镟赍蜩"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ethiopia"
-msgstr "膨桀镨"
+msgid "CPU flags reported by the kernel"
+msgstr "噪嚆钼 磬 CPU 聱钺龛 铗 漯铗"
#: ../../lang.pm:1
#, c-format
-msgid "Spain"
-msgstr "锐镟龛"
+msgid "Togo"
+msgstr "翌泐"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Eritrea"
-msgstr "硼栩疱"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "湾 徨 沭屮眍! - 泥腓 mkisofs 桧耱嚯桊囗?"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "青镟漤 燕踵疣"
+msgid "16 MB"
+msgstr "16 塘"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Egypt"
-msgstr "陪栾弪"
+msgid "Please try again"
+msgstr "填, 铒栩嚅蝈 铗眍忸"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Estonia"
-msgstr "篷蝾龛"
+msgid "The model is correct"
+msgstr "翌玷 祛溴 镳噔桦屙"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "抨忄漕"
+msgid "FAT resizing failed: %s"
+msgstr "湾篑镥 镳屦噻溴礤 磬 FAT: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Algeria"
-msgstr "离骅"
+msgid "Individual package selection"
+msgstr "如徼疣礤 磬 镟赍蜩 邃桧 镱 邃桧"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "念扈龛赅眈赅 绣矬犭桕"
+msgid "This partition is not resizeable"
+msgstr "妙脲扈磬蜞 磬 豚 礤 祛驽 溧 狷溴 镳铎屙屙"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dominica"
-msgstr "念扈龛赅"
+msgid "Location"
+msgstr "体耱铒铍铈屙桢"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Denmark"
-msgstr "泥龛"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "逆栳篁"
+msgid "Journalised FS"
+msgstr "企痦嚯磬 FS"
#: ../../lang.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "疏嵇"
+msgid "Guatemala"
+msgstr "免囹屐嚯"
-#: ../../lang.pm:1
-#, c-format
-msgid "Christmas Island"
-msgstr "暑脲漤 务蝠钼"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(磬 蜞玷 爨磬)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "枢镱 洛痄"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "馏赈 磬 篑蝠铋耱忸蝾 镱 DOS: %s (镳铖蝾 镳邃镱腩驽龛)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cuba"
-msgstr "鼠徉"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Colombia"
-msgstr "暑塍灬"
+msgid "Bahrain"
+msgstr "拎躔彘"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cameroon"
-msgstr "枢戾痼"
+msgid "omit scsi modules"
+msgstr "徨 scsi 祛潴腓"
-#: ../../lang.pm:1
-#, c-format
-msgid "Chile"
-msgstr "阻腓"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "羿扈腓 cpu (磬镳: 6 玎 i686 觌囫)"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "务蝠钼 鼠"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"寅 赅蝾 镳噔栩 祓彐钼 桧耱嚯圉, 祓彐囹 忤 忮麇 磬耱痤屙.\n"
+"助觏弪 Ok, 玎 溧 玎镟玷蝈 磬耱痤殛囹, 桦 悟磬, 玎 溧 镳屙囫蝾栩 "
+"软蝈痦弪 祓彐钼囹 耔 怵赅.\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "暑 '桠钹"
+msgid "Keyboard layout: %s\n"
+msgstr "诣 觌噔栲蝮疣: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "剽彘鲟痂"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"殷 祛驽 溧 疱蝈 溧腓 镳桧蝈痂蝈 疋玎龛 犏 忄蜞 爨磬  狷溧 "
+"漕耱龛 铗 铗溧脲麇龛蝈 爨龛 铗 觐."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "暑磴 (琉噻桠桦)"
+msgid "Maltese (US)"
+msgstr "锑腧栝耜 (US)"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "皱眚疣腠钹麴桕囗耜 绣矬犭桕"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"填眚桊 溴祛眚桊 怦赅赈 Network File System (NFS), SMB (LAN\n"
+"Manager/Windows), NCP (NetWare)."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "暑磴 (疏眸囫)"
+msgid "Tvcard"
+msgstr "TV 赅痱"
-#: ../../lang.pm:1
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "暑觐耦忤 务蝠钼"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "橡屐桧 皖痨嚯屙 疱骅"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canada"
-msgstr "枢磬溧"
+msgid "Size"
+msgstr "妙脲扈磬"
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "铃腓"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "昧"
#: ../../lang.pm:1
#, c-format
-msgid "Belarus"
-msgstr "铃豚痼"
+msgid "Greenland"
+msgstr "灭屙豚礓"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Botswana"
-msgstr "令蝰忄磬"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bouvet Island"
-msgstr "务蝠钼 馏忮"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bhutan"
-msgstr "馏蜞"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"玉蜞眍怅囹 磬 扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 玎恸瘌屙.\n"
+" 祛戾眚 怅膻麇磬.\n"
+"\n"
+"枢赈 桉赅蝈 溧 磬镳噔栩 ?"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bahamas"
-msgstr "拎踵扈"
+msgid "Delete All NBIs"
+msgstr "如蝠桠 怦梓觇 NBI"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Brazil"
-msgstr "琉噻桦"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "令腓忤"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "琉箜彘"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "暑 磬耱痤殛 磬 XFree 桉赅蝈 溧 桁囹 ?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "铃痨箐"
+msgid "More"
+msgstr "矽"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Benin"
-msgstr "铃龛"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+" 蝾忄 龛忸 磬 耔泱痦铖, 镱腌忄礤蝾 磬 耔耱屐囹 赅蝾 聱疴 耱噔 "
+"恸珈铈眍.\n"
+"谚泱痦铖蝌 皴汔 漕耱囹眍 泐爨 溧 皴 桤镱腌忄 耔耱屐囹 赅蝾\n"
+"聱疴 镳桢爨 怵觇 铗 祉钽 觌桢眚. "
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burundi"
-msgstr "馏痼礓"
+msgid "Account Password"
+msgstr "相痤豚 磬 嚓囿眚"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "拎躔彘"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"如徉躜 溧 桧耱嚯桊囹 bootloader 磬 隲n"
+"翌忄 镳邃镱豚汔,麇 忮麇 桁囹 bootloader 磬 滂耜(磬镳桁屦: System "
+"Commander).\n"
+"\n"
+"悟 觐 滂耜 玎疱驿囹 ?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "龙脬囵"
+msgid "Tajik keyboard"
+msgstr "亦滏桕桉蜞眈赅 觌噔栲蝮疣"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "馏痍桧 脏耦"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"填驽蝈 溧 觐镨疣蝈 磬耱痤殛栩 磬 镳桧蝈疣, 觐栩 耱 桤恸瘌桦 玎 spoller %"
+"s 磬 %s, 蝈牦 spooler. 豚蜞 桧纛痨圉 玎 磬耱痤殛栩 (桁 礤 镳桧蝈, "
+"铒桉囗桢, 戾耱铒铍铈屙桢, 忤 磬 怵赅蜞 磬耱痤殛 镱 镱漯噻徼疣礤) 皴 "
+"镳彗囡桉忄, 眍 疣犷蜩蝈 礤 皴 镳艴恸痣.\n"
+"湾 怦梓觇 铒帏觇 祛汔 溧 狷溧 镳艴恸痣屙 镱 耠邃龛蝈 镳梓桧:\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bangladesh"
-msgstr "拎磴豚溴"
+msgid "Font List"
+msgstr "扬桉 梏蝾忮"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Barbados"
-msgstr "拎疳噤铖"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"填驽 徼 皴 眢驿噱蝈 溧 镳铎屙栩 Open Firmware 耱囵蝾忸蝾 篑蝠铋耱忸,\n"
+" 玎 溧 矬耥弪 玎疱驿帙囹 镳钽疣爨. 狸 礤 忤驿囹 镱漶赅珀囹 镳鑌n"
+" 疱耱囵蜩疣礤, 玎漯蝈 Command-Option-O-F 镳 疱耱囵蜩疣礤 恸忮溴蝈:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" 央邃 觐弪 磬镨蝈: shut-down\n"
+"橡 耠邃忄蝾 疱耱囵蜩疣礤 徼 蝠徕嚯 溧 忤溴蝈 镱漶赅珀囹."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "令耥 斟瘀邈钼桧"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"如汶彐溧 桁囹 耱囵钼疱祚赅 桦 礤桤忮耱磬\n"
+"爨磬, 磬 觐蝾 yaboot 爨 溧 镳铕噌铗.\n"
+"软耱嚯圉蜞  镳钿骅, 眍  蝠徕郳n"
+"溧 栾铍玮囹 BootX, 玎 溧 耱囵蜩疣蝈 爨磬蜞 耔"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "犁屦徉殇驵"
+msgid "Select file"
+msgstr "如徨疱蝈 羿殡"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Aruba"
-msgstr "鲤筢"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "如犷 磬 祓彐 桦 躅耱 玎 觐轵 腩赅腠 镳桧蝈  狷溴 疣琊屮屙:"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australia"
-msgstr "棱耱疣腓"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"填驽蝈 溧 桤镱腌忄蝈 蜞玷 觐爨礓 镱脲蝾 \"暑爨礓 玎 镥鬣騖" 磬 "
+"镥鬣蝽栩 滂嚯铉 祉顑 镳桦铈屙. 皖 颌 礤 镱耱噔轵 桁弪 磬 羿殡, "
+"玎蝾 蝾 皴 镱溧忄 铗 镳桦铈屙桢蝾.\n"
#: ../../lang.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "漓屦桕囗耜 燕祛"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "Argentina"
-msgstr "鲤驽眚桧"
+msgid "Japan"
+msgstr "唢铐"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "理蜞痍蜩赅"
+msgid "Print option list"
+msgstr "扬桉 镳桧蝈痦 铒鲨"
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
-msgstr "理泐豚"
+msgid "The change is done, but to be effective you must logout"
+msgstr "橡铎屙栩 襦 玎镟珏龛, 眍 玎 溧 狷溧 弭尻蜩忭 蝠徕 溧 桤脲珏蝈"
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "疹豚礓耜 理蜩腓"
+msgid "Search servers"
+msgstr "寅瘃 聱疴"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "鲤戾龛"
+msgid "NCP queue name missing!"
+msgstr "髓锺忄 桁 磬 NCP 铒帏赅 !"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Albania"
-msgstr "离徉龛"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "理汨豚"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM 铉嚆豚忮 \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "理蜩泱 拎疳箐"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"青镟玮 恸珩蜞眍蜞 镱蝾赅 磬 耔耱屐磬 屙蝠铒 玎 镱-泐祛 赅麇耱忸\n"
+"磬 镳铊玮铍眍 沐礤痂疣礤 磬 麒耠."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "吾邃桧屙 鲤噌耜 澎桊耱忄"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"湾篑镥 镳钼屦赅 磬 羿殡忄 耔耱屐 %s. 锐赅蝈 腓 溧 铒疣忤蝈 沭屮觇蝈? "
+"(狷溴蝈 忭桁囹咫龛, 祛驽 溧 玎泱徼蝈 溧眄)"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Andorra"
-msgstr "理漕疣"
+msgid "Turn your computer into a reliable server"
+msgstr "橡邂礤蝈 忄蜞 爨磬 磬溴驿屙 聱疴"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "吏汔龛耱囗"
+msgid " (driver %s)"
+msgstr " (漯嚅忮 %s)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Loopback 羿殡(钼):\n"
+" %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"戊嚆襦 牮\" 铗 祛眚桊囗: %s\n"
+msgid "I don't know"
+msgstr "湾 珥囔"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "销疴 镳屐圊龛 腩汨黜栩 腩忸\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP 躅耱 \"%s\", 镱痱 %s"
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"PCMCIA 镱漯赅蜞 爨 镱忮麇 溧 聱疋蝮忄 玎 漯 2.2. 填, 桤镱腌忄轵 "
-"2.4"
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "劣彝乓 椅献乓 !"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"锣蜞 赅痱 祛戾眚 桤镱腌忄 %s\"%s\" 漯嚅忮 (镱漯噻徼疣 漯嚅忮 玎 "
+"赅痱囹 忤 \"%s\")"
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "青 溧 嚓蜩忤疣蝈 扈囹 耔,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "如躅 铗 桧耱嚯圉桀眄囹 镳钽疣爨"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "填, 镳钺忄轵 扈囹 耔"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "铃 扈"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "丸忸 磬 耔泱痦铖"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "爨"
+msgid "Mongolian (cyrillic)"
+msgstr "填磴铍耜 (觇痂腓鲟)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "3 狍蝾磬"
+msgid "Add a module"
+msgstr "念徉忤 祛潴豚"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 狍蝾磬"
+msgid "Profile to delete:"
+msgstr "橡铘桦 玎 桤蝠桠囗:"
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "1 button"
-msgstr "1 狍蝾"
+msgid "Local measure"
+msgstr "祟赅腠 桤戾疴囗"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "BUS 扈"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
+msgid "Account Login (user name)"
+msgstr "褥 磬 嚓囿眚 (镱蝈徼蝈腭觐 桁)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (皴痂轫, 铗 耱囵 蜩 C7)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall 觐眙桡箴圉\n"
+"\n"
+"俞邃弪 皴, 麇 忤 桁囹 觐眙桡箴桊囗 软蝈痦弪/软蝠囗弪 漕耱 馶n"
+"drakconnect 镳邃 溧 镳噔栩 漯筱 礤 镱-磬蜞蝥."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Benin"
+msgstr "铃龛"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
+msgid "Uruguay"
+msgstr "羽筱忄"
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Path selection"
+msgstr "如犷 磬 嵇"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "填龛蝾: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"湾 腩 耱噔 篑蝠铋耱忸蝾 忤.\n"
+"义耱 玎 鲥腩耱 磬 溧眄栩 镳铒噤磬.\n"
+"翌忄 珥圜, 麇 镨襦礤蝾 磬 赅赈铗 徼腩 镱 滂耜  镳邂瘊\n"
+"镳铊玮铍眍 犷觌箨"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Printer host name or IP missing!"
+msgstr "髓锺忄 桁 磬 躅耱 磬 镳桧蝈餫 桦 IP!"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "吾桕眍忮眄 3-狍蝾眄 扈"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "填, 桤徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "吾桕眍忮眄 2-狍蝾眄 扈"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "serial"
-msgstr "皴痂轫"
+msgid "Bangladesh"
+msgstr "拎磴豚溴"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic"
-msgstr "吾"
+msgid "Initial tests"
+msgstr "袜鬣腠 蝈耱钼"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "袜蜞蝥"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "孰桢眚耜"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "吾桕眍忮眄 PS2 扈"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+"\"%s\"嚓 磬戾 玮箨钼 赅痱, 忤滂蝈 聱钺龛 玎 蝾忄.\n"
+"狸 玎徨脲骅蝈,麇 磬戾疱磬蜞 玮箨钼 赅痱 礤 铗泐忄 磬 桉蜩磬蜞,\n"
+"祛驽蝈 溧 鳅觏弪 磬 狍蝾磬 溧 桤徨疱蝈 漯筱 漯嚅忮."
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Script-based"
+msgstr "拎玷疣磬 磬 耜痂矧"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Standard"
-msgstr "羊囗溧痱磬"
+msgid "Error reading file %s"
+msgstr "灭屮赅 镳 麇蝈礤蝾 磬 羿殡 %s"
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "惕 磬 Sun"
+msgid "PLL setting:"
+msgstr "PLL 磬耱痤殛:"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "橡邂觌忄礤 戾驿 眍痨嚯眍 耦痱桊囗 镱 沭箫"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "茵徕 溧 桁囹 FAT 祛眚桊囗 /boot/efi"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "如麒耱 潸疴铗"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "朽瑛桊 潸疴铗"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL 蝠徕 溧 玎镱麾 http:// 桦 https://"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "软纛痨圉"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"茵徕 滂疱牝眍 溧 铒疱溴腓蝈 URI 玎 漕耱 漕 镳桧蝈疣. URI 蝠徕 溧 "
+"桤嵇腠 桦 CUPS 桦 Foomatic 耧弼梏桕圉梃蝈. 悟徨脲驽蝈, 麇 礤 怦梓觇 "
+"蜩镱忮 URI 皴 镱滗瘊疰囹 铗 spooler-栩."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "埋梓觐 镳噔桦眍 腓 ?"
+msgid "Other OS (SunOS...)"
+msgstr "酿筱 窝 (SunOS...)"
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "软耱嚯桊嚅/吾眍忤"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "灭屮赅 镳 玎镨 恸 羿殡 %s"
+msgid "%d packages"
+msgstr "%d 镟赍蜞"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "祟 backup-羿殡"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "满珩蜞眍忄礤蝾 铗 羿殡 %s 礤 篑: %s"
+msgid "Domain Authentication Required"
+msgstr "如桉赈 蠕屙蜩翳赅鲨 玎 念戾轫"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"褥囹 镳噻龛磬 蜞犭桷囹 腩忮蝈, 眍 礤 祛汔 溧 桤镱腌忄.\n"
-"配桧耱忮龛 磬麒 溧 镳屐羼蜩蝈 汶噔龛蝈 耔 腩忮, 玎 溧 桁囹 镳噻眍 "
-"耱 耠邃 extended-腩忮蝈"
+"\n"
+"\n"
+" 岭嚆钿囵眍耱:\n"
+"\t- LTSP 橡铄牝 http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "朽瑛桊屙 腩忮 礤 皴 镱滗驵 磬 蜞玷 镫囹纛痨"
+msgid "Costa Rica"
+msgstr "暑耱 需赅"
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "祛眚桊囗弪 礤 篑: "
+msgid "Use libsafe for servers"
+msgstr "如镱腌忄轵 libsafe 玎 聱疴"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "耱噔"
+msgid "Icelandic"
+msgstr "锐豚礓耜"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "漕狷"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"如镱腌忄礤: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "祉钽 漕狷"
+msgid "Please relog into %s to activate the changes"
+msgstr "填 怆彗蝈 铗眍忸 %s, 玎 溧 嚓蜩忤疣蝈 镳铎屙栩"
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "important"
-msgstr "忄驽"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "must have"
-msgstr "眢驽"
+msgid "Lilo/grub mode"
+msgstr "绣骅 磬 Lilo/grub"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "爨 漕耱囹眍 腩忮 玎 RAID 龛忸 %d\n"
+msgid "Output"
+msgstr "绣珞腧囹"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid 镳铒噤磬"
+msgid "Circular mounts %s\n"
+msgstr "\"戊嚆襦 牮\" 铗 祛眚桊囗: %s\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid 镳铒噤磬 (祛驽 徼 raidtools 腓锺忄 ?)"
+msgid "Martinique"
+msgstr "锑痱桧桕"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "湾 祛汔 溧 镳栳噔 犏 _纛痨囹桊囗_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr "意 滂耜 / NFS"
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Stop"
-msgstr "羊铒"
+msgid "a number"
+msgstr "眍戾"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start"
-msgstr "羊囵"
+msgid "Swedish"
+msgstr "剽邃耜"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr "橡 玎疱驿囗"
+msgid "Which %s driver should I try?"
+msgstr "暑 %s 漯嚅忮 溧 镳钺忄 ?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"爨 漕嵇腠栩咫磬 桧纛痨圉\n"
-"玎 蜞玷 篑塍汔, 聱驽忄."
+"妈  镱塍麒蝈 蝠邂钽 嚓 邃眍 铗 桤狃铄龛蝈 钺耠箧忄龛 礤 皴 桤嵇腠忄 "
+"镱忮麇"
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "玉塍桡 溴祛龛"
+msgid "Filesystem types:"
+msgstr "妈漕忮 羿殡钼 耔耱屐:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "耧磬"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 磬 HP JetDirect"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "耱囵蜩疣礤"
+msgid "Northern Mariana Islands"
+msgstr "彦忮痦 锑痂囗钼 务蝠钼"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "如徼疣 篑塍汨蝈, 觐栩 蝠徕 溧 皴 矬耥囹 镳 矬耜囗 磬 爨磬蜞"
+msgid "none"
+msgstr "爨"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Database Server"
-msgstr "漾疴 拎玷-溧眄"
+msgid "user :"
+msgstr "项蝠遽栩咫:"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote Administration"
-msgstr "悟溧脲麇磬 噤扈龛耱疣鲨"
+msgid "Please enter your password"
+msgstr "填, 恸忮溴蝈 忄蜞 镟痤豚"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
-msgstr "项溴礤 磬 羿殡钼"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
+"褥 磬 聱玟噔囗 镳铘桦 (眍忤 镳铘桦 皴 聱玟噔 赅蝾 觐镨 磬 蝈牦):"
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet"
-msgstr "软蝈痦弪"
+msgid "Floppy"
+msgstr "噪铒"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "填, 鳅觏弪 磬 眍耔蝈"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printing"
-msgstr "襄鬣蜞礤"
+msgid "Ghostscript referencing"
+msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "羊囵蜩疣 X Font Server (蝾忄 玎潸腈栩咫眍, 玎 溧 蝠礤 XFree)."
+msgid "Bootloader"
+msgstr "Bootloader"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "青疱驿囗 漯嚅忮痂 玎 忄蝈 USB 篑蝠铋耱忄."
+msgid "Move"
+msgstr "橡屐羼蜩"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog 镳钽疣爨 觐蝾 祉钽 溴祛龛 桤镱腌忄 溧 玎镟玮囹 聱钺龛 鈂n"
-"疣珉梓龛 耔耱屐龛 羿殡钼 (腩泐忮). 念狃 镱耱眄 溧 桁囹 疣犷蝈."
+msgid "Bootloader to use"
+msgstr "如镱腌忄磬 玎疱驿帙囹 镳钽疣爨"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "象耥赅礤 玮箨钼囹 耔耱屐 磬 爨磬蜞 忤"
+msgid "SMB server host"
+msgstr "疹耱 磬 SMB 聱疴"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS 聱疴"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"rwho 镳铗铌铍 镱玮铍忄 磬 铗溧脲麇龛 镱蝠遽栩咫 溧 皴 皲钺 聱 耧桉\n"
-"磬 怦梓觇 镱蝠遽栩咫 怆彗腓 磬 爨磬 疣犷蝈 rwho 溴祛 (镱漕徨 磬 "
-"finger)."
+"\n"
+"马桁囗桢\n"
+"\n"
+"填, 镳铟弪弪 篑腩忤蜞 镱-漕塍. 狸 礤 耱 聱汶囫龛 觐 铗 ,\n"
+"礤 祛驽蝈 溧 镳钿骅蝈 桧耱嚯圉蜞 磬 耠邃忄 CD 眍耔蝈. 袜蜩耥弪錦n"
+"'悟赅骅', 玎 溧 镳钿骅蝈 桧耱嚯圉蜞 徨 蝈玷 眍耔蝈腓.\n"
+"\n"
+"\n"
+"觐 觐祜铐屙蜩 聱潸疰帙 皴 耠邃忄 CD 眍耔蝈 礤 襦 疣顼痤耱疣忄騖n"
+"镱 GPL 髓鲥礴 桦 镱漕徨 蜞犏. 埋尻 蜞犏 觐祜铐屙 镱 篑腩忤蜞\n"
+" 镱腩驽龛蜞 磬 耧弼梏梓龛 祗 腓鲥礴. 填, 镳铟弪弪 忭桁囹咫眍 桤腩\n"
+"蝈玷 耧弼梏梓龛 腓鲥礴 镳邃 溧 桤镱腌忄蝈 桦 疣顼痤耱疣忄蝈 "
+"耧铎屙囹栩錦n"
+"觐祜铐屙蜩.\n"
+"亦觇忄 腓鲥礴 镱 镳桧鲨 镳邃铗怵囹忄 镳屙铖, 觐镨疣礤蝾 (铖忮 鲥隲n"
+"聱躔囗屙桢), 疣顼痤耱疣忄礤蝾, 钺疣蝽 桧驽礤痂磴, 溴囫屐犭桊囗弪頫n"
+"溴觐祜桦圉蜞 桦 祛滂翳赅鲨蜞 磬 觐祜铐屙蜩蝈.\n"
+"埋觐 磬痼忄礤 磬 耧钽钿徉蜞 礤玎徉忭 镳弩耱囗钼忄 镳噔囹 忤 镱\n"
+"耧弼梏梓龛 腓鲥礴. 务忮 嚓 耧弼梏梓龛 腓鲥礴 忤 溧忄 蜞觇忄 镳噔,\n"
+"钺桕眍忮眍 礤 祛驽蝈 溧 桧耱嚯桊囹 镳钽疣扈蝈 磬 镱忮麇 铗 邃磬 耔耱屐郳n"
+"桦 溧 汨 镳桡噫溧蝈 玎 桤镱腌忄礤 祓彐. 狸 礤 耱 耔泱痦, 祛\n"
+"疋驽蝈 皴 滂耱痂狍鲨 桦 疱溧牝铕 磬 觐祜铐屙.\n"
+"橡艴恸痣礤蝾 磬 蝠弪 腓鲟 桦 觐镨疣礤蝾 磬 怦赅 觐祜铐屙蜞, 怅膻麒蝈腠頫n"
+"磬 漕牦戾眚圉蜞, 钺桕眍忮眍 襦 玎狃囗屙.\n"
+"\n"
+"\n"
+"埋梓觇 镳噔 磬 觐祜铐屙蜩蝈 铗 耠邃忄 CD 眍耔蝈 镳桧噤脲驵 磬\n"
+"聱铗忮蝽栩 桁 噔蝾痂 襦 玎蝈龛 赅蝾 桧蝈脲牝筻腠 耦狁蜮屙铖 铗\n"
+"玎觐龛蝈 玎 噔蝾瘃觇 镳噔 镳桦铈桁 玎 耦趄箦痦栩 镳钽疣扈.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers 镳铗铌铍 镱玮铍忄 磬 祓彐钼栩 镱蝠遽栩咫 溧 镳钼屦忄 觐 錦n"
-"怆琥 磬 漯筱 铗泐忄蜞 爨磬."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "橡屐圊忄 蝾玷 镳桧蝈 铗 Star Office/OpenOffice.org/GIMP"
#: ../../services.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"rstat 镳铗铌铍 镱玮铍忄 磬 祓彐钼栩 镱蝠遽栩咫 溧 桤怆梓囹\n"
-"镟疣戾蝠栩 磬 恸珈铈眍耱栩 玎 怦赅 爨磬 磬 祓彐囹."
+"Linux Virtual Server 皴 桤镱腌忄 玎 桤沭噫溧礤 磬 忤耦觐镳铊玮钿栩咫屙\n"
+" 漕狃 漕耱屙 聱疴."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted 溴祛磬 镱玮铍忄 蜞犭桷 玎 IP 痼蜩疣礤 噔蝾爨蜩黜 钺眍忄磬 黟彗\n"
-"RIP 镳铗铌铍. 念赅蝾 RIP 痤觐 桤镱腌忄磬 玎 爨腙 祓彐, 玎 镱-耠铈龛\n"
-"镳铗铌铍 玎 痼蜩疣礤 襦 眢骓 玎 耠铈龛 祓彐. "
+msgid "4 billion colors (32 bits)"
+msgstr "4 扈腓囵溧 鲡蜞 (32 徼蜞)"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"砚骅 麒耱 漯嚅忮痂 犭铌钼 篑蝠铋耱忄 (赅蝾 腩忮\n"
-"磬 蜮滂 滂耜), 玎 箫铗疱蜞 铗 镳桦铈屙 赅蝾 Oracle"
+#: ../../lang.pm:1
+#, c-format
+msgid "Micronesia"
+msgstr "惕牮铐彗"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"青镟玮 恸珩蜞眍蜞 镱蝾赅 磬 耔耱屐磬 屙蝠铒 玎 镱-泐祛 赅麇耱忸\n"
-"磬 镳铊玮铍眍 沐礤痂疣礤 磬 麒耠."
+msgid "License"
+msgstr "髓鲥礴"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"Postfix Main Transport Agent (MTA), 觐轵 镳钽疣爨 觐蝾 镳屙囫\n"
-"镱 铗 爨磬 磬 爨磬."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper 皴 耧疣 RPC 怵觇, 觐栩 皴 桤镱腌忄 铗 镳铗铌铍 赅蝾\n"
-"NFS NIS. portmap 聱疴 蝠徕 溧 矬耥囹 磬 爨龛, 觐栩 疣犷 赅蝾\n"
-"聱疴 玎 镳铗铌铍, 觐栩 皴 眢驿 溧 桤镱腌忄 RPC 戾踵龛琥."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "棱蝾爨蜩黜 铗牮桠囗 磬 镳桧蝈 (祟赅脲, TCP/Socket, SMB 镳屙蝈痂)"
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (桤镱腌忄 pppoa) usb"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"PCMCIA 镱滗骊囹 钺桕眍忮眄 镱滗驵 礤 赅蝾 ethernet 祛溴扈 鈂n"
-"laptop-. 翌忄 爨 溧 皴 耱囵蜩疣 镳邃 溧 狷溴 磬耱痤屙, 蜞赅 麇 錦n"
-"镱-漕狃 溧 桁囹 桧耱嚯桊囗 磬 爨龛, 觐栩 礤 皴 眢驿 铗 礤."
+"项忤 皴 沭屮赅 - 礤 襦 铗牮栩 忄腓漤 篑蝠铋耱忄, 恸瘐 觐栩 溧 狷溧 "
+"聱玟噤屙 眍忤 羿殡钼 耔耱屐. 填 镳钼屦弪 蜮滂 耔 滂耜 耔 玎 "
+"镳梓桧囹 玎 蝾玷 镳钺脲"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "项滗瘊骊 磬 OKI 4w 聱忪羼蜩扈 win-镳桧蝈痂."
+msgid "Starting the printing system at boot time"
+msgstr "羊囵蜩疣礤 磬 镳桧蝈痦囹 耔耱屐 镳 耱囵蜩疣礤"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"棱蝾爨蜩黜 怅膻麾囗 磬 numlock 觌噔桫 镱 觐礴铍 鑌n"
-"XFree 镳 耱囵蜩蜞礤."
+msgid "Do you want to start the connection at boot?"
+msgstr "锐赅蝈 腓 溧 耱囵蜩疣蝈 怵赅蜞 耔 镳 玎疱驿囗 ?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS 镱矬疱 镳铗铌铍 玎 钺戾 磬 羿殡钼 镱 TCP/IP 祓彐.\n"
-"亦玷 篑塍汔 铖桡箴忄 趔黻鲨铐嚯眍耱蜞 磬 玎觌忄礤蝾 磬 NFS 羿殡钼弪."
+msgid "Processor ID"
+msgstr "橡铞羼铕 ID"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS 镱矬疱 镳铗铌铍 玎 钺戾 磬 羿殡钼 镱 TCP/IP 祓彐.\n"
-"亦玷 篑塍汔 铖桡箴忄 趔黻鲨铐嚯眍耱蜞 磬 NFS 聱疴, 觐轵 皴 磬耱痤殁郳n"
-"黟彗 羿殡 /etc/exports."
+msgid "Sound trouble shooting"
+msgstr "青蝠箐礤龛 镳 玮箨"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"狸蜩忤疣/溴嚓蜩忤疣 怦梓觇 祓彐钼 桧蝈痿彘耔, 磬耱痤屙 溧 皴 矬耜囹\n"
-"镳 耱囵蜩疣礤 磬 爨磬蜞."
+msgid "Polish (qwerty layout)"
+msgstr "项腭赅 (QWERTY 磬疱溽)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"填眚桊 溴祛眚桊 怦赅赈 Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), NCP (NetWare)."
+msgid "activate now"
+msgstr "嚓蜩忤疣 皴汔"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"named (BIND) Domain Name Server (DNS), 觐轵 皴 桤镱腌忄 溧 镳邂礤\n"
-"桁弪 磬 躅耱 漕 IP 噤疱."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"Linux Virtual Server 皴 桤镱腌忄 玎 桤沭噫溧礤 磬 忤耦觐镳铊玮钿栩咫屙\n"
-" 漕狃 漕耱屙 聱疴."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd 溴祛磬 玎 镥鬣 礤钺躅滂 磬 lpr 溧 疣犷蜩 眍痨嚯眍. 翌 镳铖蝾 錦n"
-"聱疴, 觐轵 铒疱溴 疣犷蜩蝈 玎 镥鬣 磬 镳桧蝈(/栩)."
+msgid "Host \"%s\", port %s"
+msgstr "疹耱 \"%s\", 镱痱 %s"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf 镱觐汔 箴彐溧 桤恸瘌忄礤蝾 磬 疣珉梓龛 玎溧麒\n"
-"镳 耱囵蜩疣礤 玎 镱滗瘊骊 磬 耔耱屐磬蜞 磬耱痤殛."
+msgid "This partition can't be used for loopback"
+msgstr "翌玷 礤 祛驽 溧 狷溴 桤镱腌忄 玎 loopback"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "棱蝾爨蜩黜 玎耔鬣礤 磬耱痤殛 磬 踵痄箦疣 镳 耱囵蜩疣礤."
+msgid "File already exists. Use it?"
+msgstr "脏殡 忮麇 聱耱怏忄. 泥 泐 桤镱腌忄 腓 ?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"棱蝾爨蜩黜 疱沐礤痂疣礤 磬 header-栩 磬 噤痤蝾, /boot 玎\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "received: "
+msgstr "镱塍麇眍: "
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"翌玷 镟赍 玎疱驿 爨痍桊囗囹 觌噔栲蝮痦 磬疱溽 /etc/sysconfig/"
-"keyboard.\n"
-" 祛驽 溧 狷溴 桤狃囗 桧耱痼戾眚 kbdconfig. 茵徕 溧 铖蜞忤蝈 "
-"蝾忄怅膻麇眍 玎 镱忮麇蝾 爨龛."
+msgid "Right Alt key"
+msgstr "腻皴 Alt 觌噔桫"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"玛膻麒 翳腧痂疣礤蝾 磬 镟赍蜩 玎 Linux 漯 皴痂 2.2, 玎\n"
-"磬耱痤赅 磬 玎蝽囹 耱屙, s cel 玎蜞忄 磬 爨磬蜞 忤 铗\n"
-"祓彐钼 囹嚓."
+msgid "the list of alternative drivers for this sound card"
+msgstr "耧桉 磬 嚯蝈痦囹桠龛 漯嚅忮痂 玎 蜞玷 赅痱"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (麇耱 磬痂鬣 inetd) 矬耜 疣珉梓龛 漯筱鑌n"
-"软蝈痦弪 篑塍汨. 翌 铗泐忄 玎 矬耜囗弪 磬 祉钽 篑塍汨 铗 痤溧 磬\n"
-"telnet, ftp, rsh rlogin. 如觌忄礤蝾 磬 inetd 桤觌忄 怦梓觇 篑塍汨,\n"
-"玎 觐栩 铗泐忄."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "项溴礤 磬 羿殡钼"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache World Wide Web (WWW) 聱疴. 翌 耠箧 溧 钺疣犷蜮 磬 HTML "
-"羿殡钼錦n"
-" CGI."
+msgid "Tonga"
+msgstr "翌磴"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake 镳噔 镳钺 磬 踵痄箦疣, 邂屙蝮嚯眍 磬耱痤殁郳n"
-"眍/镳铎屙屙 踵痄箦."
+msgid "Tunisia"
+msgstr "殷龛"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM 漕徉 镱滗瘊骊 磬 扈 蝈犟蝾忸-徉玷疣龛蝈 Linux 镳桦铈屙 赅蝾\n"
-"Midnight Commander. 漾 蜞赅 镱玮铍忄 徉玷疣龛蝈 磬 扈 觐礴铍鑌n"
-"疱骅--脲镨 铒屦圉梃, 怅膻麾 镱滗瘊骊 磬 桤赅鬣 戾睨蜞 磬 觐珙豚蜞."
+msgid "Profile: "
+msgstr "橡铘桦: "
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron 耱囗溧痱磬 UNIX 镳钽疣爨, 觐蝾 镥痂钿梓眍 矬耜 铒疱溴脲龛 镳钽疣扈\n"
-"镱 疣顼桉囗桢. vixie cron 漕徉 祉铈羼蜮 镳彖祗耱忄 磬 蝈玷 磬 镳铖蜩\n"
-"UNIX cron, 怅膻麒蝈腠 镱-漕狃 耔泱痦铖 祛 磬耱痤殁帙 铒鲨."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-"象耜 觐爨礓 镱 疣顼桉囗桢 恸 怵屐 铒疱溴脲眍 铗 觐爨礓囹 at 矬耜郳n"
-"磬犷 铗 漯筱, 觐汔蝾 磬蝾忄疱眍耱蜞 耧噤礤 漕耱囹眍."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"apmd 皴 桤镱腌忄 玎 磬犭屙桢 磬 徉蝈痂蜞 玎镨疋嚅觇 耱囹篑 黟彗\n"
-"syslog. 填驽 聱 溧 皴 桤镱腌忄 玎 耧桊囗 磬 爨磬蜞, 觐汔蝾 徉蝈痂蜞 "
-"桤蝾磬."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacrton - 镥痂钿梓眍 桤嵇腠忄礤 磬 觐爨礓 镱 疣顼桉囗桢."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "湾 怅膻麾 牮栩梓龛 羿殡钼 (passwd, group, fstab)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "象耥 ALSA (Advanced Linux Sound Architecture) 玮箨钼囹 耔耱屐"
+msgid "old static device name used in dev package"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "软耱嚯桊囗 磬 镟赍蜩 ..."
+msgid "This label is already used"
+msgstr "翌玷 弪桕弪 忮麇 皴 桤镱腌忄"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"如镱腌忄礤: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "央邃 纛痨囹桊囗 磬 豚 %s, 怦梓觇 溧眄 恸瘐 礤泐  狷溧 玎泱徨龛"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Connection Time: "
+msgstr "吗屐 磬 怵赅蜞: "
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"填, 耠铈弪 软耱嚯圉桀眄 CD-ROM 篑蝠铋耱忸蝾 磬蜩耥弪 Ok, 觐汔蝾 "
+"耱 泐蝾忤.\n"
+"狸 泐 爨蝈, 磬蜩耥弪 悟磬, 玎 溧 桤徨沩弪 桧耱嚯桊囗弪 铗 蝾玷 CD-"
+"ROM."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Use group id for execution"
+msgstr "如镱腌忄 id 磬 沭箫 镳 桤嵇腠屙桢"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[觌噔栲蝮疣]"
+msgid "Choose the default user:"
+msgstr "如徨疱蝈 镱漯噻徼疣 皴 镱蝠遽栩咫 :"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
+msgid "Gabon"
+msgstr "绵犷"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"\n"
+"悟溧脲麇龛蝈 磬 CUPS 聱疴 镳桧蝈痂 礤 蝠徕 溧 磬耱痤殁囹錦n"
+"蝮; 蝈玷 镳桧蝈痂  狷溧 玎皴麇龛 噔蝾爨蜩黜."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
+"Mandrake Linux 祛驽 溧 镱潸疰 祉钽 彗桷. 如徨疱蝈\n"
+"彗桷栩 觐栩 桉赅蝈 噤 桧耱嚯桊囹. 义  狷溧 磬腓黜 耠邃\n"
+"赅蝾 玎恸瘌 桧耱嚯圉蜞 忤 镳羼蜞痱桊囹 耔耱屐囹."
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
+msgid "Domain"
+msgstr "念戾轫"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "翌麇 疣珈屦 磬 RAM-镟戾蝌, 嚓 礤钺躅滂祛 (磬戾疱龛 %d MB)"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Exit install"
-msgstr "如躅 铗 桧耱嚯圉桀眄囹 镳钽疣爨"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "软耱嚯桊囗 磬 耔耱屐囹"
+msgid "Provider dns 2 (optional)"
+msgstr "2-痂 DNS 磬 漕耱噔麒赅 (镱 驽豚龛)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure services"
-msgstr "袜耱痤殛 磬 篑塍汨蝈"
+msgid "Boot device"
+msgstr "羊囵蜩疣 篑蝠铋耱忸"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "袜耱痤殛 磬 "
+msgid "Which partition do you want to resize?"
+msgstr "暑 驽豚弪 溧 镳铎屙栩?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "软耱嚯桊囗 磬 bootloader"
+msgid "United States Minor Outlying Islands"
+msgstr "锑腙 务蝠钼 镱 牮嚅狃彐桢蝾 磬 牙"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "袜耱铋赅 磬 祓彐囹"
+msgid "A tool to monitor your logs"
+msgstr "软耱痼戾眚 玎 镳邈脲驿囗 磬 忄蝈 腩 羿殡钼"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a user"
-msgstr "念徉礤 磬 镱蝠遽栩咫"
+msgid "Djibouti"
+msgstr "逆栳篁"
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Root password"
-msgstr "满忮溴蝈 镟痤豚 玎 root"
+msgid "detected on port %s"
+msgstr "玎皴麇 磬 镱痱 %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Install system"
-msgstr "软耱嚯桊囗 磬 耔耱屐囹"
+msgid "LPD"
+msgstr "LPD"
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "相赍蜩 玎 桧耱嚯桊囗"
+msgid "Graphics card: %s\n"
+msgstr "灭圄梓磬 赅痱: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "灶痨囹桊囗 磬 腩忮"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning"
-msgstr "朽玟咫礤 磬 腩忮"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "填, 镳钼屦弪 溧腓 桤镱腌忄蝈 DVDRAM 篑蝠铋耱忸"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "青镟玷 桤犷 磬 镟赍蜩"
+
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "如犷 磬 觌噔栲蝮疣"
+msgid "Extended partition not supported on this platform"
+msgstr "朽瑛桊屙 腩忮 礤 皴 镱滗驵 磬 蜞玷 镫囹纛痨"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "如犷 磬 觌囫 桧耱嚯圉"
+msgid "ISDN Configuration"
+msgstr "袜耱痤殛 磬 IDSN"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "青耔鬣礤 磬 滂耜钼弪"
+msgid "high"
+msgstr "忤耦觐"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Configure mouse"
-msgstr "袜耱痤殛 磬 扈"
+msgid "Internet Connection Sharing"
+msgstr "扬钿咫礤 磬 怵赅蜞 软蝈痦弪"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "髓鲥礴"
+msgid "Choose file"
+msgstr "如徨疱蝈 羿殡"
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Language"
-msgstr "如犷 磬 彗桕"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"马桁囗桢 ! 悟牮栩 磬耱痤殛 磬 青蝽 羊屙. 填驽 溧 皴 磬腩骅 赅赈 "
+"瘊黜 镱镳噔赅 耠邃 桧耱嚯圉蜞."
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "襄鬣蜞礤 磬 镳桧蝈 \"%s\""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"锐赅蝈 腓 溧 疣琊屮栩 镥鬣 磬 镳桧蝈痂蝈 耧铎屙囹 泐疱 桦 磬 镳桧蝈痂蝈 "
+" 腩赅腠囹 祓彐?\n"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "如犷 祛溴 磬 镳桧蝈疣"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "吾桕眍忮眄 PS2 扈"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "logdrake"
-msgstr "腩沅疱殛"
+msgid "Removing old printer \"%s\"..."
+msgstr "如蝠桠囗 磬 耱囵 镳桧蝈 \"%s\"..."
-#: ../../ugtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Select a device !"
+msgstr "如徨疱蝈 篑蝠铋耱忸 !"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "如蝠桠囗 磬 铒帏赅蜞"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (桧耱嚯圉 沭圄梓屙 漯嚅忮)"
+msgid "French Southern Territories"
+msgstr "责囗鲨 捩龛 义痂蝾痂"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛 XFree %s.\n"
-"我僚伺婆遗, 着 椅吕 攀严判忍磐依送 衔哪汹剖 饰滔抟谛谝 氯 涛婆 睦 "
-"抢寥."
+msgid "the vendor name of the processor"
+msgstr "桁弪 磬 镳铊玮钿栩咫 磬 镳铞羼铕"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 攀严判忍磐依送O 踵痄箦痦 3D 篑觐疱龛"
+msgid "All data on this partition should be backed-up"
+msgstr "埋梓觇 溧眄 磬 蝾玷 蝠徕 溧 狷溧 囵蹊忤疣龛"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛 XFree %s."
+msgid "Installing package %s"
+msgstr "软耱嚯桊囗 磬 镟赍蜞 %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 踵痄箦痦 3D 篑觐疱龛"
+msgid "Checking device and configuring HPOJ..."
+msgstr "橡钼屦赅 磬 篑蝠铋耱忸 觐眙桡箴圉 玎 HPOJ..."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛, 眍 襦祛 XFree %"
-"s,\n"
-"我僚伺婆遗, 着 椅吕 攀严判忍磐依送 衔哪汹剖 涛婆 睦 抢寥 饰滔抟谛 "
-"氯.\n"
-"枢痱囹 忤 皴 镱滗驵 铗 XFree %s, 觐轵 祛驽 溧 桁 镱-漕狃 镱滗瘊骊 磬 "
-"2D."
+"狸 桉赅蝈 铢 腩忮, 祛 桤蝠栝蝈 邃桧, 玎 溧 祛驽蝈 溧 聱玟噤弪 邃桧 "
+"疣瑛桊屙 "
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛, 眍 襦祛 Xfree %"
-"s.\n"
-"枢痱囹 忤 皴 镱滗驵 铗 XFree %s, 觐轵 祛驽 溧 桁 镱-漕狃 镱滗瘊骊 磬 "
-"2D."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Choose packages to install"
+msgstr "相赍蜩 玎 桧耱嚯桊囗"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "袜耱痤殛 襦祛 磬 赅痱 \"%s\"(%s)"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "如镱腌忄 疣瑛桊屙桢蝾 Xinerama"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "卵茸嗜 聱耱怏忄 腩忮 溧眄栩e 恸瘐 磬 %s  狷溧 玎泱徨龛"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
+"谚耱屐囹 忤 爨 漕耱囹眍 耱 玎 桧耱嚯圉 桦 钺眍忄礤 (%d > %d)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "暑 磬耱痤殛 磬 XFree 桉赅蝈 溧 桁囹 ?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"埋尻 镳桧蝈 皴 眢驿噱 铗 桁 (磬镳桁屦 \"printer\"). 项脲蜞蜞 物桉囗桢 "
+"体耱铒铍铈 礤 蝠徕 溧 狷溧 镱嵇脞囗. 褥 觐戾眚囵 玎 镱蝠遽栩咫栩."
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "袜耱痤殛 磬 XFree"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "如徨疱蝈 赅镟鲨蝈 磬 镟戾蝌 磬 沭圄梓磬蜞 耔 赅痱"
+msgid "Bhutan"
+msgstr "馏蜞"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
+msgid "Network interface"
+msgstr "甜彐钼 桧蝈痿彘"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr ""
+msgid "Reading printer data..."
+msgstr "族蝈礤 磬 溧眄 铗 镳桧蝈疣 ..."
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "如徨疱蝈 X 聱疴"
+msgid "Korean keyboard"
+msgstr "暑疱轳赅 觌噔栲蝮疣"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "X server"
-msgstr "X 聱疴"
+msgid "Not connected"
+msgstr "湾 疋玎"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 塘 桦 镱忮麇"
+msgid "Greek"
+msgstr "灭赅"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 塘"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 塘"
+msgid "Saint Kitts and Nevis"
+msgstr "砚弪 疏蝰 湾忤"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "8 MB"
-msgstr "8 塘"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 塘"
+msgid "Enable OF Boot?"
+msgstr "羊囵蜩疣礤 铗 OF ?"
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 塘"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "湾 祛驽蝈 溧 桤镱腌忄蝈 JFS 玎 镱-爨膪 铗 16 塘"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 塘"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "洛痱桕嚯眍 铒疱耥忄礤 磬 祛龛蝾疣: %s\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "512 kB"
-msgstr "512 柿"
+msgid "path"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 柿"
+msgid "Mount point"
+msgstr "耱 磬 祛眚桊囗"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"泥 玎镟 腓 镳铎屙栩 ?\n"
-"义牦蜞 磬耱痤殛 :\n"
-"\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "物鲨"
+"项忤 皴 沭屮赅:\n"
+"%s\n"
+"物栩嚅蝈 溧 镳铎屙栩 觐 镟疣戾蝠"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Test"
-msgstr "义耱"
+msgid "Restore system"
+msgstr "谚耱屐 玎 恸珩蜞眍忄礤"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resolution"
-msgstr "朽玟咫栩咫磬 耧铖钺眍耱"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "填龛蝾"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "灭圄梓磬 赅痱"
+msgid "Another one"
+msgstr "酿筱"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "洛痱桕嚯磬 耜铕铖 磬 恸珩蜞眍忄礤"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "疹痂珙眚嚯磬 耜铕铖 磬 恸珩蜞眍忄礤"
+msgid "Colombia"
+msgstr "暑塍灬"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"拟囹 牮栩梓龛 镟疣戾蝥疣 襦 忮痱桕嚯磬蜞 耜铕铖 磬 恸珩蜞眍忄礤, 觐蝾 "
-"铗疣忄 耜铕铖蝌, \n"
-" 觐蝾 鲥腓 尻疣 皴 恸珩蜞眍忄, 磬-忄骓铗 - 躅痂珙眚嚯磬蜞\n"
-"耔眭痤龛玎鲨铐磬 耜铕铖, 觐蝾 铗疣忄 耜铕铖蝌, 觐蝾 皴 桤镨疋囹 "
-"躅痂珙眚嚯龛蝈 腓龛.\n"
-"\n"
-"掏蚊 吕仆 溧 桤徨疱蝈 蜞赅忄 耔眭痤龛玎鲨铐磬蜞 耜铕铖, 觐蝾 溧 "
-"铗泐忄 磬 恸珈铈眍耱栩 磬 锣 祛龛蝾 - 镳铗桠屙 耠篦嚅 祛驽蝈 溧 "
-"镱怵邃栩 祛龛蝾疣 耔.\n"
-" 狸 桁囹 赅赈 聱祉屙, 桤徨疱蝈 觐眈屦忄蜩忭 磬耱痤殛."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "橡钺 玎 Plug & Play 礤篑镥. 填, 桤徨疱蝈 镳噔桦屙 祛龛蝾"
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "橡铊玮钿栩咫"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug & Play"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "如徨疱蝈 祛龛蝾"
+msgid "Reunion"
+msgstr "需楮"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "灭圄梓磬 赅痱: %s"
+msgid "Details"
+msgstr "项漯钺眍耱"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "如徨疱蝈 疣玟咫栩咫磬 耧铖钺眍耱 潸脶铟桧 磬 鲡弪钼弪"
+msgid "For security reasons, it will be disconnected now."
+msgstr "青 忄 耔泱痦铖, 皴汔  狷溴蝈 铗恸痃囗."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Resolutions"
-msgstr "朽玟咫栩咫磬 耧铖钺眍耱"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 扈腓囵溧 鲡蜞 (32 徼蜞)"
+msgid "Checking your system..."
+msgstr "橡钼屦赅 磬 忄蜞 耔耱屐..."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 扈腓铐 鲡蜞 (24 徼蜞)"
+msgid "Print"
+msgstr "襄鬣"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 蹊滂 鲡蜞 (16 徼蜞)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 蹊滂 鲡蜞 (15 徼蜞)"
+msgid "Mongolia"
+msgstr "填磴铍"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 鲡蜞 (8 徼蜞)"
+msgid "Mounted\n"
+msgstr "填眚桊囗\n"
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "埋梓觐 镳噔桦眍 腓 ?"
+msgid "Graphical Interface"
+msgstr "灭圄梓屙 桧蝈痿彘"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "项玮铍屙 %d 皴牦礓"
+msgid "Restore Users"
+msgstr "满珩蜞眍忤 项蝠遽栩咫"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"项忤 皴 沭屮赅:\n"
-"%s\n"
-"物栩嚅蝈 溧 镳铎屙栩 觐 镟疣戾蝠"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "孰 玎 牮栾蜩疣礤"
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-"马桁囗桢: 蝈耱忄礤蝾 磬 蜞玷 沭圄梓磬 赅痱 祛驽 溧 玎祓噻 觐祜 忤"
+"portmapper 皴 耧疣 RPC 怵觇, 觐栩 皴 桤镱腌忄 铗 镳铗铌铍 赅蝾\n"
+"NFS NIS. portmap 聱疴 蝠徕 溧 矬耥囹 磬 爨龛, 觐栩 疣犷 赅蝾\n"
+"聱疴 玎 镳铗铌铍, 觐栩 皴 眢驿 溧 桤镱腌忄 RPC 戾踵龛琥."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "锐赅蝈 腓 溧 蝈耱忄蝈 磬耱痤殛栩?"
+msgid "Detected hardware"
+msgstr "悟牮栩 踵痄箦"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "橡钼屦赅 磬 磬耱痤殛囹"
+msgid "Mauritius"
+msgstr "锑怵桷栝"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "枢犏 蜩嵇 磬 桤镱腌忄龛 TV ?"
+msgid "Myanmar (Burmese)"
+msgstr "锑轫爨 (徼痨囗耜)"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
+msgid "Enabling swap partition %s"
+msgstr "朽琊屮噔 swap %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-"K铎稔蝥疣 忤 祛驽 噔蝾爨蜩黜, 溧 怆彗 X 镳 耱囵蜩疣礤.\n"
-"锐赅蝈 腓 X 溧 皴 耱囵蜩疣, 觐汔蝾 疱耱囵蜩疣蝈 耔耱屐囹?"
+"爨 FAT 腩忮 玎 桤镱腌忄礤 赅蝾 loopback (桦 爨 漕耱囹眍 耱 磬 "
+"滂耜)"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X 镳 耱囵蜩疣礤 磬 耔耱屐囹"
+msgid "Armenian (old)"
+msgstr "鲤戾眈赅 (耱囵)"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 漯嚅忮: %s\n"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"橡桧蝈 桁 \"%s\" 忮麇 聱耱怏忄 %s.\n"
+"助觏弪 \"橡艴恸痣鑌", 玎 溧 泐 镳彗囡桫弪.\n"
+"填驽蝈 聱 蜞赅 溧 磬镨蝈 眍忸 桁 桦 溧 镳铒篑眚 镳桧蝈疣."
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 聱疴: %s\n"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "磬戾疱蝈 疱龛 磬 忄蝈 镳钺脲扈 镱漯赅蜞 磬 MandrakeSoft"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "朽玟咫栩咫磬 耧铖钺眍耱: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ", 躅耱 \"%s\", 镱痱 %s"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "您脶铟桧 磬 鲡弪: %s\n"
+msgid "Monaco"
+msgstr "填磬觐"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "灭圄梓磬 镟戾: %s kB\n"
+msgid "%s formatting of %s failed"
+msgstr "%s 纛痨囹桊囗 铗 %s 镳钼嚯屙"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "灭圄梓磬 赅痱: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "湾篑镥 疣玟咫礤 磬: %s"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "洛痱桕嚯眍 铒疱耥忄礤 磬 祛龛蝾疣: %s\n"
+msgid "Canada (cable)"
+msgstr "枢磬溧 (赅徨)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "疹痂珙眚嚯磬 耔眭痤龛玎鲨 磬 祛龛蝾疣: %s\n"
+msgid "Upgrade"
+msgstr "吾眍忄礤"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "填龛蝾: %s\n"
+msgid "Workstation"
+msgstr "朽犷蝽 耱囗鲨"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "玉蝠铋耱忸 磬 扈囹: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"软耱嚯桊囔 镟赍 %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "诣 扈: %s\n"
+msgid "Kyrgyzstan"
+msgstr "疏疸桤蜞"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "诣 觌噔栲蝮疣: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr " 徉珙忄 漕牦戾眚圉 (镳屣铕忄 皴!)"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "物鲨: %s"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacrton - 镥痂钿梓眍 桤嵇腠忄礤 磬 觐爨礓 镱 疣顼桉囗桢."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "耱 磬 祛眚桊囗: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"茵徕 溧 桁囹 root-.\n"
+"青蝾忄 聱玟嚅蝈 (桦 鳅觏弪 磬 聱耱怏忄).\n"
+"翌汔忄 桤徨疱蝈 溴轳蜮桢 ``耱 磬 祛眚桊囗'' 泐 耠铈弪 `/'"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Server: "
-msgstr "漾疴: "
+msgid "Proxy should be http://..."
+msgstr "Proxy-聱疴 蝠徕 溧 http://..."
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL 蝠徕 溧 玎镱麾 http:// 桦 https://"
+msgid "South Africa"
+msgstr "捩磬 吏痂赅"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "填 恸忮溴蝈 WebDAV 聱疴 URL"
+msgid "Western Sahara"
+msgstr "青镟漤 燕踵疣"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mount point"
-msgstr "耱 磬 祛眚桊囗"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Server"
-msgstr "漾疴"
+msgid "Modify printer configuration"
+msgstr "项镳噔 磬耱痤殛栩 磬 镳桧蝈"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount"
-msgstr "填眚桊嚅"
+msgid "Choose a partition"
+msgstr "如徨疱蝈 "
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unmount"
-msgstr "腻祛眚桊嚅"
+msgid "Edit current rule"
+msgstr "绣溧牝桊 蝈牦蝾 镳噔桦"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New"
-msgstr "皖"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "蚂羼蝾 蝾忄 桤镱腌忄轵 ``%s''"
+msgid "Please test the mouse"
+msgstr "填, 镳钺忄轵 扈囹 耔"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Type"
-msgstr "妈"
+msgid "Other Media"
+msgstr "酿筱 眍耔蝈"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "销疴 桤镱腌忄轵 '腻祛眚桊囗'"
+msgid "Backup system files"
+msgstr "绣珏疴眍 觐镨 磬 耔耱屐龛 羿殡钼"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Delete"
-msgstr "如蝠栝"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Create"
-msgstr "漾玟嚅"
+msgid "Sector"
+msgstr "彦牝铕"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "妈漕忮 羿殡钼 耔耱屐:"
+msgid "Qatar"
+msgstr "枢蜞"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Empty"
-msgstr "橡噻屙"
+msgid "LDAP Base dn"
+msgstr "LDAP 拎珙 dn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"湾 祛驽蝈 溧 铖蜞忤蝈 镟赍蜞 礤爨痍桊囗, 玎蝾 爨蝈 耱 溧 泐 "
+"桧耱嚯桊囹"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "项溷铗忤 滂耜弪 玎 噔蝾爨蜩黜 桧耱嚯圉"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Dialing mode"
+msgstr "绣骅 磬 磬徼疣礤"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "File sharing"
+msgstr "项溴礤 磬 羿殡钼"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "企痦嚯磬 FS"
+msgid "Clean /tmp at each boot"
+msgstr "项麒耱忄礤 磬 /tmp 镳 怦觐 玎疱驿囗"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Malawi"
+msgstr "锑豚忤"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "湾 磬戾疱 蜮 滂耜"
+msgid "Please choose your type of mouse."
+msgstr "填, 桤徨疱蝈 蜩 磬 扈囹."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please click on a partition"
-msgstr "填, 鳅觏弪 磬 豚"
+msgid "class of hardware device"
+msgstr "觌囫 踵痄箦痦 篑蝠铋耱忸"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"褥囹 邃桧 泐 FAT 隲n"
-"(镱 镳桧鲨 皴 镱腌忄 铗 Microsoft Dos/Windows).\n"
-"橡邃豚汔 嵇疴 溧 镳铎屙栩 泐脲扈磬蜞 磬 蝾玷 隲n"
-"(嚓礤蝈 恸瘐 礤泐, 耠邃 蝾忄 嚓礤蝈 恸瘐 \"橡铎屙 泐脲扈磬蜞\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "如徨疱蝈 溴轳蜮桢"
+"翌忄 襦 爨龛蝈 祓彐栩 玎 觐栩 腩赅腠 疋玎龛蝈 镳桧蝈痂  狷溧 "
+"漕耱龛:"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Wizard"
-msgstr "锑泓铖龛"
+msgid "United Kingdom"
+msgstr "理汶"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"狸 耢蜞蝈 溧 桤镱腌忄蝈 aboot, 铖蜞忮蝈 疋钺钿眍 镳铖蝠囗耱忸 (2048 "
-"皴牝铕郳n"
-"襦 漕耱囹龛) 磬鬣腩蝾 磬 滂耜"
+msgid "running"
+msgstr "耱囵蜩疣礤"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "销疴 聱玟嚅蝈 backup 磬 疋铊蝈 溧眄"
+msgid "default"
+msgstr "镱 镱漯噌桊囗"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "橡铟弪弪 忭桁囹咫眍 !"
+msgid "Indonesia"
+msgstr "软漕礤玷"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "孰 玎 牮栾蜩疣礤 (铗眍忸)"
+msgid "France [SECAM]"
+msgstr "责囗鲨 [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "孰 玎 牮栾蜩疣礤"
+msgid "restrict"
+msgstr "钽疣龛麒"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "孰钼弪 玎 牮栾蜩疣礤 礤 聱怙噤囹"
+msgid "must have"
+msgstr "眢驽"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"署栾蜩疣 觌 镳尻嚯屙 镳铖 (蝠徕 溧 狷溴 潸脬 镱礤 %d 耔焘铍)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "如犷 磬 牮栾蜩疣 觌 玎 遴蜞 羿殡钼 耔耱屐"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "署栾蜩疣 觌 玎 羿殡钼 耔耱屐"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "妈: "
+"CUPS 礤 镱滗驵 镳桧蝈痂 磬 Novell 聱疴 桦 镳桧蝈痂 桤镳帙帙 溧眄 恸 "
+"疋钺钿眍-桤沭噤屙 觐爨礓.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "磬 赅磬 %d id %d\n"
+msgid "Senegal"
+msgstr "彦礤汔"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "诣 磬 蜞犭桷囹 腩忮: %s\n"
+msgid "Command line"
+msgstr "暑爨礓屙 疱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-滂耜钼 %s\n"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"袜蝈 嵇腠 疱龛, 赅牝 耧弼栲腠 镳邃腩驽龛 磬 镳钿箨蜩 漯筱 "
+"\"豚觐祚蜮郳" 襦 漕耱龛 磬 'e-桤蝾黜桕':"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "软纛痨圉: "
+msgid "access to administrative files"
+msgstr "漕耱 漕 羿殡钼 玎 噤扈龛耱痂疣礤"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "缅铎弪痂: %s 鲨腓礓痂, %s 汶噔, %s 皴牝铕鑌n"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "朽珈屦: %s\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 磬 磬 镟疣脲脲 镱痱 \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-only"
-msgstr "燕祛 玎 麇蝈礤"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Device: "
-msgstr "玉蝠铋耱忸: "
+msgid "Montserrat"
+msgstr "填眈屦囹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "Automatic dependencies"
msgstr ""
-"\n"
-"亦玷 耧弼栲腠 耱囵蜩疣\n"
-"桠桷 磬 豚 玎 溻铋眍\n"
-"耱囵蜩疣礤 磬 耔耱屐囹 忤.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"洛痤蝽 蝾玷 溧 錦n"
-"酿嚅忮-, 祛驽 徼 蝠徕郳n"
-"蝠徕 溧 泐 铖蜞忤蝈.\n"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "褥 磬 loopback 羿殡: %s"
+msgid "Connecting to the Internet "
+msgstr "砚玮囔 皴 犏 软蝈痦弪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-滂耜钼 %s\n"
+msgid "Restore Other"
+msgstr "满珩蜞眍忤 漯筱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "朽珈屦 磬 镟瘅弪 %s\n"
+msgid "TV card"
+msgstr "TV 赅痱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "丸忸 %s\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "橡桧蝈 磬 SMB/Windows 95/98/NT 聱疴"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid ", "
msgstr ""
-", 觐轵 皴 耱囵蜩疣 镱 镱漯噻徼疣礤\n"
-" (玎 MS-DOS boot, 礤 玎 lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Loopback 羿殡(钼):\n"
-" %s\n"
+"鲤泱戾眚: (umask)\n"
+"\n"
+"玉蜞眍忄 玎 root umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Remove selected host/network"
+msgstr "如蝠桠囗 磬 桤狃囗 躅耱/祓彐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "填眚桊囗\n"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix Main Transport Agent (MTA), 觐轵 镳钽疣爨 觐蝾 镳屙囫\n"
+"镱 铗 爨磬 磬 爨磬."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Not formatted\n"
-msgstr "湾纛痨囹桊囗\n"
+msgid "Disconnection from the Internet failed."
+msgstr "朽珀圜忄礤蝾 铗 软蝈痦弪 礤篑镥"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "灶痨囹桊囗\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"殷 祛驽 溧 桤徨疱蝈 觌噔桫 桦 觌噔桫磬 觐灬桧圉, 觐蝾 \n"
+" 忤 镱玮铍 溧 桤徼疣蝈 疣珉梓龛 觌噔栲蝮痦 镱漯邃徼\n"
+"(磬镳. latin 礤 latin)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "悟 鲨腓礓 %d 漕 鲨腓礓 %d\n"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "袜耱痤殛 磬 祓彐囹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s 皴牝铕"
+msgid "if set to yes, reports check result to tty."
+msgstr "嚓 玎溧屙 溧, 桤镳帙 疱珞腧囹 铗 镳钼屦赅蜞 磬 tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "朽珈屦: %s"
+msgid "Restore From CD"
+msgstr "满珩蜞眍忄 铗 CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "袜鬣腩: 皴牝铕 %s\n"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"袜 嵇 耱 溧 磬耱痤栩 觐祜 耔 蜞赅, 麇 溧 镱溴 软蝈痦弪 怵赅蜞\n"
+"耔. 蜞玷 恸珈铈眍耱, 漯筱 觐祜痂 腩赅腠囹 忤 祓彐  祛汔 溧\n"
+"桤镱腌忄 软蝈痦弪 怵赅蜞 磬 蝾玷 觐祜.\n"
+"\n"
+"俞邃弪 皴, 麇 忤 耱 觐眙桡箴桊嚯 忄蜞 甜彐/软蝈痦弪 漕耱 "
+"桤镱腌忄殛 drakconnect 镳邃 溧 镳噔栩 漯筱.\n"
+"\n"
+"悟徨脲驽蝈: 蝠徕 忤 铗溴脲 玎 蝾忄 祓彐钼 噤囡蝈, 玎 溧 篑蜞眍忤蝈 "
+"恸蝠屮磬蜞 耔 祓彐 (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Name: "
-msgstr "褥: "
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "填, 桤徨疱蝈 觐 祓彐钼 噤囡蝈 溧 桤镱腌忄 玎 怵赅 犏 软蝈痦弪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "馏赈 磬 篑蝠铋耱忸蝾 镱 DOS: %s (镳铖蝾 镳邃镱腩驽龛)\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr " %s 皴汔 桤忮耱屙 赅蝾 %s"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Removing %s"
-msgstr "如蝠桠囗 磬 %s"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 祛戾眚 桤觌屙."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "暑镨疣礤 磬 %s"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "橡屐羼蜩 羿殡钼弪 磬 眍 "
+msgid "Latin American"
+msgstr "肃蜩眍囔屦桕囗耜"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"蔫疱牝铕蜞 %s 忮麇 聱潸疰 赅赈 溧眄鑌n"
-"(%s)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "橡铎磬 耔耱屐囹 玎 镥鬣"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hide files"
-msgstr "殃痂 羿殡钼弪"
+msgid "Old device file"
+msgstr "羊囵 羿殡 磬 篑蝠铖蜮"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "橡屐羼蜩 羿殡钼弪 磬 眍 "
+msgid "Info: "
+msgstr "软纛痨圉: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "央邃 纛痨囹桊囗 磬 豚 %s, 怦梓觇 溧眄 恸瘐 礤泐  狷溧 玎泱徨龛"
+msgid "Button `%s': %s"
+msgstr "馏蝾 `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "茵徕 溧 疱耱囵蜩疣蝈, 镳邃 镳铎屙栩 溧 怆玎 耔豚"
+msgid "Please wait"
+msgstr "填 桤鬣赅轵"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "亦犭桷囹 磬 腩忮蝈 磬 篑蝠铋耱忸 %s  狷溴 玎镨襦磬 恸瘐 滂耜 !"
+msgid "Genius NetMouse"
+msgstr "Genuis NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "相赍 %s 礤钺躅滂. 泥 泐 桧耱嚯桊囔?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "妙蝾忸"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "What type of partitioning?"
-msgstr "枢犏 蜩 疣玟咫礤 磬 腩忮 ?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "埋梓觐 镳噔桦眍 腓 ?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "马桁囗桢: 蜞玷 铒屦圉 铒囫磬"
+msgid "Ethernet Card"
+msgstr "Ethernet 赅痱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "chunk size"
-msgstr "泐脲扈磬 磬 镟瘅弪"
+msgid "Info"
+msgstr "软纛痨圉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "level"
-msgstr "龛忸"
+msgid "Install"
+msgstr "软耱嚯桊嚅"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "device"
-msgstr "篑蝠铋耱忸"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"助觏弪 磬 \"%s\", 嚓 桉赅蝈 溧 桤蝠桢蝈 怦梓觇 溧眄 鑌n"
+"腩忮 聱耱怏忄 磬 蝾玷 蜮 滂耜. 马桁囗桢, 耠邃 鳅赅礤 磬 \"%s\", "
+"爨 溧 祛驽蝈 溧 恸珩蜞眍忤蝈 赅赈栩 溧 徼腩 溧眄 腩忮 聱耱怏忄 "
+"磬 蝾玷 蜮 滂耜,\n"
+"怅膻麒蝈腠 赅赈栩 溧 Windows 溧眄.\n"
+"\n"
+"助觏弪 \"%s\", 玎 溧 铗戾龛蝈 蜞玷 铒屦圉 徨 玎泱徉 溧 溧眄栩 鑌n"
+"腩忮蝈 聱耱怏忄 磬 蝾玷 蜮 滂耜."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Various"
-msgstr "朽珉梓龛"
+msgid "Exit install"
+msgstr "如躅 铗 桧耱嚯圉桀眄囹 镳钽疣爨"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Mount options"
-msgstr "物鲨 玎 mount:"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"埋梓觐 磬耱痤屙.\n"
+"彦汔 祛驽蝈 溧 耧钿咫栩 软蝈痦弪 怵赅蜞 耔 漯筱 觐祜痂 腩赅腠囹 "
+"忤 祓彐 桤镱腌忄殛 噔蝾爨蜩黜 祓彐钼 磬耱痤殛 (DHCP)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "脏殡 忮麇 聱耱怏忄. 泥 泐 桤镱腌忄 腓 ?"
+msgid "Remote CUPS server"
+msgstr "悟溧脲麇 CUPS 聱疴"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "脏殡 忮麇 皴 桤镱腌忄 蝾 漯筱 loopback, 桤徨疱蝈 漯筱 羿殡."
+msgid "Sun - Mouse"
+msgstr "惕 磬 Sun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give a file name"
-msgstr "泥轵 桁 磬 羿殡"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+" 耔耱屐囹 忤 桁 襦祛 邃桧 磬耱痤屙 祓彐钼 噤囡蝈:\n"
+"\n"
+"%s\n"
+"\n"
+"鸯蜞 溧 篑蜞眍 腩赅腠囹 忤 祓彐 磬 蝾玷 噤囡蝈."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "妈 羿殡钼 耔耱屐: "
+msgid "Minimal install"
+msgstr "惕扈磬腠 桧耱嚯圉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "妙脲扈磬 MB: "
+msgid "Ethiopia"
+msgstr "膨桀镨"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "褥 磬 loopback 羿殡: "
+msgid "Devanagari"
+msgstr "泥忮磬滏囵"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "翌玷 礤 祛驽 溧 狷溴 桤镱腌忄 玎 loopback"
+msgid "Total size: %d / %d MB"
+msgstr "吾 泐脲扈磬: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM name?"
-msgstr "LVM 桁 ?"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "桤觌"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "眍"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "祟赅脲 镳桧蝈"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "如徨疱蝈 聱耱怏忄 LVM 玎 镳栳噔礤"
+msgid "Disabling servers..."
+msgstr "如觌忄礤 磬 聱疴 ..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "如徨疱蝈 聱耱怏忄 RAID 玎 镳栳噔礤"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "填, 桤徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Moving partition..."
-msgstr "体耱 豚 ... "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "软耱嚯圉蜞 磬 %s 镳钼嚯屙. 项忤 皴 耠邃磬蜞 沭屮赅:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Moving"
-msgstr "体耱屙"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "湾 祛汔 溧 耱囵蜩疣 mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "袜 觐 皴牝铕 桉赅蝈 溧 泐 镳屐羼蜩蝈?"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"如狃嚯 耱 耠邃龛(蝈) 聱疴(): %s\n"
+"\n"
+"\n"
+"义玷 聱疴 皴 嚓蜩忤疣 镱 镱漯噻徼疣礤. 义 爨 桤忮耱龛 镳钺脲扈 聱馶n"
+"耔泱痦铖蝌, 眍 祛驽 溧 皴 磬戾 眍忤. 蝾玷 耠篦嚅,  蝠徕 溧 耱錦n"
+"耔泱痦, 麇  磬溷疣驿囹 恸珈铈眍 磬-狷痃.\n"
+"\n"
+"\n"
+"袜桉蜩磬 腓 桉赅蝈 溧 桧耱嚯桊囹 蝈玷 聱疴 ?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Sector"
-msgstr "彦牝铕"
+msgid "Network printer (TCP/Socket)"
+msgstr "甜彐钼 镳桧蝈 (TCP/Socket)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "袜 觐 滂耜 桉赅蝈 溧 泐 镳屐羼蜩蝈 ?"
+msgid "Backup User files..."
+msgstr "绣珏疴眍 觐镨 磬 镱蝠遽栩咫耜 羿殡钼..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Move"
-msgstr "橡屐羼蜩"
+msgid "Install system"
+msgstr "软耱嚯桊囗 磬 耔耱屐囹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New size in MB: "
-msgstr "皖忄 泐脲扈磬 MB: "
+msgid "First DNS Server (optional)"
+msgstr "销疴 DNS 聱疴 (镱 桤犷)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "如徨疱蝈 眍忄 泐脲扈磬"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"离蝈痦囹桠眍, 忤 祛驽 溧 玎溧溴蝈 桁 磬 篑蝠铋耱忸/羿殡 桤躅漤 疱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Resize"
-msgstr "橡铎屙 泐脲扈磬蜞"
+msgid "dhcpd Config..."
+msgstr "袜耱痤殛 磬 dhcpd..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"央邃 镳铎磬 泐脲扈磬蜞 磬 豚 %s, 溧眄鑤e 恸瘐 礤泐  狷溧 玎泱徨龛"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "玉蜞眍怅囹 忮麇 磬镳噔屙, 眍 祛戾眚 桤觌屙."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "埋梓觇 溧眄 磬 蝾玷 蝠徕 溧 狷溧 囵蹊忤疣龛"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub 桧耱嚯圉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "妙脲扈磬蜞 磬 豚 礤 祛驽 溧 狷溴 镳铎屙屙"
+msgid "Israeli"
+msgstr "如疣咫耜"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "如麒耠忄 沭囗桷栩 磬 fat 羿殡钼囹 耔耱屐"
+msgid "load setting"
+msgstr "篑蜞眍忄礤 磬 磬蝾忄疴囗"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "竖溴 桉赅蝈 溧 祛眚桊囹 篑蝠铋耱忸 %s ?"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "橡桧蝈 \"%s\" 磬 聱疴 \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"湾 祛汔 溧 爨蹴 蝾麝囹 磬 祛眚桊囗, 蝥 赅蝾 膪 皴 桤镱腌忄 玎 "
-"loopback.\n"
-"销疴 爨蹴弪 loopback"
+msgid "Floppy can be removed now"
+msgstr "噪铒栩 祛驽 溧 狷溴 桤忄溴眍 皴汔"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "竖溴 桉赅蝈 溧 祛眚桊囹 篑蝠铋耱忸 %s ?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "惕扈磬腠 桧耱嚯圉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "竖溴 桉赅蝈 溧 祛眚桊囹 loopback-羿殡 %s ?"
+msgid "Denmark"
+msgstr "泥龛"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "橡艴钿 铗 ext2 犏 ext3"
+msgid "Moving partition..."
+msgstr "体耱 豚 ... "
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "暑 羿殡钼 耔耱屐 桉赅蝈 ?"
+msgid "(This) DHCP Server IP"
+msgstr "(翌玷) DHCP 聱疴 IP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "橡铎磬 蜩镟 磬 豚"
+msgid "Test of the configuration"
+msgstr "橡钼屦赅 磬 磬耱痤殛囹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Installing %s ..."
+msgstr "软耱嚯桊 %s ..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"央邃 镳铎磬 磬 蜩镟 磬 豚 %s, 怦梓觇 溧眄 恸瘐 礤泐  狷溧 玎泱徨龛"
+"袜牮, 玎忤耔祛耱 铗 桤犷疣 忤 溧腓 溧 桤徼疣蝈 镟赍蜩 邃桧 镱 邃桧, \n"
+"忤 狷溴 镳邃耱噔屙 潸疴 聱潸疰帙 怦梓觇 镟赍蜩 镱漯邃屙 镱 沭箫 鑌n"
+"镱漯沭箫. 念赅蝾 钺躅驿囹 潸疴铗, 祛驽蝈 溧 桤徨疱蝈 鲥腓 沭箫, "
+"镱溷痼镨\n"
+"桦 铗溴腠 镟赍蜩.\n"
+"\n"
+"暑汔蝾 镱耦麒蝈 镟赍 铗 潸疴铗,  皴 镱忤 铒桉囗桢 怃耥. 暑汔蝾\n"
+"桤犷瘊 镳桕膻麇, 鳅觏弪 狍蝾磬 \"软耱嚯桊嚅\", 觐轵  矬耥 镳铞羼郳n"
+"磬 桧耱嚯圉. 玎忤耔祛耱 铗 耜铕铖蝌 磬 踵痄箦疣 忤 狃 磬 镟赍蜩蝈,\n"
+"觐栩 桉赅蝈 溧 狷溧 桧耱嚯桊囗, 镳铞羼 祛驽 溧 铗礤戾 桤忮耱眍 怵屐.\n"
+"西嚓忄眍蝾 怵屐 玎 镳桕膻麾囗 磬 镳铞羼, 麇 狷溴 镱赅玎眍 磬 尻疣蜞, 玎\n"
+"溧 忤 镱祛沩 溧 镳弼屙栩 溧腓 桁囹 漕耱囹眍 怵屐 溧 皴 磬耠噤栩 磬\n"
+"鬣 赅翦.\n"
+"\n"
+"!! 狸 桤狃囗 聱疴屙 镟赍, 徼腩 蝾 箪桫脲眍 桦 玎蝾 鬣耱 铗 豚\n"
+"沭箫,  狷溴蝈 镱祛脲龛 玎 镱蜮驿屙桢, 麇 磬桉蜩磬 桉赅蝈 蝾玷 聱疴\n"
+"溧 狷溴 桧耱嚯桊囗. Mandrake Linux, 怦梓觇 聱疴 蝠忄 镱 "
+"镱漯噻徼疣礤\n"
+"镳 玎疱驿囗.泥驽 嚓 襦 耔泱痦 爨 桤忮耱龛 镳钺脲扈, 觐汔蝾\n"
+"滂耱痂狍鲨蜞 皴 疣顼痤耱疣忄, 祛驽 溧 皴 耠篦 蜞赅, 麇 溧 皴 镱騖n"
+"潴镪 耔泱痦铖蝌, 耠邃 赅蝾 忮瘃蜞 磬 Mandrake Linux 玎恸瘌屙. 狸頫n"
+"礤 珥噱蝈 玎 赅赈 耠箧 铒疱溴脲磬 篑塍汔 桦 玎 桧耱嚯桊囗, 鳅觏弪錦n"
+"\"湾\". 鳅赅礤 磬 \"泥\"  桧耱嚯桊囹 桤狃铄龛 篑塍汨 蝈  狷溧騖n"
+"耱囵蜩疣龛 噔蝾爨蜩黜 镱 镱漯噻徼疣礤. !!\n"
+"\n"
+"物鲨蜞 \"棱蝾爨蜩黜 玎忤耔祛耱鑌" 桤觌忄 镳邃箫疱滂蝈腠栩 滂嚯铉,\n"
+"觐汔蝾 桧耱嚯囹铕 噔铎囹梓眍 疱 桤徨疱 镟赍. 翌忄 皴 耠篦忄, 玎蝾\n"
+" 疱, 麇 皴 眢驿噱 溧 玎漕忸腓 玎忤耔祛耱 漯筱 镟赍, 玎 溧 镳桕膻麒\n"
+"篑镥 桧耱嚯圉蜞.\n"
+"\n"
+"锑腙囹 桕铐赅 磬 滂耜弪赅 潸眍蝾 磬 耧桉 镱玮铍忄 溧 玎疱滂蝈 耧桉\n"
+" 镟赍蜩 铗 镳邃桫磬 桧耱嚯圉. 狸 鳅觏弪 磬 蜞玷 桕铐赅,  狷溴蝈\n"
+"镱祛脲龛 溧 怅囵囹 滂耜弪 聱玟噤屙 镳邃 蝾忄 牮 磬 漯筱 "
+"桧耱嚯圉.\n"
+"妈骝 怛铕囹 镱漶赅珀 镱 怵屐 磬 镱耠邃磬蜞 耱赅, 玎 蝾忄 赅 溧\n"
+"聱玟噤弪 蜞赅忄 滂耜弪."
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "泥 镳屐圊磬 腓 loopback 羿殡 ?"
+msgid "Choose your filesystem encryption key"
+msgstr "如犷 磬 牮栾蜩疣 觌 玎 遴蜞 羿殡钼 耔耱屐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Preference: "
-msgstr "橡邃镱麒蜞龛: "
+msgid "Andorra"
+msgstr "理漕疣"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "袜鬣脲 皴牝铕: "
+msgid "Sierra Leone"
+msgstr "谚屦 隋铐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "漾玟嚅 眍 "
+msgid "Botswana"
+msgstr "令蝰忄磬"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Use for loopback"
-msgstr "如镱腌忄 玎 loopback"
+msgid "(default value: %s)"
+msgstr "(镱漯噻徼疣 耱铋眍耱: %s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "填滂翳鲨疣 RAID"
+msgid "Alternative test page (Letter)"
+msgstr "离蝈痦囹桠磬 蝈耱钼 耱疣龛鲟 (翔耢)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove from LVM"
-msgstr "橡屐圊龛 铗 LVM"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "橡屐圊龛 铗 RAID"
+msgid "Choose an X server"
+msgstr "如徨疱蝈 X 聱疴"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "橡栳噔 犏 LVM"
+msgid "Swap partition size in MB: "
+msgstr "妙脲扈磬 磬 swap-豚 MB: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "橡栳噔 犏 RAID"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format"
-msgstr "灶痨囹桊嚅"
+msgid "No changes to backup!"
+msgstr "爨 镳铎屙 玎 疱珏疴眍 觐镨!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "项漯钺磬 桧纛痨圉"
+msgid "Formatted\n"
+msgstr "灶痨囹桊囗\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "物栩忄 皴 溧 耧囫 蜞犭桷囹 磬 腩忮蝈"
+msgid "Type of install"
+msgstr "诣 桧耱嚯圉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"央铈弪 滂耜弪 恸 綦铒栩頫n"
-"埋梓觇 溧眄, 磬扈疣 皴 恸瘐 滂耜弪囹,  狷溧 玎泱徨龛"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "橡桧蝈 \"%s\" 磬 SMB/Windows 聱疴 \"%s\""
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Warning"
-msgstr "橡邃箫疱驿屙桢"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select file"
-msgstr "如徨疱蝈 羿殡"
+msgid "%d comma separated numbers"
+msgstr "%d 聱 玎镥蜞 疣玟咫屙 眍戾疣"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"绣珏疴磬蜞 蜞犭桷 磬 腩忮蝈 礤 聱 聱蜞 泐脲扈磬\n"
-"泥 镳钿驵 腓 怦 镟 ?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "棱蝾爨蜩黜 祛眚桊囗 磬 耢屙屐 眍耔蝈"
+"rusers 镳铗铌铍 镱玮铍忄 磬 祓彐钼栩 镱蝠遽栩咫 溧 镳钼屦忄 觐 錦n"
+"怆琥 磬 漯筱 铗泐忄蜞 爨磬."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Reload partition table"
-msgstr "橡彗囵邃 蜞犭桷囹 腩忮蝈"
+msgid "Automatic Steps Configuration"
+msgstr "袜耱痤殛 磬 噔蝾爨蜩黜栩 耱觇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Rescue partition table"
-msgstr "扬囫忄礤 蜞犭桷囹 腩忮蝈"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"枢赈 桉赅蝈 溧 珥噱蝈 镱忮麇 玎 钺铖蝌 磬 悟忸疱龛 桤躅溴 觐? 码彗蝈 "
+" 疋弪 磬 砚钺钿龛 杨趄箦"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "满珩蜞眍忤 蜞犭桷囹 腩忮蝈"
+msgid "Barbados"
+msgstr "拎疳噤铖"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "青镟玷 蜞犭桷囹 腩忮蝈"
+msgid "Please select data to backup..."
+msgstr "填, 桤徨疱蝈 溧眄 玎 疱珏疴眍 觐镨..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"狸 桉赅蝈 铢 腩忮, 祛 桤蝠栝蝈 邃桧, 玎 溧 祛驽蝈 溧 聱玟噤弪 邃桧 "
-"疣瑛桊屙 "
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "湾 祛汔 溧 漕徉 镱忮麇 腩忮"
+"吗赅蜞 镳铒噤磬.\n"
+"橡钼屦弪 耔 觐眙桡箴圉蜞 暑眚痤脲 鲥眚 磬 Mandrake."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "埋梓觇 嵇疴梓龛 腩忮 皴 桤镱腌忄"
+msgid "received"
+msgstr "镱塍麇龛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Hard drive information"
-msgstr "软纛痨圉蜞 玎 蜮滂 滂耜"
+msgid "/File/_New"
+msgstr "/脏殡/_皖"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "棱蝾爨蜩黜 聱玟噔囗"
+msgid "The DNS Server IP"
+msgstr "DNS 聱疴 IP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Clear all"
-msgstr "如麒耱 怦梓觐"
+msgid "IP Range End:"
+msgstr "署嚅 磬 IP 钺踱囹:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "锐赅蝈 腓 溧 玎镟玷蝈 镳铎屙栩 /etc/fstab"
+msgid "High"
+msgstr "妈耦觐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "如躅, 徨 溧 玎镨 磬 蜞犭桷囹 磬 腩忮蝈 ?"
+msgid "NoVideo"
+msgstr "铃 沭圄桕"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "如躅 徨 玎镨"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "翌忄 镱脲 铒桉忄 篑蝠铋耱忸蝾"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "橡钿驽龛 恸镳尻 怦梓觐 ?"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "念徉礤 磬 镳桧蝈 磬 Star Office/OpenOffice.org/GIMP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "橡屐桧 抨耧屦蝈 疱骅"
+msgid "Local Printers"
+msgstr "祟赅腠 镳桧蝈痂"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "橡屐桧 皖痨嚯屙 疱骅"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (桧耱嚯圉 沭圄梓屙 漯嚅忮)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Undo"
-msgstr "满痦"
+msgid "NIS Server"
+msgstr "NIS 聱疴"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Exit"
-msgstr "如脲"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "项痱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "如徨疱蝈 "
+msgid "Spain"
+msgstr "锐镟龛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "如徨疱蝈 漯筱 "
+msgid "This user name has already been added"
+msgstr "翌忄 镱蝠遽栩咫耜 桁 忮麇 漕徉忮眍"
-#: ../../diskdrake/removable.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Change type"
-msgstr "橡铎龛 蜩镟"
+msgid "Choose a file"
+msgstr "如徨疱蝈 羿殡"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search servers"
-msgstr "寅瘃 聱疴"
+msgid "Apply"
+msgstr "橡桦铈"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "念戾轫"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "如镱腌忄 噔蝾爨蜩黜 玎耔鬣礤"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Username"
-msgstr "项蝠遽栩咫耜 桁"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 桤觌屙."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"填, 恸忮溴蝈 忄蝾 桁, 镟痤豚 桁 磬 漕戾轫 玎 漕耱 漕 蝾玷 躅耱."
+msgid "San Marino"
+msgstr "燕 锑痂眍"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "如桉赈 蠕屙蜩翳赅鲨 玎 念戾轫"
+msgid "Belgium"
+msgstr "铃脬"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Another one"
-msgstr "酿筱"
+msgid "Kuwait"
+msgstr "鼠忮轵"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which username"
-msgstr "暑 镱蝠遽栩咫耜 桁"
+msgid "Choose the window manager to run:"
+msgstr "如徨疱蝈 戾龛滏 磬 镳铉铕鲨 玎 耱囵蜩疣礤:"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "湾 祛汔 溧 怆玎 赅蝾 桤镱腌忄 桁 %s (沭屮磬 镟痤豚?)"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "First Time Wizard"
+msgstr "念狃 漕 嵇疴铐圜嚯龛 镱祛桕"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus 觐眚痤脲痂"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"项忤 皴 沭屮赅, 眍 礤 珥囔 赅 溧 皴 耧疣 礤 溴腓赅蝽.\n"
+"填驽蝈 溧 镳钿骅蝈 磬 疋铋 痂耜."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "USB controllers"
-msgstr "USB 觐眚痤脲痂"
+msgid "please wait, parsing file: %s"
+msgstr "祛 桤鬣赅轵, 镳噔 疣玑铕 磬 羿殡: %s"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI 觐眚痤脲痂"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "USB 觐眚痤脲痂"
+msgid "Taiwan"
+msgstr "亦殁囗"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA 觐眚痤脲痂"
+msgid "Pakistan"
+msgstr "相觇耱囗"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Joystick"
-msgstr "逆铋耱桕"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Scanner"
-msgstr "殃屙屦"
+msgid "Permissions"
+msgstr "橡噔"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unknown/Others"
-msgstr "湾桤忮耱龛/酿筱"
+msgid "Provider name (ex provider.net)"
+msgstr "褥 磬 漕耱噔麒赅 (磬镳. provider.net)"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "琉桎骖忮 耔耱屐龛 觐眚痤脲痂"
+msgid "Version: %s\n"
+msgstr "洛瘃: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Modem"
-msgstr "填溴"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"锣蜞 耔耱屐 爨腙 疱耋瘃. 填驽 溧 桁囹 镳钺脲扈 桧耱嚯桊囗弪頫n"
+"磬 Mandrake Linux. 狸 皴 镱忤 镳钺脲 铒栩嚅蝈 蝈犟蝾忄蜞 桧襦豚鲨. "
+"青鲥腧,\n"
+"磬蜩耥弪 'F1', 觐汔蝾 耱囵蜩疣蝈 铗 CDROM 恸忮溴蝈 '蝈'."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet 赅痱"
+msgid "Use the Windows partition for loopback"
+msgstr "如镱腌忄 玎 Windows 膪 玎 loopback"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Processors"
-msgstr "橡铞羼铕"
+msgid "Armenian (typewriter)"
+msgstr "鲤戾眈赅 (镨 爨磬)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Connection type: "
+msgstr "诣 磬 怵赅蜞: "
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "氢箨钼 赅痱"
+msgid "Graphical interface"
+msgstr "灭圄梓屙 桧蝈痿嚅"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "酿筱 祗腧桁邃栝龛 篑蝠铋耱忄"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s 踵痄箦痦 3D 篑觐疱龛"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "TV 赅痱"
+msgid "India"
+msgstr "软滂"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Videocard"
-msgstr "妈溴 赅痱"
+msgid "Chad"
+msgstr "奏"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tape"
-msgstr "隋眚"
+msgid "Slovakia"
+msgstr "央钼嚓"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Singapore"
+msgstr "谚磴囡箴"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD 玎镨疋帙"
+msgid "Cambodia"
+msgstr "枢灬钿驵"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Monitor HorizSync: %s\n"
+msgstr "疹痂珙眚嚯磬 耔眭痤龛玎鲨 磬 祛龛蝾疣: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Disk"
-msgstr "蔫耜"
+msgid "Path"
+msgstr "销"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip 篑蝠铋耱忸"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy"
-msgstr "噪铒"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "湾赅 桤徨疣 漯嚅忮"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"橡桧蝈 %s\n"
+"枢赈 桉赅蝈 溧 镱镳噔栩 镱 蝾玷 镳桧蝈 ?"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "酿嚅忮: "
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "念徉忤 镱蝠遽栩咫"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8535,140 +8574,97 @@ msgstr ""
"\n"
"义牦 桤镱腌忄龛 漯嚅忮 玎 忄蜞 \"%s\" 玮箨钼 赅痱 \"%s\" "
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "如犷 磬 耠篦噱 漯嚅忮"
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"锐赅蝈 腓 溧 镱玮铍栩 磬 镱蝠遽栩咫 溧 镱溴 蝈蹴栩 滂疱牝铕梃?\n"
+"朽琊屮噔囗弪 磬 蝾忄  镱玮铍 磬 镱蝠遽栩咫栩 镳铖蝾 溧 鳅觏囹 磬 "
+"\"项溴\" konqueror 桦 nautilus.\n"
+"\n"
+"\"孰桢眚耜郳" 镱玮铍忄 玎 镱蝠遽栩咫 磬耱痤殛.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr "青蝠箐礤龛 镳 玮箨"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"填驽 桤徨疱蝈 玎疱驿囗 桦 玎镨 磬 桤犷疣 磬 镟赍蜩 磬 綦铒.\n"
+"灶痨囹 聱 赅蝾 auto_install 沐礤痂疣龛蝈 滂耜弪."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "灭屮赅: \"%s\" 漯嚅忮 玎 忄蜞 赅痱 桧耱嚯桊囗"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "湾桤忮耱屙 漯嚅忮"
+msgid "Use quota for backup files."
+msgstr "如镱腌忄 赈铗 玎 羿殡钼 磬 疱珏疴眍 觐镨."
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "爨 漯嚅忮 玎 忄蜞 玮箨钼 赅痱 (%s)"
+msgid "Configuring printer \"%s\"..."
+msgstr "袜耱痤殛 磬 镳桧蝈疣 \"%s\"..."
-#: ../../harddrake/sound.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No known driver"
-msgstr "爨 桤忮耱屙 漯嚅忮"
+msgid "Internet connection"
+msgstr "软蝈痦弪 怵赅"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"爨 疋钺钿屙 漯嚅忮 玎 忄蜞 玮箨钼 赅痱 (%s), 眍 桁 耦狁蜮屙 漯嚅忮 "
-"磬 \"%s\"."
+"青疱驿囗弪 磬 祛潴豚 %s 礤 篑.\n"
+"锐赅蝈 腓 溧 铒栩囹 铗眍忸 漯筱 镟疣戾蝠 ?"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No open source driver"
-msgstr ""
+msgid "Welcome to the Open Source world."
+msgstr "念狃 漕 疋弪 磬 悟忸疱龛 如躅溴 觐"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "填, 镱鬣赅轵 ... 橡桦嚆囗 磬 磬耱痤殛栩"
+msgid "Bosnia and Herzegovina"
+msgstr "令耥 斟瘀邈钼桧"
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Trouble shooting"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
+"腕驿噱蝈 皴 铗 桉蜩眈赅 羿殡钼 耔耱屐 (ext2, reiserfs,xfs, 桦 jfs) 玎 "
+"蜞玷 蝾麝 磬 祛眚桊囗錦n"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "填, 镳钺忄轵 扈囹 耔"
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"锣蜞 赅痱 祛戾眚 桤镱腌忄 %s\"%s\" 漯嚅忮 (镱漯噻徼疣 漯嚅忮 玎 "
-"赅痱囹 忤 \"%s\")"
+msgid "Netherlands"
+msgstr "疹豚礓"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"殷 祛驽 溧 桤徨疱蝈 嚯蝈痦囹桠屙 漯嚅忮 (OSS 桦 ALSA) 玎 忄蜞 玮箨钼 "
-"赅痱 (%s)."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "如镳帙囔 羿殡钼..."
-#: ../../harddrake/sound.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "袜耱痤殛 玎 玮箨"
+msgid "Internal ISDN card"
+msgstr "满蝠屮磬 ISDN 赅痱"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8679,1666 +8675,1634 @@ msgstr ""
"爨 桤忮耱礤 OSS/ALSA 嚯蝈痦囹桠屙 漯嚅忮 玎 忄蜞 玮箨钼 赅痱 (%s) "
"觐蝾 祛戾眚 桤镱腌忄 \"%s\""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr "爨 嚯蝈痦囹桠屙 漯嚅忮"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "enable radio support"
-msgstr "疣琊屮噔 镱漯赅 磬 疣滂"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Radio support:"
-msgstr "项漯赅 磬 疣滂:"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL 磬耱痤殛:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "Title"
+msgstr "青汶噔桢"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Tuner type:"
-msgstr "诣 磬 蝮礤:"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Card model:"
-msgstr "填溴 磬 赅痱:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "WARNING"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "湾桤忮耱屙|吾"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "湾桤忮耱屙|CPH06X (bt878) [祉钽 镳铊玮钿栩咫鑍"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "湾桤忮耱屙|CPH05X (bt878) [祉钽 镳铊玮钿栩咫鑍"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "棱蝾爨蜩黜 玎耔鬣礤"
+msgid "Installing bootloader"
+msgstr "软耱嚯桊囗 磬 bootloader"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do"
-msgstr "袜镳噔"
+msgid "replay"
+msgstr "镱怛铕"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "锣 桤犷 ? (镱 镱漯噻徼疣礤 %s)"
+msgid "detected %s"
+msgstr "玎皴麇磬 %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "祟 桤犷, 铒栩嚅蝈 铗眍忸\n"
+msgid "Virgin Islands (U.S.)"
+msgstr "妈痄骅眈觇 务蝠钼 (牙)"
-#: ../../interactive/stdio.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Bad backup file"
+msgstr "祟 backup-羿殡"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"=> 玎徨脲骊, 镳铎屙屙 弪桕弪:\n"
-"%s"
+"玉蜞眍怅囹 磬 扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 忮麇 玎恸瘌屙.\n"
+" 祛戾眚 桤觌屙.\n"
+"\n"
+"枢赈 桉赅蝈 溧 磬镳噔栩 ?"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> 褥 祉钽 礤 玎 桤犷 铗 (%s).\n"
-
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "锣 桤犷 ? (镱 镱漯噻徼疣礤 `%s'%s) "
+msgid "Pipe into command"
+msgstr "橡钽疣戾 赅磬 犏 觐爨礓"
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"奏耱 铗 踵痄箦疣 磬 觐祜 忤 皴 眢驿噱 铗 ``耦狁蜮屙栩 耔'' 漯嚅忮痂, "
+"玎 溧 疣犷蜩.\n"
+"填驽蝈 溧 磬戾痂蝈 镱忮麇 桧纛痨圉 玎 蝾忄 磬: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "锐赅蝈 腓 溧 鳅觏弪 磬 蝾玷 狍蝾?"
+msgid "Detecting devices..."
+msgstr "悟牮桠囗 磬 篑蝠铋耱忄 ..."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "馏蝾 `%s': %s"
+msgid "Click here to launch the wizard ->"
+msgstr "助觏弪 蝮, 玎 溧 耱囵蜩疣蝈 爨泓铖龛赅 ->"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "锣 桤犷 ? (镱 镱漯噻徼疣礤 `%s')"
+msgid "Haiti"
+msgstr "锗栩"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
msgstr ""
-"青镨耔蝈 觐栩 忤  蝠徕 溧 玎嵇腠栩:\n"
-"%s"
+"物桉囗桢 磬 镱脲蜞蜞:\n"
+"\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "桁弪 磬 镳铊玮钿栩咫 磬 篑蝠铋耱忸蝾"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"青疱驿囗弪 磬 祛潴豚 %s 礤 篑.\n"
-"锐赅蝈 腓 溧 铒栩囹 铗眍忸 漯筱 镟疣戾蝠 ?"
+msgid "Refreshing printer data..."
+msgstr "物疱耥忄礤 磬 溧眄栩 铗 镳桧蝈疣 ..."
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "Specify options"
-msgstr "青溧 铒鲨"
+msgid "You must also format %s"
+msgstr "妈 蝠徕 聱 溧 纛痨囹桊囹 %s"
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "棱蝾爨蜩黜 玎耔鬣礤"
+msgid "Be careful: this operation is dangerous."
+msgstr "马桁囗桢: 蜞玷 铒屦圉 铒囫磬"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-" 觐 耠篦噼, %s 漯嚅忮瘊 皴 眢驿噱 铗 漕嵇腠栩咫磬 桧纛痨圉, 玎\n"
-"溧 疣犷蜩 觐疱牝眍, 恸镳尻 麇 眍痨嚯眍 疣犷蜩 徨 礤. 棋豚弪 腓 "
-"溧镱溧溴蝈\n"
-"漕嵇腠栩咫龛 铒鲨 玎 礤泐 桦 溧 疣琊屮栩 磬 漯嚅忮疣 溧 镱蝥瘃 "
-"桧纛痨圉蜞\n"
-"铗 觐蝾 皴 眢驿噱 ? 项 镳桧鲨 蝾忄 祛驽 溧 玎徼 觐祜 忤, 眍 爨 溧 "
-"泐 镱怵邃."
+msgid "Insert a floppy containing package selection"
+msgstr "央铈弪 滂耜弪 聱潸疰帙 桤犷 磬 镟赍蜩"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "暑 %s 漯嚅忮 溧 镳钺忄 ?"
+msgid "Server: "
+msgstr "漾疴: "
-#: ../../modules/interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Module options:"
-msgstr "物鲨 磬 祛潴豚:"
+msgid "Security Alerts:"
+msgstr "橡邃箫疱驿屙 玎 玎蜞:"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"彦汔 祛驽蝈 溧 镱溧溴蝈 铒鲨栩 祗 漕 祛潴豚 %s.\n"
-"物鲨栩 襦 恸 纛痨囹 ``桁=耱铋眍耱 桁2=耱铋眍耱2 ...''.\n"
-"袜镳桁屦: ``io=0x300 irq=7''"
+msgid "Sweden"
+msgstr "剽弼"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "Use Expect for SSH"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(祛潴 %s)"
+msgid "Poland"
+msgstr "项滕"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "软耱嚯桊囗 磬 漯嚅忮 玎 %s 镫囹赅 %s"
+msgid "Importance: %s\n"
+msgstr "锣骓铖: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "See hardware info"
-msgstr "妈 踵痄箦痦囹 桧纛痨圉"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"填, 镳钼屦弪 溧腓 桉牝 溧 桤忄滂蝈 脲眚囹 耠邃 赅蝾 镳噔栩 疱珏疴眍 "
+"觐镨."
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "褥囹 腓 赅犏 %s 桧蝈痿彘?"
+msgid "Other ports"
+msgstr "酿筱 镱痱钼弪"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "褥囹 腓 漯筱() ?"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "袜戾疱龛 襦 %s %s 桧蝈痿彘耔"
+msgid "SMBus controllers"
+msgstr "SMBus 觐眚痤脲痂"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "妈 祛驽 溧 觐眙桡箴桊囹 怦尻 镟疣戾蝥 磬 祛潴膪 蝮."
+msgid "Connection timeout (in sec)"
+msgstr "Timeout 磬 怵赅蜞 ( 皴)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "comma separated strings"
-msgstr "龛珙忮 疣玟咫屙 聱 玎镥蜞"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "眍戾疣 疣玟咫屙 聱 玎镥蜞"
+msgid "Croatian"
+msgstr "怔疴囹耜"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d 聱 玎镥蜞 疣玟咫屙 龛"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "如镱玮囗 磬 聱耱怏忄 "
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d 聱 玎镥蜞 疣玟咫屙 眍戾疣"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "湾 祛汔 溧 磬镳噔 'fork': %s"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "a number"
-msgstr "眍戾"
+msgid "/Help/_About..."
+msgstr "/项祛/_悟眍耥..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Remove user directories before restore."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"袜-麇耱 磬麒 玎 疋玮囗 黟彗 ADSL PPPOE.\n"
-"觐 怵觇 桤镱腌忄 PPTP, ma腙 桤镱腌忄 DHCP.\n"
-"狸 礤 珥噱蝈, 桤徨疱蝈 '桤镱腌忄 PPPOE'."
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "砚骅 皴 犏 软蝈痦弪"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "暑眙桡箴圉 磬 CUPS 镱溴脲 镳桧蝈"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (桤镱腌忄 pppoa) usb"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "桤镱腌忄 DHCP"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "use pptp"
-msgstr "桤镱腌忄 PPPTP"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"枢犏 DHCP 觌桢眚 桉赅蝈 溧 桤镱腌忄蝈 ?\n"
+"项 镱漯噻徼疣礤 dhcp-client ?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "use pppoe"
-msgstr "桤镱腌忄 PPPOE"
+msgid "Domain Name:"
+msgstr "褥 磬 漕戾轫:"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Other ports"
-msgstr "酿筱 镱痱钼弪"
+msgid "On Floppy"
+msgstr "青镟玮 磬 滂耜弪"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "埋梓觐 (徨 firewall)"
+msgid "Restore"
+msgstr "满珩蜞眍忄"
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-"青溧溴 沭屮屙 镱痱: %s.\n"
-"灶痨囹 \"port/tcp\" 桦 \"port/udp\", \n"
-"犏溴蝾 镱痱 戾驿 1 65535."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"妈 祛驽 溧 恸忮溴蝈 漯筱 镱痱钼. \n"
-"锣腓漤 襦 磬镳桁屦: 139/tcp 139/udp.\n"
-"项汶邃礤蝈 /etc/services 玎 桧纛痨圉"
+msgid "Looking for available packages..."
+msgstr "寅瘃 磬腓黜 镟赍蜩..."
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+msgid "Init Message"
+msgstr "羊囵蝾忸 聱钺龛"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall 觐眙桡箴圉\n"
-"\n"
-"俞邃弪 皴, 麇 忤 桁囹 觐眙桡箴桊囗 软蝈痦弪/软蝠囗弪 漕耱 馶n"
-"drakconnect 镳邃 溧 镳噔栩 漯筱 礤 镱-磬蜞蝥."
+msgid "Rescue partition table"
+msgstr "扬囫忄礤 蜞犭桷囹 腩忮蝈"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"袜耱痤轺桕 玎 爨腙 玎蝽 耱屙郳n"
-"\n"
-"翌忄 磬耱痤殁 镥瘃铐嚯磬 玎蝽 耱屙 玎 蜞玷 Mandrake Linux 爨磬.\n"
-"青 祛 镱耱忮蝈眍 磬 玎蜞蜞 疱龛, 祛脲, 镱汶邃礤蝈 耧弼栲腓玷疣磬蜞\n"
-"MandrakeSecurity Firewall 滂耱痂狍鲨."
+msgid "Connection complete."
+msgstr "吗赅蜞 篑蜞眍忮磬."
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "爨 铗牮栩 祓彐钼 赅痱"
+msgid "Cyprus"
+msgstr "疏嵇"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP IMAP 聱疴"
+msgid "Remove from RAID"
+msgstr "橡屐圊龛 铗 RAID"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "项眈觇 聱疴"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"署栾蜩疣 觌 镳尻嚯屙 镳铖 (蝠徕 溧 狷溴 潸脬 镱礤 %d 耔焘铍)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Domain Name Server"
+msgid "Configuration Wizards"
+msgstr "暑眙桡箴圉桀眄 锑泓铖龛鲨"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Web 漾疴"
+msgid "ISDN connection"
+msgstr "ISDN 怵赅"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "primary"
+msgstr "嵇疴"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Host name"
-msgstr "褥 磬 躅耱:"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " 磬 SMB/Windows 聱疴 \"%s\", 镱溴脲 \"%s\""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "褥 磬 躅耱:"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"彦汔 祛驽蝈 溧 桤徨疱蝈 觐 篑塍汨 溧 皴 矬耜囹 镳 耱囵蜩疣礤.\n"
+"\n"
+"殷 襦 镳邃耱噔屙 怦梓觇 篑塍汨, 漕耱龛 磬耱蜞 桧耱嚯圉.\n"
+"橡邈脲溧轵 汨 忭桁囹咫眍 桤觌弪 蝈玷, 觐栩 礤 忤 蝠徕囹 忤磬汨 镳 "
+"耱囵蜩疣礤.\n"
+"\n"
+"填驽蝈 忤滂蝈 牮囹 钺耥栩咫屙 蝈犟 玎 篑塍汔蜞, 赅蝾 镱耱噔栩 牦痤疣 磬 "
+"扈囹 耔\n"
+"磬 桁弪 磬 篑塍汔蜞. 狸 礤 耱 耔泱痦, 溧腓 篑塍汔蜞 镱脲珥 桦 礤, "
+"镱-漕狃錦n"
+" 溧 铖蜞忤蝈 桤犷疣 镱 镱漯噻徼疣礤.\n"
+"\n"
+"马桁噔嚅蝈 蜞玷 耱赅, 嚓 耢蜞蝈 溧 桤镱腌忄蝈 爨磬蜞 耔 赅蝾 "
+"聱疴:\n"
+"耔泱痦 礤 徼躜 桉赅腓 溧 矬耜囹 篑塍汨, 铗 觐栩 礤 皴 眢驿噱蝈. 填,\n"
+"玎镱祉弪, 麇 觐 篑塍汨 祛汔 溧 狷溧 铒囫龛, 嚓 襦 怅膻麇龛 磬 "
+"聱疴.\n"
+"项 镳桧鲨, 桤徼疣轵 襦祛 篑塍汨蝈, 铗 觐栩 磬桉蜩磬 皴 眢驿噱蝈."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "袜耱铋赅 磬 祓彐囹"
-
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "填, 桤徨疱蝈 觐 祓彐钼 噤囡蝈 溧 桤镱腌忄 玎 怵赅 犏 软蝈痦弪"
+msgid "Skip"
+msgstr "橡羼赅鬣"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "如徨疱蝈 祓彐钼 桧蝈痿彘"
+msgid "Niue"
+msgstr "丸"
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"湾 徨 磬戾疱 祓彐钼 噤囡蝈 耔耱屐囹 忤.\n"
-"湾 祛驽蝈 溧 磬耱痤栩 蜞犏 忤 怵赅."
+"狸蜩忤疣/溴嚓蜩忤疣 怦梓觇 祓彐钼 桧蝈痿彘耔, 磬耱痤屙 溧 皴 矬耜囹\n"
+"镳 耱囵蜩疣礤 磬 爨磬蜞."
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"枢犏 DHCP 觌桢眚 桉赅蝈 溧 桤镱腌忄蝈 ?\n"
-"项 镱漯噻徼疣礤 dhcp-client ?"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr "族耱铗 磬 镳铞羼铕 Mhz"
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "湾 磬戾疱磬 ISDN PCI 赅痱. 填 桤徨疱蝈 铗 耠邃忄 尻疣."
+msgid "important"
+msgstr "忄驽"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "Total Progress"
msgstr ""
-"悟牮栩 ISDN PCI 赅痱, 眍 礤镱珥囹 蜩. 填 桤徨疱蝈 觐 PCI 赅痱 "
-"铗 耠邃忄 尻疣."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "暑 铗 耠邃龛蝈 ISDN 赅痱囹 忄蜞 ?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "袜耱痤殛 磬 IDSN"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "悟赅"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "袜蜞蝥"
-
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"狸 桁囹 ISA 赅痱, 耱铋眍耱栩 磬 耠邃忄 尻疣 蝠徕 溧 襦 忮痦.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"狸 桁囹 PCMCIA 赅痱,  蝠徕 溧 珥噱蝈 IRC IO 磬 赅痱囹 耔.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "I don't know"
-msgstr "湾 珥囔"
+msgid "Users"
+msgstr "项蝠遽栩咫"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "鲤筢"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "项溷铗钼赅 磬 bootloader"
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "枢犏 蜩 赅痱 桁囹 ?"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (磬镳. %s)"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "袜戾疱 \"%s\" 桧蝈痿彘. 锐赅蝈 腓 溧 泐 桤镱腌忄蝈?"
+msgid "The passwords do not match"
+msgstr "相痤腓蝈 礤 聱怙噤囹"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "枢犏 镳铗铌铍 驽豚弪 溧 镳铎屙栩 ?"
+msgid "Examples for correct IPs:\n"
+msgstr "橡桁屦 磬 镳噔桦龛 IP:\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "橡铗铌铍 玎 铖蜞磬腓 疋"
+msgid "Frequency (MHz)"
+msgstr "族耱铕蜞 (MHz)"
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"橡铗铌铍 玎 铖蜞磬腓 疋騖n"
-" 徨 D-枢磬 (磬弪 腓龛)"
+"青 溧 桤镱腌忄蝈 玎镟珏 桤犷 磬 镟赍蜩, 耱囵蜩疣轵 桧耱嚯圉蜞 ``linux "
+"defcfg=floppy''"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "European protocol"
-msgstr "赔痤镥轳觇 镳铗铌铍"
+msgid "the number of the processor"
+msgstr "眍戾瘊 磬 镳铞羼铕"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "橡铗铌铍 赔痤镟 (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "锗漯箦痦 忤 鬣耦忭桕 磬耱痤屙 镱 GMT"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"项耦麇蝈 漕耱噔麒赅 耔.\n"
-" 狸 礤 耧桉, 桤徨疱蝈 Unlisted"
+msgid "Give a file name"
+msgstr "泥轵 桁 磬 羿殡"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "满眸屙 ISDN 祛溴"
+msgid "Please choose the port that your printer is connected to."
+msgstr "填, 桤徨疱蝈 镱痱 犏 觐轵 疋玎 镳桧蝈疣 忤."
-#: ../../network/isdn.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "满蝠屮磬 ISDN 赅痱"
+msgid "Change Cd-Rom"
+msgstr "鸯磬 磬 CD-ROM"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "枢犏 蜩嵇 磬 ISDN 怵赅蜞 ?"
+msgid "Paraguay"
+msgstr "相疣汊嚅"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
+"如镱腌忄 桧牮屐屙蜞腠 聱玟噔囗 磬 疱珏疴眍 觐镨 ( 礤 玎戾磬 耱囵栩)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "锑泓铖龛 玎 磬耱痤殛 磬 祓彐囹"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "爨 漯嚅忮 玎 忄蜞 玮箨钼 赅痱 (%s)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "羊囵 磬耱痤殛 (isdn4net)"
+msgid "force"
+msgstr "镳桧箐栩咫眍"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "皖忄 磬耱痤殛 (isdn-light)"
+msgid "Exit"
+msgstr "如脲"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"暑 ISDN 磬耱痤殛 镳邃镱麒蜞蝈 ?\n"
-"\n"
-"* 羊囵囹 磬耱痤殛 桤镱腌忄 isdn4net. 漾潸疰 祛 桧耱痼戾眚鑌n"
-" 眍 赅镳桤磬 玎 磬耱痤殛 礤 耱囗溧痱磬.\n"
-"\n"
-"* 皖忄蜞 磬耱痤殛 镱-脲耥 玎 疣玑桊囗, 镱 耱囗溧痱磬,\n"
-" 眍 镱-爨腙 桧耱痼戾眚.\n"
-"\n"
-"橡屣铕忄戾 忤 铍尻铗屙囹 磬耱痤殛.\n"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Do nothing"
-msgstr "湾 镳噔 龛"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Install rpm"
-msgstr "软耱嚯桊 rpm"
+"抢僚伺剖: 玎忤耔祛耱 铗 祛溴豚 镳桧蝈 镥鬣蜞蜞 耔耱屐 漕 %d MB "
+"漕嵇腠栩咫眍 耦趄箦  狷溴 桧耱嚯桊囗."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
+"爨蝈 磬耱痤屙 桧蝈痿彘.\n"
+"袜耱痤轵 汨 镳邃 蝾忄, 赅蝾 鳅觏弪 磬 '袜耱痤殛'"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Title"
-msgstr "青汶噔桢"
+msgid "Estonian"
+msgstr "篷蝾眈赅"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"锣 祛溴 礤 皴 镱滗驵 铗 耔耱屐囹.\n"
-"项汶邃礤蝈 http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "买铕 DNS 聱疴 (镱 桤犷)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "销疴 DNS 聱疴 (镱 桤犷)"
+"Apache World Wide Web (WWW) 聱疴. 翌 耠箧 溧 钺疣犷蜮 磬 HTML "
+"羿殡钼錦n"
+" CGI."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Domain name"
-msgstr "褥 磬 漕戾轫"
+msgid "Add/Del Clients"
+msgstr "念徉/如蝠桠 觌桢眚"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "如徨疱蝈 祓彐钼 桧蝈痿彘"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Script-based"
-msgstr "拎玷疣磬 磬 耜痂矧"
+msgid "Unknown Model"
+msgstr "湾桤忮耱屙 填溴"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "拎玷疣磬 磬 蝈痨桧嚯"
+msgid "CD/DVD burners"
+msgstr "CD/DVD 玎镨疋帙"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+", 觐轵 皴 耱囵蜩疣 镱 镱漯噻徼疣礤\n"
+" (玎 MS-DOS boot, 礤 玎 lilo)\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "项蝠遽栩咫耜 桁"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "如徨疱蝈 羿殡"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Phone number"
-msgstr "义脲纛礤 眍戾"
+msgid "Firewalling configuration detected!"
+msgstr "悟牮栩 磬耱痤殛 磬 青蝽 羊屙 !"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "褥 磬 怵赅蜞"
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "物鲨 玎 桤徼疣礤 镱 蝈脲纛"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "填, 桤徨疱蝈 皴痂屙 镱痱 犏 觐轵 疋玎 祛溴禚 忤."
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "袜耱痤殛 磬 祓彐囹"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"项忤 皴 镳钺脲 镳 觐眙桡箴圉蜞.\n"
-"橡钼屦弪 忄蜞 怵赅 镳彗 net_monitor 桦 mcc. 狸 忄蜞 怵赅 礤 "
-"疣犷蜩 , 忤 蝠徕 溧 镳尻铐翳泱痂疣蝈."
+"x 觐铕滂磬蜩 磬 蝈犟蝾忄蜞 疣礻郳n"
+" 狃铋 耔焘铍"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"央邃 赅蝾 耱囗 蝾忄, 镳屣铕忄戾 忤 溧 疱耱囵蜩疣蝈 X\n"
-"耩邃囹 耔, 玎 溧 桤徨沩弪 镳钺脲扈 聱 耢磬蜞 桁弪 磬 躅耱."
+msgid "Updating package selection"
+msgstr "吾眍忄礤 磬 桤犷疣 磬 镟赍蜩"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"项玟疣怆屙, 祓彐钼囹 软蝈痦弪 磬耱痤殛囹 玎恸瘌屙.\n"
-"\n"
-"袜耱痤殛栩  狷溧 镳桦铈屙 犏 耔耱屐囹 忤.\n"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "竖溴 桉赅蝈 溧 祛眚桊囹 loopback-羿殡 %s ?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"如龛觏 镳钺脲 镳 疱耱囵蜩疣礤蝾 磬 祓彐囹:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "甜彐囹 皴 眢驿噱 铗 镳羼蜞痱桊囗. 锐赅蝈 腓 溧 镳羼蜞痱桊囔?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "袜耱痤殛 磬 祓彐囹"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "锐赅蝈 腓 溧 耱囵蜩疣蝈 怵赅蜞 耔 镳 玎疱驿囗 ?"
+"蔫耜弪囹 篑镥 聱玟噤屙.\n"
+"彦汔 祛驽蝈 溧 镳彖沭噱蝈 桧耱嚯圉蜞."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "软蝈痦弪 怵赅"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "眍戾瘊 磬 镳铞羼铕"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"袜耱痤桦 耱 觐腙 磬麒磬 玎 怵赅 犏 软蝈痦弪.\n"
-"如徨疱蝈 蝾玷, 觐轵 桉赅蝈 溧 桤镱腌忄蝈.\n"
-"\n"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "如徨疱蝈 怵赅蜞, 觐轵 桉赅蝈 溧 桤镱腌忄蝈"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet 赅痱 玎皴麇龛"
+msgid "Replay"
+msgstr "项怛铕"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN 怵赅"
+msgid "Backup other files"
+msgstr "绣珏疴眍 觐镨 磬 漯筱 羿殡钼"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "玎皴麇磬 赅徨腠 怵赅"
+msgid "No floppy drive available"
+msgstr "爨 綦铒 篑蝠铋耱忸"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cable connection"
-msgstr "枢徨腠 怵赅"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "detected"
-msgstr "玎皴麇磬 "
+msgid "TV norm:"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL 怵赅"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "detected %s"
-msgstr "玎皴麇磬 %s"
+msgid "32 MB"
+msgstr "32 塘"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN 怵赅"
+msgid "Lithuanian AZERTY (new)"
+msgstr "髓蜮栝耜 AZERTY (眍忄)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem 怵赅"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "玎皴麇 磬 镱痱 %s"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"锑痍桊嚯 耱 耦趄箦疱 RAID 赅蝾 root (/).\n"
+"爨 玎疱驿帙 镳钽疣爨, 觐蝾 溧 祛驽 溧 皴 耧疣忤 礤泐 徨 /boot .\n"
+"亦赅 麇 漕徉忮蝈 /boot "
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal modem connection"
-msgstr "吾桕眍忮磬 祛溴祉 怵赅"
+msgid "Previous"
+msgstr "橡邃桫屙"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "悟牮桠囗 磬 篑蝠铋耱忄 ..."
+msgid "Other OS (MacOS...)"
+msgstr "酿筱 窝 (MacOS...)"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "朽瑛桊屙 趔黻桷梃"
+msgid "To activate the mouse,"
+msgstr "青 溧 嚓蜩忤疣蝈 扈囹 耔,"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "如镱腌忄 噔蝾爨蜩黜 玎耔鬣礤"
+msgid "Bringing up the network"
+msgstr "玛膻麾囔 祓彐囹"
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "如徨疱蝈 镳铘桦 玎 磬耱痤殛"
+msgid "Screenshots will be available after install in %s"
+msgstr "秧桁觇  狷溧 磬腓黜 耠邃 桧耱嚯桊囗 %s"
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"念狃 漕 镳 爨泓铖龛赅 玎 磬耱痤殛 磬 祓彐郳n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
-"妈 耱 磬 嵇 溧 磬耱痤栩 软蝈痦弪/祓彐钼囹 耔 怵赅.\n"
-"狸 礤 桉赅蝈 溧 桤镱腌忄蝈 噔蝾爨蜩黜 玎耔鬣礤, 桤觌弪 牦蜩殛囹.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"寅 赅蝾 镳噔栩 祓彐钼 桧耱嚯圉, 祓彐囹 忤 忮麇 磬耱痤屙.\n"
-"助觏弪 Ok, 玎 溧 玎镟玷蝈 磬耱痤殛囹, 桦 悟磬, 玎 溧 镳屙囫蝾栩 "
-"软蝈痦弪 祓彐钼囹 耔 怵赅.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"We are now going to configure the %s connection.\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
-"Press OK to continue."
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
+"铃 玎皴麇 镱忮麇 铗 邃桧 Microsoft Windows 隲n"
+"磬 蜮滂 忤 滂耜. 如徨疱蝈 蝾玷, 麒蝾 潸腈桧 桉赅蝈 溧 镳铎屙栩, 玎 "
+"溧\n"
+"桧耱嚯桊囹 Mandrake Linux 铒屦圉桀眄 耔耱屐.\n"
"\n"
"\n"
+"青 桧纛痨圉, 怦尻 桤狃铄 赅牝 耠邃忄: \"Linux 桁錦", \"Windows 桁"
+"\", \"枢镟鲨蝈騖".\n"
"\n"
-"彦汔  磬耱痤桁 %s 怵赅蜞.\n"
+"\"Linux 桁弪頫" 皴 觐滂疣 赅牝 耠邃忄: \"蜩 磬 滂耜郳", \"眍戾 磬 滂耜"
+"\",\n"
+"\"眍戾 磬 隲" (磬镳桁屦, \"hda1\").\n"
"\n"
-"袜蜩耥弪 OK, 玎 溧 镳钿骅蝈."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "彦汔  磬耱痤桁 %s 怵赅蜞."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "软蝈痦弪 怵赅 磬耱痤殛"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "暑眙桡箴桊囗 磬 怵赅蜞"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "悟恸疰"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "砚骅"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
"\n"
-"You can reconfigure your connection."
-msgstr ""
+"\"诣嵇 磬 滂耜郳" 祛驽 溧 \"hd\", 嚓 IDE 蜮 滂耜, 桦 \"sd\", 嚓 "
+"錦n"
+"SCSI 蜮 滂耜.\n"
"\n"
-"填驽蝈 溧 镳屙囫蝠铊蝈 怵赅蜞."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
+"\"皖戾瘊 磬 滂耜郳" 忤磬汨 狍赈囹 耠邃 \"hd\" 桦 \"sd\". 橡 IDE "
+"滂耜钼:\n"
+"\n"
+" * \"a\" 铉磬鬣忄 \"master 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
+" * \"b\" 铉磬鬣忄 \"slave 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
+" * \"c\" 铉磬鬣忄 \"master 滂耜 磬 怛铕 IDE 觐眚痤脲餦",\n"
+" * \"d\" 铉磬鬣忄 \"slave 滂耜 磬 怛铕 IDE 觐眚痤脲餦".\n"
"\n"
-"填驽蝈 溧 皴 疋驽蝈 犏 软蝈痦弪 桦 溧 镳屙囫蝠铊蝈 怵赅蜞."
+"\n"
+"橡 SCSI 篑蝠铋耱忄, \"a\" 铉磬鬣忄 \"嵇疴 蜮 滂耜\", \"b\" 铉磬鬣忄 "
+"\"怛铕 蜮 滂耜\" ...\n"
+"\n"
+"\"Windows 桁弪頫" 狍赈囹 磬 蜮滂 忤 滂耜 镱 Windows (嵇疴 滂耜 "
+"桦鑌n"
+" 皴 磬痂鬣 \"C:\")."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr " 祛戾眚 礤 耱 疋玎龛 犏 软蝈痦弪"
+msgid "Tanzania"
+msgstr "亦礴囗"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "如麒耠忄 沭囗桷栩 磬 fat 羿殡钼囹 耔耱屐"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
"\n"
-"填驽蝈 溧 皴 铗恸疰弪 桦 溧 镳屙囫蝠铊蝈 怵赅蜞."
+"如蝾黜桕 玎 疱珏疴眍 觐镨: \n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr " 祛戾眚 耱 疋玎龛 犏 软蝈痦弪"
+msgid "Content of the file"
+msgstr "漾潸疰囗桢 磬 羿殡"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL 蝠徕 溧 玎镱麾 'ftp:' 桦 'http:'"
+msgid "Authentication LDAP"
+msgstr "LDAP 囿蝾痂玎鲨"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy-聱疴 蝠徕 溧 http://..."
+msgid "Let me pick any driver"
+msgstr "湾赅 桤徨疣 漯嚅忮"
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Profile "
+msgstr "橡铘桦 "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "transmitted"
+msgstr "镳艴恸痣屙"
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "袜耱痤殛 磬 proxy"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "青镟玷 桤犷 磬 镟赍蜩"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway 噤疱襦 蝠徕 溧 狷溴 恸 纛痨囹 1.2.3.4"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS 聱疴 蝠徕 溧 狷溴 恸 纛痨囹 1.2.3.4"
+msgid "%d comma separated strings"
+msgstr "%d 聱 玎镥蜞 疣玟咫屙 龛"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway 篑蝠铋耱忸"
+msgid "Here is the full list of keyboards available"
+msgstr "膨 嵇脲 耧桉 磬 漕耱瘊镯栩 觌噔栲蝮痂"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (磬镳. %s)"
+msgid "Theme name"
+msgstr "褥 磬 蝈爨"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "DNS server"
-msgstr "DNS 聱疴"
+msgid "/_Help"
+msgstr "/_项祛"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"填, 恸忮溴蝈 host name 玎 爨磬蜞.\n"
-"Host 桁弪 蝠徕 溧 狍溴 磬嵇腠 赈嚯梏桷桊囗 桁,\n"
-"赅蝾 ``mybox.mylab.myco.com''.\n"
-"填驽蝈 聱 溧 恸忮溴蝈 IP 噤疱襦 磬 锣 gateway, 嚓 桁囹 蜞犏"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "the width of the progress bar"
+msgstr "痂磬蜞 磬 脲眚囹 玎 镳钽疱"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "Cook Islands"
+msgstr "务蝠钼 鼠"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP 噤疱聱 蝠徕 溧 狷溴 恸 纛痨囹 1.2.3.4"
+msgid "Formatting partition %s"
+msgstr "灶痨囹桊囗 磬 %s"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start at boot"
-msgstr "如嵇腠屙桢 镳 耱囵蜩疣礤"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "填, 镳钺忄轵 扈囹 耔"
+msgid "Hostname required"
+msgstr "如桉赈 桁 磬 爨磬"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "袜耱痤殛 磬 祓彐囹"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "橡铖脲忄礤 磬 ID 磬 祓彐钼囹 赅痱 (镱脲珥 镳 豚矧铒)"
+msgid "Cancel"
+msgstr "悟赅"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "褥 磬 躅耱:"
+msgid "Searching for configured scanners ..."
+msgstr "祟赅脲 镳桧蝈"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Netmask"
-msgstr "甜彐钼 爨耜"
+msgid "Wheel"
+msgstr "Wheel"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP 噤疱"
+msgid "Videocard"
+msgstr "妈溴 赅痱"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Automatic IP"
-msgstr "棱蝾爨蜩麇 IP 噤疱"
+msgid "Remove Selected"
+msgstr "如蝠桠囗 磬 铊玑疣龛蝈"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (driver %s)"
-msgstr " (漯嚅忮 %s)"
+msgid "/Autodetect _modems"
+msgstr "/棱蝾爨蜩黜 铗牮桠 _祛溴扈"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "袜耱痤殛 磬 祓彐钼铗 篑蝠铋耱忸 %s"
+msgid "Remove printer"
+msgstr "橡屐圊忄礤 磬 镳桧蝈疣"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"填, 恸忮溴蝈 IP 磬耱痤殛栩 玎 蜞玷 爨磬.\n"
-"埋觐 篑蝠铋耱忸 蝠徕 溧 狷溴 恸忮溴眍 赅蝾 IP 噤疱馶n"
-" 蝾麝钼-溴皴蜩黜 铉磬麇龛 (磬镳桁屦, 1.2.3.4)."
+"峦忍劳扰!\n"
+"\n"
+"DrakX 蝠徕 溧 镳屦噻溴腓 锣 Windows . 龙溴蝈 忭桁囹咫龛: 蜞玷 "
+"铒屦圉 錦n"
+"铒囫磬. 狸 铢 礤 耱 泐 磬镳噔桦, 蝠徕 嵇疴 溧 矬耥弪 scandisk (鑌n"
+"邂屙蝮嚯眍 溧 桤镱腌忄蝈 defrag) 镱 Windows 恸瘐 蝾玷 , 蝾汔忄 \n"
+"镱怛铕弪 桧耱嚯圉栲蜞. 凌 徼腩 漕狃 溧 磬镳噔栩 囵蹊 磬 溧眄栩 耔.\n"
+"暑汔蝾 耱 耔泱痦, 磬蜩耥弪 问."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-"峦忍劳扰: 翌忄 篑蝠铋耱忸 忮麇 磬耱痤屙 溧 皴 疋玮 犏 软蝈痦弪.\n"
-"橡铖蝾 镳桢戾蝈, 玎 溧 铖蜞忤蝈 篑蝠铋耱忸蝾 磬耱痤屙.\n"
-"项镳噔赅蜞 磬 镱脲蜞蜞 镱-漕塍  镳彗囡桫 蜞玷 磬耱痤殛."
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"马桁囗桢 ! 悟牮栩 磬耱痤殛 磬 青蝽 羊屙. 填驽 溧 皴 磬腩骅 赅赈 "
-"瘊黜 镱镳噔赅 耠邃 桧耱嚯圉蜞."
+"念狃 漕 磬耱痤殛囹 磬 Proxy.\n"
+"\n"
+"殷  祛驽蝈 溧 篑蜞眍忤蝈 忄蝈 HTTP FTP proxy\n"
+"聱 桦 徨 镱蝠遽栩咫耜 桁 镟痤豚\n"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "悟牮栩 磬耱痤殛 磬 青蝽 羊屙 !"
+msgid "Other"
+msgstr "酿筱"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "相痤豚 磬 嚓囿眚"
+msgid "Default"
+msgstr "项 镱漯噻徼疣礤"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "褥 磬 嚓囿眚 (镱蝈徼蝈腭觐 桁)"
+msgid "Button 2 Emulation"
+msgstr "褥栩圉 磬 2 狍蝾磬"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout 磬 怵赅蜞 ( 皴)"
+msgid "type1inst building"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection speed"
-msgstr "殃铕铖 磬 怵赅蜞"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "如徨疱蝈 羿殡"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "绣骅 磬 磬徼疣礤"
+msgid "X server"
+msgstr "X 聱疴"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "如徨疱蝈 耱疣磬蜞 耔"
+msgid "Domain Admin User Name"
+msgstr "褥 磬 噤扈龛耱疣蝾 磬 漕戾轫"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "2-痂 DNS 磬 漕耱噔麒赅 (镱 驽豚龛)"
+msgid "There was an error while scanning for TV channels"
+msgstr "项忤 皴 沭屮赅 镳 耜囗桊囗 玎 TV 赅磬腓"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "1-忤 DNS 磬 漕耱噔麒赅 (镱 驽豚龛)"
+msgid "US keyboard (international)"
+msgstr "US 觌噔栲蝮疣 (戾驿箜囵钿磬)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Provider phone number"
-msgstr "义脲纛礤 眍戾 磬 漕耱噔麒赅"
+msgid "Not installed"
+msgstr "湾 桧耱嚯桊囗"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "褥 磬 漕耱噔麒赅 (磬镳. provider.net)"
+msgid "LAN connection"
+msgstr "LAN 怵赅"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Your personal phone number"
-msgstr "髓黜 忤 蝈脲纛礤 眍戾"
+msgid "/File/-"
+msgstr "/脏殡/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 磬 赅痱囹"
+msgid "Italian"
+msgstr "闰嚯栲眈赅"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 磬 赅痱囹"
+msgid "Basic"
+msgstr "拎珙"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Card IO"
-msgstr "IO 磬 赅痱囹"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" 棱蝾瘃觇 镳噔 (C) 2002 铗 MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "相戾 (DMA) 磬 赅痱囹"
+msgid "Honduras"
+msgstr "疹礓箴囫"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ 磬 赅痱囹"
+msgid "Card IO"
+msgstr "IO 磬 赅痱囹"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "填, 镱嵇腠弪 桦 镳钼屦弪 镱脲蝾 镱-漕塍"
+msgid "when checked, owner and group won't be changed"
+msgstr "镳 镳钼屦赅, 耦狁蜮屙桕 沭箫囹 爨 溧 狷溧 镳铎屙屙"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "袜耱痤殛 磬 怵赅蜞"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"亦玷 耧弼栲腠 耱囵蜩疣\n"
+"桠桷 磬 豚 玎 溻铋眍\n"
+"耱囵蜩疣礤 磬 耔耱屐囹 忤.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-"谚耱屐囹 礤 桤汶彐溧 疋玎磬 犏 软蝈痦弪.\n"
-"物栩嚅蝈 皴 溧 镳屙囫蝠铊蝈 怵赅蜞."
+"填, 桤徨疱蝈 玎 怦赅 耱赅, 溧腓  皴 镳彖沭噱 赅蝾 镳 桧耱嚯圉蜞, "
+"桦  狷溴 瘊黜"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "青 忄 耔泱痦铖, 皴汔  狷溴蝈 铗恸痃囗."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "谚耱屐囹 祛戾眚 疋玎磬 犏 软蝈痦弪."
+msgid "\t-Network by FTP.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "如镳钺忄礤 磬 怵赅蜞..."
+msgid "Russian (Yawerty)"
+msgstr "畜耜 (Yawerty)"
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "锐赅蝈 腓 皴汔 溧 铒栩囹 怵赅 犏 软蝈痦弪 ?"
+msgid "You must enter a device or file name!"
+msgstr "妈 蝠徕 溧 恸忮溴蝈 篑蝠铋耱忸 桦 桁 磬 羿殡!"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Internet configuration"
-msgstr "袜耱痤殛 磬 软蝈痦弪"
+msgid "/_Quit"
+msgstr "/_如腓玎"
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"湾 腩 耱噔 篑蝠铋耱忸蝾 忤.\n"
-"义耱 玎 鲥腩耱 磬 溧眄栩 镳铒噤磬.\n"
-"翌忄 珥圜, 麇 镨襦礤蝾 磬 赅赈铗 徼腩 镱 滂耜  镳邂瘊\n"
-"镳铊玮铍眍 犷觌箨"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (项 镱漯噻徼疣礤)"
+msgid "Graphics memory: %s kB\n"
+msgstr "灭圄梓磬 镟戾: %s kB\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "袜 CUPS 聱疴 \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "悟溧脲麇 镳桧蝈"
+msgid "access to compilation tools"
+msgstr "漕耱 漕 桧耱痼戾眚 玎 觐祜桦圉"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please select data to restore..."
+msgstr "填, 桤徨疱蝈 溧眄 玎 恸珩蜞眍忄礤..."
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(磬 蜞玷 爨磬)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"狸 耢蜞蝈 溧 桤镱腌忄蝈 aboot, 铖蜞忮蝈 疋钺钿眍 镳铖蝠囗耱忸 (2048 "
+"皴牝铕郳n"
+"襦 漕耱囹龛) 磬鬣腩蝾 磬 滂耜"
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(磬 %s)"
+msgid "Standard test page"
+msgstr "羊囗溧痱磬 蝈耱钼 耱疣龛鲟"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - 吾 Unix 橡桧蝈痦 谚耱屐"
+msgid "Create"
+msgstr "漾玟嚅"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "What"
+msgstr "枢赈"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR 皖忸 镱觐脲龛"
+msgid "There was an error ordering packages:"
+msgstr "项忤 皴 沭屮赅 镳 镱瘊麾囗弪 磬 镟赍蜩蝈:"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Bulgarian (BDS)"
+msgstr "龙脬囵耜 (BDS)"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - 髓礤屙 橡桧蝈疱 腻祛"
+msgid "Disable Server"
+msgstr "如觌忄 漾疴"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Filesystem encryption key"
+msgstr "署栾蜩疣 觌 玎 羿殡钼 耔耱屐"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - 襄鬣蜞, 铃 物帏赅"
+msgid "Gujarati"
+msgstr "皿噤驵疣蜩"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "湾桤忮耱屙 填溴"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Unknown model"
-msgstr "湾桤忮耱屙 祛溴"
+msgid "Save theme"
+msgstr "青镟玮 蝈爨"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "项痱"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "group"
+msgstr "沭箫"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host %s"
-msgstr "疹耱 %s"
+msgid "Brazil"
+msgstr "琉噻桦"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Network %s"
-msgstr "甜彐 %s"
+msgid "Auto Install"
+msgstr "棱蝾爨蜩黜 软耱嚯桊"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "软蝈痿彘 \"%s\""
+msgid "Network Configuration Wizard"
+msgstr "锑泓铖龛 玎 磬耱痤殛 磬 祓彐囹"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "祟赅腠 祓彐()"
+msgid "Removable media automounting"
+msgstr "棱蝾爨蜩黜 祛眚桊囗 磬 耢屙屐 眍耔蝈"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "'Raw' 镳桧蝈 (铃 漯嚅忮)"
+msgid "Printing"
+msgstr "襄鬣蜞礤"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", 桤镱腌忄 觐爨礓 %s"
+msgid "Unkown driver"
+msgstr "湾桤忮耱屙 漯嚅忮"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " 磬 Novell 聱疴 \"%s\", 镳桧蝈 \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "爨 磬戾疱龛 镳桧蝈痂 怅膻麇龛 滂疱牝眍 犏 爨磬蜞 忤"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " 磬 SMB/Windows 聱疴 \"%s\", 镱溴脲 \"%s\""
+msgid "Create a new partition"
+msgstr "漾玟嚅 眍 "
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP 躅耱 \"%s\", 镱痱 %s"
+msgid "Driver:"
+msgstr "酿嚅忮: "
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "湾桤忮耱屙 祛溴"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " 磬 LPD 聱疴 \"%s\", 镳桧蝈 \"%s\""
+msgid "Use fdisk"
+msgstr "如镱腌忄 fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", 镥鬣 磬 %s"
+msgid "MOVE YOUR WHEEL!"
+msgstr "劣彝乓 椅献乓 !"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device"
-msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸"
+msgid "sent: "
+msgstr "桤镳帙: "
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 磬 HP JetDirect"
+msgid "Automatic IP"
+msgstr "棱蝾爨蜩麇 IP 噤疱"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+" 蜞赅 ! 软耱嚯圉蜞 玎恸瘌屙 GNU/Linux 耔耱屐囹 忤 泐蝾忄 玎\n"
+"箫铗疱徉. 橡铖蝾 鳅觏弪 \"OK\", 玎 溧 疱耱囵蜩疣蝈 耔耱屐囹. 填驽蝈 溧\n"
+"耱囵蜩疣蝈 GNU/Linux 桦 Windows, 觐弪 镳邃镱麒蜞蝈 (嚓 桁囹 溻 "
+"耔耱屐),\n"
+"忮漤嚆 耠邃 赅蝾 觐祜 耱囵蜩疣 铗眍忸.\n"
+"\n"
+"馏蝾磬 \"袜镳邃龛鬣鈂" (襦祛 \"抨耧屦蝈韁") 镱赅玮 铢 溻 狍蝾磬 玎:\n"
+"\n"
+" * \"沐礤痂疣礤 磬 滂耜弪 玎 噔蝾爨蜩黜 桧耱嚯圉\": 玎 溧 聱玟噤弪錦n"
+"桧耱嚯圉桀眄 滂耜弪, 觐蝾 耠邃 蝾忄 噔蝾爨蜩黜 溧 桤鼹瘌忄 豚蜞\n"
+"桧耱嚯圉 徨 镱祛 磬 铒屦囹铕, 镳桦梓帙 磬 桧耱嚯圉蜞, 觐蝾 蝾牦-"
+"\n"
+"耱 桤恸瘌桦.\n"
+"\n"
+" 悟徨脲驽蝈, 麇 溻 疣珉梓龛 铒鲨 襦 漕耱, 黟彗 鳅赅礤 磬 狍蝾磬:\n"
+"\n"
+" * \"橡彖沭嚅\". 翌忄 鬣耱梓眍 噔蝾爨蜩玷疣磬 桧耱嚯圉 赅蝾 耱觇蝈\n"
+"镱 疣玟咫礤 磬 腩忮 铖蜞忄 桧蝈疣牝桠龛.\n"
+"\n"
+" * \"棱蝾爨蜩黜郳". 袜嵇腠 噔蝾爨蜩黜 桧耱嚯圉: 蜮滂 滂耜 皴\n"
+"镳彗囡桉忄 磬嵇腠, 怦赅赈 溧眄 皴 玎泱徕囹.\n"
+"\n"
+" 亦玷 铖钺屙铖 祉钽 箐钺磬, 觐汔蝾 桧耱嚯桊囹 泐 狃铋 镱漕犴頫n"
+"爨龛. 妈骝 皴牿蜞 玎 噔蝾爨蜩黜 桧耱嚯圉 磬 磬 web-襦轵.\n"
+"\n"
+" * \"青镟玷 桤犷疣 磬 镟赍蜩\"(*): 玎镟玮 桤犷疣 磬 镟赍蜩, 蜞赅 赅牝 "
+"錦n"
+"磬镳噔屙 镳邃. 暑汔蝾 镳噔栩 漯筱 桧耱嚯圉, 怅囵嚅蝈 滂耜弪囹 鈂n"
+"篑蝠铋耱忸蝾 矬耥弪 桧耱嚯圉蜞 溧 恸疴 黟彗 镱祛 尻疣, 赅蝾\n"
+"磬蜩耥弪 觌噔桫 [F1] 赅蝾 磬镨蝈 >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) 茵徕 忤 FAT-纛痨囹桊囗 滂耜弪 (玎 溧 聱玟噤弪 蜞赈 镱 GNU/Linux,\n"
+"磬镨蝈 \"mformat a:\")"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 磬 USB"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington THinking Mouse"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 磬 磬 镟疣脲脲 镱痱 \\#%s"
+msgid "Configuration of a remote printer"
+msgstr "袜耱痤殛 磬 铗溧脲麇 镳桧蝈"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB 镳桧蝈"
+msgid "Moldova"
+msgstr "填脘钼"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB 镳桧蝈 \\#%s"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr ""
+"填, 镳钼屦弪 溧腓 桉牝 溧 桤蝠桢蝈 脲眚囹 镳邃 溧 镳噔栩 疱珏疴眍 "
+"觐镨."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " 磬 镟疣脲脲 镱痱 \\#%s"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "祟赅腠 镳桧蝈痂"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL 蝠徕 溧 玎镱麾 'ftp:' 桦 'http:'"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "橡尻囵嚅 玎溧龛弪 镳彗 觐爨礓"
+msgid "Add a new rule at the end"
+msgstr "念徉 眍忸 镳噔桦 磬 牮"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "满忮溴蝈 URI 磬 镥鬣蜞 篑蝠铋耱忸"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"妈 聱 疱忄蝈, 溧腓 镳桧蝈痂蝈 磬 铗溧脲麇龛蝈 爨龛  狷溧 "
+"噔蝾爨蜩黜 漕耱龛 磬 蜞玷 爨磬."
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "橡桧蝈 磬 NetWare 聱疴"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"彦汔 祛驽蝈 溧 镱溧溴蝈 铒鲨栩 祗 漕 祛潴豚 %s.\n"
+"物鲨栩 襦 恸 纛痨囹 ``桁=耱铋眍耱 桁2=耱铋眍耱2 ...''.\n"
+"袜镳桁屦: ``io=0x300 irq=7''"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "橡桧蝈 磬 SMB/Windows 95/98/NT 聱疴"
+msgid "Quit without writing the partition table?"
+msgstr "如躅, 徨 溧 玎镨 磬 蜞犭桷囹 磬 腩忮蝈 ?"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "甜彐钼 镳桧蝈 (TCP/Socket)"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "橡桧蝈 磬 铗溧脲麇 LPD 聱疴"
+msgid "Installing packages..."
+msgstr "软耱嚯桊囗 磬 镟赍蜩 ..."
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "橡桧蝈 磬 铗溧脲麇 CUPS 聱疴"
+msgid "Dutch"
+msgstr "疹豚礓耜"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote printer"
-msgstr "悟溧脲麇 镳桧蝈"
+msgid "The following packages need to be installed:\n"
+msgstr "央邃龛蝈 镟赍蜩  蝠徕 溧 皴 桧耱嚯桊囹:\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local printer"
-msgstr "祟赅脲 镳桧蝈"
+msgid "Angola"
+msgstr "理泐豚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "袜耱痤殛 磬 镳桦铈屙..."
+msgid "service setting"
+msgstr "篑蜞眍忄礤 磬 钺耠箧忄龛"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Custom"
+msgstr "孰桢眚耜"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "如蝠桠囗 磬 镳桧蝈 \"%s\"..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "脏殡 忮麇 皴 桤镱腌忄 蝾 漯筱 loopback, 桤徨疱蝈 漯筱 羿殡."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "袜桉蜩磬 腓 桉赅蝈 溧 镳屐圊礤蝈 镳桧蝈疣 \"%s\" ?"
+msgid "Read-only"
+msgstr "燕祛 玎 麇蝈礤"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "橡屐圊忄礤 磬 镳桧蝈疣"
+msgid "Latvia"
+msgstr "肃蜮"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "袜篦弪 赅 溧 桤镱珉忄蝈 蝾玷 镳桧蝈"
+msgid "No known driver"
+msgstr "爨 桤忮耱屙 漯嚅忮"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "悟镥鬣蜮囗 磬 蝈耱钼 耱疣龛鲨"
+msgid "1 MB"
+msgstr "1 塘"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"湾耧屮眍 镳屐圊忄礤 磬 镳桧蝈 \"%s\" 铗 Star Office/OpenOffice.org/GIMP."
+"狸 蝾 礤 蝾玷 觐轵 桉赅蝈 溧 觐眙桡箴桊囹, 恸忮溴蝈 桁 磬 篑蝠铋耱忸/"
+"桁 磬 羿殡 恸 怩钿眍蝾 镱脲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "橡桧蝈瘊 \"%s\" 徨 篑镥 镳屐圊磬 铗 ffice/OpenOffice.org/GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "橡屐圊忄 镳桧蝈 铗 Star Office/OpenOffice.org/GIMP"
+msgid "Configure Local Area Network..."
+msgstr "袜耱铋赅 磬 腩赅腠 祓彐 ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "橡屐圊忄 蝾玷 镳桧蝈 铗 Star Office/OpenOffice.org/GIMP"
+msgid "Launch the sound system on your machine"
+msgstr "象耥赅礤 玮箨钼囹 耔耱屐 磬 爨磬蜞 忤"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"湾篑镥 镳 漕徉礤 磬 镳桧蝈 \"%s\" 磬 Star Office/OpenOffice.org/GIMP."
+msgid "Preparing printer database..."
+msgstr "项溷铗礤 磬 徉玎蜞 溧眄 铗 镳桧蝈痂 ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"橡桧蝈瘊 \"%s\" 徼 篑镥 漕徉忮 犏 Star Office/OpenOffice.org/GIMP."
+msgid "Information"
+msgstr "软纛痨圉"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "念徉礤 磬 镳桧蝈 磬 Star Office/OpenOffice.org/GIMP"
+msgid "No network card"
+msgstr "爨 铗牮栩 祓彐钼 赅痱"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "念徉 蝾玷 镳桧蝈 磬 Star Office/OpenOffice.org/GIMP"
+msgid "Which filesystem do you want?"
+msgstr "暑 羿殡钼 耔耱屐 桉赅蝈 ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "橡桧蝈瘊 \"%s\" 忮麇 铒疱溴脲 玎 镱腌忄礤 镱 镱漯噻徼疣礤."
+msgid "3 buttons"
+msgstr "3 狍蝾磬"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default printer"
-msgstr "橡桧蝈 镱 镱漯噻徼疣礤"
+msgid "Detailed information"
+msgstr "项漯钺磬 桧纛痨圉"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "物疱溴腓 蝾玷 镳桧蝈 玎 镱腌忄礤 镱 镱漯噻徼疣礤"
+msgid "Malta"
+msgstr "锑腧"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "物鲨 磬 镳桧蝈疣"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"袜耱痤殛 磬 镳桧蝈疣 镱 镱漯噻徼疣礤\n"
+"\n"
+"茵徕 溧 耱 耔泱痦, 麇 泐脲扈磬蜞 磬 耱疣龛鲟蜞\n"
+" 蜩镟 磬 爨耱桦铗 (嚓 桁) 襦 磬耱痤屙 镳噔桦眍.\n"
+"悟徨脲驽蝈, 麇 镳 祉钽 忤耦觐 赅麇耱 磬 桤躅溧 磬\n"
+"镳桧蝈疣, 蝾 祛驽 珥圜栩咫眍 溧 皴 玎徉忤."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "橡铊玮钿栩咫 磬 镳桧蝈疣, 祛溴"
+msgid "This floppy is not FAT formatted"
+msgstr "亦玷 滂耜弪 礤 纛痨囹桊囗 磬 FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "橡铊玮钿栩咫 磬 镳桧蝈疣, 祛溴, 漯嚅忮"
+msgid "Configuring network"
+msgstr "袜耱铋赅 磬 祓彐囹"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "如蝠桠囗 磬 耱囵 镳桧蝈 \"%s\"..."
+msgid "Graphic Card"
+msgstr "灭圄梓磬 赅痱"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "褥 磬 镳桧蝈疣, 铒桉囗桢, 戾耱铒铍铈屙桢"
+msgid "Resizing Windows partition"
+msgstr "如麒耠忄 沭囗桷栩 磬 Windows 羿殡钼囹 耔耱屐"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer connection type"
-msgstr "诣 磬 怵赅蜞 犏 镳桧蝈疣"
+msgid "Provider dns 1 (optional)"
+msgstr "1-忤 DNS 磬 漕耱噔麒赅 (镱 驽豚龛)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Raw 镳桧蝈"
+msgid "Cameroon"
+msgstr "枢戾痼"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "袜镳噔 泐!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"彦汔 祛驽蝈 溧 疣玟咫栩 %s.\n"
+"暑汔蝾 耱 泐蝾忤, 礤 玎狃噔轵 溧 玎镨蝈 桤镱腌忄殛 `w'"
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -10347,450 +10311,339 @@ msgstr "袜镳噔 泐!"
msgid "Close"
msgstr "青蜮铕"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"橡桧蝈 %s\n"
-"枢赈 桉赅蝈 溧 镱镳噔栩 镱 蝾玷 镳桧蝈 ?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "项镳噔 磬耱痤殛栩 磬 镳桧蝈"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "念徉忤 眍 镳桧蝈"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "皖痨嚯屙 疱骅"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Change the printing system"
-msgstr "橡铎磬 耔耱屐囹 玎 镥鬣"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS 觐眙桡箴圉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Calendar"
+msgstr "枢脲礓囵"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"央邃龛蝈 镳桧蝈痂 襦 磬耱痤屙. 助觏弪 磬 邃桧 铗 , 玎 溧 泐 疱溧牝桊囹 "
-"桦 玎 溧 镱塍麒蝈 桧纛痨圉 玎 礤泐."
+"青 溧 桤镱腌忄蝈 铗溧脲麇 lpd 镳桧蝈, 蝠徕 溧 镳邃铖蜞忤蝈 桁屙囹 磬 "
+"躅耱 磬 镳桧蝈痦 聱疴 桁弪 磬 镳桧蝈疣 磬 蝾玷 聱疴."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "襄鬣蝽 耔耱屐: "
+msgid "Iceland"
+msgstr "锐豚礓"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "橡钼屦赅 磬 桧耱嚯桊囗 耦趄箦..."
+msgid "consolehelper missing"
+msgstr "腓锺忄 镱祛 磬 觐礴铍"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "软耱嚯桊囗 磬 Foomatic..."
+msgid "stopped"
+msgstr "耧磬"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "屯弩耧屮磬 磬耱痤殛 磬 镳桧蝈 \"%s\"!"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "袜耱痤殛 磬 镳桧蝈疣 \"%s\"..."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "族蝈礤 磬 溧眄 铗 镳桧蝈疣 ..."
+msgid "Expand Tree"
+msgstr "朽瑛桊 潸疴铗"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "暑 镳桧蝈痦 耔耱屐 (spooler) 桤赅蝈 溧 桤镱腌忄蝈 ?"
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "如徨疱蝈 镳桧蝈疱 spooler"
+msgid "Expert Mode"
+msgstr "朽瑛桊屙 趔黻桷梃"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "橡桧蝈 镱 镱漯噻徼疣礤"
+#, c-format
+msgid "Printer options"
+msgstr "物鲨 磬 镳桧蝈疣"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installing %s ..."
-msgstr "软耱嚯桊 %s ..."
+msgid "Local Network adress"
+msgstr "冷疱 磬 祟赅腠 祓彐"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing %s ..."
-msgstr "如蝠桠囗 磬 %s ..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "绣珏疴眍 觐镨 磬 忄蝈 耔耱屐龛 羿殡钼 (/etc 滂疱牝铕)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "羊囵蜩疣礤 磬 镳桧蝈痦囹 耔耱屐 镳 耱囵蜩疣礤"
+msgid "Samba Server"
+msgstr "Samba 漾疴"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "软耱嚯桊囗 磬 镳桧蝈痦囹 耔耱屐 %s 龛忸 磬 耔泱痦铖"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "镟疣眍梓眍"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "忤耦觐"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting printing system..."
-msgstr "绣耱囵蜩疣礤 磬 镳桧蝈痦囹 耔耱屐"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuration of a remote printer"
-msgstr "袜耱痤殛 磬 铗溧脲麇 镳桧蝈"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Australian Optus cable TV"
msgstr ""
-"爨 漕耱 漕 祓彐囹 蜞犏 礤 祛驽 溧 狷溴 篑蜞眍忮. 填, "
-"镳钼屦弪 磬耱痤殛囹 踵痄箦疣 耔. 翌汔忄 铒栩嚅蝈 溧 磬耱痤栩 "
-"铗溧脲麇龛 镳桧蝈 铗眍忸."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> 戾驿 咫屐屙蜩蝈 | <Space> 桤徼疣 | <F12> 耠邃忄 尻疣"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure the network now"
-msgstr " 祛戾眚 磬耱痤殁囔 祓彐囹"
+msgid "Subnet:"
+msgstr "项潇疱驵:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "橡钿骅 徨 磬耱铋赅 磬 祓彐囹"
+msgid "Zimbabwe"
+msgstr "氰灬噌忮"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "填, 恸忮溴蝈 桁 磬 躅耱 桦 IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "泽黻鲨铐嚯眍耱蜞 磬 祓彐囹 礤 磬耱痤屙"
+msgid "When"
+msgstr "暑汔"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Starting network..."
-msgstr "羊囵蜩疣礤 祓彐囹 ...."
+msgid "Second DNS Server (optional)"
+msgstr "买铕 DNS 聱疴 (镱 桤犷)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "物疱耥忄礤 磬 溧眄栩 铗 镳桧蝈疣 ..."
+msgid "Finland"
+msgstr "澡黼囗滂"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"橡艴恸痣桦 耱 镳桧蝈 镱 镱漯噻徼疣礤 (\"%s\"), 锐赅蝈 腓 溧 泐 铖蜞忤蝈 "
-"镱 镱漯噻徼疣礤 眍忄蜞 镳桧蝈痦 耔耱屐 %s ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "橡屙铖 磬 磬耱痤殛 磬 镳桧蝈"
+msgid "Color depth: %s\n"
+msgstr "您脶铟桧 磬 鲡弪: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "橡艴恸痣礤 磬 %s ..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "湾 祛驽蝈 溧 桤觌栩 蝾玷 镟赍. 翌 蝠徕 溧 狷溴 钺眍忮"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "皖忸 桁 磬 镳桧蝈"
+msgid "Loading from floppy"
+msgstr "青疱驿囗 铗 滂耜弪"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"橡桧蝈瘊 \"%s\" 忮麇 聱耱怏忄,\n"
-"磬桉蜩磬 腓 桉赅蝈 溧 镳彗囡桫弪 磬耱痤殛囹 ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "褥弪 磬 镳桧蝈疣 蝠徕 溧 聱潸疰 襦祛 狍赈, 麒耠 镱澉屦蜞怅"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "橡艴恸痣"
+msgid "Slovenia"
+msgstr "央钼屙"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
-"橡桧蝈 桁 \"%s\" 忮麇 聱耱怏忄 %s.\n"
-"助觏弪 \"橡艴恸痣鑌", 玎 溧 泐 镳彗囡桫弪.\n"
-"填驽蝈 聱 蜞赅 溧 磬镨蝈 眍忸 桁 桦 溧 镳铒篑眚 镳桧蝈疣."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "湾 镳艴恸痣 镳桧蝈痂"
+"满忮溴蝈 镱蝠遽栩咫\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"\n"
-"悟徨脲驽蝈 镳桧蝈痂蝈, 觐栩 桉赅蝈 溧 镳艴恸痣栩 鳅觏弪錦n"
-"\"橡艴恸痣鑌"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"漾 蜞赅, 镳桧蝈痂 磬耱痤屙 PPD 羿殡钼 镳邃铖蜞忮龛 铗 镳铊玮钿栩咫栩 "
-"桁 桦 铕桡桧嚯龛 CUPS 漯嚅忮痂 礤 祛汔 溧 狷溧 镳艴恸痣龛."
+msgid "ProgressBar color selection"
+msgstr "如犷 磬 鲡 玎 脲眚囹 磬 镳钽疱"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"枢蝾 漕嵇腠屙桢, 铒帏觇蝈 礤 聱玟噤屙 蜞玷 镳钽疣爨 桦 \"foomatic-"
-"configure\" 礤 祛汔 溧 狷溧 镳艴恸痣龛."
+"翌忄 襦 疣珉梓龛蝈 玎镨耔.\n"
+"填驽蝈 溧 漕徉忤蝈 铢 桦 溧 镳铎屙栩 聱耱怏忄蝈."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD LPRng 礤 镱滗驵 IPP 镳桧蝈痂.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ 镱滗驵 襦祛 腩赅腠 镳桧蝈痂, 铗溧脲麇龛 LPD 镳桧蝈痂 Socket/TCP "
-"镳桧蝈痂.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"CUPS 礤 镱滗驵 镳桧蝈痂 磬 Novell 聱疴 桦 镳桧蝈痂 桤镳帙帙 溧眄 恸 "
-"疋钺钿眍-桤沭噤屙 觐爨礓.\n"
+"象耜 觐爨礓 镱 疣顼桉囗桢 恸 怵屐 铒疱溴脲眍 铗 觐爨礓囹 at 矬耜郳n"
+"磬犷 铗 漯筱, 觐汔蝾 磬蝾忄疱眍耱蜞 耧噤礤 漕耱囹眍."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"填驽蝈 溧 觐镨疣蝈 磬耱痤殛栩 磬 镳桧蝈疣, 觐栩 耱 桤恸瘌桦 玎 spoller %"
-"s 磬 %s, 蝈牦 spooler. 豚蜞 桧纛痨圉 玎 磬耱痤殛栩 (桁 礤 镳桧蝈, "
-"铒桉囗桢, 戾耱铒铍铈屙桢, 忤 磬 怵赅蜞 磬耱痤殛 镱 镱漯噻徼疣礤) 皴 "
-"镳彗囡桉忄, 眍 疣犷蜩蝈 礤 皴 镳艴恸痣.\n"
-"湾 怦梓觇 铒帏觇 祛汔 溧 狷溧 镳艴恸痣屙 镱 耠邃龛蝈 镳梓桧:\n"
+msgid "Radio support:"
+msgstr "项漯赅 磬 疣滂:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "Installing SANE packages..."
+msgstr "软耱嚯桊囗 磬 SANE 镟赍蜩 ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "聱溧忄礤 磬 耱囵蜩疣 滂耜弪"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "悟镥鬣蜮囗 磬 蝈耱钼(囹/栩) 耱疣龛(/) ..."
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Print option list"
-msgstr "扬桉 镳桧蝈痦 铒鲨"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "襄鬣蜞礤 磬 镳桧蝈 \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "襄鬣蜞礤 磬 镳桧蝈 \"%s\""
+msgid "Change type"
+msgstr "橡铎龛 蜩镟"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "襄鬣蜞/殃囗桊囗邋 磬 \"%s\""
+msgid "SILO Installation"
+msgstr "SILO 桧耱嚯圉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "襄鬣蜞礤/殃囗桊囗/灶蝾 赅痱梓觇 磬 镳桧蝈 \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-"青 溧 忤滂蝈 耧桉 磬 漕耱龛蝈 铒鲨 玎 蝈牦 镳桧蝈, 桦 镳铟弪弪 "
-"耧桉 镱赅玎 镱-漕塍 桦 鳅觏弪 磬 狍蝾磬 \"扬桉 铒鲨 玎 镥鬣騖".%s%"
-"s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"项玟疣怆屙, 桧耱嚯圉蜞 镳尻膻麇磬.\n"
+"橡屐圊礤蝈 耱囵蝾忸蝾 篑蝠铋耱忸 磬蜩皴礤 Enter 玎 溧 疱耱囵蜩疣轵.\n"
"\n"
-"暑爨礓栩 \"%s\" \"%s\" 聱 蜞赅 镱玮铍忄 溧 镱镳噔蝈 桤狃囗栩 "
-"磬耱痤殛 玎 铒疱溴脲磬 疣犷蜞 磬 镳桧蝈疣. 橡铖蝾 漕徉忮蝈 桉赅龛蝈 "
-"磬耱痤殛 犏 觐爨礓龛 疱, 磬镳. \"%s <file>\".\n"
+"\n"
+"青 桧纛痨圉 铗眍耥 镱镳噔觇, 磬 蜞玷 忮瘃 磬 Mandrake Linux,\n"
+"皴 觐眈箅蜩疣轵 Errata, 磬 噤疱 : \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"软纛痨圉 玎 磬耱痤殁囗 磬 耔耱屐囹 忤 祛驽蝈 溧 磬戾痂蝈 鈂n"
+"耠邃桧耱嚯圉桀眄囹 汶噔 铗 Official Mandrake Linux User's Guide."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "paranoid"
+msgstr "镟疣眍梓眍"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10804,275 +10657,220 @@ msgstr ""
"镥鬣蝽栩 滂嚯铉 祉钽 镳桦铈屙. 皖 蝮 礤 镱耱噔轵 桁弪 磬 羿殡, "
"玎蝾 蝾 皴 镱溧忄 铗 镳桦铈屙桢蝾.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"青 溧 铗镥鬣蜞蝈 羿殡 铗 觐爨礓龛 疱 (蝈痨桧嚯屙 镳铉铕弼), 桤镱腌忄轵 "
-"觐爨礓囹 \"%s <file>\" 桦 \"%s <file>\".\n"
+msgid "Resolution"
+msgstr "朽玟咫栩咫磬 耧铖钺眍耱"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"青 溧 忤滂蝈 耧桉 漕耱龛蝈 铒鲨 玎 蝈牦 镳桧蝈, 鳅觏弪 磬 狍蝾磬 "
-"\"扬桉 铒鲨 玎 镥鬣騖"."
+"青 溧 镥鬣蜞蝈 磬 SMB 镳桧蝈, 蝠徕 溧 溧溴蝈 桁弪頫n"
+"磬 SMB 躅耱 (青徨脲骊 ! 翌 祛驽 溧 疣珉梓眍 铗 TCP/IP 躅耱 !)\n"
+" 恸珈铈眍 IP 噤疱襦 磬 镳桧蝈瘃觇 聱疴, 赅牝 钺蝾 桁 磬\n"
+"镳桧蝈疣, 漕 觐轵 桉赅蝈 漕耱 镱漉钿 桁屙, 镟痤豚 桧纛痨圉\n"
+"玎 疣犷蝽囹 沭箫."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"暑爨礓囹 \"%s\" 聱 蜞赅 忤 镱玮铍忄 溧 镱镳噔栩 磬耱痤殛栩 磬 铒鲨栩 "
-"玎 铒疱溴脲磬 疣犷蜞 磬 镳桧蝈疣. 橡铖蝾 漕徉忮蝈 鲥豚龛蝈 磬耱痤殛 犏 "
-"觐爨礓龛 疱, 磬镳. \"%s <file>\". "
+"项玮铍忄/青狃囗忄 icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"青 溧 桤镥鬣蜞蝈 羿殡 铗 觐爨礓龛 疱 (蝈痨桧嚯屙 镳铉铕弼) 桤镱腌忄轵 "
-"觐爨礓囹 \"%s <file>\".\n"
+msgid "reconfigure"
+msgstr "镳屙囫蝠铋赅"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"翌忄 耧桉 铗 磬腓黜 玎 镥鬣 铒鲨 铗磬 皴 玎 蝈牦 镳桧蝈:\n"
-"\n"
+"枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛 XFree %s.\n"
+"我僚伺婆遗, 着 椅吕 攀严判忍磐依送 衔哪汹剖 饰滔抟谛谝 氯 涛婆 睦 "
+"抢寥."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "Xinetd 钺耠箧忄礤"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "漕耱 漕 祓彐钼 桧耱痼戾眚"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-"填驽蝈 溧 桤镱腌忄蝈 蜞玷 觐爨礓 镱脲蝾 \"暑爨礓 玎 镥鬣騖" 磬 "
-"镥鬣蝽栩 滂嚯铉 祉顑 镳桦铈屙. 皖 颌 礤 镱耱噔轵 桁弪 磬 羿殡, "
-"玎蝾 蝾 皴 镱溧忄 铗 镳桦铈屙桢蝾.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"青 溧 桤镥鬣蜞蝈 羿殡 铗 觐爨礓龛 疱 (蝈痨桧嚯屙 镳铉铕弼), 祛驽蝈 桦 溧 "
-"桤镱腌忄蝈 觐爨礓囹 \"%s <file>\" 桦 沭圄梓龛 镥鬣蜞 桧耱痼戾眚: \"xpp "
-"<file>\" 桦 \"kprinter <file>\". 灭圄梓龛蝈 桧耱痼戾眚 忤 镱玮铍忄 溧 "
-"桤徼疣蝈 镳桧蝈疣 溧 镱镳噔蝈 脲耥 磬耱痤殛栩 磬 铒鲨栩.\n"
+"Mandrake Linux 9.1 忤 镲铉忸忄 溧 镱塍麒蝈 磬-镱耠邃龛蝈 忮瘃梃 磬 "
+"耦趄箦疣, 溧 耠篪囹 祗玷赅腠 羿殡钼, 溧 钺疣犷蜮囹 纛蝾 沭圄梓龛 "
+"羿殡钼, 赅牝 溧 汶邃囹 忤溴."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "橡铕噌铗 腓 赅牝 蝠徕 ?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "翌忄 耧桉 磬 噔蝾爨蜩黜 铗牮栩 镳桧蝈痂."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"义耱钼栩 耱疣龛鲨 襦 桤镳囹屙 犏 镳桧蝈痦.\n"
-"填驽 溧 铗礤戾 爨腙 怵屐 镳邃 镳桧蝈疣 溧 玎镱黜.\n"
+"灭屮赅 镳 桧耱嚯桊囗 磬 aboot, \n"
+"溧 皴 铒栩囔 腓 溧 镳钿驵 桧耱嚯圉蜞 漕痂, 嚓 蝾忄 箜桄蝾骅 嵇疴 ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"义耱钼栩 耱疣龛鲨 襦 桤镳囹屙 犏 镳桧蝈疣.\n"
-"填驽 溧 铗礤戾 爨腙 怵屐 镳邃 镳桧蝈疣 溧 玎镱黜.\n"
-"漾耱龛 磬 镥鬣蜞:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "湾 镥鬣蜩 龛赅赈 蝈耱钼 耱疣龛鲟"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "义耱钼 耱疣龛鲟 聱 耥桁赅"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "离蝈痦囹桠磬 蝈耱钼 耱疣龛鲟 (4)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "离蝈痦囹桠磬 蝈耱钼 耱疣龛鲟 (翔耢)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"满珩蜞眍忄 桤狃囗栩錦n"
+"羿殡钼"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standard test page"
-msgstr "羊囗溧痱磬 蝈耱钼 耱疣龛鲟"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Print"
-msgstr "襄鬣"
+msgid "Please fill or check the field below"
+msgstr "填, 镱嵇腠弪 桦 镳钼屦弪 镱脲蝾 镱-漕塍"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "铃 蝈耱钼 耱疣龛鲨"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "锐赅蝈 腓 溧 玎镟玷蝈 镳铎屙栩 /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"填, 桤徨疱蝈 蝈耱钼 耱疣龛鲟 玎 镥鬣.\n"
-"青徨脲骊: 蝈耱钼囹 耱疣龛鲟 玎 耥桁赅 祛驽 溧 铗礤戾 漕耱 潸脬頫n"
-"怵屐 溧 皴 桤镥鬣蜞 磬 豚珏痦 镳桧蝈痂 爨腙 镟戾 祛驽 恸钺\n"
-"溧 礤 桤脲珏. 镱忮麇蝾 耠篦噼 漕耱囹磬 耱囗溧痱磬 蝈耱钼 耱疣龛鲟."
+msgid "Boot Protocol"
+msgstr "羊囵蜩疣 镳铗铌铍"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "义耱钼 耱疣龛鲨"
+msgid "LVM-disks %s\n"
+msgstr "LVM-滂耜钼 %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"锐赅蝈 腓 溧 磬耱痤栩 蝾玷 镳桧蝈 (\"%s\")\n"
-"赅蝾 镳桧蝈 镱 镱漯噻徼疣礤 ?"
+msgid "The package %s is needed. Install it?"
+msgstr "相赍 %s 礤钺躅滂. 泥 泐 桧耱嚯桊囔?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "物鲨蜞 %s 桤恸 沭囗桷栩 !"
+msgid "On boot"
+msgstr "橡 玎疱驿囗"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "袜耱痤殛囹 %s 蝠徕 溧 麒耠 !"
+msgid "Bus identification"
+msgstr "蠕屙蜩翳赅鲨 磬 磬"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "袜耱痤殛囹 %s 蝠徕 溧 腩 麒耠 !"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "如犷 祛溴 磬 镳桧蝈疣"
+msgid "Please make a backup of your data first"
+msgstr "销疴 聱玟嚅蝈 backup 磬 疋铊蝈 溧眄"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"袜耱痤殛 磬 镳桧蝈疣 镱 镱漯噻徼疣礤\n"
-"\n"
-"茵徕 溧 耱 耔泱痦, 麇 泐脲扈磬蜞 磬 耱疣龛鲟蜞\n"
-" 蜩镟 磬 爨耱桦铗 (嚓 桁) 襦 磬耱痤屙 镳噔桦眍.\n"
-"悟徨脲驽蝈, 麇 镳 祉钽 忤耦觐 赅麇耱 磬 桤躅溧 磬\n"
-"镳桧蝈疣, 蝾 祛驽 珥圜栩咫眍 溧 皴 玎徉忤."
+msgid "Vatican"
+msgstr "锣蜩赅磬"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "桁囹 镱忮麇 铗 邃桧 蜮滂 滂耜钼, 觐 溧 桤镱腌忄 玎 桧耱嚯圉蜞?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "袜耱痤殛 磬 Lexmark inkjet"
+msgid "Eritrea"
+msgstr "硼栩疱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet 镳桧蝈痦栩 漯嚅忮痂 镳邃铖蜞忮龛 铗 Lexmark 镱滗驵 襦祛 腩赅腠 "
-"镳桧蝈痂, 徨 镳桧蝈痂 磬 铗溧脲麇龛 爨龛 桦 镳桧蝈痦 爨龛. 填, "
-"疋驽蝈 镳桧蝈疣 耔 磬 腩赅脲 镱痱 桦 泐 磬耱痤轵 磬 爨磬蜞, 犏 觐蝾 "
-" 疋玎."
+msgid "Remove List"
+msgstr "如蝠桠 耧桉"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "袜耱痤殛 磬 OKI Winprinter"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr "狸 忄 镳桧蝈 礤 耧桉, 桤徨疱蝈 聱忪羼蜩 桦 镱漕徨."
+msgid "Inuktitut"
+msgstr "软箨蜩蝮"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Morocco"
+msgstr "锑痤觐"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11081,1433 +10879,1180 @@ msgstr "枢犏 祛溴 镳桧蝈 桁囹 ?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "如犷 祛溴 磬 镳桧蝈疣"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Reading printer database..."
-msgstr "族蝈礤 磬 徉玎蜞 溧眄 铗 镳桧蝈痂 ..."
+msgid "Add a new printer"
+msgstr "念徉忤 眍 镳桧蝈"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select model manually"
-msgstr "如犷 磬 祛溴 瘊黜"
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The model is correct"
-msgstr "翌玷 祛溴 镳噔桦屙"
+msgid "<-- Delete"
+msgstr "<-- 如蝠桠"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Nepal"
+msgstr "湾镟"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Your printer model"
-msgstr "锣 祛溴 镳桧蝈"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "项溷铗礤 磬 徉玎蜞 溧眄 铗 镳桧蝈痂 ..."
+msgid "chunk size"
+msgstr "泐脲扈磬 磬 镟瘅弪"
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Location"
-msgstr "体耱铒铍铈屙桢"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "觐爨礓栩 镳邃 耱囵蜩疣礤, 桦 'c' 玎 觐爨礓屙 疱."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Description"
-msgstr "物桉囗桢"
+msgid "Problems installing package %s"
+msgstr "橡钺脲扈 桧耱嚯桊囗弪 磬 镟赍蜞 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer"
-msgstr "褥 磬 镳桧蝈"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "妈  镱塍麒蝈 蝠邂钽 嚓 磬蝾忄疴囗弪 镱-忤耦觐 铗 蜞玷 耱铋眍耱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"埋尻 镳桧蝈 皴 眢驿噱 铗 桁 (磬镳桁屦 \"printer\"). 项脲蜞蜞 物桉囗桢 "
-"体耱铒铍铈 礤 蝠徕 溧 狷溧 镱嵇脞囗. 褥 觐戾眚囵 玎 镱蝠遽栩咫栩."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "满忮溴蝈 桁 磬 镳桧蝈 觐戾眚囵"
+msgid "Add a scanner manually"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "橡噔 镱痱 磬 镳桧蝈疣 磬腓麇 玎 CUPS..."
+msgid "Reload partition table"
+msgstr "橡彗囵邃 蜞犭桷囹 腩忮蝈"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "橡钼屦赅 磬 篑蝠铋耱忸 觐眙桡箴圉 玎 HPOJ..."
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "泥, 桉赅 autologin 蝾忄 (镱蝠遽栩咫, 溴耜蝾)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "殃囗桊 磬 忄蝾 HP 祉钽铘箜牿桀磬腠 篑蝠铋耱忸"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "软耱嚯桊囗 磬 mtools 镟赍蜩..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "软耱嚯桊囗 磬 SANE 镟赍蜩 ..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Boot"
+msgstr "秒噔屙"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "软耱嚯桊囗 磬 HPOJ 镟赍蜩 ..."
+msgid "Tuner type:"
+msgstr "诣 磬 蝮礤:"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-"泥腓 忄 镳桧蝈 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 铗 HP 桦 Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 聱 耜屙屦, Sony IJP-"
-"V100), HP PhotoSmart 桦 HP LaserJet 2200?"
+"念殇 怵屐弪 溧 桤徨疱蝈 耔耱屐 玎 镥鬣 玎 忄 觐祜.酿筱栩錦n"
+"铒屦圉桀眄 耔耱屐 祛驽 溧 忤 镳邃豚汔 邃磬,眍 龛 忤 镳邃豚汔戾 溻.\n"
+"埋赅 铗 镳桡钿屙 玎 溧溴 蜩 觐眙桡箴圉.\n"
+"\n"
+" * \"%s\"-- 嚓痤龛 磬 \"print,don't queue\"(\"镟鬣蜞,礤 鬣赅閈"), "
+"桎遴腠騖n"
+"桤犷,嚓 桁囹 滂疱牝磬 怵赅 镳桧蝈疣,桉赅蝈 溧 泐 觐眚痤腓疣蝈,桦鑌n"
+"爨蝈 祓彐钼 镳桧蝈痂.(\"%s\" 祛驽 溧 疣犷蜩 襦祛 祉钽 镳铖蜩\n"
+"耔蝮圉梃 赅 徉忮,觐汔蝾 皴 镱腌忄 祓彐.) 橡屣铕栩咫眍 溧 \n"
+"桤镱脞囹 \"pdq\" 嚓 爨蝈 铒栩 GNU/Linux. \n"
+" * \"%s\" - `` Common Unix Printing System``(钺梓嚅磬 耔耱屐 玎 镥鬣 玎 "
+"Unix)\n"
+" 铗腓麇 桤犷,玎 镥鬣 赅牝 磬 耦狁蜮屙 忤 镳桧蝈,蜞赅 磬 漯筱,磬\n"
+"镱腩忤 疋 疣珩蝾龛. 脲耥 玎 觐眙桡箴桊囗 祛驽 疣犷蜩 赅蝾\n"
+"觌桢眚 桦 聱疴 磬 囵踵梓磬蜞\"lpd \",觐弪 镳噔 磬嵇腠 聱忪羼蜩爨\n"
+" 镱-耱囵 铒屦圉桀眄 耔耱屐,觐栩 祛驽 怦 铢 溧 皴 眢驿 铗 蜞玷\n"
+"篑塍汔.满镳尻 麇 漕耱 祛,铖眍忭囹 桧耱嚯圉 镱黩 蝾腙钼 \n"
+"脲耥,觐腙铗 蜞玷 磬 \"pdq\".狸 桉赅蝈 溧 屐箅桊囹 \"lpd\" 聱疴,\n"
+"筲屦弪 皴,麇 \"cups-lpd\" 溴祛磬 矬耥囹.\"%s\" 怅膻麾 沭圄梓龛 \n"
+"桧蝈痿彘耔 玎 镳鬻囹 桤犷 磬 铒鲨 玎 镳桧蝈疣,赅牝 玎\n"
+"觐眙桡箴桊囗弪 祗.\n"
+"\n"
+"狸 皴汔 磬镳噔栩 桤犷, 镱-犏耥 疣玑屦弪,麇 礤 踵疱疋囹 耔耱屐囹郳n"
+"耔 玎 镥鬣,祛驽蝈 溧 耢屙栩 赅蝾 矬耥弪 PrinterDrake 铗 锑礓疱殛 \n"
+"觐眚痤腓 鲥眚 鳅觏弪 磬 \"尻耧屦騖"."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A command line must be entered!"
-msgstr "茵徕 溧 狷溴 恸忮溴 觐爨礓屙 疱!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "暑爨礓屙 疱"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" 觌噔桫"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Pipe into command"
-msgstr "橡钽疣戾 赅磬 犏 觐爨礓"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "悟牮栩 祛溴: %s %s"
+msgid "Security Administrator:"
+msgstr "冷扈龛耱疣蝾 镱 玎蜞:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "茵徕 溧 狷溴 恸忮溴 忄腓溴 URI!"
+msgid "Please enter your login"
+msgstr "填, 恸忮溴蝈 忄 腩汨"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "襄鬣蜞 篑蝠铋耱忸 URI"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"茵徕 滂疱牝眍 溧 铒疱溴腓蝈 URI 玎 漕耱 漕 镳桧蝈疣. URI 蝠徕 溧 "
-"桤嵇腠 桦 CUPS 桦 Foomatic 耧弼梏桕圉梃蝈. 悟徨脲驽蝈, 麇 礤 怦梓觇 "
-"蜩镱忮 URI 皴 镱滗瘊疰囹 铗 spooler-栩."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "项痱"
+"爨蝈 Internet 怵赅.\n"
+"漾玟嚅蝈 蜞赅忄, 赅蝾 鳅觏弪 磬 '袜耱痤'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "褥 磬 躅耱 玎 镳桧蝈疣 桦 IP"
+msgid "Fonts copy"
+msgstr "暑镨疣 梏蝾忮"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "皖戾瘊 磬 镱痱 蝠徕 溧 腩 麒耠 !"
+msgid "Automated"
+msgstr "棱蝾爨蜩玷疣"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "髓锺忄 桁 磬 躅耱 磬 镳桧蝈餫 桦 IP!"
+msgid "Do you want to test the configuration?"
+msgstr "锐赅蝈 腓 溧 蝈耱忄蝈 磬耱痤殛栩?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"青 溧 镥鬣蜞蝈 磬 socket 桦 TCP 镳桧蝈, 蝠徕 溧 镳邃铖蜞忤蝈 桁弪 磬 "
-"躅耱 磬 镳桧蝈疣 , 邂屙蝮嚯眍, 眍戾 磬 镱痱. 袜 HP JetDirect 聱疴, "
-"眍戾瘊 磬 镱痱 钺桕眍忮眄 9100, 磬 漯筱 聱疴 祛驽 溧 忄痂疣. 妈骝 "
-"瘊觐忸耱忸蝾 磬 踵痄箦疣 耔."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "橡桧蝈瘊 \"%s\" 徨 篑镥 镳屐圊磬 铗 ffice/OpenOffice.org/GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"如徨疱蝈 邃桧 铗 噔蝾爨蜩黜 铗牮栩栩 镳桧蝈痂 耧桉 泐疱 桦 恸忮溴蝈 "
-"桁 磬 躅耱 桦 IP 铒鲨铐嚯眍 眍戾 磬 镱痱 (镱漯噻徼疣 9100) 镱脲蝾."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket 物鲨 磬 镳桧蝈"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "疹耱 \"%s\", 镱痱 %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", 躅耱 \"%s\", 镱痱 %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "羊囵蜩疣礤 祓彐囹...."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer auto-detection"
-msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈"
+msgid "Save packages selection"
+msgstr "青镟玷 桤犷 磬 镟赍蜩"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "髓锺忄 桁 磬 NCP 铒帏赅 !"
+msgid "Remove the last item"
+msgstr "如蝠桠 镱耠邃龛 钺尻"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "髓锺忄 桁 磬 NCP 聱疴 !"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Print Queue Name"
-msgstr "褥 磬 镥鬣蝽囹 铒帏赅蜞"
+msgid "No net boot images created!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "漾疴 磬 镳桧蝈疣"
+msgid "use pptp"
+msgstr "桤镱腌忄 PPPTP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"青 溧 镥鬣蜩蝈 磬 NetWare 镳桧蝈 ,蝠徕 溧 珥噱蝈 桁孱 祗 恸珈铈眍\n"
-"噤疱襦 磬 聱疴, 赅牝 桁弪 磬 铒帏赅蜞,镱蝠遽栩咫耜铗 桁,镟痤豚. "
-"(玎徨脲骊! 蝾 祛驽 溧 疣珉梓屙 铗 TCP/IP 桁 磬 躅耱!)"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "如徼疣 篑塍汨蝈, 觐栩 蝠徕 溧 皴 矬耥囹 镳 矬耜囗 磬 爨磬蜞"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "物鲨 玎 NetWare 镳桧蝈"
+msgid "Learn how to use this printer"
+msgstr "袜篦弪 赅 溧 桤镱珉忄蝈 蝾玷 镳桧蝈"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"砚玮 忄 镳桧蝈 犏 Linux 聱疴 镱玮铍忄 Windows 爨龛 溧 皴 "
-"疋玮囹 犏 礤泐 赅蝾 觌桢眚.\n"
-"\n"
-"锐赅蝈 腓, 溧 镳钿骅蝈 磬耱痤殛栩 玎 蝾玷 镳桧蝈 赅牝 镳噔艴蝈 漕 皴汔?"
+msgid "Configure the network now"
+msgstr " 祛戾眚 磬耱痤殁囔 祓彐囹"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "如徨疱蝈 钽脲溧脲 聱疴,铗 觐轵 溧 镱塍麒蝈 镟赍蜩蝈"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"湾 恸珈铈眍耱 玎 疣犷蜞 忄 FAT , \n"
+"镱疣滂 镱塍麇磬蜞 沭屮赅: %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "闲拍酉信颇磐扰 抢 讶糜型窝!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "髓锺忄 桁 磬 SAMBA share !"
+msgid "Which sector do you want to move it to?"
+msgstr "袜 觐 皴牝铕 桉赅蝈 溧 泐 镳屐羼蜩蝈?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "茵徕 溧 狷溧 玎溧溴龛 桁弪 IP 噤疱襦 磬 聱疴 !"
+msgid "Do you want to click on this button?"
+msgstr "锐赅蝈 腓 溧 鳅觏弪 磬 蝾玷 狍蝾?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Auto-detected"
-msgstr "棱蝾爨蜩黜 玎皴麇"
+msgid "Bahamas"
+msgstr "拎踵扈"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "朽犷蝽 沭箫"
+msgid "Manual configuration"
+msgstr "喧黜 磬耱痤殛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Share name"
-msgstr "吾 桁"
+msgid "search"
+msgstr "蝥瘃"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP 磬 SMB 聱疴:"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"翌玷 镟赍 玎疱驿 爨痍桊囗囹 觌噔栲蝮痦 磬疱溽 /etc/sysconfig/"
+"keyboard.\n"
+" 祛驽 溧 狷溴 桤狃囗 桧耱痼戾眚 kbdconfig. 茵徕 溧 铖蜞忤蝈 "
+"蝾忄怅膻麇眍 玎 镱忮麇蝾 爨龛."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "疹耱 磬 SMB 聱疴"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (桧耱嚯圉 沭圄梓屙 漯嚅忮)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-" 狸 驽豚龛 镳桧蝈 铗牮栩 噔蝾爨蜩黜, 镳铖蝾 桤徨疱蝈 泐 铗 耧桉 "
-"蝾汔忄 漕徉忮蝈 桁 磬 镱蝠遽栩咫, 镟痤豚, /桦 疣犷蝽 沭箫 嚓 "
-"礤钺躅滂祛."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"青 溧 镥鬣蜞蝈 磬 SMB 镳桧蝈, 蝠徕 溧 溧溴蝈 桁弪頫n"
-"磬 SMB 躅耱 (青徨脲骊 ! 翌 祛驽 溧 疣珉梓眍 铗 TCP/IP 躅耱 !)\n"
-" 恸珈铈眍 IP 噤疱襦 磬 镳桧蝈瘃觇 聱疴, 赅牝 钺蝾 桁 磬\n"
-"镳桧蝈疣, 漕 觐轵 桉赅蝈 漕耱 镱漉钿 桁屙, 镟痤豚 桧纛痨圉\n"
-"玎 疣犷蝽囹 沭箫."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "袜耱痤殛 磬 SMB (Windows 9x/NT) 镳桧蝈"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "橡桧蝈 \"%s\" 磬 聱疴 \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", 镳桧蝈 \"%s\" 磬 聱疴 \"%s\""
+"Syslog 镳钽疣爨 觐蝾 祉钽 溴祛龛 桤镱腌忄 溧 玎镟玮囹 聱钺龛 鈂n"
+"疣珉梓龛 耔耱屐龛 羿殡钼 (腩泐忮). 念狃 镱耱眄 溧 桁囹 疣犷蝈."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "髓锺忄 桁 磬 铗溧脲麇 镳桧蝈 !"
+msgid "Unknown/Others"
+msgstr "湾桤忮耱龛/酿筱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "髓锺忄 桁 磬 桁 磬 躅耱 !"
+msgid "No TV Card detected!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "褥 磬 铗溧脲麇 镳桧蝈"
+msgid "Options"
+msgstr "物鲨"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "褥 磬 铗溧脲麇 躅耱"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "橡桧蝈瘊 \"%s\" 忮麇 铒疱溴脲 玎 镱腌忄礤 镱 镱漯噻徼疣礤."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"青 溧 桤镱腌忄蝈 铗溧脲麇 lpd 镳桧蝈, 蝠徕 溧 镳邃铖蜞忤蝈 桁屙囹 磬 "
-"躅耱 磬 镳桧蝈痦 聱疴 桁弪 磬 镳桧蝈疣 磬 蝾玷 聱疴."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "物鲨 磬 铗溧脲麇 lpd-镳桧蝈"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Manual configuration"
-msgstr "喧黜 磬耱痤殛"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "缅礤疣鲨 磬 cpu (磬镳: 8 玎 PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "茵徕 溧 恸忮溴蝈/桤徨疱蝈 镳桧蝈/篑蝠铋耱忸!"
+msgid "Auto-detected"
+msgstr "棱蝾爨蜩黜 玎皴麇"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-" (相疣脲腠 镱痱钼: /dev/lp0, /dev/lp1, ..., 聱铗忮蝰忄 磬 LPT1:, "
-"LPT2:, ..., 1-忤 USB 镳桧蝈: /dev/usb/lp0, 2-痂 USB 镳桧蝈: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "填, 桤徨疱蝈 镱痱 犏 觐轵 疋玎 镳桧蝈疣 忤."
+"袜 嵇 耱 溧 磬耱痤栩 觐祜 耔 蜞赅, 麇 溧 镱溴 软蝈痦弪 怵赅蜞\n"
+"耔. 蜞玷 恸珈铈眍耱, 漯筱 觐祜痂 腩赅腠囹 忤 祓彐  祛汔 溧\n"
+"桤镱腌忄 软蝈痦弪 怵赅蜞 磬 蝾玷 觐祜.\n"
+"\n"
+"悟徨脲驽蝈: 蝠徕 忤 铗溴脲 玎 蝾忄 祓彐钼 噤囡蝈, 玎 溧 篑蜞眍忤蝈 "
+"恸蝠屮磬蜞 耔 祓彐 (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"填, 桤徨疱蝈 镱痱 磬 觐轵 忄 镳桧蝈 玎赅麇 桦 恸忮溴蝈 桁 磬 "
-"篑蝠铋耱忸/桁 磬 羿殡 恸 怩钿眍蝾 镱脲"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "填, 桤徨疱蝈 皴痂屙 镱痱 犏 觐轵 疋玎 祛溴禚 忤."
+"爨 疋钺钿眍 耱 玎 1 塘 耱囵蜩疣 镱脲 ! 软耱嚯圉蜞  镳钿骅, 眍, "
+"玎 溧 耱囵蜩疣蝈 耔耱屐囹 耔,  蝠徕 溧 聱玟噤弪 耱囵蜩疣 镱脲 "
+"DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "翌忄 耧桉 磬 噔蝾爨蜩黜 铗牮栩 镳桧蝈痂."
+msgid "Refuse"
+msgstr "悟赅骅"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "青 皴汔, 爨 磬腓黜 嚯蝈痦囹桠"
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"暑眙桡箴圉蜞 磬 镳桧蝈疣  疣犷蜩 磬腠 噔蝾爨蜩黜. 狸 忄 镳桧蝈 "
-"礤 徼 觐疱牝眍 铗牮栩 桦 忤 镳邃镱麒蜞蝈 磬 磬耱痤栩 镳桧蝈疣, "
-"怅膻麇蝈 磬 \"喧黜 觐眙桡箴圉\"."
+"HardDrake 镳噔 镳钺 磬 踵痄箦疣, 邂屙蝮嚯眍 磬耱痤殁郳n"
+"眍/镳铎屙屙 踵痄箦."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "央邃龛蝈 镳桧蝈痂 襦 噔蝾爨蜩黜 铗牮栩. "
+msgid "Remote Printers"
+msgstr "悟溧脲麇 镳桧蝈"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "漾玟噔囗 纛痨囹桊囗 磬 羿殡 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"离蝈痦囹桠眍, 忤 祛驽 溧 玎溧溴蝈 桁 磬 篑蝠铋耱忸/羿殡 桤躅漤 疱"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"狸 蝾 礤 蝾玷 觐轵 桉赅蝈 溧 觐眙桡箴桊囹, 恸忮溴蝈 桁 磬 篑蝠铋耱忸/"
-"桁 磬 羿殡 恸 怩钿眍蝾 镱脲"
+msgid "Choose an existing LVM to add to"
+msgstr "如徨疱蝈 聱耱怏忄 LVM 玎 镳栳噔礤"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Available printers"
-msgstr "袜腓黜 镳桧蝈痂"
+msgid "xfs restart"
+msgstr "xfs 疱耱囵蜩疣"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "爨 磬戾疱 镳桧蝈!"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"橡桧蝈瘊 \"%s\" 忮麇 聱耱怏忄,\n"
+"磬桉蜩磬 腓 桉赅蝈 溧 镳彗囡桫弪 磬耱痤殛囹 ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "妈 蝠徕 溧 恸忮溴蝈 篑蝠铋耱忸 桦 桁 磬 羿殡!"
+msgid "No partition available"
+msgstr "爨 腩忮 磬 疣顼铍铈屙桢"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+msgid "Use the scanners on hosts: "
msgstr ""
-"爨 磬戾疱 腩赅脲 镳桧蝈! 青 溧 桧耱嚯桊囹 瘊黜 镳桧蝈, 恸忮溴蝈 桁 "
-"磬 篑蝠铋耱忸/桁 磬 羿殡 恸 怩钿眍蝾 镱脲 (相疣脲腠 镱痱钼 /dev/lp0, /"
-"dev/lp1, ..., 聱铗忮蝰忄 磬 LPT1:, LPT2:, ..., 1-忤 USB 镳桧蝈: /dev/usb/"
-"lp0, 2-痂 USB 镳桧蝈: /dev/usb/lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printer"
-msgstr "祟赅脲 镳桧蝈"
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB 镳桧蝈 \\#%s"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Domain Name Resolver"
+msgstr "褥 磬 漕戾轫"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "橡桁屦 磬 镟疣脲脲 镱痱 \\#%s"
+msgid "Encryption key (again)"
+msgstr "孰 玎 牮栾蜩疣礤 (铗眍忸)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "橡桧蝈 \"%s\" 磬 SMB/Windows 聱疴 \"%s\""
+msgid "Samba share name missing!"
+msgstr "髓锺忄 桁 磬 SAMBA share !"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "甜彐钼 镳桧蝈 \"%s\", 镱痱 %s"
+msgid "True Type install done"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Detected %s"
-msgstr "青皴麇 %s"
+msgid "Detection in progress"
+msgstr "悟牮桠囗 镳钽疱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", 镳桧蝈 \"%s\" 磬 SMB/Windows 聱疴 \"%s\""
+msgid "Build Whole Kernel -->"
+msgstr "项耱痤忄 腩蝾 漯 -->"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", 祓彐钼 镳桧蝈 \"%s\", 镱痱 %s"
+msgid "Welcome to %s"
+msgstr "念狃 漕 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "央铈弪 滂耜弪 玎 钺眍忄礤 磬 祛潴腓 篑蝠铋耱忸 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "Bootsplash"
msgstr ""
-"棱蝾爨蜩黜 铗牮桠 镳桧蝈痂 疋玎龛 爨龛 疣犷蝈 镱 Microsoft Windows"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈痂 疋玎龛 滂疱牝眍 犏 腩赅腠囹 祓彐"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
+msgstr ""
+"央邃龛 镳桧蝈餦n"
+"\n"
+"%s%s\n"
+" 滂疱牝眍 疋玎 犏 忄蜞 耔耱屐"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈痂 疋玎龛 犏 蜞玷 爨磬"
+msgid "Printer sharing on hosts/networks: "
+msgstr "橡桧蝈 镱溴脲 磬 躐铗钼/祓彐: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"念狃 漕 磬 锑泓铖龛赅 玎 觐眙桡箴桊囗 磬 橡桧蝈餦n"
-"\n"
-"亦  忤 镱祛沩 溧 桧耱嚯桊囹 忄蝈 镳桧蝈痂 疋玎龛 犏 觐祜.\n"
-"\n"
-"狸 桁囹 镳桧蝈() 疋玎龛 犏 蜞玷 爨磬, 怅膻麇蝈 汨, 蜞赅 麇 蝈 溧 "
-"祛汔 溧 皴 觐眙桡箴桊囹 噔蝾爨蜩黜.\n"
-"\n"
-"助觏弪 磬 \"央邃忄\" 觐汔蝾 耱 泐蝾忤, 磬 \"橡尻忄\" 嚓 礤 桉赅蝈 "
-"溧 磬耱痤殁囹 镳桧蝈痂蝈 皴汔."
+"暑爨礓囹 \"%s\" 聱 蜞赅 忤 镱玮铍忄 溧 镱镳噔栩 磬耱痤殛栩 磬 铒鲨栩 "
+"玎 铒疱溴脲磬 疣犷蜞 磬 镳桧蝈疣. 橡铖蝾 漕徉忮蝈 鲥豚龛蝈 磬耱痤殛 犏 "
+"觐爨礓龛 疱, 磬镳. \"%s <file>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+" 觐 耠篦噼, %s 漯嚅忮瘊 皴 眢驿噱 铗 漕嵇腠栩咫磬 桧纛痨圉, 玎\n"
+"溧 疣犷蜩 觐疱牝眍, 恸镳尻 麇 眍痨嚯眍 疣犷蜩 徨 礤. 棋豚弪 腓 "
+"溧镱溧溴蝈\n"
+"漕嵇腠栩咫龛 铒鲨 玎 礤泐 桦 溧 疣琊屮栩 磬 漯嚅忮疣 溧 镱蝥瘃 "
+"桧纛痨圉蜞\n"
+"铗 觐蝾 皴 眢驿噱 ? 项 镳桧鲨 蝾忄 祛驽 溧 玎徼 觐祜 忤, 眍 爨 溧 "
+"泐 镱怵邃."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"%s\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"Click on Configure to launch the setup wizard."
msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"念狃 漕 桧耱痼戾眚 玎 耧钿咫礤 磬 软蝈痦弪 怵赅蜞 !\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+"助觏弪 ``袜耱痤'', 嚓 桉赅蝈 溧 耱囵蜩疣礤 篑蜞眍忄 爨泓铖龛."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ""
+msgid "Cuba"
+msgstr "鼠徉"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr ""
+msgid "Searching for new printers..."
+msgstr "寅瘃 玎 眍忤 镳桧蝈痂..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
+msgid "Belize"
+msgstr "铃腓"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "袜耱痤殛 磬 镳桧蝈疣 \"%s\" ..."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " (multi-session)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "寅瘃 玎 眍忤 镳桧蝈痂..."
+msgid "Kernel Boot Timeout"
+msgstr "如鬣赈囗 玎 耱囵蜩疣礤 磬 漯铗"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"抢僚伺剖: 玎忤耔祛耱 铗 祛溴豚 镳桧蝈 镥鬣蜞蜞 耔耱屐 漕 %d MB "
-"漕嵇腠栩咫眍 耦趄箦  狷溴 桧耱嚯桊囗."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "谚泱痦 腓 耱, 麇 桉牝 溧 磬耱痤栩 镥鬣 玎 蜞玷 爨磬?\n"
+"枢痱囹 忤 祛驽 溧 桁 镱滗瘊骊 磬 踵痄箦痦 3D 篑觐疱龛, 眍 襦祛 Xfree %"
+"s.\n"
+"枢痱囹 忤 皴 镱滗驵 铗 XFree %s, 觐轵 祛驽 溧 桁 镱-漕狃 镱滗瘊骊 磬 "
+"2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "锐赅蝈腓 溧 疣琊屮栩 镥鬣 玎 镳桧蝈痂蝈 耧铎屙囹 泐疱?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "项祛桕 玎 疣玟咫桧 磬 腩忮 磬 DrakX 磬戾痂 耠邃龛蝈 疱龛:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "锐赅蝈 腓 溧 疣琊屮栩 镥鬣 磬 镳桧蝈痂蝈 腩赅腠囹 祓彐?\n"
+msgid "Hungarian"
+msgstr "禹汔瘃赅"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"锐赅蝈 腓 溧 疣琊屮栩 镥鬣 磬 镳桧蝈痂蝈 耧铎屙囹 泐疱 桦 磬 镳桧蝈痂蝈 "
-" 腩赅腠囹 祓彐?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (俞邃弪 皴, 麇 镳桧蝈痂蝈 襦 疋玎龛 怅膻麇龛).\n"
+"项耦麇蝈 漕耱噔麒赅 耔.\n"
+" 狸 礤 耧桉, 桤徨疱蝈 Unlisted"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "爨 磬戾疱龛 镳桧蝈痂 怅膻麇龛 滂疱牝眍 犏 爨磬蜞 忤"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "棱蝾爨蜩黜 耔眭痤龛玎鲨 磬 怵屐弪 (桤镱腌忄 NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"褥 %d 礤桤忮耱龛 镳桧蝈痂 怅膻麇龛 犏 忄蜞 耔耱屙爨"
+msgid "8 MB"
+msgstr "8 塘"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"褥 邃桧 礤桤忮耱屙 镳桧蝈 怅膻麇 犏 忄蜞 耔耱屙爨"
+msgid "LDAP Server"
+msgstr "LDAP 聱疴"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"央邃龛 镳桧蝈餦n"
-"\n"
-"%s%s\n"
-" 滂疱牝眍 疋玎 犏 忄蜞 耔耱屐"
+"PCMCIA 镱滗骊囹 钺桕眍忮眄 镱滗驵 礤 赅蝾 ethernet 祛溴扈 鈂n"
+"laptop-. 翌忄 爨 溧 皴 耱囵蜩疣 镳邃 溧 狷溴 磬耱痤屙, 蜞赅 麇 錦n"
+"镱-漕狃 溧 桁囹 桧耱嚯桊囗 磬 爨龛, 觐栩 礤 皴 眢驿 铗 礤."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"央邃龛 镳桧蝈餦n"
-"\n"
-"%s%s\n"
-" 滂疱牝眍 疋玎龛 犏 忄蜞 耔耱屐"
+msgid "Choose your country"
+msgstr "如徨疱蝈 耱疣磬蜞 耔"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"央邃龛蝈 镳桧蝈痂\n"
"\n"
-"%s%s\n"
-"襦 滂疱牝眍 疋玎龛 犏 忄蜞 耔耱屐"
+"- 谚耱屐龛 羿殡钼:\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr " %d 礤桤忮耱龛 镳桧蝈痂"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Standalone Tools"
+msgstr "暑礴铍龛 桧耱痼戾眚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr " 邃桧 礤桤忮耱屙 镳桧蝈"
+msgid "Where"
+msgstr "竖溴"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "橡钼屦赅 磬 忄蜞 耔耱屐..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "绣耱囵蜩疣 XFS"
+msgid "but not matching"
+msgstr "眍 礤 聱怙噤"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"殷 祛驽 溧 桤徨疱蝈 嚯蝈痦囹桠屙 漯嚅忮 (OSS 桦 ALSA) 玎 忄蜞 玮箨钼 "
+"赅痱 (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "橡桁屦 磬 镳噔桦龛 IP:\n"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "埋梓觐 镳噔桦眍 腓 ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "髓锺忄 桁 磬 NCP 聱疴 !"
+msgid "Configuring PCMCIA cards..."
+msgstr "袜耱痤殛 磬 PCMCIA 赅痱栩 ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "腓锺忄 kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "橡桧蝈 磬 铗溧脲麇 CUPS 聱疴"
+msgid "Encryption key"
+msgstr "孰 玎 牮栾蜩疣礤"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "如蝠桠囗 磬 铒帏赅蜞"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "玎皴麇磬 %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "暑脲漤 务蝠钼"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "念徉忤 镱蝠遽栩咫"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "软耱嚯圉蜞 磬 bootloader 镳钼嚯屙. 项忤 皴 耠邃磬蜞 沭屮赅:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI 赅磬"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP 噤疱 磬 躅耱/祓彐:"
+msgid "Set this printer as the default"
+msgstr "物疱溴腓 蝾玷 镳桧蝈 玎 镱腌忄礤 镱 镱漯噻徼疣礤"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"翌玷 噤疱/躅耱 忮麇 耧桉, 蝾 礤 祛驽 溧 狷溴 漕徉忮 铗眍忸.\n"
+msgid "partition %s"
+msgstr " %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "满忮溴龛 躅耱/祓彐 IP 礤 镳噔桦屙.\n"
+msgid "Paranoid"
+msgstr "相疣眍梓眍"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "如犷 磬 祓彐 桦 躅耱 玎 觐轵 腩赅腠 镳桧蝈  狷溴 疣琊屮屙:"
+msgid "<-- Del User"
+msgstr "<-- 如蝠桠 镱蝠遽栩咫"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "项溴礤 磬 腩赅腠 镳桧蝈痂"
+msgid "Location on the bus"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "如蝠桠囗 磬 桤狃囗 躅耱/祓彐"
+msgid "No printer found!"
+msgstr "爨 磬戾疱 镳桧蝈!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "绣溧牝桊囗 磬 桤狃囗 躅耱/祓彐"
+msgid "the vendor name of the device"
+msgstr "桁弪 磬 镳铊玮钿栩咫 磬 篑蝠铋耱忸蝾"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "念徉 躅耱/祓彐"
+msgid "Erase entire disk"
+msgstr "如蝠栝 鲥腓 滂耜"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"翌忄 襦 爨龛蝈 祓彐栩 玎 觐栩 腩赅腠 疋玎龛蝈 镳桧蝈痂  狷溧 "
-"漕耱龛:"
+msgid " (Default)"
+msgstr " (项 镱漯噻徼疣礤)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "棱蝾爨蜩黜 觐疱牿 磬 CUPS 觐眙桡箴圉"
+msgid "Automatic reconfiguration"
+msgstr "棱蝾爨蜩黜 疱觐眙桡箴圉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "橡铎磬 耔耱屐囹 玎 镥鬣"
+msgid "Receiving Speed:"
+msgstr "殃铕铖 磬 镱塍鬣忄礤:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
+msgid "Turks and Caicos Islands"
+msgstr "隐痍 枢殛铖 务蝠钼"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "妙蝾忸"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "镳噔"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP 磬 CUPS 聱疴"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "No remote machines"
-msgstr "爨 铗溧脲麇龛 爨龛"
+msgid "<- Previous"
+msgstr "<- 橡邃桫屙"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "项蝠遽栩咫耜 磬耱痤殛"
+msgid "Internet Connection Sharing configuration"
+msgstr "袜耱痤殛 磬 耧钿咫礤蝾 磬 软蝈痦弪 怵赅蜞"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "橡桧蝈 镱溴脲 磬 躐铗钼/祓彐: "
+msgid "Toggle between flat and group sorted"
+msgstr "橡邂觌忄礤 戾驿 眍痨嚯眍 耦痱桊囗 镱 沭箫"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "棱蝾爨蜩黜 铗牮桠 磬腓黜栩 镳桧蝈痂 磬铗溧脲麇龛蝈 爨龛"
+msgid "Themes"
+msgstr "义扈"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "橡桧蝈痂蝈 磬 蜞玷 爨磬 漕耱龛 玎 漯筱栩 觐祜痂"
+msgid "Options: %s"
+msgstr "物鲨: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"妈 聱 疱忄蝈, 溧腓 镳桧蝈痂蝈 磬 铗溧脲麇龛蝈 爨龛  狷溧 "
-"噔蝾爨蜩黜 漕耱龛 磬 蜞玷 爨磬."
+" 祛戾眚 桤镱腌忄蝈 %s 赅蝾 镳钽疣爨 玎 耱囵蜩疣礤.\n"
+"助觏弪 磬 袜耱痤殛, 玎 溧 耱囵蜩疣蝈 篑蜞眍忄 爨泓铖龛."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"殷 祛驽 溧 疱蝈 溧腓 镳桧蝈痂蝈 疋玎龛 犏 忄蜞 爨磬  狷溧 "
-"漕耱龛 铗 铗溧脲麇龛蝈 爨龛 铗 觐."
+msgid "OKI winprinter configuration"
+msgstr "袜耱痤殛 磬 OKI Winprinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "暑眙桡箴圉 磬 CUPS 镱溴脲 镳桧蝈"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "砚弪 烹屙"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "棱蝾爨蜩黜 铗牮桠囗 磬 镳桧蝈 (祟赅脲, TCP/Socket, SMB 镳屙蝈痂)"
+msgid "Security Level"
+msgstr "丸忸 磬 玎蜞"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"觐 弪囡 礤 襦 玎恸瘌屙.\n"
"\n"
-"悟溧脲麇龛蝈 磬 CUPS 聱疴 镳桧蝈痂 礤 蝠徕 溧 磬耱痤殁囹錦n"
-"蝮; 蝈玷 镳桧蝈痂  狷溧 玎皴麇龛 噔蝾爨蜩黜."
+"袜桉蜩磬 腓 桉赅蝈 溧 桤脲珏蝈 皴汔 ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "枢 疋玎 镳桧蝈瘊 ?"
+msgid "Sudan"
+msgstr "洋溧"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "如徨疱蝈 怵赅 犏 镳桧蝈疣"
+msgid "Polish (qwertz layout)"
+msgstr "项腭赅 (QWERTZ 磬疱溽)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "谚痂"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"念狃 漕 %s - 桤徼疣礤 磬 铒屦圉桀眄 耔耱屐!\n"
+"\n"
+"如徨疱蝈 铒屦圉桀眄囹 耔耱屐 铗 泐痦 耧桉 桦 桤鬣赅轵錦n"
+"%d 皴牦礓 玎 镱漯噻徼疣 耱囵蜩疣礤.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "项痱筱嚯耜"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "嚓 玎溧溴眍 溧, 镳钼屦忄 铗忸疱龛蝈 镱痱钼"
+msgid "Loopback file name: "
+msgstr "褥 磬 loopback 羿殡: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS 聱疴 蝠徕 溧 狷溴 恸 纛痨囹 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "嚓 玎溧屙 溧, 桤镳帙 镱 镱蜞 聱钺龛 玎 疱珞腧囹."
+msgid "Serbia"
+msgstr "佯"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "Newzealand"
msgstr ""
-"嚓 玎溧屙 溧, 镳钼屦忄 羿殡钼弪/滂疱牝铕梃蝈 漕耱龛 玎 镨襦礤 铗 "
-"怦尻."
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "嚓 玎溧屙 溧, 桤镳帙 疱珞腧囹 铗 镳钼屦赅蜞 磬 tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "亦玷 滂疱牝铕 蝠徕 溧 铖蜞礤 疣礻栩 磬 root 羿殡钼囹 耔耱屐."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "CapsLock key"
+msgstr "CapsLock 觌噔桫"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "软耱嚯桊囗 磬 bootloader"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "如徨疱蝈 赅镟鲨蝈 磬 镟戾蝌 磬 沭圄梓磬蜞 耔 赅痱"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "Dynamic IP Address Pool:"
+msgstr "象 滂磬扈麇 IP 噤疱:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM 桁 ?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "袜戾疱龛 襦 %s %s 桧蝈痿彘耔"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "sticky-bit"
+msgstr "sticky-徼"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "软耱嚯桊嚅"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "皖忸 桁 磬 镳桧蝈"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"鲤泱戾眚: (umask)\n"
-"\n"
-"玉蜞眍忄 玎 root umask."
+msgid "Card IRQ"
+msgstr "IRQ 磬 赅痱囹"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"鲤泱戾眚: (length, ndigits=0, nupper=0)\n"
-"\n"
-"青溧忄 玎 镟痤豚蜞 扈龛爨腠囹 潸腈桧, 扈龛爨脲 狃铋 鲨麴 扈龛爨脲 "
-"狃铋 汶噔龛 狍赈."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "腩沅疱殛"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "如徨疱蝈 綦铒 篑蝠铋耱忸, 犏溴蝾 溧 磬镳噔栩 耱囵蜩疣 滂耜弪"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" 狸蜩忤疣/青狃囗忄 彐邃礤忭 镳钼屦赅 玎 玎蜞"
+msgid "LILO with text menu"
+msgstr "LILO 蝈犟蝾忸 戾睨"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "埋梓觐 (徨 firewall)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "茵徕 溧 玎溧溴蝈 钺噻 磬 漯铗"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 磬 USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Do"
+msgstr "袜镳噔"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "砚玮囗 钽脲溧腠 聱疴 玎 镱塍鬣忄礤 磬 耧桉 镟赍蜩蝈"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "髓蜮栝耜 AZERTY (耱囵)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "琉噻桦耜 (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "IP address of host/network:"
+msgstr "IP 噤疱 磬 躅耱/祓彐:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
+"脲眚囹 玎 镳钽疱 y 觐铕滂磬蜩\n"
+"铗 泐痦 "
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "System installation"
+msgstr "软耱嚯圉 磬 耔耱屐"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "砚弪 妈眈屙 灭屙噤桧"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/脏殡/_悟忸痂"
#: ../../security/help.pm:1
#, c-format
@@ -12518,873 +12063,703 @@ msgid ""
"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "Location of auto_install.cfg file"
+msgstr "体耱铒铍铈屙桢 磬 auto_install.cfg 羿殡"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "如鬣赈囗 磬 Open Firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"项玮铍忄/青狃囗忄 滂疱牝眍 怆桤囗 磬 root."
+msgid "Hungary"
+msgstr "禹汔痂"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"项玮铍忄/青狃囗忄 铗溧脲麇眍 怆桤囗 磬 root."
+msgid "Total progess"
+msgstr "吾 镳钽疱"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"项玮铍忄/青狃囗忄 镳羼蜞痱桊囗 铗 镱蝠遽栩咫 磬 觐礴铍."
+msgid "Color configuration"
+msgstr "暑眙桡箴圉 磬 鲡"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "New Zealand"
+msgstr "皖忄 清豚礓"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"项玮铍忄/青狃囗忄 噔蝾爨蜩黜 怆桤囗."
+"洛麇 桁 觐 钽疣龛麇龛, 镱忮麇 噔蝾爨蜩黜 镳钼屦觇  皴 桤嵇腠忄 "
+"怦赅 忮麇."
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"项玮铍忄/青狃囗忄 icmp echo."
+msgid "please choose the date to restore"
+msgstr "祛, 桤徨疱蝈 溧蜞蜞 玎 恸珩蜞眍忄礤"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Switching from ext2 to ext3"
+msgstr "橡艴钿 铗 ext2 犏 ext3"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "疹豚礓耜 理蜩腓"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"项玮铍忄/青狃囗忄 broadcasted icmp echo."
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"项玮铍忄/青狃囗忄 聱钺龛 玎 IPv4 沭屮觇."
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "冷扈龛耱疣蝾 镱 耔泱痦铖蝌 (腩汨 桦 烹.镱)"
+msgid "and %d unknown printers"
+msgstr " %d 礤桤忮耱龛 镳桧蝈痂"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"凌犭桀蝈赅, 觐蝾 铖桡箴忄 玎蜞 铗 a蜞觇 镳屣忄礤 磬 狍翦 纛痨囹龛 "
-"耱痂磴钼."
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "如镱腌忄轵 libsafe 玎 聱疴"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "湾 磬戾疱磬 ISDN PCI 赅痱. 填 桤徨疱蝈 铗 耠邃忄 尻疣."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Security level"
-msgstr "丸忸 磬 耔泱痦铖"
+msgid "GB"
+msgstr "昧"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "填, 桤徨疱蝈 龛忸 磬 耔泱痦铖"
+msgid "Please give a user name"
+msgstr "填, 玎溧轵 镱蝠遽栩咫耜 桁"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "务眍忭 铒鲨 磬 DrakSec "
+msgid "Enable CD Boot?"
+msgstr "羊囵蜩疣礤 铗 CD ?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+msgid " enter `void' for void entry"
msgstr ""
-"项漕犴 磬 镳邃桫眍蝾 龛忸, 眍 耔耱屐囹 磬嵇腠 玎蜮铕屙.\n"
-"丸忸蝾 磬 耔泱痦铖 磬 爨犟桁箪 耔."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+msgid "on Hard Drive"
msgstr ""
-" 蝾忄 龛忸 磬 耔泱痦铖, 镱腌忄礤蝾 磬 耔耱屐囹 赅蝾 聱疴 耱噔 "
-"恸珈铈眍.\n"
-"谚泱痦铖蝌 皴汔 漕耱囹眍 泐爨 溧 皴 桤镱腌忄 耔耱屐囹 赅蝾\n"
-"聱疴 镳桢爨 怵觇 铗 祉钽 觌桢眚. "
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"洛麇 桁 觐 钽疣龛麇龛, 镱忮麇 噔蝾爨蜩黜 镳钼屦觇  皴 桤嵇腠忄 "
-"怦赅 忮麇."
+msgid "Winmodem connection"
+msgstr "Winmodem 怵赅"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"翌忄 耱囗溧痱磬蜞 耔泱痦铖 镳屣铕栩咫磬 玎 觐祜, 觐轵  狷溴 "
-"桤镱腌忄 溧 皴 疋玮 犏 软蝈痦弪 赅蝾 觌桢眚."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"相痤豚蜞 皴汔 怅膻麇磬, 眍 桤镱腌忄礤蝾 赅蝾 祓彐钼 觐祜 礤 "
-"镳屣铕栩咫眍."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-"翌忄 龛忸 皴 桤镱腌忄 忭桁囗桢. 翌忄 赅疣 耔耱屐囹 忤 镱-脲耥 玎\n"
-"箫铗疱徉, 眍 镱-黧怦蜮栩咫眍: 礤 蝠徕 溧 狷溴 桤镱腌忄磬 磬 爨龛\n"
-"疋玎龛 漯筱 桦 镱 软蝈痦弪. 爨 漕耱 镟痤腓."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "相疣眍梓眍"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"爨 漕耱囹眍 swap 玎 镳桕膻麾囗 磬 桧耱嚯圉蜞, 祛 漕徉忮蝈 爨腙"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "项-忤耦觐"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "项痱"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "High"
-msgstr "妈耦觐"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Poor"
-msgstr "祟"
+msgid "Which is your timezone?"
+msgstr "暑 怵屐邂囹 忤 珙磬 ?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "念狃 漕 镳 Cracker-栩"
+msgid "Guinea"
+msgstr "免桧"
-#: ../../standalone/XFdrake:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "填 怆彗蝈 铗眍忸 %s, 玎 溧 嚓蜩忤疣蝈 镳铎屙栩"
+msgid "The system is now connected to the Internet."
+msgstr "谚耱屐囹 祛戾眚 疋玎磬 犏 软蝈痦弪."
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "填 桤脲珧 铗 皴耔蜞 桤镱腌忄轵 Ctrl-Alt-BackSpace"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "捩龛 燕礓忤麇忤 务蝠钼 捩磬 逆铕滏"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Japan (broadcast)"
msgstr ""
-"/etc/hosts.allow /etc/hosts.deny 忮麇 襦 觐眙桡箴桊囗 - 礤 襦 镳铎屙屙"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "茵徕 溧 聱玟噤弪 嵇疴 /etc/dhcpd.conf!"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "湾 徨 沭屮眍! - 泥腓 mkisofs 桧耱嚯桊囗?"
+msgid "Mozambique"
+msgstr "填玎灬桕"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Icon"
+msgstr "汝铐"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "爨 綦铒 篑蝠铋耱忸!"
+msgid "Please choose what you want to backup"
+msgstr "填 桤徨疱蝈 赅赈 桉赅蝈 溧 玎镟玷蝈"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "噪铒栩 祛驽 溧 狷溴 桤忄溴眍 皴汔"
+msgid "256 colors (8 bits)"
+msgstr "256 鲡蜞 (8 徼蜞)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "爨 漕耱 漕 綦铒!"
+msgid "Read-write"
+msgstr "族蝈礤-玎镨"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "央铈弪 綦铒 滂耜弪:"
+msgid "Size: %s\n"
+msgstr "朽珈屦: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Write Config"
-msgstr "青镨疋 磬耱痤殛"
+msgid "Hostname: "
+msgstr "褥 磬 躅耱:"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "象 滂磬扈麇 IP 噤疱:"
+msgid "Chunk size %s\n"
+msgstr "朽珈屦 磬 镟瘅弪 %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Build the future of Linux!"
msgstr ""
-"项忮麇蝾 铗 蝈玷 耱铋眍耱 襦 桤怆鬻屙鑌n"
-"铗 忄蜞 疣犷蝈 耔耱屐.\n"
-"妈 祛驽 溧 汨 镳铎屙栩 镳 礤钺躅滂祛耱."
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "暑眙桡箴桊囗 磬 dhcpd 聱疴"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "IP Range End:"
-msgstr "署嚅 磬 IP 钺踱囹:"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr "袜鬣腩 磬 IP 钺踱囹:"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS 聱疴"
+msgid "Local Printer"
+msgstr "祟赅脲 镳桧蝈"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Name:"
-msgstr "褥 磬 漕戾轫:"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
+msgstr ""
+" 棱蝾瘃觇 镳噔 (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
+"\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast 噤疱:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "锑耜 磬 镱潇疱驵:"
+msgid "ADSL connection"
+msgstr "ADSL 怵赅"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Routers:"
-msgstr "畜蝈痂:"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Netmask:"
-msgstr "甜彐钼 爨耜:"
+msgid "Error!"
+msgstr "灭屮赅 !"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "项潇疱驵:"
+msgid "cable connection detected"
+msgstr "玎皴麇磬 赅徨腠 怵赅"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-"茵徕 溧 镳羼蜞痱桊囹 体龛滏 磬 蔫耧脲 玎 溧 桁囹 弭尻 镳铎屙栩. \n"
-"(钺耠箧忄礤 dm restart - 铗 觐礴铍囵)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "袜耱痤殛 磬 dhcpd..."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete Client"
-msgstr "如蝠桠 觌桢眚"
+msgid "/_Report Bug"
+msgstr "/_软纛痨桊嚅 玎 狷"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- 绣溧牝桊 觌桢眚"
+msgid "Resize"
+msgstr "橡铎屙 泐脲扈磬蜞"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "念徉 觌桢眚 -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP 觌桢眚"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP 觌桢眚"
+msgid "Dominica"
+msgstr "念扈龛赅"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "type: %s"
-msgstr "蜩: %s"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- 如蝠桠 镱蝠遽栩咫"
+msgid "Resolution: %s\n"
+msgstr "朽玟咫栩咫磬 耧铖钺眍耱: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Add User -->"
-msgstr "念徉 镱蝠遽栩咫 -->"
+msgid "matching"
+msgstr "聱怙噤屙桢"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
+"爨 漕耱 溧 祛潴腓蝈 磬 漯铗 聱铗忮蝰蜮帙 磬 忄 (羿殡 %s 腓锺忄), "
+"蝾忄 铉磬鬣忄, 麇 忄蝾 綦铒 礤 耔眭痤龛玷疣眍 桧耱嚯圉桀眄 眍耔蝈 "
+"(祛 磬镳噔弪 眍忸 boot 綦铒)"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "如蝠桠 怦梓觇 NBI"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- 如蝠桠"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr "翌忄  铗礤戾 觐腙 扈眢蜩."
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "项耱痤忄 怦梓觇 漯 -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"填, 桤徨疱蝈 忮痦 镱痱. 袜镳桁屦, 镱痱 COM1 镱 Windows 镱 GNU/Linux\n"
+"皴 磬痂鬣 ttyS0."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "爨 NIC 桤狃囗!"
+msgid "The following packages are going to be removed"
+msgstr "央邃龛蝈 镟赍蜩  狷溧 镳屐圊磬蜩"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "项耱痤忄 邃桧梓屙 NIC -->"
+msgid "Connect to the Internet"
+msgstr "砚骅 皴 犏 软蝈痦弪"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "爨 桤狃囗 漯!"
+msgid "Use existing partitions"
+msgstr "如镱玮囗 磬 聱耱怏忄 "
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "项耱痤忄 腩蝾 漯 -->"
+msgid "Canadian (Quebec)"
+msgstr "枢磬漶赅 (殊遽尻)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "玉蝠铋耱忸 磬 扈囹: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" 岭嚆钿囵眍耱:\n"
-"\t- LTSP 橡铄牝 http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"袜牮,  狷溴蝈 镱镨蜞龛 溧腓 桉赅蝈 溧 忤驿囹 沭圄梓龛 桧蝈痿彘 镳鑌n"
+"玎疱驿囗. 悟徨脲驽蝈, 麇 蝾玷 恸镳铖  忤 狷溴 玎溧溴 溧驽 嚓 桤徨疱蝈,\n"
+"溧 礤 蝈耱忄蝈 磬耱痤殛囹. 西邂桎眍, 徼躜 铗泐忸痂腓 \"湾\", 嚓 "
+"爨磬蜞\n"
+" 疣犷蜩 赅蝾 聱疴 桦 嚓 爨 篑镥 磬耱痤屙 滂耧脲."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "彦汔  磬耱痤桁 %s 怵赅蜞."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert 钺邃桧忄"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-"\n"
-" 棱蝾瘃觇 镳噔 (C) 2002 铗 MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "如蝠桠囗 磬 铒帏赅蜞"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "念徉/如蝠桠 觌桢眚"
+msgid "Language"
+msgstr "如犷 磬 彗桕"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "念徉/如蝠桠 镱蝠遽栩咫"
+msgid "Printer model selection"
+msgstr "如犷 祛溴 磬 镳桧蝈疣"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Net Boot Images"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"央邃 镳铎磬 磬 蜩镟 磬 豚 %s, 怦梓觇 溧眄 恸瘐 礤泐  狷溧 玎泱徨龛"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d 皴牦礓"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Stop Server"
-msgstr "扬桊 聱疴"
+msgid "Insert a blank floppy in drive %s"
+msgstr "央铈弪 镳噻磬 滂耜弪 篑蝠铋耱忸 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start Server"
-msgstr "羊囵蜩疣 聱疴"
+msgid "A valid URI must be entered!"
+msgstr "茵徕 溧 狷溴 恸忮溴 忄腓溴 URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "如觌忄 漾疴"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "袜戾疱 \"%s\" 桧蝈痿彘. 锐赅蝈 腓 溧 泐 桤镱腌忄蝈?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Enable Server"
-msgstr "玛膻麾 漾疴"
+msgid "Re-configure interface and DHCP server"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "暑眙桡箴圉 磬 义痨桧嚯屙 漾疴 Mandrake "
+msgid "Sound configuration"
+msgstr "袜耱痤殛 玎 玮箨"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "如蝠桠 镱耠邃龛 钺尻"
+msgid "Photo test page"
+msgstr "义耱钼 耱疣龛鲟 聱 耥桁赅"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add an item"
-msgstr "念徉礤 磬 钺尻"
+msgid "Custom disk partitioning"
+msgstr "孰桢眚耜 疣玟咫礤 磬 滂耜"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "棱蝾爨蜩黜 软耱嚯桊"
+msgid "Enter Printer Name and Comments"
+msgstr "满忮溴蝈 桁 磬 镳桧蝈 觐戾眚囵"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"蔫耜弪囹 篑镥 聱玟噤屙.\n"
-"彦汔 祛驽蝈 溧 镳彖沭噱蝈 桧耱嚯圉蜞."
+"央邃龛蝈 镳桧蝈痂\n"
+"\n"
+"%s%s\n"
+"襦 滂疱牝眍 疋玎龛 犏 忄蜞 耔耱屐"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Congratulations!"
-msgstr "项玟疣怆屙 !"
+msgid "type: %s"
+msgstr "蜩: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"念狃 漕.\n"
-"\n"
-"相疣戾蝠栩 玎 噔蝾桧耱嚯圉 襦 磬腓黜 皴牿蜞 忸"
+msgid "Slovakian (QWERTY)"
+msgstr "央钼帏赅 (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "项溷铗 滂耜弪 噔蝾爨蜩黜 桧耱嚯圉"
+msgid "No Sound Card detected!"
+msgstr "爨 磬戾疱磬 玮箨钼 赅痱!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "manual"
-msgstr "瘊黜"
+msgid "Mouse Port"
+msgstr "项痱 磬 扈囹"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"填, 桤徨疱蝈 玎 怦赅 耱赅, 溧腓  皴 镳彖沭噱 赅蝾 镳 桧耱嚯圉蜞, "
-"桦  狷溴 瘊黜"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "袜耱痤殛 磬 噔蝾爨蜩黜栩 耱觇"
+"茵徕 溧 镳羼蜞痱桊囹 体龛滏 磬 蔫耧脲 玎 溧 桁囹 弭尻 镳铎屙栩. \n"
+"(钺耠箧忄礤 dm restart - 铗 觐礴铍囵)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "replay"
-msgstr "镱怛铕"
+msgid "Ftp Server"
+msgstr "Ftp 漾疴"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto Install Configurator"
-msgstr "袜耱痤轺桕 磬 噔蝾爨蜩黜 桉眚嚯圉"
+msgid "%s fonts conversion"
+msgstr ""
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "湾 祛汔 溧 磬戾 眢骓 赅痱桧赅 `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "填, 桤徨疱蝈 蜩镟 磬 磬蜞 犏 觐蝾 疋玎磬 扈囹 忤."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "灭屮赅 !"
+msgid "Uganda"
+msgstr "鱼囗溧"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "暑祛痂"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
+"\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
+"彦汔  磬耱痤桁 %s 怵赅蜞.\n"
"\n"
+"袜蜩耥弪 OK, 玎 溧 镳钿骅蝈."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "绣骅 磬 Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" 钺眍忄龛 2002 MandrakeSoft 铗 Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "吾桕眍忮眄 3-狍蝾眄 扈"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" 棱蝾瘃觇 镳噔 (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
-"\\@epita.fr>"
+msgid "Select another media to restore from"
+msgstr "如徨疱蝈 漯筱 眍耔蝈 玎 恸珩蜞眍忄礤 铗 礤泐"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "杨趄箦疱 戾龛滏"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -13396,4663 +12771,5362 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
+msgid "KB"
+msgstr "柿"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "甜彐钼 桧蝈痿彘"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Drakbackup"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "髓蜮栝耜 \"纛礤蜩麇韁" QWERTY"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "祟赅脲 镳桧蝈"
+
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Restore"
-msgstr "满珩蜞眍忄"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "橡钺 玎 Plug & Play 礤篑镥. 填, 桤徨疱蝈 镳噔桦屙 祛龛蝾"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "绣珏疴眍 觐镨 皴汔"
+msgid "Services and deamons"
+msgstr "玉塍桡 溴祛龛"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "念嵇腠栩咫磬 觐眙桡箴圉"
+msgid "Remote host name missing!"
+msgstr "髓锺忄 桁 磬 桁 磬 躅耱 !"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "暑眙桡箴圉 磬 锑泓铖龛"
+msgid "with /usr"
+msgstr " /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "橡邈脲 磬 暑眙桡箴圉 玎 疱珏疴眍 觐镨."
+msgid "Network"
+msgstr "甜彐"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "袜耱痤殛 磬 祓彐囹"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"棱蝾爨蜩黜 铗牮桠 镳桧蝈痂 疋玎龛 爨龛 疣犷蝈 镱 Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup 暑眙桡箴圉"
+msgid "This password is too simple"
+msgstr "亦玷 镟痤豚 镳尻嚯屙 镳铖蜞"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Total Progress"
-msgstr ""
+msgid "Slovakian (QWERTZ)"
+msgstr "央钼帏赅 (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Sending files..."
-msgstr "如镳帙囔 羿殡钼..."
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "羿殡钼 桤镳囹屙 镱 FTP"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "袜桉蜩磬 扈龛爨腠 桧耱嚯圉 (铖钺屙眍 徨 urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup other files"
-msgstr "绣珏疴眍 觐镨 磬 漯筱 羿殡钼"
+msgid ""
+" Transfer \n"
+"Now"
+msgstr ""
+" 橡艴恸痣 \n"
+"彦汔"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup user files"
-msgstr "绣珏疴眍 觐镨 磬 镱蝠遽栩咫耜 羿殡钼"
+msgid "Use daemon"
+msgstr "如镱腌忄 溴祛"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Backup system files"
-msgstr "绣珏疴眍 觐镨 磬 耔耱屐龛 羿殡钼"
+msgid "Authentication"
+msgstr "蠕屙蜩翳赅鲨"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr ""
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "念徉 蝾玷 镳桧蝈 磬 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP 磬 CUPS 聱疴"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
+"如徨疱蝈 邃桧 铗 噔蝾爨蜩黜 铗牮栩栩 镳桧蝈痂 耧桉 泐疱 桦 恸忮溴蝈 "
+"桁 磬 躅耱 桦 IP 铒鲨铐嚯眍 眍戾 磬 镱痱 (镱漯噻徼疣 9100) 镱脲蝾."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "填, 桤徨疱蝈 溧眄 玎 疱珏疴眍 觐镨..."
+msgid "Where do you want to mount %s?"
+msgstr "竖溴 桉赅蝈 溧 祛眚桊囹 篑蝠铋耱忸 %s ?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "填, 桤徨疱蝈 眍耔蝈 玎 恸珩蜞眍忄礤..."
+msgid "Restore Via Network"
+msgstr "满珩蜞眍忄 镳彗 祓彐"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "填, 桤徨疱蝈 溧眄 玎 恸珩蜞眍忄礤..."
+msgid "Algeria"
+msgstr "离骅"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "央邃龛蝈 镟赍蜩  蝠徕 溧 皴 桧耱嚯桊囹:\n"
+msgid "Initrd-size"
+msgstr "Initrd-泐脲扈磬"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Next"
-msgstr "央邃忄"
-
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "橡邃桫屙"
+msgid "2 MB"
+msgstr "2 塘"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "青镟玮"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "祟 backup-羿殡"
+msgid "Setting Default Printer..."
+msgstr "橡桧蝈 镱 镱漯噻徼疣礤"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "橡钽疱 磬 恸珩蜞眍忄礤"
+msgid "Interface %s (using module %s)"
+msgstr "软蝈痿彘 %s (桤镱腌忄 祛潴 %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "满珩蜞眍忄 铗 赅蜞腩"
+msgid "Name: %s\n"
+msgstr "褥: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
+msgid "Generating preview ..."
+msgstr "缅礤痂疣 镳邈脲..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "孰桢眚耜"
+#: ../../mouse.pm:1
+#, c-format
+msgid "serial"
+msgstr "皴痂轫"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr ""
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "满珩蜞眍忄礤蝾 镳铒噤磬..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "灭箸桧耜 (\"肃蜩眈赅\" 磬疱溽)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "如桉赈 桁 磬 爨磬"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "如桉赈 镱蝠遽栩咫耜 桁"
+msgid "Kenya"
+msgstr "叔龛"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "如桉赈 镟痤豚"
+msgid "Use ``Unmount'' first"
+msgstr "销疴 桤镱腌忄轵 '腻祛眚桊囗'"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Installing mtools packages..."
+msgstr "软耱嚯桊囗 磬 mtools 镟赍蜩..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "褥 磬 躅耱"
+msgid "You must specify a root partition"
+msgstr "茵徕 溧 玎溧溴蝈 觐疱眍忤 "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "first step creation"
+msgstr "嵇疴 耱赅 磬 聱玟噔囗"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "满珩蜞眍忄 镳彗 祓彐"
+msgid "Both Shift keys simultaneously"
+msgstr "拟囹 Shift 觌噔桫 邃眍怵屐屙眍"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "如徨疱蝈 沭圄梓磬 赅痱"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR 皖忸 镱觐脲龛"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "满珩蜞眍忄 铗 脲眚"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup 暑眙桡箴圉"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "青镟玷 赅蝾..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "满珩蜞眍忄 铗 CD"
+msgid "Korea (North)"
+msgstr "暑疱 (彦忮痦)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
+msgid "Autologin"
+msgstr "棱蝾爨蜩黜 怆桤"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"橡铎磬\n"
-"嵇 磬 恸珩蜞眍忄礤"
+msgid "System configuration"
+msgstr "暑眙桡箴圉 磬 耔耱屐"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "相痤豚 玎 噤扈龛耱疣蝾 磬 漕戾轫"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"满珩蜞眍忄 桤狃囗栩錦n"
-"羿殡钼"
+"Mandrake Linux 9.1 忤 镳邃铖蜞 11 镱蝠遽栩咫耜 桧蝈痿彘襦 觐栩 祛汔 溧 "
+"狷溧 磬嵇腠 祛滂翳鲨疣龛: KDE 3, Gnome 2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "袜耱痤殛 磬 镳桧蝈疣 \"%s\" ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "塘"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "桤犷 磬 嵇 玎 恸珩蜞眍忄礤 (忪羼蝾 /)"
+msgid "Virgin Islands (British)"
+msgstr "妈痄骅眈觇 务蝠钼 (琉栩囗耜)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "满珩蜞眍忤 漯筱"
+msgid "Bermuda"
+msgstr "铃痨箐"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "满珩蜞眍忤 项蝠遽栩咫"
+msgid "click here if you are sure."
+msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "谚耱屐 玎 恸珩蜞眍忄礤"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"项-泐疱 襦 桤狃铄龛 玎皴麇龛蝈 Linux 腩忮 聱耱怏忄\n"
+"磬 蜮滂 忤 滂耜. 填驽蝈 溧 玎镟玷蝈 桤犷疣 磬镳噔屙 铗 爨泓铖龛赅, 蝈 襦\n"
+"漕狃 玎 钺 箫铗疱徉. 狸 汨 镳铎屙栩, 蝠徕 溧 镱礤 溧 铒疱溴腓蝈\n"
+"root (\"/\"). 湾 桤徼疣轵 镳尻嚯屙 爨腙 腩忮, 玎蝾 爨 溧 "
+"祛驽蝈\n"
+"溧 桧耱嚯桊囹 漕耱囹眍 耦趄箦. 狸 桉赅蝈 溧 聱躔囗忄蝈 溧眄栩 耔 磬\n"
+"铗溴脲 , 蝠徕 溧 桤徨疱蝈 \"/home\" (恸珈铈眍 襦祛, 嚓 桁囹 "
+"镱忮麇\n"
+"铗 邃桧 Linux ).\n"
+"\n"
+"\n"
+"青 桧纛痨圉, 怦尻 镱赅玎, 赅牝 耠邃忄: \"褥錦", \"枢镟鲨蝈騖".\n"
+"\n"
+"\n"
+"\"褥弪頫" 皴 觐滂疣 赅牝 耠邃忄: \"蜩 磬 滂耜郳", \"眍戾 磬 滂耜郳",\n"
+"\"眍戾 磬 隲" (磬镳桁屦, \"hda1\").\n"
+"\n"
+"\n"
+"\"诣嵇 磬 滂耜郳" 祛驽 溧 \"hd\", 嚓 IDE 蜮 滂耜, 桦 \"sd\", 嚓 "
+"錦n"
+"SCSI 蜮 滂耜.\n"
+"\n"
+"\n"
+"\"皖戾瘊 磬 滂耜郳" 忤磬汨 狍赈囹 耠邃 \"hd\" 桦 \"sd\". 橡 IDE "
+"滂耜钼:\n"
+"\n"
+" * \"a\" 铉磬鬣忄 \"master 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
+" * \"b\" 铉磬鬣忄 \"slave 滂耜 磬 嵇疴 IDE 觐眚痤脲餦",\n"
+" * \"c\" 铉磬鬣忄 \"master 滂耜 磬 怛铕 IDE 觐眚痤脲餦",\n"
+" * \"d\" 铉磬鬣忄 \"slave 滂耜 磬 怛铕 IDE 觐眚痤脲餦".\n"
+"\n"
+"\n"
+"橡 SCSI 篑蝠铋耱忄, \"a\" 铉磬鬣忄 \"嵇疴 蜮 滂耜\", \"b\" 铉磬鬣忄 "
+"\"怛铕 蜮 滂耜\" ..."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "酿筱 眍耔蝈"
+msgid "Remove"
+msgstr "橡屐圊忄"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "如徨疱蝈 漯筱 眍耔蝈 玎 恸珩蜞眍忄礤 铗 礤泐"
+msgid "Lesotho"
+msgstr "隋耦蝾"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr ""
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "满珩蜞眍忄 铗 蜮 滂耜."
+msgid "Pipe job into a command"
+msgstr "橡尻囵嚅 玎溧龛弪 镳彗 觐爨礓"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "如镱腌忄 赈铗 玎 羿殡钼 磬 疱珏疴眍 觐镨."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "眍忸 滂磬扈黜 篑蝠铋耱忸 沐礤痂疣眍 铗 漯铗 devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"填, 恸忮溴蝈 爨犟桁嚯龛 疣珈屦\n"
-" 镱玮铍屙 玎 Drakbackup"
+msgid "Yes"
+msgstr "泥"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "填, 恸忮溴蝈 滂疱牝铕蜞 玎 玎镟玮囗:"
+msgid "Cote d'Ivoire"
+msgstr "暑 '桠钹"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "如镱腌忄 蜮 滂耜 玎 疱珏疴眍 觐镨"
+msgid "Which protocol do you want to use?"
+msgstr "枢犏 镳铗铌铍 驽豚弪 溧 镳铎屙栩 ?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "祛, 桤徨疱蝈 溧蜞蜞 玎 恸珩蜞眍忄礤"
+msgid "Restore Progress"
+msgstr "橡钽疱 磬 恸珩蜞眍忄礤"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "绣珏疴眍 觐镨 磬 羿殡钼 镳邃:"
+msgid "Estonia"
+msgstr "篷蝾龛"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK 玎 恸珩蜞眍忄礤 磬 漯筱 羿殡钼."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"褥囹 镳噻龛磬 蜞犭桷囹 腩忮蝈, 眍 礤 祛汔 溧 桤镱腌忄.\n"
+"配桧耱忮龛 磬麒 溧 镳屐羼蜩蝈 汶噔龛蝈 耔 腩忮, 玎 溧 桁囹 镳噻眍 "
+"耱 耠邃 extended-腩忮蝈"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " 暑眙桡箴圉 玎 恸珩蜞眍忄礤 "
+msgid "Channel"
+msgstr "枢磬"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Add"
+msgstr "念徉"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "爨 磬耱痤殁囗 耧钿咫礤 磬 软蝈痦弪 怵赅蜞."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid " Error while sending mail. \n"
+msgstr " 灭屮赅 镱 怵屐 磬 桤镳帙囗 磬 镱. \n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "填, 桤徨疱蝈 皴痂屙 镱痱 犏 觐轵 疋玎 祛溴禚 忤."
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "孰噔栲蝮疣"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "如徨疱蝈 怵赅蜞, 觐轵 桉赅蝈 溧 桤镱腌忄蝈"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Please wait, setting security level..."
+msgstr "填, 桤徨疱蝈 龛忸 磬 耔泱痦铖..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 礤镳尻磬蝾 疣琊噌铗忄 皴 镫囹纛痨"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "袜耱痤殛 磬 祓彐钼铗 篑蝠铋耱忸 %s"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "嚓蜩忤疣 皴汔"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"填, 桤徨疱蝈 觐 祓彐钼 噤囡蝈 溧 桤镱腌忄 玎 怵赅 犏 dhcp 聱疴."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "寅瘃 镟赍蜩 玎 钺眍忄礤"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "耱 磬 祛眚桊囗: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "With X"
+msgstr " X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "Multi-head configuration"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "No browser available! Please install one"
+msgstr "爨 磬腓黜 镳钽疣爨 玎 镳邈脲! 填 桤徨疱蝈 邃磬"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"泥 玎镟 腓 镳铎屙栩 ?\n"
+"义牦蜞 磬耱痤殛 :\n"
"\n"
-"- 物鲨:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "湾 祛驽蝈 溧 桧耱嚯桊囗 ReiserFS 磬 镱-爨膪 铗 32 塘"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"rwho 镳铗铌铍 镱玮铍忄 磬 铗溧脲麇龛 镱蝠遽栩咫 溧 皴 皲钺 聱 耧桉\n"
+"磬 怦梓觇 镱蝠遽栩咫 怆彗腓 磬 爨磬 疣犷蝈 rwho 溴祛 (镱漕徨 磬 "
+"finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "褥 磬 漕戾轫"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Sharing of local printers"
+msgstr "项溴礤 磬 腩赅腠 镳桧蝈痂"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " 磬 篑蝠铋耱忸: %s"
+msgid "Available printers"
+msgstr "袜腓黜 镳桧蝈痂"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr ""
+msgid "Empty"
+msgstr "橡噻屙"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "text width"
+msgstr "痂磬 磬 蝈犟"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "竖溴 桉赅蝈 溧 祛眚桊囹 篑蝠铋耱忸 %s ?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "软蝈痿彘 \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr " 徉珙忄 漕牦戾眚圉 (镳屣铕忄 皴!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 狍蝾"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- 谚耱屐龛 羿殡钼:\n"
+"褥 %d 礤桤忮耱龛 镳桧蝈痂 怅膻麇龛 犏 忄蜞 耔耱屙爨"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "义耱"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"如蝾黜桕 玎 疱珏疴眍 觐镨: \n"
+"项玮铍忄/青狃囗忄 滂疱牝眍 怆桤囗 磬 root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "如徼疣 镱蝠遽栩咫 瘊黜"
+msgid "Korea"
+msgstr "暑疱"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "绣珏疴眍 觐镨 磬 镱蝠遽栩咫"
+msgid "Your choice? (default `%s'%s) "
+msgstr "锣 桤犷 ? (镱 镱漯噻徼疣礤 `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "谚耱屐 玎 聱躔囗屙桢"
+msgid "Raw printer"
+msgstr "Raw 镳桧蝈"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "填 桤徨疱蝈 赅赈 桉赅蝈 溧 玎镟玷蝈"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "桁弪 磬 镳铊玮钿栩咫 磬 篑蝠铋耱忸蝾"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Vendor"
+msgstr "橡铊玮钿栩咫"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Interface %s"
+msgstr "软蝈痿彘 %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr ""
+msgid "Configure mouse"
+msgstr "袜耱痤殛 磬 扈"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "如徨疱蝈 戾耱 玎 祛眚桊囗"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "填, 桤徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹."
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "念嵇腠栩咫龛 铒鲨"
+msgid "Yugoslavian (latin)"
+msgstr "捭铖豚怦赅 (豚蜩龛鲟)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "暑汔"
+msgid "Installing"
+msgstr "软耱嚯桊囔"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "竖溴"
+msgid "Launch userdrake"
+msgstr "羊囵蜩疣 userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "枢赈"
+msgid "Is this an install or an upgrade?"
+msgstr "翌忄 眍忄 桧耱嚯圉 腓 桦 钺眍忄礤 ?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
+msgid "ISDN card"
+msgstr "ISDN 赅痱"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
+"项玟疣怆屙, 祓彐钼囹 软蝈痦弪 磬耱痤殛囹 玎恸瘌屙.\n"
+"\n"
+"袜耱痤殛栩  狷溧 镳桦铈屙 犏 耔耱屐囹 忤.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
+msgid "\t-Hard drive.\n"
msgstr ""
-"填, 桤徨疱蝈\n"
-"眍耔蝈 玎 疱珏疴眍 觐镨."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "填, 桤徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "如镱腌忄 溴祛"
+msgid "Printer on remote CUPS server"
+msgstr "橡桧蝈 磬 铗溧脲麇 CUPS 聱疴"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
+"湾耧屮眍 镳屐圊忄礤 磬 镳桧蝈 \"%s\" 铗 Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr ""
+msgid "delete"
+msgstr "桤蝠桠"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "褥 磬 躅耱:"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "hourly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "意 滂耜 / NFS"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "填, 桤徨疱蝈 犏 觐 皴痂屙 镱痱 疋玎磬 扈囹 忤."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Did it work properly?"
+msgstr "橡铕噌铗 腓 赅牝 蝠徕 ?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "填 忮忮溴蝈 滂疱牝铕蜞 玎 玎镟玮囗:"
+msgid "Poor"
+msgstr "祟"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
+msgid "The DHCP start range"
msgstr ""
-"填, 镳钼屦弪 溧腓 桉牝 溧 桤忄滂蝈 脲眚囹 耠邃 赅蝾 镳噔栩 疱珏疴眍 "
-"觐镨."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"填, 镳钼屦弪 溧腓 桉牝 溧 桤蝠桢蝈 脲眚囹 镳邃 溧 镳噔栩 疱珏疴眍 "
-"觐镨."
+msgid "Grenada"
+msgstr "灭屙噤"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "填, 镳钼屦弪 溧腓 桉牝 溧 桤镱脞囹 礤镳屙噔桠帏 皴 篑蝠铋耱忸."
+msgid "Unsafe"
+msgstr "物囫屙"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s 皴牝铕"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use tape to backup"
-msgstr "如镱腌忄 脲眚 玎 疱珏疴眍 觐镨"
+msgid "No"
+msgstr "湾"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No CD device defined!"
-msgstr "湾 滂翳龛疣眍 CD 篑蝠铋耱忸!"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
+"泥腓 忄 镳桧蝈 祉钽铘箜牿桀磬腠 篑蝠铋耱忸 铗 HP 桦 Sony "
+"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 聱 耜屙屦, Sony IJP-"
+"V100), HP PhotoSmart 桦 HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "Guadeloupe"
+msgstr "免噤咫箫"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "填, 镳钼屦弪 溧腓 桤镱腌忄蝈 DVDRAM 篑蝠铋耱忸"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "锐赅蝈 腓 BackSpace 溧 镱溧忄 Delete 磬 觐礴铍囹 ?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "填, 镳钼屦弪 溧腓 桤镱腌忄蝈 DVDR 篑蝠铋耱忸"
+msgid "Vertical refresh rate"
+msgstr "洛痱桕嚯磬 耜铕铖 磬 恸珩蜞眍忄礤"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " 如蝠桠 皴汔 "
+msgid "Entering step `%s'\n"
+msgstr "袜怆桤囔 弪囡 `%s'\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "填, 鳅觏弪 磬 眍耔蝈"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "填, 镳钼屦弪 溧腓 桤镱腌忄蝈 CDRW 戾滂"
+msgid "Removing %s ..."
+msgstr "如蝠桠囗 磬 %s ..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "填, 鳅觏弪 磬 眍耔蝈"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "丸沐"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "填, 桤徨疱蝈 疣珈屦 磬 忄蝾 CD/DVD (Mb)"
+msgid "No printer"
+msgstr "爨 镳桧蝈"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "alert configuration"
+msgstr "觐眙桡箴圉 磬 蝠邂钽"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "物鲨 玎 NetWare 镳桧蝈"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Need hostname, username and password!"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remember this password"
-msgstr "青镱祉 蜞玷 镟痤豚"
+msgid "General"
+msgstr "务眍忭"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "填, 恸忮溴蝈 忄蜞 镟痤豚"
+msgid "Printing system: "
+msgstr "襄鬣蝽 耔耱屐: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "填, 恸忮溴蝈 忄 腩汨"
+msgid "Add a user"
+msgstr "念徉礤 磬 镱蝠遽栩咫"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
+msgid "Network configuration (%d adapters)"
+msgstr "袜耱痤殛 磬 祓彐囹 (%d 噤囡蝈疣)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "填, 恸忮溴蝈 桁 磬 躅耱 桦 IP."
+msgid "Mandatory package %s is missing"
+msgstr "青潸腈栩咫龛 镟赍 %s 腓锺忄"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Philippines"
+msgstr "澡腓镨龛"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Ok"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "褥 磬 镥鬣蝽囹 铒帏赅蜞"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "锐赅蝈 腓 溧 桤镱腌忄蝈 aboot ?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "铃豚痼耜"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" 橡艴恸痣 \n"
-"彦汔"
+"PDQ 镱滗驵 襦祛 腩赅腠 镳桧蝈痂, 铗溧脲麇龛 LPD 镳桧蝈痂 Socket/TCP "
+"镳桧蝈痂.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "橡屐羼蜩 羿殡钼弪 磬 眍 "
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Restore From Catalog"
+msgstr "满珩蜞眍忄 铗 赅蜞腩"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr ""
+msgid "Pitcairn"
+msgstr "翔蜿妃痦"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "祟 backup-羿殡"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "项蝠遽栩咫"
+msgid "group :"
+msgstr "沭箫 :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "祛眚桊囗弪 磬 %s 滂疱牝铕 %s 镳铒噤磬"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "Lilo screen"
+msgstr "Lilo 尻疣"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "如蝠桠囗 磬 铊玑疣龛蝈"
+msgid "LILO with graphical menu"
+msgstr "LILO 沭圄梓眍 戾睨"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Estimating"
+msgstr "橡羼蜞礤"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "填, 桤徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹."
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
+msgstr "湾 祛驽蝈 溧 铖蜞忤蝈 蝾玷 镟赍 礤爨痍桊囗. 翌 忮麇 桧耱嚯桊囗"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", 镳桧蝈 \"%s\" 磬 SMB/Windows 聱疴 \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "湾 怅膻麾 牮栩梓龛 羿殡钼 (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "泥 镳钿驵 腓 怦 镟 ?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "寅瘃 磬腓黜 镟赍蜩 镳屣铖蝠忄 rpm 徉玎蜞 溧眄..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Does not appear to be recordable media!"
msgstr ""
-"如镱腌忄 桧牮屐屙蜞腠 聱玟噔囗 磬 疱珏疴眍 觐镨 ( 礤 玎戾磬 耱囵栩)"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "绣珏疴眍 觐镨 磬 忄蝈 耔耱屐龛 羿殡钼 (/etc 滂疱牝铕)"
+msgid "Specify options"
+msgstr "青溧 铒鲨"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Vanuatu"
+msgstr "锣眢囹"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "茵徕 溧 狷溧 玎溧溴龛 桁弪 IP 噤疱襦 磬 聱疴 !"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"孰桢眚耜 bootdisk 礤钺躅滂 玎 耱囵蜩疣礤 Linux 耔耱屐囹 忤 "
+"礤玎忤耔祛\n"
+"铗 钺桕眍忮龛 bootloader. 翌忄 镱脲珥, 嚓 礤 桉赅蝈 溧 桧耱嚯桊囹錦n"
+"SILO 磬 耔耱屐囹 耔, 嚓 觐 漯筱 铒屦圉桀眄 耔耱屐 爨蹴 SILO\n"
+"桦 嚓 SILO 礤 疣犷蜩 踵痄箦痦囹 忤 磬耱痤殛. 孰桢眚耜 bootdisk\n"
+"祛驽 溧 狷溴 桤镱腌忄 聱馶n"
+"耧囫栩咫龛 钺疣 磬 Mandrake, 箅羼忄觇 恸珩蜞眍忄礤蝾 镳 疱潢鑌n"
+"耠篦噼 磬 耩桠.\n"
+"\n"
+"狸 桉赅蝈 溧 聱玟噤弪 bootdisk 玎 忄蜞 耔耱屐, 镱耱噔弪 滂耜弪 鈂n"
+"嵇疴铗 篑蝠铋耱忸 磬蜩耥弪 \"Ok\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
+"妈 礤 祛驽 溧 桤镱腌忄蝈 牮栾蜩疣磬 羿殡钼 耔耱屐 玎 蝾麝 磬 祛眚桊囗 %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "如犷 磬 羿殡"
+msgid "Norfolk Island"
+msgstr "皖痿铍 务蝠钼"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "软耱嚯圉蜞 磬 蝈爨 礤篑镥!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " 灭屮赅 镱 怵屐 磬 桤镳帙囗 磬 镱. \n"
+msgid "Nothing to do"
+msgstr "爨 龛 玎 镳噔屙"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "如镱腌忄 玎 loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "桤镱腌忄 PPPOE"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Moving files to the new partition"
+msgstr "橡屐羼蜩 羿殡钼弪 磬 眍 "
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s 攀严判忍磐依送O 踵痄箦痦 3D 篑觐疱龛"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "爨 镳铎屙 玎 疱珏疴眍 觐镨!"
+msgid "Advanced"
+msgstr "袜镳邃龛鬣"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "祟 backup-羿殡"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "橡艴恸痣"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "绣珏疴眍 觐镨 磬 漯筱 羿殡钼..."
+msgid "Dvorak (Swedish)"
+msgstr "拟铕嚓 (剽邃耜)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "橡钽疱 玎 疱珏疴眍 觐镨 磬 蜮 滂耜..."
+msgid "More Options"
+msgstr "念嵇腠栩咫龛 铒鲨"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup User files..."
-msgstr "绣珏疴眍 觐镨 磬 镱蝠遽栩咫耜 羿殡钼..."
+msgid "Afghanistan"
+msgstr "吏汔龛耱囗"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup system files..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron 耱囗溧痱磬 UNIX 镳钽疣爨, 觐蝾 镥痂钿梓眍 矬耜 铒疱溴脲龛 镳钽疣扈\n"
+"镱 疣顼桉囗桢. vixie cron 漕徉 祉铈羼蜮 镳彖祗耱忄 磬 蝈玷 磬 镳铖蜩\n"
+"UNIX cron, 怅膻麒蝈腠 镱-漕狃 耔泱痦铖 祛 磬耱痤殁帙 铒鲨."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "Burundi"
+msgstr "馏痼礓"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Add Client -->"
+msgstr "念徉 觌桢眚 -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "橡铟弪弪 忭桁囹咫眍 !"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr ""
+msgid "Port"
+msgstr "项痱"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Total progess"
-msgstr "吾 镳钽疱"
+msgid "No kernel selected!"
+msgstr "爨 桤狃囗 漯!"
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "袜蜩耥弪 'enter' 玎 溧 耱囵蜩疣蝈 桤狃囗囹 窝, 'e' 溧 疱溧牝桊囹"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
-msgstr ""
+msgid "Set-GID"
+msgstr "青溧忄-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "湾 祛汔 溧 磬戾 %s 磬 %s"
+msgid "The encryption keys do not match"
+msgstr "孰钼弪 玎 牮栾蜩疣礤 礤 聱怙噤囹"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "腻皴 \"Windows\" 觌噔桫"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bad password on %s"
-msgstr "祟 镟痤豚 磬 %s"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "ERROR: Cannot spawn %s."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
+"橡邃 溧 镳钿骅蝈, 蝠徕 忭桁囹咫眍 溧 镳铟弪弪 篑腩忤蜞 磬 腓鲥礴. "
+"翌閈n"
+"镱牮桠 豚蜞 Mandrake Linux 滂耱痂狍鲨, , 嚓 礤 耱 聱汶囫龛 怦梓觇 "
+"篑腩忤\n"
+" 礤泐, 鳅觏弪 磬 狍蝾磬 悟赅. 翌忄 礤玎徉忭  镳桕膻麒 桧耱嚯圉蜞. 青 "
+"溧\n"
+"镳钿骅蝈 桧耱嚯圉蜞, 鳅觏弪 磬 狍蝾磬 橡桢扈."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
msgstr ""
+"翌忄 耧桉 铗 磬腓黜 玎 镥鬣 铒鲨 铗磬 皴 玎 蝈牦 镳桧蝈:\n"
+"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "朽玟咫栩咫磬 耧铖钺眍耱"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"drakfirewall configurator\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"袜耱痤轺桕 玎 爨腙 玎蝽 耱屙郳n"
+"\n"
+"翌忄 磬耱痤殁 镥瘃铐嚯磬 玎蝽 耱屙 玎 蜞玷 Mandrake Linux 爨磬.\n"
+"青 祛 镱耱忮蝈眍 磬 玎蜞蜞 疱龛, 祛脲, 镱汶邃礤蝈 耧弼栲腓玷疣磬蜞\n"
+"MandrakeSecurity Firewall 滂耱痂狍鲨."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
+"填, 恸忮溴蝈 忄蝾 桁, 镟痤豚 桁 磬 漕戾轫 玎 漕耱 漕 蝾玷 躅耱."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "如蝠桠囗 磬 铒帏赅蜞"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Network configuration"
+msgstr "袜耱痤殛 磬 祓彐囹"
+
+#: ../../any.pm:1
+#, c-format
+msgid "No sharing"
+msgstr "湾 镱溴"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
+msgstr "橡屐羼蜮 桤狃囗铗 镳噔桦 邃眍 龛忸 磬漕塍"
+
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "伊"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "填, 镳钼屦弪 溧腓 桤镱腌忄蝈 DVDR 篑蝠铋耱忸"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "FATAL"
+msgstr "岳依送"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "如蝠栝"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Report \n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup 朽镱痱 \n"
-"\n"
+"项玮铍忄/青狃囗忄 镳羼蜞痱桊囗 铗 镱蝠遽栩咫 磬 觐礴铍."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "INFO"
-msgstr "韧晕"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"K铎稔蝥疣 忤 祛驽 噔蝾爨蜩黜, 溧 怆彗 X 镳 耱囵蜩疣礤.\n"
+"锐赅蝈 腓 X 溧 皴 耱囵蜩疣, 觐汔蝾 疱耱囵蜩疣蝈 耔耱屐囹?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "FATAL"
-msgstr "岳依送"
+msgid "Build the disk"
+msgstr "漾玟嚅 滂耜"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "WARNING"
-msgstr ""
+msgid "Disconnect %s"
+msgstr "朽珀圜忄 %s"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Status:"
+msgstr "漾耱龛:"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "SSH Server"
+msgstr "SSH 漾疴"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cron not available yet as non-root"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "软耱嚯圉蜞 磬 %s 镳钼嚯屙. 项忤 皴 耠邃磬蜞 沭屮赅:"
+msgid "European protocol"
+msgstr "赔痤镥轳觇 镳铗铌铍"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "湾, 礤 桉赅 autologin"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", 镳桧蝈 \"%s\" 磬 聱疴 \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "泥, 桉赅 autologin 蝾忄 (镱蝠遽栩咫, 溴耜蝾)"
+msgid "Error"
+msgstr "灭屮赅"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "象耥 X-Window 耔耱屐囹 镳 耱囵蜩疣礤"
+msgid "allow \"su\""
+msgstr "镱玮铍忄 \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "System mode"
-msgstr "谚耱屐屙 疱骅"
+msgid "Australia"
+msgstr "棱耱疣腓"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bootsplash"
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo 尻疣"
+msgid "Configure only card \"%s\"%s"
+msgstr "袜耱痤殛 襦祛 磬 赅痱 \"%s\"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Level"
+msgstr "丸忸"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Themes"
-msgstr "义扈"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "青镟玷 桤犷 磬 镟赍蜩"
+msgid "Change the printing system"
+msgstr "橡铎磬 耔耱屐囹 玎 镥鬣"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-" 祛戾眚 桤镱腌忄蝈 %s 赅蝾 镳钽疣爨 玎 耱囵蜩疣礤.\n"
-"助觏弪 磬 袜耱痤殛, 玎 溧 耱囵蜩疣蝈 篑蜞眍忄 爨泓铖龛."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo Bootsplash 蝈扈 襦 篑镥 桧耱嚯桊囗"
-
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "软耱嚯圉蜞 磬 蝈爨 礤篑镥!"
+msgid "Configure services"
+msgstr "袜耱痤殛 磬 篑塍汨蝈"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "铃脲骊"
+msgid "Broadcast Address:"
+msgstr "Broadcast 噤疱:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "橡羼蜞痱桊 'lilo'"
+msgid "mount failed: "
+msgstr "祛眚桊囗弪 礤 篑: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "橡噔 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "吾疣"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "湾 祛汔 溧 耱囵蜩疣 mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"湾篑镥 镳 漕徉礤 磬 镳桧蝈 \"%s\" 磬 Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "悟溧脲麇磬 噤扈龛耱疣鲨"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"湾 祛汔 溧 镨 /etc/sysconfig/bootsplash\n"
-"脏殡 礤 磬戾疱."
+"PCMCIA 镱漯赅蜞 爨 镱忮麇 溧 聱疋蝮忄 玎 漯 2.2. 填, 桤镱腌忄轵 "
+"2.4"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "翔 %s"
+msgid "Selected All"
+msgstr "如徼疣 怦梓觐"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "湾 祛汔 溧 镨 /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - 吾 Unix 橡桧蝈痦 谚耱屐"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Lilo 聱钺龛 礤 磬戾疱眍"
+msgid "Webmin Service"
+msgstr "Webmin 吾耠箧忄礤"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "暑镨疣 %s %s"
+msgid "device"
+msgstr "篑蝠铋耱忸"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "绣珏疴眍 觐镨 %s %s.old"
+msgid "All"
+msgstr "埋梓觇"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "漾玟噔 眍忄 蝈爨"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "暑 镳桧蝈痦 耔耱屐 (spooler) 桤赅蝈 溧 桤镱腌忄蝈 ?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"项赅玮 蝈爨\n"
-"磬 觐礴铍"
+msgid "Greece"
+msgstr "铭瘀"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "软耱嚯桊囗 磬 蝈扈"
+msgid "An error occurred"
+msgstr "项忤 皴 沭屮赅"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "绣骅 磬 Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"翌玷 镟赍 蝠徕 溧 狷溴 钺眍忮韁n"
+"谚泱痦 腓 耱, 麇 桉赅蝈 溧 泐 桤觌栩 ?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "绣骅 磬 Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "亦扈腭赅 (镨 爨磬)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "瘊黜"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/脏殡/_如腓玎"
+msgid "Printer manufacturer, model, driver"
+msgstr "橡铊玮钿栩咫 磬 镳桧蝈疣, 祛溴, 漯嚅忮"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_脏殡"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"爨 眍耔蝈 篑蝾轳蜮铗 桦 玎蝈磬 铗 镨襦礤 %s.\n"
+"填 镱耱噔弪 邃桧."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "袜耱痤殛 磬 磬麒磬 磬 耱囵蜩疣礤"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"蔫疱牝铕蜞 %s 忮麇 聱潸疰 赅赈 溧眄鑌n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "爨 磬腓黜 镳钽疣爨 玎 镳邈脲! 填 桤徨疱蝈 邃磬"
+msgid "Printer on NetWare server"
+msgstr "橡桧蝈 磬 NetWare 聱疴"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "泥忄 疣珈屦 RAM-镟戾 Mb"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "相赍蜞 礤 桧耱嚯桊囗"
+msgid "Real name"
+msgstr "锐蜩眈觐 桁"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "湾 桧耱嚯桊囗"
+msgid "done"
+msgstr "泐蝾忸"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "暑礴铍龛 桧耱痼戾眚"
+msgid "Please uncheck or remove it on next time."
+msgstr "填, 桤徨疱蝈 皴痂屙 镱痱 犏 觐轵 疋玎 祛溴禚 忤."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "朽镱痱"
+msgid "Higher"
+msgstr "项-忤耦觐"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "如徨疱蝈 腩忮蝈, 觐栩 桉赅蝈 溧 纛痨囹桊囹"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Release: "
-msgstr "填 桤鬣赅轵"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Package: "
-msgstr "相赍: "
+msgid "Can't find %s on %s"
+msgstr "湾 祛汔 溧 磬戾 %s 磬 %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Application:"
-msgstr "橡桦铈屙桢:"
+msgid "Japanese 106 keys"
+msgstr "唢铐耜 106 觌噔桫"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "暑眙桡箴圉桀眄 锑泓铖龛鲨"
+msgid "This will take a few minutes."
+msgstr "翌忄  铗礤戾 觐腙 扈眢蜩."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Burkina Faso"
+msgstr "馏痍桧 脏耦"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Windows Migration tool"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Urpmi"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "如蝠桠 桤狃囗铗 镳噔桦"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Software Manager"
-msgstr "杨趄箦疱 戾龛滏"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "橡桧蝈 磬 铗溧脲麇 CUPS 聱疴"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "悟溧脲麇 觐眚痤"
+msgid "Insert a floppy in %s"
+msgstr "央铈弪 滂耜弪 篑蝠铋耱忸 %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Msec"
-msgstr "恬尻"
+msgid "Maldives"
+msgstr "锑脘桠"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "compact"
+msgstr "觐祜嚓蝈"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "1 minute"
+msgstr "1 扈眢蜞"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "on channel %d id %d\n"
+msgstr "磬 赅磬 %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr ""
+msgid ", multi-function device"
+msgstr ", 祉钽铘箜牿桀磬腠 篑蝠铋耱忸"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "念狃 漕 嵇疴铐圜嚯龛 镱祛桕"
+#: ../../lang.pm:1
+#, c-format
+msgid "Laos"
+msgstr "肃铖"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "暑眚痤脲 鲥眚 磬 Mandrake"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "爨 FAT 腩忮 玎 耢磬 磬 泐脲扈磬蜞 (桦 爨 漕耱帔黜 耱)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Parameters"
-msgstr "相疣戾蝠"
+msgid "Firewall"
+msgstr "青蝽 耱屙"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "袜耱痤殛 磬 软蝈痦弪 怵赅"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP 觌桢眚"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA 觐眚痤脲痂"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet 赅痱"
+msgid "Printer Server"
+msgstr "漾疴 磬 镳桧蝈疣"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid "Disconnection from the Internet complete."
+msgstr "朽珀圜忄礤蝾 铗 软蝈痦弪 玎恸瘌桦"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "诣 磬 怵赅蜞: "
+msgid "Custom configuration"
+msgstr "项蝠遽栩咫耜 磬耱痤殛"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "橡铘桦: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "袜耱痤殛 磬 软蝈痦弪 怵赅"
+msgid "Saint Pierre and Miquelon"
+msgstr "砚弪 翔屦 惕赍腩"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"爨蝈 Internet 怵赅.\n"
-"漾玟嚅蝈 蜞赅忄, 赅蝾 鳅觏弪 磬 '袜耱痤'"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "activate now"
-msgstr "嚓蜩忤疣 皴汔"
+msgid "Portugal"
+msgstr "项痱筱嚯"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "溴嚓蜩忤疣 皴汔"
+msgid "Do you have another one?"
+msgstr "褥囹 腓 漯筱() ?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP 觌桢眚"
+msgid ", printing to %s"
+msgstr ", 镥鬣 磬 %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "填, 镳钺忄轵 扈囹 耔"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "象耥囹 镳 耱囵蜩疣礤"
+msgid "Toggle to normal mode"
+msgstr "橡屐桧 皖痨嚯屙 疱骅"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "羊囵蜩疣 镳铗铌铍"
+msgid "Generic"
+msgstr "吾"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "冷囡蝈 %s: %s"
+msgid "Cylinder %d to %d\n"
+msgstr "悟 鲨腓礓 %d 漕 鲨腓礓 %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "袜耱痤殛 磬 腩赅腠 祓彐"
+msgid "New profile..."
+msgstr "皖 镳铘桦 ..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "袜耱痤殛 磬 LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "袜 觐 滂耜 桉赅蝈 溧 泐 镳屐羼蜩蝈 ?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"爨蝈 磬耱痤屙 桧蝈痿彘.\n"
-"袜耱痤轵 汨 镳邃 蝾忄, 赅蝾 鳅觏弪 磬 '袜耱痤殛'"
+msgid "Display logo on Console"
+msgstr "项赅玮 腩泐 磬 暑礴铍"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connect..."
-msgstr "砚玮囗 ..."
+msgid "Windows Domain"
+msgstr "Windows 漕戾轫"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Disconnect..."
-msgstr "悟恸痃忄礤 ..."
+msgid "Interface %s (on network %s)"
+msgstr "软蝈痿彘 %s (磬 祓彐 %s)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not connected"
-msgstr "湾 疋玎"
+msgid "INFO"
+msgstr "韧晕"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "砚玎"
+msgid "Wallis and Futuna"
+msgstr "宇腓 泽蝮磬 务蝠钼"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "茵徕 溧 聱玟噤弪 嵇疴 /etc/dhcpd.conf!"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"爨 漕嵇腠栩咫磬 桧纛痨圉\n"
+"玎 蜞玷 篑塍汔, 聱驽忄."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "软蝈痿彘:"
+msgid "Build Single NIC -->"
+msgstr "项耱痤忄 邃桧梓屙 NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "埋梓觐 镳噔桦眍 腓 ?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "橡桦铈"
+msgid "Marshall Islands"
+msgstr "锑瘌嚯钼 务蝠钼"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "助觏弪 蝮, 玎 溧 耱囵蜩疣蝈 爨泓铖龛赅 ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "锑泓铖龛..."
+msgid "Root password"
+msgstr "满忮溴蝈 镟痤豚 玎 root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "漾耱龛:"
+msgid "Build All Kernels -->"
+msgstr "项耱痤忄 怦梓觇 漯 -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "诣: "
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "软蝈痦弪 漕耱"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"爨蝈 swap-隲n"
+"\n"
+"泥 镳钿驵 腓 怦 镟 ?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "髓锺忄 桁 磬 NCP 聱疴 !"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "褥 磬 躅耱:"
+msgid "Suriname"
+msgstr "洋痂磬"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "袜耱铋赅 磬 腩赅腠 祓彐 ..."
+msgid "Enable ACPI"
+msgstr "羊囵蜩疣礤 铗 CD "
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "State"
-msgstr "漾耱龛"
+msgid "Graphical Environment"
+msgstr "灭圄梓磬 耩邃"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "酿嚅忮"
+msgid "Gibraltar"
+msgstr "描狃嚯蜞"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Protocol"
-msgstr "橡铗铌铍"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Interface"
-msgstr "软蝈痿彘"
+msgid "Do nothing"
+msgstr "湾 镳噔 龛"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "袜耱痤殛 磬 软蝈痦弪 漕耱 ..."
+msgid "Delete Client"
+msgstr "如蝠桠 觌桢眚"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Wait please"
-msgstr ""
+msgid "Filesystem type: "
+msgstr "妈 羿殡钼 耔耱屐: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"褥 磬 聱玟噔囗 镳铘桦 (眍忤 镳铘桦 皴 聱玟噔 赅蝾 觐镨 磬 蝈牦):"
+msgid "Starting network..."
+msgstr "羊囵蜩疣礤 祓彐囹 ...."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "New profile..."
-msgstr "皖 镳铘桦 ..."
+msgid "Vietnam"
+msgstr "妈弪磬"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Profile to delete:"
-msgstr "橡铘桦 玎 桤蝠桠囗:"
+msgid "/_Fields description"
+msgstr "/_项脲蜞 铒桉囗桢"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Del profile..."
-msgstr "如蝠铋 镳铘桦 ..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "物蜩扈玷疣 忄蜞 耔泱痦铖"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "袜耱痤殛 磬 祓彐囹 (%d 噤囡蝈疣)"
+msgid "Help"
+msgstr "项祛"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Your personal phone number"
+msgstr "髓黜 忤 蝈脲纛礤 眍戾"
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "如犷 磬 戾龛滏 磬 滂耧脲"
+msgid "Which size do you want to keep for Windows on"
+msgstr "暑腙 桉赅蝈 溧 铖蜞忤蝈 玎 windows?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"湾祛驽 溧 皴 玎蜮铕 镳噔桦眍 mkbootdisk: \n"
-" %s \n"
-" %s"
+"义耱钼栩 耱疣龛鲨 襦 桤镳囹屙 犏 镳桧蝈痦.\n"
+"填驽 溧 铗礤戾 爨腙 怵屐 镳邃 镳桧蝈疣 溧 玎镱黜.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "湾 祛汔 溧 磬镳噔 'fork': %s"
+msgid "Username required"
+msgstr "如桉赈 镱蝠遽栩咫耜 桁"
-#: ../../standalone/drakfloppy:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"爨 眍耔蝈 篑蝾轳蜮铗 桦 玎蝈磬 铗 镨襦礤 %s.\n"
-"填 镱耱噔弪 邃桧."
+"吾桕眍忮眍, DrakX 徼 蝠徕嚯 溧 桤徨疱 镳噔桦磬蜞 玎 忄 觌噔栲蝮疣 ( "
+"玎忤耔祛耱\n"
+"铗 彗桕, 觐轵 耱 桤狃嚯) 爨 溧 皴 磬腩骅 溧 忤滂蝈 蜞玷 耱赅. "
+"吾圜 祛驽 溧\n"
+"爨蝈 觌噔栲蝮疣 聱铗忮蝰蜮帙 蝾黜 磬 忄 彗桕: 磬镳桁屦, 嚓 耱 "
+"囗汶钽钼铕 邃,\n"
+"祛驽 徼  桉赅蝈 觌噔栲蝮疣蜞 忤 溧 狷溴 邃耜. 入 嚓 泐忸痂蝈 "
+"a磴腓轳觇, 眍 耱錦n"
+" 殊遽尻, 祛驽 徼  耱 聱蜞 耔蝮圉. 溻囹 耠篦,  蝠徕 溧 "
+"皴 恸痦弪錦n"
+"犏 蜞玷 桧耱嚯圉桀眄 耱赅 溧 桤徨疱蝈 镳噔桦磬蜞 觌噔栲蝮疣 铗 "
+"耧桉.\n"
+"\n"
+"埋梓觐, 觐弪 蝠徕 溧 磬镳噔栩, 溧 镱耦麒蝈 镳邃镱麒蜞磬蜞 觌噔栲蝮痦 "
+"磬疱溽郳n"
+"铗 耧桉, 觐轵  皴 镱忤 镳邃 忄.\n"
+"\n"
+"狸 桁囹 觌噔栲蝮疣 铗 彗桕 疣珉梓屙 铗 蝾玷 桤镱腌忄 镱 镱漯噻徼疣礤, "
+"鳅觏弪錦n"
+"磬 狍蝾磬 \"袜镳邃龛鬣鈂". 馘 忤 狷溴 镳邃铖蜞忮 嵇脲 耧桉 "
+"镱滗驵龛蝈 觌噔栲蝮痂."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "橡钼屦弪 桁囹 腓 滂耜弪 篑蝠铋耱忸蝾 %s"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "袜耱痤殛 磬 SMB (Windows 9x/NT) 镳桧蝈"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "漾玟嚅 滂耜"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"项玮铍忄/青狃囗忄 聱钺龛 玎 IPv4 沭屮觇."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Output"
-msgstr "绣珞腧囹"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd 漕嵇腠栩咫龛 囵泱戾眚"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Remove a module"
-msgstr "橡屐圊龛 祛潴豚"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Add a module"
-msgstr "念徉忤 祛潴豚"
+msgid "Protocol for the rest of the world"
+msgstr "橡铗铌铍 玎 铖蜞磬腓 疋"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "徨 scsi 祛潴腓"
+msgid "Print test pages"
+msgstr "悟镥鬣蜮囗 磬 蝈耱钼 耱疣龛鲨"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if needed"
-msgstr "嚓 眢骓"
+msgid "64 MB or more"
+msgstr "64 塘 桦 镱忮麇"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "徨 raid 祛潴腓"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"填, 桤徨疱蝈 蝈耱钼 耱疣龛鲟 玎 镥鬣.\n"
+"青徨脲骊: 蝈耱钼囹 耱疣龛鲟 玎 耥桁赅 祛驽 溧 铗礤戾 漕耱 潸脬頫n"
+"怵屐 溧 皴 桤镥鬣蜞 磬 豚珏痦 镳桧蝈痂 爨腙 镟戾 祛驽 恸钺\n"
+"溧 礤 桤脲珏. 镱忮麇蝾 耠篦噼 漕耱囹磬 耱囗溧痱磬 蝈耱钼 耱疣龛鲟."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "force"
-msgstr "镳桧箐栩咫眍"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd 漕嵇腠栩咫龛 囵泱戾眚"
+msgid "Not formatted\n"
+msgstr "湾纛痨囹桊囗\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Expert Area"
-msgstr "念嵇腠栩咫龛"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "kernel version"
-msgstr "忮瘃 磬 漯铗"
+msgid "PXE Server Configuration"
+msgstr "暑眙桡箴桊囗 磬 PXE 聱疴"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "default"
-msgstr "镱 镱漯噌桊囗"
+msgid "Backup the system files before:"
+msgstr "绣珏疴眍 觐镨 磬 羿殡钼 镳邃:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "General"
-msgstr "务眍忭"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"翌忄 耱囗溧痱磬蜞 耔泱痦铖 镳屣铕栩咫磬 玎 觐祜, 觐轵  狷溴 "
+"桤镱腌忄 溧 皴 疋玮 犏 软蝈痦弪 赅蝾 觌桢眚."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "聱溧忄礤 磬 耱囵蜩疣 滂耜弪"
+msgid "First floppy drive"
+msgstr "销疴 綦铒 篑蝠铋耱忸"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "/File/_Quit"
+msgstr "/脏殡/_如腓玎"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size"
-msgstr "妙脲扈磬"
+msgid "Dvorak"
+msgstr "拟铕嚓"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Module name"
-msgstr "褥 磬 祛潴"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "如躅 铗 桧耱嚯圉桀眄囹 镳钽疣爨"
+msgid "Choose the new size"
+msgstr "如徨疱蝈 眍忄 泐脲扈磬"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "如蝠桠 梏蝾忮 铗 忄蜞 耔耱屐"
+msgid "Media class"
+msgstr "孰囫 眍耔蝈"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "袜鬣腠 蝈耱钼"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "软耱嚯桊嚅"
+#: ../../lang.pm:1
+#, c-format
+msgid "Faroe Islands"
+msgstr "务蝠钼 脏痤"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "Restart XFS"
+msgstr "绣耱囵蜩疣 XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "暑镨疣 梏蝾忮 磬 忄蜞 耔耱屐"
+msgid "Add host/network"
+msgstr "念徉 躅耱/祓彐"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "如蝠桠 耧桉"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "如徼疣 怦梓觐"
+msgid "Please enter the directory to save to:"
+msgstr "填 忮忮溴蝈 滂疱牝铕蜞 玎 玎镟玮囗:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Model name"
+msgstr "褥 磬 祛溴"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr ""
+msgid "Albania"
+msgstr "离徉龛"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "软耱嚯桊囗 磬 耔耱屐囹"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "理汶栝耜 蝈痂蝾痂 软滂轳觇 铌遴"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
+msgid "Normal Mode"
+msgstr "皖痨嚯屙 疱骅"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "橡桧蝈"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr "诣 磬 怵赅蜞 犏 镳桧蝈疣"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "爨蝈 祓彐钼 噤囡蝈!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "甜彐 %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr ""
+msgid "Malayalam"
+msgstr "锑豚殡囔"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "如徨疱蝈 镳桦铈屙蜞 觐栩  镱滗驵 梏蝾忮蝈:"
+msgid "Option %s out of range!"
+msgstr "物鲨蜞 %s 桤恸 沭囗桷栩 !"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
+msgid "Connect %s"
+msgstr "砚玮 %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "绣耱囵蜩疣 XFS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "悟眍耥"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "襄鬣蜞礤/殃囗桊囗/灶蝾 赅痱梓觇 磬 镳桧蝈 \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Font List"
-msgstr "扬桉 梏蝾忮"
+msgid "Duplicate mount point %s"
+msgstr "捏犭桊嚅 蝾麝囹 磬 祛眚桊囗 %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "念嵇腠栩咫龛 铒鲨"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "软耱嚯桊 梏蝾忮"
+msgid "Connection Configuration"
+msgstr "袜耱痤殛 磬 怵赅蜞"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "络桁 梏蝾忮 磬 Windows"
+msgid "Unknown|Generic"
+msgstr "湾桤忮耱屙|吾"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "褥镱痱桊 磬 梏蝾忮"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "泐蝾忸"
+msgid "Quit"
+msgstr "如躅"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs 疱耱囵蜩疣"
+msgid "Myanmar"
+msgstr "惕囗爨"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Auto allocate"
+msgstr "棱蝾爨蜩黜 聱玟噔囗"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "绣耱囵蜩疣 XFS"
+msgid "Check bad blocks?"
+msgstr "橡钼屦赅 玎 腩 皴牝铕 ?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Other MultiMedia devices"
+msgstr "酿筱 祗腧桁邃栝龛 篑蝠铋耱忄"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "No remote machines"
+msgstr "爨 铗溧脲麇龛 爨龛"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
+"\n"
+"念狃 漕 磬 锑泓铖龛赅 玎 觐眙桡箴桊囗 磬 橡桧蝈餦n"
+"\n"
+"亦  忤 镱祛沩 溧 桧耱嚯桊囹 忄蝈 镳桧蝈痂 疋玎龛 犏 觐祜.\n"
+"\n"
+"狸 桁囹 镳桧蝈() 疋玎龛 犏 蜞玷 爨磬, 怅膻麇蝈 汨, 蜞赅 麇 蝈 溧 "
+"祛汔 溧 皴 觐眙桡箴桊囹 噔蝾爨蜩黜.\n"
+"\n"
+"助觏弪 磬 \"央邃忄\" 觐汔蝾 耱 泐蝾忤, 磬 \"橡尻忄\" 嚓 礤 桉赅蝈 "
+"溧 磬耱痤殁囹 镳桧蝈痂蝈 皴汔."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS 桎屙蜩翳赅鲨"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "物鲨蜞 ``毋疣龛麒 铒鲨栩 铗 觐爨礓龛 疱'' 徨顼铍彗磬 徨 镟痤豚"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "扬钿咫礤蝾 磬 怵赅蜞 犏 软蝈痦弪 忮麇 嚓蜩忤疣眍"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Card IO_0"
+msgstr "IO_0 磬 赅痱囹"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "吾邃桧屙 鲤噌耜 澎桊耱忄"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "软耱嚯桊囗 磬 True Type 梏蝾忮"
+msgid "Card IO_1"
+msgstr "IO_1 磬 赅痱囹"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "暑镨疣 梏蝾忮"
+msgid "Thailand"
+msgstr "亦殡囗"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Routers:"
+msgstr "畜蝈痂:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "枢玎躐蜞"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "软耱嚯圉 磬 Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "爨 磬戾疱龛 梏蝾忮"
+msgid "Thai keyboard"
+msgstr "亦殁囗耜 觌噔栲蝮疣"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Dialup options"
+msgstr "物鲨 玎 桤徼疣礤 镱 蝈脲纛"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Bouvet Island"
+msgstr "务蝠钼 馏忮"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"念狃 漕 桧耱痼戾眚 玎 耧钿咫礤 磬 软蝈痦弪 怵赅蜞 !\n"
-"\n"
-"%s\n"
+"鸯屙弪 CD-ROM !\n"
"\n"
-"助觏弪 ``袜耱痤'', 嚓 桉赅蝈 溧 耱囵蜩疣礤 篑蜞眍忄 爨泓铖龛."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "袜耱痤殛 磬 耧钿咫礤蝾 磬 软蝈痦弪 怵赅蜞"
+"填, 耠铈弪 CD-ROM 铉嚆豚忮 \"%s\" 篑蝠铋耱忸蝾 磬蜩耥弪 Ok, 觐汔蝾 "
+"耱 泐蝾忤.\n"
+"狸 泐 爨蝈, 磬蜩耥弪 悟磬, 玎 溧 桤徨沩弪 桧耱嚯桊囗弪 铗 蝾玷 CD-"
+"ROM."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "爨 磬耱痤殁囗 耧钿咫礤 磬 软蝈痦弪 怵赅蜞."
+msgid "Polish"
+msgstr "项腭赅"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "玉蜞眍怅囹 忮麇 磬镳噔屙 祛戾眚 怅膻麇磬."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "玉蜞眍怅囹 忮麇 磬镳噔屙, 眍 祛戾眚 桤觌屙."
+msgid "\t-Network by webdav.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"埋梓觐 磬耱痤屙.\n"
-"彦汔 祛驽蝈 溧 耧钿咫栩 软蝈痦弪 怵赅蜞 耔 漯筱 觐祜痂 腩赅腠囹 "
-"忤 祓彐 桤镱腌忄殛 噔蝾爨蜩黜 祓彐钼 磬耱痤殛 (DHCP)."
+" 耔耱屐囹 礤 铗牮栩 ethernet 祓彐钼 噤囡蝈. 填, 耱囵蜩疣轵 "
+"桧耱痼戾眚 玎 磬耱痤殛 磬 踵痄箦."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "橡钺脲扈 桧耱嚯桊囗弪 磬 镟赍蜞 %s"
+msgid "Netmask"
+msgstr "甜彐钼 爨耜"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"袜耱痤殁帙 耜痂矧钼, 桧耱嚯桊囗 磬 耦趄箦, 耱囵蜩疣礤 磬 聱疴..."
+msgid "No hard drives found"
+msgstr "湾 磬戾疱 蜮 滂耜"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "袜耱痤殛 ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "满珈铈屙 觐眙桕 噤疱耔蝈 LAN 磬耱痤殛囹 磬 %s!\n"
+msgid "2 buttons"
+msgstr "2 狍蝾磬"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "枢犏 蜩嵇 磬 ISDN 怵赅蜞 ?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Label"
+msgstr "膨桕弪"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Save on floppy"
+msgstr "青镟玷 磬 滂耜弪"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Printer auto-detection"
+msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Which of the following is your ISDN card?"
+msgstr "暑 铗 耠邃龛蝈 ISDN 赅痱囹 忄蜞 ?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS 镱矬疱 镳铗铌铍 玎 钺戾 磬 羿殡钼 镱 TCP/IP 祓彐.\n"
+"亦玷 篑塍汔 铖桡箴忄 趔黻鲨铐嚯眍耱蜞 磬 NFS 聱疴, 觐轵 皴 磬耱痤殁郳n"
+"黟彗 羿殡 /etc/exports."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "皖忸 桁 磬 镳桧蝈"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Msec"
+msgstr "恬尻"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS 聱疴 IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> 玎徨脲骊, 镳铎屙屙 弪桕弪:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(翌玷) DHCP 聱疴 IP"
+msgid "Number of capture buffers:"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "锣 桤犷 ? (镱 镱漯噻徼疣礤 `%s')"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
+"埋梓觇 眍忸溴翳龛疣龛 腩忮 蝠徕 溧 狷溧 纛痨囹桊囗, 玎 溧 皴 "
+"桤镱腌忄騖n"
+"(纛痨囹桊囗 铉磬鬣忄 聱玟噔囗 磬 羿殡钼 耔耱屐).\n"
+"\n"
+" 蝾玷 祛戾眚 祛驽 徼 桉赅蝈 溧 镳弭铕爨蜩疣蝈 觐 聱耱怏忄 腩忮, "
+"玎\n"
+"溧 桤蝠桢蝈 怦赅赈 溧眄, 觐栩 聱潸疰囹. 狸 桉赅蝈 溧 泐 磬镳噔栩, "
+"祛\n"
+"桤徨疱蝈 .\n"
+"\n"
+"填, 铗徨脲驽蝈, 麇 礤 礤钺躅滂祛 溧 镳弭铕爨蜩疣蝈 怦梓觇 腩忮\n"
+"聱耱怏忄 铗镳邃. 茵徕 溧 镳弭铕爨蜩疣蝈 腩忮蝈 聱潸疰帙鑌n"
+"铒屦圉桀眄囹 耔耱屐 (赅蝾 \"/\", \"/usr\" 桦 \"/var\"), 眍 蝾忄 礤 錦n"
+"玎潸腈栩咫眍 玎 腩忮 聱潸疰帙 溧眄, 觐栩 桉赅蝈 溧 玎镟玷蝈 "
+"(钺桕眍忮眍\n"
+"\"/home\").\n"
+"\n"
+"填, 狷溴蝈 忭桁囹咫龛, 觐汔蝾 桤徼疣蝈 腩忮蝈. 央邃 纛痨囹桊囗 怦梓觇\n"
+"溧眄 磬 镱耦麇龛蝈 腩忮  狷溧 桤蝠栩 爨 溧 祛驽蝈 溧 汨\n"
+"恸珩蜞眍忤蝈.\n"
+"\n"
+"助觏弪 \"OK\", 觐汔蝾 耱 泐蝾忤 溧 纛痨囹桊囹 溧腩忮.\n"
+"\n"
+"助觏弪 \"悟赅鏫", 嚓 桉赅蝈 溧 桤徨疱蝈 漯筱 腩忮 玎 桧耱嚯圉 磬 "
+"眍忄蜞\n"
+"耔 Mandrake Linux 铒屦圉桀眄 耔耱屐.\n"
+"\n"
+"助觏弪 \"袜镳邃龛鬣鈂", 嚓 桉赅蝈 溧 桤徨疱蝈 腩忮, 觐栩 溧 狷溧騖n"
+"镳钼屦屙 玎 腩 犭铌钼 铗 滂耜."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "冷疱 磬 祟赅腠 祓彐"
+msgid "French"
+msgstr "责屙耜"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "族 (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "橡钽疱 磬 踵痄箦痦 镳钺"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Xinetd 钺耠箧忄礤"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "吾钺龛"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
+" (相疣脲腠 镱痱钼: /dev/lp0, /dev/lp1, ..., 聱铗忮蝰忄 磬 LPT1:, "
+"LPT2:, ..., 1-忤 USB 镳桧蝈: /dev/usb/lp0, 2-痂 USB 镳桧蝈: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "暑眙桡箴圉 磬 蝈牦 桧蝈痿彘"
+msgid "Next"
+msgstr "央邃忄"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "项赅玮 觐眙桡箴圉 磬 蝈牦 桧蝈痿彘"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "湾 祛驽蝈 溧 桧耱嚯桊囹 bootloader 磬 豚 %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "棱蝾爨蜩黜 疱觐眙桡箴圉"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
+"\n"
+"念狃 漕.\n"
+"\n"
+"相疣戾蝠栩 玎 噔蝾桧耱嚯圉 襦 磬腓黜 皴牿蜞 忸"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "甜彐钼 桧蝈痿彘 忮麇 觐眙桡箴桊囗"
+msgid "Puerto Rico"
+msgstr "象屦蝾 需觐"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"填 桤徨疱蝈 觐 祓彐钼 噤囡蝈 溧 狷溴 怅膻麇 犏 腩赅腠囹 忤 祓彐."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "髓蜮栝耜 \"麒耠钼 疱滂鲟\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-" 耔耱屐囹 忤 桁 襦祛 邃桧 磬耱痤屙 祓彐钼 噤囡蝈:\n"
+"央邃龛蝈 镟赍蜩  狷溧 桤蝠栩 玎 溧 皴 镱玮铍 钺眍忄礤 磬 耔耱屐囹: %"
+"s\n"
"\n"
-"%s\n"
"\n"
-"鸯蜞 溧 篑蜞眍 腩赅腠囹 忤 祓彐 磬 蝾玷 噤囡蝈."
+"腻轳蜮栩咫眍 腓 桉赅蝈 溧 桤蝠桢蝈 蝈玷 镟赍蜩?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "甜彐钼 桧蝈痿彘"
+msgid "Anguilla"
+msgstr "理汨豚"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS 漕戾轫"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-" 耔耱屐囹 礤 铗牮栩 ethernet 祓彐钼 噤囡蝈. 填, 耱囵蜩疣轵 "
-"桧耱痼戾眚 玎 磬耱痤殛 磬 踵痄箦."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "爨蝈 祓彐钼 噤囡蝈!"
+msgid "Antarctica"
+msgstr "理蜞痍蜩赅"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "软蝈痿彘 %s"
+msgid "Mount options"
+msgstr "物鲨 玎 mount:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "软蝈痿彘 %s (桤镱腌忄 祛潴 %s)"
+msgid "Jamaica"
+msgstr "哽嚅赅"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Xinetd 钺耠箧忄礤"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"砚骅 麒耱 漯嚅忮痂 犭铌钼 篑蝠铋耱忄 (赅蝾 腩忮\n"
+"磬 蜮滂 滂耜), 玎 箫铗疱蜞 铗 镳桦铈屙 赅蝾 Oracle"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"袜 嵇 耱 溧 磬耱痤栩 觐祜 耔 蜞赅, 麇 溧 镱溴 软蝈痦弪 怵赅蜞\n"
-"耔. 蜞玷 恸珈铈眍耱, 漯筱 觐祜痂 腩赅腠囹 忤 祓彐  祛汔 溧\n"
-"桤镱腌忄 软蝈痦弪 怵赅蜞 磬 蝾玷 觐祜.\n"
-"\n"
-"俞邃弪 皴, 麇 忤 耱 觐眙桡箴桊嚯 忄蜞 甜彐/软蝈痦弪 漕耱 "
-"桤镱腌忄殛 drakconnect 镳邃 溧 镳噔栩 漯筱.\n"
-"\n"
-"悟徨脲驽蝈: 蝠徕 忤 铗溴脲 玎 蝾忄 祓彐钼 噤囡蝈, 玎 溧 篑蜞眍忤蝈 "
-"恸蝠屮磬蜞 耔 祓彐 (LAN)."
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "扬钿咫礤 磬 怵赅蜞 软蝈痦弪"
-
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "扬钿咫礤蝾 磬 软蝈痦弪 祛戾眚 怅膻麇眍."
+msgid "Please wait, preparing installation..."
+msgstr "填, 桤鬣赅轵, 镱溷铗礤 磬 桧耱嚯圉蜞"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "玛膻麾囗 磬 聱疴 ..."
+msgid "Czech (QWERTZ)"
+msgstr "族 (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
-msgstr "铖蜞忤"
+msgid "Track network card id (useful for laptops)"
+msgstr "橡铖脲忄礤 磬 ID 磬 祓彐钼囹 赅痱 (镱脲珥 镳 豚矧铒)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "镳屙囫蝠铋赅"
+msgid "The port number should be an integer!"
+msgstr "皖戾瘊 磬 镱痱 蝠徕 溧 腩 麒耠 !"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "enable"
-msgstr "怅膻麒"
+msgid "You must choose an image file first!"
+msgstr "妈 蝠徕 溧 桤徨疱蝈 嵇疴 沭圄梓屙 羿殡!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"玉蜞眍怅囹 磬 扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 忮麇 玎恸瘌屙.\n"
-" 祛戾眚 桤觌屙.\n"
-"\n"
-"枢赈 桉赅蝈 溧 磬镳噔栩 ?"
+msgid "Restore from Hard Disk."
+msgstr "满珩蜞眍忄 铗 蜮 滂耜."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 桤觌屙."
+msgid "Add to LVM"
+msgstr "橡栳噔 犏 LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 祛戾眚 桤觌屙."
+msgid "DNS server"
+msgstr "DNS 聱疴"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "如觌忄礤 磬 聱疴 ..."
+msgid "Trinidad and Tobago"
+msgstr "茵桧桎噤 翌徉泐"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "桤觌"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD LPRng 礤 镱滗驵 IPP 镳桧蝈痂.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"玉蜞眍怅囹 磬 扬钿咫礤蝾 磬 软蝈痦弪 怵赅蜞 玎恸瘌屙.\n"
-" 祛戾眚 怅膻麇磬.\n"
-"\n"
-"枢赈 桉赅蝈 溧 磬镳噔栩 ?"
+msgid "simple"
+msgstr "镳铖"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "扬钿咫礤蝾 磬 怵赅蜞 犏 软蝈痦弪 忮麇 嚓蜩忤疣眍"
+msgid "Clear all"
+msgstr "如麒耱 怦梓觐"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "No test pages"
+msgstr "铃 蝈耱钼 耱疣龛鲨"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "冷囡蝈 %s: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "销"
+msgid "Falkland Islands (Malvinas)"
+msgstr "灶腙脲礓耜 务蝠钼 (锑脞桧)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "沭箫 :"
+msgid "Unknown model"
+msgstr "湾桤忮耱屙 祛溴"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "项蝠遽栩咫:"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
+"嚓 玎溧屙 溧, 镳钼屦忄 羿殡钼弪/滂疱牝铕梃蝈 漕耱龛 玎 镨襦礤 铗 "
+"怦尻."
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "如犷 磬 嵇"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "蠕屙蜩翳赅鲨"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "镳 镳钼屦赅, 耦狁蜮屙桕 沭箫囹 爨 溧 狷溧 镳铎屙屙"
+msgid "Backup Now"
+msgstr "绣珏疴眍 觐镨 皴汔"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "如镱腌忄 id 磬 沭箫 镳 桤嵇腠屙桢"
+msgid "/_File"
+msgstr "/_脏殡"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "如镱腌忄 id 磬 耦狁蜮屙桕 镳 桤嵇腠屙桢"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "橡屐圊忄 镳桧蝈 铗 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"玛膻麒 翳腧痂疣礤蝾 磬 镟赍蜩 玎 Linux 漯 皴痂 2.2, 玎\n"
+"磬耱痤赅 磬 玎蝽囹 耱屙, s cel 玎蜞忄 磬 爨磬蜞 忤 铗\n"
+"祓彐钼 囹嚓."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "青溧忄-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "亦扈腭赅 (ISCII-镱漯邃徉)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "青溧忄-UID"
+msgid "Mayotte"
+msgstr "锑轭"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-徼"
+msgid "Creating auto install floppy..."
+msgstr "项溷铗 滂耜弪 噔蝾爨蜩黜 桧耱嚯圉"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Property"
-msgstr "杨狁蜮屙铖"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "祟赅脲 镳桧蝈"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Permissions"
-msgstr "橡噔"
+msgid "Partitioning"
+msgstr "朽玟咫礤 磬 腩忮"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Current user"
-msgstr "义牦 镱蝠遽栩咫"
+msgid "Russia"
+msgstr "畜耔"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr "镳邈脲"
+msgid "ethernet card(s) detected"
+msgstr "ethernet 赅痱 玎皴麇龛"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
-msgstr "绣溧牝桊 蝈牦蝾 镳噔桦"
+msgid "Syslog"
+msgstr "谚耱屐屙 骟痦嚯"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
-msgstr "疱溧牝桊"
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Delete selected rule"
-msgstr "如蝠桠 桤狃囗铗 镳噔桦"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "delete"
-msgstr "桤蝠桠"
+msgid "Not enough free space for auto-allocating"
+msgstr "爨 漕耱囹眍 耱 玎 噔蝾爨蜩黜 疣顼疱溴礤"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "念徉 眍忸 镳噔桦 磬 牮"
+msgid "Set root password"
+msgstr "满忮溴蝈 镟痤豚 玎 root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "add a rule"
-msgstr "漕徉 镳噔桦"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"爨 疋钺钿屙 漯嚅忮 玎 忄蜞 玮箨钼 赅痱 (%s), 眍 桁 耦狁蜮屙 漯嚅忮 "
+"磬 \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "橡屐羼蜮 桤狃囗铗 镳噔桦 邃眍 龛忸 磬漕塍"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"央邃 镳铎磬 泐脲扈磬蜞 磬 豚 %s, 溧眄鑤e 恸瘐 礤泐  狷溧 玎泱徨龛"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Down"
-msgstr "念塍"
+msgid "Internet connection configuration"
+msgstr "袜耱痤殛 磬 软蝈痦弪 怵赅"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "/_About..."
+msgstr "/_悟眍耥..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Bengali"
+msgstr "铃磴嚯耜"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "permissions"
-msgstr "镳噔"
+msgid "Preference: "
+msgstr "橡邃镱麒蜞龛: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "group"
-msgstr "沭箫"
+msgid "Wizard..."
+msgstr "锑泓铖龛..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "user"
-msgstr "项蝠遽栩咫"
+msgid "Services: %d activated for %d registered"
+msgstr "玉塍汨: %d 嚓蜩忤疣龛 铗 %d 疱汨耱痂疣龛"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "漾玟噔囗 磬 boot-滂耜弪"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "体耱铒铍铈屙桢 磬 auto_install.cfg 羿殡"
+msgid "Solomon Islands"
+msgstr "杨腩祛眍忤 务蝠钼"
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "(module %s)"
+msgstr "(祛潴 %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Workgroup"
+msgstr "朽犷蝽 沭箫"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer host name or IP"
+msgstr "褥 磬 躅耱 玎 镳桧蝈疣 桦 IP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "祟赅脲 镳桧蝈"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "褥弪 磬 镳桧蝈疣 蝠徕 溧 聱潸疰 襦祛 狍赈, 麒耠 镱澉屦蜞怅"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (桧耱嚯圉 沭圄梓屙 漯嚅忮)"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Show current interface configuration"
+msgstr "项赅玮 觐眙桡箴圉 磬 蝈牦 桧蝈痿彘"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "朽琊噌铗赅"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Done"
+msgstr "妙蝾忸"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "Web Server"
+msgstr "Web 漾疴"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "软蝈痿彘 %s (磬 祓彐 %s)"
+msgid "Chile"
+msgstr "阻腓"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"填, 桤徨疱蝈 觐 祓彐钼 噤囡蝈 溧 桤镱腌忄 玎 怵赅 犏 dhcp 聱疴."
+"Inkjet 镳桧蝈痦栩 漯嚅忮痂 镳邃铖蜞忮龛 铗 Lexmark 镱滗驵 襦祛 腩赅腠 "
+"镳桧蝈痂, 徨 镳桧蝈痂 磬 铗溧脲麇龛 爨龛 桦 镳桧蝈痦 爨龛. 填, "
+"疋驽蝈 镳桧蝈疣 耔 磬 腩赅脲 镱痱 桦 泐 磬耱痤轵 磬 爨磬蜞, 犏 觐蝾 "
+" 疋玎."
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"袜 嵇 耱 溧 磬耱痤栩 觐祜 耔 蜞赅, 麇 溧 镱溴 软蝈痦弪 怵赅蜞\n"
-"耔. 蜞玷 恸珈铈眍耱, 漯筱 觐祜痂 腩赅腠囹 忤 祓彐  祛汔 溧\n"
-"桤镱腌忄 软蝈痦弪 怵赅蜞 磬 蝾玷 觐祜.\n"
-"\n"
-"悟徨脲驽蝈: 蝠徕 忤 铗溴脲 玎 蝾忄 祓彐钼 噤囡蝈, 玎 溧 篑蜞眍忤蝈 "
-"恸蝠屮磬蜞 耔 祓彐 (LAN)."
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "暑眙桡箴桊囗 磬 软耱嚯圉桀礤 漾疴"
+msgid "(already added %s)"
+msgstr "(忮麇 镳栳噔桴 %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "暑眙桡箴桊囗 磬 PXE 聱疴"
+msgid ", using command %s"
+msgstr ", 桤镱腌忄 觐爨礓 %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "填, 桤鬣赅轵, 篑蜞眍忄 铒鲨栩 镱 玎蜞..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt Shift 觌噔桫 邃眍怵屐屙眍"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "填, 桤徨疱蝈 龛忸 磬 耔泱痦铖..."
+msgid "Flags"
+msgstr "噪嚆钼"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
+msgid "Add/Del Users"
+msgstr "念徉/如蝠桠 镱蝠遽栩咫"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "System Options"
-msgstr "谚耱屐龛 铒鲨"
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Network Options"
-msgstr "甜彐钼 铒鲨"
+msgid "Settings"
+msgstr "袜耱痤殛"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "满忮溴龛 躅耱/祓彐 IP 礤 镳噔桦屙.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "膨 嵇脲 耧桉 磬 漕耱瘊镯栩 耱疣龛"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "离蝈痦囹桠磬 蝈耱钼 耱疣龛鲟 (4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"狸 桁囹 怦梓觇 CD-蜞 铗 耧桉 镱-泐疱, 磬蜩耥弪 Ok.\n"
+"狸 爨蝈 龛蝾 邃眍 铗 蝈玷 CD-蜞, 磬蜩耥弪 悟磬.\n"
+"狸 忤 腓锺忄 觐 CD-蜞, 爨蹴弪 汨, 磬蜩耥弪 Ok. "
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "冷扈龛耱疣蝾 镱 玎蜞:"
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "橡邃箫疱驿屙 玎 玎蜞:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "丸忸 磬 耔泱痦铖:"
+msgid "Backup user files"
+msgstr "绣珏疴眍 觐镨 磬 镱蝠遽栩咫耜 羿殡钼"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(镱漯噻徼疣 耱铋眍耱: %s)"
+msgid "New"
+msgstr "皖"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
+" 蝾玷 祛戾眚, 蝠徕 溧 桤徨疱蝈 龛忸蝾 磬 耔泱痦铖, 觐弪 桉赅蝈 玎\n"
+"爨磬蜞. 项 镳噔桦, 觐腙铗 镱忮麇 爨磬蜞 忤 漕耱磬 觐腙铗 "
+"镱忮麇\n"
+"溧眄 皴 聱躔囗忄 磬 礤, 蝾腙钼 镱-忤耦觐 蝠徕 溧 龛忸蝾 磬 "
+"耔泱痦铖.\n"
+"满镳尻 蝾忄, 忤耦赅蜞 耔泱痦铖 玎 耢弪赅 磬 脲觐蜞蜞 磬 疣犷蜞.\n"
+"吾礤蝈 皴 犏 汶噔囹 MSEC 磬 Reference Manual, 玎 溧 镱塍麒蝈 镱忮麇 "
+"桧纛痨圉\n"
+"玎 珥圜屙桢蝾 磬 蝈玷 龛忄.\n"
+"\n"
+"狸 礤 珥噱蝈 赅牝 溧 桤徨疱蝈, 桤徨疱蝈 铒鲨蜞 镱 镱漯噻徼疣礤."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "爨 磬戾疱磬 玮箨钼 赅痱!"
+msgid "Load from floppy"
+msgstr "青疱滂 铗 滂耜弪"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr ""
+msgid "The following printer was auto-detected. "
+msgstr "央邃龛蝈 镳桧蝈痂 襦 噔蝾爨蜩黜 铗牮栩. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "缅礤痂疣 镳邈脲..."
+msgid "Boot Floppy"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "妈 蝠徕 溧 桤徨疱蝈 嵇疴 沭圄梓屙 羿殡!"
+msgid "Norwegian"
+msgstr "皖疴彐赅"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "祟赅脲 镳桧蝈"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "如犷 磬 鲡 玎 脲眚囹 磬 镳钽疱"
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web 漾疴"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
+msgid "select path to restore (instead of /)"
+msgstr "桤犷 磬 嵇 玎 恸珩蜞眍忄礤 (忪羼蝾 /)"
#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "choose image file"
-msgstr "如徨疱蝈 羿殡"
+msgid "Configure bootsplash picture"
+msgstr "袜耱痤殛 磬 篑塍汨蝈"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "如徨疱蝈 羿殡"
+#: ../../lang.pm:1
+#, c-format
+msgid "China"
+msgstr "疏蜞"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (俞邃弪 皴, 麇 镳桧蝈痂蝈 襦 疋玎龛 怅膻麇龛).\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "灭箸"
+
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "袜耱痤殛 磬 篑塍汨蝈"
+msgid "Reading data of installed printers..."
+msgstr "祟赅脲 镳桧蝈"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid " Erase Now "
+msgstr " 如蝠桠 皴汔 "
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr "聱疴"
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "央铈弪 FAT 纛痨囹桊囗 滂耜弪 篑蝠铋耱忸 %s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Display logo on Console"
-msgstr "项赅玮 腩泐 磬 暑礴铍"
+msgid "Please Wait... Applying the configuration"
+msgstr "填, 镱鬣赅轵 ... 橡桦嚆囗 磬 磬耱痤殛栩"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose color"
-msgstr "如徨痤 磬 鲡"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "念狃 漕 GRUB ,玎 桤犷 磬 铒屦圉桀眄囹 耔耱屐!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Save theme"
-msgstr "青镟玮 蝈爨"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Preview"
-msgstr "橡邈脲"
+msgid "SCSI controllers"
+msgstr "SCSI 觐眚痤脲痂"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "鲡弪 磬 脲眚囹 玎 镳钽疱"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " 磬 LPD 聱疴 \"%s\", 镳桧蝈 \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "忤耦麒磬蜞 磬 脲眚囹 玎 镳钽疱"
+msgid "Choosing a display manager"
+msgstr "如犷 磬 戾龛滏 磬 滂耧脲"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "褥 磬 躅耱:"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "痂磬蜞 磬 脲眚囹 玎 镳钽疱"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP 噤疱聱 蝠徕 溧 狷溴 恸 纛痨囹 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"脲眚囹 玎 镳钽疱 y 觐铕滂磬蜩\n"
-"铗 泐痦 "
+msgid "Ecuador"
+msgstr "抨忄漕"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"脲眚囹 玎 镳钽疱 x 觐铕滂磬蜩\n"
-"铗 泐痦 "
+msgid "Add an item"
+msgstr "念徉礤 磬 钺尻"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "text box height"
-msgstr "忤耦麒磬 磬 疣礻 玎 蝈犟"
+msgid "The printers on this machine are available to other computers"
+msgstr "橡桧蝈痂蝈 磬 蜞玷 爨磬 漕耱龛 玎 漯筱栩 觐祜痂"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text width"
-msgstr "痂磬 磬 蝈犟"
+msgid "I can't find needed image file `%s'."
+msgstr "湾 祛汔 溧 磬戾 眢骓 赅痱桧赅 `%s'."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y 觐铕滂磬蜩 磬 蝈犟蝾忄蜞 疣礻郳n"
-" 狃铋 耔焘铍"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "爨 铗牮栩 玮箨钼 赅痱. 物栩嚅蝈 \"harddrake\" 耠邃 桧耱嚯圉蜞"
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"x 觐铕滂磬蜩 磬 蝈犟蝾忄蜞 疣礻郳n"
-" 狃铋 耔焘铍"
+"青溧溴 沭屮屙 镱痱: %s.\n"
+"灶痨囹 \"port/tcp\" 桦 \"port/udp\", \n"
+"犏溴蝾 镱痱 戾驿 1 65535."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid "Browse"
-msgstr "橡邈脲"
+msgid "Shell"
+msgstr "劐"
-#: ../../standalone/draksplash:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Theme name"
-msgstr "褥 磬 蝈爨"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "朽玟咫栩咫磬 耧铖钺眍耱"
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "燕 翌戾 橡桧耔镨"
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "first step creation"
-msgstr "嵇疴 耱赅 磬 聱玟噔囗"
+msgid "Can't login using username %s (bad password?)"
+msgstr "湾 祛汔 溧 怆玎 赅蝾 桤镱腌忄 桁 %s (沭屮磬 镟痤豚?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Azerbaidjani (latin)"
+msgstr "犁屦徉殇驵眈赅 (豚蜩龛鲟)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "Package not installed"
+msgstr "相赍蜞 礤 桧耱嚯桊囗"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "羊囗弪 MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+msgid "American Samoa"
+msgstr "漓屦桕囗耜 燕祛"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Have a nice day!"
-msgstr ""
+msgid "Protocol"
+msgstr "橡铗铌铍"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr ""
+msgid "Copy fonts on your system"
+msgstr "暑镨疣 梏蝾忮 磬 忄蜞 耔耱屐"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "项忤 皴 沭屮赅 镳 耜囗桊囗 玎 TV 赅磬腓"
+msgid "Harddrake help"
+msgstr "Harddrake 镱祛"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
+msgid "Bogomips"
+msgstr "令泐扈锺"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Mandrake Terminal Server Configuration"
+msgstr "暑眙桡箴圉 磬 义痨桧嚯屙 漾疴 Mandrake "
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Area:"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "TV norm:"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "if set to yes, check open ports."
+msgstr "嚓 玎溧溴眍 溧, 镳钼屦忄 铗忸疱龛蝈 镱痱钼"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Newzealand"
+msgid "You can't select/unselect this package"
+msgstr "湾 祛驽蝈 溧 铗徨脲驽蝈/溴铗徨脲驽蝈 蝾玷 镟赍"
+
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "橡邃箫疱驿屙桢"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "France [SECAM]"
-msgstr "责囗鲨 [SECAM]"
+msgid "Remote host name"
+msgstr "褥 磬 铗溧脲麇 躅耱"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "East Europe"
-msgstr "如蝾黜 赔痤镟"
+msgid "deactivate now"
+msgstr "溴嚓蜩忤疣 皴汔"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "West Europe"
-msgstr "青镟漤 赔痤镟"
+msgid "access to X programs"
+msgstr "漕耱 漕 X 镳钽疣扈"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Computing the size of the Windows partition"
+msgstr "如麒耠忄 疋钺钿眍蝾 耱 磬 Windows "
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "Italy"
+msgstr "闰嚯"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Name of printer"
+msgstr "褥 磬 镳桧蝈"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Canada (cable)"
-msgstr "枢磬溧 (赅徨)"
+msgid "disable"
+msgstr "桤觌"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "沭屮赅 镳 溴祛眚桊囗 磬 %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "Do it!"
+msgstr "袜镳噔 泐!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "Cayman Islands"
+msgstr "枢殪囗钼 务蝠钼"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "嵇疴"
+msgid "Select model manually"
+msgstr "如犷 磬 祛溴 瘊黜"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "secondary"
-msgstr "怛铕"
+msgid "Format"
+msgstr "灶痨囹桊嚅"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"袜-麇耱 磬麒 玎 疋玮囗 黟彗 ADSL PPPOE.\n"
+"觐 怵觇 桤镱腌忄 PPTP, ma腙 桤镱腌忄 DHCP.\n"
+"狸 礤 珥噱蝈, 桤徨疱蝈 '桤镱腌忄 PPPOE'."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "湾桤忮耱屙 祛溴"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Various"
+msgstr "朽珉梓龛"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "湾桤忮耱屙 祛溴"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
+msgstr "Zip 篑蝠铋耱忸"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "如嵇腠忄 \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "如嵇腠忄 桧耱痼戾眚 玎 觐眙桡箴桊囗"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"悟徨脲驽蝈 镳桧蝈痂蝈, 觐栩 桉赅蝈 溧 镳艴恸痣栩 鳅觏弪錦n"
+"\"橡艴恸痣鑌"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "袜耱痤殛 磬 祛潴"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "软纛痨圉"
+msgid "Albanian"
+msgstr "离徉眈赅"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "悟牮栩 踵痄箦"
+msgid "Lithuania"
+msgstr "髓蜮"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 忮瘃 "
+msgid "Compact"
+msgstr "暑祜嚓蝈"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "悟牮桠囗 镳钽疱"
+msgid "Detected model: %s %s"
+msgstr "悟牮栩 祛溴: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "棱蝾:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"翌忄 HardDrake, 踵痄箦疱 觐眙桡箴圉桀礤 桧耱痼戾眚 磬 Mandrake.\n"
"洛瘃:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "悟眍耥 Harddrake"
+msgid "Local files"
+msgstr "祟赅腠 羿殡钼"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_悟眍耥..."
+msgid "maybe"
+msgstr "耱噔"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_软纛痨桊嚅 玎 狷"
+msgid "Panama"
+msgstr "相磬爨"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "如徨疱蝈 篑蝠铋耱忸 !"
+msgid "Monitor"
+msgstr "填龛蝾"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
"\n"
-msgstr ""
-"物桉囗桢 磬 镱脲蜞蜞:\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake 镱祛"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_项脲蜞 铒桉囗桢"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_项祛"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 蹊滂 鲡蜞 (16 徼蜞)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Quit"
-msgstr "/_如腓玎"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/棱蝾爨蜩黜 铗牮桠 _jazz 篑蝠铋耱忄"
+msgid "Size: %d KB\n"
+msgstr "妙脲扈磬: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/棱蝾爨蜩黜 铗牮桠 _祛溴扈"
+msgid "Remove fonts on your system"
+msgstr "如蝠桠 梏蝾忮 铗 忄蜞 耔耱屐"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/棱蝾爨蜩黜 铗牮桠 _镳桧蝈痂"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_物鲨"
+msgid "Graphical interface at startup"
+msgstr "X 镳 耱囵蜩疣礤 磬 耔耱屐囹"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "桁弪 磬 镳铊玮钿栩咫 磬 镳铞羼铕"
+msgid "Please enter the directory to save:"
+msgstr "填, 恸忮溴蝈 滂疱牝铕蜞 玎 玎镟玮囗:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "桁弪 磬 镳铊玮钿栩咫 磬 篑蝠铋耱忸蝾"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "填, 桤徨疱蝈 蜩镟 磬 磬蜞 犏 觐蝾 疋玎磬 扈囹 忤."
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "爨 漕耱囹眍 腩忮 玎 RAID 龛忸 %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"央邃龛蝈 镳桧蝈痂 襦 磬耱痤屙. 助觏弪 磬 邃桧 铗 , 玎 溧 泐 疱溧牝桊囹 "
+"桦 玎 溧 镱塍麒蝈 桧纛痨圉 玎 礤泐."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "灶痨囹桊囗"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "the number of the processor"
-msgstr "眍戾瘊 磬 镳铞羼铕"
+msgid "Connected"
+msgstr "砚玎"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "橡铞羼铕 ID"
+msgid "USB printer \\#%s"
+msgstr "USB 镳桧蝈 \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "network printer port"
-msgstr "镱痱 磬 祓彐钼 镳桧蝈 "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "桁弪 磬 镳铊玮钿栩咫 磬 篑蝠铋耱忸蝾"
+msgid "Macedonian"
+msgstr "锑赍漕眈赅"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "褥"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "眍戾瘊 磬 镳铞羼铕"
+msgid "Bridges and system controllers"
+msgstr "琉桎骖忮 耔耱屐龛 觐眚痤脲痂"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "琉铋 狍蝾龛"
+msgid "/File/_Save"
+msgstr "/脏殡/_青镨"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "Mali"
+msgstr "锑腓"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Model name"
-msgstr "褥 磬 祛溴"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "项漯钺眍耱"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "缅礤疣鲨 磬 cpu (磬镳: 8 玎 PentiumIII, ...)"
+msgid "very nice"
+msgstr "祉钽 漕狷"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "填溴"
+msgid "Preview"
+msgstr "橡邈脲"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "祛溴 磬 蜮 滂耜"
+msgid "Remote Control"
+msgstr "悟溧脲麇 觐眚痤"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "觌囫 踵痄箦痦 篑蝠铋耱忸"
+msgid "Please select media for backup..."
+msgstr "填, 桤徨疱蝈 眍耔蝈 玎 恸珩蜞眍忄礤..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "孰囫 眍耔蝈"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 聱疴: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP 觌桢眚"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "丸忸"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "灭箸桧耜 (\"畜耜郳" 磬疱溽)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_物鲨"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "灶痨囹桊 綦铒"
+msgid "Your printer model"
+msgstr "锣 祛溴 镳桧蝈"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(闲拍酉信颇磐扰! 妈 桤镱腌忄蝈 XFS 玎 忄蜞 觐疱眍忄 羿殡钼 耔耱屐,\n"
+"聱玟噔囗弪 磬 bootdisk 恸瘐 1.44 提 綦铒 爨 溧 篑镥,\n"
+"镱礤驽 XFS 皴 眢驿噱 铗 祉钽 镱忮麇 耱)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "暑眙桡箴圉 磬 义痨桧嚯屙 漾疴 Mandrake "
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Save"
+msgstr "青镟玮"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "The %s is unsupported"
+msgstr "%s 礤 皴 镱潸疰"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "青疱驿囗 漯嚅忮痂 玎 忄蝈 USB 篑蝠铋耱忄."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Disk"
+msgstr "蔫耜"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "满忮溴蝈 URI 磬 镥鬣蜞 篑蝠铋耱忸"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Fdiv bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "噪嚆钼 磬 CPU 聱钺龛 铗 漯铗"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "噪嚆钼"
+msgid "Israel"
+msgstr "如疣咫"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "French Guiana"
+msgstr "责屙耜 免栲磬"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "填潴"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "眍忸 滂磬扈黜 篑蝠铋耱忸 沐礤痂疣眍 铗 漯铗 devfs"
+msgid "add a rule"
+msgstr "漕徉 镳噔桦"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "皖忸 devfs 篑蝠铋耱忸"
+msgid "A command line must be entered!"
+msgstr "茵徕 溧 狷溴 恸忮溴 觐爨礓屙 疱!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+msgid "Select user manually"
+msgstr "如徼疣 镱蝠遽栩咫 瘊黜"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "羊囵 羿殡 磬 篑蝠铖蜮"
+msgid "Transfer printer configuration"
+msgstr "橡屙铖 磬 磬耱痤殛 磬 镳桧蝈"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "翌忄 镱脲 铒桉忄 篑蝠铋耱忸蝾"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "锐赅蝈腓 溧 疣琊屮栩 镥鬣 玎 镳桧蝈痂蝈 耧铎屙囹 泐疱?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "族耱铗 磬 镳铞羼铕 Mhz"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "族耱铕蜞 (MHz)"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "项痱"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "祟 backup-羿殡"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "丸忸 磬 耔泱痦铖"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"彦汔 祛戾眚 溧 铒疱溴腓蝈 觐 镳钽疣扈 桉赅蝈 溧 狷溧 桧耱嚯桊囗 磬\n"
+"耔耱屐囹 忤. Mandrake Linux 滂耱痂狍鲨蜞 桁 蹊滂 镟赍蜩, 眍 礤 錦n"
+"玎潸腈栩咫眍 溧 汨 珥噱蝈 磬桤篑.\n"
+"\n"
+"狸 桤恸瘌忄蝈 耱囗溧痱磬 桧耱豚鲨 铗 CDROM, 嵇疴  狷溴蝈 镱镨蜞龛 觐鑌n"
+"CD-蜞 桁囹 ( 抨耧屦蝈 疱骅). 橡钼屦弪 玎汶噔蜞 磬 CD-蜞蜞 镱耦麇蝈\n"
+"牦蜩殛栩 聱铗忮蝰蜮帙 磬 CD-蜞蜞, 觐栩 疣顼铍嚆囹. 助觏弪 \"OK\",\n"
+"觐汔蝾 耱 泐蝾忤 溧 镳钿骅蝈.\n"
+"\n"
+"相赍蜩蝈 襦 镱漯邃屙 沭箫 聱铗忮蝰蜮帙 磬 镳嚓蜩麇耜囹 箫铗疱徉 磬\n"
+"爨磬蜞 忤. 灭箫栩, 襦扈 镱 皴徨 耔, 襦 镱漯邃屙 麇蜩痂 皴牿梃:\n"
+"\n"
+" * \"朽犷蝽 耱囗鲨\": 嚓 耢蜞蝈 溧 桤镱腌忄蝈 爨磬蜞 耔 赅蝾 疣犷蝽 "
+"耱囗鲨,\n"
+"桤徨疱蝈 邃磬 桦 镱忮麇 聱铗忮蝽栩 沭箫.\n"
+"\n"
+" * \"朽琊噌铗赅\": 嚓 爨磬蜞 忤  狷溴 桤镱腌忄礤 玎 镳钽疣扈疣礤, "
+"桤徨疱蝈\n"
+"驽豚磬蜞(栩) 沭箫().\n"
+"\n"
+" * \"漾疴\": 磬牮, 嚓 爨磬蜞 忤  狷溴 桤镱腌忄磬 玎 聱疴, \n"
+"祛驽蝈 溧 桤徨疱蝈 觐 铗 磬-麇耱 桤镱腌忄龛蝈 篑塍汨 桉赅蝈 溧 桁囹錦n"
+"桧耱嚯桊囗 磬 爨磬蜞.\n"
+"\n"
+" * \"灭圄梓磬 耩邃郳": 蝮 祛驽蝈 溧 桤徨疱蝈 镳邃镱麒蜞磬蜞 沭圄梓磬 "
+"耩邃.\n"
+"项礤 邃磬 蝠徕 溧 狷溴 桤狃囗, 嚓 桉赅蝈 溧 桁囹 沭圄梓磬 耩邃 !\n"
+"\n"
+"橡屐羼蜮嚅觇 牦瘃铕 磬 扈囹 磬 桁弪 磬 沭箫囹,  忤滂蝈 牮囹\n"
+"钺耥屙栩咫屙 蝈犟 玎 礤.\n"
+"\n"
+"填驽蝈 溧 鳅觏弪 牦蜩殛囹 \"软滂忤潴嚯屙 桤犷 磬 镟赍蜩\", 觐蝾 "
+"镱脲珥,\n"
+"嚓 耱 玎镱珥囹 镟赍蜩蝈, 觐栩  忤 狷溧 镳邃腩驽龛 桦 嚓 桉赅蝈 "
+"溧\n"
+"桁囹 嵇脲 觐眚痤 磬 蝾忄, 觐弪 溧 狷溴 桧耱嚯桊囗.\n"
+"\n"
+"狸 耱 玎镱黜嚯 桧耱嚯圉蜞 疱骅 磬 \"吾眍忄礤\", 祛驽蝈 溧 "
+"桤觌栩錦n"
+"怦梓觇 沭箫, 玎 溧 桤徨沩弪 桧耱嚯桊囗弪 磬 眍忤 镟赍蜩. 翌忄 镱脲珥頫n"
+"镳 镱镳噔赅 桦 钺眍忄礤 磬 聱耱怏忄蜞 耔耱屐."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "羿扈腓 cpu (磬镳: 6 玎 i686 觌囫)"
+msgid "Accept user"
+msgstr "橡桢扈 镱蝠遽栩咫"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Server"
+msgstr "漾疴"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "祟 桤犷, 铒栩嚅蝈 铗眍忸\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Heard and McDonald Islands"
+msgstr "怔痄 锑昴铐嚯 务蝠钼"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "爨 嚯蝈痦囹桠屙 漯嚅忮"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "橡屐桧 抨耧屦蝈 疱骅"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "朽珈屦 磬 怛铕梓屙 赍 磬 cpu"
+msgid "(on this machine)"
+msgstr "(磬 蜞玷 爨磬)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "朽珈屦 磬 赍"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway 噤疱襦 蝠徕 溧 狷溴 恸 纛痨囹 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Looking at packages already installed..."
+msgstr "寅瘃 恸 忮麇 桧耱嚯桊囗栩 镟赍蜩..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "蠕屙蜩翳赅鲨 磬 磬"
+msgid "Driver"
+msgstr "酿嚅忮"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf 镱觐汔 箴彐溧 桤恸瘌忄礤蝾 磬 疣珉梓龛 玎溧麒\n"
+"镳 耱囵蜩疣礤 玎 镱滗瘊骊 磬 耔耱屐磬蜞 磬耱痤殛."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "令泐扈锺"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI 赅磬"
+msgid "Printer on remote lpd server"
+msgstr "橡桧蝈 磬 铗溧脲麇 LPD 聱疴"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "枢磬"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"蝾忄 翳玷麇耜囹 磬 磬 觐轵 玎赅麇眍 篑蝠铖蜮铗 (磬镳: PCI, USB, ...)"
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "罔磬"
+msgid "No mouse"
+msgstr "铃 扈"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "耧桉 磬 嚯蝈痦囹桠龛 漯嚅忮痂 玎 蜞玷 赅痱"
+msgid "Germany"
+msgstr "缅痨囗"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "离蝈痦囹桠龛 漯嚅忮痂"
+msgid "Austria"
+msgstr "棱耱痂"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "锐赅蝈 腓 BackSpace 溧 镱溧忄 Delete 磬 觐礴铍囹 ?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"如嵇腠弪 \"sndconfig\" 耠邃 桧耱嚯圉 玎 溧 觐眙桡箴桊囹 忄蜞 玮箨钼 "
+"赅痱"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "填, 桤徨疱蝈 镱漯彐溧礤 磬 觌噔栲蝮疣蜞."
+msgid "Collapse Tree"
+msgstr "如麒耱 潸疴铗"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "湾 祛汔 溧 矬耥 钺眍忄礤蝾 !!!\n"
+msgid "Auto Install Configurator"
+msgstr "袜耱痤轺桕 磬 噔蝾爨蜩黜 桉眚嚯圉"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"填, 耠铈弪 软耱嚯圉桀眄 CD-ROM 篑蝠铋耱忸蝾 磬蜩耥弪 Ok, 觐汔蝾 "
-"耱 泐蝾忤.\n"
-"狸 泐 爨蝈, 磬蜩耥弪 悟磬, 玎 溧 桤徨沩弪 桧耱嚯桊囗弪 铗 蝾玷 CD-"
-"ROM."
+msgid "Configure networking"
+msgstr "袜耱铋赅 磬 祓彐囹"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "鸯磬 磬 CD-ROM"
+msgid "Where do you want to install the bootloader?"
+msgstr "竖溴 桉赅蝈 溧 桧耱嚯桊囹 bootloader-?"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+"填, 鳅觏弪 磬 镳邃镱麒蜞龛 彗桕 磬 桧耱嚯圉 耔耱屐磬 箫铗疱徉.\n"
+"\n"
+"助赅礤蝾 磬 狍蝾磬 \"袜镳邃龛鬣鈂"  忤 镱玮铍 溧 桤徨疱蝈 漯筱 彗桷鑌n"
+"溧 狷溧 桧耱嚯桊囗 磬 疣犷蝽囹 忤 耱囗鲨. 如徼疣礤蝾 磬 漯筱 彗桷鑌n"
+" 桧耱嚯桊 羿殡钼 耧弼桠梓龛 玎 彗桷栩 玎 耔耱屐磬 漕牦戾眚圉 鑌n"
+"镳桦铈屙. 袜镳桁屦, 嚓 桁囹 镱蝠遽栩咫 铗 如镟龛 磬 爨磬蜞 耔,\n"
+"桤徨疱蝈 囗汶栝耜 赅蝾 汶噔屙 彗桕 潸疴钼桎磬蜞 纛痨 皴牿\n"
+"\"袜镳邃龛鬣鈂" 鳅觏弪 磬 耔忄蜞 玮彗溧 聱铗忮蝰蜮帙 磬\n"
+"\"锐镟眈觇|锐镟龛\".\n"
+"悟徨脲驽蝈, 麇 祛汔 溧 狷溧 桧耱嚯桊囗 觐腙 彗桕. 洛漤 桤狃囗\n"
+"赅犏 腩赅, 鳅觏弪 狍蝾磬 \"OK\", 玎 溧 镳钿骅蝈."
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "橡铎屙栩 襦 玎镟珏龛, 眍 玎 溧 狷溧 弭尻蜩忭 蝠徕 溧 桤脲珏蝈"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s 礤 皴 镱潸疰 铗 蜞玷 忮瘃 磬 Mandrake Linux."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Save as.."
-msgstr "青镟玷 赅蝾..."
+msgid "DHCP client"
+msgstr "DHCP 觌桢眚"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "填, 恸忮溴蝈 漕塍 忄 噤疱 磬 烹. 镱"
+msgid "Restoring from file %s failed: %s"
+msgstr "满珩蜞眍忄礤蝾 铗 羿殡 %s 礤 篑: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "觐眙桡箴圉 磬 蝠邂钽"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (皴痂轫, 铗 耱囵 蜩 C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "妈  镱塍麒蝈 蝠邂钽 嚓 磬蝾忄疴囗弪 镱-忤耦觐 铗 蜞玷 耱铋眍耱"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "谚泱痦 腓 耱, 麇 桉牝 溧 磬耱痤栩 镥鬣 玎 蜞玷 爨磬?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "load setting"
-msgstr "篑蜞眍忄礤 磬 磬蝾忄疴囗"
+msgid "New devfs device"
+msgstr "皖忸 devfs 篑蝠铋耱忸"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-"妈  镱塍麒蝈 蝠邂钽 嚓 邃眍 铗 桤狃铄龛蝈 钺耠箧忄龛 礤 皴 桤嵇腠忄 "
-"镱忮麇"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "service setting"
-msgstr "篑蜞眍忄礤 磬 钺耠箧忄龛"
+msgid "Boot Style Configuration"
+msgstr "袜耱痤殛 磬 磬麒磬 磬 耱囵蜩疣礤"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "棱蝾爨蜩黜 耔眭痤龛玎鲨 磬 怵屐弪 (桤镱腌忄 NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd 钺耠箧忄礤"
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin 吾耠箧忄礤"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "岭嚆钿囵桁 忤, 麇 桤狃圊蝈 Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH 漾疴"
+msgid "Armenian (phonetic)"
+msgstr "鲤戾眈赅 (纛礤蜩麇)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba 漾疴"
+msgid "Card model:"
+msgstr "填溴 磬 赅痱:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "DHCP 觌桢眚"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix 项眈觇 聱疴"
+msgid "Start Server"
+msgstr "羊囵蜩疣 聱疴"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Ftp 漾疴"
+msgid "Turkmenistan"
+msgstr "殷痍戾龛耱囗"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "褥 磬 漕戾轫"
+msgid "All remote machines"
+msgstr "(磬 蜞玷 爨磬)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web 漾疴"
+msgid "Install themes"
+msgstr "软耱嚯桊囗 磬 蝈扈"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"念狃 漕 磬耱痤殛囹 磬 Proxy.\n"
-"\n"
-"殷  祛驽蝈 溧 篑蜞眍忤蝈 忄蝈 HTTP FTP proxy\n"
-"聱 桦 徨 镱蝠遽栩咫耜 桁 镟痤豚\n"
+" 钺眍忄龛 2002 MandrakeSoft 铗 Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "暑眙桡箴圉 玎 镱漯邃徉 磬 镱"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "项漯邃徉 磬 镱"
+msgid "Preparing installation"
+msgstr "项溷铗 桧耱嚯圉蜞"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "祛 桤鬣赅轵, 镳噔 疣玑铕 磬 羿殡: %s"
+msgid "Edit selected host/network"
+msgstr "绣溧牝桊囗 磬 桤狃囗 躅耱/祓彐"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "漾潸疰囗桢 磬 羿殡"
+msgid "Add User -->"
+msgstr "念徉 镱蝠遽栩咫 -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "枢脲礓囵"
+msgid "Nauru"
+msgstr "袜箴"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "如徨疱蝈 羿殡"
+msgid "True Type fonts installation"
+msgstr "软耱嚯桊囗 磬 True Type 梏蝾忮"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "眍 礤 聱怙噤"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "棱蝾爨蜩黜 铗牮桠 镳桧蝈痂 疋玎龛 滂疱牝眍 犏 腩赅腠囹 祓彐"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "聱怙噤屙桢"
+msgid "LAN configuration"
+msgstr "袜耱痤殛 磬 LAN"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "袜耱痤殛"
+msgid "hard disk model"
+msgstr "祛溴 磬 蜮 滂耜"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "软耱痼戾眚 玎 镳邈脲驿囗 磬 忄蝈 腩 羿殡钼"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "湾 祛驽蝈 溧 桤镱腌忄蝈 LVM 蜩 玎 耱 磬 祛眚桊囗 %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "蝥瘃"
+msgid "Get Windows Fonts"
+msgstr "络桁 梏蝾忮 磬 Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr ""
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "谚耱屐屙 骟痦嚯"
+msgid "Iranian"
+msgstr "瑞囗耜"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "漾钺龛"
+msgid "Croatia"
+msgstr "怔疴囹"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "项蝠遽栩咫"
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/项祛/_悟眍耥..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "念徉忤 镱蝠遽栩咫"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/物鲨/义耱"
+msgid "Remote printer name"
+msgstr "褥 磬 铗溧脲麇 镳桧蝈"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/脏殡/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/脏殡/青镨 _赅蝾"
+msgid "Device: "
+msgstr "玉蝠铋耱忸: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/脏殡/_青镨"
+msgid "License agreement"
+msgstr "髓鲥礴桀礤 漕泐忸"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "谚耱屐龛 铒鲨"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/脏殡/_悟忸痂"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "填, 桤徨疱蝈 龛忸 磬 耔泱痦铖"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/脏殡/_皖"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "项赅玮 襦祛 玎 桤狃囗 溴"
+msgid ", USB printer"
+msgstr ", USB 镳桧蝈"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "泥 耔祗腓疣 腓 蝠弪 狍蝾 ?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "如徨疱蝈 镳桦铈屙蜞 觐栩  镱滗驵 梏蝾忮蝈:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "填, 桤徨疱蝈 蜩 磬 扈囹."
+msgid "Configure X"
+msgstr "袜耱痤殛 磬 "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "砚玮 %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "殷瘃赅 (蝠噤桷桀礤 \"F\" 祛溴)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "朽珀圜忄 %s"
+msgid "Congratulations!"
+msgstr "项玟疣怆屙 !"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Use owner id for execution"
+msgstr "如镱腌忄 id 磬 耦狁蜮屙桕 镳 桤嵇腠屙桢"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "镱塍麇龛"
+msgid "Down"
+msgstr "念塍"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "镳艴恸痣屙"
+msgid "Raw printer (No driver)"
+msgstr "'Raw' 镳桧蝈 (铃 漯嚅忮)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "镱塍麇眍: "
+msgid "Install rpm"
+msgstr "软耱嚯桊 rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "桤镳帙: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"青 溧 桤镥鬣蜞蝈 羿殡 铗 觐爨礓龛 疱 (蝈痨桧嚯屙 镳铉铕弼), 祛驽蝈 桦 溧 "
+"桤镱腌忄蝈 觐爨礓囹 \"%s <file>\" 桦 沭圄梓龛 镥鬣蜞 桧耱痼戾眚: \"xpp "
+"<file>\" 桦 \"kprinter <file>\". 灭圄梓龛蝈 桧耱痼戾眚 忤 镱玮铍忄 溧 "
+"桤徼疣蝈 镳桧蝈疣 溧 镱镳噔蝈 脲耥 磬耱痤殛栩 磬 铒鲨栩.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "祟赅腠 桤戾疴囗"
+msgid "Time remaining "
+msgstr "务蜞忄 怵屐 "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "耩邃眍"
+msgid "UK keyboard"
+msgstr "U 觌噔栲蝮疣"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "暑眙桡箴圉 磬 鲡"
+msgid "Unmount"
+msgstr "腻祛眚桊嚅"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"吗赅蜞 镳铒噤磬.\n"
-"橡钼屦弪 耔 觐眙桡箴圉蜞 暑眚痤脲 鲥眚 磬 Mandrake."
+msgid "Uninstall Fonts"
+msgstr "软耱嚯桊 梏蝾忮"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "吗赅蜞 篑蜞眍忮磬."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "朽珀圜忄礤蝾 铗 软蝈痦弪 玎恸瘌桦"
+msgid "German (no dead keys)"
+msgstr "湾祚赅 (徨 礤疣犷蝈 觌噔桫)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "朽珀圜忄礤蝾 铗 软蝈痦弪 礤篑镥"
+msgid "Transferring %s..."
+msgstr "橡艴恸痣礤 磬 %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "砚玮囔 皴 犏 软蝈痦弪"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 蹊滂 鲡蜞 (15 徼蜞)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "朽珀圜忄 铗 软蝈痦弪 "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"妈 祛驽 溧 尻耧铕蜩疣蝈 赅蝾 桤镱腌忄蝈 NFS 桦 Samba. 填, 桤徨疱蝈 赅赈 "
+"桉赅蝈 溧 桤镱腌忄蝈."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "项鬣赅轵, 镳钺忄 忄蜞 怵赅..."
+msgid "Reboot"
+msgstr "橡羼蜞痱桊"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr ""
+msgid "Gambia"
+msgstr "绵灬"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "吗屐 磬 怵赅蜞: "
+msgid "Mandrake Control Center"
+msgstr "暑眚痤脲 鲥眚 磬 Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "殃铕铖 磬 镱塍鬣忄礤:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"妈 祛驽 溧 恸忮溴蝈 漯筱 镱痱钼. \n"
+"锣腓漤 襦 磬镳桁屦: 139/tcp 139/udp.\n"
+"项汶邃礤蝈 /etc/services 玎 桧纛痨圉"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "殃铕铖 磬 桤镳帙囗:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "羊囹桉蜩觇"
+msgid "\t-Tape \n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "橡铘桦 "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "填龛蝾痂磴 磬 祓彐囹"
+msgid "Remember this password"
+msgstr "青镱祉 蜞玷 镟痤豚"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "祟赅脲 镳桧蝈"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "扬钿咫礤蝾 磬 软蝈痦弪 祛戾眚 怅膻麇眍."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
+" 狸 驽豚龛 镳桧蝈 铗牮栩 噔蝾爨蜩黜, 镳铖蝾 桤徨疱蝈 泐 铗 耧桉 "
+"蝾汔忄 漕徉忮蝈 桁 磬 镱蝠遽栩咫, 镟痤豚, /桦 疣犷蝽 沭箫 嚓 "
+"礤钺躅滂祛."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "如徨疱蝈 沭圄梓磬 赅痱"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "如镱腌忄 疋钺钿眍蝾 耱 磬 Windows 豚"
#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "填, 镳钺忄轵 扈囹 耔"
+#, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s 磬戾疱眍 磬 %s, 溧 觐眙桡箴桊囔 噔蝾爨蜩黜?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "祟赅脲 镳桧蝈"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(磬 蜞玷 爨磬)"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "如蝠桠囗 磬 铒帏赅蜞"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "玎皴麇磬 %s"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "念徉忤 镱蝠遽栩咫"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 漯嚅忮: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
+"翌玷 噤疱/躅耱 忮麇 耧桉, 蝾 礤 祛驽 溧 狷溴 漕徉忮 铗眍忸.\n"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "如镱腌忄 疋钺钿眍蝾 耱"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(磬 蜞玷 爨磬)"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
+"\n"
+" DrakBackup 朽镱痱 \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Choose the packages you want to install"
+msgstr "如徨疱蝈 镟赍蜩蝈, 觐栩 桉赅蝈 溧 桧耱嚯桊囹"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "项溴礤 磬 羿殡钼"
+msgid "Papua New Guinea"
+msgstr "相矬 皖忄 免桧"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Serbian (cyrillic)"
+msgstr "佯耜 (觇痂腓鲟)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"锐赅蝈 腓 溧 磬耱痤栩 蝾玷 镳桧蝈 (\"%s\")\n"
+"赅蝾 镳桧蝈 镱 镱漯噻徼疣礤 ?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "祟赅脲 镳桧蝈"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "祟赅脲 镳桧蝈"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "项溴礤 磬 羿殡钼"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "祟赅脲 镳桧蝈"
+msgid "Creating bootdisk..."
+msgstr "漾玟噔囗 磬 耱囵蜩疣 滂耜弪..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
+msgid "Wait please, testing your connection..."
+msgstr "项鬣赅轵, 镳钺忄 忄蜞 怵赅..."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "爨蝈 祓彐钼 噤囡蝈!"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing down the network"
+msgstr "如觌忄礤 磬 祓彐囹"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "爨蝈 祓彐钼 噤囡蝈!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "项蝠遽栩咫耜 桁"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS 镱矬疱 镳铗铌铍 玎 钺戾 磬 羿殡钼 镱 TCP/IP 祓彐.\n"
+"亦玷 篑塍汔 铖桡箴忄 趔黻鲨铐嚯眍耱蜞 磬 玎觌忄礤蝾 磬 NFS 羿殡钼弪."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "choose device"
-msgstr "桤徼疣 篑蝠铋耱忸"
+msgid "DHCP Client"
+msgstr "DHCP 觌桢眚"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "祟赅脲 镳桧蝈"
+msgid "dismiss"
+msgstr "铖蜞忤"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "如镱腌忄 噔蝾爨蜩黜 玎耔鬣礤"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "襄鬣蜞/殃囗桊囗邋 磬 \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "徨 raid 祛潴腓"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd 溴祛磬 玎 镥鬣 礤钺躅滂 磬 lpr 溧 疣犷蜩 眍痨嚯眍. 翌 镳铖蝾 錦n"
+"聱疴, 觐轵 铒疱溴 疣犷蜩蝈 玎 镥鬣 磬 镳桧蝈(/栩)."
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s 礤 皴 镱潸疰"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "袜耱痤殛 磬 软蝈痦弪 怵赅"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s 礤 皴 镱潸疰 铗 蜞玷 忮瘃 磬 Mandrake Linux."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "项痱"
+msgid "comma separated numbers"
+msgstr "眍戾疣 疣玟咫屙 聱 玎镥蜞"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", "
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "玎皴麇磬 %s"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " ("
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "如徨疱蝈 沭圄梓磬 赅痱"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "爨蝈 祓彐钼 噤囡蝈!"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s 礤 徉玎蜞 溧眄 磬 耜屙屦, 溧 觐眙桡箴桊囔 瘊黜?"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "袜桉蜩磬 腓 桉赅蝈 溧 镳屐圊礤蝈 镳桧蝈疣 \"%s\" ?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s 磬戾疱眍 磬 %s, 溧 觐眙桡箴桊囔 噔蝾爨蜩黜?"
+msgid "I can't find any room for installing"
+msgstr "湾 祛汔 溧 磬戾 龛赅赈 耱 玎 桧耱嚯圉"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware probing in progress"
-msgstr "橡钽疱 磬 踵痄箦痦 镳钺"
+msgid "Default printer"
+msgstr "橡桧蝈 镱 镱漯噻徼疣礤"
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
+"袜耱痤桦 耱 觐腙 磬麒磬 玎 怵赅 犏 软蝈痦弪.\n"
+"如徨疱蝈 蝾玷, 觐轵 桉赅蝈 溧 桤镱腌忄蝈.\n"
+"\n"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "填滂翳鲨疣 RAID"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"悟牮栩 ISDN PCI 赅痱, 眍 礤镱珥囹 蜩. 填 桤徨疱蝈 觐 PCI 赅痱 "
+"铗 耠邃忄 尻疣."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "念狃 漕 疋弪 磬 悟忸疱龛 如躅溴 觐"
+msgid "Add user"
+msgstr "念徉忤 镱蝠遽栩咫"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "岭嚆钿囵桁 忤, 麇 桤狃圊蝈 Mandrake Linux 9.1"
+msgid "RAID-disks %s\n"
+msgstr "RAID-滂耜钼 %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Liberia"
+msgstr "髓徨痂"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-"枢赈 桉赅蝈 溧 珥噱蝈 镱忮麇 玎 钺铖蝌 磬 悟忸疱龛 桤躅溴 觐? 码彗蝈 "
-" 疋弪 磬 砚钺钿龛 杨趄箦"
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "如犷 磬 觌噔栲蝮疣"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 忤 镲铉忸忄 溧 镱塍麒蝈 磬-镱耠邃龛蝈 忮瘃梃 磬 "
-"耦趄箦疣, 溧 耠篪囹 祗玷赅腠 羿殡钼, 溧 钺疣犷蜮囹 纛蝾 沭圄梓龛 "
-"羿殡钼, 赅牝 溧 汶邃囹 忤溴."
+msgid "Format partitions"
+msgstr "灶痨囹桊囗 磬 腩忮"
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Automatic correction of CUPS configuration"
+msgstr "棱蝾爨蜩黜 觐疱牿 磬 CUPS 觐眙桡箴圉"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Running \"%s\" ..."
+msgstr "如嵇腠忄 \"%s\" ..."
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "enable radio support"
+msgstr "疣琊屮噔 镱漯赅 磬 疣滂"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "暑眙桡箴圉 磬 义痨桧嚯屙 漾疴 Mandrake "
+msgid "Scanner sharing to hosts: "
+msgstr "项溴礤 磬 羿殡钼"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback file name: %s"
+msgstr "褥 磬 loopback 羿殡: %s"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1 忤 镳邃铖蜞 11 镱蝠遽栩咫耜 桧蝈痿彘襦 觐栩 祛汔 溧 "
-"狷溧 磬嵇腠 祛滂翳鲨疣龛: KDE 3, Gnome 2, WindowMaker, ..."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "填, 桤徨疱蝈 皴痂屙 镱痱 犏 觐轵 疋玎 祛溴禚 忤."
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "湾 镳艴恸痣 镳桧蝈痂"
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "青徉礤 镳邃 耱囵蜩疣礤蝾 磬 镱漯噻徼疣 钺疣"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "填, 鳅觏弪 磬 眍耔蝈"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 礤镳尻磬蝾 疣琊噌铗忄 皴 镫囹纛痨"
+msgid "user"
+msgstr "项蝠遽栩咫"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Hard Disk to backup"
+msgstr "如镱腌忄 蜮 滂耜 玎 疱珏疴眍 觐镨"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, c-format
+msgid "Configure"
+msgstr "袜耱痤赅"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "如徨疱蝈 沭圄梓磬 赅痱"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"橡邂瘊 忄蜞 爨磬 祛 Linux 聱疴 觐腙 鳅赈囗 磬 扈囹: "
-"Web 聱疴, 镱, firewall, router, 羿殡钼 镳桧 聱疴, ..."
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "橡邂礤蝈 忄蜞 爨磬 磬溴驿屙 聱疴"
+msgid "Backup Users"
+msgstr "绣珏疴眍 觐镨 磬 镱蝠遽栩咫"
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"袜蝈 嵇腠 疱龛, 赅牝 耧弼栲腠 镳邃腩驽龛 磬 镳钿箨蜩 漯筱 "
-"\"豚觐祚蜮郳" 襦 漕耱龛 磬 'e-桤蝾黜桕':"
+"填, 恸忮溴蝈 host name 玎 爨磬蜞.\n"
+"Host 桁弪 蝠徕 溧 狍溴 磬嵇腠 赈嚯梏桷桊囗 桁,\n"
+"赅蝾 ``mybox.mylab.myco.com''.\n"
+"填驽蝈 聱 溧 恸忮溴蝈 IP 噤疱襦 磬 锣 gateway, 嚓 桁囹 蜞犏"
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "昔桷栲腠 桤蝾黜桕 磬 MandrakeSoft "
+msgid "Select Printer Spooler"
+msgstr "如徨疱蝈 镳桧蝈疱 spooler"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+msgid "Create new theme"
+msgstr "漾玟噔 眍忄 蝈爨"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "祟赅脲 镳桧蝈"
+
+#: ../../install_steps.pm:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"觐 忄骓 镟赍蜩 礤 皴 桧耱嚯桊圊 赅牝 蝠徕.\n"
+"入 CDROM 篑蝠铋耱忸蝾 忤 桦 觐祜嚓 滂耜 忤 溴翦牝屙.\n"
+"橡钼屦弪 觐祜嚓 滂耜 磬 桧耱嚯桊囗 觐祜 桤镱腌忄殛 \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "玎皴麇磬 %s"
+
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "物蜩扈玷疣 忄蜞 耔泱痦铖"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "翌玷 镳钿箨 漕耱屙 铗 web 襦轵 磬 MandrakeStore"
+msgid "Azerbaijan"
+msgstr "犁屦徉殇驵"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "拟铕嚓 (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
+"蝾忄 翳玷麇耜囹 磬 磬 觐轵 玎赅麇眍 篑蝠铖蜮铗 (磬镳: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "磬戾疱蝈 疱龛 磬 忄蝈 镳钺脲扈 镱漯赅蜞 磬 MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "枢 疋玎 镳桧蝈瘊 ?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "羊囗弪 MandrakeExpert"
+msgid "Security level"
+msgstr "丸忸 磬 耔泱痦铖"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "朽玟咫栩咫磬 耧铖钺眍耱"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "玉塍汨"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert 钺邃桧忄"
+msgid "4 MB"
+msgstr "4 塘"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -18067,10 +18141,6 @@ msgstr ""
"镳邈脲 磬 PDF, .."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "朽犷蝽 耱囗鲨"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "茹疣腠 耱囗鲨"
@@ -18143,10 +18213,6 @@ msgstr ""
"桧耱痼戾眚"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "灭圄梓磬 耩邃"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome 疣犷蝽 耱囗鲨"
@@ -18166,10 +18232,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm .."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "朽琊噌铗赅"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "凌犭桀蝈觇 玎 疣琊噌铗赅 磬 C C++, 镳钽疣扈 include 羿殡钼"
@@ -18241,40 +18303,94 @@ msgstr "NFS 聱疴, SMB 聱疴, Proxy 聱疴, SSH 聱疴"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "腆蜩戾滂轫 耱囗鲨"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"袜犷 铗 桧耱痼戾眚 玎 麇蝈礤 桤镳帙囗 磬 镱 眍忤龛 (pine, mutt, "
+"tin..) 玎 钺桕嚯礤 桤 甜彐囹"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "软蝈痦弪 怵赅 磬耱痤殛"
+
+#~ msgid "Configure the connection"
+#~ msgstr "暑眙桡箴桊囗 磬 怵赅蜞"
+
+#~ msgid "Disconnect"
+#~ msgstr "悟恸疰"
+
+#~ msgid "Connect"
+#~ msgstr "砚骅"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "填驽蝈 溧 镳屙囫蝠铊蝈 怵赅蜞."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "填驽蝈 溧 皴 疋驽蝈 犏 软蝈痦弪 桦 溧 镳屙囫蝠铊蝈 怵赅蜞."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr " 祛戾眚 礤 耱 疋玎龛 犏 软蝈痦弪"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "填驽蝈 溧 皴 铗恸疰弪 桦 溧 镳屙囫蝠铊蝈 怵赅蜞."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr " 祛戾眚 耱 疋玎龛 犏 软蝈痦弪"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "羿殡钼 桤镳囹屙 镱 FTP"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "橡羼蜞痱桊 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "橡噔 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "翔 %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "暑镨疣 %s %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "绣珏疴眍 觐镨 %s %s.old"
+
+#~ msgid "Author:"
+#~ msgstr "棱蝾:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "橡钽疣扈 玎 矬耜囗/镱镳噔礤 磬 玮箨 忤溴"
+#~ msgid "Audio station"
+#~ msgstr "腆蜩戾滂轫 耱囗鲨"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "茹疣腠 耱囗鲨"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "橡钽疣扈 玎 矬耜囗/镱镳噔礤 磬 玮箨 忤溴"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "橡钽疣扈 玎 矬耜囗/镱镳噔礤 磬 玮箨 忤溴"
+#~ msgid "Video station"
+#~ msgstr "茹疣腠 耱囗鲨"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "茹疣腠 耱囗鲨"
+#~ msgid "Video playing programs"
+#~ msgstr "橡钽疣扈 玎 矬耜囗/镱镳噔礤 磬 玮箨 忤溴"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "灭圄梓龛 镳钽疣扈 赅蝾 The Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "茹疣腠 耱囗鲨"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"袜犷 铗 桧耱痼戾眚 玎 麇蝈礤 桤镳帙囗 磬 镱 眍忤龛 (pine, mutt, "
-"tin..) 玎 钺桕嚯礤 桤 甜彐囹"
+#~ msgid "Graphics programs"
+#~ msgstr "灭圄梓龛 镳钽疣扈 赅蝾 The Gimp"
#~ msgid "Printer sharing"
#~ msgstr "项溴礤 磬 镳桧蝈"
@@ -18731,7 +18847,7 @@ msgstr ""
#~ "\n"
#~ "Please choose your preferred language for installation and system usage.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation. Selecting other languages\n"
#~ "will install the language-specific files for system documentation and\n"
#~ "applications. For example, if you host users from Spain on your machine,\n"
@@ -19133,8 +19249,7 @@ msgstr ""
#~ "Click on \"Cancel\" if you want to choose another partition for your new\n"
#~ "Mandrake Linux operating system installation.\n"
#~ "\n"
-#~ "Click on \"Advanced\" if you wish to select partitions that will be "
-#~ "checked\n"
+#~ "Click on \"%s\" if you wish to select partitions that will be checked\n"
#~ "for bad blocks on the disk."
#~ msgstr ""
#~ "埋梓觇 眍忸溴翳龛疣龛 腩忮 蝠徕 溧 狷溧 纛痨囹桊囗, 玎 溧 皴 "
@@ -19175,7 +19290,7 @@ msgstr ""
#~ "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
#~ "soon as the computer has booted up again.\n"
#~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
@@ -19962,8 +20077,7 @@ msgstr ""
#~ "are\n"
#~ "finish adding all the users you want, select \"Done\".\n"
#~ "\n"
-#~ "Clicking the \"Advanced\" button allows you to change the default \"shell"
-#~ "\"\n"
+#~ "Clicking the \"%s\" button allows you to change the default \"shell\"\n"
#~ "for that user (bash by default).\n"
#~ "\n"
#~ "When you are finished adding all users, you will be proposed to choose a\n"
@@ -20018,9 +20132,6 @@ msgstr ""
#~ "镱漯噻徼疣礤 磬\n"
#~ "镱蝠遽栩咫 (bash 镱 镱漯噻徼疣礤)."
-#~ msgid "Upgrade"
-#~ msgstr "吾眍忄礤"
-
#~ msgid "Palestina"
#~ msgstr "相脲耱桧"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
index 75641c37f..1ebb62863 100644
--- a/perl-install/share/po/bs.po
+++ b/perl-install/share/po/bs.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-15 18:00--800\n"
"Last-Translator: Vedran Ljubovi膰 <vljubovic@smartnet.ba>\n"
"Language-Team: Bosnian <lokal-subscribe@lugbih.org>\n"
@@ -13,960 +13,1810 @@ msgstr ""
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Pretra啪ujem particije da na膽em ta膷ke montiranja"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tObri拧i=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port mre啪nog 拧tampa膷a"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Molimo ubacite disketu:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
-"Mo啪ete dodavati korisnike u ovu grupu pomo膰u userdrake-a."
+"Backup tabela particija nema istu veli膷inu\n"
+"Ipak nastavljate?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Odustani"
+msgid "Which username"
+msgstr "Koje korisni膷ko ime"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Koju vrstu opcije 啪elite dodati?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Vrati tabelu particija"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Na CUPS serveru \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Post-instalacijsko pode拧avanje"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Koristi ``%s'' umjesto toga"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tip"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"沤elite li dozvoliti korisnicima da dijele (share) neke od njihovih "
-"direktorija?\n"
-"Ako uklju膷ite ovu opciju, korisnici 膰e mo膰i jednostavno kliknuti na opciju "
-"\"Share\" u\n"
-"Konqueroru ili Nautilusu.\n"
"\n"
-"\"Prilago膽eno\" vam omogu膰uje da podesite ovu opciju zasebno za svakog "
-"korisnika.\n"
+"Tako膽er 拧tampa膷i konfigurisani sa PPD datotekama koje su osigurali njihovi "
+"proizvo膽a膷i ili sa vlastitim CUPS drajverima ne mogu biti preba膷eni."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nedostaje obavezan paket %s"
+msgid "Sri Lanka"
+msgstr "艩ri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Mo啪ete eksportovati koriste膰i NFS ili Sambu. Molim izaberite koji 啪elite "
-"koristiti."
+"Sljede膰i 拧tampa膷\n"
+"\n"
+"%s%s\n"
+"su direktno spojeni na va拧 sistem"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba biti instaliran. Da li ga 啪elite instalirati?"
+msgid "Central African Republic"
+msgstr "Centralnoafri膷ka Republika"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Ru膷no izaberi"
+msgid "Gateway device"
+msgstr "Gateway ure膽aj"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
+msgid "Net Method:"
+msgstr "Net Method:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Bez dijeljenja"
+msgid "Ethernetcard"
+msgstr "Ethernet kartica"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Jo拧"
+msgid "Parameters"
+msgstr "Parametri"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ovdje je puna lista svih dostupnih dr啪ava"
+msgid "Auto-detect"
+msgstr "Auto prepoznavanje"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Molim izaberite va拧u zemlju."
+msgid "Interface:"
+msgstr "Interfejs:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Izaberite klasu instalacije"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Zemlja"
+msgid "on CDROM"
+msgstr "na CDROMu"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Svi jezici"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Izgleda da sistem nije spojen na Internet.\n"
+"Probajte promijeniti postavke va拧e konekcije."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Podrazumijeva se Unicode"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Povezati 拧tampa膷 na Linux server i dopustiti Windows ra膷unarima da se "
+"spajaju na njega kao klijenti.\n"
+"\n"
+"Da li zaista 啪elite nastaviti sa pode拧avanjem 拧tampa膷a kako ste zapo膷eli?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bjelorusija"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Gre拧ka u pisanju datoteke: %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux podr啪ava vi拧e jezika. Izaberite jezike koje\n"
-"啪elite instalirati. Oni 膰e biti dostupni kada se zavr拧i va拧a\n"
-"instalacija i restartujete va拧 sistem."
+"Apmd se koristi za nadgledanje statusa baterija i njegovo bilje啪enje preko\n"
+"sysloga. Tako膽e se mo啪e koristiti za ga拧enje ra膷unara kada su baterije pri "
+"kraju."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Molimo izaberite jezik koji 膰ete koristiti."
+msgid "Use tape to backup"
+msgstr "Koristi traku za backup"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji 膰e se pokretati:"
+msgid "The following packages are going to be installed"
+msgstr "Sljede膰i paketi 膰e biti instalirani"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
+msgid "CUPS configuration"
+msgstr "Pode拧avanje CUPSa"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Da li 啪elite koristiti ovu mogu膰nost?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mogu podesiti va拧 ra膷unar da automatski prijavi jednog korisnika."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Autologin"
+msgid "Moving"
+msgstr "Premje拧tam"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Ikona"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup aktivnosti putem %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "艩ifra (ponovo)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Dobro do拧li u 膶arobnjak za pode拧avanje mre啪e\n"
+"\n"
+"Sada 膰emo podesiti va拧u internet/mre啪nu konekciju.\n"
+"Ako ne 啪elite da koristite automatsko prepoznavanje, isklju膷ite opciju.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "艩ifra"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Korisni膷ko ime"
+msgid "Lebanon"
+msgstr "Liban"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Pravo ime"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Prihvati korisnika"
+msgid "Stop"
+msgstr "Stop"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Gotovo"
+msgid "Edit selected host"
+msgstr "Izmijeni izabrani ra膷unar"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No CD device defined!"
+msgstr "Nije definisan CD ure膽aj!"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Bugarska (fonetska)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "Po膷etna DHCP adresa"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Glavne opcije bootloadera"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Unesite korisnika\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Dodaj korisnika"
+msgid "Tape"
+msgstr "Traka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Ovo korisni膷ko ime je ve膰 dodano"
+msgid "Scanning network..."
+msgstr "Pretra啪ujem mre啪u..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Korisni膷ko ime je preduga膷ko"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Sa ovom opcijom bi膰ete u mogu膰nosti da vratite bilo koju\n"
+" verziju va拧eg /etc direktorija."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisni膷ko ime smije sadr啪ati samo mala slova, brojeve, `-' i `_'"
+msgid "Malaysia"
+msgstr "Malezija"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Molimo navedite korisni膷ko ime"
+msgid "Swiss (French layout)"
+msgstr "艩vicarska (francuski izgled)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Ova 拧ifra je previ拧e jednostavna"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid nije uspio (mo啪da nedostaju raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Web kamera"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Veli膷ina CPU ke拧a (drugog nivoa)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "Zvu膷na kartica"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Za 拧tampanje datoteke sa komandne linije (terminalski prozor) koristite "
+"komandu \"%s <datoteka>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Molimo poku拧ajte ponovo"
+msgid "Level %s\n"
+msgstr "Nivo %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "艩ifre se ne poklapaju"
+msgid "Luxembourg"
+msgstr "Luksemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(ve膰 dodan %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Izvje拧taj o demonima\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "pristup alatima za kompajliranje"
+msgid "Iran"
+msgstr "Iran"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "pristup mre啪nim alatima"
+msgid "Bus"
+msgstr "Sabirnica"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "pristup administrativnim datotekama"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"Potencijalan konflikt LAN adresa prona膽en u trenutnoj konfiguraciji %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
+msgid "Configuring..."
+msgstr "Pode拧avam..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "pristup X programima"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Pode拧avanje je ve膰 zavr拧eno i trenutno je uklju膷eno."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Ovo su trenutne opcije u va拧em boot meniju.\n"
-"Mo啪ete dodati nove ili promijeniti postoje膰e."
+"Za ve膰inu modernih TV kartica, bttv modul Linux kernela automatski "
+"prepoznaje odgovaraju膰e parametre.\n"
+"Ako je va拧a kartica pogre拧no prepoznata, ovdje mo啪ete prisiliti odgovaraju膰i "
+"tip tunera i kartice. Samo izaberite parametre va拧e TV karte."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Ostali OSi (Windows...)"
+msgid "Password (again)"
+msgstr "艩ifra (ponovo)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
+msgid "Search installed fonts"
+msgstr "Pretra啪i instalirane fontove"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
+msgid "Venezuela"
+msgstr "Venecuela"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP adresa"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu opcije 啪elite dodati?"
+msgid "Choose the sizes"
+msgstr "Izaberite veli膷ine"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Ova oznaka je ve膰 u upotrebi"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Lista o拧te膰enih podataka:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Morate navesti root particiju"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Va拧 modem nije podr啪an pod ovim sistemom.\n"
+"Pogledajte http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Morate navesti image kernela"
+msgid "Choose another partition"
+msgstr "Izaberi drugu particiju"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
+msgid "Current user"
+msgstr "Trenutni korisnik"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "Default"
+msgid "Username"
+msgstr "Korisni膷ko ime"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "Left \"Windows\" key"
+msgstr "Lijeva \"Windows\" tipka"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-veli膷ina"
+msgid "dhcpd Server Configuration"
+msgstr "Pode拧avanje dhcpd servera"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Append"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Koristi se za direktorij:\n"
+" samo vlasnik tog direktorija ili datoteke u ovom direktoriju ga mo啪e "
+"obrisati"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "Oznaka"
+msgid "Guyana"
+msgstr "Gvajana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Nesigurno"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "na Novell serveru \"%s\", 拧tampa膷 \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Tabela"
+msgid "Remove a module"
+msgstr "Ukloni modul"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "艩ifra"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr "Napredno pode拧avanje"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr "Skeniram pomo膰u HP multifunkcijskog ure膽aja"
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "膶itaj-pi拧i"
+msgid "Choose an existing RAID to add to"
+msgstr "Izaberite postoje膰i RAID na koji 膰ete dodati"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turska (moderni \"Q\" model)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "Video mod"
+msgid "Lilo message not found"
+msgstr "Nisam prona拧ao Lilo poruku."
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "Image"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Default OS?"
-msgstr "Podrazumjevani OS?"
+msgid "if needed"
+msgstr "ako je potrebno"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Omogu膰i boot sa OFa?"
+msgid "Restore Failed..."
+msgstr "Vra膰anje nije uspjelo..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Omogu膰i boot sa CDa?"
+msgid "/Autodetect _jazz drives"
+msgstr "/Automatski prepoznaj _jazz ure膽aje"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backup will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme za boot kernela"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Budu膰i da prevodilac ovog teksta nije u mogu膰nosti da osigura pravnu\n"
+"provjeru prevedenog teksta, tekst licence je ostavljen u originalnom "
+"(engleskom)\n"
+"obliku.\n"
+"\n"
+"\n"
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "膶ekanje na Open Firmware"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"koordinate progresne trake x\n"
+"tj. njenog lijevog ugla"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Boot device"
-msgstr "Boot ure膽aj"
+msgid "Current interface configuration"
+msgstr "Postavke trenutnog interfejsa"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Init poruka"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader koji 膰ete koristiti"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ako imate ISA karticu, vrijednosti na idu膰em ekranu bi trebale biti "
+"ispravne.\n"
+"\n"
+"Ako imate PCMCIA karticu, mora膰ete znati IRQ i IO va拧e kartice.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
+msgid "Do not print any test page"
+msgstr "Nemoj 拧tampati testnu stranicu"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograni膷i opcije komandne linije'' je beskorisna bez 拧ifre"
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Navedite veli膷inu rama u MB"
+msgid "Force No APIC"
+msgstr "Prinudi bez APICa"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Omogu膰i vi拧e profila"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Ova 拧ifra je previ拧e jednostavna (mora biti duga najmanje %d karaktera)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veli膷ina RAMa ako je potrebno (prona膽eno %d MB)"
+msgid "[keyboard]"
+msgstr "[tastatura]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "O膷isti /tmp prilikom svakog boota"
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Napravite boot disketu"
+msgid "Install List"
+msgstr "Lista instalacije"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "restrict"
-msgstr "ograni膷i"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Promijeni\n"
+"stazu vra膰anja"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Ograni膷i opcije komandne linije"
+msgid "Show only for the selected day"
+msgstr "Prika啪i samo za izabrani dan"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Force No APIC"
-msgstr "Prinudi bez APICa"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Uklju膷i ACPI"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "膶ekanje prije bootanja default image-a"
+msgid "Logs"
+msgstr "Dnevnici"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "compact"
-msgstr "kompaktno"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Napomena: Paralelni portovi ne mogu biti automatski istra啪eni)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "Kompaktno"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instalacija bootloadera"
+msgid "What kind of card do you have?"
+msgstr "Koju vrstu kartice imate?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
+msgid "Security"
+msgstr "Sigurnost"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje 啪elite smjestiti bootloader?"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Mo啪ete tako膽er koristiti grafi膷ki interfejs \"xpdq\" za pode拧avanje opcija i "
+"upravljanje zadacima 拧tampe.\n"
+"Ako koristite KDE okru啪enje radne povr拧ine imate \"dugme za paniku\". To je "
+"ikona na radnoj povr拧ini 膷iji je naziv \"ZAUSTAVI 拧tampa膷!\", koja "
+"zaustavlja sve zadatke 拧tampe odmah kada kliknete na nju. Ovo je korisno "
+"npr. u slu膷aju zaglavljivanja papira.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO instalacija"
+msgid "Unknown"
+msgstr "Nepoznat"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Skip"
-msgstr "Presko膷i"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Ovaj server je ve膰 na listi, ne mo啪ete ga ponovo dodati.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Na disketi"
+msgid "Network Configuration"
+msgstr "Pode拧avanje mre啪e"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Prvi sektor root particije"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Odlu膷ili ste da na particiju instalirate bootloader.\n"
-"Ovo podrazumijeva da ve膰 imate bootloader na hard disku sa kojeg bootate "
-"(npr: System Commander).\n"
-"\n"
-"Sa kojeg diska vr拧ite boot?"
+"Protokol za ostatak svijeta \n"
+" bez D-kanala (iznajmljene linije)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Pravim boot disketu..."
+msgid "Option %s must be a number!"
+msgstr "Opcija %s mora biti broj!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u %s"
+msgid "Notice"
+msgstr "Napomena"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Izaberite disketnu jedinicu koju 啪elite koristiti da napravite boot disketu"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Druga disketna jedinica"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Prva disketna jedinica"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Niste podesili X. Sigurno 啪elite uraditi ovo?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "沤ao mi je, nema disketne jedinice"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Pode拧avanje 拧tampa膷a 膰e raditi potpuno automatski. Ako va拧 拧tampa膷 nije "
+"ispravno prepoznat ili ako 啪elite sami podesiti 拧tampa膷, uklju膷ite \"Ru膷no "
+"pode拧avanje\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Koju vrstu particioniranja?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Vlastita boot disketa vam omogu膰uje da pokrenete Linux pri 膷emu ne ovisite\n"
-"od bootloader programa. Ovo je korisno ako ne 啪elite instalirati LILO (ili "
-"grub) na\n"
-"va拧 sistem, ako neki drugi operativni sistem uklanja LILO ili ako LILO ne "
-"radi\n"
-"na va拧oj trenutnoj konfiguraciji. Vlastiti bootdisk se mo啪e tako膽e koristiti "
-"sa\n"
-"Mandrake rescue image, pri 膷emu je mnogo lak拧e ispraviti neke ozbiljne\n"
-"sistemske kvarove. 沤elite li napraviti boot disketu za va拧 sistem?\n"
-"%s"
+"lista datoteka poslana putem FTPa: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Interfejs"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"options description:\n"
+"\n"
+" - Backup system files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User files: \n"
+"\n"
+"\tThis option allows you select all users that you want \n"
+"\tto backup.\n"
+"\tTo preserve disk space, it is recommended that you \n"
+"\tdo not include the web browser's cache.\n"
+"\n"
+" - Backup Other files: \n"
+"\n"
+"\tThis option allows you to add more data to save.\n"
+"\tWith the other backup it's not possible at the \n"
+"\tmoment to select incremental backup.\t\t\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful \n"
+"\toption for backup. This option allows you \n"
+"\tto backup all your data the first time, and \n"
+"\tonly the changed data afterward.\n"
+"\tThen you will be able, during the restore\n"
+"\tstep, to restore your data from a specified\n"
+"\tdate.\n"
+"\tIf you have not selected this option all\n"
+"\told backups are deleted before each backup. \n"
"\n"
"\n"
-"(PA沤NJA! Vi koristite XFS za va拧u root particiju,\n"
-"pravljenje boot diskete na 1.44 Mb disketi vjerovatno ne膰e\n"
-"raditi, po拧to XFS tra啪i veoma velik drajver)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Vlastita boot disketa vam omogu膰uje da pokrenete Linux pri 膷emu ne ovisite\n"
-"od bootloader programa. Ovo je korisno ako ne 啪elite instalirati SILO na\n"
-"va拧 sistem, ako neki drugi operativni sistem uklanja SILO ili ako SILO ne "
-"radi\n"
-"na va拧oj trenutnoj konfiguraciji. Vlastiti bootdisk se mo啪e tako膽e koristiti "
-"sa\n"
-"Mandrake rescue image, pri 膷emu je mnogo lak拧e ispraviti neke ozbiljne\n"
-"sistemske kvarove.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Ako 啪elite napraviti boot disketu za va拧 sistem, stavite neku disketu u "
-"va拧u\n"
-"prvu jedinicu i pritisnite \"U redu\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne mo啪ete instalirati bootloader na %s particiju\n"
+msgid "comma separated strings"
+msgstr "tekst razdvojen zarezima"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Ovo su ra膷unari sa koji treba koristiti skenere:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljene stavke 膰e biti bootane automatski za %d sekundi."
+msgid "Messages"
+msgstr "Poruke"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "opcija prije bootanja, ili 'c' za komandnu liniju."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Nepoznat|CPH06X (bt878) [razni proizvo膽a膷i]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
+msgid "POP and IMAP Server"
+msgstr "POP i IMAP server"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristite tipke %c i %c za izbor jedne od opcija."
+msgid "Mexico"
+msgstr "Meksiko"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro do拧li u GRUB izbornik operativnog sistema!"
+msgid "Model stepping"
+msgstr "Model stepping"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Imate li ijedan %s interfejs?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
+msgid "Switzerland"
+msgstr "艩vicarska"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafi膷kim menijem"
+msgid "Brunei Darussalam"
+msgstr "Bruneji"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Opcije udaljenog lpd 拧tampa膷a"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Dobro do拧li u %s izbornik operativnog sistema!\n"
+"GNU/Linux je vi拧ekorisni膷ki sistem, 拧to zna膷i da svaki korisnik mo啪e imati\n"
+"vlastite preference, vlastite datoteke i tako dalje. Mo啪ete pro膷itati "
+"''Po膷etni膷ki\n"
+"vodi膷'' da biste saznali vi拧e o vi拧ekorisni膷kim sistemima. Ali za razliku "
+"od\n"
+"\"root\"-a, koji je administrator sistema, korisnicima koje dodate u ovom "
+"trenutku\n"
+"ne膰e biti dozvoljeno da promijene ni拧ta osim vlastitih datoteka i vlastite\n"
+"konfiguracije, 膷ime je sistem za拧ti膰en od nenamjernih ili zlonamjernih "
+"izmjena\n"
+"koje mogu uticati na cijeli sistem. Mora膰ete kreirati najmanje jednog "
+"korisnika\n"
+"za vas same -- ovo je ra膷un koji trebate koristiti za rutinsku, svakodnevnu\n"
+"upotrebu. Iako je vrlo lako prijaviti se kao \"root\" da biste radili sve i "
+"sva拧ta,\"to tako膽e mo啪e biti i vrlo opasno! Jedna gre拧ka mo啪e zna膷iti da va拧 "
+"sistem\n"
+"vi拧e ne radi. Ako napravite ozbiljnu pogre拧ku kao obi膷an korisnik, najgore\n"
+"拧to se mo啪e desiti jeste da izgubite neke informacije, ali ne i da uti膷ete "
+"na\n"
+"cijeli sistem.\n"
"\n"
-"Izaberite operativni sistem na listi gore ili\n"
-"sa膷ekajte %d sekundi do pokretanja podrazumjevanog OSa.\n"
+"U prvom polju unosite va拧e pravo ime i prezime. Naravno, ovo nije obavezno\n"
+"-- u stvari mo啪ete ovdje unijeti 拧ta god ho膰ete. DrakX 膰e koristiti prvu "
+"rije膷\n"
+"koju unesete i kopirati je u polje \"Korisni膷ko ime\", 拧to je ime koje 膰e "
+"ovaj\n"
+"korisnik unositi da bi u拧ao na sistem. Ako 啪elite, mo啪ete promijeniti "
+"ponu膽enu\n"
+"vrijednost. Idu膰i korak je da unesete 拧ifru. Sa sigurnosne ta膷ke gledi拧ta, "
+"拧ifra\n"
+"neprivilegovanog (obi膷nog) korisnika nije tako va啪na kao \"root\" 拧ifra, "
+"ali\n"
+"to nije razlog da je zanemarite tako 拧to 膰ete je ostaviti praznom ili\n"
+"prejednostavnom: na kraju krajeva, va拧e li膷ne datoteke je ono 拧to je u\n"
+"riziku.\n"
"\n"
+"Jednom kada kliknete na \"Prihvati korisnika\", mo啪ete ih dodati jo拧. "
+"Dodajte\n"
+"po jednog korisnika za svakog od va拧ih prijatelja: na primjer za va拧eg oca\n"
+"ili sestru. Kliknite na \"Dalje ->\" kada zavr拧ite dodavanje korisnika.\n"
+"\n"
+"Klikanjem na dugme \"Napredno\" mo啪ete promijeniti osnovni \"shell\" za tog\n"
+"korisnika (ponu膽en je bash).\n"
+"\n"
+"Kada zavr拧ite dodavanje svih korisnika, bi膰ete upitani da odaberete "
+"korisnika\n"
+"koji se mo啪e automatski prijaviti prilikom pokretanja sistema. Ako ste "
+"zainteresovani\n"
+"za ovu mogu膰nost (i ne brinete previ拧e o lokalnoj sigurnosti), izaberite "
+"啪eljenog\n"
+"korisnika i window manager, zatim kliknite na \"Dalje ->\". Ako niste "
+"zainteresovani\n"
+"za to, isklju膷ite opciju \"沤elite li koristiti ovu mogu膰nost?\"."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
+msgid "Configure Internet Access..."
+msgstr "Podesi Internet pristup..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "nedostaje kdesu"
+msgid "Norway"
+msgstr "Norve拧ka"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Snimanje ekrana 膰e biti dostupno nakon 拧to instalirate u %s"
+msgid "Danish"
+msgstr "Danska"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti snimak ekrana prije particioniranja"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Automatski uklju膷uje numlock pod konzolom i grafi膷kim okru啪enjem\n"
+"prilikom boota."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Molimo unesite IP konfiguraciju za ovaj ra膷unar.\n"
+"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
+"razdvojenoj ta膷kama (npr. 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
+"je\n"
+"neki paket smje拧ten na drugom CDu i on 膰e izbaciti trenutni CD i zamoliti "
+"vas\n"
+"da ubacite neki drugi po potrebi."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
+msgid "Processors"
+msgstr "Procesori"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bugarska"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "Nije izabran nijedan NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen ostrva"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Do拧lo je do problema prilikom pode拧avanja.\n"
+"Provjerite va拧u konekciju pomo膰u net_monitor ili mcc. Ako va拧a konekcija ne "
+"radi, mo啪ete ponovo pokrenuti pode拧avanje"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "SAD"
+msgid "partition %s is now known as %s"
+msgstr "particija %s je od sada poznata kao %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Austrija"
+msgid "Backup Other files..."
+msgstr "Backup-uj ostale datoteke..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italija"
+msgid "SMB server IP"
+msgstr "SMB server IP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Nizozemska"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "艩vedska"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Tabela particija za ure膽aj %s 膰e biti zapisana na disk!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norve拧ka"
+msgid "Installing HPOJ package..."
+msgstr "Instaliram HPOJ pakete..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Gr膷ka"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Vlastita boot disketa vam omogu膰uje da pokrenete Linux pri 膷emu ne ovisite\n"
+"od bootloader programa. Ovo je korisno ako ne 啪elite instalirati LILO (ili "
+"grub) na\n"
+"va拧 sistem, ako neki drugi operativni sistem uklanja LILO ili ako LILO ne "
+"radi\n"
+"na va拧oj trenutnoj konfiguraciji. Vlastiti bootdisk se mo啪e tako膽e koristiti "
+"sa\n"
+"Mandrake rescue image, pri 膷emu je mnogo lak拧e ispraviti neke ozbiljne\n"
+"sistemske kvarove. 沤elite li napraviti boot disketu za va拧 sistem?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Njema膷ka"
+msgid ", USB printer \\#%s"
+msgstr ", USB 拧tampa膷 \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "膶e拧ka"
+msgid "Latvian"
+msgstr "Latvijska"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgija"
+msgid "monthly"
+msgstr "mjese膷no"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Francuska"
+msgid "Module name"
+msgstr "Naziv modula"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Kostarika"
+msgid "Start at boot"
+msgstr "Pokreni na bootu"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre拧ka u otvaranju %s za pisanje: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Prvi sektor diska (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Nemam 拧ta da radim"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne mo啪ete koristiti 拧ifrovani datote膷ni sistem za ta膷ku montiranja %s"
+msgid "Use Unicode by default"
+msgstr "Podrazumijeva se Unicode"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu "
-"ta膷ku montiranja\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "modul Linux kernela koji upravlja ure膽ajem"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
+msgid "Trying to rescue partition table"
+msgstr "Poku拧avam da spasim tabelu particija"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo啪ete koristiti LVM logi膷ki volumen za ta膷ku montiranja %s"
+msgid "Option %s must be an integer number!"
+msgstr "Opcija %s mora biti cijeli broj!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogu膰nosti da rukuje sa ovim bez /boot particije.\n"
-"Molim kasnije dodajte /boot particiju"
+"Stavke koje morate popuniti:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ve膰 postoji particija sa ta膷kom montiranja %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ne mogu da pokrenem live upgrade !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Ta膷ka montiranja se treba sastojati samo od brojeva i slova"
+msgid "Name: "
+msgstr "Ime: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Ta膷ke montiranja moraju po膷injati sa /"
+msgid "16 million colors (24 bits)"
+msgstr "16 miliona boja (24 bita)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne mo啪ete koristiti ReiserFS za particije manje od 32MB"
+msgid "Allow all users"
+msgstr "Dozvoli svim korisnicima"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne mo啪ete koristiti JFS za particije manje od 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr "Oficijelna MandrakeSoft prodavnica"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Mijenjam veli膷inu"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kablovska konekcija"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Korisnik"
#: ../../fsedit.pm:1
#, c-format
@@ -986,1342 +1836,259 @@ msgstr ""
"\n"
"Sla啪ete li se sa gubitkom svih particija?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Gre拧ka"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Izvr拧i novi backup prije vra膰anja (samo za inkrementalni backup.)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "艩tampa膷 na paralelnom portu \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "sa /usr"
+msgid "Name"
+msgstr "Ime"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "jednostavno"
+msgid "mkraid failed"
+msgstr "mkraid nije uspio"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Uklju膷ujem swap particiju %s"
+msgid "Button 3 Emulation"
+msgstr "Emulacija 3 dugmeta"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gre拧ka u demontiranju %s: %s"
+msgid "Sending files..."
+msgstr "艩aljem datoteke..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
+msgid "Israeli (Phonetic)"
+msgstr "Izraelska (fonetska)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Montiram particiju %s"
+msgid "access to rpm tools"
+msgstr "pristup rpm alatima"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Provjeravam %s"
+msgid "edit"
+msgstr "izmijeni"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Morate izabrati ili unijeti 拧tampa膷 / ure膽aj!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
+msgid "Permission problem accessing CD."
+msgstr "Problem sa privilegijama tokom pristupa na CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s kao tip %s"
+msgid "Phone number"
+msgstr "Broj telefona"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Gre拧ka: Drajver \"%s\" za va拧u zvu膷nu karticu nije na listi"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknite na \"Dalje ->\" ako 啪elite obrisati sve podatke i particije koje\n"
-"su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na\n"
-"\"Dalje ->\" ne膰ete mo膰i vratiti podatke i particije koji se trenutno "
-"nalaze\n"
-"na ovom hard disku, uklju膷uju膰i i sve Windows podatke.\n"
-"\n"
-"Kliknite na \"<- Nazad\" da obustavite ovu operaciju bez gubitka\n"
-"podataka i particija na ovom hard disku."
+msgid "Printer name, description, location"
+msgstr "Naziv 拧tampa膷a, opis, lokacija"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji 啪elite obrisati kako biste instalirali va拧u novu "
-"Mandrake\n"
-"Linux particiju. Budite pa啪ljivi, svi podaci koji se nalaze na njemu 膰e "
-"biti\n"
-"izgubljeni i ne膰e se mo膰i vratiti!"
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"\"DrakX 膰e vam pru啪iti sa啪etak raznih informacija koje su prikupljene\n"
-"o va拧em sistemu. Ovisno o instaliranom hardveru, vjerovatno imate\n"
-"neke ili sve od navedenih stavki. Pojedina膷na stavka se sastoji od\n"
-"onoga 拧to je potrebno podesiti, nakon 膷ega slijedi kra膰i sa啪etak trenutne\n"
-"konfiguracije. Da biste ovo izmijenili, kliknite na odgovaraju膰e dugme "
-"\"Podesi\".\n"
-"\n"
-"* \"Tastatura\": provjerite trenutno mapu tastature i izmijenite je ako je\n"
-"potrebno.\n"
-"\n"
-"* \"Dr啪ava\": provjerite trenutno izabranu dr啪avu. Ako se nalazite negdje\n"
-"drugo, kliknite na dugme \"Podesi\" i izaberite neku drugu. Ako se va拧a\n"
-"zemlja ne nalazi na prikazanoj listi, kliknite na dugme \"Vi拧e\" da biste\n"
-"dobili cjelokupnu listu zemalja.\n"
-"\n"
-"* \"Vremenska zona\": DrakX automatski odre膽uje va拧u vremensku zonu\n"
-"na osnovu dr啪ave koju ste izabrali. Mo啪ete kliknuti na dugme \"Podesi\"\n"
-"ako ovo nije ispravno.\n"
-"\n"
-"* \"Mi拧\": provjerite trenutnu konfiguraciju mi拧a i klinire na dugme da je\n"
-"promijenite ako je to potrebno.\"\n"
-"\n"
-"* \"艩tampa膷\": klikanjem na dugme \"Podesi\" otvori膰e se 膷arobnjak za\n"
-"pode拧avanje 拧tampa膷a. Pogledajte odgovaraju膰e poglavlje ''Vodi膷a za\n"
-"po膷etnike'' za vi拧e informacija o pode拧avanju novog 拧tampa膷a. Interfejs\n"
-"koji je tamo prikazan je sli膷an onom koji 膰e biti kori拧ten tokom "
-"instalacije.\n"
-"\n"
-"* \"Zvu膷na kartica\": ako je na va拧em sistemu otkrivena zvu膷na kartica, ona "
-"膰e\n"
-"biti prikazana ovdje. Ako primjetite da prikazana zvu膷na kartica nije ona\n"
-"koja je ustvari dio va拧eg sistema, mo啪ete kliknuti na dugme i odabrati neki\n"
-"drugi drajver.\n"
-"\n"
-"* \"Grafi膷ki interfejs\": DrakX 膰e podesiti va拧 grafi膷ki interfejs za rad "
-"na\n"
-"rezoluciji \"800x600\" ili \"1024x768\". Ako vam to ne odgovara, kliknite\n"
-"na dugme \"Podesi\" kako biste druga膷ije podesili va拧 interfejs.\n"
-"\n"
-"* \"TV kartica\": ako je na va拧em sistemu prepoznata TV kartica, bi膰e\n"
-"prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na\n"
-"dugme \"Podesi\" kako biste poku拧ali podesiti je ru膷no.\n"
-"\n"
-"* \"ISDN kartica\": ako je na va拧em sistemu otkrivena ISDN kartica, ona\n"
-"膰e biti prikazana ovdje. Mo啪ete kliknuti na dugme \"Podesi\" da promijenite\n"
-"parametre vezane za nju.\n"
-"\n"
-"* \"Mre啪a\": ako 啪elite, mo啪ete podesiti va拧 Internet pristup ili pristup\n"
-"lokalnoj mre啪i.\n"
-"\n"
-"* \"Nivo sigurnosti\": ovdje mo啪ete promijeniti nivo sigurnosti sistema "
-"koji\n"
-"je pode拧en ranije.\n"
-"\n"
-"* \"Firewall\": ako planirate povezati va拧 ra膷unar na Internet, pametno je\n"
-"za拧tititi ga od upada postavljanjem firewalla. Pogledajte odgovaraju膰e\n"
-"poglavlje ''Vodi膷a za po膷etnike'' za detalje o pode拧avanju firewalla.\n"
-"\n"
-"* \"Bootloader\": ako 啪elite promijeniti postavke bootloadera, kliknite na "
-"to\n"
-"dugme. Ovo bi trebalo biti rezervisano za napredne korisnike.\n"
-"\n"
-"* \"Servisi\": ovdje mo啪ete fino pode拧avati koji servisi 膰e biti pokrenuti "
-"na\n"
-"va拧em ra膷unaru. Ako planirate koristiti ovaj ra膷unar kao server, dobra je\n"
-"ideja jo拧 jednom pregledati ove postavke."
+"Molim izaberite medij\n"
+"za backup."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Zvu膷na kartica\": ako je na va拧em sistemu otkrivena zvu膷na kartica, ona "
-"膰e\n"
-"biti prikazana ovdje. Ako primjetite da prikazana zvu膷na kartica nije ona\n"
-"koja je ustvari dio va拧eg sistema, mo啪ete kliknuti na dugme i odabrati neki\n"
-"drugi drajver."
+msgid "Use Xinerama extension"
+msgstr "Koristi Xinerama ekstenziju"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX 膰e najprije potra啪iti sve IDE ure膽aje prisutne na va拧em ra膷unaru. "
-"Tako膽er\n"
-"膰e pretra啪iti sistem za jednu ili vi拧e PCI SCSI kartica. Ako SCSI kartica "
-"bude\n"
-"prona膽ena, DrakX 膰e automatski instalirati odgovaraju膰i drajver.\n"
-"\n"
-"Budu膰i da pronala啪enje hardware-a nikad nije savr拧eno, DrakX mo啪da ne膰e\n"
-"prona膰i va拧e hard diskove. Ako se to desi, mora膰ete ih navesti ru膷no.\n"
-"\n"
-"Ako je potrebno da ru膷no odaberete PCI SCSI adapter, DrakX 膰e vas pitati\n"
-"da li 啪elite navesti neke opcije za njega. Trebate dopustiti DrakXu da "
-"ispita\n"
-"hardware za neke opcije specifi膷ne za tu karticu. Ovo obi膷no radi dobro.\n"
-"\n"
-"Ako DrakX ne mo啪e ispitati opcije koje trebaju biti proslije膽ene, mora膰ete\n"
-"ru膷no navesti opcije za drajver."
+msgid "West Europe"
+msgstr "Zapadna Evropa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Sada je vrijeme da izaberete sistem 拧tampe za va拧 ra膷unar. Drugi OSi\n"
-"vam mo啪da nude jedan, ali Mandrake Linux nudi dva. Svaki od ovih sistema\n"
-"je najbolji za odre膽enu vrstu konfiguracije.\n"
-"\n"
-"* \"pdq\" -- skra膰eno za ''拧tampaj i nemoj stavljati u red'' (print, don't "
-"queue) je\n"
-"najbolji izbor ako imate direktnu vezu na 拧tampa膷, 啪elite izlaz za paniku u\n"
-"slu膷ajevima zaglavljivanja papira i nemate mre啪ne 拧tampa膷e. (\"pdq\" mo啪e\n"
-"rije拧iti samo vrlo jednostavne mre啪ne slu膷ajeve i pomalo je spor kada se "
-"koristi\n"
-"sa mre啪ama.) Preporu膷ujemo da koristite \"pdq\" ako je ovo va拧e prvo "
-"iskustvo\n"
-"sa GNU/Linuxom.\n"
-"\n"
-"* \"CUPS\" - ''Common Unix Printing System'' (uobi膷ajeni UNIX sistem "
-"拧tampe)\n"
-"je odli膷an izbor za 拧tampanje na 拧tampa膷 koji se nalazi lokalno ili s druge "
-"strane\n"
-"planete. Vrlo ga je jednostavno podesiti i mo啪e slu啪iti kao server ili "
-"klijent za\n"
-"prastari \"lpd\" sistem 拧tampe, tako da je kompatibilan sa starijim "
-"operativnim\n"
-"sistemima kojima mo啪da jo拧 trebaju usluge 拧tampanja. Mada je vrlo mo膰an,\n"
-"osnovno pode拧avanje je skoro jednako lagano kao za \"pdq\". Ako 啪elite\n"
-"simulirati \"lpd\" server, provjerite da li ste pokrenuli \"cups-lpd\" "
-"servis.\n"
-"\"CUPS\" uklju膷uje grafi膷ke alate za 拧tampanje ili izbor opcija 拧tampa膷a,\n"
-"te za upravljanje 拧tampa膷em.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"Ako sada napravite izbor, pa kasnije zaklju膷ite da vam se ne svi膽a izabrani\n"
-"sistem 拧tampe, mo啪ete ga promijeniti pokretanjem PrinterDrake iz Mandrake\n"
-"Kontrolnog centra i klikanjem na dugme Ekspert."
+"OPCIJE:\n"
+" --help - ispisuje ovu pomo膰.\n"
+" --report - program treba biti neki od mandrake alata\n"
+" --incident - program treba biti neki od mandrake alata"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO i grub su Linux bootloader-i. Ova faza je obi膷no automatizovana.\n"
-"DrakX 膰e analizirati boot sektor diska i postupati u skladu s onim 拧to\n"
-"zatekne tamo:\n"
-"\n"
-" * ako prona膽e Windows boot sektor, bi膰e zamijenjen sa grub/LILO boot\n"
-"sektorom. Na ovaj na膷in bi膰ete u mogu膰nosti da u膷itate ili GNU/Linux ili\n"
-"neki drugi OS.\n"
-"\n"
-" * ako prona膽e grub ili LILO boot sektor, zamijeni膰e ga novim.\n"
-"\n"
-"Ako ne mo啪e donijeti odluku, DrakX 膰e vas pitati gdje da postavi\n"
-"bootloader.\n"
-"\n"
-"\"Boot ure膽aj\": u ve膰ini slu膷ajeva, ne trebate mijenjati ponu膽eno\n"
-"(\"Prvi sektor diska (MBR)\"), ali ako odlu膷ite, mo啪ete instalirati "
-"bootloader\n"
-"na drugi hard disk (\"/dev/hdb\") ili 膷ak na disketu (\"Na disketi\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 verzija %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Nakon 拧to podesite op拧te parametre bootloadera, dobi膰ete listu opcija\n"
-"koja 膰e biti prikazana prilikom svakog boot-a.\n"
-"\n"
-"Ako na va拧em ra膷unaru postoje neki drugi operativni sistemi, oni 膰e biti\n"
-"dodani na tu listu. Mo啪ete fino podesiti postoje膰e opcije klikaju膰i na "
-"dugme\n"
-"\"Dodaj\" da biste dodali novu opciju; izborom postoje膰e opcije i klikanjem\n"
-"na \"Izmijeni\" ili \"Ukloni\" da biste je izmijenili ili uklonili. \"U redu"
-"\" potvr膽uje\n"
-"va拧e izmjene.\n"
-"\n"
-"Tako膽e mo啪da ne 啪elite dati pristup na ove druge operativne sisteme bilo "
-"kome\n"
-"ko sjedne za ra膷unar i restartuje ga. Mo啪ete obrisati pojedine stavke iz "
-"boot\n"
-"menija, ali odgovaraju膰e operativne sisteme vi拧e ne膰ete mo膰i pokrenuti bez\n"
-"boot diskete!"
+msgid "Copying %s"
+msgstr "Kopiram %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Ovaj dijalog vam omogu膰uje da fino podesite va拧 bootloader:\n"
-"\n"
-" * \"Koristi bootloader\": ovdje su tri izbora za va拧 bootloader:\n"
-"\n"
-" * \"GRUB\": ako preferirate grub (tekstualni meni),\n"
-"\n"
-" * \"LILO sa tekstualnim menijem\": ako preferirate LILO sa\n"
-"njegovim tekstualnim interfejsom.\n"
-"\n"
-" * \"LILO sa grafi膷kim menijem\": ako preferirate LILO sa njegovim\n"
-"grafi膷kim interfejsom.\n"
-"\n"
-" * \"Boot ure膽aj\": u ve膰ini slu膷ajeva nije potrebno da mijenjate\n"
-"ponu膽enu vrijednost (\"/dev/hda\"), ali ako to 啪elite, bootloader\n"
-"mo啪e biti instaliran na drugi hard disk (\"/dev/hdb\") ili 膷ak na\n"
-"disketu (\"/dev/fd0\");\n"
-"\n"
-" * \"Pauza prije bootanja default image-a\": nakon boota ili reboota\n"
-"ra膷unara, ovo je vrijeme koje je dato korisniku za ra膷unarom da izabere\n"
-"neku opciju iz boot menija koja se razlikuje od izabrane.\n"
-"\n"
-"!! Pazite da ako odaberete da ne 啪elite instalirati bootloader (klikanjem\n"
-"na \"Presko膷i\"), morate se pobrinuti da imate neki na膷in za pokretanje\n"
-"va拧eg Mandrake Linux sistema! Budite sigurni da znate 拧ta ho膰ete prije\n"
-"nego 拧to promijenite neku od ovih opcija. !!\n"
-"\n"
-"Klik na dugme \"Napredno\" u ovom dijalogu vam pru啪a napredne opcije\n"
-"rezervisane za ekspertnog korisnika."
+msgid "Choose color"
+msgstr "Izaberite boju"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Ovo je najva啪nija odluka za sigurnost va拧eg GNU/Linux sistema: trebate\n"
-"unijeti \"root\" 拧ifru, \"Root\" je sistemski administrator i jedini "
-"korisnik kojem\n"
-"je dozvoljeno da updatuje sistem, dodaje druge korisnike, mijenja "
-"konfiguraciju\n"
-"sistema itd. Ukratko, \"root\" mo啪e raditi sve! Stoga trebate izabrati 拧ifru "
-"koju\n"
-"je te拧ko pogoditi - DrakX 膰e vam re膰i da li je 拧ifra koju ste odabrali "
-"prelagana.\n"
-"Kao 拧to mo啪ete vidjeti, niste prisiljeni da unesete 拧ifru, ali vam "
-"savjetujemo da\n"
-"to uradite. GNU/Linux je podlo啪an operatorskim gre拧kama kao i bilo koji "
-"drugi\n"
-"operativni sistem. Po拧to \"root\" mo啪e prevazi膰i sva ograni膷enja i "
-"nenamjerno\n"
-"pobrisati sve podatke na particijama neoprezno im pristupaju膰i, va啪no je da "
-"je\n"
-"te拧ko postati \"root\".\n"
-"\n"
-"艩ifra treba biti kombinacija alfanumeri膷kih znakova i biti barem 8 znakova "
-"duga.\n"
-"Nikad ne zapisujte \"root\" 拧ifru -- time va拧 sistem postaje lagano "
-"kompromitovati.\n"
-"\n"
-"Jedan izuzetak -- ne dozvolite da 拧ifra bude preduga ili prekomplikovana "
-"po拧to\n"
-"膰ete je morati zapamtiti!\n"
-"\n"
-"艩ifra ne膰e biti prikazana na ekranu dok je unosite. Da bismo smanjili "
-"mogu膰nost\n"
-"gre拧ke zbog kucanja naslijepo, mora膰ete unijeti 拧ifru dva puta. Ako nekim\n"
-"slu膷ajem ponovite istu gre拧ku dva puta, ovu ''neispravnu'' 拧ifru trebate "
-"koristiti\n"
-"prilikom prve prijave.\n"
-"\n"
-"Ako 啪elite da pristup ovom ra膷unaru bude kontroliran pomo膰u servera za\n"
-"autentikaciju, kliknite na dugme \"Napredno\".\n"
-"\n"
-"Ako va拧a mre啪a koristi LDAP, NIS ili PDC Windows domen autentikacione\n"
-"servise, izaberite odgovaraju膰i kao \"autentikaciju\". Ako ne znate koji\n"
-"koristiti, pitajte va拧eg mre啪nog administratora.\n"
-"\n"
-"Ako imate problema sa pam膰enjem 拧ifara, mo啪ete izabrati opciju \"Bez\n"
-"拧ifre\", pod uslovom da va拧 ra膷unar ne膰e biti spojen na Internet i da\n"
-"vjerujete svakome ko mu ima fizi膷ki pristup."
+msgid "Dominican Republic"
+msgstr "Dominikanska Republika"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod Windows\n"
-"operativnim sistemom, pod GNU/Linuxom se zove \"ttyS0\" ."
+msgid "Swaziland"
+msgstr "Svazilend"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Obi膷no DrakX nema problema da odredi broj dugmadi na va拧em mi拧u.\n"
-"Ako ima, pretpostavi膰e da imate mi拧 sa dva dugmeta i podesi膰e simulaciju\n"
-"tre膰eg dugmeta. Tre膰e dugme se mo啪e ''pritisnuti'' na mi拧u sa dva dugmeta\n"
-"istovremenim klikom na lijevo i desno dugme mi拧a. DrakX 膰e automatski\n"
-"znati da li mi拧 koristi PS/2, serijski ili USB interfejs.\n"
-"\n"
-"Ako iz nekog razloga 啪elite navesti druga膷iji tip mi拧a, izaberite ga sa\n"
-"ponu膽ene liste.\n"
-"\n"
-"Ako izaberete mi拧 razli膷it od ponu膽enog, bi膰e prikazan testni ekran.\n"
-"Koristite mi拧 i to膷ki膰 da potvrdite da su postavke ta膷ne i da mi拧 radi "
-"ispravno.\n"
-"Ako mi拧 ne radi kako treba, pritisnite tipku space ili Enter da prekinete "
-"test\n"
-"i vratite se na listu izbora.\n"
-"\n"
-"Mi拧evi sa to膷ki膰em 膷esto nisu prepoznati automatski, stoga trebate izabrati\n"
-"mi拧 na listi. Pazite da izaberete odgovaraju膰i port na koji je va拧 mi拧 "
-"priklju膷en.\n"
-"Nakon izbora mi拧a i pritiska na dugme \"Dalje ->\", na ekranu 膰e biti "
-"prikazana\n"
-"slika mi拧ra. Pomjerajte to膷ki膰 mi拧a kako biste provjerili da li ispravno "
-"funkcioni拧e.\n"
-"Kada vidite da se to膷ki膰 na ekranu pomjera onako kako vi vrtite stvarni "
-"to膷ki膰,\n"
-"provjerite dugmad i provjerite da li se pokaziva膷 na ekranu pomjera onako "
-"kako\n"
-"vi pomjerate mi拧."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Va拧 izbor preferiranog jezika 膰e se odraziti na jezik dokumentacije,\n"
-"instalacione procedure i generalno sistema. Najprije izaberite oblast u\n"
-"kojoj se nalazite, a zatim jezik kojim govorite.\n"
-"\n"
-"Klikanjem na dugme \"Napredno\" mo啪ete izabrati druge jezike koje\n"
-"啪elite instalirati na va拧u radnu stanicu, time instaliraju膰i sistemsku\n"
-"dokumentaciju i aplikacije za svaki od izabranih jezika. Na primjet, ako\n"
-"膰e va拧 ra膷unar koristiti osobe iz 拧panije, izaberite Engleski kao osnovni\n"
-"jezik na listi, a 艩panski u oblasti Napredno.\n"
-"\n"
-"Obratite pa啪nju da niste ograni膷eni na samo jedan dodatni jezik. Mo啪ete\n"
-"ih izabrati nekoliko ili 膷ak ih instalirati sve klikom na polje \"Svi jezici"
-"\".\n"
-"Va拧 izbor podr拧ke za neki jezik ozna膷ava da 膰e biti instaliran prijevod,\n"
-"fontovi, pravila za provjeru pravopisa itd. za taj jezik. Pored toga, "
-"opcija\n"
-"\"Koristi Unicode\" 膰e prisiliti upotrebu Unicode-a (UTF-8) na cijelom\n"
-"sistemu. No, obratite pa啪nju da je ovo eksperimentalna mogu膰nost. Ako\n"
-"izaberete nekoliko jezika koji zahtijevaju razli膷ito kodiranje, Unicode 膰e\n"
-"svejedno biti instaliran.\n"
-"\n"
-"Da prebacujete izme膽u raznih jezika instaliranih na va拧em sistemu, mo啪ete\n"
-"pokrenuti kao \"root\" naredbu \"/usr/sbin/localedrake\", 膷ime mijenjate\n"
-"jezik koji koristi 膷itav sistem. Izvr拧avanjem te naredbe kao obi膷an "
-"korisnik\n"
-"mijenjate jezi膷ke postavke samo za tog konkretnog korisnika."
+msgid "Please check if you are using CDRW media"
+msgstr "Molim uklju膷ite ako koristite CDRW medij"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Ovisno o osnovnom jeziku koji izaberete u Sekciji \"Jezik\", DrakX 膰e\n"
-"automatski izabrati odre膽eni tip tastature. Ipak, mo啪da nemate tastaturu\n"
-"koja ta膷no odgovara va拧em jeziku: npr. ako ste 艩vajcarac koji govori\n"
-"engleski, mo啪da imate 拧vajcarsku tastaturu. Ili ako govorite engleski ali\n"
-"se nalazite u Kvibeku, mo啪da 膰ete se na膰i u situaciji gdje se va拧 jezik i\n"
-"tastatura ne poklapaju. U svakom slu膷aju, ovaj korak instalacije vam\n"
-"omogu膰ava da izaberete odgovaraju膰u tastaturu sa liste.\n"
-"\n"
-"Kliknite na dugme \"Vi拧e\" kako bi vam bila predstavljena potpuna lista\n"
-"podr啪anih tastatura.\n"
-"\n"
-"Ako izaberete raspored tipaka koji je baziran na ne-latini膷noj abecedi,\n"
-"sljede膰i dijalog 膰e vam ponuditi da izaberete tipke pomo膰u kojih mo啪ete\n"
-"prebaciti tastaturu izme膽u latini膷nog i ne-latini膷nog rasporeda."
+"Izaberite hard disk koji 啪elite obrisati kako biste instalirali va拧u novu "
+"Mandrake\n"
+"Linux particiju. Budite pa啪ljivi, svi podaci koji se nalaze na njemu 膰e "
+"biti\n"
+"izgubljeni i ne膰e se mo膰i vratiti!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Ovaj korak se aktivira samo ako je na va拧em ra膷unaru prona膽ena postoje膰a\n"
-"GNU/Linux particija.\n"
-"\n"
-"DrakX sada treba znati da li 啪elite izvr拧iti novu instalaciju ili "
-"nadogradnju postoje膰eg\n"
-"Mandrake Linux sistema:\n"
-"\n"
-" * \"Instaliraj\": Naj膷e拧膰e ovo 膰e u potpunosti obrisati stari sistem. Ako "
-"啪elite\n"
-"promijeniti particioniranje starog hard diska ili promijeniti datote膷ni "
-"sistem,\n"
-"trebate koristiti ovu opciju. Ali, ovisno o va拧oj 拧emi particioniranja, "
-"mo啪ete\n"
-"sprije膷iti da neki od va拧ih postoje膰ih podataka budu prepisani.\n"
-"\n"
-" * \"Nadogradi\": Ova vrsta instalacije vam omogu膰uje da updatujete pakete\n"
-"koji su trenutno instalirani na va拧em Mandrake Linux sistemu. Va拧a trenutna\n"
-"拧ema particioniranja i korisni膷ki podaci ne膰e biti izmijenjeni. Ve膰ina "
-"ostalih koraka\n"
-"konfiguracije ostaju kao 拧to jesu, sli膷no obi膷noj instalaciji.\n"
-"\n"
-"Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandrake Linux sistemima "
-"koji\n"
-"koriste verziju \"8.1\" ili kasniju. Obavljanje nadogradnje na ranijim "
-"verzijama\n"
-"Mandrake Linuxa, prije verzije \"8.1\", nije preporu膷eno."
+msgid " on parallel port \\#%s"
+msgstr " na paralelnom portu \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Dr啪ava\": provjerite trenutni izbor dr啪ave. Ako se ne nalazite ovdje,\n"
-"kliknite na dugme \"Podesi\" i izaberite neku drugu dr啪avu. Ako se va拧a\n"
-"zemlja ne nalazi na listi, kliknite na dugme \"Vi拧e\" kako biste dobili "
-"listu\n"
-"svih dr啪ava."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Koristite tipke %c i %c za izbor jedne od opcija."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Na va拧em hard disku ustanovljeno je vi拧e od jedne Microsoft particije.\n"
-"Molim izaberite onu koju 啪elite smanjiti kako biste instalirali va拧 "
-"Mandrake\n"
-"Linux operativni sistem.\n"
-"\n"
-"Svaka particija je navedena ovako: \"Linux ime\", \"Windows ime\",\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" se sastoji od: \"vrste hard diska\", \"broja hard diska\",\n"
-"\"broja particije\" (na primjer, \"hda1\").\n"
-"\n"
-"\"Vrsta hard diska\" je \"hd\" ako je va拧 hard disk IDE, a \"sd\" ako je\n"
-"u pitanju SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
-"diskova:\n"
-"\n"
-" * \"a\" zna膷i \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" zna膷i \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" zna膷i \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" zna膷i \"slave hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-"Kod SCSI hard diskova, \"a\" je \"disk sa najni啪im SCSI IDom\", \"b\"\n"
-"je \"drugi najni啪i SCSI ID\", itd.\n"
-"\n"
-"\"Windows ime\" je slovo kojim je va拧 hard disk ozna膷en pod Windowsom\n"
-"(prva particija prvog diska se zove \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Op拧ti mi拧 sa 2 dugmeta"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy.\n"
-"Useful for later partition-table recovery if necessary. It is strongly\n"
-"recommended to perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and load your "
-"initial\n"
-"partitions table.\n"
-"\n"
-" * \"removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(Type, options, format) and gives more information.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the chapter ext2fs from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+#: ../../lvm.pm:1
+#, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "Najprije ukloni logi膷ke volumene\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Na ovom mjestu, DrakX vam omogu膰uje da izaberete sigurnosni nivo\n"
-"koji 啪elite imati na ovom ra膷unaru. Kao pravilo, sigurnosni nivo treba biti\n"
-"tim vi拧i 拧to su va啪niji podaci na ra膷unaru, a pogotovo ako 膰e ra膷unar biti\n"
-"direktno izlo啪en Internetu. Ve膰im nivoom sigurnosti obi膷no gubite na\n"
-"jednostavnosti kori拧tenja.\n"
-"\n"
-"Ako ne znate 拧ta izabrati, zadr啪ite ponu膽enu opciju."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Osvjetljene stavke 膰e biti bootane automatski za %d sekundi."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Prilikom instalacije Mandrake Linuxa, mogu膰e je da su neki paketi\n"
-"a啪urirani od zadnjeg izdanja. Mogu膰e je da su ispravljeni bugovi ili\n"
-"rje拧ena neka sigurnosna pitanja. Ako 啪elite iskoristiti ova unaprje膽enja,\n"
-"mo啪ete ih sada dobaviti sa Interneta. Izaberite \"Da\" ako imate ispravnu\n"
-"Internet vezu, ili \"Ne\" ako 膰ete radije instalirati a啪urirane pakete\n"
-"kasnije.\n"
-"\n"
-"Ako izaberete \"Da\" dobi膰ete listu mjesta sa kojih se mogu skinuti\n"
-"novi paketi. Izaberite ono najbli啪e vama. Pojavi膰e se stablo za izbor\n"
-"paketa: pregledajte izabrano i pritisnite \"Instaliraj\" da dobavite i\n"
-"instalirate izabrane pakete, ili \"Odustani\" za prekid."
+"Ne mogu pisati u /etc/sysconfig/bootsplash\n"
+"Datoteka nije prona膽ena."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Pristup Internetu"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
-"mogle koristiti (formatiranje zna膷i kreiranje datote膷nog sistema). \n"
-"\n"
-"U ovom trenutku mo啪da 膰ete po啪eljeti da reformatirate neke ve膰 postoje膰e\n"
-"particije kako biste pobrisali podatke koje sadr啪e. Ako 啪elite to u膷initi, "
-"molim\n"
-"tako膽e izaberite i te particije.\n"
-"\n"
-"Molim obratite pa啪nju da nije neophodno formatirati sve postoje膰e "
-"particije.\n"
-"Morate reformatirati particije koje sadr啪e operativni sistem (kao 拧to su\n"
-"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
-"sadr啪e\n"
-"podatke koje 啪elite zadr啪ati (tipi膷no /home).\n"
-"\n"
-"Molimo da pa啪ljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama 膰e biti pobrisani i ne膰ete biti u mogu膰nosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na \"Dalje ->\" kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na \"<- Nazad\" ako 啪elite da izaberete druge particije za "
-"instalaciju\n"
-"va拧eg novog Linux-Mandrake operativnog sistema.\n"
-"\n"
-"Kliknite na \"Napredno\" da izaberete particije koje 啪elite provjeriti radi\n"
-"lo拧ih blokova."
+"y koordinata tekst polja\n"
+"u broju znakova"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"To je to. Instalacija je sada zavr拧ena i va拧 GNU/Linux sistem je spreman\n"
-"za upotrebu. Samo kliknite na \"Dalje ->\" da restartujete sistem. Prva "
-"stvar\n"
-"koju 膰ete ugledati nakon 拧to ra膷unar zavr拧i hardverske provjere je meni\n"
-"bootloadera, koji vam nudi izbor operativnog sistema koji 啪elite pokrenuti.\n"
-"\n"
-"Dugme \"Napredno\" 膰e vam ponuditi jo拧 dva dugmeta za:\n"
-"\n"
-" * \"generisanje autoinstalacijske diskete\": da biste napravili "
-"instalacionu\n"
-"disketu koja 膰e automatski izvr拧iti cijelu instalaciju bez intervencije "
-"operatora,\n"
-"sli膷nu instalaciji koju ste upravo konfigurisali.\n"
-"\n"
-" Obratite pa啪nju na dvije razli膷ite opcije koje su dostupne nakon "
-"klikanja\n"
-"na ovo dugme:\n"
-"\n"
-" * \"Ponovi\". Ovo je djelomi膷no automatizirana instalacija. Korak\n"
-"particioniranja je jedini interaktivni dio.\n"
-"\n"
-" * \"Automatizirano\". Potpuno automatska instalacija: hard disk je\n"
-"potpuno prepisan, svi podaci su izgubljeni.\n"
-"\n"
-" Ova mogu膰nost je vrlo prikladna kada instalirate nekoliko sli膷nih\n"
-"ra膷unara. Pogledajte odjeljak Automatska instalacija na na拧oj web stranici\n"
-"za vi拧e informacija.\n"
-"\n"
-" * \"Snimi izbor paketa\" (*): snima listu paketa koje ste izabrali u ovoj\n"
-"instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom, "
-"ubacite\n"
-"disketu i zapo膷nite instalaciju. Na upitu, pritisnite tipku [F1] i ukucajte\n"
-">>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) Potrebna vam je FAT-formatirana disketa (da biste je napravili pod\n"
-"GNU/Linuxom, kucajte \"mformat a:\")"
+"Za listu opcija koje su dostupne za trenutni 拧tampa膷 kliknite na dugme "
+"\"Lista opcija za 拧tampu\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Uklju膷ujem servere..."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printing test page(s)..."
+msgstr "艩tampam testnu stranicu..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ve膰 postoji particija sa ta膷kom montiranja %s\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2339,51 +2106,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Na ovom mjestu trebate izabrati gdje 啪elite instalirati Mandrake Linux\n"
"operativni sistem na va拧em hard disku. Ako je disk prazan ili ako postoje膰i\n"
@@ -2460,242 +2225,140 @@ msgstr ""
"kori拧tenje DiskDrake alata mo啪ete na膰i u ``Vodi膷u za po膷etnike'', odjeljak\n"
"``Upravljanje va拧im particijama''."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Kona膷no, bi膰ete upitani da li 啪elite vidjeti grafi膷ki interfejs nakon "
-"pokretanja.\n"
-"Primjetite da vam je ovo pitanje postavljeno 膷ak i ako izaberete da ne膰ete\n"
-"testirati konfiguraciju. O膷ito, trebate odgovoriti \"Ne\" ako 膰e va拧 "
-"ra膷unar\n"
-"imati ulogu servera ili ako imate problema sa pode拧avanjem ekrana."
+msgid "Ukraine"
+msgstr "Ukrajina"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"U slu膷aju da postoji vi拧e servera za va拧u karticu, sa ili bez 3D\n"
-"ubrzanja, predlo啪en vam je server koji najbolje odgovara va拧im\n"
-"potrebama."
+msgid "Application:"
+msgstr "Aplikacija:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Rezolucija\n"
-"\n"
-" Mo啪ete izabrati rezolucije i broj boja me膽u vrijednostima koje su "
-"mogu膰e\n"
-"na va拧em hardveru. Izaberite one vrijednosti koje vam najbolje odgovaraju\n"
-"(mo膰i 膰ete ih promijeniti nakon instalacije). Primjer izabrane konfiguracije "
-"je\n"
-"prikazan na monitoru."
+msgid "External ISDN modem"
+msgstr "Vanjski ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" Instalacioni program obi膷no mo啪e prepoznati i podesiti monitor koji\n"
-"je povezan na va拧 ra膷unar. Ako se ovo ne desi, mo啪ete odabrati neki\n"
-"monitor sa ove liste."
+msgid "if set to yes, report check result by mail."
+msgstr "ako je postavljeno na da, prijavljuje rezultate provjere mailom."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Va拧 izbor? (podrazumjevano %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Uklanjanje problema"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-"Monitor\n"
"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
-"Resolution\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
+"Klasi膷ni na膷in utvr膽ivanja bugova u zvu膷nom sistemu je izvr拧avanje\n"
+"sljede膰ih naredbi:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" 膰e vam re膰i koji drajver koristi va拧a\n"
+"kartica ina膷e\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" 膰e vam re膰i koji drajver je\n"
+"trenutno u upotrebi\n"
"\n"
+"- sa \"/sbin/lsmod\" mo啪ete provjeriti da li je modul (drajver) u膷itan\n"
+"ili ne\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" vam\n"
+"govori da li su servisi sound i alsa pode拧eni da se pokre膰u na\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" 膰e vam re膰i da li je zvuk uti拧an (muted) ili ne\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+"- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvu膷nu "
+"karticu.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Grafi膷ka kartica\n"
-"\n"
-" Instalacija sada mo啪e normalno prepoznati i podesiti grafi膷ku karticu\n"
-"koja je instalirana na va拧em ra膷unaru. Ako se to ne desi, mo啪ete\n"
-"izabrati na ovoj listi karticu koju ustvari posjedujete.\n"
+"Testna stranica je poslana 拧tampa膷u.\n"
+"Mo啪e potrajati odre膽eno vrijeme dok 拧tampa膷 krene.\n"
+"Status 拧tampanja:\n"
+"%s\n"
"\n"
-" U slu膷aju da postoji vi拧e dostupnih servera za va拧u karticu, sa ili bez\n"
-"3D ubrzanja, bi膰e vam predlo啪en izbor servera koji najbolje odgovara\n"
-"va拧im potrebama."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga\n"
-"u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je "
-"sat\n"
-"na va拧oj mati膷noj plo膷i pode拧en na lokalno vrijeme, mo啪ete isklju膷iti ovu\n"
-"opciju isklju膷uju膰i \"Hardverski sat pode拧en na GMT\", 拧to 膰e saop拧titi\n"
-"GNU/Linuxu da su sistemski sat i hardverski sat u istoj vremenskoj zoni.\n"
-"Ovo je korisno kada se na ra膷unaru tako膽e nalazi i drugi operativni sistem\n"
-"kao 拧to je Windows.\n"
-"\n"
-"Opcija \"Automatsko uskla膽ivanje vremena\" 膰e automatski regulisati sat\n"
-"spajaju膰i se na udaljeni time server na Internetu. Kako bi ova mogu膰nost\n"
-"radila, morate imati ispravnu Internet konekciju. Najbolje je izabrati time "
-"server\n"
-"negdje u va拧oj blizini. Ova opcija 膰e ustvari instalirati time server koji "
-"mogu\n"
-"koristiti i drugi ra膷unari u va拧oj lokalnoj mre啪i."
+msgid "daily"
+msgstr "dnevno"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ovim dijalogom mo啪ete izabrati koje servise 啪elite pokretati prilikom "
-"boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih pa啪ljivo i isklju膷ite sve one koji nisu "
-"potrebni\n"
-"prilikom boota.\n"
-"\n"
-"Kada izaberete servis dobi膰ete kratki tekst koji obja拧njava taj servis\n"
-"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
-"mijenjate predlo啪eni izbor.\n"
-"\n"
-"!! Budite vrlo pa啪ljivi sa ovim korakom ako namjeravate koristiti va拧 "
-"ra膷unar\n"
-"kao server: vjerovatno ne 啪elite da pokrenete neke servise koji vam ne\n"
-"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
-"ako su aktivni na serveru. Op膰enito, izaberite samo one servise koji vam\n"
-"stvarno trebaju. !!"
+msgid "and one unknown printer"
+msgstr "i jedan nepoznat 拧tampa膷"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"艩tampa膷\": klikanjem na dugme \"Podesi\" otvori膰ete 膷arobnjak za\n"
-"pode拧avanje 拧tampa膷a. Konsultujte odgovaraju膰e poglavlje \"Vodi膷a za\n"
-"po膷etnike\" za vi拧e informacija o tome kako podesiti novi 拧tampa膷. "
-"Interfejs\n"
-"koji je tamo prikazan je vrlo sli膷an onom koji se koristi prilikom "
-"instalacije."
+msgid "Ireland"
+msgstr "Irska"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
+msgid "kernel version"
+msgstr "Kernel verzija"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Vrati konfiguraciju "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Da li je ovo ispravno?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2733,4674 +2396,4358 @@ msgstr ""
"detalje o pode拧avanju, ili jednostavno sa膷ekajte da va拧 sistem bude\n"
"instaliran i koristite program koji je tamo opisan za pode拧avanje va拧e veze."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Ako ste naveli da 啪elite individualno izabrati pakete, bi膰e vam prikazano\n"
-"stablo koje sadr啪i sve pakete klasifikovane po grupama i podgrupama.\n"
-"Pregledaju膰i stablo, mo啪ete izabrati 膷itave grupe, podgrupe ili "
-"individualne\n"
-"pakete.\n"
-"\n"
-"Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji\n"
-"vam obja拧njava svrhu paketa.\n"
-"\n"
-"!! Ako izaberete neki serverski paket, zato 拧to ste specifi膷no izabrali taj\n"
-"paket ili zato 拧to je on dio grupe paketa, bi膰ete zamoljeni da potvrdite da\n"
-"zaista 啪elite da taj server bude instaliran. Mandrake Linux obi膷no "
-"automatski\n"
-"pokre膰e sve instalirane servise prilikom pokretanja sistema. 膶ak i ako su\n"
-"sigurni i nemaju poznatih problema u trenutku pakovanja distribucije,\n"
-"sasvim je mogu膰e da su neke sigurnosne rupe otkrivene nakon 拧to je\n"
-"dovr拧ena ova verzija Mandrake Linuxa. Ako niste sigurni 膷emu ta膷no\n"
-"slu啪i taj paket ili za拧to ga treba instalirati, kliknite na \"Ne\". Klikanje "
-"na\n"
-"\"Da\" 膰e instalirati navedene servise i oni 膰e biti automatski pokrenuti\n"
-"tokom pokretanja sistema. !!\n"
-"\n"
-"Opcija \"Automatske zavisnosti\" se koristi da bi se isklju膷io dijalog "
-"upozorenja\n"
-"koji se pojavljuje svaki put kada instalacioni program automatski izabere\n"
-"neki paket kako bi razrije拧io neku zavisnost. Pojedini paketi imaju "
-"zavisnost\n"
-"jedan od drugog u smislu da instalacija jednog paketa tra啪i da bude "
-"instaliran\n"
-"i drugi. Instalacioni program mo啪e odrediti koji paketi su potrebni da bi "
-"se\n"
-"zadovoljila zavisnost i uspje拧no zavr拧ila instalacija.\n"
-"\n"
-"Mala ikona sa disketom na dnu liste vam omogu膰uje da u膷itate listu paketa\n"
-"koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako 啪elite "
-"da\n"
-"imate nekoliko ra膷unara koji su identi膷no pode拧eni. Nakon klika na ovu "
-"ikonu\n"
-"bi膰ete zamoljeni da u disketnu jedinicu stavite disketu napravljenu tokom "
-"ranije\n"
-"instalacije. Pogledajte drugi savjet na zadnjem koraku da biste saznali kako "
-"se\n"
-"pravi ova disketa."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\" Installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
-"je\n"
-"neki paket smje拧ten na drugom CDu i on 膰e izbaciti trenutni CD i zamoliti "
-"vas\n"
-"da ubacite neki drugi po potrebi."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovdje su navedene Linux particije koje ve膰 postoje na va拧em hard disku.\n"
-"Mo啪ete zadr啪ati izbore koje je napravio 膷arobnjak, po拧to su oni dobri za\n"
-"najve膰i broj instalacija. Ako napravite neke izmjene, morate, ako ni拧ta "
-"drugo,\n"
-"definisati root particiju (\"/\"). Nemojte izabrati premalu particiju ili "
-"ne膰ete\n"
-"mo膰i instalirati dovoljno softvera. Ako 啪elite dr啪ati va拧e podatke na "
-"zasebnoj\n"
-"particiji, trebate tako膽e napraviti \"/home\" particiju (拧to je mogu膰e samo "
-"ako\n"
-"imate vi拧e od jedne Linux particije na raspolaganju).\n"
-"\n"
-"Svaka particija je navedena ovako: \"Ime\", \"Kapacitet\".\n"
-"\n"
-"\"Ime\" se sastoji od: \"vrsta hard diska\", \"broj hard diska\", \"broj\n"
-"particije\" (na primjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Vrsta hard diska\" je \"hd\" ako je va拧 hard disk IDE, a \"sd\" ako je\n"
-"u pitanju SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
-"diskova:\n"
-"\n"
-" * \"a\" zna膷i \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" zna膷i \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" zna膷i \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" zna膷i \"slave hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-"Kod SCSI hard diskova, \"a\" je \"disk sa najni啪im SCSI IDom\", \"b\"\n"
-"je \"drugi najni啪i SCSI ID\", itd."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux je vi拧ekorisni膷ki sistem, 拧to zna膷i da svaki korisnik mo啪e imati\n"
-"vlastite preference, vlastite datoteke i tako dalje. Mo啪ete pro膷itati "
-"''Po膷etni膷ki\n"
-"vodi膷'' da biste saznali vi拧e o vi拧ekorisni膷kim sistemima. Ali za razliku "
-"od\n"
-"\"root\"-a, koji je administrator sistema, korisnicima koje dodate u ovom "
-"trenutku\n"
-"ne膰e biti dozvoljeno da promijene ni拧ta osim vlastitih datoteka i vlastite\n"
-"konfiguracije, 膷ime je sistem za拧ti膰en od nenamjernih ili zlonamjernih "
-"izmjena\n"
-"koje mogu uticati na cijeli sistem. Mora膰ete kreirati najmanje jednog "
-"korisnika\n"
-"za vas same -- ovo je ra膷un koji trebate koristiti za rutinsku, svakodnevnu\n"
-"upotrebu. Iako je vrlo lako prijaviti se kao \"root\" da biste radili sve i "
-"sva拧ta,\"to tako膽e mo啪e biti i vrlo opasno! Jedna gre拧ka mo啪e zna膷iti da va拧 "
-"sistem\n"
-"vi拧e ne radi. Ako napravite ozbiljnu pogre拧ku kao obi膷an korisnik, najgore\n"
-"拧to se mo啪e desiti jeste da izgubite neke informacije, ali ne i da uti膷ete "
-"na\n"
-"cijeli sistem.\n"
-"\n"
-"U prvom polju unosite va拧e pravo ime i prezime. Naravno, ovo nije obavezno\n"
-"-- u stvari mo啪ete ovdje unijeti 拧ta god ho膰ete. DrakX 膰e koristiti prvu "
-"rije膷\n"
-"koju unesete i kopirati je u polje \"Korisni膷ko ime\", 拧to je ime koje 膰e "
-"ovaj\n"
-"korisnik unositi da bi u拧ao na sistem. Ako 啪elite, mo啪ete promijeniti "
-"ponu膽enu\n"
-"vrijednost. Idu膰i korak je da unesete 拧ifru. Sa sigurnosne ta膷ke gledi拧ta, "
-"拧ifra\n"
-"neprivilegovanog (obi膷nog) korisnika nije tako va啪na kao \"root\" 拧ifra, "
-"ali\n"
-"to nije razlog da je zanemarite tako 拧to 膰ete je ostaviti praznom ili\n"
-"prejednostavnom: na kraju krajeva, va拧e li膷ne datoteke je ono 拧to je u\n"
-"riziku.\n"
-"\n"
-"Jednom kada kliknete na \"Prihvati korisnika\", mo啪ete ih dodati jo拧. "
-"Dodajte\n"
-"po jednog korisnika za svakog od va拧ih prijatelja: na primjer za va拧eg oca\n"
-"ili sestru. Kliknite na \"Dalje ->\" kada zavr拧ite dodavanje korisnika.\n"
-"\n"
-"Klikanjem na dugme \"Napredno\" mo啪ete promijeniti osnovni \"shell\" za tog\n"
-"korisnika (ponu膽en je bash).\n"
-"\n"
-"Kada zavr拧ite dodavanje svih korisnika, bi膰ete upitani da odaberete "
-"korisnika\n"
-"koji se mo啪e automatski prijaviti prilikom pokretanja sistema. Ako ste "
-"zainteresovani\n"
-"za ovu mogu膰nost (i ne brinete previ拧e o lokalnoj sigurnosti), izaberite "
-"啪eljenog\n"
-"korisnika i window manager, zatim kliknite na \"Dalje ->\". Ako niste "
-"zainteresovani\n"
-"za to, isklju膷ite opciju \"沤elite li koristiti ovu mogu膰nost?\"."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Prije nego 拧to nastavimo, trebate pa啪ljivo pro膷itati uvjete licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju. Ako se sla啪ete sa svim\n"
-"uvjetima u njoj, kliknite na dugme \"Prihvati\". Ako ne, samo ugasite\n"
-"va拧 ra膷unar."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate tako膽e formatirati i %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ne mogu pristupiti kernelskim modulima koji odgovaraju va拧em kernelu "
-"(nedostaje datoteka %s), 拧to obi膷no zna膷i da je va拧a boot disketa zastarjela "
-"u odnosu na instalacioni medij (napravite noviju boot disketu)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Do拧lo je do gre拧ke - nije prona膽en nijedan ispravan ure膽aj na kojem se mogu "
-"kreirati novi file sistemi. Molimo provjerite va拧 hardware i prona膽ite uzrok "
-"gre拧ke"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre拧ka u 膷itanju datoteke %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da koristite ovaj izbor spa拧enih paketa, bootajte instalaciju sa ``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "膶arobnjak za pode拧avanje"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
+msgid "Autoprobe"
+msgstr "Ispitivanje"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
+msgid "Backup system files..."
+msgstr "Backup-uj sistemske datoteke..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Ne mogu koristiti broadcast bez NIS domene"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Da bi se omogu膰ilo unaprje膽enje va拧eg sistema, bi膰e uklonjeni sljede膰i "
-"paketi: %s\n"
-"\n"
-"\n"
-"沤elite li zaista deinstalirati ove pakete?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Ne"
+msgid "Removing printer \"%s\"..."
+msgstr "Uklanjam 拧tampa膷 \"%s\" ..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Da"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Izabrali ste sljede膰i server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali mo啪da 膰e biti prona膽eni u budu膰nosti. U tom slu膷aju, morate "
-"ih\n"
-"upgrade-ovati 拧to prije bude mogu膰e.\n"
+"Molim navedite gdje se nalazi datoteka auto_install.cfg.\n"
"\n"
+"Ostavite ovo praznim ako ne 啪elite podesiti re啪im automatske instalacije.\n"
"\n"
-"Da li zaista 啪elite instalirati ove servere?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Pode拧avanje sistema"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Instalacija sistema"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Zaustavljam mre啪u"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Nivo informacija koje se mogu dobiti cpuid instrukcijom"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Pokre膰em mre啪u"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
+msgid " on device: %s"
+msgstr "na ure膽aju: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni 膷arobnjak je na拧ao sljede膰a rje拧enja:"
+msgid "Remove Windows(TM)"
+msgstr "Ukloni Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ne mogu na膰i dovoljno prostora za instalaciju"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Pokre膰e X Font Server (ovo je nu啪no da bi XFree radio)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Sada mo啪ete particionirati %s.\n"
-"Kada zavr拧ite, ne zaboravite spasiti sa `w'"
+"Ve膰inu ovih vrijednosti uzimam iz\n"
+"va拧eg aktivnog sistema.\n"
+"Mo啪ete ih izmijeniti po potrebi."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Ru膷no particioniranje diska"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postoje膰e particije i podaci na njima 膰e biti izgubljeni na disku %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Imate vi拧e od jednog hard diska. Na koji od njih 啪elite instalirati Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Kron jo拧 uvijek nije dostupan kao ne-root"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Pobri拧i 膷itav disk"
+msgid "System"
+msgstr "Sistem"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Da li 啪elite koristiti ovu mogu膰nost?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veli膷ine (ili nije ostalo "
-"dovoljno prostora)"
+msgid "Arabic"
+msgstr "Arapska"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Da bi se osigurao integritet podataka nakon promjene veli膷ine, \n"
-"prilikom idu膰eg pokretanja Windows(TM) bi膰e izvr拧ena provjera datote膷nog "
-"sistema"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Smanjivanje FAT particije nije uspjelo: %s"
+"\n"
+"- Opcije:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Smanjujem Windows particiju"
+msgid "Password required"
+msgstr "Potrebna 拧ifra"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Mijenjam veli膷inu"
+msgid "%d minutes"
+msgstr "%d minuta"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
+msgid "Graphics card: %s"
+msgstr "Grafi膷ka karta: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Koju veli膷inu 啪elite da sa膷uvate za Windows na"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV transfer nije uspio!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX 膰e sada promijeniti veli膷inu va拧e Windows particije. Budite pa啪ljivi, "
-"ova\n"
-"operacija je opasna. Ako to ve膰 niste uradili, najprije napustite "
-"instalaciju,\n"
-"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
-"ponovo pokrenite instalaciju. Tako膽er biste trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na Ok."
+msgid "XFree configuration"
+msgstr "XFree konfiguracija"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Va拧a Windows particija je previ拧e fragmentirana. Molim restartujte va拧 "
-"ra膷unar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandrake "
-"Linux instalaciju."
+msgid "Choose action"
+msgstr "Izaberi akciju"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Izra膷unavam veli膷inu Windows particije"
+msgid "French Polynesia"
+msgstr "Francuska Polinezija"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"FAT resizer ne mo啪e izmijeniti va拧u particiju, \n"
-"do拧lo je do sljede膰e gre拧ke: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji 啪elite promijeniti veli膷inu?"
+"Obi膷no DrakX nema problema da odredi broj dugmadi na va拧em mi拧u.\n"
+"Ako ima, pretpostavi膰e da imate mi拧 sa dva dugmeta i podesi膰e simulaciju\n"
+"tre膰eg dugmeta. Tre膰e dugme se mo啪e ''pritisnuti'' na mi拧u sa dva dugmeta\n"
+"istovremenim klikom na lijevo i desno dugme mi拧a. DrakX 膰e automatski\n"
+"znati da li mi拧 koristi PS/2, serijski ili USB interfejs.\n"
+"\n"
+"Ako iz nekog razloga 啪elite navesti druga膷iji tip mi拧a, izaberite ga sa\n"
+"ponu膽ene liste.\n"
+"\n"
+"Ako izaberete mi拧 razli膷it od ponu膽enog, bi膰e prikazan testni ekran.\n"
+"Koristite mi拧 i to膷ki膰 da potvrdite da su postavke ta膷ne i da mi拧 radi "
+"ispravno.\n"
+"Ako mi拧 ne radi kako treba, pritisnite tipku space ili Enter da prekinete "
+"test\n"
+"i vratite se na listu izbora.\n"
+"\n"
+"Mi拧evi sa to膷ki膰em 膷esto nisu prepoznati automatski, stoga trebate izabrati\n"
+"mi拧 na listi. Pazite da izaberete odgovaraju膰i port na koji je va拧 mi拧 "
+"priklju膷en.\n"
+"Nakon izbora mi拧a i pritiska na dugme \"Dalje ->\", na ekranu 膰e biti "
+"prikazana\n"
+"slika mi拧ra. Pomjerajte to膷ki膰 mi拧a kako biste provjerili da li ispravno "
+"funkcioni拧e.\n"
+"Kada vidite da se to膷ki膰 na ekranu pomjera onako kako vi vrtite stvarni "
+"to膷ki膰,\n"
+"provjerite dugmad i provjerite da li se pokaziva膷 na ekranu pomjera onako "
+"kako\n"
+"vi pomjerate mi拧."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Podr拧ka za OKI 4w i kompatibilne 'winprinter' 拧tampa膷e."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo "
-"dovoljno prostora)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Pokre膰e ALSA zvu膷ni sistem (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Veli膷ina swap particije u MB:"
+msgid "Installing driver for %s card %s"
+msgstr "Instaliram drajver za %s karticu %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Veli膷ina root particije u MB:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Prebacili ste va拧 biv拧i podrazumjevani 拧tampa膷 (\"%s\"),Da li 膰e to tako膽er "
+"biti podrazumjevani 拧tampa膷 podnovim sistemom 拧tampe %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Izaberite veli膷ine"
+msgid "Enable Server"
+msgstr "Omogu膰i server"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju 啪elite koristiti za Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrajinska"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Mre啪ni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
+"va拧u konfiguraciju i va拧 hardware. Onda ponovo poku拧ajte podesiti udaljeni "
+"拧tampa膷."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postoje膰e particije za upotrebu"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Molimo ubacite boot disketu koju ste koristili u jedinicu %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Koristi postoje膰u particiju"
+msgid "Local network(s)"
+msgstr "Lokalna mre啪a (mre啪e)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Ukloni Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Va拧 %s je pode拧en.\n"
+"Sada mo啪ete skenirati dokumente koriste膰i \"XSane\" koji se nalazi u meniju "
+"Aplikacije/Multimedija/Grafika."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire kontroleri"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Nemate nijednu swap particiju\n"
+"Nakon 拧to podesite op拧te parametre bootloadera, dobi膰ete listu opcija\n"
+"koja 膰e biti prikazana prilikom svakog boot-a.\n"
"\n"
-"Svejedno nastavi?"
+"Ako na va拧em ra膷unaru postoje neki drugi operativni sistemi, oni 膰e biti\n"
+"dodani na tu listu. Mo啪ete fino podesiti postoje膰e opcije klikaju膰i na "
+"dugme\n"
+"\"Dodaj\" da biste dodali novu opciju; izborom postoje膰e opcije i klikanjem\n"
+"na \"Izmijeni\" ili \"Ukloni\" da biste je izmijenili ili uklonili. \"U redu"
+"\" potvr膽uje\n"
+"va拧e izmjene.\n"
+"\n"
+"Tako膽e mo啪da ne 啪elite dati pristup na ove druge operativne sisteme bilo "
+"kome\n"
+"ko sjedne za ra膷unar i restartuje ga. Mo啪ete obrisati pojedine stavke iz "
+"boot\n"
+"menija, ali odgovaraju膰e operativne sisteme vi拧e ne膰ete mo膰i pokrenuti bez\n"
+"boot diskete!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, napravite jednu particiju (ili kliknite na neku od postoje膰ih).\n"
-"Zatim izaberite opciju ``Ta膷ka montiranja'' i postavite je na `/'"
+msgid "System mode"
+msgstr "Sistem mod"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Neki dio hardware-a na va拧em ra膷unaru zahtjeva ``vlasni膷ke'' drajvere za "
-"rad.\n"
-"Mo啪ete na膰i vi拧e podataka o njima na: %s"
+"Da biste 拧tampali na NetWare 拧tampa膷, trebate dati naziv NetWare print "
+"servera (Pa啪nja! Ono mo啪e biti razli膷ito od njegovog TCP/IP imena!) kao i "
+"naziv reda za 拧tampu na 拧tampa膷u kojem 啪elite pristupiti i eventualno "
+"korisni膷ko ime i 拧ifru."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"膶estitamo, instalacija je zavr拧ena.\n"
-"Uklonite boot medij i pritisnite return za reboot.\n"
-"\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
-"Linuxa,\n"
-"pogledajte Errata koja je dostupna na:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informacije o pode拧avanju va拧eg sistema su dostupne u poglavlju\n"
-"\"nakon instalacije\" va拧eg Zvani膷nog Mandrake Linux priru膷nika za upotrebu."
+msgid "Netmask:"
+msgstr "Netmask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Append"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Osvje啪i listu 拧tampa膷a (kako bi bili prikazani svi dostupni CUPS 拧tampa膷i)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa bi膰e "
+"provjereno da\n"
"\n"
-"Pa啪nja\n"
-"\n"
-"Molim pro膷itajte pa啪ljivo uslove licence ispod. Ako se ne sla啪ete sa bilo\n"
-"kojim dijelom, nije vam dozvoljeno da instalirate naredni CD medij. "
-"Pritisnite\n"
-"dugme 'odbij' da biste nastavili sa instalacijom bez kori拧tenja ovog "
-"medija.\n"
-"Budu膰i da prevodilac ovog teksta nije u mogu膰nosti da osigura pravnu\n"
-"provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n"
-"obliku.\n"
+"- je instaliran LPD/LPRng, CUPS ne膰e prepisati /etc/printcap\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- postoji /etc/cups/cupsd.conf, ako ne onda 膰e biti napravljen\n"
"\n"
+"- informacije o 拧tampa膷u ne sadr啪e \"localhost\" kao ime servera prilikom "
+"broadcasta.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"Ako vam neke od ovih mjera stvaraju probleme, mo啪ete isklju膷iti ovu opciju, "
+"ali onda se morate sami brinuti da su navedeni uslovi ispunjeni."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Budu膰i da prevodilac ovog teksta nije u mogu膰nosti da osigura pravnu\n"
-"provjeru prevedenog teksta, tekst licence je ostavljen u originalnom "
-"(engleskom)\n"
-"obliku.\n"
-"\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od "
+"operativnog sistema (dostupan je na ve膰ini UNIX sistema), ali je vrlo "
+"elementaran i ograni膷en.\n"
+"Pored toga, svi OSS drajveri ponovo izmi拧ljaju to膷ak.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n"
+"podr啪ava prili膷no velik broj ISA, USB i PCI kartica.\n"
"\n"
-"5. Governing Laws \n"
+"Ona tako膽e pru啪a mnogo vi拧i API nego OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Pomo膰"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "nije pode拧eno"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Do拧lo je do gre拧ke kod instaliranja paketa:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Do拧lo je do gre拧ke pri naru膷ivanju paketa:"
+"Da biste koristili ALSA, mo啪ete koristiti:\n"
+"- stari API kompatibilan sa OSSom\n"
+"- novi ALSA API koji pru啪a mnoge napredne mogu膰nosti, ali zahtijeva upotrebu "
+"ALSA biblioteke.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Promijenite va拧 CD-ROM!\n"
+"Ova auto instalacija mo啪e biti potpuno automatizovana ako 啪elite,\n"
+"u kojem slu膷aju 膰e ona preuzeti hard disk!!\n"
+"(ovo je namjenjeno za instaliranje na drugi ra膷unar).\n"
"\n"
-"Molimo ubacite CD ozna膷en sa \"%s\" u va拧 CD-ROM ure膽aj i pritisnite \"U redu"
-"\" kad ste spremni.\n"
-"Ako ga nemate, pritisnite \"Odustani\" da biste presko膷ili instalaciju sa "
-"tog CD-ROMa."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Nema detalja"
+"Mo啪da 膰ete radije 啪eljeti ponoviti instalaciju.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detalji"
+msgid "Network printer \"%s\", port %s"
+msgstr "Mre啪ni 拧tampa膷 \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Molim sa膷ekajte, pripremam instalaciju..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Molimo izaberite koji mre啪ni adapter 膰e biti spojen na va拧u Lokalnu mre啪u."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Preostalo vremena "
+msgid "OK to restore the other files."
+msgstr "OK za vra膰anje ostalih datoteka."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Procjenjujem"
+msgid "Please choose your keyboard layout."
+msgstr "Molimo izaberite izgled va拧e tastature."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instaliram"
+msgid "Printer Device URI"
+msgstr "URI ure膽aja 拧tampa膷a"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje 啪elite instalirati"
+msgid "Not erasable media!"
+msgstr "Medij nije izbrisiv!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
+msgid "Terminal-based"
+msgstr "Terminal"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Osvje啪avam izbor paketa"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instaliram sistem za 拧tampu na sigurnosnom nivou: %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "U膷itaj/snimi na disketu"
+msgid "The user name is too long"
+msgstr "Korisni膷ko ime je preduga膷ko"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Nazad"
+msgid "Other OS (windows...)"
+msgstr "Ostali OSi (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalacija"
+msgid "WebDAV remote site already in sync!"
+msgstr "Udaljeni WebDAV sajt je ve膰 sinhroniziran!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Automatski prika啪i izabrane pakete"
+msgid "Reading printer database..."
+msgstr "膶itam bazu podataka o 拧tampa膷ima ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo啪ete isklju膷iti ovaj paket. On mora biti unaprije膽en"
+msgid "Generate auto install floppy"
+msgstr "Napravi auto instalacijsku disketu"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Ovaj paket mora biti unaprije膽en\n"
-"Jeste li sigurni da ga 啪elite isklju膷iti?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne mo啪ete isklju膷iti ovaj paket. On je ve膰 instaliran"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezan paket, ne mo啪e biti isklju膷en"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Ne mo啪ete izabrati/isklju膷iti ovaj paket"
+"\t\t korisni膷ko ime: %s\n"
+"\t\t u direktoriju: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Sljede膰i paketi 膰e biti uklonjeni"
+msgid "Somalia"
+msgstr "Somalija"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Sljede膰i paketi 膰e biti instalirani"
+msgid "No open source driver"
+msgstr "Nema open source drajver"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne mo啪ete izabrati ovaj paket jer nema dovoljno prostora za njega"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
+"Sigurnosne osobine na maksimumu."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Zna膷aj: %s\n"
+msgid "Nicaragua"
+msgstr "Nikaragva"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veli膷ina: %d KB\n"
+msgid "New Caledonia"
+msgstr "Nova Kaledonija"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Evropski protokol (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
+msgid "Video mode"
+msgstr "Video mod"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Neispravan paket"
+msgid "Please enter your email address below "
+msgstr "Molimo unesite va拧u email adresu ispod"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Ostalo"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veli膷ina: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "Nadzor mre啪e"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Dalje ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Izbor pojedina膷nih paketa"
+msgid "New size in MB: "
+msgstr "Nova veli膷ina u MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
+msgid "Partition table type: %s\n"
+msgstr "Tip tabele particija: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va拧em sistemu ponestaje resursa. Mo啪da imate neki problem sa instalacijom\n"
-"Mandrake Linuxa. Ako se ovo desi, mo啪ete poku拧ati tekstualnu instalaciju. Za "
-"ovo,\n"
-"pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'."
+msgid "Authentication Windows Domain"
+msgstr "Autentikacijska Windows domena"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
+msgid "US keyboard"
+msgstr "US tastatura"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatizovano"
+msgid "Buttons emulation"
+msgstr "Emulacija dugmeta"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Ponovi"
+msgid ", network printer \"%s\", port %s"
+msgstr ", mre啪ni 拧tampa膷 \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Ova auto instalacija mo啪e biti potpuno automatizovana ako 啪elite,\n"
-"u kojem slu膷aju 膰e ona preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugi ra膷unar).\n"
"\n"
-"Mo啪da 膰ete radije 啪eljeti ponoviti instalaciju.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Restartuj"
+"Drakbackup aktivnosti putem trake:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Neki koraci nisu dovr拧eni.\n"
"\n"
-"Da li zaista 啪elite iza膰i sada?"
+" Problem sa FTP konekcijom: Nije bilo mogu膰e poslati va拧e backup datoteke "
+"putem FTPa.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Pravim auto instalacijsku disketu..."
+msgid "Sending Speed:"
+msgstr "Brzina slanja:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u jedinicu %s"
+msgid "Halt bug"
+msgstr "Halt bug"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Mo啪da 膰ete trebati promijeniti va拧 Open Firmware boot ure膽aj\n"
-" da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, dr啪ite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idu膰eg boota biste trebali vidjeti upit bootloadera."
+msgid "Mail alert configuration"
+msgstr "Pode拧avanje Mail obavijesti"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija bootloadera nije uspjela. Do拧lo je do sljede膰e gre拧ke:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Instaliram bootloader"
+msgid "Bosnian"
+msgstr "Bosanska"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre拧ka u instaliranju aboota, \n"
-"da li da poku拧am nasilnu instalaciju 膷ak i ako to uni拧ti prvu particiju?"
+msgid "Release: "
+msgstr "Izdanje:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Da li 啪elite koristiti aboot?"
+msgid "Connection speed"
+msgstr "Brzina konekcije"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Izgleda da imate OldWorld ili Unknown ra膷unar,\n"
-" yaboot bootloader ne膰e raditi kod vas.\n"
-"Instalacija 膰e se nastaviti, ali 膰ete\n"
-" morati koristiti BootX za bootanje va拧eg ra膷unara"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Pripremam bootloader..."
+"Molim unesite naziv ure膽aja va拧eg CD Writera\n"
+" npr: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Administratorska 拧ifra domena"
+msgid "Namibia"
+msgstr "Namibija"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Korisni膷ko ime domenskog administratora"
+msgid "Database Server"
+msgstr "Server baze podataka"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows domena"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "posebne mogu膰nosti drajvera (mogu膰nost pr啪enja i/ili podr拧ka za DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autentikacijska Windows domena"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Da bi ovo radilo sa W2K PDCom, vjerovatno 膰e biti potrebno da admin izvr拧i:\n"
-" C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n"
-"i restartuje server. Tako膽e 膰e vam trebati korisni膷ko ime i 拧ifra "
-"administratora domena da biste pridru啪ili ra膷unar Windows(tm) domenu.\n"
-"Ako mre啪a jo拧 nije aktivirana, DrakX 膰e poku拧ati pristupanje domenu tek "
-"nakon 拧to pro膽ete kroz korak pode拧avanja mre啪e.\n"
-"Ako ovo pode拧avanje iz nekog razloga ne uspije i prijava na domen ne bude "
-"izvr拧ena, izvr拧ite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koriste膰i "
-"va拧u Windows(tm) domenu, kao i administratorovo korisni膷ko ime i 拧ifru nakon "
-"pokretanja sistema.\n"
-"Naredba 'wbinfo -t' 膰e provjeriti da li su va拧i podaci ispravni."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autentifikacija NIS"
+"Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje sa XFree %s,\n"
+"PA沤NJA OVO JE EKSPERIMENTALNA PODR艩KA I MO沤E ZALEDITI VA艩 RA膶UNAR.\n"
+"Va拧u karticu tako膽e podr啪ava XFree %s koji mo啪e imati bolju podr拧ku za 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Molim sa膷ekajte, pode拧avam sigurnosne opcije..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Nepoznat|CPH05X (bt878) [razni proizvo膽a膷i]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Pokreni X-Window sistem na startu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
+msgid "hourly"
+msgstr "svakog sata"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " uspje拧no spa拧eni na %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lokalne datoteke"
+msgid "Making printer port available for CUPS..."
+msgstr "Omogu膰ujem pristup 拧tampa膷u putem CUPSa..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Autentikacija"
+msgid "Antigua and Barbuda"
+msgstr "Antigua i Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Ova 拧ifra je previ拧e jednostavna (mora biti duga najmanje %d karaktera)"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No password"
-msgstr "Bez 拧ifre"
+"!!! Odre膽uje 拧ifru u sistemskoj bazi podataka koja se razlikuje\n"
+"od one u bazi podataka Terminal Servera.\n"
+"Obri拧ite i ponovo dodajte korisnika u Terminal Server da biste omogu膰ili "
+"pristup."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Podesite root 拧ifru"
+msgid "Spanish"
+msgstr "艩panska"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Niste podesili X. Sigurno 啪elite uraditi ovo?"
+msgid "Start"
+msgstr "Start"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Servisi"
+msgid "Configuring applications..."
+msgstr "Pode拧avam aplikacije..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "Sistem"
+msgid "Normal modem connection"
+msgstr "Normalna modemska konekcija"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s na %s"
+msgid "File Selection"
+msgstr "Izbor datoteka"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Koju ISDN konfiguraciju 啪elite?\n"
+"\n"
+"* Stara konfiguracija koristi isdn4net. On sadr啪i mo膰ne alate,\n"
+" ali ga je te拧ko podesiti i nije standardiziran.\n"
+"\n"
+"* Novu konfiguraciju je lak拧e razumjeti, standardnija je,\n"
+" ali ima manje alata.\n"
+"\n"
+"Preporu膷ujemo light konfiguraciju.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Boot"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "isklju膷en"
+msgid "Run config tool"
+msgstr "Pokreni alat za pode拧avanje"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiviran"
+msgid "Bootloader installation"
+msgstr "Instalacija bootloadera"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Firewall"
+msgid "Root partition size in MB: "
+msgstr "Veli膷ina root particije u MB:"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sigurnost"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Ovo je obavezan paket, ne mo啪e biti isklju膷en"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Sigurnosni nivo"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO image je %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Mre啪a"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) je Domain Name Server (DNS) koji se koristi za odre膽ivanje IP "
+"adrese iz imena ra膷unara."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Mre啪a i Internet"
+msgid "Disconnect..."
+msgstr "Prekini konekciju..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafi膷ki interfejs"
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Report"
+msgstr "Izvje拧taj"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV kartica"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije otkrivena zvu膷na kartica. Probajte \"harddrake\" poslije instalacije"
+msgid "level"
+msgstr "nivo"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili va拧u zvu膷nu "
-"karticu"
+"Sve incidente 膰e pratiti jedan kvalificiran MandrakeSoft tehni膷ki eksper."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Imate li ISA zvu膷nu karticu?"
+msgid "Package Group Selection"
+msgstr "Izbor grupe paketa"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Zvu膷na kartica"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restore putem mre啪nog protokola: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
+msgid "You can configure each parameter of the module here."
+msgstr "Ovdje mo啪ete podesiti svaki parametar modula."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Nema 拧tampa膷a"
+msgid "Choose the resolution and the color depth"
+msgstr "Izaberite rezoluciju i broj boja"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "艩tampa膷"
+msgid "Emulate third button?"
+msgstr "Emuliraj tre膰e dugme?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Mi拧"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Ne mo啪ete napraviti novu particiju\n"
+"(po拧to ste dosegli maksimalan broj primarnih particija).\n"
+"Najprije uklonite primarnu particiju i napravite extended (pro拧irenu) "
+"particiju."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Vremenska zona"
+msgid "Mount"
+msgstr "Montiraj"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Tastatura"
+msgid "Creating auto install floppy"
+msgstr "Pravim auto instalacijsku disketu"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Ukratko"
+msgid "Install updates"
+msgstr "Instaliraj update"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP server"
+msgid "text box height"
+msgstr "visina tekst polja"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koriste膰i NTP)"
+msgid "State"
+msgstr "Status"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat pode拧en na GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Provjeri da li je medij prisutan za ovaj uredjaj %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Koja je va拧a vremenska zona?"
+msgid "Enable multiple profiles"
+msgstr "Omogu膰i vi拧e profila"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "沤elite li ponovo poku拧ati?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Ove opcije mogu spasiti ili vratiti sve datoteke u va拧em /etc direktoriju.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne mogu pristupiti mirroru %s"
+msgid "Local printer"
+msgstr "Lokalni 拧tampa膷"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa..."
+msgid "Files Restored..."
+msgstr "Vra膰ene datoteke..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg 膰e biti dobavljeni paketi"
+msgid "Package selection"
+msgstr "Izbor paketa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih "
-"mirrora..."
+msgid "Mauritania"
+msgstr "Mauritanija"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Sada imate mogu膰nost da dobavite sa Interneta nove verzije paketa koji\n"
-"su iza拧li nakon 拧to je distribucija objavljena. Me膽u njima su sigurnosne "
-"zakrpe\n"
-"i ispravke bugova.\n"
+"Mogu zadr啪ati trenutnu konfiguraciju i pretpostaviti da ste ve膰 podesili "
+"DHCP server; u tom slu膷aju molim provjerite da li sam ispravno pro膷itao "
+"Mre啪nu adresu koju 膰ete koristiti na lokalnoj mre啪i; ne膰u je ponovo podesiti "
+"i ne膰u mijenjati va拧e postavke DHCP servera.\n"
"\n"
-"Da biste izvr拧ili download, potrebno je da podesite Internet konekciju.\n"
+"Predlo啪ena DNS postavka je Caching nameserver koji je pode拧en na firewallu. "
+"Mo啪ete je zamijeniti npr. IP adresom DNS servera va拧eg ISPa.\n"
+"\t\t \n"
+"Ako ne, mogu ponovo podesiti va拧 interfejs i podesiti DHCP server za vas.\n"
"\n"
-"Da li 啪elite instalirati update-ovane pakete ?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molimo ubacite boot disketu koju ste koristili u jedinicu %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Nije prona膽en nijedan lokalni 拧tampa膷! Ako 啪elite ru膷no instalirati 拧tampa膷, "
+"unesite ime ure膽aja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
+"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB 拧tampa膷: /dev/"
+"usb/lp0, drugi USB 拧tampa膷: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko pode拧avanje"
+msgid "All primary partitions are used"
+msgstr "Sve primarne particije su u upotrebi"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
+"Nakon 拧to je to gotovo, preporu膷ujemo da restartujete va拧 X\n"
+"okoli拧 kako bi se izbjegao problem sa promjenom naziva ra膷unara."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Automatsko prepoznavanje i pode拧avanje hardware-a tokom boota."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
+msgid "Installation Server Configuration"
+msgstr "Pode拧avanje instalacionog servera"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na Ok.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isklju膷ite ih, zatim kliknite na Ok."
+msgid "Configuring IDE"
+msgstr "Pode拧avam IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Svi"
+msgid "Network functionality not configured"
+msgstr "Mre啪na funkcionalnost nije pode拧ena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
+msgid "Configure module"
+msgstr "Podesi modul"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporu膷eno)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokosova ostrva"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Sa X-om"
+msgid "Disconnecting from the Internet "
+msgstr "Prekidam vezu na Internet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+msgid "You'll need to reboot before the modification can take place"
msgstr ""
-"Niste izabrali nijednu grupu paketa\n"
-"Molimo izaberite minimalnu instalaciju koju 啪elite:"
+"Bi膰e potrebno da rebootate prije nego 拧to izmjene mogu stupiti na snagu"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Vrsta instalacije"
+msgid "Provider phone number"
+msgstr "Broj telefona provajdera"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veli膷ina je ve膰a od slobodnog prostora"
+msgid "Host %s"
+msgstr "Ra膷unar %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadr啪i izbor paketa"
+msgid "Armenia"
+msgstr "Armenija"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "U膷itavam sa diskete"
+msgid "Fiji"
+msgstr "Fid啪i"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Izbor paketa"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Spasi na disketu"
+msgid "Second floppy drive"
+msgstr "Druga disketna jedinica"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "U膷itaj sa diskete"
+msgid "About Harddrake"
+msgstr "O Harddrake-u"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite u膷itaj ili spasi izbor paketa na disketu.\n"
-"Format je isti kao i diskete koje generi拧e auto_install."
+msgid "Drive capacity"
+msgstr "Kapacitet ure膽aja"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Va拧 sistem nema dovoljno preostalog prostora za instalaciju ili unaprje膽enje "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Tra啪im dostupne pakete..."
+"Ubacite disketu u jedinicu\n"
+"Svi podaci na toj disketi 膰e biti izgubljeni"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Pronalazim pakete za unaprje膽enje..."
+msgid "Size: %s"
+msgstr "Veli膷ina: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Tra啪im ve膰 instalirane pakete..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Control i Shift tipka istovremeno"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Tra啪im dostupne pakete i izgra膽ujem rpm bazu podataka..."
+msgid "secondary"
+msgstr "sekundarni"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Nemam dovoljno swap prostora da dovr拧im instalaciju, molimo dodajte jo拧"
+msgid "View Backup Configuration."
+msgstr "Pogledaj postavke backupa."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Nisam uspio provjeriti datote膷ni sistem %s. 沤elite li popraviti gre拧ke? "
-"(pa啪nja, mo啪ete izgubiti podatke)"
+msgid "if set to yes, report check result to syslog."
+msgstr "ako je postavljeno na da, prijavljuje rezultate provjere u syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Provjeri lo拧e blokove?"
+msgid "No password"
+msgstr "Bez 拧ifre"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje 啪elite formatirati"
+msgid "Nigeria"
+msgstr "Nigerija"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Mora膰ete rebootati da bi izmjene tabele particija stupile na snagu"
+msgid "There is no existing partition to use"
+msgstr "Nema nijedne postoje膰e particije za upotrebu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija 膰e "
-"nastaviti, ali da biste bootali va拧 sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Izaberite ta膷ke montiranja"
+"Sljede膰i skeneri\n"
+"\n"
+"%s\n"
+"su dostupni na va拧em sistemu.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Pretra啪ujem particije da na膽em ta膷ke montiranja"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Da biste 拧tampali na TCP ili socket 拧tampa膷, morate dati hostname ili IP "
+"adresu 拧tampa膷a i opcionalno broj porta (podrazumjeva se 9100). Na HP "
+"JetDirect serverima broj porta je obi膷no 9100, na ostalim serverima on mo啪e "
+"varirati. Pogledajte priru膷nik va拧eg hardware-a."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Nema dostupnih particija"
+msgid "Hard drive information"
+msgstr "Informacije o hard disku"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Pode拧avam IDE"
+msgid "Russian"
+msgstr "Ruska"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Jordan"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Pode拧avam PCMCIA kartice..."
+msgid "Hide files"
+msgstr "Sakrij datoteke"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Automatski prepoznaj 拧tampa膷e spojene na ovaj ra膷unar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV nije instaliran!\n"
+"\n"
+"\n"
+"Ako imate TV karticu ali je DrakX nije prepoznao (ni bttv ni saa7134 modul "
+"se ne\n"
+"nalaze u \"/etc/modules\") niti je instalirao XawTV, molim po拧aljite "
+"rezultate naredbe\n"
+"\"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\" sa naslovom "
+"\"undetected\n"
+"TV card\".\n"
+"\n"
+"\n"
+"Mo啪ete instalirati XawTV kucaju膰i \"urpmi xawtv\" na konzoli kao root."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
+msgid "Sorry, no floppy drive available"
+msgstr "沤ao mi je, nema disketne jedinice"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulacija dugmeta"
+msgid "Bolivia"
+msgstr "Bolivija"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Molimo izaberite na kojem serijskom portu je spojen va拧 mi拧."
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Podesite va拧 Windows server tako da je 拧tampa膷 dostupan putem IPP protokola "
+"i podesite 拧tampanje sa ove ma拧ine koriste膰i \"%s\" tip konekcije u "
+"Printerdrake-u.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Port mi拧a"
+msgid "Bad package"
+msgstr "Neispravan paket"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Molimo izaberite vrstu va拧eg mi拧a."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Pretvorite va拧 ra膷unar u mo膰an Linux server: Web server, email, firewall, "
+"file i print server (itd.) su udaljeni samo nekoliko klikova mi拧em!"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Klju膷 enkripcije za %s"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec osnovne opcije"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Unaprijedi %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Napomena: ako imate ISA PnP zvu膷nu karticu, mora膰ete koristiti sndconfig "
+"program. Samo ukucajte \"sndconfig\" na konzoli."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Da li je ovo instalacija ili unaprje膽enje?"
+msgid "Romania"
+msgstr "Rumunija"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instaliraj/Unaprijedi"
+msgid "choose device"
+msgstr "izaberite ure膽aj"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Molimo izaberite izgled va拧e tastature."
+msgid "Remove from LVM"
+msgstr "Ukloni sa LVMa"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Izlaz"
+msgid "Timezone"
+msgstr "Vremenska zona"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Licencni ugovor"
+msgid "German"
+msgstr "Njema膷ka"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Do拧lo je do gre拧ke"
+msgid "Next ->"
+msgstr "Dalje ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> izme膽u elemenata | <Space> vr拧i izbor | <F12> idu膰i ekran "
+"Ako ovo uklju膷ite, mo膰i 膰ete 拧tampati obi膷ne tekstualne datoteke na "
+"japanskom jeziku. Koristite ovu funkciju samo ako zaista 啪elite 拧tampati "
+"japanski tekst, jer kada je aktivirana, vi拧e ne mo啪ete 拧tampati znakove sa "
+"akcentima u latini膷nim fontovima (npr. na拧a slova). Tako膽e ne膰ete mo膰i "
+"prilagoditi margine, veli膷ine znakova, itd. Ova postavka 膰e utjecati samo na "
+"拧tampa膷e koji su definisani na ovom ra膷unaru. Ako 啪elite 拧tampati japanski "
+"tekst na udaljenom ra膷unaru, trebate aktivirati ovu funkciju na tom ra膷unaru."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Postoji mogu膰nost da je ova\n"
+"particija Driver particija. Vjerovatno\n"
+"biste je trebali ostaviti na miru.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Nema pogodne disketne jedinice"
+msgid "Guinea-Bissau"
+msgstr "Gvineja Bisau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro do拧li u %s"
+msgid "Horizontal refresh rate"
+msgstr "Brzina horizontalnog osvje啪avanja"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je neispravan va拧 cdrom ure膽aj ili va拧 cdrom medij.\n"
-"Provjerite cdrom na instaliranom ra膷unaru koriste膰i \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka ta膷ka montiranja %s"
+"Ne mogu izmjeniti ta膷ku montiranja jer se ova particija koristi za "
+"loopback.\n"
+"Najprije uklonite loopback"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Do拧lo je do gre拧ke, ali ne znam kako da je rije拧im fino.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Molimo sa膷ekajte"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "Osnovno"
+"Pode拧avanje mre啪e koje je napravljeno tokom instalacije sada ne mo啪e biti "
+"pokrenuto. Molim provjerite da li 膰e mre啪a postati dostupna nakon bootanja "
+"sistema i popravite pode拧enja koriste膰i Mandrake Kontrolni centar, sekcija "
+"\"Mre啪a i Internet\"/\"Konekcija\", a zatim podesite 拧tampa膷, ponovo "
+"koriste膰i Mandrake Kontrolni centar, sekcija \"Hardver\"/\"艩tampa膷\""
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Napredno"
+msgid "USB controllers"
+msgstr "USB kontroleri"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Pobri拧i"
+msgid "What norm is your TV using?"
+msgstr "Koji standard koristi va拧 TV?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Izmijeni"
+msgid "Type:"
+msgstr "Tip:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Dodaj"
+msgid "Share name"
+msgstr "Share naziv"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
+msgid "enable"
+msgstr "uklju膷i"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Ovdje mo啪ete izabrati tipku ili kombinaciju tipki koja 膰e\n"
-"izvr拧iti prebacivanje izme膽u raznih rasporeda tastature\n"
-"(npr: latini膷ni i ne-latini膷ni)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Meni\" tipka"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipke istovremeno"
+"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih "
+"mirrora..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istovremeno"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Do拧lo je do problema prilikom restartovanja mre啪e:\n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
+msgid "Remove the loopback file?"
+msgstr "Ukloniti loopback datoteku?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipka istovremeno"
+msgid "Selected size is larger than available space"
+msgstr "Izabrana veli膷ina je ve膰a od slobodnog prostora"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Obje Shift tipke istovremeno"
+msgid "NCP server name missing!"
+msgstr "NCP naziv servera nedostaje!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
+msgid "Please choose your country."
+msgstr "Molim izaberite va拧u zemlju."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latini膷no)"
+msgid "Hard Disk Backup files..."
+msgstr "Datoteke backup-a hard diska..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"red brojeva\" QWERTY"
+msgid "Laotian"
+msgstr "Laoska"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US tastatura (me膽unarodna)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US tastatura"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Rstat protokol omogu膰ava korisnicima na mre啪i da dobave\n"
+"mjeru performansi za svaki ra膷unar na toj mre啪i"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK tastatura"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Regeneriram listu pode拧enih skenera ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrajinska"
+msgid "Scanner"
+msgstr "Skener"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Upozorenje: testiranje ove grafi膷ke karte mo啪e zalediti ra膷unar"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Korisni膷ko ime smije sadr啪ati samo mala slova, brojeve, `-' i `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tad啪i膷ka tastatura"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Tajlandska tastatura"
+msgid "Welcome To Crackers"
+msgstr "Dobrodo拧li u Crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamilska (pisa膰a ma拧ina)"
+msgid "Module options:"
+msgstr "Opcije modula"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamilska (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Za拧titite va拧u mre啪u uz Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (膰irilica)"
+msgid "Go on without configuring the network"
+msgstr "Nastavi bez pode拧avanja mre啪e"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slova膷ka (QWERTY)"
+msgid "Abort"
+msgstr "Prekid"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slova膷ka (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Nema upita za 拧ifru na %s na portu %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovena膷ka"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Molim uklju膷ite ako 啪elite koristiti non-rewinding ure膽aj."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "艩vedska"
+msgid "Usage of remote scanners"
+msgstr "Upotreba udaljenih skenera"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ruska"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Va拧a Windows particija je previ拧e fragmentirana. Molim restartujte va拧 "
+"ra膷unar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandrake "
+"Linux instalaciju."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumunska (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norve拧ka)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumunska (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Napredak backup-a hard diska..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
+msgid "Unable to fork: %s"
+msgstr "Ne mogu izvrsiti fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugalska"
+msgid "Type: "
+msgstr "Tip: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz)"
+msgid "<-- Edit Client"
+msgstr "<-- Izmijeni klijent"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty)"
+msgid "no fonts found"
+msgstr "nije prona膽en nijedan font"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norve拧ka"
+msgid "Mouse"
+msgstr "Mi拧"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holandska"
+msgid "not enough room in /boot"
+msgstr "nema dovoljno prostora u /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malte拧ka (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "Slobodan izbor drajvera"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malte拧ka (UK)"
+msgid "Host name"
+msgstr "Host name"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolska (膰irilica)"
+msgid "Liechtenstein"
+msgstr "Lihten拧tajn"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Mjanmarska (Burmanska)"
+msgid "the color of the progress bar"
+msgstr "boja progresne trake"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonska"
+msgid "Suppress Fonts Files"
+msgstr "Onemogu膰i datoteke fontova"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Dodaj na RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latvijska"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "艩tampa膷 \"%s\" je uspje拧no dodan u Star Office/OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Nema pogodne disketne jedinice!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanska AZERTY (nova)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Za listu opcija koje su dostupne za trenutni 拧tampa膷 ili pro膷itajte listu "
+"koja je data ispod ili kliknite na dugme \"Lista opcija za 拧tampu\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
+msgid "Continue anyway?"
+msgstr "Svejedno nastavljate?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laoska"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Ako 拧tampa膷 nije naveden, izaberite kompatibilan (pogledajte uputstva za "
+"拧tampa膷) ili sli膷an."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latino-Ameri膷ka"
+msgid "Printer"
+msgstr "艩tampa膷"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
+msgid "Saudi Arabia"
+msgstr "Saudijska Arabija"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanska 106 tipki"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Dodani su neki ure膽aji:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italijanska"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandska"
+msgid "Printing on the printer \"%s\""
+msgstr "艩tampam na 拧tampa膷 \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iranska"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow i /etc/hosts.deny su ve膰 pode拧eni - bez izmjene"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
+msgid "Restore From Tape"
+msgstr "Vrati sa trake"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Izraelska"
+msgid "Choose the profile to configure"
+msgstr "Izaberite profil za pode拧avanje"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Hrvatska"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Unesite Zeroconf ime ra膷unara bez ta膷aka ako ne 啪elite\n"
+"da koristite ponu膽eno ime ra膷unara."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ma膽arska"
+msgid "Backup Now from configuration file"
+msgstr "Backup-uj sada iz konfiguracijske datoteke"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Ta膷ka montiranja se treba sastojati samo od brojeva i slova"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Restartujem sistem za 拧tampu ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Gr膷ka"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"latini膷ni\" izgled)"
+msgid "See hardware info"
+msgstr "Pogledaj hardware info"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"ruski\" izgled)"
+msgid "First sector of boot partition"
+msgstr "Prvi sektor boot particije"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Francuska"
+msgid "Printer manufacturer, model"
+msgstr "Proizvo膽a膷 拧tampa膷a, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finska"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "艩panska"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Pode拧avanje Mandrake Terminal Servera\n"
+"--enable : omogu膰i MTS\n"
+"--disable : onemogu膰i MTS\n"
+"--start : pokreni MTS\n"
+"--stop : zaustavi MTS\n"
+"--adduser : dodaj postoje膰eg sistemskog korisnika MTSu (potrebno je "
+"korisni膷ko ime)\n"
+"--deluser : obri拧i postoje膰eg sistemskog korisnika sa MTSa (potrebno "
+"je korisni膷ko ime)\n"
+"--addclient : dodaj klijentski ra膷unar MTSu (potrebna je MAC adresa, "
+"IP, nbi image ime)\n"
+"--delclient : obri拧i klijentski ra膷unar sa MTSa (potrebna je MAC "
+"adresa, IP, nbi image ime)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonska"
+msgid "Subnet Mask:"
+msgstr "Subnet mask:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (艩vedska)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Uspje拧na instalacija LiLo i Boot tema"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve拧ka)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Dva kriti膷na parametra su brzina vertikalnog osvje啪enja, 拧to je brzina\n"
+"kojom se cijeli ekran osvje啪ava, i brzina horizontalne\n"
+"sinhronizacije, 拧to je brzina kojm se prikazuju skan-linije.\n"
+"\n"
+"VEOMA JE VA沤NO da ne izaberete tip monitora 膷iji je sinhronizacioni\n"
+"raspon izvan mogu膰nosti va拧eg monitora: time mo啪ete o拧tetiti monitor.\n"
+" Ako niste sigurni, izaberite najmanju opciju."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "Izmijeni"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danska"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Komande \"%s\" i \"%s\" tako膽er omogu膰avaju izmjenu opcija za pojedina膷ni "
+"zadatak 拧tampe. Jednostavno dodajte 啪eljena pode拧enja na komandnu liniju, "
+"npr. \"%s <datoteka>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Potrebno ime ra膷unara, korisni膷ko ime i 拧ifra!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Njema膷ka (bez mrtvih tipki)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV je protokol koji vam omogu膰uje da direktorij web servera\n"
+"montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n"
+"je web server pode拧en kao WebDAV server). Ako 啪elite dodati WebDAV\n"
+"ta膷ke montiranja, izaberite \"Novi\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Njema膷ka"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "膶e拧ka (QWERTY)"
+msgid "new"
+msgstr "novi"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "膶e拧ka (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "沤elite li ponovo poku拧ati?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "艩vicarska (francuski izgled)"
+msgid "Wizard"
+msgstr "膶arobnjak"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "艩vicarska (njema膷ki izgled)"
+msgid "Edit selected server"
+msgstr "Izmijeni izabrani server"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Bjeloruska"
+msgid "Please choose where you want to backup"
+msgstr "Molimo izaberite gdje 啪elite backupovati"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosanska"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Mora膰ete rebootati da bi izmjene tabele particija stupile na snagu"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Ne uklju膷uj spremnik web preglednika"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Molimo izaberite izgled va拧e tastature."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
+msgid "Standard"
+msgstr "Standard"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengalska"
+msgid "Please choose your mouse type."
+msgstr "Molimo izaberite vrstu va拧eg mi拧a."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgijska"
+msgid "Connect..."
+msgstr "Konektuj se..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejd啪anska (latinica)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Nisam uspio podesiti 拧tampa膷 \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arapska"
+msgid "not configured"
+msgstr "nije pode拧eno"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisa膰a ma拧ina)"
+msgid "About"
+msgstr "O programu"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
+msgid "Proxies configuration"
+msgstr "Konfiguracija proxija"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albanska"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Poljska"
+msgid "Start: sector %s\n"
+msgstr "Po膷etak: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Mre啪ni interfejs je ve膰 pode拧en"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
+msgid "Couldn't access the floppy!"
+msgstr "Ne mogu pristupiti disketi!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambija"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "spajam se na Bugzilla 膷arobnjak..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Ju啪na Afrika"
+msgid "Mail Server"
+msgstr "Mail server"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Srbija"
+msgid "Please click on a partition"
+msgstr "Molimo kliknite na particiju"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Jemen"
+msgid "Have a nice day!"
+msgstr "Have a nice day!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "preko mre啪e"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis i Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Unaprijedi %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vijetnam"
+msgid "Select Printer Connection"
+msgstr "Izaberi konekciju 拧tampa膷a"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Djevi膷anska ostrva (SAD)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Pretraga TV kanala je u toku ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Djevi膷anska ostrva (Britanska)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Gre拧ka tokom slanja datoteke preko FTPa.\n"
+" Molimo ispravite va拧u FTP konfiguraciju."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venecuela"
+msgid "IP Range Start:"
+msgstr "Po膷etak IP raspona:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent and the Grenadines"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver (obi膷no nazvan inetd) pokre膰e razne druge Internet\n"
+"servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao 拧to su\n"
+"telnet, ftp, rsh i rlogin. Isklju膷ivanje inetd-a isklju膷uje sve servise za "
+"koje je\n"
+"on nadle啪an."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
+msgid "the height of the progress bar"
+msgstr "visina progresne trake"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Spasi pomo膰u %s na ra膷unaru: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Urugvaj"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "DNS server"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
+msgid "Security Level:"
+msgstr "Nivo sigurnosti:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzanija"
+msgid "Mount points must begin with a leading /"
+msgstr "Ta膷ke montiranja moraju po膷injati sa /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Tajvan"
+msgid "Postfix Mail Server"
+msgstr "Postfix mail server"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Izlaz bez spa拧avanja"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad i Tobago"
+msgid "Yemen"
+msgstr "Jemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Turska"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
+"Ovaj proizvod je dostupan na web stranici MandrakeStore (Mandrake "
+"prodavnica)."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Molim unesite maksimalnu veli膷inu\n"
+" dozvoljenu za Draxbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunis"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Postoji mnogo stvari od kojih mo啪ete izabrati (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Hard drive detection"
+msgstr "Prepoznavanje hard diska"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Isto膷ni Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Niste izabrali nijednu grupu paketa\n"
+"Molimo izaberite minimalnu instalaciju koju 啪elite:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Molim unesite URL WebDAV servera"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tad啪ikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tajland"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Francuske Ju啪ne Teritorije"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "膶ad"
+msgid "Accept"
+msgstr "Prihvati"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks i Caicos ostrva"
+msgid "Description"
+msgstr "Opis"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svazilend"
+msgid "Error opening %s for writing: %s"
+msgstr "Gre拧ka u otvaranju %s za pisanje: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Sirija"
+msgid "Mouse type: %s\n"
+msgstr "Vrsta mi拧a: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje sa XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome i Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Molimo izaberite veli膷inu va拧eg CD/DVD medija (Mb)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalija"
+msgid "Expert Area"
+msgstr "Ekspert podru膷je"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Izaberite monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Prazna oznaka nije dozvoljena"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Malte拧ka (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slova膷ka"
+msgid "I can't add any more partition"
+msgstr "Ne mogu dodati vi拧e particija"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen ostrva"
+msgid "Size in MB: "
+msgstr "Veli膷ina u MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenija"
+msgid "Remote printer"
+msgstr "Udaljeni 拧tampa膷"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Please choose a language to use."
+msgstr "Molimo izaberite jezik koji 膰ete koristiti."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"UPOZORENJE: Ovaj ure膽aj je prethodno pode拧en za konekciju na Internet.\n"
+"Samo prihvatite kako bi ovaj ure膽aj ostao pode拧en.\n"
+"Izmjena polja ispod 膰e prepisati ovu konfiguraciju."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Mogu podesiti va拧 ra膷unar da automatski prijavi jednog korisnika."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Sej拧elska ostrva"
+msgid "Floppy format"
+msgstr "Format diskete"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomonska ostrva"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudijska Arabija"
+msgid "Generic Printers"
+msgstr "Razni 拧tampa膷i"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Molimo izaberite 拧tampa膷 kojem 啪elite slati zadatke 拧tampe ili unesite naziv "
+"ure膽aja / naziv datoteke na ulaznoj liniji"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusija"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Skeneri na ovom ra膷unari su dostupni drugim ra膷unarima"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rumunija"
+msgid "First sector of the root partition"
+msgstr "Prvi sektor root particije"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Alternative drivers"
+msgstr "Alternativni drajveri"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Katar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Molimo uklju膷ite sve potrebne opcije.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paragvaj"
+msgid "Cape Verde"
+msgstr "Zelenortska ostrva"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Da li ovaj CPU ima Cyrix 6x86 Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Rani Pentium procesori imaju bug koji izaziva smrzavanje sistema prilikom "
+"dekodiranja F00F bytecode-a"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Portoriko"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Molimo izaberite port na koji je va拧 拧tampa膷 povezan ili unesite naziv "
+"ure膽aja / naziv datoteke na ulaznoj liniji"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre and Miquelon"
+msgid "/Options/Test"
+msgstr "/Opcije/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Poljska"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Ovaj nivo treba koristiti pa啪ljivo. On 膷ini va拧 sistem lak拧im za upotrebu,\n"
+"ali vrlo osjetljivim: ne smije biti kori拧ten za ra膷unar koji je spojen na\n"
+"druge ili na Internet. Nema pristupa 拧ifrom."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Mounting partition %s"
+msgstr "Montiram particiju %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filipini"
+msgid "User name"
+msgstr "Korisni膷ko ime"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Gvineja"
+msgid "New configuration (isdn-light)"
+msgstr "Nova konfiguracija (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Francuska Polinezija"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Koju particiju 啪elite koristiti za Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Backup sistema"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Testna stranica"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Novi Zeland"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Lista podataka za vra膰anje:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Provjeravam %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/socket opcije 拧tampa膷a"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Memorija kartice (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragva"
+msgid "France"
+msgstr "Francuska"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigerija"
+msgid "browse"
+msgstr "pregledaj"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk ostrvo"
+msgid "Checking installed software..."
+msgstr "Provjeravam instalirani software..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Ime udaljenog 拧tampa膷a nedostaje!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nova Kaledonija"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Da li 啪elite da omogu膰ite 拧tampanje na 拧tampa膷ima u lokalnoj mre啪i?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibija"
+msgid "Turkey"
+msgstr "Turska"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambik"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malezija"
+msgid "Number of buttons"
+msgstr "Broj dugmadi"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Meksiko"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vijetnamska \"red brojeva\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malavi"
+msgid "Module"
+msgstr "Modul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldivi"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
+"configure\" ne mogu biti premje拧teni."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauricijus"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl i Alt tipke istovremeno"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "SAD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritanija"
+msgid "Default OS?"
+msgstr "Podrazumjevani OS?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinik"
+msgid "Swiss (German layout)"
+msgstr "艩vicarska (njema膷ki izgled)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Sjeverna Marijanska ostrva"
+msgid "Configure all heads independently"
+msgstr "Konfiguri拧i sve glave odvojeno"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolija"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Molim odaberite 拧tampa膷 koji 啪elite podesiti. Pode拧avanje 拧tampa膷a 膰e raditi "
+"potpuno automatski. Ako va拧 拧tampa膷 nije ispravno prepoznat ili ako 啪elite "
+"sami podesiti 拧tampa膷, uklju膷ite \"Ru膷no pode拧avanje\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "U膷itaj/snimi na disketu"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonija"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Ova tema jo拧 nema bootsplash u %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Mar拧alova ostrva"
+msgid "nice"
+msgstr "fino"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "Napu拧tam za %d sekundi"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Molimo izaberite na koji serijski port je naka膷en va拧 modem."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Country"
+msgstr "Zemlja"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+msgid "Property"
+msgstr "Osobina"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libija"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Latvija"
+msgid "LAN Configuration"
+msgstr "Pode拧avanje LANa"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburg"
+msgid "Ghana"
+msgstr "Gana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Litvanija"
+msgid "Path or Module required"
+msgstr "Potrebna je staza ili modul"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "Advanced Options"
+msgstr "Napredne opcije"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberija"
+msgid "Coma bug"
+msgstr "Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "艩ri Lanka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"At this point, you need to choose what partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have been already\n"
+"defined, either from a previous installation of GNU/Linux or from another\n"
+"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
+"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"Clear all\": this option deletes all partitions on the selected hard\n"
+"drive.\n"
+"\n"
+" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
+"and swap partitions in free space of your hard drive.\n"
+"\n"
+" * \"More\": gives access to additional features:\n"
+"\n"
+" * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step.\n"
+"\n"
+" * \"Restore partition table\": allows to restore a previously saved\n"
+"partition table from floppy disk.\n"
+"\n"
+" * \"Rescue partition table\": if your partition table is damaged, you "
+"can\n"
+"try to recover it using this option. Please be careful and remember that it\n"
+"can fail.\n"
+"\n"
+" * \"Reload partition table\": discards all changes and load your "
+"initial\n"
+"partitions table.\n"
+"\n"
+" * \"removable media automounting\": unchecking this option will force "
+"users\n"
+"to manually mount and unmount removable medias such as floppies and\n"
+"CD-ROMs.\n"
+"\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition "
+"your\n"
+"hard drive. This is recommended if you do not have a good knowledge of\n"
+"partitioning.\n"
+"\n"
+" * \"Undo\": use this option to cancel your changes.\n"
+"\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on "
+"partitions\n"
+"(Type, options, format) and gives more information.\n"
+"\n"
+" * \"Done\": when you have finished partitioning your hard drive, this will\n"
+"save your changes back to disc.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
+"\n"
+" * Ctrl-d to delete a partition;\n"
+"\n"
+" * Ctrl-m to set the mount point.\n"
+"\n"
+"To get information about the different filesystem types available, please\n"
+"read the chapter ext2fs from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
+"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Lihten拧tajn"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Grafi膷ka kartica\n"
+"\n"
+" Instalacija sada mo啪e normalno prepoznati i podesiti grafi膷ku karticu\n"
+"koja je instalirana na va拧em ra膷unaru. Ako se to ne desi, mo啪ete\n"
+"izabrati na ovoj listi karticu koju ustvari posjedujete.\n"
+"\n"
+" U slu膷aju da postoji vi拧e dostupnih servera za va拧u karticu, sa ili bez\n"
+"3D ubrzanja, bi膰e vam predlo啪en izbor servera koji najbolje odgovara\n"
+"va拧im potrebama."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "There was an error installing packages:"
+msgstr "Do拧lo je do gre拧ke kod instaliranja paketa:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Liban"
+msgid "Lexmark inkjet configuration"
+msgstr "Pode拧avanje Lexmark inkjet-a"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Poni拧ti"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazahstan"
+msgid "Save partition table"
+msgstr "Snimi tabelu particija"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmanska ostrva"
+msgid "Finnish"
+msgstr "Finska"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
+msgid "Macedonia"
+msgstr "Makedonija"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Koreja"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
+"Mo啪ete dodavati korisnike u ovu grupu pomo膰u userdrake-a."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Koreja (Sjeverna)"
+msgid "Slovenian"
+msgstr "Slovena膷ka"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts and Nevis"
+msgid "Libya"
+msgstr "Libija"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Komori"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Pode拧avam skripte, instaliram software, pokre膰em servere..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Pr啪i na CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambo膽a"
+msgid "Table"
+msgstr "Tabela"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgistan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ne znam kako formatirati %s kao tip %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenija"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordan"
+msgid "Stop Server"
+msgstr "Zaustavi server"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Izaberite temu za\n"
+"lilo i boot ekran,\n"
+"mo啪ete ih odvojeno\n"
+"izabrati"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britansko-Indijska morska teritorija"
+msgid "Use auto detection"
+msgstr "Koristi auto prepoznavanje"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Indija"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM dodaje podr拧ku za mi拧a tekstualnim aplikacijama kao 拧to je\n"
+"Midnight Commander. On tako膽er omogu膰uje konzolne isjeci/umetni operacije\n"
+"pomo膰u mi拧a i uklju膷uje podr拧ku za pop-up menije na konzoli."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Izrael"
+msgid "Started on boot"
+msgstr "Pokrenut na bootu"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irska"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Pridru啪ite se MandrakeSoftovom support teamu i Linux zajednici na Internetu, "
+"podijelite va拧e znanje i pomozite drugima i tako postanite priznat Expert na "
+"na拧em online tech support sajtu:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonezija"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Mo啪ete podesiti sljede膰e opcije kako biste prilagodili\n"
+"sigurnost va拧eg sistema. Ako vam je potrebno obja拧njenje, pogledajte pomo膰 u "
+"tooltipu.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Ma膽arska"
+msgid "Automatically find available printers on remote machines"
+msgstr "Automatski prona膽i dostupne 拧tampa膷e na udaljenim ra膷unarima"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Spasi na traku na ure膽aju: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Hrvatska"
+msgid "East Timor"
+msgstr "Isto膷ni Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Bri拧i profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard ostrvo i McDonaldova ostrva"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Instaliram Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Kina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Molimo izvr拧ite logout i zatim koristitite Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Gvajana"
+msgid "detected"
+msgstr "detektovan"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineja Bisau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Potrebno je restartovati mre啪u. 沤elite li je restartovati?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Paket:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Gvatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Ne mogu pisati u /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia i South Sandwich ostrva"
+msgid "SECURITY WARNING!"
+msgstr "SIGURNOSNO UPOZORENJE!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorijalna Gvineja"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadalupe"
+msgid "No, I don't want autologin"
+msgstr "Ne, ne 啪elim da se autologiram"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Gvineja"
+msgid "Windows Migration tool"
+msgstr "Alat za Windows migraciju"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambija"
+msgid "All languages"
+msgstr "Svi jezici"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Grenland"
+msgid "Removing %s"
+msgstr "Uklanjam %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Probavam va拧u konekciju..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Gana"
+msgid "Cache size"
+msgstr "Veli膷ina cache-a"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Francuska Gvajana"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"艩ifra je sada aktivirana, ali kori拧tenje za mre啪ni ra膷unar jo拧 nije "
+"preporu膷eno."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Gruzija"
+msgid "Start sector: "
+msgstr "Po膷etni sektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Ujedinjeno Kraljevstvo"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Paket %s treba biti instaliran. Da li ga 啪elite instalirati?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Sej拧elska ostrva"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Farska ostrva"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
+"prepoznavanja 拧tampa膷a sa modelima koji su navedeni u njegovoj bazi podataka "
+"kako bi na拧ao najbli啪i. Ovaj izbor mo啪da nije ta膷an, pogotovo ako va拧 "
+"拧tampa膷 uop拧te nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
+"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
+"\"Izaberite model ru膷no\" kako biste ru膷no izabrali va拧 model 拧tampa膷a na "
+"sljede膰em ekranu.\n"
+"\n"
+"Za va拧 拧tampa膷 Printerdrake je na拧ao:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Bad password on %s"
+msgstr "Pogre拧na 拧ifra na %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandsko oto膷je"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Na va拧 sistem je direktno spojen jedan nepoznat 拧tampa膷"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fid啪i"
+msgid "Zambia"
+msgstr "Zambija"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finska"
+msgid "Security Administrator (login or email)"
+msgstr "Sigurnosni administrator (login ili email)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopija"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "沤alim, podr啪avamo samo 2.4 kernele."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "艩panija"
+msgid "Romanian (qwerty)"
+msgstr "Rumunska (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritreja"
+msgid "Under Devel ... please wait."
+msgstr "U izradi ... molim sa膷ekajte."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Zapadna Sahara"
+msgid "Czech Republic"
+msgstr "膶e拧ka"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egipat"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonija"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Al啪ir"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanska Republika"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominika"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danska"
+msgid "Old configuration (isdn4net)"
+msgstr "Stara konfiguracija (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "D啪ibuti"
+msgid "Sound card"
+msgstr "Zvu膷na kartica"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Kipar"
+msgid "Import Fonts"
+msgstr "Uvoz fontova"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Uskr拧nje ostrvo"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Imate jednu veliku Microsoft Windows particiju.\n"
+"Predla啪em da najprije promijenite veli膷inu te particije\n"
+"(kliknite na nju, zatim na \"Promijeni veli膷inu\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Zelenortska ostrva"
+msgid "Suppress Temporary Files"
+msgstr "Onemogu膰i privremene datoteke"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Change partition type"
+msgstr "Izmjena tipa particije"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbija"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Rezolucija\n"
+"\n"
+" Mo啪ete izabrati rezolucije i broj boja me膽u vrijednostima koje su "
+"mogu膰e\n"
+"na va拧em hardveru. Izaberite one vrijednosti koje vam najbolje odgovaraju\n"
+"(mo膰i 膰ete ih promijeniti nakon instalacije). Primjer izabrane konfiguracije "
+"je\n"
+"prikazan na monitoru."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Network Options"
+msgstr "Mre啪ne opcije"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "膶ile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Tema prikaza\n"
+"pod konzolom"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook ostrva"
+msgid "Statistics"
+msgstr "Statistika"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Obala Slonova膷e"
+msgid "(on %s)"
+msgstr "(na %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "艩vicarska"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centralnoafri膷ka Republika"
+msgid "average"
+msgstr "prosjek"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "New printer name"
+msgstr "Novo ime 拧tampa膷a"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosova ostrva"
+msgid "Equatorial Guinea"
+msgstr "Ekvatorijalna Gvineja"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Izgradi backup"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Bjelorusija"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Za 拧tampanje datoteke sa komandne linije (terminalski prozor) koristite "
+"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Bocvana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Trenutno nije dostupna nijedna alternativa"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Ostrvo Bouvet"
+msgid "Romanian (qwertz)"
+msgstr "Rumunska (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid "Write Config"
+msgstr "Zapi拧i konfiguraciju"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahami"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed demon omogu膰uje da se automatska IP tabela rutiranja pode拧ava\n"
+"preko RIP protokola. Mada se RIP 膷esto koristi na malim mre啪ama, "
+"kompleksniji\n"
+"protokoli rutiranja su potrebni za slo啪ene mre啪e."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brazil"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivija"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruneji"
+msgid "Browse"
+msgstr "Pregledaj"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Da li se 啪elite poku拧ati spojiti na Internet sada?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgijska"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrein"
+msgid "Do you have an ISA sound card?"
+msgstr "Imate li ISA zvu膷nu karticu?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bugarska"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Nije prona膽en ethernet mre啪ni adapter na va拧em sistemu.\n"
+"Ne mogu podesiti ovu vrstu konekcije."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Banglade拧"
+msgid "Can't make screenshots before partitioning"
+msgstr "Ne mogu napraviti snimak ekrana prije particioniranja"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Ime ra膷unara"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna i Hercegovina"
+msgid "/File/Save _As"
+msgstr "/_Datoteka/Sa膷uvaj K_ao"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbejd啪an"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Da biste pristupili 拧tampa膷ima na udaljenim CUPS serverima u va拧oj lokalnoj "
+"mre啪i, sve 拧to treba je da uklju膷ite opciju \"Automatski prona膽i dostupne "
+"拧tampa膷e na udaljenim ra膷unarima\"; CUPS serveri 膰e automatski informisati "
+"va拧 ra膷unar o svojim 拧tampa膷ima. Svi 拧tampa膷i koji su poznati va拧em ra膷unaru "
+"su navedeni u sekciji \"Udaljeni 拧tampa膷i\" glavnog Printerdrake prozora. "
+"Ako va拧 CUPS server nije u lokalnoj mre啪i, morate ovdje unijeti njegovu IP "
+"adresu i eventualno broj porta kako biste dobili informacije od servera."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s nije u bazi skenera, 啪elite li ga ru膷no podesiti?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australija"
+msgid "Delay before booting default image"
+msgstr "膶ekanje prije bootanja default image-a"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Ameri膷ka Samoa"
+msgid "Restrict command line options"
+msgstr "Ograni膷i opcije komandne linije"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "Isto膷na Evropa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktik"
+msgid "Use free space"
+msgstr "Koristi slobodan prostor"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "koristi dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nizozemski Antili"
+msgid "Mail alert"
+msgstr "Mail obavijest"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenija"
+msgid "Internet configuration"
+msgstr "Internet konfiguracija"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albanija"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Detektovan %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Automatski prepoznaj 拧tam_pa膷e"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Ujedinjeni Arapski Emirati"
+msgid "Finish"
+msgstr "Kraj"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andora"
+msgid "Show automatically selected packages"
+msgstr "Automatski prika啪i izabrane pakete"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flagovi koje je prijavio kernel"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru啪no montiranje %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logi膷ke volumene\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podr拧ka za 2.2 kernele vi拧e ne postoji. Molim koristite 2.4 kernel."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VA艩 TO膶KI膯!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Da biste aktivirali mi拧a,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Molimo testirajte mi拧"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Bez mi拧a"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Ne拧to je pogre拧no! - Da li je instaliran mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "nijedan"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 dugmeta"
+msgid "Please try again"
+msgstr "Molimo poku拧ajte ponovo"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 dugmeta"
+msgid "The model is correct"
+msgstr "Model je ispravan"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 dugme"
+msgid "FAT resizing failed: %s"
+msgstr "Smanjivanje FAT particije nije uspjelo: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "Izbor pojedina膷nih paketa"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Ovoj particiji ne mo啪ete mijenjati veli膷inu"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
+msgid "Location"
+msgstr "Lokacija"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Gvatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Na ovom ra膷unaru"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS slovo ure膽aja: %s (pretpostavka)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrein"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "izostavi scsi module"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Op拧ti mi拧 sa 3 dugmeta"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Familija CPUa (npr: 6 za i686 generaciju)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Op拧ti mi拧 sa 2 dugmeta"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Po拧to radite mre啪nu instalaciju, va拧a mre啪a je ve膰 pode拧ena.\n"
+"Kliknite na Ok da zadr啪ite tu konfiguraciju ili Odustani za pode拧avanje va拧e "
+"Internet & Mre啪ne konekcije.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "serijski"
+msgid "Keyboard layout: %s\n"
+msgstr "Raspored tastature: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ovdje mo啪ete izabrati da li 拧tampa膷i spojeni na ovaj ra膷unar trebaju biti "
+"dostupni drugim ra膷unarima i kojim drugim ra膷unarima."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "To膷ki膰"
+msgid "Maltese (US)"
+msgstr "Malte拧ka (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Op拧ti"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
+"Manager/Windows) i NCP (NetWare) ta膷ke montiranja."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV kartica"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Prebaci u normalni mod"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Op拧ti PS2 Mi拧 sa to膷ki膰em"
+msgid "Size"
+msgstr "Veli膷ina"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "Greenland"
+msgstr "Grenland"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Prekida膷 izme膽u ravnog i grupnog sortiranja"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Pro拧iri stablo"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre拧ka u pisanju datoteke: %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Lo拧a backup datoteka"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Neispravna oznaka trake. Oznaka je %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Imate rupu u va拧oj tabeli particija, ali je ja ne mogu upotrijebiti.\n"
-"Jedino rje拧enje je da pomjerite va拧e primarne particije, kako bi se rupa "
-"na拧la pored extended particija"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podr啪ane na ovoj platformi"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "mo啪da"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "fino"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "vrlo fino"
+"Dijeljenje Internet konekcije je ve膰 pode拧eno. Trenutno je\n"
+"aktivno.\n"
+"\n"
+"艩ta 啪elite uraditi?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "va啪no"
+msgid "Delete All NBIs"
+msgstr "Obri拧i sve NBIje"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "must have"
-msgstr "obavezno"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Ovaj dijalog vam omogu膰uje da fino podesite va拧 bootloader:\n"
+"\n"
+" * \"Koristi bootloader\": ovdje su tri izbora za va拧 bootloader:\n"
+"\n"
+" * \"GRUB\": ako preferirate grub (tekstualni meni),\n"
+"\n"
+" * \"LILO sa tekstualnim menijem\": ako preferirate LILO sa\n"
+"njegovim tekstualnim interfejsom.\n"
+"\n"
+" * \"LILO sa grafi膷kim menijem\": ako preferirate LILO sa njegovim\n"
+"grafi膷kim interfejsom.\n"
+"\n"
+" * \"Boot ure膽aj\": u ve膰ini slu膷ajeva nije potrebno da mijenjate\n"
+"ponu膽enu vrijednost (\"/dev/hda\"), ali ako to 啪elite, bootloader\n"
+"mo啪e biti instaliran na drugi hard disk (\"/dev/hdb\") ili 膷ak na\n"
+"disketu (\"/dev/fd0\");\n"
+"\n"
+" * \"Pauza prije bootanja default image-a\": nakon boota ili reboota\n"
+"ra膷unara, ovo je vrijeme koje je dato korisniku za ra膷unarom da izabere\n"
+"neku opciju iz boot menija koja se razlikuje od izabrane.\n"
+"\n"
+"!! Pazite da ako odaberete da ne 啪elite instalirati bootloader (klikanjem\n"
+"na \"Presko膷i\"), morate se pobrinuti da imate neki na膷in za pokretanje\n"
+"va拧eg Mandrake Linux sistema! Budite sigurni da znate 拧ta ho膰ete prije\n"
+"nego 拧to promijenite neku od ovih opcija. !!\n"
+"\n"
+"Klik na dugme \"Napredno\" u ovom dijalogu vam pru啪a napredne opcije\n"
+"rezervisane za ekspertnog korisnika."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"ako je uklju膷eno, 拧alje mail izvje拧taj na ovu email adresu, ina膷e ga 拧alje "
+"root-u."
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Koju konfiguraciju XFree 啪elite imati?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (mo啪da nedostaju raidtools?)"
+msgid "More"
+msgstr "Jo拧"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Sa ovim sigurnosnim nivoom, postaje mogu膰e koristiti ovaj sistem kao "
+"server.\n"
+"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
+"prima\n"
+"konekcije sa mnogo klijenata. Napomena: ako je va拧 ra膷unar samo klijent na "
+"Internetu, mo啪da je bolje da izaberete ni啪i nivo."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Stop"
+msgid "Account Password"
+msgstr "艩ifra naloga"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Odlu膷ili ste da na particiju instalirate bootloader.\n"
+"Ovo podrazumijeva da ve膰 imate bootloader na hard disku sa kojeg bootate "
+"(npr: System Commander).\n"
+"\n"
+"Sa kojeg diska vr拧ite boot?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Prilikom boota"
+msgid "Tajik keyboard"
+msgstr "Tad啪i膷ka tastatura"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, 啪alim."
+"Mo啪ete kopirati konfiguraciju 拧tampa膷a koju ste napravili za spooler %s u % "
+"s, va拧 trenutni spooler. Svi podaci o konfiguraciji (naziv 拧tampa膷a, opis, "
+"lokacija, tip konekcije kao i podrazumjevane opcije) 膰e biti preuzeti, ali "
+"zadaci 拧tampe ne膰e biti preba膷eni.\n"
+"Svi redovi ne mogu biti preba膷eni zbog sljede膰ih razloga:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
+msgid "Font List"
+msgstr "Lista fontova"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "zaustavljen"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Mo啪da 膰ete trebati promijeniti va拧 Open Firmware boot ure膽aj\n"
+" da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n"
+" prilikom bootanja, dr啪ite Command-Option-O-F prilikom boota\n"
+" i unesite:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Zatim kucajte: shut-down\n"
+"Prilikom idu膰eg boota biste trebali vidjeti upit bootloadera."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "aktivan"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Izgleda da imate OldWorld ili Unknown ra膷unar,\n"
+" yaboot bootloader ne膰e raditi kod vas.\n"
+"Instalacija 膰e se nastaviti, ali 膰ete\n"
+" morati koristiti BootX za bootanje va拧eg ra膷unara"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
+msgid "Select file"
+msgstr "Izaberite datoteku"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Server baze podataka"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Izaberite mre啪u ili ra膷unar 膷ijim 拧tampa膷ima treba omogu膰iti pristup."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Ove komande mo啪ete tako膽er koristiti u polju \"Komanda za 拧tampu\" u "
+"dijalozima za 拧tampu mnogih aplikacija, ali ovdje ne morate navesti ime "
+"datoteke jer tu datoteku obezbje膽uje sama aplikacija.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
+msgid "Japan"
+msgstr "Japan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "Lista opcija za 拧tampu"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "艩tampa"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokre膰e X Font Server (ovo je nu啪no da bi XFree radio)."
+msgid "Search servers"
+msgstr "Tra啪i servere"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Pokre膰e drajvere za va拧e USB ure膽aje."
+msgid "NCP queue name missing!"
+msgstr "NCP naziv reda nedostaje!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog je sistem pomo膰u kojeg mnogi servisi zapisuju poruke\n"
-"u razne sistemske dnevnike (logove). Pametno je uvijek imati pokrenuti "
-"syslog."
+"Upozorenje, otkrivena je druga Internet konekcija, mo啪da preko va拧e mre啪e"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Pokre膰e zvu膷ni sistem na va拧em ra膷unaru"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM pod oznakom \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Rwho protokol omogu膰ava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na ra膷unar na kojem radi rwho demon (sli膷no fingeru)."
+"Snima i u膷itava sistemski spremnik entropije za ve膰u kvalitetu\n"
+"generisanja slu膷ajnih brojeva."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Rusers protokol omogu膰ava korisnicima na mre啪i da identificiraju\n"
-"ko je prijavljen na ostalim ra膷unarima."
+"Nisam uspio provjeriti datote膷ni sistem %s. 沤elite li popraviti gre拧ke? "
+"(pa啪nja, mo啪ete izgubiti podatke)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omogu膰ava korisnicima na mre啪i da dobave\n"
-"mjeru performansi za svaki ra膷unar na toj mre啪i"
+msgid "Turn your computer into a reliable server"
+msgstr "Pretvorite va拧 ra膷unar u pouzdan server"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogu膰uje da se automatska IP tabela rutiranja pode拧ava\n"
-"preko RIP protokola. Mada se RIP 膷esto koristi na malim mre啪ama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za slo啪ene mre啪e."
+msgid " (driver %s)"
+msgstr " (drajver %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Dodjeljuje raw ure膽aje blokovskim ure膽ajima (kao 拧to su\n"
-"particije hard diska), za potrebu aplikacija kao 拧to je Oracle ili DVD "
-"playeri"
+"Loopback datoteka(e):\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Snima i u膷itava sistemski spremnik entropije za ve膰u kvalitetu\n"
-"generisanja slu膷ajnih brojeva."
+msgid "I don't know"
+msgstr "Ne znam"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji 拧alje po拧tu sa jednog "
-"ra膷unara na drugi."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao 拧to\n"
-"su NFS i NIS. Portmap server mora raditi na ra膷unarima koje slu啪e kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
+"Sada 膰ete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
+"mora biti kori拧tena uz pa啪nju.\n"
+"\n"
+"Sa ovom opcijom bi膰ete u mogu膰nosti da ponovite instalaciju koju ste obavili "
+"na ovom ra膷unaru, pri 膰emu 膰ete biti interaktivno upitani za neke korake, "
+"kako biste promijenili njihove vrijednosti.\n"
+"\n"
+"Za maksimalnu sigurnost, particioniranje i formatiranje nikad ne膰e biti "
+"obavljeno automatski, bez obzira 拧ta izaberete tokom instalacije na ovaj "
+"ra膷unar.\n"
+"\n"
+"Da li 啪elite nastaviti?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"PCMCIA podr拧ka slu啪i za ispravan rad ure膽aja kao 拧to su mre啪ne\n"
-"kartice i modemi, priklju膷enih na PCMCIA port (obi膷no na laptopima).\n"
-"Ne膰e se pokrenuti sve dok nije ispravno konfigurisan, tako da je\n"
-"sigurno imati ga instaliranog i na ra膷unarima kojima nije potreban."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr拧ka za OKI 4w i kompatibilne 'winprinter' 拧tampa膷e."
+"\n"
+"\n"
+"Va拧a kartica trenutno koristi %s \"%s\" drajver (uobi膷ajeni drajver za va拧u "
+"karticu je \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uklju膷uje numlock pod konzolom i grafi膷kim okru啪enjem\n"
-"prilikom boota."
+msgid "Post Uninstall"
+msgstr "Post Uninstall"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mre啪a.\n"
-"Ovaj servis omogu膰uje NFS funkcionalnost zaklju膷avanja datoteka."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mre啪a.\n"
-"Ovaj servis omogu膰uje funkcionalnost NFS servera, kojeg pode拧avate\n"
-"putem /etc/exports datoteke."
+msgid "Cpuid level"
+msgstr "Nivo cpuid-a"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mre啪ne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolska (膰irilica)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) ta膷ke montiranja."
+msgid "Add a module"
+msgstr "Dodaj modul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za odre膽ivanje IP "
-"adrese iz imena ra膷unara."
+msgid "Profile to delete:"
+msgstr "Profil za brisanje:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti (clusteri servera)."
+msgid "Local measure"
+msgstr "Lokalne mjere"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za 拧tampu koji je potreban da bi lpr sistem 拧tampe radio "
-"ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke 拧tampe 拧tampa膷u/ima."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf 膰e ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se odr啪ala sistemska konfiguracija."
+msgid "Account Login (user name)"
+msgstr "Login naloga (korisni膷ko ime)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i pode拧avanje hardware-a tokom boota."
+msgid "Fdiv bug"
+msgstr "Fdiv bug"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall pode拧iva膷\n"
+"\n"
+"Prije nego 拧to nastavite, provjerite da li ste ispravno podesili pristup\n"
+"mre啪i/Internetu pomo膰u alata drakconnect."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket u膷itava izabranu mapu tastature kao 拧to je pode拧eno u\n"
-"/etc/sysconfig/keyboard, 拧to se mo啪e podesiti kori拧tenjem kbdconfig\n"
-"programa. Ovaj servis biste trebali ostaviti uklju膷enim na ve膰ini ra膷unara."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokre膰e filtriranje paketa za Linux kernele serije 2.2 kako\n"
-"bi se aktivirao firewall i za拧titio va拧 ra膷unar od mre啪nih napada."
+msgid "Uruguay"
+msgstr "Urugvaj"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver (obi膷no nazvan inetd) pokre膰e razne druge Internet\n"
-"servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao 拧to su\n"
-"telnet, ftp, rsh i rlogin. Isklju膷ivanje inetd-a isklju膷uje sve servise za "
-"koje je\n"
-"on nadle啪an."
+msgid "Path selection"
+msgstr "Izbor staze"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web server. Koristi se za poslu啪ivanje HTML\n"
-"datoteka i CGI skripti."
+msgid "Name/IP address of host:"
+msgstr "Ime/IP adresa ra膷unara:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ispituje hardware i eventualno pode拧ava novi ili\n"
-"izmjenjeni hardware."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"GPM dodaje podr拧ku za mi拧a tekstualnim aplikacijama kao 拧to je\n"
-"Midnight Commander. On tako膽er omogu膰uje konzolne isjeci/umetni operacije\n"
-"pomo膰u mi拧a i uklju膷uje podr拧ku za pop-up menije na konzoli."
+"Ne拧to lo拧e se de拧ava na va拧em disku. \n"
+"Test integriteta podataka nije uspio. \n"
+"To zna膷i 膰e da pisanje bilo 膷ega na disk rezultirati sme膰em."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron je standardan UNIX program koji periodi膷no pokre膰e programe koje\n"
-"zada korisnik. Vixie cron dodaje ve膰i broj mogu膰nosti osnovnom\n"
-"UNIX cronu, uklju膷uju膰i bolju sigurnost i mo膰nije opcije za pode拧avanje."
+msgid "Printer host name or IP missing!"
+msgstr "Nedostaje hostname 拧tampa膷a ili IP adresa!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Izvr拧ava naredbe zakazane putem at komande u zadato vrijeme,\n"
-"te pokre膰e programe u pozadini kada je ra膷unar neoptere膰en."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Molimo izaberite sve korisnike koje 啪elite uklju膷iti u va拧 backup."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Apmd se koristi za nadgledanje statusa baterija i njegovo bilje啪enje preko\n"
-"sysloga. Tako膽e se mo啪e koristiti za ga拧enje ra膷unara kada su baterije pri "
-"kraju."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron je periodi膷ni izvr拧itelj programa."
+"%s se mora podesiti iz printerdrake-a.\n"
+"Mo啪ete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
+"Hardware."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokre膰e ALSA zvu膷ni sistem (Advanced Linux Sound Architecture)"
+msgid "Bangladesh"
+msgstr "Banglade拧"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
+msgid "Japan (cable)"
+msgstr "Japan (kablovska)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Upotreba: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
+"\n"
+"Ovaj 膷arobnjak 膰e vam pomo膰i da instalirate 拧tampa膷e spojene na ovaj "
+"ra膷unar, na mre啪u ili na udaljeni Windows ra膷unar\n"
+"\n"
+"Ako imate 拧tampa膷 spojen na ovaj ra膷unar, molim priklju膷ite ga na ra膷unar i "
+"upalite ga kako bi bio auto-prepoznat. Tako膽e mre啪ni 拧tampa膷i i Windows "
+"ra膷unari moraju biti povezani i upaljeni.\n"
+"\n"
+"Obratite pa啪nju da detekcija mre啪nih 拧tampa膷a traje du啪e nego detekcija "
+"拧tampa膷a spojenih na ovaj ra膷unar. Stoga ugasite detekciju mre啪nih 拧tampa膷a "
+"i/ili Windows 拧tampa膷a ako vam ona nije potrebna.\n"
+"\n"
+"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne 啪elite "
+"podesiti 拧tampa膷 sada."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake rezolucija"
+msgid "Initial tests"
+msgstr "Probni inicijali"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Continue"
+msgstr "Nastavak"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Custom Restore"
+msgstr "Ru膷no vra膰anje"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[OPTION]...\n"
-" --no-confirmation ne postavljaj prvo pitanje u MandrakeUpdate modu\n"
-" --no-verify-rpm ne provjeravaj potpise paketa\n"
-" --changelog-first prika啪i changelog prije filelist u opisnom prozoru\n"
-" --merge-all-rpmnew predlo啪i merge svih prona膽enih .rpmnew/.rpmsave "
-"datoteka"
+"\"Zvu膷na kartica\": ako je na va拧em sistemu otkrivena zvu膷na kartica, ona "
+"膰e\n"
+"biti prikazana ovdje. Ako primjetite da prikazana zvu膷na kartica nije ona\n"
+"koja je ustvari dio va拧eg sistema, mo啪ete kliknuti na dugme i odabrati neki\n"
+"drugi drajver."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Skripta"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Aplikacija za povezivanje na mre啪u/Internet i nadzor veze\n"
-"\n"
-"--defaultintf interface : podesi podrazumijevani interfejs\n"
-"--connect : spoji se na Inernet, ako nisi ve膰 spojen\n"
-"--disconnect : prekini vezu s Internetom, ako si spojen\n"
-"--force : koristi se sa (dis)connect : prinudi operaciju.\n"
-"--status : vra膰a 1 ako je spojen, u suprotnom 0.\n"
-"--quiet : bez interaktivnosti. Koristi se sa (dis)connect."
+msgid "Error reading file %s"
+msgstr "Gre拧ka u 膷itanju datoteke %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "PLL postavka:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[tastatura]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"Pode拧avanje Mandrake Terminal Servera\n"
-"--enable : omogu膰i MTS\n"
-"--disable : onemogu膰i MTS\n"
-"--start : pokreni MTS\n"
-"--stop : zaustavi MTS\n"
-"--adduser : dodaj postoje膰eg sistemskog korisnika MTSu (potrebno je "
-"korisni膷ko ime)\n"
-"--deluser : obri拧i postoje膰eg sistemskog korisnika sa MTSa (potrebno "
-"je korisni膷ko ime)\n"
-"--addclient : dodaj klijentski ra膷unar MTSu (potrebna je MAC adresa, "
-"IP, nbi image ime)\n"
-"--delclient : obri拧i klijentski ra膷unar sa MTSa (potrebna je MAC "
-"adresa, IP, nbi image ime)"
+msgid " on "
+msgstr " na "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Aplikacija za uvoz i nadzor fontova \n"
-"--windows_import : uvezi sa dostupnih windows particija.\n"
-"--xls_fonts : prika啪i sve postoje膰e fontove koje prijavljuje xls\n"
-"--strong : jaka provjera fonta.\n"
-"--install : instaliraj bilo koji font ili direktorij.\n"
-"--uninstall : deinstaliraj bilo koji font ili direktorij.\n"
-"--replace : zamijeni font ako vec postoji\n"
-"--application : 0 bez aplikacija.\n"
-" : 1 podr拧ka za sve poznate aplikacije.\n"
-" : ime_aplikacije kao so za staroffice \n"
-" : i gs za ghostscript za samo tu aplikaciju."
+msgid "The URL must begin with http:// or https://"
+msgstr "URL mora po膷injati sa http:// ili https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPCIJE:\n"
-" --help - ispisuje ovu pomo膰.\n"
-" --report - program treba biti neki od mandrake alata\n"
-" --incident - program treba biti neki od mandrake alata"
+"Mo啪ete dati direktno URI za pristup 拧tampa膷u. URI mora zadovoljavati ili "
+"CUPS ili Foomatic specifikacije. Obratite pa啪nju da nisu svi tipovi URIja "
+"podr啪ani od svih spoolera."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Ostali OSi (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Instaliraj/Unaprijedi"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paketa"
#: ../../standalone.pm:1
#, c-format
@@ -7429,4863 +6776,5347 @@ msgstr ""
"--help : show this message.\n"
"--version : show version number.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Potrebna je autentikacija na domeni"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Instaliraj update"
+" Hvala:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Pode拧avanje servisa"
+msgid "Costa Rica"
+msgstr "Kostarika"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Pode拧avanje X"
+msgid "Use libsafe for servers"
+msgstr "Koristi libsafe za servere"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
+msgid "Icelandic"
+msgstr "Islandska"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Pode拧avanje mre啪e"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Upotreba: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Dodajte korisnika"
+msgid "Please relog into %s to activate the changes"
+msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Root 拧ifra"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Sistem instalacije"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub mod"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
+msgid "Output"
+msgstr "Ispis"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formatiranje particija"
+msgid "Circular mounts %s\n"
+msgstr "Kru啪no montiranje %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Particioniranje"
+msgid "Martinique"
+msgstr "Martinik"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Izaberite va拧u tastaturu"
+msgid "HardDrive / NFS"
+msgstr "HardDrive / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
+msgid "a number"
+msgstr "broj"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
+msgid "Swedish"
+msgstr "艩vedska"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Pode拧avanje mi拧a"
+msgid "Which %s driver should I try?"
+msgstr "Koji %s drajver 膰u poku拧ati?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licenca"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Primi膰ete obavje拧tenje ako neki od izabranih servisa prestane raditi"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Jezik"
+msgid "Filesystem types:"
+msgstr "Tipovi file sistema:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", vi拧enamjenski ure膽aj na HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "U redu"
+msgid "Northern Mariana Islands"
+msgstr "Sjeverna Marijanska ostrva"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "nijedan"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
+msgid "user :"
+msgstr "korisnik :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
+msgid "Please enter your password"
+msgstr "Molimo unesite va拧u 拧ifru"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PA沤NJA OVO JE EKSPERIMENTALNA PODR艩KA I MO沤E ZALEDITI VA艩 RA膶UNAR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje sa XFree %s."
+"Naziv profila koji 膰e biti kreiran (novi profil je kreiran kao kopija "
+"postoje膰eg) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskim ubrzanjem"
+msgid "Floppy"
+msgstr "Disketa"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PA沤NJA OVO JE EKSPERIMENTALNA PODR艩KA I MO沤E ZALEDITI VA艩 RA膶UNAR.\n"
-"Va拧u karticu tako膽e podr啪ava XFree %s koji mo啪e imati bolju podr拧ku za 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Molim uklju膷ite ako 啪elite obrisati va拧 RW medij (prva sesija)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje ali samo sa\n"
-"XFree %s. Va拧u karticu tako膽e podr啪ava XFree %s koji mo啪e imati bolju "
-"podr拧ku za 2D."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referenciranje"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Bootloader"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Podesi samo karticu \"%s\"%s"
+msgid "Move"
+msgstr "Premje拧tanje"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
+msgid "Bootloader to use"
+msgstr "Bootloader koji 膰ete koristiti"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfiguri拧i sve glave odvojeno"
+msgid "SMB server host"
+msgstr "SMB server ime"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree 啪elite imati?"
+msgid "Name Servers:"
+msgstr "DNS serveri:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Pa啪nja\n"
+"\n"
+"Molim pro膷itajte pa啪ljivo uslove licence ispod. Ako se ne sla啪ete sa bilo\n"
+"kojim dijelom, nije vam dozvoljeno da instalirate naredni CD medij. "
+"Pritisnite\n"
+"dugme 'odbij' da biste nastavili sa instalacijom bez kori拧tenja ovog "
+"medija.\n"
+"Budu膰i da prevodilac ovog teksta nije u mogu膰nosti da osigura pravnu\n"
+"provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n"
+"obliku.\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Izaberite veli膷inu memorije va拧e grafi膷ke karte"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ukloni ovaj 拧tampa膷 iz Star/Open Offica"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Va拧 sistem podr啪ava konfiguraciju vi拧e glava.\n"
-"艩ta 啪elite u膷initi?"
+"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
+"i dostupnosti (clusteri servera)."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milijarde boja (32 bita)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Izaberite X server"
+msgid "Micronesia"
+msgstr "Micronesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X server"
+msgid "License"
+msgstr "Licenca"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB ili vi拧e"
+msgid "This may take a moment to generate the keys."
+msgstr "Mo啪da 膰e trebati par trenutaka da se generi拧u klju膷evi."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Automatsko prepoznavanje 拧tampa膷a (lokalni, TCP/Socket i SMB 拧tampa膷i)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (koriste膰i pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Do拧lo je do gre拧ke - nije prona膽en nijedan ispravan ure膽aj na kojem se mogu "
+"kreirati novi file sistemi. Molimo provjerite va拧 hardware i prona膽ite uzrok "
+"gre拧ke"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Pokre膰em sistem za 拧tampu tokom boota"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Da li 啪elite pokrenuti konekciju prilikom boota?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "ID procesora"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "Rje拧avanje problema sa zvukom"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Poljska (qwerty)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "pokreni sada"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Zadr啪ati izmjene?\n"
-"Trenutna konfiguracija je:\n"
"\n"
-"%s"
+"Drakbackup aktivnosti putem CDa:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Opcije"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Sada 膰ete instalirati sistem za 拧tampu %s na sistemu koji je na sigurnosnom "
+"nivou % s.\n"
+"\n"
+"Ovaj sistem za 拧tampu pokre膰e demon (pozadinski proces) koji 膷eka zadatke "
+"拧tampe i rje拧ava ih. Ovom demonu tako膽e mogu pristupiti drugi ra膷unari putem "
+"mre啪e, tako da je to mogu膰a ta膷ka napada. Stoga se tek rijetki od odabranih "
+"demona pokre膰u na ovom sigurnosnom nivou.\n"
+"\n"
+"Da li zaista 啪elite podesiti 拧tampanje na ovom ra膷unaru?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Host \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Rezolucija"
+msgid "This partition can't be used for loopback"
+msgstr "Ova particija se ne mo啪e koristiti za loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Datoteka ve膰 postoji. 沤elite li je koristiti?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafi膷ka karta"
+msgid "received: "
+msgstr "primljeno:"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Brzina vertikalnog osvje啪avanja"
+msgid "Right Alt key"
+msgstr "Desna Alt tipka"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvje啪avanja"
+msgid "the list of alternative drivers for this sound card"
+msgstr "spisak alternativnih drajvera za ovu zvu膷nu karticu"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kriti膷na parametra su brzina vertikalnog osvje啪enja, 拧to je brzina\n"
-"kojom se cijeli ekran osvje啪ava, i brzina horizontalne\n"
-"sinhronizacije, 拧to je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VA沤NO da ne izaberete tip monitora 膷iji je sinhronizacioni\n"
-"raspon izvan mogu膰nosti va拧eg monitora: time mo啪ete o拧tetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Plug'n'Play probanje nije uspjelo. Molim izaberite odgovaraju膰i monitor"
+msgid "Scanner sharing"
+msgstr "Dijeljenje skenera"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Proizvo膽a膷"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunis"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
+msgid "Profile: "
+msgstr "Profil:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafi膷ka karta: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Kliknite na ure膽aj u lijevom drvetu kako biste prikazali njegove informacije."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i broj boja"
+msgid "XawTV isn't installed!"
+msgstr "XawTV nije instaliran!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Rezolucije"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Napravi/premjesti\n"
+"backup klju膷eve za SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Zaobi膽i kriti膷ne datoteke (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
+msgid "old static device name used in dev package"
+msgstr "staro stati膷ko ime ure膽aja koje koristi dev paket"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
+msgid "This label is already used"
+msgstr "Ova oznaka je ve膰 u upotrebi"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
+"\n"
+"Ovaj 膷arobnjak 膰e vam pomo膰i da instalirate 拧tampa膷e spojene na ovaj ra膷unar "
+"ili spojene na mre啪u.\n"
+"\n"
+"Ako imate 拧tampa膷 spojen na ovaj ra膷unar, molim priklju膷ite ga na ra膷unar i "
+"upalite ga kako bi bio auto-prepoznat. Tako膽e mre啪ni 拧tampa膷i moraju biti "
+"spojeni i upaljeni.\n"
+"\n"
+"Obratite pa啪nju da detekcija mre啪nih 拧tampa膷a traje du啪e nego detekcija "
+"拧tampa膷a spojenih na ovaj ra膷unar. Stoga ugasite detekciju mre啪nih 拧tampa膷a "
+"ako vam ona nije potrebna.\n"
+"\n"
+"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne 啪elite "
+"podesiti 拧tampa膷 sada."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Nakon formatiranja particije %s, svi podaci na toj particiji 膰e biti "
+"izgubljeni"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
+msgid "Connection Time: "
+msgstr "Vrijeme konekcije: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Napu拧tam za %d sekundi"
+msgid "select perm file to see/edit"
+msgstr "izaberi perm datoteku za pregled/izmjenu"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Do拧lo je do gre拧ke:\n"
-"%s\n"
-"Probajte promijeniti neke parametre"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafi膷ke karte mo啪e zalediti ra膷unar"
+"Molimo ubacite Instalacioni CD u va拧 CD-ROM ure膽aj i pritisnite Ok kad ste "
+"spremni.\n"
+"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "沤elite li testirati konfiguraciju?"
+msgid "Use group id for execution"
+msgstr "Koristi id grupe za izvr拧avanje"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
+msgid "Choose the default user:"
+msgstr "Izaberite default korisnika:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Koji standard koristi va拧 TV?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Izgleda da va拧a grafi膷ka kartica ima TV-OUT konektor.\n"
-"On se mo啪e podesiti da radi koriste膰i frame-buffer.\n"
"\n"
-"Za ovo je potrebno da uklju膷ite grafi膷ku karticu u TV prije nego 拧to upalite "
-"ra膷unar.\n"
-"Zatim u meniju bootloadera izaberite opciju \"TVout\"\n"
-"\n"
-"Imate li ovu mogu膰nost?"
+"Ovdje ne morate pode拧avati 拧tampa膷e na udaljenim CUPS serverima; ovi "
+"拧tampa膷i 膰e biti automatski prepoznati."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Mogu podesiti va拧 ra膷unar da automatski pokrene grafi膷ki interfejs (XFree) "
-"pri pokretanju ra膷unara.\n"
-"沤elite li da se XFree automatski pokre膰e?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Grafi膷ki interfejs pri pokretanju"
+"Mandrake Linux podr啪ava vi拧e jezika. Izaberite jezike koje\n"
+"啪elite instalirati. Oni 膰e biti dostupni kada se zavr拧i va拧a\n"
+"instalacija i restartujete va拧 sistem."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
+msgid "Domain"
+msgstr "Domena"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Precizna veli膷ina RAMa ako je potrebno (prona膽eno %d MB)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO i grub su Linux bootloader-i. Ova faza je obi膷no automatizovana.\n"
+"DrakX 膰e analizirati boot sektor diska i postupati u skladu s onim 拧to\n"
+"zatekne tamo:\n"
+"\n"
+" * ako prona膽e Windows boot sektor, bi膰e zamijenjen sa grub/LILO boot\n"
+"sektorom. Na ovaj na膷in bi膰ete u mogu膰nosti da u膷itate ili GNU/Linux ili\n"
+"neki drugi OS.\n"
+"\n"
+" * ako prona膽e grub ili LILO boot sektor, zamijeni膰e ga novim.\n"
+"\n"
+"Ako ne mo啪e donijeti odluku, DrakX 膰e vas pitati gdje da postavi\n"
+"bootloader.\n"
+"\n"
+"\"Boot ure膽aj\": u ve膰ini slu膷ajeva, ne trebate mijenjati ponu膽eno\n"
+"(\"Prvi sektor diska (MBR)\"), ali ako odlu膷ite, mo啪ete instalirati "
+"bootloader\n"
+"na drugi hard disk (\"/dev/hdb\") ili 膷ak na disketu (\"Na disketi\")."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Broj boja: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Provider dns 2 (opcionalno)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafi膷ka memorija: %s kB\n"
+msgid "Boot device"
+msgstr "Boot ure膽aj"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafi膷ka karta: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Kojoj particiji 啪elite promijeniti veli膷inu?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Alat za pregled va拧ih logova"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "D啪ibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ure膽aj mi拧a: %s\n"
+msgid "detected on port %s"
+msgstr "detektovan na portu %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta mi拧a: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Grafi膷ka karta: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Ta膷ka montiranja: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Molim uklju膷ite ako koristite DVDRAM ure膽aj"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Server:"
+msgid "Splash selection"
+msgstr "Izbor splash-a"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL mora po膷injati sa http:// ili https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Extended particije nisu podr啪ane na ovoj platformi"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Molim unesite URL WebDAV servera"
+msgid "ISDN Configuration"
+msgstr "Pode拧avanje ISDNa"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Ta膷ka montiranja"
+msgid "high"
+msgstr "visok"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "Internet Connection Sharing"
+msgstr "Dijeljenje Internet konekcije"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Montiraj"
+msgid "Choose file"
+msgstr "Izaberi datoteku"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Demontiraj"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Upozorenje! Prona膽ena je postoje膰a konfiguracija firewalla. Mo啪da 膰e biti "
+"potrebno neko ru膷no pode拧avanje nakon instalacije."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Novi"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "艩tampam/pristupam foto kartici na \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV je protokol koji vam omogu膰uje da direktorij web servera\n"
-"montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n"
-"je web server pode拧en kao WebDAV server). Ako 啪elite dodati WebDAV\n"
-"ta膷ke montiranja, izaberite \"Novi\"."
+"沤elite li omogu膰iti 拧tampanje na 拧tampa膷ima navedenim gore ili na 拧tampa膷ima "
+"u lokalnoj mre啪i?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristi ``%s'' umjesto toga"
+msgid "Printer default settings"
+msgstr "Podrazumjevane postavke 拧tampa膷a"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Tip"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Op拧ti PS2 Mi拧 sa to膷ki膰em"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
+msgid "Removing old printer \"%s\"..."
+msgstr "Uklanjam stari 拧tampa膷 \"%s\" ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Obri拧i"
+msgid "Select a device !"
+msgstr "Izaberite ure膽aj !"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Kreiraj"
+msgid "Remove selected server"
+msgstr "Ukloni izabrani server"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
+msgid "French Southern Territories"
+msgstr "Francuske Ju啪ne Teritorije"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Prazno"
+msgid "the vendor name of the processor"
+msgstr "naziv proizvo膽a膷a procesora"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Instaliram paket %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Provjeravam ure膽aj i pode拧avam HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Da biste imali jo拧 particija, molimo pobri拧ite jednu kako bi se mogla "
+"kreirati extended particija"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Va拧 拧tampa膷 je pode拧en automatski kako bi vam dao pristup memoriji foto "
+"kartice sa PCa. Sada mo啪ete pristupiti va拧im foto karticama koriste膰i "
+"grafi膷ki program \"MToolsFM\" (Meni: \"Aplikacije\" -> \"Datote膷ni alati\" -"
+"> \"MTools File Manager\") ili alat komandne linije \"mtools\" (kucajte "
+"\"man mtools\" na komandnoj liniji za vi拧e informacija). Datote膷ni sistem "
+"va拧e kartice 膰ete na膰i pod slovom \"p:\", ili pod narednim slovima ako imate "
+"vi拧e od jednog HP 拧tampa膷a sa jedinicom za foto kartice. U \"MToolsFM\" "
+"promijeniti slovo drajva koriste膰i polje u gornjem desnom uglu liste "
+"datoteka."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Izaberite pakete za instalaciju"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Nije prona膽en nijedan hard disk"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Neke gre拧ke prilikom slanja poruka mo啪e izazvati \n"
+" lo拧e pode拧en postfix. Ovo mo啪ete rije拧iti tako 拧to 膰ete\n"
+" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Molimo kliknite na particiju"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"SVE postoje膰e particije i podaci na njima 膰e biti izgubljeni na disku %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Imate jednu veliku Microsoft Windows particiju.\n"
-"Predla啪em da najprije promijenite veli膷inu te particije\n"
-"(kliknite na nju, zatim na \"Promijeni veli膷inu\")"
+"Va拧 sistem nema dovoljno preostalog prostora za instalaciju ili unaprje膽enje "
+"(%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Izaberi akciju"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Svakom 拧tampa膷u treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
+"nije potrebno popuniti. Oni su komentari za korisnike."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"艩tampa膷\": klikanjem na dugme \"Podesi\" otvori膰ete 膷arobnjak za\n"
+"pode拧avanje 拧tampa膷a. Konsultujte odgovaraju膰e poglavlje \"Vodi膷a za\n"
+"po膷etnike\" za vi拧e informacija o tome kako podesiti novi 拧tampa膷. "
+"Interfejs\n"
+"koji je tamo prikazan je vrlo sli膷an onom koji se koristi prilikom "
+"instalacije."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard"
-msgstr "膶arobnjak"
+msgid "Bhutan"
+msgstr "Butan"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite pa啪ljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na po膷etku diska"
+msgid "Network interface"
+msgstr "Mre啪ni interface"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Molim najprije napravite backup va拧ih podataka"
+msgid "Reading printer data..."
+msgstr "膶itam podatke o 拧tampa膷u..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Pro膷itajte pa啪ljivo!"
+msgid "Korean keyboard"
+msgstr "Korejanska tastatura"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Klju膷 enkripcije (jo拧 jednom)"
+msgid "Not connected"
+msgstr "Nije konektovan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Klju膷 enkripcije"
+msgid "Greek"
+msgstr "Gr膷ka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Klju膷evi enkripcije se ne poklapaju"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts and Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Ovaj klju膷 enkripcije je previ拧e jednostavan (mora imati najmanje %d "
-"karaktera)"
+"Transfer uspje拧an\n"
+"Mo啪da je potrebno da provjerite da li se mo啪ete prijaviti na server sa:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"bez pitanja o 拧ifri."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite va拧 klju膷 za kodiranje datote膷nog sistema"
+msgid "Enable OF Boot?"
+msgstr "Omogu膰i boot sa OFa?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Klju膷 za kodiranje datote膷nog sistema"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Ne mo啪ete koristiti JFS za particije manje od 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tip: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor VertRefresh: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "na kanalu %d id %d\n"
+msgid "path"
+msgstr "staza"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
+msgid "Mount point"
+msgstr "Ta膷ka montiranja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Do拧lo je do gre拧ke:\n"
+"%s\n"
+"Probajte promijeniti neke parametre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Restore system"
+msgstr "Vrati sistem"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "Ovo su ra膷unari kojima treba dozvoliti kori拧tenje lokalnog skenera:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Veli膷ina: %s\n"
+msgid "The DHCP end ip"
+msgstr "Krajnja DHCP adresa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Samo za 膷itanje"
+msgid "Another one"
+msgstr "Jo拧 jedan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Ure膽aj: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot va拧eg sistema.\n"
+msgid "Colombia"
+msgstr "Kolumbija"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Trenutna konfiguracija `%s':\n"
"\n"
-"Postoji mogu膰nost da je ova\n"
-"particija Driver particija. Vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
+"Mre啪a: %s\n"
+"IP adresa: %s\n"
+"IP atributi: %s\n"
+"Drajver: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veli膷ina chunka %s\n"
+msgid "Details"
+msgstr "Detalji"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Iz sigurnosnih razloga, sada 膰e biti odspojen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-" (za MS-DOS boot, ne za lilo)\n"
+msgid "Synchronization tool"
+msgstr "Alat za sinhroniziranje"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Proveravam va拧 sistem..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "艩tampaj"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Montirana\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Ubacite traku sa oznakom %s u kasetni\n"
+"ure膽aj %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
+msgid "Mongolia"
+msgstr "Mongolija"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatirana\n"
+msgid "Mounted\n"
+msgstr "Montirana\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafi膷ki interfejs"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
+msgid "Restore Users"
+msgstr "Vrati korisnike"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Veli膷ina: %s"
+msgid "Encryption key for %s"
+msgstr "Klju膷 enkripcije za %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Po膷etak: sector %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao 拧to\n"
+"su NFS i NIS. Portmap server mora raditi na ra膷unarima koje slu啪e kao\n"
+"serveri za protokole koji koriste RPC mehanizam."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Ime: "
+msgid "Detected hardware"
+msgstr "Detektovani hardver"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS slovo ure膽aja: %s (pretpostavka)\n"
+msgid "Mauritius"
+msgstr "Mauricijus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je od sada poznata kao %s"
+msgid "Myanmar (Burmese)"
+msgstr "Mjanmarska (Burmanska)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
+msgid "Enabling swap partition %s"
+msgstr "Uklju膷ujem swap particiju %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo "
+"dovoljno prostora)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Premje拧tam datoteke na novu particiju"
+msgid "Armenian (old)"
+msgstr "Armenska (stara)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Direktorij %s ve膰 sadr啪i neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
+"艩tampa膷 pod imenom \"%s\" ve膰 postoji pod %s: \n"
+"Kliknite na \"Prebaci\" da to prepi拧ete.\n"
+"Mo啪ete tako膽er unijeti novo ime ili presko膷iti ovaj 拧tampa膷."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji 膰e biti "
-"izgubljeni"
+"Prona膽ite rje拧enja za va拧e probleme putem MandrakeSoft-ove online podr拧ke."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Bi膰e potrebno da rebootate prije nego 拧to izmjene mogu stupiti na snagu"
+msgid ", host \"%s\", port %s"
+msgstr ", host \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za ure膽aj %s 膰e biti zapisana na disk!"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Potreban je paket %s. Da li ga 啪elite instalirati?"
+msgid "%s formatting of %s failed"
+msgstr "%s formatiranje %s nije uspjelo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
+msgid "Partitioning failed: %s"
+msgstr "Particioniranje nije uspjelo: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna."
+msgid "Canada (cable)"
+msgstr "Kanada (kablovska)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "veli膷ina chunka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Unaprijedi %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "nivo"
+msgid "Workstation"
+msgstr "Radna stanica"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "ure膽aj"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instaliram paket %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Razni"
+msgid "Kyrgyzstan"
+msgstr "Kirgistan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "Opcije montiranja"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Sa osnovnom dokumentacijom (preporu膷eno)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Datoteka ve膰 postoji. 沤elite li je koristiti?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron je periodi膷ni izvr拧itelj programa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Datoteku ve膰 koristi drugi loopback, izaberite neku drugu"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Morate imati root particiju.\n"
+"Za ovo, napravite jednu particiju (ili kliknite na neku od postoje膰ih).\n"
+"Zatim izaberite opciju ``Ta膷ka montiranja'' i postavite je na `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
+msgid "Proxy should be http://..."
+msgstr "Proxy treba biti http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tip datote膷nog sistema: "
+msgid "South Africa"
+msgstr "Ju啪na Afrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Veli膷ina u MB: "
+msgid "Western Sahara"
+msgstr "Zapadna Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "Izmjeni konfiguraciju 拧tampa膷a"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne mo啪e koristiti za loopback"
+msgid "Choose a partition"
+msgstr "Izaberi particiju"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
+msgid "Edit current rule"
+msgstr "Izmijeni trenutno pravilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "novi"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postoje膰i LVM na koji 膰ete dodati"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postoje膰i RAID na koji 膰ete dodati"
+msgid "Please test the mouse"
+msgstr "Molimo testirajte mi拧"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Premje拧tam particiju..."
+msgid "Other Media"
+msgstr "Drugi medij"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Premje拧tam"
+msgid "Backup system files"
+msgstr "Backup sistemskih datoteka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji sektor je 啪elite premjestiti?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk je 啪elite premjestiti?"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Premje拧tanje"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nova veli膷ina u MB: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Ne mo啪ete izabrati ovaj paket jer nema dovoljno prostora za njega"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "Izaberite novu veli膷inu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Napravi auto instalacijsku disketu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Smanji"
+msgid "Dialing mode"
+msgstr "Na膷in biranja broja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veli膷ine particije %s, svi podaci na njoj 膰e biti izgubljeni"
+msgid "File sharing"
+msgstr "Dijeljenje datoteka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
+msgid "Clean /tmp at each boot"
+msgstr "O膷isti /tmp prilikom svakog boota"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne mo啪ete mijenjati veli膷inu"
+msgid "Malawi"
+msgstr "Malavi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Izra膷unavam granice FAT filesistema"
+msgid "Please choose your type of mouse."
+msgstr "Molimo izaberite vrstu va拧eg mi拧a."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Gdje 啪elite montirati ure膽aj %s?"
+msgid "class of hardware device"
+msgstr "klasa hardverskog ure膽aja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti ta膷ku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr "Ovo su ra膷unari i mre啪e 膷iji lokalni 拧tampa膷i trebaju biti dostupni:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje 啪elite montirati ure膽aj %s?"
+msgid "United Kingdom"
+msgstr "Ujedinjeno Kraljevstvo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Gdje 啪elite montirati loopback datoteku %s?"
+msgid "running"
+msgstr "aktivan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
+msgid "default"
+msgstr "Podrazumijevano"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Koji datote膷ni sistem 啪elite?"
+msgid "Indonesia"
+msgstr "Indonezija"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
+msgid "France [SECAM]"
+msgstr "Francuska [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "ograni膷i"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "obavezno"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na ovoj particiji 膰e biti "
-"izgubljeni"
+"CUPS ne podr啪ava 拧tampa膷e na Novell serverima ili 拧tampa膷ekoji 拧alju podatke "
+"u komandama slobodnog oblika.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Komandna linija"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Ne mo啪ete napraviti novu particiju\n"
-"(po拧to ste dosegli maksimalan broj primarnih particija).\n"
-"Najprije uklonite primarnu particiju i napravite extended (pro拧irenu) "
-"particiju."
+"膶itav raspon Linux rje拧enja, kao i posebne ponude za proizvode i "
+"\"potrep拧tine\", dostupni su u na拧oj online radnji:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Preference: "
+msgid "access to administrative files"
+msgstr "pristup administrativnim datotekama"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Po膷etni sektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Gre拧ka tokom sendmaila.\n"
+" Va拧 mail izvje拧taj nije poslan.\n"
+" Molim podesite sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", vi拧enamjenski ure膽aj na paralelnom portu \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumenti: (val)\n"
+"\n"
+"Postavlja istek vremena shella. Vrijednost nula zna膷i bez isteka vremena."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
+msgid "Connecting to the Internet "
+msgstr "Spajam se na Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
+msgid "Restore Other"
+msgstr "Vrati ostalo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatiraj"
+msgid "TV card"
+msgstr "TV kartica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Detaljne informacije"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "艩tampa膷 na SMB/Windows 95/98/NT serveru"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Poku拧avam da spasim tabelu particija"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Ubacite disketu u jedinicu\n"
-"Svi podaci na toj disketi 膰e biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Upozorenje"
+"Argumenti: (umask)\n"
+"\n"
+"Postavlja root-ov umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Izaberite datoteku"
+msgid "Remove selected host/network"
+msgstr "Ukloni izabrani ra膷unar/mre啪u"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Backup tabela particija nema istu veli膷inu\n"
-"Ipak nastavljate?"
+"Postfix je Mail Transport Agent, tj. program koji 拧alje po拧tu sa jednog "
+"ra膷unara na drugi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
+msgid "Disconnection from the Internet failed."
+msgstr "Prekid veze sa Internetom nije uspio."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Ponovo u膷itaj tabelu particija"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Ovdje mo啪ete izabrati tipku ili kombinaciju tipki koja 膰e\n"
+"izvr拧iti prebacivanje izme膽u raznih rasporeda tastature\n"
+"(npr: latini膷ni i ne-latini膷ni)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
+msgid "Network Hotplugging"
+msgstr "Network Hotplugging"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
+msgid "if set to yes, reports check result to tty."
+msgstr "ako je postavljeno na da, prijavljuje rezultate provjere na tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
+msgid "Restore From CD"
+msgstr "Vrati sa CDa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Da biste imali jo拧 particija, molimo pobri拧ite jednu kako bi se mogla "
-"kreirati extended particija"
+"Sada 膰ete konfigurisati va拧 ra膷unar za dijeljenje Internet konekcije.\n"
+"Sa ovom opcijom, ostali ra膷unari na va拧oj lokalnoj mre啪i 膰e mo膰i koristiti "
+"Internet konekciju ovog ra膷unara. \n"
+"\n"
+"Prije nego 拧to nastavite, provjerite da li ste podesili va拧 mre啪ni/internet "
+"pristup koriste膰i drakconnect.\n"
+"\n"
+"Napomena: potreban vam je poseban Mre啪ni adapter da biste podesili Lokalnu "
+"mre啪u (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati vi拧e particija"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Molimo izaberite koji mre啪ni adapter 啪elite koristiti za spajanje na Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
+"Pristup foto memorijskoj kartici na va拧em HP multifunkcionalnom ure膽aju"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Unaprijedite performanse va拧eg ra膷unara uz pomo膰 na拧ih odabranih partnera "
+"koji pru啪aju profesionalna rje拧enja kompatibilna sa Mandrake Linuxom"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Auto alokacija"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Dijeljenje Internet konekcije je sada isklju膷eno."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Obri拧i sve"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "ako je postavljeno na da, provjerava checksum suid/sgid datoteka."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "沤elite li spasiti izmjene /etc/fstab"
+msgid "Latin American"
+msgstr "Latino-Ameri膷ka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
+msgid "Japanese text printing mode"
+msgstr "Japanski re啪im 拧tampanja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Izlaz bez spa拧avanja"
+msgid "Old device file"
+msgstr "Stara datoteka ure膽aja"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
+msgid "Button `%s': %s"
+msgstr "Dugme '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
+msgid "Please wait"
+msgstr "Molimo sa膷ekajte"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Poni拧ti"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Izlaz"
+msgid "None"
+msgstr "Ni拧ta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
+msgid "The entered IP is not correct.\n"
+msgstr "Unesena IP adresa nije ispravna.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
+msgid "Ethernet Card"
+msgstr "Ethernet kartica"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Promijeni tip"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Tra啪i servere"
+msgid "Install"
+msgstr "Instalacija"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Domena"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Kliknite na \"Dalje ->\" ako 啪elite obrisati sve podatke i particije koje\n"
+"su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na\n"
+"\"Dalje ->\" ne膰ete mo膰i vratiti podatke i particije koji se trenutno "
+"nalaze\n"
+"na ovom hard disku, uklju膷uju膰i i sve Windows podatke.\n"
+"\n"
+"Kliknite na \"<- Nazad\" da obustavite ovu operaciju bez gubitka\n"
+"podataka i particija na ovom hard disku."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Korisni膷ko ime"
+msgid "Exit install"
+msgstr "Napusti instalaciju"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Molim unesite va拧e korisni膷ko ime, 拧ifru i domen da biste pristupili ovom "
-"ra膷unaru."
+"Sve je konfigurisano.\n"
+"Sada mo啪ete dijeliti Internet konekciju sa ostalim ra膷unarima na va拧oj "
+"lokalnoj mre啪i, koriste膰i automatsku mre啪nu konfiguraciju (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Potrebna je autentikacija na domeni"
+msgid "Remote CUPS server"
+msgstr "Udaljeni CUPS server"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "Jo拧 jedan"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Koje korisni膷ko ime"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Trenutno je samo jedan mre啪ni adapter pode拧en na va拧em sistemu:\n"
+"\n"
+"%s\n"
+"\n"
+"Sada 膰u podesiti va拧u Lokalnu mre啪u sa ovim adapterom."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ne mogu se prijaviti koriste膰i korisni膷ko ime %s (pogre拧na 拧ifa?)"
+msgid "Minimal install"
+msgstr "Minimalna instalacija"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Ethiopia"
+msgstr "Etiopija"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus kontroleri"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB kontroleri"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci devices: ovo daje PCI slot, ure膽aj i funkciju ove kartice\n"
+"- eide devices: ure膽aj mo啪e biti master ili slave\n"
+"- scsi devices: SCSI id-ovi za: bus i device"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI kontroleri"
+msgid "Total size: %d / %d MB"
+msgstr "Ukupna veli膷ina: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire kontroleri"
+msgid "disabled"
+msgstr "isklju膷en"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontroleri"
+msgid "Search for new scanners"
+msgstr "Tra啪enje novih skenera"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "Isklju膷ujem servere..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Skener"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Izaberite vremenski interval\n"
+"izme膽u svakog backupa"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Nepoznat/Ostali"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalacija %sa nije uspjela. Javila se sljede膰a gre拧ka:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Mostovi (bridges) i sistemski kontroleri"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Ne mogu izvr拧iti mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Izabrali ste sljede膰i server (servere): %s\n"
+"\n"
+"\n"
+"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
+"sigurnosnih\n"
+"problema, ali mo啪da 膰e biti prona膽eni u budu膰nosti. U tom slu膷aju, morate "
+"ih\n"
+"upgrade-ovati 拧to prije bude mogu膰e.\n"
+"\n"
+"\n"
+"Da li zaista 啪elite instalirati ove servere?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet kartica"
+msgid "Network printer (TCP/Socket)"
+msgstr "Mre啪ni 拧tampa膷 (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Procesori"
+msgid "Backup User files..."
+msgstr "Backup-uj korisni膷ke datoteke..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Web kamera"
+msgid "Install system"
+msgstr "Sistem instalacije"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Zvu膷na kartica"
+msgid "First DNS Server (optional)"
+msgstr "Prvi DNS server (opcionalno)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Drugi multimedijalni ure膽aj"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Alternativno, mo啪ete nasvesti naziv ure膽aja / naziv datoteke na ulaznoj "
+"liniji"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV kartica"
+msgid "dhcpd Config..."
+msgstr "dhcpd pode拧avanje..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Video kartica"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Pode拧avanje je ve膰 zavr拧eno, ali je trenutno isklju膷eno."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "Traka"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub instalacija"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Izraelska"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD pr啪ilica"
+msgid "load setting"
+msgstr "postavka optere膰enja"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "艩tampa膷 \"%s\" na serveru \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disk"
+msgid "Floppy can be removed now"
+msgstr "Sada mo啪ete izvaditi disketu"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimalna instalacija"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disketa"
+msgid "Denmark"
+msgstr "Danska"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Dozvoli da odaberem bilo koji drajver"
+msgid "Moving partition..."
+msgstr "Premje拧tam particiju..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Drajver:"
+msgid "(This) DHCP Server IP"
+msgstr "IP adresa (ovog) DHCP servera"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Ako stvarno mislite da znate koji drajver je odgovaraju膰i za va拧u karticu\n"
-"mo啪ete odabrati jedan sa gornje liste.\n"
-"\n"
-"Trenutni drajver za va拧u \"%s\" zvu膷nu karticu je \"%s\""
+msgid "Test of the configuration"
+msgstr "Testiranje konfiguracije"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Slobodan izbor drajvera"
+msgid "Installing %s ..."
+msgstr "Instaliram %s..."
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Klasi膷ni na膷in utvr膽ivanja bugova u zvu膷nom sistemu je izvr拧avanje\n"
-"sljede膰ih naredbi:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" 膰e vam re膰i koji drajver koristi va拧a\n"
-"kartica ina膷e\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" 膰e vam re膰i koji drajver je\n"
-"trenutno u upotrebi\n"
+"Ako ste naveli da 啪elite individualno izabrati pakete, bi膰e vam prikazano\n"
+"stablo koje sadr啪i sve pakete klasifikovane po grupama i podgrupama.\n"
+"Pregledaju膰i stablo, mo啪ete izabrati 膷itave grupe, podgrupe ili "
+"individualne\n"
+"pakete.\n"
"\n"
-"- sa \"/sbin/lsmod\" mo啪ete provjeriti da li je modul (drajver) u膷itan\n"
-"ili ne\n"
+"Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji\n"
+"vam obja拧njava svrhu paketa.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" vam\n"
-"govori da li su servisi sound i alsa pode拧eni da se pokre膰u na\n"
-"initlevel 3\n"
+"!! Ako izaberete neki serverski paket, zato 拧to ste specifi膷no izabrali taj\n"
+"paket ili zato 拧to je on dio grupe paketa, bi膰ete zamoljeni da potvrdite da\n"
+"zaista 啪elite da taj server bude instaliran. Mandrake Linux obi膷no "
+"automatski\n"
+"pokre膰e sve instalirane servise prilikom pokretanja sistema. 膶ak i ako su\n"
+"sigurni i nemaju poznatih problema u trenutku pakovanja distribucije,\n"
+"sasvim je mogu膰e da su neke sigurnosne rupe otkrivene nakon 拧to je\n"
+"dovr拧ena ova verzija Mandrake Linuxa. Ako niste sigurni 膷emu ta膷no\n"
+"slu啪i taj paket ili za拧to ga treba instalirati, kliknite na \"Ne\". Klikanje "
+"na\n"
+"\"Da\" 膰e instalirati navedene servise i oni 膰e biti automatski pokrenuti\n"
+"tokom pokretanja sistema. !!\n"
"\n"
-"- \"aumix -q\" 膰e vam re膰i da li je zvuk uti拧an (muted) ili ne\n"
+"Opcija \"Automatske zavisnosti\" se koristi da bi se isklju膷io dijalog "
+"upozorenja\n"
+"koji se pojavljuje svaki put kada instalacioni program automatski izabere\n"
+"neki paket kako bi razrije拧io neku zavisnost. Pojedini paketi imaju "
+"zavisnost\n"
+"jedan od drugog u smislu da instalacija jednog paketa tra啪i da bude "
+"instaliran\n"
+"i drugi. Instalacioni program mo啪e odrediti koji paketi su potrebni da bi "
+"se\n"
+"zadovoljila zavisnost i uspje拧no zavr拧ila instalacija.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvu膷nu "
-"karticu.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Rje拧avanje problema sa zvukom"
+"Mala ikona sa disketom na dnu liste vam omogu膰uje da u膷itate listu paketa\n"
+"koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako 啪elite "
+"da\n"
+"imate nekoliko ra膷unara koji su identi膷no pode拧eni. Nakon klika na ovu "
+"ikonu\n"
+"bi膰ete zamoljeni da u disketnu jedinicu stavite disketu napravljenu tokom "
+"ranije\n"
+"instalacije. Pogledajte drugi savjet na zadnjem koraku da biste saznali kako "
+"se\n"
+"pravi ova disketa."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Gre拧ka: Drajver \"%s\" za va拧u zvu膷nu karticu nije na listi"
+msgid "Choose your filesystem encryption key"
+msgstr "Izaberite va拧 klju膷 za kodiranje datote膷nog sistema"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Nepoznat drajver"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Molim izaberite va拧 CD/DVD ure膽aj\n"
+"(Pritisnite Enter za propagaciju postavki na ostala polja. \n"
+"Ovo polje nije obavezno, ono je samo alat za popunjavanje formulara.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nema poznatih drajvera za va拧u zvu膷nu karticu (%s)"
+msgid "Andorra"
+msgstr "Andora"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Nema nijedan poznat drajver"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nema slobodnih drajvera za va拧u zvu膷nu karticu (%s), ali postoji vlasni膷ki "
-"drajver na \"%s\"."
+msgid "Botswana"
+msgstr "Bocvana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Nema open source drajver"
+msgid "(default value: %s)"
+msgstr " (default vrijednost: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo sa膷ekajte... Primjenjujem konfiguraciju"
+msgid "Alternative test page (Letter)"
+msgstr "Alternativna testna strana (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Stari \"%s\" drajver je na crnoj listi.\n"
+"Pode拧avanje DHCP servera.\n"
"\n"
-"Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n"
+"Ovdje mo啪ete izabrati razli膷ite opcije za pode拧avanje DHCP servera.\n"
+"Ako ne znate zna膷enje neke opcije, jednostavno je ostavite kako jeste.\n"
"\n"
-"Stoga 膰e novi drajver \"%s\" biti kori拧ten tek nakon idu膰eg pokretanja "
-"sistema."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Uklanjanje problema"
+msgid "Choose an X server"
+msgstr "Izaberite X server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od "
-"operativnog sistema (dostupan je na ve膰ini UNIX sistema), ali je vrlo "
-"elementaran i ograni膷en.\n"
-"Pored toga, svi OSS drajveri ponovo izmi拧ljaju to膷ak.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n"
-"podr啪ava prili膷no velik broj ISA, USB i PCI kartica.\n"
-"\n"
-"Ona tako膽e pru啪a mnogo vi拧i API nego OSS.\n"
-"\n"
-"Da biste koristili ALSA, mo啪ete koristiti:\n"
-"- stari API kompatibilan sa OSSom\n"
-"- novi ALSA API koji pru啪a mnoge napredne mogu膰nosti, ali zahtijeva upotrebu "
-"ALSA biblioteke.\n"
+msgid "Swap partition size in MB: "
+msgstr "Veli膷ina swap particije u MB:"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"\n"
-"\n"
-"Va拧a kartica trenutno koristi %s \"%s\" drajver (uobi膷ajeni drajver za va拧u "
-"karticu je \"%s\")"
+"Drugi (ne drakbackup)\n"
+"klju膷evi su ve膰 na mjestu"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Ovdje mo啪ete izabrati alternativni drajver (ili OSS ili ALSA) za va拧u zvu膷nu "
-"karticu (%s)."
+msgid "No changes to backup!"
+msgstr "Nema izmjena na backupu!"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Pode拧avanje zvuka"
+msgid "Formatted\n"
+msgstr "Formatirana\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Nema nijedan poznat OSS/ALSA alternativni drajver za va拧u zvu膷nu karticu (%"
-"s) koja trenutno koristi \"%s\""
+msgid "Type of install"
+msgstr "Vrsta instalacije"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Nema alternativnog drajvera"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "艩tampa膷 \"%s\" na SMB/Windows serveru \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "uklju膷i radio podr拧ku"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Demon (%s) uklju膷uje :\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "Podr拧ka za radio:"
+msgid "%d comma separated numbers"
+msgstr "%d brojeva razdvojenih zarezom"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL postavka:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"Rusers protokol omogu膰ava korisnicima na mre啪i da identificiraju\n"
+"ko je prijavljen na ostalim ra膷unarima."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "broj capture buffera za mmap-ovani capture"
+msgid "Automatic Steps Configuration"
+msgstr "Automatska konfiguracija koraka"
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Broj capture buffera:"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"沤elite li saznati vi拧e i doprinijeti Open Source zajednici? Uklju膷ite se u "
+"svijet Slobodnog softvera!"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Vrsta tunera:"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card model:"
-msgstr "Model kartice:"
+msgid "Please select data to backup..."
+msgstr "Molim izaberite podatke za backup..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Za ve膰inu modernih TV kartica, bttv modul Linux kernela automatski "
-"prepoznaje odgovaraju膰e parametre.\n"
-"Ako je va拧a kartica pogre拧no prepoznata, ovdje mo啪ete prisiliti odgovaraju膰i "
-"tip tunera i kartice. Samo izaberite parametre va拧e TV karte."
+"Konekcija nije uspjela.\n"
+"Provjerite konfiguraciju u Mandrake Kontrolnom centru."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Nepoznat|Op拧ti"
+msgid "received"
+msgstr "primljeno"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Nepoznat|CPH06X (bt878) [razni proizvo膽a膷i]"
+msgid "/File/_New"
+msgstr "/Datoteka/_Nova"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Nepoznat|CPH05X (bt878) [razni proizvo膽a膷i]"
+msgid "The DNS Server IP"
+msgstr "IP adresa DNS servera"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect"
-msgstr "Auto prepoznavanje"
+msgid "IP Range End:"
+msgstr "Kraj IP raspona:"
-#: ../../interactive/newt.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Do"
-msgstr "Uradi"
+msgid "High"
+msgstr "Visok"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va拧 izbor? (podrazumjevano %s)"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Pogre拧an izbor, poku拧ajte ponovo\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Ovo polje opisuje ure膽aj"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Ponovo po拧alji"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Dodajem 拧tampa膷 u Star Office/OpenOffice.org/GIMP"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Primjetite, label je promijenjena:\n"
-"%s"
+msgid "Local Printers"
+msgstr "Lokalni 拧tampa膷i"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molimo unesite prvi broj od deset koji 啪elite izmjeniti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Va拧 izbor?"
+msgid "Installation image directory"
+msgstr "Direktorij instalacionog image-a"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari od kojih mo啪ete izabrati (%s).\n"
+msgid "NIS Server"
+msgstr "NIS server"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va拧 izbor? (podrazumjevano '%s' %s)"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " unesite `void' za prazan unos"
+msgid "Spain"
+msgstr "艩panija"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Da li 啪elite kliknuti na ovo dugme?"
+msgid "This user name has already been added"
+msgstr "Ovo korisni膷ko ime je ve膰 dodano"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Dugme '%s': %s"
+msgid "Choose a file"
+msgstr "Izaberi datoteku"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va拧 izbor? (0/1, podrazumjevano %s)"
+msgid "Apply"
+msgstr "Primjeni"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Stavke koje morate popuniti:\n"
-"%s"
+msgid "Auto-detect available ports"
+msgstr "Auto prepoznavaj dostupne portove"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"U膷itavanje modula %s nije uspjelo.\n"
-"沤elite li probati opet sa drugim parametrima?"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Navedi opcije"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Ispitivanje"
+msgid "Belgium"
+msgstr "Belgija"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slu膷ajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obi膷no radi dobro i bez njih. 沤elite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita va拧 ra膷unar za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje mo啪e zaglaviti ra膷unar,\n"
-"ali ne bi trebalo izazvati nikakvu 拧tetu."
+msgid "Kuwait"
+msgstr "Kuvajt"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver 膰u poku拧ati?"
+msgid "Choose the window manager to run:"
+msgstr "Izaberite window manager koji 膰e se pokretati:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Opcije modula"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Podgeneracija procesora"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada mo啪ete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
+msgid "First Time Wizard"
+msgstr "膶arobnjak za prvo pokretanje"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Sada mo啪ete navesti opcije za modul %s.\n"
-"Obratite pa啪nju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+"Do拧lo je do gre拧ke, ali ne znam kako da je rije拧im fino.\n"
+"Nastavite na vlastiti rizik."
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
+msgid "please wait, parsing file: %s"
+msgstr "molim sa膷ekajte, parsiram datoteku: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
+msgid "Taiwan"
+msgstr "Tajvan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+"Da biste mogli 拧tampati sa va拧im Lexmark inkjetom na ovoj konfiguraciji, "
+"potrebni su vam inkjet drajveri za 拧tampu koje obezbje膽uje Lexmark (http://"
+"www.lexmark.com/). Kliknite na link \"Drivers\". Zatim izaberite va拧 model a "
+"zatim \"Linux\" kao operativni sistem. Drajveri dolaze u vidu RPM paketa ili "
+"shell skripte sa interaktivnom grafi膷kom instalacijom. Ne morate obaviti ovu "
+"konfiguraciju na grafi膷kom interfejsu. Odustanite odmah nakon licencnog "
+"ugovora. Zatim od拧tampajte stranice za poravnavanje glava sa "
+"\"lexmarkmaintain\" i podesite opcije poravnanja glave pomo膰u ovog programa."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Prona膽eno %s %s interfejsa"
+msgid "Permissions"
+msgstr "Privilegije"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ovdje mo啪ete podesiti svaki parametar modula."
+msgid "Provider name (ex provider.net)"
+msgstr "Naziv provajdera (npr. provajder.net)"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "tekst razdvojen zarezima"
+msgid "Version: %s\n"
+msgstr "Verzija: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "brojevi razdvojeni zarezom"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Va拧em sistemu ponestaje resursa. Mo啪da imate neki problem sa instalacijom\n"
+"Mandrake Linuxa. Ako se ovo desi, mo啪ete poku拧ati tekstualnu instalaciju. Za "
+"ovo,\n"
+"pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'."
-#: ../../modules/parameters.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d stringova razdvojenih zarezom"
+msgid "Use the Windows partition for loopback"
+msgstr "Koristi Windows particiju za loopback"
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d brojeva razdvojenih zarezom"
+msgid "Armenian (typewriter)"
+msgstr "Armenska (pisa膰a ma拧ina)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "a number"
-msgstr "broj"
+msgid "Connection type: "
+msgstr "Tip konekcije: "
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Potreban vam je Alcatel-ov mikrokod.\n"
-"Mo啪ete ga downloadovati na\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"zatim kopirajte mgmt.o u /usr/share/speedtouch"
+msgid "Graphical interface"
+msgstr "Grafi膷ki interfejs"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Naj膷e拧膰i na膷in za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
-"Ako ne znate, izaberite 'koristi pppoe'"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s sa 3D hardverskim ubrzanjem"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
+msgid "India"
+msgstr "Indija"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (koriste膰i pppoa) usb"
+msgid "Chad"
+msgstr "膶ad"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Slovakia"
+msgstr "Slova膷ka"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "koristi dhcp"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "koristi pptp"
+msgid "Cambodia"
+msgstr "Kambo膽a"
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "koristi pppoe"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor HorizSync: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Other ports"
-msgstr "Ostali portovi"
+msgid "Path"
+msgstr "Staza"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Sve (bez firewalla)"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
+"Ovdje mo啪ete navesti bilo koju komandnu liniju kojoj 膰e biti proslje膽en "
+"zadatak umjesto direktnog slanja na 拧tampa膷."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Zadan je neispravan port: %s.\n"
-"Odgovaraju膰i format je \"port/tcp\" ili \"port/udp\", \n"
-"gdje je \"port\" cijeli broj izme膽u 1 i 65535."
+"Sistem za 拧tampu (%s) se ne膰e pokrenuti automatski prilikom boota ra膷unara.\n"
+"\n"
+"Mogu膰e je da je automatsko pokretanje isklju膷eno prilikom promjene na vi拧i "
+"nivo sigurnosni, po拧to je sistem za 拧tampu mogu膰a ta膷ka napada.\n"
+"\n"
+"Da li 啪elite da ponovo uklju膷ite automatsko pokretanje sistema za 拧tampu?"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"Mo啪ete unijeti raze portove. \n"
-"Primjeri ispravnih unosa su: 139/tcp 139/udp.\n"
-"Pogledajte datoteku /etc/services za vi拧e informacija."
+"艩tampa膷 %s\n"
+"艩ta 啪elite da izmjenite na ovom 拧tampa膷u?"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Kojim servisima 啪elite dozvoliti pristup sa Interneta?"
+msgid "Add host"
+msgstr "Dodaj ra膷unar"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"drakfirewall pode拧iva膷\n"
+"Ako stvarno mislite da znate koji drajver je odgovaraju膰i za va拧u karticu\n"
+"mo啪ete odabrati jedan sa gornje liste.\n"
"\n"
-"Prije nego 拧to nastavite, provjerite da li ste ispravno podesili pristup\n"
-"mre啪i/Internetu pomo膰u alata drakconnect."
+"Trenutni drajver za va拧u \"%s\" zvu膷nu karticu je \"%s\""
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"drakfirewall pode拧ava膷\n"
+"沤elite li dozvoliti korisnicima da dijele (share) neke od njihovih "
+"direktorija?\n"
+"Ako uklju膷ite ovu opciju, korisnici 膰e mo膰i jednostavno kliknuti na opciju "
+"\"Share\" u\n"
+"Konqueroru ili Nautilusu.\n"
"\n"
-"On pode拧ava li膷ni firewall za ovaj Mandrake Linux ra膷unar.\n"
-"Za mo膰nu soluciju posebnog firewalla, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "No network card"
-msgstr "Nema mre啪ne kartice"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP i IMAP server"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "Mail server"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Domain Name Server"
-msgstr "DNS server"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Web Server"
-msgstr "Web server"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf ime ra膷unara ne smije sadr啪avati ."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Host name"
-msgstr "Host name"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Ime ra膷unara"
+"\"Prilago膽eno\" vam omogu膰uje da podesite ovu opciju zasebno za svakog "
+"korisnika.\n"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-"\n"
-"\n"
-"Unesite Zeroconf ime ra膷unara bez ta膷aka ako ne 啪elite\n"
-"da koristite ponu膽eno ime ra膷unara."
+"Molimo izaberite u膷itaj ili spasi izbor paketa na disketu.\n"
+"Format je isti kao i diskete koje generi拧e auto_install."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuring network"
-msgstr "Pode拧avam mre啪u"
+msgid "China (broadcast)"
+msgstr "Kina (broadcast)"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Molimo izaberite koji mre啪ni adapter 啪elite koristiti za spajanje na Internet"
+msgid "Use quota for backup files."
+msgstr "Koristi quotu za backup datoteke."
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Izaberite mre啪ni interface"
+msgid "Configuring printer \"%s\"..."
+msgstr "Pode拧avam 拧tampa膷 \"%s\"..."
-#: ../../network/ethernet.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije prona膽en ethernet mre啪ni adapter na va拧em sistemu.\n"
-"Ne mogu podesiti ovu vrstu konekcije."
+msgid "Internet connection"
+msgstr "Internet konekcija"
-#: ../../network/ethernet.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Koji dhcp klijent 啪elite koristiti?\n"
-"Podrazumjevani je dhcp-client"
+"U膷itavanje modula %s nije uspjelo.\n"
+"沤elite li probati opet sa drugim parametrima?"
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nije prona膽ena nijedna ISDN PCI kartica. Molimo izaberite jednu na idu膰em "
-"ekranu."
+msgid "Welcome to the Open Source world."
+msgstr "Dobro do拧li u svijet otvorenog izvornog koda."
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Bosnia and Herzegovina"
+msgstr "Bosna i Hercegovina"
+
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
-"karticu na idu膰em ekranu."
+"Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu "
+"ta膷ku montiranja\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Koja od navedenih je va拧a ISDN kartica?"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Morate unijeti ime ra膷unara ili IP.\n"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Pode拧avanje ISDNa"
+msgid "Netherlands"
+msgstr "Nizozemska"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Prekid"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "艩aljem datoteke..."
#: ../../network/isdn.pm:1
#, c-format
-msgid "Continue"
-msgstr "Nastavak"
+msgid "Internal ISDN card"
+msgstr "Interna ISDN kartica"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idu膰em ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, mora膰ete znati IRQ i IO va拧e kartice.\n"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
+"Nema nijedan poznat OSS/ALSA alternativni drajver za va拧u zvu膷nu karticu (%"
+"s) koja trenutno koristi \"%s\""
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Title"
+msgstr "Naslov"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
+msgid "Install & convert Fonts"
+msgstr "Instaliraj i konvertuj fontove"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Prona拧ao sam interfejs \"%s\". 沤elite li ga koristiti ?"
+msgid "WARNING"
+msgstr "UPOZORENJE"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Koji protokol 啪elite koristiti?"
+msgid "Installing bootloader"
+msgstr "Instaliram bootloader"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
+msgid "replay"
+msgstr "ponovi"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
+msgid "detected %s"
+msgstr "detektovan %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Evropski protokol"
+msgid "Virgin Islands (U.S.)"
+msgstr "Djevi膷anska ostrva (SAD)"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
+msgid "Bad backup file"
+msgstr "Lo拧a backup datoteka"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Izaberite va拧eg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
+"Dijeljenje Internet konekcije je ve膰 pode拧eno. Trenutno je\n"
+"neaktivno (isklju膷eno).\n"
+"\n"
+"艩ta 啪elite uraditi?"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "Unesite IP adresu i port ra膷unara 膷ije 拧tampa膷e 啪elite koristiti."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
+msgid "Pipe into command"
+msgstr "Spoji (pipe) na komandu"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Koje je vrste va拧a ISDN konekcija?"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Neki dio hardware-a na va拧em ra膷unaru zahtjeva ``vlasni膷ke'' drajvere za "
+"rad.\n"
+"Mo啪ete na膰i vi拧e podataka o njima na: %s"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "膶arobnjak za pode拧avanje mre啪e"
+msgid "Detecting devices..."
+msgstr "Prepoznajem ure膽aje..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
+msgid "Click here to launch the wizard ->"
+msgstr "Kliknite ovdje za pokretanje 膷arobnjaka ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"Description of the fields:\n"
"\n"
-"We recommand the light configuration.\n"
msgstr ""
-"Koju ISDN konfiguraciju 啪elite?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. On sadr啪i mo膰ne alate,\n"
-" ali ga je te拧ko podesiti i nije standardiziran.\n"
-"\n"
-"* Novu konfiguraciju je lak拧e razumjeti, standardnija je,\n"
-" ali ima manje alata.\n"
+"Opis polja:\n"
"\n"
-"Preporu膷ujemo light konfiguraciju.\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do nothing"
-msgstr "Nemoj raditi ni拧ta"
+msgid "the name of the CPU"
+msgstr "naziv procesora"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Instaliraj RPM"
+msgid "Refreshing printer data..."
+msgstr "Osvje啪avam podatke o 拧tampa膷u..."
-#: ../../network/modem.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"Otkrio sam winmodem baziran na \"%s\" chipsetu, 啪elite li instalirati "
-"odgovaraju膰i software ?"
+msgid "You must also format %s"
+msgstr "Morate tako膽e formatirati i %s"
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Title"
-msgstr "Naslov"
+msgid "Be careful: this operation is dangerous."
+msgstr "Budite oprezni: ova operacija je opasna."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Va拧 modem nije podr啪an pod ovim sistemom.\n"
-"Pogledajte http://www.linmodems.org"
+msgid "Insert a floppy containing package selection"
+msgstr "Ubacite disketu koja sadr啪i izbor paketa"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
+msgid "Server: "
+msgstr "Server:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
+msgid "Security Alerts:"
+msgstr "Sigurnosna upozorenja:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Ime domena"
+msgid "Sweden"
+msgstr "艩vedska"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Use Expect for SSH"
+msgstr "Koristi Expect za SSH"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skripta"
+msgid "Poland"
+msgstr "Poljska"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal"
+msgid "Importance: %s\n"
+msgstr "Zna膷aj: %s\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Molim uklju膷ite ako 啪elite izbaciti traku nakon backupa."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Login ID"
+msgid "Other ports"
+msgstr "Ostali portovi"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Broj telefona"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "broj capture buffera za mmap-ovani capture"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Naziv konekcije"
+msgid "SMBus controllers"
+msgstr "SMBus kontroleri"
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dialup options"
-msgstr "Opcije dialupa"
+msgid "Connection timeout (in sec)"
+msgstr "Timeout konekcije (u sek.)"
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molimo izaberite na koji serijski port je naka膷en va拧 modem."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr "Neki rani i486DX-100 chipovi "
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Pode拧avanje mre啪e"
+msgid "Croatian"
+msgstr "Hrvatska"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Koristi postoje膰u particiju"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Do拧lo je do problema prilikom pode拧avanja.\n"
-"Provjerite va拧u konekciju pomo膰u net_monitor ili mcc. Ako va拧a konekcija ne "
-"radi, mo啪ete ponovo pokrenuti pode拧avanje"
+msgid "Unable to contact mirror %s"
+msgstr "Ne mogu pristupiti mirroru %s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon 拧to je to gotovo, preporu膷ujemo da restartujete va拧 X\n"
-"okoli拧 kako bi se izbjegao problem sa promjenom naziva ra膷unara."
+msgid "/Help/_About..."
+msgstr "/Pomo膰/_O programu..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"膶estitamo, pode拧avanje mre啪e i interneta je zavr拧eno.\n"
-"\n"
-"Sada 膰e ova konfiguracija biti primjenjena na va拧 sistem.\n"
+msgid "Remove user directories before restore."
+msgstr "Pobri拧i korisni膷ke direktorije prije vra膰anja."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Do拧lo je do problema prilikom restartovanja mre啪e:\n"
-"\n"
-"%s"
+"Sada 膰ete podesiti udaljeni 拧tampa膷. Ovo zahtjeva aktivan pristup mre啪i, ali "
+"va拧a mre啪a jo拧 uvijek nije pode拧ena. Ako 啪elite nastaviti bez pode拧avanja "
+"mre啪e, ne膰ete mo膰i koristiti 拧tampa膷 koji sada pode拧avate. Kako 啪elite da "
+"nastavimo?"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Potrebno je restartovati mre啪u. 沤elite li je restartovati?"
+msgid "CUPS printer configuration"
+msgstr "Pode拧avanje CUPS 拧tampa膷a"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration"
-msgstr "Pode拧avanje mre啪e"
+msgid "could not find any font in your mounted partitions"
+msgstr "ne mogu na膰i nijedan font na montiranim particijama"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li 啪elite pokrenuti konekciju prilikom boota?"
+msgid "F00f bug"
+msgstr "F00F bug"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internet konekcija"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"Podesili ste nekoliko na膷ina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji 膰ete koristiti.\n"
-"\n"
+"Koji dhcp klijent 啪elite koristiti?\n"
+"Podrazumjevani je dhcp-client"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite konekciju koju 啪elite podesiti"
+msgid "Domain Name:"
+msgstr "Ime domena:"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "prepoznata ethernet kartica(e)"
+msgid "On Floppy"
+msgstr "Na disketi"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN konekcija"
+msgid "Restore"
+msgstr "Vrati"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "otkrivena kablovska konekcija"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"ako je postavljeno na da, provjerava da li su mre啪ni ure膽aji u "
+"promiskuitetnom modu."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
+msgid "Looking for available packages..."
+msgstr "Tra啪im dostupne pakete..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected"
-msgstr "detektovan"
+msgid "Init Message"
+msgstr "Init poruka"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
+msgid "Rescue partition table"
+msgstr "Spasi tabelu particija"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "detected %s"
-msgstr "detektovan %s"
+msgid "Connection complete."
+msgstr "Konekcija zavr拧ena."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
+msgid "Cyprus"
+msgstr "Kipar"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem konekcija"
+msgid "Remove from RAID"
+msgstr "Ukloni sa RAIDa"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detektovan na portu %s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Ovaj klju膷 enkripcije je previ拧e jednostavan (mora imati najmanje %d "
+"karaktera)"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Configuration Wizards"
+msgstr "膶arobnjaci za pode拧avanje"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
+msgid "ISDN connection"
+msgstr "ISDN konekcija"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Prepoznajem ure膽aje..."
+msgid "primary"
+msgstr "primarni"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "na SMB/Windows serveru \"%s\", share \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Ovim dijalogom mo啪ete izabrati koje servise 啪elite pokretati prilikom "
+"boota.\n"
+"\n"
+"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
+"instalaciji. Pregledajte ih pa啪ljivo i isklju膷ite sve one koji nisu "
+"potrebni\n"
+"prilikom boota.\n"
+"\n"
+"Kada izaberete servis dobi膰ete kratki tekst koji obja拧njava taj servis\n"
+"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
+"mijenjate predlo啪eni izbor.\n"
+"\n"
+"!! Budite vrlo pa啪ljivi sa ovim korakom ako namjeravate koristiti va拧 "
+"ra膷unar\n"
+"kao server: vjerovatno ne 啪elite da pokrenete neke servise koji vam ne\n"
+"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
+"ako su aktivni na serveru. Op膰enito, izaberite samo one servise koji vam\n"
+"stvarno trebaju. !!"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Koristi auto prepoznavanje"
+msgid "Skip"
+msgstr "Presko膷i"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za pode拧avanje"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Dobro do拧li u 膶arobnjak za pode拧avanje mre啪e\n"
-"\n"
-"Sada 膰emo podesiti va拧u internet/mre啪nu konekciju.\n"
-"Ako ne 啪elite da koristite automatsko prepoznavanje, isklju膷ite opciju.\n"
+"Aktivira/deaktivira sve mre啪ne interfejse koji su konfigurisani\n"
+"za pokretanje tokom boota."
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Po拧to radite mre啪nu instalaciju, va拧a mre啪a je ve膰 pode拧ena.\n"
-"Kliknite na Ok da zadr啪ite tu konfiguraciju ili Odustani za pode拧avanje va拧e "
-"Internet & Mre啪ne konekcije.\n"
+"Frekvencija CPUa u MHz (Megaherc je jedinica koja se mo啪e pribli啪no "
+"usporediti sa brojem instrukcija koje CPU izvr拧ava u sekundi)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "important"
+msgstr "va啪no"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "Ukupan napredak"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakX 膰e najprije potra啪iti sve IDE ure膽aje prisutne na va拧em ra膷unaru. "
+"Tako膽er\n"
+"膰e pretra啪iti sistem za jednu ili vi拧e PCI SCSI kartica. Ako SCSI kartica "
+"bude\n"
+"prona膽ena, DrakX 膰e automatski instalirati odgovaraju膰i drajver.\n"
"\n"
+"Budu膰i da pronala啪enje hardware-a nikad nije savr拧eno, DrakX mo啪da ne膰e\n"
+"prona膰i va拧e hard diskove. Ako se to desi, mora膰ete ih navesti ru膷no.\n"
"\n"
+"Ako je potrebno da ru膷no odaberete PCI SCSI adapter, DrakX 膰e vas pitati\n"
+"da li 啪elite navesti neke opcije za njega. Trebate dopustiti DrakXu da "
+"ispita\n"
+"hardware za neke opcije specifi膷ne za tu karticu. Ovo obi膷no radi dobro.\n"
"\n"
-"Sada 膰emo podesiti konekciju %s.\n"
-"\n"
-"\n"
-"Pritisnite OK za nastavak."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada 膰emo podesiti konekciju %s."
+"Ako DrakX ne mo啪e ispitati opcije koje trebaju biti proslije膽ene, mora膰ete\n"
+"ru膷no navesti opcije za drajver."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija & pode拧avanje"
+msgid "Users"
+msgstr "Korisnici"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Prekini konekciju"
+msgid "Preparing bootloader..."
+msgstr "Pripremam bootloader..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Connect"
-msgstr "Konektuj me"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (tj. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo啪ete prekonfigurisati va拧u konekciju."
+msgid "The passwords do not match"
+msgstr "艩ifre se ne poklapaju"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo啪ete se spojiti na Internet ili prekonfigurisati va拧u konekciju."
+msgid "Examples for correct IPs:\n"
+msgstr "Primjeri ispravnih IPa:\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Trenutno niste konektovani na Internet."
+msgid "Frequency (MHz)"
+msgstr "Frekvencija (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"\n"
-"Mo啪ete se diskonektovati ili prekonfigurisati va拧u konekciju."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Trenutno ste spojeni na Internet."
+"Da koristite ovaj izbor spa拧enih paketa, bootajte instalaciju sa ``linux "
+"defcfg=floppy''"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL treba po膷injati sa 'ftp:' ili 'http:'"
+msgid "the number of the processor"
+msgstr "broj procesora"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
+msgid "Hardware clock set to GMT"
+msgstr "Hardverski sat pode拧en na GMT"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Give a file name"
+msgstr "Dajte naziv datoteke"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Molimo izaberite na koji port je priklju膷en va拧 拧tampa膷."
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
+msgid "Change Cd-Rom"
+msgstr "Promijenite CD-ROM"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway adresa treba biti u formatu 1.2.3.4"
+msgid "Paraguay"
+msgstr "Paragvaj"
-#: ../../network/network.pm:1
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresa DNS servera treba biti u formatu 1.2.3.4"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway ure膽aj"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Nema poznatih drajvera za va拧u zvu膷nu karticu (%s)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (tj. %s)"
+msgid "force"
+msgstr "prisili"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS server"
+msgid "Exit"
+msgstr "Izlaz"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"Molimo unesite naziv va拧eg ra膷unara ako ga znate.\n"
-"Naziv va拧eg ra膷unara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao 拧to je ``mojcomp.mojlab.mojafirma.com''.\n"
-"Mo啪ete tako膽er unijeti IP adresu gateway-a ako ga imate"
+"NAPOMENA: Ovisno o modelu 拧tampa膷a i sistemu 拧tampe, bi膰e instalirano do %d "
+"MB dodatnog softvera."
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"Brzina bi trebala imati zavr拧etak k, M ili G (na primjer, \"11M\" za 11M) "
-"ili dodajte odgovaraju膰i broj nula (0)."
+"Nemate nijedan pode拧en interfejs.\n"
+"Podesite ih prvo klikaju膰i na 'Podesi'"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Frekvencija bi trebala imati zavr拧etak k, M ili G (na primjer, \"2.46G\" za "
-"frekvenciju 2.46 GHz) ili dodajte odgovaraju膰i broj nula (0)."
+msgid "Estonian"
+msgstr "Estonska"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache je World Wide Web server. Koristi se za poslu啪ivanje HTML\n"
+"datoteka i CGI skripti."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Start at boot"
-msgstr "Pokreni na bootu"
+msgid "Add/Del Clients"
+msgstr "Dodaj/obri拧i klijente"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Odredi ime ra膷unara iz DHCP adrese"
+msgid "Choose the network interface"
+msgstr "Izaberite mre啪ni interface"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Network Hotplugging"
+msgid "Unknown Model"
+msgstr "Nepoznat model"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Otkrij id mre啪ne karte (korisno za laptope)"
+msgid "CD/DVD burners"
+msgstr "CD/DVD pr啪ilica"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP host name"
-msgstr "DHCP ime ra膷unara"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Particija koja se boota po defaultu\n"
+" (za MS-DOS boot, ne za lilo)\n"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+msgid "choose image"
+msgstr "izaberite image"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP adresa"
+msgid "Firewalling configuration detected!"
+msgstr "Otkrivena konfiguracija firewalla!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "Connection name"
+msgstr "Naziv konekcije"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatska IP"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"x koordinata tekst polja\n"
+"u broju znakova"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (drajver %s)"
+msgid "Updating package selection"
+msgstr "Osvje啪avam izbor paketa"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode拧avam mre啪ni ure膽aj %s"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Gdje 啪elite montirati loopback datoteku %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Molimo unesite IP konfiguraciju za ovaj ra膷unar.\n"
-"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj ta膷kama (npr. 1.2.3.4)."
+"Disketa je uspje拧no napravljena.\n"
+"Sada mo啪ete ponoviti va拧u instalaciju."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj ure膽aj je prethodno pode拧en za konekciju na Internet.\n"
-"Samo prihvatite kako bi ovaj ure膽aj ostao pode拧en.\n"
-"Izmjena polja ispod 膰e prepisati ovu konfiguraciju."
+msgid "the number of buttons the mouse has"
+msgstr "broj dugmadi koje ima mi拧"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Upozorenje! Prona膽ena je postoje膰a konfiguracija firewalla. Mo啪da 膰e biti "
-"potrebno neko ru膷no pode拧avanje nakon instalacije."
-
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
+"Molimo unesite direktorij (ili modul) za\n"
+" smje拧taj backupa na ovom ra膷unaru."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Password"
-msgstr "艩ifra naloga"
+msgid "Replay"
+msgstr "Ponovi"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Login naloga (korisni膷ko ime)"
+msgid "Backup other files"
+msgstr "Backup ostalih datoteka"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
+msgid "No floppy drive available"
+msgstr "Nema pogodne disketne jedinice"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection speed"
-msgstr "Brzina konekcije"
+msgid "Backup files are corrupted"
+msgstr "Backup datoteke su o拧te膰ene"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Dialing mode"
-msgstr "Na膷in biranja broja"
+msgid "TV norm:"
+msgstr "TV standard :"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose your country"
-msgstr "Izaberite va拧u dr啪avu"
+msgid "Cpuid family"
+msgstr "Cpuid familija"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcionalno)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcionalno)"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litvanska AZERTY (nova)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "da zna膷i da aritmeti膷ki koprocesor ima priklju膷en exception vector"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Izabrali ste softversku RAID particiju kao root (/).\n"
+"Nijedan bootloader nije u mogu膰nosti da rukuje sa ovim bez /boot particije.\n"
+"Molim kasnije dodajte /boot particiju"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Va拧 li膷ni broj telefona"
+msgid "Previous"
+msgstr "Prethodni"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
+msgid "Other OS (MacOS...)"
+msgstr "Ostali OSi (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
+msgid "To activate the mouse,"
+msgstr "Da biste aktivirali mi拧a,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO kartice"
+msgid "Bringing up the network"
+msgstr "Pokre膰em mre啪u"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Snimanje ekrana 膰e biti dostupno nakon 拧to instalirate u %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ kartice"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Na va拧em hard disku ustanovljeno je vi拧e od jedne Microsoft particije.\n"
+"Molim izaberite onu koju 啪elite smanjiti kako biste instalirali va拧 "
+"Mandrake\n"
+"Linux operativni sistem.\n"
+"\n"
+"Svaka particija je navedena ovako: \"Linux ime\", \"Windows ime\",\n"
+"\"Kapacitet\".\n"
+"\n"
+"\"Linux ime\" se sastoji od: \"vrste hard diska\", \"broja hard diska\",\n"
+"\"broja particije\" (na primjer, \"hda1\").\n"
+"\n"
+"\"Vrsta hard diska\" je \"hd\" ako je va拧 hard disk IDE, a \"sd\" ako je\n"
+"u pitanju SCSI hard disk.\n"
+"\n"
+"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
+"diskova:\n"
+"\n"
+" * \"a\" zna膷i \"master hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"b\" zna膷i \"slave hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"c\" zna膷i \"master hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+" * \"d\" zna膷i \"slave hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+"Kod SCSI hard diskova, \"a\" je \"disk sa najni啪im SCSI IDom\", \"b\"\n"
+"je \"drugi najni啪i SCSI ID\", itd.\n"
+"\n"
+"\"Windows ime\" je slovo kojim je va拧 hard disk ozna膷en pod Windowsom\n"
+"(prva particija prvog diska se zove \"C:\")."
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Molimo ispunite ili provjerite polje ispod"
+msgid "Tanzania"
+msgstr "Tanzanija"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Pode拧avanje konekcije"
+msgid "Computing FAT filesystem bounds"
+msgstr "Izra膷unavam granice FAT filesistema"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"\n"
+"Backup Sources: \n"
msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promijeniti postavke va拧e konekcije."
+"\n"
+"Izvori backup-a: \n"
-#: ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada 膰e biti odspojen."
+msgid "Content of the file"
+msgstr "Sadr啪aj datoteke"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sistem je sada spojen na Internet."
+msgid "Authentication LDAP"
+msgstr "Autentikacijski LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Probavam va拧u konekciju..."
+msgid "Let me pick any driver"
+msgstr "Dozvoli da odaberem bilo koji drajver"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se 啪elite poku拧ati spojiti na Internet sada?"
+msgid "Profile "
+msgstr "Profil"
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet konfiguracija"
+msgid "transmitted"
+msgstr "poslano"
-#: ../../partition_table/raw.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Ne拧to lo拧e se de拧ava na va拧em disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To zna膷i 膰e da pisanje bilo 膷ega na disk rezultirati sme膰em."
+msgid "Palestine"
+msgstr "Palestina"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Default)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/cups.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS serveru \"%s\""
+msgid "%d comma separated strings"
+msgstr "%d stringova razdvojenih zarezom"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Udaljeni 拧tampa膷i"
+msgid "Here is the full list of keyboards available"
+msgstr "Ovdje je puna lista svih dostupnih tastatura"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Theme name"
+msgstr "Naziv teme"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "(on this machine)"
-msgstr "(na ovom ra膷unaru)"
+msgid "/_Help"
+msgstr "/_Pomo膰"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Ovdje mo啪ete izabrati da li skeneri spojeni na ovaj ra膷unar trebaju biti "
+"dostupni udaljenim ra膷unarima i kojim ra膷unarima."
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "the width of the progress bar"
+msgstr "拧irina progresne trake"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Cook Islands"
+msgstr "Cook ostrva"
-#: ../../printer/data.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Formatting partition %s"
+msgstr "Formatiram particiju %s"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Hostname required"
+msgstr "Potrebno ime ra膷unara"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Unselect fonts installed"
+msgstr "Isklju膷i instalirane fontove"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Cancel"
+msgstr "Odustani"
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Searching for configured scanners ..."
+msgstr "Tra啪im pode拧ene skenere ..."
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Nepoznat model"
+msgid "Wheel"
+msgstr "To膷ki膰"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Nepoznat model"
+msgid "Videocard"
+msgstr "Video kartica"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tBackupi koriste tar i bzip2\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Host %s"
-msgstr "Ra膷unar %s"
+msgid "Remove Selected"
+msgstr "Ukloni izabrano"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network %s"
-msgstr "Mre啪a %s"
+msgid "/Autodetect _modems"
+msgstr "/Automatski prepoznaj _modeme"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfejs \"%s\""
+msgid "Remove printer"
+msgstr "Ukloni 拧tampa膷"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lokalna mre啪a (mre啪e)"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"UPOZORENJE!\n"
+"\n"
+"DrakX 膰e sada promijeniti veli膷inu va拧e Windows particije. Budite pa啪ljivi, "
+"ova\n"
+"operacija je opasna. Ako to ve膰 niste uradili, najprije napustite "
+"instalaciju,\n"
+"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
+"ponovo pokrenite instalaciju. Tako膽er biste trebali spasiti sve podatke.\n"
+"Kada ste sigurni, kliknite na Ok."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Sirovo 拧tampanje (Bez drajvera)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Kojim servisima 啪elite dozvoliti pristup sa Interneta?"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ", koriste膰i komandu %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Dobro do拧li u aplikaciju za pode拧avanje maila.\n"
+"\n"
+"Ovdje mo啪ete podesiti sistem obavje拧tavanja.\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveru \"%s\", 拧tampa膷 \"%s\""
+msgid "Other"
+msgstr "Ostalo"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "na SMB/Windows serveru \"%s\", share \"%s\""
+msgid "Default"
+msgstr "Default"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
+msgid "Button 2 Emulation"
+msgstr "Emulacija 2 dugmeta"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", 拧tampa膷 \"%s\""
+msgid "type1inst building"
+msgstr "type1inst kreiranje"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", printing to %s"
-msgstr ", 拧tampa u %s"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ", multi-function device"
-msgstr ", vi拧enamjenski ure膽aj"
+msgid "choose image file"
+msgstr "izaberite image datoteku"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", vi拧enamjenski ure膽aj na HP JetDirect"
+msgid "X server"
+msgstr "X server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", vi拧enamjenski ure膽aj na USBu"
+msgid "Domain Admin User Name"
+msgstr "Korisni膷ko ime domenskog administratora"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", vi拧enamjenski ure膽aj na paralelnom portu \\#%s"
+msgid "There was an error while scanning for TV channels"
+msgstr "Do拧lo je do gre拧ke kod pretrage TV kanala"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB 拧tampa膷"
+msgid "US keyboard (international)"
+msgstr "US tastatura (me膽unarodna)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB 拧tampa膷 \\#%s"
+msgid "Not installed"
+msgstr "Nije instaliran"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " na paralelnom portu \\#%s"
+msgid "LAN connection"
+msgstr "LAN konekcija"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Local Printers"
-msgstr "Lokalni 拧tampa膷i"
+msgid "/File/-"
+msgstr "/Datoteka/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
+msgid "Italian"
+msgstr "Italijanska"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Unesite URI ure膽aja 拧tampa膷a"
+msgid "Basic"
+msgstr "Osnovno"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "艩tampa膷 na NetWare serveru"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "艩tampa膷 na SMB/Windows 95/98/NT serveru"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Mre啪ni 拧tampa膷 (TCP/Socket)"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "艩tampa膷 na udaljenom lpd serveru"
+msgid "Card IO"
+msgstr "IO kartice"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "艩tampa膷 na udaljenom CUPS serveru"
+msgid "when checked, owner and group won't be changed"
+msgstr "kada je uklju膷eno, vlasnik i grupa se ne mogu promijeniti"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Udaljeni 拧tampa膷"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Ova posebna Bootstrap\n"
+"particija je za\n"
+"dvojni boot va拧eg sistema.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Local printer"
-msgstr "Lokalni 拧tampa膷"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Molimo izaberite za svaki korak da li 膰ete ga ponoviti kao i u va拧oj "
+"instalaciji ili 膰e se obaviti ru膷no"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Pode拧avam aplikacije..."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Ovdje tako膽e trebate odlu膷iti da li ovaj ra膷unar treba koristiti skenere na "
+"udaljenim ra膷unarima."
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Mre啪u preko FTPa.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Uklanjam 拧tampa膷 \"%s\" ..."
+msgid "Russian (Yawerty)"
+msgstr "Ruska (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li 啪elite da uklonite 拧tampa膷 \"%s\"?"
+msgid "You must enter a device or file name!"
+msgstr "Morate unijeti naziv ure膽aja ili datoteke!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove printer"
-msgstr "Ukloni 拧tampa膷"
+msgid "/_Quit"
+msgstr "/_Izlaz"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Saznaj kako koristiti ovaj 拧tampa膷"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Potreban vam je Alcatel-ov mikrokod.\n"
+"Mo啪ete ga downloadovati na\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"zatim kopirajte mgmt.o u /usr/share/speedtouch"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "艩tampaj testnu stranicu"
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafi膷ka memorija: %s kB\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Nisam uspio ukloniti 拧tampa膷 \"%s\" iz Star/Open Offica."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to compilation tools"
+msgstr "pristup alatima za kompajliranje"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select data to restore..."
+msgstr "Molim izaberite podatke za vra膰anje..."
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "艩tampa膷 \"%s\" je uspje拧no uklonjen iz Star/Open Offica."
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Ako planirate koristiti aboot, budite pa啪ljivi i ostavite slobodnog prostora "
+"(2048 sektora je dovoljno)\n"
+"na po膷etku diska"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Uklanjam 拧tampa膷 iz Star/Open Offica"
+msgid "Standard test page"
+msgstr "Standardna testna strana"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ukloni ovaj 拧tampa膷 iz Star/Open Offica"
+msgid "Create"
+msgstr "Kreiraj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Nisam uspio dodati 拧tampa膷 \"%s\" u Star Office/OpenOffice.org/GIMP."
+msgid "What"
+msgstr "艩ta"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "Do拧lo je do gre拧ke pri naru膷ivanju paketa:"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (BDS)"
+msgstr "Bugarska (BDS)"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Disable Server"
+msgstr "Onemogu膰i server"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem encryption key"
+msgstr "Klju膷 za kodiranje datote膷nog sistema"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gujarati"
+msgstr "Gujarati"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "艩tampa膷 \"%s\" je uspje拧no dodan u Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Molimo unesite prvi broj od deset koji 啪elite izmjeniti,\n"
+"ili samo pritisnite Enter za nastavak.\n"
+"Va拧 izbor?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Dodajem 拧tampa膷 u Star Office/OpenOffice.org/GIMP"
+msgid "Save theme"
+msgstr "Snimi temu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Dodaj ovaj 拧tampa膷 u Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "grupa"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "艩tampa膷 \"%s\" je sada pode拧en kao podrazumjevani 拧tampa膷."
+msgid "Brazil"
+msgstr "Brazil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Default printer"
-msgstr "Podrazumjevani 拧tampa膷"
+msgid "Auto Install"
+msgstr "Auto instalacija"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Podesi 拧tampa膷 kao podrazumjevani"
+msgid "Network Configuration Wizard"
+msgstr "膶arobnjak za pode拧avanje mre啪e"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Opcije 拧tampa膷a"
+msgid "Removable media automounting"
+msgstr "Automatsko montiranje izmjenjivog medija"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Proizvo膽a膷 拧tampa膷a, model"
+msgid "Printing"
+msgstr "艩tampa"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvo膽a膷 拧tampa膷a, model, drajver"
+msgid "Unkown driver"
+msgstr "Nepoznat drajver"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Uklanjam stari 拧tampa膷 \"%s\" ..."
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Nema 拧tampa膷a koji su direktno povezani na ovaj ra膷unar"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Naziv 拧tampa膷a, opis, lokacija"
+msgid "Create a new partition"
+msgstr "Napravi novu particiju"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tip konekcije 拧tampa膷a"
+msgid "Driver:"
+msgstr "Drajver:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Raw printer"
-msgstr "Sirovi 拧tampa膷"
+msgid "unknown"
+msgstr "nepoznat"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Uradi!"
+msgid "Use fdisk"
+msgstr "Koristi fdisk"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Close"
-msgstr "Zatvori"
+msgid "MOVE YOUR WHEEL!"
+msgstr "POMJERITE VA艩 TO膶KI膯!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "sent: "
+msgstr "poslano:"
+
+#: ../../network/network.pm:1
#, c-format
+msgid "Automatic IP"
+msgstr "Automatska IP"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"艩tampa膷 %s\n"
-"艩ta 啪elite da izmjenite na ovom 拧tampa膷u?"
+"To je to. Instalacija je sada zavr拧ena i va拧 GNU/Linux sistem je spreman\n"
+"za upotrebu. Samo kliknite na \"Dalje ->\" da restartujete sistem. Prva "
+"stvar\n"
+"koju 膰ete ugledati nakon 拧to ra膷unar zavr拧i hardverske provjere je meni\n"
+"bootloadera, koji vam nudi izbor operativnog sistema koji 啪elite pokrenuti.\n"
+"\n"
+"Dugme \"Napredno\" 膰e vam ponuditi jo拧 dva dugmeta za:\n"
+"\n"
+" * \"generisanje autoinstalacijske diskete\": da biste napravili "
+"instalacionu\n"
+"disketu koja 膰e automatski izvr拧iti cijelu instalaciju bez intervencije "
+"operatora,\n"
+"sli膷nu instalaciji koju ste upravo konfigurisali.\n"
+"\n"
+" Obratite pa啪nju na dvije razli膷ite opcije koje su dostupne nakon "
+"klikanja\n"
+"na ovo dugme:\n"
+"\n"
+" * \"Ponovi\". Ovo je djelomi膷no automatizirana instalacija. Korak\n"
+"particioniranja je jedini interaktivni dio.\n"
+"\n"
+" * \"Automatizirano\". Potpuno automatska instalacija: hard disk je\n"
+"potpuno prepisan, svi podaci su izgubljeni.\n"
+"\n"
+" Ova mogu膰nost je vrlo prikladna kada instalirate nekoliko sli膷nih\n"
+"ra膷unara. Pogledajte odjeljak Automatska instalacija na na拧oj web stranici\n"
+"za vi拧e informacija.\n"
+"\n"
+" * \"Snimi izbor paketa\" (*): snima listu paketa koje ste izabrali u ovoj\n"
+"instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom, "
+"ubacite\n"
+"disketu i zapo膷nite instalaciju. Na upitu, pritisnite tipku [F1] i ukucajte\n"
+">>linux defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) Potrebna vam je FAT-formatirana disketa (da biste je napravili pod\n"
+"GNU/Linuxom, kucajte \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju 拧tampa膷a"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Dodaj novi 拧tampa膷"
+msgid "Configuration of a remote printer"
+msgstr "Pode拧avanje udaljenog 拧tampa膷a"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normalni mod"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Change the printing system"
-msgstr "Promijenite sistem 拧tampe"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Molim uklju膷ite ako 啪elite obrisati traku prije backupa."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Pode拧avanje CUPSa"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Online platforma koja odgovara potrebama va拧eg preduze膰a za podr拧kom."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osvje啪i listu 拧tampa膷a (kako bi bili prikazani svi dostupni CUPS 拧tampa膷i)"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL treba po膷injati sa 'ftp:' ili 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Prika啪i sve dostupne CUPS 拧tampa膷e"
+msgid "Add a new rule at the end"
+msgstr "Dodaj novo pravilo na kraj"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Sljedeli 拧tampa膷i su pode拧eni. Kliknite dva puta na neki od njih za izmjenu "
-"postavki; ako ga 啪elite u膷initi podrazumjevanim 拧tampa膷em; ili da biste "
-"vidjeli informacije o njemu."
+"Tako膽e mo啪ete odlu膷iti da li 拧tampa膷i na udaljenim ra膷unarima trebaju biti "
+"automatski dostupni sa ovog ra膷unara."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Sistem 拧tampe: "
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Sada mo啪ete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
+"ime2=vrijednost2 ...''.\n"
+"Na primjer, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
+msgid "Quit without writing the partition table?"
+msgstr "Izlazite bez pisanja tabele particija?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaliram Foomatic..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Nisam uspio podesiti 拧tampa膷 \"%s\"!"
+msgid "Installing packages..."
+msgstr "Instaliram pakete..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Pode拧avam 拧tampa膷 \"%s\"..."
+msgid "Dutch"
+msgstr "Holandska"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading printer data..."
-msgstr "膶itam podatke o 拧tampa膷u..."
+msgid "The following packages need to be installed:\n"
+msgstr "Sljede膰i paketi trebaju biti instalirani:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem 拧tampanja (spooler) 啪elite koristiti?"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler 拧tampa膷a"
+msgid "service setting"
+msgstr "postavke servisa"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Postavljam podrazumjevani 拧tampa膷..."
+msgid "Custom"
+msgstr "Ru膷no izaberi"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Instaliram %s..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Datoteku ve膰 koristi drugi loopback, izaberite neku drugu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Uklanjam %s..."
+msgid "Read-only"
+msgstr "Samo za 膷itanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za 拧tampu (%s) se ne膰e pokrenuti automatski prilikom boota ra膷unara.\n"
-"\n"
-"Mogu膰e je da je automatsko pokretanje isklju膷eno prilikom promjene na vi拧i "
-"nivo sigurnosni, po拧to je sistem za 拧tampu mogu膰a ta膷ka napada.\n"
-"\n"
-"Da li 啪elite da ponovo uklju膷ite automatsko pokretanje sistema za 拧tampu?"
+msgid "Latvia"
+msgstr "Latvija"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Pokre膰em sistem za 拧tampu tokom boota"
+msgid "No known driver"
+msgstr "Nema nijedan poznat drajver"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Ako to nije onaj koji 啪elite podesiti, uneiste naziv ure膽aja / naziv "
+"datoteke u ulaznu liniju"
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Sada 膰ete instalirati sistem za 拧tampu %s na sistemu koji je na sigurnosnom "
-"nivou % s.\n"
+"Nije prona膽ena nijedna zvu膷na kartica na va拧oj ma拧ini. Molim provjerite da "
+"li je ispravno spojena zvu膷na kartica koja je podr啪ana pod Linuxom.\n"
"\n"
-"Ovaj sistem za 拧tampu pokre膰e demon (pozadinski proces) koji 膷eka zadatke "
-"拧tampe i rje拧ava ih. Ovom demonu tako膽e mogu pristupiti drugi ra膷unari putem "
-"mre啪e, tako da je to mogu膰a ta膷ka napada. Stoga se tek rijetki od odabranih "
-"demona pokre膰u na ovom sigurnosnom nivou.\n"
"\n"
-"Da li zaista 啪elite podesiti 拧tampanje na ovom ra膷unaru?"
+"Mo啪ete posjetiti na拧u bazu hardvera na:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za 拧tampu na sigurnosnom nivou: %s"
+msgid "Configure Local Area Network..."
+msgstr "Podesi Lokalnu mre啪u..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoi膷an"
+msgid "Launch the sound system on your machine"
+msgstr "Pokre膰e zvu膷ni sistem na va拧em ra膷unaru"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "visok"
+msgid "Preparing printer database..."
+msgstr "Pripremam bazu podataka o 拧tampa膷ima..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Restartujem sistem za 拧tampu ..."
+msgid "Information"
+msgstr "Informacije"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Pode拧avanje udaljenog 拧tampa膷a"
+msgid "No network card"
+msgstr "Nema mre啪ne kartice"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Mre啪ni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
-"va拧u konfiguraciju i va拧 hardware. Onda ponovo poku拧ajte podesiti udaljeni "
-"拧tampa膷."
+msgid "Which filesystem do you want?"
+msgstr "Koji datote膷ni sistem 啪elite?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Pode拧avanje mre啪e koje je napravljeno tokom instalacije sada ne mo啪e biti "
-"pokrenuto. Molim provjerite da li 膰e mre啪a postati dostupna nakon bootanja "
-"sistema i popravite pode拧enja koriste膰i Mandrake Kontrolni centar, sekcija "
-"\"Mre啪a i Internet\"/\"Konekcija\", a zatim podesite 拧tampa膷, ponovo "
-"koriste膰i Mandrake Kontrolni centar, sekcija \"Hardver\"/\"艩tampa膷\""
+msgid "3 buttons"
+msgstr "3 dugmeta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Sada podesite mre啪u"
+msgid "Detailed information"
+msgstr "Detaljne informacije"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez pode拧avanja mre啪e"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Sada 膰ete podesiti udaljeni 拧tampa膷. Ovo zahtjeva aktivan pristup mre啪i, ali "
-"va拧a mre啪a jo拧 uvijek nije pode拧ena. Ako 啪elite nastaviti bez pode拧avanja "
-"mre啪e, ne膰ete mo膰i koristiti 拧tampa膷 koji sada pode拧avate. Kako 啪elite da "
-"nastavimo?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Mre啪na funkcionalnost nije pode拧ena"
+"Podrazumjevane opcije 拧tampa膷a\n"
+"\n"
+"Trebate provjeriti da su veli膷ina papira i tip tinte (ako je dostupno) "
+"ispravno pode拧eni. Obratite pa啪nju da za voma veliku kvalitetu / rezoluciju "
+"拧tampa mo啪e postati znatno sporija."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Pokre膰em mre啪u..."
+msgid "This floppy is not FAT formatted"
+msgstr "Ova disketa nije FAT formatirana"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Osvje啪avam podatke o 拧tampa膷u..."
+msgid "Configuring network"
+msgstr "Pode拧avam mre啪u"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste va拧 biv拧i podrazumjevani 拧tampa膷 (\"%s\"),Da li 膰e to tako膽er "
-"biti podrazumjevani 拧tampa膷 podnovim sistemom 拧tampe %s?"
+msgid "Graphic Card"
+msgstr "Grafi膷ka karta"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Premje拧tanje konfiguracije 拧tamap膷a"
+msgid "Resizing Windows partition"
+msgstr "Smanjujem Windows particiju"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Prebacujem %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "Provider dns 1 (opcionalno)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Novo ime 拧tampa膷a"
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"艩tampa膷 \"%s\" ve膰 postoji,\n"
-"da li sigurno 啪elite prepisati ovu konfiguraciju?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv 拧tampa膷a bi se trebao sastojati od slova, brojeva i donje linije"
+"Sada mo啪ete particionirati %s.\n"
+"Kada zavr拧ite, ne zaboravite spasiti sa `w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Prebaci"
+msgid "Close"
+msgstr "Zatvori"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"艩tampa膷 pod imenom \"%s\" ve膰 postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepi拧ete.\n"
-"Mo啪ete tako膽er unijeti novo ime ili presko膷iti ovaj 拧tampa膷."
+"\"Dr啪ava\": provjerite trenutni izbor dr啪ave. Ako se ne nalazite ovdje,\n"
+"kliknite na dugme \"Podesi\" i izaberite neku drugu dr啪avu. Ako se va拧a\n"
+"zemlja ne nalazi na listi, kliknite na dugme \"Vi拧e\" kako biste dobili "
+"listu\n"
+"svih dr啪ava."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati 拧tampa膷e"
+msgid "Calendar"
+msgstr "Kalendar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Ozna膷ite 拧tampa膷e koje 膰ete prebacivati i kliknite na \n"
-"\"Prebaci\"."
+"Vrati izabrane\n"
+"stavke katologa"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Tako膽er 拧tampa膷i konfigurisani sa PPD datotekama koje su osigurali njihovi "
-"proizvo膽a膷i ili sa vlastitim CUPS drajverima ne mogu biti preba膷eni."
+"Da biste koristili udaljeni lpd 拧tampa膷, morate dati ime ra膷unara za printer "
+"server i ime 拧tampa膷a na tom serveru."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
-"configure\" ne mogu biti premje拧teni."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podr啪avaju IPP 拧tampa膷e.\n"
+msgid "consolehelper missing"
+msgstr "nedostaje consolehelper"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podr啪ava samo lokalne 拧tampa膷e, udaljene LPD 拧tampa膷ei Socket/TCP "
-"拧tampa膷e.\n"
+msgid "stopped"
+msgstr "zaustavljen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podr啪ava 拧tampa膷e na Novell serverima ili 拧tampa膷ekoji 拧alju podatke "
-"u komandama slobodnog oblika.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Da li FPU ima IRQ vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mo啪ete kopirati konfiguraciju 拧tampa膷a koju ste napravili za spooler %s u % "
-"s, va拧 trenutni spooler. Svi podaci o konfiguraciji (naziv 拧tampa膷a, opis, "
-"lokacija, tip konekcije kao i podrazumjevane opcije) 膰e biti preuzeti, ali "
-"zadaci 拧tampe ne膰e biti preba膷eni.\n"
-"Svi redovi ne mogu biti preba膷eni zbog sljede膰ih razloga:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Va拧 拧tampa膷 je pode拧en automatski kako bi vam dao pristup memoriji foto "
-"kartice sa PCa. Sada mo啪ete pristupiti va拧im foto karticama koriste膰i "
-"grafi膷ki program \"MToolsFM\" (Meni: \"Aplikacije\" -> \"Datote膷ni alati\" -"
-"> \"MTools File Manager\") ili alat komandne linije \"mtools\" (kucajte "
-"\"man mtools\" na komandnoj liniji za vi拧e informacija). Datote膷ni sistem "
-"va拧e kartice 膰ete na膰i pod slovom \"p:\", ili pod narednim slovima ako imate "
-"vi拧e od jednog HP 拧tampa膷a sa jedinicom za foto kartice. U \"MToolsFM\" "
-"promijeniti slovo drajva koriste膰i polje u gornjem desnom uglu liste "
-"datoteka."
+msgid "Expand Tree"
+msgstr "Pro拧iri stablo"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Va拧 vi拧enamjenski ure膽aj je automatski konfigurisan kako bi mogao skenirati. "
-"Sada mo啪ete skenirati sa komandne linije pomo膰u komande \"scanimage"
-"\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate vi拧e od "
-"jednog) ili koriste膰i grafi膷ke okoline \"xscanimage\" ili \"xsane\". Ako "
-"koristite GIMP, mo啪ete tako膽er skenirati koriste膰i odgovaraju膰u stavku u "
-"meniju \"File\"/\"Acquire\". Za vi拧e informacija, pogledajte jo拧 i \"man "
-"scanimage\" na komandnoj liniji (\"#scanimage\" u Konqueroru).\n"
+"Stari \"%s\" drajver je na crnoj listi.\n"
"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj ure膽aj!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "艩tampam testnu stranicu..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Lista opcija za 拧tampu"
+"Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n"
+"\n"
+"Stoga 膰e novi drajver \"%s\" biti kori拧ten tek nakon idu膰eg pokretanja "
+"sistema."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "艩tampam na 拧tampa膷 \"%s\""
+msgid "Expert Mode"
+msgstr "Ekspertni mod"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "艩tampam/pristupam foto kartici na \"%s\""
+msgid "Printer options"
+msgstr "Opcije 拧tampa膷a"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "艩tampam/skeniram na \"%s\""
+msgid "Local Network adress"
+msgstr "Lokalna mre啪na adresa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "艩tampam/skeniram/foto kartica na \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Backup sistemskih datoteka. (/etc direktorij)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Za listu opcija koje su dostupne za trenutni 拧tampa膷 ili pro膷itajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za 拧tampu\".%s%s%s\n"
+"Sada imate mogu膰nost da dobavite sa Interneta nove verzije paketa koji\n"
+"su iza拧li nakon 拧to je distribucija objavljena. Me膽u njima su sigurnosne "
+"zakrpe\n"
+"i ispravke bugova.\n"
+"\n"
+"Da biste izvr拧ili download, potrebno je da podesite Internet konekciju.\n"
"\n"
+"Da li 啪elite instalirati update-ovane pakete ?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Samba server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"Komande \"%s\" i \"%s\" tako膽er omogu膰avaju izmjenu opcija za pojedina膷ni "
-"zadatak 拧tampe. Jednostavno dodajte 啪eljena pode拧enja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
+"Enable/Disable IP spoofing protection."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mo啪ete tako膽er koristiti grafi膷ki interfejs \"xpdq\" za pode拧avanje opcija i "
-"upravljanje zadacima 拧tampe.\n"
-"Ako koristite KDE okru啪enje radne povr拧ine imate \"dugme za paniku\". To je "
-"ikona na radnoj povr拧ini 膷iji je naziv \"ZAUSTAVI 拧tampa膷!\", koja "
-"zaustavlja sve zadatke 拧tampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slu膷aju zaglavljivanja papira.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australijska Optus kablovska TV"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Ovu komandu tako膽er mo啪ete koristiti u polju \"Komanda za 拧tampu\" u "
-"dijalozima za 拧tampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbje膽uje sama aplikacija.\n"
+" <Tab>/<Alt-Tab> izme膽u elemenata | <Space> vr拧i izbor | <F12> idu膰i ekran "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za 拧tampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
+msgid "Subnet:"
+msgstr "Subnet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni 拧tampa膷 kliknite na dugme "
-"\"Lista opcija za 拧tampu\"."
+msgid "Zimbabwe"
+msgstr "Zimbabve"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" tako膽er omogu膰ava izmjenu opcija za pojedina膷ni zadatak "
-"拧tampe. Jednostavno dodajte 啪eljena pode拧enja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
+msgid "Please enter the host name or IP."
+msgstr "Molimo unesite ime ra膷unara ili IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za 拧tampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
+msgid "When"
+msgstr "Kada"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Drugi DNS server (opcionalno)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finska"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Ovo je lista mogu膰ih opcija za 拧tampu za trenutni 拧tampa膷:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande mo啪ete tako膽er koristiti u polju \"Komanda za 拧tampu\" u "
-"dijalozima za 拧tampu mnogih aplikacija, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbje膽uje sama aplikacija.\n"
+msgid "Color depth: %s\n"
+msgstr "Broj boja: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za 拧tampanje datoteke sa komandne linije (terminalski prozor) mo啪ete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafi膷ki alat za 拧tampu: \"xpp "
-"<datoteka>\" ili \"kprinter <datoteka>\". Grafi膷ki alati vam omogu膰uju da "
-"jednostavno odaberete 拧tampa膷 i izmjenite pode拧enja opcija.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Ne mo啪ete isklju膷iti ovaj paket. On mora biti unaprije膽en"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
+msgid "Loading from floppy"
+msgstr "U膷itavam sa diskete"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Testna stranica je poslana 拧tampa膷u.\n"
-"Mo啪e potrajati odre膽eno vrijeme dok 拧tampa膷 krene.\n"
+"Drakperm se koristi da pregledate datoteke koje 啪elite koristiti za primjenu "
+"privilegija, vlasnika i grupa putem msec-a.\n"
+"Mo啪ete tako膽er izmijeniti va拧a vlastita pravila koja 膰e prepisati "
+"podrazumijevana pravila."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana 拧tampa膷u.\n"
-"Mo啪e potrajati odre膽eno vrijeme dok 拧tampa膷 krene.\n"
-"Status 拧tampanja:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Nemoj 拧tampati testnu stranicu"
+msgid "Slovenia"
+msgstr "Slovenija"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Foto testna strana"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Unesite korisnika\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- PCI i USB ure膽aji: ovo 膰e izlistati PCI/USB id-ove za; vendor, device, "
+"subvendor i subdevice"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
+msgid "ProgressBar color selection"
+msgstr "Izbor boje trake napretka"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standardna testna strana"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Ovo su trenutne opcije u va拧em boot meniju.\n"
+"Mo啪ete dodati nove ili promijeniti postoje膰e."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "艩tampaj"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Nijedna testna strana"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Molimo izaberite testne stranice koje 膰ete 拧tampati.\n"
-"Pa啪nja: foto testna stranica mo啪e tra啪iti dosta vremena za 拧tampu a na "
-"laserskim 拧tampa膷ima sa malo memorije mo啪da ne膰e nikad ni iza膰i. U ve膰ini "
-"slu膷ajeva dovoljno je od拧tampati standardnu testnu stranicu."
+"Izvr拧ava naredbe zakazane putem at komande u zadato vrijeme,\n"
+"te pokre膰e programe u pozadini kada je ra膷unar neoptere膰en."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testna stranica"
+msgid "Radio support:"
+msgstr "Podr拧ka za radio:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li 啪elite da podesite ovaj 拧tampa膷 (\"%s\")\n"
-"kao podrazumjevani 拧tampa膷?"
+msgid "Installing SANE packages..."
+msgstr "Instaliram SANE pakete..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
+msgid "boot disk creation"
+msgstr "Kreiranje boot diskete"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Podrazumjevane postavke 拧tampa膷a"
+msgid "Change type"
+msgstr "Promijeni tip"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO instalacija"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Koristi CD/DVDROM za backup"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Podrazumjevane opcije 拧tampa膷a\n"
+"膶estitamo, instalacija je zavr拧ena.\n"
+"Uklonite boot medij i pritisnite return za reboot.\n"
"\n"
-"Trebate provjeriti da su veli膷ina papira i tip tinte (ako je dostupno) "
-"ispravno pode拧eni. Obratite pa啪nju da za voma veliku kvalitetu / rezoluciju "
-"拧tampa mo啪e postati znatno sporija."
+"\n"
+"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
+"Linuxa,\n"
+"pogledajte Errata koja je dostupna na:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Informacije o pode拧avanju va拧eg sistema su dostupne u poglavlju\n"
+"\"nakon instalacije\" va拧eg Zvani膷nog Mandrake Linux priru膷nika za upotrebu."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Upload firmware-a za HP LaserJet 1000"
+msgid "paranoid"
+msgstr "paranoi膷an"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Po拧alji mail izvje拧taj nakon svakog backupa na :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Da biste mogli 拧tampati sa va拧im Lexmark inkjetom na ovoj konfiguraciji, "
-"potrebni su vam inkjet drajveri za 拧tampu koje obezbje膽uje Lexmark (http://"
-"www.lexmark.com/). Kliknite na link \"Drivers\". Zatim izaberite va拧 model a "
-"zatim \"Linux\" kao operativni sistem. Drajveri dolaze u vidu RPM paketa ili "
-"shell skripte sa interaktivnom grafi膷kom instalacijom. Ne morate obaviti ovu "
-"konfiguraciju na grafi膷kom interfejsu. Odustanite odmah nakon licencnog "
-"ugovora. Zatim od拧tampajte stranice za poravnavanje glava sa "
-"\"lexmarkmaintain\" i podesite opcije poravnanja glave pomo膰u ovog programa."
+"Ovu komandu tako膽er mo啪ete koristiti u polju \"Komanda za 拧tampu\" u "
+"dijalozima za 拧tampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
+"datoteke jer tudatoteku obezbje膽uje sama aplikacija.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Pode拧avanje Lexmark inkjet-a"
+msgid "Resolution"
+msgstr "Rezolucija"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Inkjet drajveri za 拧tampu koje obezbje膽uje Lexmark podr啪avaju samo lokalne "
-"拧tampa膷e, a ne i 拧tampa膷e na udaljenim ra膷unarima ili print serverima. "
-"Molimo spojite va拧 拧tampa膷 na lokalni port ili ga podesite na ra膷unaru na "
-"koji je spojen."
+"Da biste 拧tampali na SMB 拧tampa膷, morate dati ime SMB ra膷unara (Pa啪nja! Ono "
+"mo啪e biti razli膷ito od TCP/IP imena!) i eventualno IP adresu print servera, "
+"kao i share naziv 拧tampa膷a kojem 啪elite pristupiti i korisni膷ko ime, 拧ifru i "
+"informacije o radnoj grupi."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Sada pode拧avate OK laserski winprinter. Ovi 拧tampa膷i\n"
-"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
-"spojeni na prvom paralelnom portu. Ako je va拧 拧tampa膷 spojen na neki drugi "
-"port ili na print server molimo spojite 拧tampa膷 na prvi paralelni port prije "
-"nego 拧to od拧tampate testnu stranicu. Ina膷e 拧tampa膷 ne膰e raditi. Drajver 膰e "
-"ignorisati va拧e pode拧enje tipa konekcije."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Pode拧avanje OKI winprinter-a"
+msgid "reconfigure"
+msgstr "rekonfiguri拧i"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Ako 拧tampa膷 nije naveden, izaberite kompatibilan (pogledajte uputstva za "
-"拧tampa膷) ili sli膷an."
+"Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje sa XFree %s,\n"
+"PA沤NJA OVO JE EKSPERIMENTALNA PODR艩KA I MO沤E ZALEDITI VA艩 RA膶UNAR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Molim provjerite da li je Printerdrake izvr拧io ispravno automatsko "
-"prepoznavanje modela va拧eg 拧tampa膷a. Potra啪ite ispravan model na listi ako "
-"kursor stoji na pogre拧nom modelu ili na \"Raw 拧tampa膷\"."
+msgid "Xinetd Service"
+msgstr "Xinetd servis"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Koji model 拧tampa膷a imate?"
+msgid "access to network tools"
+msgstr "pristup mre啪nim alatima"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Izbor modela 拧tampa膷a"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Upload firmware-a za HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "膶itam bazu podataka o 拧tampa膷ima ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 vam omogu膰uje da potjerate va拧 multimedijalni ra膷unar do "
+"krajnjih granica! Koristite najnoviji softver za slu拧anje muzike i audio "
+"datoteka, mijenjajte i organizujte va拧e slike i fotografije, gledajte TV i "
+"video-snimke i mnogo drugog"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Izaberite model ru膷no"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Ovdje je lista svih automatski prepoznatih 拧tampa膷a."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Model je ispravan"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Gre拧ka u instaliranju aboota, \n"
+"da li da poku拧am nasilnu instalaciju 膷ak i ako to uni拧ti prvu particiju?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
-"prepoznavanja 拧tampa膷a sa modelima koji su navedeni u njegovoj bazi podataka "
-"kako bi na拧ao najbli啪i. Ovaj izbor mo啪da nije ta膷an, pogotovo ako va拧 "
-"拧tampa膷 uop拧te nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
-"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
-"\"Izaberite model ru膷no\" kako biste ru膷no izabrali va拧 model 拧tampa膷a na "
-"sljede膰em ekranu.\n"
+"options description:\n"
"\n"
-"Za va拧 拧tampa膷 Printerdrake je na拧ao:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time ( about 1000% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Model va拧eg 拧tampa膷a"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Vrati izabrane\n"
+"datoteke"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Pripremam bazu podataka o 拧tampa膷ima..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s ve膰 postoji, da ga obri拧em?\n"
+"\n"
+"Upozorenje: Ako ste ve膰 jednom obavili ovaj proces, vjerovatno\n"
+"trebate o膷istiti unos iz liste autoriziranih klju膷eva na serveru."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Lokacija"
+msgid "Please fill or check the field below"
+msgstr "Molimo ispunite ili provjerite polje ispod"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Opis"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "沤elite li spasiti izmjene /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Naziv 拧tampa膷a"
+msgid "Boot Protocol"
+msgstr "Boot protokol"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svakom 拧tampa膷u treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
-"nije potrebno popuniti. Oni su komentari za korisnike."
+msgid "LVM-disks %s\n"
+msgstr "LVM-diskovi %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Unesite ime 拧tampa膷a i komentare"
+msgid "The package %s is needed. Install it?"
+msgstr "Potreban je paket %s. Da li ga 啪elite instalirati?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Omogu膰ujem pristup 拧tampa膷u putem CUPSa..."
+msgid "On boot"
+msgstr "Prilikom boota"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Provjeravam ure膽aj i pode拧avam HPOJ..."
+msgid "Bus identification"
+msgstr "Identifikacija sabirnice (busa)"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-"Pristup foto memorijskoj kartici na va拧em HP multifunkcionalnom ure膽aju"
+msgid "Please make a backup of your data first"
+msgstr "Molim najprije napravite backup va拧ih podataka"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram pomo膰u HP multifunkcijskog ure膽aja"
+msgid "Vatican"
+msgstr "Vatikan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaliram mtools pakete..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr ""
+"Imate vi拧e od jednog hard diska. Na koji od njih 啪elite instalirati Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaliram SANE pakete..."
+msgid "Boot ISO"
+msgstr "Boot ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ pakete..."
+msgid "Eritrea"
+msgstr "Eritreja"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Da li je va拧 拧tampa膷 multifunkcijski ure膽aj od HPa ili Sony-ja (OfficeJet, "
-"PSC, LaserJet 1100/1200/1220/3200/3300 sa skenerom, Sony IJP-V100), ili HP "
-"PhotoSmart ili HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Pobri拧i listu"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Trebate unijeti komandnu liniju!"
+msgid "A customizable environment"
+msgstr "Prilagodljiva okolina"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Komandna linija"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Ovdje mo啪ete navesti bilo koju komandnu liniju kojoj 膰e biti proslje膽en "
-"zadatak umjesto direktnog slanja na 拧tampa膷."
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Spoji (pipe) na komandu"
+msgid "Which printer model do you have?"
+msgstr "Koji model 拧tampa膷a imate?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Detektovani model: %s %s"
+msgid "Add a new printer"
+msgstr "Dodaj novi 拧tampa膷"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
+msgid " All of your selected data have been "
+msgstr " Svi va拧i izabrani podaci su "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI ure膽aja 拧tampa膷a"
+msgid "<-- Delete"
+msgstr "<-- Obri拧i"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Mo啪ete dati direktno URI za pristup 拧tampa膷u. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite pa啪nju da nisu svi tipovi URIja "
-"podr啪ani od svih spoolera."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Hostname 拧tampa膷a ili IP adresa"
+msgid "chunk size"
+msgstr "veli膷ina chunka"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "opcija prije bootanja, ili 'c' za komandnu liniju."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Nedostaje hostname 拧tampa膷a ili IP adresa!"
+msgid "Problems installing package %s"
+msgstr "Problemi tokom instaliranja paketa %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-"Da biste 拧tampali na TCP ili socket 拧tampa膷, morate dati hostname ili IP "
-"adresu 拧tampa膷a i opcionalno broj porta (podrazumjeva se 9100). Na HP "
-"JetDirect serverima broj porta je obi膷no 9100, na ostalim serverima on mo啪e "
-"varirati. Pogledajte priru膷nik va拧eg hardware-a."
+"Primi膰ete upozorenje ako je optere膰enje (system load) ve膰e od ove vrijednosti"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Izaberite jedan od automatski prepoznatih 拧tampa膷a sa liste ili unesite ime "
-"ra膷unara ili IP i opcionalno broj porta (podrazumjeva se 9100) u polja za "
-"unos."
+"\n"
+"\n"
+"Da prijavite bug, kliknite na dugme Prijavi.\n"
+"Ovo 膰e otvoriti prozor web browsera na https://drakbug.mandrakesoft.com\n"
+" gdje 膰ete prona膰i formular koji treba popuniti. Gore prikazane informacije "
+"膰e biti \n"
+"poslane na taj server\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket opcije 拧tampa膷a"
+msgid "Add a scanner manually"
+msgstr "Ru膷no dodaj skener"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Ponovo u膷itaj tabelu particija"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Da, 啪elim da se autologiram sa ovim (korisnik, desktop)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Pretra啪ujem mre啪u..."
+msgid "Search for fonts in installed list"
+msgstr "Pretra啪i fontove na listi instaliranih"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Auto prepoznavanje 拧tampa膷a"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Lokalna mre啪a se ne zavr拧ava sa `.0', izlazim."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
+msgid "Boot"
+msgstr "Boot"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
+msgid "Tuner type:"
+msgstr "Vrsta tunera:"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Naziv reda za 拧tampu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Sada je vrijeme da izaberete sistem 拧tampe za va拧 ra膷unar. Drugi OSi\n"
+"vam mo啪da nude jedan, ali Mandrake Linux nudi dva. Svaki od ovih sistema\n"
+"je najbolji za odre膽enu vrstu konfiguracije.\n"
+"\n"
+"* \"pdq\" -- skra膰eno za ''拧tampaj i nemoj stavljati u red'' (print, don't "
+"queue) je\n"
+"najbolji izbor ako imate direktnu vezu na 拧tampa膷, 啪elite izlaz za paniku u\n"
+"slu膷ajevima zaglavljivanja papira i nemate mre啪ne 拧tampa膷e. (\"pdq\" mo啪e\n"
+"rije拧iti samo vrlo jednostavne mre啪ne slu膷ajeve i pomalo je spor kada se "
+"koristi\n"
+"sa mre啪ama.) Preporu膷ujemo da koristite \"pdq\" ako je ovo va拧e prvo "
+"iskustvo\n"
+"sa GNU/Linuxom.\n"
+"\n"
+"* \"%s\" - ''Common Unix Printing System'' (uobi膷ajeni UNIX sistem 拧tampe)\n"
+"je odli膷an izbor za 拧tampanje na 拧tampa膷 koji se nalazi lokalno ili s druge "
+"strane\n"
+"planete. Vrlo ga je jednostavno podesiti i mo啪e slu啪iti kao server ili "
+"klijent za\n"
+"prastari \"lpd\" sistem 拧tampe, tako da je kompatibilan sa starijim "
+"operativnim\n"
+"sistemima kojima mo啪da jo拧 trebaju usluge 拧tampanja. Mada je vrlo mo膰an,\n"
+"osnovno pode拧avanje je skoro jednako lagano kao za \"pdq\". Ako 啪elite\n"
+"simulirati \"lpd\" server, provjerite da li ste pokrenuli \"cups-lpd\" "
+"servis.\n"
+"\"%s\" uklju膷uje grafi膷ke alate za 拧tampanje ili izbor opcija 拧tampa膷a,\n"
+"te za upravljanje 拧tampa膷em.\n"
+"\n"
+"Ako sada napravite izbor, pa kasnije zaklju膷ite da vam se ne svi膽a izabrani\n"
+"sistem 拧tampe, mo啪ete ga promijeniti pokretanjem PrinterDrake iz Mandrake\n"
+"Kontrolnog centra i klikanjem na dugme Ekspert."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printer Server"
+msgid "\"Menu\" key"
+msgstr "\"Meni\" tipka"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Da biste 拧tampali na NetWare 拧tampa膷, trebate dati naziv NetWare print "
-"servera (Pa啪nja! Ono mo啪e biti razli膷ito od njegovog TCP/IP imena!) kao i "
-"naziv reda za 拧tampu na 拧tampa膷u kojem 啪elite pristupiti i eventualno "
-"korisni膷ko ime i 拧ifru."
+"\n"
+"\n"
+"Molim provjerite da li je Printerdrake izvr拧io ispravno automatsko "
+"prepoznavanje modela va拧eg 拧tampa膷a. Potra啪ite ispravan model na listi ako "
+"kursor stoji na pogre拧nom modelu ili na \"Raw 拧tampa膷\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare 拧tampa膷a"
+msgid "Security Administrator:"
+msgstr "Sigurnosni administrator:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+msgid "Please enter your login"
+msgstr "Molimo unesite va拧 login"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-"Povezati 拧tampa膷 na Linux server i dopustiti Windows ra膷unarima da se "
-"spajaju na njega kao klijenti.\n"
-"\n"
-"Da li zaista 啪elite nastaviti sa pode拧avanjem 拧tampa膷a kako ste zapo膷eli?"
+"ako je postavljeno na da, provjerava privilegije datoteka u korisni膷kom home-"
+"u."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Podesite va拧 Windows server tako da je 拧tampa膷 dostupan putem IPP protokola "
-"i podesite 拧tampanje sa ove ma拧ine koriste膰i \"%s\" tip konekcije u "
-"Printerdrake-u.\n"
-"\n"
+"Nemate nijednu Internet konekciju.\n"
+"Napravite jednu klikaju膰i na 'Podesi'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Kopiranje fontova"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatizovano"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "沤elite li testirati konfiguraciju?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "艩tampa膷 \"%s\" je uspje拧no uklonjen iz Star/Open Offica."
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Upravo 膰ete podesiti 拧tampanje na Windows ra膷un za拧ti膰en 拧ifrom. Zbog "
-"propusta u arhitekturi Samba klijentskog softvera, 拧ifra je stavljena u "
-"obi膷nom tekstu u komandnu liniju Samba klijenta prilikom slanja zadatka "
-"拧tampe Windows serveru. Stoga je mogu膰e da drugi korisnici ovog istog "
-"ra膷unara prika啪u 拧ifru na ekranu koriste膰i komandu kao 拧to je \"ps auxwww"
-"\".\n"
+"Standardan: Ovo je standardna sigurnost koja se preporu膷uje za ra膷unar koji "
+"膰e biti kori拧ten za\n"
+" spajanje na Internet kao klijent.\n"
"\n"
-"Preporu膷ujemo kori拧tenje jedne od sljede膰ih alternativa (u svakom slu膷aju "
-"pobrinite se da samo ra膷unari na va拧oj lokalnoj mre啪i imaju pristup Windows "
-"serveru, na primjer koriste膰i firewall):\n"
+"Visok: Postoje ve膰 neka ograni膷enja, a automatizovane provjere se "
+"vr拧e svake no膰i.\n"
"\n"
-"Koristite ra膷un bez 拧ifre na Windows serveru, kao 拧to je \"GUEST\" ra膷un ili "
-"poseban ra膷un posve膰en 拧tampanju. Nemojte ukloniti za拧titu 拧ifrom sa va拧eg "
-"li膷nog ra膷una ili administratorskog ra膷una.\n"
+"Vi拧i: Sigurnost je sada dovoljno visoka da bi se sistem mogao "
+"koristiti kao server koji\n"
+" prihvata konekcije od mnogih klijenata. Ako je va拧 "
+"ra膷unar jedini klijent na Internetu,\n"
+" trebali biste izabrati ni啪i nivo.\n"
"\n"
-"Podesite va拧 Windows server tako da je 拧tampa膷 dostupan pod LPD protokolom. "
-"Zatim podesite 拧tampanje na ovom ra膷unaru uz konekciju tipa \"%s\" u "
-"Printerdrake-u.\n"
+"Paranoi膷an: Ovo je sli膷no kao prethodni nivo, ali je sistem potpuno "
+"zatvoren i sigurnosne\n"
+" mogu膰nosti su na maksimumu.\n"
"\n"
+"Sigurnosni administrator:\n"
+" Ako je postavljena opcija 'Sigurnosna upozorenja', ova "
+"upozorenja 膰e biti slana ovom\n"
+" korisniku (korisni膷ko ime ili email)."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIGURNOSNO UPOZORENJE!"
+msgid "Save packages selection"
+msgstr "Spasi izbor paketa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
+msgid "Remove the last item"
+msgstr "Ukloniti zadnju stavku"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Lista korisnika za vra膰anje (samo najsvje啪iji datum po korisniku je zna膷ajan)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Auto prepoznat"
+msgid "No net boot images created!"
+msgstr "Nije napravljena boot image!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Radna grupa"
+msgid "use pptp"
+msgstr "koristi pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Share naziv"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB server IP"
+msgid "Learn how to use this printer"
+msgstr "Saznaj kako koristiti ovaj 拧tampa膷"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB server ime"
+msgid "Configure the network now"
+msgstr "Sada podesite mre啪u"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Ako je 啪eljeni 拧tampa膷 automatski prepoznat, jednostavno ga izaberite sa "
-"liste i dodajte korisni膷ko ime, 拧ifru i/ili radnu grupu ako je to potrebno."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Izaberite mirror sa kojeg 膰e biti dobavljeni paketi"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Da biste 拧tampali na SMB 拧tampa膷, morate dati ime SMB ra膷unara (Pa啪nja! Ono "
-"mo啪e biti razli膷ito od TCP/IP imena!) i eventualno IP adresu print servera, "
-"kao i share naziv 拧tampa膷a kojem 啪elite pristupiti i korisni膷ko ime, 拧ifru i "
-"informacije o radnoj grupi."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) 拧tampa膷a"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "艩tampa膷 \"%s\" na serveru \"%s\""
+"FAT resizer ne mo啪e izmijeniti va拧u particiju, \n"
+"do拧lo je do sljede膰e gre拧ke: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", 拧tampa膷 \"%s\" na serveru \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Na koji sektor je 啪elite premjestiti?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog 拧tampa膷a nedostaje!"
+msgid "Do you want to click on this button?"
+msgstr "Da li 啪elite kliknuti na ovo dugme?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog ra膷unara nedostaje!"
+msgid "Bahamas"
+msgstr "Bahami"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Ime udaljenog 拧tampa膷a"
+msgid "Manual configuration"
+msgstr "Ru膷no pode拧avanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Ime udaljenog ra膷unara"
+msgid "search"
+msgstr "pretra啪ivanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Da biste koristili udaljeni lpd 拧tampa膷, morate dati ime ra膷unara za printer "
-"server i ime 拧tampa膷a na tom serveru."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd 拧tampa膷a"
+"Ovaj paket u膷itava izabranu mapu tastature kao 拧to je pode拧eno u\n"
+"/etc/sysconfig/keyboard, 拧to se mo啪e podesiti kori拧tenjem kbdconfig\n"
+"programa. Ovaj servis biste trebali ostaviti uklju膷enim na ve膰ini ra膷unara."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Ru膷no pode拧avanje"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installation display driver)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati ili unijeti 拧tampa膷 / ure膽aj!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zeroconf ime ra膷unara ne smije sadr啪avati ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
-"LPT2:, ..., prvi USB 拧tampa膷: /dev/usb/lp0, drugi USB 拧tampa膷: /dev/usb/"
-"lp1, ...)."
+"Syslog je sistem pomo膰u kojeg mnogi servisi zapisuju poruke\n"
+"u razne sistemske dnevnike (logove). Pametno je uvijek imati pokrenuti "
+"syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Molimo izaberite na koji port je priklju膷en va拧 拧tampa膷."
+msgid "Unknown/Others"
+msgstr "Nepoznat/Ostali"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Molimo izaberite port na koji je va拧 拧tampa膷 povezan ili unesite naziv "
-"ure膽aja / naziv datoteke na ulaznoj liniji"
+msgid "No TV Card detected!"
+msgstr "Nije detektovana TV kartica!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Opcije"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Molim izaberite 拧tampa膷 kojem 啪elite slati zadatke 拧tampe."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "艩tampa膷 \"%s\" je sada pode拧en kao podrazumjevani 拧tampa膷."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Molim odaberite 拧tampa膷 koji 啪elite podesiti. Pode拧avanje 拧tampa膷a 膰e raditi "
-"potpuno automatski. Ako va拧 拧tampa膷 nije ispravno prepoznat ili ako 啪elite "
-"sami podesiti 拧tampa膷, uklju膷ite \"Ru膷no pode拧avanje\"."
+"Sada pode拧avate OK laserski winprinter. Ovi 拧tampa膷i\n"
+"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
+"spojeni na prvom paralelnom portu. Ako je va拧 拧tampa膷 spojen na neki drugi "
+"port ili na print server molimo spojite 拧tampa膷 na prvi paralelni port prije "
+"nego 拧to od拧tampate testnu stranicu. Ina膷e 拧tampa膷 ne膰e raditi. Drajver 膰e "
+"ignorisati va拧e pode拧enje tipa konekcije."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Ovdje je lista svih automatski prepoznatih 拧tampa膷a."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Generacija procesora (npr: 8 za PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Trenutno nije dostupna nijedna alternativa"
+msgid "Auto-detected"
+msgstr "Auto prepoznat"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Pode拧avanje 拧tampa膷a 膰e raditi potpuno automatski. Ako va拧 拧tampa膷 nije "
-"ispravno prepoznat ili ako 啪elite sami podesiti 拧tampa膷, uklju膷ite \"Ru膷no "
-"pode拧avanje\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Sljede膰i 拧tampa膷 je prepoznat automatski."
+"Sada 膰ete podesiti instalacioni server, koji se sastoji od PXE servera (DHCP "
+"servera) i TFTP servera.\n"
+"Sa ovom opcijom, mo膰i 膰ete instalirati Mandrake Linux na druge ra膷unare na "
+"va拧oj lokalnoj mre啪i koriste膰iovaj ra膷unar kao izvor.\n"
+"\n"
+"Prije nego 拧to nastavite, provjerite da li ste podesili mre啪ni/internet "
+"pristup koriste膰i drakconnect.\n"
+"\n"
+"Napomena: potreban vam je poseban Mre啪ni adapter da biste podesili Lokalnu "
+"mre啪u (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Molimo izaberite 拧tampa膷 kojem 啪elite slati zadatke 拧tampe ili unesite naziv "
-"ure膽aja / naziv datoteke na ulaznoj liniji"
+"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija 膰e "
+"nastaviti, ali da biste bootali va拧 sistem, morate kreirati bootstrap "
+"particiju u DiskDrake-u"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12296,1091 +12127,781 @@ msgstr ""
"Molimo izaberite 拧tampa膷 koji 啪elite podesiti ili unesite naziv ure膽aja / "
"naziv datoteke na ulaznoj liniji"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativno, mo啪ete nasvesti naziv ure膽aja / naziv datoteke na ulaznoj "
-"liniji"
+msgid "Refuse"
+msgstr "Odbij"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Ako to nije onaj koji 啪elite podesiti, uneiste naziv ure膽aja / naziv "
-"datoteke u ulaznu liniju"
+"HardDrake ispituje hardware i eventualno pode拧ava novi ili\n"
+"izmjenjeni hardware."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Dostupni 拧tampa膷i"
+msgid "Remote Printers"
+msgstr "Udaljeni 拧tampa膷i"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Nije prona膽en nijedan 拧tampa膷!"
+msgid "Creating and formatting file %s"
+msgstr "Kreiram i formatiram datoteku %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti naziv ure膽aja ili datoteke!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Nije prona膽en nijedan lokalni 拧tampa膷! Ako 啪elite ru膷no instalirati 拧tampa膷, "
-"unesite ime ure膽aja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
-"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB 拧tampa膷: /dev/"
-"usb/lp0, drugi USB 拧tampa膷: /dev/usb/lp1, ...)."
+"Za 拧tampa膷 HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom "
+"paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice "
+"(firmware koji se nalazi na CDu koji je do拧ao uz 拧tampa膷 ne radi) i izvadite "
+"firmware datoteku. Ovo 膰ete uraditi tako 拧to 膰ete raspakovati "
+"samoraspakuju膰u '.exe' datoteku koriste膰i 'unzip' alat, te potra啪iti "
+"datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. "
+"Ovdje 膰e je automatski prona膰i uploader skripta i poslati 拧tampa膷u svaki put "
+"kada 拧tampa膷 bude spojen i upaljen.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Lokalni 拧tampa膷"
+msgid "Choose an existing LVM to add to"
+msgstr "Izaberite postoje膰i LVM na koji 膰ete dodati"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB 拧tampa膷 \\#%s"
+msgid "xfs restart"
+msgstr "restart xfs-a"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "艩tampa膷 na paralelnom portu \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"艩tampa膷 \"%s\" ve膰 postoji,\n"
+"da li sigurno 啪elite prepisati ovu konfiguraciju?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "艩tampa膷 \"%s\" na SMB/Windows serveru \"%s\""
+msgid "No partition available"
+msgstr "Nema dostupnih particija"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Mre啪ni 拧tampa膷 \"%s\", port %s"
+msgid "Use the scanners on hosts: "
+msgstr "Koristi skenere na ra膷unaru:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
+msgid "Unselected All"
+msgstr "Ni拧ta izabrano"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", 拧tampa膷 \"%s\" na SMB/Windows serveru \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Domain Name Resolver"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", mre啪ni 拧tampa膷 \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "Klju膷 enkripcije (jo拧 jednom)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"膶estitamo, va拧 拧tampa膷 je sada instaliran i pode拧en!\n"
-"\n"
-"Mo啪ete 拧tampati koriste膰i komandu \"艩tampaj\" u va拧oj aplikaciji (obi膷no se "
-"nalazi u meniju \"Datoteka).\n"
-"\n"
-"Ako 啪elite dodati, ukloniti ili promijeniti ime 拧tampa膷a, ili ako 啪elite "
-"promijeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
-"拧tampe...), izaberite opciju \"艩tampa膷\" u \"Hardware\" sekciji Mandrake "
-"Kontrolnog centra."
+msgid "Samba share name missing!"
+msgstr "Naziv samba share-a nedostaje!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Automatski prepoznaj 拧tampa膷e spojene na Microsoft Windows ra膷unare"
+msgid "True Type install done"
+msgstr "Zavr拧ena True Type instalacija"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Automatski prepoznaj 拧tampa膷e spojene direktno na lokalnu mre啪u"
+msgid "Detection in progress"
+msgstr "Detekcija u toku"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automatski prepoznaj 拧tampa膷e spojene na ovaj ra膷unar"
+msgid "Build Whole Kernel -->"
+msgstr "Izgradi cijeli kernel -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Dobro do拧li u %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Boot ekran"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Sljede膰i 拧tampa膷\n"
"\n"
-"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
-"\n"
-"Ovaj 膷arobnjak 膰e vam pomo膰i da instalirate 拧tampa膷e spojene na ovaj "
-"ra膷unar.\n"
-"\n"
-"Ako imate 拧tampa膷 spojen na ovaj ra膷unar, molim priklju膷ite ga na ra膷unar i "
-"upalite ga kako bi bio auto-prepoznat.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne 啪elite "
-"podesiti 拧tampa膷 sada."
+"%s%s\n"
+"je direktno spojen na va拧 sistem"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
-"\n"
-"Ovaj 膷arobnjak 膰e vam pomo膰i da instalirate 拧tampa膷e spojene na ovaj ra膷unar "
-"ili spojene na mre啪u.\n"
-"\n"
-"Ako imate 拧tampa膷 spojen na ovaj ra膷unar, molim priklju膷ite ga na ra膷unar i "
-"upalite ga kako bi bio auto-prepoznat. Tako膽e mre啪ni 拧tampa膷i moraju biti "
-"spojeni i upaljeni.\n"
-"\n"
-"Obratite pa啪nju da detekcija mre啪nih 拧tampa膷a traje du啪e nego detekcija "
-"拧tampa膷a spojenih na ovaj ra膷unar. Stoga ugasite detekciju mre啪nih 拧tampa膷a "
-"ako vam ona nije potrebna.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne 啪elite "
-"podesiti 拧tampa膷 sada."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Dijeljenje 拧tampa膷a na ra膷unarima/mre啪ama:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
-"\n"
-"Ovaj 膷arobnjak 膰e vam pomo膰i da instalirate 拧tampa膷e spojene na ovaj "
-"ra膷unar, na mre啪u ili na udaljeni Windows ra膷unar\n"
-"\n"
-"Ako imate 拧tampa膷 spojen na ovaj ra膷unar, molim priklju膷ite ga na ra膷unar i "
-"upalite ga kako bi bio auto-prepoznat. Tako膽e mre啪ni 拧tampa膷i i Windows "
-"ra膷unari moraju biti povezani i upaljeni.\n"
-"\n"
-"Obratite pa啪nju da detekcija mre啪nih 拧tampa膷a traje du啪e nego detekcija "
-"拧tampa膷a spojenih na ovaj ra膷unar. Stoga ugasite detekciju mre啪nih 拧tampa膷a "
-"i/ili Windows 拧tampa膷a ako vam ona nije potrebna.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne 啪elite "
-"podesiti 拧tampa膷 sada."
+"Komanda \"%s\" tako膽er omogu膰ava izmjenu opcija za pojedina膷ni zadatak "
+"拧tampe. Jednostavno dodajte 啪eljena pode拧enja na komandnu liniju, npr. \"%s "
+"<datoteka>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
-"\n"
-"Ovaj 膷arobnjak vam omogu膰uje da instalirate lokalne ili udaljene 拧tampa膷e "
-"koji 膰e biti kori拧teni sa ovog ra膷unara, a tako膽er i sa drugih ra膷unara na "
-"mre啪i.\n"
-"\n"
-"On 膰e od vas tra啪iti sve potrebne informacije kako bi 拧tampa膷 bio pode拧en, a "
-"vama omogu膰en pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
-"konekcije 拧tampa膷a."
+"U nekim slu膷ajevima, %s drajver treba imati dodatne informacije za\n"
+"ispravan rad, iako on obi膷no radi dobro i bez njih. 沤elite li navesti neke\n"
+"ekstra opcije za njega ili dozvoliti drajveru da ispita va拧 ra膷unar za sve\n"
+"informacije koje mu trebaju? Povremeno, ispitivanje mo啪e zaglaviti ra膷unar,\n"
+"ali ne bi trebalo izazvati nikakvu 拧tetu."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Neispravna oznaka CDa. Oznaka diska je %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Dobrodo拧li u alat za Dijeljenje Internet konekcije!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake nije mogao odrediti model va拧eg %s 拧tampa膷a. Molim izaberite "
-"odgovaraju膰i model na listi."
+"Kliknite na Podesi da pokrenete 膷arobnjak."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " na "
+msgid "Searching for new printers..."
+msgstr "Tra啪im nove 拧tampa膷e..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Pode拧avam 拧tampa膷 ..."
+msgid " (multi-session)"
+msgstr " (vi拧e sesija)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Tra啪im nove 拧tampa膷e..."
+msgid "Kernel Boot Timeout"
+msgstr "Vrijeme za boot kernela"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NAPOMENA: Ovisno o modelu 拧tampa膷a i sistemu 拧tampe, bi膰e instalirano do %d "
-"MB dodatnog softvera."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Sigurno 啪elite podesiti 拧tampanje na ovom ra膷unaru?\n"
+"Va拧a kartica mo啪e imati podr拧ku za 3D hardversko ubrzanje ali samo sa\n"
+"XFree %s. Va拧u karticu tako膽e podr啪ava XFree %s koji mo啪e imati bolju "
+"podr拧ku za 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Da li 啪elite omogu膰iti 拧tampanje na gore navedenim 拧tampa膷ima?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX Particioni 膷arobnjak je na拧ao sljede膰a rje拧enja:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Da li 啪elite da omogu膰ite 拧tampanje na 拧tampa膷ima u lokalnoj mre啪i?\n"
+msgid "Hungarian"
+msgstr "Ma膽arska"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"沤elite li omogu膰iti 拧tampanje na 拧tampa膷ima navedenim gore ili na 拧tampa膷ima "
-"u lokalnoj mre啪i?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "(Provjerite da li su svi 拧tampa膷i spojeni i upaljeni).\n"
+"Izaberite va拧eg providera.\n"
+" Ako nije na listi, izaberite Nije na listi"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Nema 拧tampa膷a koji su direktno povezani na ovaj ra膷unar"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatska sinhronizacija vremena (koriste膰i NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Na va拧 sistem je spojeno %d nepoznatih 拧tampa膷a"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Na va拧 sistem je direktno spojen jedan nepoznat 拧tampa膷"
+msgid "LDAP Server"
+msgstr "LDAP Server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Sljede膰i 拧tampa膷\n"
-"\n"
-"%s%s\n"
-"je direktno spojen na va拧 sistem"
+"PCMCIA podr拧ka slu啪i za ispravan rad ure膽aja kao 拧to su mre啪ne\n"
+"kartice i modemi, priklju膷enih na PCMCIA port (obi膷no na laptopima).\n"
+"Ne膰e se pokrenuti sve dok nije ispravno konfigurisan, tako da je\n"
+"sigurno imati ga instaliranog i na ra膷unarima kojima nije potreban."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Sljede膰i 拧tampa膷\n"
-"\n"
-"%s%s\n"
-"su direktno spojeni na va拧 sistem"
+msgid "Choose your country"
+msgstr "Izaberite va拧u dr啪avu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Sljede膰i 拧tampa膷i\n"
"\n"
-"%s%s\n"
-"su direktno spojeni na va拧 sistem"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "i %d nepoznatih 拧tampa膷a"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "i jedan nepoznat 拧tampa膷"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Proveravam va拧 sistem..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Restartujem CUPS..."
+"- sistemske datoteke:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Ovaj server je ve膰 na listi, ne mo啪ete ga ponovo dodati.\n"
+msgid "Standalone Tools"
+msgstr "Samostalni alati"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Primjeri ispravnih IPa:\n"
+msgid "Where"
+msgstr "Gdje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Unesena IP adresa nije ispravna.\n"
+msgid "but not matching"
+msgstr "but not matching"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Nedostaje IP adresa servera!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Ovdje mo啪ete izabrati alternativni drajver (ili OSS ili ALSA) za va拧u zvu膷nu "
+"karticu (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Ako nije naveden port, podrazumijeva膰e se 631."
+msgid "Configuring PCMCIA cards..."
+msgstr "Pode拧avam PCMCIA kartice..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "Unesite IP adresu i port ra膷unara 膷ije 拧tampa膷e 啪elite koristiti."
+msgid "kdesu missing"
+msgstr "nedostaje kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Pristupam 拧tampa膷ima na udaljenim CUPS serverima"
+msgid "Encryption key"
+msgstr "Klju膷 enkripcije"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Ukloni izabrani server"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Izmijeni izabrani server"
+msgid "Christmas Island"
+msgstr "Uskr拧nje ostrvo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Dodaj server"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Instalacija bootloadera nije uspjela. Do拧lo je do sljede膰e gre拧ke:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ovdje dodajte CUPS servere 膷ije 拧tampa膷e 啪elite koristiti. Ovo trebate "
-"raditi samo ako serveri ne broadcast-uju informacije o njihovim 拧tampa膷ima "
-"cijeloj lokalnoj mre啪i."
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI channel"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP adresa ra膷unara/mre啪e:"
+msgid "Set this printer as the default"
+msgstr "Podesi 拧tampa膷 kao podrazumjevani"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Ovaj ra膷unar/mre啪a je ve膰 na listi, ne mo啪ete ga ponovo dodati.\n"
+msgid "partition %s"
+msgstr "particiji %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Unesena IP adresa ra膷unara/mre啪e nije ispravna.\n"
+msgid "Paranoid"
+msgstr "Paranoi膷an"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Nedostaje IP adresa ra膷unara/mre啪e."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Izaberite mre啪u ili ra膷unar 膷ijim 拧tampa膷ima treba omogu膰iti pristup."
+msgid "<-- Del User"
+msgstr "<-- Obri拧i korisnika"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Dijeljenje lokalnih 拧tampa膷a"
+msgid "Location on the bus"
+msgstr "Lokacija na sabirnici"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Ukloni izabrani ra膷unar/mre啪u"
+msgid "No printer found!"
+msgstr "Nije prona膽en nijedan 拧tampa膷!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Izmijeni izabrani ra膷unar/mre啪u"
+msgid "the vendor name of the device"
+msgstr "naziv proizvo膽a膷a ure膽aja"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Dodaj ra膷unar/mre啪u"
+msgid "Erase entire disk"
+msgstr "Pobri拧i 膷itav disk"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr "Ovo su ra膷unari i mre啪e 膷iji lokalni 拧tampa膷i trebaju biti dostupni:"
+msgid " (Default)"
+msgstr " (Default)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa bi膰e "
-"provjereno da\n"
-"\n"
-"- je instaliran LPD/LPRng, CUPS ne膰e prepisati /etc/printcap\n"
-"\n"
-"- postoji /etc/cups/cupsd.conf, ako ne onda 膰e biti napravljen\n"
-"\n"
-"- informacije o 拧tampa膷u ne sadr啪e \"localhost\" kao ime servera prilikom "
-"broadcasta.\n"
+"Arguments: ()\n"
"\n"
-"Ako vam neke od ovih mjera stvaraju probleme, mo啪ete isklju膷iti ovu opciju, "
-"ali onda se morate sami brinuti da su navedeni uslovi ispunjeni."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatska ispravka konfiguracije CUPSa"
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Ako ovo uklju膷ite, mo膰i 膰ete 拧tampati obi膷ne tekstualne datoteke na "
-"japanskom jeziku. Koristite ovu funkciju samo ako zaista 啪elite 拧tampati "
-"japanski tekst, jer kada je aktivirana, vi拧e ne mo啪ete 拧tampati znakove sa "
-"akcentima u latini膷nim fontovima (npr. na拧a slova). Tako膽e ne膰ete mo膰i "
-"prilagoditi margine, veli膷ine znakova, itd. Ova postavka 膰e utjecati samo na "
-"拧tampa膷e koji su definisani na ovom ra膷unaru. Ako 啪elite 拧tampati japanski "
-"tekst na udaljenom ra膷unaru, trebate aktivirati ovu funkciju na tom ra膷unaru."
+msgid "Automatic reconfiguration"
+msgstr "Automatsko ponovno pode拧avanje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Japanski re啪im 拧tampanja"
+msgid "Receiving Speed:"
+msgstr "Brzina prijema:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Da biste pristupili 拧tampa膷ima na udaljenim CUPS serverima u va拧oj lokalnoj "
-"mre啪i, sve 拧to treba je da uklju膷ite opciju \"Automatski prona膽i dostupne "
-"拧tampa膷e na udaljenim ra膷unarima\"; CUPS serveri 膰e automatski informisati "
-"va拧 ra膷unar o svojim 拧tampa膷ima. Svi 拧tampa膷i koji su poznati va拧em ra膷unaru "
-"su navedeni u sekciji \"Udaljeni 拧tampa膷i\" glavnog Printerdrake prozora. "
-"Ako va拧 CUPS server nije u lokalnoj mre啪i, morate ovdje unijeti njegovu IP "
-"adresu i eventualno broj porta kako biste dobili informacije od servera."
+msgid "Turks and Caicos Islands"
+msgstr "Turks i Caicos ostrva"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Ni拧ta"
+msgid "permissions"
+msgstr "privilegije"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Dodatni CUP serveri:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Nema udaljenih ra膷unara"
+msgid "<- Previous"
+msgstr "<- Nazad"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Vlastita konfiguracija"
+msgid "Internet Connection Sharing configuration"
+msgstr "Pode拧avanje dijeljenja Internet konekcije"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Dijeljenje 拧tampa膷a na ra膷unarima/mre啪ama:"
+msgid "Toggle between flat and group sorted"
+msgstr "Prekida膷 izme膽u ravnog i grupnog sortiranja"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automatski prona膽i dostupne 拧tampa膷e na udaljenim ra膷unarima"
+msgid "Themes"
+msgstr "Teme"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "艩tampa膷i na ovom ra膷unaru su dostupni drugim ra膷unarima"
+msgid "Options: %s"
+msgstr "Opcije: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Tako膽e mo啪ete odlu膷iti da li 拧tampa膷i na udaljenim ra膷unarima trebaju biti "
-"automatski dostupni sa ovog ra膷unara."
+"Trenutno koristite %s kao boot manager.\n"
+"Kliknite na Konfiguri拧i kako bi se pokrenuo 膷arobnjak za pode拧avanje."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Ovdje mo啪ete izabrati da li 拧tampa膷i spojeni na ovaj ra膷unar trebaju biti "
-"dostupni drugim ra膷unarima i kojim drugim ra膷unarima."
+msgid "OKI winprinter configuration"
+msgstr "Pode拧avanje OKI winprinter-a"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Pode拧avanje CUPS 拧tampa膷a"
+msgid "Saint Helena"
+msgstr "Saint Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Automatsko prepoznavanje 拧tampa膷a (lokalni, TCP/Socket i SMB 拧tampa膷i)"
+msgid "Security Level"
+msgstr "Sigurnosni nivo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Neki koraci nisu dovr拧eni.\n"
"\n"
-"Ovdje ne morate pode拧avati 拧tampa膷e na udaljenim CUPS serverima; ovi "
-"拧tampa膷i 膰e biti automatski prepoznati."
+"Da li zaista 啪elite iza膰i sada?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Kako je 拧tampa膷 povezan na ra膷unar?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju 拧tampa膷a"
+msgid "Polish (qwertz layout)"
+msgstr "Poljska (qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Za 拧tampa膷 HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom "
-"paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice "
-"(firmware koji se nalazi na CDu koji je do拧ao uz 拧tampa膷 ne radi) i izvadite "
-"firmware datoteku. Ovo 膰ete uraditi tako 拧to 膰ete raspakovati "
-"samoraspakuju膰u '.exe' datoteku koriste膰i 'unzip' alat, te potra啪iti "
-"datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. "
-"Ovdje 膰e je automatski prona膰i uploader skripta i poslati 拧tampa膷u svaki put "
-"kada 拧tampa膷 bude spojen i upaljen.\n"
+msgid "Syria"
+msgstr "Sirija"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumenti: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Pode拧ava korisni膷ki umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumenti: (val)\n"
-"\n"
-"Postavlja istek vremena shella. Vrijednost nula zna膷i bez isteka vremena."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Dobro do拧li u %s izbornik operativnog sistema!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumenti: (size)\n"
+"Izaberite operativni sistem na listi gore ili\n"
+"sa膷ekajte %d sekundi do pokretanja podrazumjevanog OSa.\n"
"\n"
-"Postavlja veli膷inu historije naredbi shella. Vrijednost -1 zna膷i "
-"neograni膷eno."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka."
+msgid "Portuguese"
+msgstr "Portugalska"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "ako je postavljeno na da, provjerava otvorene portove."
+msgid "Loopback file name: "
+msgstr "Naziv loopback datoteke: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"ako je uklju膷eno, 拧alje mail izvje拧taj na ovu email adresu, ina膷e ga 拧alje "
-"root-u."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Adresa DNS servera treba biti u formatu 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere mailom."
+msgid "Serbia"
+msgstr "Srbija"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"ako je postavljeno na da, provjerava datoteke/direktorije koje svako mo啪e "
-"pisati."
+msgid "Newzealand"
+msgstr "Novi Zeland"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere na tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "ako je postavljeno na da, izvr拧ava neke provjere rpm baze podataka."
+msgid "CapsLock key"
+msgstr "CapsLock tipka"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"ako je postavljeno na da, provjerava da li su mre啪ni ure膽aji u "
-"promiskuitetnom modu."
+msgid "Install bootloader"
+msgstr "Instalacija bootloadera"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "ako je postavljeno na da, izvr拧ava chkrootkit provjere."
+msgid "Select the memory size of your graphics card"
+msgstr "Izaberite veli膷inu memorije va拧e grafi膷ke karte"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"ako je postavljeno na da, provjerava privilegije datoteka u korisni膷kom home-"
-"u."
+"[OPTIONS]\n"
+"Aplikacija za povezivanje na mre啪u/Internet i nadzor veze\n"
+"\n"
+"--defaultintf interface : podesi podrazumijevani interfejs\n"
+"--connect : spoji se na Inernet, ako nisi ve膰 spojen\n"
+"--disconnect : prekini vezu s Internetom, ako si spojen\n"
+"--force : koristi se sa (dis)connect : prinudi operaciju.\n"
+"--status : vra膰a 1 ako je spojen, u suprotnom 0.\n"
+"--quiet : bez interaktivnosti. Koristi se sa (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka."
+msgid "Dynamic IP Address Pool:"
+msgstr "Raspon dinami膷kih IP adresa:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere u syslog."
+msgid "LVM name?"
+msgstr "Naziv LVMa?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"ako je postavljeno na da, provjerava prazne 拧ifre, nedostatak 拧ifre u /etc/"
-"shadow i korisnike sa id-om 0 koji nisu root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Uklonjeni su neki ure膽aji u \"%s\" klasi hardvera:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "ako je postavljeno na da, izvr拧ava dnevne sigurnosne provjere."
+msgid "Found %s %s interfaces"
+msgstr "Prona膽eno %s %s interfejsa"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "ako je postavljeno na da, provjerava checksum suid/sgid datoteka."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "ako je postavljeno na da, provjerava prazne 拧ifre u /etc/shadow."
+msgid "Post Install"
+msgstr "Post Install"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "ako je postavljeno na da, prijavljuje datoteke bez vlasnika."
+msgid "The internal domain name"
+msgstr "Interno domensko ime"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumenti: (umask)\n"
-"\n"
-"Postavlja root-ov umask."
+msgid "Card IRQ"
+msgstr "IRQ kartice"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Argumenti: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Pode拧ava korisni膷ki umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Aplikacija za uvoz i nadzor fontova \n"
+"--windows_import : uvezi sa dostupnih windows particija.\n"
+"--xls_fonts : prika啪i sve postoje膰e fontove koje prijavljuje xls\n"
+"--strong : jaka provjera fonta.\n"
+"--install : instaliraj bilo koji font ili direktorij.\n"
+"--uninstall : deinstaliraj bilo koji font ili direktorij.\n"
+"--replace : zamijeni font ako vec postoji\n"
+"--application : 0 bez aplikacija.\n"
+" : 1 podr拧ka za sve poznate aplikacije.\n"
+" : ime_aplikacije kao so za staroffice \n"
+" : i gs za ghostscript za samo tu aplikaciju."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+"Izaberite disketnu jedinicu koju 啪elite koristiti da napravite boot disketu"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
+msgstr "LILO sa tekstualnim menijem"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
+msgstr "Sve (bez firewalla)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "You must specify a kernel image"
+msgstr "Morate navesti image kernela"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
+msgstr ", vi拧enamjenski ure膽aj na USBu"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Do"
+msgstr "Uradi"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litvanska AZERTY (stara)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilska (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
+msgstr "IP adresa ra膷unara/mre啪e:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"koordinate progresne trake y\n"
+"tj. njenog lijevog ugla"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "System installation"
+msgstr "Instalacija sistema"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent and the Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Datoteka/_Otvori"
#: ../../security/help.pm:1
#, c-format
@@ -13395,954 +12916,836 @@ msgstr ""
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+msgid "Location of auto_install.cfg file"
+msgstr "Lokacija datoteke auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+msgid "Open Firmware Delay"
+msgstr "膶ekanje na Open Firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
+msgid "Hungary"
+msgstr "Ma膽arska"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "Total progess"
+msgstr "Ukupno napredak"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
+msgid "Color configuration"
+msgstr "Pode拧avanje boje"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "New Zealand"
+msgstr "Novi Zeland"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"Ve膰 postoje odre膽ena ograni膷enja, a vi拧e automatskih provjera se pokre膰e "
+"svaku no膰."
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "please choose the date to restore"
+msgstr "molim izaberite datum za vra膰anje"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Switching from ext2 to ext3"
+msgstr "Prebacujem sa ext2 na ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "Nizozemski Antili"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
+msgstr "Browse to new restore repository."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
+"\n"
+"Ovaj 膷arobnjak vam omogu膰uje da instalirate lokalne ili udaljene 拧tampa膷e "
+"koji 膰e biti kori拧teni sa ovog ra膷unara, a tako膽er i sa drugih ra膷unara na "
+"mre啪i.\n"
+"\n"
+"On 膰e od vas tra啪iti sve potrebne informacije kako bi 拧tampa膷 bio pode拧en, a "
+"vama omogu膰en pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
+"konekcije 拧tampa膷a."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sigurnosni administrator (login ili email)"
+msgid "and %d unknown printers"
+msgstr "i %d nepoznatih 拧tampa膷a"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
+"Rani Intel Pentium procesori imaju bug u numeri膷kom koprocesoru koji ne "
+"posti啪e potrebnu preciznost prilikom izvr拧avanja dijeljenja sa teku膰im "
+"zarezom (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr ""
+"Nije prona膽ena nijedna ISDN PCI kartica. Molimo izaberite jednu na idu膰em "
+"ekranu."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Security level"
-msgstr "Nivo sigurnosti"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Molim izaberite nivo sigurnosti"
+msgid "Please give a user name"
+msgstr "Molimo navedite korisni膷ko ime"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec osnovne opcije"
+msgid "Enable CD Boot?"
+msgstr "Omogu膰i boot sa CDa?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
+msgid " enter `void' for void entry"
+msgstr " unesite `void' za prazan unos"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje mogu膰e koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata. Napomena: ako je va拧 ra膷unar samo klijent na "
-"Internetu, mo啪da je bolje da izaberete ni啪i nivo."
+msgid "on Hard Drive"
+msgstr "na hard disk"
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Ve膰 postoje odre膽ena ograni膷enja, a vi拧e automatskih provjera se pokre膰e "
-"svaku no膰."
+msgid "Winmodem connection"
+msgstr "Winmodem konekcija"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Ovo je standardna sigurnost koja je preporu膷ena za ra膷unar koji 膰e biti "
-"kori拧ten za spajanje na Internet kao klijent."
+"\n"
+"膶estitamo, va拧 拧tampa膷 je sada instaliran i pode拧en!\n"
+"\n"
+"Mo啪ete 拧tampati koriste膰i komandu \"艩tampaj\" u va拧oj aplikaciji (obi膷no se "
+"nalazi u meniju \"Datoteka).\n"
+"\n"
+"Ako 啪elite dodati, ukloniti ili promijeniti ime 拧tampa膷a, ili ako 啪elite "
+"promijeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
+"拧tampe...), izaberite opciju \"艩tampa膷\" u \"Hardware\" sekciji Mandrake "
+"Kontrolnog centra."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"艩ifra je sada aktivirana, ali kori拧tenje za mre啪ni ra膷unar jo拧 nije "
-"preporu膷eno."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti pa啪ljivo. On 膷ini va拧 sistem lak拧im za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti kori拧ten za ra膷unar koji je spojen na\n"
-"druge ili na Internet. Nema pristupa 拧ifrom."
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Sada mo啪ete pokrenuti xawtv (pod X Window sistemom!) !\n"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoi膷an"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Nemam dovoljno swap prostora da dovr拧im instalaciju, molimo dodajte jo拧"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Higher"
-msgstr "Vi拧i"
+msgid "%s on %s"
+msgstr "%s na %s"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga\n"
+"u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je "
+"sat\n"
+"na va拧oj mati膷noj plo膷i pode拧en na lokalno vrijeme, mo啪ete isklju膷iti ovu\n"
+"opciju isklju膷uju膰i \"Hardverski sat pode拧en na GMT\", 拧to 膰e saop拧titi\n"
+"GNU/Linuxu da su sistemski sat i hardverski sat u istoj vremenskoj zoni.\n"
+"Ovo je korisno kada se na ra膷unaru tako膽e nalazi i drugi operativni sistem\n"
+"kao 拧to je Windows.\n"
+"\n"
+"Opcija \"Automatsko uskla膽ivanje vremena\" 膰e automatski regulisati sat\n"
+"spajaju膰i se na udaljeni time server na Internetu. Kako bi ova mogu膰nost\n"
+"radila, morate imati ispravnu Internet konekciju. Najbolje je izabrati time "
+"server\n"
+"negdje u va拧oj blizini. Ova opcija 膰e ustvari instalirati time server koji "
+"mogu\n"
+"koristiti i drugi ra膷unari u va拧oj lokalnoj mre啪i."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Visok"
+msgid "Which is your timezone?"
+msgstr "Koja je va拧a vremenska zona?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Poor"
-msgstr "Lo拧"
+msgid "Guinea"
+msgstr "Gvineja"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Dobrodo拧li u Crackers"
+msgid "The system is now connected to the Internet."
+msgstr "Sistem je sada spojen na Internet."
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia i South Sandwich ostrva"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molimo izvr拧ite logout i zatim koristitite Ctrl-Alt-BackSpace"
+msgid "Japan (broadcast)"
+msgstr "Japan (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow i /etc/hosts.deny su ve膰 pode拧eni - bez izmjene"
+msgid "Mozambique"
+msgstr "Mozambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Najprije treba napraviti /etc/dhcpd.conf !"
+msgid "Icon"
+msgstr "Ikona"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Ne拧to je pogre拧no! - Da li je instaliran mkisofs?"
+msgid "Please choose what you want to backup"
+msgstr "Molim izaberite 拧ta 啪elite backupovati"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO image je %s"
+msgid "256 colors (8 bits)"
+msgstr "256 boja (8 bita)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Nema pogodne disketne jedinice!"
+msgid "Read-write"
+msgstr "膶itaj-pi拧i"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Sada mo啪ete izvaditi disketu"
+msgid "Size: %s\n"
+msgstr "Veli膷ina: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Ne mogu pristupiti disketi!"
+msgid "Hostname: "
+msgstr "Hostname: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Molimo ubacite disketu:"
+msgid "Chunk size %s\n"
+msgstr "Veli膷ina chunka %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Write Config"
-msgstr "Zapi拧i konfiguraciju"
+msgid "Build the future of Linux!"
+msgstr "Izgradite budu膰nost Linuxa!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Raspon dinami膷kih IP adresa:"
+msgid "Local Printer"
+msgstr "Lokalni 拧tampa膷"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Ve膰inu ovih vrijednosti uzimam iz\n"
-"va拧eg aktivnog sistema.\n"
-"Mo啪ete ih izmijeniti po potrebi."
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Pode拧avanje dhcpd servera"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Kraj IP raspona:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Po膷etak IP raspona:"
+msgid "ADSL connection"
+msgstr "ADSL konekcija"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name Servers:"
-msgstr "DNS serveri:"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Bez pode拧avanja, molim kliknite na 膶arobnjak ili Napredno.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Domain Name:"
-msgstr "Ime domena:"
+msgid "Error!"
+msgstr "Gre拧ka!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast adresa:"
+msgid "cable connection detected"
+msgstr "otkrivena kablovska konekcija"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet mask:"
+msgid "Permission denied transferring %s to %s"
+msgstr "Pristup odbijen pri prenosu %s na %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Routers:"
-msgstr "Routeri:"
+msgid "/_Report Bug"
+msgstr "/_Prijavi gre拧ku"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Resize"
+msgstr "Smanji"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
+msgid "Dominica"
+msgstr "Dominika"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Morate restartovati Display Manager da bi izmjene stupile na snagu. \n"
-"(na konzoli restartujte dm servis)"
+msgid "Please enter the device name to use for backup"
+msgstr "Molim unesite ime ure膽aja kojeg 膰ete koristiti za backup"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd pode拧avanje..."
+msgid "Resolution: %s\n"
+msgstr "Rezolucija: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Delete Client"
-msgstr "Obri拧i klijent"
+msgid "matching"
+msgstr "matching"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Izmijeni klijent"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Ne mogu pristupiti kernelskim modulima koji odgovaraju va拧em kernelu "
+"(nedostaje datoteka %s), 拧to obi膷no zna膷i da je va拧a boot disketa zastarjela "
+"u odnosu na instalacioni medij (napravite noviju boot disketu)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Dodaj klijenta -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod Windows\n"
+"operativnim sistemom, pod GNU/Linuxom se zove \"ttyS0\" ."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Omogu膰i thin klijente"
+msgid "The following packages are going to be removed"
+msgstr "Sljede膰i paketi 膰e biti uklonjeni"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Thin klijenti"
+msgid "Connect to the Internet"
+msgstr "Spoji se na Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Nije napravljena boot image!"
+msgid "Use existing partitions"
+msgstr "Koristi postoje膰u particiju"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "type: %s"
-msgstr "tip: %s"
+msgid "Canadian (Quebec)"
+msgstr "Kanadska (Kvebek)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Obri拧i korisnika"
+msgid "Mouse device: %s\n"
+msgstr "Ure膽aj mi拧a: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Add User -->"
-msgstr "Dodaj korisnika -->"
+msgid "Reselect correct fonts"
+msgstr "Ponovo izaberi ispravne fontove"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-"!!! Odre膽uje 拧ifru u sistemskoj bazi podataka koja se razlikuje\n"
-"od one u bazi podataka Terminal Servera.\n"
-"Obri拧ite i ponovo dodajte korisnika u Terminal Server da biste omogu膰ili "
-"pristup."
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Obri拧i sve NBIje"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Obri拧i"
+"options description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Ovo 膰e potrajati par minuta."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+"Kona膷no, bi膰ete upitani da li 啪elite vidjeti grafi膷ki interfejs nakon "
+"pokretanja.\n"
+"Primjetite da vam je ovo pitanje postavljeno 膷ak i ako izaberete da ne膰ete\n"
+"testirati konfiguraciju. O膷ito, trebate odgovoriti \"Ne\" ako 膰e va拧 "
+"ra膷unar\n"
+"imati ulogu servera ili ako imate problema sa pode拧avanjem ekrana."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Izgradi sve kernele -->"
+msgid "We are now going to configure the %s connection."
+msgstr "Sada 膰emo podesiti konekciju %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Nije izabran nijedan NIC!"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Izgradi jedan NIC -->"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake rezolucija"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "No kernel selected!"
-msgstr "Nije izabran kernel!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Auto prepoznavanje 拧tampa膷a"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Izgradi cijeli kernel -->"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "ne mogu na膰i nijedan font.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Boot ISO"
+msgid "Language"
+msgstr "Jezik"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Boot disketa"
+msgid "Printer model selection"
+msgstr "Izbor modela 拧tampa膷a"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+"Nakon promjene tipa particije %s, svi podaci na ovoj particiji 膰e biti "
+"izgubljeni"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-" Hvala:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "%d seconds"
+msgstr "%d sekundi"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Ubacite praznu disketu u jedinicu %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Dodaj/obri拧i klijente"
+msgid "A valid URI must be entered!"
+msgstr "Trebate unijeti ispravan URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Dodaj/obri拧i korisnike"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Prona拧ao sam interfejs \"%s\". 沤elite li ga koristiti ?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Net Boot Images"
+msgid "Re-configure interface and DHCP server"
+msgstr "Ponovo podesi interfejs i DHCP server"
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Sound configuration"
+msgstr "Pode拧avanje zvuka"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Zaustavi server"
+msgid "Photo test page"
+msgstr "Foto testna strana"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Pokreni server"
+msgid "Custom disk partitioning"
+msgstr "Ru膷no particioniranje diska"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Onemogu膰i server"
+msgid "Enter Printer Name and Comments"
+msgstr "Unesite ime 拧tampa膷a i komentare"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Omogu膰i server"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Sljede膰i 拧tampa膷i\n"
+"\n"
+"%s%s\n"
+"su direktno spojeni na va拧 sistem"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Pode拧avanje Mandrake Terminal servera"
+msgid "type: %s"
+msgstr "tip: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Ukloniti zadnju stavku"
+msgid "Slovakian (QWERTY)"
+msgstr "Slova膷ka (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Add an item"
-msgstr "Dodaj stavku"
+msgid "No Sound Card detected!"
+msgstr "Nije izabrana zvu膷na kartica!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Auto Install"
-msgstr "Auto instalacija"
+msgid "Mouse Port"
+msgstr "Port mi拧a"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"Disketa je uspje拧no napravljena.\n"
-"Sada mo啪ete ponoviti va拧u instalaciju."
+"Morate restartovati Display Manager da bi izmjene stupile na snagu. \n"
+"(na konzoli restartujte dm servis)"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Congratulations!"
-msgstr "膶estitamo!"
+msgid "Ftp Server"
+msgstr "FTP server"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Enable/Disable msec hourly security check."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Dobro do拧li.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
+"Enable/Disable msec hourly security check."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm fonts konverzija"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Vrsta sabirnice na koju je spojen mi拧"
+
+#: ../../lang.pm:1
#, c-format
-msgid "manual"
-msgstr "ru膷no"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"Molimo izaberite za svaki korak da li 膰ete ga ponoviti kao i u va拧oj "
-"instalaciji ili 膰e se obaviti ru膷no"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "replay"
-msgstr "ponovi"
+"Argumenti: (size)\n"
+"\n"
+"Postavlja veli膷inu historije naredbi shella. Vrijednost -1 zna膷i "
+"neograni膷eno."
-#: ../../standalone/drakautoinst:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada 膰ete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti kori拧tena uz pa啪nju.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-"Sa ovom opcijom bi膰ete u mogu膰nosti da ponovite instalaciju koju ste obavili "
-"na ovom ra膷unaru, pri 膰emu 膰ete biti interaktivno upitani za neke korake, "
-"kako biste promijenili njihove vrijednosti.\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje nikad ne膰e biti "
-"obavljeno automatski, bez obzira 拧ta izaberete tokom instalacije na ovaj "
-"ra膷unar.\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"Da li 啪elite nastaviti?"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Pode拧avanje auto instalacije"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu prona膰i potrebnu image datoteku '%s'"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "Gre拧ka!"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"options description:\n"
+"\"DrakX 膰e vam pru啪iti sa啪etak raznih informacija koje su prikupljene\n"
+"o va拧em sistemu. Ovisno o instaliranom hardveru, vjerovatno imate\n"
+"neke ili sve od navedenih stavki. Pojedina膷na stavka se sastoji od\n"
+"onoga 拧to je potrebno podesiti, nakon 膷ega slijedi kra膰i sa啪etak trenutne\n"
+"konfiguracije. Da biste ovo izmijenili, kliknite na odgovaraju膰e dugme "
+"\"Podesi\".\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+"* \"Tastatura\": provjerite trenutno mapu tastature i izmijenite je ako je\n"
+"potrebno.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Description:\n"
+"* \"Dr啪ava\": provjerite trenutno izabranu dr啪avu. Ako se nalazite negdje\n"
+"drugo, kliknite na dugme \"Podesi\" i izaberite neku drugu. Ako se va拧a\n"
+"zemlja ne nalazi na prikazanoj listi, kliknite na dugme \"Vi拧e\" da biste\n"
+"dobili cjelokupnu listu zemalja.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+"* \"Vremenska zona\": DrakX automatski odre膽uje va拧u vremensku zonu\n"
+"na osnovu dr啪ave koju ste izabrali. Mo啪ete kliknuti na dugme \"Podesi\"\n"
+"ako ovo nije ispravno.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+"* \"Mi拧\": provjerite trenutnu konfiguraciju mi拧a i klinire na dugme da je\n"
+"promijenite ako je to potrebno.\"\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"* \"艩tampa膷\": klikanjem na dugme \"Podesi\" otvori膰e se 膷arobnjak za\n"
+"pode拧avanje 拧tampa膷a. Pogledajte odgovaraju膰e poglavlje ''Vodi膷a za\n"
+"po膷etnike'' za vi拧e informacija o pode拧avanju novog 拧tampa膷a. Interfejs\n"
+"koji je tamo prikazan je sli膷an onom koji 膰e biti kori拧ten tokom "
+"instalacije.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"* \"Zvu膷na kartica\": ako je na va拧em sistemu otkrivena zvu膷na kartica, ona "
+"膰e\n"
+"biti prikazana ovdje. Ako primjetite da prikazana zvu膷na kartica nije ona\n"
+"koja je ustvari dio va拧eg sistema, mo啪ete kliknuti na dugme i odabrati neki\n"
+"drugi drajver.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"* \"Grafi膷ki interfejs\": DrakX 膰e podesiti va拧 grafi膷ki interfejs za rad "
+"na\n"
+"rezoluciji \"800x600\" ili \"1024x768\". Ako vam to ne odgovara, kliknite\n"
+"na dugme \"Podesi\" kako biste druga膷ije podesili va拧 interfejs.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"* \"TV kartica\": ako je na va拧em sistemu prepoznata TV kartica, bi膰e\n"
+"prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na\n"
+"dugme \"Podesi\" kako biste poku拧ali podesiti je ru膷no.\n"
"\n"
+"* \"ISDN kartica\": ako je na va拧em sistemu otkrivena ISDN kartica, ona\n"
+"膰e biti prikazana ovdje. Mo啪ete kliknuti na dugme \"Podesi\" da promijenite\n"
+"parametre vezane za nju.\n"
"\n"
-msgstr ""
-"Description:\n"
+"* \"Mre啪a\": ako 啪elite, mo啪ete podesiti va拧 Internet pristup ili pristup\n"
+"lokalnoj mre啪i.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+"* \"Nivo sigurnosti\": ovdje mo啪ete promijeniti nivo sigurnosti sistema "
+"koji\n"
+"je pode拧en ranije.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+"* \"Firewall\": ako planirate povezati va拧 ra膷unar na Internet, pametno je\n"
+"za拧tititi ga od upada postavljanjem firewalla. Pogledajte odgovaraju膰e\n"
+"poglavlje ''Vodi膷a za po膷etnike'' za detalje o pode拧avanju firewalla.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"* \"Bootloader\": ako 啪elite promijeniti postavke bootloadera, kliknite na "
+"to\n"
+"dugme. Ovo bi trebalo biti rezervisano za napredne korisnike.\n"
"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"* \"Servisi\": ovdje mo啪ete fino pode拧avati koji servisi 膰e biti pokrenuti "
+"na\n"
+"va拧em ra膷unaru. Ako planirate koristiti ovaj ra膷unar kao server, dobra je\n"
+"ideja jo拧 jednom pregledati ove postavke."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komori"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Sada 膰emo podesiti konekciju %s.\n"
"\n"
"\n"
+"Pritisnite OK za nastavak."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot mod"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kablovska)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Ne mogu pokrenuti LiLo!\n"
+"Izvr拧ite \"lilo\" kao root u komandnoj liniji da dovr拧ite instalaciju LiLo "
+"teme."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Op拧ti mi拧 sa 3 dugmeta"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+msgid "Select another media to restore from"
+msgstr "Izaberite drugi medij za vra膰anje"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Upravljanje programima"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14354,17 +13757,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"restore description:\n"
@@ -14392,4667 +13797,5329 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
+msgstr "Ponovo po拧alji"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke gre拧ke prilikom slanja poruka mo啪e izazvati \n"
-" lo拧e pode拧en postfix. Ovo mo啪ete rije拧iti tako 拧to 膰ete\n"
-" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD na mjestu - nastavljam."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Vrati"
+msgid "Network & Internet"
+msgstr "Mre啪a i Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Backup-uj sada"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litvanska \"fonetska\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Napredno pode拧avanje"
+msgid "Net Boot Images"
+msgstr "Net Boot Images"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "膶arobnjak za pode拧avanje"
+msgid "Sharing of local scanners"
+msgstr "Dijeljenje lokalnih skenera"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke backupa."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
+"Plug'n'Play probanje nije uspjelo. Molim izaberite odgovaraju膰i monitor"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracijske datoteke"
+msgid "Services and deamons"
+msgstr "Servisi i demoni"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Pode拧avanje Drakbackup-a"
+msgid "Remote host name missing!"
+msgstr "Ime udaljenog ra膷unara nedostaje!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Ukupan napredak"
+msgid "with /usr"
+msgstr "sa /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "艩aljem datoteke..."
+msgid "Network"
+msgstr "Mre啪a"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "slanje datoteka putem FTPa"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Automatski prepoznaj 拧tampa膷e spojene na Microsoft Windows ra膷unare"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Backup ostalih datoteka"
+msgid "This password is too simple"
+msgstr "Ova 拧ifra je previ拧e jednostavna"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Backup korisni膷kih datoteka"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slova膷ka (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Backup sistemskih datoteka"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Pisanje i izmjena programa u raznim jezicima kao 拧to su Perl, Python, C i C+"
+"+ nikad nije bilo lak拧e, zahvaljuju膰i GNU gcc 3 i najboljim Open Source "
+"razvojnim okolinama."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "U izradi ... molim sa膷ekajte."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Nije prona膽ena konfiguraciona datoteka \n"
-"molim kliknite na 膶arobnjak ili Napredno."
+" Prebaci \n"
+"odmah"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Molim izaberite podatke za backup..."
+msgid "Use daemon"
+msgstr "Koristi demon"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Molim izaberite medij za backup..."
+msgid "Authentication"
+msgstr "Autentikacija"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Molim izaberite podatke za vra膰anje..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Dodaj ovaj 拧tampa膷 u Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Sljede膰i paketi trebaju biti instalirani:\n"
+msgid "Additional CUPS servers: "
+msgstr "Dodatni CUP serveri:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Gre拧ka tokom slanja datoteke preko FTPa.\n"
-" Molimo ispravite va拧u FTP konfiguraciju."
+"Izaberite jedan od automatski prepoznatih 拧tampa膷a sa liste ili unesite ime "
+"ra膷unara ili IP i opcionalno broj porta (podrazumjeva se 9100) u polja za "
+"unos."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Gdje 啪elite montirati ure膽aj %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Vrati putem mre啪e"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Al啪ir"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-veli膷ina"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Gre拧ka tokom sendmaila.\n"
-" Va拧 mail izvje拧taj nije poslan.\n"
-" Molim podesite sendmail"
+"U slu膷aju da postoji vi拧e servera za va拧u karticu, sa ili bez 3D\n"
+"ubrzanja, predlo啪en vam je server koji najbolje odgovara va拧im\n"
+"potrebama."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Sljede膰i"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tBackupi koriste tar i gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Prethodni"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Spasi"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation ne postavljaj prvo pitanje u MandrakeUpdate modu\n"
+" --no-verify-rpm ne provjeravaj potpise paketa\n"
+" --changelog-first prika啪i changelog prije filelist u opisnom prozoru\n"
+" --merge-all-rpmnew predlo啪i merge svih prona膽enih .rpmnew/.rpmsave "
+"datoteka"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Izgradi backup"
+msgid "Setting Default Printer..."
+msgstr "Postavljam podrazumjevani 拧tampa膷..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Napredak vra膰anja"
+msgid "Interface %s (using module %s)"
+msgstr "Interfejs %s (koriste膰i modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Vrati iz kataloga"
+msgid "Name: %s\n"
+msgstr "Ime: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Browse to new restore repository."
+msgid "Generating preview ..."
+msgstr "Generi拧em pregled..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD na mjestu - nastavljam."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Frekvencija bi trebala imati zavr拧etak k, M ili G (na primjer, \"2.46G\" za "
+"frekvenciju 2.46 GHz) ili dodajte odgovaraju膰i broj nula (0)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Ru膷no vra膰anje"
+msgid "serial"
+msgstr "serijski"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Vrati sve backupe"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Vra膰anje nije uspjelo..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gruzijska (\"latini膷ni\" izgled)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Vra膰ene datoteke..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Nabavite najbolje proizvode kod strate拧kih partnera Mandrake Linuxa"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Potrebna je staza ili modul"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Sada mo啪ete navesti opcije za modul %s.\n"
+"Obratite pa啪nju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Potrebno ime ra膷unara"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 vam pru啪a Mandrake Kontrolni centar, mo膰an alata koji "
+"potpuno prilago膽uje va拧 ra膷unar namjeni koju ste odredili za njega. Podesite "
+"i prilagodite elemente kao 拧to je nivo sigurnosti,periferni ure膽aji (ekran, "
+"mi拧, tastatura...), Internet konekciju i mnoge druge stvari!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Potrebno korisni膷ko ime"
+msgid "Kenya"
+msgstr "Kenija"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Potrebna 拧ifra"
+msgid "Use ``Unmount'' first"
+msgstr "Najprije koristite ``Demontiraj''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Staza ili modul ra膷unara"
+msgid "Installing mtools packages..."
+msgstr "Instaliram mtools pakete..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Ime ra膷unara"
+msgid "You must specify a root partition"
+msgstr "Morate navesti root particiju"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restore putem mre啪nog protokola: %s"
+msgid "first step creation"
+msgstr "kreiranje prvog koraka"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Vrati putem mre啪e"
+msgid "Both Shift keys simultaneously"
+msgstr "Obje Shift tipke istovremeno"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Neispravna oznaka trake. Oznaka je %s."
+msgid "Select a scanner model"
+msgstr "Izaberite model skenera"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Ubacite traku sa oznakom %s u kasetni\n"
-"ure膽aj %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Vrati sa trake"
+msgid "Drakbackup Configuration"
+msgstr "Pode拧avanje Drakbackup-a"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Neispravna oznaka CDa. Oznaka diska je %s."
+msgid "Save as.."
+msgstr "Sa膷uvaj kao..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Ubacite CD sa oznakom %s u CD\n"
-"jedinicu pod ta膷kom montiranja /mnt/cdrom"
+"Interfejs jo拧 nije pode拧en.\n"
+"Pokrenite 膷arobnjak za pode拧avanje u glavnom prozoru"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Vrati sa CDa"
+msgid "Korea (North)"
+msgstr "Koreja (Sjeverna)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Backup datoteke nisu prona膽ene na %s."
+msgid "Autologin"
+msgstr "Autologin"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Promijeni\n"
-"stazu vra膰anja"
+msgid "System configuration"
+msgstr "Pode拧avanje sistema"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Administratorska 拧ifra domena"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Vrati izabrane\n"
-"datoteke"
+"Prilagodite savr拧eno svoj ra膷unar va拧im potrebama pomo膰u 11 dosupnih "
+"Mandrake Linux korisni膷kih okolina koje se mogu potpuno prilagoditi: KDE "
+"3.1, GNOME 2.2, Window Maker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Pode拧avam 拧tampa膷 ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Vrati izabrane\n"
-"stavke katologa"
+"Da bi se osigurao integritet podataka nakon promjene veli膷ine, \n"
+"prilikom idu膰eg pokretanja Windows(TM) bi膰e izvr拧ena provjera datote膷nog "
+"sistema"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Pobri拧i korisni膷ke direktorije prije vra膰anja."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Izvr拧i novi backup prije vra膰anja (samo za inkrementalni backup.)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "ako je postavljeno na da, izvr拧ava neke provjere rpm baze podataka."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "izaberite stazu za vra膰anje (umjesto / )"
+msgid "Virgin Islands (British)"
+msgstr "Djevi膷anska ostrva (Britanska)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Vrati ostalo"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Vrati korisnike"
+msgid "click here if you are sure."
+msgstr "kliknite ovdje ako ste sigurni."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Vrati sistem"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Nije prona膽ena konfiguraciona datoteka \n"
+"molim kliknite na 膶arobnjak ili Napredno."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Ovdje su navedene Linux particije koje ve膰 postoje na va拧em hard disku.\n"
+"Mo啪ete zadr啪ati izbore koje je napravio 膷arobnjak, po拧to su oni dobri za\n"
+"najve膰i broj instalacija. Ako napravite neke izmjene, morate, ako ni拧ta "
+"drugo,\n"
+"definisati root particiju (\"/\"). Nemojte izabrati premalu particiju ili "
+"ne膰ete\n"
+"mo膰i instalirati dovoljno softvera. Ako 啪elite dr啪ati va拧e podatke na "
+"zasebnoj\n"
+"particiji, trebate tako膽e napraviti \"/home\" particiju (拧to je mogu膰e samo "
+"ako\n"
+"imate vi拧e od jedne Linux particije na raspolaganju).\n"
+"\n"
+"Svaka particija je navedena ovako: \"Ime\", \"Kapacitet\".\n"
+"\n"
+"\"Ime\" se sastoji od: \"vrsta hard diska\", \"broj hard diska\", \"broj\n"
+"particije\" (na primjer, \"hda1\").\n"
+"\n"
+"\n"
+"\"Vrsta hard diska\" je \"hd\" ako je va拧 hard disk IDE, a \"sd\" ako je\n"
+"u pitanju SCSI hard disk.\n"
+"\n"
+"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
+"diskova:\n"
+"\n"
+" * \"a\" zna膷i \"master hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"b\" zna膷i \"slave hard disk na primarnom IDE kontroleru\";\n"
+"\n"
+" * \"c\" zna膷i \"master hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+" * \"d\" zna膷i \"slave hard disk na sekundarnom IDE kontroleru\";\n"
+"\n"
+"Kod SCSI hard diskova, \"a\" je \"disk sa najni啪im SCSI IDom\", \"b\"\n"
+"je \"drugi najni啪i SCSI ID\", itd."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Drugi medij"
+msgid "Remove"
+msgstr "Pobri拧i"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij za vra膰anje"
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Molim unesite direktorij gdje su smje拧teni backupi"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Vrati sa hard diska"
+msgid "Pipe job into a command"
+msgstr "Spoji zadatak na komandu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Koristi quotu za backup datoteke."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "novo dinami膷ko ime ure膽aja koje generi拧e kernelov devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Molim unesite maksimalnu veli膷inu\n"
-" dozvoljenu za Draxbackup"
+msgid "Yes"
+msgstr "Da"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Molimo unesite direktorij za spasiti:"
+msgid "Cote d'Ivoire"
+msgstr "Obala Slonova膷e"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Koristi hard disk za backup"
+msgid "Which protocol do you want to use?"
+msgstr "Koji protokol 啪elite koristiti?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "molim izaberite datum za vra膰anje"
+msgid "Restore Progress"
+msgstr "Napredak vra膰anja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Vrati sistemske datoteke prije:"
+msgid "Estonia"
+msgstr "Estonija"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista korisnika za vra膰anje (samo najsvje啪iji datum po korisniku je zna膷ajan)"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Izaberite ra膷unar kojem treba omogu膰iti pristup lokalnim skenerima:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK za vra膰anje ostalih datoteka."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Imate rupu u va拧oj tabeli particija, ali je ja ne mogu upotrijebiti.\n"
+"Jedino rje拧enje je da pomjerite va拧e primarne particije, kako bi se rupa "
+"na拧la pored extended particija"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Vrati konfiguraciju "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " uspje拧no spa拧eni na %s "
+msgid "Add"
+msgstr "Dodaj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Svi va拧i izabrani podaci su "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Dijeljenje Internet konekcije nije nikad pode拧eno."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Backup datoteke su o拧te膰ene"
+msgid " Error while sending mail. \n"
+msgstr " Gre拧ka tokom slanja po拧te. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Molimo isklju膷ite ili pobri拧ite ga idu膰i put."
+msgid "Keyboard"
+msgstr "Tastatura"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Lista o拧te膰enih podataka:\n"
-"\n"
+"Ubacite CD sa oznakom %s u CD\n"
+"jedinicu pod ta膷kom montiranja /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Lista podataka za vra膰anje:\n"
-"\n"
+"Brzina bi trebala imati zavr拧etak k, M ili G (na primjer, \"11M\" za 11M) "
+"ili dodajte odgovaraju膰i broj nula (0)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez pode拧avanja, molim kliknite na 膶arobnjak ili Napredno.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Izaberite konekciju koju 啪elite podesiti"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Mre啪u preko webdav-a.\n"
+msgid "Please wait, setting security level..."
+msgstr "Molim sa膷ekajre, pode拧avam nivo sigurnosti..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Mre啪u preko rsync-a.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1: vrhunska razvojna platforma"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mre啪u preko SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Pode拧avam mre啪ni ure膽aj %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mre啪u preko FTPa.\n"
+msgid "activated"
+msgstr "aktiviran"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Traka \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Molimo izaberite koji mre啪ni interfejs 啪elite koristiti za spajanje na DHCP "
+"server."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Pronalazim pakete za unaprje膽enje..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
+msgid "Mount point: "
+msgstr "Ta膷ka montiranja: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Demon (%s) uklju膷uje :\n"
+msgid "parse all fonts"
+msgstr "obradi sve fontove"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackupi koriste tar i gzip\n"
+msgid "With X"
+msgstr "Sa X-om"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackupi koriste tar i bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Multi-head konfiguracija"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uklju膷uj sistemske datoteke\n"
+msgid "No browser available! Please install one"
+msgstr "Nemate nijedan browser! Molim instalirajte neki browser"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Zadr啪ati izmjene?\n"
+"Trenutna konfiguracija je:\n"
"\n"
-"- Opcije:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisni膷ko ime: %s\n"
-"\t\t u direktoriju: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Ne mo啪ete koristiti ReiserFS za particije manje od 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Spasi pomo膰u %s na ra膷unaru: %s\n"
+"Rwho protokol omogu膰ava udaljenim korisnicima da dobiju listu svih\n"
+"korisnika prijavljenih na ra膷unar na kojem radi rwho demon (sli膷no fingeru)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tObri拧i=%s"
+msgid "Domain name"
+msgstr "Ime domena"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Spasi na traku na ure膽aju: %s"
+msgid "Sharing of local printers"
+msgstr "Dijeljenje lokalnih 拧tampa膷a"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (vi拧e sesija)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "na ure膽aju: %s"
+msgid "Available printers"
+msgstr "Dostupni 拧tampa膷i"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Prazno"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Pr啪i na CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Obri拧i tar datoteke sa diska nakon backupa.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- spasi na hard disku u direktoriju: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- ostale datoteke:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
-msgstr ""
"\n"
-"- korisni膷ke datoteke:\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "拧irina teksta"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Gdje 啪elite montirati ure膽aj %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Podrazumjevani lease (u sekundama)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Interfejs \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Sa osnovnom dokumentacijom (preporu膷eno)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 dugme"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- sistemske datoteke:\n"
+"Na va拧 sistem je spojeno %d nepoznatih 拧tampa膷a"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Izvori backup-a: \n"
+"Allow/Forbid direct root login."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Ru膷no izaberite korisnika"
+msgid "Korea"
+msgstr "Koreja"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Backup korisnika"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Va拧 izbor? (podrazumjevano '%s' %s)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Backup sistema"
+msgid "Raw printer"
+msgstr "Sirovi 拧tampa膷"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Molim izaberite 拧ta 啪elite backupovati"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Zvani膷no ime proizvo膽a膷a procesora"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "na Kasetnom ure膽aju"
+msgid "Vendor"
+msgstr "Proizvo膽a膷"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "na CDROMu"
+msgid "Interface %s"
+msgstr "Interfejs %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "preko mre啪e"
+msgid "Configure mouse"
+msgstr "Pode拧avanje mi拧a"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "na hard disk"
+msgid "Choose the mount points"
+msgstr "Izaberite ta膷ke montiranja"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Molimo izaberite gdje 啪elite backupovati"
+msgid "OK"
+msgstr "U redu"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Vi拧e opcija"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslavenska (latini膷no)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Kada"
+msgid "Installing"
+msgstr "Instaliram"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Gdje"
+msgid "Launch userdrake"
+msgstr "Pokreni userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "艩ta"
+msgid "Is this an install or an upgrade?"
+msgstr "Da li je ovo instalacija ili unaprje膽enje?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Obri拧i tar datoteke sa diska nakon backupa na drugi medij."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Interna ISDN kartica"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Po拧alji mail izvje拧taj nakon svakog backupa na :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Podijelite va拧e znanje i pomozite izgradnju Linux softvera, pridru啪ite se "
+"diskusijskim grupama na na拧im \"Community\" stranicama."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Molim budite sigurni da je cron demon aktiviran u va拧im servisima. \n"
+"膶estitamo, pode拧avanje mre啪e i interneta je zavr拧eno.\n"
"\n"
-"Obratite pa啪nju da trenutno svi 'net' mediji tako膽e koriste hard disk."
+"Sada 膰e ova konfiguracija biti primjenjena na va拧 sistem.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Molim izaberite medij\n"
-"za backup."
+msgid "\t-Hard drive.\n"
+msgstr "\t-Hard disk.\n"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Izaberite vremenski interval\n"
-"izme膽u svakog backupa"
+"Ovaj korak se aktivira samo ako je na va拧em ra膷unaru prona膽ena postoje膰a\n"
+"GNU/Linux particija.\n"
+"\n"
+"DrakX sada treba znati da li 啪elite izvr拧iti novu instalaciju ili "
+"nadogradnju postoje膰eg\n"
+"Mandrake Linux sistema:\n"
+"\n"
+" * \"Instaliraj\": Naj膷e拧膰e ovo 膰e u potpunosti obrisati stari sistem. Ako "
+"啪elite\n"
+"promijeniti particioniranje starog hard diska ili promijeniti datote膷ni "
+"sistem,\n"
+"trebate koristiti ovu opciju. Ali, ovisno o va拧oj 拧emi particioniranja, "
+"mo啪ete\n"
+"sprije膷iti da neki od va拧ih postoje膰ih podataka budu prepisani.\n"
+"\n"
+" * \"Nadogradi\": Ova vrsta instalacije vam omogu膰uje da updatujete pakete\n"
+"koji su trenutno instalirani na va拧em Mandrake Linux sistemu. Va拧a trenutna\n"
+"拧ema particioniranja i korisni膷ki podaci ne膰e biti izmijenjeni. Ve膰ina "
+"ostalih koraka\n"
+"konfiguracije ostaju kao 拧to jesu, sli膷no obi膷noj instalaciji.\n"
+"\n"
+"Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandrake Linux sistemima "
+"koji\n"
+"koriste verziju \"8.1\" ili kasniju. Obavljanje nadogradnje na ranijim "
+"verzijama\n"
+"Mandrake Linuxa, prije verzije \"8.1\", nije preporu膷eno."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "Koristi demon"
+msgid "Printer on remote CUPS server"
+msgstr "艩tampa膷 na udaljenom CUPS serveru"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
-msgstr "mjese膷no"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Nisam uspio ukloniti 拧tampa膷 \"%s\" iz Star/Open Offica."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr "sedmi膷no"
+msgid "delete"
+msgstr "obri拧i"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
-msgstr "dnevno"
+msgid "here if no."
+msgstr "ovdje ako ne."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "hourly"
-msgstr "svakog sata"
+msgid "DHCP host name"
+msgstr "DHCP ime ra膷unara"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
+msgid "The maximum lease (in seconds)"
+msgstr "Maksimalni lease (u sekundama)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Molimo izaberite na kojem serijskom portu je spojen va拧 mi拧."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Molimo unesite direktorij u koji 啪elite spasiti:"
+msgid "Did it work properly?"
+msgstr "Da li je radilo ispravno?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Molim uklju膷ite ako 啪elite izbaciti traku nakon backupa."
+msgid "Poor"
+msgstr "Lo拧"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Molim uklju膷ite ako 啪elite obrisati traku prije backupa."
+msgid "The DHCP start range"
+msgstr "Po膷etak DHCP raspona"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Molim uklju膷ite ako 啪elite koristiti non-rewinding ure膽aj."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Molim unesite ime ure膽aja kojeg 膰ete koristiti za backup"
+msgid "Unsafe"
+msgstr "Nesigurno"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
+msgid ", %s sectors"
+msgstr ", %s sektora"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Nije definisan CD ure膽aj!"
+msgid "No"
+msgstr "Ne"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Molim unesite naziv ure膽aja va拧eg CD Writera\n"
-" npr: 0,1,0"
+"Da li je va拧 拧tampa膷 multifunkcijski ure膽aj od HPa ili Sony-ja (OfficeJet, "
+"PSC, LaserJet 1100/1200/1220/3200/3300 sa skenerom, Sony IJP-V100), ili HP "
+"PhotoSmart ili HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Molim uklju膷ite ako koristite DVDRAM ure膽aj"
+msgid "Guadeloupe"
+msgstr "Gvadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Molim uklju膷ite ako koristite DVDR ure膽aj"
+msgid "could not find any font.\n"
+msgstr "ne mogu na膰i nijedan font.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid " Erase Now "
-msgstr " Obri拧i odmah "
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "沤elite li da BackSpace vrati Delete u konzoli?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Molim uklju膷ite ako 啪elite obrisati va拧 RW medij (prva sesija)"
+msgid "Vertical refresh rate"
+msgstr "Brzina vertikalnog osvje啪avanja"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Molim uklju膷ite ako koristite CDRW medij"
+msgid "Entering step `%s'\n"
+msgstr "Prelazim na korak `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Molim uklju膷ite ako koristite multisesijski CD"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Molimo izaberite veli膷inu va拧eg CD/DVD medija (Mb)"
+msgid "Removing %s ..."
+msgstr "Uklanjam %s..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Molim izaberite va拧 CD/DVD ure膽aj\n"
-"(Pritisnite Enter za propagaciju postavki na ostala polja. \n"
-"Ovo polje nije obavezno, ono je samo alat za popunjavanje formulara.)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
+msgid "No printer"
+msgstr "Nema 拧tampa膷a"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Potrebno ime ra膷unara, korisni膷ko ime i 拧ifra!"
+msgid "alert configuration"
+msgstr "postavka upozorenja"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Zapamti ovu 拧ifru"
+msgid "NetWare Printer Options"
+msgstr "Opcije NetWare 拧tampa膷a"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please enter your password"
-msgstr "Molimo unesite va拧u 拧ifru"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) pregled"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please enter your login"
-msgstr "Molimo unesite va拧 login"
+msgid "General"
+msgstr "Op膰enito"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Molimo unesite direktorij (ili modul) za\n"
-" smje拧taj backupa na ovom ra膷unaru."
+msgid "Printing system: "
+msgstr "Sistem 拧tampe: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Molimo unesite ime ra膷unara ili IP."
+msgid "Add a user"
+msgstr "Dodajte korisnika"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Drugi (ne drakbackup)\n"
-"klju膷evi su ve膰 na mjestu"
+msgid "Network configuration (%d adapters)"
+msgstr "Pode拧avanje mre啪e (%d adaptera)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "Nedostaje obavezan paket %s"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipini"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Ok"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Naziv reda za 拧tampu"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Da li 啪elite koristiti aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bjeloruska"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Prebaci \n"
-"odmah"
+"PDQ podr啪ava samo lokalne 拧tampa膷e, udaljene LPD 拧tampa膷ei Socket/TCP "
+"拧tampa膷e.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Prebaci datoteke na novu particiju"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Napravi/premjesti\n"
-"backup klju膷eve za SSH"
+"Ovdje dodajte CUPS servere 膷ije 拧tampa膷e 啪elite koristiti. Ovo trebate "
+"raditi samo ako serveri ne broadcast-uju informacije o njihovim 拧tampa膷ima "
+"cijeloj lokalnoj mre啪i."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Koristi Expect za SSH"
+msgid "Restore From Catalog"
+msgstr "Vrati iz kataloga"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Net Method:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Koristi mre啪nu konekciju za backup"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Korisnici"
+msgid "group :"
+msgstr "grupa :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+msgid "Lilo screen"
+msgstr "Lilo ekran"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
+msgid "LILO with graphical menu"
+msgstr "LILO sa grafi膷kim menijem"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Ne uklju膷uj spremnik web preglednika"
+msgid "Estimating"
+msgstr "Procjenjujem"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Molimo izaberite sve korisnike koje 啪elite uklju膷iti u va拧 backup."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Ne mo啪ete isklju膷iti ovaj paket. On je ve膰 instaliran"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom bi膰ete u mogu膰nosti da vratite bilo koju\n"
-" verziju va拧eg /etc direktorija."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", 拧tampa膷 \"%s\" na SMB/Windows serveru \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Zaobi膽i kriti膷ne datoteke (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Svejedno nastavi?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Tra啪im dostupne pakete i izgra膽ujem rpm bazu podataka..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Backup sistemskih datoteka. (/etc direktorij)"
+msgid "Does not appear to be recordable media!"
+msgstr "Izgleda da na ovaj medij nije mogu膰e snimati!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu spasiti ili vratiti sve datoteke u va拧em /etc direktoriju.\n"
+msgid "Specify options"
+msgstr "Navedi opcije"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Vlastita boot disketa vam omogu膰uje da pokrenete Linux pri 膷emu ne ovisite\n"
+"od bootloader programa. Ovo je korisno ako ne 啪elite instalirati SILO na\n"
+"va拧 sistem, ako neki drugi operativni sistem uklanja SILO ili ako SILO ne "
+"radi\n"
+"na va拧oj trenutnoj konfiguraciji. Vlastiti bootdisk se mo啪e tako膽e koristiti "
+"sa\n"
+"Mandrake rescue image, pri 膷emu je mnogo lak拧e ispraviti neke ozbiljne\n"
+"sistemske kvarove.\n"
"\n"
-"Molimo uklju膷ite sve potrebne opcije.\n"
+"Ako 啪elite napraviti boot disketu za va拧 sistem, stavite neku disketu u "
+"va拧u\n"
+"prvu jedinicu i pritisnite \"U redu\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Ne mo啪ete koristiti 拧ifrovani datote膷ni sistem za ta膷ku montiranja %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Izbor datoteka"
+msgid "Norfolk Island"
+msgstr "Norfolk ostrvo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Ne mogu napraviti katalog!"
+msgid "Theme installation failed!"
+msgstr "Instalacija teme nije uspjela!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Gre拧ka tokom slanja po拧te. \n"
+msgid "Nothing to do"
+msgstr "Nemam 拧ta da radim"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem trake:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Koristi za loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem CDa:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake alat za prijavu bugova"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "koristi pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Premje拧tam datoteke na novu particiju"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Napredno"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Prebaci"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (艩vedska)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Problem sa FTP konekcijom: Nije bilo mogu膰e poslati va拧e backup datoteke "
-"putem FTPa.\n"
+msgid "More Options"
+msgstr "Vi拧e opcija"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Obri拧i tar datoteke sa diska nakon backupa na drugi medij."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"lista datoteka poslana putem FTPa: %s\n"
-" "
+"Cron je standardan UNIX program koji periodi膷no pokre膰e programe koje\n"
+"zada korisnik. Vixie cron dodaje ve膰i broj mogu膰nosti osnovnom\n"
+"UNIX cronu, uklju膷uju膰i bolju sigurnost i mo膰nije opcije za pode拧avanje."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Nema izmjena na backupu!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Datoteke backup-a hard diska..."
+msgid "Add Client -->"
+msgstr "Dodaj klijenta -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Backup-uj ostale datoteke..."
+msgid "Read carefully!"
+msgstr "Pro膷itajte pa啪ljivo!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak backup-a hard diska..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Backup-uj korisni膷ke datoteke..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Molim,\n"
+"unesite va拧 tv standard i dr啪avu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Backup-uj sistemske datoteke..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Nema trake u %s!"
+msgid "No (experts only)"
+msgstr "Ne (samo eksperti)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem sa privilegijama tokom pristupa na CD."
+msgid "No kernel selected!"
+msgstr "Nije izabran kernel!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Potrebno je par trenutaka da se obri拧e medij."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Medij nije izbrisiv!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Izgleda da na ovaj medij nije mogu膰e snimati!"
+msgid "The encryption keys do not match"
+msgstr "Klju膷evi enkripcije se ne poklapaju"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Nema CDR/DVDR u drajvu!"
+msgid "Right \"Windows\" key"
+msgstr "Desna \"Windows\" tipka"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV transfer nije uspio!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Udaljeni WebDAV sajt je ve膰 sinhroniziran!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "ako je postavljeno na da, provjerava prazne 拧ifre u /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Ukupno napredak"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Prije nego 拧to nastavimo, trebate pa啪ljivo pro膷itati uvjete licence. Ona\n"
+"pokriva cijelu Mandrake Linux distribuciju. Ako se sla啪ete sa svim\n"
+"uvjetima u njoj, kliknite na dugme \"Prihvati\". Ako ne, samo ugasite\n"
+"va拧 ra膷unar."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Transfer uspje拧an\n"
-"Mo啪da je potrebno da provjerite da li se mo啪ete prijaviti na server sa:\n"
+"Ovo je lista mogu膰ih opcija za 拧tampu za trenutni 拧tampa膷:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Rezolucije"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"bez pitanja o 拧ifri."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"drakfirewall pode拧ava膷\n"
+"\n"
+"On pode拧ava li膷ni firewall za ovaj Mandrake Linux ra膷unar.\n"
+"Za mo膰nu soluciju posebnog firewalla, molimo pogledajte\n"
+"specijaliziranu MandrakeSecurity Firewall distribuciju."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s ne odgovara"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Molim unesite va拧e korisni膷ko ime, 拧ifru i domen da biste pristupili ovom "
+"ra膷unaru."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Ne mogu prona膰i %s na %s"
+msgid "Remove selected host"
+msgstr "Ukloni izabrani ra膷unar"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Pristup odbijen pri prenosu %s na %s"
+msgid "Network configuration"
+msgstr "Pode拧avanje mre啪e"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Pogre拧na 拧ifra na %s"
+msgid "No sharing"
+msgstr "Bez dijeljenja"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Nema upita za 拧ifru na %s na portu %s"
+msgid "Move selected rule down one level"
+msgstr "Pomjeri izabrano pravilo dole za jedan nivo"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "GRE艩KA: Ne mogu pokrenuti %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Mo啪da 膰e trebati par trenutaka da se generi拧u klju膷evi."
+msgid "Please check if you are using a DVDR device"
+msgstr "Molim uklju膷ite ako koristite DVDR ure膽aj"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s ve膰 postoji, da ga obri拧em?\n"
-"\n"
-"Upozorenje: Ako ste ve膰 jednom obavili ovaj proces, vjerovatno\n"
-"trebate o膷istiti unos iz liste autoriziranih klju膷eva na serveru."
+msgid "FATAL"
+msgstr "FATALNO"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP server omogu膰uje pokretanje drugih ra膷unara koriste膰i PXE u zadatom "
+"rasponu adresa.\n"
"\n"
-" DrakBackup Detalji izvje拧taja\n"
-"\n"
+"Mre啪na adresa je %s koriste膰i netmasku %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Obri拧i"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Izvje拧taj o demonima\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup Izvje拧taj \n"
-"\n"
+"Mogu podesiti va拧 ra膷unar da automatski pokrene grafi膷ki interfejs (XFree) "
+"pri pokretanju ra膷unara.\n"
+"沤elite li da se XFree automatski pokre膰e?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Napravi disk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATALNO"
+msgid "Disconnect %s"
+msgstr "Prekini konekciju na %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "UPOZORENJE"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Kron jo拧 uvijek nije dostupan kao ne-root"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %sa nije uspjela. Javila se sljede膰a gre拧ka:"
+msgid "SSH Server"
+msgstr "SSH server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ne, ne 啪elim da se autologiram"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Mre啪u preko rsync-a.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, 啪elim da se autologiram sa ovim (korisnik, desktop)"
+msgid "European protocol"
+msgstr "Evropski protokol"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Pokreni X-Window sistem na startu"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", 拧tampa膷 \"%s\" na serveru \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Sistem mod"
+msgid "Error"
+msgstr "Gre拧ka"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Boot ekran"
+msgid "allow \"su\""
+msgstr "dozvoli \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo ekran"
+msgid "Australia"
+msgstr "Australija"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Izaberite temu za\n"
-"lilo i boot ekran,\n"
-"mo啪ete ih odvojeno\n"
-"izabrati"
+msgid "please wait during ttmkfdir..."
+msgstr "molimo sa膷ekajte tokom ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Teme"
+msgid "Configure only card \"%s\"%s"
+msgstr "Podesi samo karticu \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Izbor splash-a"
+msgid "Level"
+msgstr "Nivo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao boot manager.\n"
-"Kliknite na Konfiguri拧i kako bi se pokrenuo 膷arobnjak za pode拧avanje."
+msgid "Change the printing system"
+msgstr "Promijenite sistem 拧tampe"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Uspje拧na instalacija LiLo i Boot tema"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Va拧 sistem podr啪ava konfiguraciju vi拧e glava.\n"
+"艩ta 啪elite u膷initi?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Instalacija teme nije uspjela!"
+msgid "Configure services"
+msgstr "Pode拧avanje servisa"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Napomena"
+msgid "Broadcast Address:"
+msgstr "Broadcast adresa:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Pokre膰em 'lilo'"
+msgid "mount failed: "
+msgstr "montiranje nije uspjelo: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Ne mogu pokrenuti LiLo!\n"
-"Izvr拧ite \"lilo\" kao root u komandnoj liniji da dovr拧ite instalaciju LiLo "
-"teme."
+"Linux kernel mora izvr拧iti prora膷unsku petlju prilikom boot-a kako bi "
+"inicijalizirao tajmer. Rezultat rada te petlje se prikazuje u vidu "
+"bogomipsa, kao jedan neprecizan pokazatelj brzine CPUa."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Image"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Ne mogu izvr拧iti mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Nisam uspio dodati 拧tampa膷 \"%s\" u Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Udaljena administracija"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Ne mogu pisati u /etc/sysconfig/bootsplash\n"
-"Datoteka nije prona膽ena."
+"PCMCIA podr拧ka za 2.2 kernele vi拧e ne postoji. Molim koristite 2.4 kernel."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Zapi拧i %s"
+msgid "Selected All"
+msgstr "Sve izabrano"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Ne mogu pisati u /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Nisam prona拧ao Lilo poruku."
+msgid "Webmin Service"
+msgstr "Webmin servis"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiraj %s u %s"
+msgid "device"
+msgstr "ure膽aj"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Backupujem %s u %s.old"
+msgid "All"
+msgstr "Svi"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Napravi novu temu"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Koji sistem 拧tampanja (spooler) 啪elite koristiti?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Tema prikaza\n"
-"pod konzolom"
+msgid "Greece"
+msgstr "Gr膷ka"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Instaliraj teme"
+msgid "An error occurred"
+msgstr "Do拧lo je do gre拧ke"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Ovaj paket mora biti unaprije膽en\n"
+"Jeste li sigurni da ga 啪elite isklju膷iti?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamilska (pisa膰a ma拧ina)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "ru膷no"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
+msgid "Printer manufacturer, model, driver"
+msgstr "Proizvo膽a膷 拧tampa膷a, model, drajver"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Datoteka"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Nema medija ili je zabranjeno pisanje na medij za ure膽aj %s.\n"
+"Molim ubacite neki medij."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Direktorij %s ve膰 sadr啪i neke podatke\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Nemate nijedan browser! Molim instalirajte neki browser"
+msgid "Printer on NetWare server"
+msgstr "艩tampa膷 na NetWare serveru"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "spajam se na Bugzilla 膷arobnjak..."
+msgid "Give the ram size in MB"
+msgstr "Navedite veli膷inu rama u MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Paket nije instaliran"
+msgid "Real name"
+msgstr "Pravo ime"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Nije instaliran"
+msgid "done"
+msgstr "gotovo"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Samostalni alati"
+msgid "Please uncheck or remove it on next time."
+msgstr "Molimo isklju膷ite ili pobri拧ite ga idu膰i put."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Izvje拧taj"
+msgid "Higher"
+msgstr "Vi拧i"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Izaberite particije koje 啪elite formatirati"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Na va拧em ra膷unaru nije detektovana TV kartica. Molim provjerite da li je "
+"ispravno priklju膷ena Video/TV kartica koja je podr啪ana pod Linuxom.\n"
"\n"
"\n"
-"Da prijavite bug, kliknite na dugme Prijavi.\n"
-"Ovo 膰e otvoriti prozor web browsera na https://drakbug.mandrakesoft.com\n"
-" gdje 膰ete prona膰i formular koji treba popuniti. Gore prikazane informacije "
-"膰e biti \n"
-"poslane na taj server\n"
+"Mo啪ete posjetiti na拧u bazu hardvera na:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Izdanje:"
+msgid "Can't find %s on %s"
+msgstr "Ne mogu prona膰i %s na %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
+msgid "Japanese 106 keys"
+msgstr "Japanska 106 tipki"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paket:"
+msgid "This will take a few minutes."
+msgstr "Ovo 膰e potrajati par minuta."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplikacija:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "膶arobnjaci za pode拧avanje"
+msgid "Use scanners on remote computers"
+msgstr "Koristi skenere na udaljenim ra膷unarima"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Obri拧i izabrano pravilo"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Alat za Windows migraciju"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Pristupam 拧tampa膷ima na udaljenim CUPS serverima"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Ubacite disketu u %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Upravljanje programima"
+msgid "Maldives"
+msgstr "Maldivi"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Udaljena kontrola"
+msgid "compact"
+msgstr "kompaktno"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuta"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "na kanalu %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", vi拧enamjenski ure膽aj"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Alat za sinhroniziranje"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Ne postoji nijedna FAT particija za promjenu veli膷ine (ili nije ostalo "
+"dovoljno prostora)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "膶arobnjak za prvo pokretanje"
+msgid "Up"
+msgstr "Gore"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolni centar"
+msgid "Firewall"
+msgstr "Firewall"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake alat za prijavu bugova"
+msgid "Area:"
+msgstr "Oblast :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametri"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontroleri"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Pode拧avanje Internet konekcije"
+msgid "Printer Server"
+msgstr "Printer Server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP klijent"
+msgid "Disconnection from the Internet complete."
+msgstr "Prekid veze sa Internetom zavr拧en."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
+msgid "Custom configuration"
+msgstr "Vlastita konfiguracija"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Molim navedite gdje se nalazi instalaciona slika.\n"
+"\n"
+"Ako nemate postoje膰i direktorij, molim kopirajte sadr啪aj CDa ili DVDa.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Tip konekcije: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre and Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Pode拧avanje Internet konekcije"
+msgid "saving Bootsplash theme..."
+msgstr "snimam Bootsplash temu..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijednu Internet konekciju.\n"
-"Napravite jednu klikaju膰i na 'Podesi'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfejs jo拧 nije pode拧en.\n"
-"Pokrenite 膷arobnjak za pode拧avanje u glavnom prozoru"
+msgid "Do you have another one?"
+msgstr "Imate li neki drugi?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "pokreni sada"
+msgid ", printing to %s"
+msgstr ", 拧tampa u %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "zaustavi sada"
+msgid "Assign host name from DHCP address"
+msgstr "Odredi ime ra膷unara iz DHCP adrese"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP klijent"
+msgid "Toggle to normal mode"
+msgstr "Prebaci u normalni mod"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
+msgid "Generic"
+msgstr "Op拧ti"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Boot protokol"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindar %d do %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "New profile..."
+msgstr "Novi profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Pode拧avanje LANa"
+msgid "Which disk do you want to move it to?"
+msgstr "Na koji disk je 啪elite premjestiti?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Pode拧avanje LANa"
+msgid "Display logo on Console"
+msgstr "Prika啪i logo na konzoli"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan pode拧en interfejs.\n"
-"Podesite ih prvo klikaju膰i na 'Podesi'"
+msgid "Windows Domain"
+msgstr "Windows domena"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Konektuj se..."
+msgid "Interface %s (on network %s)"
+msgstr "Interfejs %s (na mre啪i %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Nije konektovan"
+msgid "Wallis and Futuna"
+msgstr "Wallis i Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Konektovan"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Najprije treba napraviti /etc/dhcpd.conf !"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Da li postoji FPU"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Nisam prona拧ao nijedan skener na va拧em sistemu.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, mo啪da preko va拧e mre啪e"
+"Nema dodatnih informacija\n"
+"o ovom servisu, 啪alim."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Interfejs:"
+msgid "Build Single NIC -->"
+msgstr "Izgradi jedan NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Da li je ovo ispravno?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Primjeni"
+msgid "Marshall Islands"
+msgstr "Mar拧alova ostrva"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovdje za pokretanje 膷arobnjaka ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "膶arobnjak..."
+msgid "Root password"
+msgstr "Root 拧ifra"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Build All Kernels -->"
+msgstr "Izgradi sve kernele -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tip:"
+msgid "if set to yes, report unowned files."
+msgstr "ako je postavljeno na da, prijavljuje datoteke bez vlasnika."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Pristup Internetu"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Nemate nijednu swap particiju\n"
+"\n"
+"Svejedno nastavi?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Hostname: "
+msgid "Server IP missing!"
+msgstr "Nedostaje IP adresa servera!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mre啪u..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Enable ACPI"
+msgstr "Uklju膷i ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Drajver"
+msgid "Graphical Environment"
+msgstr "Grafi膷ko okru啪enje"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interfejs"
+msgid "on Tape Device"
+msgstr "na Kasetnom ure膽aju"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
+msgid "Do nothing"
+msgstr "Nemoj raditi ni拧ta"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Molim sa膷ekajte"
+msgid "Delete Client"
+msgstr "Obri拧i klijent"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naziv profila koji 膰e biti kreiran (novi profil je kreiran kao kopija "
-"postoje膰eg) :"
+msgid "Filesystem type: "
+msgstr "Tip datote膷nog sistema: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Novi profil..."
+msgid "Starting network..."
+msgstr "Pokre膰em mre啪u..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
+msgid "Vietnam"
+msgstr "Vijetnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Bri拧i profil..."
+msgid "/_Fields description"
+msgstr "/_Opis polja"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Pode拧avanje mre啪e (%d adaptera)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimizirajte va拧u sigurnost koriste膰i Mandrake Linux"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 Display Manager vam omogu膰uje da se grafi膷ki\n"
-"prijavite na va拧 sistem uz pokretanje X Window Systema, a podr啪ava i\n"
-"nekoliko razli膷itih X sesija na va拧em lokalnom ra膷unaru u isto vrijeme."
+msgid "Help"
+msgstr "Pomo膰"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Izbor display managera"
+msgid "Your personal phone number"
+msgstr "Va拧 li膷ni broj telefona"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Koju veli膷inu 啪elite da sa膷uvate za Windows na"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Testna stranica je poslana 拧tampa膷u.\n"
+"Mo啪e potrajati odre膽eno vrijeme dok 拧tampa膷 krene.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne mogu izvrsiti fork: %s"
+msgid "Username required"
+msgstr "Potrebno korisni膷ko ime"
-#: ../../standalone/drakfloppy:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Nema medija ili je zabranjeno pisanje na medij za ure膽aj %s.\n"
-"Molim ubacite neki medij."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Provjeri da li je medij prisutan za ovaj uredjaj %s"
+"Ovisno o osnovnom jeziku koji izaberete u Sekciji \"Jezik\", DrakX 膰e\n"
+"automatski izabrati odre膽eni tip tastature. Ipak, mo啪da nemate tastaturu\n"
+"koja ta膷no odgovara va拧em jeziku: npr. ako ste 艩vajcarac koji govori\n"
+"engleski, mo啪da imate 拧vajcarsku tastaturu. Ili ako govorite engleski ali\n"
+"se nalazite u Kvibeku, mo啪da 膰ete se na膰i u situaciji gdje se va拧 jezik i\n"
+"tastatura ne poklapaju. U svakom slu膷aju, ovaj korak instalacije vam\n"
+"omogu膰ava da izaberete odgovaraju膰u tastaturu sa liste.\n"
+"\n"
+"Kliknite na dugme \"Vi拧e\" kako bi vam bila predstavljena potpuna lista\n"
+"podr啪anih tastatura.\n"
+"\n"
+"Ako izaberete raspored tipaka koji je baziran na ne-latini膷noj abecedi,\n"
+"sljede膰i dijalog 膰e vam ponuditi da izaberete tipke pomo膰u kojih mo啪ete\n"
+"prebaciti tastaturu izme膽u latini膷nog i ne-latini膷nog rasporeda."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Napravi disk"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opcije SMB (Windows 9x/NT) 拧tampa膷a"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Ispis"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Ukloni modul"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd opcionalni argumenti"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Dodaj modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Surfajte koriste膰i Mozillu ili Konqueror, 膷itajte va拧u po拧tu sa Evolution "
+"ili KMail, pravite va拧e dokumente sa OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "izostavi scsi module"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol za ostatak svijeta"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "ako je potrebno"
+msgid "Print test pages"
+msgstr "艩tampaj testnu stranicu"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "izostavi raid module"
+msgid "64 MB or more"
+msgstr "64 MB ili vi拧e"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "prisili"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Molimo izaberite testne stranice koje 膰ete 拧tampati.\n"
+"Pa啪nja: foto testna stranica mo啪e tra啪iti dosta vremena za 拧tampu a na "
+"laserskim 拧tampa膷ima sa malo memorije mo啪da ne膰e nikad ni iza膰i. U ve膰ini "
+"slu膷ajeva dovoljno je od拧tampati standardnu testnu stranicu."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd opcionalni argumenti"
+msgid "Please select the device where your %s is attached"
+msgstr "Molim izaberite ure膽aj gdje je priklju膷en va拧 %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Ekspert podru膷je"
+msgid "Not formatted\n"
+msgstr "Nije formatirana\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "Kernel verzija"
+msgid "Periodic Checks"
+msgstr "Periodi膷ne provjere"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "Podrazumijevano"
+msgid "PXE Server Configuration"
+msgstr "Pode拧avanje PXE servera"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Op膰enito"
+msgid "Backup the system files before:"
+msgstr "Vrati sistemske datoteke prije:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Kreiranje boot diskete"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ovo je standardna sigurnost koja je preporu膷ena za ra膷unar koji 膰e biti "
+"kori拧ten za spajanje na Internet kao klijent."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Prva disketna jedinica"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Veli膷ina"
+msgid "/File/_Quit"
+msgstr "/Datoteka/_Izlaz"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Naziv modula"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post Uninstall"
+msgid "Choose the new size"
+msgstr "Izaberite novu veli膷inu"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Pobri拧i fontove sa mog sistema"
+msgid "Media class"
+msgstr "Klasa medija"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Probni inicijali"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Ova verzija Scannerdrake programa ne poznaje %s."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Post Install"
+msgid "Faroe Islands"
+msgstr "Farska ostrva"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i konvertuj fontove"
+msgid "Restart XFS"
+msgstr "Restartuj XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na sistem"
+msgid "Add host/network"
+msgstr "Dodaj ra膷unar/mre啪u"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Pobri拧i listu"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"ako je postavljeno na da, provjerava prazne 拧ifre, nedostatak 拧ifre u /etc/"
+"shadow i korisnike sa id-om 0 koji nisu root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Sve izabrano"
+msgid "Please enter the directory to save to:"
+msgstr "Molimo unesite direktorij u koji 啪elite spasiti:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Ni拧ta izabrano"
+msgid "Model name"
+msgstr "Naziv modela"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "ovdje ako ne."
+msgid "Albania"
+msgstr "Albanija"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "kliknite ovdje ako ste sigurni."
+msgid "No CDR/DVDR in drive!"
+msgstr "Nema CDR/DVDR u drajvu!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Lista instalacije"
+msgid "British Indian Ocean Territory"
+msgstr "Britansko-Indijska morska teritorija"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
+msgid "Normal Mode"
+msgstr "Normalni mod"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
-"instalirate na va[em sistemu.\n"
+"Molim budite sigurni da je cron demon aktiviran u va拧im servisima. \n"
"\n"
-"-Mo啪ete instalirati fontove koriste膰i uobi膷ajen na膷in. U rijetkim "
-"slu膷ajevima, neispravni fontovi mogu zaglaviti va拧 X Server."
+"Obratite pa啪nju da trenutno svi 'net' mediji tako膽e koriste hard disk."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Razni 拧tampa膷i"
+msgid "Printer connection type"
+msgstr "Tip konekcije 拧tampa膷a"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Nema mre啪nog adaptera na va拧em sistemu!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Mre啪a %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Izaberite aplikacije koje 膰e podr啪avati fontove :"
+msgid "Option %s out of range!"
+msgstr "Opcija %s izvan raspona!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Hvala:\n"
-" - pfm2afm: \n"
-"\t autor: Ken Borgendale:\n"
-"\t Konvertuje Windows .pfm datoteke u .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t autor: James Macnicol: \n"
-"\t Generi拧e datoteke fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t autor: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Konvertuje ttf font datoteke u afm i pfb fontove\n"
+msgid "Connect %s"
+msgstr "Konektuj se na %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "O programu"
+msgid "Restarting CUPS..."
+msgstr "Restartujem CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Lista fontova"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "艩tampam/skeniram/foto kartica na \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Napredne opcije"
+msgid "Duplicate mount point %s"
+msgstr "Dvostruka ta膷ka montiranja %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "ako je postavljeno na da, izvr拧ava chkrootkit provjere."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Preuzmi fontove iz Windowsa"
+msgid "Connection Configuration"
+msgstr "Pode拧avanje konekcije"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Uvoz fontova"
+msgid "Unknown|Generic"
+msgstr "Nepoznat|Op拧ti"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Prilikom instalacije Mandrake Linuxa, mogu膰e je da su neki paketi\n"
+"a啪urirani od zadnjeg izdanja. Mogu膰e je da su ispravljeni bugovi ili\n"
+"rje拧ena neka sigurnosna pitanja. Ako 啪elite iskoristiti ova unaprje膽enja,\n"
+"mo啪ete ih sada dobaviti sa Interneta. Izaberite \"Da\" ako imate ispravnu\n"
+"Internet vezu, ili \"Ne\" ako 膰ete radije instalirati a啪urirane pakete\n"
+"kasnije.\n"
+"\n"
+"Ako izaberete \"Da\" dobi膰ete listu mjesta sa kojih se mogu skinuti\n"
+"novi paketi. Izaberite ono najbli啪e vama. Pojavi膰e se stablo za izbor\n"
+"paketa: pregledajte izabrano i pritisnite \"Instaliraj\" da dobavite i\n"
+"instalirate izabrane pakete, ili \"Odustani\" za prekid."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "gotovo"
+msgid "Quit"
+msgstr "Izlaz"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "restart xfs-a"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Onemogu膰i datoteke fontova"
+msgid "Auto allocate"
+msgstr "Auto alokacija"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
+msgid "Check bad blocks?"
+msgstr "Provjeri lo拧e blokove?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Onemogu膰i privremene datoteke"
+msgid "Other MultiMedia devices"
+msgstr "Drugi multimedijalni ure膽aj"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "type1inst kreiranje"
+msgid "No remote machines"
+msgstr "Nema udaljenih ra膷unara"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm fonts konverzija"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Dobro do拧li u 膶arobnjak za pode拧avanje 拧tampa膷a\n"
+"\n"
+"Ovaj 膷arobnjak 膰e vam pomo膰i da instalirate 拧tampa膷e spojene na ovaj "
+"ra膷unar.\n"
+"\n"
+"Ako imate 拧tampa膷 spojen na ovaj ra膷unar, molim priklju膷ite ga na ra膷unar i "
+"upalite ga kako bi bio auto-prepoznat.\n"
+"\n"
+"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne 啪elite "
+"podesiti 拧tampa膷 sada."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf fonts konverzija"
+msgid "Authentication NIS"
+msgstr "Autentifikacija NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Opcija ``Ograni膷i opcije komandne linije'' je beskorisna bez 拧ifre"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konverzija fontova"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "Zavr拧ena True Type instalacija"
+msgid "Card IO_0"
+msgstr "IO_0 kartice"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "molimo sa膷ekajte tokom ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "Ujedinjeni Arapski Emirati"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
+msgid "Card IO_1"
+msgstr "IO_1 kartice"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
+msgid "Thailand"
+msgstr "Tajland"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Pretra啪i fontove na listi instaliranih"
+msgid "Routers:"
+msgstr "Routeri:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "ne mogu na膰i nijedan font.\n"
+msgid "Kazakhstan"
+msgstr "Kazahstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ponovo izaberi ispravne fontove"
+msgid "Display all available remote CUPS printers"
+msgstr "Prika啪i sve dostupne CUPS 拧tampa膷e"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "ne mogu na膰i nijedan font na montiranim particijama"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux instalacija %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "nije prona膽en nijedan font"
+msgid "Thai keyboard"
+msgstr "Tajlandska tastatura"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "obradi sve fontove"
+msgid "Dialup options"
+msgstr "Opcije dialupa"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Isklju膷i instalirane fontove"
+msgid "Bouvet Island"
+msgstr "Ostrvo Bouvet"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Pretra啪i instalirane fontove"
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Ako nije naveden port, podrazumijeva膰e se 631."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Dobrodo拧li u alat za Dijeljenje Internet konekcije!\n"
-"\n"
-"%s\n"
+"Promijenite va拧 CD-ROM!\n"
"\n"
-"Kliknite na Podesi da pokrenete 膷arobnjak."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Pode拧avanje dijeljenja Internet konekcije"
+"Molimo ubacite CD ozna膷en sa \"%s\" u va拧 CD-ROM ure膽aj i pritisnite \"U redu"
+"\" kad ste spremni.\n"
+"Ako ga nemate, pritisnite \"Odustani\" da biste presko膷ili instalaciju sa "
+"tog CD-ROMa."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje Internet konekcije nije nikad pode拧eno."
+msgid "Polish"
+msgstr "Poljska"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Pode拧avanje je ve膰 zavr拧eno i trenutno je uklju膷eno."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Pode拧avanje je ve膰 zavr拧eno, ali je trenutno isklju膷eno."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Mre啪u preko webdav-a.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Sve je konfigurisano.\n"
-"Sada mo啪ete dijeliti Internet konekciju sa ostalim ra膷unarima na va拧oj "
-"lokalnoj mre啪i, koriste膰i automatsku mre啪nu konfiguraciju (DHCP)."
+"Na va拧em sistemu nije prona膽en nijedan ethernet mre啪ni adapter. Molimo "
+"pokrenite alat za pode拧avanje hardware-a."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Pode拧avam skripte, instaliram software, pokre膰em servere..."
+msgid "No hard drives found"
+msgstr "Nije prona膽en nijedan hard disk"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Pode拧avam..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa prona膽en u trenutnoj konfiguraciji %s!\n"
+msgid "2 buttons"
+msgstr "2 dugmeta"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mre啪a se ne zavr拧ava sa `.0', izlazim."
+msgid "What kind is your ISDN connection?"
+msgstr "Koje je vrste va拧a ISDN konekcija?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ponovo podesi interfejs i DHCP server"
+msgid "Label"
+msgstr "Oznaka"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimalni lease (u sekundama)"
+msgid "Save on floppy"
+msgstr "Spasi na disketu"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Podrazumjevani lease (u sekundama)"
+msgid "Printer auto-detection"
+msgstr "Auto prepoznavanje 拧tampa膷a"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Kraj DHCP raspona"
+msgid "Which of the following is your ISDN card?"
+msgstr "Koja od navedenih je va拧a ISDN kartica?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Po膷etak DHCP raspona"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mre啪a.\n"
+"Ovaj servis omogu膰uje funkcionalnost NFS servera, kojeg pode拧avate\n"
+"putem /etc/exports datoteke."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Interno domensko ime"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "IP adresa DNS servera"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Primjetite, label je promijenjena:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP adresa (ovog) DHCP servera"
+msgid "Number of capture buffers:"
+msgstr "Broj capture buffera:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Va拧 izbor? (0/1, podrazumjevano %s)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Pode拧avanje DHCP servera.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Ovdje mo啪ete izabrati razli膷ite opcije za pode拧avanje DHCP servera.\n"
-"Ako ne znate zna膷enje neke opcije, jednostavno je ostavite kako jeste.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Lokalna mre啪na adresa"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Mogu zadr啪ati trenutnu konfiguraciju i pretpostaviti da ste ve膰 podesili "
-"DHCP server; u tom slu膷aju molim provjerite da li sam ispravno pro膷itao "
-"Mre啪nu adresu koju 膰ete koristiti na lokalnoj mre啪i; ne膰u je ponovo podesiti "
-"i ne膰u mijenjati va拧e postavke DHCP servera.\n"
+"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
+"mogle koristiti (formatiranje zna膷i kreiranje datote膷nog sistema). \n"
"\n"
-"Predlo啪ena DNS postavka je Caching nameserver koji je pode拧en na firewallu. "
-"Mo啪ete je zamijeniti npr. IP adresom DNS servera va拧eg ISPa.\n"
-"\t\t \n"
-"Ako ne, mogu ponovo podesiti va拧 interfejs i podesiti DHCP server za vas.\n"
+"U ovom trenutku mo啪da 膰ete po啪eljeti da reformatirate neke ve膰 postoje膰e\n"
+"particije kako biste pobrisali podatke koje sadr啪e. Ako 啪elite to u膷initi, "
+"molim\n"
+"tako膽e izaberite i te particije.\n"
+"\n"
+"Molim obratite pa啪nju da nije neophodno formatirati sve postoje膰e "
+"particije.\n"
+"Morate reformatirati particije koje sadr啪e operativni sistem (kao 拧to su\n"
+"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
+"sadr啪e\n"
+"podatke koje 啪elite zadr啪ati (tipi膷no /home).\n"
"\n"
+"Molimo da pa啪ljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
+"odabranim particijama 膰e biti pobrisani i ne膰ete biti u mogu膰nosti da ih\n"
+"povratite.\n"
+"\n"
+"Kliknite na \"Dalje ->\" kada budete spremni za formatiranje particija.\n"
+"\n"
+"Kliknite na \"<- Nazad\" ako 啪elite da izaberete druge particije za "
+"instalaciju\n"
+"va拧eg novog Linux-Mandrake operativnog sistema.\n"
+"\n"
+"Kliknite na \"Napredno\" da izaberete particije koje 啪elite provjeriti radi\n"
+"lo拧ih blokova."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francuska"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "膶e拧ka (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Hardversko probanje u toku"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Mre啪ni ure膽aj"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Ukratko"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Trenutna konfiguracija `%s':\n"
-"\n"
-"Mre啪a: %s\n"
-"IP adresa: %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
+" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
+"LPT2:, ..., prvi USB 拧tampa膷: /dev/usb/lp0, drugi USB 拧tampa膷: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Postavke trenutnog interfejsa"
+msgid "Next"
+msgstr "Sljede膰i"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Prika啪i postavke trenutnog interfejsa"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Ne mo啪ete instalirati bootloader na %s particiju\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ne (samo eksperti)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatsko ponovno pode拧avanje"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Upozorenje, mre啪ni adapter (%s) je ve膰 pode拧en.\n"
"\n"
-"Da li 啪elite automatsko ponovno pode拧avanje?\n"
+"Dobro do拧li.\n"
"\n"
-"To mo啪ete obaviti ru膷no, ali morate znati 拧ta radite."
+"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Mre啪ni interfejs je ve膰 pode拧en"
+msgid "Puerto Rico"
+msgstr "Portoriko"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Molimo izaberite koji mre啪ni adapter 膰e biti spojen na va拧u Lokalnu mre啪u."
+"za dovr拧avanje pode拧avanja potreban je paket 'ImageMagick'.\n"
+"Kliknite na \"U redu\" da instalirate 'ImageMagick' ili \"Odustani\" za izlaz"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litvanska \"red brojeva\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Trenutno je samo jedan mre啪ni adapter pode拧en na va拧em sistemu:\n"
+"Da bi se omogu膰ilo unaprje膽enje va拧eg sistema, bi膰e uklonjeni sljede膰i "
+"paketi: %s\n"
"\n"
-"%s\n"
"\n"
-"Sada 膰u podesiti va拧u Lokalnu mre啪u sa ovim adapterom."
+"沤elite li zaista deinstalirati ove pakete?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Mre啪ni interface"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na va拧em sistemu nije prona膽en nijedan ethernet mre啪ni adapter. Molimo "
-"pokrenite alat za pode拧avanje hardware-a."
+msgid "NIS Domain"
+msgstr "NIS domen"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Nema mre啪nog adaptera na va拧em sistemu!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- korisni膷ke datoteke:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
+msgid "Antarctica"
+msgstr "Antarktik"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koriste膰i modul %s)"
+msgid "Mount options"
+msgstr "Opcije montiranja"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Mre啪ni ure膽aj"
+msgid "Jamaica"
+msgstr "Jamajka"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Molim unesite naziv interfejsa spojenog na Internet.\n"
-"\n"
-"Primjeri:\n"
-"\t\tppp+ za modemsku ili DSL konekciju, \n"
-"\t\teth0, ili eth1 za mre啪nu konekciju, \n"
-"\t\tippp+ za isdn konekciju.\n"
+"Dodjeljuje raw ure膽aje blokovskim ure膽ajima (kao 拧to su\n"
+"particije hard diska), za potrebu aplikacija kao 拧to je Oracle ili DVD "
+"playeri"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Sada 膰ete konfigurisati va拧 ra膷unar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali ra膷unari na va拧oj lokalnoj mre啪i 膰e mo膰i koristiti "
-"Internet konekciju ovog ra膷unara. \n"
-"\n"
-"Prije nego 拧to nastavite, provjerite da li ste podesili va拧 mre啪ni/internet "
-"pristup koriste膰i drakconnect.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Napomena: potreban vam je poseban Mre啪ni adapter da biste podesili Lokalnu "
-"mre啪u (LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
+msgid "Please wait, preparing installation..."
+msgstr "Molim sa膷ekajte, pripremam instalaciju..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uklju膷eno."
+msgid "Czech (QWERTZ)"
+msgstr "膶e拧ka (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Uklju膷ujem servere..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Otkrij id mre啪ne karte (korisno za laptope)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "otka啪i"
+msgid "The port number should be an integer!"
+msgstr "Broj porta treba biti cijeli broj!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "rekonfiguri拧i"
+msgid "You must choose an image file first!"
+msgstr "Morate izabrati image datoteku!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "uklju膷i"
+msgid "Restore from Hard Disk."
+msgstr "Vrati sa hard diska"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je ve膰 pode拧eno. Trenutno je\n"
-"neaktivno (isklju膷eno).\n"
-"\n"
-"艩ta 啪elite uraditi?"
+msgid "Add to LVM"
+msgstr "Dodaj na LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
+msgid "DNS server"
+msgstr "DNS server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isklju膷eno."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad i Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Isklju膷ujem servere..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD i LPRng ne podr啪avaju IPP 拧tampa膷e.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "isklju膷i"
+msgid "simple"
+msgstr "jednostavno"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je ve膰 pode拧eno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"艩ta 啪elite uraditi?"
+msgid "Clear all"
+msgstr "Obri拧i sve"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
+msgid "No test pages"
+msgstr "Nijedna testna strana"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "沤alim, podr啪avamo samo 2.4 kernele."
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Nemate nijedan browser instaliran na va拧em sistemu. Molim instalirajte jedan "
-"ako 啪elite pristupiti sistemu pomo膰i"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandsko oto膷je"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
-msgstr "Staza"
+msgid "Unknown model"
+msgstr "Nepoznat model"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "group :"
-msgstr "grupa :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
+"ako je postavljeno na da, provjerava datoteke/direktorije koje svako mo啪e "
+"pisati."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autentikacija"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "korisnik :"
+msgid "Backup Now"
+msgstr "Backup-uj sada"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "Izbor staze"
+msgid "/_File"
+msgstr "/_Datoteka"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "kada je uklju膷eno, vlasnik i grupa se ne mogu promijeniti"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Uklanjam 拧tampa膷 iz Star/Open Offica"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Koristi id grupe za izvr拧avanje"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Pokre膰e filtriranje paketa za Linux kernele serije 2.2 kako\n"
+"bi se aktivirao firewall i za拧titio va拧 ra膷unar od mre啪nih napada."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Koristi id vlasnika za izvr拧avanje"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamilska (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Koristi se za direktorij:\n"
-" samo vlasnik tog direktorija ili datoteke u ovom direktoriju ga mo啪e "
-"obrisati"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Creating auto install floppy..."
+msgstr "Pravim auto instalacijsku disketu..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Searching for scanners ..."
+msgstr "Tra啪im skenere ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Partitioning"
+msgstr "Particioniranje"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr "Osobina"
+msgid "Russia"
+msgstr "Rusija"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Privilegije"
+msgid "ethernet card(s) detected"
+msgstr "prepoznata ethernet kartica(e)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "Trenutni korisnik"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "pregledaj"
+msgid "Can't create catalog!"
+msgstr "Ne mogu napraviti katalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
-msgstr "Izmijeni trenutno pravilo"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Zaokru啪ite va拧 sigurnosni sistem ovim vrlo jednostavnim softverom koji spaja "
+"komponente visokih performansi, kao 拧to je firewall, VPN server i klijent, "
+"sistem za detekciju upada (intrusion detection system) inadzor saobra膰aja."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "izmijeni"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nema dovoljno prostora za auto-alokaciju"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Obri拧i izabrano pravilo"
+msgid "Set root password"
+msgstr "Podesite root 拧ifru"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "delete"
-msgstr "obri拧i"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Nema slobodnih drajvera za va拧u zvu膷nu karticu (%s), ali postoji vlasni膷ki "
+"drajver na \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Dodaj novo pravilo na kraj"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Nakon promjene veli膷ine particije %s, svi podaci na njoj 膰e biti izgubljeni"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "add a rule"
-msgstr "dodaj pravilo"
+msgid "Internet connection configuration"
+msgstr "Pode拧avanje Internet konekcije"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Pomjeri izabrano pravilo dole za jedan nivo"
+msgid "Scanning for TV channels"
+msgstr "Tra啪im TV kanale"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Down"
-msgstr "Dolje"
+msgid "Kernel:"
+msgstr "Kernel:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Pomjeri izabrano pravilo za jedan nivo gore"
+msgid "/_About..."
+msgstr "/_O programu..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Up"
-msgstr "Gore"
+msgid "Bengali"
+msgstr "Bengalska"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "izaberi perm datoteku za pregled/izmjenu"
+msgid "Preference: "
+msgstr "Preference: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm se koristi da pregledate datoteke koje 啪elite koristiti za primjenu "
-"privilegija, vlasnika i grupa putem msec-a.\n"
-"Mo啪ete tako膽er izmijeniti va拧a vlastita pravila koja 膰e prepisati "
-"podrazumijevana pravila."
+msgid "Wizard..."
+msgstr "膶arobnjak..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "permissions"
-msgstr "privilegije"
+msgid "Services: %d activated for %d registered"
+msgstr "Servisi: %d aktiviran za %d registrovan"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "group"
-msgstr "grupa"
+msgid "Create a bootdisk"
+msgstr "Napravite boot disketu"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "user"
-msgstr "korisnik"
+msgid "Solomon Islands"
+msgstr "Solomonska ostrva"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "path"
-msgstr "staza"
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lokacija datoteke auto_install.cfg"
+msgid "Workgroup"
+msgstr "Radna grupa"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Molim navedite gdje se nalazi datoteka auto_install.cfg.\n"
-"\n"
-"Ostavite ovo praznim ako ne 啪elite podesiti re啪im automatske instalacije.\n"
-"\n"
+msgid "Printer host name or IP"
+msgstr "Hostname 拧tampa膷a ili IP adresa"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Nije prona膽ena nijedna CD ili DVD slika, molim kopirajte instalacioni "
-"program i rpm datoteke."
+msgid "Host Path or Module"
+msgstr "Staza ili modul ra膷unara"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "Nije prona膽en nijedan image"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Naziv 拧tampa膷a bi se trebao sastojati od slova, brojeva i donje linije"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installation image directory"
-msgstr "Direktorij instalacionog image-a"
+msgid "Show current interface configuration"
+msgstr "Prika啪i postavke trenutnog interfejsa"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Molim navedite gdje se nalazi instalaciona slika.\n"
-"\n"
-"Ako nemate postoje膰i direktorij, molim kopirajte sadr啪aj CDa ili DVDa.\n"
-"\n"
+msgid "Development"
+msgstr "Programiranje"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Krajnja DHCP adresa"
+msgid "Done"
+msgstr "Gotovo"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Po膷etna DHCP adresa"
+msgid "Web Server"
+msgstr "Web server"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP server omogu膰uje pokretanje drugih ra膷unara koriste膰i PXE u zadatom "
-"rasponu adresa.\n"
-"\n"
-"Mre啪na adresa je %s koriste膰i netmasku %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
+msgstr "\tNe uklju膷uj sistemske datoteke\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfejs %s (na mre啪i %s)"
+msgid "Chile"
+msgstr "膶ile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Molimo izaberite koji mre啪ni interfejs 啪elite koristiti za spajanje na DHCP "
-"server."
+"Inkjet drajveri za 拧tampu koje obezbje膽uje Lexmark podr啪avaju samo lokalne "
+"拧tampa膷e, a ne i 拧tampa膷e na udaljenim ra膷unarima ili print serverima. "
+"Molimo spojite va拧 拧tampa膷 na lokalni port ili ga podesite na ra膷unaru na "
+"koji je spojen."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Sada 膰ete podesiti instalacioni server, koji se sastoji od PXE servera (DHCP "
-"servera) i TFTP servera.\n"
-"Sa ovom opcijom, mo膰i 膰ete instalirati Mandrake Linux na druge ra膷unare na "
-"va拧oj lokalnoj mre啪i koriste膰iovaj ra膷unar kao izvor.\n"
-"\n"
-"Prije nego 拧to nastavite, provjerite da li ste podesili mre啪ni/internet "
-"pristup koriste膰i drakconnect.\n"
+"Va拧 vi拧enamjenski ure膽aj je automatski konfigurisan kako bi mogao skenirati. "
+"Sada mo啪ete skenirati sa komandne linije pomo膰u komande \"scanimage"
+"\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate vi拧e od "
+"jednog) ili koriste膰i grafi膷ke okoline \"xscanimage\" ili \"xsane\". Ako "
+"koristite GIMP, mo啪ete tako膽er skenirati koriste膰i odgovaraju膰u stavku u "
+"meniju \"File\"/\"Acquire\". Za vi拧e informacija, pogledajte jo拧 i \"man "
+"scanimage\" na komandnoj liniji (\"#scanimage\" u Konqueroru).\n"
"\n"
-"Napomena: potreban vam je poseban Mre啪ni adapter da biste podesili Lokalnu "
-"mre啪u (LAN)."
+"Nemojte koristiti \"scannerdrake\" za ovaj ure膽aj!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Pode拧avanje instalacionog servera"
+msgid "(already added %s)"
+msgstr "(ve膰 dodan %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Pode拧avanje PXE servera"
+msgid ", using command %s"
+msgstr ", koriste膰i komandu %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Molim sa膷ekajte, pode拧avam sigurnosne opcije..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt i Shift tipke istovremeno"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Molim sa膷ekajre, pode拧avam nivo sigurnosti..."
+msgid "Flags"
+msgstr "Flagovi"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Periodi膷ne provjere"
+msgid "Add/Del Users"
+msgstr "Dodaj/obri拧i korisnike"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Sistemske opcije"
+msgid "Host/network IP address missing."
+msgstr "Nedostaje IP adresa ra膷unara/mre啪e."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "Mre啪ne opcije"
+msgid "weekly"
+msgstr "sedmi膷no"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Pode拧avanja"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Unesena IP adresa ra膷unara/mre啪e nije ispravna.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Ovdje je puna lista svih dostupnih dr啪ava"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternativna testna strana (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Mo啪ete podesiti sljede膰e opcije kako biste prilagodili\n"
-"sigurnost va拧eg sistema. Ako vam je potrebno obja拧njenje, pogledajte pomo膰 u "
-"tooltipu.\n"
+"Ako imate sve CDe na listi, kliknite na Ok.\n"
+"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
+"Ako nedostaju samo neki CDovi, isklju膷ite ih, zatim kliknite na Ok."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Sigurnosni administrator:"
+msgid "Wait please"
+msgstr "Molim sa膷ekajte"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Sigurnosna upozorenja:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Nivo sigurnosti:"
+msgid "Backup user files"
+msgstr "Backup korisni膷kih datoteka"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr " (default vrijednost: %s)"
+msgid "New"
+msgstr "Novi"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standardan: Ovo je standardna sigurnost koja se preporu膷uje za ra膷unar koji "
-"膰e biti kori拧ten za\n"
-" spajanje na Internet kao klijent.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Visok: Postoje ve膰 neka ograni膷enja, a automatizovane provjere se "
-"vr拧e svake no膰i.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Vi拧i: Sigurnost je sada dovoljno visoka da bi se sistem mogao "
-"koristiti kao server koji\n"
-" prihvata konekcije od mnogih klijenata. Ako je va拧 "
-"ra膷unar jedini klijent na Internetu,\n"
-" trebali biste izabrati ni啪i nivo.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoi膷an: Ovo je sli膷no kao prethodni nivo, ali je sistem potpuno "
-"zatvoren i sigurnosne\n"
-" mogu膰nosti su na maksimumu.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Sigurnosni administrator:\n"
-" Ako je postavljena opcija 'Sigurnosna upozorenja', ova "
-"upozorenja 膰e biti slana ovom\n"
-" korisniku (korisni膷ko ime ili email)."
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Ovo je najva啪nija odluka za sigurnost va拧eg GNU/Linux sistema: trebate\n"
+"unijeti \"root\" 拧ifru, \"Root\" je sistemski administrator i jedini "
+"korisnik kojem\n"
+"je dozvoljeno da updatuje sistem, dodaje druge korisnike, mijenja "
+"konfiguraciju\n"
+"sistema itd. Ukratko, \"root\" mo啪e raditi sve! Stoga trebate izabrati 拧ifru "
+"koju\n"
+"je te拧ko pogoditi - DrakX 膰e vam re膰i da li je 拧ifra koju ste odabrali "
+"prelagana.\n"
+"Kao 拧to mo啪ete vidjeti, niste prisiljeni da unesete 拧ifru, ali vam "
+"savjetujemo da\n"
+"to uradite. GNU/Linux je podlo啪an operatorskim gre拧kama kao i bilo koji "
+"drugi\n"
+"operativni sistem. Po拧to \"root\" mo啪e prevazi膰i sva ograni膷enja i "
+"nenamjerno\n"
+"pobrisati sve podatke na particijama neoprezno im pristupaju膰i, va啪no je da "
+"je\n"
+"te拧ko postati \"root\".\n"
"\n"
+"艩ifra treba biti kombinacija alfanumeri膷kih znakova i biti barem 8 znakova "
+"duga.\n"
+"Nikad ne zapisujte \"root\" 拧ifru -- time va拧 sistem postaje lagano "
+"kompromitovati.\n"
"\n"
+"Jedan izuzetak -- ne dozvolite da 拧ifra bude preduga ili prekomplikovana "
+"po拧to\n"
+"膰ete je morati zapamtiti!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"艩ifra ne膰e biti prikazana na ekranu dok je unosite. Da bismo smanjili "
+"mogu膰nost\n"
+"gre拧ke zbog kucanja naslijepo, mora膰ete unijeti 拧ifru dva puta. Ako nekim\n"
+"slu膷ajem ponovite istu gre拧ku dva puta, ovu ''neispravnu'' 拧ifru trebate "
+"koristiti\n"
+"prilikom prve prijave.\n"
"\n"
+"Ako 啪elite da pristup ovom ra膷unaru bude kontroliran pomo膰u servera za\n"
+"autentikaciju, kliknite na dugme \"Napredno\".\n"
"\n"
+"Ako va拧a mre啪a koristi LDAP, NIS ili PDC Windows domen autentikacione\n"
+"servise, izaberite odgovaraju膰i kao \"autentikaciju\". Ako ne znate koji\n"
+"koristiti, pitajte va拧eg mre啪nog administratora.\n"
"\n"
-"Napomena: ako imate ISA PnP zvu膷nu karticu, mora膰ete koristiti sndconfig "
-"program. Samo ukucajte \"sndconfig\" na konzoli."
+"Ako imate problema sa pam膰enjem 拧ifara, mo啪ete izabrati opciju \"Bez\n"
+"拧ifre\", pod uslovom da va拧 ra膷unar ne膰e biti spojen na Internet i da\n"
+"vjerujete svakome ko mu ima fizi膷ki pristup."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Nije prona膽ena nijedna zvu膷na kartica na va拧oj ma拧ini. Molim provjerite da "
-"li je ispravno spojena zvu膷na kartica koja je podr啪ana pod Linuxom.\n"
-"\n"
-"\n"
-"Mo啪ete posjetiti na拧u bazu hardvera na:\n"
-"\n"
+"Na ovom mjestu, DrakX vam omogu膰uje da izaberete sigurnosni nivo\n"
+"koji 啪elite imati na ovom ra膷unaru. Kao pravilo, sigurnosni nivo treba biti\n"
+"tim vi拧i 拧to su va啪niji podaci na ra膷unaru, a pogotovo ako 膰e ra膷unar biti\n"
+"direktno izlo啪en Internetu. Ve膰im nivoom sigurnosti obi膷no gubite na\n"
+"jednostavnosti kori拧tenja.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Ako ne znate 拧ta izabrati, zadr啪ite ponu膽enu opciju."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Nije izabrana zvu膷na kartica!"
+msgid "Load from floppy"
+msgstr "U膷itaj sa diskete"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) pregled"
+msgid "The following printer was auto-detected. "
+msgstr "Sljede膰i 拧tampa膷 je prepoznat automatski."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Generi拧em pregled..."
+msgid "Boot Floppy"
+msgstr "Boot disketa"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Morate izabrati image datoteku!"
+msgid "Norwegian"
+msgstr "Norve拧ka"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Izbor boje trake napretka"
+msgid "Searching for new scanners ..."
+msgstr "Tra啪im nove skenere ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Ova tema jo拧 nema bootsplash u %s !"
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Server"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Stepping procesora (broj submodela / generacije)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "snimam Bootsplash temu..."
+msgid "select path to restore (instead of /)"
+msgstr "izaberite stazu za vra膰anje (umjesto / )"
#: ../../standalone/draksplash:1
#, c-format
-msgid "choose image file"
-msgstr "izaberite image datoteku"
+msgid "Configure bootsplash picture"
+msgstr "Podesite bootsplash sliku"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image"
-msgstr "izaberite image"
+msgid "China"
+msgstr "Kina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Podesite bootsplash sliku"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "(Provjerite da li su svi 拧tampa膷i spojeni i upaljeni).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Kernel poruke podrazumijevano tihe"
+msgid "Georgia"
+msgstr "Gruzija"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Prika啪i logo na konzoli"
+msgid "Reading data of installed printers..."
+msgstr "膶itam podatke instaliranih 拧tampa膷a..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose color"
-msgstr "Izaberite boju"
+msgid " Erase Now "
+msgstr " Obri拧i odmah "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Save theme"
-msgstr "Snimi temu"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preview"
-msgstr "Pregled"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "boja progresne trake"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "da zna膷i da procesor ima aritmeti膷ki koprocesor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "visina progresne trake"
+msgid "Please Wait... Applying the configuration"
+msgstr "Molimo sa膷ekajte... Primjenjujem konfiguraciju"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "拧irina progresne trake"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Dobro do拧li u GRUB izbornik operativnog sistema!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"koordinate progresne trake y\n"
-"tj. njenog lijevog ugla"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"koordinate progresne trake x\n"
-"tj. njenog lijevog ugla"
+msgid "SCSI controllers"
+msgstr "SCSI kontroleri"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text box height"
-msgstr "visina tekst polja"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "na LPD serveru \"%s\", 拧tampa膷 \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "text width"
-msgstr "拧irina teksta"
+msgid "Choosing a display manager"
+msgstr "Izbor display managera"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y koordinata tekst polja\n"
-"u broju znakova"
+msgid "Zeroconf Host name"
+msgstr "Zeroconf Ime ra膷unara"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"x koordinata tekst polja\n"
-"u broju znakova"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresa treba biti u formatu 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Browse"
-msgstr "Pregledaj"
+msgid "Ecuador"
+msgstr "Ekvador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Theme name"
-msgstr "Naziv teme"
+msgid "Add an item"
+msgstr "Dodaj stavku"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "krajnja rezolucija"
+msgid "The printers on this machine are available to other computers"
+msgstr "艩tampa膷i na ovom ra膷unaru su dostupni drugim ra膷unarima"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "first step creation"
-msgstr "kreiranje prvog koraka"
+msgid "I can't find needed image file `%s'."
+msgstr "Ne mogu prona膰i potrebnu image datoteku '%s'"
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-"za dovr拧avanje pode拧avanja potreban je paket 'ImageMagick'.\n"
-"Kliknite na \"U redu\" da instalirate 'ImageMagick' ili \"Odustani\" za izlaz"
+"Nije otkrivena zvu膷na kartica. Probajte \"harddrake\" poslije instalacije"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"Na va拧em ra膷unaru nije detektovana TV kartica. Molim provjerite da li je "
-"ispravno priklju膷ena Video/TV kartica koja je podr啪ana pod Linuxom.\n"
-"\n"
-"\n"
-"Mo啪ete posjetiti na拧u bazu hardvera na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Zadan je neispravan port: %s.\n"
+"Odgovaraju膰i format je \"port/tcp\" ili \"port/udp\", \n"
+"gdje je \"port\" cijeli broj izme膽u 1 i 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Nije detektovana TV kartica!"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Sada mo啪ete pokrenuti xawtv (pod X Window sistemom!) !\n"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Have a nice day!"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome i Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV nije instaliran!"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ne mogu se prijaviti koriste膰i korisni膷ko ime %s (pogre拧na 拧ifa?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Do拧lo je do gre拧ke kod pretrage TV kanala"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbejd啪anska (latinica)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Tra啪im TV kanale"
+msgid "Package not installed"
+msgstr "Paket nije instaliran"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Pretraga TV kanala je u toku ..."
+msgid "Become a MandrakeExpert"
+msgstr "Postanite MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Area:"
-msgstr "Oblast :"
+msgid "American Samoa"
+msgstr "Ameri膷ka Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "TV norm:"
-msgstr "TV standard :"
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Kopiraj fontove na sistem"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Harddrake pomo膰"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "Bogomips"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Pode拧avanje Mandrake Terminal servera"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-"Molim,\n"
-"unesite va拧 tv standard i dr啪avu"
+"\n"
+" DrakBackup Detalji izvje拧taja\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australijska Optus kablovska TV"
+msgid "Restore all backups"
+msgstr "Vrati sve backupe"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Novi Zeland"
+msgid "if set to yes, check open ports."
+msgstr "ako je postavljeno na da, provjerava otvorene portove."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Francuska [SECAM]"
+msgid "This may take a moment to erase the media."
+msgstr "Potrebno je par trenutaka da se obri拧e medij."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Isto膷na Evropa"
+msgid "You can't select/unselect this package"
+msgstr "Ne mo啪ete izabrati/isklju膷iti ovaj paket"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "West Europe"
-msgstr "Zapadna Evropa"
+msgid "Warning"
+msgstr "Upozorenje"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Kina (broadcast)"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- ostale datoteke:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kablovska)"
+msgid "Remote host name"
+msgstr "Ime udaljenog ra膷unara"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
+msgid "deactivate now"
+msgstr "zaustavi sada"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kablovska)"
+msgid "access to X programs"
+msgstr "pristup X programima"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
+msgid "Computing the size of the Windows partition"
+msgstr "Izra膷unavam veli膷inu Windows particije"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kablovska)"
+msgid "Italy"
+msgstr "Italija"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Name of printer"
+msgstr "Naziv 拧tampa膷a"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-"XawTV nije instaliran!\n"
-"\n"
-"\n"
-"Ako imate TV karticu ali je DrakX nije prepoznao (ni bttv ni saa7134 modul "
-"se ne\n"
-"nalaze u \"/etc/modules\") niti je instalirao XawTV, molim po拧aljite "
-"rezultate naredbe\n"
-"\"lspcidrake -v -f\" na \"install\\@mandrakesoft.com\" sa naslovom "
-"\"undetected\n"
-"TV card\".\n"
-"\n"
-"\n"
-"Mo啪ete instalirati XawTV kucaju膰i \"urpmi xawtv\" na konzoli kao root."
+msgid "disable"
+msgstr "isklju膷i"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "primary"
-msgstr "primarni"
+msgid "error unmounting %s: %s"
+msgstr "gre拧ka u demontiranju %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "secondary"
-msgstr "sekundarni"
+msgid "Do it!"
+msgstr "Uradi!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "Kajmanska ostrva"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
+msgstr "%s ne odgovara"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select model manually"
+msgstr "Izaberite model ru膷no"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Format"
+msgstr "Formatiraj"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Kliknite na ure膽aj u lijevom drvetu kako biste prikazali njegove informacije."
+"Naj膷e拧膰i na膷in za konekciju sa adsl-om je pppoe.\n"
+"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
+"Ako ne znate, izaberite 'koristi pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Nepoznat"
+msgid "Various"
+msgstr "Razni"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "nepoznat"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Izvr拧avam \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Printerdrake nije mogao odrediti model va拧eg %s 拧tampa膷a. Molim izaberite "
+"odgovaraju膰i model na listi."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Pokreni alat za pode拧avanje"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Ozna膷ite 拧tampa膷e koje 膰ete prebacivati i kliknite na \n"
+"\"Prebaci\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Podesi modul"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informacije"
+msgid "Albanian"
+msgstr "Albanska"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Detektovani hardver"
+msgid "Lithuania"
+msgstr "Litvanija"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 verzija "
+msgid "Compact"
+msgstr "Kompaktno"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Detekcija u toku"
+msgid "Detected model: %s %s"
+msgstr "Detektovani model: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft je izabrao najbolji softver za vas"
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Ovo je HardDrake, Mandrake-ov alat za pode拧avanje hardvera.\n"
"Verzija:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "O Harddrake-u"
+msgid "Local files"
+msgstr "Lokalne datoteke"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_O programu..."
+msgid "maybe"
+msgstr "mo啪da"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Prijavi gre拧ku"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Nakon 拧to izaberete ure膽aj, mo膰i 膰ete vidjeti informacije o ure膽aju u "
-"poljima u desnom okviru (\"Informacije\")"
+"Izgleda da va拧a grafi膷ka kartica ima TV-OUT konektor.\n"
+"On se mo啪e podesiti da radi koriste膰i frame-buffer.\n"
+"\n"
+"Za ovo je potrebno da uklju膷ite grafi膷ku karticu u TV prije nego 拧to upalite "
+"ra膷unar.\n"
+"Zatim u meniju bootloadera izaberite opciju \"TVout\"\n"
+"\n"
+"Imate li ovu mogu膰nost?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Izaberite ure膽aj !"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Opis polja:\n"
+"Upravo 膰ete podesiti 拧tampanje na Windows ra膷un za拧ti膰en 拧ifrom. Zbog "
+"propusta u arhitekturi Samba klijentskog softvera, 拧ifra je stavljena u "
+"obi膷nom tekstu u komandnu liniju Samba klijenta prilikom slanja zadatka "
+"拧tampe Windows serveru. Stoga je mogu膰e da drugi korisnici ovog istog "
+"ra膷unara prika啪u 拧ifru na ekranu koriste膰i komandu kao 拧to je \"ps auxwww"
+"\".\n"
+"\n"
+"Preporu膷ujemo kori拧tenje jedne od sljede膰ih alternativa (u svakom slu膷aju "
+"pobrinite se da samo ra膷unari na va拧oj lokalnoj mre啪i imaju pristup Windows "
+"serveru, na primjer koriste膰i firewall):\n"
+"\n"
+"Koristite ra膷un bez 拧ifre na Windows serveru, kao 拧to je \"GUEST\" ra膷un ili "
+"poseban ra膷un posve膰en 拧tampanju. Nemojte ukloniti za拧titu 拧ifrom sa va拧eg "
+"li膷nog ra膷una ili administratorskog ra膷una.\n"
+"\n"
+"Podesite va拧 Windows server tako da je 拧tampa膷 dostupan pod LPD protokolom. "
+"Zatim podesite 拧tampanje na ovom ra膷unaru uz konekciju tipa \"%s\" u "
+"Printerdrake-u.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake pomo膰"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Opis polja"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/_Pomo膰"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Quit"
-msgstr "/_Izlaz"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Automatski prepoznaj _jazz ure膽aje"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 hiljada boja (16 bita)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Automatski prepoznaj _modeme"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- spasi na hard disku u direktoriju: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Automatski prepoznaj 拧tam_pa膷e"
+msgid "Size: %d KB\n"
+msgstr "Veli膷ina: %d KB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opcije"
+msgid "Remove fonts on your system"
+msgstr "Pobri拧i fontove sa mog sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "naziv proizvo膽a膷a procesora"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Upozorenje, mre啪ni adapter (%s) je ve膰 pode拧en.\n"
+"\n"
+"Da li 啪elite automatsko ponovno pode拧avanje?\n"
+"\n"
+"To mo啪ete obaviti ru膷no, ali morate znati 拧ta radite."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "naziv proizvo膽a膷a ure膽aja"
+msgid "Graphical interface at startup"
+msgstr "Grafi膷ki interfejs pri pokretanju"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Vrsta sabirnice na koju je spojen mi拧"
+msgid "Please enter the directory to save:"
+msgstr "Molimo unesite direktorij za spasiti:"
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Stepping procesora (broj submodela / generacije)"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Format disketa koje podr啪ava jedinica"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Model stepping"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nema dovoljno particija za RAID nivo %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "broj procesora"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Sljedeli 拧tampa膷i su pode拧eni. Kliknite dva puta na neki od njih za izmjenu "
+"postavki; ako ga 啪elite u膷initi podrazumjevanim 拧tampa膷em; ili da biste "
+"vidjeli informacije o njemu."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processor ID"
-msgstr "ID procesora"
+msgid "Connected"
+msgstr "Konektovan"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "network printer port"
-msgstr "port mre啪nog 拧tampa膷a"
+msgid "USB printer \\#%s"
+msgstr "USB 拧tampa膷 \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "naziv procesora"
+msgid "Macedonian"
+msgstr "Makedonska"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "Ime"
+msgid "Bridges and system controllers"
+msgstr "Mostovi (bridges) i sistemski kontroleri"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "broj dugmadi koje ima mi拧"
+msgid "/File/_Save"
+msgstr "/Datoteka/_Sa膷uvaj"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Broj dugmadi"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Zvani膷no ime proizvo膽a膷a procesora"
+msgid "No details"
+msgstr "Nema detalja"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Model name"
-msgstr "Naziv modela"
+msgid "very nice"
+msgstr "vrlo fino"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Generacija procesora (npr: 8 za PentiumIII, ...)"
+msgid "Preview"
+msgstr "Pregled"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Remote Control"
+msgstr "Udaljena kontrola"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "hard disk model"
-msgstr "model hard diska"
+msgid "Please select media for backup..."
+msgstr "Molim izaberite medij za backup..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "klasa hardverskog ure膽aja"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
-msgstr "Klasa medija"
+msgid "Allow Thin Clients"
+msgstr "Omogu膰i thin klijente"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Podgeneracija procesora"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gruzijska (\"ruski\" izgled)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Level"
-msgstr "Nivo"
+msgid "/_Options"
+msgstr "/_Opcije"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Format disketa koje podr啪ava jedinica"
+msgid "Your printer model"
+msgstr "Model va拧eg 拧tampa膷a"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Format diskete"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(PA沤NJA! Vi koristite XFS za va拧u root particiju,\n"
+"pravljenje boot diskete na 1.44 Mb disketi vjerovatno ne膰e\n"
+"raditi, po拧to XFS tra啪i veoma velik drajver)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr "Neki rani i486DX-100 chipovi "
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Obri拧i tar datoteke sa diska nakon backupa.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+"Nije prona膽ena nijedna CD ili DVD slika, molim kopirajte instalacioni "
+"program i rpm datoteke."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Rani Pentium procesori imaju bug koji izaziva smrzavanje sistema prilikom "
-"dekodiranja F00F bytecode-a"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake vi拧enamjenski alat za pode拧avanje"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "F00F bug"
+msgid "Save"
+msgstr "Spasi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "da zna膷i da aritmeti膷ki koprocesor ima priklju膷en exception vector"
+msgid "The %s is unsupported"
+msgstr "%s nije podr啪an"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Da li FPU ima IRQ vektor"
+msgid "Load the drivers for your usb devices."
+msgstr "Pokre膰e drajvere za va拧e USB ure膽aje."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "da zna膷i da procesor ima aritmeti膷ki koprocesor"
+msgid "Disk"
+msgstr "Disk"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Da li postoji FPU"
+msgid "Enter a printer device URI"
+msgstr "Unesite URI ure膽aja 拧tampa膷a"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Rani Intel Pentium procesori imaju bug u numeri膷kom koprocesoru koji ne "
-"posti啪e potrebnu preciznost prilikom izvr拧avanja dijeljenja sa teku膰im "
-"zarezom (FDIV)"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv bug"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flagovi koje je prijavio kernel"
+"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. Va拧 novi "
+"operativni sistem je rezultat zajedni膷kog rada Linux zajednice 拧irom svijeta."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flagovi"
+msgid "Israel"
+msgstr "Izrael"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modul Linux kernela koji upravlja ure膽ajem"
+msgid "French Guiana"
+msgstr "Francuska Gvajana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "novo dinami膷ko ime ure膽aja koje generi拧e kernelov devfs"
+msgid "add a rule"
+msgstr "dodaj pravilo"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Novi devfs ure膽aj"
+msgid "A command line must be entered!"
+msgstr "Trebate unijeti komandnu liniju!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "staro stati膷ko ime ure膽aja koje koristi dev paket"
+msgid "Select user manually"
+msgstr "Ru膷no izaberite korisnika"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Stara datoteka ure膽aja"
+msgid "Transfer printer configuration"
+msgstr "Premje拧tanje konfiguracije 拧tamap膷a"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Ovo polje opisuje ure膽aj"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Da li 啪elite omogu膰iti 拧tampanje na gore navedenim 拧tampa膷ima?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"Frekvencija CPUa u MHz (Megaherc je jedinica koja se mo啪e pribli啪no "
-"usporediti sa brojem instrukcija koje CPU izvr拧ava u sekundi)"
+"Da bi ovo radilo sa W2K PDCom, vjerovatno 膰e biti potrebno da admin izvr拧i:\n"
+" C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n"
+"i restartuje server. Tako膽e 膰e vam trebati korisni膷ko ime i 拧ifra "
+"administratora domena da biste pridru啪ili ra膷unar Windows(tm) domenu.\n"
+"Ako mre啪a jo拧 nije aktivirana, DrakX 膰e poku拧ati pristupanje domenu tek "
+"nakon 拧to pro膽ete kroz korak pode拧avanja mre啪e.\n"
+"Ako ovo pode拧avanje iz nekog razloga ne uspije i prijava na domen ne bude "
+"izvr拧ena, izvr拧ite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koriste膰i "
+"va拧u Windows(tm) domenu, kao i administratorovo korisni膷ko ime i 拧ifru nakon "
+"pokretanja sistema.\n"
+"Naredba 'wbinfo -t' 膰e provjeriti da li su va拧i podaci ispravni."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvencija (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Nivo informacija koje se mogu dobiti cpuid instrukcijom"
+msgid "Use network connection to backup"
+msgstr "Koristi mre啪nu konekciju za backup"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Nivo cpuid-a"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"you are not supposed to know them all by heart.\n"
+"\n"
+"If you are performing a standard installation from a CD-ROM, you will first\n"
+"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
+"the CD labels and highlight the boxes corresponding to the CDs you have\n"
+"available for installation. Click \"OK\" when you are ready to continue.\n"
+"\n"
+"Packages are sorted in groups corresponding to a particular use of your\n"
+"machine. The groups themselves are sorted into four sections:\n"
+"\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
+"\n"
+" * \"Development\": if the machine is to be used for programming, choose "
+"the\n"
+"desired group(s);\n"
+"\n"
+" * \"Server\": if your machine is intended to be a server, you will be able\n"
+"to select which of the most common services you wish to install on your\n"
+"machine;\n"
+"\n"
+" * \"Graphical Environment\": finally, this is where you will choose your\n"
+"preferred graphical environment. At least one must be selected if you want\n"
+"to have a graphical workstation!\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you deselect all groups when performing a regular\n"
+"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"With X\": install the fewer packages possible to have a working\n"
+"graphical desktop;\n"
+"\n"
+" * \"With basic documentation\" Installs the base system plus basic\n"
+"utilities and their documentation. This installation is suitable for\n"
+"setting up a server.\n"
+"\n"
+" * \"Truly minimal install\": will install the strict minimum necessary to\n"
+"get a working Linux system, in command line only. This installation is\n"
+"about 65Mb large.\n"
+"\n"
+"You can check the \"Individual package selection\" box, which is useful if\n"
+"you are familiar with the packages being offered or if you want to have\n"
+"total control over what will be installed.\n"
+"\n"
+"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
+"groups to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Familija CPUa (npr: 6 za i686 generaciju)"
+msgid "Accept user"
+msgstr "Prihvati korisnika"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid familija"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Da li ovaj CPU ima Cyrix 6x86 Coma bug"
+msgid "Bad choice, try again\n"
+msgstr "Pogre拧an izbor, poku拧ajte ponovo\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Heard and McDonald Islands"
+msgstr "Heard ostrvo i McDonaldova ostrva"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "posebne mogu膰nosti drajvera (mogu膰nost pr啪enja i/ili podr拧ka za DVD)"
+msgid "No alternative driver"
+msgstr "Nema alternativnog drajvera"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Kapacitet ure膽aja"
+msgid "Toggle to expert mode"
+msgstr "Prebaci u ekspertni mod"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Veli膷ina CPU ke拧a (drugog nivoa)"
+msgid "(on this machine)"
+msgstr "(na ovom ra膷unaru)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Veli膷ina cache-a"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway adresa treba biti u formatu 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- pci devices: ovo daje PCI slot, ure膽aj i funkciju ove kartice\n"
-"- eide devices: ure膽aj mo啪e biti master ili slave\n"
-"- scsi devices: SCSI id-ovi za: bus i device"
+"Otkrio sam winmodem baziran na \"%s\" chipsetu, 啪elite li instalirati "
+"odgovaraju膰i software ?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Lokacija na sabirnici"
+msgid "Looking at packages already installed..."
+msgstr "Tra啪im ve膰 instalirane pakete..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- PCI i USB ure膽aji: ovo 膰e izlistati PCI/USB id-ove za; vendor, device, "
-"subvendor i subdevice"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Identifikacija sabirnice (busa)"
+msgid "Driver"
+msgstr "Drajver"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"Linux kernel mora izvr拧iti prora膷unsku petlju prilikom boot-a kako bi "
-"inicijalizirao tajmer. Rezultat rada te petlje se prikazuje u vidu "
-"bogomipsa, kao jedan neprecizan pokazatelj brzine CPUa."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Linuxconf 膰e ponekad obaviti raznolike zadatke tokom boota\n"
+"kako bi se odr啪ala sistemska konfiguracija."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI channel"
+msgid "Printer on remote lpd server"
+msgstr "艩tampa膷 na udaljenom lpd serveru"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
+"instalirate na va[em sistemu.\n"
+"\n"
+"-Mo啪ete instalirati fontove koriste膰i uobi膷ajen na膷in. U rijetkim "
+"slu膷ajevima, neispravni fontovi mogu zaglaviti va拧 X Server."
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"ovo je fizi膷ka sabirnica na koju je ure膽aj priklju膷en (npr: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Sabirnica"
+msgid "No mouse"
+msgstr "Bez mi拧a"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "spisak alternativnih drajvera za ovu zvu膷nu karticu"
+msgid "Germany"
+msgstr "Njema膷ka"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativni drajveri"
+msgid "Austria"
+msgstr "Austrija"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "沤elite li da BackSpace vrati Delete u konzoli?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili va拧u zvu膷nu "
+"karticu"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Molimo izaberite izgled va拧e tastature."
+msgid "Collapse Tree"
+msgstr "Smanji stablo"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da pokrenem live upgrade !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Pode拧avanje auto instalacije"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "Pode拧avanje mre啪e"
+
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Gdje 啪elite smjestiti bootloader?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Molimo ubacite Instalacioni CD u va拧 CD-ROM ure膽aj i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
+"Va拧 izbor preferiranog jezika 膰e se odraziti na jezik dokumentacije,\n"
+"instalacione procedure i generalno sistema. Najprije izaberite oblast u\n"
+"kojoj se nalazite, a zatim jezik kojim govorite.\n"
+"\n"
+"Klikanjem na dugme \"Napredno\" mo啪ete izabrati druge jezike koje\n"
+"啪elite instalirati na va拧u radnu stanicu, time instaliraju膰i sistemsku\n"
+"dokumentaciju i aplikacije za svaki od izabranih jezika. Na primjet, ako\n"
+"膰e va拧 ra膷unar koristiti osobe iz 拧panije, izaberite Engleski kao osnovni\n"
+"jezik na listi, a 艩panski u oblasti Napredno.\n"
+"\n"
+"Obratite pa啪nju da niste ograni膷eni na samo jedan dodatni jezik. Mo啪ete\n"
+"ih izabrati nekoliko ili 膷ak ih instalirati sve klikom na polje \"Svi jezici"
+"\".\n"
+"Va拧 izbor podr拧ke za neki jezik ozna膷ava da 膰e biti instaliran prijevod,\n"
+"fontovi, pravila za provjeru pravopisa itd. za taj jezik. Pored toga, "
+"opcija\n"
+"\"Koristi Unicode\" 膰e prisiliti upotrebu Unicode-a (UTF-8) na cijelom\n"
+"sistemu. No, obratite pa啪nju da je ovo eksperimentalna mogu膰nost. Ako\n"
+"izaberete nekoliko jezika koji zahtijevaju razli膷ito kodiranje, Unicode 膰e\n"
+"svejedno biti instaliran.\n"
+"\n"
+"Da prebacujete izme膽u raznih jezika instaliranih na va拧em sistemu, mo啪ete\n"
+"pokrenuti kao \"root\" naredbu \"/usr/sbin/localedrake\", 膷ime mijenjate\n"
+"jezik koji koristi 膷itav sistem. Izvr拧avanjem te naredbe kao obi膷an "
+"korisnik\n"
+"mijenjate jezi膷ke postavke samo za tog konkretnog korisnika."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Promijenite CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Ova verzija Mandrake Linuxa ne podr啪ava %s,"
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
+msgid "DHCP client"
+msgstr "DHCP klijent"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Sa膷uvaj kao..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Povratak iz datoteke %s nije uspio: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Molimo unesite va拧u email adresu ispod"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serijski, stari C7 tip)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "postavka upozorenja"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Sigurno 啪elite podesiti 拧tampanje na ovom ra膷unaru?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Primi膰ete upozorenje ako je optere膰enje (system load) ve膰e od ove vrijednosti"
+msgid "New devfs device"
+msgstr "Novi devfs ure膽aj"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "postavka optere膰enja"
+msgid "ERROR: Cannot spawn %s."
+msgstr "GRE艩KA: Ne mogu pokrenuti %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Primi膰ete obavje拧tenje ako neki od izabranih servisa prestane raditi"
+msgid "Boot Style Configuration"
+msgstr "Konfiguracija stila boota"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automatska sinhronizacija vremena (koriste膰i NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "postavke servisa"
+msgid "Backup files not found at %s."
+msgstr "Backup datoteke nisu prona膽ene na %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd servis"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Hvala vam 拧to ste odabrali Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin servis"
+msgid "Armenian (phonetic)"
+msgstr "Armenska (fonetska)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH server"
+msgid "Card model:"
+msgstr "Model kartice:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba server"
+msgid "Thin Client"
+msgstr "Thin klijenti"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix mail server"
+msgid "Start Server"
+msgstr "Pokreni server"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP server"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
+msgid "All remote machines"
+msgstr "Svi udaljeni ra膷unari"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Server"
+msgid "Install themes"
+msgstr "Instaliraj teme"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Dobro do拧li u aplikaciju za pode拧avanje maila.\n"
-"\n"
-"Ovdje mo啪ete podesiti sistem obavje拧tavanja.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Pode拧avanje Mail obavijesti"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Mail obavijest"
+msgid "Preparing installation"
+msgstr "Pripremam instalaciju"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim sa膷ekajte, parsiram datoteku: %s"
+msgid "Edit selected host/network"
+msgstr "Izmijeni izabrani ra膷unar/mre啪u"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Sadr啪aj datoteke"
+msgid "Add User -->"
+msgstr "Dodaj korisnika -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Kalendar"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Izaberi datoteku"
+msgid "True Type fonts installation"
+msgstr "Instalacija True Type fontova"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "but not matching"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Automatski prepoznaj 拧tampa膷e spojene direktno na lokalnu mre啪u"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "matching"
+msgid "LAN configuration"
+msgstr "Pode拧avanje LANa"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Pode拧avanja"
+msgid "hard disk model"
+msgstr "model hard diska"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregled va拧ih logova"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Ne mo啪ete koristiti LVM logi膷ki volumen za ta膷ku montiranja %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "pretra啪ivanje"
+msgid "Get Windows Fonts"
+msgstr "Preuzmi fontove iz Windowsa"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Obja拧njenja Mandrake alata"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Iranska"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Poruke"
+msgid "Croatia"
+msgstr "Hrvatska"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Korisnik"
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Pomo膰/_O programu..."
+msgid "Add server"
+msgstr "Dodaj server"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
+msgid "Remote printer name"
+msgstr "Ime udaljenog 拧tampa膷a"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Datoteka/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft je dizajnirao ekskluzivne alate koji rezultiraju do sada "
+"najsigurnijom verzijom Linuxa: Draksec, alat za upravljanje sistemskom "
+"sigurno拧膰u, kao i mo膰an firewall su udru啪eni kako bi drasti膷nosmanjili rizik "
+"od provale u sistem."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/_Datoteka/Sa膷uvaj K_ao"
+msgid "Device: "
+msgstr "Ure膽aj: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Datoteka/_Sa膷uvaj"
+msgid "License agreement"
+msgstr "Licencni ugovor"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Sistemske opcije"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
+msgid "Please enter the directory where backups are stored"
+msgstr "Molim unesite direktorij gdje su smje拧teni backupi"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Molim izaberite nivo sigurnosti"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Ovaj ra膷unar je ve膰 na listi, ne mo啪ete ga ponovo dodati.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Prika啪i samo za izabrani dan"
+msgid ", USB printer"
+msgstr ", USB 拧tampa膷"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emuliraj tre膰e dugme?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Izaberite aplikacije koje 膰e podr啪avati fontove :"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Molimo izaberite vrstu va拧eg mi拧a."
+msgid "Configure X"
+msgstr "Pode拧avanje X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Konektuj se na %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turska (tradicionalni \"F\" model)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Prekini konekciju na %s"
+msgid "Congratulations!"
+msgstr "膶estitamo!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, mo啪da preko va拧e mre啪e"
+msgid "Use owner id for execution"
+msgstr "Koristi id vlasnika za izvr拧avanje"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "primljeno"
+msgid "Down"
+msgstr "Dolje"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "poslano"
+msgid "Raw printer (No driver)"
+msgstr "Sirovo 拧tampanje (Bez drajvera)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "primljeno:"
+msgid "Install rpm"
+msgstr "Instaliraj RPM"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "poslano:"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Za 拧tampanje datoteke sa komandne linije (terminalski prozor) mo啪ete "
+"koristiti ili komandu \"%s <datoteka>\" ili grafi膷ki alat za 拧tampu: \"xpp "
+"<datoteka>\" ili \"kprinter <datoteka>\". Grafi膷ki alati vam omogu膰uju da "
+"jednostavno odaberete 拧tampa膷 i izmjenite pode拧enja opcija.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokalne mjere"
+msgid "Time remaining "
+msgstr "Preostalo vremena "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "prosjek"
+msgid "UK keyboard"
+msgstr "UK tastatura"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Pode拧avanje boje"
+msgid "Unmount"
+msgstr "Demontiraj"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Konekcija nije uspjela.\n"
-"Provjerite konfiguraciju u Mandrake Kontrolnom centru."
+msgid "Uninstall Fonts"
+msgstr "Deinstaliraj fontove"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Konekcija zavr拧ena."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Prekid veze sa Internetom zavr拧en."
+msgid "German (no dead keys)"
+msgstr "Njema膷ka (bez mrtvih tipki)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Prekid veze sa Internetom nije uspio."
+msgid "Transferring %s..."
+msgstr "Prebacujem %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Spajam se na Internet"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 hiljada boja (15 bita)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Prekidam vezu na Internet"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Mo啪ete eksportovati koriste膰i NFS ili Sambu. Molim izaberite koji 啪elite "
+"koristiti."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Molim sa膷ekajte, probavam va拧u konekciju..."
+msgid "Reboot"
+msgstr "Restartuj"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Dnevnici"
+msgid "Gambia"
+msgstr "Gambija"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Vrijeme konekcije: "
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrolni centar"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Brzina prijema:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Mo啪ete unijeti raze portove. \n"
+"Primjeri ispravnih unosa su: 139/tcp 139/udp.\n"
+"Pogledajte datoteku /etc/services za vi拧e informacija."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Sending Speed:"
-msgstr "Brzina slanja:"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" Instalacioni program obi膷no mo啪e prepoznati i podesiti monitor koji\n"
+"je povezan na va拧 ra膷unar. Ako se ovo ne desi, mo啪ete odabrati neki\n"
+"monitor sa ove liste."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Statistika"
+msgid "\t-Tape \n"
+msgstr "\t-Traka \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profil"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Nemate nijedan browser instaliran na va拧em sistemu. Molim instalirajte jedan "
+"ako 啪elite pristupiti sistemu pomo膰i"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Nadzor mre啪e"
+msgid "Remember this password"
+msgstr "Zapamti ovu 拧ifru"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "膶itam podatke instaliranih 拧tampa膷a..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Dijeljenje Internet konekcije je sada uklju膷eno."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Ime/IP adresa ra膷unara:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Mre啪u preko SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Ovaj ra膷unar je ve膰 na listi, ne mo啪ete ga ponovo dodati.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Ako je 啪eljeni 拧tampa膷 automatski prepoznat, jednostavno ga izaberite sa "
+"liste i dodajte korisni膷ko ime, 拧ifru i/ili radnu grupu ako je to potrebno."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Koristi slobodan prostor na Windows particiji"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Morate unijeti ime ra膷unara ili IP.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s je prona膽en na %s, da ga podesim automatski?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Izaberite ra膷unar kojem treba omogu膰iti pristup lokalnim skenerima:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Dijeljenje lokalnih skenera"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 drajver: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This machine"
-msgstr "Na ovom ra膷unaru"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Ovaj ra膷unar/mre啪a je ve膰 na listi, ne mo啪ete ga ponovo dodati.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove selected host"
-msgstr "Ukloni izabrani ra膷unar"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Izvje拧taj \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host"
-msgstr "Izmijeni izabrani ra膷unar"
+msgid "Choose the packages you want to install"
+msgstr "Izaberite pakete koje 啪elite instalirati"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add host"
-msgstr "Dodaj ra膷unar"
+msgid "Papua New Guinea"
+msgstr "Papua Nova Gvineja"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Ovo su ra膷unari sa koji treba koristiti skenere:"
+msgid "Serbian (cyrillic)"
+msgstr "Srpska (膰irilica)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Upotreba udaljenih skenera"
+msgid "Make kernel message quiet by default"
+msgstr "Kernel poruke podrazumijevano tihe"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All remote machines"
-msgstr "Svi udaljeni ra膷unari"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"Da li 啪elite da podesite ovaj 拧tampa膷 (\"%s\")\n"
+"kao podrazumjevani 拧tampa膷?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "Ovo su ra膷unari kojima treba dozvoliti kori拧tenje lokalnog skenera:"
+msgid "The DHCP end range"
+msgstr "Kraj DHCP raspona"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Koristi skenere na ra膷unaru:"
+msgid "Creating bootdisk..."
+msgstr "Pravim boot disketu..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Koristi skenere na udaljenim ra膷unarima"
+msgid "Wait please, testing your connection..."
+msgstr "Molim sa膷ekajte, probavam va拧u konekciju..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Dijeljenje skenera za ra膷unare:"
+msgid "Bringing down the network"
+msgstr "Zaustavljam mre啪u"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skeneri na ovom ra膷unari su dostupni drugim ra膷unarima"
+msgid "Login ID"
+msgstr "Login ID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Ovdje tako膽e trebate odlu膷iti da li ovaj ra膷unar treba koristiti skenere na "
-"udaljenim ra膷unarima."
+"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mre啪a.\n"
+"Ovaj servis omogu膰uje NFS funkcionalnost zaklju膷avanja datoteka."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Ovdje mo啪ete izabrati da li skeneri spojeni na ovaj ra膷unar trebaju biti "
-"dostupni udaljenim ra膷unarima i kojim ra膷unarima."
+msgid "DHCP Client"
+msgstr "DHCP klijent"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Regeneriram listu pode拧enih skenera ..."
+msgid "dismiss"
+msgstr "otka啪i"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Tra啪im nove skenere ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "艩tampam/skeniram na \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Tra啪im pode拧ene skenere ..."
+msgid "omit raid modules"
+msgstr "izostavi raid module"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Dijeljenje skenera"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd je demon za 拧tampu koji je potreban da bi lpr sistem 拧tampe radio "
+"ispravno.\n"
+"To je u osnovi server koji dodjeljuje zadatke 拧tampe 拧tampa膷u/ima."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Ru膷no dodaj skener"
+msgid "Internet Connection Configuration"
+msgstr "Pode拧avanje Internet konekcije"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Tra啪enje novih skenera"
+msgid "comma separated numbers"
+msgstr "brojevi razdvojeni zarezom"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Nisam prona拧ao nijedan skener na va拧em sistemu.\n"
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
+"Nakon 拧to izaberete ure膽aj, mo膰i 膰ete vidjeti informacije o ure膽aju u "
+"poljima u desnom okviru (\"Informacije\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Pomjeri izabrano pravilo za jedan nivo gore"
#: ../../standalone/scannerdrake:1
#, c-format
@@ -19067,373 +19134,343 @@ msgstr ""
"%s\n"
"je dostupan na va拧em sistemu.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Sljede膰i skeneri\n"
-"\n"
-"%s\n"
-"su dostupni na va拧em sistemu.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Va拧 %s je pode拧en.\n"
-"Sada mo啪ete skenirati dokumente koriste膰i \"XSane\" koji se nalazi u meniju "
-"Aplikacije/Multimedija/Grafika."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "izaberite ure膽aj"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Da li 啪elite da uklonite 拧tampa膷 \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Molim izaberite ure膽aj gdje je priklju膷en va拧 %s"
+msgid "I can't find any room for installing"
+msgstr "Ne mogu na膰i dovoljno prostora za instalaciju"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Tra啪im skenere ..."
+msgid "Default printer"
+msgstr "Podrazumjevani 拧tampa膷"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto prepoznavaj dostupne portove"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Podesili ste nekoliko na膷ina za konekciju na Internet.\n"
+"Izaberite jedan od njih koji 膰ete koristiti.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Napomena: Paralelni portovi ne mogu biti automatski istra啪eni)"
+msgid "Modify RAID"
+msgstr "Modificiraj RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"%s se mora podesiti iz printerdrake-a.\n"
-"Mo啪ete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
-"Hardware."
+"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
+"karticu na idu膰em ekranu."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "%s nije podr啪an"
+msgid "Add user"
+msgstr "Dodaj korisnika"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Ova verzija Scannerdrake programa ne poznaje %s."
+msgid "RAID-disks %s\n"
+msgstr "RAID-diskovi %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Ova verzija Mandrake Linuxa ne podr啪ava %s,"
+msgid "Liberia"
+msgstr "Liberija"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Molim unesite naziv interfejsa spojenog na Internet.\n"
+"\n"
+"Primjeri:\n"
+"\t\tppp+ za modemsku ili DSL konekciju, \n"
+"\t\teth0, ili eth1 za mre啪nu konekciju, \n"
+"\t\tippp+ za isdn konekciju.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Izaberite va拧u tastaturu"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Detektovan model: %s"
+msgid "Format partitions"
+msgstr "Formatiranje particija"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatska ispravka konfiguracije CUPSa"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Izaberite model skenera"
+msgid "Running \"%s\" ..."
+msgstr "Izvr拧avam \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s nije u bazi skenera, 啪elite li ga ru膷no podesiti?"
+msgid "enable radio support"
+msgstr "uklju膷i radio podr拧ku"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s je prona膽en na %s, da ga podesim automatski?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Hardversko probanje u toku"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Dodani su neki ure膽aji:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Uklonjeni su neki ure膽aji u \"%s\" klasi hardvera:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Dijeljenje skenera za ra膷unare:"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. Va拧 novi "
-"operativni sistem je rezultat zajedni膷kog rada Linux zajednice 拧irom svijeta."
+msgid "Loopback file name: %s"
+msgstr "Naziv loopback datoteke: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Dobro do拧li u svijet otvorenog izvornog koda."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Molim izaberite 拧tampa膷 kojem 啪elite slati zadatke 拧tampe."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Hvala vam 拧to ste odabrali Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Nemoj prebacivati 拧tampa膷e"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Podijelite va拧e znanje i pomozite izgradnju Linux softvera, pridru啪ite se "
-"diskusijskim grupama na na拧im \"Community\" stranicama."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "膶ekanje prije bootanja default image-a"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"沤elite li saznati vi拧e i doprinijeti Open Source zajednici? Uklju膷ite se u "
-"svijet Slobodnog softvera!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Izgradite budu膰nost Linuxa!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"\tDUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Hvala:\n"
+" - pfm2afm: \n"
+"\t autor: Ken Borgendale:\n"
+"\t Konvertuje Windows .pfm datoteke u .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t autor: James Macnicol: \n"
+"\t Generi拧e datoteke fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t autor: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Konvertuje ttf font datoteke u afm i pfb fontove\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 vam omogu膰uje da potjerate va拧 multimedijalni ra膷unar do "
-"krajnjih granica! Koristite najnoviji softver za slu拧anje muzike i audio "
-"datoteka, mijenjajte i organizujte va拧e slike i fotografije, gledajte TV i "
-"video-snimke i mnogo drugog"
+msgid "Please check for multisession CD"
+msgstr "Molim uklju膷ite ako koristite multisesijski CD"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Surfajte koriste膰i Mozillu ili Konqueror, 膷itajte va拧u po拧tu sa Evolution "
-"ili KMail, pravite va拧e dokumente sa OpenOffice.org."
+msgid "user"
+msgstr "korisnik"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft je izabrao najbolji softver za vas"
+msgid "Use Hard Disk to backup"
+msgstr "Koristi hard disk za backup"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 vam pru啪a Mandrake Kontrolni centar, mo膰an alata koji "
-"potpuno prilago膽uje va拧 ra膷unar namjeni koju ste odredili za njega. Podesite "
-"i prilagodite elemente kao 拧to je nivo sigurnosti,periferni ure膽aji (ekran, "
-"mi拧, tastatura...), Internet konekciju i mnoge druge stvari!"
+msgid "Configure"
+msgstr "Podesi"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake vi拧enamjenski alat za pode拧avanje"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Prilagodite savr拧eno svoj ra膷unar va拧im potrebama pomo膰u 11 dosupnih "
-"Mandrake Linux korisni膷kih okolina koje se mogu potpuno prilagoditi: KDE "
-"3.1, GNOME 2.2, Window Maker, ..."
+"Upozorenje, otkrivena je druga Internet konekcija, mo啪da preko va拧e mre啪e"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Prilagodljiva okolina"
+msgid "Backup Users"
+msgstr "Backup korisnika"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Pisanje i izmjena programa u raznim jezicima kao 拧to su Perl, Python, C i C+"
-"+ nikad nije bilo lak拧e, zahvaljuju膰i GNU gcc 3 i najboljim Open Source "
-"razvojnim okolinama."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1: vrhunska razvojna platforma"
+"Molimo unesite naziv va拧eg ra膷unara ako ga znate.\n"
+"Naziv va拧eg ra膷unara bi trebao biti puno-kvalifikovani naziv,\n"
+"kao 拧to je ``mojcomp.mojlab.mojafirma.com''.\n"
+"Mo啪ete tako膽er unijeti IP adresu gateway-a ako ga imate"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Pretvorite va拧 ra膷unar u mo膰an Linux server: Web server, email, firewall, "
-"file i print server (itd.) su udaljeni samo nekoliko klikova mi拧em!"
+msgid "Select Printer Spooler"
+msgstr "Izaberite spooler 拧tampa膷a"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Pretvorite va拧 ra膷unar u pouzdan server"
+msgid "Create new theme"
+msgstr "Napravi novu temu"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"膶itav raspon Linux rje拧enja, kao i posebne ponude za proizvode i "
-"\"potrep拧tine\", dostupni su u na拧oj online radnji:"
+msgid "Mandrake Tools Explanation"
+msgstr "Obja拧njenja Mandrake alata"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Oficijelna MandrakeSoft prodavnica"
+msgid "No image found"
+msgstr "Nije prona膽en nijedan image"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Unaprijedite performanse va拧eg ra膷unara uz pomo膰 na拧ih odabranih partnera "
-"koji pru啪aju profesionalna rje拧enja kompatibilna sa Mandrake Linuxom"
+"Neki bitni paketi nisu ispravno instalirani.\n"
+"Ili je neispravan va拧 cdrom ure膽aj ili va拧 cdrom medij.\n"
+"Provjerite cdrom na instaliranom ra膷unaru koriste膰i \"rpm -qpl Mandrake/RPMS/"
+"*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Nabavite najbolje proizvode kod strate拧kih partnera Mandrake Linuxa"
+msgid "Detected model: %s"
+msgstr "Detektovan model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft je dizajnirao ekskluzivne alate koji rezultiraju do sada "
-"najsigurnijom verzijom Linuxa: Draksec, alat za upravljanje sistemskom "
-"sigurno拧膰u, kao i mo膰an firewall su udru啪eni kako bi drasti膷nosmanjili rizik "
-"od provale u sistem."
+"X11 Display Manager vam omogu膰uje da se grafi膷ki\n"
+"prijavite na va拧 sistem uz pokretanje X Window Systema, a podr啪ava i\n"
+"nekoliko razli膷itih X sesija na va拧em lokalnom ra膷unaru u isto vrijeme."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimizirajte va拧u sigurnost koriste膰i Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
+msgstr "ako je postavljeno na da, izvr拧ava dnevne sigurnosne provjere."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
-"Ovaj proizvod je dostupan na web stranici MandrakeStore (Mandrake "
-"prodavnica)."
+msgid "Azerbaijan"
+msgstr "Azerbejd啪an"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Zaokru啪ite va拧 sigurnosni sistem ovim vrlo jednostavnim softverom koji spaja "
-"komponente visokih performansi, kao 拧to je firewall, VPN server i klijent, "
-"sistem za detekciju upada (intrusion detection system) inadzor saobra膰aja."
+msgid "No tape in %s!"
+msgstr "Nema trake u %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Za拧titite va拧u mre啪u uz Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Pridru啪ite se MandrakeSoftovom support teamu i Linux zajednici na Internetu, "
-"podijelite va拧e znanje i pomozite drugima i tako postanite priznat Expert na "
-"na拧em online tech support sajtu:"
+"ovo je fizi膷ka sabirnica na koju je ure膽aj priklju膷en (npr: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Prona膽ite rje拧enja za va拧e probleme putem MandrakeSoft-ove online podr拧ke."
+msgid "How is the printer connected?"
+msgstr "Kako je 拧tampa膷 povezan na ra膷unar?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Postanite MandrakeExpert"
+msgid "Security level"
+msgstr "Nivo sigurnosti"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Sve incidente 膰e pratiti jedan kvalificiran MandrakeSoft tehni膷ki eksper."
+msgid "final resolution"
+msgstr "krajnja rezolucija"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Online platforma koja odgovara potrebama va拧eg preduze膰a za podr拧kom."
+msgid "Services"
+msgstr "Servisi"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19448,10 +19485,6 @@ msgstr ""
"gnumeric), pdf preglednici itd."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Stanica za igru"
@@ -19523,10 +19556,6 @@ msgstr ""
"K Desktop Environment, osnovno grafi膷ko okru啪enje sa izborom prate膰ih alata"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafi膷ko okru啪enje"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome Radna stanica"
@@ -19547,10 +19576,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Programiranje"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C i C++ razvojne biblioteke, programi i include datoteke"
@@ -19619,29 +19644,92 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, ssh server"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Audio stanica"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr "Skup alata za 膷itanje i slanje po拧te i news-a i pregledanje Weba"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Programi za slu拧anje i editovanje zvuka"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internet konekcija & pode拧avanje"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video stanica"
+#~ msgid "Configure the connection"
+#~ msgstr "Podesi konekciju"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Programi za pregled video datoteka"
+#~ msgid "Disconnect"
+#~ msgstr "Prekini konekciju"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Grafi膷ka stanica"
+#~ msgid "Connect"
+#~ msgstr "Konektuj me"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafi膷ki programi"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Mo啪ete prekonfigurisati va拧u konekciju."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr "Skup alata za 膷itanje i slanje po拧te i news-a i pregledanje Weba"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Mo啪ete se spojiti na Internet ili prekonfigurisati va拧u konekciju."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Trenutno niste konektovani na Internet."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Mo啪ete se diskonektovati ili prekonfigurisati va拧u konekciju."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Trenutno ste spojeni na Internet."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "slanje datoteka putem FTPa"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Pokre膰em 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Zapi拧i %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiraj %s u %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Backupujem %s u %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf fonts konverzija"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Konverzija fontova"
+
+#~ msgid "Author:"
+#~ msgstr "Autor:"
+
+#~ msgid "Audio station"
+#~ msgstr "Audio stanica"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programi za slu拧anje i editovanje zvuka"
+
+#~ msgid "Video station"
+#~ msgstr "Video stanica"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Programi za pregled video datoteka"
+
+#~ msgid "Graphic station"
+#~ msgstr "Grafi膷ka stanica"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Grafi膷ki programi"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
index cf6dd30f3..93faee006 100644
--- a/perl-install/share/po/ca.po
+++ b/perl-install/share/po/ca.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2002-10-10 3:34+0200\n"
"Last-Translator: Ra黮 Cambeiro <rulet@menta.net>\n"
"Language-Team: Catalan <traddrake@softcatala.org>\n"
@@ -14,998 +14,1800 @@ msgstr ""
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "S'estan explorant les particions per trobar els punts de muntatge"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tEsborra=%s"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr ", impressora de xarxa \"%s\", port %s"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Si us plau, inseriu un disquet:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"La compartici per usuari utilitza el grup \"fileshare\".\n"
-"Podeu utilitzar userdrake per a afegir un usuari a aquest grup."
+"La c騪ia de seguretat de la taula de particions no t la mateixa mida\n"
+"Voleu continuar igualment?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Cancel穕a"
+msgid "Which username"
+msgstr "Quin nom d'usuari?"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Executa userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Quin tipus d'entrada voleu afegir?"
-#: ../../any.pm:1
+#
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Restaura la taula de particions"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "en servidor CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Configuraci posterior a la instal穕aci"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Utilitzeu \"%s\" al seu lloc"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tipus"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Voleu permetre als usuaris compartir alguns dels seus directoris?\n"
-"Fer aix permetr al usuaris fer un simple clic a \"Comparteix\" en el "
-"konqueror i el nautilus.\n"
"\n"
-"\"Personalitzat\" permet configurar cada usuari per separat.\n"
+"Tampoc poden transferir-se les impressores configurades amb els fitxers PPD "
+"proporcionats pels seus fabricants o amb controladors nadius per a CUPS."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "El paquet %s necessari falta"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Podeu exportar utilitzant NFS o Samba. Seleccioneu quin voleu utilitzar."
+"\n"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Cal instal穕ar el paquet %s. Voleu instal穕ar-lo?"
+msgid "Central African Republic"
+msgstr "Rep鷅lica Centrefricana"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Personalitzada"
+msgid "Gateway device"
+msgstr "Dispositiu de la passarel穕a"
-#
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Permet tots els usuaris"
+msgid "Net Method:"
+msgstr "M鑤ode de xarxa:"
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Targeta Ethernet"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Parameters"
+msgstr "Par鄊etres"
#
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No sharing"
-msgstr "No es comparteix"
+msgid "Auto-detect"
+msgstr "Detecci autom鄑ica"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "M閟"
+msgid "Interface:"
+msgstr "Intef韈ie:"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Aquesta 閟 la llista completa de teclats disponibles"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Tipus d'instal穕aci"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratol."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr "en CDROM"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"No sembla que el sistema estigui connectat a Internet.\n"
+"Intenteu tornar a configurar la connexi."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Country"
-msgstr "Pa韘"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Connecteu la impressora a un servidor Linux i feu que els ordinadors Windows "
+"s'hi connectin com clients.\n"
+"\n"
+"Realment voleu continuar configurant aquesta impressora tal com s'est fent "
+"ara?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Escolliu el vostre idioma"
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bielorr鷖sia"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "Error writing to file %s"
+msgstr "S'ha produ飔 un error en escriure al fitxer %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux pot utilitzar m鷏tiples idiomes. Seleccioneu\n"
-"els llenguatges que volgueu instal穕ar. Estaran disponibles\n"
-"quan reinicieu el sistema, despr閟 que la instal穕aci s'hagi completat."
+"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
+"mitjan鏰nt el registre del sistema (syslog).\n"
+"Tamb es pot utilitzar per apagar l'ordinador quan queda poca bateria."
#
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
+msgid "Use tape to backup"
+msgstr "Utilitza una cinta per fer la c騪ia de seguretat"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
+msgid "The following packages are going to be installed"
+msgstr "Ara s'instal穕aran els paquets seg黣nts"
-#: ../../any.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per defecte:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Voleu utilitzar l'aboot?"
+msgid "CUPS configuration"
+msgstr "Configuraci de CUPS"
-#
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri autom鄑icament amb un "
-"nom d'usuari.\n"
-"Voleu activar aquesta caracter韘tica?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Entrada autom鄑ica"
+msgid "Not enough free space to allocate new partitions"
+msgstr "No hi ha prou espai lliure per assignar noves particions"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Icon"
-msgstr "Icona"
+msgid "Moving"
+msgstr "S'est movent"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Activitats del Drakbackup a trav閟 de %s:\n"
+"\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password"
-msgstr "Contrasenya"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Benvingut a l'auxiliar de configuraci de xarxa\n"
+"\n"
+"Ara es configurar la connexi a Internet/xarxa.\n"
+"Si no voleu utilitzar la detecci autom鄑ica, desactiveu el quadre de "
+"verificaci.\n"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "User name"
-msgstr "Nom d'usuari"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Real name"
-msgstr "Nom real"
+msgid "Lebanon"
+msgstr "L韇an"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Accepta l'usuari"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "Done"
-msgstr "Fet"
+msgid "Stop"
+msgstr "Atura"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "s'ha detectat %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introdu飖 un usuari\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "No s'ha definit cap dispositiu de CD!"
-#: ../../any.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Afegeix un usuari"
+msgid "Bulgarian (phonetic)"
+msgstr "B鷏gar (fon鑤ic)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP start ip"
+msgstr "L'adre鏰 inicial del rang del DHCP"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "El nom d'usuari 閟 massa llarg"
+msgid "Bootloader main options"
+msgstr "Opcions principals del carregador de l'arrencada"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"El nom d'usuari nom閟 pot contenir lletres en min鷖cula, n鷐eros, '-' i '_'"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Si us plau, introdu飖 un nom d'usuari"
+msgid "Tape"
+msgstr "Cinta"
-#: ../../any.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya 閟 massa senzilla"
+msgid "Scanning network..."
+msgstr "S'est escanejant la xarxa..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Amb aquesta opci podreu restaurar qualsevol versi骪n"
+" del directori /etc."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
+msgid "Malaysia"
+msgstr "Mal鄆sia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
+msgid "Swiss (French layout)"
+msgstr "Su韘 (disposici francesa)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "acc閟 a les eines de compilaci"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "L'mkraid ha fallat (potser manquen les eines del RAID (raidtools)?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "acc閟 a les eines de xarxa"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to administrative files"
-msgstr "acc閟 a fitxers administratius"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Targeta de so"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "permet \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Per imprimir un fitxer des de la l韓ia d'ordres (finestra de terminal) useu "
+"l'ordre \"%s <fitxer>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "acc閟 a les eines rpm"
+msgid "Level %s\n"
+msgstr "Nivell %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "acc閟 a programes X"
+msgid "Luxembourg"
+msgstr "Luxemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Aquestes s髇 les diferents entrades en el men d'arrencada.\n"
-"Podeu afegir-ne m閟 o canviar-ne les existents."
+"\n"
+" Informe del Dimoni DrakBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Un altre SO (Windows...)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Iraq"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
+msgid "Iraq"
+msgstr "Iraq"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"S'ha trobat un conflicte potencial d'adre鏰 LAN en la configuraci actual de "
+"%s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
+msgid "Configuring..."
+msgstr "S'est configurant..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja est en 鷖"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "La configuraci ja s'ha realitzat i ara est habilitada."
-#
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Heu d'especificar una partici arrel"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Per a les targetes de TV m閟 modernes, el m騞ul bttv del nucli GNU/Linux "
+"detecta autom鄑icament els par鄊etres correctes.\n"
+"Si la vostra targeta no 閟 detectada, podeu for鏰r el tipus de sintonitzador "
+"i de targeta aqu. Simplement seleccioneu els par鄊etres necessaris per a la "
+"vostra targeta de TV"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Heu d'especificar una imatge del nucli"
+msgid "Password (again)"
+msgstr "Contrasenya (un altre cop)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
+msgid "Search installed fonts"
+msgstr "Cerca les fonts instal穕ades"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Predeterminat"
+msgid "Venezuela"
+msgstr "Vene鐄ela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "Adre鏰 IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-size"
+msgid "Choose the sizes"
+msgstr "Escolliu les mides"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Afegeix"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Llista de dades corrompudes:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiqueta"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
-#: ../../any.pm:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "No segur"
+msgid "Choose another partition"
+msgstr "Trieu una altra partici"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Taula"
+msgid "Current user"
+msgstr "Usuari actual"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Arrel"
+msgid "Username"
+msgstr "Nom d'usuari"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lectura-escriptura"
+msgid "Left \"Windows\" key"
+msgstr "Tecla de \"Windows\" Esquerra"
-#: ../../any.pm:1
+#
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "Configuraci del servidor dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Mode de v韉eo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Usat per al directori:\n"
+" nom閟 el propietari del directori o del fitxer en aquest directori poden "
+"suprimir-lo"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Imatge"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "SO per defecte?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " en servidor Novell \"%s\", impressora \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
+msgid "Remove a module"
+msgstr "Elimina un m騞ul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
+msgid "Password"
+msgstr "Contrasenya"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Temps m鄕im d'arrencada del nucli"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Demora per al firmware obert"
+msgid "Advanced Configuration"
+msgstr "Configuraci avan鏰da"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr ", dispositiu multifunci"
#: ../../any.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
+msgid "Root"
+msgstr "Arrel"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Missatge d'inicialitzaci"
+msgid "Choose an existing RAID to add to"
+msgstr "Escolliu un RAID existent al qual afegir-ho"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Carregador de l'arrencada a utilitzar"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turc (modern, model \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador de l'arrencada"
+msgid "Lilo message not found"
+msgstr "No s'ha trobat el missatge de LILO"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"L'opci \"Limita les opcions de la l韓ia d'ordres\" no t cap utilitat sense "
-"una contrasenya"
+"Regeneraci autom鄑ica del cap鏰l de nucli a /boot per\n"
+"/usr/include/linux/{autoconf,versi髛.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Introdu飖 la mida de la RAM en MB"
+msgid "if needed"
+msgstr "si cal"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Habilita perfils m鷏tiples"
+msgid "Restore Failed..."
+msgstr "La restauraci ha fallat..."
-#: ../../any.pm:1
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Detectada autom鄑icament"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Descripci:\n"
+"\n"
+" El Drakbackup s'usa per fer c騪ies de seguretat del sistema.\n"
+" Durant la configuraci podeu seleccionar: \n"
+"\t- Fitxers de sistema\n"
+"\t- Fitxers d'usuari\n"
+"\t- Altres fitxers\n"
+"\to Tot el Sistema... i Altres (com les Particions de Windows)\n"
+"\n"
+" El Drakbackup us permet fer c騪ies de seguretat del sistema en:\n"
+"\t- Disc dur\n"
+"\t- NFS\n"
+"\t- CDROM (CDRW), DVDROM (amb arrencada autom鄑ica, rescat i instal穕aci "
+"autom鄑ica)\n"
+"\t- FTP\n"
+"\t- Rsync\n"
+"\t- Webdav\n"
+"\t- Cinta\n"
+"\n"
+" El Drakbackup us permet restaurar el sistema a\n"
+" un directori seleccionat d'usuari.\n"
+"\n"
+" Per defecte totes les c騪ies de seguretat es guarden en\n"
+" el directori /var/lib/drakbackup\n"
+"\n"
+" Fitxer de Configuraci:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"El pas de restauraci:\n"
+" \n"
+" Durant el pas de restauraci, el DrakBackup esborrar \n"
+" els directoris originals i verificar que cap de \n"
+" les c騪ies de seguretat no est malmesa. 蓅 recomanable que \n"
+" feu una 鷏tima c騪ia de seguretat abans de restaurar.\n"
+"\n"
+"\n"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Introducci骪n"
+"\n"
+"D'ara endavant, hom es referir al sistema operatiu i als diferents\n"
+"components disponibles en la distribuci Mandrake Linux com als\n"
+"\"Productes de programari\". Els Productes de programari inclouen,\n"
+"per no estan restringits a, el conjunt de programes, m鑤odes, regles\n"
+"i documentaci relativa al sistema operatiu i els diferents\n"
+"components de la distribuci Mandrake Linux.\n"
+"\n"
+"\n"
+"1. Acord de llic鑞cia\n"
+"\n"
+"Si us plau, llegiu atentament aquest document. Aquest document 閟 un\n"
+"acord de llic鑞cia entre la vostra persona i MandrakeSoft S.A., que\n"
+"s'aplica als Productes de programari. Pel fet d'instal穕ar, duplicar\n"
+"o utilitzar els Productes de programari en qualsevol forma esteu\n"
+"acceptant expl韈itament, i expressant el vostre acord a avenir-vos a\n"
+"les cl鄒sules i condicions d'aquesta Llic鑞cia. Si no esteu d'acord\n"
+"amb qualsevol part de la Llic鑞cia, no esteu autoritzat a instal穕ar,\n"
+"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
+"d'instal穕ar, duplicar o utilitzar els Productes de programari en una\n"
+"forma que no s'adapti a les cl鄒sules i condicions d'aquesta\n"
+"Llic鑞cia, 閟 nul i finalitzar els vostres drets sobre la mateixa.\n"
+"En finalitzar-se la Llic鑞cia, heu de destruir immediatament totes\n"
+"les c騪ies dels Productes de programari.\n"
+"\n"
+"\n"
+"2. Garantia limitada\n"
+"\n"
+"Els Productes de programari i documentaci adjunta es subministren\n"
+"\"tal com s髇\", sense cap garantia, fins al punt perm閟 per la llei.\n"
+"MandrakeSoft S.A. no ser, sota cap circumst鄋cia, i fins al punt\n"
+"perm閟 per la llei, responsable de cap dany especial, incidental ni\n"
+"directe (incloent, sense limitar-se a, els danys per p鑢dua de\n"
+"negocis, interrupci de negocis, p鑢dues financeres, multes i costes\n"
+"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
+"qualsevol altre p鑢dua d'import鄋cia) que resulti de l'鷖 o de la\n"
+"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
+"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
+"s'esdevinguin aquests danys.\n"
+"\n"
+"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSI O UTILITZACI DE PROGRAMARI "
+"PROHIBIT EN ALGUNS PA蟂OS\n"
+"\n"
+"Fins al punt perm閟 per la llei, MandrakeSoft S.A. o els seus\n"
+"distribu飀ors no seran, sota cap circumst鄋cia, responsables de cap\n"
+"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
+"els danys per p鑢dua de negocis, interrupci de negocis, p鑢dues\n"
+"financeres, multes i costes judicials, o qualsevol altre dany que\n"
+"resultin d'un judici, o qualsevol altre p鑢dua d'import鄋cia) que\n"
+"resulti de la possessi i utilitzaci dels components de programari o\n"
+"de la seva desc鄏rega des d'un dels llocs de Mandrake Linux, que\n"
+"estiguin prohibides o restringides en alguns pa飐os per les lleis\n"
+"locals. Aquesta responsabilitat limitada s'aplica, per no hi est郳n"
+"restringida, als potents components criptogr鄁ics inclosos als\n"
+"Productes de programari.\n"
+"\n"
+"\n"
+"3. la llic鑞cia GPL i llic鑞cies relacionades\n"
+"\n"
+"Els Productes de programari consisteixen en components creats per\n"
+"diferents persones o entitats. La majoria d'aquests components es\n"
+"regeixen per les cl鄒sules i condicions de la Llic鑞cia General\n"
+"P鷅lica de GNU, a la qual d'ara endavant hom s'hi referir com a\n"
+"\"GPL\", o de llic鑞cies similars. la majoria d'aquestes llic鑞cies\n"
+"us permeten duplicar, adaptar o redistribuir els components que\n"
+"cobreixen. Si us plau, llegiu atentament les cl鄒sules i condicions\n"
+"de l'acord de llic鑞cia de cada component abans d'utilitzar-lo.\n"
+"Qualsevol pregunta sobre la lllic鑞cia d'un component s'ha d'adre鏰r\n"
+"al seu autor i no a MandrakeSoft.\n"
+"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
+"llic鑞cia GPL.La documentaci escrita per MandrakeSoft S.A. est regida per "
+"una\n"
+"llic鑞cia espec韋ica; consulteu la documentaci per a m閟\n"
+"informaci.\n"
+"\n"
+"\n"
+"4. Drets sobre la propietat intel穕ectual\n"
+"\n"
+"Tots els drets sobre els components dels Productes de programari\n"
+"pertanyen als seus autors respectius i estan protegits per les lleis\n"
+"de propietat intel穕ectual i de copyright aplicables als programes\n"
+"inform鄑ics.\n"
+"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
+"Productes de programari, totalment o parcialment, per tots els\n"
+"mitjans i amb totes les finalitats.\n"
+"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
+"registrades de MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. Lleis rectores \n"
+"\n"
+"Si qualsevol part d'aquest acord 閟 declarat nul, il穕egal o\n"
+"inaplicable per un tribunal, aquesta part s'exclour del contracte.\n"
+"Seguiu obligat, per, per les altres seccions aplicables de\n"
+"l'acord.\n"
+"Les cl鄒sules i condicions d'aquesta Llic鑞cia es regeixen per les\n"
+"lleis de Fran鏰.\n"
+"Tots els litigis sobre les cl鄒sules d'aquesta llic鑞cia es dirimiran\n"
+"preferiblement fora dels tribunals. Com a 鷏tim recurs, el litigi es\n"
+"portar als tribunals competents de Par韘, Fran鏰.\n"
+"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
+"contacte amb MandrakeSoft S.A.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"coordenada x de la cantonada superior\n"
+"esquerra de la barra de progr閟"
-#: ../../any.pm:1
+#
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Mostra la configuraci actual de la interf韈ie"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Crea un disc d'arrencada"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "restrict"
-msgstr "limita"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Si teniu una targeta ISA, els valors de la pantalla seg黣nt haurien de ser "
+"correctes.\n"
+"\n"
+"Si teniu una targeta PCMCIA, cal que en sapigueu l'\"irq\" i l'\"io\".\n"
-#: ../../any.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la l韓ia d'ordres"
+msgid "Do not print any test page"
+msgstr "No imprimeixis cap p鄃ina de prova"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Aquesta contrasenya 閟 massa curta (ha de tenir com a m韓im %d car郼ters)"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Voleu habilitar l'arrencada des de CD?"
+msgid "[keyboard]"
+msgstr "Teclat"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
+msgid "FTP proxy"
+msgstr "Intermediari per a FTP"
-#: ../../any.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "compact"
-msgstr "compacte"
+msgid "Install List"
+msgstr "Llista d'instal穕aci"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Compact"
-msgstr "Compacte"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Canvia el cam韁n"
+"on restaurar"
-#: ../../any.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instal穕aci del carregador de l'arrencada"
+msgid "Show only for the selected day"
+msgstr "Mostrar-ho nom閟 per al dia seleccionat"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partici d'arrencada"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instal穕ar el carregador de l'arrencada?"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instal穕aci del LILO/grub"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Instal穕aci del SILO"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Skip"
-msgstr "Omet"
+msgid "What kind of card do you have?"
+msgstr "Quin tipus de targeta teniu?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Disquet d'arrencada"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Seguretat"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Tamb podeu emprar la interf韈ie gr鄁ica \"xpdq\" per configurar opcions i "
+"gestionar treballs d'impressi.\n"
+"Si esteu utilitzant KDE com a entorn gr鄁ic per defecte, teniu un \"bot "
+"d'emerg鑞cia\", una icona a l'escriptori, etiquetada amb \"ATURA la "
+"impressora!\", que atura tots el treballs d'impressi immediatament en fer-"
+"hi clic. Aix 閟 鷗il, per exemple, quan se us enganxa el paper en la "
+"impressora.\n"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Primer sector de la partici d'arrencada"
+msgid "Unknown"
+msgstr "Model desconegut"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Configuraci de xarxa"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Heu decidit instal穕ar el gestor de l'arrencada en una partici.\n"
-"Aix implica que ja teniu un gestor d'arrencada en el disc des del qual "
-"arrenqueu (p.ex.: System Commander).\n"
-"\n"
-"En quina unitat arrenqueu?"
+"Protocol per a la resta del m髇\n"
+"Cap canal D (l韓ies punt a punt)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "S'est creant el disc d'arrencada..."
+msgid "Option %s must be a number!"
+msgstr "L'opci %s ha de ser un n鷐ero!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inseriu un disquet a la unitat %s"
+msgid "Notice"
+msgstr "Av韘"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
-"d'arrencada"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Segona unitat de disquet"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Primera unitat de disquet"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"S'ha detectat la seg黣nt impressora. La configuraci de la impressora es "
+"far autom鄑icament. Si la vostra impressora no ha estat correctament "
+"detectada o si preferiu personalitzar la seva configuraci, habiliteu "
+"\"Configuraci manual\"."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
+msgid "What type of partitioning?"
+msgstr "Quin tipus de particionament voleu?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Aix 閟 "
-"鷗il\n"
-"si no voleu instal穕ar el LILO (o el grub) al sistema, o si un altre sistema "
-"operatiu\n"
-"elimina el LILO, o si el LILO no funciona amb la vostra configuraci de\n"
-"maquinari. Un disc d'arrencada personalitzat tamb es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperaci de fallides\n"
-"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
-"sistema?\n"
-"%s"
+"llista de fitxers enviada per FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Interf韈ie"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"descripci de les opcions:\n"
+"\n"
+" - C騪ia de seguretat dels fitxers de sistema:\n"
+" \n"
+"\tAquesta opci us permet fer c騪ies del directori /etc,\n"
+"\tque cont tots els fitxers de configuraci. Tingueu\n"
+"\tcura durant el pas de restauraci de no sobreescriure:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - C騪ia de seguretat dels fitxers d'usuari: \n"
+"\n"
+"\tAquesta opci permet seleccionar els usuaris dels quals voleu \n"
+"\tfer c騪ia de seguretat.\n"
+"\tPer preservar espai de disc, es recomanable que no inclogueu \n"
+"\tla mem騬ia cau del navegador.\n"
+"\n"
+" - C騪ia de seguretat d'altres fitxers: \n"
+"\n"
+"\tAquesta opci us permet afegir m閟 dades per desar.\n"
+"\tAmb aquesta opci de c騪ia encara no 閟 possible activar\n"
+"\tl'opci de c騪ia incremental.\t\t\n"
+" \n"
+" - C騪ia de seguretat incremental:\n"
+"\n"
+"\tLa c騪ia incremental 閟 l'opci m閟 potent a l'hora de fer \n"
+"\tc騪ies de seguretat. Aquesta opci us permet fer una c騪ia \n"
+"\tde seguretat de totes les dades la primera vegada, i \n"
+"\tnom閟 de les dades canviades despr閟.\n"
+"\tM閟 tard, sereu capa, durant el proc閟 de restauraci, \n"
+"\tde restaurar les dades d'una data determinada.\n"
+"\tSi no s'activa aquesta opci totes les c騪ies de \n"
+"\tseguretat antigues s'esborren abans de cada nova c騪ia. \n"
"\n"
"\n"
-"(COMPTE! Esteu utilitzant XFS per la vostra partici arrel,\n"
-"la creaci d'un disquet d'arrencada amb un de 1.44 MB molt probablement "
-"fallar,\n"
-"perqu XFS necessita una unitat molt gran)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Aix 閟 "
-"鷗il\n"
-"si no voleu instal穕ar el SILO al sistema, o si un altre sistema operatiu\n"
-"elimina el SILO, o si el SILO no funciona amb la vostra configuraci de\n"
-"maquinari. Un disc d'arrencada personalitzat tamb es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperaci de fallides\n"
-"serioses del sistema.\n"
-"\n"
-"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
-"a la primera unitat i premeu \"D'acord\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No podeu instal穕ar el carregador de l'arrencada a una partici %s\n"
+msgid "comma separated strings"
+msgstr "cadenes separades per coma"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "L'entrada ressaltada arrencara automaticament en %d segons."
+msgid "Messages"
+msgstr "Missatges"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordres abans de l'arrencada, o 'c' per obtenir una linia d'ordres."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Desconegut|CPH06X (bt878) [molts venedors]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Premeu Retorn per arrencar el SO seleccionat, 'e' per editar les"
+msgid "POP and IMAP Server"
+msgstr "Servidor POP i IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilitzeu les tecles %c i %c per seleccionar quina entrada esta ressaltada."
+msgid "Mexico"
+msgstr "M鑨ic"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "par鄊etre de c鄏rega"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Teniu alguna interf韈ie %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO amb men de text"
+msgid "Switzerland"
+msgstr "Su飐sa"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO amb men gr鄁ic"
+msgid "Brunei Darussalam"
+msgstr "Brunei"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Opcions de la impressora lpd remota"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Benvingut al %s, el selector de sistema operatiu!\n"
+"GNU/Linux 閟 un sistema multiusuari, i aix vol dir que cada usuari pot "
+"tenir\n"
+"les seves prefer鑞cies, els seus fitxers, etc. Podeu llegir la \"Guia de "
+"l'Usuari\"\n"
+"per aprendre m閟 coses. A difer鑞cia del \"root\", que 閟 l'administrador, \n"
+"als usuaris que afegiu aqu no se'ls permetr modificar res tret dels seus\n"
+"fitxers i la seva configuraci. Cal que tingueu com a m韓im un usuari "
+"normal.\n"
+"Aquest compte 閟 en el que haur韊u d'entrar per a un 鷖 habitual. Tot i que "
+"閟\n"
+"molt pr郼tic entrar en el sistema com a \"root\" cada dia, tamb pot ser "
+"molt\n"
+"perill髎. La m閟 petita errada podr韆 significar que el sistema deix閟 de "
+"funcionar.\n"
+"Si cometeu una gran errada com a usuari normal, podeu perdre algunes dades, "
+"per no\n"
+"tot el sistema.\n"
"\n"
-"Trieu un sistema operatiu de la lista superior, o espereu\n"
-"%d segons per arrencar en el sistema operatiu predeterminat.\n"
+"Primer, heu d'introduir el vostre nom real. Per suposat, aix no 閟 "
+"necessari, ja que\n"
+"podeu introduir el que volgueu. El DrakX agafar la primera paraula que heu "
+"entrat\n"
+"en la casella i la copiar en el \"Nom d'usuari\". Aquest 閟 el nom que "
+"utilitzar郳n"
+"aquest usuari per entrar en el sistema. El podeu canviar si voleu. Despr閟 "
+"cal que\n"
+"introdu飖 una contrasenya. Una contrasenya d'un usuari no privilegiat "
+"(habitual) \n"
+"no 閟 tant important com la del \"root\" des del punt de vista de la "
+"seguretat, \n"
+"per no hi ha cap ra per menystenir-ho: al cap i a la fi, els vostres "
+"fitxers\n"
+"estan en joc.\n"
"\n"
+"Si cliqueu a \"Accepta l'usuari\", despr閟 en podreu afegir tants com "
+"volgueu. Afegiu\n"
+"un usuari per tothom qui hagi de fer servir l'ordinador. Quan hagueu acabat "
+"d'afegir\n"
+"tants usuaris com volgueu, seleccioneu \"Fet\".\n"
+"\n"
+"Si feu clic al bot \"Avan鏰t\" podreu canviar l'int鑢pret d'ordres (\"shell"
+"\") \n"
+"predeterminat de l'usuari seleccionat (bash per defecte).\n"
+"\n"
+"Un cop hagueu acabat d'afegir usuaris, se us proposar triar quin usuari "
+"entrar郳n"
+"autom鄑icament en el sistema en arrencar l'ordinador. Si us interessa "
+"aquesta \n"
+"caracter韘tica (i no us importa gaire la seguretat local), trieu l'usuari i "
+"el\n"
+"gestor de finestres desitjat i feu clic a \"S韁".\n"
+"Si no us interessa aquesta caracter韘tica, pitgeu \"No\"."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "El consolehelper no hi 閟"
+msgid "Configure Internet Access..."
+msgstr "Configura l'acc閟 a Internet..."
-#: ../../common.pm:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "El kdesu no hi 閟"
+msgid "Norway"
+msgstr "Noruega"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures estaran disponibles despr閟 d'instal穕ar a %s"
+msgid "Danish"
+msgstr "Dan鑣"
-#
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "No es poden fer captures de pantalla abans de fer les particions"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Engega autom鄑icament a l'arrencada la tecla de fixaci del \n"
+"teclat num鑢ic a la consola i sota XFree."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Si us plau, introdu飖 la configuraci IP d'aquest ordinador.\n"
+"S'ha d'introduir cada element com una adre鏰 IP en notaci decimal amb\n"
+"punts (per exemple, 1.2.3.4)."
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minut"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"La instal穕aci del Mandrake Linux est repartida en diversos CD-ROM. El "
+"DrakX\n"
+"sap si un paquet seleccionat es troba a un altre CD-ROM i expulsar el CD "
+"actual\n"
+"i us demanar que n'inseriu un altre a mesura que ho necessiti."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
+msgid "Processors"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulg鄏ia"
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "No heu seleccionat cap NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Illes Svalbard i Jan Mayen"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "kB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Hi ha hagut problemes durant la configuraci.\n"
+"Proveu la connexi via net_monitor o mcc. Si la connexi no funciona "
+"correctament, torneu a executar la configuraci."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Estats Units"
+msgid "partition %s is now known as %s"
+msgstr "la partici %s ara 閟 %s"
#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "纔stria"
+msgid "Backup Other files..."
+msgstr "Fes una c騪ia de seguretat d'altres fitxers..."
-#
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "It鄉ia"
+msgid "SMB server IP"
+msgstr "IP del servidor SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Pa飐os Baixos"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Su鑓ia"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "La taula de particions de la unitat %s s'escriur al disc!"
#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "S'estan instal穕ant els paquets..."
+
+#: ../../any.pm:1
#, c-format
-msgid "Norway"
-msgstr "Noruega"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
+"vostre\n"
+"sistema Linux sense dependre del carregador d'arrencada normal. Aix 閟 "
+"鷗il\n"
+"si no voleu instal穕ar el LILO (o el grub) al sistema, o si un altre sistema "
+"operatiu\n"
+"elimina el LILO, o si el LILO no funciona amb la vostra configuraci de\n"
+"maquinari. Un disc d'arrencada personalitzat tamb es pot utilitzar amb la\n"
+"imatge de rescat del Mandrake, facilitant molt la recuperaci de fallides\n"
+"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
+"sistema?\n"
+"%s"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", USB printer \\#%s"
+msgstr ", impressora USB \\/*%s"
#
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Greece"
-msgstr "Gr鑓ia"
+msgid "Latvian"
+msgstr "Let"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Germany"
-msgstr "Alemanya"
+msgid "monthly"
+msgstr "mensual"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech Republic"
-msgstr "Rep鷅lica Txeca"
+msgid "Module name"
+msgstr "Nom del m騞ul"
#
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Belgium"
-msgstr "B鑜gica"
+msgid "Start at boot"
+msgstr "Inicia en l'arrencada"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr ""
+"Usa les c騪ies de seguretat incrementals (no reemplacis les c騪ies antigues)"
+
+#: ../../any.pm:1
#, c-format
-msgid "France"
-msgstr "Fran鏰"
+msgid "First sector of drive (MBR)"
+msgstr "Primer sector de la unitat (MBR)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Joystick"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "S'ha produ飔 un error en obrir %s per escriure: %s"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Res a fer"
+msgid "Use Unicode by default"
+msgstr ""
-#
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignaci autom鄑ica"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "el m騞ul del nucli GNU/Linux que gestiona aquest dispositiu"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No podeu utilitzar un sistema d'arxius xifrat per al punt de muntatge %s"
+msgid "Trying to rescue partition table"
+msgstr "S'est intentant recuperar la taula de particions"
-#
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "L'opci %s ha de ser un n鷐ero enter!"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Necessiteu un sistema de fitxers real (ext2/ext3, reiserfs, xfs o jfs) per a "
-"aquest punt de muntatge\n"
+"Entrades que heu d'emplenar:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers arrel"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "No es pot iniciar l'actualitzaci en directe!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum l騡ic LVM per al punt de muntatge %s"
+msgid "Name: "
+msgstr "Nom: "
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partici de programari RAID com a arrel (/).\n"
-"Aix no ho pot gestionar cap carregador d'arrencada sense una partici /"
-"boot.\n"
-"Per tant, assegureu-vos d'afegir una partici /boot"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milions de colors (24 bits)"
-#: ../../fsedit.pm:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partici amb el punt de muntatge %s\n"
+msgid "Allow all users"
+msgstr "Permet tots els usuaris"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"El nom de la impressora nom閟 pot constar de lletres, n鷐eros i el car郼ter "
-"de subratllat"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "La botiga oficial de MandrakeSoft"
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de comen鏰r amb una /"
+msgid "Resizing"
+msgstr "S'est canviant la mida"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
+msgid "Cable connection"
+msgstr "Connexi per cable"
-#: ../../fsedit.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
+msgid "User"
+msgstr "Usuari"
#: ../../fsedit.pm:1
#, c-format
@@ -1026,1273 +1828,256 @@ msgstr ""
"\n"
"Esteu d'acord en perdre totes les particions?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Error"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Fes una nova c騪ia de seguretat abans de restaurar (nom閟 per les c騪ies "
+"incrementals.)"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "servidor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Impressora en el port paral穕el \\/*%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Nom: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "with /usr"
-msgstr "amb /usr"
+msgid "mkraid failed"
+msgstr "L'mkraid ha fallat"
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "simple"
-msgstr "senzill"
+msgid "Button 3 Emulation"
+msgstr "Emulaci del bot 3"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "S'est formatant la partici %s"
+#
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sending files..."
+msgstr "S'estan enviant els fitxers..."
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produ飔 un error en desmuntar %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israeli (fon鑤ic)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "El muntatge de la partici %s en el directori %s ha fallat"
+msgid "access to rpm tools"
+msgstr "acc閟 a les eines rpm"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "S'est formatant la partici %s"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr "edita"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "S'est copiant %s"
+#
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Heu d'escollir/introduir una impressora/dispositiu!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "S'est formatant la partici %s"
+msgid "Permission problem accessing CD."
+msgstr "Hi ha hagut un problema de permisos en accedir al CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'est creant i formatant el fitxer %s"
+msgid "Phone number"
+msgstr "N鷐ero de tel鑖on"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
+
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No s com formatar %s amb el tipus %s"
+msgid "Printer name, description, location"
+msgstr "Nom de la impressora, descripci, ubicaci"
-#: ../../fs.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formataci de %s ha fallat"
+msgid "USA (broadcast)"
+msgstr "EUA (difusi)"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Feu clic a \"D'acord\" si voleu suprimir totes les dades i particions\n"
-"que hi ha en aquesta unitat de disc. Aneu amb compte perqu, un cop\n"
-"hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partici骪n"
-"del disc, incloent les dades de Windows.\n"
-"\n"
-"Feu clic a \"Cancel穕a\" per anul穕ar aquesta operaci sense perdre cap "
-"dada\n"
-"ni partici d'aquest disc."
+"Si us plau, trieu el\n"
+"suport per a la c騪ia."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instal穕ar la nova partici Linux\n"
-"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran\n"
-"recuperar!"
+msgid "Use Xinerama extension"
+msgstr "Utilitza l'extensi Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"No es pot tancar l'mkbootdisk correctament: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"El Yaboot 閟 un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
-"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si 閟 que els "
-"teniu\n"
-"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
-"instal穕en correctament; si no 閟 aix, per, en aquesta pantalla podeu\n"
-"afegir una entrada manualment. Aneu amb compte de triar els par鄊etres\n"
-"correctes.\n"
-"\n"
-"Les opcions principals del Yaboot s髇:\n"
-"\n"
-" * Missatge d'inicialitzaci: un senzill missatge de text que apareix abans\n"
-"de l'indicador d'arrencada.\n"
-"\n"
-" * Dispositiu d'arrencada: indica on voleu situar la informaci necess鄏ia\n"
-"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partici骪n"
-"bootstrap que contindr aquesta informaci.\n"
-"\n"
-" * Demora de l'Open Firmware: a difer鑞cia del LILO, amb el Yaboot hi ha\n"
-"dues demores disponibles. La primera d'elles es mesura en segons i, en "
-"aquest\n"
-"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-"\n"
-" * Temps m鄕im d'arrencada del nucli: aquest temps m鄕im 閟 similar a la\n"
-"demora d'arrencada del LILO. Despr閟 de seleccionar el Linux tindreu aquest\n"
-"temps (en d鑓imes de segon) abans que se seleccioni la descripci per "
-"defecte\n"
-"del nucli.\n"
-"\n"
-" * Habilita l'arrencada des de CD: si activeu aquesta opci podreu triar\n"
-"'C' per a CD al primer indicador de l'arrencada.\n"
-"\n"
-" * Habilitar l'arrencada OF: si activeu aquesta opci podreu triar 'N' per\n"
-"Open Firmware al primer indicador de l'arrencada.\n"
-"\n"
-" * SO per defecte: podeu seleccionar amb quin SO, per defecte, s'arrencar郳n"
-"quan la demora de l'Open Firmware venci."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "West Europe"
+msgstr "Europa de l'Oest"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
-"d'emerg鑞cia.\n"
-"\n"
-"Per a altres SO, l'entrada nom閟 consta d'una etiqueta i de la partici "
-"arrel.\n"
-"\n"
-"Per al Linux, hi ha unes quantes opcions possibles: \n"
-"\n"
-" * Etiqueta: 閟 nom閟 el nom a entrar en l'indicador del yaboot per\n"
-"seleccionar aquesta opci d'arrencada.\n"
-"\n"
-" * Imatge: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-"variaci de vmlinux amb una extensi.\n"
-"\n"
-" * Arrel: el dispositiu arrel o '/' per a la instal穕aci del Linux.\n"
-"\n"
-" * Addici: en maquinari Apple, l'opci d'addici de nuclis s'utilitza\n"
-"for鏰 sovint per auxiliar en la inicialitzaci de maquinari de v韉eo o per\n"
-"habilitar l'emulaci del bot del ratol de teclat per als 2n i 3r botons,\n"
-"que sovint no existeixen en un ratol Apple convencional. Alguns exemples\n"
-"d'aix s髇:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: aquesta opci es pot utilitzar per carregar els m騞uls inicials,\n"
-"abans que el dispostiu d'arrencada estigui disponible, o per carregar\n"
-"una imatge de disc RAM en una situaci d'arrencada d'emerg鑞cia.\n"
-"\n"
-" * Mida de l'Initrd: la mida per defecte del disc RAM sol ser de 4096 "
-"bytes.\n"
-"Si necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opci.\n"
-"\n"
-" * Lectura-Escriptura: normalment, la partici arrel '/' es tracta "
-"inicialment com\n"
-"de nom閟 lectura per permetre una comprovaci del sistema de fitxers abans\n"
-"que el sistema esdevingui \"viu\". Podeu substituir aquesta opci aqu.\n"
-"\n"
-" * Sense V韉eo: en cas que el maquinari de v韉eo d'Apple resulti "
-"especialment\n"
-"problem鄑ic, podeu seleccionar aquesta opci per arrencar en mode 'no-"
-"v韉eo',\n"
-"amb el suport nadiu per a frame buffer.\n"
-"\n"
-" * Per defecte: seleccioneu aquesta entrada com a selecci per defecte del\n"
-"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-"Aquesta opci tamb es ressaltar amb un '*' si premeu Tab per veure les\n"
-"seleccions d'arrencada."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"El DrakX detectar qualsevol dispositiu IDE en l'ordinador. Aix mateix, \n"
-"intentar trobar un o m閟 adaptadors SCSI PCI. Si troba un adaptador SCSI,\n"
-"el DrakX instal穕ar autom鄑icament el controlador adequat.\n"
-"\n"
-"Com que la detecci de maquinari no sempre troba tots els dispositius,\n"
-"el DrakX us demanar que confirmeu si hi ha un adaptador SCSI PCI. Feu clic\n"
-"a \"S韁" si sabeu segur que n'hi ha un instal穕at en l'ordinador. "
-"Apareixer郳n"
-"una llista de targetes SCSI perqu n'escolliu una. Feu clic a \"No\" si no "
-"en\n"
-"teniu cap. Si no n'esteu segurs, podeu mirar la llista de maquinari\n"
-"detectat en el vostre ordinador seleccionant \"Veure informaci del "
-"maquinari\"\n"
-"i fent clic a \"D'acord\". Examineu la llista de maquinari i feu clic sobre\n"
-"el bot \"D'acord\" per tornar a la pregunta sobre l'interf韈ie SCSI.\n"
-"\n"
-"Si heu de seleccionar l'adaptador manualment, el DrakX us preguntar si\n"
-"voleu confifurar-ne les opcions. Conv que deixeu que el DrakX comprovi\n"
-"el maquinari per inicialitzar les opcions especifiques d'algunes targetes.\n"
-"Aix sol funcionar b.\n"
-"\n"
-"Si el DrakX no pot comprovar les opcions que se li han de passar al "
-"controlador,\n"
-"us caldr proporcionar les opcions al controlador manualment. Consulteu la\n"
-"Guia de l'usuari (cap韙ol 3, en la secci \"Informaci obtinguda del "
-"maquinari\")\n"
-"per saber com treure aquesta informaci de la documentaci del maquinari,\n"
-"del lloc web del fabricant (si teniu acc閟 a Internet) o del Microsoft "
-"Windows\n"
-"(si el teniu al sistema)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake2 version %s"
+msgstr "Versi del Harddrake2 %s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Aqu se seleccionar el sistema d'impressi per al vostre ordinador. Altres\n"
-"sistemes operatius us n'oferiran un, per el Mandrake Linux n'ofereix dos.\n"
-"\n"
-" * \"pdq\" que vol dir \"print, don't queue\" (imprimeix, no facis cua), 閟\n"
-"l'opci escollida si teniu una connexi directa amb la impressora i voleu\n"
-"evitar aquelles cues d'impressi interminables, i no teniu impressores de \n"
-"xarxa. Nom閟 funcionar sobre xarxes molt senzilles i 閟 bastant lent per a\n"
-"xarxes en general. Escolliu \"pdq\" si 閟 la vostra primera incursi en GNU/"
-"Linux.\n"
-"Podeu canviar la vostra elecci despr閟 de la instal穕aci executant el \n"
-"PrinterDrake des del Centre de Control Mandrake, fent clic al bot \"Expert"
-"\".\n"
-"\n"
-" * \"CUPS\" vol dir \"Common Unix Printing System\" (Sistema d'impressi "
-"com鶿n"
-"de Unix), 閟 el millor a l'hora d'imprimir a la vostra impressora local i a "
-"la\n"
-"meitat del planeta. 蓅 senzill i pot actuar com a servidor o client per a "
-"l'antic\n"
-"sistema d'impressi \"lpd\". Per tant, 閟 compatible amb els sistemes "
-"anteriors.\n"
-"Pot fer moltes coses, per la configuraci b鄐ica es tant senzilla com la de "
-"\"pdq\".\n"
-"Si necessiteu CUPS per emular un servidor \"lpd\", heu d'habilitar el "
-"dimoni\n"
-"\"cups-lpd\". T una interf韈ie gr鄁ica per imprimir i escollir les "
-"opcions \n"
-"d'impressi."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "S'est copiant %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Choose color"
+msgstr "Escolliu un color"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Un cop configurats els par鄊etres generals del carregador de l'arrencada, \n"
-"es mostrar la llista d'opcions de c鄏rega que es veur en arrencar la "
-"m鄎uina.\n"
-"\n"
-"Si hi ha algun altre sistema operatiu instal穕at en el vostre ordinador, \n"
-"s'inclour autom鄑icament al men del carregador. Aqu podeu modificar les\n"
-"entrades del men d'arrencada. Seleccioneu una entrada i feu clic a \n"
-"\"Modifica\" per modificar-la o esborrar-la. \"Afegeix\" crea una nova "
-"entrada,\n"
-"i \"Fet\" avan鏰 cap al seg黣nt pas de la instal穕aci.\n"
-"Tamb 閟 possible que no vulgueu permetre a ning l'acc閟 a aquests "
-"sistemes\n"
-"operatius. En aquest cas, podeu suprimir les entrades corresponents, per騖n"
-"aleshores us caldr un disc d'arrencada per poder-los arrencar!"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Rep鷅lica Dominicana"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"El LILO i el grub s髇 carregadors de l'arrencada de GNU/Linux. Normalment,\n"
-"aquesta etapa 閟 totalment autom鄑ica. De fet, el DrakX analitza el \n"
-"sector d'arrencada i actua d'acord amb el que hi troba:\n"
-"\n"
-" * si troba un sector d'arrencada de Windows, el reempla鏰r amb un sector\n"
-"d'arrencada de grub/LILO. Per tant, sereu capa de carregar el GNU/Linux\n"
-"o un altre sistema operatiu.\n"
-"\n"
-" * si es troba un sector d'arrencada del grub o del LILO, el reempla鏰r郳n"
-"amb un de nou.\n"
-"\n"
-"Si t algun dubte, el DrakX us presentar un di鄉eg amb diverses opcions:\n"
-"\n"
-" * \"Carregador de l'arrencada\": teniu tres opcions:\n"
-"\n"
-" * \"GRUB\": si preferiu el grub (men de text).\n"
-"\n"
-" * \"LILO amb men gr鄁ic\": si preferiu el LILO amb una interf韈ie\n"
-"gr鄁ica.\n"
-"\n"
-" * \"LILO amb men de text\": si preferiu el LILO amb el seu men de\n"
-"text.\n"
-"\n"
-" * \"Dispositiu d'arrencada\": en la majoria de casos, no heu de canviar "
-"l'opci骪n"
-"per defecte (\"/dev/hda\"), per si ho preferiu, el carregador de "
-"l'arrencada\n"
-"pot instal穕ar-se en el segon disc dur (\"/dev/hdb\"), o fins i tot en un \n"
-"disquet (\"/dev/fd0\").\n"
-"\n"
-" * \"Temps d'espera abans de carregar la imatge per defecte\": quan es "
-"reinicia\n"
-"l'ordinador, aquest 閟 el temps de qu disposa l'usuari per escollir una "
-"entrada\n"
-"diferent de l'entrada per defecte en el men d'arrencada.\n"
-"\n"
-"Teniu en compte que si escolliu no instal穕ar un carregador de l'arrencada \n"
-"(seleccionant \"Cancel穕a\" aqu), heu d'estar segurs que teniu alguna "
-"manera\n"
-"d'arrencar el vostre sistema Mandrake Linux! Encara m閟, estigueu segurs de\n"
-"saber qu feu abans de canviar alguna de les opcions.\n"
-"\n"
-"Si feu clic al bot \"Avan鏰t\" d'aquest di鄉eg podreu modificar algunes\n"
-"opcions avan鏰des, reservades als usuaris experts."
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swazil鄋dia"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Aquesta 閟 la decisi m閟 important quant a la seguretat del vostre sistema\n"
-"GNU/Linux: heu d'introduir la contrasenya de l'usuari \"root\". El \"root\" "
-"閟\n"
-"l'administrador del sistema i 閟 l'鷑ic autoritzat a fer actualitzacions,\n"
-"afegir usuaris, canviar la configuraci del tot el sistema, etc. De fet,\n"
-"el \"root\" pot fer de tot! Per aix heu d'escollir una contrasenya que "
-"sigui\n"
-"dificil d'endevinar. DrakX us avisar si 閟 massa f郼il. Com veieu, podeu \n"
-"optar per no introduir cap contrasenya, per no 閟 gens prudent per una\n"
-"鷑ica ra: el fet d'arrencar GNU/Linux no fa que els vostres altres "
-"\"sistemes\n"
-"operatius\" estiguin lliures d'errors. Com que l'usuari \"root\" pot "
-"superar\n"
-"totes les limitacions i esborrar accidentalment totes les dades de "
-"qualsevol\n"
-"partici com a conseqncia d'accedir sense precaucions a les particions en "
-"si,\n"
-"閟 molt important que sigui dif韈il esdevenir \"root\".\n"
-"\n"
-"La contrasenya hauria de ser una mescla de car郼ters alfanum鑢ics i, com a \n"
-"m韓im, de 8 car郼ters de longitud. No escrigueu mai la contrasenya de \"root"
-"\"\n"
-"ja que 閟 molt f郼il comprometre el sistema si ho feu.\n"
-"\n"
-"De totes maneres, no feu la contrasenya massa llarga o complicada perqu鑌n"
-"heu de ser capa鏾s de recordar-la sense gaire esfor.\n"
-"\n"
-"La contrasenya no es mostrar per pantalla quan la teclegeu. Per tant, \n"
-"haureu d'escriure-la dues vegades per reduir la probabilitat d'errors\n"
-"en l'escriptura. Si, malauradament, feu el mateix error dues vegades, "
-"haureu\n"
-"d'usar aquesta contrasenya \"incorrecta\" el primer cop que us connecteu.\n"
-"\n"
-"En el mode Expert, se us preguntar si us voleu connectar a un servidor\n"
-"d'autentificaci, com ara NIS o LDAP.\n"
-"\n"
-"Si la vostra xarxa usa LDAP, NIS o l'autenticaci de domini Windows PDC,\n"
-"seleccioneu l'opci corresponent com a autenticaci. Si no ho sabeu, "
-"pregunteu\n"
-"al vostre administrador de la xarxa.\n"
-"\n"
-"Si el vostre ordinador no es connecta a cap xarxa administrada, haureu \n"
-"d'escollir \"Fitxers Locals\" per a l'autenticaci."
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port \"COM1\" en\n"
-"Windows s'anomena \"ttyS0\" en GNU/Linux."
+msgid "Please check if you are using CDRW media"
+msgstr "Marqueu aquesta opci si feu servir un suport CDRW"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"El DrakX generalment detecta el nombre de botons que t el vostre ratol. "
-"Si\n"
-"no pot, assumeix que teniu un ratol de dos botons i el configurar per "
-"emular\n"
-"el tercer bot. El DrakX detectar autom鄑icament si el ratol 閟 PS/2, "
-"s鑢ie o\n"
-"USB.\n"
-"\n"
-"Si voleu especificar un tipus diferent de ratoli seleccioneu el tipus \n"
-"apropiat de la llista.\n"
-"\n"
-"Si escolliu un ratol diferent del ratol per defecte, es mostrar una "
-"pantalla\n"
-"de test. Proveu els botons i la roda per verificar que la configuraci 閟\n"
-"correcta. Si el ratol no funciona b, premeu la barra espaiadora o la \n"
-"tecla de retorn per cancel穕ar i triar de nou.\n"
-"\n"
-"De vegades, la roda del ratol no es detecta autom鄑icament. En aquest cas,\n"
-"haureu de seleccionar-ho a la llista. Assegureu-vos de triar aquell que es\n"
-"correspongui amb el port on teniu connectat el ratol. Quan premeu \"D'acord"
-"\"\n"
-"apareixer la imatge d'un ratol perqu proveu tots els botons i els "
-"moviments."
+"Escolliu el disc dur que voleu buidar per instal穕ar la nova partici Linux\n"
+"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran\n"
+"recuperar!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"El primer pas 閟 triar l'idioma que voleu.\n"
-"\n"
-"Escolliu l'idioma que vulgueu per a la instal穕aci i per al sistema.\n"
-"\n"
-"Si feu clic al bot \"Avan鏰t\" podreu seleccionar altres idiomes que "
-"vulgueu\n"
-"instal穕ar a la vostra estaci de treball. S'instal穕aran els fitxers "
-"d'idioma\n"
-"especifics de la documentaci i de les aplicacions. Per exemple, si tindreu\n"
-"usuaris anglesos a la vostra m鄎uina, podeu triar el catal com a idioma "
-"principal\n"
-"des de l'arbre i, a la secci \"Avan鏰t\", marcar la casella \"Angl鑣|Regne "
-"Unit\".\n"
-"\n"
-"Cal remarcar que es poden instal穕ar m鷏tiples idiomes. Un cop hagueu "
-"seleccionat\n"
-"tots els idiomes que vulgueu , feu clic sobre el bot \"D'acord\" per "
-"continuar.\n"
-"\n"
-"Per canviar d'un idioma a un altre, podeu executar com a root l'ordre \n"
-"\"/usr/sbin/localedrake\" per canviar l'idioma de tot el sistema, o com a "
-"simple\n"
-"usuari per canviar nom閟 l'idioma per defecte d'aquest usuari."
+msgid " on parallel port \\#%s"
+msgstr " en port paral穕el \\/*%s"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr ""
-"Normalment, el DrakX selecciona el teclat correcte (segons l'idioma que\n"
-"hagueu escollit). Tanmateix, podr韊u tenir un teclat que no correspongu閟 "
-"exactament\n"
-"al vostre idioma, per exemple: si sou un su韘 que parla angl鑣, encara "
-"voldreu\n"
-"que el teclat sigui su韘. O si parleu angl鑣 per viviu al Quebec, us "
-"podeu \n"
-"trobar en la mateixa situaci. En tots dos casos, haureu de tornar a aquest "
-"pas\n"
-"de la instal穕aci i seleccionar un teclat adequat de la llista.\n"
-"\n"
-"Feu clic al bot \"M閟\" per veure la llista completa de teclats disponibles."
+"Utilitzeu les tecles %c i %c per seleccionar quina entrada esta ressaltada."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Ratol gen鑢ic de 2 botons"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Elimineu primer els volums l騡ics\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat m閟 d'una partici de Microsoft Windows en la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instal穕ar el nou\n"
-"sistema operatiu Mandrake Linux.\n"
-"\n"
-"Cada partici est identificada d'aquesta manera:\n"
-"\"Nom Linux\", \"Nom Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"n鷐ero d'unitat "
-"de \n"
-"disc\", \"n鷐ero de la partici骪" (per exemple, \"hda1\").\n"
-"\n"
-"\"Tipus d'unitat de disc\" 閟 \"hd\" si la vostre unitat de disc 閟 IDE i \n"
-"\"sd\" si 閟 SCSI.\n"
-"\n"
-"\"N鷐ero de la unitat de disc\" 閟 sempre una lletra despr閟 de \"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat prim鄏ia de disc"
-"\",\n"
-"una \"b\" significa \"unitat secund鄏ia de disc\", etc.\n"
-"\n"
-"\"Nom Windows\" 閟 la lletra de la vostra unitat de disc sota Windows (el "
-"primer\n"
-"disc o partici s'anomena \"C:\")."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "L'entrada ressaltada arrencara automaticament en %d segons."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakboot:1
+#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Ara 閟 quan heu de decidir quina(es) partici(ns) voleu utilitzar per\n"
-"instal穕ar el sistema Mandrake Linux. Si ja s'han definit les particions\n"
-"(en una instal穕aci anterior de GNU/Linux o mitjan鏰nt una altra eina de\n"
-"particionament), podeu utilitzar les particions existents. En cas contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
-"seleccionar\n"
-"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
-"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-" * \"Buida-ho tot\": aquesta opci suprimeix totes les particions que hi "
-"ha\n"
-"al disc dur seleccionat.\n"
-"\n"
-" * \"Assignaci autom鄑ica\": aquesta opci us permet crear autom鄑icament "
-"les\n"
-"particions \"Ext2\" i Intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\"M閟\": d髇a acc閟 a funcions addicionals:\n"
-"\n"
-" * \"Desa la taula de particions\": desa la taula de particions en un "
-"disquet.\n"
-"蓅 鷗il per a una posterior recuperaci de la taula de particions si fos "
-"necessari.\n"
-"Es recomana que efectueu aquesta operaci.\n"
-"\n"
-" * \"Restaura la taula de la particions\": permet restaurar una taula de "
-"particions\n"
-"que hagueu desat pr鑦iament en un disquet.\n"
-"\n"
-" * \"Recupera la taula de particions\": si la taula de particions est "
-"malmesa, podeu\n"
-"provar de recuperar-la utilitzant aquesta opci. Tingueu cura i recordeu que "
-"pot fallar.\n"
-"\n"
-" * \"Recarrega la taula de particions\": descarta tots els canvis fets i "
-"torna a \n"
-"carregar la taula de particions inicial.\n"
-"\n"
-" * \"Muntatge autom鄑ic de suports extra颾les\": si desseleccioneu "
-"aquesta opci fareu\n"
-"que els usuaris hagin de muntar i desmuntar les unitats de suports "
-"extra颾les com els \n"
-"disquets i els CD-ROM.\n"
-"\n"
-" * \"Auxiliar\": utilitzeu aquesta opci si voleu usar un auxiliar per "
-"particionar el \n"
-"vostre disc dur. Es recomana que l'utilitzeu si no teniu un bon coneixement "
-"sobre el\n"
-"particionament.\n"
-"\n"
-" * \"Desf閟\": utilitzeu aquesta opci per cancel穕ar els canvis.\n"
-"\n"
-" * \"Canvia entre mode normal/expert\": permet accions addicionals en les "
-"particions\n"
-"(tipus, opcions, format) i d髇a m閟 informaci.\n"
-"\n"
-" * \"Fet\": quan hagueu acabat de particionar el vostre disc dur, aquesta "
-"opci骪n"
-"desar els canvis al disc.\n"
-"\n"
-"Nota: podeu accedir a qualsevol opci mitjan鏰nt el teclat. Moveu-vos per "
-"les\n"
-"particions amb les tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"Quan seleccioneu una partici, podeu utilitzar:\n"
-"\n"
-" * Ctrl+C per crear una nova partici (quan se n'ha seleccionat una de "
-"buida)\n"
-"\n"
-" * Ctrl+D per suprimir una partici骪n"
-"\n"
-" * Ctrl+M per definir el punt de muntatge\n"
-"\n"
-"Per a m閟 informaci sobre els diferents sistemes de fitxers disponibles, "
-"llegiu\n"
-"el cap韙ol sobre ext2FS del \"Manual de Refer鑞cia\".\n"
-"\n"
-"Si esteu fent la instal穕aci en un ordinador PPC, potser voldreu crear una\n"
-"petita partici \"bootstrap\" HFS d'un m韓im d'1 MB per a 鷖 del carregador\n"
-"d'arrencada yaboot. Si decidiu fer-la una mica m閟 gran, per exemple de\n"
-"50 MB, us ser d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
-"del disc RAM per a situacions d'emerg鑞cia durant l'arrencada."
+"No s'ha pogut escriure /etc/sysconfig/bootsplash\n"
+"No s'ha trobat el fitxer."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ara 閟 el moment de triar el nivell de seguretat desitjat per a la m鄎uina.\n"
-"Com a norma general, com m閟 s'exposa un ordinador i com m閟 vitals s髇 les\n"
-"dades que s'hi emmagatzemen, m閟 alt ha de ser el nivell de seguretat.\n"
-"Tanmateix, un nivell alt de seguretat sovint comporta una disminuci de la\n"
-"facilitat d'鷖. Consulteu el cap韙ol \"msec\" del \"Manual de Refer鑞cia\"\n"
-"per obtenir m閟 informaci sobre el significat dels nivells de seguretat.\n"
-"\n"
-"Si no sabeu quin escollir, deixeu l'opci per defecte."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Acc閟 a Internet"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Ara esteu instal穕ant el Mandrake Linux, per 閟 probable que alguns "
-"paquets\n"
-"hagin estat actualitzats desde la data de llan鏰ment. Alguns errors poden "
-"haver\n"
-"estat resolts, i altres problemes de seguretat poden estar ja corregits. "
-"Per\n"
-"beneficiar-vos d'aquestes actualitzacions, us proposem de baixar-les "
-"d'Internet.\n"
-"Trieu \"S韁" si teniu una connexi a Internet operativa, o \"No\" si voleu\n"
-"instal穕ar-les m閟 tard.\n"
-"\n"
-"Si trieu \"S韁" apareixer una llista de llocs des d'on podeu baixar-vos "
-"les\n"
-"actualitzacions. Escolliu la ubicaci m閟 propera. Aleshores, apareixer "
-"un \n"
-"arbre de selecci de paquets: comproveu la selecci i premeu \"Instal穕a\" "
-"per\n"
-"baixar i instal穕ar els paquets seleccionats, o \"Cancel穕a\" per abandonar."
+"coordenada y de la caixa de text\n"
+"en nombre de car郼ters"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Per poder-les utilitzar, cal formatar les particions que s'acaben de "
-"definir\n"
-"(la formataci consisteix a crear-hi un sistema de fitxers).\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si 閟 aix, seleccioneu "
-"tamb閈n"
-"aquestes particions.\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que contenen el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), per no les que contenen "
-"dades\n"
-"que voleu conservar (habitualment, \"/home\").\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; despr閟 de la formataci, "
-"totes\n"
-"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"Feu clic a \"Cancel穕a\" si voleu seleccionar una altra partici per "
-"instal穕ar\n"
-"el nou sistema Mandrake Linux.\n"
-"\n"
-"Feu clic a \"Avan鏰t\" si voleu que es busquin sectors defectuosos del disc "
-"en\n"
-"alguna de les particions."
+"Per veure una llista de les opcions disponibles per a la impressora actual "
+"feu clic sobre el bot \"Imprimeix la llista d'opcions\"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ja ho teniu. S'ha completat la instal穕aci i el vostre sistema GNU/Linux "
-"est郳n"
-"preparat per fer-lo servir. Simplement premeu \"D'acord\" per reiniciar el "
-"sistema.\n"
-"Podeu iniciar GNU/Linux o Windows, el que volgueu (si teniu doble "
-"arrencada), aix韁n"
-"que l'ordinador s'hagi reiniciat.\n"
-"\n"
-"El bot \"Avan鏰t\" (nom閟 en mode expert) mostra dos botons m閟:\n"
-"\n"
-" * \"Genera un disquet d'instal穕aci autom鄑ica\": per crear un disquet \n"
-"d'instal穕aci que permetr fer una instal穕aci completa sense l'ajuda "
-"d'un\n"
-"operador, semblant a la instal穕aci que acabeu de configurar.\n"
-"\n"
-" Cal remarcar que es poden triar dues opcions diferents:\n"
-"\n"
-" * \"Repetici骪". Aquesta 閟 una instal穕aci parcialment automatitzada "
-"ja que\n"
-"el pas de particionar (i nom閟 aquest) es mant interactiu;\n"
-"\n"
-" * \"Automatitzada\". Instal穕aci completament automatitzada: el disc "
-"dur es\n"
-"reescriu completament i totes les dades es perden.\n"
-"\n"
-" Aquesta caracter韘tica 閟 for鏰 鷗il quan es fan instal穕acions a un bon "
-"grapat\n"
-"d'ordinadors similars. Mireu la secci d'instal穕aci autom鄑ica en la "
-"nostra web.\n"
-"\n"
-" * \"Desa la selecci de paquets\"(*): desa la selecci de paquets tal com\n"
-"s'han seleccionat abans en aquesta instal穕aci. Aleshores, quan feu una "
-"altra\n"
-"instal穕aci, inseriu el disquet a la unitat lectora i executeu la "
-"instal穕aci.\n"
-"Aneu a la pantalla d'ajuda prement la tecla F1, i teclegeu 'linux defcfg="
-"\"floppy\"'.\n"
-"\n"
-"(*) Necessiteu un disquet formatat en FAT (per crear-ne un sota GNU/Linux, "
-"escriviu\n"
-"\"mformat a:\")"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "S'estan habilitant els servidors..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "S'esta(n) imprimint la(es) p鄃ina(es) de prova..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ja hi ha una partici amb el punt de muntatge %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -2313,51 +2098,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Ara 閟 quan heu de decidir en quin lloc del vostre disc dur voleu "
"instal穕ar\n"
@@ -2453,211 +2236,123 @@ msgstr ""
"particions\"\n"
"de la \"Guia d'Iniciaci骪"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalment, se us demanar si voleu veure una interf韈ie gr鄁ica en "
-"arrencar.\n"
-"Noteu que aquesta pregunta se us far encara que no h鄃iu fet el test de la\n"
-"configuraci. 襜viament, respondreu \"No\" si l'ordinador ha de ser un\n"
-"servidor, o si no heu pogut completar la configuraci de la pantalla amb "
-"鑨it."
+msgid "Ukraine"
+msgstr "Ucra飊a"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "Aplicaci:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "External ISDN modem"
+msgstr "M騞em XDSI extern"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "Quina 閟 la vostra elecci? (predeterminat %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
msgstr ""
-"El GNU/Linux gestiona el temps en GMT (Greenwich Mean Time) i el tradueix a\n"
-"temps local d'acord amb el fus horari seleccionat. De tota manera 閟 "
-"possible\n"
-"desactivar-ho desmarcant \"Rellotge del maquinari en GMT\" de manera que el\n"
-"rellotge de la m鄎uina 閟 el mateix que el rellotge del sistema. Aix 閟\n"
-"convenient quan la m鄎uina tamb t instal穕at un altre sistema operatiu "
-"com \n"
-"Windows.\n"
+"La(es) p鄃ina(es) de prova s'ha(n) enviat a la impressora.\n"
+"Pot passar un cert temps abans no comenci la impressi.\n"
+"Estat de la impressi:\n"
+"%s\n"
"\n"
-"L'opci de \"Sincronitzaci autom鄑ica de l'hora\" regular autom鄑icament\n"
-"l'hora connectant-se a un servidor horari remot d'Internet. En la llista\n"
-"que es presenta, escolliu un servidor ubicat a prop vostre. Necessiteu una\n"
-"connexi a Internet operativa perqu aquesta caracter韘tica funcioni. El "
-"que\n"
-"far realment 閟 instal穕ar en la vostra m鄎uina un servidor horari, que "
-"poden\n"
-"usar opcionalment els altres ordinadors de la xarxa local."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr "di鄏ia"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "and one unknown printer"
msgstr ""
-"Ara podeu triar quins serveis voleu que s'inici飊 durant l'arrencada.\n"
"\n"
-"Aqu es llisten tots els serveis disponibles amb la instal穕aci actual.\n"
-"Reviseu-los amb cura i desmarqueu aquells que no seran necessaris sempre\n"
-"durant l'arrencada.\n"
-"\n"
-"Podeu obtenir una explicaci breu sobre un servei si el seleccioneu. Si no\n"
-"esteu segur de la utilitat d'un servei, el m閟 segur 閟 deixar el "
-"comportament\n"
-"per defecte.\n"
-"\n"
-"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
-"com\n"
-"a servidor: segurament no us interessar iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor. En general, seleccioneu nom閟 els serveis que realment "
-"necessiteu."
+"i una impressora desconeguda estan "
-#: ../../help.pm:1
+#
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Irlanda"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "versi del nucli"
+
+#
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Configuraci de restauraci "
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Aix 閟 correcte?"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2700,4334 +2395,4066 @@ msgstr ""
"Si voleu configurar la xarxa m閟 tard despr閟 de la instal穕aci, o si ja \n"
"heu acabat de configurar la connexi de xarxa, feu clic a \"Cancel穕a\"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Finalment, depenent de si heu seleccionat poder triar els paquets "
-"individuals\n"
-"o no, se us presentar un arbre amb tots els paquets classificats per grups "
-"i\n"
-"subgrups. Mentre navegueu per l'arbre, podeu seleccionar grups complets,\n"
-"subgrups o paquets individuals.\n"
-"\n"
-"Cada cop que seleccioneu un paquet de l'arbre, apareix una descripci a la\n"
-"dreta. Quan hagueu acabat la selecci de paquets, cliqueu a \"Instal穕a\",\n"
-"que iniciar el proc閟 d'instal穕aci. Depenent de la velocitat del vostre \n"
-"maquinari i del n鷐ero de paquets que necessitin ser instal穕ats, el proc閟\n"
-"pot trigar una bona estona en acabar. A la pantalla es mostrar una "
-"estimaci骪n"
-"del temps que durar la instal穕aci de tots els paquets, per tal ajudar-"
-"vos\n"
-"a decidir si teniu prou temps per gaudir d'una tassa de caf.\n"
-"\n"
-"Si heu seleccionat un paquet de servidor, intencionadament o perqu formava\n"
-"part d'un grup, se us demanar que confirmeu si realment voleu instal穕ar\n"
-"aquests servidors. Sota Mandrake Linux, qualsevol servidor instal穕at "
-"s'inicia\n"
-"per defecte quan el sistema arrenca. Tot i que fossin segurs i no "
-"tinguessin\n"
-"cap problema quan es va fer la distribuci, podria ser que es descobrissin\n"
-"forats de seguretat despr閟 que aquesta versi de Mandrake Linux es "
-"complet閟.\n"
-"Si no sabeu qu se suposa que fa un servei en particular o per qu s'est郳n"
-"instal穕ant, aleshores feu clic a \"No\". Si pitgeu \"S韁" s'instal穕aran\n"
-"els serveis llistats i s'iniciaran autom鄑icament per defecte.\n"
-"\n"
-"L'opci de \"Depend鑞cies autom鄑iques\" nom閟 deshabilita el di鄉eg "
-"d'advert鑞cia\n"
-"que apareix quan l'instal穕ador selecciona autom鄑icament un paquet. Aix騖n"
-"passa perqu s'ha determinat que es necessita safisfer una depend鑞cia d'un\n"
-"altre paquet per tal que la instal穕aci es completi amb 鑨it.\n"
-"\n"
-"La icona petita d'un disquet al final de la llista permet carregar una "
-"llista\n"
-"de paquets escollits en una instal穕aci anterior. Fent clic en aquesta "
-"icona\n"
-"el sistema us demanar que inseriu un disquet creat pr鑦iament al final "
-"d'una\n"
-"altra instal穕aci. Mireu el segon suggeriment de l'鷏tim pas per saber com "
-"crear\n"
-"aquest tipus de disquet."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ha arribat el moment d'especificar quins programes voleu instal穕ar en el\n"
-"sistema. Hi ha milers de paquets en el Mandrake Linux, i no se suposa que\n"
-"els conegueu tots de mem騬ia.\n"
-"\n"
-"Si esteu fent una instal穕aci est鄋dar des del CD-ROM, primer se us "
-"demanar郳n"
-"que especifiqueu els CD que teniu (nom閟 en mode Expert). Comproveu les "
-"etiquetes\n"
-"dels CD i marqueu els quadres corresponents als CD que teniu per fer la\n"
-"instal穕aci. Cliqueu \"D'acord\" quan vulgueu continuar.\n"
-"\n"
-"Els paquets estan ordenats en grups que corresponen a un 鷖 particular de "
-"la\n"
-"m鄎uina. Els grups tamb estan ordenats en quatre seccions:\n"
-"\n"
-" * \"Estaci de treball\": si voleu utilitzar l'ordinador com a estaci de \n"
-"treball, seleccioneu un o m閟 grups dels corresponents;\n"
-"\n"
-" * \"Desenvolupament\": si la vostra m鄎uina s'ha d'utilitzar per "
-"programar,\n"
-"escolliu el(s) grup(s) desitjat(s);\n"
-"\n"
-" * \"Servidor\": si l'ordinador s'ha d'utilitzar com a servidor, ser "
-"possible\n"
-"de seleccionar els serveis m閟 habituals que voleu instal穕ar en la vostra\n"
-"m鄎uina;\n"
-"\n"
-" * \"Entorn Gr鄁ic\": finalment, aqu 閟 on escollireu quin 閟 el vostre\n"
-"entorn gr鄁ic preferit. Heu de seleccionar com a m韓im un entorn gr鄁ic si\n"
-"voleu tenir una estaci de treball gr鄁ica.\n"
-"\n"
-"Moure el cursor per sobre d'un nom de grup far que es mostri una breu "
-"explicaci骪n"
-"d'aquest grup. Si desmarqueu tots els grups quan estigueu fent una "
-"instal穕aci骪n"
-"des de zero (en contraposici a una actualitzaci), se us presentar un "
-"di鄉eg \n"
-"proposant-vos diferents opcions per a una instal穕aci m韓ima:\n"
-"\n"
-" * \"Amb X\": instal穕ar els m韓ims paquets necessaris per tenir un entorn "
-"gr鄁ic\n"
-"funcional;\n"
-"\n"
-" * \"Amb Documentaci B鄐ica\": instal穕ar el sistema base i les utilitats "
-"b鄐iques\n"
-"amb la seva documentaci. Aquesta instal穕aci 閟 adequada per configurar un "
-"sistema\n"
-"servidor;\n"
-"\n"
-" * \"Instal穕aci Realment M韓ima\": s'instal穕ar el m韓im necessari per "
-"tenir un\n"
-"sistema Linux operatiu, nom閟 amb l韓ia d'ordres. Aquesta instal穕aci "
-"ocupa\n"
-"uns 65MB.\n"
-"\n"
-"Podeu marcar la casella de \"Selecci individual de paquets\", que 閟 for鏰 "
-"鷗il si\n"
-"coneixeu els diversos paquets que s'ofereixen per instal穕ar o si voleu "
-"tenir\n"
-"control total sobre el que s'instal穕ar.\n"
-"\n"
-"Si heu comen鏰t la instal穕aci en el mode \"Actualitzaci骪", podeu "
-"desmarcar \n"
-"tots els grups si voleu evitar que s'instal穕i cap paquet nou. Aix 閟 "
-"鷗il \n"
-"per reparar o actualitzar un sistema existent."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"La instal穕aci del Mandrake Linux est repartida en diversos CD-ROM. El "
-"DrakX\n"
-"sap si un paquet seleccionat es troba a un altre CD-ROM i expulsar el CD "
-"actual\n"
-"i us demanar que n'inseriu un altre a mesura que ho necessiti."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes s髇 les particions de Linux existents que s'han detectat a la\n"
-"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
-"l'auxiliar, \n"
-"s髇 adequades per a un 鷖 normal. Si feu algun canvi, com a m韓im heu de "
-"definir\n"
-"una partici arrel (\"/\"). No escolliu una partici massa petita, o no "
-"podreu\n"
-"instal穕ar prou programari. Si voleu emmagatzemar les dades en una altra "
-"partici, tamb haureu de seleccionar una \"/home\" (nom閟 si teniu m閟 "
-"d'una partici de\n"
-"Linux disponible).\n"
-"\n"
-"Per a la vostra informaci, cada partici est identificada d'aquesta "
-"manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"n鷐ero d'unitat de disc"
-"\",\n"
-"\"n鷐ero de la partici骪" (per exemple, \"hda1\").\n"
-"\n"
-"El \"Tipus d'unitat de disc\" 閟 \"hd\" si la vostre unitat de disc 閟 IDE i "
-"\"sd\" si 閟 SCSI.\n"
-"\n"
-"El \"N鷐ero de la unitat de disc\" 閟 sempre una lletra despr閟 d'\"hd\" o "
-"\"sd\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat prim鄏ia de disc"
-"\",\n"
-"una \"b\" significa \"unitat secund鄏ia de disc\", etc."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux 閟 un sistema multiusuari, i aix vol dir que cada usuari pot "
-"tenir\n"
-"les seves prefer鑞cies, els seus fitxers, etc. Podeu llegir la \"Guia de "
-"l'Usuari\"\n"
-"per aprendre m閟 coses. A difer鑞cia del \"root\", que 閟 l'administrador, \n"
-"als usuaris que afegiu aqu no se'ls permetr modificar res tret dels seus\n"
-"fitxers i la seva configuraci. Cal que tingueu com a m韓im un usuari "
-"normal.\n"
-"Aquest compte 閟 en el que haur韊u d'entrar per a un 鷖 habitual. Tot i que "
-"閟\n"
-"molt pr郼tic entrar en el sistema com a \"root\" cada dia, tamb pot ser "
-"molt\n"
-"perill髎. La m閟 petita errada podr韆 significar que el sistema deix閟 de "
-"funcionar.\n"
-"Si cometeu una gran errada com a usuari normal, podeu perdre algunes dades, "
-"per no\n"
-"tot el sistema.\n"
-"\n"
-"Primer, heu d'introduir el vostre nom real. Per suposat, aix no 閟 "
-"necessari, ja que\n"
-"podeu introduir el que volgueu. El DrakX agafar la primera paraula que heu "
-"entrat\n"
-"en la casella i la copiar en el \"Nom d'usuari\". Aquest 閟 el nom que "
-"utilitzar郳n"
-"aquest usuari per entrar en el sistema. El podeu canviar si voleu. Despr閟 "
-"cal que\n"
-"introdu飖 una contrasenya. Una contrasenya d'un usuari no privilegiat "
-"(habitual) \n"
-"no 閟 tant important com la del \"root\" des del punt de vista de la "
-"seguretat, \n"
-"per no hi ha cap ra per menystenir-ho: al cap i a la fi, els vostres "
-"fitxers\n"
-"estan en joc.\n"
-"\n"
-"Si cliqueu a \"Accepta l'usuari\", despr閟 en podreu afegir tants com "
-"volgueu. Afegiu\n"
-"un usuari per tothom qui hagi de fer servir l'ordinador. Quan hagueu acabat "
-"d'afegir\n"
-"tants usuaris com volgueu, seleccioneu \"Fet\".\n"
-"\n"
-"Si feu clic al bot \"Avan鏰t\" podreu canviar l'int鑢pret d'ordres (\"shell"
-"\") \n"
-"predeterminat de l'usuari seleccionat (bash per defecte).\n"
-"\n"
-"Un cop hagueu acabat d'afegir usuaris, se us proposar triar quin usuari "
-"entrar郳n"
-"autom鄑icament en el sistema en arrencar l'ordinador. Si us interessa "
-"aquesta \n"
-"caracter韘tica (i no us importa gaire la seguretat local), trieu l'usuari i "
-"el\n"
-"gestor de finestres desitjat i feu clic a \"S韁".\n"
-"Si no us interessa aquesta caracter韘tica, pitgeu \"No\"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Abans de continuar, haur韊u de llegir amb deteniment les cl鄒sules de la \n"
-"llic鑞cia. Aquesta cobreix la totalitat de la distribuci Mandrake Linux.\n"
-"Si no esteu d'acord amb tots els termes de la llic鑞cia, feu clic al bot骪n"
-"\"Refusa\" i la instal穕aci terminar immediatament. Per continuar amb la\n"
-"instal穕aci, feu clic al bot \"Accepta\"."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Tamb heu de formatar %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No es pot accedir als m騞uls del nucli corresponents al vostre nucli (no "
-"s'ha trobat el fitxer %s). Aix generalment vol dir que el vostre disquet "
-"d'arrencada no est sincronitzat amb el suport d'instal穕aci (si us plau, "
-"creeu un nou disquet d'arrencada)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produ飔 un error: no s'han trobat dispositius v鄉ids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produ飔 un error en llegir el fitxer %s"
-
-#: ../../install_any.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per utilitzar aquesta selecci de paquets que heu desat, arrenqueu la "
-"instal穕aci amb \"linux defcfg=floppy\""
+msgid "Wizard Configuration"
+msgstr "Auxiliar de configuraci"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Aquest disquet no est formatat amb FAT"
+msgid "Autoprobe"
+msgstr "Exploraci autom鄑ica"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
+msgid "Backup system files..."
+msgstr "Fes una c騪ia de seguretat dels fitxers del sistema..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "No es pot utilitzar la difusi sense un domini NIS"
-#: ../../install_any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Se suprimiran els seg黣nts paquets per poder actualitzar el sistema: %s\n"
-"\n"
-"\n"
-"Voleu realment suprimir aquests paquets?\n"
+msgid "Removing printer \"%s\"..."
+msgstr "S'est suprimint la impressora \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "No"
-msgstr "No"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Yes"
-msgstr "S"
-
-#: ../../install_any.pm:1
-#, fuzzy, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Heu seleccionat el(s) seg黣nt(s) servidor(s): %s\n"
-"\n"
-"\n"
-"Aquests servidors estan activats per defecte. No tenen cap problema de "
-"seguretat\n"
-"conegut, per se'n podrien trobar de nous. Si fos aix, haureu d'actualitzar-"
-"los\n"
-"el m閟 aviat possible.\n"
-"\n"
-"\n"
-"Voleu realment instal穕ar aquests servidors?\n"
-#
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Configuraci de l'av韘"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "Instal穕aci del SILO"
-
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bringing down the network"
-msgstr "S'est desactivant la xarxa"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "S'est activant la xarxa"
+msgid "Peru"
+msgstr "Per"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
+msgid " on device: %s"
+msgstr " en el dispositiu: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'auxiliar de particionament del DrakX ha trobat les solucions seg黣nts:"
+msgid "Remove Windows(TM)"
+msgstr "Elimina el Windows(TM)"
-#: ../../install_interactive.pm:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "No es pot trobar espai per a la instal穕aci"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Inicia l'X Font Server (aix 閟 necessari perqu l'XFree funcioni)."
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utiltzant 'w'"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
+"La majoria d'aquests valors s'han obtingut\n"
+"del vostre sistema actual. Podeu modificar-los si cal."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Seleccioneu el fitxer o directori de fonts i feu clic a 'Afegeix'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu m閟 d'un disc dur; en quin voleu instal穕ar el Linux?"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Esborra tot el disc"
+msgid "Cron not available yet as non-root"
+msgstr "El cron encara no 閟 disponible per a usuaris que no siguin root"
-#: ../../install_interactive.pm:1
+#
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
+msgid "System"
+msgstr "Sistema"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "Do you want to use this feature?"
+msgstr "Voleu utilitzar l'aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
msgstr ""
-"No hi ha cap partici FAT a la qual canviar la mida o que es pugui utilitzar "
-"com a loopback (o no hi queda prou espai)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
+"\n"
+"- Opcions:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat el redimensionament de la FAT: %s"
+msgid "Password required"
+msgstr "La contrasenya 閟 necess鄏ia"
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "S'est redimensionant la partici de Windows"
+msgid "%d minutes"
+msgstr "%d minuts"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Resizing"
-msgstr "S'est canviant la mida"
+msgid "Graphics card: %s"
+msgstr "Targeta gr鄁ica: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "partition %s"
-msgstr "partici %s"
+msgid "WebDAV transfer failed!"
+msgstr "La transfer鑞cia WebDAV ha fallat!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Quina mida voleu deixar per a la partici de Windows?"
+msgid "XFree configuration"
+msgstr "Configuraci de l'XFree"
-#
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCI!\n"
-"\n"
-"Tot seguit, el DrakX canviar la mida de la vostra partici de Windows. Aneu "
-"amb\n"
-"compte: aquesta operaci 閟 perillosa. Si encara no ho heu fet, sortiu de "
-"la\n"
-"instal穕aci, executeu l'Scandisk sota Windows (i potser tamb el defrag) i\n"
-"torneu a comen鏰r la instal穕aci. Feu tamb una c騪ia de seguretat de les\n"
-"vostres dades.\n"
-"Quan estigueu segur, premeu \"D'acord\"."
+msgid "Choose action"
+msgstr "Trieu una acci"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"La partici de Windows est massa fragmentada. Si us plau, reinicieu "
-"l'ordinador sota Windows i executeu l'eina \"defrag\". Llavors, torneu a "
-"comen鏰r la instal穕aci del Mandrake Linux."
+msgid "French Polynesia"
+msgstr "Polin鑣ia francesa"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Utilitza l'espai lliure de la partici de Windows"
-
-#: ../../install_interactive.pm:1
-#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partici. \n"
-"S'ha produ飔 l'error seg黣nt: %s"
+"El DrakX generalment detecta el nombre de botons que t el vostre ratol. "
+"Si\n"
+"no pot, assumeix que teniu un ratol de dos botons i el configurar per "
+"emular\n"
+"el tercer bot. El DrakX detectar autom鄑icament si el ratol 閟 PS/2, "
+"s鑢ie o\n"
+"USB.\n"
+"\n"
+"Si voleu especificar un tipus diferent de ratoli seleccioneu el tipus \n"
+"apropiat de la llista.\n"
+"\n"
+"Si escolliu un ratol diferent del ratol per defecte, es mostrar una "
+"pantalla\n"
+"de test. Proveu els botons i la roda per verificar que la configuraci 閟\n"
+"correcta. Si el ratol no funciona b, premeu la barra espaiadora o la \n"
+"tecla de retorn per cancel穕ar i triar de nou.\n"
+"\n"
+"De vegades, la roda del ratol no es detecta autom鄑icament. En aquest cas,\n"
+"haureu de seleccionar-ho a la llista. Assegureu-vos de triar aquell que es\n"
+"correspongui amb el port on teniu connectat el ratol. Quan premeu \"D'acord"
+"\"\n"
+"apareixer la imatge d'un ratol perqu proveu tots els botons i els "
+"moviments."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "A quina partici voleu canviar-li la mida?"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Funciona amb OKI 4w i winprinters compatibles."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partici de Windows"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"No hi ha cap partici FAT a la qual canviar la mida o que es pugui utilitzar "
-"com a loopback (o no hi queda prou espai)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Executa el sistema de so ALSA (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partici d'intercanvi en MB: "
+msgid "Installing driver for %s card %s"
+msgstr "S'est instal穕ant el controlador per a la targeta de %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Mida de la partici arrel en MB: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Heu tranferit la vostra impressora predeterminada anterior (\"%s\"). Voleu "
+"que tamb sigui la impressora predeterminada en el nou sistema d'impressi %"
+"s?"
-#: ../../install_interactive.pm:1
+#
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
+msgid "Enable Server"
+msgstr "Habilita el servidor"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partici voleu utilitzar per al Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ucra飊鑣"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la particio Windows per al loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"L'acc閟 a la xarxa no ha funcionat i no s'ha pogut iniciar. Comproveu la "
+"configuraci i el maquinari. Despr閟 proveu de configurar la impressora "
+"remota una altra vegada."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "No hi ha cap partici que es pugui utilitzar"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Inseriu el disquet d'arrencada utilitzat a la unitat %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use existing partitions"
-msgstr "Utilitza les particions existents"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "Adre鏰 de la xarxa local"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Elimina el Windows(TM)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"El vostre esc鄋er %s ha estat configurat.\n"
+"Ara podeu escanejar documents utilitzant \"XSane\" des de Multim鑔ia/Gr鄁ics "
+"en el men d'aplicacions."
-#
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partici FAT muntada en /boot/efi"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"No teniu cap partici d'intercanvi.\n"
+"Un cop configurats els par鄊etres generals del carregador de l'arrencada, \n"
+"es mostrar la llista d'opcions de c鄏rega que es veur en arrencar la "
+"m鄎uina.\n"
"\n"
-"Voleu continuar igualment?"
+"Si hi ha algun altre sistema operatiu instal穕at en el vostre ordinador, \n"
+"s'inclour autom鄑icament al men del carregador. Aqu podeu modificar les\n"
+"entrades del men d'arrencada. Seleccioneu una entrada i feu clic a \n"
+"\"Modifica\" per modificar-la o esborrar-la. \"Afegeix\" crea una nova "
+"entrada,\n"
+"i \"Fet\" avan鏰 cap al seg黣nt pas de la instal穕aci.\n"
+"Tamb 閟 possible que no vulgueu permetre a ning l'acc閟 a aquests "
+"sistemes\n"
+"operatius. En aquest cas, podeu suprimir les entrades corresponents, per騖n"
+"aleshores us caldr un disc d'arrencada per poder-los arrencar!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partici arrel.\n"
-"Per fer-ho, creeu una partici (o feu clic a una d'existent).\n"
-"Despr閟, trieu l'acci \"Punt de muntatge\" i doneu-li el valor '/'"
+msgid "System mode"
+msgstr "Mode de sistema"
-#: ../../install_interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Part del maquinari del vostre ordinador necessita controladors\n"
-"\"registrats\" per poder funcionar. Podeu trobar-ne informaci a: %s"
+"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
+"servidor d'impressi NetWare (tingueu en compte que pot ser diferent del "
+"nom\n"
+"TCP/IP del seu ordinador central), aix com el nom de la cua d'impressi de\n"
+"la impressora a la qual voleu accedir i el nom d'usuari i contrasenya si "
+"s髇\n"
+"necessaris."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Subm鄐cara de xarxa"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitats! La instal穕aci ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Retorn per tornar a arrencar.\n"
-"\n"
-"\n"
-"Trobareu la soluci als problemes coneguts d'aquesta versi del\n"
-"Mandrake Linux a la fe d'errates que hi ha a \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"La informaci sobre com configurar el vostre sistema est disponible a\n"
-"l'鷏tim cap韙ol d'instal穕aci de la Guia Oficial de l'Usuari del\n"
-"Mandrake Linux."
+msgid "Append"
+msgstr "Afegeix"
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Refresca la llista d'impressores (per veure totes les impressores CUPS "
+"remotes disponibles)"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Si us plau, llegiu atentament les cl鄒sules seg黣nts. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instal穕ar\n"
-"els CD seg黣nts. Premeu 'Rebutja' per continuar la instal穕aci骪n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llic鑞cia GPL o acords semblants. Cadascun d'aquests\n"
-"components es regeix per les cl鄒sules i condicions de la seva\n"
-"pr騪ia llic鑞cia espec韋ica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llic鑞cies espec韋iques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llic鑞cies impedeixen la transfer鑞cia, duplicaci (excepte amb\n"
-"la finalitat de fer-ne c騪ies de seguretat), redistribuci,\n"
-"enginyeria inversa, desassemblatge, decompilaci o modificaci del\n"
-"component. Qualsevol violaci de l'acord finalitzar immediatament\n"
-"els vostres drets sobre la llic鑞cia espec韋ica. Tret que la\n"
-"llic鑞cia espec韋ica us en garanteixi els drets, normalment no\n"
-"podreu instal穕ar els programes en m閟 d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribu飀or o editor del component.\n"
-"La transfer鑞cia a terceres parts i la c騪ia d'aquests components,\n"
-"incloent la documentaci, estan en general prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD seg黣nt pertanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intel穕ectual i de copyright aplicables als programes\n"
-"inform鄑ics.\n"
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Introducci骪n"
-"\n"
-"D'ara endavant, hom es referir al sistema operatiu i als diferents\n"
-"components disponibles en la distribuci Mandrake Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"per no estan restringits a, el conjunt de programes, m鑤odes, regles\n"
-"i documentaci relativa al sistema operatiu i els diferents\n"
-"components de la distribuci Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Acord de llic鑞cia\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document 閟 un\n"
-"acord de llic鑞cia entre la vostra persona i MandrakeSoft S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instal穕ar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant expl韈itament, i expressant el vostre acord a avenir-vos a\n"
-"les cl鄒sules i condicions d'aquesta Llic鑞cia. Si no esteu d'acord\n"
-"amb qualsevol part de la Llic鑞cia, no esteu autoritzat a instal穕ar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instal穕ar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les cl鄒sules i condicions d'aquesta\n"
-"Llic鑞cia, 閟 nul i finalitzar els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llic鑞cia, heu de destruir immediatament totes\n"
-"les c騪ies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentaci adjunta es subministren\n"
-"\"tal com s髇\", sense cap garantia, fins al punt perm閟 per la llei.\n"
-"MandrakeSoft S.A. no ser, sota cap circumst鄋cia, i fins al punt\n"
-"perm閟 per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per p鑢dua de\n"
-"negocis, interrupci de negocis, p鑢dues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre p鑢dua d'import鄋cia) que resulti de l'鷖 o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSI O UTILITZACI DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PA蟂OS\n"
-"\n"
-"Fins al punt perm閟 per la llei, MandrakeSoft S.A. o els seus\n"
-"distribu飀ors no seran, sota cap circumst鄋cia, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per p鑢dua de negocis, interrupci de negocis, p鑢dues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre p鑢dua d'import鄋cia) que\n"
-"resulti de la possessi i utilitzaci dels components de programari o\n"
-"de la seva desc鄏rega des d'un dels llocs de Mandrake Linux, que\n"
-"estiguin prohibides o restringides en alguns pa飐os per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, per no hi est郳n"
-"restringida, als potents components criptogr鄁ics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llic鑞cia GPL i llic鑞cies relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les cl鄒sules i condicions de la Llic鑞cia General\n"
-"P鷅lica de GNU, a la qual d'ara endavant hom s'hi referir com a\n"
-"\"GPL\", o de llic鑞cies similars. la majoria d'aquestes llic鑞cies\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les cl鄒sules i condicions\n"
-"de l'acord de llic鑞cia de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la lllic鑞cia d'un component s'ha d'adre鏰r\n"
-"al seu autor i no a MandrakeSoft.\n"
-"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
-"llic鑞cia GPL.La documentaci escrita per MandrakeSoft S.A. est regida per "
-"una\n"
-"llic鑞cia espec韋ica; consulteu la documentaci per a m閟\n"
-"informaci.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intel穕ectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intel穕ectual i de copyright aplicables als programes\n"
-"inform鄑ics.\n"
-"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
-"registrades de MandrakeSoft S.A.\n"
+"L'OSS (Sistema de So Obert) va ser la primera API de so. 蓅 una API "
+"independent del sistema operatiu (disponible en molts sistemes UNIX) per 閟 "
+"molt b鄐ica i limitada.\n"
+"Encara m閟, tots els controladors OSS reinventen la roda...\n"
"\n"
+"L'ALSA (Arquitectura Avan鏰da de So per a Linux) 閟 una arquitectura modular "
+"que\n"
+"funciona amb una 鄊plia varietat de targetes ISA, USB i PCI.\n"
"\n"
-"5. Lleis rectores \n"
+"Tamb proporciona una API molt m閟 funcional que la d'OSS.\n"
"\n"
-"Si qualsevol part d'aquest acord 閟 declarat nul, il穕egal o\n"
-"inaplicable per un tribunal, aquesta part s'exclour del contracte.\n"
-"Seguiu obligat, per, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les cl鄒sules i condicions d'aquesta Llic鑞cia es regeixen per les\n"
-"lleis de Fran鏰.\n"
-"Tots els litigis sobre les cl鄒sules d'aquesta llic鑞cia es dirimiran\n"
-"preferiblement fora dels tribunals. Com a 鷏tim recurs, el litigi es\n"
-"portar als tribunals competents de Par韘, Fran鏰.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb MandrakeSoft S.A.\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'est entrant en el pas '%s'\n"
-
-#
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Ajuda"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "torna a configurar"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "S'ha produ飔 un error en instal穕ar els paquets:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "S'ha produ飔 un error en ordenar els paquets:"
+"Per utilitzar ALSA, es pot triar entre:\n"
+"- l'antiga API compatible d'OSS\n"
+"- la nova API d'ALSA que proporciona moltes caracter韘tiques millorades per "
+"que necessita fer servir la lliberia ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Canvieu el CD-ROM!\n"
+"Si ho desitgeu, la instal穕aci autom鄑ica es pot\n"
+"automatitzar completament, per en aquest cas\n"
+"prendr el control del disc dur!\n"
+"(Aix est pensat per a la instal穕aci en un altre ordinador.)\n"
"\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i despr閟\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel穕a per no fer la instal穕aci des d'aquest CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Rebutja"
+"Potser preferireu repetir la instal穕aci.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Accept"
-msgstr "Accepta"
+msgid "Network printer \"%s\", port %s"
+msgstr "Impressora de xarxa \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Installing package %s"
-msgstr "S'est instal穕ant el paquet %s"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Si us plau, escolliu l'adaptador de xarxa que es connectar a la vostra "
+"xarxa d'鄏ea local."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Detalls"
+msgid "OK to restore the other files."
+msgstr "'D'acord' per restaurar els altres fitxers."
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Details"
-msgstr "Detalls"
+msgid "Please choose your keyboard layout."
+msgstr "Si us plau, seleccioneu la disposici del vostre teclat."
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Espereu si us plau, s'est preparant la instal穕aci..."
+msgid "Printer Device URI"
+msgstr "Dispositiu URI d'impressora"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Temps restant "
+msgid "Not erasable media!"
+msgstr "Aquest suport no es pot esborrar!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Estimating"
-msgstr "S'est estimant"
+msgid "Terminal-based"
+msgstr "Basat en terminal"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "S'est instal穕ant"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
+"S'est instal穕ant un sistema d'impressi amb el nivell de seguretat %s"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instal穕ar"
+msgid "The user name is too long"
+msgstr "El nom d'usuari 閟 massa llarg"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Instal穕aci m韓ima"
+msgid "Other OS (windows...)"
+msgstr "Un altre SO (Windows...)"
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Updating package selection"
-msgstr "S'est actualitzant la selecci de paquets"
+msgid "WebDAV remote site already in sync!"
+msgstr "El lloc remot WebDAV ja est sincronitzat!"
#
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Load/Save on floppy"
-msgstr "Carrega/Desa al disquet"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Install"
-msgstr "Instal穕a"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Mostra autom鄑icament els paquets seleccionats"
+msgid "Reading printer database..."
+msgstr "S'est llegint la base de dades d'impressores..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
+msgid "Generate auto install floppy"
+msgstr "Genera un disquet per a la instal穕aci autom鄑ica"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Aquest paquet s'ha d'actualitzar.\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja est instal穕at"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Aquest paquet 閟 obligatori; no es pot desseleccionar"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
+"\t\t nom d'usuari: %s\n"
+"\t\t en el cam: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets seg黣nts"
+msgid "Somalia"
+msgstr "Som鄉ia"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instal穕aran els paquets seg黣nts"
+#
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No open source driver"
+msgstr "No hi ha cap controlador conegut"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"No podeu seleccionar aquest paquet perqu no queda prou espai per instal穕ar-"
-"lo"
+"Aquest 閟 similar al nivell anterior, per el sistema est completament "
+"tancat i les caracter韘tiques de seguretat estan al m鄕im."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Import鄋cia: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mida: %d kB\n"
+msgid "New Caledonia"
+msgstr "Nova Caled騨ia"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versi: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocol europeu (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
+msgid "Video mode"
+msgstr "Mode de v韉eo"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Paquet incorrecte"
+msgid "Please enter your email address below "
+msgstr "Si us plau, entreu la vostra adre鏰 electr騨ica"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Altres"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Configuraci de xarxa"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Seg黣nt ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Selecci individual de paquets"
+msgid "New size in MB: "
+msgstr "Nova mida en MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Selecci del grup de paquets"
+msgid "Partition table type: %s\n"
+msgstr "Tipus de taula de particions: %s\n"
-#: ../../install_steps_gtk.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"El vostre sistema est baix de recursos; podeu tenir algun problema en\n"
-"instal穕ar el Mandrake Linux. Si aix passa, podeu provar d'instal穕ar-lo "
-"en\n"
-"mode text. Per fer-ho, premeu 'F1' en arrencar des del CD-ROM i escriviu "
-"'text'."
+msgid "Authentication Windows Domain"
+msgstr "Autenticaci en el domini de Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Desa la selecci de paquets"
+msgid "US keyboard"
+msgstr "Teclat Estats Units"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Autom鄑ica"
+msgid "Buttons emulation"
+msgstr "Emulaci dels botons"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Repeteix"
+msgid ", network printer \"%s\", port %s"
+msgstr ", impressora de xarxa \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Si ho desitgeu, la instal穕aci autom鄑ica es pot\n"
-"automatitzar completament, per en aquest cas\n"
-"prendr el control del disc dur!\n"
-"(Aix est pensat per a la instal穕aci en un altre ordinador.)\n"
"\n"
-"Potser preferireu repetir la instal穕aci.\n"
+"Activitats del Drakbackup a trav鑣 de cinta:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instal穕aci autom鄑ica"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" Hi ha hagut un problema en la connexi FTP: No ha estat possible enviar els "
+"fitxers de la c騪ia de seguretat per FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Arrel"
+msgid "Sending Speed:"
+msgstr "S'estan enviant els fitxers..."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "Halt bug"
msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "S'est creant el diquet d'instal穕aci autom鄑ica"
+msgid "Mail alert configuration"
+msgstr "Configuraci de l'alerta de correu"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bosnian"
+msgstr "Bosni"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Release: "
+msgstr "Llan鏰ment: "
+
+#
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection speed"
+msgstr "Velocitat de la connexi"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Potser us caldr canviar el dispositiu d'arrencada Open Firware per\n"
-"habilitar el carregador de l'arrencada. Si no veieu l'indicador del\n"
-"carregador de l'arrencada en tornar a arrencar, premeu\n"
-"Command-Option-O-F en tornar a arrencar i introdu飖:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Despr閟, escriviu: shut-down\n"
-"En l'arrencada seg黣nt heu de veure l'indicador del carregador de "
-"l'arrencada."
+"Si us plau, entreu el nom de dispositiu de l'enregistradora de CD\n"
+" ex: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ha fallat la instal穕aci del carregador de l'arrencada. S'ha produ飔 "
-"l'error seg黣nt:"
+msgid "Namibia"
+msgstr "Nam韇ia"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "S'est instal穕ant el carregador de l'arrencada"
+msgid "Database Server"
+msgstr "Servidor de base de dades"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-"S'ha produ飔 un error en instal穕ar l'aboot. \n"
-"Voleu intentar igualment la instal穕aci encara que aix destrueixi la "
-"primera partici?"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "No es pot afegir una partici a un RAID _formatat_ md%d"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
+#: ../../Xconfig/card.pm:1
+#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Sembla que teniu un ordinador OldWorld o una m鄎uina \n"
-"desconeguda; el carregador d'arrencada yaboot no funcionar.\n"
-"La instal穕aci continuar, per haureu d'utilitzar el BootX\n"
-"per arrencar l'ordinador"
+"La vostra targeta pot tenir acceleraci 3D de maquinari, per nom閟 amb "
+"l'Xfree %s,\n"
+"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
+"PENJAR.\n"
+"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "S'est preparant el carregador de l'arrencada..."
+msgid "Please wait, setting security options..."
+msgstr "Espereu si us plau, s'estan configurant les opcions de seguretat..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Contrasenya de l'administrador del domini"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Desconegut|CPH05X (bt878) [molts venedors]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Nom d'usuari de l'administrador del domini"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Executa la interf韈ie gr鄁ica en iniciar el sistema"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Windows Domain"
-msgstr "Domini de Windows"
+msgid "hourly"
+msgstr "cada hora"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autenticaci en el domini de Windows"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Per tal que funcioni en un W2K PDC, segurament haureu de fer que "
-"l'administrador executi \"C:\\>net localgroup 'Acc閟 compatible amb vesions "
-"anteriors a Windows 2000' everyone /add\" i que reinici el servidor.\n"
-"Tamb necessitareu el nom d'usuari i la contrasenya de l'administrador del "
-"domini per poder connectar la m鄎uina al domini de Windows(TM).\n"
-"Si la xarxa encara no est operativa, el DrakX provar de connectar-se al "
-"domini despr閟 del pas de configuraci de la xarxa.\n"
-"Si aquesta configuraci fall閟 per algun motiu i l'autenticaci no "
-"funcion閟, executeu 'smbpasswd -j DOMINI -U USUARI%CONTRASENYA' passant com "
-"a par鄊etres el domini Windows en q黣sti i el nom d'usuari i la contrasenya "
-"de l'administrador, despr閟 que arrenqui el sistema.\n"
-"L'ordre 'wbinfo -t' comprovar si els secrets de l'autenticaci s髇 prou "
-"bons."
+msgid " Successfuly Restored on %s "
+msgstr " restaurades amb 鑨it en %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "Servidor NIS"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "Domini del NIS"
+msgid "Antigua and Barbuda"
+msgstr "Antigua i Barbuda"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Authentication NIS"
-msgstr "Autenticaci NIS"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Spanish"
+msgstr "Espanyol"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
+msgid "Start"
+msgstr "Inicia"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
#
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autenticaci LDAP"
+msgid "Configuring applications..."
+msgstr "S'estan configurant les aplicacions..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Normal modem connection"
+msgstr "Connexi normal per m騞em"
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Local files"
-msgstr "Fitxers locals"
-
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Authentication"
-msgstr "Autenticaci"
+msgid "File Selection"
+msgstr "Selecci de fitxers"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Aquesta contrasenya 閟 massa curta (ha de tenir com a m韓im %d car郼ters)"
+"Quina configuraci XDSI preferiu?\n"
+"\n"
+"* La configuraci antiga usa isdn4net. Cont eines molt\n"
+" potents, per 閟 dif韈il de configurar, i no 閟 est鄋dard.\n"
+"\n"
+"* La nova configuraci 閟 m閟 f郼il d'entendre, m閟\n"
+" est鄋dard, per t menys eines.\n"
+"\n"
+"Nosaltres recomanen la nova configuraci senzilla (isdn-light).\n"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "No password"
-msgstr "Sense contrasenya"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Set root password"
-msgstr "Estableix la contrasenya de root"
+msgid "Run config tool"
+msgstr "Executa l'eina de configuraci"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Bootloader installation"
+msgstr "Instal穕aci del carregador de l'arrencada"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Serveis: %d activats per %d registrats"
+msgid "Root partition size in MB: "
+msgstr "Mida de la partici arrel en MB: "
-#
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Services"
-msgstr "Serveis"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Aquest paquet 閟 obligatori; no es pot desseleccionar"
-#
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "System"
-msgstr "Sistema"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Port"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Carregador de l'arrencada a utilitzar"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Arrel"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "inhabilita"
+msgid "Etherboot ISO image is %s"
+msgstr "La imatge ISO per a Etherboot 閟 %s"
#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "Activa'l ara"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Tallafoc/Encaminador"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) 閟 un servidor de noms de domini (DNS) que s'utilitza per "
+"convertir noms d'ordinadors centrals en adreces IP."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Security"
-msgstr "Seguretat"
+msgid "Disconnect..."
+msgstr "Desconnecta..."
-#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Nivell de seguretat:"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
#
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Network"
-msgstr "Xarxa"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Interf韈ie de la xarxa"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "Interf韈ie gr鄁ica a l'inici"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Hardware"
-msgstr "HardDrake"
+msgid "Report"
+msgstr "Informa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "Targeta de TV"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No s'ha detectat cap targeta de so. Proveu amb \"harddrake\" despr閟 de la "
-"instal穕aci"
+msgid "level"
+msgstr "nivell"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Executeu \"sndconfig\" despr閟 de la instal穕aci per configurar la targeta "
-"de so"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Teniu una targeta de so ISA?"
+"Cada incident ser investigat per un expert t鑓nic qualificat de "
+"MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound card"
-msgstr "Targeta de so"
+msgid "Package Group Selection"
+msgstr "Selecci del grup de paquets"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restaura mitjan鏰nt el protocol de xarxa: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "No printer"
-msgstr "Cap impressora"
+msgid "You can configure each parameter of the module here."
+msgstr "Ara podeu configurar cada par鄊etre del m騞ul."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Printer"
-msgstr "Impressora"
+msgid "Choose the resolution and the color depth"
+msgstr "Escolliu la resoluci i la profunditat de color"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Mouse"
-msgstr "Ratol"
+msgid "Emulate third button?"
+msgstr "Voleu emular el tercer bot?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Fus horari"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"No podeu crear una nova partici骪n"
+"(perqu heu arribat al m鄕im nombre de particions prim鄏ies).\n"
+"Esborreu primer una partici prim鄏ia i creeu una partici ampliada."
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Teclat"
+msgid "Mount"
+msgstr "Munta"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Summary"
-msgstr "Resum"
+msgid "Creating auto install floppy"
+msgstr "S'est creant el disquet d'instal穕aci autom鄑ica"
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "Servidor NTP"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Instal穕a actualitzacions del sistema"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronitzaci autom鄑ica de la hora (usant NTP)"
+msgid "text box height"
+msgstr "al玎ria de la caixa de text"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador est regulat per GMT"
+msgid "State"
+msgstr "Estat"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "En quina zona hor鄏ia us trobeu?"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Voleu configurar la impressi?"
+msgid "Be sure a media is present for the device %s"
+msgstr "Assegureu-vos que hi ha un suport al dispositiu %s"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "No es pot bifurcar: %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Enable multiple profiles"
+msgstr "Habilita perfils m鷏tiples"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"S'est contactant amb la r鑠lica per obtenir la llista dels paquets "
-"disponibles..."
+"Aquestes opcions poden fer c騪ia de seguretat i restaurar tots els fitxers "
+"del directory /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu una r鑠lica des de la qual aconseguir els paquets"
+msgid "Local printer"
+msgstr "Impressora local"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr "S'han restaurat els fitxers..."
#
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"S'est contactant amb el servidor Mandrake Linux per obtenir la llista de "
-"r鑠liques disponibles..."
+msgid "Package selection"
+msgstr "Selecci de paquets"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr "Maurit鄋ia"
+
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Ara teniu l'oportunitat de baixar paquets actualitzats. Aquests paquets\n"
-"han estat publicats despr閟 del llan鏰ment de la distribuci. Poden "
-"contenir\n"
-"actualitzacions de seguretat o correccions d'errors.\n"
+"Podeu conservar la configuraci actual i assumir que ja heu definit un "
+"servidor DHCP. En aquest cas, verifiqueu que s'ha llegit correctament la "
+"xarxa de classe C que utilitzeu per a la vostra xarxa local. No es "
+"reconfigurar ni es modificar la configuraci del servidor DHCP.\n"
"\n"
-"Per baixar aquests paquets, necessitareu tenir una connexi a Internet\n"
-"operativa.\n"
+"L'entrada DNS per defecte 閟 el servidor de noms amb mem騬ia cau que s'ha "
+"configurat al tallafoc. Podeu substituir-lo, per exemple, per la IP del DNS "
+"del vostre prove飀or d'acc閟.\n"
+"\n"
+"Alternativament, podeu reconfigurar la interf韈ie i (re)configurar un "
+"servidor DHCP per a 鷖 propi.\n"
"\n"
-"Voleu instal穕ar aquestes actualitzacions?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inseriu el disquet d'Actualitzaci de M騞uls a la unitat %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inseriu el disquet d'arrencada utilitzat a la unitat %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "Configuraci posterior a la instal穕aci"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"S'est instal穕ant el paquet %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "S'est preparant la instal穕aci"
+"No s'ha trobat cap impressora! Per instal穕ar-ne una manualment entreu el "
+"dispositiu/fitxer a la l韓ia d'entrada (Ports Paral穕el: /dev/lp0, /dev/lp1, "
+"etc., equivalents a LPT1:, LPT2:, etc.; 1a impresora USB: /dev/usb/lp0, 2a "
+"impressora USB: /dev/usb/lp1, etc.)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
+msgid "All primary partitions are used"
+msgstr "S'utilitzen totes les particions prim鄏ies"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Si teniu tots els CD de la llista de sota, feu clic a 'D'acord'.\n"
-"Si no teniu cap d'aquests CD, feu clic a 'Cancel穕a'.\n"
-"Si nom閟 falten alguns CD, desseleccioneu-los i feu clic a 'D'acord'."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Tots"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instal穕aci realment m韓ima (especialment no urpmi)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Amb la documentaci b鄐ica (recomanat!)"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "With X"
-msgstr "Amb X"
+"Despr閟 d'aix, 閟 recomanable que reinicieu l'entorn X per\n"
+"evitar problemes deguts al canvi de nom de l'ordinador central."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
-"No heu seleccionat cap grup de paquets.\n"
-"Escolliu la instal穕aci m韓ima que voleu:"
-
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Type of install"
-msgstr "Tipus d'instal穕aci"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "La mida seleccionada 閟 superior a la disponible"
+"Detecci i configuraci autom鄑ica de maquinari en iniciar l'ordinador."
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Inseriu un disquet amb la selecci de paquets"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Configuraci del servidor dhcpd"
-#
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "S'est carregant des del disquet"
+msgid "Configuring IDE"
+msgstr "S'est configurant l'IDE"
#
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Selecci de paquets"
+msgid "Network functionality not configured"
+msgstr "La funcionalitat de xarxa no ha estat configurada"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Save on floppy"
-msgstr "Desa al disquet"
+msgid "Configure module"
+msgstr "Configura el m騞ul"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Carrega des del disquet"
+msgid "Cocos (Keeling) Islands"
+msgstr "Illes Cocos (Keeling)"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Si us plau, carregueu o deseu la selecci de paquets en el disquet.\n"
-"El format 閟 el mateix que en els disquets generats d'instal穕aci "
-"autom鄑ica."
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Connecta't a Internet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "You'll need to reboot before the modification can take place"
msgstr ""
-"Al vostre sistema no li queda prou espai per a la instal穕aci o "
-"actualitzaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "S'estan cercant els paquets disponibles..."
+"Us caldr tornar a arrencar per tal que les modificacions tinguin efecte"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "S'estan cercant els paquets a actualitzar"
+msgid "Provider phone number"
+msgstr "N鷐ero de tel鑖on del prove飀or"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "S'estan cercant els paquets ja instal穕ats..."
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Nom de l'ordinador central"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"S'estan cercant els paquets disponibles i reconstruint la base de dades "
-"d'rpm..."
+msgid "Armenia"
+msgstr "Arm鑞ia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou espai d'intercanvi per completar la instal穕aci; si us plau, "
-"afegiu-ne"
+msgid "Fiji"
+msgstr "Fiji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"蓅 impossible de comprovar el sistema de fitxers %s. Voleu reparar els "
-"errors? (Vigileu, podr韊u perdre dades.)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
+msgid "Second floppy drive"
+msgstr "Segona unitat de disquet"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
+msgid "About Harddrake"
+msgstr "Quant al Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid "Drive capacity"
msgstr ""
-"Us caldr tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"No hi ha prou espai lliure per un 1MB de bootstrap! La instal穕aci "
-"continuar, per per iniciar el sistema necessitareu crear la partici de "
-"bootstrap amb el DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
+"Inseriu un disquet a la unitat\n"
+"Se'n perdran totes les dades"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
+msgid "Size: %s"
+msgstr "Mida: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No partition available"
-msgstr "No hi ha particions disponibles"
+msgid "Control and Shift keys simultaneously"
+msgstr "Tecles de Control i de Maj鷖cules simult鄋iament"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Configuring IDE"
-msgstr "S'est configurant l'IDE"
+msgid "secondary"
+msgstr "secundari"
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "View Backup Configuration."
+msgstr "Visualitza la configuraci de la c騪ia de seguretat"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "No password"
+msgstr "Sense contrasenya"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulaci del bot 3"
+msgid "Nigeria"
+msgstr "Nig鑢ia"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulaci del bot 2"
+msgid "There is no existing partition to use"
+msgstr "No hi ha cap partici que es pugui utilitzar"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Buttons emulation"
-msgstr "Emulaci dels botons"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"\n"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Si us plau, seleccioneu el port s鑢ie a qu est connectat el ratol."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Per imprimir a una impressora TCP o Socket, heu d'indicar el nom de xarxa o "
+"la IP de la impressora i, opcionalment, el n鷐ero de port. En els servidors "
+"HP JetDirect el n鷐ero del port normalment 閟 el 9100, en els altres pot "
+"variar. Mireu el manual del vostre maquinari."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Port del ratol"
+msgid "Hard drive information"
+msgstr "Informaci del disc dur"
-#
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratol."
+msgid "Russian"
+msgstr "Rus"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Clau de xifratge"
+msgid "Jordan"
+msgstr "Jord鄋ia"
#
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Actualitza"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Es tracta d'una instal穕aci o d'una actualitzaci?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Instal穕a/Actualitza"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Aquesta 閟 la llista completa de teclats disponibles"
+msgid "Hide files"
+msgstr "Fitxers ocults"
#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Si us plau, seleccioneu la disposici del vostre teclat."
-
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Quit"
-msgstr "Surt"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "License agreement"
-msgstr "Acord de llic鑞cia"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "S'ha produ飔 un error"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Detecta autom鄑icament les impressores connectades a aquesta m鄎uina"
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-" <Tab>/<Alt-Tab> entre elements | <Espai> selecciona | <F12> pant. seg黣nt"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instal穕aci del Mandrake Linux %s"
+"No teniu instal穕at el XawTV!\n"
+"\n"
+"\n"
+"Si teniu una targeta de TV per el DrakX no l'ha detectada (no hi ha el "
+"m騞ul\n"
+"bttv o el saa7134 a \"/etc/modules\") o no heu instal穕at xawtv,\n"
+"si us plau envieu els resultats de \"lspcidrake -v -f\"\n"
+"a \"install\\@mandrakesoft.com\" amb l'assumpte \"undetected TV card\".\n"
+"\n"
+"\n"
+"El podeu instal穕ar teclejant \"urpmi xawtv\" com a root, en la consola."
-#: ../../install_steps.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available"
+msgid "Sorry, no floppy drive available"
msgstr "No hi ha cap unitat de disquet disponible"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
+msgid "Bolivia"
+msgstr "Bol韛ia"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-"Alguns paquets importants no s'han instal穕at correctament.\n"
-"La vostra unitat de CD-ROM, o b el CD-ROM, s髇 defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instal穕at mitjan鏰nt \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
+"Configureu el vostre servidor Windows per tal que la impressora estigui "
+"disponible sota el protocol IPP i configureu la impressi en aquest "
+"ordinador amb el tipus de connexi \"%s\" en el Printerdrake.\n"
+"\n"
-#: ../../install_steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
+msgid "Bad package"
+msgstr "Paquet incorrecte"
-#: ../../install_steps.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
-"S'ha produ飔 un error, per no s com gestionar-lo correctament.\n"
-"Si continueu, 閟 sota la vostra responsabilitat."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Espereu si us plau"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "D'acord"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Fi"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "B鄐ic"
+"Transformeu el vostre ordinador en un potent servidor Linux amb nom閟 uns "
+"quants clics del ratol: servidor Web, correu electr騨ic, tallafoc, "
+"encaminador, servidor de fitxers i d'impressi..."
-#: ../../interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avan鏰t"
-
-#
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, fuzzy, c-format
-msgid "Remove"
-msgstr "Esborra la llista"
+msgid "DrakSec Basic Options"
+msgstr "Opcions b鄐iques del DrakSec"
-#
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Modify"
-msgstr "Modifica"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Nota: si teniu una targeta de so ISA PnP, haureu de fer servir el programa "
+"sndconfig. Nom閟 cal que teclegeu \"sndconfig\" a la consola."
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add"
-msgstr "Afegeix"
+msgid "Romania"
+msgstr "Romania"
#
-#: ../../interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose a file"
-msgstr "Trieu un fitxer"
+msgid "choose device"
+msgstr "escolliu un dispositiu"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Aqu podeu triar la tecla o la combinaci de tecles que \n"
-"permetran canviar entre diferents disposicions de teclat\n"
-"(p.ex.: llatina i no llatina)"
+msgid "Canada"
+msgstr "Canad"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Tecla de \"Windows\" Dreta"
+msgid "Remove from LVM"
+msgstr "Elimina de l'LVM"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Tecla de \"Windows\" Esquerra"
+msgid "Timezone"
+msgstr "Fus horari"
#: ../../keyboard.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "tecla de \"Men鶿""
+msgid "German"
+msgstr "Alemany"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Tecles d'Alternativa i de Maj鷖cules simult鄋iament"
+msgid "Next ->"
+msgstr "Seg黣nt ->"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Tecles de Control i d'Alternativa simult鄋iament"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "CapsLock key"
-msgstr "Tecla de Fixaci de Maj鷖cules"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"蓅 possible que aquesta partici sigui\n"
+"una partici de Controladors;\n"
+"閟 millor que no la toqueu.\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Tecles de Control i de Maj鷖cules simult鄋iament"
+msgid "Guinea-Bissau"
+msgstr "Guinea Bissau"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Les dues tecles de Maj鷖cules simult鄋iament"
+msgid "Horizontal refresh rate"
+msgstr "Velocitat de refresc horitzontal"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Tecla d'Alternativa Gr鄁ica"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"No es pot anul穕ar el punt de muntatge, perqu aquesta partici骪n"
+"s'utilitza per al loopback. Elimineu primer el loopback"
-#
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslau (llat)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"La configuraci de xarxa feta durant la instal穕aci no s'ha pogut iniciar "
+"ara. Comproveu si la xarxa es torna accessible despr閟 de reiniciar el "
+"sistema i corregiu la configuraci utilitzant el Centre de Control Mandrake, "
+"a la secci \"Xarxa & Internet\"/\"Connexi骪", i despr閟 configureu la "
+"impressora, tamb usant el Centre de Control Mandrake, secci \"Maquinari\"/"
+"\"Impressores\""
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila num鑢ica\" QWERTY"
+msgid "USB controllers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Teclat Estats Units (internacional)"
+msgid "What norm is your TV using?"
+msgstr "Quina norma segueix el vostre televisor?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "US keyboard"
-msgstr "Teclat Estats Units"
+msgid "Type:"
+msgstr "Tipus:"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Teclat Regne Unit"
+msgid "Share name"
+msgstr "Nom de compartici"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ucra飊鑣"
+msgid "enable"
+msgstr "habilita"
-#: ../../keyboard.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"S'est contactant amb el servidor Mandrake Linux per obtenir la llista de "
+"r鑠liques disponibles..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"S'ha produ飔 un problema en reiniciar la xarxa: \n"
+"\n"
+"%s"
#
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Teclat tadjik"
+msgid "Remove the loopback file?"
+msgstr "Voleu suprimir el fitxer de loopback?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Teclat tai"
+msgid "Selected size is larger than available space"
+msgstr "La mida seleccionada 閟 superior a la disponible"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armeni (m鄎uina d'escriure)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP server name missing!"
+msgstr "Falta el nom del Servidor NCP!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (TSCII)"
+msgid "Please choose your country."
+msgstr "Si us plau, seleccioneu el tipus del vostre ratol."
#
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbi (cir韑穕ic)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
+msgid "Hard Disk Backup files..."
+msgstr "C騪ies de seguretat del disc dur..."
+#
#: ../../keyboard.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Eslov"
+msgid "Laotian"
+msgstr "Laos"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Suec"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rus (Yawerty)"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
+"mesures de rendiment de qualsevol ordinador de la mateixa."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russian"
-msgstr "Rus"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
#
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Roman鑣 (qwerty)"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Seleccioneu un esc鄋er"
-#
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Roman鑣 (qwertz)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr ""
+"Av韘: la comprovaci d'aquesta targeta gr鄁ica pot penjar-vos l'ordinador"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"El nom d'usuari nom閟 pot contenir lletres en min鷖cula, n鷐eros, '-' i '_'"
-#: ../../keyboard.pm:1
+#
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugu鑣"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polon鑣 (disposici qwertz)"
+msgid "Welcome To Crackers"
+msgstr "Benvinguts, crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polon鑣 (disposici qwerty)"
+msgid "Module options:"
+msgstr "Opcions del m騞ul:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Norwegian"
-msgstr "Noruec"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holand鑣"
+msgid "Go on without configuring the network"
+msgstr "Continua sense configurar la xarxa"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malt鑣 (Estats Units)"
+msgid "Abort"
+msgstr "Abandona"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malt鑣 (Regne Unit)"
+msgid "No password prompt on %s at port %s"
+msgstr "No es demana cap contrasenya a %s en el port %s"
-#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongol (cir韑穕ic)"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Marqueu aquesta opci si voleu emprar el dispositiu no rebobinable."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmese)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Utilitza l'espai lliure"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedoni"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Malayalam"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"La partici de Windows est massa fragmentada. Si us plau, reinicieu "
+"l'ordinador sota Windows i executeu l'eina \"defrag\". Llavors, torneu a "
+"comen鏰r la instal穕aci del Mandrake Linux."
-#
#: ../../keyboard.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Let"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Noruec)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litu \"fon鑤ic\" QWERTY"
+msgid "Hard Disk Backup Progress..."
+msgstr "Progr閟 de la c騪ia de seguretat del disc dur..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litu \"fila de n鷐eros\" QWERTY"
+msgid "Unable to fork: %s"
+msgstr "No es pot bifurcar: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litu AZERTY (nou)"
+msgid "Type: "
+msgstr "Tipus: "
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litu AZERTY (antic)"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "<-- Suprimeix un client"
#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Laotian"
-msgstr "Laos"
+msgid "no fonts found"
+msgstr "no s'han trobat fonts"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Espanyol sud-americ"
+msgid "Mouse"
+msgstr "Ratol"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Teclat core"
+msgid "not enough room in /boot"
+msgstr "no hi ha prou espai a /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japon鑣 de 106 tecles"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Host name"
+msgstr "Nom de l'ordinador central"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Italian"
-msgstr "Itali"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Icelandic"
-msgstr "Island鑣"
+msgid "the color of the progress bar"
+msgstr "el color de la barra de progr閟"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Iranian"
-msgstr "Irani"
+msgid "Suppress Fonts Files"
+msgstr "Suprimeix els fitxers de fonts"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (fon鑤ic)"
+msgid "Add to RAID"
+msgstr "Afegeix al RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli"
-msgstr "Israeli"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
+"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
+"d'emerg鑞cia.\n"
+"\n"
+"Per a altres SO, l'entrada nom閟 consta d'una etiqueta i de la partici "
+"arrel.\n"
+"\n"
+"Per al Linux, hi ha unes quantes opcions possibles: \n"
+"\n"
+" * Etiqueta: 閟 nom閟 el nom a entrar en l'indicador del yaboot per\n"
+"seleccionar aquesta opci d'arrencada.\n"
+"\n"
+" * Imatge: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
+"variaci de vmlinux amb una extensi.\n"
+"\n"
+" * Arrel: el dispositiu arrel o '/' per a la instal穕aci del Linux.\n"
+"\n"
+" * Addici: en maquinari Apple, l'opci d'addici de nuclis s'utilitza\n"
+"for鏰 sovint per auxiliar en la inicialitzaci de maquinari de v韉eo o per\n"
+"habilitar l'emulaci del bot del ratol de teclat per als 2n i 3r botons,\n"
+"que sovint no existeixen en un ratol Apple convencional. Alguns exemples\n"
+"d'aix s髇:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: aquesta opci es pot utilitzar per carregar els m騞uls inicials,\n"
+"abans que el dispostiu d'arrencada estigui disponible, o per carregar\n"
+"una imatge de disc RAM en una situaci d'arrencada d'emerg鑞cia.\n"
+"\n"
+" * Mida de l'Initrd: la mida per defecte del disc RAM sol ser de 4096 "
+"bytes.\n"
+"Si necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opci.\n"
+"\n"
+" * Lectura-Escriptura: normalment, la partici arrel '/' es tracta "
+"inicialment com\n"
+"de nom閟 lectura per permetre una comprovaci del sistema de fitxers abans\n"
+"que el sistema esdevingui \"viu\". Podeu substituir aquesta opci aqu.\n"
+"\n"
+" * Sense V韉eo: en cas que el maquinari de v韉eo d'Apple resulti "
+"especialment\n"
+"problem鄑ic, podeu seleccionar aquesta opci per arrencar en mode 'no-"
+"v韉eo',\n"
+"amb el suport nadiu per a frame buffer.\n"
+"\n"
+" * Per defecte: seleccioneu aquesta entrada com a selecci per defecte del\n"
+"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
+"Aquesta opci tamb es ressaltar amb un '*' si premeu Tab per veure les\n"
+"seleccions d'arrencada."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croata"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"S'ha afegit correctament la impressora \"%s\" a Star Office/OpenOffice.org/"
+"GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hungarian"
-msgstr "Hongar鑣"
+msgid "No floppy drive available!"
+msgstr "No s'ha trobat cap unitat de disquet!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Per con鑙xer les opcions disponibles per a la impressora actual, llegiu la "
+"llista de sota o feu clic al bot \"Imprimeix la llista d'opcions\".%s%s\n"
+"\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Continue anyway?"
+msgstr "Voleu continuar igualment?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Si la vostra impressora no 閟 a la llista, escolliu-ne una de compatible "
+"(mireu el manual de la impressora) o una de similar."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Greek"
-msgstr "Grec"
+msgid "Printer"
+msgstr "Impressora"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgi (disposici \"llatina\")"
+msgid "Saudi Arabia"
+msgstr "Ar郻ia Saudita"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgi (disposici \"russa\")"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "French"
-msgstr "Franc鑣"
+msgid "Some devices were added:\n"
+msgstr "S'han afegit alguns dispositius:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Fin鑣"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometria: %s cilindres, %s cap鏰ls, %s sectors\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Espanyol"
+msgid "Printing on the printer \"%s\""
+msgstr "S'est imprimint en la impressora \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estoni"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Suec)"
+msgid "Restore From Tape"
+msgstr "Restaura des de cinta"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
+msgid "Choose the profile to configure"
+msgstr "Escolliu el perfil a configurar"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (Estats Units)"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../keyboard.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Danish"
-msgstr "Dan鑣"
+msgid "Backup Now from configuration file"
+msgstr "Fes la c騪ia de seguretat des del fitxer de configuraci"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"El nom de la impressora nom閟 pot constar de lletres, n鷐eros i el car郼ter "
+"de subratllat"
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
+msgid "Restarting printing system..."
+msgstr "S'est reiniciant el sistema d'impressi..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "German"
-msgstr "Alemany"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
+msgid "See hardware info"
+msgstr "Mira la informaci del maquinari"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
+msgid "First sector of boot partition"
+msgstr "Primer sector de la partici d'arrencada"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Su韘 (disposici francesa)"
+msgid "Printer manufacturer, model"
+msgstr "Fabricant de la impressora, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Su韘 (disposici alemanya)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Bielorr鷖"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosni"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Els temes de LILO i de Bootsplash s'han instal穕at amb 鑨it"
-#
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "B鷏gar (BDS)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Els dos par鄊etres m閟 importants son la velocitat de refresc vertical, que\n"
+"閟 la velocitat a qu es refresca tota la pantalla, i el m閟 important, la\n"
+"velocitat de sincronitzaci horitzontal, que 閟 la velocitat a qu es\n"
+"visualitzen les l韓ies d'exploraci.\n"
+"\n"
+"蓅 MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un rang\n"
+"de sincronitzaci superior a les possibilitats del vostre monitor, perqu鑌n"
+"el podr韊u fer malb.\n"
+"En cas de dubte, sigueu conservador amb aquest par鄊etre."
#
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "B鷏gar (fon鑤ic)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Bengali"
-msgstr "Bengal"
+msgid "Modify"
+msgstr "Modifica"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Les ordres \"%s\" i \"%s\" tamb permeten modificar els par鄊etres per a un "
+"treball d'impressi concret. Simplement afegiu els par鄊etres que vulgueu a "
+"la l韓ia d'ordres, p.ex. \"%s <fitxer>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan鑣 (llat)"
+msgid "Need hostname, username and password!"
+msgstr ""
+"Cal introduir el nom de l'ordinador central, el nom d'usuari i la "
+"contrasenya!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Arabic"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
+"WebDAV 閟 un protocol que permet muntar un directori d'un servidor web\n"
+"localment, i tractar-lo com si fos un sistema de fitxers local (amb el "
+"benent鑣\n"
+"que el servidor web est configurat com a servidor WebDAV). Si voleu afegir\n"
+"punts de muntatge WebDAV, seleccioneu \"Nou\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armeni (fon鑤ic)"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armeni (m鄎uina d'escriure)"
+msgid "new"
+msgstr "nou"
-#: ../../keyboard.pm:1
+#
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Voleu configurar la impressi?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armeni (antic)"
+msgid "Wizard"
+msgstr "Auxiliar"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "s'ha detectat %s"
#
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Albanian"
-msgstr "Alban鑣"
+msgid "Please choose where you want to backup"
+msgstr "Si us plau, escolliu on voleu fer la c騪ia de seguretat"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polon鑣"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Us caldr tornar a arrencar per tal que les modificacions de la taula de "
+"particions tinguin efecte"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Do not include the browser cache"
+msgstr "No incloguis la mem騬ia cau del navegador"
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Please, choose your keyboard layout."
+msgstr "Si us plau, seleccioneu la disposici del vostre teclat."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Z鄊bia"
+msgid "Standard"
+msgstr "Est鄋dard"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "South Africa"
-msgstr "Sud-鄁rica"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Serbia"
-msgstr "s鑢ie"
+msgid "Please choose your mouse type."
+msgstr "Si us plau, seleccioneu el tipus del vostre ratol."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Connect..."
+msgstr "Connecta..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Yemen"
-msgstr "Iemen"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "S'est configurant la impressora \"%s\"..."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "torna a configurar"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Illes Wallis i Futuna"
+msgid "About"
+msgstr "Abandona"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Proxies configuration"
+msgstr "Configuraci dels servidors intermediaris (proxies)"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vienam"
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Illes Verge Americanes"
+msgid "Start: sector %s\n"
+msgstr "Inici: sector %s\n"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Illes Verge Brit鄋iques"
+msgid "Network interface already configured"
+msgstr "La intef韈ie de xarxa ja est configurada"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Vene鐄ela"
+msgid "Couldn't access the floppy!"
+msgstr "No s'ha pogut accedir al disquet!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent i les Grenadines"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "s'est connectant amb l'auxiliar de Bugzilla..."
#
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Let"
-
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid "Mail Server"
+msgstr "Servidor de correu"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguai"
+msgid "Please click on a partition"
+msgstr "Si us plau, feu clic a una partici "
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Illes Perif鑢iques Menors dels EUA"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Have a nice day!"
+msgstr "Tingueu un bon dia!"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ukraine"
-msgstr "Ucra飊a"
+msgid "across Network"
+msgstr "a la xarxa"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Tanzania"
-msgstr ""
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Tail鄋dia"
+msgid "Upgrade %s"
+msgstr "Actualitza"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Select Printer Connection"
+msgstr "Seleccioneu la connexi de la impressora"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinitat i Tobago"
+msgid "Scanning for TV channels in progress ..."
+msgstr "La cerca de canals de TV est en progr閟..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkey"
-msgstr "Turquia"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"S'ha produ飔 un error en enviar el fitxer a trav閟 d'FTP.\n"
+" Si us plau, corregiu la configuraci de l'FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tun韘ia"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"El dimoni superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
+"altres serveis d'Internet a mesura que es van necessitant. 蓅 el "
+"responsable\n"
+"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
+"s'inhabilita l'inetd, s'inhabiliten tots els serveis de qu 閟 responsable."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "the height of the progress bar"
+msgstr "l'al玎ria de la barra de progr閟"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "East Timor"
-msgstr "Timor Oriental"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Desa-ho a trav閟 de %s en l'ordinador central: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tadjikistan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Tail鄋dia"
+msgid "Domain Name Server"
+msgstr "Servidor de Noms de Domini (DNS)"
-#: ../../lang.pm:1
+#
+#: ../../standalone/draksec:1
#, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "Security Level:"
+msgstr "Nivell de seguretat:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "Territoris francesos del Sud"
+msgid "Mount points must begin with a leading /"
+msgstr "Els punts de muntatge han de comen鏰r amb una /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Chad"
-msgstr "Txad"
+msgid "Postfix Mail Server"
+msgstr "Servidor de correu Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Illes Turks i Caicos"
+msgid "Quit without saving"
+msgstr "Surt sense desar"
#: ../../lang.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swazil鄋dia"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinam"
+msgid "Yemen"
+msgstr "Iemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Aquest producte es troba disponible al lloc web de MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome i Pr韓cipe"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Si us plau, especifiqueu la mida m鄕ima\n"
+" permesa per a Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Hi ha moltes coses per escollir de (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Som鄉ia"
+msgid "Hard drive detection"
+msgstr "Detecci del disc dur"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"No heu seleccionat cap grup de paquets.\n"
+"Escolliu la instal穕aci m韓ima que voleu:"
-#: ../../lang.pm:1
+#
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Please enter the WebDAV server URL"
+msgstr "Si us plau introdu飖 l'URL del servidor WebDAV"
#: ../../lang.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Tajikistan"
+msgstr "Tadjikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Slovakia"
-msgstr "Eslov鄎uia"
+msgid "Accept"
+msgstr "Accepta"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Illes Svalbard i Jan Mayen"
+msgid "Description"
+msgstr "Descripci"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Eslov鑞ia"
+msgid "Error opening %s for writing: %s"
+msgstr "S'ha produ飔 un error en obrir %s per escriure: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Mouse type: %s\n"
+msgstr "Tipus de ratol: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"La vostra targeta pot tenir acceleraci 3D de maquinari amb l'Xfree %s."
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Si us plau, escolliu l'espai disponible en el CD/DVD (en MB)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Illes Salom"
+msgid "Expert Area"
+msgstr "纑ea d'experts"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Ar郻ia Saudita"
+msgid "Choose a monitor"
+msgstr "Escolliu un monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Rus"
+msgid "Empty label not allowed"
+msgstr "No es permet una etiqueta buida"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Romania"
-msgstr "Romania"
+msgid "Maltese (UK)"
+msgstr "Malt鑣 (Regne Unit)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "I can't add any more partition"
+msgstr "No es pot afegir cap m閟 partici"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid "Size in MB: "
+msgstr "Mida en MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Remote printer"
+msgstr "Impressora remota"
-#: ../../lang.pm:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguai"
+msgid "Please choose a language to use."
+msgstr "Si us plau, trieu un idioma per utilitzar."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ATENCI: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
+"Nom閟 cal que accepteu per mantenir-lo configurat.\n"
+"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuraci."
-#: ../../lang.pm:1
+#
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Selecci del cam"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre i Miquelon"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Puc configurar el vostre ordinador de manera que entri autom鄑icament amb un "
+"nom d'usuari.\n"
+"Voleu activar aquesta caracter韘tica?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Poland"
-msgstr "Pol騨ia"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formata"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Philippines"
-msgstr "Filipines"
+msgid "Generic Printers"
+msgstr "Impressores gen鑢iques"
-#: ../../lang.pm:1
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Guinea"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
+"dispositiu/nom de fitxer en la l韓ia d'entrada"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "French Polynesia"
-msgstr "Polin鑣ia francesa"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Peru"
-msgstr "Per"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Primer sector de la partici d'arrencada"
-#: ../../lang.pm:1
+#
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Panama"
-msgstr "Panam"
+msgid "Alternative drivers"
+msgstr "Controladors alternatius"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Si us plau, marqueu totes les opcions que us calguin.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "New Zealand"
-msgstr "Nova Zelanda"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Cape Verde"
+msgstr "Cap Verd"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nig鑢ia"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
+"dispositiu/nom de fitxer en la l韓ia d'entrada"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Illa Norfolk"
+msgid "/Options/Test"
+msgstr "/Opcions/Prova"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Niger"
-msgstr "N韌er"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt m閟 "
+"f郼il\n"
+"d'utilitzar, per tamb molt sensible: no s'ha d'utilitzar en un ordinador\n"
+"connectat a d'altres o a Internet. No cal contrasenya per accedir-hi."
-#: ../../lang.pm:1
-#, c-format
-msgid "New Caledonia"
-msgstr "Nova Caled騨ia"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "S'est formatant la partici %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Nam韇ia"
+msgid "User name"
+msgstr "Nom d'usuari"
-#: ../../lang.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mo鏰mbic"
+msgid "New configuration (isdn-light)"
+msgstr "Nova configuraci (isdn-light)!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malaysia"
-msgstr "Mal鄆sia"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mexico"
-msgstr "M鑨ic"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Quina partici voleu utilitzar per al Linux4Win?"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Backup system"
+msgstr "C騪ia de seguretat del sistema"
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldives"
+msgid "Test pages"
+msgstr "P鄃ines de prova"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mauritius"
-msgstr "Maurici"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Llista de dades per restaurar:\n"
+"\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Malta"
-msgstr "Malta"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "S'est copiant %s"
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "TCP/Socket Printer Options"
+msgstr "Opcions de la impressora per a TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Mauritania"
-msgstr "Maurit鄋ia"
+msgid "Card mem (DMA)"
+msgstr "Targeta de mem騬ia (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinica"
+msgid "France"
+msgstr "Fran鏰"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Illes Marianes del Nord"
+msgid "browse"
+msgstr "navega"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mong騦ia"
+msgid "Checking installed software..."
+msgstr "S'est comprovant el programari instal穕at..."
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Remote printer name missing!"
+msgstr "Falta el nom de la impressora remota!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Voleu habilitar la impressi a les impressores de la xarxa local?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "Maced騨ia"
+msgid "Turkey"
+msgstr "Turquia"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Illes Marshall"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel Speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Number of buttons"
+msgstr "Nombre de botons"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Mold鄓ia"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamita \"fila num鑢ica\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Monaco"
-msgstr "M騨aco"
+msgid "Module"
+msgstr "M騞ul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Morocco"
-msgstr "Marroc"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"A m閟, les cues que no han estat creades amb aquest programa o amb "
+"\"foomatic-configure\" no es poden transferir."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Libya"
-msgstr "Lib鑢ia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Latvia"
-msgstr "Let騨ia"
+msgid "Hardware"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Tecles de Control i d'Alternativa simult鄋iament"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litu鄋ia"
+msgid "United States"
+msgstr "Estats Units"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Default OS?"
+msgstr "SO per defecte?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Lib鑢ia"
+msgid "Swiss (German layout)"
+msgstr "Su韘 (disposici alemanya)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "Configure all heads independently"
+msgstr "Configura tots els cap鏰ls independentment"
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Aqu teniu una llista de les impressores que s'han detectat. Escolliu la "
+"impressora que voleu configurar. La configuraci de la impressora es far "
+"autom鄑icament. Si la vostra impressora no ha estat correctament detectada o "
+"si preferiu personalitzar la seva configuraci, habiliteu \"Configuraci "
+"manual\"."
-#: ../../lang.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "NTP Server"
+msgstr "Servidor NTP"
-#: ../../lang.pm:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "L韇an"
+msgid "Load/Save on floppy"
+msgstr "Carrega/Desa al disquet"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Laos"
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
+"Aquest tema encara no t cap pantalla de presentaci de l'arrencada en %s!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Cayman Islands"
-msgstr "Illes Caiman"
-
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "nice"
+msgstr "bonic"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "M閟"
+msgid "Leaving in %d seconds"
+msgstr "%d segons"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Korea (North)"
+msgid "Please choose which serial port your modem is connected to."
msgstr ""
+"Si us plau, seleccioneu el port s鑢ie al qual teniu connectat el m騞em."
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Christopher i Nevis"
-
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Comores"
+msgid "Country"
+msgstr "Pa韘"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Property"
+msgstr "Propietat"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodja"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirguizistan"
+msgid "LAN Configuration"
+msgstr "Configuraci de la LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan"
-msgstr "Jap"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Jord鄋ia"
+msgid "Path or Module required"
+msgstr "El cam o el m騞ul s髇 necessaris"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid "Advanced Options"
+msgstr "Opcions avan鏰des"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Iceland"
-msgstr "Isl鄋dia"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Iraq"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Ara 閟 quan heu de decidir quina(es) partici(ns) voleu utilitzar per\n"
+"instal穕ar el sistema Mandrake Linux. Si ja s'han definit les particions\n"
+"(en una instal穕aci anterior de GNU/Linux o mitjan鏰nt una altra eina de\n"
+"particionament), podeu utilitzar les particions existents. En cas contrari,\n"
+"s'han de definir particions al disc dur.\n"
+"\n"
+"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
+"seleccionar\n"
+"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
+"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
+"\n"
+"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
+"\n"
+" * \"Buida-ho tot\": aquesta opci suprimeix totes les particions que hi "
+"ha\n"
+"al disc dur seleccionat.\n"
+"\n"
+" * \"Assignaci autom鄑ica\": aquesta opci us permet crear autom鄑icament "
+"les\n"
+"particions \"Ext2\" i Intercanvi en l'espai lliure del disc dur.\n"
+"\n"
+"\"M閟\": d髇a acc閟 a funcions addicionals:\n"
+"\n"
+" * \"Desa la taula de particions\": desa la taula de particions en un "
+"disquet.\n"
+"蓅 鷗il per a una posterior recuperaci de la taula de particions si fos "
+"necessari.\n"
+"Es recomana que efectueu aquesta operaci.\n"
+"\n"
+" * \"Restaura la taula de la particions\": permet restaurar una taula de "
+"particions\n"
+"que hagueu desat pr鑦iament en un disquet.\n"
+"\n"
+" * \"Recupera la taula de particions\": si la taula de particions est "
+"malmesa, podeu\n"
+"provar de recuperar-la utilitzant aquesta opci. Tingueu cura i recordeu que "
+"pot fallar.\n"
+"\n"
+" * \"Recarrega la taula de particions\": descarta tots els canvis fets i "
+"torna a \n"
+"carregar la taula de particions inicial.\n"
+"\n"
+" * \"Muntatge autom鄑ic de suports extra颾les\": si desseleccioneu "
+"aquesta opci fareu\n"
+"que els usuaris hagin de muntar i desmuntar les unitats de suports "
+"extra颾les com els \n"
+"disquets i els CD-ROM.\n"
+"\n"
+" * \"Auxiliar\": utilitzeu aquesta opci si voleu usar un auxiliar per "
+"particionar el \n"
+"vostre disc dur. Es recomana que l'utilitzeu si no teniu un bon coneixement "
+"sobre el\n"
+"particionament.\n"
+"\n"
+" * \"Desf閟\": utilitzeu aquesta opci per cancel穕ar els canvis.\n"
+"\n"
+" * \"Canvia entre mode normal/expert\": permet accions addicionals en les "
+"particions\n"
+"(tipus, opcions, format) i d髇a m閟 informaci.\n"
+"\n"
+" * \"Fet\": quan hagueu acabat de particionar el vostre disc dur, aquesta "
+"opci骪n"
+"desar els canvis al disc.\n"
+"\n"
+"Nota: podeu accedir a qualsevol opci mitjan鏰nt el teclat. Moveu-vos per "
+"les\n"
+"particions amb les tecles Tab i Fletxa amunt/Fletxa avall.\n"
+"\n"
+"Quan seleccioneu una partici, podeu utilitzar:\n"
+"\n"
+" * Ctrl+C per crear una nova partici (quan se n'ha seleccionat una de "
+"buida)\n"
+"\n"
+" * Ctrl+D per suprimir una partici骪n"
+"\n"
+" * Ctrl+M per definir el punt de muntatge\n"
+"\n"
+"Per a m閟 informaci sobre els diferents sistemes de fitxers disponibles, "
+"llegiu\n"
+"el cap韙ol sobre ext2FS del \"Manual de Refer鑞cia\".\n"
+"\n"
+"Si esteu fent la instal穕aci en un ordinador PPC, potser voldreu crear una\n"
+"petita partici \"bootstrap\" HFS d'un m韓im d'1 MB per a 鷖 del carregador\n"
+"d'arrencada yaboot. Si decidiu fer-la una mica m閟 gran, per exemple de\n"
+"50 MB, us ser d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
+"del disc RAM per a situacions d'emerg鑞cia durant l'arrencada."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Iraq"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Territori Brit鄋ic de l'Oce 蚽dic"
+msgid "There was an error installing packages:"
+msgstr "S'ha produ飔 un error en instal穕ar els paquets:"
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "India"
-msgstr "蚽dia"
+msgid "Lexmark inkjet configuration"
+msgstr "Configuraci de la Lexmark inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Undo"
+msgstr "Desf閟"
#
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Indon鑣ia"
+msgid "Save partition table"
+msgstr "Escriu la taula de particions"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hongria"
+msgid "Finnish"
+msgstr "Fin鑣"
#: ../../lang.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Hait"
+msgid "Macedonia"
+msgstr "Maced騨ia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Cro郼ia"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"La compartici per usuari utilitza el grup \"fileshare\".\n"
+"Podeu utilitzar userdrake per a afegir un usuari a aquest grup."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Hondures"
+msgid "Slovenian"
+msgstr "Eslov"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Illa Heard i Illes McDonald"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "China"
-msgstr "Xina"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea Bissau"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Libya"
+msgstr "Lib鑢ia"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Illes Ge騬gia del Sud i Sandwich del Sud"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"S'estan configurant les seqncies, instal穕ant el programari, iniciant els "
+"servidors..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guinea Equatorial"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Crema a un CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadalupe"
+msgid "Table"
+msgstr "Taula"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "I don't know how to format %s in type %s"
+msgstr "No s com formatar %s amb el tipus %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Gambia"
-msgstr "G鄊bia"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Groenl鄋dia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Stop Server"
+msgstr "Atura el servidor"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Seleccioneu un tema per a\n"
+"lilo i bootsplash, \n"
+"podeu triar-los\n"
+"per separat"
-#: ../../lang.pm:1
-#, c-format
-msgid "French Guiana"
-msgstr "Guaiana Francesa"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Ge騬gia"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Regne Unit"
+msgid "Use auto detection"
+msgstr "Utilitza la detecci autom鄑ica"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"El GPM afegeix suport de ratol a aplicacions Linux basades en text, com ara "
+"el Midnight Commander. Tamb permet operacions de tallar i enganxar amb el "
+"ratol, i inclou suport de men鷖 desplegables a la consola."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Illes F鑢oe"
+msgid "Started on boot"
+msgstr "Iniciat en l'arrencada"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Micronesia"
-msgstr "Micron鑣ia"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Uniu-vos als grups de suport de MandrakeSoft i a la Comunitat Linux en l韓ia "
+"per compartir els vostres coneixements i ajudar els altres esdevenint un "
+"expert reconegut al lloc web de suport t鑓nic en l韓ia:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Illes Malvines (Falkland)"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Les opcions seg黣nts es poden modificar per personalitzar la seguretat\n"
+"del vostre sistema. Feu clic a \"Ajuda\" si voleu m閟 informaci.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Finland"
-msgstr "Finl鄋dia"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Desa-ho a una cinta en el dispositiu: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Eti騪ia"
+msgid "East Timor"
+msgstr "Timor Oriental"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Spain"
-msgstr "Espanya"
+msgid "Del profile..."
+msgstr "Suprimeix el perfil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "S鄅ara Occidental"
+msgid "Installing Foomatic..."
+msgstr "S'est instal穕ant el Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Egypt"
-msgstr "Egipte"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-tecla de retroc閟"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Est騨ia"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "s'ha detectat %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Equador"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Cal instal穕ar el paquet %s. Voleu instal穕ar-lo?"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Algeria"
-msgstr "Alg鑢ia"
+msgid "Package: "
+msgstr "Paquet: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Rep鷅lica Dominicana"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "No s'ha pogut escriure /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominica"
+msgid "SECURITY WARNING!"
+msgstr "AV蚐 DE SEGURETAT!"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Denmark"
-msgstr "Dinamarca"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "No, I don't want autologin"
+msgstr "No, no vull l'entrada autom鄑ica"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Cyprus"
-msgstr "Xipre"
+msgid "Windows Migration tool"
+msgstr "Eina de migraci des de Windows"
-#: ../../lang.pm:1
-#, c-format
-msgid "Christmas Island"
-msgstr "Illa Christmas"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Escolliu el vostre idioma"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cap Verd"
+msgid "Removing %s"
+msgstr "S'est esborrant %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Testing your connection..."
+msgstr "S'est comprovant la vostra connexi..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Col騧bia"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "mida del fragment"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Camerun"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Ara, la contrasenya est habilitada, per l'鷖 com a ordinador de xarxa "
+"segueix sense ser recomanable."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Chile"
-msgstr "Xile"
+msgid "Start sector: "
+msgstr "Sector d'inici: "
#: ../../lang.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "Illes Cook"
+msgid "Congo (Brazzaville)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Costa d'Ivori"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Cal instal穕ar el paquet %s. Voleu instal穕ar-lo?"
#: ../../lang.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Su飐sa"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
+"Printerdrake ha comparat el nom del model resultant de la detecci "
+"autom鄑ica d'impressores amb els models llistats en la seva base de dades "
+"d'impressores per trobar el millor resultat. L'elecci pot ser dolenta, "
+"especialment si la vostra impressora no es troba a la base de dades. Per "
+"tant, mireu si l'elecci 閟 correcta i feu clic a \"El model 閟 correcte\" "
+"si ho 閟, o a \"Selecciona el model manualment\" per tal d'escollir "
+"manualment el model d'impressora en la pantalla seg黣nt.\n"
+"\n"
+"Per la vostra impressora el Printerdrake ha trobat:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Central African Republic"
-msgstr "Rep鷅lica Centrefricana"
+msgid "Bad password on %s"
+msgstr "Contrasenya incorrecta a %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
+"\n"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Illes Cocos (Keeling)"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Canada"
-msgstr "Canad"
+msgid "Zambia"
+msgstr "Z鄊bia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Security Administrator (login or email)"
+msgstr "Administrador de seguretat (login o email)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Belarus"
-msgstr "Bielorr鷖sia"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Nom閟 s'accepten nuclis de la s鑢ie 2.4."
-#: ../../lang.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Romanian (qwerty)"
+msgstr "Roman鑣 (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Illa Bouvet"
+msgid "Under Devel ... please wait."
+msgstr "Sota desenvolupament ... espereu si us plau."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Czech Republic"
+msgstr "Rep鷅lica Txeca"
#: ../../lang.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahames"
+msgid "Egypt"
+msgstr "Egipte"
-#: ../../lang.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasil"
+msgid "Old configuration (isdn4net)"
+msgstr "Configuraci antiga (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bol韛ia"
+msgid "Sound card"
+msgstr "Targeta de so"
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
+msgid "Import Fonts"
+msgstr "Importaci de fonts"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Teniu una partici FAT gran\n"
+"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
+"Suggereixo que primer en canvieu la mida\n"
+"(feu-hi clic i despr閟 feu clic a \"Canvia la mida\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Benin"
-msgstr "Ben韓"
+msgid "Suppress Temporary Files"
+msgstr "Suprimeix els fitxers temporals"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Change partition type"
+msgstr "Canvia el tipus de partici"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulg鄏ia"
+msgid "Network Options"
+msgstr "Opcions de xarxa"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Mostra el tema\n"
+"sota la consola"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangla Desh"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "(on %s)"
+msgstr "(en %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "B騭nia i Hercegovina"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaitjan"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Una llibreria que defensa contra els atacs de 'buffer overflow' i de 'format "
+"string'."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "average"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Australia"
-msgstr "Austr鄉ia"
+msgid "New printer name"
+msgstr "Nou nom d'impressora"
#: ../../lang.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa Americana"
+msgid "Equatorial Guinea"
+msgstr "Guinea Equatorial"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Antarctica"
-msgstr "Ant鄏tida"
+msgid "Build Backup"
+msgstr "Construeix la c騪ia de seguretat"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Per imprimir un fitxer des de la l韓ia d'ordres (finestra de terminal) "
+"utilitzeu l'ordre \"%s <fitxer>\" o \"%s <fitxer>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antilles Holandeses"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Arm鑞ia"
+msgid "Romanian (qwertz)"
+msgstr "Roman鑣 (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Albania"
-msgstr "Alb鄋ia"
+msgid "Write Config"
+msgstr "Escriu la configuraci"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"El dimoni 'routed' permet que la taula d'encaminadors IP autom鄑ics\n"
+"s'actualitzi mitjan鏰nt el protocol RIP. Mentre que el RIP s'utilitza\n"
+"鄊pliament en xarxes petites, les xarxes complexes necessiten protocols\n"
+"d'encaminament m閟 complexos."
#: ../../lang.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Uni dels Emirats 纑abs"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Browse"
+msgstr "Navega"
-#: ../../lang.pm:1
-#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "CDROM"
+msgstr "en CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Voleu intentar connectar-vos a Internet ara?"
-#: ../../loopback.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
+msgid "Belgian"
+msgstr "Belga"
-#: ../../lvm.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums l騡ics\n"
+msgid "Do you have an ISA sound card?"
+msgstr "Teniu una targeta de so ISA?"
-#: ../../modules.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
-"El suport per a PCMCIA ja no existeix en els nuclis 2.2. Utilitzeu un nucli "
-"2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA RODA!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Per activar el ratol,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Si us plau, comproveu el ratol."
+"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
+"No puc configurar aquest tipus de connexi."
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Cap ratol"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "Domini de Windows"
-#: ../../mouse.pm:1
+#
+#: ../../common.pm:1
#, c-format
-msgid "none"
-msgstr "cap"
+msgid "Can't make screenshots before partitioning"
+msgstr "No es poden fer captures de pantalla abans de fer les particions"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botons"
+msgid "Host Name"
+msgstr "Nom de l'ordinador central"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "2 buttons"
-msgstr "2 botons"
+msgid "/File/Save _As"
+msgstr "/Fitxer/_Anomena i desa"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 bot"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"%s no 閟 a la base de dades de l'esc鄋er, voleu configurar-lo manualment?"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Delay before booting default image"
+msgstr "Demora abans d'arrencar la imatge predeterminada"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (s鑢ie, tipus C7 antic)"
+msgid "Restrict command line options"
+msgstr "Limita les opcions de la l韓ia d'ordres"
-#: ../../mouse.pm:1
+#
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "East Europe"
+msgstr "Europa de l'Est"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Use free space"
+msgstr "Utilitza l'espai lliure"
-#: ../../mouse.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "use dhcp"
+msgstr "utilitza dhcp"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Mail alert"
+msgstr "Alerta de correu"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Internet configuration"
+msgstr "Configuraci d'Internet"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Detected %s"
+msgstr "S'ha detectat %s"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Detectada autom鄑icament"
-#: ../../mouse.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Ratol gen鑢ic de 3 botons"
+msgid "Finish"
+msgstr "Fi"
-#: ../../mouse.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Ratol gen鑢ic de 2 botons"
+msgid "Show automatically selected packages"
+msgstr "Mostra autom鄑icament els paquets seleccionats"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "serial"
-msgstr "s鑢ie"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wheel"
-msgstr "Rodeta"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Alguna cosa ha anat malament! Teniu instal穕at l'mkisofs?"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Generic"
-msgstr "Gen鑢ic"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Please try again"
+msgstr "Si us plau, torneu-ho a intentar"
-#: ../../mouse.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "The model is correct"
+msgstr "El model 閟 correcte"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratol PS2 gen鑢ic amb rodeta"
+msgid "FAT resizing failed: %s"
+msgstr "Ha fallat el redimensionament de la FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Individual package selection"
+msgstr "Selecci individual de paquets"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Standard"
-msgstr "Est鄋dard"
+msgid "This partition is not resizeable"
+msgstr "No es pot canviar la mida d'aquesta partici"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Ratol de Sun"
+msgid "Location"
+msgstr "Ubicaci"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
+msgid "USA (cable-hrc)"
+msgstr "EUA (cable-hrc)"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Informaci"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(en aquest ordinador)"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Aix 閟 correcte?"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Lletra d'unitat de DOS: %s (nom閟 閟 una suposici)\n"
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Seleccioneu els fitxers i directoris i feu clic a 'Afegeix'"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produ飔 un error en escriure al fitxer %s"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Bad backup file"
-msgstr "Fitxer de c騪ia de seguretat incorrecte"
+msgid "omit scsi modules"
+msgstr "omet els m騞uls SCSI"
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauraci des del fitxer %s: %s"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Hi ha un forat a la vostra taula de particions, per no puc utilitzar-lo.\n"
-"L'鷑ica soluci 閟 moure les particions prim鄏ies per fer que el forat quedi "
-"contigu a les particions ampliades"
+"At鑣 que esteu realitzant una instal穕aci des de xarxa, ja teniu la xarxa "
+"configurada.\n"
+"Feu clic a 'D'acord' per conservar la configuraci, o a 'Cancel穕a' per "
+"tornar a configurar la connexi a Internet i a la xarxa local.\n"
-#: ../../partition_table.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions ampliades"
+msgid "Keyboard layout: %s\n"
+msgstr "Disposici del teclat: %s\n"
-#: ../../partition_table.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "potser"
+msgid "Maltese (US)"
+msgstr "Malt鑣 (Estats Units)"
-#: ../../pkgs.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "nice"
-msgstr "bonic"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
+"de xarxa (NFS), SMB (gestor de xarxes d'鄏ea local/Windows) i NCP (NetWare)."
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "molt bonic"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "Targeta de TV"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "important"
-msgstr "important"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Canvia al mode normal"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "must have"
-msgstr "s'ha de tenir"
+msgid "Size"
+msgstr "Mida"
-#: ../../raid.pm:1
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "L'mkraid ha fallat"
+msgid "Greenland"
+msgstr "Groenl鄋dia"
-#: ../../raid.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "L'mkraid ha fallat (potser manquen les eines del RAID (raidtools)?)"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No es pot afegir una partici a un RAID _formatat_ md%d"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
+"L'etiqueta de la cinta no 閟 correcta. L'etiqueta d'aquesta cinta 閟 %s."
-#
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Stop"
-msgstr "Atura"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"La configuraci de la connexi compartida a Internet ja s'ha dut a terme.\n"
+"Ara est habilitada.\n"
+"\n"
+"Qu voleu fer?"
#
-#: ../../services.pm:1
-#, c-format
-msgid "Start"
-msgstr "Inicia"
-
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "On boot"
-msgstr "En arrencar"
+msgid "Delete All NBIs"
+msgstr "Suprimeix tots els NBI"
-#: ../../services.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-"Malauradament no hi ha m閟 informaci骪n"
-"sobre aquest servei."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Services and deamons"
-msgstr "Serveis i dimonis"
+"El LILO i el grub s髇 carregadors de l'arrencada de GNU/Linux. Normalment,\n"
+"aquesta etapa 閟 totalment autom鄑ica. De fet, el DrakX analitza el \n"
+"sector d'arrencada i actua d'acord amb el que hi troba:\n"
+"\n"
+" * si troba un sector d'arrencada de Windows, el reempla鏰r amb un sector\n"
+"d'arrencada de grub/LILO. Per tant, sereu capa de carregar el GNU/Linux\n"
+"o un altre sistema operatiu.\n"
+"\n"
+" * si es troba un sector d'arrencada del grub o del LILO, el reempla鏰r郳n"
+"amb un de nou.\n"
+"\n"
+"Si t algun dubte, el DrakX us presentar un di鄉eg amb diverses opcions:\n"
+"\n"
+" * \"Carregador de l'arrencada\": teniu tres opcions:\n"
+"\n"
+" * \"GRUB\": si preferiu el grub (men de text).\n"
+"\n"
+" * \"LILO amb men gr鄁ic\": si preferiu el LILO amb una interf韈ie\n"
+"gr鄁ica.\n"
+"\n"
+" * \"LILO amb men de text\": si preferiu el LILO amb el seu men de\n"
+"text.\n"
+"\n"
+" * \"Dispositiu d'arrencada\": en la majoria de casos, no heu de canviar "
+"l'opci骪n"
+"per defecte (\"/dev/hda\"), per si ho preferiu, el carregador de "
+"l'arrencada\n"
+"pot instal穕ar-se en el segon disc dur (\"/dev/hdb\"), o fins i tot en un \n"
+"disquet (\"/dev/fd0\").\n"
+"\n"
+" * \"Temps d'espera abans de carregar la imatge per defecte\": quan es "
+"reinicia\n"
+"l'ordinador, aquest 閟 el temps de qu disposa l'usuari per escollir una "
+"entrada\n"
+"diferent de l'entrada per defecte en el men d'arrencada.\n"
+"\n"
+"Teniu en compte que si escolliu no instal穕ar un carregador de l'arrencada \n"
+"(seleccionant \"Cancel穕a\" aqu), heu d'estar segurs que teniu alguna "
+"manera\n"
+"d'arrencar el vostre sistema Mandrake Linux! Encara m閟, estigueu segurs de\n"
+"saber qu feu abans de canviar alguna de les opcions.\n"
+"\n"
+"Si feu clic al bot \"Avan鏰t\" d'aquest di鄉eg podreu modificar algunes\n"
+"opcions avan鏰des, reservades als usuaris experts."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "stopped"
-msgstr "aturat"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "running"
-msgstr "s'est executant"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Quina configuraci de l'XFree voleu tenir?"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar autom鄑icament durant l'arrencada"
+msgid "More"
+msgstr "M閟"
#
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Servidor de base de dades"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Amb aquest nivell de seguretat, la utilitzaci d'aquest sistema com a "
+"servidor esdev possible.\n"
+"La seguretat 閟 ara prou alta com per utilitzar el sistema com a servidor\n"
+"que accepti connexions de molts clients. Nota: si la vostra m鄎uina 閟 nom閟 "
+"un client d'Internet, seria millor escollir un nivell m閟 baix."
-#
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remote Administration"
-msgstr "Administraci remota"
+msgid "Account Password"
+msgstr "Contrasenya del compte"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Compartici de fitxers"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Heu decidit instal穕ar el gestor de l'arrencada en una partici.\n"
+"Aix implica que ja teniu un gestor d'arrencada en el disc des del qual "
+"arrenqueu (p.ex.: System Commander).\n"
+"\n"
+"En quina unitat arrenqueu?"
-#: ../../services.pm:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Tajik keyboard"
+msgstr "Teclat tadjik"
-#
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "Impressi"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Podeu copiar la configuraci d'impressi que he fet per la cua %s a la %s, "
+"la cua d'impressi actual. Totes les dades de configuraci (nom "
+"d'impressora, descripci, ubicaci, tipus de connexi i par鄊etres per "
+"defecte) se sobreescriuran, per els treballs d'impressi no seran "
+"transferits.\n"
+"No totes les cues d'impressi poden ser transferides degut a les raons "
+"seg黣nts:\n"
#
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia l'X Font Server (aix 閟 necessari perqu l'XFree funcioni)."
+msgid "Font List"
+msgstr "Llista de fonts"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega els controladors per a dispositius USB."
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Potser us caldr canviar el dispositiu d'arrencada Open Firware per\n"
+"habilitar el carregador de l'arrencada. Si no veieu l'indicador del\n"
+"carregador de l'arrencada en tornar a arrencar, premeu\n"
+"Command-Option-O-F en tornar a arrencar i introdu飖:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Despr閟, escriviu: shut-down\n"
+"En l'arrencada seg黣nt heu de veure l'indicador del carregador de "
+"l'arrencada."
-#: ../../services.pm:1
-#, c-format
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"El syslog 閟 el sistema que utilitzen molts dimonis per registrar\n"
-"missatges en diversos fitxers de registre del sistema. 蓅 aconsellable\n"
-"executar-lo sempre."
+"Sembla que teniu un ordinador OldWorld o una m鄎uina \n"
+"desconeguda; el carregador d'arrencada yaboot no funcionar.\n"
+"La instal穕aci continuar, per haureu d'utilitzar el BootX\n"
+"per arrencar l'ordinador"
-#
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema de so en el vostre ordinador"
+msgid "Select file"
+msgstr "Seleccioneu el fitxer"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que estan connectats a un ordinador que est郳n"
-"executant el dimoni rwho (similar al finger)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui est connectat en altres ordinadors de la mateixa."
+"Podeu utilitzar aquestes ordres en el camp \"Ordre d'impressi骪" dels "
+"di鄉egs d'impressi de moltes aplicacions, per ara no heu de subministrar "
+"el fitxer perqu el fitxer per imprimir ja el proporciona l'aplicaci.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"mesures de rendiment de qualsevol ordinador de la mateixa."
+msgid "Japan"
+msgstr "Jap"
-#: ../../services.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+msgid "Print option list"
+msgstr "Imprimeix la llista d'opcions"
+
+#: ../../standalone/localedrake:1
+#, c-format
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-"El dimoni 'routed' permet que la taula d'encaminadors IP autom鄑ics\n"
-"s'actualitzi mitjan鏰nt el protocol RIP. Mentre que el RIP s'utilitza\n"
-"鄊pliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament m閟 complexos."
+"El canvi est fet, per perqu sigui efectiu heu de sortir de la sessi "
+"actual"
-#: ../../services.pm:1
+#
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Search servers"
+msgstr "Cerca servidors"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "Falta el nom de la cua NCP!"
+
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Assigna els dispositius en cru (raw) a dispositius de blocs (tals com les "
-"particions de\n"
-"disc dur), perqu siguin utilitzats per aplicacions com ara Oracle"
+"Av韘: s'ha detectat una altra connexi a Internet, podria estar utilitzant "
+"la vostra xarxa"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM etiquetat com \"%s\""
#: ../../services.pm:1
#, c-format
@@ -7038,372 +6465,348 @@ msgstr ""
"Desa i recupera el generador d'entropia del sistema per a\n"
"la generaci de nombres aleatoris d'una qualitat m閟 alta."
-#
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"El Postfix 閟 un Agent de Transport de Correu, que 閟 el programa que passa "
-"el correu d'un ordinador a un altre."
+"蓅 impossible de comprovar el sistema de fitxers %s. Voleu reparar els "
+"errors? (Vigileu, podr韊u perdre dades.)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El mapador de ports (portmapper) gestiona les connexions RPC, que s'usen "
-"per\n"
-"protocols com ara l'NFS i el NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
+msgid "Turn your computer into a reliable server"
+msgstr "Convertiu la vostra m鄎uina en un servidor fiable"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid " (driver %s)"
+msgstr " (controlador %s)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"El suport PCMCIA serveix normalment per funcionar amb coses com ara "
-"l'ethernet\n"
-"i els m騞ems en port鄑ils. No s'iniciar tret que es configuri, de manera\n"
-"que no hi ha problema per instal穕ar-lo en ordinadors que no el necessiten."
+"Fitxer(s) de loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Funciona amb OKI 4w i winprinters compatibles."
+msgid "I don't know"
+msgstr "No ho s"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Engega autom鄑icament a l'arrencada la tecla de fixaci del \n"
-"teclat num鑢ic a la consola i sota XFree."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", host TCP/IP \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"L'NFS 閟 un protocol popular de compartici de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge de fitxer NFS."
+"Ara es configurar un disquet d'instal穕aci autom鄑ica. Aquesta "
+"caracter韘tica 閟 perillosa i s'ha d'utilitzar amb molta cura.\n"
+"\n"
+"Amb aquesta caracter韘tica, sereu capa de repetir la instal穕aci que ja "
+"heu fet en aquest ordinador, tot i que se us consultar en alguns passos, "
+"perqu pugueu canviar els valors.\n"
+"\n"
+"Per m鄕ima seguretat, el particionament i la formataci mai seran executats "
+"autom鄑icament, independentment del que trieu durant la instal穕aci "
+"d'aquest ordinador.\n"
+"\n"
+"Voleu continuar?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"L'NFS 閟 un protocol popular de compartici de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjan鏰nt el fitxer /etc/exports."
+"\n"
+"\n"
+"La vostra targeta fa servir actualment el controlador %s \"%s\" (el "
+"controlador per defecte per a aquesta targeta 閟 \"%s\")"
-#: ../../services.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interf韈ies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
+msgid "Post Uninstall"
+msgstr "Post-desinstal穕aci"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid " ("
msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'鄏ea local/Windows) i NCP (NetWare)."
#
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Nivell de seguretat"
+
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) 閟 un servidor de noms de domini (DNS) que s'utilitza per "
-"convertir noms d'ordinadors centrals en adreces IP."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongol (cir韑穕ic)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El Servidor Virtual de Linux (LVS) s'usa per construir un servidor de \n"
-"gran capacitat i robustesa."
+msgid "Add a module"
+msgstr "Afegeix un m騞ul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd 閟 el dimoni d'impressi necessari perqu l'lpr funcioni\n"
-"correctament. B鄐icament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressi a la(es) impressora(es)."
+msgid "Profile to delete:"
+msgstr "Perfil a suprimir:"
-#: ../../services.pm:1
+#
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Fitxers locals"
+
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"De vegades, el Linuxconf determinar que s'han de fer algunes tasques\n"
-"en iniciar l'ordinador per mantenir la configuraci del sistema."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Detecci i configuraci autom鄑ica de maquinari en iniciar l'ordinador."
+msgid "Account Login (user name)"
+msgstr "Entrada del compte (nom d'usuari)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Fdiv bug"
msgstr ""
-"Regeneraci autom鄑ica del cap鏰l de nucli a /boot per\n"
-"/usr/include/linux/{autoconf,versi髛.h"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Es pot seleccionar mitjan鏰nt la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
+"Configuraci del drakfirewall\n"
+"\n"
+"Assegureu-vos d'haver configurat l'acc閟 a la xarxa local/Internet\n"
+"amb el drakconnect abans de continuar."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Executa el filtratge de paquets per als nuclis Linux 2.2, per instal穕ar\n"
-"un tallafoc que protegeixi el vostre ordinador d'atacs des de la xarxa."
+msgid "Benin"
+msgstr "Ben韓"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El dimoni superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. 蓅 el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd, s'inhabiliten tots els serveis de qu 閟 responsable."
+msgid "Uruguay"
+msgstr "Uruguai"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"L'Apache 閟 un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
+msgid "Path selection"
+msgstr "Selecci del cam"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid "Name/IP address of host:"
msgstr ""
-"El HardDrake fa una prova del maquinari, i opcionalment configura\n"
-"el maquinari nou/canviat."
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"El GPM afegeix suport de ratol a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. Tamb permet operacions de tallar i enganxar amb el "
-"ratol, i inclou suport de men鷖 desplegables a la consola."
+"Alguna cosa no va b en la vostra unitat. \n"
+"Ha fallat una comprovaci de la integritat de les dades. \n"
+"Aix vol dir que qualsevol cosa que s'escrigui al disc acabar feta malb."
-#: ../../services.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron 閟 un programa UNIX est鄋dard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"caracter韘tiques al cron b鄐ic, incloent seguretat millorada i opcions\n"
-"de configuraci m閟 potents."
+msgid "Printer host name or IP missing!"
+msgstr "Falta el nom o la IP de l'ordinador central de la impressora!"
-#: ../../services.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Please check all users that you want to include in your backup."
msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres autom鄑iques quan la\n"
-"mitjana de c鄏rega 閟 prou baixa."
+"Si us plau, escolliu tots els usuaris que voleu incloure en la c騪ia de "
+"seguretat."
-#: ../../services.pm:1
-#, c-format
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjan鏰nt el registre del sistema (syslog).\n"
-"Tamb es pot utilitzar per apagar l'ordinador quan queda poca bateria."
+"Aquest esc鄋er %s s'ha de configurar amb printerdrake.\n"
+"Podeu executar printerdrake des del Centre de Control Mandrake en la secci "
+"de Maquinari."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres peri騞iques."
+msgid "Bangladesh"
+msgstr "Bangla Desh"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Executa el sistema de so ALSA (Advanced Linux Sound Architecture)"
+msgid "Japan (cable)"
+msgstr "Jap (cable)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Benvingut a l'auxiliar de configuraci de la impressora\n"
+"\n"
+"Aquest auxiliar us ajudar a instal穕ar les impressores connectades "
+"directament a l'ordinador, o a la xarxa, o a una m鄎uina Windows remota.\n"
+"\n"
+"Si teniu impressores connectades a aquesta m鄎uina, endolleu-les i engegueu-"
+"les per tal de poder-les detectar autom鄑icament. Engegueu tamb les "
+"impressores de xarxa i les m鄎uines Windows que tenen impressores "
+"connectades.\n"
+"\n"
+"Noteu que la detecci autom鄑ica d'impressores de la xarxa local triga m閟 "
+"que la detecci d'impressores connectades directament a la m鄎uina. Seria "
+"millor que desactiv閟siu la detecci autom鄑ica d'impressores en xarxa o en "
+"m鄎uina Windows si no la necessiteu.\n"
+"\n"
+"Feu clic a \"Seg黣nt\" quan estigueu preparat, o a \"Cancel穕a\" si no voleu "
+"configurar ara les impressores."
#
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "Comprovacions inicials"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "S'estan instal穕ant els paquets..."
+msgid "Continue"
+msgstr "Continua"
-#: ../../standalone.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+msgid "Custom Restore"
+msgstr "Restauraci personalitzada"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "Script-based"
+msgstr "Basat en script"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Error reading file %s"
+msgstr "S'ha produ飔 un error en llegir el fitxer %s"
-#: ../../standalone.pm:1
+#
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
+msgid "PLL setting:"
+msgstr "Configuraci del PLL:"
-#: ../../standalone.pm:1
+#
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Heu de tenir una partici FAT muntada en /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid " on "
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Teclat"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr "L'URL ha de comen鏰r per http:// o https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+"Podeu especificar directament l'URI per accedir a la impressora. L'URI ha de "
+"complir les especificacions CUPS o Foomatic. Cal remarcar que alguns gestors "
+"de cues no accepten tots els tipus d'URI."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
+msgid "Other OS (SunOS...)"
+msgstr "Un altre SO (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Instal穕a/Actualitza"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+msgid "%d packages"
+msgstr "%d paquets"
#: ../../standalone.pm:1
#, c-format
@@ -7421,3761 +6824,4040 @@ msgid ""
"--version : show version number.\n"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Cal l'autenticaci de domini"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-" Aquest programa 閟 programari lliure; el podeu redistribuir i/o modificar\n"
-" sota els termes de la 'GNU General Public License' publicada per\n"
-" la Free Software Foundation; tant la versi 2 com (si voleu)\n"
-" qualsevol versi posterior.\n"
"\n"
-" Aquest programa 閟 distribueix amb l'esperan鏰 que ser 鷗il,\n"
-" per SENSE CAP GARANTIA; sense ni tant sols la garantia impl韈ita de\n"
-" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROP襍IT. Mireu la\n"
-" 'GNU General Public License' per a m閟 detalls.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
-" Haur韊u d'haver rebut una c騪ia de la 'GNU General Public License'\n"
-" amb el programa; si no 閟 aix, escriviu a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+msgstr ""
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Surt de la instal穕aci"
+msgid "Costa Rica"
+msgstr "Costa Rica"
#
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Instal穕a actualitzacions del sistema"
-
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Configura els serveis"
+msgid "Use libsafe for servers"
+msgstr "Empra libsafe per als servidors"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Configura l'X"
+msgid "Icelandic"
+msgstr "Island鑣"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Instal穕a el carregador de l'arrencada"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "Configura la xarxa"
+msgid "Please relog into %s to activate the changes"
+msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "Sense contrasenya"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Instal穕a el sistema"
+msgid "Lilo/grub mode"
+msgstr "Mode LILO/Grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Paquets a instal穕ar"
+msgid "Output"
+msgstr "Sortida"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Impressi"
+msgid "Circular mounts %s\n"
+msgstr "Muntatges circulars %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
+msgid "Martinique"
+msgstr "Martinica"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select installation class"
-msgstr "Tipus d'instal穕aci"
+msgid "HardDrive / NFS"
+msgstr "Disc Dur / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Detecci del disc dur"
+msgid "a number"
+msgstr "un n鷐ero"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Configura el ratol"
+msgid "Swedish"
+msgstr "Suec"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "License"
-msgstr ""
+msgid "Which %s driver should I try?"
+msgstr "Quin controlador de %s he de provar?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Rebreu un av韘 si algun dels serveis seleccionats deixa de funcionar"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Escolliu el vostre idioma"
+msgid "Filesystem types:"
+msgstr "Tipus de sistema de fitxers:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr ""
+msgid ", multi-function device on HP JetDirect"
+msgstr ", dispositiu multifunci en HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "D'acord"
+msgid "Northern Mariana Islands"
+msgstr "Illes Marianes del Nord"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "cap"
-#: ../../ugtk.pm:1
+#
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "usuari :"
-#: ../../Xconfig/card.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instal穕aci del controlador de pantalla)"
+msgid "Please enter your password"
+msgstr "Si us plau, introdu飖 la contrasenya"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"La vostra targeta pot tenir acceleraci 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
+"Nom del perfil a crear (el nou perfil es crea com una c騪ia de l'actual):"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s amb acceleraci 3D de maquinari EXPERIMENTAL"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Disquet d'arrencada"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La vostra targeta pot tenir acceleraci 3D de maquinari amb l'Xfree %s."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Marqueu aquesta opci si voleu esborrar el suport RW (1a sessi)"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleraci 3D de maquinari"
+msgid "Ghostscript referencing"
+msgstr "referenciat Ghostscript"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleraci 3D de maquinari, per nom閟 amb "
-"l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Carregador de l'arrencada a utilitzar"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleraci 3D de maquinari, per nom閟 amb "
-"l'Xfree %s.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
+msgid "Move"
+msgstr "Mou"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader to use"
+msgstr "Carregador de l'arrencada a utilitzar"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Configura nom閟 la targeta \"%s\"%s"
+msgid "SMB server host"
+msgstr "Ordinador central del servidor SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Servidor Samba"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensi Xinerama"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Warning\n"
+"\n"
+"Si us plau, llegiu atentament les cl鄒sules seg黣nts. Si no esteu\n"
+"d'acord amb qualsevol d'elles, no esteu autoritzat a instal穕ar\n"
+"els CD seg黣nts. Premeu 'Rebutja' per continuar la instal穕aci骪n"
+"sense utilitzar aquests CD.\n"
+"\n"
+"\n"
+"Alguns dels components que s'inclouen en aquest CD no estan\n"
+"regits per la llic鑞cia GPL o acords semblants. Cadascun d'aquests\n"
+"components es regeix per les cl鄒sules i condicions de la seva\n"
+"pr騪ia llic鑞cia espec韋ica. Si us plau, llegiu atentament i\n"
+"accepteu aquestes llic鑞cies espec韋iques abans d'utilitzar o\n"
+"redistribuir els components esmentats. En general, aquestes\n"
+"llic鑞cies impedeixen la transfer鑞cia, duplicaci (excepte amb\n"
+"la finalitat de fer-ne c騪ies de seguretat), redistribuci,\n"
+"enginyeria inversa, desassemblatge, decompilaci o modificaci del\n"
+"component. Qualsevol violaci de l'acord finalitzar immediatament\n"
+"els vostres drets sobre la llic鑞cia espec韋ica. Tret que la\n"
+"llic鑞cia espec韋ica us en garanteixi els drets, normalment no\n"
+"podreu instal穕ar els programes en m閟 d'un sistema, ni adaptar-lo\n"
+"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
+"contacte directament amb el distribu飀or o editor del component.\n"
+"La transfer鑞cia a terceres parts i la c騪ia d'aquests components,\n"
+"incloent la documentaci, estan en general prohibides.\n"
+"\n"
+"\n"
+"Tots els drets sobre els components del CD seg黣nt pertanyen als\n"
+"seus autors respectius i estan protegits per les lleis de\n"
+"propietat intel穕ectual i de copyright aplicables als programes\n"
+"inform鄑ics.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Configura tots els cap鏰ls independentment"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Suprimeix aquesta impressora de Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quina configuraci de l'XFree voleu tenir?"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"El Servidor Virtual de Linux (LVS) s'usa per construir un servidor de \n"
+"gran capacitat i robustesa."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Configuraci de l'XFree"
+msgid "4 billion colors (32 bits)"
+msgstr "4.294 milions de colors (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Seleccioneu la mida de la mem騬ia de la vostra targeta gr鄁ica"
+msgid "Micronesia"
+msgstr "Micron鑣ia"
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+#: ../../steps.pm:1
+#, c-format
+msgid "License"
msgstr ""
-"El vostre sistema permet l'鷖 d'una configuraci de m鷏tiples cap鏰ls.\n"
-"Qu voleu fer?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Configuraci Multi-head"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Escolliu un servidor X"
+msgid "This may take a moment to generate the keys."
+msgstr "La generaci de les claus pot trigar una estona."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "X server"
-msgstr "Servidor X"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Detecci autom鄑ica de la impressora (local, TCP/Socket i SMB)"
-#
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB o m閟"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
-#
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"S'ha produ飔 un error: no s'han trobat dispositius v鄉ids on crear nous "
+"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
+"problema"
#
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Starting the printing system at boot time"
+msgstr "S'est iniciant el sistema d'impressi en arrencar l'ordinador"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Voleu iniciar la connexi en arrencar?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Processor ID"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Sound trouble shooting"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polon鑣 (disposici qwerty)"
-#: ../../Xconfig/card.pm:1
+#
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "activate now"
+msgstr "Activa'l ara"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Voleu conservar els canvis?\n"
-"La configuraci actual 閟:\n"
"\n"
-"%s"
+"Activitats del Drakbackup a trav閟 del CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Opcions"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Ara s'instal穕ar el sistema d'impressi %s en un sistema que s'executa en "
+"el nivell de seguretat %s.\n"
+"\n"
+"Aquest sistema d'impressi executa un dimoni (proc閟 en segon pla) que "
+"espera els treballs d'impressi i els gestiona. Aquest dimoni 閟 accessible "
+"per ordinadors remots connectats a la xarxa i, per tant, 閟 un possible punt "
+"d'atac. Per tant, nom閟 s'arrenquen per defecte uns pocs dimonis triats en "
+"aquest nivell de seguretat.\n"
+"\n"
+"Realment voleu configurar la impressi en aquest ordinador?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Ordinador central \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Resoluci"
+msgid "This partition can't be used for loopback"
+msgstr "Aquesta partici no es pot utilitzar per al loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "El fitxer ja existeix. El voleu utilitzar?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Targeta gr鄁ica"
+msgid "received: "
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
+msgid "Right Alt key"
+msgstr "Tecla d'Alternativa Gr鄁ica"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
+msgid "the list of alternative drivers for this sound card"
+msgstr "la llista de controladors alternatius per a aquesta targeta de so"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos par鄊etres m閟 importants son la velocitat de refresc vertical, que\n"
-"閟 la velocitat a qu es refresca tota la pantalla, i el m閟 important, la\n"
-"velocitat de sincronitzaci horitzontal, que 閟 la velocitat a qu es\n"
-"visualitzen les l韓ies d'exploraci.\n"
-"\n"
-"蓅 MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un rang\n"
-"de sincronitzaci superior a les possibilitats del vostre monitor, perqu鑌n"
-"el podr韊u fer malb.\n"
-"En cas de dubte, sigueu conservador amb aquest par鄊etre."
+msgid "Gateway"
+msgstr "Passarel穕a"
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "L'exploraci Plug'n'Play ha fallat. Especifiqueu un monitor"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Compartici de fitxers"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Venedor"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n'Play"
+msgid "Tunisia"
+msgstr "Tun韘ia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
+msgid "Profile: "
+msgstr "Perfil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Targeta gr鄁ica: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resoluci i la profunditat de color"
+msgid "XawTV isn't installed!"
+msgstr "No teniu instal穕at XawTV!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Resolucions"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Crea/Transfereix\n"
+"la c騪ia de seguretat de les claus per a SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4.294 milions de colors (32 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "No incloguis fitxers cr韙ics (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
+msgid "old static device name used in dev package"
+msgstr "nom antic de dispositiu est鄑ic, usat en el paquet de desenvolupament"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
+msgid "This label is already used"
+msgstr "Aquesta etiqueta ja est en 鷖"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Benvingut a l'auxiliar de configuraci de la impressora\n"
+"\n"
+"Aquest auxiliar us ajudar a instal穕ar les impressores connectades a aquest "
+"ordinador o connectades directament a la xarxa local.\n"
+"\n"
+"Si teniu impressores connectades a aquesta m鄎uina, endolleu-les i engegueu-"
+"les per tal de poder-les detectar autom鄑icament. Engegueu tamb les "
+"impressores de la xarxa local.\n"
+"\n"
+"Noteu que la detecci autom鄑ica d'impressores de la xarxa local triga m閟 "
+"que la detecci d'impressores connectades directament a la m鄎uina. Seria "
+"millor que desactiv閟siu la detecci autom鄑ica d'impressores en xarxa si no "
+"la necessiteu.\n"
+"\n"
+"Feu clic a \"Seg黣nt\" quan estigueu preparat, o a \"Cancel穕a\" si no voleu "
+"configurar ara les impressores."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Aix 閟 correcte?"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Despr閟 de formatar la partici %s, se'n perdran totes les dades"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segons"
+msgid "Connection Time: "
+msgstr "Tipus de connexi: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
+msgid "select perm file to see/edit"
+msgstr "seleccioneu el fitxer perm que voleu veure/editar"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Av韘: la comprovaci d'aquesta targeta gr鄁ica pot penjar-vos l'ordinador"
+"Si us plau, inseriu el CD-ROM d'instal穕aci a la unitat i premeu "
+"'D'acord'.\n"
+"Si no el teniu, premeu 'Cancel穕a' per evitar l'actualitzaci en directe."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuraci?"
+msgid "Use group id for execution"
+msgstr "Usa l'identificador del grup (GID) per a l'execuci"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Comprova la configuraci"
+msgid "Choose the default user:"
+msgstr "Escolliu l'usuari per defecte:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Quina norma segueix el vostre televisor?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
-#, c-format
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Sembla que la vostra targeta gr鄁ica t un connector TV-OUT.\n"
-"Pot configurar-se de manera que faci servir mem騬ia d'imatge.\n"
-"\n"
-"A tal efecte, heu de connectar la targeta gr鄁ica al televisor abans "
-"d'arrencar l'ordinador.\n"
-"Llavors, escolliu l'opci \"TVout\" en el carregador de l'arrencada\n"
"\n"
-"Teniu aquesta caracter韘tica?"
+"Amb un servidor CUPS remot, aqu no us cal configurar cap\n"
+"impressora; les impressores es detectaran autom鄑icament."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Puc configurar el vostre ordinador de manera que executi autom鄑icament la "
-"interf韈ie gr鄁ica durant l'arrencada.\n"
-"Voleu que XFree s'inici quan torneu a arrencar l'ordinador?"
+"Mandrake Linux pot utilitzar m鷏tiples idiomes. Seleccioneu\n"
+"els llenguatges que volgueu instal穕ar. Estaran disponibles\n"
+"quan reinicieu el sistema, despr閟 que la instal穕aci s'hagi completat."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "Interf韈ie gr鄁ica a l'inici"
+msgid "Domain"
+msgstr "Domini"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de l'XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluci: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 del prove飀or (opcional)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
+msgid "Boot device"
+msgstr "Dispositiu d'arrencada"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Mem騬ia gr鄁ica: %s kB\n"
+msgid "Which partition do you want to resize?"
+msgstr "A quina partici voleu canviar-li la mida?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Targeta gr鄁ica: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Illes Perif鑢iques Menors dels EUA"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Eina per veure els registres"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronitzaci horitzontal del monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "detected on port %s"
+msgstr "detectat al port %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratol: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratol: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Targeta gr鄁ica: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposici del teclat: %s\n"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Marqueu aquesta opci si feu servir un dispositiu DVDRAM"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
+msgid "Splash selection"
+msgstr "Selecci de pantalla de presentaci"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Server: "
-msgstr "Servidor: "
+msgid "Extended partition not supported on this platform"
+msgstr "Aquesta plataforma no suporta particions ampliades"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "L'URL ha de comen鏰r per http:// o https://"
+msgid "ISDN Configuration"
+msgstr "Configuraci de l'XDSI"
#
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Si us plau introdu飖 l'URL del servidor WebDAV"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount"
-msgstr "Munta"
+msgid "high"
+msgstr "alt"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unmount"
-msgstr "Desmunta"
+msgid "Internet Connection Sharing"
+msgstr "Connexi a Internet compartida"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New"
-msgstr "Nou"
+msgid "Choose file"
+msgstr "Escolliu el fitxer"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-"WebDAV 閟 un protocol que permet muntar un directori d'un servidor web\n"
-"localment, i tractar-lo com si fos un sistema de fitxers local (amb el "
-"benent鑣\n"
-"que el servidor web est configurat com a servidor WebDAV). Si voleu afegir\n"
-"punts de muntatge WebDAV, seleccioneu \"Nou\"."
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu \"%s\" al seu lloc"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "Tipus"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer \"Unmount\""
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "Crea"
+"Atenci! S'ha detectat una configuraci existent del tallafoc. Potser us "
+"caldr fer algun ajustament manual despr閟 de la instal穕aci."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers:"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "S'est imprimint o llegint una targeta de fotos en \"%s\""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "Buit"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Voleu habilitar la impressi a les impressores anteriors o a les impressores "
+"de la xarxa local?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "Domini de Windows"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Printer default settings"
+msgstr "Selecci del model d'impressora"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Ratol PS2 gen鑢ic amb rodeta"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap"
-msgstr "Intercanvi"
+msgid "Removing old printer \"%s\"..."
+msgstr "S'est suprimint la impressora antiga \"%s\"..."
#
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Seleccioneu un esc鄋er"
#
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "No hard drives found"
-msgstr "No s'ha trobat cap disc dur!"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Elimina la selecci"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partici "
+msgid "French Southern Territories"
+msgstr "Territoris francesos del Sud"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partici FAT gran\n"
-"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i despr閟 feu clic a \"Canvia la mida\")"
+msgid "the vendor name of the processor"
+msgstr "el nom del venedor del dispositiu"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Trieu una acci"
+msgid "All data on this partition should be backed-up"
+msgstr "Cal fer una c騪ia de seguretat de totes les dades d'aquesta partici"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Auxiliar"
+msgid "Installing package %s"
+msgstr "S'est instal穕ant el paquet %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+msgid "Checking device and configuring HPOJ..."
msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2048\n"
-"sectors n'hi ha prou) al comen鏰ment del disc"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una c騪ia de seguretat de les vostres dades"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Clau de xifratge (un altre cop)"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Si voleu tenir m閟 particions, suprimiu-ne una per poder crear una partici "
+"ampliada"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Clau de xifratge"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"La impressora ha estat configurada autom鄑icament per permetre-us l'acc閟 "
+"als dispositius de targetes de fotos del vostre PC. Ara podeu accedir a les "
+"targetes de fotos emprant l'eina gr鄁ica \"MtoolsFM\" (men \"Aplicacions\" -"
+"> \"Eines d'arxivament\" -> \"Gestor de fitxers MTools\") o les utilitats de "
+"la l韓ia d'ordres \"mtools\" (introdu飖 \"man mtools\" a la l韓ia d'ordres "
+"per a m閟 informaci). Trobareu el sistema de fitxers de la targeta sota la "
+"lletra d'unitat \"p:\", o a les lletres seg黣nts si teniu m閟 d'una "
+"impressora HP amb unitats de targetes de fotos. Al \"MToolsFM\" podeu "
+"explorar les diferents lletres d'unitat amb el camp que es troba a la "
+"cantonada superior dreta de les llistes de fitxers."
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Les claus de xifratge no coincideixen"
+msgid "Choose packages to install"
+msgstr "Paquets a instal穕ar"
-# c-format
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Aquesta clau de xifratge 閟 massa senzilla (ha de tenir com a m韓im %d "
-"car郼ters)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Escolliu la clau de xifratge del sistema de fitxers"
+"\n"
+" Alguns errors durant el proc閟 de sendmail s髇 causats per \n"
+" una configuraci dolenta de postfix. Per resoldre-ho haur韊u de\n"
+" definir myhostname o mydomain en /etc/postfix/main.cf\n"
+"\n"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Clau de xifratge del sistema de fitxers: "
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tipus: "
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Al vostre sistema no li queda prou espai per a la instal穕aci o "
+"actualitzaci (%d > %d)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "al canal %d amb id %d\n"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Cada impressora necessita un nom (per exemple \"impressora\"). Els camps de "
+"Descripci i Ubicaci no s髇 necessaris. S髇 comentaris per als usuaris."
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Info: "
-msgstr "Informaci: "
+msgid "Network interface"
+msgstr "Interf韈ie de la xarxa"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s cap鏰ls, %s sectors\n"
+msgid "Reading printer data..."
+msgstr "S'estan llegint dades de la impressora..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
+msgid "Korean keyboard"
+msgstr "Teclat core"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Read-only"
-msgstr "Nom閟 lectura"
+msgid "Not connected"
+msgstr "Sense connexi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Device: "
-msgstr "Dispositiu: "
+msgid "Greek"
+msgstr "Grec"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"\n"
-"Aquesta partici especial\n"
-"Bootstrap 閟 per arrencar\n"
-"el vostre sistema en dual.\n"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Christopher i Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
+"La transfer鑞cia s'ha completat amb 鑨it\n"
+"Comproveu que podeu entrar al servidor amb:\n"
"\n"
-"蓅 possible que aquesta partici sigui\n"
-"una partici de Controladors;\n"
-"閟 millor que no la toqueu.\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"sense que se us demani una contrasenya."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
+msgid "Enable OF Boot?"
+msgstr "Voleu habilitar l'arrencada des d'OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mida del fragment %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Refresc vertical del monitor: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
+msgid "path"
+msgstr "cam"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partici arrencada per defecte\n"
-" (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
+msgid "Mount point"
+msgstr "Punt de muntatge"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"Fitxer(s) de loopback:\n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Restore system"
+msgstr "Restaura el sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mounted\n"
-msgstr "Muntat\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP end ip"
+msgstr "L'adre鏰 final del rang del DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatat\n"
+msgid "Another one"
+msgstr "Un altre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindre %d a %d\n"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
+msgid "Colombia"
+msgstr "Col騧bia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
+"Configuraci actual de '%s':\n"
+"\n"
+"Xarxa: %s\n"
+"Adre鏰 IP: %s\n"
+"Atribuci IP: %s\n"
+"Controlador: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
+msgid "Plug'n Play"
+msgstr "Plug'n'Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nom: "
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat de DOS: %s (nom閟 閟 una suposici)\n"
+msgid "Details"
+msgstr "Detalls"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partici %s ara 閟 %s"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Per raons de seguretat, ara es desconnectar."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Removing %s"
-msgstr "S'est esborrant %s"
+msgid "Synchronization tool"
+msgstr "Eina de sincronitzaci"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "S'est copiant %s"
+msgid "Checking your system..."
+msgstr "S'est comprovant el vostre sistema..."
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "S'estan movent els fitxers a la nova partici"
+msgid "Print"
+msgstr "Imprimeix"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"El directori %s encara cont dades\n"
-"(%s)"
+"Inseriu la cinta amb l'etiqueta de volum %s\n"
+" al dispositiu de cinta %s"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Fitxers ocults"
+msgid "Mongolia"
+msgstr "Mong騦ia"
-#
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Mou els fitxers a la nova partici"
+msgid "Mounted\n"
+msgstr "Muntat\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Despr閟 de formatar la partici %s, se'n perdran totes les dades"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Interf韈ie gr鄁ica a l'inici"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldr tornar a arrencar per tal que les modificacions tinguin efecte"
+msgid "Restore Users"
+msgstr "Restaura els usuaris"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriur al disc!"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Clau de xifratge"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Cal instal穕ar el paquet %s. Voleu instal穕ar-lo?"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"El mapador de ports (portmapper) gestiona les connexions RPC, que s'usen "
+"per\n"
+"protocols com ara l'NFS i el NIS. El servidor portmap s'ha d'estar\n"
+"executant en ordinadors que actuen com a servidors per a protocols que\n"
+"utilitzen el mecanisme RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament voleu?"
+msgid "Detected hardware"
+msgstr "S'ha detectat el seg黣nt maquinari"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operaci 閟 perillosa."
+msgid "Mauritius"
+msgstr "Maurici"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "chunk size"
-msgstr "mida del fragment"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmese)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "nivell"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Enabling swap partition %s"
+msgstr "S'est formatant la partici %s"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "dispositiu"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"No hi ha cap partici FAT a la qual canviar la mida o que es pugui utilitzar "
+"com a loopback (o no hi queda prou espai)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Various"
-msgstr "Diversos"
+msgid "Armenian (old)"
+msgstr "Armeni (antic)"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Opcions de muntatge"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Ja existeix una impressora amb nom \"%s\" en %s. \n"
+"Feu clic a \"Transfereix\" per sobreescriure-la.\n"
+"Tamb podeu escriure un nom nou o ometre aquesta impressora."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Un altre loopback ja est utilitzant el fitxer, escolliu-ne un de diferent"
+"Cerqueu les solucions als vostres problemes a trav閟 de la nostra plataforma "
+"de suport en l韓ia"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Proporcioneu un nom de fitxer"
+msgid ", host \"%s\", port %s"
+msgstr ", ordinador central \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
+msgid "Monaco"
+msgstr "M騨aco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Mida en MB: "
+msgid "%s formatting of %s failed"
+msgstr "%s formataci de %s ha fallat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
+msgid "Partitioning failed: %s"
+msgstr "Ha fallat el particionament: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Canada (cable)"
+msgstr "Canad (cable)"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../help.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Aquesta partici no es pot utilitzar per al loopback"
+msgid "Upgrade"
+msgstr "Actualitza"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "Nom LVM?"
+msgid "Workstation"
+msgstr "Estaci de treball"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "new"
-msgstr "nou"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"S'est instal穕ant el paquet %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir-ho"
+msgid "Kyrgyzstan"
+msgstr "Kirguizistan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir-ho"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Amb la documentaci b鄐ica (recomanat!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "S'est movent la partici..."
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, un programador d'ordres peri騞iques."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Moving"
-msgstr "S'est movent"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Heu de tenir una partici arrel.\n"
+"Per fer-ho, creeu una partici (o feu clic a una d'existent).\n"
+"Despr閟, trieu l'acci \"Punt de muntatge\" i doneu-li el valor '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "A quin sector ho voleu moure?"
+msgid "Proxy should be http://..."
+msgstr "El servidor intermediari ha de ser http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Sector"
-msgstr "Sector"
+msgid "South Africa"
+msgstr "Sud-鄁rica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "A quin disc ho voleu moure?"
+msgid "Western Sahara"
+msgstr "S鄅ara Occidental"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Move"
-msgstr "Mou"
+msgid "Etherboot Floppy/ISO"
+msgstr "Disquet/ISO per a Etherboot"
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nova mida en MB: "
+msgid "Modify printer configuration"
+msgstr "Modifica la configuraci de la impressora"
+#
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
+msgid "Choose a partition"
+msgstr "Trieu una partici"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Resize"
-msgstr "Canvia la mida"
+msgid "Edit current rule"
+msgstr "Edita la regla actual"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
+msgid "%s"
msgstr ""
-"Despr閟 de canviar la mida de la partici %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una c騪ia de seguretat de totes les dades d'aquesta partici"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partici"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els l韒its del sistema de fitxers de la FAT"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "On voleu muntar %s?"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-"No es pot anul穕ar el punt de muntatge, perqu aquesta partici骪n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "S'est canviant de ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "Canvia el tipus de partici"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Despr閟 de canviar el tipus de la partici %s, se'n perdran totes les dades"
+msgid "Please test the mouse"
+msgstr "Si us plau, comproveu el ratol."
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Voleu suprimir el fitxer de loopback?"
+msgid "Other Media"
+msgstr "Altres suports"
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"No podeu crear una nova partici骪n"
-"(perqu heu arribat al m鄕im nombre de particions prim鄏ies).\n"
-"Esborreu primer una partici prim鄏ia i creeu una partici ampliada."
+msgid "Backup system files"
+msgstr "C騪ia de seguretat dels fitxers de sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Prefer鑞cia: "
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector d'inici: "
+msgid "Sector"
+msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Crea una nova partici"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"No podeu seleccionar aquest paquet perqu no queda prou espai per instal穕ar-"
+"lo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "Elimina de l'LVM"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Genera un disquet per a la instal穕aci autom鄑ica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
+msgid "Dialing mode"
+msgstr "Mode de marcatge"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Afegeix a l'LVM"
+msgid "File sharing"
+msgstr "Compartici de fitxers"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
+msgid "Clean /tmp at each boot"
+msgstr "Buida /tmp en cada arrencada"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Format"
-msgstr "Formata"
+msgid "Malawi"
+msgstr "Malawi"
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Informaci detallada"
+msgid "Please choose your type of mouse."
+msgstr "Si us plau, seleccioneu el tipus del vostre ratol."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "S'est intentant recuperar la taula de particions"
+msgid "class of hardware device"
+msgstr "tipus de dispositiu de maquinari"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Inseriu un disquet a la unitat\n"
-"Se'n perdran totes les dades"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Warning"
-msgstr "Advert鑞cia"
+msgid "United Kingdom"
+msgstr "Regne Unit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
+msgid "running"
+msgstr "s'est executant"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La c騪ia de seguretat de la taula de particions no t la mateixa mida\n"
-"Voleu continuar igualment?"
+msgid "default"
+msgstr "predeterminat"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Muntatge autom鄑ic dels dispositius extra颾les"
+msgid "Indonesia"
+msgstr "Indon鑣ia"
#
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Reload partition table"
-msgstr "Torna a carregar la taula de particions"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Recupera la taula de particions"
+msgid "France [SECAM]"
+msgstr "Fran鏰 [SECAM]"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Restaura la taula de particions"
+msgid "restrict"
+msgstr "limita"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
+msgid "must have"
+msgstr "s'ha de tenir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Si voleu tenir m閟 particions, suprimiu-ne una per poder crear una partici "
-"ampliada"
+"CUPS no permet l'鷖 d'impressores en servidors Novell ni que les impressores "
+"envi飊 les dades dins d'una ordre formada arbitr鄏iament.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "No es pot afegir cap m閟 partici"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions prim鄏ies"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Nom de domini"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informaci del disc dur"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"Trobareu tot el conjunt de solucions Linux, aix com ofertes especials en "
+"productes i altres avantatges, a la nostra botiga en l韓ia:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Assigna autom鄑icament"
+msgid "access to administrative files"
+msgstr "acc閟 a fitxers administratius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clear all"
-msgstr "Buida-ho tot"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"S'ha produ飔 un error en enviar el correu.\n"
+" El vostre informe no ha estat enviat.\n"
+" Si us plau configureu el sendmail"
-#
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu desar les modificacions a /etc/fstab"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", dispositiu multifunci en port paral穕el \\/*%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense escriure la taula de particions?"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "Surt sense desar"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Canvia al mode expert"
+msgid "Swap"
+msgstr "Intercanvi"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Canvia al mode normal"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Connecta't a Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Undo"
-msgstr "Desf閟"
+msgid "Restore Other"
+msgstr "Restaura altres"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Exit"
-msgstr "Surt"
+msgid "TV card"
+msgstr "Targeta de TV"
#
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Trieu una partici"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Impressora en servidor SMB/Windows 95/98/NT"
-#
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose another partition"
-msgstr "Trieu una altra partici"
+msgid ", "
+msgstr ""
-#
-#: ../../diskdrake/removable.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Change type"
-msgstr "Canvia el tipus"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
+msgstr ""
#
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Search servers"
-msgstr "Cerca servidors"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Elimina la selecci"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "Domain"
-msgstr "Domini"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"El Postfix 閟 un Agent de Transport de Correu, que 閟 el programa que passa "
+"el correu d'un ordinador a un altre."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Username"
-msgstr "Nom d'usuari"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-"Introdu飖 el vostre nom d'usuari, la contrasenya i el nom de domini per "
-"accedir a aquesta m鄎uina."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Cal l'autenticaci de domini"
+"Aqu podeu triar la tecla o la combinaci de tecles que \n"
+"permetran canviar entre diferents disposicions de teclat\n"
+"(p.ex.: llatina i no llatina)"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Another one"
-msgstr "Un altre"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Configuraci de xarxa"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which username"
-msgstr "Quin nom d'usuari?"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr ""
-"No es pot entrar amb el nom d'usuari %s (potser la contrasenya 閟 "
-"incorrecta?)"
+msgid "Restore From CD"
+msgstr "Restaura des de CD"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "cpu # "
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"Ara es configurar l'ordinador per tal que comparteixi la connexi a "
+"Internet.\n"
+"Amb aquesta caracter韘tica, altres ordinadors de la vostra xarxa local\n"
+"podran utilitzar la connexi a Internet d'aquest ordinador.\n"
+"\n"
+"Assegureu-vos d'haver configurat l'acc閟 a Internet i a la xarxa local amb "
+"el drakconnect abans de continuar.\n"
+"Nota: per configurar una xarxa d'鄏ea local (LAN), us cal un adaptador de "
+"xarxa dedicat."
-#: ../../harddrake/data.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "SMBus controllers"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
+"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
+"connectar-vos a Internet."
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USB controllers"
+msgid "Photo memory card access on your HP multi-function device"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SCSI controllers"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
msgstr ""
+"MandrakeSoft treballa al costat d'un conjunt d'empreses que ofereixen "
+"solucions professionals compatibles amb el Mandrake Linux. Trobareu una "
+"llista d'aquests socis al MandrakeStore"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Firewire controllers"
-msgstr ""
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ara, la compartici de la connexi a Internet est inhabilitada."
-#: ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Latin American"
+msgstr "Espanyol sud-americ"
#
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Seleccioneu un esc鄋er"
-
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Desconegut|Gen鑢ic"
+msgid "Japanese text printing mode"
+msgstr "Modifica el sistema d'impressi"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Old device file"
+msgstr "Fitxer de dispositiu antic"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Model"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Info: "
+msgstr "Informaci: "
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Targeta Ethernet"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Button `%s': %s"
+msgstr "Bot '%s': %s"
-#: ../../harddrake/data.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "Please wait"
+msgstr "Espereu si us plau"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Targeta de so"
+msgid "None"
+msgstr "Fet"
#
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Altres suports"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "Targeta de TV"
-
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Mode de v韉eo"
-
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Tape"
-msgstr "Cinta"
+msgid "The entered IP is not correct.\n"
+msgstr "El model 閟 correcte"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Ethernet Card"
+msgstr "Targeta Ethernet"
-#: ../../harddrake/data.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "CDROM"
-msgstr "en CDROM"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Dan鑣"
+msgid "Info"
+msgstr "Informaci"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Zip"
-msgstr ""
+msgid "Install"
+msgstr "Instal穕a"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Disquet d'arrencada"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Let me pick any driver"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
+"Feu clic a \"D'acord\" si voleu suprimir totes les dades i particions\n"
+"que hi ha en aquesta unitat de disc. Aneu amb compte perqu, un cop\n"
+"hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partici骪n"
+"del disc, incloent les dades de Windows.\n"
+"\n"
+"Feu clic a \"Cancel穕a\" per anul穕ar aquesta operaci sense perdre cap "
+"dada\n"
+"ni partici d'aquest disc."
-#: ../../harddrake/sound.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Driver:"
-msgstr "Controlador:"
+msgid "Exit install"
+msgstr "Surt de la instal穕aci"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
+"Ja est tot configurat.\n"
+"Ara podeu compartir la connexi a Internet amb altres ordinadors de la "
+"vostra xarxa d'鄏ea local utilitzant la configuraci autom鄑ica de xarxa "
+"(DHCP)."
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Servidor CUPS remot"
-#: ../../harddrake/sound.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Sun - Mouse"
+msgstr "Ratol de Sun"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"There is only one configured network adapter on your system:\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"%s\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Nom閟 teniu un adaptador de xarxa configurat al sistema:\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"%s\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+"Ara es configurar la vostra xarxa d'鄏ea local amb aquest adaptador."
-#: ../../harddrake/sound.pm:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
+msgid "Minimal install"
+msgstr "Instal穕aci m韓ima"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
+#: ../../lang.pm:1
+#, c-format
+msgid "Ethiopia"
+msgstr "Eti騪ia"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr "Controlador desconegut"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- dispositius PCI: d髇a la ranura PCI, el dispositiu i la funci d'aquesta "
+"targeta\n"
+"- dispositius EIDE: diu si el dispositiu 閟ta configurat com a mestre o com "
+"a esclau\n"
+"- dispositius SCSI: d髇a el bus SCSI i els identificadors SCSI del dispositiu"
-#
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "No known driver"
-msgstr "No hi ha cap controlador conegut"
+msgid "Total size: %d / %d MB"
+msgstr "Mida total: %d / %d MB"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
-"de so (%s), que actualment fa servir \"%s\""
+msgid "disabled"
+msgstr "inhabilita"
-#
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "No open source driver"
-msgstr "No hi ha cap controlador conegut"
+msgid "Search for new scanners"
+msgstr "Impressores disponibles"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Espereu si us plau... s'est aplicant la configuraci"
+msgid "Disabling servers..."
+msgstr "S'estan inhabilitant els servidors..."
-#: ../../harddrake/sound.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Please choose the time \n"
+"interval between each backup"
msgstr ""
-"L'antic controlador \"%s\" ha estat desaprovat.\n"
-"\n"
-"S'ha vist que causa problemes al nucli en descarregar-se.\n"
-"\n"
-"El nou controlador \"%s\" nom閟 s'usar en la seg黣nt arrencada."
+"Si us plau, escolliu l'interval \n"
+"de temps entre cada c騪ia de seguretat"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Ha fallat la instal穕aci de %s. S'ha produ飔 l'error seg黣nt:"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakboot:1
#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "No s'ha pogut executar mkinitrd -f /boot/initrd-%s.img %s."
+
+#: ../../install_any.pm:1
+#, fuzzy, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
+"You have selected the following server(s): %s\n"
"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"L'OSS (Sistema de So Obert) va ser la primera API de so. 蓅 una API "
-"independent del sistema operatiu (disponible en molts sistemes UNIX) per 閟 "
-"molt b鄐ica i limitada.\n"
-"Encara m閟, tots els controladors OSS reinventen la roda...\n"
"\n"
-"L'ALSA (Arquitectura Avan鏰da de So per a Linux) 閟 una arquitectura modular "
-"que\n"
-"funciona amb una 鄊plia varietat de targetes ISA, USB i PCI.\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
"\n"
-"Tamb proporciona una API molt m閟 funcional que la d'OSS.\n"
"\n"
-"Per utilitzar ALSA, es pot triar entre:\n"
-"- l'antiga API compatible d'OSS\n"
-"- la nova API d'ALSA que proporciona moltes caracter韘tiques millorades per "
-"que necessita fer servir la lliberia ALSA.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
+"Do you really want to install these servers?\n"
+msgstr ""
+"Heu seleccionat el(s) seg黣nt(s) servidor(s): %s\n"
"\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
+"Aquests servidors estan activats per defecte. No tenen cap problema de "
+"seguretat\n"
+"conegut, per se'n podrien trobar de nous. Si fos aix, haureu d'actualitzar-"
+"los\n"
+"el m閟 aviat possible.\n"
"\n"
"\n"
-"La vostra targeta fa servir actualment el controlador %s \"%s\" (el "
-"controlador per defecte per a aquesta targeta 閟 \"%s\")"
+"Voleu realment instal穕ar aquests servidors?\n"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Aqu podeu seleccionar un controlador alternatiu (tant OSS com ALSA) per ala "
-"targeta de so (%s)"
+msgid "Network printer (TCP/Socket)"
+msgstr "Impressora de xarxa (TCP/Socket)"
#
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound configuration"
-msgstr "Configuraci de so"
+msgid "Backup User files..."
+msgstr "Fes una c騪ia de seguretat dels fitxers d'usuari..."
-#: ../../harddrake/sound.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Instal穕a el sistema"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Primer servidor DNS (opcional)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
-"de so (%s), que actualment fa servir \"%s\""
+"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
+"dispositiu/nom de fitxer en la l韓ia d'entrada"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No alternative driver"
-msgstr "No hi ha cap controlador alternatiu"
+msgid "dhcpd Config..."
+msgstr "Configuraci del dhcpd..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "enable radio support"
-msgstr "habilita l'鷖 de la r郿io"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "La configuraci ja s'ha realitzat, per ara est inhabilitada."
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "Permet l'鷖 de la r郿io:"
+msgid "LILO/grub Installation"
+msgstr "Instal穕aci del LILO/grub"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr "Israeli"
#
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "PLL setting:"
-msgstr "Configuraci del PLL:"
+msgid "load setting"
+msgstr "par鄊etre de c鄏rega"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nombre de mem騬ies interm鑔ies per a captures amb MMAP"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Impressora \"%s\" en el servidor \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nombre de mem騬ies interm鑔ies de captura:"
+msgid "Floppy can be removed now"
+msgstr "Ja podeu extreure el disquet"
#
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Instal穕aci m韓ima"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tipus de sintonitzador:"
+msgid "Denmark"
+msgstr "Dinamarca"
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Model de la targeta:"
+msgid "Moving partition..."
+msgstr "S'est movent la partici..."
-#: ../../harddrake/v4l.pm:1
+#
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP d'aquest servidor DHCP"
+
+#: ../../Xconfig/test.pm:1
#, c-format
+msgid "Test of the configuration"
+msgstr "Comprova la configuraci"
+
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "S'estan instal穕ant els paquets..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Per a les targetes de TV m閟 modernes, el m騞ul bttv del nucli GNU/Linux "
-"detecta autom鄑icament els par鄊etres correctes.\n"
-"Si la vostra targeta no 閟 detectada, podeu for鏰r el tipus de sintonitzador "
-"i de targeta aqu. Simplement seleccioneu els par鄊etres necessaris per a la "
-"vostra targeta de TV"
+"Finalment, depenent de si heu seleccionat poder triar els paquets "
+"individuals\n"
+"o no, se us presentar un arbre amb tots els paquets classificats per grups "
+"i\n"
+"subgrups. Mentre navegueu per l'arbre, podeu seleccionar grups complets,\n"
+"subgrups o paquets individuals.\n"
+"\n"
+"Cada cop que seleccioneu un paquet de l'arbre, apareix una descripci a la\n"
+"dreta. Quan hagueu acabat la selecci de paquets, cliqueu a \"Instal穕a\",\n"
+"que iniciar el proc閟 d'instal穕aci. Depenent de la velocitat del vostre \n"
+"maquinari i del n鷐ero de paquets que necessitin ser instal穕ats, el proc閟\n"
+"pot trigar una bona estona en acabar. A la pantalla es mostrar una "
+"estimaci骪n"
+"del temps que durar la instal穕aci de tots els paquets, per tal ajudar-"
+"vos\n"
+"a decidir si teniu prou temps per gaudir d'una tassa de caf.\n"
+"\n"
+"Si heu seleccionat un paquet de servidor, intencionadament o perqu formava\n"
+"part d'un grup, se us demanar que confirmeu si realment voleu instal穕ar\n"
+"aquests servidors. Sota Mandrake Linux, qualsevol servidor instal穕at "
+"s'inicia\n"
+"per defecte quan el sistema arrenca. Tot i que fossin segurs i no "
+"tinguessin\n"
+"cap problema quan es va fer la distribuci, podria ser que es descobrissin\n"
+"forats de seguretat despr閟 que aquesta versi de Mandrake Linux es "
+"complet閟.\n"
+"Si no sabeu qu se suposa que fa un servei en particular o per qu s'est郳n"
+"instal穕ant, aleshores feu clic a \"No\". Si pitgeu \"S韁" s'instal穕aran\n"
+"els serveis llistats i s'iniciaran autom鄑icament per defecte.\n"
+"\n"
+"L'opci de \"Depend鑞cies autom鄑iques\" nom閟 deshabilita el di鄉eg "
+"d'advert鑞cia\n"
+"que apareix quan l'instal穕ador selecciona autom鄑icament un paquet. Aix騖n"
+"passa perqu s'ha determinat que es necessita safisfer una depend鑞cia d'un\n"
+"altre paquet per tal que la instal穕aci es completi amb 鑨it.\n"
+"\n"
+"La icona petita d'un disquet al final de la llista permet carregar una "
+"llista\n"
+"de paquets escollits en una instal穕aci anterior. Fent clic en aquesta "
+"icona\n"
+"el sistema us demanar que inseriu un disquet creat pr鑦iament al final "
+"d'una\n"
+"altra instal穕aci. Mireu el segon suggeriment de l'鷏tim pas per saber com "
+"crear\n"
+"aquest tipus de disquet."
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Desconegut|Gen鑢ic"
+msgid "Choose your filesystem encryption key"
+msgstr "Escolliu la clau de xifratge del sistema de fitxers"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Desconegut|CPH06X (bt878) [molts venedors]"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Seleccioneu el vostre dispositiu de CD/DVD\n"
+"(Premeu Retorn perqu aquestes opcions es propaguin a d'altres camps.\n"
+"Aquest camp no 閟 necessari, nom閟 閟 una eina per omplir el formulari.)"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Desconegut|CPH05X (bt878) [molts venedors]"
+msgid "Andorra"
+msgstr "Andorra"
-#
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Detecci autom鄑ica"
-
-#: ../../interactive/newt.pm:1
-#, fuzzy, c-format
-msgid "Do"
-msgstr "Baixa"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Quina 閟 la vostra elecci? (predeterminat %s)"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Elecci incorrecta, torneu-ho a intentar\n"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (per defecte: %s)"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Torna a enviar"
+msgid "Alternative test page (Letter)"
+msgstr "P鄃ina de prova alternativa (Carta)"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"=> Av韘, una etiqueta ha canviat:\n"
-"%s"
+"Configuraci del servidor DHCP.\n"
+"\n"
+"Aqu podreu seleccionar diverses opcions per a la configuraci del servidor "
+"DHCP.\n"
+"Si no sabeu el significat d'una opci, deixeu-la com est.\n"
-#: ../../interactive/stdio.pm:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Escolliu un servidor X"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Mida de la partici d'intercanvi en MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"Si us plau, escolliu el primer n鷐ero del rang 10 que voleu editar,\n"
-"o premeu Retorn per continuar.\n"
-"Qu trieu? "
+"Ja hi ha les claus d'un altre programa\n"
+"(diferent del Drakbackup)"
-#: ../../interactive/stdio.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hi ha moltes coses per escollir de (%s).\n"
+msgid "No changes to backup!"
+msgstr "No s'ha fet cap canvi a la c騪ia de seguretat"
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Quina 閟 la vostra elecci? (predeterminat '%s'%s)"
+msgid "Formatted\n"
+msgstr "Formatat\n"
-#: ../../interactive/stdio.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " entreu 'void' per entrada buida"
+msgid "Type of install"
+msgstr "Tipus d'instal穕aci"
#
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Voleu fer clic en aquest bot?"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Impressora \"%s\" en servidor SMB/Windows \"%s\""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Bot '%s': %s"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Dimoni (%s) inclou:\n"
-#: ../../interactive/stdio.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Quina 閟 la vostra elecci? (0/1, predeterminat '%s')"
+msgid "%d comma separated numbers"
+msgstr "%d nombres separats per coma"
-#: ../../interactive/stdio.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Entrades que heu d'emplenar:\n"
-"%s"
+"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
+"qui est connectat en altres ordinadors de la mateixa."
-#: ../../modules/interactive.pm:1
+#
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Configuraci automatitzada dels passos"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Ha fallat la c鄏rega del m騞ul %s.\n"
-"Voleu tornar-ho a intentar amb altres par鄊etres?"
+"Voleu saber m閟 coses de la comunitat del Codi Font Obert? Uniu-vos al m髇 "
+"del Codi Font Obert"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Especifica les opcions"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Autoprobe"
-msgstr "Exploraci autom鄑ica"
+msgid "Please select data to backup..."
+msgstr "Seleccioneu les dades de les quals voleu fer la c騪ia..."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"En alguns casos, el controlador de %s necessita informaci addicional\n"
-"per funcionar correctament, tot i que normalment funciona b sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el controlador\n"
-"cerqui al vostre ordinador la informaci que necessita? Aquesta recerca\n"
-"podria penjar l'ordinador, per aix no causaria cap dany."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin controlador de %s he de provar?"
+msgid "received"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Module options:"
-msgstr "Opcions del m騞ul:"
+msgid "/File/_New"
+msgstr "/Fitxer/_Nou"
-#: ../../modules/interactive.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les opcions per al m騞ul %s.\n"
-"Les opcions estan en el format \"nom=valor nom2=valor2 ...\".\n"
-"Per exemple, \"io=0x300 irq=7\""
+msgid "The DNS Server IP"
+msgstr "IP del Servidor DNS"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "IP Range End:"
msgstr ""
-"Ara podeu subministrar les opcions per al m騞ul %s.\n"
-"Tingueu en compte que qualsevol adre鏰 s'ha de prefixar amb 0x, com '0x123'"
-#: ../../modules/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(m騞ul %s)"
+msgid "High"
+msgstr "Alt"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'est instal穕ant el controlador per a la targeta de %s %s"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Mira la informaci del maquinari"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "aquest camp descriu el dispositiu"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interf韈ie %s?"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "S'est afegint la impressora a Star Office/OpenOffice.org/GIMP"
-#: ../../modules/interactive.pm:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
+msgid "Local Printers"
+msgstr "Impressores locals"
-# #msgid "Found %s %s interfaces"
-# #msgstr "S'han trobat interf韈ies %2$s %1$s"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "S'han trobat interf韈ies %s %s"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (instal穕aci del controlador de pantalla)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ara podeu configurar cada par鄊etre del m騞ul."
+msgid "NIS Server"
+msgstr "Servidor NIS"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated strings"
-msgstr "cadenes separades per coma"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Port"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "nombres separats per coma"
+msgid "Spain"
+msgstr "Espanya"
-#: ../../modules/parameters.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d cadenes separades per coma"
+msgid "This user name has already been added"
+msgstr "Aquest nom d'usuari ja s'ha afegit"
-#: ../../modules/parameters.pm:1
+#
+#: ../../interactive.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d nombres separats per coma"
+msgid "Choose a file"
+msgstr "Trieu un fitxer"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "a number"
-msgstr "un n鷐ero"
+msgid "Apply"
+msgstr "Aplica"
-#: ../../network/adsl.pm:1
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Detectada autom鄑icament"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "Internet Connection Sharing currently disabled"
+msgstr "La connexi a Internet compartida est inhabilitada"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La manera m閟 habitual de connectar amb ADSL 閟 pppoe.\n"
-"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
-"Si no ho sabeu, escolliu 'utilitza pppoe'"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Connecta't a Internet"
+msgid "Belgium"
+msgstr "B鑜gica"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
+msgid "Choose the window manager to run:"
+msgstr "Escolliu el gestor de finestres per executar:"
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "use dhcp"
-msgstr "utilitza dhcp"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "use pptp"
-msgstr "utilitza pptp"
+msgid "First Time Wizard"
+msgstr "Auxiliar per a la primera vegada"
-#: ../../network/adsl.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "utilitza pppoe"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"S'ha produ飔 un error, per no s com gestionar-lo correctament.\n"
+"Si continueu, 閟 sota la vostra responsabilitat."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Other ports"
-msgstr "Altres ports"
+msgid "please wait, parsing file: %s"
+msgstr "espereu si us plau, s'est analitzant el fitxer: %s"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Tail鄋dia"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Tot (sense tallafoc)"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"El port introdu飔 no 閟 v鄉id: %s.\n"
-"El format correcte 閟 \"port/tcp\" o \"port/udp\", \n"
-"on el port es troba entre 1 i 65535."
+"Per poder imprimir amb la Lexmark inkjet i amb aquesta configuraci, "
+"necessiteu els controladors de la impressora inkjet proporcionats per "
+"Lexmark (http://www.lexmark.com/). Dins de la web de Lexmark, feu clic al "
+"bot \"Controladors\" i trieu la secci d'impressores. Aleshores escolliu el "
+"vostre model i despr閟 \"Linux\" com a sistema operatiu. Els controladors "
+"v閚en en paquets RPM o en seqncies per a l'int鑢pret d'ordres amb una "
+"instal穕aci gr鄁ica interactiva. No necessiteu fer aquesta configuraci amb "
+"la interf韈ie gr鄁ica. Cancel穕eu directament despr閟 de l'acord de "
+"llic鑞cia. Llavors imprimiu p鄃ines d'alineaci dels cap鏰ls d'impressi amb "
+"l'ordre \"lexmarkmaintain\" i ajusteu l'alineaci dels cap鏰ls amb aquest "
+"programa."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Podeu introduir diferents ports.\n"
-"S髇 exemples v鄉ids: 139/tcp 139/udp.\n"
-"Cerqueu informaci a /etc/services"
+msgid "Permissions"
+msgstr "Permisos"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "A quins serveis voleu permetre la connexi des d'Internet?"
+msgid "Provider name (ex provider.net)"
+msgstr "Nom del prove飀or (p.ex. proveidor.net)"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Configuraci del drakfirewall\n"
-"\n"
-"Assegureu-vos d'haver configurat l'acc閟 a la xarxa local/Internet\n"
-"amb el drakconnect abans de continuar."
+msgid "Version: %s\n"
+msgstr "Versi: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Configuraci del drakfirewall\n"
-"\n"
-"Aqu es configura un tallafocs personal per a aquest ordinador Linux "
-"Mandrake.\n"
-"Per a una potent soluci de tallafocs dedicada, consulteu si us plau la \n"
-"distribuci especialitzada MandrakeSecurity Firewall."
+"El vostre sistema est baix de recursos; podeu tenir algun problema en\n"
+"instal穕ar el Mandrake Linux. Si aix passa, podeu provar d'instal穕ar-lo "
+"en\n"
+"mode text. Per fer-ho, premeu 'F1' en arrencar des del CD-ROM i escriviu "
+"'text'."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No network card"
-msgstr "No s'ha trobat cap targeta de xarxa"
+msgid "Use the Windows partition for loopback"
+msgstr "Utilitza la particio Windows per al loopback"
-#
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Servidor POP i IMAP"
+msgid "Armenian (typewriter)"
+msgstr "Armeni (m鄎uina d'escriure)"
-#
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Mail Server"
-msgstr "Servidor de correu"
+msgid "Connection type: "
+msgstr "Tipus de connexi: "
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Domain Name Server"
-msgstr "Servidor de Noms de Domini (DNS)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "Interf韈ie gr鄁ica a l'inici"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Servidor Web"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "Xfree %s amb acceleraci 3D de maquinari"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "India"
+msgstr "蚽dia"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host name"
-msgstr "Nom de l'ordinador central"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Nom de l'ordinador central"
+msgid "Chad"
+msgstr "Txad"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+msgid "Slovakia"
+msgstr "Eslov鄎uia"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "S'est configurant la xarxa"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
+msgid "Cambodia"
+msgstr "Cambodja"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Escolliu la interf韈ie de xarxa"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Sincronitzaci horitzontal del monitor: %s\n"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-"No puc configurar aquest tipus de connexi."
+msgid "Path"
+msgstr "Cam"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Quin client dhcp voleu utilitzar?\n"
-"El predeterminat 閟 dhcp-client"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-"pantalla seg黣nt."
+"El sistema d'impressi (%s) no s'arrencar autom鄑icament quan l'ordinador "
+"s'inici.\n"
+"\n"
+"蓅 possible que l'arrencada autom鄑ica fos deshabilitada en canviar a un "
+"nivell de seguretat m閟 alt, perqu el sistema d'impressi 閟 un punt d'atac "
+"potencial.\n"
+"\n"
+"Voleu tornar a habilitar l'arrencada autom鄑ica del sistema d'impressi?"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"S'ha detectat una targeta PCI XDSI, per no es reconeix el tipus. Si us "
-"plau, seleccioneu una targeta PCI a la pantalla seg黣nt."
+"Impressora %s\n"
+"Quines modificacions voleu fer en aquesta impressora?"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Quina targeta XDSI teniu?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Configuraci de l'XDSI"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Abandona"
+msgid "Add host"
+msgstr "Afegeix un usuari"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Continue"
-msgstr "Continua"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"Voleu permetre als usuaris compartir alguns dels seus directoris?\n"
+"Fer aix permetr al usuaris fer un simple clic a \"Comparteix\" en el "
+"konqueror i el nautilus.\n"
"\n"
-"Si teniu una targeta ISA, els valors de la pantalla seg黣nt haurien de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, cal que en sapigueu l'\"irq\" i l'\"io\".\n"
+"\"Personalitzat\" permet configurar cada usuari per separat.\n"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "I don't know"
-msgstr "No ho s"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Si us plau, carregueu o deseu la selecci de paquets en el disquet.\n"
+"El format 閟 el mateix que en els disquets generats d'instal穕aci "
+"autom鄑ica."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "China (broadcast)"
+msgstr "Xina (difusi)"
-#: ../../network/isdn.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Use quota for backup files."
+msgstr "Usa la quota de disc per als fitxers de c騪ia de seguretat."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
+msgid "Configuring printer \"%s\"..."
+msgstr "S'est configurant la impressora \"%s\"..."
-#: ../../network/isdn.pm:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "S'ha trobat la interf韈ie \"%s\". Voleu utilitzar-la?"
+msgid "Internet connection"
+msgstr "Connexi a Internet"
-#: ../../network/isdn.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Quin protocol voleu utilitzar?"
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"Ha fallat la c鄏rega del m騞ul %s.\n"
+"Voleu tornar-ho a intentar amb altres par鄊etres?"
-#
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocol per a la resta del m髇"
+msgid "Welcome to the Open Source world."
+msgstr "Benvingut al m髇 del Codi Font Obert"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bosnia and Herzegovina"
+msgstr "B騭nia i Hercegovina"
#
-#: ../../network/isdn.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"Protocol per a la resta del m髇\n"
-"Cap canal D (l韓ies punt a punt)"
+"Necessiteu un sistema de fitxers real (ext2/ext3, reiserfs, xfs o jfs) per a "
+"aquest punt de muntatge\n"
#
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Protocol europeu"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Si us plau, introdu飖 el nom de l'ordinador o la IP."
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Netherlands"
+msgstr "Pa飐os Baixos"
#
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "S'estan enviant els fitxers..."
+
#: ../../network/isdn.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocol europeu (EDSS1)"
+msgid "Internal ISDN card"
+msgstr "Targeta XDSI interna"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-"Seleccioneu el vostre prove飀or.\n"
-"Si no 閟 a la llista, seleccioneu \"No 閟 a la llista\""
+"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
+"de so (%s), que actualment fa servir \"%s\""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "M騞em XDSI extern"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Taula"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
+msgid "Install & convert Fonts"
+msgstr "Instal穕a i converteix les Fonts"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Quin tipus de connexi XDSI teniu?"
+msgid "WARNING"
+msgstr "AV蚐"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Auxiliar de configuraci de xarxa"
+msgid "Installing bootloader"
+msgstr "S'est instal穕ant el carregador de l'arrencada"
-#
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "Repeteix"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Configuraci antiga (isdn4net)"
+msgid "detected %s"
+msgstr "s'ha detectat %s"
-#
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova configuraci (isdn-light)!"
+msgid "Virgin Islands (U.S.)"
+msgstr "Illes Verge Americanes"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
+msgid "Bad backup file"
+msgstr "Fitxer de c騪ia de seguretat incorrecte"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
"\n"
-"We recommand the light configuration.\n"
+"What would you like to do?"
msgstr ""
-"Quina configuraci XDSI preferiu?\n"
-"\n"
-"* La configuraci antiga usa isdn4net. Cont eines molt\n"
-" potents, per 閟 dif韈il de configurar, i no 閟 est鄋dard.\n"
-"\n"
-"* La nova configuraci 閟 m閟 f郼il d'entendre, m閟\n"
-" est鄋dard, per t menys eines.\n"
+"La configuraci de la connexi compartida a Internet ja s'ha dut a terme.\n"
+"Ara est inhabilitada.\n"
"\n"
-"Nosaltres recomanen la nova configuraci senzilla (isdn-light).\n"
+"Qu voleu fer?"
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "per que no coincideixin amb"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Instal穕a"
+msgid "Pipe into command"
+msgstr "Redirecciona el treball cap a una ordre"
-#: ../../network/modem.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Part del maquinari del vostre ordinador necessita controladors\n"
+"\"registrats\" per poder funcionar. Podeu trobar-ne informaci a: %s"
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Taula"
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detecting devices..."
+msgstr "S'estan detectant els dispositius..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
+msgstr "Feu clic aqu per executar l'auxiliar ->"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Haiti"
+msgstr "Hait"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Description of the fields:\n"
+"\n"
msgstr ""
+"Descripci dels camps:\n"
+"\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "el nom del venedor del dispositiu"
+
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
+msgid "Refreshing printer data..."
+msgstr "S'estan refrescant les dades de les impressores..."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install2.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
+msgid "You must also format %s"
+msgstr "Tamb heu de formatar %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Nom de domini"
+msgid "Be careful: this operation is dangerous."
+msgstr "Aneu amb compte: aquesta operaci 閟 perillosa."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Insert a floppy containing package selection"
+msgstr "Inseriu un disquet amb la selecci de paquets"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Basat en script"
+msgid "Server: "
+msgstr "Servidor: "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../standalone/draksec:1
#, c-format
-msgid "Terminal-based"
-msgstr "Basat en terminal"
+msgid "Security Alerts:"
+msgstr "Alarmes de seguretat:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Sweden"
+msgstr "Su鑓ia"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Login ID"
-msgstr "ID d'entrada"
+msgid "Use Expect for SSH"
+msgstr "Usa Expect en l'SSH"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "N鷐ero de tel鑖on"
+msgid "Poland"
+msgstr "Pol騨ia"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Nom de la connexi"
+msgid "Importance: %s\n"
+msgstr "Import鄋cia: %s\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialup options"
-msgstr "Opcions de marcatge"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Marqueu aquesta opci si voleu expulsar la cinta en acabar."
-#: ../../network/modem.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port s鑢ie al qual teniu connectat el m騞em."
+msgid "Other ports"
+msgstr "Altres ports"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Configuraci de xarxa"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "nombre de mem騬ies interm鑔ies per a captures amb MMAP"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "SMBus controllers"
msgstr ""
-"Hi ha hagut problemes durant la configuraci.\n"
-"Proveu la connexi via net_monitor o mcc. Si la connexi no funciona "
-"correctament, torneu a executar la configuraci."
-#: ../../network/netconnect.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Despr閟 d'aix, 閟 recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador central."
+msgid "Connection timeout (in sec)"
+msgstr "Temps m鄕im per connectar (en seg)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Felicitats, la configuraci de xarxa i Internet ha finalitzat.\n"
-"Ara s'aplicar la configuraci al sistema.\n"
-"\n"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produ飔 un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
+msgid "Croatian"
+msgstr "Croata"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Cal instal穕ar el paquet %s. Voleu instal穕ar-lo?"
+msgid "Use existing partition"
+msgstr "Utilitza les particions existents"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Configuraci de xarxa"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "No es pot bifurcar: %s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexi en arrencar?"
+msgid "/Help/_About..."
+msgstr "/Ajuda/_Quant a.."
-#
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection"
-msgstr "Connexi a Internet"
+msgid "Remove user directories before restore."
+msgstr "Esborra els directoris d'usuari abans de restaurar."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Heu configurat m鷏tiples maneres de conectar-se a Internet.\n"
-"Escolliu la que voleu utilitzar.\n"
-"\n"
+"Esteu a punt de configurar una impressora remota. Aix necessita una "
+"connexi de xarxa operativa, per la vostra xarxa encara no est "
+"configurada. Si continueu sense configurar la xarxa, no podreu utilitzar la "
+"impressora que esteu configurant ara. Qu voleu fer?"
#
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu la connexi que voleu configurar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Configuraci de la \"winprinter\" OKI"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "s'han detectat una o diverses targetes Ethernet"
+msgid "could not find any font in your mounted partitions"
+msgstr "no s'ha pogut trobar cap font en les particions muntades"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "LAN connection"
-msgstr "Connexi LAN"
+msgid "F00f bug"
+msgstr ""
-#
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "s'ha detectat la connexi per cable"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Connexi per cable"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Quin client dhcp voleu utilitzar?\n"
+"El predeterminat 閟 dhcp-client"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "detected"
-msgstr "s'ha detectat %s"
+msgid "Domain Name:"
+msgstr "Nom de domini"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Disquet d'arrencada"
#
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ADSL connection"
-msgstr "Connexi ADSL"
+msgid "Restore"
+msgstr "Restaura"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "detected %s"
-msgstr "s'ha detectat %s"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Connexi XDSI"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Connexi normal per m騞em"
+msgid "Looking for available packages..."
+msgstr "S'estan cercant els paquets disponibles..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detectat al port %s"
+msgid "Init Message"
+msgstr "Missatge d'inicialitzaci"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Connexi normal per m騞em"
+msgid "Rescue partition table"
+msgstr "Recupera la taula de particions"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Velocitat de la connexi"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
+msgid "Cyprus"
+msgstr "Xipre"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Mode expert"
+msgid "Remove from RAID"
+msgstr "Elimina del RAID"
-#: ../../network/netconnect.pm:1
+# c-format
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Utilitza la detecci autom鄑ica"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Aquesta clau de xifratge 閟 massa senzilla (ha de tenir com a m韓im %d "
+"car郼ters)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Escolliu el perfil a configurar"
+msgid "Configuration Wizards"
+msgstr "Auxiliars de configuraci"
#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvingut a l'auxiliar de configuraci de xarxa\n"
-"\n"
-"Ara es configurar la connexi a Internet/xarxa.\n"
-"Si no voleu utilitzar la detecci autom鄑ica, desactiveu el quadre de "
-"verificaci.\n"
+msgid "ISDN connection"
+msgstr "Connexi XDSI"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"At鑣 que esteu realitzant una instal穕aci des de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a 'D'acord' per conservar la configuraci, o a 'Cancel穕a' per "
-"tornar a configurar la connexi a Internet i a la xarxa local.\n"
+msgid "primary"
+msgstr "primari"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " en servidor SMB/Windows \"%s\", recurs compartit \"%s\""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Ara podeu triar quins serveis voleu que s'inici飊 durant l'arrencada.\n"
"\n"
+"Aqu es llisten tots els serveis disponibles amb la instal穕aci actual.\n"
+"Reviseu-los amb cura i desmarqueu aquells que no seran necessaris sempre\n"
+"durant l'arrencada.\n"
"\n"
+"Podeu obtenir una explicaci breu sobre un servei si el seleccioneu. Si no\n"
+"esteu segur de la utilitat d'un servei, el m閟 segur 閟 deixar el "
+"comportament\n"
+"per defecte.\n"
"\n"
-"Ara es configurar la connexi %s.\n"
-"\n"
-"\n"
-"Premeu D'acord per continuar."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ara es configurar la connexi %s."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Connexi i configuraci d'Internet"
-
-#
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Configura la connexi"
+"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
+"com\n"
+"a servidor: segurament no us interessar iniciar serveis que no necessiteu.\n"
+"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
+"en un servidor. En general, seleccioneu nom閟 els serveis que realment "
+"necessiteu."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Desconnecta"
+msgid "Skip"
+msgstr "Omet"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect"
-msgstr "Connecta"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"\n"
-"Podeu tornar a configurar la connexi."
+"Activa/Desactiva totes les interf韈ies de xarxa configurades per\n"
+"iniciar-se durant l'arrencada."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"\n"
-"Podeu connectar-vos a Internet o tornar a configurar la connexi."
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Ara mateix no esteu connectat a Internet."
+msgid "important"
+msgstr "important"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "Progr閟 total"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"You can disconnect or reconfigure your connection."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"El DrakX detectar qualsevol dispositiu IDE en l'ordinador. Aix mateix, \n"
+"intentar trobar un o m閟 adaptadors SCSI PCI. Si troba un adaptador SCSI,\n"
+"el DrakX instal穕ar autom鄑icament el controlador adequat.\n"
"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexi."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Ara mateix esteu connectat a Internet."
+"Com que la detecci de maquinari no sempre troba tots els dispositius,\n"
+"el DrakX us demanar que confirmeu si hi ha un adaptador SCSI PCI. Feu clic\n"
+"a \"S韁" si sabeu segur que n'hi ha un instal穕at en l'ordinador. "
+"Apareixer郳n"
+"una llista de targetes SCSI perqu n'escolliu una. Feu clic a \"No\" si no "
+"en\n"
+"teniu cap. Si no n'esteu segurs, podeu mirar la llista de maquinari\n"
+"detectat en el vostre ordinador seleccionant \"Veure informaci del "
+"maquinari\"\n"
+"i fent clic a \"D'acord\". Examineu la llista de maquinari i feu clic sobre\n"
+"el bot \"D'acord\" per tornar a la pregunta sobre l'interf韈ie SCSI.\n"
+"\n"
+"Si heu de seleccionar l'adaptador manualment, el DrakX us preguntar si\n"
+"voleu confifurar-ne les opcions. Conv que deixeu que el DrakX comprovi\n"
+"el maquinari per inicialitzar les opcions especifiques d'algunes targetes.\n"
+"Aix sol funcionar b.\n"
+"\n"
+"Si el DrakX no pot comprovar les opcions que se li han de passar al "
+"controlador,\n"
+"us caldr proporcionar les opcions al controlador manualment. Consulteu la\n"
+"Guia de l'usuari (cap韙ol 3, en la secci \"Informaci obtinguda del "
+"maquinari\")\n"
+"per saber com treure aquesta informaci de la documentaci del maquinari,\n"
+"del lloc web del fabricant (si teniu acc閟 a Internet) o del Microsoft "
+"Windows\n"
+"(si el teniu al sistema)."
#
-#: ../../network/network.pm:1
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "L'URL ha de comen鏰r amb 'ftp:' o 'http:'"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "El servidor intermediari ha de ser http://..."
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "Intermediari per a FTP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "HTTP proxy"
-msgstr "Intermediari per a HTTP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "Configuraci dels servidors intermediaris (proxies)"
-
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "L'adre鏰 de la passarel穕a ha d'estar en format 1.2.3.4"
+msgid "Users"
+msgstr "Usuaris"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "L'adre鏰 del servidor DNS ha d'estar en format 1.2.3.4"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Dispositiu de la passarel穕a"
+msgid "Preparing bootloader..."
+msgstr "S'est preparant el carregador de l'arrencada..."
#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Passarel穕a (e.g. %s)"
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Servidor DNS"
+msgid "The passwords do not match"
+msgstr "Les contrasenyes no coincideixen"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Examples for correct IPs:\n"
msgstr ""
-"Si us plau, introdu飖 el nom del vostre ordinador central.\n"
-"Aquest nom ha de ser complet, com ara \"mybox.mylab.myco.com\".\n"
-"Tamb podeu introduir l'adre鏰 IP de la passarel穕a, si en teniu una."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Frequency (MHz)"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
+"Per utilitzar aquesta selecci de paquets que heu desat, arrenqueu la "
+"instal穕aci amb \"linux defcfg=floppy\""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adre鏰 IP ha d'estar en format 1.2.3.4"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of the processor"
+msgstr "el color de la barra de progr閟"
#
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Inicia en l'arrencada"
+msgid "Hardware clock set to GMT"
+msgstr "El rellotge del vostre ordinador est regulat per GMT"
#
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Si us plau, introdu飖 el nom de l'ordinador o la IP."
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Configuraci de xarxa"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Give a file name"
+msgstr "Proporcioneu un nom de fitxer"
-#: ../../network/network.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "Please choose the port that your printer is connected to."
msgstr ""
-"Fes el seguiment de l'identificador de la targeta de xarxa (d'utilitat per a "
-"port鄑ils)"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Nom de l'ordinador central"
+"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Netmask"
-msgstr "Subm鄐cara de xarxa"
+msgid "Change Cd-Rom"
+msgstr "Canvieu el CD-ROM"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP address"
-msgstr "Adre鏰 IP"
+msgid "Paraguay"
+msgstr "Paraguai"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
+"Usa les c騪ies de seguretat incrementals (no reemplacis les c騪ies antigues)"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP autom鄑ica"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
+msgid "force"
+msgstr "imposa"
-#: ../../network/network.pm:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "S'est configurant el dispositiu de xarxa %s"
+msgid "Exit"
+msgstr "Surt"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"Si us plau, introdu飖 la configuraci IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com una adre鏰 IP en notaci decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
+"NOTA: Segons el model de la impressora i el sistema d'impressi, "
+"s'instal穕aran fins a %d MB de programari addicional."
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"ATENCI: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
-"Nom閟 cal que accepteu per mantenir-lo configurat.\n"
-"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuraci."
+"No teniu cap interf韈ie configurada.\n"
+"Configureu-la primer fent clic a 'Configura'"
-#: ../../network/shorewall.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Estonian"
+msgstr "Estoni"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Atenci! S'ha detectat una configuraci existent del tallafoc. Potser us "
-"caldr fer algun ajustament manual despr閟 de la instal穕aci."
+"L'Apache 閟 un servidor de World Wide Web. S'utilitza per servir fitxers\n"
+"HTML i CGI."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuraci del tallafoc!"
+msgid "Add/Del Clients"
+msgstr "Afegeix/Suprimeix clients"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Account Password"
-msgstr "Contrasenya del compte"
+msgid "Choose the network interface"
+msgstr "Escolliu la interf韈ie de xarxa"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
+msgid "Unknown Model"
+msgstr "Model desconegut"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Temps m鄕im per connectar (en seg)"
+msgid "CD/DVD burners"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partici arrencada per defecte\n"
+" (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
#
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "trieu un fitxer d'imatge"
+
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Velocitat de la connexi"
+msgid "Firewalling configuration detected!"
+msgstr "S'ha detectat la configuraci del tallafoc!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
+msgid "Connection name"
+msgstr "Nom de la connexi"
-#
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Choose your country"
-msgstr "Escolliu el vostre pa韘"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"coordenada x de la caixa de text\n"
+"en nombre de car郼ters"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del prove飀or (opcional)"
+msgid "Updating package selection"
+msgstr "S'est actualitzant la selecci de paquets"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "On voleu muntar el fitxer de loopback %s?"
+
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del prove飀or (opcional)"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"El disquet s'ha creat correctament.\n"
+"Ara podeu repetir la vostra instal穕aci."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "el color de la barra de progr閟"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider phone number"
-msgstr "N鷐ero de tel鑖on del prove飀or"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
+"Si us plau, entreu el directori (o m騞ul) d'aquest\n"
+"ordinador central on voleu desar la c騪ia de seguretat."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del prove飀or (p.ex. proveidor.net)"
+msgid "Replay"
+msgstr "Repeteix"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "El vostre tel鑖on particular"
+msgid "Backup other files"
+msgstr "C騪ia de seguretat d'altres fitxers"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 de la Targeta"
+msgid "No floppy drive available"
+msgstr "No hi ha cap unitat de disquet disponible"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card IO_0"
-msgstr "E/S_0 de la Targeta"
+msgid "Backup files are corrupted"
+msgstr "Els fitxers de la c騪ia de seguretat estan corromputs"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Card IO"
-msgstr "E/S de la Targeta"
+msgid "TV norm:"
+msgstr "Normativa de TV:"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Targeta de mem騬ia (DMA)"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de la targeta"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litu AZERTY (nou)"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Configuraci de la connexi"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexi."
+"Heu seleccionat una partici de programari RAID com a arrel (/).\n"
+"Aix no ho pot gestionar cap carregador d'arrencada sense una partici /"
+"boot.\n"
+"Per tant, assegureu-vos d'afegir una partici /boot"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectar."
+#
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Previous"
+msgstr "Anterior"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ara, el sistema est connectat a Internet."
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "Un altre SO (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "S'est comprovant la vostra connexi..."
+msgid "To activate the mouse,"
+msgstr "Per activar el ratol,"
-#: ../../network/tools.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
+msgid "Bringing up the network"
+msgstr "S'est activant la xarxa"
-#: ../../network/tools.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Configuraci d'Internet"
+msgid "Screenshots will be available after install in %s"
+msgstr "Les captures estaran disponibles despr閟 d'instal穕ar a %s"
-#: ../../partition_table/raw.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"Alguna cosa no va b en la vostra unitat. \n"
-"Ha fallat una comprovaci de la integritat de les dades. \n"
-"Aix vol dir que qualsevol cosa que s'escrigui al disc acabar feta malb."
+"S'ha detectat m閟 d'una partici de Microsoft Windows en la unitat de disc.\n"
+"Si us plau, trieu quina d'elles voleu redimensionar per instal穕ar el nou\n"
+"sistema operatiu Mandrake Linux.\n"
+"\n"
+"Cada partici est identificada d'aquesta manera:\n"
+"\"Nom Linux\", \"Nom Windows\" \"Capacitat\".\n"
+"\n"
+"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"n鷐ero d'unitat "
+"de \n"
+"disc\", \"n鷐ero de la partici骪" (per exemple, \"hda1\").\n"
+"\n"
+"\"Tipus d'unitat de disc\" 閟 \"hd\" si la vostre unitat de disc 閟 IDE i \n"
+"\"sd\" si 閟 SCSI.\n"
+"\n"
+"\"N鷐ero de la unitat de disc\" 閟 sempre una lletra despr閟 de \"hd\" o \"sd"
+"\".\n"
+"Amb unitats de disc IDE:\n"
+"\n"
+" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
+"\n"
+" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
+"\",\n"
+"\n"
+" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
+"\",\n"
+"\n"
+" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
+"\".\n"
+"\n"
+"Amb les unitats de disc SCSI, una \"a\" significa \"unitat prim鄏ia de disc"
+"\",\n"
+"una \"b\" significa \"unitat secund鄏ia de disc\", etc.\n"
+"\n"
+"\"Nom Windows\" 閟 la lletra de la vostra unitat de disc sota Windows (el "
+"primer\n"
+"disc o partici s'anomena \"C:\")."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Predeterminat)"
+msgid "Tanzania"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "en servidor CUPS \"%s\""
+msgid "Computing FAT filesystem bounds"
+msgstr "S'estan calculant els l韒its del sistema de fitxers de la FAT"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Fonts de la c騪ia: \n"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Content of the file"
+msgstr "Contingut del fitxer"
#
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Impressores remotes"
+msgid "Authentication LDAP"
+msgstr "Autenticaci LDAP"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Perfil: "
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "(on this machine)"
-msgstr "(en aquest ordinador)"
+msgid "transmitted"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Selecci del cam"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/data.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "%d comma separated strings"
+msgstr "%d cadenes separades per coma"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Here is the full list of keyboards available"
+msgstr "Aquesta 閟 la llista completa de teclats disponibles"
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Theme name"
+msgstr "Nom del tema"
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "/_Help"
+msgstr "/_Ajuda"
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "the width of the progress bar"
+msgstr "l'amplada de la barra de progr閟"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Cook Islands"
+msgstr "Illes Cook"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Model desconegut"
+msgid "Formatting partition %s"
+msgstr "S'est formatant la partici %s"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown model"
-msgstr "Model desconegut"
+msgid "Hostname required"
+msgstr "El nom de l'ordinador central (host) 閟 necessari"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Port"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr "Desselecciona les fonts instal穕ades"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Nom de l'ordinador central"
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Cancel"
+msgstr "Cancel穕a"
-#
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Xarxa"
+msgid "Searching for configured scanners ..."
+msgstr "Impressores disponibles"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Interf韈ie %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Rodeta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Adre鏰 de la xarxa local"
+msgid "Videocard"
+msgstr "Mode de v韉eo"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Impressora en cru (raw) (Cap controlador)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tLes c騪ies de seguretat utilitzen tar i bzip2\n"
-#: ../../printer/main.pm:1
+#
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid ", using command %s"
-msgstr ", utilitzant l'ordre %s"
+msgid "Remove Selected"
+msgstr "Elimina la selecci"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " en servidor Novell \"%s\", impressora \"%s\""
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Detectada autom鄑icament"
-#: ../../printer/main.pm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " en servidor SMB/Windows \"%s\", recurs compartit \"%s\""
+msgid "Remove printer"
+msgstr "Suprimeix la impressora"
-#: ../../printer/main.pm:1
+#
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", port %s"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ATENCI!\n"
+"\n"
+"Tot seguit, el DrakX canviar la mida de la vostra partici de Windows. Aneu "
+"amb\n"
+"compte: aquesta operaci 閟 perillosa. Si encara no ho heu fet, sortiu de "
+"la\n"
+"instal穕aci, executeu l'Scandisk sota Windows (i potser tamb el defrag) i\n"
+"torneu a comen鏰r la instal穕aci. Feu tamb una c騪ia de seguretat de les\n"
+"vostres dades.\n"
+"Quan estigueu segur, premeu \"D'acord\"."
-#: ../../printer/main.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LPD \"%s\", impressora \"%s\""
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "A quins serveis voleu permetre la connexi des d'Internet?"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printing to %s"
-msgstr ", imprimint a %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Benvingut a la utilitat de configuraci del correu.\n"
+"\n"
+"Aqu podreu configurar el sistema d'alerta.\n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ", multi-function device"
-msgstr ", dispositiu multifunci"
+msgid "Other"
+msgstr "Altres"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositiu multifunci en HP JetDirect"
+msgid "Default"
+msgstr "Predeterminat"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dispositiu multifunci en USB"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", dispositiu multifunci en port paral穕el \\/*%s"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", USB printer"
-msgstr ", impressora USB \\/*%s"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", USB printer \\#%s"
-msgstr ", impressora USB \\/*%s"
+msgid "Button 2 Emulation"
+msgstr "Emulaci del bot 2"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " on parallel port \\#%s"
-msgstr " en port paral穕el \\/*%s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "type1inst building"
+msgstr "construcci de type1inst"
#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printers"
-msgstr "Impressores locals"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Redirecciona el treball cap a una ordre"
+msgid "choose image file"
+msgstr "trieu un fitxer d'imatge"
-#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Entreu un dispositiu URI d'impressora"
+msgid "X server"
+msgstr "Servidor X"
-#
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Impressora en servidor NetWare"
+msgid "Domain Admin User Name"
+msgstr "Nom d'usuari de l'administrador del domini"
#
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impressora en servidor SMB/Windows 95/98/NT"
+msgid "There was an error while scanning for TV channels"
+msgstr "S'ha produ飔 un error en cercar els canals de TV"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora de xarxa (TCP/Socket)"
+msgid "US keyboard (international)"
+msgstr "Teclat Estats Units (internacional)"
#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Impressora en servidor lpd remot"
+msgid "Not installed"
+msgstr "No instal穕at"
-#
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Impressora en servidor CUPS remot"
+msgid "LAN connection"
+msgstr "Connexi LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote printer"
-msgstr "Impressora remota"
+msgid "/File/-"
+msgstr "/Fitxer/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Impressora local"
+msgid "Italian"
+msgstr "Itali"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Configuring applications..."
-msgstr "S'estan configurant les aplicacions..."
+msgid "Basic"
+msgstr "B鄐ic"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
+"\\@mandrakesoft.com>"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "S'est suprimint la impressora \"%s\"..."
+msgid "Honduras"
+msgstr "Hondures"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu realment suprimir la impressora \"%s\"?"
+msgid "pdq"
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remove printer"
-msgstr "Suprimeix la impressora"
+msgid "Card IO"
+msgstr "E/S de la Targeta"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Apreneu a utilitzar aquesta impressora"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "when checked, owner and group won't be changed"
+msgstr "si ho marqueu, no es canviaran ni el propietari ni el grup"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Imprimeix la(es) p鄃ina(es) de prova"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Aquesta partici especial\n"
+"Bootstrap 閟 per arrencar\n"
+"el vostre sistema en dual.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-"蓅 impossible de suprimir la impressora \"%s\" d'Star Office/OpenOffice.org/"
-"GIMP."
+"Si us plau, escolliu per cada pas si es repetir la vostra instal穕aci o si "
+"ser manual"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"La impressora \"%s\" ha estat suprimida d'Star Office/OpenOffice.org/GIMP "
-"amb 鑨it."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "S'est suprimint la impressora d'Star Office/OpenOffice.org/GIMP"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Xarxa per FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Suprimeix aquesta impressora de Star Office/OpenOffice.org/GIMP"
+msgid "Russian (Yawerty)"
+msgstr "Rus (Yawerty)"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"蓅 impossible d'afegir la impressora \"%s\" a Star Office/OpenOffice.org/"
-"GIMP."
+msgid "You must enter a device or file name!"
+msgstr "Heu d'entrar un nom de dispositiu o de fitxer!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_Quit"
+msgstr "/_Surt"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"S'ha afegit correctament la impressora \"%s\" a Star Office/OpenOffice.org/"
-"GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "S'est afegint la impressora a Star Office/OpenOffice.org/GIMP"
+msgid "Graphics memory: %s kB\n"
+msgstr "Mem騬ia gr鄁ica: %s kB\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Afegeix aquesta impressora a Star Office/OpenOffice.org/GIMP"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" Aquest programa 閟 programari lliure; el podeu redistribuir i/o modificar\n"
+" sota els termes de la 'GNU General Public License' publicada per\n"
+" la Free Software Foundation; tant la versi 2 com (si voleu)\n"
+" qualsevol versi posterior.\n"
+"\n"
+" Aquest programa 閟 distribueix amb l'esperan鏰 que ser 鷗il,\n"
+" per SENSE CAP GARANTIA; sense ni tant sols la garantia impl韈ita de\n"
+" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROP襍IT. Mireu la\n"
+" 'GNU General Public License' per a m閟 detalls.\n"
+"\n"
+" Haur韊u d'haver rebut una c騪ia de la 'GNU General Public License'\n"
+" amb el programa; si no 閟 aix, escriviu a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impressora \"%s\" 閟 ara la impressora per defecte."
+msgid "access to compilation tools"
+msgstr "acc閟 a les eines de compilaci"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Default printer"
-msgstr "Impressora predeterminada"
+msgid "Please select data to restore..."
+msgstr "Si us plau, seleccioneu les dades per restaurar..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Fes que aquesta sigui la impressora predeterminada"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2048\n"
+"sectors n'hi ha prou) al comen鏰ment del disc"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Opcions de la impressora"
+msgid "Standard test page"
+msgstr "P鄃ina de prova est鄋dard"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Fabricant de la impressora, model"
+msgid "Create"
+msgstr "Crea"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricant de la impressora, model, controlador"
+msgid "What"
+msgstr "Qu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "S'est suprimint la impressora antiga \"%s\"..."
+msgid "There was an error ordering packages:"
+msgstr "S'ha produ飔 un error en ordenar els paquets:"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Nom de la impressora, descripci, ubicaci"
+msgid "Bulgarian (BDS)"
+msgstr "B鷏gar (BDS)"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tipus de connexi de la impressora"
+msgid "Disable Server"
+msgstr "Inhabilita el servidor"
#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Raw printer"
-msgstr "Impressora en cru (raw)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Fes-ho!"
+msgid "Filesystem encryption key"
+msgstr "Clau de xifratge del sistema de fitxers: "
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Close"
-msgstr "Tanca"
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Impressora %s\n"
-"Quines modificacions voleu fer en aquesta impressora?"
+"Si us plau, escolliu el primer n鷐ero del rang 10 que voleu editar,\n"
+"o premeu Retorn per continuar.\n"
+"Qu trieu? "
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Modifica la configuraci de la impressora"
+msgid "Save theme"
+msgstr "Desa el tema"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Afegiu una impressora"
+msgid "group"
+msgstr "grup"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Mode normal"
+msgid "Brazil"
+msgstr "Brasil"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Change the printing system"
-msgstr "Modifica el sistema d'impressi"
+msgid "Auto Install"
+msgstr "Instal穕a autom鄑icament"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Configuraci de CUPS"
+msgid "Network Configuration Wizard"
+msgstr "Auxiliar de configuraci de xarxa"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Refresca la llista d'impressores (per veure totes les impressores CUPS "
-"remotes disponibles)"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-"Refresca la llista d'impressores (per veure totes les impressores CUPS "
-"remotes disponibles)"
+msgid "Removable media automounting"
+msgstr "Muntatge autom鄑ic dels dispositius extra颾les"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les impressores seg黣nts estan configurades. Feu doble clic en una "
-"impressora per modificar-ne els par鄊etres, per fer-la la impressora per "
-"defecte o per veure la informaci de la impressora."
+msgid "Printing"
+msgstr "Impressi"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Sistema d'impressi: "
+msgid "Unkown driver"
+msgstr "Controlador desconegut"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "S'est comprovant el programari instal穕at..."
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "S'est instal穕ant el Foomatic..."
+msgid "Create a new partition"
+msgstr "Crea una nova partici"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Driver:"
+msgstr "Controlador:"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "S'est configurant la impressora \"%s\"..."
+msgid "unknown"
+msgstr "Model desconegut"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "S'est configurant la impressora \"%s\"..."
+msgid "Use fdisk"
+msgstr "Utilitza l'fdisk"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "S'estan llegint dades de la impressora..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "MOVEU LA RODA!"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressi (cua) voleu utilitzar?"
+msgid "sent: "
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la cua d'impressi"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Impressora predeterminada"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "S'estan instal穕ant els paquets..."
+msgid "Automatic IP"
+msgstr "IP autom鄑ica"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "S'est esborrant %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"The \"%s\" button shows two more buttons to:\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema d'impressi (%s) no s'arrencar autom鄑icament quan l'ordinador "
-"s'inici.\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
"\n"
-"蓅 possible que l'arrencada autom鄑ica fos deshabilitada en canviar a un "
-"nivell de seguretat m閟 alt, perqu el sistema d'impressi 閟 un punt d'atac "
-"potencial.\n"
+" Note that two different options are available after clicking the button:\n"
"\n"
-"Voleu tornar a habilitar l'arrencada autom鄑ica del sistema d'impressi?"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "S'est iniciant el sistema d'impressi en arrencar l'ordinador"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Ara s'instal穕ar el sistema d'impressi %s en un sistema que s'executa en "
-"el nivell de seguretat %s.\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
"\n"
-"Aquest sistema d'impressi executa un dimoni (proc閟 en segon pla) que "
-"espera els treballs d'impressi i els gestiona. Aquest dimoni 閟 accessible "
-"per ordinadors remots connectats a la xarxa i, per tant, 閟 un possible punt "
-"d'atac. Per tant, nom閟 s'arrenquen per defecte uns pocs dimonis triats en "
-"aquest nivell de seguretat.\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
"\n"
-"Realment voleu configurar la impressi en aquest ordinador?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"S'est instal穕ant un sistema d'impressi amb el nivell de seguretat %s"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "paranoic"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "alt"
+"Ja ho teniu. S'ha completat la instal穕aci i el vostre sistema GNU/Linux "
+"est郳n"
+"preparat per fer-lo servir. Simplement premeu \"D'acord\" per reiniciar el "
+"sistema.\n"
+"Podeu iniciar GNU/Linux o Windows, el que volgueu (si teniu doble "
+"arrencada), aix韁n"
+"que l'ordinador s'hagi reiniciat.\n"
+"\n"
+"El bot \"Avan鏰t\" (nom閟 en mode expert) mostra dos botons m閟:\n"
+"\n"
+" * \"Genera un disquet d'instal穕aci autom鄑ica\": per crear un disquet \n"
+"d'instal穕aci que permetr fer una instal穕aci completa sense l'ajuda "
+"d'un\n"
+"operador, semblant a la instal穕aci que acabeu de configurar.\n"
+"\n"
+" Cal remarcar que es poden triar dues opcions diferents:\n"
+"\n"
+" * \"Repetici骪". Aquesta 閟 una instal穕aci parcialment automatitzada "
+"ja que\n"
+"el pas de particionar (i nom閟 aquest) es mant interactiu;\n"
+"\n"
+" * \"Automatitzada\". Instal穕aci completament automatitzada: el disc "
+"dur es\n"
+"reescriu completament i totes les dades es perden.\n"
+"\n"
+" Aquesta caracter韘tica 閟 for鏰 鷗il quan es fan instal穕acions a un bon "
+"grapat\n"
+"d'ordinadors similars. Mireu la secci d'instal穕aci autom鄑ica en la "
+"nostra web.\n"
+"\n"
+" * \"Desa la selecci de paquets\"(*): desa la selecci de paquets tal com\n"
+"s'han seleccionat abans en aquesta instal穕aci. Aleshores, quan feu una "
+"altra\n"
+"instal穕aci, inseriu el disquet a la unitat lectora i executeu la "
+"instal穕aci.\n"
+"Aneu a la pantalla d'ajuda prement la tecla F1, i teclegeu 'linux defcfg="
+"\"floppy\"'.\n"
+"\n"
+"(*) Necessiteu un disquet formatat en FAT (per crear-ne un sota GNU/Linux, "
+"escriviu\n"
+"\"mformat a:\")"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "S'est reiniciant el sistema d'impressi..."
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#
#: ../../printer/printerdrake.pm:1
@@ -11183,1150 +10865,1251 @@ msgstr "S'est reiniciant el sistema d'impressi..."
msgid "Configuration of a remote printer"
msgstr "Configuraci d'una impressora remota"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Moldova"
+msgstr "Mold鄓ia"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check if you want to erase your tape before the backup."
msgstr ""
-"L'acc閟 a la xarxa no ha funcionat i no s'ha pogut iniciar. Comproveu la "
-"configuraci i el maquinari. Despr閟 proveu de configurar la impressora "
-"remota una altra vegada."
+"Marqueu aquesta opci si voleu esborrar la cinta abans de fer la c騪ia de "
+"seguretat."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-"La configuraci de xarxa feta durant la instal穕aci no s'ha pogut iniciar "
-"ara. Comproveu si la xarxa es torna accessible despr閟 de reiniciar el "
-"sistema i corregiu la configuraci utilitzant el Centre de Control Mandrake, "
-"a la secci \"Xarxa & Internet\"/\"Connexi骪", i despr閟 configureu la "
-"impressora, tamb usant el Centre de Control Mandrake, secci \"Maquinari\"/"
-"\"Impressores\""
+"Una plataforma en l韓ia per respondre a les necessitats de suport especials "
+"de les empreses"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Configureu la xarxa ara"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "L'URL ha de comen鏰r amb 'ftp:' o 'http:'"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Continua sense configurar la xarxa"
+msgid "Add a new rule at the end"
+msgstr "Afegeix una regla nova al final"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Esteu a punt de configurar una impressora remota. Aix necessita una "
-"connexi de xarxa operativa, per la vostra xarxa encara no est "
-"configurada. Si continueu sense configurar la xarxa, no podreu utilitzar la "
-"impressora que esteu configurant ara. Qu voleu fer?"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "La funcionalitat de xarxa no ha estat configurada"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Ara podeu proporcionar les opcions per al m騞ul %s.\n"
+"Les opcions estan en el format \"nom=valor nom2=valor2 ...\".\n"
+"Per exemple, \"io=0x300 irq=7\""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "S'est arrencant la xarxa..."
+msgid "Quit without writing the partition table?"
+msgstr "Voleu sortir sense escriure la taula de particions?"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "S'estan refrescant les dades de les impressores..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Heu tranferit la vostra impressora predeterminada anterior (\"%s\"). Voleu "
-"que tamb sigui la impressora predeterminada en el nou sistema d'impressi %"
-"s?"
+msgid "Installing packages..."
+msgstr "S'estan instal穕ant els paquets..."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Configuraci de la transfer鑞cia de la impressi"
+msgid "Dutch"
+msgstr "Holand鑣"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "Ara s'instal穕aran els paquets seg黣nts"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "S'est transferint %s..."
+msgid "Angola"
+msgstr "Angola"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New printer name"
-msgstr "Nou nom d'impressora"
+msgid "service setting"
+msgstr "par鄊etre de servei"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "Custom"
+msgstr "Personalitzada"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
-"La impressora \"%s\" ja existeix,\n"
-"realment voleu sobreescriure la seva configuraci?"
+"Un altre loopback ja est utilitzant el fitxer, escolliu-ne un de diferent"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora nom閟 pot constar de lletres, n鷐eros i el car郼ter "
-"de subratllat"
+msgid "Read-only"
+msgstr "Nom閟 lectura"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Transfereix"
+msgid "Latvia"
+msgstr "Let騨ia"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ja existeix una impressora amb nom \"%s\" en %s. \n"
-"Feu clic a \"Transfereix\" per sobreescriure-la.\n"
-"Tamb podeu escriure un nom nou o ometre aquesta impressora."
+msgid "No known driver"
+msgstr "No hi ha cap controlador conegut"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "No transfereixis cap impressora"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"\n"
-"Marqueu les impressores que voleu transferir i feu clic a \n"
-"\"Transfereix\"."
+"S'ha detectat autom鄑icament la seg黣nt impressora, si no 閟 la que voleu "
+"configurar, escriviu un nom de dispositiu/nom de fitxer en la l韓ia d'entrada"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"No s'ha detectat cap targeta de so en el vostre ordinador. Si us plau, "
+"verifiqueu que teniu correctament inserida una targeta de so compatible amb "
+"Linux.\n"
"\n"
-"Tampoc poden transferir-se les impressores configurades amb els fitxers PPD "
-"proporcionats pels seus fabricants o amb controladors nadius per a CUPS."
+"\n"
+"Podeu visitar la nostra base de dades de maquinari a:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"A m閟, les cues que no han estat creades amb aquest programa o amb "
-"\"foomatic-configure\" no es poden transferir."
+msgid "Configure Local Area Network..."
+msgstr "Configura la xarxa d'鄏ea local..."
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng no funcionen amb impressores IPP.\n"
+msgid "Launch the sound system on your machine"
+msgstr "Executa el sistema de so en el vostre ordinador"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ nom閟 funciona amb impressores locals, impressores LPD remotes, i "
-"impressores de Socket/TCP.\n"
+msgid "Preparing printer database..."
+msgstr "S'est preparant la base de dades d'impressores..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no permet l'鷖 d'impressores en servidors Novell ni que les impressores "
-"envi飊 les dades dins d'una ordre formada arbitr鄏iament.\n"
+msgid "Information"
+msgstr "Informaci"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Podeu copiar la configuraci d'impressi que he fet per la cua %s a la %s, "
-"la cua d'impressi actual. Totes les dades de configuraci (nom "
-"d'impressora, descripci, ubicaci, tipus de connexi i par鄊etres per "
-"defecte) se sobreescriuran, per els treballs d'impressi no seran "
-"transferits.\n"
-"No totes les cues d'impressi poden ser transferides degut a les raons "
-"seg黣nts:\n"
+msgid "No network card"
+msgstr "No s'ha trobat cap targeta de xarxa"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"La impressora ha estat configurada autom鄑icament per permetre-us l'acc閟 "
-"als dispositius de targetes de fotos del vostre PC. Ara podeu accedir a les "
-"targetes de fotos emprant l'eina gr鄁ica \"MtoolsFM\" (men \"Aplicacions\" -"
-"> \"Eines d'arxivament\" -> \"Gestor de fitxers MTools\") o les utilitats de "
-"la l韓ia d'ordres \"mtools\" (introdu飖 \"man mtools\" a la l韓ia d'ordres "
-"per a m閟 informaci). Trobareu el sistema de fitxers de la targeta sota la "
-"lletra d'unitat \"p:\", o a les lletres seg黣nts si teniu m閟 d'una "
-"impressora HP amb unitats de targetes de fotos. Al \"MToolsFM\" podeu "
-"explorar les diferents lletres d'unitat amb el camp que es troba a la "
-"cantonada superior dreta de les llistes de fitxers."
+msgid "Which filesystem do you want?"
+msgstr "Quin sistema de fitxers voleu?"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 botons"
+
+#
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "Informaci detallada"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"Printer default settings\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"El vostre dispositiu multifunci ha estat configurat autom鄑icament per "
-"poder escanejar. Ara podeu escanejar amb \"scanimage\" (\"scanimage -d hp:%s"
-"\" per especificar l'esc鄋er si n'hi ha m閟 d'un) des de la l韓ia d'ordres o "
-"amb les interf韈ies gr鄁iques \"xscanimage\" o \"xsane\". Si esteu "
-"utilitzant el GIMP, tamb podeu escanejar escollint el punt apropiat en el "
-"men \"Fitxer\"/\"Adquireix\". Executeu \"man scanimage\" a la l韓ia "
-"d'ordres per a m閟 informaci.\n"
+"Par鄊etres predeterminats de la impressora\n"
"\n"
-"No utilitzeu \"scannerdrake\" amb aquest dispositiu!"
+"Us haur韊u d'assegurar que la mida de p鄃ina, el tipus de tinta i el mode "
+"d'impressi (si estan disponibles) i tamb la configuraci del maquinari de "
+"les impressores l鄐er (mem騬ia, unitat d鷓lex, safates extra) s髇 correctes. "
+"Cal remarcar que amb una qualitat d'impressi o una resoluci molt altes la "
+"impressi pot ser molt lenta."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) p鄃ina(es) de prova..."
+msgid "This floppy is not FAT formatted"
+msgstr "Aquest disquet no est formatat amb FAT"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Imprimeix la llista d'opcions"
+msgid "Configuring network"
+msgstr "S'est configurant la xarxa"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'est imprimint en la impressora \"%s\""
+msgid "Graphic Card"
+msgstr "Targeta gr鄁ica"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "S'est imprimint o llegint una targeta de fotos en \"%s\""
+msgid "Resizing Windows partition"
+msgstr "S'est redimensionant la partici de Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "S'est imprimint/escanejant en \"%s\""
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 del prove飀or (opcional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "S'est imprimint/escanejant/llegint targetes de fotos en \"%s\""
+msgid "Cameroon"
+msgstr "Camerun"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Per con鑙xer les opcions disponibles per a la impressora actual, llegiu la "
-"llista de sota o feu clic al bot \"Imprimeix la llista d'opcions\".%s%s\n"
-"\n"
+"Ara podeu fer les particions a %s.\n"
+"Quan acabeu, no oblideu desar-les utiltzant 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les ordres \"%s\" i \"%s\" tamb permeten modificar els par鄊etres per a un "
-"treball d'impressi concret. Simplement afegiu els par鄊etres que vulgueu a "
-"la l韓ia d'ordres, p.ex. \"%s <fitxer>\".\n"
+msgid "Close"
+msgstr "Tanca"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Tamb podeu emprar la interf韈ie gr鄁ica \"xpdq\" per configurar opcions i "
-"gestionar treballs d'impressi.\n"
-"Si esteu utilitzant KDE com a entorn gr鄁ic per defecte, teniu un \"bot "
-"d'emerg鑞cia\", una icona a l'escriptori, etiquetada amb \"ATURA la "
-"impressora!\", que atura tots el treballs d'impressi immediatament en fer-"
-"hi clic. Aix 閟 鷗il, per exemple, quan se us enganxa el paper en la "
-"impressora.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Calendari"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"Tamb podeu utilitzar aquesta ordre en el camp \"Ordre d'impressi骪" dels "
-"di鄉egs d'impressi de moltes aplicacions. Per ara no heu de subministrar "
-"el fitxer perqu el fitxer per imprimir ja el proporciona l'aplicaci.\n"
+"Restaura l'entrada\n"
+"del cat鄉eg seleccionada"
+#
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Per imprimir un fitxer des de la l韓ia d'ordres (finestra de terminal) "
-"utilitzeu l'ordre \"%s <fitxer>\" o \"%s <fitxer>\".\n"
+"Per poder utilitzar una impressora lpd remota, cal que proporcioneu el nom "
+"de l'ordinador central que t el servidor de la impressora i el nom de la "
+"impressora en aquell servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "Iceland"
+msgstr "Isl鄋dia"
+
+#: ../../common.pm:1
+#, c-format
+msgid "consolehelper missing"
+msgstr "El consolehelper no hi 閟"
+
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr "aturat"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"Per veure una llista de les opcions disponibles per a la impressora actual "
-"feu clic sobre el bot \"Imprimeix la llista d'opcions\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Expandeix l'arbre"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
+"L'antic controlador \"%s\" ha estat desaprovat.\n"
"\n"
-"L'ordre \"%s\" tamb us permet modificar els par鄊etres per a un treball "
-"d'impressi concret. Simplement afegiu els par鄊etres desitjats a la l韓ia "
-"d'ordres, p.ex.: \"%s <fitxer>\". "
+"S'ha vist que causa problemes al nucli en descarregar-se.\n"
+"\n"
+"El nou controlador \"%s\" nom閟 s'usar en la seg黣nt arrencada."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Per imprimir un fitxer des de la l韓ia d'ordres (finestra de terminal) useu "
-"l'ordre \"%s <fitxer>\".\n"
+msgid "Expert Mode"
+msgstr "Mode expert"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printer options"
+msgstr "Opcions de la impressora"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Local Network adress"
+msgstr "Adre鏰 de la xarxa local"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Fes una c騪ia de seguretat dels fitxers del sistema (directori /etc)."
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Aqu teniu una llista de les opcions d'impressi disponibles per a la "
-"impressora actual:\n"
+"Ara teniu l'oportunitat de baixar paquets actualitzats. Aquests paquets\n"
+"han estat publicats despr閟 del llan鏰ment de la distribuci. Poden "
+"contenir\n"
+"actualitzacions de seguretat o correccions d'errors.\n"
"\n"
+"Per baixar aquests paquets, necessitareu tenir una connexi a Internet\n"
+"operativa.\n"
+"\n"
+"Voleu instal穕ar aquestes actualitzacions?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Podeu utilitzar aquestes ordres en el camp \"Ordre d'impressi骪" dels "
-"di鄉egs d'impressi de moltes aplicacions, per ara no heu de subministrar "
-"el fitxer perqu el fitxer per imprimir ja el proporciona l'aplicaci.\n"
+msgid "Samba Server"
+msgstr "Servidor Samba"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-"Per imprimir un fitxer des de la l韓ia d'ordres (finestra de terminal) podeu "
-"utilitzar la comanda \"%s <fitxer>\" o una eina d'impressi gr鄁ica: \"xpp "
-"<fitxer>\" o \"kprinter <fitxer>\". Les eines gr鄁iques us permeten escollir "
-"la impressora i modificar-ne els par鄊etres f郼ilment.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Ha funcionat correctament?"
+msgid "Australian Optus cable TV"
+msgstr "TV per cable australiana Optus"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"La(es) p鄃ina(es) de prova s'ha(n) enviat a la impressora.\n"
-"Pot passar un cert temps abans no comenci la impressi.\n"
+" <Tab>/<Alt-Tab> entre elements | <Espai> selecciona | <F12> pant. seg黣nt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+msgid "Subnet:"
msgstr ""
-"La(es) p鄃ina(es) de prova s'ha(n) enviat a la impressora.\n"
-"Pot passar un cert temps abans no comenci la impressi.\n"
-"Estat de la impressi:\n"
-"%s\n"
-"\n"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "No imprimeixis cap p鄃ina de prova"
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo test page"
-msgstr "P鄃ina de prova de fotografia"
+msgid "Please enter the host name or IP."
+msgstr "Si us plau, introdu飖 el nom de l'ordinador o la IP."
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "P鄃ina de prova alternativa (A4)"
+msgid "When"
+msgstr "Quan"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "P鄃ina de prova alternativa (Carta)"
+msgid "Second DNS Server (optional)"
+msgstr "Segon servidor DNS (opcional)"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "P鄃ina de prova est鄋dard"
+msgid "Finland"
+msgstr "Finl鄋dia"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Print"
-msgstr "Imprimeix"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Cap p鄃ina de prova"
+msgid "Color depth: %s\n"
+msgstr "Profunditat del color: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Escolliu les p鄃ines de prova que voleu imprimir.\n"
-"Nota: la p鄃ina de prova de fotografia pot ser molt lenta d'imprimir i en "
-"impressores l鄐er amb poca mem騬ia podria no acabar d'imprimir-se. "
-"Normalment n'hi ha prou d'imprimir la p鄃ina de prova est鄋dard."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "P鄃ines de prova"
+msgid "Loading from floppy"
+msgstr "S'est carregant des del disquet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Voleu definir la impressora (\"%s\")\n"
-"com a impressora predeterminada?"
+"El Drakperm s'usa per veure els fitxers que es faran servir per ajustar els "
+"permisos, propietaris i grups a trav閟 de l'msec.\n"
+"Tamb podeu editar les vostres pr騪ies regles, que sobreescriuran les regles "
+"predeterminades."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "L'opci %s est fora de rang!"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'opci %s ha de ser un n鷐ero!"
+msgid "Slovenia"
+msgstr "Eslov鑞ia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'opci %s ha de ser un n鷐ero enter!"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Introdu飖 un usuari\n"
+"%s"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Selecci del model d'impressora"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- Dispositius PCI i USB: es llisten els identificadors PCI/USB del venedor, "
+"del dispositiu, del subvenedor i del subdispositiu"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "ProgressBar color selection"
+msgstr "Selecci del color de la barra de progr閟"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"Par鄊etres predeterminats de la impressora\n"
-"\n"
-"Us haur韊u d'assegurar que la mida de p鄃ina, el tipus de tinta i el mode "
-"d'impressi (si estan disponibles) i tamb la configuraci del maquinari de "
-"les impressores l鄐er (mem騬ia, unitat d鷓lex, safates extra) s髇 correctes. "
-"Cal remarcar que amb una qualitat d'impressi o una resoluci molt altes la "
-"impressi pot ser molt lenta."
+"Aquestes s髇 les diferents entrades en el men d'arrencada.\n"
+"Podeu afegir-ne m閟 o canviar-ne les existents."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Per poder imprimir amb la Lexmark inkjet i amb aquesta configuraci, "
-"necessiteu els controladors de la impressora inkjet proporcionats per "
-"Lexmark (http://www.lexmark.com/). Dins de la web de Lexmark, feu clic al "
-"bot \"Controladors\" i trieu la secci d'impressores. Aleshores escolliu el "
-"vostre model i despr閟 \"Linux\" com a sistema operatiu. Els controladors "
-"v閚en en paquets RPM o en seqncies per a l'int鑢pret d'ordres amb una "
-"instal穕aci gr鄁ica interactiva. No necessiteu fer aquesta configuraci amb "
-"la interf韈ie gr鄁ica. Cancel穕eu directament despr閟 de l'acord de "
-"llic鑞cia. Llavors imprimiu p鄃ines d'alineaci dels cap鏰ls d'impressi amb "
-"l'ordre \"lexmarkmaintain\" i ajusteu l'alineaci dels cap鏰ls amb aquest "
-"programa."
+"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
+"especificar en executar 'at', i executa les ordres autom鄑iques quan la\n"
+"mitjana de c鄏rega 閟 prou baixa."
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Radio support:"
+msgstr "Permet l'鷖 de la r郿io:"
#
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "S'estan instal穕ant els paquets..."
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Configuraci de la Lexmark inkjet"
+msgid "boot disk creation"
+msgstr "creaci de discs d'arrencada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Els controladors per a la inkjet proporcionats per Lexmark nom閟 funcionen "
-"amb impressores locals, i no amb impressores en ordinadors remots o "
-"servidors d'impressi. Si us plau, connecteu la vostra impressora a un port "
-"local o configureu-la en l'ordinador on est connectada."
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Esteu configurant una \"winprinter\" l鄐er OKI. Aquestes impressores\n"
-"usen un protocol de comunicaci molt especial i nom閟 funcionen quan es "
-"connecten al primer port paral穕el. Si la impressora est connectada a un "
-"altre port o a un servidor d'impressi, connecteu-la al primer port "
-"paral穕el abans d'imprimir la p鄃ina de prova. Si no ho feu, la impressora "
-"no funcionar. El controlador de la impressora ignorar el tipus de connexi."
+msgid "SILO"
+msgstr "SILO"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Configuraci de la \"winprinter\" OKI"
+msgid "Change type"
+msgstr "Canvia el tipus"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si la vostra impressora no 閟 a la llista, escolliu-ne una de compatible "
-"(mireu el manual de la impressora) o una de similar."
+msgid "SILO Installation"
+msgstr "Instal穕aci del SILO"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Utilitzar CD/DVDROM per fer la c騪ia de seguretat"
+
+#: ../../install_messages.pm:1
+#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Felicitats! La instal穕aci ha acabat.\n"
+"Traieu el suport d'arrencada i premeu Retorn per tornar a arrencar.\n"
"\n"
"\n"
-"Si us plau, comproveu que Printerdrake ha detectat el model de la impressora "
-"correctament. Busqueu el model correcte a la llista quan el cursor estigui "
-"en un model erroni o en \"Impressora en cru (raw)\"."
+"Trobareu la soluci als problemes coneguts d'aquesta versi del\n"
+"Mandrake Linux a la fe d'errates que hi ha a \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"La informaci sobre com configurar el vostre sistema est disponible a\n"
+"l'鷏tim cap韙ol d'instal穕aci de la Guia Oficial de l'Usuari del\n"
+"Mandrake Linux."
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Quin 閟 el model de la vostra impressora?"
+msgid "paranoid"
+msgstr "paranoic"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer model selection"
-msgstr "Selecci del model d'impressora"
+msgid "Send mail report after each backup to:"
+msgstr "Envia un informe per correu electr騨ic despr閟 de cada c騪ia a:"
-#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "S'est llegint la base de dades d'impressores..."
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Tamb podeu utilitzar aquesta ordre en el camp \"Ordre d'impressi骪" dels "
+"di鄉egs d'impressi de moltes aplicacions. Per ara no heu de subministrar "
+"el fitxer perqu el fitxer per imprimir ja el proporciona l'aplicaci.\n"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Selecciona el model manualment"
+msgid "Resolution"
+msgstr "Resoluci"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "El model 閟 correcte"
+msgid ""
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
+"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
+"TCP/IP) i possiblement l'adre鏰 IP del servidor d'impressi, aix com el nom "
+"de compartici de la impressora a qu voleu accedir i el nom d'usuari,\n"
+"contrasenya i informaci de grup si s髇 necessaris."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
+"Arguments: (arg)\n"
"\n"
-"%s"
+" Accept/Refuse icmp echo."
msgstr ""
-"Printerdrake ha comparat el nom del model resultant de la detecci "
-"autom鄑ica d'impressores amb els models llistats en la seva base de dades "
-"d'impressores per trobar el millor resultat. L'elecci pot ser dolenta, "
-"especialment si la vostra impressora no es troba a la base de dades. Per "
-"tant, mireu si l'elecci 閟 correcta i feu clic a \"El model 閟 correcte\" "
-"si ho 閟, o a \"Selecciona el model manualment\" per tal d'escollir "
-"manualment el model d'impressora en la pantalla seg黣nt.\n"
-"\n"
-"Per la vostra impressora el Printerdrake ha trobat:\n"
-"\n"
-"%s"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Your printer model"
-msgstr "El model de la vostra impressora"
+msgid "reconfigure"
+msgstr "torna a configurar"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "S'est preparant la base de dades d'impressores..."
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+"La vostra targeta pot tenir acceleraci 3D de maquinari amb l'Xfree %s,\n"
+"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
+"PENJAR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Location"
-msgstr "Ubicaci"
+msgid "Xinetd Service"
+msgstr "Servei Xinetd"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Description"
-msgstr "Descripci"
+msgid "access to network tools"
+msgstr "acc閟 a les eines de xarxa"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Name of printer"
-msgstr "Nom de la impressora"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Cada impressora necessita un nom (per exemple \"impressora\"). Els camps de "
-"Descripci i Ubicaci no s髇 necessaris. S髇 comentaris per als usuaris."
+"Mandrake Linux 9.1 us permet utilitzar el programari m閟 actual per "
+"reproduir fitxers d'鄒dio, editar i organitzar les vostres imatges i fotos, "
+"i reproduir v韉eos"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Here is a list of all auto-detected printers. "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"S'ha produ飔 un error en instal穕ar l'aboot. \n"
+"Voleu intentar igualment la instal穕aci encara que aix destrueixi la "
+"primera partici?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+msgstr ""
+"descripci de les opcions:\n"
+"\n"
+" En aquest pas, el Drakbackup us permet modificar:\n"
+"\n"
+" - El mode de compressi:\n"
+" \n"
+" Si seleccioneu compressi bzip2, comprimireu\n"
+" les dades millor que amb gzip (una millora entre 2-10 %).\n"
+" Aquesta opci no est activada per defecte perqu鑌n"
+" necessita molt m閟 temps (deu vegades m閟).\n"
+" \n"
+" - El mode d'actualitzaci:\n"
+"\n"
+" Aquesta opci us permet actualitzar una c騪ia de seguretat,\n"
+" per no 閟 gaire 鷗il perqu s'han de descomprimir les\n"
+" dades copiades abans de poder-les actualitzar.\n"
+" \n"
+" - El mode .backupignore:\n"
+"\n"
+" Igual que el cvs, el Drakbackup ignorar totes les refer鑞cies\n"
+" incloses en els fitxers .backupignore de cada directori.\n"
+" P.ex.: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid ""
+"Restore Selected\n"
+"Files"
msgstr ""
+"Restaura els fitxers\n"
+"seleccionats"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
+"S'ha trobat %s, voleu suprimir-lo?\n"
+"Av韘: Si ja heu seguit aquest proc閟, probablement us calgui\n"
+"purgar l'entrada del par鄊etre 'authorized_keys' en el servidor."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ", dispositiu multifunci"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Si us plau, ompliu o marqueu el camp inferior"
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "S'estan instal穕ant els paquets..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Voleu desar les modificacions a /etc/fstab"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "S'estan instal穕ant els paquets..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "Protocol d'arrencada"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "S'estan instal穕ant els paquets..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "Discs LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "Cal instal穕ar el paquet %s. Voleu instal穕ar-lo?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "Heu d'entrar un URI v鄉id!"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "En arrencar"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Nom de domini"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bus identification"
+msgstr "Identificaci del bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
+msgid "Please make a backup of your data first"
+msgstr "Si us plau, feu primer una c騪ia de seguretat de les vostres dades"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Redirecciona el treball cap a una ordre"
+msgid "Vatican"
+msgstr "Let"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Model detectat: %s %s"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Teniu m閟 d'un disc dur; en quin voleu instal穕ar el Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Heu d'entrar un URI v鄉id!"
+msgid "Boot ISO"
+msgstr "ISO d'arrencada"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Remove List"
+msgstr "Esborra la llista"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid "A customizable environment"
msgstr ""
-"Podeu especificar directament l'URI per accedir a la impressora. L'URI ha de "
-"complir les especificacions CUPS o Foomatic. Cal remarcar que alguns gestors "
-"de cues no accepten tots els tipus d'URI."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Nom o IP de l'ordinador central de la impressora"
+msgid "Morocco"
+msgstr "Marroc"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "El n鷐ero de port ha de ser enter!"
+msgid "Which printer model do you have?"
+msgstr "Quin 閟 el model de la vostra impressora?"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Falta el nom o la IP de l'ordinador central de la impressora!"
+msgid "Add a new printer"
+msgstr "Afegiu una impressora"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Per imprimir a una impressora TCP o Socket, heu d'indicar el nom de xarxa o "
-"la IP de la impressora i, opcionalment, el n鷐ero de port. En els servidors "
-"HP JetDirect el n鷐ero del port normalment 閟 el 9100, en els altres pot "
-"variar. Mireu el manual del vostre maquinari."
+msgid " All of your selected data have been "
+msgstr " Totes les dades seleccionades han estat "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Trieu una de les impressores detectades de la llista, o introdu飖 el nom de "
-"l'ordinador central o la IP i opcionalment el n鷐ero de port (per defecte 閟 "
-"el 9100) en els quadres de text."
+msgid "<-- Delete"
+msgstr "<-- Suprimeix"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opcions de la impressora per a TCP/Socket"
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Ordinador central \"%s\", port %s"
+msgid "cpu # "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", ordinador central \"%s\", port %s"
+msgid "chunk size"
+msgstr "mida del fragment"
-#
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "S'est escanejant la xarxa..."
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "ordres abans de l'arrencada, o 'c' per obtenir una linia d'ordres."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Detecci autom鄑ica d'impressores"
+msgid "Problems installing package %s"
+msgstr "Hi ha hagut problemes en instal穕ar el paquet %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Falta el nom de la cua NCP!"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Rebreu un av韘 si la c鄏rega 閟 m閟 gran que aquest valor"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Falta el nom del Servidor NCP!"
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
+msgstr ""
+"\n"
+"\n"
+"Per trametre un informe d'error de programaci, feu clic al bot 'Informa'.\n"
+"S'obrir una finestra del navegador web amb la p鄃ina https://drakbug."
+"mandrakesoft.com\n"
+"on trobareu un formulari per omplir. La informaci que es mostra m閟 amunt "
+"s'enviar al servidor.\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add a scanner manually"
+msgstr "Seleccioneu l'usuari manualment"
+
+#
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressi"
+msgid "Reload partition table"
+msgstr "Torna a carregar la taula de particions"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "S, vull l'entrada autom鄑ica amb aquest (usuari, escriptori)"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressi NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP del seu ordinador central), aix com el nom de la cua d'impressi de\n"
-"la impressora a la qual voleu accedir i el nom d'usuari i contrasenya si "
-"s髇\n"
-"necessaris."
+msgid "Search for fonts in installed list"
+msgstr "Cerca les fonts en la llista de les instal穕ades"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "La xarxa local no finalitza amb '.0', ho deixem c髍rer."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Boot"
+msgstr "Arrel"
+
+#
+#: ../../harddrake/v4l.pm:1
#, c-format
+msgid "Tuner type:"
+msgstr "Tipus de sintonitzador:"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Connecteu la impressora a un servidor Linux i feu que els ordinadors Windows "
-"s'hi connectin com clients.\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
"\n"
-"Realment voleu continuar configurant aquesta impressora tal com s'est fent "
-"ara?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-"Configureu el vostre servidor Windows per tal que la impressora estigui "
-"disponible sota el protocol IPP i configureu la impressi en aquest "
-"ordinador amb el tipus de connexi \"%s\" en el Printerdrake.\n"
+"Aqu se seleccionar el sistema d'impressi per al vostre ordinador. Altres\n"
+"sistemes operatius us n'oferiran un, per el Mandrake Linux n'ofereix dos.\n"
"\n"
+" * \"pdq\" que vol dir \"print, don't queue\" (imprimeix, no facis cua), 閟\n"
+"l'opci escollida si teniu una connexi directa amb la impressora i voleu\n"
+"evitar aquelles cues d'impressi interminables, i no teniu impressores de \n"
+"xarxa. Nom閟 funcionar sobre xarxes molt senzilles i 閟 bastant lent per a\n"
+"xarxes en general. Escolliu \"pdq\" si 閟 la vostra primera incursi en GNU/"
+"Linux.\n"
+"Podeu canviar la vostra elecci despr閟 de la instal穕aci executant el \n"
+"PrinterDrake des del Centre de Control Mandrake, fent clic al bot \"Expert"
+"\".\n"
+"\n"
+" * \"%s\" vol dir \"Common Unix Printing System\" (Sistema d'impressi com鶿n"
+"de Unix), 閟 el millor a l'hora d'imprimir a la vostra impressora local i a "
+"la\n"
+"meitat del planeta. 蓅 senzill i pot actuar com a servidor o client per a "
+"l'antic\n"
+"sistema d'impressi \"lpd\". Per tant, 閟 compatible amb els sistemes "
+"anteriors.\n"
+"Pot fer moltes coses, per la configuraci b鄐ica es tant senzilla com la de "
+"\"pdq\".\n"
+"Si necessiteu CUPS per emular un servidor \"lpd\", heu d'habilitar el "
+"dimoni\n"
+"\"cups-lpd\". T una interf韈ie gr鄁ica per imprimir i escollir les "
+"opcions \n"
+"d'impressi."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "\"Menu\" key"
+msgstr "tecla de \"Men鶿""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Ara es configurar la impressi cap a un usuari de Windows amb contrasenya. "
-"Degut a una fallada en l'arquitectura del programari del client Samba la "
-"contrasenya es mostra en text clar en la l韓ia d'ordres que el client Samba "
-"utilitza per transmetre i imprimir un treball en el Servidor Windows. Per "
-"tant, 閟 possible per qualsevol usuari d'aquell ordinador de veure la "
-"contrasenya en la pantalla simplement escrivint ordres tals com \"ps auxwww"
-"\".\n"
-"\n"
-"Us recomanem que utilitzeu alguna de les seg黣nts alternatives (en tots el "
-"casos heu d'estar segur que nom閟 els ordinadors de la vostra xarxa local "
-"tenen acc閟 al vostre Servidor Windows, per exemple utilitzant un "
-"tallafoc):\n"
-"\n"
-"Utilitzeu un compte sense contrasenya en el Servidor Windows, tal com \"GUEST"
-"\" o un compte especial dedicat a la impressi. No tragueu la protecci de "
-"la contrasenya d'un compte personal o del compte de l'administrador.\n"
"\n"
-"Configureu el vostre Servidor Windows fent que la impressora estigui "
-"disponible a trav閟 del protocol LPD. Aleshores, definiu en el Printerdrake "
-"la impressi en aquest ordinador amb el tipus de connexi \"%s\".\n"
"\n"
+"Si us plau, comproveu que Printerdrake ha detectat el model de la impressora "
+"correctament. Busqueu el model correcte a la llista quan el cursor estigui "
+"en un model erroni o en \"Impressora en cru (raw)\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "AV蚐 DE SEGURETAT!"
+msgid "Security Administrator:"
+msgstr "Administrador de seguretat:"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Falta el nom de compartici de Samba!"
+msgid "Please enter your login"
+msgstr "Si us plau, introdu飖 la vostra identificaci (login)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Cal que subministreu o b el nom del servidor o b la seva IP!"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Auto-detected"
-msgstr "Detectada autom鄑icament"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
+msgstr ""
+"No teniu cap connexi a Internet.\n"
+"Creeu-ne una fent clic a 'Configura'"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Workgroup"
-msgstr "Grup de treball"
+msgid "Fonts copy"
+msgstr "C騪ia de fonts"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Share name"
-msgstr "Nom de compartici"
+msgid "Automated"
+msgstr "Autom鄑ica"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
+msgid "Do you want to test the configuration?"
+msgstr "Voleu comprovar la configuraci?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Ordinador central del servidor SMB"
+msgid ""
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr ""
+"La impressora \"%s\" ha estat suprimida d'Star Office/OpenOffice.org/GIMP "
+"amb 鑨it."
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Si la impressora desitjada ha estat detectada autom鄑icament, nom閟 cal que "
-"la seleccioneu a la llista i que hi afegiu el nom d'usuari, la contrasenya i "
-"el grup de treball, si s髇 necessaris."
+"Est鄋dard: Aquesta 閟 la seguretat est鄋dard recomanada per a un ordinador "
+"que es connectar a Internet com a client.\n"
+"\n"
+"Alta: Hi ha algunes restriccions, i cada nit s'executen m閟 tests que "
+"al nivell est鄋dard.\n"
+"\n"
+"M閟 alta: La seguretat 閟 prou elevada perqu el sistema funcioni com a "
+"servidor que pugui acceptar connexions de diversos clients. Si aquesta "
+"m鄎uina nom閟 ser un client a Internet, haur韊u de triar un nivell m閟 "
+"baix.\n"
+"\n"
+"Paranoic: Similar al nivell anterior, per el sistema es tanca completament "
+"i les caracter韘tiques de seguretat estan al m鄕im\n"
+"\n"
+"Administrador de seguretat:\n"
+" Si les \"Alarmes de seguretat\" estan activades, s'enviaran a "
+"aquest usuari (nom d'usuari o adre鏰 electr騨ica)"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save packages selection"
+msgstr "Desa la selecci de paquets"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adre鏰 IP del servidor d'impressi, aix com el nom "
-"de compartici de la impressora a qu voleu accedir i el nom d'usuari,\n"
-"contrasenya i informaci de grup si s髇 necessaris."
+msgid "Remove the last item"
+msgstr "Esborra l'鷏tim element"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Llista d'usuaris per restaurar (nom閟 閟 important la data m閟 recent per "
+"usuari)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Impressora \"%s\" en el servidor \"%s\""
+msgid "No net boot images created!"
+msgstr "No s'ha creat cap imatge d'arrencada des de xarxa"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", impressora \"%s\", en el servidor \"%s\""
+msgid "use pptp"
+msgstr "utilitza pptp"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Falta el nom de la impressora remota!"
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"Escolliu els serveis que s'han d'iniciar autom鄑icament durant l'arrencada"
#
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Falta el nom de l'ordinador central remot!"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Apreneu a utilitzar aquesta impressora"
#
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Nom de la impressora remota"
+msgid "Configure the network now"
+msgstr "Configureu la xarxa ara"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Nom de l'ordinador central remot"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Escolliu una r鑠lica des de la qual aconseguir els paquets"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Per poder utilitzar una impressora lpd remota, cal que proporcioneu el nom "
-"de l'ordinador central que t el servidor de la impressora i el nom de la "
-"impressora en aquell servidor."
+"El redimensionador de la FAT no pot gestionar la vostra partici. \n"
+"S'ha produ飔 l'error seg黣nt: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
+msgid "Which sector do you want to move it to?"
+msgstr "A quin sector ho voleu moure?"
+
+#
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Do you want to click on this button?"
+msgstr "Voleu fer clic en aquest bot?"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahamas"
+msgstr "Bahames"
#
#: ../../printer/printerdrake.pm:1
@@ -12334,96 +12117,127 @@ msgstr "Opcions de la impressora lpd remota"
msgid "Manual configuration"
msgstr "Configuraci manual"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Heu d'escollir/introduir una impressora/dispositiu!"
+msgid "search"
+msgstr "cerca"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-" (Ports Paral穕el: /dev/lp0, /dev/lp1, etc., equivalents a LPT1:, LPT2:, "
-"etc.; 1a impressora USB: /dev/usb/lp0, 2a impressora USB: /dev/usb/lp1, "
-"etc.)."
+"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
+"a /etc/sysconfig/keyboard. Es pot seleccionar mitjan鏰nt la utilitat\n"
+"kbdconfig.\n"
+"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instal穕aci del controlador de pantalla)"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la l韓ia d'entrada"
+"El syslog 閟 el sistema que utilitzen molts dimonis per registrar\n"
+"missatges en diversos fitxers de registre del sistema. 蓅 aconsellable\n"
+"executar-lo sempre."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
+msgid "Unknown/Others"
+msgstr "Desconegut|Gen鑢ic"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Aqu teniu una llista de les impressores que s'han detectat. Escolliu la "
-"impressora que voleu configurar. La configuraci de la impressora es far "
-"autom鄑icament. Si la vostra impressora no ha estat correctament detectada o "
-"si preferiu personalitzar la seva configuraci, habiliteu \"Configuraci "
-"manual\"."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "No TV Card detected!"
+msgstr "No s'ha detectat cap targeta de TV!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Opcions"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "La impressora \"%s\" 閟 ara la impressora per defecte."
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+"Esteu configurant una \"winprinter\" l鄐er OKI. Aquestes impressores\n"
+"usen un protocol de comunicaci molt especial i nom閟 funcionen quan es "
+"connecten al primer port paral穕el. Si la impressora est connectada a un "
+"altre port o a un servidor d'impressi, connecteu-la al primer port "
+"paral穕el abans d'imprimir la p鄃ina de prova. Si no ho feu, la impressora "
+"no funcionar. El controlador de la impressora ignorar el tipus de connexi."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
-"S'ha detectat la seg黣nt impressora. La configuraci de la impressora es "
-"far autom鄑icament. Si la vostra impressora no ha estat correctament "
-"detectada o si preferiu personalitzar la seva configuraci, habiliteu "
-"\"Configuraci manual\"."
+#
#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detected"
+msgstr "Detectada autom鄑icament"
+
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Les impressores seg黣nts\n"
+"Ara es configurar l'ordinador per tal que comparteixi la connexi a "
+"Internet.\n"
+"Amb aquesta caracter韘tica, altres ordinadors de la vostra xarxa local\n"
+"podran utilitzar la connexi a Internet d'aquest ordinador.\n"
"\n"
+"Assegureu-vos d'haver configurat l'acc閟 a Internet i a la xarxa local amb "
+"el drakconnect abans de continuar.\n"
+"Nota: per configurar una xarxa d'鄏ea local (LAN), us cal un adaptador de "
+"xarxa dedicat."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la l韓ia d'entrada"
+"No hi ha prou espai lliure per un 1MB de bootstrap! La instal穕aci "
+"continuar, per per iniciar el sistema necessitareu crear la partici de "
+"bootstrap amb el DiskDrake"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
@@ -12434,1903 +12248,1534 @@ msgstr ""
"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
"dispositiu/nom de fitxer en la l韓ia d'entrada"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Escolliu el port al qual est connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la l韓ia d'entrada"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Rebutja"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"S'ha detectat autom鄑icament la seg黣nt impressora, si no 閟 la que voleu "
-"configurar, escriviu un nom de dispositiu/nom de fitxer en la l韓ia d'entrada"
+"El HardDrake fa una prova del maquinari, i opcionalment configura\n"
+"el maquinari nou/canviat."
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Impressores disponibles"
+msgid "Remote Printers"
+msgstr "Impressores remotes"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "No s'ha trobat cap impressora!"
+msgid "Creating and formatting file %s"
+msgstr "S'est creant i formatant el fitxer %s"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Heu d'entrar un nom de dispositiu o de fitxer!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"No s'ha trobat cap impressora! Per instal穕ar-ne una manualment entreu el "
-"dispositiu/fitxer a la l韓ia d'entrada (Ports Paral穕el: /dev/lp0, /dev/lp1, "
-"etc., equivalents a LPT1:, LPT2:, etc.; 1a impresora USB: /dev/usb/lp0, 2a "
-"impressora USB: /dev/usb/lp1, etc.)."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Escolliu un LVM existent al qual afegir-ho"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printer"
-msgstr "Impressora local"
+msgid "xfs restart"
+msgstr "reinicialitzaci de l'xfs"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Impressora USB \\/*%s"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"La impressora \"%s\" ja existeix,\n"
+"realment voleu sobreescriure la seva configuraci?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Impressora en el port paral穕el \\/*%s"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "No hi ha particions disponibles"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impressora \"%s\" en servidor SMB/Windows \"%s\""
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Impressora de xarxa \"%s\", port %s"
+msgid "Unselected All"
+msgstr "Desselecciona-ho tot"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Detected %s"
-msgstr "S'ha detectat %s"
+msgid "Domain Name Resolver"
+msgstr "Sistema de resoluci de nom de domini"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", impressora \"%s\" en servidor SMB/Windows \"%s\""
+msgid "Encryption key (again)"
+msgstr "Clau de xifratge (un altre cop)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", impressora de xarxa \"%s\", port %s"
+msgid "Samba share name missing!"
+msgstr "Falta el nom de compartici de Samba!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Felicitats, la impressora s'ha instal穕at i configurat correctament!\n"
-"\n"
-"Podeu imprimir utilitzant l'ordre \"Imprimeix\" de les aplicacions "
-"(normalment en el men \"Fitxer\").\n"
-"\n"
-"Si voleu afegir, esborrar o canviar el nom a una impressora, o si voleu "
-"canviar les opcions per defecte (safata d'entrada, qualitat impressi...), "
-"seleccioneu \"Impressora\" en la secci \"Maquinari\" del Centre de Control "
-"Mandrake."
+msgid "True Type install done"
+msgstr "Instal穕aci de True Type feta"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Detecta autom鄑icament les impressores connectades a m鄎uines amb Microsoft "
-"Windows"
+msgid "Detection in progress"
+msgstr "Detecci en proc閟"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Detecta autom鄑icament les impressores connectades directament a la xarxa "
-"local"
+msgid "Build Whole Kernel -->"
+msgstr "Munta tot el nucli -->"
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Detecta autom鄑icament les impressores connectades a aquesta m鄎uina"
+msgid "Welcome to %s"
+msgstr "Benvingut a %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuraci de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudar a instal穕ar les impressores connectades a aquest "
-"ordinador.\n"
-"\n"
-"Si teniu impressores connectades a aquesta m鄎uina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar autom鄑icament.\n"
-"\n"
-"Feu clic a \"Seg黣nt\" quan estigueu preparat, o a \"Cancel穕a\" si no voleu "
-"configurar ara les impressores."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Inseriu el disquet d'Actualitzaci de M騞uls a la unitat %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
"\n"
-"Benvingut a l'auxiliar de configuraci de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudar a instal穕ar les impressores connectades a aquest "
-"ordinador o connectades directament a la xarxa local.\n"
-"\n"
-"Si teniu impressores connectades a aquesta m鄎uina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar autom鄑icament. Engegueu tamb les "
-"impressores de la xarxa local.\n"
-"\n"
-"Noteu que la detecci autom鄑ica d'impressores de la xarxa local triga m閟 "
-"que la detecci d'impressores connectades directament a la m鄎uina. Seria "
-"millor que desactiv閟siu la detecci autom鄑ica d'impressores en xarxa si no "
-"la necessiteu.\n"
-"\n"
-"Feu clic a \"Seg黣nt\" quan estigueu preparat, o a \"Cancel穕a\" si no voleu "
-"configurar ara les impressores."
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuraci de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudar a instal穕ar les impressores connectades "
-"directament a l'ordinador, o a la xarxa, o a una m鄎uina Windows remota.\n"
-"\n"
-"Si teniu impressores connectades a aquesta m鄎uina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar autom鄑icament. Engegueu tamb les "
-"impressores de xarxa i les m鄎uines Windows que tenen impressores "
-"connectades.\n"
-"\n"
-"Noteu que la detecci autom鄑ica d'impressores de la xarxa local triga m閟 "
-"que la detecci d'impressores connectades directament a la m鄎uina. Seria "
-"millor que desactiv閟siu la detecci autom鄑ica d'impressores en xarxa o en "
-"m鄎uina Windows si no la necessiteu.\n"
-"\n"
-"Feu clic a \"Seg黣nt\" quan estigueu preparat, o a \"Cancel穕a\" si no voleu "
-"configurar ara les impressores."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Compartici de fitxers"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Benvingut a l'auxiliar de configuraci de la impressora\n"
-"\n"
-"Aquest auxiliar us permetr instal穕ar impressores locals o remotes per usar-"
-"les en aquest ordinador i tamb des d'altres ordinadors de la xarxa.\n"
-"\n"
-"Us demanar la informaci necess鄏ia per definir impressores i us "
-"proporcionar acc閟 als controladors disponibles de les impressores, les "
-"seves opcions i els tipus de connexions d'impressores."
+"L'ordre \"%s\" tamb us permet modificar els par鄊etres per a un treball "
+"d'impressi concret. Simplement afegiu els par鄊etres desitjats a la l韓ia "
+"d'ordres, p.ex.: \"%s <fitxer>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"En alguns casos, el controlador de %s necessita informaci addicional\n"
+"per funcionar correctament, tot i que normalment funciona b sense ella.\n"
+"Voleu especificar opcions addicionals o deixar que el controlador\n"
+"cerqui al vostre ordinador la informaci que necessita? Aquesta recerca\n"
+"podria penjar l'ordinador, per aix no causaria cap dany."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
-msgstr ""
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "L'etiqueta del CD no 閟 correcta. L'etiqueta d'aquest disc 閟 %s."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Benvingut a la utilitat de compartici de la connexi a Internet!\n"
+"\n"
+"%s\n"
+"\n"
+"Feu clic a 'Configura' per executar l'auxiliar de configuraci."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "S'est configurant la impressora \"%s\"..."
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Impressores disponibles"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"NOTA: Segons el model de la impressora i el sistema d'impressi, "
-"s'instal穕aran fins a %d MB de programari addicional."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Esteu segur que voleu habilitar la impressi en aquesta m鄎uina?\n"
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Voleu habilitar la impressi a les impressores anteriors?\n"
+msgid " (multi-session)"
+msgstr " (multisessi)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Voleu habilitar la impressi a les impressores de la xarxa local?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Temps m鄕im d'arrencada del nucli"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Voleu habilitar la impressi a les impressores anteriors o a les impressores "
-"de la xarxa local?\n"
+"La vostra targeta pot tenir acceleraci 3D de maquinari, per nom閟 amb "
+"l'Xfree %s.\n"
+"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""
-" (Assegureu-vos que totes les impressores estan connectades i engegades.)\n"
+"L'auxiliar de particionament del DrakX ha trobat les solucions seg黣nts:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
+msgid "Hungarian"
+msgstr "Hongar鑣"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"\n"
-"Hi ha %d impressores desconegudes connectades directament a l'ordinador."
+"Seleccioneu el vostre prove飀or.\n"
+"Si no 閟 a la llista, seleccioneu \"No 閟 a la llista\""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Sincronitzaci autom鄑ica de la hora (usant NTP)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+#
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "Servidor LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr ""
-"\n"
-"i %d impressores desconegudes estan "
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"\n"
-"i una impressora desconeguda estan "
+"El suport PCMCIA serveix normalment per funcionar amb coses com ara "
+"l'ethernet\n"
+"i els m騞ems en port鄑ils. No s'iniciar tret que es configuri, de manera\n"
+"que no hi ha problema per instal穕ar-lo en ordinadors que no el necessiten."
#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Checking your system..."
-msgstr "S'est comprovant el vostre sistema..."
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Reinicia l'XFS"
+msgid "Choose your country"
+msgstr "Escolliu el vostre pa韘"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
+"\n"
+"- Fitxers de sistema:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
+msgid "Standalone Tools"
+msgstr "Eines aut騨omes"
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "El model 閟 correcte"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr "On"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Falta el nom del Servidor NCP!"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr "per que no coincideixin amb"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"Aqu podeu seleccionar un controlador alternatiu (tant OSS com ALSA) per ala "
+"targeta de so (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "S'estan configurant les targetes PCMCIA..."
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Impressora en servidor CUPS remot"
+#: ../../common.pm:1
+#, c-format
+msgid "kdesu missing"
+msgstr "El kdesu no hi 閟"
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Elimina la selecci"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr "Clau de xifratge"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "s'ha detectat %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Afegeix un usuari"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Illa Christmas"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
+"Ha fallat la instal穕aci del carregador de l'arrencada. S'ha produ飔 "
+"l'error seg黣nt:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "Canal EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Fes que aquesta sigui la impressora predeterminada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "partici %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoic"
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Impressores disponibles"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
+msgstr "<-- Suprimeix un usuari"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Location on the bus"
+msgstr "Ubicaci en el bus"
#
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Elimina la selecci"
+#, c-format
+msgid "No printer found!"
+msgstr "No s'ha trobat cap impressora!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "el nom del venedor del dispositiu"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Esborra tot el disc"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Predeterminat)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Configuraci autom鄑ica de CUPS"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Modifica el sistema d'impressi"
+msgid "Automatic reconfiguration"
+msgstr "Reconfiguraci autom鄑ica"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Fet"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "en servidor CUPS \"%s\""
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "Illes Turks i Caicos"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(en aquest ordinador)"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "permisos"
-#
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Configuraci de l'av韘"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Anterior"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Compartici de fitxers"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Configuraci de la compartici de la connexi a Internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Commuta entre pla i ordenat per grups"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Temes"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opcions: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Actualment utilitzeu %s com a gestor de l'arrencada\n"
+"Feu clic a 'Configura' per executar l'auxiliar de configuraci."
#
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
+#, c-format
+msgid "OKI winprinter configuration"
msgstr "Configuraci de la \"winprinter\" OKI"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Detecci autom鄑ica de la impressora (local, TCP/Socket i SMB)"
+msgid "Saint Helena"
+msgstr "Saint Helena"
#
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Nivell de seguretat:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Alguns passos no s'han completat.\n"
"\n"
-"Amb un servidor CUPS remot, aqu no us cal configurar cap\n"
-"impressora; les impressores es detectaran autom鄑icament."
+"Segur que voleu sortir ara?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Com est connectada la impressora?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexi de la impressora"
+msgid "Polish (qwertz layout)"
+msgstr "Polon鑣 (disposici qwertz)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinam"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Benvingut al %s, el selector de sistema operatiu!\n"
+"\n"
+"Trieu un sistema operatiu de la lista superior, o espereu\n"
+"%d segons per arrencar en el sistema operatiu predeterminat.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugu鑣"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Nom del fitxer de loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "L'adre鏰 del servidor DNS ha d'estar en format 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "s鑢ie"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Newzealand"
+msgstr "Nova Zelanda"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers arrel"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "CapsLock key"
+msgstr "Tecla de Fixaci de Maj鷖cules"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Instal穕a el carregador de l'arrencada"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Seleccioneu la mida de la mem騬ia de la vostra targeta gr鄁ica"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "LVM name?"
+msgstr "Nom LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "S'han suprimit alguns dispositius en la classe \"%s\" de maquinari:\n"
-#: ../../security/help.pm:1
+# #msgid "Found %s %s interfaces"
+# #msgstr "S'han trobat interf韈ies %2$s %1$s"
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "S'han trobat interf韈ies %s %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "Post Install"
+msgstr "Post-instal穕aci"
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "The internal domain name"
+msgstr "Nom intern de domini"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ de la targeta"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
+"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
+"d'arrencada"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO amb men de text"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Tot (sense tallafoc)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Heu d'especificar una imatge del nucli"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", dispositiu multifunci en USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Baixa"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
+"S'est contactant amb la r鑠lica per obtenir la llista dels paquets "
+"disponibles..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litu AZERTY (antic)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiler (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
+"coordenada y de la cantonada superior\n"
+"esquerra de la barra de progr閟"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "Instal穕aci del SILO"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent i les Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fitxer/_Obre"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "S'est creant el disquet d'instal穕aci autom鄑ica"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Demora per al firmware obert"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Hungary"
+msgstr "Hongria"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Total progess"
+msgstr "Progr閟 total"
-#: ../../security/help.pm:1
+#
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Configuraci de l'av韘"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "New Zealand"
+msgstr "Nova Zelanda"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
+"Hi ha ja algunes restriccions, i a la nit es fan m閟 comprovacions "
+"autom鄑iques."
-#: ../../security/help.pm:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "please choose the date to restore"
+msgstr "Si us plau, seleccioneu la data a restaurar"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "S'est canviant de ext2 a ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Antilles Holandeses"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Browse to new restore repository."
+msgstr "Navega per trobar un nou dip騭it de restauraci"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse icmp echo."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Benvingut a l'auxiliar de configuraci de la impressora\n"
+"\n"
+"Aquest auxiliar us permetr instal穕ar impressores locals o remotes per usar-"
+"les en aquest ordinador i tamb des d'altres ordinadors de la xarxa.\n"
+"\n"
+"Us demanar la informaci necess鄏ia per definir impressores i us "
+"proporcionar acc閟 als controladors disponibles de les impressores, les "
+"seves opcions i els tipus de connexions d'impressores."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
msgstr ""
+"\n"
+"i %d impressores desconegudes estan "
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrador de seguretat (login o email)"
-
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Una llibreria que defensa contra els atacs de 'buffer overflow' i de 'format "
-"string'."
+"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
+"pantalla seg黣nt."
-#
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "Empra libsafe per als servidors"
+msgid "GB"
+msgstr "GB"
-#
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Security level"
-msgstr "Nivell de seguretat"
+msgid "Please give a user name"
+msgstr "Si us plau, introdu飖 un nom d'usuari"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Escolliu el nivell de seguretat desitjat"
+msgid "Enable CD Boot?"
+msgstr "Voleu habilitar l'arrencada des de CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcions b鄐iques del DrakSec"
+msgid " enter `void' for void entry"
+msgstr " entreu 'void' per entrada buida"
-#
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Aquest 閟 similar al nivell anterior, per el sistema est completament "
-"tancat i les caracter韘tiques de seguretat estan al m鄕im."
+msgid "on Hard Drive"
+msgstr "en el disc dur"
-#
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Amb aquest nivell de seguretat, la utilitzaci d'aquest sistema com a "
-"servidor esdev possible.\n"
-"La seguretat 閟 ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. Nota: si la vostra m鄎uina 閟 nom閟 "
-"un client d'Internet, seria millor escollir un nivell m閟 baix."
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Connexi normal per m騞em"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Hi ha ja algunes restriccions, i a la nit es fan m閟 comprovacions "
-"autom鄑iques."
+"\n"
+"Felicitats, la impressora s'ha instal穕at i configurat correctament!\n"
+"\n"
+"Podeu imprimir utilitzant l'ordre \"Imprimeix\" de les aplicacions "
+"(normalment en el men \"Fitxer\").\n"
+"\n"
+"Si voleu afegir, esborrar o canviar el nom a una impressora, o si voleu "
+"canviar les opcions per defecte (safata d'entrada, qualitat impressi...), "
+"seleccioneu \"Impressora\" en la secci \"Maquinari\" del Centre de Control "
+"Mandrake."
-#
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Aquesta 閟 la seguretat est鄋dard recomanada per a un ordinador que "
-"s'utilitzar per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya est habilitada, per l'鷖 com a ordinador de xarxa "
-"segueix sense ser recomanable."
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Ara, podeu executar xawtv (sota X Window!) !\n"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt m閟 "
-"f郼il\n"
-"d'utilitzar, per tamb molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No cal contrasenya per accedir-hi."
+"No hi ha prou espai d'intercanvi per completar la instal穕aci; si us plau, "
+"afegiu-ne"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoic"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Port"
-#
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "M閟 Alt"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"El GNU/Linux gestiona el temps en GMT (Greenwich Mean Time) i el tradueix a\n"
+"temps local d'acord amb el fus horari seleccionat. De tota manera 閟 "
+"possible\n"
+"desactivar-ho desmarcant \"Rellotge del maquinari en GMT\" de manera que el\n"
+"rellotge de la m鄎uina 閟 el mateix que el rellotge del sistema. Aix 閟\n"
+"convenient quan la m鄎uina tamb t instal穕at un altre sistema operatiu "
+"com \n"
+"Windows.\n"
+"\n"
+"L'opci de \"Sincronitzaci autom鄑ica de l'hora\" regular autom鄑icament\n"
+"l'hora connectant-se a un servidor horari remot d'Internet. En la llista\n"
+"que es presenta, escolliu un servidor ubicat a prop vostre. Necessiteu una\n"
+"connexi a Internet operativa perqu aquesta caracter韘tica funcioni. El "
+"que\n"
+"far realment 閟 instal穕ar en la vostra m鄎uina un servidor horari, que "
+"poden\n"
+"usar opcionalment els altres ordinadors de la xarxa local."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Alt"
+msgid "Which is your timezone?"
+msgstr "En quina zona hor鄏ia us trobeu?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Poor"
-msgstr "Pobre"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Benvinguts, crackers"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "Ara, el sistema est connectat a Internet."
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Illes Ge騬gia del Sud i Sandwich del Sud"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-tecla de retroc閟"
+msgid "Japan (broadcast)"
+msgstr "Jap (difusi)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "Mozambique"
+msgstr "Mo鏰mbic"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Abans cal crear /etc/dhcpd.conf!"
+msgid "Icon"
+msgstr "Icona"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Alguna cosa ha anat malament! Teniu instal穕at l'mkisofs?"
+msgid "Please choose what you want to backup"
+msgstr "Si us plau, escolliu de qu voleu fer la c騪ia de seguretat"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "La imatge ISO per a Etherboot 閟 %s"
+msgid "256 colors (8 bits)"
+msgstr "256 colors (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "No s'ha trobat cap unitat de disquet!"
+msgid "Read-write"
+msgstr "Lectura-escriptura"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ja podeu extreure el disquet"
+msgid "Size: %s\n"
+msgstr "Mida: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "No s'ha pogut accedir al disquet!"
+msgid "Hostname: "
+msgstr "Nom de l'ordinador central: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Si us plau, inseriu un disquet:"
+msgid "Chunk size %s\n"
+msgstr "Mida del fragment %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Write Config"
-msgstr "Escriu la configuraci"
+msgid "Build the future of Linux!"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Local Printer"
+msgstr "Impressora local"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"La majoria d'aquests valors s'han obtingut\n"
-"del vostre sistema actual. Podeu modificar-los si cal."
-
-#
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Configuraci del servidor dhcpd"
+" Copyright (C) 2001 MandrakeSoft per DUPONT Sebastien <dupont_s\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "IP Range End:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "Servidor Samba"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Nom de domini"
+msgid "ADSL connection"
+msgstr "Connexi ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Cap configuraci, si us plau feu clic a 'Auxiliar' o a 'Avan鏰t'.\n"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Error!"
+msgstr "S'ha produ飔 un error!"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Subm鄐cara de xarxa"
+msgid "cable connection detected"
+msgstr "s'ha detectat la connexi per cable"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "Permission denied transferring %s to %s"
+msgstr "S'ha denegat el perm韘 per transferir %s a %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Informeu d'un error"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "Configuraci del dhcpd..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "<-- Suprimeix un client"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Suprimeix un client"
+msgid "Resize"
+msgstr "Canvia la mida"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Afegeix un client -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "Afegeix/Suprimeix clients"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "Client DHCP"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "No s'ha creat cap imatge d'arrencada des de xarxa"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tipus: "
+msgid "Please enter the device name to use for backup"
+msgstr ""
+"Si us plau, introdu飖 el nom del dispositiu a utilitzar per fer la c騪ia"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Suprimeix un usuari"
+msgid "Resolution: %s\n"
+msgstr "Resoluci: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Add User -->"
-msgstr "Afegeix un usuari -->"
+msgid "matching"
+msgstr "que coincideixin amb"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
+"No es pot accedir als m騞uls del nucli corresponents al vostre nucli (no "
+"s'ha trobat el fitxer %s). Aix generalment vol dir que el vostre disquet "
+"d'arrencada no est sincronitzat amb el suport d'instal穕aci (si us plau, "
+"creeu un nou disquet d'arrencada)"
-#
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Suprimeix tots els NBI"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Suprimeix"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Aix trigar uns minuts."
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Si us plau, seleccioneu el port correcte. Per exemple, el port \"COM1\" en\n"
+"Windows s'anomena \"ttyS0\" en GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Munta tots els nuclis -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "No heu seleccionat cap NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Ara s'eliminaran els paquets seg黣nts"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Munta un NIC senzill -->"
+msgid "Connect to the Internet"
+msgstr "Connecta't a Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "No heu seleccionat cap nucli!"
+msgid "Use existing partitions"
+msgstr "Utilitza les particions existents"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Munta tot el nucli -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadenc (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "ISO d'arrencada"
+msgid "Mouse device: %s\n"
+msgstr "Dispositiu del ratol: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disquet d'arrencada"
+msgid "Reselect correct fonts"
+msgstr "Torna a seleccionar les fonts correctes"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
+"descripci de les opcions:\n"
"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"Si us plau, aneu amb compte quan feu c騪ies de seguretat amb FTP, \n"
+"perqu nom閟 s'envien al servidor les c騪ies creades correctament.\n"
+"Per tant, ara necessiteu construir la c騪ia de seguretat en el vostre disc \n"
+"dur abans d'enviar-la al servidor.\n"
"\n"
-msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
-"\\@mandrakesoft.com>"
+"Finalment, se us demanar si voleu veure una interf韈ie gr鄁ica en "
+"arrencar.\n"
+"Noteu que aquesta pregunta se us far encara que no h鄃iu fet el test de la\n"
+"configuraci. 襜viament, respondreu \"No\" si l'ordinador ha de ser un\n"
+"servidor, o si no heu pogut completar la configuraci de la pantalla amb "
+"鑨it."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Afegeix/Suprimeix clients"
+msgid "We are now going to configure the %s connection."
+msgstr "Ara es configurar la connexi %s."
-#: ../../standalone/drakTermServ:1
+#
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Afegeix/Suprimeix usuaris"
+msgid "MandrakeExpert Corporate"
+msgstr "Grup corporatiu MandrakeExpert"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Imatges d'arrencada de la xarxa"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Detecci autom鄑ica d'impressores"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "no s'ha trobat cap font.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disquet/ISO per a Etherboot"
+msgid "Language"
+msgstr "Escolliu el vostre idioma"
-#: ../../standalone/drakTermServ:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Atura el servidor"
+msgid "Printer model selection"
+msgstr "Selecci del model d'impressora"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Inicia el servidor"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Despr閟 de canviar el tipus de la partici %s, se'n perdran totes les dades"
-#
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Inhabilita el servidor"
+msgid "%d seconds"
+msgstr "%d segons"
-#
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Enable Server"
-msgstr "Habilita el servidor"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Inseriu un disquet en blanc a la unitat %s"
-#
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Configuraci del Servidor de Terminal de Mandrake"
+msgid "A valid URI must be entered!"
+msgstr "Heu d'entrar un URI v鄉id!"
-#
-#: ../../standalone/drakautoinst:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Esborra l'鷏tim element"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "S'ha trobat la interf韈ie \"%s\". Voleu utilitzar-la?"
-#
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Add an item"
-msgstr "Afegeix un element"
+msgid "Re-configure interface and DHCP server"
+msgstr "Torna a configurar la interf韈ie i el servidor DHCP"
#
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Instal穕a autom鄑icament"
+msgid "Sound configuration"
+msgstr "Configuraci de so"
-#: ../../standalone/drakautoinst:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquet s'ha creat correctament.\n"
-"Ara podeu repetir la vostra instal穕aci."
+msgid "Photo test page"
+msgstr "P鄃ina de prova de fotografia"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Felicitats!"
+msgid "Custom disk partitioning"
+msgstr "Particionament personalitzat de disc"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Enter Printer Name and Comments"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
"\n"
-"Benvingut.\n"
-"\n"
-"Els par鄊etres de la instal穕aci autom鄑ica estan disponibles en les "
-"seccions de l'esquerra"
+"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: %s"
+msgstr "Tipus: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "S'est creant el disquet d'instal穕aci autom鄑ica"
+msgid "Slovakian (QWERTY)"
+msgstr "Eslovac (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "No Sound Card detected!"
+msgstr "No s'ha detectat cap targeta de so!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Port del ratol"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"Si us plau, escolliu per cada pas si es repetir la vostra instal穕aci o si "
-"ser manual"
-#
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Configuraci automatitzada dels passos"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Repeteix"
+msgid "Ftp Server"
+msgstr "Servidor FTP"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Ara es configurar un disquet d'instal穕aci autom鄑ica. Aquesta "
-"caracter韘tica 閟 perillosa i s'ha d'utilitzar amb molta cura.\n"
-"\n"
-"Amb aquesta caracter韘tica, sereu capa de repetir la instal穕aci que ja "
-"heu fet en aquest ordinador, tot i que se us consultar en alguns passos, "
-"perqu pugueu canviar els valors.\n"
-"\n"
-"Per m鄕ima seguretat, el particionament i la formataci mai seran executats "
-"autom鄑icament, independentment del que trieu durant la instal穕aci "
-"d'aquest ordinador.\n"
-"\n"
-"Voleu continuar?"
-#
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Configuraci de la instal穕aci autom鄑ica"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "conversi de fonts pfm"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No he trobat el fitxer d'imatge necessari `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Si us plau, seleccioneu el port s鑢ie a qu est connectat el ratol."
-#
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "S'ha produ飔 un error!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"Problemes durant la restauraci de c騪ies de seguretat:\n"
-"\n"
-"Durant el pas de restauraci, el Drakbackup verificar tots\n"
-"els fitxers de les c騪ies de seguretat abans de restaurar-los.\n"
-"Abans de la restauraci, el Drakbackup esborrar \n"
-"els directoris originals, i perdreu totes les vostres \n"
-"dades. 蓅 important de tenir cura i no modificar a m els \n"
-"fitxers de c騪ia de seguretat.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"descripci de les opcions:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Si us plau, aneu amb compte quan feu c騪ies de seguretat amb FTP, \n"
-"perqu nom閟 s'envien al servidor les c騪ies creades correctament.\n"
-"Per tant, ara necessiteu construir la c騪ia de seguretat en el vostre disc \n"
-"dur abans d'enviar-la al servidor.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Descripci:\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comores"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" El Drakbackup s'usa per fer c騪ies de seguretat del sistema.\n"
-" Durant la configuraci podeu seleccionar: \n"
-"\t- Fitxers de sistema\n"
-"\t- Fitxers d'usuari\n"
-"\t- Altres fitxers\n"
-"\to Tot el Sistema... i Altres (com les Particions de Windows)\n"
"\n"
-" El Drakbackup us permet fer c騪ies de seguretat del sistema en:\n"
-"\t- Disc dur\n"
-"\t- NFS\n"
-"\t- CDROM (CDRW), DVDROM (amb arrencada autom鄑ica, rescat i instal穕aci "
-"autom鄑ica)\n"
-"\t- FTP\n"
-"\t- Rsync\n"
-"\t- Webdav\n"
-"\t- Cinta\n"
"\n"
-" El Drakbackup us permet restaurar el sistema a\n"
-" un directori seleccionat d'usuari.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per defecte totes les c騪ies de seguretat es guarden en\n"
-" el directori /var/lib/drakbackup\n"
"\n"
-" Fitxer de Configuraci:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
-"El pas de restauraci:\n"
-" \n"
-" Durant el pas de restauraci, el DrakBackup esborrar \n"
-" els directoris originals i verificar que cap de \n"
-" les c騪ies de seguretat no est malmesa. 蓅 recomanable que \n"
-" feu una 鷏tima c騪ia de seguretat abans de restaurar.\n"
+"\n"
+"Ara es configurar la connexi %s.\n"
"\n"
"\n"
+"Premeu D'acord per continuar."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
-"\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Mode Yaboot"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "EUA (cable)"
+
+#: ../../standalone/drakboot:1
+#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001 MandrakeSoft per DUPONT Sebastien <dupont_s\\@epita.fr>"
+"No s'ha pogut tornar a executar LILO!\n"
+"Executa \"lilo\" com a root a la l韓ia d'ordres per completar la "
+"instal穕aci del tema del LILO."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Ratol gen鑢ic de 3 botons"
+#
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Seleccioneu un altre suport des del qual restaurar"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Gestor de programari"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14342,17 +13787,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"descripci de la restauraci:\n"
@@ -14379,4774 +13826,5404 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"descripci de les opcions:\n"
-"\n"
-" - C騪ia de seguretat dels fitxers de sistema:\n"
-" \n"
-"\tAquesta opci us permet fer c騪ies del directori /etc,\n"
-"\tque cont tots els fitxers de configuraci. Tingueu\n"
-"\tcura durant el pas de restauraci de no sobreescriure:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - C騪ia de seguretat dels fitxers d'usuari: \n"
-"\n"
-"\tAquesta opci permet seleccionar els usuaris dels quals voleu \n"
-"\tfer c騪ia de seguretat.\n"
-"\tPer preservar espai de disc, es recomanable que no inclogueu \n"
-"\tla mem騬ia cau del navegador.\n"
-"\n"
-" - C騪ia de seguretat d'altres fitxers: \n"
-"\n"
-"\tAquesta opci us permet afegir m閟 dades per desar.\n"
-"\tAmb aquesta opci de c騪ia encara no 閟 possible activar\n"
-"\tl'opci de c騪ia incremental.\t\t\n"
-" \n"
-" - C騪ia de seguretat incremental:\n"
-"\n"
-"\tLa c騪ia incremental 閟 l'opci m閟 potent a l'hora de fer \n"
-"\tc騪ies de seguretat. Aquesta opci us permet fer una c騪ia \n"
-"\tde seguretat de totes les dades la primera vegada, i \n"
-"\tnom閟 de les dades canviades despr閟.\n"
-"\tM閟 tard, sereu capa, durant el proc閟 de restauraci, \n"
-"\tde restaurar les dades d'una data determinada.\n"
-"\tSi no s'activa aquesta opci totes les c騪ies de \n"
-"\tseguretat antigues s'esborren abans de cada nova c騪ia. \n"
-"\n"
-"\n"
+msgid "Re-submit"
+msgstr "Torna a enviar"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Alguns errors durant el proc閟 de sendmail s髇 causats per \n"
-" una configuraci dolenta de postfix. Per resoldre-ho haur韊u de\n"
-" definir myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"descripci de les opcions:\n"
-"\n"
-" En aquest pas, el Drakbackup us permet modificar:\n"
-"\n"
-" - El mode de compressi:\n"
-" \n"
-" Si seleccioneu compressi bzip2, comprimireu\n"
-" les dades millor que amb gzip (una millora entre 2-10 %).\n"
-" Aquesta opci no est activada per defecte perqu鑌n"
-" necessita molt m閟 temps (deu vegades m閟).\n"
-" \n"
-" - El mode d'actualitzaci:\n"
-"\n"
-" Aquesta opci us permet actualitzar una c騪ia de seguretat,\n"
-" per no 閟 gaire 鷗il perqu s'han de descomprimir les\n"
-" dades copiades abans de poder-les actualitzar.\n"
-" \n"
-" - El mode .backupignore:\n"
-"\n"
-" Igual que el cvs, el Drakbackup ignorar totes les refer鑞cies\n"
-" incloses en els fitxers .backupignore de cada directori.\n"
-" P.ex.: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "El CD 閟 a lloc. Continua."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "kB"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore"
-msgstr "Restaura"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Interf韈ie de la xarxa"
-#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Fes la c騪ia de seguretat"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litu \"fon鑤ic\" QWERTY"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Configuraci avan鏰da"
+msgid "Net Boot Images"
+msgstr "Imatges d'arrencada de la xarxa"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Auxiliar de configuraci"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Impressores disponibles"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Visualitza la configuraci de la c騪ia de seguretat"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "L'exploraci Plug'n'Play ha fallat. Especifiqueu un monitor"
-#
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Fes la c騪ia de seguretat des del fitxer de configuraci"
+msgid "Services and deamons"
+msgstr "Serveis i dimonis"
#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Configuraci del Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Falta el nom de l'ordinador central remot!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Progr閟 total"
+msgid "with /usr"
+msgstr "amb /usr"
#
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "S'estan enviant els fitxers..."
+msgid "Network"
+msgstr "Xarxa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "fitxers que s'estan enviant per FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Detecta autom鄑icament les impressores connectades a m鄎uines amb Microsoft "
+"Windows"
-#
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "C騪ia de seguretat d'altres fitxers"
+msgid "This password is too simple"
+msgstr "Aquesta contrasenya 閟 massa senzilla"
-#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "C騪ia de seguretat dels fitxers d'usuari"
+msgid "Slovakian (QWERTZ)"
+msgstr "Eslovac (QWERTZ)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "C騪ia de seguretat dels fitxers de sistema"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Sota desenvolupament ... espereu si us plau."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Instal穕aci realment m韓ima (especialment no urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"No s'ha trobat el fitxer de configuraci \n"
-"si us plau, feu clic a 'Auxiliar' o a 'Avan鏰t'."
+" Transfereix-ho \n"
+"ara"
+#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Seleccioneu les dades de les quals voleu fer la c騪ia..."
+msgid "Use daemon"
+msgstr "Utilitza dimoni"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Si us plau seleccioneu el suport per a la c騪ia..."
+msgid "Authentication"
+msgstr "Autenticaci"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Si us plau, seleccioneu les dades per restaurar..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Afegeix aquesta impressora a Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Ara s'instal穕aran els paquets seg黣nts"
+msgid "Additional CUPS servers: "
+msgstr "en servidor CUPS \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"S'ha produ飔 un error en enviar el fitxer a trav閟 d'FTP.\n"
-" Si us plau, corregiu la configuraci de l'FTP."
+"Trieu una de les impressores detectades de la llista, o introdu飖 el nom de "
+"l'ordinador central o la IP i opcionalment el n鷐ero de port (per defecte 閟 "
+"el 9100) en els quadres de text."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
-msgstr ""
-"S'ha produ飔 un error en enviar el correu.\n"
-" El vostre informe no ha estat enviat.\n"
-" Si us plau configureu el sendmail"
+msgid "Where do you want to mount %s?"
+msgstr "On voleu muntar %s?"
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Seg黣nt"
+msgid "Restore Via Network"
+msgstr "Restaura a trav閟 de la xarxa"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Previous"
-msgstr "Anterior"
+msgid "Algeria"
+msgstr "Alg鑢ia"
-#
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Save"
-msgstr "Desa"
+msgid "Initrd-size"
+msgstr "Initrd-size"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Construeix la c騪ia de seguretat"
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore Progress"
-msgstr "Progr閟 de la restauraci"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tLes c騪ies de seguretat utilitzen tar i gzip\n"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Restaura des de cat鄉eg"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Navega per trobar un nou dip騭it de restauraci"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Impressora predeterminada"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CD in place - continue."
-msgstr "El CD 閟 a lloc. Continua."
+msgid "Interface %s (using module %s)"
+msgstr "Interf韈ie %s (utilitzant el m騞ul %s)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Restauraci personalitzada"
+msgid "Name: %s\n"
+msgstr "Nom: %s\n"
-#: ../../standalone/drakbackup:1
+#
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore all backups"
-msgstr "Restaura totes les c騪ies de seguretat"
+msgid "Generating preview ..."
+msgstr "S'est generant la vista pr鑦ia..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "La restauraci ha fallat..."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Files Restored..."
-msgstr "S'han restaurat els fitxers..."
+msgid "serial"
+msgstr "s鑢ie"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "El cam o el m騞ul s髇 necessaris"
+msgid "DVD-ROM"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hostname required"
-msgstr "El nom de l'ordinador central (host) 閟 necessari"
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgi (disposici \"llatina\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Username required"
-msgstr "El nom d'usuari 閟 necessari"
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Password required"
-msgstr "La contrasenya 閟 necess鄏ia"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Ara podeu subministrar les opcions per al m騞ul %s.\n"
+"Tingueu en compte que qualsevol adre鏰 s'ha de prefixar amb 0x, com '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Cam de l'ordinador central o m騞ul"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Nom de l'ordinador central"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restaura mitjan鏰nt el protocol de xarxa: %s"
+msgid "Use ``Unmount'' first"
+msgstr "Utilitzeu primer \"Unmount\""
#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore Via Network"
-msgstr "Restaura a trav閟 de la xarxa"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing mtools packages..."
+msgstr "S'estan instal穕ant els paquets..."
-#: ../../standalone/drakbackup:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-"L'etiqueta de la cinta no 閟 correcta. L'etiqueta d'aquesta cinta 閟 %s."
+msgid "You must specify a root partition"
+msgstr "Heu d'especificar una partici arrel"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Inseriu la cinta amb l'etiqueta de volum %s\n"
-" al dispositiu de cinta %s"
+msgid "first step creation"
+msgstr "creaci del primer pas"
-#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Restaura des de cinta"
+msgid "Both Shift keys simultaneously"
+msgstr "Les dues tecles de Maj鷖cules simult鄋iament"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "L'etiqueta del CD no 閟 correcta. L'etiqueta d'aquest disc 閟 %s."
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "Seleccioneu un esc鄋er"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Inseriu el CD amb l'etiqueta de volum %s\n"
-" a la unitat de CD sota el punt de muntatge /mnt/cdrom"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From CD"
-msgstr "Restaura des de CD"
+msgid "Drakbackup Configuration"
+msgstr "Configuraci del Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "No s'han trobat els fitxers de c騪ia de seguretat a %s"
+msgid "Save as.."
+msgstr "Anomena i desa..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Change\n"
-"Restore Path"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Canvia el cam韁n"
-"on restaurar"
+"Aquesta interf韈ie encara no s'ha configurat.\n"
+"Executeu l'auxiliar de configuraci en la finestra principal"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Korea (North)"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Autologin"
+msgstr "Entrada autom鄑ica"
#
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System configuration"
+msgstr "Configuraci de l'av韘"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Contrasenya de l'administrador del domini"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Restaura els fitxers\n"
-"seleccionats"
+"Mandrake Linux 9.1 us proporciona onze interf韈ies d'usuari totalment "
+"modificables: KDE 3, Gnome 2, WindowMaker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "S'est configurant la impressora \"%s\"..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Restaura l'entrada\n"
-"del cat鄉eg seleccionada"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Esborra els directoris d'usuari abans de restaurar."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Fes una nova c騪ia de seguretat abans de restaurar (nom閟 per les c騪ies "
-"incrementals.)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "seleccioneu el cam al qual restaurar (en comptes de /)"
+msgid "Virgin Islands (British)"
+msgstr "Illes Verge Brit鄋iques"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Restaura altres"
+msgid "Bermuda"
+msgstr "Bermuda"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Restaura els usuaris"
+msgid "click here if you are sure."
+msgstr "feu clic aqu si ho teniu clar."
-#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Restaura el sistema"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"No s'ha trobat el fitxer de configuraci \n"
+"si us plau, feu clic a 'Auxiliar' o a 'Avan鏰t'."
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Other Media"
-msgstr "Altres suports"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Aquestes s髇 les particions de Linux existents que s'han detectat a la\n"
+"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
+"l'auxiliar, \n"
+"s髇 adequades per a un 鷖 normal. Si feu algun canvi, com a m韓im heu de "
+"definir\n"
+"una partici arrel (\"/\"). No escolliu una partici massa petita, o no "
+"podreu\n"
+"instal穕ar prou programari. Si voleu emmagatzemar les dades en una altra "
+"partici, tamb haureu de seleccionar una \"/home\" (nom閟 si teniu m閟 "
+"d'una partici de\n"
+"Linux disponible).\n"
+"\n"
+"Per a la vostra informaci, cada partici est identificada d'aquesta "
+"manera: \"Nom\", \"Capacitat\".\n"
+"\n"
+"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"n鷐ero d'unitat de disc"
+"\",\n"
+"\"n鷐ero de la partici骪" (per exemple, \"hda1\").\n"
+"\n"
+"El \"Tipus d'unitat de disc\" 閟 \"hd\" si la vostre unitat de disc 閟 IDE i "
+"\"sd\" si 閟 SCSI.\n"
+"\n"
+"El \"N鷐ero de la unitat de disc\" 閟 sempre una lletra despr閟 d'\"hd\" o "
+"\"sd\".\n"
+"Amb unitats de disc IDE:\n"
+"\n"
+" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
+"\n"
+" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
+"\",\n"
+"\n"
+" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
+"\",\n"
+"\n"
+" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
+"\".\n"
+"\n"
+"Amb les unitats de disc SCSI, una \"a\" significa \"unitat prim鄏ia de disc"
+"\",\n"
+"una \"b\" significa \"unitat secund鄏ia de disc\", etc."
#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Seleccioneu un altre suport des del qual restaurar"
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, fuzzy, c-format
+msgid "Remove"
+msgstr "Esborra la llista"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Si us plau, entreu el directori on es guarden les c騪ies de seguretat"
+msgid "Lesotho"
+msgstr "Lesotho"
-#
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaura des del disc dur."
+msgid "utopia 25"
+msgstr ""
-#
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Usa la quota de disc per als fitxers de c騪ia de seguretat."
+msgid "Pipe job into a command"
+msgstr "Redirecciona el treball cap a una ordre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "nou nom de dispositiu din鄊ic generat pel devfs intern del nucli"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Si us plau, especifiqueu la mida m鄕ima\n"
-" permesa per a Drakbackup"
+msgid "Yes"
+msgstr "S"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Si us plau, introdu飖 el directori on voleu desar-ho:"
+msgid "Cote d'Ivoire"
+msgstr "Costa d'Ivori"
-#
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Usa el disc dur per fer la c騪ia de seguretat"
+msgid "Which protocol do you want to use?"
+msgstr "Quin protocol voleu utilitzar?"
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Si us plau, seleccioneu la data a restaurar"
+msgid "Restore Progress"
+msgstr "Progr閟 de la restauraci"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Fes primer la c騪ia de seguretat dels fitxers de sistema:"
+msgid "Estonia"
+msgstr "Est騨ia"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Llista d'usuaris per restaurar (nom閟 閟 important la data m閟 recent per "
-"usuari)"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "'D'acord' per restaurar els altres fitxers."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Hi ha un forat a la vostra taula de particions, per no puc utilitzar-lo.\n"
+"L'鷑ica soluci 閟 moure les particions prim鄏ies per fer que el forat quedi "
+"contigu a les particions ampliades"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Configuraci de restauraci "
+msgid "Channel"
+msgstr "Canal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " restaurades amb 鑨it en %s "
+msgid "Add"
+msgstr "Afegeix"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Totes les dades seleccionades han estat "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "No s'ha configurat mai cap connexi compartida a Internet."
+#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Els fitxers de la c騪ia de seguretat estan corromputs"
+msgid " Error while sending mail. \n"
+msgstr " S'ha produ飔 un error en enviar el correu electr騨ic. \n"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Si us plau, desseleccioneu-ho o esborreu-ho la pr騲ima vegada."
+msgid "Keyboard"
+msgstr "Teclat"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Llista de dades corrompudes:\n"
-"\n"
+"Inseriu el CD amb l'etiqueta de volum %s\n"
+" a la unitat de CD sota el punt de muntatge /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Llista de dades per restaurar:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Cap configuraci, si us plau feu clic a 'Auxiliar' o a 'Avan鏰t'.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Escolliu la connexi que voleu configurar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Xarxa per webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Espereu si us plau, s'est configurant el nivell de seguretat..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Xarxa per rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 閟 l'鷏tim en plataformes de desenvolupament"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Xarxa per SSH.\n"
+msgid "Configuring network device %s"
+msgstr "S'est configurant el dispositiu de xarxa %s"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Xarxa per FTP.\n"
+#
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Activa'l ara"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Cinta \n"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
+"connectar-vos a Internet."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "S'estan cercant els paquets a actualitzar"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disc dur.\n"
+msgid "Mount point: "
+msgstr "Punt de muntatge: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Dimoni (%s) inclou:\n"
+msgid "parse all fonts"
+msgstr "analitza totes les fonts"
-#: ../../standalone/drakbackup:1
+#
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLes c騪ies de seguretat utilitzen tar i gzip\n"
+msgid "With X"
+msgstr "Amb X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLes c騪ies de seguretat utilitzen tar i bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Configuraci Multi-head"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incloguis els fitxers de sistema\n"
+msgid "No browser available! Please install one"
+msgstr "No hi ha cap navegador disponible! Si us plau, instal穕eu-ne un"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Voleu conservar els canvis?\n"
+"La configuraci actual 閟:\n"
"\n"
-"- Opcions:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom d'usuari: %s\n"
-"\t\t en el cam: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Desa-ho a trav閟 de %s en l'ordinador central: %s\n"
+"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
+"de tots els usuaris que estan connectats a un ordinador que est郳n"
+"executant el dimoni rwho (similar al finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tEsborra=%s"
+msgid "Domain name"
+msgstr "Nom de domini"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Desa-ho a una cinta en el dispositiu: %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Sharing of local printers"
+msgstr "Impressores disponibles"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " (multi-session)"
-msgstr " (multisessi)"
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " en el dispositiu: %s"
+msgid "Available printers"
+msgstr "Impressores disponibles"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Buit"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Crema a un CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Suprimeix el arxius tar del disc dur en acabar.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Desa-ho en el disc dur en el cam: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Altres fitxers:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
-msgstr ""
"\n"
-"- Fitxers d'usuari:\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "amplada del text"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "On voleu muntar el dispositiu %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "L韘ing per defecte (en segons)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Interf韈ie %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Amb la documentaci b鄐ica (recomanat!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 bot"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Fitxers de sistema:\n"
+"Hi ha %d impressores desconegudes connectades directament a l'ordinador."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"Fonts de la c騪ia: \n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Select user manually"
-msgstr "Seleccioneu l'usuari manualment"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "M閟"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "C騪ia de seguretat dels usuaris"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Quina 閟 la vostra elecci? (predeterminat '%s'%s)"
#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "C騪ia de seguretat del sistema"
+msgid "Raw printer"
+msgstr "Impressora en cru (raw)"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Si us plau, escolliu de qu voleu fer la c騪ia de seguretat"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "el nom del venedor del dispositiu"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "en un dispositiu de cinta"
+msgid "Vendor"
+msgstr "Venedor"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "en CDROM"
+msgid "Interface %s"
+msgstr "Interf韈ie %s"
-#
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "a la xarxa"
+msgid "Configure mouse"
+msgstr "Configura el ratol"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "en el disc dur"
+msgid "Choose the mount points"
+msgstr "Escolliu els punts de muntatge"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Si us plau, escolliu on voleu fer la c騪ia de seguretat"
+msgid "OK"
+msgstr "D'acord"
#
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "M閟 opcions"
+msgid "Yugoslavian (latin)"
+msgstr "Iugoslau (llat)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Quan"
+msgid "Installing"
+msgstr "S'est instal穕ant"
-#
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "On"
+msgid "Launch userdrake"
+msgstr "Executa userdrake"
-#
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "What"
-msgstr "Qu"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "Es tracta d'una instal穕aci o d'una actualitzaci?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Suprimeix els arxius tar del disc dur despr閟 de fer una c騪ia de seguretat "
-"en un altre suport."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Targeta XDSI interna"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Envia un informe per correu electr騨ic despr閟 de cada c騪ia a:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Per compartir el vostre coneixement i ajudar a construir eines per a Linux, "
+"apunteu-vos als f騬ums de discussi que trobareu a les nostres p鄃ines de la "
+"\"Comunitat\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Si us plau assegureu-vos que el dimoni cron est incl騭 en els serveis. \n"
+"Felicitats, la configuraci de xarxa i Internet ha finalitzat.\n"
+"Ara s'aplicar la configuraci al sistema.\n"
"\n"
-"Noteu que ara mateix tots els suports de xarxa tamb fan servir el disc dur."
-#
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Disc dur.\n"
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Si us plau, trieu el\n"
-"suport per a la c騪ia."
#
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Impressora en servidor CUPS remot"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Si us plau, escolliu l'interval \n"
-"de temps entre cada c騪ia de seguretat"
+"蓅 impossible de suprimir la impressora \"%s\" d'Star Office/OpenOffice.org/"
+"GIMP."
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Utilitza dimoni"
+msgid "delete"
+msgstr "suprimeix"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "mensual"
+msgid "here if no."
+msgstr "aqu si no."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Nom de l'ordinador central"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
-msgstr "setmanal"
+msgid "The maximum lease (in seconds)"
+msgstr "L韘ing m鄕im (en segons)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr "di鄏ia"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Si us plau, seleccioneu el port s鑢ie a qu est connectat el ratol."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr "cada hora"
+msgid "Did it work properly?"
+msgstr "Ha funcionat correctament?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disc Dur / NFS"
+msgid "Poor"
+msgstr "Pobre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "The DHCP start range"
+msgstr "L'adre鏰 inicial del rang del DHCP"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Introdu飖 el directori on desar la c騪ia de seguretat:"
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Marqueu aquesta opci si voleu expulsar la cinta en acabar."
+msgid "Unsafe"
+msgstr "No segur"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"Marqueu aquesta opci si voleu esborrar la cinta abans de fer la c騪ia de "
-"seguretat."
+msgid ", %s sectors"
+msgstr ", %s sectors"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Marqueu aquesta opci si voleu emprar el dispositiu no rebobinable."
+msgid "No"
+msgstr "No"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Si us plau, introdu飖 el nom del dispositiu a utilitzar per fer la c騪ia"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Utilitza una cinta per fer la c騪ia de seguretat"
+msgid "Guadeloupe"
+msgstr "Guadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "No s'ha definit cap dispositiu de CD!"
+msgid "could not find any font.\n"
+msgstr "no s'ha trobat cap font.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Si us plau, entreu el nom de dispositiu de l'enregistradora de CD\n"
-" ex: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Voleu que la tecla Enrere efectu un Suprimeix en la consola?"
-#
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Marqueu aquesta opci si feu servir un dispositiu DVDRAM"
+msgid "Vertical refresh rate"
+msgstr "Velocitat de refresc vertical"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Marqueu aquesta opci si feu servir un dispositiu DVDR"
+msgid "Entering step `%s'\n"
+msgstr "S'est entrant en el pas '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Esborra'l ara"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing %s ..."
+msgstr "S'est esborrant %s"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Marqueu aquesta opci si voleu esborrar el suport RW (1a sessi)"
+msgid "Niger"
+msgstr "N韌er"
-#
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Marqueu aquesta opci si feu servir un suport CDRW"
+msgid "No printer"
+msgstr "Cap impressora"
#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Marqueu aquesta opci si voleu un CD multisessi"
+msgid "alert configuration"
+msgstr "Configuraci de l'av韘"
-#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Si us plau, escolliu l'espai disponible en el CD/DVD (en MB)"
+msgid "NetWare Printer Options"
+msgstr "Opcions de la impressora NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Seleccioneu el vostre dispositiu de CD/DVD\n"
-"(Premeu Retorn perqu aquestes opcions es propaguin a d'altres camps.\n"
-"Aquest camp no 閟 necessari, nom閟 閟 una eina per omplir el formulari.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "Vista pr鑦ia del BootSplash %s (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Utilitzar CD/DVDROM per fer la c騪ia de seguretat"
+msgid "General"
+msgstr "General"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-"Cal introduir el nom de l'ordinador central, el nom d'usuari i la "
-"contrasenya!"
+msgid "Printing system: "
+msgstr "Sistema d'impressi: "
-#
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Recorda aquesta contrasenya"
+msgid "Add a user"
+msgstr "Afegeix un usuari"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "Si us plau, introdu飖 la contrasenya"
+msgid "Network configuration (%d adapters)"
+msgstr "Configuraci de xarxa (%d adaptadors)"
-#
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Si us plau, introdu飖 la vostra identificaci (login)"
+msgid "Mandatory package %s is missing"
+msgstr "El paquet %s necessari falta"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Si us plau, entreu el directori (o m騞ul) d'aquest\n"
-"ordinador central on voleu desar la c騪ia de seguretat."
+msgid "Philippines"
+msgstr "Filipines"
-#
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Si us plau, introdu飖 el nom de l'ordinador o la IP."
+msgid "Ok"
+msgstr "D'acord"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Ja hi ha les claus d'un altre programa\n"
-"(diferent del Drakbackup)"
+msgid "Print Queue Name"
+msgstr "Nom de la cua d'impressi"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" Transfereix-ho \n"
-"ara"
+msgid "Do you want to use aboot?"
+msgstr "Voleu utilitzar l'aboot?"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
-"Crea/Transfereix\n"
-"la c騪ia de seguretat de les claus per a SSH"
+msgid "Belarusian"
+msgstr "Bielorr鷖"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Usa Expect en l'SSH"
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
+msgstr ""
+"PDQ nom閟 funciona amb impressores locals, impressores LPD remotes, i "
+"impressores de Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "M鑤ode de xarxa:"
+msgid "Move files to the new partition"
+msgstr "Mou els fitxers a la nova partici"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Empra la connexi de xarxa per fer la c騪ia de seguretat"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
+msgstr ""
#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Users"
-msgstr "Usuaris"
+msgid "Restore From Catalog"
+msgstr "Restaura des de cat鄉eg"
-#
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-"Usa les c騪ies de seguretat incrementals (no reemplacis les c騪ies antigues)"
+msgid "IDE"
+msgstr "IDE"
-#
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Elimina la selecci"
+msgid "group :"
+msgstr "grup :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "No incloguis la mem騬ia cau del navegador"
+msgid "mounting partition %s in directory %s failed"
+msgstr "El muntatge de la partici %s en el directori %s ha fallat"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Si us plau, escolliu tots els usuaris que voleu incloure en la c騪ia de "
-"seguretat."
+msgid "Lilo screen"
+msgstr "Pantalla del LILO"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Amb aquesta opci podreu restaurar qualsevol versi骪n"
-" del directori /etc."
+msgid "LILO with graphical menu"
+msgstr "LILO amb men gr鄁ic"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incloguis fitxers cr韙ics (passwd, group, fstab)"
+msgid "Estimating"
+msgstr "S'est estimant"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-"Usa la c騪ia de seguretat incremental (no reemplacis les c騪ies antigues)"
+msgid "You can't unselect this package. It is already installed"
+msgstr "No podeu desseleccionar aquest paquet; ja est instal穕at"
-#: ../../standalone/drakbackup:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Fes una c騪ia de seguretat dels fitxers del sistema (directori /etc)."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", impressora \"%s\" en servidor SMB/Windows \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aquestes opcions poden fer c騪ia de seguretat i restaurar tots els fitxers "
-"del directory /etc.\n"
+msgid "Go on anyway?"
+msgstr "Voleu seguir igualment?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"\n"
-"Si us plau, marqueu totes les opcions que us calguin.\n"
+"S'estan cercant els paquets disponibles i reconstruint la base de dades "
+"d'rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccioneu els fitxers i directoris i feu clic a 'Afegeix'"
+msgid "Does not appear to be recordable media!"
+msgstr "Sembla que el suport no 閟 enregistrable!"
-#
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Selecci de fitxers"
+msgid "Specify options"
+msgstr "Especifica les opcions"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "No s'ha pogut crear el cat鄉eg!"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " S'ha produ飔 un error en enviar el correu electr騨ic. \n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Cal que subministreu o b el nom del servidor o b la seva IP!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
+"vostre\n"
+"sistema Linux sense dependre del carregador d'arrencada normal. Aix 閟 "
+"鷗il\n"
+"si no voleu instal穕ar el SILO al sistema, o si un altre sistema operatiu\n"
+"elimina el SILO, o si el SILO no funciona amb la vostra configuraci de\n"
+"maquinari. Un disc d'arrencada personalitzat tamb es pot utilitzar amb la\n"
+"imatge de rescat del Mandrake, facilitant molt la recuperaci de fallides\n"
+"serioses del sistema.\n"
"\n"
-"Activitats del Drakbackup a trav鑣 de cinta:\n"
-"\n"
+"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
+"a la primera unitat i premeu \"D'acord\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-"\n"
-"Activitats del Drakbackup a trav閟 del CD:\n"
-"\n"
+"No podeu utilitzar un sistema d'arxius xifrat per al punt de muntatge %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Activitats del Drakbackup a trav閟 de %s:\n"
-"\n"
+msgid "Norfolk Island"
+msgstr "Illa Norfolk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Hi ha hagut un problema en la connexi FTP: No ha estat possible enviar els "
-"fitxers de la c騪ia de seguretat per FTP.\n"
+msgid "Theme installation failed!"
+msgstr "La instal穕aci dels temes ha fallat!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-"llista de fitxers enviada per FTP: %s\n"
-" "
+msgid "Nothing to do"
+msgstr "Res a fer"
-#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "No s'ha fet cap canvi a la c騪ia de seguretat"
+msgid "Use for loopback"
+msgstr "Utilitza per a loopback"
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "C騪ies de seguretat del disc dur..."
+msgid "Mandrake Bug Report Tool"
+msgstr "Eina per a la comunicaci d'errors de programaci (bugs) de Mandrake"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "utilitza pppoe"
#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Fes una c騪ia de seguretat d'altres fitxers..."
+msgid "Moving files to the new partition"
+msgstr "S'estan movent els fitxers a la nova partici"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Progr閟 de la c騪ia de seguretat del disc dur..."
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s amb acceleraci 3D de maquinari EXPERIMENTAL"
-#
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "Backup User files..."
-msgstr "Fes una c騪ia de seguretat dels fitxers d'usuari..."
+msgid "Advanced"
+msgstr "Avan鏰t"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system files..."
-msgstr "Fes una c騪ia de seguretat dels fitxers del sistema..."
+msgid "Transfer"
+msgstr "Transfereix"
-#: ../../standalone/drakbackup:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr "No s'ha trobat cap cinta a %s"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Suec)"
+#
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Hi ha hagut un problema de permisos en accedir al CD."
+msgid "More Options"
+msgstr "M閟 opcions"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Esborrar el suport pot trigar una estona."
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Aquest suport no es pot esborrar!"
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr ""
+"Suprimeix els arxius tar del disc dur despr閟 de fer una c騪ia de seguretat "
+"en un altre suport."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Sembla que el suport no 閟 enregistrable!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
+msgstr ""
+"El cron 閟 un programa UNIX est鄋dard que executa programes determinats\n"
+"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
+"caracter韘tiques al cron b鄐ic, incloent seguretat millorada i opcions\n"
+"de configuraci m閟 potents."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "No s'ha trobat cap unitat de CDR/DVDR!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "La transfer鑞cia WebDAV ha fallat!"
+msgid "Add Client -->"
+msgstr "Afegeix un client -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "El lloc remot WebDAV ja est sincronitzat!"
+msgid "Read carefully!"
+msgstr "Llegiu-ho atentament!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Total progess"
-msgstr "Progr閟 total"
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-"La transfer鑞cia s'ha completat amb 鑨it\n"
-"Comproveu que podeu entrar al servidor amb:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"sense que se us demani una contrasenya."
+"Si us plau,\n"
+"entreu la vostra normativa de tv i el pa韘"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "%s not responding"
-msgstr "%s no respon"
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "No s'ha trobat %s a %s"
+msgid "No (experts only)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "S'ha denegat el perm韘 per transferir %s a %s"
+msgid "No kernel selected!"
+msgstr "No heu seleccionat cap nucli!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Contrasenya incorrecta a %s"
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Premeu Retorn per arrencar el SO seleccionat, 'e' per editar les"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "No es demana cap contrasenya a %s en el port %s"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "S'ha produ飔 un error: no s'ha pogut engendrar %s."
+msgid "The encryption keys do not match"
+msgstr "Les claus de xifratge no coincideixen"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "La generaci de les claus pot trigar una estona."
+msgid "Right \"Windows\" key"
+msgstr "Tecla de \"Windows\" Dreta"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"S'ha trobat %s, voleu suprimir-lo?\n"
-"Av韘: Si ja heu seguit aquest proc閟, probablement us calgui\n"
-"purgar l'entrada del par鄊etre 'authorized_keys' en el servidor."
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-"\n"
-" Detalls de l'Informe del DrakBackup\n"
-"\n"
-"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-"\n"
-" Informe del Dimoni DrakBackup\n"
-"\n"
-"\n"
+"Abans de continuar, haur韊u de llegir amb deteniment les cl鄒sules de la \n"
+"llic鑞cia. Aquesta cobreix la totalitat de la distribuci Mandrake Linux.\n"
+"Si no esteu d'acord amb tots els termes de la llic鑞cia, feu clic al bot骪n"
+"\"Refusa\" i la instal穕aci terminar immediatament. Per continuar amb la\n"
+"instal穕aci, feu clic al bot \"Accepta\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
+"Aqu teniu una llista de les opcions d'impressi disponibles per a la "
+"impressora actual:\n"
"\n"
-" Informe del DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "INFO"
-msgstr "INFORMACI"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Resolutions"
+msgstr "Resolucions"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "WARNING"
-msgstr "AV蚐"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"Configuraci del drakfirewall\n"
+"\n"
+"Aqu es configura un tallafocs personal per a aquest ordinador Linux "
+"Mandrake.\n"
+"Per a una potent soluci de tallafocs dedicada, consulteu si us plau la \n"
+"distribuci especialitzada MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "El cron encara no 閟 disponible per a usuaris que no siguin root"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Introdu飖 el vostre nom d'usuari, la contrasenya i el nom de domini per "
+"accedir a aquesta m鄎uina."
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ha fallat la instal穕aci de %s. S'ha produ飔 l'error seg黣nt:"
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Elimina la selecci"
-#: ../../standalone/drakboot:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "No, no vull l'entrada autom鄑ica"
+msgid "Network configuration"
+msgstr "Configuraci de xarxa"
-#: ../../standalone/drakboot:1
+#
+#: ../../any.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "S, vull l'entrada autom鄑ica amb aquest (usuari, escriptori)"
+msgid "No sharing"
+msgstr "No es comparteix"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Executa la interf韈ie gr鄁ica en iniciar el sistema"
+msgid "Move selected rule down one level"
+msgstr "Baixa la regla actual un nivell"
-#: ../../standalone/drakboot:1
+#: ../../common.pm:1
#, c-format
-msgid "System mode"
-msgstr "Mode de sistema"
+msgid "TB"
+msgstr "TB"
-#: ../../standalone/drakboot:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "Please check if you are using a DVDR device"
+msgstr "Marqueu aquesta opci si feu servir un dispositiu DVDR"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lilo screen"
-msgstr "Pantalla del LILO"
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+"The network address is %s using a netmask of %s.\n"
"\n"
-"Seleccioneu un tema per a\n"
-"lilo i bootsplash, \n"
-"podeu triar-los\n"
-"per separat"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Themes"
-msgstr "Temes"
+msgid "Delete"
+msgstr "Suprimeix"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Splash selection"
-msgstr "Selecci de pantalla de presentaci"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"Actualment utilitzeu %s com a gestor de l'arrencada\n"
-"Feu clic a 'Configura' per executar l'auxiliar de configuraci."
+"Puc configurar el vostre ordinador de manera que executi autom鄑icament la "
+"interf韈ie gr鄁ica durant l'arrencada.\n"
+"Voleu que XFree s'inici quan torneu a arrencar l'ordinador?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Els temes de LILO i de Bootsplash s'han instal穕at amb 鑨it"
+msgid "Build the disk"
+msgstr "Munta el disc"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Theme installation failed!"
-msgstr "La instal穕aci dels temes ha fallat!"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Desconnecta"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Notice"
-msgstr "Av韘"
+msgid "Status:"
+msgstr "Estat:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Torna a executar 'lilo'"
+msgid "HTTP proxy"
+msgstr "Intermediari per a HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
-"No s'ha pogut tornar a executar LILO!\n"
-"Executa \"lilo\" com a root a la l韓ia d'ordres per completar la "
-"instal穕aci del tema del LILO."
+msgid "SSH Server"
+msgstr "Servidor SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Fes que initrd sigui 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Xarxa per rsync.\n"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "No s'ha pogut executar mkinitrd -f /boot/initrd-%s.img %s."
+#
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Protocol europeu"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"No s'ha pogut escriure /etc/sysconfig/bootsplash\n"
-"No s'ha trobat el fitxer."
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", impressora \"%s\", en el servidor \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Write %s"
-msgstr "Escriu %s"
+msgid "Error"
+msgstr "Error"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "No s'ha pogut escriure /etc/sysconfig/bootsplash."
+msgid "allow \"su\""
+msgstr "permet \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo message not found"
-msgstr "No s'ha trobat el missatge de LILO"
+msgid "Australia"
+msgstr "Austr鄉ia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "S'est copiant %s a %s"
+msgid "please wait during ttmkfdir..."
+msgstr "espereu si us plau durant ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Fes una c騪ia de seguretat de %s en %s.old"
+msgid "Configure only card \"%s\"%s"
+msgstr "Configura nom閟 la targeta \"%s\"%s"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Create new theme"
-msgstr "Crea un nou tema"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Level"
+msgstr "nivell"
-#: ../../standalone/drakboot:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Change the printing system"
+msgstr "Modifica el sistema d'impressi"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
msgid ""
-"Display theme\n"
-"under console"
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"Mostra el tema\n"
-"sota la consola"
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Install themes"
-msgstr "Instal穕a els temes"
+"El vostre sistema permet l'鷖 d'una configuraci de m鷏tiples cap鏰ls.\n"
+"Qu voleu fer?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Mode LILO/Grub"
+msgid "Configure services"
+msgstr "Configura els serveis"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Mode Yaboot"
+msgid "Broadcast Address:"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "mount failed: "
+msgstr "ha fallat el muntatge: "
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Fitxer"
+msgid "Image"
+msgstr "Imatge"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configuraci del tipus d'arrencada"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"蓅 impossible d'afegir la impressora \"%s\" a Star Office/OpenOffice.org/"
+"GIMP."
-#: ../../standalone/drakbug:1
+#
+#: ../../services.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "No hi ha cap navegador disponible! Si us plau, instal穕eu-ne un"
+msgid "Remote Administration"
+msgstr "Administraci remota"
-#: ../../standalone/drakbug:1
+#: ../../modules.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "s'est connectant amb l'auxiliar de Bugzilla..."
-
-#
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "No instal穕at"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
+"El suport per a PCMCIA ja no existeix en els nuclis 2.2. Utilitzeu un nucli "
+"2.4."
#
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "No instal穕at"
+msgid "Selected All"
+msgstr "Selecciona-ho tot"
-#: ../../standalone/drakbug:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Eines aut騨omes"
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
#
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Report"
-msgstr "Informa"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"Per trametre un informe d'error de programaci, feu clic al bot 'Informa'.\n"
-"S'obrir una finestra del navegador web amb la p鄃ina https://drakbug."
-"mandrakesoft.com\n"
-"on trobareu un formulari per omplir. La informaci que es mostra m閟 amunt "
-"s'enviar al servidor.\n"
-"\n"
+msgid "Webmin Service"
+msgstr "Servei Webmin"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Release: "
-msgstr "Llan鏰ment: "
+msgid "device"
+msgstr "dispositiu"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Kernel:"
-msgstr "Nucli: "
+msgid "All"
+msgstr "Tots"
#
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Package: "
-msgstr "Paquet: "
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Quin sistema d'impressi (cua) voleu utilitzar?"
-#: ../../standalone/drakbug:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplicaci:"
+msgid "Greece"
+msgstr "Gr鑓ia"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Auxiliars de configuraci"
+msgid "An error occurred"
+msgstr "S'ha produ飔 un error"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Aquest paquet s'ha d'actualitzar.\n"
+"Esteu segur que voleu desseleccionar-lo?"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Eina de migraci des de Windows"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armeni (m鄎uina d'escriure)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Gestor de programari"
+msgid "Printer manufacturer, model, driver"
+msgstr "Fabricant de la impressora, model, controlador"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remote Control"
-msgstr "Control Remot"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"No hi ha cap suport al dispositiu %s o est protegit contra escriptura.\n"
+"Si us plau, inseriu-ne un."
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"El directori %s encara cont dades\n"
+"(%s)"
#
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "Printer on NetWare server"
+msgstr "Impressora en servidor NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "Give the ram size in MB"
+msgstr "Introdu飖 la mida de la RAM en MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Real name"
+msgstr "Nom real"
-#: ../../standalone/drakbug:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Eina de sincronitzaci"
+msgid "done"
+msgstr "fet"
-#: ../../standalone/drakbug:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Auxiliar per a la primera vegada"
+msgid "Please uncheck or remove it on next time."
+msgstr "Si us plau, desseleccioneu-ho o esborreu-ho la pr騲ima vegada."
-#: ../../standalone/drakbug:1
+#
+#: ../../security/level.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Centre de Control Mandrake"
+msgid "Higher"
+msgstr "M閟 Alt"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Eina per a la comunicaci d'errors de programaci (bugs) de Mandrake"
+msgid "Choose the partitions you want to format"
+msgstr "Escolliu les particions que voleu formatar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Parameters"
-msgstr "Par鄊etres"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"No s'ha detectat cap targeta de TV en el vostre ordinador. Si us plau "
+"verifiqueu que teniu correctament inserida una targeta de V韉eo/TV "
+"compatible amb Linux.\n"
+"\n"
+"\n"
+"Podeu visitar la nostra base de dades de maquinari a:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configuraci de la connexi a Internet"
+msgid "Can't find %s on %s"
+msgstr "No s'ha trobat %s a %s"
-#: ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "Client DHCP"
+msgid "Japanese 106 keys"
+msgstr "Japon鑣 de 106 tecles"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Targeta Ethernet"
+msgid "This will take a few minutes."
+msgstr "Aix trigar uns minuts."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Passarel穕a"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connection type: "
-msgstr "Tipus de connexi: "
+msgid "Use scanners on remote computers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Profile: "
-msgstr "Perfil: "
+msgid "Delete selected rule"
+msgstr "Elimina la regla seleccionada"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Configuraci de la connexi a Internet"
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Impressora en servidor CUPS remot"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No teniu cap connexi a Internet.\n"
-"Creeu-ne una fent clic a 'Configura'"
+msgid "Insert a floppy in %s"
+msgstr "Inseriu un disquet a la unitat %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Aquesta interf韈ie encara no s'ha configurat.\n"
-"Executeu l'auxiliar de configuraci en la finestra principal"
+msgid "Maldives"
+msgstr "Maldives"
-#
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "activate now"
-msgstr "Activa'l ara"
+msgid "compact"
+msgstr "compacte"
-#
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "Desactiva'l ara"
+msgid "1 minute"
+msgstr "1 minut"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "Client DHCP"
+msgid "on channel %d id %d\n"
+msgstr "al canal %d amb id %d\n"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
+msgid ", multi-function device"
+msgstr ", dispositiu multifunci"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
+msgid "Laos"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"No hi ha cap partici FAT a la qual canviar la mida o que es pugui utilitzar "
+"com a loopback (o no hi queda prou espai)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Configuraci de la LAN"
+msgid "Up"
+msgstr "Puja"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Tallafoc/Encaminador"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "LAN configuration"
-msgstr "Configuraci de la LAN"
+msgid "Area:"
+msgstr "纑ea:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "(E)IDE/ATA controllers"
msgstr ""
-"No teniu cap interf韈ie configurada.\n"
-"Configureu-la primer fent clic a 'Configura'"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Connecta..."
+msgid "Printer Server"
+msgstr "Servidor de la impressora"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Disconnect..."
-msgstr "Desconnecta..."
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Configuraci de l'av韘"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Not connected"
-msgstr "Sense connexi"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Connectat"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre i Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"Av韘: s'ha detectat una altra connexi a Internet, podria estar utilitzant "
-"la vostra xarxa"
+"\n"
+"Problemes durant la restauraci de c騪ies de seguretat:\n"
+"\n"
+"Durant el pas de restauraci, el Drakbackup verificar tots\n"
+"els fitxers de les c騪ies de seguretat abans de restaurar-los.\n"
+"Abans de la restauraci, el Drakbackup esborrar \n"
+"els directoris originals, i perdreu totes les vostres \n"
+"dades. 蓅 important de tenir cura i no modificar a m els \n"
+"fitxers de c騪ia de seguretat.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Interface:"
-msgstr "Intef韈ie:"
+msgid "saving Bootsplash theme..."
+msgstr "s'est desant el tema Bootsplash..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Passarel穕a:"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Apply"
-msgstr "Aplica"
+msgid "Do you have another one?"
+msgstr "En teniu una altra?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Feu clic aqu per executar l'auxiliar ->"
+msgid ", printing to %s"
+msgstr ", imprimint a %s"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Wizard..."
-msgstr "Auxiliar..."
+#
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Si us plau, introdu飖 el nom de l'ordinador o la IP."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Status:"
-msgstr "Estat:"
+msgid "Toggle to normal mode"
+msgstr "Canvia al mode normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tipus:"
+msgid "Generic"
+msgstr "Gen鑢ic"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Acc閟 a Internet"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindre %d a %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Hostname: "
-msgstr "Nom de l'ordinador central: "
+msgid "New profile..."
+msgstr "Perfil nou..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'鄏ea local..."
+msgid "Which disk do you want to move it to?"
+msgstr "A quin disc ho voleu moure?"
-#
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "State"
-msgstr "Estat"
+msgid "Display logo on Console"
+msgstr "Mostra el logotip a la consola"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Driver"
-msgstr "Controlador"
+msgid "Windows Domain"
+msgstr "Domini de Windows"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protocol"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Interf韈ie %s (utilitzant el m騞ul %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interf韈ie"
+msgid "INFO"
+msgstr "INFORMACI"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Illes Wallis i Futuna"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Configura l'acc閟 a Internet..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Abans cal crear /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Wait please"
-msgstr "Espereu si us plau"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Nom del perfil a crear (el nou perfil es crea com una c騪ia de l'actual):"
+"Malauradament no hi ha m閟 informaci骪n"
+"sobre aquest servei."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "Perfil nou..."
+msgid "Build Single NIC -->"
+msgstr "Munta un NIC senzill -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Perfil a suprimir:"
+msgid "Is this correct?"
+msgstr "Aix 閟 correcte?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Suprimeix el perfil..."
+msgid "Marshall Islands"
+msgstr "Illes Marshall"
-#: ../../standalone/drakconnect:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraci de xarxa (%d adaptadors)"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakedm:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Sense contrasenya"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Build All Kernels -->"
+msgstr "Munta tots els nuclis -->"
-#: ../../standalone/drakedm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choosing a display manager"
+msgid "if set to yes, report unowned files."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
-"No es pot tancar l'mkbootdisk correctament: \n"
-" %s \n"
-" %s"
+"No teniu cap partici d'intercanvi.\n"
+"\n"
+"Voleu continuar igualment?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Falta el nom del Servidor NCP!"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "No es pot bifurcar: %s"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Voleu habilitar l'arrencada des de CD?"
+
+#: ../../help.pm:1
#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"No hi ha cap suport al dispositiu %s o est protegit contra escriptura.\n"
-"Si us plau, inseriu-ne un."
+msgid "Graphical Environment"
+msgstr "Entorn gr鄁ic"
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Assegureu-vos que hi ha un suport al dispositiu %s"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Build the disk"
-msgstr "Munta el disc"
+msgid "on Tape Device"
+msgstr "en un dispositiu de cinta"
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "per que no coincideixin amb"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "<-- Suprimeix un client"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Output"
-msgstr "Sortida"
+msgid "Filesystem type: "
+msgstr "Tipus de sistema de fitxers: "
-#: ../../standalone/drakfloppy:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Elimina un m騞ul"
+msgid "Starting network..."
+msgstr "S'est arrencant la xarxa..."
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vienam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Descripci"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Afegeix un m騞ul"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimitzeu la vostra seguretat"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "omit scsi modules"
-msgstr "omet els m騞uls SCSI"
+msgid "Help"
+msgstr "Ajuda"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if needed"
-msgstr "si cal"
+msgid "Your personal phone number"
+msgstr "El vostre tel鑖on particular"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "omet els m騞uls RAID"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Quina mida voleu deixar per a la partici de Windows?"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "imposa"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"La(es) p鄃ina(es) de prova s'ha(n) enviat a la impressora.\n"
+"Pot passar un cert temps abans no comenci la impressi.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "Arguments opcionals de l'mkinitrd"
+msgid "Username required"
+msgstr "El nom d'usuari 閟 necessari"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"Normalment, el DrakX selecciona el teclat correcte (segons l'idioma que\n"
+"hagueu escollit). Tanmateix, podr韊u tenir un teclat que no correspongu閟 "
+"exactament\n"
+"al vostre idioma, per exemple: si sou un su韘 que parla angl鑣, encara "
+"voldreu\n"
+"que el teclat sigui su韘. O si parleu angl鑣 per viviu al Quebec, us "
+"podeu \n"
+"trobar en la mateixa situaci. En tots dos casos, haureu de tornar a aquest "
+"pas\n"
+"de la instal穕aci i seleccionar un teclat adequat de la llista.\n"
+"\n"
+"Feu clic al bot \"M閟\" per veure la llista completa de teclats disponibles."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "纑ea d'experts"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "kernel version"
-msgstr "versi del nucli"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "default"
-msgstr "predeterminat"
+msgid "mkinitrd optional arguments"
+msgstr "Arguments opcionals de l'mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "General"
-msgstr "General"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "creaci de discs d'arrencada"
+msgid "Protocol for the rest of the world"
+msgstr "Protocol per a la resta del m髇"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Print test pages"
+msgstr "Imprimeix la(es) p鄃ina(es) de prova"
-#: ../../standalone/drakfloppy:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Size"
-msgstr "Mida"
+msgid "64 MB or more"
+msgstr "64 MB o m閟"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module name"
-msgstr "Nom del m騞ul"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Escolliu les p鄃ines de prova que voleu imprimir.\n"
+"Nota: la p鄃ina de prova de fotografia pot ser molt lenta d'imprimir i en "
+"impressores l鄐er amb poca mem騬ia podria no acabar d'imprimir-se. "
+"Normalment n'hi ha prou d'imprimir la p鄃ina de prova est鄋dard."
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
+"Scannerdrake no ha pogut detectar el vostre esc鄋er %s.\n"
+"Si us plau seleccioneu el dispositiu al qual teniu connectat l'esc鄋er"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post-desinstal穕aci"
+msgid "Not formatted\n"
+msgstr "Sense formatar\n"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Esborra fonts del sistema"
+msgid "Periodic Checks"
+msgstr "Comprovacions peri騞iques"
#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Comprovacions inicials"
+msgid "PXE Server Configuration"
+msgstr "Configuraci del servidor dhcpd"
#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Post Install"
-msgstr "Post-instal穕aci"
+msgid "Backup the system files before:"
+msgstr "Fes primer la c騪ia de seguretat dels fitxers de sistema:"
-#: ../../standalone/drakfont:1
+#
+#: ../../security/level.pm:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instal穕a i converteix les Fonts"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Aquesta 閟 la seguretat est鄋dard recomanada per a un ordinador que "
+"s'utilitzar per connectar-se a Internet com a client. Ara hi ha "
+"comprovacions de seguretat."
-#
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copiar les fonts en el vostre sistema"
+msgid "First floppy drive"
+msgstr "Primera unitat de disquet"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remove List"
-msgstr "Esborra la llista"
+msgid "/File/_Quit"
+msgstr "/Fitxer/_Surt"
-#
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Selected All"
-msgstr "Selecciona-ho tot"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unselected All"
-msgstr "Desselecciona-ho tot"
+msgid "Choose the new size"
+msgstr "Escolliu la nova mida"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "here if no."
-msgstr "aqu si no."
+msgid "Media class"
+msgstr "Tipus de mitj"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "El %s no 閟 compatible amb aquesta versi de Mandrake Linux."
+
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
-msgstr "feu clic aqu si ho teniu clar."
+msgid "Faroe Islands"
+msgstr "Illes F鑢oe"
#
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install List"
-msgstr "Llista d'instal穕aci"
+msgid "Restart XFS"
+msgstr "Reinicia l'XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Seleccioneu el fitxer o directori de fonts i feu clic a 'Afegeix'"
+msgid "Add host/network"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-"Abans d'instal穕ar cap font, assegureu-vos que teniu el dret a usar-les i "
-"instal穕ar-les en el vostre sistema.\n"
-"\n"
-"Podeu instal穕ar les fonts de la manera habitual. En casos estranys, fonts "
-"amb errors poden penjar el vostre servidor X."
#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Generic Printers"
-msgstr "Impressores gen鑢iques"
+msgid "Please enter the directory to save to:"
+msgstr "Introdu飖 el directori on desar la c騪ia de seguretat:"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Nom del m騞ul"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "Albania"
+msgstr "Alb鄋ia"
-#
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "No CDR/DVDR in drive!"
+msgstr "No s'ha trobat cap unitat de CDR/DVDR!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "British Indian Ocean Territory"
+msgstr "Territori Brit鄋ic de l'Oce 蚽dic"
-#
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Escolliu les aplicacions que suportaran les fonts:"
+msgid "Normal Mode"
+msgstr "Mode normal"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-" Aquest programa 閟 programari lliure; el podeu redistribuir i/o modificar\n"
-" sota els termes de la 'GNU General Public License' publicada per\n"
-" la Free Software Foundation; tant la versi 2 com (si voleu)\n"
-" qualsevol versi posterior.\n"
-"\n"
-" Aquest programa 閟 distribueix amb l'esperan鏰 que ser 鷗il,\n"
-" per SENSE CAP GARANTIA; sense ni tant sols la garantia impl韈ita de\n"
-" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROP襍IT. Mireu la\n"
-" 'GNU General Public License' per a m閟 detalls.\n"
+"Si us plau assegureu-vos que el dimoni cron est incl騭 en els serveis. \n"
"\n"
-" Haur韊u d'haver rebut una c騪ia de la 'GNU General Public License'\n"
-" amb el programa; si no 閟 aix, escriviu a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "Abandona"
+"Noteu que ara mateix tots els suports de xarxa tamb fan servir el disc dur."
#
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Llista de fonts"
+msgid "Printer connection type"
+msgstr "Tipus de connexi de la impressora"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Advanced Options"
-msgstr "Opcions avan鏰des"
+msgid "No network adapter on your system!"
+msgstr "No teniu cap adaptador de xarxa al sistema!"
#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstal穕a fonts"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Xarxa"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Aconsegueix les fonts de Windows"
+msgid "Malayalam"
+msgstr ""
-#
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Importaci de fonts"
+msgid "Option %s out of range!"
+msgstr "L'opci %s est fora de rang!"
-#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "done"
-msgstr "fet"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connect %s"
+msgstr "Connecta"
#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "xfs restart"
-msgstr "reinicialitzaci de l'xfs"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "Reinicia l'XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Suprimeix els fitxers de fonts"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "S'est imprimint/escanejant/llegint targetes de fotos en \"%s\""
-#
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Reinicia l'XFS"
+msgid "Duplicate mount point %s"
+msgstr "Duplica el punt de muntatge %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Suprimeix els fitxers temporals"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "construcci de type1inst"
+msgid "Connection Configuration"
+msgstr "Configuraci de la connexi"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "conversi de fonts pfm"
+msgid "Unknown|Generic"
+msgstr "Desconegut|Gen鑢ic"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "ttf fonts conversion"
-msgstr "convesi de fonts ttf"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Ara esteu instal穕ant el Mandrake Linux, per 閟 probable que alguns "
+"paquets\n"
+"hagin estat actualitzats desde la data de llan鏰ment. Alguns errors poden "
+"haver\n"
+"estat resolts, i altres problemes de seguretat poden estar ja corregits. "
+"Per\n"
+"beneficiar-vos d'aquestes actualitzacions, us proposem de baixar-les "
+"d'Internet.\n"
+"Trieu \"S韁" si teniu una connexi a Internet operativa, o \"No\" si voleu\n"
+"instal穕ar-les m閟 tard.\n"
+"\n"
+"Si trieu \"S韁" apareixer una llista de llocs des d'on podeu baixar-vos "
+"les\n"
+"actualitzacions. Escolliu la ubicaci m閟 propera. Aleshores, apareixer "
+"un \n"
+"arbre de selecci de paquets: comproveu la selecci i premeu \"Instal穕a\" "
+"per\n"
+"baixar i instal穕ar els paquets seleccionats, o \"Cancel穕a\" per abandonar."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "referenciat Ghostscript"
+msgid "Quit"
+msgstr "Surt"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Conversi de fonts"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr "Instal穕aci de True Type feta"
+msgid "Auto allocate"
+msgstr "Assigna autom鄑icament"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "espereu si us plau durant ttmkfdir..."
+msgid "Check bad blocks?"
+msgstr "Voleu comprovar els blocs incorrectes?"
#
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Instal穕aci de les fonts True Type"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Altres suports"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(en aquest ordinador)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Benvingut a l'auxiliar de configuraci de la impressora\n"
+"\n"
+"Aquest auxiliar us ajudar a instal穕ar les impressores connectades a aquest "
+"ordinador.\n"
+"\n"
+"Si teniu impressores connectades a aquesta m鄎uina, endolleu-les i engegueu-"
+"les per tal de poder-les detectar autom鄑icament.\n"
+"\n"
+"Feu clic a \"Seg黣nt\" quan estigueu preparat, o a \"Cancel穕a\" si no voleu "
+"configurar ara les impressores."
#
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "C騪ia de fonts"
+msgid "Authentication NIS"
+msgstr "Autenticaci NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Cerca les fonts en la llista de les instal穕ades"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"L'opci \"Limita les opcions de la l韓ia d'ordres\" no t cap utilitat sense "
+"una contrasenya"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "no s'ha trobat cap font.\n"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "La connexi a Internet compartida est habilitada"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Torna a seleccionar les fonts correctes"
+msgid "Card IO_0"
+msgstr "E/S_0 de la Targeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "no s'ha pogut trobar cap font en les particions muntades"
+msgid "United Arab Emirates"
+msgstr "Uni dels Emirats 纑abs"
-#
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "no fonts found"
-msgstr "no s'han trobat fonts"
+msgid "Card IO_1"
+msgstr "E/S_1 de la Targeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "analitza totes les fonts"
+msgid "Thailand"
+msgstr "Tail鄋dia"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Desselecciona les fonts instal穕ades"
+msgid "Routers:"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Cerca les fonts instal穕ades"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
msgstr ""
-"Benvingut a la utilitat de compartici de la connexi a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a 'Configura' per executar l'auxiliar de configuraci."
+"Refresca la llista d'impressores (per veure totes les impressores CUPS "
+"remotes disponibles)"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Configuraci de la compartici de la connexi a Internet"
+msgid "Mandrake Linux Installation %s"
+msgstr "Instal穕aci del Mandrake Linux %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No s'ha configurat mai cap connexi compartida a Internet."
+msgid "Thai keyboard"
+msgstr "Teclat tai"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuraci ja s'ha realitzat i ara est habilitada."
+msgid "Dialup options"
+msgstr "Opcions de marcatge"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuraci ja s'ha realitzat, per ara est inhabilitada."
+msgid "Bouvet Island"
+msgstr "Illa Bouvet"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Ja est tot configurat.\n"
-"Ara podeu compartir la connexi a Internet amb altres ordinadors de la "
-"vostra xarxa d'鄏ea local utilitzant la configuraci autom鄑ica de xarxa "
-"(DHCP)."
+"Canvieu el CD-ROM!\n"
+"\n"
+"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i despr閟\n"
+"premeu D'acord.\n"
+"Si no el teniu, premeu Cancel穕a per no fer la instal穕aci des d'aquest CD-"
+"ROM."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instal穕ar el paquet %s"
+msgid "Polish"
+msgstr "Polon鑣"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seqncies, instal穕ant el programari, iniciant els "
-"servidors..."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring..."
-msgstr "S'est configurant..."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Xarxa per webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"S'ha trobat un conflicte potencial d'adre鏰 LAN en la configuraci actual de "
-"%s!\n"
+"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
+"executeu l'eina de configuraci de maquinari."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La xarxa local no finalitza amb '.0', ho deixem c髍rer."
+msgid "Netmask"
+msgstr "Subm鄐cara de xarxa"
-#: ../../standalone/drakgw:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Torna a configurar la interf韈ie i el servidor DHCP"
+msgid "No hard drives found"
+msgstr "No s'ha trobat cap disc dur!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "L韘ing m鄕im (en segons)"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "L韘ing per defecte (en segons)"
+msgid "2 buttons"
+msgstr "2 botons"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "L'adre鏰 final del rang del DHCP"
+msgid "What kind is your ISDN connection?"
+msgstr "Quin tipus de connexi XDSI teniu?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "L'adre鏰 inicial del rang del DHCP"
+msgid "Label"
+msgstr "Etiqueta"
-#
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Nom intern de domini"
+msgid "Save on floppy"
+msgstr "Desa al disquet"
#
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "IP del Servidor DNS"
+msgid "Printer auto-detection"
+msgstr "Detecci autom鄑ica d'impressores"
-#
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "Quina targeta XDSI teniu?"
+
+#: ../../services.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP d'aquest servidor DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"L'NFS 閟 un protocol popular de compartici de fitxers en xarxes TCP/IP.\n"
+"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
+"configura mitjan鏰nt el fitxer /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Msec"
+msgstr "Msec"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-"Configuraci del servidor DHCP.\n"
-"\n"
-"Aqu podreu seleccionar diverses opcions per a la configuraci del servidor "
-"DHCP.\n"
-"Si no sabeu el significat d'una opci, deixeu-la com est.\n"
+"=> Av韘, una etiqueta ha canviat:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "Adre鏰 de la xarxa local"
+msgid "Number of capture buffers:"
+msgstr "Nombre de mem騬ies interm鑔ies de captura:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Quina 閟 la vostra elecci? (0/1, predeterminat '%s')"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Podeu conservar la configuraci actual i assumir que ja heu definit un "
-"servidor DHCP. En aquest cas, verifiqueu que s'ha llegit correctament la "
-"xarxa de classe C que utilitzeu per a la vostra xarxa local. No es "
-"reconfigurar ni es modificar la configuraci del servidor DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"L'entrada DNS per defecte 閟 el servidor de noms amb mem騬ia cau que s'ha "
-"configurat al tallafoc. Podeu substituir-lo, per exemple, per la IP del DNS "
-"del vostre prove飀or d'acc閟.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-"Alternativament, podeu reconfigurar la interf韈ie i (re)configurar un "
-"servidor DHCP per a 鷖 propi.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Configuraci actual de '%s':\n"
+"Per poder-les utilitzar, cal formatar les particions que s'acaben de "
+"definir\n"
+"(la formataci consisteix a crear-hi un sistema de fitxers).\n"
"\n"
-"Xarxa: %s\n"
-"Adre鏰 IP: %s\n"
-"Atribuci IP: %s\n"
-"Controlador: %s"
+"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
+"existents per eliminar les dades que contenen. Si 閟 aix, seleccioneu "
+"tamb閈n"
+"aquestes particions.\n"
+"\n"
+"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
+"existien; heu de tornar a formatar les particions que contenen el sistema\n"
+"operatiu (com ara \"/\", \"/usr\" o \"/var\"), per no les que contenen "
+"dades\n"
+"que voleu conservar (habitualment, \"/home\").\n"
+"\n"
+"Aneu amb compte en seleccionar les particions; despr閟 de la formataci, "
+"totes\n"
+"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
+"\n"
+"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
+"\n"
+"Feu clic a \"Cancel穕a\" si voleu seleccionar una altra partici per "
+"instal穕ar\n"
+"el nou sistema Mandrake Linux.\n"
+"\n"
+"Feu clic a \"Avan鏰t\" si voleu que es busquin sectors defectuosos del disc "
+"en\n"
+"alguna de les particions."
-#
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Franc鑣"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Txec (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Mostra la configuraci actual de la interf韈ie"
+msgid "Hardware probing in progress"
+msgstr "Detecci en proc閟"
-#
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Servei Xinetd"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Mostra la configuraci actual de la interf韈ie"
+msgid "Summary"
+msgstr "Resum"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No (experts only)"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
+" (Ports Paral穕el: /dev/lp0, /dev/lp1, etc., equivalents a LPT1:, LPT2:, "
+"etc.; 1a impressora USB: /dev/usb/lp0, 2a impressora USB: /dev/usb/lp1, "
+"etc.)."
#
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguraci autom鄑ica"
+msgid "Next"
+msgstr "Seg黣nt"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "No podeu instal穕ar el carregador de l'arrencada a una partici %s\n"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Av韘: l'adaptador de xarxa (%s) ja est configurat.\n"
"\n"
-"Voleu fer una reconfiguraci autom鄑ica?\n"
+"Benvingut.\n"
"\n"
-"Ho podeu fer manualment per heu de saber qu feu."
+"Els par鄊etres de la instal穕aci autom鄑ica estan disponibles en les "
+"seccions de l'esquerra"
-#
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "La intef韈ie de xarxa ja est configurada"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectar a la vostra "
-"xarxa d'鄏ea local."
+"el paquet 'ImageMagick' 閟 necessari per a un correcte funcionament.\n"
+"Feu clic a \"D'acord\" per intal穕ar-lo o a \"Cancel穕a\" per sortir"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litu \"fila de n鷐eros\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Nom閟 teniu un adaptador de xarxa configurat al sistema:\n"
+"Se suprimiran els seg黣nts paquets per poder actualitzar el sistema: %s\n"
"\n"
-"%s\n"
"\n"
-"Ara es configurar la vostra xarxa d'鄏ea local amb aquest adaptador."
+"Voleu realment suprimir aquests paquets?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Interf韈ie de la xarxa"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "Domini del NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuraci de maquinari."
+"\n"
+"- Fitxers d'usuari:\n"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
+msgid "Antarctica"
+msgstr "Ant鄏tida"
-#: ../../standalone/drakgw:1
+#
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interf韈ie %s"
+msgid "Mount options"
+msgstr "Opcions de muntatge"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interf韈ie %s (utilitzant el m騞ul %s)"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Servei Xinetd"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
+msgstr ""
+"Assigna els dispositius en cru (raw) a dispositius de blocs (tals com les "
+"particions de\n"
+"disc dur), perqu siguin utilitzats per aplicacions com ara Oracle"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Please wait, preparing installation..."
+msgstr "Espereu si us plau, s'est preparant la instal穕aci..."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTZ)"
+msgstr "Txec (QWERTZ)"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Track network card id (useful for laptops)"
msgstr ""
-"Ara es configurar l'ordinador per tal que comparteixi la connexi a "
-"Internet.\n"
-"Amb aquesta caracter韘tica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexi a Internet d'aquest ordinador.\n"
-"\n"
-"Assegureu-vos d'haver configurat l'acc閟 a Internet i a la xarxa local amb "
-"el drakconnect abans de continuar.\n"
-"Nota: per configurar una xarxa d'鄏ea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
+"Fes el seguiment de l'identificador de la targeta de xarxa (d'utilitat per a "
+"port鄑ils)"
-#: ../../standalone/drakgw:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Connexi a Internet compartida"
+msgid "The port number should be an integer!"
+msgstr "El n鷐ero de port ha de ser enter!"
-#: ../../standalone/drakgw:1
+#
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ara, la connexi compartida a Internet est habilitada."
+msgid "You must choose an image file first!"
+msgstr "Abans heu de triar un fitxer d'imatge!"
-#: ../../standalone/drakgw:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
+msgid "Restore from Hard Disk."
+msgstr "Restaura des del disc dur."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dismiss"
-msgstr "deixa-ho c髍rer"
+msgid "Add to LVM"
+msgstr "Afegeix a l'LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "torna a configurar"
+msgid "DNS server"
+msgstr "Servidor DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "enable"
-msgstr "habilita"
+msgid "Trinidad and Tobago"
+msgstr "Trinitat i Tobago"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuraci de la connexi compartida a Internet ja s'ha dut a terme.\n"
-"Ara est inhabilitada.\n"
-"\n"
-"Qu voleu fer?"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD i LPRng no funcionen amb impressores IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexi a Internet compartida est inhabilitada"
+msgid "simple"
+msgstr "senzill"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ara, la compartici de la connexi a Internet est inhabilitada."
+msgid "Clear all"
+msgstr "Buida-ho tot"
-#: ../../standalone/drakgw:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
+msgid "No test pages"
+msgstr "Cap p鄃ina de prova"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "disable"
-msgstr "inhabilita"
+msgid "Adapter %s: %s"
+msgstr "Adaptador %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Illes Malvines (Falkland)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Model desconegut"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"La configuraci de la connexi compartida a Internet ja s'ha dut a terme.\n"
-"Ara est habilitada.\n"
-"\n"
-"Qu voleu fer?"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autenticaci"
+
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexi a Internet compartida est habilitada"
+msgid "Backup Now"
+msgstr "Fes la c騪ia de seguretat"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Nom閟 s'accepten nuclis de la s鑢ie 2.4."
+msgid "/_File"
+msgstr "/_Fitxer"
-#: ../../standalone/drakhelp:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "S'est suprimint la impressora d'Star Office/OpenOffice.org/GIMP"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Executa el filtratge de paquets per als nuclis Linux 2.2, per instal穕ar\n"
+"un tallafoc que protegeixi el vostre ordinador d'atacs des de la xarxa."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (TSCII)"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Cam"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "group :"
-msgstr "grup :"
+msgid "Creating auto install floppy..."
+msgstr "S'est creant el diquet d'instal穕aci autom鄑ica"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Impressores disponibles"
#
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "user :"
-msgstr "usuari :"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Partitioning"
+msgstr "Impressi"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "Selecci del cam"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Russia"
+msgstr "Rus"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "si ho marqueu, no es canviaran ni el propietari ni el grup"
+msgid "ethernet card(s) detected"
+msgstr "s'han detectat una o diverses targetes Ethernet"
-#: ../../standalone/drakperm:1
+#
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Usa l'identificador del grup (GID) per a l'execuci"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Usa l'identificador del propietari (UID) per a l'execuci"
+msgid "Can't create catalog!"
+msgstr "No s'ha pogut crear el cat鄉eg!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-"Usat per al directori:\n"
-" nom閟 el propietari del directori o del fitxer en aquest directori poden "
-"suprimir-lo"
-#: ../../standalone/drakperm:1
+#
+#: ../../fsedit.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Not enough free space for auto-allocating"
+msgstr "No hi ha prou espai per a l'assignaci autom鄑ica"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Set root password"
+msgstr "Estableix la contrasenya de root"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
+"de so (%s), que actualment fa servir \"%s\""
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Property"
-msgstr "Propietat"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Despr閟 de canviar la mida de la partici %s, se'n perdran totes les dades"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Permissions"
-msgstr "Permisos"
+msgid "Internet connection configuration"
+msgstr "Configuraci de la connexi a Internet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Current user"
-msgstr "Usuari actual"
+msgid "Scanning for TV channels"
+msgstr "S'estan cercant canals de TV"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "browse"
-msgstr "navega"
+msgid "Kernel:"
+msgstr "Nucli: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit current rule"
-msgstr "Edita la regla actual"
+msgid "/_About..."
+msgstr "/_Quant a..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "edit"
-msgstr "edita"
+msgid "Bengali"
+msgstr "Bengal"
-#
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Elimina la regla seleccionada"
+msgid "Preference: "
+msgstr "Prefer鑞cia: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "suprimeix"
+msgid "Wizard..."
+msgstr "Auxiliar..."
-#
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Afegeix una regla nova al final"
+msgid "Services: %d activated for %d registered"
+msgstr "Serveis: %d activats per %d registrats"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "add a rule"
-msgstr "afegeix una regla"
+msgid "Create a bootdisk"
+msgstr "Crea un disc d'arrencada"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Baixa la regla actual un nivell"
+msgid "Solomon Islands"
+msgstr "Illes Salom"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Down"
-msgstr "Baixa"
+msgid "(module %s)"
+msgstr "(m騞ul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Puja la regla actual un nivell"
+msgid "Workgroup"
+msgstr "Grup de treball"
-#: ../../standalone/drakperm:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Up"
-msgstr "Puja"
+msgid "Printer host name or IP"
+msgstr "Nom o IP de l'ordinador central de la impressora"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "seleccioneu el fitxer perm que voleu veure/editar"
+msgid "Host Path or Module"
+msgstr "Cam de l'ordinador central o m騞ul"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"El Drakperm s'usa per veure els fitxers que es faran servir per ajustar els "
-"permisos, propietaris i grups a trav閟 de l'msec.\n"
-"Tamb podeu editar les vostres pr騪ies regles, que sobreescriuran les regles "
-"predeterminades."
+"El nom de la impressora nom閟 pot constar de lletres, n鷐eros i el car郼ter "
+"de subratllat"
-#: ../../standalone/drakperm:1
+#
+#: ../../standalone/drakgw:1
#, c-format
-msgid "permissions"
-msgstr "permisos"
+msgid "Show current interface configuration"
+msgstr "Mostra la configuraci actual de la interf韈ie"
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "group"
-msgstr "grup"
+msgid "Development"
+msgstr "Desenvolupament"
-#
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "user"
-msgstr "usuari"
+msgid "Done"
+msgstr "Fet"
-#: ../../standalone/drakperm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "path"
-msgstr "cam"
+msgid "Web Server"
+msgstr "Servidor Web"
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "S'est creant el disquet d'instal穕aci autom鄑ica"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr "\tNo incloguis els fitxers de sistema\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Chile"
+msgstr "Xile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
+"Els controladors per a la inkjet proporcionats per Lexmark nom閟 funcionen "
+"amb impressores locals, i no amb impressores en ordinadors remots o "
+"servidors d'impressi. Si us plau, connecteu la vostra impressora a un port "
+"local o configureu-la en l'ordinador on est connectada."
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "No s'ha trobat cap impressora!"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (instal穕aci del controlador de pantalla)"
-
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
+"El vostre dispositiu multifunci ha estat configurat autom鄑icament per "
+"poder escanejar. Ara podeu escanejar amb \"scanimage\" (\"scanimage -d hp:%s"
+"\" per especificar l'esc鄋er si n'hi ha m閟 d'un) des de la l韓ia d'ordres o "
+"amb les interf韈ies gr鄁iques \"xscanimage\" o \"xsane\". Si esteu "
+"utilitzant el GIMP, tamb podeu escanejar escollint el punt apropiat en el "
+"men \"Fitxer\"/\"Adquireix\". Executeu \"man scanimage\" a la l韓ia "
+"d'ordres per a m閟 informaci.\n"
+"\n"
+"No utilitzeu \"scannerdrake\" amb aquest dispositiu!"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP end ip"
-msgstr "L'adre鏰 final del rang del DHCP"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP start ip"
-msgstr "L'adre鏰 inicial del rang del DHCP"
-
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(ja s'ha afegit %s)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interf韈ie %s (utilitzant el m騞ul %s)"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ", utilitzant l'ordre %s"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr "Tecles d'Alternativa i de Maj鷖cules simult鄋iament"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Ara es configurar l'ordinador per tal que comparteixi la connexi a "
-"Internet.\n"
-"Amb aquesta caracter韘tica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexi a Internet d'aquest ordinador.\n"
-"\n"
-"Assegureu-vos d'haver configurat l'acc閟 a Internet i a la xarxa local amb "
-"el drakconnect abans de continuar.\n"
-"Nota: per configurar una xarxa d'鄏ea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Configuraci del servidor dhcpd"
-
-#
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Configuraci del servidor dhcpd"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Add/Del Users"
+msgstr "Afegeix/Suprimeix usuaris"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Espereu si us plau, s'estan configurant les opcions de seguretat..."
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Espereu si us plau, s'est configurant el nivell de seguretat..."
+msgid "weekly"
+msgstr "setmanal"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Comprovacions peri騞iques"
+msgid "Settings"
+msgstr "Par鄊etres"
-#
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Opcions de sistema"
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Here is the full list of available countries"
+msgstr "Aquesta 閟 la llista completa de teclats disponibles"
#
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Opcions de xarxa"
+msgid "Alternative test page (A4)"
+msgstr "P鄃ina de prova alternativa (A4)"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Les opcions seg黣nts es poden modificar per personalitzar la seguretat\n"
-"del vostre sistema. Feu clic a \"Ajuda\" si voleu m閟 informaci.\n"
+"Si teniu tots els CD de la llista de sota, feu clic a 'D'acord'.\n"
+"Si no teniu cap d'aquests CD, feu clic a 'Cancel穕a'.\n"
+"Si nom閟 falten alguns CD, desseleccioneu-los i feu clic a 'D'acord'."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Administrador de seguretat:"
+msgid "Wait please"
+msgstr "Espereu si us plau"
-#
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Alarmes de seguretat:"
+msgid "PAP"
+msgstr "PAP"
#
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Nivell de seguretat:"
+msgid "Backup user files"
+msgstr "C騪ia de seguretat dels fitxers d'usuari"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (per defecte: %s)"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "New"
+msgstr "Nou"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Est鄋dard: Aquesta 閟 la seguretat est鄋dard recomanada per a un ordinador "
-"que es connectar a Internet com a client.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Alta: Hi ha algunes restriccions, i cada nit s'executen m閟 tests que "
-"al nivell est鄋dard.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"M閟 alta: La seguretat 閟 prou elevada perqu el sistema funcioni com a "
-"servidor que pugui acceptar connexions de diversos clients. Si aquesta "
-"m鄎uina nom閟 ser un client a Internet, haur韊u de triar un nivell m閟 "
-"baix.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoic: Similar al nivell anterior, per el sistema es tanca completament "
-"i les caracter韘tiques de seguretat estan al m鄕im\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Administrador de seguretat:\n"
-" Si les \"Alarmes de seguretat\" estan activades, s'enviaran a "
-"aquest usuari (nom d'usuari o adre鏰 electr騨ica)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Aquesta 閟 la decisi m閟 important quant a la seguretat del vostre sistema\n"
+"GNU/Linux: heu d'introduir la contrasenya de l'usuari \"root\". El \"root\" "
+"閟\n"
+"l'administrador del sistema i 閟 l'鷑ic autoritzat a fer actualitzacions,\n"
+"afegir usuaris, canviar la configuraci del tot el sistema, etc. De fet,\n"
+"el \"root\" pot fer de tot! Per aix heu d'escollir una contrasenya que "
+"sigui\n"
+"dificil d'endevinar. DrakX us avisar si 閟 massa f郼il. Com veieu, podeu \n"
+"optar per no introduir cap contrasenya, per no 閟 gens prudent per una\n"
+"鷑ica ra: el fet d'arrencar GNU/Linux no fa que els vostres altres "
+"\"sistemes\n"
+"operatius\" estiguin lliures d'errors. Com que l'usuari \"root\" pot "
+"superar\n"
+"totes les limitacions i esborrar accidentalment totes les dades de "
+"qualsevol\n"
+"partici com a conseqncia d'accedir sense precaucions a les particions en "
+"si,\n"
+"閟 molt important que sigui dif韈il esdevenir \"root\".\n"
"\n"
+"La contrasenya hauria de ser una mescla de car郼ters alfanum鑢ics i, com a \n"
+"m韓im, de 8 car郼ters de longitud. No escrigueu mai la contrasenya de \"root"
+"\"\n"
+"ja que 閟 molt f郼il comprometre el sistema si ho feu.\n"
"\n"
+"De totes maneres, no feu la contrasenya massa llarga o complicada perqu鑌n"
+"heu de ser capa鏾s de recordar-la sense gaire esfor.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"La contrasenya no es mostrar per pantalla quan la teclegeu. Per tant, \n"
+"haureu d'escriure-la dues vegades per reduir la probabilitat d'errors\n"
+"en l'escriptura. Si, malauradament, feu el mateix error dues vegades, "
+"haureu\n"
+"d'usar aquesta contrasenya \"incorrecta\" el primer cop que us connecteu.\n"
"\n"
+"En el mode Expert, se us preguntar si us voleu connectar a un servidor\n"
+"d'autentificaci, com ara NIS o LDAP.\n"
"\n"
+"Si la vostra xarxa usa LDAP, NIS o l'autenticaci de domini Windows PDC,\n"
+"seleccioneu l'opci corresponent com a autenticaci. Si no ho sabeu, "
+"pregunteu\n"
+"al vostre administrador de la xarxa.\n"
"\n"
-"Nota: si teniu una targeta de so ISA PnP, haureu de fer servir el programa "
-"sndconfig. Nom閟 cal que teclegeu \"sndconfig\" a la consola."
+"Si el vostre ordinador no es connecta a cap xarxa administrada, haureu \n"
+"d'escollir \"Fitxers Locals\" per a l'autenticaci."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"No s'ha detectat cap targeta de so en el vostre ordinador. Si us plau, "
-"verifiqueu que teniu correctament inserida una targeta de so compatible amb "
-"Linux.\n"
-"\n"
-"\n"
-"Podeu visitar la nostra base de dades de maquinari a:\n"
+"Ara 閟 el moment de triar el nivell de seguretat desitjat per a la m鄎uina.\n"
+"Com a norma general, com m閟 s'exposa un ordinador i com m閟 vitals s髇 les\n"
+"dades que s'hi emmagatzemen, m閟 alt ha de ser el nivell de seguretat.\n"
+"Tanmateix, un nivell alt de seguretat sovint comporta una disminuci de la\n"
+"facilitat d'鷖. Consulteu el cap韙ol \"msec\" del \"Manual de Refer鑞cia\"\n"
+"per obtenir m閟 informaci sobre el significat dels nivells de seguretat.\n"
"\n"
+"Si no sabeu quin escollir, deixeu l'opci per defecte."
+
+#
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Carrega des del disquet"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr ""
+"Les impressores seg黣nts\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/draksound:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "No s'ha detectat cap targeta de so!"
+msgid "Boot Floppy"
+msgstr "Disquet d'arrencada"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "Vista pr鑦ia del BootSplash %s (%s)"
+msgid "Norwegian"
+msgstr "Noruec"
-#
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Impressores disponibles"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Generating preview ..."
-msgstr "S'est generant la vista pr鑦ia..."
+msgid "Apache World Wide Web Server"
+msgstr "Servidor World Wide Web Apache"
-#
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Abans heu de triar un fitxer d'imatge!"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Selecci del color de la barra de progr閟"
+msgid "select path to restore (instead of /)"
+msgstr "seleccioneu el cam al qual restaurar (en comptes de /)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
-"Aquest tema encara no t cap pantalla de presentaci de l'arrencada en %s!"
+msgid "Configure bootsplash picture"
+msgstr "Configura la imatge de presentaci de l'arrencada"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "s'est desant el tema Bootsplash..."
+msgid "China"
+msgstr "Xina"
#
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose image file"
-msgstr "trieu un fitxer d'imatge"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+" (Assegureu-vos que totes les impressores estan connectades i engegades.)\n"
-#
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Ge騬gia"
+
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "trieu un fitxer d'imatge"
+msgid "Reading data of installed printers..."
+msgstr "Impressores disponibles"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Configura la imatge de presentaci de l'arrencada"
+msgid " Erase Now "
+msgstr " Esborra'l ara"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Fes que, per defecte, no apareguin els missatges del nucli"
+msgid "server"
+msgstr "servidor"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Mostra el logotip a la consola"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose color"
-msgstr "Escolliu un color"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Save theme"
-msgstr "Desa el tema"
+msgid "Please Wait... Applying the configuration"
+msgstr "Espereu si us plau... s'est aplicant la configuraci"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Preview"
-msgstr "Vista pr鑦ia"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "el color de la barra de progr閟"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "l'al玎ria de la barra de progr閟"
+msgid "SCSI controllers"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "l'amplada de la barra de progr閟"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " en servidor LPD \"%s\", impressora \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
msgstr ""
-"coordenada y de la cantonada superior\n"
-"esquerra de la barra de progr閟"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Nom de l'ordinador central"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "L'adre鏰 IP ha d'estar en format 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Equador"
+
+#
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Add an item"
+msgstr "Afegeix un element"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"coordenada x de la cantonada superior\n"
-"esquerra de la barra de progr閟"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text box height"
-msgstr "al玎ria de la caixa de text"
+msgid "I can't find needed image file `%s'."
+msgstr "No he trobat el fitxer d'imatge necessari `%s'."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "text width"
-msgstr "amplada del text"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"No s'ha detectat cap targeta de so. Proveu amb \"harddrake\" despr閟 de la "
+"instal穕aci"
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"coordenada y de la caixa de text\n"
-"en nombre de car郼ters"
+"El port introdu飔 no 閟 v鄉id: %s.\n"
+"El format correcte 閟 \"port/tcp\" o \"port/udp\", \n"
+"on el port es troba entre 1 i 65535."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Shell"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome i Pr韓cipe"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-"coordenada x de la caixa de text\n"
-"en nombre de car郼ters"
+"No es pot entrar amb el nom d'usuari %s (potser la contrasenya 閟 "
+"incorrecta?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Browse"
-msgstr "Navega"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjan鑣 (llat)"
-#: ../../standalone/draksplash:1
+#
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package not installed"
+msgstr "No instal穕at"
+
+#
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Theme name"
-msgstr "Nom del tema"
+msgid "Become a MandrakeExpert"
+msgstr "Esdeveniu un MandrakeExpert"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "final resolution"
-msgstr "resoluci definitiva"
+msgid "American Samoa"
+msgstr "Samoa Americana"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "first step creation"
-msgstr "creaci del primer pas"
+msgid "Protocol"
+msgstr "Protocol"
-#: ../../standalone/draksplash:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "Copy fonts on your system"
+msgstr "Copiar les fonts en el vostre sistema"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Ajuda del Harddrake"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
msgstr ""
-"el paquet 'ImageMagick' 閟 necessari per a un correcte funcionament.\n"
-"Feu clic a \"D'acord\" per intal穕ar-lo o a \"Cancel穕a\" per sortir"
-#: ../../standalone/drakxtv:1
+#
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Configuraci del Servidor de Terminal de Mandrake"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
"\n"
-"You can visit our hardware database at:\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"No s'ha detectat cap targeta de TV en el vostre ordinador. Si us plau "
-"verifiqueu que teniu correctament inserida una targeta de V韉eo/TV "
-"compatible amb Linux.\n"
-"\n"
"\n"
-"Podeu visitar la nostra base de dades de maquinari a:\n"
+" Detalls de l'Informe del DrakBackup\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "No s'ha detectat cap targeta de TV!"
+msgid "Restore all backups"
+msgstr "Restaura totes les c騪ies de seguretat"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Ara, podeu executar xawtv (sota X Window!) !\n"
+msgid "if set to yes, check open ports."
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Tingueu un bon dia!"
+msgid "This may take a moment to erase the media."
+msgstr "Esborrar el suport pot trigar una estona."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "No teniu instal穕at XawTV!"
+msgid "You can't select/unselect this package"
+msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-#
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "S'ha produ飔 un error en cercar els canals de TV"
+msgid "Warning"
+msgstr "Advert鑞cia"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "S'estan cercant canals de TV"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Altres fitxers:\n"
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "La cerca de canals de TV est en progr閟..."
+msgid "Remote host name"
+msgstr "Nom de l'ordinador central remot"
-#: ../../standalone/drakxtv:1
+#
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Area:"
-msgstr "纑ea:"
+msgid "deactivate now"
+msgstr "Desactiva'l ara"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "TV norm:"
-msgstr "Normativa de TV:"
+msgid "access to X programs"
+msgstr "acc閟 a programes X"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Si us plau,\n"
-"entreu la vostra normativa de tv i el pa韘"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Utilitza l'espai lliure de la partici de Windows"
+#
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "TV per cable australiana Optus"
+msgid "Italy"
+msgstr "It鄉ia"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Nova Zelanda"
+msgid "Name of printer"
+msgstr "Nom de la impressora"
-#
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Fran鏰 [SECAM]"
+msgid "disable"
+msgstr "inhabilita"
-#
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Europa de l'Est"
+msgid "error unmounting %s: %s"
+msgstr "s'ha produ飔 un error en desmuntar %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Europa de l'Oest"
+msgid "Do it!"
+msgstr "Fes-ho!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Xina (difusi)"
+msgid "Cayman Islands"
+msgstr "Illes Caiman"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Jap (cable)"
+msgid "%s not responding"
+msgstr "%s no respon"
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Jap (difusi)"
+msgid "Select model manually"
+msgstr "Selecciona el model manualment"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canad (cable)"
+msgid "Format"
+msgstr "Formata"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "EUA (cable-hrc)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"La manera m閟 habitual de connectar amb ADSL 閟 pppoe.\n"
+"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
+"Si no ho sabeu, escolliu 'utilitza pppoe'"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "EUA (cable)"
+msgid "Various"
+msgstr "Diversos"
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "EUA (difusi)"
+msgid "Zip"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"No teniu instal穕at el XawTV!\n"
-"\n"
-"\n"
-"Si teniu una targeta de TV per el DrakX no l'ha detectada (no hi ha el "
-"m騞ul\n"
-"bttv o el saa7134 a \"/etc/modules\") o no heu instal穕at xawtv,\n"
-"si us plau envieu els resultats de \"lspcidrake -v -f\"\n"
-"a \"install\\@mandrakesoft.com\" amb l'assumpte \"undetected TV card\".\n"
-"\n"
-"\n"
-"El podeu instal穕ar teclejant \"urpmi xawtv\" com a root, en la consola."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
-msgstr "primari"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "secondary"
-msgstr "secundari"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
+"\n"
+"Marqueu les impressores que voleu transferir i feu clic a \n"
+"\"Transfereix\"."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Model desconegut"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Model desconegut"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#
+#: ../../keyboard.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "S'est executant \"%s\"..."
+msgid "Albanian"
+msgstr "Alban鑣"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Executa l'eina de configuraci"
+msgid "Lithuania"
+msgstr "Litu鄋ia"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Configura el m騞ul"
+msgid "Compact"
+msgstr "Compacte"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Informaci"
+msgid "Detected model: %s %s"
+msgstr "Model detectat: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Detected hardware"
-msgstr "S'ha detectat el seg黣nt maquinari"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"Aquest 閟 el HardDrake, l'eina de configuraci de maquinari de Mandrake.\n"
+"Versi:"
+
+#
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Versi del Harddrake2 "
+msgid "Local files"
+msgstr "Fitxers locals"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Detecci en proc閟"
+msgid "maybe"
+msgstr "potser"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "Panama"
+msgstr "Panam"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Aquest 閟 el HardDrake, l'eina de configuraci de maquinari de Mandrake.\n"
-"Versi:"
+"Sembla que la vostra targeta gr鄁ica t un connector TV-OUT.\n"
+"Pot configurar-se de manera que faci servir mem騬ia d'imatge.\n"
+"\n"
+"A tal efecte, heu de connectar la targeta gr鄁ica al televisor abans "
+"d'arrencar l'ordinador.\n"
+"Llavors, escolliu l'opci \"TVout\" en el carregador de l'arrencada\n"
+"\n"
+"Teniu aquesta caracter韘tica?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Quant al Harddrake"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Quant a..."
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Ara es configurar la impressi cap a un usuari de Windows amb contrasenya. "
+"Degut a una fallada en l'arquitectura del programari del client Samba la "
+"contrasenya es mostra en text clar en la l韓ia d'ordres que el client Samba "
+"utilitza per transmetre i imprimir un treball en el Servidor Windows. Per "
+"tant, 閟 possible per qualsevol usuari d'aquell ordinador de veure la "
+"contrasenya en la pantalla simplement escrivint ordres tals com \"ps auxwww"
+"\".\n"
+"\n"
+"Us recomanem que utilitzeu alguna de les seg黣nts alternatives (en tots el "
+"casos heu d'estar segur que nom閟 els ordinadors de la vostra xarxa local "
+"tenen acc閟 al vostre Servidor Windows, per exemple utilitzant un "
+"tallafoc):\n"
+"\n"
+"Utilitzeu un compte sense contrasenya en el Servidor Windows, tal com \"GUEST"
+"\" o un compte especial dedicat a la impressi. No tragueu la protecci de "
+"la contrasenya d'un compte personal o del compte de l'administrador.\n"
+"\n"
+"Configureu el vostre Servidor Windows fent que la impressora estigui "
+"disponible a trav閟 del protocol LPD. Aleshores, definiu en el Printerdrake "
+"la impressi en aquest ordinador amb el tipus de connexi \"%s\".\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Informeu d'un error"
+msgid "65 thousand colors (16 bits)"
+msgstr "65.536 colors (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
+"\n"
+"- Desa-ho en el disc dur en el cam: %s\n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "Mida: %d kB\n"
#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Seleccioneu un esc鄋er"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Remove fonts on your system"
+msgstr "Esborra fonts del sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"Warning, the network adapter (%s) is already configured.\n"
"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-"Descripci dels camps:\n"
+"Av韘: l'adaptador de xarxa (%s) ja est configurat.\n"
+"\n"
+"Voleu fer una reconfiguraci autom鄑ica?\n"
"\n"
+"Ho podeu fer manualment per heu de saber qu feu."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Ajuda del Harddrake"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Descripci"
+msgid "Graphical interface at startup"
+msgstr "Interf韈ie gr鄁ica a l'inici"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Ajuda"
+msgid "Please enter the directory to save:"
+msgstr "Si us plau, introdu飖 el directori on voleu desar-ho:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Surt"
-
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Detectada autom鄑icament"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Detectada autom鄑icament"
+#: ../../raid.pm:1
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "No hi ha prou particions per al nivell RAID %d\n"
#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Detectada autom鄑icament"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Les impressores seg黣nts estan configurades. Feu doble clic en una "
+"impressora per modificar-ne els par鄊etres, per fer-la la impressora per "
+"defecte o per veure la informaci de la impressora."
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opcions"
+msgid "Connected"
+msgstr "Connectat"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "the vendor name of the processor"
-msgstr "el nom del venedor del dispositiu"
+msgid "USB printer \\#%s"
+msgstr "Impressora USB \\/*%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "el nom del venedor del dispositiu"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Si us plau, seleccioneu el port s鑢ie a qu est connectat el ratol."
+msgid "Macedonian"
+msgstr "Macedoni"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "Bridges and system controllers"
msgstr ""
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "par鄊etre de c鄏rega"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of the processor"
-msgstr "el color de la barra de progr閟"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Fitxer/De_sa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Processor ID"
-msgstr ""
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "network printer port"
-msgstr ", impressora de xarxa \"%s\", port %s"
+msgid "No details"
+msgstr "Detalls"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "el nom del venedor del dispositiu"
+#: ../../pkgs.pm:1
+#, c-format
+msgid "very nice"
+msgstr "molt bonic"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Nom: "
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Preview"
+msgstr "Vista pr鑦ia"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "el color de la barra de progr閟"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Remote Control"
+msgstr "Control Remot"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Number of buttons"
-msgstr "Nombre de botons"
+msgid "Please select media for backup..."
+msgstr "Si us plau seleccioneu el suport per a la c騪ia..."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Official vendor name of the cpu"
-msgstr "el nom del venedor del dispositiu"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 server: %s\n"
+msgstr "Servidor XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Nom del m騞ul"
+msgid "Allow Thin Clients"
+msgstr "Afegeix/Suprimeix clients"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgi (disposici \"russa\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "/_Options"
+msgstr "/_Opcions"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "model de disc dur"
+msgid "Your printer model"
+msgstr "El model de la vostra impressora"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "tipus de dispositiu de maquinari"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(COMPTE! Esteu utilitzant XFS per la vostra partici arrel,\n"
+"la creaci d'un disquet d'arrencada amb un de 1.44 MB molt probablement "
+"fallar,\n"
+"perqu XFS necessita una unitat molt gran)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Media class"
-msgstr "Tipus de mitj"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Suprimeix el arxius tar del disc dur en acabar.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
+#
+#: ../../share/advertising/04-configuration.pl:1
#, fuzzy, c-format
-msgid "Level"
-msgstr "nivell"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Configuraci del Servidor de Terminal de Mandrake"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Save"
+msgstr "Desa"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formata"
+msgid "The %s is unsupported"
+msgstr "Aquest esc鄋er %s no 閟 suportat"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Carrega els controladors per a dispositius USB."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Halt bug"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Dan鑣"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Entreu un dispositiu URI d'impressora"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "F00f bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
+"L'鑨it de MandrakeSoft es basa en els principis del Codi Font Obert. El "
+"vostre nou sistema operatiu 閟 el resultat del treball en col穕aboraci de "
+"la Comunitat Linux de tot el m髇"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "French Guiana"
+msgstr "Guaiana Francesa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "add a rule"
+msgstr "afegeix una regla"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "Heu d'entrar un URI v鄉id!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Select user manually"
+msgstr "Seleccioneu l'usuari manualment"
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Transfer printer configuration"
+msgstr "Configuraci de la transfer鑞cia de la impressi"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Flags"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Voleu habilitar la impressi a les impressores anteriors?\n"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
+"Per tal que funcioni en un W2K PDC, segurament haureu de fer que "
+"l'administrador executi \"C:\\>net localgroup 'Acc閟 compatible amb vesions "
+"anteriors a Windows 2000' everyone /add\" i que reinici el servidor.\n"
+"Tamb necessitareu el nom d'usuari i la contrasenya de l'administrador del "
+"domini per poder connectar la m鄎uina al domini de Windows(TM).\n"
+"Si la xarxa encara no est operativa, el DrakX provar de connectar-se al "
+"domini despr閟 del pas de configuraci de la xarxa.\n"
+"Si aquesta configuraci fall閟 per algun motiu i l'autenticaci no "
+"funcion閟, executeu 'smbpasswd -j DOMINI -U USUARI%CONTRASENYA' passant com "
+"a par鄊etres el domini Windows en q黣sti i el nom d'usuari i la contrasenya "
+"de l'administrador, despr閟 que arrenqui el sistema.\n"
+"L'ordre 'wbinfo -t' comprovar si els secrets de l'autenticaci s髇 prou "
+"bons."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Port"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "el m騞ul del nucli GNU/Linux que gestiona aquest dispositiu"
+msgid "Use network connection to backup"
+msgstr "Empra la connexi de xarxa per fer la c騪ia de seguretat"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Module"
-msgstr "M騞ul"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "nou nom de dispositiu din鄊ic generat pel devfs intern del nucli"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Ha arribat el moment d'especificar quins programes voleu instal穕ar en el\n"
+"sistema. Hi ha milers de paquets en el Mandrake Linux, i no se suposa que\n"
+"els conegueu tots de mem騬ia.\n"
+"\n"
+"Si esteu fent una instal穕aci est鄋dar des del CD-ROM, primer se us "
+"demanar郳n"
+"que especifiqueu els CD que teniu (nom閟 en mode Expert). Comproveu les "
+"etiquetes\n"
+"dels CD i marqueu els quadres corresponents als CD que teniu per fer la\n"
+"instal穕aci. Cliqueu \"D'acord\" quan vulgueu continuar.\n"
+"\n"
+"Els paquets estan ordenats en grups que corresponen a un 鷖 particular de "
+"la\n"
+"m鄎uina. Els grups tamb estan ordenats en quatre seccions:\n"
+"\n"
+" * \"Estaci de treball\": si voleu utilitzar l'ordinador com a estaci de \n"
+"treball, seleccioneu un o m閟 grups dels corresponents;\n"
+"\n"
+" * \"Desenvolupament\": si la vostra m鄎uina s'ha d'utilitzar per "
+"programar,\n"
+"escolliu el(s) grup(s) desitjat(s);\n"
+"\n"
+" * \"Servidor\": si l'ordinador s'ha d'utilitzar com a servidor, ser "
+"possible\n"
+"de seleccionar els serveis m閟 habituals que voleu instal穕ar en la vostra\n"
+"m鄎uina;\n"
+"\n"
+" * \"Entorn Gr鄁ic\": finalment, aqu 閟 on escollireu quin 閟 el vostre\n"
+"entorn gr鄁ic preferit. Heu de seleccionar com a m韓im un entorn gr鄁ic si\n"
+"voleu tenir una estaci de treball gr鄁ica.\n"
+"\n"
+"Moure el cursor per sobre d'un nom de grup far que es mostri una breu "
+"explicaci骪n"
+"d'aquest grup. Si desmarqueu tots els grups quan estigueu fent una "
+"instal穕aci骪n"
+"des de zero (en contraposici a una actualitzaci), se us presentar un "
+"di鄉eg \n"
+"proposant-vos diferents opcions per a una instal穕aci m韓ima:\n"
+"\n"
+" * \"Amb X\": instal穕ar els m韓ims paquets necessaris per tenir un entorn "
+"gr鄁ic\n"
+"funcional;\n"
+"\n"
+" * \"Amb Documentaci B鄐ica\": instal穕ar el sistema base i les utilitats "
+"b鄐iques\n"
+"amb la seva documentaci. Aquesta instal穕aci 閟 adequada per configurar un "
+"sistema\n"
+"servidor;\n"
+"\n"
+" * \"Instal穕aci Realment M韓ima\": s'instal穕ar el m韓im necessari per "
+"tenir un\n"
+"sistema Linux operatiu, nom閟 amb l韓ia d'ordres. Aquesta instal穕aci "
+"ocupa\n"
+"uns 65MB.\n"
+"\n"
+"Podeu marcar la casella de \"Selecci individual de paquets\", que 閟 for鏰 "
+"鷗il si\n"
+"coneixeu els diversos paquets que s'ofereixen per instal穕ar o si voleu "
+"tenir\n"
+"control total sobre el que s'instal穕ar.\n"
+"\n"
+"Si heu comen鏰t la instal穕aci en el mode \"Actualitzaci骪", podeu "
+"desmarcar \n"
+"tots els grups si voleu evitar que s'instal穕i cap paquet nou. Aix 閟 "
+"鷗il \n"
+"per reparar o actualitzar un sistema existent."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Nou dispositiu devfs"
+msgid "Accept user"
+msgstr "Accepta l'usuari"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "nom antic de dispositiu est鄑ic, usat en el paquet de desenvolupament"
+msgid "Server"
+msgstr "Servidor"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Fitxer de dispositiu antic"
+msgid "Bad choice, try again\n"
+msgstr "Elecci incorrecta, torneu-ho a intentar\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "This field describes the device"
-msgstr "aquest camp descriu el dispositiu"
+msgid "Heard and McDonald Islands"
+msgstr "Illa Heard i Illes McDonald"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "No hi ha cap controlador alternatiu"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Canvia al mode expert"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(en aquest ordinador)"
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Nivell de seguretat"
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "L'adre鏰 de la passarel穕a ha d'estar en format 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Looking at packages already installed..."
+msgstr "S'estan cercant els paquets ja instal穕ats..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Driver"
+msgstr "Controlador"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"De vegades, el Linuxconf determinar que s'han de fer algunes tasques\n"
+"en iniciar l'ordinador per mantenir la configuraci del sistema."
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Impressora en servidor lpd remot"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
+"Abans d'instal穕ar cap font, assegureu-vos que teniu el dret a usar-les i "
+"instal穕ar-les en el vostre sistema.\n"
+"\n"
+"Podeu instal穕ar les fonts de la manera habitual. En casos estranys, fonts "
+"amb errors poden penjar el vostre servidor X."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "mida del fragment"
-
-#: ../../standalone/harddrake2:1
-#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"- dispositius PCI: d髇a la ranura PCI, el dispositiu i la funci d'aquesta "
-"targeta\n"
-"- dispositius EIDE: diu si el dispositiu 閟ta configurat com a mestre o com "
-"a esclau\n"
-"- dispositius SCSI: d髇a el bus SCSI i els identificadors SCSI del dispositiu"
+"El Yaboot 閟 un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
+"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si 閟 que els "
+"teniu\n"
+"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
+"instal穕en correctament; si no 閟 aix, per, en aquesta pantalla podeu\n"
+"afegir una entrada manualment. Aneu amb compte de triar els par鄊etres\n"
+"correctes.\n"
+"\n"
+"Les opcions principals del Yaboot s髇:\n"
+"\n"
+" * Missatge d'inicialitzaci: un senzill missatge de text que apareix abans\n"
+"de l'indicador d'arrencada.\n"
+"\n"
+" * Dispositiu d'arrencada: indica on voleu situar la informaci necess鄏ia\n"
+"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partici骪n"
+"bootstrap que contindr aquesta informaci.\n"
+"\n"
+" * Demora de l'Open Firmware: a difer鑞cia del LILO, amb el Yaboot hi ha\n"
+"dues demores disponibles. La primera d'elles es mesura en segons i, en "
+"aquest\n"
+"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
+"\n"
+" * Temps m鄕im d'arrencada del nucli: aquest temps m鄕im 閟 similar a la\n"
+"demora d'arrencada del LILO. Despr閟 de seleccionar el Linux tindreu aquest\n"
+"temps (en d鑓imes de segon) abans que se seleccioni la descripci per "
+"defecte\n"
+"del nucli.\n"
+"\n"
+" * Habilita l'arrencada des de CD: si activeu aquesta opci podreu triar\n"
+"'C' per a CD al primer indicador de l'arrencada.\n"
+"\n"
+" * Habilitar l'arrencada OF: si activeu aquesta opci podreu triar 'N' per\n"
+"Open Firmware al primer indicador de l'arrencada.\n"
+"\n"
+" * SO per defecte: podeu seleccionar amb quin SO, per defecte, s'arrencar郳n"
+"quan la demora de l'Open Firmware venci."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Ubicaci en el bus"
+msgid "No mouse"
+msgstr "Cap ratol"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- Dispositius PCI i USB: es llisten els identificadors PCI/USB del venedor, "
-"del dispositiu, del subvenedor i del subdispositiu"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "Alemanya"
-#: ../../standalone/harddrake2:1
+#
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Identificaci del bus"
+msgid "Austria"
+msgstr "纔stria"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
+"Executeu \"sndconfig\" despr閟 de la instal穕aci per configurar la targeta "
+"de so"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Redueix l'arbre"
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Canal EIDE/SCSI"
+msgid "Auto Install Configurator"
+msgstr "Configuraci de la instal穕aci autom鄑ica"
-#: ../../standalone/harddrake2:1
+#: ../../steps.pm:1
#, c-format
-msgid "Channel"
-msgstr "Canal"
+msgid "Configure networking"
+msgstr "Configura la xarxa"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "On voleu instal穕ar el carregador de l'arrencada?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"aquest 閟 el bus f韘ic al qual el dispositiu est connectat (p.ex.: PCI, "
-"USB...)"
+"El primer pas 閟 triar l'idioma que voleu.\n"
+"\n"
+"Escolliu l'idioma que vulgueu per a la instal穕aci i per al sistema.\n"
+"\n"
+"Si feu clic al bot \"Avan鏰t\" podreu seleccionar altres idiomes que "
+"vulgueu\n"
+"instal穕ar a la vostra estaci de treball. S'instal穕aran els fitxers "
+"d'idioma\n"
+"especifics de la documentaci i de les aplicacions. Per exemple, si tindreu\n"
+"usuaris anglesos a la vostra m鄎uina, podeu triar el catal com a idioma "
+"principal\n"
+"des de l'arbre i, a la secci \"Avan鏰t\", marcar la casella \"Angl鑣|Regne "
+"Unit\".\n"
+"\n"
+"Cal remarcar que es poden instal穕ar m鷏tiples idiomes. Un cop hagueu "
+"seleccionat\n"
+"tots els idiomes que vulgueu , feu clic sobre el bot \"D'acord\" per "
+"continuar.\n"
+"\n"
+"Per canviar d'un idioma a un altre, podeu executar com a root l'ordre \n"
+"\"/usr/sbin/localedrake\" per canviar l'idioma de tot el sistema, o com a "
+"simple\n"
+"usuari per canviar nom閟 l'idioma per defecte d'aquest usuari."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "El %s no 閟 compatible amb aquesta versi de Mandrake Linux."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "la llista de controladors alternatius per a aquesta targeta de so"
+msgid "DHCP client"
+msgstr "Client DHCP"
-#
-#: ../../standalone/harddrake2:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Controladors alternatius"
+msgid "Restoring from file %s failed: %s"
+msgstr "Ha fallat la restauraci des del fitxer %s: %s"
-#: ../../standalone/keyboarddrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectu un Suprimeix en la consola?"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (s鑢ie, tipus C7 antic)"
-#: ../../standalone/keyboarddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, seleccioneu la disposici del vostre teclat."
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Esteu segur que voleu habilitar la impressi en aquesta m鄎uina?\n"
-#: ../../standalone/livedrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "No es pot iniciar l'actualitzaci en directe!!!\n"
+msgid "New devfs device"
+msgstr "Nou dispositiu devfs"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Si us plau, inseriu el CD-ROM d'instal穕aci a la unitat i premeu "
-"'D'acord'.\n"
-"Si no el teniu, premeu 'Cancel穕a' per evitar l'actualitzaci en directe."
+msgid "ERROR: Cannot spawn %s."
+msgstr "S'ha produ飔 un error: no s'ha pogut engendrar %s."
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Canvieu el CD-ROM"
+msgid "Boot Style Configuration"
+msgstr "Configuraci del tipus d'arrencada"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Sincronitzaci autom鄑ica de la hora (usant NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"El canvi est fet, per perqu sigui efectiu heu de sortir de la sessi "
-"actual"
+msgid "Backup files not found at %s."
+msgstr "No s'han trobat els fitxers de c騪ia de seguretat a %s"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Save as.."
-msgstr "Anomena i desa..."
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Gr郼ies per triar Mandrake Linux 9.1"
-#
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Si us plau, entreu la vostra adre鏰 electr騨ica"
+msgid "Armenian (phonetic)"
+msgstr "Armeni (fon鑤ic)"
-#
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "Configuraci de l'av韘"
+msgid "Card model:"
+msgstr "Model de la targeta:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "Client DHCP"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Rebreu un av韘 si la c鄏rega 閟 m閟 gran que aquest valor"
+msgid "Start Server"
+msgstr "Inicia el servidor"
-#
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "load setting"
-msgstr "par鄊etre de c鄏rega"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Rebreu un av韘 si algun dels serveis seleccionats deixa de funcionar"
+msgid "All remote machines"
+msgstr "(en aquest ordinador)"
-#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "service setting"
-msgstr "par鄊etre de servei"
+msgid "Install themes"
+msgstr "Instal穕a els temes"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Servei Xinetd"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
+" actualitzacions 2002 MandrakeSoft per Stew Benedict <sbenedict"
+"\\@mandrakesoft.com>"
-#
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Servei Webmin"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Servidor SSH"
+msgid "Preparing installation"
+msgstr "S'est preparant la instal穕aci"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Servidor Samba"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Servidor de correu Postfix"
+msgid "Add User -->"
+msgstr "Afegeix un usuari -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Servidor FTP"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Sistema de resoluci de nom de domini"
+msgid "True Type fonts installation"
+msgstr "Instal穕aci de les fonts True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Servidor World Wide Web Apache"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Detecta autom鄑icament les impressores connectades directament a la xarxa "
+"local"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Benvingut a la utilitat de configuraci del correu.\n"
-"\n"
-"Aqu podreu configurar el sistema d'alerta.\n"
+msgid "LAN configuration"
+msgstr "Configuraci de la LAN"
-#
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Configuraci de l'alerta de correu"
+msgid "hard disk model"
+msgstr "model de disc dur"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Alerta de correu"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "No podeu utilitzar un volum l騡ic LVM per al punt de muntatge %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "espereu si us plau, s'est analitzant el fitxer: %s"
+msgid "Get Windows Fonts"
+msgstr "Aconsegueix les fonts de Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Contingut del fitxer"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Calendari"
+msgid "Iranian"
+msgstr "Irani"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Escolliu el fitxer"
+msgid "Croatia"
+msgstr "Cro郼ia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "but not matching"
-msgstr "per que no coincideixin amb"
+msgid "Gateway:"
+msgstr "Passarel穕a:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Afegeix un usuari"
+
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "que coincideixin amb"
+msgid "Remote printer name"
+msgstr "Nom de la impressora remota"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Settings"
-msgstr "Par鄊etres"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Eina per veure els registres"
+msgid "Device: "
+msgstr "Dispositiu: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "search"
-msgstr "cerca"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Explicaci d'Eines Mandrake"
+msgid "License agreement"
+msgstr "Acord de llic鑞cia"
#
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "System Options"
+msgstr "Opcions de sistema"
-#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Messages"
-msgstr "Missatges"
+msgid "Please enter the directory where backups are stored"
+msgstr "Si us plau, entreu el directori on es guarden les c騪ies de seguretat"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Please choose the desired security level"
+msgstr "Escolliu el nivell de seguretat desitjat"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr ", impressora USB \\/*%s"
#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "User"
-msgstr "Usuari"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Escolliu les aplicacions que suportaran les fonts:"
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Quant a.."
+msgid "Configure X"
+msgstr "Configura l'X"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opcions/Prova"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turc (tradicional, model \"F\")"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/-"
-msgstr "/Fitxer/-"
+msgid "Congratulations!"
+msgstr "Felicitats!"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fitxer/_Anomena i desa"
+msgid "Use owner id for execution"
+msgstr "Usa l'identificador del propietari (UID) per a l'execuci"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Down"
+msgstr "Baixa"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fitxer/De_sa"
+msgid "Raw printer (No driver)"
+msgstr "Impressora en cru (raw) (Cap controlador)"
-#: ../../standalone/logdrake:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "Instal穕a"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Per imprimir un fitxer des de la l韓ia d'ordres (finestra de terminal) podeu "
+"utilitzar la comanda \"%s <fitxer>\" o una eina d'impressi gr鄁ica: \"xpp "
+"<fitxer>\" o \"kprinter <fitxer>\". Les eines gr鄁iques us permeten escollir "
+"la impressora i modificar-ne els par鄊etres f郼ilment.\n"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fitxer/_Obre"
+msgid "Time remaining "
+msgstr "Temps restant "
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "UK keyboard"
+msgstr "Teclat Regne Unit"
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fitxer/_Nou"
+msgid "Unmount"
+msgstr "Desmunta"
#
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Mostrar-ho nom閟 per al dia seleccionat"
+msgid "Uninstall Fonts"
+msgstr "Desinstal穕a fonts"
-#: ../../standalone/mousedrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer bot?"
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratol."
+msgid "German (no dead keys)"
+msgstr "Alemany (sense tecles inoperatives)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Connecta"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
+msgstr "S'est transferint %s..."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Desconnecta"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32.768 colors (15 bits)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
+#: ../../any.pm:1
+#, c-format
msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-"Av韘: s'ha detectat una altra connexi a Internet, podria estar utilitzant "
-"la vostra xarxa"
+"Podeu exportar utilitzant NFS o Samba. Seleccioneu quin voleu utilitzar."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "received"
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Reboot"
+msgstr "Arrel"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Gambia"
+msgstr "G鄊bia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Mandrake Control Center"
+msgstr "Centre de Control Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "sent: "
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
+"Podeu introduir diferents ports.\n"
+"S髇 exemples v鄉ids: 139/tcp 139/udp.\n"
+"Cerqueu informaci a /etc/services"
-#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Fitxers locals"
-
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "average"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Configuraci de l'av韘"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Tape \n"
+msgstr "\t-Cinta \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Velocitat de la connexi"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remember this password"
+msgstr "Recorda aquesta contrasenya"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ara, la connexi compartida a Internet est habilitada."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Xarxa per SSH.\n"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Connecta't a Internet"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Si la impressora desitjada ha estat detectada autom鄑icament, nom閟 cal que "
+"la seleccioneu a la llista i que hi afegiu el nom d'usuari, la contrasenya i "
+"el grup de treball, si s髇 necessaris."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Connecta't a Internet"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Utilitza l'espai lliure de la partici de Windows"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "S'est comprovant la vostra connexi..."
+msgid "%s found on %s, configure it automatically?"
+msgstr "S'ha trobat %s en %s, voleu configurar-lo?"
-#: ../../standalone/net_monitor:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Logs"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Tipus de connexi: "
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "Controlador de l'XFree86: %s\n"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "S'estan enviant els fitxers..."
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
+"\n"
+" Informe del DrakBackup \n"
+"\n"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Perfil: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Configuraci de xarxa"
-
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "Choose the packages you want to install"
+msgstr "Escolliu els paquets que voleu instal穕ar"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "Papua Nova Guinea"
#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Seleccioneu un esc鄋er"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Serbi (cir韑穕ic)"
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Si us plau, introdu飖 el nom de l'ordinador o la IP."
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
+msgstr "Fes que, per defecte, no apareguin els missatges del nucli"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Voleu definir la impressora (\"%s\")\n"
+"com a impressora predeterminada?"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(en aquest ordinador)"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Elimina la selecci"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP end range"
+msgstr "L'adre鏰 final del rang del DHCP"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "s'ha detectat %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "S'est creant el disc d'arrencada..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Add host"
-msgstr "Afegeix un usuari"
+msgid "Wait please, testing your connection..."
+msgstr "S'est comprovant la vostra connexi..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Utilitza l'espai lliure"
+msgid "Bringing down the network"
+msgstr "S'est desactivant la xarxa"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(en aquest ordinador)"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "ID d'entrada"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"L'NFS 閟 un protocol popular de compartici de fitxers en xarxes TCP/IP\n"
+"Aquest servei proporciona la funcionalitat de blocatge de fitxer NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "DHCP Client"
+msgstr "Client DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Compartici de fitxers"
+msgid "dismiss"
+msgstr "deixa-ho c髍rer"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Printing/Scanning on \"%s\""
+msgstr "S'est imprimint/escanejant en \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "omit raid modules"
+msgstr "omet els m騞uls RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"L'lpd 閟 el dimoni d'impressi necessari perqu l'lpr funcioni\n"
+"correctament. B鄐icament, es tracta d'un servidor que assigna les\n"
+"tasques d'impressi a la(es) impressora(es)."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Impressores disponibles"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Compartici de fitxers"
+msgid "Internet Connection Configuration"
+msgstr "Configuraci de la connexi a Internet"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add a scanner manually"
-msgstr "Seleccioneu l'usuari manualment"
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated numbers"
+msgstr "nombres separats per coma"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Impressores disponibles"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Puja la regla actual un nivell"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
@@ -19159,368 +19236,331 @@ msgstr ""
"\n"
"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Voleu realment suprimir la impressora \"%s\"?"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"El vostre esc鄋er %s ha estat configurat.\n"
-"Ara podeu escanejar documents utilitzant \"XSane\" des de Multim鑔ia/Gr鄁ics "
-"en el men d'aplicacions."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr "No es pot trobar espai per a la instal穕aci"
#
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "escolliu un dispositiu"
+msgid "Default printer"
+msgstr "Impressora predeterminada"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Please select the device where your %s is attached"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-"Scannerdrake no ha pogut detectar el vostre esc鄋er %s.\n"
-"Si us plau seleccioneu el dispositiu al qual teniu connectat l'esc鄋er"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Impressores disponibles"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Detectada autom鄑icament"
+"Heu configurat m鷏tiples maneres de conectar-se a Internet.\n"
+"Escolliu la que voleu utilitzar.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Modifica el RAID"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Aquest esc鄋er %s s'ha de configurar amb printerdrake.\n"
-"Podeu executar printerdrake des del Centre de Control Mandrake en la secci "
-"de Maquinari."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "Aquest esc鄋er %s no 閟 suportat"
+"S'ha detectat una targeta PCI XDSI, per no es reconeix el tipus. Si us "
+"plau, seleccioneu una targeta PCI a la pantalla seg黣nt."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "El %s no 閟 compatible amb aquesta versi de Mandrake Linux."
+#: ../../any.pm:1
+#, c-format
+msgid "Add user"
+msgstr "Afegeix un usuari"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "El %s no 閟 compatible amb aquesta versi de Mandrake Linux."
+msgid "RAID-disks %s\n"
+msgstr "Discs RAID %s\n"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Port"
+#: ../../lang.pm:1
+#, c-format
+msgid "Liberia"
+msgstr "Lib鑢ia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ", "
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Model detectat: %s %s"
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose your keyboard"
+msgstr "Escolliu el vostre teclat"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid " ("
-msgstr ""
+msgid "Format partitions"
+msgstr "Formata les particions"
#
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Seleccioneu un esc鄋er"
+msgid "Automatic correction of CUPS configuration"
+msgstr "Configuraci autom鄑ica de CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s no 閟 a la base de dades de l'esc鄋er, voleu configurar-lo manualment?"
+msgid "Running \"%s\" ..."
+msgstr "S'est executant \"%s\"..."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "S'ha trobat %s en %s, voleu configurar-lo?"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "enable radio support"
+msgstr "habilita l'鷖 de la r郿io"
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Detecci en proc閟"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "S'han afegit alguns dispositius:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Compartici de fitxers"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "S'han suprimit alguns dispositius en la classe \"%s\" de maquinari:\n"
+msgid "Loopback file name: %s"
+msgstr "Nom del fitxer de loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+#
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
msgstr ""
-"L'鑨it de MandrakeSoft es basa en els principis del Codi Font Obert. El "
-"vostre nou sistema operatiu 閟 el resultat del treball en col穕aboraci de "
-"la Comunitat Linux de tot el m髇"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Benvingut al m髇 del Codi Font Obert"
+"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Gr郼ies per triar Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "No transfereixis cap impressora"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Per compartir el vostre coneixement i ajudar a construir eines per a Linux, "
-"apunteu-vos als f騬ums de discussi que trobareu a les nostres p鄃ines de la "
-"\"Comunitat\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Demora abans d'arrencar la imatge predeterminada"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Voleu saber m閟 coses de la comunitat del Codi Font Obert? Uniu-vos al m髇 "
-"del Codi Font Obert"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
+" Aquest programa 閟 programari lliure; el podeu redistribuir i/o modificar\n"
+" sota els termes de la 'GNU General Public License' publicada per\n"
+" la Free Software Foundation; tant la versi 2 com (si voleu)\n"
+" qualsevol versi posterior.\n"
+"\n"
+" Aquest programa 閟 distribueix amb l'esperan鏰 que ser 鷗il,\n"
+" per SENSE CAP GARANTIA; sense ni tant sols la garantia impl韈ita de\n"
+" MERCANTIBILITAT o CAPACITAT DE REALITZAR UN DETERMINAT PROP襍IT. Mireu la\n"
+" 'GNU General Public License' per a m閟 detalls.\n"
+"\n"
+" Haur韊u d'haver rebut una c騪ia de la 'GNU General Public License'\n"
+" amb el programa; si no 閟 aix, escriviu a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../share/advertising/03-software.pl:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 us permet utilitzar el programari m閟 actual per "
-"reproduir fitxers d'鄒dio, editar i organitzar les vostres imatges i fotos, "
-"i reproduir v韉eos"
+msgid "Please check for multisession CD"
+msgstr "Marqueu aquesta opci si voleu un CD multisessi"
-#: ../../share/advertising/03-software.pl:1
+#
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "user"
+msgstr "usuari"
-#: ../../share/advertising/03-software.pl:1
+#
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Use Hard Disk to backup"
+msgstr "Usa el disc dur per fer la c騪ia de seguretat"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Configure"
+msgstr "Configura"
#
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Configuraci del Servidor de Terminal de Mandrake"
-
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1 us proporciona onze interf韈ies d'usuari totalment "
-"modificables: KDE 3, Gnome 2, WindowMaker..."
-
-#: ../../share/advertising/05-desktop.pl:1
-#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "Seleccioneu un esc鄋er"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
+"Av韘: s'ha detectat una altra connexi a Internet, podria estar utilitzant "
+"la vostra xarxa"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 閟 l'鷏tim en plataformes de desenvolupament"
+msgid "Backup Users"
+msgstr "C騪ia de seguretat dels usuaris"
-#: ../../share/advertising/07-server.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Transformeu el vostre ordinador en un potent servidor Linux amb nom閟 uns "
-"quants clics del ratol: servidor Web, correu electr騨ic, tallafoc, "
-"encaminador, servidor de fitxers i d'impressi..."
+"Si us plau, introdu飖 el nom del vostre ordinador central.\n"
+"Aquest nom ha de ser complet, com ara \"mybox.mylab.myco.com\".\n"
+"Tamb podeu introduir l'adre鏰 IP de la passarel穕a, si en teniu una."
-#: ../../share/advertising/07-server.pl:1
+#
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Convertiu la vostra m鄎uina en un servidor fiable"
+msgid "Select Printer Spooler"
+msgstr "Seleccioneu la cua d'impressi"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Trobareu tot el conjunt de solucions Linux, aix com ofertes especials en "
-"productes i altres avantatges, a la nostra botiga en l韓ia:"
+msgid "Create new theme"
+msgstr "Crea un nou tema"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "La botiga oficial de MandrakeSoft"
+msgid "Mandrake Tools Explanation"
+msgstr "Explicaci d'Eines Mandrake"
-#: ../../share/advertising/09-mdksecure.pl:1
+#
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
-"MandrakeSoft treballa al costat d'un conjunt d'empreses que ofereixen "
-"solucions professionals compatibles amb el Mandrake Linux. Trobareu una "
-"llista d'aquests socis al MandrakeStore"
+msgid "No image found"
+msgstr "No s'ha trobat cap impressora!"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Alguns paquets importants no s'han instal穕at correctament.\n"
+"La vostra unitat de CD-ROM, o b el CD-ROM, s髇 defectuosos.\n"
+"Comproveu el CD-ROM en un ordinador instal穕at mitjan鏰nt \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Model detectat: %s %s"
+
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimitzeu la vostra seguretat"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Aquest producte es troba disponible al lloc web de MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Azerbaitjan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "No s'ha trobat cap cinta a %s"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (Estats Units)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Uniu-vos als grups de suport de MandrakeSoft i a la Comunitat Linux en l韓ia "
-"per compartir els vostres coneixements i ajudar els altres esdevenint un "
-"expert reconegut al lloc web de suport t鑓nic en l韓ia:"
+"aquest 閟 el bus f韘ic al qual el dispositiu est connectat (p.ex.: PCI, "
+"USB...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Cerqueu les solucions als vostres problemes a trav閟 de la nostra plataforma "
-"de suport en l韓ia"
+msgid "How is the printer connected?"
+msgstr "Com est connectada la impressora?"
#
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Esdeveniu un MandrakeExpert"
+msgid "Security level"
+msgstr "Nivell de seguretat"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Cada incident ser investigat per un expert t鑓nic qualificat de "
-"MandrakeSoft."
+msgid "final resolution"
+msgstr "resoluci definitiva"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Una plataforma en l韓ia per respondre a les necessitats de suport especials "
-"de les empreses"
+msgid "Services"
+msgstr "Serveis"
-#
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Grup corporatiu MandrakeExpert"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19535,10 +19575,6 @@ msgstr ""
"c鄉cul (kspread, gnumeric), visualitzadors pdf, etc."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estaci de treball"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Estaci de jocs"
@@ -19612,10 +19648,6 @@ msgstr ""
"eines"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorn gr鄁ic"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Estaci de treball GNOME"
@@ -19636,10 +19668,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers include"
@@ -19712,40 +19740,105 @@ msgstr "Servidor NFS, Servidor SMB, Servidor Proxy, Servidor SSH"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Estaci multim鑔ia"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Conjunt d'eines per llegir i enviar correu i not韈ies (pine, mutt, tin...) i "
+"per navegar pel Web"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Connexi i configuraci d'Internet"
+
+#
+#~ msgid "Configure the connection"
+#~ msgstr "Configura la connexi"
+
+#~ msgid "Disconnect"
+#~ msgstr "Desconnecta"
+
+#~ msgid "Connect"
+#~ msgstr "Connecta"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Podeu tornar a configurar la connexi."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Podeu connectar-vos a Internet o tornar a configurar la connexi."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Ara mateix no esteu connectat a Internet."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Podeu desconnectar-vos o tornar a configurar la connexi."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Ara mateix esteu connectat a Internet."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "fitxers que s'estan enviant per FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr ""
+#~ "Usa la c騪ia de seguretat incremental (no reemplacis les c騪ies antigues)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Torna a executar 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Fes que initrd sigui 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Escriu %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "S'est copiant %s a %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Fes una c騪ia de seguretat de %s en %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "convesi de fonts ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Conversi de fonts"
+
+#~ msgid "Author:"
+#~ msgstr "Autor:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Programes de reproducci/edici de so i v韉eo"
+#~ msgid "Audio station"
+#~ msgstr "Estaci multim鑔ia"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Estaci de jocs"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programes de reproducci/edici de so i v韉eo"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Programes de reproducci/edici de so i v韉eo"
+#~ msgid "Video station"
+#~ msgstr "Estaci de jocs"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Estaci de jocs"
+#~ msgid "Video playing programs"
+#~ msgstr "Programes de reproducci/edici de so i v韉eo"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Programes gr鄁ics com El Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Estaci de jocs"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i not韈ies (pine, mutt, tin...) i "
-"per navegar pel Web"
+#~ msgid "Graphics programs"
+#~ msgstr "Programes gr鄁ics com El Gimp"
#, fuzzy
#~ msgid "Printer sharing"
@@ -19968,12 +20061,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -20330,10 +20421,6 @@ msgstr ""
#~ "necessiteu el /boot"
#
-#~ msgid "Upgrade"
-#~ msgstr "Actualitza"
-
-#
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Voleu configurar una altra impressora?"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
index 279f901c1..9f66dc008 100644
--- a/perl-install/share/po/cs.po
+++ b/perl-install/share/po/cs.po
@@ -8,7 +8,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-cs\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-13 11:16GMT+0100\n"
"Last-Translator: Radek Vyb铆ral <Radek.Vybiral@vsb.cz>\n"
"Language-Team: Czech <cs@li.org>\n"
@@ -17,988 +17,1900 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Hled谩m odd铆ly, kter茅 lze p艡ipojit"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"pokud je nastaveno, kontroluje p艡id谩v谩n铆/odeb铆r谩n铆 soubor暖 se suid root."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port s铆钮ov茅 tisk谩rny"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Pros铆m vlo啪te disketu:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Sd铆len铆 mezi u啪ivateli pou啪铆v谩 skupinu \"fileshare\". \n"
-"U啪ivatele lze do t茅to skupiny p艡idat pomoc铆 n谩stroje UserDrake."
+"Z谩lo啪n铆 tabulka odd铆l暖 nem谩 stejnou velikost\n"
+"Chcete p艡esto chcete pokra膷ovat?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Zru拧it"
+msgid "Which username"
+msgstr "Kter茅 u啪ivatelsk茅 jm茅no"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Spustit UserDrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Jak媒 typ z谩znamu chcete p艡idat?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Obnovit tabulku odd铆l暖"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Na serveru CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Prob铆h谩 nastavov谩n铆 po instalaci"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "M铆sto toho pou啪ijte ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Zm臎nit typ"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Chcete povolit u啪ivatel暖m, aby si mohli sd铆let adres谩艡e ve sv茅m domovsk茅m "
-"adres谩艡i?\n"
-"Pokud to povol铆te, u啪ivatel暖m sta膷铆 pouze klepnout na \"Sd铆let\" v "
-"aplikac铆ch Konqueror a Nautilus.\n"
"\n"
-"Lze tak茅 prov茅st \"Vlastn铆\" povolen铆 pro jednotliv茅 u啪ivatele.\n"
+"Tak茅 tisk谩rny pou啪铆vaj铆c铆 PPD soubory od jejich v媒robc暖 nebo tisk谩rny s "
+"nativn铆mi ovlada膷i pro CUPS nelze p艡en茅st."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Chyb铆 pot艡ebn媒 bal铆膷ek %s"
+msgid "Sri Lanka"
+msgstr "Sr铆 Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Nyn铆 lze prov茅st export p艡es protokol NFS nebo Samba. Vyberte pros铆m, kter媒 "
-"chcete pou啪铆t."
+"N谩sleduj铆c铆 tisk谩rny\n"
+"\n"
+"%s %s\n"
+"jsou p艡铆mo p艡ipojeny k va拧emu po膷铆ta膷i"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Bal铆膷ek %s mus铆 b媒t nainstalov谩n. Chcete ho nainstalovat?"
+msgid "Central African Republic"
+msgstr "Centr谩ln铆 africk谩 republika"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Vlastn铆"
+msgid "Gateway device"
+msgstr "Za艡铆zen铆 br谩ny (gateway)"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Povolit v拧em u啪ivatel暖m"
+msgid "Net Method:"
+msgstr "S铆钮ov谩 metoda:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Nesd铆let"
+msgid "Ethernetcard"
+msgstr "Ethernetov谩 karta"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "V铆ce"
+msgid "Parameters"
+msgstr "Parametry"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Zde je kompletn铆 seznam dostupn媒ch zem铆"
+msgid "Auto-detect"
+msgstr "Autodetekce"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Vyberte si pros铆m svoji zem."
+msgid "Interface:"
+msgstr "Rozhran铆:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Volba typu instalace"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Zem臎"
+msgid "on CDROM"
+msgstr "na CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "V拧echny jazyky"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Nepoda艡ilo se p艡ipojit k Internetu.\n"
+"Pokuste se p艡ekonfigurovat dan茅 p艡ipojen铆."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Pou啪铆t Unicode jako v媒choz铆"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"P艡ipojit tisk谩rnu k Linux serveru a nechat po膷铆ta膷(e) s Windows pracovat "
+"jako klienty.\n"
+"\n"
+"Chcete opravdu pokra膷ovat v nastaven铆 tisk谩rny t铆mto zp暖sobem?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "B臎lorusko"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Chyba p艡i zapisov谩n铆 do souboru %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux podporuje v铆ce jazyk暖. M暖啪ete si zvolit dal拧铆 jazyky,\n"
-"kter茅 budou dostupn茅 po instalaci a n谩sledn茅m restartu syst茅mu."
+"apmd je pou啪铆v谩n pro sledov谩n铆 stavu baterie a zaznamen谩v谩n铆 p艡es syslog.\n"
+"M暖啪e tak茅 b媒t pou啪it pro vypnut铆 po膷铆ta膷e p艡i vybit茅 baterii."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Pros铆m zvolte si jazyk, kter媒 chcete pou啪铆vat."
+msgid "Use tape to backup"
+msgstr "Pou啪铆t p谩skovou jednotku"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, kter媒 spr谩vce oken m谩 b媒t spou拧t臎n:"
+msgid "The following packages are going to be installed"
+msgstr "Tyto bal铆膷ky budou instalov谩ny"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Zvolte standardn铆ho u啪ivatele:"
+msgid "CUPS configuration"
+msgstr "Nastaven铆 CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Chcete pou啪铆t tuto vlastnost?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nen铆 dostatek m铆sta pro vytvo艡en铆 nov茅ho diskov茅ho odd铆lu"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "P艡esouv谩m"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"M暖啪u nastavit v谩拧 po膷铆ta膷 tak, aby automaticky p艡ihl谩sil vybran茅ho u啪ivatele."
+"\n"
+"Aktivity programu DrakBackup skrze %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Automatick茅 p艡ihl谩拧en铆"
+msgid "("
+msgstr "("
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Icon"
-msgstr "Ikona"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"V铆t谩 v谩s pr暖vodce p艡ipojen铆m k s铆ti\n"
+"\n"
+"Nyn铆 lze nastavit p艡ipojen铆 k s铆ti nebo internetu.\n"
+"Pokud nechcete pou啪铆t automatickou detekci, odzna膷te pol铆膷ko.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Heslo (podruh茅)"
+msgid "Lebanon"
+msgstr "Libanon"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Password"
-msgstr "Heslo"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "User name"
-msgstr "U啪ivatelsk茅 jm茅no"
+msgid "Stop"
+msgstr "Stop"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "Skute膷n茅 jm茅no"
+msgid "Edit selected host"
+msgstr "Upravit vybran媒 po膷铆ta膷"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Accept user"
-msgstr "Vytvo艡it u啪ivatele"
+msgid "No CD device defined!"
+msgstr "Nen铆 definov谩no 啪谩dn茅 za艡铆zen铆 CD!"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Done"
-msgstr "Hotovo"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulharsk茅 (foneticky)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "Po膷谩tek p谩sma adres DHCP"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Z谩kladn铆 nastaven铆 zav谩d臎c铆ho programu"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Zadejte u啪ivatele\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "P艡idat u啪ivatele"
+msgid "Tape"
+msgstr "P谩ska"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Toto u啪ivatelsk茅 jm茅no u啪 bylo p艡id谩no"
+msgid "Scanning network..."
+msgstr "Zkoum谩m s铆钮...."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Toto u啪ivatelsk茅 jm茅no je p艡铆li拧 dlouh茅"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr "Tato volba dovol铆 obnovit r暖zn茅 verze adres谩艡e /etc."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U啪ivatelsk茅 jm茅no m暖啪e obsahovat pouze mal谩 p铆smena, 膷铆sla, '-' a '_'"
+msgid "Malaysia"
+msgstr "Malajsie"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Pros铆m zadejte u啪ivatelsk茅 jm茅no"
+msgid "Swiss (French layout)"
+msgstr "艩v媒carsk茅 (Francouzsk媒 styl)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Toto heslo je p艡铆li拧 jednoduch茅"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid neusp臎l (mo啪n谩, 啪e chyb铆 raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Webov谩 kamera"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Velikost cache (druh谩 煤rove艌) na cpu"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "Zvukov谩 karta"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Pro vyti拧t臎n铆 souboru z p艡铆kazov茅 艡谩dky (v termin谩lov茅m okn臎) pou啪ijte "
+"p艡铆kaz \"%s <soubor>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Zkuste to znovu, pros铆m"
+msgid "Level %s\n"
+msgstr "脷rove艌 %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodn谩"
+msgid "Luxembourg"
+msgstr "Lucembursko"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(u啪 byl p艡id谩n %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" Report d茅monu pro DrackBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "p艡铆stup k n谩stroj暖m pro kompilaci"
+msgid "Iran"
+msgstr "脥r谩n"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "p艡铆stup k s铆钮ov媒m n谩stroj暖m"
+msgid "Bus"
+msgstr "Sb臎rnice"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "p艡铆stup k administrativn铆m soubor暖m"
+msgid "Iraq"
+msgstr "Ir谩k"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "povolit \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Na拧el jsem mo啪n媒 konflikt v sou膷asn茅m nastaven铆 LAN adresy pro %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "p艡铆stup k rpm n谩stroj暖m"
+msgid "Configuring..."
+msgstr "Nastavuji..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "p艡铆stup k program暖m v X prost艡ed铆"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Nastaven铆 ji啪 bylo provedeno, nyn铆 je povoleno."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Tady jsou v拧echny z谩znamy.\n"
-"M暖啪ete p艡idat dal拧铆 nebo zm臎nit st谩vaj铆c铆."
+"Modul bttv j谩dra opera膷n铆ho syst茅mu GNU/Linux nalezne spr谩vn茅 parametry "
+"automaticky pro v臎t拧inu modern铆ch TV karet.\n"
+"Je-li va拧e karta 拧patn臎 detekov谩na, lze nastavit spr谩vn媒 typ karty a tuneru "
+"ru膷n臎 zde. Pokud je to pot艡eba, vyberte tak茅 parametry va拧铆 TV karty."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Jin媒 syst茅m (Windows...)"
+msgid "Password (again)"
+msgstr "Heslo (podruh茅)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Jin媒 syst茅m (MacOs...)"
+msgid "Search installed fonts"
+msgstr "Hled谩m instalovan茅 fonty"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Jin媒 syst茅m (SunOs...)"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP adresa"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Jak媒 typ z谩znamu chcete p艡idat?"
+msgid "Choose the sizes"
+msgstr "Zvolte velikosti"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Tato zna膷ka se ji啪 pou啪铆v谩"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Seznam po拧kozen媒ch dat:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Mus铆te zadat ko艡enov媒 odd铆l"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"V谩拧 modem nen铆 syst茅mem podporov谩n.\n"
+"Pod铆vejte se na str谩nky http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Mus铆te zadat soubor s j谩drem"
+msgid "Choose another partition"
+msgstr "Vyberte jin媒 odd铆l"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Pr谩zdn谩 zna膷ka nen铆 povolena"
+msgid "Current user"
+msgstr "Aktu谩ln铆 u啪ivatel"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "V媒choz铆"
+msgid "Username"
+msgstr "U啪ivatelsk茅 jm茅no"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "Bez Videa"
+msgid "Left \"Windows\" key"
+msgstr "Lev谩 kl谩vesa \"Windows\""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
+msgid "dhcpd Server Configuration"
+msgstr "Nastaven铆 serveru dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "P艡ipojit"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Pou啪ito pro adres谩艡:\n"
+" pouze vlastn铆k adres谩艡e nebo souboru v tomto adres谩艡i jej m暖啪e smazat"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "Zna膷ka"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Nejist媒"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " na serveru Novell \"%s\", tisk谩rna \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Tabulka"
+msgid "Remove a module"
+msgstr "Odebrat modul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Root"
-msgstr "Ko艡enov媒(root)"
+msgid "Password"
+msgstr "Heslo"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Pro 膷ten铆 i z谩pis"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumenty: (max, inactive=-1)\n"
+"\n"
+"Nastav铆 dobu platnosti hesla na \\fImax\\fP dn暖 a prodlevu mezi zm臎nami na "
+"\\fIinactive\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "Roz拧铆艡en谩 konfigurace"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Video mode"
-msgstr "Textov媒 re啪im"
+msgid "Scanning on your HP multi-function device"
+msgstr "Vyhled谩v谩m multifunk膷n铆 za艡铆zen铆 od HP"
#: ../../any.pm:1
#, c-format
-msgid "Image"
-msgstr "Obraz(image)"
+msgid "Root"
+msgstr "Ko艡enov媒(root)"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "V媒choz铆 OS?"
+msgid "Choose an existing RAID to add to"
+msgstr "Zvolte existuj铆c铆 RAID pro p艡id谩n铆"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Povolit zavad臎膷 OF?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Tureck茅 (modern铆 model \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Povolit spu拧t臎n铆 z CD?"
+msgid "Lilo message not found"
+msgstr "Zpr谩va LiLo nebyla nalezena"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva p艡i spu拧t臎n铆"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automatick谩 generace hlavi膷ky j谩dra v adres谩艡i /boot\n"
+"pro soubory /usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
+msgid "if needed"
+msgstr "pokud je pot艡eba"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot device"
-msgstr "Startovac铆 za艡铆zen铆"
+msgid "Restore Failed..."
+msgstr "Obnova selhala..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Init Message"
-msgstr "脷vodn铆 zpr谩va"
+msgid "/Autodetect _jazz drives"
+msgstr "/Automaticky detekovat _jazz disky"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Zav谩d臎c铆 program"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Popis:\n"
+"\n"
+" DrakBackup je n谩stroj na z谩lohov谩n铆 syst茅mu.\n"
+" B臎hem konfigurace m暖啪ete vybrat: \n"
+"\t- Syst茅mov茅 soubory,\n"
+"\t- Soubory u啪ivatel暖,\n"
+"\t- Ostatn铆 soubory.\n"
+"\tnebo Cel媒 syst茅m a jin茅 (jako jsou odd铆ly s Windows).\n"
+"\n"
+" DrakBackup dovoluje z谩lohovat na:\n"
+"\t- Pevn媒 disk.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (se spu拧t臎n铆m, z谩chranou a autoinstalac铆).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- WebDAV.\n"
+"\t- P谩skovou jednotku.\n"
+"\n"
+" DrakBackup dovoluje prov茅st obnovu do vybran茅ho adres谩艡e.\n"
+"\n"
+" Jako v媒choz铆 jsou um铆st臎ny v拧echny z谩lohy do adres谩艡e\n"
+" /var/lib/drakbackup \n"
+"\n"
+" Konfigura膷n铆 soubor:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Postup p艡i obnov臎:\n"
+"\n"
+" P艡i prov谩d臎n铆 obnovy odstran铆 DrakBackup p暖vodn铆 adres谩艡\n"
+" a ov臎艡铆, 啪e z谩lohovan茅 soubory nejsou po拧kozeny.\n"
+" Doporu膷uje se ale prov茅st z谩lohu t臎chto dat p艡ed proveden铆m\n"
+" obnovy.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Z谩kladn铆 nastaven铆 zav谩d臎c铆ho programu"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"脷vod\n"
+"\n"
+"Opera膷n铆 syst茅m a r暖zn茅 膷谩sti dostupn茅 v distribuci Mandrake Linux jsou "
+"naz媒v谩ny \"Softwarov茅 produkty\" (\"Software Products\"). Softwarov茅 "
+"produkty zahrnuj铆, ale nejsou omezeny, na programy, metody, pravidla a "
+"dokumentaci, vztahuj铆c铆 se k opera膷n铆mu syst茅mu a dal拧铆m komponent谩m "
+"distribuce Mandrake Linux.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-"Volba ''Omezen铆 nastaven铆 z p艡铆kazov茅 艡谩dky'' je bezp艡edm臎tn茅 bez hesla"
+"um铆st臎n铆 x sou艡adnice pro\n"
+"lev媒 horn铆 roh li拧ty s pr暖b臎hem"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost pam臎ti v MB"
+msgid "Current interface configuration"
+msgstr "Aktu谩ln铆 nastaven铆 rozhran铆"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Povolit v铆ce profil暖"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - D茅mon pro tisk谩rny"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je t艡eba, up艡esn臎te velikost pam臎ti (nalezeno %d MB)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Jestli m谩te ISA kartu, m臎ly by b媒t hodnoty na n谩sleduj铆c铆 obrazovce "
+"spr谩vn茅.\n"
+"\n"
+"Jestli m谩te PCMCIA kartu, mus铆te zn谩t jej铆 IRQ a IO.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Vy膷istit /tmp p艡i ka啪d茅m startu"
+msgid "Do not print any test page"
+msgstr "Netisknout testovac铆 str谩nku"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Startovac铆 disketa"
+msgid "Gurmukhi"
+msgstr "Gurmutsk茅"
#: ../../any.pm:1
#, c-format
-msgid "restrict"
-msgstr "omezen铆"
+msgid "Force No APIC"
+msgstr "Vnutit No APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Omezen铆 nastaven铆 z p艡铆kazov茅 艡谩dky"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Toto heslo je p艡铆li拧 jednoduch茅 (mus铆 b媒t alespo艌 %d znak暖 dlouh茅)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Force No APIC"
-msgstr "Vnutit No APIC"
+msgid "[keyboard]"
+msgstr "[kl谩vesnice]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Povolit ACPI"
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Prodleva p艡ed automatick媒m spu拧t臎n铆m"
+msgid "Install List"
+msgstr "Instalovat seznam"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "compact"
-msgstr "kompaktn铆"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Zm臎nit adres谩艡\n"
+"pro obnovu"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "Kompaktn铆"
+msgid "Show only for the selected day"
+msgstr "Zobrazit pouze pro vybran媒 den"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instalace zav谩d臎c铆ho programu"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"P艡ehled drakTermServ\n"
+"\t\t\t \n"
+" - Vytv谩艡铆 zav谩d臎c铆 obrazy pro Etherboot:\n"
+" \t\tChcete-li zav茅st j谩dro skrz etherboot, mus铆te vytvo艡it zvl谩拧tn铆 "
+"kombinaci j谩dra a initrd.\n"
+" \t\tV臎t拧inu pr谩ce za v谩s ud臎l谩 mkinitrd-net a drakTermServ je pouze "
+"grafick茅 rozhran铆\n"
+" \t\tpro pomoc se spr谩vou 膷i p艡izp暖soben铆m t臎chto obraz暖.\n"
+"\n"
+" - Udr啪uje /etc/dhcpd.conf:\n"
+" \t\tKa啪d媒 ze s铆钮ov臎 zav谩d臎n媒ch klient暖 pot艡ebuje z谩znam v dhcpd."
+"conf, kter媒 mu p艡i艡ad铆 IP adresu\n"
+" \t\ta s铆钮ov媒 zav谩d臎c铆 obraz pro dan媒 po膷铆ta膷. drakTermServ umo啪n铆 "
+"tvorbu nebo odstran臎n铆 t臎chto z谩znam暖.\n"
+"\t\t\t\n"
+" \t\t(U PCI karet lze vynechat obraz - etherboot si vy啪谩d谩 spr谩vn媒 "
+"obraz. M臎li byste\n"
+" \t\ttak茅 vz铆t v 煤vahu, 啪e kdy啪 hled谩 etherboot obrazy, o膷ek谩v谩 n谩zvy "
+"jako\n"
+" \t\tboot-3c59x.nbi, a ne boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tTypick媒 soubor dhcpd.conf podporuj铆c铆 bezdiskov茅 klienty vypad谩 "
+"jako:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tI kdy啪 m暖啪ete pou啪铆t rozsah IP adres m铆sto nastaven铆 specifick茅ho "
+"z谩znamu pro\n"
+"\t\t\tpo膷铆ta膷 klienta, pou啪it铆 pevn茅 adresy v谩m umo啪n铆 zadat funkcionalitu\n"
+"\t\t\tdo soubor暖 s nastaven铆m pro specifick茅ho klienta, kter茅 poskytuje "
+"ClusterNFS.\n"
+"\t\t\t\n"
+"\t\t\tPozn谩mka: Polo啪ku \"#type\" pou啪铆v谩 pouze drakTermServ. Klienti mohou "
+"b媒t bu膹 \"thin\"\n"
+"\t\t\tnebo \"fat\". Tenc铆 klienti provozuj铆 v臎t拧inu software na serveru "
+"pomoc铆 xdmcp, tlust铆 klienti provozuj铆 v臎t拧inu\n"
+"\t\t\tsoftware na klientsk茅m po膷铆ta膷i. Zvl谩拧tn铆 inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$, je\n"
+"\t\t\tvytvo艡en pro tenk茅ho klienty. Syst茅mov茅 soubory s nastaven铆m xdm-"
+"config, kdmrc a gdm.conf jsou upraveny\n"
+"\t\t\tp艡i pou啪it铆 tenk媒ch klient暖 tak, aby povolovaly xdmcp. Jeliko啪 p艡i "
+"pou啪it铆 xdmcp vznikaj铆 bezpe膷nostn铆 rizika,\n"
+"\t\t\tjsou upraveny soubory hosts.deny a hosts.allow tak, aby omezily "
+"p艡铆stup pouze z lok谩ln铆 s铆t臎.\n"
+"\t\t\t\n"
+"\t\t\tPozn谩mka: Po p艡id谩n铆 nebo odebr谩n铆 klient暖 mus铆te zastavit a znovu "
+"spustit server.\n"
+"\t\t\t\n"
+" - Udr啪uje /etc/exports:\n"
+" \t\tClusterNFS dovoluje exportovat ko艡enov媒 souborov媒 syst茅m na "
+"bezdiskov茅 klienty. drakTermServ\n"
+" \t\tnastav铆 odpov铆daj铆c铆 z谩znam tak, aby umo啪nil anonymn铆 p艡铆stup ke "
+"ko艡enov茅mu souborov茅mu syst茅mu\n"
+" \t\tbezdiskov媒m klient暖m.\n"
+"\n"
+" \t\tTypick媒 z谩znam pro export ClusterNFS vypad谩:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tSe SUBNET/MASK odpov铆daj铆c铆 va拧铆 s铆ti.\n"
+" \t\t\n"
+" - Udr啪uje /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tAby se mohli u啪ivatel茅 p艡ihl谩sit do syst茅mu z bezdiskov媒ch "
+"stanic, mus铆 b媒t duplikov谩n\n"
+" \t\tjejich z谩znam z /etc/shadow v /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ v tomto ohledu\n"
+" \t\tpom谩h谩 p艡id谩n铆m nebo odebr谩n铆m u啪ivatel暖 syst茅mu z tohoto "
+"souboru.\n"
+"\n"
+" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ pro ka啪d茅ho klienta:\n"
+" \t\tSkrze ClusterNFS m暖啪e m铆t ka啪d媒 bezdiskov媒 klient sv茅 vlastn铆 "
+"unik谩tn铆 soubory s nastaven铆m\n"
+" \t\tum铆st臎n茅 na serveru v ko艡enov茅m souborov茅m syst茅mu. drakTermServ "
+"bude v budoucnu pom谩hat\n"
+" \t\ts tvorbou t臎chto soubor暖.\n"
+"\n"
+" - Soubory s nastaven铆m syst茅mu pro ka啪d茅ho klienta:\n"
+" \t\tSkrze ClusterNFS m暖啪e m铆t ka啪d媒 bezdiskov媒 klient sv茅 vlastn铆 "
+"unik谩tn铆 soubory s nastaven铆m\n"
+" \t\tum铆st臎n茅 na serveru v ko艡enov茅m souborov茅m syst茅mu. drakTermServ "
+"bude v budoucnu pom谩hat\n"
+" \t\ts tvorbou t臎chto soubor暖,\n"
+" \t\tnap艡. /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard zvl谩拧钮 pro\n"
+" \t\tka啪d茅ho klienta.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ nastav铆 tento soubor tak, aby pracoval v souladu s "
+"obrazy vytvo艡en媒mi pomoc铆\n"
+" \t\tmkinitrd-net a z谩znamy v /etc/dhcpd.conf tak, aby byl ka啪d茅mu "
+"bezdiskov茅mu klientu poskytnut\n"
+" \t\todpov铆daj铆c铆 zav谩d臎c铆 obraz.\n"
+"\n"
+" \t\tTypick媒 soubor s nastaven铆m tftp vypad谩 takto:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tZm臎ny oproti v媒choz铆 instalaci zahrnuj铆 zm臎nu p艡铆znaku disable "
+"na\n"
+" \t\t'no' a zm臎nu cesty adres谩艡e na /var/lib/tftpboot, kam ukl谩d谩\n"
+" \t\tmkinitrd-net sv茅 obrazy.\n"
+"\n"
+" - Vytv谩艡铆 diskety a CD etherboot:\n"
+" \t\tBezdiskov茅 klientsk茅 po膷铆ta膷e pot艡ebuj铆 bu膹 obrazy ROM na NIC, "
+"nebo zav谩d臎c铆 disketu\n"
+" \t\tnebo CD, aby mohly spustit zav谩d臎c铆 sekvenci. drakTermServ "
+"pom暖啪e tyto zav谩d臎c铆 obrazy generovat,\n"
+" \t\tv z谩vislosti na NIC na klientsk茅m stroji.\n"
+" \t\t\n"
+" \t\tZ谩kladn铆 p艡铆klad ru膷n铆ho vytvo艡en铆 zav谩d臎c铆ho obrazu diskety pro "
+"kartu 3Com 3c509:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Prvn铆 sektor zav谩d臎c铆ho diskov茅ho odd铆lu"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Prvn铆 sektor disku (MBR)"
+msgid "Logs"
+msgstr "Logy"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zav谩d臎c铆 program?"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Pozn: Paraleln铆 porty nepou啪铆vaj铆 autodetekci)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "Instalace SILO"
+msgid "What kind of card do you have?"
+msgstr "Jak媒 typ karty m谩te?"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "P艡esko膷it"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Na disketu"
+msgid "Security"
+msgstr "Bezpe膷nost"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Prvn铆 sektor ko艡enov茅ho odd铆lu"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Lze tak茅 pou啪铆t grafick茅 rozhran铆 \"xpdq\" pro nastaven铆 mo啪nost铆 a ke "
+"spr谩v臎 tiskov媒ch 煤loh.\n"
+"Pokud pou啪铆v谩te grafick茅 prost艡ed铆 KDE, m谩te na pracovn铆 plo拧e ikonu "
+"pojmenovanou \"STOP Printer!\", kter媒 po klepnut铆 ihned zastav铆 v拧echny "
+"tiskov茅 煤lohy. To je vhodn茅 t艡eba pro p艡铆pady uv铆znut铆 pap铆ru.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>K"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown"
+msgstr "Nezn谩m媒"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Tento server je ji啪 na seznamu, nelze jej tedy op臎t p艡idat.\n"
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Nastaven铆 s铆t臎"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>U"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Rozhodli jste se nainstalovat zavad臎膷 syst茅mu na odd铆l.\n"
-"To znamen谩, 啪e ji啪 zavad臎膷 na disku, ze kter茅ho spou拧t铆te syst茅m n臎jak媒 je "
-"(nap艡. System Commander).\n"
-"\n"
-"Ze kter茅ho disku spou拧t铆te syst茅m?"
+"Protokol pou啪it媒 ve zbytku sv臎ta \n"
+" 啪谩dn媒 D-kan谩l (leased lines)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Vytv谩艡铆m startovac铆 disketu"
+msgid "Option %s must be a number!"
+msgstr "Hodnota %s mus铆 b媒t 膷铆slo!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Vlo啪te disketu do %s"
+msgid "Notice"
+msgstr "Pozn谩mka"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvolte mechaniku, kde chcete vytvo艡it startovac铆 disketu"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" Povol铆/Zak谩啪e prov谩d臎n铆 denn铆ch bezpe膷nostn铆ch kontrol."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "druh茅 mechaniky"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povol铆/zak谩啪e p艡铆kaz crontab a at pro u啪ivatele. Vyjmenovan铆 u啪ivatel茅 se\n"
+"zap铆拧ou do /etc/cron.allow a /etc/at.allow\n"
+"(v铆ce man at(1) a crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "prvn铆 mechaniky"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Nem谩te nastaveno X. Opravdu je pot艡ebujete?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Bohu啪el nen铆 dostupn谩 啪谩dn谩 disketov谩 mechanika"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Konfigurace t茅to tisk谩rny je pln臎 automatick谩. Pokud nebyla tisk谩rna spr谩vn臎 "
+"detekov谩na nebo preferujete vlastn铆 nastaven铆 tisku, zvolte \"Ru膷n铆 "
+"konfigurace\"."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Jak媒 typ diskov茅ho odd铆lu?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Pomoc铆 startovac铆 diskety m暖啪ete spustit Linux bez pou啪it铆 norm谩ln铆ho\n"
-"zav谩d臎c铆ho programu (bootloader). To je u啪ite膷n茅 pokud nechcete instalovat\n"
-"LILO (nebo Grub), nebo jin媒 opera膷n铆 syst茅m odstran铆 LILO, nebo LILO\n"
-"na va拧em po膷铆ta膷i nefunguje. Vlastn铆 startovac铆 disketa tak茅 m暖啪e b媒t\n"
-"pou啪ita spolu s \"Mandrake z谩chrann媒m diskem\" (rescue image), co啪 "
-"poskytuje\n"
-"煤膷innou pomoc p艡i hav谩rii syst茅mu. Chcete vytvo艡it startovac铆 disketu?\n"
-"%s"
+"seznam soubor暖 poslan媒 p艡es FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Rozhran铆"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"popis voleb:\n"
+"\n"
+"- Z谩loha syst茅mov媒ch soubor暖:\n"
+" \n"
+"\tTato volba z谩lohuje adres谩艡 /etc, kter媒 obsahuje v拧echny\n"
+"\tkonfigura膷n铆 soubory. D谩vejte pozor p艡i obnov臎 na to,\n"
+"\taby se nep艡epsaly soubory:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Z谩lohovat soubory u啪ivatel暖:\n"
+"\n"
+"\tTato volba dovoluje vybrat v拧echny u啪ivatele, kter茅\n"
+"\t\tchcete z谩lohovat.\n"
+"\tAby se u拧et艡ilo m铆sto na disku, nen铆 dobr茅 zahrnout cache\n"
+"\tod prohl铆啪e膷e.\n"
+"\n"
+" - Z谩lohovat ostatn铆 soubory:\n"
+"\n"
+"\tTato volba dovol铆 p艡idat dal拧铆 data pro z谩lohov谩n铆.\n"
+"\tV sou膷asnosti nen铆 mo啪n茅 p艡i tomto z谩lohov谩n铆 zvolit\n"
+"\tp艡铆r暖stkov茅 z谩lohov谩n铆.\t\n"
+"\n"
+" - P艡铆r暖stkov茅 z谩lohov谩n铆:\n"
+"\n"
+"\tP艡铆r暖stkov茅 z谩lohov谩n铆 je velmi mocn媒 druh z谩lohov谩n铆,\n"
+"\tproto啪e dovoluje z谩lohovat v拧echna data pouze poprv茅\n"
+"\ta d谩le se z谩lohuj铆 pouze zm臎ny.\n"
+"\tB臎hem obnovy tak budete moci zadat, od jak茅ho data se\n"
+"\tmaj铆 data obnovit.\n"
+"\tPokud nezvol铆te tuto mo啪nost, bude p艡i ka啪d茅 z谩loze\n"
+"\tp艡edchoz铆 z谩loha smaz谩na.\n"
"\n"
"\n"
-"(VAROV脕N脥! Pro ko艡enov媒 odd铆l pou啪铆v谩te XFS, vytvo艡en铆 \n"
-"spou拧t臎c铆 diskety bude z艡ejm臎 ne煤sp臎拧n茅, proto啪e XFS\n"
-"pot艡ebuje velmi velk媒 ovlada膷)"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Pomoc铆 startovac铆 diskety je mo啪n茅 spustit syst茅m Linux bez z谩vislosti na\n"
-"zavad臎膷i syst茅mu. To je u啪ite膷n茅 t艡eba v p艡铆pad臎, 啪e nechcete instalovat "
-"SILO\n"
-"na po膷铆ta膷, nebo jin媒 opera膷n铆 syst茅m SILO p艡epsal nebo SILO nepracuje "
-"spr谩vn臎\n"
-"s hardwarovou konfigurac铆. Vlastn铆 startovac铆 disketa je tak茅 u啪ite膷n谩 "
-"tehdy,\n"
-"pokud je pot艡eba prov茅st opravu syst茅mu po p艡edchoz铆m selh谩n铆.\n"
+"Argumenty: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Pokud chcete vytvo艡it startovac铆 disketu, vlo啪te disketu do mechaniky\n"
-"a stiskn臎te \"OK\"."
+"Povol铆/zak谩啪e v媒pis syslog hl谩拧ek na konzoli 12. V媒raz \\fIexpr\\fP\n"
+"ur膷uje, co se bude logovat (v铆ce detail暖 najdete v n谩pov臎d臎 syslog.conf(5))\n"
+"a dev ur膷uje na kter茅 za艡铆zen铆 se bude log pos铆lat."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Zav谩d臎c铆 program nelze nainstalovat na odd铆l %s\n"
+msgid "comma separated strings"
+msgstr "膷谩rkou odd臎len茅 znakov茅 艡et臎zce"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "nen铆 dost m铆sta v adres谩艡i /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Zde je seznam po膷铆ta膷暖, ze kter媒ch je mo啪n茅 vyu啪铆t skenery: "
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
+msgid "Messages"
+msgstr "Zpr谩vy"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Nezn谩m谩|CPH06X (bt878) [v铆ce dodavatel暖]"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stisknete ENTER pro start vybran茅ho OS, 'e' pro upravu"
+msgid "POP and IMAP Server"
+msgstr "POP a IMAP server"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
+msgid "Mexico"
+msgstr "Mexiko"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
+msgid "Model stepping"
+msgstr "膶铆slov谩n铆 modelu"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "M谩te n臎jak茅 %s rozhran铆?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO s textovou nab铆dkou"
+msgid "Switzerland"
+msgstr "艩v媒carsko"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nab铆dkou"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Mo啪nosti vzd谩len茅 lpd tisk谩rny"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Vita Vas %s, program pro start operacniho systemu!\n"
+"GNU/Linux je v铆ceu啪ivatelsk媒 syst茅m, co啪 znamen谩, 啪e ka啪d媒 u啪ivatel m暖啪e\n"
+"m铆t sv茅 vlastn铆 nastaven铆, soubory atd. V铆ce se do膷tete v p艡铆ru膷ce \"Za膷铆n谩me"
+"\".\n"
+"Na rozd铆l od u啪ivatele root, kter媒 je spr谩vcem po膷铆ta膷e, u啪ivatel茅, kte艡铆 "
+"jsou\n"
+"zde vytvo艡eni, nemaj铆 opr谩vn臎n铆 m臎nit nic krom臎 sv媒ch vlastn铆ch soubor暖 a\n"
+"nastaven铆. Doporu膷uje se vytvo艡it 煤膷et pro minim谩ln臎 jednoho b臎啪n茅ho "
+"u啪ivatele.\n"
+"Tento 煤膷et se pou啪铆v谩 na v拧echny b臎啪n茅 煤koly. A膷koliv je velmi praktick茅\n"
+"p艡ihla拧ovat se ka啪d媒 den jako u啪ivatel root, je to tak茅 velmi nebezpe膷n茅!\n"
+"Jedna mal谩 chyba m暖啪e zp暖sobit, 啪e cel媒 opera膷n铆 syst茅m ji啪 nebude funk膷n铆.\n"
+"Pokud ud臎l谩te chybu jako norm谩ln铆 u啪ivatel, m暖啪ete p艡ij铆t pouze o sv茅 "
+"informace,\n"
+"ale nepo拧kod铆 se cel媒 syst茅m.\n"
"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"pockejte %d vterin pro automaticky start.\n"
+"Jako prvn铆 zadejte va拧e skute膷n茅 jm茅no. To nen铆 samoz艡ejm臎 povinn茅 - m暖啪ete\n"
+"zadat co chcete. Aplikace DrakX pou啪ije prvn铆 slovo jako u啪ivatelsk茅 jm茅no,\n"
+"pod kter媒m se bude u啪ivatel hl谩sit do syst茅mu, a p艡edvypln铆 jej do pol铆膷ka\n"
+"\"U啪ivatelsk茅 jm茅no\". To je mo啪n茅 n谩sledn臎 zm臎nit.\n"
+"D谩le se zad谩v谩 heslo pro u啪ivatele. Volba hesla pro norm谩ln铆 u啪ivatele sice "
+"nen铆\n"
+"z hlediska bezpe膷nosti tak kritick谩 jako v p艡铆pad臎 spr谩vce, ale i tak se "
+"doporu膷uje\n"
+"ji nepodce艌ovat; koneckonc暖, jde o zabezpe膷en铆 soubor暖 tohoto u啪ivatele.\n"
"\n"
+"Pokud klepnete na \"P艡idat u啪ivatele\", m暖啪ete p艡id谩vat u啪ivatel暖, kolik\n"
+"pot艡ebujete, nap艡. sv茅 p艡谩tele, 煤膷et pro otce 膷i sestru. Pokud m谩te v拧echny\n"
+"u啪ivatele vytvo艡eny, klepn臎te na tla膷铆tko \"Hotovo\". \n"
+"\n"
+"Klepnut铆m na tla膷铆tko \"Roz拧铆艡en茅\" m暖啪ete pro nov媒 煤膷et zm臎nit shell, "
+"kter媒\n"
+"bude u啪ivatel pou啪铆vat (v媒choz铆 je bash)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "chyb铆 consolehelper"
+msgid "Configure Internet Access..."
+msgstr "Nastavuji p艡铆stup na Internet..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "chyb铆 kdesu"
+msgid "Norway"
+msgstr "Norsko"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Sejmut茅 obrazovky budou dostupn茅 po instalaci v adres谩艡i %s"
+msgid "Danish"
+msgstr "D谩nsk茅"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Nelze prov茅st sejmut铆 obrazovky p艡ed rozd臎len铆m disk暖"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Automaticky nastav铆 podporu numerick茅 kl谩vesnice v konzoli\n"
+"a v XFree p艡i startu."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Pros铆m zadejte IP nastaven铆 pro tento po膷铆ta膷.\n"
+"Ka啪d谩 polo啪ka mus铆 b媒t zad谩na jako IP adresa v 'desetinn茅' form臎\n"
+"(nap艡铆klad 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Distribuce Mandrake Linux je slo啪ena z n臎kolika CD. Instala膷n铆 program v铆,\n"
+"na kter茅m disku je um铆st臎n jak媒 soubor a v p艡铆pad臎 pot艡eby vysune CD a "
+"vy啪谩d谩\n"
+"si v媒m臎nu CD za po啪adovan茅."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
+msgid "Processors"
+msgstr "Procesory"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulharsko"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "Nen铆 vybr谩na 啪谩dn谩 NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard a Jan Mayen Islands"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "kB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Vyskytl se probl茅m b臎hem konfigurace.\n"
+"Otestujte p艡ipojen铆 k Internetu pomoc铆 net_monitor nebo mcc. Pokud nen铆 "
+"spojen铆 funk膷n铆, bude pot艡eba asi znovu na膷铆st konfiguraci"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Spojen茅 st谩ty americk茅"
+msgid "partition %s is now known as %s"
+msgstr "odd铆l %s je nyn铆 rozpozn谩n jako %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Rakousko"
+msgid "Backup Other files..."
+msgstr "Z谩lohovat dal拧铆 soubory..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "It谩lie"
+msgid "SMB server IP"
+msgstr "IP adresa SMB serveru"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Nizozem铆"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "艩v茅dsko"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Bude zaps谩na nov谩 tabulka odd铆l暖 na disku %s!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norsko"
+msgid "Installing HPOJ package..."
+msgstr "Instaluji bal铆膷ek HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "艠ecko"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Pomoc铆 startovac铆 diskety m暖啪ete spustit Linux bez pou啪it铆 norm谩ln铆ho\n"
+"zav谩d臎c铆ho programu (bootloader). To je u啪ite膷n茅 pokud nechcete instalovat\n"
+"LILO (nebo Grub), nebo jin媒 opera膷n铆 syst茅m odstran铆 LILO, nebo LILO\n"
+"na va拧em po膷铆ta膷i nefunguje. Vlastn铆 startovac铆 disketa tak茅 m暖啪e b媒t\n"
+"pou啪ita spolu s \"Mandrake z谩chrann媒m diskem\" (rescue image), co啪 "
+"poskytuje\n"
+"煤膷innou pomoc p艡i hav谩rii syst茅mu. Chcete vytvo艡it startovac铆 disketu?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "N臎mecko"
+msgid ", USB printer \\#%s"
+msgstr ", USB tisk谩rna \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "膶esk谩 republika"
+msgid "Latvian"
+msgstr "Litevsk茅"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgie"
+msgid "monthly"
+msgstr "ka啪d媒 m臎s铆c"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Francie"
+msgid "Module name"
+msgstr "N谩zev modulu"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Spustit p艡i startu"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Pou啪铆t p艡铆r暖stkovou z谩lohu (nep艡episovat star拧铆 z谩lohy)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba p艡i otev铆r谩n铆 %s pro z谩pis: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Prvn铆 sektor disku (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Nic ned臎lat"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nen铆 dostatek m铆sta pro automatick茅 rozd臎len铆 disku"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nelze pou啪铆t kryptovan媒 souborov媒 syst茅m na p艡ipojen媒 bod %s"
+msgid "Use Unicode by default"
+msgstr "Pou啪铆t Unicode jako v媒choz铆"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Pro tento p艡铆pojn媒 bod pot艡ebujete opravdov媒 souborov媒 syst茅m (ext2/ext3, "
-"ReiserFS, XFS nebo JFS)\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "modul j谩dra syst茅mu GNU/Linux, kter媒 ovl谩d谩 toto za艡铆zen铆"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adres谩艡 mus铆 krom臎 ko艡enov茅ho souborov茅ho syst茅mu z暖stat"
+msgid "Trying to rescue partition table"
+msgstr "Pokou拧铆m se obnovit tabulku odd铆l暖"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nelze pou啪铆t LVM Logick茅ho disku na p艡ipojen媒 bod %s"
+msgid "Option %s must be an integer number!"
+msgstr "Hodnota %s mus铆 b媒t cel茅 膷铆slo!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Zvolili jste softwarov媒 RAID odd铆l jako ko艡enov媒 odd铆l (/).\n"
-"S t铆m se nen铆 schopn媒 vypo艡谩dat 啪谩dn媒 zav谩d臎c铆 program bez pou啪it铆 odd铆lu\n"
-"/boot. Ujist臎te se pros铆m, 啪e jste tento odd铆l p艡idali"
+"Polo啪ky, kter茅 je pot艡eba vyplnit:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Odd铆l s p艡铆pojn媒m bodem %s u啪 existuje\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Nelze spustit aktualizaci na b臎啪铆c铆 syst茅m !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "N谩zev p艡铆pojn茅ho bodu m暖啪e obsahovat pouze p铆smena a 膷铆slice"
+msgid "Name: "
+msgstr "Jm茅no: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "P艡铆pojn茅 body (mount points) mus铆 za膷铆nat '/'"
+msgid "16 million colors (24 bits)"
+msgstr "16 mili贸n暖 barev (24 bit暖)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nem暖啪ete pou啪铆t ReiserFS pro odd铆l men拧铆 ne啪 32MB"
+msgid "Allow all users"
+msgstr "Povolit v拧em u啪ivatel暖m"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nem暖啪ete pou啪铆t JFS pro odd铆l men拧铆 ne啪 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr "Ofici谩ln铆 obchod spole膷nosti MandrakeSoft"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "M臎n铆m velikost"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabelov茅 p艡ipojen铆"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "U啪ivatel"
#: ../../fsedit.pm:1
#, c-format
@@ -1018,1255 +1930,263 @@ msgstr ""
"\n"
"Souhlas铆te s t铆m, 啪e p艡ijdete o v拧echny odd铆ly?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Chyba"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Prov茅st novou z谩lohu p艡ed obnovou (pouze pro p艡铆r暖stkovou z谩lohu)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "Tisk谩rna na paraleln铆m portu \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "s /usr"
+msgid "Name"
+msgstr "N谩zev"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "jednoduch媒"
+msgid "mkraid failed"
+msgstr "mkraid neusp臎l"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Aktivuji odkl谩dac铆 odd铆l %s"
+msgid "Button 3 Emulation"
+msgstr "Emulace 3 tla膷铆tka"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojov谩n铆 %s: %s"
+msgid "Sending files..."
+msgstr "Pos铆l谩m soubory..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "p艡ipojen铆 odd铆lu %s v adres谩艡i %s selhalo"
+msgid "Israeli (Phonetic)"
+msgstr "Izraelsk茅 (foneticky)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "P艡ipojuji odd铆l %s"
+msgid "access to rpm tools"
+msgstr "p艡铆stup k rpm n谩stroj暖m"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Kontroluji %s"
+msgid "edit"
+msgstr "upravit"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Form谩tuji odd铆l %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Mus铆te vybrat/zadat tisk谩rnu/za艡铆zen铆!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytv谩艡铆m a form谩tuji soubor %s"
+msgid "Permission problem accessing CD."
+msgstr "Probl茅my s pr谩vy p艡i p艡铆stupu na CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "nev铆m jak naform谩tovat %s na typ %s"
+msgid "Phone number"
+msgstr "Telefonn铆 膷铆slo"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s form谩tov谩n铆 %s skon膷ilo chybou"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Chyba: Ovlada膷 \"%s\" pro va拧i zvukovou kartu nen铆 na seznamu"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klepn臎te na \"D谩le ->\", pokud chcete smazat v拧echna data a odd铆ly na tomto\n"
-"pevn茅m disku. Bu膹te opatrn铆, po odklepnut铆 nelze obnovit 啪谩dn谩 d艡铆v臎j拧铆 "
-"data\n"
-"ani odd铆ly a to i pro Windows.\n"
-"\n"
-"Klepnut铆m na \"<- Zp臎t\" zru拧铆te tuto operaci bez ztr谩ty dat a odd铆l暖 na "
-"disku."
+msgid "Printer name, description, location"
+msgstr "N谩zev tisk谩rny, popis, um铆st臎n铆"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vyberte disk, kter媒 chcete smazat pro instalaci Mandrake Linux.\n"
-"Pamatujte na to, 啪e v拧echna data budou ztracena a nelze je ji啪 obnovit!"
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"\"Zvukov谩 karta\": pokud je detekov谩na v po膷铆ta膷i zvukov谩 karta, je zde\n"
-"zobrazena. Pokud ale vid铆te, 啪e zobrazen谩 karta nen铆 p艡esn臎 tak, kterou\n"
-"m谩te v po膷铆ta膷i, m暖啪ete klepnut铆m na tla膷铆tko vybrat jinou kartu a ovlada膷."
+"Pros铆m zvolte si\n"
+"m茅dium pro z谩lohy."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Zvukov谩 karta\": pokud je detekov谩na v po膷铆ta膷i zvukov谩 karta, je zde\n"
-"zobrazena. Pokud ale vid铆te, 啪e zobrazen谩 karta nen铆 p艡esn臎 tak, kterou\n"
-"m谩te v po膷铆ta膷i, m暖啪ete klepnut铆m na tla膷铆tko vybrat jinou kartu a ovlada膷."
+msgid "Use Xinerama extension"
+msgstr "Pou啪铆t roz拧铆艡en铆 Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je zavad臎膷 pro po膷铆ta膷e Macintosh. Umo啪艌uje spou拧t臎t jak GNU/Linux, "
-"MacOS tak i MacOSX, pokud jsou na po膷铆ta膷i nainstalov谩ny. Ve v臎t拧in臎\n"
-"p艡铆pad暖 jsou tyto opera膷n铆 syst茅my spr谩vn臎 detekov谩ny. Pokud nejsou, m暖啪ete\n"
-"zde na t茅to obrazovce p艡idat z谩znamy ru膷n臎. Dejte si ale pozor na spr谩vnou\n"
-"volbu parametr暖.\n"
-"\n"
-"Yaboot m谩 tyto hlavn铆 volby:\n"
-"\n"
-" * 脷vodn铆 hl谩拧ka: jednoduch谩 textov谩 zpr谩va, kter谩 je zobrazena p艡ed "
-"v媒zvou.\n"
-"\n"
-" * Spou拧t臎c铆 za艡铆zen铆: ud谩v谩 m铆sto, kde jsou informace pot艡ebn茅 pro "
-"spu拧t臎n铆\n"
-"GNU/Linuxu. Oby膷ejn臎 je to bootstrap odd铆l, kter媒 byl vytvo艡en ji啪 p艡edt铆m.\n"
-"\n"
-" * Prodleva pro Firmware: na rozd铆l od zavad臎膷e LILO jsou zde dv臎 prodlevy.\n"
-"Prvn铆 prodleva v sekund谩ch umo啪艌uje zvolit mezi spu拧t臎n铆m CD, OF boot,\n"
-"MacOS nebo Linuxu.\n"
-"\n"
-" * Prodleva pro j谩dro: tato prodleva je podobn谩 prodlev臎 pro LILO.\n"
-"Ud谩v谩 v n谩sobc铆ch 0,1 vte艡iny jak dlouho se 膷ek谩, ne啪 se zavede \n"
-"v媒choz铆 j谩dro.\n"
-"\n"
-" * Povolit spu拧t臎n铆 z CD?: tato volba dovoluje pou啪铆t \"C\" pro spu拧t臎n铆 "
-"CD.\n"
-"\n"
-" * Povolit OF Boot?: tato volba dovoluje pou啪铆t \"N\" pro spu拧t臎n铆 Open "
-"Firm.\n"
-"\n"
-" * V媒choz铆 OS: vyberte v媒choz铆 OS, kter媒 se spust铆 po uplynut铆 prodlevy."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Pro Yaboot, pro dal拧铆 opera膷n铆 syst茅my, pro alternativn铆 j谩dra nebo pro\n"
-"z谩chrann媒 disk lze zde zadat dal拧铆 parametry.\n"
-"\n"
-"Pro jin茅 OS je mo啪n茅 zadat pouze n谩zev a hlavn铆 odd铆l.\n"
-"\n"
-"Pro Linux je n臎kolik dal拧铆ch mo啪nost铆:\n"
-"\n"
-" * Jmenovka: je to jednoduch媒 n谩zev, kter茅 m暖啪ete napsat do p艡铆kazov茅ho\n"
-"艡谩dku pro Yaboot pro zvolen铆 dan茅ho syst茅mu.\n"
-"\n"
-" * Obraz: je to jm茅no j谩dra, ze kter茅ho se spust铆 syst茅m. Typicky je to "
-"vmlinux\n"
-"膷i obdoba slova vmlinux s p艡铆ponami.\n"
-"\n"
-" * Root: ko艡enov茅 za艡铆zen铆 \"/\" p艡i instalaci Linuxu.\n"
-"\n"
-" * P艡idat volby: na po膷铆ta膷铆ch Apple pot艡ebuje j谩dro dal拧铆 parametry, aby "
-"se\n"
-"spr谩vn臎 nastavil hardware pro video, 膷i provedla emulace tla膷铆tek my拧i\n"
-"na kl谩vesnici, proto啪e my拧 u po膷铆ta膷e Apple nem谩 druh茅 a t艡et铆 tla膷铆tko.\n"
-"Zde jsou n臎jak茅 p艡铆klady:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: tato volba je ur膷ena moduly, kter茅 se mus铆 nahr谩t do pam臎ti "
-"je拧t臎\n"
-"d艡铆ve, ne啪 je p艡铆stupn媒 spou拧t臎c铆 odd铆l, 膷i v p艡铆pad臎 opravy syst茅mu.\n"
-"\n"
-" * Velikost initrd: v媒choz铆 velikost ramdisku je 4,096 byt暖. Pokud "
-"pot艡ebujete\n"
-"v臎t拧铆 velikost, zadejte sem pot艡ebnou hodnotu.\n"
-"\n"
-" * Read-write: b臎啪n臎 je \"root\" odd铆l p艡ipojen nejd艡铆ve v re啪imu pouze pro\n"
-"膷ten铆, aby se provedlo otestov谩n铆 syst茅mu p艡ed t铆m, ne啪 se pou啪ije pro b臎h.\n"
-"Zde je mo啪n茅 toto chov谩n铆 zm臎nit.\n"
-"\n"
-" * Bez grafiky: grafick茅 za艡铆zen铆 na po膷铆ta膷铆ch Apple je n臎kdy "
-"problematick茅\n"
-"a tak je mo啪n茅 zadat tuto volbu a zvolit nativn铆 podporu.\n"
-"\n"
-" * V媒choz铆: zvol铆 tuto polo啪ku jako v媒choz铆 pro v媒b臎r z nab铆dky, kdy sta膷铆\n"
-"pouze stisknout ENTER a spust铆 se. Tato polo啪ka je ozna膷ena \"*\" a v拧echny\n"
-"v媒b臎ry se zobraz铆 po stisknut铆 tla膷铆tka [Tab]."
+"Nelze korektn臎 ukon膷it mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Aplikace DrakX se nejd艡铆ve pokus铆 naj铆t v拧echny pevn茅 disky v po膷铆ta膷i.\n"
-"Tak茅 se pokus铆 nal茅zt jeden nebo v铆ce PCI SCSI adapt茅r暖. Pokud n臎jak媒 "
-"najde,\n"
-"automaticky nainstaluje spr谩vn媒 ovlada膷.\n"
-"\n"
-"Proto啪e automatick谩 detekce hardware nemus铆 v啪dy nal茅zt v拧echny typy "
-"hardware,\n"
-"budete v dialogu dot谩z谩ni, zda v暖bec m谩te n臎jak媒 SCSI adapt茅r. \n"
-"Pokud si budete muset vybrat ovlada膷 ru膷n臎, aplikace DrakX se zept谩,\n"
-"zda pro n臎j chcete zadat n臎jak茅 volby M臎li byste povolit aplikaci DrakX,\n"
-"a钮 se pokus铆 zjistit, kter茅 volby jsou pro danou kartu pot艡eba. V臎t拧inou to\n"
-"funguje dob艡e.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat dal拧铆 informace pro ovlada膷 "
-"ru膷n臎."
+msgid "West Europe"
+msgstr "Z谩padn铆 Evropa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Zde si m暖啪ete vybrat tiskov媒 syst茅m, kter媒 budete pou啪铆vat. Jin茅 OS "
-"nab铆zej铆\n"
-"jeden, Mandrake nab铆z铆 dva. Ka啪d媒 z nich je nejvhodn臎j拧铆 pro r暖zn茅 typy\n"
-"konfigurac铆.\n"
-"\n"
-" * \"pdq\" - co啪 znamen谩 'print, don't queue' a je vhodn媒 tehdy, pokud "
-"nem谩te\n"
-"啪谩dn茅 s铆钮ov茅 tisk谩rny. Zvl谩d谩 pouze n臎kolik mo啪nost铆 a tisk na n臎j ze s铆t臎\n"
-"je velmi pomal媒. Pokud s GNU/Linuxem teprve za膷铆n谩te, pak je \"pdq\"\n"
-"doporu膷en媒 tiskov媒 syst茅m pro v谩s.\n"
-"\n"
-" * \"CUPS\"'Common Unix Printing System' je vynikaj铆c铆 v tisku na lok谩ln铆\n"
-"tisk谩rny stejn臎 jako p艡i tisku na tisk谩rnu na druh茅 stran臎 planety. "
-"Nastaven铆\n"
-"je jednoduch茅 a m暖啪e fungovat jako klient i server pro klienty z \"lpd\"\n"
-"syst茅mu, tak啪e je s nimi kompatibiln铆. Je mo啪n茅 nastavit spoustu voleb,\n"
-"ale z谩kladn铆 nastaven铆 je velmi jednoduch茅. Pokud pot艡ebujete emulovat\n"
-"\"lpd\" server, sta膷铆 spustit d茅mona \"cups-lpd\". M谩 tak茅 grafick茅 "
-"prost艡ed铆\n"
-"pro tisk a nastaven铆 tisk谩rny.\n"
+"[VOLBY] [NAZEV_PROGRAMU]\n"
"\n"
-"Pokud nyn铆 provedete volbu a pozd臎ji budete cht铆t tiskov媒 syst茅m zm臎nit,\n"
-"m暖啪ete to prov茅st pomoc铆 n谩stroje PrinterDrake z ovl谩dac铆ho centra Mandrake "
-"tak,\n"
-"啪e klepnete na tla膷铆tko Expert."
+"[VOLBY]:\n"
+" --help - vyp铆拧e tuto n谩pov臎du.\n"
+" --report - program m暖啪e b媒t libovoln媒 mandrake n谩stroj\n"
+" --incident - program m暖啪e b媒t libovoln媒 mandrake n谩stroj"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO a Grub jsou zavad臎膷e syst茅mu. Tato 膷谩st je b臎啪n臎 pln臎 automatick谩.\n"
-"DrakX analyzuje zav谩d臎c铆 sektor disku a zachov谩 se podle toho, co zde\n"
-"nalezne:\n"
-"\n"
-" * pokud nalezne zav谩d臎c铆 sektor Windows, p艡ep铆拧e ho sektorem pro LILO/Grub\n"
-"tak, aby bylo mo啪n茅 spou拧t臎t jak syst茅m Windows tak i Linux;\n"
-"\n"
-" * pokud nalezne zav谩d臎c铆 sektor pro LILO nebo Grub, tak jej p艡ep铆拧e nov媒m.\n"
-"\n"
-"Pokud instala膷n铆 program nedok谩啪e rozhodnout, zept谩 se na to, kam m谩 "
-"zavad臎膷\n"
-"um铆stit.\n"
-"\n"
-"\"Spou拧t臎c铆 za艡铆zen铆\": ve v臎t拧in臎 p艡铆pad暖 nen铆 nutn茅 m臎nit v媒choz铆\n"
-"nastaven铆 (\"Prvn铆 sektor disku (MBR)\"), ale zavad臎膷 lze nainstalovat na \n"
-"druh媒 disk (\"/dev/hdb\") nebo dokonce na disketu (\"Na disketu\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 verze %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Po nastaven铆 obecn媒ch parametr暖 zavad臎膷e syst茅mu bude k dispozici\n"
-"seznam voleb pro zav谩d臎n铆, kter媒 se zobraz铆 p艡i zav谩d臎n铆 syst茅mu.\n"
-"\n"
-"Pokud ji啪 m谩te na po膷铆ta膷i jin媒 opera膷n铆 syst茅m, automaticky bude za艡azen "
-"do\n"
-"nab铆dky pro spou拧t臎n铆. Zde je mo啪n茅 d谩le doladit volby, kter茅 se p艡ed谩vaj铆 "
-"t铆m,\n"
-"啪e na danou nab铆dkou vyberete a klepnete na tla膷铆tko \"Upravit\", pokud jej "
-"chcete\n"
-"upravit, \"Odstranit\" pou啪ijte pro odebr谩n铆 a \"P艡idat\" pou啪ijte pokud "
-"chcete\n"
-"vytvo艡it novou polo啪ku.\n"
-"K dal拧铆mu kroku se dostanete klepnut铆m na tla膷铆tko \"Hotovo\".\n"
-"\n"
-"Pokud nechcete umo啪nit p艡铆stup k t臎mto opera膷n铆m syst茅m暖m komukoliv, m暖啪ete\n"
-"je z nab铆dky odstranit smaz谩n铆m odpov铆daj铆c铆ch polo啪ek.. V tom p艡铆pad臎 ale\n"
-"mus铆te m铆t spou拧t臎c铆 disketu, ze kter茅 je mo啪n茅 tento opera膷n铆 syst茅m "
-"spustit!"
+msgid "Copying %s"
+msgstr "Kop铆ruji %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Pokud jsou n臎jak茅 pochybnosti, je zobrazen dialog s v媒b臎rem mo啪nost铆.\n"
-"\n"
-" * \"Jak媒 spou拧t臎膷 pou啪铆t:\" je mo啪n茅 si vybrat ze t艡铆 mo啪nost铆:\n"
-"\n"
-" * \"GRUB\": pokud preferujete zavad臎膷 Grub (textov谩 nab铆dka).\n"
-"\n"
-" * \"LILO s grafickou nab铆dkou\": pokud preferujete LILO s grafick媒m\n"
-"rozhran铆m.\n"
-"\n"
-" * \"LILO s textovou nab铆dkou\": pokud preferujete textov茅 rozhran铆.\n"
-"\n"
-" * \"Spou拧t臎c铆 za艡铆zen铆\": ve v臎t拧in臎 p艡铆pad暖 nen铆 nutn茅 m臎nit v媒choz铆\n"
-"nastaven铆 (\"/dev/hda\"), ale lze nainstalovat zavad臎膷 na druh媒 disk\n"
-"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Prodleva p艡es spu拧t臎n铆m\": pokud zapnete po膷铆ta膷, je v tomto 膷ase\n"
-"umo啪n臎no u啪ivateli vybrat si jin媒 syst茅m z nab铆dky p艡ed t铆m, ne啪 bude\n"
-"zaveden v媒choz铆 syst茅m.\n"
-"\n"
-"!! Vyvarujte se pokus暖 nenainstalovat zavad臎膷 (vybr谩n铆m volby \"P艡esko膷it"
-"\"),\n"
-"proto啪e by m臎l existovat zp暖sob, jak zav茅st syst茅m Mandrake Linux!\n"
-"Tak茅 si dob艡e rozmyslete, jak茅 zm臎ny zde prov谩d铆te !!\n"
-"\n"
-"Klepnut铆m na tla膷铆tko \"Roz拧铆艡en茅\" se dialog roz拧铆艡铆 o dal拧铆 mo啪nosti,\n"
-"vyhrazen茅 pro znal茅 u啪ivatele."
+msgid "Choose color"
+msgstr "v媒b臎r barvy"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"N谩sleduj铆c铆 rozhodnut铆 je jedn铆m z t臎ch, kter茅 ovliv艌uj铆 celkovou "
-"bezpe膷nost\n"
-"syst茅mu GNU/Linux, tj. volba hesla pro u啪ivatele \"Root\". Root je spr谩vcem\n"
-"syst茅mu, je odpov臎dn媒 za prov谩d臎n铆 aktualizac铆, p艡id谩v谩n铆 u啪ivatel暖 a tak茅\n"
-"za celkov茅 nastaven铆 syst茅mu. Zkr谩cen臎: \"root\" m暖啪e 煤pln臎 v拧echno!\n"
-"To je tak茅 d暖vodem, pro膷 se heslo vol铆 takov茅, aby se nedalo lehce uhodnout\n"
-"a instala膷n铆 program DrakX zkontroluje, zda nen铆 p艡铆li拧 jednoduch茅. Jak "
-"vid铆te,\n"
-"je mo啪n茅 heslo nezadat, ale toto velmi d暖razn臎 nedoporu膷ujeme, a to z "
-"jednoho\n"
-"d暖vodu. Nemyslete si, 啪e pokud spust铆te syst茅m GNU/Linux, 啪e je v拧e bezpe膷n茅 "
-"a 啪e se nem暖啪e nic st谩t.. Vzhledem k tomu, 啪e na u啪ivatele \"root\" se "
-"nevztahuj铆\n"
-"b臎啪n谩 omezen铆, m暖啪e nen谩vratn臎 po拧kodit cel媒 syst茅m, smazat data z jin媒ch\n"
-"odd铆l暖 na disku a opera膷n铆ch syst茅m暖, vymazat pot艡ebn茅 soubory nebo cel茅\n"
-"odd铆ly, atd. Proto je d暖le啪it茅, aby nebylo jednoduch茅 se t铆mto u啪ivatelem "
-"st谩t.\n"
-"\n"
-"Zvolen茅 heslo by se m臎lo skl谩dat ze znak暖 a 膷铆slic a m臎lo by b媒t dlouh茅\n"
-"minim谩ln臎 8 znak暖. Tak茅 nen铆 dobr茅 si ho kamkoliv poznamen谩vat - po\n"
-"nalezen铆 va拧铆 pozn谩mky m暖啪e b媒t velmi jednoduch茅 se do va拧eho syst茅mu\n"
-"dostat.\n"
-"\n"
-"Nevolte v拧ak heslo p艡铆li拧 dlouh茅 nebo komplikovan茅, bude nutn茅 si jej bez\n"
-"v臎t拧铆ch pot铆啪铆 zapamatovat.\n"
-"\n"
-"P艡i zad谩v谩n铆 nebude heslo na obrazovce zobrazeno. Proto se heslo zad谩v谩\n"
-"dvakr谩t pro ov臎艡en铆, zda nedo拧lo k p艡eklepu p艡i prvn铆m pokusu. Tak je mo啪n茅\n"
-"heslo opravit a zadat dvakr谩t stejn茅. Pokud se v谩m p艡esto poda艡铆 zadat "
-"stejn媒\n"
-"p艡eklep dvakr谩t, budete muset toto heslo s p艡eklepem pou啪铆t p艡i prvn铆m\n"
-"p艡ihl谩拧en铆.\n"
-"\n"
-"Jestli啪e chcete pou啪铆t ov臎艡ovac铆 server, klepn臎te na tla膷铆tko \"Roz拧铆艡en茅"
-"\".\n"
-"\n"
-"Pokud se ve va拧铆 s铆ti pou啪铆v谩 pro ov臎艡ov谩n铆 u啪ivatel暖 protokol LDAP, NIS,\n"
-"nebo ov臎艡ovac铆 dom茅na Windows PDC, vyberte odpov铆daj铆c铆 protokol. Pokud\n"
-"o tom nic nev铆te, zeptejte se spr谩vce va拧铆 s铆t臎.\n"
-"\n"
-"Pokud nen铆 po膷铆ta膷 p艡ipojen do 啪谩dn茅 spravovan茅 s铆t臎 a v臎艡铆te v拧em, kte艡铆 "
-"maj铆\n"
-"p艡铆stup k po膷铆ta膷i, m暖啪ete vybrat volbu \"Bez hesla\".mo啪nost \"Lok谩ln铆 "
-"soubory\"."
+msgid "Dominican Republic"
+msgstr "Dominik谩nsk谩 republika"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vyberte pros铆m spr谩vn媒 port. Nap艡铆klad \"COM1\" pod MS Windows se\n"
-"v Linuxu jmenuje \"ttyS0\"."
+msgid "Swaziland"
+msgstr "Svazijsko"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Aplikace DrakX obvykle zjist铆 po膷et tla膷铆tek na va拧铆 my拧i. Pokud ne, "
-"p艡edpokl谩d谩,\n"
-"啪e m谩te dvoutla膷铆tkovou my拧 a nastav铆 emulaci pro t艡et铆 tla膷铆tko my拧i. "
-"Aplikace\n"
-"tak茅 um铆 rozpoznat, zda se jedn谩 o my拧 PS/2, USB nebo s茅riovou.\n"
-"\n"
-"Pokud chcete zadat jin媒 typ my拧i, vyberte odpov铆daj铆c铆 typ se seznamu.\n"
-"\n"
-"Pokud vyberete jinou my拧 ne啪 ta, kter谩 byla detekov谩na, zobraz铆 se "
-"testovac铆\n"
-"obrazovka. Zde otestujte jak tla膷铆tka tak i kole膷ko a ov臎艡te, zda je "
-"nastaven铆\n"
-"spr谩vn茅. Pokud my拧 nepracuje spr谩vn臎, stiskn臎te mezern铆k nebo kl谩vesu Enter\n"
-"na \"Zru拧it\"\n"
-" a vyberte jin媒 typ.\n"
-"\n"
-"My拧i s kole膷kem nejsou v n臎kter媒ch p艡铆padech automaticky rozpozn谩ny. Budete\n"
-"je muset vybrat ze seznamu. Ujist臎te se, 啪e vyberete my拧 s odpov铆daj铆c铆m "
-"typem\n"
-"portu, ke kter茅mu je p艡ipojen谩. Pot茅, co stisknete tla膷铆tko \"D谩le ->\", \n"
-"zobraz铆 se obr谩zek s my拧铆. Aby se spr谩vn臎 kole膷ko aktivovalo, mus铆te "
-"pohybovat\n"
-"kole膷kem va拧铆 my拧i.\n"
-"Pot茅 ov臎艡te, zda-li je spr谩vn茅 nastaven铆 tla膷铆tek a pohybu va拧铆 my拧i."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"V媒b臎r preferovan茅ho jazyka ovliv艌uje dokumentaci, jazyk instala膷n铆ho "
-"programu\n"
-"a v拧ech program暖 obecn臎. V prvn铆m kroku si vyberete region kde 啪ijete\n"
-"a potom jazyk kter媒m mluv铆te.\n"
-"\n"
-"Tla膷铆tko \"Roz拧铆艡en茅\" umo啪艌uje zvolit dal拧铆 jazyky, kter茅 budou tak茅\n"
-"nainstalov谩ny a m暖啪ete je pou啪铆t v syst茅mu. V媒b臎rem dal拧铆ch jazyk暖 "
-"nainstalujete\n"
-"soubory s aplikacemi a dokumentac铆 specifick茅 pro tyto jazyky. Pokud "
-"nap艡铆klad\n"
-"na po膷铆ta膷i pracuj铆 ob膷as lid茅 ze 艩pan臎lska, vyberte angli膷tinu jako hlavn铆\n"
-"jazyka pod tla膷铆tkem roz拧铆艡en茅 zatrhn臎te volbu \"艩pan臎l拧tina|艩pan臎lsko\".\n"
-"\n"
-"P艡i v媒b臎ru jazyka nejste omezeni pouze na jedin媒 dal拧铆. M暖啪ete si jich "
-"vybrat\n"
-"v铆ce nebo dokonce nainstalovat v拧echny vybr谩n铆m volby \"V拧echny jazyky\".\n"
-"P艡铆davn谩 volba \"Pou啪铆t Unicode jako v媒choz铆\" nastavuje cel媒 syst茅m na\n"
-"pou啪铆v谩n铆 Unicode (UTF-8). Zat铆m je to ale experiment谩ln铆 volba. Pokud\n"
-"vyberete r暖zn茅 jazyky, kter茅 vy啪aduj铆 jin谩 k贸dov谩n铆, bude i p艡esto podpora\n"
-"pro Unicode nainstalov谩na.\n"
-"\n"
-"Zm臎nu r暖zn媒ch jazyk暖 instalovan媒ch v syst茅mu lze prov茅st pomoc铆 p艡铆kazu\n"
-"\"/usr/bin/localedrake\" spu拧t臎n茅ho jako u啪ivatel \"root\". Spu拧t臎n铆 pod\n"
-"b臎啪n媒m u啪ivatelem zp暖sob铆 zm臎nu nastaven铆 pouze pro dan茅ho u啪ivatele.Lze "
-"takto doinstalovat v铆ce jazyk暖. Pokud m谩te jazyky vybr谩ny, klikn臎te na \"OK"
-"\"\n"
-"a instalace bude pokra膷ovat dal拧铆m krokem."
+msgid "Please check if you are using CDRW media"
+msgstr "Zvolte pokud pou啪铆v谩te CDRW m茅dia"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Norm谩ln臎 zvol铆 instala膷n铆 program spr谩vnou kl谩vesnici na z谩klad臎 zvolen茅ho\n"
-"jazyka, tak啪e nen铆 pot艡eba nic v tomto kroku m臎nit. \n"
-"M暖啪e se ale st谩t, 啪e nem谩te kl谩vesnici, kter谩 odpov铆d谩 va拧emu jazyku: "
-"nap艡铆klad\n"
-"pokud jste anglicky hovo艡铆c铆 艩v媒car, stejn臎 chcete m铆t 拧v媒carskou "
-"kl谩vesnici.\n"
-"Nebo pokud mluv铆te anglicky, ale 啪ijete v Quebecu, je to stejn媒 p艡铆pad. V "
-"obou\n"
-"p艡铆padech se m暖啪ete vr谩tit na tento instala膷n铆 krok a vybrat si "
-"odpov铆daj铆c铆\n"
-"kl谩vesnici ze seznamu.\n"
-"\n"
-"Pokud m谩te kl谩vesnici pro jin媒 jazyk, klepn臎te na tla膷铆tko \"V铆ce\"\n"
-"a zobraz铆 se kompletn铆 seznam v拧ech podporovan媒ch rozlo啪en铆 kl谩vesnic.\n"
-"\n"
-"Pokud vyberete rozlo啪en铆 kl谩vesnice zalo啪en茅 na abeced臎 jin茅 ne啪 latince,\n"
-"budete v dal拧铆m dialogu vyzv谩ni k v媒b臎ru kl谩vesov茅 zkratky, kter谩 bude "
-"p艡ep铆nat\n"
-"rozlo啪en铆 kl谩vesnice mezi latinkou a v谩mi zvolen媒m rozlo啪en铆m."
+"Vyberte disk, kter媒 chcete smazat pro instalaci Mandrake Linux.\n"
+"Pamatujte na to, 啪e v拧echna data budou ztracena a nelze je ji啪 obnovit!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Tento krok je objev铆 pouze tehdy, pokud je na va拧em po膷铆ta膷i nalezen star拧铆\n"
-"odd铆l GNU/Linuxu.\n"
-"\n"
-"Instala膷n铆 program pot艡ebuje v臎d臎t, zda m谩 prov茅st instalaci nebo pouze\n"
-"aktualizaci existuj铆c铆ho syst茅mu Mandrake Linux.\n"
-"\n"
-" * \"Instalace\": Nejb臎啪n臎j拧铆 volba, provede kompletn铆 v媒maz star茅ho "
-"syst茅mu.\n"
-"Pokud si p艡ejete zm臎nit rozm铆st臎n铆 odd铆l暖, zm臎nit souborov媒 syst茅m, "
-"pou啪ijte\n"
-"tuto volbu. M暖啪ete samoz艡ejm臎 tak茅 n臎kter茅 odd铆ly zachovat p艡ed p艡eps谩n铆m.\n"
-"\n"
-" * \"Aktualizace\": tato volba provede aktualizaci instalovan媒ch bal铆膷k暖.\n"
-"Aktu谩ln铆 rozm铆st臎n铆 diskov媒ch odd铆l暖 a u啪ivatelsk谩 data z暖stanou zachov谩na.\n"
-"Bude provedena ale v臎t拧ina konfigura膷n铆ch krok暖, stejn臎 jako p艡i instalaci.\n"
-"\n"
-"Pou啪it铆 volby \"Aktualizace\" bude fungovat bez probl茅m暖 na st谩vaj铆c铆 "
-"verzi \n"
-"\"8.1\" a nov臎j拧铆. Aktualizace na verz铆ch star拧铆ch ne啪 \"8.1\" nen铆 "
-"doporu膷ov谩no."
+msgid " on parallel port \\#%s"
+msgstr " na paraleln铆m portu \\#%s"
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Zem臎\": zkontrolujte aktu谩ln铆 v媒b臎r zem臎. Pokud nejste v dan茅 zemi, "
-"klepn臎te\n"
-"na tla膷铆tko \"Nastavit\" a vyberte si jinou. Pokud va拧e zem臎 na prvn铆m "
-"seznamu,\n"
-"klepn臎te na tla膷铆tko \"V铆ce\" a z铆sk谩te kompletn铆 seznam zem铆."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instala膷n铆 program nalezl na disku v铆ce ne啪 jeden odd铆l s Microsoft "
-"Windows.\n"
-"Pros铆m vyberte si jeden z nich, kter媒 je pot艡eba zmen拧it pro novu instalaci\n"
-"syst茅mu Mandrake Linux.\n"
-"\n"
-"Ka啪d媒 odd铆l je zobrazen n谩sledovn臎: \"Jm茅no pro Linux\",\n"
-"\"Jm茅no pro Windows\", \"Velikost\".\n"
-"\n"
-"\"Jm茅no pro Linux\" je slo啪eno n谩sledovn臎: \"typ pevn茅ho disku\",\n"
-"\"膷铆slo disku\", \"膷铆slo odd铆lu\". (nap艡铆klad \"hda1\").\n"
-"\n"
-"Pokud m谩te IDE disky, pak je \"typ pevn茅ho disku\" \"hd\", pokud m谩te SCSI,\n"
-"ozna膷en铆 bude \"sd\".\n"
-"\n"
-"\"膶铆slo disku\" je v啪dy p铆smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamen谩 \"master disk na prim谩rn铆m IDE 艡adi膷i\",\n"
-"\n"
-" * \"b\" znamen谩 \"slave disk na prim谩rn铆m IDE 艡adi膷i\",\n"
-"\n"
-" * \"c\" znamen谩 \"master disk na sekund谩rn铆m IDE 艡adi膷i\",\n"
-"\n"
-" * \"d\" znamen谩 \"slave disk na sekund谩rn铆m IDE 艡adi膷i\".\n"
-"\n"
-"Pro SCSI disky plat铆, 啪e \"a\" je \"nejmen拧铆 SCSI ID\", \"b\" je \"druh茅\n"
-"nejmen拧铆 SCSI ID\" atd.\n"
-"\n"
-"\"Jm茅no pro Windows\" je p铆smeno, kter茅 je pou啪ito ve Windows\n"
-"(prvn铆 odd铆l nebo disk m谩 p铆smeno \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Standardn铆 dvoutla膷铆tkov谩 my拧"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V t茅to chv铆li je pot艡eba ur膷it, kter媒(茅) odd铆l(y) budou pou啪ity pro "
-"instalaci\n"
-"syst茅mu Mandrake Linux. Pokud byly odd铆ly ji啪 jednou definov谩ny, bu膹\n"
-"z p艡edchoz铆 instalace GNU/Linux nebo jin媒m programem na rozd臎len铆 disku,\n"
-"je mo啪n茅 pou啪铆t pr谩v臎 tyto odd铆ly. Jinak mus铆 b媒t odd铆ly nov臎 definov谩ny.\n"
-"\n"
-"Pro vytvo艡en铆 odd铆lu mus铆te nejd艡铆ve vybrat pevn媒 disk. Klepn臎te na \n"
-"\"hda\", co啪 je prvn铆 IDE disk, nebo na \"hdb\", co啪 je druh媒 disk,\n"
-"p艡铆padn臎 na \"sda\", co啪 je prvn铆 SCSI disk.\n"
-"\n"
-"Pro rozd臎len铆 vybran茅ho disku m暖啪ete pou啪铆t tyto volby:\n"
-"\n"
-" * \"V拧e smazat\": tato volba sma啪e v拧echny odd铆ly na disku.\n"
-"\n"
-" * \"Automaticky rozm铆stit\": dojde k automatick茅mu vytvo艡en铆 odd铆lu pro\n"
-"Ext2 a swap ve voln茅m prostoru disku.\n"
-"\n"
-" * \"V铆ce\": nab铆dne dal拧铆 mo啪nosti:\n"
-"\n"
-" * \"Ulo啪it tabulku odd铆l暖\": ulo啪铆 tabulku odd铆l暖 na disketu. To je\n"
-"vhodn茅 pro p艡铆pad po拧kozen铆 tabulky, kdy ji lze z t茅to z谩lohy obnovit.\n"
-"Doporu膷ujeme vyu啪铆t tuto mo啪nost.\n"
-"\n"
-" * \"Obnovit tabulku odd铆l暖\": obnov铆 tabulku odd铆l暖, kter谩 byla ji啪 "
-"d艡铆ve\n"
-"ulo啪ena na disketu.\n"
-"\n"
-" * \"Z谩chrana tabulky odd铆l暖\": pokud je tabulka po拧kozena, m暖啪ete se\n"
-"pokusit ji opravit. Bu膹te ale opatrn铆 a pamatujte na to, 啪e se to nemus铆 "
-"v啪dy\n"
-"poda艡it.\n"
-"\n"
-" * \"Znovu na膷铆st tabulku odd铆l暖\": zru拧铆 v拧echny zm臎ny a nahraje p暖vodn铆\n"
-"tabulku odd铆l暖.\n"
-"\n"
-" \"Automatick茅 p艡ipojov谩n铆 pro vyj铆mateln谩 m茅dia\": odzna膷en铆 t茅to volby\n"
-"zp暖sob铆, 啪e p艡i p艡ipojov谩n铆 a odpojov谩n铆 vyj铆mateln媒ch m茅di铆 jako jsou CD-"
-"ROM\n"
-"disky a floppy disky je nutn茅 pou啪铆t ru膷n臎 p艡铆kaz mount.\n"
-"\n"
-" * \"Pr暖vodce\": pokud nem谩te dobr茅 znalosti o rozd臎lov谩n铆 disk暖, pou啪ijte\n"
-"tuto volbu, kdy se spust铆 pr暖vodce. Doporu膷ujeme, pokud nem谩te dobr茅 "
-"znalosti\n"
-"o vytv谩艡en铆 odd铆l暖 na disku.\n"
-"\n"
-" * \"Odvolat\": zru拧铆 v拧echny proveden茅 zm臎ny.\n"
-"\n"
-" * \"P艡epnout norm谩ln铆/expertn铆 re啪im\": dovoluje dal拧铆 akce s odd铆ly\n"
-"(typ odd铆lu, volby, form谩tov谩n铆) a zobraz铆 dal拧铆 informace.\n"
-"\n"
-" * \"Hotovo\": pokud m谩te disk rozd臎len, ulo啪铆 se zm臎ny na disk.\n"
-"\n"
-"Pokud definujete velikost odd铆lu, m暖啪ete p艡esn臎ji jejich velikost ur膷it "
-"pomoc铆\n"
-"kurzorov媒ch 拧ipek na kl谩vesnici.\n"
-"\n"
-"Pozn谩mka: ka啪dou volbu je mo啪n茅 zadat tak茅 z kl谩vesnice. Mezi odd铆ly se\n"
-"m暖啪ete pohybovat pomoc铆 kl谩ves [Tab] a [艩ipka nahoru/拧ipka dol暖].\n"
-"\n"
-"Pokud je vybr谩n odd铆l, lze pou啪铆t tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvo艡en铆 nov茅ho odd铆lu (pokud je vybr谩n pr谩zdn媒 odd铆l);\n"
-"\n"
-" * Ctrl-d pro smaz谩n铆 odd铆lu;\n"
-"\n"
-" * Ctrl-m pro zad谩n铆 bodu p艡ipojen铆.\n"
-"\n"
-"V铆ce informac铆 o jednotliv媒ch druz铆ch souborov媒ch syst茅m暖 naleznete\n"
-"v kapitole o ext2fs v \"Referen膷n铆 p艡铆ru膷ce\".\n"
-"\n"
-"Pokud instalujete na po膷铆ta膷 PPC, je pot艡eba vytvo艡it mal媒 odd铆l HFS,\n"
-"tzv. \"bootstrap\" o minim谩ln铆 velikosti 1MB, kter媒 bude pou啪it pro zavad臎膷\n"
-"Yaboot. Pokud vytvo艡铆te tento odd铆l v臎t拧铆, nap艡. 50 MB, je to dobr茅 m铆sto "
-"pro\n"
-"ulo啪en铆 ramdisku a j谩dra pro situace z谩chrany disku."
+msgid "Remove the logical volumes first\n"
+msgstr "Odeberte nejd艡铆ve logick茅 disky\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nyn铆 si vyberte 煤rove艌 zabezpe膷en铆 va拧eho po膷铆ta膷e Je z艡ejm茅, 啪e 膷铆m v铆ce\n"
-"je po膷铆ta膷 vyu啪铆v谩n a 膷铆m cenn臎j拧铆 data obsahuje, t铆m je pot艡eba zvolit "
-"vy拧拧铆\n"
-"煤rove艌. Na druhou stranu, vy拧拧铆 煤rove艌 znesnad艌uje n臎kter茅 obvykl茅 postupy.\n"
-"\n"
-"Pokud nev铆te co vybrat, ponechte v媒choz铆 nastaven铆."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Poka啪d茅, kdy啪 instalujete distribuci Mandrake Linux, je mo啪n茅, 啪e n臎kter茅\n"
-"bal铆膷ky byly od vyd谩n铆 distribuce aktualizov谩ny. Mohly to b媒t opravy chyb\n"
-"膷i 艡e拧en铆 mo啪n媒ch bezpe膷nostn铆ch probl茅m暖. Pokud chcete vyu啪铆t pr谩v臎\n"
-"t茅to nab铆dky, je mo啪n茅 tyto bal铆膷ky nyn铆 st谩hnout z Internetu. Zvolte \"Ano"
-"\"\n"
-"pokud m谩te funk膷n铆 p艡ipojen铆 na Internet nebo \"Ne\", pokud budete\n"
-"instalovat aktualizace pozd臎ji.\n"
-"\n"
-"Po zvolen铆 \"Ano\" se zobraz铆 seznam m铆st, odkud mohou b媒t aktualizace "
-"z铆sk谩ny.\n"
-"Vyberte si nejbli啪拧铆 m铆sto. N谩sledn臎 se objev铆 stromov媒 seznam bal铆膷k暖,\n"
-"kter媒 je mo啪no je拧t臎 upravit a stisknut铆m tla膷铆tka \"Instalovat\" se provede "
-"sta啪en铆\n"
-"a instalace vybran媒ch bal铆膷k暖. Akci m暖啪ete p艡eru拧it klepnut铆m na \"Zru拧it\"."
+"Nelze zapsat soubor /etc/sysconfig/bootsplash\n"
+"Soubor nebyl nalezen."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "P艡铆stup na Internet"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Ka啪d媒 nov臎 vytvo艡en媒 diskov媒 odd铆l mus铆 b媒t p艡ed pou啪it铆m zform谩tov谩n\n"
-"(form谩tov谩n铆m se mysl铆 vytvo艡en铆 souborov茅ho syst茅mu).\n"
-"\n"
-"Nyn铆 lze form谩tovat ji啪 existuj铆c铆 diskov茅 odd铆ly pro vymaz谩n铆\n"
-"v拧ech dat, kter谩 obsahuj铆. Pokud to chcete prov茅st, vyberte diskov茅 odd铆ly\n"
-"pro p艡eform谩tov谩n铆.\n"
-"\n"
-"Nen铆 ale nutn茅 p艡eform谩tovat v拧echny ji啪 existuj铆c铆 diskov茅 odd铆ly.\n"
-"Je nutn茅 p艡eform谩tovat odd铆ly, kter茅 obsahuj铆 opera膷n铆 syst茅m (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale nen铆 nutn茅 p艡eform谩tovat odd铆ly, kter茅 obsahuj铆\n"
-"data, kter谩 chcete zachovat (typicky /home).\n"
-"\n"
-"P艡i v媒b臎ru diskov媒ch odd铆l暖, kter茅 se budou form谩tovat bu膹te opatrn铆, "
-"v拧echna\n"
-"data na form谩tovan媒ch odd铆lech budou ztracena a nelze je ji啪 obnovit.\n"
-"\n"
-"Pokud je v拧e p艡ipraveno pro form谩tov谩n铆, klepn臎te na \"D谩le ->\".\n"
-"\n"
-"Klepn臎te na \"Zp臎t\" pokud chcete vybrat jin茅 odd铆ly pro instalaci\n"
-"syst茅mu Mandrake Linux.\n"
-"\n"
-"Klepnut铆m na \"Roz拧铆艡en茅\" m暖啪ete vybrat, kter茅 odd铆ly budou otestov谩ny\n"
-"na vadn茅 bloky."
+"hodnota pro y sou艡adnici\n"
+"pro textov媒 box v po膷tu znak暖"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Nyn铆 je instalace ukon膷ena a opera膷n铆 syst茅m GNU/Linux je p艡ipraven k "
-"pou啪it铆.\n"
-"Klepn臎te na \"D谩le ->\" a syst茅m bude restartov谩n. Potom m暖啪ete spustit GNU/"
-"Linux nebo\n"
-"Windows, z谩le啪铆 kter媒 preferujete\n"
-"\n"
-"Tla膷铆tko \"Roz拧铆艡en茅\" zobraz铆 dal拧铆 dv臎 tla膷铆tka:\n"
-"\n"
-" * Generovat disketu pro automatickou instalaci: vytvo艡铆 disketu, se kterou\n"
-"lze celou instalaci opakovat bez z谩sahu oper谩tora se stejn媒mi volbami,\n"
-"kter茅 byly zvoleny p艡i instalaci.\n"
-"\n"
-" Po klepnut铆 na toto tla膷铆tko se zobraz铆 dal拧铆 dv臎 volby:\n"
-"\n"
-" * : \"Zopakovat\": je to 膷谩ste膷n臎 automatick谩 instalace, kdy se "
-"potvrzuje\n"
-"krok p艡i rozd臎lov谩n铆 disk暖 (a pouze tento krok).\n"
-"\n"
-" * : \"Automaticky\": pln臎 automatick谩 instalace, data na pevn茅m disku\n"
-"budou zru拧ena a disk p艡eps谩n.\n"
-"\n"
-" Tato volba je velmi u啪ite膷n谩, kdy啪 pot艡ebujete nainstalovat v臎t拧铆 po膷et\n"
-"stejn媒ch po膷铆ta膷暖. V铆ce o t茅to mo啪nosti je na na拧ich WWW str谩nk谩ch.\n"
-"\n"
-" * \"Ulo啪it v媒b臎r bal铆膷k暖\"(*): ulo啪铆 v媒b臎r bal铆膷k暖, kter媒 byl zvolen p艡i\n"
-"instalaci. Pokud budete instalovat dal拧铆 po膷铆ta膷, vlo啪te disketu do "
-"mechaniky\n"
-"a spus钮te instalaci, stiskn臎te [F1] a napi拧te na p艡铆kazov媒 艡谩dek \n"
-">> linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) Pot艡ebujete disketu form谩tovanou FAT (Pod Linuxem ji vytvo艡铆te p艡铆kazem\n"
-"\"mformat a:\")"
+"V拧echny mo啪nosti tisku pro sou膷asnou tisk谩rnu jsou zobrazeny n铆啪e, nebo "
+"klepn臎te na tla膷铆tko \"Mo啪nosti tisk谩rny\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Povoluji servery..."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printing test page(s)..."
+msgstr "Tisknu testovac铆 str谩nku(y)"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Odd铆l s p艡铆pojn媒m bodem %s u啪 existuje\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2284,51 +2204,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"V tomto bod臎 si mus铆te rozhodnout, na kter茅 diskov茅 odd铆ly budete\n"
"instalovat nov媒 opera膷n铆 syst茅m Mandrake Linux. Pokud je disk pr谩zdn媒\n"
@@ -2392,280 +2310,139 @@ msgstr ""
"sekci\n"
"\"Spr谩va va拧ich odd铆l暖\" v p艡铆ru膷ce \"Za膷铆n谩me\"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Posledn铆 ot谩zka je na to, zda chcete spustit grafick茅 prost艡ed铆 p艡i startu.\n"
-"Tato ot谩zka se zobraz铆 i v p艡铆pad臎, 啪e nastaven铆 p艡edt铆m neotestujete.\n"
-"Je z艡ejm茅, 啪e odpov铆te \"Ne\" v p艡铆pad臎, 啪e po膷铆ta膷 bude pracovat\n"
-"jako server nebo v p艡铆pad臎, 啪e se nepoda艡ilo spr谩vn臎 nastavit grafickou "
-"kartu."
+msgid "Ukraine"
+msgstr "Ukrajina"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"V p艡铆pad臎, 啪e je pro va拧i kartu mo啪no pou啪铆t v铆ce r暖zn媒ch server暖 s 3D\n"
-"akcelerac铆 nebo bez, z谩le啪铆 na va拧em v媒b臎ru, kter媒 v谩m nejv铆ce vyhovuje."
+msgid "Application:"
+msgstr "Aplikace:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Rozli拧en铆\n"
-"\n"
-" Zde si m暖啪ete vybrat rozli拧en铆 a barevnou hloubku, kter茅 va拧e karta \n"
-"podporuje. Vyberte si to co v谩m nejv铆ce vyhovuje (v媒b臎r lze po instalaci\n"
-"samoz艡ejm臎 zm臎nit). Na monitoru bude zobrazena p艡铆klad nastaven铆."
+msgid "External ISDN modem"
+msgstr "Extern铆 ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" Instala膷n铆 program dok谩啪e v臎t拧inou automaticky detekovat a spr谩vn臎 \n"
-"nastavit monitor p艡ipojen媒 k va拧emu po膷铆ta膷i. Pokud se to nezda艡铆, lze se\n"
-"seznamu vybrat monitor, kter媒 m谩te."
+msgid "if set to yes, report check result by mail."
+msgstr "pokud je nastaveno, odes铆l谩 v媒sledek kontroly mailem."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Va拧e volba? (v媒choz铆 %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "艠e拧en铆 probl茅m暖"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (X Window System) je srdcem grafick茅ho rozhran铆 pro GNU/Linux, kter茅\n"
-"vyu啪铆vaj铆 dod谩van茅 grafick茅 prost艡ed铆 (KDE, GNOME, AfterStep, WindowMaker).\n"
-"\n"
-"Nyn铆 bude zobrazen seznam r暖zn媒ch parametr暖, kter茅 je mo啪n茅 zm臎nit pro\n"
-"dosa啪en铆 optim谩ln铆ho grafick茅ho zobrazen铆\n"
-"Grafick谩 karta\n"
-"\n"
-" Instala膷n铆 program je schopen automaticky detekovat a nastavit grafickou\n"
-"kartu instalovanou v po膷铆ta膷i. Pokud se to nepoda艡铆, m谩te mo啪nost si ze\n"
-"seznamu vybrat p艡铆slu拧nou grafickou kartu ru膷n臎.\n"
-"\n"
-" V p艡铆pad臎, 啪e pro va拧i kartu je mo啪n茅 pou啪铆t v铆ce r暖zn媒ch server暖, s 3D\n"
-"akcelerac铆 nebo bez, je pouze na v谩s, kter媒 server si vyberete jako nejv铆ce\n"
-"vyhovuj铆c铆 va拧im pot艡eb谩m.\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" Instala膷n铆 program dok谩啪e v臎t拧inou automaticky detekovat a spr谩vn臎 \n"
-"nastavit monitor p艡ipojen媒 k va拧emu po膷铆ta膷i. Pokud se to nezda艡铆, lze se\n"
-"seznamu vybrat monitor, kter媒 m谩te.\n"
-"\n"
-"\n"
-"Rozli拧en铆\n"
+"Klasick媒 postup p艡i 艡e拧en铆 probl茅m暖 se zvukem je pomoc铆 t臎chto p艡铆kaz暖:\n"
"\n"
-" Zde si m暖啪ete vybrat rozli拧en铆 a barevnou hloubku, kter茅 va拧e karta \n"
-"podporuje. Vyberte si to co v谩m nejv铆ce vyhovuje (v媒b臎r lze po instalaci\n"
-"samoz艡ejm臎 zm臎nit). Na monitoru bude zobrazena p艡铆klad nastaven铆.\n"
"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" v谩m 艡ekne, jak媒 ovlada膷 je v媒choz铆 pro\n"
+"danou zvukovou kartu\n"
"\n"
-"Test\n"
+"- \"grep sound-slot /etc/modules.conf\" v谩m 艡ekne, kter媒 ovlada膷 se nyn铆\n"
+"pou啪铆v谩\n"
"\n"
-" Syst茅m se pokus铆 otestovat grafickou obrazovku v po啪adovan茅m rozli拧en铆.\n"
-"Pokud b臎hem testu uvid铆te zpr谩vy a odpov铆te na ni \"Ano\", instala膷n铆 "
-"program\n"
-"bude pokra膷ovat dal拧铆m krokem. Pokud zpr谩vu neuvid铆te, znamen谩 to, 啪e "
-"n臎kter谩\n"
-"膷谩st automatick茅 detekce neprob臎hla v po艡谩dku a test automaticky za 12 "
-"vte艡in\n"
-"skon膷铆 s t铆m, 啪e se provede n谩vrat k z谩kladn铆 nab铆dce. N谩sledn臎 je mo啪n茅 "
-"op臎t\n"
-"prov茅st zm臎ny a啪 do t茅 doby, ne啪 bude zobrazeno spr谩vn茅 rozli拧en铆.\n"
+"- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovlada膷) je nahr谩n nebo "
+"ne\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" v谩m "
+"sd臎l铆\n"
+"zda je pro initlevel nastaveny slu啪by alsa a sound\n"
"\n"
-"Volby\n"
+"- \"aumix -q\" v谩m 艡ekne, zda je zvuk ztlumen nebo ne\n"
"\n"
-" Zde si m暖啪ete vybrat, zda chcete prov茅st automatick媒 start grafick茅ho\n"
-"prost艡ed铆 po spu拧t臎n铆 syst茅mu. Je samoz艡ejm茅, 啪e pokud bude po膷铆ta膷 "
-"provozov谩n\n"
-"jako server, je nutn茅 odpov臎d臎t \"Ne\"."
+"- \"/sbin/fuser -v /dev/dsp\" v谩m 艡ekne, kter媒 program pou啪铆v谩 zvukovou "
+"kartu.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Grafick谩 karta\n"
-"\n"
-" Instala膷n铆 program je schopen automaticky detekovat a nastavit grafickou\n"
-"kartu instalovanou v po膷铆ta膷i. Pokud se to nepoda艡铆, m谩te mo啪nost si ze\n"
-"seznamu vybrat p艡铆slu拧nou grafickou kartu ru膷n臎.\n"
+"Zku拧ebn铆 str谩nka(y) byla(y) posl谩na(y) na tisk谩rnu.\n"
+"M暖啪e chvilku trvat ne啪 za膷ne tisk.\n"
+"Stav tisku:\n"
+"%s\n"
"\n"
-" V p艡铆pad臎, 啪e pro va拧i kartu je mo啪n茅 pou啪铆t v铆ce r暖zn媒ch server暖, s 3D\n"
-"akcelerac铆 nebo bez, je pouze na v谩s, kter媒 server si vyberete jako nejv铆ce\n"
-"vyhovuj铆c铆 va拧im pot艡eb谩m."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux spravuje 膷as podle GMT (Greenwich Mean Time) a p艡ev谩d铆 ho na\n"
-"膷as podle p艡铆slu拧n茅 vybran茅 膷asov茅 z贸ny. Toto je mo啪n茅 zru拧it odzna膷en铆m\n"
-"volby \"Hodiny nastaveny na GMT\" a tak budou syst茅mov茅 hodiny stejn茅 jako\n"
-"hardwarov茅. To je u啪ite膷n茅 v p艡铆pad臎, 啪e je na po膷铆ta膷i jin媒 opera膷n铆 "
-"syst茅m\n"
-"typu Windows.\n"
-"\n"
-"Volba \"Automatick谩 synchronizace 膷asu\" prov谩d铆 automatick茅 nastaven铆 "
-"hodin\n"
-"pomoc铆 p艡ipojen铆 k 膷asov茅mu serveru na Internetu. Vyberte si v seznamu ten "
-"server,\n"
-"kter媒 je v谩m nejbl铆啪. Je samoz艡ejm茅, 啪e pro spr谩vnou funkci mus铆te m铆t "
-"funk膷n铆\n"
-"p艡ipojen铆 k Internetu. Na po膷铆ta膷 se tak茅 nainstaluje 膷asov媒 server, kter媒\n"
-"mohou voliteln臎 pou啪铆vat jin茅 po膷铆ta膷e ve va拧铆 lok谩ln铆 s铆ti."
+msgid "daily"
+msgstr "ka啪d媒 den"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nyn铆 si zvolte, kter茅 slu啪by maj铆 b媒t spu拧t臎ny p艡i startu po膷铆ta膷e.\n"
-"\n"
-"Je zde seznam v拧ech slu啪eb, kter茅 jsou aktu谩ln臎 nainstalov谩ny.\n"
-"Prohl茅dn臎te si seznam pozorn臎 a zru拧te ty, kter茅 nepot艡ebujete spou拧t臎t p艡i\n"
-"startu po膷铆ta膷e.\n"
-"\n"
-"Pokud p艡ejedete my拧铆 nad n臎kterou polo啪kou, objev铆 se mal谩 n谩pov臎da\n"
-"s popisem, co dan谩 slu啪ba d臎l谩. Pokud p艡esn臎 nev铆te, zda je slu啪ba u啪ite膷n谩\n"
-"nebo ne, je lep拧铆 ji nechat ve v媒choz铆m stavu.\n"
-"\n"
-"!! Rozva啪te, co za slu啪by spustit, zvl谩拧t臎 pokud budete po膷铆ta膷 provozovat\n"
-"jako server: nepot艡ebujete v拧echny slu啪by. Pamatujte, 啪e 膷铆m v铆ce slu啪eb\n"
-"je spu拧t臎no, t铆m je v臎t拧铆 nebezpe膷铆 ne啪谩douc铆ho proniknut铆 do po膷铆ta膷e.\n"
-"Tak啪e povolte opravdu jen ty slu啪by, kter茅 nezbytn臎 pot艡ebujete.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "a jedna nezn谩m谩 tisk谩rna"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Tisk谩rna\": klepnut铆m na \"Nastavit\" se otev艡e pr暖vodce nastaven铆m.\n"
-"Jak nastavit tisk谩rnu se tak茅 dozv铆te z odpov铆daj铆c铆 kapitoly z p艡铆ru膷ky\n"
-"\"Za膷铆n谩me\". Rozhran铆 je podobn茅 tomu, kter茅 vid铆te p艡i instalaci."
+msgid "Ireland"
+msgstr "Irsko"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "verze j谩dra"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid " Restore Configuration "
+msgstr " Obnovit nastaven铆 "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Je toto spr谩vn茅 nastaven铆?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2706,4600 +2483,4339 @@ msgstr ""
"nastavit\n"
"p艡ipojen铆 k s铆ti pozd臎ji po instalaci, klepn臎te na tla膷铆tko \"Zru拧it\"."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"V z谩vislosti na tom, zda jste zvolili individu谩ln铆 v媒b臎r bal铆膷k暖, se "
-"nab铆dne\n"
-"stromov谩 struktura obsahuj铆c铆 v拧echny bal铆膷ky organizovan茅 do skupin\n"
-"a podskupin. P艡i proch谩zen铆 stromu m暖啪ete vybrat jednotliv茅 bal铆膷ky, "
-"podskupiny\n"
-"nebo cel茅 skupiny.\n"
-"\n"
-"Pokud vyberete ze stromu bal铆膷ek, objev铆 se v prav茅 膷谩sti jeho popis.\n"
-"\n"
-"!! Pokud se nach谩z铆 mezi vybran媒mi bal铆膷ky serverov茅 programy, a钮 u啪 "
-"vybran茅\n"
-"z谩m臎rn臎 nebo jako sou膷谩st skupiny, zobraz铆 se dotaz na to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
-"jsou tyto servery spu拧t臎ny p艡i startu syst茅mu. I kdy啪 v dob臎 vyd谩n铆 "
-"distribuce\n"
-"nejsou zn谩my 啪谩dn茅 bezpe膷nostn铆 probl茅my, mohou se vyskytnout pozd臎ji.\n"
-"Pokud nev铆te, k 膷emu jsou ur膷eny n臎kter茅 serverov茅 slu啪by, klepn臎te na \"Ne"
-"\".\n"
-"Klepnut铆m na \"Ano\" se dan茅 slu啪by nainstaluj铆 a automaticky spust铆 p艡i "
-"startu !!\n"
-"\n"
-"Volba \"Automatick茅 z谩vislosti\" vypne varovn茅 hl谩拧en铆, kter茅 se objev铆\n"
-"v啪dy, kdy啪 vyberete bal铆膷ek, kter媒 m谩 dal拧铆 z谩vislosti a instala膷n铆 program\n"
-"mus铆 vybrat dal拧铆 pot艡ebn茅 bal铆膷ky, aby instalace mohla prob臎hnout 煤sp臎拧n臎.\n"
-"\n"
-"Mal谩 ikonka diskety dole umo啪艌uje nahr谩t ji啪 p艡edem vybran媒 seznam bal铆膷k暖.\n"
-"Po klepnut铆 na ikonu budete dot谩z谩ni na vlo啪en铆 diskety, kter谩 byla "
-"vytvo艡ena na\n"
-"konci jin茅 instalace. Ve druh茅m tipu p艡i posledn铆m kroku najdete n谩vod, jak "
-"si\n"
-"tuto disketu vytvo艡it. "
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"V t茅to chv铆li je mo啪n茅 vybrat, kter茅 programy chcete nainstalovat na v谩拧 "
-"syst茅m.\n"
-"Mandrake Linux obsahuje tis铆ce bal铆膷k暖 s programy a pro snadn臎j拧铆 orientaci\n"
-"byly rozd臎leny do skupin, kter茅 sdru啪uj铆 podobn茅 aplikace.\n"
-"\n"
-"Bal铆膷ky jsou rozd臎leny do skupin, kter茅 odpov铆daj铆 tomu, jak je nej膷ast臎ji\n"
-"po膷铆ta膷 pou啪铆v谩n. Skupiny samotn茅 jsou um铆st臎ny do 膷ty艡 sekc铆. V媒b臎r "
-"aplikac铆\n"
-"z t臎chto sekc铆 lze r暖zn臎 kombinovat, tak啪e m暖啪ete m铆t celou instalov谩nu "
-"sekci\n"
-"\"Pracovn铆 stanice\" a k n铆 n臎jak茅 aplikace ze sekce \"V媒voj\".\n"
-"\n"
-" * \"Pracovn铆 stanice\": pokud pl谩nujete pou啪铆vat po膷铆ta膷 p艡ev谩啪n臎 na\n"
-"b臎啪nou pr谩ci, vyberte si z dal拧铆ch skupin odpov铆daj铆c铆 bal铆膷ky.\n"
-"\n"
-" * \"V媒voj\": pokud budete na po膷铆ta膷i programovat, m暖啪ete si z t茅to\n"
-"sekce vybrat dal拧铆 skupiny.\n"
-"\n"
-" * \"Server\": pokud bude po膷铆ta膷 provozov谩n jako server, m谩te mo啪nost\n"
-"vybrat si ty nejb臎啪n臎j拧铆 slu啪by, kter茅 chcete nainstalovat.\n"
-"\n"
-" * \"Grafick谩 prost艡ed铆\": pokud preferujete grafick茅 prost艡ed铆, zde je\n"
-"nab铆dka n臎kolika prost艡ed铆, ze kter茅 si mus铆te vybrat nejm茅n臎 jedno,\n"
-"aby bylo mo啪n茅 grafick茅 prost艡ed铆 nainstalovat.\n"
-"\n"
-"Pokud p艡ejedete my拧铆 nad skupinou, objev铆 se kr谩tk媒 text, kter媒 vysv臎tluje,\n"
-"co je obsahem dan茅 skupiny. Pokud nevyberete p艡i instalaci 啪谩dnou skupinu,\n"
-"zobraz铆 se ot谩zka na instalaci n臎kolika typ暖 minim谩ln铆 instalace:\n"
-"\n"
-" * \"Podpora X\" Provede instalaci minim谩ln铆 podpory pro prost艡ed铆 X-"
-"Window.\n"
-"\n"
-" * \"Se z谩kladn铆 dokumentac铆\" Nainstaluje syst茅m se z谩kladn铆mi programy a\n"
-"jejich dokumentac铆. Tento typ je vhodn媒 pro instalaci serveru.\n"
-"\n"
-" * \"Minim谩ln铆 instalace\" Nainstaluje se opravdu nezbytn茅 minimum, aby "
-"bylo\n"
-"mo啪n茅 provozovat Linux z p艡铆kazov茅 艡谩dky. Instalace zabere asi 65MB.\n"
-"\n"
-"Pokud zatrhnete volbu \"Vlastn铆 v媒b臎r bal铆膷k暖\", zobraz铆 se seznam v拧ech\n"
-"bal铆膷k暖, kter茅 je mo啪no nainstalovat. To je to u啪ite膷n茅 v p艡铆pad臎, 啪e "
-"chcete\n"
-"m铆t absolutn铆 kontrolu nad t铆m, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v re啪imu \"Aktualizace\", m暖啪ete zru拧it v媒b臎r\n"
-"dan媒ch skupin, 膷铆m啪 zabr谩n铆te instalaci nov媒ch bal铆膷k暖. To je u啪ite膷n茅\n"
-"pro p艡铆pad opravy nebo aktualizace existuj铆c铆ho syst茅mu."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Distribuce Mandrake Linux je slo啪ena z n臎kolika CD. Instala膷n铆 program v铆,\n"
-"na kter茅m disku je um铆st臎n jak媒 soubor a v p艡铆pad臎 pot艡eby vysune CD a "
-"vy啪谩d谩\n"
-"si v媒m臎nu CD za po啪adovan茅."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Zde je vyps谩n seznam ji啪 existuj铆c铆ch detekovan媒ch odd铆l暖 na pevn茅m disku.\n"
-"M暖啪ete ponechat volby detekovan茅 pr暖vodcem, proto啪e ve v臎t拧in臎 p艡铆pad暖\n"
-"vyhovuj铆. Pokud chcete prov茅st n臎jak茅 zm臎ny, mus铆te definovat aspo艌 "
-"ko艡enov媒\n"
-"odd铆l (\"/\"). Velikost odd铆l暖 zvolte dostate膷nou, jinak nebude mo啪n茅 "
-"nainstalovat\n"
-"dostate膷n茅 mno啪stv铆 program暖. Pokud chcete ukl谩dat data na zvl谩拧tn铆 odd铆l,\n"
-"vytvo艡te tak茅 odd铆l \"/home\".\n"
-"\n"
-"Ka啪d媒 odd铆l vypsan媒 n铆啪e m谩: \"N谩zev\", \"Velikost\".\n"
-"\n"
-"\"N谩zev\" je slo啪en n谩sledovn臎: \"typ pevn茅ho disku\", \"膷铆slo disku\",\n"
-"\"膷铆slo odd铆lu\". (nap艡铆klad \"hda1\").\n"
-"\n"
-"Pokud m谩te IDE disky, pak je \"typ pevn茅ho disku\" \"hd\", pokud m谩te SCSI,\n"
-"ozna膷en铆 bude \"sd\".\n"
-"\n"
-"\"膶铆slo disku\" je v啪dy p铆smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamen谩 \"master disk na prim谩rn铆m IDE 艡adi膷i\",\n"
-"\n"
-" * \"b\" znamen谩 \"slave disk na prim谩rn铆m IDE 艡adi膷i\",\n"
-"\n"
-" * \"c\" znamen谩 \"master disk na sekund谩rn铆m IDE 艡adi膷i\",\n"
-"\n"
-" * \"d\" znamen谩 \"slave disk na sekund谩rn铆m IDE 艡adi膷i\".\n"
-"\n"
-"Pro SCSI disky plat铆, 啪e \"a\" je \"nejmen拧铆 SCSI ID\", \"b\" je \"druh茅\n"
-"nejmen拧铆 SCSI ID\" atd."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux je v铆ceu啪ivatelsk媒 syst茅m, co啪 znamen谩, 啪e ka啪d媒 u啪ivatel m暖啪e\n"
-"m铆t sv茅 vlastn铆 nastaven铆, soubory atd. V铆ce se do膷tete v p艡铆ru膷ce \"Za膷铆n谩me"
-"\".\n"
-"Na rozd铆l od u啪ivatele root, kter媒 je spr谩vcem po膷铆ta膷e, u啪ivatel茅, kte艡铆 "
-"jsou\n"
-"zde vytvo艡eni, nemaj铆 opr谩vn臎n铆 m臎nit nic krom臎 sv媒ch vlastn铆ch soubor暖 a\n"
-"nastaven铆. Doporu膷uje se vytvo艡it 煤膷et pro minim谩ln臎 jednoho b臎啪n茅ho "
-"u啪ivatele.\n"
-"Tento 煤膷et se pou啪铆v谩 na v拧echny b臎啪n茅 煤koly. A膷koliv je velmi praktick茅\n"
-"p艡ihla拧ovat se ka啪d媒 den jako u啪ivatel root, je to tak茅 velmi nebezpe膷n茅!\n"
-"Jedna mal谩 chyba m暖啪e zp暖sobit, 啪e cel媒 opera膷n铆 syst茅m ji啪 nebude funk膷n铆.\n"
-"Pokud ud臎l谩te chybu jako norm谩ln铆 u啪ivatel, m暖啪ete p艡ij铆t pouze o sv茅 "
-"informace,\n"
-"ale nepo拧kod铆 se cel媒 syst茅m.\n"
-"\n"
-"Jako prvn铆 zadejte va拧e skute膷n茅 jm茅no. To nen铆 samoz艡ejm臎 povinn茅 - m暖啪ete\n"
-"zadat co chcete. Aplikace DrakX pou啪ije prvn铆 slovo jako u啪ivatelsk茅 jm茅no,\n"
-"pod kter媒m se bude u啪ivatel hl谩sit do syst茅mu, a p艡edvypln铆 jej do pol铆膷ka\n"
-"\"U啪ivatelsk茅 jm茅no\". To je mo啪n茅 n谩sledn臎 zm臎nit.\n"
-"D谩le se zad谩v谩 heslo pro u啪ivatele. Volba hesla pro norm谩ln铆 u啪ivatele sice "
-"nen铆\n"
-"z hlediska bezpe膷nosti tak kritick谩 jako v p艡铆pad臎 spr谩vce, ale i tak se "
-"doporu膷uje\n"
-"ji nepodce艌ovat; koneckonc暖, jde o zabezpe膷en铆 soubor暖 tohoto u啪ivatele.\n"
-"\n"
-"Pokud klepnete na \"P艡idat u啪ivatele\", m暖啪ete p艡id谩vat u啪ivatel暖, kolik\n"
-"pot艡ebujete, nap艡. sv茅 p艡谩tele, 煤膷et pro otce 膷i sestru. Pokud m谩te v拧echny\n"
-"u啪ivatele vytvo艡eny, klepn臎te na tla膷铆tko \"Hotovo\". \n"
-"\n"
-"Klepnut铆m na tla膷铆tko \"Roz拧铆艡en茅\" m暖啪ete pro nov媒 煤膷et zm臎nit shell, "
-"kter媒\n"
-"bude u啪ivatel pou啪铆vat (v媒choz铆 je bash)."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"P艡edt铆m, ne啪 budete pokra膷ovat, p艡e膷t臎te si pozorn臎 podm铆nky licence. Ty\n"
-"se vztahuj铆 k cel茅 distribuci Mandrake Linux a pokud s nimi nesouhlas铆te,\n"
-"klepn臎te na tla膷铆tko \"Odm铆tnout\". Instalace ihned skon膷铆. Pokud chcete "
-"pokra膷ovat\n"
-"v instalaci, klepn臎te na tla膷铆tko \"P艡ijmout\"."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Mus铆te tak茅 naform谩tovat %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nelze na膷铆st moduly pro j谩dro odpov铆daj铆c铆 instalovan茅mu j谩dru (chyb铆 "
-"soubor\n"
-"%s), co啪 obecn臎 znamen谩, 啪e spou拧t臎c铆 disketa nem谩 j谩dro stejn茅 jako m谩 "
-"instala膷n铆 m茅dium (vytvo艡te pros铆m novou spou拧t臎c铆 disketu)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno 啪谩dn茅 za艡铆zen铆 na kter茅m by se daly "
-"vytvo艡it nov茅 souborov茅 syst茅my. Zkontrolujte pros铆m hardware"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba p艡i 膷ten铆 souboru %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pokud chcete pou啪铆t ulo啪en媒 v媒b臎r bal铆膷k暖, spus钮te instalaci takto: 'linux "
-"defcfg=floppy'"
+msgid "Wizard Configuration"
+msgstr "Pr暖vodce konfigurac铆"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Tato disketa nen铆 form谩tov谩na"
+msgid "Autoprobe"
+msgstr "Automatick茅 prozkoum谩n铆"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo啪te naform谩tovanou disketu do %s"
+msgid "Backup system files..."
+msgstr "Z谩lohovat syst茅mov茅 soubory..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Nelze pou啪铆t v拧esm臎rov茅 vys铆l谩n铆 bez NIS dom茅ny"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"N谩sleduj铆c铆 bal铆膷ky budou odebr谩ny pro umo啪n臎n铆 aktualizace syst茅mu: %s\n"
-"\n"
-"\n"
-"Opravdu chcete odebrat tyto bal铆膷ky?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Ne"
+msgid "Removing printer \"%s\"..."
+msgstr "Odeb铆r谩m tisk谩rnu \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Ano"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Vybrali jste pro instalaci n谩sleduj铆c铆 server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardn臎 aktivov谩ny. P艡esto啪e nen铆 zn谩m媒 啪谩dn媒\n"
-"bezpe膷nostn铆 probl茅m, mohou se p艡esto vyskytnout. Je proto d暖le啪it茅 "
-"aktualizovat\n"
-"v啪dy, kdy啪 je to pot艡eba.\n"
+"Ur膷ete, kde je um铆st臎n soubor auto_install.cfg.\n"
"\n"
+"Ponechte pr谩zdn茅, pokud nechcete pou啪铆t re啪im automatick茅 instalace.\n"
"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Konfigurace syst茅mu"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Instalace syst茅mu"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Zastavuji s铆钮"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "脷rove艌, kterou lze z铆skat po proveden铆 instrukce cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Startuji s铆钮"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Vytv谩艡en铆 diskov媒ch odd铆l暖 selhalo: %s"
+msgid " on device: %s"
+msgstr " na za艡铆zen铆: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Pr暖vodce DrakX na拧el n谩sleduj铆c铆 艡e拧en铆:"
+msgid "Remove Windows(TM)"
+msgstr "Odstranit Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Nem暖啪u naj铆t 啪谩dn茅 voln茅 m铆sto pro instalaci"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Startuje X Font Server (to je nezbytn茅 pro b臎h XFree)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Nyn铆 m暖啪ete rozd臎lit v谩拧 pevn媒 disk %s.\n"
-"A啪 skon膷铆te, nezapome艌te ulo啪it zm臎ny pomoc铆 'w'"
+"V臎t拧ina t臎chto 煤daj暖 byla z铆sk谩na z va拧eho\n"
+"b臎啪铆c铆ho syst茅mu. M暖啪ete je upravit dle pot艡eby"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Pou啪铆t fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Vyberte soubor s fontem nebo adres谩艡 a klepn臎te na 'P艡idat'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Vlastn铆 rozd臎len铆 disku"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V艩ECHNY diskov茅 odd铆ly a data na disku %s budou zru拧ena"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "M谩te v铆ce ne啪 jeden pevn媒 disk, na kter媒 chcete instalovat Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Slu啪by cronu nejsou zat铆m pro b臎啪n茅 u啪ivatele dostupn茅."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Smazat cel媒 disk"
+msgid "System"
+msgstr "Syst茅m"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Chcete pou啪铆t tuto vlastnost?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Nejsou zde 啪谩dn茅 FAT odd铆ly, kter茅 by bylo mo啪n茅 zm臎nit (nebo nen铆 dostatek "
-"m铆sta)"
+msgid "Arabic"
+msgstr "Arabsk茅"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Pro zachov谩n铆 integrity po proveden茅 zm臎n臎 velikosti odd铆lu(暖) bude p艡i\n"
-"dal拧铆m spu拧t臎n铆 syst茅mu Windows provedena kontrola souborov茅ho syst茅mu."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zm臎na FAT odd铆lu neusp臎la: %s"
+"\n"
+"- Volby:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Po膷铆t谩m hranice souborov茅ho syst茅mu s Windows"
+msgid "Password required"
+msgstr "Vy啪adov谩no heslo"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "M臎n铆m velikost"
+msgid "%d minutes"
+msgstr "%d minut(y)"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "diskov茅m odd铆lu %s"
+msgid "Graphics card: %s"
+msgstr "Grafick谩 karta: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Jakou velikost odd铆lu chcete nechat pro Windows na"
+msgid "WebDAV transfer failed!"
+msgstr "P艡enos protokolem WebDAV selhal!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROV脕N脥!\n"
-"\n"
-"DrakX nyn铆 mus铆 zmen拧it odd铆l s Windows. Bu膹te opatrn铆: tato operace je\n"
-"nebezpe膷n谩. Pokud jste tak ji啪 neu膷inili, m臎li byste nejprve ukon膷it "
-"instalaci,\n"
-"spustit scandisk ve Windows (pop艡铆pad臎 i defrag) a potom instalaci znovu "
-"spustit\n"
-"Tak茅 byste si m臎li data z谩lohovat. A啪 si budete jist铆, 啪e chcete pokra膷ovat\n"
-"stiskn臎te Ok."
+msgid "XFree configuration"
+msgstr "Nastaven铆 XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"V谩拧 diskov媒 odd铆l s Windows je p艡铆li拧 fragmentov谩n. Restartujte po膷铆ta膷 do "
-"syst茅mu Windows, pou啪ijte program 'defrag' a potom spus钮te op臎t instalaci."
+msgid "Choose action"
+msgstr "Co ud臎l谩te ?"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Po膷铆t谩m voln茅 m铆sto na Windows odd铆lu"
+msgid "French Polynesia"
+msgstr "Francouzsk谩 Polyn茅sie"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"Zm臎nu velikost FAT nen铆 mo啪n茅 prov茅st, \n"
-"vyskytla se n谩sleduj铆c铆 chyba: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Na kter茅m odd铆lu chcete m臎nit velikost?"
+"Aplikace DrakX obvykle zjist铆 po膷et tla膷铆tek na va拧铆 my拧i. Pokud ne, "
+"p艡edpokl谩d谩,\n"
+"啪e m谩te dvoutla膷铆tkovou my拧 a nastav铆 emulaci pro t艡et铆 tla膷铆tko my拧i. "
+"Aplikace\n"
+"tak茅 um铆 rozpoznat, zda se jedn谩 o my拧 PS/2, USB nebo s茅riovou.\n"
+"\n"
+"Pokud chcete zadat jin媒 typ my拧i, vyberte odpov铆daj铆c铆 typ se seznamu.\n"
+"\n"
+"Pokud vyberete jinou my拧 ne啪 ta, kter谩 byla detekov谩na, zobraz铆 se "
+"testovac铆\n"
+"obrazovka. Zde otestujte jak tla膷铆tka tak i kole膷ko a ov臎艡te, zda je "
+"nastaven铆\n"
+"spr谩vn茅. Pokud my拧 nepracuje spr谩vn臎, stiskn臎te mezern铆k nebo kl谩vesu Enter\n"
+"na \"Zru拧it\"\n"
+" a vyberte jin媒 typ.\n"
+"\n"
+"My拧i s kole膷kem nejsou v n臎kter媒ch p艡铆padech automaticky rozpozn谩ny. Budete\n"
+"je muset vybrat ze seznamu. Ujist臎te se, 啪e vyberete my拧 s odpov铆daj铆c铆m "
+"typem\n"
+"portu, ke kter茅mu je p艡ipojen谩. Pot茅, co stisknete tla膷铆tko \"D谩le ->\", \n"
+"zobraz铆 se obr谩zek s my拧铆. Aby se spr谩vn臎 kole膷ko aktivovalo, mus铆te "
+"pohybovat\n"
+"kole膷kem va拧铆 my拧i.\n"
+"Pot茅 ov臎艡te, zda-li je spr谩vn茅 nastaven铆 tla膷铆tek a pohybu va拧铆 my拧i."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Pou啪铆t voln茅 m铆sto na Windows odd铆lu"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Podpora pro OKI 4w a kompatibiln铆 wintisk谩rny."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Nejsou zde 啪谩dn茅 FAT odd铆ly, kter茅 by bylo pou啪铆t pro loopback (nebo nen铆 "
-"dostatek m铆sta)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Spustit zvukov媒 syst茅m ALSA (Advanced Linux Sound Architecture)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Velikost odkl谩dac铆ho odd铆lu v MB: "
+msgid "Installing driver for %s card %s"
+msgstr "Instaluji ovlada膷 pro %s kartu %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Velikost ko艡enov茅ho odd铆lu v MB:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Byla p艡enesena v媒choz铆 tisk谩rna (\"%s\"). M谩 se nastavit jako v媒choz铆 tak茅 "
+"na vzd谩len茅m tiskov茅m syst茅mu %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
+msgid "Enable Server"
+msgstr "Zapnout server"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kter媒 diskov媒 odd铆l chcete pou啪铆t pro Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrajinsk茅"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Pou啪铆t Windows odd铆l jako loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"S铆钮 nefunguje a nelze ji spustit. Pros铆m zkontrolujte nastaven铆 hardware. "
+"Pak se op臎t pokuste prov茅st nastaven铆 vzd谩len茅 tisk谩rny."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nen铆 zde 啪谩dn媒 existuj铆c铆 odd铆l k pou啪it铆"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Vlo啪te pros铆m spou拧t臎c铆 disketu do %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Pou啪铆t existuj铆c铆 odd铆l"
+msgid "Local network(s)"
+msgstr "Lok谩ln铆 s铆钮(臎)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nen铆 dostatek m铆sta pro vytvo艡en铆 nov茅ho diskov茅ho odd铆lu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Odstranit Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Pou啪铆t voln茅 m铆sto"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"V谩拧 skener %s byl nastaven.\n"
+"Nyn铆 lze skenovat dokumenty pomoc铆 aplikace \"XSane\" z nab铆dky aplikac铆 "
+"Multim茅dia/Grafika."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Mus铆te m铆t FAT odd铆l p艡ipojen媒 na /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire kontrol茅ry"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Nem谩te odkl谩dac铆 odd铆l\n"
+"Po nastaven铆 obecn媒ch parametr暖 zavad臎膷e syst茅mu bude k dispozici\n"
+"seznam voleb pro zav谩d臎n铆, kter媒 se zobraz铆 p艡i zav谩d臎n铆 syst茅mu.\n"
"\n"
-"Chcete p艡esto pokra膷ovat?"
+"Pokud ji啪 m谩te na po膷铆ta膷i jin媒 opera膷n铆 syst茅m, automaticky bude za艡azen "
+"do\n"
+"nab铆dky pro spou拧t臎n铆. Zde je mo啪n茅 d谩le doladit volby, kter茅 se p艡ed谩vaj铆 "
+"t铆m,\n"
+"啪e na danou nab铆dkou vyberete a klepnete na tla膷铆tko \"Upravit\", pokud jej "
+"chcete\n"
+"upravit, \"Odstranit\" pou啪ijte pro odebr谩n铆 a \"P艡idat\" pou啪ijte pokud "
+"chcete\n"
+"vytvo艡it novou polo啪ku.\n"
+"K dal拧铆mu kroku se dostanete klepnut铆m na tla膷铆tko \"Hotovo\".\n"
+"\n"
+"Pokud nechcete umo啪nit p艡铆stup k t臎mto opera膷n铆m syst茅m暖m komukoliv, m暖啪ete\n"
+"je z nab铆dky odstranit smaz谩n铆m odpov铆daj铆c铆ch polo啪ek.. V tom p艡铆pad臎 ale\n"
+"mus铆te m铆t spou拧t臎c铆 disketu, ze kter茅 je mo啪n茅 tento opera膷n铆 syst茅m "
+"spustit!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Mus铆te m铆t ko艡enov媒 odd铆l.\n"
-"K jeho vytvo艡en铆 mus铆te zvolit jeden existuj铆c铆 odd铆l\n"
-"(nebo vytvo艡it nov媒), zvolit 'P艡铆pojn媒 bod'\n"
-"a nastavit ho na '/'"
+msgid "System mode"
+msgstr "Syst茅mov媒 re啪im"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"N臎kter谩 膷谩st va拧eho hardware pot艡ebuje 'speci谩ln铆' ovlada膷e, aby mohla "
-"pracovat.\n"
-"Dal拧铆 informace m暖啪ete nal茅zt na: %s"
+"Abyste mohli tisknout na NetWare tisk谩rn臎, mus铆te zadat n谩zev NetWare "
+"serveru (Pozor! To m暖啪e b媒t odli拧n茅 od jeho n谩zvu pro TCP/IP!), n谩zev "
+"tiskov茅 fronty tisk谩rny, kterou chcete pou啪铆vat, u啪ivatelsk茅 jm茅no a heslo."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme v谩m, instalace je dokon膷ena.\n"
-"Vyjm臎te startovac铆 m茅dia a stiskn臎te Return pro restart.\n"
-"\n"
-"\n"
-"Na opravy t茅to instalace syst茅mu Mandrake Linux se lze informovat\n"
-"na str谩nce Errata:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informace o konfiguraci syst茅mu po instalaci jsou dostupn茅\n"
-"v dan茅 kapitole ofici谩ln铆 u啪ivatelsk茅 p艡铆ru膷ky pro Mandrake Linux."
+msgid "Netmask:"
+msgstr "Maska s铆t臎:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "P艡ipojit"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Obnovit seznam tisk谩ren (pro z铆sk谩n铆 v拧ech vzd谩len媒ch CUPS tisk谩ren)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Pokud je tato volba zvolena, pak je p艡i ka啪d茅m startu CUPS d茅mona "
+"automaticky zaji拧t臎no 啪e\n"
"\n"
-"Varov谩n铆\n"
-"\n"
-"P艡e膷t臎te si pros铆m pozorn臎 n谩sleduj铆c铆 term铆ny. Pokud s nimi nesouhlas铆te,\n"
-"nejste opr谩vn臎n pokra膷ovat v instalaci n谩sleduj铆c铆m CD. Stiskn臎te\n"
-"\"Odm铆tnout\" pro pokra膷ov谩n铆 v instalaci bez tohoto m茅dia.\n"
-"\n"
+"- pokud je nainstalov谩n LPD/LPRng, nebude CUPS p艡episovat /etc/printcap\n"
"\n"
-"N臎kter茅 programy na dal拧铆m CD m茅diu nejsou 拧铆艡eny podle licence GPL 膷i\n"
-"podobn茅. Ka啪d媒 z t臎chto program暖 je 拧铆艡en podle vlastn铆 licence a podm铆nek.\n"
-"膶tete pozorn臎 tyto licence a podm铆nky p艡ed t铆m, ne啪 za膷nete dan媒 software\n"
-"pou啪铆vat nebo 拧铆艡it.\n"
-"N臎kter茅 licence zakazuj铆 p艡en谩拧en铆, vytv谩艡en铆 duplik谩t暖 (mimo z谩lo啪n铆 "
-"kopii),\n"
-"dal拧铆 拧铆艡en铆, dekompilaci, reverzn铆 engineering nebo modifikaci komponent.\n"
-"Ka啪d茅 poru拧en铆 podm铆nek okam啪it臎 p艡eru拧uje va拧e pr谩va podle dan茅 licence.\n"
-"I kdy啪 dan茅 licence d谩vaj铆 n臎jak谩 pr谩va, nen铆 dovoleno instalovat dan媒\n"
-"program na v铆ce syst茅m暖, p艡izp暖sobovat ho provozu na s铆ti. V p艡铆pad臎\n"
-"pochybnost铆 kontaktujte distributora nebo v媒robce dan茅ho programu.\n"
-"P艡enech谩n铆 pr谩v t艡et铆m osob谩m nebo kop铆rov谩n铆 膷谩sti komponent 膷i\n"
-"dokumentace je tak茅 zak谩z谩no.\n"
+"- pokud chyb铆 soubor /etc/cups/cupsd.conf, tak bude vytvo艡en\n"
"\n"
+"- pokud jsou rozes铆l谩ny informace do s铆t臎, nebudou obsahovat v n谩zvu serveru "
+"\"localhost\".\n"
"\n"
-"V拧echna pr谩va na programy na dal拧铆m CD m茅diu pat艡铆 jej铆m pr谩voplatn媒m\n"
-"vlastn铆k暖m podle autorsk茅ho z谩kona.\n"
+"Pokud n臎kter谩 volba zp暖sobuje probl茅my, vypn臎te tuto volbu, ale potom si na "
+"tyto zm铆n臎n茅 body mus铆te d谩vat pozor."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"脷vod\n"
-"\n"
-"Opera膷n铆 syst茅m a r暖zn茅 膷谩sti dostupn茅 v distribuci Mandrake Linux jsou "
-"naz媒v谩ny \"Softwarov茅 produkty\" (\"Software Products\"). Softwarov茅 "
-"produkty zahrnuj铆, ale nejsou omezeny, na programy, metody, pravidla a "
-"dokumentaci, vztahuj铆c铆 se k opera膷n铆mu syst茅mu a dal拧铆m komponent谩m "
-"distribuce Mandrake Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Source Sound) bylo prvn铆 API pro zvuk. Nen铆 to API nez谩visl茅 na OS "
+"(je dostupn茅 ve v铆ce unixov媒ch syst茅mech), ale m谩 pouze z谩kladn铆 funkce a "
+"omezen茅 API.\n"
+"A co v铆ce, v拧echny OSS ovlada膷e \"vynal茅zaj铆 znovu kolo\".\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) je modul谩rn铆 architektura, kter谩 "
+"kter谩 podporuje daleko v铆ce ISA, USB a PCI karet.\n"
"\n"
-"5. Governing Laws \n"
+"Tak茅 poskytuje daleko lep拧铆 API ne啪 OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Za膷铆n谩m '%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "N谩pov臎da"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "nenastaveno"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Nastavit"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "P艡esto pokra膷ovat?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba p艡i instalaci bal铆膷k暖:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba p艡i 艡azen铆 bal铆膷k暖:"
+"Pokud chcete pou啪铆t alsa ovlada膷e, m暖啪ete pou啪铆t dva re啪imy:\n"
+"- star拧铆 re啪im kompatibility s OSS API\n"
+"- nov茅 ALSA API, kter茅 poskytuje daleko v铆ce mo啪nost铆, ale vy啪aduje pou啪铆t "
+"knihovnu ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Vym臎艌te pros铆m CD!\n"
-"\n"
-"Pros铆m vlo啪te CD ozna膷en茅 \"%s\" do mechaniky a stiskn臎te Ok.\n"
+"Instalace m暖啪e b媒t v p艡铆pad臎 pot艡eby pln臎 automatick谩,\n"
+"ale pou啪ije se cel媒 disk!!!\n"
+"(v p艡铆pad臎 instalace na druh媒 po膷铆ta膷)\n"
"\n"
-"Pokud toto CD nem谩te, stiskn臎te Zru拧it a toto CD nebude nainstalov谩no."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Odm铆tnout"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "P艡ijmout"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji bal铆膷ek %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d bal铆膷k暖(y)"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Bez detail暖"
+"Takto lze jednodu拧e zopakovat instalaci.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detaily"
+msgid "Network printer \"%s\", port %s"
+msgstr "S铆钮ov谩 tisk谩rna \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "膶ekejte pros铆m, p艡ipravuji instalaci"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Pros铆m zvolte si, ke kter茅mu s铆钮ov茅mu adapt茅ru bude p艡ipojena LAN."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Zb媒vaj铆c铆 膷as "
+msgid "OK to restore the other files."
+msgstr "Obnovit tak茅 ostatn铆 soubory."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Odhaduji"
+msgid "Please choose your keyboard layout."
+msgstr "Vyberte si rozlo啪en铆 va拧铆 kl谩vesnice."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instaluji"
+msgid "Printer Device URI"
+msgstr "URI Tiskov茅ho Za艡铆zen铆"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si bal铆膷ky, kter茅 chcete nainstalovat"
+msgid "Not erasable media!"
+msgstr "Toto nen铆 p艡episovateln茅 m茅dium!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Minim谩ln铆 instalace"
+msgid "Terminal-based"
+msgstr "Pomoc铆 termin谩lu"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Aktualizuji v媒b臎r bal铆膷k暖"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instaluji tiskov媒 syst茅m v bezpe膷nostn铆 煤rovni %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Ulo啪it/Nahr谩t na/z disketu/y"
+msgid "The user name is too long"
+msgstr "Toto u啪ivatelsk茅 jm茅no je p艡铆li拧 dlouh茅"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Zp臎t"
+msgid "Other OS (windows...)"
+msgstr "Jin媒 syst茅m (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalace"
+msgid "WebDAV remote site already in sync!"
+msgstr "Vzd谩len谩 m铆sto je ji啪 protokolem WebDAV synchronizov谩no!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Uk谩zat automaticky vybran茅 bal铆膷ky"
+msgid "Reading printer database..."
+msgstr "Na膷铆t谩m datab谩zi tisk谩ren ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tento bal铆膷ek mus铆 b媒t obnoven, nem暖啪ete ho nezvolit"
+msgid "Generate auto install floppy"
+msgstr "Vytvo艡it disketu pro automatickou instalaci"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Tento bal铆膷ek mus铆 b媒t obnoven\n"
-"Jste si jisti, 啪e ho nechcete zvolit?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nem暖啪ete od-ozna膷it tento bal铆膷ek, proto啪e je u啪 nainstalovan媒"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je nepostradateln媒 bal铆膷ek, nem暖啪e b媒t odstran臎n"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Nem暖啪ete vybrat/nevybrat tento bal铆膷ek"
+"\t\t u啪ivatelsk茅 jm茅no: %s\n"
+"\t\t cesta: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Tyto bal铆膷ky budou odebr谩ny"
+msgid "Somalia"
+msgstr "Som谩lsko"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Tyto bal铆膷ky budou instalov谩ny"
+msgid "No open source driver"
+msgstr "Nen铆 dostupn媒 啪谩dn媒 open source ovlada膷"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Nem暖啪ete ozna膷it tento bal铆膷ek, proto啪e pro jeho instalaci nen铆 dost m铆sta"
+"Tato 煤rove艌 m谩 vlastnosti p艡edchoz铆 煤rovn臎, ale syst茅m je 煤pln臎 uzav艡en.\n"
+"Zabezpe膷en铆 je nastaveno na maximum."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "D暖le啪itost: %s\n"
+msgid "Nicaragua"
+msgstr "Nikaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d kB\n"
+msgid "New Caledonia"
+msgstr "Nov谩 Kaledonie"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Verze: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Evropsk媒 protokol (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Jm茅no: %s\n"
+msgid "Video mode"
+msgstr "Textov媒 re啪im"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "艩patn媒 bal铆膷ek"
+msgid "Please enter your email address below "
+msgstr "Zadejte pros铆m n铆啪e svou po拧tovn铆 adresu "
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Dal拧铆"
+msgid "Oman"
+msgstr "Om谩n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celkov谩 velikost: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "Monitorov谩n铆 s铆t臎"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "D谩le ->"
+msgid "SunOS"
+msgstr "SunOs"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "V媒b臎r jednotliv媒ch bal铆膷k暖"
+msgid "New size in MB: "
+msgstr "Nov谩 velikost v MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "V媒b臎r skupiny bal铆膷k暖"
+msgid "Partition table type: %s\n"
+msgstr "Typ tabulky odd铆l暖: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"V谩拧 syst茅m m谩 m谩lo syst茅mov媒ch prost艡edk暖. P艡i instalaci Mandrake Linuxu se\n"
-"m暖啪ete setkat s r暖zn媒mi probl茅my. Pokud se tak stane, zkuste textovou\n"
-"verzi instala膷n铆ho programu. Ta se spou拧t铆 tak, 啪e p艡i startu\n"
-"z CD mechaniky stisknete 'F1' a pot茅 nap铆拧ete 'text'."
+msgid "Authentication Windows Domain"
+msgstr "Dom茅na Windows pro ov臎艡en铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Ulo啪it v媒b臎r jednotliv媒ch bal铆膷k暖"
+msgid "US keyboard"
+msgstr "US-Americk茅"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automaticky"
+msgid "Buttons emulation"
+msgstr "Emulace tla膷铆tek"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Zopakovat"
+msgid ", network printer \"%s\", port %s"
+msgstr ", s铆钮ov谩 tisk谩rna \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Instalace m暖啪e b媒t v p艡铆pad臎 pot艡eby pln臎 automatick谩,\n"
-"ale pou啪ije se cel媒 disk!!!\n"
-"(v p艡铆pad臎 instalace na druh媒 po膷铆ta膷)\n"
"\n"
-"Takto lze jednodu拧e zopakovat instalaci.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Vytvo艡it disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Restartovat"
+"Aktivity programu DrakBackup skrze p谩sku:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"N臎kter茅 kroky nebyly dokon膷eny.\n"
"\n"
-"Chcete opravdu nyn铆 skon膷it?"
+" Probl茅my FTP spojen铆: Nebylo mo啪n茅 poslat va拧e soubory se z谩lohou p艡es "
+"FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Vytv谩艡铆m disketu pro automatickou instalaci"
+msgid "Sending Speed:"
+msgstr "Odchoz铆 rychlost:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo啪te pr谩zdnou disketu do %s"
+msgid "Halt bug"
+msgstr "Halt chyba"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"M暖啪ete pot艡ebovat zm臎nit startovac铆 za艡铆zen铆 pro Open Firmware\n"
-" pro aktivaci spou拧t臎c铆ho programu. Pokud nevid铆te po spu拧t臎n铆 prompt,\n"
-" stiskn臎te p艡i startu Command-Option-O-F a zadejte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"P艡i dal拧铆m spu拧t臎n铆 u啪 uvid铆te prompt."
+msgid "Mail alert configuration"
+msgstr "Nastaven铆 varovn媒ch zpr谩v e-mailem"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalace zav谩d臎c铆ho programu neusp臎la. Stala se tato chyba:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Instaluji zav谩d臎c铆 program"
+msgid "Bosnian"
+msgstr "Bosensk茅"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba p艡i instalaci aboot,\n"
-"m谩m se pokusit o instalaci i kdy啪 to zru拧铆 prvn铆 odd铆l na disku?"
+msgid "Release: "
+msgstr "Verze: "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou啪铆t aboot?"
+msgid "Connection speed"
+msgstr "Rychlost p艡ipojen铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Zd谩 se, 啪e m谩te n臎jak媒 nezn谩m媒 po膷铆ta膷,\n"
-"na kter茅m nebude Yaboot pracovat.\n"
-"Instalace bude pokra膷ovat, ale budete\n"
-"pot艡ebovat BootX pro spu拧t臎n铆 syst茅mu."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "P艡ipravuji zav谩d臎c铆 program"
+"Zadejte n谩zev va拧铆 vypalova膷ky CD\n"
+" nap艡.: 1,0,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Heslo Spr谩vce dom茅ny"
+msgid "Namibia"
+msgstr "Namibie"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "U啪ivatelsk茅 jm茅no Spr谩vce dom茅ny"
+msgid "Database Server"
+msgstr "Datab谩zov茅 servery"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Dom茅na Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"speci谩ln铆 schopnosti za艡铆zen铆 (schopnost vypalov谩n铆 a/nebo podpora DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dom茅na Windows pro ov臎艡en铆"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Nem暖啪u p艡idat odd铆l do _naform谩tovan茅ho_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Aby toto spr谩vn臎 pracovalo se serverem W2K PDC, bude muset spr谩vce serveru "
-"spustit: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
-"everyone / add a restartovat server.\n"
-"Budete tak茅 pot艡ebovat u啪ivatelsk茅 jm茅no a heslo Spr谩vce Dom茅ny, abyste "
-"mohli p艡ipojit po膷铆ta膷 do dom茅ny Windows(TM).\n"
-"Jestli啪e je拧t臎 nen铆 povolena s铆钮, aplikace DrakX se pokus铆 p艡ipojit k dom茅n臎 "
-"po f谩zi nastaven铆 s铆t臎.\n"
-"Pakli啪e toto nastaven铆 z jak茅hokoli d暖vodu sel啪e, a ov臎艡en铆 na PDC nebude "
-"pracovat spr谩vn臎, spus钮te po nab臎hnut铆 syst茅mu 'smbpasswd -j DOMAIN -U USER%%"
-"PASSWORD' (pou啪ijte svou dom茅nu Windows(TM) a u啪ivatelsk茅 jm茅no a heslo "
-"Spr谩vce dom茅ny).\n"
-"P艡铆kaz 'wbinfo -t' otestuje, zda-li va拧e tajn茅 informace pro ov臎艡en铆 jsou "
-"spr谩vn茅."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS Dom茅na"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Ov臎艡en铆 pomoc铆 NIS"
+"Va拧e karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
+"TOTO JE POUZE EXPERIMENT脕LN脥 VERZE, A M女沤E V脡ST K NESTABILIT臍 SYST脡MU.\n"
+"Va拧e karta je podporov谩na i v XFree %s, kde m暖啪e m铆t lep拧铆 podporu pro 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "膶ekejte pros铆m, nastavuji volby zabezpe膷en铆..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Nezn谩m谩|CPH05X (bt878) [v铆ce dodavatel暖]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "Z谩kladn铆 dn pro LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Spustit grafick茅 prost艡ed铆 p艡i startu syst茅mu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Ov臎艡en铆 pomoc铆 LDAP"
+msgid "hourly"
+msgstr "ka啪dou hodinu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " 煤sp臎拧n臎 obnovena na %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lok谩ln铆 soubory"
+msgid "Making printer port available for CUPS..."
+msgstr "Nastavuji tiskov媒 port vyu啪iteln媒 pro CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Ov臎艡en铆"
+msgid "Antigua and Barbuda"
+msgstr "Antigua a Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Toto heslo je p艡铆li拧 jednoduch茅 (mus铆 b媒t alespo艌 %d znak暖 dlouh茅)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! Signalizuje, 啪e heslo v datab谩zi je jin茅 ne啪 kter茅 m谩 v datab谩zi\n"
+"Terminal Server.\n"
+"Sma啪te/znovu p艡idejte u啪ivatele pro povolen铆 p艡ihl谩拧en铆 na Terminal Server."
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password"
-msgstr "Bez hesla"
+msgid "Spanish"
+msgstr "艩pan臎lsk茅"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Hlavn铆(root) heslo"
+msgid "Start"
+msgstr "Start"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Nem谩te nastaveno X. Opravdu je pot艡ebujete?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" Povol铆/Zak谩啪e kontrolu na nastaven铆 promiskuitn铆ho re啪imu s铆钮ov茅ho rozhran铆."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Slu啪by: aktivov谩no %d z %d registrovan媒ch"
+msgid "Configuring applications..."
+msgstr "Nastavov谩n铆 aplikac铆..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Services"
-msgstr "Slu啪by"
+msgid "Normal modem connection"
+msgstr "Modemov茅 p艡ipojen铆"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "System"
-msgstr "Syst茅m"
+msgid "File Selection"
+msgstr "V媒b臎r souboru"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "%s on %s"
-msgstr "%s na %s"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Kterou ISDN konfiguraci preferujete?\n"
+"\n"
+"* Starou, pou啪itou pro isd4net. Ta obsahuje v媒konn茅 n谩stroje,\n"
+" ale je choulostiv谩 na konfiguraci a nen铆 standardn铆.\n"
+"\n"
+"* Novou konfiguraci, snaz拧铆 pro porozum臎n铆, v铆ce standardn铆,\n"
+" ale s m茅n臎 n谩stroji.\n"
+"\n"
+"Doporu膷ujeme vybrat si snaz拧铆 novou konfiguraci.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Zav谩d臎c铆 program"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Boot"
-msgstr "Spu拧t臎n铆"
+msgid "Run config tool"
+msgstr "Spustit n谩stroj pro nastaven铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "disabled"
-msgstr "vypnuto"
+msgid "Bootloader installation"
+msgstr "Instalace zav谩d臎c铆ho programu"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "activated"
-msgstr "aktivov谩no"
+msgid "Root partition size in MB: "
+msgstr "Velikost ko艡enov茅ho odd铆lu v MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Firewall"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Toto je nepostradateln媒 bal铆膷ek, nem暖啪e b媒t odstran臎n"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security"
-msgstr "Bezpe膷nost"
+msgid "Etherboot ISO image is %s"
+msgstr "ISO image pro Etherboot je %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Security Level"
-msgstr "脷rove艌 zabezpe膷en铆"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) je dom茅nov媒 (DNS) server, kter媒 p艡ekl谩d谩 hostitelsk谩 jm茅na na "
+"IP adresy."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network"
-msgstr "S铆钮"
+msgid "Disconnect..."
+msgstr "Odpojit..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "S铆钮 & Internet"
+msgid "Saint Lucia"
+msgstr "Svat谩 Lucie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafick茅 rozhran铆"
+msgid "Report"
+msgstr "Hl谩拧en铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV karta"
+msgid "level"
+msgstr "煤rove艌"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Nebyla nalezena zvukov谩 karta. Zkuste spustit po instalaci \"harddrake\"."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Pro nastaven铆 zvukov茅 karty spus钮te po instalaci \"sndconfig\"."
+"V拧echny incidenty budou sledov谩ny vyhrazen媒m kvalifikovan媒m technick媒m "
+"expertem spole膷nosti MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "M谩te n臎jakou zvukovou kartu na ISA sb臎rnici?"
+msgid "Package Group Selection"
+msgstr "V媒b臎r skupiny bal铆膷k暖"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Zvukov谩 karta"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Obnovit p艡es s铆钮 pomoc铆 protokolu: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Vzd谩len媒 CUPS server"
+msgid "You can configure each parameter of the module here."
+msgstr "Zde m暖啪ete nastavit ka啪d媒 z parametr暖 modulu."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Bez tisk谩rny"
+msgid "Choose the resolution and the color depth"
+msgstr "Vyberte si rozli拧en铆 a barevnou hloubku"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Tisk谩rna"
+msgid "Emulate third button?"
+msgstr "Emulovat t艡et铆 tla膷铆tko?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "My拧"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Nem暖啪ete vytvo艡it nov媒 odd铆l\n"
+"(proto啪e jste ji啪 dos谩hli maxim谩ln铆ho po膷tu prim谩rn铆ch odd铆l暖).\n"
+"Nejprve odstra艌te n臎kter媒 prim谩rn铆 odd铆l a vytvo艡te odd铆l roz拧铆艡en媒."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "膶asov谩 z贸na"
+msgid "Mount"
+msgstr "P艡ipojit"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Kl谩vesnice"
+msgid "Creating auto install floppy"
+msgstr "Vytv谩艡铆m disketu pro automatickou instalaci"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Souhrn"
+msgid "Install updates"
+msgstr "Aktualizace syst茅mu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Server"
+msgid "text box height"
+msgstr "v媒拧ka textov茅ho boxu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatick谩 synchronizace 膷asu (pomoc铆 NTP)"
+msgid "State"
+msgstr "Status"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarov茅 hodiny nastaveny na GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Zkontrolujte, zda v je za艡铆zen铆 %s vlo啪eno m茅dium"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Jak茅 je va拧e 膷asov茅 p谩smo?"
+msgid "Enable multiple profiles"
+msgstr "Povolit v铆ce profil暖"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Chcete to zkusit znovu?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "Tato volba zaz谩lohuje a obnov铆 v拧echny soubory v adres谩艡i /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Nelze kontaktovat zrcadlo %s"
+msgid "Local printer"
+msgstr "M铆stn铆 tisk谩rna"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupn媒ch bal铆膷k暖"
+msgid "Files Restored..."
+msgstr "Soubory obnoveny..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo (mirror) pro stahov谩n铆 bal铆膷k暖"
+msgid "Package selection"
+msgstr "V媒b臎r bal铆膷k暖"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Kontaktuji web Mandrake Linux pro z铆sk谩n铆 seznamu dostupn媒ch zrcadel"
+msgid "Mauritania"
+msgstr "Mauret谩nie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Nyn铆 m谩te mo啪nost st谩hnout aktualizovan茅 bal铆膷ky. Tyto bal铆膷ky byly\n"
-"uvoln臎ny a啪 po vyd谩n铆 distribuce. Mohou obsahovat bezpe膷nostn铆\n"
-"aktualizace nebo opravy chyb.\n"
+"Mohu zachovat sou膷asn茅 nastaven铆 a p艡edpokl谩dat, 啪e m谩te ji啪 nastaven媒 DHCP "
+"server; v takov茅m p艡铆pad臎 ov臎艡te, 啪e je spr谩vn臎 p艡evzato nastaven铆 s铆t臎 "
+"odpov铆daj铆c铆 va拧铆 lok谩ln铆 s铆ti; nebude v n臎m provedena 啪谩dn谩 zm臎na a nebude "
+"ani zm臎n臎no nastaven铆 DHCP serveru.\n"
"\n"
-"Chcete-li z铆skat tyto bal铆膷ky, mus铆te m铆t k dispozici funk膷n铆 p艡ipojen铆\n"
-"k Internetu.\n"
+"V媒choz铆 z谩znam DNS je vyrovn谩vac铆 jmenn媒 server (caching nameserver) "
+"nastaven媒 na va拧em firewallu. Tento z谩znam lze nahradit nap艡铆klad IP adresou "
+"va拧eho poskytovatele p艡ipojen铆 k Internetu.\n"
+"\n"
+"Jinak mohu zm臎nit jak rozhran铆, tak tak茅 p艡enastavit DHCP server podle "
+"pot艡eby.\n"
"\n"
-"Chcete nainstalovat aktualizace?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo啪te pros铆m disketu s moduly do %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo啪te pros铆m spou拧t臎c铆 disketu do %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Lok谩ln铆 tisk谩rna nenalezena! Pro ru膷n铆 instalaci tisk谩rny zadejte n谩zev "
+"za艡铆zen铆/souboru do pol铆膷ka (Paraleln铆 porty: /dev/lp0, /dev/lp1,... jsou "
+"ekvivalentn铆 LPT1:, LPT2:, ...,prvn铆 USB tisk谩rna: /dev/usb/lp0, druh谩 USB "
+"tisk谩rna: /dev/usb/lp1,...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Prob铆h谩 nastavov谩n铆 po instalaci"
+msgid "All primary partitions are used"
+msgstr "V拧echny prim谩rn铆 odd铆ly (partitions) jsou pou啪铆v谩ny"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Instaluji bal铆膷ek %s\n"
-"%d%%"
+"Doporu膷ujeme po tomto kroku restartovat X Window,\n"
+"aby se p艡ede拧lo probl茅m暖m se zm臎nou n谩zvu po膷铆ta膷e."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "P艡ipravuji instalaci"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Automatick谩 detekce a konfigurace hardware p艡i spu拧t臎n铆."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM ozna膷en茅 \"%s\""
+msgid "Installation Server Configuration"
+msgstr "Nastaven铆 pro instalaci serveru"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud m谩te v拧echna CD vypsan谩 n铆啪e, klepn臎te na Ok.\n"
-"Pokud nem谩te 啪谩dn茅 z nich, klepn臎te na Zru拧it.\n"
-"Pokud V谩m chyb铆 pouze n臎kter茅 z nich, odzna膷te je, a zvolte Ok."
+msgid "Configuring IDE"
+msgstr "Nastavuji IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "V拧echno"
+msgid "Network functionality not configured"
+msgstr "S铆钮 nen铆 nastavena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Opravdu minim谩ln铆 instalace (speci谩ln臎 bez urpmi)"
+msgid "Configure module"
+msgstr "Nastavit modul"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Z谩kladn铆 dokumentace (doporu膷eno!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokosov茅 ostrovy (Keeling Islands)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "X prost艡ed铆"
+msgid "Disconnecting from the Internet "
+msgstr "Odpojen铆 z Internetu "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nevybrali jste 啪谩dnou skupinu bal铆膷k暖\n"
-"Vyberte si pros铆m alespo艌 minim谩ln铆 instalaci"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Aby se zm臎ny uplatnily budete muset restartovat po膷铆ta膷"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Typ instalace"
+msgid "Provider phone number"
+msgstr "Telefonn铆 膷铆slo poskytovatele"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybran媒ch bal铆膷k暖 je v臎t拧铆 ne啪 m铆sto na disku"
+msgid "Host %s"
+msgstr "Po膷铆ta膷 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo啪te disketu obsahuj铆c铆 v媒b臎r bal铆膷k暖"
+msgid "Armenia"
+msgstr "Arm茅nie"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Nahr谩v谩m z diskety"
+msgid "Fiji"
+msgstr "Fid啪i"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "V媒b臎r bal铆膷k暖"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Argumenty: (d茅lka, ndigits=0, nupper=0)\n"
+"\n"
+"Nastav铆 minim谩ln铆 d茅lku hesla, minim谩ln铆 po膷et 膷铆slic a velk媒ch p铆smen v "
+"hesle."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Ulo啪it na disketu"
+msgid "Second floppy drive"
+msgstr "druh茅 mechaniky"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Nahr谩t z diskety"
+msgid "About Harddrake"
+msgstr "O aplikaci HardDrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vyberte si, zda chcete ulo啪it nebo nahr谩t v媒b臎r bal铆膷k暖 na disketu.\n"
-"Form谩t v媒b臎ru je stejn媒 jako form谩t automaticky generovan茅 diskety."
+msgid "Drive capacity"
+msgstr "Kapacita za艡铆zen铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Na va拧em syst茅mu nen铆 dostatek m铆sta pro instalaci nebo aktualizaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Hled谩m dostupn茅 bal铆膷ky"
+"Vlo啪te disketu do mechaniky\n"
+"V拧echna data na t茅to disket臎 budou smaz谩na"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Vyhled谩v谩m bal铆膷ky pro aktualizaci"
+msgid "Size: %s"
+msgstr "Velikost: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Prohled谩v谩m ji啪 instalovan茅 bal铆膷ky..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Control a Shift sou膷asn臎"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Hled谩m dostupn茅 bal铆膷ky a znovu sestavuji datab谩zi bal铆膷k暖..."
+msgid "secondary"
+msgstr "sekund谩rn铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nen铆 dostatek odkl谩dac铆ho prostoru k instalaci, pros铆m p艡idejte n臎jak媒"
+msgid "View Backup Configuration."
+msgstr "Prohl茅dnout konfiguraci z谩lohy."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Selhala kontrola souborov茅ho syst茅mu %s. Chcete opravit chyby? (pozor, m暖啪e "
-"doj铆t ke ztr谩t臎 dat)"
+msgid "if set to yes, report check result to syslog."
+msgstr "pokud je nastaveno, pos铆l谩 v媒stup kontroly do syslogu."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadn茅 stopy?"
+msgid "No password"
+msgstr "Bez hesla"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskov茅 odd铆ly kter茅 chcete naform谩tovat"
+msgid "Nigeria"
+msgstr "Nig茅rie"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Mus铆te restartovat po膷铆ta膷 aby se projevily zm臎ny v tabulce odd铆l暖"
+msgid "There is no existing partition to use"
+msgstr "Nen铆 zde 啪谩dn媒 existuj铆c铆 odd铆l k pou啪it铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Pro bootstrap nen铆 pot艡ebn茅 m铆sto o velikosti 1MB! Instalace m暖啪e pokra膷ovat "
-"ale pro spu拧t臎n铆 syst茅mu mus铆te vytvo艡it bootstrap odd铆l pomoc铆 DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Zvolte si p艡铆pojn茅(mount) body"
+"V tomto po膷铆ta膷i jsou dostupn茅 skenery\n"
+"\n"
+"%s\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Hled谩m odd铆ly, kter茅 lze p艡ipojit"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Abyste mohli tisknout na TCP nebo soketov茅 tisk谩rn臎, mus铆te zadat n谩zev nebo "
+"IP adresu tisk谩rny a voliteln臎 i 膷铆slo portu (v媒choz铆 je 9100). V p艡铆pad臎 "
+"server暖 HP JetDirect je 膷铆slo portu obvykle 9100, u jin媒ch server暖 m暖啪e b媒t "
+"jin茅. Pod铆vejte se do manu谩lu k va拧emu hardware."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Nejsou dostupn茅 啪谩dn茅 diskov茅 odd铆ly"
+msgid "Hard drive information"
+msgstr "Informace o pevn茅m disku"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
+msgid "Russian"
+msgstr "Rusk茅"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Jord谩n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
+msgid "Hide files"
+msgstr "Schovat soubory"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Automaticky nal茅zt tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tla膷铆tka"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"Aplikace XawTV nen铆 nainstalovan谩!\n"
+"\n"
+"\n"
+"M谩te-li TV kartu a n谩stroj DrakX ji ani nerozpoznal (nen铆 p艡铆tomen\n"
+"modul bttv nebo saa7314 v \"/etc/modules\"), ani nenainstaloval\n"
+"aplikaci XawTV, po拧lete pros铆m v媒sledek p艡铆kazu\n"
+"\"lspcidrake -v -f\" na adresu \"install\\@mandrakesoft.com\"\n"
+"s p艡edm臎tem zpr谩vy \"undetected TV card\".\n"
+"\n"
+"Tuto aplikaci m暖啪ete doinstalovat p艡铆kazem \"urpmi xawtv\" spu拧t臎n媒m \n"
+"v konzoli pod u啪ivatelem root."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tla膷铆tka"
+msgid "Sorry, no floppy drive available"
+msgstr "Bohu啪el nen铆 dostupn谩 啪谩dn谩 disketov谩 mechanika"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulace tla膷铆tek"
+msgid "Bolivia"
+msgstr "Bol铆vie"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Ke kter茅mu s茅riov茅mu portu je p艡ipojena va拧e my拧?"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Nastavit na serveru s Windows tisk谩rnu, kter谩 bude p艡铆stupn谩 pomoc铆 IPP "
+"protokolu a nastavit tisk z tohoto po膷铆ta膷e pomoc铆 spojen铆 \"%s\" v aplikaci "
+"PrinterDrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "P艡ipojen铆 my拧i"
+msgid "Bad package"
+msgstr "艩patn媒 bal铆膷ek"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Vyberte si typ va拧铆 my拧i."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"V谩拧 po膷铆ta膷 lze n臎kolika klepnut铆mi my拧i zm臎nit na velmi v媒konn媒 Linuxov媒 "
+"server: webov媒 server, po拧tovn铆 server, firewall, router, souborov媒 a "
+"tiskov媒 server, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "艩ifrovac铆 kl铆膷 pro %s"
+msgid "DrakSec Basic Options"
+msgstr "Z谩kladn铆 volby programu DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Aktualizace %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Pozn: Pokud m谩te PnP zvukovou kartu na ISA, pou啪ijte program sndconfig. "
+"Spust铆te ho p艡铆kazem \"sndconfig\" v konzoli."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Je to instalace nebo aktualizace?"
+msgid "Romania"
+msgstr "Rumunsko"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalace/Aktualizace"
+msgid "choose device"
+msgstr "vyberte za艡铆zen铆"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Zde je kompletn铆 seznam dostupn媒ch kl谩vesnic"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Vyberte si rozlo啪en铆 va拧铆 kl谩vesnice."
+msgid "Remove from LVM"
+msgstr "Odebrat z LVMu"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Konec"
+msgid "Timezone"
+msgstr "膶asov谩 z贸na"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Souhlas s licenc铆"
+msgid "German"
+msgstr "N臎meck茅"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Stala se chyba"
+msgid "Next ->"
+msgstr "D谩le ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> p艡epn. mezi prvky | <Space> v媒b臎r | <F12> dal拧铆 obraz."
+"Tato volba dovoluje tisk textov媒ch soubor暖 v japon拧tin臎. Pou啪ijte tuto "
+"funkci pouze pokud opravdu pot艡ebujete tisknout v japon拧tin臎, pokud je "
+"zvolena, nelze u啪 tisknout n谩rodn铆 znaky v latince a nelze nastavovat "
+"okraje, velikost font暖, atd. Toto nastaven铆 se t媒k谩 pouze tisk谩ren "
+"definovan媒ch na tomto po膷铆ta膷i. Pokud chcete tisknout japonsk茅 texty na "
+"vzd谩len茅 tisk谩rn臎, mus铆te tuto funkci aktivovat na vzd谩len茅m po膷铆ta膷i."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalace %s"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Tento odd铆l je odd铆l\n"
+"s ovlada膷i, je lep拧铆\n"
+"no nechat neporu拧en媒.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Nen铆 dostupn谩 啪谩dn谩 disketov谩 mechanika"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "V铆t谩 v谩s %s"
+msgid "Horizontal refresh rate"
+msgstr "Horizont谩ln铆(艡谩dkov谩) synchronizace"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"N臎kter茅 d暖le啪it茅 bal铆膷ky nebyly spr谩vn臎 nainstalovan茅.\n"
-"Je mo啪n茅, 啪e je po拧kozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to pou啪it铆m p艡铆kazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Zdvojen媒 p艡铆pojn媒 bod %s"
+"Nem暖啪u smazat p艡铆pojn媒 bod, proto啪e tento odd铆l je pou啪铆v谩n pro loopback.\n"
+"Odstra艌te nejprve loopback"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Stala se chyba, ale nev铆m, jak j铆 spr谩vn臎 interpretovat.\n"
-"Pokra膷ujte na vlastn铆 riziko."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Pros铆m po膷kejte"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Ukon膷it"
+"Nastaven铆 s铆t臎 proveden茅 p艡i instalaci nelze nyn铆 aktivovat. Zkontrolujte, "
+"zda je s铆钮 dostupn谩 po spu拧t臎n铆 syst茅mu a nastaven铆 opravte v ovl谩dac铆m "
+"centru Mandrake, v sekci \"S铆钮 a Internet\"/\"P艡ipojen铆\" a n谩sledn臎 "
+"nastavte tisk谩rnu tak茅 v ovl谩dac铆m centru v sekci \"Hardware\"/\"Tisk谩rna\""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Basic"
-msgstr "Z谩kladn铆"
+msgid "USB controllers"
+msgstr "USB kontrol茅r"
-#: ../../interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Roz拧铆艡en铆"
+msgid "What norm is your TV using?"
+msgstr "Jakou normu v谩拧 televizor pou啪铆v谩?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Remove"
-msgstr "Odebrat"
+msgid "Type:"
+msgstr "Typ:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Modify"
-msgstr "Zm臎nit"
+msgid "Share name"
+msgstr "Sd铆len茅 jm茅no"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Add"
-msgstr "P艡idat"
+msgid "enable"
+msgstr "povolit"
-#: ../../interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Vyberte soubor"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Kontaktuji web Mandrake Linux pro z铆sk谩n铆 seznamu dostupn媒ch zrcadel"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
-"Zde m暖啪ete vybrat kl谩vesu nebo kombinaci kl谩ves, kterou\n"
-"budete moci p艡ep铆nat rozlo啪en铆 znak暖 va拧铆 kl谩vesnice.\n"
-"(nap艡. mezi 膷esk媒m a americk媒m)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Prav谩 kl谩vesa \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Lev谩 kl谩vesa \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Kl谩vesa \"Menu\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt a Shift sou膷asn臎"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl a Alt sou膷asn臎"
+"Vyskytl se probl茅m p艡i restartu s铆t臎: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "Kl谩vesa CapsLock"
+msgid "Remove the loopback file?"
+msgstr "Odstranit soubor loopbacku?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control a Shift sou膷asn臎"
+msgid "Selected size is larger than available space"
+msgstr "Velikost vybran媒ch bal铆膷k暖 je v臎t拧铆 ne啪 m铆sto na disku"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Ob臎 kl谩vesy Shift sou膷asn臎"
+msgid "NCP server name missing!"
+msgstr "Chyb铆 n谩zev pro sd铆len铆 p艡es NCP!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Prav谩 kl谩vesa Alt"
+msgid "Please choose your country."
+msgstr "Vyberte si pros铆m svoji zem."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugosl谩vsk茅 (latin)"
+msgid "Hard Disk Backup files..."
+msgstr "Z谩lo啪n铆 soubory pevn茅ho disku..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamsk谩 \"膷铆seln谩 艡ada\" QWERTY"
+msgid "Laotian"
+msgstr "Laosk茅"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US (mezin谩rodn铆)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US-Americk茅"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Protokol rstat umo啪艌uje u啪ivatel暖m s铆t臎 sledovat vyt铆啪en铆 jednotliv媒ch\n"
+"stroj暖 p艡ipojen媒ch k s铆ti."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK-Britsk茅"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Znovu generuji seznam nastaven媒ch skener暖..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrajinsk茅"
+msgid "Scanner"
+msgstr "Skener"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tureck茅 (modern铆 model \"Q\")"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Varov谩n铆: test na t茅to grafick茅 kart臎 m暖啪e zp暖sobit zatuhnut铆 po膷铆ta膷e"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tureck茅 (tradi膷n铆 model \"F\")"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "U啪ivatelsk茅 jm茅no m暖啪e obsahovat pouze mal谩 p铆smena, 膷铆sla, '-' a '_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "T谩d啪ick谩 kl谩vesnice"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thajsk茅"
+msgid "Welcome To Crackers"
+msgstr "Dve艡e doko艡谩n"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamilsk茅 (psac铆 stroj)"
+msgid "Module options:"
+msgstr "Volby modulu:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamilsk茅 (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Zabezpe膷te va拧e s铆t臎 s produktem Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Srbsk茅 (cyrilice)"
+msgid "Go on without configuring the network"
+msgstr "Pokra膷ovat bez nastaven铆 s铆t臎"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovensk茅 (QWERTY)"
+msgid "Abort"
+msgstr "P艡eru拧it"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovensk茅 (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "沤谩dn谩 v媒zva na heslo na %s na portu %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovinsk茅"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"Pokud chcete pou啪铆vat za艡铆zen铆 bez zp臎tn茅ho p艡ev铆jen铆, pros铆m zatrhn臎te."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "艩v茅dsk茅"
+msgid "Usage of remote scanners"
+msgstr "Pou啪it铆 vzd谩len媒ch skener暖"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rusk茅 (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rusk茅"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"V谩拧 diskov媒 odd铆l s Windows je p艡铆li拧 fragmentov谩n. Restartujte po膷铆ta膷 do "
+"syst茅mu Windows, pou啪ijte program 'defrag' a potom spus钮te op臎t instalaci."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumunsk茅 (QWERTY)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvo艡谩k (Norsk茅)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumunsk茅 (QWERTZ)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Pr暖b臎h z谩lohov谩n铆 na pevn媒 disk... "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadsk茅 (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "Nelze prov茅st fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugalsk茅"
+msgid "Type: "
+msgstr "Typ: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polsk茅 (rozlo啪en铆 QWERTZ)"
+msgid "<-- Edit Client"
+msgstr "<-- Upravit klienta"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polsk茅 (rozlo啪en铆 QWERTY)"
+msgid "no fonts found"
+msgstr "nebyly nalezeny 啪谩dn茅 fonty"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norsk茅"
+msgid "Mouse"
+msgstr "My拧"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holandsk茅"
+msgid "not enough room in /boot"
+msgstr "nen铆 dost m铆sta v adres谩艡i /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malt茅zsk茅 (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "V媒b臎r libovoln茅ho ovlada膷e"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malt茅zsk茅 (UK)"
+msgid "Host name"
+msgstr "N谩zev po膷铆ta膷e"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolsk茅 (cyrilice)"
+msgid "Liechtenstein"
+msgstr "Lichten拧tejnsko"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myamarsk茅 (Burnsk茅)"
+msgid "the color of the progress bar"
+msgstr "barva li拧ty s pr暖b臎hem"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonsk茅"
+msgid "Suppress Fonts Files"
+msgstr "Ignorovat soubory s fonty"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "P艡idat do RAIDu"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Litevsk茅"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Pro Yaboot, pro dal拧铆 opera膷n铆 syst茅my, pro alternativn铆 j谩dra nebo pro\n"
+"z谩chrann媒 disk lze zde zadat dal拧铆 parametry.\n"
+"\n"
+"Pro jin茅 OS je mo啪n茅 zadat pouze n谩zev a hlavn铆 odd铆l.\n"
+"\n"
+"Pro Linux je n臎kolik dal拧铆ch mo啪nost铆:\n"
+"\n"
+" * Jmenovka: je to jednoduch媒 n谩zev, kter茅 m暖啪ete napsat do p艡铆kazov茅ho\n"
+"艡谩dku pro Yaboot pro zvolen铆 dan茅ho syst茅mu.\n"
+"\n"
+" * Obraz: je to jm茅no j谩dra, ze kter茅ho se spust铆 syst茅m. Typicky je to "
+"vmlinux\n"
+"膷i obdoba slova vmlinux s p艡铆ponami.\n"
+"\n"
+" * Root: ko艡enov茅 za艡铆zen铆 \"/\" p艡i instalaci Linuxu.\n"
+"\n"
+" * P艡idat volby: na po膷铆ta膷铆ch Apple pot艡ebuje j谩dro dal拧铆 parametry, aby "
+"se\n"
+"spr谩vn臎 nastavil hardware pro video, 膷i provedla emulace tla膷铆tek my拧i\n"
+"na kl谩vesnici, proto啪e my拧 u po膷铆ta膷e Apple nem谩 druh茅 a t艡et铆 tla膷铆tko.\n"
+"Zde jsou n臎jak茅 p艡铆klady:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: tato volba je ur膷ena moduly, kter茅 se mus铆 nahr谩t do pam臎ti "
+"je拧t臎\n"
+"d艡铆ve, ne啪 je p艡铆stupn媒 spou拧t臎c铆 odd铆l, 膷i v p艡铆pad臎 opravy syst茅mu.\n"
+"\n"
+" * Velikost initrd: v媒choz铆 velikost ramdisku je 4,096 byt暖. Pokud "
+"pot艡ebujete\n"
+"v臎t拧铆 velikost, zadejte sem pot艡ebnou hodnotu.\n"
+"\n"
+" * Read-write: b臎啪n臎 je \"root\" odd铆l p艡ipojen nejd艡铆ve v re啪imu pouze pro\n"
+"膷ten铆, aby se provedlo otestov谩n铆 syst茅mu p艡ed t铆m, ne啪 se pou啪ije pro b臎h.\n"
+"Zde je mo啪n茅 toto chov谩n铆 zm臎nit.\n"
+"\n"
+" * Bez grafiky: grafick茅 za艡铆zen铆 na po膷铆ta膷铆ch Apple je n臎kdy "
+"problematick茅\n"
+"a tak je mo啪n茅 zadat tuto volbu a zvolit nativn铆 podporu.\n"
+"\n"
+" * V媒choz铆: zvol铆 tuto polo啪ku jako v媒choz铆 pro v媒b臎r z nab铆dky, kdy sta膷铆\n"
+"pouze stisknout ENTER a spust铆 se. Tato polo啪ka je ozna膷ena \"*\" a v拧echny\n"
+"v媒b臎ry se zobraz铆 po stisknut铆 tla膷铆tka [Tab]."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevsk茅 \"foneticky\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Tisk谩rna \"%s\" byla 煤sp臎拧n臎 p艡id谩na do Star Office/OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litevsk茅 \"膷铆seln谩 艡ada\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Nen铆 dostupn谩 啪谩dn谩 disketov谩 mechanika!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litevsk茅 AZERTY (nov谩)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"V拧echny mo啪nosti dostupn茅 pro sou膷asnou tisk谩rnu jsou vyps谩ny n铆啪e, nebo "
+"klepn臎te na tla膷铆tko \"Mo啪nosti tisk谩rny\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litevsk茅 AZERTY (star谩)"
+msgid "Continue anyway?"
+msgstr "P艡esto chcete pokra膷ovat?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laosk茅"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Pokud nen铆 tisk谩rna v seznamu, vyberte kompatibiln铆 nebo podobn媒 model "
+"(pod铆vejte se do manu谩lu)"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinsko-Americk茅"
+msgid "Printer"
+msgstr "Tisk谩rna"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korejsk谩 kl谩vesnice"
+msgid "Saudi Arabia"
+msgstr "Saudsk谩 Ar谩bie"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japonsk谩 106 kl谩ves"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitutsk茅"
+msgid "Some devices were added:\n"
+msgstr "Byla p艡id谩na n臎kter谩 za艡铆zen铆:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italsk茅"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s cylindr暖, %s hlav, %s sektor暖\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandsk茅"
+msgid "Printing on the printer \"%s\""
+msgstr "Tisknu na tisk谩rnu \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "脥r谩nsk茅"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow a /etc/hosts.deny jsou ji啪 nastaveny - beze zm臎n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Izraelsk茅 (foneticky)"
+msgid "Restore From Tape"
+msgstr "Obnovit z p谩sky"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Izraelsk茅"
+msgid "Choose the profile to configure"
+msgstr "Zvolte profil pro nastaven铆"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Chorvatsk茅"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Pokud nechcete pou啪铆t v媒choz铆 zvolen媒 n谩zev,\n"
+"zadejte n谩zev po膷铆ta膷e pro Zeroconf bez te膷ek."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ma膹arsk茅"
+msgid "Backup Now from configuration file"
+msgstr "Z谩lohovat z konfigura膷n铆ho souboru"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmutsk茅"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "N谩zev p艡铆pojn茅ho bodu m暖啪e obsahovat pouze p铆smena a 膷铆slice"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujartsk茅"
+msgid "Restarting printing system..."
+msgstr "Restartuji tiskov媒 syst茅m ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "艠eck茅"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumenty: (jm茅no)\n"
+"\n"
+"P艡id谩 jm茅no k v媒jimk谩m, kter茅 se nekontroluj铆 na dobu platnosti pomoc铆 msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruz铆nsk茅 (rozlo啪en铆 \"Latin\")"
+msgid "See hardware info"
+msgstr "Uk谩zat informace o hardware"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruz铆nsk茅 (\"Rusk茅\" rozlo啪en铆)"
+msgid "First sector of boot partition"
+msgstr "Prvn铆 sektor zav谩d臎c铆ho diskov茅ho odd铆lu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Francouzsk茅"
+msgid "Printer manufacturer, model"
+msgstr "V媒robce tisk谩rny, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finsk茅"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Tisk bez ukl谩d谩n铆 do fronty"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "艩pan臎lsk茅"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[VOLBY]\n"
+"Nastaven铆 pro Mandrake Terminal Server (MTS)\n"
+"--enable : povol铆 MTS\n"
+"--disable : zak谩啪e MTS\n"
+"--start : spust铆 MTS\n"
+"--stop : ukon膷铆 MTS\n"
+"--adduser : p艡id谩 existuj铆c铆ho u啪ivatele do MTS (vy啪aduje jm茅no "
+"u啪ivatele)\n"
+"--deluser : odebere existuj铆c铆ho u啪ivatele z MTS (vy啪aduje jm茅no "
+"u啪ivatele)\n"
+"--addclient : p艡id谩 klienta do MTS (vy啪aduje MAC adresu, IP, n谩zev nbi "
+"obrazu)\n"
+"--delclient : odebere klienta z MTS (vy啪aduje MAC address, IP, n谩zev "
+"nbi obrazu)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonsk茅"
+msgid "Subnet Mask:"
+msgstr "Maska pods铆t臎:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvo艡谩k (艩v茅dsk茅) "
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Instalace t茅mat pro LiLo a Bootsplash provedena 煤sp臎拧n臎!"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvo艡谩k (Norsk茅)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Dva rozhoduj铆c铆 parametry jsou: vertik谩ln铆 synchroniza膷n铆 frekvence, co啪 je\n"
+"frekvence, kterou je obnovov谩na cel谩 obrazovka, a frekvence 艡谩dkov茅\n"
+" synchronizace (horiz. sync. rate), co啪 je frekvence jakou jsou zobrazov谩ny\n"
+"jednotliv茅 mikro艡谩dky (scanline).\n"
+"\n"
+"Je VELMI D女LE沤IT脡 abyste nezvolili typ monitoru se schopnostmi vy拧拧铆mi ne啪 "
+"m谩\n"
+"v谩拧 monitor, proto啪e byste si ho t铆m mohli po拧kodit. Jestli啪e si nejste "
+"jist铆\n"
+"zvolte rad臎ji typ s ni啪拧铆mi schopnostmi."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvo艡谩k (US) "
+msgid "Modify"
+msgstr "Zm臎nit"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "D谩nsk茅"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"P艡铆kazy \"%s\" a \"%s\" dovoluj铆 m臎nit volby pro ka啪dou tiskovou 煤lohu. "
+"Jednodu拧e zadejte pot艡ebn茅 nastaven铆 do p艡铆kazov茅 艡谩dky, nap艡. \"%s <soubor>"
+"\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Pot艡ebuji n谩zev po膷铆ta膷e, u啪ivatelsk茅 jm茅no a heslo!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "N臎meck茅 (bez mrtv媒ch kl谩ves)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV je protokol, kter媒 umo啪艌uje p艡ipojit webov媒 adres谩艡 jako lok谩ln铆, "
+"kter媒\n"
+"se potom tv谩艡铆 jako lok谩ln铆 souborov媒 syst茅m (takov媒 webov媒 server mus铆 "
+"b媒t)\n"
+"nastaven jako WebDAV server). Pokud chcete p艡idat WebDAV p艡ipojen铆, vyberte\n"
+"polo啪ku \"Nov媒\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "N臎meck茅"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "膶esk茅 (QWERTY)"
+msgid "new"
+msgstr "nov媒"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "膶esk茅 (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Chcete to zkusit znovu?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "艩v媒carsk茅 (Francouzsk媒 styl)"
+msgid "Wizard"
+msgstr "Pr暖vodce"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "艩v媒carsk茅 (N臎meck媒 styl)"
+msgid "Edit selected server"
+msgstr "Upravit vybran媒 server"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "B臎lorusk茅"
+msgid "Please choose where you want to backup"
+msgstr "Vyberte si, pros铆m, kam chcete z谩lohovat."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosensk茅"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Mus铆te restartovat po膷铆ta膷 aby se projevily zm臎ny v tabulce odd铆l暖"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilsk茅 (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Nezahrnout cache prohl铆啪e膷e"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulharsk茅 (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Jak茅 je rozlo啪en铆 va拧铆 kl谩vesnice?"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharsk茅 (foneticky)"
+msgid "Standard"
+msgstr "Standardn铆"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Beng谩lsk茅"
+msgid "Please choose your mouse type."
+msgstr "Vyberte si typ va拧i my拧i."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgick茅"
+msgid "Connect..."
+msgstr "P艡ipojit..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "脕zerb谩jd啪谩nsk茅 (latinka)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Nastaven铆 tisk谩rny \"%s\" selhalo!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabsk茅"
+msgid "not configured"
+msgstr "nenastaveno"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Arm茅nsk茅 (foneticky)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Arm茅nsk茅 (psac铆 stroj)"
+msgid "About"
+msgstr "O aplikaci"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Arm茅nsk茅 (star茅)"
+msgid "Proxies configuration"
+msgstr "Nastaven铆 proxy"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Alb谩nsk茅"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polsk茅"
+msgid "Start: sector %s\n"
+msgstr "Za膷谩tek: sektor %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvo艡谩k"
+msgid "Network interface already configured"
+msgstr "S铆钮ov茅 rozhran铆 je ji啪 nastaveno"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Nelze pracovat s disketou!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambie"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "p艡ipojuji se k pr暖vodci Bugzilla ..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Ji啪n铆 Afrika"
+msgid "Mail Server"
+msgstr "Po拧tovn铆 server"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Srbsko"
+msgid "Please click on a partition"
+msgstr "Pros铆m klepn臎te na odd铆l"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Jemen"
+msgid "Have a nice day!"
+msgstr "P艡eji hezk媒 den!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "p艡es s铆钮"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis a Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Aktualizace %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Zvolte p艡ipojen铆 tisk谩rny"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Panensk茅 ostrovy (U.S.)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Prob铆h谩 vyhled谩v谩n铆 TV kan谩l暖 ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Panensk茅 ostrovy (britsk茅)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Chyba p艡i pos铆l谩n铆 souboru p艡es FTP.\n"
+" Pros铆m opravte va拧e nastaven铆 FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "IP rozsah od:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent a Grenadiny"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internetov媒 superserver d茅mon (naz媒van媒 inetd) spou拧t铆 mnoho ostatn铆ch\n"
+"internetov媒ch slu啪eb, tak jak jsou zapot艡eb铆. Odpov铆d谩 za start nap艡.\n"
+"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete t铆m i ostatn铆\n"
+"slu啪by kter茅 spou拧t铆."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatik谩n"
+msgid "the height of the progress bar"
+msgstr "v媒拧ka li拧ty s pr暖b臎hem"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekist谩n"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Ulo啪it skrze %s na po膷铆ta膷: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Spojen茅 st谩ty (Minor Outlying Islands)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Akceptuje/Odm铆tne v拧esm臎rov茅 icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Dom茅nov媒 server"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
+msgid "Security Level:"
+msgstr "脷rove艌 zabezpe膷en铆:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzanie"
+msgid "Mount points must begin with a leading /"
+msgstr "P艡铆pojn茅 body (mount points) mus铆 za膷铆nat '/'"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "Po拧tovn铆 server Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Konec bez ulo啪en铆"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad a Tobago"
+msgid "Yemen"
+msgstr "Jemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Turecko"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Tento produkt je k dispozici na webov媒ch str谩nk谩ch MandrakeStore."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Zadejte pros铆m maxim谩ln铆 velikost\n"
+" povolenou pro DrakBackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisko"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Je zde v铆ce voleb, ze kter媒ch je mo啪n茅 si vybrat (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenist谩n"
+msgid "Hard drive detection"
+msgstr "Detekce pevn媒ch disk暖"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "V媒chodn铆 Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Nevybrali jste 啪谩dnou skupinu bal铆膷k暖\n"
+"Vyberte si pros铆m alespo艌 minim谩ln铆 instalaci"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Zadejte pros铆m URL serveru WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tad啪ikist谩n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Thajsko"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Francouzsk谩 ji啪n铆 teritoria"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "膶ad"
+msgid "Accept"
+msgstr "P艡ijmout"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks a Caicos Islands"
+msgid "Description"
+msgstr "Popis"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svazijsko"
+msgid "Error opening %s for writing: %s"
+msgstr "Chyba p艡i otev铆r谩n铆 %s pro z谩pis: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "S媒rie"
+msgid "Mouse type: %s\n"
+msgstr "Typ my拧i: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "S XFree %s m暖啪e va拧e karta vyu啪铆t 3D hardwarov茅 akcelerace."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome a Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Vyberte velikost va拧eho m茅dia CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povoluje su pouze 膷len暖m skupiny wheel nebo povoluje su ka啪d茅mu u啪ivateli."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Som谩lsko"
+msgid "Expert Area"
+msgstr "Expertn铆 nastaven铆"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Zvolte typ monitoru"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Pr谩zdn谩 zna膷ka nen铆 povolena"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Malt茅zsk茅 (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovensko"
+msgid "I can't add any more partition"
+msgstr "Nem暖啪u p艡idat 啪谩dn媒 dal拧铆 odd铆l"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard a Jan Mayen Islands"
+msgid "Size in MB: "
+msgstr "Velikost v MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovinsko"
+msgid "Remote printer"
+msgstr "Vzd谩len谩 tisk谩rna"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Svat谩 Helena"
+msgid "Please choose a language to use."
+msgstr "Pros铆m zvolte si jazyk, kter媒 chcete pou啪铆vat."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"VAROV脕N脥: Toto za艡铆zen铆 ji啪 bylo nastaveno pro p艡ipojen铆 k Internetu.\n"
+"Klepn臎te na Ok pro zachov谩n铆 nastaven铆.\n"
+"Modifikace n谩sleduj铆c铆ch polo啪ek p艡ep铆拧e toto nastaven铆."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "S煤d谩n"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"M暖啪u nastavit v谩拧 po膷铆ta膷 tak, aby automaticky p艡ihl谩sil vybran茅ho u啪ivatele."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychely"
+msgid "Floppy format"
+msgstr "Form谩ty pro diskety"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Islands"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudsk谩 Ar谩bie"
+msgid "Generic Printers"
+msgstr "Obecn茅 tisk谩rny"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Vyberte si tisk谩rnu, na kterou budou sm臎rov谩ny tiskov茅 煤lohy nebo zadejte do "
+"pol铆膷ka n谩zev za艡铆zen铆/n谩zev souboru"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusko"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Skenery na tomto po膷铆ta膷i jsou p艡铆stupn茅 i pro vzd谩len茅 po膷铆ta膷e"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rumunsko"
+msgid "First sector of the root partition"
+msgstr "Prvn铆 sektor ko艡enov茅ho odd铆lu"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Alternative drivers"
+msgstr "Alternativn铆 ovlada膷e"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Katar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Zvolte pros铆m v拧echny volby, kter茅 pot艡ebujete.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cape Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugalsko"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Zda m谩 cpu chybu 膷谩rky Cyrix 6x86"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Prvn铆 verze procesor暖 Pentium byly chybov茅 a zp暖sobovaly zatuhnut铆 p艡i "
+"dek贸dov谩n铆 instrukce F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Vyberte si port, ke kter茅mu je tisk谩rna p艡ipojena nebo zadejte do pol铆膷ka "
+"n谩zev za艡铆zen铆/n谩zev souboru"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre a Miquelon"
+msgid "/Options/Test"
+msgstr "/Volby/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polsko"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Tato 煤rove艌 mus铆 b媒t pou啪ita s rozmyslem. Sice m暖啪ete snadn臎ji pou啪铆vat "
+"sv暖j\n"
+"syst茅m, ale na druhou stranu je velmi citliv媒: Nesm铆 b媒t pou啪it pro\n"
+"po膷铆ta膷 p艡ipojen媒 k Internetu. Pro p艡ihl谩拧en铆 nen铆 zapot艡eb铆 啪谩dn茅 heslo."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "P谩kist谩n"
+msgid "Mounting partition %s"
+msgstr "P艡ipojuji odd铆l %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filip铆ny"
+msgid "User name"
+msgstr "U啪ivatelsk茅 jm茅no"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nov谩 Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Nov谩 konfigurace (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Francouzsk谩 Polyn茅sie"
+msgid "Userdrake"
+msgstr "UserDrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Kter媒 diskov媒 odd铆l chcete pou啪铆t pro Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Z谩lohovat syst茅m"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Om谩n"
+msgid "Test pages"
+msgstr "Testovac铆 str谩nka"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Nov媒 Z茅land"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Seznam dat pro obnoven铆:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Kontroluji %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "Mo啪nosti tisk谩rny pro TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nep谩l"
+msgid "Card mem (DMA)"
+msgstr "DMA karty"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragua"
+msgid "France"
+msgstr "Francie"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nig茅rie"
+msgid "browse"
+msgstr "proch谩zet"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Island"
+msgid "Checking installed software..."
+msgstr "Ov臎艡uj铆 nainstalovan媒 software..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Chyb铆 n谩zev vzd谩len茅 tisk谩rny!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nov谩 Kaledonie"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Chcete povolit tisk na tisk谩rn谩ch v lok谩ln铆 s铆ti?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibie"
+msgid "Turkey"
+msgstr "Turecko"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malajsie"
+msgid "Number of buttons"
+msgstr "Po膷et tla膷铆tek"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamsk谩 \"膷铆seln谩 艡ada\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Modul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maledivy"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Tiskov茅 fronty, kter茅 nebyly vytvo艡eny t铆mto programem nebo p艡es \"foomatic-"
+"configure\" nelze p艡en茅st."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl a Alt sou膷asn臎"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "Spojen茅 st谩ty americk茅"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauret谩nie"
+msgid "Default OS?"
+msgstr "V媒choz铆 OS?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "艩v媒carsk茅 (N臎meck媒 styl)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Northern Mariana Islands"
+msgid "Configure all heads independently"
+msgstr "Konfigurovat v拧echny monitory nez谩visle"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolsko"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Vyberte si tisk谩rnu, kterou chcete nastavit. Konfigurace t臎chto tisk谩ren je "
+"pln臎 automatick谩. Pokud nebyla tisk谩rna spr谩vn臎 detekov谩na nebo preferujete "
+"vlastn铆 nastaven铆 tisku, zvolte \"Ru膷n铆 konfigurace\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP Server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Ulo啪it/Nahr谩t na/z disketu/y"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonie"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Toto t茅ma nem谩 je拧t臎 啪谩dn媒 bootsplash v %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Islands"
+msgid "nice"
+msgstr "ned暖le啪it茅"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "Test skon膷铆 za %d sekund"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldava"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Ke kter茅mu s茅riov茅mu portu je v谩拧 modem p艡ipojen?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Country"
+msgstr "Zem臎"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+msgid "Property"
+msgstr "Vlastnost"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libye"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Loty拧sko"
+msgid "LAN Configuration"
+msgstr "Nastaven铆 LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Lucembursko"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Litva"
+msgid "Path or Module required"
+msgstr "Vy啪adov谩na cesta nebo modul"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Roz拧铆艡en茅 volby"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Lib茅rie"
+msgid "Coma bug"
+msgstr "Chyba 膷谩rky"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sr铆 Lanka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"V t茅to chv铆li je pot艡eba ur膷it, kter媒(茅) odd铆l(y) budou pou啪ity pro "
+"instalaci\n"
+"syst茅mu Mandrake Linux. Pokud byly odd铆ly ji啪 jednou definov谩ny, bu膹\n"
+"z p艡edchoz铆 instalace GNU/Linux nebo jin媒m programem na rozd臎len铆 disku,\n"
+"je mo啪n茅 pou啪铆t pr谩v臎 tyto odd铆ly. Jinak mus铆 b媒t odd铆ly nov臎 definov谩ny.\n"
+"\n"
+"Pro vytvo艡en铆 odd铆lu mus铆te nejd艡铆ve vybrat pevn媒 disk. Klepn臎te na \n"
+"\"hda\", co啪 je prvn铆 IDE disk, nebo na \"hdb\", co啪 je druh媒 disk,\n"
+"p艡铆padn臎 na \"sda\", co啪 je prvn铆 SCSI disk.\n"
+"\n"
+"Pro rozd臎len铆 vybran茅ho disku m暖啪ete pou啪铆t tyto volby:\n"
+"\n"
+" * \"V拧e smazat\": tato volba sma啪e v拧echny odd铆ly na disku.\n"
+"\n"
+" * \"Automaticky rozm铆stit\": dojde k automatick茅mu vytvo艡en铆 odd铆lu pro\n"
+"Ext2 a swap ve voln茅m prostoru disku.\n"
+"\n"
+" * \"V铆ce\": nab铆dne dal拧铆 mo啪nosti:\n"
+"\n"
+" * \"Ulo啪it tabulku odd铆l暖\": ulo啪铆 tabulku odd铆l暖 na disketu. To je\n"
+"vhodn茅 pro p艡铆pad po拧kozen铆 tabulky, kdy ji lze z t茅to z谩lohy obnovit.\n"
+"Doporu膷ujeme vyu啪铆t tuto mo啪nost.\n"
+"\n"
+" * \"Obnovit tabulku odd铆l暖\": obnov铆 tabulku odd铆l暖, kter谩 byla ji啪 "
+"d艡铆ve\n"
+"ulo啪ena na disketu.\n"
+"\n"
+" * \"Z谩chrana tabulky odd铆l暖\": pokud je tabulka po拧kozena, m暖啪ete se\n"
+"pokusit ji opravit. Bu膹te ale opatrn铆 a pamatujte na to, 啪e se to nemus铆 "
+"v啪dy\n"
+"poda艡it.\n"
+"\n"
+" * \"Znovu na膷铆st tabulku odd铆l暖\": zru拧铆 v拧echny zm臎ny a nahraje p暖vodn铆\n"
+"tabulku odd铆l暖.\n"
+"\n"
+" \"Automatick茅 p艡ipojov谩n铆 pro vyj铆mateln谩 m茅dia\": odzna膷en铆 t茅to volby\n"
+"zp暖sob铆, 啪e p艡i p艡ipojov谩n铆 a odpojov谩n铆 vyj铆mateln媒ch m茅di铆 jako jsou CD-"
+"ROM\n"
+"disky a floppy disky je nutn茅 pou啪铆t ru膷n臎 p艡铆kaz mount.\n"
+"\n"
+" * \"Pr暖vodce\": pokud nem谩te dobr茅 znalosti o rozd臎lov谩n铆 disk暖, pou啪ijte\n"
+"tuto volbu, kdy se spust铆 pr暖vodce. Doporu膷ujeme, pokud nem谩te dobr茅 "
+"znalosti\n"
+"o vytv谩艡en铆 odd铆l暖 na disku.\n"
+"\n"
+" * \"Odvolat\": zru拧铆 v拧echny proveden茅 zm臎ny.\n"
+"\n"
+" * \"P艡epnout norm谩ln铆/expertn铆 re啪im\": dovoluje dal拧铆 akce s odd铆ly\n"
+"(typ odd铆lu, volby, form谩tov谩n铆) a zobraz铆 dal拧铆 informace.\n"
+"\n"
+" * \"Hotovo\": pokud m谩te disk rozd臎len, ulo啪铆 se zm臎ny na disk.\n"
+"\n"
+"Pokud definujete velikost odd铆lu, m暖啪ete p艡esn臎ji jejich velikost ur膷it "
+"pomoc铆\n"
+"kurzorov媒ch 拧ipek na kl谩vesnici.\n"
+"\n"
+"Pozn谩mka: ka啪dou volbu je mo啪n茅 zadat tak茅 z kl谩vesnice. Mezi odd铆ly se\n"
+"m暖啪ete pohybovat pomoc铆 kl谩ves [Tab] a [艩ipka nahoru/拧ipka dol暖].\n"
+"\n"
+"Pokud je vybr谩n odd铆l, lze pou啪铆t tyto volby:\n"
+"\n"
+" * Ctrl-c pro vytvo艡en铆 nov茅ho odd铆lu (pokud je vybr谩n pr谩zdn媒 odd铆l);\n"
+"\n"
+" * Ctrl-d pro smaz谩n铆 odd铆lu;\n"
+"\n"
+" * Ctrl-m pro zad谩n铆 bodu p艡ipojen铆.\n"
+"\n"
+"V铆ce informac铆 o jednotliv媒ch druz铆ch souborov媒ch syst茅m暖 naleznete\n"
+"v kapitole o ext2fs v \"Referen膷n铆 p艡铆ru膷ce\".\n"
+"\n"
+"Pokud instalujete na po膷铆ta膷 PPC, je pot艡eba vytvo艡it mal媒 odd铆l HFS,\n"
+"tzv. \"bootstrap\" o minim谩ln铆 velikosti 1MB, kter媒 bude pou啪it pro zavad臎膷\n"
+"Yaboot. Pokud vytvo艡铆te tento odd铆l v臎t拧铆, nap艡. 50 MB, je to dobr茅 m铆sto "
+"pro\n"
+"ulo啪en铆 ramdisku a j谩dra pro situace z谩chrany disku."
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Lichten拧tejnsko"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Grafick谩 karta\n"
+"\n"
+" Instala膷n铆 program je schopen automaticky detekovat a nastavit grafickou\n"
+"kartu instalovanou v po膷铆ta膷i. Pokud se to nepoda艡铆, m谩te mo啪nost si ze\n"
+"seznamu vybrat p艡铆slu拧nou grafickou kartu ru膷n臎.\n"
+"\n"
+" V p艡铆pad臎, 啪e pro va拧i kartu je mo啪n茅 pou啪铆t v铆ce r暖zn媒ch server暖, s 3D\n"
+"akcelerac铆 nebo bez, je pouze na v谩s, kter媒 server si vyberete jako nejv铆ce\n"
+"vyhovuj铆c铆 va拧im pot艡eb谩m."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Svat谩 Lucie"
+msgid "There was an error installing packages:"
+msgstr "Stala se chyba p艡i instalaci bal铆膷k暖:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "Lexmark inkjet configuration"
+msgstr "Nastaven铆 inkoustov茅 tisk谩rny Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Zp臎t"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazachst谩n"
+msgid "Save partition table"
+msgstr "Ulo啪it tabulku odd铆l暖"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmansk茅 ostrovy"
+msgid "Finnish"
+msgstr "Finsk茅"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
+msgid "Macedonia"
+msgstr "Makedonie"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Sd铆len铆 mezi u啪ivateli pou啪铆v谩 skupinu \"fileshare\". \n"
+"U啪ivatele lze do t茅to skupiny p艡idat pomoc铆 n谩stroje UserDrake."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Severn铆)"
+msgid "Slovenian"
+msgstr "Slovinsk茅"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts a Nevis"
+msgid "Libya"
+msgstr "Libye"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comoros"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Vyp谩lit na CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambod啪a"
+msgid "Table"
+msgstr "Tabulka"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzst谩n"
+msgid "I don't know how to format %s in type %s"
+msgstr "nev铆m jak naform谩tovat %s na typ %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Ke艌a"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japonsko"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" Povol铆/Zak谩啪e pou啪it铆 knihovny libsafe, pokud je na syst茅mu nalezena."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jord谩n"
+msgid "Stop Server"
+msgstr "Zastavit server"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Vyberte t茅ma pro\n"
+"LiLo a Bootsplash,\n"
+"m暖啪ete je vybrat\n"
+"ka啪d茅 zvl谩拧钮"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "脥r谩n"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumenty: (arg, listen_tcp=None)\n"
+"\n"
+"Povol铆/Zak谩啪e spojen铆 na X server. Prvn铆 argument ud谩v谩, co se provede\n"
+"na stran臎 klienta. ALL (v拧echna spojen铆 jsou povolena), LOCAL (pouze "
+"lok谩ln铆\n"
+"spojen铆 je povoleno) a NONE (nen铆 povoleno 啪谩dn茅 spojen铆)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Ir谩k"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britsk茅 teritorium Indick茅ho mo艡e"
+msgid "Use auto detection"
+msgstr "Pou啪铆t autodetekci"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Indie"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM p艡id谩v谩 do textov媒ch program暖 podporu my拧i (nap艡 pro Midnight "
+"Commander).\n"
+"M暖啪e tak茅 v konzoli prov谩d臎t operace 'vyjmi' a 'vlo啪' a ovl谩dat pop-up menu."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Izrael"
+msgid "Started on boot"
+msgstr "Spustit p艡i startu"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irsko"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"P艡ipojte se k t媒m暖m podpory spole膷nosti MandrakeSoft a on-line Linuxov茅 "
+"komunit臎, sd铆lejte sv茅 znalosti a pomozte ostatn铆m t铆m, 啪e se stanete "
+"uzn谩van媒m Expertem na webov媒ch str谩nk谩ch on-line technick茅 podpory:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indon茅sie"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Nastaven铆m n谩sleduj铆c铆ch voleb lze upravit zabezpe膷en铆 va拧eho\n"
+"syst茅mu. Pokud pot艡ebujete poradit, prohl茅dn臎te si tipy s n谩pov臎dou.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Ma膹arsko"
+msgid "Automatically find available printers on remote machines"
+msgstr "Automaticky nal茅zt dostupn茅 tisk谩rny na vzd谩len媒ch po膷铆ta膷铆ch"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Ulo啪it na p谩sku na za艡铆zen铆: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Chorvatsko"
+msgid "East Timor"
+msgstr "V媒chodn铆 Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Smazat profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard a McDonaldovy ostrovy"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povol铆/Zak谩啪e v媒pis u啪ivatel暖 ve spr谩vc铆ch p艡ihl谩拧en铆 (kdm nebo gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Instaluji Foomatic ..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "膶铆na"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Pros铆m odhlaste se a pak stiskn臎te Ctrl-Alt-Backspace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "detekov谩no"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Je pot艡eba restartovat s铆钮. Chcete prov茅st restart ?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Bal铆膷ek: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Nelze zapsat soubor /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Ji啪n铆 Georgie a ostrovy South Sandwich"
+msgid "SECURITY WARNING!"
+msgstr "BEZPE膶NOSTN脥 VAROV脕N脥!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Rovn铆kov谩 Guinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Ne, nechci automatick茅 p艡ihl谩拧en铆"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "N谩stroj pro migraci z Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambie"
+msgid "All languages"
+msgstr "V拧echny jazyky"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Gr贸nsko"
+msgid "Removing %s"
+msgstr "Odstra艌uji %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Testuji p艡ipojen铆 k internetu..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Velikost vyrovn谩vac铆 pam臎ti"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Francouzsk谩 Guinea"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Hesla jsou nyn铆 aktivn铆, ale st谩le nedoporu膷uji pou啪铆t tento po膷铆ta膷 na s铆ti."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgie"
+msgid "Start sector: "
+msgstr "Po膷谩te膷n铆 sektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Velk谩 Brit谩nie"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Bal铆膷ek %s mus铆 b媒t nainstalov谩n. Chcete ho nainstalovat?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychely"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Faroe Islands"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"PrinterDrake provedl porovn谩n铆 modelu tisk谩rny, kter媒 byl zji拧t臎n p艡i auto-"
+"detekci s modelem obsa啪en媒m v jeho datab谩zi a nab铆dl nejlep拧铆 艡e拧en铆. Tato "
+"volba m暖啪e b媒t 拧patn谩, zvl谩拧钮 pokud nen铆 tisk谩rna obsa啪ena v datab谩zi. "
+"Zkontrolujte, zda je volba spr谩vn谩 a klepn臎te na \"Zvolen媒 model je spr谩vn媒"
+"\" a pokud nen铆, volte \"Vybrat model ru膷n臎\". V dal拧铆 obrazovce potom bude "
+"mo啪n茅 vybrat model tisk谩rny ru膷n臎.\n"
+"\n"
+"Pro va拧i tisk谩rnu PrinterDrake nalezl:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikron茅sie"
+msgid "Bad password on %s"
+msgstr "Chybn茅 heslo na %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandy (Malvinas)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Na拧el jsem jednu nezn谩mou tisk谩rnu p艡铆mo p艡ipojenou k va拧emu po膷铆ta膷i"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fid啪i"
+msgid "Zambia"
+msgstr "Zambie"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finsko"
+msgid "Security Administrator (login or email)"
+msgstr "Administr谩tor bezpe膷nosti (p艡ihla拧ovac铆 jm茅no nebo email)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopie"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Omlouv谩me se, ale podporujeme pouze j谩dra 艡ady 2.4."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "艩pan臎lsko"
+msgid "Romanian (qwerty)"
+msgstr "Rumunsk茅 (QWERTY)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "Vyv铆j铆 se... 膷ekejte pros铆m."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Z谩padn铆 Sahara"
+msgid "Czech Republic"
+msgstr "膶esk谩 republika"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egypt"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonsko"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ekv谩dor"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Al啪铆rsko"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominik谩nsk谩 republika"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "D谩nsko"
+msgid "Old configuration (isdn4net)"
+msgstr "Star谩 konfigurace (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "D啪ibuti"
+msgid "Sound card"
+msgstr "Zvukov谩 karta"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Kypr"
+msgid "Import Fonts"
+msgstr "Zav谩d臎n铆 font暖"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "V谩no膷n铆 ostrov"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"M谩te jeden velik媒 odd铆l\n"
+"(v臎t拧inou pou啪铆van媒 Microsoft Windows).\n"
+"Doporu膷uji v谩m nejprve zmen拧it tento odd铆l\n"
+"(klepn臎te na n臎j a potom na \"Zm臎nit velikost\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
+msgid "Suppress Temporary Files"
+msgstr "Ignorovat do膷asn茅 soubory"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Change partition type"
+msgstr "Zm臎nit typ odd铆lu"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbie"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Rozli拧en铆\n"
+"\n"
+" Zde si m暖啪ete vybrat rozli拧en铆 a barevnou hloubku, kter茅 va拧e karta \n"
+"podporuje. Vyberte si to co v谩m nejv铆ce vyhovuje (v媒b臎r lze po instalaci\n"
+"samoz艡ejm臎 zm臎nit). Na monitoru bude zobrazena p艡铆klad nastaven铆."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Network Options"
+msgstr "Volby s铆t臎"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Zobrazit t茅ma\n"
+"na konzoli"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cookovy ostrovy"
+msgid "Statistics"
+msgstr "Statistiky"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "(on %s)"
+msgstr "(na %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "艩v媒carsko"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Knihovna, kter茅 zabra艌uje 煤tok暖m proti p艡ete膷en铆 bufferu nebo proti 拧patn茅mu "
+"form谩tov谩n铆 艡et臎zc暖."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centr谩ln铆 africk谩 republika"
+msgid "average"
+msgstr "pr暖m臎r"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "New printer name"
+msgstr "Nov媒 n谩zev tisk谩rny"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosov茅 ostrovy (Keeling Islands)"
+msgid "Equatorial Guinea"
+msgstr "Rovn铆kov谩 Guinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povol铆/Zak谩啪e automatick茅 p艡ihl谩拧en铆."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Vytvo艡it z谩lohu"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "B臎lorusko"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Pro vyti拧t臎n铆 souboru z p艡铆kazov茅 艡谩dky (v termin谩lov茅m okn臎) pou啪ijte "
+"p艡铆kaz \"%s <soubor>\" nebo \"%s <soubor>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Nyn铆 nen铆 povolena 啪谩dn谩 alternativa"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Island"
+msgid "Romanian (qwertz)"
+msgstr "Rumunsk茅 (QWERTZ)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bh煤t谩n"
+msgid "Write Config"
+msgstr "Zapsat nastaven铆"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamy"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"D茅mon routed umo啪艌uje automaticky obnovovat sm臎rovac铆 tabulku (router "
+"table)\n"
+"pro IP adresy. K tomu pou啪铆v谩 protokol RIP. Zat铆mco RIP je b臎啪n臎 pou啪铆v谩n\n"
+"v mal媒ch s铆t铆ch, pro slo啪it臎j拧铆 s铆t臎 je zapot艡eb铆 slo啪it臎j拧铆 protokoly."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Braz铆lie"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bol铆vie"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povol铆/Zak谩啪e vzd谩len茅 p艡ihl谩拧en铆 u啪ivatele root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Browse"
+msgstr "Proch谩zet"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermudy"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Chcete se nyn铆 pokusit p艡ipojit k internetu?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgick茅"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrajn"
+msgid "Do you have an ISA sound card?"
+msgstr "M谩te n臎jakou zvukovou kartu na ISA sb臎rnici?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulharsko"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Ve va拧em po膷铆ta膷i nebyl nalezen 啪谩dn媒 s铆钮ov媒 adapt茅r.\n"
+"Nemohu nastavit typ spojen铆."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Banglad茅拧"
+msgid "Can't make screenshots before partitioning"
+msgstr "Nelze prov茅st sejmut铆 obrazovky p艡ed rozd臎len铆m disk暖"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "N谩zev po膷铆ta膷e"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna a Hercegovina"
+msgid "/File/Save _As"
+msgstr "/Soubor/Ulo啪it _jako"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "脕zerb谩jd啪谩n"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Pro z铆sk谩n铆 p艡铆stupu na vzd谩len茅 CUPS servery v lok谩ln铆 s铆ti pot艡ebujete "
+"pouze povolit volbu \"Automaticky nal茅zt dostupn茅 tisk谩rny na vzd谩len媒ch "
+"po膷铆ta膷铆ch\". CUPS server n谩sledn臎 informuje o t臎chto tisk谩rn谩ch. V拧echny "
+"zn谩m茅 tisk谩rny potom budou vyps谩ny v sekci \"Vzd谩len茅 tisk谩rny\" v hlavn铆m "
+"okn臎 aplikace PrinterDrake. Pokud CUPS server(y) nejsou ve va拧铆 lok谩ln铆 "
+"s铆ti, mus铆te zadat IP adresu a voliteln臎 tak茅 膷铆slo portu, aby bylo mo啪n茅 "
+"uveden茅 informace ze server暖 z铆skat."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s nen铆 v datab谩zi skener暖, nastavit ru膷n臎?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Austr谩lie"
+msgid "Delay before booting default image"
+msgstr "Prodleva p艡ed automatick媒m spu拧t臎n铆m"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Americk谩 Samoa"
+msgid "Restrict command line options"
+msgstr "Omezen铆 nastaven铆 z p艡铆kazov茅 艡谩dky"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "V媒chodn铆 Evropa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktida"
+msgid "Use free space"
+msgstr "Pou啪铆t voln茅 m铆sto"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "pou啪铆t dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nizozemsk茅 Antily"
+msgid "Mail alert"
+msgstr "Varovn茅 zpr谩vy e-mailem"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Arm茅nie"
+msgid "Internet configuration"
+msgstr "Nastaven铆 Internetu"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Alb谩nie"
+msgid "Uzbekistan"
+msgstr "Uzbekist谩n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Nalezeno %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua a Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Automaticky detekovat _tisk谩rny"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Spojen茅 Arabsk茅 Emir谩ty"
+msgid "Finish"
+msgstr "Ukon膷it"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Uk谩zat automaticky vybran茅 bal铆膷ky"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afgh谩nist谩n"
+msgid "CPU flags reported by the kernel"
+msgstr "P艡铆znaky CPU nalezen茅 j谩drem"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Propleten茅 p艡铆pojn茅 body %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejd艡铆ve logick茅 disky\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Podpora PCMCIA ji啪 nen铆 dostupn谩 pro kernely 2.2. Pou啪ijte pros铆m 艡adu 2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "TO膶IT KOLE膶KEM!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Vyzkou拧ejte na my拧i,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Vyzkou拧ejte pros铆m, zda funguje my拧"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Bez my拧i"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "N臎co neprob臎hlo spr谩vn臎! - Je nainstalovan媒 program mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "沤谩dn谩"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 tla膷铆tka"
+msgid "Please try again"
+msgstr "Zkuste to znovu, pros铆m"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 tla膷铆tka"
+msgid "The model is correct"
+msgstr "Zvolen媒 model je spr谩vn媒"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 tla膷铆tko"
+msgid "FAT resizing failed: %s"
+msgstr "Zm臎na FAT odd铆lu neusp臎la: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "Busmouse"
+msgid "Individual package selection"
+msgstr "V媒b臎r jednotliv媒ch bal铆膷k暖"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Na tomto diskov茅m odd铆lu nelze m臎nit velikost"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (s茅riov谩, star媒 C7 typ)"
+msgid "Location"
+msgstr "Um铆st臎n铆"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "沤urn谩lovac铆 FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Tento po膷铆ta膷"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech s茅rie CC (s茅riov谩)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "P铆smeno v DOSu: %s (jenom odhad)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Vyberte soubory nebo adres谩艡e a klepn臎te na 'P艡idat'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrajn"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "vynechat SCSI moduly"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Standardn铆 t艡铆tla膷铆tkov谩 my拧"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Rodina pro cpu (nap艡. 6 pro i686 t艡铆du)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Standardn铆 dvoutla膷铆tkov谩 my拧"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Proto啪e prov谩d铆te instalaci po s铆ti, je ji啪 s铆钮 nastavena.\n"
+"Klepn臎te na Ok pro zachov谩n铆 nastaven铆 nebo klepn臎te na Zru拧it pro nov茅 "
+"nastaven铆 p艡ipojen铆 Internetu a k s铆ti.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "S茅riov谩"
+msgid "Keyboard layout: %s\n"
+msgstr "Rozlo啪en铆 kl谩vesnice: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Zde m暖啪ete rozhodnout, zda tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i budou "
+"vzd谩len臎 p艡铆stupn茅 a z kter媒ch vzd谩len媒ch po膷铆ta膷暖."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "S kole膷kem"
+msgid "Maltese (US)"
+msgstr "Malt茅zsk茅 (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Obecn媒"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"P艡ipojuje a odpojuje v拧echny s铆钮ov茅 (NFS), SMB (Lan/Windows) a Netware "
+"(NCP)\n"
+"p艡铆pojn茅 body (mount points)."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV karta"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "P艡epnout se do m贸du 'norm谩ln铆'"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardn铆 PS2 my拧 s kole膷kem"
+msgid "Size"
+msgstr "Velikost"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standardn铆"
+msgid "Greenland"
+msgstr "Gr贸nsko"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - my拧"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "P艡epnut铆 mezi abecedn铆m a skupinov媒m 艡azen铆m"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sbalit v臎tev"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Rozbalit v臎tev"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Informace"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Je to spr谩vn臎?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-2,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba p艡i zapisov谩n铆 do souboru %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "艩patn媒 z谩lo啪n铆 soubor"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neusp臎la: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "P谩ska nem谩 spr谩vn媒 n谩zev. M谩 ozna膷en铆 %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Ve tabulce diskov媒ch odd铆l暖 je mezera, ale nemohu ji pou啪铆t.\n"
-"Jedin茅 艡e拧en铆 je p艡esunout prim谩rn铆 odd铆ly tak, abyste m臎li mezeru vedle\n"
-"roz拧铆艡en媒ch odd铆l暖."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Roz拧铆艡en茅 diskov茅 odd铆ly nejsou na tomto syst茅mu podporov谩ny"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "chyba p艡ipojov谩n铆: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "m暖啪e se hodit"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "ned暖le啪it茅"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "nejm茅n臎 d暖le啪it茅"
+"Sd铆len铆 internetov茅ho p艡ipojen铆 u啪 bylo nastaveno.\n"
+"Nyn铆 je povoleno.\n"
+"\n"
+"Co chcete d谩le d臎lat?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "d暖le啪it茅"
+msgid "Delete All NBIs"
+msgstr "Smazat v拧echny NBI"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "must have"
-msgstr "mus铆te m铆t"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Pokud jsou n臎jak茅 pochybnosti, je zobrazen dialog s v媒b臎rem mo啪nost铆.\n"
+"\n"
+" * \"Jak媒 spou拧t臎膷 pou啪铆t:\" je mo啪n茅 si vybrat ze t艡铆 mo啪nost铆:\n"
+"\n"
+" * \"GRUB\": pokud preferujete zavad臎膷 Grub (textov谩 nab铆dka).\n"
+"\n"
+" * \"LILO s grafickou nab铆dkou\": pokud preferujete LILO s grafick媒m\n"
+"rozhran铆m.\n"
+"\n"
+" * \"LILO s textovou nab铆dkou\": pokud preferujete textov茅 rozhran铆.\n"
+"\n"
+" * \"Spou拧t臎c铆 za艡铆zen铆\": ve v臎t拧in臎 p艡铆pad暖 nen铆 nutn茅 m臎nit v媒choz铆\n"
+"nastaven铆 (\"/dev/hda\"), ale lze nainstalovat zavad臎膷 na druh媒 disk\n"
+"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
+"\n"
+" * \"Prodleva p艡es spu拧t臎n铆m\": pokud zapnete po膷铆ta膷, je v tomto 膷ase\n"
+"umo啪n臎no u啪ivateli vybrat si jin媒 syst茅m z nab铆dky p艡ed t铆m, ne啪 bude\n"
+"zaveden v媒choz铆 syst茅m.\n"
+"\n"
+"!! Vyvarujte se pokus暖 nenainstalovat zavad臎膷 (vybr谩n铆m volby \"P艡esko膷it"
+"\"),\n"
+"proto啪e by m臎l existovat zp暖sob, jak zav茅st syst茅m Mandrake Linux!\n"
+"Tak茅 si dob艡e rozmyslete, jak茅 zm臎ny zde prov谩d铆te !!\n"
+"\n"
+"Klepnut铆m na tla膷铆tko \"Roz拧铆艡en茅\" se dialog roz拧铆艡铆 o dal拧铆 mo啪nosti,\n"
+"vyhrazen茅 pro znal茅 u啪ivatele."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nen铆 dostatek odd铆l暖 pro RAID 煤rovn臎 %d\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"pokud je nastaveno, odes铆l谩 report na dan媒 email nebo p艡铆mo u啪ivateli root"
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid neusp臎l"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Kter茅 XFree by jste cht臎li pou啪铆t?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neusp臎l (mo啪n谩, 啪e chyb铆 raidtools?)"
+msgid "More"
+msgstr "V铆ce"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nem暖啪u p艡idat odd铆l do _naform谩tovan茅ho_ RAID md%d"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"S touto bezpe膷nostn铆 煤rovn铆 je mo啪n茅 pou啪铆vat syst茅m jako server.\n"
+"Bezpe膷nost je nyn铆 dostate膷n臎 vysok谩, aby bylo mo啪n茅 pou啪铆vat syst茅m jako "
+"server, ke kter茅mu\n"
+"je mo啪n茅 p艡ipojit mnoho klient暖. Pozn谩mka: pokud je po膷铆ta膷 pou啪铆v谩n pouze "
+"jako klient pro p艡ipojen铆 k Internetu, je lep拧铆 zvolit ni啪拧铆 煤rove艌."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Stop"
+msgid "Account Password"
+msgstr "Heslo va拧eho 煤膷tu"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Rozhodli jste se nainstalovat zavad臎膷 syst茅mu na odd铆l.\n"
+"To znamen谩, 啪e ji啪 zavad臎膷 na disku, ze kter茅ho spou拧t铆te syst茅m n臎jak媒 je "
+"(nap艡. System Commander).\n"
+"\n"
+"Ze kter茅ho disku spou拧t铆te syst茅m?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "P艡i spu拧t臎n铆"
+msgid "Tajik keyboard"
+msgstr "T谩d啪ick谩 kl谩vesnice"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Nejsou 啪谩dn茅 dal拧铆\n"
-"informace o slu啪b臎, promi艌te."
+"Konfiguraci tisk谩rny, kterou jste provedli pro frontu %s lze p艡en茅st na "
+"frontu %s, tj. na sou膷asnou frontu. V拧echna nastaven谩 data (n谩zev tisk谩rny, "
+"popis, um铆st臎n铆, typ p艡ipojen铆 a dal拧铆 v媒choz铆 nastaven铆) budou p艡eps谩na, "
+"ale tiskov茅 煤lohy nebudou p艡eneseny.\n"
+"Ne v拧echny fronty lze p艡en茅st z n谩sleduj铆c铆ch d暖vod暖:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "Slu啪by a d茅moni"
+msgid "Font List"
+msgstr "Seznam font暖"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "zastaveno"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"M暖啪ete pot艡ebovat zm臎nit startovac铆 za艡铆zen铆 pro Open Firmware\n"
+" pro aktivaci spou拧t臎c铆ho programu. Pokud nevid铆te po spu拧t臎n铆 prompt,\n"
+" stiskn臎te p艡i startu Command-Option-O-F a zadejte:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Potom zadejte: shut-down\n"
+"P艡i dal拧铆m spu拧t臎n铆 u啪 uvid铆te prompt."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "spu拧t臎no"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Zd谩 se, 啪e m谩te n臎jak媒 nezn谩m媒 po膷铆ta膷,\n"
+"na kter茅m nebude Yaboot pracovat.\n"
+"Instalace bude pokra膷ovat, ale budete\n"
+"pot艡ebovat BootX pro spu拧t臎n铆 syst茅mu."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, kter茅 slu啪by by m臎li b媒t automaticky spu拧t臎ny p艡i startu"
+msgid "Select file"
+msgstr "Zvolit soubor"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Datab谩zov茅 servery"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Vyberte s铆钮 nebo po膷铆ta膷, na kter茅m budou lok谩ln铆 tisk谩rny dostupn茅:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Vzd谩len谩 administrace"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Tyto p艡铆kazy lze nastavit do pol铆膷ka \"P艡铆kazy tisku\" v dialogu tisku ve "
+"v臎t拧in臎 aplikac铆, ale nezad谩v谩 se zde n谩zev souboru, kter茅 je poka啪d茅 jin茅 v "
+"z谩vislosti na dan茅 aplikaci.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Sd铆len铆 soubor暖"
+msgid "Japan"
+msgstr "Japonsko"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "Mo啪nosti tisk谩rny"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Tisk"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Zm臎ny jsou provedeny, ale pro aktivaci je nutn茅 prov茅st odhl谩拧en铆"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startuje X Font Server (to je nezbytn茅 pro b臎h XFree)."
+msgid "Search servers"
+msgstr "Vyhledat servery"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Nahr谩t ovlada膷e pro usb za艡铆zen铆."
+msgid "NCP queue name missing!"
+msgstr "Chyb铆 n谩zev tiskov茅 fronty pro NCP!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog je program pomoc铆 n臎ho啪 zaznamen谩v谩 mnoho d茅mon暖 spr谩vy do "
-"syst茅mov媒ch\n"
-"log soubor暖. Je dobr茅 m铆t spu拧t臎n媒 syslog."
+"Varov谩n铆, bylo detekov谩no jin茅 p艡ipojen铆 k Internetu, z艡ejm臎 je pou啪ita s铆钮"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukov媒 syst茅m p艡i startu"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM ozna膷en茅 \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Protokol rwho umo啪艌uje vzd谩len媒m u啪ivatel暖m z铆skat seznam\n"
-"v拧ech u啪ivatel暖 p艡ihl谩拧en媒ch na po膷铆ta膷i s d茅monem rwho (je to podobn茅\n"
-"slu啪b臎 finger)."
+"Ukl谩d谩 a obnovuje 'stav entropie' na po膷铆ta膷i, co啪 je pou啪铆v谩no pro\n"
+"kvalitn臎j拧铆 generaci n谩hodn媒ch 膷铆sel."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Protokol rusers umo啪艌uje u啪ivatel暖m s铆t臎 zjistit kdo je p艡ihl谩拧en na\n"
-"jin茅m po膷铆ta膷i."
+"Selhala kontrola souborov茅ho syst茅mu %s. Chcete opravit chyby? (pozor, m暖啪e "
+"doj铆t ke ztr谩t臎 dat)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umo啪艌uje u啪ivatel暖m s铆t臎 sledovat vyt铆啪en铆 jednotliv媒ch\n"
-"stroj暖 p艡ipojen媒ch k s铆ti."
+msgid "Turn your computer into a reliable server"
+msgstr "Vytvo艡te se sv茅ho po膷铆ta膷e spolehliv媒 server."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"D茅mon routed umo啪艌uje automaticky obnovovat sm臎rovac铆 tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu pou啪铆v谩 protokol RIP. Zat铆mco RIP je b臎啪n臎 pou啪铆v谩n\n"
-"v mal媒ch s铆t铆ch, pro slo啪it臎j拧铆 s铆t臎 je zapot艡eb铆 slo啪it臎j拧铆 protokoly."
+msgid " (driver %s)"
+msgstr " (ovlada膷 %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"P艡i艡azuje p艡铆m谩 za艡铆zen铆 blokov媒m (nap艡铆klad diskov茅 odd铆ly)\n"
-"pro aplikace jako je Oracle nebo DVD p艡ehr谩va膷"
+"Loopback soubor(y): \n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukl谩d谩 a obnovuje 'stav entropie' na po膷铆ta膷i, co啪 je pou啪铆v谩no pro\n"
-"kvalitn臎j拧铆 generaci n谩hodn媒ch 膷铆sel."
+msgid "I don't know"
+msgstr "Nev铆m"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix je program pro doru膷ov谩n铆 po拧ty z jednoho po膷铆ta膷e na jin媒."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP hostitel \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Portmapper spravuje RPC spojen铆, kter谩 jsou pou啪铆v谩na protokoly jako NFS\n"
-"a NIS. Portmap server mus铆 b媒t spu拧t臎n na po膷铆ta膷铆ch, kter茅 funguj铆 jako\n"
-"servery pro protokoly, kter茅 pou啪铆vaj铆 mechanismus RPC."
+"Zde m暖啪ete nastavit disketu pro automatickou instalaci. Tato volba je n臎kdy "
+"nebezpe膷n谩 a m臎la by se pou啪铆vat s opatrnost铆.\n"
+"\n"
+"Tato disketa dovoluje zopakovat instalaci, kter谩 ji啪 na tomto po膷铆ta膷i byla "
+"provedena s t铆m, 啪e v n臎kter媒ch kroc铆ch lze zadat jin茅 hodnoty.\n"
+"\n"
+"Pro maxim谩ln铆 bezpe膷nost nen铆 rozd臎lov谩n铆 disk暖 ani form谩tov谩n铆 prov谩d臎no "
+"automaticky, i p艡esto, pokud to p艡i instalaci zvol铆te.\n"
+"\n"
+"Chcete pokra膷ovat?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Podpora PCMCIA v臎t拧inou znamen谩 podporu za艡铆zen铆 jako s铆钮ov茅 karty a\n"
-"modemy v laptopech. Nespust铆 se pokud ji p艡铆mo nenastav铆te, ale nen铆 "
-"probl茅m\n"
-"j铆 m铆t nainstalovanou i na po膷铆ta膷铆ch, kter茅 ji nepot艡ebuj铆."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibiln铆 wintisk谩rny."
+"\n"
+"\n"
+"Va拧e karta nyn铆 pou啪铆v谩 ovlada膷 %s\"%s\" (v媒choz铆 ovlada膷 pro va拧i kartu je "
+"\"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky nastav铆 podporu numerick茅 kl谩vesnice v konzoli\n"
-"a v XFree p艡i startu."
+msgid "Post Uninstall"
+msgstr "Nastaven铆 po odebr谩n铆"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je obl铆ben媒 protokol pro sd铆len铆 soubor暖 p艡es s铆t臎 TCP/IP.\n"
-"Tato slu啪ba poskytuje mo啪nost uzamyk谩n铆 soubor暖 na NFS."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je obl铆ben媒 protokol pro sd铆len铆 soubor暖 p艡es s铆t臎 TCP/IP.\n"
-"Tato slu啪ba poskytuje NFS server, jeho啪 nastaven铆 je v /etc/exports."
+msgid "Cpuid level"
+msgstr "Cpuid 煤rove艌"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje 膷i deaktivuje v拧echny s铆钮ov谩 rozhran铆, kter谩 maj铆 nastartovat p艡i\n"
-"startu syst茅mu."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolsk茅 (cyrilice)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"P艡ipojuje a odpojuje v拧echny s铆钮ov茅 (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"p艡铆pojn茅 body (mount points)."
+msgid "Add a module"
+msgstr "P艡idat modul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je dom茅nov媒 (DNS) server, kter媒 p艡ekl谩d谩 hostitelsk谩 jm茅na na "
-"IP adresy."
+msgid "Profile to delete:"
+msgstr "Smazat profil:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server pou啪铆van媒 pro sestaven铆 vysoce v媒konn茅ho\n"
-"a dostupn茅ho serveru."
+msgid "Local measure"
+msgstr "Lok谩ln铆 m臎艡铆tko"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskov媒 d茅mon, bez kter茅ho nebude fungovat lpr (program pro tisk).\n"
-"Je to server, kter媒 pos铆l谩 ti拧t臎n茅 dokumenty jednotliv媒m tisk谩rn谩m."
+msgid "busmouse"
+msgstr "Busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"LinuxConf prov谩d铆 r暖zn茅 煤koly p艡i spu拧t臎n铆 syst茅mu\n"
-"nutn茅 pro spr谩vu syst茅mov茅 konfigurace."
+msgid "Account Login (user name)"
+msgstr "V谩拧 煤膷et (u啪ivatelsk茅 jm茅no)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatick谩 detekce a konfigurace hardware p艡i spu拧t臎n铆."
+msgid "Fdiv bug"
+msgstr "Fdiv chyba"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Automatick谩 generace hlavi膷ky j谩dra v adres谩艡i /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
+"Nastaven铆 aplikace drakfirewall\n"
+"\n"
+"P艡edt铆m, ne啪 budete pokra膷ovat, se ujist臎te, 啪e jste nastavili va拧i\n"
+"s铆钮 a p艡铆stup k Internetu pomoc铆 aplikace drakconnect."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento bal铆膷ek nahraje zvolenou mapu kl谩vesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomoc铆 n谩stroje kbdconfig.\n"
-"Pro v臎t拧inu po膷铆ta膷暖 byste ji m臎li nechat zapnutou."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketov媒 filtr pro j谩dra 艡ady 2.2, kter媒 chr谩n铆 po膷铆ta膷\n"
-"proti 煤tok暖m ze s铆t臎."
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetov媒 superserver d茅mon (naz媒van媒 inetd) spou拧t铆 mnoho ostatn铆ch\n"
-"internetov媒ch slu啪eb, tak jak jsou zapot艡eb铆. Odpov铆d谩 za start nap艡.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete t铆m i ostatn铆\n"
-"slu啪by kter茅 spou拧t铆."
+msgid "Path selection"
+msgstr "V媒b臎r cesty"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je pou啪铆v谩n k poskytov谩n铆 HTML a CGI soubor暖."
+msgid "Name/IP address of host:"
+msgstr "N谩zev/IP adresa po膷铆ta膷e:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umo啪艌uje nov媒/zm臎n臎n媒\n"
-"hardware nastavit"
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"GPM p艡id谩v谩 do textov媒ch program暖 podporu my拧i (nap艡 pro Midnight "
-"Commander).\n"
-"M暖啪e tak茅 v konzoli prov谩d臎t operace 'vyjmi' a 'vlo啪' a ovl谩dat pop-up menu."
+"N臎co 拧patn茅ho se stalo s pevn媒m diskem. \n"
+"Test na integritu dat selhal. \n"
+"To znamen谩, 啪e z谩pis na tento disk m暖啪e skon膷it nep艡edv铆dan臎 a po拧kodit data."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardn铆 Unixov媒 program kter媒 spou拧t铆 u啪ivatelem zadan茅 programy\n"
-"v p艡edem definovan媒ch intervalech. vixie cron m谩 nav铆c mnoho vlastnost铆,\n"
-"v膷etn臎 vy拧拧铆 bezpe膷nosti a v铆ce mo啪nost铆 nastaven铆."
+msgid "Printer host name or IP missing!"
+msgstr "Chyb铆 n谩zev nebo IP adresa tisk谩rny!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Spou拧t铆 p艡铆kazy napl谩novan茅 p艡铆kazem na ur膷it媒 膷as p艡铆kazem 'at'.\n"
-"Tak茅 spou拧t铆 p艡铆kazy p艡i n铆zk茅m vyt铆啪en铆 syst茅mu."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Zvolte pros铆m v拧echny u啪ivatele, kter茅 chcete z谩lohovat."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"apmd je pou啪铆v谩n pro sledov谩n铆 stavu baterie a zaznamen谩v谩n铆 p艡es syslog.\n"
-"M暖啪e tak茅 b媒t pou啪it pro vypnut铆 po膷铆ta膷e p艡i vybit茅 baterii."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron - spou拧t铆 opakuj铆c铆 se akce"
+"Skener %s mus铆 b媒t nastaven pomoc铆 n谩stroje PrinterDrake.\n"
+"Spustit PrinterDrake lze z ovl谩dac铆ho centra Mandrake v sekci Hardware"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukov媒 syst茅m ALSA (Advanced Linux Sound Architecture)"
+msgid "Bangladesh"
+msgstr "Banglad茅拧"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instaluji bal铆膷ky..."
+msgid "Japan (cable)"
+msgstr "Japonsko (kabel)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Pou啪it铆: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"V铆tejte v Pr暖vodci nastaven铆m tisk谩rny\n"
+"\n"
+"Tento pr暖vodce v谩m pom暖啪e nainstalovat va拧i tisk谩rnu nebo tisk谩rny p艡ipojen茅 "
+"k tomuto po膷铆ta膷i, p艡铆mo k s铆ti, nebo sd铆len茅 na po膷铆ta膷i s Windows.\n"
+"\n"
+"Pokud m谩te tisk谩rnu nebo tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i, zapojte je "
+"pros铆m a zapn臎te je; pak mohou b媒t automaticky nalezeny. Va拧e s铆钮ov茅 "
+"tisk谩rny nebo tisk谩rny sd铆len茅 po膷铆ta膷i s Windows mus铆 b媒t rovn臎啪 zapnuty a "
+"p艡ipojen茅 k s铆ti, maj铆-li b媒t automaticky nalezeny.\n"
+"\n"
+"Automatick谩 detekce tisk谩ren p艡ipojen媒ch k s铆ti prob铆h谩 podstatn臎 d茅le ne啪 "
+"automatick谩 detekce tisk谩ren pouze lok谩ln臎 p艡ipojen媒ch k tomuto po膷铆ta膷i. "
+"Pokud nepot艡ebujete automatickou detekci tisk谩ren na s铆ti, nebo tisk谩ren "
+"sd铆len媒ch po膷铆ta膷i s Windows, pak tuto autodetekci vypn臎te.\n"
+"\n"
+"Pokud jste p艡ipraveni, klepn臎te na tla膷铆tko \"D谩le\", nebo klepn臎te na "
+"tla膷铆tko \"Zru拧it\" pokud nechcete v tuto chv铆li tisk谩rny nastavovat."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [v拧echno]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "Initial tests"
+msgstr "脷vodn铆 testy"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Continue"
+msgstr "Pokra膷ovat"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Custom Restore"
+msgstr "Vlastn铆 obnova"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[VOLBY]...\n"
-" -no-confirmation nepotvrzuje prvn铆 ot谩zku v re啪imu MandrakeUpdate\n"
-" --no-verify-rpm neprov谩d铆 ov臎艡en铆 podpisu u bal铆膷k暖\n"
-" --changelog-first v okn臎 s popisem nejd艡铆ve zobraz铆 changelog p艡ed "
-"seznamem soubor暖\n"
-" --merge-all-rpmnew navrhne spojit v拧echny nalezen茅 soubory .rpmnew/."
-"rpmsave"
+"\"Zvukov谩 karta\": pokud je detekov谩na v po膷铆ta膷i zvukov谩 karta, je zde\n"
+"zobrazena. Pokud ale vid铆te, 啪e zobrazen谩 karta nen铆 p艡esn臎 tak, kterou\n"
+"m谩te v po膷铆ta膷i, m暖啪ete klepnut铆m na tla膷铆tko vybrat jinou kartu a ovlada膷."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Podle sc茅n谩艡e"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[VOLBY]\n"
-"S铆钮 & p艡ipojen铆 k Internetu a monitorov谩n铆 aplikac铆\n"
-"\n"
-"--defaultintf interface: zobraz铆 v啪dy toto rozhran铆\n"
-"--connect : pokud nen铆 p艡ipojeno, provede p艡ipojen铆 k internetu\n"
-"--disconnect : pokud je p艡ipojeno, provede odpojen铆 od internetu\n"
-"--force : pou啪铆v谩 se s (p艡i)odpojen铆m : vynut铆 (p艡i)odpojen铆.\n"
-"--status : vr谩t铆 1 pokud je p艡ipojeno, jinak vrac铆 0 a skon膷铆.\n"
-"--quiet : tich媒 re啪im. Pou啪铆v谩 se p艡i (p艡i)odpojov谩n铆."
+msgid "Error reading file %s"
+msgstr "Chyba p艡i 膷ten铆 souboru %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "Nastaven铆 PLL :"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[kl谩vesnice]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Mus铆te m铆t FAT odd铆l p艡ipojen媒 na /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[VOLBY]\n"
-"Nastaven铆 pro Mandrake Terminal Server (MTS)\n"
-"--enable : povol铆 MTS\n"
-"--disable : zak谩啪e MTS\n"
-"--start : spust铆 MTS\n"
-"--stop : ukon膷铆 MTS\n"
-"--adduser : p艡id谩 existuj铆c铆ho u啪ivatele do MTS (vy啪aduje jm茅no "
-"u啪ivatele)\n"
-"--deluser : odebere existuj铆c铆ho u啪ivatele z MTS (vy啪aduje jm茅no "
-"u啪ivatele)\n"
-"--addclient : p艡id谩 klienta do MTS (vy啪aduje MAC adresu, IP, n谩zev nbi "
-"obrazu)\n"
-"--delclient : odebere klienta z MTS (vy啪aduje MAC address, IP, n谩zev "
-"nbi obrazu)"
+msgid " on "
+msgstr " na "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Import font暖 a monitoring aplikac铆\n"
-"--windows_import : provede import ze v拧ech dostupn媒ch odd铆l暖 s Windows.\n"
-"--xls_fonts : zobraz铆 v拧echny fonty, kter茅 ji啪 z xls existuj铆\n"
-"--strong : siln谩 verifikace font暖.\n"
-"--install : akceptuje libovoln媒 font z libovoln茅ho adres谩艡e.\n"
-"--uninstall : odinstaluje libovoln媒 font nebo libovoln媒 adres谩艡 s "
-"fonty.\n"
-"--replace : nahrad铆 ji啪 existuj铆c铆 fonty\n"
-"--application : 0 啪谩dn谩 aplikace.\n"
-" : 1 v拧echny dostupn茅 podporovan茅 aplikace.\n"
-" : nazev_aplikace jako nap艡. so pro staroffice \n"
-" : a gs pro ghostscript."
+msgid "The URL must begin with http:// or https://"
+msgstr "URL mus铆 za膷铆nat znaky http:// nebo https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[VOLBY] [NAZEV_PROGRAMU]\n"
-"\n"
-"[VOLBY]:\n"
-" --help - vyp铆拧e tuto n谩pov臎du.\n"
-" --report - program m暖啪e b媒t libovoln媒 mandrake n谩stroj\n"
-" --incident - program m暖啪e b媒t libovoln媒 mandrake n谩stroj"
+"Zde lze p艡铆mo zadat URI pro p艡铆stup k tisk谩rn臎. URI mus铆 spl艌ovat bu膹 "
+"specifikaci CUPS nebo Foomatic. Tak茅 pamatujte na to, 啪e v拧echny URI nejsou "
+"podporov谩ny ve v拧ech tiskov媒ch spr谩vc铆ch."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Jin媒 syst茅m (SunOs...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Instalace/Aktualizace"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d bal铆膷k暖(y)"
#: ../../standalone.pm:1
#, c-format
@@ -7328,4852 +6844,5304 @@ msgstr ""
"--help : zobraz铆 tuto zpr谩vu.\n"
"--version : zobraz铆 膷铆slo verze.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Vy啪adov谩no Ov臎艡en铆 Dom茅ny"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Tento program je svobodn媒 software; m暖啪ete ho 拧铆艡it a/nebo modifikovat\n"
-"podle specifikace GNU General Public Licence, kter谩 byla publikov谩na\n"
-"Free Software Foundation; bu膹 verze 2, nebo (podle volby) pozd臎j拧铆 verze.\n"
"\n"
-"Tento program je distribuov谩n s nad臎j铆, 啪e bude u啪ite膷n媒,\n"
-"ale BEZ JAK脻CHKOLIV Z脕RUK; BEZ N脕ROKU NA PROFIT. V铆ce detail暖 naleznete\n"
-"v licenci GNU General Public Licence.\n"
"\n"
-"Kopii GNU General Public Licence m暖啪ete obdr啪et bu膹 s t铆mto programem\n"
-"nebo si o n铆 m暖啪ete napsat na adresu Free Software Foundation, Inc.,\n"
-"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Ukon膷en铆 instalace"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Aktualizace syst茅mu"
+" Pod臎kov谩n铆:\n"
+"\t- LTSP Projekt http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Nastaven铆 slu啪eb"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Nastaven铆 X"
+msgid "Use libsafe for servers"
+msgstr "Pou啪铆t libsafe pro servery"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Zav谩d臎c铆 program"
+msgid "Icelandic"
+msgstr "Islandsk茅"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Nastaven铆 s铆t铆"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Pou啪it铆: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "P艡id谩n铆 u啪ivatele"
+msgid "Please relog into %s to activate the changes"
+msgstr "Pro aktivaci zm臎n se pros铆m znovu p艡ihlaste na %s"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Hlavn铆(root) heslo"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-2,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Instalace syst茅mu"
+msgid "Lilo/grub mode"
+msgstr "Re啪im Lilo/Grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "V媒b臎r bal铆膷k暖 pro instalaci"
+msgid "Output"
+msgstr "V媒stup"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Form谩tov谩n铆 odd铆l暖"
+msgid "Circular mounts %s\n"
+msgstr "Propleten茅 p艡铆pojn茅 body %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Rozd臎len铆 disku"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "V媒b臎r kl谩vesnice"
+msgid "HardDrive / NFS"
+msgstr "Pevn媒 disk / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Volba typu instalace"
+msgid "a number"
+msgstr "膷铆slo"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Detekce pevn媒ch disk暖"
+msgid "Swedish"
+msgstr "艩v茅dsk茅"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Nastaven铆 my拧i"
+msgid "Which %s driver should I try?"
+msgstr "Kter媒 %s ovlada膷 m谩m zkusit?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licence"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Pokud jedna z vybran媒ch slu啪eb nepob臎啪铆, obdr啪铆te varovnou zpr谩vu"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "V媒b臎r jazyka"
+msgid "Filesystem types:"
+msgstr "Souborov茅 syst茅my:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", multifunk膷n铆 za艡铆zen铆 na HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Northern Mariana Islands"
+msgstr "Northern Mariana Islands"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "沤谩dn谩"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
+msgid "user :"
+msgstr "u啪ivatel :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instala膷n铆 ovlada膷 pro obrazovku)"
+msgid "Please enter your password"
+msgstr "Zadejte sv茅 heslo"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"S XFree %s m暖啪e va拧e karta vyu啪铆t 3D hardwarov茅 akcelerace.\n"
-" TOTO JE POUZE EXPERIMENT脕LN脥 VERZE, A M女沤E V脡ST K NESTABILIT臍 SYST脡MU."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENT脕LN脥 3D hardwarovou akcelerac铆"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "S XFree %s m暖啪e va拧e karta vyu啪铆t 3D hardwarov茅 akcelerace."
+"Zadejte n谩zev vytv谩艡en茅ho profilu (nov媒 profil je vytvo艡en jako kopie "
+"vybran茅ho) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s hardwarovou 3D akcelerac铆"
+msgid "Floppy"
+msgstr "Disketa"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va拧e karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
-"TOTO JE POUZE EXPERIMENT脕LN脥 VERZE, A M女沤E V脡ST K NESTABILIT臍 SYST脡MU.\n"
-"Va拧e karta je podporov谩na i v XFree %s, kde m暖啪e m铆t lep拧铆 podporu pro 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Zatrhn臎te, pokud chcete va拧e CDRW m茅dium smazat (p艡i prvn铆m sezen铆)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va拧e karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
-"Pokud pou啪ijete XFree %s, m暖啪ete na druhou stranu dos谩hnout lep拧铆ch v媒sledk暖 "
-"ve 2D."
+msgid "Ghostscript referencing"
+msgstr "Odkazy na Ghostscript"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Zav谩d臎c铆 program"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigurovat pouze kartu \"%s\"%s"
+msgid "Move"
+msgstr "P艡esunout"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Pou啪铆t roz拧铆艡en铆 Xinerama"
+msgid "Bootloader to use"
+msgstr "Zav谩d臎c铆 program"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigurovat v拧echny monitory nez谩visle"
+msgid "SMB server host"
+msgstr "N谩zev SMB serveru"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kter茅 XFree by jste cht臎li pou啪铆t?"
+msgid "Name Servers:"
+msgstr "Jmenn茅 servery:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Nastaven铆 XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Varov谩n铆\n"
+"\n"
+"P艡e膷t臎te si pros铆m pozorn臎 n谩sleduj铆c铆 term铆ny. Pokud s nimi nesouhlas铆te,\n"
+"nejste opr谩vn臎n pokra膷ovat v instalaci n谩sleduj铆c铆m CD. Stiskn臎te\n"
+"\"Odm铆tnout\" pro pokra膷ov谩n铆 v instalaci bez tohoto m茅dia.\n"
+"\n"
+"\n"
+"N臎kter茅 programy na dal拧铆m CD m茅diu nejsou 拧铆艡eny podle licence GPL 膷i\n"
+"podobn茅. Ka啪d媒 z t臎chto program暖 je 拧铆艡en podle vlastn铆 licence a podm铆nek.\n"
+"膶tete pozorn臎 tyto licence a podm铆nky p艡ed t铆m, ne啪 za膷nete dan媒 software\n"
+"pou啪铆vat nebo 拧铆艡it.\n"
+"N臎kter茅 licence zakazuj铆 p艡en谩拧en铆, vytv谩艡en铆 duplik谩t暖 (mimo z谩lo啪n铆 "
+"kopii),\n"
+"dal拧铆 拧铆艡en铆, dekompilaci, reverzn铆 engineering nebo modifikaci komponent.\n"
+"Ka啪d茅 poru拧en铆 podm铆nek okam啪it臎 p艡eru拧uje va拧e pr谩va podle dan茅 licence.\n"
+"I kdy啪 dan茅 licence d谩vaj铆 n臎jak谩 pr谩va, nen铆 dovoleno instalovat dan媒\n"
+"program na v铆ce syst茅m暖, p艡izp暖sobovat ho provozu na s铆ti. V p艡铆pad臎\n"
+"pochybnost铆 kontaktujte distributora nebo v媒robce dan茅ho programu.\n"
+"P艡enech谩n铆 pr谩v t艡et铆m osob谩m nebo kop铆rov谩n铆 膷谩sti komponent 膷i\n"
+"dokumentace je tak茅 zak谩z谩no.\n"
+"\n"
+"\n"
+"V拧echna pr谩va na programy na dal拧铆m CD m茅diu pat艡铆 jej铆m pr谩voplatn媒m\n"
+"vlastn铆k暖m podle autorsk茅ho z谩kona.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Kolik pam臎ti je na va拧铆 grafick茅 kart臎 ?"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Odebrat tisk谩rnu ze Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"V谩拧 syst茅m podporuje zobrazen铆 na dvou monitorech.\n"
-"Co chcete d臎lat?"
+"Linux Virtual Server pou啪铆van媒 pro sestaven铆 vysoce v媒konn茅ho\n"
+"a dostupn茅ho serveru."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitor暖"
+msgid "4 billion colors (32 bits)"
+msgstr "4 miliardy barev (32 bit暖)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Zvolte X server"
+msgid "Micronesia"
+msgstr "Mikron茅sie"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X server"
+msgid "License"
+msgstr "Licence"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB nebo v铆ce"
+msgid "This may take a moment to generate the keys."
+msgstr "Generov谩n铆 kl铆膷暖 m暖啪e chv铆li trvat."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Autodetekce tisk谩rny (lok谩ln铆, TCP/soket, a tisk谩rny SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (pomoc铆 pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Stala se chyba - nebylo nalezeno 啪谩dn茅 za艡铆zen铆 na kter茅m by se daly "
+"vytvo艡it nov茅 souborov茅 syst茅my. Zkontrolujte pros铆m hardware"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Spustit tiskov媒 syst茅m p艡i startu syst茅mu"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Chcete se automaticky p艡ipojovat po startu po膷铆ta膷e?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "ID procesoru"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "艠e拧en铆 probl茅m暖 se zvukem"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polsk茅 (rozlo啪en铆 QWERTY)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "aktivovat nyn铆"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Zachovat zm臎ny?\n"
-"Aktu谩ln铆 konfigurace je:\n"
"\n"
-"%s"
+"Aktivity programu DrakBackup skrze CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Volby"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Pokou拧铆te se instalovat tiskov媒 syst茅m %s na po膷铆ta膷, b臎啪铆c铆 v bezpe膷nost铆 "
+"煤rovni %s.\n"
+"\n"
+"Tiskov媒 syst茅m pracuje jako d茅mon (proces na pozad铆), kter媒 膷ek谩 na tiskov茅 "
+"煤lohy a zpracov谩v谩 je. Tento d茅mon je tak茅 p艡铆stupn媒 ze s铆t臎 pro jin茅 "
+"po膷铆ta膷e, tak啪e se m暖啪e st谩t p艡edm臎tem s铆钮ov茅ho 煤toku. Proto je vybr谩no "
+"pouze n臎kolik slu啪eb, kter茅 jsou v t茅to 煤rovni spu拧t臎ny automaticky p艡i "
+"startu.\n"
+"\n"
+"Chcete opravdu nastavit tiskov媒 syst茅m na tomto po膷铆ta膷i?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Po膷铆ta膷 \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Rozli拧en铆"
+msgid "This partition can't be used for loopback"
+msgstr "Tento odd铆l nem暖啪e b媒t pou啪it pro loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Soubor u啪 existuje. M谩m ho pou啪铆t?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafick谩 karta"
+msgid "received: "
+msgstr "p艡ijato: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertik谩ln铆(obrazovkov谩) synchronizace"
+msgid "Right Alt key"
+msgstr "Prav谩 kl谩vesa Alt"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizont谩ln铆(艡谩dkov谩) synchronizace"
+msgid "the list of alternative drivers for this sound card"
+msgstr "seznam alternativn铆ch ovlada膷暖 pro va拧i zvukovou kartu"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhoduj铆c铆 parametry jsou: vertik谩ln铆 synchroniza膷n铆 frekvence, co啪 je\n"
-"frekvence, kterou je obnovov谩na cel谩 obrazovka, a frekvence 艡谩dkov茅\n"
-" synchronizace (horiz. sync. rate), co啪 je frekvence jakou jsou zobrazov谩ny\n"
-"jednotliv茅 mikro艡谩dky (scanline).\n"
-"\n"
-"Je VELMI D女LE沤IT脡 abyste nezvolili typ monitoru se schopnostmi vy拧拧铆mi ne啪 "
-"m谩\n"
-"v谩拧 monitor, proto啪e byste si ho t铆m mohli po拧kodit. Jestli啪e si nejste "
-"jist铆\n"
-"zvolte rad臎ji typ s ni啪拧铆mi schopnostmi."
+msgid "Gateway"
+msgstr "Br谩na(gateway)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play detekce selhala. Vyberte pros铆m p艡esn媒 monitor"
+msgid "Scanner sharing"
+msgstr "Sd铆len铆 skeneru"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Dodavatel"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunisko"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Zvolte typ monitoru"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafick谩 karta: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Klepn臎te na za艡铆zen铆 v lev茅 膷谩sti stromu a zobraz铆te zde o n臎m informace."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozli拧en铆 a barevnou hloubku"
+msgid "XawTV isn't installed!"
+msgstr "Aplikace XawTV nen铆 nainstalovan谩!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Rozli拧en铆"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Vytvo艡it/P艡en茅st\n"
+"z谩lo啪n铆 kl铆膷e pro SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy barev (32 bit暖)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Nezahrnout kritick茅 soubory (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 mili贸n暖 barev (24 bit暖)"
+msgid "old static device name used in dev package"
+msgstr "star媒, statick媒 n谩zev za艡铆zen铆, kter媒 se pou啪铆v谩 v bal铆膷ku dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tis铆c barev (16 bit暖)"
+msgid "This label is already used"
+msgstr "Tato zna膷ka se ji啪 pou啪铆v谩"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tis铆c barev (15 bit暖)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"V铆tejte v Pr暖vodci nastaven铆m tisk谩rny\n"
+"\n"
+"Tento pr暖vodce v谩m pom暖啪e nainstalovat va拧i tisk谩rnu nebo tisk谩rny p艡ipojen茅 "
+"k tomuto po膷铆ta膷i nebo p艡铆mo k s铆ti.\n"
+"\n"
+"Pokud m谩te tisk谩rnu nebo tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i, zapojte je "
+"pros铆m a zapn臎te je; pak mohou b媒t automaticky nalezeny. Va拧e s铆钮ov茅 "
+"tisk谩rny mus铆 b媒t rovn臎啪 zapnuty a p艡ipojen茅 k s铆ti, maj铆-li b媒t automaticky "
+"nalezeny.\n"
+"\n"
+"Automatick谩 detekce tisk谩ren p艡ipojen媒ch k s铆ti prob铆h谩 podstatn臎 d茅le ne啪 "
+"automatick谩 detekce tisk谩ren pouze lok谩ln臎 p艡ipojen媒ch k tomuto po膷铆ta膷i. "
+"Pokud nepot艡ebujete automatickou detekci tisk谩ren na s铆ti, pak tuto "
+"autodetekci vypn臎te.\n"
+"\n"
+"Pokud jste p艡ipraveni, klepn臎te na tla膷铆tko \"D谩le\", nebo klepn臎te na "
+"tla膷铆tko \"Zru拧it\" pokud nechcete v tuto chv铆li tisk谩rny nastavovat."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bit暖)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Kdy啪 naform谩tujete odd铆l %s, ztrat铆te t铆m v拧echna jeho data"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Je toto spr谩vn茅 nastaven铆?"
+msgid "Connection Time: "
+msgstr "Doba p艡ipojen铆: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skon膷铆 za %d sekund"
+msgid "select perm file to see/edit"
+msgstr "vyberte soubor s opr谩vn臎n铆m pro zobrazen铆/煤pravy"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Vyskytla se chyba:\n"
-"%s\n"
-"Zkuste zm臎nit n臎kter茅 parametry"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varov谩n铆: test na t茅to grafick茅 kart臎 m暖啪e zp暖sobit zatuhnut铆 po膷铆ta膷e"
+"Vlo啪te pros铆m Instala膷n铆 CD-ROM do mechaniky a stiskn臎te Ok.\n"
+"Pokud CD nem谩te, stiskn臎te Zru拧it pro p艡eru拧en铆 aktualizace syst茅mu."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkou拧et nastaven铆?"
+msgid "Use group id for execution"
+msgstr "Pou啪铆t p艡i spu拧t臎n铆 ID skupiny"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Vyzkou拧et nastaven铆"
+msgid "Choose the default user:"
+msgstr "Zvolte standardn铆ho u啪ivatele:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Jakou normu v谩拧 televizor pou啪铆v谩?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Va拧e grafick谩 karta z艡ejm臎 disponuje konektorem pro TV-OUT.\n"
-"Tento konektor m暖啪e b媒t zprovozn臎n pou啪it铆m tzv. frame bufferu.\n"
"\n"
-"Aby to bylo mo啪n茅, budete muset napojit svou grafickou kartu na televizn铆 "
-"p艡ij铆ma膷, a to je拧t臎 ne啪 zapnete v谩拧 po膷铆ta膷.\n"
-"Pot茅 vyberte ve va拧em zavad臎膷i polo啪ku \"TV out\".\n"
-"\n"
-"M谩 va拧e karta tuto vlastnost?"
+"V p艡铆pad臎 vzd谩len茅ho CUPS serveru nemus铆te nastavovat tisk谩rny zde,\n"
+"tisk谩rny budou automaticky detekov谩ny."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"M暖啪u nastavit v谩拧 po膷铆ta膷 tak, aby automaticky spustil X p艡i startu.\n"
-"Chcete aby po膷铆ta膷 po zapnut铆 spustil grafick媒 re啪im?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Spou拧t铆 se X"
+"Mandrake Linux podporuje v铆ce jazyk暖. M暖啪ete si zvolit dal拧铆 jazyky,\n"
+"kter茅 budou dostupn茅 po instalaci a n谩sledn茅m restartu syst茅mu."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovlada膷: %s\n"
+msgid "Domain"
+msgstr "Dom茅na"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Pokud je t艡eba, up艡esn臎te velikost pam臎ti (nalezeno %d MB)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozli拧en铆: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO a Grub jsou zavad臎膷e syst茅mu. Tato 膷谩st je b臎啪n臎 pln臎 automatick谩.\n"
+"DrakX analyzuje zav谩d臎c铆 sektor disku a zachov谩 se podle toho, co zde\n"
+"nalezne:\n"
+"\n"
+" * pokud nalezne zav谩d臎c铆 sektor Windows, p艡ep铆拧e ho sektorem pro LILO/Grub\n"
+"tak, aby bylo mo啪n茅 spou拧t臎t jak syst茅m Windows tak i Linux;\n"
+"\n"
+" * pokud nalezne zav谩d臎c铆 sektor pro LILO nebo Grub, tak jej p艡ep铆拧e nov媒m.\n"
+"\n"
+"Pokud instala膷n铆 program nedok谩啪e rozhodnout, zept谩 se na to, kam m谩 "
+"zavad臎膷\n"
+"um铆stit.\n"
+"\n"
+"\"Spou拧t臎c铆 za艡铆zen铆\": ve v臎t拧in臎 p艡铆pad暖 nen铆 nutn茅 m臎nit v媒choz铆\n"
+"nastaven铆 (\"Prvn铆 sektor disku (MBR)\"), ale zavad臎膷 lze nainstalovat na \n"
+"druh媒 disk (\"/dev/hdb\") nebo dokonce na disketu (\"Na disketu\")."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barevn谩 hloubka: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS poskytovatele 膷.2 (voliteln茅)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Pam臎钮 na gr. kart臎: %s kB\n"
+msgid "Boot device"
+msgstr "Startovac铆 za艡铆zen铆"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafick谩 karta: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Na kter茅m odd铆lu chcete m臎nit velikost?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertik谩ln铆 frekvence monitoru: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Spojen茅 st谩ty (Minor Outlying Islands)"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizont谩ln铆 frekvence monitoru: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "N谩stroj na sledov谩n铆 log暖"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "D啪ibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "P艡铆pojen铆 my拧i: %s\n"
+msgid "detected on port %s"
+msgstr "detekov谩no na portu %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my拧i: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Rozlo啪en铆 kl谩vesnice: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Grafick谩 karta: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Adres谩艡 p艡ipojen铆 (mount point): "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Zvolte pokud pou啪铆v谩te za艡铆zen铆 DVD-RAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Splash selection"
+msgstr "V媒b臎r zav谩d臎c铆ho obr谩zku"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL mus铆 za膷铆nat znaky http:// nebo https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Roz拧铆艡en茅 diskov茅 odd铆ly nejsou na tomto syst茅mu podporov谩ny"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Zadejte pros铆m URL serveru WebDAV"
+msgid "ISDN Configuration"
+msgstr "Nastaven铆 ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "P艡铆pojn媒 bod"
+msgid "high"
+msgstr "vysok谩"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "Internet Connection Sharing"
+msgstr "Sd铆len铆 Internetov茅ho P艡ipojen铆"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "P艡ipojit"
+msgid "Choose file"
+msgstr "Vyberte soubor"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Odpojit"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Varov谩n铆! Bylo nalezeno existuj铆c铆 nastaven铆 firewallu. Po instalaci m暖啪e "
+"b媒t zapot艡eb铆 n臎jak谩 ru膷n铆 煤prava."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Nov媒"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Tisk/P艡铆stup k foto kart谩m na \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV je protokol, kter媒 umo啪艌uje p艡ipojit webov媒 adres谩艡 jako lok谩ln铆, "
-"kter媒\n"
-"se potom tv谩艡铆 jako lok谩ln铆 souborov媒 syst茅m (takov媒 webov媒 server mus铆 "
-"b媒t)\n"
-"nastaven jako WebDAV server). Pokud chcete p艡idat WebDAV p艡ipojen铆, vyberte\n"
-"polo啪ku \"Nov媒\"."
+"Chcete povolit tisk na tisk谩rn谩ch vypsan媒ch v媒拧e nebo na tisk谩rn谩ch v "
+"lok谩ln铆 s铆ti?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "M铆sto toho pou啪ijte ``%s''"
+msgid "Printer default settings"
+msgstr "V媒choz铆 nastaven铆 tisk谩rny"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Zm臎nit typ"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Standardn铆 PS2 my拧 s kole膷kem"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve pou啪ijte ''Odpojit''"
+msgid "Removing old printer \"%s\"..."
+msgstr "Odeb铆r谩m starou tisk谩rnu \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Smazat"
+msgid "Select a device !"
+msgstr "Zvolte za艡铆zen铆 !"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Vytvo艡it"
+msgid "Remove selected server"
+msgstr "Odstranit vybran媒 server"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Souborov茅 syst茅my:"
+msgid "French Southern Territories"
+msgstr "Francouzsk谩 ji啪n铆 teritoria"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Pr谩zdn媒"
+msgid "the vendor name of the processor"
+msgstr "jm茅no dodavatele procesoru"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "V拧echna data z tohoto odd铆lu by m臎la b媒t z谩lohov谩na"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Instaluji bal铆膷ek %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOs"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Testuji za艡铆zen铆 a nastavuji HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Odkl谩dac铆 (swap)"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Abyste mohli m铆t v铆ce odd铆l暖, mus铆te smazat jeden existuj铆c铆 a na jeho "
+"m铆st臎\n"
+"vytvo艡it roz拧铆艡en媒 (extended) odd铆l"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "沤urn谩lovac铆 FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Va拧e tisk谩rna byla automaticky nastavena tak, 啪e m谩te ze sv茅ho PC p艡铆stup ke "
+"膷te膷ce karty. Nyn铆 m暖啪ete p艡istupovat ke sv媒m fotografick媒m kart谩m pomoc铆 "
+"grafick茅ho programu \"MtoolsFM\" (Menu: \"Aplikace\" -> \"Souborov茅 n谩stroje"
+"\" -> \"Spr谩vce soubor暖 MTools\") nebo z p艡铆kazov茅 艡谩dky pomoc铆 n谩stroje "
+"\"mtools\" (zadejte \"man mtools\", chcete-li z铆skat v铆ce informac铆). "
+"Souborov媒 syst茅m va拧i karty naleznete pod p铆smenem za艡铆zen铆 \"p:\", p艡铆padn臎 "
+"dal拧铆ch p铆smenech, pokud m谩te v铆ce tisk谩ren HP se 膷te膷kou karet. V programu "
+"\"MtoolsFM\" m暖啪ete p艡ep铆nat mezi p铆smeny za艡铆zen铆 pomoc铆 pol铆膷ka v prav茅m "
+"horn铆m rohu ka啪d茅ho v媒膷tu soubor暖."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "V媒b臎r bal铆膷k暖 pro instalaci"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Nenalezeny 啪谩dn茅 pevn茅 disky!"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" N臎kter茅 chyby p艡i nastaven铆 po拧ty jsou zp暖sobeny\n"
+" 拧patnou konfigurac铆 programu postfix. Pro vy艡e拧en铆\n"
+" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Pros铆m klepn臎te na odd铆l"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "V艩ECHNY diskov茅 odd铆ly a data na disku %s budou zru拧ena"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"M谩te jeden velik媒 odd铆l\n"
-"(v臎t拧inou pou啪铆van媒 Microsoft Windows).\n"
-"Doporu膷uji v谩m nejprve zmen拧it tento odd铆l\n"
-"(klepn臎te na n臎j a potom na \"Zm臎nit velikost\")"
+"Na va拧em syst茅mu nen铆 dostatek m铆sta pro instalaci nebo aktualizaci (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Co ud臎l谩te ?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Ka啪d谩 tisk谩rna pot艡ebuje n谩zev (nap艡. \"tiskarna\"). Popis a um铆st臎n铆 nemus铆 "
+"b媒t vypln臎ny. Jsou to koment谩艡e pouze pro u啪ivatele."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"Tisk谩rna\": klepnut铆m na \"Nastavit\" se otev艡e pr暖vodce nastaven铆m.\n"
+"Jak nastavit tisk谩rnu se tak茅 dozv铆te z odpov铆daj铆c铆 kapitoly z p艡铆ru膷ky\n"
+"\"Za膷铆n谩me\". Rozhran铆 je podobn茅 tomu, kter茅 vid铆te p艡i instalaci."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Pr暖vodce"
+msgid "Bhutan"
+msgstr "Bh煤t谩n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jestli啪e chcete pou啪铆vat aboot, mus铆te nechat voln茅 m铆sto na za膷谩tku disku\n"
-"(2048 sektor暖 sta膷铆)"
+msgid "Network interface"
+msgstr "S铆钮ov茅 rozhran铆"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Z谩lohujte si nejd艡铆v sv谩 data, pros铆m"
+msgid "Reading printer data..."
+msgstr "Na膷铆t谩m data k tisku ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "膶t臎te pozorn臎!"
+msgid "Korean keyboard"
+msgstr "Korejsk谩 kl谩vesnice"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "艩ifrovac铆 kl铆膷 (znovu)"
+msgid "Not connected"
+msgstr "Nep艡ipojen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "艩ifrovac铆 kl铆膷"
+msgid "Greek"
+msgstr "艠eck茅"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "艩ifrovac铆 kl铆膷e se neshoduj铆"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Pokud je nastaven \\fIarg\\fP = ALL je povolena existence soubor /etc/issue\n"
+"a /etc/issue.net. Pokud je nastaven \\fP = NONE nen铆 povolen 啪谩dn媒\n"
+"soubor /etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts a Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Tento 拧ifrovac铆 kl铆膷 je p艡铆li拧 jednoduch媒 (mus铆 b媒t alespo艌 %d znak暖 dlouh媒)"
+"P艡enos 煤sp臎拧n媒!\n"
+"Mo啪n谩 budete cht铆t zkontrolovat, zda se m暖啪ete p艡ihl谩sit na server:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"bez dotazu na heslo."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Vyberte si 拧ifrovac铆 kl铆膷 pro souborov媒 syst茅m"
+msgid "Enable OF Boot?"
+msgstr "Povolit zavad臎膷 OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Kl铆膷 pro 拧ifrovan媒 souborov媒 syst茅m"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Nem暖啪ete pou啪铆t JFS pro odd铆l men拧铆 ne啪 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Typ: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Vertik谩ln铆 frekvence monitoru: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "na kan谩le %d id %d\n"
+msgid "path"
+msgstr "cesta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky odd铆l暖: %s\n"
+msgid "Mount point"
+msgstr "P艡铆pojn媒 bod"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Vyskytla se chyba:\n"
+"%s\n"
+"Zkuste zm臎nit n臎kter茅 parametry"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "Informace: "
+msgid "Restore system"
+msgstr "Obnovit syst茅m"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindr暖, %s hlav, %s sektor暖\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Zde je seznam po膷铆ta膷暖, na kter媒ch jsou p艡铆stupn茅 lok谩ln臎 p艡ipojen茅 skenery: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
+msgid "The DHCP end ip"
+msgstr "Konec p谩sma adres DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Pouze pro 膷ten铆"
+msgid "Another one"
+msgstr "Dal拧铆"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Za艡铆zen铆: "
+msgid "Drakbackup"
+msgstr "DrakBackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speci谩ln铆 Boostrap\n"
-"odd铆l je pro spu拧t臎n铆\n"
-"dal拧铆ho syst茅mu.\n"
+msgid "Colombia"
+msgstr "Kolumbie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Aktu谩ln铆 konfigurace pro '%s':\n"
"\n"
-"Tento odd铆l je odd铆l\n"
-"s ovlada膷i, je lep拧铆\n"
-"no nechat neporu拧en媒.\n"
+"S铆钮: %s\n"
+"IP adresa: %s\n"
+"IP atributy: %s\n"
+"Ovlada膷: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost bloku(chunk) %s\n"
+msgid "Details"
+msgstr "Detaily"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "脷rove艌 %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Z bezpe膷nostn铆ch d暖vod暖 bude spojen铆 ukon膷eno."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standardn铆 startovac铆 odd铆l\n"
-" (Pro MS-DOS, ne pro LILO)\n"
+msgid "Synchronization tool"
+msgstr "N谩stroj na synchronizaci"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking your system..."
+msgstr "Zkoum谩m v谩拧 po膷铆ta膷..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print"
+msgstr "Tisk"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"Loopback soubor(y): \n"
-" %s\n"
+"Vlo啪te p谩sku s n谩zvem %s\n"
+" do p谩skov茅 jednotky %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Mongolia"
+msgstr "Mongolsko"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "P艡ipojen媒\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "Nenaform谩tovan媒\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Naform谩tovan媒\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafick茅 rozhran铆"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
+msgid "Restore Users"
+msgstr "Obnovit u啪ivatele"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor暖"
+msgid "Encryption key for %s"
+msgstr "艩ifrovac铆 kl铆膷 pro %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper spravuje RPC spojen铆, kter谩 jsou pou啪铆v谩na protokoly jako NFS\n"
+"a NIS. Portmap server mus铆 b媒t spu拧t臎n na po膷铆ta膷铆ch, kter茅 funguj铆 jako\n"
+"servery pro protokoly, kter茅 pou啪铆vaj铆 mechanismus RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Za膷谩tek: sektor %s\n"
+msgid "Detected hardware"
+msgstr "Nalezen媒 hardware"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name: "
-msgstr "Jm茅no: "
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "P铆smeno v DOSu: %s (jenom odhad)\n"
+msgid "Myanmar (Burmese)"
+msgstr "Myamarsk茅 (Burnsk茅)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "odd铆l %s je nyn铆 rozpozn谩n jako %s"
+msgid "Enabling swap partition %s"
+msgstr "Aktivuji odkl谩dac铆 odd铆l %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Odstra艌uji %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Nejsou zde 啪谩dn茅 FAT odd铆ly, kter茅 by bylo pou啪铆t pro loopback (nebo nen铆 "
+"dostatek m铆sta)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Kop铆ruji %s"
+msgid "Armenian (old)"
+msgstr "Arm茅nsk茅 (star茅)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "P艡esunuji soubory na nov媒 diskov媒 odd铆l"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Tisk谩rna s n谩zvem \"%s\" ji啪 na stran臎 %s existuje.\n"
+"Klepn臎te na \"P艡en茅st\" pro p艡eps谩n铆.\n"
+"Tak茅 m暖啪ete napsat nov媒 n谩zev nebo ji p艡esko膷it."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Adres谩艡 %s ji啪 obsahuje n臎jak谩 data\n"
-"(%s)"
+"Nalezn臎te 艡e拧en铆 va拧ich probl茅m暖 pomoc铆 on-line platformy spole膷nosti "
+"MandrakeSoft pro podporu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Schovat soubory"
+msgid ", host \"%s\", port %s"
+msgstr ", po膷铆ta膷 \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "P艡esunout soubory na nov媒 diskov媒 odd铆l"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kdy啪 naform谩tujete odd铆l %s, ztrat铆te t铆m v拧echna jeho data"
+msgid "%s formatting of %s failed"
+msgstr "%s form谩tov谩n铆 %s skon膷ilo chybou"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se zm臎ny uplatnily budete muset restartovat po膷铆ta膷"
+msgid "Partitioning failed: %s"
+msgstr "Vytv谩艡en铆 diskov媒ch odd铆l暖 selhalo: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Bude zaps谩na nov谩 tabulka odd铆l暖 na disku %s!"
+msgid "Canada (cable)"
+msgstr "Kanada (kabel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Bal铆膷ek %s mus铆 b媒t nainstalov谩n. Chcete ho nainstalovat?"
+msgid "Upgrade"
+msgstr "Aktualizovat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Jak媒 typ diskov茅ho odd铆lu?"
+msgid "Workstation"
+msgstr "Pracovn铆 stanice"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Bu膹te opatrn铆: tato akce je nebezpe膷n谩."
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instaluji bal铆膷ek %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "chunk size"
-msgstr "Velikost bloku (chunk)"
+msgid "Kyrgyzstan"
+msgstr "Kyrgyzst谩n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "煤rove艌"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Z谩kladn铆 dokumentace (doporu膷eno!)"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../services.pm:1
#, c-format
-msgid "device"
-msgstr "za艡铆zen铆"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron - spou拧t铆 opakuj铆c铆 se akce"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Various"
-msgstr "Dal拧铆"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Mus铆te m铆t ko艡enov媒 odd铆l.\n"
+"K jeho vytvo艡en铆 mus铆te zvolit jeden existuj铆c铆 odd铆l\n"
+"(nebo vytvo艡it nov媒), zvolit 'P艡铆pojn媒 bod'\n"
+"a nastavit ho na '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Volby pro p艡ipojen铆"
+msgid "Proxy should be http://..."
+msgstr "Proxy by m臎la b媒t http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Soubor u啪 existuje. M谩m ho pou啪铆t?"
+msgid "South Africa"
+msgstr "Ji啪n铆 Afrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Soubor u啪 je pou啪铆v谩n jin媒m loopbackem, zvolte si jin媒"
+msgid "Western Sahara"
+msgstr "Z谩padn铆 Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Give a file name"
-msgstr "Zadejte n谩zev souboru"
+msgid "Etherboot Floppy/ISO"
+msgstr "Disketa Etherboot/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Souborov媒 syst茅m: "
+msgid "Modify printer configuration"
+msgstr "Zm臎nit nastaven铆 tisk谩rny"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
+msgid "Choose a partition"
+msgstr "Vyberte odd铆l"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "N谩zev souboru loopbacku:"
+msgid "Edit current rule"
+msgstr "Upravit sou膷asn茅 pravidlo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Tento odd铆l nem暖啪e b媒t pou啪it pro loopback"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+" Povol铆/Zak谩啪e zaznamen谩v谩n铆 podivn媒ch IPv4 paket暖."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "N谩zev pro LVM?"
+msgid "Please test the mouse"
+msgstr "Vyzkou拧ejte pros铆m, zda funguje my拧"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "nov媒"
+msgid "Other Media"
+msgstr "Dal拧铆 m茅dia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existuj铆c铆 LVM pro p艡id谩n铆"
+msgid "Backup system files"
+msgstr "Z谩lohovat syst茅mov茅 soubory"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existuj铆c铆 RAID pro p艡id谩n铆"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "P艡esouv谩m odd铆l..."
+msgid "Sector"
+msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Moving"
-msgstr "P艡esouv谩m"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na kter媒 sektor chcete odd铆l p艡esunout?"
+msgid "LDAP Base dn"
+msgstr "Z谩kladn铆 dn pro LDAP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sector"
-msgstr "Sektor"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Nem暖啪ete ozna膷it tento bal铆膷ek, proto啪e pro jeho instalaci nen铆 dost m铆sta"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na kter媒 disk chcete odd铆l p艡esunout?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Vytvo艡it disketu pro automatickou instalaci"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Move"
-msgstr "P艡esunout"
+msgid "Dialing mode"
+msgstr "Typ vyt谩膷en铆"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nov谩 velikost v MB: "
+msgid "File sharing"
+msgstr "Sd铆len铆 soubor暖"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
+msgid "Clean /tmp at each boot"
+msgstr "Vy膷istit /tmp p艡i ka啪d茅m startu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resize"
-msgstr "Zm臎nit velikost"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Kdy啪 zm臎n铆te velikost odd铆lu %s, ztrat铆te t铆m v拧echna jeho data"
+msgid "Please choose your type of mouse."
+msgstr "Vyberte si typ va拧铆 my拧i."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "V拧echna data z tohoto odd铆lu by m臎la b媒t z谩lohov谩na"
+msgid "class of hardware device"
+msgstr "t艡铆da hardwarov茅ho za艡铆zen铆"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskov茅m odd铆lu nelze m臎nit velikost"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
+"Zde jsou po膷铆ta膷e a s铆t臎, na kter媒ch budou dostupn茅 lok谩ln铆 tisk谩rna(y):"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Po膷铆t谩m hranice souborov茅ho syst茅mu fat"
+msgid "United Kingdom"
+msgstr "Velk谩 Brit谩nie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kam chcete p艡ipojit %s?"
+msgid "running"
+msgstr "spu拧t臎no"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem暖啪u smazat p艡铆pojn媒 bod, proto啪e tento odd铆l je pou啪铆v谩n pro loopback.\n"
-"Odstra艌te nejprve loopback"
+msgid "default"
+msgstr "p艡edvolen茅"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete p艡ipojit za艡铆zen铆 %s?"
+msgid "Indonesia"
+msgstr "Indon茅sie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kam chcete p艡ipojit loopback soubor %s?"
+msgid "France [SECAM]"
+msgstr "Francie [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "P艡ep铆n谩m z ext2 na ext3"
+msgid "restrict"
+msgstr "omezen铆"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Kter媒 souborov媒 syst茅m chcete pou啪铆t?"
+msgid "must have"
+msgstr "mus铆te m铆t"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Zm臎nit typ odd铆lu"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS nepodporuje tisk谩rny na serverech Novell nebo tisk谩rny, kter茅 pos铆laj铆 "
+"data na skupinu p艡铆kaz暖.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "T铆m 啪e zm臎n铆te typ odd铆lu %s p艡ijdete o v拧echna jeho data"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
+msgid "Command line"
+msgstr "P艡铆kazov谩 艡谩dka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Nem暖啪ete vytvo艡it nov媒 odd铆l\n"
-"(proto啪e jste ji啪 dos谩hli maxim谩ln铆ho po膷tu prim谩rn铆ch odd铆l暖).\n"
-"Nejprve odstra艌te n臎kter媒 prim谩rn铆 odd铆l a vytvo艡te odd铆l roz拧铆艡en媒."
+"N谩拧 elektronick媒 obchod nab铆z铆 ucelenou 艡adu na拧ich Linuxov媒ch 艡e拧en铆, "
+"stejn臎 jako speci谩ln铆 nab铆dky na拧ich produkt暖 a dal拧铆 \"lah暖dky\":"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Nastaven铆: "
+msgid "access to administrative files"
+msgstr "p艡铆stup k administrativn铆m soubor暖m"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Po膷谩te膷n铆 sektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Chyba p艡i pos铆l谩n铆 po拧ty\n"
+" V谩mi zvolen媒 report nebyl odesl谩n\n"
+" Prove膹te pros铆m nastaven铆 sendmailu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Vytvo艡it nov媒 odd铆l"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", multifunk膷n铆 za艡铆zen铆 na paraleln铆m portu \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Pou啪铆t loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumenty: (val)\n"
+"\n"
+"Nastav铆 膷as vypr拧en铆 pro shell. Nulov谩 hodnota znamen谩 啪谩dn媒 膷as."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Zm臎nit RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
+msgid "Swap"
+msgstr "Odkl谩dac铆 (swap)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "P艡idat do LVMu"
+msgid "Connecting to the Internet "
+msgstr "P艡ipojen铆 k Internetu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "P艡idat do RAIDu"
+msgid "Restore Other"
+msgstr "Obnovit ostatn铆"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Form谩tovat"
+msgid "TV card"
+msgstr "TV karta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Podrobn茅 informace"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Tisk谩rna na serveru Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Pokou拧铆m se obnovit tabulku odd铆l暖"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Vlo啪te disketu do mechaniky\n"
-"V拧echna data na t茅to disket臎 budou smaz谩na"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Varov谩n铆"
+"Argumenty: (umask)\n"
+"\n"
+"Nastavuje umask pro u啪ivatele root."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Zvolit soubor"
+msgid "Remove selected host/network"
+msgstr "Odstranit vybran媒 po膷铆ta膷/s铆钮"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Z谩lo啪n铆 tabulka odd铆l暖 nem谩 stejnou velikost\n"
-"Chcete p艡esto chcete pokra膷ovat?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr "Postfix je program pro doru膷ov谩n铆 po拧ty z jednoho po膷铆ta膷e na jin媒."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Automatick茅 p艡ipojov谩n铆 pro vyj铆mateln谩 m茅dia"
+msgid "Disconnection from the Internet failed."
+msgstr "Odpojen铆 z Internetu selhalo."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Znovu na膷铆st tabulku odd铆l暖"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Zde m暖啪ete vybrat kl谩vesu nebo kombinaci kl谩ves, kterou\n"
+"budete moci p艡ep铆nat rozlo啪en铆 znak暖 va拧铆 kl谩vesnice.\n"
+"(nap艡. mezi 膷esk媒m a americk媒m)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Z谩chrana tabulky odd铆l暖"
+msgid "Network Hotplugging"
+msgstr "Rychl茅 p艡ipojen铆 do s铆t臎"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Obnovit tabulku odd铆l暖"
+msgid "if set to yes, reports check result to tty."
+msgstr "pokud je nastaveno, pos铆l谩 v媒sledek kontroly na tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Ulo啪it tabulku odd铆l暖"
+msgid "Restore From CD"
+msgstr "Obnovit z CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Abyste mohli m铆t v铆ce odd铆l暖, mus铆te smazat jeden existuj铆c铆 a na jeho "
-"m铆st臎\n"
-"vytvo艡it roz拧铆艡en媒 (extended) odd铆l"
+"V谩拧 po膷铆ta膷 bude nastaven pro sd铆len铆 sv茅ho p艡ipojen铆 k Internetu.\n"
+"Tato vlastnost umo啪艌uje p艡铆stup dal拧铆ch po膷铆ta膷暖 na lok谩ln铆 s铆ti k s铆ti "
+"Internet p艡es p艡ipojen铆 tohoto po膷铆ta膷e.\n"
+"\n"
+"P艡ed pokra膷ov谩n铆m se ujist臎te, 啪e jste nastavili va拧i s铆钮 a p艡ipojen铆 k "
+"Internetu pomoc铆 aplikace drakconnect.\n"
+"\n"
+"Pozn.: Pro nastaven铆 lok谩ln铆 s铆t臎 (LAN) pot艡ebujete vyhrazen媒 s铆钮ov媒 adapt茅r."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Nem暖啪u p艡idat 啪谩dn媒 dal拧铆 odd铆l"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Vyberte si pros铆m, kter媒 s铆钮ov媒 adapt茅r chcete pou啪铆t pro p艡ipojen铆 k "
+"internetu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "V拧echny prim谩rn铆 odd铆ly (partitions) jsou pou啪铆v谩ny"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "P艡铆stup k pam臎钮ov茅 kart臎 na multifunk膷n铆m za艡铆zen铆 od HP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informace o pevn茅m disku"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Roz拧i艡te obzory sv茅ho po膷铆ta膷e s n臎kter媒mi z 拧irok茅 艡ady partner暖, kte艡铆 "
+"nab铆zej铆 profesion谩ln铆 slu啪by kompatibiln铆 s distribuc铆 Mandrake Linux."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Automaticky rozm铆stit"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je nyn铆 vypnuto."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "V拧e smazat"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "pokud je nastaveno, ov臎艡uje kontroln铆 sou膷et pro suid/sgid soubory."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete ulo啪it 煤pravy souboru /etc/fstab?"
+msgid "Latin American"
+msgstr "Latinsko-Americk茅"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skon膷it bez zaps谩n铆 do tabulky odd铆l暖?"
+msgid "Japanese text printing mode"
+msgstr "Tiskov媒 re啪im pro japonsk媒 text"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Konec bez ulo啪en铆"
+msgid "Old device file"
+msgstr "Star媒 soubor se za艡铆zen铆m"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "P艡esto chcete pokra膷ovat?"
+msgid "Info: "
+msgstr "Informace: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "P艡epnout se do m贸du 'expert'"
+msgid "Button `%s': %s"
+msgstr "Tla膷铆tko '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "P艡epnout se do m贸du 'norm谩ln铆'"
+msgid "Please wait"
+msgstr "Pros铆m po膷kejte"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Zp臎t"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Konec"
+msgid "None"
+msgstr "沤谩dn茅"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Vyberte odd铆l"
+msgid "The entered IP is not correct.\n"
+msgstr "Zadan谩 IP adresa nen铆 spr谩vn谩.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Vyberte jin媒 odd铆l"
+msgid "Ethernet Card"
+msgstr "Ethernetov谩 karta"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Zm臎nit typ"
+msgid "Info"
+msgstr "Informace"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Vyhledat servery"
+msgid "Install"
+msgstr "Instalace"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Dom茅na"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Klepn臎te na \"D谩le ->\", pokud chcete smazat v拧echna data a odd铆ly na tomto\n"
+"pevn茅m disku. Bu膹te opatrn铆, po odklepnut铆 nelze obnovit 啪谩dn谩 d艡铆v臎j拧铆 "
+"data\n"
+"ani odd铆ly a to i pro Windows.\n"
+"\n"
+"Klepnut铆m na \"<- Zp臎t\" zru拧铆te tuto operaci bez ztr谩ty dat a odd铆l暖 na "
+"disku."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "U啪ivatelsk茅 jm茅no"
+msgid "Exit install"
+msgstr "Ukon膷en铆 instalace"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Pros铆m zadejte sv茅 u啪ivatelsk茅 jm茅no, heslo a n谩zev dom茅ny, pod kter媒mi "
-"chcete p艡istupovat k tomuto po膷铆ta膷i."
+"V拧e se poda艡ilo nastavit.\n"
+"Nyn铆 lze pou啪铆t tento po膷铆ta膷 pro sd铆len铆 p艡ipojen铆 k Internetu pro va拧i "
+"lok谩ln铆 s铆钮, kter谩 pou啪铆v谩 automatickou konfiguraci s铆t臎 (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Vy啪adov谩no Ov臎艡en铆 Dom茅ny"
+msgid "Remote CUPS server"
+msgstr "Vzd谩len媒 CUPS server"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "Dal拧铆"
+msgid "Sun - Mouse"
+msgstr "Sun - my拧"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Kter茅 u啪ivatelsk茅 jm茅no"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Na va拧em syst茅mu je nastaveno pouze jedno s铆钮ov茅 rozhran铆:\n"
+"\n"
+"%s\n"
+"\n"
+"Na tomto adapt茅ru bude nastavena lok谩ln铆 s铆钮."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Nelze se p艡ihl谩sit pod u啪ivatelsk媒m jm茅nem %s (chybn茅 heslo?)"
+msgid "Minimal install"
+msgstr "Minim谩ln铆 instalace"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu #"
+msgid "Ethiopia"
+msgstr "Etiopie"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus kontrol茅r"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB kontrol茅r"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- za艡铆zen铆 PCI: ud谩v谩 slot PCI, za艡铆zen铆 a funkci t茅to karty\n"
+"- za艡铆zen铆 EIDE: za艡铆zen铆 je bu膹 master nebo slave\n"
+"- za艡铆zen铆 SCSI: ud谩v谩 ID sb臎rnice a za艡铆zen铆 SCSI"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI kontrol茅r"
+msgid "Total size: %d / %d MB"
+msgstr "Celkov谩 velikost: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire kontrol茅ry"
+msgid "disabled"
+msgstr "vypnuto"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontrol茅r"
+msgid "Search for new scanners"
+msgstr "Vyhled谩n铆 nov媒 skener暖"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "Zakazuji servery..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Skener"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Vyberte si interval mezi\n"
+"jednotliv媒mi z谩lohami"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Nezn谩m媒/Jin媒"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalace %s neusp臎la. Stala se tato chyba:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Syst茅mov茅 kontrol茅ry"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Nelze spustit mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Vybrali jste pro instalaci n谩sleduj铆c铆 server(y): %s\n"
+"\n"
+"\n"
+"Tyto servery budou standardn臎 aktivov谩ny. P艡esto啪e nen铆 zn谩m媒 啪谩dn媒\n"
+"bezpe膷nostn铆 probl茅m, mohou se p艡esto vyskytnout. Je proto d暖le啪it茅 "
+"aktualizovat\n"
+"v啪dy, kdy啪 je to pot艡eba.\n"
+"\n"
+"\n"
+"Chcete opravdu nainstalovat tyto servery?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernetov谩 karta"
+msgid "Network printer (TCP/Socket)"
+msgstr "S铆钮ov谩 tisk谩rna (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Procesory"
+msgid "Backup User files..."
+msgstr "Z谩lohovat soubory u啪ivatel暖..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webov谩 kamera"
+msgid "Install system"
+msgstr "Instalace syst茅mu"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Zvukov谩 karta"
+msgid "First DNS Server (optional)"
+msgstr "Prvn铆 DNS Server (nepovinn媒)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Dal拧铆 multimedi谩ln铆 za艡铆zen铆"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Jako alternativu m暖啪ete zadat do pol铆膷ka n谩zev za艡铆zen铆/n谩zev souboru"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV karta"
+msgid "dhcpd Config..."
+msgstr "Nastaven铆 dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Grafick谩 karta"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Nastaven铆 ji啪 bylo provedeno, ale nyn铆 je vypnuto."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "P谩ska"
+msgid "LILO/grub Installation"
+msgstr "Instalace LILO/Grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Izraelsk茅"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD vypalova膷ky"
+msgid "load setting"
+msgstr "nahr谩t volby"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Tisk谩rna \"%s\" na serveru \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disk"
+msgid "Floppy can be removed now"
+msgstr "Disketu nyn铆 m暖啪ete vyjmout"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minim谩ln铆 instalace"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disketa"
+msgid "Denmark"
+msgstr "D谩nsko"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Umo啪nit v媒b臎r ovlada膷e"
+msgid "Moving partition..."
+msgstr "P艡esouv谩m odd铆l..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Ovlada膷:"
+msgid "(This) DHCP Server IP"
+msgstr "Adresa DHCP serveru"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Pokud skute膷n臎 v铆te, kter媒 ovlada膷 je ten spr谩vn媒 pro va拧i kartu,\n"
-"m暖啪ete ho vybrat se seznamu.\n"
-"\n"
-"Aktu谩ln铆 ovlada膷 pro va拧i zvukovou kartu \"%s\" je \"%s\"."
+msgid "Test of the configuration"
+msgstr "Vyzkou拧et nastaven铆"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "V媒b臎r libovoln茅ho ovlada膷e"
+msgid "Installing %s ..."
+msgstr "Instaluji %s ..."
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Klasick媒 postup p艡i 艡e拧en铆 probl茅m暖 se zvukem je pomoc铆 t臎chto p艡铆kaz暖:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" v谩m 艡ekne, jak媒 ovlada膷 je v媒choz铆 pro\n"
-"danou zvukovou kartu\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" v谩m 艡ekne, kter媒 ovlada膷 se nyn铆\n"
-"pou啪铆v谩\n"
+"V z谩vislosti na tom, zda jste zvolili individu谩ln铆 v媒b臎r bal铆膷k暖, se "
+"nab铆dne\n"
+"stromov谩 struktura obsahuj铆c铆 v拧echny bal铆膷ky organizovan茅 do skupin\n"
+"a podskupin. P艡i proch谩zen铆 stromu m暖啪ete vybrat jednotliv茅 bal铆膷ky, "
+"podskupiny\n"
+"nebo cel茅 skupiny.\n"
"\n"
-"- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovlada膷) je nahr谩n nebo "
-"ne\n"
+"Pokud vyberete ze stromu bal铆膷ek, objev铆 se v prav茅 膷谩sti jeho popis.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" v谩m "
-"sd臎l铆\n"
-"zda je pro initlevel nastaveny slu啪by alsa a sound\n"
+"!! Pokud se nach谩z铆 mezi vybran媒mi bal铆膷ky serverov茅 programy, a钮 u啪 "
+"vybran茅\n"
+"z谩m臎rn臎 nebo jako sou膷谩st skupiny, zobraz铆 se dotaz na to,\n"
+"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
+"jsou tyto servery spu拧t臎ny p艡i startu syst茅mu. I kdy啪 v dob臎 vyd谩n铆 "
+"distribuce\n"
+"nejsou zn谩my 啪谩dn茅 bezpe膷nostn铆 probl茅my, mohou se vyskytnout pozd臎ji.\n"
+"Pokud nev铆te, k 膷emu jsou ur膷eny n臎kter茅 serverov茅 slu啪by, klepn臎te na \"Ne"
+"\".\n"
+"Klepnut铆m na \"Ano\" se dan茅 slu啪by nainstaluj铆 a automaticky spust铆 p艡i "
+"startu !!\n"
"\n"
-"- \"aumix -q\" v谩m 艡ekne, zda je zvuk ztlumen nebo ne\n"
+"Volba \"Automatick茅 z谩vislosti\" vypne varovn茅 hl谩拧en铆, kter茅 se objev铆\n"
+"v啪dy, kdy啪 vyberete bal铆膷ek, kter媒 m谩 dal拧铆 z谩vislosti a instala膷n铆 program\n"
+"mus铆 vybrat dal拧铆 pot艡ebn茅 bal铆膷ky, aby instalace mohla prob臎hnout 煤sp臎拧n臎.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" v谩m 艡ekne, kter媒 program pou啪铆v谩 zvukovou "
-"kartu.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "艠e拧en铆 probl茅m暖 se zvukem"
+"Mal谩 ikonka diskety dole umo啪艌uje nahr谩t ji啪 p艡edem vybran媒 seznam bal铆膷k暖.\n"
+"Po klepnut铆 na ikonu budete dot谩z谩ni na vlo啪en铆 diskety, kter谩 byla "
+"vytvo艡ena na\n"
+"konci jin茅 instalace. Ve druh茅m tipu p艡i posledn铆m kroku najdete n谩vod, jak "
+"si\n"
+"tuto disketu vytvo艡it. "
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Chyba: Ovlada膷 \"%s\" pro va拧i zvukovou kartu nen铆 na seznamu"
+msgid "Choose your filesystem encryption key"
+msgstr "Vyberte si 拧ifrovac铆 kl铆膷 pro souborov媒 syst茅m"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Nezn谩m媒 ovlada膷"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Vyberte pros铆m sv茅 za艡铆zen铆 CD/DVD.\n"
+"(Stisknut铆m kl谩vesy Enter p艡enesete nastaven铆 do ostatn铆ch pol铆.\n"
+"Toto pol铆膷ko nen铆 povinn茅, je to pouze n谩stroj pro vypln臎n铆 formul谩艡e.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Pro va拧i zvukovou kartu (%s) nen铆 啪谩dn媒 zn谩m媒 ovlada膷"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Nen铆 rozpozn谩n 啪谩dn媒 ovlada膷"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Pro va拧i zvukovou kartu (%s) nen铆 啪谩dn媒 vhodn媒 voln臎 pou啪iteln媒 ovlada膷, ale "
-"existuje alternativn铆 propriet谩rn铆 ovlada膷 na \"%s\"."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Nen铆 dostupn媒 啪谩dn媒 open source ovlada膷"
+msgid "(default value: %s)"
+msgstr "(v媒choz铆 hodnota: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "膶ekejte pros铆m... Aktivuji konfiguraci"
+msgid "Alternative test page (Letter)"
+msgstr "Alternativn铆 testovac铆 str谩nka (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Star拧铆 ovlada膷 \"%s\" je na 膷ern茅 listin臎.\n"
+"Nastaven铆 DHCP serveru.\n"
"\n"
-"Bylo u n臎j zji拧t臎no, 啪e p艡i odebr谩n铆 zp暖sob铆 p谩d j谩dra.\n"
+"Zde m暖啪ete vybrat r暖zn茅 volby nastaven铆 DHCP serveru.\n"
+"Pokud nev铆te, co kter谩 volba znamen谩, ponechte jej铆 v媒choz铆 hodnotu.\n"
"\n"
-"P艡i dal拧铆m spu拧t臎n铆 bude pou啪it pouze nov媒 ovlada膷 \"%s\" "
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "艠e拧en铆 probl茅m暖"
+msgid "Choose an X server"
+msgstr "Zvolte X server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Velikost odkl谩dac铆ho odd铆lu v MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Source Sound) bylo prvn铆 API pro zvuk. Nen铆 to API nez谩visl茅 na OS "
-"(je dostupn茅 ve v铆ce unixov媒ch syst茅mech), ale m谩 pouze z谩kladn铆 funkce a "
-"omezen茅 API.\n"
-"A co v铆ce, v拧echny OSS ovlada膷e \"vynal茅zaj铆 znovu kolo\".\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) je modul谩rn铆 architektura, kter谩 "
-"kter谩 podporuje daleko v铆ce ISA, USB a PCI karet.\n"
-"\n"
-"Tak茅 poskytuje daleko lep拧铆 API ne啪 OSS.\n"
-"\n"
-"Pokud chcete pou啪铆t alsa ovlada膷e, m暖啪ete pou啪铆t dva re啪imy:\n"
-"- star拧铆 re啪im kompatibility s OSS API\n"
-"- nov茅 ALSA API, kter茅 poskytuje daleko v铆ce mo啪nost铆, ale vy啪aduje pou啪铆t "
-"knihovnu ALSA.\n"
+"Jin茅 (ne pro drakbackup)\n"
+"kl铆膷e jsou ji啪 na m铆st臎"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Nejsou 啪谩dn茅 zm臎ny pro z谩lohov谩n铆!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Naform谩tovan媒\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Typ instalace"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Tisk谩rna \"%s\" na SMB/Windows serveru \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Va拧e karta nyn铆 pou啪铆v谩 ovlada膷 %s\"%s\" (v媒choz铆 ovlada膷 pro va拧i kartu je "
-"\"%s\")"
+"- D茅mon (%s) zahrnuje :\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d 膷铆sel odd臎len媒ch 膷谩rkou"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Zde si pro va拧i zvukovou (%s) kartu m暖啪ete vybrat alternativn铆 ovlada膷 (bu膹 "
-"OSS nebo ALSA)"
+"Protokol rusers umo啪艌uje u啪ivatel暖m s铆t臎 zjistit kdo je p艡ihl谩拧en na\n"
+"jin茅m po膷铆ta膷i."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Nastaven铆 zvuku"
+msgid "Automatic Steps Configuration"
+msgstr "Nastaven铆 automatick媒ch krok暖"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Pro va拧i zvukovou kartu (%s), kter谩 nyn铆 pou啪铆v谩 ovlada膷 \"%s\", nen铆 啪谩dn媒 "
-"zn谩m媒 OSS/ALSA alternativn铆 ovlada膷."
+"Chcete v臎d臎t v铆ce o komunit臎 okolo Open Source? P艡ipojte se ke sv臎tu "
+"Svobodn茅ho Software!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Bez alternativn铆ho ovlada膷e"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "Zapnout podporu r谩dia"
+msgid "Please select data to backup..."
+msgstr "Zkontrolujte pros铆m data pro z谩lohov谩n铆..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Podpora r谩dia :"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"P艡ipojen铆 selhalo.\n"
+"Ov臎艡te nastaven铆 v ovl谩dac铆m centru Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "Nastaven铆 PLL :"
+msgid "received"
+msgstr "p艡ijato"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Po膷et buffer暖 pro zachycen铆 syst茅mem mmap"
+msgid "/File/_New"
+msgstr "/Soubor/_Nov媒"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Po膷et buffer暖 pro zachycen铆 :"
+msgid "The DNS Server IP"
+msgstr "IP adresa DNS serveru"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Typ tuneru :"
+msgid "IP Range End:"
+msgstr "IP rozsah do:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Model karty :"
+msgid "High"
+msgstr "Vy拧拧铆"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Modul bttv j谩dra opera膷n铆ho syst茅mu GNU/Linux nalezne spr谩vn茅 parametry "
-"automaticky pro v臎t拧inu modern铆ch TV karet.\n"
-"Je-li va拧e karta 拧patn臎 detekov谩na, lze nastavit spr谩vn媒 typ karty a tuneru "
-"ru膷n臎 zde. Pokud je to pot艡eba, vyberte tak茅 parametry va拧铆 TV karty."
+msgid "NoVideo"
+msgstr "Bez Videa"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Toto pole popisuje za艡铆zen铆"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Nezn谩m谩|Obecn谩"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "P艡id谩v谩m tisk谩rnu do Star Office/OpenOffice.org/GIMP"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Nezn谩m谩|CPH06X (bt878) [v铆ce dodavatel暖]"
+msgid "Local Printers"
+msgstr "M铆stn铆 tisk谩rny"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Nezn谩m谩|CPH05X (bt878) [v铆ce dodavatel暖]"
+msgid "Installation image directory"
+msgstr "Adres谩艡 s obrazem instalace"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Autodetekce"
+msgid "NIS Server"
+msgstr "NIS Server"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Prov茅st"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va拧e volba? (v媒choz铆 %s) "
+msgid "Spain"
+msgstr "艩pan臎lsko"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "艩patn谩 volba, zkuste to znovu\n"
+msgid "This user name has already been added"
+msgstr "Toto u啪ivatelsk茅 jm茅no u啪 bylo p艡id谩no"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Znovu odeslat"
+msgid "Choose a file"
+msgstr "Vyberte soubor"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Oznamuji zm臎nu n谩v臎拧t铆:\n"
-"%s"
+msgid "Apply"
+msgstr "Pou啪铆t"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vyberte si pros铆m prvn铆 膷铆slo z v媒b臎ru, kter茅 chcete editovat,\n"
-"nebo stiskn臎te Enter pro pokra膷ov谩n铆.\n"
-"Va拧e volba? "
+msgid "Auto-detect available ports"
+msgstr "Automaticky detekovat dostupn茅 porty"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Je zde v铆ce voleb, ze kter媒ch je mo啪n茅 si vybrat (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je vypnuto"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va拧e volba? (v媒choz铆 '%s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " zadejte `void` pokud chcete pr谩zdn媒 vstup"
+msgid "Belgium"
+msgstr "Belgie"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Chcete klepnout na toto tla膷铆tko? "
+msgid "Kuwait"
+msgstr "Kuvajt"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Tla膷铆tko '%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "Vyberte si, kter媒 spr谩vce oken m谩 b媒t spou拧t臎n:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Specifick谩 t艡铆da cpu"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va拧e volba? (0/1, v媒choz铆 '%s') "
+msgid "First Time Wizard"
+msgstr "Pr暖vodce pro nov茅 u啪ivatele"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Polo啪ky, kter茅 je pot艡eba vyplnit:\n"
-"%s"
+"Stala se chyba, ale nev铆m, jak j铆 spr谩vn臎 interpretovat.\n"
+"Pokra膷ujte na vlastn铆 riziko."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spu拧t臎n铆 modulu %s selhalo.\n"
-"Chcete to zkusit s jin媒mi parametry?"
+msgid "please wait, parsing file: %s"
+msgstr "膷ekejte pros铆m, zpracov谩v谩m soubor: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Zadejte mo啪nosti"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automatick茅 prozkoum谩n铆"
+msgid "Pakistan"
+msgstr "P谩kist谩n"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"V n臎kter媒ch p艡铆padech pot艡ebuje ovlada膷 %s pro svoji spr谩vnou funkci dal拧铆\n"
-"informace, p艡esto啪e norm谩ln臎 funguje i bez nich. Cht臎li byste zadat\n"
-"n臎jak茅 dopl艌uj铆c铆 mo啪nosti, nebo rad臎ji nech谩te ovlada膷 samostatn臎 "
-"prozkoumat\n"
-"hardware va拧eho po膷铆ta膷e, aby z铆skal informace kter茅 pot艡ebuje? Zkoum谩n铆\n"
-"hardware m暖啪e ve v媒jime膷n媒ch p艡铆padech zp暖sobit zamrznut铆 po膷铆ta膷e, ale "
-"nem臎lo\n"
-"by v 啪谩dn茅m p艡铆pad臎 zp暖sobit jin茅 拧kody."
+"Aby bylo mo啪n茅 p艡i tomto nastaven铆 tisknout na inkoustov媒ch tisk谩rn谩ch od "
+"firmy Lexmark, je pot艡eba m铆t tiskov媒 ovlada膷 poskytovan媒 spole膷nost铆 "
+"Lexmark (http://www.lexmark.com/). Klepn臎te na odkaz \"Drivers\", vyberte "
+"v谩拧 model tisk谩rny, a pot茅 zvolte Linux jako opera膷n铆 syst茅m. Ovlada膷e jsou "
+"v RPM bal铆膷c铆ch nebo skripty shellu s interaktivn铆 grafickou instalac铆. Tu "
+"ale k nastaven铆 va拧eho syst茅mu nepot艡ebujete. Ukon膷ete instala膷n铆 program "
+"ihned po odsouhlasen铆 licence. Pak m暖啪ete vytisknout str谩nku s nastaven铆m "
+"tiskov媒ch hlav programem \"lexmarkmaintain\" a nastavit zarovn谩n铆 tiskov茅 "
+"hlavy pomoc铆 tohoto programu."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kter媒 %s ovlada膷 m谩m zkusit?"
+msgid "Permissions"
+msgstr "Opr谩vn臎n铆"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Volby modulu:"
+msgid "Provider name (ex provider.net)"
+msgstr "Jm茅no poskytovatele (nap艡. provider.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nyn铆 m暖啪ete poskytnout modulu %s dal拧铆 parametry.\n"
-"Volby se zad谩vaj铆 ve tvaru ''n谩zev=hodnota n谩zev2=hodnota2 ...''.\n"
-"Nap艡铆klad, ''io=0x300 irq=7''"
+msgid "Version: %s\n"
+msgstr "Verze: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Nyn铆 lze zadat volby pro modul %s.\n"
-"Pozn.: ka啪d谩 adresa by m臎la b媒t ve tvaru 0x nap艡. '0x123'"
+"V谩拧 syst茅m m谩 m谩lo syst茅mov媒ch prost艡edk暖. P艡i instalaci Mandrake Linuxu se\n"
+"m暖啪ete setkat s r暖zn媒mi probl茅my. Pokud se tak stane, zkuste textovou\n"
+"verzi instala膷n铆ho programu. Ta se spou拧t铆 tak, 啪e p艡i startu\n"
+"z CD mechaniky stisknete 'F1' a pot茅 nap铆拧ete 'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Pou啪铆t Windows odd铆l jako loopback"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovlada膷 pro %s kartu %s"
+msgid "Armenian (typewriter)"
+msgstr "Arm茅nsk茅 (psac铆 stroj)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Uk谩zat informace o hardware"
+msgid "Connection type: "
+msgstr "Typ p艡ipojen铆:"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "M谩te n臎jak茅 %s rozhran铆?"
+msgid "Graphical interface"
+msgstr "Grafick茅 rozhran铆"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "M谩te je拧t臎 n臎jak茅 jin茅?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s s hardwarovou 3D akcelerac铆"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na拧el jsem %s %s rozhran铆"
+msgid "India"
+msgstr "Indie"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Zde m暖啪ete nastavit ka啪d媒 z parametr暖 modulu."
+msgid "Chad"
+msgstr "膶ad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "膷谩rkou odd臎len茅 znakov茅 艡et臎zce"
+msgid "Slovakia"
+msgstr "Slovensko"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "膷谩rkou odd臎len谩 膷铆sla"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d znakov媒ch 艡et臎zc暖 odd臎len媒ch 膷谩rkou"
+msgid "Cambodia"
+msgstr "Kambod啪a"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d 膷铆sel odd臎len媒ch 膷谩rkou"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Horizont谩ln铆 frekvence monitoru: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "膷铆slo"
+msgid "Path"
+msgstr "Cesta"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Pot艡ebujete mikrok贸d pro Alcatel.\n"
-"St谩hn臎te jej z\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"a zkop铆rujte soubor mgmt.o do /usr/share/speedtouch"
+"Zde m暖啪ete zadat libovoln媒 p艡铆kaz, do kter茅ho bude pos铆l谩m v媒stup z tiskov茅 "
+"煤lohy m铆sto p艡铆m茅ho odesl谩n铆 na tisk谩rnu."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Nejb臎啪n臎ji se pro p艡ipojen铆 pomoc铆 ADSL pou啪铆v谩 pppoe.\n"
-"N臎kter谩 p艡ipojen铆 pou啪铆vaj铆 pptp, n臎kter谩 pouze dhcp. Jestli si nejste "
-"jist铆, zvolte 'pou啪铆t pppoe'"
+"Tiskov媒 syst茅m (%s) nebude automaticky spu拧t臎n p艡i startu po膷铆ta膷e.\n"
+"\n"
+"Je mo啪n茅, 啪e volba automatick茅ho startu byla vypnuta ve vy拧拧铆 bezpe膷nostn铆 "
+"煤rovni, proto啪e tiskov媒 syst茅m je potenci谩ln铆 nebezpe膷铆 pro s铆钮ov媒 煤tok.\n"
+"\n"
+"Chcete nastavit zp臎t automatick媒 start tiskov茅ho syst茅mu?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "P艡ipojen铆 k Internetu"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Tisk谩rna %s\n"
+"Co chcete zm臎nit na t茅to tisk谩rn臎?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (pomoc铆 pppoa) usb"
+msgid "Add host"
+msgstr "P艡idat po膷铆ta膷"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Pokud skute膷n臎 v铆te, kter媒 ovlada膷 je ten spr谩vn媒 pro va拧i kartu,\n"
+"m暖啪ete ho vybrat se seznamu.\n"
+"\n"
+"Aktu谩ln铆 ovlada膷 pro va拧i zvukovou kartu \"%s\" je \"%s\"."
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "pou啪铆t dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Chcete povolit u啪ivatel暖m, aby si mohli sd铆let adres谩艡e ve sv茅m domovsk茅m "
+"adres谩艡i?\n"
+"Pokud to povol铆te, u啪ivatel暖m sta膷铆 pouze klepnout na \"Sd铆let\" v "
+"aplikac铆ch Konqueror a Nautilus.\n"
+"\n"
+"Lze tak茅 prov茅st \"Vlastn铆\" povolen铆 pro jednotliv茅 u啪ivatele.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "pou啪铆t pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Vyberte si, zda chcete ulo啪it nebo nahr谩t v媒b臎r bal铆膷k暖 na disketu.\n"
+"Form谩t v媒b臎ru je stejn媒 jako form谩t automaticky generovan茅 diskety."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "pou啪铆t pppoe"
+msgid "China (broadcast)"
+msgstr "膶铆na (broadcast)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Dal拧铆 porty"
+msgid "Use quota for backup files."
+msgstr "Pou啪铆t kv贸ty pro z谩lo啪n铆 soubory."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "V拧echno (bez firewallu)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Nastavuji tisk谩rnu \"%s\"..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Zad谩n 拧patn媒 port: %s.\n"
-"Spr谩vn媒 form谩t je \"port/tcp\" nebo \"port/udp\", \n"
-"kde 膷铆slo portu je mezi 1 a 65535."
+msgid "Internet connection"
+msgstr "Internetov茅 p艡ipojen铆"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Zadali jste nespr谩vn媒 port.\n"
-"Spr谩vn臎 je nap艡铆klad: 139/tcp 139/udp.\n"
-"V铆ce se dozv铆te ze souboru /etc/services."
+"Spu拧t臎n铆 modulu %s selhalo.\n"
+"Chcete to zkusit s jin媒mi parametry?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Kter茅 slu啪by p艡铆stupn茅 z Internetu chcete povolit?"
+msgid "Welcome to the Open Source world."
+msgstr "V铆tejte do sv臎ta Open Source"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Nastaven铆 aplikace drakfirewall\n"
-"\n"
-"P艡edt铆m, ne啪 budete pokra膷ovat, se ujist臎te, 啪e jste nastavili va拧i\n"
-"s铆钮 a p艡铆stup k Internetu pomoc铆 aplikace drakconnect."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosna a Hercegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"Nastaven铆 aplikace drakfirewall\n"
-"\n"
-"Zde je mo啪n茅 nastavit osobn铆 firewall pro tento syst茅m Mandrake Linux.\n"
-"Pro v媒konn茅 艡e拧en铆 vyhrazen茅ho firewallu pou啪ijte specializovanou\n"
-"distribuci MandrakeSecurity Firewall."
+"Pro tento p艡铆pojn媒 bod pot艡ebujete opravdov媒 souborov媒 syst茅m (ext2/ext3, "
+"ReiserFS, XFS nebo JFS)\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "沤谩dn谩 s铆钮ov谩 karta"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Mus铆te zadat n谩zev po膷铆ta膷e nebo IP adresu.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP a IMAP server"
+msgid "Netherlands"
+msgstr "Nizozem铆"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Pos铆l谩m soubory..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Po拧tovn铆 server"
+msgid "Internal ISDN card"
+msgstr "Intern铆 ISDN karta"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Dom茅nov媒 server"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Pro va拧i zvukovou kartu (%s), kter谩 nyn铆 pou啪铆v谩 ovlada膷 \"%s\", nen铆 啪谩dn媒 "
+"zn谩m媒 OSS/ALSA alternativn铆 ovlada膷."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Webov媒 server"
+msgid "Title"
+msgstr "N谩zev"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "N谩zev po膷铆ta膷e pro Zeroconf nem暖啪e obsahovat \"te膷ku\""
+msgid "Install & convert Fonts"
+msgstr "Instalovat & konvertovat fonty"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "N谩zev po膷铆ta膷e"
+msgid "WARNING"
+msgstr "VAROV脕N脥"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "N谩zev po膷铆ta膷e pro Zeroconf"
+msgid "Installing bootloader"
+msgstr "Instaluji zav谩d臎c铆 program"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Pokud nechcete pou啪铆t v媒choz铆 zvolen媒 n谩zev,\n"
-"zadejte n谩zev po膷铆ta膷e pro Zeroconf bez te膷ek."
+msgid "replay"
+msgstr "zopakovat"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Nastavuji s铆钮"
+msgid "detected %s"
+msgstr "detekov谩no %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Vyberte si pros铆m, kter媒 s铆钮ov媒 adapt茅r chcete pou啪铆t pro p艡ipojen铆 k "
-"internetu"
+msgid "Virgin Islands (U.S.)"
+msgstr "Panensk茅 ostrovy (U.S.)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Zvolte s铆钮ov茅 rozhran铆"
+msgid "Bad backup file"
+msgstr "艩patn媒 z谩lo啪n铆 soubor"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Ve va拧em po膷铆ta膷i nebyl nalezen 啪谩dn媒 s铆钮ov媒 adapt茅r.\n"
-"Nemohu nastavit typ spojen铆."
+"Internetov茅 sd铆len铆 u啪 bylo nastaveno.\n"
+"Nyn铆 je vypnuto.\n"
+"\n"
+"Co chcete d谩le d臎lat?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Kter茅ho dhcp klienta chcete pou啪铆t?\n"
-"Standardn铆 je dhcp-client"
+"Zadejte IP adresu a port po膷铆ta膷e, ze kter茅ho budete cht铆t vyu啪铆vat tisk谩rny."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nena拧el jsem 啪谩dnou ISDN PCI kartu. Pros铆m zvolte si jednu z n谩sleduj铆c铆 "
-"nab铆dky"
+msgid "Pipe into command"
+msgstr "Poslat do p艡铆kazu"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Na拧el jsem ISDN PCI kartu, jej铆啪 typ ale nezn谩m. Pros铆m zvolte si jednu z "
-"n谩sleduj铆c铆ho seznamu PCI karet."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kterou z t臎chto ISDN karet m谩te?"
+"N臎kter谩 膷谩st va拧eho hardware pot艡ebuje 'speci谩ln铆' ovlada膷e, aby mohla "
+"pracovat.\n"
+"Dal拧铆 informace m暖啪ete nal茅zt na: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Nastaven铆 ISDN"
+msgid "Detecting devices..."
+msgstr "Detekuji za艡铆zen铆..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "P艡eru拧it"
+msgid "Click here to launch the wizard ->"
+msgstr "Klepn臎te pro spu拧t臎n铆 pr暖vodce ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Pokra膷ovat"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Popis pol铆:\n"
"\n"
-"Jestli m谩te ISA kartu, m臎ly by b媒t hodnoty na n谩sleduj铆c铆 obrazovce "
-"spr谩vn茅.\n"
-"\n"
-"Jestli m谩te PCMCIA kartu, mus铆te zn谩t jej铆 IRQ a IO.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Nev铆m"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "n谩zev CPU"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Ob膷erstvuji tiskov谩 data ...."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Jak媒 typ karty m谩te?"
+msgid "You must also format %s"
+msgstr "Mus铆te tak茅 naform谩tovat %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Chcete pou啪铆t nalezen茅 rozhran铆 \"%s\" ?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Bu膹te opatrn铆: tato akce je nebezpe膷n谩."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Kter媒 protokol chcete pou啪铆t?"
+msgid "Insert a floppy containing package selection"
+msgstr "Vlo啪te disketu obsahuj铆c铆 v媒b臎r bal铆膷k暖"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pou啪it媒 ve zbytku sv臎ta"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol pou啪it媒 ve zbytku sv臎ta \n"
-" 啪谩dn媒 D-kan谩l (leased lines)"
+msgid "Security Alerts:"
+msgstr "Bezpe膷nostn铆 varov谩n铆:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Evropsk媒 protokol"
+msgid "Sweden"
+msgstr "艩v茅dsko"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Evropsk媒 protokol (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Pou啪铆t Expect pro SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Vyberte si sv茅ho poskytovatele internetu.\n"
-" Pokud nen铆 na seznamu, vyberte si Jin媒"
+msgid "Poland"
+msgstr "Polsko"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Extern铆 ISDN modem"
+msgid "Importance: %s\n"
+msgstr "D暖le啪itost: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Intern铆 ISDN karta"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"Pokud chcete po z谩lohov谩n铆 p谩sku automaticky vysunout, pros铆m zatrhn臎te."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Jak茅 je va拧e ISDN p艡ipojen铆?"
+msgid "Other ports"
+msgstr "Dal拧铆 porty"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Pr暖vodce nastaven铆m s铆t臎"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Po膷et buffer暖 pro zachycen铆 syst茅mem mmap"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Star谩 konfigurace (isdn4net)"
+msgid "SMBus controllers"
+msgstr "SMBus kontrol茅r"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nov谩 konfigurace (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Prodleva p艡ipojen铆 (vte艡iny)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Kterou ISDN konfiguraci preferujete?\n"
-"\n"
-"* Starou, pou啪itou pro isd4net. Ta obsahuje v媒konn茅 n谩stroje,\n"
-" ale je choulostiv谩 na konfiguraci a nen铆 standardn铆.\n"
-"\n"
-"* Novou konfiguraci, snaz拧铆 pro porozum臎n铆, v铆ce standardn铆,\n"
-" ale s m茅n臎 n谩stroji.\n"
-"\n"
-"Doporu膷ujeme vybrat si snaz拧铆 novou konfiguraci.\n"
+"N臎kter茅 prvn铆 modely 膷ipset暖 i486DX100 neprov谩d臎ly spr谩vn臎 po instrukci "
+"\"halt\" n谩vrat do opera膷n铆ho re啪imu"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Ned臎lat nic"
+msgid "Croatian"
+msgstr "Chorvatsk茅"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Pou啪铆t existuj铆c铆 odd铆l"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Instalovat rpm"
+msgid "Unable to contact mirror %s"
+msgstr "Nelze kontaktovat zrcadlo %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"byl detekov谩n win modem zalo啪en媒 na \"%s\", chcete nainstalovat pot艡ebn媒 "
-"software ?"
+msgid "/Help/_About..."
+msgstr "/N谩pov臎da/_O aplikaci..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Title"
-msgstr "N谩zev"
+msgid "Remove user directories before restore."
+msgstr "Odebrat adres谩艡e u啪ivatele p艡ed obnovou."
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"V谩拧 modem nen铆 syst茅mem podporov谩n.\n"
-"Pod铆vejte se na str谩nky http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Druh媒 DNS Server (nepovinn媒)"
+"Nyn铆 za膷ne konfigurace vzd谩len茅 tisk谩rny. To vy啪aduje funk膷n铆 s铆钮ov茅 "
+"spojen铆, ale s铆钮 nen铆 zat铆m nastavena. Pokud budete pokra膷ovat bez nastaven铆 "
+"s铆t臎, nebude mo啪n茅 pou啪铆t tisk谩rnu, kterou po啪adujete. Jak chcete pokra膷ovat?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Prvn铆 DNS Server (nepovinn媒)"
+msgid "CUPS printer configuration"
+msgstr "Nastaven铆 tisk谩ren p艡es CUPS"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Jm茅no dom茅ny"
+msgid "could not find any font in your mounted partitions"
+msgstr "nelze nal茅zt 啪谩dn茅 fonty v p艡ipojen茅m odd铆le"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "F00f chyba"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Podle sc茅n谩艡e"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Pomoc铆 termin谩lu"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Kter茅ho dhcp klienta chcete pou啪铆t?\n"
+"Standardn铆 je dhcp-client"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "N谩zev dom茅ny:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "P艡ihla拧ovac铆 jm茅no"
+msgid "On Floppy"
+msgstr "Na disketu"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonn铆 膷铆slo"
+msgid "Restore"
+msgstr "Obnovit"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "N谩zev p艡ipojen铆"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"pokud je nastaveno, kontroluje, zda je s铆钮ov茅 rozhran铆 v promiskuitn铆m re啪imu"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Mo啪nosti vyt谩膷en铆"
+msgid "Looking for available packages..."
+msgstr "Hled谩m dostupn茅 bal铆膷ky"
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kter茅mu s茅riov茅mu portu je v谩拧 modem p艡ipojen?"
+msgid "Init Message"
+msgstr "脷vodn铆 zpr谩va"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Nastaven铆 s铆t臎"
+msgid "Rescue partition table"
+msgstr "Z谩chrana tabulky odd铆l暖"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Vyskytl se probl茅m b臎hem konfigurace.\n"
-"Otestujte p艡ipojen铆 k Internetu pomoc铆 net_monitor nebo mcc. Pokud nen铆 "
-"spojen铆 funk膷n铆, bude pot艡eba asi znovu na膷铆st konfiguraci"
+msgid "Connection complete."
+msgstr "P艡ipojen铆 ukon膷eno."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Doporu膷ujeme po tomto kroku restartovat X Window,\n"
-"aby se p艡ede拧lo probl茅m暖m se zm臎nou n谩zvu po膷铆ta膷e."
+msgid "Cyprus"
+msgstr "Kypr"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme, konfigurace s铆t臎 a internetu je ukon膷ena.\n"
-"\n"
-"Konfigurace bude nyn铆 aktivov谩na.\n"
+msgid "Remove from RAID"
+msgstr "Odebrat z RAIDu"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Vyskytl se probl茅m p艡i restartu s铆t臎: \n"
-"\n"
-"%s"
+"Tento 拧ifrovac铆 kl铆膷 je p艡铆li拧 jednoduch媒 (mus铆 b媒t alespo艌 %d znak暖 dlouh媒)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Je pot艡eba restartovat s铆钮. Chcete prov茅st restart ?"
+msgid "Configuration Wizards"
+msgstr "Pr暖vodci nastaven铆m"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Nastaven铆 s铆t臎"
+msgid "ISDN connection"
+msgstr "ISDN p艡ipojen铆"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky p艡ipojovat po startu po膷铆ta膷e?"
+msgid "primary"
+msgstr "prim谩rn铆"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internetov茅 p艡ipojen铆"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " na serveru SMB/Windows \"%s\", sd铆len谩 jako \"%s\""
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"M谩te nastaveno v铆ce zp暖sob暖, jak se p艡ipojit k Internetu.\n"
-"Vyberte si jeden, kter媒 chcete pou啪铆t.\n"
+"Nyn铆 si zvolte, kter茅 slu啪by maj铆 b媒t spu拧t臎ny p艡i startu po膷铆ta膷e.\n"
+"\n"
+"Je zde seznam v拧ech slu啪eb, kter茅 jsou aktu谩ln臎 nainstalov谩ny.\n"
+"Prohl茅dn臎te si seznam pozorn臎 a zru拧te ty, kter茅 nepot艡ebujete spou拧t臎t p艡i\n"
+"startu po膷铆ta膷e.\n"
"\n"
+"Pokud p艡ejedete my拧铆 nad n臎kterou polo啪kou, objev铆 se mal谩 n谩pov臎da\n"
+"s popisem, co dan谩 slu啪ba d臎l谩. Pokud p艡esn臎 nev铆te, zda je slu啪ba u啪ite膷n谩\n"
+"nebo ne, je lep拧铆 ji nechat ve v媒choz铆m stavu.\n"
+"\n"
+"!! Rozva啪te, co za slu啪by spustit, zvl谩拧t臎 pokud budete po膷铆ta膷 provozovat\n"
+"jako server: nepot艡ebujete v拧echny slu啪by. Pamatujte, 啪e 膷铆m v铆ce slu啪eb\n"
+"je spu拧t臎no, t铆m je v臎t拧铆 nebezpe膷铆 ne啪谩douc铆ho proniknut铆 do po膷铆ta膷e.\n"
+"Tak啪e povolte opravdu jen ty slu啪by, kter茅 nezbytn臎 pot艡ebujete.\n"
+"!!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si p艡ipojen铆, kter茅 chcete nastavit"
+msgid "Skip"
+msgstr "P艡esko膷it"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "detekovan谩(茅) s铆钮ov谩(茅) karta(y)"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "P艡ipojen铆 k LAN"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktivuje 膷i deaktivuje v拧echny s铆钮ov谩 rozhran铆, kter谩 maj铆 nastartovat p艡i\n"
+"startu syst茅mu."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "detekov谩no kabelov茅 p艡ipojen铆"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"Frekvence CPU v MHz (Megahertz je hodnota p艡ibli啪n臎 rovna vypo膷ten茅mu po膷tu "
+"instrukc铆, kter茅 je schopen procesor prov茅st za sekundu)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabelov茅 p艡ipojen铆"
+msgid "important"
+msgstr "d暖le啪it茅"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "detekov谩no"
+msgid "Total Progress"
+msgstr "Celkov媒 pr暖b臎h"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL p艡ipojen铆"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"Aplikace DrakX se nejd艡铆ve pokus铆 naj铆t v拧echny pevn茅 disky v po膷铆ta膷i.\n"
+"Tak茅 se pokus铆 nal茅zt jeden nebo v铆ce PCI SCSI adapt茅r暖. Pokud n臎jak媒 "
+"najde,\n"
+"automaticky nainstaluje spr谩vn媒 ovlada膷.\n"
+"\n"
+"Proto啪e automatick谩 detekce hardware nemus铆 v啪dy nal茅zt v拧echny typy "
+"hardware,\n"
+"budete v dialogu dot谩z谩ni, zda v暖bec m谩te n臎jak媒 SCSI adapt茅r. \n"
+"Pokud si budete muset vybrat ovlada膷 ru膷n臎, aplikace DrakX se zept谩,\n"
+"zda pro n臎j chcete zadat n臎jak茅 volby M臎li byste povolit aplikaci DrakX,\n"
+"a钮 se pokus铆 zjistit, kter茅 volby jsou pro danou kartu pot艡eba. V臎t拧inou to\n"
+"funguje dob艡e.\n"
+"\n"
+"Pokud to nebude fungovat, budete muset zadat dal拧铆 informace pro ovlada膷 "
+"ru膷n臎."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "detekov谩no %s"
+msgid "Users"
+msgstr "U啪ivatel茅"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN p艡ipojen铆"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "P艡ipojen铆 p艡es winmodem"
+msgid "Preparing bootloader..."
+msgstr "P艡ipravuji zav谩d臎c铆 program"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detekov谩no na portu %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Br谩na (nap艡. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Modemov茅 p艡ipojen铆"
+msgid "The passwords do not match"
+msgstr "Hesla nejsou shodn谩"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detekuji za艡铆zen铆..."
+msgid "Examples for correct IPs:\n"
+msgstr "P艡铆klady spr谩vn媒ch IP adres:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Expertn铆 re啪im"
+msgid "Frequency (MHz)"
+msgstr "Frekvence (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Pou啪铆t autodetekci"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Pokud chcete pou啪铆t ulo啪en媒 v媒b臎r bal铆膷k暖, spus钮te instalaci takto: 'linux "
+"defcfg=floppy'"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Zvolte profil pro nastaven铆"
+msgid "the number of the processor"
+msgstr "膷铆slo procesoru"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"V铆t谩 v谩s pr暖vodce p艡ipojen铆m k s铆ti\n"
-"\n"
-"Nyn铆 lze nastavit p艡ipojen铆 k s铆ti nebo internetu.\n"
-"Pokud nechcete pou啪铆t automatickou detekci, odzna膷te pol铆膷ko.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Hardwarov茅 hodiny nastaveny na GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Proto啪e prov谩d铆te instalaci po s铆ti, je ji啪 s铆钮 nastavena.\n"
-"Klepn臎te na Ok pro zachov谩n铆 nastaven铆 nebo klepn臎te na Zru拧it pro nov茅 "
-"nastaven铆 p艡ipojen铆 Internetu a k s铆ti.\n"
+msgid "Give a file name"
+msgstr "Zadejte n谩zev souboru"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nyn铆 se bude konfigurovat p艡ipojen铆 %s.\n"
-"\n"
-"\n"
-"Stiskn臎te OK pro pokra膷ov谩n铆."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Vyberte port, ke kter茅mu je va拧e tisk谩rna p艡ipojena."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nyn铆 se p艡ipravuje konfigurace %s p艡ipojen铆."
+msgid "Change Cd-Rom"
+msgstr "Vym臎nit CD-ROM"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Nastaven铆 a p艡ipojen铆 k internetu"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Pou啪铆t p艡铆r暖stkovou z谩lohu (nep艡episovat star拧铆 z谩lohy)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Nastavit p艡ipojen铆"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Pro va拧i zvukovou kartu (%s) nen铆 啪谩dn媒 zn谩m媒 ovlada膷"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Odpojit"
+msgid "force"
+msgstr "vnutit"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "P艡ipojit"
+msgid "Exit"
+msgstr "Konec"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"M暖啪ete p艡ekonfigurovat p艡ipojen铆."
+"POZN脕MKA: V z谩vislosti na modelu tisk谩rny a tiskov茅m syst茅mu je pot艡eba "
+"nainstalovat dal拧铆ch %d MB pot艡ebn茅ho software."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Nem暖啪ete se p艡ipojit k Internetu nebo p艡ekonfigurovat p艡ipojen铆."
+"Nem谩te nakonfigurov谩no 啪谩dn茅 rozhran铆.\n"
+"Nastavte jej klepnut铆m na 'Konfigurovat'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "V sou膷asnosti nejste p艡ipojeni k Internetu."
+msgid "Estonian"
+msgstr "Estonsk茅"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"M暖啪ete se odpojit nebo p艡ekonfigurovat p艡ipojen铆."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache je WWW server. Je pou啪铆v谩n k poskytov谩n铆 HTML a CGI soubor暖."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "V sou膷asnosti jste p艡ipojeni k Internetu"
+msgid "Add/Del Clients"
+msgstr "P艡idat/Odebrat klienty"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL by m臎lo za膷铆nat znaky 'ftp:' nebo 'http:'"
+msgid "Choose the network interface"
+msgstr "Zvolte s铆钮ov茅 rozhran铆"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy by m臎la b媒t http://..."
+msgid "Unknown Model"
+msgstr "Nezn谩m媒 model"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "CD/DVD burners"
+msgstr "CD/DVD vypalova膷ky"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Standardn铆 startovac铆 odd铆l\n"
+" (Pro MS-DOS, ne pro LILO)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Nastaven铆 proxy"
+msgid "choose image"
+msgstr "vyberte obraz"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Adresa br谩ny by m臎la b媒t ve tvaru 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "Na拧el jsem existuj铆c铆 nastaven铆 firewallu!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresa serveru DNS by m臎la b媒t ve tvaru 1.2.3.4"
+msgid "Connection name"
+msgstr "N谩zev p艡ipojen铆"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Za艡铆zen铆 br谩ny (gateway)"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"hodnota pro x sou艡adnici\n"
+"pro textov媒 box v po膷tu znak暖"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Br谩na (nap艡. %s)"
+msgid "Updating package selection"
+msgstr "Aktualizuji v媒b臎r bal铆膷k暖"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS server"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Kam chcete p艡ipojit loopback soubor %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Pros铆m zadejte n谩zev va拧eho po膷铆ta膷e.\n"
-"Tento n谩zev mus铆 b媒t 煤pln媒, jako 'mybox.mylab.myco.com'.\n"
-"Pokud pou啪铆v谩te br谩nu(gateway), m暖啪ete tak茅 zadat jej铆 adresu"
+"Disketa byla s 煤sp臎chem vytvo艡ena.\n"
+"Nyn铆 lze prov茅st znovu instalaci."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Intenzita m谩 povolen茅 p艡铆pony k, M nebo G (nap艡. \"11M\" nebo 11M) nebo "
-"p艡idejte dostate膷n媒 po膷et '0' (nul)."
+msgid "the number of buttons the mouse has"
+msgstr "po膷et tla膷铆tek na my拧i"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Frekvence m谩 povolen茅 p艡铆pony k, M nebo G (nap艡铆klad \"2,46G\" pro frekvenci "
-"2,46 GHz) nebo p艡idejte dostatek '0' (nul)."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa mus铆 b媒t ve form谩tu 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Spustit p艡i startu"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "P艡i艡adit n谩zev po膷铆ta膷e ze z铆skan茅 DHCP adresy"
+"Pros铆m, zadejte adres谩艡 (nebo modul), do kter茅ho\n"
+" bude um铆st臎na z谩loha na tomto po膷铆ta膷i."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Rychl茅 p艡ipojen铆 do s铆t臎"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Sledovat id s铆钮ov茅 karty (u啪ite膷n茅 u notebook暖)"
+msgid "Replay"
+msgstr "Zopakovat"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "N谩zev po膷铆ta膷e z DHCP"
+msgid "Backup other files"
+msgstr "Z谩lohovat dal拧铆 soubory"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Maska s铆t臎"
+msgid "No floppy drive available"
+msgstr "Nen铆 dostupn谩 啪谩dn谩 disketov谩 mechanika"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "IP adresa"
+msgid "Backup files are corrupted"
+msgstr "Z谩lo啪n铆 soubory jsou po拧kozen茅"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Norma TV:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatick谩 IP"
+msgid "Cpuid family"
+msgstr "Rodina CPU"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (ovlada膷 %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavuji s铆钮ov茅 za艡铆zen铆 %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litevsk茅 AZERTY (nov谩)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Pros铆m zadejte IP nastaven铆 pro tento po膷铆ta膷.\n"
-"Ka啪d谩 polo啪ka mus铆 b媒t zad谩na jako IP adresa v 'desetinn茅' form臎\n"
-"(nap艡铆klad 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "ano znamen谩, 啪e aritmetick媒 koprocesor je vybaven vektorem v媒jimek"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"VAROV脕N脥: Toto za艡铆zen铆 ji啪 bylo nastaveno pro p艡ipojen铆 k Internetu.\n"
-"Klepn臎te na Ok pro zachov谩n铆 nastaven铆.\n"
-"Modifikace n谩sleduj铆c铆ch polo啪ek p艡ep铆拧e toto nastaven铆."
+"Zvolili jste softwarov媒 RAID odd铆l jako ko艡enov媒 odd铆l (/).\n"
+"S t铆m se nen铆 schopn媒 vypo艡谩dat 啪谩dn媒 zav谩d臎c铆 program bez pou啪it铆 odd铆lu\n"
+"/boot. Ujist臎te se pros铆m, 啪e jste tento odd铆l p艡idali"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Varov谩n铆! Bylo nalezeno existuj铆c铆 nastaven铆 firewallu. Po instalaci m暖啪e "
-"b媒t zapot艡eb铆 n臎jak谩 ru膷n铆 煤prava."
+msgid "Previous"
+msgstr "P艡edchoz铆"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Na拧el jsem existuj铆c铆 nastaven铆 firewallu!"
+msgid "Other OS (MacOS...)"
+msgstr "Jin媒 syst茅m (MacOs...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Heslo va拧eho 煤膷tu"
+msgid "To activate the mouse,"
+msgstr "Vyzkou拧ejte na my拧i,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "V谩拧 煤膷et (u啪ivatelsk茅 jm茅no)"
+msgid "Bringing up the network"
+msgstr "Startuji s铆钮"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva p艡ipojen铆 (vte艡iny)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Sejmut茅 obrazovky budou dostupn茅 po instalaci v adres谩艡i %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Rychlost p艡ipojen铆"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Instala膷n铆 program nalezl na disku v铆ce ne啪 jeden odd铆l s Microsoft "
+"Windows.\n"
+"Pros铆m vyberte si jeden z nich, kter媒 je pot艡eba zmen拧it pro novu instalaci\n"
+"syst茅mu Mandrake Linux.\n"
+"\n"
+"Ka啪d媒 odd铆l je zobrazen n谩sledovn臎: \"Jm茅no pro Linux\",\n"
+"\"Jm茅no pro Windows\", \"Velikost\".\n"
+"\n"
+"\"Jm茅no pro Linux\" je slo啪eno n谩sledovn臎: \"typ pevn茅ho disku\",\n"
+"\"膷铆slo disku\", \"膷铆slo odd铆lu\". (nap艡铆klad \"hda1\").\n"
+"\n"
+"Pokud m谩te IDE disky, pak je \"typ pevn茅ho disku\" \"hd\", pokud m谩te SCSI,\n"
+"ozna膷en铆 bude \"sd\".\n"
+"\n"
+"\"膶铆slo disku\" je v啪dy p铆smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
+"takto:\n"
+"\n"
+" * \"a\" znamen谩 \"master disk na prim谩rn铆m IDE 艡adi膷i\",\n"
+"\n"
+" * \"b\" znamen谩 \"slave disk na prim谩rn铆m IDE 艡adi膷i\",\n"
+"\n"
+" * \"c\" znamen谩 \"master disk na sekund谩rn铆m IDE 艡adi膷i\",\n"
+"\n"
+" * \"d\" znamen谩 \"slave disk na sekund谩rn铆m IDE 艡adi膷i\".\n"
+"\n"
+"Pro SCSI disky plat铆, 啪e \"a\" je \"nejmen拧铆 SCSI ID\", \"b\" je \"druh茅\n"
+"nejmen拧铆 SCSI ID\" atd.\n"
+"\n"
+"\"Jm茅no pro Windows\" je p铆smeno, kter茅 je pou啪ito ve Windows\n"
+"(prvn铆 odd铆l nebo disk m谩 p铆smeno \"C:\")."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Typ vyt谩膷en铆"
+msgid "Tanzania"
+msgstr "Tanzanie"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "V媒b臎r si zemi"
+msgid "Computing FAT filesystem bounds"
+msgstr "Po膷铆t谩m hranice souborov茅ho syst茅mu fat"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS poskytovatele 膷.2 (voliteln茅)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Zdroje pro z谩lohu:\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS poskytovatele 膷.1 (voliteln茅)"
+msgid "Content of the file"
+msgstr "Obsah souboru"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Telefonn铆 膷铆slo poskytovatele"
+msgid "Authentication LDAP"
+msgstr "Ov臎艡en铆 pomoc铆 LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Jm茅no poskytovatele (nap艡. provider.net)"
+msgid "Let me pick any driver"
+msgstr "Umo啪nit v媒b臎r ovlada膷e"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Va拧e osobn铆 telefonn铆 膷铆slo"
+msgid "Profile "
+msgstr "Profil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 karty"
+msgid "transmitted"
+msgstr "p艡eneseno"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 karty"
+msgid "Palestine"
+msgstr "Palestina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO karty"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
+msgid "%d comma separated strings"
+msgstr "%d znakov媒ch 艡et臎zc暖 odd臎len媒ch 膷谩rkou"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ karty"
+msgid "Here is the full list of keyboards available"
+msgstr "Zde je kompletn铆 seznam dostupn媒ch kl谩vesnic"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Pros铆m vypl艌te nebo zkontrolujte n谩sleduj铆c铆 煤daje"
+msgid "Theme name"
+msgstr "N谩zev t茅matu"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Nastaven铆 p艡ipojen铆"
+msgid "/_Help"
+msgstr "/_N谩pov臎da"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Nepoda艡ilo se p艡ipojit k Internetu.\n"
-"Pokuste se p艡ekonfigurovat dan茅 p艡ipojen铆."
+"Zde m暖啪ete nastavit, zda skenery, co jsou p艡ipojeny k tomuto po膷铆ta膷i, mohou "
+"b媒t vzd谩len臎 p艡铆stupn茅 a tak茅 p艡esn臎 z jak媒ch po膷铆ta膷暖."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Z bezpe膷nostn铆ch d暖vod暖 bude spojen铆 ukon膷eno."
+msgid "the width of the progress bar"
+msgstr "拧铆艡ka li拧ty s pr暖b臎hem"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Po膷铆ta膷 je nyn铆 p艡ipojen k internetu"
+msgid "Cook Islands"
+msgstr "Cookovy ostrovy"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Testuji p艡ipojen铆 k internetu..."
+msgid "Formatting partition %s"
+msgstr "Form谩tuji odd铆l %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyn铆 pokusit p艡ipojit k internetu?"
+msgid "Hostname required"
+msgstr "Vy啪adov谩n n谩zev po膷铆ta膷e"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internet configuration"
-msgstr "Nastaven铆 Internetu"
+msgid "Unselect fonts installed"
+msgstr "Odzna膷it instalovan茅 fonty"
-#: ../../partition_table/raw.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"N臎co 拧patn茅ho se stalo s pevn媒m diskem. \n"
-"Test na integritu dat selhal. \n"
-"To znamen谩, 啪e z谩pis na tento disk m暖啪e skon膷it nep艡edv铆dan臎 a po拧kodit data."
+msgid "Cancel"
+msgstr "Zru拧it"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " (Default)"
-msgstr " (V媒choz铆)"
+msgid "Searching for configured scanners ..."
+msgstr "Vyhled谩v谩m nastaven茅 skenery ...."
-#: ../../printer/cups.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na serveru CUPS \"%s\""
+msgid "Wheel"
+msgstr "S kole膷kem"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Vzd谩len茅 tisk谩rny"
+msgid "Videocard"
+msgstr "Grafick谩 karta"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tZ谩lohov谩n铆 pou啪铆v谩 tar a bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on this machine)"
-msgstr "(na tomto po膷铆ta膷i)"
+msgid "Remove Selected"
+msgstr "Odstranit vybran茅"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
+msgid "/Autodetect _modems"
+msgstr "/Automaticky detekovat _modemy"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tiskov媒 Syst茅m pro Unix"
+msgid "Remove printer"
+msgstr "Odebrat tisk谩rnu"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LprNG"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"VAROV脕N脥!\n"
+"\n"
+"DrakX nyn铆 mus铆 zmen拧it odd铆l s Windows. Bu膹te opatrn铆: tato operace je\n"
+"nebezpe膷n谩. Pokud jste tak ji啪 neu膷inili, m臎li byste nejprve ukon膷it "
+"instalaci,\n"
+"spustit scandisk ve Windows (pop艡铆pad臎 i defrag) a potom instalaci znovu "
+"spustit\n"
+"Tak茅 byste si m臎li data z谩lohovat. A啪 si budete jist铆, 啪e chcete pokra膷ovat\n"
+"stiskn臎te Ok."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LprNG - LPR Nov茅 generace"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Kter茅 slu啪by p艡铆stupn茅 z Internetu chcete povolit?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"V铆tejte v nastaven铆 elektronick茅 po拧ty.\n"
+"\n"
+"Zde lze nastavit syst茅m pos铆l谩n铆 varovn媒ch zpr谩v.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - D茅mon pro tisk谩rny"
+msgid "Other"
+msgstr "Dal拧铆"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Default"
+msgstr "V媒choz铆"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tisk bez ukl谩d谩n铆 do fronty"
+msgid "Button 2 Emulation"
+msgstr "Emulace 2 tla膷铆tka"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown Model"
-msgstr "Nezn谩m媒 model"
+msgid "type1inst building"
+msgstr "vytv谩艡铆m type1inst"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Nezn谩m媒 model"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid "choose image file"
+msgstr "vyberte soubor s obrazem"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Po膷铆ta膷 %s"
+msgid "X server"
+msgstr "X server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network %s"
-msgstr "S铆钮 %s"
+msgid "Domain Admin User Name"
+msgstr "U啪ivatelsk茅 jm茅no Spr谩vce dom茅ny"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Rozhran铆 \"%s\""
+msgid "There was an error while scanning for TV channels"
+msgstr "Nastala chyba p艡i zkoum谩n铆 TV kan谩l暖"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lok谩ln铆 s铆钮(臎)"
+msgid "US keyboard (international)"
+msgstr "US (mezin谩rodn铆)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "P艡铆m媒 tisk (bez ovlada膷e)"
+msgid "Not installed"
+msgstr "Nen铆 instalov谩no"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", pou啪铆v谩 p艡铆kaz %s"
+msgid "LAN connection"
+msgstr "P艡ipojen铆 k LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " na serveru Novell \"%s\", tisk谩rna \"%s\""
+msgid "/File/-"
+msgstr "/Soubor/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " na serveru SMB/Windows \"%s\", sd铆len谩 jako \"%s\""
+msgid "Italian"
+msgstr "Italsk茅"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP hostitel \"%s\", port %s"
+msgid "Basic"
+msgstr "Z谩kladn铆"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " na serveru LPD \"%s\", tisk谩rna \"%s\""
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright 漏2002 by MandrakeSoft \n"
+"\tStew Benedict <sbenedict\\@mandrakesoft.com>\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", p艡i tisku na %s"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", multifunk膷n铆 za艡铆zen铆"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunk膷n铆 za艡铆zen铆 na HP JetDirect"
+msgid "Card IO"
+msgstr "IO karty"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multifunk膷n铆 za艡铆zen铆 na USB"
+msgid "when checked, owner and group won't be changed"
+msgstr "pokud za拧krtnuto, vlastn铆k a skupina nebudou zm臎n臎ny"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", multifunk膷n铆 za艡铆zen铆 na paraleln铆m portu \\#%s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Tento speci谩ln铆 Boostrap\n"
+"odd铆l je pro spu拧t臎n铆\n"
+"dal拧铆ho syst茅mu.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB tisk谩rna"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Vyberte pros铆m, kter媒 z krok暖 instalace m谩 b媒t proveden automaticky stejn臎 "
+"jako instala膷n铆 program nebo bude ru膷n臎 zad谩n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB tisk谩rna \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Zde m暖啪ete rozhodnout o tom, zda vzd谩len臎 p艡铆stupn茅 skenery budou vyu啪iteln茅 "
+"i na tomto po膷铆ta膷i."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " na paraleln铆m portu \\#%s"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-S铆t铆 p艡es FTP.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "M铆stn铆 tisk谩rny"
+msgid "Russian (Yawerty)"
+msgstr "Rusk茅 (Yawerty)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou 煤lohu do p艡铆kazu"
+msgid "You must enter a device or file name!"
+msgstr "Mus铆te zadat za艡铆zen铆 nebo n谩zev souboru!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskov茅ho za艡铆zen铆"
+msgid "/_Quit"
+msgstr "/_Konec"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Tisk谩rna na Netware serveru"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Pot艡ebujete mikrok贸d pro Alcatel.\n"
+"St谩hn臎te jej z\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"a zkop铆rujte soubor mgmt.o do /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tisk谩rna na serveru Windows 95/98/NT"
+msgid "Graphics memory: %s kB\n"
+msgstr "Pam臎钮 na gr. kart臎: %s kB\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "S铆钮ov谩 tisk谩rna (TCP/Socket)"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Tento program je svobodn媒 software; m暖啪ete ho 拧铆艡it a/nebo modifikovat\n"
+"podle specifikace GNU General Public Licence, kter谩 byla publikov谩na\n"
+"Free Software Foundation; bu膹 verze 2, nebo (podle volby) pozd臎j拧铆 verze.\n"
+"\n"
+"Tento program je distribuov谩n s nad臎j铆, 啪e bude u啪ite膷n媒,\n"
+"ale BEZ JAK脻CHKOLIV Z脕RUK; BEZ N脕ROKU NA PROFIT. V铆ce detail暖 naleznete\n"
+"v licenci GNU General Public Licence.\n"
+"\n"
+"Kopii GNU General Public Licence m暖啪ete obdr啪et bu膹 s t铆mto programem\n"
+"nebo si o n铆 m暖啪ete napsat na adresu Free Software Foundation, Inc.,\n"
+"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Tisk谩rna na vzd谩len媒 lpd serveru"
+msgid "access to compilation tools"
+msgstr "p艡铆stup k n谩stroj暖m pro kompilaci"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Tisk谩rna na vzd谩len茅m CUPS serveru"
+msgid "Please select data to restore..."
+msgstr "Pros铆m zvolte data pro obnovu..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Vzd谩len谩 tisk谩rna"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Jestli啪e chcete pou啪铆vat aboot, mus铆te nechat voln茅 m铆sto na za膷谩tku disku\n"
+"(2048 sektor暖 sta膷铆)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local printer"
-msgstr "M铆stn铆 tisk谩rna"
+msgid "Standard test page"
+msgstr "Standardn铆 testovac铆 str谩nka"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Nastavov谩n铆 aplikac铆..."
+msgid "Create"
+msgstr "Vytvo艡it"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "PrinterDrake"
+msgid "What"
+msgstr "Co"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Odeb铆r谩m tisk谩rnu \"%s\"..."
+msgid "There was an error ordering packages:"
+msgstr "Stala se chyba p艡i 艡azen铆 bal铆膷k暖:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tisk谩rnu \"%s\"?"
+msgid "Bulgarian (BDS)"
+msgstr "Bulharsk茅 (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove printer"
-msgstr "Odebrat tisk谩rnu"
+msgid "Disable Server"
+msgstr "Vypnout server"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "N谩pov臎da pro tisk na t茅to tisk谩rn臎"
+msgid "Filesystem encryption key"
+msgstr "Kl铆膷 pro 拧ifrovan媒 souborov媒 syst茅m"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Tisk testovac铆ch str谩nek"
+msgid "Gujarati"
+msgstr "Gujartsk茅"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Odebr谩n铆 tisk谩rny \"%s\" ze Star Office/OpenOffice.org/GIMP se nezda艡ilo."
+"Vyberte si pros铆m prvn铆 膷铆slo z v媒b臎ru, kter茅 chcete editovat,\n"
+"nebo stiskn臎te Enter pro pokra膷ov谩n铆.\n"
+"Va拧e volba? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr ""
-"Tisk谩rna \"%s\" byla 煤sp臎拧n臎 odebr谩na z aplikace Star Office/OpenOffice.org/"
-"GIMP."
+msgid "Save theme"
+msgstr "ulo啪it t茅ma"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Odeb铆r谩m tisk谩rnu ze Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "skupina"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Odebrat tisk谩rnu ze Star Office/OpenOffice.org/GIMP"
+msgid "Brazil"
+msgstr "Braz铆lie"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"P艡id谩n铆 tisk谩rny \"%s\" do Star Office/OpenOffice.org/GIMP se nezda艡ilo."
+msgid "Auto Install"
+msgstr "Automatick谩 instalace"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Tisk谩rna \"%s\" byla 煤sp臎拧n臎 p艡id谩na do Star Office/OpenOffice.org/GIMP."
+msgid "Network Configuration Wizard"
+msgstr "Pr暖vodce nastaven铆m s铆t臎"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "P艡id谩v谩m tisk谩rnu do Star Office/OpenOffice.org/GIMP"
+msgid "Removable media automounting"
+msgstr "Automatick茅 p艡ipojov谩n铆 pro vyj铆mateln谩 m茅dia"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "P艡idat tuto tisk谩rnu do Star Office/OpenOffice.org/GIMP"
+msgid "Printing"
+msgstr "Tisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tisk谩rna \"%s\" je nyn铆 nastavena jako v媒choz铆."
+msgid "Unkown driver"
+msgstr "Nezn谩m媒 ovlada膷"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Default printer"
-msgstr "V媒choz铆 tisk谩rna"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Na va拧em po膷铆ta膷i nebyla nalezena 啪谩dn谩 p艡铆mo p艡ipojen谩 tisk谩rna"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tisk谩rnu jako v媒choz铆"
+msgid "Create a new partition"
+msgstr "Vytvo艡it nov媒 odd铆l"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Mo啪nosti tisk谩rny"
+msgid "Driver:"
+msgstr "Ovlada膷:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "V媒robce tisk谩rny, model"
+msgid "unknown"
+msgstr "nezn谩m媒"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "V媒robce tisk谩rny, model, ovlada膷"
+msgid "Use fdisk"
+msgstr "Pou啪铆t fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Odeb铆r谩m starou tisk谩rnu \"%s\"..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "TO膶IT KOLE膶KEM!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "N谩zev tisk谩rny, popis, um铆st臎n铆"
+msgid "sent: "
+msgstr "odesl谩no: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Typ p艡ipojen铆 pro tisk谩rnu"
+msgid "Automatic IP"
+msgstr "Automatick谩 IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Nyn铆 je instalace ukon膷ena a opera膷n铆 syst茅m GNU/Linux je p艡ipraven k "
+"pou啪it铆.\n"
+"Klepn臎te na \"D谩le ->\" a syst茅m bude restartov谩n. Potom m暖啪ete spustit GNU/"
+"Linux nebo\n"
+"Windows, z谩le啪铆 kter媒 preferujete\n"
+"\n"
+"Tla膷铆tko \"Roz拧铆艡en茅\" zobraz铆 dal拧铆 dv臎 tla膷铆tka:\n"
+"\n"
+" * Generovat disketu pro automatickou instalaci: vytvo艡铆 disketu, se kterou\n"
+"lze celou instalaci opakovat bez z谩sahu oper谩tora se stejn媒mi volbami,\n"
+"kter茅 byly zvoleny p艡i instalaci.\n"
+"\n"
+" Po klepnut铆 na toto tla膷铆tko se zobraz铆 dal拧铆 dv臎 volby:\n"
+"\n"
+" * : \"Zopakovat\": je to 膷谩ste膷n臎 automatick谩 instalace, kdy se "
+"potvrzuje\n"
+"krok p艡i rozd臎lov谩n铆 disk暖 (a pouze tento krok).\n"
+"\n"
+" * : \"Automaticky\": pln臎 automatick谩 instalace, data na pevn茅m disku\n"
+"budou zru拧ena a disk p艡eps谩n.\n"
+"\n"
+" Tato volba je velmi u啪ite膷n谩, kdy啪 pot艡ebujete nainstalovat v臎t拧铆 po膷et\n"
+"stejn媒ch po膷铆ta膷暖. V铆ce o t茅to mo啪nosti je na na拧ich WWW str谩nk谩ch.\n"
+"\n"
+" * \"Ulo啪it v媒b臎r bal铆膷k暖\"(*): ulo啪铆 v媒b臎r bal铆膷k暖, kter媒 byl zvolen p艡i\n"
+"instalaci. Pokud budete instalovat dal拧铆 po膷铆ta膷, vlo啪te disketu do "
+"mechaniky\n"
+"a spus钮te instalaci, stiskn臎te [F1] a napi拧te na p艡铆kazov媒 艡谩dek \n"
+">> linux defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) Pot艡ebujete disketu form谩tovanou FAT (Pod Linuxem ji vytvo艡铆te p艡铆kazem\n"
+"\"mformat a:\")"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "P艡铆m媒 tisk na tisk谩rnu"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Prov茅st!"
+msgid "Configuration of a remote printer"
+msgstr "Nastaven铆 vzd谩len茅 tisk谩rny"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Close"
-msgstr "Zav艡铆t"
+msgid "Moldova"
+msgstr "Moldava"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+msgid "Please check if you want to erase your tape before the backup."
msgstr ""
-"Tisk谩rna %s\n"
-"Co chcete zm臎nit na t茅to tisk谩rn臎?"
+"Pokud chcete p艡ed z谩lohov谩n铆m va拧i p谩sku nejd艡铆ve smazat, pros铆m zatrhn臎te"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Zm臎nit nastaven铆 tisk谩rny"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+"Online platforma odpov铆daj铆c铆 specifick媒m pot艡eb谩m podpory spole膷nost铆."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "P艡idat novou tisk谩rnu"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL by m臎lo za膷铆nat znaky 'ftp:' nebo 'http:'"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Norm谩ln铆 re啪im"
+msgid "Add a new rule at the end"
+msgstr "P艡idat nov茅 pravidlo na konec"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Zm臎na tiskov茅ho syst茅mu"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"M暖啪ete se rozhodnout, zda v拧echny tisk谩rny na vzd谩len媒ch po膷铆ta膷铆ch budou "
+"dostupn茅 i na tomto po膷铆ta膷i"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Nastaven铆 CUPS"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Nyn铆 m暖啪ete poskytnout modulu %s dal拧铆 parametry.\n"
+"Volby se zad谩vaj铆 ve tvaru ''n谩zev=hodnota n谩zev2=hodnota2 ...''.\n"
+"Nap艡铆klad, ''io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Obnovit seznam tisk谩ren (pro z铆sk谩n铆 v拧ech vzd谩len媒ch CUPS tisk谩ren)"
+msgid "Quit without writing the partition table?"
+msgstr "Chcete skon膷it bez zaps谩n铆 do tabulky odd铆l暖?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Zobrazit seznam v拧ech vzd谩len媒ch CUPS tisk谩ren"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jsou nastaveny n谩sleduj铆c铆 tisk谩rny. Dvojit媒m klepnut铆m na ka啪dou z nich je "
-"mo啪n茅 je modifikovat, nastavit jako v媒choz铆 nebo o nich z铆skat informace."
+msgid "Installing packages..."
+msgstr "Instaluji bal铆膷ky..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Tiskov媒 syst茅m: "
+msgid "Dutch"
+msgstr "Holandsk茅"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Ov臎艡uj铆 nainstalovan媒 software..."
+msgid "The following packages need to be installed:\n"
+msgstr "Je pot艡eba nainstalovat tyto bal铆膷ky:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaluji Foomatic ..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Nastaven铆 tisk谩rny \"%s\" selhalo!"
+msgid "service setting"
+msgstr "nastaven铆 slu啪eb"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Nastavuji tisk谩rnu \"%s\"..."
+msgid "Custom"
+msgstr "Vlastn铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Na膷铆t谩m data k tisku ..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Soubor u啪 je pou啪铆v谩n jin媒m loopbackem, zvolte si jin媒"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kter媒 tiskov媒 syst茅m chcete pou啪铆t pro tisk?"
+msgid "Read-only"
+msgstr "Pouze pro 膷ten铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskov媒 syst茅m pro tisk谩rnu"
+msgid "Latvia"
+msgstr "Loty拧sko"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Nastavuji v媒choz铆 tisk谩rnu..."
+msgid "No known driver"
+msgstr "Nen铆 rozpozn谩n 啪谩dn媒 ovlada膷"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Instaluji %s ..."
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Odstra艌uji %s ..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Pokud nen铆 mezi nimi po啪adovan谩 tisk谩rna, zadejte do pol铆膷ka n谩zev za艡铆zen铆/"
+"n谩zev souboru"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Tiskov媒 syst茅m (%s) nebude automaticky spu拧t臎n p艡i startu po膷铆ta膷e.\n"
+"You can visit our hardware database at:\n"
"\n"
-"Je mo啪n茅, 啪e volba automatick茅ho startu byla vypnuta ve vy拧拧铆 bezpe膷nostn铆 "
-"煤rovni, proto啪e tiskov媒 syst茅m je potenci谩ln铆 nebezpe膷铆 pro s铆钮ov媒 煤tok.\n"
"\n"
-"Chcete nastavit zp臎t automatick媒 start tiskov茅ho syst茅mu?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskov媒 syst茅m p艡i startu syst茅mu"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
+"V po膷铆ta膷i nebyla nalezena 啪谩dn谩 zvukov谩 karta karta. Zkontrolujte pros铆m,"
+"zda podporovan谩 karta je spr谩vn臎 zapojena.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Pokou拧铆te se instalovat tiskov媒 syst茅m %s na po膷铆ta膷, b臎啪铆c铆 v bezpe膷nost铆 "
-"煤rovni %s.\n"
+"Datab谩zi hardware lze nal茅zt na:\n"
"\n"
-"Tiskov媒 syst茅m pracuje jako d茅mon (proces na pozad铆), kter媒 膷ek谩 na tiskov茅 "
-"煤lohy a zpracov谩v谩 je. Tento d茅mon je tak茅 p艡铆stupn媒 ze s铆t臎 pro jin茅 "
-"po膷铆ta膷e, tak啪e se m暖啪e st谩t p艡edm臎tem s铆钮ov茅ho 煤toku. Proto je vybr谩no "
-"pouze n臎kolik slu啪eb, kter茅 jsou v t茅to 煤rovni spu拧t臎ny automaticky p艡i "
-"startu.\n"
"\n"
-"Chcete opravdu nastavit tiskov媒 syst茅m na tomto po膷铆ta膷i?"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskov媒 syst茅m v bezpe膷nostn铆 煤rovni %s"
+msgid "Configure Local Area Network..."
+msgstr "Nastavuji lok谩ln铆 s铆钮..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoidn铆"
+msgid "Launch the sound system on your machine"
+msgstr "Spustit zvukov媒 syst茅m p艡i startu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "vysok谩"
+msgid "Preparing printer database..."
+msgstr "Na膷铆t谩m datab谩zi tisk谩ren ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Restartuji tiskov媒 syst茅m ..."
+msgid "Information"
+msgstr "Informace"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Nastaven铆 vzd谩len茅 tisk谩rny"
+msgid "No network card"
+msgstr "沤谩dn谩 s铆钮ov谩 karta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"S铆钮 nefunguje a nelze ji spustit. Pros铆m zkontrolujte nastaven铆 hardware. "
-"Pak se op臎t pokuste prov茅st nastaven铆 vzd谩len茅 tisk谩rny."
+msgid "Which filesystem do you want?"
+msgstr "Kter媒 souborov媒 syst茅m chcete pou啪铆t?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nastaven铆 s铆t臎 proveden茅 p艡i instalaci nelze nyn铆 aktivovat. Zkontrolujte, "
-"zda je s铆钮 dostupn谩 po spu拧t臎n铆 syst茅mu a nastaven铆 opravte v ovl谩dac铆m "
-"centru Mandrake, v sekci \"S铆钮 a Internet\"/\"P艡ipojen铆\" a n谩sledn臎 "
-"nastavte tisk谩rnu tak茅 v ovl谩dac铆m centru v sekci \"Hardware\"/\"Tisk谩rna\""
+msgid "3 buttons"
+msgstr "3 tla膷铆tka"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Nastavit s铆钮 nyn铆"
+msgid "Detailed information"
+msgstr "Podrobn茅 informace"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Pokra膷ovat bez nastaven铆 s铆t臎"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Nyn铆 za膷ne konfigurace vzd谩len茅 tisk谩rny. To vy啪aduje funk膷n铆 s铆钮ov茅 "
-"spojen铆, ale s铆钮 nen铆 zat铆m nastavena. Pokud budete pokra膷ovat bez nastaven铆 "
-"s铆t臎, nebude mo啪n茅 pou啪铆t tisk谩rnu, kterou po啪adujete. Jak chcete pokra膷ovat?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "S铆钮 nen铆 nastavena"
+"V媒choz铆 nastaven铆 pro tisk谩rnu\n"
+"\n"
+"Ujist臎te se, 啪e typ str谩nky a typ inkoustu/re啪im tisku (pokud je) a tak茅 "
+"hardwarov谩 konfigurace laserov茅 tisk谩rny (pam臎钮, duplexn铆 jednotka, extern铆 "
+"podava膷) jsou nastaveny spr谩vn臎. P艡i tisku ve velmi vysok茅 kvalit臎/rozli拧en铆 "
+"bude tisk z艡ejm臎 pomalej拧铆."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Spou拧t铆m s铆钮 ...."
+msgid "This floppy is not FAT formatted"
+msgstr "Tato disketa nen铆 form谩tov谩na"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Ob膷erstvuji tiskov谩 data ...."
+msgid "Configuring network"
+msgstr "Nastavuji s铆钮"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Byla p艡enesena v媒choz铆 tisk谩rna (\"%s\"). M谩 se nastavit jako v媒choz铆 tak茅 "
-"na vzd谩len茅m tiskov茅m syst茅mu %s?"
+msgid "Graphic Card"
+msgstr "Grafick谩 karta"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "P艡en茅st konfiguraci tisk谩rny"
+msgid "Resizing Windows partition"
+msgstr "Po膷铆t谩m hranice souborov茅ho syst茅mu s Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "P艡en谩拧铆m %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "DNS poskytovatele 膷.1 (voliteln茅)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nov媒 n谩zev tisk谩rny"
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Tisk谩rna s n谩zvem %s ji啪 existuje,\n"
-"chcete opravdu p艡epsat jej铆 konfiguraci?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "N谩zev fronty m暖啪e obsahovat pouze p铆smena, 膷铆slice a podtr啪铆tko"
+"Nyn铆 m暖啪ete rozd臎lit v谩拧 pevn媒 disk %s.\n"
+"A啪 skon膷铆te, nezapome艌te ulo啪it zm臎ny pomoc铆 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "P艡en茅st"
+msgid "Close"
+msgstr "Zav艡铆t"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Tisk谩rna s n谩zvem \"%s\" ji啪 na stran臎 %s existuje.\n"
-"Klepn臎te na \"P艡en茅st\" pro p艡eps谩n铆.\n"
-"Tak茅 m暖啪ete napsat nov媒 n谩zev nebo ji p艡esko膷it."
+"\"Zem臎\": zkontrolujte aktu谩ln铆 v媒b臎r zem臎. Pokud nejste v dan茅 zemi, "
+"klepn臎te\n"
+"na tla膷铆tko \"Nastavit\" a vyberte si jinou. Pokud va拧e zem臎 na prvn铆m "
+"seznamu,\n"
+"klepn臎te na tla膷铆tko \"V铆ce\" a z铆sk谩te kompletn铆 seznam zem铆."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Nep艡en谩拧et tisk谩rny"
+msgid "Calendar"
+msgstr "Kalend谩艡"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Ozna膷te tisk谩rnu, kterou chcete p艡en茅st a stiskn臎te \"P艡en茅st\"."
+"Vybr谩na obnova\n"
+"Z谩znam katalogu"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Tak茅 tisk谩rny pou啪铆vaj铆c铆 PPD soubory od jejich v媒robc暖 nebo tisk谩rny s "
-"nativn铆mi ovlada膷i pro CUPS nelze p艡en茅st."
+"Abyste mohli pou啪铆vat vzd谩lenou tiskovou frontu lpd, mus铆te zadat n谩zev "
+"tiskov茅ho serveru a n谩zev tisk谩rny, kam m谩 b媒t pos铆l谩n tisk."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Tiskov茅 fronty, kter茅 nebyly vytvo艡eny t铆mto programem nebo p艡es \"foomatic-"
-"configure\" nelze p艡en茅st."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LprNG nepodporuj铆 IPP tisk谩rny.\n"
+msgid "consolehelper missing"
+msgstr "chyb铆 consolehelper"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje pouze m铆stn铆 tisk谩rny, vzd谩len茅 tisk谩rny LPD a tisk na "
-"tisk谩rny p艡es sokety/TCP.\n"
+msgid "stopped"
+msgstr "zastaveno"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tisk谩rny na serverech Novell nebo tisk谩rny, kter茅 pos铆laj铆 "
-"data na skupinu p艡铆kaz暖.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Zda m谩 FPU irq vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Konfiguraci tisk谩rny, kterou jste provedli pro frontu %s lze p艡en茅st na "
-"frontu %s, tj. na sou膷asnou frontu. V拧echna nastaven谩 data (n谩zev tisk谩rny, "
-"popis, um铆st臎n铆, typ p艡ipojen铆 a dal拧铆 v媒choz铆 nastaven铆) budou p艡eps谩na, "
-"ale tiskov茅 煤lohy nebudou p艡eneseny.\n"
-"Ne v拧echny fronty lze p艡en茅st z n谩sleduj铆c铆ch d暖vod暖:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Va拧e tisk谩rna byla automaticky nastavena tak, 啪e m谩te ze sv茅ho PC p艡铆stup ke "
-"膷te膷ce karty. Nyn铆 m暖啪ete p艡istupovat ke sv媒m fotografick媒m kart谩m pomoc铆 "
-"grafick茅ho programu \"MtoolsFM\" (Menu: \"Aplikace\" -> \"Souborov茅 n谩stroje"
-"\" -> \"Spr谩vce soubor暖 MTools\") nebo z p艡铆kazov茅 艡谩dky pomoc铆 n谩stroje "
-"\"mtools\" (zadejte \"man mtools\", chcete-li z铆skat v铆ce informac铆). "
-"Souborov媒 syst茅m va拧i karty naleznete pod p铆smenem za艡铆zen铆 \"p:\", p艡铆padn臎 "
-"dal拧铆ch p铆smenech, pokud m谩te v铆ce tisk谩ren HP se 膷te膷kou karet. V programu "
-"\"MtoolsFM\" m暖啪ete p艡ep铆nat mezi p铆smeny za艡铆zen铆 pomoc铆 pol铆膷ka v prav茅m "
-"horn铆m rohu ka啪d茅ho v媒膷tu soubor暖."
+msgid "Expand Tree"
+msgstr "Rozbalit v臎tev"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Multifunk膷n铆 za艡铆zen铆 od HP bylo automaticky nastaveno pro mo啪nost "
-"skenov谩n铆. Nyn铆 lze skenovat z p艡铆kazov茅ho 艡谩dku p艡铆kazem \"scanimage"
-"\" (p艡铆kazem \"scanimage -d hp:%s\" zvol铆te po啪adovan媒 skener, pokud jich "
-"m谩te v铆ce) nebo z grafick茅ho prost艡ed铆 pomoc铆 \"xscanimage\" nebo \"xsane\". "
-"Pokud pou啪铆v谩te program GIMP, m暖啪ete tak茅 skenovat v媒b臎rem z nab铆dky \"Soubor"
-"\"/\"Z铆skat\". V铆ce informac铆 z铆sk谩te tak茅 p艡铆kazem \"man scanimage\" "
-"spu拧t臎n媒m na p艡铆kazov茅 艡谩dce.\n"
+"Star拧铆 ovlada膷 \"%s\" je na 膷ern茅 listin臎.\n"
"\n"
-"Nepou啪铆vejte pro toto za艡铆zen铆 \"scannerdrake\"!"
+"Bylo u n臎j zji拧t臎no, 啪e p艡i odebr谩n铆 zp暖sob铆 p谩d j谩dra.\n"
+"\n"
+"P艡i dal拧铆m spu拧t臎n铆 bude pou啪it pouze nov媒 ovlada膷 \"%s\" "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Tisknu testovac铆 str谩nku(y)"
+msgid "Expert Mode"
+msgstr "Expertn铆 re啪im"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Print option list"
+msgid "Printer options"
msgstr "Mo啪nosti tisk谩rny"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisknu na tisk谩rnu \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Tisk/P艡铆stup k foto kart谩m na \"%s\""
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tisk/Skenov谩n铆 na \"%s\""
+msgid "Local Network adress"
+msgstr "Adresa lok谩ln铆 s铆t臎"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tisk/Skenov谩n铆/Foto karty na \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Z谩lohovat va拧e syst茅mov茅 soubory. (adres谩艡 /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"V拧echny mo啪nosti dostupn茅 pro sou膷asnou tisk谩rnu jsou vyps谩ny n铆啪e, nebo "
-"klepn臎te na tla膷铆tko \"Mo啪nosti tisk谩rny\".%s%s%s\n"
+"Nyn铆 m谩te mo啪nost st谩hnout aktualizovan茅 bal铆膷ky. Tyto bal铆膷ky byly\n"
+"uvoln臎ny a啪 po vyd谩n铆 distribuce. Mohou obsahovat bezpe膷nostn铆\n"
+"aktualizace nebo opravy chyb.\n"
"\n"
+"Chcete-li z铆skat tyto bal铆膷ky, mus铆te m铆t k dispozici funk膷n铆 p艡ipojen铆\n"
+"k Internetu.\n"
+"\n"
+"Chcete nainstalovat aktualizace?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Server Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumenty: (arg, alert=1)\n"
"\n"
-"P艡铆kazy \"%s\" a \"%s\" dovoluj铆 m臎nit volby pro ka啪dou tiskovou 煤lohu. "
-"Jednodu拧e zadejte pot艡ebn茅 nastaven铆 do p艡铆kazov茅 艡谩dky, nap艡. \"%s <soubor>"
-"\".\n"
+"Povol铆/Zak谩啪e ochranu p艡ed IP spoofing."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Lze tak茅 pou啪铆t grafick茅 rozhran铆 \"xpdq\" pro nastaven铆 mo啪nost铆 a ke "
-"spr谩v臎 tiskov媒ch 煤loh.\n"
-"Pokud pou啪铆v谩te grafick茅 prost艡ed铆 KDE, m谩te na pracovn铆 plo拧e ikonu "
-"pojmenovanou \"STOP Printer!\", kter媒 po klepnut铆 ihned zastav铆 v拧echny "
-"tiskov茅 煤lohy. To je vhodn茅 t艡eba pro p艡铆pady uv铆znut铆 pap铆ru.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australsk谩 kabelov谩 televize Optus"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Tento p艡铆kaz lze nastavit do pol铆膷ka \"P艡铆kazy tisku\" v dialogu tisku ve "
-"v臎t拧in臎 aplikac铆, ale nezad谩v谩 se zde n谩zev souboru, kter茅 je poka啪d茅 jin茅 v "
-"z谩vislosti na dan茅 aplikaci.\n"
+" <Tab>/<Alt-Tab> p艡epn. mezi prvky | <Space> v媒b臎r | <F12> dal拧铆 obraz."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vyti拧t臎n铆 souboru z p艡铆kazov茅 艡谩dky (v termin谩lov茅m okn臎) pou啪ijte "
-"p艡铆kaz \"%s <soubor>\" nebo \"%s <soubor>\".\n"
+msgid "Subnet:"
+msgstr "Pods铆钮:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"V拧echny mo啪nosti tisku pro sou膷asnou tisk谩rnu jsou zobrazeny n铆啪e, nebo "
-"klepn臎te na tla膷铆tko \"Mo啪nosti tisk谩rny\"."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"P艡铆kaz \"%s\" dovoluje modifikovat volby pro ka啪dou tiskovou 煤lohu. "
-"Jednodu拧e zadejte pot艡ebn茅 nastaven铆 do p艡铆kazov茅 艡谩dky, nap艡. \"%s<soubor>"
-"\". "
+msgid "Please enter the host name or IP."
+msgstr "Zadejte pros铆m n谩zev po膷铆ta膷e nebo IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vyti拧t臎n铆 souboru z p艡铆kazov茅 艡谩dky (v termin谩lov茅m okn臎) pou啪ijte "
-"p艡铆kaz \"%s <soubor>\".\n"
+msgid "When"
+msgstr "Kdy"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Druh媒 DNS Server (nepovinn媒)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finsko"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Zde je seznam dostupn媒ch voleb pro nastaven铆 tisku pro aktu谩ln铆 tisk谩rnu:\n"
+"Argumenty: (arg)\n"
"\n"
+"Autorizuje v拧echny slu啪by kontrolovan茅 tcp_wrappers (v铆ce hosts.deny(5)) "
+"pokud je nastaveno \\fIarg\\fP = ALL. Autorizuje\n"
+"pouze lok谩ln铆, pokud je nastaveno \\fIarg\\fP = LOCAL a nic pokud je\n"
+"nastaveno \\fIarg\\fP = NONE. V铆ce najdete v man hosts.allow(5)."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto p艡铆kazy lze nastavit do pol铆膷ka \"P艡铆kazy tisku\" v dialogu tisku ve "
-"v臎t拧in臎 aplikac铆, ale nezad谩v谩 se zde n谩zev souboru, kter茅 je poka啪d茅 jin茅 v "
-"z谩vislosti na dan茅 aplikaci.\n"
+msgid "Color depth: %s\n"
+msgstr "Barevn谩 hloubka: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z p艡铆kazov茅 艡谩dky (termin谩lov茅ho okna) lze bu膹 p艡铆kazem\n"
-"\"%s<soubor>\" nebo p艡es grafick茅 n谩stroje: \"xpp <soubor> nebo \"kprinter "
-"<soubor>\". Grafick茅 n谩stroje umo啪艌uj铆 jednodu拧e vybrat tisk谩rny a m臎nit "
-"jejich parametry.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Tento bal铆膷ek mus铆 b媒t obnoven, nem暖啪ete ho nezvolit"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Prob臎hl tisk spr谩vn臎 ?"
+msgid "Loading from floppy"
+msgstr "Nahr谩v谩m z diskety"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Zku拧ebn铆 str谩nka byl posl谩na na tisk谩rnu.\n"
-"M暖啪e chvilku trvat ne啪 za膷ne tisk.\n"
+"Aplikace DrakPerm se pou啪铆v谩 k zobrazen铆 soubor暖, kter茅 se pou啪铆vaj铆 k "
+"煤prav谩m opr谩vn臎n铆, vlastn铆k暖 a skupin aplikac铆 msec.\n"
+"M暖啪ete tak茅 vytv谩艡et sv谩 vlastn铆 pravidla, kter谩 p艡ep铆拧铆 pravidla v媒choz铆."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Zku拧ebn铆 str谩nka(y) byla(y) posl谩na(y) na tisk谩rnu.\n"
-"M暖啪e chvilku trvat ne啪 za膷ne tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Netisknout testovac铆 str谩nku"
+msgid "Slovenia"
+msgstr "Slovinsko"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Testovac铆 str谩nka s fotografi铆"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Zadejte u啪ivatele\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativn铆 testovac铆 str谩nka (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- za艡铆zen铆 PCI a USB: vypisuje se dodavatel, za艡铆zen铆, subdodavatel a "
+"podza艡铆zen铆 (ID PCI/USB)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativn铆 testovac铆 str谩nka (Letter)"
+msgid "ProgressBar color selection"
+msgstr "V媒b臎r barvy pro li拧tu s pr暖b臎hem"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standardn铆 testovac铆 str谩nka"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Tady jsou v拧echny z谩znamy.\n"
+"M暖啪ete p艡idat dal拧铆 nebo zm臎nit st谩vaj铆c铆."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Tisk"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Bez testovac铆 str谩nky"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Vyberte si testovac铆 str谩nku, kterou chcete vytisknout.\n"
-"Pozn谩mka: tisk testovac铆 str谩nky s fotografi铆 m暖啪e trvat velmi dlouho nebo "
-"se na tisk谩rn臎 s m谩lo pam臎t铆 nemus铆 poda艡it v暖bec. Ve v臎t拧in臎 p艡铆pad暖 sta膷铆 "
-"vytisknout b臎啪nou testovac铆 str谩nku."
+"Spou拧t铆 p艡铆kazy napl谩novan茅 p艡铆kazem na ur膷it媒 膷as p艡铆kazem 'at'.\n"
+"Tak茅 spou拧t铆 p艡铆kazy p艡i n铆zk茅m vyt铆啪en铆 syst茅mu."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testovac铆 str谩nka"
+msgid "Radio support:"
+msgstr "Podpora r谩dia :"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tisk谩rnu \"%s\"\n"
-"jako v媒choz铆?"
+msgid "Installing SANE packages..."
+msgstr "Instaluji bal铆膷ky pro SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
+msgid "boot disk creation"
+msgstr "vytv谩艡en铆 zav谩d臎c铆ch disket"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s mus铆 b媒t 膷铆slo!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s mus铆 b媒t cel茅 膷铆slo!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "V媒choz铆 nastaven铆 tisk谩rny"
+msgid "Change type"
+msgstr "Zm臎nit typ"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Instalace SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Pou啪铆t pro z谩lohov谩n铆 CD/DVD-ROM"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"V媒choz铆 nastaven铆 pro tisk谩rnu\n"
+"Gratulujeme v谩m, instalace je dokon膷ena.\n"
+"Vyjm臎te startovac铆 m茅dia a stiskn臎te Return pro restart.\n"
"\n"
-"Ujist臎te se, 啪e typ str谩nky a typ inkoustu/re啪im tisku (pokud je) a tak茅 "
-"hardwarov谩 konfigurace laserov茅 tisk谩rny (pam臎钮, duplexn铆 jednotka, extern铆 "
-"podava膷) jsou nastaveny spr谩vn臎. P艡i tisku ve velmi vysok茅 kvalit臎/rozli拧en铆 "
-"bude tisk z艡ejm臎 pomalej拧铆."
+"\n"
+"Na opravy t茅to instalace syst茅mu Mandrake Linux se lze informovat\n"
+"na str谩nce Errata:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Informace o konfiguraci syst茅mu po instalaci jsou dostupn茅\n"
+"v dan茅 kapitole ofici谩ln铆 u啪ivatelsk茅 p艡铆ru膷ky pro Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Upload firmware pro HP LaserJet 1000"
+msgid "paranoid"
+msgstr "paranoidn铆"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Poslat report po z谩loze mailem na :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Aby bylo mo啪n茅 p艡i tomto nastaven铆 tisknout na inkoustov媒ch tisk谩rn谩ch od "
-"firmy Lexmark, je pot艡eba m铆t tiskov媒 ovlada膷 poskytovan媒 spole膷nost铆 "
-"Lexmark (http://www.lexmark.com/). Klepn臎te na odkaz \"Drivers\", vyberte "
-"v谩拧 model tisk谩rny, a pot茅 zvolte Linux jako opera膷n铆 syst茅m. Ovlada膷e jsou "
-"v RPM bal铆膷c铆ch nebo skripty shellu s interaktivn铆 grafickou instalac铆. Tu "
-"ale k nastaven铆 va拧eho syst茅mu nepot艡ebujete. Ukon膷ete instala膷n铆 program "
-"ihned po odsouhlasen铆 licence. Pak m暖啪ete vytisknout str谩nku s nastaven铆m "
-"tiskov媒ch hlav programem \"lexmarkmaintain\" a nastavit zarovn谩n铆 tiskov茅 "
-"hlavy pomoc铆 tohoto programu."
+"Tento p艡铆kaz lze nastavit do pol铆膷ka \"P艡铆kazy tisku\" v dialogu tisku ve "
+"v臎t拧in臎 aplikac铆, ale nezad谩v谩 se zde n谩zev souboru, kter茅 je poka啪d茅 jin茅 v "
+"z谩vislosti na dan茅 aplikaci.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Nastaven铆 inkoustov茅 tisk谩rny Lexmark"
+msgid "Resolution"
+msgstr "Rozli拧en铆"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Inkoustov茅 tisk谩rny dod谩van茅 firmou Lexmark podporuj铆 pouze tisk na lok谩ln铆 "
-"tisk谩rn臎, tak啪e nelze tisknout p艡es vzd谩len媒 server. Pros铆m p艡ipojte "
-"tisk谩rnu na lok谩ln铆 port nebo ji nastavte na tom po膷铆ta膷i, ke kter茅mu bude "
-"p艡ipojena."
+"Abyste mohli tisknout na SMB tisk谩rn臎, mus铆te zadat n谩zev SMB po膷铆ta膷e"
+"(Pozor! To m暖啪e b媒t odli拧n茅 od jeho TCP/IP n谩zvu) a mo啪n谩 i IP adresu "
+"tiskov茅ho serveru, n谩zev sd铆len茅 tisk谩rny, vhodn茅 u啪ivatelsk茅 jm茅no, heslo a "
+"informace o pracovn铆 skupin臎."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Nyn铆 nastavujete laserovou tisk谩rnu OKI winprinter. Tyto tisk谩rny pou啪铆vaj铆 "
-"velmi specifick媒 komunika膷n铆 protokol a mohou pracovat pouze pokud jsou "
-"p艡ipojeny k prvn铆mu paraleln铆mu portu. Pokud je tisk谩rna p艡ipojena na jin媒 "
-"port, nebo se tiskne p艡es server, p艡ipojte tisk谩rnu na prvn铆 paraleln铆 port. "
-"Jinak tisk nebude pracovat. Typ p艡ipojen铆 bude ovlada膷 ignorovat."
+"Argumenty: (arg)\n"
+"\n"
+"Akceptuje/Odm铆tne icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Nastaven铆 pro OKI win-tisk谩rnu"
+msgid "reconfigure"
+msgstr "p艡ekonfigurovat"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Pokud nen铆 tisk谩rna v seznamu, vyberte kompatibiln铆 nebo podobn媒 model "
-"(pod铆vejte se do manu谩lu)"
+"S XFree %s m暖啪e va拧e karta vyu啪铆t 3D hardwarov茅 akcelerace.\n"
+" TOTO JE POUZE EXPERIMENT脕LN脥 VERZE, A M女沤E V脡ST K NESTABILIT臍 SYST脡MU."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Zkontrolujte pros铆m, zda PrinterDrake provedl automatickou detekci modelu "
-"spr谩vn臎. Pokud je vyzna膷en nespr谩vn媒 model, m暖啪ete ho zm臎nit v媒b臎rem ze "
-"seznamu nebo zvolte \"P艡铆m媒 tisk\"."
+msgid "Xinetd Service"
+msgstr "Slu啪ba Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Jak媒 model tisk谩rny m谩te?"
+msgid "access to network tools"
+msgstr "p艡铆stup k s铆钮ov媒m n谩stroj暖m"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "V媒b臎r modelu tisk谩rny"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Upload firmware pro HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Na膷铆t谩m datab谩zi tisk谩ren ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 v谩m dovoluje naplno vyu啪铆t posledn铆 software pro "
+"p艡ehr谩v谩n铆 hudebn铆ch soubor暖, editovat 膷i pracovat s va拧imi obr谩zky nebo "
+"fotografiemi, 膷i sledovat video."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Vybrat model ru膷n臎"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Zde je seznam automaticky detekovan媒ch tisk谩ren. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Zvolen媒 model je spr谩vn媒"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Stala se chyba p艡i instalaci aboot,\n"
+"m谩m se pokusit o instalaci i kdy啪 to zru拧铆 prvn铆 odd铆l na disku?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"PrinterDrake provedl porovn谩n铆 modelu tisk谩rny, kter媒 byl zji拧t臎n p艡i auto-"
-"detekci s modelem obsa啪en媒m v jeho datab谩zi a nab铆dl nejlep拧铆 艡e拧en铆. Tato "
-"volba m暖啪e b媒t 拧patn谩, zvl谩拧钮 pokud nen铆 tisk谩rna obsa啪ena v datab谩zi. "
-"Zkontrolujte, zda je volba spr谩vn谩 a klepn臎te na \"Zvolen媒 model je spr谩vn媒"
-"\" a pokud nen铆, volte \"Vybrat model ru膷n臎\". V dal拧铆 obrazovce potom bude "
-"mo啪n茅 vybrat model tisk谩rny ru膷n臎.\n"
+"Popis voleb:\n"
"\n"
-"Pro va拧i tisk谩rnu PrinterDrake nalezl:\n"
+" V tomto kroku v谩m aplikace DrakBackup umo啪n铆 zm臎nit:\n"
+"\n"
+" - Re啪im komprese:\n"
+" \n"
+" Pokud zvol铆te kompresi bzip2, budete m铆t kompresi\n"
+" lep拧铆 ne啪 pomoc铆 gzip (okolo 2-10%%).\n"
+" Tato volba nen铆 zvolena jako v媒choz铆, proto啪e\n"
+" vy啪aduje daleko v铆ce 膷asu (a啪 o 1000%% v铆ce).\n"
+"\n"
+" - Re啪im aktualizace:\n"
+"\n"
+" Tato volba aktualizuje z谩lohu, ale nen铆 moc u啪ite膷n谩,\n"
+" proto啪e p艡ed aktualizac铆 mus铆te nejd艡铆ve z谩lohu\n"
+" dekomprimovat.\n"
+" \n"
+"- Re啪im pou啪it铆 souboru .backupignore:\n"
+"\n"
+" Stejn臎 jako pro cvs, i pro DrakBackup lze uv茅st seznam\n"
+" soubor暖 v .backupignore, kter茅 budou p艡i z谩lohov谩n铆 ignorov谩ny.\n"
+" nap艡.:\n"
+" \\$> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Model tisk谩rny"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Vybr谩na obnova\n"
+"Soubory"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Na膷铆t谩m datab谩zi tisk谩ren ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s existuje, smazat?\n"
+"\n"
+"Varov谩n铆: Pokud jste tak ji啪 jednou u膷inili, budete nejsp铆拧 muset\n"
+"vymazat p艡铆slu拧n媒 z谩znam ze souboru authorized_keys na serveru."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Um铆st臎n铆"
+msgid "Please fill or check the field below"
+msgstr "Pros铆m vypl艌te nebo zkontrolujte n谩sleduj铆c铆 煤daje"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Popis"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Chcete ulo啪it 煤pravy souboru /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "N谩zev tisk谩rny"
+msgid "Boot Protocol"
+msgstr "Protokol o spu拧t臎n铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka啪d谩 tisk谩rna pot艡ebuje n谩zev (nap艡. \"tiskarna\"). Popis a um铆st臎n铆 nemus铆 "
-"b媒t vypln臎ny. Jsou to koment谩艡e pouze pro u啪ivatele."
+msgid "LVM-disks %s\n"
+msgstr "LVM disky %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Zadejte n谩zev tisk谩rny a koment谩艡"
+msgid "The package %s is needed. Install it?"
+msgstr "Bal铆膷ek %s mus铆 b媒t nainstalov谩n. Chcete ho nainstalovat?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Nastavuji tiskov媒 port vyu啪iteln媒 pro CUPS..."
+msgid "On boot"
+msgstr "P艡i spu拧t臎n铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Testuji za艡铆zen铆 a nastavuji HPOJ..."
+msgid "Bus identification"
+msgstr "Identifikace sb臎rnice"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "P艡铆stup k pam臎钮ov茅 kart臎 na multifunk膷n铆m za艡铆zen铆 od HP"
+msgid "Please make a backup of your data first"
+msgstr "Z谩lohujte si nejd艡铆v sv谩 data, pros铆m"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Vyhled谩v谩m multifunk膷n铆 za艡铆zen铆 od HP"
+msgid "Vatican"
+msgstr "Vatik谩n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaluji bal铆膷ky pro mtools..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "M谩te v铆ce ne啪 jeden pevn媒 disk, na kter媒 chcete instalovat Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaluji bal铆膷ky pro SANE..."
+msgid "Boot ISO"
+msgstr "Spou拧t臎c铆 ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instaluji bal铆膷ek HPOJ..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Je va拧e tisk谩rna multifunk膷n铆 za艡铆zen铆 od HP nebo od Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 se skenerem, Sony IJP-V100) nebo HP "
-"PhotoSmart 膷i HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Odebrat seznam"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Mus铆 b媒t zad谩n n臎jak媒 p艡铆kaz!"
+msgid "A customizable environment"
+msgstr "P艡izp暖sobiteln茅 prost艡ed铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "P艡铆kazov谩 艡谩dka"
+msgid "Inuktitut"
+msgstr "Inuktitutsk茅"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Zde m暖啪ete zadat libovoln媒 p艡铆kaz, do kter茅ho bude pos铆l谩m v媒stup z tiskov茅 "
-"煤lohy m铆sto p艡铆m茅ho odesl谩n铆 na tisk谩rnu."
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Poslat do p艡铆kazu"
+msgid "Which printer model do you have?"
+msgstr "Jak媒 model tisk谩rny m谩te?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Nalezen model: %s %s"
+msgid "Add a new printer"
+msgstr "P艡idat novou tisk谩rnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Mus铆 b媒t zad谩no spr谩vn茅 URI!"
+msgid " All of your selected data have been "
+msgstr " V拧echna vybran谩 data byla "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI Tiskov茅ho Za艡铆zen铆"
+msgid "<-- Delete"
+msgstr "<-- Smazat"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze p艡铆mo zadat URI pro p艡铆stup k tisk谩rn臎. URI mus铆 spl艌ovat bu膹 "
-"specifikaci CUPS nebo Foomatic. Tak茅 pamatujte na to, 啪e v拧echny URI nejsou "
-"podporov谩ny ve v拧ech tiskov媒ch spr谩vc铆ch."
+msgid "Nepal"
+msgstr "Nep谩l"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu #"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "N谩zev nebo IP adresa tisk谩rny"
+msgid "chunk size"
+msgstr "Velikost bloku (chunk)"
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "膶铆slo portu mus铆 b媒t cel茅 膷铆slo!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Chyb铆 n谩zev nebo IP adresa tisk谩rny!"
+msgid "Problems installing package %s"
+msgstr "Probl茅m s instalac铆 bal铆膷ku %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Abyste mohli tisknout na TCP nebo soketov茅 tisk谩rn臎, mus铆te zadat n谩zev nebo "
-"IP adresu tisk谩rny a voliteln臎 i 膷铆slo portu (v媒choz铆 je 9100). V p艡铆pad臎 "
-"server暖 HP JetDirect je 膷铆slo portu obvykle 9100, u jin媒ch server暖 m暖啪e b媒t "
-"jin茅. Pod铆vejte se do manu谩lu k va拧emu hardware."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Pokud bude hodnota vet拧铆 ne啪 zadan茅 膷铆slo, obdr啪铆te varovnou zpr谩vu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Vyberte ze seznamu jednu z automaticky nalezen媒ch tisk谩ren nebo zadejte do "
-"pol铆膷ek n谩zev nebo IP adresu tisk谩rny a voliteln臎 膷铆slo portu (v媒choz铆 je "
-"9100)."
+"\n"
+"\n"
+"Chcete-li poslat hl谩拧en铆 o chyb臎, klepn臎te na tla膷铆tko pro nahl谩拧en铆 chyby.\n"
+"Otev艡e se okno prohl铆啪e膷e s铆t臎 Internet na adrese https://drakbug."
+"mandrakesoft.com,\n"
+"kde najdete formul谩艡 k vypln臎n铆. V媒拧e zobrazen茅 informace budou na tento "
+"server\n"
+"rovn臎啪 p艡eneseny.\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Mo啪nosti tisk谩rny pro TCP/Socket"
+msgid "Add a scanner manually"
+msgstr "P艡idat skener ru膷n臎"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Po膷铆ta膷 \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Znovu na膷铆st tabulku odd铆l暖"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", po膷铆ta膷 \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ano, chci automatick茅 p艡ihl谩拧en铆 s t铆mto (u啪ivatelem, desktopem)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Zkoum谩m s铆钮...."
+msgid "Search for fonts in installed list"
+msgstr "Hledat fonty mezi instalovan媒mi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Autodetekce tisk谩rny"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "膶铆slo lok谩ln铆 s铆t臎 nekon膷铆 na .0, zkou拧铆m znovu."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Chyb铆 n谩zev tiskov茅 fronty pro NCP!"
+msgid "Boot"
+msgstr "Spu拧t臎n铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Chyb铆 n谩zev pro sd铆len铆 p艡es NCP!"
+msgid "Tuner type:"
+msgstr "Typ tuneru :"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "N谩zev tiskov茅 fronty"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Zde si m暖啪ete vybrat tiskov媒 syst茅m, kter媒 budete pou啪铆vat. Jin茅 OS "
+"nab铆zej铆\n"
+"jeden, Mandrake nab铆z铆 dva. Ka啪d媒 z nich je nejvhodn臎j拧铆 pro r暖zn茅 typy\n"
+"konfigurac铆.\n"
+"\n"
+" * \"pdq\" - co啪 znamen谩 'print, don't queue' a je vhodn媒 tehdy, pokud "
+"nem谩te\n"
+"啪谩dn茅 s铆钮ov茅 tisk谩rny. Zvl谩d谩 pouze n臎kolik mo啪nost铆 a tisk na n臎j ze s铆t臎\n"
+"je velmi pomal媒. Pokud s GNU/Linuxem teprve za膷铆n谩te, pak je \"pdq\"\n"
+"doporu膷en媒 tiskov媒 syst茅m pro v谩s.\n"
+"\n"
+" * \"%s\"'Common Unix Printing System' je vynikaj铆c铆 v tisku na lok谩ln铆\n"
+"tisk谩rny stejn臎 jako p艡i tisku na tisk谩rnu na druh茅 stran臎 planety. "
+"Nastaven铆\n"
+"je jednoduch茅 a m暖啪e fungovat jako klient i server pro klienty z \"lpd\"\n"
+"syst茅mu, tak啪e je s nimi kompatibiln铆. Je mo啪n茅 nastavit spoustu voleb,\n"
+"ale z谩kladn铆 nastaven铆 je velmi jednoduch茅. Pokud pot艡ebujete emulovat\n"
+"\"lpd\" server, sta膷铆 spustit d茅mona \"cups-lpd\". M谩 tak茅 grafick茅 "
+"prost艡ed铆\n"
+"pro tisk a nastaven铆 tisk谩rny.\n"
+"\n"
+"Pokud nyn铆 provedete volbu a pozd臎ji budete cht铆t tiskov媒 syst茅m zm臎nit,\n"
+"m暖啪ete to prov茅st pomoc铆 n谩stroje PrinterDrake z ovl谩dac铆ho centra Mandrake "
+"tak,\n"
+"啪e klepnete na tla膷铆tko Expert."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Tiskov媒 server"
+msgid "\"Menu\" key"
+msgstr "Kl谩vesa \"Menu\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Abyste mohli tisknout na NetWare tisk谩rn臎, mus铆te zadat n谩zev NetWare "
-"serveru (Pozor! To m暖啪e b媒t odli拧n茅 od jeho n谩zvu pro TCP/IP!), n谩zev "
-"tiskov茅 fronty tisk谩rny, kterou chcete pou啪铆vat, u啪ivatelsk茅 jm茅no a heslo."
+"\n"
+"\n"
+"Zkontrolujte pros铆m, zda PrinterDrake provedl automatickou detekci modelu "
+"spr谩vn臎. Pokud je vyzna膷en nespr谩vn媒 model, m暖啪ete ho zm臎nit v媒b臎rem ze "
+"seznamu nebo zvolte \"P艡铆m媒 tisk\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Mo啪nosti NetWare tisk谩rny"
+msgid "Security Administrator:"
+msgstr "Spr谩vce bezpe膷nosti:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Zadejte sv茅 p艡ihla拧ovac铆 jm茅no"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"pokud je nastaveno, kontrolu pr谩va soubor暖 v domovsk茅m adres谩艡i u啪ivatele"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"P艡ipojit tisk谩rnu k Linux serveru a nechat po膷铆ta膷(e) s Windows pracovat "
-"jako klienty.\n"
-"\n"
-"Chcete opravdu pokra膷ovat v nastaven铆 tisk谩rny t铆mto zp暖sobem?"
+"Nem谩te 啪谩dn茅 p艡ipojen铆 k Internetu.\n"
+"Vytvo艡te si jej klepnut铆m na 'Konfigurovat'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Kopie fontu"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automaticky"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Chcete si vyzkou拧et nastaven铆?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Nastavit na serveru s Windows tisk谩rnu, kter谩 bude p艡铆stupn谩 pomoc铆 IPP "
-"protokolu a nastavit tisk z tohoto po膷铆ta膷e pomoc铆 spojen铆 \"%s\" v aplikaci "
-"PrinterDrake.\n"
-"\n"
+"Tisk谩rna \"%s\" byla 煤sp臎拧n臎 odebr谩na z aplikace Star Office/OpenOffice.org/"
+"GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Prov谩d铆te nastaven铆 tisku s 煤膷tem na syst茅mu Windows. D铆ky chyb臎 v klientu "
-"protokolu Samba je heslo p艡i tisku posl谩no jako 膷ist媒 text z p艡铆kazov茅 "
-"艡谩dky. Je tud铆啪 mo啪n茅, aby kdokoliv vid臎l toto heslo na obrazovce kdy啪 si "
-"zad谩 p艡铆kaz nap艡. \"ps auxwww\".\n"
+"Standardn铆: B臎啪n茅 zabezpe膷en铆 doporu膷en茅 pro po膷铆ta膷, kter媒 bude p艡ipojen k "
+"s铆ti\n"
+" Internet jako klient.\n"
"\n"
-"Doporu膷ujeme pou啪铆vat jednu z n谩sleduj铆c铆ch alternativ (ve v拧ech p艡铆padech "
-"je dobr茅 m铆t nastaven p艡铆stup pouze z po膷铆ta膷暖 z lok谩ln铆 s铆t臎, respektive za "
-"firewallem):\n"
+"Vysok谩: Jsou ji啪 zavedena n臎kter谩 omezen铆 a ka啪dou noc je spu拧t臎no "
+"n臎kolik automatick媒ch kontrol.\n"
"\n"
-"Pou啪铆t 煤膷et, kter媒 nem谩 nastaven 啪谩dn茅 heslo, jako je \"GUEST\" nebo "
-"speci谩ln铆 煤膷et pouze pro 煤膷ely tisku. Neodstra艌ujte ochranu heslem z b臎啪n茅ho "
-"煤膷tu nebo dokonce z administr谩torsk茅ho 煤膷tu.\n"
+"Vy拧拧铆: 脷rove艌 zabezpe膷en铆 je nyn铆 dostate膷n臎 vysok谩, aby bylo mo啪n茅 "
+"pou啪铆t\n"
+" syst茅m jako server, kter媒 p艡ij铆m谩 po啪adavky od mnoha klient暖. "
+"Pokud je v谩拧\n"
+"\t po膷铆ta膷 p艡ipojen k Internetu jen jako klient, m臎li byste zvolit "
+"ni啪拧铆 煤rove艌.\n"
"\n"
-"Nastavte tisk谩rnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
-"Potom nastavte tisk na t茅to tisk谩rn臎 pomoc铆 typy spojen铆 \"%s\" v aplikaci "
-"PrinterDrake.\n"
+"Paranoidn铆: Podobn谩 p艡edchoz铆 煤rovni, ale syst茅m je zcela uzav艡en a 煤rove艌 "
+"zabezpe膷en铆\n"
+" je na sv茅m maximu.\n"
"\n"
+"Spr谩vce bezpe膷nosti:\n"
+" Pokud je zapnuta volba 'Bezpe膷nostn铆 varov谩n铆', budou "
+"bezpe膷nostn铆 varov谩n铆 zas铆l谩na tomuto u啪ivateli (u啪ivatelsk茅 jm茅no nebo\n"
+"\t email)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "BEZPE膶NOSTN脥 VAROV脕N脥!"
+msgid "Save packages selection"
+msgstr "Ulo啪it v媒b臎r jednotliv媒ch bal铆膷k暖"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Chyb铆 n谩zev pro sd铆len铆 p艡es Sambu!"
+msgid "Remove the last item"
+msgstr "Odstranit posledn铆 polo啪ku"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Mus铆 b媒t zad谩n bu膹 n谩zev serveru nebo jeho IP adresa!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Seznam u啪ivatel暖 pro obnoven铆 (od ka啪d茅ho bude obnovena pouze posledn铆 "
+"z谩loha)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Automaticky nalezeno"
+msgid "No net boot images created!"
+msgstr "Nepoda艡ilo se vytvo艡it obraz pro spou拧t臎n铆 ze s铆t臎!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Pracovn铆 skupina"
+msgid "use pptp"
+msgstr "pou啪铆t pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Sd铆len茅 jm茅no"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Zvolte si, kter茅 slu啪by by m臎li b媒t automaticky spu拧t臎ny p艡i startu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
+msgid "Learn how to use this printer"
+msgstr "N谩pov臎da pro tisk na t茅to tisk谩rn臎"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "N谩zev SMB serveru"
+msgid "Configure the network now"
+msgstr "Nastavit s铆钮 nyn铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Pokud byla po啪adovan谩 tisk谩rna automaticky nalezena, vyberte ji jednodu拧e "
-"ze seznamu a pokud je to pot艡eba, dopl艌te u啪ivatelsk茅 jm茅no, heslo, a "
-"pracovn铆 skupinu."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Zvolte si zrcadlo (mirror) pro stahov谩n铆 bal铆膷k暖"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Abyste mohli tisknout na SMB tisk谩rn臎, mus铆te zadat n谩zev SMB po膷铆ta膷e"
-"(Pozor! To m暖啪e b媒t odli拧n茅 od jeho TCP/IP n谩zvu) a mo啪n谩 i IP adresu "
-"tiskov茅ho serveru, n谩zev sd铆len茅 tisk谩rny, vhodn茅 u啪ivatelsk茅 jm茅no, heslo a "
-"informace o pracovn铆 skupin臎."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Mo啪nosti SMB (Windows 9x/NT) tisk谩rny"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Tisk谩rna \"%s\" na serveru \"%s\""
+"Zm臎nu velikost FAT nen铆 mo啪n茅 prov茅st, \n"
+"vyskytla se n谩sleduj铆c铆 chyba: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", tisk谩rna \"%s\" na serveru \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Na kter媒 sektor chcete odd铆l p艡esunout?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Chyb铆 n谩zev vzd谩len茅 tisk谩rny!"
+msgid "Do you want to click on this button?"
+msgstr "Chcete klepnout na toto tla膷铆tko? "
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Chyb铆 n谩zev vzd谩len茅ho po膷铆ta膷e!"
+msgid "Bahamas"
+msgstr "Bahamy"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "N谩zev vzd谩len茅 tisk谩rny"
+msgid "Manual configuration"
+msgstr "Ru膷n铆 nastaven铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "N谩zev vzd谩len茅ho po膷铆ta膷e"
+msgid "search"
+msgstr "vyhledat"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Abyste mohli pou啪铆vat vzd谩lenou tiskovou frontu lpd, mus铆te zadat n谩zev "
-"tiskov茅ho serveru a n谩zev tisk谩rny, kam m谩 b媒t pos铆l谩n tisk."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Mo啪nosti vzd谩len茅 lpd tisk谩rny"
+"Tento bal铆膷ek nahraje zvolenou mapu kl谩vesnice definovanou\n"
+"v /etc/sysconfig/keyboard. Tu lze vybrat pomoc铆 n谩stroje kbdconfig.\n"
+"Pro v臎t拧inu po膷铆ta膷暖 byste ji m臎li nechat zapnutou."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Ru膷n铆 nastaven铆"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instala膷n铆 ovlada膷 pro obrazovku)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Mus铆te vybrat/zadat tisk谩rnu/za艡铆zen铆!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "N谩zev po膷铆ta膷e pro Zeroconf nem暖啪e obsahovat \"te膷ku\""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Paraleln铆 porty: /dev/lp0, /dev/lp1,... je ekvivalentn铆 LPT1:, LPT2:, ...,"
-"prvn铆 USB tisk谩rna: /dev/usb/lp0, druh谩 USB tisk谩rna: /dev/usb/lp1,...)."
+"Syslog je program pomoc铆 n臎ho啪 zaznamen谩v谩 mnoho d茅mon暖 spr谩vy do "
+"syst茅mov媒ch\n"
+"log soubor暖. Je dobr茅 m铆t spu拧t臎n媒 syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Vyberte port, ke kter茅mu je va拧e tisk谩rna p艡ipojena."
+msgid "Unknown/Others"
+msgstr "Nezn谩m媒/Jin媒"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vyberte si port, ke kter茅mu je tisk谩rna p艡ipojena nebo zadejte do pol铆膷ka "
-"n谩zev za艡铆zen铆/n谩zev souboru"
+msgid "No TV Card detected!"
+msgstr "Nebyla nalezena TV karta!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Volby"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Vyberte tiskov媒 port, kam budou sm臎rov谩ny tiskov茅 煤lohy."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Tisk谩rna \"%s\" je nyn铆 nastavena jako v媒choz铆."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Vyberte si tisk谩rnu, kterou chcete nastavit. Konfigurace t臎chto tisk谩ren je "
-"pln臎 automatick谩. Pokud nebyla tisk谩rna spr谩vn臎 detekov谩na nebo preferujete "
-"vlastn铆 nastaven铆 tisku, zvolte \"Ru膷n铆 konfigurace\"."
+"Nyn铆 nastavujete laserovou tisk谩rnu OKI winprinter. Tyto tisk谩rny pou啪铆vaj铆 "
+"velmi specifick媒 komunika膷n铆 protokol a mohou pracovat pouze pokud jsou "
+"p艡ipojeny k prvn铆mu paraleln铆mu portu. Pokud je tisk谩rna p艡ipojena na jin媒 "
+"port, nebo se tiskne p艡es server, p艡ipojte tisk谩rnu na prvn铆 paraleln铆 port. "
+"Jinak tisk nebude pracovat. Typ p艡ipojen铆 bude ovlada膷 ignorovat."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Zde je seznam automaticky detekovan媒ch tisk谩ren. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Generace cpu (nap艡. 8 pro Pentium III, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Nyn铆 nen铆 povolena 啪谩dn谩 alternativa"
+msgid "Auto-detected"
+msgstr "Automaticky nalezeno"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Konfigurace t茅to tisk谩rny je pln臎 automatick谩. Pokud nebyla tisk谩rna spr谩vn臎 "
-"detekov谩na nebo preferujete vlastn铆 nastaven铆 tisku, zvolte \"Ru膷n铆 "
-"konfigurace\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Byla automaticky detekov谩na n谩sleduj铆c铆 tisk谩rna. "
+"V谩拧 po膷铆ta膷 bude nastaven jako instala膷n铆 PXE server se slu啪bou DHCP\n"
+"a TFTP serveru.\n"
+"Tato vlastnost umo啪艌uje instalovat dal拧铆 po膷铆ta膷e na lok谩ln铆 s铆ti pomoc铆\n"
+"po膷铆ta膷e.\n"
+"\n"
+"P艡ed pokra膷ov谩n铆m se ujist臎te, 啪e jste nastavili va拧i s铆钮 a p艡ipojen铆 k "
+"Internetu pomoc铆 aplikace drakconnect.\n"
+"\n"
+"Pozn.: Pro nastaven铆 lok谩ln铆 s铆t臎 (LAN) pot艡ebujete vyhrazen媒 s铆钮ov媒 adapt茅r."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Vyberte si tisk谩rnu, na kterou budou sm臎rov谩ny tiskov茅 煤lohy nebo zadejte do "
-"pol铆膷ka n谩zev za艡铆zen铆/n谩zev souboru"
+"Pro bootstrap nen铆 pot艡ebn茅 m铆sto o velikosti 1MB! Instalace m暖啪e pokra膷ovat "
+"ale pro spu拧t臎n铆 syst茅mu mus铆te vytvo艡it bootstrap odd铆l pomoc铆 DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12184,1080 +12152,784 @@ msgstr ""
"Vyberte si tisk谩rnu, kterou chcete nastavit nebo zadejte do pol铆膷ka n谩zev "
"za艡铆zen铆/n谩zev souboru"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Jako alternativu m暖啪ete zadat do pol铆膷ka n谩zev za艡铆zen铆/n谩zev souboru"
+msgid "Refuse"
+msgstr "Odm铆tnout"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Pokud nen铆 mezi nimi po啪adovan谩 tisk谩rna, zadejte do pol铆膷ka n谩zev za艡铆zen铆/"
-"n谩zev souboru"
+"HardDrake testuje hardware a umo啪艌uje nov媒/zm臎n臎n媒\n"
+"hardware nastavit"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Dostupn茅 tisk谩rny"
+msgid "Remote Printers"
+msgstr "Vzd谩len茅 tisk谩rny"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Nenalezena 啪谩dn谩 tisk谩rna!"
+msgid "Creating and formatting file %s"
+msgstr "Vytv谩艡铆m a form谩tuji soubor %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Mus铆te zadat za艡铆zen铆 nebo n谩zev souboru!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "pokud je nastaveno, prov谩d铆 se kontrola p艡idan茅/odebran茅 sgid soubory."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Lok谩ln铆 tisk谩rna nenalezena! Pro ru膷n铆 instalaci tisk谩rny zadejte n谩zev "
-"za艡铆zen铆/souboru do pol铆膷ka (Paraleln铆 porty: /dev/lp0, /dev/lp1,... jsou "
-"ekvivalentn铆 LPT1:, LPT2:, ...,prvn铆 USB tisk谩rna: /dev/usb/lp0, druh谩 USB "
-"tisk谩rna: /dev/usb/lp1,...)."
+"Tisk谩rna HP LaserJet 1000 pot艡ebuje po spu拧t臎n铆 nahr谩t firmware. St谩hn臎te si "
+"z webov媒ch str谩nek HP ovlada膷e pro Windows (firmware na dod谩van茅m CD s "
+"tisk谩rnou nefunguje) a vyextrahujte z nich pomoc铆 programu 'unzip' soubor "
+"'sihp1000.img'. Tento soubor nakop铆rujte do adres谩艡e '/etc/printer'. Skript "
+"pro automatick媒 upload potom tento soubor automaticky nahraje do tisk谩rny "
+"kdykoliv bude p艡ipojena a zapnuta.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "M铆stn铆 tisk谩rna"
+msgid "Choose an existing LVM to add to"
+msgstr "Zvolte existuj铆c铆 LVM pro p艡id谩n铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB tisk谩rna \\#%s"
+msgid "xfs restart"
+msgstr "restart xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Tisk谩rna na paraleln铆m portu \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Tisk谩rna s n谩zvem %s ji啪 existuje,\n"
+"chcete opravdu p艡epsat jej铆 konfiguraci?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Tisk谩rna \"%s\" na SMB/Windows serveru \"%s\""
+msgid "No partition available"
+msgstr "Nejsou dostupn茅 啪谩dn茅 diskov茅 odd铆ly"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "S铆钮ov谩 tisk谩rna \"%s\", port %s"
+msgid "Use the scanners on hosts: "
+msgstr "Pou啪铆t skenery na po膷铆ta膷i: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Nalezeno %s"
+msgid "Unselected All"
+msgstr "Zru拧it cel媒 v媒b臎r"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", tisk谩rna \"%s\" na SMB/Windows serveru \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Dekod茅r n谩zvu dom茅ny"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", s铆钮ov谩 tisk谩rna \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "艩ifrovac铆 kl铆膷 (znovu)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Blahop艡ejeme, tisk谩rna je instalov谩na a nastavena!\n"
-"\n"
-"Tisknout z aplikac铆 lze p艡铆kazem \"Tisk\" (oby膷ejn臎 v menu \"Soubor\").\n"
-"\n"
-"Pokud chcete p艡idat, odebrat, p艡ejmenovat tisk谩rnu nebo zm臎nit jej铆 v媒choz铆 "
-"hodnoty (typ z谩sobn铆ku, kvalita tisku,...), zvolte \"Tisk谩rna\" v sekci "
-"\"Hardware\" v ovl谩dac铆m centru Mandrake."
+msgid "Samba share name missing!"
+msgstr "Chyb铆 n谩zev pro sd铆len铆 p艡es Sambu!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Automaticky nal茅zt tisk谩rny sd铆len茅 po膷铆ta膷i s Microsoft Windows"
+msgid "True Type install done"
+msgstr "Instalace True Type font暖 je dokon膷ena"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Automaticky nal茅zt tisk谩rny p艡ipojen茅 p艡铆mo k lok谩ln铆 s铆ti"
+msgid "Detection in progress"
+msgstr "Prob铆h谩 detekce"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automaticky nal茅zt tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i"
+msgid "Build Whole Kernel -->"
+msgstr "Sestavit cel茅 j谩dro -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "V铆t谩 v谩s %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Vlo啪te pros铆m disketu s moduly do %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"N谩sleduj铆c铆 tisk谩rna\n"
"\n"
-"V铆tejte v Pr暖vodci nastaven铆m tisk谩rny\n"
-"\n"
-"Tento pr暖vodce v谩m pom暖啪e nainstalovat va拧i tisk谩rnu nebo tisk谩rny p艡ipojen茅 "
-"k tomuto po膷铆ta膷i.\n"
-"\n"
-"Pokud m谩te tisk谩rnu nebo tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i, zapojte je "
-"pros铆m a zapn臎te je; pak mohou b媒t automaticky nalezeny. \n"
-"\n"
-"Pokud jste p艡ipraveni, klepn臎te na tla膷铆tko \"D谩le\", nebo klepn臎te na "
-"tla膷铆tko \"Zru拧it\" pokud nechcete v tuto chv铆li tisk谩rnu(y) nastavovat."
+"%s %s\n"
+"je p艡铆mo p艡ipojena k va拧emu po膷铆ta膷i"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"V铆tejte v Pr暖vodci nastaven铆m tisk谩rny\n"
-"\n"
-"Tento pr暖vodce v谩m pom暖啪e nainstalovat va拧i tisk谩rnu nebo tisk谩rny p艡ipojen茅 "
-"k tomuto po膷铆ta膷i nebo p艡铆mo k s铆ti.\n"
-"\n"
-"Pokud m谩te tisk谩rnu nebo tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i, zapojte je "
-"pros铆m a zapn臎te je; pak mohou b媒t automaticky nalezeny. Va拧e s铆钮ov茅 "
-"tisk谩rny mus铆 b媒t rovn臎啪 zapnuty a p艡ipojen茅 k s铆ti, maj铆-li b媒t automaticky "
-"nalezeny.\n"
-"\n"
-"Automatick谩 detekce tisk谩ren p艡ipojen媒ch k s铆ti prob铆h谩 podstatn臎 d茅le ne啪 "
-"automatick谩 detekce tisk谩ren pouze lok谩ln臎 p艡ipojen媒ch k tomuto po膷铆ta膷i. "
-"Pokud nepot艡ebujete automatickou detekci tisk谩ren na s铆ti, pak tuto "
-"autodetekci vypn臎te.\n"
-"\n"
-"Pokud jste p艡ipraveni, klepn臎te na tla膷铆tko \"D谩le\", nebo klepn臎te na "
-"tla膷铆tko \"Zru拧it\" pokud nechcete v tuto chv铆li tisk谩rny nastavovat."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Tisk谩rny sd铆len茅 na po膷铆ta膷铆ch/s铆ti: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"V铆tejte v Pr暖vodci nastaven铆m tisk谩rny\n"
-"\n"
-"Tento pr暖vodce v谩m pom暖啪e nainstalovat va拧i tisk谩rnu nebo tisk谩rny p艡ipojen茅 "
-"k tomuto po膷铆ta膷i, p艡铆mo k s铆ti, nebo sd铆len茅 na po膷铆ta膷i s Windows.\n"
-"\n"
-"Pokud m谩te tisk谩rnu nebo tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i, zapojte je "
-"pros铆m a zapn臎te je; pak mohou b媒t automaticky nalezeny. Va拧e s铆钮ov茅 "
-"tisk谩rny nebo tisk谩rny sd铆len茅 po膷铆ta膷i s Windows mus铆 b媒t rovn臎啪 zapnuty a "
-"p艡ipojen茅 k s铆ti, maj铆-li b媒t automaticky nalezeny.\n"
-"\n"
-"Automatick谩 detekce tisk谩ren p艡ipojen媒ch k s铆ti prob铆h谩 podstatn臎 d茅le ne啪 "
-"automatick谩 detekce tisk谩ren pouze lok谩ln臎 p艡ipojen媒ch k tomuto po膷铆ta膷i. "
-"Pokud nepot艡ebujete automatickou detekci tisk谩ren na s铆ti, nebo tisk谩ren "
-"sd铆len媒ch po膷铆ta膷i s Windows, pak tuto autodetekci vypn臎te.\n"
-"\n"
-"Pokud jste p艡ipraveni, klepn臎te na tla膷铆tko \"D谩le\", nebo klepn臎te na "
-"tla膷铆tko \"Zru拧it\" pokud nechcete v tuto chv铆li tisk谩rny nastavovat."
+"P艡铆kaz \"%s\" dovoluje modifikovat volby pro ka啪dou tiskovou 煤lohu. "
+"Jednodu拧e zadejte pot艡ebn茅 nastaven铆 do p艡铆kazov茅 艡谩dky, nap艡. \"%s<soubor>"
+"\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"V铆tejte v pr暖vodci nastaven铆m tisku\n"
-"\n"
-"Tento pr暖vodce v谩m pom暖啪e nainstalovat lok谩ln铆 nebo vzd谩len茅 tisk谩rnu(y), "
-"kter茅 je mo啪n茅 n谩sledn臎 vyu啪铆t na vzd谩len茅m po膷铆ta膷i na s铆ti.\n"
-"\n"
-"Budete dot谩z谩ni na v拧echny pot艡ebn茅 informace pro nastaven铆 tisk谩rny, m暖啪ete "
-"si vybrat se v拧ech tiskov媒ch ovlada膷暖 a typ暖 p艡ipojen铆 tisk谩rny."
+"V n臎kter媒ch p艡铆padech pot艡ebuje ovlada膷 %s pro svoji spr谩vnou funkci dal拧铆\n"
+"informace, p艡esto啪e norm谩ln臎 funguje i bez nich. Cht臎li byste zadat\n"
+"n臎jak茅 dopl艌uj铆c铆 mo啪nosti, nebo rad臎ji nech谩te ovlada膷 samostatn臎 "
+"prozkoumat\n"
+"hardware va拧eho po膷铆ta膷e, aby z铆skal informace kter茅 pot艡ebuje? Zkoum谩n铆\n"
+"hardware m暖啪e ve v媒jime膷n媒ch p艡铆padech zp暖sobit zamrznut铆 po膷铆ta膷e, ale "
+"nem臎lo\n"
+"by v 啪谩dn茅m p艡铆pad臎 zp暖sobit jin茅 拧kody."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "CD nem谩 spr谩vn媒 n谩zev. Je ozna膷eno %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"V铆t谩 v谩s pr暖vodce nastaven铆m sd铆len铆 p艡ipojen铆 k Internetu!\n"
"\n"
+"%s\n"
"\n"
-"PrinterDrake nemohl zjistit, jak媒 model je va拧e tisk谩rna %s. Pros铆m vyberte "
-"si odpov铆daj铆c铆 model ze seznamu."
+"Klepn臎te na Konfigurovat, pokud chcete spustit pr暖vodce nastaven铆m."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " na "
+msgid "Searching for new printers..."
+msgstr "Vyhled谩v谩m nov茅 tisk谩rny..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Nastavuji tisk谩rnu ..."
+msgid " (multi-session)"
+msgstr " (multi-session)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Vyhled谩v谩m nov茅 tisk谩rny..."
+msgid "Kernel Boot Timeout"
+msgstr "Prodleva p艡i spu拧t臎n铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"POZN脕MKA: V z谩vislosti na modelu tisk谩rny a tiskov茅m syst茅mu je pot艡eba "
-"nainstalovat dal拧铆ch %d MB pot艡ebn茅ho software."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Opravdu chcete nastavit tisk na tomto po膷铆ta膷i?\n"
+"Va拧e karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
+"Pokud pou啪ijete XFree %s, m暖啪ete na druhou stranu dos谩hnout lep拧铆ch v媒sledk暖 "
+"ve 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Chcete povolit tisk na tisk谩rn谩ch vypsan媒ch v媒拧e?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Pr暖vodce DrakX na拧el n谩sleduj铆c铆 艡e拧en铆:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Chcete povolit tisk na tisk谩rn谩ch v lok谩ln铆 s铆ti?\n"
+msgid "Hungarian"
+msgstr "Ma膹arsk茅"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Chcete povolit tisk na tisk谩rn谩ch vypsan媒ch v媒拧e nebo na tisk谩rn谩ch v "
-"lok谩ln铆 s铆ti?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Zkontrolujte to, 啪e v拧echny tisk谩rny jsou p艡ipojeny a zapnuty).\n"
+"Vyberte si sv茅ho poskytovatele internetu.\n"
+" Pokud nen铆 na seznamu, vyberte si Jin媒"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Na va拧em po膷铆ta膷i nebyla nalezena 啪谩dn谩 p艡铆mo p艡ipojen谩 tisk谩rna"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatick谩 synchronizace 膷asu (pomoc铆 NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Na拧el jsem %d nezn谩m媒ch tisk谩ren p艡铆mo p艡ipojen媒ch k va拧emu po膷铆ta膷i"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Na拧el jsem jednu nezn谩mou tisk谩rnu p艡铆mo p艡ipojenou k va拧emu po膷铆ta膷i"
+msgid "LDAP Server"
+msgstr "LDAP server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"N谩sleduj铆c铆 tisk谩rna\n"
-"\n"
-"%s %s\n"
-"je p艡铆mo p艡ipojena k va拧emu po膷铆ta膷i"
+"Podpora PCMCIA v臎t拧inou znamen谩 podporu za艡铆zen铆 jako s铆钮ov茅 karty a\n"
+"modemy v laptopech. Nespust铆 se pokud ji p艡铆mo nenastav铆te, ale nen铆 "
+"probl茅m\n"
+"j铆 m铆t nainstalovanou i na po膷铆ta膷铆ch, kter茅 ji nepot艡ebuj铆."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"N谩sleduj铆c铆 tisk谩rny\n"
-"\n"
-"%s %s\n"
-"jsou p艡铆mo p艡ipojeny k va拧emu po膷铆ta膷i"
+msgid "Choose your country"
+msgstr "V媒b臎r si zemi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"N谩sleduj铆c铆 tisk谩rny\n"
"\n"
-"%s %s\n"
-"jsou p艡铆mo p艡ipojeny k va拧emu po膷铆ta膷i"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "a %d nezn谩m媒ch tisk谩ren"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "a jedna nezn谩m谩 tisk谩rna"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Zkoum谩m v谩拧 po膷铆ta膷..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Restartuji CUPS..."
+"- Syst茅mov茅 soubory:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Tento server je ji啪 na seznamu, nelze jej tedy op臎t p艡idat.\n"
+msgid "Standalone Tools"
+msgstr "Samostatn茅 n谩stroje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "P艡铆klady spr谩vn媒ch IP adres:\n"
+msgid "Where"
+msgstr "Kde"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Zadan谩 IP adresa nen铆 spr谩vn谩.\n"
+msgid "but not matching"
+msgstr "neshodn媒ch"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Chybn谩 IP adresa serveru!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Zde si pro va拧i zvukovou (%s) kartu m暖啪ete vybrat alternativn铆 ovlada膷 (bu膹 "
+"OSS nebo ALSA)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Pokud nen铆 zad谩n 啪谩dn媒 port, bude jako v媒choz铆 pou啪it port 631."
+msgid "Configuring PCMCIA cards..."
+msgstr "Nastavuji PCMCIA karty..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Zadejte IP adresu a port po膷铆ta膷e, ze kter茅ho budete cht铆t vyu啪铆vat tisk谩rny."
+msgid "kdesu missing"
+msgstr "chyb铆 kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "P艡铆stup k tisk谩rn谩m na vzd谩len茅m CUPS serveru"
+msgid "Encryption key"
+msgstr "艩ifrovac铆 kl铆膷"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Odstranit vybran媒 server"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Upravit vybran媒 server"
+msgid "Christmas Island"
+msgstr "V谩no膷n铆 ostrov"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "P艡idat server"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Instalace zav谩d臎c铆ho programu neusp臎la. Stala se tato chyba:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"P艡idejte sem ty CUPS servery, ze kter媒ch budete cht铆t vyu啪铆vat tisk谩rny. Je "
-"to nutn茅 pouze v p艡铆pad臎, 啪e tyto servery ne拧铆艡铆 informace informace o "
-"tisk谩rn谩ch v lok谩ln铆 s铆ti."
+msgid "EIDE/SCSI channel"
+msgstr "Kan谩l EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP adresa po膷铆ta膷e/s铆t臎:"
+msgid "Set this printer as the default"
+msgstr "Nastavit tuto tisk谩rnu jako v媒choz铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Tento po膷铆ta膷/s铆钮 je ji啪 na seznamu, nelze jej znova p艡idat.\n"
+msgid "partition %s"
+msgstr "diskov茅m odd铆lu %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Zadan谩 IP adresa pro po膷铆ta膷 nebo s铆钮 nen铆 spr谩vn谩.\n"
+msgid "Paranoid"
+msgstr "Paranoidn铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Chyb铆 IP adresa po膷铆ta膷e/s铆t臎."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Vyberte s铆钮 nebo po膷铆ta膷, na kter茅m budou lok谩ln铆 tisk谩rny dostupn茅:"
+msgid "<-- Del User"
+msgstr "<-- Odebrat u啪ivatele"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Sd铆len铆 lok谩ln铆ch tisk谩ren"
+msgid "Location on the bus"
+msgstr "Um铆st臎n铆 na sb臎rnici"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Odstranit vybran媒 po膷铆ta膷/s铆钮"
+msgid "No printer found!"
+msgstr "Nenalezena 啪谩dn谩 tisk谩rna!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Upravit vybran媒 po膷铆ta膷/s铆钮"
+msgid "the vendor name of the device"
+msgstr "jm茅no dodavatele za艡铆zen铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "P艡idat po膷铆ta膷/s铆钮"
+msgid "Erase entire disk"
+msgstr "Smazat cel媒 disk"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Zde jsou po膷铆ta膷e a s铆t臎, na kter媒ch budou dostupn茅 lok谩ln铆 tisk谩rna(y):"
+msgid " (Default)"
+msgstr " (V媒choz铆)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Pokud je tato volba zvolena, pak je p艡i ka啪d茅m startu CUPS d茅mona "
-"automaticky zaji拧t臎no 啪e\n"
-"\n"
-"- pokud je nainstalov谩n LPD/LPRng, nebude CUPS p艡episovat /etc/printcap\n"
-"\n"
-"- pokud chyb铆 soubor /etc/cups/cupsd.conf, tak bude vytvo艡en\n"
-"\n"
-"- pokud jsou rozes铆l谩ny informace do s铆t臎, nebudou obsahovat v n谩zvu serveru "
-"\"localhost\".\n"
+"Argumenty: ()\n"
"\n"
-"Pokud n臎kter谩 volba zp暖sobuje probl茅my, vypn臎te tuto volbu, ale potom si na "
-"tyto zm铆n臎n茅 body mus铆te d谩vat pozor."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatick谩 korekce nastaven铆 pro CUPS"
+"Pokud je SERVER_LEVEL (nebo SECURE_LEVEL chyb铆) v souboru\n"
+"/etc/security/msec/security.conf v臎t拧铆 ne啪 3, vytvo艡铆 je symbolick媒 odkaz\n"
+"/etc/security/msec/server na /etc/security/msec/server.<SERVER_LEVEL>.\n"
+"/etc/security/msec/server je pou啪it programem chkconfig --add pro p艡id谩n铆\n"
+"slu啪by b臎hem instalace bal铆膷k暖."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Tato volba dovoluje tisk textov媒ch soubor暖 v japon拧tin臎. Pou啪ijte tuto "
-"funkci pouze pokud opravdu pot艡ebujete tisknout v japon拧tin臎, pokud je "
-"zvolena, nelze u啪 tisknout n谩rodn铆 znaky v latince a nelze nastavovat "
-"okraje, velikost font暖, atd. Toto nastaven铆 se t媒k谩 pouze tisk谩ren "
-"definovan媒ch na tomto po膷铆ta膷i. Pokud chcete tisknout japonsk茅 texty na "
-"vzd谩len茅 tisk谩rn臎, mus铆te tuto funkci aktivovat na vzd谩len茅m po膷铆ta膷i."
+msgid "Automatic reconfiguration"
+msgstr "Automatick茅 p艡enastaven铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Tiskov媒 re啪im pro japonsk媒 text"
+msgid "Receiving Speed:"
+msgstr "Rychlost na p艡铆jmu:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Pro z铆sk谩n铆 p艡铆stupu na vzd谩len茅 CUPS servery v lok谩ln铆 s铆ti pot艡ebujete "
-"pouze povolit volbu \"Automaticky nal茅zt dostupn茅 tisk谩rny na vzd谩len媒ch "
-"po膷铆ta膷铆ch\". CUPS server n谩sledn臎 informuje o t臎chto tisk谩rn谩ch. V拧echny "
-"zn谩m茅 tisk谩rny potom budou vyps谩ny v sekci \"Vzd谩len茅 tisk谩rny\" v hlavn铆m "
-"okn臎 aplikace PrinterDrake. Pokud CUPS server(y) nejsou ve va拧铆 lok谩ln铆 "
-"s铆ti, mus铆te zadat IP adresu a voliteln臎 tak茅 膷铆slo portu, aby bylo mo啪n茅 "
-"uveden茅 informace ze server暖 z铆skat."
+msgid "Turks and Caicos Islands"
+msgstr "Turks a Caicos Islands"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "沤谩dn茅"
+msgid "permissions"
+msgstr "opr谩vn臎n铆"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Dal拧铆 CUPS servery: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Nejsou 啪谩dn茅 vzd谩len茅 po膷铆ta膷e"
+msgid "<- Previous"
+msgstr "<- Zp臎t"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Vlastn铆 nastaven铆"
+msgid "Internet Connection Sharing configuration"
+msgstr "Nastaven铆 sd铆len铆 p艡ipojen铆 k Internetu"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Tisk谩rny sd铆len茅 na po膷铆ta膷铆ch/s铆ti: "
+msgid "Toggle between flat and group sorted"
+msgstr "P艡epnut铆 mezi abecedn铆m a skupinov媒m 艡azen铆m"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automaticky nal茅zt dostupn茅 tisk谩rny na vzd谩len媒ch po膷铆ta膷铆ch"
+msgid "Themes"
+msgstr "T茅mata"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Tisk谩rny na tomto po膷铆ta膷i jsou p艡铆stupn茅 jin媒m vzd谩len媒m po膷铆ta膷暖m"
+msgid "Options: %s"
+msgstr "Volby: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"M暖啪ete se rozhodnout, zda v拧echny tisk谩rny na vzd谩len媒ch po膷铆ta膷铆ch budou "
-"dostupn茅 i na tomto po膷铆ta膷i"
+"Jako spr谩vce zav谩d臎n铆 nyn铆 pou啪铆v谩te %s.\n"
+"Pokud chcete spustit pr暖vodce nastaven铆m, klepn臎te na Nastavit."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Zde m暖啪ete rozhodnout, zda tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i budou "
-"vzd谩len臎 p艡铆stupn茅 a z kter媒ch vzd谩len媒ch po膷铆ta膷暖."
+msgid "OKI winprinter configuration"
+msgstr "Nastaven铆 pro OKI win-tisk谩rnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Nastaven铆 tisk谩ren p艡es CUPS"
+msgid "Saint Helena"
+msgstr "Svat谩 Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Autodetekce tisk谩rny (lok谩ln铆, TCP/soket, a tisk谩rny SMB)"
+msgid "Security Level"
+msgstr "脷rove艌 zabezpe膷en铆"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"N臎kter茅 kroky nebyly dokon膷eny.\n"
"\n"
-"V p艡铆pad臎 vzd谩len茅ho CUPS serveru nemus铆te nastavovat tisk谩rny zde,\n"
-"tisk谩rny budou automaticky detekov谩ny."
+"Chcete opravdu nyn铆 skon膷it?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Jak je tisk谩rna p艡ipojena?"
+msgid "Sudan"
+msgstr "S煤d谩n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Zvolte p艡ipojen铆 tisk谩rny"
+msgid "Polish (qwertz layout)"
+msgstr "Polsk茅 (rozlo啪en铆 QWERTZ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Tisk谩rna HP LaserJet 1000 pot艡ebuje po spu拧t臎n铆 nahr谩t firmware. St谩hn臎te si "
-"z webov媒ch str谩nek HP ovlada膷e pro Windows (firmware na dod谩van茅m CD s "
-"tisk谩rnou nefunguje) a vyextrahujte z nich pomoc铆 programu 'unzip' soubor "
-"'sihp1000.img'. Tento soubor nakop铆rujte do adres谩艡e '/etc/printer'. Skript "
-"pro automatick媒 upload potom tento soubor automaticky nahraje do tisk谩rny "
-"kdykoliv bude p艡ipojena a zapnuta.\n"
+msgid "Syria"
+msgstr "S媒rie"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumenty: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Nastavte u啪ivatelskou masku."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumenty: (val)\n"
-"\n"
-"Nastav铆 膷as vypr拧en铆 pro shell. Nulov谩 hodnota znamen谩 啪谩dn媒 膷as."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Vita Vas %s, program pro start operacniho systemu!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumenty: (velikost)\n"
+"Vyberte si ze seznamu operacnich systemu nize nebo\n"
+"pockejte %d vterin pro automaticky start.\n"
"\n"
-"Nastav铆 velikost historie pro p艡铆kazy. Hodnota -1 znamen谩 neomezen谩."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "pokud je nastaveno, prov谩d铆 se kontrola p艡idan茅/odebran茅 sgid soubory."
+msgid "Portuguese"
+msgstr "Portugalsk茅"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "pokud je nastaveno, prov谩d铆 se kontrola na otev艡en茅 porty."
+msgid "Loopback file name: "
+msgstr "N谩zev souboru loopbacku:"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"pokud je nastaveno, odes铆l谩 report na dan媒 email nebo p艡铆mo u啪ivateli root"
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Adresa serveru DNS by m臎la b媒t ve tvaru 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "pokud je nastaveno, odes铆l谩 v媒sledek kontroly mailem."
+msgid "Serbia"
+msgstr "Srbsko"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"pokud je nastaveno, kontroluje, kter茅 soubory/adres谩艡e jsou zapisovateln茅 "
-"pro v拧echny."
+msgid "Newzealand"
+msgstr "Nov媒 Z茅land"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "pokud je nastaveno, pos铆l谩 v媒sledek kontroly na tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Tento adres谩艡 mus铆 krom臎 ko艡enov茅ho souborov茅ho syst茅mu z暖stat"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "pokud je nastaveno, spou拧t铆 kontrolu rpm datab谩ze."
+msgid "CapsLock key"
+msgstr "Kl谩vesa CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"pokud je nastaveno, kontroluje, zda je s铆钮ov茅 rozhran铆 v promiskuitn铆m re啪imu"
+msgid "Install bootloader"
+msgstr "Zav谩d臎c铆 program"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "pokud je nastaveno, prov谩d铆 kontrolu na chkrootkit."
+msgid "Select the memory size of your graphics card"
+msgstr "Kolik pam臎ti je na va拧铆 grafick茅 kart臎 ?"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"pokud je nastaveno, kontrolu pr谩va soubor暖 v domovsk茅m adres谩艡i u啪ivatele"
+"[VOLBY]\n"
+"S铆钮 & p艡ipojen铆 k Internetu a monitorov谩n铆 aplikac铆\n"
+"\n"
+"--defaultintf interface: zobraz铆 v啪dy toto rozhran铆\n"
+"--connect : pokud nen铆 p艡ipojeno, provede p艡ipojen铆 k internetu\n"
+"--disconnect : pokud je p艡ipojeno, provede odpojen铆 od internetu\n"
+"--force : pou啪铆v谩 se s (p艡i)odpojen铆m : vynut铆 (p艡i)odpojen铆.\n"
+"--status : vr谩t铆 1 pokud je p艡ipojeno, jinak vrac铆 0 a skon膷铆.\n"
+"--quiet : tich媒 re啪im. Pou啪铆v谩 se p艡i (p艡i)odpojov谩n铆."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"pokud je nastaveno, kontroluje p艡id谩v谩n铆/odeb铆r谩n铆 soubor暖 se suid root."
+msgid "Dynamic IP Address Pool:"
+msgstr "Dynamick媒 rozsah IP adres:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "pokud je nastaveno, pos铆l谩 v媒stup kontroly do syslogu."
+msgid "LVM name?"
+msgstr "N谩zev pro LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"pokud je nastaveno, kontroluje heslo, zda nen铆 pr谩zdn茅 heslo v /etc/shadow a "
-"u啪ivatele, kte艡铆 maj铆 id 0 jin铆 ne啪 u啪ivatel root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "N臎kter谩 za艡铆zen铆 v t艡铆d臎 hardware \"%s\" byla odstran臎na:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "pokud je nastaveno, spou拧t铆 ka啪d媒 den bezpe膷nostn铆 kontrolu."
+msgid "Found %s %s interfaces"
+msgstr "Na拧el jsem %s %s rozhran铆"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "pokud je nastaveno, ov臎艡uje kontroln铆 sou膷et pro suid/sgid soubory."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "pokud je nastaveno, kontroluje pr谩zdn谩 hesla v /etc/shadow."
+msgid "Post Install"
+msgstr "Poinstala膷n铆 nastaven铆"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "pokud je nastaveno, vypisuje soubory bez vlastn铆ka."
+msgid "The internal domain name"
+msgstr "Intern铆 n谩zev dom茅ny"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumenty: (umask)\n"
-"\n"
-"Nastavuje umask pro u啪ivatele root."
+msgid "Card IRQ"
+msgstr "IRQ karty"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Argumenty: (d茅lka, ndigits=0, nupper=0)\n"
+"Argumenty: (umask)\n"
"\n"
-"Nastav铆 minim谩ln铆 d茅lku hesla, minim谩ln铆 po膷et 膷铆slic a velk媒ch p铆smen v "
-"hesle."
+"Nastavte u啪ivatelskou masku."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Nastavuje d茅lku historie pro pou啪it谩 hesla."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumenty: (max, inactive=-1)\n"
-"\n"
-"Nastav铆 dobu platnosti hesla na \\fImax\\fP dn暖 a prodlevu mezi zm臎nami na "
-"\\fIinactive\\fP."
+"Import font暖 a monitoring aplikac铆\n"
+"--windows_import : provede import ze v拧ech dostupn媒ch odd铆l暖 s Windows.\n"
+"--xls_fonts : zobraz铆 v拧echny fonty, kter茅 ji啪 z xls existuj铆\n"
+"--strong : siln谩 verifikace font暖.\n"
+"--install : akceptuje libovoln媒 font z libovoln茅ho adres谩艡e.\n"
+"--uninstall : odinstaluje libovoln媒 font nebo libovoln媒 adres谩艡 s "
+"fonty.\n"
+"--replace : nahrad铆 ji啪 existuj铆c铆 fonty\n"
+"--application : 0 啪谩dn谩 aplikace.\n"
+" : 1 v拧echny dostupn茅 podporovan茅 aplikace.\n"
+" : nazev_aplikace jako nap艡. so pro staroffice \n"
+" : a gs pro ghostscript."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumenty: (jm茅no)\n"
-"\n"
-"P艡id谩 jm茅no k v媒jimk谩m, kter茅 se nekontroluj铆 na dobu platnosti pomoc铆 msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/Zak谩啪e sulogin(8) v jednou啪ivatelsk茅m re啪imu."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Zvolte mechaniku, kde chcete vytvo艡it startovac铆 disketu"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" Povol铆/Zak谩啪e prov谩d臎n铆 denn铆ch bezpe膷nostn铆ch kontrol."
+msgid "LILO with text menu"
+msgstr "LILO s textovou nab铆dkou"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" Povol铆/Zak谩啪e kontrolu na nastaven铆 promiskuitn铆ho re啪imu s铆钮ov茅ho rozhran铆."
+msgid "Everything (no firewall)"
+msgstr "V拧echno (bez firewallu)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Pou啪ije heslo pro autentizaci u啪ivatel暖."
+msgid "You must specify a kernel image"
+msgstr "Mus铆te zadat soubor s j谩drem"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povoluje su pouze 膷len暖m skupiny wheel nebo povoluje su ka啪d茅mu u啪ivateli."
+msgid ", multi-function device on USB"
+msgstr ", multifunk膷n铆 za艡铆zen铆 na USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" Povol铆/Zak谩啪e bezpe膷nostn铆 kontrolu pravideln臎 ka啪dou hodinu."
+msgid "Do"
+msgstr "Prov茅st"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" Povol铆/Zak谩啪e zaznamen谩v谩n铆 podivn媒ch IPv4 paket暖."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Stahuji ze zrcadla(mirror) seznam dostupn媒ch bal铆膷k暖"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-" Povol铆/Zak谩啪e pou啪it铆 knihovny libsafe, pokud je na syst茅mu nalezena."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litevsk茅 AZERTY (star谩)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumenty: (arg, alert=1)\n"
-"\n"
-"Povol铆/Zak谩啪e ochranu p艡ed IP spoofing."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilsk茅 (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumenty: (arg, alert=1)\n"
-"\n"
-"Povol铆/Zak谩啪e ochranu p艡ed spoofingem jmenn媒ch slu啪eb. Pokud\n"
-"je \\fIalert\\fP nastaveno, vyp铆拧e report do syslogu."
+msgid "IP address of host/network:"
+msgstr "IP adresa po膷铆ta膷e/s铆t臎:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumenty: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Povol铆/zak谩啪e v媒pis syslog hl谩拧ek na konzoli 12. V媒raz \\fIexpr\\fP\n"
-"ur膷uje, co se bude logovat (v铆ce detail暖 najdete v n谩pov臎d臎 syslog.conf(5))\n"
-"a dev ur膷uje na kter茅 za艡铆zen铆 se bude log pos铆lat."
+"um铆st臎n铆 y sou艡adnice pro\n"
+"lev媒 horn铆 roh li拧ty s pr暖b臎hem"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/zak谩啪e p艡铆kaz crontab a at pro u啪ivatele. Vyjmenovan铆 u啪ivatel茅 se\n"
-"zap铆拧ou do /etc/cron.allow a /etc/at.allow\n"
-"(v铆ce man at(1) a crontab(1))."
+msgid "System installation"
+msgstr "Instalace syst茅mu"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumenty: ()\n"
-"\n"
-"Pokud je SERVER_LEVEL (nebo SECURE_LEVEL chyb铆) v souboru\n"
-"/etc/security/msec/security.conf v臎t拧铆 ne啪 3, vytvo艡铆 je symbolick媒 odkaz\n"
-"/etc/security/msec/server na /etc/security/msec/server.<SERVER_LEVEL>.\n"
-"/etc/security/msec/server je pou啪it programem chkconfig --add pro p艡id谩n铆\n"
-"slu啪by b臎hem instalace bal铆膷k暖."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent a Grenadiny"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Autorizuje v拧echny slu啪by kontrolovan茅 tcp_wrappers (v铆ce hosts.deny(5)) "
-"pokud je nastaveno \\fIarg\\fP = ALL. Autorizuje\n"
-"pouze lok谩ln铆, pokud je nastaveno \\fIarg\\fP = LOCAL a nic pokud je\n"
-"nastaveno \\fIarg\\fP = NONE. V铆ce najdete v man hosts.allow(5)."
+msgid "/File/_Open"
+msgstr "/Soubor/_Otev艡铆t"
#: ../../security/help.pm:1
#, c-format
@@ -13272,1081 +12944,761 @@ msgstr ""
"Argument ud谩v谩, zda je klient opr谩vn臎n se p艡ipojit k X serveru\n"
"na tcp port 6000 nebo ne."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumenty: (arg, listen_tcp=None)\n"
-"\n"
-"Povol铆/Zak谩啪e spojen铆 na X server. Prvn铆 argument ud谩v谩, co se provede\n"
-"na stran臎 klienta. ALL (v拧echna spojen铆 jsou povolena), LOCAL (pouze "
-"lok谩ln铆\n"
-"spojen铆 je povoleno) a NONE (nen铆 povoleno 啪谩dn茅 spojen铆)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/Zak谩啪e v媒pis u啪ivatel暖 ve spr谩vc铆ch p艡ihl谩拧en铆 (kdm nebo gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/Zak谩啪e p艡铆m茅 p艡ihl谩拧en铆 u啪ivatele root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/Zak谩啪e vzd谩len茅 p艡ihl谩拧en铆 u啪ivatele root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/Zak谩啪e reboot s konsole proveden茅 u啪ivatelem."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Pokud je nastaven \\fIarg\\fP = ALL je povolena existence soubor /etc/issue\n"
-"a /etc/issue.net. Pokud je nastaven \\fP = NONE nen铆 povolen 啪谩dn媒\n"
-"soubor /etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "Um铆st臎n铆 souboru auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Povol铆/Zak谩啪e automatick茅 p艡ihl谩拧en铆."
+msgid "Open Firmware Delay"
+msgstr "Prodleva pro firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Akceptuje/Odm铆tne icmp echo."
+msgid "Hungary"
+msgstr "Ma膹arsko"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Akceptuje/Odm铆tne v拧esm臎rov茅 icmp echo."
+msgid "Total progess"
+msgstr "Celkov媒 pr暖b臎h"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumenty: (arg)\n"
-"\n"
-"Akceptuje/odm铆tne nekorektn铆 chybov茅 IPv4 zpr谩vy."
+msgid "Color configuration"
+msgstr "Nastaven铆 barev"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administr谩tor bezpe膷nosti (p艡ihla拧ovac铆 jm茅no nebo email)"
+msgid "New Zealand"
+msgstr "Nov媒 Z茅land"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Knihovna, kter茅 zabra艌uje 煤tok暖m proti p艡ete膷en铆 bufferu nebo proti 拧patn茅mu "
-"form谩tov谩n铆 艡et臎zc暖."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Pou啪铆t libsafe pro servery"
+"Existuj铆 zde n臎kter谩 omezen铆 a ka啪dou noc jsou spu拧t臎ny automatick茅 testy."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security level"
-msgstr "脷rove艌 zabezpe膷en铆"
+msgid "please choose the date to restore"
+msgstr "Vyberte datum obnoven铆 z谩lohy"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Vyberte pros铆m po啪adovanou 煤rove艌 zabezpe膷en铆"
+msgid "Switching from ext2 to ext3"
+msgstr "P艡ep铆n谩m z ext2 na ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Z谩kladn铆 volby programu DrakSec"
+msgid "LPRng"
+msgstr "LprNG"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Tato 煤rove艌 m谩 vlastnosti p艡edchoz铆 煤rovn臎, ale syst茅m je 煤pln臎 uzav艡en.\n"
-"Zabezpe膷en铆 je nastaveno na maximum."
+msgid "Netherlands Antilles"
+msgstr "Nizozemsk茅 Antily"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"S touto bezpe膷nostn铆 煤rovn铆 je mo啪n茅 pou啪铆vat syst茅m jako server.\n"
-"Bezpe膷nost je nyn铆 dostate膷n臎 vysok谩, aby bylo mo啪n茅 pou啪铆vat syst茅m jako "
-"server, ke kter茅mu\n"
-"je mo啪n茅 p艡ipojit mnoho klient暖. Pozn谩mka: pokud je po膷铆ta膷 pou啪铆v谩n pouze "
-"jako klient pro p艡ipojen铆 k Internetu, je lep拧铆 zvolit ni啪拧铆 煤rove艌."
+msgid "Browse to new restore repository."
+msgstr "Proch谩zet nov臎 obnoven媒 adres谩艡."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Existuj铆 zde n臎kter谩 omezen铆 a ka啪dou noc jsou spu拧t臎ny automatick茅 testy."
+"\n"
+"V铆tejte v pr暖vodci nastaven铆m tisku\n"
+"\n"
+"Tento pr暖vodce v谩m pom暖啪e nainstalovat lok谩ln铆 nebo vzd谩len茅 tisk谩rnu(y), "
+"kter茅 je mo啪n茅 n谩sledn臎 vyu啪铆t na vzd谩len茅m po膷铆ta膷i na s铆ti.\n"
+"\n"
+"Budete dot谩z谩ni na v拧echny pot艡ebn茅 informace pro nastaven铆 tisk谩rny, m暖啪ete "
+"si vybrat se v拧ech tiskov媒ch ovlada膷暖 a typ暖 p艡ipojen铆 tisk谩rny."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je standardn铆 煤rove艌 zabezpe膷en铆 pro po膷铆ta膷, kter媒 je pou啪铆v谩n jako "
-"klient pro p艡ipojen铆 k internetu."
+msgid "and %d unknown printers"
+msgstr "a %d nezn谩m媒ch tisk谩ren"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Hesla jsou nyn铆 aktivn铆, ale st谩le nedoporu膷uji pou啪铆t tento po膷铆ta膷 na s铆ti."
+"Prvn铆 verze procesor暖 Pentium m臎ly z v媒roby chybu v jednotce pro plovouc铆 "
+"艡谩dovou 膷谩rku, kter谩 nedosahovala po啪adovan茅 p艡esnosti p艡i operaci FDIV"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Tato 煤rove艌 mus铆 b媒t pou啪ita s rozmyslem. Sice m暖啪ete snadn臎ji pou啪铆vat "
-"sv暖j\n"
-"syst茅m, ale na druhou stranu je velmi citliv媒: Nesm铆 b媒t pou啪it pro\n"
-"po膷铆ta膷 p艡ipojen媒 k Internetu. Pro p艡ihl谩拧en铆 nen铆 zapot艡eb铆 啪谩dn茅 heslo."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoidn铆"
+"Nena拧el jsem 啪谩dnou ISDN PCI kartu. Pros铆m zvolte si jednu z n谩sleduj铆c铆 "
+"nab铆dky"
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Vysok谩"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Vy拧拧铆"
+msgid "Please give a user name"
+msgstr "Pros铆m zadejte u啪ivatelsk茅 jm茅no"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Slab谩"
+msgid "Enable CD Boot?"
+msgstr "Povolit spu拧t臎n铆 z CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Dve艡e doko艡谩n"
+msgid " enter `void' for void entry"
+msgstr " zadejte `void` pokud chcete pr谩zdn媒 vstup"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pro aktivaci zm臎n se pros铆m znovu p艡ihlaste na %s"
+msgid "on Hard Drive"
+msgstr "na pevn媒 disk"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Pros铆m odhlaste se a pak stiskn臎te Ctrl-Alt-Backspace"
+msgid "Winmodem connection"
+msgstr "P艡ipojen铆 p艡es winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow a /etc/hosts.deny jsou ji啪 nastaveny - beze zm臎n"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"Blahop艡ejeme, tisk谩rna je instalov谩na a nastavena!\n"
+"\n"
+"Tisknout z aplikac铆 lze p艡铆kazem \"Tisk\" (oby膷ejn臎 v menu \"Soubor\").\n"
+"\n"
+"Pokud chcete p艡idat, odebrat, p艡ejmenovat tisk谩rnu nebo zm臎nit jej铆 v媒choz铆 "
+"hodnoty (typ z谩sobn铆ku, kvalita tisku,...), zvolte \"Tisk谩rna\" v sekci "
+"\"Hardware\" v ovl谩dac铆m centru Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Je nutn茅 nejprve vytvo艡it soubor /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Nastavuje d茅lku historie pro pou啪it谩 hesla."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "N臎co neprob臎hlo spr谩vn臎! - Je nainstalovan媒 program mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nyn铆 m暖啪ete spustit aplikaci XawTV (pod X Windows!)\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "ISO image pro Etherboot je %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nen铆 dostatek odkl谩dac铆ho prostoru k instalaci, pros铆m p艡idejte n臎jak媒"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Nen铆 dostupn谩 啪谩dn谩 disketov谩 mechanika!"
+msgid "%s on %s"
+msgstr "%s na %s"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Disketu nyn铆 m暖啪ete vyjmout"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux spravuje 膷as podle GMT (Greenwich Mean Time) a p艡ev谩d铆 ho na\n"
+"膷as podle p艡铆slu拧n茅 vybran茅 膷asov茅 z贸ny. Toto je mo啪n茅 zru拧it odzna膷en铆m\n"
+"volby \"Hodiny nastaveny na GMT\" a tak budou syst茅mov茅 hodiny stejn茅 jako\n"
+"hardwarov茅. To je u啪ite膷n茅 v p艡铆pad臎, 啪e je na po膷铆ta膷i jin媒 opera膷n铆 "
+"syst茅m\n"
+"typu Windows.\n"
+"\n"
+"Volba \"Automatick谩 synchronizace 膷asu\" prov谩d铆 automatick茅 nastaven铆 "
+"hodin\n"
+"pomoc铆 p艡ipojen铆 k 膷asov茅mu serveru na Internetu. Vyberte si v seznamu ten "
+"server,\n"
+"kter媒 je v谩m nejbl铆啪. Je samoz艡ejm茅, 啪e pro spr谩vnou funkci mus铆te m铆t "
+"funk膷n铆\n"
+"p艡ipojen铆 k Internetu. Na po膷铆ta膷 se tak茅 nainstaluje 膷asov媒 server, kter媒\n"
+"mohou voliteln臎 pou啪铆vat jin茅 po膷铆ta膷e ve va拧铆 lok谩ln铆 s铆ti."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Nelze pracovat s disketou!"
+msgid "Which is your timezone?"
+msgstr "Jak茅 je va拧e 膷asov茅 p谩smo?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Pros铆m vlo啪te disketu:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Zapsat nastaven铆"
+msgid "The system is now connected to the Internet."
+msgstr "Po膷铆ta膷 je nyn铆 p艡ipojen k internetu"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Dynamick媒 rozsah IP adres:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Ji啪n铆 Georgie a ostrovy South Sandwich"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"V臎t拧ina t臎chto 煤daj暖 byla z铆sk谩na z va拧eho\n"
-"b臎啪铆c铆ho syst茅mu. M暖啪ete je upravit dle pot艡eby"
+msgid "Japan (broadcast)"
+msgstr "Japonsko (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Nastaven铆 serveru dhcpd"
+msgid "Mozambique"
+msgstr "Mosambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "IP rozsah do:"
+msgid "Icon"
+msgstr "Ikona"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "IP rozsah od:"
+msgid "Please choose what you want to backup"
+msgstr "Pros铆m vyberte si, co chcete z谩lohovat"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Jmenn茅 servery:"
+msgid "256 colors (8 bits)"
+msgstr "256 barev (8 bit暖)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "N谩zev dom茅ny:"
+msgid "Read-write"
+msgstr "Pro 膷ten铆 i z谩pis"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Adresa broadcastu:"
+msgid "Size: %s\n"
+msgstr "Velikost: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Maska pods铆t臎:"
+msgid "Hostname: "
+msgstr "N谩zev po膷铆ta膷e: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Sm臎rova膷e:"
+msgid "Chunk size %s\n"
+msgstr "Velikost bloku(chunk) %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Maska s铆t臎:"
+msgid "Build the future of Linux!"
+msgstr "Tvo艡te budoucnost Linuxu!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Pods铆钮:"
+msgid "Local Printer"
+msgstr "M铆stn铆 tisk谩rna"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Pro aktivaci zm臎n je pot艡eba spr谩vce oken restartovat.\n"
-"(p艡铆kaz v konzoli: service dm restart)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Nastaven铆 dhcpd..."
+" Copyright 漏2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Odebrat klienta"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Upravit klienta"
+msgid "ADSL connection"
+msgstr "ADSL p艡ipojen铆"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "P艡idat klienta -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Pro prvn铆 spu拧t臎n铆 pou啪ijte Pr暖vodce nebo Roz拧铆艡en茅.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Povolit tenk茅 klienty"
+msgid "Error!"
+msgstr "Chyba!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Tenk媒 klient"
+msgid "cable connection detected"
+msgstr "detekov谩no kabelov茅 p艡ipojen铆"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Nepoda艡ilo se vytvo艡it obraz pro spou拧t臎n铆 ze s铆t臎!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Povolen铆 odep艡eno p艡i p艡enosu %s na %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "typ: %s"
+msgid "/_Report Bug"
+msgstr "/Nah_l谩sit chybu"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Odebrat u啪ivatele"
+msgid "Resize"
+msgstr "Zm臎nit velikost"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "P艡idat u啪ivatele -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Signalizuje, 啪e heslo v datab谩zi je jin茅 ne啪 kter茅 m谩 v datab谩zi\n"
-"Terminal Server.\n"
-"Sma啪te/znovu p艡idejte u啪ivatele pro povolen铆 p艡ihl谩拧en铆 na Terminal Server."
+msgid "Please enter the device name to use for backup"
+msgstr "Zadejte n谩zev za艡铆zen铆, na kter茅 se bude z谩lohovat"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Smazat v拧echny NBI"
+msgid "Resolution: %s\n"
+msgstr "Rozli拧en铆: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Smazat"
+msgid "matching"
+msgstr "shodn媒ch"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Bude to trvat n臎kolik minut."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Nelze na膷铆st moduly pro j谩dro odpov铆daj铆c铆 instalovan茅mu j谩dru (chyb铆 "
+"soubor\n"
+"%s), co啪 obecn臎 znamen谩, 啪e spou拧t臎c铆 disketa nem谩 j谩dro stejn茅 jako m谩 "
+"instala膷n铆 m茅dium (vytvo艡te pros铆m novou spou拧t臎c铆 disketu)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Sestavit v拧echna j谩dra -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Vyberte pros铆m spr谩vn媒 port. Nap艡铆klad \"COM1\" pod MS Windows se\n"
+"v Linuxu jmenuje \"ttyS0\"."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Nen铆 vybr谩na 啪谩dn谩 NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Tyto bal铆膷ky budou odebr谩ny"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Sestavit jedinou NIC -->"
+msgid "Connect to the Internet"
+msgstr "P艡ipojen铆 k Internetu"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Nebylo zvoleno 啪谩dn茅 j谩dro!"
+msgid "Use existing partitions"
+msgstr "Pou啪铆t existuj铆c铆 odd铆l"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Sestavit cel茅 j谩dro -->"
+msgid "Canadian (Quebec)"
+msgstr "Kanadsk茅 (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Spou拧t臎c铆 ISO"
+msgid "Mouse device: %s\n"
+msgstr "P艡铆pojen铆 my拧i: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Spou拧t臎c铆 disketa"
+msgid "Reselect correct fonts"
+msgstr "Znovu vybrat spr谩vn茅 fonty"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"P艡ehled drakTermServ\n"
-"\t\t\t \n"
-" - Vytv谩艡铆 zav谩d臎c铆 obrazy pro Etherboot:\n"
-" \t\tChcete-li zav茅st j谩dro skrz etherboot, mus铆te vytvo艡it zvl谩拧tn铆 "
-"kombinaci j谩dra a initrdrd.\n"
-" \t\tV臎t拧inu pr谩ce za v谩s ud臎l谩 mkinitrd-net a drakTermServ je pouze "
-"grafick茅 rozhran铆\n"
-" \t\tpro pomoc se spr谩vou 膷i p艡izp暖soben铆m t臎chto obraz暖.\n"
-"\n"
-" - Udr啪uje /etc/dhcpd.conf:\n"
-" \t\tKa啪d媒 ze s铆钮ov臎 zav谩d臎n媒ch klient暖 pot艡ebuje z谩znam v dhcpd."
-"conf, kter媒 mu p艡i艡ad铆 IP adresu\n"
-" \t\ta s铆钮ov媒 zav谩d臎c铆 obraz pro dan媒 po膷铆ta膷. drakTermServ umo啪n铆 "
-"tvorbu nebo odstran臎n铆 t臎chto z谩znam暖.\n"
-"\t\t\t\n"
-" \t\t(U PCI karet lze vynechat obraz - etherboot si vy啪谩d谩 spr谩vn媒 "
-"obraz. M臎li byste\n"
-" \t\ttak茅 vz铆t v 煤vahu, 啪e kdy啪 hled谩 etherboot obrazy, o膷ek谩v谩 n谩zvy "
-"jako\n"
-" \t\tboot-3c59x.nbi, a ne boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tTypick媒 soubor dhcpd.conf podporuj铆c铆 bezdiskov茅 klienty vypad谩 "
-"jako:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tI kdy啪 m暖啪ete pou啪铆t rozsah IP adres m铆sto nastaven铆 specifick茅ho "
-"z谩znamu pro\n"
-"\t\t\tpo膷铆ta膷 klienta, pou啪it铆 pevn茅 adresy v谩m umo啪n铆 zadat funkcionalitu\n"
-"\t\t\tdo soubor暖 s nastaven铆m pro specifick茅ho klienta, kter茅 poskytuje "
-"ClusterNFS.\n"
-"\t\t\t\n"
-"\t\t\tPozn谩mka: Polo啪ku \"#type\" pou啪铆v谩 pouze drakTermServ. Klienti mohou "
-"b媒t bu膹 \"thin\"\n"
-"\t\t\tnebo \"fat\". Tenc铆 klienti provozuj铆 v臎t拧inu software na serveru "
-"pomoc铆 xdmcp, tlust铆 klienti provozuj铆 v臎t拧inu\n"
-"\t\t\tsoftware na klientsk茅m po膷铆ta膷i. Zvl谩拧tn铆 inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$, je\n"
-"\t\t\tvytvo艡en pro tenk茅ho klienty. Syst茅mov茅 soubory s nastaven铆m xdm-"
-"config, kdmrc a gdm.conf jsou upraveny\n"
-"\t\t\tp艡i pou啪it铆 tenk媒ch klient暖 tak, aby povolovaly xdmcp. Jeliko啪 p艡i "
-"pou啪it铆 xdmcp vznikaj铆 bezpe膷nostn铆 rizika,\n"
-"\t\t\tjsou upraveny soubory hosts.deny a hosts.allow tak, aby omezily "
-"p艡铆stup pouze z lok谩ln铆 s铆t臎.\n"
-"\t\t\t\n"
-"\t\t\tPozn谩mka: Po p艡id谩n铆 nebo odebr谩n铆 klient暖 mus铆te zastavit a znovu "
-"spustit server.\n"
-"\t\t\t\n"
-" - Udr啪uje /etc/exports:\n"
-" \t\tClusterNFS dovoluje exportovat ko艡enov媒 souborov媒 syst茅m na "
-"bezdiskov茅 klienty. drakTermServ\n"
-" \t\tnastav铆 odpov铆daj铆c铆 z谩znam tak, aby umo啪nil anonymn铆 p艡铆stup ke "
-"ko艡enov茅mu souborov茅mu syst茅mu\n"
-" \t\tbezdiskov媒m klient暖m.\n"
-"\n"
-" \t\tTypick媒 z谩znam pro export ClusterNFS vypad谩:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tSe SUBNET/MASK odpov铆daj铆c铆 va拧铆 s铆ti.\n"
-" \t\t\n"
-" - Udr啪uje /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tAby se mohli u啪ivatel茅 p艡ihl谩sit do syst茅mu z bezdiskov媒ch "
-"stanic, mus铆 b媒t duplikov谩n\n"
-" \t\tjejich z谩znam z /etc/shadow v /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ v tomto ohledu\n"
-" \t\tpom谩h谩 p艡id谩n铆m nebo odebr谩n铆m u啪ivatel暖 syst茅mu z tohoto "
-"souboru.\n"
-"\n"
-" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ pro ka啪d茅ho klienta:\n"
-" \t\tSkrze ClusterNFS m暖啪e m铆t ka啪d媒 bezdiskov媒 klient sv茅 vlastn铆 "
-"unik谩tn铆 soubory s nastaven铆m\n"
-" \t\tum铆st臎n茅 na serveru v ko艡enov茅m souborov茅m syst茅mu. drakTermServ "
-"bude v budoucnu pom谩hat\n"
-" \t\ts tvorbou t臎chto soubor暖.\n"
-"\n"
-" - Soubory s nastaven铆m syst茅mu pro ka啪d茅ho klienta:\n"
-" \t\tSkrze ClusterNFS m暖啪e m铆t ka啪d媒 bezdiskov媒 klient sv茅 vlastn铆 "
-"unik谩tn铆 soubory s nastaven铆m\n"
-" \t\tum铆st臎n茅 na serveru v ko艡enov茅m souborov茅m syst茅mu. drakTermServ "
-"bude v budoucnu pom谩hat\n"
-" \t\ts tvorbou t臎chto soubor暖,\n"
-" \t\tnap艡. /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard zvl谩拧钮 pro\n"
-" \t\tka啪d茅ho klienta.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ nastav铆 tento soubor tak, aby pracoval v souladu s "
-"obrazy vytvo艡en媒mi pomoc铆\n"
-" \t\tmkinitrd-net a z谩znamy v /etc/dhcpd.conf tak, aby byl ka啪d茅mu "
-"bezdiskov茅mu klientu poskytnut\n"
-" \t\todpov铆daj铆c铆 zav谩d臎c铆 obraz.\n"
-"\n"
-" \t\tTypick媒 soubor s nastaven铆m tftp vypad谩 takto:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tZm臎ny oproti v媒choz铆 instalaci zahrnuj铆 zm臎nu p艡铆znaku disable "
-"na\n"
-" \t\t'no' a zm臎nu cesty adres谩艡e na /var/lib/tftpboot, kam ukl谩d谩\n"
-" \t\tmkinitrd-net sv茅 obrazy.\n"
+"popis voleb:\n"
"\n"
-" - Vytv谩艡铆 diskety a CD etherboot:\n"
-" \t\tBezdiskov茅 klientsk茅 po膷铆ta膷e pot艡ebuj铆 bu膹 obrazy ROM na NIC, "
-"nebo zav谩d臎c铆 disketu\n"
-" \t\tnebo CD, aby mohly spustit zav谩d臎c铆 sekvenci. drakTermServ "
-"pom暖啪e tyto zav谩d臎c铆 obrazy generovat,\n"
-" \t\tv z谩vislosti na NIC na klientsk茅m stroji.\n"
-" \t\t\n"
-" \t\tZ谩kladn铆 p艡铆klad ru膷n铆ho vytvo艡en铆 zav谩d臎c铆ho obrazu diskety pro "
-"kartu 3Com 3c509:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Bu膹te opatrn铆 p艡i z谩lohov谩n铆 na FTP, proto啪e na server je posl谩na\n"
+"pouze ji啪 vytvo艡en谩 z谩loha.\n"
+"Je tud铆啪 vhodn茅 nejd艡铆ve prov茅st z谩lohu na disk p艡ed t铆m, ne啪\n"
+"ji po拧lete na server.\n"
"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" Pod臎kov谩n铆:\n"
-"\t- LTSP Projekt http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Posledn铆 ot谩zka je na to, zda chcete spustit grafick茅 prost艡ed铆 p艡i startu.\n"
+"Tato ot谩zka se zobraz铆 i v p艡铆pad臎, 啪e nastaven铆 p艡edt铆m neotestujete.\n"
+"Je z艡ejm茅, 啪e odpov铆te \"Ne\" v p艡铆pad臎, 啪e po膷铆ta膷 bude pracovat\n"
+"jako server nebo v p艡铆pad臎, 啪e se nepoda艡ilo spr谩vn臎 nastavit grafickou "
+"kartu."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright 漏2002 by MandrakeSoft \n"
-"\tStew Benedict <sbenedict\\@mandrakesoft.com>\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Nyn铆 se p艡ipravuje konfigurace %s p艡ipojen铆."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "P艡idat/Odebrat klienty"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "P艡idat/Odebrat u啪ivatele"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [v拧echno]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Autodetekce tisk谩rny"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "nelze nal茅zt 啪谩dn媒 font.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Startovac铆 image ze s铆t臎"
+msgid "Language"
+msgstr "V媒b臎r jazyka"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disketa Etherboot/ISO"
+msgid "Printer model selection"
+msgstr "V媒b臎r modelu tisk谩rny"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Zastavit server"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "T铆m 啪e zm臎n铆te typ odd铆lu %s p艡ijdete o v拧echna jeho data"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Spustit server"
+msgid "%d seconds"
+msgstr "%d sekund"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Vypnout server"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Vlo啪te pr谩zdnou disketu do %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Zapnout server"
+msgid "A valid URI must be entered!"
+msgstr "Mus铆 b媒t zad谩no spr谩vn茅 URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Nastaven铆 Mandrake Terminal Server"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Chcete pou啪铆t nalezen茅 rozhran铆 \"%s\" ?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Odstranit posledn铆 polo啪ku"
+msgid "Re-configure interface and DHCP server"
+msgstr "P艡enastaven铆 rozhran铆 a DHCP serveru"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "P艡idat polo啪ku"
+msgid "Sound configuration"
+msgstr "Nastaven铆 zvuku"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Automatick谩 instalace"
+msgid "Photo test page"
+msgstr "Testovac铆 str谩nka s fotografi铆"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s 煤sp臎chem vytvo艡ena.\n"
-"Nyn铆 lze prov茅st znovu instalaci."
+msgid "Custom disk partitioning"
+msgstr "Vlastn铆 rozd臎len铆 disku"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Gratuluji!"
+msgid "Enter Printer Name and Comments"
+msgstr "Zadejte n谩zev tisk谩rny a koment谩艡"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"N谩sleduj铆c铆 tisk谩rny\n"
"\n"
-"V铆tejte.\n"
-"\n"
-"Parametry pro automatickou instalaci jsou p艡铆stupn茅 v sekci nalevo"
+"%s %s\n"
+"jsou p艡铆mo p艡ipojeny k va拧emu po膷铆ta膷i"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Vytv谩艡铆m disketu pro automatickou instalaci"
+msgid "type: %s"
+msgstr "typ: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "ru膷n臎"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovensk茅 (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte pros铆m, kter媒 z krok暖 instalace m谩 b媒t proveden automaticky stejn臎 "
-"jako instala膷n铆 program nebo bude ru膷n臎 zad谩n"
+msgid "No Sound Card detected!"
+msgstr "Nebyla nalezena 啪谩dn谩 zvukov谩 karta!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Nastaven铆 automatick媒ch krok暖"
+msgid "Mouse Port"
+msgstr "P艡ipojen铆 my拧i"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "zopakovat"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Pro aktivaci zm臎n je pot艡eba spr谩vce oken restartovat.\n"
+"(p艡铆kaz v konzoli: service dm restart)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Server FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Zde m暖啪ete nastavit disketu pro automatickou instalaci. Tato volba je n臎kdy "
-"nebezpe膷n谩 a m臎la by se pou啪铆vat s opatrnost铆.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, kter谩 ji啪 na tomto po膷铆ta膷i byla "
-"provedena s t铆m, 啪e v n臎kter媒ch kroc铆ch lze zadat jin茅 hodnoty.\n"
-"\n"
-"Pro maxim谩ln铆 bezpe膷nost nen铆 rozd臎lov谩n铆 disk暖 ani form谩tov谩n铆 prov谩d臎no "
-"automaticky, i p艡esto, pokud to p艡i instalaci zvol铆te.\n"
+"Argumenty: (arg)\n"
"\n"
-"Chcete pokra膷ovat?"
+" Povol铆/Zak谩啪e bezpe膷nostn铆 kontrolu pravideln臎 ka啪dou hodinu."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Nastaven铆 automatick茅 instalace"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "konverze pfm font暖"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemohu naj铆t pot艡ebn媒 soubor '%s ' s obrazem."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Typ sb臎rnice, ke kter茅 je p艡ipojena my拧"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Chyba!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Argumenty: (velikost)\n"
"\n"
-"Probl茅my p艡i obnov臎:\n"
-"\n"
-"P艡i obnovov谩n铆 DrakBackup nejd艡铆ve ov臎艡uje v拧echny\n"
-"z谩lohovan茅 soubory.\n"
-"P艡ed t铆m, ne啪 je soubor obnoven, provede DrakBackup v媒maz\n"
-"p暖vodn铆ho souboru, a tak p艡ijdete o v拧echna data.\n"
-"Bu膹te proto opatrn铆 a nesna啪te se modifikovat z谩lohovan谩\n"
-"data ru膷n臎.\n"
-"\n"
+"Nastav铆 velikost historie pro p艡铆kazy. Hodnota -1 znamen谩 neomezen谩."
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"popis voleb:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Bu膹te opatrn铆 p艡i z谩lohov谩n铆 na FTP, proto啪e na server je posl谩na\n"
-"pouze ji啪 vytvo艡en谩 z谩loha.\n"
-"Je tud铆啪 vhodn茅 nejd艡铆ve prov茅st z谩lohu na disk p艡ed t铆m, ne啪\n"
-"ji po拧lete na server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Popis:\n"
+"\"Zvukov谩 karta\": pokud je detekov谩na v po膷铆ta膷i zvukov谩 karta, je zde\n"
+"zobrazena. Pokud ale vid铆te, 啪e zobrazen谩 karta nen铆 p艡esn臎 tak, kterou\n"
+"m谩te v po膷铆ta膷i, m暖啪ete klepnut铆m na tla膷铆tko vybrat jinou kartu a ovlada膷."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comoros"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" DrakBackup je n谩stroj na z谩lohov谩n铆 syst茅mu.\n"
-" B臎hem konfigurace m暖啪ete vybrat: \n"
-"\t- Syst茅mov茅 soubory,\n"
-"\t- Soubory u啪ivatel暖,\n"
-"\t- Ostatn铆 soubory.\n"
-"\tnebo Cel媒 syst茅m a jin茅 (jako jsou odd铆ly s Windows).\n"
"\n"
-" DrakBackup dovoluje z谩lohovat na:\n"
-"\t- Pevn媒 disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spu拧t臎n铆m, z谩chranou a autoinstalac铆).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- WebDAV.\n"
-"\t- P谩skovou jednotku.\n"
"\n"
-" DrakBackup dovoluje prov茅st obnovu do vybran茅ho adres谩艡e.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Jako v媒choz铆 jsou um铆st臎ny v拧echny z谩lohy do adres谩艡e\n"
-" /var/lib/drakbackup \n"
"\n"
-" Konfigura膷n铆 soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
-"Postup p艡i obnov臎:\n"
"\n"
-" P艡i prov谩d臎n铆 obnovy odstran铆 DrakBackup p暖vodn铆 adres谩艡\n"
-" a ov臎艡铆, 啪e z谩lohovan茅 soubory nejsou po拧kozeny.\n"
-" Doporu膷uje se ale prov茅st z谩lohu t臎chto dat p艡ed proveden铆m\n"
-" obnovy.\n"
+"Nyn铆 se bude konfigurovat p艡ipojen铆 %s.\n"
"\n"
"\n"
+"Stiskn臎te OK pro pokra膷ov谩n铆."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" aktualizace 2002 MandrakeSoft od Stewa Benedicta <sbenedict\\@mandrakesoft."
-"com>"
+msgid "Yaboot mode"
+msgstr "Re啪im Yaboot"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kabel)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright 漏2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
+"Nelze znovu spustit LiLo!\n"
+"Chcete-li dokon膷it instalaci t茅matu pro LiLo, spus钮te na p艡铆kazov茅 艡谩dce "
+"\"lilo\" jako u啪ivatel root."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Standardn铆 t艡铆tla膷铆tkov谩 my拧"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Vyberte dal拧铆 m茅dium, kde jsou um铆st臎ny z谩lohy"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Spr谩vce software"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14358,17 +13710,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"Popis voleb pro obnovu:\n"
@@ -14395,5041 +13749,5725 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"- Z谩loha syst茅mov媒ch soubor暖:\n"
-" \n"
-"\tTato volba z谩lohuje adres谩艡 /etc, kter媒 obsahuje v拧echny\n"
-"\tkonfigura膷n铆 soubory. D谩vejte pozor p艡i obnov臎 na to,\n"
-"\taby se nep艡epsaly soubory:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Z谩lohovat soubory u啪ivatel暖:\n"
-"\n"
-"\tTato volba dovoluje vybrat v拧echny u啪ivatele, kter茅\n"
-"\t\tchcete z谩lohovat.\n"
-"\tAby se u拧et艡ilo m铆sto na disku, nen铆 dobr茅 zahrnout cache\n"
-"\tod prohl铆啪e膷e.\n"
-"\n"
-" - Z谩lohovat ostatn铆 soubory:\n"
-"\n"
-"\tTato volba dovol铆 p艡idat dal拧铆 data pro z谩lohov谩n铆.\n"
-"\tV sou膷asnosti nen铆 mo啪n茅 p艡i tomto z谩lohov谩n铆 zvolit\n"
-"\tp艡铆r暖stkov茅 z谩lohov谩n铆.\t\n"
-"\n"
-" - P艡铆r暖stkov茅 z谩lohov谩n铆:\n"
-"\n"
-"\tP艡铆r暖stkov茅 z谩lohov谩n铆 je velmi mocn媒 druh z谩lohov谩n铆,\n"
-"\tproto啪e dovoluje z谩lohovat v拧echna data pouze poprv茅\n"
-"\ta d谩le se z谩lohuj铆 pouze zm臎ny.\n"
-"\tB臎hem obnovy tak budete moci zadat, od jak茅ho data se\n"
-"\tmaj铆 data obnovit.\n"
-"\tPokud nezvol铆te tuto mo啪nost, bude p艡i ka啪d茅 z谩loze\n"
-"\tp艡edchoz铆 z谩loha smaz谩na.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" N臎kter茅 chyby p艡i nastaven铆 po拧ty jsou zp暖sobeny\n"
-" 拧patnou konfigurac铆 programu postfix. Pro vy艡e拧en铆\n"
-" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Znovu odeslat"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"Popis voleb:\n"
-"\n"
-" V tomto kroku v谩m aplikace DrakBackup umo啪n铆 zm臎nit:\n"
-"\n"
-" - Re啪im komprese:\n"
-" \n"
-" Pokud zvol铆te kompresi bzip2, budete m铆t kompresi\n"
-" lep拧铆 ne啪 pomoc铆 gzip (okolo 2-10%%).\n"
-" Tato volba nen铆 zvolena jako v媒choz铆, proto啪e\n"
-" vy啪aduje daleko v铆ce 膷asu (a啪 o 1000%% v铆ce).\n"
-"\n"
-" - Re啪im aktualizace:\n"
-"\n"
-" Tato volba aktualizuje z谩lohu, ale nen铆 moc u啪ite膷n谩,\n"
-" proto啪e p艡ed aktualizac铆 mus铆te nejd艡铆ve z谩lohu\n"
-" dekomprimovat.\n"
-" \n"
-"- Re啪im pou啪it铆 souboru .backupignore:\n"
-"\n"
-" Stejn臎 jako pro cvs, i pro DrakBackup lze uv茅st seznam\n"
-" soubor暖 v .backupignore, kter茅 budou p艡i z谩lohov谩n铆 ignorov谩ny.\n"
-" nap艡.:\n"
-" \\$> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD je v mechanice - pokra膷ovat."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "DrakBackup"
+msgid "KB"
+msgstr "kB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Obnovit"
+msgid "Network & Internet"
+msgstr "S铆钮 & Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Z谩lohovat nyn铆"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litevsk茅 \"foneticky\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Roz拧铆艡en谩 konfigurace"
+msgid "Net Boot Images"
+msgstr "Startovac铆 image ze s铆t臎"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Pr暖vodce konfigurac铆"
+msgid "Sharing of local scanners"
+msgstr "Sd铆len铆 lok谩ln铆ch skener暖"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Prohl茅dnout konfiguraci z谩lohy."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Plug'n Play detekce selhala. Vyberte pros铆m p艡esn媒 monitor"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Z谩lohovat z konfigura膷n铆ho souboru"
+msgid "Services and deamons"
+msgstr "Slu啪by a d茅moni"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Nastaven铆 pro DrakBackup"
+msgid "Remote host name missing!"
+msgstr "Chyb铆 n谩zev vzd谩len茅ho po膷铆ta膷e!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Celkov媒 pr暖b臎h"
+msgid "with /usr"
+msgstr "s /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Pos铆l谩m soubory..."
+msgid "Network"
+msgstr "S铆钮"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "soubory poslan茅 p艡es FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Automaticky nal茅zt tisk谩rny sd铆len茅 po膷铆ta膷i s Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Z谩lohovat dal拧铆 soubory"
+msgid "This password is too simple"
+msgstr "Toto heslo je p艡铆li拧 jednoduch茅"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Z谩lohovat u啪ivatelsk茅 soubory"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovensk茅 (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Z谩lohovat syst茅mov茅 soubory"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Tvo艡it a upravovat v r暖zn媒ch jazyc铆ch jako Perl, Python, C a C++ nebylo "
+"nikdy tak jednoduch茅 d铆ky GNU gcc 3 a nejlep拧铆m v媒vojov媒m prost艡ed铆m ze "
+"sv臎ta Open Source."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Vyv铆j铆 se... 膷ekejte pros铆m."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Opravdu minim谩ln铆 instalace (speci谩ln臎 bez urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Nebyl nalezen konfigura膷n铆 soubor, \n"
-"klepn臎te na Pr暖vodce nebo na Roz拧铆艡en茅."
+" P艡enos \n"
+"Nyn铆"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Zkontrolujte pros铆m data pro z谩lohov谩n铆..."
+msgid "Use daemon"
+msgstr "Pou啪铆t d茅mona"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Pros铆m zvolte si m茅dium pro z谩lohy..."
+msgid "Authentication"
+msgstr "Ov臎艡en铆"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Pros铆m zvolte data pro obnovu..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "P艡idat tuto tisk谩rnu do Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Je pot艡eba nainstalovat tyto bal铆膷ky:\n"
+msgid "Additional CUPS servers: "
+msgstr "Dal拧铆 CUPS servery: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Chyba p艡i pos铆l谩n铆 souboru p艡es FTP.\n"
-" Pros铆m opravte va拧e nastaven铆 FTP."
+"Vyberte ze seznamu jednu z automaticky nalezen媒ch tisk谩ren nebo zadejte do "
+"pol铆膷ek n谩zev nebo IP adresu tisk谩rny a voliteln臎 膷铆slo portu (v媒choz铆 je "
+"9100)."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Kam chcete p艡ipojit %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Obnovit p艡es s铆钮"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Al啪铆rsko"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-velikost"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Chyba p艡i pos铆l谩n铆 po拧ty\n"
-" V谩mi zvolen媒 report nebyl odesl谩n\n"
-" Prove膹te pros铆m nastaven铆 sendmailu"
+"V p艡铆pad臎, 啪e je pro va拧i kartu mo啪no pou啪铆t v铆ce r暖zn媒ch server暖 s 3D\n"
+"akcelerac铆 nebo bez, z谩le啪铆 na va拧em v媒b臎ru, kter媒 v谩m nejv铆ce vyhovuje."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Dal拧铆"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tZ谩lohov谩n铆 pou啪铆v谩 tar a gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "P艡edchoz铆"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Ulo啪it"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[VOLBY]...\n"
+" -no-confirmation nepotvrzuje prvn铆 ot谩zku v re啪imu MandrakeUpdate\n"
+" --no-verify-rpm neprov谩d铆 ov臎艡en铆 podpisu u bal铆膷k暖\n"
+" --changelog-first v okn臎 s popisem nejd艡铆ve zobraz铆 changelog p艡ed "
+"seznamem soubor暖\n"
+" --merge-all-rpmnew navrhne spojit v拧echny nalezen茅 soubory .rpmnew/."
+"rpmsave"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Vytvo艡it z谩lohu"
+msgid "Setting Default Printer..."
+msgstr "Nastavuji v媒choz铆 tisk谩rnu..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Pr暖b臎h obnoven铆"
+msgid "Interface %s (using module %s)"
+msgstr "Rozhran铆 %s (pou啪铆v谩 modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Obnovit z katalogu"
+msgid "Name: %s\n"
+msgstr "Jm茅no: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Proch谩zet nov臎 obnoven媒 adres谩艡."
+msgid "Generating preview ..."
+msgstr "Generuji n谩hled ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD je v mechanice - pokra膷ovat."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Frekvence m谩 povolen茅 p艡铆pony k, M nebo G (nap艡铆klad \"2,46G\" pro frekvenci "
+"2,46 GHz) nebo p艡idejte dostatek '0' (nul)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Vlastn铆 obnova"
+msgid "serial"
+msgstr "S茅riov谩"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Obnovit v拧echny z谩lohy"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Obnova selhala..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gruz铆nsk茅 (rozlo啪en铆 \"Latin\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Soubory obnoveny..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
+"Z铆skejte to nejlep拧铆 se Strategick媒mi partnery distribuce Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Vy啪adov谩na cesta nebo modul"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Nyn铆 lze zadat volby pro modul %s.\n"
+"Pozn.: ka啪d谩 adresa by m臎la b媒t ve tvaru 0x nap艡. '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Vy啪adov谩n n谩zev po膷铆ta膷e"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 v谩m poskytuje Ovl谩dac铆 centrum Mandrake, mocn媒 n谩stroj "
+"pro pln茅 p艡izp暖soben铆 va拧eho po膷铆ta膷e va拧im pot艡eb谩m. Nastavte a p艡izp暖sobte "
+"si prvky jako 煤rove艌 zabezpe膷en铆, p艡铆davn谩 za艡铆zen铆 (obrazovku, my拧, "
+"kl谩vesnici...), p艡ipojen铆 k Internetu a daleko v铆ce!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Vy啪adov谩no u啪ivatelsk茅 jm茅no"
+msgid "Kenya"
+msgstr "Ke艌a"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Vy啪adov谩no heslo"
+msgid "Use ``Unmount'' first"
+msgstr "Nejprve pou啪ijte ''Odpojit''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Cesta na po膷铆ta膷i nebo modul"
+msgid "Installing mtools packages..."
+msgstr "Instaluji bal铆膷ky pro mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "N谩zev po膷铆ta膷e"
+msgid "You must specify a root partition"
+msgstr "Mus铆te zadat ko艡enov媒 odd铆l"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Obnovit p艡es s铆钮 pomoc铆 protokolu: %s"
+msgid "first step creation"
+msgstr "prvn铆 krok p艡i vytv谩艡en铆"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Obnovit p艡es s铆钮"
+msgid "Both Shift keys simultaneously"
+msgstr "Ob臎 kl谩vesy Shift sou膷asn臎"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "P谩ska nem谩 spr谩vn媒 n谩zev. M谩 ozna膷en铆 %s."
+msgid "Select a scanner model"
+msgstr "Zvolte si model skeneru"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Vlo啪te p谩sku s n谩zvem %s\n"
-" do p谩skov茅 jednotky %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LprNG - LPR Nov茅 generace"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Obnovit z p谩sky"
+msgid "Drakbackup Configuration"
+msgstr "Nastaven铆 pro DrakBackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "CD nem谩 spr谩vn媒 n谩zev. Je ozna膷eno %s."
+msgid "Save as.."
+msgstr "Ulo啪it jako..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Vlo啪te CD s ozna膷en铆m %s do CD\n"
-" mechaniky do p艡铆pojn茅ho bodu /mnt/cdrom"
+"Toto rozhran铆 je拧t臎 nebylo nastaveno.\n"
+"Spus钮te pr暖vodce konfigurac铆 z hlavn铆ho okna"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Obnovit z CD"
+msgid "Korea (North)"
+msgstr "Korea (Severn铆)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Souboru pro z谩lohu z %s nenalezeny."
+msgid "Autologin"
+msgstr "Automatick茅 p艡ihl谩拧en铆"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Zm臎nit adres谩艡\n"
-"pro obnovu"
+msgid "System configuration"
+msgstr "Konfigurace syst茅mu"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Heslo Spr谩vce dom茅ny"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Vybr谩na obnova\n"
-"Soubory"
+"Bezvadn臎 p艡izp暖sobte v谩拧 po膷铆ta膷 va拧im pot艡eb谩m d铆ky 11 u啪ivatelsk媒m "
+"rozhran铆m, kter茅 jsou k dispozici v distribuci Mandrake Linux a kter茅 lze "
+"pln臎 upravovat: KDE 3.1, GNOME 2.2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Nastavuji tisk谩rnu ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Vybr谩na obnova\n"
-"Z谩znam katalogu"
+"Pro zachov谩n铆 integrity po proveden茅 zm臎n臎 velikosti odd铆lu(暖) bude p艡i\n"
+"dal拧铆m spu拧t臎n铆 syst茅mu Windows provedena kontrola souborov茅ho syst茅mu."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Odebrat adres谩艡e u啪ivatele p艡ed obnovou."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Prov茅st novou z谩lohu p艡ed obnovou (pouze pro p艡铆r暖stkovou z谩lohu)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "pokud je nastaveno, spou拧t铆 kontrolu rpm datab谩ze."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "vyberte cestu pro obnoven铆 (m铆sto /)"
+msgid "Virgin Islands (British)"
+msgstr "Panensk茅 ostrovy (britsk茅)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Obnovit ostatn铆"
+msgid "Bermuda"
+msgstr "Bermudy"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Obnovit u啪ivatele"
+msgid "click here if you are sure."
+msgstr "klepn臎te zde, pokud jste si jisti."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Obnovit syst茅m"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Nebyl nalezen konfigura膷n铆 soubor, \n"
+"klepn臎te na Pr暖vodce nebo na Roz拧铆艡en茅."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Other Media"
-msgstr "Dal拧铆 m茅dia"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Zde je vyps谩n seznam ji啪 existuj铆c铆ch detekovan媒ch odd铆l暖 na pevn茅m disku.\n"
+"M暖啪ete ponechat volby detekovan茅 pr暖vodcem, proto啪e ve v臎t拧in臎 p艡铆pad暖\n"
+"vyhovuj铆. Pokud chcete prov茅st n臎jak茅 zm臎ny, mus铆te definovat aspo艌 "
+"ko艡enov媒\n"
+"odd铆l (\"/\"). Velikost odd铆l暖 zvolte dostate膷nou, jinak nebude mo啪n茅 "
+"nainstalovat\n"
+"dostate膷n茅 mno啪stv铆 program暖. Pokud chcete ukl谩dat data na zvl谩拧tn铆 odd铆l,\n"
+"vytvo艡te tak茅 odd铆l \"/home\".\n"
+"\n"
+"Ka啪d媒 odd铆l vypsan媒 n铆啪e m谩: \"N谩zev\", \"Velikost\".\n"
+"\n"
+"\"N谩zev\" je slo啪en n谩sledovn臎: \"typ pevn茅ho disku\", \"膷铆slo disku\",\n"
+"\"膷铆slo odd铆lu\". (nap艡铆klad \"hda1\").\n"
+"\n"
+"Pokud m谩te IDE disky, pak je \"typ pevn茅ho disku\" \"hd\", pokud m谩te SCSI,\n"
+"ozna膷en铆 bude \"sd\".\n"
+"\n"
+"\"膶铆slo disku\" je v啪dy p铆smeno za \"hd\" nebo \"sd\". Pro IDE disky je "
+"takto:\n"
+"\n"
+" * \"a\" znamen谩 \"master disk na prim谩rn铆m IDE 艡adi膷i\",\n"
+"\n"
+" * \"b\" znamen谩 \"slave disk na prim谩rn铆m IDE 艡adi膷i\",\n"
+"\n"
+" * \"c\" znamen谩 \"master disk na sekund谩rn铆m IDE 艡adi膷i\",\n"
+"\n"
+" * \"d\" znamen谩 \"slave disk na sekund谩rn铆m IDE 艡adi膷i\".\n"
+"\n"
+"Pro SCSI disky plat铆, 啪e \"a\" je \"nejmen拧铆 SCSI ID\", \"b\" je \"druh茅\n"
+"nejmen拧铆 SCSI ID\" atd."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Vyberte dal拧铆 m茅dium, kde jsou um铆st臎ny z谩lohy"
+msgid "Remove"
+msgstr "Odebrat"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Zadejte adres谩艡, kde jsou um铆st臎ny z谩lohy"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Obnovit z pevn茅ho disku."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Pou啪铆t kv贸ty pro z谩lo啪n铆 soubory."
+msgid "Pipe job into a command"
+msgstr "Poslat tiskovou 煤lohu do p艡铆kazu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-"Zadejte pros铆m maxim谩ln铆 velikost\n"
-" povolenou pro DrakBackup"
+"nov媒, dynamick媒 n谩zev za艡铆zen铆, kter媒 generuje zabudovan媒 syst茅m j谩dra devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Zadejte adres谩艡, kam bude um铆st臎na z谩loha:"
+msgid "Yes"
+msgstr "Ano"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Pou啪铆t pro z谩lohov谩n铆 pevn媒 disk"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Vyberte datum obnoven铆 z谩lohy"
+msgid "Which protocol do you want to use?"
+msgstr "Kter媒 protokol chcete pou啪铆t?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Z谩lohovat syst茅mov茅 soubory p艡ed:"
+msgid "Restore Progress"
+msgstr "Pr暖b臎h obnoven铆"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Seznam u啪ivatel暖 pro obnoven铆 (od ka啪d茅ho bude obnovena pouze posledn铆 "
-"z谩loha)"
+msgid "Estonia"
+msgstr "Estonsko"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Obnovit tak茅 ostatn铆 soubory."
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Zvolte po膷铆ta膷, na kter茅m budou p艡铆stupn茅 lok谩ln铆 skenery:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Obnovit nastaven铆 "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Ve tabulce diskov媒ch odd铆l暖 je mezera, ale nemohu ji pou啪铆t.\n"
+"Jedin茅 艡e拧en铆 je p艡esunout prim谩rn铆 odd铆ly tak, abyste m臎li mezeru vedle\n"
+"roz拧铆艡en媒ch odd铆l暖."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " 煤sp臎拧n臎 obnovena na %s "
+msgid "Channel"
+msgstr "Kan谩l"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " V拧echna vybran谩 data byla "
+msgid "Add"
+msgstr "P艡idat"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Z谩lo啪n铆 soubory jsou po拧kozen茅"
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Nen铆 nastaveno 啪谩dn茅 sd铆len铆 Internetov茅ho p艡ipojen铆."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Zru拧te tuto volbu p艡i dal拧铆m spu拧t臎n铆."
+msgid " Error while sending mail. \n"
+msgstr " Chyba p艡i pos铆l谩n铆 po拧ty. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Kl谩vesnice"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Seznam po拧kozen媒ch dat:\n"
-"\n"
+"Vlo啪te CD s ozna膷en铆m %s do CD\n"
+" mechaniky do p艡铆pojn茅ho bodu /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Seznam dat pro obnoven铆:\n"
-"\n"
+"Intenzita m谩 povolen茅 p艡铆pony k, M nebo G (nap艡. \"11M\" nebo 11M) nebo "
+"p艡idejte dostate膷n媒 po膷et '0' (nul)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Pro prvn铆 spu拧t臎n铆 pou啪ijte Pr暖vodce nebo Roz拧铆艡en茅.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Zvolte si p艡ipojen铆, kter茅 chcete nastavit"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-S铆t铆 p艡es WebDAV.\n"
+msgid "Please wait, setting security level..."
+msgstr "膶ekejte pros铆m, nastavuji 煤rove艌 zabezpe膷en铆..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-S铆t铆 p艡es rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Distribuce Mandrake Linux 9.1 je nejlep拧铆 v媒vojov谩 platforma."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-S铆t铆 p艡es SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Nastavuji s铆钮ov茅 za艡铆zen铆 %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-S铆t铆 p艡es FTP.\n"
+msgid "activated"
+msgstr "aktivov谩no"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-P谩ska \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Vyberte si pros铆m, kter媒 s铆钮ov媒 adapt茅r chcete pou啪铆t pro dhcp server."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Vyhled谩v谩m bal铆膷ky pro aktualizaci"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevn媒 disk.\n"
+msgid "Mount point: "
+msgstr "Adres谩艡 p艡ipojen铆 (mount point): "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- D茅mon (%s) zahrnuje :\n"
+msgid "parse all fonts"
+msgstr "zpracov谩v谩m v拧echny fonty"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZ谩lohov谩n铆 pou啪铆v谩 tar a gzip\n"
+msgid "With X"
+msgstr "X prost艡ed铆"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZ谩lohov谩n铆 pou啪铆v谩 tar a bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Konfigurace dvou monitor暖"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahrnout syst茅mov茅 soubory\n"
+msgid "No browser available! Please install one"
+msgstr "Nen铆 k dispozici 啪谩dn媒 prohl铆啪e膷! Pros铆m nainstalujte n臎jak媒."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Zachovat zm臎ny?\n"
+"Aktu谩ln铆 konfigurace je:\n"
"\n"
-"- Volby:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t u啪ivatelsk茅 jm茅no: %s\n"
-"\t\t cesta: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Nem暖啪ete pou啪铆t ReiserFS pro odd铆l men拧铆 ne啪 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Ulo啪it skrze %s na po膷铆ta膷: %s\n"
+"Protokol rwho umo啪艌uje vzd谩len媒m u啪ivatel暖m z铆skat seznam\n"
+"v拧ech u啪ivatel暖 p艡ihl谩拧en媒ch na po膷铆ta膷i s d茅monem rwho (je to podobn茅\n"
+"slu啪b臎 finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Jm茅no dom茅ny"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Ulo啪it na p谩sku na za艡铆zen铆: %s"
+msgid "Sharing of local printers"
+msgstr "Sd铆len铆 lok谩ln铆ch tisk谩ren"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-session)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " na za艡铆zen铆: %s"
+msgid "Available printers"
+msgstr "Dostupn茅 tisk谩rny"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Pr谩zdn媒"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Vyp谩lit na CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Smazat pomocn茅 tar soubory po proveden铆 z谩lohy.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Ulo啪it na pevn媒 disk do adres谩艡e: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Dal拧铆 soubory:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (X Window System) je srdcem grafick茅ho rozhran铆 pro GNU/Linux, kter茅\n"
+"vyu啪铆vaj铆 dod谩van茅 grafick茅 prost艡ed铆 (KDE, GNOME, AfterStep, WindowMaker).\n"
"\n"
-"- Soubory u啪ivatel暖:\n"
+"Nyn铆 bude zobrazen seznam r暖zn媒ch parametr暖, kter茅 je mo啪n茅 zm臎nit pro\n"
+"dosa啪en铆 optim谩ln铆ho grafick茅ho zobrazen铆\n"
+"Grafick谩 karta\n"
+"\n"
+" Instala膷n铆 program je schopen automaticky detekovat a nastavit grafickou\n"
+"kartu instalovanou v po膷铆ta膷i. Pokud se to nepoda艡铆, m谩te mo啪nost si ze\n"
+"seznamu vybrat p艡铆slu拧nou grafickou kartu ru膷n臎.\n"
+"\n"
+" V p艡铆pad臎, 啪e pro va拧i kartu je mo啪n茅 pou啪铆t v铆ce r暖zn媒ch server暖, s 3D\n"
+"akcelerac铆 nebo bez, je pouze na v谩s, kter媒 server si vyberete jako nejv铆ce\n"
+"vyhovuj铆c铆 va拧im pot艡eb谩m.\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" Instala膷n铆 program dok谩啪e v臎t拧inou automaticky detekovat a spr谩vn臎 \n"
+"nastavit monitor p艡ipojen媒 k va拧emu po膷铆ta膷i. Pokud se to nezda艡铆, lze se\n"
+"seznamu vybrat monitor, kter媒 m谩te.\n"
+"\n"
+"\n"
+"Rozli拧en铆\n"
+"\n"
+" Zde si m暖啪ete vybrat rozli拧en铆 a barevnou hloubku, kter茅 va拧e karta \n"
+"podporuje. Vyberte si to co v谩m nejv铆ce vyhovuje (v媒b臎r lze po instalaci\n"
+"samoz艡ejm臎 zm臎nit). Na monitoru bude zobrazena p艡铆klad nastaven铆.\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" Syst茅m se pokus铆 otestovat grafickou obrazovku v po啪adovan茅m rozli拧en铆.\n"
+"Pokud b臎hem testu uvid铆te zpr谩vy a odpov铆te na ni \"Ano\", instala膷n铆 "
+"program\n"
+"bude pokra膷ovat dal拧铆m krokem. Pokud zpr谩vu neuvid铆te, znamen谩 to, 啪e "
+"n臎kter谩\n"
+"膷谩st automatick茅 detekce neprob臎hla v po艡谩dku a test automaticky za 12 "
+"vte艡in\n"
+"skon膷铆 s t铆m, 啪e se provede n谩vrat k z谩kladn铆 nab铆dce. N谩sledn臎 je mo啪n茅 "
+"op臎t\n"
+"prov茅st zm臎ny a啪 do t茅 doby, ne啪 bude zobrazeno spr谩vn茅 rozli拧en铆.\n"
+"\n"
+"\n"
+"Volby\n"
+"\n"
+" Zde si m暖啪ete vybrat, zda chcete prov茅st automatick媒 start grafick茅ho\n"
+"prost艡ed铆 po spu拧t臎n铆 syst茅mu. Je samoz艡ejm茅, 啪e pokud bude po膷铆ta膷 "
+"provozov谩n\n"
+"jako server, je nutn茅 odpov臎d臎t \"Ne\"."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "拧铆艡ka textu"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Kam chcete p艡ipojit za艡铆zen铆 %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "V媒choz铆 doba pron谩jmu (sekundy)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Rozhran铆 \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Z谩kladn铆 dokumentace (doporu膷eno!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 tla膷铆tko"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Syst茅mov茅 soubory:\n"
+"Na拧el jsem %d nezn谩m媒ch tisk谩ren p艡铆mo p艡ipojen媒ch k va拧emu po膷铆ta膷i"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumenty: (arg)\n"
"\n"
-"Zdroje pro z谩lohu:\n"
+"Povol铆/Zak谩啪e p艡铆m茅 p艡ihl谩拧en铆 u啪ivatele root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Vybrat u啪ivatele manu谩ln臎"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Z谩lohovat u啪ivatele"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Va拧e volba? (v媒choz铆 '%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Z谩lohovat syst茅m"
+msgid "Raw printer"
+msgstr "P艡铆m媒 tisk na tisk谩rnu"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Pros铆m vyberte si, co chcete z谩lohovat"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Ofici谩ln铆 jm茅no dodavatele procesoru"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "na p谩sku"
+msgid "Vendor"
+msgstr "Dodavatel"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "na CDROM"
+msgid "Interface %s"
+msgstr "Rozhran铆 %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "p艡es s铆钮"
+msgid "Configure mouse"
+msgstr "Nastaven铆 my拧i"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "na pevn媒 disk"
+msgid "Choose the mount points"
+msgstr "Zvolte si p艡铆pojn茅(mount) body"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Vyberte si, pros铆m, kam chcete z谩lohovat."
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Dal拧铆 volby"
+msgid "Yugoslavian (latin)"
+msgstr "Jugosl谩vsk茅 (latin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Kdy"
+msgid "Installing"
+msgstr "Instaluji"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Kde"
+msgid "Launch userdrake"
+msgstr "Spustit UserDrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Co"
+msgid "Is this an install or an upgrade?"
+msgstr "Je to instalace nebo aktualizace?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Smazat pomocn茅 tar soubory po z谩loze na jin茅 m茅dium."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Intern铆 ISDN karta"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Poslat report po z谩loze mailem na :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Chcete-li sd铆let sv茅 v臎domosti a pom谩hat vytv谩艡et n谩stroje pro Linux, "
+"p艡ipojte se do diskusn铆ch klub暖, kter茅 najdete na na拧ich str谩nk谩ch "
+"\"Community\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Ujist臎te se pros铆m, 啪e mezi slu啪bami je p艡铆tomen cron d茅mon.\n"
+"Gratulujeme, konfigurace s铆t臎 a internetu je ukon膷ena.\n"
"\n"
-"V tuto chv铆li tak茅 v拧echna 's铆钮ov谩' m茅dia pou啪铆vaj铆 pevn媒 disk."
+"Konfigurace bude nyn铆 aktivov谩na.\n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Pevn媒 disk.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Pros铆m zvolte si\n"
-"m茅dium pro z谩lohy."
+"Tento krok je objev铆 pouze tehdy, pokud je na va拧em po膷铆ta膷i nalezen star拧铆\n"
+"odd铆l GNU/Linuxu.\n"
+"\n"
+"Instala膷n铆 program pot艡ebuje v臎d臎t, zda m谩 prov茅st instalaci nebo pouze\n"
+"aktualizaci existuj铆c铆ho syst茅mu Mandrake Linux.\n"
+"\n"
+" * \"Instalace\": Nejb臎啪n臎j拧铆 volba, provede kompletn铆 v媒maz star茅ho "
+"syst茅mu.\n"
+"Pokud si p艡ejete zm臎nit rozm铆st臎n铆 odd铆l暖, zm臎nit souborov媒 syst茅m, "
+"pou啪ijte\n"
+"tuto volbu. M暖啪ete samoz艡ejm臎 tak茅 n臎kter茅 odd铆ly zachovat p艡ed p艡eps谩n铆m.\n"
+"\n"
+" * \"Aktualizace\": tato volba provede aktualizaci instalovan媒ch bal铆膷k暖.\n"
+"Aktu谩ln铆 rozm铆st臎n铆 diskov媒ch odd铆l暖 a u啪ivatelsk谩 data z暖stanou zachov谩na.\n"
+"Bude provedena ale v臎t拧ina konfigura膷n铆ch krok暖, stejn臎 jako p艡i instalaci.\n"
+"\n"
+"Pou啪it铆 volby \"Aktualizace\" bude fungovat bez probl茅m暖 na st谩vaj铆c铆 "
+"verzi \n"
+"\"8.1\" a nov臎j拧铆. Aktualizace na verz铆ch star拧铆ch ne啪 \"8.1\" nen铆 "
+"doporu膷ov谩no."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Tisk谩rna na vzd谩len茅m CUPS serveru"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Vyberte si interval mezi\n"
-"jednotliv媒mi z谩lohami"
+"Odebr谩n铆 tisk谩rny \"%s\" ze Star Office/OpenOffice.org/GIMP se nezda艡ilo."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Pou啪铆t d茅mona"
+msgid "delete"
+msgstr "smazat"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "ka啪d媒 m臎s铆c"
+msgid "here if no."
+msgstr "zde pokud si nejste jisti."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "ka啪d媒 t媒den"
+msgid "DHCP host name"
+msgstr "N谩zev po膷铆ta膷e z DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "ka啪d媒 den"
+msgid "The maximum lease (in seconds)"
+msgstr "Maxim谩ln铆 doba pron谩jmu (sekundy)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "ka啪dou hodinu"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Ke kter茅mu s茅riov茅mu portu je p艡ipojena va拧e my拧?"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Pevn媒 disk / NFS"
+msgid "Did it work properly?"
+msgstr "Prob臎hl tisk spr谩vn臎 ?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CD-ROM / DVD-ROM"
+msgid "Poor"
+msgstr "Slab谩"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Zadejte adres谩艡, kam se bude ukl谩dat:"
+msgid "The DHCP start range"
+msgstr "Po膷谩tek p谩sma adres DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
-"Pokud chcete po z谩lohov谩n铆 p谩sku automaticky vysunout, pros铆m zatrhn臎te."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"Pokud chcete p艡ed z谩lohov谩n铆m va拧i p谩sku nejd艡铆ve smazat, pros铆m zatrhn臎te"
+msgid "Unsafe"
+msgstr "Nejist媒"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s sektor暖"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Ne"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Pokud chcete pou啪铆vat za艡铆zen铆 bez zp臎tn茅ho p艡ev铆jen铆, pros铆m zatrhn臎te."
+"Je va拧e tisk谩rna multifunk膷n铆 za艡铆zen铆 od HP nebo od Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 se skenerem, Sony IJP-V100) nebo HP "
+"PhotoSmart 膷i HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Zadejte n谩zev za艡铆zen铆, na kter茅 se bude z谩lohovat"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Pou啪铆t p谩skovou jednotku"
+msgid "could not find any font.\n"
+msgstr "nelze nal茅zt 啪谩dn媒 font.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Nen铆 definov谩no 啪谩dn茅 za艡铆zen铆 CD!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Chcete, aby se kl谩vesa Backspace chovala v konzoli jako Delete?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Zadejte n谩zev va拧铆 vypalova膷ky CD\n"
-" nap艡.: 1,0,0"
+msgid "Vertical refresh rate"
+msgstr "Vertik谩ln铆(obrazovkov谩) synchronizace"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Zvolte pokud pou啪铆v谩te za艡铆zen铆 DVD-RAM"
+msgid "Entering step `%s'\n"
+msgstr "Za膷铆n谩m '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Zvolte pokud pou啪铆v谩te za艡铆zen铆 DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Vymazat nyn铆 "
+msgid "Removing %s ..."
+msgstr "Odstra艌uji %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Zatrhn臎te, pokud chcete va拧e CDRW m茅dium smazat (p艡i prvn铆m sezen铆)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Zvolte pokud pou啪铆v谩te CDRW m茅dia"
+msgid "No printer"
+msgstr "Bez tisk谩rny"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Zvolte pokud pou啪铆v谩te multisession CD"
+msgid "alert configuration"
+msgstr "nastaven铆 varov谩n铆"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Vyberte velikost va拧eho m茅dia CD/DVD"
+msgid "NetWare Printer Options"
+msgstr "Mo啪nosti NetWare tisk谩rny"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Vyberte pros铆m sv茅 za艡铆zen铆 CD/DVD.\n"
-"(Stisknut铆m kl谩vesy Enter p艡enesete nastaven铆 do ostatn铆ch pol铆.\n"
-"Toto pol铆膷ko nen铆 povinn茅, je to pouze n谩stroj pro vypln臎n铆 formul谩艡e.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "N谩hled t茅matu Bootsplash %s (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Pou啪铆t pro z谩lohov谩n铆 CD/DVD-ROM"
+msgid "General"
+msgstr "Obecn茅"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Pot艡ebuji n谩zev po膷铆ta膷e, u啪ivatelsk茅 jm茅no a heslo!"
+msgid "Printing system: "
+msgstr "Tiskov媒 syst茅m: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Pamatovat si heslo"
+msgid "Add a user"
+msgstr "P艡id谩n铆 u啪ivatele"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "Zadejte sv茅 heslo"
+msgid "Network configuration (%d adapters)"
+msgstr "Nastaven铆 s铆t臎 (%d adapt茅ry(暖))"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Zadejte sv茅 p艡ihla拧ovac铆 jm茅no"
+msgid "Mandatory package %s is missing"
+msgstr "Chyb铆 pot艡ebn媒 bal铆膷ek %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Pros铆m, zadejte adres谩艡 (nebo modul), do kter茅ho\n"
-" bude um铆st臎na z谩loha na tomto po膷铆ta膷i."
+msgid "Philippines"
+msgstr "Filip铆ny"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Zadejte pros铆m n谩zev po膷铆ta膷e nebo IP."
+msgid "Ok"
+msgstr "Ok"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Jin茅 (ne pro drakbackup)\n"
-"kl铆膷e jsou ji啪 na m铆st臎"
+msgid "Print Queue Name"
+msgstr "N谩zev tiskov茅 fronty"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Chcete pou啪铆t aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "B臎lorusk茅"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" P艡enos \n"
-"Nyn铆"
+"PDQ podporuje pouze m铆stn铆 tisk谩rny, vzd谩len茅 tisk谩rny LPD a tisk na "
+"tisk谩rny p艡es sokety/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "P艡esunout soubory na nov媒 diskov媒 odd铆l"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Vytvo艡it/P艡en茅st\n"
-"z谩lo啪n铆 kl铆膷e pro SSH"
+"P艡idejte sem ty CUPS servery, ze kter媒ch budete cht铆t vyu啪铆vat tisk谩rny. Je "
+"to nutn茅 pouze v p艡铆pad臎, 啪e tyto servery ne拧铆艡铆 informace informace o "
+"tisk谩rn谩ch v lok谩ln铆 s铆ti."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Pou啪铆t Expect pro SSH"
+msgid "Restore From Catalog"
+msgstr "Obnovit z katalogu"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "S铆钮ov谩 metoda:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Pou啪铆t s铆钮ov茅 p艡ipojen铆 pro z谩lohov谩n铆"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "U啪ivatel茅"
+msgid "group :"
+msgstr "skupina :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "p艡ipojen铆 odd铆lu %s v adres谩艡i %s selhalo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Pou啪铆t p艡铆r暖stkovou z谩lohu (nep艡episovat star拧铆 z谩lohy)"
+msgid "Lilo screen"
+msgstr "Obrazovka LiLo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Odstranit vybran茅"
+msgid "LILO with graphical menu"
+msgstr "LILO s grafickou nab铆dkou"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Nezahrnout cache prohl铆啪e膷e"
+msgid "Estimating"
+msgstr "Odhaduji"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Zvolte pros铆m v拧echny u啪ivatele, kter茅 chcete z谩lohovat."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Nem暖啪ete od-ozna膷it tento bal铆膷ek, proto啪e je u啪 nainstalovan媒"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Tato volba dovol铆 obnovit r暖zn茅 verze adres谩艡e /etc."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", tisk谩rna \"%s\" na SMB/Windows serveru \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnout kritick茅 soubory (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "P艡esto pokra膷ovat?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Pou啪铆t p艡铆r暖stkovou z谩lohu (nep艡episovat star拧铆 z谩lohy)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Hled谩m dostupn茅 bal铆膷ky a znovu sestavuji datab谩zi bal铆膷k暖..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Z谩lohovat va拧e syst茅mov茅 soubory. (adres谩艡 /etc)"
+msgid "Does not appear to be recordable media!"
+msgstr "Toto nen铆 zapisovateln茅 m茅dium"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Tato volba zaz谩lohuje a obnov铆 v拧echny soubory v adres谩艡i /etc.\n"
+msgid "Specify options"
+msgstr "Zadejte mo啪nosti"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Mus铆 b媒t zad谩n bu膹 n谩zev serveru nebo jeho IP adresa!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Pomoc铆 startovac铆 diskety je mo啪n茅 spustit syst茅m Linux bez z谩vislosti na\n"
+"zavad臎膷i syst茅mu. To je u啪ite膷n茅 t艡eba v p艡铆pad臎, 啪e nechcete instalovat "
+"SILO\n"
+"na po膷铆ta膷, nebo jin媒 opera膷n铆 syst茅m SILO p艡epsal nebo SILO nepracuje "
+"spr谩vn臎\n"
+"s hardwarovou konfigurac铆. Vlastn铆 startovac铆 disketa je tak茅 u啪ite膷n谩 "
+"tehdy,\n"
+"pokud je pot艡eba prov茅st opravu syst茅mu po p艡edchoz铆m selh谩n铆.\n"
"\n"
-"Zvolte pros铆m v拧echny volby, kter茅 pot艡ebujete.\n"
+"Pokud chcete vytvo艡it startovac铆 disketu, vlo啪te disketu do mechaniky\n"
+"a stiskn臎te \"OK\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vyberte soubory nebo adres谩艡e a klepn臎te na 'P艡idat'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Nelze pou啪铆t kryptovan媒 souborov媒 syst茅m na p艡ipojen媒 bod %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "V媒b臎r souboru"
+msgid "Norfolk Island"
+msgstr "Norfolk Island"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Nelze vytvo艡it katalog!"
+msgid "Theme installation failed!"
+msgstr "Instalace t茅mata selhala!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Chyba p艡i pos铆l谩n铆 po拧ty. \n"
+msgid "Nothing to do"
+msgstr "Nic ned臎lat"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze p谩sku:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Pou啪铆t loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "N谩stroj spole膷nosti Mandrake pro hl谩拧en铆 chyb"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "pou啪铆t pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "P艡esunuji soubory na nov媒 diskov媒 odd铆l"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s s EXPERIMENT脕LN脥 3D hardwarovou akcelerac铆"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Roz拧铆艡en铆"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "P艡en茅st"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvo艡谩k (艩v茅dsk茅) "
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Probl茅my FTP spojen铆: Nebylo mo啪n茅 poslat va拧e soubory se z谩lohou p艡es "
-"FTP.\n"
+msgid "More Options"
+msgstr "Dal拧铆 volby"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afgh谩nist谩n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Smazat pomocn茅 tar soubory po z谩loze na jin茅 m茅dium."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"seznam soubor暖 poslan媒 p艡es FTP: %s\n"
-" "
+"cron je standardn铆 Unixov媒 program kter媒 spou拧t铆 u啪ivatelem zadan茅 programy\n"
+"v p艡edem definovan媒ch intervalech. vixie cron m谩 nav铆c mnoho vlastnost铆,\n"
+"v膷etn臎 vy拧拧铆 bezpe膷nosti a v铆ce mo啪nost铆 nastaven铆."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Nejsou 啪谩dn茅 zm臎ny pro z谩lohov谩n铆!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Z谩lo啪n铆 soubory pevn茅ho disku..."
+msgid "Add Client -->"
+msgstr "P艡idat klienta -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Z谩lohovat dal拧铆 soubory..."
+msgid "Read carefully!"
+msgstr "膶t臎te pozorn臎!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Pr暖b臎h z谩lohov谩n铆 na pevn媒 disk... "
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Z谩lohovat soubory u啪ivatel暖..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Zadejte pros铆m\n"
+"typ TV normy a zemi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Z谩lohovat syst茅mov茅 soubory..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Nen铆 p谩ska v %s!"
+msgid "No (experts only)"
+msgstr "Ne (pouze pro experty)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Probl茅my s pr谩vy p艡i p艡铆stupu na CD."
+msgid "No kernel selected!"
+msgstr "Nebylo zvoleno 啪谩dn茅 j谩dro!"
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Vymaz谩n铆 m茅dia m暖啪e chv铆li trvat."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Stisknete ENTER pro start vybran茅ho OS, 'e' pro upravu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Toto nen铆 p艡episovateln茅 m茅dium!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Toto nen铆 zapisovateln茅 m茅dium"
+msgid "The encryption keys do not match"
+msgstr "艩ifrovac铆 kl铆膷e se neshoduj铆"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "V mechanice nen铆 CDR/DVDR m茅dium."
+msgid "Right \"Windows\" key"
+msgstr "Prav谩 kl谩vesa \"Windows\""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "P艡enos protokolem WebDAV selhal!"
+msgid "CDROM / DVDROM"
+msgstr "CD-ROM / DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Vzd谩len谩 m铆sto je ji啪 protokolem WebDAV synchronizov谩no!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "pokud je nastaveno, kontroluje pr谩zdn谩 hesla v /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Celkov媒 pr暖b臎h"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"P艡edt铆m, ne啪 budete pokra膷ovat, p艡e膷t臎te si pozorn臎 podm铆nky licence. Ty\n"
+"se vztahuj铆 k cel茅 distribuci Mandrake Linux a pokud s nimi nesouhlas铆te,\n"
+"klepn臎te na tla膷铆tko \"Odm铆tnout\". Instalace ihned skon膷铆. Pokud chcete "
+"pokra膷ovat\n"
+"v instalaci, klepn臎te na tla膷铆tko \"P艡ijmout\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"P艡enos 煤sp臎拧n媒!\n"
-"Mo啪n谩 budete cht铆t zkontrolovat, zda se m暖啪ete p艡ihl谩sit na server:\n"
+"Zde je seznam dostupn媒ch voleb pro nastaven铆 tisku pro aktu谩ln铆 tisk谩rnu:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Rozli拧en铆"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"bez dotazu na heslo."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"Nastaven铆 aplikace drakfirewall\n"
+"\n"
+"Zde je mo啪n茅 nastavit osobn铆 firewall pro tento syst茅m Mandrake Linux.\n"
+"Pro v媒konn茅 艡e拧en铆 vyhrazen茅ho firewallu pou啪ijte specializovanou\n"
+"distribuci MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s neodpov铆d谩"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Pros铆m zadejte sv茅 u啪ivatelsk茅 jm茅no, heslo a n谩zev dom茅ny, pod kter媒mi "
+"chcete p艡istupovat k tomuto po膷铆ta膷i."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Nelze nal茅zt %s na %s"
+msgid "Remove selected host"
+msgstr "Odstranit vybran媒 po膷铆ta膷"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Povolen铆 odep艡eno p艡i p艡enosu %s na %s"
+msgid "Network configuration"
+msgstr "Nastaven铆 s铆t臎"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Chybn茅 heslo na %s"
+msgid "No sharing"
+msgstr "Nesd铆let"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "沤谩dn谩 v媒zva na heslo na %s na portu %s"
+msgid "Move selected rule down one level"
+msgstr "Posunout vybran茅 pravidlo o 煤rove艌 n铆啪e"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "CHYBA: Nelze spustit p艡铆kaz %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Generov谩n铆 kl铆膷暖 m暖啪e chv铆li trvat."
+msgid "Please check if you are using a DVDR device"
+msgstr "Zvolte pokud pou啪铆v谩te za艡铆zen铆 DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existuje, smazat?\n"
-"\n"
-"Varov谩n铆: Pokud jste tak ji啪 jednou u膷inili, budete nejsp铆拧 muset\n"
-"vymazat p艡铆slu拧n媒 z谩znam ze souboru authorized_keys na serveru."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP server dovoluje dal拧铆m po膷铆ta膷暖m spu拧t臎n铆 pomoc铆 PXE s vyu啪it铆m dan茅ho "
+"rozsahu adres.\n"
"\n"
-" Detaily o reportu pro DrackBackup\n"
-"\n"
+"S铆钮ov谩 adresa je %s a pou啪it谩 maska je %s\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Smazat"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumenty: (arg)\n"
"\n"
-" Report d茅monu pro DrackBackup\n"
-"\n"
-"\n"
+"Povol铆/Zak谩啪e reboot s konsole proveden茅 u啪ivatelem."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Report programu DrackBackup \n"
-"\n"
+"M暖啪u nastavit v谩拧 po膷铆ta膷 tak, aby automaticky spustil X p艡i startu.\n"
+"Chcete aby po膷铆ta膷 po zapnut铆 spustil grafick媒 re啪im?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Vytvo艡it disk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Odpojit %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "VAROV脕N脥"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Slu啪by cronu nejsou zat铆m pro b臎啪n茅 u啪ivatele dostupn茅."
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalace %s neusp臎la. Stala se tato chyba:"
+msgid "SSH Server"
+msgstr "Server SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ne, nechci automatick茅 p艡ihl谩拧en铆"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-S铆t铆 p艡es rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatick茅 p艡ihl谩拧en铆 s t铆mto (u啪ivatelem, desktopem)"
+msgid "European protocol"
+msgstr "Evropsk媒 protokol"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Spustit grafick茅 prost艡ed铆 p艡i startu syst茅mu"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", tisk谩rna \"%s\" na serveru \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Syst茅mov媒 re啪im"
+msgid "Error"
+msgstr "Chyba"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "povolit \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Obrazovka LiLo"
+msgid "Australia"
+msgstr "Austr谩lie"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Vyberte t茅ma pro\n"
-"LiLo a Bootsplash,\n"
-"m暖啪ete je vybrat\n"
-"ka啪d茅 zvl谩拧钮"
+msgid "please wait during ttmkfdir..."
+msgstr "膷ekejte pros铆m, pr谩v臎 b臎啪铆 ttmkfdir... "
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "T茅mata"
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigurovat pouze kartu \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "V媒b臎r zav谩d臎c铆ho obr谩zku"
+msgid "Level"
+msgstr "脷rove艌"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jako spr谩vce zav谩d臎n铆 nyn铆 pou啪铆v谩te %s.\n"
-"Pokud chcete spustit pr暖vodce nastaven铆m, klepn臎te na Nastavit."
+msgid "Change the printing system"
+msgstr "Zm臎na tiskov茅ho syst茅mu"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Instalace t茅mat pro LiLo a Bootsplash provedena 煤sp臎拧n臎!"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"V谩拧 syst茅m podporuje zobrazen铆 na dvou monitorech.\n"
+"Co chcete d臎lat?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Instalace t茅mata selhala!"
+msgid "Configure services"
+msgstr "Nastaven铆 slu啪eb"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Pozn谩mka"
+msgid "Broadcast Address:"
+msgstr "Adresa broadcastu:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Znovu spustit 'lilo'"
+msgid "mount failed: "
+msgstr "chyba p艡ipojov谩n铆: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Nelze znovu spustit LiLo!\n"
-"Chcete-li dokon膷it instalaci t茅matu pro LiLo, spus钮te na p艡铆kazov茅 艡谩dce "
-"\"lilo\" jako u啪ivatel root."
+"GNU/Linux j谩dro pot艡ebuje spustit v媒po膷etn铆 smy膷ku p艡i spu拧t臎n铆 pro "
+"inicializaci 膷铆ta膷e hodin. V媒sledek je ulo啪en v prom臎nn茅 BogoMIPS jako "
+"takov媒 \"benchmark\" pro cpu."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Prov茅st initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Obraz(image)"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Nelze spustit mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"P艡id谩n铆 tisk谩rny \"%s\" do Star Office/OpenOffice.org/GIMP se nezda艡ilo."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Vzd谩len谩 administrace"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Nelze zapsat soubor /etc/sysconfig/bootsplash\n"
-"Soubor nebyl nalezen."
+"Podpora PCMCIA ji啪 nen铆 dostupn谩 pro kernely 2.2. Pou啪ijte pros铆m 艡adu 2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Zapsat %s"
+msgid "Selected All"
+msgstr "Vybrat v拧e"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Nelze zapsat soubor /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Tiskov媒 Syst茅m pro Unix"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Zpr谩va LiLo nebyla nalezena"
+msgid "Webmin Service"
+msgstr "Slu啪ba Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kop铆ruji %s do %s"
+msgid "device"
+msgstr "za艡铆zen铆"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Z谩lohuji %s do %s.old"
+msgid "All"
+msgstr "V拧echno"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Vytvo艡it nov茅 t茅ma"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Kter媒 tiskov媒 syst茅m chcete pou啪铆t pro tisk?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Zobrazit t茅ma\n"
-"na konzoli"
+msgid "Greece"
+msgstr "艠ecko"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Instalovat t茅mata"
+msgid "An error occurred"
+msgstr "Stala se chyba"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Re啪im Lilo/Grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Tento bal铆膷ek mus铆 b媒t obnoven\n"
+"Jste si jisti, 啪e ho nechcete zvolit?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Re啪im Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamilsk茅 (psac铆 stroj)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>K"
+msgid "manual"
+msgstr "ru膷n臎"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Soubor/U_kon膷it"
+msgid "Printer manufacturer, model, driver"
+msgstr "V媒robce tisk谩rny, model, ovlada膷"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Soubor"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"V za艡铆zen铆 %s nen铆 啪谩dn茅 m茅dium, nebo je m茅dium chr谩n臎no proti z谩pisu.\n"
+"Vlo啪te pros铆m n臎jak茅."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Nastaven铆 stylu zav谩d臎n铆"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Adres谩艡 %s ji啪 obsahuje n臎jak谩 data\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Nen铆 k dispozici 啪谩dn媒 prohl铆啪e膷! Pros铆m nainstalujte n臎jak媒."
+msgid "Printer on NetWare server"
+msgstr "Tisk谩rna na Netware serveru"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "p艡ipojuji se k pr暖vodci Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "Zadejte velikost pam臎ti v MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Bal铆膷ek nen铆 nainstalov谩n"
+msgid "Real name"
+msgstr "Skute膷n茅 jm茅no"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Nen铆 instalov谩no"
+msgid "done"
+msgstr "hotovo"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Samostatn茅 n谩stroje"
+msgid "Please uncheck or remove it on next time."
+msgstr "Zru拧te tuto volbu p艡i dal拧铆m spu拧t臎n铆."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Hl谩拧en铆"
+msgid "Higher"
+msgstr "Vysok谩"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Zvolte diskov茅 odd铆ly kter茅 chcete naform谩tovat"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"V po膷铆ta膷i nebyla nalezena 啪谩dn谩 TV karta. Zkontrolujte pros铆m, zda "
+"podporovan谩 karta je spr谩vn臎 zapojena.\n"
"\n"
"\n"
-"Chcete-li poslat hl谩拧en铆 o chyb臎, klepn臎te na tla膷铆tko pro nahl谩拧en铆 chyby.\n"
-"Otev艡e se okno prohl铆啪e膷e s铆t臎 Internet na adrese https://drakbug."
-"mandrakesoft.com,\n"
-"kde najdete formul谩艡 k vypln臎n铆. V媒拧e zobrazen茅 informace budou na tento "
-"server\n"
-"rovn臎啪 p艡eneseny.\n"
+"Datab谩zi hardware lze nal茅zt na:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Verze: "
+msgid "Can't find %s on %s"
+msgstr "Nelze nal茅zt %s na %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "J谩dro: "
+msgid "Japanese 106 keys"
+msgstr "Japonsk谩 106 kl谩ves"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Bal铆膷ek: "
+msgid "This will take a few minutes."
+msgstr "Bude to trvat n臎kolik minut."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplikace:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Pr暖vodci nastaven铆m"
+msgid "Use scanners on remote computers"
+msgstr "Pou啪铆t skenery na vzd谩len茅m po膷铆ta膷i"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "UserDrake"
+msgid "Delete selected rule"
+msgstr "Smazat vybran茅 pravidlo"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "N谩stroj pro migraci z Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "P艡铆stup k tisk谩rn谩m na vzd谩len茅m CUPS serveru"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Vlo啪te disketu do %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Spr谩vce software"
+msgid "Maldives"
+msgstr "Maledivy"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Vzd谩len茅 ovl谩d谩n铆"
+msgid "compact"
+msgstr "kompaktn铆"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuta"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "na kan谩le %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", multifunk膷n铆 za艡铆zen铆"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "N谩stroj na synchronizaci"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Nejsou zde 啪谩dn茅 FAT odd铆ly, kter茅 by bylo mo啪n茅 zm臎nit (nebo nen铆 dostatek "
+"m铆sta)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Pr暖vodce pro nov茅 u啪ivatele"
+msgid "Up"
+msgstr "Nahoru"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Ovl谩dac铆 centrum Mandrake"
+msgid "Firewall"
+msgstr "Firewall"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "N谩stroj spole膷nosti Mandrake pro hl谩拧en铆 chyb"
+msgid "Area:"
+msgstr "Oblast :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametry"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontrol茅r"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace p艡ipojen铆 k internetu"
+msgid "Printer Server"
+msgstr "Tiskov媒 server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP klient"
+msgid "Disconnection from the Internet complete."
+msgstr "Odpojen铆 z Internetu ukon膷eno."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernetov谩 karta"
+msgid "Custom configuration"
+msgstr "Vlastn铆 nastaven铆"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Br谩na(gateway)"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Ur膷ete, kde je um铆st臎n instala膷n铆 obraz.\n"
+"\n"
+"Pokud nem谩te ji啪 existuj铆c铆 adres谩艡, zkop铆rujte pros铆m obsah CD nebo DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Typ p艡ipojen铆:"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre a Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Probl茅my p艡i obnov臎:\n"
+"\n"
+"P艡i obnovov谩n铆 DrakBackup nejd艡铆ve ov臎艡uje v拧echny\n"
+"z谩lohovan茅 soubory.\n"
+"P艡ed t铆m, ne啪 je soubor obnoven, provede DrakBackup v媒maz\n"
+"p暖vodn铆ho souboru, a tak p艡ijdete o v拧echna data.\n"
+"Bu膹te proto opatrn铆 a nesna啪te se modifikovat z谩lohovan谩\n"
+"data ru膷n臎.\n"
+"\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfigurace p艡ipojen铆 k internetu"
+msgid "saving Bootsplash theme..."
+msgstr "ukl谩d谩m Bootsplash t茅ma..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nem谩te 啪谩dn茅 p艡ipojen铆 k Internetu.\n"
-"Vytvo艡te si jej klepnut铆m na 'Konfigurovat'"
+msgid "Portugal"
+msgstr "Portugalsko"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhran铆 je拧t臎 nebylo nastaveno.\n"
-"Spus钮te pr暖vodce konfigurac铆 z hlavn铆ho okna"
+msgid "Do you have another one?"
+msgstr "M谩te je拧t臎 n臎jak茅 jin茅?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktivovat nyn铆"
+msgid ", printing to %s"
+msgstr ", p艡i tisku na %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktivovat nyn铆"
+msgid "Assign host name from DHCP address"
+msgstr "P艡i艡adit n谩zev po膷铆ta膷e ze z铆skan茅 DHCP adresy"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP klient"
+msgid "Toggle to normal mode"
+msgstr "P艡epnout se do m贸du 'norm谩ln铆'"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Spustit p艡i startu"
+msgid "Generic"
+msgstr "Obecn媒"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protokol o spu拧t臎n铆"
+msgid "Cylinder %d to %d\n"
+msgstr "Od cylindru %d do cylindru %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapt茅r %s: %s"
+msgid "New profile..."
+msgstr "Nov媒 profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Nastaven铆 LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "Na kter媒 disk chcete odd铆l p艡esunout?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Nastaven铆 LAN"
+msgid "Display logo on Console"
+msgstr "Zobrazit logo na konzoli"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nem谩te nakonfigurov谩no 啪谩dn茅 rozhran铆.\n"
-"Nastavte jej klepnut铆m na 'Konfigurovat'"
+msgid "Windows Domain"
+msgstr "Dom茅na Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "P艡ipojit..."
+msgid "Interface %s (on network %s)"
+msgstr "Rozhran铆 %s (na s铆ti %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Odpojit..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Nep艡ipojen"
+msgid "Wallis and Futuna"
+msgstr "Wallis a Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "P艡ipojen"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Je nutn茅 nejprve vytvo艡it soubor /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Varov谩n铆, bylo detekov谩no jin茅 p艡ipojen铆 k Internetu, z艡ejm臎 je to s铆钮"
+msgid "Is FPU present"
+msgstr "P艡铆tomnost FPU"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr "Rozhran铆:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Na va拧em po膷铆ta膷i nebyly nalezeny 啪谩dn茅 p艡ipojen茅 skenery.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Br谩na(gateway):"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Nejsou 啪谩dn茅 dal拧铆\n"
+"informace o slu啪b臎, promi艌te."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
-msgstr "Pou啪铆t"
+msgid "Build Single NIC -->"
+msgstr "Sestavit jedinou NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Klepn臎te pro spu拧t臎n铆 pr暖vodce ->"
+msgid "Is this correct?"
+msgstr "Je to spr谩vn臎?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Pr暖vodce..."
+msgid "Marshall Islands"
+msgstr "Marshall Islands"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "Typ:"
+msgid "Root password"
+msgstr "Hlavn铆(root) heslo"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "P艡铆stup na Internet"
+msgid "Build All Kernels -->"
+msgstr "Sestavit v拧echna j谩dra -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "N谩zev po膷铆ta膷e: "
+msgid "if set to yes, report unowned files."
+msgstr "pokud je nastaveno, vypisuje soubory bez vlastn铆ka."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Nastavuji lok谩ln铆 s铆钮..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Nem谩te odkl谩dac铆 odd铆l\n"
+"\n"
+"Chcete p艡esto pokra膷ovat?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Server IP missing!"
+msgstr "Chybn谩 IP adresa serveru!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Ovlada膷"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Enable ACPI"
+msgstr "Povolit ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "Rozhran铆"
+msgid "Graphical Environment"
+msgstr "Grafick茅 prost艡ed铆"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Nastavuji p艡铆stup na Internet..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
-msgstr "膶ekejte pros铆m"
+msgid "on Tape Device"
+msgstr "na p谩sku"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Zadejte n谩zev vytv谩艡en茅ho profilu (nov媒 profil je vytvo艡en jako kopie "
-"vybran茅ho) :"
+msgid "Do nothing"
+msgstr "Ned臎lat nic"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "Nov媒 profil..."
+msgid "Delete Client"
+msgstr "Odebrat klienta"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Smazat profil:"
+msgid "Filesystem type: "
+msgstr "Souborov媒 syst茅m: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Smazat profil..."
+msgid "Starting network..."
+msgstr "Spou拧t铆m s铆钮 ...."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastaven铆 s铆t臎 (%d adapt茅ry(暖))"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Spr谩vce p艡ihl谩拧en铆 pro X11 umo啪艌uje se p艡ihl谩sit p艡es grafick茅\n"
-"rozhran铆 k be啪铆c铆mu syst茅mu X Window a podporuje spu拧t臎n铆 r暖zn媒ch\n"
-"X sezen铆 na lok谩ln铆m po膷铆ta膷i sou膷asn臎."
+msgid "/_Fields description"
+msgstr "/_Popis polo啪ek"
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "V媒b臎r spr谩vce oken"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimalizujte va拧e zabezpe膷en铆"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"Nelze korektn臎 ukon膷it mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "N谩pov臎da"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Nelze prov茅st fork: %s"
+msgid "Your personal phone number"
+msgstr "Va拧e osobn铆 telefonn铆 膷铆slo"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Jakou velikost odd铆lu chcete nechat pro Windows na"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"V za艡铆zen铆 %s nen铆 啪谩dn茅 m茅dium, nebo je m茅dium chr谩n臎no proti z谩pisu.\n"
-"Vlo啪te pros铆m n臎jak茅."
+"Zku拧ebn铆 str谩nka byl posl谩na na tisk谩rnu.\n"
+"M暖啪e chvilku trvat ne啪 za膷ne tisk.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Zkontrolujte, zda v je za艡铆zen铆 %s vlo啪eno m茅dium"
+msgid "Username required"
+msgstr "Vy啪adov谩no u啪ivatelsk茅 jm茅no"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"Norm谩ln臎 zvol铆 instala膷n铆 program spr谩vnou kl谩vesnici na z谩klad臎 zvolen茅ho\n"
+"jazyka, tak啪e nen铆 pot艡eba nic v tomto kroku m臎nit. \n"
+"M暖啪e se ale st谩t, 啪e nem谩te kl谩vesnici, kter谩 odpov铆d谩 va拧emu jazyku: "
+"nap艡铆klad\n"
+"pokud jste anglicky hovo艡铆c铆 艩v媒car, stejn臎 chcete m铆t 拧v媒carskou "
+"kl谩vesnici.\n"
+"Nebo pokud mluv铆te anglicky, ale 啪ijete v Quebecu, je to stejn媒 p艡铆pad. V "
+"obou\n"
+"p艡铆padech se m暖啪ete vr谩tit na tento instala膷n铆 krok a vybrat si "
+"odpov铆daj铆c铆\n"
+"kl谩vesnici ze seznamu.\n"
+"\n"
+"Pokud m谩te kl谩vesnici pro jin媒 jazyk, klepn臎te na tla膷铆tko \"V铆ce\"\n"
+"a zobraz铆 se kompletn铆 seznam v拧ech podporovan媒ch rozlo啪en铆 kl谩vesnic.\n"
+"\n"
+"Pokud vyberete rozlo啪en铆 kl谩vesnice zalo啪en茅 na abeced臎 jin茅 ne啪 latince,\n"
+"budete v dal拧铆m dialogu vyzv谩ni k v媒b臎ru kl谩vesov茅 zkratky, kter谩 bude "
+"p艡ep铆nat\n"
+"rozlo啪en铆 kl谩vesnice mezi latinkou a v谩mi zvolen媒m rozlo啪en铆m."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Vytvo艡it disk"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Mo啪nosti SMB (Windows 9x/NT) tisk谩rny"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "V媒stup"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Akceptuje/odm铆tne nekorektn铆 chybov茅 IPv4 zpr谩vy."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Odebrat modul"
+msgid "mkinitrd optional arguments"
+msgstr "voliteln茅 argumenty pro mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "P艡idat modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Prohl铆啪ejte Web pomoc铆 prohl铆啪e膷e Mozilla nebo Konqueror, 膷t臎te po拧tu s "
+"Evolution nebo KMail, tvo艡te sv茅 dokumenty s OpenOffice.Org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "vynechat SCSI moduly"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol pou啪it媒 ve zbytku sv臎ta"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "pokud je pot艡eba"
+msgid "Print test pages"
+msgstr "Tisk testovac铆ch str谩nek"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "vynechat RAID moduly"
+msgid "64 MB or more"
+msgstr "64 MB nebo v铆ce"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "vnutit"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Vyberte si testovac铆 str谩nku, kterou chcete vytisknout.\n"
+"Pozn谩mka: tisk testovac铆 str谩nky s fotografi铆 m暖啪e trvat velmi dlouho nebo "
+"se na tisk谩rn臎 s m谩lo pam臎t铆 nemus铆 poda艡it v暖bec. Ve v臎t拧in臎 p艡铆pad暖 sta膷铆 "
+"vytisknout b臎啪nou testovac铆 str谩nku."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "voliteln茅 argumenty pro mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Vyberte pros铆m za艡铆zen铆, ke kter茅mu je skener %s p艡ipojen"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Expertn铆 nastaven铆"
+msgid "Not formatted\n"
+msgstr "Nenaform谩tovan媒\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "verze j谩dra"
+msgid "Periodic Checks"
+msgstr "Pravideln茅 kontroly"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "p艡edvolen茅"
+msgid "PXE Server Configuration"
+msgstr "Nastaven铆 PXE serveru"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Obecn茅"
+msgid "Backup the system files before:"
+msgstr "Z谩lohovat syst茅mov茅 soubory p艡ed:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "vytv谩艡en铆 zav谩d臎c铆ch disket"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Toto je standardn铆 煤rove艌 zabezpe膷en铆 pro po膷铆ta膷, kter媒 je pou啪铆v谩n jako "
+"klient pro p艡ipojen铆 k internetu."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "prvn铆 mechaniky"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Velikost"
+msgid "/File/_Quit"
+msgstr "/Soubor/U_kon膷it"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "N谩zev modulu"
+msgid "Dvorak"
+msgstr "Dvo艡谩k"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Nastaven铆 po odebr谩n铆"
+msgid "Choose the new size"
+msgstr "Zvolte novou velikost"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Odebrat fonty ze syst茅mu"
+msgid "Media class"
+msgstr "T艡铆da m茅di铆"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "脷vodn铆 testy"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Skener %s nen铆 zat铆m v t茅to verzi Scannerdrake podporov谩n."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Poinstala膷n铆 nastaven铆"
+msgid "Faroe Islands"
+msgstr "Faroe Islands"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalovat & konvertovat fonty"
+msgid "Restart XFS"
+msgstr "Restartovat XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kop铆rovat fonty do syst茅mu"
+msgid "Add host/network"
+msgstr "P艡idat po膷铆ta膷/s铆钮"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Odebrat seznam"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"pokud je nastaveno, kontroluje heslo, zda nen铆 pr谩zdn茅 heslo v /etc/shadow a "
+"u啪ivatele, kte艡铆 maj铆 id 0 jin铆 ne啪 u啪ivatel root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Vybrat v拧e"
+msgid "Please enter the directory to save to:"
+msgstr "Zadejte adres谩艡, kam se bude ukl谩dat:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Zru拧it cel媒 v媒b臎r"
+msgid "Model name"
+msgstr "N谩zev modelu"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "zde pokud si nejste jisti."
+msgid "Albania"
+msgstr "Alb谩nie"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "klepn臎te zde, pokud jste si jisti."
+msgid "No CDR/DVDR in drive!"
+msgstr "V mechanice nen铆 CDR/DVDR m茅dium."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Instalovat seznam"
+msgid "British Indian Ocean Territory"
+msgstr "Britsk茅 teritorium Indick茅ho mo艡e"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vyberte soubor s fontem nebo adres谩艡 a klepn臎te na 'P艡idat'"
+msgid "Normal Mode"
+msgstr "Norm谩ln铆 re啪im"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"P艡ed instalac铆 font暖 se ujist臎te, 啪e m谩te pot艡ebn谩 pr谩va na instalac铆 a "
-"pou啪铆v谩n铆 na syst茅mu.\n"
+"Ujist臎te se pros铆m, 啪e mezi slu啪bami je p艡铆tomen cron d茅mon.\n"
"\n"
-"- Fonty lze instalovat b臎啪n媒m zp暖sobem. Ve v媒jime膷n媒ch p艡铆padech m暖啪e 拧patn媒 "
-"font zp暖sobit zamrznut铆 X serveru."
+"V tuto chv铆li tak茅 v拧echna 's铆钮ov谩' m茅dia pou啪铆vaj铆 pevn媒 disk."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Obecn茅 tisk谩rny"
+msgid "Printer connection type"
+msgstr "Typ p艡ipojen铆 pro tisk谩rnu"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ve va拧em syst茅mu nen铆 啪谩dn媒 s铆钮ov媒 adapt茅r!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "S铆钮 %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Zvolte aplikace, kter茅 podporuj铆 fonty:"
+msgid "Option %s out of range!"
+msgstr "Hodnota %s je mimo rozsah!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright 漏2001-2002 MandrakeSoft \n"
-"\tDUPONT Sebastien (p暖vodn铆 verze)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" Tento program je svobodn媒 software; m暖啪ete ho 拧铆艡it a/nebo modifikovat\n"
-" podle specifikace GNU General Public Licence, kter谩 byla publikov谩na\n"
-" Free Software Foundation; bu膹 verze 2, nebo (podle volby) pozd臎j拧铆 verze.\n"
-"\n"
-" Tento program je distribuov谩n s nad臎j铆, 啪e bude u啪ite膷n媒,\n"
-" ale BEZ JAK脻CHKOLIV Z脕RUK; BEZ N脕ROKU NA PROFIT. V铆ce detail暖 naleznete\n"
-" v licenci GNU General Public Licence.\n"
-"\n"
-" Kopii GNU General Public Licence m暖啪ete obdr啪et bu膹 s t铆mto programem\n"
-" nebo si o n铆 m暖啪ete napsat na adresu Free Software Foundation, Inc.,\n"
-" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Pod臎kov谩n铆:\n"
-" - pfm2afm: \n"
-"\t autor Ken Borgendale:\n"
-"\t P艡ev谩d铆 Windows .pfm soubor na .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t autor James Macnicol: \n"
-"\t type1inst generuje soubory fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t auto艡i Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" P艡ev谩d铆 soubory s ttf fonty na soubory afm a pfb\n"
+msgid "Connect %s"
+msgstr "P艡ipojit %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "O aplikaci"
+msgid "Restarting CUPS..."
+msgstr "Restartuji CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Seznam font暖"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Tisk/Skenov谩n铆/Foto karty na \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Roz拧铆艡en茅 volby"
+msgid "Duplicate mount point %s"
+msgstr "Zdvojen媒 p艡铆pojn媒 bod %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Odinstalovat fonty"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "pokud je nastaveno, prov谩d铆 kontrolu na chkrootkit."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Na膷铆st fonty z Windows"
+msgid "Connection Configuration"
+msgstr "Nastaven铆 p艡ipojen铆"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Zav谩d臎n铆 font暖"
+msgid "Unknown|Generic"
+msgstr "Nezn谩m谩|Obecn谩"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Poka啪d茅, kdy啪 instalujete distribuci Mandrake Linux, je mo啪n茅, 啪e n臎kter茅\n"
+"bal铆膷ky byly od vyd谩n铆 distribuce aktualizov谩ny. Mohly to b媒t opravy chyb\n"
+"膷i 艡e拧en铆 mo啪n媒ch bezpe膷nostn铆ch probl茅m暖. Pokud chcete vyu啪铆t pr谩v臎\n"
+"t茅to nab铆dky, je mo啪n茅 tyto bal铆膷ky nyn铆 st谩hnout z Internetu. Zvolte \"Ano"
+"\"\n"
+"pokud m谩te funk膷n铆 p艡ipojen铆 na Internet nebo \"Ne\", pokud budete\n"
+"instalovat aktualizace pozd臎ji.\n"
+"\n"
+"Po zvolen铆 \"Ano\" se zobraz铆 seznam m铆st, odkud mohou b媒t aktualizace "
+"z铆sk谩ny.\n"
+"Vyberte si nejbli啪拧铆 m铆sto. N谩sledn臎 se objev铆 stromov媒 seznam bal铆膷k暖,\n"
+"kter媒 je mo啪no je拧t臎 upravit a stisknut铆m tla膷铆tka \"Instalovat\" se provede "
+"sta啪en铆\n"
+"a instalace vybran媒ch bal铆膷k暖. Akci m暖啪ete p艡eru拧it klepnut铆m na \"Zru拧it\"."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "hotovo"
+msgid "Quit"
+msgstr "Konec"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "restart xfs"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Ignorovat soubory s fonty"
+msgid "Auto allocate"
+msgstr "Automaticky rozm铆stit"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Restartovat XFS"
+msgid "Check bad blocks?"
+msgstr "Otestovat na vadn茅 stopy?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Ignorovat do膷asn茅 soubory"
+msgid "Other MultiMedia devices"
+msgstr "Dal拧铆 multimedi谩ln铆 za艡铆zen铆"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "vytv谩艡铆m type1inst"
+msgid "No remote machines"
+msgstr "Nejsou 啪谩dn茅 vzd谩len茅 po膷铆ta膷e"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "konverze pfm font暖"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"V铆tejte v Pr暖vodci nastaven铆m tisk谩rny\n"
+"\n"
+"Tento pr暖vodce v谩m pom暖啪e nainstalovat va拧i tisk谩rnu nebo tisk谩rny p艡ipojen茅 "
+"k tomuto po膷铆ta膷i.\n"
+"\n"
+"Pokud m谩te tisk谩rnu nebo tisk谩rny p艡ipojen茅 k tomuto po膷铆ta膷i, zapojte je "
+"pros铆m a zapn臎te je; pak mohou b媒t automaticky nalezeny. \n"
+"\n"
+"Pokud jste p艡ipraveni, klepn臎te na tla膷铆tko \"D谩le\", nebo klepn臎te na "
+"tla膷铆tko \"Zru拧it\" pokud nechcete v tuto chv铆li tisk谩rnu(y) nastavovat."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "konverze ttf font暖"
+msgid "Authentication NIS"
+msgstr "Ov臎艡en铆 pomoc铆 NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Volba ''Omezen铆 nastaven铆 z p艡铆kazov茅 艡谩dky'' je bezp艡edm臎tn茅 bez hesla"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konverze font暖"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je zapnuto"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "Instalace True Type font暖 je dokon膷ena"
+msgid "Card IO_0"
+msgstr "IO_0 karty"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "膷ekejte pros铆m, pr谩v臎 b臎啪铆 ttmkfdir... "
+msgid "United Arab Emirates"
+msgstr "Spojen茅 Arabsk茅 Emir谩ty"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalace p铆sem True Type"
+msgid "Card IO_1"
+msgstr "IO_1 karty"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopie fontu"
+msgid "Thailand"
+msgstr "Thajsko"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Hledat fonty mezi instalovan媒mi"
+msgid "Routers:"
+msgstr "Sm臎rova膷e:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "nelze nal茅zt 啪谩dn媒 font.\n"
+msgid "Kazakhstan"
+msgstr "Kazachst谩n"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Znovu vybrat spr谩vn茅 fonty"
+msgid "Display all available remote CUPS printers"
+msgstr "Zobrazit seznam v拧ech vzd谩len媒ch CUPS tisk谩ren"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "nelze nal茅zt 啪谩dn茅 fonty v p艡ipojen茅m odd铆le"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Instalace %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "nebyly nalezeny 啪谩dn茅 fonty"
+msgid "Thai keyboard"
+msgstr "Thajsk茅"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "zpracov谩v谩m v拧echny fonty"
+msgid "Dialup options"
+msgstr "Mo啪nosti vyt谩膷en铆"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Odzna膷it instalovan茅 fonty"
+msgid "Bouvet Island"
+msgstr "Bouvet Island"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Hled谩m instalovan茅 fonty"
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Pokud nen铆 zad谩n 啪谩dn媒 port, bude jako v媒choz铆 pou啪it port 631."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"V铆t谩 v谩s pr暖vodce nastaven铆m sd铆len铆 p艡ipojen铆 k Internetu!\n"
+"Vym臎艌te pros铆m CD!\n"
"\n"
-"%s\n"
+"Pros铆m vlo啪te CD ozna膷en茅 \"%s\" do mechaniky a stiskn臎te Ok.\n"
"\n"
-"Klepn臎te na Konfigurovat, pokud chcete spustit pr暖vodce nastaven铆m."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Nastaven铆 sd铆len铆 p艡ipojen铆 k Internetu"
+"Pokud toto CD nem谩te, stiskn臎te Zru拧it a toto CD nebude nainstalov谩no."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nen铆 nastaveno 啪谩dn茅 sd铆len铆 Internetov茅ho p艡ipojen铆."
+msgid "Polish"
+msgstr "Polsk茅"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastaven铆 ji啪 bylo provedeno, nyn铆 je povoleno."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastaven铆 ji啪 bylo provedeno, ale nyn铆 je vypnuto."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-S铆t铆 p艡es WebDAV.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"V拧e se poda艡ilo nastavit.\n"
-"Nyn铆 lze pou啪铆t tento po膷铆ta膷 pro sd铆len铆 p艡ipojen铆 k Internetu pro va拧i "
-"lok谩ln铆 s铆钮, kter谩 pou啪铆v谩 automatickou konfiguraci s铆t臎 (DHCP)."
+"Ve va拧em po膷铆ta膷i nebyl nalezen 啪谩dn媒 s铆钮ov媒 adapt茅r. Spus钮te pros铆m program "
+"pro nastaven铆 hardware."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Probl茅m s instalac铆 bal铆膷ku %s"
+msgid "Netmask"
+msgstr "Maska s铆t臎"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
+msgid "No hard drives found"
+msgstr "Nenalezeny 啪谩dn茅 pevn茅 disky!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Nastavuji..."
+msgid "Logitech CC Series"
+msgstr "Logitech s茅rie CC (s茅riov谩)"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Na拧el jsem mo啪n媒 konflikt v sou膷asn茅m nastaven铆 LAN adresy pro %s!\n"
+msgid "2 buttons"
+msgstr "2 tla膷铆tka"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "膶铆slo lok谩ln铆 s铆t臎 nekon膷铆 na .0, zkou拧铆m znovu."
+msgid "What kind is your ISDN connection?"
+msgstr "Jak茅 je va拧e ISDN p艡ipojen铆?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "P艡enastaven铆 rozhran铆 a DHCP serveru"
+msgid "Label"
+msgstr "Zna膷ka"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maxim谩ln铆 doba pron谩jmu (sekundy)"
+msgid "Save on floppy"
+msgstr "Ulo啪it na disketu"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "V媒choz铆 doba pron谩jmu (sekundy)"
+msgid "Printer auto-detection"
+msgstr "Autodetekce tisk谩rny"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Konec p谩sma adres DHCP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Kterou z t臎chto ISDN karet m谩te?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Po膷谩tek p谩sma adres DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS je obl铆ben媒 protokol pro sd铆len铆 soubor暖 p艡es s铆t臎 TCP/IP.\n"
+"Tato slu啪ba poskytuje NFS server, jeho啪 nastaven铆 je v /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Intern铆 n谩zev dom茅ny"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "IP adresa DNS serveru"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Oznamuji zm臎nu n谩v臎拧t铆:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Adresa DHCP serveru"
+msgid "Number of capture buffers:"
+msgstr "Po膷et buffer暖 pro zachycen铆 :"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Va拧e volba? (0/1, v媒choz铆 '%s') "
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Nastaven铆 DHCP serveru.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Zde m暖啪ete vybrat r暖zn茅 volby nastaven铆 DHCP serveru.\n"
-"Pokud nev铆te, co kter谩 volba znamen谩, ponechte jej铆 v媒choz铆 hodnotu.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresa lok谩ln铆 s铆t臎"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Mohu zachovat sou膷asn茅 nastaven铆 a p艡edpokl谩dat, 啪e m谩te ji啪 nastaven媒 DHCP "
-"server; v takov茅m p艡铆pad臎 ov臎艡te, 啪e je spr谩vn臎 p艡evzato nastaven铆 s铆t臎 "
-"odpov铆daj铆c铆 va拧铆 lok谩ln铆 s铆ti; nebude v n臎m provedena 啪谩dn谩 zm臎na a nebude "
-"ani zm臎n臎no nastaven铆 DHCP serveru.\n"
+"Ka啪d媒 nov臎 vytvo艡en媒 diskov媒 odd铆l mus铆 b媒t p艡ed pou啪it铆m zform谩tov谩n\n"
+"(form谩tov谩n铆m se mysl铆 vytvo艡en铆 souborov茅ho syst茅mu).\n"
"\n"
-"V媒choz铆 z谩znam DNS je vyrovn谩vac铆 jmenn媒 server (caching nameserver) "
-"nastaven媒 na va拧em firewallu. Tento z谩znam lze nahradit nap艡铆klad IP adresou "
-"va拧eho poskytovatele p艡ipojen铆 k Internetu.\n"
+"Nyn铆 lze form谩tovat ji啪 existuj铆c铆 diskov茅 odd铆ly pro vymaz谩n铆\n"
+"v拧ech dat, kter谩 obsahuj铆. Pokud to chcete prov茅st, vyberte diskov茅 odd铆ly\n"
+"pro p艡eform谩tov谩n铆.\n"
"\n"
-"Jinak mohu zm臎nit jak rozhran铆, tak tak茅 p艡enastavit DHCP server podle "
-"pot艡eby.\n"
+"Nen铆 ale nutn茅 p艡eform谩tovat v拧echny ji啪 existuj铆c铆 diskov茅 odd铆ly.\n"
+"Je nutn茅 p艡eform谩tovat odd铆ly, kter茅 obsahuj铆 opera膷n铆 syst茅m (jako je \"/"
+"\",\n"
+"\"/usr\" nebo \"/var\") ale nen铆 nutn茅 p艡eform谩tovat odd铆ly, kter茅 obsahuj铆\n"
+"data, kter谩 chcete zachovat (typicky /home).\n"
"\n"
+"P艡i v媒b臎ru diskov媒ch odd铆l暖, kter茅 se budou form谩tovat bu膹te opatrn铆, "
+"v拧echna\n"
+"data na form谩tovan媒ch odd铆lech budou ztracena a nelze je ji啪 obnovit.\n"
+"\n"
+"Pokud je v拧e p艡ipraveno pro form谩tov谩n铆, klepn臎te na \"D谩le ->\".\n"
+"\n"
+"Klepn臎te na \"Zp臎t\" pokud chcete vybrat jin茅 odd铆ly pro instalaci\n"
+"syst茅mu Mandrake Linux.\n"
+"\n"
+"Klepnut铆m na \"Roz拧铆艡en茅\" m暖啪ete vybrat, kter茅 odd铆ly budou otestov谩ny\n"
+"na vadn茅 bloky."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Francouzsk茅"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "膶esk茅 (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Prob铆h谩 detekce hardware"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "S铆钮ov茅 za艡铆zen铆"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Souhrn"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Aktu谩ln铆 konfigurace pro '%s':\n"
-"\n"
-"S铆钮: %s\n"
-"IP adresa: %s\n"
-"IP atributy: %s\n"
-"Ovlada膷: %s"
+" (Paraleln铆 porty: /dev/lp0, /dev/lp1,... je ekvivalentn铆 LPT1:, LPT2:, ...,"
+"prvn铆 USB tisk谩rna: /dev/usb/lp0, druh谩 USB tisk谩rna: /dev/usb/lp1,...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Aktu谩ln铆 nastaven铆 rozhran铆"
+msgid "Next"
+msgstr "Dal拧铆"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Zobrazit aktu谩ln铆 nastaven铆 rozhran铆"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Zav谩d臎c铆 program nelze nainstalovat na odd铆l %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ne (pouze pro experty)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatick茅 p艡enastaven铆"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Varov谩n铆, s铆钮ov媒 adapt茅r (%s) je ji啪 nastaven.\n"
"\n"
-"Chcete ho automaticky p艡enastavit?\n"
+"V铆tejte.\n"
"\n"
-"Lze to tak茅 prov茅st ru膷n臎, ale mus铆te v臎d臎t, co d臎l谩te."
+"Parametry pro automatickou instalaci jsou p艡铆stupn茅 v sekci nalevo"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "S铆钮ov茅 rozhran铆 je ji啪 nastaveno"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Pros铆m zvolte si, ke kter茅mu s铆钮ov茅mu adapt茅ru bude p艡ipojena LAN."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"pro spr谩vnou funkci je po啪adov谩n bal铆膷ek ImageMagick.\n"
+"Bal铆膷ek nainstalujete tla膷铆tkem \"OK\", nebo skon膷ete tla膷铆tkem \"Zru拧it\"."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litevsk茅 \"膷铆seln谩 艡ada\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Na va拧em syst茅mu je nastaveno pouze jedno s铆钮ov茅 rozhran铆:\n"
+"N谩sleduj铆c铆 bal铆膷ky budou odebr谩ny pro umo啪n臎n铆 aktualizace syst茅mu: %s\n"
"\n"
-"%s\n"
"\n"
-"Na tomto adapt茅ru bude nastavena lok谩ln铆 s铆钮."
+"Opravdu chcete odebrat tyto bal铆膷ky?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "S铆钮ov茅 rozhran铆"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve va拧em po膷铆ta膷i nebyl nalezen 啪谩dn媒 s铆钮ov媒 adapt茅r. Spus钮te pros铆m program "
-"pro nastaven铆 hardware."
+msgid "NIS Domain"
+msgstr "NIS Dom茅na"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ve va拧em syst茅mu nen铆 啪谩dn媒 s铆钮ov媒 adapt茅r!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Soubory u啪ivatel暖:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Rozhran铆 %s"
+msgid "Antarctica"
+msgstr "Antarktida"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhran铆 %s (pou啪铆v谩 modul %s)"
+msgid "Mount options"
+msgstr "Volby pro p艡ipojen铆"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "S铆钮ov茅 za艡铆zen铆"
+msgid "Jamaica"
+msgstr "Jamajka"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Zadejte pros铆m n谩zev rozhran铆, kter茅 je p艡ipojeno k Internetu.\n"
-"\n"
-"P艡铆klady:\n"
-"\t\tppp+ pro modem nebo pro DSL p艡ipojen铆,\n"
-"\t\teth0 nebo eth1 pro p艡ipojen铆 p艡es kabel,\n"
-"\t\tippp+ pro isdn p艡ipojen铆.\n"
+"P艡i艡azuje p艡铆m谩 za艡铆zen铆 blokov媒m (nap艡铆klad diskov茅 odd铆ly)\n"
+"pro aplikace jako je Oracle nebo DVD p艡ehr谩va膷"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"V谩拧 po膷铆ta膷 bude nastaven pro sd铆len铆 sv茅ho p艡ipojen铆 k Internetu.\n"
-"Tato vlastnost umo啪艌uje p艡铆stup dal拧铆ch po膷铆ta膷暖 na lok谩ln铆 s铆ti k s铆ti "
-"Internet p艡es p艡ipojen铆 tohoto po膷铆ta膷e.\n"
-"\n"
-"P艡ed pokra膷ov谩n铆m se ujist臎te, 啪e jste nastavili va拧i s铆钮 a p艡ipojen铆 k "
-"Internetu pomoc铆 aplikace drakconnect.\n"
+"Argumenty: (arg, alert=1)\n"
"\n"
-"Pozn.: Pro nastaven铆 lok谩ln铆 s铆t臎 (LAN) pot艡ebujete vyhrazen媒 s铆钮ov媒 adapt茅r."
+"Povol铆/Zak谩啪e ochranu p艡ed spoofingem jmenn媒ch slu啪eb. Pokud\n"
+"je \\fIalert\\fP nastaveno, vyp铆拧e report do syslogu."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Sd铆len铆 Internetov茅ho P艡ipojen铆"
+msgid "Please wait, preparing installation..."
+msgstr "膶ekejte pros铆m, p艡ipravuji instalaci"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je nyn铆 zapnuto."
+msgid "Czech (QWERTZ)"
+msgstr "膶esk茅 (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Sledovat id s铆钮ov茅 karty (u啪ite膷n茅 u notebook暖)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "odm铆tnout"
+msgid "The port number should be an integer!"
+msgstr "膶铆slo portu mus铆 b媒t cel茅 膷铆slo!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "p艡ekonfigurovat"
+msgid "You must choose an image file first!"
+msgstr "Nejprve mus铆te vybrat soubor s obrazem!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "povolit"
+msgid "Restore from Hard Disk."
+msgstr "Obnovit z pevn茅ho disku."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetov茅 sd铆len铆 u啪 bylo nastaveno.\n"
-"Nyn铆 je vypnuto.\n"
-"\n"
-"Co chcete d谩le d臎lat?"
+msgid "Add to LVM"
+msgstr "P艡idat do LVMu"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je vypnuto"
+msgid "DNS server"
+msgstr "DNS server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je nyn铆 vypnuto."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad a Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD ani LprNG nepodporuj铆 IPP tisk谩rny.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "vypnout"
+msgid "simple"
+msgstr "jednoduch媒"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Sd铆len铆 internetov茅ho p艡ipojen铆 u啪 bylo nastaveno.\n"
-"Nyn铆 je povoleno.\n"
-"\n"
-"Co chcete d谩le d臎lat?"
+msgid "Clear all"
+msgstr "V拧e smazat"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je zapnuto"
+msgid "No test pages"
+msgstr "Bez testovac铆 str谩nky"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Omlouv谩me se, ale podporujeme pouze j谩dra 艡ady 2.4."
+msgid "Adapter %s: %s"
+msgstr "Adapt茅r %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandy (Malvinas)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Nezn谩m媒 model"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"V syst茅mu nen铆 instalov谩n 啪谩dn媒 prohl铆啪e膷. Pokud chcete pou啪铆vat n谩pov臎du, "
-"je nutn茅 n臎jak媒 nainstalovat."
+"pokud je nastaveno, kontroluje, kter茅 soubory/adres谩艡e jsou zapisovateln茅 "
+"pro v拧echny."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Ov臎艡en铆"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Path"
-msgstr "Cesta"
+msgid "Backup Now"
+msgstr "Z谩lohovat nyn铆"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "group :"
-msgstr "skupina :"
+msgid "/_File"
+msgstr "/_Soubor"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user :"
-msgstr "u啪ivatel :"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Odeb铆r谩m tisk谩rnu ze Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Path selection"
-msgstr "V媒b臎r cesty"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Spustit paketov媒 filtr pro j谩dra 艡ady 2.2, kter媒 chr谩n铆 po膷铆ta膷\n"
+"proti 煤tok暖m ze s铆t臎."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "pokud za拧krtnuto, vlastn铆k a skupina nebudou zm臎n臎ny"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamilsk茅 (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Pou啪铆t p艡i spu拧t臎n铆 ID skupiny"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Pou啪铆t p艡i spu拧t臎n铆 ID vlastn铆ka"
+msgid "Creating auto install floppy..."
+msgstr "Vytv谩艡铆m disketu pro automatickou instalaci"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Pou啪ito pro adres谩艡:\n"
-" pouze vlastn铆k adres谩艡e nebo souboru v tomto adres谩艡i jej m暖啪e smazat"
+msgid "Searching for scanners ..."
+msgstr "Vyhled谩v谩m skenery..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Partitioning"
+msgstr "Rozd臎len铆 disku"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Russia"
+msgstr "Rusko"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "ethernet card(s) detected"
+msgstr "detekovan谩(茅) s铆钮ov谩(茅) karta(y)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Property"
-msgstr "Vlastnost"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permissions"
-msgstr "Opr谩vn臎n铆"
+msgid "Can't create catalog!"
+msgstr "Nelze vytvo艡it katalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Current user"
-msgstr "Aktu谩ln铆 u啪ivatel"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Dokon膷ete va拧e nastaven铆 bezpe膷nosti s t铆mto snadno pou啪iteln媒m software, "
+"kter茅 kombinuje velmi v媒konn茅 komponenty jako firewall, server a klient "
+"virtu谩ln铆 soukrom茅 s铆t臎 (VPN), syst茅m detekce pr暖niku a spr谩vce provozu."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "browse"
-msgstr "proch谩zet"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nen铆 dostatek m铆sta pro automatick茅 rozd臎len铆 disku"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Upravit sou膷asn茅 pravidlo"
+msgid "Set root password"
+msgstr "Hlavn铆(root) heslo"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "edit"
-msgstr "upravit"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Pro va拧i zvukovou kartu (%s) nen铆 啪谩dn媒 vhodn媒 voln臎 pou啪iteln媒 ovlada膷, ale "
+"existuje alternativn铆 propriet谩rn铆 ovlada膷 na \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Smazat vybran茅 pravidlo"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Kdy啪 zm臎n铆te velikost odd铆lu %s, ztrat铆te t铆m v拧echna jeho data"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "smazat"
+msgid "Internet connection configuration"
+msgstr "Konfigurace p艡ipojen铆 k internetu"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "P艡idat nov茅 pravidlo na konec"
+msgid "Scanning for TV channels"
+msgstr "Vyhled谩v谩m TV kan谩ly"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "p艡idat pravidlo"
+msgid "Kernel:"
+msgstr "J谩dro: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Posunout vybran茅 pravidlo o 煤rove艌 n铆啪e"
+msgid "/_About..."
+msgstr "/_O aplikaci..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "Dol暖"
+msgid "Bengali"
+msgstr "Beng谩lsk茅"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Posunout vybran茅 pravidlo o 煤rove艌 v媒拧e"
+msgid "Preference: "
+msgstr "Nastaven铆: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "Nahoru"
+msgid "Wizard..."
+msgstr "Pr暖vodce..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "vyberte soubor s opr谩vn臎n铆m pro zobrazen铆/煤pravy"
+msgid "Services: %d activated for %d registered"
+msgstr "Slu啪by: aktivov谩no %d z %d registrovan媒ch"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Aplikace DrakPerm se pou啪铆v谩 k zobrazen铆 soubor暖, kter茅 se pou啪铆vaj铆 k "
-"煤prav谩m opr谩vn臎n铆, vlastn铆k暖 a skupin aplikac铆 msec.\n"
-"M暖啪ete tak茅 vytv谩艡et sv谩 vlastn铆 pravidla, kter谩 p艡ep铆拧铆 pravidla v媒choz铆."
+msgid "Create a bootdisk"
+msgstr "Startovac铆 disketa"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "opr谩vn臎n铆"
+msgid "Solomon Islands"
+msgstr "Solomon Islands"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "skupina"
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "u啪ivatel"
+msgid "Workgroup"
+msgstr "Pracovn铆 skupina"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "cesta"
+msgid "Printer host name or IP"
+msgstr "N谩zev nebo IP adresa tisk谩rny"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Um铆st臎n铆 souboru auto_install.cfg"
+msgid "Host Path or Module"
+msgstr "Cesta na po膷铆ta膷i nebo modul"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Ur膷ete, kde je um铆st臎n soubor auto_install.cfg.\n"
-"\n"
-"Ponechte pr谩zdn茅, pokud nechcete pou啪铆t re啪im automatick茅 instalace.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "N谩zev fronty m暖啪e obsahovat pouze p铆smena, 膷铆slice a podtr啪铆tko"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Nebylo nalezen CD 膷i DVD obraz, pros铆m zkop铆rujte instala膷n铆 program a rpm "
-"soubory."
+msgid "Show current interface configuration"
+msgstr "Zobrazit aktu谩ln铆 nastaven铆 rozhran铆"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "Obraz nebyl nalezen"
+msgid "Development"
+msgstr "V媒voj"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "Adres谩艡 s obrazem instalace"
+msgid "Done"
+msgstr "Hotovo"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Ur膷ete, kde je um铆st臎n instala膷n铆 obraz.\n"
-"\n"
-"Pokud nem谩te ji啪 existuj铆c铆 adres谩艡, zkop铆rujte pros铆m obsah CD nebo DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "Webov媒 server"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Konec p谩sma adres DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tNezahrnout syst茅mov茅 soubory\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Po膷谩tek p谩sma adres DHCP"
+msgid "Chile"
+msgstr "Chile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"DHCP server dovoluje dal拧铆m po膷铆ta膷暖m spu拧t臎n铆 pomoc铆 PXE s vyu啪it铆m dan茅ho "
-"rozsahu adres.\n"
+"Inkoustov茅 tisk谩rny dod谩van茅 firmou Lexmark podporuj铆 pouze tisk na lok谩ln铆 "
+"tisk谩rn臎, tak啪e nelze tisknout p艡es vzd谩len媒 server. Pros铆m p艡ipojte "
+"tisk谩rnu na lok谩ln铆 port nebo ji nastavte na tom po膷铆ta膷i, ke kter茅mu bude "
+"p艡ipojena."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"S铆钮ov谩 adresa je %s a pou啪it谩 maska je %s\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Multifunk膷n铆 za艡铆zen铆 od HP bylo automaticky nastaveno pro mo啪nost "
+"skenov谩n铆. Nyn铆 lze skenovat z p艡铆kazov茅ho 艡谩dku p艡铆kazem \"scanimage"
+"\" (p艡铆kazem \"scanimage -d hp:%s\" zvol铆te po啪adovan媒 skener, pokud jich "
+"m谩te v铆ce) nebo z grafick茅ho prost艡ed铆 pomoc铆 \"xscanimage\" nebo \"xsane\". "
+"Pokud pou啪铆v谩te program GIMP, m暖啪ete tak茅 skenovat v媒b臎rem z nab铆dky \"Soubor"
+"\"/\"Z铆skat\". V铆ce informac铆 z铆sk谩te tak茅 p艡铆kazem \"man scanimage\" "
+"spu拧t臎n媒m na p艡铆kazov茅 艡谩dce.\n"
"\n"
+"Nepou啪铆vejte pro toto za艡铆zen铆 \"scannerdrake\"!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Rozhran铆 %s (na s铆ti %s)"
+msgid "(already added %s)"
+msgstr "(u啪 byl p艡id谩n %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Vyberte si pros铆m, kter媒 s铆钮ov媒 adapt茅r chcete pou啪铆t pro dhcp server."
+msgid ", using command %s"
+msgstr ", pou啪铆v谩 p艡铆kaz %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"V谩拧 po膷铆ta膷 bude nastaven jako instala膷n铆 PXE server se slu啪bou DHCP\n"
-"a TFTP serveru.\n"
-"Tato vlastnost umo啪艌uje instalovat dal拧铆 po膷铆ta膷e na lok谩ln铆 s铆ti pomoc铆\n"
-"po膷铆ta膷e.\n"
-"\n"
-"P艡ed pokra膷ov谩n铆m se ujist臎te, 啪e jste nastavili va拧i s铆钮 a p艡ipojen铆 k "
-"Internetu pomoc铆 aplikace drakconnect.\n"
-"\n"
-"Pozn.: Pro nastaven铆 lok谩ln铆 s铆t臎 (LAN) pot艡ebujete vyhrazen媒 s铆钮ov媒 adapt茅r."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt a Shift sou膷asn臎"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Nastaven铆 pro instalaci serveru"
+msgid "Flags"
+msgstr "P艡铆znaky"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Nastaven铆 PXE serveru"
+msgid "Add/Del Users"
+msgstr "P艡idat/Odebrat u啪ivatele"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "膶ekejte pros铆m, nastavuji volby zabezpe膷en铆..."
+msgid "Host/network IP address missing."
+msgstr "Chyb铆 IP adresa po膷铆ta膷e/s铆t臎."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "膶ekejte pros铆m, nastavuji 煤rove艌 zabezpe膷en铆..."
+msgid "weekly"
+msgstr "ka啪d媒 t媒den"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Pravideln茅 kontroly"
+msgid "Settings"
+msgstr "Nastaven铆"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Syst茅mov茅 volby"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Zadan谩 IP adresa pro po膷铆ta膷 nebo s铆钮 nen铆 spr谩vn谩.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Volby s铆t臎"
+msgid "Here is the full list of available countries"
+msgstr "Zde je kompletn铆 seznam dostupn媒ch zem铆"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternativn铆 testovac铆 str谩nka (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Nastaven铆m n谩sleduj铆c铆ch voleb lze upravit zabezpe膷en铆 va拧eho\n"
-"syst茅mu. Pokud pot艡ebujete poradit, prohl茅dn臎te si tipy s n谩pov臎dou.\n"
+"Pokud m谩te v拧echna CD vypsan谩 n铆啪e, klepn臎te na Ok.\n"
+"Pokud nem谩te 啪谩dn茅 z nich, klepn臎te na Zru拧it.\n"
+"Pokud V谩m chyb铆 pouze n臎kter茅 z nich, odzna膷te je, a zvolte Ok."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Spr谩vce bezpe膷nosti:"
+msgid "Wait please"
+msgstr "膶ekejte pros铆m"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Bezpe膷nostn铆 varov谩n铆:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "脷rove艌 zabezpe膷en铆:"
+msgid "Backup user files"
+msgstr "Z谩lohovat u啪ivatelsk茅 soubory"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(v媒choz铆 hodnota: %s)"
+msgid "New"
+msgstr "Nov媒"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standardn铆: B臎啪n茅 zabezpe膷en铆 doporu膷en茅 pro po膷铆ta膷, kter媒 bude p艡ipojen k "
-"s铆ti\n"
-" Internet jako klient.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Vysok谩: Jsou ji啪 zavedena n臎kter谩 omezen铆 a ka啪dou noc je spu拧t臎no "
-"n臎kolik automatick媒ch kontrol.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Vy拧拧铆: 脷rove艌 zabezpe膷en铆 je nyn铆 dostate膷n臎 vysok谩, aby bylo mo啪n茅 "
-"pou啪铆t\n"
-" syst茅m jako server, kter媒 p艡ij铆m谩 po啪adavky od mnoha klient暖. "
-"Pokud je v谩拧\n"
-"\t po膷铆ta膷 p艡ipojen k Internetu jen jako klient, m臎li byste zvolit "
-"ni啪拧铆 煤rove艌.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoidn铆: Podobn谩 p艡edchoz铆 煤rovni, ale syst茅m je zcela uzav艡en a 煤rove艌 "
-"zabezpe膷en铆\n"
-" je na sv茅m maximu.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Spr谩vce bezpe膷nosti:\n"
-" Pokud je zapnuta volba 'Bezpe膷nostn铆 varov谩n铆', budou "
-"bezpe膷nostn铆 varov谩n铆 zas铆l谩na tomuto u啪ivateli (u啪ivatelsk茅 jm茅no nebo\n"
-"\t email)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"N谩sleduj铆c铆 rozhodnut铆 je jedn铆m z t臎ch, kter茅 ovliv艌uj铆 celkovou "
+"bezpe膷nost\n"
+"syst茅mu GNU/Linux, tj. volba hesla pro u啪ivatele \"Root\". Root je spr谩vcem\n"
+"syst茅mu, je odpov臎dn媒 za prov谩d臎n铆 aktualizac铆, p艡id谩v谩n铆 u啪ivatel暖 a tak茅\n"
+"za celkov茅 nastaven铆 syst茅mu. Zkr谩cen臎: \"root\" m暖啪e 煤pln臎 v拧echno!\n"
+"To je tak茅 d暖vodem, pro膷 se heslo vol铆 takov茅, aby se nedalo lehce uhodnout\n"
+"a instala膷n铆 program DrakX zkontroluje, zda nen铆 p艡铆li拧 jednoduch茅. Jak "
+"vid铆te,\n"
+"je mo啪n茅 heslo nezadat, ale toto velmi d暖razn臎 nedoporu膷ujeme, a to z "
+"jednoho\n"
+"d暖vodu. Nemyslete si, 啪e pokud spust铆te syst茅m GNU/Linux, 啪e je v拧e bezpe膷n茅 "
+"a 啪e se nem暖啪e nic st谩t.. Vzhledem k tomu, 啪e na u啪ivatele \"root\" se "
+"nevztahuj铆\n"
+"b臎啪n谩 omezen铆, m暖啪e nen谩vratn臎 po拧kodit cel媒 syst茅m, smazat data z jin媒ch\n"
+"odd铆l暖 na disku a opera膷n铆ch syst茅m暖, vymazat pot艡ebn茅 soubory nebo cel茅\n"
+"odd铆ly, atd. Proto je d暖le啪it茅, aby nebylo jednoduch茅 se t铆mto u啪ivatelem "
+"st谩t.\n"
"\n"
+"Zvolen茅 heslo by se m臎lo skl谩dat ze znak暖 a 膷铆slic a m臎lo by b媒t dlouh茅\n"
+"minim谩ln臎 8 znak暖. Tak茅 nen铆 dobr茅 si ho kamkoliv poznamen谩vat - po\n"
+"nalezen铆 va拧铆 pozn谩mky m暖啪e b媒t velmi jednoduch茅 se do va拧eho syst茅mu\n"
+"dostat.\n"
"\n"
+"Nevolte v拧ak heslo p艡铆li拧 dlouh茅 nebo komplikovan茅, bude nutn茅 si jej bez\n"
+"v臎t拧铆ch pot铆啪铆 zapamatovat.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"P艡i zad谩v谩n铆 nebude heslo na obrazovce zobrazeno. Proto se heslo zad谩v谩\n"
+"dvakr谩t pro ov臎艡en铆, zda nedo拧lo k p艡eklepu p艡i prvn铆m pokusu. Tak je mo啪n茅\n"
+"heslo opravit a zadat dvakr谩t stejn茅. Pokud se v谩m p艡esto poda艡铆 zadat "
+"stejn媒\n"
+"p艡eklep dvakr谩t, budete muset toto heslo s p艡eklepem pou啪铆t p艡i prvn铆m\n"
+"p艡ihl谩拧en铆.\n"
"\n"
+"Jestli啪e chcete pou啪铆t ov臎艡ovac铆 server, klepn臎te na tla膷铆tko \"Roz拧铆艡en茅"
+"\".\n"
"\n"
+"Pokud se ve va拧铆 s铆ti pou啪铆v谩 pro ov臎艡ov谩n铆 u啪ivatel暖 protokol LDAP, NIS,\n"
+"nebo ov臎艡ovac铆 dom茅na Windows PDC, vyberte odpov铆daj铆c铆 protokol. Pokud\n"
+"o tom nic nev铆te, zeptejte se spr谩vce va拧铆 s铆t臎.\n"
"\n"
-"Pozn: Pokud m谩te PnP zvukovou kartu na ISA, pou啪ijte program sndconfig. "
-"Spust铆te ho p艡铆kazem \"sndconfig\" v konzoli."
+"Pokud nen铆 po膷铆ta膷 p艡ipojen do 啪谩dn茅 spravovan茅 s铆t臎 a v臎艡铆te v拧em, kte艡铆 "
+"maj铆\n"
+"p艡铆stup k po膷铆ta膷i, m暖啪ete vybrat volbu \"Bez hesla\".mo啪nost \"Lok谩ln铆 "
+"soubory\"."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"V po膷铆ta膷i nebyla nalezena 啪谩dn谩 zvukov谩 karta karta. Zkontrolujte pros铆m,"
-"zda podporovan谩 karta je spr谩vn臎 zapojena.\n"
-"\n"
-"\n"
-"Datab谩zi hardware lze nal茅zt na:\n"
-"\n"
+"Nyn铆 si vyberte 煤rove艌 zabezpe膷en铆 va拧eho po膷铆ta膷e Je z艡ejm茅, 啪e 膷铆m v铆ce\n"
+"je po膷铆ta膷 vyu啪铆v谩n a 膷铆m cenn臎j拧铆 data obsahuje, t铆m je pot艡eba zvolit "
+"vy拧拧铆\n"
+"煤rove艌. Na druhou stranu, vy拧拧铆 煤rove艌 znesnad艌uje n臎kter茅 obvykl茅 postupy.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Pokud nev铆te co vybrat, ponechte v媒choz铆 nastaven铆."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Nebyla nalezena 啪谩dn谩 zvukov谩 karta!"
+msgid "Load from floppy"
+msgstr "Nahr谩t z diskety"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "N谩hled t茅matu Bootsplash %s (%s)"
+msgid "The following printer was auto-detected. "
+msgstr "Byla automaticky detekov谩na n谩sleduj铆c铆 tisk谩rna. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Generuji n谩hled ..."
+msgid "Boot Floppy"
+msgstr "Spou拧t臎c铆 disketa"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Nejprve mus铆te vybrat soubor s obrazem!"
+msgid "Norwegian"
+msgstr "Norsk茅"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "V媒b臎r barvy pro li拧tu s pr暖b臎hem"
+msgid "Searching for new scanners ..."
+msgstr "Vyhled谩v谩m nov茅 skenery ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Toto t茅ma nem谩 je拧t臎 啪谩dn媒 bootsplash v %s !"
+msgid "Apache World Wide Web Server"
+msgstr "Server pro World Wide Web Apache"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Model cpu (generovan茅 膷铆slo pro submodel)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "ukl谩d谩m Bootsplash t茅ma..."
+msgid "select path to restore (instead of /)"
+msgstr "vyberte cestu pro obnoven铆 (m铆sto /)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "choose image file"
-msgstr "vyberte soubor s obrazem"
+msgid "Configure bootsplash picture"
+msgstr "Nastavit obr谩zek pro bootsplash"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image"
-msgstr "vyberte obraz"
+msgid "China"
+msgstr "膶铆na"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Nastavit obr谩zek pro bootsplash"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Zkontrolujte to, 啪e v拧echny tisk谩rny jsou p艡ipojeny a zapnuty).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Nevypisov谩n铆 hl谩拧ek j谩dra nastavit jako v媒choz铆"
+msgid "Georgia"
+msgstr "Georgie"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Zobrazit logo na konzoli"
+msgid "Reading data of installed printers..."
+msgstr "Na膷铆t谩m data z instalovan媒ch tisk谩ren..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose color"
-msgstr "v媒b臎r barvy"
+msgid " Erase Now "
+msgstr " Vymazat nyn铆 "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Save theme"
-msgstr "ulo啪it t茅ma"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preview"
-msgstr "n谩hled"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Vlo啪te naform谩tovanou disketu do %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "barva li拧ty s pr暖b臎hem"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "ano znamen谩, 啪e procesor m谩 aritmetick媒 koprocesor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "v媒拧ka li拧ty s pr暖b臎hem"
+msgid "Please Wait... Applying the configuration"
+msgstr "膶ekejte pros铆m... Aktivuji konfiguraci"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "拧铆艡ka li拧ty s pr暖b臎hem"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"um铆st臎n铆 y sou艡adnice pro\n"
-"lev媒 horn铆 roh li拧ty s pr暖b臎hem"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"um铆st臎n铆 x sou艡adnice pro\n"
-"lev媒 horn铆 roh li拧ty s pr暖b臎hem"
+msgid "SCSI controllers"
+msgstr "SCSI kontrol茅r"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text box height"
-msgstr "v媒拧ka textov茅ho boxu"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " na serveru LPD \"%s\", tisk谩rna \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "text width"
-msgstr "拧铆艡ka textu"
+msgid "Choosing a display manager"
+msgstr "V媒b臎r spr谩vce oken"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hodnota pro y sou艡adnici\n"
-"pro textov媒 box v po膷tu znak暖"
+msgid "Zeroconf Host name"
+msgstr "N谩zev po膷铆ta膷e pro Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hodnota pro x sou艡adnici\n"
-"pro textov媒 box v po膷tu znak暖"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresa mus铆 b媒t ve form谩tu 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Browse"
-msgstr "Proch谩zet"
+msgid "Ecuador"
+msgstr "Ekv谩dor"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Theme name"
-msgstr "N谩zev t茅matu"
+msgid "Add an item"
+msgstr "P艡idat polo啪ku"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "kone膷n茅 rozli拧en铆"
+msgid "The printers on this machine are available to other computers"
+msgstr "Tisk谩rny na tomto po膷铆ta膷i jsou p艡铆stupn茅 jin媒m vzd谩len媒m po膷铆ta膷暖m"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "first step creation"
-msgstr "prvn铆 krok p艡i vytv谩艡en铆"
+msgid "I can't find needed image file `%s'."
+msgstr "Nemohu naj铆t pot艡ebn媒 soubor '%s ' s obrazem."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-"pro spr谩vnou funkci je po啪adov谩n bal铆膷ek ImageMagick.\n"
-"Bal铆膷ek nainstalujete tla膷铆tkem \"OK\", nebo skon膷ete tla膷铆tkem \"Zru拧it\"."
+"Nebyla nalezena zvukov谩 karta. Zkuste spustit po instalaci \"harddrake\"."
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"V po膷铆ta膷i nebyla nalezena 啪谩dn谩 TV karta. Zkontrolujte pros铆m, zda "
-"podporovan谩 karta je spr谩vn臎 zapojena.\n"
-"\n"
-"\n"
-"Datab谩zi hardware lze nal茅zt na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Zad谩n 拧patn媒 port: %s.\n"
+"Spr谩vn媒 form谩t je \"port/tcp\" nebo \"port/udp\", \n"
+"kde 膷铆slo portu je mezi 1 a 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Nebyla nalezena TV karta!"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nyn铆 m暖啪ete spustit aplikaci XawTV (pod X Windows!)\n"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "P艡eji hezk媒 den!"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome a Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "Aplikace XawTV nen铆 nainstalovan谩!"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Nelze se p艡ihl谩sit pod u啪ivatelsk媒m jm茅nem %s (chybn茅 heslo?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Nastala chyba p艡i zkoum谩n铆 TV kan谩l暖"
+msgid "Azerbaidjani (latin)"
+msgstr "脕zerb谩jd啪谩nsk茅 (latinka)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Vyhled谩v谩m TV kan谩ly"
+msgid "Package not installed"
+msgstr "Bal铆膷ek nen铆 nainstalov谩n"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Prob铆h谩 vyhled谩v谩n铆 TV kan谩l暖 ..."
+msgid "Become a MandrakeExpert"
+msgstr "Sta艌te se Mandrake Expertem"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Area:"
-msgstr "Oblast :"
+msgid "American Samoa"
+msgstr "Americk谩 Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "TV norm:"
-msgstr "Norma TV:"
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Kop铆rovat fonty do syst茅mu"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "N谩pov臎da pro HardDrake"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "BogoMIPS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Nastaven铆 Mandrake Terminal Server"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-"Zadejte pros铆m\n"
-"typ TV normy a zemi"
+"\n"
+" Detaily o reportu pro DrackBackup\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australsk谩 kabelov谩 televize Optus"
+msgid "Restore all backups"
+msgstr "Obnovit v拧echny z谩lohy"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Nov媒 Z茅land"
+msgid "if set to yes, check open ports."
+msgstr "pokud je nastaveno, prov谩d铆 se kontrola na otev艡en茅 porty."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Francie [SECAM]"
+msgid "This may take a moment to erase the media."
+msgstr "Vymaz谩n铆 m茅dia m暖啪e chv铆li trvat."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "East Europe"
-msgstr "V媒chodn铆 Evropa"
+msgid "You can't select/unselect this package"
+msgstr "Nem暖啪ete vybrat/nevybrat tento bal铆膷ek"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "West Europe"
-msgstr "Z谩padn铆 Evropa"
+msgid "Warning"
+msgstr "Varov谩n铆"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "China (broadcast)"
-msgstr "膶铆na (broadcast)"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Dal拧铆 soubory:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japonsko (kabel)"
+msgid "Remote host name"
+msgstr "N谩zev vzd谩len茅ho po膷铆ta膷e"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japonsko (broadcast)"
+msgid "deactivate now"
+msgstr "deaktivovat nyn铆"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
+msgid "access to X programs"
+msgstr "p艡铆stup k program暖m v X prost艡ed铆"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
+msgid "Computing the size of the Windows partition"
+msgstr "Po膷铆t谩m voln茅 m铆sto na Windows odd铆lu"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kabel)"
+msgid "Italy"
+msgstr "It谩lie"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Name of printer"
+msgstr "N谩zev tisk谩rny"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-"Aplikace XawTV nen铆 nainstalovan谩!\n"
-"\n"
-"\n"
-"M谩te-li TV kartu a n谩stroj DrakX ji ani nerozpoznal (nen铆 p艡铆tomen\n"
-"modul bttv nebo saa7314 v \"/etc/modules\"), ani nenainstaloval\n"
-"aplikaci XawTV, po拧lete pros铆m v媒sledek p艡铆kazu\n"
-"\"lspcidrake -v -f\" na adresu \"install\\@mandrakesoft.com\"\n"
-"s p艡edm臎tem zpr谩vy \"undetected TV card\".\n"
-"\n"
-"Tuto aplikaci m暖啪ete doinstalovat p艡铆kazem \"urpmi xawtv\" spu拧t臎n媒m \n"
-"v konzoli pod u啪ivatelem root."
+msgid "disable"
+msgstr "vypnout"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "primary"
-msgstr "prim谩rn铆"
+msgid "error unmounting %s: %s"
+msgstr "chyba odpojov谩n铆 %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "secondary"
-msgstr "sekund谩rn铆"
+msgid "Do it!"
+msgstr "Prov茅st!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "Kajmansk茅 ostrovy"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
+msgstr "%s neodpov铆d谩"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Select model manually"
+msgstr "Vybrat model ru膷n臎"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Format"
+msgstr "Form谩tovat"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Klepn臎te na za艡铆zen铆 v lev茅 膷谩sti stromu a zobraz铆te zde o n臎m informace."
+"Nejb臎啪n臎ji se pro p艡ipojen铆 pomoc铆 ADSL pou啪铆v谩 pppoe.\n"
+"N臎kter谩 p艡ipojen铆 pou啪铆vaj铆 pptp, n臎kter谩 pouze dhcp. Jestli si nejste "
+"jist铆, zvolte 'pou啪铆t pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Nezn谩m媒"
+msgid "Various"
+msgstr "Dal拧铆"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "nezn谩m媒"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Spou拧t铆m \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"PrinterDrake nemohl zjistit, jak媒 model je va拧e tisk谩rna %s. Pros铆m vyberte "
+"si odpov铆daj铆c铆 model ze seznamu."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Spustit n谩stroj pro nastaven铆"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Ozna膷te tisk谩rnu, kterou chcete p艡en茅st a stiskn臎te \"P艡en茅st\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Nastavit modul"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informace"
+msgid "Albanian"
+msgstr "Alb谩nsk茅"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Nalezen媒 hardware"
+msgid "Lithuania"
+msgstr "Litva"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Verze Harddrake2 "
+msgid "Compact"
+msgstr "Kompaktn铆"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Prob铆h谩 detekce"
+msgid "Detected model: %s %s"
+msgstr "Nalezen model: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft pro v谩s vybral ten nejlep拧铆 software"
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Toto je HardDrake, n谩stroj spole膷nosti Mandrake pro nastaven铆 hardware.\n"
"Verze:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "O aplikaci HardDrake"
+msgid "Local files"
+msgstr "Lok谩ln铆 soubory"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_O aplikaci..."
+msgid "maybe"
+msgstr "m暖啪e se hodit"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/Nah_l谩sit chybu"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Pokud vyberete n臎jak茅 za艡铆zen铆, uvid铆te o n臎m informace v prav茅m r谩mci "
-"(\"Informace\")"
+"Va拧e grafick谩 karta z艡ejm臎 disponuje konektorem pro TV-OUT.\n"
+"Tento konektor m暖啪e b媒t zprovozn臎n pou啪it铆m tzv. frame bufferu.\n"
+"\n"
+"Aby to bylo mo啪n茅, budete muset napojit svou grafickou kartu na televizn铆 "
+"p艡ij铆ma膷, a to je拧t臎 ne啪 zapnete v谩拧 po膷铆ta膷.\n"
+"Pot茅 vyberte ve va拧em zavad臎膷i polo啪ku \"TV out\".\n"
+"\n"
+"M谩 va拧e karta tuto vlastnost?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Zvolte za艡铆zen铆 !"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Popis pol铆:\n"
+"Prov谩d铆te nastaven铆 tisku s 煤膷tem na syst茅mu Windows. D铆ky chyb臎 v klientu "
+"protokolu Samba je heslo p艡i tisku posl谩no jako 膷ist媒 text z p艡铆kazov茅 "
+"艡谩dky. Je tud铆啪 mo啪n茅, aby kdokoliv vid臎l toto heslo na obrazovce kdy啪 si "
+"zad谩 p艡铆kaz nap艡. \"ps auxwww\".\n"
+"\n"
+"Doporu膷ujeme pou啪铆vat jednu z n谩sleduj铆c铆ch alternativ (ve v拧ech p艡铆padech "
+"je dobr茅 m铆t nastaven p艡铆stup pouze z po膷铆ta膷暖 z lok谩ln铆 s铆t臎, respektive za "
+"firewallem):\n"
+"\n"
+"Pou啪铆t 煤膷et, kter媒 nem谩 nastaven 啪谩dn茅 heslo, jako je \"GUEST\" nebo "
+"speci谩ln铆 煤膷et pouze pro 煤膷ely tisku. Neodstra艌ujte ochranu heslem z b臎啪n茅ho "
+"煤膷tu nebo dokonce z administr谩torsk茅ho 煤膷tu.\n"
+"\n"
+"Nastavte tisk谩rnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
+"Potom nastavte tisk na t茅to tisk谩rn臎 pomoc铆 typy spojen铆 \"%s\" v aplikaci "
+"PrinterDrake.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "N谩pov臎da pro HardDrake"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Popis polo啪ek"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/_N谩pov臎da"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Quit"
-msgstr "/_Konec"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Automaticky detekovat _jazz disky"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tis铆c barev (16 bit暖)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Automaticky detekovat _modemy"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Ulo啪it na pevn媒 disk do adres谩艡e: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Automaticky detekovat _tisk谩rny"
+msgid "Size: %d KB\n"
+msgstr "Velikost: %d kB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Volby"
+msgid "Remove fonts on your system"
+msgstr "Odebrat fonty ze syst茅mu"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "jm茅no dodavatele procesoru"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Varov谩n铆, s铆钮ov媒 adapt茅r (%s) je ji啪 nastaven.\n"
+"\n"
+"Chcete ho automaticky p艡enastavit?\n"
+"\n"
+"Lze to tak茅 prov茅st ru膷n臎, ale mus铆te v臎d臎t, co d臎l谩te."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "jm茅no dodavatele za艡铆zen铆"
+msgid "Graphical interface at startup"
+msgstr "Spou拧t铆 se X"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Typ sb臎rnice, ke kter茅 je p艡ipojena my拧"
+msgid "Please enter the directory to save:"
+msgstr "Zadejte adres谩艡, kam bude um铆st臎na z谩loha:"
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Model cpu (generovan茅 膷铆slo pro submodel)"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Druhy form谩tu disket podporovan茅 mechanikou"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "膶铆slov谩n铆 modelu"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nen铆 dostatek odd铆l暖 pro RAID 煤rovn臎 %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "膷铆slo procesoru"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Jsou nastaveny n谩sleduj铆c铆 tisk谩rny. Dvojit媒m klepnut铆m na ka啪dou z nich je "
+"mo啪n茅 je modifikovat, nastavit jako v媒choz铆 nebo o nich z铆skat informace."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processor ID"
-msgstr "ID procesoru"
+msgid "Connected"
+msgstr "P艡ipojen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "network printer port"
-msgstr "port s铆钮ov茅 tisk谩rny"
+msgid "USB printer \\#%s"
+msgstr "USB tisk谩rna \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "n谩zev CPU"
+msgid "Macedonian"
+msgstr "Makedonsk茅"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "N谩zev"
+msgid "Bridges and system controllers"
+msgstr "Syst茅mov茅 kontrol茅ry"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "po膷et tla膷铆tek na my拧i"
+msgid "/File/_Save"
+msgstr "/Soubor/_Ulo啪it"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Po膷et tla膷铆tek"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Ofici谩ln铆 jm茅no dodavatele procesoru"
+msgid "No details"
+msgstr "Bez detail暖"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Model name"
-msgstr "N谩zev modelu"
+msgid "very nice"
+msgstr "nejm茅n臎 d暖le啪it茅"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Generace cpu (nap艡. 8 pro Pentium III, ...)"
+msgid "Preview"
+msgstr "n谩hled"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Remote Control"
+msgstr "Vzd谩len茅 ovl谩d谩n铆"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "hard disk model"
-msgstr "model pevn茅ho disku"
+msgid "Please select media for backup..."
+msgstr "Pros铆m zvolte si m茅dium pro z谩lohy..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "t艡铆da hardwarov茅ho za艡铆zen铆"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
-msgstr "T艡铆da m茅di铆"
+msgid "Allow Thin Clients"
+msgstr "Povolit tenk茅 klienty"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Specifick谩 t艡铆da cpu"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gruz铆nsk茅 (\"Rusk茅\" rozlo啪en铆)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Level"
-msgstr "脷rove艌"
+msgid "/_Options"
+msgstr "/_Volby"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Druhy form谩tu disket podporovan茅 mechanikou"
+msgid "Your printer model"
+msgstr "Model tisk谩rny"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Form谩ty pro diskety"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(VAROV脕N脥! Pro ko艡enov媒 odd铆l pou啪铆v谩te XFS, vytvo艡en铆 \n"
+"spou拧t臎c铆 diskety bude z艡ejm臎 ne煤sp臎拧n茅, proto啪e XFS\n"
+"pot艡ebuje velmi velk媒 ovlada膷)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-"N臎kter茅 prvn铆 modely 膷ipset暖 i486DX100 neprov谩d臎ly spr谩vn臎 po instrukci "
-"\"halt\" n谩vrat do opera膷n铆ho re啪imu"
+"\n"
+"- Smazat pomocn茅 tar soubory po proveden铆 z谩lohy.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt chyba"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+"Nebylo nalezen CD 膷i DVD obraz, pros铆m zkop铆rujte instala膷n铆 program a rpm "
+"soubory."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Prvn铆 verze procesor暖 Pentium byly chybov茅 a zp暖sobovaly zatuhnut铆 p艡i "
-"dek贸dov谩n铆 instrukce F00F"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "V铆ce煤膷elov媒 konfigura膷n铆 n谩stroj Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f chyba"
+msgid "Save"
+msgstr "Ulo啪it"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "ano znamen谩, 啪e aritmetick媒 koprocesor je vybaven vektorem v媒jimek"
+msgid "The %s is unsupported"
+msgstr "Skener %s nen铆 podporov谩n"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Zda m谩 FPU irq vektor"
+msgid "Load the drivers for your usb devices."
+msgstr "Nahr谩t ovlada膷e pro usb za艡铆zen铆."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ano znamen谩, 啪e procesor m谩 aritmetick媒 koprocesor"
+msgid "Disk"
+msgstr "Disk"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "P艡铆tomnost FPU"
+msgid "Enter a printer device URI"
+msgstr "Zadejte URI tiskov茅ho za艡铆zen铆"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Prvn铆 verze procesor暖 Pentium m臎ly z v媒roby chybu v jednotce pro plovouc铆 "
-"艡谩dovou 膷谩rku, kter谩 nedosahovala po啪adovan茅 p艡esnosti p艡i operaci FDIV"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv chyba"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "P艡铆znaky CPU nalezen茅 j谩drem"
+"脷sp臎ch spole膷nosti MandrakeSoft je zalo啪en na principech Svobodn茅ho "
+"Software. Tento opera膷n铆 syst茅m je v媒sledkem spolupr谩ce 膷谩sti celosv臎tov茅 "
+"Linuxov茅 komunity"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "P艡铆znaky"
+msgid "Israel"
+msgstr "Izrael"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modul j谩dra syst茅mu GNU/Linux, kter媒 ovl谩d谩 toto za艡铆zen铆"
+msgid "French Guiana"
+msgstr "Francouzsk谩 Guinea"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-"nov媒, dynamick媒 n谩zev za艡铆zen铆, kter媒 generuje zabudovan媒 syst茅m j谩dra devfs"
+msgid "add a rule"
+msgstr "p艡idat pravidlo"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Nov茅 za艡铆zen铆 devfs"
+msgid "A command line must be entered!"
+msgstr "Mus铆 b媒t zad谩n n臎jak媒 p艡铆kaz!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "star媒, statick媒 n谩zev za艡铆zen铆, kter媒 se pou啪铆v谩 v bal铆膷ku dev"
+msgid "Select user manually"
+msgstr "Vybrat u啪ivatele manu谩ln臎"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Star媒 soubor se za艡铆zen铆m"
+msgid "Transfer printer configuration"
+msgstr "P艡en茅st konfiguraci tisk谩rny"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Toto pole popisuje za艡铆zen铆"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Chcete povolit tisk na tisk谩rn谩ch vypsan媒ch v媒拧e?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"Frekvence CPU v MHz (Megahertz je hodnota p艡ibli啪n臎 rovna vypo膷ten茅mu po膷tu "
-"instrukc铆, kter茅 je schopen procesor prov茅st za sekundu)"
+"Aby toto spr谩vn臎 pracovalo se serverem W2K PDC, bude muset spr谩vce serveru "
+"spustit: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
+"everyone / add a restartovat server.\n"
+"Budete tak茅 pot艡ebovat u啪ivatelsk茅 jm茅no a heslo Spr谩vce Dom茅ny, abyste "
+"mohli p艡ipojit po膷铆ta膷 do dom茅ny Windows(TM).\n"
+"Jestli啪e je拧t臎 nen铆 povolena s铆钮, aplikace DrakX se pokus铆 p艡ipojit k dom茅n臎 "
+"po f谩zi nastaven铆 s铆t臎.\n"
+"Pakli啪e toto nastaven铆 z jak茅hokoli d暖vodu sel啪e, a ov臎艡en铆 na PDC nebude "
+"pracovat spr谩vn臎, spus钮te po nab臎hnut铆 syst茅mu 'smbpasswd -j DOMAIN -U USER%%"
+"PASSWORD' (pou啪ijte svou dom茅nu Windows(TM) a u啪ivatelsk茅 jm茅no a heslo "
+"Spr谩vce dom茅ny).\n"
+"P艡铆kaz 'wbinfo -t' otestuje, zda-li va拧e tajn茅 informace pro ov臎艡en铆 jsou "
+"spr谩vn茅."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvence (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "脷rove艌, kterou lze z铆skat po proveden铆 instrukce cpuid"
+msgid "Use network connection to backup"
+msgstr "Pou啪铆t s铆钮ov茅 p艡ipojen铆 pro z谩lohov谩n铆"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid 煤rove艌"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Povol铆/Zak谩啪e sulogin(8) v jednou啪ivatelsk茅m re啪imu."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"V t茅to chv铆li je mo啪n茅 vybrat, kter茅 programy chcete nainstalovat na v谩拧 "
+"syst茅m.\n"
+"Mandrake Linux obsahuje tis铆ce bal铆膷k暖 s programy a pro snadn臎j拧铆 orientaci\n"
+"byly rozd臎leny do skupin, kter茅 sdru啪uj铆 podobn茅 aplikace.\n"
+"\n"
+"Bal铆膷ky jsou rozd臎leny do skupin, kter茅 odpov铆daj铆 tomu, jak je nej膷ast臎ji\n"
+"po膷铆ta膷 pou啪铆v谩n. Skupiny samotn茅 jsou um铆st臎ny do 膷ty艡 sekc铆. V媒b臎r "
+"aplikac铆\n"
+"z t臎chto sekc铆 lze r暖zn臎 kombinovat, tak啪e m暖啪ete m铆t celou instalov谩nu "
+"sekci\n"
+"\"Pracovn铆 stanice\" a k n铆 n臎jak茅 aplikace ze sekce \"V媒voj\".\n"
+"\n"
+" * \"Pracovn铆 stanice\": pokud pl谩nujete pou啪铆vat po膷铆ta膷 p艡ev谩啪n臎 na\n"
+"b臎啪nou pr谩ci, vyberte si z dal拧铆ch skupin odpov铆daj铆c铆 bal铆膷ky.\n"
+"\n"
+" * \"V媒voj\": pokud budete na po膷铆ta膷i programovat, m暖啪ete si z t茅to\n"
+"sekce vybrat dal拧铆 skupiny.\n"
+"\n"
+" * \"Server\": pokud bude po膷铆ta膷 provozov谩n jako server, m谩te mo啪nost\n"
+"vybrat si ty nejb臎啪n臎j拧铆 slu啪by, kter茅 chcete nainstalovat.\n"
+"\n"
+" * \"Grafick谩 prost艡ed铆\": pokud preferujete grafick茅 prost艡ed铆, zde je\n"
+"nab铆dka n臎kolika prost艡ed铆, ze kter茅 si mus铆te vybrat nejm茅n臎 jedno,\n"
+"aby bylo mo啪n茅 grafick茅 prost艡ed铆 nainstalovat.\n"
+"\n"
+"Pokud p艡ejedete my拧铆 nad skupinou, objev铆 se kr谩tk媒 text, kter媒 vysv臎tluje,\n"
+"co je obsahem dan茅 skupiny. Pokud nevyberete p艡i instalaci 啪谩dnou skupinu,\n"
+"zobraz铆 se ot谩zka na instalaci n臎kolika typ暖 minim谩ln铆 instalace:\n"
+"\n"
+" * \"Podpora X\" Provede instalaci minim谩ln铆 podpory pro prost艡ed铆 X-"
+"Window.\n"
+"\n"
+" * \"Se z谩kladn铆 dokumentac铆\" Nainstaluje syst茅m se z谩kladn铆mi programy a\n"
+"jejich dokumentac铆. Tento typ je vhodn媒 pro instalaci serveru.\n"
+"\n"
+" * \"Minim谩ln铆 instalace\" Nainstaluje se opravdu nezbytn茅 minimum, aby "
+"bylo\n"
+"mo啪n茅 provozovat Linux z p艡铆kazov茅 艡谩dky. Instalace zabere asi 65MB.\n"
+"\n"
+"Pokud zatrhnete volbu \"Vlastn铆 v媒b臎r bal铆膷k暖\", zobraz铆 se seznam v拧ech\n"
+"bal铆膷k暖, kter茅 je mo啪no nainstalovat. To je to u啪ite膷n茅 v p艡铆pad臎, 啪e "
+"chcete\n"
+"m铆t absolutn铆 kontrolu nad t铆m, co se bude instalovat.\n"
+"\n"
+"Pokud jste spustili instalaci v re啪imu \"Aktualizace\", m暖啪ete zru拧it v媒b臎r\n"
+"dan媒ch skupin, 膷铆m啪 zabr谩n铆te instalaci nov媒ch bal铆膷k暖. To je u啪ite膷n茅\n"
+"pro p艡铆pad opravy nebo aktualizace existuj铆c铆ho syst茅mu."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Rodina pro cpu (nap艡. 6 pro i686 t艡铆du)"
+msgid "Accept user"
+msgstr "Vytvo艡it u啪ivatele"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Rodina CPU"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Zda m谩 cpu chybu 膷谩rky Cyrix 6x86"
+msgid "Bad choice, try again\n"
+msgstr "艩patn谩 volba, zkuste to znovu\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Chyba 膷谩rky"
+msgid "Heard and McDonald Islands"
+msgstr "Heard a McDonaldovy ostrovy"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"speci谩ln铆 schopnosti za艡铆zen铆 (schopnost vypalov谩n铆 a/nebo podpora DVD)"
+msgid "No alternative driver"
+msgstr "Bez alternativn铆ho ovlada膷e"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Kapacita za艡铆zen铆"
+msgid "Toggle to expert mode"
+msgstr "P艡epnout se do m贸du 'expert'"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Velikost cache (druh谩 煤rove艌) na cpu"
+msgid "(on this machine)"
+msgstr "(na tomto po膷铆ta膷i)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Velikost vyrovn谩vac铆 pam臎ti"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Adresa br谩ny by m臎la b媒t ve tvaru 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- za艡铆zen铆 PCI: ud谩v谩 slot PCI, za艡铆zen铆 a funkci t茅to karty\n"
-"- za艡铆zen铆 EIDE: za艡铆zen铆 je bu膹 master nebo slave\n"
-"- za艡铆zen铆 SCSI: ud谩v谩 ID sb臎rnice a za艡铆zen铆 SCSI"
+"byl detekov谩n win modem zalo啪en媒 na \"%s\", chcete nainstalovat pot艡ebn媒 "
+"software ?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Um铆st臎n铆 na sb臎rnici"
+msgid "Looking at packages already installed..."
+msgstr "Prohled谩v谩m ji啪 instalovan茅 bal铆膷ky..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- za艡铆zen铆 PCI a USB: vypisuje se dodavatel, za艡铆zen铆, subdodavatel a "
-"podza艡铆zen铆 (ID PCI/USB)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Identifikace sb臎rnice"
+msgid "Driver"
+msgstr "Ovlada膷"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"GNU/Linux j谩dro pot艡ebuje spustit v媒po膷etn铆 smy膷ku p艡i spu拧t臎n铆 pro "
-"inicializaci 膷铆ta膷e hodin. V媒sledek je ulo啪en v prom臎nn茅 BogoMIPS jako "
-"takov媒 \"benchmark\" pro cpu."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "BogoMIPS"
+"LinuxConf prov谩d铆 r暖zn茅 煤koly p艡i spu拧t臎n铆 syst茅mu\n"
+"nutn茅 pro spr谩vu syst茅mov茅 konfigurace."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Kan谩l EIDE/SCSI"
+msgid "Printer on remote lpd server"
+msgstr "Tisk谩rna na vzd谩len媒 lpd serveru"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "Kan谩l"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"P艡ed instalac铆 font暖 se ujist臎te, 啪e m谩te pot艡ebn谩 pr谩va na instalac铆 a "
+"pou啪铆v谩n铆 na syst茅mu.\n"
+"\n"
+"- Fonty lze instalovat b臎啪n媒m zp暖sobem. Ve v媒jime膷n媒ch p艡铆padech m暖啪e 拧patn媒 "
+"font zp暖sobit zamrznut铆 X serveru."
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"toto je fyzick谩 sb臎rnice, na kterou je p艡ipojeno za艡铆zen铆 (nap艡. PCI, "
-"USB, ...)"
+"Yaboot je zavad臎膷 pro po膷铆ta膷e Macintosh. Umo啪艌uje spou拧t臎t jak GNU/Linux, "
+"MacOS tak i MacOSX, pokud jsou na po膷铆ta膷i nainstalov谩ny. Ve v臎t拧in臎\n"
+"p艡铆pad暖 jsou tyto opera膷n铆 syst茅my spr谩vn臎 detekov谩ny. Pokud nejsou, m暖啪ete\n"
+"zde na t茅to obrazovce p艡idat z谩znamy ru膷n臎. Dejte si ale pozor na spr谩vnou\n"
+"volbu parametr暖.\n"
+"\n"
+"Yaboot m谩 tyto hlavn铆 volby:\n"
+"\n"
+" * 脷vodn铆 hl谩拧ka: jednoduch谩 textov谩 zpr谩va, kter谩 je zobrazena p艡ed "
+"v媒zvou.\n"
+"\n"
+" * Spou拧t臎c铆 za艡铆zen铆: ud谩v谩 m铆sto, kde jsou informace pot艡ebn茅 pro "
+"spu拧t臎n铆\n"
+"GNU/Linuxu. Oby膷ejn臎 je to bootstrap odd铆l, kter媒 byl vytvo艡en ji啪 p艡edt铆m.\n"
+"\n"
+" * Prodleva pro Firmware: na rozd铆l od zavad臎膷e LILO jsou zde dv臎 prodlevy.\n"
+"Prvn铆 prodleva v sekund谩ch umo啪艌uje zvolit mezi spu拧t臎n铆m CD, OF boot,\n"
+"MacOS nebo Linuxu.\n"
+"\n"
+" * Prodleva pro j谩dro: tato prodleva je podobn谩 prodlev臎 pro LILO.\n"
+"Ud谩v谩 v n谩sobc铆ch 0,1 vte艡iny jak dlouho se 膷ek谩, ne啪 se zavede \n"
+"v媒choz铆 j谩dro.\n"
+"\n"
+" * Povolit spu拧t臎n铆 z CD?: tato volba dovoluje pou啪铆t \"C\" pro spu拧t臎n铆 "
+"CD.\n"
+"\n"
+" * Povolit OF Boot?: tato volba dovoluje pou啪铆t \"N\" pro spu拧t臎n铆 Open "
+"Firm.\n"
+"\n"
+" * V媒choz铆 OS: vyberte v媒choz铆 OS, kter媒 se spust铆 po uplynut铆 prodlevy."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Sb臎rnice"
+msgid "No mouse"
+msgstr "Bez my拧i"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "seznam alternativn铆ch ovlada膷暖 pro va拧i zvukovou kartu"
+msgid "Germany"
+msgstr "N臎mecko"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativn铆 ovlada膷e"
+msgid "Austria"
+msgstr "Rakousko"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se kl谩vesa Backspace chovala v konzoli jako Delete?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Pro nastaven铆 zvukov茅 karty spus钮te po instalaci \"sndconfig\"."
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Jak茅 je rozlo啪en铆 va拧铆 kl谩vesnice?"
+msgid "Collapse Tree"
+msgstr "Sbalit v臎tev"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nelze spustit aktualizaci na b臎啪铆c铆 syst茅m !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Nastaven铆 automatick茅 instalace"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
+msgid "Configure networking"
+msgstr "Nastaven铆 s铆t铆"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Kam chcete nainstalovat zav谩d臎c铆 program?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Vlo啪te pros铆m Instala膷n铆 CD-ROM do mechaniky a stiskn臎te Ok.\n"
-"Pokud CD nem谩te, stiskn臎te Zru拧it pro p艡eru拧en铆 aktualizace syst茅mu."
+"V媒b臎r preferovan茅ho jazyka ovliv艌uje dokumentaci, jazyk instala膷n铆ho "
+"programu\n"
+"a v拧ech program暖 obecn臎. V prvn铆m kroku si vyberete region kde 啪ijete\n"
+"a potom jazyk kter媒m mluv铆te.\n"
+"\n"
+"Tla膷铆tko \"Roz拧铆艡en茅\" umo啪艌uje zvolit dal拧铆 jazyky, kter茅 budou tak茅\n"
+"nainstalov谩ny a m暖啪ete je pou啪铆t v syst茅mu. V媒b臎rem dal拧铆ch jazyk暖 "
+"nainstalujete\n"
+"soubory s aplikacemi a dokumentac铆 specifick茅 pro tyto jazyky. Pokud "
+"nap艡铆klad\n"
+"na po膷铆ta膷i pracuj铆 ob膷as lid茅 ze 艩pan臎lska, vyberte angli膷tinu jako hlavn铆\n"
+"jazyka pod tla膷铆tkem roz拧铆艡en茅 zatrhn臎te volbu \"艩pan臎l拧tina|艩pan臎lsko\".\n"
+"\n"
+"P艡i v媒b臎ru jazyka nejste omezeni pouze na jedin媒 dal拧铆. M暖啪ete si jich "
+"vybrat\n"
+"v铆ce nebo dokonce nainstalovat v拧echny vybr谩n铆m volby \"V拧echny jazyky\".\n"
+"P艡铆davn谩 volba \"Pou啪铆t Unicode jako v媒choz铆\" nastavuje cel媒 syst茅m na\n"
+"pou啪铆v谩n铆 Unicode (UTF-8). Zat铆m je to ale experiment谩ln铆 volba. Pokud\n"
+"vyberete r暖zn茅 jazyky, kter茅 vy啪aduj铆 jin谩 k贸dov谩n铆, bude i p艡esto podpora\n"
+"pro Unicode nainstalov谩na.\n"
+"\n"
+"Zm臎nu r暖zn媒ch jazyk暖 instalovan媒ch v syst茅mu lze prov茅st pomoc铆 p艡铆kazu\n"
+"\"/usr/bin/localedrake\" spu拧t臎n茅ho jako u啪ivatel \"root\". Spu拧t臎n铆 pod\n"
+"b臎啪n媒m u啪ivatelem zp暖sob铆 zm臎nu nastaven铆 pouze pro dan茅ho u啪ivatele.Lze "
+"takto doinstalovat v铆ce jazyk暖. Pokud m谩te jazyky vybr谩ny, klikn臎te na \"OK"
+"\"\n"
+"a instalace bude pokra膷ovat dal拧铆m krokem."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Vym臎nit CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Tato verze Mandrake Linux %s nepodporuje."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Zm臎ny jsou provedeny, ale pro aktivaci je nutn茅 prov茅st odhl谩拧en铆"
+msgid "DHCP client"
+msgstr "DHCP klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Ulo啪it jako..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Obnova ze souboru %s neusp臎la: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Zadejte pros铆m n铆啪e svou po拧tovn铆 adresu "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (s茅riov谩, star媒 C7 typ)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "nastaven铆 varov谩n铆"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Opravdu chcete nastavit tisk na tomto po膷铆ta膷i?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Pokud bude hodnota vet拧铆 ne啪 zadan茅 膷铆slo, obdr啪铆te varovnou zpr谩vu"
+msgid "New devfs device"
+msgstr "Nov茅 za艡铆zen铆 devfs"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "nahr谩t volby"
+msgid "ERROR: Cannot spawn %s."
+msgstr "CHYBA: Nelze spustit p艡铆kaz %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Pokud jedna z vybran媒ch slu啪eb nepob臎啪铆, obdr啪铆te varovnou zpr谩vu"
+msgid "Boot Style Configuration"
+msgstr "Nastaven铆 stylu zav谩d臎n铆"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automatick谩 synchronizace 膷asu (pomoc铆 NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "nastaven铆 slu啪eb"
+msgid "Backup files not found at %s."
+msgstr "Souboru pro z谩lohu z %s nenalezeny."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Slu啪ba Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "D臎kujeme v谩m, 啪e jste si vybrali Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Slu啪ba Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Arm茅nsk茅 (foneticky)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Server SSH"
+msgid "Card model:"
+msgstr "Model karty :"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Server Samba"
+msgid "Thin Client"
+msgstr "Tenk媒 klient"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Po拧tovn铆 server Postfix"
+msgid "Start Server"
+msgstr "Spustit server"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Server FTP"
+msgid "Turkmenistan"
+msgstr "Turkmenist谩n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Dekod茅r n谩zvu dom茅ny"
+msgid "All remote machines"
+msgstr "V拧echny vzd谩len茅 po膷铆ta膷e"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Server pro World Wide Web Apache"
+msgid "Install themes"
+msgstr "Instalovat t茅mata"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"V铆tejte v nastaven铆 elektronick茅 po拧ty.\n"
-"\n"
-"Zde lze nastavit syst茅m pos铆l谩n铆 varovn媒ch zpr谩v.\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Nastaven铆 varovn媒ch zpr谩v e-mailem"
+" aktualizace 2002 MandrakeSoft od Stewa Benedicta <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Varovn茅 zpr谩vy e-mailem"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "膷ekejte pros铆m, zpracov谩v谩m soubor: %s"
+msgid "Preparing installation"
+msgstr "P艡ipravuji instalaci"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Obsah souboru"
+msgid "Edit selected host/network"
+msgstr "Upravit vybran媒 po膷铆ta膷/s铆钮"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Kalend谩艡"
+msgid "Add User -->"
+msgstr "P艡idat u啪ivatele -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Vyberte soubor"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "neshodn媒ch"
+msgid "True Type fonts installation"
+msgstr "Instalace p铆sem True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "shodn媒ch"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Automaticky nal茅zt tisk谩rny p艡ipojen茅 p艡铆mo k lok谩ln铆 s铆ti"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "Nastaven铆"
+msgid "LAN configuration"
+msgstr "Nastaven铆 LAN"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "N谩stroj na sledov谩n铆 log暖"
+msgid "hard disk model"
+msgstr "model pevn茅ho disku"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "vyhledat"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Nelze pou啪铆t LVM Logick茅ho disku na p艡ipojen媒 bod %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Vysv臎tlivky n谩stroj暖 Mandrake Linuxu"
+msgid "Get Windows Fonts"
+msgstr "Na膷铆st fonty z Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "Zpr谩vy"
+msgid "Iranian"
+msgstr "脥r谩nsk茅"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "U啪ivatel"
+msgid "Croatia"
+msgstr "Chorvatsko"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/N谩pov臎da/_O aplikaci..."
+msgid "Gateway:"
+msgstr "Br谩na(gateway):"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Volby/Test"
+msgid "Add server"
+msgstr "P艡idat server"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Soubor/-"
+msgid "Remote printer name"
+msgstr "N谩zev vzd谩len茅 tisk谩rny"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Soubor/Ulo啪it _jako"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft navrhl exkluzivn铆 n谩stroje pro tvorbu dosud nejbezpe膷n臎j拧铆 "
+"verze Linuxu: DrakSec, n谩stroj pro spr谩vu bezpe膷nosti syst茅mu, a siln媒 "
+"firewall, kter茅 spolu spolupracuj铆 a do zna膷n茅 m铆ry omezuj铆 riziko "
+"nep艡谩telsk茅ho pr暖niku."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>U"
+msgid "Device: "
+msgstr "Za艡铆zen铆: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Soubor/_Ulo啪it"
+msgid "Printerdrake"
+msgstr "PrinterDrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Souhlas s licenc铆"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Soubor/_Otev艡铆t"
+msgid "System Options"
+msgstr "Syst茅mov茅 volby"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "Zadejte adres谩艡, kde jsou um铆st臎ny z谩lohy"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Soubor/_Nov媒"
+msgid "Please choose the desired security level"
+msgstr "Vyberte pros铆m po啪adovanou 煤rove艌 zabezpe膷en铆"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Zobrazit pouze pro vybran媒 den"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Tento po膷铆ta膷 je ji啪 na seznamu, nelze jej tedy p艡idat dvakr谩t.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emulovat t艡et铆 tla膷铆tko?"
+msgid ", USB printer"
+msgstr ", USB tisk谩rna"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Vyberte si typ va拧i my拧i."
+msgid "Choose the applications that will support the fonts:"
+msgstr "Zvolte aplikace, kter茅 podporuj铆 fonty:"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "P艡ipojit %s"
+msgid "Configure X"
+msgstr "Nastaven铆 X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Odpojit %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Tureck茅 (tradi膷n铆 model \"F\")"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varov谩n铆, bylo detekov谩no jin茅 p艡ipojen铆 k Internetu, z艡ejm臎 je pou啪ita s铆钮"
+msgid "Congratulations!"
+msgstr "Gratuluji!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "p艡ijato"
+msgid "Use owner id for execution"
+msgstr "Pou啪铆t p艡i spu拧t臎n铆 ID vlastn铆ka"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "p艡eneseno"
+msgid "Down"
+msgstr "Dol暖"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "p艡ijato: "
+msgid "Raw printer (No driver)"
+msgstr "P艡铆m媒 tisk (bez ovlada膷e)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "odesl谩no: "
+msgid "Install rpm"
+msgstr "Instalovat rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lok谩ln铆 m臎艡铆tko"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Vytisknout soubor z p艡铆kazov茅 艡谩dky (termin谩lov茅ho okna) lze bu膹 p艡铆kazem\n"
+"\"%s<soubor>\" nebo p艡es grafick茅 n谩stroje: \"xpp <soubor> nebo \"kprinter "
+"<soubor>\". Grafick茅 n谩stroje umo啪艌uj铆 jednodu拧e vybrat tisk谩rny a m臎nit "
+"jejich parametry.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "pr暖m臎r"
+msgid "Time remaining "
+msgstr "Zb媒vaj铆c铆 膷as "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Nastaven铆 barev"
+msgid "UK keyboard"
+msgstr "UK-Britsk茅"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"P艡ipojen铆 selhalo.\n"
-"Ov臎艡te nastaven铆 v ovl谩dac铆m centru Mandrake."
+msgid "Unmount"
+msgstr "Odpojit"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "P艡ipojen铆 ukon膷eno."
+msgid "Uninstall Fonts"
+msgstr "Odinstalovat fonty"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Odpojen铆 z Internetu ukon膷eno."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Odpojen铆 z Internetu selhalo."
+msgid "German (no dead keys)"
+msgstr "N臎meck茅 (bez mrtv媒ch kl谩ves)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "P艡ipojen铆 k Internetu"
+msgid "Transferring %s..."
+msgstr "P艡en谩拧铆m %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Odpojen铆 z Internetu "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tis铆c barev (15 bit暖)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "膶ekejte pros铆m, testuji p艡ipojen铆..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Nyn铆 lze prov茅st export p艡es protokol NFS nebo Samba. Vyberte pros铆m, kter媒 "
+"chcete pou啪铆t."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logy"
+msgid "Reboot"
+msgstr "Restartovat"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "Doba p艡ipojen铆: "
+msgid "Gambia"
+msgstr "Gambie"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Rychlost na p艡铆jmu:"
+msgid "Mandrake Control Center"
+msgstr "Ovl谩dac铆 centrum Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Odchoz铆 rychlost:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Zadali jste nespr谩vn媒 port.\n"
+"Spr谩vn臎 je nap艡铆klad: 139/tcp 139/udp.\n"
+"V铆ce se dozv铆te ze souboru /etc/services."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "Statistiky"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" Instala膷n铆 program dok谩啪e v臎t拧inou automaticky detekovat a spr谩vn臎 \n"
+"nastavit monitor p艡ipojen媒 k va拧emu po膷铆ta膷i. Pokud se to nezda艡铆, lze se\n"
+"seznamu vybrat monitor, kter媒 m谩te."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid "\t-Tape \n"
+msgstr "\t-P谩ska \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Monitorov谩n铆 s铆t臎"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"V syst茅mu nen铆 instalov谩n 啪谩dn媒 prohl铆啪e膷. Pokud chcete pou啪铆vat n谩pov臎du, "
+"je nutn茅 n臎jak媒 nainstalovat."
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Na膷铆t谩m data z instalovan媒ch tisk谩ren..."
+msgid "Remember this password"
+msgstr "Pamatovat si heslo"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "N谩zev/IP adresa po膷铆ta膷e:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Sd铆len铆 Internetov茅ho p艡ipojen铆 je nyn铆 zapnuto."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Tento po膷铆ta膷 je ji啪 na seznamu, nelze jej tedy p艡idat dvakr谩t.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-S铆t铆 p艡es SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Pokud byla po啪adovan谩 tisk谩rna automaticky nalezena, vyberte ji jednodu拧e "
+"ze seznamu a pokud je to pot艡eba, dopl艌te u啪ivatelsk茅 jm茅no, heslo, a "
+"pracovn铆 skupinu."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Mus铆te zadat n谩zev po膷铆ta膷e nebo IP adresu.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Pou啪铆t voln茅 m铆sto na Windows odd铆lu"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Zvolte po膷铆ta膷, na kter茅m budou p艡铆stupn茅 lok谩ln铆 skenery:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s nalezeno na %s, chcete ho nastavit automaticky?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Sd铆len铆 lok谩ln铆ch skener暖"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Argumenty: (arg)\n"
+"\n"
+"Pou啪ije heslo pro autentizaci u啪ivatel暖."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Tento po膷铆ta膷"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 ovlada膷: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Odstranit vybran媒 po膷铆ta膷"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Tento po膷铆ta膷/s铆钮 je ji啪 na seznamu, nelze jej znova p艡idat.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Upravit vybran媒 po膷铆ta膷"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Report programu DrackBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "P艡idat po膷铆ta膷"
+msgid "Choose the packages you want to install"
+msgstr "Vyberte si bal铆膷ky, kter茅 chcete nainstalovat"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Zde je seznam po膷铆ta膷暖, ze kter媒ch je mo啪n茅 vyu啪铆t skenery: "
+msgid "Papua New Guinea"
+msgstr "Papua Nov谩 Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Pou啪it铆 vzd谩len媒ch skener暖"
+msgid "Serbian (cyrillic)"
+msgstr "Srbsk茅 (cyrilice)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "V拧echny vzd谩len茅 po膷铆ta膷e"
+msgid "Make kernel message quiet by default"
+msgstr "Nevypisov谩n铆 hl谩拧ek j谩dra nastavit jako v媒choz铆"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Zde je seznam po膷铆ta膷暖, na kter媒ch jsou p艡铆stupn茅 lok谩ln臎 p艡ipojen茅 skenery: "
+"Chcete opravdu nastavit tisk谩rnu \"%s\"\n"
+"jako v媒choz铆?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Pou啪铆t skenery na po膷铆ta膷i: "
+msgid "The DHCP end range"
+msgstr "Konec p谩sma adres DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Pou啪铆t skenery na vzd谩len茅m po膷铆ta膷i"
+msgid "Creating bootdisk..."
+msgstr "Vytv谩艡铆m startovac铆 disketu"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Sd铆let skener pro po膷铆ta膷e: "
+msgid "Wait please, testing your connection..."
+msgstr "膶ekejte pros铆m, testuji p艡ipojen铆..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skenery na tomto po膷铆ta膷i jsou p艡铆stupn茅 i pro vzd谩len茅 po膷铆ta膷e"
+msgid "Bringing down the network"
+msgstr "Zastavuji s铆钮"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Zde m暖啪ete rozhodnout o tom, zda vzd谩len臎 p艡铆stupn茅 skenery budou vyu啪iteln茅 "
-"i na tomto po膷铆ta膷i."
+msgid "Login ID"
+msgstr "P艡ihla拧ovac铆 jm茅no"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Zde m暖啪ete nastavit, zda skenery, co jsou p艡ipojeny k tomuto po膷铆ta膷i, mohou "
-"b媒t vzd谩len臎 p艡铆stupn茅 a tak茅 p艡esn臎 z jak媒ch po膷铆ta膷暖."
+"NFS je obl铆ben媒 protokol pro sd铆len铆 soubor暖 p艡es s铆t臎 TCP/IP.\n"
+"Tato slu啪ba poskytuje mo啪nost uzamyk谩n铆 soubor暖 na NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Znovu generuji seznam nastaven媒ch skener暖..."
+msgid "DHCP Client"
+msgstr "DHCP klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Vyhled谩v谩m nov茅 skenery ..."
+msgid "dismiss"
+msgstr "odm铆tnout"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Vyhled谩v谩m nastaven茅 skenery ...."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Tisk/Skenov谩n铆 na \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Sd铆len铆 skeneru"
+msgid "omit raid modules"
+msgstr "vynechat RAID moduly"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "P艡idat skener ru膷n臎"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd je tiskov媒 d茅mon, bez kter茅ho nebude fungovat lpr (program pro tisk).\n"
+"Je to server, kter媒 pos铆l谩 ti拧t臎n茅 dokumenty jednotliv媒m tisk谩rn谩m."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Vyhled谩n铆 nov媒 skener暖"
+msgid "Internet Connection Configuration"
+msgstr "Konfigurace p艡ipojen铆 k internetu"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Na va拧em po膷铆ta膷i nebyly nalezeny 啪谩dn茅 p艡ipojen茅 skenery.\n"
+msgid "comma separated numbers"
+msgstr "膷谩rkou odd臎len谩 膷铆sla"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"V tomto po膷铆ta膷i je dostupn媒 skener\n"
-"\n"
-"%s\n"
+"Pokud vyberete n臎jak茅 za艡铆zen铆, uvid铆te o n臎m informace v prav茅m r谩mci "
+"(\"Informace\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Posunout vybran茅 pravidlo o 煤rove艌 v媒拧e"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"V tomto po膷铆ta膷i jsou dostupn茅 skenery\n"
+"V tomto po膷铆ta膷i je dostupn媒 skener\n"
"\n"
"%s\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"V谩拧 skener %s byl nastaven.\n"
-"Nyn铆 lze skenovat dokumenty pomoc铆 aplikace \"XSane\" z nab铆dky aplikac铆 "
-"Multim茅dia/Grafika."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "vyberte za艡铆zen铆"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Chcete opravdu odebrat tisk谩rnu \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Vyberte pros铆m za艡铆zen铆, ke kter茅mu je skener %s p艡ipojen"
+msgid "I can't find any room for installing"
+msgstr "Nem暖啪u naj铆t 啪谩dn茅 voln茅 m铆sto pro instalaci"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Vyhled谩v谩m skenery..."
+msgid "Default printer"
+msgstr "V媒choz铆 tisk谩rna"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Automaticky detekovat dostupn茅 porty"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"M谩te nastaveno v铆ce zp暖sob暖, jak se p艡ipojit k Internetu.\n"
+"Vyberte si jeden, kter媒 chcete pou啪铆t.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Pozn: Paraleln铆 porty nepou啪铆vaj铆 autodetekci)"
+msgid "Modify RAID"
+msgstr "Zm臎nit RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Skener %s mus铆 b媒t nastaven pomoc铆 n谩stroje PrinterDrake.\n"
-"Spustit PrinterDrake lze z ovl谩dac铆ho centra Mandrake v sekci Hardware"
+"Na拧el jsem ISDN PCI kartu, jej铆啪 typ ale nezn谩m. Pros铆m zvolte si jednu z "
+"n谩sleduj铆c铆ho seznamu PCI karet."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Skener %s nen铆 podporov谩n"
+msgid "Add user"
+msgstr "P艡idat u啪ivatele"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Skener %s nen铆 zat铆m v t茅to verzi Scannerdrake podporov谩n."
+msgid "RAID-disks %s\n"
+msgstr "RAID disky %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Tato verze Mandrake Linux %s nepodporuje."
+msgid "Liberia"
+msgstr "Lib茅rie"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Zadejte pros铆m n谩zev rozhran铆, kter茅 je p艡ipojeno k Internetu.\n"
+"\n"
+"P艡铆klady:\n"
+"\t\tppp+ pro modem nebo pro DSL p艡ipojen铆,\n"
+"\t\teth0 nebo eth1 pro p艡ipojen铆 p艡es kabel,\n"
+"\t\tippp+ pro isdn p艡ipojen铆.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "V媒b臎r kl谩vesnice"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Nalezen model: %s"
+msgid "Format partitions"
+msgstr "Form谩tov谩n铆 odd铆l暖"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatick谩 korekce nastaven铆 pro CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Zvolte si model skeneru"
+msgid "Running \"%s\" ..."
+msgstr "Spou拧t铆m \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s nen铆 v datab谩zi skener暖, nastavit ru膷n臎?"
+msgid "enable radio support"
+msgstr "Zapnout podporu r谩dia"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s nalezeno na %s, chcete ho nastavit automaticky?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Prob铆h谩 detekce hardware"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Byla p艡id谩na n臎kter谩 za艡铆zen铆:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "N臎kter谩 za艡铆zen铆 v t艡铆d臎 hardware \"%s\" byla odstran臎na:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Sd铆let skener pro po膷铆ta膷e: "
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"脷sp臎ch spole膷nosti MandrakeSoft je zalo啪en na principech Svobodn茅ho "
-"Software. Tento opera膷n铆 syst茅m je v媒sledkem spolupr谩ce 膷谩sti celosv臎tov茅 "
-"Linuxov茅 komunity"
+msgid "Loopback file name: %s"
+msgstr "Loopback soubor: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "V铆tejte do sv臎ta Open Source"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Vyberte tiskov媒 port, kam budou sm臎rov谩ny tiskov茅 煤lohy."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "D臎kujeme v谩m, 啪e jste si vybrali Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Nep艡en谩拧et tisk谩rny"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Chcete-li sd铆let sv茅 v臎domosti a pom谩hat vytv谩艡et n谩stroje pro Linux, "
-"p艡ipojte se do diskusn铆ch klub暖, kter茅 najdete na na拧ich str谩nk谩ch "
-"\"Community\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Prodleva p艡ed automatick媒m spu拧t臎n铆m"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Chcete v臎d臎t v铆ce o komunit臎 okolo Open Source? P艡ipojte se ke sv臎tu "
-"Svobodn茅ho Software!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Tvo艡te budoucnost Linuxu!"
+"\n"
+" Copyright 漏2001-2002 MandrakeSoft \n"
+"\tDUPONT Sebastien (p暖vodn铆 verze)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" Tento program je svobodn媒 software; m暖啪ete ho 拧铆艡it a/nebo modifikovat\n"
+" podle specifikace GNU General Public Licence, kter谩 byla publikov谩na\n"
+" Free Software Foundation; bu膹 verze 2, nebo (podle volby) pozd臎j拧铆 verze.\n"
+"\n"
+" Tento program je distribuov谩n s nad臎j铆, 啪e bude u啪ite膷n媒,\n"
+" ale BEZ JAK脻CHKOLIV Z脕RUK; BEZ N脕ROKU NA PROFIT. V铆ce detail暖 naleznete\n"
+" v licenci GNU General Public Licence.\n"
+"\n"
+" Kopii GNU General Public Licence m暖啪ete obdr啪et bu膹 s t铆mto programem\n"
+" nebo si o n铆 m暖啪ete napsat na adresu Free Software Foundation, Inc.,\n"
+" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Pod臎kov谩n铆:\n"
+" - pfm2afm: \n"
+"\t autor Ken Borgendale:\n"
+"\t P艡ev谩d铆 Windows .pfm soubor na .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t autor James Macnicol: \n"
+"\t type1inst generuje soubory fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t auto艡i Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" P艡ev谩d铆 soubory s ttf fonty na soubory afm a pfb\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 v谩m dovoluje naplno vyu啪铆t posledn铆 software pro "
-"p艡ehr谩v谩n铆 hudebn铆ch soubor暖, editovat 膷i pracovat s va拧imi obr谩zky nebo "
-"fotografiemi, 膷i sledovat video."
+msgid "Please check for multisession CD"
+msgstr "Zvolte pokud pou啪铆v谩te multisession CD"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Prohl铆啪ejte Web pomoc铆 prohl铆啪e膷e Mozilla nebo Konqueror, 膷t臎te po拧tu s "
-"Evolution nebo KMail, tvo艡te sv茅 dokumenty s OpenOffice.Org."
+msgid "user"
+msgstr "u啪ivatel"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft pro v谩s vybral ten nejlep拧铆 software"
+msgid "Use Hard Disk to backup"
+msgstr "Pou啪铆t pro z谩lohov谩n铆 pevn媒 disk"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 v谩m poskytuje Ovl谩dac铆 centrum Mandrake, mocn媒 n谩stroj "
-"pro pln茅 p艡izp暖soben铆 va拧eho po膷铆ta膷e va拧im pot艡eb谩m. Nastavte a p艡izp暖sobte "
-"si prvky jako 煤rove艌 zabezpe膷en铆, p艡铆davn谩 za艡铆zen铆 (obrazovku, my拧, "
-"kl谩vesnici...), p艡ipojen铆 k Internetu a daleko v铆ce!"
+msgid "Configure"
+msgstr "Nastavit"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "V铆ce煤膷elov媒 konfigura膷n铆 n谩stroj Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Bezvadn臎 p艡izp暖sobte v谩拧 po膷铆ta膷 va拧im pot艡eb谩m d铆ky 11 u啪ivatelsk媒m "
-"rozhran铆m, kter茅 jsou k dispozici v distribuci Mandrake Linux a kter茅 lze "
-"pln臎 upravovat: KDE 3.1, GNOME 2.2, WindowMaker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
+msgstr "Varov谩n铆, bylo detekov谩no jin茅 p艡ipojen铆 k Internetu, z艡ejm臎 je to s铆钮"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "P艡izp暖sobiteln茅 prost艡ed铆"
+msgid "Backup Users"
+msgstr "Z谩lohovat u啪ivatele"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Tvo艡it a upravovat v r暖zn媒ch jazyc铆ch jako Perl, Python, C a C++ nebylo "
-"nikdy tak jednoduch茅 d铆ky GNU gcc 3 a nejlep拧铆m v媒vojov媒m prost艡ed铆m ze "
-"sv臎ta Open Source."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Distribuce Mandrake Linux 9.1 je nejlep拧铆 v媒vojov谩 platforma."
+"Pros铆m zadejte n谩zev va拧eho po膷铆ta膷e.\n"
+"Tento n谩zev mus铆 b媒t 煤pln媒, jako 'mybox.mylab.myco.com'.\n"
+"Pokud pou啪铆v谩te br谩nu(gateway), m暖啪ete tak茅 zadat jej铆 adresu"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"V谩拧 po膷铆ta膷 lze n臎kolika klepnut铆mi my拧i zm臎nit na velmi v媒konn媒 Linuxov媒 "
-"server: webov媒 server, po拧tovn铆 server, firewall, router, souborov媒 a "
-"tiskov媒 server, ..."
+msgid "Select Printer Spooler"
+msgstr "Zvolte tiskov媒 syst茅m pro tisk谩rnu"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Vytvo艡te se sv茅ho po膷铆ta膷e spolehliv媒 server."
+msgid "Create new theme"
+msgstr "Vytvo艡it nov茅 t茅ma"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"N谩拧 elektronick媒 obchod nab铆z铆 ucelenou 艡adu na拧ich Linuxov媒ch 艡e拧en铆, "
-"stejn臎 jako speci谩ln铆 nab铆dky na拧ich produkt暖 a dal拧铆 \"lah暖dky\":"
+msgid "Mandrake Tools Explanation"
+msgstr "Vysv臎tlivky n谩stroj暖 Mandrake Linuxu"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Ofici谩ln铆 obchod spole膷nosti MandrakeSoft"
+msgid "No image found"
+msgstr "Obraz nebyl nalezen"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Roz拧i艡te obzory sv茅ho po膷铆ta膷e s n臎kter媒mi z 拧irok茅 艡ady partner暖, kte艡铆 "
-"nab铆zej铆 profesion谩ln铆 slu啪by kompatibiln铆 s distribuc铆 Mandrake Linux."
+"N臎kter茅 d暖le啪it茅 bal铆膷ky nebyly spr谩vn臎 nainstalovan茅.\n"
+"Je mo啪n茅, 啪e je po拧kozen CD disk nebo CD-ROM mechanika.\n"
+"Zkontrolujete to pou啪it铆m p艡铆kazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
-"Z铆skejte to nejlep拧铆 se Strategick媒mi partnery distribuce Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Nalezen model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft navrhl exkluzivn铆 n谩stroje pro tvorbu dosud nejbezpe膷n臎j拧铆 "
-"verze Linuxu: DrakSec, n谩stroj pro spr谩vu bezpe膷nosti syst茅mu, a siln媒 "
-"firewall, kter茅 spolu spolupracuj铆 a do zna膷n茅 m铆ry omezuj铆 riziko "
-"nep艡谩telsk茅ho pr暖niku."
+"Spr谩vce p艡ihl谩拧en铆 pro X11 umo啪艌uje se p艡ihl谩sit p艡es grafick茅\n"
+"rozhran铆 k be啪铆c铆mu syst茅mu X Window a podporuje spu拧t臎n铆 r暖zn媒ch\n"
+"X sezen铆 na lok谩ln铆m po膷铆ta膷i sou膷asn臎."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimalizujte va拧e zabezpe膷en铆"
+msgid "if set to yes, run the daily security checks."
+msgstr "pokud je nastaveno, spou拧t铆 ka啪d媒 den bezpe膷nostn铆 kontrolu."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Tento produkt je k dispozici na webov媒ch str谩nk谩ch MandrakeStore."
+msgid "Azerbaijan"
+msgstr "脕zerb谩jd啪谩n"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Dokon膷ete va拧e nastaven铆 bezpe膷nosti s t铆mto snadno pou啪iteln媒m software, "
-"kter茅 kombinuje velmi v媒konn茅 komponenty jako firewall, server a klient "
-"virtu谩ln铆 soukrom茅 s铆t臎 (VPN), syst茅m detekce pr暖niku a spr谩vce provozu."
+msgid "No tape in %s!"
+msgstr "Nen铆 p谩ska v %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Zabezpe膷te va拧e s铆t臎 s produktem Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvo艡谩k (US) "
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"P艡ipojte se k t媒m暖m podpory spole膷nosti MandrakeSoft a on-line Linuxov茅 "
-"komunit臎, sd铆lejte sv茅 znalosti a pomozte ostatn铆m t铆m, 啪e se stanete "
-"uzn谩van媒m Expertem na webov媒ch str谩nk谩ch on-line technick茅 podpory:"
+"toto je fyzick谩 sb臎rnice, na kterou je p艡ipojeno za艡铆zen铆 (nap艡. PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Nalezn臎te 艡e拧en铆 va拧ich probl茅m暖 pomoc铆 on-line platformy spole膷nosti "
-"MandrakeSoft pro podporu"
+msgid "How is the printer connected?"
+msgstr "Jak je tisk谩rna p艡ipojena?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Sta艌te se Mandrake Expertem"
+msgid "Security level"
+msgstr "脷rove艌 zabezpe膷en铆"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"V拧echny incidenty budou sledov谩ny vyhrazen媒m kvalifikovan媒m technick媒m "
-"expertem spole膷nosti MandrakeSoft."
+msgid "final resolution"
+msgstr "kone膷n茅 rozli拧en铆"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Online platforma odpov铆daj铆c铆 specifick媒m pot艡eb谩m podpory spole膷nost铆."
+msgid "Services"
+msgstr "Slu啪by"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19444,10 +19482,6 @@ msgstr ""
"procesory (KSpread, Gnumeric), prohl铆啪e膷e PDF a dal拧铆"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovn铆 stanice"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Hry"
@@ -19520,10 +19554,6 @@ msgstr ""
"n谩stroj暖"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafick茅 prost艡ed铆"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Pracovn铆 stanice s Gnome"
@@ -19544,10 +19574,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "IceWM, Window Maker, Enlightenment, Fvwm a dal拧铆"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "V媒voj"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Knihovny pro v媒voj v C a C++, programy a hlavi膷kov茅 soubory"
@@ -19616,34 +19642,97 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server, SMB server, Proxy server, SSH server"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Pr谩ce se zvukem"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Kolekce n谩stroj暖 pro 膷ten铆 a pos铆lan铆 el. po拧ty a p艡铆sp臎vk暖 do diskusn铆ch "
+"skupin a pro prohl铆啪en铆 Webu"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Programy pro p艡ehr谩v谩n铆/editaci zvuku"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Nastaven铆 a p艡ipojen铆 k internetu"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video"
+#~ msgid "Configure the connection"
+#~ msgstr "Nastavit p艡ipojen铆"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Programy pro p艡ehr谩v谩n铆 videa"
+#~ msgid "Disconnect"
+#~ msgstr "Odpojit"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Grafick谩 stanice"
+#~ msgid "Connect"
+#~ msgstr "P艡ipojit"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafick茅 programy"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "M暖啪ete p艡ekonfigurovat p艡ipojen铆."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Kolekce n谩stroj暖 pro 膷ten铆 a pos铆lan铆 el. po拧ty a p艡铆sp臎vk暖 do diskusn铆ch "
-"skupin a pro prohl铆啪en铆 Webu"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Nem暖啪ete se p艡ipojit k Internetu nebo p艡ekonfigurovat p艡ipojen铆."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "V sou膷asnosti nejste p艡ipojeni k Internetu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "M暖啪ete se odpojit nebo p艡ekonfigurovat p艡ipojen铆."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "V sou膷asnosti jste p艡ipojeni k Internetu"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "soubory poslan茅 p艡es FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Pou啪铆t p艡铆r暖stkovou z谩lohu (nep艡episovat star拧铆 z谩lohy)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Znovu spustit 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Prov茅st initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Zapsat %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kop铆ruji %s do %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Z谩lohuji %s do %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "konverze ttf font暖"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Konverze font暖"
+
+#~ msgid "Author:"
+#~ msgstr "Autor:"
+
+#~ msgid "Audio station"
+#~ msgstr "Pr谩ce se zvukem"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programy pro p艡ehr谩v谩n铆/editaci zvuku"
+
+#~ msgid "Video station"
+#~ msgstr "Video"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Programy pro p艡ehr谩v谩n铆 videa"
+
+#~ msgid "Graphic station"
+#~ msgstr "Grafick谩 stanice"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Grafick茅 programy"
#~ msgid "Printer sharing"
#~ msgstr "Sd铆len铆 tisk谩rny"
@@ -19693,9 +19782,6 @@ msgstr ""
#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "Laserov谩 tisk谩rna GDI pou啪铆vaj铆c铆 form谩t Zenographics ZJ-Stream"
-#~ msgid "%s"
-#~ msgstr "%s"
-
#~ msgid "Office"
#~ msgstr "Kancel谩艡"
@@ -19882,12 +19968,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -20002,8 +20086,7 @@ msgstr ""
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -20062,8 +20145,7 @@ msgstr ""
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -20072,7 +20154,7 @@ msgstr ""
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
@@ -20094,8 +20176,7 @@ msgstr ""
#~ "doporu膷eno\n"
#~ "pou啪铆t pr谩v臎 tento tiskov媒 syst茅m.\n"
#~ "\n"
-#~ " * \"CUPS\"'Common Unix Printing System' je vynikaj铆c铆 v tisku na "
-#~ "lok谩ln铆\n"
+#~ " * \"%s\"'Common Unix Printing System' je vynikaj铆c铆 v tisku na lok谩ln铆\n"
#~ "tisk谩rny stejn臎 jako p艡i tisku na tisk谩rnu na druh茅 stran臎 planety. "
#~ "Nastaven铆\n"
#~ "je jednoduch茅 a m暖啪e fungovat jako klient i server pro klienty z \"lpd\"\n"
@@ -20228,7 +20309,7 @@ msgstr ""
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
@@ -20238,7 +20319,7 @@ msgstr ""
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
@@ -20267,7 +20348,7 @@ msgstr ""
#~ "tla膷铆tko \"Dal拧铆 ->\" a instalace bude pokra膷ovat dal拧铆m krokem."
#~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"Zem臎\": zkontrolujte aktu谩ln铆 v媒b臎r zem臎. Pokud ne啪ijete v t茅to zemi,\n"
@@ -20334,14 +20415,13 @@ msgstr ""
#~ msgid ""
#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"Next ->\" to reboot the system. The first "
-#~ "thing\n"
+#~ "ready to use. Just click \"%s\" to reboot the system. The first thing\n"
#~ "you should see after your computer has finished doing its hardware tests "
#~ "is\n"
#~ "the bootloader menu, giving you the choice of which operating system to\n"
#~ "start.\n"
#~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
@@ -20852,9 +20932,6 @@ msgstr ""
#~ "Bu膹to pou啪ijete LILO a nebude to fungovat, nebo nepou啪ijete LILO a tedy "
#~ "nepot艡ebujete /boot"
-#~ msgid "Upgrade"
-#~ msgstr "Aktualizovat"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Chcete nastavit dal拧铆 tisk谩rnu?"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
index 6e1ad2da9..7cffd8142 100644
--- a/perl-install/share/po/cy.po
+++ b/perl-install/share/po/cy.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-cy2\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-12 19:36-0000\n"
"Last-Translator: Rhoslyn Prys <rhoslyn.prys@meddal.org.uk>\n"
"Language-Team: Cymraeg <rhoslyn.prys@meddal.org.uk>\n"
@@ -15,958 +15,1913 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"os wedi ei osod i iawn, , gwirio ychwanegu/tynnu ffeiliau gwraidd suid."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tDileu=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "porth argraffydd rhwydwaith"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Mewnosodwch ddisg meddal:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Mae'r rhannu yn 么l defnyddiwr yn defnyddio grwp \"rhannu ffeiliau\" .\n"
-"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp. "
+"Nid yw'r tabl rhaniad wrth gefn yr un maint\n"
+"Parhau?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Diddymu"
+msgid "Which username"
+msgstr "Pa enw defnyddiwr"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Cychwyn userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Adfer y tabl rhaniad"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Ar wasanaethwr CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Ffurfweddiad 么l osod"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Defnyddiwch \"%s\" yn lle hynny"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Math"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Hoffech chi ganiat谩u i rai defnyddwyr rannu eu cyfeiriaduron?\n"
-"Bydd caniat谩u hyn yn gadael i ddefnyddwyr glicio ar \"Rhannu\" yn konqueror "
-"a nautilus.\n"
"\n"
-"\"Addasu\" caniat谩u cyfran i'r defnyddwyr.\n"
+"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
+"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Mae pecyn gorfodol %s ar goll"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi ei "
-"ddefnyddio?"
+"Mae'r argraffydd canlynol\n"
+"\n"
+"%s%s\n"
+"wedi ei gysylltu'n uniongyrchol 芒'ch system"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
+msgid "Central African Republic"
+msgstr "Central African Republic"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Arddull"
+msgid "Gateway device"
+msgstr "Dyfais mynedfa"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Caniat谩u pob defnyddiwr"
+msgid "Net Method:"
+msgstr "Dull Rhwyd:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Peidio rhannu"
+msgid "Ethernetcard"
+msgstr "Cerdyn Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Rhagor"
+msgid "Parameters"
+msgstr "Paramedrau"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Dyma restr lawn o'r gwledydd sydd ar gael"
+msgid "Auto-detect"
+msgstr "Awtoganfod"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Dewiswch eich gwlad."
+msgid "Interface:"
+msgstr "Rhyngwyneb:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Dewis dosbarth gosod"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Gwlad"
+msgid "on CDROM"
+msgstr "ar CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Pob iaith"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Nid yw'n ymddangos i'ch system gysylltu 芒'r Rhyngrwyd.\n"
+"Ailffurfweddwch eich cysylltiad."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Defnyddio Unicode drwy rhagosodiad"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Cysylltu eich argraffydd i wasanaethwr Linux a gadael i'ch peiriant/"
+"peiriannau Windows gysylltu iddo fel cleient.\n"
+"\n"
+"Ydych chi am barhau i osod yr argraffydd hwn?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Belarus"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Gwall wrth ysgrifennu i ffeil %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Gallwch ddewis ieithoedd eraill fydd ar gael ar 么l gosod. Dewiswch\n"
-"pa iaith yr hoffech ei osod. Byddant ar gael pan fydd eich gosodiad\n"
-"wedi ei gwblhau a phan fyddwch yn ailgychwyn eich system."
+"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a mewngofnodi drwy\n"
+"syslog. Mae modd ei ddefnyddio i gau'r peiriant pan mae'r batri'n isel."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Dewiswch iaith i'w defnyddio."
+msgid "Use tape to backup"
+msgstr "Defnyddiwch d芒p i gadw wrth gefn"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
+msgid "The following packages are going to be installed"
+msgstr "Mae'r pecynnau canlynol i'w gosod"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Dewis y defnyddiwr rhagosodedig:"
+msgid "CUPS configuration"
+msgstr "Furfweddiad CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Ydych chi eisiau defnyddio'r nodwedd?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mewngofnodi'n awtomatig ar gyfer un defnyddiwr."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Awtomewngofnodi"
+msgid "Moving"
+msgstr "Symud"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Eicon"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Gweithgaredd Drakbackup drwy %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Cragen"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Cyfrinair (eto)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
+"\n"
+"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
+"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Cyfrinair"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Enw defnyddiwr"
+msgid "Lebanon"
+msgstr "Lubanus"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Enw cywir"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Derbyn defnyddiwr"
+msgid "Stop"
+msgstr "Aros"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Gorffen"
+msgid "Edit selected host"
+msgstr "Golygu'r gwesteiwr"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Rhowch enw defnyddiwr\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "Heb ddiffinio dyfais CD!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Ychwanegu defnyddiwr"
+msgid "Bulgarian (phonetic)"
+msgstr "Bwlgaraidd (ffonetig)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
+msgid "The DHCP start ip"
+msgstr "Enw cychwyn DHCP"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "Mae'r enw defnyddiwr yn rhy hir"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Prif ddewisiadau Bootloader"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Rhowch enw defnyddiwr"
+msgid "Tape"
+msgstr "T芒p"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Mae'r cyfrinair yn rhy syml"
+msgid "Scanning network..."
+msgstr "Chwilio'r rhwydwaith..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Ceisiwch eto"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
+"o'ch cyfeiriadur /etc."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Nid yw'r cyfrineiriau'n cydfynd"
+msgid "Malaysia"
+msgstr "Malaysia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(wedi ychwanegu %s yn barod)"
+msgid "Swiss (French layout)"
+msgstr "Swisaidd (gosodiad Ffrengig)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "mynediad i offer crynhoad"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "methodd mkraid (efallai bod raidtools ar goll)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "mynediad i offer rhwydwaith"
+msgid "Webcam"
+msgstr "Webcam"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Maint storfa cpu (ail lefel)"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "mynediad i ffeiliau gweinyddol"
+msgid "Soundcard"
+msgstr "Cerdyn sain"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "caniat谩u \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
+"orchymyn \"%s <file>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "mynediad i offer rpm"
+msgid "Level %s\n"
+msgstr "Lefel %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "mynediad i raglenni X"
+msgid "Luxembourg"
+msgstr "Luxembourg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Dyma'r cofnodion gwahanol ar eich dewislen cychwyn hyd yma.\n"
-"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
+"\n"
+" Adroddiad Daemon DrakBackup \n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Systemau gweithredu Eraill (windows...)"
+msgid "Iran"
+msgstr "Iran"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Systemau Gweithredu Eraill (MacOS...)"
+msgid "Bus"
+msgstr "Bws"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Systwmau Gweithredu eraill (SunOS..)"
+msgid "Iraq"
+msgstr "Irac"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
+msgid "Configuring..."
+msgstr "Ffurfweddu..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Rhaid pennu rhaniad gwraidd"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Ar gyfer y rhelyw o gardiau Teledu diweddar, mae modiwl bttv cnewyllyn GNU/"
+"Linux yn awto ganfod y paramedrau cywir.\n"
+"Os yw'ch cerdyn yn cael ei ganfod ar gam, mae modd gorfodi'r mathau cywir o "
+"gerdyn a rheolydd. Dewiswch baramedrau eich cerdyn teledu os oes raid"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Rhaid enwi delwedd cnewyllyn"
+msgid "Password (again)"
+msgstr "Cyfrinair (eto)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Nid yw label gwag yn cael ei ganiat谩u"
+msgid "Search installed fonts"
+msgstr "Chwilio am ffontiau wedi eu gosod"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Rhagosodedig"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "Cyfeiriad IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Maint intrd"
+msgid "Choose the sizes"
+msgstr "Dewiswch y maint"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Atodi"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Rhestr o ddata llwgr:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Label"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Nid yw'r system yn cynnal eich modem.\n"
+"Ewch i http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Anniogel"
+msgid "Choose another partition"
+msgstr "Dewiswch raniad arall"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Tabl"
+msgid "Current user"
+msgstr "Derbyn presennol"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Gwraidd"
+msgid "Username"
+msgstr "Enw defnyddiwr"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Darllen-ysgrifennu"
+msgid "Left \"Windows\" key"
+msgstr "Bysell \"Windows\" chwith"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Modd fideo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Defnydd cyfeiriadur:\n"
+" dim ond perchennog y cyfeiriadur neu ffeil yn y cyfeiriadur hwn fydd yn "
+"cael ei ddileu."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Delwedd"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "System Weithredu Rhagosodedig?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Galluogi Cychwyn OF?"
+msgid "Remove a module"
+msgstr "Tynnu modiwl"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Galluogi cychwyn o CD?"
+msgid "Password"
+msgstr "Cyfrinair"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Goramser cychwyn y cnewyllyn"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Ymresymiadau: (max, inactive=-1)\n"
+"\n"
+"Gosod cyfrinair yn erbyn \\fImax\\fP dyddiau ac oedi i newid i \\fIinactive"
+"\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Agor Oedi Cadarnwedd"
+msgid "Advanced Configuration"
+msgstr "Ffurfweddiad Uwch"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dyfais cychwyn"
+msgid "Scanning on your HP multi-function device"
+msgstr "Sganio eich dyfais amlbwrpas HP"
#: ../../any.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Neges Init"
+msgid "Root"
+msgstr "Gwraidd"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader ar waith"
+msgid "Choose an existing RAID to add to"
+msgstr "Dewis RAID presennol i ychwanegu ato"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Prif ddewisiadau Bootloader"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Twrcaidd (model modern \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "Heb ganfod neges lilo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
+"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
+"gyfer /usr/include/linux{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Rhowch maint RAM mewn MB"
+msgid "if needed"
+msgstr "os oes angen"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Galluogi aml-broffil"
+msgid "Restore Failed..."
+msgstr "Methodd Adfer..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Union faint o RAM os oes angen (canfod %dMB)"
+msgid "/Autodetect _jazz drives"
+msgstr "/Awtoganfod_gyrrwr jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Disgrifiad:\n"
+"\n"
+" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
+" eich ffeiliau system wrth gefn.\n"
+" Yn ystod y ffurfweddiad medrwch ddewis:\n"
+"\t- Ffeiliau system,\n"
+"\t-Ffeiliau defnyddwyr,\n"
+"\t-Ffeiliau eraill.\n"
+"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
+"\n"
+" Mae Drackbackup yn caniat谩u i chi ddefnyddio:\n"
+"\t- Disg Caled.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
+"\t- FTP.\n"
+"\t-Rsync.\n"
+"\t- Webdav.\n"
+"\t- T芒p.\n"
+"\n"
+" Mae Drakbackup yn caniat谩u i chi adfer eich system i\n"
+" gyfeiriadur o ddewis y defnyddiwr.\n"
+"\n"
+" Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Ffeil ffurfweddiad:\n"
+"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
+"\n"
+"\n"
+"Camau wrth adfer:\n"
+" \n"
+" Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
+" eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
+" ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
+" gadw wrth gefn cyn adfer.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Creu disg cychwyn"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Cyflwyniad\n"
+"\n"
+"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
+"Mandrake Linux yn\n"
+"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
+"Meddalwedd yn\n"
+"cynnwys, ond heb eu cyfyngu, i'r casgliad o raglenni , dulliau, rheolau a "
+"dogfennau mewn\n"
+"perthynas 芒'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
+"Linux.\n"
+"\n"
+"\n"
+"1. Cytundeb Trwyddedu\n"
+"\n"
+"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
+"rhyngoch\n"
+"chi 芒 MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
+"\n"
+"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
+"rydych yn\n"
+"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
+"hon.\n"
+"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiat芒d i "
+"osod, dyblygu\n"
+"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
+"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
+"modd\n"
+"nad yw'n cyd-fynd 芒 thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
+"terfynu eich\n"
+"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
+"ddinistrio'n syth pob\n"
+"copi o'r Cynnyrch Meddalwedd.\n"
+"\n"
+"\n"
+"2. Gwarant Gyfyngedig\n"
+"\n"
+"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
+"\"fel ag y maent\",\n"
+"heb ddim gwarant, hyd y mae'r gyfraith yn caniat谩u.\n"
+"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
+"y bydd y gyfraith yn\n"
+"caniat谩u, am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
+"anuniongyrchol (gan\n"
+"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
+"ariannol, costau cyfreithiol,\n"
+"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
+"defnydd neu'r anallu i\n"
+"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
+"cynghori o'r posibilrwydd\n"
+"o'r fath iawn.\n"
+"\n"
+"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
+"FEDDALWEDD\n"
+" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
+"\n"
+"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
+"bydd y gyfraith yn caniat谩u,\n"
+"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
+"neu anuniongyrchol (gan gynnwys\n"
+"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
+"costau cyfreithiol, a chosb o ganlyniad\n"
+"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
+"cydrannau meddalwedd o un o safleoedd\n"
+" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
+"gyfreithiau lleol. Mae'r\n"
+"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
+"cryptograffiaeth cryf sy'n cael\n"
+"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
+"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
+"\n"
+"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
+"bersonau a endidau gwahanol.\n"
+"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
+"amodau Trwydded Gyhoeddus\n"
+"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
+"ato o hyn ymlaen fel \"GPL\", neu\n"
+"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniat谩u i chi "
+"ddefnyddio, dyblygu, addasu neu\n"
+" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
+"trwydded pob cydran cyn\n"
+"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
+"gydran ac nid i MandrakeSoft.\n"
+"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
+"Drwydded GLP. Mae'r dogfennau\n"
+" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
+"benodol. Darllenwch y dogfennau\n"
+"am fwy o fanylion.\n"
+"\n"
+"4. Hawliau Eiddo Deallusol\n"
+"\n"
+"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
+"perthnasol ac wedi eu hamddiffyn\n"
+"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
+"meddalwedd. Mae MandrakeSoft yn cadw\n"
+"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
+"drwy unrhyw ddull ac ar gyfer\n"
+"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\" a'r logos cysylltiedig "
+"yn nodau masnachol sy'n\n"
+"perthyn i MandrakeSoft S.A.\n"
+"\n"
+"5. Cyfreithiau Llywodraethol\n"
+"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
+"anghyfreithlon neu amherthnasol gan\n"
+"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
+"yn parhau i fod yn rhwymedig\n"
+"i adrannau cymwys o'r cytundeb.\n"
+"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
+"Ffrainc. Mae'n ddymunol y\n"
+"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
+"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
+"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch 芒 "
+"MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "restrict"
-msgstr "cyfyngu"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"bar cynnydd cydfesuryn x\n"
+"yn ei gornel uchaf chwith"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Cyfyngu dewisiadau llinell orchymyn"
+msgid "Current interface configuration"
+msgstr "Ffurfweddiad rhyngwyneb cyfredol"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgr卯n nesaf fod yn gywir.\n"
+"\n"
+"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "Peidiwch argraffu tudalennau prawf"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Peidio Gorfodi APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Galluogi ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
+msgid "[keyboard]"
+msgstr "[bysellfwrdd]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "cryno"
+msgid "FTP proxy"
+msgstr "Dirprwy FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Compact"
-msgstr "Cryno"
+msgid "Install List"
+msgstr "Gosod Rhestr"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Gosodiad Bootloader"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Newid\n"
+"Llwybr Adfer"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Adran gyntaf o'r rhaniad cychwyn"
+msgid "Show only for the selected day"
+msgstr "Dangos ar y diwrnod penodol yn unig"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Adran gyntaf o'r gyrrwr (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"Trosolwg drakTermServ\n"
+"\t\t\t \n"
+" - Crea Delwedd Cychwynydd Galluogi Etherboot:\n"
+" \t\tI gychwyn y cnewyllyn drwy etherboot, rhaid creu delwedd "
+"cnewyllyn/initrd arbennig.\n"
+" \t\tmae tmkinitrd-net yn gwneud llawer o'r gwaith ac mae drak "
+"termServ yn rhyngwyneb graffigol iddo\n"
+" \t\ti gynorthwyo rheoli/addasuto help manage/customize these "
+"images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Lle rydych chi eisiau gosod y cychwynnydd?"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Gosodiad LILO/grub"
+msgid "Logs"
+msgstr "Cofnodion"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Gosodiad SILO"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Sylwer: Nid oes modd awtoganfod pyrth paralel)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Hepgor"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Ar Ddisg Meddal"
+msgid "What kind of card do you have?"
+msgstr "Pa fath o gerdyn sydd gennych?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Adran gyntaf o'r rhaniad gwraidd"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Diogelwch"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Rydych wedi penderfynu gosod y cychwynnydd ar raniad.\n"
-"Mae hyn yn awgrymu bod gennych gychwynnydd ar ddisg caled eisoes: (ee System "
-"Commander).\n"
+"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
+"a thrin gwaith argraffu.\n"
"\n"
-"Gyda pha ddisg ydych chi'n cychwyn?"
+"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
+"argyfwng\", eicon ar y bwrdd gwaith, wedi ei labelu \"Atal yr Argraffydd!\", "
+"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
+"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Creu disg cychwyn"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Rhowch ddisg meddal yn %s"
+msgid "Unknown"
+msgstr "Anhysbys"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+"Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu eto.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Ail ddisg meddal"
+msgid "Network Configuration"
+msgstr "Ffurfweddiad y Rhwydwaith"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First floppy drive"
-msgstr "Gyrrwr disg meddal cyntaf"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Nid oes gyrrwr disg meddal ar gael"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protocol ar gyfer gweddill y byd\n"
+" dim D-Channel (llinell les)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Rhaid i ddewis %s fod yn rhif!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Nodyn"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
-"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
-"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
-"dileu\n"
-"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
-"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
-"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
-"greu disg cychwyn ar gyfer eich system?\n"
-"%s"
+"Ymresymiadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi gwiriad diogelwch dyddiol."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Ymresymiadau: (arg)\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
+"Galluogi/Analluogi crontab ac at ar gyfer defnyddwyr. Rhoi defnyddwyr 芒 "
+"chniat芒d yn\n"
+"/etc/cron.allow a /etc/at.allow\n"
+" (gw. man yn(1) a crontab(1))."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Nid ydych wedi ffurfweddu X. Ydych chi'n siwr eich bod am wneud hyn?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Bydd ffurfweddi'r argraffydd yn digwydd yn awtomatig. Os na chafodd eich "
+"argraffydd ei ganfod yn gywir neu byddai'n well gennych ffurfweddiad unigryw "
+"i'ch argraffydd, cychwynnwch \"Ffurfweddiad gyda Llaw\"."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Pa fath o raniad ?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
msgstr ""
+"rhestr ffeil yrrwyd gan FTP: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Rhyngwyneb"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
+"disgrifiad o'r dewisiadau:\n"
+"\n"
+"- Ffeiliau system Cadw wrth Gefn\n"
+" \n"
+"\tMae'r dewis hwn yn caniat谩u i chi gadw wrth gefn eich\n"
+"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
+"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
+"\n"
+"\tMae'r dewis hwn yn caniat谩u i chi ddewis pob defnyddiwr\n"
+"\trydych am gadw wrth gefn ar eu cyfer.\n"
+"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
+"\t porwr.\n"
+" \n"
+"- Cadw Ffeiliau Eraill wrth Gefn\n"
+"\n"
+"\tMae'r dewis hwn yn caniat谩u i chi ychwanegu mwy\n"
+"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
+"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
+"\tcynyddol.\t\t\n"
+"\n"
+"Cadw wrth Gefn Cynyddol:\n"
+"\n"
+"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
+"\tMae'r dewis hwn yn caniat谩u i chi gadw eich data wrth\n"
+"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
+"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
+"\tdata o ddyddiad penodol.\n"
+"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
+"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn. \n"
"\n"
"\n"
-"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
-"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
-"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
-"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
-"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
-"SILO'n\n"
-"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
-"cychwyn\n"
-" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
-"adfer o\n"
-" fethiannau systemig sylweddol\n"
+"Ymresymiadau: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
-"gyrrwr\n"
-" cyntaf a chliciwch \"Iawn\"."
+"Galluogi/Analluogi adroddiadau syslog i consol 12. \\fIexpr\\fP yw'r \n"
+"disgrifiad o beth iw' gofnodi (gw. syslog conf(5) am wyboodaeth) a\n"
+"dev y ddyfais i greu cofnod."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Nid oes modd gosod y cychwynnydd ar raniad %s\n"
+msgid "comma separated strings"
+msgstr "llinellau collnod ranedig"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "dim digon o le yn /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Dyma'r cyfrifiaduron ddylai'r sganwyr fod ar gael:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
+msgid "Messages"
+msgstr "Negeseuon"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "gorchmynion cyn cychwyn, neu 'c' am y llinell orchymyn."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Anhysbys|CPH06X (bt878) [nifer o werthwyr]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
+msgid "POP and IMAP Server"
+msgstr "Gwasanaethwr POP ac IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
+msgid "Mexico"
+msgstr "Mecsico"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
+msgid "Model stepping"
+msgstr "Stepio model"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Oes gennych unrhyw rhyngwyneb %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO gyda dewislen testun"
+msgid "Switzerland"
+msgstr "Y Swisdir"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "Lilo gyda dewislen graffigol"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Dewisiadau Argraffydd lpd Pell"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Croeso i %s y dewiswr systemau gweithredu! \n"
+"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
+"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
+"blaen.\n"
+"Gallwch ddarllen yr \"Starter Guide\" i ddysgu mwy. Ond yn anhebyg i "
+"\"gwraidd\",\n"
+"sef y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n "
+"medru\n"
+"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
+"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
+"mewngofnodi\n"
+"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
+"fel\n"
+"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
+"eic\n"
+"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr fel defnyddiwr\n"
+"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
+"gyfan.\n"
"\n"
-"Dewiswch system weithredu o'r rhestr uchod neu\n"
-"arhoswch %d eiliad am gychwyn rhagosodedig\n"
+"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs - mae modd\n"
+"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
+"yn\n"
+"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
+"fewngofnodi i'r system. Mae modd ei newid. Yna rhowch gyfrinair. Nid yw\n"
+"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
+"diogelwch\n"
+"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
+"mewn\n"
+"perygl\n"
+"\n"
+"Os wnewch chi glicio \"Derbyn defnyddiwr\", bydd modd ychwanegu fanint\n"
+"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
+"neu eich chwaer, e.e. Ar 么l ychwanegu'r holl ddefnyddwyr, cliciwch \"Nesaf ->"
+"\".\n"
"\n"
+"Bydd clicio'r botwm \"Uwch\" yn caniat谩u i chi newid y \"cragen\" "
+"rhagosodedig\n"
+"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper ar goll"
+msgid "Configure Internet Access..."
+msgstr "Ffurfweddu Mynediad i'r We..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu ar goll"
+msgid "Norway"
+msgstr "Norwy"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Bydd lluniau o'r sgr卯n ar gael ar 么l gosod yn %s"
+msgid "Danish"
+msgstr "Danaidd"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Meth creu lluniau o'r sgr卯n cyn rhannu"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
+"ac XFree wrth gychwyn y peiriant."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d eiliad"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
+"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
+"(e.e.1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 munud"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mae gosodiad Mandrake Linux yn cynnwys nifer o CD-ROMau. Mae DrakX\n"
+"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
+"allan y CD cyfredol a gofyn am y llall."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d munud"
+msgid "Processors"
+msgstr "Prosesyddion"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bwlgaria"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "Heb ddewis NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen Islands"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
+"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
+"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Yr Unol Daleithiau"
+msgid "partition %s is now known as %s"
+msgstr "Mae rhaniad %s yn cael ei alw'n %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Awstria"
+msgid "Backup Other files..."
+msgstr "Cadw wrth gefn ffeiliau eraill..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Yr Eidal"
+msgid "SMB server IP"
+msgstr "IP Gwasanaethwr SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Yr Iseldiroedd"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Sweden"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Mae tabl rhaniad gyrrwr %s yn mynd i gael ei ysgrifennu i'r ddisg!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norwy"
+msgid "Installing HPOJ package..."
+msgstr "Gosod pecyn HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Groeg"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
+"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
+"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
+"dileu\n"
+"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
+"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
+"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
+"greu disg cychwyn ar gyfer eich system?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Yr Almaen"
+msgid ", USB printer \\#%s"
+msgstr ", argraffydd USB \\#\"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Gweriniaeth Tsiec"
+msgid "Latvian"
+msgstr "Latfiaidd"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Gwlad Belg"
+msgid "monthly"
+msgstr "bob mis"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Ffrainc"
+msgid "Module name"
+msgstr "Enw'r modiwl"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Cychwyn y peiriant"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
+msgid "First sector of drive (MBR)"
+msgstr "Adran gyntaf o'r gyrrwr (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Dim i'w wneud"
+msgid "Joystick"
+msgstr "Ffon hud"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nid oes digon o le ar gyfer awtoddynodi"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nid oes modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
+msgid "Use Unicode by default"
+msgstr "Defnyddio Unicode drwy rhagosodiad"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Mae angen gwir system ffeilio (ext2, reiserfs, xfs, neu jfs)) ar gyfer y "
-"pwynt gosod\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "y modiwl o'r cnewyllyn GNU/Linux sy'n trin y ddyfais honno"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dylai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
+msgid "Trying to rescue partition table"
+msgstr "Yn ceisiio achub y tabl rhaniadau"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
+msgid "Option %s must be an integer number!"
+msgstr "Rhaid i ddewis %s fod yn gyfanrif"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
-"Nid oes cychwynnydd yn medru trin hwn heb rhaniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
+"Gwybodaeth i'w gyflawyno:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Mae yna eisoes raniad gyda phwynt gosod %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Methu cychwyn diweddariad byw!!! \n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Dylai enw'r pwyntiau gosod gynnwys llythrennau a rhifau'n unig"
+msgid "Name: "
+msgstr "Enw :"
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Rhaid i bwyntiau gosod gynnwys / arweiniol"
+msgid "16 million colors (24 bits)"
+msgstr "16 miliwn o liwiau (24 did)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
+msgid "Allow all users"
+msgstr "Caniat谩u pob defnyddiwr"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Does dim modd defnyddio JFS ar raniadau llai na 16MB"
+msgid "The official MandrakeSoft Store"
+msgstr "Y siop MandrakeSoft swyddogol"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Newid maint"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Cysylltiad cebl"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Defnyddiwr"
#: ../../fsedit.pm:1
#, c-format
@@ -985,1330 +1940,259 @@ msgstr ""
"\n"
"Ydych chi'n cytuno i golli'r holl raniadau?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Gwall"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
+"yn unig )"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "Gwasanaethwr"
+msgid "Printer on parallel port \\#%s"
+msgstr "Argraffydd ar borth paralel \\#\"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "gyda /usr"
+msgid "Name"
+msgstr "Enw"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "syml"
+msgid "mkraid failed"
+msgstr "methodd mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Galluogi rhaniad cyfnewid %s"
+msgid "Button 3 Emulation"
+msgstr "Efelychiad Botwm 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gwall dadosod %s: %s"
+msgid "Sending files..."
+msgstr "Anfon ffeiliau..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "methodd gosod rhaniad %s yng nghyfeiriadur %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelaidd (Ffonetig)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Yn fformatio rhaniad %s"
+msgid "access to rpm tools"
+msgstr "mynediad i offer rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Gwirio %s"
+msgid "edit"
+msgstr "golygu"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creu a fformatio ffeil %s"
+msgid "Permission problem accessing CD."
+msgstr "Anhawsterau caniat芒d wrth gael mynediad i'r CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
+msgid "Phone number"
+msgstr "Rhif ff么n"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "methodd fformatio %s o %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Gwall. Nid yw gyrrwr \"%s\" wedi ei restru"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n "
-"bresennol\n"
-"ar y disg. Byddwch ofalus, wedi i chi glicio \"Iawn ->\" ni fydd modd i chi\n"
-"adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys\n"
-"data Windows.\n"
-"\n"
-"Cliciwch \" <- Blaenorol\" i atal y weithred hon heb golli unrhyw ddata\n"
-"a rhaniadau sy'n bresennol ar y ddisg galed."
+msgid "Printer name, description, location"
+msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
-"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
-"cael ei ddileu ac ni fydd modd ei adfer!"
+msgid "USA (broadcast)"
+msgstr "UDA (darlledu)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"I grynhoi, bydd DrakX yn cyflwyno crynodeb o'r wybodaeth amrywiol\n"
-"sydd ganddo am eich system. Yn ddibynnol ar eich caledwedd, mae'n bosib\n"
-"bod gennych rywfaint o'r nodweddion canlynol. Mae pob cofnod yn cynnwys\n"
-"eitem ffurfweddadwy, a chrynodeb o'r ffurfweddiad presennol. Cliciwch ar y\n"
-"botwm \"Ffurfweddu\" perthnasol i'w newid.\n"
-"\n"
-" *\"Bysellfwrdd\": gwirio ffurfweddiad map y bysellfwrdd a'i newid os oes "
-"angen.\n"
-"\n"
-" *\"Gwlad\": gwirio'r dewis iaith. Os nad ydych yn y wlad hon, cliciwch y "
-"botwm\n"
-"\"Ffurfweddu\" a dewis un arall. Os nad yw eich gwlad ar y rhestr gyntaf "
-"i'w\n"
-"dangos, cliciwch y botwm \"Rhagor\" am y rhestr gyflawn o wledydd.\n"
-"\n"
-" *\"Parth Amser\": Mae DrakX yn dyfalu eich parth amser yn 么l y wlad rydych\n"
-"wedi ei dewis. Mae modd clicio ar y botwm\"Ffurfweddu\" i'w gywiro.\n"
-"\n"
-" *\"Llygoden\": gwirio ffurfweddiad y llygoden bresennol a chlicio ar y "
-"botwm\n"
-"i'w newid os oes angen.\n"
-"\n"
-" \"Argraffydd\": bydd clicio ar y botwm \"Ffurfweddu\" yn agor y dewin\n"
-"ffurfweddu argraffydd. Darllenwch y pennawd yn y \"Starter Guide\" ar\n"
-"sut i osod argraffydd newydd. Mae'r rhyngwyneb yn debyg i'r un ar gyfer\n"
-"ei osod yn y man cyntaf.\n"
-"\n"
-" *\"Cerdyn sain\": os oes cerdyn sain wedi ei ganfod ar eich system bydd\n"
-"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sy'n cael ei\n"
-"ddangos yw'r un sydd ar eich system, yna cliciwch y botwm a dewis\n"
-"gyrrwr arall.\n"
-"\n"
-" *\"Rhyngwyneb Graffigol\": fel rheol bydd DrakX yn gosod eich rhyngwyneb\n"
-"i gydraniad \"800x600\" neu \"1024x768\". Os nad yw hyn yn addas ar\n"
-"eich cyfer cliciwch y botwm \"Ffurfweddu\" i'w newid.\n"
-"\n"
-" *\"Cerdyn Teledu\": os oes cerdyn teledu wedi ei ganfod ar eich system\n"
-"bydd yn cael ei ddangos yma. Os oes gennych gerdyn ac nid yw wedi cael\n"
-"ei ganfod, cliciwch \"Ffurfweddu\" i geisio ei ffurfweddu 芒 llaw.\n"
-"\n"
-" *\"Cerdyn ISDN\": os oes cerdyn ISDN wedi ei ganfod ar eich system bydd\n"
-"yn cael ei ddangos yma. Mae modd clicio ar \"Ffurfweddu\" i newid y\n"
-"paramedrau sy'n gysylltiedig 芒'r cerdyn.\n"
-"\n"
-" *\"Rhwydwaith\": os ydych am ffurfweddu eich mynediad i'r Rhyngrwyd neu\n"
-"eich rhwydwaith lleol.\n"
-"\n"
-" *\"Lefel Diogelwch\": mae modd ail ddiffinio'r lefel diogelwch osodwyd yn\n"
-"flaenorol ().\n"
-"\n"
-" *\"Mur Cadarn\": mae'n syniad da gosod mur cadarn i'ch amddiffyn rhag\n"
-"ymyriadau os ydych yn bwriadu cysylltu eich cyfrifiadur 芒'r Rhyngrwyd.\n"
-"Darllennwch y bennod perthnasol yn y \"Starter Guide\" am fanylion\n"
-"gosodiadau mur cadarn.\n"
-"\n"
-" *\"Cychwynnydd\": os hoffech newid ffurfweddiad eich cychwynnydd\n"
-"cliciwch y botwm honno. Ar gyfer defnyddwyr profiadol.\n"
-"\n"
-" *\"Gwasanaethau\": yma bydd modd i chi wneud man newidiadau i'r\n"
-"gwasanaethau sy'n cael eu rhedeg ar eich cyfrifiadur. Os ydych yn\n"
-" bwriadu defnyddio'r cyfrifiadur fel gwasanaethwr mae'n syniad da\n"
-"darllen y gosodiadau'n fanwl."
+"Dewiswch y cyfrwng ar\n"
+"gyfer cadw wrth gefn..."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Cerdyn sain\": os yw cerdyn sain yn cael ei ganfod ar eich cyfrifiadur, "
-"bydd \n"
-"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sydd ar eich\n"
-"cyfrifiadur sy'n cael ei ddangos, yna cliciwch ar y botwm a dewis\n"
-" gyrrwr arall."
+msgid "Use Xinerama extension"
+msgstr "Defnyddiwch estyniad Xinerama"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yw'r cychwynnydd ar gyfer caledwedd NewWorld MacIntosh. Mae'n\n"
-"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant.\n"
-"Fel rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u\n"
-"gosod. Os nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod\n"
-"gyda llaw ar y sgr卯n hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
-"\n"
-"Prif ddewisiadau Yaboot yw:\n"
-"\n"
-" * Cychwyn Neges: neges testun syml sy'n cael ei ddangos cyn yr anogwr\n"
-" cychwyn\n"
-"\n"
-" * Cychwyn y Ddyfais: yn dangos lle rydych am osod yr wybodaeth\n"
-"angenrheidiol i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu\n"
-"rhaniad ymlwythwr yn gynt, i ddal yr wybodaeth.\n"
-"\n"
-" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael\n"
-"gyda yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn\n"
-"mae modd dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
-"\n"
-" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwynLILO. "
-"Wedi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn\n"
-"rhagosodedig yn cael ei ddewis.\n"
-"\n"
-" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniat谩u i chi ddewis \"C\"\n"
-"am CD ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * Galluogi Cychwyn OF?: mae dewis hwn yn caniat谩u i chi ddewis |\"N\"\n"
-"am Open Firmware ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu\n"
-"fydd yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
+msgid "Loopback"
+msgstr "Cylch-么l"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
-"gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
-"\n"
-"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r\n"
-"rhaniad root yn unig\n"
-"\n"
-"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
-"\n"
-" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis ydewis "
-"cychwyn.\n"
-"\n"
-" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
-"amrywiad ohono gydag estyniad\n"
-"\n"
-" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
-"\n"
-" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
-"ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i\n"
-"alluogi efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r "
-"trydydd\n"
-"botwm llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
-"cychwynnol,\n"
-" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
-" cychwyn argyfwng.\n"
-"\n"
-" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
-"angen\n"
-"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
-"\n"
-" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
-"yn unig, i\n"
-" ganiat谩u gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
-"modd\n"
-" diystyru'r dewis hwn.\n"
-"\n"
-" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anawsterau "
-"sylweddol,\n"
-" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
-" ffr芒m byffer cynhenid\n"
-"\n"
-" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
-" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
-"chi\n"
-" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
+"Methu cau mkbootdisk yn iawn: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Bydd DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
-"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn\n"
-"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
-"\n"
-"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd,\n"
-"gall DrakX fethu canfod eich dsgiau caled. Os felly, bydd rhaid i chi bennu\n"
-"eich caledwedd 芒 llaw.\n"
-"Os ydych wedi pennu eich addaswr PCI SCS gyda llaw, bydd DrakX yn\n"
-"gofyn i chi ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX "
-"ofyn\n"
-"i'r cerdyn am ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu\n"
-"cychwyn. Mae hyn fel rheol yn gweithio'n dda\n"
-"\n"
-"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
-" chi ffurfweddu'r gyrrwr gyda llaw. "
+msgid "West Europe"
+msgstr "Gorllewin Ewrop"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
-"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig dwy.\n"
-"Mae 'r systemau'n addas gar gyfer ffurfweddiad arbennig.\n"
-"\n"
-" *\"pdq\" - sy'n golygu \"print, don't queue\", yw'r dewis os oes gennych\n"
-"gysylltiad uniongyrchol 芒'ch argraffydd a'ch bod eisiau medru tynnu allan o "
-"waith\n"
-"argraffu pan fo'r papur wedi mynd yn sownd ac nad oes gennych argraffyddion\n"
-"wedi eu cysylltu drwy rwydwaith. (\"Dim ond rhwydweithiau syml mae \"pdq\" "
-"yn ei\n"
-"drin ac mae'n araf ar rwydweithiau) Dewiswch \"pdq\" os mai dyma yw eich\n"
-"tro cyntaf yn GNU/Linux.\n"
-" *\"CUPS\" - \"Common Unix Printing System\". Mae hwn yn dda ar gyfer\n"
-"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
-"yn\n"
-"medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
-"\"\n"
-"felly mae'n cydweddi 芒'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
-"gwneud\n"
-"nifer o driciau, ond mae bron mor syml i'w osod \"pdq\". Os ydych amgen "
-"hwn\n"
-"i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-lpd\".\n"
-"Mae gan \"CUPS\" wyneb graffigol ar gyfer argraffu neu rheoli'r argraffu.\n"
+"[DEWISIADAU] [ENW_RHAGLEN]\n"
"\n"
-"Os ydych yn dewis yn awr ac yn ddiweddarach yn penderfynu eich bod\n"
-"am newid eich system argraffu gallwch ei newid drwy gyfrwng PrinterDrake\n"
-"yng Nghanolfan Rheoli Mandrake a chlicio'r botwm arbenigwr."
+"DEWISIADAU:\n"
+" --help - argraffu'r neges cymorth.\n"
+" --report - dylai'r rhaglen fod yn un o offer mandrake\n"
+" --incident - ylai'r rhaglen fod yn un o offer mandrake"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"Cychwynnydd GNU/Linux yw LILO a grub. Fel rheol mae'r rhan yma'n\n"
-"digwydd yn awtomatig. Bydd DrakX yn dadansoddi'r adran cychwyn\n"
-"disg a gweithredu yn 芒'r yr hyn mae'n ei ganfod yno.\n"
-"\n"
-" *os yw'n canfod adran cychwyn Windows, bydd yn ei amnewid gyda\n"
-"adran cychwyn grub/LILO. O ganlyniad bydd modd i chi gychwyn un\n"
-"ai GNU/Linux neu system arall.\n"
-"\n"
-" *os fydd adran gychwyn grub neu LILO'n cael ei ganfod bydd yn ei\n"
-"amnewid gydag un mwy diweddar.\n"
-"\n"
-"Os nad yw'n medru penderfynu, bydd DrakX yn gofyn i chi lle i osod\n"
-"y cychwynnydd.\n"
-"\"Dyfais cychwyn\": fel rheol ni fydd angen i chi newid o'r rhagosodedig\n"
-"(\"Adran gyntaf gyrrwr (MBR)\"), ond os yw'n well gennych mae modd\n"
-"gosod y cychwynnydd ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn\n"
-"oed, ar ddisg meddal (\"Disg Meddal\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 fersiwn %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Ar 么l ffurfweddu paramedrau cyffredinol y cychwynnwr, bydd y rhestr o\n"
-"ddewisiadau cychwyn ar gael wrth gyvchwyn yn cael eu harddangos.\n"
-"\n"
-"Os oes yna systemau gweithredu eraill ar eich cyfrifiadur byddant yn cael\n"
-"eu hychwanegu i'r ddewislen cychwyn. Mae modd addasu'r dewisiadau\n"
-"eraill dwy glicio \"Ychwanegu\" i greu cofnod newydd; dewis cofnod\n"
-"a chlicio \"Newid\" neu \"Tynnu\" i'w nweid neu ei dynnu. Mae \"Iawn\"\n"
-"yn gwirio'r newidiadau\n"
-"\n"
-"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb\n"
-"arall fydd yn mynd i'r consol ac yn ailgychwyn y cyfrifiadur. Gallwch "
-"ddileu'r\n"
-"cofnodion perthnasol o'r system weithredu i'w tynnu o ddewislwn y\n"
-"cychwynnwr,ond bydd rhaid i chi greu disg cychwyn ar gyfer y systemau\n"
-"gweithredu eraill rheini!"
+msgid "Copying %s"
+msgstr "Cop茂o %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Mae'r deialog yn caniatau i chi wenud m芒n newidiadau i'ch cychwynnwr:\n"
-"\n"
-" * \"Cychwynnydd i'w ddefnyddio\": mae gennych dri dewis:\n"
-"\n"
-" * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
-"\n"
-" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
-"rhagwyneb graffigol.\n"
-"\n"
-" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
-"dewislen\n"
-"testun.\n"
-"\n"
-" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
-"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y\n"
-"cychwynnydd gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd\n"
-"yn oed ar ddisg meddal (\"/dev/fd0\")\n"
-"\n"
-" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
-"cyfrifiadur\n"
-"dyma'r oedi sy'n caniat谩u i'r defnyddiwr ddewis o fewn y ddewislen "
-"cychwynnydd,\n"
-"cychwynnydd arall yn lle'r un rhagosodedig.\n"
-"\n"
-"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
-"yma),\n"
-"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
-"Mandrake.\n"
-"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
-"y\n"
-"dewisiadau hyn!!\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
-"uwch,\n"
-"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol."
+msgid "Choose color"
+msgstr "dewis lliw"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
-"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd 芒'r "
-"hawl\n"
-"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
-"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
-"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
-" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
-" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
-" peidiwch 芒 meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
-" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
-" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
-"rhaniad,\n"
-" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
-"bod\n"
-" yn \"root\".n\n"
-"\n"
-"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
-"hyd.\n"
-" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
-"hawdd\n"
-" gwanhau'r system.\n"
-"\n"
-"Er hynny, peidiwch 芒 gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
-"i\n"
-"chi fedri ei gofio heb ormod o drafferth.\n"
-"\n"
-"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
-"Felly bydd\n"
-" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
-"Os ydych\n"
-"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
-"cyfrinair\n"
-" \"anghywir\" i gychwyn y tro cyntaf.\n"
-"\n"
-"Os hoffech i fynediad i'r cyfrifiadur gael ei reoli gan wasanaethwr dilysu, "
-"cliciwch\n"
-"y botwm \"Uwch\".\n"
-"Os yw eich rhwydwaith yn defnyddio protocol gwasanaethau dilysu LDAP, NIS\n"
-"neu PDC Windows Domain, dewiswch un addas fel \"dilysu\",\n"
-"Os nad ydych yn gwybod, gofynnwch i'ch gweinyddwr rhwydwaith\n"
-"\n"
-"Os ydych yn cael anhawsterau atgoffa cyfrineiriau, gallwch ddewis\n"
-"\"Dim cyfineiriau\", os na fydd eich cyfrifiadur yn cael cyswllt 芒'r we ac "
-"rydych\n"
-"yn ymddiried yn y defnyddiwr."
+msgid "Dominican Republic"
+msgstr "Dominican Republic"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
-"yn\n"
-"\"ttyS0\" yn GNU/Linux, e.e."
+msgid "Swaziland"
+msgstr "Swaziland"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm\n"
-"a bydd yn ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig\n"
-"p'un a'i yw'n lygoden PS/2, cyfresol neu USB.\n"
-"\n"
-" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
-"rhestr.\n"
-"\n"
-"Os byddwch yn dewis llygoden ar wah芒n i'r rhagosodedig, byddwch yn gweld\n"
-"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
-"fod\n"
-"y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch\n"
-"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto.\n"
-"\n"
-"Weithiau ni fydd llygod olwyn yn cael eu canfod yn awtomatig. Bydd rhaid i "
-"chi\n"
-"eu dewis o'r rhestr. Gwnewch yn siwr eich bod yn dewis yr un sy'n cyfateb "
-"i'r porth\n"
-"mae wedi ei gysylltu iddo. Wedi i chi wasgu'r botwm \"Nesaf ->\" bydd "
-"delwedd\n"
-"llygoden yn cael ei ddangos. Bydd angen i chi symud olwyn y llygoden iddo \n"
-"weithio'n gywir. Wrth i chi wedl yr olwyn sgroli ar y sgr卯n yn symud wrth i "
-"chi droi'r\n"
-"olwyn, profwch y botymau a gwirio fod cyfeirydd y llygoden yn symud ar y "
-"sgrin\n"
-"wrth i chi symud eich l;lygoden."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system yn\n"
-"effeithio iaith y ddogfennaeth, y gosodwr a'r system yn gyffredinol.\n"
-"Dewiswch eich ardal ac yna eich iaith.\n"
-"\n"
-"Bydd clicio ar y botwm \"Uwch\" yn caniat谩u i chi ddewis ieithoedd eraill\n"
-"i'w gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod\n"
-"ffeiliau penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd\n"
-" hynny. Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen,\n"
-" dewiswch \"Gymraeg\" fel y brif iaith yng ngolwg coeden ac yn yr Uwch\n"
-" cliciwch ar y seren lwyd sy'n cyfateb i \"Sbaeneg\". \n"
-"\n"
-"Sylwer bod modd gosod mwy nag un iaith. Mae modd i chi ddewis mwy\n"
-"nag un, neu hyd yn oed eu gosod i gyd, drwy ddewis y blwch \"Pob iaith\".\n"
-"Mae dewis cefnogaeth i bob iaith yn golygu gosod cyfieithiadau, ffontiau, \n"
-"gwiryddion sillafu, ag ati, ar gyfer yr iaith honno.Yn ychwanegol mae dewis\n"
-"\"Defnyddio Unicode\" yn gorfodi'r system i ddefnyddio unicode (UTF-8).\n"
-"Sylwer mai nodwedd arbrofol yw hon . Os ydych yn dewis ieithoedd\n"
-"gwahanol sy'n defnyddio amgodiad gwahanol bydd y cefnogaeth i utf-8\n"
-"yn cael ei osod, beth bynnag.\n"
-"\n"
-"I newid rhwng yr ieithoedd amrywiol sydd ar y system medrwch gychwyn\n"
-"y gorchymyn \"/usr/sbin/localedrake\" fel \"gwraidd\" i newid yr iaith\n"
-"sy'n cael ei ddefnyddio gan y system gyfan. Bydd rhedeg y gorchymyn fel\n"
-"defnyddiwr cyffredin yn gweithio dim ond ar gyfer yr unigolyn hwnnw."
+msgid "Please check if you are using CDRW media"
+msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
#: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
-"ddibynnu pa\n"
-" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
-"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
-"os ydych\n"
-"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
-"bysellfwrdd\n"
-"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
-" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn 么l i'r cam yma "
-"yn y\n"
-" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
-"\n"
-"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
-"cael eu\n"
-" cynnal.\n"
-" \n"
-"Os fyddwch yn dewis cynllun bysellfwrdd wedi ei seilio ar wyddor an-"
-"Lladinaidd, \n"
-"bydd y deialog nesaf yn caniat谩u i chi ddewis rwymiad allwedd fydd yn newid "
-"y\n"
-"bysellfwrdd rhwng cynlluniau Lladin ac an-Lladin."
+"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
+"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
+"cael ei ddileu ac ni fydd modd ei adfer!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Mae'r cam hwn yn cael ei weithredu os oes hen raniad GNU/Linux wedi\n"
-"ei ganfod ar y cyfrifiadur.\n"
-"\n"
-"Bydd DrakX angen gwybod a ydych am osod o'r newydd neu uwchraddio\n"
-"system Mandrake Linux presennol.\n"
-"\n"
-" *\"Gosod\" Ar y cyfan, mae hwn yn tynnu'r hen system gyfan oddi ar eich\n"
-"cyfrifiadur. Os ydych am newid rhaniadau eich disgiau caled, neu newid y\n"
-"system ffeil, dylech ddewis hwn. Er hynny, yn ddibynnol ar eich trefn\n"
-"rhannu, mae modd atal peth o'ch data rhag cael ei ysgrifennu drosto gan\n"
-"y gosodiad newydd.\n"
-" *\"Uwchraddio\": mae'r dosbarth gosod hwn yn caniat谩u i chi ddiweddaru'r\n"
-"pecynnau sydd wedi eu gosod ar eich system Mandrake Linux. Bydd eich\n"
-"rhaniadau presenol a'ch data personol yn cael eu cadw. Bydd y rhan fwyaf\n"
-"o'r camau ffurfweddu ar gael fel gyda'r gosod arferol.\n"
-"\n"
-"Dylai defnyddio \"Uwchraddio\" weithio'n iawn ar systemau Mandrake Linux\n"
-"sy'n rhedeg systemau \"8.1\" neu'n ddiweddarach. Nid yw uwchraddio\n"
-"fersiynau cyn Mandrake Linux \"8.1\" yn cael ei gymeradwyo."
+msgid " on parallel port \\#%s"
+msgstr " ar borth paralel \\#\"%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Gwlad\":gwiriwch y dewis gwlad. Os nad ydych yn y wlad hon\n"
-"cliciwch y botwm \"Ffurfweddu\"a dewis un arall. Os nad yw eich\n"
-"gwlad ar y rhestr gyntaf, cliciwch \"Rhagor\" i wdrych ar y rhestr\n"
-"gyflawn."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
-"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
-"system weithredu Mandrake Linux newydd\n"
-"\n"
-"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
-"\"Maint\".\n"
-"\n"
-"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
-"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
-"\n"
-"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
-"a \"sd\" yw disg caled SCSI.\n"
-"\n"
-"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
-"Gyda disgiau caled IDE:\n"
-"\n"
-" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
-"\n"
-" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
-"\n"
-"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
-" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
-"\n"
-"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
-" Windows (\"C:\" yw'r ddisg neu raniad cyntaf)."
+msgid "Generic 2 Button Mouse"
+msgstr "Llygoden 2 Fotwm Generig"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
-"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
-"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
-"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
-"ddisg caled gael eu diffinio.\n"
-"\n"
-"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
-"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
-"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
-"\n"
-"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
-"\n"
-" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
-"\n"
-" *\"Awto ddynodi\": mae'r dewis hwn yn caniat谩u i chi greu'n awtomatig\n"
-"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
-"\n"
-" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
-"\n"
-" *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
-"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
-"\n"
-" \"Adfer y tabl rhaniad\": mae hyn yn caniat谩u adfer tabl rhaniad "
-"blaenorol\n"
-"o ddisg meddal.\n"
-"\n"
-" \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
-"modd\n"
-"ceisio ei adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
-"fethu.\n"
-"\n"
-" \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
-"lwytho'r\n"
-"tabl rhaniad gwreiddiol.\n"
-"\n"
-" *\"Awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
-"osod\n"
-"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
-"\n"
-" *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
-"rannu\n"
-"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
-"rhannu\n"
-"\n"
-" *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
-"\n"
-" *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniat谩u "
-"gweithredoedd\n"
-"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
-" wybodaeth.\n"
-"\n"
-" *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
-" eich newidiadau yn 么l i'r ddisg\n"
-"\n"
-"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
-" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
-"\n"
-"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
-"\n"
-" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
-"\n"
-" *Ctrl-d i ddileu rhaniad;\n"
-"\n"
-" *Ctrl-m i greu pwynt gosod;\n"
-"\n"
-"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
-"y\n"
-" pennawd ar ext2fs yn y ``Reference Manual''.\n"
-"\n"
-"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
-" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
-"yaboot.\n"
-"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
-"gall fod yn le defnyddiol i gadw cnewyllyn sb芒r a delweddau ramdisk ar "
-"gyfer\n"
-" sefyllfaoedd cychwyn argyfyngus!"
+msgid "Remove the logical volumes first\n"
+msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
-"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
-"ddylai'r lefel diogelwch fod neu fod gan y peiriant gysylltiad uniongyrchol\n"
-"gyda'r rhyngrwyd. Er hynny, mae diogelwch yn dod ar draul\n"
-"hwylustod. \n"
-"\n"
-"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
-"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
-"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiat谩u\n"
-"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
-"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol 芒'r rhyngrwyd,\n"
-"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
-"\n"
-"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
-"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
-"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
-"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
+"Methu ysgrifennu /etc/sysconfig/bootsplash.\\\\\n"
+"Heb ganfod y ffeil"
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Mynediad i'r Rhyngrwyd"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
-"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
-"\n"
-"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
-"data\n"
-"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
-"\n"
-"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
-"Rhaid \n"
-"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
-"\"\n"
-"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
-"data rydych am ei gadw (e.e. \"/home\").\n"
-"\n"
-"Byddwch ofalus wrth ddewis rhaniadau. Ar 么l fformatio bydd yr holl ddata ar\n"
-"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
-"\n"
-"Cliciwch \"Nesaf ->\" pan ydych yn barod i fformatio rhaniadau.\n"
-"\n"
-"Cliciwch \"<- Cynt\" os ydych am ddewis rhaniad arall ar gyfer eich "
-"gosodiad\n"
-"Mandrake Linux newydd\n"
-"\n"
-"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
-"gwallus ar y ddisg."
+"blwch testun cydfesuryn y\n"
+"mewn rhif nodau"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
-"yn barod i'w ddefnyddio. Cliciwch \"Nesaf ->\" i ailgychwyn y cyfrifiadur.\n"
-"Mae modd i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd\n"
-"orau gennych (os oes gennych y ddwy system ar eich peiriant), gynted\n"
-"ag y bydd eich peiriant yn ail gychwyn. \n"
-"\n"
-"Mae'r botwm \"Uwch\" yn dangos dau fotwm arall:\n"
-"\n"
-" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
-"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
-"newydd ei ffurfweddu.\n"
-"\n"
-"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
-"\n"
-" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu\n"
-"rhaniad yn cael ei hepgor.\n"
-"\n"
-" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
-"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
-"\n"
-"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o\n"
-"beiriannau tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
-"\n"
-" *\"Cadw'r dewis o becynnau\":(*): mae hyn yn cadw'r dewis o becynnau\n"
-"wnaed cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y\n"
-"gyrrwr a rhedeg y gosodiad gan fynd i'r sgr卯n cymorth drwy wasgu'r fysell\n"
-"[F1], a chyflwyno >>linux defcfg=\"disg meddal\"<<.\n"
-"\n"
-"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn\n"
-"GNU/Linux, teipiwch \"mformat a:\")"
+"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
+"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Galluogi gwasanaethwyr..."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printing test page(s)..."
+msgstr "Argraffu tudalen(nau) prawf..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Mae yna eisoes raniad gyda phwynt gosod %s\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -2326,51 +2210,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Yn awr mae angen i chi ddewis lle ar eich disg caled i osod eich\n"
"system weithredu Linux Mandrake. Os yw eich disg caled yn wag neu\n"
@@ -2434,280 +2316,138 @@ msgstr ""
"ydych yn ei wneud.. Am rhagor o wybodaeth ar sut i ddefnyddio DiskDrake, \n"
"darllennwch adran \"Managing your Partitions\" yn y \"Starter Guide\"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
-"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
-"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
-"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
-"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
+msgid "Ukraine"
+msgstr "Wcrain"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
-"ar eich cyfer."
+msgid "Application:"
+msgstr "Rhaglen"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Cydraniad\n"
-"\n"
-" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
-"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
-"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
-"ar y dangosydd."
+msgid "External ISDN modem"
+msgstr "Modem IDSN Allanol"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Dangosydd\n"
-"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y dangosydd sy'n gysylltiedig 芒'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich dangosydd."
+msgid "if set to yes, report check result by mail."
+msgstr "os wedi ei osod i iawn, adrodd y gwirio drwy e-bost"
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Eich dewis? (rhagosodedig %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Datrys problemau"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (sef X System) yw calon rhyngwyneb graffigol GNU/Linux a'r hyn mae'r\n"
-"holl amgylcheddau graffigol (KDE, Gnome, AterStep, WindowMaker, etc)\n"
-"sy'n dod gyda Mandrake Linux yn dibynnu arno.\n"
-"\n"
-"Byddwch yn derbyn rhestr o baramedrau gwahanol i'w newid i gael\n"
-"y dangosiad graffigol gorau: Cerdyn Graffig\n"
-"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich cerdyn.\n"
-"\n"
-" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
-"ar eich cyfer.\n"
-"\n"
+"Prawf gwall sain - rhedeg y gorchmynion canlynol:\n"
"\n"
-"Dangosydd\n"
"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y dangosydd sy'n gysylltiedig 芒'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich dangosydd.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" pa yrrwyr i'w defnyddio\n"
+"drwy ragosodiad\n"
"\n"
-"Cydraniad\n"
+"- \"grep sound-slot /etc/modules.conf\" pa yrrwyr mae'n defnyddio\n"
+"ar hyn o bryd\n"
"\n"
-" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
-"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
-"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
-"ar y dangosydd.\n"
+"- \"/sbin/lsmod\" gwirio os yw ei yrrwr wedi ei lwytho\n"
+"a'i peidio\n"
"\n"
-"Prawf\n"
+"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" dangos\n"
+"os yw sain a gwasanaethau alsa services sydd wedi eu ffurfweddu yn rhedwg\n"
+"ar initlevel 3\n"
"\n"
-" bydd y system yn ceisio agor sgr卯n graffigol yn unol 芒'r cydraniad "
-"dewisol.\n"
-"Os ydych yn gweld y neges yn ystod y prawf ac ateb \"Iawn\", yna bydd\n"
-"DrakX yn symud ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges nesaf\n"
-"mae'n golygu fod rhan o'r drefn awtoganfod yn anghywir a bydd y prawf\n"
-"yn dod iben ar 芒l 12 eiliad, gan ddod a chi n么l i'r ddewislen. Newidiwch y\n"
-"gosodiadau nes i chi gael y sgr卯n i edrych yn iawn.\n"
-"Dewisiadau\n"
+"- \"aumix -q\" a yw'r sain wedi ei ddistewi a'i peidio\n"
"\n"
-" Yma cewch ddewis p'un ai i drefnu i'ch cyfrifiadur newid yn awtomatig i\n"
-"rhyngwyneb graffigol wrth gychwyn. Yn amlwg byddwch angen ticio \"Iawn\"\n"
-"os yw eich peiriant i weithredu fel gwasanaethwr, neu os na fuoch yn\n"
-"llwyddiannus yn ffurfweddu'r dangosydd."
+"- \"/sbin/fuser -v /dev/dsp\" pa rhaglen sy'n defnyddio'r cerdyn sain.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Cerdyn Greaffig\n"
-"\n"
-" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich cerdyn o'r rhestr.\n"
+"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
+"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
+"Statws argraffu:\n"
+"%s\n"
"\n"
-" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
-"ar eich cyfer."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"Mae GNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)\n"
-"a'i drosi i amser lleol yn 么l y parth amser rydych wedi ei ddewis.\n"
-"Mae'n bosib dad-ddewis hyn drwy ddad-ddewis \"Cloc caledwedd wedi ei\n"
-"osod i GMT\" fel bod y cloc caledwedd yr un a chloc y system yr un peth.\n"
-"Mae hyn yn ddefnyddiol pan fo'r peiriant yn westai i system arall megis\n"
-"Windows.\n"
-"\n"
-"Bydd y dewis \"Cydamseriad amser awtomatig\" yn rheoli'r cloc yn awtomatig\n"
-"drwy gysylltu 芒 gwasanaethwr amser ar y Rhyngrwyd. Yn y rhestr sy'n cael ei\n"
-"gynnig dewiswch yr agosaf atoch. Rhaid i'ch cyswllt 芒'r we fod yn gweithio\n"
-"i hyn ddigwydd. Bydd yn gosod ar eich peiriant wasanaethwr amser fydd\n"
-"o ddewis yn medru cael ei ddefnyddio gan beiriannau eraill ar eich "
-"rhwydwaith."
+msgid "daily"
+msgstr "bob dydd"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Dewiswch pa wasanaethau rydych am eu cael wrth gychwyn eich cyfrifiadur.\n"
-"\n"
-"Bydd DrakX yn rhestri'r holl wasanaethau sydd ar gael gyda'r gosodiad "
-"cyfredol.\n"
-"Darllenwch y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob "
-"tro\n"
-"wrth gychwyn.\n"
-"\n"
-"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
-"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
-"rhagosodedig\n"
-"\n"
-"!!Byddwch yn ofalus iawn os ydych am ddefnyddio eich peiriant fel "
-"gwasanaethwr:\n"
-"mwy na thebyg na fyddwch eisiau cychwyn unrhyw wasanaethau nad oes eu\n"
-"hangen. Cofiwch fod cael nifer o wasanaethau wedi eu galluogi ar y "
-"gwasanaethwr,\n"
-"fod yn beryglus. Yn gyffredinol, dim ond dewis y gwasanaethau mae'n rhaid eu "
-"cael.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "ac un argraffydd anhysbys"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Argraffydd\": mae clicio ar y botwm\"Ffurfweddu\" yn agor dewin\n"
-"ffurfweddu argraffydd. Darllenwch y pennawd penodol yn y 'Starter Guide'\n"
-"am ragor o wybodaeth am sut i osod argraffydd newydd. Mae'r rhyngwyneb\n"
-"yn debyg i'r un welwyd wrth osod y system."
+msgid "Ireland"
+msgstr "Iwerddon"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "fersiwn cnewyllyn"
+
+#: ../../standalone/drakbackup:1
#, c-format
+msgid " Restore Configuration "
+msgstr " Adfer y Furfweddiad"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "A' hwn yw'r gosodiad cywir?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2740,4623 +2480,4388 @@ msgstr ""
"Rhyngrwyd am fanylion ffurfweddiad, neu aros nes i'ch system gael ei\n"
"osod a defnyddio'r rhaglen sydd yno i ffurfweddu eich cyswllt."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Os ydych wedi dweud wrth y gosodwr eich bod am ddewis pecynnau'n unigol\n"
-"bydd coeden yn cynnwys yr holl becynnau wedi eu dosbarthu yn 么l grwp ac\n"
-"isgrwp. Wrth bori'r goeden, gallwch ddewis grwp cyfan, isgrwp neu becyn\n"
-"unigol.\n"
-"\n"
-"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
-"ymddangos ar y dde. \n"
-"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
-"rhan\n"
-"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
-"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
-"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
-"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
-"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
-"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
-"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
-"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
-"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
-"\n"
-"Mae'r dewis \"Dibyniaethau Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
-"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
-"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
-"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
-"\n"
-"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniat谩u llwytho'r\n"
-"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
-"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal gr毛wyd ar\n"
-"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
-"greu disg meddal o'r fath."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
-"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
-"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
-"\n"
-"Mae pecynnau wedi eu trefnu i grwpiau yn dibynnu ar ddefnydd penodol\n"
-"eich peiriant. Mae gan Mandrake Linux bedair gosodiad rhagosodedig. Mae\n"
-"modd meddwl amdanynt fel blychau ar gyfer pecynnau amrywiol, fel mae modd\n"
-"i \"Fan Gwaith\" fod a rhaglenni o \"Datblygu\" wedi eu gosod.\n"
-"\n"
-"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
-"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
-"\n"
-" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
-"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
-"\n"
-" * \"Datblygu\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
-"dewiswch\n"
-" y grwpiau perthnasol\n"
-"\n"
-" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
-"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
-"eu cael ar eich peiriant.\n"
-"\n"
-" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
-"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
-"\n"
-"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
-"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
-"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
-"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
-"\n"
-" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
-"i weithio.\n"
-"\n"
-" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
-"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
-"ar gyfer gosod gwasanaethwr.\n"
-"\n"
-" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
-"llinell orchymyn weithredol. Tua 65MB o faint.\n"
-"\n"
-"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
-"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
-"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
-"\n"
-"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
-" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
-"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
-"eisoes.\n"
-"\n"
-" "
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mae gosodiad Mandrake Linux yn cynnwys nifer o CD-ROMau. Mae DrakX\n"
-"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
-"allan y CD cyfredol a gofyn am y llall."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled.\n"
-"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
-"ar gyfer y rhan fwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
-"ol eiaf\n"
-"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
-"fyddwch\n"
-"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
-"arall,\n"
-"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
-"un\n"
-"rhaniad Linux ar gael)\n"
-"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
-"\n"
-"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
-"\"rhif rhaniad\" (e.e, \"hda1\").\n"
-"\n"
-"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
-"\"sd\" os mai SCSI yw'r disg caled.\n"
-"\n"
-"Mae \"Rhif Disg Caled\" yn llythyren ar 么l \"hd\" neu \"sd\". Ar gyfer\n"
-"disg caled IDE mae:\n"
-"\n"
-" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
-"\n"
-" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
-"\n"
-"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
-"golygu\n"
-"\"ID SCSI ail isaf\", ag ati."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
-"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
-"blaen.\n"
-"Gallwch ddarllen yr \"Starter Guide\" i ddysgu mwy. Ond yn anhebyg i "
-"\"gwraidd\",\n"
-"sef y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n "
-"medru\n"
-"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
-"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
-"mewngofnodi\n"
-"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
-"fel\n"
-"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
-"eic\n"
-"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr fel defnyddiwr\n"
-"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
-"gyfan.\n"
-"\n"
-"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs - mae modd\n"
-"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
-"yn\n"
-"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
-"fewngofnodi i'r system. Mae modd ei newid. Yna rhowch gyfrinair. Nid yw\n"
-"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
-"diogelwch\n"
-"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
-"mewn\n"
-"perygl\n"
-"\n"
-"Os wnewch chi glicio \"Derbyn defnyddiwr\", bydd modd ychwanegu fanint\n"
-"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
-"neu eich chwaer, e.e. Ar 么l ychwanegu'r holl ddefnyddwyr, cliciwch \"Nesaf ->"
-"\".\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn caniat谩u i chi newid y \"cragen\" "
-"rhagosodedig\n"
-"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
-"芒 holl ddosbarthiad Mandrake Linux. Os ydych yn cytuno 芒'r holl amodau,\n"
-"cliciwch blwch \"Derbyn\". \n"
-"Os nad, ddiffoddwch eich cyfrifiadur."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Rhaid fformatio %s hefyd"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
-"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
-"cychwyn yn cydweddu gyda'r cyfrwng Gosod (cr毛wch ddisg cychwyn meddal newydd)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Digwyddodd gwall - ni chanfyddwyd dyfeisiau dilys i greu systemau ffeil "
-"arnynt. Gwiriwch eich caledwedd am ffynhonnell yr anhawster."
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gwall wrth ddarllen ffeil %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
-"``linux defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "Ffurfweddiad y Dewin"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
+msgid "Autoprobe"
+msgstr "Atoholi"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
+msgid "Backup system files..."
+msgstr "Ffeiliau system wrth gefn"
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Methu defnyddio darlledu heb barth NIS"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Bydd y pecynnau canlynol yn cael eu tynnu ganiat谩u diweddaru eich system: %"
-"s\n"
-"\n"
-"\n"
-"Ydych chi am dynnu'r pecynnau hyn?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Na"
+msgid "Removing printer \"%s\"..."
+msgstr "Tynnu argraffydd \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Iawn"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
-"\n"
+"Dangoswch lle mae'r ffeil auto_install.cfg wedi ei leoli,\n"
"\n"
-"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Does\n"
-"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r\n"
-"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
+"Gadael yn wag os ydych am greu modd gosod yn awtomatig.\n"
"\n"
-"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Ffurfweddu'r system"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Gosod y system"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Cau'r rhwydwaith"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Lefel gwybodaeth i'w gael drwy gyfarwyddid cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Cychwyn y rhwydwaith"
+msgid "Peru"
+msgstr "Periw"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Methodd rhannu: %s"
+msgid " on device: %s"
+msgstr "ar ddyfais: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
+msgid "Remove Windows(TM)"
+msgstr "Tynnu Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Methu canfod lle ar gyfer gosod"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"Yn cychwyn Gwasanaethwr Ffont X (mae hyn yn orfodol i XFree i redeg).."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Medrwch rannu %s\n"
-"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
+"Tynnwyd y rhanfwyaf o'r gwerthoedd\n"
+"hyn o'ch system ar waith.\n"
+"Medrwch eu newid yn 么l y galw."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Defnyddiwch fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Rhannu disg unigol"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Nid yw cron ar gael et ar gyfer di-wraidd"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Dileu'r ddisg gyfan"
+msgid "System"
+msgstr "System"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Tynnu Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Ydych chi eisiau defnyddio'r nodwedd?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Nid oes rhaniadau FAT i newid eu maint (neu nad oes digon o le ar 么l)"
+msgid "Arabic"
+msgstr "Arabeg"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"I siugrhau cywirdeb data'r rhaniad ar 么l ailfeintiol'r rhaniad(au),bydd \n"
-"gwiriadau'r system ffeiliau'n cael eu gwneud wrth i chi ail gychwyn Windows "
-"(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Methodd newid maint FAT: %s"
+"\n"
+"-Dewisiadau:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Mesur ffiniau system ffeilio Windows"
+msgid "Password required"
+msgstr "Mae angen cyfrinair"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Newid maint"
+msgid "%d minutes"
+msgstr "%d munud"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "rhaniad %s"
+msgid "Graphics card: %s"
+msgstr "Cerdyn graffeg: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Pa faint o le ydych am ei gadw ar gyfer Windows ar"
+msgid "WebDAV transfer failed!"
+msgstr "Method trosglwyddiad WebDaAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"RHYBUDD!\n"
-"\n"
-"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
-"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
-"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg\n"
-"scandisk yn Windows (ac os oes modd defrag), yna ail\n"
-"gychwyn y gosodiad. Dylech hefyd wneud copi wrth gefn\n"
-"o'ch data.Pan rydych yn siwr, cliciwch Iawn."
+msgid "XFree configuration"
+msgstr "Ffurfweddiad XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf o dan "
-"Windows ac yna ailgychwyn gosodi Mandrake Linux."
+msgid "Choose action"
+msgstr "Dewiswch weithred"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Cyfrifo maint rhaniad Windows"
+msgid "French Polynesia"
+msgstr "French Polynesia"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
-"digwyddodd y gwall canlynol: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Pa raniad ydych chi am newid ei faint?"
+"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm\n"
+"a bydd yn ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig\n"
+"p'un a'i yw'n lygoden PS/2, cyfresol neu USB.\n"
+"\n"
+" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
+"rhestr.\n"
+"\n"
+"Os byddwch yn dewis llygoden ar wah芒n i'r rhagosodedig, byddwch yn gweld\n"
+"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
+"fod\n"
+"y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch\n"
+"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto.\n"
+"\n"
+"Weithiau ni fydd llygod olwyn yn cael eu canfod yn awtomatig. Bydd rhaid i "
+"chi\n"
+"eu dewis o'r rhestr. Gwnewch yn siwr eich bod yn dewis yr un sy'n cyfateb "
+"i'r porth\n"
+"mae wedi ei gysylltu iddo. Wedi i chi wasgu'r botwm \"Nesaf ->\" bydd "
+"delwedd\n"
+"llygoden yn cael ei ddangos. Bydd angen i chi symud olwyn y llygoden iddo \n"
+"weithio'n gywir. Wrth i chi wedl yr olwyn sgroli ar y sgr卯n yn symud wrth i "
+"chi droi'r\n"
+"olwyn, profwch y botymau a gwirio fod cyfeirydd y llygoden yn symud ar y "
+"sgrin\n"
+"wrth i chi symud eich l;lygoden."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Defnyddiwch y lle gwag ar raniad Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Nid oes rhaniadau FAT i'w defnyddio fel cylch-么l (neu nad oes digon o le ar "
-"么l)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Cychwynnwch system sain ALSA (Pensaern茂aeth Sain Linux Uwch)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Maint rhaniad cyfnewid mewn MB: "
+msgid "Installing driver for %s card %s"
+msgstr "Gosod gyrrwr %s ar gyfer cerdyn %s "
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Maint rhaniad gwraidd mewn MB :"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
+"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
+"s ?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint"
+msgid "Enable Server"
+msgstr "Galluogi'r Gwasanaethwr"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
+msgid "Ukrainian"
+msgstr "Wcranaidd"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Defnyddiwch raniad Windows ar gyfer cylch-么l"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
+"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
+"argraffydd."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Defnyddiwch y rhaniadau cyfredol"
+msgid "Local network(s)"
+msgstr "Rhwydwaith(iau) lleol "
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Tynnu Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Defnyddiwch le gwag"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Mae eich %s wedi ei ffurfweddu.\n"
+"Medrwch ddefnyddio \"XSane\" i sganio dogfennau o'r ddewislen rhaglenni Aml-"
+"gyfrwng/Graffigau."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
+msgid "Firewire controllers"
+msgstr "Rheolyddion firewire"
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Nid oes gennych raniad cyfnewid\n"
+"Ar 么l ffurfweddu paramedrau cyffredinol y cychwynnwr, bydd y rhestr o\n"
+"ddewisiadau cychwyn ar gael wrth gyvchwyn yn cael eu harddangos.\n"
"\n"
-"Parhau beth bynnag?"
+"Os oes yna systemau gweithredu eraill ar eich cyfrifiadur byddant yn cael\n"
+"eu hychwanegu i'r ddewislen cychwyn. Mae modd addasu'r dewisiadau\n"
+"eraill dwy glicio \"Ychwanegu\" i greu cofnod newydd; dewis cofnod\n"
+"a chlicio \"Newid\" neu \"Tynnu\" i'w nweid neu ei dynnu. Mae \"Iawn\"\n"
+"yn gwirio'r newidiadau\n"
+"\n"
+"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb\n"
+"arall fydd yn mynd i'r consol ac yn ailgychwyn y cyfrifiadur. Gallwch "
+"ddileu'r\n"
+"cofnodion perthnasol o'r system weithredu i'w tynnu o ddewislwn y\n"
+"cychwynnwr,ond bydd rhaid i chi greu disg cychwyn ar gyfer y systemau\n"
+"gweithredu eraill rheini!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Rhaid bod gennych raniad gwraidd.\n"
-"Cr毛wch raniad (neu glicio ar un presennol)\n"
-"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
+msgid "System mode"
+msgstr "Modd system"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
-"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
+"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
+"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
+"芒'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
+"unrhyw enw defnyddiwr a chyfrinair perthnasol."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
-"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
-"\n"
-"\n"
-"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
-"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau 么l osod\n"
-"yr Official Mandrake Linux User's Guide."
+msgid "Netmask:"
+msgstr "Netmask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Atodi"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Pan mae'r dewis yma ar gael, gwneud yn siwr wrth gychwyn CUPS fod\n"
"\n"
-" Rhybudd\n"
-"\n"
-"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
-" ddarn, nid oes caniat芒d i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
-" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
+"- os yw LPD/LPRng wedi ei osod, na fydd CUPS yn ysgrifennu dros /etc/"
+"printcap\n"
"\n"
-"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
-" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
-" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
-" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
+"- os yw /etc/cups/cupsd.conf ar goll, bydd yn cael ei greu\n"
"\n"
-"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
-"wah芒n i\n"
-" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
-" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
-"terfynu eich hawl o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
-"chi,\n"
-"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
-"gyfer\n"
-" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol 芒\n"
-"dosbarthwr neu olygydd y cydrannau hynny.\n"
-"Mae trosglwyddo i drydydd parti neu gop茂o'r cydrannau hynny gan gynnwys y\n"
-" ddogfennaeth, wedi ei wahardd fel rheol\n"
+"- pan mae gwybodaeth am argraffydd yn cael ei ledaenu, nid yw'n cynnwys "
+"\"localhost\" fel enw gwasanaethwr.\n"
"\n"
-"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
-"perthnasol\n"
-" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
-"sy'n\n"
-" berthynol i raglenni meddalwedd.\n"
+"Os yw rhai o'r rhain yn achosi anhawster, diffoddwch y dewis hwn, ond bydd "
+"rhaid i chi ofalu amdanynt."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Cyflwyniad\n"
-"\n"
-"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
-"Mandrake Linux yn\n"
-"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
-"Meddalwedd yn\n"
-"cynnwys, ond heb eu cyfyngu, i'r casgliad o raglenni , dulliau, rheolau a "
-"dogfennau mewn\n"
-"perthynas 芒'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"1. Cytundeb Trwyddedu\n"
-"\n"
-"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
-"rhyngoch\n"
-"chi 芒 MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
-"\n"
-"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
-"rydych yn\n"
-"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
-"hon.\n"
-"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiat芒d i "
-"osod, dyblygu\n"
-"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
-"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
-"modd\n"
-"nad yw'n cyd-fynd 芒 thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
-"terfynu eich\n"
-"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
-"ddinistrio'n syth pob\n"
-"copi o'r Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"2. Gwarant Gyfyngedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
-"\"fel ag y maent\",\n"
-"heb ddim gwarant, hyd y mae'r gyfraith yn caniat谩u.\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
-"y bydd y gyfraith yn\n"
-"caniat谩u, am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
-"anuniongyrchol (gan\n"
-"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
-"ariannol, costau cyfreithiol,\n"
-"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
-"defnydd neu'r anallu i\n"
-"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
-"cynghori o'r posibilrwydd\n"
-"o'r fath iawn.\n"
-"\n"
-"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
-"FEDDALWEDD\n"
-" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
-"\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
-"bydd y gyfraith yn caniat谩u,\n"
-"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
-"neu anuniongyrchol (gan gynnwys\n"
-"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
-"costau cyfreithiol, a chosb o ganlyniad\n"
-"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
-"cydrannau meddalwedd o un o safleoedd\n"
-" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
-"gyfreithiau lleol. Mae'r\n"
-"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
-"cryptograffiaeth cryf sy'n cael\n"
-"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
-"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
-"bersonau a endidau gwahanol.\n"
-"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
-"amodau Trwydded Gyhoeddus\n"
-"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
-"ato o hyn ymlaen fel \"GPL\", neu\n"
-"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniat谩u i chi "
-"ddefnyddio, dyblygu, addasu neu\n"
-" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
-"trwydded pob cydran cyn\n"
-"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
-"gydran ac nid i MandrakeSoft.\n"
-"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
-"Drwydded GLP. Mae'r dogfennau\n"
-" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
-"benodol. Darllenwch y dogfennau\n"
-"am fwy o fanylion.\n"
+"OSS (Open Sound System) oedd yr API sain cyntaf. Mae'n API sail annibynnol o "
+"systemau gweithredu ( mae ar gael ar gyfer y rhan fwyaf o systemau unices) "
+"on mae'n API elfennol iawn a chyfyng.\n"
+"Mae gyrwyr OSS hefyd yn ail ddyfeisio'r hyn sy'n bod eisoes.\n"
"\n"
-"4. Hawliau Eiddo Deallusol\n"
+"Mae ALSA (Advanced Linux Sound Architecture) yn bensaerniaeth fodiwlaidd "
+"sy'n \n"
+"cynnal ystod eang o gardiau ISA, USB a PCI.\n"
"\n"
-"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
-"perthnasol ac wedi eu hamddiffyn\n"
-"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
-"meddalwedd. Mae MandrakeSoft yn cadw\n"
-"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
-"drwy unrhyw ddull ac ar gyfer\n"
-"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\" a'r logos cysylltiedig "
-"yn nodau masnachol sy'n\n"
-"perthyn i MandrakeSoft S.A.\n"
+"Mae hefyd yn darparu API llawer uwch na OSS.\n"
"\n"
-"5. Cyfreithiau Llywodraethol\n"
-"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
-"anghyfreithlon neu amherthnasol gan\n"
-"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
-"yn parhau i fod yn rhwymedig\n"
-"i adrannau cymwys o'r cytundeb.\n"
-"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
-"Ffrainc. Mae'n ddymunol y\n"
-"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
-"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
-"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch 芒 "
-"MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Cychwyn cam '%s\"\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Cymorth"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "heb ffurfweddu"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Ffurfweddu"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Mynd yn ein blaen beth bynnag?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Digwyddodd gwall wrth osod pecyn"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Roedd gwall wrth drefnu pecynnau"
+"I ddefnyddio alsa, mae modd defnyddio un ai:\n"
+"- hen api OSS cydweddus\n"
+"-api ALSA newydd sy'n darparu llawer o nodweddion gell ond sydd angen "
+"defnyddio llyfrgell ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Newidiwch eich CD-ROM\n"
+"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
+"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
+"disg caled!!\n"
+"(mae hyn ar gyfer gosod ar flwch arall).\n"
"\n"
-"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Gwrthod"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Derbyn"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Gosod pecynnau %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d pecyn"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Dim manylion"
+"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Manylion"
+msgid "Network printer \"%s\", port %s"
+msgstr "Argraffydd rhwydwaith \"%s\", porth %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Arhoswch, paratoi i osod"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu 芒'ch Rhwydwaith "
+"Lleol."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Amser yn weddill"
+msgid "OK to restore the other files."
+msgstr "Iawn i adfer ffeiliau eraill"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Amcangyfrif"
+msgid "Please choose your keyboard layout."
+msgstr "Dewiswch gynllun eich bysellfwrdd"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Gosod"
+msgid "Printer Device URI"
+msgstr "URI Dyfais Argraffu"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
+msgid "Not erasable media!"
+msgstr "Nid cyfrwng dileuadwy!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Gosodiad lleiaf"
+msgid "Terminal-based"
+msgstr "Seiliedig ar derfynnell"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Diweddaru'r dewis pecynnau"
+msgid "Installing a printing system in the %s security level"
+msgstr "Gosod system argraffu yn lefel diogelwch %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "LLwytho/Cadw ar ddisg meddal"
+msgid "The user name is too long"
+msgstr "Mae'r enw defnyddiwr yn rhy hir"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Cynt"
+msgid "Other OS (windows...)"
+msgstr "Systemau gweithredu Eraill (windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Gosodiad"
+msgid "WebDAV remote site already in sync!"
+msgstr "Mae safle pell WebDAV eisioes wedi cydamseru!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Dangoswch y pecynnau dewis awtomatig"
+msgid "Reading printer database..."
+msgstr "Darllen cronfa ddata argraffydd..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
+msgid "Generate auto install floppy"
+msgstr "Creu disg meddal awto gosod"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Rhaid i'r pecyn gael ei uwchraddio\n"
-"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
+"\t\t enw defnyddiwr:%s\n"
+"\t\t ar lwybr: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Mae'r pecynnau canlynol i'w gosod"
+msgid "No open source driver"
+msgstr "Dim gyrrwr cod agored"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gae毛dig ac "
+"mae nodweddion diogelwch ar eu huchaf."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Pwysigrwydd: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Maint: %d KB\n"
+msgid "New Caledonia"
+msgstr "New Caledonia"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Fersiwn: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocol Ewropeaidd (EDSSI)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Enw: %s\n"
+msgid "Video mode"
+msgstr "Modd fideo"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Pecyn gwallus"
+msgid "Please enter your email address below "
+msgstr "Rhowch eich cyfeiriad e-bost islaw"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Arall"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Cyfanswm maint: %d/%d MB"
+msgid "Network Monitoring"
+msgstr "Monitro'r Rhwydwaith"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Nesaf ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Dewis pecynnau unigol."
+msgid "New size in MB: "
+msgstr "Maint mewn MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Dewis y Grwp Pecyn"
+msgid "Partition table type: %s\n"
+msgstr "Tabl rhaniad math: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
-"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
-"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
-"'text'."
+msgid "Authentication Windows Domain"
+msgstr "Dilysu Parth Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Cadw'r dewis becynnau"
+msgid "US keyboard"
+msgstr "Bysellfwrdd UDA"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Awtomeiddwyd"
+msgid "Buttons emulation"
+msgstr "Efelychiad botymau"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Ail chwarae"
+msgid ", network printer \"%s\", port %s"
+msgstr ", rhwydwaith argraffu \"%s\", porth %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
-"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
-"disg caled!!\n"
-"(mae hyn ar gyfer gosod ar flwch arall).\n"
"\n"
-"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Ailgychwyn"
+"Gweithgaredd Drakbackup drwy d芒p:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Nid yw rhai camau wedi eu cwblhau.\n"
"\n"
-"Ydych chi wir eisiau gorffen?"
+" Anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth gefn "
+"drwy FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Creu disg meddal awto gosod"
+msgid "Sending Speed:"
+msgstr "Cyflymder Anfon:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Rhowch ddisg meddal yng ngyrrwr %s"
+msgid "Halt bug"
+msgstr "Gwall halt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
-" i alluogi'r cychwynnydd. Os nad ydych yn gweld anogwr y\n"
-" cychwynnydd wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
-" gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
-" Yna teipiwch: shut-down\n"
-"Wrth gychwyn eto dylech weld anogwr y cychwynnydd."
+msgid "Mail alert configuration"
+msgstr "Ffurfweddiad rhybudd e-bost"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Methodd gosod cychwynnydd. Digwyddodd y gwall canlynol:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Gosod cychwynnydd"
+msgid "Bosnian"
+msgstr "Bosnieg"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gwall gosod aboot, \n"
-"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
+msgid "Release: "
+msgstr "Ryddhad"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Ydych chi eisiau defnyddio aboot?"
+msgid "Connection speed"
+msgstr "Cyflymder y cysylltiad"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
-"neu Anhysbys ac ni fydd cychwynydd yaboot\n"
-"yn gweithio ar eich cyfer\n"
-"Bydd y gosodiad yn parhau ond bydd\n"
-"rhaid defnyddio BootX i gychwyn\n"
-"eich peiriant."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Paratoi cychwynnydd"
+"Rhowch enw dyfais eich Ysgrifennwr CD\n"
+"ex: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Cyfrinair Gweinyddol y Parth"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Enw Defnyddiwr Gweinyddiaeth Parth"
+msgid "Database Server"
+msgstr "Gwasanaethwr Cronfa Ddata"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Parth Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "nodweddion arbennig y gyrrwr (llosgi neu gynnal DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dilysu Parth Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"I hyn weithio gyda 2WK PDC, bydd angen i chi gael y gweinyddwr i redeg C:"
-"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add ac "
-"ailgychwyn y gwasanaethwr.Bydd angen hefyd yr enw defnyddiwr/cyfrinair "
-"Gweinyddiaeth Parth i uno'r peiriant 芒'r parth Windows(NM).\n"
-"Os nad yw'r rhwydwaith wedi ei alluogi eto, bydd DrakX yn ceisio ymuno 芒'r "
-"parth ar ol y cam o gychwyn y rhwydwaith.\n"
-"Os bydd y cam hwn yn methu am ryw reswm ac nid yw dilysiad yn gweithio, "
-"rhedwch 'smbpasswd -j DOMAIN -U USER%%PASSWORD' gan ddefnyddio eich Parth "
-"Windows(NM), a'ch Enw Defnyddiwr Gweinyddol/Cyfrinair ar 么l cychwyn eich "
-"system.\n"
-"Bydd y gorchymyn 'wbinfo -t' yn gwirio a yw eich cyfrinachau dilysu'n addas."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Gwasanaethwr NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Parth NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
+"gyda XFree %s.\n"
+"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
+"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
+"mewn 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "LDAP Server"
-msgstr "Gwasanaethwr LDAP"
+msgid "Please wait, setting security options..."
+msgstr "Arhoswch, gosod dewisiadau diogelwch..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "Sail dn LDAP"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Anhysbys|CPH05X (bt878) [nifer o werthwyr]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Dilysu LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Cychwyn yr amgylchedd graffigol wrth gychwyn eich system"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "hourly"
+msgstr "bob awr"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local files"
-msgstr "Ffeiliau lleol"
+msgid " Successfuly Restored on %s "
+msgstr " Ei adfer yn Llwyddiannus ar %s "
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Dilysu"
+msgid "Making printer port available for CUPS..."
+msgstr "Gwneud porth argraffu ar gael ar gyfer CUPS..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
+msgid "Antigua and Barbuda"
+msgstr "Antigua a Barbuda"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No password"
-msgstr "Dim cyfrinair"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"Mae !!! yn dangos bod y cyfrinair yng nghronfa ddata'r system yn\n"
+"wahanol i'r un yng ngronfa ddata'r Gwasanaethwr Terfynell.\n"
+"I fewngofnodi i'r Gwas.Terfynell dileu/ail ychwnaegu'r defnyddiwr."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Gosod cyfrinair gwraidd"
+msgid "Spanish"
+msgstr "Spaenaidd"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Nid ydych wedi ffurfweddu X. Ydych chi'n siwr eich bod am wneud hyn?"
+msgid "Start"
+msgstr "Cychwyn"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi gwiriad cymysgaredd cardiau ethernet."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Gwasanaethau"
+msgid "Configuring applications..."
+msgstr "Ffurfweddi'u rhaglenni"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "System"
+msgid "Normal modem connection"
+msgstr "Cysylltiad modem arferol"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s ar %s"
+msgid "File Selection"
+msgstr "Dewis ffeiliau"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Cychwynydd ar waith"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Pa ffurfweddiad IDSN sy'n well gennych?\n"
+"\n"
+"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
+" cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
+"yw'n safonol. \n"
+"\n"
+" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
+" ond mae ganddo llai o offer.\n"
+"\n"
+"Rydym yn argymell y ffurfweddiad ysgafn.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Cychwyn"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "anablwyd"
+msgid "Run config tool"
+msgstr "Rhedeg offeryn ffurfweddu"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "gweithredu"
+msgid "Bootloader installation"
+msgstr "Gosodiad Bootloader"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Mur Cadarn"
+msgid "Root partition size in MB: "
+msgstr "Maint rhaniad gwraidd mewn MB :"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Diogelwch"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Lefel Diogelwch"
+msgid "Etherboot ISO image is %s"
+msgstr "%s yw'r delwedd ISO etherboot"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Rhwydwaith"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
+"gydrannu enwau gwestai i'r cyfeiriadau IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Rhwydwaith a'r Rhyngrwyd"
+msgid "Disconnect..."
+msgstr "Dadgysylltu..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Rhyngwyneb graffigol"
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Caledwedd"
+msgid "Report"
+msgstr "Adroddiad"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "Cerdyn Teledu"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
+msgid "level"
+msgstr "lefel"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Bydd pob digwyddiad yn cael ei archwilio gan arbenigwr technegol "
+"MandrakeSoft cymwysedig"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "A oes gennych gerdyn sain ISA?"
+msgid "Package Group Selection"
+msgstr "Dewis y Grwp Pecyn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Cerdyn sain"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Adfer drwy Protocol Rhwydwaith: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Gwasanaethwr CUPS pell"
+msgid "You can configure each parameter of the module here."
+msgstr "Mae modd i chi ffurfweddu pob paramedr o'r modiwl yma"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Nid oes argraffydd"
+msgid "Choose the resolution and the color depth"
+msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Argraffydd"
+msgid "Emulate third button?"
+msgstr "Efelychu'r trydydd botwm?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Llygoden"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Nid oes modd i chi greu rhaniad newydd\n"
+"(gan eich bod wedi cyrraedd y nifer uchaf o raniadau cynradd).\n"
+"Diddymwch raniad cynradd a chreu rhaniad estynedig."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Cylchfa amser"
+msgid "Mount"
+msgstr "Gosod"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Bysellfwrdd"
+msgid "Creating auto install floppy"
+msgstr "Creu disg meddal awto gosod"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Crynodeb"
+msgid "Install updates"
+msgstr "Diweddariadau"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "Gweinydd NTP"
+msgid "text box height"
+msgstr "uchder blwch testun"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
+msgid "State"
+msgstr "Stad"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Cloc caledwedd wedi ei osod i GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Gwnewch yn siwr fod y deunydd ar gael ar gyfer y ddyfais %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Pa un yw eich parth amser?"
+msgid "Enable multiple profiles"
+msgstr "Galluogi aml-broffil"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Hoffech chi geisio eto?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
+"cyfeiriadur /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Methu canfod drych: %s."
+msgid "Local printer"
+msgstr "Argraffydd lleol"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Cysylltu 芒'r drych i estyn y rhestr o becynnau sydd ar gael"
+msgid "Files Restored..."
+msgstr "Adferwyd ffeiliau..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
+msgid "Package selection"
+msgstr "Dewis pecynnau"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Cysylltu 芒 safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
+msgid "Mauritania"
+msgstr "Mauritania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu\n"
-"ryddhau ers i'r dosbarthiad fod ar gael.Efallai bod bod gwallau amaterion "
-"diogelwch wedi eu cywiro\n"
+"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
+"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
+"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
+"fyddaf yn ei newid na chyffwrdd 芒 ffurfweddiad eich gwasanaethwr DHCP.\n"
"\n"
-"I lwytho'r pecynnau i lawr, bydd angen cyswllt gweithredol\n"
-"芒'r Rhyngrwyd.\n"
+"Y cofnod DNS rhagosodedig yw'r enw gwasanaethwr storio sydd wedi ei "
+"ffurfweddu yn y mur cadarn. Mae modd i chi ei newid am eich IP DNS ISP, e."
+"e. \n"
"\n"
-"Ydych chi am osod y diweddariadau?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
+"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
+"DHCP ar eich cyfer.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
+"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
+"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0, "
+"ail argraffydd USB: /dev/usb/lp1,...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Ffurfweddiad 么l osod"
+msgid "All primary partitions are used"
+msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Gosod pecyn %s\n"
-"%d%%"
+"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
+"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
+"."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Paratoi'r gosodiad"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom wedi ei labelu \"%s\""
+msgid "Installation Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr Gosod"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
-"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
-"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
+msgid "Configuring IDE"
+msgstr "Ffurfweddu IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Popeth"
+msgid "Network functionality not configured"
+msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
+msgid "Configure module"
+msgstr "Modd ffurfweddu"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Gyda dogfennaethelfennol (argymhellir!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Cocos (Keeling) Islands"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Gyda X"
+msgid "Disconnecting from the Internet "
+msgstr "Datgysylltu o'r Rhyngrwyd"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
-"Dewiswch y gosodiad lleiaf rydych ei eisiau"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Mi fydd angen i chi aillgychwyn cyn i'r newidiadau ddod i rym"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Math o osodiad"
+msgid "Provider phone number"
+msgstr "Rhif ff么n y darparwr"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
+msgid "Host %s"
+msgstr "Gwesteiwr %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
+msgid "Armenia"
+msgstr "Armenia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Llwytho o ddisg meddal"
+msgid "Fiji"
+msgstr "Ffiji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Dewis pecynnau"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Gosod lleiafswm hyd cyfrinair a lleiafswm digidau a lleiafswm llythrennau "
+"mawr."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Cadw ar ddisg meddal"
+msgid "Second floppy drive"
+msgstr "Ail ddisg meddal"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Llwytho o o ddisg meddal"
+msgid "About Harddrake"
+msgstr "Ynghylch Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
-"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
+msgid "Drive capacity"
+msgstr "Maint y gyrrwr"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Nid oes gan eich system ddigon o le ar 么l ar gyfer gosodiad neu uwchraddiad "
-"(%d> %d)"
+"Rhowch ddisg meddal yn y gyrrwr\n"
+"Mi fydd yr holl wybodaeth ar y disg meddal yma yn cael ei golli"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Chwilio am y pecynnau sydd ar gael"
+msgid "Size: %s"
+msgstr "Maint: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Canfod pecynnau i'w uwchraddio"
+msgid "Control and Shift keys simultaneously"
+msgstr "Bysellau Control a Shift gyda'i gilydd"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Edrych arbecynnau wedieu gosod yn barod"
+msgid "secondary"
+msgstr "eilradd"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Chwilio am y pecynnau sydd ar gael ac yn ailadeiladu cronfa ddata rpm..."
+msgid "View Backup Configuration."
+msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
+msgid "if set to yes, report check result to syslog."
+msgstr "os wedi ei osod i iawn, adrodd y gwirio i syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Wedi methu gwirio system ffeiliau %s. Hoffech chi drwsio'r gwallau? (gofal, "
-"mae modd colli data)"
+msgid "No password"
+msgstr "Dim cyfrinair"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Gwirio blociau gwallus?"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
+msgid "There is no existing partition to use"
+msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
+"Mae argraffyddion canlynol\n"
+"\n"
+"%s\n"
+"ar gael ar eich system.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
-"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
-"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Dewiswch y pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
+"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr "
+"neu IP'r argraffydd ac yn ddewisol rhif y porth (Y rhagosodedig yw 9100). Ar "
+"wasanaethwyr HP JetDirect rhif y porth, fel rheol, yw 9100, gall amrywio ar "
+"wasanaethwyr eraill. Gweler llawlyfr eich caledwedd"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "dim rhaniadau ar gael"
+msgid "Hard drive information"
+msgstr "Gwybodaeth am y ddisg caled"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Ffurfweddu IDE"
+msgid "Russian"
+msgstr "Rwsiaidd"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Yr Iorddonen"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Ffurfweddu cardiau PCMCIA..."
+msgid "Hide files"
+msgstr "Cuddio ffeiliau"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Awto ganfod argraffyddion sy'n gysylltiedig a'r peiriant hwn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Efelychiad Botwm 3"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"Nid yw XawTV wedi ei osod!\n"
+"\n"
+"\n"
+"Os oes gennych gerdyn teledu ond nid yw DrakX wedi ei ganfod (dim modiwl "
+"bttv ar saa7134\n"
+"yn \"/etc/modules\") na xawtv wedi ei osod, anfonwch canlyniad\n"
+"\"lspcidrake -v -f\" i \"install\\@mandrakesoft.com\"\n"
+"gyda phwnc \"undetected TV card\".\n"
+"\n"
+"\n"
+"Mae modd ei osod wrth deipio \"urpmi xawtv\" fel gwraidd mewn consol."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Efelychiad Botwm 2"
+msgid "Sorry, no floppy drive available"
+msgstr "Nid oes gyrrwr disg meddal ar gael"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Efelychiad botymau"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich llygoden wedi cysylltu iddi"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
+"IPP a gosod argraffu o'r peiriant hwn gyda'r \"%s\" yn Printerdrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Porth Llygoden"
+msgid "Bad package"
+msgstr "Pecyn gwallus"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Dewiswch math eich llygoden"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
+"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
+"gwasanaethwr ffeil ac argraffu..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Allwedd amgryptio ar gyfer %s"
+msgid "DrakSec Basic Options"
+msgstr "Dewisiadau Sylfaenol DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Diweddaru %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Nodyn: os oes gennych gerdyn sain ISA PnP, bydd rhaid i chi ddefnyddio "
+"rhaglen sndconfig. Teipiwch \"sndconfig\" mewn consol."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Gosod neu ddiweddaru?"
+msgid "Romania"
+msgstr "Rwmania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Gosod/Diweddaru"
+msgid "choose device"
+msgstr "dewis dyfais"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Dyma restr lawn o'r bysellfyrddau ar gael"
+msgid "Canada"
+msgstr "Canada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Dewiswch gynllun eich bysellfwrdd"
+msgid "Remove from LVM"
+msgstr "Tynnu o LVM"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Gadael"
+msgid "Timezone"
+msgstr "Cylchfa amser"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Cytundeb trwyddedu"
+msgid "German"
+msgstr "Almaeneg"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Digwyddodd gwall"
+msgid "Next ->"
+msgstr "Nesaf ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> rhwng elfennau | <Space> yn dewis | <F12> y sgr卯nnesaf "
+"Drwy gychwyn hwn bydd yn caniatau argraffu testun plaenyn yr iaeth "
+"Siapanaeeg. Defnyddiwch hwn os ydych wir angen argraffu testun yn "
+"Siapanaeeg, oherwydd os ydych yn ei dderfnyddio ni fydd modd argraffu nodau "
+"acennog mewn ffontiau lladin ragor ac ni fydd modd newid ymyl tudalen na "
+"maint ffontiau, ag ati. Mae hyn yn effeithio ar argraffyddion sydd wedi eu "
+"diffinio ar y cyfrifiadur hwn. Os ydych am argraffu testun siapanaeeg ar "
+"argraffydd sy'n gysylltiedig 芒 chyfrifiadur pell, bydd angen cychwyn y "
+"nodwedd ar y cyfrifiadur hwnnw."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Gosodiad %s Mandraks Linux"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Mwy na thebyd rhaniad Gyrrwr\n"
+"yw'r rhaniad hwn. Gwell gadael\n"
+"llonnydd iddo.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Does dim gyrrwr disg meddal ar gael"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Croeso i %s"
+msgid "Horizontal refresh rate"
+msgstr "Graddfa adfywio llorweddol"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
-"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
-"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pwynt gosod dyblyg %s"
+"Methu dadsetio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
+"gyfer cylch-么l\n"
+"Tynnu'r cylch-么l yn gyntaf"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
-"Mae'n beryglus i barhau."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Arhoswch"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Iawn"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Gorffen"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "Elfennol"
+"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
+"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar 么l cychwyn eich "
+"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
+"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
+"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
+"\"Argraffydd\""
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Uwch"
+msgid "USB controllers"
+msgstr "Rheolyddion USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Tynnu"
+msgid "What norm is your TV using?"
+msgstr "Pa norm mae eich teledu'n ei ddefnyddio?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Newid"
+msgid "Type:"
+msgstr "Math: "
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Ychwanegu"
+msgid "Share name"
+msgstr "Rhannu enw"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Dewis ffeil"
+msgid "enable"
+msgstr "galluogi"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Yma medrwch ddewis yr bysell neu gyfuniad o fysellau fydd yn\n"
-"caniat谩u newid rhwng bysellfyrddau gwahanol (e.e.: lladin neu\n"
-"arall)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Bysell \"Windows\" de"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Bysell \"Windows\" chwith"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Bysell \"Dewislen\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Bysellau Alt a Shift gyda'i gilydd"
+"Cysylltu 芒 safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "Bysell CapsLock"
+msgid "Remove the loopback file?"
+msgstr "Tynnu'r ffeil cylch-么l?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Bysellau Control a Shift gyda'i gilydd"
+msgid "Selected size is larger than available space"
+msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Y ddwy fysell Shift gyda'i gilydd"
+msgid "NCP server name missing!"
+msgstr "Mae enw gwasanaethwr NCP ar goll!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Bysell Alt dde"
+msgid "Please choose your country."
+msgstr "Dewiswch eich gwlad."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Iwgoslafaidd (lladin)"
+msgid "Hard Disk Backup files..."
+msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Fietnam毛aidd \"rhes rhifol\" QWERTY"
+msgid "Laotian"
+msgstr "Latfieg"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Bysellfwrdd UDA (rhyngwladol)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Bysellfwrdd UDA"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Mae'r protocol rstat yn caniat谩u i ddefnyddwyr rhwydwaith \n"
+"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Bysellfwrdd DG"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Ailgynhyrchu rhestr o sganwyr wedi eu ffurfweddu..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Wcranaidd"
+msgid "Scanner"
+msgstr "Sganiwr"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Twrcaidd (model modern \"Q\")"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Rhybudd: gall profi'r cerdyn graffeg hwn rewi eich cyfrifiadur"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Twrcaidd (model traddodiadol \"F\")"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Bysellfwrdd Tajig"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Bysellfwrdd Thai"
+msgid "Welcome To Crackers"
+msgstr "Croeso i Crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (cynllun teipiadur)"
+msgid "Module options:"
+msgstr "Dewisiadau modiwl:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (cynllun TSCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Gwnewch eich rhwydwaith yn ddiogel gyda'r Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbaidd (cyrilig)"
+msgid "Go on without configuring the network"
+msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacaidd (QWERTY)"
+msgid "Abort"
+msgstr "Peidio"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slofacaidd (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Dim cais am gyfrinair ar %s ym mhorth %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slfenaidd"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"Gwiriwch os ydych am ddefnyddio'r dyfais nad yw'n mynd n么l i'e ddechrau."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Swedaidd"
+msgid "Usage of remote scanners"
+msgstr "Defnyddiwch o sganwyr pell"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rwsiaidd (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rwsiaidd"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf o dan "
+"Windows ac yna ailgychwyn gosodi Mandrake Linux."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romanaidd (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norwyaidd)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romanaidd (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Cynnydd Disg Caled wrth Gefn..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canada (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "Methu fforchio: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portiwgalaidd"
+msgid "Type: "
+msgstr "Math: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
+msgid "<-- Edit Client"
+msgstr "<-- Golygu Cleient"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
+msgid "no fonts found"
+msgstr "heb ganfod ffontiau"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norwyaidd"
+msgid "Mouse"
+msgstr "Llygoden"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Isalmaenaidd"
+msgid "not enough room in /boot"
+msgstr "dim digon o le yn /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malteg (UDA)"
+msgid "Choosing an arbitratry driver"
+msgstr "Dewis gyrrwr ar hap"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malteg (DU)"
+msgid "Host name"
+msgstr "Enw gwesteiwr"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongoleg (cyrillic)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burma)"
+msgid "the color of the progress bar"
+msgstr "lliw'r bar cynnydd"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedonaidd"
+msgid "Suppress Fonts Files"
+msgstr "Llethu ffeiliau Ffontiau"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Ychwanegu i RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latfiaidd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
+"gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
+"\n"
+"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r\n"
+"rhaniad root yn unig\n"
+"\n"
+"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
+"\n"
+" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis ydewis "
+"cychwyn.\n"
+"\n"
+" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
+"amrywiad ohono gydag estyniad\n"
+"\n"
+" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
+"\n"
+" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
+"ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i\n"
+"alluogi efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r "
+"trydydd\n"
+"botwm llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
+"cychwynnol,\n"
+" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
+" cychwyn argyfwng.\n"
+"\n"
+" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
+"angen\n"
+"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
+"\n"
+" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
+"yn unig, i\n"
+" ganiat谩u gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
+"modd\n"
+" diystyru'r dewis hwn.\n"
+"\n"
+" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anawsterau "
+"sylweddol,\n"
+" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
+" ffr芒m byffer cynhenid\n"
+"\n"
+" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
+" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
+"chi\n"
+" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuenaidd \"ffonetig\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
+"OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Does dim gyrrwr disg meddal ar gael!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuenaidd AZERTY (newydd)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"I wybod am y dewisiadau sydd ar gael ar gyfer yr argraffydd, darllenwch un "
+"ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr dewis argraffu\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuenaidd AZERTY (hen)"
+msgid "Continue anyway?"
+msgstr "Parhau beth bynnag?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Latfieg"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
+"eich argraffydd) neu un tebyg."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Lladin America"
+msgid "Printer"
+msgstr "Argraffydd"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Bysellfwrdd Coreaidd"
+msgid "Saudi Arabia"
+msgstr "Saudi Arabia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Siapa毛aidd 106 bysell"
+msgid "Internet"
+msgstr "Rhyngrwyd"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Cafodd rhai dyfeisiau eu hychwanegu:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Eidalaidd"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Eislandaidd"
+msgid "Printing on the printer \"%s\""
+msgstr "Argraffu ar argraffydd \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iranaidd"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"Mae /etc/hosts.allow and /etc/hosts.deny wedi eu ffurfweddu - dim newid"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelaidd (Ffonetig)"
+msgid "Restore From Tape"
+msgstr "Adfer o D芒p"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israelaidd"
+msgid "Choose the profile to configure"
+msgstr "Dewiswch broffil i'w ffurfweddu"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croataidd"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Rhowch enw gwesteiwr Zeroconf heb ddot os nad ydych\n"
+"am ddefnyddio'r enw gwesteiwr rhagosodedig."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Hwngaraidd"
+msgid "Backup Now from configuration file"
+msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Dylai enw'r pwyntiau gosod gynnwys llythrennau a rhifau'n unig"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Ailgychwyn system argraffu..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Groegaidd"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Ymresymiadau: (name)\n"
+"\n"
+"Ychwanegu'r enw fel eithriad i drin cyfrinair yn erbyn msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
+msgid "See hardware info"
+msgstr "Gweler gwybodaeth am galedwedd"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
+msgid "First sector of boot partition"
+msgstr "Adran gyntaf o'r rhaniad cychwyn"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Ffrengig"
+msgid "Printer manufacturer, model"
+msgstr "Gwneuthurwr yr argraffydd, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Ffinaidd"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spaenaidd"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[DEWISIADAU]...\n"
+"Ffurfweddwr Gwasanaethwr Terfynell Mandrake\n"
+"--enable : galluogi MTS\n"
+"--disable : analluogi MTS\n"
+"--start : cychwyn MTS\n"
+"--stop : atal MTS\n"
+"--adduser : ychwanegu defnyddiwr system presennol i MTS (angen enw "
+"defnyddiwr)\n"
+"--deluser : dileu defnyddiwr system presennol o MTS (angen enw "
+"defnyddiwr)\n"
+"--addclient : ychwanegu peiriant cleient i MTS (angen cyfeiriad MAC, "
+"IP, enw delwedd nbi)\n"
+"--delclient : dileu peiriant cleient i MTS (angen cyfeiriad MAC, IP, "
+"enw delwedd nbi)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonaidd"
+msgid "Subnet Mask:"
+msgstr "Masg Isnet"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedaidd)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Them芒u LiLo a Croeso Cychwyn wedi eu gosod yn llwyddiannus"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwyaidd)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Y ddau baramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
+"holl sgr卯n yn cael ei adnewyddu, ac yn fwyaf pwysig y raddfa cydamseru\n"
+"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
+"\n"
+"Mae'n BWYSIG IAWN nad ydych yn enwi monitor gyda graddfa cydamseru\n"
+"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
+"hynny.\n"
+"Os oes gennych amheuaeth, dewiswch raddfa is."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (UDA)"
+msgid "Modify"
+msgstr "Newid"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danaidd"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniat谩u newid y gosodiadau dewis "
+"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
+"llinell gorchymyn, e.e \"%s <file>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Angen enw gwesteiwr, enw defnyddiwr a chyfrinair"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Almaenaidd (dim bysellau marw)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"Protocol yw WebDAV sy'n eich caniat谩u i chi osod gwasanaethwr gwe'n lleol\n"
+"a'i drin fel system ffeilio lleol ( ar yr amod bod y gwasanaethwr lleol wedi "
+"ei\n"
+"ffurfweddi fel gwasanaethwr WebDAV). Os hoffech ychwanegu pwyntiau\n"
+"gosod WebDAV, dewiswch \"Newydd\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Almaeneg"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tsiec (QWERTY)"
+msgid "new"
+msgstr "newydd"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tsiec (QWERTY)"
+msgid "Would you like to try again?"
+msgstr "Hoffech chi geisio eto?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Swisaidd (gosodiad Ffrengig)"
+msgid "Wizard"
+msgstr "Dewin"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Swisaidd (gosodiad Almaenig)"
+msgid "Edit selected server"
+msgstr "Golygu'r gwesteiwr"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarusaidd"
+msgid "Please choose where you want to backup"
+msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnieg"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilaidd (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Peidio cynnwys storfa'r porwr"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bwlgaraidd (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Dewiswch gynllun allweddell"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bwlgaraidd (ffonetig)"
+msgid "Standard"
+msgstr "Safonol"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengali"
+msgid "Please choose your mouse type."
+msgstr "Dewiswch math eich llygoden"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgaidd"
+msgid "Connect..."
+msgstr "Cysylltu..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan (lladin)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Methu ffurfweddu argraffydd \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabeg"
+msgid "not configured"
+msgstr "heb ffurfweddu"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenaidd (ffonetig)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenaidd (teipiadur)"
+msgid "About"
+msgstr "Ynghylch"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenaidd (hen)"
+msgid "Proxies configuration"
+msgstr "Ffurfweddiad dirprwyon"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albaniaidd"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Pwylaidd"
+msgid "Start: sector %s\n"
+msgstr "Dechrau: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Maethu cael mynediad i'r disg meddal!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "cysylltwyd 芒 dewin Bugzilla..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "De Affrica"
+msgid "Mail Server"
+msgstr "Gwasanaethwr E-bost"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbia"
+msgid "Please click on a partition"
+msgstr "Cliciwch ar raniad"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "Diwrnod da i chi!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "ar draws Rhwydwaith"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis a Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Diweddaru %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Fietnam"
+msgid "Select Printer Connection"
+msgstr "Dewiswch Gysylltiad Argraffydd"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Islands (U.S.)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Wrthi'n sganio am sianeli Teledu ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Islands (British)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Gwall wrth anfon ffeil drwy FTP.\n"
+" Cywirwch eich ffurfweddiad FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "Cychwyn Amrediad IP:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent and the Grenadines"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
+"o wasanaethau rhyngrwyd eraill, yn 么l y galw. Mae'n gyfrifol am gychwyn\n"
+"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
+"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatican"
+msgid "the height of the progress bar"
+msgstr "uchder y bar cynnydd"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Cadw drwy %s ar westeiwr: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Yr Ariannin"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"Ganiat谩u/Gwrthod darlledu icmp atsain."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Gwasanaethwr Enw Parth"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Wcrain"
+msgid "Security Level:"
+msgstr "Lefel diogelwch:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "Mount points must begin with a leading /"
+msgstr "Rhaid i bwyntiau gosod gynnwys / arweiniol"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "Gwasanaethwr E-bost Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Gorffen heb gadw"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad a Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Twrci"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Mae'r cynnyrch ar gael ar safle gwe MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Rhowch y maint mwyaf\n"
+"i'w ganiat谩u ar gyfer Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisia"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Mae yna lawer i ddewis o (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Hard drive detection"
+msgstr "Canfod disg caled"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Dwyrain Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
+"Dewiswch y gosodiad lleiaf rydych ei eisiau"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Rhowch URL gwasanaethwr WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tajikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Gwlad Thail"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Chad"
+msgid "Accept"
+msgstr "Derbyn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks and Caicos Islands"
+msgid "Description"
+msgstr "Disgrifiad"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Error opening %s for writing: %s"
+msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syria"
+msgid "Mouse type: %s\n"
+msgstr "Math o lygoden: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome a Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Dewiswch maint eich gofod CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Suriname"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+" Galluogu su o aelodau grwp olwyn yn unig neu ganiat谩u su o unrhyw "
+"ddefnyddiwr."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Expert Area"
+msgstr "Maes Uwch"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Dewiswch fonitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Nid yw label gwag yn cael ei ganiat谩u"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Malteg (DU)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slofacia"
+msgid "I can't add any more partition"
+msgstr "Does dim modd ychwanegu raniadau ychwanegol"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen Islands"
+msgid "Size in MB: "
+msgstr "Maint mewn MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenia"
+msgid "Remote printer"
+msgstr "Argraffydd pell"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Please choose a language to use."
+msgstr "Dewiswch iaith i'w defnyddio."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapore"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu 芒'r "
+"Rhyngrwyd.\n"
+"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
+"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Swdan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Mewngofnodi'n awtomatig ar gyfer un defnyddiwr."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Floppy format"
+msgstr "Fformatio disg meddal"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Islands"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabia"
+msgid "Generic Printers"
+msgstr "Argraffyddion Generig"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Dewiswch yr argraffydd i drin y gwaith argraffu neu rhowch enw dyfais/ffeil "
+"ar y ninell mewnbwn"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rwsia"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Mae' sganwyr y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rwmania"
+msgid "First sector of the root partition"
+msgstr "Adran gyntaf o'r rhaniad gwraidd"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Alternative drivers"
+msgstr "Gyrrwyr eraill"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Gwiriwch pob dewis sydd angen arnoch.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cape Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portiwgal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "A oes gan y cpu y Cyrix 6x86 Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestinia"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Roedd rhai Pentium cynnar yn wallus ac yn rhewi wrth ddadgodio F00F bytecode"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neu rhowch enw "
+"dyfais/ffeil ar y llinell mewnbwn"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre a Miquelon"
+msgid "/Options/Test"
+msgstr "/Dewisiadau/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Gwlad Pwyl"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Rhaid defnyddio'r lefel hwn gyda gofal. Mae'n gwneud eich system yn haws ei\n"
+"ddefnyddio ond mae'n sensitif iawn: rhaid peidio defnyddio'r peiriant i'w\n"
+"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pacistan"
+msgid "Mounting partition %s"
+msgstr "Yn fformatio rhaniad %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Philippines"
+msgid "User name"
+msgstr "Enw defnyddiwr"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua New Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Ffurfweddiad newydd (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "French Polynesia"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Periw"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "System cadw wrth gefn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Tudalennau prawf"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Seland Newydd"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Rhestr o ddata i'w adfer:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Gwirio %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "Dewisiadau Argraffydd TCP/Soced"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Cof Cerdyn (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Ffrainc"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "pori"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Island"
+msgid "Checking installed software..."
+msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Mae enw'r argraffydd pell ar goll!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "New Caledonia"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Ydych chi am alluogi argraffu ar argraffydd mewn rhwydwaith leol?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Turkey"
+msgstr "Twrci"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
+msgid "Alcatel speedtouch usb"
+msgstr "usb Alcatel Speedtouch"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid "Number of buttons"
+msgstr "Nifer o fotymau"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mecsico"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Fietnam毛aidd \"rhes rhifol\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Modiwl"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldives"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
+"\"foomatic-configure\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Caledwedd"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "Yr Unol Daleithiau"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "Default OS?"
+msgstr "System Weithredu Rhagosodedig?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "Swisaidd (gosodiad Almaenig)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Northern Mariana Islands"
+msgid "Configure all heads independently"
+msgstr "Ffurfweddu pob pen yn annibynnol"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Dewiswch yr argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn "
+"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
+"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
+"\"Ffurfweddiad gyda Llaw\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "Gweinydd NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "LLwytho/Cadw ar ddisg meddal"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedonia"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Does gan y thema ddim croeso cychwyn yn %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Islands"
+msgid "nice"
+msgstr "hyfryd"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Leaving in %d seconds"
+msgstr "Gadael mewn %d eiliad"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Country"
+msgstr "Gwlad"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Morocco"
+msgid "Property"
+msgstr "Eiddo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libya"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Latfia"
+msgid "LAN Configuration"
+msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxembourg"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Lithuania"
+msgid "Path or Module required"
+msgstr "Llwybr neu Fodiwl angenrheidiol"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Dewisiadau Uwch"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Coma bug"
+msgstr "Coma bug"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
+"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
+"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
+"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
+"ddisg caled gael eu diffinio.\n"
+"\n"
+"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
+"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
+"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
+"\n"
+"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
+"\n"
+" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
+"\n"
+" *\"Awto ddynodi\": mae'r dewis hwn yn caniat谩u i chi greu'n awtomatig\n"
+"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
+"\n"
+" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
+"\n"
+" *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
+"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
+"\n"
+" \"Adfer y tabl rhaniad\": mae hyn yn caniat谩u adfer tabl rhaniad "
+"blaenorol\n"
+"o ddisg meddal.\n"
+"\n"
+" \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
+"modd\n"
+"ceisio ei adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
+"fethu.\n"
+"\n"
+" \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
+"lwytho'r\n"
+"tabl rhaniad gwreiddiol.\n"
+"\n"
+" *\"Awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
+"osod\n"
+"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
+"\n"
+" *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
+"rannu\n"
+"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
+"rhannu\n"
+"\n"
+" *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
+"\n"
+" *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniat谩u "
+"gweithredoedd\n"
+"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
+" wybodaeth.\n"
+"\n"
+" *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
+" eich newidiadau yn 么l i'r ddisg\n"
+"\n"
+"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
+" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
+"\n"
+"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
+"\n"
+" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
+"\n"
+" *Ctrl-d i ddileu rhaniad;\n"
+"\n"
+" *Ctrl-m i greu pwynt gosod;\n"
+"\n"
+"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
+"y\n"
+" pennawd ar ext2fs yn y ``Reference Manual''.\n"
+"\n"
+"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
+" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
+"yaboot.\n"
+"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
+"gall fod yn le defnyddiol i gadw cnewyllyn sb芒r a delweddau ramdisk ar "
+"gyfer\n"
+" sefyllfaoedd cychwyn argyfyngus!"
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Cerdyn Greaffig\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich cerdyn o'r rhestr.\n"
+"\n"
+" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
+"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
+"ar eich cyfer."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "There was an error installing packages:"
+msgstr "Digwyddodd gwall wrth osod pecyn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Lubanus"
+msgid "Lexmark inkjet configuration"
+msgstr "Ffurfweddiad inkjet Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Dadwneud"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Save partition table"
+msgstr "Cadw'r tabl rhaniad"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman Islands"
+msgid "Finnish"
+msgstr "Ffinaidd"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Macedonia"
+msgstr "Macedonia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Corea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Mae'r rhannu yn 么l defnyddiwr yn defnyddio grwp \"rhannu ffeiliau\" .\n"
+"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp. "
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Corea (Gogledd)"
+msgid "Slovenian"
+msgstr "Slfenaidd"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts a Nevis"
+msgid "Libya"
+msgstr "Libya"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comoros"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"-Llosgi i CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodia"
+msgid "Table"
+msgstr "Tabl"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Siapan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi libsafe os yw ar y system."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Yr Iorddonen"
+msgid "Stop Server"
+msgstr "Atal y Gwasanaethwr"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Dewis thema ar\n"
+"gyfer lilo a bootsplash,\n"
+"mae modd eu dewis\n"
+"ar wah芒n"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Ynys yr I芒"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Ymresymiadau: (arg, listen_tcp=None)\n"
+"\n"
+"Caniat谩u/Gwrthod cysylltiadau X. Ym. cyntaf pennu'r hyn sy'n digwydd\n"
+"aochr y cleient: ALL (caniat谩u pob cysylltiad), LOCAL (dim ond\n"
+"cysylltiadau lleol) a NONE (dim cysylltiadau)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irac"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
+msgid "Use auto detection"
+msgstr "Defnyddio awto ganfod"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "India"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
+"megis, Midnight Commander. Mae hefyd yn caniat谩u gweithrediadau torri a \n"
+"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
+"consol. "
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Started on boot"
+msgstr "Cychwyn y peiriant"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Iwerddon"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Ymunwch 芒'r timau cefnogi MandrakeSoft a'r Linux Community ar-lein i rannu "
+"eich gwybodaeth ac i helpu eraill drwy ddod yn Arbenigwr cydnabyddedig ar y "
+"safle cefnogaeth dechnegol."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Mae modd gosod y dewisiadau canlynol i addasu\n"
+"diogelwch eich system. Os oes arnoch esboniadau, cliciwch ar cymorth.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hwngari"
+msgid "Automatically find available printers on remote machines"
+msgstr "Canfod argraffyddion ar gyfrifiaduron pell, yn awtomatig."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Cadw i d芒p ar ddyfais: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Croatia"
+msgid "East Timor"
+msgstr "Dwyrain Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Proffl dileu"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard and McDonald Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Caniat谩u/Gwrthod rhestr defnyddwyr ar y system ar rheolwyr arddangos (kdm "
+"and gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Gosod Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Tsieina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "canfuwyd"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Rhaid i'r rhwydwaith gael ei ailgychwyn. Ydych chi am ei ailgychwyn?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Pecynnau"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Methu ysgrifennu /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia and the South Sandwich Islands"
+msgid "SECURITY WARNING!"
+msgstr "RHYBUDD DIOGELWCH!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Equatorial Guinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Offeryn Trosglwyddo o Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "Pob iaith"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Greenland"
+msgid "Removing %s"
+msgstr "Tynnu %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Profi eich cysylltiad..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Maint storfa"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "French Guiana"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Mae'r cyfrinair wedi ei alluogi, ond ni argymhellir ei ddefnyddio fel "
+"cyfrifiadur rhwydwaith."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid "Start sector: "
+msgstr "Sector dechreuol: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Y Deyrnas Unedig"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Ynysoedd Faroe"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
+"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
+"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
+"ei enwi yn y gronfa ddata. Felly, edrychwch i weld 芒 yw'r dewis yn gywir a "
+"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
+"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgr卯n "
+"nesaf.\n"
+"\n"
+"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Bad password on %s"
+msgstr "Cyfrinair gwallus yn %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Islands (Malvinas)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Mae un argraffydd anhysbys wedi ei gysylltu'n uniongyrchol 芒'ch system"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Ffiji"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Y Ffindir"
+msgid "Security Administrator (login or email)"
+msgstr "Gweinyddwr Diogelwch (mewngfnodi neu e-bost)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Ethiopia"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Mae'n ddrwg gennym dim ond cnewyllyn 2.4 sy'n cael ei gynnal."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Sbaen"
+msgid "Romanian (qwerty)"
+msgstr "Romanaidd (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "O dan ddatblygiad...arhoswch."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Western Sahara"
+msgid "Czech Republic"
+msgstr "Gweriniaeth Tsiec"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Yr Aifft"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Algeria"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominican Republic"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Denmarc"
+msgid "Old configuration (isdn4net)"
+msgstr "Hen ffurfweddiad (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Sound card"
+msgstr "Cerdyn sain"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Cyprus"
+msgid "Import Fonts"
+msgstr "Mewnforio Ffontiau"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Christmas Island"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Mae gennych un rhaniad MicroSoft Windows mawr\n"
+"Awgrymir eich bod yn newid maint y rhaniad\n"
+"(cliciwch arno, ac yna clicio \"Newid maint\"]"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
+msgid "Suppress Temporary Files"
+msgstr "Llethu Ffeiliau Dros dro"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Ciwba"
+msgid "Change partition type"
+msgstr "Newid math y rhaniad"
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "Colombia"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Cydraniad\n"
+"\n"
+" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
+"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
+"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
+"ar y dangosydd."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Cameroon"
+msgid "Network Options"
+msgstr "Dewisiadau Rhwydwaith"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Dangos thema\n"
+"yn y consol"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook Islands"
+msgid "Statistics"
+msgstr "Ystadegau"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "(on %s)"
+msgstr "(ar %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Y Swisdir"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Central African Republic"
+msgid "average"
+msgstr "cyfartaledd"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Enw'r argraffydd newydd"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos (Keeling) Islands"
+msgid "Equatorial Guinea"
+msgstr "Equatorial Guinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Canada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"Ganiat谩u/Gwrthod awtofewngofnodi."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Adeiladu Cadw wrth Gefn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Belarus"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
+"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Does dim dewis arall ar gael ar hyn o bryd"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Island"
+msgid "Romanian (qwertz)"
+msgstr "Romanaidd (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Write Config"
+msgstr "Ysgrifenu ffurfweddu"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Mae'r daemon llwybrydd yn caniat谩u i'r tabl llwybrydd IP awtomatig \n"
+"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
+"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
+"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brazil"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"Ganiat谩u/Gwrthod mewngofnodi gwraidd pell"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Browse"
+msgstr "Pori"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Hoffech chi gysylltu 芒'r Rhyngrwyd nawr?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgaidd"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid "Do you have an ISA sound card?"
+msgstr "A oes gennych gerdyn sain ISA?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bwlgaria"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
+"Nid wyf yn medru gosod y math yma o gysylltiad."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "Meth creu lluniau o'r sgr卯n cyn rhannu"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Enw Gwesteiwr"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia ac Herzegovina"
+msgid "/File/Save _As"
+msgstr "/Ffeil/Cawd _fel"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaijan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"I gael mynediad at argraffyddion ar wasanaethwyr CUPS pell yn eich "
+"rhwydwaith lleol dim ond angen i chi gychwyn yr dewis \"Canfod "
+"argraffyddion ar gyfrifiaduron pell\" ; bydd y gwasanaethwyr CUPS yn dweud "
+"wrth eich cyfrifiadur am eu argraffydd. Mae pob argraffydd sy'n hysbys i'ch "
+"cyfrifiadur yn cael ei restri yn adran \"Argraffyddion pell\" prif ffenestr "
+"Printerdrake. Os yw/nad yw eich gwasanaethwr(wyr) CUPS ar eich rhwydwaith "
+"lleol rhaid rhoi cyfeiriad(au) IP ac yn ddewisol rhif(au) porth yma i gael "
+"gwybodaeth am yr argraffydd gan y gwasanaethwr(wyr)."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"Nid yw %s yng nghronfa ddata sganwyr. Hoffech chi ei ffurfweddu 芒 llaw?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Awstralia"
+msgid "Delay before booting default image"
+msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "American Samoa"
+msgid "Restrict command line options"
+msgstr "Cyfyngu dewisiadau llinell orchymyn"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Yr Ariannin"
+msgid "East Europe"
+msgstr "Dwyrain Ewrop"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarctica"
+msgid "Use free space"
+msgstr "Defnyddiwch le gwag"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "defnyddiwch dhccp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Netherlands Antilles"
+msgid "Mail alert"
+msgstr "Rhybudd e-bost"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenia"
+msgid "Internet configuration"
+msgstr "Ffurfweddiad rhyngrwyd"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albania"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Canfyddwyd %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua a Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Awtoganfod_argraffydd"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "United Arab Emirates"
+msgid "Finish"
+msgstr "Gorffen"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Dangoswch y pecynnau dewis awtomatig"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "CPU flags reported by the kernel"
+msgstr "Baneri cpu'n cael eu dangos gan y cnewyllyn"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Gosodiadau cylch %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
-"Defnyddiwch cnewyllyn 2.4"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "SYMUDWCH YR OLWYN!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "I ysgogi'r llygoden,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Profwch y llygoden"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Dim llygoden"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Aeth rhywbeth o'i le! - ydy mkisofs wedi ei osod?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "dim"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botwm"
+msgid "Please try again"
+msgstr "Ceisiwch eto"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 fotwm"
+msgid "The model is correct"
+msgstr "Mae'r model yn gywir"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 botwm"
+msgid "FAT resizing failed: %s"
+msgstr "Methodd newid maint FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "Dewis pecynnau unigol."
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Nid oes modd newid maint y rhaniad"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
+msgid "Location"
+msgstr "Lleoliad"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "UDA (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Jwrnaleiddiwyd FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Y peiriant hwn"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Llythyren gyrrwr DOS: %s (dim ond dyfalu)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Systemau Llygoden"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "peidio cynnwys modiwlau scsi"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Llygoden 3 Botwm Generig"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Teulu'r cpu (ee 6 am ddosbarth i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Llygoden 2 Fotwm Generig"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
+"ffurfweddu\n"
+"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
+"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "cyfresol"
+msgid "Keyboard layout: %s\n"
+msgstr "Cynllun allweddell: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Yma medrwch benderfynu a ddylai'r argraffyddion sy'n gysylltiedig 芒'r "
+"cyfrifiadur hwn fod ar gael i gyfrifiaduron pell a pha rai."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Olwyn"
+msgid "Maltese (US)"
+msgstr "Malteg (UDA)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Generig"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
+"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "Cerdyn Teledu"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Arbennigwr > Cyffredinol"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Llygoden Olwyn PS Generig"
+msgid "Size"
+msgstr "Maint"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Safonol"
+msgid "Greenland"
+msgstr "Greenland"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Llygoden - Sun"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Cau'r goeden"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Estyn y goeden"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Gwybodaeth"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gwall wrth ysgrifennu i ffeil %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Ffeil wrth gefn gwallus"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Methodd adfer o ffeil %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Nid yr label t芒p cywir. T芒p wedi ei labelu %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
-"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
-"rhaniadau estynedig "
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "maethodd y gosodiad"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "efallai"
+"Mae gosodiad Rhannu Cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
+"Mae wedi ei alluogi. \n"
+"\n"
+"Beth hoffech ei wneud?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "hyfryd"
+msgid "Delete All NBIs"
+msgstr "Dileu Pob NBI"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "hyfryd iawn"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Mae'r deialog yn caniatau i chi wenud m芒n newidiadau i'ch cychwynnwr:\n"
+"\n"
+" * \"Cychwynnydd i'w ddefnyddio\": mae gennych dri dewis:\n"
+"\n"
+" * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
+"\n"
+" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
+"rhagwyneb graffigol.\n"
+"\n"
+" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
+"dewislen\n"
+"testun.\n"
+"\n"
+" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
+"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y\n"
+"cychwynnydd gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd\n"
+"yn oed ar ddisg meddal (\"/dev/fd0\")\n"
+"\n"
+" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
+"cyfrifiadur\n"
+"dyma'r oedi sy'n caniat谩u i'r defnyddiwr ddewis o fewn y ddewislen "
+"cychwynnydd,\n"
+"cychwynnydd arall yn lle'r un rhagosodedig.\n"
+"\n"
+"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
+"yma),\n"
+"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
+"Mandrake.\n"
+"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
+"y\n"
+"dewisiadau hyn!!\n"
+"\n"
+"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
+"uwch,\n"
+"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol."
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "pwysig"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"os wedi ei osod, anfon yr adroddiad e-bost i'r cyfeiriad e-bost neu ei anfon "
+"i'r gwraidd."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "rhaid cael"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Pa ffurfweddiad XFree hoffech ei gael?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
+msgid "More"
+msgstr "Rhagor"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "methodd mkraid"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
+"bosibl.\n"
+"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
+"derbyn\n"
+"cysylltiad gan amryw o gleientiaid. Sylwer: os maei cleient yn unig yw eich "
+"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "methodd mkraid (efallai bod raidtools ar goll)"
+msgid "Account Password"
+msgstr "Cyfrinair y Cyfrif"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Rydych wedi penderfynu gosod y cychwynnydd ar raniad.\n"
+"Mae hyn yn awgrymu bod gennych gychwynnydd ar ddisg caled eisoes: (ee System "
+"Commander).\n"
+"\n"
+"Gyda pha ddisg ydych chi'n cychwyn?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "Aros"
+msgid "Tajik keyboard"
+msgstr "Bysellfwrdd Tajig"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "Cychwyn"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Mae modd i chi gop茂o ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
+"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
+"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
+"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
+"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "Cychwyn"
+msgid "Font List"
+msgstr "Rhestr Ffontiau"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Services and deamons"
-msgstr "Gwasanaethau a daemonau"
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
+" i alluogi'r cychwynnydd. Os nad ydych yn gweld anogwr y\n"
+" cychwynnydd wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
+" gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
+" Yna teipiwch: shut-down\n"
+"Wrth gychwyn eto dylech weld anogwr y cychwynnydd."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "ataliwyd"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
+"neu Anhysbys ac ni fydd cychwynydd yaboot\n"
+"yn gweithio ar eich cyfer\n"
+"Bydd y gosodiad yn parhau ond bydd\n"
+"rhaid defnyddio BootX i gychwyn\n"
+"eich peiriant."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "running"
-msgstr "rhedeg"
+msgid "Select file"
+msgstr "Dewiswch ffeil"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
-"cyfrifiadur"
-
-#: ../../services.pm:1
-#, c-format
-msgid "Database Server"
-msgstr "Gwasanaethwr Cronfa Ddata"
+"Dewis y rhwydwaith neu westeiwr ddylai'r argraffyddion lleol fod ar gael "
+"iddynt:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Gweinyddu Pell"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
+"deialogau argraffu mewn nifer o raglenni, ond yma nid ydynt yn darparu'r "
+"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Rhannu Ffeiliau"
+msgid "Japan"
+msgstr "Siapan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Rhyngrwyd"
+msgid "Print option list"
+msgstr "Rhestr ddewis argraffu"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Argraffu"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
+"allgofnodi"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Yn cychwyn Gwasanaethwr Ffont X (mae hyn yn orfodol i XFree i redeg).."
+msgid "Search servers"
+msgstr "Chwiliwch am wasanaethwyr"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
+msgid "NCP queue name missing!"
+msgstr "Mae enw rhes NCP ar goll"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
-"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
-"syslog bob tro."
+"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
+"defnyddio eich rhwydwaith."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Cychwyn y system sain ar eich peiriant"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom wedi ei labelu \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Mae'r protocol rwho'n caniat谩u i ddefnyddwyr pell gael rhestr o'r \n"
-"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
-"daemon rwho (yn debyg i fysedd)."
+"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
+"hap o ansawdd uchel."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Mae protocol ruser yn caniat谩u i ddefnyddwyr ar rwydwaith i adnabod\n"
-"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
+"Wedi methu gwirio system ffeiliau %s. Hoffech chi drwsio'r gwallau? (gofal, "
+"mae modd colli data)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Mae'r protocol rstat yn caniat谩u i ddefnyddwyr rhwydwaith \n"
-"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
+msgid "Turn your computer into a reliable server"
+msgstr "Trowch eich peiriant i fod yn wasanaethwr dibynadwy"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Mae'r daemon llwybrydd yn caniat谩u i'r tabl llwybrydd IP awtomatig \n"
-"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
-"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
-"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
+msgid " (driver %s)"
+msgstr " (gyrrwr %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Dynodi dyfeisiau bras i ddyfeisiau bloc (megis dig caled rhaniadau), \n"
-"ar gyfer defnydd rhaglenni megis Oracle neu chwaraewyr DVD."
+"Ffeil(iau) Cylch-么l:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
-"hap o ansawdd uchel."
+msgid "I don't know"
+msgstr "Dim syniad"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
-"peiriant i'r llall."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", gwesteiwr TCP/IP \"%s\", porth %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
-"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
-"porthmap\n"
-"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
-"sy'n\n"
-"gwneud defnydd o fecanwaith RPC."
+"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
+"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
+"\n"
+"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
+"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
+"gwerthoedd.\n"
+"\n"
+"Ydych chi eisiau parhau?\n"
+"?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
-"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
-"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
-"sydd ddim ei angen."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
+"\n"
+"\n"
+"Mae eich cerdyn yn defnyddio'r gyrrwr %s\"%s\" ar hyn o bryd ( y gyrrwr "
+"arferol ar ei gyfer yw \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
-"ac XFree wrth gychwyn y peiriant."
+msgid "Post Uninstall"
+msgstr "Wedi'r dad osod"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
-"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
-"yn darparu'r gallu i gloi ffeiliau NFS."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
-"rhwydweithiau TCP/IP.\n"
-"Mae'r gwasanaeth yn darparu ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
-"ffurfweddu\n"
-"drwy'r ffeil /etc/exports."
+msgid "Cpuid level"
+msgstr "Lefel cpuid"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
-"ffurfweddu i gychwyn wrth gychwyn y peiriant."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongoleg (cyrillic)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
-"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
+msgid "Add a module"
+msgstr "Ychwanegu modiwl"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
-"gydrannu enwau gwestai i'r cyfeiriadau IP."
+msgid "Profile to delete:"
+msgstr "Proffil i'w ddileu:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
-"gwasanaethwyr cyflym a chyraeddadwy."
+msgid "Local measure"
+msgstr "Mesur lleol"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
-"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
-"argraffydd (ion)."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
+msgid "Account Login (user name)"
+msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
+msgid "Fdiv bug"
+msgstr "Gwall Fdiv"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
-"gyfer /usr/include/linux{autoconf,version}.h"
+"Ffurfweddwr Drakfirewall\n"
+"\n"
+"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad\n"
+"Rhwydwaith/Rhyngrwyd gyda Drakconnect cyn mynd ymhellach."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
-"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
-"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
-"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
-"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
-"o'r rhwydwaith."
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
-"o wasanaethau rhyngrwyd eraill, yn 么l y galw. Mae'n gyfrifol am gychwyn\n"
-"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
-"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
+msgid "Path selection"
+msgstr "Dewis llwybr"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
-"iwasanaethu ffeiliau HTML a CGI."
+msgid "Name/IP address of host:"
+msgstr "Enw/cyfeiriad IP gwesteiwr"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn 么l \n"
-"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
-"megis, Midnight Commander. Mae hefyd yn caniat谩u gweithrediadau torri a \n"
-"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
-"consol. "
+"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
+"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
+"Nid oes gwerth ysgrifennu i'r ddisg"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
-"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
-"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
-"a dewisiadau ffurfweddu mwy pwerus."
+msgid "Printer host name or IP missing!"
+msgstr "Mae enw'r gwesteiwr argraffu neu IP ar goll!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
-"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
-"cyfartaledd y llwyth yn ddigon isel."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a mewngofnodi drwy\n"
-"syslog. Mae modd ei ddefnyddio i gau'r peiriant pan mae'r batri'n isel."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron trefnydd gorchymyn cyfnodol"
+"Rhaid i %s gael ei ffurfweddu gan printerdrake.\n"
+"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Cychwynnwch system sain ALSA (Pensaern茂aeth Sain Linux Uwch)"
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Gosod pecynnau..."
+msgid "Japan (cable)"
+msgstr "Siapan (cable)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Defnydd: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
+"芒'r cyfrifiadur hwn,yn gysylltiedig 芒'r rhwydwaith neu i beiriant Windows "
+"pell.\n"
+"\n"
+"Os oes gennych argraffydd(ion) yn gysylltiedig 芒'r peiriant, cysylltwch nhw "
+"芒'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
+"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
+"ymlaen.\n"
+"\n"
+"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
+"awtoganfod argraffyddion sy'n gysylltiedig 芒'r peiriant hwn. Felly, "
+"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
+"\n"
+"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
+"eich argraffydd(ion) ar hyn o bryd."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" cydraniad XFdrake"
+msgid "Initial tests"
+msgstr "Prawf Init"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Continue"
+msgstr "Parhau"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Custom Restore"
+msgstr "Adfer Dewisol"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[DEWIS]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"Cerdyn sain\": os yw cerdyn sain yn cael ei ganfod ar eich cyfrifiadur, "
+"bydd \n"
+"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sydd ar eich\n"
+"cyfrifiadur sy'n cael ei ddangos, yna cliciwch ar y botwm a dewis\n"
+" gyrrwr arall."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Seiliedig ar sgript"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Rhaglen Cyswllt a Monitro'r Rhwydwaith a'r Rhyngrwyd\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "Error reading file %s"
+msgstr "Gwall wrth ddarllen ffeil %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "Gosodiad PLL:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[bysellfwrdd]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[DEWISIADAU]...\n"
-"Ffurfweddwr Gwasanaethwr Terfynell Mandrake\n"
-"--enable : galluogi MTS\n"
-"--disable : analluogi MTS\n"
-"--start : cychwyn MTS\n"
-"--stop : atal MTS\n"
-"--adduser : ychwanegu defnyddiwr system presennol i MTS (angen enw "
-"defnyddiwr)\n"
-"--deluser : dileu defnyddiwr system presennol o MTS (angen enw "
-"defnyddiwr)\n"
-"--addclient : ychwanegu peiriant cleient i MTS (angen cyfeiriad MAC, "
-"IP, enw delwedd nbi)\n"
-"--delclient : dileu peiriant cleient i MTS (angen cyfeiriad MAC, IP, "
-"enw delwedd nbi)"
+msgid " on "
+msgstr "ar "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Rhaglen mewnforio a monitro "
-"ffontiau \n"
-"--windows_import : mewnforio o bob rhaniad windows.\n"
-"--xls_fonts : dangos pob ffont sy'n bodoli o xls\n"
-"--strong : cadarnhad cryf o ffont.\n"
-"--install : derbyn unrhyw ffeil ffont ac unrhyw gyfeiriadur.\n"
-"--uninstall : dadosod unrhyw ffont neu gyfeiriadur ffont.\n"
-"--replace : amnewid pob ffont os yw'n bod\n"
-"--application : 0 dim rhaglen.\n"
-" : 1 pob rhaglen ar gael yn cael ei gynnal.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "The URL must begin with http:// or https://"
+msgstr "Rhaid i'r URL gychwyn gyda http:// neu https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[DEWISIADAU] [ENW_RHAGLEN]\n"
-"\n"
-"DEWISIADAU:\n"
-" --help - argraffu'r neges cymorth.\n"
-" --report - dylai'r rhaglen fod yn un o offer mandrake\n"
-" --incident - ylai'r rhaglen fod yn un o offer mandrake"
+"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
+"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
+"cael eu cynnal gan bob sbwlydd ."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Systwmau Gweithredu eraill (SunOS..)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Gosod/Diweddaru"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pecyn"
#: ../../standalone.pm:1
#, c-format
@@ -7385,4880 +6890,5314 @@ msgstr ""
"--help : show this message.\n"
"--version : show version number.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Angen Dilysu Parth"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn 么l eich dewis) unrhyw fersiwn diweddarach.\n"
"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Gorffen"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Diweddariadau"
+" Diolch:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Ffurfweddu gwasanaethau"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Ffurfweddu X"
+msgid "Use libsafe for servers"
+msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Gosod cychwynnwr"
+msgid "Icelandic"
+msgstr "Eislandaidd"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Ffurfweddu rhwydwaith"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Defnydd: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Ychwanegu defnyddiwr"
+msgid "Please relog into %s to activate the changes"
+msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Cyfrinair gwraidd"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Gosod y system"
+msgid "Lilo/grub mode"
+msgstr "Modd Lilo/grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Dewis pecynnau i'w gosod"
+msgid "Output"
+msgstr "Allbwn"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Fformatio rhaniadau"
+msgid "Circular mounts %s\n"
+msgstr "Gosodiadau cylch %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Creu Rhanniadau"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Dewis eich bysellfwrdd"
+msgid "HardDrive / NFS"
+msgstr "Disg Caled / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Dewis dosbarth gosod"
+msgid "a number"
+msgstr "rhif"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Canfod disg caled"
+msgid "Swedish"
+msgstr "Swedaidd"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Ffurfweddu llygoden"
+msgid "Which %s driver should I try?"
+msgstr "Pa yrrwr %s ddylwn drio?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Trwydded"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Iaith"
+msgid "Filesystem types:"
+msgstr "Mathau o system ffeiliau:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", dyfais amlbwrpas ar HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Iawn"
+msgid "Northern Mariana Islands"
+msgstr "Northern Mariana Islands"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "dim"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "defnyddiwr :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (gyrrwr gosod dangoswr)"
+msgid "Please enter your password"
+msgstr "Rhowch eich cyfrinair"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
+"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
+"un cyfredol):"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D"
+msgid "Floppy"
+msgstr "Disg Meddal"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"mewn 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Gwiriwch os ydych am ddileu eich cyfrwng RW(Sesiwn 1af)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"mewn 2D."
+msgid "Ghostscript referencing"
+msgstr "cyfeirio Ghostscript"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree: %s"
+msgid "Bootloader"
+msgstr "Cychwynydd ar waith"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Ffurfweddu cerdyn \"%s\" %s yn unig"
+msgid "Move"
+msgstr "Symud"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Defnyddiwch estyniad Xinerama"
+msgid "Bootloader to use"
+msgstr "Bootloader ar waith"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Ffurfweddu pob pen yn annibynnol"
+msgid "SMB server host"
+msgstr "Gwasanaethwr gwesteiwr SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pa ffurfweddiad XFree hoffech ei gael?"
+msgid "Name Servers:"
+msgstr "Enwi Gwasanaethwr:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Ffurfweddiad XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+" Rhybudd\n"
+"\n"
+"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
+" ddarn, nid oes caniat芒d i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
+" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
+"\n"
+"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
+" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
+" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
+" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
+"\n"
+"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
+"wah芒n i\n"
+" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
+" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
+"terfynu eich hawl o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
+"chi,\n"
+"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
+"gyfer\n"
+" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol 芒\n"
+"dosbarthwr neu olygydd y cydrannau hynny.\n"
+"Mae trosglwyddo i drydydd parti neu gop茂o'r cydrannau hynny gan gynnwys y\n"
+" ddogfennaeth, wedi ei wahardd fel rheol\n"
+"\n"
+"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
+"perthnasol\n"
+" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
+"sy'n\n"
+" berthynol i raglenni meddalwedd.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Dewiswch faint y cof eich cerdyn graffeg"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Mae eich system yn cynnal ffurfweddiad amlben.\n"
-"Beth hoffech ei wneud?"
+"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
+"gwasanaethwyr cyflym a chyraeddadwy."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Ffurfweddiad amlben"
+msgid "4 billion colors (32 bits)"
+msgstr "4 biliwn o liwiau (32 did)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Dewiswch wasanaethwr X"
+msgid "Micronesia"
+msgstr "Micronesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "Gwasanaethwr X"
+msgid "License"
+msgstr "Trwydded"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "16 MB neu fwy"
+msgid "This may take a moment to generate the keys."
+msgstr "Bydd hyn yn cymryd amser i gynhyrchu'r allweddi"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Awtoganfod argraffydd (Argraffyddion lleol, TCP/Socket, ac SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "USB Sagem (defnyddio pppoa)"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Digwyddodd gwall - ni chanfyddwyd dyfeisiau dilys i greu systemau ffeil "
+"arnynt. Gwiriwch eich caledwedd am ffynhonnell yr anhawster."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "Dynodiad Prosesydd"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "Datrys problemau sain"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Pwylaidd (gosodiad qwerty)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "cychwyn nawr"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Cadw'r newid?\n"
-"Y ffurfweddiad presenol yw:\n"
"\n"
-"%s"
+"Gweithgaredd Drakbackup drwy CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Dewisiadau"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
+"%s. \n"
+"\n"
+"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
+"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
+"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
+"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
+"\n"
+"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Prawf"
+msgid "Host \"%s\", port %s"
+msgstr ",Gwesteiwr \"%s\", porth %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Cydraniad"
+msgid "This partition can't be used for loopback"
+msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-么l"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Cerdyn Graffeg"
+msgid "received: "
+msgstr "derbyniwyd:"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Graddfa adfywio fertigol"
+msgid "Right Alt key"
+msgstr "Bysell Alt dde"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Graddfa adfywio llorweddol"
+msgid "the list of alternative drivers for this sound card"
+msgstr "rhestr o yrrwr eraill ar gyfer eich cerdyn sain"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Y ddau baramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
-"holl sgr卯n yn cael ei adnewyddu, ac yn fwyaf pwysig y raddfa cydamseru\n"
-"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
-"\n"
-"Mae'n BWYSIG IAWN nad ydych yn enwi monitor gyda graddfa cydamseru\n"
-"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
-"hynny.\n"
-"Os oes gennych amheuaeth, dewiswch raddfa is."
+msgid "Gateway"
+msgstr "Mynedfa"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Methodd ymholiad Plug'nPlay. Dewiswch y dangosydd cywir"
+msgid "Scanner sharing"
+msgstr "Rhannu sganiwr"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Gwerthwr"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunisia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
+msgid "Profile: "
+msgstr "Proffil:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Cerdyn graffeg: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Cliciwch ar ddyfais yn y goeden chwith i gael at ei wybodaeth"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
+msgid "XawTV isn't installed!"
+msgstr "Nid yw XawTV wedi ei osod!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Cydraniadau"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Creu/Trosglwyddo\n"
+"allweddi wrth gefn ar gyfer SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 biliwn o liwiau (32 did)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
+msgid "old static device name used in dev package"
+msgstr "hen enw dyfais sefydlog yn cael ei ddefnyddio mewn pecyn dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
+msgid "This label is already used"
+msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
+"芒'r cyfrifiadur hwn, yn gysylltiedig 芒'r rhwydwaith.\n"
+"\n"
+"Os oes gennych argraffydd(ion) yn gysylltiedig 芒'r peiriant, cysylltwch nhw "
+"芒'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
+"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
+"ymlaen.\n"
+"\n"
+"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
+"awtoganfod argraffyddion sy'n gysylltiedig 芒'r peiriant hwn. Felly, "
+"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
+"\n"
+"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
+"eich argraffydd(ion) ar hyn o bryd."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "A' hwn yw'r gosodiad cywir?"
+msgid "Connection Time: "
+msgstr "Amser Cysylltiad:"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
+msgid "select perm file to see/edit"
+msgstr "dewis ffeil perm i weld/golygu"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Digwyddodd gwall:\n"
-"%s\n"
-"Ceisiwch newid parammedrau"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Rhybudd: gall profi'r cerdyn graffeg hwn rewi eich cyfrifiadur"
+"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar 么l gorffen\n"
+"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ydych chi eisiau profi'r ffurfweddiad?"
+msgid "Use group id for execution"
+msgstr "Defnyddio enw grwp i weithredu"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Prawf o'r ffurfweddiad"
+msgid "Choose the default user:"
+msgstr "Dewis y defnyddiwr rhagosodedig:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Pa norm mae eich teledu'n ei ddefnyddio?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Mae'n edrych fel bod gan eich cerdyn graffig gyswlltTV-OUT.\n"
-"Mae modd ei ffurfweddu i weithio drwy byffer ffr芒m.\n"
"\n"
-"Rhaid cysylltu eich cerdyn graffig 芒'ch teledu cyn cychwyn eich "
-"cyfrifiadur.\n"
-"Dewiswch \"TVout\" yn y cychwynnydd\n"
-"\n"
-"Ydy'r nodwedd hon gennych?"
+"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
+"cael eu canfod yn awtomatig."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar 么l cychwyn\n"
-"Hoffech chi i XFree ddechrau wedi i chi ail-gychwyn?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Rhyngwyneb graffigol wrth gychwyn"
+"Gallwch ddewis ieithoedd eraill fydd ar gael ar 么l gosod. Dewiswch\n"
+"pa iaith yr hoffech ei osod. Byddant ar gael pan fydd eich gosodiad\n"
+"wedi ei gwblhau a phan fyddwch yn ailgychwyn eich system."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gyrrwr XFree86: %s\n"
+msgid "Domain"
+msgstr "Parth"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Gwasanaethwr XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Union faint o RAM os oes angen (canfod %dMB)"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Cydraniad: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"Cychwynnydd GNU/Linux yw LILO a grub. Fel rheol mae'r rhan yma'n\n"
+"digwydd yn awtomatig. Bydd DrakX yn dadansoddi'r adran cychwyn\n"
+"disg a gweithredu yn 芒'r yr hyn mae'n ei ganfod yno.\n"
+"\n"
+" *os yw'n canfod adran cychwyn Windows, bydd yn ei amnewid gyda\n"
+"adran cychwyn grub/LILO. O ganlyniad bydd modd i chi gychwyn un\n"
+"ai GNU/Linux neu system arall.\n"
+"\n"
+" *os fydd adran gychwyn grub neu LILO'n cael ei ganfod bydd yn ei\n"
+"amnewid gydag un mwy diweddar.\n"
+"\n"
+"Os nad yw'n medru penderfynu, bydd DrakX yn gofyn i chi lle i osod\n"
+"y cychwynnydd.\n"
+"\"Dyfais cychwyn\": fel rheol ni fydd angen i chi newid o'r rhagosodedig\n"
+"(\"Adran gyntaf gyrrwr (MBR)\"), ond os yw'n well gennych mae modd\n"
+"gosod y cychwynnydd ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn\n"
+"oed, ar ddisg meddal (\"Disg Meddal\")."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dyfnder lliw: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Dns 2 y darparwr (dewisol)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
+msgid "Boot device"
+msgstr "Dyfais cychwyn"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Pa raniad ydych chi am newid ei faint?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Offeryn i fonitro eich cofnodion"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais llygoden: %s\n"
+msgid "detected on port %s"
+msgstr "canfyddwyd ar borth %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math o lygoden: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Cynllun allweddell: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Cerdyn graffeg: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Dewisiadau: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Pwynt gosod:"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Gwasanaethwr:"
+msgid "Splash selection"
+msgstr "Dewis sgr卯n croeso"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Rhaid i'r URL gychwyn gyda http:// neu https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Rhowch URL gwasanaethwr WebDAV"
+msgid "ISDN Configuration"
+msgstr "Ffurfweddiad ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Pwynt gosod"
+msgid "high"
+msgstr "uchel"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Gwasanaethwr"
+msgid "Internet Connection Sharing"
+msgstr "Rhannu Cysylltiad 芒'r Rhyngrwyd"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Gosod"
+msgid "Choose file"
+msgstr "Dewis ffeil"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Dad-osod"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
+"atgyweirio gyda llaw ar 么l y gosodiad."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Newydd"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Argraffu/Mynediad Cardiau Llun ar \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"Protocol yw WebDAV sy'n eich caniat谩u i chi osod gwasanaethwr gwe'n lleol\n"
-"a'i drin fel system ffeilio lleol ( ar yr amod bod y gwasanaethwr lleol wedi "
-"ei\n"
-"ffurfweddi fel gwasanaethwr WebDAV). Os hoffech ychwanegu pwyntiau\n"
-"gosod WebDAV, dewiswch \"Newydd\""
+"Ydych chi am ganiat谩u argraffu ar yr argraffyddion enwir uchod neu ar yr "
+"argraffyddion ar y rhwydwaith lleol?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Defnyddiwch \"%s\" yn lle hynny"
+msgid "Printer default settings"
+msgstr "Gosod yr Argraffydd Rhagosodedig"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Math"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Llygoden Olwyn PS Generig"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
+msgid "Removing old printer \"%s\"..."
+msgstr "Tynnu hen argraffydd \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Dileu"
+msgid "Select a device !"
+msgstr "Dewis dyfais!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Creu"
+msgid "Remove selected server"
+msgstr "Tynnu'r gwesteiwr"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Mathau o system ffeiliau:"
+msgid "French Southern Territories"
+msgstr "French Southern Territories"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Gwag"
+msgid "the vendor name of the processor"
+msgstr "enw gwerthwr y prosesydd"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "Dylai'r holl ddata ar y rhaniad gael ei gadw wrth gefn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Gosod pecynnau %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Gwirio'r ddyfais a ffurfweddu HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "I gael mwy o raniadau, dil毛wch un i greu rhaniad estynedig"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Jwrnaleiddiwyd FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Mae eich argraffydd wedi ei ffurfweddu'n awtomatig i rhoi mynediad i chi i'r "
+"gyrrwr cerdyn llun o'c cyfrifiadur. Mae modd i chi gael mynediad at eich "
+"cardiau llun drwy'r rhaglen graffigol \"MtoolsFM\" (Dewislen: \"Rhaglenni\" -"
+"> \"Offer ffeil\" -> \"Rheolwr Ffeiliau MTools\") neu ar y llinell "
+"orchymyn: \"mtools\" (\"man mtools\" am ragor o wybodaeth) Bydd ys system o "
+"dan yrrwr \"p\", neu lythrennau canlynol pan fydd gennych fwy nag un "
+"argraffydd HP gyda gyrwyr cerdyn llun. Yn MToolsFM\" mae modd newid rhwng "
+"llythrennau gyrwyr drwy'r maes ar ben uchaf de'r rhestr."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Dewis pecynnau i'w gosod"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Heb ganfod gyrwyr caled"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr "\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Cliciwch ar raniad"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Mae gennych un rhaniad MicroSoft Windows mawr\n"
-"Awgrymir eich bod yn newid maint y rhaniad\n"
-"(cliciwch arno, ac yna clicio \"Newid maint\"]"
+"Nid oes gan eich system ddigon o le ar 么l ar gyfer gosodiad neu uwchraddiad "
+"(%d> %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Dewiswch weithred"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
+"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"Argraffydd\": mae clicio ar y botwm\"Ffurfweddu\" yn agor dewin\n"
+"ffurfweddu argraffydd. Darllenwch y pennawd penodol yn y 'Starter Guide'\n"
+"am ragor o wybodaeth am sut i osod argraffydd newydd. Mae'r rhyngwyneb\n"
+"yn debyg i'r un welwyd wrth osod y system."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Dewin"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
-"ddigon)\n"
-"ar ddechrau'r ddisg."
+msgid "Network interface"
+msgstr "Rhyngwyneb rhwydwaith"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
+msgid "Reading printer data..."
+msgstr "Darllen data argraffydd..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
+msgid "Korean keyboard"
+msgstr "Bysellfwrdd Coreaidd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Allwedd amgryptio (eto)"
+msgid "Not connected"
+msgstr "Heb gysylltu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Allwedd amgryptio"
+msgid "Greek"
+msgstr "Groegaidd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Os yw \\fIarg\\fP = ALL caniat谩 /etc/issue a /etc/issue.net i fodoli. Os yw "
+"\\fIarg\\fP = NONE\n"
+"dim materion heblaw caniat谩u /etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts a Nevis"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Mae'r allwedd amgryptio'n rhy syml (mae'n rhaid bod o leiaf %d nod o hyd)"
+"Roedd y trosglwyddiad yn llwyddiannus\n"
+"Efallai'r hoffechi wirio eich bod yn medru mewngofnodi i'r gwasanaether "
+"gyda:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"heb dderbyn cais am gyfrinair"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
+msgid "Enable OF Boot?"
+msgstr "Galluogi Cychwyn OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Allwedd amgryptio system ffeil : "
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Does dim modd defnyddio JFS ar raniadau llai na 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Type: "
-msgstr "Math: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "VertRefresh Monitor: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "ar sianel %d id %d\n"
+msgid "path"
+msgstr "llwybr"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tabl rhaniad math: %s\n"
+msgid "Mount point"
+msgstr "Pwynt gosod"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dias LVM %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Digwyddodd gwall:\n"
+"%s\n"
+"Ceisiwch newid parammedrau"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Info: "
-msgstr "Gwybodaeth:"
+msgid "Restore system"
+msgstr "Adfer y system"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r sganiwr lleol fod ar gael:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
+msgid "The DHCP end ip"
+msgstr "Enw terfyn DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Darllen yn unig"
+msgid "Another one"
+msgstr "Un arall"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Dyfais: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Mae'r rhaniad Bootstrap\n"
-"hwn ar gyfer cychwyniad\n"
-"dwbl eich system\n"
+msgid "Colombia"
+msgstr "Colombia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Ffurfweddiad presennol '%s':\n"
"\n"
-"Mwy na thebyd rhaniad Gyrrwr\n"
-"yw'r rhaniad hwn. Gwell gadael\n"
-"llonnydd iddo.\n"
+"Rhwydwaith: %s\n"
+"Cyfeiriad IP: %s\n"
+"Priodweddau IP: %s\n"
+"Gyrrwr: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Enw ffeil cylch-么l: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disg RAID %s\n"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Maint darn %s\n"
+msgid "Details"
+msgstr "Manylion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Cychwyn y rhaniad fel rhagosodwyd\n"
-" (ar gyfer cychwyn MS-DOS, nid ar gyfer lilo)\n"
+msgid "Synchronization tool"
+msgstr "Offeryn Cydamseru"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Ffeil(iau) Cylch-么l:\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Gwirio eich system..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Argraffu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Gosodwyd\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Rhowch y t芒p gyda label cynnwys%s\n"
+"yn yr gyrrwr t芒p %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
+msgid "Mongolia"
+msgstr "Mongolia"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Wedi ei fformatio\n"
+msgid "Mounted\n"
+msgstr "Gosodwyd\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d i silindr %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Rhyngwyneb graffigol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
+msgid "Restore Users"
+msgstr "Adfer Defnyddwyr"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
+msgid "Encryption key for %s"
+msgstr "Allwedd amgryptio ar gyfer %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
+"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
+"porthmap\n"
+"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
+"sy'n\n"
+"gwneud defnydd o fecanwaith RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Enw :"
+msgid "Detected hardware"
+msgstr "Caledwedd canfyddwyd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren gyrrwr DOS: %s (dim ond dyfalu)\n"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Mae rhaniad %s yn cael ei alw'n %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burma)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Tynnu %s"
+msgid "Enabling swap partition %s"
+msgstr "Galluogi rhaniad cyfnewid %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Cop茂o %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Nid oes rhaniadau FAT i'w defnyddio fel cylch-么l (neu nad oes digon o le ar "
+"么l)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
+msgid "Armenian (old)"
+msgstr "Armenaidd (hen)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Cuddio ffeiliau"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
+"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
+"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
+"Mae modd i chi osod enw newydd arno neu ei hepgor."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
+"Dewch o hyd i ateb eich anhawsterau drwy blatfform cefnogaeth ar-lein "
+"MandrakeSoft."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi aillgychwyn cyn i'r newidiadau ddod i rym"
+msgid ", host \"%s\", port %s"
+msgstr ", gwesteiwr \"%s\", porth %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad gyrrwr %s yn mynd i gael ei ysgrifennu i'r ddisg!"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Rhaid cael pecyn %s. Ydych chi am ei osod?"
+msgid "%s formatting of %s failed"
+msgstr "methodd fformatio %s o %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Pa fath o raniad ?"
+msgid "Partitioning failed: %s"
+msgstr "Methodd rhannu: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus."
+msgid "Canada (cable)"
+msgstr "Canada (cabl)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "maint darn"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Diweddaru %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "lefel"
+msgid "Workstation"
+msgstr "Man Gwaith"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "dyfais"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Gosod pecyn %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Amrywiol"
+msgid "Kyrgyzstan"
+msgstr "Kyrgyzstan"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "Dewisiadau gosod"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Gyda dogfennaethelfennol (argymhellir!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron trefnydd gorchymyn cyfnodol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
-"Mae'r ffeil yn cael ei ddefnyddio eisoes gam gylch-么l arall, dewiswch un "
-"arall"
+"Rhaid bod gennych raniad gwraidd.\n"
+"Cr毛wch raniad (neu glicio ar un presennol)\n"
+"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Rhowch enw ffeil"
+msgid "Proxy should be http://..."
+msgstr "Dylai dirprwyon fod yn gyfanrif!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Math o system ffeilio"
+msgid "South Africa"
+msgstr "De Affrica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
+msgid "Western Sahara"
+msgstr "Western Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Enw ffeil cylch-么l"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Cylch-么l"
+msgid "Modify printer configuration"
+msgstr "Newid ffurfweddiad yr argraffydd"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-么l"
+msgid "Choose a partition"
+msgstr "Dewiswch raniad"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "Enw LVM"
+msgid "Edit current rule"
+msgstr "Golygu'r rheol bresennol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "newydd"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Dewis LVM presennol i ychwanegu ato"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Ymresymiadau: arg)\n"
+"\n"
+"Galluogi?Analluogi mewngofnodi pecynnau anarferol IPv4."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Dewis RAID presennol i ychwanegu ato"
+msgid "Please test the mouse"
+msgstr "Profwch y llygoden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Yn symud rhaniad.."
+msgid "Other Media"
+msgstr "Cyfrwng Arall"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Symud"
+msgid "Backup system files"
+msgstr "Ffeiliau System Cadw wrth Gefn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Pa sector hoffech chi symud ato?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Symud"
+msgid "LDAP Base dn"
+msgstr "Sail dn LDAP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Maint mewn MB: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Creu disg meddal awto gosod"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Newid maint"
+msgid "Dialing mode"
+msgstr "Modd deialu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ar 么l newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
-"golli"
+msgid "File sharing"
+msgstr "Rhannu Ffeiliau"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Dylai'r holl ddata ar y rhaniad gael ei gadw wrth gefn"
+msgid "Clean /tmp at each boot"
+msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Nid oes modd newid maint y rhaniad"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Cyfrifo ffiniau system ffeiliau FAT"
+msgid "Please choose your type of mouse."
+msgstr "Dewiswch math eich llygoden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Lle'r ydych am osod %s?"
+msgid "class of hardware device"
+msgstr "dosbarth y dyfais caledwedd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Methu dadsetio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
-"gyfer cylch-么l\n"
-"Tynnu'r cylch-么l yn gyntaf"
+"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r argraffydd(ion) lleol fod ar "
+"gael:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Lle'r ydych am osod dyfais %s?"
+msgid "United Kingdom"
+msgstr "Y Deyrnas Unedig"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Lle'r hoffech chi osod y ffeil cylch-ol %s?"
+msgid "running"
+msgstr "rhedeg"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Newid o ext2 i ext3"
+msgid "default"
+msgstr "rhagosodedig"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o system ffeil ydych chi eisiau?"
+msgid "Indonesia"
+msgstr "Indonesia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
+msgid "France [SECAM]"
+msgstr "Ffrainc(SECAM)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "cyfyngu"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "rhaid cael"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Wedi newid math raniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
+"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
+"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Tynnu'r ffeil cylch-么l?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Llinell orchymyn"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Nid oes modd i chi greu rhaniad newydd\n"
-"(gan eich bod wedi cyrraedd y nifer uchaf o raniadau cynradd).\n"
-"Diddymwch raniad cynradd a chreu rhaniad estynedig."
+"Mae amrediad eang o ddarpariaeth Linux, yn ogystal 芒 chynigion arbennig ar "
+"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Dewis"
+msgid "access to administrative files"
+msgstr "mynediad i ffeiliau gweinyddol"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Gwall wrth ddefnyddio sendmail\n"
+" chafodd eich adroddiad e-bost mo'i anfon\n"
+" Ffurfweddwch eich sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", dyfais amlbwrpas ar borth paralel \\#\"%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Defnyddiwch ar gyfer cylchol"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Ymresymiadau: (val)\n"
+"\n"
+"Gosod amser allan y gragen. Gwerth sero'n golygu dim amser allan."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Newid RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Tynnu o LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Tynnu o RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Ychwanegu i LVM"
+msgid "Connecting to the Internet "
+msgstr "Cysylltu 芒'r Rhyngrwyd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Ychwanegu i RAID"
+msgid "Restore Other"
+msgstr "Adfer Arall"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Fformatio"
+msgid "TV card"
+msgstr "Cerdyn Teledu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Gwybodaeth fanwl"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Yn ceisiio achub y tabl rhaniadau"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Rhowch ddisg meddal yn y gyrrwr\n"
-"Mi fydd yr holl wybodaeth ar y disg meddal yma yn cael ei golli"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Rhybudd"
+"Ymresymiadau: (umask)\n"
+"\n"
+"Gosod gwraidd umask."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Dewiswch ffeil"
+msgid "Remove selected host/network"
+msgstr "Tynnu'r gwesteiwr/rhwydwaith"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Nid yw'r tabl rhaniad wrth gefn yr un maint\n"
-"Parhau?"
+"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
+"peiriant i'r llall."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Cyfrwng symudadwy'n awto-osod"
+msgid "Disconnection from the Internet failed."
+msgstr "Methodd datgysylltu o'r Rhyngrwyd."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Ail-lwytho'r tabl rhaniad"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Yma medrwch ddewis yr bysell neu gyfuniad o fysellau fydd yn\n"
+"caniat谩u newid rhwng bysellfyrddau gwahanol (e.e.: lladin neu\n"
+"arall)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
+msgid "Network Hotplugging"
+msgstr "Plygiobyw'rRhwydwaith"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Adfer y tabl rhaniad"
+msgid "if set to yes, reports check result to tty."
+msgstr "os wedi ei osod i iawn, adrodd adroddiadau gwirio i tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Cadw'r tabl rhaniad"
+msgid "Restore From CD"
+msgstr "Adfer o'r CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dil毛wch un i greu rhaniad estynedig"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei gysylltiad Rhyngrwyd\n"
+"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
+"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
+"\n"
+"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
+"gyda drakconnect cyn mynd ymhellach.\n"
+"\n"
+"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
+"(LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Does dim modd ychwanegu raniadau ychwanegol"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu 芒'r Rhyngrwyd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Mynediad i gerdyn cof ffoto ar eich dyfais HP amlbwrpas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Gwybodaeth am y ddisg caled"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Cewch well perfformiad eich cyfrifiadur gyda chymorth dewis o gwmniau sy'n "
+"cynnig atebion proffesiynnol sy'n cydweddu 芒 Mandrake Linux "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Awto ddynodi"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Mae Rhannu Cysylltiad 芒'r Rhyngrwyd wedi ei analluogi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Clirio i gyd"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "os wedi ei osod i iawn, gwirio checksum y ffeiliau suid/sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
+msgid "Latin American"
+msgstr "Lladin America"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu'r tabl rhaniadau?"
+msgid "Japanese text printing mode"
+msgstr "Modd argraffu testun Siapanae毛g"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Gorffen heb gadw"
+msgid "Old device file"
+msgstr "Hen ffeil dyfais"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Parhau beth bynnag?"
+msgid "Info: "
+msgstr "Gwybodaeth:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbennigwr"
+msgid "Button `%s': %s"
+msgstr "Botwm '%s'.%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Arbennigwr > Cyffredinol"
+msgid "Please wait"
+msgstr "Arhoswch"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Dadwneud"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Gadael"
+msgid "None"
+msgstr "Dim"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Dewiswch raniad"
+msgid "The entered IP is not correct.\n"
+msgstr "Nid yw'r IP'n gywir.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Dewiswch raniad arall"
+msgid "Ethernet Card"
+msgstr "Cerdyn Ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Newid y math"
+msgid "Info"
+msgstr "Gwybodaeth"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Chwiliwch am wasanaethwyr"
+msgid "Install"
+msgstr "Gosodiad"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Parth"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n "
+"bresennol\n"
+"ar y disg. Byddwch ofalus, wedi i chi glicio \"Iawn ->\" ni fydd modd i chi\n"
+"adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys\n"
+"data Windows.\n"
+"\n"
+"Cliciwch \" <- Blaenorol\" i atal y weithred hon heb golli unrhyw ddata\n"
+"a rhaniadau sy'n bresennol ar y ddisg galed."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Enw defnyddiwr"
+msgid "Exit install"
+msgstr "Gorffen"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Rhowch eich enw defnyddiwr, cyfrinair ac enw parth i gael mynediad i'r "
-"gwesteiwr."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Angen Dilysu Parth"
+"Mae popeth wedi ei ffurfweddu\n"
+"Gallwch rannu cysylltiad 芒'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
+"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Another one"
-msgstr "Un arall"
+msgid "Remote CUPS server"
+msgstr "Gwasanaethwr CUPS pell"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which username"
-msgstr "Pa enw defnyddiwr"
+msgid "Sun - Mouse"
+msgstr "Llygoden - Sun"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"Methu mewngofnodi gan ddefnyddio enw defnyddiwr %s (cyfrinair anghywir?)"
+"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
+"\n"
+"%s\n"
+"\n"
+"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Minimal install"
+msgstr "Gosodiad lleiaf"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "Rheolyddion SMBus"
+msgid "Ethiopia"
+msgstr "Ethiopia"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "Rheolyddion USB"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SCSI controllers"
-msgstr "Rheolyddion SCSI"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- dyfeisiau pci: dyma slot PCI, dyfais a gwaith y cerdyn\n"
+"- dyfeisiau ide: mae'r ddyfais un ai yn was neu feistr\n"
+"- dyfeisiau scsi: dynodiad dyfeisiau scsi a'r bws scsi"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Rheolyddion firewire"
+msgid "Total size: %d / %d MB"
+msgstr "Cyfanswm maint: %d/%d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Rheolyddion (E)IDE/ATA"
+msgid "disabled"
+msgstr "anablwyd"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Joystick"
-msgstr "Ffon hud"
+msgid "Search for new scanners"
+msgstr "Chwilio am sganwyr newydd"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanner"
-msgstr "Sganiwr"
+msgid "Disabling servers..."
+msgstr "Analluogi gwasanaethwyr..."
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Anhysbys/Eraill"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Dewiswch faint o amser\n"
+"fydd rhwng pob cadw wrth gefn"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Rheolyddion pontydd a syatem"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Methu cychwyn mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Cerdyn Ethernet"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
+"\n"
+"\n"
+"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Does\n"
+"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r\n"
+"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
+"\n"
+"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Processors"
-msgstr "Prosesyddion"
+msgid "Network printer (TCP/Socket)"
+msgstr "Argraffydd rhwydwaith (TCP/Soced)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
+msgid "Backup User files..."
+msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "Cerdyn sain"
+msgid "Install system"
+msgstr "Gosod y system"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Dyfeisiau AmlGyfrwng eraill"
+msgid "First DNS Server (optional)"
+msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "Cerdyn Teledu"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Yn lle hynny, rhowch enw dyfais/ffeil ar y ninell mewnbwn"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Videocard"
-msgstr "Cerdyn fideo"
+msgid "dhcpd Config..."
+msgstr "Ffurfweddu dhcpd..."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Tape"
-msgstr "T芒p"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "LILO/grub Installation"
+msgstr "Gosodiad LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "Llosgwyr CD/DVD"
+msgid "Israeli"
+msgstr "Israelaidd"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "load setting"
+msgstr "gosodiad llwyth"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disk"
-msgstr "Disg"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Argraffydd \"%s\" ar wasanaethwr \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Floppy can be removed now"
+msgstr "Mae modd tynnu'r disg meddal nawr"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Floppy"
-msgstr "Disg Meddal"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Gosodiad lleiaf"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Dewis gyrrwr fy hun"
+msgid "Denmark"
+msgstr "Denmarc"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Driver:"
-msgstr "Gyrrwr:"
+msgid "Moving partition..."
+msgstr "Yn symud rhaniad.."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Os ydych yn siwr eich bod yn gwybod pa yrrwr sydd angen ar gyfer eich\n"
-"cerdyn yna dewiswch un o'r rhestr uchod\n"
-"\n"
-"Y gyrrwr presennol ar gyfer eich cerdyn \"%s\" yw \"%s\" "
+msgid "(This) DHCP Server IP"
+msgstr "Gwasanaethwr DHCP IP (Hwn)"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Dewis gyrrwr ar hap"
+msgid "Test of the configuration"
+msgstr "Prawf o'r ffurfweddiad"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Installing %s ..."
+msgstr "Gosod %s..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Prawf gwall sain - rhedeg y gorchmynion canlynol:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" pa yrrwyr i'w defnyddio\n"
-"drwy ragosodiad\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" pa yrrwyr mae'n defnyddio\n"
-"ar hyn o bryd\n"
-"\n"
-"- \"/sbin/lsmod\" gwirio os yw ei yrrwr wedi ei lwytho\n"
-"a'i peidio\n"
+"Os ydych wedi dweud wrth y gosodwr eich bod am ddewis pecynnau'n unigol\n"
+"bydd coeden yn cynnwys yr holl becynnau wedi eu dosbarthu yn 么l grwp ac\n"
+"isgrwp. Wrth bori'r goeden, gallwch ddewis grwp cyfan, isgrwp neu becyn\n"
+"unigol.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" dangos\n"
-"os yw sain a gwasanaethau alsa services sydd wedi eu ffurfweddu yn rhedwg\n"
-"ar initlevel 3\n"
+"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
+"ymddangos ar y dde. \n"
+"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
+"rhan\n"
+"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
+"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
+"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
+"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
+"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
+"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
+"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
+"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
+"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
"\n"
-"- \"aumix -q\" a yw'r sain wedi ei ddistewi a'i peidio\n"
+"Mae'r dewis \"Dibyniaethau Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
+"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
+"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
+"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" pa rhaglen sy'n defnyddio'r cerdyn sain.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Datrys problemau sain"
+"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniat谩u llwytho'r\n"
+"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
+"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal gr毛wyd ar\n"
+"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
+"greu disg meddal o'r fath."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Gwall. Nid yw gyrrwr \"%s\" wedi ei restru"
+msgid "Choose your filesystem encryption key"
+msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Gyrrwr anhysbys"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Dewiswch eich dyfais CD/DVD\n"
+"(Gwasgwch Enter i drosglwyddo'r gosodiadau i feysydd eraill.\n"
+"Nid yw'r maes hwn yn angenrheidiol, dim ond offeryn i lanw'r ffurflen.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nid oes gyrrwr hysbys ar gyfer eich cerdyn sain (%s)"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Dim gyrrwr hysbys"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nid oes gyrrwr rhydd ar gyfer eich cerdyn sain (%s) ond mae yrrwr perchnogol "
-"yn \"%s\" ."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Dim gyrrwr cod agored"
+msgid "(default value: %s)"
+msgstr "(gwerth rhagosodedig: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Arhoswch...Gosod y ffurfweddiad"
+msgid "Alternative test page (Letter)"
+msgstr "Prawf tudalen arall (Llythyr)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Mae'r hen yrrwr \"%s\" wedi ei wahardd.\n"
+"Ffurfweddiad Gwasanaethwr DHCP\n"
"\n"
-"Mae'n effeithio'n andwyol ar y cnewyllyn\n"
+"Mae modd dewis dewisiadau gwahanol ar gyfer ffurfweddiad DHCP.\n"
+"Os nad ydych yn gwybod ystyr y dewis, gadewch lonydd iddo.\n"
"\n"
-"Bydd y gyrrwr \"%s|\"'n cael ei ddefnyddio ar y cychwyn"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Datrys problemau"
+msgid "Choose an X server"
+msgstr "Dewiswch wasanaethwr X"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Maint rhaniad cyfnewid mewn MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) oedd yr API sain cyntaf. Mae'n API sail annibynnol o "
-"systemau gweithredu ( mae ar gael ar gyfer y rhan fwyaf o systemau unices) "
-"on mae'n API elfennol iawn a chyfyng.\n"
-"Mae gyrwyr OSS hefyd yn ail ddyfeisio'r hyn sy'n bod eisoes.\n"
-"\n"
-"Mae ALSA (Advanced Linux Sound Architecture) yn bensaerniaeth fodiwlaidd "
-"sy'n \n"
-"cynnal ystod eang o gardiau ISA, USB a PCI.\n"
-"\n"
-"Mae hefyd yn darparu API llawer uwch na OSS.\n"
-"\n"
-"I ddefnyddio alsa, mae modd defnyddio un ai:\n"
-"- hen api OSS cydweddus\n"
-"-api ALSA newydd sy'n darparu llawer o nodweddion gell ond sydd angen "
-"defnyddio llyfrgell ALSA.\n"
+"Allweddi eraill (nid drakbackup)\n"
+"yn eu lle yn barod"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Dim newid i'r ffeil wrth gefn"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Wedi ei fformatio\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Math o osodiad"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Mae eich cerdyn yn defnyddio'r gyrrwr %s\"%s\" ar hyn o bryd ( y gyrrwr "
-"arferol ar ei gyfer yw \"%s\")"
+"- Daemon (%s) i gynnwys :\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d rhifau gwahanwyd gan gollnod"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Yma medrwch ddewis gyrrwr arall (un ai OSS neu ALSA) ar gyfer eich cerdyn "
-"sain (%s)"
+"Mae protocol ruser yn caniat谩u i ddefnyddwyr ar rwydwaith i adnabod\n"
+"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Furfweddiad sain"
+msgid "Automatic Steps Configuration"
+msgstr "FFurfweddiad Camau Awtomatig"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Nid oes gyrrwr OSS/ALSA arall hysbys ar gyfer eich cerdyn sain (%s) sy'n "
-"defnyddio \"%s\" ar hyn o bryd"
+"Hoffech chi wybod mwy am y gymuned Cod Agored? Ymunwch 芒 byd Meddalwedd "
+"Rhydd!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Dim gyrwyr eraill"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "galluogi cynnal radio"
+msgid "Please select data to backup..."
+msgstr "Dewiswch y data i'w gadw wrth gefn..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Cynnal radio:"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"Methodd y cysylltiad.\n"
+"Gwiriwch eich ffurfweddiad yng Nghanolfan Rheoli Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "Gosodiad PLL:"
+msgid "received"
+msgstr "derbyniwyd"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nifer o fyffers cipio ar gyfer cipio mmap"
+msgid "/File/_New"
+msgstr "/Ffeil/_Newydd"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nifer o fyffers cipio:"
+msgid "The DNS Server IP"
+msgstr "Y Gwasanaethwr DHCP IP"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Math o diwniwr"
+msgid "IP Range End:"
+msgstr "Diwedd Amrediad IP:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Model cerdyn:"
+msgid "High"
+msgstr "Uchel"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Ar gyfer y rhelyw o gardiau Teledu diweddar, mae modiwl bttv cnewyllyn GNU/"
-"Linux yn awto ganfod y paramedrau cywir.\n"
-"Os yw'ch cerdyn yn cael ei ganfod ar gam, mae modd gorfodi'r mathau cywir o "
-"gerdyn a rheolydd. Dewiswch baramedrau eich cerdyn teledu os oes raid"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Mae'r maes yn disgrifio'r ddyfais"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Anhysbys|Generig"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org/GIMP"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Anhysbys|CPH06X (bt878) [nifer o werthwyr]"
+msgid "Local Printers"
+msgstr "Argraffyddion Lleol"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Anhysbys|CPH05X (bt878) [nifer o werthwyr]"
+msgid "Installation image directory"
+msgstr "Cyfeiriadur delwedd gosod"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Awtoganfod"
+msgid "NIS Server"
+msgstr "Gwasanaethwr NIS"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Gwneud"
+msgid "Port: %s"
+msgstr "Porth: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Eich dewis? (rhagosodedig %s)"
+msgid "Spain"
+msgstr "Sbaen"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Dewis gwael, ceisiwch eto\n"
+msgid "This user name has already been added"
+msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Ail-gyflwyno"
+msgid "Choose a file"
+msgstr "Dewis ffeil"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=>Hysbysiad, mae label wedi newid:\n"
-"%s"
+msgid "Apply"
+msgstr "Gosod"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
-"neu wasgwch Enter i barhau.\n"
-"Eich dewis?"
+msgid "Auto-detect available ports"
+msgstr "Awtoganfod pyrth ar gael"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Mae yna lawer i ddewis o (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Eich dewis? (rhagosodedig `%s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "rhowch'gwag' am gofnod gwag"
+msgid "Belgium"
+msgstr "Gwlad Belg"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Botwm '%s'.%s"
+msgid "Choose the window manager to run:"
+msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Is gynnyrch y cpu"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Eich dewis? (0/1, rhagosodedig %s)"
+msgid "First Time Wizard"
+msgstr "Dewin Tro Cyntaf"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Gwybodaeth i'w gyflawyno:\n"
-"%s"
+"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
+"Mae'n beryglus i barhau."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Methodd llwytho modiwl %s\n"
-"Hoffech chi drio eto gyda pharamedrau eraill?"
+msgid "please wait, parsing file: %s"
+msgstr "arhoswch, dosbarthu ffeil: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Enwi dewisiadau"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Atoholi"
+msgid "Pakistan"
+msgstr "Pacistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
-"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
-"dewisiadau\n"
-"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
-"wybodaeth mae\n"
-"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
-"unrhyw\n"
-"ddifrod."
+"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
+"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
+"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
+"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
+"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
+"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
+"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
+"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
+"gosodiadau aliniad y pen gyda'r rhaglen."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pa yrrwr %s ddylwn drio?"
+msgid "Permissions"
+msgstr "Caniatadau"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Dewisiadau modiwl:"
+msgid "Provider name (ex provider.net)"
+msgstr "Enw darparwr (eng. darparwr.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Medrwch nawr ei ddewis i fodiwl. %s.\n"
-"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
-"e.e, ``io=0x300 irq=7''"
+msgid "Version: %s\n"
+msgstr "Fersiwn: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
-"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x, e.e. "
-"'0x123'"
+"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
+"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
+"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
+"'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modiwl %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Defnyddiwch raniad Windows ar gyfer cylch-么l"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Gosod gyrrwr %s ar gyfer cerdyn %s "
+msgid "Armenian (typewriter)"
+msgstr "Armenaidd (teipiadur)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Gweler gwybodaeth am galedwedd"
+msgid "Connection type: "
+msgstr "Math o gyswllt:"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Oes gennych unrhyw rhyngwyneb %s?"
+msgid "Graphical interface"
+msgstr "Rhyngwyneb graffigol"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Oes gennych un arall?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s gyda cyflymu caledwedd 3D"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Wedi canfod rhyngwynebau %s %s"
+msgid "India"
+msgstr "India"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Mae modd i chi ffurfweddu pob paramedr o'r modiwl yma"
+msgid "Chad"
+msgstr "Chad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "llinellau collnod ranedig"
+msgid "Slovakia"
+msgstr "Slofacia"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "rhifau gwahanwyd gan gollnod"
+msgid "Singapore"
+msgstr "Singapore"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d llinellau gwahanwyd gan gollnod"
+msgid "Cambodia"
+msgstr "Cambodia"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d rhifau gwahanwyd gan gollnod"
+msgid "Monitor HorizSync: %s\n"
+msgstr "HorizSync Monitor: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "rhif"
+msgid "Path"
+msgstr "Llwybr"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Rahaid cael minicode Alcatel.\n"
-"Llwytho i lawr o\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"achopio'r mgmt.o i /usr/share/speedtouch"
+"Yma medrwch bennu unrhyw fan lle dylid cyfeirio'r gwaith yn lle ei anfon at "
+"yr argraffydd."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Y ffordd mwyaf cyffredin i gysylltu 芒 adsl yw pppoe\n"
-"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
-"Os nad ydych yn gwybod pa un, dewiswch 'pppoe'."
+"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
+"cael ei gychwyn.\n"
+"\n"
+"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
+"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
+"ymosodiadau.\n"
+"\n"
+"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Cysylltu 芒'r We"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Argraffydd %s\n"
+"Beth ydych am ei newid ar yr argraffydd hwn?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "USB Sagem (defnyddio pppoa)"
+msgid "Add host"
+msgstr "Ychwanegu gwesteiwr"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "usb Alcatel Speedtouch"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Os ydych yn siwr eich bod yn gwybod pa yrrwr sydd angen ar gyfer eich\n"
+"cerdyn yna dewiswch un o'r rhestr uchod\n"
+"\n"
+"Y gyrrwr presennol ar gyfer eich cerdyn \"%s\" yw \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "defnyddiwch dhccp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Hoffech chi ganiat谩u i rai defnyddwyr rannu eu cyfeiriaduron?\n"
+"Bydd caniat谩u hyn yn gadael i ddefnyddwyr glicio ar \"Rhannu\" yn konqueror "
+"a nautilus.\n"
+"\n"
+"\"Addasu\" caniat谩u cyfran i'r defnyddwyr.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "defnyddiwch pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
+"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "defnyddiwch pppoe"
+msgid "China (broadcast)"
+msgstr "Tseina (darlledu)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Pyrth eraill"
+msgid "Use quota for backup files."
+msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Popeth (dim mur cadarn)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Ffurfweddu argraffydd \"%s\" ..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Porth annilys wedi ei gynnig: %s.\n"
-"Y fformat cywir yw \"port/tcp\" neu \"port/udp\", \n"
-"lle mae porth rhwng 1 a 65535."
+msgid "Internet connection"
+msgstr "Cysylltiad 芒'r Rhyngrwyd"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Medrwch roi amrywiol byrth.\n"
-"Eng. dilys: 139/tcp 139/udp.\n"
-"Am wybodaeth ewch i /etc/services."
+"Methodd llwytho modiwl %s\n"
+"Hoffech chi drio eto gyda pharamedrau eraill?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Pa wasanaethau'r hoffech i'r Rhyngrwyd gysylltu 芒 hwy?"
+msgid "Welcome to the Open Source world."
+msgstr "Croeso i fyd Cod Agored"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Ffurfweddwr Drakfirewall\n"
-"\n"
-"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad\n"
-"Rhwydwaith/Rhyngrwyd gyda Drakconnect cyn mynd ymhellach."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia ac Herzegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"ffurfweddiadur drakfirewall\n"
-"\n"
-"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
-"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
-"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
+"Mae angen gwir system ffeilio (ext2, reiserfs, xfs, neu jfs)) ar gyfer y "
+"pwynt gosod\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Dim cerdyn rhwydwaith"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Rhowch enw'r gwesteiwr neu'r cyfeiriad IP.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Gwasanaethwr POP ac IMAP"
+msgid "Netherlands"
+msgstr "Yr Iseldiroedd"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Anfon ffeiliau..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Gwasanaethwr E-bost"
+msgid "Internal ISDN card"
+msgstr "Cerdyn ISDN mewnol"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Gwasanaethwr Enw Parth"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Nid oes gyrrwr OSS/ALSA arall hysbys ar gyfer eich cerdyn sain (%s) sy'n "
+"defnyddio \"%s\" ar hyn o bryd"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Gwasanaethwr Gwe"
+msgid "Title"
+msgstr "Teitl"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Rhaid i enw gwesteiwr Zeroconf beidio cynnwys ."
+msgid "Install & convert Fonts"
+msgstr "Gosod a throsi ffontiau"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Enw gwesteiwr"
+msgid "WARNING"
+msgstr "RHYBUDD"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Enw Gwesteiwr Zeroconf"
+msgid "Installing bootloader"
+msgstr "Gosod cychwynnydd"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Rhowch enw gwesteiwr Zeroconf heb ddot os nad ydych\n"
-"am ddefnyddio'r enw gwesteiwr rhagosodedig."
+msgid "replay"
+msgstr "ail chwarae"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Ffurfweddu'r rhwydwaith"
+msgid "detected %s"
+msgstr "canfyddwyd %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu 芒'r Rhyngrwyd"
+msgid "Virgin Islands (U.S.)"
+msgstr "Virgin Islands (U.S.)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Dewiswch rhag wyneb y rhwydwaith"
+msgid "Bad backup file"
+msgstr "Ffeil wrth gefn gwallus"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
-"Nid wyf yn medru gosod y math yma o gysylltiad."
+"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
+"Mae wedi ei analluogi. \n"
+"\n"
+"Beth hoffech ei wneud?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
-"dhcp-client yw'r rhagosodedig"
+"Rhowch gyfeiriad IP a porth gwesteiwr yr argraffydd rydych am ei ddefnyddio."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgr卯n nesaf."
+msgid "Pipe into command"
+msgstr "Peipio i orchymyn"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
-"cerdyn PCI ar y sgr卯n nesaf."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Pa un o'r canlynol yw eich cerdyn IDSN?"
+"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
+"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Ffurfweddiad ISDN"
+msgid "Detecting devices..."
+msgstr "Canfod dyfeisiau..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Peidio"
+msgid "Click here to launch the wizard ->"
+msgstr "Cliciwch yma i gychwyn y dewin ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Parhau"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Disgrifiad y meysydd:\n"
"\n"
-"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgr卯n nesaf fod yn gywir.\n"
-"\n"
-"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Dim syniad"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "enw'r prosesydd"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Adnewyddu data'r argraffydd..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Pa fath o gerdyn sydd gennych?"
+msgid "You must also format %s"
+msgstr "Rhaid fformatio %s hefyd"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Wedi canfod rhyngwyneb \"%s\", hoffech chi ei ddefnyddio?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
+msgid "Insert a floppy containing package selection"
+msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocol ar gyfer gweddill y byd"
+msgid "Server: "
+msgstr "Gwasanaethwr:"
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocol ar gyfer gweddill y byd\n"
-" dim D-Channel (llinell les)"
+msgid "Security Alerts:"
+msgstr "Rhybuddion Diogelwch:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Protocol Ewropeaidd"
+msgid "Sweden"
+msgstr "Sweden"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocol Ewropeaidd (EDSSI)"
+msgid "Use Expect for SSH"
+msgstr "Defnyddiwch Expect ar gyfer SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Dewiswch eich darparwr.\n"
-"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
+msgid "Poland"
+msgstr "Gwlad Pwyl"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Modem IDSN Allanol"
+msgid "Importance: %s\n"
+msgstr "Pwysigrwydd: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Cerdyn ISDN mewnol"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Gwiriwch os ydych am dynnu eich t芒p ar 么l y cadw wrth gefn."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Pa fath o gysylltiad IDSN?"
+msgid "Other ports"
+msgstr "Pyrth eraill"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Rhwydwaith"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "nifer o fyffers cipio ar gyfer cipio mmap"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Hen ffurfweddiad (isdn4net)"
+msgid "SMBus controllers"
+msgstr "Rheolyddion SMBus"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Ffurfweddiad newydd (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Pa ffurfweddiad IDSN sy'n well gennych?\n"
-"\n"
-"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
-" cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
-"yw'n safonol. \n"
-"\n"
-" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
-" ond mae ganddo llai o offer.\n"
-"\n"
-"Rydym yn argymell y ffurfweddiad ysgafn.\n"
+"Nid yw rhai prosesyddion i486DX-100 cynnar yn medru dychwelyd i'w cyflwr "
+"gweithredu a'r o么 defnyddio \"halt\""
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Gwneud dim"
+msgid "Croatian"
+msgstr "Croataidd"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Defnyddiwch y rhaniadau cyfredol"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Gosod rpm"
+msgid "Unable to contact mirror %s"
+msgstr "Methu canfod drych: %s."
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"Wedi canfod winmodem \"%s\" , hoffech chi osod y feddalwedd angenrheidiol?"
+msgid "/Help/_About..."
+msgstr "/Cymorth/_Ynghylch..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Title"
-msgstr "Teitl"
+msgid "Remove user directories before restore."
+msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Nid yw'r system yn cynnal eich modem.\n"
-"Ewch i http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Ail Wasanaethwr DNS (dewisol)"
+"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
+"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
+"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
+"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
+msgid "CUPS printer configuration"
+msgstr "Ffurfweddiad argraffydd CUPS "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Enw parth"
+msgid "could not find any font in your mounted partitions"
+msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "Gwall F00f"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Seiliedig ar sgript"
+msgid "XFree %s"
+msgstr "XFree: %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Seiliedig ar derfynnell"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
+"dhcp-client yw'r rhagosodedig"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Enw Parth:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Dynodiad Mewngofnodi"
+msgid "On Floppy"
+msgstr "Ar Ddisg Meddal"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Rhif ff么n"
+msgid "Restore"
+msgstr "Adfer"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Enw'r cysylltiad"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"os wedi ei osod i iawn, gwirio os yw'r dyfeisiau rhwydwaith mewn modd cymysg"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Dewisiadau cyswllt ff么n"
+msgid "Looking for available packages..."
+msgstr "Chwilio am y pecynnau sydd ar gael"
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
+msgid "Init Message"
+msgstr "Neges Init"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith"
+msgid "Rescue partition table"
+msgstr "Achub y tabl rhaniadau"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
-"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
-"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
+msgid "Connection complete."
+msgstr "Cysylltiad wedi ei gwblhau"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
-"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
-"."
+msgid "Cyprus"
+msgstr "Cyprus"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
-"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
-"\n"
+msgid "Remove from RAID"
+msgstr "Tynnu o RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
-"\n"
-"%s"
+"Mae'r allwedd amgryptio'n rhy syml (mae'n rhaid bod o leiaf %d nod o hyd)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Rhaid i'r rhwydwaith gael ei ailgychwyn. Ydych chi am ei ailgychwyn?"
+msgid "Configuration Wizards"
+msgstr "Dewin Ffurfweddu"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Ffurfweddiad y rhwydwaith"
+msgid "ISDN connection"
+msgstr "Cysylltiad ISDN"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
+msgid "primary"
+msgstr "cynradd"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Cysylltiad 芒'r Rhyngrwyd"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "ar wasanaethwr SMB/Windows \"%s\", rhannu \"%s\""
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu 芒'r Rhyngrwyd.\n"
-"Dewiswch ba un rydych am ei ddefnyddio.\n"
+"Dewiswch pa wasanaethau rydych am eu cael wrth gychwyn eich cyfrifiadur.\n"
+"\n"
+"Bydd DrakX yn rhestri'r holl wasanaethau sydd ar gael gyda'r gosodiad "
+"cyfredol.\n"
+"Darllenwch y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob "
+"tro\n"
+"wrth gychwyn.\n"
"\n"
+"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
+"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
+"rhagosodedig\n"
+"\n"
+"!!Byddwch yn ofalus iawn os ydych am ddefnyddio eich peiriant fel "
+"gwasanaethwr:\n"
+"mwy na thebyg na fyddwch eisiau cychwyn unrhyw wasanaethau nad oes eu\n"
+"hangen. Cofiwch fod cael nifer o wasanaethau wedi eu galluogi ar y "
+"gwasanaethwr,\n"
+"fod yn beryglus. Yn gyffredinol, dim ond dewis y gwasanaethau mae'n rhaid eu "
+"cael.\n"
+"!!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
+msgid "Skip"
+msgstr "Hepgor"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "cerdyn ethernet wedi ei ganfod"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "cysylltiad LAN"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
+"ffurfweddu i gychwyn wrth gychwyn y peiriant."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "canfyddwyd cysylltiad cebl"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr "Amledd y cpu mewn MHz (y nifer o gyfarwyddiadau'r eiliad)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Cysylltiad cebl"
+msgid "important"
+msgstr "pwysig"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "canfuwyd"
+msgid "Total Progress"
+msgstr "Cyfanswm Cynydd"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ADSL connection"
-msgstr "Cysylltiad ADSL"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"Bydd DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
+"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn\n"
+"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
+"\n"
+"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd,\n"
+"gall DrakX fethu canfod eich dsgiau caled. Os felly, bydd rhaid i chi bennu\n"
+"eich caledwedd 芒 llaw.\n"
+"Os ydych wedi pennu eich addaswr PCI SCS gyda llaw, bydd DrakX yn\n"
+"gofyn i chi ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX "
+"ofyn\n"
+"i'r cerdyn am ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu\n"
+"cychwyn. Mae hyn fel rheol yn gweithio'n dda\n"
+"\n"
+"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
+" chi ffurfweddu'r gyrrwr gyda llaw. "
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "canfyddwyd %s"
+msgid "Users"
+msgstr "Defnyddwyr"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Cysylltiad ISDN"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Cysylltiad Winmodem l"
+msgid "Preparing bootloader..."
+msgstr "Paratoi cychwynnydd"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "canfyddwyd ar borth %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Mynedfa (e.e. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Cysylltiad modem arferol"
+msgid "The passwords do not match"
+msgstr "Nid yw'r cyfrineiriau'n cydfynd"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Canfod dyfeisiau..."
+msgid "Examples for correct IPs:\n"
+msgstr "Esiamplau cywir ar gyfer IP:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Modd Uwch"
+msgid "Frequency (MHz)"
+msgstr "Amledd (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Defnyddio awto ganfod"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
+"``linux defcfg=floppy''"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Dewiswch broffil i'w ffurfweddu"
+msgid "the number of the processor"
+msgstr "rhif y prosesydd"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
-"\n"
-"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
-"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Cloc caledwedd wedi ei osod i GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
-"ffurfweddu\n"
-"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
-"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
+msgid "Give a file name"
+msgstr "Rhowch enw ffeil"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
-"\n"
-"\n"
-"Pwyswch Iawn i barhau."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Rydym am ffurfweddu cysylltiad %s"
+msgid "Change Cd-Rom"
+msgstr "Newid CD-Rom"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Cysylltiad 芒'r rhyngrwyd a'i ffurfweddiad "
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Ffurfweddu'r gysylltiad"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Nid oes gyrrwr hysbys ar gyfer eich cerdyn sain (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Dadgysylltu"
+msgid "force"
+msgstr "grym"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Cysylltu"
+msgid "Exit"
+msgstr "Gadael"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Medrwch ailffurfweddu eich cysylltiad"
+"NODYN: Yn dibynnu ar yr argraffydd a'r system argraffu bydd hyd at %d MB o "
+"feddalwedd ychwanegol yn cael ei osod."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Medrwch gysylltu 芒'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
+"Nid oes gennych unrhyw rhagwynebau wedi\n"
+"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
+"drwy glicio ar 'Ffurfweddu'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Nid ydych wedi eich cysylltu 芒'r Rhyngrwyd."
+msgid "Estonian"
+msgstr "Estonaidd"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"\n"
-"Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
+"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
+"iwasanaethu ffeiliau HTML a CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Rydych wedi eich cysylltu 芒'r Rhyngrwyd."
+msgid "Add/Del Clients"
+msgstr "Ychwanegu/Dileu Cleientiaid"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Dylai'r URL ddechrau gyda 'ftp' neu 'http:'"
+msgid "Choose the network interface"
+msgstr "Dewiswch rhag wyneb y rhwydwaith"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Dylai dirprwyon fod yn gyfanrif!"
+msgid "Unknown Model"
+msgstr "Model anhysbys"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "Dirprwy FTP"
+msgid "CD/DVD burners"
+msgstr "Llosgwyr CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Dirprwy HTTP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Cychwyn y rhaniad fel rhagosodwyd\n"
+" (ar gyfer cychwyn MS-DOS, nid ar gyfer lilo)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Ffurfweddiad dirprwyon"
+msgid "choose image"
+msgstr "dewis ymyl"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Dylai cyfeiriad Porth fod mewn fformat 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Dylai cyfeiriad DNS fod mewn fformat 1.2.3.4"
+msgid "Connection name"
+msgstr "Enw'r cysylltiad"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Dyfais mynedfa"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"blwch testun cydfesuryn x\n"
+"mewn rhif nodau"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Mynedfa (e.e. %s)"
+msgid "Updating package selection"
+msgstr "Diweddaru'r dewis pecynnau"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Gwasanaethwr DNS"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Lle'r hoffech chi osod y ffeil cylch-ol %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Rhowch eich enw gwesteiwr.\n"
-"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
-"megis \"fymlwch.fynesg.fyngho.com\".\n"
-"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
+"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
+"Medrwch ail chwarae eich gosodiad."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Dylai'r raddfa gael rhagosodiad K, M neu G (e.e.\"11M\" am 11M), neu "
-"ychwanegi '0' (sero)."
+msgid "the number of buttons the mouse has"
+msgstr "nifer y botymau sydd gan y llygoden"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Dylai Frqu gael rhagosodiad k, M neu G (ee \"2.46G\" am donfedd 2.46 GHz ), "
-"neu ychwanegu '0' (sero)."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "dylai cyfeiriad IP fod mewn fformat 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Cychwyn y peiriant"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Rhowch enw'r gwesteiwr o'r cyfeiriad DHCP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Plygiobyw'rRhwydwaith"
+"Rhowch y cyfeiriadur(neu fodiwl) i osod y cadw\n"
+"wrth gefn ar y gwesteiwr hwn."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
+msgid "Replay"
+msgstr "Ail chwarae"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "Enw gwesteiwr DHCP"
+msgid "Backup other files"
+msgstr "Cadw'r ffeiliau eraill wrth gefn"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+msgid "No floppy drive available"
+msgstr "Does dim gyrrwr disg meddal ar gael"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "Cyfeiriad IP"
+msgid "Backup files are corrupted"
+msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Safon Teledu:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP awtomatig"
+msgid "Cpuid family"
+msgstr "Teulu cpuid"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (gyrrwr %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Ffurfweddu dyfais rhwydwaith %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lithuenaidd AZERTY (newydd)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
-"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
-"(e.e.1.2.3.4)."
+"mae iawn yn golygu fod gan y cydbrosesydd fector eithriad yn gysylltiaedig"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu 芒'r "
-"Rhyngrwyd.\n"
-"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
-"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
+"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
+"Nid oes cychwynnydd yn medru trin hwn heb rhaniad /boot\n"
+"Cofiwch ychwanegu rhaniad /boot"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
-"atgyweirio gyda llaw ar 么l y gosodiad."
+msgid "Previous"
+msgstr "Cynt"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
+msgid "Other OS (MacOS...)"
+msgstr "Systemau Gweithredu Eraill (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Cyfrinair y Cyfrif"
+msgid "To activate the mouse,"
+msgstr "I ysgogi'r llygoden,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
+msgid "Bringing up the network"
+msgstr "Cychwyn y rhwydwaith"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Bydd lluniau o'r sgr卯n ar gael ar 么l gosod yn %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Cyflymder y cysylltiad"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
+"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
+"system weithredu Mandrake Linux newydd\n"
+"\n"
+"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
+"\"Maint\".\n"
+"\n"
+"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
+"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
+"\n"
+"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
+"a \"sd\" yw disg caled SCSI.\n"
+"\n"
+"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
+"Gyda disgiau caled IDE:\n"
+"\n"
+" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
+"\n"
+" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
+"\n"
+" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
+"\n"
+" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
+"\n"
+"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
+" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
+"\n"
+"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
+" Windows (\"C:\" yw'r ddisg neu raniad cyntaf)."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Modd deialu"
+msgid "Tanzania"
+msgstr "Tanzania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Dewiswch eich gwlad"
+msgid "Computing FAT filesystem bounds"
+msgstr "Cyfrifo ffiniau system ffeiliau FAT"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 y darparwr (dewisol)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Ffynhonell Cadw wrth Gefn:\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 y darparwr (dewisol)"
+msgid "Content of the file"
+msgstr "Cynnwys y ffeil"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Rhif ff么n y darparwr"
+msgid "Authentication LDAP"
+msgstr "Dilysu LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Enw darparwr (eng. darparwr.net)"
+msgid "Let me pick any driver"
+msgstr "Dewis gyrrwr fy hun"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Eich rhif ff么n personol"
+msgid "Profile "
+msgstr "Proffil"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 y cerdyn"
+msgid "transmitted"
+msgstr "darlledwyd"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_O y cerdyn"
+msgid "Palestine"
+msgstr "Palestinia"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "IO'r Cerdyn"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Cof Cerdyn (DMA)"
+msgid "%d comma separated strings"
+msgstr "%d llinellau gwahanwyd gan gollnod"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ y cerdyn"
+msgid "Here is the full list of keyboards available"
+msgstr "Dyma restr lawn o'r bysellfyrddau ar gael"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Llanwch neu diciwch y maes islaw"
+msgid "Theme name"
+msgstr "Enw Thema"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Ffurfweddiad y Cysylltiad"
+msgid "/_Help"
+msgstr "/_Cymorth"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Nid yw'n ymddangos i'ch system gysylltu 芒'r Rhyngrwyd.\n"
-"Ailffurfweddwch eich cysylltiad."
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
+"Yma medrwch benderfynu a ddylai'r sganwyr sy'n gysylltiedig 芒'r cyfrifiadur "
+"hwn fod ar gael i gyfrifiaduron pell a pha rai."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Mae'r system wedi cysylltu 芒'r Rhyngrwyd."
+msgid "the width of the progress bar"
+msgstr "lled y bar cynnydd"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Profi eich cysylltiad..."
+msgid "Cook Islands"
+msgstr "Cook Islands"
-#: ../../network/tools.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Hoffech chi gysylltu 芒'r Rhyngrwyd nawr?"
+msgid "Formatting partition %s"
+msgstr "Yn fformatio rhaniad %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet configuration"
-msgstr "Ffurfweddiad rhyngrwyd"
+msgid "Hostname required"
+msgstr "Mae angen enw gwesteiwr"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
-"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
-"Nid oes gwerth ysgrifennu i'r ddisg"
+msgid "Unselect fonts installed"
+msgstr "Tynnu ffontiau wedi eu gosod"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid " (Default)"
-msgstr "(Rhagosodedig)"
+msgid "Cancel"
+msgstr "Diddymu"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ar wasanaethwr CUPS \"%s\""
+msgid "Searching for configured scanners ..."
+msgstr "Chwilio am sganiwr wedi ei ffurfweddu..."
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Argraffyddion Pell"
+msgid "Wheel"
+msgstr "Olwyn"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Videocard"
+msgstr "Cerdyn fideo"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(on this machine)"
-msgstr "(ar y peiriant hwn)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on %s)"
-msgstr "(ar %s)"
+msgid "Remove Selected"
+msgstr "Tynnu'r Dewis"
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "/Autodetect _modems"
+msgstr "/Awtoganfod_modem"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Remove printer"
+msgstr "Tynnu argraffydd"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"RHYBUDD!\n"
+"\n"
+"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
+"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
+"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg\n"
+"scandisk yn Windows (ac os oes modd defrag), yna ail\n"
+"gychwyn y gosodiad. Dylech hefyd wneud copi wrth gefn\n"
+"o'ch data.Pan rydych yn siwr, cliciwch Iawn."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Pa wasanaethau'r hoffech i'r Rhyngrwyd gysylltu 芒 hwy?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Croeso i'r gwasanaeth ffurfweddu e-bost\n"
+"\n"
+"Yma bydd modd i chi osod y system rhybuddio.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Other"
+msgstr "Arall"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Default"
+msgstr "Rhagosodedig"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Model anhysbys"
+msgid "Button 2 Emulation"
+msgstr "Efelychiad Botwm 2"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Model anhysbys"
+msgid "type1inst building"
+msgstr "adeiladu math 1inst"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s(Porth %s)"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Host %s"
-msgstr "Gwesteiwr %s"
+msgid "choose image file"
+msgstr "dewis ffeil delwedd"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Rhwydwaith %s"
+msgid "X server"
+msgstr "Gwasanaethwr X"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Rhyngwyneb \"%s\""
+msgid "Domain Admin User Name"
+msgstr "Enw Defnyddiwr Gweinyddiaeth Parth"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Local network(s)"
-msgstr "Rhwydwaith(iau) lleol "
+msgid "There was an error while scanning for TV channels"
+msgstr "Digwyddodd gwall wrth sganio am sianelu teledu"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Argraffydd crai (dim gyrrwr)"
+msgid "US keyboard (international)"
+msgstr "Bysellfwrdd UDA (rhyngwladol)"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", using command %s"
-msgstr ", defnyddio gorchymyn %s"
+msgid "Not installed"
+msgstr "Heb ei osod"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
+msgid "LAN connection"
+msgstr "cysylltiad LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "ar wasanaethwr SMB/Windows \"%s\", rhannu \"%s\""
+msgid "/File/-"
+msgstr "/Ffeil/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", gwesteiwr TCP/IP \"%s\", porth %s"
+msgid "Italian"
+msgstr "Eidalaidd"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr LPD \"%s\", argraffydd \"%s\""
+msgid "Basic"
+msgstr "Elfennol"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", printing to %s"
-msgstr ", argraffu i %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Hawlfraint (C) 2002 MandrakeSoft\n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ",dyfais amlbwrpas"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dyfais amlbwrpas ar HP JetDirect"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dyfais amlbwrpas ar USB"
+msgid "Card IO"
+msgstr "IO'r Cerdyn"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", dyfais amlbwrpas ar borth paralel \\#\"%s"
+msgid "when checked, owner and group won't be changed"
+msgstr "wedi ei dicio, nid fydd y perchennog a'r grwp yn cael ei newid"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", USB printer"
-msgstr "argraffydd USB"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Mae'r rhaniad Bootstrap\n"
+"hwn ar gyfer cychwyniad\n"
+"dwbl eich system\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", argraffydd USB \\#\"%s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
+"fydd gyda llaw"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " ar borth paralel \\#\"%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Medrwch benderfynu a ddylai sganwyr ar gyfrifiadur pell fod ar gael ar gyfer "
+"y cyfrifiadur hwn."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printers"
-msgstr "Argraffyddion Lleol"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Rhwydwaith drwy FTP.\n"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Peipio'r gwaith i orchymyn"
+msgid "Russian (Yawerty)"
+msgstr "Rwsiaidd (Yawerty)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Rhowch URI dyfais argraffydd"
+msgid "You must enter a device or file name!"
+msgstr "Rhaid cynnig enw dyfais neu ffeil!"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Argraffydd ar wasanaethwr NetWare"
+msgid "/_Quit"
+msgstr "/_Gadael"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Rahaid cael minicode Alcatel.\n"
+"Llwytho i lawr o\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"achopio'r mgmt.o i /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Argraffydd rhwydwaith (TCP/Soced)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Cof graffeg: %s kB\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Argraffydd ar wasanaethwr lpd pell"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
+"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
+"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
+"2 neu (yn 么l eich dewis) unrhyw fersiwn diweddarach.\n"
+"\n"
+" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
+" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
+" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
+" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
+" wybodaeth.\n"
+"\n"
+" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
+" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
+"MA 02111-1307, USA\n"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Argraffydd ar wasanaethwr CUPS pell"
+msgid "access to compilation tools"
+msgstr "mynediad i offer crynhoad"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote printer"
-msgstr "Argraffydd pell"
+msgid "Please select data to restore..."
+msgstr "Dewiswch y data i'w adfer..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Argraffydd lleol"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
+"ddigon)\n"
+"ar ddechrau'r ddisg."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Ffurfweddi'u rhaglenni"
+msgid "Standard test page"
+msgstr "Tudalen prawf safonnol"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Create"
+msgstr "Creu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Tynnu argraffydd \"%s\"..."
+msgid "What"
+msgstr "Beth"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
+msgid "There was an error ordering packages:"
+msgstr "Roedd gwall wrth drefnu pecynnau"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Tynnu argraffydd"
+msgid "Bulgarian (BDS)"
+msgstr "Bwlgaraidd (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Gwybod sut i ddefnyddio'r argraffydd"
+msgid "Disable Server"
+msgstr "Analluogi'r Gwasanaethwr"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Argraffu tudalennau prawf"
+msgid "Filesystem encryption key"
+msgstr "Allwedd amgryptio system ffeil : "
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Methwyd 芒 thynnu argraffydd \"%s\" o Star Office/OpenOffice.org/GIMP."
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
-"org."
+"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
+"neu wasgwch Enter i barhau.\n"
+"Eich dewis?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org/GIMP."
+msgid "Save theme"
+msgstr "cadw thema"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "grwp"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org/GIMP."
+msgid "Brazil"
+msgstr "Brazil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
-"OpenOffice.org/GIMP."
+msgid "Auto Install"
+msgstr "Awto Gosod"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org/GIMP"
+msgid "Network Configuration Wizard"
+msgstr "Dewin Ffurfweddu'r Rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org/GIMP"
+msgid "Removable media automounting"
+msgstr "Cyfrwng symudadwy'n awto-osod"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
+msgid "Printing"
+msgstr "Argraffu"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Argraffydd rhagosodedig"
+msgid "Unkown driver"
+msgstr "Gyrrwr anhysbys"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+"Nid oes unrhyw argraffydd wedi ei ganfod wedi ei gysylltu'n uniongyrchol "
+"芒'ch cyfrifiadur"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Dewisiadau argraffydd"
+msgid "Create a new partition"
+msgstr "Creu rhaniad newydd"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Gwneuthurwr yr argraffydd, model"
+msgid "Driver:"
+msgstr "Gyrrwr:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
+msgid "unknown"
+msgstr "anhysbys"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Tynnu hen argraffydd \"%s\"..."
+msgid "Use fdisk"
+msgstr "Defnyddiwch fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
+msgid "MOVE YOUR WHEEL!"
+msgstr "SYMUDWCH YR OLWYN!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer connection type"
-msgstr "Math o gyswllt argraffydd"
+msgid "sent: "
+msgstr "anfonwyd: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Argraffydd bras"
+msgid "Automatic IP"
+msgstr "IP awtomatig"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do it!"
-msgstr "Gwna!!"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
+"yn barod i'w ddefnyddio. Cliciwch \"Nesaf ->\" i ailgychwyn y cyfrifiadur.\n"
+"Mae modd i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd\n"
+"orau gennych (os oes gennych y ddwy system ar eich peiriant), gynted\n"
+"ag y bydd eich peiriant yn ail gychwyn. \n"
+"\n"
+"Mae'r botwm \"Uwch\" yn dangos dau fotwm arall:\n"
+"\n"
+" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
+"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
+"newydd ei ffurfweddu.\n"
+"\n"
+"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
+"\n"
+" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu\n"
+"rhaniad yn cael ei hepgor.\n"
+"\n"
+" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
+"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
+"\n"
+"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o\n"
+"beiriannau tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
+"\n"
+" *\"Cadw'r dewis o becynnau\":(*): mae hyn yn cadw'r dewis o becynnau\n"
+"wnaed cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y\n"
+"gyrrwr a rhedeg y gosodiad gan fynd i'r sgr卯n cymorth drwy wasgu'r fysell\n"
+"[F1], a chyflwyno >>linux defcfg=\"disg meddal\"<<.\n"
+"\n"
+"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn\n"
+"GNU/Linux, teipiwch \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Close"
-msgstr "Cau"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Argraffydd %s\n"
-"Beth ydych am ei newid ar yr argraffydd hwn?"
+msgid "Configuration of a remote printer"
+msgstr "Ffurfweddiad argraffydd pell"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Newid ffurfweddiad yr argraffydd"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add a new printer"
-msgstr "Ychwanegu argraffydd newydd"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Gwiriwch os ydych am ddileu eich t芒p cyn y cadw wrth gefn."
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Normal Mode"
-msgstr "Modd Arferol"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Platfform arlein i ymateb i anghenion cefnogaeth penodol cwmni"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Newidiwch y system argraffu"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Dylai'r URL ddechrau gyda 'ftp' neu 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Furfweddiad CUPS"
+msgid "Add a new rule at the end"
+msgstr "Ychwanegu rheol newydd ar y diwedd"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Arddangos pob argraffydd CUPS pell sydd ar gael"
+"Medrwch benderfynu a ddylai argraffydd ar gyfrifiadur pell fod ar gael ar "
+"gyfer y cyfrifiadur hwn."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
+"Medrwch nawr ei ddewis i fodiwl. %s.\n"
+"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
+"e.e, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "System argraffu."
+msgid "Quit without writing the partition table?"
+msgstr "Gorffen heb ysgrifennu'r tabl rhaniadau?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Gosod Foomatic..."
+msgid "Installing packages..."
+msgstr "Gosod pecynnau..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Methu ffurfweddu argraffydd \"%s\"!"
+msgid "Dutch"
+msgstr "Isalmaenaidd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Ffurfweddu argraffydd \"%s\" ..."
+msgid "The following packages need to be installed:\n"
+msgstr "Mae'r pecynnau canlynol angen eu gosod:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Darllen data argraffydd..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
+msgid "service setting"
+msgstr "gosodiad gwasanaeth"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Dewiswch Sbwlydd Argraffydd"
+msgid "Custom"
+msgstr "Arddull"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Gosod yr Argraffydd Rhagosodedig"
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Mae'r ffeil yn cael ei ddefnyddio eisoes gam gylch-么l arall, dewiswch un "
+"arall"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Gosod %s..."
+msgid "Read-only"
+msgstr "Darllen yn unig"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Tynnu %s..."
+msgid "Latvia"
+msgstr "Latfia"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
-"cael ei gychwyn.\n"
-"\n"
-"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
-"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
-"ymosodiadau.\n"
-"\n"
-"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
+msgid "No known driver"
+msgstr "Dim gyrrwr hysbys"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Os nad hwn yw'r un rydych am ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y "
+"llinell mewnbwn."
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
-"%s. \n"
+"Nid oes Cerdyn Sain wedi ei ganfod ar eich peiriant. Gwriwch fod Cerdyn Sain "
+"sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
"\n"
-"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
-"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
-"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
-"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
"\n"
-"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
+"Cewch ymweld 芒'n cronfa ddata caledwedd yn:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Gosod system argraffu yn lefel diogelwch %s"
+msgid "Configure Local Area Network..."
+msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "Paranoia"
+msgid "Launch the sound system on your machine"
+msgstr "Cychwyn y system sain ar eich peiriant"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "uchel"
+msgid "Preparing printer database..."
+msgstr "Paratoi cronfa ddata argraffydd..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Ailgychwyn system argraffu..."
+msgid "Information"
+msgstr "Gwybodaeth"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Ffurfweddiad argraffydd pell"
+msgid "No network card"
+msgstr "Dim cerdyn rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
-"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
-"argraffydd."
+msgid "Which filesystem do you want?"
+msgstr "Pa fath o system ffeil ydych chi eisiau?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
-"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar 么l cychwyn eich "
-"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
-"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
-"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
-"\"Argraffydd\""
+msgid "3 buttons"
+msgstr "3 botwm"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Ffurfweddwch y rhwydwaith"
+msgid "Detailed information"
+msgstr "Gwybodaeth fanwl"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
-"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
-"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
-"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
+"Gosodiadau rhagosodedig yr argraffydd\n"
+"\n"
+"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
+"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
+"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
+"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
+"sylweddol.."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Cychwyn y rhwydwaith..."
+msgid "This floppy is not FAT formatted"
+msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Adnewyddu data'r argraffydd..."
+msgid "Configuring network"
+msgstr "Ffurfweddu'r rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
-"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
-"s ?"
+msgid "Graphic Card"
+msgstr "Cerdyn Graffeg"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
+msgid "Resizing Windows partition"
+msgstr "Mesur ffiniau system ffeilio Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Trosglwyddo %s..."
+msgid "Provider dns 1 (optional)"
+msgstr "Dns 1 y darparwr (dewisol)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Enw'r argraffydd newydd"
+msgid "Cameroon"
+msgstr "Cameroon"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
-"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
+"Medrwch rannu %s\n"
+"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Trosglwyddo"
+msgid "Close"
+msgstr "Cau"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
-"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
-"Mae modd i chi osod enw newydd arno neu ei hepgor."
+"\"Gwlad\":gwiriwch y dewis gwlad. Os nad ydych yn y wlad hon\n"
+"cliciwch y botwm \"Ffurfweddu\"a dewis un arall. Os nad yw eich\n"
+"gwlad ar y rhestr gyntaf, cliciwch \"Rhagor\" i wdrych ar y rhestr\n"
+"gyflawn."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Peidio trosglwyddo argraffydd"
+msgid "Calendar"
+msgstr "Calendr"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
-"\"Trosglwyddo\"."
+"Adfer Cofnod\n"
+"Catalog Ddewiswyd"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
-"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
+"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
+"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
-"\"foomatic-configure\"."
+msgid "Iceland"
+msgstr "Ynys yr I芒"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
+msgid "consolehelper missing"
+msgstr "consolehelper ar goll"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Mae PDQ yn cynnal argraffyddion lleol, LDP pell, a Socket/TCP, yn unig.\n"
+msgid "stopped"
+msgstr "ataliwyd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
-"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "P'un ai oes gan yr FPU fector irq"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mae modd i chi gop茂o ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
-"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
-"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
-"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
-"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Mae eich argraffydd wedi ei ffurfweddu'n awtomatig i rhoi mynediad i chi i'r "
-"gyrrwr cerdyn llun o'c cyfrifiadur. Mae modd i chi gael mynediad at eich "
-"cardiau llun drwy'r rhaglen graffigol \"MtoolsFM\" (Dewislen: \"Rhaglenni\" -"
-"> \"Offer ffeil\" -> \"Rheolwr Ffeiliau MTools\") neu ar y llinell "
-"orchymyn: \"mtools\" (\"man mtools\" am ragor o wybodaeth) Bydd ys system o "
-"dan yrrwr \"p\", neu lythrennau canlynol pan fydd gennych fwy nag un "
-"argraffydd HP gyda gyrwyr cerdyn llun. Yn MToolsFM\" mae modd newid rhwng "
-"llythrennau gyrwyr drwy'r maes ar ben uchaf de'r rhestr."
+msgid "Expand Tree"
+msgstr "Estyn y goeden"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
-"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
-"wynebau graffigol \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
-"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
-"\"Cipio\". Galwch hefyd \"man scanimage\" ar y linell orchymyn i dderbyn mwy "
-"o wybodaeth.\n"
+"Mae'r hen yrrwr \"%s\" wedi ei wahardd.\n"
"\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Argraffu tudalen(nau) prawf..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Rhestr ddewis argraffu"
+"Mae'n effeithio'n andwyol ar y cnewyllyn\n"
+"\n"
+"Bydd y gyrrwr \"%s|\"'n cael ei ddefnyddio ar y cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Argraffu ar argraffydd \"%s\""
+msgid "Expert Mode"
+msgstr "Modd Uwch"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Argraffu/Mynediad Cardiau Llun ar \"%s\""
+msgid "Printer options"
+msgstr "Dewisiadau argraffydd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Argraffu/Sganio ar \"%s\""
+msgid "Local Network adress"
+msgstr "Cyfeiriad y Rhwydwaith Lleol "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Argraffu/Sganio/Cardiau Llun ar \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"I wybod am y dewisiadau sydd ar gael ar gyfer yr argraffydd, darllenwch un "
-"ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr dewis argraffu\".%s%s%s\n"
+"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu\n"
+"ryddhau ers i'r dosbarthiad fod ar gael.Efallai bod bod gwallau amaterion "
+"diogelwch wedi eu cywiro\n"
"\n"
+"I lwytho'r pecynnau i lawr, bydd angen cyswllt gweithredol\n"
+"芒'r Rhyngrwyd.\n"
+"\n"
+"Ydych chi am osod y diweddariadau?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Gwasanaethwr Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Ymresymiadau: (arg, alert=1)\n"
"\n"
-"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniat谩u newid y gosodiadau dewis "
-"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
-"llinell gorchymyn, e.e \"%s <file>\".\n"
+"Galluogi/Analluogi Amddiffyn spwffio IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
-"a thrin gwaith argraffu.\n"
-"\n"
-"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
-"argyfwng\", eicon ar y bwrdd gwaith, wedi ei labelu \"Atal yr Argraffydd!\", "
-"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
-"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
+msgid "Australian Optus cable TV"
+msgstr "Teledu Cebl Opus Awstralia"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
-"nifer o raglenni. Ond peidiwch 芒 rhoi'r enw ffeil yma oherwydd bod y ffeil "
-"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
+" <Tab>/<Alt-Tab> rhwng elfennau | <Space> yn dewis | <F12> y sgr卯nnesaf "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
-"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
+msgid "Subnet:"
+msgstr "Isnet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
-"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
-"gorchymyn, e.e \"%s <file>\". "
+msgid "Please enter the host name or IP."
+msgstr "Rhowch enw'r gwesteiwr neu'r IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
-"orchymyn \"%s <file>\".\n"
+msgid "When"
+msgstr "Pryd"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Ail Wasanaethwr DNS (dewisol)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Y Ffindir"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
-"presennol:\n"
+"Ymresymiadau: (arg)\n"
"\n"
+"Caniat谩u i bob gwasanaeth sy'n cael ei reoli gan tcp_wrappers os yw \\fIarg"
+"\\fP = ALL. Dim ond rhai lleol\n"
+"os\\fIarg\\fP = LOCAL a dim os \\fIarg\\fP = NONE. I gnaiat谩u'r "
+"gwasanaethausydd angen defnyddiwch /etc/hosts.allow\n"
+"(gw. hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
-"deialogau argraffu mewn nifer o raglenni, ond yma nid ydynt yn darparu'r "
-"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
+msgid "Color depth: %s\n"
+msgstr "Dyfnder lliw: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
-"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
-"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniat谩u "
-"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "A weithiodd hwnnw'n iawn?"
+msgid "Loading from floppy"
+msgstr "Llwytho o ddisg meddal"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
+"Mae Drakperm yn cael ei ddefnyddio i weld ffeiliau i'w defnyddio i drwsio "
+"caniatad, perchnogion, a grwpiau drwy msec.\n"
+"Mae modd i chi olygu eich rheolau eich hunfydd yn ysgrifennu droe y rheolau "
+"rhagosodedig."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-"Statws argraffu:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Peidiwch argraffu tudalennau prawf"
+msgid "Slovenia"
+msgstr "Slovenia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Tudalen prawf llun"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Rhowch enw defnyddiwr\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Prawf tudalen arall (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- dyfeisiau PCI ac USB : dyma restr gwerthwyr, dyfais, iswerthwyr ac "
+"isddyfais PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Prawf tudalen arall (Llythyr)"
+msgid "ProgressBar color selection"
+msgstr "Dewis lliw ProgressBar"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Tudalen prawf safonnol"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Dyma'r cofnodion gwahanol ar eich dewislen cychwyn hyd yma.\n"
+"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Argraffu"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Dim tudalennau prawf"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
-"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
-"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
-"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
+"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
+"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
+"cyfartaledd y llwyth yn ddigon isel."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Tudalennau prawf"
+msgid "Radio support:"
+msgstr "Cynnal radio:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ydych chi am osod argraffydd (\"%s\")\n"
-"fel yr argraffydd rhagosodedig?"
+msgid "Installing SANE packages..."
+msgstr "Gosod pecynnau SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Dewis %s allan o amrediad!"
+msgid "boot disk creation"
+msgstr "creu disg cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Rhaid i ddewis %s fod yn rhif!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Rhaid i ddewis %s fod yn gyfanrif"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Gosod yr Argraffydd Rhagosodedig"
+msgid "Change type"
+msgstr "Newid y math"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Gosodiad SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Gosodiadau rhagosodedig yr argraffydd\n"
+"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
+"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
"\n"
-"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
-"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
-"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
-"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
-"sylweddol.."
+"\n"
+"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
+"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau 么l osod\n"
+"yr Official Mandrake Linux User's Guide."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Llwytho Cadarnewdd i Fyny ar gyfer HP LaserJet 1000"
+msgid "paranoid"
+msgstr "Paranoia"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
-"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
-"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
-"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
-"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
-"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
-"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
-"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
-"gosodiadau aliniad y pen gyda'r rhaglen."
+"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
+"nifer o raglenni. Ond peidiwch 芒 rhoi'r enw ffeil yma oherwydd bod y ffeil "
+"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Ffurfweddiad inkjet Lexmark"
+msgid "Resolution"
+msgstr "Cydraniad"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
-"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
+"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
+"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
+"gwasanaethwr argraffu, yn ogystal 芒'r enw rhannu ar gyfer yr argraffydd "
+"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
+"gwybodaeth am grwp gwaith perthynol."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
-"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu 芒'r "
-"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
-"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
-"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
-"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
-"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
+"Ymredymiadau: (arg)\n"
+"\n"
+"Ganiat谩u/Gwrthod atsain icmp."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Ffurfweddiad OKI winprinter "
+msgid "reconfigure"
+msgstr "ailffurfweddu"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
-"eich argraffydd) neu un tebyg."
+"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
+"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
-"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
-"neu ar \"Argraffydd bras\"."
+msgid "Xinetd Service"
+msgstr "Gwasanaeth Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Pa fath o argraffydd sydd gennych?"
+msgid "access to network tools"
+msgstr "mynediad i offer rhwydwaith"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Dewis model yr argraffydd"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Llwytho Cadarnewdd i Fyny ar gyfer HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Darllen cronfa ddata argraffydd..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mae Mandrake Linux 9.1 yn caniat谩u i chi ddefnyddio'r feddalwedd ddiweddaraf "
+"i chwarae ffeiliau cerddoriaeth a sain, golygu a threfnu eich delweddau, "
+"lluniau a fideo."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Dewiswch y model gyda llaw"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Dyma restr o argraffyddion wedi eu awtoganfod."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Mae'r model yn gywir"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Gwall gosod aboot, \n"
+"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
-"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
-"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
-"ei enwi yn y gronfa ddata. Felly, edrychwch i weld 芒 yw'r dewis yn gywir a "
-"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
-"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgr卯n "
-"nesaf.\n"
+"disgrifiad o'r dewisiadau:\n"
"\n"
-"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
+"Yma mae Drakbackup yn caniat谩u i chi newid:\n"
"\n"
-"%s"
+" - Y modd cywasgu:\n"
+" \n"
+" Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
+" cywasgu eich data'n well na gzip (tua 2-10%%).\n"
+" Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
+" angen mwy o amser ar y modd cywasgu hwn (tua 1000%% yn fwy).\n"
+"\n"
+"- Y modd diweddaru:\n"
+"\n"
+" Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
+" nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
+" eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
+" \n"
+"- Y modd .backupignore\n"
+" Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
+" yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
+" ar wah芒n i: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Model eich argraffydd"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Adfer y Dewis\n"
+"Ffeiliau"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Paratoi cronfa ddata argraffydd..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Lleoliad"
+msgid "Please fill or check the field below"
+msgstr "Llanwch neu diciwch y maes islaw"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Disgrifiad"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Enw'r argraffydd"
+msgid "Boot Protocol"
+msgstr "Protocol Cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
-"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
+msgid "LVM-disks %s\n"
+msgstr "Dias LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Rhowch Enw'r Argraffydd a Sylw"
+msgid "The package %s is needed. Install it?"
+msgstr "Rhaid cael pecyn %s. Ydych chi am ei osod?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Gwneud porth argraffu ar gael ar gyfer CUPS..."
+msgid "On boot"
+msgstr "Cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Gwirio'r ddyfais a ffurfweddu HPOJ..."
+msgid "Bus identification"
+msgstr "Dynodiad bws"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Mynediad i gerdyn cof ffoto ar eich dyfais HP amlbwrpas"
+msgid "Please make a backup of your data first"
+msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Sganio eich dyfais amlbwrpas HP"
+msgid "Vatican"
+msgstr "Vatican"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Gosod pecynnau mtools..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Gosod pecynnau SANE..."
+msgid "Boot ISO"
+msgstr "Cychwyn yr ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Gosod pecyn HPOJ..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"A yw eich argraffydd yn ddyfais amlbwrpas gan HP neu Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 gyda sganiwr, Sony IJP-V100), HP "
-"PhotoSmart neu HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Rhestr Tynnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Rhaid rhoi llinell gorchymyn!"
+msgid "A customizable environment"
+msgstr "Mae modd addasu eich byd..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Llinell orchymyn"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Yma medrwch bennu unrhyw fan lle dylid cyfeirio'r gwaith yn lle ei anfon at "
-"yr argraffydd."
+msgid "Morocco"
+msgstr "Morocco"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Peipio i orchymyn"
+msgid "Which printer model do you have?"
+msgstr "Pa fath o argraffydd sydd gennych?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Canfyddwyd model %s %s"
+msgid "Add a new printer"
+msgstr "Ychwanegu argraffydd newydd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Rhaid cynnig URI dilys!"
+msgid " All of your selected data have been "
+msgstr " Mae eich dewis data wedi ei "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI Dyfais Argraffu"
+msgid "<-- Delete"
+msgstr "<-- Dileu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
-"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
-"cael eu cynnal gan bob sbwlydd ."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Porth"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Enw'r gwesteiwr neu IP yr argraffydd"
+msgid "chunk size"
+msgstr "maint darn"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Dylai rhif porth fod yn gyfanrif!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "gorchmynion cyn cychwyn, neu 'c' am y llinell orchymyn."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Mae enw'r gwesteiwr argraffu neu IP ar goll!"
+msgid "Problems installing package %s"
+msgstr "Anhawster wrth osod pecyn %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr "
-"neu IP'r argraffydd ac yn ddewisol rhif y porth (Y rhagosodedig yw 9100). Ar "
-"wasanaethwyr HP JetDirect rhif y porth, fel rheol, yw 9100, gall amrywio ar "
-"wasanaethwyr eraill. Gweler llawlyfr eich caledwedd"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Dewiswch un o'r argraffyddion sydd wedi eu awtoganfod o'r rhestr neu rhowch "
-"yr enw gwesteiwr neu IP a'r rhif porth dewisol (9100 yw'r rhagosodedig) i'r "
-"meysydd mewnbwn."
+"\n"
+"\n"
+"I gyflwyno adroddiad gwall, cliciwch ar y botwm adroddiad.\n"
+"Bydd hyn yn agor ffenestr porwr gwe yn https://drakbug.mandrakesoft.com\n"
+" lle welwch ffurflen i'w llenwi. Bydd yr wybodaeth rhowch arno'n cael ei\n"
+"drosglwyddo i'r gwasanaethwr\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Dewisiadau Argraffydd TCP/Soced"
+msgid "Add a scanner manually"
+msgstr "Ychwanegu sganiwr gyda llaw"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ",Gwesteiwr \"%s\", porth %s"
+msgid "Reload partition table"
+msgstr "Ail-lwytho'r tabl rhaniad"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", gwesteiwr \"%s\", porth %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, bwrdd gwaith)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Chwilio'r rhwydwaith..."
+msgid "Search for fonts in installed list"
+msgstr "Chwilio am ffontiau yn y rhestr gosod"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Awto ganfod argraffydd"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Mae enw rhes NCP ar goll"
+msgid "Boot"
+msgstr "Cychwyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Mae enw gwasanaethwr NCP ar goll!"
+msgid "Tuner type:"
+msgstr "Math o diwniwr"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Enw Rhes Argraffu"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
+"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig dwy.\n"
+"Mae 'r systemau'n addas gar gyfer ffurfweddiad arbennig.\n"
+"\n"
+" *\"pdq\" - sy'n golygu \"print, don't queue\", yw'r dewis os oes gennych\n"
+"gysylltiad uniongyrchol 芒'ch argraffydd a'ch bod eisiau medru tynnu allan o "
+"waith\n"
+"argraffu pan fo'r papur wedi mynd yn sownd ac nad oes gennych argraffyddion\n"
+"wedi eu cysylltu drwy rwydwaith. (\"Dim ond rhwydweithiau syml mae \"pdq\" "
+"yn ei\n"
+"drin ac mae'n araf ar rwydweithiau) Dewiswch \"pdq\" os mai dyma yw eich\n"
+"tro cyntaf yn GNU/Linux.\n"
+" *\"%s\" - \"Common Unix Printing System\". Mae hwn yn dda ar gyfer\n"
+"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
+"yn\n"
+"medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
+"\"\n"
+"felly mae'n cydweddi 芒'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
+"gwneud\n"
+"nifer o driciau, ond mae bron mor syml i'w osod \"pdq\". Os ydych amgen "
+"hwn\n"
+"i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-lpd\".\n"
+"Mae gan \"%s\" wyneb graffigol ar gyfer argraffu neu rheoli'r argraffu.\n"
+"\n"
+"Os ydych yn dewis yn awr ac yn ddiweddarach yn penderfynu eich bod\n"
+"am newid eich system argraffu gallwch ei newid drwy gyfrwng PrinterDrake\n"
+"yng Nghanolfan Rheoli Mandrake a chlicio'r botwm arbenigwr."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Gwasanaethwr Argraffydd"
+msgid "\"Menu\" key"
+msgstr "Bysell \"Dewislen\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
-"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
-"芒'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
-"unrhyw enw defnyddiwr a chyfrinair perthnasol."
+"\n"
+"\n"
+"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
+"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
+"neu ar \"Argraffydd bras\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Dewisiadau Argraffydd NetWare"
+msgid "Security Administrator:"
+msgstr "Gweinyddwr Diogelwch:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Rhowch eich mewngofnod"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"os wedi ei osod i iawn, gwirio caniat芒d ffeiliau yng nghartref y defnyddiwr."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Cysylltu eich argraffydd i wasanaethwr Linux a gadael i'ch peiriant/"
-"peiriannau Windows gysylltu iddo fel cleient.\n"
-"\n"
-"Ydych chi am barhau i osod yr argraffydd hwn?"
+"Nid oes gennych cysylltiad 芒'r Rhyngrwyd.\n"
+"Cr毛wch un drwy glicio ar 'Ffurfweddu'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Cop茂o ffontiau"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Awtomeiddwyd"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Ydych chi eisiau profi'r ffurfweddiad?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
-"IPP a gosod argraffu o'r peiriant hwn gyda'r \"%s\" yn Printerdrake.\n"
-"\n"
+"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
+"org."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Rydych ar fin gosod y modd i argraffu i gyfrif Windows gyda chyfrinair. "
-"Oherwydd gwall ym mhensaern茂aeth meddalwedd cleient Samba mae'r cyfrinair yn "
-"cael ei osod mewn testun plaen ar y llinell orchymyn y cleient Samba sy'n "
-"cael ei ddefnyddio i anfon gwaith argraffu i'r gwasanaethwr Windows. Felly "
-"mae'n bosibl i bob defnyddiwr ar y peiriant i arddangos y cyfrinair ar y "
-"sgr卯n drwy'r gorchymyn \"ps auxwww\".\n"
+"Safonol: Dyma'r safon diogelwch sy'n cael ei argymell ar gyfer cyfrifiadur "
+"i'w ddefnyddio\n"
+" i gysylltu 芒'r Rhyngrwyd fel cleient.\n"
"\n"
-"Rydym yn argymell eich bod yn defnyddio un o'r dulliau gwahanol hyn ( yn yr "
-"holl achosion hyn, rhaid i chi wneud yn siwr mae dim ond peiriannau o'ch "
-"rhwydwaith lleol chi sydd 芒 mynediad i'ch gwasanaethwr Windows, e.e. drwy "
-"gyfrwng mur cadarn).\n"
+"Uchel: Mae rhai cyfyngiadau eisoes, ac mae gwiriadau'n cael eu rhedeg "
+"bob nos.\n"
"\n"
-"Defnyddio cyfrif heb gyfrinair ar eich gwasanaethwr Windows, defnyddio "
-"cyfrif \"Ymwelydd\" neu gyfrif arbennig ar gyfer argraffu. Peidiwch tynnu "
-"eich amddiffyniad cyfrinair o gyfrif personol na'r cyfrif gweinyddwr.\n"
+"Uchaf: Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel "
+"gwasanaethwr sy'n medru\n"
+" derbyn cysylltiadau o nifer o gleientiau. Os mai eich "
+"peiriant yw'r unig gleient ar y\n"
+" Rhyngrwyd, dylech ddewis lefel is.\n"
"\n"
-"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
-"LPD. Yna gosod argraffu o'r peiriant hwn gyda chyswllt \"%s\" yn "
-"Printerdrake.\n"
+"Paranoia: Mae'n debyg i'r lefel cynt ond mae'r system wedi ei gau'n llwyr a "
+"nodweddion diogelwch\n"
+" ar eu heithaf.\n"
"\n"
+"Gweinyddwr Diogelwch:\n"
+" Os yw'r dewis 'Rhybuddion Diogelwch' wedi ei ddewis, bydd "
+"rhybuddion diogelwch yn cael eu\t anfon i'r defnyddiwr hwn (enw "
+"defnyddiwr neu e-bost)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "RHYBUDD DIOGELWCH!"
+msgid "Save packages selection"
+msgstr "Cadw'r dewis becynnau"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Mae enw rhannu Samba ar goll!"
+msgid "Remove the last item"
+msgstr "Tynnu'r eitem olaf"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn 么l y defnyddwyr, sy'n "
+"bwysig )"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Awto ganfyddwyd"
+msgid "No net boot images created!"
+msgstr "Heb greu delweddau cychwyn y rhwyd!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Grwp gwaith"
+msgid "use pptp"
+msgstr "defnyddiwch pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Rhannu enw"
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
+"cyfrifiadur"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP Gwasanaethwr SMB"
+msgid "Learn how to use this printer"
+msgstr "Gwybod sut i ddefnyddio'r argraffydd"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Gwasanaethwr gwesteiwr SMB"
+msgid "Configure the network now"
+msgstr "Ffurfweddwch y rhwydwaith"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Os cafodd yr argraffydd ei awtoganfod, dewiswch ef o'r rhestr ac ychwanegu "
-"enw defnyddiwr, cyfrinair a/neu grwp gwaith yn 么l yr angen."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
-"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
-"gwasanaethwr argraffu, yn ogystal 芒'r enw rhannu ar gyfer yr argraffydd "
-"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
-"gwybodaeth am grwp gwaith perthynol."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Argraffydd \"%s\" ar wasanaethwr \"%s\""
+"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
+"digwyddodd y gwall canlynol: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", argraffydd \"%s\" ar wasanaethwr \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Pa sector hoffech chi symud ato?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Mae enw'r argraffydd pell ar goll!"
+msgid "Do you want to click on this button?"
+msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Mae enw'r gwesteiwr pell ar goll!"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Enw'r argraffydd pell"
+msgid "Manual configuration"
+msgstr "Ffurfweddiad gyda llaw"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Enw gwesteiwr pell"
+msgid "search"
+msgstr "chwilio"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
-"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Dewisiadau Argraffydd lpd Pell"
+"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
+"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
+"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
+"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Ffurfweddiad gyda llaw"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (gyrrwr gosod dangoswr)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Rhaid i enw gwesteiwr Zeroconf beidio cynnwys ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
-"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
+"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
+"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
+"syslog bob tro."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
+msgid "Unknown/Others"
+msgstr "Anhysbys/Eraill"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neu rhowch enw "
-"dyfais/ffeil ar y llinell mewnbwn"
+msgid "No TV Card detected!"
+msgstr "Heb ganfod Cerdyn Teledu!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Dewisiadau"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Dewiswch yr argraffydd i drin y gwaith argraffu."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Dewiswch yr argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn "
-"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
-"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
+"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
+"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu 芒'r "
+"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
+"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
+"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
+"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
+"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Dyma restr o argraffyddion wedi eu awtoganfod."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Cynnyrch y cpu (ee 8 am Pentiumlll,...]"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Does dim dewis arall ar gael ar hyn o bryd"
+msgid "Auto-detected"
+msgstr "Awto ganfyddwyd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Bydd ffurfweddi'r argraffydd yn digwydd yn awtomatig. Os na chafodd eich "
-"argraffydd ei ganfod yn gywir neu byddai'n well gennych ffurfweddiad unigryw "
-"i'ch argraffydd, cychwynnwch \"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Mae'r argraffydd canlynol wedi ei awtoganfod"
+"Rydych ar fin ffurfweddu eich cyfrifiadur i gwasanaethwr PXE fel "
+"gwasanaethwr DHCP a gwasanaethwr\n"
+"TFTP i adeiladu gwasanaethwr gosod.\n"
+"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
+"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
+"\n"
+"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
+"gyda drakconnect cyn mynd ymhellach.\n"
+"\n"
+"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
+"(LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Dewiswch yr argraffydd i drin y gwaith argraffu neu rhowch enw dyfais/ffeil "
-"ar y ninell mewnbwn"
+"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
+"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12269,1104 +12208,784 @@ msgstr ""
"Dewiswch yr argraffydd i'w osod neu rhowch enw dyfais/ffeil ar y ninell "
"mewnbwn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Yn lle hynny, rhowch enw dyfais/ffeil ar y ninell mewnbwn"
+msgid "Refuse"
+msgstr "Gwrthod"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Os nad hwn yw'r un rydych am ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y "
-"llinell mewnbwn."
+"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn 么l \n"
+"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Argraffyddion ar gael"
+msgid "Remote Printers"
+msgstr "Argraffyddion Pell"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Heb ganfood argraffydd!"
+msgid "Creating and formatting file %s"
+msgstr "Creu a fformatio ffeil %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Rhaid cynnig enw dyfais neu ffeil!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "oa wedi ei osod i iawn, gwirio ychwanegiadau/tynnu ffeiliau sgid."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
-"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
-"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0, "
-"ail argraffydd USB: /dev/usb/lp1,...)."
+"Mae'r HP LaserJet 1000 angen cael ei gadarnwedd wedi ei lwytho i fyny ar 么l "
+"ei gychwyn. Estynnwch y pecyn gyrrwr Windows o safle gwe HP (nid yw'r "
+"gadarnwedd ar CD'r argraffydd yn gweithio) a thynnwch y ffeil cadarnwedd "
+"ohono gan ddadgywasgu 'r ffeil 'exe' gyda rhaglen 'dadzipio' a chwilio am y "
+"ffeil 'sihp1000.img'. Cop茂o'r ffeil i gyfeiriadur '/etc/printer'. Yna bydd "
+"yn cael ei ganfod gan y sgript llwytho awtomatig a'i lwytho pryd bynnag fydd "
+"yr argraffydd wedi ei gysylltu 芒'i gychwyn.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Argraffydd Lleol"
+msgid "Choose an existing LVM to add to"
+msgstr "Dewis LVM presennol i ychwanegu ato"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "Argraffydd USB \\#\"%s"
+msgid "xfs restart"
+msgstr "ail gychwyn xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Argraffydd ar borth paralel \\#\"%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
+"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "dim rhaniadau ar gael"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Argraffydd rhwydwaith \"%s\", porth %s"
+msgid "Use the scanners on hosts: "
+msgstr "Defnyddio sganwyr ar westeiwyr:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Canfyddwyd %s"
+msgid "Unselected All"
+msgstr "Dad ddewis Popeth"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Datrysydd Enw Parth"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", rhwydwaith argraffu \"%s\", porth %s"
+msgid "Encryption key (again)"
+msgstr "Allwedd amgryptio (eto)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
-"\n"
-"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
-"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
-"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
+msgid "Samba share name missing!"
+msgstr "Mae enw rhannu Samba ar goll!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Awtoganfod argraffyddion sy'n gysylltiedig 芒 pheiriannau'n rhedeg Microsoft "
-"Windows"
+msgid "True Type install done"
+msgstr "Wedi gosod True Type"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Awtoganfod argraffyddion sy'n gysylltiedig yn uniongyrchol 芒'r rhwydwaith "
-"lleol"
+msgid "Detection in progress"
+msgstr "Canfod ar waith"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Awto ganfod argraffyddion sy'n gysylltiedig a'r peiriant hwn"
+msgid "Build Whole Kernel -->"
+msgstr "Adeiladu'r cnewyllyn gyfan -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Croeso i %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Croeso Cychwyn"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Mae'r argraffydd canlynol\n"
"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"芒'r cyfrifiadur hwn,\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig 芒'r peiriant, cysylltwch nhw "
-"芒'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
+"%s%s\n"
+"wedi ei gysylltu'n uniongyrchol 芒'ch system"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"芒'r cyfrifiadur hwn, yn gysylltiedig 芒'r rhwydwaith.\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig 芒'r peiriant, cysylltwch nhw "
-"芒'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
-"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
-"ymlaen.\n"
-"\n"
-"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
-"awtoganfod argraffyddion sy'n gysylltiedig 芒'r peiriant hwn. Felly, "
-"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Rhannu argraffydd ar gwesteiwr/rhwydwaith:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"芒'r cyfrifiadur hwn,yn gysylltiedig 芒'r rhwydwaith neu i beiriant Windows "
-"pell.\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig 芒'r peiriant, cysylltwch nhw "
-"芒'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
-"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
-"ymlaen.\n"
-"\n"
-"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
-"awtoganfod argraffyddion sy'n gysylltiedig 芒'r peiriant hwn. Felly, "
-"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
+"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
+"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
+"gorchymyn, e.e \"%s <file>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-" Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Mae'r dewin yn caniat谩u i chi osod argraffyddion lleol neu bell i'w "
-"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
-"rhwydwaith.\n"
-"\n"
-"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
-"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
-"gyrwyr a mathau o gysylltiadau argraffyddion."
+"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
+"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
+"dewisiadau\n"
+"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
+"wybodaeth mae\n"
+"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
+"unrhyw\n"
+"ddifrod."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Nid yr label CD cywir. Disg wedi ei labelu %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Croeso i'r Gwasanaeth Rhannu Cysylltiad 芒'r Rhyngrwyd\n"
"\n"
+"%s\n"
"\n"
-"Nid oedd Printerdrake yn medru adnabod eich argraffydd %s. Dewiswch yr un "
-"cywir o'r rhestr."
+"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Ciwba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr "ar "
+msgid "Searching for new printers..."
+msgstr "Chwilio am argraffyddion newydd..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Ffurfweddu argraffydd ..."
+msgid " (multi-session)"
+msgstr "(aml-sesiwn)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Chwilio am argraffyddion newydd..."
+msgid "Kernel Boot Timeout"
+msgstr "Goramser cychwyn y cnewyllyn"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NODYN: Yn dibynnu ar yr argraffydd a'r system argraffu bydd hyd at %d MB o "
-"feddalwedd ychwanegol yn cael ei osod."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Ydych chi'n siwr eich bod am osod argraffu ar y peiriant hwn?\n"
+"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
+"gyda XFree %s.\n"
+"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
+"mewn 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Ydych chi am alluogi argraffu ar yr argraffyddion enwwi'r uchod?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Ydych chi am alluogi argraffu ar argraffydd mewn rhwydwaith leol?\n"
+msgid "Hungarian"
+msgstr "Hwngaraidd"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Ydych chi am ganiat谩u argraffu ar yr argraffyddion enwir uchod neu ar yr "
-"argraffyddion ar y rhwydwaith lleol?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"(Gwnewch yn siwr bod eich argraffyddion wedi eu cysylltu a'u troi mlaen).\n"
+"Dewiswch eich darparwr.\n"
+"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Nid oes unrhyw argraffydd wedi ei ganfod wedi ei gysylltu'n uniongyrchol "
-"芒'ch cyfrifiadur"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Mae yna %d argraffydd anhysbys wedi eu cysylltu'n uniongyrchol 芒'ch system"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Mae un argraffydd anhysbys wedi ei gysylltu'n uniongyrchol 芒'ch system"
+msgid "LDAP Server"
+msgstr "Gwasanaethwr LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s%s\n"
-"wedi ei gysylltu'n uniongyrchol 芒'ch system"
+"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
+"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
+"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
+"sydd ddim ei angen."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s%s\n"
-"wedi ei gysylltu'n uniongyrchol 芒'ch system"
+msgid "Choose your country"
+msgstr "Dewiswch eich gwlad"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Mae argraffyddion canlynol\n"
"\n"
-"%s%s\n"
-"wedi eu cysylltu'n uniongyrchol 芒'ch system"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "a %d argraffydd anhysbys"
+"- Ffeiliau System: \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and one unknown printer"
-msgstr "ac un argraffydd anhysbys"
+msgid "Standalone Tools"
+msgstr "Offer Unigol"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking your system..."
-msgstr "Gwirio eich system..."
+msgid "Where"
+msgstr "Lle"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr "Ail gychwynCUPS"
+msgid "but not matching"
+msgstr "ond heb fod yn cydweddu"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-"Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu eto.\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Esiamplau cywir ar gyfer IP:\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Nid yw'r IP'n gywir.\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Server IP missing!"
-msgstr "IP'r gwasanaethwr ar goll!"
+"Yma medrwch ddewis gyrrwr arall (un ai OSS neu ALSA) ar gyfer eich cerdyn "
+"sain (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-"Os nad oes porth yn cael ei gynnig, bydd 631 yn cael ei gymryd fel y "
-"rhagosodedig."
+msgid "Configuring PCMCIA cards..."
+msgstr "Ffurfweddu cardiau PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Rhowch gyfeiriad IP a porth gwesteiwr yr argraffydd rydych am ei ddefnyddio."
+msgid "kdesu missing"
+msgstr "kdesu ar goll"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Mynediad at argraffydd ar wasanaethwr CUPS pell"
+msgid "Encryption key"
+msgstr "Allwedd amgryptio"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Tynnu'r gwesteiwr"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Golygu'r gwesteiwr"
+msgid "Christmas Island"
+msgstr "Christmas Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Ychwanegu gwasanaethwr"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Methodd gosod cychwynnydd. Digwyddodd y gwall canlynol:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ychwanegwch y gwasanaethwyr CUPS yr argraffwyr rydych am eu defnyddio. Bydd "
-"angen gwneud hyn dim ond os nad yw'r gwasanaethwyr yn darlledu eu gwybodaeth "
-"argraffu i'r rhwydwaith leol."
+msgid "EIDE/SCSI channel"
+msgstr "Sianel EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "Cyfeiriad IP gwesteiwr/rhwydwaith"
+msgid "Set this printer as the default"
+msgstr "Gosod yr argraffydd fel y rhagosodedig"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Mae'r gwesteiwr/rhwydwaith ar y rhestr yn barod, does dim modd ei "
-"ychwanegu.\n"
+msgid "partition %s"
+msgstr "rhaniad %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Nid yw IP'r gwesteiwr/rhwydwaith yn gywir.\n"
+msgid "Paranoid"
+msgstr "Paranoia"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Cyfeiriad y gwestriwr/rhwydwaith ar goll."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Dewis y rhwydwaith neu westeiwr ddylai'r argraffyddion lleol fod ar gael "
-"iddynt:"
+msgid "<-- Del User"
+msgstr "<-- Dileu Defndyddiwr"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Rhannu argraffyddion lleol"
+msgid "Location on the bus"
+msgstr "Lleoliad ar y bws"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Tynnu'r gwesteiwr/rhwydwaith"
+msgid "No printer found!"
+msgstr "Heb ganfood argraffydd!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Golygu'r gwesteiwr/rhwydwaith"
+msgid "the vendor name of the device"
+msgstr "enw gwerthwr y ddyfais"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Ychwanegu gwesteiwr/rhwydwaith"
+msgid "Erase entire disk"
+msgstr "Dileu'r ddisg gyfan"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r argraffydd(ion) lleol fod ar "
-"gael:"
+msgid " (Default)"
+msgstr "(Rhagosodedig)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Pan mae'r dewis yma ar gael, gwneud yn siwr wrth gychwyn CUPS fod\n"
-"\n"
-"- os yw LPD/LPRng wedi ei osod, na fydd CUPS yn ysgrifennu dros /etc/"
-"printcap\n"
-"\n"
-"- os yw /etc/cups/cupsd.conf ar goll, bydd yn cael ei greu\n"
-"\n"
-"- pan mae gwybodaeth am argraffydd yn cael ei ledaenu, nid yw'n cynnwys "
-"\"localhost\" fel enw gwasanaethwr.\n"
+"Ymresymiadau: ()\n"
"\n"
-"Os yw rhai o'r rhain yn achosi anhawster, diffoddwch y dewis hwn, ond bydd "
-"rhaid i chi ofalu amdanynt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Cywiro cyswllt CUPS yn awtomatig"
+"Os yw SERVER_LEVEL (or SECURE_LEVEL if absent) yn fwy na 3\n"
+" yn /etc/security/msec/security.conf, creu'r symlink /etc/security/msec/"
+"server\n"
+"i bwyntio at /etc/security/msec/server.<SERVER_LEVEL>. Mae /etc/security/"
+"msec/server\n"
+"yn cael ei ddefnyddio gan chkconfig --ychwanegu at i benderfynnu ychwnaegu "
+"gwasanaeth\n"
+"os yw ar gael yn y ffeil during the installation of packages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Drwy gychwyn hwn bydd yn caniatau argraffu testun plaenyn yr iaeth "
-"Siapanaeeg. Defnyddiwch hwn os ydych wir angen argraffu testun yn "
-"Siapanaeeg, oherwydd os ydych yn ei dderfnyddio ni fydd modd argraffu nodau "
-"acennog mewn ffontiau lladin ragor ac ni fydd modd newid ymyl tudalen na "
-"maint ffontiau, ag ati. Mae hyn yn effeithio ar argraffyddion sydd wedi eu "
-"diffinio ar y cyfrifiadur hwn. Os ydych am argraffu testun siapanaeeg ar "
-"argraffydd sy'n gysylltiedig 芒 chyfrifiadur pell, bydd angen cychwyn y "
-"nodwedd ar y cyfrifiadur hwnnw."
+msgid "Automatic reconfiguration"
+msgstr "Ail ffurfweddiad awtomatig"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Modd argraffu testun Siapanae毛g"
+msgid "Receiving Speed:"
+msgstr "Derbyn Cyflymder"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"I gael mynediad at argraffyddion ar wasanaethwyr CUPS pell yn eich "
-"rhwydwaith lleol dim ond angen i chi gychwyn yr dewis \"Canfod "
-"argraffyddion ar gyfrifiaduron pell\" ; bydd y gwasanaethwyr CUPS yn dweud "
-"wrth eich cyfrifiadur am eu argraffydd. Mae pob argraffydd sy'n hysbys i'ch "
-"cyfrifiadur yn cael ei restri yn adran \"Argraffyddion pell\" prif ffenestr "
-"Printerdrake. Os yw/nad yw eich gwasanaethwr(wyr) CUPS ar eich rhwydwaith "
-"lleol rhaid rhoi cyfeiriad(au) IP ac yn ddewisol rhif(au) porth yma i gael "
-"gwybodaeth am yr argraffydd gan y gwasanaethwr(wyr)."
+msgid "Turks and Caicos Islands"
+msgstr "Turks and Caicos Islands"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Dim"
+msgid "permissions"
+msgstr "caniatadau"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Gasanaethwyr CUPS ychwanegol:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Dim cyfrifiaduron pell"
+msgid "<- Previous"
+msgstr "<- Cynt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Ffurfweddiad addasu"
+msgid "Internet Connection Sharing configuration"
+msgstr "Ffurfweddiad Rhannu Cysylltiad 芒'r Rhyngrwyd"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Rhannu argraffydd ar gwesteiwr/rhwydwaith:"
+msgid "Toggle between flat and group sorted"
+msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Canfod argraffyddion ar gyfrifiaduron pell, yn awtomatig."
+msgid "Themes"
+msgstr "Them芒u"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Mae' argraffyddion y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
+msgid "Options: %s"
+msgstr "Dewisiadau: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Medrwch benderfynu a ddylai argraffydd ar gyfrifiadur pell fod ar gael ar "
-"gyfer y cyfrifiadur hwn."
+"Rydych yn defnyddio %s fel rheolwr cychwyn.\n"
+"Cliciwch Ffurfweddu i gychwyn dewin gosod"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Yma medrwch benderfynu a ddylai'r argraffyddion sy'n gysylltiedig 芒'r "
-"cyfrifiadur hwn fod ar gael i gyfrifiaduron pell a pha rai."
+msgid "OKI winprinter configuration"
+msgstr "Ffurfweddiad OKI winprinter "
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Ffurfweddiad argraffydd CUPS "
+msgid "Saint Helena"
+msgstr "Saint Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Awtoganfod argraffydd (Argraffyddion lleol, TCP/Socket, ac SMB)"
+msgid "Security Level"
+msgstr "Lefel Diogelwch"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Nid yw rhai camau wedi eu cwblhau.\n"
"\n"
-"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
-"cael eu canfod yn awtomatig."
+"Ydych chi wir eisiau gorffen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
+msgid "Sudan"
+msgstr "Swdan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Dewiswch Gysylltiad Argraffydd"
+msgid "Polish (qwertz layout)"
+msgstr "Pwylaidd (gosodiad qwerty)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Mae'r HP LaserJet 1000 angen cael ei gadarnwedd wedi ei lwytho i fyny ar 么l "
-"ei gychwyn. Estynnwch y pecyn gyrrwr Windows o safle gwe HP (nid yw'r "
-"gadarnwedd ar CD'r argraffydd yn gweithio) a thynnwch y ffeil cadarnwedd "
-"ohono gan ddadgywasgu 'r ffeil 'exe' gyda rhaglen 'dadzipio' a chwilio am y "
-"ffeil 'sihp1000.img'. Cop茂o'r ffeil i gyfeiriadur '/etc/printer'. Yna bydd "
-"yn cael ei ganfod gan y sgript llwytho awtomatig a'i lwytho pryd bynnag fydd "
-"yr argraffydd wedi ei gysylltu 芒'i gychwyn.\n"
+msgid "Syria"
+msgstr "Syria"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Ymresymiadau: (umasg)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Gosod umasg y defnyddiwr"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Ymresymiadau: (val)\n"
-"\n"
-"Gosod amser allan y gragen. Gwerth sero'n golygu dim amser allan."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Croeso i %s y dewiswr systemau gweithredu! \n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Ymresymiad: (size)\n"
+"Dewiswch system weithredu o'r rhestr uchod neu\n"
+"arhoswch %d eiliad am gychwyn rhagosodedig\n"
"\n"
-"Gosod maint hanes gorchymyn cragen. Gwerth -1 yn golygu diderfyn."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "oa wedi ei osod i iawn, gwirio ychwanegiadau/tynnu ffeiliau sgid."
+msgid "Portuguese"
+msgstr "Portiwgalaidd"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "os wedi ei osod i iawn, gwirio pyrth agored."
+msgid "Loopback file name: "
+msgstr "Enw ffeil cylch-么l"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"os wedi ei osod, anfon yr adroddiad e-bost i'r cyfeiriad e-bost neu ei anfon "
-"i'r gwraidd."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Dylai cyfeiriad DNS fod mewn fformat 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "os wedi ei osod i iawn, adrodd y gwirio drwy e-bost"
+msgid "Serbia"
+msgstr "Serbia"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"os wedi ei osod i iawn, gwirio ffeiliau/cyfeiriaduron ysgrifenadwy gan bawb."
+msgid "Newzealand"
+msgstr "Zeland Newydd"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "os wedi ei osod i iawn, adrodd adroddiadau gwirio i tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Dylai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "os wedi ei osod i iawn, gwirio yn erbyn y gronfa ddata rpm."
+msgid "CapsLock key"
+msgstr "Bysell CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"os wedi ei osod i iawn, gwirio os yw'r dyfeisiau rhwydwaith mewn modd cymysg"
+msgid "Install bootloader"
+msgstr "Gosod cychwynnwr"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "os wedi ei osod i iawn, gwirio gyda chkrootkit."
+msgid "Select the memory size of your graphics card"
+msgstr "Dewiswch faint y cof eich cerdyn graffeg"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"os wedi ei osod i iawn, gwirio caniat芒d ffeiliau yng nghartref y defnyddiwr."
+"[OPTIONS]\n"
+"Rhaglen Cyswllt a Monitro'r Rhwydwaith a'r Rhyngrwyd\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"os wedi ei osod i iawn, , gwirio ychwanegu/tynnu ffeiliau gwraidd suid."
+msgid "Dynamic IP Address Pool:"
+msgstr "Pwll Cyfeiriad IP dynameg"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "os wedi ei osod i iawn, adrodd y gwirio i syslog."
+msgid "LVM name?"
+msgstr "Enw LVM"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"os wedi ei osod i iawn, gwirio am gyfrinair gwag, neu un arall ddyllai fod "
-"yn /etc/shadow neu eraill gyda enw 0."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Cafodd rhai dyfeisiau yn nosbarth caledwedd\"%s\" eu tynnu:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "os wedi ei osod i iawn, rhedeg y gwiriadau diogelwch dyddiol."
+msgid "Found %s %s interfaces"
+msgstr "Wedi canfod rhyngwynebau %s %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "os wedi ei osod i iawn, gwirio checksum y ffeiliau suid/sgid."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "os wedi ei osod i iawn, gwirio cyfrinair gwag y /etc/shadow."
+msgid "Post Install"
+msgstr "Wedi'r Gosod"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "os wedi ei osod i iawn, adrodd ar ffeiliau heb berchennog."
+msgid "The internal domain name"
+msgstr "Enw'r parth mewnol"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Ymresymiadau: (umask)\n"
-"\n"
-"Gosod gwraidd umask."
+msgid "Card IRQ"
+msgstr "IRQ y cerdyn"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Ymresymiadau: (umasg)\n"
"\n"
-"Gosod lleiafswm hyd cyfrinair a lleiafswm digidau a lleiafswm llythrennau "
-"mawr."
+"Gosod umasg y defnyddiwr"
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Gosod hyd hanes cyfrinair i rwysstro ailddefnyddio'r cyfrinair."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Ymresymiadau: (max, inactive=-1)\n"
-"\n"
-"Gosod cyfrinair yn erbyn \\fImax\\fP dyddiau ac oedi i newid i \\fIinactive"
-"\\fP."
+"Rhaglen mewnforio a monitro "
+"ffontiau \n"
+"--windows_import : mewnforio o bob rhaniad windows.\n"
+"--xls_fonts : dangos pob ffont sy'n bodoli o xls\n"
+"--strong : cadarnhad cryf o ffont.\n"
+"--install : derbyn unrhyw ffeil ffont ac unrhyw gyfeiriadur.\n"
+"--uninstall : dadosod unrhyw ffont neu gyfeiriadur ffont.\n"
+"--replace : amnewid pob ffont os yw'n bod\n"
+"--application : 0 dim rhaglen.\n"
+" : 1 pob rhaglen ar gael yn cael ei gynnal.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Ymresymiadau: (name)\n"
-"\n"
-"Ychwanegu'r enw fel eithriad i drin cyfrinair yn erbyn msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Ymresymniadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi sulogin(8 mewn defnydd defnyddiwr unigol."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi gwiriad diogelwch dyddiol."
+msgid "LILO with text menu"
+msgstr "LILO gyda dewislen testun"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi gwiriad cymysgaredd cardiau ethernet."
+msgid "Everything (no firewall)"
+msgstr "Popeth (dim mur cadarn)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Ymresymiadau: arg)\n"
-"\n"
-"Defnyddio cyfrinair i wirio defnyddiwr."
+msgid "You must specify a kernel image"
+msgstr "Rhaid enwi delwedd cnewyllyn"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-" Galluogu su o aelodau grwp olwyn yn unig neu ganiat谩u su o unrhyw "
-"ddefnyddiwr."
+msgid ", multi-function device on USB"
+msgstr ", dyfais amlbwrpas ar USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi gwiriad diogelwch msec bob awr."
+msgid "Do"
+msgstr "Gwneud"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Ymresymiadau: arg)\n"
-"\n"
-"Galluogi?Analluogi mewngofnodi pecynnau anarferol IPv4."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Cysylltu 芒'r drych i estyn y rhestr o becynnau sydd ar gael"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi libsafe os yw ar y system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lithuenaidd AZERTY (hen)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Ymresymiadau: (arg, alert=1)\n"
-"\n"
-"Galluogi/Analluogi Amddiffyn spwffio IP"
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasilaidd (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Ymresymiadau: (arg, alert=1)\n"
-"\n"
-"Galluogi/Analluogi amddiffyn spwffio datrys enw. Os yw\n"
-"\\fIalert\\fP yn wir, adrodd i syslog."
+msgid "IP address of host/network:"
+msgstr "Cyfeiriad IP gwesteiwr/rhwydwaith"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Ymresymiadau: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Galluogi/Analluogi adroddiadau syslog i consol 12. \\fIexpr\\fP yw'r \n"
-"disgrifiad o beth iw' gofnodi (gw. syslog conf(5) am wyboodaeth) a\n"
-"dev y ddyfais i greu cofnod."
+"bar cynnydd cydfesuryn y\n"
+"yn ei gornel uchaf chwith"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Galluogi/Analluogi crontab ac at ar gyfer defnyddwyr. Rhoi defnyddwyr 芒 "
-"chniat芒d yn\n"
-"/etc/cron.allow a /etc/at.allow\n"
-" (gw. man yn(1) a crontab(1))."
+msgid "System installation"
+msgstr "Gosod y system"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Ymresymiadau: ()\n"
-"\n"
-"Os yw SERVER_LEVEL (or SECURE_LEVEL if absent) yn fwy na 3\n"
-" yn /etc/security/msec/security.conf, creu'r symlink /etc/security/msec/"
-"server\n"
-"i bwyntio at /etc/security/msec/server.<SERVER_LEVEL>. Mae /etc/security/"
-"msec/server\n"
-"yn cael ei ddefnyddio gan chkconfig --ychwanegu at i benderfynnu ychwnaegu "
-"gwasanaeth\n"
-"os yw ar gael yn y ffeil during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent and the Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Caniat谩u i bob gwasanaeth sy'n cael ei reoli gan tcp_wrappers os yw \\fIarg"
-"\\fP = ALL. Dim ond rhai lleol\n"
-"os\\fIarg\\fP = LOCAL a dim os \\fIarg\\fP = NONE. I gnaiat谩u'r "
-"gwasanaethausydd angen defnyddiwch /etc/hosts.allow\n"
-"(gw. hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Ffeil/_Agor"
#: ../../security/help.pm:1
#, c-format
@@ -13381,1087 +13000,821 @@ msgstr ""
"Mae'r ymresymiad yn pennu os oes gan y defnyddiwr ganiat谩d i gysylltu\n"
"gyda'r gwasanaethwr X porth tcp 6000 neu beidio."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Ymresymiadau: (arg, listen_tcp=None)\n"
-"\n"
-"Caniat谩u/Gwrthod cysylltiadau X. Ym. cyntaf pennu'r hyn sy'n digwydd\n"
-"aochr y cleient: ALL (caniat谩u pob cysylltiad), LOCAL (dim ond\n"
-"cysylltiadau lleol) a NONE (dim cysylltiadau)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Caniat谩u/Gwrthod rhestr defnyddwyr ar y system ar rheolwyr arddangos (kdm "
-"and gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod mewngofnodi gwraidd uniongyrchol."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod mewngofnodi gwraidd pell"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod ailgychwyn cyfrifiadur gan ddefnyddiwr y consol."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"Os yw \\fIarg\\fP = ALL caniat谩 /etc/issue a /etc/issue.net i fodoli. Os yw "
-"\\fIarg\\fP = NONE\n"
-"dim materion heblaw caniat谩u /etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "Lleoliad ffeil auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod awtofewngofnodi."
+msgid "Open Firmware Delay"
+msgstr "Agor Oedi Cadarnwedd"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod atsain icmp."
+msgid "Hungary"
+msgstr "Hwngari"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod darlledu icmp atsain."
+msgid "Total progess"
+msgstr "Cyfanswm y cynnydd"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Ymredymiadau: (arg)\n"
-"\n"
-"Ganiat谩u/Gwrthod negeseuon gwall IPv4 ffug."
+msgid "Color configuration"
+msgstr "Ffurfweddiad lliw"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Gweinyddwr Diogelwch (mewngfnodi neu e-bost)"
+msgid "New Zealand"
+msgstr "Seland Newydd"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Lefel diogelwch"
+"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
+"bob nos"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Dewiswch lefel diogelwch"
+msgid "please choose the date to restore"
+msgstr "dewiswch y data i'w adfer"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Dewisiadau Sylfaenol DrakSec"
+msgid "Switching from ext2 to ext3"
+msgstr "Newid o ext2 i ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gae毛dig ac "
-"mae nodweddion diogelwch ar eu huchaf."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
-"bosibl.\n"
-"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
-"derbyn\n"
-"cysylltiad gan amryw o gleientiaid. Sylwer: os maei cleient yn unig yw eich "
-"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
+msgid "Netherlands Antilles"
+msgstr "Netherlands Antilles"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
-"bob nos"
+msgid "Browse to new restore repository."
+msgstr "Pori i'r ystorfa newydd adferwyd"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
-"cael ei gysylltu 芒'r Rhyngrwyd fel cleient."
+"\n"
+" Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Mae'r dewin yn caniat谩u i chi osod argraffyddion lleol neu bell i'w "
+"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
+"rhwydwaith.\n"
+"\n"
+"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
+"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
+"gyrwyr a mathau o gysylltiadau argraffyddion."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Mae'r cyfrinair wedi ei alluogi, ond ni argymhellir ei ddefnyddio fel "
-"cyfrifiadur rhwydwaith."
+msgid "and %d unknown printers"
+msgstr "a %d argraffydd anhysbys"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Rhaid defnyddio'r lefel hwn gyda gofal. Mae'n gwneud eich system yn haws ei\n"
-"ddefnyddio ond mae'n sensitif iawn: rhaid peidio defnyddio'r peiriant i'w\n"
-"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
+"Mae gan brosesyddion Pentium cynnar wall yn eu prosesydd pwynt arnofio nad "
+"yw'n ymgyrraedd 芒'r cywirdeb angenrheidiol wrth berfformio Floating point "
+"DIVision (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoia"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgr卯n nesaf."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Uwch"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Uchel"
+msgid "Please give a user name"
+msgstr "Rhowch enw defnyddiwr"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Gwael"
+msgid "Enable CD Boot?"
+msgstr "Galluogi cychwyn o CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Croeso i Crackers"
+msgid " enter `void' for void entry"
+msgstr "rhowch'gwag' am gofnod gwag"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
+msgid "on Hard Drive"
+msgstr "ar Ddisg Caled"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "Cysylltiad Winmodem l"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Mae /etc/hosts.allow and /etc/hosts.deny wedi eu ffurfweddu - dim newid"
+"\n"
+"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
+"\n"
+"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
+"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
+"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Mae angen creu /etc/dhcpd.conf yn gyntaf"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Ymresymiadau: (arg)\n"
+"\n"
+"Gosod hyd hanes cyfrinair i rwysstro ailddefnyddio'r cyfrinair."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Aeth rhywbeth o'i le! - ydy mkisofs wedi ei osod?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nawr mae modd i chi redeg Xawtv (o dan XWindows)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "%s yw'r delwedd ISO etherboot"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Does dim gyrrwr disg meddal ar gael!"
+msgid "%s on %s"
+msgstr "%s ar %s"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Mae modd tynnu'r disg meddal nawr"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"Mae GNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)\n"
+"a'i drosi i amser lleol yn 么l y parth amser rydych wedi ei ddewis.\n"
+"Mae'n bosib dad-ddewis hyn drwy ddad-ddewis \"Cloc caledwedd wedi ei\n"
+"osod i GMT\" fel bod y cloc caledwedd yr un a chloc y system yr un peth.\n"
+"Mae hyn yn ddefnyddiol pan fo'r peiriant yn westai i system arall megis\n"
+"Windows.\n"
+"\n"
+"Bydd y dewis \"Cydamseriad amser awtomatig\" yn rheoli'r cloc yn awtomatig\n"
+"drwy gysylltu 芒 gwasanaethwr amser ar y Rhyngrwyd. Yn y rhestr sy'n cael ei\n"
+"gynnig dewiswch yr agosaf atoch. Rhaid i'ch cyswllt 芒'r we fod yn gweithio\n"
+"i hyn ddigwydd. Bydd yn gosod ar eich peiriant wasanaethwr amser fydd\n"
+"o ddewis yn medru cael ei ddefnyddio gan beiriannau eraill ar eich "
+"rhwydwaith."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Maethu cael mynediad i'r disg meddal!"
+msgid "Which is your timezone?"
+msgstr "Pa un yw eich parth amser?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Mewnosodwch ddisg meddal:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Ysgrifenu ffurfweddu"
+msgid "The system is now connected to the Internet."
+msgstr "Mae'r system wedi cysylltu 芒'r Rhyngrwyd."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Pwll Cyfeiriad IP dynameg"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia and the South Sandwich Islands"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Tynnwyd y rhanfwyaf o'r gwerthoedd\n"
-"hyn o'ch system ar waith.\n"
-"Medrwch eu newid yn 么l y galw."
+msgid "Japan (broadcast)"
+msgstr "Siapan (darlledu)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr dhcpd"
+msgid "Mozambique"
+msgstr "Mozambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Diwedd Amrediad IP:"
+msgid "Icon"
+msgstr "Eicon"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Cychwyn Amrediad IP:"
+msgid "Please choose what you want to backup"
+msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Enwi Gwasanaethwr:"
+msgid "256 colors (8 bits)"
+msgstr "256 lliw (8 did)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Enw Parth:"
+msgid "Read-write"
+msgstr "Darllen-ysgrifennu"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Cyfeiriad Darlledu:"
+msgid "Size: %s\n"
+msgstr "Maint: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Masg Isnet"
+msgid "Hostname: "
+msgstr "Enw gwesteiwr:"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Llwybryddion:"
+msgid "Chunk size %s\n"
+msgstr "Maint darn %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Build the future of Linux!"
+msgstr "Adeiladu dyfodol Linux!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Isnet:"
+msgid "Local Printer"
+msgstr "Argraffydd Lleol"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Mae angen cychwyn y Rheolwr Dangosydd i'r newid ddigwydd.\n"
-"(ailgychwyn gwasanaeth dm - yn y consol)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Ffurfweddu dhcpd..."
+" Hawlfraint (C) 2001-2002 MandrakeSoft gan DUPONT Sebastien <dupont_s"
+"\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Diddymu Cleient"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Golygu Cleient"
+msgid "ADSL connection"
+msgstr "Cysylltiad ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Ychwanegu Cleient -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Caniat谩u Cleientiaid Tenau"
+msgid "Error!"
+msgstr "Gwall!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Cleient Tenau"
+msgid "cable connection detected"
+msgstr "canfyddwyd cysylltiad cebl"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Heb greu delweddau cychwyn y rhwyd!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Gwrthodwyd caniat芒d wrth drosglwyddo %s i %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "math: %s"
+msgid "/_Report Bug"
+msgstr "/_Adrodd ar Wallau"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Dileu Defndyddiwr"
+msgid "Resize"
+msgstr "Newid maint"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Pob Defnyddiwr -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"Mae !!! yn dangos bod y cyfrinair yng nghronfa ddata'r system yn\n"
-"wahanol i'r un yng ngronfa ddata'r Gwasanaethwr Terfynell.\n"
-"I fewngofnodi i'r Gwas.Terfynell dileu/ail ychwnaegu'r defnyddiwr."
+msgid "Please enter the device name to use for backup"
+msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Dileu Pob NBI"
+msgid "Resolution: %s\n"
+msgstr "Cydraniad: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Dileu"
+msgid "matching"
+msgstr "cydweddu"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Bydd hyn yn cymryd rhai munudau"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
+"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
+"cychwyn yn cydweddu gyda'r cyfrwng Gosod (cr毛wch ddisg cychwyn meddal newydd)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Adeiladu pob cnewyllyn -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
+"yn\n"
+"\"ttyS0\" yn GNU/Linux, e.e."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Heb ddewis NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Adeiladau NIC unigol -->"
+msgid "Connect to the Internet"
+msgstr "Cysylltu 芒'r We"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Heb ddeiwis cnewyllyn"
+msgid "Use existing partitions"
+msgstr "Defnyddiwch y rhaniadau cyfredol"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Adeiladu'r cnewyllyn gyfan -->"
+msgid "Canadian (Quebec)"
+msgstr "Canada (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Cychwyn yr ISO"
+msgid "Mouse device: %s\n"
+msgstr "Dyfais llygoden: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disg Meddal Cychwyn"
+msgid "Reselect correct fonts"
+msgstr "Ailddewis y ffontiau cywir"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"Trosolwg drakTermServ\n"
-"\t\t\t \n"
-" - Crea Delwedd Cychwynydd Galluogi Etherboot:\n"
-" \t\tI gychwyn y cnewyllyn drwy etherboot, rhaid creu delwedd "
-"cnewyllyn/initrdrd arbennig.\n"
-" \t\tmae tmkinitrd-net yn gwneud llawer o'r gwaith ac mae drak "
-"termServ yn rhyngwyneb graffigol iddo\n"
-" \t\ti gynorthwyo rheoli/addasuto help manage/customize these "
-"images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"disgrifiad o'r dewisiadau:\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
+"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
+"hanfon at y gwasanaethwr.\n"
+"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
+"cyn ei anfon i'r gwasanaethwr.\n"
"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"\n"
-" Diolch:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
+"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
+"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
+"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
+"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Hawlfraint (C) 2002 MandrakeSoft\n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Rydym am ffurfweddu cysylltiad %s"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Ychwanegu/Dileu Cleientiaid"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corfforaethol"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Ychwanegu/Diddymu Defnyddwyr"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" cydraniad XFdrake"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Awto ganfod argraffydd"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "methu cnafod unrhyw ffontiau.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Delweddau Cychwyn y Rhwyd"
+msgid "Language"
+msgstr "Iaith"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "Dewis model yr argraffydd"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Atal y Gwasanaethwr"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Wedi newid math raniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Cychwyn y Gwasanaethwr"
+msgid "%d seconds"
+msgstr "%d eiliad"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Analluogi'r Gwasanaethwr"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Rhowch ddisg meddal yng ngyrrwr %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Galluogi'r Gwasanaethwr"
+msgid "A valid URI must be entered!"
+msgstr "Rhaid cynnig URI dilys!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr Terfynell Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Wedi canfod rhyngwyneb \"%s\", hoffech chi ei ddefnyddio?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Tynnu'r eitem olaf"
+msgid "Re-configure interface and DHCP server"
+msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Ychwanegu eitem"
+msgid "Sound configuration"
+msgstr "Furfweddiad sain"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Awto Gosod"
+msgid "Photo test page"
+msgstr "Tudalen prawf llun"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
-"Medrwch ail chwarae eich gosodiad."
+msgid "Custom disk partitioning"
+msgstr "Rhannu disg unigol"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Llongyfarchiadau!"
+msgid "Enter Printer Name and Comments"
+msgstr "Rhowch Enw'r Argraffydd a Sylw"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Mae argraffyddion canlynol\n"
"\n"
-"Croeso\n"
-"\n"
-"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
+"%s%s\n"
+"wedi eu cysylltu'n uniongyrchol 芒'ch system"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Creu disg meddal awto gosod"
+msgid "type: %s"
+msgstr "math: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "llaw"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovacaidd (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
-"fydd gyda llaw"
+msgid "No Sound Card detected!"
+msgstr "Heb ganfod Cerdyn Sain!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "FFurfweddiad Camau Awtomatig"
+msgid "Mouse Port"
+msgstr "Porth Llygoden"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "ail chwarae"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Mae angen cychwyn y Rheolwr Dangosydd i'r newid ddigwydd.\n"
+"(ailgychwyn gwasanaeth dm - yn y consol)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Gwasanaethwr Ftp"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
-"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
-"\n"
-"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
-"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
-"gwerthoedd.\n"
+"Ymresymiadau: (arg)\n"
"\n"
-"Ydych chi eisiau parhau?\n"
-"?"
+"Galluogi/Analluogi gwiriad diogelwch msec bob awr."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Ffurfweddwr Awto-Osod"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "trosi ffontiau pfm"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Math o fws mae eich llygoden wedi cysylltu iddi"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Gwall!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Ymresymiad: (size)\n"
"\n"
-"Anawsterau Adfer Ffeiliau wrth gefn\n"
-"\n"
-"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
-"ffeiliau wrth gefn cyn eu hadfer.\n"
-"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
-"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
-"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
-"data wrth gefn gyda llaw.\n"
+"Gosod maint hanes gorchymyn cragen. Gwerth -1 yn golygu diderfyn."
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
-"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
-"hanfon at y gwasanaethwr.\n"
-"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
-"cyn ei anfon i'r gwasanaethwr.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Disgrifiad:\n"
+"I grynhoi, bydd DrakX yn cyflwyno crynodeb o'r wybodaeth amrywiol\n"
+"sydd ganddo am eich system. Yn ddibynnol ar eich caledwedd, mae'n bosib\n"
+"bod gennych rywfaint o'r nodweddion canlynol. Mae pob cofnod yn cynnwys\n"
+"eitem ffurfweddadwy, a chrynodeb o'r ffurfweddiad presennol. Cliciwch ar y\n"
+"botwm \"Ffurfweddu\" perthnasol i'w newid.\n"
"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t-Ffeiliau defnyddwyr,\n"
-"\t-Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
+" *\"Bysellfwrdd\": gwirio ffurfweddiad map y bysellfwrdd a'i newid os oes "
+"angen.\n"
"\n"
-" Mae Drackbackup yn caniat谩u i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t-Rsync.\n"
-"\t- Webdav.\n"
-"\t- T芒p.\n"
+" *\"Gwlad\": gwirio'r dewis iaith. Os nad ydych yn y wlad hon, cliciwch y "
+"botwm\n"
+"\"Ffurfweddu\" a dewis un arall. Os nad yw eich gwlad ar y rhestr gyntaf "
+"i'w\n"
+"dangos, cliciwch y botwm \"Rhagor\" am y rhestr gyflawn o wledydd.\n"
"\n"
-" Mae Drakbackup yn caniat谩u i chi adfer eich system i\n"
-" gyfeiriadur o ddewis y defnyddiwr.\n"
+" *\"Parth Amser\": Mae DrakX yn dyfalu eich parth amser yn 么l y wlad rydych\n"
+"wedi ei dewis. Mae modd clicio ar y botwm\"Ffurfweddu\" i'w gywiro.\n"
"\n"
-" Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-" /var/lib/drakbackup directory\n"
+" *\"Llygoden\": gwirio ffurfweddiad y llygoden bresennol a chlicio ar y "
+"botwm\n"
+"i'w newid os oes angen.\n"
"\n"
-" Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
+" \"Argraffydd\": bydd clicio ar y botwm \"Ffurfweddu\" yn agor y dewin\n"
+"ffurfweddu argraffydd. Darllenwch y pennawd yn y \"Starter Guide\" ar\n"
+"sut i osod argraffydd newydd. Mae'r rhyngwyneb yn debyg i'r un ar gyfer\n"
+"ei osod yn y man cyntaf.\n"
"\n"
+" *\"Cerdyn sain\": os oes cerdyn sain wedi ei ganfod ar eich system bydd\n"
+"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sy'n cael ei\n"
+"ddangos yw'r un sydd ar eich system, yna cliciwch y botwm a dewis\n"
+"gyrrwr arall.\n"
"\n"
-"Camau wrth adfer:\n"
-" \n"
-" Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-" eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-" ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-" gadw wrth gefn cyn adfer.\n"
+" *\"Rhyngwyneb Graffigol\": fel rheol bydd DrakX yn gosod eich rhyngwyneb\n"
+"i gydraniad \"800x600\" neu \"1024x768\". Os nad yw hyn yn addas ar\n"
+"eich cyfer cliciwch y botwm \"Ffurfweddu\" i'w newid.\n"
+"\n"
+" *\"Cerdyn Teledu\": os oes cerdyn teledu wedi ei ganfod ar eich system\n"
+"bydd yn cael ei ddangos yma. Os oes gennych gerdyn ac nid yw wedi cael\n"
+"ei ganfod, cliciwch \"Ffurfweddu\" i geisio ei ffurfweddu 芒 llaw.\n"
+"\n"
+" *\"Cerdyn ISDN\": os oes cerdyn ISDN wedi ei ganfod ar eich system bydd\n"
+"yn cael ei ddangos yma. Mae modd clicio ar \"Ffurfweddu\" i newid y\n"
+"paramedrau sy'n gysylltiedig 芒'r cerdyn.\n"
+"\n"
+" *\"Rhwydwaith\": os ydych am ffurfweddu eich mynediad i'r Rhyngrwyd neu\n"
+"eich rhwydwaith lleol.\n"
+"\n"
+" *\"Lefel Diogelwch\": mae modd ail ddiffinio'r lefel diogelwch osodwyd yn\n"
+"flaenorol ().\n"
"\n"
+" *\"Mur Cadarn\": mae'n syniad da gosod mur cadarn i'ch amddiffyn rhag\n"
+"ymyriadau os ydych yn bwriadu cysylltu eich cyfrifiadur 芒'r Rhyngrwyd.\n"
+"Darllennwch y bennod perthnasol yn y \"Starter Guide\" am fanylion\n"
+"gosodiadau mur cadarn.\n"
"\n"
+" *\"Cychwynnydd\": os hoffech newid ffurfweddiad eich cychwynnydd\n"
+"cliciwch y botwm honno. Ar gyfer defnyddwyr profiadol.\n"
+"\n"
+" *\"Gwasanaethau\": yma bydd modd i chi wneud man newidiadau i'r\n"
+"gwasanaethau sy'n cael eu rhedeg ar eich cyfrifiadur. Os ydych yn\n"
+" bwriadu defnyddio'r cyfrifiadur fel gwasanaethwr mae'n syniad da\n"
+"darllen y gosodiadau'n fanwl."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comoros"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" yn diweddaru 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"\n"
+"\n"
+"\n"
+"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
+"\n"
+"\n"
+"Pwyswch Iawn i barhau."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Modd Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "UDA (cabl)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Hawlfraint (C) 2001-2002 MandrakeSoft gan DUPONT Sebastien <dupont_s"
-"\\@epita.fr>"
+"Methu ailgychwyn LiLo!\n"
+"Cychwyn \"lilo\" fel gwraidd ar y linell orchymyn i gwblhau gosod thema "
+"LiLo'n llawn."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Llygoden 3 Botwm Generig"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Dewis cyfrwng arall i adfer ohono"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Rheolwr Meddalwedd"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14473,17 +13826,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"disgrifad o adfer:\n"
@@ -14508,5049 +13863,5732 @@ msgstr ""
"\\n\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"- Ffeiliau system Cadw wrth Gefn\n"
-" \n"
-"\tMae'r dewis hwn yn caniat谩u i chi gadw wrth gefn eich\n"
-"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
-"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniat谩u i chi ddewis pob defnyddiwr\n"
-"\trydych am gadw wrth gefn ar eu cyfer.\n"
-"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
-"\t porwr.\n"
-" \n"
-"- Cadw Ffeiliau Eraill wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniat谩u i chi ychwanegu mwy\n"
-"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
-"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
-"\tcynyddol.\t\t\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniat谩u i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr "\n"
+msgid "Re-submit"
+msgstr "Ail-gyflwyno"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Yma mae Drakbackup yn caniat谩u i chi newid:\n"
-"\n"
-" - Y modd cywasgu:\n"
-" \n"
-" Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
-" cywasgu eich data'n well na gzip (tua 2-10%%).\n"
-" Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
-" angen mwy o amser ar y modd cywasgu hwn (tua 1000%% yn fwy).\n"
-"\n"
-"- Y modd diweddaru:\n"
-"\n"
-" Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
-" nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
-" eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
-" \n"
-"- Y modd .backupignore\n"
-" Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
-" yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
-" ar wah芒n i: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
+msgid "CD in place - continue."
+msgstr "CD yn ei le - ewch ymlaen"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Adfer"
+msgid "Network & Internet"
+msgstr "Rhwydwaith a'r Rhyngrwyd"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Cadw wrth Gefn Nawr"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lithuenaidd \"ffonetig\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Ffurfweddiad Uwch"
+msgid "Net Boot Images"
+msgstr "Delweddau Cychwyn y Rhwyd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Ffurfweddiad y Dewin"
+msgid "Sharing of local scanners"
+msgstr "Rhannu sganwyr lleol"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Methodd ymholiad Plug'nPlay. Dewiswch y dangosydd cywir"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
+msgid "Services and deamons"
+msgstr "Gwasanaethau a daemonau"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Ffurfweddiad Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Mae enw'r gwesteiwr pell ar goll!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Cyfanswm Cynydd"
+msgid "with /usr"
+msgstr "gyda /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Anfon ffeiliau..."
+msgid "Network"
+msgstr "Rhwydwaith"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "anfon ffeil drwy FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Awtoganfod argraffyddion sy'n gysylltiedig 芒 pheiriannau'n rhedeg Microsoft "
+"Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Cadw'r ffeiliau eraill wrth gefn"
+msgid "This password is too simple"
+msgstr "Mae'r cyfrinair yn rhy syml"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slofacaidd (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Ffeiliau System Cadw wrth Gefn"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Dyw newid a chreu mewn ieithoedd gwahanol megis Perl, Python, C and C++ "
+"erioed wedi bod mor hawdd diolch i GNU gcc 3 neu'r amgylcheddau datblygiadol "
+"Cod Agored gorau."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "O dan ddatblygiad...arhoswch."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Ni chanfyddwyd y ffeil ffurfweddu \n"
-"cliciwch Dewin neu Uwch."
+"Trosglwyddo \n"
+"Nawr"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Dewiswch y data i'w gadw wrth gefn..."
+msgid "Use daemon"
+msgstr "Defnyddiwch ddaemon"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
+msgid "Authentication"
+msgstr "Dilysu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Dewiswch y data i'w adfer..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Mae'r pecynnau canlynol angen eu gosod:\n"
+msgid "Additional CUPS servers: "
+msgstr "Gasanaethwyr CUPS ychwanegol:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Gwall wrth anfon ffeil drwy FTP.\n"
-" Cywirwch eich ffurfweddiad FTP."
+"Dewiswch un o'r argraffyddion sydd wedi eu awtoganfod o'r rhestr neu rhowch "
+"yr enw gwesteiwr neu IP a'r rhif porth dewisol (9100 yw'r rhagosodedig) i'r "
+"meysydd mewnbwn."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Lle'r ydych am osod %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Adfer drwy'r Rhwydwaith"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algeria"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Maint intrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Gwall wrth ddefnyddio sendmail\n"
-" chafodd eich adroddiad e-bost mo'i anfon\n"
-" Ffurfweddwch eich sendmail"
+"Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
+"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
+"ar eich cyfer."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Nesaf"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Cynt"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Gorffen"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[DEWIS]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Adeiladu Cadw wrth Gefn"
+msgid "Setting Default Printer..."
+msgstr "Gosod yr Argraffydd Rhagosodedig"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Adfer Cynnydd"
+msgid "Interface %s (using module %s)"
+msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Adfer o'r Catalog"
+msgid "Name: %s\n"
+msgstr "Enw: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Pori i'r ystorfa newydd adferwyd"
+msgid "Generating preview ..."
+msgstr "Cynhyrchu rhagolwg..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD yn ei le - ewch ymlaen"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Dylai Frqu gael rhagosodiad k, M neu G (ee \"2.46G\" am donfedd 2.46 GHz ), "
+"neu ychwanegu '0' (sero)."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Adfer Dewisol"
+msgid "serial"
+msgstr "cyfresol"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Adfer pob cadw wrth gefn"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Methodd Adfer..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Adferwyd ffeiliau..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Estynnwch yr eitemau gorau gan bartneriaid strategol Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Llwybr neu Fodiwl angenrheidiol"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
+"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x, e.e. "
+"'0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Mae angen enw gwesteiwr"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mae Mandrake Linux 9.1 yn cynnig Canolfan Rheoli Mandrake, offeryn pwerus i "
+"addasu eich cyfrifiadur i'ch defnydd personol chi. Gallwch addasu elfennau "
+"megis lefelau diogelwch, offer ymylol (sgr卯n, llygoden, bysellfwrdd...), "
+"cysylltiad 芒'r Rhyngrwyd a llawer mwy!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Mae angen enw defnyddiwr"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Mae angen cyfrinair"
+msgid "Use ``Unmount'' first"
+msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Llwybr Gwesteiwr neu Fodwil "
+msgid "Installing mtools packages..."
+msgstr "Gosod pecynnau mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Enw Gwesteiwr"
+msgid "You must specify a root partition"
+msgstr "Rhaid pennu rhaniad gwraidd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Adfer drwy Protocol Rhwydwaith: %s"
+msgid "first step creation"
+msgstr "creu'r cam cyntaf"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Adfer drwy'r Rhwydwaith"
+msgid "Both Shift keys simultaneously"
+msgstr "Y ddwy fysell Shift gyda'i gilydd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Nid yr label t芒p cywir. T芒p wedi ei labelu %s."
+msgid "Select a scanner model"
+msgstr "Dewiswch model sganiwr"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Rhowch y t芒p gyda label cynnwys%s\n"
-"yn yr gyrrwr t芒p %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Adfer o D芒p"
+msgid "Drakbackup Configuration"
+msgstr "Ffurfweddiad Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Nid yr label CD cywir. Disg wedi ei labelu %s."
+msgid "Save as.."
+msgstr "Cadw fel..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Rhowch yr CD gyda label cynnwys%s\n"
-"yn yr gyrrwr CD o dan bwynt gosod /mnt/cdrom"
+"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
+"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Adfer o'r CD"
+msgid "Korea (North)"
+msgstr "Corea (Gogledd)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Heb ganfod y ffeiliau wrth gefn yn %s."
+msgid "Autologin"
+msgstr "Awtomewngofnodi"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Newid\n"
-"Llwybr Adfer"
+msgid "System configuration"
+msgstr "Ffurfweddu'r system"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Cyfrinair Gweinyddol y Parth"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Adfer y Dewis\n"
-"Ffeiliau"
+"Gwnewch y cyfrifiadur yn addas i'ch anghenion diolch i'r 11 rhyngwyneb "
+"defnyddiwr Mandrake Linux y mae modd eu newid yn helaeth: KDE 3.1, Gnome "
+"2.2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Ffurfweddu argraffydd ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Adfer Cofnod\n"
-"Catalog Ddewiswyd"
+"I siugrhau cywirdeb data'r rhaniad ar 么l ailfeintiol'r rhaniad(au),bydd \n"
+"gwiriadau'r system ffeiliau'n cael eu gwneud wrth i chi ail gychwyn Windows "
+"(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
-"yn unig )"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "os wedi ei osod i iawn, gwirio yn erbyn y gronfa ddata rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "dewis llwybr arall i adfer ( yn lle / )"
+msgid "Virgin Islands (British)"
+msgstr "Virgin Islands (British)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Adfer Arall"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Adfer Defnyddwyr"
+msgid "click here if you are sure."
+msgstr "cliciwch yma os ydych yn siwr."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Adfer y system"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Ni chanfyddwyd y ffeil ffurfweddu \n"
+"cliciwch Dewin neu Uwch."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled.\n"
+"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
+"ar gyfer y rhan fwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
+"ol eiaf\n"
+"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
+"fyddwch\n"
+"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
+"arall,\n"
+"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
+"un\n"
+"rhaniad Linux ar gael)\n"
+"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
+"\n"
+"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
+"\"rhif rhaniad\" (e.e, \"hda1\").\n"
+"\n"
+"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
+"\"sd\" os mai SCSI yw'r disg caled.\n"
+"\n"
+"Mae \"Rhif Disg Caled\" yn llythyren ar 么l \"hd\" neu \"sd\". Ar gyfer\n"
+"disg caled IDE mae:\n"
+"\n"
+" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
+"\n"
+" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
+"\n"
+" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
+"\n"
+" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
+"\n"
+"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
+"golygu\n"
+"\"ID SCSI ail isaf\", ag ati."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Cyfrwng Arall"
+msgid "Remove"
+msgstr "Tynnu"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Dewis cyfrwng arall i adfer ohono"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Adfer o'r Ddisg Caled."
+msgid "Pipe job into a command"
+msgstr "Peipio'r gwaith i orchymyn"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "enw dyfais deinamig yn cael ei gynhyrchu gan incore kernel devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Rhowch y maint mwyaf\n"
-"i'w ganiat谩u ar gyfer Drakbackup"
+msgid "Yes"
+msgstr "Iawn"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
+msgid "Which protocol do you want to use?"
+msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "dewiswch y data i'w adfer"
+msgid "Restore Progress"
+msgstr "Adfer Cynnydd"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
+msgid "Estonia"
+msgstr "Estonia"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn 么l y defnyddwyr, sy'n "
-"bwysig )"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Dewis y gwesteiwr ddylai'r sganiwr lleol fod ar gael iddynt:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Iawn i adfer ffeiliau eraill"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
+"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
+"rhaniadau estynedig "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Adfer y Furfweddiad"
+msgid "Channel"
+msgstr "Sianel"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Ei adfer yn Llwyddiannus ar %s "
+msgid "Add"
+msgstr "Ychwanegu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Mae eich dewis data wedi ei "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Nid oes Rhannu Cysylltiad 芒'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
+msgid " Error while sending mail. \n"
+msgstr " Gwall wrth anfon e-bost. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
+msgid "Keyboard"
+msgstr "Bysellfwrdd"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Rhestr o ddata llwgr:\n"
-"\n"
+"Rhowch yr CD gyda label cynnwys%s\n"
+"yn yr gyrrwr CD o dan bwynt gosod /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Rhestr o ddata i'w adfer:\n"
-"\n"
+"Dylai'r raddfa gael rhagosodiad K, M neu G (e.e.\"11M\" am 11M), neu "
+"ychwanegi '0' (sero)."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Rhwydwaith drwy webday.\n"
+msgid "Please wait, setting security level..."
+msgstr "Arhoswch, gosod lefle diogelwch..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Rhwydwaith drwy rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 yw'r platfform datblygu gorau"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rhwydwaith drwy SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Ffurfweddu dyfais rhwydwaith %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rhwydwaith drwy FTP.\n"
+msgid "activated"
+msgstr "gweithredu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-T芒p \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Dewiswch pa rhyngwyneb rhwydwaith i'w ddefnyddio ar gyfer y gwasanaethwr "
+"dhcp."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Canfod pecynnau i'w uwchraddio"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disg Caled.\n"
+msgid "Mount point: "
+msgstr "Pwynt gosod:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon (%s) i gynnwys :\n"
+msgid "parse all fonts"
+msgstr "pob ffont"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
+msgid "With X"
+msgstr "Gyda X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Ffurfweddiad amlben"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
+msgid "No browser available! Please install one"
+msgstr "Dim porwr ar gael! Gosodawch un"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Cadw'r newid?\n"
+"Y ffurfweddiad presenol yw:\n"
"\n"
-"-Dewisiadau:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t enw defnyddiwr:%s\n"
-"\t\t ar lwybr: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Cadw drwy %s ar westeiwr: %s\n"
+"Mae'r protocol rwho'n caniat谩u i ddefnyddwyr pell gael rhestr o'r \n"
+"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
+"daemon rwho (yn debyg i fysedd)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tDileu=%s"
+msgid "Domain name"
+msgstr "Enw parth"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Cadw i d芒p ar ddyfais: %s"
+msgid "Sharing of local printers"
+msgstr "Rhannu argraffyddion lleol"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr "(aml-sesiwn)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "ar ddyfais: %s"
+msgid "Available printers"
+msgstr "Argraffyddion ar gael"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Gwag"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"-Llosgi i CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Dileu ffeiliau tar y disg caled wedi'r cadw wrth gefn.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"Cadw ar Ddisg caled ar lwybr: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Ffeiliau Eraill: \n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (sef X System) yw calon rhyngwyneb graffigol GNU/Linux a'r hyn mae'r\n"
+"holl amgylcheddau graffigol (KDE, Gnome, AterStep, WindowMaker, etc)\n"
+"sy'n dod gyda Mandrake Linux yn dibynnu arno.\n"
"\n"
-"- Ffeiliau Defnyddiwr:\n"
+"Byddwch yn derbyn rhestr o baramedrau gwahanol i'w newid i gael\n"
+"y dangosiad graffigol gorau: Cerdyn Graffig\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich cerdyn.\n"
+"\n"
+" Mewn achos lle mae gwasanaethwyr eraill i'w cael i'ch cerdyn, gyda\n"
+"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gwasanaethwr gorau\n"
+"ar eich cyfer.\n"
+"\n"
+"\n"
+"Dangosydd\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y dangosydd sy'n gysylltiedig 芒'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich dangosydd.\n"
+"\n"
+"Cydraniad\n"
+"\n"
+" Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
+"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
+"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
+"ar y dangosydd.\n"
+"\n"
+"Prawf\n"
+"\n"
+" bydd y system yn ceisio agor sgr卯n graffigol yn unol 芒'r cydraniad "
+"dewisol.\n"
+"Os ydych yn gweld y neges yn ystod y prawf ac ateb \"Iawn\", yna bydd\n"
+"DrakX yn symud ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges nesaf\n"
+"mae'n golygu fod rhan o'r drefn awtoganfod yn anghywir a bydd y prawf\n"
+"yn dod iben ar 芒l 12 eiliad, gan ddod a chi n么l i'r ddewislen. Newidiwch y\n"
+"gosodiadau nes i chi gael y sgr卯n i edrych yn iawn.\n"
+"Dewisiadau\n"
+"\n"
+" Yma cewch ddewis p'un ai i drefnu i'ch cyfrifiadur newid yn awtomatig i\n"
+"rhyngwyneb graffigol wrth gychwyn. Yn amlwg byddwch angen ticio \"Iawn\"\n"
+"os yw eich peiriant i weithredu fel gwasanaethwr, neu os na fuoch yn\n"
+"llwyddiannus yn ffurfweddu'r dangosydd."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "lled testun"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Lle'r ydych am osod dyfais %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Les rhagosodedig (mewn eiliadau)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Rhyngwyneb \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Gyda dogfennaethelfennol (argymhellir!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 botwm"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Ffeiliau System: \n"
+"Mae yna %d argraffydd anhysbys wedi eu cysylltu'n uniongyrchol 芒'ch system"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Prawf"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Ymredymiadau: (arg)\n"
"\n"
-"Ffynhonell Cadw wrth Gefn:\n"
+"Ganiat谩u/Gwrthod mewngofnodi gwraidd uniongyrchol."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Dewis defnyddwyr gyda llaw"
+msgid "Korea"
+msgstr "Corea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Defnyddwyr Cadw wrth Gwfn"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Eich dewis? (rhagosodedig `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "System cadw wrth gefn"
+msgid "Raw printer"
+msgstr "Argraffydd bras"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Enw swyddogol gwerthwr y cpu"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "ar Ddyfais T芒p"
+msgid "Vendor"
+msgstr "Gwerthwr"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "ar CDROM"
+msgid "Interface %s"
+msgstr "Rhagwyneb %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "ar draws Rhwydwaith"
+msgid "Configure mouse"
+msgstr "Ffurfweddu llygoden"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "ar Ddisg Caled"
+msgid "Choose the mount points"
+msgstr "Dewiswch y pwyntiau gosod"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
+msgid "OK"
+msgstr "Iawn"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Dewisiadau Eraill"
+msgid "Yugoslavian (latin)"
+msgstr "Iwgoslafaidd (lladin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Pryd"
+msgid "Installing"
+msgstr "Gosod"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Lle"
+msgid "Launch userdrake"
+msgstr "Cychwyn userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Beth"
+msgid "Is this an install or an upgrade?"
+msgstr "Gosod neu ddiweddaru?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Dileu ffeiliau tar y Disg Caled wedi cadw cyfrwng arall wrth gefn."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Cerdyn ISDN mewnol"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
+"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
+"ein tudalennau gwe \"Cymuned\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau. \n"
+"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
+"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
"\n"
-"Sylwer bod yr holl gyfrwn \"gwe\" yn defnyddio'r ddisg caled."
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Disg Caled.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Dewiswch y cyfrwng ar\n"
-"gyfer cadw wrth gefn..."
+"Mae'r cam hwn yn cael ei weithredu os oes hen raniad GNU/Linux wedi\n"
+"ei ganfod ar y cyfrifiadur.\n"
+"\n"
+"Bydd DrakX angen gwybod a ydych am osod o'r newydd neu uwchraddio\n"
+"system Mandrake Linux presennol.\n"
+"\n"
+" *\"Gosod\" Ar y cyfan, mae hwn yn tynnu'r hen system gyfan oddi ar eich\n"
+"cyfrifiadur. Os ydych am newid rhaniadau eich disgiau caled, neu newid y\n"
+"system ffeil, dylech ddewis hwn. Er hynny, yn ddibynnol ar eich trefn\n"
+"rhannu, mae modd atal peth o'ch data rhag cael ei ysgrifennu drosto gan\n"
+"y gosodiad newydd.\n"
+" *\"Uwchraddio\": mae'r dosbarth gosod hwn yn caniat谩u i chi ddiweddaru'r\n"
+"pecynnau sydd wedi eu gosod ar eich system Mandrake Linux. Bydd eich\n"
+"rhaniadau presenol a'ch data personol yn cael eu cadw. Bydd y rhan fwyaf\n"
+"o'r camau ffurfweddu ar gael fel gyda'r gosod arferol.\n"
+"\n"
+"Dylai defnyddio \"Uwchraddio\" weithio'n iawn ar systemau Mandrake Linux\n"
+"sy'n rhedeg systemau \"8.1\" neu'n ddiweddarach. Nid yw uwchraddio\n"
+"fersiynau cyn Mandrake Linux \"8.1\" yn cael ei gymeradwyo."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Argraffydd ar wasanaethwr CUPS pell"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Dewiswch faint o amser\n"
-"fydd rhwng pob cadw wrth gefn"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Methwyd 芒 thynnu argraffydd \"%s\" o Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Defnyddiwch ddaemon"
+msgid "delete"
+msgstr "dileu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "bob mis"
+msgid "here if no."
+msgstr "yma os nad."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "bob wythnos"
+msgid "DHCP host name"
+msgstr "Enw gwesteiwr DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "bob dydd"
+msgid "The maximum lease (in seconds)"
+msgstr "Les mewyaf (mewn eiliadau)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "bob awr"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Dewiswch ba borth cyfresol mae eich llygoden wedi cysylltu iddi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disg Caled / NFS"
+msgid "Did it work properly?"
+msgstr "A weithiodd hwnnw'n iawn?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "Gwael"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
+msgid "The DHCP start range"
+msgstr "Amrediad cychwyn DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Gwiriwch os ydych am dynnu eich t芒p ar 么l y cadw wrth gefn."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Gwiriwch os ydych am ddileu eich t芒p cyn y cadw wrth gefn."
+msgid "Unsafe"
+msgstr "Anniogel"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s sector"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Na"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Gwiriwch os ydych am ddefnyddio'r dyfais nad yw'n mynd n么l i'e ddechrau."
+"A yw eich argraffydd yn ddyfais amlbwrpas gan HP neu Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 gyda sganiwr, Sony IJP-V100), HP "
+"PhotoSmart neu HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Defnyddiwch d芒p i gadw wrth gefn"
+msgid "could not find any font.\n"
+msgstr "methu cnafod unrhyw ffontiau.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Heb ddiffinio dyfais CD!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Rhowch enw dyfais eich Ysgrifennwr CD\n"
-"ex: 0,1,0"
+msgid "Vertical refresh rate"
+msgstr "Graddfa adfywio fertigol"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDRAM"
+msgid "Entering step `%s'\n"
+msgstr "Cychwyn cam '%s\"\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr "Dileu Nawr"
+msgid "Removing %s ..."
+msgstr "Tynnu %s..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Gwiriwch os ydych am ddileu eich cyfrwng RW(Sesiwn 1af)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
+msgid "No printer"
+msgstr "Nid oes argraffydd"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Gwiriwch os ydych yn defnyddio CD amlsesiwn"
+msgid "alert configuration"
+msgstr "ffurfweddiad rhybudd"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Dewiswch maint eich gofod CD/DVD"
+msgid "NetWare Printer Options"
+msgstr "Dewisiadau Argraffydd NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Dewiswch eich dyfais CD/DVD\n"
-"(Gwasgwch Enter i drosglwyddo'r gosodiadau i feysydd eraill.\n"
-"Nid yw'r maes hwn yn angenrheidiol, dim ond offeryn i lanw'r ffurflen.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s Rhagolwg Croeso Cychwyn (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
+msgid "General"
+msgstr "Cyffredinol"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Angen enw gwesteiwr, enw defnyddiwr a chyfrinair"
+msgid "Printing system: "
+msgstr "System argraffu."
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Cofiwch y cyfrinair"
+msgid "Add a user"
+msgstr "Ychwanegu defnyddiwr"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your password"
-msgstr "Rhowch eich cyfrinair"
+msgid "Network configuration (%d adapters)"
+msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Rhowch eich mewngofnod"
+msgid "Mandatory package %s is missing"
+msgstr "Mae pecyn gorfodol %s ar goll"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Rhowch y cyfeiriadur(neu fodiwl) i osod y cadw\n"
-"wrth gefn ar y gwesteiwr hwn."
+msgid "Philippines"
+msgstr "Philippines"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Rhowch enw'r gwesteiwr neu'r IP"
+msgid "Ok"
+msgstr "Iawn"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Allweddi eraill (nid drakbackup)\n"
-"yn eu lle yn barod"
+msgid "Print Queue Name"
+msgstr "Enw Rhes Argraffu"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Ydych chi eisiau defnyddio aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusaidd"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-"Trosglwyddo \n"
-"Nawr"
+"Mae PDQ yn cynnal argraffyddion lleol, LDP pell, a Socket/TCP, yn unig.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Symud ffeiliau i'r rhaniad newydd"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Creu/Trosglwyddo\n"
-"allweddi wrth gefn ar gyfer SSH"
+"Ychwanegwch y gwasanaethwyr CUPS yr argraffwyr rydych am eu defnyddio. Bydd "
+"angen gwneud hyn dim ond os nad yw'r gwasanaethwyr yn darlledu eu gwybodaeth "
+"argraffu i'r rhwydwaith leol."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Defnyddiwch Expect ar gyfer SSH"
+msgid "Restore From Catalog"
+msgstr "Adfer o'r Catalog"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Dull Rhwyd:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Defnyddiwch cysylltiad rhwydwaith i gadw wrth gefn"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Defnyddwyr"
+msgid "group :"
+msgstr "grwp:"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "methodd gosod rhaniad %s yng nghyfeiriadur %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
+msgid "Lilo screen"
+msgstr "Sgr卯n Lilo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Tynnu'r Dewis"
+msgid "LILO with graphical menu"
+msgstr "Lilo gyda dewislen graffigol"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Peidio cynnwys storfa'r porwr"
+msgid "Estimating"
+msgstr "Amcangyfrif"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", argraffydd \"%s\" ar wasanaethwr SMB/Windows \"%s\""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Go on anyway?"
+msgstr "Mynd yn ein blaen beth bynnag?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
-"o'ch cyfeiriadur /etc."
+"Chwilio am y pecynnau sydd ar gael ac yn ailadeiladu cronfa ddata rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "Nid yw'n ymddangos fel cyfrwng cofnodi."
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
+msgid "Specify options"
+msgstr "Enwi dewisiadau"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
-"cyfeiriadur /etc.\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
+"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
+"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
+"SILO'n\n"
+"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
+"cychwyn\n"
+" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
+"adfer o\n"
+" fethiannau systemig sylweddol\n"
"\n"
-"Gwiriwch pob dewis sydd angen arnoch.\n"
+"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
+"gyrrwr\n"
+" cyntaf a chliciwch \"Iawn\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Nid oes modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Dewis ffeiliau"
+msgid "Norfolk Island"
+msgstr "Norfolk Island"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Methu creu catalog!"
+msgid "Theme installation failed!"
+msgstr "Methodd gosod y thema!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Gwall wrth anfon e-bost. \n"
+msgid "Nothing to do"
+msgstr "Dim i'w wneud"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy d芒p:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Defnyddiwch ar gyfer cylchol"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Offeryn Adross Gwall Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "defnyddiwch pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Symud ffeiliau i'r rhaniad newydd"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Uwch"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Trosglwyddo"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Swedaidd)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth gefn "
-"drwy FTP.\n"
+msgid "More Options"
+msgstr "Dewisiadau Eraill"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Dileu ffeiliau tar y Disg Caled wedi cadw cyfrwng arall wrth gefn."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"rhestr ffeil yrrwyd gan FTP: %s\n"
-" "
+"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
+"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
+"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
+"a dewisiadau ffurfweddu mwy pwerus."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Dim newid i'r ffeil wrth gefn"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
+msgid "Add Client -->"
+msgstr "Ychwanegu Cleient -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Cadw wrth gefn ffeiliau eraill..."
+msgid "Read carefully!"
+msgstr "Darllenwch yn ofalus!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Cynnydd Disg Caled wrth Gefn..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "Rhowch eich safon teledu a gwlad"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Ffeiliau system wrth gefn"
+msgid "Port"
+msgstr "Porth"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Dim t芒p yn %s!"
+msgid "No (experts only)"
+msgstr "Na (arbennigwyr yn unig)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Anhawsterau caniat芒d wrth gael mynediad i'r CD."
+msgid "No kernel selected!"
+msgstr "Heb ddeiwis cnewyllyn"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Bydd yn cymryd ychydig o amser i ddileu'r cyfrwng."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Nid cyfrwng dileuadwy!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Nid yw'n ymddangos fel cyfrwng cofnodi."
+msgid "The encryption keys do not match"
+msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Dim CDR/DVDR yn y gyrrwr!"
+msgid "Right \"Windows\" key"
+msgstr "Bysell \"Windows\" de"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "Method trosglwyddiad WebDaAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Mae safle pell WebDAV eisioes wedi cydamseru!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "os wedi ei osod i iawn, gwirio cyfrinair gwag y /etc/shadow."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Cyfanswm y cynnydd"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
+"芒 holl ddosbarthiad Mandrake Linux. Os ydych yn cytuno 芒'r holl amodau,\n"
+"cliciwch blwch \"Derbyn\". \n"
+"Os nad, ddiffoddwch eich cyfrifiadur."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+msgstr ""
+"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
+"presennol:\n"
"\n"
-"without being prompted for a password."
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Cydraniadau"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-"Roedd y trosglwyddiad yn llwyddiannus\n"
-"Efallai'r hoffechi wirio eich bod yn medru mewngofnodi i'r gwasanaether "
-"gyda:\n"
+"ffurfweddiadur drakfirewall\n"
"\n"
-"ssh -i %s %s\\@%s\n"
-"heb dderbyn cais am gyfrinair"
+"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
+"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
+"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "Nid yw %s yn ymateb"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Rhowch eich enw defnyddiwr, cyfrinair ac enw parth i gael mynediad i'r "
+"gwesteiwr."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Methu canfod %s ar %s"
+msgid "Remove selected host"
+msgstr "Tynnu'r gwesteiwr"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Gwrthodwyd caniat芒d wrth drosglwyddo %s i %s"
+msgid "Network configuration"
+msgstr "Ffurfweddiad y rhwydwaith"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Cyfrinair gwallus yn %s"
+msgid "No sharing"
+msgstr "Peidio rhannu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Dim cais am gyfrinair ar %s ym mhorth %s"
+msgid "Move selected rule down one level"
+msgstr "Symud y rheol i lawr un lefel"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "GWALL; methu taenu %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Bydd hyn yn cymryd amser i gynhyrchu'r allweddi"
+msgid "Please check if you are using a DVDR device"
+msgstr "Gwiriwch os ydych yn defnyddio dyfais DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+msgid "FATAL"
+msgstr "TERFYNNOL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-"\n"
-" Manylion Adroddiad DrakBackup \n"
-"\n"
+"Mae'r gwasanaethwr DHCP yn caniat谩u i gyfrifiaduron eraill gychwyn drwy "
+"ddefnyddio PXE ar ystod\n"
+"penodol o gyfeiriadau\n"
+"Y cyfeiriad rhwydwaith yw %s gan ddefnyddio netmask o %s\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Dileu"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Ymredymiadau: (arg)\n"
"\n"
-" Adroddiad Daemon DrakBackup \n"
-"\n"
-"\n"
+"Ganiat谩u/Gwrthod ailgychwyn cyfrifiadur gan ddefnyddiwr y consol."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Adroddiad DrakBackup \n"
-"\n"
+"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar 么l cychwyn\n"
+"Hoffech chi i XFree ddechrau wedi i chi ail-gychwyn?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "GWYBODAETH"
+msgid "Build the disk"
+msgstr "Adeiladu'r ddisg"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "TERFYNNOL"
+msgid "Disconnect %s"
+msgstr "Dadgysylltu %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "RHYBUDD"
+msgid "Status:"
+msgstr "Statws"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Nid yw cron ar gael et ar gyfer di-wraidd"
+msgid "HTTP proxy"
+msgstr "Dirprwy HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
+msgid "SSH Server"
+msgstr "Gwasanaethwr SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Rhwydwaith drwy rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, bwrdd gwaith)"
+msgid "European protocol"
+msgstr "Protocol Ewropeaidd"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Cychwyn yr amgylchedd graffigol wrth gychwyn eich system"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", argraffydd \"%s\" ar wasanaethwr \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Modd system"
+msgid "Error"
+msgstr "Gwall"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Croeso Cychwyn"
+msgid "allow \"su\""
+msgstr "caniat谩u \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Sgr卯n Lilo"
+msgid "Australia"
+msgstr "Awstralia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Dewis thema ar\n"
-"gyfer lilo a bootsplash,\n"
-"mae modd eu dewis\n"
-"ar wah芒n"
+msgid "please wait during ttmkfdir..."
+msgstr "arhoswch yn ystod ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Them芒u"
+msgid "Configure only card \"%s\"%s"
+msgstr "Ffurfweddu cerdyn \"%s\" %s yn unig"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Dewis sgr卯n croeso"
+msgid "Level"
+msgstr "Lefel"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Rydych yn defnyddio %s fel rheolwr cychwyn.\n"
-"Cliciwch Ffurfweddu i gychwyn dewin gosod"
+msgid "Change the printing system"
+msgstr "Newidiwch y system argraffu"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Them芒u LiLo a Croeso Cychwyn wedi eu gosod yn llwyddiannus"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Mae eich system yn cynnal ffurfweddiad amlben.\n"
+"Beth hoffech ei wneud?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Methodd gosod y thema!"
+msgid "Configure services"
+msgstr "Ffurfweddu gwasanaethau"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Nodyn"
+msgid "Broadcast Address:"
+msgstr "Cyfeiriad Darlledu:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Ail gychwyh 'lilo'"
+msgid "mount failed: "
+msgstr "maethodd y gosodiad"
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Methu ailgychwyn LiLo!\n"
-"Cychwyn \"lilo\" fel gwraidd ar y linell orchymyn i gwblhau gosod thema "
-"LiLo'n llawn."
+"Mae angen i'r cnewyllyn GNU/Linux gyflawni cyfrif cylch wrth gychwyn i "
+"gychwyn y cyfrif amser. Mae'r canlyniad yn cael ei gadw fel bogomips fel "
+"ffordd o \"feincnod\" y cpu."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Delwedd"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Methu cychwyn mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Gweinyddu Pell"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Methu ysgrifennu /etc/sysconfig/bootsplash.\\\\\n"
-"Heb ganfod y ffeil"
+"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
+"Defnyddiwch cnewyllyn 2.4"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Ysgrifennu %s"
+msgid "Selected All"
+msgstr "Dewis Popeth"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Methu ysgrifennu /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Heb ganfod neges lilo"
+msgid "Webmin Service"
+msgstr "Gwasanaethau Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Cop茂o %s i %s"
+msgid "device"
+msgstr "dyfais"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Cadw %s i %s.old wrth gefn"
+msgid "All"
+msgstr "Popeth"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Creu thema newydd"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Dangos thema\n"
-"yn y consol"
+msgid "Greece"
+msgstr "Groeg"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Gosod them芒u"
+msgid "An error occurred"
+msgstr "Digwyddodd gwall"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Modd Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Rhaid i'r pecyn gael ei uwchraddio\n"
+"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Modd Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (cynllun teipiadur)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "llaw"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Ffeil/_Gadael"
+msgid "Printer manufacturer, model, driver"
+msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Ffeil"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Does dim cyfrwng neu mae wedi ei amddiffyn rhag ysgrifennu i'r dyfais %s.\n"
+"Rhowch un i mewn.."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Ffurfweddu'r Math o Gychwyn"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Dim porwr ar gael! Gosodawch un"
+msgid "Printer on NetWare server"
+msgstr "Argraffydd ar wasanaethwr NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "cysylltwyd 芒 dewin Bugzilla..."
+msgid "Give the ram size in MB"
+msgstr "Rhowch maint RAM mewn MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Pecyn heb ei osod"
+msgid "Real name"
+msgstr "Enw cywir"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Heb ei osod"
+msgid "done"
+msgstr "gorffen"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Offer Unigol"
+msgid "Please uncheck or remove it on next time."
+msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Adroddiad"
+msgid "Higher"
+msgstr "Uwch"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Nid oes Cerdyn Teledu wedi ei ganfod ar eich peiriant. Gwiriwch fod Cerdyn "
+"Fideo/Teledu sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
"\n"
"\n"
-"I gyflwyno adroddiad gwall, cliciwch ar y botwm adroddiad.\n"
-"Bydd hyn yn agor ffenestr porwr gwe yn https://drakbug.mandrakesoft.com\n"
-" lle welwch ffurflen i'w llenwi. Bydd yr wybodaeth rhowch arno'n cael ei\n"
-"drosglwyddo i'r gwasanaethwr\n"
+"Cewch ymweld 芒'n cronfa ddata caledwedd yn:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Ryddhad"
+msgid "Can't find %s on %s"
+msgstr "Methu canfod %s ar %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
+msgid "Japanese 106 keys"
+msgstr "Siapa毛aidd 106 bysell"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Pecynnau"
+msgid "This will take a few minutes."
+msgstr "Bydd hyn yn cymryd rhai munudau"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Rhaglen"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Dewin Ffurfweddu"
+msgid "Use scanners on remote computers"
+msgstr "Defnyddio sganer ar gyfrifiaduron pell"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Dileu'r rheol hwn"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Offeryn Trosglwyddo o Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Mynediad at argraffydd ar wasanaethwr CUPS pell"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Rhowch ddisg meddal yn %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Rheolwr Meddalwedd"
+msgid "Maldives"
+msgstr "Maldives"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Rheoli o Bell"
+msgid "compact"
+msgstr "cryno"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 munud"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "ar sianel %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ",dyfais amlbwrpas"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Offeryn Cydamseru"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Nid oes rhaniadau FAT i newid eu maint (neu nad oes digon o le ar 么l)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Dewin Tro Cyntaf"
+msgid "Up"
+msgstr "I fyny"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Canolfan Rheoli Mandrake"
+msgid "Firewall"
+msgstr "Mur Cadarn"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Offeryn Adross Gwall Mandrake"
+msgid "Area:"
+msgstr "Ardal:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Paramedrau"
+msgid "(E)IDE/ATA controllers"
+msgstr "Rheolyddion (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ffurfweddu Cysylltiad 芒'r Rhyngrwyd"
+msgid "Printer Server"
+msgstr "Gwasanaethwr Argraffydd"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "Cleient DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr "Datgysylltwyd yn llwyr o'r Rhyngrwyd."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Cerdyn Ethernet"
+msgid "Custom configuration"
+msgstr "Ffurfweddiad addasu"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Mynedfa"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Dangoswch lle bydd y delwedd gosod ar gael.\n"
+"\n"
+"Os nad oes gennych gyfeiriadur yn barod, copiwch gynnwys y CD neu'r DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Math o gyswllt:"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre a Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Proffil:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Anawsterau Adfer Ffeiliau wrth gefn\n"
+"\n"
+"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
+"ffeiliau wrth gefn cyn eu hadfer.\n"
+"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
+"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
+"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
+"data wrth gefn gyda llaw.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Ffurfweddiad cysylltiad 芒'r Rhyngrwyd"
+msgid "saving Bootsplash theme..."
+msgstr "cadw thema Croeso cychwyn..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych cysylltiad 芒'r Rhyngrwyd.\n"
-"Cr毛wch un drwy glicio ar 'Ffurfweddu'"
+msgid "Portugal"
+msgstr "Portiwgal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
-"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
+msgid "Do you have another one?"
+msgstr "Oes gennych un arall?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "cychwyn nawr"
+msgid ", printing to %s"
+msgstr ", argraffu i %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "dad weithredu nawr"
+msgid "Assign host name from DHCP address"
+msgstr "Rhowch enw'r gwesteiwr o'r cyfeiriad DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "Cleient DHCP"
+msgid "Toggle to normal mode"
+msgstr "Arbennigwr > Cyffredinol"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Cychwyn y peiriant"
+msgid "Generic"
+msgstr "Generig"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocol Cychwyn"
+msgid "Cylinder %d to %d\n"
+msgstr "Silindr %d i silindr %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Addasydd %s: %s"
+msgid "New profile..."
+msgstr "Proffil newydd..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
+msgid "Which disk do you want to move it to?"
+msgstr "Pa ddisg hoffech chi symud iddo?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Ffurfweddiad y Rhwydwaith Lleol"
+msgid "Display logo on Console"
+msgstr "Darddangos logo yn y Consol"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych unrhyw rhagwynebau wedi\n"
-"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
-"drwy glicio ar 'Ffurfweddu'"
+msgid "Windows Domain"
+msgstr "Parth Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Cysylltu..."
+msgid "Interface %s (on network %s)"
+msgstr "Rhyngwyneb %s (ar rwydwaith %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Dadgysylltu..."
+msgid "INFO"
+msgstr "GWYBODAETH"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Heb gysylltu"
+msgid "Wallis and Futuna"
+msgstr "Wallis a Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Wedi cysylltu"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Mae angen creu /etc/dhcpd.conf yn gyntaf"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
+msgid "Is FPU present"
+msgstr "Yw'r FPU yn bresennol"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr "Rhyngwyneb:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Does unrhyw sganiwr wedi ei ganfod ar gael ar eich cyfrifiadur.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Mynedfa:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
-msgstr "Gosod"
+msgid "Build Single NIC -->"
+msgstr "Adeiladau NIC unigol -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Cliciwch yma i gychwyn y dewin ->"
+msgid "Is this correct?"
+msgstr "Ydi hyn yn gywir?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Dewin..."
+msgid "Marshall Islands"
+msgstr "Marshall Islands"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
-msgstr "Statws"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr "Math: "
+msgid "Root password"
+msgstr "Cyfrinair gwraidd"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr "Mynediad i'r Rhyngrwyd"
+msgid "Build All Kernels -->"
+msgstr "Adeiladu pob cnewyllyn -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Enw gwesteiwr:"
+msgid "if set to yes, report unowned files."
+msgstr "os wedi ei osod i iawn, adrodd ar ffeiliau heb berchennog."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Nid oes gennych raniad cyfnewid\n"
+"\n"
+"Parhau beth bynnag?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr "Stad"
+msgid "Server IP missing!"
+msgstr "IP'r gwasanaethwr ar goll!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "Gyrrwr"
+msgid "Suriname"
+msgstr "Suriname"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protocol"
+msgid "Enable ACPI"
+msgstr "Galluogi ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "Rhyngwyneb"
+msgid "Graphical Environment"
+msgstr "Amgylchedd Graffig"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Ffurfweddu Mynediad i'r We..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
-msgstr "Arhoswch"
+msgid "on Tape Device"
+msgstr "ar Ddyfais T芒p"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
-"un cyfredol):"
+msgid "Do nothing"
+msgstr "Gwneud dim"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
-msgstr "Proffil newydd..."
+msgid "Delete Client"
+msgstr "Diddymu Cleient"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Proffil i'w ddileu:"
+msgid "Filesystem type: "
+msgstr "Math o system ffeilio"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr "Proffl dileu"
+msgid "Starting network..."
+msgstr "Cychwyn y rhwydwaith..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
+msgid "Vietnam"
+msgstr "Fietnam"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Mae'r Rheolwr Arddangos X11 yn caniat谩u i chi fewngofnodi\n"
-"i'ch system yn raffigol gyda'r X Windows System yn rhedeg. Mae'n cynnal\n"
-"rhedeg amryw o sesiynau X ar eich cyfrifiadur ar yr un pryd."
+msgid "/_Fields description"
+msgstr "/_Disgrifiad meysydd"
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Dewis rheowr arddangos"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Y diogelwch mwyaf"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"Methu cau mkbootdisk yn iawn: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "Cymorth"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Methu fforchio: %s"
+msgid "Your personal phone number"
+msgstr "Eich rhif ff么n personol"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Pa faint o le ydych am ei gadw ar gyfer Windows ar"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Does dim cyfrwng neu mae wedi ei amddiffyn rhag ysgrifennu i'r dyfais %s.\n"
-"Rhowch un i mewn.."
+"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
+"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Gwnewch yn siwr fod y deunydd ar gael ar gyfer y ddyfais %s"
+msgid "Username required"
+msgstr "Mae angen enw defnyddiwr"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
+"ddibynnu pa\n"
+" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
+"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
+"os ydych\n"
+"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
+"bysellfwrdd\n"
+"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
+" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn 么l i'r cam yma "
+"yn y\n"
+" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
+"\n"
+"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
+"cael eu\n"
+" cynnal.\n"
+" \n"
+"Os fyddwch yn dewis cynllun bysellfwrdd wedi ei seilio ar wyddor an-"
+"Lladinaidd, \n"
+"bydd y deialog nesaf yn caniat谩u i chi ddewis rwymiad allwedd fydd yn newid "
+"y\n"
+"bysellfwrdd rhwng cynlluniau Lladin ac an-Lladin."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Adeiladu'r ddisg"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Allbwn"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Ymredymiadau: (arg)\n"
+"\n"
+"Ganiat谩u/Gwrthod negeseuon gwall IPv4 ffug."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Tynnu modiwl"
+msgid "mkinitrd optional arguments"
+msgstr "ymresymiad dewisol mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Ychwanegu modiwl"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Syrffio'r We gyda Gwe-lywiwr Mozilla neu Konqueror, darllen eich e-bost "
+"gydag Evolution neu Kmail, creu eich dogfennau gydag OpenOffice.org"
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "peidio cynnwys modiwlau scsi"
+msgid "Protocol for the rest of the world"
+msgstr "Protocol ar gyfer gweddill y byd"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "os oes angen"
+msgid "Print test pages"
+msgstr "Argraffu tudalennau prawf"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "peidio cynnwys modiwlau raid"
+msgid "64 MB or more"
+msgstr "16 MB neu fwy"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "grym"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
+"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
+"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
+"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "ymresymiad dewisol mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Dewiswch y ddyfais lle mae %s wedi ei gysylltu"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Maes Uwch"
+msgid "Not formatted\n"
+msgstr "Heb ei fformatio\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "fersiwn cnewyllyn"
+msgid "Periodic Checks"
+msgstr "Gwirydd Cyfnodol"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "rhagosodedig"
+msgid "PXE Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Cyffredinol"
+msgid "Backup the system files before:"
+msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "creu disg cychwyn"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
+"cael ei gysylltu 芒'r Rhyngrwyd fel cleient."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Gyrrwr disg meddal cyntaf"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Maint"
+msgid "/File/_Quit"
+msgstr "/Ffeil/_Gadael"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Enw'r modiwl"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Wedi'r dad osod"
+msgid "Choose the new size"
+msgstr "Dewiswch y maint newydd"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Tynnu ffontiau oddi ar eich system!"
+msgid "Media class"
+msgstr "Dosbarth y cyfrwng"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Prawf Init"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Nid yw %s yn hysbys gan y fersiwn hwn o Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Wedi'r Gosod"
+msgid "Faroe Islands"
+msgstr "Ynysoedd Faroe"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Gosod a throsi ffontiau"
+msgid "Restart XFS"
+msgstr "Ail gychwyn XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Cop茂o'r ffontiau ar eich system!"
+msgid "Add host/network"
+msgstr "Ychwanegu gwesteiwr/rhwydwaith"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Rhestr Tynnu"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"os wedi ei osod i iawn, gwirio am gyfrinair gwag, neu un arall ddyllai fod "
+"yn /etc/shadow neu eraill gyda enw 0."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Dewis Popeth"
+msgid "Please enter the directory to save to:"
+msgstr "Rhowch y cyfeiriadur i gadw iddo:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Dad ddewis Popeth"
+msgid "Model name"
+msgstr "Enw'r model"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "yma os nad."
+msgid "Albania"
+msgstr "Albania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "cliciwch yma os ydych yn siwr."
+msgid "No CDR/DVDR in drive!"
+msgstr "Dim CDR/DVDR yn y gyrrwr!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Gosod Rhestr"
+msgid "British Indian Ocean Territory"
+msgstr "British Indian Ocean Territory"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
+msgid "Normal Mode"
+msgstr "Modd Arferol"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
+"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau. \n"
"\n"
-"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi eich Gwasanaethwr X."
+"Sylwer bod yr holl gyfrwn \"gwe\" yn defnyddio'r ddisg caled."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Argraffyddion Generig"
+msgid "Printer connection type"
+msgstr "Math o gyswllt argraffydd"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Nid oes addasydd rhwydwaith ar eich system!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Rhwydwaith %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
+msgid "Option %s out of range!"
+msgstr "Dewis %s allan o amrediad!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Hawlfraint (C) 2001-2002 MandrakeSoft \n"
-"\tDUPONT Sebastien sdupont(fersiwn wreiddiol)\n"
-" CHAUMETTE Damien<dchaumette\\@mandrakesoft.com\n"
-"\n"
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn 么l eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA\n"
-" Diolch:\n"
-" - pfm2afm: \n"
-"\t gan Ken Borgendale:\n"
-"\t Trosi ffeil .pfm Windows i .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t bganJames Macnicol: \n"
-"\t type1inst cynhyrchu files fonts.dir fonts.scale a Fontmap.\n"
-" - ttf2pt1: \n"
-"\t gan Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Trosi ffeiliau ffont i ffontiau afm pfb\n"
-"\n"
-"\n"
+msgid "Connect %s"
+msgstr "Cysylltu %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Ynghylch"
+msgid "Restarting CUPS..."
+msgstr "Ail gychwynCUPS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Rhestr Ffontiau"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Argraffu/Sganio/Cardiau Llun ar \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Dewisiadau Uwch"
+msgid "Duplicate mount point %s"
+msgstr "Pwynt gosod dyblyg %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Dad osod Ffontiau"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "os wedi ei osod i iawn, gwirio gyda chkrootkit."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Estyn Ffontiau Windows"
+msgid "Connection Configuration"
+msgstr "Ffurfweddiad y Cysylltiad"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Mewnforio Ffontiau"
+msgid "Unknown|Generic"
+msgstr "Anhysbys|Generig"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
+"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
+"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiat谩u\n"
+"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
+"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol 芒'r rhyngrwyd,\n"
+"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
+"\n"
+"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
+"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
+"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
+"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "gorffen"
+msgid "Quit"
+msgstr "Gadael"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "ail gychwyn xfs"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Llethu ffeiliau Ffontiau"
+msgid "Auto allocate"
+msgstr "Awto ddynodi"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Ail gychwyn XFS"
+msgid "Check bad blocks?"
+msgstr "Gwirio blociau gwallus?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Llethu Ffeiliau Dros dro"
+msgid "Other MultiMedia devices"
+msgstr "Dyfeisiau AmlGyfrwng eraill"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "adeiladu math 1inst"
+msgid "No remote machines"
+msgstr "Dim cyfrifiaduron pell"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "trosi ffontiau pfm"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Croeso i'r Dewin Gosod Argraffydd\n"
+"\n"
+"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
+"芒'r cyfrifiadur hwn,\n"
+"\n"
+"Os oes gennych argraffydd(ion) yn gysylltiedig 芒'r peiriant, cysylltwch nhw "
+"芒'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod.\n"
+"\n"
+"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
+"eich argraffydd(ion) ar hyn o bryd."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "trosi ffontiau ttf "
+msgid "Authentication NIS"
+msgstr "Dilysu LDAP"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "cyfeirio Ghostscript"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Trosiad ffontiau"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Mae Rhannu Cysylltiad 芒'r Rhyngrwyd wedi ei alluogi"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "Wedi gosod True Type"
+msgid "Card IO_0"
+msgstr "IO_O y cerdyn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "arhoswch yn ystod ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "United Arab Emirates"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Gosod ffontiau True Type"
+msgid "Card IO_1"
+msgstr "IO_1 y cerdyn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Cop茂o ffontiau"
+msgid "Thailand"
+msgstr "Gwlad Thail"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Chwilio am ffontiau yn y rhestr gosod"
+msgid "Routers:"
+msgstr "Llwybryddion:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "methu cnafod unrhyw ffontiau.\n"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ailddewis y ffontiau cywir"
+msgid "Display all available remote CUPS printers"
+msgstr "Arddangos pob argraffydd CUPS pell sydd ar gael"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
+msgid "Mandrake Linux Installation %s"
+msgstr "Gosodiad %s Mandraks Linux"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "heb ganfod ffontiau"
+msgid "Thai keyboard"
+msgstr "Bysellfwrdd Thai"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "pob ffont"
+msgid "Dialup options"
+msgstr "Dewisiadau cyswllt ff么n"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Tynnu ffontiau wedi eu gosod"
+msgid "Bouvet Island"
+msgstr "Bouvet Island"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Chwilio am ffontiau wedi eu gosod"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
+"Os nad oes porth yn cael ei gynnig, bydd 631 yn cael ei gymryd fel y "
+"rhagosodedig."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Croeso i'r Gwasanaeth Rhannu Cysylltiad 芒'r Rhyngrwyd\n"
-"\n"
-"%s\n"
+"Newidiwch eich CD-ROM\n"
"\n"
-"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Ffurfweddiad Rhannu Cysylltiad 芒'r Rhyngrwyd"
+"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
+"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nid oes Rhannu Cysylltiad 芒'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
+msgid "Polish"
+msgstr "Pwylaidd"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Rhwydwaith drwy webday.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Mae popeth wedi ei ffurfweddu\n"
-"Gallwch rannu cysylltiad 芒'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
-"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
+"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
+"yr offeryn ffurfweddu caledwedd."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Anhawster wrth osod pecyn %s"
+msgid "Netmask"
+msgstr "Netmask"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
+msgid "No hard drives found"
+msgstr "Heb ganfod gyrwyr caled"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Ffurfweddu..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
+msgid "2 buttons"
+msgstr "2 fotwm"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
+msgid "What kind is your ISDN connection?"
+msgstr "Pa fath o gysylltiad IDSN?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
+msgid "Label"
+msgstr "Label"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Les mewyaf (mewn eiliadau)"
+msgid "Save on floppy"
+msgstr "Cadw ar ddisg meddal"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Les rhagosodedig (mewn eiliadau)"
+msgid "Printer auto-detection"
+msgstr "Awto ganfod argraffydd"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Amrediad terfyn DHCP"
+msgid "Which of the following is your ISDN card?"
+msgstr "Pa un o'r canlynol yw eich cerdyn IDSN?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Amrediad cychwyn DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
+"rhwydweithiau TCP/IP.\n"
+"Mae'r gwasanaeth yn darparu ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
+"ffurfweddu\n"
+"drwy'r ffeil /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Enw'r parth mewnol"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "Y Gwasanaethwr DHCP IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=>Hysbysiad, mae label wedi newid:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Gwasanaethwr DHCP IP (Hwn)"
+msgid "Number of capture buffers:"
+msgstr "Nifer o fyffers cipio:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Eich dewis? (0/1, rhagosodedig %s)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Ffurfweddiad Gwasanaethwr DHCP\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Mae modd dewis dewisiadau gwahanol ar gyfer ffurfweddiad DHCP.\n"
-"Os nad ydych yn gwybod ystyr y dewis, gadewch lonydd iddo.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Cyfeiriad y Rhwydwaith Lleol "
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
-"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
-"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
-"fyddaf yn ei newid na chyffwrdd 芒 ffurfweddiad eich gwasanaethwr DHCP.\n"
+"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
+"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
"\n"
-"Y cofnod DNS rhagosodedig yw'r enw gwasanaethwr storio sydd wedi ei "
-"ffurfweddu yn y mur cadarn. Mae modd i chi ei newid am eich IP DNS ISP, e."
-"e. \n"
+"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
+"data\n"
+"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
"\n"
-"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
-"DHCP ar eich cyfer.\n"
+"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
+"Rhaid \n"
+"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
+"\"\n"
+"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
+"data rydych am ei gadw (e.e. \"/home\").\n"
+"\n"
+"Byddwch ofalus wrth ddewis rhaniadau. Ar 么l fformatio bydd yr holl ddata ar\n"
+"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
+"\n"
+"Cliciwch \"Nesaf ->\" pan ydych yn barod i fformatio rhaniadau.\n"
+"\n"
+"Cliciwch \"<- Cynt\" os ydych am ddewis rhaniad arall ar gyfer eich "
+"gosodiad\n"
+"Mandrake Linux newydd\n"
+"\n"
+"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
+"gwallus ar y ddisg."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Ffrengig"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tsiec (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Canfod caledwedd ar waith"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Dyfais Rhyngrwyd"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Crynodeb"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Ffurfweddiad presennol '%s':\n"
-"\n"
-"Rhwydwaith: %s\n"
-"Cyfeiriad IP: %s\n"
-"Priodweddau IP: %s\n"
-"Gyrrwr: %s"
+" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
+"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Ffurfweddiad rhyngwyneb cyfredol"
+msgid "Next"
+msgstr "Nesaf"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Nid oes modd gosod y cychwynnydd ar raniad %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Na (arbennigwyr yn unig)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Ail ffurfweddiad awtomatig"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
"\n"
-"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
+"Croeso\n"
"\n"
-"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
-"wneud."
+"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu 芒'ch Rhwydwaith "
-"Lleol."
+"i weithio'n iawn mae angen 'ImageMagick' i gwblhau'r ffurfweddiad.\n"
+"Cliciwch \"Iawn\" i osod 'Image Magick' neu \"Diddymu\" i orffen"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
+"Bydd y pecynnau canlynol yn cael eu tynnu ganiat谩u diweddaru eich system: %"
+"s\n"
"\n"
-"%s\n"
"\n"
-"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
+"Ydych chi am dynnu'r pecynnau hyn?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Rhyngwyneb rhwydwaith"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
-"yr offeryn ffurfweddu caledwedd."
+msgid "NIS Domain"
+msgstr "Parth NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Nid oes addasydd rhwydwaith ar eich system!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Ffeiliau Defnyddiwr:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Rhagwyneb %s"
+msgid "Antarctica"
+msgstr "Antarctica"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
+msgid "Mount options"
+msgstr "Dewisiadau gosod"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Dyfais Rhyngrwyd"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Rhowch enw'r rhyngwyneb sy'n cysylltu 芒'r rhyngrwyd.\n"
-"\n"
-"Enghreifftiau:\n"
-"\t\tppp+ cysylltiad modem neu DSL, \n"
-"\t\teth0, neu eth1 fam gysylltiad cebl, \n"
-"\t\tippp+ am gysylltiad idsn.\n"
+"Dynodi dyfeisiau bras i ddyfeisiau bloc (megis dig caled rhaniadau), \n"
+"ar gyfer defnydd rhaglenni megis Oracle neu chwaraewyr DVD."
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei gysylltiad Rhyngrwyd\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
-"\n"
-"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
-"gyda drakconnect cyn mynd ymhellach.\n"
+"Ymresymiadau: (arg, alert=1)\n"
"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
+"Galluogi/Analluogi amddiffyn spwffio datrys enw. Os yw\n"
+"\\fIalert\\fP yn wir, adrodd i syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Rhannu Cysylltiad 芒'r Rhyngrwyd"
+msgid "Please wait, preparing installation..."
+msgstr "Arhoswch, paratoi i osod"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Mae Rhannu Cysylltiad 芒'r Rhyngrwyd wedi ei alluogi."
+msgid "Czech (QWERTZ)"
+msgstr "Tsiec (QWERTY)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Galluogi gwasanaethwyr..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "gwrthod"
+msgid "The port number should be an integer!"
+msgstr "Dylai rhif porth fod yn gyfanrif!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "ailffurfweddu"
+msgid "You must choose an image file first!"
+msgstr "Rhaid dewis ffeil delwedd yn gyntaf!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "galluogi"
+msgid "Restore from Hard Disk."
+msgstr "Adfer o'r Ddisg Caled."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
+msgid "Add to LVM"
+msgstr "Ychwanegu i LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
+msgid "DNS server"
+msgstr "Gwasanaethwr DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Mae Rhannu Cysylltiad 芒'r Rhyngrwyd wedi ei analluogi."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad a Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Analluogi gwasanaethwyr..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "dymunol"
+msgid "simple"
+msgstr "syml"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad Rhannu Cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
+msgid "Clear all"
+msgstr "Clirio i gyd"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Mae Rhannu Cysylltiad 芒'r Rhyngrwyd wedi ei alluogi"
+msgid "No test pages"
+msgstr "Dim tudalennau prawf"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Mae'n ddrwg gennym dim ond cnewyllyn 2.4 sy'n cael ei gynnal."
+msgid "Adapter %s: %s"
+msgstr "Addasydd %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falkland Islands (Malvinas)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Model anhysbys"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"Does dim porwr ar eich cyfrifiadur. Rhaid gosod un os ydych am archwilio'r "
-"system gymorth."
+"os wedi ei osod i iawn, gwirio ffeiliau/cyfeiriaduron ysgrifenadwy gan bawb."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Dilysu"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Path"
-msgstr "Llwybr"
+msgid "Backup Now"
+msgstr "Cadw wrth Gefn Nawr"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "group :"
-msgstr "grwp:"
+msgid "/_File"
+msgstr "/_Ffeil"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user :"
-msgstr "defnyddiwr :"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Dewis llwybr"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
+"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
+"o'r rhwydwaith."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "wedi ei dicio, nid fydd y perchennog a'r grwp yn cael ei newid"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (cynllun TSCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Defnyddio enw grwp i weithredu"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Defnyddio enw perchennog i weithredu"
+msgid "Creating auto install floppy..."
+msgstr "Creu disg meddal awto gosod"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Defnydd cyfeiriadur:\n"
-" dim ond perchennog y cyfeiriadur neu ffeil yn y cyfeiriadur hwn fydd yn "
-"cael ei ddileu."
+msgid "Searching for scanners ..."
+msgstr "Chwilio am sganiwyr..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Partitioning"
+msgstr "Creu Rhanniadau"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Russia"
+msgstr "Rwsia"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "ethernet card(s) detected"
+msgstr "cerdyn ethernet wedi ei ganfod"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Property"
-msgstr "Eiddo"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permissions"
-msgstr "Caniatadau"
+msgid "Can't create catalog!"
+msgstr "Methu creu catalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Current user"
-msgstr "Derbyn presennol"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Cwblhewch eich gosodiad diogelwch gyda'r feddalwedd hawdd ei defnyddio sy'n "
+"cynnwys darnau o safon uchel megis mur cadarn, gwasanaethwr a chleient "
+"rwydwaith preifat rhithiol (VPN), system canfod ymyrraeth a rheolwr traffig."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "browse"
-msgstr "pori"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nid oes digon o le ar gyfer awtoddynodi"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Golygu'r rheol bresennol"
+msgid "Set root password"
+msgstr "Gosod cyfrinair gwraidd"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "edit"
-msgstr "golygu"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Nid oes gyrrwr rhydd ar gyfer eich cerdyn sain (%s) ond mae yrrwr perchnogol "
+"yn \"%s\" ."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Dileu'r rheol hwn"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Ar 么l newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
+"golli"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "dileu"
+msgid "Internet connection configuration"
+msgstr "Ffurfweddiad cysylltiad 芒'r Rhyngrwyd"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Ychwanegu rheol newydd ar y diwedd"
+msgid "Scanning for TV channels"
+msgstr "Sganio am Sianel Teledu"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "ychwanegu rheol"
+msgid "Kernel:"
+msgstr "Kernel:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Symud y rheol i lawr un lefel"
+msgid "/_About..."
+msgstr "/_Ynghylch..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "I lawr"
+msgid "Bengali"
+msgstr "Bengali"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Symud y rheol i fyny un lefel"
+msgid "Preference: "
+msgstr "Dewis"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "I fyny"
+msgid "Wizard..."
+msgstr "Dewin..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "dewis ffeil perm i weld/golygu"
+msgid "Services: %d activated for %d registered"
+msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Mae Drakperm yn cael ei ddefnyddio i weld ffeiliau i'w defnyddio i drwsio "
-"caniatad, perchnogion, a grwpiau drwy msec.\n"
-"Mae modd i chi olygu eich rheolau eich hunfydd yn ysgrifennu droe y rheolau "
-"rhagosodedig."
+msgid "Create a bootdisk"
+msgstr "Creu disg cychwyn"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "caniatadau"
+msgid "Solomon Islands"
+msgstr "Solomon Islands"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "grwp"
+msgid "(module %s)"
+msgstr "(modiwl %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "defnyddiwr"
+msgid "Workgroup"
+msgstr "Grwp gwaith"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "llwybr"
+msgid "Printer host name or IP"
+msgstr "Enw'r gwesteiwr neu IP yr argraffydd"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lleoliad ffeil auto_install.cfg"
+msgid "Host Path or Module"
+msgstr "Llwybr Gwesteiwr neu Fodwil "
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"Dangoswch lle mae'r ffeil auto_install.cfg wedi ei leoli,\n"
-"\n"
-"Gadael yn wag os ydych am greu modd gosod yn awtomatig.\n"
-"\n"
+"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Heb ganfod delwedd CD neu DVD, copiwch y rhaglen osod a'r ffeiliau rpm."
+msgid "Show current interface configuration"
+msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "Heb ganfod delwedd"
+msgid "Development"
+msgstr "Datblygiad"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "Cyfeiriadur delwedd gosod"
+msgid "Done"
+msgstr "Gorffen"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Dangoswch lle bydd y delwedd gosod ar gael.\n"
-"\n"
-"Os nad oes gennych gyfeiriadur yn barod, copiwch gynnwys y CD neu'r DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "Gwasanaethwr Gwe"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Enw terfyn DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Enw cychwyn DHCP"
+msgid "Chile"
+msgstr "Chile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
+msgstr ""
+"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
+"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
+"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Mae'r gwasanaethwr DHCP yn caniat谩u i gyfrifiaduron eraill gychwyn drwy "
-"ddefnyddio PXE ar ystod\n"
-"penodol o gyfeiriadau\n"
-"Y cyfeiriad rhwydwaith yw %s gan ddefnyddio netmask o %s\n"
+"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
+"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
+"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
+"wynebau graffigol \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
+"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
+"\"Cipio\". Galwch hefyd \"man scanimage\" ar y linell orchymyn i dderbyn mwy "
+"o wybodaeth.\n"
"\n"
+"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Rhyngwyneb %s (ar rwydwaith %s)"
+msgid "(already added %s)"
+msgstr "(wedi ychwanegu %s yn barod)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Dewiswch pa rhyngwyneb rhwydwaith i'w ddefnyddio ar gyfer y gwasanaethwr "
-"dhcp."
+msgid ", using command %s"
+msgstr ", defnyddio gorchymyn %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i gwasanaethwr PXE fel "
-"gwasanaethwr DHCP a gwasanaethwr\n"
-"TFTP i adeiladu gwasanaethwr gosod.\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
-"\n"
-"Gwnewch yn siwr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
-"gyda drakconnect cyn mynd ymhellach.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Bysellau Alt a Shift gyda'i gilydd"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr Gosod"
+msgid "Flags"
+msgstr "Baneri"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Ffurfweddiad Gwasanaethwr PXE"
+msgid "Add/Del Users"
+msgstr "Ychwanegu/Diddymu Defnyddwyr"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Arhoswch, gosod dewisiadau diogelwch..."
+msgid "Host/network IP address missing."
+msgstr "Cyfeiriad y gwestriwr/rhwydwaith ar goll."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Arhoswch, gosod lefle diogelwch..."
+msgid "weekly"
+msgstr "bob wythnos"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Gwirydd Cyfnodol"
+msgid "Settings"
+msgstr "Gosodiadau"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Dewisiadau System"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Nid yw IP'r gwesteiwr/rhwydwaith yn gywir.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Dewisiadau Rhwydwaith"
+msgid "Here is the full list of available countries"
+msgstr "Dyma restr lawn o'r gwledydd sydd ar gael"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Prawf tudalen arall (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Mae modd gosod y dewisiadau canlynol i addasu\n"
-"diogelwch eich system. Os oes arnoch esboniadau, cliciwch ar cymorth.\n"
+"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
+"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
+"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Gweinyddwr Diogelwch:"
+msgid "Wait please"
+msgstr "Arhoswch"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Rhybuddion Diogelwch:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Lefel diogelwch:"
+msgid "Backup user files"
+msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(gwerth rhagosodedig: %s)"
+msgid "New"
+msgstr "Newydd"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
-"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Safonol: Dyma'r safon diogelwch sy'n cael ei argymell ar gyfer cyfrifiadur "
-"i'w ddefnyddio\n"
-" i gysylltu 芒'r Rhyngrwyd fel cleient.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Uchel: Mae rhai cyfyngiadau eisoes, ac mae gwiriadau'n cael eu rhedeg "
-"bob nos.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Uchaf: Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel "
-"gwasanaethwr sy'n medru\n"
-" derbyn cysylltiadau o nifer o gleientiau. Os mai eich "
-"peiriant yw'r unig gleient ar y\n"
-" Rhyngrwyd, dylech ddewis lefel is.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Paranoia: Mae'n debyg i'r lefel cynt ond mae'r system wedi ei gau'n llwyr a "
-"nodweddion diogelwch\n"
-" ar eu heithaf.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Gweinyddwr Diogelwch:\n"
-" Os yw'r dewis 'Rhybuddion Diogelwch' wedi ei ddewis, bydd "
-"rhybuddion diogelwch yn cael eu\t anfon i'r defnyddiwr hwn (enw "
-"defnyddiwr neu e-bost)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
+"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd 芒'r "
+"hawl\n"
+"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
+"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
+"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
+" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
+" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
+" peidiwch 芒 meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
+" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
+" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
+"rhaniad,\n"
+" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
+"bod\n"
+" yn \"root\".n\n"
"\n"
+"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
+"hyd.\n"
+" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
+"hawdd\n"
+" gwanhau'r system.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Er hynny, peidiwch 芒 gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
+"i\n"
+"chi fedri ei gofio heb ormod o drafferth.\n"
"\n"
+"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
+"Felly bydd\n"
+" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
+"Os ydych\n"
+"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
+"cyfrinair\n"
+" \"anghywir\" i gychwyn y tro cyntaf.\n"
"\n"
+"Os hoffech i fynediad i'r cyfrifiadur gael ei reoli gan wasanaethwr dilysu, "
+"cliciwch\n"
+"y botwm \"Uwch\".\n"
+"Os yw eich rhwydwaith yn defnyddio protocol gwasanaethau dilysu LDAP, NIS\n"
+"neu PDC Windows Domain, dewiswch un addas fel \"dilysu\",\n"
+"Os nad ydych yn gwybod, gofynnwch i'ch gweinyddwr rhwydwaith\n"
"\n"
-"Nodyn: os oes gennych gerdyn sain ISA PnP, bydd rhaid i chi ddefnyddio "
-"rhaglen sndconfig. Teipiwch \"sndconfig\" mewn consol."
+"Os ydych yn cael anhawsterau atgoffa cyfrineiriau, gallwch ddewis\n"
+"\"Dim cyfineiriau\", os na fydd eich cyfrifiadur yn cael cyswllt 芒'r we ac "
+"rydych\n"
+"yn ymddiried yn y defnyddiwr."
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Nid oes Cerdyn Sain wedi ei ganfod ar eich peiriant. Gwriwch fod Cerdyn Sain "
-"sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
-"\n"
-"\n"
-"Cewch ymweld 芒'n cronfa ddata caledwedd yn:\n"
-"\n"
+"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
+"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
+"ddylai'r lefel diogelwch fod neu fod gan y peiriant gysylltiad uniongyrchol\n"
+"gyda'r rhyngrwyd. Er hynny, mae diogelwch yn dod ar draul\n"
+"hwylustod. \n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Heb ganfod Cerdyn Sain!"
+"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s Rhagolwg Croeso Cychwyn (%s)"
+msgid "Load from floppy"
+msgstr "Llwytho o o ddisg meddal"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Cynhyrchu rhagolwg..."
+msgid "The following printer was auto-detected. "
+msgstr "Mae'r argraffydd canlynol wedi ei awtoganfod"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Rhaid dewis ffeil delwedd yn gyntaf!"
+msgid "Boot Floppy"
+msgstr "Disg Meddal Cychwyn"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Dewis lliw ProgressBar"
+msgid "Norwegian"
+msgstr "Norwyaidd"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Does gan y thema ddim croeso cychwyn yn %s !"
+msgid "Searching for new scanners ..."
+msgstr "Chwilio am sganiwr newydd..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "cadw thema Croeso cychwyn..."
+msgid "Apache World Wide Web Server"
+msgstr "Gwasanaethwr Gwe Fyd Eang Apache"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "dewis ffeil delwedd"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Graddiad y cpu (cynhyrchu rhif is-fodel)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "dewis ymyl"
+msgid "select path to restore (instead of /)"
+msgstr "dewis llwybr arall i adfer ( yn lle / )"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Ffurfweddu llun croeso cychwyn"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Gwneud neges y cnewyllyn yn dawel drwy ragosodiad"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Darddangos logo yn y Consol"
+msgid "China"
+msgstr "Tsieina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "dewis lliw"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+"(Gwnewch yn siwr bod eich argraffyddion wedi eu cysylltu a'u troi mlaen).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "cadw thema"
+msgid "Georgia"
+msgstr "Georgia"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "rhagolwg"
+msgid "Reading data of installed printers..."
+msgstr "Darllen data am argraffyddion gosodedig..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "lliw'r bar cynnydd"
+msgid " Erase Now "
+msgstr "Dileu Nawr"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "uchder y bar cynnydd"
+msgid "server"
+msgstr "Gwasanaethwr"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "lled y bar cynnydd"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"bar cynnydd cydfesuryn y\n"
-"yn ei gornel uchaf chwith"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "mae iawn yn golygu fod gan y cydbrosesydd rhifyddegol"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"bar cynnydd cydfesuryn x\n"
-"yn ei gornel uchaf chwith"
+msgid "Please Wait... Applying the configuration"
+msgstr "Arhoswch...Gosod y ffurfweddiad"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "uchder blwch testun"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "lled testun"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"blwch testun cydfesuryn y\n"
-"mewn rhif nodau"
+msgid "SCSI controllers"
+msgstr "Rheolyddion SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"blwch testun cydfesuryn x\n"
-"mewn rhif nodau"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "ar wasanaethwr LPD \"%s\", argraffydd \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Pori"
+msgid "Choosing a display manager"
+msgstr "Dewis rheowr arddangos"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Enw Thema"
+msgid "Zeroconf Host name"
+msgstr "Enw Gwesteiwr Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "cydraniad terfynnol"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "dylai cyfeiriad IP fod mewn fformat 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "creu'r cam cyntaf"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"i weithio'n iawn mae angen 'ImageMagick' i gwblhau'r ffurfweddiad.\n"
-"Cliciwch \"Iawn\" i osod 'Image Magick' neu \"Diddymu\" i orffen"
+msgid "Add an item"
+msgstr "Ychwanegu eitem"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Nid oes Cerdyn Teledu wedi ei ganfod ar eich peiriant. Gwiriwch fod Cerdyn "
-"Fideo/Teledu sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
-"\n"
-"\n"
-"Cewch ymweld 芒'n cronfa ddata caledwedd yn:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Mae' argraffyddion y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Heb ganfod Cerdyn Teledu!"
+msgid "I can't find needed image file `%s'."
+msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nawr mae modd i chi redeg Xawtv (o dan XWindows)!\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Diwrnod da i chi!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Porth annilys wedi ei gynnig: %s.\n"
+"Y fformat cywir yw \"port/tcp\" neu \"port/udp\", \n"
+"lle mae porth rhwng 1 a 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "Nid yw XawTV wedi ei osod!"
+msgid "Shell"
+msgstr "Cragen"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Digwyddodd gwall wrth sganio am sianelu teledu"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Sganio am Sianel Teledu"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome a Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Wrthi'n sganio am sianeli Teledu ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr ""
+"Methu mewngofnodi gan ddefnyddio enw defnyddiwr %s (cyfrinair anghywir?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Ardal:"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjan (lladin)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "Safon Teledu:"
+msgid "Package not installed"
+msgstr "Pecyn heb ei osod"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Rhowch eich safon teledu a gwlad"
+msgid "Become a MandrakeExpert"
+msgstr "Dewch yn MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Teledu Cebl Opus Awstralia"
+msgid "American Samoa"
+msgstr "American Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "Zeland Newydd"
+msgid "Protocol"
+msgstr "Protocol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Ffrainc(SECAM)"
+msgid "Copy fonts on your system"
+msgstr "Cop茂o'r ffontiau ar eich system!"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "Dwyrain Ewrop"
+msgid "Harddrake help"
+msgstr "Cymoerh Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "Gorllewin Ewrop"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Tseina (darlledu)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Ffurfweddiad Gwasanaethwr Terfynell Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Siapan (cable)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" Manylion Adroddiad DrakBackup \n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Siapan (darlledu)"
+msgid "Restore all backups"
+msgstr "Adfer pob cadw wrth gefn"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (cabl)"
+msgid "if set to yes, check open ports."
+msgstr "os wedi ei osod i iawn, gwirio pyrth agored."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "UDA (cable-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Bydd yn cymryd ychydig o amser i ddileu'r cyfrwng."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "UDA (cabl)"
+msgid "You can't select/unselect this package"
+msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "UDA (darlledu)"
+msgid "Warning"
+msgstr "Rhybudd"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"Nid yw XawTV wedi ei osod!\n"
-"\n"
-"\n"
-"Os oes gennych gerdyn teledu ond nid yw DrakX wedi ei ganfod (dim modiwl "
-"bttv ar saa7134\n"
-"yn \"/etc/modules\") na xawtv wedi ei osod, anfonwch canlyniad\n"
-"\"lspcidrake -v -f\" i \"install\\@mandrakesoft.com\"\n"
-"gyda phwnc \"undetected TV card\".\n"
"\n"
-"\n"
-"Mae modd ei osod wrth deipio \"urpmi xawtv\" fel gwraidd mewn consol."
+"- Ffeiliau Eraill: \n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "cynradd"
+msgid "Remote host name"
+msgstr "Enw gwesteiwr pell"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "eilradd"
+msgid "deactivate now"
+msgstr "dad weithredu nawr"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Cliciwch ar ddyfais yn y goeden chwith i gael at ei wybodaeth"
+msgid "access to X programs"
+msgstr "mynediad i raglenni X"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Anhysbys"
+msgid "Computing the size of the Windows partition"
+msgstr "Cyfrifo maint rhaniad Windows"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "anhysbys"
+msgid "Italy"
+msgstr "Yr Eidal"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Rhedeg \"%s\"..."
+msgid "Name of printer"
+msgstr "Enw'r argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "Rhedeg offeryn ffurfweddu"
+msgid "disable"
+msgstr "dymunol"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Modd ffurfweddu"
+msgid "error unmounting %s: %s"
+msgstr "gwall dadosod %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Gwybodaeth"
+msgid "Do it!"
+msgstr "Gwna!!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Caledwedd canfyddwyd"
+msgid "Cayman Islands"
+msgstr "Cayman Islands"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 fersiwn "
+msgid "%s not responding"
+msgstr "Nid yw %s yn ymateb"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Canfod ar waith"
+msgid "Select model manually"
+msgstr "Dewiswch y model gyda llaw"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Awdur"
+msgid "Format"
+msgstr "Fformatio"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Dyma HardDrake, offeryn ffurfweddu caledwedd Mandrake.\n"
-"Fersiwn:"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "About Harddrake"
-msgstr "Ynghylch Harddrake"
+"Y ffordd mwyaf cyffredin i gysylltu 芒 adsl yw pppoe\n"
+"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
+"Os nad ydych yn gwybod pa un, dewiswch 'pppoe'."
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Ynghylch..."
+msgid "Various"
+msgstr "Amrywiol"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Adrodd ar Wallau"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"Unwaith i chi ddewis dyfais, medrwch weld esboniad mewn meysydd yn y ffr芒m "
-"dde [\"Gwybodaeth\"]"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Select a device !"
-msgstr "Dewis dyfais!"
+"\n"
+"\n"
+"Nid oedd Printerdrake yn medru adnabod eich argraffydd %s. Dewiswch yr un "
+"cywir o'r rhestr."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Disgrifiad y meysydd:\n"
"\n"
+"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
+"\"Trosglwyddo\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Cymoerh Harddrake"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Disgrifiad meysydd"
+msgid "Albanian"
+msgstr "Albaniaidd"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Cymorth"
+msgid "Lithuania"
+msgstr "Lithuania"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Gadael"
+msgid "Compact"
+msgstr "Cryno"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Awtoganfod_gyrrwr jazz"
+msgid "Detected model: %s %s"
+msgstr "Canfyddwyd model %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Awtoganfod_modem"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "Mae Mandrake Linux wedi dewis y feddalwedd orau ar eich cyfer"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"Dyma HardDrake, offeryn ffurfweddu caledwedd Mandrake.\n"
+"Fersiwn:"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Awtoganfod_argraffydd"
+msgid "Local files"
+msgstr "Ffeiliau lleol"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_Dewisiadau"
+msgid "maybe"
+msgstr "efallai"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "enw gwerthwr y prosesydd"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "enw gwerthwr y ddyfais"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Mae'n edrych fel bod gan eich cerdyn graffig gyswlltTV-OUT.\n"
+"Mae modd ei ffurfweddu i weithio drwy byffer ffr芒m.\n"
+"\n"
+"Rhaid cysylltu eich cerdyn graffig 芒'ch teledu cyn cychwyn eich "
+"cyfrifiadur.\n"
+"Dewiswch \"TVout\" yn y cychwynnydd\n"
+"\n"
+"Ydy'r nodwedd hon gennych?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Math o fws mae eich llygoden wedi cysylltu iddi"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Graddiad y cpu (cynhyrchu rhif is-fodel)"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Rydych ar fin gosod y modd i argraffu i gyfrif Windows gyda chyfrinair. "
+"Oherwydd gwall ym mhensaern茂aeth meddalwedd cleient Samba mae'r cyfrinair yn "
+"cael ei osod mewn testun plaen ar y llinell orchymyn y cleient Samba sy'n "
+"cael ei ddefnyddio i anfon gwaith argraffu i'r gwasanaethwr Windows. Felly "
+"mae'n bosibl i bob defnyddiwr ar y peiriant i arddangos y cyfrinair ar y "
+"sgr卯n drwy'r gorchymyn \"ps auxwww\".\n"
+"\n"
+"Rydym yn argymell eich bod yn defnyddio un o'r dulliau gwahanol hyn ( yn yr "
+"holl achosion hyn, rhaid i chi wneud yn siwr mae dim ond peiriannau o'ch "
+"rhwydwaith lleol chi sydd 芒 mynediad i'ch gwasanaethwr Windows, e.e. drwy "
+"gyfrwng mur cadarn).\n"
+"\n"
+"Defnyddio cyfrif heb gyfrinair ar eich gwasanaethwr Windows, defnyddio "
+"cyfrif \"Ymwelydd\" neu gyfrif arbennig ar gyfer argraffu. Peidiwch tynnu "
+"eich amddiffyniad cyfrinair o gyfrif personol na'r cyfrif gweinyddwr.\n"
+"\n"
+"Gosod eich gwasanaethwr Windows i wneud yr argraffydd ar gael o dan brotocol "
+"LPD. Yna gosod argraffu o'r peiriant hwn gyda chyswllt \"%s\" yn "
+"Printerdrake.\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Stepio model"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil o liwiau (16 did)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the number of the processor"
-msgstr "rhif y prosesydd"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"Cadw ar Ddisg caled ar lwybr: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Dynodiad Prosesydd"
+msgid "Size: %d KB\n"
+msgstr "Maint: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "network printer port"
-msgstr "porth argraffydd rhwydwaith"
+msgid "Remove fonts on your system"
+msgstr "Tynnu ffontiau oddi ar eich system!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the name of the CPU"
-msgstr "enw'r prosesydd"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
+"\n"
+"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
+"\n"
+"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
+"wneud."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Name"
-msgstr "Enw"
+msgid "Graphical interface at startup"
+msgstr "Rhyngwyneb graffigol wrth gychwyn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "nifer y botymau sydd gan y llygoden"
+msgid "Please enter the directory to save:"
+msgstr "Rhowch y cyfeiriadur i gadw iddo:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Fformatio disgiau meddal derbyniol i'r gyrrwr"
+
+#: ../../raid.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Nifer o fotymau"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Enw swyddogol gwerthwr y cpu"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
+"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Model name"
-msgstr "Enw'r model"
+msgid "Connected"
+msgstr "Wedi cysylltu"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Cynnyrch y cpu (ee 8 am Pentiumlll,...]"
+msgid "USB printer \\#%s"
+msgstr "Argraffydd USB \\#\"%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Macedonian"
+msgstr "Macedonaidd"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "Model disg caled"
+msgid "Bridges and system controllers"
+msgstr "Rheolyddion pontydd a syatem"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "class of hardware device"
-msgstr "dosbarth y dyfais caledwedd"
+msgid "/File/_Save"
+msgstr "/Ffeil/_Cawd"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Media class"
-msgstr "Dosbarth y cyfrwng"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Is gynnyrch y cpu"
+msgid "No details"
+msgstr "Dim manylion"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Level"
-msgstr "Lefel"
+msgid "very nice"
+msgstr "hyfryd iawn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Fformatio disgiau meddal derbyniol i'r gyrrwr"
+msgid "Preview"
+msgstr "rhagolwg"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Floppy format"
-msgstr "Fformatio disg meddal"
+msgid "Remote Control"
+msgstr "Rheoli o Bell"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Nid yw rhai prosesyddion i486DX-100 cynnar yn medru dychwelyd i'w cyflwr "
-"gweithredu a'r o么 defnyddio \"halt\""
+msgid "Please select media for backup..."
+msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Halt bug"
-msgstr "Gwall halt"
+msgid "XFree86 server: %s\n"
+msgstr "Gwasanaethwr XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Roedd rhai Pentium cynnar yn wallus ac yn rhewi wrth ddadgodio F00F bytecode"
+msgid "Allow Thin Clients"
+msgstr "Caniat谩u Cleientiaid Tenau"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "F00f bug"
-msgstr "Gwall F00f"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"mae iawn yn golygu fod gan y cydbrosesydd fector eithriad yn gysylltiaedig"
+msgid "/_Options"
+msgstr "/_Dewisiadau"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "P'un ai oes gan yr FPU fector irq"
+msgid "Your printer model"
+msgstr "Model eich argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "mae iawn yn golygu fod gan y cydbrosesydd rhifyddegol"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
+"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
+"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Is FPU present"
-msgstr "Yw'r FPU yn bresennol"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Dileu ffeiliau tar y disg caled wedi'r cadw wrth gefn.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Mae gan brosesyddion Pentium cynnar wall yn eu prosesydd pwynt arnofio nad "
-"yw'n ymgyrraedd 芒'r cywirdeb angenrheidiol wrth berfformio Floating point "
-"DIVision (FDIV)"
+"Heb ganfod delwedd CD neu DVD, copiwch y rhaglen osod a'r ffeiliau rpm."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Gwall Fdiv"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Offeryn ffurfweddiad amlbwrpas Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Baneri cpu'n cael eu dangos gan y cnewyllyn"
+msgid "Save"
+msgstr "Gorffen"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Flags"
-msgstr "Baneri"
+msgid "The %s is unsupported"
+msgstr "Nid yw %s yn cael ei gynnal"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "y modiwl o'r cnewyllyn GNU/Linux sy'n trin y ddyfais honno"
+msgid "Load the drivers for your usb devices."
+msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Module"
-msgstr "Modiwl"
+msgid "Disk"
+msgstr "Disg"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "enw dyfais deinamig yn cael ei gynhyrchu gan incore kernel devfs"
+msgid "Enter a printer device URI"
+msgstr "Rhowch URI dyfais argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "New devfs device"
-msgstr "Dyfais devfs newydd"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
+msgstr ""
+"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
+"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
+"Gymuned Linux byd-eang"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "hen enw dyfais sefydlog yn cael ei ddefnyddio mewn pecyn dev"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Hen ffeil dyfais"
+msgid "French Guiana"
+msgstr "French Guiana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Mae'r maes yn disgrifio'r ddyfais"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "Amledd y cpu mewn MHz (y nifer o gyfarwyddiadau'r eiliad)"
+msgid "add a rule"
+msgstr "ychwanegu rheol"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Amledd (MHz)"
+msgid "A command line must be entered!"
+msgstr "Rhaid rhoi llinell gorchymyn!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Lefel gwybodaeth i'w gael drwy gyfarwyddid cpuid"
+msgid "Select user manually"
+msgstr "Dewis defnyddwyr gyda llaw"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Lefel cpuid"
+msgid "Transfer printer configuration"
+msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Teulu'r cpu (ee 6 am ddosbarth i686)"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Ydych chi am alluogi argraffu ar yr argraffyddion enwwi'r uchod?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Teulu cpuid"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"I hyn weithio gyda 2WK PDC, bydd angen i chi gael y gweinyddwr i redeg C:"
+"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add ac "
+"ailgychwyn y gwasanaethwr.Bydd angen hefyd yr enw defnyddiwr/cyfrinair "
+"Gweinyddiaeth Parth i uno'r peiriant 芒'r parth Windows(NM).\n"
+"Os nad yw'r rhwydwaith wedi ei alluogi eto, bydd DrakX yn ceisio ymuno 芒'r "
+"parth ar ol y cam o gychwyn y rhwydwaith.\n"
+"Os bydd y cam hwn yn methu am ryw reswm ac nid yw dilysiad yn gweithio, "
+"rhedwch 'smbpasswd -j DOMAIN -U USER%%PASSWORD' gan ddefnyddio eich Parth "
+"Windows(NM), a'ch Enw Defnyddiwr Gweinyddol/Cyfrinair ar 么l cychwyn eich "
+"system.\n"
+"Bydd y gorchymyn 'wbinfo -t' yn gwirio a yw eich cyfrinachau dilysu'n addas."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "A oes gan y cpu y Cyrix 6x86 Coma bug"
+msgid "%s (Port %s)"
+msgstr "%s(Porth %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Use network connection to backup"
+msgstr "Defnyddiwch cysylltiad rhwydwaith i gadw wrth gefn"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "nodweddion arbennig y gyrrwr (llosgi neu gynnal DVD)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"Ymresymniadau: (arg)\n"
+"\n"
+"Galluogi/Analluogi sulogin(8 mewn defnydd defnyddiwr unigol."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
+"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
+"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
+"\n"
+"Mae pecynnau wedi eu trefnu i grwpiau yn dibynnu ar ddefnydd penodol\n"
+"eich peiriant. Mae gan Mandrake Linux bedair gosodiad rhagosodedig. Mae\n"
+"modd meddwl amdanynt fel blychau ar gyfer pecynnau amrywiol, fel mae modd\n"
+"i \"Fan Gwaith\" fod a rhaglenni o \"Datblygu\" wedi eu gosod.\n"
+"\n"
+"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
+"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
+"\n"
+" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
+"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
+"\n"
+" * \"Datblygu\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
+"dewiswch\n"
+" y grwpiau perthnasol\n"
+"\n"
+" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
+"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
+"eu cael ar eich peiriant.\n"
+"\n"
+" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
+"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
+"\n"
+"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
+"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
+"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
+"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
+"\n"
+" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
+"i weithio.\n"
+"\n"
+" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
+"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
+"ar gyfer gosod gwasanaethwr.\n"
+"\n"
+" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
+"llinell orchymyn weithredol. Tua 65MB o faint.\n"
+"\n"
+"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
+"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
+"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
+"\n"
+"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
+" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
+"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
+"eisoes.\n"
+"\n"
+" "
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Maint y gyrrwr"
+msgid "Accept user"
+msgstr "Derbyn defnyddiwr"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Maint storfa cpu (ail lefel)"
+msgid "Server"
+msgstr "Gwasanaethwr"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Maint storfa"
+msgid "Bad choice, try again\n"
+msgstr "Dewis gwael, ceisiwch eto\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- dyfeisiau pci: dyma slot PCI, dyfais a gwaith y cerdyn\n"
-"- dyfeisiau ide: mae'r ddyfais un ai yn was neu feistr\n"
-"- dyfeisiau scsi: dynodiad dyfeisiau scsi a'r bws scsi"
+msgid "Heard and McDonald Islands"
+msgstr "Heard and McDonald Islands"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Lleoliad ar y bws"
+msgid "No alternative driver"
+msgstr "Dim gyrwyr eraill"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to expert mode"
+msgstr "Cyffredinol > Arbennigwr"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "(on this machine)"
+msgstr "(ar y peiriant hwn)"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Dylai cyfeiriad Porth fod mewn fformat 1.2.3.4"
+
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- dyfeisiau PCI ac USB : dyma restr gwerthwyr, dyfais, iswerthwyr ac "
-"isddyfais PCI/USB"
+"Wedi canfod winmodem \"%s\" , hoffech chi osod y feddalwedd angenrheidiol?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Dynodiad bws"
+msgid "Looking at packages already installed..."
+msgstr "Edrych arbecynnau wedieu gosod yn barod"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "Use Differential Backups"
msgstr ""
-"Mae angen i'r cnewyllyn GNU/Linux gyflawni cyfrif cylch wrth gychwyn i "
-"gychwyn y cyfrif amser. Mae'r canlyniad yn cael ei gadw fel bogomips fel "
-"ffordd o \"feincnod\" y cpu."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+msgid "Driver"
+msgstr "Gyrrwr"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Sianel EIDE/SCSI"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
+msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Channel"
-msgstr "Sianel"
+msgid "Printer on remote lpd server"
+msgstr "Argraffydd ar wasanaethwr lpd pell"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"dyma'r bws corfforol i'r ddyfais gael ei gysylltu iddo(e.e. PCI, USB,...)"
+"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
+"a'u gosod ar eich system.\n"
+"\n"
+"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
+"ffontiau ffug rewi eich Gwasanaethwr X."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot yw'r cychwynnydd ar gyfer caledwedd NewWorld MacIntosh. Mae'n\n"
+"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant.\n"
+"Fel rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u\n"
+"gosod. Os nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod\n"
+"gyda llaw ar y sgr卯n hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
+"\n"
+"Prif ddewisiadau Yaboot yw:\n"
+"\n"
+" * Cychwyn Neges: neges testun syml sy'n cael ei ddangos cyn yr anogwr\n"
+" cychwyn\n"
+"\n"
+" * Cychwyn y Ddyfais: yn dangos lle rydych am osod yr wybodaeth\n"
+"angenrheidiol i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu\n"
+"rhaniad ymlwythwr yn gynt, i ddal yr wybodaeth.\n"
+"\n"
+" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael\n"
+"gyda yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn\n"
+"mae modd dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
+"\n"
+" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwynLILO. "
+"Wedi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn\n"
+"rhagosodedig yn cael ei ddewis.\n"
+"\n"
+" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniat谩u i chi ddewis \"C\"\n"
+"am CD ar anogwr y cychwyn cyntaf.\n"
+"\n"
+" * Galluogi Cychwyn OF?: mae dewis hwn yn caniat谩u i chi ddewis |\"N\"\n"
+"am Open Firmware ar anogwr y cychwyn cyntaf.\n"
+"\n"
+" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu\n"
+"fydd yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bws"
+msgid "No mouse"
+msgstr "Dim llygoden"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "rhestr o yrrwr eraill ar gyfer eich cerdyn sain"
+msgid "Germany"
+msgstr "Yr Almaen"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Gyrrwyr eraill"
+msgid "Austria"
+msgstr "Awstria"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Dewiswch gynllun allweddell"
+msgid "Collapse Tree"
+msgstr "Cau'r goeden"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Methu cychwyn diweddariad byw!!! \n"
+msgid "Auto Install Configurator"
+msgstr "Ffurfweddwr Awto-Osod"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "Ffurfweddu rhwydwaith"
+
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Lle rydych chi eisiau gosod y cychwynnydd?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar 么l gorffen\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
+"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system yn\n"
+"effeithio iaith y ddogfennaeth, y gosodwr a'r system yn gyffredinol.\n"
+"Dewiswch eich ardal ac yna eich iaith.\n"
+"\n"
+"Bydd clicio ar y botwm \"Uwch\" yn caniat谩u i chi ddewis ieithoedd eraill\n"
+"i'w gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod\n"
+"ffeiliau penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd\n"
+" hynny. Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen,\n"
+" dewiswch \"Gymraeg\" fel y brif iaith yng ngolwg coeden ac yn yr Uwch\n"
+" cliciwch ar y seren lwyd sy'n cyfateb i \"Sbaeneg\". \n"
+"\n"
+"Sylwer bod modd gosod mwy nag un iaith. Mae modd i chi ddewis mwy\n"
+"nag un, neu hyd yn oed eu gosod i gyd, drwy ddewis y blwch \"Pob iaith\".\n"
+"Mae dewis cefnogaeth i bob iaith yn golygu gosod cyfieithiadau, ffontiau, \n"
+"gwiryddion sillafu, ag ati, ar gyfer yr iaith honno.Yn ychwanegol mae dewis\n"
+"\"Defnyddio Unicode\" yn gorfodi'r system i ddefnyddio unicode (UTF-8).\n"
+"Sylwer mai nodwedd arbrofol yw hon . Os ydych yn dewis ieithoedd\n"
+"gwahanol sy'n defnyddio amgodiad gwahanol bydd y cefnogaeth i utf-8\n"
+"yn cael ei osod, beth bynnag.\n"
+"\n"
+"I newid rhwng yr ieithoedd amrywiol sydd ar y system medrwch gychwyn\n"
+"y gorchymyn \"/usr/sbin/localedrake\" fel \"gwraidd\" i newid yr iaith\n"
+"sy'n cael ei ddefnyddio gan y system gyfan. Bydd rhedeg y gorchymyn fel\n"
+"defnyddiwr cyffredin yn gweithio dim ond ar gyfer yr unigolyn hwnnw."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Newid CD-Rom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Nid yw %s yn cael ei gynnal gan y fersiwn hwn o Mandrake Linux"
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
-"allgofnodi"
+msgid "DHCP client"
+msgstr "Cleient DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Cadw fel..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Methodd adfer o ffeil %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Rhowch eich cyfeiriad e-bost islaw"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "ffurfweddiad rhybudd"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Ydych chi'n siwr eich bod am osod argraffu ar y peiriant hwn?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
+msgid "New devfs device"
+msgstr "Dyfais devfs newydd"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "gosodiad llwyth"
+msgid "ERROR: Cannot spawn %s."
+msgstr "GWALL; methu taenu %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
+msgid "Boot Style Configuration"
+msgstr "Ffurfweddu'r Math o Gychwyn"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "gosodiad gwasanaeth"
+msgid "Backup files not found at %s."
+msgstr "Heb ganfod y ffeiliau wrth gefn yn %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Gwasanaeth Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Diolch am ddewis Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Gwasanaethau Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Armenaidd (ffonetig)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Gwasanaethwr SSH"
+msgid "Card model:"
+msgstr "Model cerdyn:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Gwasanaethwr Samba"
+msgid "Thin Client"
+msgstr "Cleient Tenau"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Gwasanaethwr E-bost Postfix"
+msgid "Start Server"
+msgstr "Cychwyn y Gwasanaethwr"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Gwasanaethwr Ftp"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Datrysydd Enw Parth"
+msgid "All remote machines"
+msgstr "Pob cyfrifiadur pell"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Gwasanaethwr Gwe Fyd Eang Apache"
+msgid "Install themes"
+msgstr "Gosod them芒u"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu e-bost\n"
-"\n"
-"Yma bydd modd i chi osod y system rhybuddio.\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Ffurfweddiad rhybudd e-bost"
+" yn diweddaru 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Rhybudd e-bost"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "arhoswch, dosbarthu ffeil: %s"
+msgid "Preparing installation"
+msgstr "Paratoi'r gosodiad"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Cynnwys y ffeil"
+msgid "Edit selected host/network"
+msgstr "Golygu'r gwesteiwr/rhwydwaith"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Calendr"
+msgid "Add User -->"
+msgstr "Pob Defnyddiwr -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Dewis ffeil"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "ond heb fod yn cydweddu"
+msgid "True Type fonts installation"
+msgstr "Gosod ffontiau True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "cydweddu"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Awtoganfod argraffyddion sy'n gysylltiedig yn uniongyrchol 芒'r rhwydwaith "
+"lleol"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "Gosodiadau"
+msgid "LAN configuration"
+msgstr "Ffurfweddiad y Rhwydwaith Lleol"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Offeryn i fonitro eich cofnodion"
+msgid "hard disk model"
+msgstr "Model disg caled"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "chwilio"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Does dim modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Esboniadau Offer Mandrake"
+msgid "Get Windows Fonts"
+msgstr "Estyn Ffontiau Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Mouse Systems"
+msgstr "Systemau Llygoden"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "Negeseuon"
+msgid "Iranian"
+msgstr "Iranaidd"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "Defnyddiwr"
+msgid "Croatia"
+msgstr "Croatia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Cymorth/_Ynghylch..."
+msgid "Gateway:"
+msgstr "Mynedfa:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Dewisiadau/Test"
+msgid "Add server"
+msgstr "Ychwanegu gwasanaethwr"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Ffeil/-"
+msgid "Remote printer name"
+msgstr "Enw'r argraffydd pell"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Ffeil/Cawd _fel"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"Mae gan Mandrake Linux offer wedi eu cynllunio i greu'r fersiwn mwyaf diogel "
+"o Linux erioed: Draksec, system o offer rheoli diogelwch, a mur cadarn iawn "
+"wedi eu cyplysu i leihau'r posibilrwydd o hacio."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "Dyfais: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Ffeil/_Cawd"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Cytundeb trwyddedu"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Ffeil/_Agor"
+msgid "System Options"
+msgstr "Dewisiadau System"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Ffeil/_Newydd"
+msgid "Please choose the desired security level"
+msgstr "Dewiswch lefel diogelwch"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Dangos ar y diwrnod penodol yn unig"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Efelychu'r trydydd botwm?"
+msgid ", USB printer"
+msgstr "argraffydd USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Dewiswch math eich llygoden"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Cysylltu %s"
+msgid "Configure X"
+msgstr "Ffurfweddu X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Dadgysylltu %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Twrcaidd (model traddodiadol \"F\")"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
+msgid "Congratulations!"
+msgstr "Llongyfarchiadau!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "derbyniwyd"
+msgid "Use owner id for execution"
+msgstr "Defnyddio enw perchennog i weithredu"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "darlledwyd"
+msgid "Down"
+msgstr "I lawr"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "derbyniwyd:"
+msgid "Raw printer (No driver)"
+msgstr "Argraffydd crai (dim gyrrwr)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "anfonwyd: "
+msgid "Install rpm"
+msgstr "Gosod rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Mesur lleol"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
+"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
+"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniat谩u "
+"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "cyfartaledd"
+msgid "Time remaining "
+msgstr "Amser yn weddill"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Ffurfweddiad lliw"
+msgid "UK keyboard"
+msgstr "Bysellfwrdd DG"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Methodd y cysylltiad.\n"
-"Gwiriwch eich ffurfweddiad yng Nghanolfan Rheoli Mandrake."
+msgid "Unmount"
+msgstr "Dad-osod"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "Cysylltiad wedi ei gwblhau"
+msgid "Uninstall Fonts"
+msgstr "Dad osod Ffontiau"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Datgysylltwyd yn llwyr o'r Rhyngrwyd."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Methodd datgysylltu o'r Rhyngrwyd."
+msgid "German (no dead keys)"
+msgstr "Almaenaidd (dim bysellau marw)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Cysylltu 芒'r Rhyngrwyd"
+msgid "Transferring %s..."
+msgstr "Trosglwyddo %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Datgysylltu o'r Rhyngrwyd"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil o liwiau (15 did)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Arhoswch, profi eich cysylltiad..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi ei "
+"ddefnyddio?"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Cofnodion"
+msgid "Reboot"
+msgstr "Ailgychwyn"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "Amser Cysylltiad:"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Derbyn Cyflymder"
+msgid "Mandrake Control Center"
+msgstr "Canolfan Rheoli Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Cyflymder Anfon:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Medrwch roi amrywiol byrth.\n"
+"Eng. dilys: 139/tcp 139/udp.\n"
+"Am wybodaeth ewch i /etc/services."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "Ystadegau"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Dangosydd\n"
+"\n"
+" Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
+"y dangosydd sy'n gysylltiedig 芒'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
+"dewiswch eich dangosydd."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Proffil"
+msgid "\t-Tape \n"
+msgstr "\t-T芒p \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Monitro'r Rhwydwaith"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Does dim porwr ar eich cyfrifiadur. Rhaid gosod un os ydych am archwilio'r "
+"system gymorth."
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Darllen data am argraffyddion gosodedig..."
+msgid "Remember this password"
+msgstr "Cofiwch y cyfrinair"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Enw/cyfeiriad IP gwesteiwr"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Mae Rhannu Cysylltiad 芒'r Rhyngrwyd wedi ei alluogi."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Rhwydwaith drwy SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Os cafodd yr argraffydd ei awtoganfod, dewiswch ef o'r rhestr ac ychwanegu "
+"enw defnyddiwr, cyfrinair a/neu grwp gwaith yn 么l yr angen."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Rhowch enw'r gwesteiwr neu'r cyfeiriad IP.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Defnyddiwch y lle gwag ar raniad Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Dewis y gwesteiwr ddylai'r sganiwr lleol fod ar gael iddynt:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Wedi canfod %s ar %s, ei ffurfweddi'n awtomatig?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Rhannu sganwyr lleol"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Ymresymiadau: arg)\n"
+"\n"
+"Defnyddio cyfrinair i wirio defnyddiwr."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Y peiriant hwn"
+msgid "XFree86 driver: %s\n"
+msgstr "Gyrrwr XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Tynnu'r gwesteiwr"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"Mae'r gwesteiwr/rhwydwaith ar y rhestr yn barod, does dim modd ei "
+"ychwanegu.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Golygu'r gwesteiwr"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Adroddiad DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Ychwanegu gwesteiwr"
+msgid "Choose the packages you want to install"
+msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Dyma'r cyfrifiaduron ddylai'r sganwyr fod ar gael:"
+msgid "Papua New Guinea"
+msgstr "Papua New Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Defnyddiwch o sganwyr pell"
+msgid "Serbian (cyrillic)"
+msgstr "Serbaidd (cyrilig)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Pob cyfrifiadur pell"
+msgid "Make kernel message quiet by default"
+msgstr "Gwneud neges y cnewyllyn yn dawel drwy ragosodiad"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r sganiwr lleol fod ar gael:"
+"Ydych chi am osod argraffydd (\"%s\")\n"
+"fel yr argraffydd rhagosodedig?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Defnyddio sganwyr ar westeiwyr:"
+msgid "The DHCP end range"
+msgstr "Amrediad terfyn DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Defnyddio sganer ar gyfrifiaduron pell"
+msgid "Creating bootdisk..."
+msgstr "Creu disg cychwyn"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Rhannu sganwyr i westeiwyr:"
+msgid "Wait please, testing your connection..."
+msgstr "Arhoswch, profi eich cysylltiad..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Mae' sganwyr y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
+msgid "Bringing down the network"
+msgstr "Cau'r rhwydwaith"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Medrwch benderfynu a ddylai sganwyr ar gyfrifiadur pell fod ar gael ar gyfer "
-"y cyfrifiadur hwn."
+msgid "Login ID"
+msgstr "Dynodiad Mewngofnodi"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Yma medrwch benderfynu a ddylai'r sganwyr sy'n gysylltiedig 芒'r cyfrifiadur "
-"hwn fod ar gael i gyfrifiaduron pell a pha rai."
+"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
+"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
+"yn darparu'r gallu i gloi ffeiliau NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Ailgynhyrchu rhestr o sganwyr wedi eu ffurfweddu..."
+msgid "DHCP Client"
+msgstr "Cleient DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Chwilio am sganiwr newydd..."
+msgid "dismiss"
+msgstr "gwrthod"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Chwilio am sganiwr wedi ei ffurfweddu..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Argraffu/Sganio ar \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Rhannu sganiwr"
+msgid "omit raid modules"
+msgstr "peidio cynnwys modiwlau raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Ychwanegu sganiwr gyda llaw"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
+"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
+"argraffydd (ion)."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Chwilio am sganwyr newydd"
+msgid "Internet Connection Configuration"
+msgstr "Ffurfweddu Cysylltiad 芒'r Rhyngrwyd"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Does unrhyw sganiwr wedi ei ganfod ar gael ar eich cyfrifiadur.\n"
+msgid "comma separated numbers"
+msgstr "rhifau gwahanwyd gan gollnod"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s\n"
-"ar gael ar eich system.\n"
+"Unwaith i chi ddewis dyfais, medrwch weld esboniad mewn meysydd yn y ffr芒m "
+"dde [\"Gwybodaeth\"]"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Symud y rheol i fyny un lefel"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Mae argraffyddion canlynol\n"
+"Mae'r argraffydd canlynol\n"
"\n"
"%s\n"
"ar gael ar eich system.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Mae eich %s wedi ei ffurfweddu.\n"
-"Medrwch ddefnyddio \"XSane\" i sganio dogfennau o'r ddewislen rhaglenni Aml-"
-"gyfrwng/Graffigau."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "dewis dyfais"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Dewiswch y ddyfais lle mae %s wedi ei gysylltu"
+msgid "I can't find any room for installing"
+msgstr "Methu canfod lle ar gyfer gosod"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Chwilio am sganiwyr..."
+msgid "Default printer"
+msgstr "Argraffydd rhagosodedig"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Awtoganfod pyrth ar gael"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu 芒'r Rhyngrwyd.\n"
+"Dewiswch ba un rydych am ei ddefnyddio.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Sylwer: Nid oes modd awtoganfod pyrth paralel)"
+msgid "Modify RAID"
+msgstr "Newid RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Rhaid i %s gael ei ffurfweddu gan printerdrake.\n"
-"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
+"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
+"cerdyn PCI ar y sgr卯n nesaf."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Nid yw %s yn cael ei gynnal"
+msgid "Add user"
+msgstr "Ychwanegu defnyddiwr"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Nid yw %s yn hysbys gan y fersiwn hwn o Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "Disg RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Nid yw %s yn cael ei gynnal gan y fersiwn hwn o Mandrake Linux"
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Porth: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Rhowch enw'r rhyngwyneb sy'n cysylltu 芒'r rhyngrwyd.\n"
+"\n"
+"Enghreifftiau:\n"
+"\t\tppp+ cysylltiad modem neu DSL, \n"
+"\t\teth0, neu eth1 fam gysylltiad cebl, \n"
+"\t\tippp+ am gysylltiad idsn.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Dewis eich bysellfwrdd"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Canfyddwyd model: %s"
+msgid "Format partitions"
+msgstr "Fformatio rhaniadau"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Cywiro cyswllt CUPS yn awtomatig"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Dewiswch model sganiwr"
+msgid "Running \"%s\" ..."
+msgstr "Rhedeg \"%s\"..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"Nid yw %s yng nghronfa ddata sganwyr. Hoffech chi ei ffurfweddu 芒 llaw?"
+msgid "enable radio support"
+msgstr "galluogi cynnal radio"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Wedi canfod %s ar %s, ei ffurfweddi'n awtomatig?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Canfod caledwedd ar waith"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Cafodd rhai dyfeisiau eu hychwanegu:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Cafodd rhai dyfeisiau yn nosbarth caledwedd\"%s\" eu tynnu:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Rhannu sganwyr i westeiwyr:"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
-"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
-"Gymuned Linux byd-eang"
+msgid "Loopback file name: %s"
+msgstr "Enw ffeil cylch-么l: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Croeso i fyd Cod Agored"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Dewiswch yr argraffydd i drin y gwaith argraffu."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Diolch am ddewis Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Peidio trosglwyddo argraffydd"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
-"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
-"ein tudalennau gwe \"Cymuned\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Hoffech chi wybod mwy am y gymuned Cod Agored? Ymunwch 芒 byd Meddalwedd "
-"Rhydd!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Adeiladu dyfodol Linux!"
+"\n"
+" Hawlfraint (C) 2001-2002 MandrakeSoft \n"
+"\tDUPONT Sebastien sdupont(fersiwn wreiddiol)\n"
+" CHAUMETTE Damien<dchaumette\\@mandrakesoft.com\n"
+"\n"
+"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
+"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
+"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
+"2 neu (yn 么l eich dewis) unrhyw fersiwn diweddarach.\n"
+"\n"
+" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
+" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
+" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
+" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
+" wybodaeth.\n"
+"\n"
+" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
+" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
+"MA 02111-1307, USA\n"
+" Diolch:\n"
+" - pfm2afm: \n"
+"\t gan Ken Borgendale:\n"
+"\t Trosi ffeil .pfm Windows i .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t bganJames Macnicol: \n"
+"\t type1inst cynhyrchu files fonts.dir fonts.scale a Fontmap.\n"
+" - ttf2pt1: \n"
+"\t gan Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Trosi ffeiliau ffont i ffontiau afm pfb\n"
+"\n"
+"\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mae Mandrake Linux 9.1 yn caniat谩u i chi ddefnyddio'r feddalwedd ddiweddaraf "
-"i chwarae ffeiliau cerddoriaeth a sain, golygu a threfnu eich delweddau, "
-"lluniau a fideo."
+msgid "Please check for multisession CD"
+msgstr "Gwiriwch os ydych yn defnyddio CD amlsesiwn"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Syrffio'r We gyda Gwe-lywiwr Mozilla neu Konqueror, darllen eich e-bost "
-"gydag Evolution neu Kmail, creu eich dogfennau gydag OpenOffice.org"
+msgid "user"
+msgstr "defnyddiwr"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "Mae Mandrake Linux wedi dewis y feddalwedd orau ar eich cyfer"
+msgid "Use Hard Disk to backup"
+msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mae Mandrake Linux 9.1 yn cynnig Canolfan Rheoli Mandrake, offeryn pwerus i "
-"addasu eich cyfrifiadur i'ch defnydd personol chi. Gallwch addasu elfennau "
-"megis lefelau diogelwch, offer ymylol (sgr卯n, llygoden, bysellfwrdd...), "
-"cysylltiad 芒'r Rhyngrwyd a llawer mwy!"
+msgid "Configure"
+msgstr "Ffurfweddu"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Offeryn ffurfweddiad amlbwrpas Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Gwnewch y cyfrifiadur yn addas i'ch anghenion diolch i'r 11 rhyngwyneb "
-"defnyddiwr Mandrake Linux y mae modd eu newid yn helaeth: KDE 3.1, Gnome "
-"2.2, WindowMaker, ..."
+"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
+"defnyddio eich rhwydwaith."
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Mae modd addasu eich byd..."
+msgid "Backup Users"
+msgstr "Defnyddwyr Cadw wrth Gwfn"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Dyw newid a chreu mewn ieithoedd gwahanol megis Perl, Python, C and C++ "
-"erioed wedi bod mor hawdd diolch i GNU gcc 3 neu'r amgylcheddau datblygiadol "
-"Cod Agored gorau."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 yw'r platfform datblygu gorau"
+"Rhowch eich enw gwesteiwr.\n"
+"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
+"megis \"fymlwch.fynesg.fyngho.com\".\n"
+"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
-"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
-"gwasanaethwr ffeil ac argraffu..."
+msgid "Select Printer Spooler"
+msgstr "Dewiswch Sbwlydd Argraffydd"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Trowch eich peiriant i fod yn wasanaethwr dibynadwy"
+msgid "Create new theme"
+msgstr "Creu thema newydd"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Mae amrediad eang o ddarpariaeth Linux, yn ogystal 芒 chynigion arbennig ar "
-"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
+msgid "Mandrake Tools Explanation"
+msgstr "Esboniadau Offer Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Y siop MandrakeSoft swyddogol"
+msgid "No image found"
+msgstr "Heb ganfod delwedd"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Cewch well perfformiad eich cyfrifiadur gyda chymorth dewis o gwmniau sy'n "
-"cynnig atebion proffesiynnol sy'n cydweddu 芒 Mandrake Linux "
+"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
+"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
+"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Estynnwch yr eitemau gorau gan bartneriaid strategol Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Canfyddwyd model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"Mae gan Mandrake Linux offer wedi eu cynllunio i greu'r fersiwn mwyaf diogel "
-"o Linux erioed: Draksec, system o offer rheoli diogelwch, a mur cadarn iawn "
-"wedi eu cyplysu i leihau'r posibilrwydd o hacio."
+"Mae'r Rheolwr Arddangos X11 yn caniat谩u i chi fewngofnodi\n"
+"i'ch system yn raffigol gyda'r X Windows System yn rhedeg. Mae'n cynnal\n"
+"rhedeg amryw o sesiynau X ar eich cyfrifiadur ar yr un pryd."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Y diogelwch mwyaf"
+msgid "if set to yes, run the daily security checks."
+msgstr "os wedi ei osod i iawn, rhedeg y gwiriadau diogelwch dyddiol."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Mae'r cynnyrch ar gael ar safle gwe MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Azerbaijan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Cwblhewch eich gosodiad diogelwch gyda'r feddalwedd hawdd ei defnyddio sy'n "
-"cynnwys darnau o safon uchel megis mur cadarn, gwasanaethwr a chleient "
-"rwydwaith preifat rhithiol (VPN), system canfod ymyrraeth a rheolwr traffig."
+msgid "No tape in %s!"
+msgstr "Dim t芒p yn %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Gwnewch eich rhwydwaith yn ddiogel gyda'r Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (UDA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Ymunwch 芒'r timau cefnogi MandrakeSoft a'r Linux Community ar-lein i rannu "
-"eich gwybodaeth ac i helpu eraill drwy ddod yn Arbenigwr cydnabyddedig ar y "
-"safle cefnogaeth dechnegol."
+"dyma'r bws corfforol i'r ddyfais gael ei gysylltu iddo(e.e. PCI, USB,...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Dewch o hyd i ateb eich anhawsterau drwy blatfform cefnogaeth ar-lein "
-"MandrakeSoft."
+msgid "How is the printer connected?"
+msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Dewch yn MandrakeExpert"
+msgid "Security level"
+msgstr "Lefel diogelwch"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Bydd pob digwyddiad yn cael ei archwilio gan arbenigwr technegol "
-"MandrakeSoft cymwysedig"
+msgid "final resolution"
+msgstr "cydraniad terfynnol"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Platfform arlein i ymateb i anghenion cefnogaeth penodol cwmni"
+msgid "Services"
+msgstr "Gwasanaethau"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corfforaethol"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19565,10 +19603,6 @@ msgstr ""
"gnumeric), darllennydd pdf, ag ati"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Man Gwaith"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Man chwarae"
@@ -19641,10 +19675,6 @@ msgstr ""
"o offer"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Amgylchedd Graffig"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Man Gwaith Gnome"
@@ -19665,10 +19695,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Datblygiad"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Llyfrgelloedd datblygiadol C a C++, rhaglenni a ffeiliau cynnwys"
@@ -19738,29 +19764,92 @@ msgstr ""
"Gwasanaethwr NFS, gwasanaethwr SMB, gwasanaethwr dirprwyol, gwasanaethwr ssh"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Gorfsaf Sain"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr "Casgliad o offer i ddarllen ac anfon e-bost a newyddion ac i bori'r We"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Chwarae sain/rhaglenni golygu"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Cysylltiad 芒'r rhyngrwyd a'i ffurfweddiad "
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Gorsaf fideo"
+#~ msgid "Configure the connection"
+#~ msgstr "Ffurfweddu'r gysylltiad"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Rhaglenni fideo"
+#~ msgid "Disconnect"
+#~ msgstr "Dadgysylltu"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Gorsaf graffeg"
+#~ msgid "Connect"
+#~ msgstr "Cysylltu"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Rhaglenni graffeg"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Medrwch ailffurfweddu eich cysylltiad"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr "Casgliad o offer i ddarllen ac anfon e-bost a newyddion ac i bori'r We"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Medrwch gysylltu 芒'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Nid ydych wedi eich cysylltu 芒'r Rhyngrwyd."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Rydych wedi eich cysylltu 芒'r Rhyngrwyd."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "anfon ffeil drwy FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Ail gychwyh 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Ysgrifennu %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Cop茂o %s i %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Cadw %s i %s.old wrth gefn"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "trosi ffontiau ttf "
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Trosiad ffontiau"
+
+#~ msgid "Author:"
+#~ msgstr "Awdur"
+
+#~ msgid "Audio station"
+#~ msgstr "Gorfsaf Sain"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Chwarae sain/rhaglenni golygu"
+
+#~ msgid "Video station"
+#~ msgstr "Gorsaf fideo"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Rhaglenni fideo"
+
+#~ msgid "Graphic station"
+#~ msgstr "Gorsaf graffeg"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Rhaglenni graffeg"
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
index adb712328..8048b716a 100644
--- a/perl-install/share/po/da.po
+++ b/perl-install/share/po/da.po
@@ -1,978 +1,1898 @@
+# translation of da.po to Danish
# danish DrakX
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Keld Simonsen <keld@dkuug.dk>, 2000-2003.
+# Copyright (C) 2000,2003 Free Software Foundation, Inc.
# Troels Liebe Bentsen <tlb@iname.com> 2000.
#
# Reviewed: keld@dkuug.dk 2001-08-22
+# Keld Simonsen <keld@dkuug.dk>, 2000-2003.
#
msgid ""
msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-03-31 00:29+0200\n"
+"Project-Id-Version: da\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-05-15 03:58+0200\n"
"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
"Language-Team: Danish <dansk@klid.dk>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Skanner partitioner for at finde monteringspunkter"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "hvis sat til ja, s tjek tilf鴍elser og fjernelser af suid root-filer."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port for netv鎟ksprinter"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Inds鎡 diskette:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Deling per bruger bruger gruppen 'fileshare'. \n"
-"Du kan bruge userdrake til at tilf鴍e en bruger til denne gruppe."
+"Kopien af partitionstabellen har ikke samme st鴕relse\n"
+"Forts鎡 alligevel?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Annull閞"
+msgid "Which username"
+msgstr "Hvilket brugernavn"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Start userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Hvilken type 鴑sker du at tilf鴍e"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Genskaber partitionstabel"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "P CUPS-server '%s'"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Konfiguration efter installation"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Benyt ``%s'' i stedet"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Type"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"豱sker du at tillade brugere at eksportere nogle kataloger i deres "
-"hjemmekatalog?\n"
-"Tilladelse af dette vil s鎡te brugere i stand til simpelthen at klikke p "
-"'Fildeling' i konqueror og nautilus.\n"
+"\n"
+"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
+"CUPS egne drivere kan heller ikke overflyttes."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Kr鎣et pakke %s mangler"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"De f鴏gende printere\n"
+"\n"
+"%s%s\n"
+"er direkte tilsluttet til dit system"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s skal v鎟e installeret. 豱sker du at installere den?"
+msgid "Central African Republic"
+msgstr "Centralafrikanske Republik"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Tilpasset"
+msgid "Gateway device"
+msgstr "Gateway enhed"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Tillad alle brugere"
+msgid "Net Method:"
+msgstr "Netmetode:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Ingen fildeling"
+msgid "Ethernetcard"
+msgstr "Ethernet-kort"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Mere"
+msgid "Parameters"
+msgstr "Parametre"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Her er den komplette liste over tilg鎛gelige lande"
+msgid "Auto-detect"
+msgstr "Automatisk detektion"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "V鎙g dit land."
+msgid "Interface:"
+msgstr "Gr鎛seflade:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid " / Region"
-msgstr " / Region"
+msgid "Select installation class"
+msgstr "V鎙g installations-metode"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Land"
+msgid "on CDROM"
+msgstr "p cd-rom"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Alle sprog"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Det lader ikke til at dit system har forbindelse til Internettet.\n"
+"Pr鴙 at omkonfigurere din forbindelse."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Brug ISO 10646 som standard"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
+"tilslutte sig til den som klienter.\n"
+"\n"
+"豱sker du virkelig at forts鎡te med at ops鎡te din printer som du g鴕 nu?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Hviderusland"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Fejl ved skrivning til fil %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Du kan v鎙ge andre sprog der vil v鎟e tilg鎛gelige efter installationen"
+"apmd bruges til at overv錱e batteristatus og skrive log til syslog.\n"
+"Den kan ogs bruges til at lukke maskinen n錼 batteriet er p lav."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "V鎙g det sprog, der skal bruges."
+msgid "Use tape to backup"
+msgstr "brug b錸d til sikkerhedskopieringen"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "V鎙g den vinduesh錸dtering du 鴑sker at benytte:"
+msgid "The following packages are going to be installed"
+msgstr "De f鴏gende pakker vil blive installeret"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "V鎙g den forvalgte bruger:"
+msgid "CUPS configuration"
+msgstr "CUPS-konfiguration"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "豱sker du at bruge denne facilitet?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ikke nok fri plads til at tildele nye partitioner"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "Flytter"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"Jeg kan s鎡te din maskine op til automatisk at logge en bestemt bruger p."
+"\n"
+"Drakbackup aktiviteter via %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Autologin"
+msgid "("
+msgstr "("
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Icon"
-msgstr "Ikon"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Velkommen til Netv鎟kskonfigurations-vejlederen\n"
+"\n"
+"Vi skal til at konfigurere din internet- eller netv鎟ksforbindelse.\n"
+"Hvis du ikke 鴑sker at bruge autodetektering, s frav鎙g afkrydsningsboksen\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Shell"
-msgstr "Skal"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
+msgid "Lebanon"
+msgstr "Libanon"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Password"
-msgstr "Adgangskode"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "User name"
-msgstr "Brugernavn"
+msgid "Stop"
+msgstr "Stop"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "Rigtige navn"
+msgid "Edit selected host"
+msgstr "Redig閞 valgte v鎟t"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Accept user"
-msgstr "Accept閞 bruger"
+msgid "No CD device defined!"
+msgstr "Ingen cd-enhed defineret!"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Done"
-msgstr "F鎟dig"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgarsk (fonetisk)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "Begyndelses-ip p DHCP"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kb"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Systemopstarterens hovedindstillinger"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Indtast en bruger\n"
-"%s"
+"[--manual] [--device=enhed] [--update-sane=sane_kilde_kat] [--update-"
+"usbtable] [--dynamic=enhed]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Add user"
-msgstr "Tilf鴍 bruger"
+msgid "Tape"
+msgstr "B錸d"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Dette brugernavn eksisterer allerede"
+msgid "Scanning network..."
+msgstr "Skanner netv鎟k ..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "Dette brugernavn er for langt"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Med denne valgmulighed vil du v鎟e i stand til at kunne genskabe\n"
+"enhver version af dit /etc katalog."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet m kun indeholde sm bogstaver, tal, `-' og `_'"
+msgid "Malaysia"
+msgstr "Malaysia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Indtast et brugernavn"
+msgid "Swiss (French layout)"
+msgstr "Schweizisk (Fransk layout)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid fejlede (m錽ke mangler raidtools?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Webcam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "St鴕relse p (andet niveau) cpu-mellemlagret"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "Lydkort"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
+"kommandoen '%s <fil>'.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Pr鴙 igen"
+msgid "Level %s\n"
+msgstr "Niveau %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
+msgid "Luxembourg"
+msgstr "Luxemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilf鴍et %s)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup D鎚on-Rapport\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "adgang til overs鎡telsesv鎟kt鴍er"
+msgid "Iran"
+msgstr "Iran"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "adgang til netv鎟ksv鎟kt鴍er"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "adgang til administrative filer"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "tillad \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "adgang til rpm-v鎟kt鴍er"
+msgid "Configuring..."
+msgstr "Konfigurerer..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "adgang til X-programmer"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Indstilling er allerede gjort. og er for n鎟v鎟ende aktiv."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Her er f鴏gende typer indgange.\n"
-"Du kan tilf鴍e flere eller 鎛dre de eksisterende."
+"For de fleste moderne tv-kort vil bttv-modulet fra GNU/Linux-kernen blot "
+"automatisk finde de rette parametre.\n"
+"Hvis dit kort ikke findes korrekt, kan du gennemtvinge den rette tuner og "
+"korttyper her. Bare v鎙g dit tv-korts parametre om n鴇vendigt"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Andet styresystem (Windows...)"
+msgid "Password (again)"
+msgstr "Adgangskode (igen)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
+msgid "Search installed fonts"
+msgstr "S鴊 efter installerede skrifttyper"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP-adresse"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type 鴑sker du at tilf鴍e"
+msgid "Choose the sizes"
+msgstr "V鎙g st鴕relserne"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Denne m鎟kat er allerede brugt"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Liste over data der er 鴇elagt:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Du skal angive en root-partition"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Dit modem ier ikke underst鴗tet af systemet.\n"
+"Tag og kig p http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Du skal angive en kerne-fil"
+msgid "Choose another partition"
+msgstr "V鎙g en ny partition"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Tom m鎟kat er ikke tilladt"
+msgid "Current user"
+msgstr "Aktuelle bruger"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "Forvalgt"
+msgid "Username"
+msgstr "Brugernavn"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "Ingen video"
+msgid "Left \"Windows\" key"
+msgstr "Venstre Windows-tast"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-st鴕relse"
+msgid "dhcpd Server Configuration"
+msgstr "Konfiguration af dhcp-server"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "Vedh鎓t"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Brugt til katalog:\n"
+" kun ejeren af kataloget eller filen i dette katalog kan slette den"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "M鎟kat"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Usikker"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " p Novell-server \"%s\", printer \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "Tabel"
+msgid "Remove a module"
+msgstr "Fjern et modul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Root"
-msgstr "Rod"
+msgid "Password"
+msgstr "Adgangskode"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-write"
-msgstr "L鎠-skriv"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumenter: (max, inaktiv=-1)\n"
+"\n"
+"S鎡 adgangskodefor鎙delse til \\fImax\\fP dage og forsinkelse med 鎛dring "
+"til til \\fIinaktiv\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "Avanceret konfiguration"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Video mode"
-msgstr "Videoindstilling"
+msgid "Scanning on your HP multi-function device"
+msgstr "Skanning p din HP-multifunktionsenhed"
#: ../../any.pm:1
#, c-format
-msgid "Image"
-msgstr "Billede"
+msgid "Root"
+msgstr "Rod"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
+msgid "Choose an existing RAID to add to"
+msgstr "V鎙g en eksisterende RAID som skal udvides"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Skal det v鎟e muligt at starte fra OF?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Tyrkisk (moderne \"Q\" model)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Skal det v鎟e muligt at starte fra CD?"
+msgid "Lilo message not found"
+msgstr "Lilo-besked ikke fundet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid f鴕 kerneopstart"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automatisk regenerering af kernehoved i /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "舃en firmwareforsinkelse"
+msgid "if needed"
+msgstr "hvis n鴇vendigt"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot device"
-msgstr "Opstartsenhed"
+msgid "Restore Failed..."
+msgstr "Genskabelse mislykkedes..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Init Message"
-msgstr "Init-besked"
+msgid "/Autodetect _jazz drives"
+msgstr "/Autodetekt閞 _jazz-drev"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Beskrivelse:\n"
+"\n"
+" Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
+" I konfigurationen kan du v鎙ge: \n"
+"\t- Systemfiler, \n"
+"\t- Brugeres filer, \n"
+"\t- Andre filer.\n"
+"\teller Hele dit system ... eller Andet (s錽om Windows partitioner)\n"
+"\n"
+" Drakbackup lader dig tage sikkerhedskopier af dit system p:\n"
+"\t- Ddisk.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- B錸d.\n"
+"\n"
+" Drakbackup lader dig genskabe dit system p錦n"
+" et katalog valgt af brugeren.\n"
+"\n"
+" Som standard vil alle sikkerhedskopier blive lagret i dit\n"
+" /var/lib/drakbackup katalog\n"
+"\n"
+" Konfigurationsfil:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Genskabelsestrin:\n"
+" \n"
+" I genskabelsestrinnet vil Drakbackup fjerne dit nuv鎟ende katalog \n"
+" og kontrollere at alle dine backupfiler ikke er 鴇elagte. Det \n"
+" anbefales at du laver en sidste sikkerhedskopiering f鴕 genskabelse.\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+# Mangler
+#: ../../install_messages.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Introduktion\n"
+"\n"
+"Operativsystemet og de forskellige komponenter tilg鎛gelige i Mandrake Linux "
+"distributionen vil herefter blive kaldt \"programmelprodukter\". "
+"Programmelprodukterne inkluderer, men er ikke begr鎛set til: samlingen af "
+"v鎟kt鴍er, metoder, regler og dokumentation relateret til operativsystemet "
+"og de forskellige komponenter i Mandrake Linux-distributionen.\n"
+"\n"
+"\n"
+"1. Licensaftale\n"
+"\n"
+"L鎠 venligst dette dokument omhyggeligt. Dette dokument er en licensaftale "
+"mellem dig og MandrakeSoft S.A., som g鎙der til disse programmelprodukter. "
+"Ved at installere, kopiere eller bruge disse programmelprodukter accepterer "
+"du udtrykkeligt og fuldt ud denne licensaftale med dens betingelser og "
+"regler. Hvis du er uenig i nogensomhelst del af denne licens, mister du "
+"retten til at installere, kopiere eller bruge disse programmelprodukter. "
+"Hvilket som helst fors鴊 p at installere, kopiere eller bruge disse "
+"programmelprodukter p en m錮e som ikke er i overensstemmelse med "
+"betingelserne og reglerne i denne licens er ulovlig og vil betyde at du "
+"mister dine rettighedder under denne licens. Hvis dette sker, skal du med "
+"det samme 鴇el鎔ge alle kopier af disse programmelprodukter.\n"
+"\n"
+"\n"
+"2. Begr鎛set garanti\n"
+"\n"
+"Programmelprodukterne og tilh鴕ende dokumenter leveres \"som de er\", uden "
+"nogen form for garanti, i den udstr鎘ning lov tillader. MandrakeSoft S.A. "
+"vil under ingen omst鎛digheder undtagen hvad lov foreskriver v鎟e ansvarlig "
+"for specielle, tilf鎙dige, direkte eller indirekte tab af nogen art "
+"(inkluderende uden begr鎛sninger, skader ved tab af forretning, "
+"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
+"som resultat af en retssag eller nogen anden form for f鴏getab) opst錯t "
+"under brugen eller mangel p samme af disse programmelprodukter, selv hvis "
+"MandrakeSoft S.A. er blevet gjort opm鎟ksom p muligheden for eller "
+"indtr鎓felsen af s錮anne skader.\n"
+"\n"
+"BEGR芅SET ANSVAR MED HENSYN TIL REGLER OM BESIDDELSE ELLER BRUG AF FORBUDT "
+"PROGRAMMEL I VISSE LANDE\n"
+"\n"
+"I den udstr鎘ning som loven tillader vil MandrakeSoft S.A. eller deres "
+"distribut鴕er under ingen omst鎛digheder v鎟e ansvarlig for specielle, "
+"tilf鎙dige, direkte eller indirekte tab af nogen art (inklusive uden "
+"begr鎛sninger skader ved tab af forretning, forstyrrelser af forretning, "
+"finansielle tab, advokatbistand, erstatninger som resultat af en retssag "
+"eller nogen anden form for tab) opst錯t ved besiddelse eller brug af "
+"programmelkomponenter eller opst錯t ved hentning af programmelkomponenter "
+"fra et af Mandrake Linux webstederne som er forbudt eller begr鎛set i visse "
+"lande ved lokal lov. Dette begr鎛sede ansvar g鎙der, men er ikke begr鎛set "
+"til, de st鎟ke krypteringskomponenter inkluderet i programmelprodukterne.\n"
+"\n"
+"\n"
+"3. GPL-licensen og relaterede licenser\n"
+"\n"
+"Dette programmel best錼 af komponenter lavet af forskellige personer eller "
+"enheder. De fleste af disse komponenter bliver reguleret efter vilk錼ene og "
+"aftalerne i GNU General Public License, herefter kaldet \"GPL\", eller "
+"lignende licenser. De fleste af disse licenser tillader dig at bruge, "
+"kopiere, tilpasse eller redistribuere komponenterne, de d鎘ker. L鎠 venligst "
+"vilk錼ene og betingelserne i licensaftalen for hver komponent omhyggeligt "
+"f鴕 du bruger det. Alle sp鴕gsm錶 ang錯nde en komponent bedes adresseret til "
+"komponentens forfatter og ikke til MandrakeSoft. Programmerne udviklet af "
+"MandrakeSoft S.A. bliver reguleret efter GPL-licensen. Dokumentationen "
+"skrevet af MandrakeSoft S.A. bliver reguleret efter en specifik licens. "
+"Refer閞 venligst til dokumentationen for yderligere detaljer.\n"
+"\n"
+"\n"
+"4. Intellektuelle rettigheder\n"
+"\n"
+"Alle rettigheder til komponenterne i programmelproduktet tilh鴕er deres "
+"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
+"ophavsretslove, g鎙dende for programmel. MandrakeSoft S.A. forbeholder sine "
+"rettigheder til at 鎛dre eller tilpasse programmelprodukterne, helt eller "
+"delvist, med alle midler og til alle form錶. \"Mandrake\", \"Mandrake Linux"
+"\" samt de tilh鴕ende logoer er varem鎟ker for MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Styrende love\n"
+"\n"
+"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
+"en domstolsafg鴕else, vil disse dele blive ekskluderet fra denne kontrakt. "
+"Du vil forblive bundet af de andre g鎙dende dele af aftalen. Vilk錼ene og "
+"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
+"vedr鴕ende vilk錼ene i denne licens vil fortrinsvist blive l鴖t udenfor "
+"domstolene. Som en sidste udvej vil uenighederne blive h錸dteret ved den "
+"rette domstol i Paris, Frankrig. Ved sp鴕gsm錶 omkring dette dokument, "
+"kontakt venligst MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-"Indstillingen ``Begr鎛s kommandolinie-indstillinger'' er intet v鎟d uden\n"
-"en adgangskode"
+"x-koordinatet for forl鴅sindikatorens\n"
+"鴙re venstre hj鴕ne"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-st鴕relse i Mb"
+msgid "Current interface configuration"
+msgstr "Aktuelle gr鎛sesnitskonfiguration"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Aktiv閞 multiprofiler"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer D鎚on"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pr鎐is RAM-m鎛gde, hvis p錵r鎣et (fandt %d Mb)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Hvis du har et ISA kort burde v鎟diene i n鎠te billede v鎟e rigtige.\n"
+"\n"
+"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
+msgid "Do not print any test page"
+msgstr "Udskriv ikke nogen testsider"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Opret opstartsdiskette"
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
-msgid "restrict"
-msgstr "begr鎛s"
+msgid "Force No APIC"
+msgstr "Gennemtving ingen ACPI"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Begr鎛s kommandolinie-indstillinger"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Denne adgangskode er for nemt at g鎡te (det skal mindst v鎟e p %d tegn)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Force No APIC"
-msgstr "Gennemtving ingen ACPI"
+msgid "[keyboard]"
+msgstr "[tastatur]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Aktiv閞 ACPI"
+msgid "FTP proxy"
+msgstr "FTP-proxy"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Ventetid f鴕 opstart af forvalgt styresystem"
+msgid "Install List"
+msgstr "Installationsliste"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "compact"
-msgstr "kompakt"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"苙dr\n"
+"Genskabelsessti"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "Kompakt"
+msgid "Show only for the selected day"
+msgstr "Vis kun for den valgte dag"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Systemopstarterens installation"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ-oversigt\n"
+"\t\t\t \n"
+" - Lav Etherboot-aktiverede opstartsaftryksfiler:\n"
+" \t\tFor at starte med en kerne via etherboot skal en speciel kerne/"
+"initrd-aftryksfil oprettes.\n"
+" \t\tmkinitrd-net laver meget af dette arbejde og drakTermServ er "
+"bare en grafisk gr鎛seflade\n"
+" \t\tfor at hj鎙pe til med at h錸dtere/鎛dre p disse aftryksfiler.\n"
+"\n"
+" - Vedligeholdelse af /etc/dhcpd.conf:\n"
+" \t\tFor at starte klientene over netv鎟k beh鴙er hver klient en "
+"indgang i dhcpd.conf, som udleverer en IP-adresse\n"
+" \t\tog netv鎟ksopstart-aftryksfiler til maskinen. drakTermServ "
+"hj鎙per til med at lave/fjerne disse indgange.\n"
+"\t\t\t\n"
+" \t\t(PCI-kort kan undlade aftryksfilen - etherboot vil eftersp鴕ge "
+"den rigtige aftryksfil. Du b鴕\n"
+" \t\togs bem鎟ke at n錼 etherboot ser efter aftryksfilerne forventer "
+"den navne som\n"
+" \t\tboot-3c59x.nbi, fremfor boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tEt typisk dhcpd.conf-afsnit for at underst鴗te diskl鴖e klienter "
+"ser s錮an ud:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tMens du kan bruge en p鴏 af IP-adresser, fremfor at ops鎡te en "
+"specifik ops鎡ningsindgang for\n"
+"\t\t\ten klientmaskine, vil brug af faste adresser lette\n"
+"brugen\n"
+"\t\t\taf klientspecifikke konfigurationsfiler som ClusterNFS tilbyder.\n"
+"\t\t\t\n"
+"\t\t\tBem鎟k: \"#type\"-indgangen er kun brugt af drakTermServ. Klienter "
+"kan enten v鎟e \"tynde\"\n"
+"\t\t\teller 'tykke'. Tynde klienter k鴕er st鴕steparten af programmellet "
+"via xdmcp, mens tykke klienter k鴕er st鴕steparten\n"
+"af programmellet p klientmaskinen. En speciel inttab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ bliver\n"
+"\t\t\tskrevet for tynde klienter. Systemkonfigurationsfilerne xdm-config, "
+"kdmrc, og gdm.conf bliver 鎛drede\n"
+"\t\t\thvis tynde klienter bliver brugt, for at aktivere xdmcp. Idet der er "
+"sikkerhedsproblematik omkring brugen af xdmcp,\n"
+"\t\t\ts bliver hosts.deny og hosts.allow 鎛dret for at begr鎛se adgangen "
+"til det lokale subnet.\n"
+"\t\t\t\n"
+"\t\t\tBem鎟k: Du skal stoppe/starte serveren efter at have tilf鴍et eller "
+"鎛dret klienter.\n"
+"\t\t\t\n"
+" - Vedligeholdelse af /etc/exports:\n"
+" \t\tClusternfs lader dig eksportere rod-filsystemet til diskl鴖e "
+"klienter, drakTermServ\n"
+" \t\tops鎡ter de rigtige indgange for at tillade anonym adgang til "
+"rod-filsystemet fra\n"
+" \t\tdiskl鴖e klienter.\n"
+"\n"
+" \t\tEn typisk eksporterings-indgang for clusternfs er:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASKE(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tHvor SUBNET/MASKE bliver defineret for dit netv鎟k.\n"
+" \t\t\n"
+" - Vedligeholdelse af /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor at brugere skal kunne logge ind p systemet fra en diskl鴖 "
+"klient, s m deres indgang i\n"
+" \t\t/etc/shadow kopieres ind i /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ hj鎙per til\n"
+" \t\tved at tilf鴍e og slette brugere fra denne fil.\n"
+"\n"
+" - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tVia clusternfs kan hver diskl鴖 klient have deres egen unikke "
+"konfigurationsfil\n"
+" \t\tp rod-filsystemet p serveren. I fremtiden vil drakTermServ "
+"kunne hj鎙pe til med at lave disse\n"
+" \t\tfiler.\n"
+"\n"
+" - Per klient systemkonfigurationsfiler:\n"
+" \t\tVia clusternfs kan hver diskl鴖 klient have deres egne unikke "
+"konfigurationsfiler\n"
+" \t\tp rod-filesystemet p serveren. I fremtiden vil drakTermServ "
+"kunne hj鎙pe til med at oprette disse filer\n"
+" \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
+"sysconfig/keyboard p per klient\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ vil konfigurere denne fil til at virke sammen med "
+"aftryksfilerne som bliver oprettet af\n"
+" \t\tmkinitrd-net, og indgangene i /etc/dhcpd.conf, for at udlevere "
+"netv鎟ks-opstartsaftryksfilerne til hver \n"
+" \t\tdiskl鴖 klient.\n"
+"\n"
+" \t\tEn typisk tftp-konfigurationsfil ser s錮an ud:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\t苙dringen her fra den normale installation er 鎛dringen af "
+"disable-flaget til\n"
+" \t\t'no' og 鎛dring af filstien til /var/lib/tftpboot, hvor mkinitrd-"
+"net\n"
+" \t\tplacere sine aftryksfiler.\n"
+"\n"
+" - Opret etherboot-disketter/CD'er:\n"
+" \t\tDe diskl鴖e klientmaskiner beh鴙er enten ROM aftryksfiler p "
+"netv鎟kskortet, en opstartsdiskette\n"
+" \t\teller en CD for at initiere opstartssekvensen. drakTermServ vil "
+"hj鎙pe til med generere disse aftryksfiler,\n"
+" \t\tbaseret p netv鎟kskortet i klientmaskinen.\n"
+" \t\t\n"
+" \t\tEt basiseksempel p oprettelse af en opstartsdiskette for 3Com "
+"3c509 manuelt:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "F鴕ste sektor af opstartspartition"
+msgid "512 kB"
+msgstr "512 kb"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "F鴕ste sektor p disken (MBR)"
+msgid "Logs"
+msgstr "Logger"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Bem鎟k: Parallelle porte kan ikke auto-detekteres)"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO-installering"
+msgid "What kind of card do you have?"
+msgstr "Hvad slags kort har du?"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Spring over"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "P diskette"
+msgid "Security"
+msgstr "Sikkerhed"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "F鴕ste sektor af rodpartitionen"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Du kan ogs bruge den grafiske gr鎛seflade 'xpdq' til at s鎡te "
+"valgmuligheder og behandle udskriftsopgaver.\n"
+"Hvis du bruger KDE som skrivebordsmilj, har du en 'panik-knap', en ikon p "
+"skrivebordet, ben鎣nt med 'STOP printer!', som stopper alle udskriftsopgaver "
+"鴍eblikkeligt n錼 du klikker p den. Dette er fx nyttigt hvis papiret "
+"kr鴏ler sammen.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown"
+msgstr "Ukendt"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Denne server er allerede p listen, og kan ikke blive tilf鴍et igen.\n"
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Konfigur閞 netv鎟k"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Du besluttede at installere opstartsindl鎠eren p en partition.\n"
-"Dette indikerer at du allerede har en opstartsindl鎠er p disken som du "
-"starter op fra (fx System Commander).\n"
-"\n"
-"Hvilket drev starter du op fra?"
+"Protokol for resten af verden \n"
+" ingen D-kanal (lejet linje)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Opretter opstartsdiskette..."
+msgid "Option %s must be a number!"
+msgstr "Valg %s skal v鎟e et tal!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inds鎡 en diskette i %s"
+msgid "Notice"
+msgstr "Bem鎟k"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "V鎙g det diskette-drev, du vil benytte til at lave boot-disketten"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+" Aktiv閞/deaktiv閞 daglig sikkerhedskontrol."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Andet diskette-drev"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Aktiv閞/deaktiv閞 'crontab' og 'at' for brugere. Put tilladte brugere i /etc/"
+"cron.allow og /etc/at.allow\n"
+"(se man at(1) og crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "F鴕ste diskette-drev"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
+"Du har ikke konfigureret X. Er du sikker p at du virkelig 鴑sker dette?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Der er desv鎟re ikke noget tilg鎛geligt diskette-drev"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Konfigurationen af printeren vil ske helt automatisk. Hvis din printer ikke "
+"blev fundet korrekt eller hvis du foretr鎘ker en tilpasset "
+"printerkonfiguration, s sl 'Manuel konfiguration' til."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Hvilken slags partitionering?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at v鎟e "
-"afh鎛gig af den normale opstarter. Det kan v鎟e nyttigt, hvis du ikke vil "
-"installere LILO (eller grub) p dit system - eller hvis et andet "
-"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
-"En tilpasset opstartsdiskette kan ogs bruges sammen med Mandrakes `rescue "
-"image', hvilket g鴕 det meget nemmere at reparere systemet i tilf鎙de af "
-"systemnedbrud. \n"
-"Vil du lave en opstartsdiskette til dit system?\n"
-"%s"
+"filliste sendt via FTP: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Gr鎛seflade"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"beskrivelse af valgmuligheder:\n"
+"\n"
+" - Lav sikkerhedskopi af systemfiler:\n"
+" \n"
+"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
+"\tsom indeholder alle konfigurationsfiler. V鎟 \n"
+"\tforsigtig p genskabelsestrinnet med ikke at overskrive:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Lav sikkerhedskopi af brugerfiler: \n"
+"\n"
+"\tDenne mulighed lader dig v鎙ge alle de brugere som du vil lave\n"
+"\tsikkerhedskopier for.\n"
+"\tFor at spare p diskplads anbefales du ikke medtager netl鎠eres\n"
+"\tcache.\n"
+"\n"
+" - Lav sikkerhedskopi af andre filer: \n"
+"\n"
+"\tDenne mulighed lader dig tilf鴍e mere data som skal gemmes.\n"
+"\tMed denne sikkerhedskopieringsm錮e er det ikke muligt i 鴍eblikket \n"
+"\tat v鎙ge inkrementalbackup.\t\t\n"
+" \n"
+" - Inkrementalbackupper:\n"
+"\n"
+"\tInkrementalbackup er den st鎟keste valgmulighed for \n"
+"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
+"\talle dine data den f鴕ste gang, og derefter kun de 鎛drede data.\n"
+"\tS vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
+"\tangivet dato.\n"
+"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
+"\tsikkerhedskopier blive slettet f鴕 hver sikkerhedskopiering. \n"
"\n"
"\n"
-"(ADVARSEL! Du bruger XFS til din root-partition,\n"
-"oprettelse af en opstartsdiskette p en 1.44 Mb diskette vil formentlig\n"
-"mislykkes, fordi XFS kr鎣er en meget stor driver)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
-"v鎟e afh鎛gig af den normale opstarter. Det kan v鎟e nyttigt, hvis du ikke "
-"vil installere SILO p dit system - eller hvis et andet operativsystem "
-"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
-"opstartsdiskette kan ogs bruges sammen med Mandrakes `rescue image', "
-"hvilket g鴕 det meget nemmere at reparere systemet i tilf鎙de af "
-"systemnedbrud.\n"
+"Argumenter: (arg, udtryk='*.*', dev='tty12')\n"
"\n"
-"Hvis du 鴑sker at lave en opstartsdiskette til dit system, inds鎡 en "
-"diskette i dit f鴕ste diskettedrev og tryk 'Ok'."
+"Aktiv閞/deaktiv閞 syslog-rapporter til konsol 12. \\fIudtryk\\fP er\n"
+"udtrykket der beskriver hvad der skal logges (se syslog.conf(5) for flere "
+"detaljer) og\n"
+"'dev' enheden som loggen skal rapporteres p."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindl鎠eren p en %s-partition\n"
+msgid "comma separated strings"
+msgstr "kommaseparerede strenge"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Dette er maskinerne fra hvilke skannerne skal bruges:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den fremh鎣ede mulighed vil blive startet automatisk om %d sekunder."
+msgid "Messages"
+msgstr "Beskeder"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoerne f鴕 opstart, eller 'c' for en kommandolinie."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Ukendt|CPH06X (bt878) [mange leverand鴕er]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
+msgid "POP and IMAP Server"
+msgstr "POP- og IMAP-server"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Brug tasterne %c og %c til at v鎙ge mellem mulighederne."
+msgid "Mexico"
+msgstr "Mexico"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB styresystemsv鎙geren!"
+msgid "Model stepping"
+msgstr "Modelserie"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Har du nogen %s gr鎛sesnit?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
+msgid "Switzerland"
+msgstr "Schweiz"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
+msgid "Brunei Darussalam"
+msgstr "Brunei"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Parametre til ekstern lpd"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Velkommen til %s styresystems-v鎙geren!\n"
+"GNU/Linux er et flerbrugersystem, det vil sige at hver bruger kan have sine "
+"egne pr鎓erencer, sine egne filer og s videre. Du kan l鎠e "
+"startvejledningen for at l鎟e mere om flerbrugersystemer.\n"
+"I mods鎡ning til root, som er administratoren, vil brugerne som du tilf鴍er "
+"her ikke have lov til at 鎛dre nogetsomhelst undtagen deres egne filer og "
+"deres egne ops鎡ninger, hvilket beskytter systemet mod utilsigtede eller "
+"ondartede 鎛dringer som p鍁irker hele systemet. Du skal oprette i det "
+"mindste 閚 almindelig bruger til dig selv - dette er den konto som du b鴕 "
+"bruge til almindelig dagligt brug. Selvom det er meget nemt at logge ind som "
+"root for at g鴕e alt, kan det ogs v鎟e meget farligt!\n"
+"En meget simpel fejltagelse kan betyde at dit system ikke virker mere. Hvis "
+"du laver en alvorlig fejltagelse som almindelig bruger, vil det v鎟ste der "
+"kan ske at du vil tabe nogen information, men det vil ikke p鍁irke hele "
+"systemet.\n"
"\n"
-"V鎙g et styresystem i den ovenst錯nde liste eller\n"
-"vent %d sekunder for at starte standard.\n"
+"Det f鴕ste felt sp鴕ger efter dit rigtige navn. Dette er naturligvis ikke "
+"kr鎣et -du kan faktisk skrive hvad du lyster. DrakX vil bruge det f鴕ste ord "
+"du indtastede i feltet og kopiere det til '%s'-feltet, hvilket er navnet, "
+"som denne bruger skal indtaste for at logge ind p systemet. Hvis du 鴑sker "
+"det kan du overskrive det forvalgte of 鎛dre brugernavnet. Det n鎠te trin er "
+"at indtaste en adgangskode. Fra et sikkerhedsm鎠sigt synspunkt er "
+"adgangskoden for en ikke-priviligeret (normal) bruger er ikke s vigtigt som "
+"det for Root, men det er ingen grund til at negligere det alligevel, ved at "
+"lade det v鎟e blankt eller at g鴕e det for nemt - n錼 det kommer til stykket "
+"er dine egne filer der er i fare.\n"
+"\n"
+"N錼 du har klikket p '%s', kan du tilf鴍e andre brugere. Tilf鴍 en bruger "
+"for hver af dine venner: fx din far og din s鴖ter. N錼 du har tilf鴍et alle "
+"de brugere du 鴑sker, v鎙g da '%s ->'.\n"
"\n"
+"Klik p '%s'-knappen lader dig 鎛dre standard-sk醠 for denne bruger\n"
+"(bash er standard). \n"
+"\n"
+"N錼 du er f鎟dig med at tilf鴍e brugere, vil du blive spurgt om at v鎙ge en "
+"bruger som automatisk kan logge ind p systemet n錼 maskinen startes op. "
+"Hvis du er interesseret i denne facilitet (og ikke k鎟er dig synderligt om "
+"lokal sikkerhed), s v鎙g den 鴑skede bruger og vinduesh錸dtering og klik '%"
+"s ->'.\n"
+"Hvis du ikke er interesseret i denne facilitet, s afmark閞 boksen med '%s'"
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "konsolhj鎙per mangler"
+msgid "Configure Internet Access..."
+msgstr "Konfigur閞 Internetadgang..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mangler"
+msgid "Norway"
+msgstr "Norge"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "豭ebliksbilleder vil v鎟e tilg鎛gelige efter installation i %s"
+msgid "Danish"
+msgstr "Dansk"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan ikke lave 鴍ebliksbilleder f鴕 partitionering"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
+"opstart."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
+"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minut"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux installationen er fordelt p flere cdrom-er. DrakX v閐 om en "
+"valgt pakke ligger p en anden cdrom, s den vil udskyde den aktuelle cd og "
+"bede dig om at is鎡te den rigtige, om n鴇vendigt."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
+msgid "Processors"
+msgstr "Processorer"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "Tb"
+msgid "Bulgaria"
+msgstr "Bulgarien"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "Gb"
+msgid "No NIC selected!"
+msgstr "Ingen NIC valgt!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "Mb"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard og Jan Mayen 鴈rne"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "Kb"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Problemer indtraf under konfigurationen.\n"
+"Afpr鴙 din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
+"virker, kan du pr鴙e at genstarte konfigurationen."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "U.S.A."
+msgid "partition %s is now known as %s"
+msgstr "partition %s er nu kendt som %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "豷trig"
+msgid "Backup Other files..."
+msgstr "Sikkerhedskopi閞 andre filer..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italien"
+msgid "SMB server IP"
+msgstr "SMB-serverens IP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Holland"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Sverige"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Partitionstabellen for disk %s vil nu blive skrevet p disken!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norge"
+msgid "Installing HPOJ package..."
+msgstr "Installerer HPOJ-pakke..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Gr鎘enland"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at v鎟e "
+"afh鎛gig af den normale opstarter. Det kan v鎟e nyttigt, hvis du ikke vil "
+"installere LILO (eller grub) p dit system - eller hvis et andet "
+"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
+"En tilpasset opstartsdiskette kan ogs bruges sammen med Mandrakes `rescue "
+"image', hvilket g鴕 det meget nemmere at reparere systemet i tilf鎙de af "
+"systemnedbrud. \n"
+"Vil du lave en opstartsdiskette til dit system?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Tyskland"
+msgid ", USB printer \\#%s"
+msgstr ", USB printer \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Tjekkiet"
+msgid "Latvian"
+msgstr "Lettisk"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgien"
+msgid "monthly"
+msgstr "m錸edligt"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Frankrig"
+msgid "Module name"
+msgstr "Modulnavn"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Start ved opstart"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fejl ved 錬ning af %s for skrivning: %s"
+msgid "First sector of drive (MBR)"
+msgstr "F鴕ste sektor p disken (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Ingenting at lave"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
+msgid "Use Unicode by default"
+msgstr "Brug ISO 10646 som standard"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2/ext3, reiserfs, xfs eller jfs) til "
-"dette monteringspunkt\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "modulet i GNU/Linux-kernen som h錸dterer denne enhed"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog b鴕 ligge p rod-filsystemet"
+msgid "Trying to rescue partition table"
+msgstr "Fors鴊er at redde partitionstabellen"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
+msgid "Option %s must be an integer number!"
+msgstr "Valg %s skal v鎟e et helt tal!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan h錸dtere dette uden en /boot partition.\n"
-"V鎟 sikker p at tilf鴍e en /boot partition"
+"Indgange som du skal udfylde:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Kan ikke starte levende opgradering!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Monteringspunkter b鴕 kun indeholde bogstaver og tal"
+msgid "Name: "
+msgstr "Navn: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
+msgid "16 million colors (24 bits)"
+msgstr "16 millioner (24 bit)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS p partitioner mindre end 32Mb"
+msgid "Allow all users"
+msgstr "Tillad alle brugere"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS p partitioner mindre end 16Mb"
+msgid "The official MandrakeSoft Store"
+msgstr "Den officielle MandrakeSoft-butik"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "苙drer st鴕relsen"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabelforbindelse"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Bruger"
#: ../../fsedit.pm:1
#, c-format
@@ -991,1288 +1911,252 @@ msgstr ""
"\n"
"Er du indforst錯t med at 鴇el鎔ge alle partitionerne?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Fejl"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Lav ny sikkerhedskopi f鴕 genskabning (kun for inkrementalbackupper)."
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "Printer p parallel port \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "med /usr"
+msgid "Name"
+msgstr "Navn"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simpel"
+msgid "mkraid failed"
+msgstr "mkraid fejlede"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Formaterer swap-partition %s"
+msgid "Button 3 Emulation"
+msgstr "Emulering af knap 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
+msgid "Sending files..."
+msgstr "Sender filer..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montering af partition %s i katalog %s mislykkedes"
+msgid "Israeli (Phonetic)"
+msgstr "Israelsk (Fonetisk)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Monterer partition %s"
+msgid "access to rpm tools"
+msgstr "adgang til rpm-v鎟kt鴍er"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Tjekker %s"
+msgid "edit"
+msgstr "redig閞"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Du skal v鎙ge eller indtaste en printer/enhed!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
+msgid "Permission problem accessing CD."
+msgstr "Problem med rettigheder ved adgang til CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
+msgid "Phone number"
+msgstr "Telefonnummer"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Drivprogrammet %s for lydkortet er ikke listet"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik p 'N鎠te ->' hvis du 鴑sker at slette alle data og partitioner der "
-"ligger p dette diskdrev. V鎟 omhyggelig, efter klik p 'N鎠te ->' vil du "
-"ikke v鎟e i stand til at redde nogen data eller partitioner, der ligger p "
-"dette diskdrev, inklusive alle Windows data.\n"
-"Klik p '<- Forrige' for at stoppe denne handling uden at tabe nogen data og "
-"partitioner der er tilstede p dette diskdrev."
+msgid "Printer name, description, location"
+msgstr "Printernavn, beskrivelse, sted"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"V鎙g det diskdrev som du vil slette for at installere din nye Mandrake Linux "
-"partition. V鎟 forsigtig, alle data som er p der, vil g tabt og vil ikke "
-"kunne genskabes!"
+msgid "USA (broadcast)"
+msgstr "USA (broadcast)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Som en opsummering vil DrakX give dig en oversigt over forskellig "
-"information\n"
-"som den har om dit system. Afh鎛gig af installeret maskinel kan du have\n"
-"et eller flere af de f鴏gende punkter. Hvert punkt best錼 af en overskrift\n"
-"fulgt af en kort opsummering af den nuv鎟ende konfiguration. Klik p錦n"
-"den tilsvarende \"Konfigur閞\" knap for at 鎛dre p ops鎡ningen.\n"
-"\n"
-" * \"Tastatur\": Tjek at din tastaturops鎡ning er korrekt og 鎛dr om "
-"n鴇vendigt.\n"
-"\n"
-" * \"Land\": Tjek at du har valgt korrekt land. Hvis du ikke er i dette "
-"land,\n"
-"s klik p \"Konfigur閞\"-knappen og v鎙g et andet land. Hvis dit land dit "
-"ikke er i\n"
-"listen, s klik p \"Mere\"-knappen for at f en fuldst鎛dig liste.\n"
-"\n"
-" ' \"Tidszone\": DrakX bestemmer din tidszone ud fra hvilket land du har "
-"valgt.\n"
-"Du kan klikke p \"Konfigur閞\" her, hvis dette ikke er korrekt.\n"
-"\n"
-" * \"Mus\" :Tjek museops鎡ningen og klik p knappen for at 鎛dre om "
-"n鴇vendigt.\n"
-"\n"
-" * \"Printer\": Ved at klikke p \"Konfigur閞\"-knappen 錬nes "
-"printerops鎡nings-\n"
-"hj鎙peren. Konsult閞 det tilh鴕ende kapitel i opstartsguiden for mere\n"
-"information om hvordan en printer kan s鎡tes op. Gr鎛sefladen som er vist\n"
-"d閞 ligner det som benyttes under installationen.\n"
-"\n"
-" * 'Lydkort': Hvis et lydkort er blevet fundet p dit system, vil det blive "
-"vist h閞. Hvis du bem鎟ker at det viste lydkort ikke er det som faktisk er "
-"til stede p systemet, kan du klikke p knappen og v鎙ge en anden driver.\n"
-" * \"Grafisk gr鎛seflade\": DrakX vil ops鎡te din grafiske gr鎛seflade i "
-"opl鴖ning\n"
-"800x600 eller 1024x768. Hvis det ikke passer til dine behov, s klik p "
-"\"Konfigur閞\"-\n"
-"knappen for at 鎛dre p ops鎡ningen.\n"
-"\n"
-" * \"TV-kort\": Hvis et TV-kort er fundet i din maskine, er det vist her. "
-"Hvis du har\n"
-"et TV-kort som ikke er fundet, s klik \"Konfigur閞\" for at s鎡te det op "
-"manuelt.\n"
-"\n"
-" * \"ISDN-kort\": Hvis der er fundet et ISDN-kort, vil det vises her. Du kan "
-"klikke p錦n"
-"\"Konfigur閞\" for at 鎛dre p parameterne til kortet.\n"
-"\n"
-" * \"Netv鎟k\": V鎙g dette for at 鎛dre p internetforbindelsen eller den "
-"lokale\n"
-"netv鎟ksops鎡ning.\n"
-"\n"
-" * \"Sikkerhedsniveau\": Du kan her 鎛dre p sikkerhedsniveauet som er "
-"defineret tidligere.\n"
-"\n"
-" * \"Brandmur\": Hvis du skal koble din maskine direkte til internet, er det "
-"en god id閈n"
-"at beskytte sig mod angreb med en brandmur. Opstartsguiden har mere om\n"
-"dette.\n"
-"\n"
-" * \"Opstartsindl鎠er\": Hvis du vil 鎛dre p konfigurationen for "
-"opstartsindl鎠eren,\n"
-"s klik p denne knap. Dette b鴕 forbeholdes avancerede brugere.\n"
-"\n"
-" * \"Tjenester\": Her kan du bestemme hvilke tjenester som skal startes p "
-"din\n"
-"maskine. Hvis du skal bruge maskinen som server er det en god id at "
-"kontrollere dette."
+"V鎙g mediet for\n"
+"sikkerhedskopiering."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"'Lydkort': Hvis et lydkort er blevet fundet p dit system, vil det blive "
-"vist her. Hvis du bem鎟ker at det viste lydkort ikke er det som faktisk er "
-"til stede p systemet, kan du klikke p knappen og v鎙ge en anden driver."
+msgid "Use Xinerama extension"
+msgstr "Brug Xinerama-udvidelse"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en systemopstarter til NewWorld MacIntosh-maskinel. Den kan starte "
-"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p din maskine. "
-"S鎑vanligvis vil disse andre styresystemer blive korrekt opdaget og "
-"installeret. Hvis dette ikke skulle v鎟e tilf鎙det kan du her tilf鴍e en "
-"indgang i h錸den. V鎟 omhyggelig med at v鎙ge de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-" * Init-besked: En enkel tekstbesked som vises f鴕 valg af opstart.\n"
-"\n"
-" * Opstartsenhed: Angiver hvor du 鴑sker at placere informationen som er "
-"n鴇vendig for at starte GNU/Linux. Du vil generelt have indstillet en "
-"bootstrap-partition tidligere til at have denne information.\n"
-"\n"
-" * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
-"mulige med yaboot. Den f鴕ste forsinkelse bliver m錶t i sekunder og du kan "
-"ved det punkt v鎙ge mellem CD, OF-opstart, MacOS eller Linux.\n"
-"\n"
-" * Ventetid f鴕 kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
-"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder f鴕 din "
-"forvalgte kernebeskrivelse bliver valgt.\n"
-"\n"
-" * Aktiv閞 CD-opstart?: Hvis du v鎙ger dette valg vil du kunne trykke 'C' "
-"for CD ved det f鴕ste opstartsvalg.\n"
-"\n"
-" * Aktiver OF-opstart?: Hvis du v鎙ger dette valg vil du kunne trykke 'N' "
-"for 'Open Firmware' ved det f鴕ste opstartsvalg.\n"
-"\n"
-" * Forvalgt styresystem: Du kan v鎙ge hvilket forvalgt styresystem der skal "
-"startes n錼 Open Firmwareforsinkelsen er udl鴅et."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Du kan tilf鴍e flere valgmuligheder i Yaboot, til andre styresystemer, andre "
-"kerner, eller til n鴇-opstart.\n"
-"\n"
-"For andre styresystemer best錼 indgangen blot af et navn og rodpartitionen\n"
-"\n"
-"Der er for Linux nogen f valgmuligheder:\n"
-"\n"
-" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
-"fra Yaboot for at v鎙ge denne opstartsmulighed.\n"
-"\n"
-" * Image: Dette vil v鎟e navnet p den kerne der skal opstartes. Typisk "
-"vmlinux eller en variation p vmlinux med en endelse.\n"
-"\n"
-" * Root: root enheden eller \"/\" for din Linux installation.\n"
-"\n"
-" * Append: p Apple udstyr bruges kerne-append muligheden ofte til at hj鎙pe "
-"med initialisering af billedudstyr, eller til at aktivere emulering af "
-"museknapper for de manglende knap-2 og knap-3 p musen p en typisk Apple "
-"mus. Det f鴏gende er nogle eksempler:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: denne mulighed kan bruges enten til at indl鎠e de f鴕ste moduler, "
-"f鴕 opstartsenheden er tilg鎛gelig, eller til at indl鎠e en ramdisk ved "
-"opstart i en n鴇situation.\n"
-"\n"
-" * Initrd-size: den almindelige st鴕relse p en ramdisk er generelt 4.096 "
-"kbyte. Hvis du har brug for at udl鎔ge en stor ramdisk kan denne mulighed "
-"bruges til at angive en ramdisk st鴕re end standarden.\n"
-"\n"
-" * Read-write: normalt bliver rod-partitionen f鴕st monteret skrivebeskyttet "
-"for at muligg鴕e et filsystemstjek f鴕 systemet g錼 i luften. Du kan "
-"tilsides鎡te denne standard med denne valgmulighed.\n"
-"\n"
-" * NoVideo: skulle Apple-billedudstyret vise sig at v鎟e specielt "
-"problemfyldt kan du v鎙ge denne mulighed for at starte op i 'novideo'-"
-"tilstand, med indbygget rammebufferunderst鴗telse.\n"
-"\n"
-" * Default: v鎙ger denne indgang som v鎟ende det normale Linux valg, som "
-"v鎙ges ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil ogs "
-"blive fremh鎣et med en '*', hvis du trykker Tab for at se opstartsvalgene."
+"Kan ikke lukke mkbootdisk ordentligt: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX vil f鴕st finde alle IDE-enheder der er tilstede p din maskine. Den "
-"vil ogs lede efter en eller flere PCI SCSI-kort p dit system. Hvis et SCSI-"
-"kort findes, vil DrakX automatisk installere en driver til det.\n"
-"\n"
-"Da maskinelefters鴊ningen ikke er idiotsikker, kan DrakX fejle i at finde "
-"dine diskdrev. I s fald m du angive dit maskinel manuelt.\n"
-"\n"
-"Hvis du m錿te angive dit PCI SCSI-kort manuelt, vil DrakX sp鴕ge om du vil "
-"specificere nogle indstillingsmuligheder for den. Du b鴕 lade DrakX sp鴕ge "
-"udstyret om ops鎡ning af kortspecifikke indstillinger, som er n鴇vendige for "
-"at initialisere kortet. De fleste gange vil DrakX finde ud af dette uden "
-"problemer.\n"
-"\n"
-"Hvis DrakX ikke kan f oplysninger om indstillinger ud af udstyret, som skal "
-"bruges til ops鎡ningen, skal du angive ops鎡ningsinformation til driveren. "
+msgid "West Europe"
+msgstr "Vesteuropa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Nu er det tid til at v鎙ge et udskrivningssystem for din maskine. Andre "
-"styresystemer tilbyder m錽ke 閠, men Mandrake tilbyder to.\n"
-"\n"
-"Printersystemerne er hver is鎟 bedst til en bestemt konfigurationstype.\n"
-"\n"
-" * 'pdq' - som betyder 'print, don't queue' (udskriv, k ej), er valget, "
-"hvis du har en direkte forbindelse til din printer, og du 鴑sker at kunne "
-"klare printproblemer med det samme, og du ikke har nogen printere via "
-"netv鎟k. ('pdq' vil kun behandle meget simple netv鎟kstilf鎙de, og er lidt "
-"sl鴙t p netv鎟k.) V鎙g 'pdq' hvis dette er din f鴕ste erfaring med GNU/"
-"Linux.\n"
-"\n"
-" * 'CUPS' - 'Common Unix Printing System' (F鎙les printersystem for Unix) er "
-"fremragende til at udskrive p din lokale printer, og ogs p den, der st錼 "
-"p den anden side af jordkloden. Det er nemt at konfigurere, og kan virke "
-"som en server eller klient for det bedagede 'lpd'-printsystem, s det er "
-"kompatibelt med de tidligere systemer, som stadig kan have brug for "
-"udskriftstjenester. Det er ganske st鎟kt, men den basale ops鎡ning er n鎠ten "
-"lige s nem som for 'pdq'. Hvis du har brug for at dette efterligner en "
-"'lpd'-server, skal du aktivere 'cups-lpd'-d鎚onen. CUPS har grafiske "
-"gr鎛seflader for udskrivning og valg af printermuligheder, og for "
-"administration af printeren.\n"
+"[VALGMULIGHEDER] [PROGRAM-NAVN]\n"
"\n"
-"Du kan 鎛dre dit valg senere ved at k鴕e PrinterDrake fra Mandrakes "
-"Kontrolcenter, og klikke p ekspert-knappen."
+"VALGMULIGHEDER:\n"
+" --help - udskriv denne hj鎙pebesked.\n"
+" --report - program b鎟 v鎟e 閚 af Mandrakes v鎟kt鴍er\n"
+" --incident - program b鎟 v鎟e 閚 af Mandrakes v鎟kt鴍er"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO og grub er opstartsindl鎠ere for GNU/Linux. Normalt er dette trin\n"
-"helt automatisk. DrakX vil analysere opstartssektoren p disken og\n"
-"handle ud fra det som findes der.\n"
-"\n"
-" * Hvis en opstartssektor for Windows bliver fundet, vil den erstatte denne "
-"med\n"
-"en grub- eller LILO-opstartsektor. P denne m錮e kan du indl鎠e enten\n"
-"GNU/Linux eller et andet operativsystem.\n"
-"\n"
-" * Hvis en opstartsektor for grub eller LILO bliver fundet, vil den blive "
-"erstattet\n"
-"med en ny.\n"
-"\n"
-"Hvis det ikke er mulig at afg鴕e dette automatisk, vil DrakX sp鴕ge dig "
-"hvor\n"
-"opstartsindl鎠eren skal installeres.\n"
-"\n"
-"\"Opstartsenhed\": I de fleste tilf鎙de vil du ikke 鴑ske at 鎛dre p錦n"
-"standardvalget (\"F鴕ste sektor af harddisk (MBR)\"), men hvis du "
-"foretr鎘ker\n"
-"det, kan opstartsindl鎠eren installeres p en anden disk, eller til og med\n"
-"p en diskette (\"P diskette\"). "
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 version %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Efter du har konfigureret de generelle parametre for opstartsindl鎠eren, vil "
-"listen med opstartsmuligheder, som vil v鎟e tilg鎛geligt ved opstarten, "
-"blive vist.\n"
-"\n"
-"Hvis der er andre operativsystemer installeret p din maskine, vil de "
-"automatisk blive tilf鴍et til opstartsmenuen. Du kan finjustere de "
-"eksisterende muligheder ved at klikke 'Tilf鴍' for at oprette en ny indgang; "
-"v鎙g en indgang og klik p '苙dr' eller 'Fjern' for at 鎛dre eller fjerne "
-"den. 'O.k.' bekr鎓ter dine 鎛dringer.\n"
-"\n"
-"M錽ke vil du ikke 鴑ske at givea dgang til disse andre operativsystemer til "
-"nogensomhelst, som har adgang til konsollen og genstarter maskinen. Du kan "
-"slette de tilsvarende indgange til operativsystemerne for at fjerne dem fra "
-"opstartsindl鎠erens menu, men du vil s have brug for en opstartsdiskette "
-"for at kunne starte disse andre operativsystemer op!"
+msgid "Copying %s"
+msgstr "Kopierer %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Denne dialog giver dig mulighed for at finindstille din opstartsindl鎠er:\n"
-"\n"
-" * 'Opstartsindl鎠er der bruges': der er tre muligheder for din "
-"opstartsindl鎠er:\n"
-"\n"
-" * 'GRUB': hvis du foretr鎘ker GRUB (tekstmenu).\n"
-"\n"
-" * 'LILO med tekstmenu': hvis du foretr鎘ker LILO med tekstgr鎛seflade.\n"
-"\n"
-" * 'LILO med grafisk menu': hvis du foretr鎘ker LILO med "
-"grafikgr鎛seflade.\n"
-"\n"
-" * 'Opstartsenhed': I de fleste tilf鎙de vil det ikke v鎟e n鴇vendigt at "
-"鎛dre standard (/dev/hda), men hvis du foretr鎘ker det, kan "
-"opstartsindl鎠eren installeres p det andet diskdrev (/dev/hdb), eller endda "
-"p en diskette (/dev/fd0).\n"
-"\n"
-" * 'Forsinkelse f鴕 opstart af standardsystem': Efter opstart eller genstart "
-"af maskinen er dette den tid der gives til brugeren p konsollen til at "
-"v鎙ge en anden opstartsindgang end den forvalgte.\n"
-"\n"
-"V鎟 opm鎟ksom p at hvis du v鎙ger ikke at installere en opstartsindl鎠er "
-"(ved at v鎙ge 'Overspring'), skal du v鎟e sikker p at du har en anden m錮e "
-"at starte dit Mandrake Linux-system op p! V鎟 sikker p hvad du g鴕 hvis du "
-"鎛drer nogen af tilvalgene her!\n"
-"\n"
-"Et klik p 'Avanceret'-knappen i denne dialog vil tilbyde avancerede "
-"muligheder beregnet til ekspertbrugeren."
+msgid "Choose color"
+msgstr "v鎙g farve"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
-"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
-"og er den eneste der har lov til at lave opdateringer, tilf鴍e brugere, "
-"鎛dre i den overordnede systemkonfiguration og s videre. Kort sagt, root "
-"kan g鴕e alt! Derfor skal du v鎙ge en adgangskode der er sv鎟 at g鎡te - "
-"DrakX vil fort鎙le dig hvis adgangskoden du valgte er for nem. Som v韘t er "
-"du ikke tvunget til at indtaste en adgangskode, men vi advarer dig p det "
-"kraftigste mod dette. GNU/Linux er lige s udsat for behandlingsfejl som "
-"andre operativsystemer. Da root kan overvinde alle forhindringer og "
-"uforvarende slette alle data p partitioner ved sorgl鴖t at behandle "
-"partitionerne selv, er det vigtigt at det er vanskeligt at blive root.\n"
-"\n"
-"Adgangskoden b鴕 v鎟e en blanding af bogstaver og tal og mindst 8 tegn "
-"langt. Skriv aldrig en adgangskode ned for root - det g鴕 det for nemt at "
-"bryde ind i et system.\n"
-"\n"
-"G鴕 dog ikke adgangskoden for lang eller kompliceret da du skal v鎟e i stand "
-"til at huske den uden for stort besv鎟!\n"
-"\n"
-"Adgangskoden vil ikke blive vist p sk鎟men n錼 du indtaster den. Du skal "
-"derfor indtaste adgangskoden to gange, for at begr鎛se risikoen for "
-"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
-"denne 'ukorrekte' adgangskode v鎟e kr鎣et den f鴕ste gang du forbinder dig "
-"til systemet.\n"
-"\n"
-"Hvis du 鴑sker at adgang til denne maskine skal v鎟e styret af en "
-"autenticerings-server, s klik p Avanceret-knappen.\n"
-"\n"
-"Hvis dit netv鎟k bruger LDAP, NIS eller PDC Windows dom鎛e-"
-"autentificeringstjenester, v鎙g da den rigtige som 'autentificering'. Hvis "
-"du ikke v閐 hvilken der skal bruges, s sp鴕g din systemadministrator.\n"
-"\n"
-"Hvis du har problemer med at huske adgangskoder, s kan du v鎙ge 'Ingen "
-"adgangskoder' hvis din maskine ikke vil v鎟e forbundet til Internettet, og "
-"du stoler p alle som kan f adgang til maskinen. "
+msgid "Dominican Republic"
+msgstr "Dominikanske Republik"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"V鎙g den rigtige port. For eksempel er navnet for COM1-porten under MS "
-"Windows 'ttyS0' under GNU/Linux."
+msgid "Swaziland"
+msgstr "Swaziland"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Normalt har DrakX ingen problemer med at finde ud af hvor mange knapper du "
-"har p din mus. Den antager at du har en to-knapsmus og vil lave en "
-"ops鎡ning hvor den tredje knap emuleres. Den tredje knap for en to-knaps mus "
-"emuleres ved at trykke p den venstre og h鴍re museknap samtidigt. DrakX vil "
-"automatisk vide om din mus bruger et PS/2 eller et USB-gr鎛sesnit.\n"
-"\n"
-"Hvis du 鴑sker en anden type mus, v鎙g da den rigtige type mus fra den viste "
-"liste.\n"
-"\n"
-"Hvis du v鎙ger en mus forskellig fra den forvalgte, vil du blive pr鎠enteret "
-"for en sk鎟m for museafpr鴙ning. Brug knapperne og hjulet for at efterpr鴙e, "
-"om indstillerne er korrekte, og at musen virker korrekt. Hvis musen ikke "
-"virker korrekt, tryk da p mellemrumstangenten eller vognretur for at "
-"annullere testen og g tilbage til listen med valg.\n"
-"\n"
-"Mus med hjul findes til tider ikke automatisk., s du vil beh鴙e at v鎙ge "
-"din mus fra en liste. Forsikr dig om at du v鎙ger den der passer til porten "
-"som din mus er tilsluttet. Efter valg af en mus og tryknin p 'N鎠te ->'-"
-"knappen vises et billede med en mus p sk鎟men. Rul med musehjulet for at "
-"forsikre dig om at det aktiveres korrekt. N錼 du har set at musehjulet p "
-"sk鎟men bev鎔er sig som du ruller med musehjulet, s afpr鴙 museknapperne og "
-"tjek at musemark鴕en flytter sig n錼 du flytter p musen."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Dit valg af foretrukkent sprog vil p鍁irke sproget for dokumentationen, "
-"installeringen og systemet generelt. V鎙g f鴕st den verdensdel du befinder "
-"dig i, og s det sprog, du taler.\n"
-"\n"
-"Hvis du klikker p Avanceret-knappen kan du v鎙ge andre sprog, der "
-"installeres p maskinen, og derved installeres de sprogspecifikke filer for "
-"systemdokumentation og programmer. Hvis du for eksempel bev鎟ter folk fra "
-"Spanien p din maskine, v鎙g da engelsk som standardsproget i tr-visningen, "
-"og 'Espa駉l' i den avancerede afdeling.\n"
-"\n"
-"Bem鎟k at du ikke er begr鎛set til at v鎙ge et enkelt yderligere sprog. Du "
-"kan v鎙ge flere sprog, eller endog installere dem alle ved at markere 'Alle "
-"sprog'-boksen. Valg af underst鴗telse for et sprog betyder at overs鎡telser, "
-"skrifttyper, stavekontrol mv for dette sprog bliver installeret. Ydermere "
-"vil 'Brug ISO 10646 som standard'-boksen g鴕e at systemet tvinges til at "
-"bruge ISO 10646 (UTF-8). Bem鎟k dog at dette er en eksperimentel facilitet. "
-"Hvis du v鎙ger forskellige sprog der kr鎣er forskellige kodninger, vil ISO "
-"10646-underst鴗telse blive installeret under alle omst鎛digheder.\n"
-"\n"
-"For at skifte mellem de forskellige sprog installeret p systemet kan du "
-"starte programmet '/usr/sbin/localedrake' som 'root' for at 鎛dre det sprog "
-"der bruges af hele systemet. K鴕sel af dette program som almindelig bruger "
-"vil kun 鎛dre sprogindstillingerne for denne bruger."
+msgid "Please check if you are using CDRW media"
+msgstr "Mark閞 om du bruger et CDRW-medie"
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Afh鎛gigt af det foretrukne sprog du har valgt vil DrakX automatisk v鎙ge en "
-"bestemt type tastatur. Men du har m錽ke ikke et tastatur som svarer "
-"n鴍agtigt til dit sprog: for eksempel hvis du er en engelsktalende svejtser, "
-"vil du m錽ke stadig 鴑ske at dit tastatur skal v鎟e et svejtsisk tastatur. "
-"Eller hvis du taler engelsk men bor i Qu閎ec, er du m錽ke i samme "
-"situation, hvor dit modersm錶 og tastatur ikke passer sammen. I begge "
-"tilf鎙de giver dette installationstrin mulighed for at v鎙ge et passende "
-"tastatur fra listen.\n"
-"\n"
-"Klik p 'mere'-tasten for at blive pr鎠enteret for den fulde \n"
-"liste af underst鴗tede tastaturer.\n"
-"\n"
-"Hvis du v鎙ger en tastaturudl鎔ning baseret p et ikke-latinsk alfabet, vil "
-"den n鎠te dialog give dig mulighed for at v鎙ge den tastekombination, der "
-"vil skifte mellem den latinske og den ikke-latinske udl鎔ning."
+"V鎙g det diskdrev som du vil slette for at installere din nye Mandrake Linux "
+"partition. V鎟 forsigtig, alle data som er p denne partition vil g tabt og "
+"vil ikke kunne genskabes!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Dette trin bliver kun aktiveret hvis der bliver fundet en eksisterende\n"
-"GNU/Linux partition p din maskine.\n"
-"\n"
-"DrakX skal vide om du vil udf鴕e en ny installation eller en opgradering\n"
-"af et eksisterende Mandrake Linux-system.\n"
-"\n"
-" * \"Install閞\": Dette vil stort s閠 slette hele det gamle system. Hvis du\n"
-"鴑sker at 鎛dre hvordan diskene bliver partitioneret, eller 鎛dre p錦n"
-"filsystemene, b鴕 du v鎙ge dette. Afh鎛gigt af hvordan du partitionerer kan\n"
-"nogen af de gamle data eventuelt beholdes. \n"
-"\n"
-" * \"Opgrad閞\": Denne installationsklasse lader dig opgradere pakkene som\n"
-"er installeret p dit nuv鎟ende Mandrake Linux-system. Dine nuv鎟ende\n"
-"partitioner og brugerdata bliver ikke ber鴕t. De fleste andre "
-"konfigurationstrin\n"
-"forbliver tilg鎛gelige, i lighed med en standardinstallation.\n"
-"\n"
-"\"Opgrad閞\"-valget b鴕 fungere p Mandrake Linux-systemer som k鴕er\n"
-"version 8.1 eller nyere. Opgradering af versioner tidligere end 8.1 er ikke\n"
-"anbefalet. "
+msgid " on parallel port \\#%s"
+msgstr " p parallelport \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"'Land': Tjek det aktuelle valg af land. Hvis du ikke er i dette land, s "
-"klik p 'Konfigur閞'-knappen og v鎙g et andet. Hvis dit land ikke er p den "
-"f鴕ste liste der vistes, s klik p 'Mere'-knappen for at f den komplette "
-"liste over lande."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Brug tasterne %c og %c til at v鎙ge mellem mulighederne."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end 閚 Microsoft Windows partition er blevet genkendt p dit diskdrev. "
-"V鎙g den som du 鴑sker at 鎛dre st鴕relse p for at kunne installere dit nye "
-"Mandrake Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som f鴏ger: 'Linux navn', 'Windows navn', "
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som f鴏ger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-" * 'a' betyder 'hoved-drev p den prim鎟e IDE controller',\n"
-"\n"
-" * 'b' betyder 'slave-drev p den prim鎟e IDE controller',\n"
-"\n"
-" * 'c' betyder 'hoved-drev p den s鎘und鎟e IDE controller',\n"
-"\n"
-" * 'd' betyder 'slave-drev p den s鎘und鎟e IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'f鴕ste drev', 'b' betyder det 'andet drev', "
-"osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den f鴕ste\n"
-"disk eller partition kaldes 'C:')."
+msgid "Generic 2 Button Mouse"
+msgstr "Standard 2-knaps mus"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du v鎙ge hvor Mandrake Linux skal installeres. Hvis partitionerne "
-"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
-"fra et andet partitioneringsv鎟kt鴍), kan du bruge dem. Ellers skal disk-"
-"partitionerne laves f鴕st.\n"
-"\n"
-"For at lave partitioner skal du f鴕st v鎙ge en harddisk. Du kan v鎙ge disken "
-"der skal partitioneres ved at trykke p \"hda\" for den f鴕ste IDE disk, "
-"\"hdb\" for den anden eller \"sda\" for den f鴕ste SCSI disk og s videre.\n"
-"\n"
-"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
-"\n"
-" * 'Slet alt': Dette valg sletter alle partitioner p den valgte disk.\n"
-"\n"
-" * 'Allok閞 automatisk': dette valg tillader dig automatisk at lave Ext3 og "
-"swappartitioner p den fri plads p din disk.\n"
-"\n"
-"* 'Mere': giver adgang til flere faciliteter:\n"
-"\n"
-" * 'Gem partitionstabel': Gemmer din partitionstabel p en diskette. "
-"Nyttigt ved senere redning af partitionstabellen, om n鴇vendigt. Det "
-"anbefales meget at du bruger dette trin.\n"
-"\n"
-" * 'Genskab partitionstabel': lader dig genskabe en tidligere gemt "
-"partitionstabel fra diskette.\n"
-"\n"
-" * 'Red partitionstabel': hvis din partitionstabel er beskadiget, kan du "
-"pr鴙e at redde den med denne mulighed. V鎟 forsigtig og husk at det ikke "
-"altid virker.\n"
-" * 'Genindl鎠 partitionstabel': forkaster alle 鎛dringer og genindl鎠er "
-"partitionstabellen som oprindeligt l p disken\n"
-"\n"
-" * 'Automatisk montering af flytbart medie': fravalg af denne mulighed "
-"vil tvinge brugere til at manuelt montere og afmontere media s錽om disketter "
-"og cdrommer\n"
-"\n"
-" * 'Vejleder': Hvis du 鴑sker at bruge vejlederen til at partitionere din "
-"disk, kan du bruge denne mulighed. Dette anbefales, hvis du ikke har den "
-"store forst錯lse om partitionering\n"
-"\n"
-" * 'Fortryd': Du kan bruge denne mulighed for at annullere dine 鎛dringer\n"
-"\n"
-" * 'Skift mellem normal og ekspert-version': giver mulighed for flere "
-"handlinger med partitioner (type, valgmuligheder, format) og giver mere "
-"information om diskdrevet\n"
-"\n"
-" * 'F鎟dig': n錼 du er f鎟dig med partitionering af din disk, dette vil "
-"skrive 鎛dringerne tilbage p disken.\n"
-"\n"
-"Ved definering af en partitionsst鴕relse kan du finjustere denne ved at "
-"bruge piletasterne p tastaturet.\n"
-"\n"
-"Bem鎟k: du kan n enhver valgmulighed ved brug af tastaturet: navig閞 gennem "
-"partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"N錼 en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (N錼 en tom partition er valgt)\n"
-"\n"
-" * Ctrl-d for at slette en partition\n"
-"\n"
-" * Ctrl-m for at s鎡te et monteringssti\n"
-"\n"
-"For at f information om de forskellige tilg鎛gelige filsystemstyper kan du "
-"l鎠e kapitlet ext2fs i 'Referencemanualen'.\n"
-"\n"
-"Hvis du er i gang med at installere p en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition p mindst 1MB til Yaboot-systemstarteren. Hvis du "
-"v鎙ger at lave partitionen en smule st鴕re, f.eks. 50MB kan den v鎟e nyttig "
-"til at gemme en ekstra kerne og ramdisk-billede for n鴇situationer ved "
-"opstart."
+msgid "Remove the logical volumes first\n"
+msgstr "Fjern de logiske delarkiver f鴕st\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu vil DrakX give dig mulighed for at v鎙ge det 鴑skede sikkerhedsniveau for "
-"maskinen. Hovedreglen er at sikkerhedsniveauet b鴕 s鎡tes h鴍ere, hvis "
-"maskinen skal indeholde vigtige data, eller hvis makinen vil v鎟e direkte "
-"offentligt p Internettet. Men et h鴍ere sikkerhedsniveau vindes normalt p "
-"bekostning af letheden af anvendelsen.\n"
-"\n"
-"Hvis du ikke v閐 hvad du skal v鎙ge, s behold den foresl錯de mulighed."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Den fremh鎣ede mulighed vil blive startet automatisk om %d sekunder."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"P det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
-"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. Fejl "
-"er m錽ke blevet rettet, og sikkerhedsproblemer m錽ke l鴖t. Det er nu muligt "
-"for dig at hente disse ned fra internettet for at disse opdateringer kan "
-"komme dig til gode. V鎙g 'Ja' hvis du har en fungerende internet- "
-"forbindelse eller 'Nej' hvis du foretr鎘ker at installere opdaterede pakker "
-"senere.\n"
-"\n"
-"Valg af 'Ja' viser en liste af steder hvorfra opdateringer kan hentes. V鎙g "
-"en der er n鎟 ved dig. S vil et tr med pakkevalg fremkomme: gennemse "
-"valget og tryk 'Install閞' for at modtage og installere den valgte pakke "
-"eller 'Annull閞'for at afbryde."
+"Kan ikke skrive /etc/sysconfig/bootsplash\n"
+"Fil ikke fundet."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internetadgang"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Enhver partition der netop er blevet defineret, skal formateres til brug "
-"(formatering betyder oprettelse af et filsystem).\n"
-"\n"
-"Nu kan du ogs 鴑ske at omformatere nogle allerede eksisterende partitioner "
-"for at slette de data som de indeholder. Hvis du 鴑sker dette, s mark閞 "
-"ogs de partitioner som du 鴑sker at formatere.\n"
-"\n"
-"Bem鎟k at det ikke er n鴇vendigt at omformatere alle allerede eksisterende "
-"partitioner. Det er n鴇vendigt at omformatere de partitioner, der indeholder "
-"operativsystemet (s錽om '/', '/usr' og '/var', men du er ikke n鴇t til at "
-"omformatere partitioner som du 鴑sker at beholde (typisk /home).\n"
-"\n"
-"V鎟 forsigtig med valg af partitioner; efter formatering vil alle data v鎟e "
-"slettede p de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
-"af det.\n"
-"\n"
-"Klik p 'N鎠te ->' n錼 du er klar til at formatere partitioner.\n"
-"\n"
-"Klik p '<- Forrige' hvis du 鴑sker at v鎙ge andre partitioner til at "
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Klik p 'Avanceret' for at v鎙ge partitioner som du 鴑sker at tjekke for "
-"d錼lige blokke."
+"y coordinate of text box\n"
+"in number of characters"
+msgstr "antal tegn i tekstrudens y-led"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"V鎟sgo'. Installationen en nu f鎟dig og dit GNU/Linux-system er nu klar til "
-"brug. Klik bare 'N鎠te ->' for at genstarte systemet. Den f鴕ste ting, som "
-"du burde se, efter din maskine har lavet sine test af maskinel, er "
-"opstartsmenuen, som giver dig valg af det operativsystem der skal startes.\n"
-"\n"
-"'Avanceret'-knappen viser to ekstra knapper for at:\n"
-"\n"
-" * 'generere en auto-installeringsdiskette': for at oprette en "
-"installerings- diskette, som automatisk vil udf鴕e en hel installation uden "
-"hj鎙p fra en operat鴕, magen til den installation du lige har konfigureret.\n"
-"\n"
-" Bem鎟k at to forskellige muligheder er tilstede efter klik p knappen:\n"
-"\n"
-" * 'Genafspil': Dette er en delvist automatiseret installering. "
-"Partitioneringstrinnet er den eneste interaktive procedure.\n"
-"\n"
-" * 'Automatisk': Fuldautomatisk installering: harddisken bliver "
-"fuldst鎛dig genoverskrevet, alle data forsvinder.\n"
-"\n"
-" Denne facilitet er meget nyttig ved installering af et antal lignende "
-"maskiner. Se afsnittet om autoinstallering p vores websted for yderligere "
-"oplysninger.\n"
-"\n"
-" * 'Gem pakkevalg'(*): Gemmer en liste med pakkevalget. For at bruge dette "
-"pakkevalg i en anden installation kan disketten inds鎡tes i drevet og "
-"installeringen kan startes. Brug [F1]-tasten p opstartssk鎟men og indtast "
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
-"ved at skive \"mformat a:\")"
+"For at f en liste af tilg鎛gelige muligheder for den aktuelle printer kan "
+"du klikke p knappen 'Liste med printermuligheder'."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Aktiverer servere..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Udskriver testsider..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Der findes allerede en partition med monterings-sti %s\n"
#: ../../help.pm:1
#, c-format
@@ -2293,51 +2177,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Nu skal du v鎙ge hvor p din harddisk du vil installere dit Mandrake Linux-"
"operativsystem. Hvis disken er tom eller et eksisterende operativsystem "
@@ -2354,326 +2236,179 @@ msgstr ""
"\n"
"Afh鎛gig af din disks konfiguration er flere muligheder tilstede:\n"
"\n"
-" * 'Brug fri plads': Denne mulighed vil udf鴕e en automatisk opdeling af den "
-"ledige diskplads. Hvis du bruger denne mulighed vil du ikke blive spurgt om "
-"mere.\n"
-"\n"
-" * 'Brug eksisterende partition': vejlederen har fundet en eller flere "
-"eksisterende Linux-partitioner p din harddisk. Hvis du vil bruge dem, s "
-"v鎙g denne mulighed. Du vil s blive spurgt om monteringspunkter tilknyttet "
-"hver af partitionerne. De gamle monteringspunkter er forvalgt og i de fleste "
-"tilf鎙de er det en god id at beholde dem.\n"
-"\n"
-" * 'Brug den fri plads p Windows-partitionen': hvis Microsoft Windows er "
-"installeret p din disk og bruger al pladsen, bliver du n鴇t til at lave fri "
-"plads til Linux-data. For at g鴕e det kan du slette dine Microsoft Windows "
-"partitioner og data (se \"Slet hele disken\") eller 鎛dre st鴕relsen p din "
-"Microsoft Windows-FAT-partition. St鴕relses鎛dringen kan fortages uden tab "
-"af data, hvis du i forvejen har defragmenteret Windows-partitionen. Denne "
-"l鴖ning er anbefalet hvis du vil bruge b錮e Mandrake Linux og Microsoft "
-"Windows p samme maskine.\n"
+" * '%s': Denne mulighed vil udf鴕e en automatisk opdeling af den ledige "
+"diskplads. Hvis du bruger denne mulighed vil du ikke blive spurgt om mere.\n"
+"\n"
+" * '%s': vejlederen har fundet en eller flere eksisterende Linux-partitioner "
+"p din harddisk. Hvis du vil bruge dem, s v鎙g denne mulighed. Du vil s "
+"blive spurgt om monteringspunkter tilknyttet hver af partitionerne. De gamle "
+"monteringspunkter er forvalgt og i de fleste tilf鎙de er det en god id at "
+"beholde dem.\n"
+"\n"
+" * '%s': hvis Microsoft Windows er installeret p din disk og bruger al "
+"pladsen, bliver du n鴇t til at lave fri plads til Linux-data. For at g鴕e "
+"det kan du slette dine Microsoft Windows partitioner og data (se \"Slet hele "
+"disken\") eller 鎛dre st鴕relsen p din Microsoft Windows-FAT-partition. "
+"St鴕relses鎛dringen kan fortages uden tab af data, hvis du i forvejen har "
+"defragmenteret Windows-partitionen. Denne l鴖ning er anbefalet hvis du vil "
+"bruge b錮e Mandrake Linux og Microsoft Windows p samme maskine.\n"
"\n"
" F鴕 du v鎙ger denne l鴖ning, b鴕 du forst at st鴕relsen p din Microsoft "
"Windows partition vil blive mindre end da du startede. Du vil have mindre "
"fri plads under Microsoft Windows til at gemme dine data eller installere "
"nyt programmel.\n"
"\n"
-" * 'Slet hele disken': hvis du vil slette alle data p alle partitioner p "
-"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du v鎙ge "
-"denne mulighed. V鎟 forsigtig med denne l鴖ning, du vil ikke v鎟e i stand "
-"til at fortryde dine 鎛dringer efter at du har sagt ja.\n"
+" * '%s': hvis du vil slette alle data p alle partitioner p denne disk og "
+"erstatte dem med dit nye Mandrake Linux-system, kan du v鎙ge denne mulighed. "
+"V鎟 forsigtig med denne l鴖ning, du vil ikke v鎟e i stand til at fortryde "
+"dine 鎛dringer efter at du har sagt ja.\n"
"\n"
" !! Hvis du bruger denne mulighed vil alle eksisterende data p din disk "
"g tabt. !!\n"
"\n"
-" * 'Fjern Windows': dette vil simpelthen slette alt p disken og begynde fra "
-"en frisk, og partitionere fra ny. Alle data p din disk vil g tabt.\n"
+" * '%s': dette vil simpelthen slette alt p disken og begynde fra en frisk, "
+"og partitionere fra ny. Alle data p din disk vil g tabt.\n"
"\n"
" !! Hvis du bruger denne mulighed vil alle eksisterende data p din disk "
"g tabt. !!\n"
"\n"
-" * 'Tilret diskpartitioner': v鎙g denne mulighed hvis du vil partitionere "
-"disken i h錸den. V鎟 forsigtig - det er en st鎟k , men ogs farlig mulighed. "
-"og du kan meget nemt komme til at slette alle dine data. Derfor er denne "
-"mulighed kun anbefalet hvis du har lavet noget lignende f鴕. For at f viden "
-"om brugen af DiskDrake-programmet kan du se i afsnittet 'Administr閞 dine "
-"partitioner' i 'Startervejledningen'."
+" * '%s': v鎙g denne mulighed hvis du vil partitionere disken i h錸den. V鎟 "
+"forsigtig - det er en st鎟k , men ogs farlig mulighed. og du kan meget nemt "
+"komme til at slette alle dine data. Derfor er denne mulighed kun anbefalet "
+"hvis du har lavet noget lignende f鴕. For at f viden om brugen af DiskDrake-"
+"programmet kan du se i afsnittet 'Administr閞 dine partitioner' i "
+"'Startervejledningen'."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Til sidst vil du blive spurgt om du 鴑sker at se den grafiske gr鎛seflade "
-"ved opstart. Bem鎟k at du vil blive spurgt om dette selvom du har valgt ikke "
-"at afpr鴙e konfigurationen. Selvf鴏gelig vil du 鴑ske at svare Nej, hvis din "
-"maskine skal bruges som server, eller hvis ikke lykkedes dig at f sk鎟men "
-"konfigureret."
+msgid "Ukraine"
+msgstr "Ukraine"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"I tilf鎙de af at forskellige drivere er tilg鎛gelige til dit kort, med eller "
-"uden 3D-accelleration, bliver du foresl錯t at v鎙ge den server der bedst "
-"opfylder dine behov."
+msgid "Application:"
+msgstr "Applikation:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Opl鴖ning\n"
-"\n"
-" Du kan h閞 v鎙ge opl鴖ninger og farvedybder ud af de tilg鎛gelige "
-"muligheder for dit udstyr. V鎙g dem som bedst opfylder dine behov (du vil "
-"dog kunne 鎛dre dette efter installationen). Et eksempel p den valgte "
-"konfiguration vil blive vist p sk鎟men."
+msgid "External ISDN modem"
+msgstr "Eksternt ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Sk鎟m\n"
-"\n"
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"sk鎟men tilsluttet din maskine. Hvis dette ikke er tilf鎙det kan du i denne "
-"liste v鎙ge den sk鎟m du faktisk har."
+msgid "if set to yes, report check result by mail."
+msgstr "hvis sat til ja, s rapport閞 kontrolresultat per epost."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Dit valg? (standard %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Probleml鴖ning"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / Region"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (for X Window System) er hjertet af GNU/Linux' grafiske gr鎛seflade som "
-"alle de grafiske milj鴈r (KDE, GNOME, AfterStep, WindowMaker, mv.) der "
-"kommer sammen med Mandrake Linux afh鎛ger af.\n"
-"\n"
-"Du vil blive vist en liste med forskellige parametre der kan 鎛dres for at "
-"f den bedst mulige grafiske fremvisning:\n"
-"\n"
-"Grafikkort\n"
-"\n"
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"grafikkortet installeret p din maskine. Hvis dette ikke er tilf鎙det kan du "
-"i denne liste v鎙ge det kort du faktisk har.\n"
-" I tilf鎙de af at forskellige drivere er tilg鎛gelige til dit kort, med "
-"eller uden 3D-accelleration, bliver du foresl錯t at v鎙ge den server der "
-"bedst opfylder dine behov.\n"
-"\n"
-"\n"
-"Sk鎟m\n"
-"\n"
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"sk鎟men tilsluttet din maskine. Hvis dette ikke er tilf鎙det kan du i denne "
-"liste v鎙ge den sk鎟m du faktisk har.\n"
-"\n"
-"\n"
-"Opl鴖ning\n"
-"\n"
-" Du kan h閞 v鎙ge opl鴖ninger og farvedybder ud af de tilg鎛gelige "
-"muligheder for dit udstyr. V鎙g dem som bedst opfylder dine behov (du vil "
-"dog kunne 鎛dre dette efter installationen). Et eksempel p den valgte "
-"konfiguration vil blive vist p sk鎟men.\n"
-"\n"
-"\n"
-"Test\n"
+"Den klassiske metode for at fejls鴊e lydops鎡ningten er at k鴕e f鴏gende\n"
+"kommandoer:\n"
"\n"
-" Systemet vil pr鴙e at 錬ne en grafisk sk鎟m i den 鴑skede opl鴖ning. Hvis "
-"du kan se beskeden under afpr鴙ningen og svarer 'Ja', s vil DrakX g videre "
-"til n鎠te trin. Hvis du ikke kan se beskeden, betyder det at en del af den "
-"automatisk fundne konfiguration var forkert og testen vil automatisk slutte "
-"efter 12 sekunder, og bringe dig tilbage til menuen. 苙dr indstillingerne "
-"til du f錼 en korrekt grafisk fremvisning.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" vil vise hvilken driver lydkortet bruger \n"
+"som standard\n"
+"- \"grep sound-slot /etc/modules.conf\" vil vise hvilken driver som er i "
+"brug\n"
"\n"
+"- \"/sbin/lsmod\" lader dig se om denne driver er indl鎠t\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" vil\n"
+"vise om disse tjenester er sat op til at startes.\n"
"\n"
-"Valgmuligheder\n"
+"- \"aumix -q\" vil vise om lyden er slukket ned eller ikke\n"
"\n"
-" Du kan h閞 v鎙ge om du 鴑sker at din maskine automatisk skal skifte til "
-"en grafisk gr鎛seflade ved opstart. Selvf鴏gelig vil du 鴑ske at svare Nej, "
-"hvis din maskine skal bruges som server, eller hvis ikke lykkedes dig at f "
-"sk鎟men konfigureret. You can here choose whether you want to have your "
-"machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" vil vise hvilke programmer som bruger "
+"lydkortet\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-" Installationsprogrammet kan normalt automatisk finde ud af at konfigurere "
-"grafikkortet installeret p din maskine. Hvis dette ikke er tilf鎙det kan du "
-"i denne liste v鎙ge det kort du faktisk har.\n"
-" I tilf鎙de af at forskellige drivere er tilg鎛gelige til dit kort, med "
-"eller uden 3D-accelleration, bliver du foresl錯t at v鎙ge den server der "
-"bedst opfylder dine behov."
+"Testsider er blevet sendt til printeren.\n"
+"Dette kan tage lidt tid f鴕 printeren starter.\n"
+"Udskrivningsstatus:\n"
+"%s\n"
+"\n"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux h錸dterer tiden i GMT (Greenwich Mean Time) og overs鎡ter den til "
-"lokal tid if鴏ge den tidszone du har valgt. Hvis uret p bundkortet er sat "
-"til lokal tid, kan du deaktivere dette ved at frav鎙ge 'Maskinens ur sat til "
-"GMT', hvilket vil lade GNU/Linux vide at systemuret og maskinens ur er i "
-"samme tidszone. Dette er nyttigt n錼 maskinen ogs bruges til andre "
-"operativsystemer som Windows.\n"
-"\n"
-"Muligheden 'Automatisk tidssynkronisering' vil automatisk tilpasse uret ved "
-"at forbinde til en ekstern tidsserver p internettet. For at denne facilitet "
-"kan virke, skal du have en fungerende internetforbindelse. Det er bedst at "
-"v鎙ge en tidsserver med en placering n鎟 ved dig. Denne mulighed installerer "
-"faktisk en tidsserver som kan bruges af andre maskiner p dit lokalnetv鎟k."
+msgid "daily"
+msgstr "dagligt"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Denne dialog bruges til at v鎙ge hvilke tjenester du 鴑sker skal startes ved "
-"opstart af maskinen.\n"
-"\n"
-"DrakX vil pr鎠entere alle de tjenester, som er med i den aktuelle "
-"installation. Gennemse hver enkelt omhyggeligt og v鎙g dem fra som ikke "
-"altid er n鴇vendige p opstartstidspunktet.\n"
-"\n"
-"En kort forklarende tekst om en tjeneste bliver vist n錼 den v鎙ges. Hvis du "
-"ikke er sikker p om en tjeneste er nyttig eller ej, er det dog sikrere at "
-"bruge den foresl錯de opf鴕sel.\n"
-"\n"
-"V鎟 specielt varsom p dette trin hvis du planl鎔ger at bruge maskinen som "
-"server: du vil formentlig 鴑ske ikke at starte nogensomhelst tjeneste op som "
-"du ikke har brug for. Husk at adskillige tjenester kan v鎟e farlige hvis de "
-"er aktiveret p en server. V鎙g som hovedregel kun de tjenester som du "
-"virkelig beh鴙er."
+msgid "and one unknown printer"
+msgstr "og en ukendt printer"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"'Printer': Et klik p 'Konfigur閞'-knappen vil 錬ne vejlederen for "
-"printerkonfigurering. Kig i det tilh鴕ende kapitel i 'Startvejledningen' for "
-"mere information om hvordan man ops鎡ter en ny printer. Gr鎛sefladen\n"
-"pr鎠enteret der ligner den som bruges p installationstidspunktet."
+msgid "Ireland"
+msgstr "Irland"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "kerne-version"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Genskab konfiguration "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Er dette den korrekte indstilling?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2689,13 +2424,12 @@ msgid ""
msgstr ""
"Du vil nu kunne ops鎡te din internet- eller netv鎟ksopkobling. Hvis du "
"鴑sker at forbinde din maskine til internettet eller til et lokalnetv鎟k s "
-"klik p 'N鎠te'.\n"
+"klik p '%s'.\n"
"\n"
"Mandrake Linux vil pr鴙e at automatisk finde netv鎟ksenheder og modemer. "
-"Hvis denne s鴊ning mislykkes s fjern markeringen i boksen 'Brug automatisk "
-"detektion' n鎠te gang. Du kan ogs v鎙ge at ikke konfigurere netv鎟ket, "
-"eller g鴕e det senere; i s tilf鎙de vil klik p 'Annull閞'-knappen f鴕e dig "
-"til n鎠te trin.\n"
+"Hvis denne s鴊ning mislykkes s fjern markeringen i boksen '%s' n鎠te gang. "
+"Du kan ogs v鎙ge at ikke konfigurere netv鎟ket, eller g鴕e det senere; i s "
+"tilf鎙de vil klik p '%s'-knappen f鴕e dig til n鎠te trin.\n"
"\n"
"Ved konfigurering af dit netv鎟k er mulighederne for forbindelser: "
"almindeligt modem, ISDN-modem, ADSL-forbindelse, kabel-modem, og endelig en "
@@ -2710,4581 +2444,4338 @@ msgstr ""
"installeret og s bruge programmet beskrevet d閞 til at konfigurere din "
"forbindelse."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Hvis du fortalte installeringen at du 鴑skede at v鎙ge individuelle pakker, "
-"vil den vise et tr med alle pakker opdelt i grupper og undergrupper. Under "
-"gennembladring af tr鎒t kan du udv鎙ge hele grupper, undergrupper eller "
-"individuelle pakker.\n"
-"\n"
-"Hver gang du udv鎙ger en pakke i tr鎒t vil en beskrivelse fremkomme til "
-"h鴍re for at lade dig vide form錶et med pakken. \n"
-"\n"
-"!! N錼 en server-pakke er blevet valgt, enten fordi du specielt valgte den "
-"individuelle pakke, eller fordi den var en del af en gruppe af pakker, vil "
-"du blive spurgt om at bekr鎓te atdu virkelig 鴑sker at installere disse "
-"servere. Som standard under Linux Mandrake bliver installerede servere "
-"startet op ved opstart af maskinen. Selvom de er sikre og ikke har nogen "
-"kendte problemer p udgivelsestidspunktet for distributionen, er det absolut "
-"muligt at sikkerhedshuller opdages efter at denne version af Mandrake Linux "
-"blev f鎟diggjort. Hvis du ikke v閐 hvad en bestemt tjeneste vil g鴕e eller "
-"hvorfor den skal installeres, s klik Nej her. Et klik med Ja her vil "
-"installere de n鎣nte servere og de vil som standard blive startet automatisk "
-"under opstarten!!\n"
-"\n"
-"Automatiske afh鎛gigheder-valget deaktiverer advarselsdialogen, som vises "
-"hver gang installeringsprogrammet automatisk v鎙ger en pakke for at l鴖e et "
-"afh鎛gighedsproblem Nogen pakker har relationer mellem hinanden s "
-"installation af en pakke kr鎣er at nogen andre programmer allerede er "
-"installeret. Installationsprogrammet kan beregne hvilke pakker der er kr鎣et "
-"for at tilfredsstille en afh鎛gighed for at kunne f鎟digg鴕e en installation "
-"problemfrit.\n"
-"\n"
-"Det klejne disketteikon i bunden af listen muligg鴕 indl鎠ning af en "
-"pakkeliste udvalgt ved en tidligere installation. Dette er nyttigt hvis du "
-"har et antal maskiner som du 鴑sker at konfigurere p samme m錮e. Klik p "
-"denne ikon vil bede dig om at inds鎡te en diskette tidligere frembragt ved "
-"slutningen p en anden installation. Se r錮 nr to i det sidste trin for "
-"hvordan en s錮an diskette kan laves."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere p dit system. "
-"Der er tusindvis af pakker til dit Mandrake Linux system, og for at g鴕e det "
-"nemmere at h錸dtere dem er pakker blevet placeret i grupper af lignende "
-"programmer.\n"
-"\n"
-"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-"maskine. Mandrake Linux har 4 foruddefinerede installationer tilg鎛gelige. "
-"Du kan t鎛ke p installationsklasserne som beholdere for forskellige pakker. "
-"Du kan v鎙ge og vrage programmer fra de forskellige beholdere, s en "
-"installation af 'Arbejdsstation' kan ogs have programmer fra "
-"udviklingsbeholderen installeret.\n"
-"\n"
-" * 'Arbejdsstation': Hvis din maskine skal bruges som en arbejdsstation, "
-"v鎙g da en eller flere af programmerne der er i arbejdsstationsbeholderen.\n"
-"\n"
-" * 'Udvikling': hvis du vil bruge maskinen til programmering v鎙g da de "
-"rigtige pakker fra beholderen.\n"
-"\n"
-" * 'Server': hvis det er planen at maskinen skal v鎟e en server, s v鎙g de "
-"mere almindelige tjenester, som du 鴑sker at installere p maskinen.\n"
-"\n"
-" * 'Grafisk milj': her skal du v鎙ge foretrukne grafiske milj. V鎙g mindst "
-"閠, hvis du 鴑sker at have en grafisk gr鎛seflade tilg鎛gelig.\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
-"denne gruppe. Hvis du ikke v鎙ger nogen grupper ved installation (i "
-"mods鎡ning til en opgradering), vil en dialog komme frem som foresl錼 dig "
-"forskellige former for minimal installation: \n"
-"\n"
-" * 'Med X' installerer de f鎟rest mulige antal pakker for at f en "
-"fungerende grafisk arbejdsstation.\n"
-"\n"
-" * 'Med basal dokumentation' installerer det basale system plus basale "
-"nytteprogrammer og tilh鴕ende dokumentation. Denne installation er passende "
-"til at s鎡te en server op.\n"
-"\n"
-" * 'Mindst mulige installering' vil installere det absolut mindst mulige "
-"antal pakker n鴇vendigt for at f et virkende Linux-system. Med denne "
-"installation f錽 kun en gr鎛seflade med kommandolinjer. Den totale st鴕relse "
-"af denne installation er 65 megabyte.\n"
-"\n"
-"Du kan afkrydse boksen 'Individuelt pakkevalg', hvilket er nyttigt, hvis du "
-"kender de tilbudte pakker godt, eller hvis du 鴑sker at have fuld kontrol "
-"over hvad der skal installeres.\n"
-"\n"
-"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du frav鎙ge "
-"alle grupper for at undg at installere nogen nye pakker. Dette er nyttigt "
-"ved reparation eller opdatering af det eksisterende system."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux installationen er fordelt p flere cdrom-er. DrakX v閐 om en "
-"valgt pakke ligger p en anden cdrom, s den vil udskyde den aktuelle cd og "
-"bede dig om at is鎡te den rigtige, om n鴇vendigt."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Her er listet de eksisterende Linux-partitioner genkendt p din disk. Du kan "
-"beholde valgene gjort af vejlederen, de er velegnede til almindelig brug. "
-"Hvis du 鎛drer disse valg skal du i det mindste definere en rod-partition "
-"'/'. Lad v鎟e med at v鎙ge en for lille partition, ellers vil du ikke kunne "
-"installere nok programmel. Hvis du 鴑sker at lagre data p en separat "
-"partition, skal du ogs v鎙ge en '/home' (kun muligt hvis du har mere end 閚 "
-"Linux-partition). \n"
-"Hver partition er listet som f鴏ger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som f鴏ger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-" * 'a' betyder 'hoved-drev p den prim鎟e IDE controller',\n"
-"\n"
-" * 'b' betyder 'slave-drev p den prim鎟e IDE controller',\n"
-"\n"
-" * 'c' betyder 'hoved-drev p den s鎘und鎟e IDE controller',\n"
-"\n"
-" * 'd' betyder 'slave-drev p den s鎘und鎟e IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'f鴕ste drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, det vil sige at hver bruger kan have sine "
-"egne pr鎓erencer, sine egne filer og s videre. Du kan l鎠e "
-"startvejledningen for at l鎟e mere om flerbrugersystemer.\n"
-"I mods鎡ning til root, som er administratoren, vil brugerne som du tilf鴍er "
-"her ikke have lov til at 鎛dre nogetsomhelst undtagen deres egne filer og "
-"deres egen ops鎡ning, hvilket beskytter systemet mod utilsigtede eller "
-"ondartede 鎛dringer som p鍁irker hele systemet. Du skal oprette i det "
-"mindste 閚 almindelig bruger til dig selv - dette er den konto som du b鴕 "
-"bruge til almindelig dagligt brug. Selvom det er meget nemt at logge ind som "
-"root for at g鴕e alt, kan det ogs v鎟e meget farligt!\n"
-"En fejltagelse kan betyde at dit system ikke vil virke mere. Hvis du laver "
-"en alvorlig fejltagelse som almindelig bruger, vil det v鎟ste der kan ske at "
-"du vil tabe nogen information, men det vil ikke p鍁irke hele systemet.\n"
-"\n"
-"Det f鴕ste felt sp鴕ger efter dit rigtige navn. Dette er naturligvis ikke "
-"kr鎣et -du kan faktisk skrive hvad du lyster. DrakX vil bruge det f鴕ste ord "
-"du indtastede i boksen og kopiere det til brugernavns-feltet, hvilket er "
-"navnet, som denne bruger skal indtaste for at logge ind p systemet. Hvis du "
-"鴑sker det kan du overskrive det forvalgte of 鎛dre brugernavnet. Det n鎠te "
-"trin er at indtaste en adgangskode. Fra et sikkerhedsm鎠sigt synspunkt er "
-"adgangskoden for en ikke-priviligeret (normal) bruger er ikke s vigtigt som "
-"det for Root, men det er ingen grund til at negligere det alligevel, ved at "
-"lade det v鎟e blankt eller at g鴕e det for nemt - n錼 det kommer til stykket "
-"er dine egne filer der er i fare.\n"
-"\n"
-"N錼 du har klikket p 'Accept閞 bruger', kan du tilf鴍e andre brugere. "
-"Tilf鴍 en bruger for hver af dine venner: fx din far og din s鴖ter. N錼 du "
-"har tilf鴍et alle de brugere du 鴑sker, v鎙g da 'N鎠te ->'.\n"
-"\n"
-"Klik p Avanceret-knappen lader dig 鎛dre standard-sk醠 for denne bruger\n"
-"(bash er standard). \n"
-"\n"
-"N錼 du er f鎟dig med at tilf鴍e alle brugere, vil du blive spurgt om at "
-"v鎙ge en bruger som automatisk kan logge ind p systemet n錼 maskinen "
-"startes op. Hvis du er interesseret i denne facilitet (og ikke k鎟er dig "
-"synderligt om lokal sikkerhed), s v鎙g den 鴑skede bruger og "
-"vinduesh錸dtering og klik 'N鎠te ->'.\n"
-"Hvis du ikke er interesseret i denne facilitet, s afmark閞 boksen med "
-"'豱sker du at bruge denne facilitet?'"
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"F鴕 du g錼 videre b鴕 du l鎠e betingelserne i licensen omhyggeligt. Den "
-"omfatter hele Mandrake Linux distributionen. Hvis du er enig i alle "
-"betingelserne i den, s klik p 'Accept閞'-knappen. Hvis ikke, s kan du "
-"bare slukke for maskinen."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Du skal ogs formatere %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kunne ikke f adgang til kernemoduler svarende til din kerne (fil %s "
-"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
-"med installationsmediet (lav en nyere opstartsdiskette)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opst錯t en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Unders鴊 din maskine for at finde 錼sagen "
-"til problemet"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved l鎠ning af filen %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For at bruge dette gemte pakkevalg, start installationen op med``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "Konfiguration med vejleder"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Denne diskette er ikke formatteret til FAT"
+msgid "Autoprobe"
+msgstr "Automatisk sondering"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inds鎡 en tom diskette i diskette-drev %s"
+msgid "Backup system files..."
+msgstr "Sikkerhedskopi閞 systemfiler..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Kan ikke bruge rundkastning uden noget NIS-dom鎛e"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"De f鴏gende pakker vil blive fjernet for at kunne opdatere systemet: %s\n"
-"\n"
-"\n"
-"豱sker du virkelig at fjerne disse pakker?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Nej"
+msgid "Removing printer \"%s\"..."
+msgstr "Fjerner printer \"%s\"..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Du har valgt f鴏gende servere: %s\n"
-"\n"
-"\n"
-"Disse servere er aktiveret som standard. De har ingen kendte "
-"sikkerhedsproblemer, men nogen nye kan blive fundet. I s tilf鎙de skal du "
-"opgradere s snart som mulig.\n"
+"Angiv venligst hvor auto_install.cfg-filen er placeret.\n"
"\n"
+"Lad den v鎟e blank hvis du ikke 鴑sker at ops鎡te en automatisk "
+"installationstilstand.\n"
"\n"
-"豱sker du virkelig at installere disse servere?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Systemkonfiguration"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "System-installering"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Lukker netv鎟ket ned"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Informationsniveau som kan opn錽 via cpuid-instruktionen"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Bringer netv鎟ket op"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
+msgid " on device: %s"
+msgstr " p enhed: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-vejlederen fandt de f鴏gende l鴖ninger:"
+msgid "Remove Windows(TM)"
+msgstr "Fjern Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Kan ikke finde plads til installering"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"Starter X-font serveren (dette er obligatorisk for at XFree skal k鴕e)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Du kan nu partitionere %s.\n"
-"N錼 du er f鎟dig, s husk at gemme med 'w'"
+"De fleste af disse v鎟dier blev fundet\n"
+"fra dit k鴕ende system.\n"
+"Du kan 鎛dre dem efter behov."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Brug fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "V鎙g skrifttypefilen eller -kataloget oh klik p 'Tilf鴍'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil g tabt p drev %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken 鴑sker du at installere Linux p?"
+msgid "Cron not available yet as non-root"
+msgstr "Cron er ikke tilg鎛gelig endnu som ikke-root"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
+msgid "System"
+msgstr "System"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "豱sker du at bruge denne facilitet?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at 鎛dre st鴕relse p (eller ikke nok plads "
-"tilbage)"
+msgid "Arabic"
+msgstr "Arabisk"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"For at sikre dataintegritet efter 鎛dring af st鴕relse p partitioner \n"
-"vil filsystemtjek blive k鴕t ved din n鎠te opstart af Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT st鴕relses鎛dring mislykkedes: %s"
+"\n"
+"- Muligheder:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Udregner Windows-filsystemets gr鎛ser"
+msgid "Password required"
+msgstr "Adgangskode kr鎣et"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "苙drer st鴕relsen"
+msgid "%d minutes"
+msgstr "%d minutter"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "partition %s"
+msgid "Graphics card: %s"
+msgstr "Grafikkort: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hvilken st鴕relse 鴑sker du at at beholde Windows p?"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV overf鴕sel mislykkedes!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu 鎛dre st鴕relsen p din Windows-partition. Udvis forsigtighed: "
-"denne operation er farlig. Hvis du ikke allerede har gjort det, b鴕 du f鴕st "
-"g ud af denne installation, k鴕e scandisk under Windows (og eventuelt "
-"defrag) og s genstarte installationen. Du b鴕 ogs tage en sikkerhedskopi "
-"af dine data. Tryk p Ok, hvis du er helt sikker."
+msgid "XFree configuration"
+msgstr "XFree konfiguration"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "Din Windows partition er for fragmenteret, k鴕 'defrag' f鴕st"
+msgid "Choose action"
+msgstr "V鎙g handling"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Beregner st鴕relsen p Windows-partitionen"
+msgid "French Polynesia"
+msgstr "Fransk Polynesien"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"Programmet til at 鎛dre st鴕relse p FAT kan ikke behandle din partition, \n"
-"den f鴏gende fejl opstod: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition 鴑sker du at 鎛dre st鴕relse p?"
+"Normalt har DrakX ingen problemer med at finde ud af hvor mange knapper du "
+"har p din mus. Den antager at du har en to-knapsmus og vil lave en "
+"ops鎡ning hvor den tredje knap emuleres. Den tredje knap for en to-knaps mus "
+"emuleres ved at trykke p den venstre og h鴍re museknap samtidigt. DrakX vil "
+"automatisk vide om din mus bruger et PS/2 eller et USB-gr鎛sesnit.\n"
+"\n"
+"Hvis du 鴑sker en anden type mus, v鎙g da den rigtige type mus fra den viste "
+"liste.\n"
+"\n"
+"Hvis du v鎙ger en mus forskellig fra den forvalgte, vil du blive pr鎠enteret "
+"for en sk鎟m for museafpr鴙ning. Brug knapperne og hjulet for at efterpr鴙e, "
+"om indstillerne er korrekte, og at musen virker korrekt. Hvis musen ikke "
+"virker korrekt, tryk da p mellemrumstangenten eller vognretur for at "
+"annullere testen og g tilbage til listen med valg.\n"
+"\n"
+"Mus med hjul findes til tider ikke automatisk., s du vil beh鴙e at v鎙ge "
+"din mus fra en liste. Forsikr dig om at du v鎙ger den der passer til porten "
+"som din mus er tilsluttet. Efter valg af en mus og tryknin p '%s'-knappen "
+"vises et billede med en mus p sk鎟men. Rul med musehjulet for at forsikre "
+"dig om at det aktiveres korrekt. N錼 du har set at musehjulet p sk鎟men "
+"bev鎔er sig som du ruller med musehjulet, s afpr鴙 museknapperne og tjek at "
+"musemark鴕en flytter sig n錼 du flytter p musen."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads p Windows-partitionen"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "St鴗ter OKI 4w og kompatible winprintere."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at bruge som loopback (eller ikke nok plads "
-"tilbage)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions st鴕relse i Mb: "
+msgid "Installing driver for %s card %s"
+msgstr "Installerer driver for %s kort %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions st鴕relse i Mb: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Du har overf鴕t din tidligere standard-printer '%s', skal den ogs v鎟e "
+"standard-printer under det nye printersystem %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "V鎙g st鴕relserne"
+msgid "Enable Server"
+msgstr "Aktiv閞 server"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrainsk"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Netv鎟ksadgangen k鴕te ikke og kunne ikke startes. Tjek din konfiguration og "
+"dit udstyr. Pr鴙 derefter at konfigurere din eksterne printer igen."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Inds鎡 opstartsdisketten i diskette-drevet %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Brug eksisterende partition"
+msgid "Local network(s)"
+msgstr "Lokalnetv鎟k"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
+msgid "Remove Windows"
+msgstr "Fjern Windows"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Brug fri plads"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Din %s er blevet konfigureret.\n"
+"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik i "
+"programmenuen."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire-kontrolkort"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Du har ingen Swap partition\n"
+"Efter du har konfigureret de generelle parametre for opstartsindl鎠eren, vil "
+"listen med opstartsmuligheder, som vil v鎟e tilg鎛geligt ved opstarten, "
+"blive vist.\n"
"\n"
-"Forts鎡 alligevel?"
+"Hvis der er andre operativsystemer installeret p din maskine, vil de "
+"automatisk blive tilf鴍et til opstartsmenuen. Du kan finjustere de "
+"eksisterende muligheder ved at klikke '%s' for at oprette en ny indgang; "
+"v鎙g en indgang og klik p '%s' eller '%s' for at 鎛dre eller fjerne den. '%"
+"s' bekr鎓ter dine 鎛dringer.\n"
+"\n"
+"M錽ke vil du ikke 鴑ske at givea dgang til disse andre operativsystemer til "
+"nogensomhelst, som har adgang til konsollen og genstarter maskinen. Du kan "
+"slette de tilsvarende indgange til operativsystemerne for at fjerne dem fra "
+"opstartsindl鎠erens menu, men du vil s have brug for en opstartsdiskette "
+"for at kunne starte disse andre operativsystemer op!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at f dette, lav en ny partition (eller "
-"v鎙g en eksisterende).\n"
-"V鎙g s kommandoen \"Monterings-sti\" og s鎡 den til `/'"
+msgid "System mode"
+msgstr "Systemtilstand"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Noget maskinel p din maskine skal bruge ''propriet鎟e'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
+"For at skrive til en NetWare printer skal du angive navnet p NetWare "
+"printerserveren (bem鎟k at dette navn kan v鎟e forskelligt fra TCP/IP-"
+"navnet!) s鍁el som k鴑avnet for den printer du vil benytte samt om "
+"n鴇vendigt et brugernavn og en adgangskode."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er f鎟dig.\n"
-"Fjern boot-mediet og tryk retur for at genstarte.\n"
-"\n"
-"\n"
-"For information om rettelser til denne udgivelse af Mandrake Linux, se "
-"Errata p:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
-"installation i den Officielle Mandrake Linux Brugervejledning."
+msgid "Netmask:"
+msgstr "Netmaske:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Vedh鎓t"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Opfrisk printerliste (for at vise alle tilg鎛gelige eksterne CUPS-printere)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"N錼 denne valgmulighed er valgt, vil CUPS hver gang den starter forsikre sig "
+"om at\n"
"\n"
-"Advarsel\n"
-"\n"
-"L鎠 venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
-"der st錼, m du ikke installere indholdet af CD-en. Tryk p 'N鎔t' for at "
-"forts鎡te installationen uden disse cdrommer.\n"
-"\n"
+"- hvis LPD/LPRng er installeret, vil /etc/printcap ikke overskrives af CUPS\n"
"\n"
-"Visse komponenter p den n鎠te CD er ikke omfattet af GPL-licensen eller "
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af de "
-"betingelser der er beskrevet i dets egen licens. L鎠 derfor venligst "
-"betingelserne omhyggeligt og f鴏g de opstillede betingelser n錼 du bruger og/"
-"eller videredistribuerer komponenterne. S錮anne licenser forhindrer normalt "
-"kopiering (sikkerhedskopiering undtaget), videredistribuering, at folk "
-"skiller programmet ad, eller 鎛drer i komponenterne. Ethvert brud p "
-"licensen vil 鴍eblikkeligt fratage dig rettighederne beskrevet i den "
-"specifikke licens. Medmindre licensen giver dig lov hertil, vil det normalt "
-"ikke v鎟e tilladt at installere programmet p mere end 閚 maskine, eller "
-"bruge det p et netv鎟k. Hvis du er i tvivl, s kontakt venligst producenten "
-"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
-"s錮anne komponenter inklusive dokumentationen er normalt forbudt.\n"
+"- hvis /etc/cups/cupsd.conf mangler, vil den blive oprettet\n"
"\n"
+"- n錼 printerinformation rundsendes, vil den ikke indeholde \"localhost\" "
+"som servernavn.\n"
"\n"
-"Alle rettigheder til komponenterne p CD-en tilh鴕er deres respektive "
-"skabere og er beskyttet af Lov om Ophavsret.\n"
+"Hvis nogen af disse ting giver dig problemer, s fjern denne valgmulighed, "
+"men da m du selv s鴕ge for at disse punkter bliver overholdt."
-# Mangler
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilg鎛gelige i Mandrake Linux "
-"distributionen vil herefter blive kaldt \"programmelprodukter\". "
-"Programmelprodukterne inkluderer, men er ikke begr鎛set til: samlingen af "
-"v鎟kt鴍er, metoder, regler og dokumentation relateret til operativsystemet "
-"og de forskellige komponenter i Mandrake Linux-distributionen.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"L鎠 venligst dette dokument omhyggeligt. Dette dokument er en licensaftale "
-"mellem dig og MandrakeSoft S.A., som g鎙der til disse programmelprodukter. "
-"Ved at installere, kopiere eller bruge disse programmelprodukter accepterer "
-"du udtrykkeligt og fuldt ud denne licensaftale med dens betingelser og "
-"regler. Hvis du er uenig i nogensomhelst del af denne licens, mister du "
-"retten til at installere, kopiere eller bruge disse programmelprodukter. "
-"Hvilket som helst fors鴊 p at installere, kopiere eller bruge disse "
-"programmelprodukter p en m錮e som ikke er i overensstemmelse med "
-"betingelserne og reglerne i denne licens er ulovlig og vil betyde at du "
-"mister dine rettighedder under denne licens. Hvis dette sker, skal du med "
-"det samme 鴇el鎔ge alle kopier af disse programmelprodukter.\n"
-"\n"
-"\n"
-"2. Begr鎛set garanti\n"
-"\n"
-"Programmelprodukterne og tilh鴕ende dokumenter leveres \"som de er\", uden "
-"nogen form for garanti, i den udstr鎘ning lov tillader. MandrakeSoft S.A. "
-"vil under ingen omst鎛digheder undtagen hvad lov foreskriver v鎟e ansvarlig "
-"for specielle, tilf鎙dige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begr鎛sninger, skader ved tab af forretning, "
-"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
-"som resultat af en retssag eller nogen anden form for f鴏getab) opst錯t "
-"under brugen eller mangel p samme af disse programmelprodukter, selv hvis "
-"MandrakeSoft S.A. er blevet gjort opm鎟ksom p muligheden for eller "
-"indtr鎓felsen af s錮anne skader.\n"
-"\n"
-"BEGR芅SET ANSVAR MED HENSYN TIL REGLER OM BESIDDELSE ELLER BRUG AF FORBUDT "
-"PROGRAMMEL I VISSE LANDE\n"
-"\n"
-"I den udstr鎘ning som loven tillader vil MandrakeSoft S.A. eller deres "
-"distribut鴕er under ingen omst鎛digheder v鎟e ansvarlig for specielle, "
-"tilf鎙dige, direkte eller indirekte tab af nogen art (inklusive uden "
-"begr鎛sninger skader ved tab af forretning, forstyrrelser af forretning, "
-"finansielle tab, advokatbistand, erstatninger som resultat af en retssag "
-"eller nogen anden form for tab) opst錯t ved besiddelse eller brug af "
-"programmelkomponenter eller opst錯t ved hentning af programmelkomponenter "
-"fra et af Mandrake Linux webstederne som er forbudt eller begr鎛set i visse "
-"lande ved lokal lov. Dette begr鎛sede ansvar g鎙der, men er ikke begr鎛set "
-"til, de st鎟ke krypteringskomponenter inkluderet i programmelprodukterne.\n"
-"\n"
-"\n"
-"3. GPL-licensen og relaterede licenser\n"
-"\n"
-"Dette programmel best錼 af komponenter lavet af forskellige personer eller "
-"enheder. De fleste af disse komponenter bliver reguleret efter vilk錼ene og "
-"aftalerne i GNU General Public License, herefter kaldet \"GPL\", eller "
-"lignende licenser. De fleste af disse licenser tillader dig at bruge, "
-"kopiere, tilpasse eller redistribuere komponenterne, de d鎘ker. L鎠 venligst "
-"vilk錼ene og betingelserne i licensaftalen for hver komponent omhyggeligt "
-"f鴕 du bruger det. Alle sp鴕gsm錶 ang錯nde en komponent bedes adresseret til "
-"komponentens forfatter og ikke til MandrakeSoft. Programmerne udviklet af "
-"MandrakeSoft S.A. bliver reguleret efter GPL-licensen. Dokumentationen "
-"skrevet af MandrakeSoft S.A. bliver reguleret efter en specifik licens. "
-"Refer閞 venligst til dokumentationen for yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder\n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilh鴕er deres "
-"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
-"ophavsretslove, g鎙dende for programmel. MandrakeSoft S.A. forbeholder sine "
-"rettigheder til at 鎛dre eller tilpasse programmelprodukterne, helt eller "
-"delvist, med alle midler og til alle form錶. \"Mandrake\", \"Mandrake Linux"
-"\" samt de tilh鴕ende logoer er varem鎟ker for MandrakeSoft S.A. \n"
+"OSS (Open Sound System) var den f鴕ste lyd-API. Det er den f鴕ste OS-"
+"uafh鎛gige lyd-API (Den er tilg鎛gelig p de fleste Unix-systemer) men den "
+"er en meget basal og begr鎛set API.\n"
+"Ydermere genopfandt alle OSS-drivere hjulet.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) er en modul鎟 arkitektur som\n"
+"underst鴗ter en ganske stor m鎛gde ISA-, USB- og PCI-kort.\n"
"\n"
-"5. Styrende love\n"
+"Den tilbyder ogs en meget h鴍ere API end OSS.\n"
"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafg鴕else, vil disse dele blive ekskluderet fra denne kontrakt. "
-"Du vil forblive bundet af de andre g鎙dende dele af aftalen. Vilk錼ene og "
-"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
-"vedr鴕ende vilk錼ene i denne licens vil fortrinsvist blive l鴖t udenfor "
-"domstolene. Som en sidste udvej vil uenighederne blive h錸dteret ved den "
-"rette domstol i Paris, Frankrig. Ved sp鴕gsm錶 omkring dette dokument, "
-"kontakt venligst MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "G錼 til trin `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Hj鎙p"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "ikke konfigureret"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Konfigur閞"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Forts鎡 alligevel?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
+"For at bruge ALSA kan man enten bruge:\n"
+"- den gamle OSS-kompatibilitetes-api\n"
+"- den nye ALSA API som tilbyder mange forbedrede faciliteter men som kr鎣er "
+"brug af ALSA-biblioteket.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Skift din cdrom!\n"
+"Autoinstallation kan ske fuldautomatisk hvis 鴑sket. I s tilf鎙de vil den "
+"overtage hele harddisken!! (dette er beregnet til at installere p en anden "
+"maskine).\n"
"\n"
-"Inds鎡 cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk p Ok, n錼 det "
-"gjort\n"
-"Hvis du ikke har den s tryk p Annull閞, s undg錽 installation fra denne cd"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "N鎔t"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Accept閞"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Ingen detaljer"
+"Du foretr鎘ker m錽ke at afspille installationen igen\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detaljer"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netv鎟ksprinter '%s', port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Vent venligst, forbereder installationen"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "V鎙g hvilken netv鎟ksadapter som skal forbindes til dit lokalnet."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Resterende tid "
+msgid "OK to restore the other files."
+msgstr "O.k. at genskabe de andre filer."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Beregnes"
+msgid "Please choose your keyboard layout."
+msgstr "V鎙g dit tastaturlayout."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Installerer"
+msgid "Printer Device URI"
+msgstr "Printer-enheds URI"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "V鎙g pakker som skal installeres"
+msgid "Not erasable media!"
+msgstr "Ikke sletbart medie!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimal installation"
+msgid "Terminal-based"
+msgstr "Terminal-baseret"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
+msgid "Installing a printing system in the %s security level"
+msgstr "Installerer et printersystem p sikkerhedsniveauet %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Indl鎠/gem p diskette"
+msgid "The user name is too long"
+msgstr "Dette brugernavn er for langt"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Forrige"
+msgid "Other OS (windows...)"
+msgstr "Andet styresystem (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Install閞"
+msgid "WebDAV remote site already in sync!"
+msgstr "WebDAV eksternt netsted allerede synkroniseret!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
+msgid "Reading printer database..."
+msgstr "L鎠er database over printere ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke frav鎙ge denne pakke. Den skal opgraderes"
+msgid "Generate auto install floppy"
+msgstr "Laver autoinstallations-diskette"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker p at du vil frav鎙ge den?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke frav鎙ge denne pakke. Den er allerede installeret"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en n鴇vendig pakke, den kan ikke v鎙ges fra"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke v鎙ge/frav鎙ge denne pakke"
+"\t\t brugernavn: %s\n"
+"\t\t p sti: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "De f鴏gende pakker vil blive afinstalleret"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "De f鴏gende pakker vil blive installeret"
+msgid "No open source driver"
+msgstr "Ingen open source driverrutine"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Du kan ikke v鎙ge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
+"Baseret p det foreg錯nde niveau, men systemet er nu helt lukket.\n"
+"Sikkerhedsfaciliteterne er nu p deres h鴍este niveau."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Vigtighed: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "St鴕relse: %d KB\n"
+msgid "New Caledonia"
+msgstr "Ny Caledonien"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protokol for Europa (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
+msgid "Video mode"
+msgstr "Videoindstilling"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "D錼lig pakke"
+msgid "Please enter your email address below "
+msgstr "Indtast din adgangskode for epost nedenfor"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Andet"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total st鴕relse: %d / %d Mb"
+msgid "Network Monitoring"
+msgstr "Overv錱ning af netv鎟k"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "N鎠te ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
+msgid "New size in MB: "
+msgstr "Ny st鴕relse i Mb: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
+msgid "Partition table type: %s\n"
+msgstr "Partitionstabel-type: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Dit system har kun f resurser. Du kan f problemer med at installere\n"
-"Mandrake Linux. Hvis dette sker, kan du pr鴙e en tekst-baseret installation "
-"i stedet\n"
-"Dette g鴕es ved at trykke 'F1' ved opstart fra cdrommen, og s skrive 'text'."
+msgid "Authentication Windows Domain"
+msgstr "Autentifikations Windowsdom鎛e"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
+msgid "US keyboard"
+msgstr "Amerikansk"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatisk"
+msgid "Buttons emulation"
+msgstr "Emulering af knapper"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Afspil igen"
+msgid ", network printer \"%s\", port %s"
+msgstr ", netv鎟ksprinter \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis 鴑sket. I s tilf鎙de vil den "
-"overtage hele harddisken!! (dette er beregnet til at installere p en anden "
-"maskine).\n"
"\n"
-"Du foretr鎘ker m錽ke at afspille installationen igen\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Genstart"
+"Drakbackup aktiviteter via b錸d:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Nogen dele af installationen er ikke f鎟dig\n"
"\n"
-"Er du sikker p du 鴑sker du at lukke nu?"
+"FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler via "
+"FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Laver autoinstallations-diskette"
+msgid "Sending Speed:"
+msgstr "Sendehastighed:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inds鎡 en tom diskette i drev %s"
+msgid "Halt bug"
+msgstr "Halt-fejl"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du beh鴙er m錽ke at 鎛dre din 舃en Firmware opstartsenhed for at sl "
-"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
-"s hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv s: shut-down\n"
-"Ved n鎠te opstart burde du se systemstarteren."
+msgid "Mail alert configuration"
+msgstr "Konfiguration af postp錷indelse"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation af opstarter mislykkedes. Den f鴏gende fejl opstod:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Installerer systemopstarter"
+msgid "Bosnian"
+msgstr "Bosnisk"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"fors鴊 at gennemtvinge installation selv om dette kan 鴇el鎔ge den f鴕ste "
-"partition?"
+msgid "Release: "
+msgstr "Udgave: "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "豱sker du at bruge aboot?"
+msgid "Connection speed"
+msgstr "Opkoblingshastighed"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
-"opstartsindl鎠eren vil ikke virke for dig. Installationen vil forts鎡te, men "
-"du skal bruge BootX eller en anden m錮e til at starte din maskine."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Forbereder opstarter..."
+"Indtast din CD-br鎛ders enhedsnavn\n"
+" fx: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Adgangskode for dom鎛eadministrator"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Brugernavn for dom鎛eadministrator"
+msgid "Database Server"
+msgstr "Databaseserver"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows Domain"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"specielle kapaciteter for driveren (br鎛demulighed eller DVD-underst鴗telse)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autentifikations Windowsdom鎛e"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Kan ikke tilf鴍e en partition til _format閞et_ RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"For at dette kan virke p en W2K PDC skal du nok have administratoren til at "
-"k鴕e: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add og genstarte serveren.\n"
-"Du skal ogs have et brugernavn og en adgangskode for at maskinen kan "
-"tilsluttes Windows(TM)-dom鎛et.\n"
-"Hvis netv鎟ket ikke er aktiveret vil Drakx pr鴙e at slutte til dom鎛et efter "
-"trinnet med ops鎡ning af netv鎟k.\n"
-"Skulle denne ops鎡ning fejle af nogen 錼sag, og dom鎛eautentifikation ikke "
-"virke, s k鴕 'smbpasswd -j DOMAIN -U USER%%PASSWORD' med dit Windows(tm) "
-"dom鎛e og administrators brugernavn/adgangskode, efter genstart af "
-"systemet.\n"
-"Kommandoen 'wbinfo -t' vil afpr鴙e om dine hemmelige autentifikationsdata er "
-"i orden."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-dom鎛e"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autentificering NIS"
+"Dit kort kan have 3D acceleration underst鴗telse, men kun med XFree %s.\n"
+"VIGTIGT: Dette er eksperimentelt og kan f din maskine til at l錽e eller g "
+"ned.\n"
+"Dit kort er underst鴗tet af XFree %s som kan have bedre underst鴗telse i 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Vent venligst, s鎡ter sikkerhedstilvalg..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Ukendt|CPH05X (bt878) [mange leverand鴕er]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP grundl鎔gende dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Start X-vinduessystemet efter opstart"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentificering LDAP"
+msgid "hourly"
+msgstr "timeligt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " genskabt uden fejl p %s "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lokale filer"
+msgid "Making printer port available for CUPS..."
+msgstr "G鴕 printerport tilg鎛gelig for CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Identifikation"
+msgid "Antigua and Barbuda"
+msgstr "Antigua og Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Denne adgangskode er for nemt at g鎡te (det skal mindst v鎟e p %d tegn)"
+"!!! Indikere at adgangskoden i systemets database er forskelligt fra\n"
+" den i TerminalServer-databasen.\n"
+"Slet/tilf鴍 brugeren igen il TerminalServeren for at muligg鴕e logind."
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password"
-msgstr "Ingen adgangskode"
+msgid "Spanish"
+msgstr "Spansk"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Set root password"
-msgstr "S鎡 root-adgangskode"
+msgid "Start"
+msgstr "Start"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"Du har ikke konfigureret X. Er du sikker p at du virkelig 鴑sker dette?"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
+"Argumenter: (arg)\n"
+"\n"
+"Aktiv閞/deaktiv閞 錬enhedstjek p ethernetkort."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Tjenester"
+msgid "Configuring applications..."
+msgstr "Konfigurerer programmer..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "System"
+msgid "Normal modem connection"
+msgstr "Normal modemforbindelse"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s p %s"
+msgid "File Selection"
+msgstr "Valg af filer"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Systemopstarter"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Hvilken ISDN-konfigurering foretr鎘ker du?\n"
+"\n"
+"* Den gamle konfiguration bruger isdn4net. Det har st鎟ke\n"
+" v鎟kt鴍er, men det er vanskeligt at konfigurere for en nybegynder,\n"
+" og er ikke standardbaseret.\n"
+"\n"
+"' Det nye konfigurationsv鎟kt鴍 er enklere at forst,\n"
+" mere standardiseret, men med f鎟re v鎟kt鴍er.\n"
+"\n"
+"Vi anbefaler den nye konfiguration.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Opstart"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "deaktiveret"
+msgid "Run config tool"
+msgstr "K鴕 konfigurationsv鎟kt鴍"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiveret"
+msgid "Bootloader installation"
+msgstr "Systemopstarterens installation"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Brandmur"
+msgid "Root partition size in MB: "
+msgstr "Rod-partitions st鴕relse i Mb: "
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sikkerhed"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Dette er en n鴇vendig pakke, den kan ikke v鎙ges fra"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Sikkerhedsniveau"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO-aftryk er %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Netv鎟k"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) er en dom鎛e-navneserver (DNS) der bruges til opslag af IP-"
+"adresser for v鎟tsnavne."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Netv鎟k og Internet"
+msgid "Disconnect..."
+msgstr "Afbrud..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafisk gr鎛seflade"
+msgid "Saint Lucia"
+msgstr "Sankt Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Udstyr"
+msgid "Report"
+msgstr "Rapport"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-kort"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Intet lydkort genkendt. Pr鴙 at k鴕e \"harddrake\" efter installation"
+msgid "level"
+msgstr "niveau"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "K鴕 \"sndconfig\" efter installation for at konfigurere dit lydkort"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Alle h鎛delser f鴏ges op af en teknisk kvalificeret MandrakeSoft-ekspert."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA-lydkort?"
+msgid "Package Group Selection"
+msgstr "Valg af pakkegrupper"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Lydkort"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Genskab via netv鎟ksprotokol: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
+msgid "You can configure each parameter of the module here."
+msgstr "Du kan konfigurere hver parameter for modulet her."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Ingen printer"
+msgid "Choose the resolution and the color depth"
+msgstr "V鎙g opl鴖ning og farvedybde"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Printer"
+msgid "Emulate third button?"
+msgstr "Emulering af tredje knap?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Mus"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Du kan ikke oprette en ny partition\n"
+"(fordi du er oppe p det maksimale antal prim鎟e partitioner)\n"
+"Fjern f鴕st en prim鎟 partition og opret en udvidet partition."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Tidszone"
+msgid "Mount"
+msgstr "Mont閞"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Tastatur"
+msgid "Creating auto install floppy"
+msgstr "Laver autoinstallations-diskette"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Oversigt"
+msgid "Install updates"
+msgstr "Install閞 opdateringer"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP-server"
+msgid "text box height"
+msgstr "h鴍de p tekstrude"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hj鎙p af NTP)"
+msgid "State"
+msgstr "Status"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Forsikr dig at der er et medie tilstede i enheden %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
+msgid "Enable multiple profiles"
+msgstr "Aktiv閞 multiprofiler"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Vil du gerne pr鴙e igen?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
+"katalog.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kan ikke kontakte spejl: %s"
+msgid "Local printer"
+msgstr "Lokal printer"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontakter spejlet for at hente listen af tilg鎛gelige pakker"
+msgid "Files Restored..."
+msgstr "Filer genskabte..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "V鎙g det spejl hvorfra pakkerne skal hentes"
+msgid "Package selection"
+msgstr "Valg af pakker"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Kontakter Mandrake Linux netsted for at hente listen over tilg鎛gelige spejle"
+msgid "Mauritania"
+msgstr "Mauretanien"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Du har nu mulighed for at hente opdaterede pakker som er blevet opdateret\n"
-"efter distributionen blev gjort tilg鎛gelig.\n"
+"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
+"en DHCP-server op; i s tilf鎙de kontroll閞 da gerne at jeg har l鎠t det "
+"netv鎟k du bruger til dit lokalnet korrekt; jeg vil ikke genkonfigurere det "
+"og jeg vil ikke r鴕e ved din konfiguration af DHCP-serveren.\n"
"\n"
-"Du vil f sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-"internet-opkobling for at forts鎡te.\n"
+"Den normale DNS-indgang er den cahcendde navneserver konfigureret p "
+"bransmuren. Du kan eksempelvis erstatte denne med din ISPs DNS-adresse.\n"
+"\n"
+"Ellers kan jeg genkonfigurere dit gr鎛sesnit og genkonfigurere en DHCP-"
+"server for dig.\n"
"\n"
-"豱sker du at installere opdateringerne?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inds鎡 Opdater moduler-disketten i drev %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inds鎡 opstartsdisketten i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
+"Ingen lokal printer fundet! For at installere en printer i h錸den skal du "
+"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
+"dev/lp1 ..., svarende til LPT1:, LPT2: ..., f鴕ste USB-printer: /dev/usb/"
+"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
+msgid "All primary partitions are used"
+msgstr "Alle prim鎟e partitioner er brugt"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annull閞.\n"
-"Hvis kun nogen cd'er mangler, frav鎙g dem, og klik s Ok."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Alt"
+"Derefter anbefaler vi at du genstarter dit X-milj for\n"
+"at undg problemer med det 鎛drede v鎟tsnavn"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installation (specielt ingen urpmi)"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Med basal dokumentation (anbefalet!)"
+msgid "Installation Server Configuration"
+msgstr "Konfiguration af installations-server"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr "Med X"
+msgid "Configuring IDE"
+msgstr "Konfigurerer IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt nogen gruppe af pakker.\n"
-"V鎙g den minimale installation du 鴑sker"
+msgid "Network functionality not configured"
+msgstr "Netv鎟ksfunktionalitet ikke konfigureret"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Type of install"
-msgstr "Installationstype"
+msgid "Configure module"
+msgstr "Konfigur閞 modul"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Valgt st鴕relse er st鴕re end tilg鎛gelig plads"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokos鴈rne"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Inds鎡 en diskette med pakkevalget"
+msgid "Disconnecting from the Internet "
+msgstr "Afbryd forbindelse til Internettet "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Indl鎠er fra diskette"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Du skal genstarte maskinen for at aktivere 鎛dringerne"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Package selection"
-msgstr "Valg af pakker"
+msgid "Provider phone number"
+msgstr "Udbyders telefonnummer"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Gem p diskette"
+msgid "Host %s"
+msgstr "V鎟t %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Indl鎠 fra diskette"
+msgid "Armenia"
+msgstr "Armenien"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"V鎙g indl鎠 eller gem pakkevalg p diskette.\n"
-"Formatet er det samme som for auto_install-genererede disketter."
+msgid "Fiji"
+msgstr "Fiji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Leder efter tilg鎛gelige pakker"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Leder efter pakker som skal opgraderes"
+"Argumenter: (l鎛gde, antalcifre=0, antalstore=0)\n"
+"\n"
+"S鎡 mindste l鎛gde for adgangskoder, mindste antal cifre og mindste antal "
+"store bogstaver "
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Leder efter pakker der allerede er installeret..."
+msgid "Second floppy drive"
+msgstr "Andet diskette-drev"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Leder efter tilg鎛gelige pakker og genopbygger rpm-database..."
+msgid "About Harddrake"
+msgstr "Om Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemf鴕e installationen, tilf鴍 mere"
+msgid "Drive capacity"
+msgstr "Kapacitet for drevet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Kontrol af filsystem %s mislykkedes. 豱sker du at reparere fejlene (bem鎟k, "
-"du kan miste data)"
+"Inds鎡 en diskette i diskettedrevet\n"
+"Alle data p disketten vil blive slettet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
+msgid "Size: %s"
+msgstr "St鴕relse: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "V鎙g partitioner der skal formateres"
+msgid "Control and Shift keys simultaneously"
+msgstr "Kontrol- og skiftetaster samtidigt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere 鎛dringerne i partitionstabellen"
+msgid "secondary"
+msgstr "sekund鎟"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil forts鎡te, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
+msgid "View Backup Configuration."
+msgstr "Se konfiguration af sikkerhedskopiering."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "V鎙g monterings-stierne"
+msgid "if set to yes, report check result to syslog."
+msgstr "hvis sat til ja, s rapport閞 kontrolresultat til syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
+msgid "No password"
+msgstr "Ingen adgangskode"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No partition available"
-msgstr "ingen ledige partitioner"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
+msgid "There is no existing partition to use"
+msgstr "Der er ingen eksisterende partition der kan bruges"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"De f鴏gende skannere\n"
+"\n"
+"%s\n"
+"er tilg鎛gelige p dit system.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"For at skrive til en TCP eller sokkel-printer skal du angive v鎟tsnavnet "
+"eller IP-adressen p printeren, og eventuelt portnummer (standard er 9100). "
+"P HP JetDirect-servere er portnummeret normalt 9100, p andre servere "
+"varierer det. Tjek manualen for dit udstyr."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Hard drive information"
+msgstr "Drev-information"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
+msgid "Russian"
+msgstr "Russisk"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
+msgid "Jordan"
+msgstr "Jordan"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
+msgid "Hide files"
+msgstr "Skjul filer"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "V鎙g hvilken seriel port din mus er forbundet til."
+msgid "Auto-detect printers connected to this machine"
+msgstr "Auto-opdagelse af printere tilsluttet denne maskine"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse Port"
-msgstr "Muse-port"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV er ikke installeret!\n"
+"\n"
+"\n"
+"Hvis du har et tv-kort, men DrakX hverken har fundet det (intet bttv\n"
+"eller saa7134 modul i \"/etc/modules\") eller installeret xawtv, s indsend "
+"venligst\n"
+"resultaterne af \"lspcidrake -v -f\" til \"install\\@mandrakesoft.com\"\n"
+"med emnet \"undetected TV card\".\n"
+"\n"
+"\n"
+"Du kan installere det ved at indtaste \"urpmi xawtv\" som root, p en "
+"kommandolinje."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "V鎙g muse-type."
+msgid "Sorry, no floppy drive available"
+msgstr "Der er desv鎟re ikke noget tilg鎛geligt diskette-drev"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Krypteringsn鴊le for %s"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Opgrad閞 %s"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Ops鎡 din Windows-server til at g鴕e printeren tilg鎛gelig under IPP-"
+"protokollen, og ops鎡 udskrift fra denne maskine med '%s'-opkoblingstypen i "
+"Printerdrake.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Er dette en nyinstallation eller en opgradering?"
+msgid "Bad package"
+msgstr "D錼lig pakke"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Install閞/Opgrad閞"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Lav din maskine om til en st鎟k server med bare nogen f klik med musen: "
+"Webserver, post, brandmur, ruter, fil- og print-server, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette liste over tilg鎛gelige tastaturer"
+msgid "DrakSec Basic Options"
+msgstr "Basale valgmuligheder for DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "V鎙g dit tastaturlayout."
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Bem鎟k: Hvis du har et ISA PnP lydkort skal du bruge programmet sndconfig. "
+"Du skal blot indtaste \"sndconfig\" i et konsol-program."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit"
-msgstr "Afslut"
+msgid "Romania"
+msgstr "Rum鎛ien"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "License agreement"
-msgstr "Licensaftale"
+msgid "choose device"
+msgstr "v鎙g enhed"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Der er opst錯t en fejl"
+msgid "Canada"
+msgstr "Canada"
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> mellem elementer | <Space> v鎙ger | <F12> n鎠te sk鎟m "
+msgid "Remove from LVM"
+msgstr "Fjern fra LVM"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
+msgid "Timezone"
+msgstr "Tidszone"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Intet tilg鎛geligt diskettedrev"
+msgid "German"
+msgstr "Tysk"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
+msgid "Next ->"
+msgstr "N鎠te ->"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbeh鎓tet.\n"
-"Tjek cdrom'en p en f鎟diginstalleret maskine ved brug af \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplik閞 monterings-sti %s"
+"Aktivering af dette vil muligg鴕e udskrift at rene tekstfiler p japansk. "
+"Brug kun denne funktion hvis du virkelig 鴑sker at udskrive tekst p "
+"japansk, hvis det er aktiveret kan du ikke l鎛gere udskrive bogstaver med "
+"accenter i latinske skrifttyper, og du vil ikke kunne tilpasse margenerne, "
+"tegnst鴕relse mv. Denne indstilling vedr鴕er kun printere defineret p denne "
+"maskine. Hvis du 鴑sker at udskrive japansk tekst p en printer der er sat "
+"op p en ekstern maskine, skal du aktivere denne funktion p denne eksterne "
+"maskine."
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan h錸dteres p en\n"
-"p鎛 m錮e.\n"
-"Forts鎡 p eget ansvar!"
+"\n"
+"Denne partition er nok\n"
+"en driver-partition. Du skal\n"
+"nok bare lade den v鎟e.\n"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Vent venligst"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Ok"
-msgstr "O.k."
+msgid "Horizontal refresh rate"
+msgstr "Vandret opdateringsfrekvens"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finish"
-msgstr "Afslut"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
+"loopback.\n"
+"Fjern loopback f鴕st"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Basic"
-msgstr "Basal"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Netv鎟ksops鎡ningen lavet under installationen kan ikke startes nu. Tjek om "
+"netv鎟ket bliver tilg鎛geligt efter opstart af dit system, og ret "
+"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netv鎟k og internet'/ "
+"'Forbindelse', og konfigur閞 derefter printeren ogs med Mandrake "
+"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avanceret"
+msgid "USB controllers"
+msgstr "USB-kontrolkort"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Fjern"
+msgid "What norm is your TV using?"
+msgstr "Hvilken standard bruger dit tv?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "苙dr"
+msgid "Type:"
+msgstr "Type:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Tilf鴍"
+msgid "Share name"
+msgstr "Dele-navn"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "V鎙g en fil"
+msgid "enable"
+msgstr "aktiv閞"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Her kan du v鎙ge tasten eller tastekombinationen som \n"
-"lader dig skifte mellem forskellige tastaturlayouter\n"
-"(dvs latinsk eller ikke-latinsk)."
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "H鴍re Windows-tast"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Venstre Windows-tast"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "'Menu'-tast"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift-taster samtidigt"
+"Kontakter Mandrake Linux netsted for at hente listen over tilg鎛gelige spejle"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- og alt-taster samtidigt"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Et problem opstod ved genstart af netv鎟ket: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock-tast"
+msgid "Remove the loopback file?"
+msgstr "Fjern loopback-filen?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol- og skiftetaster samtidigt"
+msgid "Selected size is larger than available space"
+msgstr "Valgt st鴕relse er st鴕re end tilg鎛gelig plads"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Begge taster samtidigt"
+msgid "NCP server name missing!"
+msgstr "NCP-servernavn mangler!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "H鴍re alt-tast"
+msgid "Please choose your country."
+msgstr "V鎙g dit land."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
+msgid "Hard Disk Backup files..."
+msgstr "Sikkerhedskopifiler for disk..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talr鎘ke\" QWERTY"
+msgid "Laotian"
+msgstr "Laotisk"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Amerikansk"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokollen tillader brugere p et netv鎟k at hente systeminformation "
+"fra enhver maskine p dette netv鎟k."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Britisk"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Regenererer liste af konfigurerede skannere ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrainsk"
+msgid "Scanner"
+msgstr "Skanner"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr ""
+"Advarsel: afpr鴙ning af dette grafikkort kan f din maskine til at fryse"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Brugernavnet m kun indeholde sm bogstaver, tal, `-' og `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik tastatur"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thailandsk"
+msgid "Welcome To Crackers"
+msgstr "Velkommen til Crackere"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (skrivemaskine-layout)"
+msgid "Module options:"
+msgstr "Modulindstillinger:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (ISCII-layout)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "G鴕 dine netv鎟k sikre med multinetv鎟ksbrandmur (MNF)"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
+msgid "Go on without configuring the network"
+msgstr "Forts鎡 med konfigurering af netv鎟k"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
+msgid "Abort"
+msgstr "Afbryd"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Ingen foresp鴕gsel om adgangskode p %s ved port %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovensk"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Mark閞 om du vil bruge den ikke-tilbagespolende enhed."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Svensk"
+msgid "Usage of remote scanners"
+msgstr "Brug skannere"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-cdrom.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Russisk"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "Din Windows partition er for fragmenteret, k鴕 'defrag' f鴕st"
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (norsk)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Fremdrift for sikkerhedskopiering af disk..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Qu閎ec)"
+msgid "Unable to fork: %s"
+msgstr "Kan ikke fork(): %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugisisk"
+msgid "Type: "
+msgstr "Type: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
+msgid "<-- Edit Client"
+msgstr "<-- Redig閞 klient"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
+msgid "no fonts found"
+msgstr "kunne ikke finde nogen skrifttyper"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norsk"
+msgid "Mouse"
+msgstr "Mus"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Hollandsk"
+msgid "not enough room in /boot"
+msgstr "Ikke nok plads i /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltesisk (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "V鎙ger en vilk錼lig driver"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltesisk (UK)"
+msgid "Host name"
+msgstr "V鎟tsnavn"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolsk (kyrillisk)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmesisk)"
+msgid "the color of the progress bar"
+msgstr "farven p forl鴅slinjen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonisk"
+msgid "Suppress Fonts Files"
+msgstr "Undertryk skrifttypefiler"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Tilf鴍 til RAID"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Lettisk"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Du kan tilf鴍e flere valgmuligheder i Yaboot, til andre styresystemer, andre "
+"kerner, eller til n鴇-opstart.\n"
+"\n"
+"For andre styresystemer best錼 indgangen blot af et navn og rodpartitionen\n"
+"\n"
+"Der er for Linux nogen f valgmuligheder:\n"
+"\n"
+" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
+"fra Yaboot for at v鎙ge denne opstartsmulighed.\n"
+"\n"
+" * Image: Dette er navnet p den kerne der skal opstartes. Typisk vmlinux "
+"eller en variation p vmlinux med en endelse.\n"
+"\n"
+" * Root: root enheden eller \"/\" for din Linux installation.\n"
+"\n"
+" * Append: p Apple udstyr bruges kerne-append muligheden ofte til at hj鎙pe "
+"med initialisering af billedudstyr, eller til at aktivere emulering af "
+"museknapper for de manglende knap-2 og knap-3 p musen p en typisk Apple "
+"mus. Det f鴏gende er nogle eksempler:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: denne mulighed kan bruges enten til at indl鎠e de f鴕ste moduler, "
+"f鴕 opstartsenheden er tilg鎛gelig, eller til at indl鎠e en ramdisk ved "
+"opstart i en n鴇situation.\n"
+"\n"
+" * Initrd-size: den almindelige st鴕relse p en ramdisk er generelt 4.096 "
+"kbyte. Hvis du har brug for at udl鎔ge en stor ramdisk kan denne mulighed "
+"bruges til at angive en ramdisk st鴕re end standarden.\n"
+"\n"
+" * Read-write: normalt bliver rod-partitionen f鴕st monteret skrivebeskyttet "
+"for at muligg鴕e et filsystemstjek f鴕 systemet g錼 i luften. Du kan "
+"tilsides鎡te denne standard med denne valgmulighed.\n"
+"\n"
+" * NoVideo: skulle Apple-billedudstyret vise sig at v鎟e specielt "
+"problemfyldt kan du v鎙ge denne mulighed for at starte op i 'novideo'-"
+"tilstand, med indbygget rammebufferunderst鴗telse.\n"
+"\n"
+" * Default: v鎙ger denne indgang som v鎟ende det normale Linux valg, som "
+"v鎙ges ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil ogs "
+"blive fremh鎣et med en '*', hvis du trykker Tab for at se opstartsvalgene."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Printeren \"%s\" blev tilf鴍et til Star Office/OpenOffice.org/GIMP.org."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talr鎘ke\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Intet tilg鎛geligt diskettedrev!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Hvilke muligheder der er for den aktuelle printer kan du enten l鎠e p "
+"listen vist nedenfor, eller klikke p knappen 'Liste med printermuligheder'.%"
+"s%s%s\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
+msgid "Continue anyway?"
+msgstr "Forts鎡 alligevel?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laotisk"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Hvis din printer ikke er listet, s v鎙g en kompatibel (se printermanual) "
+"eller en lignende printer."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinamerikansk"
+msgid "Printer"
+msgstr "Printer"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
+msgid "Saudi Arabia"
+msgstr "Saudi-Arabien"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Nogen enheder blev tilf鴍et:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italiensk"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandsk"
+msgid "Printing on the printer \"%s\""
+msgstr "Udskriver p printeren '%s'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iransk"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke 鎛dret"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Fonetisk)"
+msgid "Restore From Tape"
+msgstr "Genskab fra b錸d"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israelsk"
+msgid "Choose the profile to configure"
+msgstr "V鎙g profilen der skal konfigureres"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Kroatisk"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Indtast et Zeroconf-v鎟tsnavn uden noget punktum hvis du ikke 鴑sker at "
+"bruge det forvalgte v鎟tsnavn."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ungarsk"
+msgid "Backup Now from configuration file"
+msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Monteringspunkter b鴕 kun indeholde bogstaver og tal"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Genstarter printsystemet ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Gr鎠k"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumenter: (navn)\n"
+"\n"
+"Tilf鴍 navn som en undtagelse for h錸dteringen af adgangskodefor鎙delse af "
+"msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
+msgid "See hardware info"
+msgstr "Se info for maskinel"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
+msgid "First sector of boot partition"
+msgstr "F鴕ste sektor af opstartspartition"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Fransk"
+msgid "Printer manufacturer, model"
+msgstr "Printerproducent, model"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finsk"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spansk"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Mandrake TerminalServer konfigureringsprogram\n"
+"--enable : aktiv閞 MTS\n"
+"--disable : deaktiv閞 MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : tilf鴍 en eksisterende systembruger til MTS (kr鎣er "
+"brugernavn)\n"
+"--deluser : slet en eksisterende systembruger fa MTS (kr鎣er "
+"brugernavn)\n"
+"--addclient : tilf鴍 en klientmaskine til MTS (kr鎣er MAC-adresse, IP, "
+"nbi aftryksnavn)\n"
+"--delclient : tilf鴍 en klientmaskine til MTS (kr鎣er MAC-adresse, IP, "
+"nbi aftryksnavn)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estisk"
+msgid "Subnet Mask:"
+msgstr "Undernetmaske:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (svensk)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Problemfri installation af temaer for LiLo- og opstartssk鎟m"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norsk)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
+"gange (per sekund) hele sk鎟mbilledet bliver genopfrisket, og (vigtigst af "
+"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
+"kan tegnes p sk鎟men hvert sekund.\n"
+"\n"
+"Det er MEGET VIGTIGT at du ikke angiver en sk鎟mtype med "
+"opdateringsfrekvenser, der er st鴕re end din sk鎟ms form錯n: du risikerer at "
+"鴇el鎔ge din sk鎟m.\n"
+"Hvis du er i tvivl, b鴕 du v鎙ge en ops鎡ning, som du med SIKKERHED ved\n"
+"at din sk鎟m kan klare."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "苙dr"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dansk"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"'%s'- og '%s'-kommandoerne tillader ogs 鎛dring af indstillingsmulighederne "
+"for et bestemt udskriftsjob. Tilf鴍 blot de 鴑skede indstillinger til "
+"kommandolinjen, fx '%s <fil>'.\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr "Beh鴙er v鎟tsnavn, brugernavn og adgangskode!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen d鴇e taster)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV er en protokol som lader dig montere en webserver katalog lokalt\n"
+"og behandle det som et lokalt filsystem (givet at webserveren er "
+"konfigureret\n"
+"som en WebDAV-server). Hvis du 鴑sker at tilf鴍e WebDAV-monteringspunkter,\n"
+"s v鎙g \"Ny\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Tysk"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
+msgid "new"
+msgstr "ny"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Vil du gerne pr鴙e igen?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
+msgid "Wizard"
+msgstr "Vejleder"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
+msgid "Edit selected server"
+msgstr "Redig閞 valgte server"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Hviderussisk"
+msgid "Please choose where you want to backup"
+msgstr "V鎙g hvor du 鴑sker at sikkerhedskopiere"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnisk"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Du skal genstarte for at aktivere 鎛dringerne i partitionstabellen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Medtag ikke cache for netl鎠er"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "V鎙g tastaturlayout."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (fonetisk)"
+msgid "Standard"
+msgstr "Standard"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengali"
+msgid "Please choose your mouse type."
+msgstr "V鎙g muse-type."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgisk"
+msgid "Connect..."
+msgstr "Tilslut..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Kunne ikke konfigurere printer '%s'!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabisk"
+msgid "not configured"
+msgstr "ikke konfigureret"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
+msgid "About"
+msgstr "Om"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
+msgid "Proxies configuration"
+msgstr "Konfiguration af mellemv鎟t (proxy)"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albansk"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polsk"
+msgid "Start: sector %s\n"
+msgstr "Start: sektor %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Netv鎟ksgr鎛sesnit allerede konfigureret"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Kunne ikke f adgang til disketten!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "Opkobler til vejleder for Bugzilla"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Sydafrika"
+msgid "Mail Server"
+msgstr "Postserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbien"
+msgid "Please click on a partition"
+msgstr "Klik p en partition"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "Hav det godt!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "over netv鎟k"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis og Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Opgrad閞 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "V鎙g printer-forbindelse"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jomfru鴈rne (USA)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Skanning for tv-kanaler i gang..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jomfru鴈rne (britiske)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Fejl ved sending af fil via FTP.\n"
+" Ret venligst din FTP-konfiguration."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "Start p IP-omr錮e:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Sankt Vincent og Grenadinerne"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver-d鎚onen (kaldet inetd) starter forskellige internet-"
+"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
+"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
+"den er ansvarlig for."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikansk"
+msgid "the height of the progress bar"
+msgstr "h鴍den p forl鴅slinjen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Gem via %s p v鎟t: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Fjerne, mindre 鴈r, USA"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+" Accept閞/afvis rundkastet icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Server for dom鎛enavne (DNS)"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
+msgid "Security Level:"
+msgstr "Sikkerhedsniveau:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "Mount points must begin with a leading /"
+msgstr "Monteringsstier skal begynde med /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "Postfix postserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Afslut uden at gemme"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad og Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Tyrkiet"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Produktet findes tilg鎛geligt p MandrakeStores netsted."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Indtast den maksimale st鴕relse\n"
+" tilladt for Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunesien"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Der er mange ting at v鎙ge imellem (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Hard drive detection"
+msgstr "Harddisk bestemmelse"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "豷ttimor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Du har ikke valgt nogen gruppe af pakker.\n"
+"V鎙g den minimale installation du 鴑sker"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Indtast LRL for WebDAV-serveren"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tadzjikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Thailand"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Franske sydlige territorier"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Tchad"
+msgid "Accept"
+msgstr "Accept閞"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks- og Caicos鴈rne"
+msgid "Description"
+msgstr "Beskrivelse"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Error opening %s for writing: %s"
+msgstr "Fejl ved 錬ning af %s for skrivning: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syrien"
+msgid "Mouse type: %s\n"
+msgstr "Muse-type: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Dit kort kan have 3D hardware accelerations-underst鴗telse med XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "S鉶 Tom og Pr韓cipe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "V鎙g cd/dvd-mediast鴕relse"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+" Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
+"enhver bruger."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Expert Area"
+msgstr "Ekspertomr錮e"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "V鎙g en sk鎟mtype"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "Tom m鎟kat er ikke tilladt"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Maltesisk (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakiet"
+msgid "I can't add any more partition"
+msgstr "Kan ikke tilf鴍e flere partitioner"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard og Jan Mayen 鴈rne"
+msgid "Size in MB: "
+msgstr "St鴕relse i Mb: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenien"
+msgid "Remote printer"
+msgstr "Ekstern printer"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sankt Helena"
+msgid "Please choose a language to use."
+msgstr "V鎙g det sprog, der skal bruges."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapore"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
+"forbindelse til Internettet.\n"
+"Ved kun at trykke p OK beholder du den nuv鎟ende konfiguration.\n"
+"苙dringer i felterne nedenunder vil overskrive denne konfiguration."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Jeg kan s鎡te din maskine op til automatisk at logge en bestemt bruger p."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychellerne"
+msgid "Floppy format"
+msgstr "Disketteformat"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Salomon鴈rne"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi-Arabien"
+msgid "Generic Printers"
+msgstr "Generelle printere"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Angiv hvilken printer som udskriftsopgaverne skal g til eller indtast et "
+"enhedsnavn/filnavn p inddatalinjen"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusland"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Skannerne p denne maskine er tilg鎛gelige for andre maskiner"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rum鎛ien"
+msgid "First sector of the root partition"
+msgstr "F鴕ste sektor af rodpartitionen"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "R閡nion"
+msgid "Alternative drivers"
+msgstr "Alternative drivprogrammer"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Mark閞 alle muligheder som du beh鴙er.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Kap Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Om denne processor har Cyrix 6x86 Coma-fejlen eller ej"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Pal鎠tina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Tidlige pentiummer var fejlbeh鎓tede og fr鴖 vwd afkodning af bytekoden F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
+"filnavn p inddatalinjen"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sankt Pierre og Miquelon"
+msgid "/Options/Test"
+msgstr "/Indstillinger/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polen"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Dette niveau skal bruges med omtanke. Det g鴕 dit system nemmere at bruge, "
+"men er meget s錼bart: det m ikke bruges til en maskine der er i et netv鎟k "
+"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
+"adgangskoder."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Mounting partition %s"
+msgstr "Monterer partition %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filippinerne"
+msgid "User name"
+msgstr "Brugernavn"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Ny Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Ny konfiguration (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Fransk Polynesien"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Hvilken partition vil du benytte som Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Lav sikkerhedskopi af system"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Testsider"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "New Zealand"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Liste over data som skal genskabes:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Tjekker %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Sokkel-printer-parametre"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Kort mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Frankrig"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "bladr"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk 豦n"
+msgid "Checking installed software..."
+msgstr "Tjekker installeret programmel..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Det eksterne v鎟tsnavn mangler!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Ny Caledonien"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Vil du aktivere udskrift p printerne i det lokale netv鎟k?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Turkey"
+msgstr "Tyrkiet"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mocambique"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid "Number of buttons"
+msgstr "Antal knapper"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mexico"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamesisk \"talr鎘ke\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Modul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldiverne"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Desuden kan k鴈r lavet med dette program eller \"foomatic -configure\" ikke "
+"overflyttes."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Udstyr"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl- og alt-taster samtidigt"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "U.S.A."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauretanien"
+msgid "Default OS?"
+msgstr "Forvalgt styresystem?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "Schweizisk (Tysk layout)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Nordmarianerne"
+msgid "Configure all heads independently"
+msgstr "Konfigur閞 alle sk鎟me uafh鎛gigt"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongoliet"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"V鎙g den printer du 鴑sker at ops鎡te. Konfigurationen af printeren vil ske "
+"fuldst鎛digt automatisk. Hvis din printer ikke blev fundet korrekt eller "
+"hvis du foretr鎘ker en tilpasset printerkonfiguration, s sl 'Manuel "
+"konfiguration' til."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP-server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Indl鎠/gem p diskette"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonien"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Dette tema har endnu ikke nogen startsk鎟m i %s!"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall鴈rne"
+msgid "nice"
+msgstr "rart"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "Forsvinder om %d sekunder"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Angiv hvilken seriel port dit modem er forbundet til."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Country"
+msgstr "Land"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Marokko"
+msgid "Property"
+msgstr "Egenskab"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libyen"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Letland"
+msgid "LAN Configuration"
+msgstr "LAN konfiguration"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Litauen"
+msgid "Path or Module required"
+msgstr "Sti eller modul kr鎣et"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Avancerede muligheder"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Coma bug"
+msgstr "Coma-fejl"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Nu skal du v鎙ge hvor Mandrake Linux skal installeres. Hvis partitionerne "
+"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
+"med et andet partitioneringsv鎟kt鴍), kan du bruge dem. Ellers skal disk-"
+"partitionerne laves f鴕st.\n"
+"\n"
+"For at lave partitioner skal du f鴕st v鎙ge en harddisk. Du kan v鎙ge disken "
+"der skal partitioneres ved at trykke p \"hda\" for den f鴕ste IDE disk, "
+"\"hdb\" for den anden eller \"sda\" for den f鴕ste SCSI disk og s videre.\n"
+"\n"
+"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
+"\n"
+" * '%s': Dette valg sletter alle partitioner p den valgte disk.\n"
+"\n"
+" * '%s': dette valg tillader dig automatisk at lave Ext3 og swappartitioner "
+"p den fri plads p din disk.\n"
+"\n"
+"* '%s': giver adgang til flere faciliteter:\n"
+"\n"
+" * '%s': Gemmer din partitionstabel p en diskette. Nyttigt ved senere "
+"redning af partitionstabellen, om n鴇vendigt. Det anbefales meget at du "
+"bruger dette trin.\n"
+"\n"
+" * '%s': lader dig genskabe en tidligere gemt partitionstabel fra "
+"diskette.\n"
+"\n"
+" * '%s': hvis din partitionstabel er beskadiget, kan du pr鴙e at redde "
+"den med denne mulighed. V鎟 forsigtig og husk at det ikke altid virker.\n"
+"\n"
+" * '%s': forkaster alle 鎛dringer og genindl鎠er partitionstabellen som "
+"oprindeligt l p disken\n"
+"\n"
+" * '%s': fravalg af denne mulighed vil tvinge brugere til at manuelt "
+"montere og afmontere media s錽om disketter og cdrommer\n"
+"\n"
+" * '%s': Hvis du 鴑sker at bruge vejlederen til at partitionere din disk, "
+"kan du bruge denne mulighed. Dette anbefales, hvis du ikke har den store "
+"forst錯lse om partitionering\n"
+"\n"
+" * '%s': Du kan bruge denne mulighed for at annullere dine 鎛dringer\n"
+"\n"
+" * '%s': giver mulighed for flere handlinger med partitioner (type, "
+"valgmuligheder, format) og giver mere information om diskdrevet\n"
+"\n"
+" * '%s': n錼 du er f鎟dig med partitionering af din disk, dette vil skrive "
+"鎛dringerne tilbage p disken.\n"
+"\n"
+"Ved definering af en partitionsst鴕relse kan du finjustere denne ved at "
+"bruge piletasterne p tastaturet.\n"
+"\n"
+"Bem鎟k: du kan n enhver valgmulighed ved brug af tastaturet: navig閞 gennem "
+"partitionerne med Tab og op- og ned-pilene.\n"
+"\n"
+"N錼 en partition er valgt kan du bruge:\n"
+"\n"
+" * Ctrl-c for at lave en ny partition (N錼 en tom partition er valgt)\n"
+"\n"
+" * Ctrl-d for at slette en partition\n"
+"\n"
+" * Ctrl-m for at s鎡te et monteringssti\n"
+"\n"
+"For at f information om de forskellige tilg鎛gelige filsystemstyper kan du "
+"l鎠e kapitlet ext2fs i 'Referencemanualen'.\n"
+"\n"
+"Hvis du er i gang med at installere p en PPC-maskine skal du lave en lille "
+"HFS-'bootstrap'-partition p mindst 1MB til Yaboot-systemstarteren. Hvis du "
+"v鎙ger at lave partitionen en smule st鴕re, f.eks. 50MB kan den v鎟e nyttig "
+"til at gemme en ekstra kerne og ramdisk-billede for n鴇situationer ved "
+"opstart."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"grafikkortet installeret p din maskine. Hvis dette ikke er tilf鎙det kan du "
+"fra denne liste v鎙ge det kort du faktisk har installeret.\n"
+" I tilf鎙de af at forskellige drivere er tilg鎛gelige til dit kort, med "
+"eller uden 3D-accelleration, bliver du spurgt om at v鎙ge den server der "
+"bedst opfylder dine behov."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Sankt Lucia"
+msgid "There was an error installing packages:"
+msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjet konfiguration"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Lagos"
+msgid "Undo"
+msgstr "Fortryd"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Save partition table"
+msgstr "Gem partitionstabel"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman鴈rne"
+msgid "Finnish"
+msgstr "Finsk"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Macedonia"
+msgstr "Makedonien"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Deling per bruger bruger gruppen 'fileshare'. \n"
+"Du kan bruge userdrake til at tilf鴍e en bruger til denne gruppe."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Nord)"
+msgid "Slovenian"
+msgstr "Slovensk"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts og Nevis"
+msgid "Libya"
+msgstr "Libyen"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comorerne"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Br鎛d p CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodja"
+msgid "Table"
+msgstr "Tabel"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgisistan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ved ikke hvordan man formaterer %s som type %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Model"
+msgstr "Model"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Aktiv閞/deaktiv閞 libsafe hvis libsafe findes p systemet."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordan"
+msgid "Stop Server"
+msgstr "Stop server"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"V鎙g et tema for\n"
+"Lilo og opstartsk鎟men,\n"
+"du kan v鎙ge\n"
+"dem separat"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumenter: (arg, listen_tcp=None)\n"
+"\n"
+"Tillad/forbyd X-forbindelser. F鴕ste argangiver hvad der g鴕es\n"
+"p klientsiden: ALL (alle forbindelser er tilladt), LOCAL (kun\n"
+"lokale forbidelser) og NONE (ingen forbindelser)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
+msgid "Use auto detection"
+msgstr "Brug automatisk detektion"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Indien"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM tilf鴍er muse-support til tekst-baserede Linux applikationer s錽om "
+"Midnight Commander. Den tillader muse-baseret kopi閞-og-s鎡ind operationer "
+"p konsollen og inkluderer support for pop-op-menuer i konsollen."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Started on boot"
+msgstr "Startede med opstart"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irland"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Slut dig til MandrakeSofts supporthold og Linux-samfundet p nettet for at "
+"dele din viden og hj鎙pe andre ved at blive en anerkendt Ekspert p det "
+"tekniske supportnetsted:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesien"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"De f鴏gende tilvalg kan s鎡tes for at tilpasse din\n"
+"systemsikkerhed. Hvis du har brug for forklaringer kan du kigge p "
+"Hj鎙petipsene.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Ungarn"
+msgid "Automatically find available printers on remote machines"
+msgstr "Find tilg鎛gelige printere p eksterne maskiner automatisk"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Gem p b錸d p enhed: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatien"
+msgid "East Timor"
+msgstr "豷ttimor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Slet profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard- og McDonald-鴈rne"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Tillad/forbyd listen af brugere p systemet p sk鎟mh錸dteringer (kdm og "
+"gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Installerer Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Kina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Log ud og tryk herefter p Ctrl-Alt-Bak"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "Detekteret"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Netv鎟ket skal v鎟e genstartet. 豱sker du at genstarte det?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Pakke: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Kan ikke skrive /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Syd-Georgia og Syd-Sandwich-鴈rne"
+msgid "SECURITY WARNING!"
+msgstr "SIKKERHEDSADVARSEL!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "苉vatorialguinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Nej, jeg 鴑sker ikke automatisk login"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Migrationsv鎟kt鴍 for MS Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "Alle sprog"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Gr鴑land"
+msgid "Removing %s"
+msgstr "Fjerner %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Tester din forbindelse..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "St鴕relse p cachen"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Fransk Guinea"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Kontrol af adgangskode er nu aktiveret, men brug som netv鎟ksmaskine er "
+"stadig ikke anbefalet."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgien"
+msgid "Start sector: "
+msgstr "Startsektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Storbritannien"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Pakken %s skal v鎟e installeret. 豱sker du at installere den?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychellerne"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "F鎟鴈rne"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
+"printeren med modellerne listet i dens printerdatabase for at finde den "
+"bedste match. Dette valg kan v鎟e forkert, is鎟 n錼 din printer slet ikke er "
+"listet i databasen. S tjek om valget er korrekt og klik \"Modellen er "
+"korrekt\" hvis den er, og hvis ikke s klik \"V鎙g model manuelt\" s du kan "
+"udv鎙ge din printermodel manuelt p den n鎠te sk鎟m.\n"
+"\n"
+"Som din printer har Printerdrake fundet:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronesien"
+msgid "Bad password on %s"
+msgstr "D錼lig adgangskode p %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklands鴈rne (Malvinas)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Der findes en ukendt printer direkte tilsluttet til dit system"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finland"
+msgid "Security Administrator (login or email)"
+msgstr "Sikkerhedsadministrator (brugernavne eller e-post)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopien"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Desv鎟re, vi underst鴗ter kun 2.4-kerner."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Spanien"
+msgid "Romanian (qwerty)"
+msgstr "Russisk (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "Under udvikling ... vent venligst:-)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Vestlig Sahara"
+msgid "Czech Republic"
+msgstr "Tjekkiet"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egypten"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estland"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Algeriet"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanske Republik"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danmark"
+msgid "Old configuration (isdn4net)"
+msgstr "Gammel konfiguration (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Sound card"
+msgstr "Lydkort"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Cypern"
+msgid "Import Fonts"
+msgstr "Import af skrifttyper"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Jule鴈rne"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Du har 閚 stor MicroSoft Windows partition.\n"
+"Jeg foresl錼 at du f鴕st 鎛drer st鴕relsen p partitionen\n"
+"(klik p den, og klik herefter p \"St鴕relses鎛dring\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
+msgid "Suppress Temporary Files"
+msgstr "Undertryk midlertidige filer"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Change partition type"
+msgstr "Skift partitionstype"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Columbia"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Opl鴖ning\n"
+"\n"
+" H閞 kan du v鎙ge opl鴖ninger og farvedybder ud af de tilg鎛gelige "
+"muligheder for dit udstyr. V鎙g dem som bedst opfylder dine behov (du vil "
+"dog kunne 鎛dre dette efter installationen). Et eksempel p den valgte "
+"konfiguration vil blive vist p sk鎟men."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Cameroun"
+msgid "Network Options"
+msgstr "Netv鎟kstilvalg"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Visningstema\n"
+"under konsol"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cooks 鴈r"
+msgid "Statistics"
+msgstr "Statistik"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Elfenbenskysten"
+msgid "(on %s)"
+msgstr "(p %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Schweiz"
+msgid "MM Series"
+msgstr "MM Serien"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Et bibliotek som beskytter mod angreb via bufferoverl鴅 og formatstrenge."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centralafrikanske Republik"
+msgid "average"
+msgstr "gennemsnit"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Nyt printernavn"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos鴈rne"
+msgid "Equatorial Guinea"
+msgstr "苉vatorialguinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Canada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Tillad/forbyd autologind."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Opbyg sikkerhedskopien"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Hviderusland"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
+"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Der er for n鎟v鎟ende ingen alternative muligheder"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet-鴈n"
+msgid "Romanian (qwertz)"
+msgstr "Russisk (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Write Config"
+msgstr "Udskriv konfiguration"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed d鎚onen giver mulighed for automatisk IP rutetabel opdatering via RIP "
+"protokollen. RIP kan bruges til sm netv鎟k, men n錼 det kommer til mere "
+"komplekse netv鎟k er der behov for en mere kompleks protokol."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasilien"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Tillad/forbyd ekstern root-logind."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
+msgid "Browse"
+msgstr "Bladr"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "cd-rom"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "豱sker du at fors鴊e at skabe forbindelse til Internettet nu?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgisk"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid "Do you have an ISA sound card?"
+msgstr "Har du et ISA-lydkort?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarien"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Der blev ikke fundet nogen ethernet netv鎟ksadapter p dit system.\n"
+"Kan ikke s鎡te denne forbindelsetype op."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "Kan ikke lave 鴍ebliksbilleder f鴕 partitionering"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "V鎟tsnavn"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnien-Hercegovina"
+msgid "/File/Save _As"
+msgstr "/Fil/Gem _som"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbajdsjan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"For at f adgang til eksterne CUPS-servere i dit lokale netv鎟k beh鴙er du "
+"bare at aktivere \"Find automatisk tilg鎛gelige printere p eksterne maskiner"
+"\"-valget: CUPS-serverene informerer din maskine automatisk om printerne. "
+"Alle printerne som for 鴍eblikket er kendt af din maskine er listet i "
+"\"Fjern-printere\" sektionen i hovedvinduet til Printerdrake. Hvis din CUPS-"
+"server ikke er i dit lokale netv鎟k, m du indtaste CUPS-servernes IP-"
+"adresser og evt. portnummeret for at f printer-information fra serverne."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s findes ikke skannerdatabasen, skal den konfigureres manuelt?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australien"
+msgid "Delay before booting default image"
+msgstr "Ventetid f鴕 opstart af forvalgt styresystem"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerikansk Samoa"
+msgid "Restrict command line options"
+msgstr "Begr鎛s kommandolinie-indstillinger"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "豷teuropa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
+msgid "Use free space"
+msgstr "Brug fri plads"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "brug dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Hollandske Antiller"
+msgid "Mail alert"
+msgstr "Post-p錷indelse"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenien"
+msgid "Internet configuration"
+msgstr "Internet-konfiguration"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albanien"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Fandt %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua og Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Auto-detekt閞 printere"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Forenede Arabiske Emirater"
+msgid "Finish"
+msgstr "Afslut"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Vis automatisk valgte pakker"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flag rapporteret af kernen"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkul鎟e monteringer %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver f鴕st\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA-underst鴗telse eksisterer ikke l鎛gere for 2.2-kerner. Brug en 2.4-"
-"kerne."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT P HJULET!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Test musen"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Ingen mus"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Noget gik galt! - er mkisofs installeret?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "ingenting"
+msgid "16 MB"
+msgstr "16 Mb"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 knapper"
+msgid "Please try again"
+msgstr "Pr鴙 igen"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 knapper"
+msgid "The model is correct"
+msgstr "Modellen er korrekt"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 knap"
+msgid "FAT resizing failed: %s"
+msgstr "FAT st鴕relses鎛dring mislykkedes: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "Busmus"
+msgid "Individual package selection"
+msgstr "Individuelt pakkevalg"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
+msgid "This partition is not resizeable"
+msgstr "St鴕relsen p denne partition kan ikke 鎛dres"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
+msgid "Location"
+msgstr "Placering"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (kabel-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Serien"
+msgid "Journalised FS"
+msgstr "Journaliserende FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Denne maskine"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-drevbogstav: %s (bare et g鎡)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "V鎙g filerne eller katalogerne og klik p 'Tilf鴍'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "undg scsi-moduler"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Processorens familie (fx 6 for i686-klasse)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Da du er i gang med en netv鎟ksinstallation er dit netv鎟k allerede "
+"konfigureret.\n"
+"Klik OK for at beholde din konfiguration, eller annull閞 for at "
+"omkonfigurere din Internet- og netv鎟ksforbindelse.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "seriel"
+msgid "Keyboard layout: %s\n"
+msgstr "Tastatur-type: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Her kan du v鎙ge om printerne sluttet til denne maskine skal v鎟e "
+"tilg鎛gelige fra eksterne maskiner, og fra hvilke eksterne maskiner."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Hjul"
+msgid "Maltese (US)"
+msgstr "Maltesisk (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Standard"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Monterer og afmonterer alle netv鎟ks filsystemer (NFS), SMB (LanManager/"
+"Windows) og NCP (NetWare) monterings-stier"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV-kort"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Toggle between normal/expert mode"
+msgstr "Skift mellem normal og ekspert-tilstand"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
+msgid "Size"
+msgstr "St鴕relse"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "GRUB"
+msgstr "GRUB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "Greenland"
+msgstr "Gr鴑land"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sammenfold tr"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Udvid tr"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Ikke korrekt b錸detiket. B錸det har etiket %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste l鴖ning er at flytte dine prim鎟e partitioner, s錶edes at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke underst鴗tet p denne platform"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "m錽ke"
+"Indstilling af deling af internetforbindelse er allerede gjort.\n"
+"Deling er aktiveret.\n"
+"\n"
+"Hvad 鴑sker du at g鴕e?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "rart"
+msgid "Delete All NBIs"
+msgstr "Slet alle NBI'er"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "very nice"
-msgstr "meget rart"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Denne dialog giver dig mulighed for at finindstille din opstartsindl鎠er:\n"
+"\n"
+" * '%s': der er tre muligheder for din opstartsindl鎠er:\n"
+"\n"
+" * '%s': hvis du foretr鎘ker GRUB (tekstmenu).\n"
+"\n"
+" * '%s': hvis du foretr鎘ker LILO med tekstgr鎛seflade.\n"
+"\n"
+" * '%s': hvis du foretr鎘ker LILO med grafikgr鎛seflade.\n"
+"\n"
+" * '%s': I de fleste tilf鎙de vil det ikke v鎟e n鴇vendigt at 鎛dre standard "
+"('%s'), men hvis du foretr鎘ker det, kan opstartsindl鎠eren installeres p "
+"det andet diskdrev ('%s'), eller endda p en diskette ('%s').\n"
+"\n"
+" * '%s': Efter opstart eller genstart af maskinen er dette den tid der gives "
+"til brugeren p konsollen til at v鎙ge en anden opstartsindgang end den "
+"forvalgte.\n"
+"\n"
+"V鎟 opm鎟ksom p at hvis du v鎙ger ikke at installere en opstartsindl鎠er "
+"(ved at v鎙ge '%s'), skal du v鎟e sikker p at du har en anden m錮e at "
+"starte dit Mandrake Linux-system op p! V鎟 sikker p hvad du g鴕 hvis du "
+"鎛drer nogen af tilvalgene her!\n"
+"\n"
+"Et klik p '%s'-knappen i denne dialog vil tilbyde avancerede muligheder "
+"beregnet til ekspertbrugeren."
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "vigtigt"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"hvis sat, s send postrapporter til denne postadresse, ellers send dem til "
+"root."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "skal have"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Hvilken konfiguration af XFree 鴑sker du?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
+msgid "More"
+msgstr "Mere"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid fejlede"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Med dette sikkerhedsniveau kan brug som server komme p tale.\n"
+"Sikkerheden er nu h鴍 nok til at systemet kan bruges som server som tillader "
+"forbindelser fra mange klienter. Bem鎟k: hvis din maskine kun er en klient "
+"p internettet b鴕 du hellere v鎙ge et lavere niveau."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fejlede (m錽ke mangler raidtools?)"
+msgid "Account Password"
+msgstr "Adgangskode for konto"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke tilf鴍e en partition til _format閞et_ RAID md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Du besluttede at installere opstartsindl鎠eren p en partition.\n"
+"Dette indikerer at du allerede har en opstartsindl鎠er p disken som du "
+"starter op fra (fx System Commander).\n"
+"\n"
+"Hvilket drev starter du op fra?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "Stop"
+msgid "Tajik keyboard"
+msgstr "Tajik tastatur"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Du kan kopiere printerkonfigurationen du har sat op for k鴖erveren %s til %"
+"s, din nuv鎟ende k鴖erver. Al konfigurationsdata (printernavn, beskrivelse, "
+"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
+"opgaver.\n"
+"Ikke alle k鴈r kan overf鴕es p grund af:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "Ved opstart"
+msgid "Font List"
+msgstr "Liste over skrifttyper"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
+"Du beh鴙er m錽ke at 鎛dre din 舃en Firmware opstartsenhed for at sl "
+"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
+"s hold Command-Option-O-F nede og indtast:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Skriv s: shut-down\n"
+"Ved n鎠te opstart burde du se systemstarteren."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Tjenester og d鎚oner"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
+"opstartsindl鎠eren vil ikke virke for dig. Installationen vil forts鎡te, men "
+"du skal bruge BootX eller en anden m錮e til at starte din maskine."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "stoppet"
+msgid "Select file"
+msgstr "V鎙g fil"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "k鴕er"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"V鎙g netv鎟ket eller v鎟ten p hvilken de lokale printere skal g鴕es "
+"tilg鎛gelige: "
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "V鎙g hvilke tjenester der skal startes automatisk ved opstart"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Disse kommandoer kan du ogs bruge fra 'udskrivningskommando'-feltet i "
+"udskriftsdialogerne i mange programmer, men lad v鎟e med at angive filnavnet "
+"her, fordi filen der skal udskrives leveres af programmet.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Databaseserver"
+msgid "Japan"
+msgstr "Japan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Ekstern administration"
+msgid "Print option list"
+msgstr "Liste med printermuligheder"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "File sharing"
-msgstr "Fildeling"
+msgid "The change is done, but to be effective you must logout"
+msgstr "苙dringen er fortaget, men for at v鎟e effektiv skal du logge ud"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Search servers"
+msgstr "S鴊 efter servere"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "Printning"
+msgid "NCP queue name missing!"
+msgstr "NCP-k鴑avn mangler!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Starter X-font serveren (dette er obligatorisk for at XFree skal k鴕e)."
+"Advarsel, en anden internetforbindelse er blevet fundet, der m錽ke bruger "
+"dit netv鎟k"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Indl鎠 driverne for dine usb-enheder."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cdrom med etikette '%s'"
#: ../../services.pm:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Syslog er en facilitet som mange d鎚oner bruger til log beskeder\n"
-"Det er en god id altid at k鴕e syslog"
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet p din maskine"
+"Gemmer og henter systemets entropip鴏 for en h鴍re kvalitet\n"
+"ved generering af tilf鎙dige tal."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle "
-"brugere der er logget ind p en maskine, der k鴕er rwho d鎚onen (minder om "
-"finger)."
+"Kontrol af filsystem %s mislykkedes. 豱sker du at reparere fejlene (bem鎟k, "
+"du kan miste data)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere p et netv鎟k a identificere\n"
-"hvem der er logget p andre maskiner"
+msgid "Turn your computer into a reliable server"
+msgstr "G鴕 din maskine til en p錶idelig server"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere p et netv鎟k at hente systeminformation "
-"fra enhver maskine p dette netv鎟k."
+msgid " (driver %s)"
+msgstr " (drivprogram %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Routed d鎚onen giver mulighed for automatisk IP rutetabel opdatering via RIP "
-"protokollen. RIP kan bruges til sm netv鎟k, men n錼 det kommer til mere "
-"komplekse netv鎟k er der behov for en mere kompleks protokol."
+"Loopback-fil(er):\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Tilordn r enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle eller DVD-afspillere"
+msgid "I don't know"
+msgstr "Det ved jeg ikke"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter systemets entropip鴏 for en h鴍re kvalitet\n"
-"ved generering af tilf鎙dige tal."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP v鎟t \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der flytter "
-"post fra en maskine til en anden."
+"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
+"er lidt farlig, og m bruges med forsigtighed.\n"
+"\n"
+"Med denne mulighed vil du igen kunne k鴕e installationen du gennemf鴕te p "
+"denne maskine, med muligheden for at selv kunne 鎛dre p nogen af "
+"indstillingerne.\n"
+"\n"
+"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
+"gennemf鴕t automatisk, uanset hvad du valgte under installationen.\n"
+"\n"
+"豱sker du at forts鎡te?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Portmapper h錸dterer RPC tilslutninger, som bliver brugt af protokoller som "
-"NFS og NIS. Portmap serveren skal k鴕e p maskiner som bruger protokoller "
-"der udnytter RPC mekanismen"
+"\n"
+"\n"
+"Dit kort bruger i 鴍eblikket %s\"%s\"-driveren (normal driver for dit kort "
+"er \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA underst鴗telse er normalt til at underst鴗te ting som ethernet og "
-"modemer p b鎟bare. Den vil ikke blive startet medmindre den er "
-"konfigureret, s det er sikkert at have den installeret p maskiner der ikke "
-"har behov for den."
+msgid "Post Uninstall"
+msgstr "Efterbehandling for afinstallering"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "St鴗ter OKI 4w og kompatible winprintere."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
-"opstart."
+msgid "Cpuid level"
+msgstr "CPUid-niveau"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en popul鎟 protokol til fildeling over TCP/IP\n"
-"netv鎟k. Denne service giver NFS fill錽nings funktionalitet"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolsk (kyrillisk)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en popul鎟 protokol til fildeling over TCP/IP netv鎟k.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
-"exports filen"
+msgid "Add a module"
+msgstr "Tilf鴍 et modul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netv鎟ks-kort som er konfigureret\n"
-"til at starte ved opstart"
+msgid "Profile to delete:"
+msgstr "Profil der skal slettes:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netv鎟ks filsystemer (NFS), SMB (LanManager/"
-"Windows) og NCP (NetWare) monterings-stier"
+msgid "Local measure"
+msgstr "Lokal m錶ing"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en dom鎛e-navneserver (DNS) der bruges til opslag af IP-"
-"adresser for v鎟tsnavne."
+msgid "busmouse"
+msgstr "Busmus"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en server med h鴍 ydelse og\n"
-"tilg鎛gelighed."
+msgid "Account Login (user name)"
+msgstr "Konto-login (brugernavn)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-d鎚onen som er n鴇vendig for at lpr virker.\n"
-"Den er basalt en server der h錸dterer udskrifts-opgaver."
+msgid "Fdiv bug"
+msgstr "Fdiv-fejl"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Linuxconf vil nogen gange arrangere udf鴕else af forskellige opgaver ved "
-"opstart for at vedligeholde systemkonfigurationen."
+"konfigurering med drakfirewall\n"
+"\n"
+"Forsikr dig om at du har konfigureret din internetforbindelse med "
+"drakconnect f鴕 du g錼 videre."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indl鎠er den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
-"keyboard. Dette kan v鎙ges i kbdconfig programmet. Dette b鴕 v鎟e sl錯t til "
-"p de fleste maskiner."
+msgid "Path selection"
+msgstr "Valg af sti"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at ops鎡te en brandmur "
-"til at beskytte din maskine mod netv鎟ksangreb."
+msgid "Name/IP address of host:"
+msgstr "Navn eller IP-adresse p v鎟t:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "Sk鎟m: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Internet superserver-d鎚onen (kaldet inetd) starter forskellige internet-"
-"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
-"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
-"den er ansvarlig for."
+"Noget slemt sker p dit drev. \n"
+"En test for at tjekke integriteten af data er mislykkedes. \n"
+"Dette betyder at alt p disken vil ende som tilf鎙dige beskadigede data."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er en webserver. Den bruges til at betjene HTML-filer og CGI."
+msgid "Printer host name or IP missing!"
+msgstr "V鎟tsnavn eller IP-adresse p printer mangler!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake k鴕er en s鴊ning efter maskinel, og kan konfigurere nyt/鎛dret "
-"maskinel."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Mark閞 alle brugere som du vil have med i din sikkerhedskopi."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"GPM tilf鴍er muse-support til tekst-baserede Linux applikationer s錽om "
-"Midnight Commander. Den tillader muse-baseret kopi閞-og-s鎡ind operationer "
-"p konsollen og inkluderer support for pop-op-menuer i konsollen."
+"Denne %s skal v鎟e konfigureret af printerdrake.\n"
+"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der k鴕er bruger-specifikke programmer p "
-"planlagte tidspunkter. Vixie cron tilf鴍er en del forbedringer til den "
-"basale UNIX cron, inklusive bedre sikkerhed og st鎟kere "
-"konfigurationsmuligheder."
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"K鴕er planlagte kommandoer med 'at' kommandoen p tiden specificeret da 'at' "
-"blev k鴕t, og k鴕er batch kommandoer n錼 den gennemsnitlige systembelastning "
-"er lav nok"
+msgid "Japan (cable)"
+msgstr "Japan (kabel)"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"apmd bruges til at overv錱e batteristatus og skrive log til syslog.\n"
-"Den kan ogs bruges til at lukke maskinen n錼 batteriet er p lav."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planl鎔ger"
+"\n"
+"Velkommen til guiden for printerinstallation\n"
+"\n"
+"Denne guide lader dig installere printere sluttet til denne maskine, direkte "
+"til netv鎟ket eller til en ekstern Windows-maskine.\n"
+"\n"
+"Hvis du har printere sluttet til denne maskine, s tilslut og t鎛d dem nu s "
+"de kan identificeres automatisk. Netv鎟ksprinterne og Windows-maskinerne "
+"skal ogs v鎟e tilsluttede og t鎛dte.\n"
+"\n"
+"Bem鎟k at det tager l鎛gere tid at identificere netv鎟ksprintere end at "
+"identificere lokalt tilsluttede printere. S deaktiv閞 autoidentifikation af "
+"netv鎟ksprintere og/eller printere sluttede til Windows-maskiner hvis du "
+"ikke har brug for dette.\n"
+"\n"
+"Klik p \"N鎠te\" hvis du er klar og p \"Annull閞\" hvis du ikke vil "
+"installere printere nu."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
+msgid "Initial tests"
+msgstr "Begyndelsestester"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
+msgid "Continue"
+msgstr "Forts鎡"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Brug: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Custom Restore"
+msgstr "Tilpasset genskabelse"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] sk鎟m\n"
-" XFdrake opl鴖ning"
+"'%s': Hvis et lydkort er blevet fundet p dit system, vil det blive vist "
+"her. Hvis du bem鎟ker at det viste lydkort ikke er det som faktisk er til "
+"stede p systemet, kan du klikke p knappen og v鎙ge en anden driver."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=enhed] [--update-sane=sane_kilde_kat] [--update-"
-"usbtable] [--dynamic=enhed]"
+msgid "Script-based"
+msgstr "Skript-baseret"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-" --no-confirmation sp鴕g ikke det f鴕ste bekr鎓telsessp鴕gsm錶 i "
-"MandrakeUpdate-tilstand\n"
-" --no-verify-rpm efterpr鴙 ikke pakke-signaturer\n"
-" --changelog-first v韘 changelog f鴕 filliste i beskrivelsesvinduet\n"
-" --merge-all-rpmnew foresl at flette alle .rpmnew/.rpmsave filer fundet"
+msgid "Error reading file %s"
+msgstr "Fejl ved l鎠ning af filen %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "PLL-ops鎡ning:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[VALGMULIGHEDER]\n"
-"Program til netv鎟ks- & Internet forbindelse og overv錱ning\n"
-"\n"
-"--defaultintf gr鎛seflade : v韘 denne gr鎛seflade som standard\n"
-"--connect : kobl op til internettet hvis ikke allerede opkoblet\n"
-"--disconnect : kobl fra internettet hvis allerede opkoblet\n"
-"--force : brugt med (dis)connect : gennemtving (dis)connect.\n"
-"--status : returnerer 1 hvis opkoblet, ellers 0; afslut derefter.\n"
-"--quiet : v鎟 ikke interaktiv. Bruges med (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=minfil] [--word=mitord] [--explain=regudtryk] [--alert]"
+msgid " on "
+msgstr " p "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[tastatur]"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL'en skal begynde med http:// eller https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake TerminalServer konfigureringsprogram\n"
-"--enable : aktiv閞 MTS\n"
-"--disable : deaktiv閞 MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : tilf鴍 en eksisterende systembruger til MTS (kr鎣er "
-"brugernavn)\n"
-"--deluser : slet en eksisterende systembruger fa MTS (kr鎣er "
-"brugernavn)\n"
-"--addclient : tilf鴍 en klientmaskine til MTS (kr鎣er MAC-adresse, IP, "
-"nbi aftryksnavn)\n"
-"--delclient : tilf鴍 en klientmaskine til MTS (kr鎣er MAC-adresse, IP, "
-"nbi aftryksnavn)"
+"Du kan direkte opgive URI til printeren. URIen skal v鎟e i henhold til enten "
+"CUPS- eller Foomatic-standarden. Bem鎟k at ikke alle typer URIer "
+"underst鴗tes af alle k-behandlere."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Skrifttype-import og "
-"overv錱ningsapplikation \n"
-"--windows_import : import閞 fra alle tilg鎛gelige windowspartitioner.\n"
-"--xls_fonts : vis alle skrifttyper som allerede eksisterer fra xls\n"
-"--strong : st鎟k verifikation af skrifttyper.\n"
-"--install : install閞 alle skrifttyper og kataloger.\n"
-"--uninstall : afinstall閞 alle skrifttyper og kataloger.\n"
-"--replace : erstat skrifttyper som eksisterer fra f鴕\n"
-"--application : 0 ingen applikation.\n"
-" : 1 alle tilg鎛gelige underst鴗tede applikationer.\n"
-" : applikationsnavn, som \"so\" for staroffice \n"
-" : og gs for ghostscript."
+msgid "Other OS (SunOS...)"
+msgstr "Andet styresystem (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[VALGMULIGHEDER] [PROGRAM-NAVN]\n"
-"\n"
-"VALGMULIGHEDER:\n"
-" --help - udskriv denne hj鎙pebesked.\n"
-" --report - program b鎟 v鎟e 閚 af Mandrakes v鎟kt鴍er\n"
-" --incident - program b鎟 v鎟e 閚 af Mandrakes v鎟kt鴍er"
+msgid "Install/Upgrade"
+msgstr "Install閞/Opgrad閞"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pakker"
#: ../../standalone.pm:1
#, c-format
@@ -7314,4865 +6805,5293 @@ msgstr ""
"--help : v韘 denne besked.\n"
"--version : v韘 versionsnummer.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Dom鎛egodkendelse p錵r鎣et"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller 鎛dre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
"\n"
-"Dette program er udgivet i h錬 om at det vil v鎟e anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORM臠. Se GNU\n"
-"General Public License for flere detaljer.\n"
"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
-"USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Install閞 opdateringer"
+" Tak til:\n"
+"\t- LTSP-projektet http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfigur閞 tjenester"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Konfigur閞 X"
+msgid "Use libsafe for servers"
+msgstr "Brug libsafe for servere"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Install閞 systemopstarter"
+msgid "Icelandic"
+msgstr "Islandsk"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Konfigur閞 netv鎟k"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Brug: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Tilf鴍 bruger"
+msgid "Please relog into %s to activate the changes"
+msgstr "Log ind i %s igen for at aktivere 鎛dringerne"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Adgangskode for root"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Install閞 system"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modus"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "V鎙g pakker til installation"
+msgid "Output"
+msgstr "Uddata"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Format閞 partitioner"
+msgid "Circular mounts %s\n"
+msgstr "Cirkul鎟e monteringer %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Opdeling af disk"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "V鎙g tastatur"
+msgid "HardDrive / NFS"
+msgstr "Diskdrev / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "V鎙g installations-metode"
+msgid "a number"
+msgstr "et tal"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
+msgid "Swedish"
+msgstr "Svensk"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Konfigur閞 mus"
+msgid "Which %s driver should I try?"
+msgstr "Hvilken %s driver skal jeg pr鴙e?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licens"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"Du vil modtage en advarsel hvis en af de valgte tjenester ikke l鎛gere k鴕er"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "V鎙g sprog"
+msgid "Filesystem types:"
+msgstr "Filsystems-typer:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", multi-funktions-enhed p HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "O.k."
+msgid "Northern Mariana Islands"
+msgstr "Nordmarianerne"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ingenting"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "bruger:"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installations-sk鎟mdriver)"
+msgid "Please enter your password"
+msgstr "Indtast din adgangskode"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration underst鴗telse, men kun med XFree %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan f din maskine til at l錽e eller g "
-"ned."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Dit kort kan have 3D hardware accelerations-underst鴗telse med XFree %s."
+"Navnet p profilen der skal oprettes (den nye profil oprettes som en \n"
+"kopi af den nuv鎟ende) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med 3D hardware acceleration"
+msgid "Floppy"
+msgstr "Diskette"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration underst鴗telse, men kun med XFree %s.\n"
-"VIGTIGT: Dette er eksperimentelt og kan f din maskine til at l錽e eller g "
-"ned.\n"
-"Dit kort er underst鴗tet af XFree %s som kan have bedre underst鴗telse i 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Mark閞 om du vil slette dit CDRW-medie (1. session"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
-"Dit kort er underst鴗tet af XFree %s som kan have bedre underst鴗telse i 2D."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referencer"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Systemopstarter"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigur閞 kun kort \"%s\"%s"
+msgid "Move"
+msgstr "Flyt"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
+msgid "Bootloader to use"
+msgstr "Systemopstarter der skal bruges"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigur閞 alle sk鎟me uafh鎛gigt"
+msgid "SMB server host"
+msgstr "SMB-serverv鎟t"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfiguration af XFree 鴑sker du?"
+msgid "Name Servers:"
+msgstr "Navne-servere:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfiguration"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Advarsel\n"
+"\n"
+"L鎠 venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
+"der st錼, m du ikke installere indholdet af CD-en. Tryk p 'N鎔t' for at "
+"forts鎡te installationen uden disse cdrommer.\n"
+"\n"
+"\n"
+"Visse komponenter p den n鎠te CD er ikke omfattet af GPL-licensen eller "
+"andre lignende licenser. Hver enkelt komponent er derfor omfattet af de "
+"betingelser der er beskrevet i dets egen licens. L鎠 derfor venligst "
+"betingelserne omhyggeligt og f鴏g de opstillede betingelser n錼 du bruger og/"
+"eller videredistribuerer komponenterne. S錮anne licenser forhindrer normalt "
+"kopiering (sikkerhedskopiering undtaget), videredistribuering, at folk "
+"skiller programmet ad, eller 鎛drer i komponenterne. Ethvert brud p "
+"licensen vil 鴍eblikkeligt fratage dig rettighederne beskrevet i den "
+"specifikke licens. Medmindre licensen giver dig lov hertil, vil det normalt "
+"ikke v鎟e tilladt at installere programmet p mere end 閚 maskine, eller "
+"bruge det p et netv鎟k. Hvis du er i tvivl, s kontakt venligst producenten "
+"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
+"s錮anne komponenter inklusive dokumentationen er normalt forbudt.\n"
+"\n"
+"\n"
+"Alle rettigheder til komponenterne p CD-en tilh鴕er deres respektive "
+"skabere og er beskyttet af Lov om Ophavsret.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "V鎙g hukommelsesm鎛gde for dit grafikkort"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Fjern denne printer fra Star Office/OpenOffice.org/GIMP.org"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Dit system underst鴗ter konfiguration af flere sk鎟me\n"
-"Hvad vil du g鴕e?"
+"Linux Virtuel Server, brugt til at bygge en server med h鴍 ydelse og\n"
+"tilg鎛gelighed."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Flersk鎟ms-konfiguration"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milliarder farver (32 bit)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "V鎙g en X-server"
+msgid "Micronesia"
+msgstr "Mikronesien"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X-server"
+msgid "License"
+msgstr "Licens"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
+msgid "This may take a moment to generate the keys."
+msgstr "Det kan tage lidt tid at generere n鴊lerne."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 Mb"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
+"Automatisk identifikation af printere (Lokal, TCP/Socket og SMB-printere)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 Mb"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (der bruger pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 Mb"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Der er opst錯t en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
+"der kan oprettes nye filsystemer. Unders鴊 din maskine for at finde 錼sagen "
+"til problemet"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 Mb"
+msgid "Starting the printing system at boot time"
+msgstr "Starter printsystemet ved opstart"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 Mb"
+msgid "Do you want to start the connection at boot?"
+msgstr "豱sker du at starte din forbindelse ved opstart?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 Mb"
+msgid "Processor ID"
+msgstr "Processor-ID"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kb"
+msgid "Sound trouble shooting"
+msgstr "Probleml鴖ning omkring lyd"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kb"
+msgid "Polish (qwerty layout)"
+msgstr "Polsk (polsk layout)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "aktiv閞 nu"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Behold 鎛dringer?\n"
-"Nuv鎟ende konfiguration er:\n"
"\n"
-"%s"
+"Drakbackup aktiviteter via CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Valg"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Du er ved at installere printsystemet %s p et system k鴕ende p "
+"sikkerhedsniveau %s.\n"
+"\n"
+"Dette printsystem k鴕er som en d鎚on (baggrundsproces) som venter p "
+"printeropgaver og behandler dem. Denne d鎚on er ogs tilg鎛gelig for "
+"eksterne maskiner via netv鎟ket, og derfor er det et muligt angrebspunkt. "
+"Derfor bliver kun nogle f udvalgte d鎚oner startet op som standard i dette "
+"sikkerhedsniveau.\n"
+"\n"
+"豱sker du virkelig at konfigurere udskrivning p denne maskine?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Afpr鴙"
+msgid "Host \"%s\", port %s"
+msgstr "V鎟t \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Opl鴖ning"
+msgid "This partition can't be used for loopback"
+msgstr "Denne partition kan ikke bruges til loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Sk鎟m"
+msgid "File already exists. Use it?"
+msgstr "Filen findes allerede. Skal den bruges?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafikkort"
+msgid "received: "
+msgstr "modtaget: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
+msgid "Right Alt key"
+msgstr "H鴍re alt-tast"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
+msgid "the list of alternative drivers for this sound card"
+msgstr "listen af alternative drivprogrammer for dette lydkort"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
-"gange (per sekund) hele sk鎟mbilledet bliver genopfrisket, og (vigtigst af "
-"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
-"kan tegnes p sk鎟men hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en sk鎟mtype med "
-"opdateringsfrekvenser, der er st鴕re end din sk鎟ms form錯n: du risikerer at "
-"鴇el鎔ge din sk鎟m.\n"
-"Hvis du er i tvivl, b鴕 du v鎙ge en ops鎡ning, som du med SIKKERHED ved\n"
-"at din sk鎟m kan klare."
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Unders鴊ning for Plug'n Play mislykkedes. V鎙g venligst den rigtige sk鎟m"
+msgid "Scanner sharing"
+msgstr "Skannerdeling"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Producent"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunesien"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "V鎙g en sk鎟mtype"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikkort: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Klik p en enhed i det venstre tr for at vise dets oplysninger h閞."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "V鎙g opl鴖ning og farvedybde"
+msgid "XawTV isn't installed!"
+msgstr "XawTV er ikke installeret!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Opl鴖ninger"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Opret/overf鴕\n"
+"sikkerhedskopieringsn鴊ler for SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farver (32 bit)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
+msgid "old static device name used in dev package"
+msgstr "gammel statisk enhedsnavn brugt i dev-pakke"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
+msgid "This label is already used"
+msgstr "Denne m鎟kat er allerede brugt"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Velkommen til guiden for printerinstallation\n"
+"\n"
+"Denne guide lader dig installere printere sluttet til denne maskine eller "
+"direkte til netv鎟ket.\n"
+"\n"
+"Hvis du har printere sluttet til denne maskine, s tilslut og t鎛d dem nu s "
+"de kan identificeres automatisk. Netv鎟ksprinterne skal ogs v鎟e "
+"tilsluttede og t鎛dte.\n"
+"\n"
+"Bem鎟k at det tager l鎛gere tid at identificere netv鎟ksprintere end at "
+"identificere lokalt tilsluttede printere. S deaktiv閞 autoidentifikation af "
+"netv鎟ksprintere hvis du ikke har brug for dette.\n"
+"\n"
+"Klik p \"N鎠te\" hvis du er klar og p \"Annull閞\" hvis du ikke vil "
+"installere printere nu."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter formatering af partitionen %s vil alle data p denne partition g tabt"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
+msgid "Connection Time: "
+msgstr "Tilslutningstid: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Forsvinder om %d sekunder"
+msgid "select perm file to see/edit"
+msgstr "v鎙g perm-fil at se eller redigere"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"En fejl indtraf:\n"
-"%s\n"
-"Pr鴙 at 鎛dre nogen parametre"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Advarsel: afpr鴙ning af dette grafikkort kan f din maskine til at fryse"
+"Inds鎡 installations-cdrom'en i dit cdrom-drev og tryk p Ok, n錼 det gjort\n"
+"Hvis du ikke har den - tryk p Annull閞, s undg錽 levende opgradering"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "豱sker du at afpr鴙e konfigurationen?"
+msgid "Use group id for execution"
+msgstr "Brug gruppe-id ved udf鴕elsen"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
+msgid "Choose the default user:"
+msgstr "V鎙g den forvalgte bruger:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Hvilken standard bruger dit tv?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Grafikkortet ser ud til at have en TV-UD-forbindelse.\n"
-"Den kan konfigureres s den fungerer med billedbuffer\n"
"\n"
-"Til dette skal du tilslutte grafikkortet til tv'et inden du starter "
-"maskinen.\n"
-"V鎙g dern鎠t indgangen \"TVout\" i starth錸tereren.\n"
-"\n"
-"Har du denne funktion?"
+"Eksterne CUPS-servere beh鴙es ikke at blive konfigureret her: \n"
+"disse printere vil automatisk blive fundet."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Jeg kan s鎡te din maskine op til automatisk at starte X ved\n"
-"opstart. 豱sker du at starte X hver gang du genstarter?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Start X ved systemstart"
+"Du kan v鎙ge andre sprog der vil v鎟e tilg鎛gelige efter installationen"
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
+msgid "Domain"
+msgstr "Dom鎛e"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Pr鎐is RAM-m鎛gde, hvis p錵r鎣et (fandt %d Mb)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Opl鴖ninger %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO og grub er opstartsindl鎠ere for GNU/Linux. Normalt er dette trin\n"
+"helt automatisk. DrakX vil analysere opstartssektoren p disken og\n"
+"handle ud fra det som findes der.\n"
+"\n"
+" * Hvis en opstartssektor for Windows bliver fundet, vil den erstatte denne "
+"med\n"
+"en grub- eller LILO-opstartsektor. P denne m錮e kan du indl鎠e enten\n"
+"GNU/Linux eller et andet operativsystem.\n"
+"\n"
+" * Hvis en opstartsektor for grub eller LILO bliver fundet, vil den blive "
+"erstattet\n"
+"med en ny.\n"
+"\n"
+"Hvis det ikke er mulig at afg鴕e dette automatisk, vil DrakX sp鴕ge dig "
+"hvor\n"
+"opstartsindl鎠eren skal installeres."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Udbyder DNS 2 (valgfri)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
+msgid "Boot device"
+msgstr "Opstartsenhed"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikkort: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Hvilken partition 鴑sker du at 鎛dre st鴕relse p?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Sk鎟ms lodrette frekvens: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Fjerne, mindre 鴈r, USA"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sk鎟ms vandrette frekvens: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Et v鎟kt鴍 til at overv錱e dine logfiler"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Sk鎟m: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
+msgid "detected on port %s"
+msgstr "Detekteret p port %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Grafikkort: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Monteringssti: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Mark閞 om du bruger en DVDRAM-enhed"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Splash selection"
+msgstr "Valg af opstartssk鎟m"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL'en skal begynde med http:// eller https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Udvidet partition ikke underst鴗tet p denne platform"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Indtast LRL for WebDAV-serveren"
+msgid "ISDN Configuration"
+msgstr "ISDN konfiguration"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Monteringssti"
+msgid "high"
+msgstr "h鴍"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "Internet Connection Sharing"
+msgstr "Deling af internetforbindelse"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Mont閞"
+msgid "Choose file"
+msgstr "V鎙g fil"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Afmont閞"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
+"muligvis lave manuelle rettelser efter installationen."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Ny"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Udskriver/Adgang til fotokort p '%s'"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV er en protokol som lader dig montere en webserver katalog lokalt\n"
-"og behandle det som et lokalt filsystem (givet at webserveren er "
-"konfigureret\n"
-"som en WebDAV-server). Hvis du 鴑sker at tilf鴍e WebDAV-monteringspunkter,\n"
-"s v鎙g \"Ny\"."
+"Vil du aktivere udskrift p printerne som n鎣nes ovenfor eller p printerne "
+"i det lokale netv鎟k?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
+msgid "Printer default settings"
+msgstr "Standardindstillinger for printer"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Type"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Standard PS2 mus med hjul"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmont閞'' f鴕st"
+msgid "Removing old printer \"%s\"..."
+msgstr "Fjerner gammel printer \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Slet"
+msgid "Select a device !"
+msgstr "V鎙g en enhed!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Opret"
+msgid "Remove selected server"
+msgstr "Fjern valgte server"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
+msgid "French Southern Territories"
+msgstr "Franske sydlige territorier"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Tom"
+msgid "the vendor name of the processor"
+msgstr "navnet p producenten af processoren"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "Det b鴕 laves en backup af alle data p denne partition"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Installerer pakke %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Tjekker enhed og konfigurerer HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"For at du kan f flere partitioner, skal du slette 閚, s der kan oprettes "
+"en udvidet partition"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Din printer blev konfigureret automatisk til at give dig adgang til fotokort-"
+"drevene fra din PC. Nu kan du f adgang til dine fotokort med det grafiske "
+"program 'MtoolsFM' (Menu: 'Programmer' -> 'Filv鎟kt鴍er' -> 'Mtools "
+"Filadministration') eller kommandolinjev鎟kt鴍et 'mtools' (indtast 'man "
+"mtools' p kommandolinjen for mere information). Du finder kortets filsystem "
+"under drevbogstavet 'p:', eller f鴏gende drevbogstaver hvis du har mere end "
+"閚 HP-printer med fotokortdrev. I 'MtoolsFM' kan du skifte mellem "
+"drevbogstaver med feltet i de 鴙erste h鴍re hj鴕ner af fillisterne."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "V鎙g pakker til installation"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "Ingen diskdrev fundet"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Nogle fejl under sendmail kommer fra \n"
+" en d錼lig konfiguration af postfix. For at l鴖e dette skal du\n"
+" s鎡te myhostname eller mydomain i /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Klik p en partition"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Alle eksisterende partitioner og deres data vil g tabt p drev %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Du har 閚 stor MicroSoft Windows partition.\n"
-"Jeg foresl錼 at du f鴕st 鎛drer st鴕relsen p partitionen\n"
-"(klik p den, og klik herefter p \"St鴕relses鎛dring\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "V鎙g handling"
+"Dit system har ikke nok plads tilbage til en installation eller opgradering "
+"(%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Vejleder"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Alle printere beh鴙er et navn (f.eks. 'printer').\n"
+"Beskrivelsen og lokaliseringsfelterne beh鴙er ikke \n"
+"udfyldes. De er kommentarer til brugerne."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Hvis du planl鎔ger at bruge Yaboot, skal du huske at efterlade fri plads p錦n"
-"begyndelsen af disken (2048 sektorer skulle v鎟e nok)"
+"'%s': Et klik p '%s'-knappen vil 錬ne vejlederen for printerkonfigurering. "
+"Kig i det tilh鴕ende kapitel i 'Startvejledningen' for mere information om "
+"hvordan man ops鎡ter en ny printer. Gr鎛sefladen\n"
+"pr鎠enteret der ligner den som bruges p installationstidspunktet."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Lav gerne en sikkerhedkopi af dine data f鴕st"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Read carefully!"
-msgstr "L鎠 omhyggeligt!"
+msgid "Network interface"
+msgstr "Netv鎟ksgr鎛sesnit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Krypteringsn鴊le (igen)"
+msgid "Reading printer data..."
+msgstr "L鎠er printerdata ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Krypteringsn鴊le"
+msgid "Korean keyboard"
+msgstr "Koreansk tastatur"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Krypteringsn鴊lerne stemmer ikke overens"
+msgid "Not connected"
+msgstr "Ikke tilsluttet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Greek"
+msgstr "Gr鎠k"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Denne krypteringsn鴊le er for nem at g鎡te (skal mindst v鎟e p %d tegn)"
+"Argumenter: (arg)\n"
+"\n"
+"Hvis \\fIarg\\fP = ALL tillades /etc/issue og /etc/issue.net at eksistere. "
+"Hvis \\fIarg\\fP = NONE er ingen problemer tilladt \n"
+"ellers er kun /etc/issue tilladt."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "V鎙g din krypteringsn鴊le for filsystemet"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts og Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Krypteringsn鴊le for filsystem"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Overf鴕sel klar.\n"
+"Du vil m錽ke kontrollere at du kan logge ind p serveren med:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"uden at blive spurgt om en adgangskode."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Type: "
-msgstr "Type: "
+msgid "Enable OF Boot?"
+msgstr "Skal det v鎟e muligt at starte fra OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "p kanal %d id %d\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Du kan ikke bruge JFS p partitioner mindre end 16Mb"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Sk鎟ms lodrette frekvens: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
+msgid "path"
+msgstr "sti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Mount point"
+msgstr "Monteringssti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"En fejl indtraf:\n"
+"%s\n"
+"Pr鴙 at 鎛dre nogen parametre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s\n"
-msgstr "St鴕relse: %s\n"
+msgid "Restore system"
+msgstr "Genskab system"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Read-only"
-msgstr "Skrivebeskyttet"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Dette er maskinerne p hvilke de lokalt forbundne skannere skal g鴕es "
+"tilg鎛gelige:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Device: "
-msgstr "Enhed: "
+msgid "The DHCP end ip"
+msgstr "Stutnings-ip p DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
+msgid "Another one"
+msgstr "En anden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup"
+msgstr "Drakbackup"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Colombia"
+msgstr "Columbia"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Nuv鎟ende konfiguration af `%s':\n"
"\n"
-"Denne partition er nok\n"
-"en driver-partition. Du skal\n"
-"nok bare lade den v鎟e.\n"
+"Netv鎟k: %s\n"
+"IP-adresse: %s\n"
+"IP-attribut: %s\n"
+"Driver: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
+msgid "Reunion"
+msgstr "R閡nion"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Enhedsst鴕relse %s\n"
+msgid "Details"
+msgstr "Detaljer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-" (g鎙der kun MS-DOS-opstart, ikke LILO)\n"
+msgid "Synchronization tool"
+msgstr "Synkroniseringsv鎟kt鴍"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Tjekker dit system..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Udskriv"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Monteret\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Inds鎡 b錸det med volumeetiket %s\n"
+" i b錸denheden %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
+msgid "Mongolia"
+msgstr "Mongoliet"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formateret\n"
+msgid "Mounted\n"
+msgstr "Monteret\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d til %d\n"
+msgid "Graphical Interface"
+msgstr "Grafisk gr鎛seflade"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
+msgid "Restore Users"
+msgstr "Genskab brugere"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "St鴕relse: %s"
+msgid "Encryption key for %s"
+msgstr "Krypteringsn鴊le for %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper h錸dterer RPC tilslutninger, som bliver brugt af protokoller som "
+"NFS og NIS. Portmap serveren skal k鴕e p maskiner som bruger protokoller "
+"der udnytter RPC mekanismen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Navn: "
+msgid "Detected hardware"
+msgstr "Fundet maskinel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et g鎡)\n"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partition %s er nu kendt som %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmesisk)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
+msgid "Enabling swap partition %s"
+msgstr "Formaterer swap-partition %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Der er ingen FAT-partitioner at bruge som loopback (eller ikke nok plads "
+"tilbage)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
+msgid "Armenian (old)"
+msgstr "Armensk (gammel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
+"En printer med navnet \"%s\" eksisterer allerede p %s. \n"
+"Klik \"Overf鴕\" for at overskrive.\n"
+"Du kan ogs give et nyt printernavn, eller overspringe denne printer."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data p denne partition g tabt"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "Find l鴖ningerne p dine problemer via MandrakeSofts online-support."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere 鎛dringerne"
+msgid ", host \"%s\", port %s"
+msgstr ", v鎟t \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrevet p disken!"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Pakken %s kr鎣es. 豱sker du at installere den?"
+msgid "%s formatting of %s failed"
+msgstr "%s formatering af %s mislykkedes"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
+msgid "Partitioning failed: %s"
+msgstr "Partitionering mislykkedes: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "V鎟 forsigtig: denne operation er farlig."
+msgid "Canada (cable)"
+msgstr "Canada (kabel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "chunk size"
-msgstr "enhedsst鴕relse"
+msgid "Upgrade"
+msgstr "Opgrad閞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "niveau"
+msgid "Workstation"
+msgstr "Arbejdsstation"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "enhed"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installerer pakke %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Diverse"
+msgid "Kyrgyzstan"
+msgstr "Kirgisistan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Modulindstillinger"
+msgid "With basic documentation"
+msgstr "Med basal dokumentation"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron en periodisk kommando planl鎔ger"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, v鎙g en anden fil"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Du skal have en rod partition. For at f dette, lav en ny partition (eller "
+"v鎙g en eksisterende).\n"
+"V鎙g s kommandoen \"Monterings-sti\" og s鎡 den til `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Giv et filnavn"
+msgid "Proxy should be http://..."
+msgstr "Proxy skal v鎟e http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
+msgid "South Africa"
+msgstr "Sydafrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "St鴕relse i Mb: "
+msgid "Western Sahara"
+msgstr "Vestlig Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot diskette/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "苙dr printerkonfiguration"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
+msgid "Choose a partition"
+msgstr "V鎙g en partition"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM-navn?"
+msgid "Edit current rule"
+msgstr "Redig閞 aktuelle regel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "ny"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "V鎙g en eksisterende LVM som skal udvides"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Aktiv閞/deaktiv閞 logning af IPv4 m鎟kelige pakker."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "V鎙g en eksisterende RAID som skal udvides"
+msgid "Please test the mouse"
+msgstr "Test musen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Flytter partition..."
+msgid "Other Media"
+msgstr "Andet medie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Flytter"
+msgid "Backup system files"
+msgstr "Lav sikkerhedskopi af systemfiler"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor 鴑sker du at flytte den til?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk 鴑sker du at flytte den til?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Flyt"
+msgid "LDAP Base dn"
+msgstr "LDAP grundl鎔gende dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Ny st鴕relse i Mb: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Du kan ikke v鎙ge denne pakke, da der ikke er nok plads tilbage til at "
+"installere den"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "V鎙g den nye st鴕relse"
+msgid "generate auto-install floppy"
+msgstr "lav autoinstallations-diskette"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "St鴕relses鎛dring"
+msgid "Dialing mode"
+msgstr "Opringningsm錮e"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter 鎛dring af st鴕relsen af partition %s vil alle data p denne partition "
-"g tabt"
+msgid "File sharing"
+msgstr "Fildeling"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Det b鴕 laves en backup af alle data p denne partition"
+msgid "Clean /tmp at each boot"
+msgstr "Rens /tmp ved hver systemopstart"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "St鴕relsen p denne partition kan ikke 鎛dres"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets gr鎛ser"
+msgid "Please choose your type of mouse."
+msgstr "V鎙g muse-type."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Hvor 鴑sker du at montere %s?"
+msgid "class of hardware device"
+msgstr "Klasse af maskinenhed"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback f鴕st"
+"Dette er maskinerne og netv鎟kerne p hvilke de lokalt forbundne printere "
+"skal g鴕es tilg鎛gelige:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor 鴑sker du at montere partitionen %s?"
+msgid "United Kingdom"
+msgstr "Storbritannien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Hvor 鴑sker du at montere loopback-filen %s?"
+msgid "running"
+msgstr "k鴕er"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
+msgid "default"
+msgstr "standard"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem 鴑sker du at bruge?"
+msgid "Indonesia"
+msgstr "Indonesien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Skift partitionstype"
+msgid "France [SECAM]"
+msgstr "Frankrig [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "begr鎛s"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "skal have"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Efter type-鎛dring af partition %s vil alle data p denne partition g tabt"
+"CUPS underst鴗ter ikke printere p Novellservere eller printere som sender "
+"dataene ind i en frit-formet kommando.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Kommandolinje"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Du kan ikke oprette en ny partition\n"
-"(fordi du er oppe p det maksimale antal prim鎟e partitioner)\n"
-"Fjern f鴕st en prim鎟 partition og opret en udvidet partition."
+"Vores komplette udvalg af Linux-l鴖ninger, s vel som specialtilbud p "
+"produkter og andre godbidder, er tilg鎛gelige via nettet i vores e-butik:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Pr鎓erence: "
+msgid "access to administrative files"
+msgstr "adgang til administrative filer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Startsektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Fejl ved sendmail.\n"
+" Din rapport blev ikke sendt.\n"
+" Konfigur閞 venligst sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", multi-funktions-enhed p parallel port \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumenter: (v鎟di)\n"
+"\n"
+"S鎡 skallens tidsudl鴅. En v鎟di p nul betyder intet tidsudl鴅."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "苙dr RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
+msgid "Automatic dependencies"
+msgstr "Automatiske afh鎛gigheder"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Tilf鴍 til LVM"
+msgid "Connecting to the Internet "
+msgstr "Forbindelse til Internettet "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Tilf鴍 til RAID"
+msgid "Restore Other"
+msgstr "Genskab andet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Format閞"
+msgid "TV card"
+msgstr "TV-kort"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Detaljeret information"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Printer p SMB/Windows 95/98/NT server"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Fors鴊er at redde partitionstabellen"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Inds鎡 en diskette i diskettedrevet\n"
-"Alle data p disketten vil blive slettet"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Advarsel"
+"Argumenter: (umask)\n"
+"\n"
+"S鎡 umask for root."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "V鎙g fil"
+msgid "Remove selected host/network"
+msgstr "Fjern valgte v鎟t/netv鎟k"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Kopien af partitionstabellen har ikke samme st鴕relse\n"
-"Forts鎡 alligevel?"
+"Postfix er en transport-agent for post, som bruges af programmer der flytter "
+"post fra en maskine til en anden."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
+msgid "Disconnection from the Internet failed."
+msgstr "Nedkopling fra Internet mislykkedes."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Genindl鎠 partitionstabel"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Her kan du v鎙ge tasten eller tastekombinationen som \n"
+"lader dig skifte mellem forskellige tastaturlayouter\n"
+"(dvs latinsk eller ikke-latinsk)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
+msgid "Network Hotplugging"
+msgstr "Hotplugging af netv鎟k"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
+msgid "if set to yes, reports check result to tty."
+msgstr "hvis sat til ja, s rapport閞 kontrolresultat p tty-en."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
+msgid "Restore From CD"
+msgstr "Genskab fra cd"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"For at du kan f flere partitioner, skal du slette 閚, s der kan oprettes "
-"en udvidet partition"
+"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
+"Med denne mulighed vil andre maskiner p dit lokale netv鎟k kunne bruge "
+"internetforbindelsen p denne maskine.\n"
+"\n"
+"Forsikr dig om at du har konfigureret din internetforbindelse med "
+"drakconnect f鴕 du g錼 videre.\n"
+"\n"
+"Bem鎟k: du skal bruge en dediceret netv鎟ksadapter, for at lave et lokalt "
+"netv鎟k (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Kan ikke tilf鴍e flere partitioner"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"V鎙g hvilken netv鎟ksadapter du 鴑sker at bruge til at lave forbindelse til "
+"Internettet med."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle prim鎟e partitioner er brugt"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Adgang til fotohukommelseskort p din HP-multifunktionsenhed"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Drev-information"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"For鴊 din maskines ydelse med hj鎙p fra et et udvalg af firmaer som tilbyder "
+"professionelle l鴖ninger kompatible med Mandrake Linux. "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Allok閞 automatisk"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Deling af internetforbindelse er nu sl錯t fra"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Slet alt"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "hvis sat til ja, s efterpr鴙 tjeksummer p suid/sgid-filer."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "豱sker du at gemme /etc/fstab-鎛dringerne?"
+msgid "Latin American"
+msgstr "Latinamerikansk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
+msgid "Japanese text printing mode"
+msgstr "Printertilstand for japansk tekst"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
+msgid "Old device file"
+msgstr "Gammel enhedsfil"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Forts鎡 alligevel?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
+msgid "Button `%s': %s"
+msgstr "Knap '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
+msgid "Please wait"
+msgstr "Vent venligst"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Fortryd"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Afslut"
+msgid "None"
+msgstr "Ingen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "V鎙g en partition"
+msgid "The entered IP is not correct.\n"
+msgstr "Den indtastede IP er ikke korrekt.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "V鎙g en ny partition"
+msgid "Ethernet Card"
+msgstr "Ethernet-kort"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Skift type"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "S鴊 efter servere"
+msgid "Install"
+msgstr "Install閞"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Dom鎛e"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Klik p '%s ->' hvis du 鴑sker at slette alle data og partitioner der ligger "
+"p dette diskdrev. V鎟 omhyggelig, efter klik p '%s ->' vil du ikke v鎟e i "
+"stand til at redde nogen data eller partitioner, der ligger p dette "
+"diskdrev, inklusive alle Windows data.\n"
+"Klik p '<- %s' for at stoppe denne handling uden at tabe nogen data og "
+"partitioner der er tilstede p dette diskdrev."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Brugernavn"
+msgid "Exit install"
+msgstr "Afslut installation"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Indtast venligst dit brugernavn, din adgangskode og dit dom鎛enavn for at f "
-"adgang til denne v鎟t."
+"Alt er blevet konfigureret.\n"
+"Du kan nu dele din internetforbindelse med andre maskiner p dit lokale "
+"netv鎟k, ved at bruge DHCP."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Dom鎛egodkendelse p錵r鎣et"
+msgid "Remote CUPS server"
+msgstr "Ekstern CUPS server"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "En anden"
+msgid "Sun - Mouse"
+msgstr "Sun-mus"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Hvilket brugernavn"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Der er kun 閚 konfigureret netv鎟ksadapter i dit system:\n"
+"\n"
+"%s\n"
+"\n"
+"Jeg skal til at s鎡te dit lokalnet p med den adapter."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Kan ikke logge ind med brugernavn %s (forkert adgangskode?)"
+msgid "Minimal install"
+msgstr "Minimal installation"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu-nummer "
+msgid "Ethiopia"
+msgstr "Etiopien"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-kontrollers"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-kontrolkort"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci-enheder: dette giver PCI slottet, enheden og funktionen for dette "
+"kort\n"
+"- eide-enheder: enheden er enten en slave- eller mester-enhed\n"
+"- scsi-enheder: scsi-bussen og scsi enheds-id'er"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-kontrolkort"
+msgid "Total size: %d / %d MB"
+msgstr "Total st鴕relse: %d / %d Mb"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-kontrolkort"
+msgid "disabled"
+msgstr "deaktiveret"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontrolkort"
+msgid "Search for new scanners"
+msgstr "S鴊 efter nye skannere..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "Sl錼 servere fra..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Skanner"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"V鎙g tidsinterval mellem\n"
+"hver sikkerhedskopiering"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Ukendt|andre"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Installationen af %s mislykkedes. F鴏gende fejl opstod:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Broer og system-kontrolkort"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Kan ikke opstarte mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Du har valgt f鴏gende servere: %s\n"
+"\n"
+"\n"
+"Disse servere er aktiveret som standard. De har ingen kendte "
+"sikkerhedsproblemer, men nogen nye kan blive fundet. I s tilf鎙de skal du "
+"opgradere s snart som mulig.\n"
+"\n"
+"\n"
+"豱sker du virkelig at installere disse servere?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet-kort"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netv鎟ksprinter (TCP/sokkel)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Processorer"
+msgid "Backup User files..."
+msgstr "Sikkerhedskopi閞 brugerfiler..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
+msgid "Install system"
+msgstr "Install閞 system"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Lydkorl"
+msgid "First DNS Server (optional)"
+msgstr "F鴕ste DNS-server (valgfri)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Andre multimedie-enheder"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Alternaltivt kan duangive et enhedsnavn/filnavn p inddatalinjen"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV-kort"
+msgid "dhcpd Config..."
+msgstr "Konfigur閞 dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Videokort"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Indstilling er allerede gjort. men er de-aktiveret for n鎟v鎟ende."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "B錸d"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub-installering"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Israelsk"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-br鎛dere"
+msgid "load setting"
+msgstr "indl鎠 ops鎡ning"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "cd-rom"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Printer \"%s\" p server \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disk"
+msgid "Floppy can be removed now"
+msgstr "Diskette kan fjernes nu"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Truly minimal install"
+msgstr "Virkeligt minimale installation"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Diskette"
+msgid "Denmark"
+msgstr "Danmark"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Lad mig v鎙ge hvilkensomhelst driver"
+msgid "Moving partition..."
+msgstr "Flytter partition..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Drivprogram:"
+msgid "(This) DHCP Server IP"
+msgstr "(Denne) DHCP-servers IP-adresse"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Hvis du virkelig mener du v閐 hvilken driver der er den rette til dit kort "
-"kan du v鎙ge 閚 fra listen ovenfor.\n"
-"\n"
-"Den aktuelle driver for dit %s-lydkort er \"%s\" "
+msgid "Test of the configuration"
+msgstr "Test konfigurationen"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "V鎙ger en vilk錼lig driver"
+msgid "Installing %s ..."
+msgstr "Installerer %s..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Den klassiske metode for at fejls鴊e lydops鎡ningten er at k鴕e f鴏gende\n"
-"kommandoer:\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" vil vise hvilken driver lydkortet bruger \n"
-"som standard\n"
-"- \"grep sound-slot /etc/modules.conf\" vil vise hvilken driver som er i "
-"brug\n"
-"\n"
-"- \"/sbin/lsmod\" lader dig se om denne driver er indl鎠t\n"
+"Hvis du fortalte installeringen at du 鴑skede at v鎙ge individuelle pakker, "
+"vil den vise et tr med alle pakker opdelt i grupper og undergrupper. Under "
+"gennembladring af tr鎒t kan du udv鎙ge hele grupper, undergrupper eller "
+"individuelle pakker.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" vil\n"
-"vise om disse tjenester er sat op til at startes.\n"
+"Hver gang du udv鎙ger en pakke i tr鎒t vil en beskrivelse fremkomme til "
+"h鴍re for at lade dig vide form錶et med pakken. \n"
"\n"
-"- \"aumix -q\" vil vise om lyden er slukket ned eller ikke\n"
+"!! N錼 en server-pakke er blevet valgt, enten fordi du specielt valgte den "
+"individuelle pakke, eller fordi den var en del af en gruppe af pakker, vil "
+"du blive spurgt om at bekr鎓te atdu virkelig 鴑sker at installere disse "
+"servere. Som standard under Linux Mandrake bliver installerede servere "
+"startet op ved opstart af maskinen. Selvom de er sikre og ikke har nogen "
+"kendte problemer p udgivelsestidspunktet for distributionen, er det absolut "
+"muligt at sikkerhedshuller blev opdaget efter at denne version af Mandrake "
+"Linux blev f鎟diggjort. Hvis du ikke v閐 hvad en bestemt tjeneste vil g鴕e "
+"eller hvorfor den skal installeres, s klik '%s' her. Et klik med '%s' her "
+"vil installere de n鎣nte servere og de vil som standard blive startet "
+"automatisk under opstarten!!\n"
+"\n"
+"'%s'-valget deaktiverer advarselsdialogen, som vises hver gang "
+"installeringsprogrammet automatisk v鎙ger en pakke for at l鴖e et "
+"afh鎛gighedsproblem Nogen pakker har relationer mellem hinanden s "
+"installation af en pakke kr鎣er at nogen andre programmer skal v鎟e "
+"installeret. Installationsprogrammet kan beregne hvilke pakker der er kr鎣et "
+"for at tilfredsstille en afh鎛gighed for at kunne f鎟digg鴕e en installation "
+"problemfrit.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vil vise hvilke programmer som bruger "
-"lydkortet\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Probleml鴖ning omkring lyd"
+"Det klejne disketteikon i bunden af listen muligg鴕 indl鎠ning af en "
+"pakkeliste udvalgt ved en tidligere installation. Dette er nyttigt hvis du "
+"har et antal maskiner som du 鴑sker at konfigurere p samme m錮e. Klik p "
+"denne ikon vil bede dig om at inds鎡te en diskette tidligere frembragt ved "
+"slutningen p en anden installation. Se r錮 nr to i det sidste trin for "
+"hvordan en s錮an diskette kan laves."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Drivprogrammet %s for lydkortet er ikke listet"
+msgid "Choose your filesystem encryption key"
+msgstr "V鎙g din krypteringsn鴊le for filsystemet"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Ukendt drivprogram"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"V鎙g cd/dvd-enhed.\n"
+"(Tryk Enter for at overf鴕e indstillinger til andre felter.\n"
+"Dette felt beh鴙es ikke, det er kun et v鎟kt鴍 for at udfylde formularen.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Der findes intet kendt drivprogram for lydkortet (%s)"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Ingen kendt driverrutine"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Der findes ingen fri driver for lydkortet (%s) men der er en leverand鴕ejet "
-"driver p '%s'"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Ingen open source driverrutine"
+msgid "(default value: %s)"
+msgstr "(Forvalgt: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... S鎡ter konfigurationen i anvendelse"
+msgid "Alternative test page (Letter)"
+msgstr "Alternativ testside (letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Den gamle \"%s\"-driver er sortlistet.\n"
+"Konfiguration af DHCP-server.\n"
"\n"
-"Den er blevet rapporteret at lave fejl i kernen ved afslutningen.\n"
+"Her kan du v鎙ge forskellige muligheder for konfigurationen af DHCP-"
+"serveren.\n"
+"Hvis du ikke kender betydningen af en valgmulighed, s lad den blot v鎟e som "
+"den er.\n"
"\n"
-"Den nye \"%s\"-driver vil f鴕st blive brugt ved n鎠te systemopstart."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Probleml鴖ning"
+msgid "Choose an X server"
+msgstr "V鎙g en X-server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Swap-partitions st鴕relse i Mb: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) var den f鴕ste lyd-API. Det er den f鴕ste OS-"
-"uafh鎛gige lyd-API (Den er tilg鎛gelig p de fleste Unix-systemer) men den "
-"er en meget basal og begr鎛set API.\n"
-"Ydermere genopfandt alle OSS-drivere hjulet.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) er en modul鎟 arkitektur som\n"
-"underst鴗ter en ganske stor m鎛gde ISA-, USB- og PCI-kort.\n"
-"\n"
-"Den tilbyder ogs en meget h鴍ere API end OSS.\n"
-"\n"
-"For at bruge ALSA kan man enten bruge:\n"
-"- den gamle OSS-kompatibilitetes-api\n"
-"- den nye ALSA API som tilbyder mange forbedrede faciliteter men som kr鎣er "
-"brug af ALSA-biblioteket.\n"
+"Andet (ikke drakbackup)\n"
+"n鴊lerne findes allerede"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Ingen 鎛dringer til sikkerhedskopi!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formateret\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Installationstype"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Printer '%s' p SMB/Windows server '%s'"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Dit kort bruger i 鴍eblikket %s\"%s\"-driveren (normal driver for dit kort "
-"er \"%s\")"
+"- D鎚on (%s) indeholder:\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d kommaseparerede tal"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Her kan du v鎙ge et alternativ drivprogram (enten OSS eller ALSA) for "
-"lydkortet (%s)"
+"rusers protokollen tillader brugere p et netv鎟k a identificere\n"
+"hvem der er logget p andre maskiner"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Lyd-konfiguration"
+msgid "Automatic Steps Configuration"
+msgstr "Konfiguration af automatiske skridt"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Der findes intet kendt alternativt OSS/ALSA-drivprogram for lydkortet (%s) "
-"som i 鴍eblikket bruger '%s'"
+"豱sker du at vide mere om 舃en Kildetekst-samfundet? V鎟 med i det frie "
+"programmels verden"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Intet alternativ drivprogram"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "aktiv閞 radio-underst鴗telse"
+msgid "Please select data to backup..."
+msgstr "V鎙g data for sikkerhedskopi..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Radio-underst鴗telse:"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"Tilslutning mislykkedes.\n"
+"Kontroll閞 konfigurationen i Mandrakes kontrolcentral."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL-ops鎡ning:"
+msgid "received"
+msgstr "modtaget"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Antal fangningsbuffere for mmap-fangning"
+msgid "/File/_New"
+msgstr "/Fil/_Ny"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Antal fangningsbuffere:"
+msgid "The DNS Server IP"
+msgstr "DHCP-serverens IP-adresse"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tuner-type:"
+msgid "IP Range End:"
+msgstr "Slut p IP-omr錮e:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Kortmodel:"
+msgid "High"
+msgstr "H鴍"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"For de fleste moderne tv-kort vil bttv-modulet fra GNU/Linux-kernen blot "
-"automatisk finde de rette parametre.\n"
-"Hvis dit kort ikke findes korrekt, kan du gennemtvinge den rette tuner og "
-"korttyper her. Bare v鎙g dit tv-korts parametre om n鴇vendigt"
+msgid "NoVideo"
+msgstr "Ingen video"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Dette felt beskriver enheden"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Ukendt|generisk"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Tilf鴍er printer til Star Office/OpenOffice.org/GIMP.org"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Ukendt|CPH06X (bt878) [mange leverand鴕er]"
+msgid "Local Printers"
+msgstr "Lokale printere"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Ukendt|CPH05X (bt878) [mange leverand鴕er]"
+msgid "Installation image directory"
+msgstr "Katalog for installationsaftryk"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Automatisk detektion"
+msgid "NIS Server"
+msgstr "NIS-server"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Lav"
+msgid "Port: %s"
+msgstr "V鎟t: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
+msgid "Spain"
+msgstr "Spanien"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "D錼ligt valg, pr鴙 igen\n"
+msgid "This user name has already been added"
+msgstr "Dette brugernavn eksisterer allerede"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Indsend igen"
+msgid "Choose a file"
+msgstr "V鎙g en fil"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Bem鎟k, en etikette 鎛dredes:\n"
-"%s"
+msgid "Apply"
+msgstr "Anvend"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"V鎙g det f鴕ste tal i 10-omr錮et som du 鴑sker at redigere,\n"
-"Eller tryk retur for at forts鎡te.\n"
-"Dit valg? "
+msgid "Auto-detect available ports"
+msgstr "Auto-detekt閞 tilg鎛gelige porte"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Der er mange ting at v鎙ge imellem (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Deling af internetforbindelse er sl錯t fra"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Dit valg? (standard '%s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " indtast 'void' for tom indgang"
+msgid "Belgium"
+msgstr "Belgien"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "豱sker du at klikke p denne knap?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Knap '%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "V鎙g den vinduesh錸dtering du 鴑sker at benytte:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Undergeneration af cpu'en"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Dit valg? (0/1, standard '%s') "
+msgid "First Time Wizard"
+msgstr "F鴕stegangshj鎙per"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Indgange som du skal udfylde:\n"
-"%s"
+"Der opstod en fejl, men jeg ved ikke hvordan den kan h錸dteres p en\n"
+"p鎛 m錮e.\n"
+"Forts鎡 p eget ansvar!"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indl鎠ning af modul %s mislykkedes.\n"
-"豱sker du at pr鴙e igen med andre parametre?"
+msgid "please wait, parsing file: %s"
+msgstr "vent venligst, fortolker filen: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Specific閞 parametre"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"I nogen tilf鎙de beh鴙er %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. 豱sker du at angive "
-"ekstra\n"
-"parametre for den eller tillade driveren at sondere din maskine for\n"
-"den information den beh鴙er? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke for錼sage nogen skader."
+"For at kunne udskrive p din Lexmark inkjet fra denne konfigurering skal du "
+"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
+"Klik p 'Drivers'-knappen. V鎙g s din model og derefter 'Linux' som "
+"operativsystem. Driverne kommer som RPM-pakker eller skal-skripter med "
+"interaktiv grafisk installation. Du beh鴙er ikke lave denne konfiguration "
+"via de grafiske gr鎛seflader. Annull閞 direkte efter licensaftalen. Udskriv "
+"derefter justeringssider for skrivehovedet med 'lexmarkmaintain', og just閞 "
+"ops鎡ningen af justeringen af hovedet med dette program."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg pr鴙e?"
+msgid "Permissions"
+msgstr "Rettigheder"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Modulindstillinger:"
+msgid "Provider name (ex provider.net)"
+msgstr "Navn p udbyder (f.eks. udbyder.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu s鎡te parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=v鎟di navn2=v鎟di2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
+msgid "Version: %s\n"
+msgstr "Version: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Du kan nu angive parametre til modul %s.\n"
-"Bem鎟k at alle adresser b鴕 indtastes med foranstillet 0x, fx '0x123'"
+"Dit system har kun f resurser. Du kan f problemer med at installere\n"
+"Mandrake Linux. Hvis dette sker, kan du pr鴙e en tekst-baseret installation "
+"i stedet\n"
+"Dette g鴕es ved at trykke 'F1' ved opstart fra cdrommen, og s skrive 'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Brug Windows partitionen til Loopback"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
+msgid "Armenian (typewriter)"
+msgstr "Armensk (skrivemaskine)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Se info for maskinel"
+msgid "Connection type: "
+msgstr "Type af forbindelse"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s gr鎛sesnit?"
+msgid "Graphical interface"
+msgstr "Grafisk gr鎛seflade"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Har du 閚 til?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s med 3D hardware acceleration"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fandt %s %s gr鎛sesnit"
+msgid "India"
+msgstr "Indien"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Du kan konfigurere hver parameter for modulet her."
+msgid "Chad"
+msgstr "Tchad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "kommaseparerede strenge"
+msgid "Slovakia"
+msgstr "Slovakiet"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "kommaseparerede tal"
+msgid "Singapore"
+msgstr "Singapore"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d kommaseparerede strenge"
+msgid "Cambodia"
+msgstr "Cambodja"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d kommaseparerede tal"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Sk鎟ms vandrette frekvens: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "et tal"
+msgid "Path"
+msgstr "Sti"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Du beh鴙er alcatel mikrokoden.\n"
-"Hjemhent den fra\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"og kopi閞 filen mgmt.o i /usr/share/speedtouch"
+"Her kan du angive en vilk錼lig kommandolinje som jobbet skal kanaliseres ind "
+"i i stedet for at blive sendt direkte til en printer."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"Den mest almindelige m錮e at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger pptp, og nogle f bruger DHCP.\n"
-"Hvis du ikke ved noget, v鎙g 'brug pppoe'"
+"Printsystemet (%s) vil ikke blive startet automatisk, n錼 maskinen startes "
+"op.\n"
+"Det er muligt at den automatiske opstart blev sl錯t fra ved 鎛dring til et "
+"h鴍ere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
+"\n"
+"豱sker du at have den automatiske opstart af printsystemet sl錯t til igen?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Printer %s\n"
+"Hvad 鴑sker du at forandre p, p denne printer?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (der bruger pppoa) usb"
+msgid "Add host"
+msgstr "Tilf鴍 v鎟t"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Hvis du virkelig mener du v閐 hvilken driver der er den rette til dit kort "
+"kan du v鎙ge 閚 fra listen ovenfor.\n"
+"\n"
+"Den aktuelle driver for dit %s-lydkort er \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "brug dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"豱sker du at tillade brugere at eksportere nogle kataloger i deres "
+"hjemmekatalog?\n"
+"Tilladelse af dette vil s鎡te brugere i stand til simpelthen at klikke p "
+"'Fildeling' i konqueror og nautilus.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "brug pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"V鎙g indl鎠 eller gem pakkevalg p diskette.\n"
+"Formatet er det samme som for auto_install-genererede disketter."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "brug pppoe"
+msgid "China (broadcast)"
+msgstr "Kina (broadcast)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Andre porte"
+msgid "Use quota for backup files."
+msgstr "Brug kvoter for sikkerhedskopieringsfiler"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alt (ingen brandmur)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Konfigurerer printer '%s'..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Ugyldig port angivet: %s.\n"
-"Det korrekte format er \"port/tcp\" eller \"port/udp\", \n"
-"hvor port er mellem 1 og 65535."
+msgid "Internet connection"
+msgstr "Internet opkobling"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Du kan angive diverse porte. \n"
-"Gyldige eksempler er: 139/tcp 139/udp.\n"
-"Se /etc/services for information."
+"Indl鎠ning af modul %s mislykkedes.\n"
+"豱sker du at pr鴙e igen med andre parametre?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Hvilke tjenester vil du tillade at Internettet kan koble op med?"
+msgid "Welcome to the Open Source world."
+msgstr "Velkommen til en verden med 錬en kildetekst"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"konfigurering med drakfirewall\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect f鴕 du g錼 videre."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnien-Hercegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"drakfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandrake Linux-maskine.\n"
-"For en st鎟k dedikeret brandmurs-l鴖ning se venligst den specialiserede "
-"MandrakeSecurity Firewall-distribution."
+"Du skal have et rigtigt filsystem (ext2/ext3, reiserfs, xfs eller jfs) til "
+"dette monteringspunkt\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Intet netkort"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Du skal indtaste et v鎟tsnavn eller en IP-adresse.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP- og IMAP-server"
+msgid "Netherlands"
+msgstr "Holland"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Sender filer..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Postserver"
+msgid "Internal ISDN card"
+msgstr "Internt ISDN-kort"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Server for dom鎛enavne (DNS)"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Der findes intet kendt alternativt OSS/ALSA-drivprogram for lydkortet (%s) "
+"som i 鴍eblikket bruger '%s'"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Webserver"
+msgid "Title"
+msgstr "Titel"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf v鎟tsnavn m ikke indeholde et ."
+msgid "Install & convert Fonts"
+msgstr "Install閞 og konvert閞 skrifttyper"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "V鎟tsnavn"
+msgid "WARNING"
+msgstr "ADVARSEL"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf-v鎟tsnavn"
+msgid "Installing bootloader"
+msgstr "Installerer systemopstarter"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Indtast et Zeroconf-v鎟tsnavn uden noget punktum hvis du ikke 鴑sker at "
-"bruge det forvalgte v鎟tsnavn."
+msgid "replay"
+msgstr "afspil igen"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Konfigurerer netv鎟k"
+msgid "detected %s"
+msgstr "Detekteret %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"V鎙g hvilken netv鎟ksadapter du 鴑sker at bruge til at lave forbindelse til "
-"Internettet med."
+msgid "Virgin Islands (U.S.)"
+msgstr "Jomfru鴈rne (USA)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "V鎙g netv鎟ksgr鎛sesnit"
+msgid "Bad backup file"
+msgstr "Fejl i sikkerhedskopien"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Der blev ikke fundet nogen ethernet netv鎟ksadapter p dit system.\n"
-"Kan ikke s鎡te denne forbindelsetype op."
+"Indstilling af deling af internetforbindelse er allerede gjort.\n"
+"Den er de-aktiveret for n鎟v鎟ende\n"
+"Hvad 鴑sker du at g鴕e?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Hvilken DHCP klient 鴑sker du at bruge?\n"
-"Standard er dhcp-client"
+"Indtast IP-adresse og port p v鎟ten, hvis printere du 鴑sker at bruge."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort fundet. V鎙g 閠 i n鎠te sk鎟mbillede."
+msgid "Pipe into command"
+msgstr "kanalis閞 ind i kommando"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. V鎙g et PCI-"
-"kort i n鎠te sk鎟mbillede."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hvilket af de f鴏gende er dit ISDN-kort?"
+"Noget maskinel p din maskine skal bruge ''propriet鎟e'' drivere for at "
+"virke.\n"
+"Du kan finde information om dem hos: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
+msgid "Detecting devices..."
+msgstr "Detekterer enheder..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Afbryd"
+msgid "Click here to launch the wizard ->"
+msgstr "Klik her for at starte vejlederen ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Forts鎡"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Beskrivelse af felterne:\n"
"\n"
-"Hvis du har et ISA kort burde v鎟diene i n鎠te billede v鎟e rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Det ved jeg ikke"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "navnet p CPU'en"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Opfrisker printerdata ..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
+msgid "You must also format %s"
+msgstr "Du skal ogs formatere %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Fandt \"%s\" gr鎛sesnit, 鴑sker du at bruge det?"
+msgid "Be careful: this operation is dangerous."
+msgstr "V鎟 forsigtig: denne operation er farlig."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hvilken protokol 鴑sker du at bruge?"
+msgid "Insert a floppy containing package selection"
+msgstr "Inds鎡 en diskette med pakkevalget"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
+msgid "Security Alerts:"
+msgstr "Sikkerhedsp錷indelser:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Europ鎖sk protokol"
+msgid "Sweden"
+msgstr "Sverige"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Brug Expect for SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"V鎙g din udbyder.\n"
-" Hvis de ikke er i listen, v鎙g Ikke listet"
+msgid "Poland"
+msgstr "Polen"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
+msgid "Importance: %s\n"
+msgstr "Vigtighed: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Mark閞 om du vil udskyde dit b錸d f鴕 sikkerhedskopi laves"
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Hvad slags type er din ISDN-forbindelse?"
+msgid "Other ports"
+msgstr "Andre porte"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Konfigur閞 netv鎟k"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Antal fangningsbuffere for mmap-fangning"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Gammel konfiguration (isdn4net)"
+msgid "SMBus controllers"
+msgstr "SMBus-kontrollers"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Opkoblingens tidsudl鴅 (i sekunder)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Hvilken ISDN-konfigurering foretr鎘ker du?\n"
-"\n"
-"* Den gamle konfiguration bruger isdn4net. Det har st鎟ke\n"
-" v鎟kt鴍er, men det er vanskeligt at konfigurere for en nybegynder,\n"
-" og er ikke standardbaseret.\n"
-"\n"
-"' Det nye konfigurationsv鎟kt鴍 er enklere at forst,\n"
-" mere standardiseret, men med f鎟re v鎟kt鴍er.\n"
-"\n"
-"Vi anbefaler den nye konfiguration.\n"
-"\n"
+"Nogen af de tidlige i486DX-100-chip kan ikke altid returnere til k鴕ende "
+"tilstand efter 'halt'-instruktionen er brugt"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "G鴕 ingenting"
+msgid "Croatian"
+msgstr "Kroatisk"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Install閞 rpm"
+msgid "Use existing partition"
+msgstr "Brug eksisterende partition"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"\"%s\" baseret winmodem opdaget, 鴑sker du at installere kr鎣et programmel?"
+msgid "Unable to contact mirror %s"
+msgstr "Kan ikke kontakte spejl: %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Title"
-msgstr "Titel"
+msgid "/Help/_About..."
+msgstr "/Hj鎙p/_Om..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Dit modem ier ikke underst鴗tet af systemet.\n"
-"Tag og kig p http://www.linmodems.org"
+msgid "Remove user directories before restore."
+msgstr "Fjern brugerkataloger f鴕 genskabning."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Du er ved at konfigurere en ekstern printer. Dette kr鎣er en virkende "
+"netv鎟ksadgang, men dit netv鎟k er endnu ikke konfigureret. Hvis du vil "
+"forts鎡te uden en netv鎟kskonfiguration, vil du ikke kunne bruge printeren "
+"som du konfigurerer nu. Hvordan 鴑sker du at forts鎡te?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "F鴕ste DNS-server (valgfri)"
+msgid "CUPS printer configuration"
+msgstr "Konfiguration af CUPS-printere"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Dom鎛enavn"
+msgid "could not find any font in your mounted partitions"
+msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "F00f-fejl"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skript-baseret"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Hvilken DHCP klient 鴑sker du at bruge?\n"
+"Standard er dhcp-client"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Dom鎛enavn:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Brugernavn"
+msgid "On Floppy"
+msgstr "P diskette"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonnummer"
+msgid "Restore"
+msgstr "Genskab"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Navn p forbindelsen"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"hvis sat til ja, s tjek om netv鎟ksgr鎛sesnittene er fuldst鎛digt 錬ne."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opkaldsindstillinger"
+msgid "Looking for available packages..."
+msgstr "Leder efter tilg鎛gelige pakker"
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv hvilken seriel port dit modem er forbundet til."
+msgid "Init Message"
+msgstr "Init-besked"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Konfigur閞 netv鎟k"
+msgid "Rescue partition table"
+msgstr "Redder partitionstabel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Problemer indtraf under konfigurationen.\n"
-"Afpr鴙 din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
-"virker, kan du pr鴙e at genstarte konfigurationen."
+msgid "Connection complete."
+msgstr "Opkobling fuldf鴕t."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-milj for\n"
-"at undg problemer med det 鎛drede v鎟tsnavn"
+msgid "Cyprus"
+msgstr "Cypern"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Tillykke, netv鎟ks- og internetkonfigurationen er f鎟dig.\n"
-"Konfigurationen vil nu blive anvendt p dit system.\n"
-"\n"
+msgid "Remove from RAID"
+msgstr "Fjern fra RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Et problem opstod ved genstart af netv鎟ket: \n"
-"\n"
-"%s"
+"Denne krypteringsn鴊le er for nem at g鎡te (skal mindst v鎟e p %d tegn)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Netv鎟ket skal v鎟e genstartet. 豱sker du at genstarte det?"
+msgid "Configuration Wizards"
+msgstr "Vejledere til konfiguration"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Netv鎟ks konfiguration"
+msgid "ISDN connection"
+msgstr "ISDN-forbindelse"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "豱sker du at starte din forbindelse ved opstart?"
+msgid "primary"
+msgstr "prim鎟"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internet opkobling"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " p Windows-server \"%s\", deling \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Du har konfigureret flere m錮er at koble dig mod internet p.\n"
-"Venligst v鎙g den du 鴑sker at bruger.\n"
+"Denne dialog bruges til at v鎙ge hvilke tjenester du 鴑sker skal startes ved "
+"opstart af maskinen.\n"
+"\n"
+"DrakX vil pr鎠entere alle de tjenester, som er med i den aktuelle "
+"installation. Gennemse hver enkelt omhyggeligt og v鎙g dem fra som ikke er "
+"n鴇vendige p opstartstidspunktet.\n"
"\n"
+"En kort forklarende tekst om en tjeneste bliver vist n錼 den v鎙ges. Hvis du "
+"ikke er sikker p om en tjeneste er nyttig eller ej, er det dog sikrere at "
+"bruge den foresl錯de opf鴕sel.\n"
+"\n"
+"V鎟 specielt varsom p dette trin hvis du planl鎔ger at bruge maskinen som "
+"server: du vil formentlig 鴑ske ikke at starte nogensomhelst tjeneste op som "
+"du ikke har brug for. Husk at adskillige tjenester kan v鎟e farlige hvis de "
+"er aktiveret p en server. V鎙g som hovedregel kun de tjenester som du "
+"virkelig beh鴙er."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "V鎙g den opkobling, du 鴑sker at konfigurere"
+msgid "Skip"
+msgstr "Spring over"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort detekteret"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktiverer/deaktiverer alle netv鎟ks-kort som er konfigureret\n"
+"til at starte ved opstart"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "Kabelopkobling detekteret"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"CPU-frekvensen i MHz (Megahertz, hvilket som en f鴕ste tiln鎟melse kan groft "
+"regnes som antal instruktioner cpu'en kan udf鴕e per sekund)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
+msgid "important"
+msgstr "vigtigt"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "Detekteret"
+msgid "Total Progress"
+msgstr "Total fremdrift"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX vil f鴕st finde alle IDE-enheder der er tilstede p din maskine. Den "
+"vil ogs lede efter en eller flere PCI SCSI-kort p dit system. Hvis et SCSI-"
+"kort findes, vil DrakX automatisk installere en driver til det.\n"
+"\n"
+"Da maskinelefters鴊ningen ikke er idiotsikker, kan DrakX fejle i at finde "
+"dine diskdrev. I s fald m du angive dit maskinel manuelt.\n"
+"\n"
+"Hvis du m錿te angive dit PCI SCSI-kort manuelt, vil DrakX sp鴕ge om du vil "
+"specificere nogle indstillingsmuligheder for den. Du b鴕 lade DrakX sp鴕ge "
+"udstyret om ops鎡ning af kortspecifikke indstillinger, som er n鴇vendige for "
+"at initialisere kortet. De fleste gange vil DrakX finde ud af dette uden "
+"problemer.\n"
+"\n"
+"Hvis DrakX ikke kan f oplysninger om indstillinger ud af udstyret, som skal "
+"bruges til ops鎡ningen, skal du angive ops鎡ningsinformation til driveren. "
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "Detekteret %s"
+msgid "Users"
+msgstr "Brugere"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem-forbindelse"
+msgid "Preparing bootloader..."
+msgstr "Forbereder opstarter..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "Detekteret p port %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (fx %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normal modemforbindelse"
+msgid "The passwords do not match"
+msgstr "Adgangskoderne stemmer ikke overens"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
+msgid "Examples for correct IPs:\n"
+msgstr "Eksempler p korrekte IP'er:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Eksperttilstand"
+msgid "Frequency (MHz)"
+msgstr "Frekvens (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Brug automatisk detektion"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"For at bruge dette gemte pakkevalg, start installationen op med``linux "
+"defcfg=floppy''"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "V鎙g profilen der skal konfigureres"
+msgid "the number of the processor"
+msgstr "nummeret p processoren"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til Netv鎟kskonfigurations-vejlederen\n"
-"\n"
-"Vi skal til at konfigurere din internet- eller netv鎟ksforbindelse.\n"
-"Hvis du ikke 鴑sker at bruge autodetektering, s frav鎙g afkrydsningsboksen\n"
+msgid "Hardware clock set to GMT"
+msgstr "Maskin-ur sat til GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netv鎟ksinstallation er dit netv鎟k allerede "
-"konfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annull閞 for at "
-"omkonfigurere din Internet- og netv鎟ksforbindelse.\n"
+msgid "Give a file name"
+msgstr "Giv et filnavn"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nu konfigurere opkoblingen '%s'.\n"
-"\n"
-"\n"
-"Tryk OK for at begynde."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Angiv hvilken port din printer er forbundet til."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nu konfigurere opkoblingen '%s'."
+msgid "Change Cd-Rom"
+msgstr "Skift cdrom"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetforbindelse & -konfiguration"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Konfigur閞 forbindelsen"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Der findes intet kendt drivprogram for lydkortet (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Afbryd"
+msgid "force"
+msgstr "tving"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Tilslut"
+msgid "Exit"
+msgstr "Afslut"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Du kan genkonfigurere din forbindelse"
+"Bem鎟k: Afh鎛gig af printermodel og udskriftssystem vil op til %d MB "
+"yderligere programmel blive installeret."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."
+"Du har ingen konfigurerede gr鎛sesnit.\n"
+"Konfigur閞 disse f鴕st ved at klikke p 'Konfigur閞'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Du er ikke forbundet til Internettet nu."
+msgid "Estonian"
+msgstr "Estisk"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
-"forbindelse."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache er en webserver. Den bruges til at betjene HTML-filer og CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Du har forbindelse til Internettet nu."
+msgid "Add/Del Clients"
+msgstr "Tilf鴍/slet klienter"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Url burde begynde med 'ftp:' eller 'http:'"
+msgid "Choose the network interface"
+msgstr "V鎙g netv鎟ksgr鎛sesnit"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy skal v鎟e http://..."
+msgid "Unknown Model"
+msgstr "Ukendt model"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP-proxy"
+msgid "CD/DVD burners"
+msgstr "CD/DVD-br鎛dere"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partition som opstartes som standard\n"
+" (g鎙der kun MS-DOS-opstart, ikke LILO)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemv鎟t (proxy)"
+msgid "choose image"
+msgstr "v鎙g billede"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway-adresse skal have formatet 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "Brandmurkonfiguration fundet!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresse p DNS-server skal have formatet 1.2.3.4"
+msgid "Connection name"
+msgstr "Navn p forbindelsen"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway enhed"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr "antal tegn i tekstrudens x-led"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (fx %s)"
+msgid "Updating package selection"
+msgstr "Opdaterer pakkevalg"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS-server"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Hvor 鴑sker du at montere loopback-filen %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Indtast dom鎛enavn, v鎟tsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit v鎟tsnavn skal v鎟e et fuldt kvalificeret v鎟tsnavn inklusive dom鎛e,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"s lad navne-server-felterne v鎟e blanke."
+"Disketten er blevet genereret.\n"
+"Du kan nu gennemf鴕e installationen igen."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Hastighed b鴕 have endelsen k, M or G (for eksempel, \"11M\" for 11M), eller "
-"tilf鴍 nok '0'."
+msgid "the number of buttons the mouse has"
+msgstr "antal knapper som musen har"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Frek b鴕 have endelsen k, M or G (for eksempel, \"2.46G\" for 2.46 GHz "
-"frekvens), eller tilf鴍 nok '0'."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse b鴕 have formatet 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Start ved opstart"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Tildel v鎟tsnavn fra DHCP-adresse"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Hotplugging af netv鎟k"
+"Indtast kataloget (eller modulet) hvori\n"
+" sikkerhedskopien skal l鎔ges p denne maskine."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "F鴏g id for netv鎟kskort (nyttigt for b鎟bare)"
+msgid "Replay"
+msgstr "Afspil igen"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "DHCP-v鎟tsnavn"
+msgid "Backup other files"
+msgstr "Lav sikkerhedskopi af andre filer"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Netmaske"
+msgid "No floppy drive available"
+msgstr "Intet tilg鎛geligt diskettedrev"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "IP-adresse"
+msgid "Backup files are corrupted"
+msgstr "Sikkerhedskopifiler er 鴇elagte"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Tv-standard:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatisk IP"
+msgid "Cpuid family"
+msgstr "Cpuid-familie"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (drivprogram %s)"
+msgid "32 MB"
+msgstr "32 Mb"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer netv鎟ksenheden %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litauisk AZERTY (ny)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
+"ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-"forbindelse til Internettet.\n"
-"Ved kun at trykke p OK beholder du den nuv鎟ende konfiguration.\n"
-"苙dringer i felterne nedenunder vil overskrive denne konfiguration."
+"Du har valgt en programmeret RAID-partition som rod (/).\n"
+"Ingen systemopstarter kan h錸dtere dette uden en /boot partition.\n"
+"V鎟 sikker p at tilf鴍e en /boot partition"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
+msgid "Previous"
+msgstr "Forrige"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration fundet!"
+msgid "Other OS (MacOS...)"
+msgstr "Andet styresystem (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Adgangskode for konto"
+msgid "To activate the mouse,"
+msgstr "For at aktivere musen,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
+msgid "Bringing up the network"
+msgstr "Bringer netv鎟ket op"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudl鴅 (i sekunder)"
+msgid "Screenshots will be available after install in %s"
+msgstr "豭ebliksbilleder vil v鎟e tilg鎛gelige efter installation i %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Mere end 閚 Microsoft Windows partition er blevet genkendt p dit diskdrev. "
+"V鎙g den som du 鴑sker at 鎛dre st鴕relse p for at kunne installere dit nye "
+"Mandrake Linux operativsystem.\n"
+"\n"
+"Hver partition er listet som f鴏ger: 'Linux navn', 'Windows navn', "
+"'Kapacitet'.\n"
+"\n"
+"'Linux navn' er kodet som f鴏ger: 'drevtype', 'drevnummer', "
+"'partitionsnummer' (for eksempel '/hda1').\n"
+"\n"
+"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
+"SCSI drev.\n"
+"\n"
+"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
+"\n"
+" * 'a' betyder 'hoved-drev p den prim鎟e IDE controller',\n"
+"\n"
+" * 'b' betyder 'slave-drev p den prim鎟e IDE controller',\n"
+"\n"
+" * 'c' betyder 'hoved-drev p den s鎘und鎟e IDE controller',\n"
+"\n"
+" * 'd' betyder 'slave-drev p den s鎘und鎟e IDE controller'.\n"
+"\n"
+"For SCSI drev betyder 'a' det 'f鴕ste drev', 'b' betyder det 'andet drev', "
+"osv.\n"
+"\n"
+"'Windows navn' er det bogstav som dit drev har under Windows (den f鴕ste\n"
+"disk eller partition kaldes 'C:')."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Opringningsm錮e"
+msgid "Tanzania"
+msgstr "Tanzania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "V鎙g dit land"
+msgid "Computing FAT filesystem bounds"
+msgstr "Udregner FAT-filsystemets gr鎛ser"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Kilder for sikkerhedskopi: \n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
+msgid "Content of the file"
+msgstr "Indhold af filen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
+msgid "Authentication LDAP"
+msgstr "Autentificering LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Navn p udbyder (f.eks. udbyder.net)"
+msgid "Let me pick any driver"
+msgstr "Lad mig v鎙ge hvilkensomhelst driver"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
+msgid "Profile "
+msgstr "Profil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kort IO_1"
+msgid "transmitted"
+msgstr "transmitteret"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kort IO_0"
+msgid "Palestine"
+msgstr "Pal鎠tina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Kort IO"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
+msgid "%d comma separated strings"
+msgstr "%d kommaseparerede strenge"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kort IRQ"
+msgid "Here is the full list of keyboards available"
+msgstr "Her er den komplette liste over tilg鎛gelige tastaturer"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller mark閞 feltet nedenunder"
+msgid "Theme name"
+msgstr "Tema-navn"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
+msgid "/_Help"
+msgstr "/_Hj鎙p"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Pr鴙 at omkonfigurere din forbindelse."
+"H鎟 kan du v鎙ge om skannere koblede til denne maskine skal g鴕es "
+"tilg鎛gelige for eksterne maskiner og i s fald p hvilke eksterne maskiner."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
+msgid "the width of the progress bar"
+msgstr "bredden p forl鴅slinjen"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Systemet er nu forbundet til Internettet."
+msgid "Cook Islands"
+msgstr "Cooks 鴈r"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
+msgid "Formatting partition %s"
+msgstr "Formaterer partition %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "豱sker du at fors鴊e at skabe forbindelse til Internettet nu?"
+msgid "Hostname required"
+msgstr "V鎟tsnavn kr鎣et"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet-konfiguration"
+msgid "Unselect fonts installed"
+msgstr "Frav鎙g installerede skrifttyper"
-#: ../../partition_table/raw.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Noget slemt sker p dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt p disken vil ende som tilf鎙dige beskadigede data."
+msgid "Cancel"
+msgstr "Annull閞"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " (Default)"
-msgstr " (Forvalgt)"
+msgid "Searching for configured scanners ..."
+msgstr "S鴊er efter konfigurerede skannere ..."
-#: ../../printer/cups.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "P CUPS-server '%s'"
+msgid "Wheel"
+msgstr "Hjul"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Eksterne printere"
+msgid "Videocard"
+msgstr "Videokort"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on this machine)"
-msgstr "(p denne maskine)"
+msgid "Remove Selected"
+msgstr "Fjern valgte"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(on %s)"
-msgstr "(p %s)"
+msgid "/Autodetect _modems"
+msgstr "/Auto-detekt閞 modemmer"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "Remove printer"
+msgstr "Fjern printer"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ADVARSEL!\n"
+"\n"
+"DrakX vil nu 鎛dre st鴕relsen p din Windows-partition. Udvis forsigtighed: "
+"denne operation er farlig. Hvis du ikke allerede har gjort det, b鴕 du f鴕st "
+"g ud af denne installation, k鴕e scandisk under Windows (og eventuelt "
+"defrag) og s genstarte installationen. Du b鴕 ogs tage en sikkerhedskopi "
+"af dine data. Tryk p Ok, hvis du er helt sikker."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Hvilke tjenester vil du tillade at Internettet kan koble op med?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Velkommen til programmet for postkonfigurering.\n"
+"\n"
+"Her vil du kunne ops鎡te p錷indelsessystemet\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer D鎚on"
+msgid "Other"
+msgstr "Andet"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Default"
+msgstr "Forvalgt"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Button 2 Emulation"
+msgstr "Emulering af knap 2"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown Model"
-msgstr "Ukendt model"
+msgid "type1inst building"
+msgstr "opbyg type1inst"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Ukendt model"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (port %s)"
+msgid "choose image file"
+msgstr "v鎙g billedfil"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host %s"
-msgstr "V鎟t %s"
+msgid "X server"
+msgstr "X-server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Netv鎟k %s"
+msgid "Domain Admin User Name"
+msgstr "Brugernavn for dom鎛eadministrator"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Gr鎛seflade '%s'"
+msgid "There was an error while scanning for TV channels"
+msgstr "Der opstod en fejl ved skanningen efter tv-kanaler"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lokalnetv鎟k"
+msgid "US keyboard (international)"
+msgstr "Amerikansk (internaltionalt)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "R printer (ingen driver)"
+msgid "Not installed"
+msgstr "Ikke installeret"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
+msgid "LAN connection"
+msgstr "Lokalnet-konfiguration"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " p Novell-server \"%s\", printer \"%s\""
+msgid "/File/-"
+msgstr "/Fil/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " p Windows-server \"%s\", deling \"%s\""
+msgid "Italian"
+msgstr "Italiensk"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP v鎟t \"%s\", port %s"
+msgid "Basic"
+msgstr "Basal"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " p LPD-server \"%s\", printer \"%s\""
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+"Ophavsret 2002 MandrakeSoft\n"
+"Stew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", multi-funktions-enhed"
+msgid "pdq"
+msgstr "pdq"
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funktions-enhed p HP JetDirect"
+msgid "Card IO"
+msgstr "Kort IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multi-funktions-enhed p USB"
+msgid "when checked, owner and group won't be changed"
+msgstr "ved kontrol vil ejer og gruppe ikke blive 鎛dret"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", multi-funktions-enhed p parallel port \\#%s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Denne specielle Bootstrap-\n"
+"partition er for at\n"
+"dual-boote dit system.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB printer"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"V鎙g for hvert skridt om det skal v鎟e som under installationen, eller "
+"manuelt"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB printer \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Du kan ogs her bestemme om skannere p eksterne maskiner skal g鴕es "
+"tilg鎛gelige p denne maskine"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " p parallelport \\#%s"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Netv鎟k via FTP.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Lokale printere"
+msgid "Russian (Yawerty)"
+msgstr "Russisk (Yawerty)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "kanalis閞 opgave ind i kommando"
+msgid "You must enter a device or file name!"
+msgstr "Du skal indtaste en enhed eller et filnavn!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Indtast en printerenheds-URI"
+msgid "/_Quit"
+msgstr "/_Afslut"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Printer p en NetWare server"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Du beh鴙er alcatel mikrokoden.\n"
+"Hjemhent den fra\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"og kopi閞 filen mgmt.o i /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer p SMB/Windows 95/98/NT server"
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafik-hukommelse: %s kb\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netv鎟ksprinter (TCP/sokkel)"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Dette program er gratis programmel; du kan redistribuere det og/eller 鎛dre\n"
+"det i henhold til betingelserne i GNU General Public License, som publiceret "
+"af\n"
+"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
+"af licensen.\n"
+"\n"
+"Dette program er udgivet i h錬 om at det vil v鎟e anvendeligt, men\n"
+"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
+"SALGBARHED eller EGNETHED TIL ET BESTEMT FORM臠. Se GNU\n"
+"General Public License for flere detaljer.\n"
+"\n"
+"Du skulle have modtaget en kopi af GNU General Public License\n"
+"sammen med dette program; hvis ikke, skriv til Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
+"USA.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Printer p ekstern lpd server"
+msgid "access to compilation tools"
+msgstr "adgang til overs鎡telsesv鎟kt鴍er"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Printer p ekstern CUPS server"
+msgid "Please select data to restore..."
+msgstr "Udv鎙g de data du vil genskabe..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Ekstern printer"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Hvis du planl鎔ger at bruge Yaboot, skal du huske at efterlade fri plads p錦n"
+"begyndelsen af disken (2048 sektorer skulle v鎟e nok)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Lokal printer"
+msgid "Standard test page"
+msgstr "Standard testside"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Konfigurerer programmer..."
+msgid "Create"
+msgstr "Opret"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "What"
+msgstr "Hvad"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Fjerner printer \"%s\"..."
+msgid "There was an error ordering packages:"
+msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "豱sker du virkelig at fjerne printeren \"%s\"?"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgarsk (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove printer"
-msgstr "Fjern printer"
+msgid "Disable Server"
+msgstr "Deaktiv閞 server"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "L鎟 hvordan denne printer bruges"
+msgid "Filesystem encryption key"
+msgstr "Krypteringsn鴊le for filsystem"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Udskriver testsider"
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org/GIMP.org."
+"V鎙g det f鴕ste tal i 10-omr錮et som du 鴑sker at redigere,\n"
+"Eller tryk retur for at forts鎡te.\n"
+"Dit valg? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org/GIMP.org."
+msgid "Save theme"
+msgstr "gem temaer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Fjerner printer fra Star Office/OpenOffice.org/GIMP.org"
+msgid "group"
+msgstr "gruppe"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Fjern denne printer fra Star Office/OpenOffice.org/GIMP.org"
+msgid "Brazil"
+msgstr "Brasilien"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Kunne ikke tilf鴍e printeren \"%s\" til Star Office/OpenOffice.org/GIMP.org."
+msgid "Auto Install"
+msgstr "Autoinstallation"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Printeren \"%s\" blev tilf鴍et til Star Office/OpenOffice.org/GIMP.org."
+msgid "Network Configuration Wizard"
+msgstr "Konfigur閞 netv鎟k"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Tilf鴍er printer til Star Office/OpenOffice.org/GIMP.org"
+msgid "Removable media automounting"
+msgstr "Automontering af flytbare medier"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Tilf鴍 denne printer til Star Office/OpenOffice.org/GIMP.org"
+msgid "Printing"
+msgstr "Printning"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
+msgid "Unkown driver"
+msgstr "Ukendt drivprogram"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Standard printer"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+"Der blev ikke fundet nogen printere som er direkte tilsluttede til din "
+"maskine"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "S鎡 printeren som standard-printer"
+msgid "Create a new partition"
+msgstr "Opret en ny partition"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Printer-muligheder"
+msgid "Driver:"
+msgstr "Drivprogram:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Printerproducent, model"
+msgid "unknown"
+msgstr "ukendt"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerproducent, model, driver"
+msgid "Use fdisk"
+msgstr "Brug fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Fjerner gammel printer \"%s\"..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "FLYT P HJULET!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Printernavn, beskrivelse, sted"
+msgid "sent: "
+msgstr "sendt: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Printeropkoblingstype"
+msgid "Automatic IP"
+msgstr "Automatisk IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "R printer"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"V鎟sgo'. Installationen en nu f鎟dig og dit GNU/Linux-system er nu klar til "
+"brug. Klik bare '%s' for at genstarte systemet. Den f鴕ste ting, som du "
+"burde se, efter din maskine har lavet sine test af maskinel, er "
+"opstartsmenuen, som giver dig valg af det operativsystem der skal startes.\n"
+"\n"
+"'%s'-knappen viser to ekstra knapper for at:\n"
+"\n"
+" * '%s': for at oprette en installerings- diskette, som automatisk vil "
+"udf鴕e en hel installation uden hj鎙p fra en operat鴕, magen til den "
+"installation du lige har konfigureret.\n"
+"\n"
+" Bem鎟k at to forskellige muligheder er tilstede efter klik p knappen:\n"
+"\n"
+" * '%s': Dette er en delvist automatiseret installering. "
+"Partitioneringstrinnet er den eneste interaktive procedure.\n"
+"\n"
+" * '%s': Fuldautomatisk installering: harddisken bliver fuldst鎛dig "
+"genoverskrevet, alle data forsvinder.\n"
+"\n"
+" Denne facilitet er meget nyttig ved installering af et antal lignende "
+"maskiner. Se afsnittet om autoinstallering p vores websted for yderligere "
+"oplysninger.\n"
+"\n"
+" * '%s'(*): Gemmer en liste med pakkevalget. For at bruge dette pakkevalg i "
+"en anden installation kan disketten inds鎡tes i drevet og installeringen kan "
+"startes. Brug [F1]-tasten p opstartssk鎟men og indtast >>linux defcfg="
+"\"floppy\"<<.\n"
+"\n"
+"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
+"ved at skive \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Do it!"
-msgstr "G鴕 det!"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking-mus"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Close"
-msgstr "Luk"
+msgid "Configuration of a remote printer"
+msgstr "Konfiguration af en ekstern printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Hvad 鴑sker du at forandre p, p denne printer?"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "苙dr printerkonfiguration"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Mark閞 om du vil slette dit b錸d f鴕 sikkerhedskopi laves"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add a new printer"
-msgstr "Tilf鴍 en ny printer"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "En platform p nettet som tilgodes閞 firmaers specifikke supportbehov"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normal udgave"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Url burde begynde med 'ftp:' eller 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Change the printing system"
-msgstr "苙dr printsystemet"
+msgid "Add a new rule at the end"
+msgstr "Tilf鴍 en ny regel i slutningen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS-konfiguration"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"Du kan ogs bestemme her om dine printere p eksterne maskiner b鴕 v鎟e "
+"automatisk tilg鎛gelige p denne maskine."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Opfrisk printerliste (for at vise alle tilg鎛gelige eksterne CUPS-printere)"
+"Du kan nu s鎡te parametre til modulet %s.\n"
+"Parametrene er i formatet ``navn=v鎟di navn2=v鎟di2 ...''.\n"
+"F.eks., ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "V韘 alle tilg鎛gelige eksterne CUPS-printere"
+msgid "Quit without writing the partition table?"
+msgstr "Afslut uden at skrive partitionstabellen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De f鴏gende printere er konfigureret. Dobbeltklik p en printer for at 鎛dre "
-"dens indstillinger, for at g鴕e den til standard-printer, eller for at se "
-"information om den."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Printsystem: "
+msgid "Installing packages..."
+msgstr "Installerer pakker..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
+msgid "Dutch"
+msgstr "Hollandsk"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installerer Foomatic..."
+msgid "The following packages need to be installed:\n"
+msgstr "De f鴏gende pakker beh鴙er at blive installeret\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Kunne ikke konfigurere printer '%s'!"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigurerer printer '%s'..."
+msgid "service setting"
+msgstr "ops鎡ning af tjenester"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "L鎠er printerdata ..."
+msgid "Custom"
+msgstr "Tilpasset"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) 鴑sker du at bruge?"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Filen er allerede brugt af en anden loopback, v鎙g en anden fil"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "V鎙g printerk-behandler"
+msgid "Read-only"
+msgstr "Skrivebeskyttet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "S鎡ter standard printer..."
+msgid "Latvia"
+msgstr "Letland"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Installerer %s..."
+msgid "No known driver"
+msgstr "Ingen kendt driverrutine"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Fjerner %s ..."
+msgid "1 MB"
+msgstr "1 Mb"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, n錼 maskinen startes "
-"op.\n"
-"Det er muligt at den automatiske opstart blev sl錯t fra ved 鎛dring til et "
-"h鴍ere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
-"\n"
-"豱sker du at have den automatiske opstart af printsystemet sl錯t til igen?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
+"Hvis det ikke er den du 鴑sker at ops鎡te s indtast et enhedsnavn/filnavn "
+"p inddatalinjen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Du er ved at installere printsystemet %s p et system k鴕ende p "
-"sikkerhedsniveau %s.\n"
+"Intet lydkort blev genkendt p din maskine. Tjek venligst at et lydkort der "
+"underst鴗tes af Linux er korrekt isat.\n"
"\n"
-"Dette printsystem k鴕er som en d鎚on (baggrundsproces) som venter p "
-"printeropgaver og behandler dem. Denne d鎚on er ogs tilg鎛gelig for "
-"eksterne maskiner via netv鎟ket, og derfor er det et muligt angrebspunkt. "
-"Derfor bliver kun nogle f udvalgte d鎚oner startet op som standard i dette "
-"sikkerhedsniveau.\n"
"\n"
-"豱sker du virkelig at konfigurere udskrivning p denne maskine?"
+"Du kan bes鴊e vores database over udstyr p:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem p sikkerhedsniveauet %s"
+msgid "Configure Local Area Network..."
+msgstr "Konfigur閞 lokalnetv鎟k..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoid"
+msgid "Launch the sound system on your machine"
+msgstr "Start lydsystemet p din maskine"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "h鴍"
+msgid "Preparing printer database..."
+msgstr "Forbereder printerdatabase: ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Genstarter printsystemet ..."
+msgid "Information"
+msgstr "Informationer"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration af en ekstern printer"
+msgid "No network card"
+msgstr "Intet netkort"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Netv鎟ksadgangen k鴕te ikke og kunne ikke startes. Tjek din konfiguration og "
-"dit udstyr. Pr鴙 derefter at konfigurere din eksterne printer igen."
+msgid "Which filesystem do you want?"
+msgstr "Hvilket filsystem 鴑sker du at bruge?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Netv鎟ksops鎡ningen lavet under installationen kan ikke startes nu. Tjek om "
-"netv鎟ket bliver tilg鎛geligt efter opstart af dit system, og ret "
-"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netv鎟k og internet'/ "
-"'Forbindelse', og konfigur閞 derefter printeren ogs med Mandrake "
-"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
+msgid "3 buttons"
+msgstr "3 knapper"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Konfigur閞 netv鎟ket nu"
+msgid "Detailed information"
+msgstr "Detaljeret information"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Forts鎡 med konfigurering af netv鎟k"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette kr鎣er en virkende "
-"netv鎟ksadgang, men dit netv鎟k er endnu ikke konfigureret. Hvis du vil "
-"forts鎡te uden en netv鎟kskonfiguration, vil du ikke kunne bruge printeren "
-"som du konfigurerer nu. Hvordan 鴑sker du at forts鎡te?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Netv鎟ksfunktionalitet ikke konfigureret"
+"Standardprinterens indstillinger\n"
+"\n"
+"Du b鴕 tjekke at sidest鴕relsen og bl鎘typen/udskriftstilstanden (hvis til "
+"stede) og ogs konfigurationen af laserprinterudstyr (hukommelse, duplex-"
+"enhed, ekstra bakker) er sat rigtigt. Bem鎟k at en meget god "
+"udskriftskvalitet kan g鴕e udskriften betydeligt langsommere."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Starter netv鎟k ..."
+msgid "This floppy is not FAT formatted"
+msgstr "Denne diskette er ikke formatteret til FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Opfrisker printerdata ..."
+msgid "Configuring network"
+msgstr "Konfigurerer netv鎟k"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har overf鴕t din tidligere standard-printer '%s', skal den ogs v鎟e "
-"standard-printer under det nye printersystem %s?"
+msgid "Graphic Card"
+msgstr "Grafikkort"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Overf鴕 printerkonfiguration"
+msgid "Resizing Windows partition"
+msgstr "Udregner Windows-filsystemets gr鎛ser"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Overf鴕er %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "Udbyder DNS 1 (valgfri)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nyt printernavn"
+msgid "Cameroon"
+msgstr "Cameroun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Printeren \"%s\" eksisterer allerede,\n"
-"鴑sker du virkelig at overskrive dens konfiguration?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn p printer b鴕 kun indeholde bogstaver, tal og understregen _"
+"Du kan nu partitionere %s.\n"
+"N錼 du er f鎟dig, s husk at gemme med 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Overf鴕"
+msgid "Close"
+msgstr "Luk"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"En printer med navnet \"%s\" eksisterer allerede p %s. \n"
-"Klik \"Overf鴕\" for at overskrive.\n"
-"Du kan ogs give et nyt printernavn, eller overspringe denne printer."
+"'%s': Tjek det aktuelle valg af land. Hvis du ikke er i dette land, s klik "
+"p '%s'-knappen og v鎙g et andet. Hvis dit land ikke er p den f鴕ste liste "
+"der vistes, s klik p '%s'-knappen for at f den komplette liste over lande."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Overf鴕 ikke printere"
+msgid "Calendar"
+msgstr "Kalender"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"V鎙g printerene som du vil overflytte og klik\n"
-"\"Overf鴕\"."
+"Genskab valgt\n"
+"katalogpost"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
-"CUPS egne drivere kan heller ikke overflyttes."
+"For at bruge en ekstern printer, skal du opgive v鎟tsnavnet\n"
+"for printerserveren og navnet p printeren p denne server."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Desuden kan k鴈r lavet med dette program eller \"foomatic -configure\" ikke "
-"overflyttes."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng underst鴗ter ikke IPP printere.\n"
+msgid "consolehelper missing"
+msgstr "konsolhj鎙per mangler"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ underst鴗ter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
-"printere.\n"
+msgid "stopped"
+msgstr "stoppet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS underst鴗ter ikke printere p Novellservere eller printere som sender "
-"dataene ind i en frit-formet kommando.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Om FPU-en har en irq-vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere printerkonfigurationen du har sat op for k鴖erveren %s til %"
-"s, din nuv鎟ende k鴖erver. Al konfigurationsdata (printernavn, beskrivelse, "
-"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
-"opgaver.\n"
-"Ikke alle k鴈r kan overf鴕es p grund af:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Din printer blev konfigureret automatisk til at give dig adgang til fotokort-"
-"drevene fra din PC. Nu kan du f adgang til dine fotokort med det grafiske "
-"program 'MtoolsFM' (Menu: 'Programmer' -> 'Filv鎟kt鴍er' -> 'Mtools "
-"Filadministration') eller kommandolinjev鎟kt鴍et 'mtools' (indtast 'man "
-"mtools' p kommandolinjen for mere information). Du finder kortets filsystem "
-"under drevbogstavet 'p:', eller f鴏gende drevbogstaver hvis du har mere end "
-"閚 HP-printer med fotokortdrev. I 'MtoolsFM' kan du skifte mellem "
-"drevbogstaver med feltet i de 鴙erste h鴍re hj鴕ner af fillisterne."
+msgid "Expand Tree"
+msgstr "Udvid tr"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Din multifunktionsenhed blev konfigureret automatisk til at kunne skanne. Nu "
-"kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive skanneren "
-"hvis du har mere end 閚) fra kommandolinjen eller med de grafiske "
-"gr鎛seflader 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du ogs "
-"skanne ved at v鎙ge det rigtige punkt i menuen 'Filer/Hent'. Brug ogs 'man "
-"scanimage' p kommandolinjen for at f mere information\n"
+"Den gamle \"%s\"-driver er sortlistet.\n"
"\n"
-"Brug ikke \"scannerdrake\" p denne enhed!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Udskriver testsider..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
+"Den er blevet rapporteret at lave fejl i kernen ved afslutningen.\n"
+"\n"
+"Den nye \"%s\"-driver vil f鴕st blive brugt ved n鎠te systemopstart."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver p printeren '%s'"
+msgid "Expert Mode"
+msgstr "Eksperttilstand"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Udskriver/Adgang til fotokort p '%s'"
+msgid "Printer options"
+msgstr "Printer-muligheder"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Udskriver/Skanner p '%s'"
+msgid "Local Network adress"
+msgstr "Adresse p lokalnetv鎟k"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Udskriver/Skanner/Fotokort p '%s'"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Lav sikkerhedkopi af dine systemfiler. (/etc kataloget)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Hvilke muligheder der er for den aktuelle printer kan du enten l鎠e p "
-"listen vist nedenfor, eller klikke p knappen 'Liste med printermuligheder'.%"
-"s%s%s\n"
+"Du har nu mulighed for at hente opdaterede pakker som er blevet opdateret\n"
+"efter distributionen blev gjort tilg鎛gelig.\n"
+"\n"
+"Du vil f sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
+"internet-opkobling for at forts鎡te.\n"
+"\n"
+"豱sker du at installere opdateringerne?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Samba-server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumenter: (arg, alert=1)\n"
"\n"
-"'%s'- og '%s'-kommandoerne tillader ogs 鎛dring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilf鴍 blot de 鴑skede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
+"Aktiv閞/deaktiv閞 beskyttlse mod IP-spoofing."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan ogs bruge den grafiske gr鎛seflade 'xpdq' til at s鎡te "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmilj, har du en 'panik-knap', en ikon p "
-"skrivebordet, ben鎣nt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"鴍eblikkeligt n錼 du klikker p den. Dette er fx nyttigt hvis papiret "
-"kr鴏ler sammen.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australsk Optus kabel-tv"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Denne kommando kan du ogs bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad v鎟e med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
+" <Tab>/<Alt-Tab> mellem elementer | <Space> v鎙ger | <F12> n鎠te sk鎟m "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
+msgid "Subnet:"
+msgstr "Undernet:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"For at f en liste af tilg鎛gelige muligheder for den aktuelle printer kan "
-"du klikke p knappen 'Liste med printermuligheder'."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader ogs 鎛dring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilf鴍 blot de 鴑skede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
+msgid "Please enter the host name or IP."
+msgstr "Indtast v鎟tsnavn eller IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
+msgid "When"
+msgstr "Hvorn錼"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Anden DNS-server (valgfri)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finland"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Her er en liste over tilg鎛gelige printmuligheder for den aktuelle printer:\n"
+"Argumenter: (arg)\n"
"\n"
+"Autoris閞 alle tjenester kontrolleret af tcp_wrappers (se hosts.deny(5)) "
+"hvis \\fIarg\\fP = ALL. Kun de lokale\n"
+"hvis \\fIarg\\fP = LOCAL og ingen hvis \\fIarg\\fP = NONE. For at autorisere "
+"de tjenester du beh鴙er, brug /etc/hosts.allow\n"
+"(se hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du ogs bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad v鎟e med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
+msgid "Color depth: %s\n"
+msgstr "Farvedybde: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
-"programmet '%s <fil>' eller et grafisk printerv鎟kt鴍: 'xpp <fil>' eller "
-"'kprinter <fil>'. De grafiske v鎟kt鴍er lader dig v鎙ge printeren og 鎛dre "
-"indstillingerne p en nem m錮e.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Du kan ikke frav鎙ge denne pakke. Den skal opgraderes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
+msgid "Loading from floppy"
+msgstr "Indl鎠er fra diskette"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid f鴕 printeren starter.\n"
+"Drakperm bruges til at se filer i brug for at rette tilladelser, ejere og "
+"grupper via msec.\n"
+"Du kan ogs redigere dine egne regler som vil tilsides鎡te standard-reglerne."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid f鴕 printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Udskriv ikke nogen testsider"
+msgid "Slovenia"
+msgstr "Slovenien"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Fototestside"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Indtast en bruger\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- PCI- og USB-enheder: dette viser producenten, enheden, underproducent og "
+"underenhed PCI/USB id'er"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
+msgid "ProgressBar color selection"
+msgstr "Valg af farve for forl鴅slinje"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standard testside"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Her er f鴏gende typer indgange.\n"
+"Du kan tilf鴍e flere eller 鎛dre de eksisterende."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Udskriv"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Ingen testsider"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"V鎙g testsiderne du 鴑sker at udskrive.\n"
-"Bem鎟k: fototestsiden kan tage ret lang tid at skrive ud, og p "
-"laserprintere med for lidt hukommelse vil den m錽ke ikke skrives ud i det "
-"hele taget. Som regel vil det v鎟e nok at udskrive standard-testsiden."
+"K鴕er planlagte kommandoer med 'at' kommandoen p tiden specificeret da 'at' "
+"blev k鴕t, og k鴕er batch kommandoer n錼 den gennemsnitlige systembelastning "
+"er lav nok"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testsider"
+msgid "Radio support:"
+msgstr "Radio-underst鴗telse:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"豱sker du fremover at bruge printeren \"%s\"\n"
-"som standard?"
+msgid "Installing SANE packages..."
+msgstr "Installerer SANE-pakker..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor omr錮e!"
+msgid "boot disk creation"
+msgstr "fremstilling af opstartsdiskette"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal v鎟e et tal!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal v鎟e et helt tal!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Standardindstillinger for printer"
+msgid "Change type"
+msgstr "Skift type"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO-installering"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Brug CD/DVDROM til sikkerhedskopiering"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Standardprinterens indstillinger\n"
+"Tillykke, installationen er f鎟dig.\n"
+"Fjern boot-mediet og tryk retur for at genstarte.\n"
"\n"
-"Du b鴕 tjekke at sidest鴕relsen og bl鎘typen/udskriftstilstanden (hvis til "
-"stede) og ogs konfigurationen af laserprinterudstyr (hukommelse, duplex-"
-"enhed, ekstra bakker) er sat rigtigt. Bem鎟k at en meget god "
-"udskriftskvalitet kan g鴕e udskriften betydeligt langsommere."
+"\n"
+"For information om rettelser til denne udgivelse af Mandrake Linux, se "
+"Errata p:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
+"installation i den Officielle Mandrake Linux Brugervejledning."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Opl鎔ning af firmware for HP LaserJet 1000"
+msgid "paranoid"
+msgstr "paranoid"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"For at kunne udskrive p din Lexmark inkjet fra denne konfigurering skal du "
-"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
-"Klik p 'Drivers'-knappen. V鎙g s din model og derefter 'Linux' som "
-"operativsystem. Driverne kommer som RPM-pakker eller skal-skripter med "
-"interaktiv grafisk installation. Du beh鴙er ikke lave denne konfiguration "
-"via de grafiske gr鎛seflader. Annull閞 direkte efter licensaftalen. Udskriv "
-"derefter justeringssider for skrivehovedet med 'lexmarkmaintain', og just閞 "
-"ops鎡ningen af justeringen af hovedet med dette program."
+"Denne kommando kan du ogs bruge fra 'udskrivningskommando'-feltet i "
+"udskriftsdialogerne i mange programmer, men lad v鎟e med at angive filnavnet "
+"her, fordi filen der skal udskrives leveres af programmet.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
+msgid "Resolution"
+msgstr "Opl鴖ning"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark underst鴗ter kun lokale "
-"printere, ikke printere p eksterne maskiner eller printserverbokse. Forbind "
-"din printer til en lokal port eller konfigur閞 den p den maskine, den er "
-"forbundet til."
+"For at skrive til en SMB printer skal du angive v鎟tsnavnet p SMB maskinen "
+"(bem鎟k at dette navn kan v鎟e forskelligt fra TCP/IP-navnet!) og muligvis "
+"IP-adressen p printerserveren, s vel som delenavnet for printeren du vil "
+"bruge samt n鴇vendig information om brugernavn, adgangskode og arbejdsgruppe."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
-"speciel kommunikationsprotokol og derfor virker de kun n錼 de er forbundet "
-"til den f鴕ste parallelle port. N錼 din printer er forbundet til en anden "
-"port eller til en printserverboks, s forbind printeren til den f鴕ste "
-"parallelle port f鴕 du udskriver en pr鴙eside. Ellers vil printeren ikke "
-"virke. Din ops鎡ning af forbindelsestype vil blive ignoreret af driveren."
+"Argumenter: (arg)\n"
+"\n"
+" Accept閞/afvis icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
+msgid "reconfigure"
+msgstr "genkonfigur閞"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Hvis din printer ikke er listet, s v鎙g en kompatibel (se printermanual) "
-"eller en lignende printer."
+"Dit kort kan have 3D acceleration underst鴗telse, men kun med XFree %s,\n"
+"VIGTIGT: Dette er eksperimentelt og kan f din maskine til at l錽e eller g "
+"ned."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Tjek venligst om Printerdrake udf鴕te \n"
-"autodetekteringen af din printermodel\n"
-"korrekt. Find den korrekte model i listen\n"
-"n錼 en forkert model, eller 'R printer' er fremh鎣et."
+msgid "Xinetd Service"
+msgstr "Xinetd-tjeneste"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
+msgid "access to network tools"
+msgstr "adgang til netv鎟ksv鎟kt鴍er"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Opl鎔ning af firmware for HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "L鎠er database over printere ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 giver dig mulighed for at bruge det allernyeste "
+"programmel til at afspille musik, redigere og organisere dine billeder eller "
+"foto, og se videoer."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "V鎙g model manuelt"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Her er en liste med alle autodetekterede printere. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Modellen er korrekt"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Fejl ved installation af aboot, \n"
+"fors鴊 at gennemtvinge installation selv om dette kan 鴇el鎔ge den f鴕ste "
+"partition?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
-"printeren med modellerne listet i dens printerdatabase for at finde den "
-"bedste match. Dette valg kan v鎟e forkert, is鎟 n錼 din printer slet ikke er "
-"listet i databasen. S tjek om valget er korrekt og klik \"Modellen er "
-"korrekt\" hvis den er, og hvis ikke s klik \"V鎙g model manuelt\" s du kan "
-"udv鎙ge din printermodel manuelt p den n鎠te sk鎟m.\n"
+"beskrivelse af valgmuligheder:\n"
"\n"
-"Som din printer har Printerdrake fundet:\n"
+" P dette trin vil Drakbackup lade dig 鎛dre:\n"
+"\n"
+" - Komprimeringsm錮en:\n"
+" \n"
+" Hvis du markerer bzip2-komprimering, vil du komprimere\n"
+" dine data bedre end gzip (omkring 2-10 %%).\n"
+" Denne valgmulighed er ikke markeret som standard fordi\n"
+" denne komprimeringsm錮e kr鎣er mere tid (omkring 1000%% mere).\n"
+" \n"
+" - Opdateringsm錮en:\n"
+"\n"
+" Denne valgmulighed vil opdatere din backup, men denne\n"
+" valgmulighed er ikke rigtigt nyttig fordi du skal\n"
+" dekomprimere din backup f鴕 du kan opdatere den.\n"
+" \n"
+" - M錮en for .backupignore:\n"
+"\n"
+" som med cvs vil Drakbackup ignorere alle referencer\n"
+" indeholdt i .backupignore-filer i hvert katalog.\n"
+" fx: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Din printermodel"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Genskab valgte\n"
+"filer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Forbereder printerdatabase: ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s-eksisterer, skal den fjernes?\n"
+"\n"
+"Advarsel: Hvis du allerede har lavet denne proces skal du nok\n"
+" fjerne indgangen fra authorized_keys p serveren."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Placering"
+msgid "Please fill or check the field below"
+msgstr "Udfyld eller mark閞 feltet nedenunder"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Beskrivelse"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "豱sker du at gemme /etc/fstab-鎛dringerne?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Navn p printer"
+msgid "Boot Protocol"
+msgstr "Opstartsprotokol"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle printere beh鴙er et navn (f.eks. 'printer').\n"
-"Beskrivelsen og lokaliseringsfelterne beh鴙er ikke \n"
-"udfyldes. De er kommentarer til brugerne."
+msgid "LVM-disks %s\n"
+msgstr "LVM-diske %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Indtast printernavn og kommentarer"
+msgid "The package %s is needed. Install it?"
+msgstr "Pakken %s kr鎣es. 豱sker du at installere den?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "G鴕 printerport tilg鎛gelig for CUPS..."
+msgid "On boot"
+msgstr "Ved opstart"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Tjekker enhed og konfigurerer HPOJ..."
+msgid "Bus identification"
+msgstr "Bus-identifikation"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Adgang til fotohukommelseskort p din HP-multifunktionsenhed"
+msgid "Please make a backup of your data first"
+msgstr "Lav gerne en sikkerhedkopi af dine data f鴕st"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanning p din HP-multifunktionsenhed"
+msgid "Vatican"
+msgstr "Vatikansk"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installerer mtools-pakker..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Du har mere end et diskdrev, hvilken 鴑sker du at installere Linux p?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installerer SANE-pakker..."
+msgid "Boot ISO"
+msgstr "Start fra ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ-pakke..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Er din printer en multi-funktionenhed fra HP eller Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner, Sony IJP-V100), en HP "
-"PhotoSmart eller en HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Fjern liste"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "En kommandolinje skal opgives!"
+msgid "A customizable environment"
+msgstr "Et milj der kan tilpasses"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "Kommandolinje"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Her kan du angive en vilk錼lig kommandolinje som jobbet skal kanaliseres ind "
-"i i stedet for at blive sendt direkte til en printer."
+msgid "Morocco"
+msgstr "Marokko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "kanalis閞 ind i kommando"
+msgid "Which printer model do you have?"
+msgstr "Hvilken printermodel har du?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Fandt model: %s %s"
+msgid "Add a new printer"
+msgstr "Tilf鴍 en ny printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
+msgid " All of your selected data have been "
+msgstr " Alle dine valgte data er blevet "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
+msgid "<-- Delete"
+msgstr "<-- Slet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til printeren. URIen skal v鎟e i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bem鎟k at ikke alle typer URIer "
-"underst鴗tes af alle k-behandlere."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu-nummer "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "V鎟tsnavn eller IP-adresse p printer mangler!"
+msgid "chunk size"
+msgstr "enhedsst鴕relse"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret b鴕 v鎟e et heltal!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "kommandoerne f鴕 opstart, eller 'c' for en kommandolinie."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "V鎟tsnavn eller IP-adresse p printer mangler!"
+msgid "Problems installing package %s"
+msgstr "Problemer med installation af %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"For at skrive til en TCP eller sokkel-printer skal du angive v鎟tsnavnet "
-"eller IP-adressen p printeren, og eventuelt portnummer (standard er 9100). "
-"P HP JetDirect-servere er portnummeret normalt 9100, p andre servere "
-"varierer det. Tjek manualen for dit udstyr."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Du vil modtage en advarsel hvis belastningen er h鴍ere end denne v鎟di"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"V鎙g en af de fundne printere fra listen eller angiv v鎟tsnavnet eller IP-"
-"adressen og eventuelt portnummer (standard er 9100) i indtastningsfelterne."
+"\n"
+"\n"
+"For at indsende en fejlrapport klik da p rapport-knappen.\n"
+"Dette vil 錬ne et vindue i en netl鎠er p https://drakbug.mandrakesoft.com\n"
+" hvor du vil finde en formular der kan udfyldes. Informationen vist ovenfor "
+"vil blive overf鴕t til den server\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokkel-printer-parametre"
+msgid "Add a scanner manually"
+msgstr "H錸dpluk skanner"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "V鎟t \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Genindl鎠 partitionstabel"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", v鎟t \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja, jeg 鴑sker automatisk login med denne (bruger, skrivebord)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Skanner netv鎟k ..."
+msgid "Search for fonts in installed list"
+msgstr "S鴊 efter skrifttyper i installeret liste"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Auto-opdagelse af printere"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Lokalnetv鎟ket endte ikke med `.0', st錼 af."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-k鴑avn mangler!"
+msgid "Boot"
+msgstr "Opstart"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
+msgid "Tuner type:"
+msgstr "Tuner-type:"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Printerk-navn"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Nu er det tid til at v鎙ge et udskrivningssystem for din maskine. Andre "
+"styresystemer tilbyder m錽ke 閠, men Mandrake tilbyder to.Printersystemerne "
+"er hver is鎟 bedst til en bestemt konfigurationstype.\n"
+"\n"
+" * '%s' - som betyder 'print, don't queue' (udskriv, k ej), er valget, hvis "
+"du har en direkte forbindelse til din printer, og du 鴑sker at kunne klare "
+"printproblemer med det samme, og du ikke har nogen printere via netv鎟k. ('%"
+"s' vil kun behandle meget simple netv鎟kstilf鎙de, og er lidt sl鴙t p "
+"netv鎟k.) V鎙g 'pdq' hvis dette er din f鴕ste erfaring med GNU/Linux.\n"
+"\n"
+" * '%s' - 'Common Unix Printing System' (F鎙les printersystem for Unix) er "
+"fremragende til at udskrive p din lokale printer, og ogs p den, der st錼 "
+"p den anden side af jordkloden. Det er nemt at konfigurere, og kan virke "
+"som en server eller klient for det bedagede 'lpd'-printsystem, s det er "
+"kompatibelt med de tidligere systemer, som stadig kan have brug for "
+"udskriftstjenester. Det er ganske st鎟kt, men den basale ops鎡ning er n鎠ten "
+"lige s nem som for '%s'. Hvis du har brug for at dette efterligner en 'lpd'-"
+"server, skal du aktivere 'cups-lpd'-d鎚onen. CUPS har grafiske gr鎛seflader "
+"for udskrivning og valg af printermuligheder, og for administration af "
+"printeren.\n"
+"\n"
+"Du kan 鎛dre dit valg senere ved at k鴕e PrinterDrake fra Mandrakes "
+"Kontrolcenter, og klikke p ekspert-knappen."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printer-server"
+msgid "\"Menu\" key"
+msgstr "'Menu'-tast"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet p NetWare "
-"printerserveren (bem鎟k at dette navn kan v鎟e forskelligt fra TCP/IP-"
-"navnet!) s鍁el som k鴑avnet for den printer du vil benytte samt om "
-"n鴇vendigt et brugernavn og en adgangskode."
+"\n"
+"\n"
+"Tjek venligst om Printerdrake udf鴕te \n"
+"autodetekteringen af din printermodel\n"
+"korrekt. Find den korrekte model i listen\n"
+"n錼 en forkert model, eller 'R printer' er fremh鎣et."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
+msgid "Security Administrator:"
+msgstr "Sikkerhedsadministrator:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+msgid "Please enter your login"
+msgstr "Indtast dit brugernavn"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
-"tilslutte sig til den som klienter.\n"
-"\n"
-"豱sker du virkelig at forts鎡te med at ops鎡te din printer som du g鴕 nu?"
+"hvis sat til ja, s tjek rettigheder p filer i brugernes hjemmekataloger."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Ops鎡 din Windows-server til at g鴕e printeren tilg鎛gelig under IPP-"
-"protokollen, og ops鎡 udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
+"Du har ingen internet-opkobling.\n"
+"Opret 閚 f鴕st ved at klikke p 'Konfigur閞'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Kopi af skrifttyper"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatisk"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "豱sker du at afpr鴙e konfigurationen?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org/GIMP.org."
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Du er ved at ops鎡te udskrivning til en Windows-konto med adgangskode. "
-"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
-"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
-"til at sende printjobbet til Windows-serveren. S det er muligt for enhver "
-"bruger p denne maskine at vise adgangskoden p sk鎟men ved at angive "
-"kommandoer som 'ps auxwww'.\n"
+"Standard: Dette er den normale sikkerhed anbefalet for en maskine der vil "
+"blive brugt til at \n"
+" k鴕e p internettet som en klient.\n"
"\n"
-"Vi anbefaler at bruge en af de f鴏gende alternativer (i alle tilf鎙de skal "
-"du forsikre dig om at kun maskiner fra dit lokalnetv鎟k har adgang til din "
-"Windows-server, for eksempel ved hj鎙p af en brandmur):\n"
+"H鴍: Her er en del restriktioner, og flere automatiske kontroller vil "
+"blive k鴕t hver nat.\n"
"\n"
-"Brug en konto uden adgangskode p din Windows-server, s錽om 'GUEST'-kontoen "
-"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
-"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
-"konto.\n"
+"H鴍ere: Sikkerheden er nu h鴍 nok til at bruge systemet som en server som "
+"kan tage imod forbindelser fra mange klienter. Hvis din "
+"maskine kun er en klient p internettet, b鴕 du\n"
+"\t v鎙ge et lavere niveau.\n"
"\n"
-"Ops鎡 din Windows-server s printeren er tilg鎛gelig under LPD-protokollen. "
-"Ops鎡 dern鎠t udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
+"Paranoid: Dette er svarende til det foreg錯nde niveau, men systemet er helt "
+"lukket og\n"
+" sikkerhedsfaciliteter er p deres h鴍este\n"
+"\n"
+"Sikkerhedsadministrator:\n"
+" Hvis 'Sikkerhedsp錷indelser' valgmuligheden er sat, vil "
+"sikkerhedp錷indelser blive sendt til denne bruger (brugernavn eller "
+"epostadresse)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIKKERHEDSADVARSEL!"
+msgid "Save packages selection"
+msgstr "Gem pakke-valg"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
+msgid "Remove the last item"
+msgstr "Fjern det sidste element"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Auto-detekteret"
+msgid "No net boot images created!"
+msgstr "Ingen opstartsbilleder oprettet!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
+msgid "use pptp"
+msgstr "brug pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Dele-navn"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "V鎙g hvilke tjenester der skal startes automatisk ved opstart"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
+msgid "Learn how to use this printer"
+msgstr "L鎟 hvordan denne printer bruges"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-serverv鎟t"
+msgid "Configure the network now"
+msgstr "Konfigur閞 netv鎟ket nu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Hvis den 鴑skede printer blev fundet, s v鎙g den fra listen og tilf鴍 "
-"dern鎠t brugernavn, adgangskode og/eller arbejdsgruppe om n鴇vendigt."
+msgid "Choose a mirror from which to get the packages"
+msgstr "V鎙g det spejl hvorfra pakkerne skal hentes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"For at skrive til en SMB printer skal du angive v鎟tsnavnet p SMB maskinen "
-"(bem鎟k at dette navn kan v鎟e forskelligt fra TCP/IP-navnet!) og muligvis "
-"IP-adressen p printerserveren, s vel som delenavnet for printeren du vil "
-"bruge samt n鴇vendig information om brugernavn, adgangskode og arbejdsgruppe."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Printer \"%s\" p server \"%s\""
+"Programmet til at 鎛dre st鴕relse p FAT kan ikke behandle din partition, \n"
+"den f鴏gende fejl opstod: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", printer \"%s\" p server \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Hvilken sektor 鴑sker du at flytte den til?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Det eksterne v鎟tsnavn mangler!"
+msgid "Do you want to click on this button?"
+msgstr "豱sker du at klikke p denne knap?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Eksternt v鎟tsnavn mangler"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
+msgid "Manual configuration"
+msgstr "Manuel konfiguration"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Eksternt v鎟tsnavn"
+msgid "search"
+msgstr "s鴊"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"For at bruge en ekstern printer, skal du opgive v鎟tsnavnet\n"
-"for printerserveren og navnet p printeren p denne server."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
+"Denne pakke indl鎠er den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
+"keyboard. Dette kan v鎙ges i kbdconfig programmet. Dette b鴕 v鎟e sl錯t til "
+"p de fleste maskiner."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Manuel konfiguration"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installations-sk鎟mdriver)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Du skal v鎙ge eller indtaste en printer/enhed!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zeroconf v鎟tsnavn m ikke indeholde et ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"(parallelporte: /dev/lp0, /dev/lp1 ..., svarende til LPT1:, LPT2: ..., "
-"f鴕ste USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
+"Syslog er en facilitet som mange d鎚oner bruger til log beskeder\n"
+"Det er en god id altid at k鴕e syslog"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Angiv hvilken port din printer er forbundet til."
+msgid "Unknown/Others"
+msgstr "Ukendt|andre"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
-"filnavn p inddatalinjen"
+msgid "No TV Card detected!"
+msgstr "Intet tv-kort genkendt!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Valg"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Angiv hvilken printer som udskriftsopgaverne skal g til."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Printeren '%s' er nu sat som standard-printer."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"V鎙g den printer du 鴑sker at ops鎡te. Konfigurationen af printeren vil ske "
-"fuldst鎛digt automatisk. Hvis din printer ikke blev fundet korrekt eller "
-"hvis du foretr鎘ker en tilpasset printerkonfiguration, s sl 'Manuel "
-"konfiguration' til."
+"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
+"speciel kommunikationsprotokol og derfor virker de kun n錼 de er forbundet "
+"til den f鴕ste parallelle port. N錼 din printer er forbundet til en anden "
+"port eller til en printserverboks, s forbind printeren til den f鴕ste "
+"parallelle port f鴕 du udskriver en pr鴙eside. Ellers vil printeren ikke "
+"virke. Din ops鎡ning af forbindelsestype vil blive ignoreret af driveren."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Her er en liste med alle autodetekterede printere. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Processorens generation ( fx 8 for PentiumIII,...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Der er for n鎟v鎟ende ingen alternative muligheder"
+msgid "Auto-detected"
+msgstr "Auto-detekteret"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Konfigurationen af printeren vil ske helt automatisk. Hvis din printer ikke "
-"blev fundet korrekt eller hvis du foretr鎘ker en tilpasset "
-"printerkonfiguration, s sl 'Manuel konfiguration' til."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "De f鴏gende printere blev fundet automatisk:"
+"Du er ved at konfigurere din maskine til at installere en PXE-server som en "
+"DHCP-server og en TFTP-server for at bygge en installationsserver.\n"
+"Med denne mulighed vil andre maskiner p dit lokale netv鎟k kunne "
+"installeres ved brug af denne maskine.\n"
+"\n"
+"Forsikr dig om at du har konfigureret din internetforbindelse med "
+"drakconnect f鴕 du g錼 videre.\n"
+"\n"
+"Bem鎟k: du skal bruge en dediceret netv鎟ksadapter, for at lave et lokalt "
+"netv鎟k (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Angiv hvilken printer som udskriftsopgaverne skal g til eller indtast et "
-"enhedsnavn/filnavn p inddatalinjen"
+"Det er ikke plads for 1 MB bootstrap! Installationen vil forts鎡te, men for "
+"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12183,1094 +12102,785 @@ msgstr ""
"Angiv hvilken printer dine udskriftsopgaver skal g til, eller indtast et "
"enhedsnavn/filnavn p inddatalinjen"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Alternaltivt kan duangive et enhedsnavn/filnavn p inddatalinjen"
+msgid "Refuse"
+msgstr "N鎔t"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Hvis det ikke er den du 鴑sker at ops鎡te s indtast et enhedsnavn/filnavn "
-"p inddatalinjen"
+"HardDrake k鴕er en s鴊ning efter maskinel, og kan konfigurere nyt/鎛dret "
+"maskinel."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Tilg鎛gelige printer"
+msgid "Remote Printers"
+msgstr "Eksterne printere"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Ingen printer fundet!"
+msgid "Creating and formatting file %s"
+msgstr "Opretter og formaterer fil %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Du skal indtaste en enhed eller et filnavn!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "hvis sat til ja, s tjek tilf鴍elser og fjernelser af sgid-filer."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Ingen lokal printer fundet! For at installere en printer i h錸den skal du "
-"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
-"dev/lp1 ..., svarende til LPT1:, LPT2: ..., f鴕ste USB-printer: /dev/usb/"
-"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
+"HP LaserJet 1000 skal have lagt sin firmware op efter at v鎟e blevet t鎛dt. "
+"Hjemhent pakken med Windows-drivere fra HP's websted (firmwaren fra "
+"printerens CD virker ikke) og hiv firmware-filen ud af den ved at "
+"dekomprimere den selvudpakkende .exe-fil med 'unzip'-programmet og lede "
+"efter filen 'sihp1000.img'. Kopi閞 denne fil til kataloget '/etc/printer'. "
+"D閞 vil den blive fundet af det automatiske opl鎔gerskript og lagt op hver "
+"gang printeren er sluttet til og t鎛dt.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Lokal printer"
+msgid "Choose an existing LVM to add to"
+msgstr "V鎙g en eksisterende LVM som skal udvides"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-printer \\/#%s"
+msgid "xfs restart"
+msgstr "genstart af xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Printer p parallel port \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Printeren \"%s\" eksisterer allerede,\n"
+"鴑sker du virkelig at overskrive dens konfiguration?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Printer '%s' p SMB/Windows server '%s'"
+msgid "No partition available"
+msgstr "ingen ledige partitioner"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netv鎟ksprinter '%s', port %s"
+msgid "Use the scanners on hosts: "
+msgstr "Brug skannerne p f鴏gende v鎟tsmaskiner:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Fandt %s"
+msgid "Unselected All"
+msgstr "Fravalgte alt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", printer \"%s\" p SMB/Windows-server \"%s\""
+msgid "Domain Name Resolver"
+msgstr "L鴖er for dom鎛enavn"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", netv鎟ksprinter \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "Krypteringsn鴊le (igen)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Tillykke, din printer er nu installeret og konfigureret!\n"
-"\n"
-"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
-"menuen).\n"
-"\n"
-"Hvis du 鴑sker at tilf鴍e, fjerne eller omd鴅e en printer, eller hvis du "
-"鴑sker at 鎛dre p standard-indstillingerne (papirbakke, printkvalitet ...), "
-"s v鎙g 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
+msgid "Samba share name missing!"
+msgstr "Samba-delenavn mangler!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Auto-opdagelse af printere tilsluttet maskiner der k鴕e Microsoft Windows"
+msgid "True Type install done"
+msgstr "Installation af True Type f鎟dig"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Auto-opdagelse af printere tilsluttet direkte til det lokale netv鎟k"
+msgid "Detection in progress"
+msgstr "S鴊ning udf鴕es"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Auto-opdagelse af printere tilsluttet denne maskine"
+msgid "Build Whole Kernel -->"
+msgstr "Opbyg hele kernen -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Velkommen til %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Inds鎡 Opdater moduler-disketten i drev %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Opstartssk鎟m"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Den f鴏gende printer\n"
"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, s tilslut og t鎛d dem nu s "
-"de kan identificeres automatisk.\n"
-"\n"
-"Klik p \"N鎠te\" hvis du er klar og p \"Annull閞\" hvis du ikke vil "
-"installere printere nu."
+"%s%s\n"
+"er direkte tilsluttet til dit system"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine eller "
-"direkte til netv鎟ket.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, s tilslut og t鎛d dem nu s "
-"de kan identificeres automatisk. Netv鎟ksprinterne skal ogs v鎟e "
-"tilsluttede og t鎛dte.\n"
-"\n"
-"Bem鎟k at det tager l鎛gere tid at identificere netv鎟ksprintere end at "
-"identificere lokalt tilsluttede printere. S deaktiv閞 autoidentifikation af "
-"netv鎟ksprintere hvis du ikke har brug for dette.\n"
-"\n"
-"Klik p \"N鎠te\" hvis du er klar og p \"Annull閞\" hvis du ikke vil "
-"installere printere nu."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Printerdeling p v鎟t eller netv鎟k:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine, direkte "
-"til netv鎟ket eller til en ekstern Windows-maskine.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, s tilslut og t鎛d dem nu s "
-"de kan identificeres automatisk. Netv鎟ksprinterne og Windows-maskinerne "
-"skal ogs v鎟e tilsluttede og t鎛dte.\n"
-"\n"
-"Bem鎟k at det tager l鎛gere tid at identificere netv鎟ksprintere end at "
-"identificere lokalt tilsluttede printere. S deaktiv閞 autoidentifikation af "
-"netv鎟ksprintere og/eller printere sluttede til Windows-maskiner hvis du "
-"ikke har brug for dette.\n"
-"\n"
-"Klik p \"N鎠te\" hvis du er klar og p \"Annull閞\" hvis du ikke vil "
-"installere printere nu."
+"'%s'-kommandoen tillader ogs 鎛dring af indstillingsmulighederne for et "
+"bestemt udskriftsjob. Tilf鴍 blot de 鴑skede indstillinger til "
+"kommandolinjen, fx '%s <fil>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Velkommen til vejlederen for printerops鎡ning\n"
-"\n"
-"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
-"bruges fra denne maskine, og ogs fra andre maskiner i netv鎟ket.\n"
-"\n"
-"Den sp鴕ger dig om alle n鴇vendige oplysninger til at ops鎡te printere og "
-"giver dig adgang til alle tilg鎛gelige printerdrivere, drivermuligheder og "
-"opkoblingstyper for printere."
+"I nogen tilf鎙de beh鴙er %s driveren at have ekstra information for at "
+"virke\n"
+"ordentligt, selv om den normalt virker fint uden. 豱sker du at angive "
+"ekstra\n"
+"parametre for den eller tillade driveren at sondere din maskine for\n"
+"den information den beh鴙er? Af og til vil sondering stoppe maskinen, men "
+"burde\n"
+"ikke for錼sage nogen skader."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Ikke korrekt cd-etiket. Cd'en har etiket %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Velkommen til v鎟kt鴍et til deling af internetforbindelse!\n"
+"%s\n"
"\n"
-"\n"
-"Printerdrake kunne ikke finde ud af hvilken model din printer %s er. V鎙g "
-"venligst den korrekte model fra listen."
+"Klik p Konfigur閞 for at starte programmet til at dele din "
+"internetforbindelse!"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " p "
+msgid "Searching for new printers..."
+msgstr "S鴊er efter nye printere..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Konfigurerer printer ..."
+msgid " (multi-session)"
+msgstr " (multi-session)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "S鴊er efter nye printere..."
+msgid "Kernel Boot Timeout"
+msgstr "Ventetid f鴕 kerneopstart"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Bem鎟k: Afh鎛gig af printermodel og udskriftssystem vil op til %d MB "
-"yderligere programmel blive installeret."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Er du sikker p at du vil ops鎡te udskrift p denne maskine?\n"
+"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
+"Dit kort er underst鴗tet af XFree %s som kan have bedre underst鴗telse i 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Vil du aktivere udskrift p printerne som n鎣nes ovenfor?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX partitionerings-vejlederen fandt de f鴏gende l鴖ninger:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Vil du aktivere udskrift p printerne i det lokale netv鎟k?\n"
+msgid "Hungarian"
+msgstr "Ungarsk"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Vil du aktivere udskrift p printerne som n鎣nes ovenfor eller p printerne "
-"i det lokale netv鎟k?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Forsikr dig om at alle dine printere er tilsluttede og t鎛dte).\n"
+"V鎙g din udbyder.\n"
+" Hvis de ikke er i listen, v鎙g Ikke listet"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Der blev ikke fundet nogen printere som er direkte tilsluttede til din "
-"maskine"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatisk tidssynkronisering (ved hj鎙p af NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Der findes %d ukendte printere direkte tilsluttet til dit system"
+msgid "8 MB"
+msgstr "8 Mb"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Der findes en ukendt printer direkte tilsluttet til dit system"
+msgid "LDAP Server"
+msgstr "LDAP-server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Den f鴏gende printer\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
+"PCMCIA underst鴗telse er normalt til at underst鴗te ting som ethernet og "
+"modemer p b鎟bare. Den vil ikke blive startet medmindre den er "
+"konfigureret, s det er sikkert at have den installeret p maskiner der ikke "
+"har behov for den."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"De f鴏gende printere\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
+msgid "Choose your country"
+msgstr "V鎙g dit land"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"De f鴏gende printere\n"
"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "og %d ukendte printere"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "og en ukendt printer"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Tjekker dit system..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Genstarter CUPS..."
+"- Systemfiler:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Denne server er allerede p listen, og kan ikke blive tilf鴍et igen.\n"
+msgid "Standalone Tools"
+msgstr "Fritst錯nde v鎟kt鴍er"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Eksempler p korrekte IP'er:\n"
+msgid "Where"
+msgstr "Hvor"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Den indtastede IP er ikke korrekt.\n"
+msgid "but not matching"
+msgstr "Men ikke samstemmende"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Server-IP mangler!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Her kan du v鎙ge et alternativ drivprogram (enten OSS eller ALSA) for "
+"lydkortet (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Hvis ingen port er angivet, vil port 631 blive brugt som standard."
+msgid "Configuring PCMCIA cards..."
+msgstr "Konfigurerer PCMCIA kort..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Indtast IP-adresse og port p v鎟ten, hvis printere du 鴑sker at bruge."
+msgid "kdesu missing"
+msgstr "kdesu mangler"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Tilg錼 printere p eksterne CUPS-servere"
+msgid "Encryption key"
+msgstr "Krypteringsn鴊le"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Fjern valgte server"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Redig閞 valgte server"
+msgid "Christmas Island"
+msgstr "Jule鴈rne"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Tilf鴍 server"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Installation af opstarter mislykkedes. Den f鴏gende fejl opstod:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Tilf鴍 h閞 de CUPS-servere hvis prontere du 鴑sker at bruge. Du beh鴙er kun "
-"g鴕e dette, hvis serverne ikke rundkaster deres printerinformation p "
-"lokalnetv鎟ket."
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI-kanal"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-adresse p v鎟t eller netv鎟k:"
+msgid "Set this printer as the default"
+msgstr "S鎡 printeren som standard-printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Denne v鎟t eller dette netv鎟k er allerede p listen, og kan ikke blive "
-"tilf鴍et igen.\n"
+msgid "partition %s"
+msgstr "partition %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Den indtastede v鎟t/netv鎟k er ikke korrekt.\n"
+msgid "Paranoid"
+msgstr "Paranoid"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "IP-adresse p v鎟t eller netv鎟k mangler."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"V鎙g netv鎟ket eller v鎟ten p hvilken de lokale printere skal g鴕es "
-"tilg鎛gelige: "
+msgid "<-- Del User"
+msgstr "<-- Slet bruger"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Deling af lokale printere"
+msgid "Location on the bus"
+msgstr "Plads p bussen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Fjern valgte v鎟t/netv鎟k"
+msgid "No printer found!"
+msgstr "Ingen printer fundet!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Redig閞 valgte v鎟t/netv鎟k"
+msgid "the vendor name of the device"
+msgstr "navnet p producenten af enheden"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Tilf鴍 v鎟t/netv鎟k"
+msgid "Erase entire disk"
+msgstr "Slet hele disken"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Dette er maskinerne og netv鎟kerne p hvilke de lokalt forbundne printere "
-"skal g鴕es tilg鎛gelige:"
+msgid " (Default)"
+msgstr " (Forvalgt)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"N錼 denne valgmulighed er valgt, vil CUPS hver gang den starter forsikre sig "
-"om at\n"
-"\n"
-"- hvis LPD/LPRng er installeret, vil /etc/printcap ikke overskrives af CUPS\n"
-"\n"
-"- hvis /etc/cups/cupsd.conf mangler, vil den blive oprettet\n"
-"\n"
-"- n錼 printerinformation rundsendes, vil den ikke indeholde \"localhost\" "
-"som servernavn.\n"
+"Argumenter: ()\n"
"\n"
-"Hvis nogen af disse ting giver dig problemer, s fjern denne valgmulighed, "
-"men da m du selv s鴕ge for at disse punkter bliver overholdt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatisk rettelse af CUPS-konfiguration"
+"Hvis SERVER_LEVEL (eller SECURE_LEVEL hvis frav鎟ende) er st鴕re end 3\n"
+"i /etc/security/msec/security.conf, oprettes syml鎛ken /etc/security/msec/"
+"server\n"
+"til at pege til /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/"
+"server\n"
+"bruges af 'chkconfig --add' til at bestemme om en tjeneste skal tilf鴍es "
+"hvis den er til stede i filen under installationen af pakker."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Aktivering af dette vil muligg鴕e udskrift at rene tekstfiler p japansk. "
-"Brug kun denne funktion hvis du virkelig 鴑sker at udskrive tekst p "
-"japansk, hvis det er aktiveret kan du ikke l鎛gere udskrive bogstaver med "
-"accenter i latinske skrifttyper, og du vil ikke kunne tilpasse margenerne, "
-"tegnst鴕relse mv. Denne indstilling vedr鴕er kun printere defineret p denne "
-"maskine. Hvis du 鴑sker at udskrive japansk tekst p en printer der er sat "
-"op p en ekstern maskine, skal du aktivere denne funktion p denne eksterne "
-"maskine."
+msgid "Automatic reconfiguration"
+msgstr "Automatisk rekonfiguration"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Printertilstand for japansk tekst"
+msgid "Receiving Speed:"
+msgstr "Modtagelseshastighed:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"For at f adgang til eksterne CUPS-servere i dit lokale netv鎟k beh鴙er du "
-"bare at aktivere \"Find automatisk tilg鎛gelige printere p eksterne maskiner"
-"\"-valget: CUPS-serverene informerer din maskine automatisk om printerne. "
-"Alle printerne som for 鴍eblikket er kendt af din maskine er listet i "
-"\"Fjern-printere\" sektionen i hovedvinduet til Printerdrake. Hvis din CUPS-"
-"server ikke er i dit lokale netv鎟k, m du indtaste CUPS-servernes IP-"
-"adresser og evt. portnummeret for at f printer-information fra serverne."
+msgid "Turks and Caicos Islands"
+msgstr "Turks- og Caicos鴈rne"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Ingen"
+msgid "permissions"
+msgstr "rettigheder"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Yderligere CUPS-servere: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Ingen ekstern maskine"
+msgid "<- Previous"
+msgstr "<- Forrige"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Tilrettet konfiguration"
+msgid "Internet Connection Sharing configuration"
+msgstr "Konfiguration af deling af internetforbindelse"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printerdeling p v鎟t eller netv鎟k:"
+msgid "Toggle between flat and group sorted"
+msgstr "Skift mellem flad og gruppesorteret"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Find tilg鎛gelige printere p eksterne maskiner automatisk"
+msgid "Themes"
+msgstr "Temaer"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Printerne p denne maskine er tilg鎛gelige for andre maskiner"
+msgid "Options: %s"
+msgstr "Valg: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Du kan ogs bestemme her om dine printere p eksterne maskiner b鴕 v鎟e "
-"automatisk tilg鎛gelige p denne maskine."
+"Du bruger for 鴍eblikket % som opstartsh錸dterer.\n"
+"Klik p Konfigur閞 for at starte ops鎡nings-vejlederen."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Her kan du v鎙ge om printerne sluttet til denne maskine skal v鎟e "
-"tilg鎛gelige fra eksterne maskiner, og fra hvilke eksterne maskiner."
+msgid "OKI winprinter configuration"
+msgstr "OKI konfiguration af winprinter"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Konfiguration af CUPS-printere"
+msgid "Saint Helena"
+msgstr "Sankt Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
-"Automatisk identifikation af printere (Lokal, TCP/Socket og SMB-printere)"
+msgid "Security Level"
+msgstr "Sikkerhedsniveau"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Nogen dele af installationen er ikke f鎟dig\n"
"\n"
-"Eksterne CUPS-servere beh鴙es ikke at blive konfigureret her: \n"
-"disse printere vil automatisk blive fundet."
+"Er du sikker p du 鴑sker du at lukke nu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "V鎙g printer-forbindelse"
+msgid "Polish (qwertz layout)"
+msgstr "Polsk (polsk layout)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"HP LaserJet 1000 skal have lagt sin firmware op efter at v鎟e blevet t鎛dt. "
-"Hjemhent pakken med Windows-drivere fra HP's websted (firmwaren fra "
-"printerens CD virker ikke) og hiv firmware-filen ud af den ved at "
-"dekomprimere den selvudpakkende .exe-fil med 'unzip'-programmet og lede "
-"efter filen 'sihp1000.img'. Kopi閞 denne fil til kataloget '/etc/printer'. "
-"D閞 vil den blive fundet af det automatiske opl鎔gerskript og lagt op hver "
-"gang printeren er sluttet til og t鎛dt.\n"
+msgid "Syria"
+msgstr "Syrien"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumenter: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"S鎡 brugerens umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumenter: (v鎟di)\n"
-"\n"
-"S鎡 skallens tidsudl鴅. En v鎟di p nul betyder intet tidsudl鴅."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Velkommen til %s styresystems-v鎙geren!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumenter: (st鴕relse)\n"
+"V鎙g et styresystem i den ovenst錯nde liste eller\n"
+"vent %d sekunder for at starte standard.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "hvis sat til ja, s tjek tilf鴍elser og fjernelser af sgid-filer."
+msgid "Portuguese"
+msgstr "Portugisisk"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "hvis sat til ja, s tjek 錬ne porte."
+msgid "Loopback file name: "
+msgstr "Loopback-filnavn: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"hvis sat, s send postrapporter til denne postadresse, ellers send dem til "
-"root."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Adresse p DNS-server skal have formatet 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "hvis sat til ja, s rapport閞 kontrolresultat per epost."
+msgid "Serbia"
+msgstr "Serbien"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "hvis sat til ja, s kontroll閞 filer og kataloger skrivbare for alle."
+msgid "Newzealand"
+msgstr "New Zealand"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "hvis sat til ja, s rapport閞 kontrolresultat p tty-en."
+msgid "This directory should remain within the root filesystem"
+msgstr "Dette katalog b鴕 ligge p rod-filsystemet"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "hvis sat til ja, s k鴕 nogle tjek p rpm-databasen."
+msgid "CapsLock key"
+msgstr "CapsLock-tast"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"hvis sat til ja, s tjek om netv鎟ksgr鎛sesnittene er fuldst鎛digt 錬ne."
+msgid "Install bootloader"
+msgstr "Install閞 systemopstarter"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "hvis sat til ja, s k鴕 chkrootkit-kontroller."
+msgid "Select the memory size of your graphics card"
+msgstr "V鎙g hukommelsesm鎛gde for dit grafikkort"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"hvis sat til ja, s tjek rettigheder p filer i brugernes hjemmekataloger."
+"[VALGMULIGHEDER]\n"
+"Program til netv鎟ks- & Internet forbindelse og overv錱ning\n"
+"\n"
+"--defaultintf gr鎛seflade : v韘 denne gr鎛seflade som standard\n"
+"--connect : kobl op til internettet hvis ikke allerede opkoblet\n"
+"--disconnect : kobl fra internettet hvis allerede opkoblet\n"
+"--force : brugt med (dis)connect : gennemtving (dis)connect.\n"
+"--status : returnerer 1 hvis opkoblet, ellers 0; afslut derefter.\n"
+"--quiet : v鎟 ikke interaktiv. Bruges med (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "hvis sat til ja, s tjek tilf鴍elser og fjernelser af suid root-filer."
+msgid "Dynamic IP Address Pool:"
+msgstr "Adresse-rum for ynamisk IP"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "hvis sat til ja, s rapport閞 kontrolresultat til syslog."
+msgid "LVM name?"
+msgstr "LVM-navn?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"hvis sat til ja, s tjek for tomme adgangskoder, for ingen adgangskode i /"
-"etc/shadow eller for andre brugere end root med id = 0."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Nogen enheder i maskinelklassen '%s' blev fjernet:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "hvis sat til ja, s k鴕 de daglige sikkerhedskontroller."
+msgid "Found %s %s interfaces"
+msgstr "Fandt %s %s gr鎛sesnit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "hvis sat til ja, s efterpr鴙 tjeksummer p suid/sgid-filer."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "hvis sat til ja, s tjek for tomme adgangskoder i /etc/shadow."
+msgid "Post Install"
+msgstr "Efterbehandling for installering"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "hvis sat til ja, s rapport閞 filer der ikke er ejede af nogen."
+msgid "The internal domain name"
+msgstr "Det interne dom鎛enavn"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumenter: (umask)\n"
-"\n"
-"S鎡 umask for root."
+msgid "Card IRQ"
+msgstr "Kort IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Argumenter: (l鎛gde, antalcifre=0, antalstore=0)\n"
+"Argumenter: (umask)\n"
"\n"
-"S鎡 mindste l鎛gde for adgangskoder, mindste antal cifre og mindste antal "
-"store bogstaver "
+"S鎡 brugerens umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"S鎡 l鎛gden p adgangskodehistorik for at forhindre genbrug af adgangskoder."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumenter: (max, inaktiv=-1)\n"
-"\n"
-"S鎡 adgangskodefor鎙delse til \\fImax\\fP dage og forsinkelse med 鎛dring "
-"til til \\fIinaktiv\\fP."
+"Skrifttype-import og "
+"overv錱ningsapplikation \n"
+"--windows_import : import閞 fra alle tilg鎛gelige windowspartitioner.\n"
+"--xls_fonts : vis alle skrifttyper som allerede eksisterer fra xls\n"
+"--strong : st鎟k verifikation af skrifttyper.\n"
+"--install : install閞 alle skrifttyper og kataloger.\n"
+"--uninstall : afinstall閞 alle skrifttyper og kataloger.\n"
+"--replace : erstat skrifttyper som eksisterer fra f鴕\n"
+"--application : 0 ingen applikation.\n"
+" : 1 alle tilg鎛gelige underst鴗tede applikationer.\n"
+" : applikationsnavn, som \"so\" for staroffice \n"
+" : og gs for ghostscript."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumenter: (navn)\n"
-"\n"
-"Tilf鴍 navn som en undtagelse for h錸dteringen af adgangskodefor鎙delse af "
-"msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Aktiv閞/deaktiv閞 sulogin(8) p enkeltbrugerniveau."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "V鎙g det diskette-drev, du vil benytte til at lave boot-disketten"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Aktiv閞/deaktiv閞 daglig sikkerhedskontrol."
+msgid "LILO with text menu"
+msgstr "LILO med tekstmenu"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktiv閞/deaktiv閞 錬enhedstjek p ethernetkort."
+msgid "Everything (no firewall)"
+msgstr "Alt (ingen brandmur)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Brug adgangskode til at autentificere brugere."
+msgid "You must specify a kernel image"
+msgstr "Du skal angive en kerne-fil"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
-"enhver bruger."
+msgid ", multi-function device on USB"
+msgstr ", multi-funktions-enhed p USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktiv閞/deaktiv閞 msec timevise sikkerhedskontrol."
+msgid "Do"
+msgstr "Lav"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktiv閞/deaktiv閞 logning af IPv4 m鎟kelige pakker."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Kontakter spejlet for at hente listen af tilg鎛gelige pakker"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktiv閞/deaktiv閞 libsafe hvis libsafe findes p systemet."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litauisk AZERTY (gammel)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumenter: (arg, alert=1)\n"
-"\n"
-"Aktiv閞/deaktiv閞 beskyttlse mod IP-spoofing."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiliansk (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumenter: (arg, alert=1)\n"
-"\n"
-"Aktiv閞/deaktiv閞 beskyttelse mod spoofning af navneopslag. Hvis\n"
-"\\fIalert\\fP er sand rapporteres ogs til syslog."
+msgid "IP address of host/network:"
+msgstr "IP-adresse p v鎟t eller netv鎟k:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumenter: (arg, udtryk='*.*', dev='tty12')\n"
-"\n"
-"Aktiv閞/deaktiv閞 syslog-rapporter til konsol 12. \\fIudtryk\\fP er\n"
-"udtrykket der beskriver hvad der skal logges (se syslog.conf(5) for flere "
-"detaljer) og\n"
-"'dev' enheden som loggen skal rapporteres p."
+"y-koordinatet for forl鴅sindikatorens\n"
+"鴙re venstre hj鴕ne"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Aktiv閞/deaktiv閞 'crontab' og 'at' for brugere. Put tilladte brugere i /etc/"
-"cron.allow og /etc/at.allow\n"
-"(se man at(1) og crontab(1))."
+msgid "System installation"
+msgstr "System-installering"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumenter: ()\n"
-"\n"
-"Hvis SERVER_LEVEL (eller SECURE_LEVEL hvis frav鎟ende) er st鴕re end 3\n"
-"i /etc/security/msec/security.conf, oprettes syml鎛ken /etc/security/msec/"
-"server\n"
-"til at pege til /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/"
-"server\n"
-"bruges af 'chkconfig --add' til at bestemme om en tjeneste skal tilf鴍es "
-"hvis den er til stede i filen under installationen af pakker."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Sankt Vincent og Grenadinerne"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Autoris閞 alle tjenester kontrolleret af tcp_wrappers (se hosts.deny(5)) "
-"hvis \\fIarg\\fP = ALL. Kun de lokale\n"
-"hvis \\fIarg\\fP = LOCAL og ingen hvis \\fIarg\\fP = NONE. For at autorisere "
-"de tjenester du beh鴙er, brug /etc/hosts.allow\n"
-"(se hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Fil/_舃n"
#: ../../security/help.pm:1
#, c-format
@@ -13285,1082 +12895,816 @@ msgstr ""
"Argumentet angiver om klienter er autoriseret til at koble op til X-serveren "
"p tcp-port 6000 eller ej."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumenter: (arg, listen_tcp=None)\n"
-"\n"
-"Tillad/forbyd X-forbindelser. F鴕ste argangiver hvad der g鴕es\n"
-"p klientsiden: ALL (alle forbindelser er tilladt), LOCAL (kun\n"
-"lokale forbidelser) og NONE (ingen forbindelser)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd listen af brugere p systemet p sk鎟mh錸dteringer (kdm og "
-"gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd direkte root-logind."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd ekstern root-logind."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd genstart via konsolbruger."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Hvis \\fIarg\\fP = ALL tillades /etc/issue og /etc/issue.net at eksistere. "
-"Hvis \\fIarg\\fP = NONE er ingen problemer tilladt \n"
-"ellers er kun /etc/issue tilladt."
+msgid "Location of auto_install.cfg file"
+msgstr "Placering af auto_installations .cfg-fil"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Tillad/forbyd autologind."
+msgid "Open Firmware Delay"
+msgstr "舃en firmwareforsinkelse"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Accept閞/afvis icmp echo."
+msgid "Hungary"
+msgstr "Ungarn"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-" Accept閞/afvis rundkastet icmp echo."
+msgid "Total progess"
+msgstr "Total fremdrift"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumenter: (arg)\n"
-"\n"
-"Accept閞/afvis falske IPv4-fejlmeddelelser."
+msgid "Color configuration"
+msgstr "Farve-konfiguration"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sikkerhedsadministrator (brugernavne eller e-post)"
+msgid "New Zealand"
+msgstr "New Zealand"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverl鴅 og formatstrenge."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
+"Der er allerede nogle begr鎛sninger, og flere automatiske kontroller bliver "
+"k鴕t hver nat."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "V鎙g det 鴑skede sikkerhedniveau"
+msgid "please choose the date to restore"
+msgstr "V鎙g dato for genskabning"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Basale valgmuligheder for DrakSec"
+msgid "Switching from ext2 to ext3"
+msgstr "Skifter fra ext2 til ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Baseret p det foreg錯nde niveau, men systemet er nu helt lukket.\n"
-"Sikkerhedsfaciliteterne er nu p deres h鴍este niveau."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Med dette sikkerhedsniveau kan brug som server komme p tale.\n"
-"Sikkerheden er nu h鴍 nok til at systemet kan bruges som server som tillader "
-"forbindelser fra mange klienter. Bem鎟k: hvis din maskine kun er en klient "
-"p internettet b鴕 du hellere v鎙ge et lavere niveau."
+msgid "Netherlands Antilles"
+msgstr "Hollandske Antiller"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Der er allerede nogle begr鎛sninger, og flere automatiske kontroller bliver "
-"k鴕t hver nat."
+msgid "Browse to new restore repository."
+msgstr "Bladr til nyt genskabelseslager."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine\n"
-" med forbindelse til Internettet som klient. "
+"\n"
+"Velkommen til vejlederen for printerops鎡ning\n"
+"\n"
+"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
+"bruges fra denne maskine, og ogs fra andre maskiner i netv鎟ket.\n"
+"\n"
+"Den sp鴕ger dig om alle n鴇vendige oplysninger til at ops鎡te printere og "
+"giver dig adgang til alle tilg鎛gelige printerdrivere, drivermuligheder og "
+"opkoblingstyper for printere."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netv鎟ksmaskine er "
-"stadig ikke anbefalet."
+msgid "and %d unknown printers"
+msgstr "og %d ukendte printere"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Dette niveau skal bruges med omtanke. Det g鴕 dit system nemmere at bruge, "
-"men er meget s錼bart: det m ikke bruges til en maskine der er i et netv鎟k "
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
+"Tidlige Intel Pentium chips har en bug i deres flydendetalsprocessor, "
+"hvilket g鴕 at de ikke kan lave den kr鎣ede precision n錼 de udf鴕er en "
+"flydendetalsdivision (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Ingen ISDN PCI-kort fundet. V鎙g 閠 i n鎠te sk鎟mbillede."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "H鴍ere"
+msgid "GB"
+msgstr "Gb"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "H鴍"
+msgid "Please give a user name"
+msgstr "Indtast et brugernavn"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Ringe"
+msgid "Enable CD Boot?"
+msgstr "Skal det v鎟e muligt at starte fra CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
+msgid " enter `void' for void entry"
+msgstr " indtast 'void' for tom indgang"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Log ind i %s igen for at aktivere 鎛dringerne"
+msgid "on Hard Drive"
+msgstr "p diskdrev"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log ud og tryk herefter p Ctrl-Alt-Bak"
+msgid "Winmodem connection"
+msgstr "Winmodem-forbindelse"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke 鎛dret"
+"\n"
+"Tillykke, din printer er nu installeret og konfigureret!\n"
+"\n"
+"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
+"menuen).\n"
+"\n"
+"Hvis du 鴑sker at tilf鴍e, fjerne eller omd鴅e en printer, eller hvis du "
+"鴑sker at 鎛dre p standard-indstillingerne (papirbakke, printkvalitet ...), "
+"s v鎙g 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Skal oprette /etc/dhcpd.conf f鴕st!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"S鎡 l鎛gden p adgangskodehistorik for at forhindre genbrug af adgangskoder."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Noget gik galt! - er mkisofs installeret?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nu kan du k鴕e xawtv (under X Window!)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO-aftryk er %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Ikke nok swap-plads til at gennemf鴕e installationen, tilf鴍 mere"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Intet tilg鎛geligt diskettedrev!"
+msgid "%s on %s"
+msgstr "%s p %s"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Diskette kan fjernes nu"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux h錸dterer tiden i GMT (Greenwich Mean Time) og overs鎡ter den til "
+"lokal tid if鴏ge den tidszone du har valgt. Hvis uret p bundkortet er sat "
+"til lokal tid, kan du deaktivere dette ved at frav鎙ge '%s', hvilket vil "
+"lade GNU/Linux vide at systemuret og maskinens ur er i samme tidszone. Dette "
+"er nyttigt n錼 maskinen ogs bruges til andre operativsystemer som Windows.\n"
+"\n"
+"Muligheden '%s' vil automatisk tilpasse uret ved at forbinde til en ekstern "
+"tidsserver p internettet. For at denne facilitet kan virke, skal du have en "
+"fungerende internetforbindelse. Det er bedst at v鎙ge en tidsserver med en "
+"placering n鎟 ved dig. Denne mulighed installerer faktisk en tidsserver som "
+"ogs kan bruges af andre maskiner p dit lokalnetv鎟k."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Kunne ikke f adgang til disketten!"
+msgid "Which is your timezone?"
+msgstr "Hvad er din tidszone?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Inds鎡 diskette:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Udskriv konfiguration"
+msgid "The system is now connected to the Internet."
+msgstr "Systemet er nu forbundet til Internettet."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Adresse-rum for ynamisk IP"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Syd-Georgia og Syd-Sandwich-鴈rne"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"De fleste af disse v鎟dier blev fundet\n"
-"fra dit k鴕ende system.\n"
-"Du kan 鎛dre dem efter behov."
+msgid "Japan (broadcast)"
+msgstr "Japan (broadcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Konfiguration af dhcp-server"
+msgid "Mozambique"
+msgstr "Mocambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Slut p IP-omr錮e:"
+msgid "Icon"
+msgstr "Ikon"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Start p IP-omr錮e:"
+msgid "Please choose what you want to backup"
+msgstr "V鎙g hvad du vil sikkerhedkopiere"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Navne-servere:"
+msgid "256 colors (8 bits)"
+msgstr "256 farver (8 bit)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Dom鎛enavn:"
+msgid "Read-write"
+msgstr "L鎠-skriv"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Rundkastningsadresse:"
+msgid "Size: %s\n"
+msgstr "St鴕relse: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Undernetmaske:"
+msgid "Hostname: "
+msgstr "V鎟tsnavn: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Rutere:"
+msgid "Chunk size %s\n"
+msgstr "Enhedsst鴕relse %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Netmaske:"
+msgid "Build the future of Linux!"
+msgstr "Byg fremtiden for Linux!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Undernet:"
+msgid "Local Printer"
+msgstr "Lokal printer"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Skal genstarte Display Manager for at de fulde 鎛dringer kan tage effekt. \n"
-"(service dm restart - fra konsollen)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigur閞 dhcpd..."
+" Copyright (C) 2001-2002 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Slet klient"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=minfil] [--word=mitord] [--explain=regudtryk] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Redig閞 klient"
+msgid "ADSL connection"
+msgstr "ADSL opkobling"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Tilf鴍 klient -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Ingen konfiguration, klik p Vejleder eller Avanceret.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Tillad tynde klienter"
+msgid "Error!"
+msgstr "Fejl!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Tynd klient"
+msgid "cable connection detected"
+msgstr "Kabelopkobling detekteret"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Ingen opstartsbilleder oprettet!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Adgang n鎔tet ved overf鴕sel af %s til %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "type: %s"
+msgid "/_Report Bug"
+msgstr "/_Rapport閞 fejl"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Slet bruger"
+msgid "Resize"
+msgstr "St鴕relses鎛dring"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Tilf鴍 bruger -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Indikere at adgangskoden i systemets database er forskelligt fra\n"
-" den i TerminalServer-databasen.\n"
-"Slet/tilf鴍 brugeren igen il TerminalServeren for at muligg鴕e logind."
+msgid "Please enter the device name to use for backup"
+msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Slet alle NBI'er"
+msgid "Resolution: %s\n"
+msgstr "Opl鴖ninger %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Slet"
+msgid "matching"
+msgstr "Samstemmende:"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Dette vil tage nogle f minutter."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Kunne ikke f adgang til kernemoduler svarende til din kerne (fil %s "
+"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
+"med installationsmediet (lav en nyere opstartsdiskette)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Byg alle kerner -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"V鎙g den rigtige port. For eksempel er navnet for COM1-porten under MS "
+"Windows 'ttyS0' under GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Ingen NIC valgt!"
+msgid "The following packages are going to be removed"
+msgstr "De f鴏gende pakker vil blive afinstalleret"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Byg enkel NIC -->"
+msgid "Connect to the Internet"
+msgstr "Lav forbindelse til Internettet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Ingen kerne valgt!"
+msgid "Use existing partitions"
+msgstr "Brug eksisterende partition"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Opbyg hele kernen -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadisk (Qu閎ec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Start fra ISO"
+msgid "Mouse device: %s\n"
+msgstr "Muse-enhed: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Start fra diskette"
+msgid "Reselect correct fonts"
+msgstr "Genv鎙g korrekte skrifttyper"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"Options Description:\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"drakTermServ-oversigt\n"
-"\t\t\t \n"
-" - Lav Etherboot-aktiverede opstartsaftryksfiler:\n"
-" \t\tFor at starte med en kerne via etherboot skal en speciel kerne/"
-"initrd-aftryksfil oprettes.\n"
-" \t\tmkinitrd-net laver meget af dette arbejde og drakTermServ er "
-"bare en grafisk gr鎛seflade\n"
-" \t\tfor at hj鎙pe til med at h錸dtere/鎛dre p disse aftryksfiler.\n"
-"\n"
-" - Vedligeholdelse af /etc/dhcpd.conf:\n"
-" \t\tFor at starte klientene over netv鎟k beh鴙er hver klient en "
-"indgang i dhcpd.conf, som udleverer en IP-adresse\n"
-" \t\tog netv鎟ksopstart-aftryksfiler til maskinen. drakTermServ "
-"hj鎙per til med at lave/fjerne disse indgange.\n"
-"\t\t\t\n"
-" \t\t(PCI-kort kan undlade aftryksfilen - etherboot vil eftersp鴕ge "
-"den rigtige aftryksfil. Du b鴕\n"
-" \t\togs bem鎟ke at n錼 etherboot ser efter aftryksfilerne forventer "
-"den navne som\n"
-" \t\tboot-3c59x.nbi, fremfor boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tEt typisk dhcpd.conf-afsnit for at underst鴗te diskl鴖e klienter "
-"ser s錮an ud:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tMens du kan bruge en p鴏 af IP-adresser, fremfor at ops鎡te en "
-"specifik ops鎡ningsindgang for\n"
-"\t\t\ten klientmaskine, vil brug af faste adresser lette\n"
-"brugen\n"
-"\t\t\taf klientspecifikke konfigurationsfiler som ClusterNFS tilbyder.\n"
-"\t\t\t\n"
-"\t\t\tBem鎟k: \"#type\"-indgangen er kun brugt af drakTermServ. Klienter "
-"kan enten v鎟e \"tynde\"\n"
-"\t\t\teller 'tykke'. Tynde klienter k鴕er st鴕steparten af programmellet "
-"via xdmcp, mens tykke klienter k鴕er st鴕steparten\n"
-"af programmellet p klientmaskinen. En speciel inttab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ bliver\n"
-"\t\t\tskrevet for tynde klienter. Systemkonfigurationsfilerne xdm-config, "
-"kdmrc, og gdm.conf bliver 鎛drede\n"
-"\t\t\thvis tynde klienter bliver brugt, for at aktivere xdmcp. Idet der er "
-"sikkerhedsproblematik omkring brugen af xdmcp,\n"
-"\t\t\ts bliver hosts.deny og hosts.allow 鎛dret for at begr鎛se adgangen "
-"til det lokale subnet.\n"
-"\t\t\t\n"
-"\t\t\tBem鎟k: Du skal stoppe/starte serveren efter at have tilf鴍et eller "
-"鎛dret klienter.\n"
-"\t\t\t\n"
-" - Vedligeholdelse af /etc/exports:\n"
-" \t\tClusternfs lader dig eksportere rod-filsystemet til diskl鴖e "
-"klienter, drakTermServ\n"
-" \t\tops鎡ter de rigtige indgange for at tillade anonym adgang til "
-"rod-filsystemet fra\n"
-" \t\tdiskl鴖e klienter.\n"
-"\n"
-" \t\tEn typisk eksporterings-indgang for clusternfs er:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASKE(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tHvor SUBNET/MASKE bliver defineret for dit netv鎟k.\n"
-" \t\t\n"
-" - Vedligeholdelse af /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor at brugere skal kunne logge ind p systemet fra en diskl鴖 "
-"klient, s m deres indgang i\n"
-" \t\t/etc/shadow kopieres ind i /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ hj鎙per til\n"
-" \t\tved at tilf鴍e og slette brugere fra denne fil.\n"
-"\n"
-" - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tVia clusternfs kan hver diskl鴖 klient have deres egen unikke "
-"konfigurationsfil\n"
-" \t\tp rod-filsystemet p serveren. I fremtiden vil drakTermServ "
-"kunne hj鎙pe til med at lave disse\n"
-" \t\tfiler.\n"
-"\n"
-" - Per klient systemkonfigurationsfiler:\n"
-" \t\tVia clusternfs kan hver diskl鴖 klient have deres egne unikke "
-"konfigurationsfiler\n"
-" \t\tp rod-filesystemet p serveren. I fremtiden vil drakTermServ "
-"kunne hj鎙pe til med at oprette disse filer\n"
-" \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
-"sysconfig/keyboard p per klient\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ vil konfigurere denne fil til at virke sammen med "
-"aftryksfilerne som bliver oprettet af\n"
-" \t\tmkinitrd-net, og indgangene i /etc/dhcpd.conf, for at udlevere "
-"netv鎟ks-opstartsaftryksfilerne til hver \n"
-" \t\tdiskl鴖 klient.\n"
-"\n"
-" \t\tEn typisk tftp-konfigurationsfil ser s錮an ud:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\t苙dringen her fra den normale installation er 鎛dringen af "
-"disable-flaget til\n"
-" \t\t'no' og 鎛dring af filstien til /var/lib/tftpboot, hvor mkinitrd-"
-"net\n"
-" \t\tplacere sine aftryksfiler.\n"
+"beskrivelse af valgmuligheder:\n"
"\n"
-" - Opret etherboot-disketter/CD'er:\n"
-" \t\tDe diskl鴖e klientmaskiner beh鴙er enten ROM aftryksfiler p "
-"netv鎟kskortet, en opstartsdiskette\n"
-" \t\teller en CD for at initiere opstartssekvensen. drakTermServ vil "
-"hj鎙pe til med generere disse aftryksfiler,\n"
-" \t\tbaseret p netv鎟kskortet i klientmaskinen.\n"
-" \t\t\n"
-" \t\tEt basiseksempel p oprettelse af en opstartsdiskette for 3Com "
-"3c509 manuelt:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"V鎟 forsigtig n錼 du bruger ftp-backup, fordi kun \n"
+"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
+"S for 鴍eblikket skal du bygge sikkerhedskopien p din disk \n"
+"f鴕 den sendes til ftp-serveren.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Til sidst valgmulighederne\n"
"\n"
-"\n"
-" Tak til:\n"
-"\t- LTSP-projektet http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"H閞 kan du v鎙ge om du 鴑sker automatisk at skifte til en grafisk "
+"gr鎛seflade ved opstart. Selvf鴏gelig vil du 鴑ske at svare '%s', hvis din "
+"maskine skal bruges som server, eller hvis ikke lykkedes dig at f sk鎟men "
+"konfigureret."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-"Ophavsret 2002 MandrakeSoft\n"
-"Stew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Vi skal nu konfigurere opkoblingen '%s'."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Tilf鴍/slet klienter"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert for firmaer"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Tilf鴍/slet brugere"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] sk鎟m\n"
+" XFdrake opl鴖ning"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Auto-opdagelse af printere"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Kunne ikke finde nogen skrifttyper.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Opstartsbilleder for netopstart"
+msgid "Language"
+msgstr "V鎙g sprog"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot diskette/ISO"
+msgid "Printer model selection"
+msgstr "Valg af printermodel"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Stop server"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter type-鎛dring af partition %s vil alle data p denne partition g tabt"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Start server"
+msgid "%d seconds"
+msgstr "%d sekunder"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Deaktiv閞 server"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Inds鎡 en tom diskette i drev %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Aktiv閞 server"
+msgid "A valid URI must be entered!"
+msgstr "En korrekt URI skal opgives!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Konfiguration af Mandrake Terminalserver"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Fandt \"%s\" gr鎛sesnit, 鴑sker du at bruge det?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Fjern det sidste element"
+msgid "Re-configure interface and DHCP server"
+msgstr "Rekonfigur閞 gr鎛sesnit og DHCP-server"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Tilf鴍 et element"
+msgid "Sound configuration"
+msgstr "Lyd-konfiguration"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Autoinstallation"
+msgid "Photo test page"
+msgstr "Fototestside"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemf鴕e installationen igen."
+msgid "Custom disk partitioning"
+msgstr "Brugerdefineret disk-opdeling"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Tillykke!"
+msgid "Enter Printer Name and Comments"
+msgstr "Indtast printernavn og kommentarer"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"De f鴏gende printere\n"
"\n"
-"Velkommen.\n"
-"\n"
-"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
+"%s%s\n"
+"er direkte tilsluttet til dit system"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
+msgid "type: %s"
+msgstr "type: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "manuel"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovakisk (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"V鎙g for hvert skridt om det skal v鎟e som under installationen, eller "
-"manuelt"
+msgid "No Sound Card detected!"
+msgstr "Intet lydkort genkendt!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
+msgid "Mouse Port"
+msgstr "Muse-port"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "afspil igen"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Skal genstarte Display Manager for at de fulde 鎛dringer kan tage effekt. \n"
+"(service dm restart - fra konsollen)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "FTP-server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og m bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne k鴕e installationen du gennemf鴕te p "
-"denne maskine, med muligheden for at selv kunne 鎛dre p nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemf鴕t automatisk, uanset hvad du valgte under installationen.\n"
+"Argumenter: (arg)\n"
"\n"
-"豱sker du at forts鎡te?"
+"Aktiv閞/deaktiv閞 msec timevise sikkerhedskontrol."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "Konvertering af pfm-skrifttyper"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg beh鴙er."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Bustypen som musen er forbundet til"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Fejl!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Argumenter: (st鴕relse)\n"
"\n"
-"Problemer med genskabelse af sikkerhedskopier:\n"
-"\n"
-"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
-"backupfiler f鴕 genskabelse af dem.\n"
-"F鴕 genskabelsen vil Drakbackup fjerne \n"
-"dit nuv鎟ende katalog, og alle dine data vil g tabt.\n"
-"Det er vigtigt at v鎟e forsigtig og ikke 鎛dre sikkerhedskopieringens\n"
-"datafiler i h錸den.\n"
+"Set shell commands history size. A value of -1 means unlimited."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"V鎟 forsigtig n錼 du bruger ftp-backup, fordi kun \n"
-"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
-"S for 鴍eblikket skal du bygge sikkerhedskopien p din disk \n"
-"f鴕 den sendes til ftp-serveren.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Beskrivelse:\n"
+"Som en opsummering vil DrakX give dig en oversigt over information\n"
+"som den har om dit system. Afh鎛gig af installeret maskinel kan du have\n"
+"et eller flere af de f鴏gende punkter. Hvert punkt best錼 af en overskrift\n"
+"fulgt af en kort opsummering af den nuv鎟ende konfiguration. Klik p錦n"
+"den tilsvarende \"%s\"-knap for at 鎛dre p ops鎡ningen.\n"
"\n"
-" Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-" I konfigurationen kan du v鎙ge: \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ... eller Andet (s錽om Windows partitioner)\n"
+" * \"%s\": Tjek at din tastaturops鎡ning er korrekt og 鎛dr om n鴇vendigt.\n"
"\n"
-" Drakbackup lader dig tage sikkerhedskopier af dit system p:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- B錸d.\n"
+" * \"%s\": Tjek at du har valgt korrekt land. Hvis du ikke er i dette land,\n"
+"s klik p \"%s\"-knappen og v鎙g et andet land. Hvis dit land ikke er i\n"
+"listen, s klik p \"%s\"-knappen for at f en fuldst鎛dig liste.\n"
"\n"
-" Drakbackup lader dig genskabe dit system p錦n"
-" et katalog valgt af brugeren.\n"
+" ' \"%s\": DrakX bestemmer din tidszone ud fra hvilket land du har valgt.\n"
+"Du kan klikke p \"%s\" her, hvis dette ikke er korrekt.\n"
"\n"
-" Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-" /var/lib/drakbackup katalog\n"
+" * \"%s\" :Tjek museops鎡ningen og klik p knappen for at 鎛dre om "
+"n鴇vendigt.\n"
"\n"
-" Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": Ved at klikke p \"%s\"-knappen 錬nes printerops鎡nings-\n"
+"hj鎙peren. Konsult閞 det tilh鴕ende kapitel i opstartsguiden for mere\n"
+"information om hvordan en printer kan s鎡tes op. Gr鎛sefladen som er vist\n"
+"d閞 ligner den som benyttes under installationen.\n"
"\n"
-"Genskabelsestrin:\n"
-" \n"
-" I genskabelsestrinnet vil Drakbackup fjerne dit nuv鎟ende katalog \n"
-" og kontrollere at alle dine backupfiler ikke er 鴇elagte. Det \n"
-" anbefales at du laver en sidste sikkerhedskopiering f鴕 genskabelse.\n"
-" \n"
+" * '%s': Hvis et lydkort er blevet fundet p dit system, vil det blive vist "
+"h閞. Hvis du bem鎟ker at det viste lydkort ikke er det som faktisk er til "
+"stede p systemet, kan du klikke p knappen og v鎙ge en anden driver.\n"
+"\n"
+" * \"%s\": DrakX vil ops鎡te din grafiske gr鎛seflade i opl鴖ning\n"
+"800x600 eller 1024x768. Hvis det ikke passer til dine behov, s klik p \"%s"
+"\"-\n"
+"knappen for at 鎛dre p ops鎡ningen.\n"
+"\n"
+" * \"%s\": Hvis et TV-kort er fundet i din maskine, er det vist her. Hvis du "
+"har\n"
+"et TV-kort som ikke er fundet, s klik \"%s\" for at s鎡te det op manuelt.\n"
+"\n"
+" * \"%s\": Hvis der er fundet et ISDN-kort, vil det vises her. Du kan klikke "
+"p錦n"
+"\"%s\" for at 鎛dre p parameterne til kortet.\n"
+"\n"
+" * \"%s\": V鎙g dette for at 鎛dre p internetforbindelsen eller den lokale\n"
+"netv鎟ksops鎡ning.\n"
+"\n"
+" * \"%s\": Du kan her 鎛dre p sikkerhedsniveauet som er defineret "
+"tidligere.\n"
+"\n"
+" * \"%s\": Hvis du skal koble din maskine direkte til internet, er det en "
+"god id閈n"
+"at beskytte sig mod angreb med en brandmur. Begyndervejledningen har mere "
+"om\n"
+"dette.\n"
+"\n"
+" * \"%s\": Hvis du vil 鎛dre p konfigurationen for opstartsindl鎠eren,\n"
+"s klik p denne knap. Dette b鴕 forbeholdes avancerede brugere.\n"
"\n"
+" * \"%s\": Her kan du bestemme hvilke tjenester som skal startes p din\n"
+"maskine. Hvis du skal bruge maskinen som server er det en god id at "
+"kontrollere dette."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comorerne"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" opdateringer 2002 MandrakeSoft ved Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"\n"
+"\n"
+"\n"
+"Vi skal nu konfigurere opkoblingen '%s'.\n"
+"\n"
+"\n"
+"Tryk OK for at begynde."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot modus"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kabel)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Kan ikke genstarte LiLo!\n"
+"Start \"lilo\" som root p kommandolinjen for at f鎟digg鴕e installationen "
+"af Lilo-tema."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Standard 3-knaps mus"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "V鎙g et andet medie at genskabe fra"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Programmeladministration"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14372,17 +13716,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"beskrivelse af genskabelse:\n"
@@ -14407,4661 +13753,5355 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" - Lav sikkerhedskopi af systemfiler:\n"
-" \n"
-"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
-"\tsom indeholder alle konfigurationsfiler. V鎟 \n"
-"\tforsigtig p genskabelsestrinnet med ikke at overskrive:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Lav sikkerhedskopi af brugerfiler: \n"
-"\n"
-"\tDenne mulighed lader dig v鎙ge alle de brugere som du vil lave\n"
-"\tsikkerhedskopier for.\n"
-"\tFor at spare p diskplads anbefales du ikke medtager netl鎠eres\n"
-"\tcache.\n"
-"\n"
-" - Lav sikkerhedskopi af andre filer: \n"
-"\n"
-"\tDenne mulighed lader dig tilf鴍e mere data som skal gemmes.\n"
-"\tMed denne sikkerhedskopieringsm錮e er det ikke muligt i 鴍eblikket \n"
-"\tat v鎙ge inkrementalbackup.\t\t\n"
-" \n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den st鎟keste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den f鴕ste gang, og derefter kun de 鎛drede data.\n"
-"\tS vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet f鴕 hver sikkerhedskopiering. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Nogle fejl under sendmail kommer fra \n"
-" en d錼lig konfiguration af postfix. For at l鴖e dette skal du\n"
-" s鎡te myhostname eller mydomain i /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Indsend igen"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" P dette trin vil Drakbackup lade dig 鎛dre:\n"
-"\n"
-" - Komprimeringsm錮en:\n"
-" \n"
-" Hvis du markerer bzip2-komprimering, vil du komprimere\n"
-" dine data bedre end gzip (omkring 2-10 %%).\n"
-" Denne valgmulighed er ikke markeret som standard fordi\n"
-" denne komprimeringsm錮e kr鎣er mere tid (omkring 1000%% mere).\n"
-" \n"
-" - Opdateringsm錮en:\n"
-"\n"
-" Denne valgmulighed vil opdatere din backup, men denne\n"
-" valgmulighed er ikke rigtigt nyttig fordi du skal\n"
-" dekomprimere din backup f鴕 du kan opdatere den.\n"
-" \n"
-" - M錮en for .backupignore:\n"
-"\n"
-" som med cvs vil Drakbackup ignorere alle referencer\n"
-" indeholdt i .backupignore-filer i hvert katalog.\n"
-" fx: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Cd'en er p plads - forts鎡."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "Kb"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Genskab"
+msgid "Network & Internet"
+msgstr "Netv鎟k og Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Lav sikkerhedskopiering nu"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litauisk \"fonetisk\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Avanceret konfiguration"
+msgid "Net Boot Images"
+msgstr "Opstartsbilleder for netopstart"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Konfiguration med vejleder"
+msgid "Sharing of local scanners"
+msgstr "Deling af lokale skannere"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Se konfiguration af sikkerhedskopiering."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
+"Unders鴊ning for Plug'n Play mislykkedes. V鎙g venligst den rigtige sk鎟m"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
+msgid "Services and deamons"
+msgstr "Tjenester og d鎚oner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfiguration"
+msgid "Remote host name missing!"
+msgstr "Eksternt v鎟tsnavn mangler"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Total fremdrift"
+msgid "with /usr"
+msgstr "med /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Sender filer..."
+msgid "Network"
+msgstr "Netv鎟k"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "Filer sendes via FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Auto-opdagelse af printere tilsluttet maskiner der k鴕e Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Lav sikkerhedskopi af andre filer"
+msgid "This password is too simple"
+msgstr "Adgangskoden er for simpel"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Lav sikkerhedskopi af brugerfiler"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovakisk (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Lav sikkerhedskopi af systemfiler"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"At 鎛dre og oprette i forskellige sprog som Perl, Python, C og C++ har "
+"aldrig f鴕 v鎟et s nemt, takket v鎟e GNU gcc 3 og de bedste "
+"udviklingsmilj鴈r baseret p 錬en kildekode."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Under udvikling ... vent venligst:-)"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Virkelig minimal installation (specielt ingen urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"ingen konfigurationsfil fundet \n"
-"klik p Vejleder eller Avanceret."
+" Overf鴕 \n"
+"Nu"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "V鎙g data for sikkerhedskopi..."
+msgid "Use daemon"
+msgstr "Brug d鎚on"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "V鎙g medie for sikkerhedskopi..."
+msgid "Authentication"
+msgstr "Identifikation"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Udv鎙g de data du vil genskabe..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Tilf鴍 denne printer til Star Office/OpenOffice.org/GIMP.org"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "De f鴏gende pakker beh鴙er at blive installeret\n"
+msgid "Additional CUPS servers: "
+msgstr "Yderligere CUPS-servere: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Fejl ved sending af fil via FTP.\n"
-" Ret venligst din FTP-konfiguration."
+"V鎙g en af de fundne printere fra listen eller angiv v鎟tsnavnet eller IP-"
+"adressen og eventuelt portnummer (standard er 9100) i indtastningsfelterne."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Hvor 鴑sker du at montere %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Genskab via netv鎟k"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algeriet"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-st鴕relse"
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Fejl ved sendmail.\n"
-" Din rapport blev ikke sendt.\n"
-" Konfigur閞 venligst sendmail"
+"I tilf鎙de af at forskellige servere er tilg鎛gelige til dit kort, med eller "
+"uden 3D-accelleration, bliver du foresl錯t at v鎙ge den server der bedst "
+"opfylder dine behov."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "N鎠te"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Forrige"
+msgid "2 MB"
+msgstr "2 Mb"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Gem"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation sp鴕g ikke det f鴕ste bekr鎓telsessp鴕gsm錶 i "
+"MandrakeUpdate-tilstand\n"
+" --no-verify-rpm efterpr鴙 ikke pakke-signaturer\n"
+" --changelog-first v韘 changelog f鴕 filliste i beskrivelsesvinduet\n"
+" --merge-all-rpmnew foresl at flette alle .rpmnew/.rpmsave filer fundet"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Opbyg sikkerhedskopien"
+msgid "Setting Default Printer..."
+msgstr "S鎡ter standard printer..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Fremskridt for genskabelse"
+msgid "Interface %s (using module %s)"
+msgstr "Gr鎛seflade %s (benytter modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Genskab fra katalog"
+msgid "Name: %s\n"
+msgstr "Navn: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Bladr til nyt genskabelseslager."
+msgid "Generating preview ..."
+msgstr "Genererer smugkig ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Cd'en er p plads - forts鎡."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Frek b鴕 have endelsen k, M or G (for eksempel, \"2.46G\" for 2.46 GHz "
+"frekvens), eller tilf鴍 nok '0'."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Tilpasset genskabelse"
+msgid "serial"
+msgstr "seriel"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Genskab alle sikkerhedskopier"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Genskabelse mislykkedes..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgisk (Latin layout)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Filer genskabte..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "F fat i de bedste sager fra Mandrake Linux strategiske partnere"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Sti eller modul kr鎣et"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Du kan nu angive parametre til modul %s.\n"
+"Bem鎟k at alle adresser b鴕 indtastes med foranstillet 0x, fx '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "V鎟tsnavn kr鎣et"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 indeholder Mandrake Kontrolcenter, et st鎟kt v鎟kt鴍 til "
+"at tilpasse din maskine fullst鎛digt til den brug du har behov for. "
+"Konfigur閞 og tilpas elementer som sikkerhedsniveau, tilbeh鴕 (sk鎟m, mus, "
+"tastatur), internetforbindelse og meget mere!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Brugernavn kr鎣et"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Adgangskode kr鎣et"
+msgid "Use ``Unmount'' first"
+msgstr "Benyt ``Afmont閞'' f鴕st"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Stil til v鎟t eller modul"
+msgid "Installing mtools packages..."
+msgstr "Installerer mtools-pakker..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "V鎟tsnavn"
+msgid "You must specify a root partition"
+msgstr "Du skal angive en root-partition"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Genskab via netv鎟ksprotokol: %s"
+msgid "first step creation"
+msgstr "opretter f鴕ste trin"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Genskab via netv鎟k"
+msgid "Both Shift keys simultaneously"
+msgstr "Begge taster samtidigt"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ikke korrekt b錸detiket. B錸det har etiket %s."
+msgid "Select a scanner model"
+msgstr "V鎙g en skannermodel"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Inds鎡 b錸det med volumeetiket %s\n"
-" i b錸denheden %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Genskab fra b錸d"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ikke korrekt cd-etiket. Cd'en har etiket %s."
+msgid "Save as.."
+msgstr "Gem som..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Inds鎡 cd'en med volumetiket %s\n"
-" i cd-enheden monteret p /mnt/cdrom"
+"Dette gr鎛sesnit er ikke blevet konfigureret endnu.\n"
+"Start konfigurationsvejlederen i hovedvinduet"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Genskab fra cd"
+msgid "Korea (North)"
+msgstr "Korea (Nord)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Sikkerhedskopier fandtes ikke p %s."
+msgid "Autologin"
+msgstr "Autologin"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"苙dr\n"
-"Genskabelsessti"
+msgid "System configuration"
+msgstr "Systemkonfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Adgangskode for dom鎛eadministrator"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Genskab valgte\n"
-"filer"
+"Perfekt tilpasning af din maskine takket v鎟e de 11 Mandrake Linux-"
+"brugergr鎛seflader hvor alt kan tilpasses: KDE 3.1, Gnome 2.2, Window "
+"Maker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Konfigurerer printer ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Genskab valgt\n"
-"katalogpost"
+"For at sikre dataintegritet efter 鎛dring af st鴕relse p partitioner \n"
+"vil filsystemtjek blive k鴕t ved din n鎠te opstart af Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Fjern brugerkataloger f鴕 genskabning."
+msgid "MB"
+msgstr "Mb"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Lav ny sikkerhedskopi f鴕 genskabning (kun for inkrementalbackupper)."
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "hvis sat til ja, s k鴕 nogle tjek p rpm-databasen."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "v鎙g sti at genskabe (i stedet for /)"
+msgid "Virgin Islands (British)"
+msgstr "Jomfru鴈rne (britiske)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Genskab andet"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Genskab brugere"
+msgid "click here if you are sure."
+msgstr "Klik her hvis du er sikker."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Genskab system"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"ingen konfigurationsfil fundet \n"
+"klik p Vejleder eller Avanceret."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Andet medie"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Her er listet de eksisterende Linux-partitioner genkendt p din disk. Du kan "
+"beholde valgene gjort af vejlederen, de er velegnede til almindelig brug. "
+"Hvis du 鎛drer disse valg skal du i det mindste definere en rod-partition "
+"'/'. Lad v鎟e med at v鎙ge en for lille partition, ellers vil du ikke kunne "
+"installere nok programmel. Hvis du 鴑sker at lagre data p en separat "
+"partition, skal du ogs v鎙ge en '/home' (kun muligt hvis du har mere end 閚 "
+"Linux-partition). \n"
+"Hver partition er listet som f鴏ger: 'Navn', 'Kapacitet'.\n"
+"\n"
+"'Navn' er kodet som f鴏ger: 'drevtype', 'drevnummer', "
+"'partitionsnummer' (for eksempel '/hda1').\n"
+"\n"
+"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
+"SCSI drev.\n"
+"\n"
+"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
+"\n"
+" * 'a' betyder 'hoved-drev p den prim鎟e IDE controller',\n"
+"\n"
+" * 'b' betyder 'slave-drev p den prim鎟e IDE controller',\n"
+"\n"
+" * 'c' betyder 'hoved-drev p den s鎘und鎟e IDE controller',\n"
+"\n"
+" * 'd' betyder 'slave-drev p den s鎘und鎟e IDE controller'.\n"
+"\n"
+"For SCSI drev betyder 'a' det 'f鴕ste drev', 'b' betyder det 'andet drev', "
+"osv."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "V鎙g et andet medie at genskabe fra"
+msgid "Remove"
+msgstr "Fjern"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Genskab fra disk."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Brug kvoter for sikkerhedskopieringsfiler"
+msgid "Pipe job into a command"
+msgstr "kanalis閞 opgave ind i kommando"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Indtast den maksimale st鴕relse\n"
-" tilladt for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "Nyt dynamisk enhedsnavn genereret af den k鴕ende kernes devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Indtast kataloget der skal gemmes:"
+msgid "Yes"
+msgstr "Ja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Brug disk til sikkerhedskopiering"
+msgid "Cote d'Ivoire"
+msgstr "Elfenbenskysten"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "V鎙g dato for genskabning"
+msgid "Which protocol do you want to use?"
+msgstr "Hvilken protokol 鴑sker du at bruge?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Lav sikkerhedskopi af systemfiler f鴕:"
+msgid "Restore Progress"
+msgstr "Fremskridt for genskabelse"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
+msgid "Estonia"
+msgstr "Estland"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "O.k. at genskabe de andre filer."
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "V鎙g v鎟ten p hvilken de lokale skannere skal g鴕es tilg鎛gelige: "
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Genskab konfiguration "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
+"Den eneste l鴖ning er at flytte dine prim鎟e partitioner, s錶edes at\n"
+"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " genskabt uden fejl p %s "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Alle dine valgte data er blevet "
+msgid "Add"
+msgstr "Tilf鴍"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Sikkerhedskopifiler er 鴇elagte"
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Deling af Internetforbindelse har aldrig v鎟et konfigureret."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Afmark閞 eller fjern det gerne n鎠te gang."
+msgid " Error while sending mail. \n"
+msgstr " Fejl ved afsendelse af post. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Tastatur"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Liste over data der er 鴇elagt:\n"
-"\n"
+"Inds鎡 cd'en med volumetiket %s\n"
+" i cd-enheden monteret p /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Liste over data som skal genskabes:\n"
-"\n"
+"Hastighed b鴕 have endelsen k, M or G (for eksempel, \"11M\" for 11M), eller "
+"tilf鴍 nok '0'."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klik p Vejleder eller Avanceret.\n"
+msgid "Choose the connection you want to configure"
+msgstr "V鎙g den opkobling, du 鴑sker at konfigurere"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Netv鎟k via webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Vent venligst, s鎡ter sikkerhedsniveau..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Netv鎟k via rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 er den ultimative udviklingsplatform."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netv鎟k via SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Konfigurerer netv鎟ksenheden %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netv鎟k via FTP.\n"
+msgid "activated"
+msgstr "aktiveret"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "V鎙g hvilken netv鎟ksgr鎛seflade som skal bruges til dhcp-serveren."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-cdrom.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Leder efter pakker som skal opgraderes"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Diskdrev.\n"
+msgid "Mount point: "
+msgstr "Monteringssti: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- D鎚on (%s) indeholder:\n"
+msgid "parse all fonts"
+msgstr "fortolk alle skrifttyper"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
+msgid "With X"
+msgstr "Med X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Flersk鎟ms-konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tMedtag ikke systemfiler\n"
+msgid "No browser available! Please install one"
+msgstr "Ingen netl鎠er til stede! Install閞 venligst 閚"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Behold 鎛dringer?\n"
+"Nuv鎟ende konfiguration er:\n"
"\n"
-"- Muligheder:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t brugernavn: %s\n"
-"\t\t p sti: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Du kan ikke bruge ReiserFS p partitioner mindre end 32Mb"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Gem via %s p v鎟t: %s\n"
+"rwho protokollen tillader eksterne brugere at hente en liste over alle "
+"brugere der er logget ind p en maskine, der k鴕er rwho d鎚onen (minder om "
+"finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Dom鎛enavn"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Gem p b錸d p enhed: %s"
+msgid "Sharing of local printers"
+msgstr "Deling af lokale printere"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-session)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " p enhed: %s"
+msgid "Available printers"
+msgstr "Tilg鎛gelige printer"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Tom"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Br鎛d p CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Slet tar-filer p disken efter sikkerhedskopiering.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Gem til diskdrev p stien: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Andre filer:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (for X Window System) er hjertet af GNU/Linux' grafiske gr鎛seflade som "
+"alle de grafiske milj鴈r (KDE, GNOME, AfterStep, WindowMaker, mv.) der "
+"kommer sammen med Mandrake Linux afh鎛ger af.\n"
"\n"
-"- Brugerfiler:\n"
+"Du vil blive vist en liste med forskellige parametre der kan 鎛dres for at "
+"f den bedst mulige grafiske fremvisning:\n"
+"\n"
+"Grafikkort\n"
+"\n"
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"grafikkortet installeret p din maskine. Hvis dette ikke er tilf鎙det kan du "
+"fra denne liste v鎙ge det kort du faktisk har installeret.\n"
+" I tilf鎙de af at forskellige drivere er tilg鎛gelige til dit kort, med "
+"eller uden 3D-accelleration, bliver du spurgt om at v鎙ge den server der "
+"bedst opfylder dine behov.\n"
+"\n"
+"\n"
+"Sk鎟m\n"
+"\n"
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"sk鎟men tilsluttet din maskine. Hvis dette ikke er den rigtige, kan du fra "
+"denne liste v鎙ge den sk鎟m du faktisk har tilsluttet din maskine.\n"
+"\n"
+"\n"
+"Opl鴖ning\n"
+"\n"
+" Du kan v鎙ge opl鴖ninger og farvedybder fra de tilg鎛gelige muligheder "
+"for dit udstyr. V鎙g dem som bedst opfylder dine behov (du vil dog kunne "
+"鎛dre dette efter installationen). Et eksempel p den valgte konfiguration "
+"vil blive vist p sk鎟men.\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" Systemet vil pr鴙e at 錬ne en grafisk sk鎟m i den 鴑skede opl鴖ning. Hvis "
+"du kan se beskeden under afpr鴙ningen og svarer '%s', s vil DrakX g videre "
+"til n鎠te trin. Hvis du ikke kan se beskeden, betyder det at en del af den "
+"automatisk fundne konfiguration var forkert og testen vil automatisk slutte "
+"efter 12 sekunder, og bringe dig tilbage til menuen. 苙dr indstillingerne "
+"til du f錼 en korrekt grafisk fremvisning.\n"
+"\n"
+"\n"
+"\n"
+"Valgmuligheder\n"
+"\n"
+" Du kan h閞 v鎙ge om du 鴑sker at din maskine automatisk skal skifte til "
+"en grafisk gr鎛seflade ved opstart. Selvf鴏gelig vil du 鴑ske at svare Nej, "
+"hvis din maskine skal bruges som server, eller hvis ikke lykkedes dig at f "
+"sk鎟men konfigureret. You can here choose whether you want to have your "
+"machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "tekstbredde"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Hvor 鴑sker du at montere partitionen %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Normal udlejningsperiode (i sekunder)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Gr鎛seflade '%s'"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Med basal dokumentation (anbefalet!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 knap"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Systemfiler:\n"
+"Der findes %d ukendte printere direkte tilsluttet til dit system"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Afpr鴙"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumenter: (arg)\n"
"\n"
-"Kilder for sikkerhedskopi: \n"
+"Tillad/forbyd direkte root-logind."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "H錸dpluk bruger"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Lav sikkerhedskopi af brugere"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Dit valg? (standard '%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Lav sikkerhedskopi af system"
+msgid "Raw printer"
+msgstr "R printer"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "V鎙g hvad du vil sikkerhedkopiere"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Officielt producentnavn p processoren"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "p b錸denhed"
+msgid "Vendor"
+msgstr "Producent"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "p cd-rom"
+msgid "Interface %s"
+msgstr "Gr鎛seflade %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "over netv鎟k"
+msgid "Configure mouse"
+msgstr "Konfigur閞 mus"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "p diskdrev"
+msgid "Choose the mount points"
+msgstr "V鎙g monterings-stierne"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "V鎙g hvor du 鴑sker at sikkerhedskopiere"
+msgid "OK"
+msgstr "O.k."
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Flere muligheder"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslavisk (latinsk)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Hvorn錼"
+msgid "Installing"
+msgstr "Installerer"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Hvor"
+msgid "Launch userdrake"
+msgstr "Start userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Hvad"
+msgid "Is this an install or an upgrade?"
+msgstr "Er dette en nyinstallation eller en opgradering?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Slet tar-filer p disken efter sikkerhedskopiering til andet medie."
+msgid "ISDN card"
+msgstr "ISDN-kort"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"For at dele din viden og hj鎙pe med at bygge Linux-v鎟kt鴍er kan du v鎟e med "
+"i diskussionsfora som du finder p vores 'Samfunds'-netsider."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Forsikr dig gerne om at cron-d鎚onen er med i dine tjenester.\n"
-"Bem鎟k at alle 'net'-medier ogs bruger disken for n鎟v鎟ende."
+"Tillykke, netv鎟ks- og internetkonfigurationen er f鎟dig.\n"
+"Konfigurationen vil nu blive anvendt p dit system.\n"
+"\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"V鎙g mediet for\n"
-"sikkerhedskopiering."
+msgid "\t-Hard drive.\n"
+msgstr "\t-Diskdrev.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"V鎙g tidsinterval mellem\n"
-"hver sikkerhedskopiering"
+"Dette trin bliver kun aktiveret hvis der bliver fundet en eksisterende\n"
+"GNU/Linux partition p din maskine.\n"
+"\n"
+"DrakX skal vide om du vil udf鴕e en ny installation eller en opgradering\n"
+"af et eksisterende Mandrake Linux-system.\n"
+"\n"
+" * \"%s\": Dette vil stort s閠 slette hele det gamle system. Hvis du\n"
+"鴑sker at 鎛dre hvordan diskene bliver partitioneret, eller 鎛dre p錦n"
+"filsystemene, b鴕 du v鎙ge dette. Afh鎛gigt af hvordan du partitionerer kan\n"
+"nogen af de gamle data eventuelt beholdes. \n"
+"\n"
+" * \"%s\": Denne installationsklasse lader dig opgradere pakkene som\n"
+"er installeret p dit nuv鎟ende Mandrake Linux-system. Dine nuv鎟ende\n"
+"partitioner og brugerdata bliver ikke ber鴕t. De fleste andre "
+"konfigurationstrin\n"
+"forbliver tilg鎛gelige, i lighed med en standardinstallation.\n"
+"\n"
+"\"Opgrad閞\"-valget b鴕 fungere p Mandrake Linux-systemer som k鴕er\n"
+"version 8.1 eller nyere. Opgradering af versioner tidligere end 8.1 er ikke\n"
+"anbefalet. "
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "Brug d鎚on"
+msgid "Printer on remote CUPS server"
+msgstr "Printer p ekstern CUPS server"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
-msgstr "m錸edligt"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org/GIMP.org."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr "ugentligt"
+msgid "delete"
+msgstr "slet"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
-msgstr "dagligt"
+msgid "here if no."
+msgstr "Her hvis ikke."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "hourly"
-msgstr "timeligt"
+msgid "DHCP host name"
+msgstr "DHCP-v鎟tsnavn"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Diskdrev / NFS"
+msgid "The maximum lease (in seconds)"
+msgstr "St鴕ste udlejningsperiode (i sekunder)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "V鎙g hvilken seriel port din mus er forbundet til."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Indtast kataloget hvortil der skal gemmes:"
+msgid "Did it work properly?"
+msgstr "Fungerer det korrekt?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Mark閞 om du vil udskyde dit b錸d f鴕 sikkerhedskopi laves"
+msgid "Poor"
+msgstr "Ringe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Mark閞 om du vil slette dit b錸d f鴕 sikkerhedskopi laves"
+msgid "The DHCP start range"
+msgstr "Begyndelsen p DHCP-omr錮et"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Mark閞 om du vil bruge den ikke-tilbagespolende enhed."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
+msgid "Unsafe"
+msgstr "Usikker"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "brug b錸d til sikkerhedskopieringen"
+msgid ", %s sectors"
+msgstr ", %s sektorer"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Ingen cd-enhed defineret!"
+msgid "No"
+msgstr "Nej"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Indtast din CD-br鎛ders enhedsnavn\n"
-" fx: 0,1,0"
+"Er din printer en multi-funktionenhed fra HP eller Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 med skanner, Sony IJP-V100), en HP "
+"PhotoSmart eller en HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Mark閞 om du bruger en DVDRAM-enhed"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Mark閞 om du bruger en CDRW-enhed"
+msgid "could not find any font.\n"
+msgstr "Kunne ikke finde nogen skrifttyper.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid " Erase Now "
-msgstr " Slet nu "
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Mark閞 om du vil slette dit CDRW-medie (1. session"
+msgid "Vertical refresh rate"
+msgstr "Lodret opdateringsfrekvens"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Mark閞 om du bruger et CDRW-medie"
+msgid "Entering step `%s'\n"
+msgstr "G錼 til trin `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Mark閞 om du bruger en multisessions-cd"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "V鎙g cd/dvd-mediast鴕relse"
+msgid "Removing %s ..."
+msgstr "Fjerner %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"V鎙g cd/dvd-enhed.\n"
-"(Tryk Enter for at overf鴕e indstillinger til andre felter.\n"
-"Dette felt beh鴙es ikke, det er kun et v鎟kt鴍 for at udfylde formularen.)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Brug CD/DVDROM til sikkerhedskopiering"
+msgid "No printer"
+msgstr "Ingen printer"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Beh鴙er v鎟tsnavn, brugernavn og adgangskode!"
+msgid "alert configuration"
+msgstr "advarsels-konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Husk denne adgangskode"
+msgid "NetWare Printer Options"
+msgstr "NetWare printer-parametre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please enter your password"
-msgstr "Indtast din adgangskode"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s smugkig af opstartssk鎟m (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please enter your login"
-msgstr "Indtast dit brugernavn"
+msgid "General"
+msgstr "Generelt"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Indtast kataloget (eller modulet) hvori\n"
-" sikkerhedskopien skal l鎔ges p denne maskine."
+msgid "Printing system: "
+msgstr "Printsystem: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Indtast v鎟tsnavn eller IP."
+msgid "Add a user"
+msgstr "Tilf鴍 bruger"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Andet (ikke drakbackup)\n"
-"n鴊lerne findes allerede"
+msgid "Network configuration (%d adapters)"
+msgstr "Netv鎟kskonfiguration (%d adaptorer)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "Kr鎣et pakke %s mangler"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filippinerne"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "O.k."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Printerk-navn"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "豱sker du at bruge aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Hviderussisk"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Overf鴕 \n"
-"Nu"
+"PDQ underst鴗ter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
+"printere.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Flyt filer til den nye partition"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Opret/overf鴕\n"
-"sikkerhedskopieringsn鴊ler for SSH"
+"Tilf鴍 h閞 de CUPS-servere hvis prontere du 鴑sker at bruge. Du beh鴙er kun "
+"g鴕e dette, hvis serverne ikke rundkaster deres printerinformation p "
+"lokalnetv鎟ket."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Brug Expect for SSH"
+msgid "Restore From Catalog"
+msgstr "Genskab fra katalog"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Netmetode:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Brug netv鎟ksforbindelse til sikkerhedskopiering"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Brugere"
+msgid "group :"
+msgstr "gruppe:"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "montering af partition %s i katalog %s mislykkedes"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+msgid "Lilo screen"
+msgstr "Lilo-sk鎟m"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Fjern valgte"
+msgid "LILO with graphical menu"
+msgstr "LILO med grafisk menu"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Medtag ikke cache for netl鎠er"
+msgid "Estimating"
+msgstr "Beregnes"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Mark閞 alle brugere som du vil have med i din sikkerhedskopi."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Du kan ikke frav鎙ge denne pakke. Den er allerede installeret"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med denne valgmulighed vil du v鎟e i stand til at kunne genskabe\n"
-"enhver version af dit /etc katalog."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", printer \"%s\" p SMB/Windows-server \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Forts鎡 alligevel?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Leder efter tilg鎛gelige pakker og genopbygger rpm-database..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Lav sikkerhedkopi af dine systemfiler. (/etc kataloget)"
+msgid "Does not appear to be recordable media!"
+msgstr "Ser ikke ud til at v鎟e et skrivbart medie!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
-"katalog.\n"
+msgid "Specify options"
+msgstr "Specific閞 parametre"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Enten servernavnet eller serverens IP skal angives!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
+"v鎟e afh鎛gig af den normale opstarter. Det kan v鎟e nyttigt, hvis du ikke "
+"vil installere SILO p dit system - eller hvis et andet operativsystem "
+"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
+"opstartsdiskette kan ogs bruges sammen med Mandrakes `rescue image', "
+"hvilket g鴕 det meget nemmere at reparere systemet i tilf鎙de af "
+"systemnedbrud.\n"
"\n"
-"Mark閞 alle muligheder som du beh鴙er.\n"
+"Hvis du 鴑sker at lave en opstartsdiskette til dit system, inds鎡 en "
+"diskette i dit f鴕ste diskettedrev og tryk 'Ok'."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "V鎙g filerne eller katalogerne og klik p 'Tilf鴍'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Valg af filer"
+msgid "Norfolk Island"
+msgstr "Norfolk 豦n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Kan ikke oprette katalog!"
+msgid "Theme installation failed!"
+msgstr "Installation af tema mislykkedes"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Fejl ved afsendelse af post. \n"
+msgid "Nothing to do"
+msgstr "Ingenting at lave"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via b錸d:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Loopback anvendelse"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake v鎟kt鴍 til fejlrapportering"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "brug pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Flytter filer til den nye partition"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Avanceret"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Overf鴕"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (svensk)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler via "
-"FTP.\n"
+msgid "More Options"
+msgstr "Flere muligheder"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Slet tar-filer p disken efter sikkerhedskopiering til andet medie."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"filliste sendt via FTP: %s\n"
-" "
+"cron er et standard UNIX program der k鴕er bruger-specifikke programmer p "
+"planlagte tidspunkter. Vixie cron tilf鴍er en del forbedringer til den "
+"basale UNIX cron, inklusive bedre sikkerhed og st鎟kere "
+"konfigurationsmuligheder."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Ingen 鎛dringer til sikkerhedskopi!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Sikkerhedskopifiler for disk..."
+msgid "Add Client -->"
+msgstr "Tilf鴍 klient -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Sikkerhedskopi閞 andre filer..."
+msgid "Read carefully!"
+msgstr "L鎠 omhyggeligt!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Fremdrift for sikkerhedskopiering af disk..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Sikkerhedskopi閞 brugerfiler..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "Indtast din tv-standard og land"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Sikkerhedskopi閞 systemfiler..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Intet b錸d i %s."
+msgid "No (experts only)"
+msgstr "Nej (kun eksperter)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem med rettigheder ved adgang til CD."
+msgid "No kernel selected!"
+msgstr "Ingen kerne valgt!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Det kan tage lidt tid at slette mediet."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Ikke sletbart medie!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Ser ikke ud til at v鎟e et skrivbart medie!"
+msgid "The encryption keys do not match"
+msgstr "Krypteringsn鴊lerne stemmer ikke overens"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Ingen CDR/DVDR i drevet!"
+msgid "Right \"Windows\" key"
+msgstr "H鴍re Windows-tast"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV overf鴕sel mislykkedes!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "WebDAV eksternt netsted allerede synkroniseret!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "hvis sat til ja, s tjek for tomme adgangskoder i /etc/shadow."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Total fremdrift"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"F鴕 du g錼 videre b鴕 du l鎠e betingelserne i licensen omhyggeligt. Den "
+"omfatter hele Mandrake Linux distributionen. Hvis du er enig i alle "
+"betingelserne i den, s klik p '%s'-knappen. Hvis ikke, s kan du bare "
+"slukke for maskinen."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Overf鴕sel klar.\n"
-"Du vil m錽ke kontrollere at du kan logge ind p serveren med:\n"
+"Her er en liste over tilg鎛gelige printmuligheder for den aktuelle printer:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Opl鴖ninger"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"uden at blive spurgt om en adgangskode."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"drakfirewall-konfigurator\n"
+"\n"
+"Dette konfigurerer en personlig brandmur for denne Mandrake Linux-maskine.\n"
+"For en st鎟k dedikeret brandmurs-l鴖ning se venligst den specialiserede "
+"MandrakeSecurity Firewall-distribution."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s svarer ikke"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Indtast venligst dit brugernavn, din adgangskode og dit dom鎛enavn for at f "
+"adgang til denne v鎟t."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Kan ikke finde %s p %s"
+msgid "Remove selected host"
+msgstr "Fjern valgte v鎟t"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Adgang n鎔tet ved overf鴕sel af %s til %s"
+msgid "Network configuration"
+msgstr "Netv鎟ks konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "D錼lig adgangskode p %s"
+msgid "No sharing"
+msgstr "Ingen fildeling"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Ingen foresp鴕gsel om adgangskode p %s ved port %s"
+msgid "Move selected rule down one level"
+msgstr "Flyt valgte regel et niveau ned"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "Fejl: Kan ikke starte %s."
+msgid "TB"
+msgstr "Tb"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Det kan tage lidt tid at generere n鴊lerne."
+msgid "Please check if you are using a DVDR device"
+msgstr "Mark閞 om du bruger en CDRW-enhed"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s-eksisterer, skal den fjernes?\n"
-"\n"
-"Advarsel: Hvis du allerede har lavet denne proces skal du nok\n"
-" fjerne indgangen fra authorized_keys p serveren."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP-serveren vil muligg鴕e at andre maskiner kan starte op med PXE ved brug "
+"af det opgivne adresseomr錮e.\n"
"\n"
-" DrakBackup Rapportdetaljer\n"
-"\n"
+"Netv鎟ksadressen er %s med en netmaske p %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Slet"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumenter: (arg)\n"
"\n"
-" DrakBackup D鎚on-Rapport\n"
-"\n"
-"\n"
+"Tillad/forbyd genstart via konsolbruger."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup Rapport \n"
-"\n"
+"Jeg kan s鎡te din maskine op til automatisk at starte X ved\n"
+"opstart. 豱sker du at starte X hver gang du genstarter?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFORMATION"
+msgid "Build the disk"
+msgstr "Opbyg disken"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Frakobl %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ADVARSEL"
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron er ikke tilg鎛gelig endnu som ikke-root"
+msgid "HTTP proxy"
+msgstr "HTTP-proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installationen af %s mislykkedes. F鴏gende fejl opstod:"
+msgid "SSH Server"
+msgstr "SSH-server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nej, jeg 鴑sker ikke automatisk login"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Netv鎟k via rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg 鴑sker automatisk login med denne (bruger, skrivebord)"
+msgid "European protocol"
+msgstr "Europ鎖sk protokol"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Start X-vinduessystemet efter opstart"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", printer \"%s\" p server \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Systemtilstand"
+msgid "Error"
+msgstr "Fejl"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Opstartssk鎟m"
+msgid "allow \"su\""
+msgstr "tillad \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo-sk鎟m"
+msgid "Australia"
+msgstr "Australien"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"V鎙g et tema for\n"
-"Lilo og opstartsk鎟men,\n"
-"du kan v鎙ge\n"
-"dem separat"
+msgid "please wait during ttmkfdir..."
+msgstr "Vent venligst p ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Temaer"
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigur閞 kun kort \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Valg af opstartssk鎟m"
+msgid "Level"
+msgstr "Niveau"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruger for 鴍eblikket % som opstartsh錸dterer.\n"
-"Klik p Konfigur閞 for at starte ops鎡nings-vejlederen."
+msgid "Change the printing system"
+msgstr "苙dr printsystemet"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Problemfri installation af temaer for LiLo- og opstartssk鎟m"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Dit system underst鴗ter konfiguration af flere sk鎟me\n"
+"Hvad vil du g鴕e?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Installation af tema mislykkedes"
+msgid "Configure services"
+msgstr "Konfigur閞 tjenester"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Bem鎟k"
+msgid "Broadcast Address:"
+msgstr "Rundkastningsadresse:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Genstart 'lilo'"
+msgid "mount failed: "
+msgstr "montering mislykkedes: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Kan ikke genstarte LiLo!\n"
-"Start \"lilo\" som root p kommandolinjen for at f鎟digg鴕e installationen "
-"af Lilo-tema."
+"GNU/Linux-kernen skal k鴕e en bergningsl鴎ke ved opstaten for at "
+"initialisere en tidst鎙ler. Dets resultat lagres som bogomips som en m錮e at "
+"m錶e hastigheden p cpu'en."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Lav initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Billede"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Kan ikke opstarte mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Kunne ikke tilf鴍e printeren \"%s\" til Star Office/OpenOffice.org/GIMP.org."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Ekstern administration"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Kan ikke skrive /etc/sysconfig/bootsplash\n"
-"Fil ikke fundet."
+"PCMCIA-underst鴗telse eksisterer ikke l鎛gere for 2.2-kerner. Brug en 2.4-"
+"kerne."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Skriv %s"
+msgid "Selected All"
+msgstr "Valgte alt"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Kan ikke skrive /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Lilo-besked ikke fundet"
+msgid "Webmin Service"
+msgstr "Webmin-tjeneste"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopi閞 %s til %s"
+msgid "device"
+msgstr "enhed"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Sikkerhedskopi閞 %s til %s.old"
+msgid "All"
+msgstr "Alt"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Opret nyt tema"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Hvilket printersystem (spooler) 鴑sker du at bruge?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Visningstema\n"
-"under konsol"
+msgid "Greece"
+msgstr "Gr鎘enland"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Install閞 temaer"
+msgid "An error occurred"
+msgstr "Der er opst錯t en fejl"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Denne pakke skal opgraderes\n"
+"Er du sikker p at du vil frav鎙ge den?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (skrivemaskine-layout)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "manuel"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
+msgid "Printer manufacturer, model, driver"
+msgstr "Printerproducent, model, driver"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Fil"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Der er ikke noget media, eller det er skrivebeskyttet, i enhed %s.\n"
+"Inds鎡 venligst noget."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Katalog %s indeholder allerede nogen data\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Ingen netl鎠er til stede! Install閞 venligst 閚"
+msgid "Printer on NetWare server"
+msgstr "Printer p en NetWare server"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "Opkobler til vejleder for Bugzilla"
+msgid "Give the ram size in MB"
+msgstr "Angiv RAM-st鴕relse i Mb"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Pakke ikke installeret"
+msgid "Real name"
+msgstr "Rigtige navn"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Ikke installeret"
+msgid "done"
+msgstr "f鎟dig"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Fritst錯nde v鎟kt鴍er"
+msgid "Please uncheck or remove it on next time."
+msgstr "Afmark閞 eller fjern det gerne n鎠te gang."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Rapport"
+msgid "Higher"
+msgstr "H鴍ere"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "V鎙g partitioner der skal formateres"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Intet tv-kort blev genkendt p din maskine. Tjek venligst at et video/tv-"
+"kort der underst鴗tes af Linux er korrekt isat.\n"
"\n"
"\n"
-"For at indsende en fejlrapport klik da p rapport-knappen.\n"
-"Dette vil 錬ne et vindue i en netl鎠er p https://drakbug.mandrakesoft.com\n"
-" hvor du vil finde en formular der kan udfyldes. Informationen vist ovenfor "
-"vil blive overf鴕t til den server\n"
+"Du kan bes鴊e vores database over udstyr p:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Udgave: "
+msgid "Can't find %s on %s"
+msgstr "Kan ikke finde %s p %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kerne:"
+msgid "Japanese 106 keys"
+msgstr "Japansk 106 taster"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Pakke: "
+msgid "This will take a few minutes."
+msgstr "Dette vil tage nogle f minutter."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Applikation:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Vejledere til konfiguration"
+msgid "Use scanners on remote computers"
+msgstr "Brug skannere p eksterne maskiner"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Slet valgte regel"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Migrationsv鎟kt鴍 for MS Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Tilg錼 printere p eksterne CUPS-servere"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Inds鎡 en diskette i %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Programmeladministration"
+msgid "Maldives"
+msgstr "Maldiverne"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Ekstern kontrol"
+msgid "compact"
+msgstr "kompakt"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msek"
+msgid "1 minute"
+msgstr "1 minut"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "p kanal %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", multi-funktions-enhed"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Lagos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Synkroniseringsv鎟kt鴍"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Der er ingen FAT-partitioner at 鎛dre st鴕relse p (eller ikke nok plads "
+"tilbage)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "F鴕stegangshj鎙per"
+msgid "Up"
+msgstr "Op"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolcenter"
+msgid "Firewall"
+msgstr "Brandmur"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake v鎟kt鴍 til fejlrapportering"
+msgid "Area:"
+msgstr "Omr錮e:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametre"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontrolkort"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
+msgid "Printer Server"
+msgstr "Printer-server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
+msgid "Disconnection from the Internet complete."
+msgstr "Nedkopling fra Internet klar."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
+msgid "Custom configuration"
+msgstr "Tilrettet konfiguration"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Angiv venligst hvor installationsaftrykket vil v鎟e tilg鎛geligt.\n"
+"\n"
+"Hvis du ikke har et eksisterende katalog, s kopi閞 venligst indholdet af "
+"CD'en eller DVD'en.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Type af forbindelse"
+msgid "Saint Pierre and Miquelon"
+msgstr "Sankt Pierre og Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Problemer med genskabelse af sikkerhedskopier:\n"
+"\n"
+"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
+"backupfiler f鴕 genskabelse af dem.\n"
+"F鴕 genskabelsen vil Drakbackup fjerne \n"
+"dit nuv鎟ende katalog, og alle dine data vil g tabt.\n"
+"Det er vigtigt at v鎟e forsigtig og ikke 鎛dre sikkerhedskopieringens\n"
+"datafiler i h錸den.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
+msgid "saving Bootsplash theme..."
+msgstr "gemmer startsk鎟mstema..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internet-opkobling.\n"
-"Opret 閚 f鴕st ved at klikke p 'Konfigur閞'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Dette gr鎛sesnit er ikke blevet konfigureret endnu.\n"
-"Start konfigurationsvejlederen i hovedvinduet"
+msgid "Do you have another one?"
+msgstr "Har du 閚 til?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktiv閞 nu"
+msgid ", printing to %s"
+msgstr ", skriver til %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktiv閞 nu"
+msgid "Assign host name from DHCP address"
+msgstr "Tildel v鎟tsnavn fra DHCP-adresse"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP-klient"
+msgid "Toggle to normal mode"
+msgstr "Ekspert -> Normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Startede med opstart"
+msgid "Generic"
+msgstr "Standard"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
+msgid "Cylinder %d to %d\n"
+msgstr "Cylinder %d til %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "New profile..."
+msgstr "Ny profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
+msgid "Which disk do you want to move it to?"
+msgstr "Hvilken disk 鴑sker du at flytte den til?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
+msgid "Display logo on Console"
+msgstr "Vis logo p konsol"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede gr鎛sesnit.\n"
-"Konfigur閞 disse f鴕st ved at klikke p 'Konfigur閞'"
+msgid "Windows Domain"
+msgstr "Windows Domain"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Tilslut..."
+msgid "Interface %s (on network %s)"
+msgstr "Gr鎛seflade %s (p netv鎟k %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Afbrud..."
+msgid "INFO"
+msgstr "INFORMATION"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
+msgid "Wallis and Futuna"
+msgstr "Wallis og Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Tilsluttet"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Skal oprette /etc/dhcpd.conf f鴕st!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Er FPU tilstede"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+"Der blev ikke fundet nogen skannere som er tilg鎛gelige p dit system.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der m錽ke bruger "
-"dit netv鎟k"
+"Beklager, der er ingen ekstra\n"
+"information om denne tjeneste."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Gr鎛seflade:"
+msgid "Build Single NIC -->"
+msgstr "Byg enkel NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Er dette korrekt?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Anvend"
+msgid "Marshall Islands"
+msgstr "Marshall鴈rne"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Klik her for at starte vejlederen ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Vejleder..."
+msgid "Root password"
+msgstr "Adgangskode for root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Build All Kernels -->"
+msgstr "Byg alle kerner -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Type:"
+msgid "if set to yes, report unowned files."
+msgstr "hvis sat til ja, s rapport閞 filer der ikke er ejede af nogen."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internetadgang"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Du har ingen Swap partition\n"
+"\n"
+"Forts鎡 alligevel?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "V鎟tsnavn: "
+msgid "Server IP missing!"
+msgstr "Server-IP mangler!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfigur閞 lokalnetv鎟k..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Enable ACPI"
+msgstr "Aktiv閞 ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Drivprogram"
+msgid "Graphical Environment"
+msgstr "Grafisk milj"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Gr鎛seflade"
+msgid "on Tape Device"
+msgstr "p b錸denhed"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfigur閞 Internetadgang..."
+msgid "Do nothing"
+msgstr "G鴕 ingenting"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Vent venligst"
+msgid "Delete Client"
+msgstr "Slet klient"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Navnet p profilen der skal oprettes (den nye profil oprettes som en \n"
-"kopi af den nuv鎟ende) :"
+msgid "Filesystem type: "
+msgstr "Filsystemstype: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Ny profil..."
+msgid "Starting network..."
+msgstr "Starter netv鎟k ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Profil der skal slettes:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Slet profil..."
+msgid "/_Fields description"
+msgstr "/_Feltbeskrivelse"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netv鎟kskonfiguration (%d adaptorer)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optim閞 din sikkerhed ved at bruge Mandrake Linux"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 sk鎟mh錸dtering giver dig mulighed for grafisk indlogning p dit system "
-"med X Windowssystemet k鴕ende, og underst鴗ter flere forskellige X-sessioner "
-"p din lokale maskine samtidigt."
+msgid "Help"
+msgstr "Hj鎙p"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "V鎙ger en fremvisningsh錸dtering"
+msgid "Your personal phone number"
+msgstr "Dit personlige telefonnummer"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Hvilken st鴕relse 鴑sker du at at beholde Windows p?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Kan ikke lukke mkbootdisk ordentligt: \n"
-" %s \n"
-" %s"
+"Testsider er sendt til printeren.\n"
+"Det kan tage lidt tid f鴕 printeren starter.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kan ikke fork(): %s"
+msgid "Username required"
+msgstr "Brugernavn kr鎣et"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Der er ikke noget media, eller det er skrivebeskyttet, i enhed %s.\n"
-"Inds鎡 venligst noget."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Forsikr dig at der er et medie tilstede i enheden %s"
+"Afh鎛gigt af det foretrukne sprog du har valgt vil DrakX automatisk v鎙ge en "
+"bestemt type tastatur. Men du har m錽ke ikke et tastatur som svarer "
+"n鴍agtigt til dit sprog: for eksempel hvis du er en engelsktalende svejtser, "
+"vil du m錽ke stadig 鴑ske at dit tastatur skal v鎟e et svejtsisk tastatur. "
+"Eller hvis du taler engelsk men bor i Qu閎ec, er du m錽ke i samme "
+"situation, hvor dit modersm錶 og tastatur ikke passer sammen. I begge "
+"tilf鎙de giver dette installationstrin mulighed for at v鎙ge et passende "
+"tastatur fra listen.\n"
+"\n"
+"Klik p '%s'-tasten for at blive pr鎠enteret for den fulde \n"
+"liste af underst鴗tede tastaturer.\n"
+"\n"
+"Hvis du v鎙ger en tastaturudl鎔ning baseret p et ikke-latinsk alfabet, vil "
+"den n鎠te dialog give dig mulighed for at v鎙ge den tastekombination, der "
+"vil skifte mellem den latinske og den ikke-latinske udl鎔ning."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Opbyg disken"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Uddata"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Accept閞/afvis falske IPv4-fejlmeddelelser."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Fjern et modul"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd valgfrie argumenter"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Tilf鴍 et modul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Surf p nettet med Mozilla eller Konqueror, l鎠 din post med Evolution eller "
+"Kmail, lav dine dokumenter med OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "undg scsi-moduler"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol for resten af verden"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "hvis n鴇vendigt"
+msgid "Print test pages"
+msgstr "Udskriver testsider"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "undg raid-moduler"
+msgid "64 MB or more"
+msgstr "64 Mb eller mere"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "tving"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"V鎙g testsiderne du 鴑sker at udskrive.\n"
+"Bem鎟k: fototestsiden kan tage ret lang tid at skrive ud, og p "
+"laserprintere med for lidt hukommelse vil den m錽ke ikke skrives ud i det "
+"hele taget. Som regel vil det v鎟e nok at udskrive standard-testsiden."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd valgfrie argumenter"
+msgid "Please select the device where your %s is attached"
+msgstr "V鎙g venligst enheden hvor din %s er isat"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Ekspertomr錮e"
+msgid "Not formatted\n"
+msgstr "Ikke formateret\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "kerne-version"
+msgid "Periodic Checks"
+msgstr "Periodiske kontroller"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "standard"
+msgid "PXE Server Configuration"
+msgstr "Konfiguration af PXE-server"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Generelt"
+msgid "Backup the system files before:"
+msgstr "Lav sikkerhedskopi af systemfiler f鴕:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "fremstilling af opstartsdiskette"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Dette er standard sikkerheds-anbefalingen for en maskine\n"
+" med forbindelse til Internettet som klient. "
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "F鴕ste diskette-drev"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "St鴕relse"
+msgid "/File/_Quit"
+msgstr "/Fil/_Afslut"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Modulnavn"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Efterbehandling for afinstallering"
+msgid "Choose the new size"
+msgstr "V鎙g den nye st鴕relse"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Fjern skrifttyper p dit system"
+msgid "Media class"
+msgstr "Medieklasse"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Begyndelsestester"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s kendes ikke af denne version af Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Efterbehandling for installering"
+msgid "Faroe Islands"
+msgstr "F鎟鴈rne"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Install閞 og konvert閞 skrifttyper"
+msgid "Restart XFS"
+msgstr "Genstart XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopi閞 skrifttyper p dit system"
+msgid "Add host/network"
+msgstr "Tilf鴍 v鎟t/netv鎟k"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Fjern liste"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"hvis sat til ja, s tjek for tomme adgangskoder, for ingen adgangskode i /"
+"etc/shadow eller for andre brugere end root med id = 0."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Valgte alt"
+msgid "Please enter the directory to save to:"
+msgstr "Indtast kataloget hvortil der skal gemmes:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Fravalgte alt"
+msgid "Model name"
+msgstr "Modelnavn"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "Her hvis ikke."
+msgid "Albania"
+msgstr "Albanien"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "Klik her hvis du er sikker."
+msgid "No CDR/DVDR in drive!"
+msgstr "Ingen CDR/DVDR i drevet!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Installationsliste"
+msgid "British Indian Ocean Territory"
+msgstr "British Indian Ocean Territory"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "V鎙g skrifttypefilen eller -kataloget oh klik p 'Tilf鴍'"
+msgid "Normal Mode"
+msgstr "Normal udgave"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"F鴕 du installerer nogen skrifttyper b鴕 du v鎟e sikker p at du har lov til "
-"at bruge og installere dem p dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne p normal m錮e. I sj鎙dne tilf鎙de kan "
-"fejlbeh鎓tede skrifttyper f din X-server til at h鎛ge."
+"Forsikr dig gerne om at cron-d鎚onen er med i dine tjenester.\n"
+"Bem鎟k at alle 'net'-medier ogs bruger disken for n鎟v鎟ende."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Generelle printere"
+msgid "Printer connection type"
+msgstr "Printeropkoblingstype"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ikke nogen netv鎟ksadapter i dit system!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Netv鎟k %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "V鎙g de programpakker som vil underst鴗te skrifttyperne:"
+msgid "Option %s out of range!"
+msgstr "Valg %s er udenfor omr錮e!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright 2001-2002 ved MandrakeSoft \n"
-"\tDUPONT Sebastien (oprindelige version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" Dette program er frit programmel; du kan redistribuere det og/eller 鎛dre\n"
-" det i henhold til betingelserne i GNU General Public License, som "
-"publiceret af\n"
-" Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-" af licensen.\n"
-"\n"
-" Dette program er udgivet i h錬 om at det vil v鎟e anvendeligt, men\n"
-" UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-" SALGBARHED eller EGNETHED TIL ET BESTEMT FORM臠. Se GNU\n"
-" General Public License for flere detaljer.\n"
-"\n"
-" Du skulle have modtaget en kopi af GNU General Public License\n"
-" sammen med dette program; hvis ikke, skriv til Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Tak til:\n"
-" - pfm2afm: \n"
-"\t af Ken Borgendale:\n"
-"\t Konvert閞 en Windows .pfm-fil til en .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t af James Macnicol: \n"
-"\t type1inst genererer filerne fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t af Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Konvert閞 ttf-skrifttypefiler til afm- og pfb-skrifttyper\n"
+msgid "Connect %s"
+msgstr "Tilslut %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Om"
+msgid "Restarting CUPS..."
+msgstr "Genstarter CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Liste over skrifttyper"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Udskriver/Skanner/Fotokort p '%s'"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Avancerede muligheder"
+msgid "Duplicate mount point %s"
+msgstr "Duplik閞 monterings-sti %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Afinstall閞 skrifttyper"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "hvis sat til ja, s k鴕 chkrootkit-kontroller."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Hent skrifttyper fra Windows"
+msgid "Connection Configuration"
+msgstr "Forbindelses-konfiguration"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Import af skrifttyper"
+msgid "Unknown|Generic"
+msgstr "Ukendt|generisk"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "f鎟dig"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"P det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
+"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. Fejl "
+"er m錽ke blevet rettet, og sikkerhedsproblemer m錽ke l鴖t. Det er nu muligt "
+"for dig at hente disse ned fra internettet for at disse opdateringer kan "
+"komme dig til gode. V鎙g '%s' hvis du har en fungerende internet- "
+"forbindelse eller '%s' hvis du foretr鎘ker at installere opdaterede pakker "
+"senere.\n"
+"\n"
+"Valg af '%s' viser en liste af steder hvorfra opdateringer kan hentes. Du "
+"b鴕 v鎙ge en der er n鎟 ved dig. S vil et tr med pakkevalg fremkomme: "
+"gennemse valget og tryk '%s' for at modtage og installere den valgte pakke "
+"eller '%s' for at afbryde."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "genstart af xfs"
+msgid "Quit"
+msgstr "Afslut"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Undertryk skrifttypefiler"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Genstart XFS"
+msgid "Auto allocate"
+msgstr "Allok閞 automatisk"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Undertryk midlertidige filer"
+msgid "Check bad blocks?"
+msgstr "Led efter beskadigede blokke?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "opbyg type1inst"
+msgid "Other MultiMedia devices"
+msgstr "Andre multimedie-enheder"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "Konvertering af pfm-skrifttyper"
+msgid "No remote machines"
+msgstr "Ingen ekstern maskine"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "Konvertering af ttf-skrifttyper"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Velkommen til guiden for printerinstallation\n"
+"\n"
+"Denne guide lader dig installere printere sluttet til denne maskine.\n"
+"\n"
+"Hvis du har printere sluttet til denne maskine, s tilslut og t鎛d dem nu s "
+"de kan identificeres automatisk.\n"
+"\n"
+"Klik p \"N鎠te\" hvis du er klar og p \"Annull閞\" hvis du ikke vil "
+"installere printere nu."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencer"
+msgid "Authentication NIS"
+msgstr "Autentificering NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konvertering af skrifttyper"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Indstillingen ``Begr鎛s kommandolinie-indstillinger'' er intet v鎟d uden\n"
+"en adgangskode"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "Installation af True Type f鎟dig"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Deling af internetforbindelse er sl錯t til"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Vent venligst p ttmkfdir..."
+msgid "Card IO_0"
+msgstr "Kort IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation af True Type-skrifttyper"
+msgid "United Arab Emirates"
+msgstr "Forenede Arabiske Emirater"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopi af skrifttyper"
+msgid "Card IO_1"
+msgstr "Kort IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "S鴊 efter skrifttyper i installeret liste"
+msgid "Thailand"
+msgstr "Thailand"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "Kunne ikke finde nogen skrifttyper.\n"
+msgid "Routers:"
+msgstr "Rutere:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Genv鎙g korrekte skrifttyper"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
+msgid "Display all available remote CUPS printers"
+msgstr "V韘 alle tilg鎛gelige eksterne CUPS-printere"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "kunne ikke finde nogen skrifttyper"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installation %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "fortolk alle skrifttyper"
+msgid "Thai keyboard"
+msgstr "Thailandsk"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Frav鎙g installerede skrifttyper"
+msgid "Dialup options"
+msgstr "Opkaldsindstillinger"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "S鴊 efter installerede skrifttyper"
+msgid "Bouvet Island"
+msgstr "Bouvet-鴈n"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Hvis ingen port er angivet, vil port 631 blive brugt som standard."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Velkommen til v鎟kt鴍et til deling af internetforbindelse!\n"
-"%s\n"
+"Skift din cdrom!\n"
"\n"
-"Klik p Konfigur閞 for at starte programmet til at dele din "
-"internetforbindelse!"
+"Inds鎡 cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk p Ok, n錼 det "
+"gjort\n"
+"Hvis du ikke har den s tryk p Annull閞, s undg錽 installation fra denne cd"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Konfiguration af deling af internetforbindelse"
+msgid "Polish"
+msgstr "Polsk"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling af Internetforbindelse har aldrig v鎟et konfigureret."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Indstilling er allerede gjort. og er for n鎟v鎟ende aktiv."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Netv鎟k via webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Indstilling er allerede gjort. men er de-aktiveret for n鎟v鎟ende."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"Ingen ethernet netv鎟ksadapter er blevet fundet p dit system. K鴕 venligst "
+"v鎟kt鴍et til maskinel konfiguration."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner p dit lokale "
-"netv鎟k, ved at bruge DHCP."
+msgid "Netmask"
+msgstr "Netmaske"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
+msgid "No hard drives found"
+msgstr "Ingen diskdrev fundet"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Serien (seriel)"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfigurerer..."
+msgid "2 buttons"
+msgstr "2 knapper"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Hvad slags type er din ISDN-forbindelse?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalnetv鎟ket endte ikke med `.0', st錼 af."
+msgid "Label"
+msgstr "M鎟kat"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfigur閞 gr鎛sesnit og DHCP-server"
+msgid "Save on floppy"
+msgstr "Gem p diskette"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "St鴕ste udlejningsperiode (i sekunder)"
+msgid "Printer auto-detection"
+msgstr "Auto-opdagelse af printere"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Normal udlejningsperiode (i sekunder)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Hvilket af de f鴏gende er dit ISDN-kort?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Stutningen p DHCP-omr錮et"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS er en popul鎟 protokol til fildeling over TCP/IP netv鎟k.\n"
+"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
+"exports filen"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Begyndelsen p DHCP-omr錮et"
+msgid "Msec"
+msgstr "Msek"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Det interne dom鎛enavn"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Bem鎟k, en etikette 鎛dredes:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "DHCP-serverens IP-adresse"
+msgid "Number of capture buffers:"
+msgstr "Antal fangningsbuffere:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Denne) DHCP-servers IP-adresse"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Dit valg? (0/1, standard '%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Konfiguration af DHCP-server.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Her kan du v鎙ge forskellige muligheder for konfigurationen af DHCP-"
-"serveren.\n"
-"Hvis du ikke kender betydningen af en valgmulighed, s lad den blot v鎟e som "
-"den er.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresse p lokalnetv鎟k"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
-"en DHCP-server op; i s tilf鎙de kontroll閞 da gerne at jeg har l鎠t det "
-"netv鎟k du bruger til dit lokalnet korrekt; jeg vil ikke genkonfigurere det "
-"og jeg vil ikke r鴕e ved din konfiguration af DHCP-serveren.\n"
+"Enhver partition der netop er blevet defineret, skal formateres til brug "
+"(formatering betyder oprettelse af et filsystem).\n"
"\n"
-"Den normale DNS-indgang er den cahcendde navneserver konfigureret p "
-"bransmuren. Du kan eksempelvis erstatte denne med din ISPs DNS-adresse.\n"
+"Nu kan du ogs 鴑ske at omformatere nogle allerede eksisterende partitioner "
+"for at slette de data som de indeholder. Hvis du 鴑sker dette, s mark閞 "
+"ogs de partitioner som du 鴑sker at formatere.\n"
"\n"
-"Ellers kan jeg genkonfigurere dit gr鎛sesnit og genkonfigurere en DHCP-"
-"server for dig.\n"
+"Bem鎟k at det ikke er n鴇vendigt at omformatere alle allerede eksisterende "
+"partitioner. Det er n鴇vendigt at omformatere de partitioner, der indeholder "
+"operativsystemet (s錽om '/', '/usr' og '/var', men du er ikke n鴇t til at "
+"omformatere partitioner som du 鴑sker at beholde (typisk /home).\n"
+"\n"
+"V鎟 forsigtig med valg af partitioner; efter formatering vil alle data v鎟e "
+"slettede p de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
+"af det.\n"
+"\n"
+"Klik p '%s' n錼 du er klar til at formatere partitioner.\n"
+"\n"
+"Klik p '%s' hvis du 鴑sker at v鎙ge andre partitioner til at installere dit "
+"nye Mandrake Linux operativsystem.\n"
"\n"
+"Klik p '%s' for at v鎙ge partitioner som du 鴑sker at tjekke for d錼lige "
+"blokke."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Fransk"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tjekkisk (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "S鴊ning efter udstyr udf鴕es"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Net-enhed"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Oversigt"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Nuv鎟ende konfiguration af `%s':\n"
-"\n"
-"Netv鎟k: %s\n"
-"IP-adresse: %s\n"
-"IP-attribut: %s\n"
-"Driver: %s"
+"(parallelporte: /dev/lp0, /dev/lp1 ..., svarende til LPT1:, LPT2: ..., "
+"f鴕ste USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuelle gr鎛sesnitskonfiguration"
+msgid "Next"
+msgstr "N鎠te"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Vis aktuelle gr鎛sesnitskonfiguration"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Du kan ikke installere opstartsindl鎠eren p en %s-partition\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Nej (kun eksperter)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatisk rekonfiguration"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Advarsel, netv鎟kskortet (%s) er allerede konfigureret.\n"
"\n"
-"豱sker du en automatisk re-konfiguration?\n"
+"Velkommen.\n"
"\n"
-"Du kan g鴕e det i h錸den, men du skal vide hvad du g鴕."
+"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Netv鎟ksgr鎛sesnit allerede konfigureret"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "V鎙g hvilken netv鎟ksadapter som skal forbindes til dit lokalnet."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"pakken ImageMagick kr鎣es for at det skal fungere korrekt. Klik p 'O.k.' "
+"for at installere 'ImageMagick' eller 'Annull閞' for at afslutte"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litauisk \"talr鎘ke\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Der er kun 閚 konfigureret netv鎟ksadapter i dit system:\n"
+"De f鴏gende pakker vil blive fjernet for at kunne opdatere systemet: %s\n"
"\n"
-"%s\n"
"\n"
-"Jeg skal til at s鎡te dit lokalnet p med den adapter."
+"豱sker du virkelig at fjerne disse pakker?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Netv鎟ksgr鎛sesnit"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netv鎟ksadapter er blevet fundet p dit system. K鴕 venligst "
-"v鎟kt鴍et til maskinel konfiguration."
+msgid "NIS Domain"
+msgstr "NIS-dom鎛e"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netv鎟ksadapter i dit system!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Brugerfiler:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Gr鎛seflade %s"
+msgid "Antarctica"
+msgstr "Antarktis"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Gr鎛seflade %s (benytter modul %s)"
+msgid "Mount options"
+msgstr "Modulindstillinger"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Net-enhed"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Indtast venligst navnet p gr鎛sefladen som er koblet p internettet.\n"
-"\n"
-"Eksempler:\n"
-"\t\tppp+ for modem- eller DSL-opkoblinger, \n"
-"\t\teth0 eller eth1 for kabelopkobling eller ADSL-opkobling via "
-"lokalnetv鎟k, \n"
-"\t\tippp+ for isdn-opkobling.\n"
+"Tilordn r enheder til blokenheder (som harddisk-\n"
+"partitioner) til brug af applikationer som Oracle eller DVD-afspillere"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner p dit lokale netv鎟k kunne bruge "
-"internetforbindelsen p denne maskine.\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect f鴕 du g錼 videre.\n"
+"Argumenter: (arg, alert=1)\n"
"\n"
-"Bem鎟k: du skal bruge en dediceret netv鎟ksadapter, for at lave et lokalt "
-"netv鎟k (LAN)."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
+"Aktiv閞/deaktiv閞 beskyttelse mod spoofning af navneopslag. Hvis\n"
+"\\fIalert\\fP er sand rapporteres ogs til syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu sl錯t til"
+msgid "Please wait, preparing installation..."
+msgstr "Vent venligst, forbereder installationen"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
+msgid "Czech (QWERTZ)"
+msgstr "Tjekkisk (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
-msgstr "forkast"
+msgid "Track network card id (useful for laptops)"
+msgstr "F鴏g id for netv鎟kskort (nyttigt for b鎟bare)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "genkonfigur閞"
+msgid "The port number should be an integer!"
+msgstr "Port-nummeret b鴕 v鎟e et heltal!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "enable"
-msgstr "aktiv閞"
+msgid "You must choose an image file first!"
+msgstr "Du skal v鎙ge en biledfil f鴕st!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for n鎟v鎟ende\n"
-"Hvad 鴑sker du at g鴕e?"
+msgid "Restore from Hard Disk."
+msgstr "Genskab fra disk."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er sl錯t fra"
+msgid "Add to LVM"
+msgstr "Tilf鴍 til LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu sl錯t fra"
+msgid "DNS server"
+msgstr "DNS-server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Sl錼 servere fra..."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad og Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "deaktiv閞"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD og LPRng underst鴗ter ikke IPP printere.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad 鴑sker du at g鴕e?"
+msgid "simple"
+msgstr "simpel"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er sl錯t til"
+msgid "Clear all"
+msgstr "Slet alt"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Desv鎟re, vi underst鴗ter kun 2.4-kerner."
+msgid "No test pages"
+msgstr "Ingen testsider"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Ingen webl鎠er er installeret p dit system. Install閞 venligst 閚 hvis du "
-"鴑sker at bladre i hj鎙pesystemet."
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Sti"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklands鴈rne (Malvinas)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "gruppe:"
+msgid "Unknown model"
+msgstr "Ukendt model"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "bruger:"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "hvis sat til ja, s kontroll閞 filer og kataloger skrivbare for alle."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Valg af sti"
+msgid "authentication"
+msgstr "autentifikation"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "ved kontrol vil ejer og gruppe ikke blive 鎛dret"
+msgid "Backup Now"
+msgstr "Lav sikkerhedskopiering nu"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Brug gruppe-id ved udf鴕elsen"
+msgid "/_File"
+msgstr "/_Fil"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Brug ejers id ved udf鴕elsen"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Fjerner printer fra Star Office/OpenOffice.org/GIMP.org"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-"Brugt til katalog:\n"
-" kun ejeren af kataloget eller filen i dette katalog kan slette den"
+"Start pakkefiltrering for Linux kerne 2.2 serien for at ops鎡te en brandmur "
+"til at beskytte din maskine mod netv鎟ksangreb."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (ISCII-layout)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Creating auto install floppy..."
+msgstr "Laver autoinstallations-diskette"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Property"
-msgstr "Egenskab"
+msgid "Searching for scanners ..."
+msgstr "S鴊er efter skannere ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Rettigheder"
+msgid "Partitioning"
+msgstr "Opdeling af disk"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Current user"
-msgstr "Aktuelle bruger"
+msgid "Russia"
+msgstr "Rusland"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr "bladr"
+msgid "ethernet card(s) detected"
+msgstr "ethernet-kort detekteret"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
-msgstr "Redig閞 aktuelle regel"
+msgid "Syslog"
+msgstr "System"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
-msgstr "redig閞"
+msgid "Can't create catalog!"
+msgstr "Kan ikke oprette katalog!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Slet valgte regel"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Fuldf鴕 din sikkerhedsops鎡ning med dette meget brugervenlige programmel som "
+"kombinerer h鴍ydelseskomponenter som brandmur, en server og klient for "
+"virtuelle private netv鎟k (VPN), et indbrudsopdagelsessystem og en "
+"trafikadministrator."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "delete"
-msgstr "slet"
+msgid "Not enough free space for auto-allocating"
+msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Tilf鴍 en ny regel i slutningen"
+msgid "Set root password"
+msgstr "S鎡 root-adgangskode"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "add a rule"
-msgstr "Tilf鴍 en regel"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Der findes ingen fri driver for lydkortet (%s) men der er en leverand鴕ejet "
+"driver p '%s'"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Flyt valgte regel et niveau ned"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Efter 鎛dring af st鴕relsen af partition %s vil alle data p denne partition "
+"g tabt"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Down"
-msgstr "Ned"
+msgid "Internet connection configuration"
+msgstr "Konfiguration af Internetforbindelse"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Flyt valgte regel et niveau op"
+msgid "Scanning for TV channels"
+msgstr "Skanner for tv-kanaler"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
-msgstr "Op"
+msgid "Kernel:"
+msgstr "Kerne:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "v鎙g perm-fil at se eller redigere"
+msgid "/_About..."
+msgstr "/_Om..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm bruges til at se filer i brug for at rette tilladelser, ejere og "
-"grupper via msec.\n"
-"Du kan ogs redigere dine egne regler som vil tilsides鎡te standard-reglerne."
+msgid "Bengali"
+msgstr "Bengali"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "permissions"
-msgstr "rettigheder"
+msgid "Preference: "
+msgstr "Pr鎓erence: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "group"
-msgstr "gruppe"
+msgid "Wizard..."
+msgstr "Vejleder..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "user"
-msgstr "bruger"
+msgid "Services: %d activated for %d registered"
+msgstr "Tjenester: %d aktiverede for %d registrerede"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "path"
-msgstr "sti"
+msgid "Create a bootdisk"
+msgstr "Opret opstartsdiskette"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Placering af auto_installations .cfg-fil"
+msgid "Solomon Islands"
+msgstr "Salomon鴈rne"
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Angiv venligst hvor auto_install.cfg-filen er placeret.\n"
-"\n"
-"Lad den v鎟e blank hvis du ikke 鴑sker at ops鎡te en automatisk "
-"installationstilstand.\n"
-"\n"
+msgid "(module %s)"
+msgstr "(modul %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Intet CD- eller DVD-aftryk fundet, kopi閞 venligst installationsprogrammet "
-"og rpm-filerne."
+msgid "Workgroup"
+msgstr "Arbejdsgruppe"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "Intet aftryk fundet!"
+msgid "Printer host name or IP"
+msgstr "V鎟tsnavn eller IP-adresse p printer mangler!"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installation image directory"
-msgstr "Katalog for installationsaftryk"
+msgid "Host Path or Module"
+msgstr "Stil til v鎟t eller modul"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Angiv venligst hvor installationsaftrykket vil v鎟e tilg鎛geligt.\n"
-"\n"
-"Hvis du ikke har et eksisterende katalog, s kopi閞 venligst indholdet af "
-"CD'en eller DVD'en.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Navn p printer b鴕 kun indeholde bogstaver, tal og understregen _"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "Stutnings-ip p DHCP"
+msgid "Show current interface configuration"
+msgstr "Vis aktuelle gr鎛sesnitskonfiguration"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Begyndelses-ip p DHCP"
+msgid "Development"
+msgstr "Udvikling"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP-serveren vil muligg鴕e at andre maskiner kan starte op med PXE ved brug "
-"af det opgivne adresseomr錮e.\n"
-"\n"
-"Netv鎟ksadressen er %s med en netmaske p %s.\n"
-"\n"
+msgid "Done"
+msgstr "F鎟dig"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Gr鎛seflade %s (p netv鎟k %s)"
+msgid "Web Server"
+msgstr "Webserver"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "V鎙g hvilken netv鎟ksgr鎛seflade som skal bruges til dhcp-serveren."
+msgid "\tDo not include System Files\n"
+msgstr "\tMedtag ikke systemfiler\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Chile"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Du er ved at konfigurere din maskine til at installere en PXE-server som en "
-"DHCP-server og en TFTP-server for at bygge en installationsserver.\n"
-"Med denne mulighed vil andre maskiner p dit lokale netv鎟k kunne "
-"installeres ved brug af denne maskine.\n"
+"Printerdriverne til inkjet som leveres af Lexmark underst鴗ter kun lokale "
+"printere, ikke printere p eksterne maskiner eller printserverbokse. Forbind "
+"din printer til en lokal port eller konfigur閞 den p den maskine, den er "
+"forbundet til."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect f鴕 du g錼 videre.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Din multifunktionsenhed blev konfigureret automatisk til at kunne skanne. Nu "
+"kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive skanneren "
+"hvis du har mere end 閚) fra kommandolinjen eller med de grafiske "
+"gr鎛seflader 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du ogs "
+"skanne ved at v鎙ge det rigtige punkt i menuen 'Filer/Hent'. Brug ogs 'man "
+"scanimage' p kommandolinjen for at f mere information\n"
"\n"
-"Bem鎟k: du skal bruge en dediceret netv鎟ksadapter, for at lave et lokalt "
-"netv鎟k (LAN)."
+"Brug ikke \"scannerdrake\" p denne enhed!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfiguration af installations-server"
+msgid "(already added %s)"
+msgstr "(har allerede tilf鴍et %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfiguration af PXE-server"
+msgid ", using command %s"
+msgstr ", med kommando %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Vent venligst, s鎡ter sikkerhedstilvalg..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt og Shift-taster samtidigt"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Vent venligst, s鎡ter sikkerhedsniveau..."
+msgid "Flags"
+msgstr "Flag"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Periodiske kontroller"
+msgid "Add/Del Users"
+msgstr "Tilf鴍/slet brugere"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Systemtilvalg"
+msgid "Host/network IP address missing."
+msgstr "IP-adresse p v鎟t eller netv鎟k mangler."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "Netv鎟kstilvalg"
+msgid "weekly"
+msgstr "ugentligt"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Indstillinger"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Den indtastede v鎟t/netv鎟k er ikke korrekt.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Her er den komplette liste over tilg鎛gelige lande"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternativ testside (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"De f鴏gende tilvalg kan s鎡tes for at tilpasse din\n"
-"systemsikkerhed. Hvis du har brug for forklaringer kan du kigge p "
-"Hj鎙petipsene.\n"
+"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
+"Hvis du ikke har nogen af disse cd'er, klik Annull閞.\n"
+"Hvis kun nogen cd'er mangler, frav鎙g dem, og klik s Ok."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Sikkerhedsadministrator:"
+msgid "Wait please"
+msgstr "Vent venligst"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Sikkerhedsp錷indelser:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Sikkerhedsniveau:"
+msgid "Backup user files"
+msgstr "Lav sikkerhedskopi af brugerfiler"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(Forvalgt: %s)"
+msgid "New"
+msgstr "Ny"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standard: Dette er den normale sikkerhed anbefalet for en maskine der vil "
-"blive brugt til at \n"
-" k鴕e p internettet som en klient.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"H鴍: Her er en del restriktioner, og flere automatiske kontroller vil "
-"blive k鴕t hver nat.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"H鴍ere: Sikkerheden er nu h鴍 nok til at bruge systemet som en server som "
-"kan tage imod forbindelser fra mange klienter. Hvis din "
-"maskine kun er en klient p internettet, b鴕 du\n"
-"\t v鎙ge et lavere niveau.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoid: Dette er svarende til det foreg錯nde niveau, men systemet er helt "
-"lukket og\n"
-" sikkerhedsfaciliteter er p deres h鴍este\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Sikkerhedsadministrator:\n"
-" Hvis 'Sikkerhedsp錷indelser' valgmuligheden er sat, vil "
-"sikkerhedp錷indelser blive sendt til denne bruger (brugernavn eller "
-"epostadresse)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
+"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
+"og er den eneste bruger, der har lov til at lave opdateringer, tilf鴍e "
+"brugere, 鎛dre i den overordnede systemkonfiguration og s videre. Kort "
+"sagt, root kan g鴕e alt! Derfor skal du v鎙ge en adgangskode der er sv鎟 at "
+"g鎡te - DrakX vil fort鎙le dig hvis adgangskoden du valgte er for nem. Som "
+"v韘t er du ikke tvunget til at indtaste en adgangskode, men vi advarer dig "
+"p det kraftigste mod dette. GNU/Linux er lige s udsat for behandlingsfejl "
+"som andre operativsystemer. Da root kan overvinde alle forhindringer og "
+"uforvarende slette alle data p partitioner ved sorgl鴖t at behandle "
+"partitionerne selv, er det vigtigt at det er vanskeligt at blive root.\n"
"\n"
+"Adgangskoden b鴕 v鎟e en blanding af bogstaver og tal og mindst 8 tegn "
+"langt. Skriv aldrig en adgangskode ned for root - det g鴕 det alt for nemt "
+"at bryde ind i et system.\n"
"\n"
+"G鴕 dog ikke adgangskoden for lang eller kompliceret da du skal v鎟e i stand "
+"til at huske den uden for stort besv鎟!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Adgangskoden vil ikke blive vist p sk鎟men n錼 du indtaster den. Du skal "
+"derfor indtaste adgangskoden to gange, for at begr鎛se risikoen for "
+"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
+"denne 'ukorrekte' adgangskode v鎟e den du skal bruge f鴕ste gang du "
+"forbinder dig til systemet.\n"
"\n"
+"Hvis du 鴑sker at adgang til denne maskine skal v鎟e styret af en "
+"autenticerings-server, s klik p '%s'-knappen.\n"
"\n"
+"Hvis dit netv鎟k bruger LDAP, NIS eller PDC Windows dom鎛e-"
+"autentificeringstjenester, v鎙g da den rigtige som '%s'. Hvis du ikke v閐 "
+"hvilken der skal bruges, s b鴕 du sp鴕ge din systemadministrator.\n"
"\n"
-"Bem鎟k: Hvis du har et ISA PnP lydkort skal du bruge programmet sndconfig. "
-"Du skal blot indtaste \"sndconfig\" i et konsol-program."
+"Hvis du har problemer med at huske adgangskoder, s kan du v鎙ge '%s' hvis "
+"din maskine ikke vil v鎟e forbundet til Internettet, og du stoler p alle "
+"som kan f adgang til maskinen. "
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Intet lydkort blev genkendt p din maskine. Tjek venligst at et lydkort der "
-"underst鴗tes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan bes鴊e vores database over udstyr p:\n"
-"\n"
+"Nu vil DrakX give dig mulighed for at v鎙ge det 鴑skede sikkerhedsniveau for "
+"maskinen. Hovedreglen er at sikkerhedsniveauet b鴕 s鎡tes h鴍ere, hvis "
+"maskinen skal indeholde vigtige data, eller hvis makinen vil v鎟e direkte "
+"offentligt p Internettet. Men et h鴍ere sikkerhedsniveau vindes normalt p "
+"bekostning af letheden af anvendelsen.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Intet lydkort genkendt!"
+"Hvis du ikke v閐 hvad du skal v鎙ge, s behold den foresl錯de mulighed."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s smugkig af opstartssk鎟m (%s)"
+msgid "Load from floppy"
+msgstr "Indl鎠 fra diskette"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Genererer smugkig ..."
+msgid "The following printer was auto-detected. "
+msgstr "De f鴏gende printere blev fundet automatisk:"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Du skal v鎙ge en biledfil f鴕st!"
+msgid "Boot Floppy"
+msgstr "Start fra diskette"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Valg af farve for forl鴅slinje"
+msgid "Norwegian"
+msgstr "Norsk"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Dette tema har endnu ikke nogen startsk鎟m i %s!"
+msgid "Searching for new scanners ..."
+msgstr "S鴊er efter nye skannere..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "gemmer startsk鎟mstema..."
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Server"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "v鎙g billedfil"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Serie af processoren (undermodel- (generations) nummer)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "v鎙g billede"
+msgid "select path to restore (instead of /)"
+msgstr "v鎙g sti at genskabe (i stedet for /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Konfigur閞 startsk鎟msbilled"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Skjul kernens beskeder som standard"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Vis logo p konsol"
+msgid "China"
+msgstr "Kina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "v鎙g farve"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Forsikr dig om at alle dine printere er tilsluttede og t鎛dte).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "gem temaer"
+msgid "Georgia"
+msgstr "Georgien"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "smugkig"
+msgid "Reading data of installed printers..."
+msgstr "L鎠er data for nye printere..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "farven p forl鴅slinjen"
+msgid " Erase Now "
+msgstr " Slet nu "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "h鴍den p forl鴅slinjen"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "bredden p forl鴅slinjen"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Inds鎡 en tom diskette i diskette-drev %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"y-koordinatet for forl鴅sindikatorens\n"
-"鴙re venstre hj鴕ne"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "ja betyder at processoren har en aritmetisk koprocessor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"x-koordinatet for forl鴅sindikatorens\n"
-"鴙re venstre hj鴕ne"
+msgid "Please Wait... Applying the configuration"
+msgstr "Vent venligst... S鎡ter konfigurationen i anvendelse"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the suggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "h鴍de p tekstrude"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Velkommen til GRUB styresystemsv鎙geren!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "tekstbredde"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr "antal tegn i tekstrudens y-led"
+msgid "SCSI controllers"
+msgstr "SCSI-kontrolkort"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr "antal tegn i tekstrudens x-led"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " p LPD-server \"%s\", printer \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Bladr"
+msgid "Choosing a display manager"
+msgstr "V鎙ger en fremvisningsh錸dtering"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Tema-navn"
+msgid "Zeroconf Host name"
+msgstr "Zeroconf-v鎟tsnavn"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "endelig opl鴖ning"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP adresse b鴕 have formatet 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "opretter f鴕ste trin"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"pakken ImageMagick kr鎣es for at det skal fungere korrekt. Klik p 'O.k.' "
-"for at installere 'ImageMagick' eller 'Annull閞' for at afslutte"
+msgid "Add an item"
+msgstr "Tilf鴍 et element"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Intet tv-kort blev genkendt p din maskine. Tjek venligst at et video/tv-"
-"kort der underst鴗tes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan bes鴊e vores database over udstyr p:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Printerne p denne maskine er tilg鎛gelige for andre maskiner"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Intet tv-kort genkendt!"
+msgid "I can't find needed image file `%s'."
+msgstr "Jeg kan ikke finde filen '%s' som jeg beh鴙er."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nu kan du k鴕e xawtv (under X Window!)!\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Intet lydkort genkendt. Pr鴙 at k鴕e \"harddrake\" efter installation"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Hav det godt!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Ugyldig port angivet: %s.\n"
+"Det korrekte format er \"port/tcp\" eller \"port/udp\", \n"
+"hvor port er mellem 1 og 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV er ikke installeret!"
+msgid "Shell"
+msgstr "Skal"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Der opstod en fejl ved skanningen efter tv-kanaler"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Skanner for tv-kanaler"
+msgid "Sao Tome and Principe"
+msgstr "S鉶 Tom og Pr韓cipe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Skanning for tv-kanaler i gang..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "Kan ikke logge ind med brugernavn %s (forkert adgangskode?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Omr錮e:"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidiansk (latin)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "Tv-standard:"
+msgid "Package not installed"
+msgstr "Pakke ikke installeret"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Indtast din tv-standard og land"
+msgid "Become a MandrakeExpert"
+msgstr "Bliv en MandrakeEkspert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australsk Optus kabel-tv"
+msgid "American Samoa"
+msgstr "Amerikansk Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "New Zealand"
+msgid "Protocol"
+msgstr "Protokol"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Frankrig [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "Kopi閞 skrifttyper p dit system"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "豷teuropa"
+msgid "Harddrake help"
+msgstr "Harddrake hj鎙p"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "Vesteuropa"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Kina (broadcast)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Konfiguration af Mandrake Terminalserver"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Rapportdetaljer\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
+msgid "Restore all backups"
+msgstr "Genskab alle sikkerhedskopier"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
+msgid "if set to yes, check open ports."
+msgstr "hvis sat til ja, s tjek 錬ne porte."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Det kan tage lidt tid at slette mediet."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kabel)"
+msgid "You can't select/unselect this package"
+msgstr "Du kan ikke v鎙ge/frav鎙ge denne pakke"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
+msgid "Warning"
+msgstr "Advarsel"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV er ikke installeret!\n"
-"\n"
-"\n"
-"Hvis du har et tv-kort, men DrakX hverken har fundet det (intet bttv\n"
-"eller saa7134 modul i \"/etc/modules\") eller installeret xawtv, s indsend "
-"venligst\n"
-"resultaterne af \"lspcidrake -v -f\" til \"install\\@mandrakesoft.com\"\n"
-"med emnet \"undetected TV card\".\n"
"\n"
-"\n"
-"Du kan installere det ved at indtaste \"urpmi xawtv\" som root, p en "
-"kommandolinje."
+"- Andre filer:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "prim鎟"
+msgid "Remote host name"
+msgstr "Eksternt v鎟tsnavn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "sekund鎟"
+msgid "deactivate now"
+msgstr "deaktiv閞 nu"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Klik p en enhed i det venstre tr for at vise dets oplysninger h閞."
+msgid "access to X programs"
+msgstr "adgang til X-programmer"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Ukendt"
+msgid "Computing the size of the Windows partition"
+msgstr "Beregner st鴕relsen p Windows-partitionen"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "ukendt"
+msgid "Italy"
+msgstr "Italien"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "K鴕er \"%s\" ..."
+msgid "Name of printer"
+msgstr "Navn p printer"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "K鴕 konfigurationsv鎟kt鴍"
+msgid "disable"
+msgstr "deaktiv閞"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Konfigur閞 modul"
+msgid "error unmounting %s: %s"
+msgstr "fejl ved afmontering af %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Informationer"
+msgid "Do it!"
+msgstr "G鴕 det!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Fundet maskinel"
+msgid "Cayman Islands"
+msgstr "Cayman鴈rne"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 version "
+msgid "%s not responding"
+msgstr "%s svarer ikke"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "S鴊ning udf鴕es"
+msgid "Select model manually"
+msgstr "V鎙g model manuelt"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Forfatter:"
+msgid "Format"
+msgstr "Format閞"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Dette er HardDrake, et Mandrake-v鎟kt鴍 for konfigurering af maskinel.\n"
-"Version:"
+"Den mest almindelige m錮e at forbinde med ADSL er pppoe.\n"
+"Nogen forbindelser bruger pptp, og nogle f bruger DHCP.\n"
+"Hvis du ikke ved noget, v鎙g 'brug pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Om Harddrake"
+msgid "Various"
+msgstr "Diverse"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Om..."
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Rapport閞 fejl"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Printerdrake kunne ikke finde ud af hvilken model din printer %s er. V鎙g "
+"venligst den korrekte model fra listen."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"N錼 du har valgt en enhed kan du se enhedsinformationen p felter som vises "
-"i den h鴍re ramme (\"Information\")"
+"\n"
+"V鎙g printerene som du vil overflytte og klik\n"
+"\"Overf鴕\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "V鎙g en enhed!"
+msgid "PDQ"
+msgstr "PDQ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albansk"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Litauen"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompakt"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Fandt model: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft har udvalgt det bedste programmel til dig"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
msgstr ""
-"Beskrivelse af felterne:\n"
+"Dette er HardDrake, et Mandrake-v鎟kt鴍 for konfigurering af maskinel.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake hj鎙p"
+msgid "Local files"
+msgstr "Lokale filer"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Feltbeskrivelse"
+msgid "maybe"
+msgstr "m錽ke"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Hj鎙p"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Afslut"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Grafikkortet ser ud til at have en TV-UD-forbindelse.\n"
+"Den kan konfigureres s den fungerer med billedbuffer\n"
+"\n"
+"Til dette skal du tilslutte grafikkortet til tv'et inden du starter "
+"maskinen.\n"
+"V鎙g dern鎠t indgangen \"TVout\" i starth錸tereren.\n"
+"\n"
+"Har du denne funktion?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Autodetekt閞 _jazz-drev"
+msgid "Monitor"
+msgstr "Sk鎟m"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Auto-detekt閞 modemmer"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Du er ved at ops鎡te udskrivning til en Windows-konto med adgangskode. "
+"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
+"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
+"til at sende printjobbet til Windows-serveren. S det er muligt for enhver "
+"bruger p denne maskine at vise adgangskoden p sk鎟men ved at angive "
+"kommandoer som 'ps auxwww'.\n"
+"\n"
+"Vi anbefaler at bruge en af de f鴏gende alternativer (i alle tilf鎙de skal "
+"du forsikre dig om at kun maskiner fra dit lokalnetv鎟k har adgang til din "
+"Windows-server, for eksempel ved hj鎙p af en brandmur):\n"
+"\n"
+"Brug en konto uden adgangskode p din Windows-server, s錽om 'GUEST'-kontoen "
+"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
+"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
+"konto.\n"
+"\n"
+"Ops鎡 din Windows-server s printeren er tilg鎛gelig under LPD-protokollen. "
+"Ops鎡 dern鎠t udskrift fra denne maskine med '%s'-opkoblingstypen i "
+"Printerdrake.\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Auto-detekt閞 printere"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tusinde farver (16 bit)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Indstillinger"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Gem til diskdrev p stien: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "navnet p producenten af processoren"
+msgid "Size: %d KB\n"
+msgstr "St鴕relse: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "navnet p producenten af enheden"
+msgid "Remove fonts on your system"
+msgstr "Fjern skrifttyper p dit system"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Bustypen som musen er forbundet til"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Advarsel, netv鎟kskortet (%s) er allerede konfigureret.\n"
+"\n"
+"豱sker du en automatisk re-konfiguration?\n"
+"\n"
+"Du kan g鴕e det i h錸den, men du skal vide hvad du g鴕."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Serie af processoren (undermodel- (generations) nummer)"
+msgid "Graphical interface at startup"
+msgstr "Start X ved systemstart"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Modelserie"
+msgid "Please enter the directory to save:"
+msgstr "Indtast kataloget der skal gemmes:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Disketteformater som drevet accepterer"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "nummeret p processoren"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Processor-ID"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"De f鴏gende printere er konfigureret. Dobbeltklik p en printer for at 鎛dre "
+"dens indstillinger, for at g鴕e den til standard-printer, eller for at se "
+"information om den."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "port for netv鎟ksprinter"
+msgid "Connected"
+msgstr "Tilsluttet"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "navnet p CPU'en"
+msgid "USB printer \\#%s"
+msgstr "USB-printer \\/#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "Navn"
+msgid "Macedonian"
+msgstr "Makedonisk"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "antal knapper som musen har"
+msgid "Bridges and system controllers"
+msgstr "Broer og system-kontrolkort"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "Antal knapper"
+msgid "/File/_Save"
+msgstr "/Fil/_Gem"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Officielt producentnavn p processoren"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "Modelnavn"
+msgid "No details"
+msgstr "Ingen detaljer"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Processorens generation ( fx 8 for PentiumIII,...)"
+msgid "very nice"
+msgstr "meget rart"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Model"
+msgid "Preview"
+msgstr "smugkig"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "Disk-model"
+msgid "Remote Control"
+msgstr "Ekstern kontrol"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "Klasse af maskinenhed"
+msgid "Please select media for backup..."
+msgstr "V鎙g medie for sikkerhedskopi..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "Medieklasse"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86-server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Undergeneration af cpu'en"
+msgid "Allow Thin Clients"
+msgstr "Tillad tynde klienter"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Niveau"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgisk (russisk layout)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Disketteformater som drevet accepterer"
+msgid "/_Options"
+msgstr "/_Indstillinger"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Disketteformat"
+msgid "Your printer model"
+msgstr "Din printermodel"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"Nogen af de tidlige i486DX-100-chip kan ikke altid returnere til k鴕ende "
-"tilstand efter 'halt'-instruktionen er brugt"
+"\n"
+"\n"
+"(ADVARSEL! Du bruger XFS til din root-partition,\n"
+"oprettelse af en opstartsdiskette p en 1.44 Mb diskette vil formentlig\n"
+"mislykkes, fordi XFS kr鎣er en meget stor driver)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt-fejl"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Slet tar-filer p disken efter sikkerhedskopiering.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Tidlige pentiummer var fejlbeh鎓tede og fr鴖 vwd afkodning af bytekoden F00F"
+"Intet CD- eller DVD-aftryk fundet, kopi閞 venligst installationsprogrammet "
+"og rpm-filerne."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f-fejl"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrakes multifunktions konfigurationsv鎟kt鴍"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
+msgid "Save"
+msgstr "Gem"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Om FPU-en har en irq-vektor"
+msgid "The %s is unsupported"
+msgstr "Denne %s er ikke underst鴗tet"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ja betyder at processoren har en aritmetisk koprocessor"
+msgid "Load the drivers for your usb devices."
+msgstr "Indl鎠 driverne for dine usb-enheder."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Er FPU tilstede"
+msgid "Disk"
+msgstr "Disk"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter a printer device URI"
+msgstr "Indtast en printerenheds-URI"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Tidlige Intel Pentium chips har en bug i deres flydendetalsprocessor, "
-"hvilket g鴕 at de ikke kan lave den kr鎣ede precision n錼 de udf鴕er en "
-"flydendetalsdivision (FDIV)"
+"MandrakeSofts succes er baseret p princippet om frit programmel. Dit nye "
+"operativsystem er resultatet af et samarbejde i det verdensomsp鎛dende Linux-"
+"samfund"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv-fejl"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flag rapporteret af kernen"
+msgid "French Guiana"
+msgstr "Fransk Guinea"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flag"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modulet i GNU/Linux-kernen som h錸dterer denne enhed"
+msgid "add a rule"
+msgstr "Tilf鴍 en regel"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "A command line must be entered!"
+msgstr "En kommandolinje skal opgives!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Nyt dynamisk enhedsnavn genereret af den k鴕ende kernes devfs"
+msgid "Select user manually"
+msgstr "H錸dpluk bruger"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Ny devfs-enhed"
+msgid "Transfer printer configuration"
+msgstr "Overf鴕 printerkonfiguration"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "gammel statisk enhedsnavn brugt i dev-pakke"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Vil du aktivere udskrift p printerne som n鎣nes ovenfor?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Gammel enhedsfil"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"For at dette kan virke p en W2K PDC skal du nok have administratoren til at "
+"k鴕e: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add og genstarte serveren.\n"
+"Du skal ogs have et brugernavn og en adgangskode for at maskinen kan "
+"tilsluttes Windows(TM)-dom鎛et.\n"
+"Hvis netv鎟ket ikke er aktiveret vil Drakx pr鴙e at slutte til dom鎛et efter "
+"trinnet med ops鎡ning af netv鎟k.\n"
+"Skulle denne ops鎡ning fejle af nogen 錼sag, og dom鎛eautentifikation ikke "
+"virke, s k鴕 'smbpasswd -j DOMAIN -U USER%%PASSWORD' med dit Windows(tm) "
+"dom鎛e og administrators brugernavn/adgangskode, efter genstart af "
+"systemet.\n"
+"Kommandoen 'wbinfo -t' vil afpr鴙e om dine hemmelige autentifikationsdata er "
+"i orden."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Dette felt beskriver enheden"
+msgid "%s (Port %s)"
+msgstr "%s (port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "Brug netv鎟ksforbindelse til sikkerhedskopiering"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"CPU-frekvensen i MHz (Megahertz, hvilket som en f鴕ste tiln鎟melse kan groft "
-"regnes som antal instruktioner cpu'en kan udf鴕e per sekund)"
+"Argumenter: (arg)\n"
+"\n"
+" Aktiv閞/deaktiv閞 sulogin(8) p enkeltbrugerniveau."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvens (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Det er nu tid til at angive hvilke pakker du vil installere p dit system. "
+"Der er tusindvis af pakker til dit Mandrake Linux system, og for at g鴕e det "
+"nemmere at h錸dtere dem er pakker blevet placeret i grupper af lignende "
+"programmer.\n"
+"\n"
+"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
+"maskine. Mandrake Linux har 4 foruddefinerede installationer tilg鎛gelige. "
+"Du kan t鎛ke p installationsklasserne som beholdere for forskellige pakker. "
+"Du kan v鎙ge og vrage programmer fra de forskellige grupper, s en "
+"installation af 'Arbejdsstation' kan ogs have programmer fra "
+"udviklingsgruppen installeret.\n"
+"\n"
+" * '%s': Hvis din maskine skal bruges som en arbejdsstation, v鎙g da en "
+"eller flere af programmerne der er i arbejdsstationsgruppen.\n"
+"\n"
+" * '%s': hvis du vil bruge maskinen til programmering v鎙g da de relevante "
+"pakker fra denne gruppe.\n"
+"\n"
+" * '%s': hvis det er planen at maskinen skal v鎟e en server, s v鎙g de mere "
+"almindelige tjenester, som du 鴑sker at installere p maskinen.\n"
+"\n"
+" * '%s': her skal du v鎙ge foretrukne grafiske milj. V鎙g mindst 閠, hvis "
+"du 鴑sker at have en grafisk gr鎛seflade tilg鎛gelig.\n"
+"\n"
+"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
+"denne gruppe. Hvis du ikke v鎙ger nogen grupper ved installation (i "
+"mods鎡ning til en opgradering), vil en dialog komme frem som foresl錼 dig "
+"forskellige former for minimal installation: \n"
+"\n"
+" * '%s' installerer de f鎟rest mulige antal pakker for at f en fungerende "
+"grafisk arbejdsstation.\n"
+"\n"
+" * '%s' installerer det basale system plus basale nytteprogrammer og "
+"tilh鴕ende dokumentation. Denne installation er passende til at s鎡te en "
+"server op.\n"
+"\n"
+" * '%s' vil installere det absolut mindst mulige antal pakker n鴇vendigt for "
+"at f et virkende Linux-system. Med denne installation f錽 kun en "
+"gr鎛seflade med kommandolinjer. Den totale st鴕relse af denne installation "
+"er omkring 65 megabyte.\n"
+"\n"
+"Du kan afkrydse boksen '%s', hvilket er nyttigt, hvis du kender de tilbudte "
+"pakker godt, eller hvis du 鴑sker at have fuld kontrol over hvad der skal "
+"installeres.\n"
+"\n"
+"Hvis du har startet installationen i '%s'-tilstand, kan du frav鎙ge alle "
+"grupper for at undg at installere nogen nye pakker. Dette er nyttigt ved "
+"reparation eller opdatering af det eksisterende system."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Informationsniveau som kan opn錽 via cpuid-instruktionen"
+msgid "Accept user"
+msgstr "Accept閞 bruger"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "CPUid-niveau"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Processorens familie (fx 6 for i686-klasse)"
+msgid "Bad choice, try again\n"
+msgstr "D錼ligt valg, pr鴙 igen\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid-familie"
+msgid "Heard and McDonald Islands"
+msgstr "Heard- og McDonald-鴈rne"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Om denne processor har Cyrix 6x86 Coma-fejlen eller ej"
+msgid "No alternative driver"
+msgstr "Intet alternativ drivprogram"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma-fejl"
+msgid "Toggle to expert mode"
+msgstr "Normal -> Ekspert"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"specielle kapaciteter for driveren (br鎛demulighed eller DVD-underst鴗telse)"
+msgid "(on this machine)"
+msgstr "(p denne maskine)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Kapacitet for drevet"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway-adresse skal have formatet 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "St鴕relse p (andet niveau) cpu-mellemlagret"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+"\"%s\" baseret winmodem opdaget, 鴑sker du at installere kr鎣et programmel?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "St鴕relse p cachen"
+msgid "Looking at packages already installed..."
+msgstr "Leder efter pakker der allerede er installeret..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- pci-enheder: dette giver PCI slottet, enheden og funktionen for dette "
-"kort\n"
-"- eide-enheder: enheden er enten en slave- eller mester-enhed\n"
-"- scsi-enheder: scsi-bussen og scsi enheds-id'er"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "Plads p bussen"
+msgid "Driver"
+msgstr "Drivprogram"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- PCI- og USB-enheder: dette viser producenten, enheden, underproducent og "
-"underenhed PCI/USB id'er"
+"Linuxconf vil nogen gange arrangere udf鴕else af forskellige opgaver ved "
+"opstart for at vedligeholde systemkonfigurationen."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Bus-identifikation"
+msgid "Printer on remote lpd server"
+msgstr "Printer p ekstern lpd server"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"GNU/Linux-kernen skal k鴕e en bergningsl鴎ke ved opstaten for at "
-"initialisere en tidst鎙ler. Dets resultat lagres som bogomips som en m錮e at "
-"m錶e hastigheden p cpu'en."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"F鴕 du installerer nogen skrifttyper b鴕 du v鎟e sikker p at du har lov til "
+"at bruge og installere dem p dit system. \n"
+"\n"
+"-Du kan installere skrifttyperne p normal m錮e. I sj鎙dne tilf鎙de kan "
+"fejlbeh鎓tede skrifttyper f din X-server til at h鎛ge."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI-kanal"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot er en systemopstarter til NewWorld MacIntosh-maskinel. Den kan starte "
+"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p din maskine. "
+"S鎑vanligvis vil disse andre styresystemer blive korrekt opdaget og "
+"installeret. Hvis dette ikke skulle v鎟e tilf鎙det kan du her tilf鴍e en "
+"indgang i h錸den. V鎟 omhyggelig med at v鎙ge de korrekte parametre.\n"
+"\n"
+"Yaboots hovedvalg er:\n"
+"\n"
+" * Init-besked: En enkel tekstbesked som vises f鴕 valg af opstart.\n"
+"\n"
+" * Opstartsenhed: Angiver hvor du 鴑sker at placere informationen som er "
+"n鴇vendig for at starte GNU/Linux. Du vil generelt have indstillet en "
+"bootstrap-partition tidligere til at have denne information.\n"
+"\n"
+" * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
+"mulige med yaboot. Den f鴕ste forsinkelse bliver m錶t i sekunder og du kan "
+"ved det punkt v鎙ge mellem CD, OF-opstart, MacOS eller Linux.\n"
+"\n"
+" * Ventetid f鴕 kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
+"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder f鴕 din "
+"forvalgte kernebeskrivelse bliver valgt.\n"
+"\n"
+" * Aktiv閞 CD-opstart?: Hvis du v鎙ger dette valg vil du kunne trykke 'C' "
+"for CD ved det f鴕ste opstartsvalg.\n"
+"\n"
+" * Aktiver OF-opstart?: Hvis du v鎙ger dette valg vil du kunne trykke 'N' "
+"for 'Open Firmware' ved det f鴕ste opstartsvalg.\n"
+"\n"
+" * Forvalgt styresystem: Du kan v鎙ge hvilket forvalgt styresystem der skal "
+"startes n錼 Open Firmwareforsinkelsen er udl鴅et."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid "No mouse"
+msgstr "Ingen mus"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "dette er den fysiske bus som enheden er tilsuttet (fx PCI, USB, ...)"
+msgid "Germany"
+msgstr "Tyskland"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "Austria"
+msgstr "豷trig"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "listen af alternative drivprogrammer for dette lydkort"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "K鴕 \"sndconfig\" efter installation for at konfigurere dit lydkort"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternative drivprogrammer"
+msgid "Collapse Tree"
+msgstr "Sammenfold tr"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
+msgid "Auto Install Configurator"
+msgstr "Autoinstallationskonfigurering"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "V鎙g tastaturlayout."
+msgid "Configure networking"
+msgstr "Konfigur閞 netv鎟k"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte levende opgradering!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Hvor vil du placere opstartsprogrammet?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Inds鎡 installations-cdrom'en i dit cdrom-drev og tryk p Ok, n錼 det gjort\n"
-"Hvis du ikke har den - tryk p Annull閞, s undg錽 levende opgradering"
+"Dit valg af foretrukkent sprog vil p鍁irke sproget for dokumentationen, "
+"installeringen og systemet generelt. V鎙g f鴕st den verdensdel du befinder "
+"dig i, og s det sprog, du taler.\n"
+"\n"
+"Hvis du klikker p '%s'-knappen kan du v鎙ge andre sprog, der installeres "
+"p maskinen, og derved installeres de sprogspecifikke filer for "
+"systemdokumentation og programmer. Hvis du for eksempel bev鎟ter folk fra "
+"Spanien p din maskine, v鎙g da engelsk som standardsproget i tr-visningen, "
+"og '%s' i den avancerede afdeling.\n"
+"\n"
+"Bem鎟k at du ikke er begr鎛set til at v鎙ge et enkelt yderligere sprog. Du "
+"kan v鎙ge flere sprog, eller endog installere dem alle ved at markere '%s'-"
+"boksen. Valg af underst鴗telse for et sprog betyder at overs鎡telser, "
+"skrifttyper, stavekontrol mv for dette sprog bliver installeret. Ydermere "
+"vil '%s'-boksen g鴕e at systemet tvinges til at bruge ISO 10646 (UTF-8). "
+"Bem鎟k dog at dette er en eksperimentel facilitet. Hvis du v鎙ger "
+"forskellige sprog der kr鎣er forskellige kodninger, vil ISO 10646-"
+"underst鴗telse blive installeret under alle omst鎛digheder.\n"
+"\n"
+"For at skifte mellem de forskellige sprog installeret p systemet kan du "
+"starte programmet '/usr/sbin/localedrake' som 'root' for at 鎛dre det sprog "
+"der bruges af hele systemet. K鴕sel af dette program som almindelig bruger "
+"vil kun 鎛dre sprogindstillingerne for denne bruger."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Skift cdrom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s underst鴗tes ikke af denne version af Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "苙dringen er fortaget, men for at v鎟e effektiv skal du logge ud"
+msgid "DHCP client"
+msgstr "DHCP-klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Gem som..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Genskabning fra fil %s mislykkedes: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Indtast din adgangskode for epost nedenfor"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech mus (seriel, gammel C7 type)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "advarsels-konfiguration"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Er du sikker p at du vil ops鎡te udskrift p denne maskine?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Du vil modtage en advarsel hvis belastningen er h鴍ere end denne v鎟di"
+msgid "New devfs device"
+msgstr "Ny devfs-enhed"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "indl鎠 ops鎡ning"
+msgid "ERROR: Cannot spawn %s."
+msgstr "Fejl: Kan ikke starte %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Du vil modtage en advarsel hvis en af de valgte tjenester ikke l鎛gere k鴕er"
+msgid "Boot Style Configuration"
+msgstr "Konfiguration af opstartsudseende"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "service setting"
-msgstr "ops鎡ning af tjenester"
+msgid "Automatic time synchronization"
+msgstr "Automatisk tidssynkronisering"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd-tjeneste"
+msgid "Backup files not found at %s."
+msgstr "Sikkerhedskopier fandtes ikke p %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin-tjeneste"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Tak fordi du valgte Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH-server"
+msgid "Armenian (phonetic)"
+msgstr "Armensk (fonetisk)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba-server"
+msgid "Card model:"
+msgstr "Kortmodel:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix postserver"
+msgid "Thin Client"
+msgstr "Tynd klient"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP-server"
+msgid "Start Server"
+msgstr "Start server"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "L鴖er for dom鎛enavn"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Server"
+msgid "All remote machines"
+msgstr "Alle eksterne maskiner"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til programmet for postkonfigurering.\n"
-"\n"
-"Her vil du kunne ops鎡te p錷indelsessystemet\n"
+msgid "Install themes"
+msgstr "Install閞 temaer"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Konfiguration af postp錷indelse"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
+" opdateringer 2002 MandrakeSoft ved Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Post-p錷indelse"
+msgid "Espanol"
+msgstr "Spansk"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vent venligst, fortolker filen: %s"
+msgid "Preparing installation"
+msgstr "Forbereder installationen"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
-msgstr "Indhold af filen"
+msgid "Edit selected host/network"
+msgstr "Redig閞 valgte v鎟t/netv鎟k"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Calendar"
-msgstr "Kalender"
+msgid "Add User -->"
+msgstr "Tilf鴍 bruger -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "V鎙g fil"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "but not matching"
-msgstr "Men ikke samstemmende"
+msgid "True Type fonts installation"
+msgstr "Installation af True Type-skrifttyper"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "matching"
-msgstr "Samstemmende:"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Auto-opdagelse af printere tilsluttet direkte til det lokale netv鎟k"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Settings"
-msgstr "Indstillinger"
+msgid "LAN configuration"
+msgstr "LAN konfiguration"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Et v鎟kt鴍 til at overv錱e dine logfiler"
+msgid "hard disk model"
+msgstr "Disk-model"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "search"
-msgstr "s鴊"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Forklaringer til Mandrake-v鎟kt鴍er"
+msgid "Get Windows Fonts"
+msgstr "Hent skrifttyper fra Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Syslog"
-msgstr "System"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Messages"
-msgstr "Beskeder"
+msgid "Iranian"
+msgstr "Iransk"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "User"
-msgstr "Bruger"
+msgid "Croatia"
+msgstr "Kroatien"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Hj鎙p/_Om..."
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Indstillinger/Test"
+msgid "Add server"
+msgstr "Tilf鴍 server"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Fil/-"
+msgid "Remote printer name"
+msgstr "Eksternt printernavn"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fil/Gem _som"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft har designet eksklusive v鎟kt鴍er for at lave den mest sikre "
+"Linux-version nogensinde: Draksec, et systemsikkerheds-h錸dteringsv鎟kt鴍, "
+"og en st鎟k brandmur bevirker tilsammen at indbrudsrisikoen reduceres "
+"betragteligt."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "Enhed: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fil/_Gem"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Licensaftale"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fil/_舃n"
+msgid "System Options"
+msgstr "Systemtilvalg"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
+msgid "Please choose the desired security level"
+msgstr "V鎙g det 鴑skede sikkerhedniveau"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Vis kun for den valgte dag"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Denne v鎟t er allerede p listen, og kan ikke blive tilf鴍et igen.\n"
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
+msgid ", USB printer"
+msgstr ", USB printer"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "V鎙g muse-type."
+msgid "Choose the applications that will support the fonts:"
+msgstr "V鎙g de programpakker som vil underst鴗te skrifttyperne:"
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Tilslut %s"
+msgid "Configure X"
+msgstr "Konfigur閞 X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Frakobl %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Tyrkisk (traditionel \"F\" model)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der m錽ke bruger "
-"dit netv鎟k"
+msgid "Congratulations!"
+msgstr "Tillykke!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "modtaget"
+msgid "Use owner id for execution"
+msgstr "Brug ejers id ved udf鴕elsen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "transmitted"
-msgstr "transmitteret"
+msgid "Down"
+msgstr "Ned"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "received: "
-msgstr "modtaget: "
+msgid "Raw printer (No driver)"
+msgstr "R printer (ingen driver)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "sent: "
-msgstr "sendt: "
+msgid "Install rpm"
+msgstr "Install閞 rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokal m錶ing"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
+"programmet '%s <fil>' eller et grafisk printerv鎟kt鴍: 'xpp <fil>' eller "
+"'kprinter <fil>'. De grafiske v鎟kt鴍er lader dig v鎙ge printeren og 鎛dre "
+"indstillingerne p en nem m錮e.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "average"
-msgstr "gennemsnit"
+msgid "Time remaining "
+msgstr "Resterende tid "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Farve-konfiguration"
+msgid "UK keyboard"
+msgstr "Britisk"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Tilslutning mislykkedes.\n"
-"Kontroll閞 konfigurationen i Mandrakes kontrolcentral."
+msgid "Unmount"
+msgstr "Afmont閞"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection complete."
-msgstr "Opkobling fuldf鴕t."
+msgid "Uninstall Fonts"
+msgstr "Afinstall閞 skrifttyper"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Nedkopling fra Internet klar."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Nedkopling fra Internet mislykkedes."
+msgid "German (no dead keys)"
+msgstr "Tysk (ingen d鴇e taster)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Forbindelse til Internettet "
+msgid "Transferring %s..."
+msgstr "Overf鴕er %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Afbryd forbindelse til Internettet "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tusinde farver (15 bit)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Tester din forbindelse, vent venligst..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logger"
+msgid "Reboot"
+msgstr "Genstart"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection Time: "
-msgstr "Tilslutningstid: "
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Modtagelseshastighed:"
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrolcenter"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Sendehastighed:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Du kan angive diverse porte. \n"
+"Gyldige eksempler er: 139/tcp 139/udp.\n"
+"Se /etc/services for information."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Statistics"
-msgstr "Statistik"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Sk鎟m\n"
+"\n"
+" Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
+"sk鎟men tilsluttet din maskine. Hvis dette ikke er den rigtige, kan du i "
+"denne liste v鎙ge den sk鎟m du faktisk har tilsluttet din maskine."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid "\t-Tape \n"
+msgstr "\t-Tape \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Overv錱ning af netv鎟k"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Ingen webl鎠er er installeret p dit system. Install閞 venligst 閚 hvis du "
+"鴑sker at bladre i hj鎙pesystemet."
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "L鎠er data for nye printere..."
+msgid "Remember this password"
+msgstr "Husk denne adgangskode"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Navn eller IP-adresse p v鎟t:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Deling af internetforbindelse er nu sl錯t til"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Denne v鎟t er allerede p listen, og kan ikke blive tilf鴍et igen.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Netv鎟k via SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Skannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Hvis den 鴑skede printer blev fundet, s v鎙g den fra listen og tilf鴍 "
+"dern鎠t brugernavn, adgangskode og/eller arbejdsgruppe om n鴇vendigt."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Du skal indtaste et v鎟tsnavn eller en IP-adresse.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Brug den frie plads p Windows-partitionen"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "V鎙g v鎟ten p hvilken de lokale skannere skal g鴕es tilg鎛gelige: "
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s fundet p %s, skal det konfigureres automatisk?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Deling af lokale skannere"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Argumenter: (arg)\n"
+"\n"
+"Brug adgangskode til at autentificere brugere."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Denne maskine"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 driver: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Fjern valgte v鎟t"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"Denne v鎟t eller dette netv鎟k er allerede p listen, og kan ikke blive "
+"tilf鴍et igen.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Redig閞 valgte v鎟t"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Rapport \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Tilf鴍 v鎟t"
+msgid "Choose the packages you want to install"
+msgstr "V鎙g pakker som skal installeres"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Dette er maskinerne fra hvilke skannerne skal bruges:"
+msgid "Papua New Guinea"
+msgstr "Papua Ny Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Brug skannere"
+msgid "Serbian (cyrillic)"
+msgstr "Serbisk (kyrillisk)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Alle eksterne maskiner"
+msgid "Make kernel message quiet by default"
+msgstr "Skjul kernens beskeder som standard"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Dette er maskinerne p hvilke de lokalt forbundne skannere skal g鴕es "
-"tilg鎛gelige:"
+"豱sker du fremover at bruge printeren \"%s\"\n"
+"som standard?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Brug skannerne p f鴏gende v鎟tsmaskiner:"
+msgid "The DHCP end range"
+msgstr "Stutningen p DHCP-omr錮et"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Brug skannere p eksterne maskiner"
+msgid "Creating bootdisk..."
+msgstr "Opretter opstartsdiskette..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Skannerdeling til v鎟ter: "
+msgid "Wait please, testing your connection..."
+msgstr "Tester din forbindelse, vent venligst..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skannerne p denne maskine er tilg鎛gelige for andre maskiner"
+msgid "Bringing down the network"
+msgstr "Lukker netv鎟ket ned"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Du kan ogs her bestemme om skannere p eksterne maskiner skal g鴕es "
-"tilg鎛gelige p denne maskine"
+msgid "Login ID"
+msgstr "Brugernavn"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"H鎟 kan du v鎙ge om skannere koblede til denne maskine skal g鴕es "
-"tilg鎛gelige for eksterne maskiner og i s fald p hvilke eksterne maskiner."
+"NFS er en popul鎟 protokol til fildeling over TCP/IP\n"
+"netv鎟k. Denne service giver NFS fill錽nings funktionalitet"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Regenererer liste af konfigurerede skannere ..."
+msgid "DHCP Client"
+msgstr "DHCP-Klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "S鴊er efter nye skannere..."
+msgid "dismiss"
+msgstr "forkast"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "S鴊er efter konfigurerede skannere ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Udskriver/Skanner p '%s'"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Skannerdeling"
+msgid "omit raid modules"
+msgstr "undg raid-moduler"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "H錸dpluk skanner"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd er printer-d鎚onen som er n鴇vendig for at lpr virker.\n"
+"Den er basalt en server der h錸dterer udskrifts-opgaver."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "S鴊 efter nye skannere..."
+msgid "Internet Connection Configuration"
+msgstr "Konfiguration af Internetforbindelse"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "comma separated numbers"
+msgstr "kommaseparerede tal"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Der blev ikke fundet nogen skannere som er tilg鎛gelige p dit system.\n"
+"N錼 du har valgt en enhed kan du se enhedsinformationen p felter som vises "
+"i den h鴍re ramme (\"Information\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Flyt valgte regel et niveau op"
#: ../../standalone/scannerdrake:1
#, c-format
@@ -19076,370 +19116,345 @@ msgstr ""
"%s\n"
"er tilg鎛gelig p dit system.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"De f鴏gende skannere\n"
-"\n"
-"%s\n"
-"er tilg鎛gelige p dit system.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Din %s er blevet konfigureret.\n"
-"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik i "
-"programmenuen."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "v鎙g enhed"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "豱sker du virkelig at fjerne printeren \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "V鎙g venligst enheden hvor din %s er isat"
+msgid "I can't find any room for installing"
+msgstr "Kan ikke finde plads til installering"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "S鴊er efter skannere ..."
+msgid "Default printer"
+msgstr "Standard printer"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto-detekt閞 tilg鎛gelige porte"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Du har konfigureret flere m錮er at koble dig mod internet p.\n"
+"Venligst v鎙g den du 鴑sker at bruger.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Bem鎟k: Parallelle porte kan ikke auto-detekteres)"
+msgid "Modify RAID"
+msgstr "苙dr RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Denne %s skal v鎟e konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
+"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. V鎙g et PCI-"
+"kort i n鎠te sk鎟mbillede."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Denne %s er ikke underst鴗tet"
+msgid "Add user"
+msgstr "Tilf鴍 bruger"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s kendes ikke af denne version af Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "RAID-diske %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s underst鴗tes ikke af denne version af Mandrake Linux."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "V鎟t: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Indtast venligst navnet p gr鎛sefladen som er koblet p internettet.\n"
+"\n"
+"Eksempler:\n"
+"\t\tppp+ for modem- eller DSL-opkoblinger, \n"
+"\t\teth0 eller eth1 for kabelopkobling eller ADSL-opkobling via "
+"lokalnetv鎟k, \n"
+"\t\tippp+ for isdn-opkobling.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "V鎙g tastatur"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Fandt model: %s"
+msgid "Format partitions"
+msgstr "Format閞 partitioner"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatisk rettelse af CUPS-konfiguration"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "V鎙g en skannermodel"
+msgid "Running \"%s\" ..."
+msgstr "K鴕er \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s findes ikke skannerdatabasen, skal den konfigureres manuelt?"
+msgid "enable radio support"
+msgstr "aktiv閞 radio-underst鴗telse"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s fundet p %s, skal det konfigureres automatisk?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "S鴊ning efter udstyr udf鴕es"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Nogen enheder blev tilf鴍et:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Nogen enheder i maskinelklassen '%s' blev fjernet:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Skannerdeling til v鎟ter: "
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"MandrakeSofts succes er baseret p princippet om frit programmel. Dit nye "
-"operativsystem er resultatet af et samarbejde i det verdensomsp鎛dende Linux-"
-"samfund"
+msgid "Loopback file name: %s"
+msgstr "Loopback-filnavn: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Velkommen til en verden med 錬en kildetekst"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Angiv hvilken printer som udskriftsopgaverne skal g til."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Tak fordi du valgte Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Overf鴕 ikke printere"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"For at dele din viden og hj鎙pe med at bygge Linux-v鎟kt鴍er kan du v鎟e med "
-"i diskussionsfora som du finder p vores 'Samfunds'-netsider."
+msgid "Delay before booting the default image"
+msgstr "Ventetid f鴕 opstart af forvalgt styresystem"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"豱sker du at vide mere om 舃en Kildetekst-samfundet? V鎟 med i det frie "
-"programmels verden"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Byg fremtiden for Linux!"
+"\n"
+" Copyright 2001-2002 ved MandrakeSoft \n"
+"\tDUPONT Sebastien (oprindelige version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" Dette program er frit programmel; du kan redistribuere det og/eller 鎛dre\n"
+" det i henhold til betingelserne i GNU General Public License, som "
+"publiceret af\n"
+" Free Software Foundation; enten version 2, eller enhver senere udgave\n"
+" af licensen.\n"
+"\n"
+" Dette program er udgivet i h錬 om at det vil v鎟e anvendeligt, men\n"
+" UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
+" SALGBARHED eller EGNETHED TIL ET BESTEMT FORM臠. Se GNU\n"
+" General Public License for flere detaljer.\n"
+"\n"
+" Du skulle have modtaget en kopi af GNU General Public License\n"
+" sammen med dette program; hvis ikke, skriv til Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Tak til:\n"
+" - pfm2afm: \n"
+"\t af Ken Borgendale:\n"
+"\t Konvert閞 en Windows .pfm-fil til en .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t af James Macnicol: \n"
+"\t type1inst genererer filerne fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t af Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Konvert閞 ttf-skrifttypefiler til afm- og pfb-skrifttyper\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 giver dig mulighed for at bruge det allernyeste "
-"programmel til at afspille musik, redigere og organisere dine billeder eller "
-"foto, og se videoer."
+msgid "Please check for multisession CD"
+msgstr "Mark閞 om du bruger en multisessions-cd"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Surf p nettet med Mozilla eller Konqueror, l鎠 din post med Evolution eller "
-"Kmail, lav dine dokumenter med OpenOffice.org."
+msgid "user"
+msgstr "bruger"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft har udvalgt det bedste programmel til dig"
+msgid "Use Hard Disk to backup"
+msgstr "Brug disk til sikkerhedskopiering"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 indeholder Mandrake Kontrolcenter, et st鎟kt v鎟kt鴍 til "
-"at tilpasse din maskine fullst鎛digt til den brug du har behov for. "
-"Konfigur閞 og tilpas elementer som sikkerhedsniveau, tilbeh鴕 (sk鎟m, mus, "
-"tastatur), internetforbindelse og meget mere!"
+msgid "Configure"
+msgstr "Konfigur閞"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrakes multifunktions konfigurationsv鎟kt鴍"
+msgid "Scannerdrake"
+msgstr "Skannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Perfekt tilpasning af din maskine takket v鎟e de 11 Mandrake Linux-"
-"brugergr鎛seflader hvor alt kan tilpasses: KDE 3.1, Gnome 2.2, Window "
-"Maker..."
+"Advarsel, en anden internetforbindelse er blevet fundet, der m錽ke bruger "
+"dit netv鎟k"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Et milj der kan tilpasses"
+msgid "Backup Users"
+msgstr "Lav sikkerhedskopi af brugere"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"At 鎛dre og oprette i forskellige sprog som Perl, Python, C og C++ har "
-"aldrig f鴕 v鎟et s nemt, takket v鎟e GNU gcc 3 og de bedste "
-"udviklingsmilj鴈r baseret p 錬en kildekode."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 er den ultimative udviklingsplatform."
+"Indtast dom鎛enavn, v鎟tsnavn og IP adressen for evt. ekstra navne-servere.\n"
+"Dit v鎟tsnavn skal v鎟e et fuldt kvalificeret v鎟tsnavn inklusive dom鎛e,\n"
+"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
+"s lad navne-server-felterne v鎟e blanke."
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Lav din maskine om til en st鎟k server med bare nogen f klik med musen: "
-"Webserver, post, brandmur, ruter, fil- og print-server, ..."
+msgid "Select Printer Spooler"
+msgstr "V鎙g printerk-behandler"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "G鴕 din maskine til en p錶idelig server"
+msgid "Create new theme"
+msgstr "Opret nyt tema"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Vores komplette udvalg af Linux-l鴖ninger, s vel som specialtilbud p "
-"produkter og andre godbidder, er tilg鎛gelige via nettet i vores e-butik:"
+msgid "Mandrake Tools Explanation"
+msgstr "Forklaringer til Mandrake-v鎟kt鴍er"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Den officielle MandrakeSoft-butik"
+msgid "No image found"
+msgstr "Intet aftryk fundet!"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"For鴊 din maskines ydelse med hj鎙p fra et et udvalg af firmaer som tilbyder "
-"professionelle l鴖ninger kompatible med Mandrake Linux. "
+"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
+"Enten er dit cdrom-drev eller din cdrom fejlbeh鎓tet.\n"
+"Tjek cdrom'en p en f鎟diginstalleret maskine ved brug af \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "F fat i de bedste sager fra Mandrake Linux strategiske partnere"
+msgid "Detected model: %s"
+msgstr "Fandt model: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft har designet eksklusive v鎟kt鴍er for at lave den mest sikre "
-"Linux-version nogensinde: Draksec, et systemsikkerheds-h錸dteringsv鎟kt鴍, "
-"og en st鎟k brandmur bevirker tilsammen at indbrudsrisikoen reduceres "
-"betragteligt."
+"X11 sk鎟mh錸dtering giver dig mulighed for grafisk indlogning p dit system "
+"med X Windowssystemet k鴕ende, og underst鴗ter flere forskellige X-sessioner "
+"p din lokale maskine samtidigt."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optim閞 din sikkerhed ved at bruge Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
+msgstr "hvis sat til ja, s k鴕 de daglige sikkerhedskontroller."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Produktet findes tilg鎛geligt p MandrakeStores netsted."
+msgid "Azerbaijan"
+msgstr "Aserbajdsjan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Fuldf鴕 din sikkerhedsops鎡ning med dette meget brugervenlige programmel som "
-"kombinerer h鴍ydelseskomponenter som brandmur, en server og klient for "
-"virtuelle private netv鎟k (VPN), et indbrudsopdagelsessystem og en "
-"trafikadministrator."
+msgid "No tape in %s!"
+msgstr "Intet b錸d i %s."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "G鴕 dine netv鎟k sikre med multinetv鎟ksbrandmur (MNF)"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
-"Slut dig til MandrakeSofts supporthold og Linux-samfundet p nettet for at "
-"dele din viden og hj鎙pe andre ved at blive en anerkendt Ekspert p det "
-"tekniske supportnetsted:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "dette er den fysiske bus som enheden er tilsuttet (fx PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "Find l鴖ningerne p dine problemer via MandrakeSofts online-support."
+msgid "How is the printer connected?"
+msgstr "Hvordan er printeren tilsluttet?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Bliv en MandrakeEkspert"
+msgid "Security level"
+msgstr "Sikkerhedsniveau"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Alle h鎛delser f鴏ges op af en teknisk kvalificeret MandrakeSoft-ekspert."
+msgid "final resolution"
+msgstr "endelig opl鴖ning"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "En platform p nettet som tilgodes閞 firmaers specifikke supportbehov"
+msgid "Services"
+msgstr "Tjenester"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert for firmaer"
+msgid "4 MB"
+msgstr "4 Mb"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19454,10 +19469,6 @@ msgstr ""
"gnumeric), pdf-visere, o.lign."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spillemaskine"
@@ -19530,10 +19541,6 @@ msgstr ""
"supplerende v鎟kt鴍er."
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk milj"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-arbejdsstation"
@@ -19552,10 +19559,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Udvikling"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
@@ -19624,34 +19627,99 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-v鎟t, SMB-v鎟t, mellemv鎟t (proxy), SSH-v鎟t"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Lyd-station"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"V鎟kt鴍ss鎡 til at l鎠e samt sende post og nyheder, og til at browse p "
+"nettet"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Lyd-afspillere og -redigeringsv鎟kt鴍er"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetforbindelse & -konfiguration"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video-maskine"
+#~ msgid "Configure the connection"
+#~ msgstr "Konfigur閞 forbindelsen"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Video-afspilningsprogrammer"
+#~ msgid "Disconnect"
+#~ msgstr "Afbryd"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Grafisk maskine"
+#~ msgid "Connect"
+#~ msgstr "Tilslut"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafiske programmer"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Du kan genkonfigurere din forbindelse"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"V鎟kt鴍ss鎡 til at l鎠e samt sende post og nyheder, og til at browse p "
-"nettet"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Du kan lave forbindelse til Internettet eller omkonfigurere din "
+#~ "forbindelse."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Du er ikke forbundet til Internettet nu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
+#~ "forbindelse."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Du har forbindelse til Internettet nu."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "Filer sendes via FTP"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Genstart 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Lav initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Skriv %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopi閞 %s til %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Sikkerhedskopi閞 %s til %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "Konvertering af ttf-skrifttyper"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Konvertering af skrifttyper"
+
+#~ msgid "Author:"
+#~ msgstr "Forfatter:"
+
+#~ msgid "Audio station"
+#~ msgstr "Lyd-station"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Lyd-afspillere og -redigeringsv鎟kt鴍er"
+
+#~ msgid "Video station"
+#~ msgstr "Video-maskine"
+
+#~ msgid "Video playing programs"
+#~ msgstr "Video-afspilningsprogrammer"
+
+#~ msgid "Graphic station"
+#~ msgstr "Grafisk maskine"
+
+#~ msgid "Graphics programs"
+#~ msgstr "Grafiske programmer"
#~ msgid "Printer sharing"
#~ msgstr "Printerdeling"
@@ -19700,9 +19768,6 @@ msgstr ""
#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "GDI Laserprinter med Zenographics ZJ-Stream-Format"
-#~ msgid "%s"
-#~ msgstr "%s"
-
#~ msgid "Office"
#~ msgstr "Kontor"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
index 3158ea61a..9a3012f2c 100644
--- a/perl-install/share/po/de.po
+++ b/perl-install/share/po/de.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: MandrakeInstaller\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-02-22 14:28+0100\n"
"Last-Translator: Stefan Siegel <siegel@mandrakesoft.com>\n"
"Language-Team: German <cooker-i18n@linux-mandrake.com>\n"
@@ -14,3700 +14,639 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Das Teilen zwischen Benutzern verwendet die Gruppe 鈥瀎ileshare鈥.\n"
-"Sie k枚nnen UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
-"aufzunehmen."
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr " Abbruch "
-
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Userdrake starten"
+msgid "Scanning partitions to find mount points"
+msgstr "Durchsuchen der Partitionen, um die Einh盲ngpunkte zu finden."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
-"Wenn Sie das erlauben, k枚nnen die Anwender Verzeichnisse in Konqueror oder "
-"Nautilus im Kontextmen眉 der entsprechenden Verzeichnisses freigeben.\n"
-"\n"
-"Mit 鈥濨enutzerdefiniert鈥 k枚nnen Sie eine Einstellung pro Kennzeichen "
-"vornehmen.\n"
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Das zwingend ben枚tigte Paket 鈥%s鈥 fehlt."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+msgid "\t\tErase=%s"
msgstr ""
-"Sie k枚nnen die Dateien mittels Samba oder NFS anbieten. Welche Variante "
-"wollen Sie?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Custom"
-msgstr "Benutzerdefiniert"
+msgid "network printer port"
+msgstr "Port des Netzwerkdruckers"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Allow all users"
-msgstr "Allen Benutzern erlauben"
+msgid "Please insert floppy disk:"
+msgstr "Bitte legen Sie eine Diskette ein:"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Kein Teilen"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "More"
-msgstr "Mehr"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hier die komplette Liste aller Staaten"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose your country."
-msgstr "Bitte w盲hlen Sie Ihren Staat."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "R茅union"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Country"
-msgstr "Staat"
-
-#: ../../any.pm:1
-#, c-format
-msgid "All languages"
-msgstr "Alle Sprachen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Verwende standardm盲脽ig Unicode"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Sie k枚nnen andere Sprachen ausw盲hlen, die nach der Installation zur "
-"Verf眉gung stehen."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Bitte w盲hlen Sie die zu verwendende Sprache."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "W盲hlen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "W盲hlen Sie den Standard-Nutzer:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "M枚chten Sie diese M枚glichkeit nutzen?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Ich kann Ihren Computer so einrichten, dass ein Benutzer automatisch "
-"angemeldet wird."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Symbol"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Passwort"
+"Die gesicherte Partitionstabelle hat nicht dieselbe Gr枚脽e\n"
+"Soll trotzdem fortgefahren werden?"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "User name"
+msgid "Which username"
msgstr "Benutzerkennzeichen"
#: ../../any.pm:1
#, c-format
-msgid "Real name"
-msgstr "Benutzername"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Done"
-msgstr "Fertig"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzerkennzeichen einrichten\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Benutzer hinzuf眉gen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "Dieses Benutzerkennzeichen existiert bereits"
-
-#: ../../any.pm:1
-#, c-format
-msgid "The user name is too long"
-msgstr "Dieses Benutzerkennzeichen ist zu lang"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"鈥-鈥 und 鈥瀇鈥 bestehen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Die Passw枚rter stimmen nicht 眉berein"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugef眉gt)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr "Zugriff auf Compiler"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr "Zugriff auf Netzwerk-Werkzeuge"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr "Zugriff auf Verwaltungsdateien"
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr "鈥瀞u鈥 erlauben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to rpm tools"
-msgstr "Zugriff auf RPM-Werkzeuge"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
-msgstr "Zugriff auf X-Programme"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen Eintr盲ge.\n"
-"Sie k枚nnen weitere hinzuf眉gen oder existierende 盲ndern."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Anderes Betriebssystem (Windows ...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Anderes Betriebssystem (MacOS ...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Anderes Betriebssystem (SunOS ...)"
-
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm:1
-#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Welche Art Eintrag wollen Sie hinzuf眉gen?"
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Sie m眉ssen die Verzeichnisbaumwurzel festlegen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Sie M眉ssen ein Kern-Abbild angeben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Leere Eintr盲ge sind nicht erlaubt"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Gr枚脽e der Init-RamDisk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "脺bergeben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Identifikator"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "Unsicher"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "Tabelle"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Schreiben/Lesen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "Video Modus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "Kern"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Standard BS"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Open Firmware Start erlauben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "BS-Start von CD erlauben"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "BS-Startverz枚gerung f眉r den Kern"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Verz枚gerung"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "Boot Ger盲t"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Init Nachricht"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "Zu verwendender Betriebssystemstarter"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Betriebssystemstarters"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option 鈥濭ebrauch der Kommandozeilen-Parameter einschr盲nken鈥 ist ohne \n"
-"Angabe eines Passworts wirkungslos"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM Gr枚脽e in MB an"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Mehrere Profile einschalten"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Geben Sie, falls n枚tig, die genaue RAM Gr枚脽e an (%d MB gefunden)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Die Partition /tmp bei jedem Systemstart s盲ubern"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Startdiskette erstellen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "Einschr盲nken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschr盲nken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
-msgstr "No ACPI erzwingen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI aktivieren"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "Kompakt"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Installation des Betriebssystemstarters"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "Erster Sektor der Boot-Partition"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub Installation"
-
-#: ../../any.pm:1
-#, c-format
-msgid "SILO Installation"
-msgstr "SILO Installation"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Skip"
-msgstr "脺berspringen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "On Floppy"
-msgstr "Auf Diskette"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Erster Sektor der Verzeichnisbaumwurzel"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
-"zu starten.\n"
-"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
-"Record haben (etwa System Commander).\n"
-"\n"
-"Von welchem Verzeichnis wollen Sie starten?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Startdiskette wird erstellt..."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-"Legen Sie eine Diskette, die keine relevanten Daten mehr enth盲lt in 鈥%s鈥 ein."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"W盲hlen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "zweite Disketten-Laufwerk"
+msgid "Restore partition table"
+msgstr "Partitionstabelle wiederherstellen"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "erste Disketten-Laufwerk"
+msgid "On CUPS server \"%s\""
+msgstr "Auf CUPS-Server 鈥%s鈥"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ich kann kein Laufwerk finden"
+msgid "Post-install configuration"
+msgstr "Einstellungen f眉r nach der Installation"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mit einer individuellen Startdiskette k枚nnen Sie Ihr LINUX-System starten, \n"
-"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"n眉tzlich, wenn \n"
-"Sie weder LILO noch Grub auf Ihrem System installieren m枚chten, wenn ein \n"
-"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
-"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
-"korrekt \n"
-"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
-"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
-"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"M枚chten Sie jetzt eine Startdiskette f眉r Ihr System erstellen?\n"
-"%s"
+msgid "Use ``%s'' instead"
+msgstr "Verwenden Sie stattdessen 鈥%s鈥"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WARNUNG! Sie verwenden XFS f眉r Ihre Verzeichnisbaumwurzel.\n"
-"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
-"schl盲 sicher fehl, da XFS einen sehr gro脽en Treiber ben枚tigt)."
+msgid "Type"
+msgstr "Typ"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Mit einer individuellen Startdiskette k枚nnen Sie Ihr LINUX-System starten, \n"
-"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"n眉tzlich, \n"
-"wenn Sie SILO nicht auf Ihrem System installieren m枚chten, wenn ein \n"
-"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
-"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
-"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
-"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
-"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
-"kann.\n"
"\n"
-"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
-"ohne relevante Daten in ihr erstes Laufwerk und dr眉cken Sie 鈥濷K鈥."
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Sie k枚nnen den Betriebssystemstarter\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in 鈥/boot鈥"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "In %d Sekunden wird das gew聞hlte BS automatisch gestartet."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Zum Starten des BS dr聛cken Sie <Return>. Mit <e> k聰nnen Sie das"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w聞hlen."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO mit Textmen眉"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem Men眉"
+"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
+"Treibern eingerichtet wurden, k枚nnen nicht 眉bertragen werden."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"The following printer\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Willkommen zum Betriebssystem-Starter %s\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
+"Die folgenden Drucker\n"
"\n"
+"%s%s\n"
+"sind direkt an Ihr System angeschlossen"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr "Das Programm 鈥瀋onsolehelper鈥 wurde nicht gefunden."
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "Ich kann 鈥瀔desu鈥 nicht finden!"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Die Bildschirm-Schnappsch眉sse liegen nach der Installation unter 鈥%s鈥"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-"Vor der Partitionierung kann ich keine Bildschirm-Schnappsch眉sse machen."
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Austria"
-msgstr "脰stereich"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Sweden"
-msgstr "Schweden"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Norway"
-msgstr "Norwegen"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Greece"
-msgstr "Griechenland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Deutschland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Czech Republic"
-msgstr "Tschechische Republik"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Frankreich"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fehler beim 脰ffnen von %s zum Schreiben: %s"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Nothing to do"
-msgstr "Nichts zu tun."
-
-# ../../diskdrak1
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Sie k枚nnen kein verschl眉sseltes Medium f眉r den Einh盲ngpunkt %s verwenden."
-
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Sie ben枚tigen ein echtes GNU/Linux Dateisystem (Ext2/Ext3, ReiserFS, XFS "
-"oder JFS) f眉r diesen Einh盲ngpunkt.\n"
+msgid "Central African Republic"
+msgstr "Zentralafrikanische Republik"
-#: ../../fsedit.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
+msgid "Gateway device"
+msgstr "Gateway Ger盲t"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
+msgid "Net Method:"
msgstr ""
-"Sie k枚nnen kein logisches LVM Medium f眉r den Einh盲ngpunkt %s verwenden."
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
-"ausgew盲hlt. \n"
-"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
-"鈥/boot鈥-Partition arbeiten. Stellen Sie sicher, dass Sie eine solche \n"
-"Partition erstellen."
+msgid "Ethernetcard"
+msgstr "Netzwerkkarten"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem Einh盲ngpunkt %s\n"
+msgid "Parameters"
+msgstr "Parameter"
-#: ../../fsedit.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"Einh盲ngpunkte sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
+msgid "Auto-detect"
+msgstr "Autoerkennung"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Einh盲ngpunkte m眉ssen mit einem / beginnen."
+msgid "Interface:"
+msgstr "Schnittstelle:"
-#: ../../fsedit.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie k枚nnen ReiserFS nicht f眉r Partitionen verwenden, die kleiner als 32MB "
-"sind!"
+msgid "Select installation class"
+msgstr "Installationsart ausw盲hlen"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
+msgid "on CDROM"
msgstr ""
-"Sie k枚nnen JFS nicht f眉r Partitionen verwenden, die kleiner als 16MB sind!"
-#: ../../fsedit.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ich kann die Partitionstabelle von 鈥%s鈥 nicht verstehen. Sie scheint \n"
-"fehlerhaft zu sein :-(\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen l枚sche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ k枚nnen \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu ver盲ndern.\n"
-"(Folgender Fehler trat auf: 鈥%s鈥).\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen l枚sche?\n"
-
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "Fehler"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "Server"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "mit 鈥/usr鈥"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "Einfach"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Swap Partition 鈥%s鈥 aktivieren"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim Aush盲ngen von %s: %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Das Einh盲ngen der Partition %s in das Verzeichnis %s schlug fehl."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Partition 鈥%s鈥 einh盲ngen"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Checking %s"
-msgstr "Kontrolliere von %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition 鈥%s鈥"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und formatieren der Datei %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug Fehl"
+"Das System scheint nicht mit dem Internet verbunden zu sein.\n"
+"Versuchen Sie noch einmal Ihre Verbindung konfigurieren."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter ->鈥, wenn Sie alle Partitionen und\n"
-"die darauf befindlichen Daten l枚schen wollen. Bedenken Sie, dass Sie nach\n"
-"bet盲tigen der Schaltfl盲che auch an die m枚glicherweise noch vorhandenen\n"
-"Windows-Daten nicht mehr gelangen werden!\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
"\n"
-"W盲hlen Sie 鈥<- Zur眉ck鈥, um die Aktion ohne Datenverlust abzubrechen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Bitte w盲hlen Sie die Festplatte, die Sie l枚schen wollen, um Ihr neues\n"
-"Mandrake Linux zu installieren. Bedenken Sie dabei, dass alle Daten auf\n"
-"dieser Platte nach diesem Schritt unwiederbringlich verloren sind!"
+"Verbinden Sie Ihren Drucker mit einem Linux-Server und lassen Sie Ihre(n) "
+"Windows-Rechner als Client auf ihn zugreifen.\n"
+" \n"
+"M枚chten Sie Ihren Drucker wirklich so einrichten, wie Sie es jetzt tun?"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-"Nun bekommen Sie eine Zusammenfassung verschiedener Informationen Ihres\n"
-"Systems. Je nach vorhandener Hardware sehen Sie hier (oder eben nicht) die\n"
-"folgende Eintr盲ge. Jeder Eintrag besteht aus einem konfigurierbaren Ger盲t\n"
-"gefolgt vom dessen aktuellen Zustand. Durch bet盲tigen der Schaltfl盲che\n"
-"鈥濳onfigurieren鈥 k枚nnen Sie diesen 盲ndern.\n"
-"\n"
-" * 鈥濼astatur鈥: Kontrollieren Sie die aktuelle Tastaturvorgabe und w盲hlen\n"
-"Sie die Schaltfl盲che, falls Sie die Vorgabe 盲ndern wollen.\n"
-"\n"
-" * 鈥濻taat鈥: 鈥濻taat鈥: Kontrollieren Sie, ob die Auswahl des Staates, in dem\n"
-"Sie sich befinden korrekt ist. Falls nicht, bet盲tigen Sie bitte die\n"
-"Schaltfl盲che 鈥濳onfigurieren鈥 und w盲hlen Sie den richtigen. Ist Ihr Staat\n"
-"nicht in der Liste, die Sie gezeigt bekommen, k枚nnen Sie 眉ber die\n"
-"Schaltfl盲che 鈥濵ehr鈥 eine vollst盲ndigere Liste erzwingen.\n"
-"\n"
-" * 鈥瀂eitzone鈥: 鈥濪rakX鈥 versucht die Zeitzone anhand des gew盲hlten Staates\n"
-"zu setzen. Sollte diese Auswahl nicht korrekt sein (manche Staaten etwa\n"
-"眉berspannen mehrere Zeitzonen) k枚nnen Sie durch bet盲tige der Schaltfl盲che\n"
-"鈥濳onfigurieren鈥 Ihre lokale Zeitzone setzen.\n"
-"\n"
-" * 鈥濵aus鈥: Kontrollieren Sie die konfigurierte Maus und bet盲tigen Sie,\n"
-"falls notwendig, die Schaltfl盲che.\n"
-"\n"
-" * 鈥濪rucker鈥: Durch Anwahl der Schaltfl盲che 鈥濳onfigurieren鈥 startet den\n"
-"Druckerassistenten. Weitere Informationen zu diesem Assistenten erhalten\n"
-"Sie im Drucker-Kapitel des 鈥濻tarter Handbuch鈥. Das dort vorgestellte\n"
-"Programm entspricht dem w盲hrend der Installation angebotenen.\n"
-"\n"
-" * 鈥濻oundkarte鈥: Falls eine Soundkarte in Ihrem Rechner gefunden wurde,\n"
-"wird sie hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht\n"
-"korrekt sein, bet盲tigen Sie einfach die Schaltfl盲che, um sie zu\n"
-"korrigieren.\n"
-"\n"
-" * 鈥濭rafikumgebung鈥: DrakX richtet Ihre Grafikumgebung normalerweise in der\n"
-"Aufl枚sung 鈥800脳600鈥 bzw. 鈥1024脳768鈥 ein. Sollte Ihnen das nicht zusagen,\n"
-"k枚nnen Sie es durch bet盲tigen der Schaltfl盲che 鈥濳onfigurieren鈥 盲ndern.\n"
-"\n"
-" * 鈥濼V-Karte鈥: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird\n"
-"sie hier angezeigt. Falls Sie eine TV-Karte besitzen, die hier nicht\n"
-"richtig erkannt wurde, k枚nnen Sie versuchen, diese manuell einzurichten.\n"
-"Bet盲tigen Sie einfach die Schaltfl盲che 鈥濳onfigurieren鈥.\n"
-"\n"
-" * 鈥濱SDN Karte鈥: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde,\n"
-"wird sie hier angezeigt. Durch Anwahl der Schaltfl盲che\n"
-"鈥濳onfigurieren鈥渒枚nnen Sie die Parameter 盲ndern.\n"
-"\n"
-" * 鈥濶etzwerk鈥: Falls Sie Ihren Internetzugang oder Ihr lokales Netzwerk nun\n"
-"einrichten wollen, k枚nnen Sie das hier tun.\n"
-"\n"
-" * 鈥濻icherheitsebene鈥: Dieser Eintrag erm枚glicht es Ihnen, die\n"
-"Sicherheitsebene Ihres Systems zu 盲ndern, die Sie in einem fr眉heren\n"
-"Installationsschritt () gew盲hlt haben.\n"
-"\n"
-" * 鈥濬irewall鈥: Falls Sie Ihren Rechner mit dem Internet verbinden wollen,\n"
-"ist es sinnvoll sich vor ungebetenen Eindringlingen durch einrichten einer\n"
-"Firewall zu sch眉tzen. Lesen Sie das entsprechende Kapitel im 鈥濻tarter\n"
-"Handbuch鈥, wenn Sie weitere Informationen ben枚tigen.\n"
-"\n"
-" * 鈥濨etriebssystemstarter鈥: Falls Sie die Konfiguration Ihres\n"
-"Betriebssystemstarters 盲ndern wollen, w盲hlen Sie diese Schaltfl盲che. Es sei\n"
-"angemerkt, dass dieser Punkt sich an fortgeschrittenere Nutzer richtet.\n"
-"\n"
-" * 鈥濪ienste鈥: Sie k枚nnen hier die Dienste w盲hlen, die ab dem Start von\n"
-"Mandrake Linux zur Verf眉gung gestellt werden sollen. Wollen Sie den Rechner\n"
-"als Server verwenden, sollten Sie unbedingt einen Blick auf diese Liste\n"
-"werfen."
+msgid "Belarus"
+msgstr "Wei脽russland"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"鈥濻oundkarte鈥: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird\n"
-"sie hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt\n"
-"sein, bet盲tigen Sie einfach die Schaltfl盲che, um sie zu korrigieren."
+msgid "Error writing to file %s"
+msgstr "Fehler beim Schreiben in Datei %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Yaboot ist ein BS-Starter f眉r NewWorld MacIntosh Rechner. Er kann sowohl\n"
-"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
-"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
-"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
-"k枚nnen Sie diese hier manuell hinzuf眉gen. Stellen Sie jedoch sicher, die\n"
-"richtigen Parameter zu verwenden.\n"
-"\n"
-"Die Hauptparameter von yaboot sind:\n"
-"\n"
-" * 鈥濱nit Nachricht鈥: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
-"wird.\n"
-"\n"
-" * 鈥濨oot Ger盲t鈥: Hiermit wird angegeben, wohin die Informationen zum\n"
-"Starten Ihres GNU/Linux Systems geschrieben werden sollen.\n"
-"\n"
-" * 鈥濷pen Firmware Verz枚gerung鈥: Im Gegensatz zu LILO, stehen mit yaboot\n"
-"zwei Verz枚gerungen zur Verf眉gung. Die erste Verz枚gerung wird in Sekunden\n"
-"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
-"\n"
-" * 鈥濨S-Startverz枚gerung f眉r den Kern鈥: Diese Verz枚gerung entspricht der\n"
-"LILO Start-Verz枚gerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
-"Verz枚gerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
-"wird.\n"
-"\n"
-" * 鈥濨S-Start von CD erlauben鈥: Markieren dieses Punkts erlaubt es Ihnen an\n"
-"der ersten Eingabeaufforderung [C] f眉r den Start von CD zu w盲hlen.\n"
-"\n"
-" * 鈥濷pen Firmware Start erlauben鈥: Markieren dieses Punkts erlaubt es Ihnen\n"
-"an der ersten Eingabeaufforderung [N] f眉r den Open Firmware Start zu\n"
-"w盲hlen.\n"
-"\n"
-" * 鈥濻tandard BS鈥: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
-"Ablauf der Open Firmware Verz枚gerung automatisch gestartet werden soll."
+"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
+"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
+"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
+"bevor die Batterien leer sind."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Sie k枚nnen weitere yaboot Eintr盲ge angeben, etwa f眉r andere\n"
-"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
-"\n"
-"F眉r ein anderes BS k枚nnen Sie nur einen Namen und die Start-Partition\n"
-"angeben.\n"
-"\n"
-"F眉r Linux gibt es einige Parameter:\n"
-"\n"
-" * 鈥濱dentifikator鈥: Es handelt sich um den Namen, den Sie an der yaboot\n"
-"Eingabeaufforderung angeben m眉ssen, um diese Alternative zu w盲hlen.\n"
-"\n"
-" * 鈥濳ern鈥: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
-"handelt es sich um 鈥瀡mlinuz鈥 oder eine Variante von 鈥瀡mlinuz鈥 mit einer\n"
-"Versionsnummer.\n"
-"\n"
-" * 鈥濾erzeichnisbaumwurzel鈥: Die Verzeichnisbaumwurzel 鈥/鈥 Ihrer Linux\n"
-"Installation.\n"
-"\n"
-" * 鈥灻渂ergeben鈥: Auf Apple Hardware, wird die 脺bergabem枚glichkeit weiterer\n"
-"Kernparameter h盲ufig verwendet, um die Grafikausgabe richtig zu\n"
-"konfigurieren oder die Tastaturemulation der Mauskn枚pfe einzuschalten, da\n"
-"klassische Apple-M盲use von Hause aus mit 2 fehlenden Maustasten\n"
-"ausgeliefert werden. Hier einige Beispiele:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * 鈥濱nit-RamDisk鈥: Dieser Parameter kann entweder verwendet werden, um beim\n"
-"Betriebssystemstart bereits zus盲tzliche Kern-Module zur Verf眉gung zu haben,\n"
-"ohne dass das Start-Ger盲t zur Verf眉gung steht oder um ein RamDisk Abbild\n"
-"f眉r den BS-Start in Notf盲llen zur Verf眉gung zu haben.\n"
-"\n"
-" * 鈥濭r枚脽e der Init-RamDisk鈥: Standardm盲脽ig ist eine RamDisk 4096 Bytes\n"
-"gro脽. Sollten Sie eine gr枚脽ere RamDisk ben枚tigen, k枚nnen Sie das mit diesem\n"
-"Parameter einstellen.\n"
-"\n"
-" * 鈥濻chreiben/Lesen鈥: Normalerweise wird die Verzeichnisbaumwurzel zuerst\n"
-"im Nur-Lese-Modus eingeh盲ngt, um eine Dateisystem-Verifikation durchf眉hren\n"
-"zu k枚nnen, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
-"k枚nnen Sie hier abstellen.\n"
-"\n"
-" * 鈥濶oVideo鈥: Sollte sich die Apple Grafik-Hardware als extrem\n"
-"problematisch erweisen, k枚nnen Sie diesen Parameter verwenden um im sog.\n"
-"鈥瀗ovideo鈥-Modus, also im FrameBuffer-Modus zu starten.\n"
-"\n"
-" * 鈥濻tandard鈥: W盲hlt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
-"Dr眉cken von Enter an der yaboot Eingabeaufforderung gestartet bekommen.\n"
-"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung dr眉cken, erhalten Sie\n"
-"eine Liste der verf眉gbaren Alternativen. Der Standardeintrag wird mit einem\n"
-"Stern 鈥*鈥 markiert."
+msgid "Use tape to backup"
+msgstr "Auf Bandlaufwerk sichern"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"鈥濪rakX鈥 versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht 鈥濪rakX鈥 auch nach PCI-SCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls 鈥濪rakX鈥 nicht wei脽, welcher Treiber funktioniert, werden Sie gebeten,\n"
-"鈥濪rakX鈥 zu helfen.\n"
-"\n"
-"Falls 鈥濪rakX鈥 nicht in der Lage ist, die Parameter selbst zu finden, die\n"
-"dem Modul zu 眉bergeben sind, m眉ssen Sie diese angeben.\n"
-"\n"
-"Sie k枚nnen die ben枚tigten Informationen etwa unter Windows (sofern das auf\n"
-"Ihren Rechner installiert ist) finden, aus den Handb眉chern, die sie mit dem\n"
-"Adapter erhalten haben oder von den Web-Seiten des Hardware-Anbieters\n"
-"(sofern Sie einen WWW-Zugang haben)."
+msgid "The following packages are going to be installed"
+msgstr "Die folgenden Pakete werden installiert werden"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Hier k枚nnen Sie das Drucksystem f眉r Ihren Rechner w盲hlen. Andere\n"
-"Betriebssysteme bieten Ihnen nur eines, bei Mandrake Linux k枚nnen Sie\n"
-"zwischen zwei verschiedenen w盲hlen.\n"
-"\n"
-" * 鈥瀙dq鈥 - Es steht f眉r 鈥瀙rint, don't queue鈥 (engl. f眉r 鈥濪rucken ohne\n"
-"Warteschlange鈥). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"h盲ngt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
-"dabei aber extrem langsam. W盲hlen Sie 鈥瀙dq鈥, wenn Sie ein GNU/Linux Neuling\n"
-"sind.\n"
-"\n"
-" * 鈥濩UPS鈥 - Mit dem 鈥濩ommon Unix Printing System鈥 (engl. f眉r 鈥濧llgemeines\n"
-"Unix-Drucksystem鈥) k枚nnen Sie ebenso gut um auf Ihrem direkt\n"
-"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
-"auf der anderen Seite der Welt h盲ngt. Es ist einfach zu bedienen und kann\n"
-"sowohl als Server als auch als Klient f眉r das alte 鈥瀕pd鈥-Drucksystem\n"
-"verwendet werden - Es ist somit r眉ckw盲rtskompatibel. Es ist sehr m盲chtig,\n"
-"in seiner Grundeinstellung verh盲lt es sich jedoch genau wie 鈥瀙dq鈥. Wenn Sie\n"
-"einen 鈥瀕pd鈥 Server ben枚tigen, m眉ssen Sie einfach nur den 鈥瀋ups-lpd鈥 D盲mon\n"
-"starten. CUPS bietet grafische Konfigurations- und Druckmen眉s.\n"
-"\n"
-"Sie k枚nnen diese Wahl sp盲ter immer wieder 盲ndern, indem Sie PrinterDrake im\n"
-"Mandrake-Kontrollzentrum starten und dort die Schaltfl盲che 鈥濫xpertenmodus鈥淺n"
-"bet盲tigen."
+msgid "CUPS configuration"
+msgstr "CUPS Konfiguration"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO und grub sind Betriebssystemstarter f眉r GNU/Linux. Diese\n"
-"Installationsphase l盲uft in den meisten F盲llen v枚llig automatisch ab. DrakX\n"
-"analysiert den Bootsektor und ergreift dann die passenden Ma脽nahmen:\n"
-"\n"
-" * Findet DrakX einen Windows-Bootsektor, ersetzt es ihn durch einen grub-\n"
-"oder LILO-Bootsektor. Sie erhalten dadurch die M枚glichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und GNU/Linux auszuw盲hlen;\n"
-"\n"
-" * Findet DrakX einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Falls DrakX nicht wei脽, wo der Betriebssystemstarter installiert werden\n"
-"soll, wird es Sie um Ihre Meinung bitten.\n"
-"\n"
-"鈥濨oot Ger盲t鈥: Normalerweise werden Sie die Voreinstellung nicht 盲ndern\n"
-"(鈥濫rster Sektor der Platte (MBR)鈥), Sie k枚nnen Ihn jedoch auch auf der\n"
-"zweiten Festplatte (鈥/dev/hdb鈥), oder etwa auf einer Diskette (鈥濧uf\n"
-"Diskette鈥)."
+msgid "Hong Kong"
+msgstr "Hong Kong"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Nachdem Sie die allgemeinen BS-Starter Parameter eingestellt haben,\n"
-"bekommen Sie die Liste m枚glicher Betriebssystemalternativen f眉r das\n"
-"Startmen眉 gezeigt.\n"
-"\n"
-"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
-"so wird dieses - sofern es erkannt wird - automatisch zu dem Startmen眉\n"
-"hinzugef眉gt. Hier k枚nnen Sie noch einige Feineinstellungen f眉r die\n"
-"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
-"bet盲tigen Sie die Schaltfl盲che 鈥灻刵dern鈥, um ihn anzupassen oder zu l枚schen;\n"
-"鈥濰inzuf眉gen鈥 erzeugt einen neuen Eintrag und 鈥濬ertig鈥 bringt Sie zum\n"
-"n盲chsten Installationsschritt.\n"
-"\n"
-"M枚glicherweise wollen Sie auch nicht, dass andere Anwender Zugriff auf die\n"
-"眉brigen installierten Betriebssysteme bekommen. In diesem Fall k枚nnen Sie\n"
-"die jeweiligen Eintr盲ge entfernen, Sie m眉ssen jedoch selbst f眉r\n"
-"Startdisketten sorgen, um diese Systeme erreichen zu k枚nnen!"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu k枚nnen."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"DrakX bietet Ihnen einen Dialog mit verschiedenen Auswahlm枚glichkeiten.\n"
-"\n"
-" * 鈥瀂u verwendender Betriebssystemstarter鈥: Hier erhalten Sie drei\n"
-"Alternativen:\n"
-"\n"
-" * 鈥濭RUB鈥: Falls Sie grub (Textmen眉) bevorzugen.\n"
-"\n"
-" * 鈥濴ILO mit Textmen眉鈥: Falls Sie LILO mit Textmen眉 als Ihren Favoriten\n"
-"ansehen.\n"
-"\n"
-" * 鈥濴ILO mit grafischem Men眉鈥: Falls Sie LILO mit seiner grafischen\n"
-"Oberfl盲che bevorzugen.\n"
-"\n"
-" * 鈥濨oot Ger盲t鈥: Normalerweise m眉ssen Sie hier nichts 盲ndern (鈥/dev/hda鈥),\n"
-"Sie k枚nnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
-"(鈥/dev/hdb鈥) oder sogar auf einer Diskette (鈥/dev/fd0鈥).\n"
-"\n"
-" * 鈥濿artezeit vorm Starten des Standard Betriebssystems鈥: Wenn Sie Ihren\n"
-"Rechner neu starten erhalten Sie im Men眉 der zur Verf眉gung stehenden BSe\n"
-"eine gewisse Zeit um auszuw盲hlen, was Sie starten m枚chten. Sollten Sie\n"
-"w盲hrend dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
-"gestartet.\n"
-"\n"
-"!! Machen Sie sich klar, dass Sie sich selbst darum k眉mmern m眉ssen,\n"
-"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
-"Betriebssystemstarter installieren (durch Auswahl von 鈥灻渂erspringen鈥).\n"
-"Stellen Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier\n"
-"Einstellungen ver盲ndern ... !!\n"
-"\n"
-"Durch w盲hlen der Schaltfl盲che 鈥濬ortgeschritten鈥 erhalten Sie etliche\n"
-"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben."
+msgid "Moving"
+msgstr "wechsele"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Sie k枚nnen nun das 禄root芦 Passwort f眉r Ihr Mandrake Linux System eingeben.\n"
-"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass Sie\n"
-"es korrekt eingegeben haben.\n"
-"\n"
-"禄root芦 ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
-"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
-"盲ndern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: 禄root芦 darf\n"
-"alles! W盲hlen Sie deshalb das Passwort sehr sorgf盲ltig aus! Unberechtigter\n"
-"Zugang zu diesem Kennzeichen ist extrem gef盲hrlich f眉r die Integrit盲t Ihres\n"
-"Systems und der darauf enthaltenen Daten. Daher m眉ssen Sie auch ein\n"
-"Passwort ausw盲hlen, was nicht leicht zu erraten ist; 鈥濪rakX鈥 teilt Ihnen\n"
-"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch m枚glich ist,\n"
-"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
-"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
-"Betriebssysteme vor Fehlern sicher sind. 禄root芦 hat keine Beschr盲nkungen.\n"
-"Er k枚nnte beispielsweise unbeabsichtigt erweise alle Daten auf allen\n"
-"Partitionen l枚schen, weil er unvorsichtigerweise auf die Partitionen selber\n"
-"zugegriffen hat!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens 8 Zeichen lang. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne gro脽en Aufwand merken k枚nnen.\n"
-"\n"
-"Sie m眉ssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
-"Versuch k枚nnte sonst zu einem Problem werden, da Sie anschlie脽end das\n"
-"鈥瀎alsche鈥 Passwort bei der Verbindung mit dem System eingeben m眉ssten.\n"
-"\n"
-"Wenn Sie wollen, dass der Zugang zu diesem Rechner 眉ber einen\n"
-"Authentifizierungsserver verwaltet wird, bet盲tigen Sie die Schaltfl盲che\n"
-"鈥濬ortgeschritten鈥.\n"
-"\n"
-"Falls in Ihrem Netzwerk LDAP, NIS oder PDC zur Authentifizierung verwendet\n"
-"wird, w盲hlen Sie bitte den entsprechenden Men眉punkt. Falls Sie nicht\n"
-"wissen, welches Protokoll Sie verwenden, fragen Sie Ihren\n"
-"Netzwerkadministrator.\n"
+"Drakbackup activities via %s:\n"
"\n"
-"Wenn Sie Probleme haben, sich Passw枚rter zu merken, k枚nnen Sie die Option\n"
-"鈥濳ein Passwort鈥 w盲hlen. Dennoch m眉ssen wir Ihnen von dieser M枚glichkeit\n"
-"abraten. Besonders wenn Sie mit Ihrem Rechner st盲ndig oder auch nur\n"
-"zeitweise mit dem Internet verbunden sind."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
-"W盲hlen Sie bitte den richtigen Anschluss. So ist etwa der unter Windows\n"
-"鈥濩OM1鈥 genannte Anschluss in GNU/Linux unter 鈥瀟tyS0鈥 erreichbar."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"鈥濪rakX鈥 versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
-"Sollte das nicht m枚glich sein, so behandelt es Ihre Maus als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt 眉blicherweise\n"
-"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
-"handelt.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: W盲hlen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Sollten Sie einen anderen Maustyp gew盲hlt haben, als DrakX Ihnen vorschlug,\n"
-"k枚nnen Sie die Funktionst眉chtigkeit Ihrer Maus im angezeigten Dialog\n"
-"眉berpr眉fen. Verwenden Sie auch die Kn枚pfe und gegebenenfalls das Mausrad,\n"
-"um sicherzustellen, dass die festgelegten Einstellungen funktionieren.\n"
-"Falls nicht, dr眉cken Sie die [Leertaste] oder die Eingabetaste, um zur眉ck\n"
-"zum Auswahlmen眉 zu gelangen und suchen Sie einen anderen Treiber aus.\n"
-"\n"
-"Es kommt vor, dass M盲use mit R盲dern nicht korrekt erkannt werden. W盲hlen\n"
-"Sie in diesem Fall die richtige Maus aus der vorgegebenen Liste. Stellen\n"
-"Sie sicher, dass Sie auch den Anschluss richtig angegeben haben. Nach\n"
-"bet盲tigen der Schaltfl盲che 鈥濿eiter->鈥, wird Ihnen ein Bild der gew盲hlten\n"
-"Maus gezeigt. Bewegen Sie R盲der und Tasten, um sicherzustellen, dass die\n"
-"Maus richtig erkannt wurde."
+msgid "("
+msgstr "("
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
+"Welcome to The Network Configuration Wizard.\n"
"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"W盲hlen Sie Ihre bevorzugte Sprache f眉r den Installationsvorgang und\n"
-"Systemlaufzeit. W盲hlen Sie zuerst die Region, in der Sie sich befinden,\n"
-"anschlie脽end die Sprache, die Sie sprechen.\n"
-"\n"
-"Durch Bet盲tigen der Schaltfl盲che 鈥濬ortgeschritten鈥 erhalten Sie die\n"
-"M枚glichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
-"sp盲ter verwenden zu k枚nnen. Wollen Sie etwa Spaniern muttersprachlichen\n"
-"Zugang zu Ihrem System erlauben, w盲hlen Sie Deutsch als Hauptsprache in der\n"
-"Liste und im Fortgeschrittenen-Bereich 鈥濻panisch鈥.\n"
-"\n"
-"Sie sind nicht auf eine weitere Sprache begrenzt. Sie k枚nnen so viele\n"
-"ausw盲hlen, wie Sie wollen, ja sogar alle, indem Sie die Schaltfl盲che 鈥濧lle\n"
-"Sprachen鈥 verwenden. Das Ausw盲hlen einer Sprache beeinflusst die\n"
-"installierten 脺bersetzungen der Programme, Schriften,\n"
-"Rechtschreibkorrekturen, etc. Durch Auswahl des Men眉punkts 鈥濾erwende\n"
-"standardm盲脽ig Unicode鈥 wird das System als Standardkodierung UTF-8\n"
-"Verwenden. Es sei angemerkt, dass diese Funktionalit盲t momentan noch als\n"
-"experimentell eingestuft ist. Sollten Sie jedoch verschiedene Sprachen\n"
-"ausw盲hlen, die unterschiedliche Kodierungen notwendig machen w眉rden, wird\n"
-"die Unicode-Unterst眉tzung auf jeden Fall installiert.\n"
+"Willkommen zum Netzwerk Konfigurationsassistent.\n"
"\n"
-"Um die Spracheinstellungen des ganzen Systems zwischen verschiedenen\n"
-"Sprachen umzuschalten, starten Sie einfach 鈥/usr/sbin/localedrake鈥 unter\n"
-"dem privilegierten Kennzeichen 鈥瀝oot鈥. Wollen Sie die Einstellungen nur f眉r\n"
-"ein Kennzeichen 盲ndern starten Sie den selben Befehl mit eben diesem\n"
-"Kennzeichen."
+"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
+"Falls Sie keine Autodetektion w眉nschen, entfernen Sie bitte die Markierung.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"鈥濪rakX鈥 sucht aufgrund Ihrer Sprachauswahl das f眉r Sie passende\n"
-"Tastaturlayout aus. M枚glicherweise haben Sie jedoch eine Tastatur, die\n"
-"nicht dieser Einstellung entspricht: wenn Sie beispielsweise in der Schweiz\n"
-"eine deutsche Tastatur verwenden wollen oder wenn Sie in Qu茅bec (dem\n"
-"franz枚sischsprachigen Teil Kanadas) eine franz枚sischsprachige Tastatur\n"
-"besitzen. W盲hlen Sie einfach ein passendes Layout aus der Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gew盲hlten Sprache geh枚rende Tastatur\n"
-"verwenden wollen, w盲hlen Sie die Schaltfl盲che 鈥濵ehr鈥. Sie erhalten dann\n"
-"eine Liste aller unterst眉tzten Tastaturen.\n"
-"\n"
-"Sollten Sie sich f眉r ein Tastaturlayout einer nicht lateinischen Sprache\n"
-"entschieden haben, werden Sie im n盲chsten Schritt gefragt, mit welcher\n"
-"Tastenkombination Sie zwischen dem von Ihnen gew盲hlten und dem lateinischen\n"
-"Layout umschalten wollen."
+msgid ")"
+msgstr ")"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Dieser Schritt wird nur aufgerufen, wenn mindestens eine GNU/Linux\n"
-"Partition auf Ihren Festplatten gefunden wird.\n"
-"\n"
-"DrakX fragt Sie nun nach der gew眉nschten Installationsart. Sie haben die\n"
-"Wahl zwischen einer Aktualisierung einer bereits vorhandenen Mandrake\n"
-"Linux-Version oder einer kompletten Neuinstallation:\n"
-"\n"
-" * 鈥濱nstallieren鈥: Entfernt komplett 盲ltere Versionen von Mandrake Linux,\n"
-"die noch installiert sind - um genau zu sein, k枚nnen Sie je nach aktuellem\n"
-"Inhalt Ihrer Platte auch einige 盲ltere Linux- oder anderweitige Partitionen\n"
-"unangetastet behalten.\n"
-"\n"
-" * 鈥濧ktualisieren鈥: Mit dieser Variante k枚nnen Sie eine existierende\n"
-"Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-"pers枚nlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-"Installationsschritte werden wie bei einer Installation ausgef眉hrt.\n"
-"\n"
-"Aktualisierungen von Mandrake Linux 鈥8.1鈥 oder neueren Systemen sollten\n"
-"problemlos funktionieren. 脛ltere Versionen von Mandrake Linux sollten Sie\n"
-"nicht zu aktualisieren versuchen."
+msgid "Lebanon"
+msgstr "Libanon"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"鈥濻taat鈥: 鈥濻taat鈥: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie\n"
-"sich befinden korrekt ist. Falls nicht, bet盲tigen Sie bitte die\n"
-"Schaltfl盲che 鈥濳onfigurieren鈥 und w盲hlen Sie den richtigen. Ist Ihr Staat\n"
-"nicht in der Liste, die Sie gezeigt bekommen, k枚nnen Sie 眉ber die\n"
-"Schaltfl盲che 鈥濵ehr鈥 eine vollst盲ndigere Liste erzwingen."
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als eine Windows-Partition gefunden. W盲hlen Sie bitte, welche\n"
-"Sie verkleinern wollen, um Platz f眉r Ihr neues Mandrake Linux zu schaffen.\n"
-"\n"
-"Die Partitionen werden folgenderma脽en aufgelistet: 鈥濴inux-Name鈥,\n"
-"鈥濿indows-Name鈥, 鈥濳apazit盲t鈥.\n"
-"\n"
-"鈥濴inux-Name鈥 hat folgende Struktur: 鈥濬estplattentyp鈥, 鈥濬estplattennummer鈥,\n"
-"鈥濸artitionsnummer鈥 (etwa 鈥瀐da1鈥).\n"
-"\n"
-"鈥濬estplattentyp鈥 ist 鈥瀐d鈥, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
-"鈥瀞d鈥, wenn es sich um eine SCSI-Platte handelt.\n"
-"\n"
-"鈥濬estplattennummer鈥 ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
-"IDE-Platten bedeutet:\n"
-"\n"
-" * 鈥瀉鈥 bedeutet 鈥濵aster-Platte am prim盲ren IDE-Controller鈥;\n"
-"\n"
-" * 鈥瀊鈥 bedeutet 鈥濻lave-Platte am prim盲ren IDE-Controller鈥;\n"
-"\n"
-" * 鈥瀋鈥 bedeutet 鈥濵aster-Platte am sekund盲ren IDE-Controller鈥;\n"
-"\n"
-" * 鈥瀌鈥 bedeutet 鈥濻lave-Platte am sekund盲ren IDE-Controller鈥;\n"
-"\n"
-"Bei SCSI-Platten steht 鈥瀉鈥 f眉r 鈥瀗iedrigste SCSI-ID鈥, 鈥瀊鈥 f眉r\n"
-"鈥瀦weitniedrigste SCSI-ID鈥, etc.\n"
-"\n"
-"鈥濿indows-Name鈥 ist der Buchstabe, den die Partition unter Windows erhalten\n"
-"w眉rde (die erste Partition der ersten Platte hei脽t 鈥濩:鈥)."
+msgid "Stop"
+msgstr "Stopp"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie m眉ssen nun entscheiden, auf welche(n) Partition(en) Ihr neues Mandrake\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer fr眉heren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), k枚nnen Sie diese verwenden.\n"
-"Anderenfalls m眉ssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen m眉ssen Sie erst eine Festplatte w盲hlen. Sie\n"
-"k枚nnen die Platte w盲hlen in dem Sie 鈥瀐da鈥 f眉r die erste IDE-Platte w盲hlen,\n"
-"鈥瀞da鈥 f眉r die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gew盲hlte Platte zu partitionieren stehen folgende M枚glichkeiten zur\n"
-"Verf眉gung:\n"
-"\n"
-" * 鈥濧lles l枚schen鈥: Bet盲tigen dieser Schaltfl盲che l枚scht alle Partitionen\n"
-"auf der markierten Festplatte.\n"
-"\n"
-" * 鈥濧utomatisches Erstellen鈥: Dieser Punkt aktiviert die automatische ext3-\n"
-"und Swap-Partitionen-Erstellung im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-"鈥濵ehr鈥: bietet Zugriff auf weitere M枚glichkeiten:\n"
-"\n"
-" * 鈥濸artitionstabelle schreiben鈥: Falls Sie Ihre aktuelle Partitionstabelle\n"
-"auf Diskette speichern wollen, falls Sie sie sp盲ter wiederherstellen\n"
-"wollen, k枚nnen Sie das mit Hilfe dieser Schaltfl盲che tun.\n"
-"\n"
-" * 鈥濸artitionstabelle wiederherstellen鈥: Mit dieser Schaltfl盲che k枚nnen Sie\n"
-"eine vorher auf Diskette gesicherte Partitionstabelle wieder herstellen.\n"
-"\n"
-" * 鈥濸artitionstabelle retten鈥: Sollte Ihre Partitionstabelle zerst枚rt\n"
-"worden sein, k枚nnen Sie versuchen, mit dieser Schaltfl盲che eine\n"
-"Restaurierung vorzunehmen. Seien Sie vorsichtig! es ist nicht\n"
-"unwahrscheinlich, dass dieser Versuch fehl schl盲gt.\n"
-"\n"
-" * 鈥濸artitionstabelle neu laden鈥: Alle 脛nderungen verwerfen und mit der\n"
-"urspr眉nglichen Partitionstabelle neu beginnen.\n"
-"\n"
-" * 鈥濿echselmedien automatisch Einh盲ngen鈥: Entfernen dieser Markierung f眉hrt\n"
-"dazu, dass die Anwender hinterher die Wechselmedien manuell ein- und\n"
-"aush盲ngen m眉ssen.\n"
-"\n"
-" * 鈥濧ssistent鈥: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
-"partitionieren sollen, w盲hlen Sie diese Schaltfl盲che. Sie 眉berlassen damit\n"
-"die gesamte Arbeit unserem Assistenten, der mittels 鈥濧bra Kadabra鈥(TM) Ihre\n"
-"Platte partitioniert.\n"
-"\n"
-" * 鈥濺眉ckg盲ngig鈥: Mit dieser Schaltfl盲che k枚nnen Sie alle Einstellungen\n"
-"r眉ckg盲ngig machen.\n"
-"\n"
-" * 鈥濱n den Experten-/ Normal-Modus wechseln鈥: Anbieten bzw. Maskieren von\n"
-"Zusatzm枚glichkeiten.\n"
-"\n"
-" * 鈥濬ertig鈥: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese Schaltfl盲che, um Ihre 脛nderungen zu speichern.\n"
-"\n"
-"Wenn Sie die Gr枚脽e einer Partition festlegen wollen, k枚nnen Sie die\n"
-"Feineinstellungen mit den Rechts- / Links-Pfeiltasten Ihrer Tastatur\n"
-"vornehmen.\n"
-"\n"
-"Information: Sie k枚nnen alle Einstellungen per Tastatur vornehmen. Mittels\n"
-"[Tab] und den Hoch-/Runter Pfeiltasten bewegen.\n"
-"\n"
-"Wenn eine Partition ausgew盲hlt ist, k枚nnen Sie mittels:\n"
-"\n"
-" * Ctrl-C - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * Ctrl-D - die Partition l枚schen\n"
-"\n"
-" * Ctrl-M - dem Einh盲ngpunkt festlegen.\n"
-"\n"
-"Um mehr Informationen 眉ber die verschiedenen Dateisystemtypen zu erhalten,\n"
-"lesen Sie bitte das Kapitel ext2FS in der 鈥濺eferenz鈥.\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1MB, gro脽e HFS Start-Partition f眉r den\n"
-"Betriebssystemstarter yaboot erstellen. Wenn Sie diese Partition etwas\n"
-"gr枚脽er dimensionieren, etwa 50MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in Notf盲llen starten zu\n"
-"k枚nnen."
+msgid "Edit selected host"
+msgstr "脛nderung des markierten Rechners"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nun ist es an der Zeit, die gew眉nschte Sicherheitsebene f眉r Ihr System\n"
-"festzulegen. Als Faustregel sollte hier dienen: Je zug盲nglicher die\n"
-"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
-"h枚her sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
-"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
-"gewisse Befehle/Abl盲ufe durchgef眉hrt werden k枚nnen.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei."
+msgid "No CD device defined!"
+msgstr "Kein CD-Ger盲t angegeben!"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
-"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
-"entdeckt und beseitigt wurden oder da in Paketen Sicherheitsl眉cken entdeckt\n"
-"wurden, f眉r die bereits L枚sungen existieren. Um von diesen aktualisierten\n"
-"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
-"Internet nachzuladen. Bet盲tigen Sie die Schaltfl盲che 鈥濲a鈥, wenn Sie einen\n"
-"Internetzugang haben, um die Pakete zu installieren, andernfalls bet盲tigen\n"
-"Sie die Schaltfl盲che 鈥濶ein鈥. Sie k枚nnen diese Pakete nat眉rlich auch\n"
-"jederzeit nach der Installation noch installieren.\n"
-"\n"
-"Bet盲tigen der Schaltfl盲che 鈥濲a鈥 zeigt Ihnen eine Liste von Servern, von\n"
-"denen Sie die Aktualisierungen herunterladen k枚nnen. W盲hlen Sie einen in\n"
-"Ihrer N盲he. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
-"die Auswahl und best盲tigen Sie diese durch Bet盲tigen von 鈥濱nstallieren鈥.\n"
-"Die Pakete werden nun angefordert und installiert. Sollten Sie das nicht\n"
-"w眉nschen, bet盲tigen Sie einfach die Schaltfl盲che 鈥濧bbruch鈥."
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgarien (Phonetisch)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+msgid "The DHCP start ip"
msgstr ""
-"Alle Partitionen, die gerade neu erzeugt wurden, m眉ssen formatiert werden\n"
-"(d.h. es muss ein Dateisystem auf der Partition erstellt werden), bevor sie\n"
-"verwendet werden k枚nnen.\n"
-"\n"
-"Sie erhalten hier auch die M枚glichkeit bereits existierende Partitionen neu\n"
-"zu formatieren, um die darauf vorhandenen Daten zu l枚schen. Markieren Sie\n"
-"diese einfach ebenfalls in der Liste.\n"
-"\n"
-"Es sei angemerkt, dass nicht alle Partitionen neu formatiert werden m眉ssen.\n"
-"Sie sollten normalerweise nur die Partitionen neu formatieren, die\n"
-"Systemdateien, jedoch keine Privatdaten enthalten (etwa 鈥/鈥, 鈥/usr鈥 oder\n"
-"鈥/var鈥). Partitionen wie etwa 鈥/home鈥 sollten Sie normalerweise nicht neu\n"
-"formatieren.\n"
-"\n"
-"Seien Sie sorgf盲ltig bei der Auswahl der Partitionen. Nach dem Formatieren\n"
-"sind alle zuvor darauf existierenden Daten unwiederbringlich verloren.\n"
-"\n"
-"Wenn Sie alle Einstellungen vorgenommen haben, bet盲tigen Sie die\n"
-"Schaltfl盲che 鈥濿eiter ->鈥, um mit dem Formatieren der Partitionen zu\n"
-"beginnen.\n"
-"\n"
-"Bet盲tigen Sie 鈥<- Zur眉ck鈥, wenn Sie eine andere Partition f眉r Ihr neues\n"
-"Mandrake Linux vorgesehen haben.\n"
-"\n"
-"Bet盲tigen Sie die Schaltfl盲che 鈥濬ortgeschritten鈥, falls Sie Partitionen auf\n"
-"defekte Bl枚cke untersuchen wollen."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart k枚nnen Sie\n"
-"zwischen den auf Ihrer Platte installierten Betriebssystemen ausw盲hlen.\n"
-"Klicken Sie nur noch auf 鈥濷K鈥 und das System wird neu gestartet.\n"
-"\n"
-"Die Schaltfl盲che 鈥濬ortgeschritten鈥 liefert zwei weitere Schaltfl盲chen:\n"
-"\n"
-" * 鈥濫rstellen einer Auto-Installationsdiskette鈥: Hiermit k枚nnen Sie eine\n"
-"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
-"automatische Installation ohne Interaktion eines Administrators\n"
-"durchzuf眉hren k枚nnen.\n"
-"\n"
-" Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfl盲che\n"
-"aktiviert haben:\n"
-"\n"
-" * 鈥濫rneut abspielen鈥: Diese Installation ist nur teilweise automatisch,\n"
-"da der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
-"vonstatten geht.\n"
-"\n"
-" * 鈥濧utomatisiert鈥: Vollautomatische Installation: Die Festplatte wird\n"
-"vollst盲ndig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-" Diese Funktion ist besonders n眉tzlich, wenn man eine Menge von\n"
-"identischer Rechner einrichten will. Weitere Informationen erhalten Sie\n"
-"auch auf der Seite Auto install\n"
-"\n"
-" * 鈥濸aketauswahl speichern鈥:(*) Sie speichern damit die Paketauswahl, die\n"
-"Sie vorher getroffen haben. Wenn Sie sp盲ter eine erneute Installation\n"
-"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
-"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
-"Sie dann 禄linux defcfg=\"floppy\"芦 ein.\n"
-"\n"
-"(*) Sie ben枚tigen eine FAT formatierte Diskette (Mittels 鈥瀖format a:鈥淺n"
-"k枚nnen Sie unter GNU/Linux eine solche erstellen)."
+msgid "256 kB"
+msgstr "256 KB"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-"Sie m眉ssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
-"Betriebssystem alles belegt, m眉ssen die Platte(n) neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
-"f眉r unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
-"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
-"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
-"Entscheidung.\n"
-"\n"
-"Abh盲ngig vom aktuellen Zustand Ihrer Platte(n) haben Sie verschiedene\n"
-"Alternativen:\n"
-"\n"
-" * 鈥濬reien Platz verwenden鈥: Dies f眉hrt einfach dazu, dass Ihre leere(n)\n"
-"Festplatte(n) automatisch partitioniert werden; Sie m眉ssen sich also um\n"
-"nichts weiter k眉mmern.(*)\n"
-"\n"
-" * 鈥濾erwende existierende鈥: Der Assistent hat eine oder mehrere\n"
-"existierende Linux Partitionen auf Ihrer Platte gefunden. W盲hlen Sie diese\n"
-"Schaltfl盲che, falls Sie sie behalten wollen. Sie werden dann gebeten, die\n"
-"Einh盲ngpunkte der Partitionen anzugeben. Als Vorgabe erhalten Sie die\n"
-"Einh盲ngpunkte der gefundenen Distribution, normalerweise ist es nicht n枚tig\n"
-"diese zu 盲ndern.\n"
-"\n"
-" * 鈥濬reien Platz der Windows Partition verwenden鈥: Falls der gesamte\n"
-"Plattenplatz aktuell f眉r Microsoft Windows(TM) verschwendet ist, m眉ssen Sie\n"
-"f眉r GNU/Linux Platz schaffen. Um dies zu erreichen, k枚nnen Sie entweder\n"
-"Ihre Microsoft Windows(TM) Partition(en) samt Daten l枚schen (siehe\n"
-"鈥濳omplette Platte l枚schen鈥) oder Ihre Windows Partition verkleinern.\n"
-"Letzteres geht ohne Datenverlust. Sie sollten diese Variante w盲hlen, falls\n"
-"Sie beide Betriebssysteme (Windows und Mandrake Linux) nebeneinander nutzen\n"
-"wollen.\n"
-"\n"
-" Bevor Sie sich f眉r diese Variante entscheiden, sei hier noch einmal\n"
-"betont, dass das bedeutet, Sie haben weniger Platz f眉r Windows als\n"
-"momentan.\n"
-"\n"
-" * 鈥濳omplette Platte l枚schen鈥: Falls Sie alle Daten Ihrer Platte verlieren,\n"
-"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, w盲hlen Sie\n"
-"diese Schaltfl盲che. Beachten Sie, dass dieser Schritt nicht r眉ckg盲ngig\n"
-"gemacht werden kann.\n"
-"\n"
-" !! Wenn Sie diese Variante w盲hlen, werden alle Ihre Daten auf der Platte\n"
-"gel枚scht! !!\n"
-"\n"
-" * 鈥濿indows(TM) l枚schen鈥: Bei dieser Variante werden alle Windows\n"
-"Partitionen gel枚scht und die Platte(n) komplett neu partitioniert.\n"
-"\n"
-" !! Wenn Sie diese Variante w盲hlen, werden alle Ihre Daten auf der Platte\n"
-"gel枚scht! !!\n"
-"\n"
-" * 鈥濨enutzerdefinierte Partitionierung鈥: Wenn Sie Ihre Festplatte selber\n"
-"von Hand partitionieren wollen, dann k枚nnen Sie diese Option w盲hlen. Seien\n"
-"Sie bitte sehr sorgf盲ltig, wenn Sie diese L枚sung w盲hlen, da Sie zwar alle\n"
-"m枚glichen Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten\n"
-"verlieren k枚nnen. Diese Option ist nur geeignet, wenn Sie wissen, was Sie\n"
-"tun. Um zu erfahren, wie Sie DiskDrake verwenden k枚nnen, lesen Sie bitte\n"
-"das Kapitel 鈥濱hre Partitionen verwalten鈥 im 鈥濻tarter Handbuch鈥淺n"
-"\n"
-"(*) In Deutschland ist es quasi unm枚glich, Komplettrechner mit leeren\n"
-"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
-"d眉rfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
-"propriet盲re kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
-"dass es freie und sogar kostenlose Alternativen gibt. Jeder K盲ufer eines\n"
-"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
-"aus Redmond gleichgesetzt."
+msgid "Bootloader main options"
+msgstr "Haupt-Optionen des Betriebssystemstarters"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Options\n"
-"\n"
-" Sie k枚nnen direkt bei Betriebssystemstart die grafische Umgebung\n"
-"aktivieren. Durch bet盲tigen der Schaltfl盲che 鈥濶ein鈥 wird in eine reine\n"
-"Textumgebung gestartet. Das ist sinnvoll f眉r Server oder wenn Sie bei dem\n"
-"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. W盲hlen Sie\n"
-"鈥濲a鈥, um die grafische Umgebung vorzufinden."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Falls f眉r Ihre Karte verschiedene Server zur Verf眉gung stehen, etwa mit und\n"
-"ohne 3D-Beschleunigung, werden Sie gebeten, den zu w盲hlen, der Ihren\n"
-"Bed眉rfnissen am besten entspricht."
+msgid "Tape"
+msgstr "Bandlaufwerke"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Aufl枚sung\n"
-"\n"
-" Sie k枚nnen hier Aufl枚sung und Farbtiefe f眉r Ihre Hardware w盲hlen.\n"
-"Entscheiden Sie sich, welche Variante Ihren W眉nschen am ehesten entspricht\n"
-"(Sie k枚nnen diese Angaben nat眉rlich nach der Installation noch 盲ndern). Sie\n"
-"k枚nnen sich einen Eindruck anhand des abgebildeten Monitors bilden."
+msgid "Scanning network..."
+msgstr "Netzwerk durchsuchen ..."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-"Monitor\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
-"Probleme auftreten, k枚nnen Sie in der hier aufgef眉hrten Liste Ihr Modell\n"
-"ausw盲hlen."
+"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
+"鈥/etc鈥 Verzeichnisses wiederherzustellen."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen Benutzeroberfl盲che von\n"
-"GNU/Linux. Es bildet die Grundlage f眉r die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
-"AfterStep oder WindowMaker). Auch hier wird 鈥濪rakX鈥 die Konfiguration\n"
-"soweit wie m枚glich selbstst盲ndig vollziehen.\n"
-"\n"
-"Sie erhalten eine Liste m枚glicher Parameter, mit deren Hilfe Sie die\n"
-"Grafikausgabe 盲ndern k枚nnen:\n"
-"\n"
-"Grafikkarte\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
-"entsprechend ein. Sollten dabei Probleme auftreten, k枚nnen Sie in der hier\n"
-"aufgef眉hrten Liste Ihr Modell ausw盲hlen.\n"
-"\n"
-" Falls f眉r Ihre Karte verschiedene Server zur Verf眉gung stehen, etwa mit\n"
-"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu w盲hlen, der Ihren\n"
-"Bed眉rfnissen am besten entspricht.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
-"Probleme auftreten, k枚nnen Sie in der hier aufgef眉hrten Liste Ihr Modell\n"
-"ausw盲hlen.\n"
-"\n"
-"\n"
-"\n"
-"Aufl枚sung\n"
-"\n"
-" Sie k枚nnen hier Aufl枚sung und Farbtiefe f眉r Ihre Hardware w盲hlen.\n"
-"Entscheiden Sie sich, welche Variante Ihren W眉nschen am ehesten entspricht\n"
-"(Sie k枚nnen diese Angaben nat眉rlich nach der Installation noch 盲ndern). Sie\n"
-"k枚nnen sich einen Eindruck anhand des abgebildeten Monitors bilden.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" DrakX versucht eine Testbild mit denen von Ihnen gew眉nschten\n"
-"Einstellungen zu 枚ffnen. Falls Sie w盲hrend des Tests einen Dialog sehen, in\n"
-"dem Sie gefragt werden, ob sie die getroffenen Einstellungen behalten\n"
-"wollen, antworten Sie mit 鈥濲a鈥, damit DrakX mit dem n盲chsten\n"
-"Installationsschritt fortf盲hrt. Sollten Sie die Nachricht nicht sehen,\n"
-"bedeutet das, dass eine oder mehrere getroffene Einstellungen nicht korrekt\n"
-"sind. Nach 12 Sekunden sollten Sie wieder das Installationsmen眉 sehen. Sie\n"
-"k枚nnen nun die Einstellungen 盲ndern, bis Sie das Testbild sehen.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" Sie k枚nnen direkt bei Betriebssystemstart die grafische Umgebung\n"
-"aktivieren. Durch bet盲tigen der Schaltfl盲che 鈥濶ein鈥 wird in eine reine\n"
-"Textumgebung gestartet. Das ist sinnvoll f眉r Server oder wenn Sie bei dem\n"
-"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. W盲hlen Sie\n"
-"鈥濲a鈥, um die grafische Umgebung vorzufinden."
+msgid "Malaysia"
+msgstr "Malaysia"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Grafikkarte\n"
-"\n"
-" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
-"entsprechend ein. Sollten dabei Probleme auftreten, k枚nnen Sie in der hier\n"
-"aufgef眉hrten Liste Ihr Modell ausw盲hlen.\n"
-"\n"
-" Falls f眉r Ihre Karte verschiedene Server zur Verf眉gung stehen, etwa mit\n"
-"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu w盲hlen, der Ihren\n"
-"Bed眉rfnissen am besten entspricht."
+msgid "Swiss (French layout)"
+msgstr "Schweiz (franz枚sisches Layout)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und 眉bersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit.\n"
-"\n"
-"Da Microsoft Windows(TM) nicht sinnvoll mit GMT umgehen kann, m眉ssen Sie\n"
-"鈥濶ein鈥 w盲hlen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
-"auf Ihrem Rechner 鈥瀊eherbergen鈥.\n"
-"\n"
-"Die Verwendung der Option 鈥濧utomatische Zeit-Synchronisation鈥 reguliert\n"
-"Ihre Uhr, indem sie Verbindung mit einem Zeitserver im Internet aufnimmt.\n"
-"W盲hlen Sie aus der Liste einen Server in Ihrer N盲he. Damit die funktioniert\n"
-"ben枚tigen Sie eine st盲ndige Internetverbindung."
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid schlug Fehl (M枚glicherweise fehlen die RAID-Tools)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Als n盲chstes k枚nnen Sie die Dienste ausw盲hlen, die w盲hrend des\n"
-"Betriebssystemstarts aktiviert werden sollen.\n"
-"\n"
-"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
-"zur Verf眉gung stehen, angezeigt. Lesen Sie diese Liste sorgf盲ltig durch und\n"
-"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur Verf眉gung\n"
-"haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anw盲hlen, erhalten Sie eine kurze Erkl盲rung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, ver盲ndern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so m眉ssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: w盲hlen Sie alle Dienste ab, die\n"
-"Sie nicht ben枚tigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von au脽en darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen! !!"
+msgid "Webcam"
+msgstr "Webcams"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"鈥濪rucker鈥: Durch Anwahl der Schaltfl盲che 鈥濳onfigurieren鈥 startet den\n"
-"Druckerassistenten. Weitere Informationen zu diesem Assistenten erhalten\n"
-"Sie im Drucker-Kapitel des 鈥濻tarter Handbuch鈥. Das dort vorgestellte\n"
-"Programm entspricht dem w盲hrend der Installation angebotenen."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Gr枚脽e des Prozessor-Caches (Second Level)."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
-"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
-"verbinden wollen, dann bet盲tigen Sie die Schaltfl盲che 鈥濿eiter ->鈥. Bitte\n"
-"schalten Sie jedoch zuvor, falls n枚tig, die daf眉r ben枚tigten Ger盲te ein,\n"
-"damit 鈥濪rakX鈥 sie automatisch erkennen kann. Sollte die automatische\n"
-"Erkennung nicht korrekt erfolgen, k枚nnen Sie es erneut versuchen, nachdem\n"
-"Sie die Markierung der Option 鈥濧utoerkennung benutzen鈥 entfernt haben.\n"
-"Bet盲tigung der Schaltfl盲che 鈥濧bbruch鈥 bringt Sie weiter zum n盲chsten\n"
-"Installationsschritt ohne Ihr Netzwerk einzurichten.\n"
-"\n"
-"Zur Auswahl stehen folgende Verbindungsarten: Herk枚mmliches Modem, ISDN\n"
-"Modem, ADSL Verbindung, Kabelmodem oder eine einfache LAN Verbindung\n"
-"(Ethernet).\n"
-"\n"
-"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
-"sicher, dass Sie die n枚tigen Parameter von Ihrem Internet Provider oder\n"
-"Systemadministrator erhalten haben.\n"
-"\n"
-"Weitere Einzelheiten, die hier bereits hilfreich sein k枚nnen, erhalten Sie\n"
-"im 鈥濻tarter Handbuch鈥. Falls Sie unsicher sind, warten Sie ab, bis die\n"
-"Installation beendet ist und verwenden Sie danach das beschriebene\n"
-"Programm, um Ihre Verbindung einzurichten."
+msgid "Soundcard"
+msgstr "Soundkarten"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"Schlussendlich erhalten Sie (falls Sie sich f眉r 鈥濱ndividuelle Paketauswahl鈥淺n"
-"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
-"gew眉nschten Gruppen geh枚ren. Diese Pakete sind nach Gruppen und\n"
-"Untergruppen klassifiziert. Beim Durchst枚bern des Baums, k枚nnen Sie\n"
-"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
-"entfernen.\n"
-"\n"
-"Sobald Sie ein Paket ausw盲hlen, erscheint rechts eine kurze Beschreibung.\n"
-"Sobald Sie die Auswahl abgeschlossen haben, best盲tigen Sie das durch\n"
-"Dr眉cken der Schaltfl盲che 鈥濱nstallation鈥. Nun beginnt die eigentliche\n"
-"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
-"k枚nnen Sie nun getrost einen Kaffee trinken gehen.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angew盲hlt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
-"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine Sicherheitsl眉cken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist nat眉rlich nicht auszuschlie脽en, dass\n"
-"sp盲ter solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, w盲hlen Sie sicherheitshalber lieber 鈥濶ein鈥. Falls Sie\n"
-"mit 鈥濲a鈥 antworten, werden die Dienste und Server installiert und stehen\n"
-"Ihnen nach der Installation standardm盲脽ig zur Verf眉gung. !!\n"
-"\n"
-"Die Option 鈥濧utomatische Abh盲ngigkeiten鈥 unterdr眉ckt nur die Warnungen, die\n"
-"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
-"Paketabh盲ngigkeiten aufzul枚sen, wenn Sie ein Paket ausw盲hlen.\n"
-"\n"
-"Das kleine Diskettensymbol am unteren Rand der Liste erm枚glicht es Ihnen,\n"
-"die w盲hrend einer vorangegangenen Installation gespeicherte Paketauswahl\n"
-"erneut zu verwenden. Durch Bet盲tigen der Schaltfl盲che 枚ffnen Sie einen\n"
-"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
-"fr眉heren Installation enth盲lt. Um zu erfahren, wie Sie diese Diskette\n"
-"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
-"Installationsschrittes."
+"Verwenden Sie den Befehl 鈥%s <Datei>鈥, um die Datei <Datei> in der "
+"Kommandozeile auszudrucken.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen f眉r Mandrake Linux, und\n"
-"Sie m眉ssen sie nicht alle auswendig kennen.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
-"wiederum enthalten vier Abschnitte:\n"
-"\n"
-" * 鈥濧rbeitsplatzrechner鈥: Falls Ihr Rechner als Arbeitsplatzrechner\n"
-"verwendet werden soll, markieren Sie eine oder mehrere Gruppen.\n"
-"\n"
-" * 鈥濫ntwicklungsplattform鈥: Falls Sie mit Ihrem Rechner programmieren\n"
-"wollen, sollten Sie diese Gruppe markieren.\n"
-"\n"
-" * 鈥濻erver鈥: Wenn Ihre Maschine ein Server werden soll, k枚nnen Sie hier die\n"
-"wichtigsten Dienste ausw盲hlen, die auf Ihren Rechner installiert werden\n"
-"sollen.\n"
-"\n"
-" * 鈥濭rafische Oberfl盲che鈥: W盲hlen Sie hier Ihre bevorzugte grafische\n"
-"Arbeitsoberfl盲che. Wenn Sie eine grafische Oberfl盲che verwenden wollen, so\n"
-"m眉ssen Sie hier zumindest eine Gruppe ausw盲hlen.\n"
-"\n"
-"Wenn Sie die Maus 眉ber eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erkl盲renden Text 眉ber die Gruppe. Falls Sie bei einer Installation alle\n"
-"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
-"verschiedenen Minimalinstallationen w盲hlen k枚nnen:\n"
-"\n"
-" * 鈥濵it X鈥 Installiert eine rudiment盲re grafische Oberfl盲che;\n"
-"\n"
-" * 鈥濵it minimaler Dokumentation鈥 Installiert das Basissystem zuz眉glich\n"
-"grundlegender Werkzeuge inklusive deren Dokumentation. Dies ist die\n"
-"sinnvollste Wahl f眉r eine Serverinstallation.\n"
-"\n"
-" * 鈥濫xtrem minimale Installation鈥 Sie erhalten eine komplett 鈥瀗ackte鈥 65MB\n"
-"gro脽e GNU/Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich\n"
-"von selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
-"\n"
-"Wenn Sie die Schaltfl盲che 鈥濬ortgeschritten鈥 anw盲hlen, erhalten Sie die\n"
-"M枚glichkeit, eine 鈥濱ndividuelle Paketauswahl鈥 durchzuf眉hren. Das macht nur\n"
-"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
-"dar眉ber haben wollen, was installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als 鈥濧ktualisierung鈥 gestartet, k枚nnen Sie die\n"
-"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
-"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
-"oder repariert."
+msgid "Level %s\n"
+msgstr "Level %s\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Da die Mandrake Linux-Distribution stetig w盲chst, wurde sie in mehrere\n"
-"CD-ROMs unterteilt. Es kann daher vorkommen, dass 鈥濪rakX鈥 Pakete von\n"
-"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
-"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
+msgid "Luxembourg"
+msgstr "Luxemburg"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" DrakBackup Daemon Report\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"Sie erhalten die Liste, der auf Ihren Festplatten gefundenen GNU/Linux\n"
-"Partitionen. Sie k枚nnen die Auswahl des Assistenten beibehalten - sie\n"
-"sollte normalerweise Ihren Bed眉rfnissen entsprechen. Falls Sie es vorziehen\n"
-"die Einh盲ngpunkte selbst zu definieren, denken Sie bitte daran, dass Sie\n"
-"zumindest eine Verzeichnisbaumwurzel (鈥/鈥) ben枚tigen. W盲hlen Sie die\n"
-"Partitionen nicht zu klein, da Sie sonst nicht gen眉gend Programme\n"
-"installieren k枚nnen. Wenn Sie Ihre pers枚nlichen Daten auf einer eigenen\n"
-"Partition halten wollen, legen Sie sich eine Partition namens 鈥/home鈥 an.\n"
-"\n"
-"Die Partitionen werden folgenderma脽en aufgelistet: 鈥濶ame鈥, 鈥濳apazit盲t鈥.\n"
-"\n"
-"鈥濶ame鈥 hat folgende Struktur: 鈥濬estplattentyp鈥, 鈥濬estplattennummer鈥,\n"
-"鈥濸artitionsnummer鈥 (etwa 鈥瀐da1鈥).\n"
-"\n"
-"鈥濬estplattentyp鈥 ist 鈥瀐d鈥, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
-"鈥瀞d鈥, wenn es sich um eine SCSI-Platte handelt.\n"
"\n"
-"鈥濬estplattennummer鈥 ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
-"IDE-Platten bedeutet:\n"
-"\n"
-" * 鈥瀉鈥 bedeutet 鈥濵aster-Platte am prim盲ren IDE-Controller鈥;\n"
-"\n"
-" * 鈥瀊鈥 bedeutet 鈥濻lave-Platte am prim盲ren IDE-Controller鈥;\n"
-"\n"
-" * 鈥瀋鈥 bedeutet 鈥濵aster-Platte am sekund盲ren IDE-Controller鈥;\n"
-"\n"
-" * 鈥瀌鈥 bedeutet 鈥濻lave-Platte am sekund盲ren IDE-Controller鈥;\n"
+" DrakBackup D盲mon Report\n"
"\n"
-"Bei SCSI-Platten steht 鈥瀉鈥 f眉r 鈥瀗iedrigste SCSI-ID鈥, 鈥瀊鈥 f眉r\n"
-"鈥瀦weitniedrigste SCSI-ID鈥, etc."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene Pr盲ferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"k枚nnen Sie im 鈥濻tarter Handbuch鈥 nachsehen. Sie k枚nnen mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum 鈥瀙rivilegierten鈥 Kennzeichen:\n"
-"禄root芦, das einmalig ist. Im Gegensatz zu 禄root芦 k枚nnen diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen ver盲ndern. Sie\n"
-"k枚nnen sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gew盲hren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht st盲ndig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann k枚nnen Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. 鈥濪rakX鈥 wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld 鈥濨enutzerkennzeichen鈥 eintragen. Dies ist\n"
-"der Name, den Sie zum Anmelden f眉r dieses Kennzeichen ben枚tigen. Nat眉rlich\n"
-"k枚nnen Sie ihn hier nach Belieben ver盲ndern. Dann geben Sie Ihrem Konto ein\n"
-"Passwort. F眉r ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
-"herausragender Bedeutung wie das f眉r 禄root芦, doch Sie sollten trotzdem\n"
-"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten ...\n"
-"\n"
-"Klicken Sie auf 鈥濨enutzer akzeptieren鈥, um das Kennzeichen zu erstellen.\n"
-"Anschlie脽end k枚nnen Sie direkt weitere Benutzer hinzuf眉gen. Wenn Sie alle\n"
-"Kennzeichen erstellt haben, klicken Sie auf 鈥濿eiter ->鈥.\n"
-"\n"
-"Durch Anwahl der Schaltfl盲che 鈥濬ortgeschritten鈥 haben Sie auch die\n"
-"M枚glichkeit, die Standard-Shell dieses Benutzers 盲ndern (normalerweise ist\n"
-"dies die 鈥濨ash鈥).\n"
-"\n"
-"Wenn Sie alle Kennzeichen erstellt haben, die Sie nutzen wollen, wird Ihnen\n"
-"die M枚glichkeit er枚ffnet, ein Kennzeichen automatisch beim\n"
-"Betriebssystemstart angemeldet zu bekommen. Falls Sie sich f眉r diese\n"
-"Funktionalit盲t entscheiden (und wenig Wert auf Sicherheit legen) w盲hlen Sie\n"
-"einfach die gew眉nschte Arbeitsumgebung und das Kennzeichen aus. Best盲tigen\n"
-"Sie Ihre Auswahl durch bet盲tigen der Schaltfl盲che 鈥濿eiter ->鈥. Andernfalls\n"
-"l枚schen Sie einfach die Markierung des Punktes 鈥濵枚chten Sie diese\n"
-"M枚glichkeit nutzen?鈥."
+msgid "Iran"
+msgstr "Iran"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Lesen Sie bitte aufmerksam die Lizenz, bevor Sie fortfahren. Sie umfasst\n"
-"die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen Punkten\n"
-"zustimmen, bet盲tigen Sie bitte die Schaltfl盲che 鈥瀂ur眉ckweisen鈥, um die\n"
-"Installation abzubrechen. Um mit der Installation fortzufahren, bet盲tigen\n"
-"Sie die Schaltfl盲che 鈥濧kzeptieren鈥."
+msgid "Bus"
+msgstr "Bus"
-#: ../../install2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr "Sie m眉ssen auch %s formatieren."
+msgid "Iraq"
+msgstr "Irak"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
-"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
-"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
-"Installationsmedium 眉bereinstimmt (Bitte erstellen Sie eine neue "
-"Startdiskette). "
+"Es liegt ein m枚glicher LAN-Adressen Konflikt in der Konfiguration\n"
+"von %s vor!\n"
-#: ../../install_any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine g眉ltigen Ger盲te gefunden, auf "
-"denen neue Dateisysteme erstellt werden k枚nnen. Bitte 眉berpr眉fen Sie Ihre "
-"Hardware(-Konfiguration) auf m枚gliche Fehler und falsche Einstellungen."
+msgid "Configuring..."
+msgstr "Konfigurieren ..."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
-#: ../../install_any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
-"Installation bitte mit: 鈥瀊oot defcfg=floppy鈥"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Diese Diskette ist nich FAT formatiert"
+"F眉r die meisten modernen TV-Karten erkennt das bttv-Modul des Linux Kerns "
+"automatisch die richtigen Parameter.\n"
+"Falls Ihre Karte falsch erkannt wird, k枚nnen Sie Tuner- und Kartentyp hier "
+"eintellen. Geben Sie einfach die ben枚tigten Parameter an."
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
+msgid "Password (again)"
+msgstr "Passwort (erneut)"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS Dom盲ne angegeben wurde"
+msgid "Search installed fonts"
+msgstr "Suche installierte Schriften"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Folgende Pakete werden entfernt, um das Aktualisieren Ihres Rechners zu "
-"erm枚glichen: %s\n"
-"\n"
-"\n"
-"Wollen Sie diese Pakete wirklich entfernen?\n"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No"
-msgstr "Nein"
+msgid "IP address"
+msgstr "IP Adresse"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "Choose the sizes"
+msgstr "W盲hlen Sie die Gr枚脽en"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
+"List of data corrupted:\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Sie haben die folgenden Server ausgew盲hlt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardm盲脽ig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, jedoch k枚nnten einige neue entdeckt werden. Stellen\n"
-"Sie deshalb sicher, dass Sie diese Pakete so zeitig wie m枚glich "
-"aktualisieren.\n"
-"\n"
+"Liste der besch盲digten Daten:\n"
"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Systemkonfiguration"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Installation"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug Fehl: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX Partitionierungsassistent fand folgende L枚sung:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ich finde nicht genug Platz f眉r die Installation."
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-"Sie k枚nnen nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
+"Ihr Modem wird nicht durch das System unterst眉tzt.\n"
+"Schauen Sie unter http://www.linmodems.org"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"S脛MTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
+msgid "Choose another partition"
+msgstr "W盲hlen Sie eine andere Partition"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
+msgid "Current user"
+msgstr "Aktueller Benutzer"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Komplette Platte l枚schen"
+msgid "Username"
+msgstr "Benutzerkennzeichen"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) l枚schen"
+msgid "Left \"Windows\" key"
+msgstr "Linke 鈥濿indows鈥-Taste"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Sie haben keine FAT Partition, deren Gr枚脽e ich anpassen kann\n"
-"(m枚glicherweise haben Sie auch einfach nur nichtmehr gen眉gend\n"
-"freien Speicher)."
+msgid "dhcpd Server Configuration"
+msgstr "dhcpd Server Konfiguration"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Gr枚脽enanpassung schlug Fehl: %s"
-
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Errechne die Grenzen des Windows Dateisystems"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Neuberechnen der Gr枚脽e"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "auf dem Novell-Server 鈥%s鈥, Drucker 鈥%s鈥"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
+msgid "Remove a module"
+msgstr "Modul entfernen"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Wieviel Platz ben枚tigen sie noch f眉r Windows auf"
+msgid "Password"
+msgstr "Passwort"
-#: ../../install_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"DrakX wird nun die Gr枚脽e Ihrer Windows Partition ver盲ndern.\n"
-"Seien Sie Vorsichtig: Diese Aktion ist gef盲hrlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"scandisk (sowie m枚glicherweise defrag) unter Windows auf die Partition \n"
-"anzuwenden. Anschlie脽end k枚nnen Sie die Installation erneut starten.\n"
-"Sie sollten nat眉rlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, k枚nnen Sie mit OK fortfahren."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst 鈥瀌efrag鈥 unter Windows."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Berechnung der Gr枚脽e der Windows Partition"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Das Werkzeug zum Ver盲ndern der FAT Partitionsgr枚脽e kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
-"%s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die Gr枚脽e 盲ndern?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows Partition verwenden"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"Sie haben keine FAT Partition, die ich als Loopback verwenden kann\n"
-"(m枚glicherweise haben Sie auch einfach nur nichtmehr gen眉gend\n"
-"freien Speicher)."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Gr枚脽e der Auslagerungspartition in MB: "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Gr枚脽e der Verzeichnisbaumwurzel-Partition in MB: "
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "W盲hlen Sie die Gr枚脽en"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows Partition Loopbacks anlegen"
+msgid "Advanced Configuration"
+msgstr "Expertenkonfiguration"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
+msgid "Scanning on your HP multi-function device"
+msgstr "Scannen auf Ihrem HP Multifunktionsger盲t"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Verwende existierende Partition(en)"
+msgid "Root"
+msgstr "Verzeichnisbaumwurzel"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu k枚nnen."
+msgid "Choose an existing RAID to add to"
+msgstr "W盲hlen Sie einen vorhandenen RAID"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "T眉rkei (modernes 鈥濹鈥 Modell)"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie m眉ssen eine FAT Partition in 鈥/boot/efi鈥 eingeh盲ngt haben."
+msgid "Lilo message not found"
+msgstr "Ich kann die LILO Nachricht nicht finden."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"Sie haben keine Auslagerungspartition\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
+"Automatische Neuerstellung der Kern-Header in /boot f眉r\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine Verzeichnisbaumwurzel.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"W盲hlen Sie 鈥濫inh盲ngpunkt鈥 und setzen Sie ihn auf 鈥/鈥"
+msgid "if needed"
+msgstr " falls N枚tig "
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware Komponenten Ihres Rechners ben枚tigen 鈥瀙ropriet盲re鈥淺n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
+msgid "Restore Failed..."
+msgstr "Wiederherstellen fehlgeschlagen..."
-#: ../../install_messages.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Herzlichen Gl眉ckwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und dr眉cken Sie die "
-"Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"F眉r Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
-"Linux informieren Sie sich bitte unter \n"
-"\n"
-"%s\n"
-"\n"
-"Wie Sie Ihr System warten k枚nnen, erfahren Sie im Kapitel 鈥濶ach der "
-"Installation鈥 im offiziellen Benutzerhandbuch von Mandrake Linux."
-
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+msgid "/Autodetect _jazz drives"
+msgstr "/_Jazz-Laufwerke automatisch erkennen"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Description:\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-"Achtung\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-"Bitte lesen Sie die nachfolgenden Ausf眉hrungen sorgf盲ltig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, d眉rfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf 鈥瀂ur眉ckweisen鈥, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder 盲hnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgf盲ltig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, d眉rfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(au脽er f眉r Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder Ver盲ndern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz einger盲umten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einr盲umt, d眉rfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze f眉r\n"
-"Softwareprodukte gesch眉tzt.\n"
+msgstr ""
#: ../../install_messages.pm:1
#, c-format
@@ -4049,7840 +988,9882 @@ msgstr ""
"litige. Pour toute question relative au pr茅sent document, veuillez \n"
"contacter MandrakeSoft S.A.\n"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt 鈥%s鈥淺n"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Help"
-msgstr "Hilfe"
+msgid "Current interface configuration"
+msgstr "Aktuelle Schnittstellenkonfiguration"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "not configured"
-msgstr "Nicht eingerichtet"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Configure"
-msgstr "Konfigurieren"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
+"n盲chsten Schirm korrekt sein.\n"
+"\n"
+"Falls Sie eine PCMCIA-Karte besitzen, m眉ssen Sie IRQ und E/A-Bereich Ihrer "
+"Karte kennen.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
+msgid "Do not print any test page"
+msgstr "Keine Testseite(n) drucken"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
+msgid "Gurmukhi"
+msgstr "Indien (Gurmukhi)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
+msgid "Force No APIC"
+msgstr "No ACPI erzwingen"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"\n"
-"Bitte legen Sie die CD-ROM 鈥%s鈥 in Ihr Laufwerk,\n"
-"dann dr眉cken Sie OK.\n"
-"Falls Sie sie nicht vorliegen haben, dr眉cken Sie Abbruch."
+"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Refuse"
-msgstr "Zur眉ckweisen"
+msgid "[keyboard]"
+msgstr "[Tastatur]"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Accept"
-msgstr "Akzeptieren"
+msgid "FTP proxy"
+msgstr "FTP Proxy"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Pakets %s"
+msgid "Install List"
+msgstr "Liste installieren"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Details"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"脛ndern\n"
+"Pfad wiederherstellen"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Details"
-msgstr "Details"
+msgid "Show only for the selected day"
+msgstr "Nur f眉r diesen Tag zeigen"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Bitte warten, bereite Installation vor"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Estimating"
-msgstr "Sch盲tzung"
+msgid "Logs"
+msgstr "Logs"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installing"
-msgstr "Installation wird durchgef眉hrt"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Anmerkung: Parallelports k枚nnen nicht automatisch erkannt werden)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete ausw盲hlen"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimal-Installation"
+msgid "What kind of card do you have?"
+msgstr "Welchen Kartentyp verwenden Sie?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Laden von/Speichern auf Diskette"
+msgid "Security"
+msgstr "Sicherheit"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Zur眉ck"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"Sie k枚nnen auch das Grafikwerkzeug 鈥瀤pdq鈥 zum setzen der Optionen und "
+"Verwalten der Druckjobs verwenden.\n"
+"Falls Sie KDE als Arbeitsoberfl盲che nutzen, haben Sie eine Panik-Abschaltung "
+"in Forma des Arbeitsfl盲chensymbols 鈥濻TOP Printer!鈥, dass sofort alle "
+"Druckauftr盲ge anh盲, wenn Sie es bet盲gen. Das kann beispielsweise dann "
+"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Install"
-msgstr "Installation"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Anzeige automatisch markierter Pakete"
+msgid "Unknown"
+msgstr "Unbekannt"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-"Sie k枚nnen dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
+"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugef眉gt "
+"werden.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Netzwerk konfigurieren"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
+"Protokoll f眉r den Rest der Welt \n"
+"ohne D-Kanal (Leased Lines)"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
+msgid "Option %s must be a number!"
+msgstr "Der Parameter %s muss eine Zahl sein!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Anmerkung"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Sie k枚nnen dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dieses Paket ist existenziell, sie k枚nnen es nicht deselektieren"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Sie k枚nnen dieses Paket nicht ausw盲hlen/es aus der Auswahl entfernen."
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Sie haben Ihre grafische Umgebung nicht konfiguriert. Sind Sie sicher?"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Die Einrichtung des Druckers wird vollautomatisch erfolgen. Sollte Ihr "
+"Drucker nicht richtig erkannt worden sein oder wollen Sie die Einrichtung "
+"selbst vornehmen, w盲hlen Sie 鈥濵anuelle Konfiguration鈥."
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert werden"
+msgid "What type of partitioning?"
+msgstr "Welcher Partitionstyp?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Sie k枚nnen dieses Paket nicht ausw盲hlen, da Sie nicht genug Plattenplatz "
-"haben."
+"Dateiliste gesendet per FTP: %s\n"
+" "
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Wichtigkeit: %s\n"
+msgid "Interface"
+msgstr "Schnittstelle"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
+"Parameter:\n"
+"\n"
+" - Systemdateien sichern:\n"
+" \n"
+"\tDiese Option erlaub es Ihnen Ihr 鈥/etc鈥 Verzeichnis\n"
+"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
+"\tsichern. Seien Sie vorsichtig, damit Sie w盲hrend der\n"
+"\tWiederherstellung folgende Dateien nicht 眉berschreiben:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Benutzerdateien sichern:\n"
+"\n"
+"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
+"\tzeichen zu w盲hlen, deren Daten gesichert werden\n"
+"\tsollen.\n"
+"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
+"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
+"\n"
+" - Andere Dateien sichern:\n"
+"\n"
+"\tMit dieser Option k枚nnen Sie weitere Dateienn\n"
+"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
+"\tverwenden, k枚nnen Sie momentan keine inkre-\n"
+"\tmentellen Aktualisierungen vornehmen.\n"
+"\n"
+" - Inkrementelle Archivierung:\n"
+"\n"
+"\tInkrementelle Archivierung ist die m盲chtigste\n"
+"\tder vorhandenen Optionen. Sie erlaubt es\n"
+"\tIhnen beim ersten Aufruf eine komplette\n"
+"\tSicherungskopie Ihres Systems zu erstellen und\n"
+"\tanschlie脽nd nur noch 脛nderungen zu speichern.\n"
+"\tSomit sind Sie in der Lage, w盲hrend des Wieder-\n"
+"\therstellens, den Datenbestand eines bestimmten\n"
+"\tZeitpunkts zu erzeugen.\n"
+"\tSollten sie diese Alernative nicht gew盲hlt haben,\n"
+"\twerden die alten Sicherungen vor dem Ertellen\n"
+"\teiner neuen Sicherungskopie gel枚scht.\n"
+"\n"
+"\n"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Gr枚脽e: %d KB\n"
+msgid ""
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
+msgid "comma separated strings"
+msgstr "durch Kommas getrennte Textfelder"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Name: %s\n"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Das sind die Rechner, f眉r die der Scanner zug盲nglich sein soll:"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Ung眉ltiges Paket"
+msgid "Messages"
+msgstr "Nachrichten"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Other"
-msgstr "Andere"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Unbekannt|CPH06X (bt878) [Zahlreiche Hersteller]"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Gesamtgr枚脽e: %d / %d MB"
+msgid "POP and IMAP Server"
+msgstr "POP und IMAP Server"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Weiter ->"
+msgid "Mexico"
+msgstr "Mexiko"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
+msgid "Model stepping"
+msgstr "Modell-Staffelung"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-"Text-Installation versuchen. Dr眉cken Sie daf眉r <F1> w盲hrend dem \n"
-"Installationsstart und geben Sie 鈥瀟ext鈥 an der Eingabeaufforderung \n"
-"ein."
+msgid "Do you have any %s interfaces?"
+msgstr "Verf眉gen Sie 眉ber %s Schnittstellen?"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
+msgid "Switzerland"
+msgstr "Schweiz"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatisiert"
+msgid "Brunei Darussalam"
+msgstr "Brunei "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Erneut abspielen"
+msgid "Remote lpd Printer Options"
+msgstr "Optionen f眉r Netzwerk-Druckerspooler"
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
-"You may prefer to replay the installation.\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollst盲ndig durch DrakX rekonfiguriert\n"
-"(diese M枚glichkeit ist f眉r die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
+"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
+"Benutzerkennzeichen hat eigene Pr盲ferenzen (Grafische Umgebung,\n"
+"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
+"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
+"k枚nnen Sie im 鈥濻tarter Handbuch鈥 nachsehen. Sie k枚nnen mehrere normale\n"
+"Benutzerkonten einrichten, im Gegensatz zum 鈥瀙rivilegierten鈥 Kennzeichen:\n"
+"禄root芦, das einmalig ist. Im Gegensatz zu 禄root芦 k枚nnen diese normalen\n"
+"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen ver盲ndern. Sie\n"
+"k枚nnen sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
+"Zugang zu Ihrem GNU/Linux-System gew盲hren wollen. Erstellen Sie sich ein\n"
+"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
+"diesen Rechner nutzt. Sie sollten nicht st盲ndig mit dem privilegierten\n"
+"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
+"schweren Fehler als einfacher Benutzer machen, dann k枚nnen Sie maximal\n"
+"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzuf眉hren.\n"
+"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
+"notwendigerweise Ihr richtiger Name sein. 鈥濪rakX鈥 wird das erste Wort, das\n"
+"Sie eingegeben haben, in das Feld 鈥%s鈥 eintragen. Dies ist der Name, den\n"
+"Sie zum Anmelden f眉r dieses Kennzeichen ben枚tigen. Nat眉rlich k枚nnen Sie ihn\n"
+"hier nach Belieben ver盲ndern. Dann geben Sie Ihrem Konto ein Passwort. F眉r\n"
+"ein Benutzerkennzeichen ist dieses zwar nicht von so herausragender\n"
+"Bedeutung wie das f眉r 禄root芦, doch Sie sollten trotzdem etwas Sorgfalt\n"
+"walten lassen. Immerhin sind es Ihre Daten ...\n"
+"\n"
+"Klicken Sie auf 鈥%s鈥, um das Kennzeichen zu erstellen. Anschlie脽end k枚nnen\n"
+"Sie direkt weitere Benutzer hinzuf眉gen. Wenn Sie alle Kennzeichen erstellt\n"
+"haben, klicken Sie auf 鈥%s鈥.\n"
+"\n"
+"Durch Anwahl der Schaltfl盲che 鈥%s鈥 haben Sie auch die M枚glichkeit, die\n"
+"Standard-Shell dieses Benutzers 盲ndern (normalerweise ist dies die 鈥濨ash鈥).\n"
+"\n"
+"Wenn Sie alle Kennzeichen erstellt haben, die Sie nutzen wollen, wird Ihnen\n"
+"die M枚glichkeit er枚ffnet, ein Kennzeichen automatisch beim\n"
+"Betriebssystemstart angemeldet zu bekommen. Falls Sie sich f眉r diese\n"
+"Funktionalit盲t entscheiden (und wenig Wert auf Sicherheit legen) w盲hlen Sie\n"
+"einfach die gew眉nschte Arbeitsumgebung und das Kennzeichen aus. Best盲tigen\n"
+"Sie Ihre Auswahl durch bet盲tigen der Schaltfl盲che 鈥%s鈥. Andernfalls l枚schen\n"
+"Sie einfach die Markierung des Punktes 鈥%s鈥."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
+msgid "Configure Internet Access..."
+msgstr "Internet-Zugang konfigurieren"
-#: ../../install_steps_interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Reboot"
-msgstr "Systemneustart"
+msgid "Norway"
+msgstr "Norwegen"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
+msgid "Danish"
+msgstr "D盲nemark"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Erstellen einer Auto-Installationsdiskette"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Schaltet beim Betriebssystemstart automatisch die 鈥濶um鈥-Taste f眉r \n"
+"die virtuellen Konsolen und XFree ein."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in das %s ein."
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
+"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
+"angegeben werden (etwa 鈥192.168.1.42鈥)."
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-"Sie m眉ssen Ihr Open Firmware Startger盲t anpassen, dass es den \n"
-"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des BS-Starters sehen, dr眉cken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
+"Da die Mandrake Linux-Distribution stetig w盲chst, wurde sie in mehrere\n"
+"CD-ROMs unterteilt. Es kann daher vorkommen, dass 鈥濪rakX鈥 Pakete von\n"
+"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
+"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
+msgid "Processors"
+msgstr "Prozessoren"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Betriebssystemstarter installieren"
+msgid "Bulgaria"
+msgstr "Bulgarien"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die Zerst枚rung der ersten \n"
-"Partition verursachen kann?"
+msgid "No NIC selected!"
+msgstr "Keine Netzwerkkarte ausgew盲hlt!"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "M枚chten Sie 鈥瀉boot鈥 verwenden?"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard and Jan Mayen Islands (Norwegen)"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Sie scheinen einen 鈥濷ldWorld鈥 oder unbekannten\n"
-"Rechner zu verwenden. Der Betriebssystemstarter\n"
-"鈥瀥aboot鈥 wird daher leider nicht funktionieren.\n"
-"Die Installation wird fortgesetzt, sie werden jedoch \n"
-"鈥濨ootX鈥 verwenden m眉ssen um LINUX auf Ihrem Rechner\n"
-"zu starten."
+"W盲hrend der Konfiguration traten Fehler auf.\n"
+"Kontrollieren Sie Ihre Verbindung mit 鈥瀗et_monitor鈥 oder dem Mandrake "
+"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
+"die Konfguration starten."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Betriebssystemstarter vorbereiten..."
+msgid "partition %s is now known as %s"
+msgstr "Die Partition %s hei脽t nun %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Paswort des Administrators"
+msgid "Backup Other files..."
+msgstr "Andere Dateien sichern ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Name des Dom盲nenadministrators"
+msgid "SMB server IP"
+msgstr "SMB-Server-IP"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows Dom盲ne"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Windows Dom盲nenauthentifizierung"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Die Partitionstabelle der Platte 鈥%s鈥 wird gespeichert!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing HPOJ package..."
+msgstr "Installiere HPOJ Paket..."
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
msgstr ""
-"Damit dies mit einem Windows 2000-Dom盲nen-Controller funktioniert, muss der "
-"Administrator folgendes Ausf眉hren: 鈥濩:\\>net localgroup \"Pre-Windows 2000 "
-"Compatible Access\" everyone /add鈥. Anschlie脽end muss der Server neu "
-"gestartet werden.\n"
-"Damit Sie Ihren Mandrake Linux Rechner zur Windows(TM) Dom盲ne hinzuf眉gen "
-"k枚nnen, ben枚tigen Sie noch Kennzeichen und Passwort eines "
-"Dom盲nenadministrators.\n"
-"Sollte das Netzwerk noch nicht aktiv sein, wird DrakX nach der "
-"Netzwerkkonfiguration versuchen, sich in die Dom盲ne zu integrieren.\n"
-"Sollte dies schief gehen, und die Dom盲nenauthentifizierung funktioniert "
-"nicht, verwenden Sie nach der Instalation von Mandrake Linux folgenden "
-"Befehl: 鈥瀞mbpasswd -j DOM脛NE -U KENNZEICEN%%PASSWORT鈥, wobei 鈥濪OM脛NE鈥 die "
-"Windows(TM) Dom盲ne ist, 鈥濳ENNZEICHEN鈥 und 鈥濸ASSWORT鈥 das Kennzeichen und das "
-"Passwort des Dom盲nenadministrators.\n"
-"Mit 鈥瀢binfo -t鈥 k枚nnen Sie anschlie脽end testetn, ob die Anmeldung "
-"erfolgreich war."
+"Mit einer individuellen Startdiskette k枚nnen Sie Ihr LINUX-System starten, \n"
+"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
+"n眉tzlich, wenn \n"
+"Sie weder LILO noch Grub auf Ihrem System installieren m枚chten, wenn ein \n"
+"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
+"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
+"korrekt \n"
+"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
+"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
+"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
+"\n"
+"M枚chten Sie jetzt eine Startdiskette f眉r Ihr System erstellen?\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS Server"
+msgid ", USB printer \\#%s"
+msgstr ", USB-Drucker \\#%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domain"
+msgid "Latvian"
+msgstr "Lettland"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS Authentifizierung"
+msgid "monthly"
+msgstr "monatlich"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Module name"
+msgstr " Modulname "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Server"
+msgid "Start at boot"
+msgstr "Beim BS-Start aktivieren"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
+
+#: ../../any.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "First sector of drive (MBR)"
+msgstr "Erster Sektor der Platte (MBR)"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP Authentifizierung"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Local files"
-msgstr "Lokale Dateien"
+msgid "Use Unicode by default"
+msgstr "Verwende standardm盲脽ig Unicode"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Authentication"
-msgstr "Authentifizierung"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "Das Linux Kernmodul, das Unterst眉tzung f眉r dieses Ger盲t bereitstellt"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
+msgid "Trying to rescue partition table"
+msgstr "Ich Versuche, die Partitionstabelle zu retten"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No password"
-msgstr "Kein Passwort"
+msgid "Option %s must be an integer number!"
+msgstr "Der Parameter %s muss eine Zahl sein!"
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Root-Passwort setzen"
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
+"Angaben, die Sie machen m眉ssen:\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Sie haben Ihre grafische Umgebung nicht konfiguriert. Sind Sie sicher?"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzuf眉hren!!!\n"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d aktiviert von %d registrierten."
+msgid "Name: "
+msgstr "Name: "
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Services"
-msgstr "Dienste"
+msgid "16 million colors (24 bits)"
+msgstr "16 Millionen Farben (24 Bit)"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "System"
-msgstr "System"
+msgid "Allow all users"
+msgstr "Allen Benutzern erlauben"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "%s (Port %s)"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "Der offizille MandrakeSoft Laden"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Betriebssystemstarter"
+msgid "Resizing"
+msgstr "Neuberechnen der Gr枚脽e"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Boot"
-msgstr "BS-Start"
+msgid "Cable connection"
+msgstr "Kabel Verbindung"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "disabled"
-msgstr "deaktiviert"
+msgid "User"
+msgstr "Benutzer"
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiviert"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"Ich kann die Partitionstabelle von 鈥%s鈥 nicht verstehen. Sie scheint \n"
+"fehlerhaft zu sein :-(\n"
+"Ich kann fortfahren, indem ich die fehlerhaften Partitionen l枚sche \n"
+"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ k枚nnen \n"
+"Sie mir jedoch auch verbieten, die Partitionstabelle zu ver盲ndern.\n"
+"(Folgender Fehler trat auf: 鈥%s鈥).\n"
+"\n"
+"Sind Sie einverstanden, dass ich die problematischen Partitionen l枚sche?\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Firewall"
-msgstr "Firewall"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Erstelle Sicherung vor dem Wiederherstellen (nur f眉r inkrementelle "
+"Sicherungen)."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security"
-msgstr "Sicherheit"
+msgid "Printer on parallel port \\#%s"
+msgstr "Drucker an Parallelport \\#%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Security Level"
-msgstr "Sicherheitsebene"
+msgid "Name"
+msgstr "Name"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../raid.pm:1
#, c-format
-msgid "Network"
-msgstr "Netzwerk"
+msgid "mkraid failed"
+msgstr "mkraid schlug Fehl"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "Netzwerk & Internet"
+msgid "Button 3 Emulation"
+msgstr "Emulation der 3. Taste"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Graphical interface"
-msgstr "Grafikumgebung"
+msgid "Sending files..."
+msgstr "Dateien 眉bertragen ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Israeli (Phonetic)"
+msgstr "Israel (Phonetisch)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-Karte"
+msgid "access to rpm tools"
+msgstr "Zugriff auf RPM-Werkzeuge"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid "edit"
msgstr ""
-"Es wurde keine Soundkarte gefunden. Versuchen Sie 鈥瀐arddrake鈥 nach der "
-"Installation."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "You must choose/enter a printer/device!"
+msgstr "Sie m眉ssen einen Drucker w盲hlen/ein Ger盲t eingeben!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
msgstr ""
-"Starten Sie 鈥瀞ndconfig鈥 nach der Installation, um Ihre Soundkarte "
-"einzurichten."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Verf眉gen Sie 眉ber eine ISA soundkarte?"
+msgid "Phone number"
+msgstr "Telefonnummer"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Sound card"
-msgstr "Soundkarte"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Fehler: Es gibt keinen bekannten Treiber f眉r Ihre Soundkarte (%s)"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "CUPS-Server im Netzwerkbetrieb"
+msgid "Printer name, description, location"
+msgstr "Druckername, Beschreibung, Standort"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No printer"
-msgstr "Kein Drucker"
+msgid "USA (broadcast)"
+msgstr "USA (terrestrisch)"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer"
-msgstr "Drucker"
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr ""
+"Bitte w盲hlen Sie ein\n"
+"Sicherungsmedium."
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Maus"
+msgid "Use Xinerama extension"
+msgstr "Xinerama Erweiterung verwenden"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Zeitzone"
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Keyboard"
-msgstr "Tastatur"
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"Ich kann 鈥瀖kbootdisk鈥 nicht richtig beenden: \n"
+" %s \n"
+" %s"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Summary"
-msgstr "Zusammenfassung"
+msgid "West Europe"
+msgstr "Westeuropa"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Server"
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
+msgstr ""
+"[OPTIONEN] [PROGRAMMNAME]\n"
+"\n"
+"OPTIONEN:\n"
+" --help - Asgabe dieses Hilfetextes.\n"
+" --report - Name eines Mandrake Programms.\n"
+" --incident - Name eines Mandrake Programms."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
+msgid "Harddrake2 version %s"
+msgstr "HardDrake Version %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr liefert GMT"
+msgid "Copying %s"
+msgstr "Kopiere: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "W盲hlen Sie Ihre Zeitzone"
+msgid "Choose color"
+msgstr "Farbe einstellen"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "M枚chten Sie einen Drucker konfigurieren?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikanische Republik"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ich kann nicht forken: %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swaziland"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
+msgid "Set-UID"
msgstr ""
-"Verbindung mit dem Mirror aufbauen, um eine Liste verf眉gbarer Pakete zu "
-"erhalten."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte w盲hlen Sie einen Mirror, von dem Sie die Pakete holen wollen."
+msgid "Please check if you are using CDRW media"
+msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
-"verf眉gbarer Pakete zu erhalten."
+"Bitte w盲hlen Sie die Festplatte, die Sie l枚schen wollen, um Ihr neues\n"
+"Mandrake Linux zu installieren. Bedenken Sie dabei, dass alle Daten auf\n"
+"dieser Platte nach diesem Schritt unwiederbringlich verloren sind!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sie haben nun die M枚glichkeit Pakete zu installieren, die seit Erscheinen\n"
-"der Distribution aktualisiert wurden. Es handelt sich um \n"
-"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
-"\n"
-"Allerdings ben枚tigen Sie daf眉r eine funktionierende Internertverbindung.\n"
-"\n"
-"M枚chten Sie die Aktualisierungen vornehmen?"
+msgid " on parallel port \\#%s"
+msgstr " an Parallelport \\#%s"
-#: ../../install_steps_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
-"ein."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w聞hlen."
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
+msgid "Generic 2 Button Mouse"
+msgstr "Generische 2 Tasten Maus"
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Einstellungen f眉r nach der Installation"
+msgid "Remove the logical volumes first\n"
+msgstr "Entfernen Sie erst die Logischen Medien\n"
-#: ../../install_steps_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "In %d Sekunden wird das gew聞hlte BS automatisch gestartet."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Preparing installation"
-msgstr "Installation vorbereiten"
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
+msgstr "Ich kann 鈥/etc/sysconfig/bootsplash鈥 nicht anlegen."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM 鈥%s鈥"
+msgid "Internet access"
+msgstr "Internetzugang"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Falls Sie alle aufgef眉hrten CDs haben, w盲hlen Sie 鈥濷K鈥, \n"
-"falls Sie keine der aufgef眉hrten CDs haben, w盲hlen Sie 鈥濧bbruch鈥,\n"
-"falls nur einige der aufgef眉hrten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und w盲hlen Sie dann 鈥濷K鈥."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Alle"
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
+"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, bet盲tigen "
+"Sie bitte die Schaltfl盲che 鈥濴iste der Drucker-Optionen鈥."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Extrem minimale Installation (ohne 鈥瀠rpmi鈥)"
+msgid "Enabling servers..."
+msgstr "Server aktivieren ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
+msgid "Printing test page(s)..."
+msgstr "Druck der Testseite(n) ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "With X"
-msgstr "Mit X"
+msgid "There is already a partition with mount point %s\n"
+msgstr "Es gibt bereits eine Partition, mit dem Einh盲ngpunkt %s\n"
-#: ../../install_steps_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
-"Sie haben keine Paketgruppe ausgew盲hlt\n"
-"Bitte w盲hlen Sie die minimale Installation, die Sie w眉nschen."
+"Sie m眉ssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
+"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
+"Betriebssystem alles belegt, m眉ssen die Platte(n) neu partitioniert werden.\n"
+"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
+"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
+"werden kann.\n"
+"\n"
+"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
+"f眉r unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
+"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
+"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
+"Entscheidung.\n"
+"\n"
+"Abh盲ngig vom aktuellen Zustand Ihrer Platte(n) haben Sie verschiedene\n"
+"Alternativen:\n"
+"\n"
+" * 鈥%s鈥: Dies f眉hrt einfach dazu, dass Ihre leere(n) Festplatte(n)\n"
+"automatisch partitioniert werden; Sie m眉ssen sich also um nichts weiter\n"
+"k眉mmern.(*)\n"
+"\n"
+" * 鈥%s鈥: Der Assistent hat eine oder mehrere existierende Linux Partitionen\n"
+"auf Ihrer Platte gefunden. W盲hlen Sie diese Schaltfl盲che, falls Sie sie\n"
+"behalten wollen. Sie werden dann gebeten, die Einh盲ngpunkte der Partitionen\n"
+"anzugeben. Als Vorgabe erhalten Sie die Einh盲ngpunkte der gefundenen\n"
+"Distribution, normalerweise ist es nicht n枚tig diese zu 盲ndern.\n"
+"\n"
+" * 鈥%s鈥: Falls der gesamte Plattenplatz aktuell f眉r Microsoft Windows(TM)\n"
+"verschwendet ist, m眉ssen Sie f眉r GNU/Linux Platz schaffen. Um dies zu\n"
+"erreichen, k枚nnen Sie entweder Ihre Microsoft Windows(TM) Partition(en)\n"
+"samt Daten l枚schen (siehe 鈥濳omplette Platte l枚schen鈥) oder Ihre Windows\n"
+"Partition verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese\n"
+"Variante w盲hlen, falls Sie beide Betriebssysteme (Windows und Mandrake\n"
+"Linux) nebeneinander nutzen wollen.\n"
+"\n"
+" Bevor Sie sich f眉r diese Variante entscheiden, sei hier noch einmal\n"
+"betont, dass das bedeutet, Sie haben weniger Platz f眉r Windows als\n"
+"momentan.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie alle Daten Ihrer Platte verlieren, und sie durch Ihr\n"
+"neues Mandrake Linux System ersetzen wollen, w盲hlen Sie diese Schaltfl盲che.\n"
+"Beachten Sie, dass dieser Schritt nicht r眉ckg盲ngig gemacht werden kann.\n"
+"\n"
+" !! Wenn Sie diese Variante w盲hlen, werden alle Ihre Daten auf der Platte\n"
+"gel枚scht! !!\n"
+"\n"
+" * 鈥%s鈥: Bei dieser Variante werden alle Windows Partitionen gel枚scht und\n"
+"die Platte(n) komplett neu partitioniert.\n"
+"\n"
+" !! Wenn Sie diese Variante w盲hlen, werden alle Ihre Daten auf der Platte\n"
+"gel枚scht! !!\n"
+"\n"
+" * 鈥%s鈥: Wenn Sie Ihre Festplatte selber von Hand partitionieren wollen,\n"
+"dann k枚nnen Sie diese Option w盲hlen. Seien Sie bitte sehr sorgf盲ltig, wenn\n"
+"Sie diese L枚sung w盲hlen, da Sie zwar alle m枚glichen Einstellungen\n"
+"vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren k枚nnen. Diese\n"
+"Option ist nur geeignet, wenn Sie wissen, was Sie tun. Um zu erfahren, wie\n"
+"Sie DiskDrake verwenden k枚nnen, lesen Sie bitte das Kapitel 鈥濱hre\n"
+"Partitionen verwalten鈥 im 鈥濻tarter Handbuch鈥淺n"
+"\n"
+"(*) In Deutschland ist es quasi unm枚glich, Komplettrechner mit leeren\n"
+"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
+"d眉rfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
+"propriet盲re kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
+"dass es freie und sogar kostenlose Alternativen gibt. Jeder K盲ufer eines\n"
+"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
+"aus Redmond gleichgesetzt."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type of install"
-msgstr "Installationsklasse"
+msgid "Ukraine"
+msgstr "Ukraine"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Gew眉nschte Gr枚脽e 眉bersteigt den verf眉gbaren Platz"
+msgid "Application:"
+msgstr "Anwendung:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr ""
-"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
+msgid "External ISDN modem"
+msgstr "Externes ISDN Modem"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Laden von Diskette ..."
+msgid "if set to yes, report check result by mail."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Auswahl der Pakete"
+msgid "Your choice? (default %s) "
+msgstr "Ihre Wahl? (Standard 鈥%s鈥) "
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Auf Diskette speichern"
+msgid "Trouble shooting"
+msgstr "Fehlerbehandlung"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Load from floppy"
-msgstr "Von Diskette laden"
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "R茅union"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"Bitte w盲hlen Sie, ob die Paketauswahl von Diskette geladen \n"
-"oder darauf gespeichert werden soll. Es handelt sich um das \n"
-"selbe Format, wie die unter 鈥瀉uto_install鈥 erzeugten Disketten."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
msgstr ""
-"Es steht auf Ihrem System nicht gen眉gend Speicherplatz f眉r die \n"
-"Installation bzw. Aktualisierung zur Verf眉gung (%d > %d)."
+"Die Testseite(n) wurden an den Drucker gesandt.\n"
+"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
+"Druckstatus:\n"
+"%s\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Suche nach vorhandenen Paketen..."
+msgid "daily"
+msgstr "t盲glich"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Finden der zu aktualisierenden Pakete ..."
+msgid "and one unknown printer"
+msgstr "und ein unbekannter Drucker"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Suche nach bereits installierten Paketen ..."
+msgid "Ireland"
+msgstr "Irland"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Suche nach vorhandenen Paketen und aktualisieren der RPM-Datenbank ..."
+msgid "kernel version"
+msgstr "Kernversion"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu erm枚glichen! \n"
-"Bitte vergr枚脽ern Sie den Bereich."
+msgid " Restore Configuration "
+msgstr " Konfiguration wiederherstellen "
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Ist dies die richtige Einstellung?"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
msgstr ""
-"Es traten Fehler beim Kontrollieren des Dateisystems %s auf. Wollen Sie, "
-"dass ich versuche sie zu beheben? (Achtung: das kann zu Datenverlust f眉hren)"
+"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
+"verbinden wollen, dann bet盲tigen Sie die Schaltfl盲che 鈥%s鈥. Bitte schalten\n"
+"Sie jedoch zuvor, falls n枚tig, die daf眉r ben枚tigten Ger盲te ein, damit\n"
+"鈥濪rakX鈥 sie automatisch erkennen kann. Sollte die automatische Erkennung\n"
+"nicht korrekt erfolgen, k枚nnen Sie es erneut versuchen, nachdem Sie die\n"
+"Markierung der Option 鈥%s鈥 entfernt haben. Bet盲tigung der Schaltfl盲che 鈥%s鈥淺n"
+"bringt Sie weiter zum n盲chsten Installationsschritt ohne Ihr Netzwerk\n"
+"einzurichten.\n"
+"\n"
+"Zur Auswahl stehen folgende Verbindungsarten: Herk枚mmliches Modem, ISDN\n"
+"Modem, ADSL Verbindung, Kabelmodem oder eine einfache LAN Verbindung\n"
+"(Ethernet).\n"
+"\n"
+"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
+"sicher, dass Sie die n枚tigen Parameter von Ihrem Internet Provider oder\n"
+"Systemadministrator erhalten haben.\n"
+"\n"
+"Weitere Einzelheiten, die hier bereits hilfreich sein k枚nnen, erhalten Sie\n"
+"im 鈥濻tarter Handbuch鈥. Falls Sie unsicher sind, warten Sie ab, bis die\n"
+"Installation beendet ist und verwenden Sie danach das beschriebene\n"
+"Programm, um Ihre Verbindung einzurichten."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten Bl枚cken suchen?"
+msgid "Wizard Configuration"
+msgstr "Assistentengest眉tzte Konfiguration"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen ausw盲hlen"
+msgid "Autoprobe"
+msgstr "Automatische Erkennung"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie m眉ssen Ihren Rechner neu starten, um die 脛nderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
+msgid "Backup system files..."
+msgstr "Systemdateien sichern ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Can't use broadcast with no NIS domain"
msgstr ""
-"Sie haben keinen Platz f眉r die 1 MB gro脽e Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie m眉ssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
+"Ich kann kein Broadcast machen,\n"
+"da keine NIS Dom盲ne angegeben wurde"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "W盲hlen Sie die Einh盲ngpunkte"
+msgid "Removing printer \"%s\"..."
+msgstr "Drucker 鈥%s鈥 entfernen ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuchen der Partitionen, um die Einh盲ngpunkte zu finden."
+msgid "drakfloppy"
+msgstr "DrakFloppy"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "No partition available"
-msgstr "Keine Partition verf眉gbar"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Iformationsebene, die durch den Befehl CPUID erhalten werden kann."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid " on device: %s"
+msgstr " an Ger盲t: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA Karten konfigurieren ..."
+msgid "Remove Windows(TM)"
+msgstr "Windows(TM) l枚schen"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
+"damit XFree gestartet werden kann!"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"W盲hlen Sie eine Schriftdatei bzw. ein Verzeichnis und bet盲tigen Sie "
+"鈥濰inzuf眉gen鈥"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Bitte w盲hlen Sie den seriellen Anschluss, an dem Ihre Maus h盲ngt."
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "Maus Port"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Bitte w盲hlen Sie Ihren Maustyp."
+msgid "System"
+msgstr "System"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Schl眉ssel"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Do you want to use this feature?"
+msgstr "M枚chten Sie diese M枚glichkeit nutzen?"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Aktualisiere %s"
+msgid "Arabic"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr ""
+"\n"
+"- Optionen:\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Installation/Aktualisierung"
+msgid "Password required"
+msgstr "Passwort n枚tig"
-#: ../../install_steps_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hier die Liste aller Tastaturen"
+msgid "%d minutes"
+msgstr "%d Minuten"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Bitte w盲hlen Sie Ihren Tastaturtyp."
+msgid "Graphics card: %s"
+msgstr "Grafikkarte: %s"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Quit"
-msgstr "Verlassen"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Lizenz"
+msgid "XFree configuration"
+msgstr "XFree konfigurieren"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Es ist ein Fehler aufgetreten"
+msgid "Choose action"
+msgstr "W盲hlen Sie ein Aktion aus"
-#: ../../install_steps_newt.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr "Franz枚sisch Polinesien"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-" <Tab>/<Alt-Tab> n盲chstes Element | <Leertaste> ausw盲hlen | <F12> weiter "
+"鈥濪rakX鈥 versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
+"Sollte das nicht m枚glich sein, so behandelt es Ihre Maus als\n"
+"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt 眉blicherweise\n"
+"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
+"handelt.\n"
+"\n"
+"Sollte dies nicht Ihren Vorstellungen entsprechen: W盲hlen Sie einfach Ihren\n"
+"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
+"\n"
+"Sollten Sie einen anderen Maustyp gew盲hlt haben, als DrakX Ihnen vorschlug,\n"
+"k枚nnen Sie die Funktionst眉chtigkeit Ihrer Maus im angezeigten Dialog\n"
+"眉berpr眉fen. Verwenden Sie auch die Kn枚pfe und gegebenenfalls das Mausrad,\n"
+"um sicherzustellen, dass die festgelegten Einstellungen funktionieren.\n"
+"Falls nicht, dr眉cken Sie die [Leertaste] oder die Eingabetaste, um zur眉ck\n"
+"zum Auswahlmen眉 zu gelangen und suchen Sie einen anderen Treiber aus.\n"
+"\n"
+"Es kommt vor, dass M盲use mit R盲dern nicht korrekt erkannt werden. W盲hlen\n"
+"Sie in diesem Fall die richtige Maus aus der vorgegebenen Liste. Stellen\n"
+"Sie sicher, dass Sie auch den Anschluss richtig angegeben haben. Nach\n"
+"bet盲tigen der Schaltfl盲che 鈥%s鈥, wird Ihnen ein Bild der gew盲hlten Maus\n"
+"gezeigt. Bewegen Sie R盲der und Tasten, um sicherzustellen, dass die Maus\n"
+"richtig erkannt wurde."
-#: ../../install_steps_newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Unterst眉tzung f眉r den OKI 4w und kompatible WinDrucker."
-#: ../../install_steps.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Kein Disketten-Laufwerk verf眉gbar"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
-#: ../../install_steps.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen auf %s"
+msgid "Installing driver for %s card %s"
+msgstr "Installation des Treibers f眉r die Karte %s %s"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels 鈥瀝pm -qpl \n"
-"Mandrake/rpms/*.rpm鈥淺n"
+"Sie haben Ihren alten Standarddrucker (鈥%s鈥) 眉bertragen, soll es auch Ihr "
+"Standarddrucker unter dem neuen Drucksystem 鈥%s鈥 werden?"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den Einh盲ngpunkt %s kopieren"
+msgid "Enable Server"
+msgstr "Server aktivieren"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Ukrainian"
+msgstr "Ukraine"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"Es trat ein Fehler auf. Ich wei脽 jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie k枚nnen fortfahren, jedoch auf eigenes Risiko!"
+"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
+"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
+"und Ihre Softwareeinstellngen. Versuchen Sie anschlie脽end erneut den "
+"entfernten Drucker einzurichten."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Bitte warten"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ok"
-msgstr "OK"
+msgid "Local network(s)"
+msgstr "Lokale Netzwerke"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Windows(TM) l枚schen"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Finish"
-msgstr "Assistent beenden"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "USB-Controller"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"Nachdem Sie die allgemeinen BS-Starter Parameter eingestellt haben,\n"
+"bekommen Sie die Liste m枚glicher Betriebssystemalternativen f眉r das\n"
+"Startmen眉 gezeigt.\n"
+"\n"
+"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
+"so wird dieses - sofern es erkannt wird - automatisch zu dem Startmen眉\n"
+"hinzugef眉gt. Hier k枚nnen Sie noch einige Feineinstellungen f眉r die\n"
+"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
+"bet盲tigen Sie die Schaltfl盲che 鈥%s鈥, um ihn anzupassen oder zu l枚schen;\n"
+"鈥%s鈥 erzeugt einen neuen Eintrag und 鈥%s鈥 bringt Sie zum n盲chsten\n"
+"Installationsschritt.\n"
+"\n"
+"M枚glicherweise wollen Sie auch nicht, dass andere Anwender Zugriff auf die\n"
+"眉brigen installierten Betriebssysteme bekommen. In diesem Fall k枚nnen Sie\n"
+"die jeweiligen Eintr盲ge entfernen, Sie m眉ssen jedoch selbst f眉r\n"
+"Startdisketten sorgen, um diese Systeme erreichen zu k枚nnen!"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Basic"
-msgstr "Einfach"
+msgid "System mode"
+msgstr "System-Modus"
-#: ../../interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Fortgeschritten"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
+"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
+"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
+"notwendig, den entsprechenden Benutzernamen samt Passwort."
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove"
-msgstr "Entfernen"
+msgid "Netmask:"
+msgstr "Netzmaske:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Modify"
-msgstr "脛ndern"
+msgid "Append"
+msgstr "脺bergeben"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Hinzuf眉gen"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
-#: ../../interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "W盲hlen Sie eine Datei"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Hier k枚nnen Sie die Taste, bzw Tastenkombination w盲hlen, \n"
-"mit der Sie zwischen verschiedenen Tastaturbelegugen \n"
-"umschalten k枚nnen, etwa zwischen deutschem und US-Layout."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Rechte 鈥濿indows鈥-Taste"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"Die automatische Installation kann, falls Sie wollen,\n"
+"vollautomatisch erfolgen. In diesem Fall wird die\n"
+"Festplatte vollst盲ndig durch DrakX rekonfiguriert\n"
+"(diese M枚glichkeit ist f眉r die Replikation auf anderen\n"
+"Rechnern gedacht).\n"
+"\n"
+"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
+"Installation durchzuf眉hren.\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Linke 鈥濿indows鈥-Taste"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netzwerkdrucker 鈥%s鈥, Port %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "Men眉taste"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Bitte w盲hlen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
+"verbunden ist."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt und Umschalttaste gleichzeitig"
+msgid "OK to restore the other files."
+msgstr "OK, die 眉brigen Dateien zu aktualisieren."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Strg und Alt gleichzeitig"
+msgid "Please choose your keyboard layout."
+msgstr "Bitte w盲hlen Sie Ihren Tastaturtyp."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock Taste"
+msgid "Printer Device URI"
+msgstr "Druckeranschluss URI"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Strg und Umschalttaste gleichzeititg"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Umschalttasten gleichzeitig"
+msgid "Terminal-based"
+msgstr "Terminal-basiert"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "AltGr-Taste"
+msgid "Installing a printing system in the %s security level"
+msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
+msgid "The user name is too long"
+msgstr "Dieses Benutzerkennzeichen ist zu lang"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY (鈥瀗umber row鈥)"
+msgid "Other OS (windows...)"
+msgstr "Anderes Betriebssystem (Windows ...)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Vereinigte Staaten von Amerika"
+msgid "Reading printer database..."
+msgstr "Lesen der Drucker-Datenbank ..."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Gro脽britannien"
+msgid "Generate auto install floppy"
+msgstr "Erstellen einer Auto-Installationsdiskette"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukraine"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
+"\t\t Benutzer: %s\n"
+"\t\t Pfad: %s \n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "T眉rkei (modernes 鈥濹鈥 Modell)"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "T眉rkei (traditionelles 鈥濬鈥 Modell)"
+msgid "No open source driver"
+msgstr "Kein OpenSource Treiber"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tadschikistan"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Diese Ebene bietet die selbe Funktionalit盲t, wie die vorherige. Jedoch ist \n"
+"das System nun komplett geschlossen. Es ist die h枚chste Sicherheitsebene."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thail盲ndisch"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamilisch (Schreibmaschine)"
+msgid "New Caledonia"
+msgstr "Neukaledonien"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamilisch (TSCII Layout)"
+msgid "European protocol (EDSS1)"
+msgstr "Europ盲isches Protokoll (EDSS1)"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
+msgid "Video mode"
+msgstr "Video Modus"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
+msgid "Please enter your email address below "
+msgstr "Bitte geben Sie Ihre E-Mail-Adresse ein"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
+msgid "Oman"
+msgstr "Oman"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Slovenian"
-msgstr "Slowenien"
+msgid "Network Monitoring"
+msgstr "Netzwerk眉berwachung"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Schweden"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russland (YaWERTY)"
+msgid "New size in MB: "
+msgstr "Neue Gr枚脽e in MB:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Russland"
+msgid "Partition table type: %s\n"
+msgstr "Partitionstabellen Typ: %s\n"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rum盲nien (QWERTY)"
+msgid "Authentication Windows Domain"
+msgstr "Windows Dom盲nenauthentifizierung"
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rum盲nien (QWERTZ)"
+msgid "US keyboard"
+msgstr "Vereinigte Staaten von Amerika"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Qu茅bec)"
+msgid "Buttons emulation"
+msgstr "Tastenemulation"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugal"
+msgid ", network printer \"%s\", port %s"
+msgstr ", Netzwerkdrucker 鈥%s鈥, Port %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" FTP Verbindungsproblem: Es war nicht m枚glich, Ihre Dateien per FTP zu "
+"眉bertragen.\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Norwegian"
-msgstr "Norwegen"
+msgid "Sending Speed:"
+msgstr "Sendegeschwindigkeit: "
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Dutch"
-msgstr "Niederlande"
+msgid "Halt bug"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malta (USA)"
+msgid "Mail alert configuration"
+msgstr "Mail Benachrichtigungskonfiguration"
-#: ../../keyboard.pm:1
+# drakfw:278 (Neuse
+#: ../../lang.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malta (GB)"
+msgid "Tokelau"
+msgstr "Tokelau (Neuseeland)"
#: ../../keyboard.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolei (Kyrillisches Layout)"
+msgid "Bosnian"
+msgstr "Bosnien"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmesien)"
+msgid "Release: "
+msgstr "Ausgabe:"
-#: ../../keyboard.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Macedonian"
-msgstr "Mazedonien"
+msgid "Connection speed"
+msgstr "Verbindungsgeschwindigkeit"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"Bitte geben Sie den Ger盲tenamen \n"
+"Ihres Brenners an, etwa 鈥0,1,0鈥."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Lettland"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
+msgid "Database Server"
+msgstr "Datenbankserver"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - 鈥瀗umber row鈥)"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzuf眉gen"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
+"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
+"ZUM STEHENBLEIBEN IHRES RECHNERS F脺HREN. Ihre Karte wird auch von \n"
+"XFree %s unterst眉tzt, wodurch Sie bessere 2D-Unterst眉tzung erhalten \n"
+"k枚nnen."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Laotian"
-msgstr "Laos"
+msgid "Please wait, setting security options..."
+msgstr "Bitte warten, Sicherheitsoptionen werden eingestellt..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Lateinamerika"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Unbekannt|CPH05X (bt878) [Zahlreiche Hersteller]"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korea"
+msgid "Launch the graphical environment when your system starts"
+msgstr "X-Window nach dem Hochfahren automatisch starten "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
+msgid "hourly"
+msgstr "st眉ndlich"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Inuktitut"
-msgstr "Gr枚nland (Inuktitut)"
+msgid " Successfuly Restored on %s "
+msgstr " erfolgreich auf %s wiederhergestellt "
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italien"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Island"
+msgid "Antigua and Barbuda"
+msgstr "Antigua und Barbuda"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iran"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
#: ../../keyboard.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Phonetisch)"
+msgid "Spanish"
+msgstr "Spanien"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israel"
+msgid "Start"
+msgstr "Start"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Kroatien"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Ungarn"
+msgid "Configuring applications..."
+msgstr "Anwendungen konfigurieren ..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Indien (Gurmukhi)"
+msgid "Normal modem connection"
+msgstr "Normale Modem Verbindung"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Gujarati"
-msgstr "Indien (Gujarati)"
+msgid "File Selection"
+msgstr "Dateiauswahl"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Greek"
-msgstr "Griechenland"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Welche ISDN Konfiguration wollen Sie durchf眉hren?\n"
+"\n"
+"* Die alte Konfiguration verwendet 鈥瀒sdn4net鈥. Sie \n"
+" enth盲llt m盲chtigere Werkzeuge, ist jedoch komplizierter \n"
+" einzurichten und nicht voll standardkonform.\n"
+"\n"
+"* Die neue Konfiguration mit 鈥瀒sdn-light鈥 ist \n"
+" verst盲ndlicher und standardkonformer, sie enth盲llt \n"
+" jedoch weniger Werkzeuge.\n"
+"\n"
+"Wir empfehlen die 鈥瀒sdn-light鈥 Variante.\n"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
+msgid "Run config tool"
+msgstr "Konfigurationswerkzeug starten"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French"
-msgstr "Frankreich"
+msgid "Bootloader installation"
+msgstr "Installation des Betriebssystemstarters"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finnland"
+msgid "Root partition size in MB: "
+msgstr "Gr枚脽e der Verzeichnisbaumwurzel-Partition in MB: "
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Spanien"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Dieses Paket ist existenziell, sie k枚nnen es nicht deselektieren"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estland"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Schweden)"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"Der Dienst named (BIND) stellt ihnen einen Server zur Verf眉gung, \n"
+"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
+"Ein solcher Dienst wird 鈥濪omain Name Server鈥 (DNS) genannt. \n"
+"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
+"Netz gehen, ben枚tigen Sie diesen Dienst nicht."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
+msgid "Disconnect..."
+msgstr "Trenne Verbindung ..."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
+msgid "Saint Lucia"
+msgstr "St. Lucia"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Danish"
-msgstr "D盲nemark"
+msgid "Report"
+msgstr "Report"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Palau"
+msgstr "Palau"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Deutschland (ohne Akzenttasten)"
+msgid "level"
+msgstr "Level"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "German"
-msgstr "Deutschland"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Alle Vorf盲lle werden werden von einem einzelnen qualifizierten MandrakeSoft "
+"Experten bearbeitet."
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
+msgid "Package Group Selection"
+msgstr "Auswahl der Paketgruppen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Wiederherstellen mit Netzwerkprotokoll: %s"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Schweiz (franz枚sisches Layout)"
+msgid "You can configure each parameter of the module here."
+msgstr "Sie k枚nnen alle Modulparamerter hier einstellen."
-#: ../../keyboard.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
+msgid "Choose the resolution and the color depth"
+msgstr "W盲hlen Sie bitte Aufl枚sung und Farbtiefe"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Belarusian"
-msgstr "Wei脽russland"
+msgid "Emulate third button?"
+msgstr "Die dritte Maustaste emulieren?"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnien"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Sie k枚nnen keine weiteren Partitionen anlegen (da Sie die maximale \n"
+"Anzahl prim盲rer Partitionen erstellt haben). Bitte l枚schen Sie \n"
+"eine prim盲re Partioion und legen Sie stattdessen eine erweiterte \n"
+"Partition an."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
+msgid "Mount"
+msgstr "Einh盲ngen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarien (BDS)"
+msgid "Creating auto install floppy"
+msgstr "Erstellen einer Auto-Installationsdiskette"
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarien (Phonetisch)"
+msgid "Install updates"
+msgstr "Aktualisierungen installieren"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Bengali"
-msgstr "Bangladesh"
+msgid "text box height"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgien"
+msgid "State"
+msgstr "Status"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
+msgid "Be sure a media is present for the device %s"
+msgstr "Stellen Sie sicher, dass ein Medium in Laufwerk %s liegt."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Arabic"
+msgid "Enable multiple profiles"
+msgstr "Mehrere Profile einschalten"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
+"Diese Optionen k枚n alle Ihre Dateien im Verzeichnis 鈥/etc鈥 sichern und "
+"wiederherstellen\n"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
+msgid "Local printer"
+msgstr "Lokaler Drucker"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
+msgid "Files Restored..."
+msgstr "Dateien wiederhergestellt..."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenien (alt)"
+msgid "Package selection"
+msgstr "Auswahl der Pakete"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albanien"
+msgid "Mauritania"
+msgstr "Mauretanien"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Polish"
-msgstr "Polen"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
+"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
+"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
+"weder neukonfigurieren, noch Ihre DHCP-Konfiguration 盲ndern.\n"
+"\n"
+"Ihr standardm盲脽iger DNS Eintrag ist der Caching Nameserver Ihrer Firewall. "
+"Sie k枚nnen diesen etwa durch den DNS Server Ihres Internetanbieters "
+"ersetzen.\n"
+"\n"
+"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
+"Server f眉r Sie aufsetzen.\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzuf眉gen geben Sie "
+"einfach einen Ger盲te- oder Dateinamen in der Eingabezeile an (Parallele "
+"Anschl眉sse: /dev/lp0, /dev/lp1, ..., 盲quivalent zu LPT1:, LPT2:, ...; Erster "
+"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Simbabwe"
+msgid "All primary partitions are used"
+msgstr "Alle Prim盲rpartitionen sind in Gebrauch"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Sambia"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfl盲che\n"
+"neu zu starten, um Probleme, die durch die 脛nderung des\n"
+"Rechnernamens hervorgerufen werden, zu vermeiden."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../services.pm:1
#, c-format
-msgid "South Africa"
-msgstr "S眉dafrika"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
+"Automatische Erkennung und Konfiguration neuer Hardware w盲hrend des \n"
+"Betriebssystemstarts."
-#: ../../lang.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Serbia"
-msgstr "Serbien"
+msgid "Installation Server Configuration"
+msgstr "Konfiguration des Installations-Servers"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte (Frankreich)"
+msgid "Configuring IDE"
+msgstr "IDE konfigurieren"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Network functionality not configured"
+msgstr "Ihr Netzwerk ist nicht konfiguriert"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "Configure module"
+msgstr "Modul konfigurieren"
#: ../../lang.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis und Futuna"
+msgid "Cocos (Keeling) Islands"
+msgstr "Cocos (Keeling) Inseln"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Disconnecting from the Internet "
+msgstr "Vom Internet trennen"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "You'll need to reboot before the modification can take place"
+msgstr ""
+"Sie m眉ssen Ihren Rechner neu starten, damit die Ver盲nderungen wirksam werden"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jungfern-Inseln (U.S.)"
+msgid "Provider phone number"
+msgstr "Telefonnummer des Providers"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jungferninseln (britisch)"
+msgid "Host %s"
+msgstr "Rechner %s"
#: ../../lang.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "Armenia"
+msgstr "Armenien"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "St. Vincent und die Grenadinen"
+msgid "Fiji"
+msgstr "Fidschi"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Usbekistan"
+msgid "Second floppy drive"
+msgstr "zweite Disketten-Laufwerk"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "About Harddrake"
+msgstr "脺ber HardDrake"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
+msgid "Drive capacity"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Legen Sie eine Diskette in das Laufwerk\n"
+"Alle Daten auf dieser Diskette werden gel枚scht!"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
+msgid "Size: %s"
+msgstr "Gr枚脽e: %s"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tansania"
+msgid "Control and Shift keys simultaneously"
+msgstr "Strg und Umschalttaste gleichzeititg"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "secondary"
+msgstr "Sekund盲r"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "View Backup Configuration."
+msgstr "Sicherungskonfiguration anzeiegen"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad und Tobago"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../lang.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Turkey"
-msgstr "T眉rkei"
+msgid "No password"
+msgstr "Kein Passwort"
#: ../../lang.pm:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunesien"
+msgid "There is no existing partition to use"
+msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"Die folgenden Scanner\n"
+"\n"
+"%s\n"
+"sind direkt an Ihr System angeschlossen.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Ost Timor"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Um einen TCP- oder Socket-Drucker verwenden zu k枚nnen, m眉ssen Sie auf alle "
+"F盲lle dessen Rechnernamen, bzw. IP-Adresse - m枚glicherweise auch den Port - "
+"angeben. Bei HP JetDirect Servern ist dies normalerweise die Port-Adresse "
+"9100, bei anderen Servern kann es eine andere sein. Schauen Sie im "
+"Zweifelsfall in die Unterlagen des Herstellers."
-# drakfw:278 (Neuse
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau (Neuseeland)"
+msgid "Hard drive information"
+msgstr "Festplatten-Informationen"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tadschikistan"
+msgid "Russian"
+msgstr "Russland"
#: ../../lang.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Thailand"
+msgid "Jordan"
+msgstr "Jordanien"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "Hide files"
+msgstr "Dateien verstecken"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Selbsterkennung von direkt am Rechner angeschlossenen Druckern"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Chad"
-msgstr "Tschad"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks und Caicos Inseln"
+msgid "Sorry, no floppy drive available"
+msgstr "Ich kann kein Laufwerk finden"
#: ../../lang.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Bolivia"
+msgstr "Bolivien"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syrien"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Richten Sie Ihren Windows-Server so ein, dass Ihr Drucker 眉ber das IPP-"
+"Protokoll erreichbar ist und konfigurieren sie ihn auf dieser Maschine mit "
+"dem Verbindungstyp 鈥%s鈥 in Printerdrake.\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Bad package"
+msgstr "Ung眉ltiges Paket"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome und Principe"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
+"leistungsf盲higen Server: Web, E-Mail, Firewall, Router, Datei- und "
+"Druckserver, ..."
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec Grundeinstellungen"
-#: ../../lang.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Romania"
+msgstr "Rum盲nien"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "choose device"
+msgstr "Ger盲t w盲hlen"
#: ../../lang.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slowakei"
+msgid "Remove from LVM"
+msgstr "L枚schen aus dem LVM"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen Islands (Norwegen)"
+msgid "Timezone"
+msgstr "Zeitzone"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slowenien"
+msgid "German"
+msgstr "Deutschland"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sankt Helena"
+msgid "Next ->"
+msgstr "Weiter ->"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Es handelt sich mit gro脽er\n"
+"Wahrscheinlichkeit um eine\n"
+"Treiber-Partition. Sie sollten\n"
+"sie daher besser unver盲ndert\n"
+"lassen.\n"
#: ../../lang.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychellen"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon-Inseln"
+msgid "Horizontal refresh rate"
+msgstr "Horizontale Wiederholfrequenz"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabien"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Ich kann diesen Einh盲ngpunkt nicht zur眉cksetzen, da diese Partition als \n"
+"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Das von Ihnen w盲hrend der Installation eingerichtete Netzwerk kann jetzt "
+"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
+"Verf眉gung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
+"Kontrollzentrum unter 鈥濶etzwerk & Internet/Verbindung鈥. Versuchen Sie "
+"anschlie脽end erneut den Drucker mittels 鈥濰ardware/Drucker鈥渋m Kontrollzentrum "
+"einzurichten."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Russia"
-msgstr "Russland"
+msgid "USB controllers"
+msgstr "USB-Controller"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rum盲nien"
+msgid "What norm is your TV using?"
+msgstr "Um welche Fernsehnorm handelt es sich?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Reunion"
-msgstr "R茅union"
+msgid "Type:"
+msgstr "Typ:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Quatar"
+msgid "Share name"
+msgstr "Freigabename"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "enable"
+msgstr "aktivieren"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
+"verf眉gbarer Pakete zu erhalten."
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palestine"
-msgstr "Pal盲stina"
+msgid "Remove the loopback file?"
+msgstr "Die Loopback-Datei entfernen?"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Selected size is larger than available space"
+msgstr "Gew眉nschte Gr枚脽e 眉bersteigt den verf眉gbaren Platz"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid "NCP server name missing!"
+msgstr "Der NCP Servername fehlt!"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "St. Pierre und Miquelon"
+msgid "Please choose your country."
+msgstr "Bitte w盲hlen Sie Ihren Staat."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Poland"
-msgstr "Polen"
+msgid "Hard Disk Backup files..."
+msgstr "Backup-Dateien auf der Festplatte ..."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Laotian"
+msgstr "Laos"
#: ../../lang.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Philippinen"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua-Neuguinea"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Der Dienst rstat erm枚glicht es Anwendern anderer Rechner des \n"
+"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "French Polynesia"
-msgstr "Franz枚sisch Polinesien"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Scanner"
+msgstr "Scanner"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
+"鈥-鈥 und 鈥瀇鈥 bestehen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "New Zealand"
-msgstr "Neuseeland"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Welcome To Crackers"
+msgstr "Cracker-Spielplatz"
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "Module options:"
+msgstr "Modul-Optionen:"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "Go on without configuring the network"
+msgstr "Weiter ohne Netzwerkkonfiguration"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "Abort"
+msgstr "Abbruch"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkinsel"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Geben Sie an, ob sie das nicht-zur眉ckspulende Ger盲t verwenden wollen."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "New Caledonia"
-msgstr "Neukaledonien"
+msgid "Usage of remote scanners"
+msgstr "Scanner an anderen Rechnern nutzen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "\t-CDROM.\n"
+msgstr "\t- CD-ROM.\n"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
+"Starten Sie bitte erst 鈥瀌efrag鈥 unter Windows."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norwegen)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
+msgid "Hard Disk Backup Progress..."
+msgstr "Festplattenbackup in Bearbeitung ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Unable to fork: %s"
+msgstr "Ich kann nicht forken: %s"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Malediven"
+msgid "Type: "
+msgstr "Typ:"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "<-- Edit Client"
+msgstr "<-- Client bearbeiten"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "no fonts found"
+msgstr "Keine Schriften gefunden"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "Mouse"
+msgstr "Maus"
-#: ../../lang.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauretanien"
+msgid "not enough room in /boot"
+msgstr "Sie haben nicht genug Platz in 鈥/boot鈥"
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "N枚rdliche Mariannen-Inseln"
+msgid "Host name"
+msgstr "Rechnername"
#: ../../lang.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolei"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar"
-msgstr "Burma"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Suppress Fonts Files"
+msgstr "Schriftdateien l枚schen"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "Mazedonien"
+msgid "Add to RAID"
+msgstr "Zum RAID hinzuf眉gen"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Sie k枚nnen weitere yaboot Eintr盲ge angeben, etwa f眉r andere\n"
+"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
+"\n"
+"F眉r ein anderes BS k枚nnen Sie nur einen Namen und die Start-Partition\n"
+"angeben.\n"
+"\n"
+"F眉r Linux gibt es einige Parameter:\n"
+"\n"
+" * 鈥%s鈥: Es handelt sich um den Namen, den Sie an der yaboot\n"
+"Eingabeaufforderung angeben m眉ssen, um diese Alternative zu w盲hlen.\n"
+"\n"
+" * 鈥%s鈥: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
+"handelt es sich um 鈥瀡mlinuz鈥 oder eine Variante von 鈥瀡mlinuz鈥 mit einer\n"
+"Versionsnummer.\n"
+"\n"
+" * 鈥%s鈥: Die Verzeichnisbaumwurzel 鈥/鈥 Ihrer Linux Installation.\n"
+"\n"
+" * 鈥%s鈥: Auf Apple Hardware, wird die 脺bergabem枚glichkeit weiterer\n"
+"Kernparameter h盲ufig verwendet, um die Grafikausgabe richtig zu\n"
+"konfigurieren oder die Tastaturemulation der Mauskn枚pfe einzuschalten, da\n"
+"klassische Apple-M盲use von Hause aus mit 2 fehlenden Maustasten\n"
+"ausgeliefert werden. Hier einige Beispiele:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * 鈥%s鈥: Dieser Parameter kann entweder verwendet werden, um beim\n"
+"Betriebssystemstart bereits zus盲tzliche Kern-Module zur Verf眉gung zu haben,\n"
+"ohne dass das Start-Ger盲t zur Verf眉gung steht oder um ein RamDisk Abbild\n"
+"f眉r den BS-Start in Notf盲llen zur Verf眉gung zu haben.\n"
+"\n"
+" * 鈥%s鈥: Standardm盲脽ig ist eine RamDisk 4096 Bytes gro脽. Sollten Sie eine\n"
+"gr枚脽ere RamDisk ben枚tigen, k枚nnen Sie das mit diesem Parameter einstellen.\n"
+"\n"
+" * 鈥%s鈥: Normalerweise wird die Verzeichnisbaumwurzel zuerst im\n"
+"Nur-Lese-Modus eingeh盲ngt, um eine Dateisystem-Verifikation durchf眉hren zu\n"
+"k枚nnen, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
+"k枚nnen Sie hier abstellen.\n"
+"\n"
+" * 鈥%s鈥: Sollte sich die Apple Grafik-Hardware als extrem problematisch\n"
+"erweisen, k枚nnen Sie diesen Parameter verwenden um im sog. 鈥瀗ovideo鈥-Modus,\n"
+"also im FrameBuffer-Modus zu starten.\n"
+"\n"
+" * 鈥%s鈥: W盲hlt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
+"Dr眉cken von Enter an der yaboot Eingabeaufforderung gestartet bekommen.\n"
+"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung dr眉cken, erhalten Sie\n"
+"eine Liste der verf眉gbaren Alternativen. Der Standardeintrag wird mit einem\n"
+"Stern 鈥*鈥 markiert."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Inseln"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Der Drucker 鈥%s鈥 wurde erfogrich zu StarOffice/OpenOffice.org/GIMP "
+"hinzugef眉gt."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "No floppy drive available!"
+msgstr "Kein Disketten-Laufwerk verf眉gbar!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
+"die unten angegebene Liste oder bet盲tigen Sie die Schaltfl盲che 鈥濴iste der "
+"Drucker-Optionen鈥. %s%s\n"
+"\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldawien"
+msgid "Continue anyway?"
+msgstr "Wollen Sie trotzdem fortfahren?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Falls Ihr Drucker nicht aufgef眉hrt ist w盲hlen Sie bitte ein kompatibles bzw "
+"盲hnliches Modell (F眉r Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Morocco"
-msgstr "Marokko"
+msgid "Printer"
+msgstr "Drucker"
#: ../../lang.pm:1
#, c-format
-msgid "Libya"
-msgstr "Lybien"
+msgid "Saudi Arabia"
+msgstr "Saudi Arabien"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Litauen"
+msgid "Internet"
+msgstr "Internet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Some devices were added:\n"
+msgstr "Einige Ger盲te wurden hinzugef眉gt:\n"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litauen"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s Zylinder, %s K枚pfe, %s Sektoren\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Printing on the printer \"%s\""
+msgstr "Drucken auf Drucker 鈥%s鈥"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "Restore From Tape"
+msgstr "Von Band wiederherstellen"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid "Choose the profile to configure"
+msgstr "W盲hlen Sie das Profil, dass eingestellt werden soll"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "St. Lucia"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "Backup Now from configuration file"
+msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"Einh盲ngpunkte sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kasachstan"
+msgid "Restarting printing system..."
+msgstr "Drucksystem neu starten ..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman-Inseln"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "See hardware info"
+msgstr "Hardware Informationen anzeigen"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid "First sector of boot partition"
+msgstr "Erster Sektor der Boot-Partition"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid "Printer manufacturer, model"
+msgstr "Druckerproduzent, Modell"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : MTS einschalten\n"
+"--disable : MTS ausschalten\n"
+"--start : MTS starten\n"
+"--stop : MTS anhalten\n"
+"--adduser : einen existierenden Systemnutzer zu MTS hinzuf眉gen "
+"(ben枚tigt Nutzernamen)\n"
+"--deluser : einen existierenden Systemnutzer von MTS l枚schen "
+"(ben枚tigt Nutzernamen)\n"
+"--addclient : einen Client zu MTS hinzuf眉gen (ben枚tigt MAC Adresse, IP, "
+"NBI Image Name)\n"
+"--delclient : einen Client von MTS l枚schen (ben枚tigt MAC Adresse, IP, "
+"NBI Image Name)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "St. Kitts und Nevis"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Comoros"
-msgstr "Komoren"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Installation des LILO- und Start-Themas erfolgreich."
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
+"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
+"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
+"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
+"Synchronisationsrate ausw盲hlen, da Sie sonst Ihren Monitor besch盲digen \n"
+"k枚nnten. Im Zweifelsfall w盲hlen Sie bitte eine konservativere \n"
+"Einstellung."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambodscha"
+msgid "Modify"
+msgstr "脛ndern"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgisistan"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Die Befehle 鈥%s鈥 und 鈥%s鈥 erlauben es Ihnen ebenfals die Optionen eines "
+"spezeiellen Druckjobs zu konfigurieren. F眉gen Sie einfach die gew眉nschten "
+"Einstellungen in der Kommandozeile ein, etwa 鈥%s <Datei>鈥.\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kenya"
-msgstr "Kenia"
+msgid "Need hostname, username and password!"
+msgstr "Brauche Rechnername, Nutzername und Passwort!"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japan"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV ist ein Protokoll, dass es Ihnen erlaubt, Webserver-Verzeichnisse\n"
+"einzuh盲ngen, sodass Sie diese wie bei lokalen Dateisystemen verwenden\n"
+"k枚nnen (sofern der Webserver als WebDAV-Server eingerichtet wurde). \n"
+"Falls Sie Einh盲ngpunkte f眉r WebDAV hinzuf眉gen wollen, w盲hlen Sie\n"
+"鈥濶eu鈥."
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Jordan"
-msgstr "Jordanien"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
+msgid "new"
+msgstr "Neu"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "M枚chten Sie einen Drucker konfigurieren?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Wizard"
+msgstr "Assistent"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid "Edit selected server"
+msgstr "脛nderung des markierten Servers"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Please choose where you want to backup"
+msgstr "Bitte w盲hlen Sie wohin Sie die Sicherungskopien machen wollen."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britisches Territorium im Indischen Ozean"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Sie m眉ssen Ihren Rechner neu starten, um die 脛nderungen \n"
+"der Partitionstabelle wirksam werden zu lassen."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "India"
-msgstr "Indien"
+msgid "Do not include the browser cache"
+msgstr "Die Browser-Caches nicht archivieren."
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Please, choose your keyboard layout."
+msgstr "Bitte w盲hlen Sie Ihren Tastaturtyp."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irland"
+msgid "Standard"
+msgstr "Standard"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesien"
+msgid "Please choose your mouse type."
+msgstr "Bitte w盲hlen Sie Ihren Maustyp."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Hungary"
-msgstr "Ungarn"
+msgid "Connect..."
+msgstr "Verbinden ..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Konnte Drucker \"%s\" nicht konfigurieren!"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatien"
+msgid "not configured"
+msgstr "Nicht eingerichtet"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "ISA / PCMCIA"
+msgstr "ISA/PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard Island und McDonald Island"
+msgid "About"
+msgstr "脺ber"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Proxies configuration"
+msgstr "Proxies einstellen"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "China"
-msgstr "China"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "Start: sector %s\n"
+msgstr "Anfang: Sektor %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "Network interface already configured"
+msgstr "Ihr Netzwerk ist bereits konfiguriert"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Couldn't access the floppy!"
+msgstr "Kein Diskettenzugriff m枚glich!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia und die South Sandwich Islands"
+msgid "Mail Server"
+msgstr "E-Mailserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "脛quatorial-Guinea"
+msgid "Please click on a partition"
+msgstr "Bitte klicken Sie auf eine Partition"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Gouadeloupe"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Have a nice day!"
+msgstr "Bis bald!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "across Network"
+msgstr "眉ber Netzwerk"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Gr枚nland"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Upgrade %s"
+msgstr "Aktualisiere %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Select Printer Connection"
+msgstr "W盲hlen Sie die Drucker-Anbindung"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "French Guiana"
-msgstr "Franz枚sisch Guiana"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Sendersuche ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgia"
-msgstr "Georgien"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Fehler bei der 脺ertragung via FTP.\n"
+" Bitte korrigieren Sie Ihre FTP-Konfiguration."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Gro脽britannien"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
+"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
+"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
+"Datei 鈥/etc/inetd.conf鈥 freigeschaltet sind. \n"
+"Schalten Sie diesen Dienst ab, k枚nnen Sie keine der von inetd \n"
+"verwalteten Dienste mehr zugreifen."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gabon"
-msgstr "Gabun"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Far枚ische Inseln"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- via %s auf Rechner %s sichern\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronesien"
+msgid "Argentina"
+msgstr "Argentinien"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Inseln"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fidschi"
+msgid "Domain Name Server"
+msgstr "Dom盲nen-Namenserver (DNS)"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Finland"
-msgstr "Finnland"
+msgid "Security Level:"
+msgstr "Sicherheitsebene:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "脛thiopien"
+msgid "Mount points must begin with a leading /"
+msgstr "Einh盲ngpunkte m眉ssen mit einem / beginnen."
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Spain"
-msgstr "Spanien"
+msgid "Postfix Mail Server"
+msgstr "Postfix E-Mail-Server"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Quit without saving"
+msgstr "Beenden ohne speichern"
#: ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Westsahara"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Egypt"
-msgstr "脛gypten"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Sie erhalten das Produkt in unserem WebShop: MadrakeStore."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Estonia"
-msgstr "Estland"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Bitte geben Sie die Maximalgr枚脽e \n"
+"f眉r DrakBackup an."
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Es gibt zahlreiche Auswahlm枚glichkeiten (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Algeria"
-msgstr "Algerien"
+msgid "Hard drive detection"
+msgstr "Festplatten suchen"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanische Republik"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Sie haben keine Paketgruppe ausgew盲hlt\n"
+"Bitte w盲hlen Sie die minimale Installation, die Sie w眉nschen."
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominikanische Republik"
+msgid "Please enter the WebDAV server URL"
+msgstr "Bitte geben Sie die WebDAV-Server URL an"
#: ../../lang.pm:1
#, c-format
-msgid "Denmark"
-msgstr "D盲nemark"
+msgid "Tajikistan"
+msgstr "Tadschikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Accept"
+msgstr "Akzeptieren"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Cyprus"
-msgstr "Zypern"
+msgid "Description"
+msgstr "Beschreibung"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Osterinsel"
+msgid "Error opening %s for writing: %s"
+msgstr "Fehler beim 脰ffnen von %s zum Schreiben: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
+msgid "Mouse type: %s\n"
+msgstr "Maustyp: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Colombia"
-msgstr "Kolumbien"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Bitte w盲hlen Sie die Gr枚脽e des CD/DVD Mediums (MByte)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid "Expert Area"
+msgstr "Experten Bereich"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook-Inseln"
+msgid "Choose a monitor"
+msgstr "W盲hlen Sie Ihren Monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Elfenbeink眉ste"
+msgid "Empty label not allowed"
+msgstr "Leere Eintr盲ge sind nicht erlaubt"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Schweiz"
+msgid "Maltese (UK)"
+msgstr "Malta (GB)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid "I can't add any more partition"
+msgstr "Ich kann keinen weiteren Partitionen hinzuf眉gen"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Zentralafrikanische Republik"
+msgid "Size in MB: "
+msgstr "Gr枚脽e in MB:"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "Remote printer"
+msgstr "Entfernter Drucker"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos (Keeling) Inseln"
+msgid "Please choose a language to use."
+msgstr "Bitte w盲hlen Sie die zu verwendende Sprache."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"WARNUNG: Dieses Ger盲t wurde bereits zum Herstellen einer Internetverbindung "
+"konfiguriert.\n"
+"Dr眉cken Sie einfach 鈥濷K鈥, um die Einstellungen zu behalten.\n"
+"Fall Sie Felder ver盲ndern, wird die Konfiguration 眉berschrieben."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Ich kann Ihren Computer so einrichten, dass ein Benutzer automatisch "
+"angemeldet wird."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Belarus"
-msgstr "Wei脽russland"
+msgid "Floppy format"
+msgstr "Diskettenformat"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet-Insel"
+msgid "Generic Printers"
+msgstr "Generische Drucker"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Bitte w盲hlen Sie den Drucker, an den die Druckauftr盲ge gehen sollen oder "
+"geben Sie einen Ger盲te- oder Dateinamen in der Eingabezeile an."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The scanners on this machine are available to other computers"
+msgstr "Die Drucker dieses Rechners sind f眉r andere Rechner nutzbar"
+
+#: ../../any.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid "First sector of the root partition"
+msgstr "Erster Sektor der Verzeichnisbaumwurzel"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Brazil"
-msgstr "Brasilien"
+msgid "Alternative drivers"
+msgstr "Alternative Treiber"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivien"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Bitte w盲hlen Sie alle ben枚tigten Parameter.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei "
+msgid "Initrd"
+msgstr "Init-RamDisk"
#: ../../lang.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "Cape Verde"
+msgstr "Kap Verde"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Angabe, ob der Prozessor den Cyrix 6x86 Coma-Fehler aufweist."
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Bitte w盲hlen Sie den Anschluss, an dem der Drucker h盲ngt oder geben Sie "
+"einen Ger盲te- oder Dateinamen in der Eingabezeile an."
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarien"
+msgid "/Options/Test"
+msgstr "/Optionen/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
+"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
+"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
+"da Angreifer mangels Passwort an Ihre Daten gelangen k枚nnen!"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesch"
+msgid "Mounting partition %s"
+msgstr "Partition 鈥%s鈥 einh盲ngen"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "User name"
+msgstr "Benutzerkennzeichen"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnien-Herzegovina"
+msgid "New configuration (isdn-light)"
+msgstr "Neue Konfiguration (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbaidschan"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australia"
-msgstr "Australien"
+msgid "Backup system"
+msgstr "System sichern"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa"
+msgid "Test pages"
+msgstr "Testseiten"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Argentina"
-msgstr "Argentinien"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Liste der wiederherzustellenden Daten:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
+msgid "Checking %s"
+msgstr "Kontrolliere von %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "TCP/Socket Printer Options"
+msgstr "Optionen f眉r TCP/Socket-Drucker"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Niederl盲ndische Antillen"
+msgid "Card mem (DMA)"
+msgstr "Karten Mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenien"
+msgid "France"
+msgstr "Frankreich"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Albania"
-msgstr "Albanien"
+msgid "browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Checking installed software..."
+msgstr "Suche nach installierter Software"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua und Barbuda"
+msgid "Remote printer name missing!"
+msgstr "Der Name des entfernten Druckers fehlt!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Vereinigte arabische Emirate"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Wollen Sie Drucker im lokalen Netzwerk zum Drucken konfigurieren?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Turkey"
+msgstr "T眉rkei"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Number of buttons"
+msgstr "Anzahl Tasten"
-#: ../../loopback.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bei den Einh盲ngpunkten %s\n"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnam QWERTY (鈥瀗umber row鈥)"
-#: ../../lvm.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
+msgid "Module"
+msgstr "Modul"
-#: ../../modules.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-"Die PCMCIA-Unterst眉tzung f眉r 2.2er Kerne wurde eingestellt. Verwenden Sie "
-"bitte einen 2.4er Kern."
+"Warteschlangen, die nicht mit diesem Programm oder 鈥瀎oomatic-configure鈥 "
+"ertellt wurden, k枚nnen nicht 眉bertragen werden."
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren:"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Strg und Alt gleichzeitig"
-#: ../../mouse.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
+msgid "United States"
+msgstr "Vereinigte Staaten von Amerika"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Keine Maus"
+msgid "Default OS?"
+msgstr "Standard BS"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "keine"
+msgid "Swiss (German layout)"
+msgstr "Schweiz (deutsches Layout)"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 Tasten"
+msgid "Configure all heads independently"
+msgstr "Alle Karten getrennt konfigurieren"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 Tasten"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Bitte w盲hlen Sie den Drucker, den Sie einrichten wollen. Die Einrichtung "
+"wird voll-automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt "
+"worden sein oder wollen Sie die Einrichtung selbst vornehmen, w盲hlen Sie "
+"鈥濵anuelle Konfiguration鈥."
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 Taste"
+msgid "NTP Server"
+msgstr "NTP Server"
-#: ../../mouse.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "busmouse"
-msgstr "Bus-Maus"
+msgid "Load/Save on floppy"
+msgstr "Laden von/Speichern auf Diskette"
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
+msgid "nice"
+msgstr "angenehm"
-#: ../../mouse.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Leaving in %d seconds"
+msgstr "Abbruch in %d Sekunden"
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Serie"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Bitte w盲hlen Sie den seriellen Anschluss, an dem Ihr Modem h盲ngt."
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
+msgid "Country"
+msgstr "Staat"
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
+msgid "Property"
+msgstr "Eigenschaft"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "LAN Configuration"
+msgstr "LAN Konfiguration"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
+msgid "Path or Module required"
+msgstr "Pfad oder Modul ben枚tigt"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
+msgid "Advanced Options"
+msgstr "Erweiterte Einstellungen"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus"
+msgid "Coma bug"
+msgstr "Coma-Fehler"
-#: ../../mouse.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "serial"
-msgstr "Seriell"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Sie m眉ssen nun entscheiden, auf welche(n) Partition(en) Ihr neues Mandrake\n"
+"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
+"(etwa von einer fr眉heren Installation von GNU/Linux oder durch das Erzeugen\n"
+"mit einem anderen Partitionierungswerkzeug), k枚nnen Sie diese verwenden.\n"
+"Anderenfalls m眉ssen Sie Partitionen definieren.\n"
+"\n"
+"Um Partitionen zu erzeugen m眉ssen Sie erst eine Festplatte w盲hlen. Sie\n"
+"k枚nnen die Platte w盲hlen in dem Sie 鈥瀐da鈥 f眉r die erste IDE-Platte w盲hlen,\n"
+"鈥瀞da鈥 f眉r die erste SCSI-Platte, usw.\n"
+"\n"
+"Um die gew盲hlte Platte zu partitionieren stehen folgende M枚glichkeiten zur\n"
+"Verf眉gung:\n"
+"\n"
+" * 鈥%s鈥: Bet盲tigen dieser Schaltfl盲che l枚scht alle Partitionen auf der\n"
+"markierten Festplatte.\n"
+"\n"
+" * 鈥%s鈥: Dieser Punkt aktiviert die automatische ext3- und\n"
+"Swap-Partitionen-Erstellung im ungenutzten Bereich Ihrer Festplatte.\n"
+"\n"
+"鈥%s鈥: bietet Zugriff auf weitere M枚glichkeiten:\n"
+"\n"
+" * 鈥%s鈥: Falls Sie Ihre aktuelle Partitionstabelle auf Diskette speichern\n"
+"wollen, falls Sie sie sp盲ter wiederherstellen wollen, k枚nnen Sie das mit\n"
+"Hilfe dieser Schaltfl盲che tun.\n"
+"\n"
+" * 鈥%s鈥: Mit dieser Schaltfl盲che k枚nnen Sie eine vorher auf Diskette\n"
+"gesicherte Partitionstabelle wieder herstellen.\n"
+"\n"
+" * 鈥%s鈥: Sollte Ihre Partitionstabelle zerst枚rt worden sein, k枚nnen Sie\n"
+"versuchen, mit dieser Schaltfl盲che eine Restaurierung vorzunehmen. Seien\n"
+"Sie vorsichtig! es ist nicht unwahrscheinlich, dass dieser Versuch fehl\n"
+"schl盲gt.\n"
+"\n"
+" * 鈥%s鈥: Alle 脛nderungen verwerfen und mit der urspr眉nglichen\n"
+"Partitionstabelle neu beginnen.\n"
+"\n"
+" * 鈥%s鈥: Entfernen dieser Markierung f眉hrt dazu, dass die Anwender\n"
+"hinterher die Wechselmedien manuell ein- und aush盲ngen m眉ssen.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie keine Ahnung haben wie Sie die Festplatte partitionieren\n"
+"sollen, w盲hlen Sie diese Schaltfl盲che. Sie 眉berlassen damit die gesamte\n"
+"Arbeit unserem Assistenten, der mittels 鈥濧bra Kadabra鈥(TM) Ihre Platte\n"
+"partitioniert.\n"
+"\n"
+" * 鈥%s鈥: Mit dieser Schaltfl盲che k枚nnen Sie alle Einstellungen r眉ckg盲ngig\n"
+"machen.\n"
+"\n"
+" * 鈥%s鈥: Anbieten bzw. Maskieren von Zusatzm枚glichkeiten.\n"
+"\n"
+" * 鈥%s鈥: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
+"aktivieren Sie diese Schaltfl盲che, um Ihre 脛nderungen zu speichern.\n"
+"\n"
+"Wenn Sie die Gr枚脽e einer Partition festlegen wollen, k枚nnen Sie die\n"
+"Feineinstellungen mit den Rechts- / Links-Pfeiltasten Ihrer Tastatur\n"
+"vornehmen.\n"
+"\n"
+"Information: Sie k枚nnen alle Einstellungen per Tastatur vornehmen. Mittels\n"
+"[Tab] und den Hoch-/Runter Pfeiltasten bewegen.\n"
+"\n"
+"Wenn eine Partition ausgew盲hlt ist, k枚nnen Sie mittels:\n"
+"\n"
+" * Ctrl-C - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
+"Partition sind)\n"
+"\n"
+" * Ctrl-D - die Partition l枚schen\n"
+"\n"
+" * Ctrl-M - dem Einh盲ngpunkt festlegen.\n"
+"\n"
+"Um mehr Informationen 眉ber die verschiedenen Dateisystemtypen zu erhalten,\n"
+"lesen Sie bitte das Kapitel ext2FS in der 鈥濺eferenz鈥.\n"
+"\n"
+"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
+"eine mindestens 1MB, gro脽e HFS Start-Partition f眉r den\n"
+"Betriebssystemstarter yaboot erstellen. Wenn Sie diese Partition etwas\n"
+"gr枚脽er dimensionieren, etwa 50MB, haben Sie einen geeigneten Platz, um\n"
+"einen Rettungskern samt RamDisk abzulegen, um in Notf盲llen starten zu\n"
+"k枚nnen."
-#: ../../mouse.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Grafikkarte\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
+"entsprechend ein. Sollten dabei Probleme auftreten, k枚nnen Sie in der hier\n"
+"aufgef眉hrten Liste Ihr Modell ausw盲hlen.\n"
+"\n"
+" Falls f眉r Ihre Karte verschiedene Server zur Verf眉gung stehen, etwa mit\n"
+"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu w盲hlen, der Ihren\n"
+"Bed眉rfnissen am besten entspricht."
-#: ../../mouse.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rad"
+msgid "There was an error installing packages:"
+msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic"
-msgstr "Generisch"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark Tintenstrahl-Konfiguration"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Undo"
+msgstr "R眉ckg盲ngig"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Save partition table"
+msgstr "Partitionstabelle schreiben"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
+msgid "Finnish"
+msgstr "Finnland"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
+msgid "Macedonia"
+msgstr "Mazedonien"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Das Teilen zwischen Benutzern verwendet die Gruppe 鈥瀎ileshare鈥.\n"
+"Sie k枚nnen UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
+"aufzunehmen."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
+msgid "Slovenian"
+msgstr "Slowenien"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
+msgid "Libya"
+msgstr "Lybien"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Expand Tree"
-msgstr "Baum erweitern"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info"
-msgstr "Info"
+msgid "Table"
+msgstr "Tabelle"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
+msgid "I don't know how to format %s in type %s"
+msgstr ""
+"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
+"formatieren."
-#: ../../my_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Model"
+msgstr "Modell"
-#: ../../partition_table.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
+msgid "Stop Server"
+msgstr "Server stoppen"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"W盲hlen Sie sich\n"
+"das Aussehen von\n"
+"LILO und dem\n"
+"Startschirm.\n"
+"Sie k枚nnen\n"
+"unterschiedliche\n"
+"Varianten w盲hlen."
-#: ../../partition_table.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Modem"
+msgstr "Modems"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige L枚sung ist, dass Sie \n"
-"Ihre prim盲ren Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../partition_table.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "Fehler beim Einh盲ngen: "
+msgid "Use auto detection"
+msgstr "Autoerkennung benutzen"
-#: ../../pkgs.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "maybe"
-msgstr "eventuell"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"Der GPM-Dienst stellt Ihnen Mausunterst眉tzung auf Text-Konsolen zur \n"
+"Verf眉gung. Sie erhalten damit die M枚glichkeit Ausschneiden und \n"
+"Einf眉gen von Text wie unter X zu verwenden. In einigen Applikationen \n"
+"k枚nnen Sie auch Pop-Up-Men眉s damit bedienen."
-#: ../../pkgs.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "nice"
-msgstr "angenehm"
+msgid "Started on boot"
+msgstr "Beim Hochfahren gestartet"
-#: ../../pkgs.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "very nice"
-msgstr "sehr angenehm"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "important"
-msgstr "wichtig"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "must have"
-msgstr "unbedingt notwendig"
+msgid "Automatically find available printers on remote machines"
+msgstr "Automatische Suche nutzbarer Drucker auf anderen Rechnern"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht gen眉gend Partitionen f眉r RAID Level %d\n"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Auf Band an Ger盲t %s sichern"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid schlug Fehl"
+msgid "East Timor"
+msgstr "Ost Timor"
-#: ../../raid.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid schlug Fehl (M枚glicherweise fehlen die RAID-Tools)"
+msgid "Del profile..."
+msgstr "Profil l枚schen..."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzuf眉gen"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop"
-msgstr "Stopp"
+msgid "Installing Foomatic..."
+msgstr "Installieren des Pakets Foomatic ..."
-#: ../../services.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Start"
-msgstr "Start"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Bitte loggen Sie sich aus, und dr眉cken Sie Ctrl-Alt-R眉cktaste"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "On boot"
-msgstr "Bei BS-Start"
+msgid "detected"
+msgstr "gefunden"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Das Netzwerk muss neu gestartet werden. Soll ich es neu starten?"
-#: ../../services.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Services and deamons"
-msgstr "Dienste und D盲monen"
+msgid "Package: "
+msgstr "Paket:"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "stopped"
-msgstr "gestoppt"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Ich kann 鈥/etc/sysconfig/bootsplash鈥 nicht anlegen."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "aktiv"
+msgid "SECURITY WARNING!"
+msgstr "SICHERHEITSWARNUNG!"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"W盲hlen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Database Server"
-msgstr "Datenbankserver"
+msgid "No, I don't want autologin"
+msgstr "Nein ich will kein Autologin"
-#: ../../services.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Remote Administration"
-msgstr "Fernwartung"
+msgid "Windows Migration tool"
+msgstr "Windows Migrationswerkzeug"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Gemeinsamer Dateizugriff"
+msgid "All languages"
+msgstr "Alle Sprachen"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Removing %s"
+msgstr "Entferne: %s"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing"
-msgstr "Drucken"
+msgid "Testing your connection..."
+msgstr "Ich teste gerade Ihre Verbindung..."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid "Cache size"
+msgstr "Cachegr枚脽e"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit XFree gestartet werden kann!"
+"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
+"Netzwerkrechner kann hier nicht empfohlen werden."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "L盲dt die Treiber f眉r Ihre USB-Ger盲te."
+msgid "Start sector: "
+msgstr "Anfangssektor: "
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzerkennzeichen 眉bermittelt zu bekommen \n"
-"(盲hnlich wie finger)."
+msgid "Seychelles"
+msgstr "Seychellen"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-"Der Dienst rusers erm枚glicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
-"gerade angemeldet sind."
+"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
+"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
+"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
+"ist. Kontrollieren Sie, ob die Wahl korrekt ist und w盲hlen Sie die "
+"Schaltfl盲che 鈥濪as Modell ist richtig鈥, wenn der Treiber Ihren W眉n "
+"entspricht, andernfalls bet盲gen Sie 鈥濵odell ausw盲hlen鈥, um die Auswahl "
+"selbst vorzunehmen.\n"
+"\n"
+"Folgender Drucker wurde gefunden:\n"
+"\n"
+"%s"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat erm枚glicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
+msgid "Bad password on %s"
+msgstr "Schlechtes Passwort auf %s"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
-"Der Dienst routed erm枚glicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird f眉r komplexere Netzwerke ein \n"
-"anderer Dienst ben枚tigt."
+"\n"
+"Ich konnte einen unbekannten Drucker direkt an Ihrem Rechner finden."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Weist Roh-Ger盲ten ein blockorientiertes Ger盲t (etwa eine\n"
-"Festplattenpartition) zu. Dies wird f眉r Anwendungen wie\n"
-"etwa ORACLE Datenbankem oder DVD Spielern ben枚tigt"
+msgid "Zambia"
+msgstr "Sambia"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim n盲chsten Systemstart \n"
-"wieder zu restaurieren. Die Qualit盲t erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
+msgid "Security Administrator (login or email)"
+msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail)"
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
+msgid "Romanian (qwerty)"
+msgstr "Rum盲nien (QWERTY)"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu k枚nnen. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
+msgid "Under Devel ... please wait."
+msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
-#: ../../services.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Unterst眉tzung f眉r den OKI 4w und kompatible WinDrucker."
+msgid "Czech Republic"
+msgstr "Tschechische Republik"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die 鈥濶um鈥-Taste f眉r \n"
-"die virtuellen Konsolen und XFree ein."
+msgid "Egypt"
+msgstr "脛gypten"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein gel盲ufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu k枚nnen. \n"
-"Der Dienst nfslock stellt Ihnen hierf眉r Locking-Mechanismen zur \n"
-"Verf眉gung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig ver盲ndert werden kann."
+msgid "Old configuration (isdn4net)"
+msgstr "Alte Konfiguration (isdn4net)"
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein gel盲ufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu k枚nnen. \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur Verf眉gung. \n"
-"Konfiguriert wird er in der Datei 鈥/etc/exports鈥."
+msgid "Sound card"
+msgstr "Soundkarte"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert Netzwerkger盲te (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur Verf眉gung \n"
-"stehen sollen."
+msgid "Import Fonts"
+msgstr "Schriften einbinden"
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
-"Dieser Dienst ist verantwortlich daf眉r, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) bei Systemstart eingeh盲ngt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
+"Sie haben nur eine gro脽e FAT Partition \n"
+"(diese enth盲lt h盲ufig nur Microsoft DOS/Windows).\n"
+"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
+"(W盲hlen Sie sie an und dr眉cken Sie dann 鈥濭r枚脽e ver盲ndern鈥)"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur Verf眉gung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird 鈥濪omain Name Server鈥 (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
-"Netz gehen, ben枚tigen Sie diesen Dienst nicht."
+msgid "Suppress Temporary Files"
+msgstr "Tempor盲re Dateien l枚schen"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um um ein \n"
-"hochperformanten Hochverf眉gbarkeitsserver aufzusetzen."
+msgid "Change partition type"
+msgstr "Partitionstyp 盲ndern"
-#: ../../services.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
msgstr ""
-"Der Dienst LPD ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden Druckauftr盲ge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von LPD ist es, Druckauftr盲ge an den jeweiligen \n"
-"zust盲ndigen Drucker (dieser kann auch einen anderen Rechner h盲ngen) \n"
-"zu senden."
+"Aufl枚sung\n"
+"\n"
+" Sie k枚nnen hier Aufl枚sung und Farbtiefe f眉r Ihre Hardware w盲hlen.\n"
+"Entscheiden Sie sich, welche Variante Ihren W眉nschen am ehesten entspricht\n"
+"(Sie k枚nnen diese Angaben nat眉rlich nach der Installation noch 盲ndern). Sie\n"
+"k枚nnen sich einen Eindruck anhand des abgebildeten Monitors bilden."
-#: ../../services.pm:1
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Network Options"
+msgstr "Netzwerkoptionen"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"Display theme\n"
+"under console"
msgstr ""
-"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
-"auszuf眉hren."
+"Bildschirm-Thema\n"
+"f眉r die Konsole"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware w盲hrend des \n"
-"Betriebssystemstarts."
+msgid "Statistics"
+msgstr "Statistiken"
-#: ../../services.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kern-Header in /boot f眉r\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "(on %s)"
+msgstr "(an %s)"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst l盲dt die Tastaturbelegung, die in der Datei \n"
-"鈥/etc/sysconfig/keyboard鈥 angegeben ist. Mittels 鈥瀔bdconfig鈥 \n"
-"k枚nnen Sie diese Einstellung 盲ndern. Schalten Sie diesen Dienst ab, \n"
-"m眉ssen Sie ab dem n盲chsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
+msgid "MM Series"
+msgstr "MM Serie"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung f眉r Linux 2.2er Kerne, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu sch眉tzen."
+"A library which defends against buffer overflow and format string attacks."
+msgstr "Eine Bibliothek, die gegen sog. 鈥瀊uffer overflow鈥-Angriffe sch眉tzt."
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei 鈥/etc/inetd.conf鈥 freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, k枚nnen Sie keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
+msgid "average"
+msgstr "Durchschnitt"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe k枚nnen Sie \n"
-"HTML-Dateien 眉ber HTTP publizieren. Der Server ist CGI-f盲hig."
+msgid "New printer name"
+msgstr "Neuer Druckername"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake f眉hrt Hardwaretests durch, und konfiguriert (falls n枚tig) \n"
-"neue/ge盲nderte Hardware."
+msgid "Equatorial Guinea"
+msgstr "脛quatorial-Guinea"
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
msgstr ""
-"Der GPM-Dienst stellt Ihnen Mausunterst眉tzung auf Text-Konsolen zur \n"
-"Verf眉gung. Sie erhalten damit die M枚glichkeit Ausschneiden und \n"
-"Einf眉gen von Text wie unter X zu verwenden. In einigen Applikationen \n"
-"k枚nnen Sie auch Pop-Up-Men眉s damit bedienen."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelm盲脽igen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
+msgid "Build Backup"
+msgstr "Sicherung erstellen"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"daf眉r vorgesehene Zeitpunkt erreicht ist. L盲sst die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
+"Verwenden Sie einen der Befehle 鈥%s <Datei>鈥 oder 鈥%s <Datei>鈥, um die Datei "
+"<Datei> in der Kommandozeile auszudrucken.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+msgid "Currently, no alternative possibility is available"
msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron k枚nnen cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr l盲uft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgef眉hrt w眉rden."
+msgid "Romanian (qwertz)"
+msgstr "Rum盲nien (QWERTZ)"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Write Config"
+msgstr "Konfiguration speichern"
#: ../../services.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Der Dienst routed erm枚glicht ein automatisches Aktualisieren der \n"
+"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
+"Netzwerken verwendet, jedoch wird f眉r komplexere Netzwerke ein \n"
+"anderer Dienst ben枚tigt."
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Pakete Installieren ..."
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../standalone.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Allow/Forbid remote root login."
msgstr ""
-"\n"
-"Verwendung: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-#: ../../standalone.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "Browse"
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-#: ../../standalone.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "CDROM"
+msgstr "CD-ROMs"
-#: ../../standalone.pm:1
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "M枚chten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belgian"
+msgstr "Belgien"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "Verf眉gen Sie 眉ber eine ISA soundkarte?"
+
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
-"[OPTION]...\n"
-" --no-confirmation keine Fragen im MandrakeUpdate Modus stellen\n"
-" --no-verify-rpm Paketsignaturen nicht 眉berpr眉fen\n"
-" --changelog-first 脛nderungsprotokoll vor Dateiliste anzeigen\n"
-" --merge-all-rpmnew Zusammenlegen aller .rpmnew/.rpmsave Dateien "
-"vorschlagen"
+"Ich habe keine Ethernet-Netzwerkkarte finden k枚nnen, daher kanndieser "
+"Verbindungstyp nicht konfiguriert werden."
-#: ../../standalone.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Windows"
+msgstr "Windows"
-#: ../../standalone.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "Can't make screenshots before partitioning"
msgstr ""
-"[OPTIONS]\n"
-"Anwendung zur Verbindung und 脺berwachung von Netzwerk und Internet\n"
-"\n"
-"--defaultintf interface : zeige diese Schnittstelle als Voreinstellung\n"
-"--connect : verbinde mit dem Internet wenn nicht schon verbunden\n"
-"--disconnect : trenne vom Internet wenn verbunden\n"
-"--force : bei (dis)connect : erzwinge Verbinden/Trennen.\n"
-"--status : gibt 1 zur眉ck wenn verbunden sonst 0, beendet sich danach.\n"
-"--quiet : nicht interaktiv. benutzt mit (dis)connect."
+"Vor der Partitionierung kann ich keine Bildschirm-Schnappsch眉sse machen."
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=datei] [--word=word] [--explain=ausdruck] [--alert]"
+msgid "Host Name"
+msgstr "Rechnername"
-#: ../../standalone.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "[keyboard]"
-msgstr "[Tastatur]"
+msgid "/File/Save _As"
+msgstr "/Datei/Speichern _unter ..."
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : MTS einschalten\n"
-"--disable : MTS ausschalten\n"
-"--start : MTS starten\n"
-"--stop : MTS anhalten\n"
-"--adduser : einen existierenden Systemnutzer zu MTS hinzuf眉gen "
-"(ben枚tigt Nutzernamen)\n"
-"--deluser : einen existierenden Systemnutzer von MTS l枚schen "
-"(ben枚tigt Nutzernamen)\n"
-"--addclient : einen Client zu MTS hinzuf眉gen (ben枚tigt MAC Adresse, IP, "
-"NBI Image Name)\n"
-"--delclient : einen Client von MTS l枚schen (ben枚tigt MAC Adresse, IP, "
-"NBI Image Name)"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONEN] [PROGRAMMNAME]\n"
-"\n"
-"OPTIONEN:\n"
-" --help - Asgabe dieses Hilfetextes.\n"
-" --report - Name eines Mandrake Programms.\n"
-" --incident - Name eines Mandrake Programms."
+msgid "Delay before booting default image"
+msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Archivierungs- und Restaurierungs-Programm\n"
-"\n"
-"--default - Speichern der Standardverzeichnisse.\n"
-"--debug - Ausgabe aller Debug-Informationen.\n"
-"--show-conf - Liste der zu archivierenden Dateien/Verzeichnisse.\n"
-"--config-info - Erkl盲rung der Konfigurationsdatei-Parameter (f眉r nicht-X "
-"Anwender).\n"
-"--daemon - Verwende die Dienst-Konfiguration. \n"
-"--help - Asgabe dieses Hilfetextes.\n"
-"--version - Ausgabe der Versionsnummer.\n"
+msgid "Restrict command line options"
+msgstr "Gebrauch der Kommandozeilen-Parameter einschr盲nken"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgid "East Europe"
+msgstr "Osteuropa"
-#: ../../steps.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Installation beenden"
+msgid "Use free space"
+msgstr "Freien Platz verwenden"
-#: ../../steps.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Install updates"
-msgstr "Aktualisierungen installieren"
+msgid "use dhcp"
+msgstr "DHCP verwenden"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
+msgid "Mail alert"
+msgstr "E-Mail Benachrichtigung"
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Configure X"
-msgstr "X konfigurieren"
+msgid "Internet configuration"
+msgstr "Internet Konfiguration"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "BS-Starter installieren"
+msgid "Uzbekistan"
+msgstr "Usbekistan"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
+msgid "Detected %s"
+msgstr "%s gefunden"
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Add a user"
-msgstr "Benutzer hinzuf眉gen"
+msgid "/Autodetect _printers"
+msgstr "/_Drucker automatisch erkennen"
-#: ../../steps.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Root password"
-msgstr "Root Passwort"
+msgid "Finish"
+msgstr "Assistent beenden"
-#: ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Install system"
-msgstr "System installieren"
+msgid "Show automatically selected packages"
+msgstr "Anzeige automatisch markierter Pakete"
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
+msgid "Togo"
+msgstr "Togo"
-#: ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Partitioning"
-msgstr "Partitionierung"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Es trat ein Fehler auf! Ist 鈥瀖kisofs鈥 installiert?"
-#: ../../steps.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Tastatur ausw盲hlen"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Installationsart ausw盲hlen"
+msgid "Please try again"
+msgstr "Bitte versuchen Sie es erneut"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
+msgid "The model is correct"
+msgstr "Das Modell ist richtig"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
+msgid "FAT resizing failed: %s"
+msgstr "FAT Gr枚脽enanpassung schlug Fehl: %s"
-#: ../../steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "License"
-msgstr "Lizenz"
+msgid "Individual package selection"
+msgstr "Individuelle Paketauswahl"
-#: ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Language"
-msgstr "Sprache ausw盲hlen"
+msgid "This partition is not resizeable"
+msgstr "Die Gr枚脽e dieser Partition kann ich nicht 盲ndern"
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid "Location"
+msgstr "Standort"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "OK"
-msgstr " Ok "
+msgid "USA (cable-hrc)"
+msgstr "USA (Kabel-hrc)"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "logdrake"
-msgstr "LogDrake"
+msgid "Journalised FS"
+msgstr "Journalisierendes FS"
-#: ../../ugtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Installationsbildschirmtreiber)"
+msgid "This machine"
+msgstr "Dieser Rechner"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
-"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS F脺HREN."
+"W盲hlen Sie die Dateien oder Verzeichnisse und bet盲tigen Sie die Schaltfl盲che "
+"鈥濰inzuf眉gen鈥"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
+msgid "omit scsi modules"
+msgstr " SCSI Module weglassen "
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "CPU-Familie (6 steht etwa f眉r i686)."
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
-"ZUM STEHENBLEIBEN IHRES RECHNERS F脺HREN. Ihre Karte wird auch von \n"
-"XFree %s unterst眉tzt, wodurch Sie bessere 2D-Unterst眉tzung erhalten \n"
-"k枚nnen."
+"Da Sie eine Netzwerkinstallation durchf眉hren, ist Ihr Netzwerk bereits\n"
+"konfiguriert. W盲hlen Sie 鈥濷K鈥, um diese Einstellung beizubehalten oder\n"
+"鈥濧bbruch鈥, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
+"konfigurieren.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "Tastaturtyp: %s\n"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. Ihre Karte wird auch von XFree %s unterst眉tzt, wodurch Sie \n"
-"bessere 2D-Unterst眉tzung erhalten k枚nnen."
+"Hier k枚nnen Sie einstellen, ob die Drucker, die an diesem Rechner h盲ngen, "
+"f眉r andere Rechner nutzbar sein sollen und falls ja, f眉r welche."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Maltese (US)"
+msgstr "Malta (USA)"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Nur Karte 鈥%s鈥 (%s) konfigurieren"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Dieser Dienst ist verantwortlich daf眉r, dass alle Netzwerk-Dateisysteme \n"
+"(NFS) bei Systemstart eingeh盲ngt werden, etwa SMB (Lan Manager/Windows) \n"
+"und NCP (NetWare)."
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama Erweiterung verwenden"
+msgid "Tvcard"
+msgstr "TV-Karten"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "In den Normal-Modus wechseln"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Alle Karten getrennt konfigurieren"
+msgid "Size"
+msgstr " Gr枚脽e "
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
+msgid "Greenland"
+msgstr "Gr枚nland"
-#: ../../Xconfig/card.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfigurieren"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MausMan+/FirstMaus+"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "W盲hlen Sie die Speichergr枚脽e Ihrer Grafikkarte"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Ihr System unterst眉tzt die gleichzeitige Verwendung mehrerer Monitore.\n"
-"Was wollen Sie?"
+"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
+"Momentan ist sie aktiviert.\n"
+"\n"
+"Was wollen Sie tun?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Mehrmonitor-Einstellung"
+msgid "Delete All NBIs"
+msgstr "Alle NBIs l枚schen"
-#: ../../Xconfig/card.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "W盲hlen Sie einen X Server"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"DrakX bietet Ihnen einen Dialog mit verschiedenen Auswahlm枚glichkeiten.\n"
+"\n"
+" * 鈥%s鈥: Hier erhalten Sie drei Alternativen:\n"
+"\n"
+" * 鈥%s鈥: Falls Sie grub (Textmen眉) bevorzugen.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie LILO mit Textmen眉 als Ihren Favoriten ansehen.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie LILO mit seiner grafischen Oberfl盲che bevorzugen.\n"
+"\n"
+" * 鈥%s鈥: Normalerweise m眉ssen Sie hier nichts 盲ndern (鈥%s鈥), Sie k枚nnten\n"
+"jedoch den Starter auch auf der zweiten Platte installieren, (鈥%s鈥) oder\n"
+"sogar auf einer Diskette (鈥%s鈥).\n"
+"\n"
+" * 鈥%s鈥: Wenn Sie Ihren Rechner neu starten erhalten Sie im Men眉 der zur\n"
+"Verf眉gung stehenden BSe eine gewisse Zeit um auszuw盲hlen, was Sie starten\n"
+"m枚chten. Sollten Sie w盲hrend dieser Zeit keine Wahl getroffen haben, wird\n"
+"Ihr Standard-BS gestartet.\n"
+"\n"
+"!! Machen Sie sich klar, dass Sie sich selbst darum k眉mmern m眉ssen,\n"
+"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
+"Betriebssystemstarter installieren (durch Auswahl von 鈥%s鈥). Stellen Sie\n"
+"auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
+"ver盲ndern ... !!\n"
+"\n"
+"Durch w盲hlen der Schaltfl盲che 鈥%s鈥 erhalten Sie etliche Optionen, die dem\n"
+"fortgeschrittenen Anwender vorbehalten bleiben."
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "X server"
-msgstr "X Server"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"Wenn ausgef眉llt, wird E-Mail an diese Adresse geschickt, sonst an 鈥瀝oot鈥."
#: ../../Xconfig/card.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "More"
+msgstr "Mehr"
-#: ../../Xconfig/card.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Mit dieser Sicherheitsebene wird es m枚glich, das System als einen \n"
+"Server zu verwenden.\n"
+"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
+"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
+"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
+"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
+"verwenden sollte."
-#: ../../Xconfig/card.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Account Password"
+msgstr "Passwort"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
+"zu starten.\n"
+"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
+"Record haben (etwa System Commander).\n"
+"\n"
+"Von welchem Verzeichnis wollen Sie starten?"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Tajik keyboard"
+msgstr "Tadschikistan"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Sie k枚nnen die Druckerkonfiguration, die Sie f眉r den Spooler 鈥%s鈥 "
+"vorgenommen haben f眉r 鈥%s鈥, ihren aktuellen Spooler, verwenden. Alle Daten "
+"(Name, Beschreibung, Standort, Verbindungsart und standard "
+"Optionseinstellungen) werden 眉bernommen, Druckjobs in der alten "
+"Warteschlange gehen jedoch verloren.\n"
+"Nicht alle Warteschlangen k枚nnen 眉bernommen werden:\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "Font List"
+msgstr "Font-Liste"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Sie m眉ssen Ihr Open Firmware Startger盲t anpassen, dass es den \n"
+"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
+"Eingabeaufforderung des BS-Starters sehen, dr眉cken Sie \n"
+"Strg-Option-O-F und geben Sie folgendes ein:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+"Tippen Sie dann: shut-down\n"
+"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-#: ../../Xconfig/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"Die 脛nderungen beibehalten?\n"
-"Momentan w盲re dies:\n"
-"\n"
-"%s"
+"Sie scheinen einen 鈥濷ldWorld鈥 oder unbekannten\n"
+"Rechner zu verwenden. Der Betriebssystemstarter\n"
+"鈥瀥aboot鈥 wird daher leider nicht funktionieren.\n"
+"Die Installation wird fortgesetzt, sie werden jedoch \n"
+"鈥濨ootX鈥 verwenden m眉ssen um LINUX auf Ihrem Rechner\n"
+"zu starten."
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Options"
-msgstr "Optionen"
+msgid "Select file"
+msgstr "Datei ausw盲hlen"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"W盲hlen Sie Netzwerke bzw. Rechner, denen lokale Drucker bekannt gemacht "
+"werden sollen:"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Aufl枚sung"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Sie k枚nnen diese Befehle auch in der 鈥濪ruck-Kommando鈥-Zeile des Druckdialogs "
+"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
+"die zu druckende Datei von der Anwendung geliefert wird.\n"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "Japan"
+msgstr "Japan"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafikkarte"
+msgid "Print option list"
+msgstr "Liste der Drucker-Optionen"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
+"Neuanmeldung wirksam"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
+msgid "Search servers"
+msgstr "Server suchen"
-#: ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "Der NCP Warteschlangen-Name fehlt!"
+
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate ausw盲hlen, da Sie sonst Ihren Monitor besch盲digen \n"
-"k枚nnten. Im Zweifelsfall w盲hlen Sie bitte eine konservativere \n"
-"Einstellung."
+"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
+"diese ihr Netzwerk."
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Das Plug'n'Play testen schlug fehl. Bitte w盲hlen Sie einen Monitor."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM 鈥%s鈥"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Hersteller"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
+"des Zufallszahlengenerators, um ihn beim n盲chsten Systemstart \n"
+"wieder zu restaurieren. Die Qualit盲t erzeugter Zufallszahlen \n"
+"wird dadurch verbessert."
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n'Play"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Es traten Fehler beim Kontrollieren des Dateisystems %s auf. Wollen Sie, "
+"dass ich versuche sie zu beheben? (Achtung: das kann zu Datenverlust f眉hren)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Choose a monitor"
-msgstr "W盲hlen Sie Ihren Monitor"
+msgid "Turn your computer into a reliable server"
+msgstr "Verwandeln Sie Ihren Rechner in einen zuverl盲ssigen Server."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikkarte: %s"
+msgid " (driver %s)"
+msgstr " (Treiber %s)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "W盲hlen Sie bitte Aufl枚sung und Farbtiefe"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Loopback Datei(en):\n"
+" %s\n"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Resolutions"
-msgstr "Aufl枚sungen"
+msgid "I don't know"
+msgstr "Keine Ahnung"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 Milliarden Farben (32 Bit)"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP Drucker 鈥%s鈥, Port %s"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
+msgid ""
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
+"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
+"M枚glichkeit ist gef盲hrlich und sollte mit Vorsicht verwendet werden!\n"
+"\n"
+"Sie k枚nnen mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
+"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
+"Einfluss nehmen zu k枚nnen.\n"
+"\n"
+"Aus Sicherheitsgr眉nden wird die Partitionierung und Formatierung nie\n"
+"automatisch durchgef眉hrt.\n"
+"\n"
+"Wollen Sie fortfahren?"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Ihre Karte verwendet momentan den %s 鈥%s鈥 Treiber (Voreinstellung f眉r Ihre "
+"Karte ist 鈥%s鈥)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
+msgid "Post Uninstall"
+msgstr "Nach dem Entfernen"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
+msgid " ("
+msgstr " ("
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ist dies die richtige Einstellung?"
+msgid "Cpuid level"
+msgstr "CPUID Ebene"
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Abbruch in %d Sekunden"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolei (Kyrillisches Layout)"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Es trat ein Fehler auf:\n"
-"%s\n"
-"Versuchen Sie, einen Parameter zu 盲ndern."
+msgid "Add a module"
+msgstr "Modul hinzuf眉gen"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
+msgid "Profile to delete:"
+msgstr "Zu l枚schendes Profil: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "M枚chten Sie die vorgenommenen Einstellungen pr眉fen?"
+msgid "Local measure"
+msgstr "Lokale Messung"
-#: ../../Xconfig/test.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Pr眉fen der Einstellungen"
+msgid "busmouse"
+msgstr "Bus-Maus"
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Um welche Fernsehnorm handelt es sich?"
+msgid "Account Login (user name)"
+msgstr "Kennzeichen (Login)"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+"drakfirewall configurator\n"
"\n"
-"Do you have this feature?"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Ihre Grafikkarte scheint einen TV-Ausgang zu haben, der mittels Frame-Buffer "
-"angesprochen werden kann.\n"
-"\n"
-"Wenn Sie das w眉nschen, schlie脽en Sie bitte Ihren Fernseher an die "
-"Grafikkarte an, bevor Sie den Rechner neu starten.\n"
-"W盲hlen Sie 鈥濼V-Ausgang鈥 im Betriebssystemstarter.\n"
+"DrakFirewall Konfigurierer\n"
"\n"
-"Haben Sie einen solchen Ausgang und wollen Sie ihn verwenden?"
+"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
+"mit DrakConnect eingerichtet haben, bevor Sie fortfahren."
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die grafische Oberfl盲che (= der X Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur Verf眉gung steht?"
+msgid "Benin"
+msgstr "Benin"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X zur Startzeit"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Treiber: %s\n"
+msgid "Path selection"
+msgstr "Pfad-Auswahl"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 Server: %s\n"
+msgid "Name/IP address of host:"
+msgstr "Name/IP-Adresse des Rechners:"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Aufl枚sung: %s\n"
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Mit Ihrer Platte stimmt etwas nicht!\n"
+"Der vorgenommene Integrit盲tstest schlug Fehl.\n"
+"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu zuf盲lligen oder "
+"besch盲digten Daten f眉hren wird."
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
+msgid "Printer host name or IP missing!"
+msgstr "Der Rechnername, bzw die IP-Adresse des Druckers fehlt!"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikkarte: %s\n"
+msgid "Please check all users that you want to include in your backup."
+msgstr ""
+"Bitte w盲hlen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"Der Scanner 鈥%s鈥 Scanner muss von PrinterDrake konfiguriert werden.\n"
+"Sie k枚nnen PrinterDrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
+"starten."
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
+msgid "Bangladesh"
+msgstr "Bangladesch"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Japan (cable)"
+msgstr "Japan (Kabel)"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mausschnittstelle: %s\n"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Willkommen zum Druckerassistenten\n"
+"\n"
+"Dieser Assistent m枚chte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker "
+"sowie Drucker an Windowsrechnern im lokalen Netz zu konfigurieren.\n"
+"\n"
+"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
+"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
+"m眉ssen die Netzwerkdrucker bzw. Windows-Rechner eingeschaltet sein.\n"
+"\n"
+"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas l盲nger "
+"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner h盲ngen. Sie "
+"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
+"h盲ngende Drucker verwenden wollen.\n"
+"\n"
+"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter鈥, wenn Sie soweit sind, bzw. "
+"鈥濧bbruch鈥, wenn Sie keine Drucker konfigurieren wollen."
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
+msgid "Initial tests"
+msgstr "Vortests"
-#: ../../Xconfig/various.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
+msgid "Continue"
+msgstr "Fortfahren"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
+msgid "Custom Restore"
+msgstr "Benutzergef眉hrte Wiederherstellung"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Einh盲ngpunkt: "
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+"鈥%s鈥: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird sie hier\n"
+"angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
+"bet盲tigen Sie einfach die Schaltfl盲che, um sie zu korrigieren."
-#: ../../diskdrake/dav.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Script-based"
+msgstr "Skript-basiert"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Die URL muss mit 鈥瀐ttp://鈥 oder 鈥瀐ttps://鈥 beginnen!"
+msgid "Error reading file %s"
+msgstr "Fehler beim Lesen der Datei %s"
-#: ../../diskdrake/dav.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Bitte geben Sie die WebDAV-Server URL an"
+msgid "PLL setting:"
+msgstr "PLL-Einstellung:"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Einh盲ngpunkt"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Sie m眉ssen eine FAT Partition in 鈥/boot/efi鈥 eingeh盲ngt haben."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
+msgstr " auf "
#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "The URL must begin with http:// or https://"
+msgstr "Die URL muss mit 鈥瀐ttp://鈥 oder 鈥瀐ttps://鈥 beginnen!"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount"
-msgstr "Einh盲ngen"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Sie k枚nnen hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
+"bzw. den Foomatic Spezifikationen gen眉gen. Es sei hier noch angemerkt, dass "
+"nicht alle URI-Typen von allen Drucksystemem unterst眉tzt werden."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Aush盲ngen"
+msgid "Other OS (SunOS...)"
+msgstr "Anderes Betriebssystem (SunOS ...)"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New"
-msgstr "Neu"
+msgid "Install/Upgrade"
+msgstr "Installation/Aktualisierung"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d Pakete"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
msgstr ""
-"WebDAV ist ein Protokoll, dass es Ihnen erlaubt, Webserver-Verzeichnisse\n"
-"einzuh盲ngen, sodass Sie diese wie bei lokalen Dateisystemen verwenden\n"
-"k枚nnen (sofern der Webserver als WebDAV-Server eingerichtet wurde). \n"
-"Falls Sie Einh盲ngpunkte f眉r WebDAV hinzuf眉gen wollen, w盲hlen Sie\n"
-"鈥濶eu鈥."
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Archivierungs- und Restaurierungs-Programm\n"
+"\n"
+"--default - Speichern der Standardverzeichnisse.\n"
+"--debug - Ausgabe aller Debug-Informationen.\n"
+"--show-conf - Liste der zu archivierenden Dateien/Verzeichnisse.\n"
+"--config-info - Erkl盲rung der Konfigurationsdatei-Parameter (f眉r nicht-X "
+"Anwender).\n"
+"--daemon - Verwende die Dienst-Konfiguration. \n"
+"--help - Asgabe dieses Hilfetextes.\n"
+"--version - Ausgabe der Versionsnummer.\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Verwenden Sie stattdessen 鈥%s鈥"
+msgid "Domain Authentication Required"
+msgstr "Dom盲nen-Authentifizierung n枚tig"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Type"
-msgstr "Typ"
+msgid ""
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst 鈥瀠mount鈥"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Delete"
-msgstr "L枚schen"
+msgid "Use libsafe for servers"
+msgstr "鈥瀕ibsafe鈥 bei Servern verwenden"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Create"
-msgstr "Erzeugen"
+msgid "Icelandic"
+msgstr "Island"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Verwendung: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Empty"
-msgstr "Leer"
+msgid "Please relog into %s to activate the changes"
+msgstr ""
+"Bitte loggen Sie sich erneut in %s ein, \n"
+"um die 脛nderungen wirksam werden zu lassen."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Lilo/grub mode"
+msgstr "LILO/GRUB Modus"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Output"
+msgstr "Ausgabe"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Swap"
-msgstr "Auslagerung"
+msgid "Circular mounts %s\n"
+msgstr "Schleife bei den Einh盲ngpunkten %s\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "HardDrive / NFS"
+msgstr "Festplatte/NFS"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Keine Festplatten gefunden"
+msgid "a number"
+msgstr "eine Nummer"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
+msgid "Swedish"
+msgstr "Schweden"
-#: ../../diskdrake/hd_gtk.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Which %s driver should I try?"
+msgstr "Welchen %s-Treiber soll ich versuchen?"
+
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"Sie haben nur eine gro脽e FAT Partition \n"
-"(diese enth盲lt h盲ufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(W盲hlen Sie sie an und dr眉cken Sie dann 鈥濭r枚脽e ver盲ndern鈥)"
+"Sie werden benachrichtigt, falls einer der gew盲hlten Dienste nicht mehr l盲uft"
#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Choose action"
-msgstr "W盲hlen Sie ein Aktion aus"
+msgid "Filesystem types:"
+msgstr "Dateisystemtypen:"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Assistent"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", Multifunktionsger盲t am HP JedDirect"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie aboot verwenden wollen, m眉ssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
+msgid "Northern Mariana Islands"
+msgstr "N枚rdliche Mariannen-Inseln"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
+msgid "none"
+msgstr "keine"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
+msgid "user :"
+msgstr "Benutzer :"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Schl眉ssel (erneut)"
+msgid "Please enter your password"
+msgstr "Bitte geben Sie Ihr Passwort ein"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Encryption key"
-msgstr "Schl眉ssel"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Die Passw枚rter stimmen nicht 眉berein"
+msgid "Floppy"
+msgstr "Diskettenlaufwerke"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Geben Sie an, ob sie Ihr RW-Medium l枚schen wollen (erste Sitzung)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "W盲hlen Sie Ihren Dateisystem-Schl眉ssel (Passwort)"
+msgid "Ghostscript referencing"
+msgstr "Ghostscriptreferenz"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Dateisystem-Schl眉ssel"
+msgid "Bootloader"
+msgstr "Betriebssystemstarter"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Type: "
-msgstr "Typ:"
+msgid "Move"
+msgstr "Bewegen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "auf Kanal %d ID %d\n"
+msgid "Bootloader to use"
+msgstr "Zu verwendender Betriebssystemstarter"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellen Typ: %s\n"
+msgid "SMB server host"
+msgstr "SMB-Server"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM Platten %s\n"
+msgid "Name Servers:"
+msgstr "DNS-Server:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Achtung\n"
+"\n"
+"Bitte lesen Sie die nachfolgenden Ausf眉hrungen sorgf盲ltig. Wenn Sie mit\n"
+"irgendeinem Teil nicht einverstanden sind, d眉rfen Sie nicht den Inhalt\n"
+"der folgenden CDs installieren. Klicken Sie auf 鈥瀂ur眉ckweisen鈥, um die\n"
+"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
+"\n"
+"\n"
+"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
+"oder 盲hnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
+"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
+"Bitte lesen Sie diese Lizenzen sorgf盲ltig und nur wenn Sie mit ihnen\n"
+"einverstanden sind, d眉rfen Sie die entsprechenden Produkte entsprechend\n"
+"ihrer Lizenz benutzen und weitergeben.\n"
+"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
+"(au脽er f眉r Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
+"oder Ver盲ndern der Komponente.\n"
+"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
+"Lizenz einger盲umten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
+"entsprechende Rechte einr盲umt, d眉rfen Sie die Programme nicht auf mehr\n"
+"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
+"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
+"Herausgeber der jeweiligen Komponente.\n"
+"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
+"Dokumentation ist normalerweise verboten.\n"
+"\n"
+"\n"
+"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
+"jeweiligen Autoren und sind durch die Urheberrechtsgesetze f眉r\n"
+"Softwareprodukte gesch眉tzt.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s K枚pfe, %s Sektoren\n"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Diesen Drucker f眉r StarOffice/OpenOffice.org/GIMP entfernen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Gr枚脽e: %s\n"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"Der Linux Virtual Server kann verwendet werden, um um ein \n"
+"hochperformanten Hochverf眉gbarkeitsserver aufzusetzen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Nur lesbar"
+msgid "4 billion colors (32 bits)"
+msgstr "4 Milliarden Farben (32 Bit)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Device: "
-msgstr "Ger盲t: "
+msgid "Micronesia"
+msgstr "Mikronesien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "License"
+msgstr "Lizenz"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to generate the keys."
msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist f眉r die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Autoerkennung von Druckern (Lokal, TCP/Socket und SMB Drucker)"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
msgstr ""
-"\n"
-"Es handelt sich mit gro脽er\n"
-"Wahrscheinlichkeit um eine\n"
-"Treiber-Partition. Sie sollten\n"
-"sie daher besser unver盲ndert\n"
-"lassen.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Ein Fehler ist aufgetreten - es wurden keine g眉ltigen Ger盲te gefunden, auf "
+"denen neue Dateisysteme erstellt werden k枚nnen. Bitte 眉berpr眉fen Sie Ihre "
+"Hardware(-Konfiguration) auf m枚gliche Fehler und falsche Einstellungen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID Platten %s\n"
+msgid "Starting the printing system at boot time"
+msgstr "Drucksystem beim BS-Start aktivieren"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockgr枚脽e %s\n"
+msgid "Do you want to start the connection at boot?"
+msgstr "M枚chten Sie die Verbindung bei Betriebssystemstart herstellen?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
+msgid "Processor ID"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid "Sound trouble shooting"
msgstr ""
-"Partition wird standardm盲脽ig geladen\n"
-" (f眉r MS-DOS Boot, nicht jedoch f眉r LILO)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish (qwerty layout)"
+msgstr "Polen (QWERTY Layout)"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "Jetzt aktivieren"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Loopback Datei(en):\n"
-" %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
+"zu installieren.\n"
+"\n"
+"Dieses Drucksystem l盲uft als D盲mon (Hintergrundprozess), der auf "
+"Druckauftr盲ge wartet, um sie abzuarbeiten. Da der D盲mon auch f眉r andere "
+"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen m枚glichen "
+"Angriffspunkt. Aus Sicherheitsgr眉nden werden in dieser Sicherheitsebene "
+"standardm盲脽ig nur einige ausgew盲hlte D盲mons gestartet.\n"
+"\n"
+"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Eingeh盲ngt\n"
+msgid "Host \"%s\", port %s"
+msgstr "Rechner 鈥%s鈥, Port %s"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
+msgid "This partition can't be used for loopback"
+msgstr "Diese Partition kann nicht als Loopback verwendet werden"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatiert\n"
+msgid "File already exists. Use it?"
+msgstr ""
+"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Zylinder %d bis %d\n"
+msgid "received: "
+msgstr "Enpfangen: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
+msgid "Right Alt key"
+msgstr "AltGr-Taste"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %s"
-msgstr "Gr枚脽e: %s"
+msgid "the list of alternative drivers for this sound card"
+msgstr "Liste alternativer Soundtreiber f眉r diese Soundkarte."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
+msgid "Gateway"
+msgstr "Gateway"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Name: "
-msgstr "Name: "
+msgid "Scanner sharing"
+msgstr "Gemeinsamer Scannerzugriff"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Die Partition %s hei脽t nun %s"
+msgid "Tunisia"
+msgstr "Tunesien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing %s"
-msgstr "Entferne: %s"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopiere: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
+msgid "XawTV isn't installed!"
+msgstr "XawTV ist nicht installiert!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"Das Verzeichnis 鈥%s鈥 enth盲lt bereits Daten\n"
-"(%s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hide files"
-msgstr "Dateien verstecken"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Keine kritischen Dateien (passwd, group, fstab)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
+msgid "old static device name used in dev package"
+msgstr "Alter statischer Name im 鈥瀌ev鈥 Paket"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid "This label is already used"
+msgstr "Dieser Eintrag existiert bereits"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"Nach Formatieren der Partition %s, werden s盲mtliche Daten darauf gel枚scht"
+"\n"
+"Willkommen zum Druckerassistenten\n"
+"\n"
+"Dieser Assistent m枚chte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker zu "
+"konfigurieren.\n"
+"\n"
+"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
+"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
+"m眉ssen die Netzwerkdrucker eingeschaltet und mit dem Netz verbunden sein.\n"
+"\n"
+"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas l盲nger "
+"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner h盲ngen. Sie "
+"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
+"h盲ngende Drucker verwenden wollen.\n"
+"\n"
+"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter鈥, wenn Sie soweit sind, bzw. "
+"鈥濧bbruch鈥, wenn Sie keine Drucker konfigurieren wollen."
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
-"Sie m眉ssen Ihren Rechner neu starten, damit die Ver盲nderungen wirksam werden"
+"Nach Formatieren der Partition %s, werden s盲mtliche Daten darauf gel枚scht"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte 鈥%s鈥 wird gespeichert!"
+msgid "Connection Time: "
+msgstr "Verbindungszeit: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Das Paket %s wird ben枚tigt. Soll ich es installieren?"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und dr眉cken \n"
+"Sie dann 鈥濷K鈥. Falls Sie sie nicht vorliegen haben, dr眉cken Sie \n"
+"鈥濧bbruch鈥."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht: Diese Aktion ist gef盲hrlich."
+msgid "Use group id for execution"
+msgstr "Gruppen-ID zur Ausf眉hrung benutzen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "chunk size"
-msgstr "Blockgr枚脽e"
+msgid "Choose the default user:"
+msgstr "W盲hlen Sie den Standard-Nutzer:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "level"
-msgstr "Level"
+msgid "Gabon"
+msgstr "Gabun"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "device"
-msgstr "Ger盲t"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"Drucker an entfernten CUPS-Servern m眉ssen hier nicht konfiguriert werden; "
+"diese Drucker werden automatisch erkannt."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Various"
-msgstr "Verschiedene"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr ""
+"Sie k枚nnen andere Sprachen ausw盲hlen, die nach der Installation zur "
+"Verf眉gung stehen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Einh盲ng-Optionen"
+msgid "Domain"
+msgstr "Dom盲ne"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr ""
-"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Geben Sie, falls n枚tig, die genaue RAM Gr枚脽e an (%d MB gefunden)"
-#: ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-Verkn眉pfung verwendet, "
-"w盲hlen Sie eine andere Datei."
+"LILO und grub sind Betriebssystemstarter f眉r GNU/Linux. Diese\n"
+"Installationsphase l盲uft in den meisten F盲llen v枚llig automatisch ab. DrakX\n"
+"analysiert den Bootsektor und ergreift dann die passenden Ma脽nahmen:\n"
+"\n"
+" * Findet DrakX einen Windows-Bootsektor, ersetzt es ihn durch einen grub-\n"
+"oder LILO-Bootsektor. Sie erhalten dadurch die M枚glichkeit, beim\n"
+"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
+"vorhanden) und GNU/Linux auszuw盲hlen;\n"
+"\n"
+" * Findet DrakX einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
+"neuen;\n"
+"\n"
+"Falls DrakX nicht wei脽, wo der Betriebssystemstarter installiert werden\n"
+"soll, wird es Sie um Ihre Meinung bitten."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
+msgid "Provider dns 2 (optional)"
+msgstr "Zweiter DNS des Providers (optional)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
+msgid "Boot device"
+msgstr "Boot Ger盲t"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Gr枚脽e in MB:"
+msgid "Which partition do you want to resize?"
+msgstr "Bei welcher Partition wollen Sie die Gr枚脽e 盲ndern?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
+msgid "United States Minor Outlying Islands"
+msgstr "United States Minor Outlying Islands"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "A tool to monitor your logs"
+msgstr "Ihre Logb眉cher betrachen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM Name?"
+msgid "detected on port %s"
+msgstr "an Prot %s gefunden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "new"
-msgstr "Neu"
+msgid "LPD"
+msgstr "LPD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "W盲hlen Sie einen vorhandenen LVM"
+msgid "Graphics card: %s\n"
+msgstr "Grafikkarte: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "W盲hlen Sie einen vorhandenen RAID"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Bewege Partition..."
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Geben Sie an, ob sie ein DVDRAM-Ger盲t verwenden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Moving"
-msgstr "wechsele"
+msgid "Splash selection"
+msgstr "Startschirmauswahl"
-#: ../../diskdrake/interactive.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Zu welchem Sektor wollen Sie wechseln?"
+msgid "Extended partition not supported on this platform"
+msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sector"
-msgstr "Sektor"
+msgid "ISDN Configuration"
+msgstr "ISDN Konfiguration"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Zu welcher Platte wollen Sie wechseln?"
+msgid "high"
+msgstr "Hoch"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Move"
-msgstr "Bewegen"
+msgid "Internet Connection Sharing"
+msgstr "Teilen der Internet-Verbindung"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New size in MB: "
-msgstr "Neue Gr枚脽e in MB:"
+msgid "Choose file"
+msgstr "Dateien w盲hlen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "W盲hlen Sie die neue Gr枚脽e"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
+"M枚glicherweise m眉ssen Sie nach der Installation einige Einstellungen \n"
+"von Hand vornehmen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resize"
-msgstr "Gr枚脽e ver盲ndern"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Drucken/Fotokartenzugriff mit 鈥%s鈥"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"Durch Ver盲nderung der Partitionsgr枚脽e von %s, gehen s盲mtliche Daten darauf "
-"verloren"
+"Wollen Sie oben aufgef眉hrte Drucker oder Drucker im lokalen Netzwerk zum "
+"Drucken konfigurieren?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Auswahl des Druckertyps"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup s盲mtlicher Daten dieser Partition erstellen"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generische PS2 Rad-Maus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Die Gr枚脽e dieser Partition kann ich nicht 盲ndern"
+msgid "Removing old printer \"%s\"..."
+msgstr "Alten Drucker 鈥%s鈥 entfernen ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT Dateisystems"
+msgid "Select a device !"
+msgstr "W盲hlen Sie ein Ger盲t!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Wo wollen Sie 鈥%s鈥 einh盲ngen?"
+msgid "Remove selected server"
+msgstr "L枚schen des markierten Servers"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen Einh盲ngpunkt nicht zur眉cksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
+msgid "French Southern Territories"
+msgstr "French Southern Territories"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das Ger盲t %s einh盲ngen?"
+msgid "the vendor name of the processor"
+msgstr "Herstellername des Prozessors"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einh盲ngen?"
+msgid "All data on this partition should be backed-up"
+msgstr "Sie sollten ein Backup s盲mtlicher Daten dieser Partition erstellen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
+msgid "Installing package %s"
+msgstr "Installation des Pakets %s"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Partitionstyp 盲ndern"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Um mehr Partitionen einrichten zu k枚nnen, m眉ssen Sie zun盲chst eine Partition "
+"l枚schen und anschlie脽end eine erweiterte Partition erzeugen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"Nach 脛nderung des Partitionstyps von %s, werden s盲mtliche Daten darauf "
-"gel枚scht"
+"Ihr Drucker wurde automatisch so konfiguriert, dass Sie von Ihrem Rechner "
+"auf die Foto-Speicherkartenlaufwerke zugreifen k枚nnen. Sie k枚nnen jetzt "
+"entweder mit dem grafischen Programm MToolsFM (Menu: \"Programme\" -> "
+"\"Dateiwerkzeuge\" -> \"MTools File Manager\") oder auf der Kommandozeile "
+"mit den mtools (F眉r mehr Information geben Sie \"man mtools\" auf der "
+"Kommandozeile ein) auf die eingelegte Karte zugreifen. Sie finden das "
+"Dateisystem der Karte unter dem Laufwerksbuchstaben \"p:\" oder, wenn Sie "
+"mehr als einen HP-Drucker mit Foto-Speicherkartenlaufwerken haben, unter den "
+"nachfolgenden Buchstaben. In MToolsFM k枚nnen Sie zwischen den "
+"Laufwerksbuchstaben mit dem Feld 眉ber der oberen rechten Ecke der Dateiliste "
+"umschalten."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
+msgid "Choose packages to install"
+msgstr "Zu installierende Pakete"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Sie k枚nnen keine weiteren Partitionen anlegen (da Sie die maximale \n"
-"Anzahl prim盲rer Partitionen erstellt haben). Bitte l枚schen Sie \n"
-"eine prim盲re Partioion und legen Sie stattdessen eine erweiterte \n"
-"Partition an."
+"\n"
+" Einige der Sendmail-Fehler beruhen auf einer\n"
+" fehlerhaften PostFix Konfiguration. Um sie zu\n"
+" beheben m眉ssen Sie 鈥瀖yhostname鈥 oder 鈥瀖ydomain鈥淺n"
+" in 鈥/etc/postfix/main.cf鈥 korrigieren.\n"
+"\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Einstellung: "
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"S脛MTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
+"auf Laufwerk %s gehen dabei verloren"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Anfangssektor: "
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Es steht auf Ihrem System nicht gen眉gend Speicherplatz f眉r die \n"
+"Installation bzw. Aktualisierung zur Verf眉gung (%d > %d)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Erzeuge eine neue Partition"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Jeder Drucker ben枚tigt einen Namen (etwa 鈥濪rucker鈥).\n"
+"Beschreibung und Standort m眉ssen nicht ausgef眉llt werden.\n"
+"Sie dienen nur als Kommentare f眉r den Anwender."
-#: ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"鈥%s鈥: Durch Anwahl der Schaltfl盲che 鈥%s鈥 startet den Druckerassistenten.\n"
+"Weitere Informationen zu diesem Assistenten erhalten Sie im Drucker-Kapitel\n"
+"des 鈥濻tarter Handbuch鈥. Das dort vorgestellte Programm entspricht dem\n"
+"w盲hrend der Installation angebotenen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
+msgid "Bhutan"
+msgstr "Butan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove from LVM"
-msgstr "L枚schen aus dem LVM"
+msgid "Network interface"
+msgstr "Netzwerkkarte"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "L枚schen aus dem RAID"
+msgid "Reading printer data..."
+msgstr "Lesen der Treiber-Datenbank ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Zum LVM hinzuf眉gen"
+msgid "Korean keyboard"
+msgstr "Korea"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Add to RAID"
-msgstr "Zum RAID hinzuf眉gen"
+msgid "Not connected"
+msgstr "Nicht Verbunden"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatieren"
+msgid "Greek"
+msgstr "Griechenland"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Ausf眉hrliche Informationen"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Ich Versuche, die Partitionstabelle zu retten"
+msgid "Saint Kitts and Nevis"
+msgstr "St. Kitts und Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-"Legen Sie eine Diskette in das Laufwerk\n"
-"Alle Daten auf dieser Diskette werden gel枚scht!"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Warning"
-msgstr "Warnung"
+msgid "Enable OF Boot?"
+msgstr "Open Firmware Start erlauben"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select file"
-msgstr "Datei ausw盲hlen"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr ""
+"Sie k枚nnen JFS nicht f眉r Partitionen verwenden, die kleiner als 16MB sind!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor Vert. Frequenz: %s\n"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "path"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount point"
+msgstr "Einh盲ngpunkt"
+
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe Gr枚脽e\n"
-"Soll trotzdem fortgefahren werden?"
+"Es trat ein Fehler auf:\n"
+"%s\n"
+"Versuchen Sie, einen Parameter zu 盲ndern."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch Einh盲ngen"
+msgid "Restore system"
+msgstr "System wiederherstellen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Das sind die Rechner und Netzwerke, f眉r die die lokalen Drucker zug盲nglich "
+"sein sollen:"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
+msgid "Another one"
+msgstr "Anderer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
+msgid "Drakbackup"
+msgstr "DrakBackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
+msgid "Colombia"
+msgstr "Kolumbien"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Um mehr Partitionen einrichten zu k枚nnen, m眉ssen Sie zun盲chst eine Partition "
-"l枚schen und anschlie脽end eine erweiterte Partition erzeugen"
+"Aktuelle Konfiguration von 鈥%s鈥:\n"
+"\n"
+"Netzwerk: %s\n"
+"IP-Adresse: %s\n"
+"IP-Eigenschaften: %s\n"
+"Treiber: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ich kann keinen weiteren Partitionen hinzuf眉gen"
+msgid "Plug'n Play"
+msgstr "Plug'n'Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle Prim盲rpartitionen sind in Gebrauch"
+msgid "Reunion"
+msgstr "R茅union"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
+msgid "Details"
+msgstr "Details"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Aus Sicherheitsgr眉nden wird die Verbindung nun unterbrochen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Clear all"
-msgstr "Alles l枚schen"
+msgid "Synchronization tool"
+msgstr "Synchronisationsprogramm"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "M枚chten Sie die vorgenommenen 脛nderungen in 鈥/etc/fstab鈥 speichern?"
+msgid "Checking your system..."
+msgstr "Untersuchung Ihres Rechners ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
+msgid "Print"
+msgstr "Drucken"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
+msgid "Mongolia"
+msgstr "Mongolei"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
+msgid "Mounted\n"
+msgstr "Eingeh盲ngt\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafikumgebung"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
+msgid "Restore Users"
+msgstr "Benutzerkennzeichen wiederherstellen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Schl眉ssel"
+
+#: ../../services.pm:1
#, c-format
-msgid "Undo"
-msgstr "R眉ckg盲ngig"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
+"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
+"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
+"aktiviert sein."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Exit"
-msgstr "Verlassen"
+msgid "Detected hardware"
+msgstr "Gefundene Hardware"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "W盲hlen Sie eine Partition"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "W盲hlen Sie eine andere Partition"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmesien)"
-#: ../../diskdrake/removable.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Change type"
-msgstr "Typ 盲ndern"
+msgid "Enabling swap partition %s"
+msgstr "Swap Partition 鈥%s鈥 aktivieren"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Search servers"
-msgstr "Server suchen"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Sie haben keine FAT Partition, die ich als Loopback verwenden kann\n"
+"(m枚glicherweise haben Sie auch einfach nur nichtmehr gen眉gend\n"
+"freien Speicher)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Domain"
-msgstr "Dom盲ne"
+msgid "Armenian (old)"
+msgstr "Armenien (alt)"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Username"
-msgstr "Benutzerkennzeichen"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Es existiert bereits ein Drucker mit Namen 鈥%s鈥 unter %s.\n"
+"Durch bet盲tigen der Schaltf盲che 鈥灻渂ertragen鈥 k枚nnen Sie ihn\n"
+"眉berschreiben. Sie k枚nnen dem Drucker auch einen neuen \n"
+"Namen geben oder ihn einfach 眉berspringen."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Bitte geben Sie Benutzerkennzeichen, Passwort und Dom盲ne des Rechners an."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Dom盲nen-Authentifizierung n枚tig"
+msgid ", host \"%s\", port %s"
+msgstr ", Rechner 鈥%s鈥, Port %s"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Another one"
-msgstr "Anderer"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Which username"
-msgstr "Benutzerkennzeichen"
+msgid "%s formatting of %s failed"
+msgstr "%s formatieren von %s schlug Fehl"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ich kann mich unter 鈥%s鈥 nicht anmelden! Stimmt das Passwort?"
+msgid "Partitioning failed: %s"
+msgstr "Das Partitionieren schlug Fehl: %s"
-#: ../../harddrake/data.pm:1
+# ../../standalone/drakxtv_.c:37莽
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "cpu # "
-msgstr "CPU #"
+msgid "Canada (cable)"
+msgstr "Kanada (Kabel)"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-Controller"
+msgid "Upgrade"
+msgstr "Aktualisierung"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-Controller"
+msgid "Workstation"
+msgstr "Arbeitsplatzrechner"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-Controller"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installiere Paket %s\n"
+"%d%%"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kyrgyzstan"
+msgstr "Kirgisistan"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "USB-Controller"
+msgid "With basic documentation"
+msgstr "Mit minimaler Dokumentation (Empfohlen)"
-#: ../../harddrake/data.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-Controller"
+msgid "Anacron is a periodic command scheduler."
+msgstr ""
+"Mit dem Dienst anacron k枚nnen cron-Prozesse auch zu anderen als den \n"
+"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
+"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr l盲uft, da sonst \n"
+"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
+"werden sollten, nie ausgef眉hrt w眉rden."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Sie brauchen eine Verzeichnisbaumwurzel.\n"
+"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
+"W盲hlen Sie 鈥濫inh盲ngpunkt鈥 und setzen Sie ihn auf 鈥/鈥"
-#: ../../harddrake/data.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Scanner"
-msgstr "Scanner"
+msgid "Proxy should be http://..."
+msgstr "Proxy muss 鈥瀐ttp://...鈥 sein"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Unbekannt/Andere"
+msgid "South Africa"
+msgstr "S眉dafrika"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Western Sahara"
+msgstr "Westsahara"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modem"
-msgstr "Modems"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Netzwerkkarten"
+msgid "Modify printer configuration"
+msgstr "Drucker-Konfiguration 盲ndern"
-#: ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Processors"
-msgstr "Prozessoren"
+msgid "Choose a partition"
+msgstr "W盲hlen Sie eine Partition"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcams"
+msgid "Edit current rule"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Soundcard"
-msgstr "Soundkarten"
+msgid "%s"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Andere Multimedia Ger盲te"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "TV-Karten"
+msgid "Please test the mouse"
+msgstr "Bitte testen Sie Ihre Maus"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Videocard"
-msgstr "Videokarten"
+msgid "Other Media"
+msgstr "Anderes Medium"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tape"
-msgstr "Bandlaufwerke"
+msgid "Backup system files"
+msgstr "Systemdateien sichern"
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MausMan/FirstMaus (Seriell)"
-#: ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-Brenner"
+msgid "Sector"
+msgstr "Sektor"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CD-ROMs"
+msgid "Qatar"
+msgstr "Quatar"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Disk"
-msgstr "Festplatten"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Zip"
-msgstr "ZIPs"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Sie k枚nnen dieses Paket nicht ausw盲hlen, da Sie nicht genug Plattenplatz "
+"haben."
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Erstellen einer Auto-Installationsdiskette"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Floppy"
-msgstr "Diskettenlaufwerke"
+msgid "Dialing mode"
+msgstr "Wahlmodus"
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr ""
+msgid "File sharing"
+msgstr "Gemeinsamer Dateizugriff"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Driver:"
-msgstr "Treiber:"
+msgid "Clean /tmp at each boot"
+msgstr "Die Partition /tmp bei jedem Systemstart s盲ubern"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Please choose your type of mouse."
+msgstr "Bitte w盲hlen Sie Ihren Maustyp."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+msgid "class of hardware device"
+msgstr "Hardwareklasse"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
+"Das sind die Rechner und Netzwerke, f眉r die die lokalen Drucker zug盲nglich "
+"sein sollen:"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Fehler: Es gibt keinen bekannten Treiber f眉r Ihre Soundkarte (%s)"
+msgid "United Kingdom"
+msgstr "Gro脽britannien"
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr "Unbekannter Treiber"
+msgid "running"
+msgstr "aktiv"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Es gibt keinen bekannten Treiber f眉r Ihre Soundkarte (%s)"
+msgid "default"
+msgstr " Standard "
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Kein bekannter Treiber"
+msgid "Indonesia"
+msgstr "Indonesien"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Es existiert kein freier Treiber f眉r Ihre Soundkarte (%s), aber es gibt "
-"einen propriet盲ren Treiber unter \"%s\"."
+msgid "France [SECAM]"
+msgstr "Frankreich (SECAM)"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No open source driver"
-msgstr "Kein OpenSource Treiber"
+msgid "restrict"
+msgstr "Einschr盲nken"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... ich richte die Konfiguration ein"
+msgid "must have"
+msgstr "unbedingt notwendig"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
+"CUPS unterst眉tzt keine Druker an Novel Servern oder Drucker, die ihre Daten "
+"in ein frei gew盲hltes Kommando senden.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Fehlerbehandlung"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+msgid "Command line"
+msgstr "Kommandozeile"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"\n"
-"\n"
-"Ihre Karte verwendet momentan den %s 鈥%s鈥 Treiber (Voreinstellung f眉r Ihre "
-"Karte ist 鈥%s鈥)"
+"Unser komplettes Angebot an Linux-L枚sungen, sowie Sonderangebote und "
+"Fanartikel sind in unseremm e-Store erh盲ltlich:"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to administrative files"
+msgstr "Zugriff auf Verwaltungsdateien"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-"Hier k枚nnen Sie einen alternativen Treiber (entweder OSS odr ALSA) f眉r Ihre "
-"Soundkarte (%s) ausw盲hlen"
+"Sendmail Fehler\n"
+" Ihre Bericht-Mail konnte nicht versandt werden.\n"
+" Bitte richten Sie Sendmail ein."
-#: ../../harddrake/sound.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Sound Konfiguration"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", Multifunktionsger盲t am Parallelport \\#%s"
-#: ../../harddrake/sound.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Es existiert kein alternativer OSS/ALSA Treiber f眉r Ihre Soundkarte (%s), "
-"die momentan 鈥%s鈥 verwendet."
+"Argumente: (val)\n"
+"\n"
+"Setzen des Shell-Timeouts. 鈥0鈥 steht hier f眉r ohne Timeout."
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Kein alternativer Treiber"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "enable radio support"
-msgstr "Radiobetrieb aktivieren"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "Radiobetrieb:"
+msgid "Swap"
+msgstr "Auslagerung"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL-Einstellung:"
+msgid "Connecting to the Internet "
+msgstr "Mit dem Internet verbinden"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Anzahl der Puffer f眉r MMAP Aufnahmen"
+msgid "Restore Other"
+msgstr "Sonstiges wiederherstellen"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Anzahl der Aufnahmepuffer:"
+msgid "TV card"
+msgstr "TV-Karte"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tunertyp:"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Drucker an SMB/Windows 9x/ME/NT"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Card model:"
-msgstr "Kartentyp:"
+msgid ", "
+msgstr ", "
-#: ../../harddrake/v4l.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"F眉r die meisten modernen TV-Karten erkennt das bttv-Modul des Linux Kerns "
-"automatisch die richtigen Parameter.\n"
-"Falls Ihre Karte falsch erkannt wird, k枚nnen Sie Tuner- und Kartentyp hier "
-"eintellen. Geben Sie einfach die ben枚tigten Parameter an."
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Unbekannt|Generisch"
+msgid "Remove selected host/network"
+msgstr "L枚schen der markierte Rechner/Netzwerke"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Unbekannt|CPH06X (bt878) [Zahlreiche Hersteller]"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
+"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Unbekannt|CPH05X (bt878) [Zahlreiche Hersteller]"
+msgid "Disconnection from the Internet failed."
+msgstr "Die Verbindungstrennung schlug fehl!"
-#: ../../harddrake/v4l.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Autoerkennung"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Hier k枚nnen Sie die Taste, bzw Tastenkombination w盲hlen, \n"
+"mit der Sie zwischen verschiedenen Tastaturbelegugen \n"
+"umschalten k枚nnen, etwa zwischen deutschem und US-Layout."
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Do"
-msgstr "Los"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Netzwerk hotplugf盲hig"
-#: ../../interactive/stdio.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard 鈥%s鈥) "
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
+msgid "Restore From CD"
+msgstr "Von CD wiederherstellen"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-submit"
-msgstr "Erneut verschicken"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
+"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
+"\n"
+"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
+"mit DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
+"Anmerkung: Sie ben枚tigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
+"lokales Netz (LAN) aufsetzen k枚nnen."
-#: ../../interactive/stdio.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
-"=> Anmerkung: Ein Eintrag wurde ge盲ndert:\n"
-"%s"
+"Bitte w盲hlen Sie, 眉ber welches Netzwerkger盲t Sie die \n"
+"Internetverbindung herstellen wollen."
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
+
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
msgstr ""
-"Bitte w盲hlen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
-"oder bet盲gen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
+"MandrakeSoft arbeitet mit einer Reihe von Firmen zusammen, die "
+"professionelle Linux-L枚sungen anbieten, die Mandrake-kompatibel sind. Sie "
+"finden eine Liste im MandrakeStore."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Es gibt zahlreiche Auswahlm枚glichkeiten (%s).\n"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
-#: ../../interactive/stdio.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ihre Wahl? (Standard 鈥%s鈥 %s) "
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "Geben Sie 鈥瀡oid鈥 f眉en Leeren Eintrag an"
+msgid "Latin American"
+msgstr "Lateinamerika"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Drucksystem 盲ndern"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "M枚chten Sie diese Schaltfl盲che bet盲tigen?"
+msgid "Old device file"
+msgstr "Alte Ger盲tedatei"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Info: "
+msgstr "Info: "
#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "Schaltfl盲che 鈥%s鈥: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ihre Wahl? (0/1, Standard 鈥%s鈥) "
+msgid "Please wait"
+msgstr "Bitte warten"
-#: ../../interactive/stdio.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetMouse"
+msgstr "Genius NetMaus"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "None"
+msgstr "Keine"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Die eingegebene IP ist nicht korrekt.\n"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Ethernet Card"
+msgstr "Netzwerkkarte"
+
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Info"
+msgstr "Info"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
+msgid "Install"
+msgstr "Installation"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-"Angaben, die Sie machen m眉ssen:\n"
-"%s"
+"Bet盲tigen Sie die Schaltfl盲che 鈥%s鈥, wenn Sie alle Partitionen und die\n"
+"darauf befindlichen Daten l枚schen wollen. Bedenken Sie, dass Sie nach\n"
+"bet盲tigen der Schaltfl盲che auch an die m枚glicherweise noch vorhandenen\n"
+"Windows-Daten nicht mehr gelangen werden!\n"
+"\n"
+"W盲hlen Sie 鈥%s鈥, um die Aktion ohne Datenverlust abzubrechen."
-#: ../../modules/interactive.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Installation beenden"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Laden von Modul %s schlug Fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
+"Es wurde alles eingerichtet.\n"
+"Sie k枚nnen Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
+"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
+"teilen."
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Optionen angeben"
+msgid "Remote CUPS server"
+msgstr "CUPS-Server im Netzwerkbetrieb"
-#: ../../modules/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
+msgid "Sun - Mouse"
+msgstr "Sun - Maus"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"In einigen F盲llen ben枚tigt der 鈥%s鈥 Treiber zus盲tzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"眉berlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen F盲llen zum 鈥濰盲ngenbleiben鈥 des Rechners f眉hren, was "
-"jedoch keine Hardwaresch盲den nach sich ziehen sollte)"
+"Sie haben nur eine konfiguriertes Netzwerkger盲t an Ihrem Rechner:\n"
+"\n"
+"%s\n"
+"\n"
+"Ich setze ihr lokales Netz damit auf."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
+msgid "Minimal install"
+msgstr "Minimal-Installation"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modul-Optionen:"
+msgid "Ethiopia"
+msgstr "脛thiopien"
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie m眉ssen nun die Optionen f眉r Modul %s angeben.\n"
-"Optionen haben die Form 鈥瀗ame=wert name2=wert2鈥.\n"
-"Beispielsweise: 鈥瀒o=0x300 irq=7鈥"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
-"Sie k枚nnen nun die Optionen f眉r Modul %s angeben.\n"
-"Denken Sie daran, dass Adressen mit 鈥0x鈥 beginnen m眉ssen, etwa 鈥0x300鈥"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
+"- PCI Ger盲te: PCI-Slot, Ger盲t und Ger盲tetyp\n"
+"- EIDE Ger盲te: Master- oder Slave-Ger盲t\n"
+"- SCSI Ger盲te: Der SCSI-Bus und die Ger盲te-ID"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation des Treibers f眉r die Karte %s %s"
+msgid "Total size: %d / %d MB"
+msgstr "Gesamtgr枚脽e: %d / %d MB"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Hardware Informationen anzeigen"
+msgid "disabled"
+msgstr "deaktiviert"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Verf眉gen Sie 眉ber %s Schnittstellen?"
+msgid "Search for new scanners"
+msgstr "Suche nach neuen Scanern"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Verf眉gen Sie 眉ber weitere?"
+msgid "Disabling servers..."
+msgstr "Server deaktivieren ..."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Schnittstelle(n) %s %s gefunden"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Bitte w盲hlen Sie das Zeitintervall \n"
+"zwischen zwei Sicherungen."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Sie k枚nnen alle Modulparamerter hier einstellen."
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "comma separated strings"
-msgstr "durch Kommas getrennte Textfelder"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Ich kann 鈥瀖kinitrd -f /boot/initrd-%s.img %s鈥 nicht ausf眉hren."
-#: ../../modules/parameters.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "durch Kommas getrennte Nummern"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Sie haben die folgenden Server ausgew盲hlt: %s\n"
+"\n"
+"\n"
+"Diese Server werden standardm盲脽ig aktiviert. Sie haben keine bekannten\n"
+"Sicherheitsprobleme, jedoch k枚nnten einige neue entdeckt werden. Stellen\n"
+"Sie deshalb sicher, dass Sie diese Pakete so zeitig wie m枚glich "
+"aktualisieren.\n"
+"\n"
+"\n"
+"Wollen Sie diese Server wirklich installieren?\n"
-#: ../../modules/parameters.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d durch Kommas getrennte Textfelder"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netzwerkdrucker (TCP/Socket)"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d durch Kommas getrennte Nummern"
+msgid "Backup User files..."
+msgstr "Benutzerdateien sichern ..."
-#: ../../modules/parameters.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "a number"
-msgstr "eine Nummer"
+msgid "Install system"
+msgstr "System installieren"
-#: ../../network/adsl.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "First DNS Server (optional)"
+msgstr "Erster DNS Server (optional)"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"Der gebr盲uchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
-"Wenn Sie nicht wissen was Sie brauchen, w盲hlen Sie 鈥瀙ppoe verwenden鈥"
+"Alternativ k枚nnen Sie einen Ger盲te- oder Dateinamen in der Eingabezeile "
+"angeben"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
+msgid "dhcpd Config..."
+msgstr "DHCP Konfigurieren ..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "The setup has already been done, but it's currently disabled."
msgstr ""
+"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid "LILO/grub Installation"
+msgstr "LILO/Grub Installation"
-#: ../../network/adsl.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "DHCP verwenden"
+msgid "Israeli"
+msgstr "Israel"
-#: ../../network/adsl.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "use pptp"
-msgstr "PPTP verwenden"
+msgid "load setting"
+msgstr "Einstellungen laden"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "PPPOE verwenden"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Drucker 鈥%s鈥, auf Server 鈥%s鈥"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other ports"
-msgstr "Andere Ports"
+msgid "Floppy can be removed now"
+msgstr "Sie k枚nnen die Diskette nun entfernen"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimal-Installation"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alles (Keine Firewall)"
+msgid "Denmark"
+msgstr "D盲nemark"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Angabe eines ung眉ltigen Ports: 鈥%s鈥.\n"
-"Das Format lautet: 鈥瀙ort/tcp鈥 oder 鈥瀙ort/udp鈥, \n"
-"wobei Port eine Zahl zwischen 1 und 65535."
+msgid "Moving partition..."
+msgstr "Bewege Partition..."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Sie k枚nnen verschiedene Ports angeben. \n"
-"Korrekte Beispiele sind: 139/tcp 139/udp.\n"
-"F眉r weitere Informationen schauen Sie in 鈥/etc/services鈥."
+msgid "(This) DHCP Server IP"
+msgstr "(Diese) DHCP-Server IP"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Auf welche Dienste daf aus dem Internet zugegeriffenwerden?"
+msgid "Test of the configuration"
+msgstr "Pr眉fen der Einstellungen"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Installing %s ..."
+msgstr "Installiere %s ..."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"drakfirewall configurator\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"DrakFirewall Konfigurierer\n"
+"Schlussendlich erhalten Sie (falls Sie sich f眉r 鈥%s鈥 entschieden haben)\n"
+"eine Baumliste aller Pakete die zu den von Ihnen gew眉nschten Gruppen\n"
+"geh枚ren. Diese Pakete sind nach Gruppen und Untergruppen klassifiziert.\n"
+"Beim Durchst枚bern des Baums, k枚nnen Sie Gruppen, Untergruppen oder einzelne\n"
+"Pakete markieren oder deren Markierung entfernen.\n"
"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
-"mit DrakConnect eingerichtet haben, bevor Sie fortfahren."
+"Sobald Sie ein Paket ausw盲hlen, erscheint rechts eine kurze Beschreibung.\n"
+"Sobald Sie die Auswahl abgeschlossen haben, best盲tigen Sie das durch\n"
+"Dr眉cken der Schaltfl盲che 鈥%s鈥. Nun beginnt die eigentliche Installation.\n"
+"Falls Sie eine Vielzahl von Paketen installieren wollen, k枚nnen Sie nun\n"
+"getrost einen Kaffee trinken gehen.\n"
+"\n"
+"!! Es kommt vor, dass Server- und Dienst-Pakete angew盲hlt wurden - entweder\n"
+"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
+"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
+"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
+"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
+"Distribution zusammengestellt wurde, keine Sicherheitsl眉cken oder Fehler in\n"
+"diesen Paketen bekannt waren, ist nat眉rlich nicht auszuschlie脽en, dass\n"
+"sp盲ter solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
+"hier die Rede ist, w盲hlen Sie sicherheitshalber lieber 鈥%s鈥. Falls Sie mit\n"
+"鈥%s鈥 antworten, werden die Dienste und Server installiert und stehen Ihnen\n"
+"nach der Installation standardm盲脽ig zur Verf眉gung. !!\n"
+"\n"
+"Die Option 鈥%s鈥 unterdr眉ckt nur die Warnungen, die erscheinen, wenn das\n"
+"Installationsprogramm Pakete automatisch markiert, um Paketabh盲ngigkeiten\n"
+"aufzul枚sen, wenn Sie ein Paket ausw盲hlen.\n"
+"\n"
+"Das kleine Diskettensymbol am unteren Rand der Liste erm枚glicht es Ihnen,\n"
+"die w盲hrend einer vorangegangenen Installation gespeicherte Paketauswahl\n"
+"erneut zu verwenden. Durch Bet盲tigen der Schaltfl盲che 枚ffnen Sie einen\n"
+"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
+"fr眉heren Installation enth盲lt. Um zu erfahren, wie Sie diese Diskette\n"
+"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
+"Installationsschrittes."
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose your filesystem encryption key"
+msgstr "W盲hlen Sie Ihren Dateisystem-Schl眉ssel (Passwort)"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"DrakFirewall Konfigurierer\n"
-"\n"
-"Hiermit konfigurieren Sie eine pers枚nliche Firewall f眉r diesen\n"
-"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-L枚sung interessiert sein, schauen Sie sich nach der speziell\n"
-"daf眉r entwickelten MandrakeSecurity Firewall Distribution um."
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "Keine Netzwerkkarte"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP und IMAP Server"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "E-Mailserver"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Dom盲nen-Namenserver (DNS)"
+msgid "(default value: %s)"
+msgstr " (Voreinstellung: %s)"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Webserver"
+msgid "Alternative test page (Letter)"
+msgstr "Alternative Testseite (US-Format - 鈥濴etter鈥)"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host name"
-msgstr "Rechnername"
+msgid "Choose an X server"
+msgstr "W盲hlen Sie einen X Server"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Rechnername"
+msgid "Swap partition size in MB: "
+msgstr "Gr枚脽e der Auslagerungspartition in MB: "
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring network"
-msgstr "Netzwerk konfigurieren"
+msgid "No changes to backup!"
+msgstr "Keine 脛nderungen zu sichern!"
-#: ../../network/ethernet.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formatiert\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Installationsklasse"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Drucker 鈥%s鈥 am SMB/Windows Server 鈥%s鈥"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
-"Bitte w盲hlen Sie, 眉ber welches Netzwerkger盲t Sie die \n"
-"Internetverbindung herstellen wollen."
+"\n"
+"- D盲mon (%s) enth盲lt:\n"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "W盲hlen Sie die Netzwerkkarte"
+msgid "%d comma separated numbers"
+msgstr "%d durch Kommas getrennte Nummern"
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Ich habe keine Ethernet-Netzwerkkarte finden k枚nnen, daher kanndieser "
-"Verbindungstyp nicht konfiguriert werden."
+"Der Dienst rusers erm枚glicht es Anwendern anderer Rechner \n"
+"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
+"gerade angemeldet sind."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Automatische Konfiguration der Schritte"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Welchen DHCP Klienten wollen Sie verwenden?\n"
-"Voreingestellt ist 鈥瀌hcp-client鈥"
+"Wollen Sie mehr 眉ber die Open Source Gemeinde wissen? Betreten Sie die Welt "
+"der Freien Software!"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ich konnte keine PCI ISDN-Karte finden.\n"
-"Bitte w盲hlen Sie im n盲chsten Men眉 eine aus."
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select data to backup..."
+msgstr "Bitte w盲hlen Sie die zu sichernden Daten..."
+
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Ich habe eine PCI ISDN-Karte gefunden, \n"
-"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
-"indem Sie im n盲chsten Men眉 eine ausw盲hlen."
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Welche der folgenden ist Ihre ISDN-Karte?"
+msgid "received"
+msgstr "Empfangen"
-#: ../../network/isdn.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguration"
+msgid "/File/_New"
+msgstr "/Datei/_Neu"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Abort"
-msgstr "Abbruch"
+msgid "The DNS Server IP"
+msgstr "Die IP des DNS-Servers"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Continue"
-msgstr "Fortfahren"
+msgid "IP Range End:"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"n盲chsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, m眉ssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
+msgid "High"
+msgstr "Hoch"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "I don't know"
-msgstr "Keine Ahnung"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Dieses Feld beschreibt das Ger盲t"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Drucker f眉r StarOffice/OpenOffice.org/GIMP hinzuf眉gen"
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA/PCMCIA"
+msgid "Local Printers"
+msgstr "Lokale Drucker"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp verwenden Sie?"
+msgid "Installation image directory"
+msgstr "Verzeichnis des Installationsabbildes"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Schnittstelle \"%s\" gefunden. Wollen Sie sie verwenden?"
+msgid "NIS Server"
+msgstr "NIS Server"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll f眉r den Rest der Welt"
+msgid "Spain"
+msgstr "Spanien"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokoll f眉r den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
+msgid "This user name has already been added"
+msgstr "Dieses Benutzerkennzeichen existiert bereits"
-#: ../../network/isdn.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Europ盲isches Protokoll"
+msgid "Choose a file"
+msgstr "W盲hlen Sie eine Datei"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europ盲isches Protokoll (EDSS1)"
+msgid "Apply"
+msgstr "Anwenden"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "/Drucker automatisch erkennen"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"W盲hlen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgef眉hrt sein, w盲hlen Sie 鈥濶icht aufgef眉hrt鈥"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Externes ISDN Modem"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN Karte"
+msgid "Belgium"
+msgstr "Belgien"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Netzwerk Konfigurationsassistent"
+msgid "Choose the window manager to run:"
+msgstr "W盲hlen Sie den Window-Manager, den Sie verwenden wollen:"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Alte Konfiguration (isdn4net)"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Neue Konfiguration (isdn-light)"
+msgid "First Time Wizard"
+msgstr "First Time Assistent"
-#: ../../network/isdn.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Welche ISDN Konfiguration wollen Sie durchf眉hren?\n"
-"\n"
-"* Die alte Konfiguration verwendet 鈥瀒sdn4net鈥. Sie \n"
-" enth盲llt m盲chtigere Werkzeuge, ist jedoch komplizierter \n"
-" einzurichten und nicht voll standardkonform.\n"
-"\n"
-"* Die neue Konfiguration mit 鈥瀒sdn-light鈥 ist \n"
-" verst盲ndlicher und standardkonformer, sie enth盲llt \n"
-" jedoch weniger Werkzeuge.\n"
-"\n"
-"Wir empfehlen die 鈥瀒sdn-light鈥 Variante.\n"
+"Es trat ein Fehler auf. Ich wei脽 jedoch nicht, wie ich damit sinnvoll \n"
+"umgehen soll. Sie k枚nnen fortfahren, jedoch auf eigenes Risiko!"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do nothing"
-msgstr "Tu nichts"
+msgid "please wait, parsing file: %s"
+msgstr "Einen Moment, ich durchsuche: %s"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Installiere RPM"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Pakistan"
+msgstr "Pakistan"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
+"Um mit Ihrem Lexmark-Tintenstrahldrucker drucken zu k枚nnen, ben枚tigen Sie "
+"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
+"com/). Klicken Sie auf den 鈥濪rivers鈥-Link. W盲hlen Sie dann das Druckermodell "
+"und geben Sie 鈥濴inux鈥 als Betriebssystem an. Sie erhalten die Treiber als "
+"RPM-Paket oder als Shellskript mit interaktiver grafischer Installation. Sie "
+"m眉ssen die Einrichtung nicht mit dem Lexmark-Klicktool vornehmen. Sie k枚nnen "
+"direkt nach der Lizenz auf 鈥濧bbruch鈥 dr眉cken. Drucken Sie dann die Druckkopf-"
+"Justierungsseiten mit 鈥瀕exmarkmaintain鈥 und justieren Sie damit den "
+"Druckkopf."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Title"
-msgstr "Titel"
+msgid "Permissions"
+msgstr "Berechtigungen"
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider name (ex provider.net)"
+msgstr "Name des Providers (z.B. provider.net) "
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Version: %s\n"
+msgstr "Version: %s\n"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Ihr Modem wird nicht durch das System unterst眉tzt.\n"
-"Schauen Sie unter http://www.linmodems.org"
+"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
+"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
+"Text-Installation versuchen. Dr眉cken Sie daf眉r <F1> w盲hrend dem \n"
+"Installationsstart und geben Sie 鈥瀟ext鈥 an der Eingabeaufforderung \n"
+"ein."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS Server (optional)"
+msgid "Use the Windows partition for loopback"
+msgstr "Auf der Windows Partition Loopbacks anlegen"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS Server (optional)"
+msgid "Armenian (typewriter)"
+msgstr "Armenien (Schreibmaschine)"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Domain name"
-msgstr "Name der Dom盲ne"
+msgid "Connection type: "
+msgstr "Verbindungstyp: "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Graphical interface"
+msgstr "Grafikumgebung"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skript-basiert"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
+msgid "India"
+msgstr "Indien"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Chad"
+msgstr "Tschad"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Login ID"
+msgid "Slovakia"
+msgstr "Slowakei"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonnummer"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Name der Verbindung"
+msgid "Cambodia"
+msgstr "Kambodscha"
-#: ../../network/modem.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Einwahl Parameter"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor Horiz. Frequenz: %s\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte w盲hlen Sie den seriellen Anschluss, an dem Ihr Modem h盲ngt."
+msgid "Path"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"W盲hrend der Konfiguration traten Fehler auf.\n"
-"Kontrollieren Sie Ihre Verbindung mit 鈥瀗et_monitor鈥 oder dem Mandrake "
-"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
-"die Konfguration starten."
+"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
+"aktiviert.\n"
+"Es ist m枚glich, dass der Start durch den Wechsel in eine h枚here "
+"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
+"Angriffspunkt darstellt.\n"
+"\n"
+"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfl盲che\n"
-"neu zu starten, um Probleme, die durch die 脛nderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
+"Drucker %s\n"
+"Was wollen Sie an diesem Drucker 盲ndern?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Add host"
+msgstr "Hinzuf眉gen eines Rechners"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"Herzlichen Gl眉ckwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-"Die Konfiguration wird nun in Ihr System integriert.\n"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"%s"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
+"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
+"Wenn Sie das erlauben, k枚nnen die Anwender Verzeichnisse in Konqueror oder "
+"Nautilus im Kontextmen眉 der entsprechenden Verzeichnisses freigeben.\n"
"\n"
-"%s"
+"Mit 鈥濨enutzerdefiniert鈥 k枚nnen Sie eine Einstellung pro Kennzeichen "
+"vornehmen.\n"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Das Netzwerk muss neu gestartet werden. Soll ich es neu starten?"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Bitte w盲hlen Sie, ob die Paketauswahl von Diskette geladen \n"
+"oder darauf gespeichert werden soll. Es handelt sich um das \n"
+"selbe Format, wie die unter 鈥瀉uto_install鈥 erzeugten Disketten."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Network configuration"
-msgstr "Netzwerk Konfiguration"
+msgid "China (broadcast)"
+msgstr "China (terrestrisch)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "M枚chten Sie die Verbindung bei Betriebssystemstart herstellen?"
+msgid "Use quota for backup files."
+msgstr "Quota f眉r Backup-Datei verwenden."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Drucker 鈥%s鈥 konfigurieren ..."
#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Internet-Verbindung"
-#: ../../network/netconnect.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte w盲hlen Sie, welche Verbindungsart\n"
-"ich versuchen soll.\n"
-"\n"
+"Laden von Modul %s schlug Fehl.\n"
+"Wollen Sie es erneut mit anderen Parametern versuchen?"
-#: ../../network/netconnect.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "W盲hlen Sie die Verbindung, die Sie konfigurieren wollen"
+msgid "Welcome to the Open Source world."
+msgstr "Willkommen in der Open Source Welt."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "Netzwerkkarte(n) gefunden"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnien-Herzegovina"
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN Verbindung"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"Sie ben枚tigen ein echtes GNU/Linux Dateisystem (Ext2/Ext3, ReiserFS, XFS "
+"oder JFS) f眉r diesen Einh盲ngpunkt.\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "cable connection detected"
-msgstr "Kabel Verbindung gefunden"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Sie m眉ssen einen Rechnernamen oder eine IP eingeben.\n"
-#: ../../network/netconnect.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kabel Verbindung"
+msgid "Netherlands"
+msgstr "Holland"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected"
-msgstr "gefunden"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Dateien 眉bertragen ..."
-#: ../../network/netconnect.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL Verbindung"
+msgid "Internal ISDN card"
+msgstr "Interne ISDN Karte"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "detected %s"
-msgstr "%s gefunden"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Es existiert kein alternativer OSS/ALSA Treiber f眉r Ihre Soundkarte (%s), "
+"die momentan 鈥%s鈥 verwendet."
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN Verbindung"
+msgid "Title"
+msgstr "Titel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem Verbindung"
+msgid "Install & convert Fonts"
+msgstr "Installiere und konvertiere Fonts"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected on port %s"
-msgstr "an Prot %s gefunden"
+msgid "WARNING"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normale Modem Verbindung"
+msgid "Installing bootloader"
+msgstr "Betriebssystemstarter installieren"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Ger盲teerkennung..."
+msgid "replay"
+msgstr "wiederholen"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Expertenmodus"
+msgid "detected %s"
+msgstr "%s gefunden"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Autoerkennung benutzen"
+msgid "Virgin Islands (U.S.)"
+msgstr "Jungfern-Inseln (U.S.)"
-#: ../../network/netconnect.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "W盲hlen Sie das Profil, dass eingestellt werden soll"
+msgid "Bad backup file"
+msgstr "Fehlerhafte Backup-Datei"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"What would you like to do?"
msgstr ""
-"Willkommen zum Netzwerk Konfigurationsassistent.\n"
+"Die Einrichtung einer gemeinsamen Internet-Verbindung wurde bereits "
+"durchgef眉hrt.\n"
+"Momentan ist sie deaktiviert.\n"
"\n"
-"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
-"Falls Sie keine Autodetektion w眉nschen, entfernen Sie bitte die Markierung.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchf眉hren, ist Ihr Netzwerk bereits\n"
-"konfiguriert. W盲hlen Sie 鈥濷K鈥, um diese Einstellung beizubehalten oder\n"
-"鈥濧bbruch鈥, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
+"Was wollen Sie tun?"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"\n"
-"\n"
-"\n"
-"Wir werden nun die Verbindung 鈥%s鈥 konfigurieren.\n"
-"\n"
-"\n"
-"W盲hlen Sie 鈥濷K鈥, um fortzufahren."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Wir werden nun die Verbindung 鈥%s鈥 konfigurieren."
+msgid "Pipe into command"
+msgstr "An ein Kommando weiterleiten"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetverbindung und -einrichtung"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Einige Hardware Komponenten Ihres Rechners ben枚tigen 鈥瀙ropriet盲re鈥淺n"
+"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Die Verbindung konfigurieren"
+msgid "Detecting devices..."
+msgstr "Ger盲teerkennung..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Disconnect"
-msgstr "Verbindung trennen"
+msgid "Click here to launch the wizard ->"
+msgstr "Hier starten Sie den Assistenten ->"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect"
-msgstr "Verbinden"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"You can reconfigure your connection."
msgstr ""
+"Beschreibung der Felder:\n"
"\n"
-"Sie k枚nnen Ihre Internetverbindung neu konfigurieren"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie k枚nnen eine Internetverbindung aufbauen oder die Verbindung neu "
-"konfigurieren"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "Herstellername des Ger盲ts"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Sie sind momentan nicht mit dem Internet verbunden."
+msgid "Refreshing printer data..."
+msgstr "Aktualisieren der Druckerdaten ..."
-#: ../../network/netconnect.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie k枚nnen die Verbindung trennen oder sie neu konfigurieren."
+msgid "You must also format %s"
+msgstr "Sie m眉ssen auch %s formatieren."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Sie sind momentan mit dem Internet verbunden."
+msgid "Be careful: this operation is dangerous."
+msgstr "Vorsicht: Diese Aktion ist gef盲hrlich."
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Die URL muss mit 鈥瀐ttp://鈥 oder 鈥瀎tp://鈥 beginnen"
+msgid "Insert a floppy containing package selection"
+msgstr ""
+"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
-#: ../../network/network.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy muss 鈥瀐ttp://...鈥 sein"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/network.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP Proxy"
+msgid "Security Alerts:"
+msgstr "Sicherheitswarnungen:"
-#: ../../network/network.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP Proxy"
+msgid "Sweden"
+msgstr "Schweden"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Die IP Adresse des Gateways sollte etwa die Form 鈥192.168.1.42鈥 haben!"
+msgid "Poland"
+msgstr "Polen"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr ""
-"Die IP Adresse des DNS-Servers sollte etwa die Form 鈥192.168.1.42鈥 haben!"
+msgid "Importance: %s\n"
+msgstr "Wichtigkeit: %s\n"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gateway device"
-msgstr "Gateway Ger盲t"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Geben Sie an, ob sie Ihr Band nach dem Backup auswerfen wollen."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (etwa %s)"
+msgid "Other ports"
+msgstr "Andere Ports"
-#: ../../network/network.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNS-Server"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Anzahl der Puffer f眉r MMAP Aufnahmen"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa 鈥瀖einrechner.meineabteilung.meinefirma.de鈥.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
+msgid "SMBus controllers"
+msgstr "SMBus-Controller"
-#: ../../network/network.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Die Rate sollte entweder eine Mengengeneinheit aus 鈥歬鈥, 鈥歁鈥 und 鈥欸鈥 nutzen "
-"(etwa 鈥11M鈥 f眉r 11M) oder die entsprechende Anzahl Nullen angeh盲ngt werden."
+msgid "Connection timeout (in sec)"
+msgstr "VerbindungsTimeout (in Sec)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Die Frequenz sollte entweder eine Mengengeneinheit aus 鈥歬鈥, 鈥歁鈥 und 鈥欸鈥 "
-"nutzen (etwa 鈥2.46G鈥 f眉r 2,46GHz) oder die entsprechende Anzahl Nullen "
-"angeh盲ngt werden."
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP Adresse sollte etwa die Form 鈥192.168.1.42鈥 haben!"
-
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Beim BS-Start aktivieren"
+msgid "Croatian"
+msgstr "Kroatien"
-#: ../../network/network.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Sie m眉ssen einen Rechnernamen oder eine IP eingeben.\n"
+msgid "Use existing partition"
+msgstr "Verwende existierende Partition(en)"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Netzwerk hotplugf盲hig"
+msgid "Unable to contact mirror %s"
+msgstr "Ich kann nicht forken: %s"
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Netzwerkkarten-ID 眉berwachen (sinnvoll f眉r Laptops)"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Rechnername"
+msgid "/Help/_About..."
+msgstr "/Hilfe/_脺ber ..."
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Netmask"
-msgstr "Netzmaske"
+msgid "Remove user directories before restore."
+msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP Adresse"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Sie wollen einen entfernten Drucker einrichten. Sie ben枚tigen daf眉r ein "
+"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
+"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
+"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-#: ../../network/network.pm:1
-#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(BOOTP/DHCP/ZEROCONF)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Konfiguration des gemeinsamen Zugriffes auf CUPS-Drucker"
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automatische IP-Adressen Zuweisung"
+msgid "could not find any font in your mounted partitions"
+msgstr "Ich konnte keine Schriften in Ihren eingeh盲ngten Partitionen finden"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (driver %s)"
-msgstr " (Treiber %s)"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurieren der Netzwerkkarte %s"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa 鈥192.168.1.42鈥)."
+"Welchen DHCP Klienten wollen Sie verwenden?\n"
+"Voreingestellt ist 鈥瀌hcp-client鈥"
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WARNUNG: Dieses Ger盲t wurde bereits zum Herstellen einer Internetverbindung "
-"konfiguriert.\n"
-"Dr眉cken Sie einfach 鈥濷K鈥, um die Einstellungen zu behalten.\n"
-"Fall Sie Felder ver盲ndern, wird die Konfiguration 眉berschrieben."
+msgid "Domain Name:"
+msgstr "Name der Dom盲ne:"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
-"M枚glicherweise m眉ssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
+msgid "On Floppy"
+msgstr "Auf Diskette"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
+msgid "Restore"
+msgstr "Wiederherstellen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Passwort"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Kennzeichen (Login)"
+msgid "Looking for available packages..."
+msgstr "Suche nach vorhandenen Paketen..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "VerbindungsTimeout (in Sec)"
+msgid "Init Message"
+msgstr "Init Nachricht"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
+msgid "Rescue partition table"
+msgstr "Partitionstabelle retten"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Dialing mode"
-msgstr "Wahlmodus"
+msgid "Connection complete."
+msgstr "Verbindung fertiggestellt."
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Land ausw盲hlen"
+msgid "Cyprus"
+msgstr "Zypern"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
+msgid "Remove from RAID"
+msgstr "L枚schen aus dem RAID"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
+msgid "Configuration Wizards"
+msgstr "Konfigurationsassistenten"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
+msgid "ISDN connection"
+msgstr "ISDN Verbindung"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
+msgid "primary"
+msgstr "Prim盲r"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "Karten IO_1"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "auf SMB/Windows-Server 鈥%s鈥, Freigabe 鈥%s鈥"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Karten IO_0"
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Als n盲chstes k枚nnen Sie die Dienste ausw盲hlen, die w盲hrend des\n"
+"Betriebssystemstarts aktiviert werden sollen.\n"
+"\n"
+"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
+"zur Verf眉gung stehen, angezeigt. Lesen Sie diese Liste sorgf盲ltig durch und\n"
+"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur Verf眉gung\n"
+"haben wollen.\n"
+"\n"
+"Wenn Sie einen Dienst anw盲hlen, erhalten Sie eine kurze Erkl盲rung dazu.\n"
+"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
+"nicht, ver盲ndern Sie am Besten die voreingestellten Markierungen nicht.\n"
+"\n"
+"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so m眉ssen Sie an\n"
+"dieser Stelle besonders vorsichtig sein: w盲hlen Sie alle Dienste ab, die\n"
+"Sie nicht ben枚tigen. Denken Sie daran, dass etliche Dienste eine\n"
+"potentielle Einbruchstelle in das System von au脽en darstellen, wenn diese\n"
+"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
+"wirklich brauchen! !!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Karten E/A"
+msgid "Skip"
+msgstr "脺berspringen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Karten IRQ"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Dieser Dienst aktiviert Netzwerkger盲te (etwa Netzwerkkarten), die \n"
+"so konfiguriert wurden, dass sie ab dem Systemstart zur Verf眉gung \n"
+"stehen sollen."
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Please fill or check the field below"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Bitte f眉llen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
+"Die CPU-Frequenz in MHz (Megaherz), sie gibt eine erste N盲herung f眉r die "
+"anzahl Befehle, die der Prozessor pro Sekunde ausf眉hren kann."
-#: ../../network/tools.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
+msgid "important"
+msgstr "wichtig"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Total Progress"
+msgstr "Fortschritt"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
-"Das System scheint nicht mit dem Internet verbunden zu sein.\n"
-"Versuchen Sie noch einmal Ihre Verbindung konfigurieren."
+"鈥濪rakX鈥 versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
+"Anderem sucht 鈥濪rakX鈥 auch nach PCI-SCSI-Karten, die es kennt, um sie\n"
+"automatisch mit dem richtigen Treiber einzubinden.\n"
+"\n"
+"Falls 鈥濪rakX鈥 nicht wei脽, welcher Treiber funktioniert, werden Sie gebeten,\n"
+"鈥濪rakX鈥 zu helfen.\n"
+"\n"
+"Falls 鈥濪rakX鈥 nicht in der Lage ist, die Parameter selbst zu finden, die\n"
+"dem Modul zu 眉bergeben sind, m眉ssen Sie diese angeben.\n"
+"\n"
+"Sie k枚nnen die ben枚tigten Informationen etwa unter Windows (sofern das auf\n"
+"Ihren Rechner installiert ist) finden, aus den Handb眉chern, die sie mit dem\n"
+"Adapter erhalten haben oder von den Web-Seiten des Hardware-Anbieters\n"
+"(sofern Sie einen WWW-Zugang haben)."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Aus Sicherheitsgr眉nden wird die Verbindung nun unterbrochen."
+msgid "Users"
+msgstr "Benutzer"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Das System ist jetzt mit dem Internet verbunden."
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
+msgid "Preparing bootloader..."
+msgstr "Betriebssystemstarter vorbereiten..."
-#: ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "M枚chten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (etwa %s)"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet Konfiguration"
+msgid "The passwords do not match"
+msgstr "Die Passw枚rter stimmen nicht 眉berein"
-#: ../../partition_table/raw.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
+msgstr "Beispiele f眉r korrekte IPs:\n"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Frequency (MHz)"
+msgstr "Frequenz (MHz)"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene Integrit盲tstest schlug Fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu zuf盲lligen oder "
-"besch盲digten Daten f眉hren wird."
+"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
+"Installation bitte mit: 鈥瀊oot defcfg=floppy鈥"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (Default)"
-msgstr " (Standard)"
+msgid "the number of the processor"
+msgstr "die Nummer des Prozessors"
-#: ../../printer/cups.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Auf CUPS-Server 鈥%s鈥"
+msgid "Hardware clock set to GMT"
+msgstr "Hardware Uhr liefert GMT"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Netzwerkdrucker"
+msgid "Give a file name"
+msgstr "Dateinamen angeben"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Bitte w盲hlen Sie den Anschluss, an dem Ihr Drucker h盲ngt."
-#: ../../printer/cups.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
+msgid "Change Cd-Rom"
+msgstr "CD-ROM wechseln"
-#: ../../printer/cups.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Es gibt keinen bekannten Treiber f眉r Ihre Soundkarte (%s)"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "force"
+msgstr " mit Gewalt "
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Exit"
+msgstr "Verlassen"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
+"ANMERKUNG: Je nach Drucker und Drucksystem werden bis zu %d MB zus盲tzlicher "
+"Software auf Ihrem Rechner installiert."
-#: ../../printer/data.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
+msgstr ""
+"Sie haben noch keine Schnittstelle eingerichtet.\n"
+"Sie k枚nnen dies tun, indem Sie die Schaltfl盲che \n"
+"鈥濳onfigurieren鈥 bet盲tigen."
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Estonian"
+msgstr "Estland"
-#: ../../printer/data.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe k枚nnen Sie \n"
+"HTML-Dateien 眉ber HTTP publizieren. Der Server ist CGI-f盲hig."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Add/Del Clients"
+msgstr "Clients hinzuf眉gen/l枚schen"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Choose the network interface"
+msgstr "W盲hlen Sie die Netzwerkkarte"
#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "Unbekanntes Modell"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
+msgid "CD/DVD burners"
+msgstr "CD/DVD-Brenner"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partition wird standardm盲脽ig geladen\n"
+" (f眉r MS-DOS Boot, nicht jedoch f眉r LILO)\n"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Host %s"
-msgstr "Rechner %s"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Abbild-Datei ausw盲hlen"
-#: ../../printer/main.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Netzwerk %s"
+msgid "Firewalling configuration detected!"
+msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Schnittstelle: 鈥%s鈥"
+msgid "Connection name"
+msgstr "Name der Verbindung"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Local network(s)"
-msgstr "Lokale Netzwerke"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
+msgid "Updating package selection"
+msgstr "Erneuere Paket Auswahl"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", mittels Kommando 鈥%s鈥"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Wo wollen Sie die Loopback-Datei %s einh盲ngen?"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "auf dem Novell-Server 鈥%s鈥, Drucker 鈥%s鈥"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"Die Diskette wurde erfolgreich erstellt.\n"
+"Sie k枚nnen die Installation nun automatisch durchf眉hren."
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "auf SMB/Windows-Server 鈥%s鈥, Freigabe 鈥%s鈥"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "die Nummer des Prozessors"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP Drucker 鈥%s鈥, Port %s"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
+"Bitte geben Sie das Verzeichnis (oder Modul) an,\n"
+" in dem die Archive auf diesem Rechner erstellt werden sollen."
-#: ../../printer/main.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "auf LDP-Server 鈥%s鈥, Drucker 鈥%s鈥"
+msgid "Replay"
+msgstr "Erneut abspielen"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", printing to %s"
-msgstr ", drucken auf %s"
+msgid "Backup other files"
+msgstr "Andere Dateien sichern"
-#: ../../printer/main.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", Multifunktionsger盲t"
+msgid "No floppy drive available"
+msgstr "Kein Disketten-Laufwerk verf眉gbar"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", Multifunktionsger盲t am HP JedDirect"
+msgid "Backup files are corrupted"
+msgstr "Die Sicherungen sind besch盲digt."
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", USB Multifunktionsger盲t"
+msgid "TV norm:"
+msgstr "Fernsehnorm:"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", Multifunktionsger盲t am Parallelport \\#%s"
+msgid "Cpuid family"
+msgstr "CPUID Familie"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB-Drucker"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB-Drucker \\#%s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litauen (AZERTY - neu)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " an Parallelport \\#%s"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Lokale Drucker"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
+"ausgew盲hlt. \n"
+"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
+"鈥/boot鈥-Partition arbeiten. Stellen Sie sicher, dass Sie eine solche \n"
+"Partition erstellen."
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
+msgid "Previous"
+msgstr "<- Zur眉ck"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
+msgid "Other OS (MacOS...)"
+msgstr "Anderes Betriebssystem (MacOS ...)"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare Server"
+msgid "To activate the mouse,"
+msgstr "Um Ihre Maus zu aktivieren:"
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
+msgid "Bringing up the network"
+msgstr "Netzwerkverbindung herstellen"
-#: ../../printer/main.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netzwerkdrucker (TCP/Socket)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Die Bildschirm-Schnappsch眉sse liegen nach der Installation unter 鈥%s鈥"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Drucker an LPD-Server im Netzwerk"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Es wurde mehr als eine Windows-Partition gefunden. W盲hlen Sie bitte, welche\n"
+"Sie verkleinern wollen, um Platz f眉r Ihr neues Mandrake Linux zu schaffen.\n"
+"\n"
+"Die Partitionen werden folgenderma脽en aufgelistet: 鈥濴inux-Name鈥,\n"
+"鈥濿indows-Name鈥, 鈥濳apazit盲t鈥.\n"
+"\n"
+"鈥濴inux-Name鈥 hat folgende Struktur: 鈥濬estplattentyp鈥, 鈥濬estplattennummer鈥,\n"
+"鈥濸artitionsnummer鈥 (etwa 鈥瀐da1鈥).\n"
+"\n"
+"鈥濬estplattentyp鈥 ist 鈥瀐d鈥, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
+"鈥瀞d鈥, wenn es sich um eine SCSI-Platte handelt.\n"
+"\n"
+"鈥濬estplattennummer鈥 ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
+"IDE-Platten bedeutet:\n"
+"\n"
+" * 鈥瀉鈥 bedeutet 鈥濵aster-Platte am prim盲ren IDE-Controller鈥;\n"
+"\n"
+" * 鈥瀊鈥 bedeutet 鈥濻lave-Platte am prim盲ren IDE-Controller鈥;\n"
+"\n"
+" * 鈥瀋鈥 bedeutet 鈥濵aster-Platte am sekund盲ren IDE-Controller鈥;\n"
+"\n"
+" * 鈥瀌鈥 bedeutet 鈥濻lave-Platte am sekund盲ren IDE-Controller鈥;\n"
+"\n"
+"Bei SCSI-Platten steht 鈥瀉鈥 f眉r 鈥瀗iedrigste SCSI-ID鈥, 鈥瀊鈥 f眉r\n"
+"鈥瀦weitniedrigste SCSI-ID鈥, etc.\n"
+"\n"
+"鈥濿indows-Name鈥 ist der Buchstabe, den die Partition unter Windows erhalten\n"
+"w眉rde (die erste Partition der ersten Platte hei脽t 鈥濩:鈥)."
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
+msgid "Tanzania"
+msgstr "Tansania"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
+msgid "Computing FAT filesystem bounds"
+msgstr "Errechne die Grenzen des FAT Dateisystems"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local printer"
-msgstr "Lokaler Drucker"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Sicherungsquellen: \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Anwendungen konfigurieren ..."
+msgid "Content of the file"
+msgstr "Inhalt der Logb眉cher"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "PrinterDrake"
+msgid "Authentication LDAP"
+msgstr "LDAP Authentifizierung"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Drucker 鈥%s鈥 entfernen ..."
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "M枚chten Sie den Drucker 鈥%s鈥 wirklich entfernen?"
+msgid "Profile "
+msgstr "Profil "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Remove printer"
-msgstr "Drucker entfernen"
+msgid "transmitted"
+msgstr "Gesendet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Wie dieser Drucker genutzt werden kann"
+msgid "Palestine"
+msgstr "Pal盲stina"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Fehler beim Entfernen von 鈥%s鈥 f眉r StarOffice/OpenOffice.org/GIMP."
+msgid "%d comma separated strings"
+msgstr "%d durch Kommas getrennte Textfelder"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr ""
-"Der Drucker 鈥%s鈥 wurde erfogrich f眉r StarOffice/OpenOffice.org/GIMP entfernt."
+msgid "Here is the full list of keyboards available"
+msgstr "Hier die Liste aller Tastaturen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Drucker f眉r StarOffice/OpenOffice.org/GIMP entfernen"
+msgid "Theme name"
+msgstr "Themenname"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Diesen Drucker f眉r StarOffice/OpenOffice.org/GIMP entfernen"
+msgid "/_Help"
+msgstr "/_Hilfe"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Fehler beim Hinzuf眉gen von 鈥%s鈥 f眉r StarOffice/OpenOffice.org/GIMP."
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Hier k枚nnen Sie einstellen, ob die Drucker, die an diesem Rechner h盲ngen, "
+"f眉r andere Rechner nutzbar sein sollen und falls ja, f眉r welche."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgid "the width of the progress bar"
msgstr ""
-"Der Drucker 鈥%s鈥 wurde erfogrich zu StarOffice/OpenOffice.org/GIMP "
-"hinzugef眉gt."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Drucker f眉r StarOffice/OpenOffice.org/GIMP hinzuf眉gen"
+msgid "Cook Islands"
+msgstr "Cook-Inseln"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Diesen Drucker f眉r StarOffice/OpenOffice.org/GIMP hinzuf眉gen"
+msgid "Formatting partition %s"
+msgstr "Formatiere Partition 鈥%s鈥"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker 鈥%s鈥 ist jetzt Ihr Standarddrucker鈥"
+msgid "Hostname required"
+msgstr "Rechnername n枚tig"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Default printer"
-msgstr "Standarddrucker"
+msgid "Unselect fonts installed"
+msgstr "Auswahl installierter Schriften zur眉cksetzen"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
+msgid "Cancel"
+msgstr " Abbruch "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Printer options"
-msgstr "Drucker-Optionen"
+msgid "Searching for configured scanners ..."
+msgstr "Suche nach eingerichteten Scannern ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
+msgid "Wheel"
+msgstr "Rad"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
+msgid "Videocard"
+msgstr "Videokarten"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Alten Drucker 鈥%s鈥 entfernen ..."
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tSicherungen verwenden 鈥瀟ar鈥 und 鈥瀊zip2鈥淺n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
+msgid "Remove Selected"
+msgstr "Markierte entfernen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
+msgid "/Autodetect _modems"
+msgstr "/_Modems automatisch erkennen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
+msgid "Remove printer"
+msgstr "Drucker entfernen"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Ausf眉hren!"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"WARNUNG!\n"
+"\n"
+"DrakX wird nun die Gr枚脽e Ihrer Windows Partition ver盲ndern.\n"
+"Seien Sie Vorsichtig: Diese Aktion ist gef盲hrlich. Falls Sie es noch\n"
+"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
+"scandisk (sowie m枚glicherweise defrag) unter Windows auf die Partition \n"
+"anzuwenden. Anschlie脽end k枚nnen Sie die Installation erneut starten.\n"
+"Sie sollten nat眉rlich generell Sicherheitskopien Ihrer Daten angelegt\n"
+"haben. Falls dies der Fall ist, k枚nnen Sie mit OK fortfahren."
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Close"
-msgstr "Schlie脽en"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Auf welche Dienste daf aus dem Internet zugegeriffenwerden?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Drucker %s\n"
-"Was wollen Sie an diesem Drucker 盲ndern?"
+"Herzlich willkommen zum E-Mail Benachrichtigungsassistenten.\n"
+"\n"
+"Hier k枚nnen Sie Ihr Benachrichtigungssystem einrichten.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration 盲ndern"
+msgid "Other"
+msgstr "Andere"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Drucker hinzuf眉gen"
+msgid "Default"
+msgstr "Standard"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Normaler Modus"
+msgid "Button 2 Emulation"
+msgstr "Emulation der 2. Taste"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Change the printing system"
-msgstr "Drucksystem 盲ndern"
+msgid "type1inst building"
+msgstr "Erzeuge 鈥瀟ype1inst鈥"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS Konfiguration"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
+msgid "choose image file"
+msgstr "Abbild-Datei ausw盲hlen"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Anzeigen aller entfernten CUPS-Drucker"
+msgid "X server"
+msgstr "X Server"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. F眉hren Sie einen "
-"Doppelklick auf einem aus, um ihn zu 盲ndern, als Standarddrucker zu "
-"verwenden oder Informtionen 眉ber ihn zu erhalten."
+msgid "Domain Admin User Name"
+msgstr "Name des Dom盲nenadministrators"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Printing system: "
-msgstr "Drucksystem: "
+msgid "There was an error while scanning for TV channels"
+msgstr "Bei der Suche der TV-Kan盲le trat ein Fehler auf"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software"
+msgid "US keyboard (international)"
+msgstr "Vereinigte Staaten von Amerika (international)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installieren des Pakets Foomatic ..."
+msgid "Not installed"
+msgstr "Nicht installiert"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konnte Drucker \"%s\" nicht konfigurieren!"
+msgid "LAN connection"
+msgstr "LAN Verbindung"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Drucker 鈥%s鈥 konfigurieren ..."
+msgid "/File/-"
+msgstr "/Datei/-"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Lesen der Treiber-Datenbank ..."
+msgid "Italian"
+msgstr "Italien"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
+msgid "Basic"
+msgstr "Einfach"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "W盲hlen Sie das Drucksystem"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Standarddrucker w盲hlen ..."
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Installiere %s ..."
+msgid "pdq"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Entferne %s ..."
+msgid "Card IO"
+msgstr "Karten E/A"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
-"aktiviert.\n"
-"Es ist m枚glich, dass der Start durch den Wechsel in eine h枚here "
-"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
-"Angriffspunkt darstellt.\n"
-"\n"
-"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim BS-Start aktivieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
-"zu installieren.\n"
"\n"
-"Dieses Drucksystem l盲uft als D盲mon (Hintergrundprozess), der auf "
-"Druckauftr盲ge wartet, um sie abzuarbeiten. Da der D盲mon auch f眉r andere "
-"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen m枚glichen "
-"Angriffspunkt. Aus Sicherheitsgr眉nden werden in dieser Sicherheitsebene "
-"standardm盲脽ig nur einige ausgew盲hlte D盲mons gestartet.\n"
-"\n"
-"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
+"Diese spezielle Start-Partition\n"
+"ist f眉r die Verwendung mehrerer\n"
+"Betriebssysteme auf dem selben\n"
+"Rechner.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Bitte w盲hlen Sie f眉r jeden Schritt, ob er wie bei Ihrer Installation "
+"vorgenommen werden soll, oder ob Sie ihn manuell durchf眉hren wollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Sie k枚nnen hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
+"diesem Rechner zur Verf眉gung gestellt werden sollen."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "paranoid"
-msgstr "Paranoid"
+msgid "\t-Network by FTP.\n"
+msgstr "\t- Netzwerk per FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "high"
-msgstr "Hoch"
+msgid "Russian (Yawerty)"
+msgstr "Russland (YaWERTY)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Drucksystem neu starten ..."
+msgid "You must enter a device or file name!"
+msgstr "Sie m眉ssen einen Ger盲te- oder Dateinamen eingeben!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration eines entfernten Druckers"
+msgid "/_Quit"
+msgstr "/_Beenden"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
-"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
-"und Ihre Softwareeinstellngen. Versuchen Sie anschlie脽end erneut den "
-"entfernten Drucker einzurichten."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafikkartenspeicher: %s KB\n"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-"Das von Ihnen w盲hrend der Installation eingerichtete Netzwerk kann jetzt "
-"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
-"Verf眉gung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
-"Kontrollzentrum unter 鈥濶etzwerk & Internet/Verbindung鈥. Versuchen Sie "
-"anschlie脽end erneut den Drucker mittels 鈥濰ardware/Drucker鈥渋m Kontrollzentrum "
-"einzurichten."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
+msgid "access to compilation tools"
+msgstr "Zugriff auf Compiler"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
+msgid "Please select data to restore..."
+msgstr "Bitte w盲hlen Sie die wiederherzustellenden Daten..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
-"Sie wollen einen entfernten Drucker einrichten. Sie ben枚tigen daf眉r ein "
-"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
-"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
-"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting network..."
-msgstr "Netzwerk starten ..."
+"Wenn Sie aboot verwenden wollen, m眉ssen Sie ausreichend Platz am Anfang \n"
+"der Platte lassen (2048 Sektoren reichen aus)."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Aktualisieren der Druckerdaten ..."
+msgid "Standard test page"
+msgstr "Standard-Testseite"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker (鈥%s鈥) 眉bertragen, soll es auch Ihr "
-"Standarddrucker unter dem neuen Drucksystem 鈥%s鈥 werden?"
+msgid "Create"
+msgstr "Erzeugen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung transferieren"
+msgid "What"
+msgstr "Was"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "脺bertragen von 鈥%s鈥 ..."
+msgid "There was an error ordering packages:"
+msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Neuer Druckername"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgarien (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker 鈥%s鈥 existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
+msgid "Disable Server"
+msgstr "Server deaktivieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
+msgid "Filesystem encryption key"
+msgstr "Dateisystem-Schl眉ssel"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Transfer"
-msgstr "脺bertragen"
+msgid "Gujarati"
+msgstr "Indien (Gujarati)"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Es existiert bereits ein Drucker mit Namen 鈥%s鈥 unter %s.\n"
-"Durch bet盲tigen der Schaltf盲che 鈥灻渂ertragen鈥 k枚nnen Sie ihn\n"
-"眉berschreiben. Sie k枚nnen dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach 眉berspringen."
+"Bitte w盲hlen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
+"oder bet盲gen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht 眉bertragen"
+msgid "Save theme"
+msgstr "Thema abspeichern"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Druckerwarteschlangen, die sie 眉bertragen wollen und "
-"bet盲tigen Sie die Schaltfl盲che 鈥灻渂ertragen鈥."
+msgid "group"
+msgstr "Gruppe"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
-"Treibern eingerichtet wurden, k枚nnen nicht 眉bertragen werden."
+msgid "Brazil"
+msgstr "Brasilien"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Warteschlangen, die nicht mit diesem Programm oder 鈥瀎oomatic-configure鈥 "
-"ertellt wurden, k枚nnen nicht 眉bertragen werden."
+msgid "Auto Install"
+msgstr "Auto-Installation"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterst眉keine IPP Drucker.\n"
+msgid "Network Configuration Wizard"
+msgstr "Netzwerk Konfigurationsassistent"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ unterst眉tzt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
-"Drucker.\n"
+msgid "Removable media automounting"
+msgstr "Wechselmedien automatisch Einh盲ngen"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS unterst眉tzt keine Druker an Novel Servern oder Drucker, die ihre Daten "
-"in ein frei gew盲hltes Kommando senden.\n"
+msgid "Printing"
+msgstr "Drucken"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Sie k枚nnen die Druckerkonfiguration, die Sie f眉r den Spooler 鈥%s鈥 "
-"vorgenommen haben f眉r 鈥%s鈥, ihren aktuellen Spooler, verwenden. Alle Daten "
-"(Name, Beschreibung, Standort, Verbindungsart und standard "
-"Optionseinstellungen) werden 眉bernommen, Druckjobs in der alten "
-"Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen k枚nnen 眉bernommen werden:\n"
+msgid "Unkown driver"
+msgstr "Unbekannter Treiber"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Ihr Drucker wurde automatisch so konfiguriert, dass Sie von Ihrem Rechner "
-"auf die Foto-Speicherkartenlaufwerke zugreifen k枚nnen. Sie k枚nnen jetzt "
-"entweder mit dem grafischen Programm MToolsFM (Menu: \"Programme\" -> "
-"\"Dateiwerkzeuge\" -> \"MTools File Manager\") oder auf der Kommandozeile "
-"mit den mtools (F眉r mehr Information geben Sie \"man mtools\" auf der "
-"Kommandozeile ein) auf die eingelegte Karte zugreifen. Sie finden das "
-"Dateisystem der Karte unter dem Laufwerksbuchstaben \"p:\" oder, wenn Sie "
-"mehr als einen HP-Drucker mit Foto-Speicherkartenlaufwerken haben, unter den "
-"nachfolgenden Buchstaben. In MToolsFM k枚nnen Sie zwischen den "
-"Laufwerksbuchstaben mit dem Feld 眉ber der oberen rechten Ecke der Dateiliste "
-"umschalten."
+"There are no printers found which are directly connected to your machine"
+msgstr "Ich konnte keine Drucker direkt an Ihrem Rechner finden."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr Multifunktionsger盲t wurde automatisch auch zum Scannen eingerichtet. Sie "
-"k枚nnen nun mit dem Befehl 鈥瀞canimage鈥 (鈥瀞canimage -d hp:%s鈥 um den Scanner "
-"auszuw盲hlen, falls Sie mehrere angeschlossen haben), eingegeben in der "
-"Kommandozeile, scannen. Wenn Sie eine grafisches Werkzeug verwenden wollen: "
-"鈥瀤scanimage鈥 bzw. 鈥瀤sane鈥. Sie k枚nnen auch den GIMP verwenden. W盲hlen Sie "
-"einfach im Men眉 鈥濪atei/Holen鈥 den entsprechenden Eintrag. Sie k枚nnen sich "
-"auch mittels 鈥瀖an scanimage鈥 bzw 鈥瀖an sane-hp鈥 in der Kommandozeile weitere "
-"Informationen ausgeben lassen.\n"
-"\n"
-"Verwenden Sie f眉r dieses Ger盲t nicht 鈥濻cannerDrake鈥!"
+msgid "Create a new partition"
+msgstr "Erzeuge eine neue Partition"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
+msgid "Driver:"
+msgstr "Treiber:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
+msgid "unknown"
+msgstr "Unbekannt"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker 鈥%s鈥"
+msgid "Use fdisk"
+msgstr "Fdisk verwenden"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Drucken/Fotokartenzugriff mit 鈥%s鈥"
+msgid "MOVE YOUR WHEEL!"
+msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drucken/Scannen mit 鈥%s鈥"
+msgid "sent: "
+msgstr "Gesendet: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Drucken/Scannen/Fotokarten mit 鈥%s鈥"
+msgid "Automatic IP"
+msgstr "Automatische IP-Adressen Zuweisung"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
-msgstr ""
-"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
-"die unten angegebene Liste oder bet盲tigen Sie die Schaltfl盲che 鈥濴iste der "
-"Drucker-Optionen鈥. %s%s\n"
+"The \"%s\" button shows two more buttons to:\n"
"\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
+"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
+"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart k枚nnen Sie\n"
+"zwischen den auf Ihrer Platte installierten Betriebssystemen ausw盲hlen.\n"
+"Klicken Sie nur noch auf 鈥%s鈥 und das System wird neu gestartet.\n"
"\n"
-"Die Befehle 鈥%s鈥 und 鈥%s鈥 erlauben es Ihnen ebenfals die Optionen eines "
-"spezeiellen Druckjobs zu konfigurieren. F眉gen Sie einfach die gew眉nschten "
-"Einstellungen in der Kommandozeile ein, etwa 鈥%s <Datei>鈥.\n"
+"Die Schaltfl盲che 鈥%s鈥 liefert zwei weitere Schaltfl盲chen:\n"
+"\n"
+" * 鈥%s鈥: Hiermit k枚nnen Sie eine Installationsdiskette erstellen, mit deren\n"
+"Hilfe Sie eine identische automatische Installation ohne Interaktion eines\n"
+"Administrators durchzuf眉hren k枚nnen.\n"
+"\n"
+" Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfl盲che\n"
+"aktiviert haben:\n"
+"\n"
+" * 鈥%s鈥: Diese Installation ist nur teilweise automatisch, da der\n"
+"Partitionierungsschritt (aber nur dieser!) immer noch interaktiv vonstatten\n"
+"geht.\n"
+"\n"
+" * 鈥%s鈥: Vollautomatische Installation: Die Festplatte wird vollst盲ndig\n"
+"reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
+"\n"
+" Diese Funktion ist besonders n眉tzlich, wenn man eine Menge von\n"
+"identischer Rechner einrichten will. Weitere Informationen erhalten Sie\n"
+"auch auf der Seite Auto install\n"
+"\n"
+" * 鈥%s鈥:(*) Sie speichern damit die Paketauswahl, die Sie vorher getroffen\n"
+"haben. Wenn Sie sp盲ter eine erneute Installation vornehmen wollen, legen\n"
+"Sie einfach die Diskette ins Laufwerk und starten Sie die Installation\n"
+"mittels [F1] an der ersten Eingabeaufforderung. Geben Sie dann 禄linux\n"
+"defcfg=\"floppy\"芦 ein.\n"
+"\n"
+"(*) Sie ben枚tigen eine FAT formatierte Diskette (Mittels 鈥瀖format a:鈥淺n"
+"k枚nnen Sie unter GNU/Linux eine solche erstellen)."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Sie k枚nnen auch das Grafikwerkzeug 鈥瀤pdq鈥 zum setzen der Optionen und "
-"Verwalten der Druckjobs verwenden.\n"
-"Falls Sie KDE als Arbeitsoberfl盲che nutzen, haben Sie eine Panik-Abschaltung "
-"in Forma des Arbeitsfl盲chensymbols 鈥濻TOP Printer!鈥, dass sofort alle "
-"Druckauftr盲ge anh盲, wenn Sie es bet盲gen. Das kann beispielsweise dann "
-"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Maus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie k枚nnen diesen Befehl auch im 鈥濪ruckkommando鈥-Feld vieler Programme "
-"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
-"erg盲nzt wird.\n"
+msgid "Configuration of a remote printer"
+msgstr "Konfiguration eines entfernten Druckers"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Verwenden Sie einen der Befehle 鈥%s <Datei>鈥 oder 鈥%s <Datei>鈥, um die Datei "
-"<Datei> in der Kommandozeile auszudrucken.\n"
+msgid "Moldova"
+msgstr "Moldawien"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, bet盲tigen "
-"Sie bitte die Schaltfl盲che 鈥濴iste der Drucker-Optionen鈥."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Geben Sie an, ob sie Ihr Band vor dem Backup l枚schen wollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-"\n"
-"Der Befehl 鈥%s鈥 erlaubt es Ihnen auch zahlreiche Einstellungen f眉r einen "
-"bestimmten Druckauftrag zu 盲ndern. Geben Sie die gew眉nschten Angaben einfach "
-"in der Kommandozeile mit an, etwa: 鈥%s <Datei>鈥. "
+"Eine Online-Plattform, die speziell auf die Bed眉rfnisse von Firmenkunden "
+"zugeschnitten wurde."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Verwenden Sie den Befehl 鈥%s <Datei>鈥, um die Datei <Datei> in der "
-"Kommandozeile auszudrucken.\n"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Die URL muss mit 鈥瀐ttp://鈥 oder 鈥瀎tp://鈥 beginnen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
-"\n"
+msgid "Add a new rule at the end"
+msgstr "Neue Regel am Ende hinzuf眉gen"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Sie k枚nnen diese Befehle auch in der 鈥濪ruck-Kommando鈥-Zeile des Druckdialogs "
-"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
-"die zu druckende Datei von der Anwendung geliefert wird.\n"
+"Sie k枚nnen hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
+"diesem Rechner zur Verf眉gung gestellt werden sollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Sie k枚nnen sowohl den Befehl 鈥%s <datei>鈥 verwenden, wenn Sie in einer "
-"Konsole die Datei 鈥<datei>鈥 drucken wollen, als auch ein grafisches "
-"Hilfsprogramm verwenden: 鈥瀤pp <datei>鈥 oder 鈥瀔printer <datei>鈥. Die "
-"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
-"Drucker zu w盲hlen und die notwendigen Druckerparameter anzugeben.\n"
+"Sie m眉ssen nun die Optionen f眉r Modul %s angeben.\n"
+"Optionen haben die Form 鈥瀗ame=wert name2=wert2鈥.\n"
+"Beispielsweise: 鈥瀒o=0x300 irq=7鈥"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
+msgid "Quit without writing the partition table?"
+msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
+msgid "Installing packages..."
+msgstr "Pakete Installieren ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "Keine Testseite(n) drucken"
+msgid "Dutch"
+msgstr "Niederlande"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo test page"
-msgstr "Foto-Testseite"
+msgid "The following packages need to be installed:\n"
+msgstr "Die folgenden Pakete m眉ssen installiert werden:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - 鈥濴etter鈥)"
+msgid "service setting"
+msgstr "Dienste einstellen"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Standard-Testseite"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print"
-msgstr "Drucken"
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Diese Datei wird bereits von einer anderen Loopback-Verkn眉pfung verwendet, "
+"w盲hlen Sie eine andere Datei."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Keine Testseiten"
+msgid "Read-only"
+msgstr "Nur lesbar"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Litauen"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Kein bekannter Treiber"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Bitte w盲hlen Sie, welche Testseiten Sie drucken wollen.\n"
+"Falls das nicht der Drucker ist, den Sie einrichten wollen, geben Sie einen "
+"Ger盲te- oder Dateinamen in der Eingabezeile an."
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"Bemerkung: Der Druck der Foto-Testseite dauert h盲ufig extrem lange. Bei "
-"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
-"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
-"auszudrucken."
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Test pages"
-msgstr "Testseiten"
+msgid "Configure Local Area Network..."
+msgstr "Netzwerk konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"M枚chten Sie diesen Drucker (鈥%s鈥)\n"
-"als Standarddrucker verwenden?"
+msgid "Launch the sound system on your machine"
+msgstr "Starten des Sound-Systems Ihres Rechners"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist yu gro脽 oder zu klein!"
+msgid "Preparing printer database..."
+msgstr "Vorbereiten der Drucker-Datenbank ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
+msgid "Information"
+msgstr "Informationen"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
+msgid "No network card"
+msgstr "Keine Netzwerkkarte"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Auswahl des Druckertyps"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "Welches Dateisystem wollen Sie verwenden?"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 Tasten"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "Ausf眉hrliche Informationen"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11901,506 +10882,421 @@ msgstr ""
"richtig eingestellt sind. Es sei auch angemerkt, dass h盲ufig mit steigender "
"Druckqualit盲t die Druckgeschwindigkeit sinkt."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "Diese Diskette ist nich FAT formatiert"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Um mit Ihrem Lexmark-Tintenstrahldrucker drucken zu k枚nnen, ben枚tigen Sie "
-"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
-"com/). Klicken Sie auf den 鈥濪rivers鈥-Link. W盲hlen Sie dann das Druckermodell "
-"und geben Sie 鈥濴inux鈥 als Betriebssystem an. Sie erhalten die Treiber als "
-"RPM-Paket oder als Shellskript mit interaktiver grafischer Installation. Sie "
-"m眉ssen die Einrichtung nicht mit dem Lexmark-Klicktool vornehmen. Sie k枚nnen "
-"direkt nach der Lizenz auf 鈥濧bbruch鈥 dr眉cken. Drucken Sie dann die Druckkopf-"
-"Justierungsseiten mit 鈥瀕exmarkmaintain鈥 und justieren Sie damit den "
-"Druckkopf."
+msgid "Configuring network"
+msgstr "Netzwerk konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark Tintenstrahl-Konfiguration"
+msgid "Graphic Card"
+msgstr "Grafikkarte"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Errechne die Grenzen des Windows Dateisystems"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider dns 1 (optional)"
+msgstr "Erster DNS des Providers (optional)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr "Kamerun"
+
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Der Lexmark Tintenstrahl-Druckertriber unterst眉tzt nur lokale Drucker, keine "
-"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schlie脽en "
-"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
-"ein, an den er angeschlossen ist."
+"Sie k枚nnen nun %s partitionieren.\n"
+"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
+"sobald Sie fertig sind."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
+msgid "Close"
+msgstr "Schlie脽en"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
-"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
-"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
-"Schnittstelle oder an einer Printserver-Box h盲ngen, schlie脽en Sie ihn bitte "
-"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
+"鈥%s鈥: 鈥%s鈥: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie sich\n"
+"befinden korrekt ist. Falls nicht, bet盲tigen Sie bitte die Schaltfl盲che\n"
+"鈥%s鈥 und w盲hlen Sie den richtigen. Ist Ihr Staat nicht in der Liste, die\n"
+"Sie gezeigt bekommen, k枚nnen Sie 眉ber die Schaltfl盲che 鈥%s鈥 eine\n"
+"vollst盲ndigere Liste erzwingen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker Konfiguration"
+msgid "Calendar"
+msgstr "Kalender"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"Falls Ihr Drucker nicht aufgef眉hrt ist w盲hlen Sie bitte ein kompatibles bzw "
-"盲hnliches Modell (F眉r Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"\n"
-"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
-"Falls die Markierung auf einem falschen Ger盲t oder auf 鈥濺ohdaten-Drucker鈥 "
-"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
+"Um einen LPD-Drucker im Netzwerk zu verwenden, m眉ssen Sie den Rechnernamen "
+"des Drucker-Servers sowie den Druckernamen auf diesem Server angeben, an den "
+"die Auftr盲ge 眉bertragen werden sollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "脺ber welchen Druckertyp verf眉gen Sie?"
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Auswahl des Druckertyps"
+msgid "consolehelper missing"
+msgstr "Das Programm 鈥瀋onsolehelper鈥 wurde nicht gefunden."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Lesen der Drucker-Datenbank ..."
+msgid "stopped"
+msgstr "gestoppt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select model manually"
-msgstr "Modell ausw盲hlen"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Das Modell ist richtig"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Baum erweitern"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"For your printer Printerdrake has found:\n"
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"%s"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
-"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
-"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
-"ist. Kontrollieren Sie, ob die Wahl korrekt ist und w盲hlen Sie die "
-"Schaltfl盲che 鈥濪as Modell ist richtig鈥, wenn der Treiber Ihren W眉n "
-"entspricht, andernfalls bet盲gen Sie 鈥濵odell ausw盲hlen鈥, um die Auswahl "
-"selbst vorzunehmen.\n"
-"\n"
-"Folgender Drucker wurde gefunden:\n"
-"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer model"
-msgstr "Ihr Druckermodell"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
+msgid "Expert Mode"
+msgstr "Expertenmodus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location"
-msgstr "Standort"
+msgid "Printer options"
+msgstr "Drucker-Optionen"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Description"
-msgstr "Beschreibung"
+msgid "Local Network adress"
+msgstr "Lokale Netzwerkadresse"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name of printer"
-msgstr "Druckername"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Sichern Ihrer Systemdateien (Verzeicnis /etc)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Jeder Drucker ben枚tigt einen Namen (etwa 鈥濪rucker鈥).\n"
-"Beschreibung und Standort m眉ssen nicht ausgef眉llt werden.\n"
-"Sie dienen nur als Kommentare f眉r den Anwender."
+"Sie haben nun die M枚glichkeit Pakete zu installieren, die seit Erscheinen\n"
+"der Distribution aktualisiert wurden. Es handelt sich um \n"
+"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
+"\n"
+"Allerdings ben枚tigen Sie daf眉r eine funktionierende Internertverbindung.\n"
+"\n"
+"M枚chten Sie die Aktualisierungen vornehmen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+msgid "Samba Server"
+msgstr "Samba Server"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> n盲chstes Element | <Leertaste> ausw盲hlen | <F12> weiter "
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen auf Ihrem HP Multifunktionsger盲t"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installiere mtools Pakete..."
+msgid "Subnet:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installiere SANE Pakete..."
+msgid "Zimbabwe"
+msgstr "Simbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installiere HPOJ Paket..."
+msgid "Please enter the host name or IP."
+msgstr "Rechnernamen oder IP eingeben."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "When"
+msgstr "Wann"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Eine Kommandozeile muss eigegeben werden!"
+msgid "Second DNS Server (optional)"
+msgstr "Zweiter DNS Server (optional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Command line"
-msgstr "Kommandozeile"
+msgid "Finland"
+msgstr "Finnland"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Pipe into command"
-msgstr "An ein Kommando weiterleiten"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Gefundendenes Modell: %s %s"
+msgid "Color depth: %s\n"
+msgstr "Farbtiefe: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Sie m眉ssen eine g眉ltige URI eingeben!"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr ""
+"Sie k枚nnen dieses Paket nicht aus der Auswahl entfernen. \n"
+"Es muss aktualisiert werden!"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
+msgid "Loading from floppy"
+msgstr "Laden von Diskette ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Sie k枚nnen hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
-"bzw. den Foomatic Spezifikationen gen眉gen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterst眉tzt werden."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Rechnername/IP des Druckers"
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Die Port Nummer muss eine ganze Zahl sein!"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Der Rechnername, bzw die IP-Adresse des Druckers fehlt!"
+msgid "Slovenia"
+msgstr "Slowenien"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"Enter a user\n"
+"%s"
msgstr ""
-"Um einen TCP- oder Socket-Drucker verwenden zu k枚nnen, m眉ssen Sie auf alle "
-"F盲lle dessen Rechnernamen, bzw. IP-Adresse - m枚glicherweise auch den Port - "
-"angeben. Bei HP JetDirect Servern ist dies normalerweise die Port-Adresse "
-"9100, bei anderen Servern kann es eine andere sein. Schauen Sie im "
-"Zweifelsfall in die Unterlagen des Herstellers."
+"Benutzerkennzeichen einrichten\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"W盲hlen Sie einen der automatisch erkanneten Drucker aus der Liste oder geben "
-"Sie den Hostnamen oder die IP-Adresse und optional die Portnummer (wenn Port "
-"nicht angegeben, wird 9100 verwendet) ein."
+"- PCI und USB Ger盲te: Eine Auflistung der IDs der Hersteller, Ger盲te, "
+"Subhersteller und Subger盲te von PCI / USB Ger盲ten."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Optionen f眉r TCP/Socket-Drucker"
+msgid "ProgressBar color selection"
+msgstr "Farbauswahl f眉r den Fortschrittsbalken"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Rechner 鈥%s鈥, Port %s"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Hier sind die verschiedenen Eintr盲ge.\n"
+"Sie k枚nnen weitere hinzuf眉gen oder existierende 盲ndern."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", Rechner 鈥%s鈥, Port %s"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "Netzwerk durchsuchen ..."
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Selbsterkennung von Druckern"
+msgid ""
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
+msgstr ""
+"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
+"daf眉r vorgesehene Zeitpunkt erreicht ist. L盲sst die Systemauslastung \n"
+"es zu, werden sog. Batch-Anwendungen gestartet."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Der NCP Warteschlangen-Name fehlt!"
+msgid "Radio support:"
+msgstr "Radiobetrieb:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Der NCP Servername fehlt!"
+msgid "Installing SANE packages..."
+msgstr "Installiere SANE Pakete..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
+msgid "boot disk creation"
+msgstr "Boot-Disketten Erstellung"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Drucker-Server"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
-"notwendig, den entsprechenden Benutzernamen samt Passwort."
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Optionen f眉r NetWare-Drucker"
+msgid "Change type"
+msgstr "Typ 盲ndern"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Verbinden Sie Ihren Drucker mit einem Linux-Server und lassen Sie Ihre(n) "
-"Windows-Rechner als Client auf ihn zugreifen.\n"
-" \n"
-"M枚chten Sie Ihren Drucker wirklich so einrichten, wie Sie es jetzt tun?"
+msgid "SILO Installation"
+msgstr "SILO Installation"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Richten Sie Ihren Windows-Server so ein, dass Ihr Drucker 眉ber das IPP-"
-"Protokoll erreichbar ist und konfigurieren sie ihn auf dieser Maschine mit "
-"dem Verbindungstyp 鈥%s鈥 in Printerdrake.\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
+msgstr "Sicherungskopie auf CD/DVDROM"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
"\n"
-msgstr ""
-"Sie sind dabei, einen Drucker einzurichten, der 眉ber ein Windows-"
-"Benutzerkonto mit Passwort druckt. Aufgrund eines Fehlers in der Architektur "
-"der Samba-Client-Software wird das Passwort im Klartext in die Kommandozeile "
-"der Samba-Komponente eingef眉gt, welche die zu druckenden Daten auf den "
-"Windows-Server 眉bertr盲gt. So ist es f眉r jeden Benutzer m枚glich, das Passwort "
-"auf dem Bildschirm anzuzeigen, indem er Kommandos wie zum Beispiel 鈥瀙s "
-"auxwww鈥 ausf眉hrt.\n"
+"%s\n"
"\n"
-"Wir empfehlen von einer der folgenden Alternativen Gebrauch zu machen (in "
-"allen F盲llen muss sichergestellt werden dass nur Maschinen des lokalen "
-"Netzwerks auf den Windows-Server zugreifen k枚nnen, zum Beispiel mit Hilfe "
-"einer Firewall):\n"
"\n"
-"Drucken Sie 眉ber ein Benutzerkonto ohne Passwort auf Ihrem Windows-Server, "
-"zum Beispiel 眉ber das 鈥濭UEST鈥-Benutzerkonto oder 眉ber ein speziell zum "
-"Drucken eingerichtetes Benutzerkonto. Entfernen Sie nicht den Passwortschutz "
-"von einem pers枚nlichen Benutzerkonto oder vom Administratorkonto.\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"Herzlichen Gl眉ckwunsch, die Installation ist abgeschlossen.\n"
+"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und dr眉cken Sie die "
+"Eingabetaste zum Neustart Ihres Rechners.\n"
"\n"
-"Richten Sie Ihren Windows-Server so ein, dass der Drucker unter dem LPD-"
-"Protokoll erreichbar ist. Dann richten sie den Drucker auf dieser Maschine "
-"mit dem Verbindungstyp 鈥%s鈥 ein.\n"
+"F眉r Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
+"Linux informieren Sie sich bitte unter \n"
"\n"
+"%s\n"
+"\n"
+"Wie Sie Ihr System warten k枚nnen, erfahren Sie im Kapitel 鈥濶ach der "
+"Installation鈥 im offiziellen Benutzerhandbuch von Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SICHERHEITSWARNUNG!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Der Name der Samba-Freigabe fehlt!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie m眉ssen entweder Den Servernamen oder seine IP-Adresse angeben!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Auto-detected"
-msgstr "Selbst gefunden"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Share name"
-msgstr "Freigabename"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
+msgid "paranoid"
+msgstr "Paranoid"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-Server"
+msgid "Send mail report after each backup to:"
+msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Falls der gew眉nschte Drucker bereits gefunden wurde, w盲hlen Sie ihn einfach "
-"aus der Liste unten aus und geben Sie - falls notwendig - Name, Passwort und/"
-"oder Dom盲ne an."
+"Sie k枚nnen diesen Befehl auch im 鈥濪ruckkommando鈥-Feld vieler Programme "
+"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
+"erg盲nzt wird.\n"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Aufl枚sung"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12416,1094 +11312,1093 @@ msgstr ""
"f眉r den Drucker, auf den Sie zugreifen m枚chten, sowie entsprechender "
"Benutzername, Passwort und Arbeitsgruppe."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Drucker 鈥%s鈥, auf Server 鈥%s鈥"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", Drucker 鈥%s鈥, auf Server 鈥%s鈥"
+msgid "reconfigure"
+msgstr "neu konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Der Name des entfernten Druckers fehlt!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
+"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
+"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS F脺HREN."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Der Name des entfernten Rechners fehlt!"
+msgid "Xinetd Service"
+msgstr "xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
+msgid "access to network tools"
+msgstr "Zugriff auf Netzwerk-Werkzeuge"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Name des entfernten Rechners"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Um einen LPD-Drucker im Netzwerk zu verwenden, m眉ssen Sie den Rechnernamen "
-"des Drucker-Servers sowie den Druckernamen auf diesem Server angeben, an den "
-"die Auftr盲ge 眉bertragen werden sollen."
+"Mandrake Linux 9.1 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
+"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
+"bearbeiten sowie Videos abzuspielen ..."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Optionen f眉r Netzwerk-Druckerspooler"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Manuelle Konfiguration"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Fehler bei der Installation von aboot. Soll ich die Installation \n"
+"mit Gewalt versuchen, auch wenn dies die Zerst枚rung der ersten \n"
+"Partition verursachen kann?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Sie m眉ssen einen Drucker w盲hlen/ein Ger盲t eingeben!"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
+msgstr ""
+"Parameter:\n"
+"\n"
+" In diesem Schritt erlaubt Ihnen DrakBackup folgende 脛nderungen:\n"
+"\n"
+" - Kompressionsmodus:\n"
+" \n"
+" Mit der 鈥瀊zip2鈥 Kompression, werden Ihre Daten\n"
+" besser als mit 鈥瀏zip鈥 komprimiert (ca. 2-10 %%).\n"
+" Standardm盲脽ig ist dier Modus deaktiviert, da er\n"
+" mehr Zeit ben枚tigt (bis zu 1.000%%).\n"
+" \n"
+" - Aktualisierungsmodus:\n"
+"\n"
+" Mit dieser Option k枚nnen Sie Ihre Sicherungskopie\n"
+" aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
+" da Sie Ihre Kopie auspacken m眉ssen, um sie \n"
+" aktualisieren zu k枚nnen.\n"
+" \n"
+" - Der 鈥.backupignore鈥-Modus:\n"
+"\n"
+" Wie bei dem Programm 鈥瀋vs鈥, wird DrakBackup alle\n"
+" Dateien/Ordner, die in der Datei 鈥.backupignore鈥淺n"
+" des aktuellen Verzeichnisses aufgef眉hrt sind,\n"
+" von der Sicherung ausschlie脽en.\n"
+" Beispiel:\n"
+" > cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" \n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Restore Selected\n"
+"Files"
msgstr ""
-" (Parallele Anschl眉sse: /dev/lp0, /dev/lp1, ..., 盲quivalent zu LPT1:, "
-"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweiter USB Drucker: /dev/usb/"
-"lp1, ...)."
+"Markierte Dateien\n"
+"wiederherstellen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Bitte w盲hlen Sie den Anschluss, an dem Ihr Drucker h盲ngt."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+msgid "Please fill or check the field below"
msgstr ""
-"Bitte w盲hlen Sie den Anschluss, an dem der Drucker h盲ngt oder geben Sie "
-"einen Ger盲te- oder Dateinamen in der Eingabezeile an."
+"Bitte f眉llen Sie die folgen Felder aus \n"
+"bzw. makieren Sie die korrekten Angaben"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Bitte w盲hlen Sie den Drucker, an den die Druckauftr盲ge gehen sollen."
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "M枚chten Sie die vorgenommenen 脛nderungen in 鈥/etc/fstab鈥 speichern?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Bitte w盲hlen Sie den Drucker, den Sie einrichten wollen. Die Einrichtung "
-"wird voll-automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt "
-"worden sein oder wollen Sie die Einrichtung selbst vornehmen, w盲hlen Sie "
-"鈥濵anuelle Konfiguration鈥."
+msgid "Boot Protocol"
+msgstr "Boot-Protokoll"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "LVM-disks %s\n"
+msgstr "LVM Platten %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "Das Paket %s wird ben枚tigt. Soll ich es installieren?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Die Einrichtung des Druckers wird vollautomatisch erfolgen. Sollte Ihr "
-"Drucker nicht richtig erkannt worden sein oder wollen Sie die Einrichtung "
-"selbst vornehmen, w盲hlen Sie 鈥濵anuelle Konfiguration鈥."
+msgid "On boot"
+msgstr "Bei BS-Start"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Der folgenden Drucker wurde automatisch erkannt."
+msgid "Bus identification"
+msgstr "Bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Bitte w盲hlen Sie den Drucker, an den die Druckauftr盲ge gehen sollen oder "
-"geben Sie einen Ger盲te- oder Dateinamen in der Eingabezeile an."
+msgid "Please make a backup of your data first"
+msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Bitte w盲hlen Sie den Drucker den sie einrichten wollen oder geben Sie einen "
-"Ger盲te- oder Dateinamen in der Eingabezeile an."
+msgid "Vatican"
+msgstr "Vatikan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
-"Alternativ k枚nnen Sie einen Ger盲te- oder Dateinamen in der Eingabezeile "
-"angeben"
+"Sie haben mehr als eine Festplatte.\n"
+"Auf welche soll GNU/Linux installiert werden?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+msgid "Boot ISO"
+msgstr "Boot ISO"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Eritrea"
+msgstr "Eritrea"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Remove List"
+msgstr "Liste entfernen"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid "A customizable environment"
msgstr ""
-"Falls das nicht der Drucker ist, den Sie einrichten wollen, geben Sie einen "
-"Ger盲te- oder Dateinamen in der Eingabezeile an."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Vorhandene Drucker"
+msgid "Inuktitut"
+msgstr "Gr枚nland (Inuktitut)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Kein Drucker erkannt!"
+msgid "Morocco"
+msgstr "Marokko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Sie m眉ssen einen Ger盲te- oder Dateinamen eingeben!"
+msgid "Which printer model do you have?"
+msgstr "脺ber welchen Druckertyp verf眉gen Sie?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzuf眉gen geben Sie "
-"einfach einen Ger盲te- oder Dateinamen in der Eingabezeile an (Parallele "
-"Anschl眉sse: /dev/lp0, /dev/lp1, ..., 盲quivalent zu LPT1:, LPT2:, ...; Erster "
-"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
+msgid "Add a new printer"
+msgstr "Drucker hinzuf眉gen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printer"
-msgstr "Lokaler Drucker"
+msgid " All of your selected data have been "
+msgstr " Alle Ihre gew盲hlten Daten wurden "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-Drucker \\#%s"
+msgid "<-- Delete"
+msgstr "<-- L枚schen"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Drucker an Parallelport \\#%s"
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Drucker 鈥%s鈥 am SMB/Windows Server 鈥%s鈥"
+msgid "cpu # "
+msgstr "CPU #"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netzwerkdrucker 鈥%s鈥, Port %s"
+msgid "chunk size"
+msgstr "Blockgr枚脽e"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Detected %s"
-msgstr "%s gefunden"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", Drucker 鈥%s鈥 an SMB/Windows Server 鈥%s鈥"
+msgid "Problems installing package %s"
+msgstr "Probleme beim Installieren von Paket %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", Netzwerkdrucker 鈥%s鈥, Port %s"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Sie erhalten eine Nachricht, wen die Load 眉ber diesen Wert steigt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
"\n"
-"Congratulations, your printer is now installed and configured!\n"
"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
msgstr ""
-"\n"
-"Herzlichen Gl眉ckwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
-"\n"
-"Sie k枚nnen nun mit dem 鈥濪rucken鈥 Befehl Ihrer Anwendungen (meistens im "
-"鈥濪atei鈥-Men眉 zu finden) drucken.\n"
-"\n"
-"Falls Sie einen Drucker hinzuf眉gen, entfernen oder umbenennen wollen,\n"
-"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
-"Druckqualit盲t) anpassen wollen, w盲hlen Sie 鈥濪rucker鈥 im 鈥濰ardware鈥淺n"
-"Bereich des Mandrake Kontrollzentrums."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Selbsterkennung von Druckern, die an Windows Rechnern h盲ngen"
+msgid "Add a scanner manually"
+msgstr "Scanner manuell hinzuf眉gen"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Selbsterkennung von Druckern, die im lokalen Netzwerk h盲ngen"
+msgid "Reload partition table"
+msgstr "Partitionstabelle neu laden"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Selbsterkennung von direkt am Rechner angeschlossenen Druckern"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser Oberfl盲che"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent m枚chte Ihnen helfen, Ihre(n) lokalen Drucker zu "
-"konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind.\n"
-"\n"
-"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter鈥, wenn Sie soweit sind, bzw. "
-"鈥濧bbruch鈥, wenn Sie keine Drucker konfigurieren wollen."
+msgid "Search for fonts in installed list"
+msgstr "Suche installierter Schriften"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent m枚chte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker zu "
-"konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
-"m眉ssen die Netzwerkdrucker eingeschaltet und mit dem Netz verbunden sein.\n"
-"\n"
-"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas l盲nger "
-"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner h盲ngen. Sie "
-"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
-"h盲ngende Drucker verwenden wollen.\n"
-"\n"
-"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter鈥, wenn Sie soweit sind, bzw. "
-"鈥濧bbruch鈥, wenn Sie keine Drucker konfigurieren wollen."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Das lokale Netzwerk endet nicht auf 鈥.0鈥 - bereinige."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Boot"
+msgstr "BS-Start"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
+msgid "Tuner type:"
+msgstr "Tunertyp:"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
+"Hier k枚nnen Sie das Drucksystem f眉r Ihren Rechner w盲hlen. Andere\n"
+"Betriebssysteme bieten Ihnen nur eines, bei Mandrake Linux k枚nnen Sie\n"
+"zwischen zwei verschiedenen w盲hlen.\n"
"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent m枚chte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker "
-"sowie Drucker an Windowsrechnern im lokalen Netz zu konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
-"m眉ssen die Netzwerkdrucker bzw. Windows-Rechner eingeschaltet sein.\n"
+" * 鈥%s鈥 - Es steht f眉r 鈥瀙rint, don't queue鈥 (engl. f眉r 鈥濪rucken ohne\n"
+"Warteschlange鈥). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
+"h盲ngt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
+"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
+"dabei aber extrem langsam. W盲hlen Sie 鈥瀙dq鈥, wenn Sie ein GNU/Linux Neuling\n"
+"sind.\n"
"\n"
-"Es sei angemerkt, dass sie Erkennung von Netzwerkdruckern etwas l盲nger "
-"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner h盲ngen. Sie "
-"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
-"h盲ngende Drucker verwenden wollen.\n"
+" * 鈥%s鈥 - Mit dem 鈥濩ommon Unix Printing System鈥 (engl. f眉r 鈥濧llgemeines\n"
+"Unix-Drucksystem鈥) k枚nnen Sie ebenso gut um auf Ihrem direkt\n"
+"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
+"auf der anderen Seite der Welt h盲ngt. Es ist einfach zu bedienen und kann\n"
+"sowohl als Server als auch als Klient f眉r das alte 鈥瀕pd鈥-Drucksystem\n"
+"verwendet werden - Es ist somit r眉ckw盲rtskompatibel. Es ist sehr m盲chtig,\n"
+"in seiner Grundeinstellung verh盲lt es sich jedoch genau wie 鈥瀙dq鈥. Wenn Sie\n"
+"einen 鈥瀕pd鈥 Server ben枚tigen, m眉ssen Sie einfach nur den 鈥瀋ups-lpd鈥 D盲mon\n"
+"starten. CUPS bietet grafische Konfigurations- und Druckmen眉s.\n"
"\n"
-"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter鈥, wenn Sie soweit sind, bzw. "
-"鈥濧bbruch鈥, wenn Sie keine Drucker konfigurieren wollen."
+"Sie k枚nnen diese Wahl sp盲ter immer wieder 盲ndern, indem Sie PrinterDrake im\n"
+"Mandrake-Kontrollzentrum starten und dort die Schaltfl盲che 鈥%s鈥 bet盲tigen."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr "Men眉taste"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
"\n"
-"Dieser Assistent hilft Ihnen lokale oder Netzwerkdrucker so einzurichten, "
-"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken k枚nnen.\n"
-"\n"
-"Sie werden nur nach den n枚tigen Informationen 眉ber den Drucker gefragt, um "
-"Ihnen dann Zugriff auf Treiber, Druckoptionen und Anschlussart zu erhalten."
+"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
+"Falls die Markierung auf einem falschen Ger盲t oder auf 鈥濺ohdaten-Drucker鈥 "
+"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+msgid "Security Administrator:"
+msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail):"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Please enter your login"
+msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid " on "
-msgstr " auf "
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "("
-msgstr "("
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
+msgstr ""
+"Sie haben noch keine Internetverbindung eingerichtet.\n"
+"Sie k枚nnen dies tun, indem Sie die Schaltfl盲che \n"
+"鈥濳onfigurieren鈥 bet盲tigen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Drucker konfigurieren ..."
+msgid "Fonts copy"
+msgstr "Kopiere Schriften"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Suche nach neuen Druckern..."
+msgid "Automated"
+msgstr "Automatisiert"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "M枚chten Sie die vorgenommenen Einstellungen pr眉fen?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"ANMERKUNG: Je nach Drucker und Drucksystem werden bis zu %d MB zus盲tzlicher "
-"Software auf Ihrem Rechner installiert."
+"Der Drucker 鈥%s鈥 wurde erfogrich f眉r StarOffice/OpenOffice.org/GIMP entfernt."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Sind Sie sicher, dass Sie mit diesem Rechner drucken wollen?\n"
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wollen Sie oben aufgef眉hrte Drucker zum Drucken konfigurieren?\n"
+msgid "Save packages selection"
+msgstr "Paketauswahl speichern"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Wollen Sie Drucker im lokalen Netzwerk zum Drucken konfigurieren?\n"
+msgid "Remove the last item"
+msgstr "Letzten Eintrag entfernen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-"Wollen Sie oben aufgef眉hrte Drucker oder Drucker im lokalen Netzwerk zum "
-"Drucken konfigurieren?\n"
+"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
+"wichtig)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+msgid "No net boot images created!"
msgstr ""
-"(Stellen Sie bitte sicher, dass alle Drucker angeschlossen und angeschaltet "
-"sind).\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Ich konnte keine Drucker direkt an Ihrem Rechner finden."
+msgid "use pptp"
+msgstr "PPTP verwenden"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+msgid "Choose which services should be automatically started at boot time"
msgstr ""
-"\n"
-"Ich konnte %d unbekannte Drucker direkt an Ihrem Rechner finden."
+"W盲hlen Sie, welche Dienste\n"
+"automatisch beim Systemstart\n"
+"aktiviert werden sollen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Ich konnte einen unbekannten Drucker direkt an Ihrem Rechner finden."
+msgid "Learn how to use this printer"
+msgstr "Wie dieser Drucker genutzt werden kann"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Der folgende Drucker\n"
-"\n"
-"%s%s\n"
-"ist direkt an Ihr System angeschlossen"
+msgid "Configure the network now"
+msgstr "Netzwerk jetzt konfigurieren"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Die folgenden Drucker\n"
-"\n"
-"%s%s\n"
-"sind direkt an Ihr System angeschlossen"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Bitte w盲hlen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Die folgenden Drucker\n"
-"\n"
-"%s%s\n"
-"sind direkt an Ihr System angeschlossen."
+"Das Werkzeug zum Ver盲ndern der FAT Partitionsgr枚脽e kann mit der \n"
+"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "und %d unbekannte Drucker"
+msgid "Which sector do you want to move it to?"
+msgstr "Zu welchem Sektor wollen Sie wechseln?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "and one unknown printer"
-msgstr "und ein unbekannter Drucker"
+msgid "Do you want to click on this button?"
+msgstr "M枚chten Sie diese Schaltfl盲che bet盲tigen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Checking your system..."
-msgstr "Untersuchung Ihres Rechners ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Neustart des X-FontServers"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugef眉gt "
-"werden.\n"
+msgid "Manual configuration"
+msgstr "Manuelle Konfiguration"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Beispiele f眉r korrekte IPs:\n"
+msgid "search"
+msgstr "Suche starten"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Die eingegebene IP ist nicht korrekt.\n"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Dieser Dienst l盲dt die Tastaturbelegung, die in der Datei \n"
+"鈥/etc/sysconfig/keyboard鈥 angegeben ist. Mittels 鈥瀔bdconfig鈥 \n"
+"k枚nnen Sie diese Einstellung 盲ndern. Schalten Sie diesen Dienst ab, \n"
+"m眉ssen Sie ab dem n盲chsten Systemstart mit der amerikanischen \n"
+"Tastatur vorlieb nehmen."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Die Server-IP fehlt!"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (Installationsbildschirmtreiber)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
+"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
+"aktiviert zu haben."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown/Others"
+msgstr "Unbekannt/Andere"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Remove selected server"
-msgstr "L枚schen des markierten Servers"
+msgid "No TV Card detected!"
+msgstr "Keine TV-Karte gefunden!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "脛nderung des markierten Servers"
+msgid "Options"
+msgstr "Optionen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add server"
-msgstr "Server hinzuf眉gen"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Der Drucker 鈥%s鈥 ist jetzt Ihr Standarddrucker鈥"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
+"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
+"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
+"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
+"Schnittstelle oder an einer Printserver-Box h盲ngen, schlie脽en Sie ihn bitte "
+"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-Adresse des Rechners/Netzwerks:"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "CPU-Familie (6 steht etwa f眉r i686)."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"IP-Adresse bzw. Netzwerk sind bereits in der Liste, \n"
-"Sie k枚nnen sie nicht erneut hinzuf眉gen.\n"
+msgid "Auto-detected"
+msgstr "Selbst gefunden"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Die eingegebene Rechner/Netzwerk Information ist nicht korrekt.\n"
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Sie sind dabei, auf Ihrem Rechner einen PXE-Server als DHCP-Server sowie "
+"einen TFTP-Server einzurichten. Damit erm枚glichen Sie es anderen Rechnern "
+"Ihres Netzwerks eine Installation von diesem Rechner aus vorzunehmen.\n"
+"\n"
+"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung mit "
+"DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
+"Anmerkung: Sie ben枚tigen eine Netzwerkkarte, mit deren Hilfe Sie ein lokales "
+"Netz (LAN) aufsetzen k枚nnen."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
+"Sie haben keinen Platz f眉r die 1 MB gro脽e Start-Partition vorgesehen! Die "
+"Installation wird fortgesetzt, Sie m眉ssen jedoch eine Start-Partition mit "
+"DiskDrake erstellen."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-"W盲hlen Sie Netzwerke bzw. Rechner, denen lokale Drucker bekannt gemacht "
-"werden sollen:"
+"Bitte w盲hlen Sie den Drucker den sie einrichten wollen oder geben Sie einen "
+"Ger盲te- oder Dateinamen in der Eingabezeile an."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Gemeinsamer Zugriff auf lokale Drucker"
+msgid "Refuse"
+msgstr "Zur眉ckweisen"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "L枚schen der markierte Rechner/Netzwerke"
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "脛nderung der markierten Rechner/Netzwerke"
+msgid ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
+msgstr ""
+"HardDrake f眉hrt Hardwaretests durch, und konfiguriert (falls n枚tig) \n"
+"neue/ge盲nderte Hardware."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Hinzuf眉gen eines Rechners/Netzwerks"
+msgid "Remote Printers"
+msgstr "Netzwerkdrucker"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
+msgid "Creating and formatting file %s"
+msgstr "Erzeugen und formatieren der Datei %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
-"Das sind die Rechner und Netzwerke, f眉r die die lokalen Drucker zug盲nglich "
-"sein sollen:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatische Korrektur der CUPS Konfiguration"
+msgid "Choose an existing LVM to add to"
+msgstr "W盲hlen Sie einen vorhandenen LVM"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "xfs restart"
+msgstr "xfs Neustart"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
+"Der Drucker 鈥%s鈥 existiert bereits. Wollen Sie ihn wirklich \n"
+"ersetzen?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Drucksystem 盲ndern"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "Keine Partition verf眉gbar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Use the scanners on hosts: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "None"
-msgstr "Keine"
+msgid "Unselected All"
+msgstr "Markierung l枚schen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Weitere CUPS-Server: "
+msgid "Domain Name Resolver"
+msgstr "DNS"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No remote machines"
-msgstr "Keine entfernten Maschinen"
+msgid "Encryption key (again)"
+msgstr "Schl眉ssel (erneut)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Custom configuration"
-msgstr "Angepasste Konfiguration"
+msgid "Samba share name missing!"
+msgstr "Der Name der Samba-Freigabe fehlt!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Gemeinsamer Druckerzugriff auf Rechnern/Netzwerken:"
+msgid "True Type install done"
+msgstr "TrueType Installation beendet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automatische Suche nutzbarer Drucker auf anderen Rechnern"
+msgid "Detection in progress"
+msgstr "Erkennung l盲uft"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Die Drucker dieses Rechners sind f眉r andere Rechner nutzbar"
+msgid "Build Whole Kernel -->"
+msgstr "Ganzen Kern erstellen -->"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Sie k枚nnen hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
-"diesem Rechner zur Verf眉gung gestellt werden sollen."
+msgid "Welcome to %s"
+msgstr "Willkommen auf %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "Please insert the Update Modules floppy in drive %s"
msgstr ""
-"Hier k枚nnen Sie einstellen, ob die Drucker, die an diesem Rechner h盲ngen, "
-"f眉r andere Rechner nutzbar sein sollen und falls ja, f眉r welche."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Konfiguration des gemeinsamen Zugriffes auf CUPS-Drucker"
+"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
+"ein."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Autoerkennung von Druckern (Lokal, TCP/Socket und SMB Drucker)"
+msgid "Bootsplash"
+msgstr "Startschirm"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Der folgende Drucker\n"
"\n"
-"Drucker an entfernten CUPS-Servern m眉ssen hier nicht konfiguriert werden; "
-"diese Drucker werden automatisch erkannt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
+"%s%s\n"
+"ist direkt an Ihr System angeschlossen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "W盲hlen Sie die Drucker-Anbindung"
+msgid "Printer sharing on hosts/networks: "
+msgstr "Gemeinsamer Druckerzugriff auf Rechnern/Netzwerken:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+"\n"
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
+"\n"
+"Der Befehl 鈥%s鈥 erlaubt es Ihnen auch zahlreiche Einstellungen f眉r einen "
+"bestimmten Druckauftrag zu 盲ndern. Geben Sie die gew眉nschten Angaben einfach "
+"in der Kommandozeile mit an, etwa: 鈥%s <Datei>鈥. "
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"Argumente: (umask)\n"
-"\n"
-"Setzen der Benutzerzugriffsmaske."
+"In einigen F盲llen ben枚tigt der 鈥%s鈥 Treiber zus盲tzliche Informationen,\n"
+"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
+"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
+"眉berlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
+"Treiber kann in seltenen F盲llen zum 鈥濰盲ngenbleiben鈥 des Rechners f眉hren, was "
+"jedoch keine Hardwaresch盲den nach sich ziehen sollte)"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-"Argumente: (val)\n"
-"\n"
-"Setzen des Shell-Timeouts. 鈥0鈥 steht hier f眉r ohne Timeout."
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Arguments: (size)\n"
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Argumente: (size)\n"
+"Willkommen zu DrakGW -\n"
+"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
"\n"
-"Setzen der Gr枚脽e des Kommandozeilenarchivs. Der Wert 鈥-1鈥 steht f眉r "
-"unbegrenzt."
+"%s\n"
+"\n"
+"W盲hlen Sie 鈥濳onfigurieren鈥 wenn Sie den Assistenten starten wollen."
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Cuba"
+msgstr "Kuba"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "Auf 鈥濲a鈥 gestellt, werden offene Ports kontrolliert."
+msgid "Searching for new printers..."
+msgstr "Suche nach neuen Druckern..."
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"Wenn ausgef眉llt, wird E-Mail an diese Adresse geschickt, sonst an 鈥瀝oot鈥."
+msgid "Belize"
+msgstr "Belize"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "if set to yes, report check result by mail."
+msgid " (multi-session)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Kernel Boot Timeout"
+msgstr "BS-Startverz枚gerung f眉r den Kern"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
+"XFree %s. Ihre Karte wird auch von XFree %s unterst眉tzt, wodurch Sie \n"
+"bessere 2D-Unterst眉tzung erhalten k枚nnen."
-#: ../../security/help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Der DrakX Partitionierungsassistent fand folgende L枚sung:"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Hungarian"
+msgstr "Ungarn"
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"W盲hlen Sie Ihren Netzanbieter.\n"
+"Sollte er nicht aufgef眉hrt sein, w盲hlen Sie 鈥濶icht aufgef眉hrt鈥"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LDAP Server"
+msgstr "LDAP Server"
-#: ../../security/help.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
+"oder Modems verwenden zu k枚nnen. Dieser Dienst wird nur gestartet, \n"
+"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
+"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Choose your country"
+msgstr "Land ausw盲hlen"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
+"\n"
+"- Systemdateien:\n"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "Standalone Tools"
+msgstr "Eingenst盲ndige Werkzeuge"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Where"
+msgstr "Wo"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "but not matching"
+msgstr "keine 脺bereinstimmung mit"
-#: ../../security/help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"Hier k枚nnen Sie einen alternativen Treiber (entweder OSS odr ALSA) f眉r Ihre "
+"Soundkarte (%s) ausw盲hlen"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA Karten konfigurieren ..."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
-msgstr ""
+msgid "kdesu missing"
+msgstr "Ich kann 鈥瀔desu鈥 nicht finden!"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Encryption key"
+msgstr "Schl眉ssel"
-#: ../../security/help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMaus"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Christmas Island"
+msgstr "Osterinsel"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
+"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI Kanal"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Als Standarddrucker verwenden"
-#: ../../security/help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "partition %s"
+msgstr "Partition %s"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoid"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "<-- Del User"
+msgstr "<-- Benutzer l枚schen"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Location on the bus"
+msgstr "Standort auf den Bus"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "No printer found!"
+msgstr "Kein Drucker erkannt!"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "Herstellername des Ger盲ts"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Erase entire disk"
+msgstr "Komplette Platte l枚schen"
+
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Default)"
+msgstr " (Standard)"
#: ../../security/help.pm:1
#, c-format
@@ -13520,813 +12415,774 @@ msgid ""
"during the installation of packages."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Automatic reconfiguration"
+msgstr "Automatische Rekonfiguration"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Receiving Speed:"
+msgstr "Enpfangsgeschwindigkeit: "
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "Turks and Caicos Islands"
+msgstr "Turks und Caicos Inseln"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "permissions"
+msgstr "Berechtigungen"
-#: ../../security/help.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "<- Previous"
+msgstr "<- Zur眉ck"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Internet Connection Sharing configuration"
+msgstr "Teilen der Internetverbindung - Konfiguration"
-#: ../../security/help.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Umschalten zwischen unsortiert und gruppiert"
-#: ../../security/help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Themes"
+msgstr "Themen"
-#: ../../security/help.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Options: %s"
+msgstr "Optionen: %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Sie verwenden momentan 鈥%s鈥 als Betriebssystemstarter.\n"
+"W盲hlen Sie 鈥濳onfigurieren鈥, wenn Sie den Assistenten starten wollen."
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
+msgid "OKI winprinter configuration"
+msgstr "OKI Win-Drucker Konfiguration"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
+msgid "Saint Helena"
+msgstr "Sankt Helena"
-#: ../../security/level.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail)"
+msgid "Security Level"
+msgstr "Sicherheitsebene"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Eine Bibliothek, die gegen sog. 鈥瀊uffer overflow鈥-Angriffe sch眉tzt."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "鈥瀕ibsafe鈥 bei Servern verwenden"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Sicherheitsebene"
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
+msgstr ""
+"Einige Schritte sind noch nicht komplett.\n"
+"\n"
+"Wollen Sie DrakX wirklich beenden?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "W盲hlen Sie Ihre Sicherheitsebene"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../security/level.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec Grundeinstellungen"
+msgid "Polish (qwertz layout)"
+msgstr "Polen (QWERTZ Layout)"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe Funktionalit盲t, wie die vorherige. Jedoch ist \n"
-"das System nun komplett geschlossen. Es ist die h枚chste Sicherheitsebene."
+msgid "Syria"
+msgstr "Syrien"
-#: ../../security/level.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
+"\n"
msgstr ""
-"Mit dieser Sicherheitsebene wird es m枚glich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
-"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
-"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
-"verwenden sollte."
+"Willkommen zum Betriebssystem-Starter %s\n"
+"\n"
+"Markieren Sie in obiger Liste ein Betriebssystem\n"
+"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
+"\n"
-#: ../../security/level.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
-"Sicherheitstests durchgef眉hrt."
+msgid "Portuguese"
+msgstr "Portugal"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Das ist die Standard-Sicherheitsebene f眉r Rechner, mit Internetzugang \n"
-"als Klient."
+msgid "Loopback file name: "
+msgstr "Name der Loopback-Datei: "
-#: ../../security/level.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "DNS server address should be in format 1.2.3.4"
msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
+"Die IP Adresse des DNS-Servers sollte etwa die Form 鈥192.168.1.42鈥 haben!"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen k枚nnen!"
+msgid "Serbia"
+msgstr "Serbien"
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
+msgid "Newzealand"
+msgstr "Neuseeland"
-#: ../../security/level.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Higher"
-msgstr "H枚her"
+msgid "This directory should remain within the root filesystem"
+msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
-#: ../../security/level.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "High"
-msgstr "Hoch"
+msgid "CapsLock key"
+msgstr "CapsLock Taste"
-#: ../../security/level.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Poor"
-msgstr "Schwach"
+msgid "Install bootloader"
+msgstr "BS-Starter installieren"
-#: ../../security/level.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
+msgid "Select the memory size of your graphics card"
+msgstr "W盲hlen Sie die Speichergr枚脽e Ihrer Grafikkarte"
-#: ../../standalone/XFdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"Bitte loggen Sie sich erneut in %s ein, \n"
-"um die 脛nderungen wirksam werden zu lassen."
-
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte loggen Sie sich aus, und dr眉cken Sie Ctrl-Alt-R眉cktaste"
+"[OPTIONS]\n"
+"Anwendung zur Verbindung und 脺berwachung von Netzwerk und Internet\n"
+"\n"
+"--defaultintf interface : zeige diese Schnittstelle als Voreinstellung\n"
+"--connect : verbinde mit dem Internet wenn nicht schon verbunden\n"
+"--disconnect : trenne vom Internet wenn verbunden\n"
+"--force : bei (dis)connect : erzwinge Verbinden/Trennen.\n"
+"--status : gibt 1 zur眉ck wenn verbunden sonst 0, beendet sich danach.\n"
+"--quiet : nicht interaktiv. benutzt mit (dis)connect."
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "鈥/etc/dhcpd.conf鈥 muss erst angelegt werden!"
+msgid "LVM name?"
+msgstr "LVM Name?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Es trat ein Fehler auf! Ist 鈥瀖kisofs鈥 installiert?"
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Einige Ger盲te in der Klasse %s wurden entfernt:\n"
-#: ../../standalone/drakTermServ:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Schnittstelle(n) %s %s gefunden"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Kein Disketten-Laufwerk verf眉gbar!"
+msgid "sticky-bit"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Sie k枚nnen die Diskette nun entfernen"
+msgid "Post Install"
+msgstr "Nach der Installation"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Kein Diskettenzugriff m枚glich!"
+msgid "The internal domain name"
+msgstr "Der interne Dom盲nen-Name"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Bitte legen Sie eine Diskette ein:"
+msgid "Card IRQ"
+msgstr "Karten IRQ"
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Konfiguration speichern"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
+msgstr ""
+"Argumente: (umask)\n"
+"\n"
+"Setzen der Benutzerzugriffsmaske."
-#: ../../standalone/drakTermServ:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "logdrake"
+msgstr "LogDrake"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd Server Konfiguration"
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
+"W盲hlen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-#: ../../standalone/drakTermServ:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO mit Textmen眉"
-#: ../../standalone/drakTermServ:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "DNS-Server:"
+msgid "Everything (no firewall)"
+msgstr "Alles (Keine Firewall)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Name der Dom盲ne:"
+msgid "You must specify a kernel image"
+msgstr "Sie M眉ssen ein Kern-Abbild angeben"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", USB Multifunktionsger盲t"
-#: ../../standalone/drakTermServ:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Do"
+msgstr "Los"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Routers:"
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
+"Verbindung mit dem Mirror aufbauen, um eine Liste verf眉gbarer Pakete zu "
+"erhalten."
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Netmask:"
-msgstr "Netzmaske:"
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litauen (AZERTY - alt)"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasilien (ABNT-2)"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
+msgstr "IP-Adresse des Rechners/Netzwerks:"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "DHCP Konfigurieren ..."
+msgid "System installation"
+msgstr "Installation"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Client l枚schen"
+msgid "Saint Vincent and the Grenadines"
+msgstr "St. Vincent und die Grenadinen"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Client bearbeiten"
+msgid "/File/_Open"
+msgstr "/Datei/_脰ffnen"
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Klient hinzuf眉gen -->"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Erlaube Thin Clients"
+msgid "Location of auto_install.cfg file"
+msgstr "Ort der auto_install.cfg Datei"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Thin Client"
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Verz枚gerung"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr ""
+msgid "Hungary"
+msgstr "Ungarn"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "type: %s"
-msgstr "Typ: %s"
+msgid "Total progess"
+msgstr "Fortschritt"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Benutzer l枚schen"
+msgid "Color configuration"
+msgstr "Farbkonfiguration"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Benutzer hinzuf眉gen -->"
+msgid "New Zealand"
+msgstr "Neuseeland"
-#: ../../standalone/drakTermServ:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
+"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
+"Sicherheitstests durchgef眉hrt."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Alle NBIs l枚schen"
+msgid "please choose the date to restore"
+msgstr "Bitte w盲hlen Sie, welches Datum wiederhergestellt werden soll."
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- L枚schen"
+msgid "Switching from ext2 to ext3"
+msgstr "Konvertiere ext2 zu ext3"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Das dauert einige Minuten"
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Alle Kerne erstellen -->"
+msgid "Netherlands Antilles"
+msgstr "Niederl盲ndische Antillen"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Keine Netzwerkkarte ausgew盲hlt!"
+msgid "Browse to new restore repository."
+msgstr "Zum neuen Wiederherstellungsverzeichnis wechseln"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Single NIC -->"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
+"\n"
+"Willkommen zum Druckereinrichtungsassistenten\n"
+"\n"
+"Dieser Assistent hilft Ihnen lokale oder Netzwerkdrucker so einzurichten, "
+"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken k枚nnen.\n"
+"\n"
+"Sie werden nur nach den n枚tigen Informationen 眉ber den Drucker gefragt, um "
+"Ihnen dann Zugriff auf Treiber, Druckoptionen und Anschlussart zu erhalten."
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Kein Kern ausgew盲hlt!"
+msgid "and %d unknown printers"
+msgstr "und %d unbekannte Drucker"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Ganzen Kern erstellen -->"
+msgid ""
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Boot ISO"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr ""
+"Ich konnte keine PCI ISDN-Karte finden.\n"
+"Bitte w盲hlen Sie im n盲chsten Men眉 eine aus."
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Bootdiskette"
+msgid "GB"
+msgstr "GB"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
+#, c-format
+msgid "Please give a user name"
+msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Enable CD Boot?"
+msgstr "BS-Start von CD erlauben"
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid " enter `void' for void entry"
+msgstr "Geben Sie 鈥瀡oid鈥 f眉en Leeren Eintrag an"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on Hard Drive"
+msgstr "auf Festplatte"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Winmodem connection"
+msgstr "Winmodem Verbindung"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
+"Congratulations, your printer is now installed and configured!\n"
"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+"Herzlichen Gl眉ckwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Sie k枚nnen nun mit dem 鈥濪rucken鈥 Befehl Ihrer Anwendungen (meistens im "
+"鈥濪atei鈥-Men眉 zu finden) drucken.\n"
"\n"
-msgstr ""
+"Falls Sie einen Drucker hinzuf眉gen, entfernen oder umbenennen wollen,\n"
+"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
+"Druckqualit盲t) anpassen wollen, w盲hlen Sie 鈥濪rucker鈥 im 鈥濰ardware鈥淺n"
+"Bereich des Mandrake Kontrollzentrums."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Sie k枚nnen nun (unter X-Windows) 鈥瀤awtv鈥 starten.\n"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Der Swap-Bereich ist zu klein, um die Installation zu erm枚glichen! \n"
+"Bitte vergr枚脽ern Sie den Bereich."
+
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "%s (Port %s)"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
+"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und 眉bersetzt diese anhand\n"
+"der Zeitzone in Ihre lokale Zeit.\n"
+"\n"
+"Da Microsoft Windows(TM) nicht sinnvoll mit GMT umgehen kann, m眉ssen Sie\n"
+"鈥濶ein鈥 w盲hlen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
+"auf Ihrem Rechner 鈥瀊eherbergen鈥.\n"
+"\n"
+"Die Verwendung der Option 鈥%s鈥 reguliert Ihre Uhr, indem sie Verbindung mit\n"
+"einem Zeitserver im Internet aufnimmt. W盲hlen Sie aus der Liste einen\n"
+"Server in Ihrer N盲he. Damit die funktioniert ben枚tigen Sie eine st盲ndige\n"
+"Internetverbindung."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Clients hinzuf眉gen/l枚schen"
+msgid "Which is your timezone?"
+msgstr "W盲hlen Sie Ihre Zeitzone"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Benutzer hinzuf眉gen/l枚schen"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "The system is now connected to the Internet."
+msgstr "Das System ist jetzt mit dem Internet verbunden."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "South Georgia und die South Sandwich Islands"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Stop Server"
-msgstr "Server stoppen"
+msgid "Japan (broadcast)"
+msgstr "Japan (terrestrisch)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Server starten"
+msgid "Mozambique"
+msgstr "Mosambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Server deaktivieren"
+msgid "Icon"
+msgstr "Symbol"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable Server"
-msgstr "Server aktivieren"
+msgid "Please choose what you want to backup"
+msgstr "Bitte w盲hlen Sie, was Sie sichern wollen"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Mandrake Terminal Server Konfiguration"
+msgid "256 colors (8 bits)"
+msgstr "256 Farben (8 Bit)"
-#: ../../standalone/drakautoinst:1
+#: ../../any.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Letzten Eintrag entfernen?"
+msgid "Read-write"
+msgstr "Schreiben/Lesen"
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Eintrag hinzuf眉gen"
+msgid "Size: %s\n"
+msgstr "Gr枚脽e: %s\n"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Auto Install"
-msgstr "Auto-Installation"
+msgid "Hostname: "
+msgstr "Rechnername: "
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+msgid "Chunk size %s\n"
+msgstr "Blockgr枚脽e %s\n"
+
+#: ../../share/advertising/02-community.pl:1
+#, c-format
+msgid "Build the future of Linux!"
msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie k枚nnen die Installation nun automatisch durchf眉hren."
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Gratuliere!"
+msgid "Local Printer"
+msgstr "Lokaler Drucker"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"\n"
-"Willkommen.\n"
-"\n"
-"Die Parameter der Autoinstallation sind in den Abschnitten rechts verf眉gbar."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=datei] [--word=word] [--explain=ausdruck] [--alert]"
-#: ../../standalone/drakautoinst:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL Verbindung"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-"Bitte w盲hlen Sie f眉r jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchf眉hren wollen."
+"Keine Konfiguration. W盲hlen Sie dein Assistenten oder Fortgeschritten.\n"
#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
+msgid "Error!"
+msgstr "Fehler!"
-#: ../../standalone/drakautoinst:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "replay"
-msgstr "wiederholen"
+msgid "cable connection detected"
+msgstr "Kabel Verbindung gefunden"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"M枚glichkeit ist gef盲hrlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie k枚nnen mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
-"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen zu k枚nnen.\n"
-"\n"
-"Aus Sicherheitsgr眉nden wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgef眉hrt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
+msgid "/_Report Bug"
+msgstr "/_Fehler Melden"
-#: ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ich kann die ben枚tigte Abbild-Datei 鈥%s鈥 nicht finden."
+msgid "Resize"
+msgstr "Gr枚脽e ver盲ndern"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Fehler!"
+msgid "Dominica"
+msgstr "Dominikanische Republik"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Please enter the device name to use for backup"
+msgstr "Bitte geben Sie den Ger盲tenamen f眉r Archivierung an."
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Resolution: %s\n"
+msgstr "Aufl枚sung: %s\n"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "matching"
+msgstr "脺bereinstimmung mit"
+
+#: ../../install2.pm:1
+#, c-format
msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-"\n"
-"Wiederherstellungsprobleme:\n"
-"\n"
-"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
-"kontrollieren, bevor sie wiederhergestellt werden.\n"
-"Da vor der Wiederherstellung alle Dateien im \n"
-"Zielverzeichnis von DrakBackup gel枚scht werden, \n"
-"gehen alle darin entghaltenen Daten verloren! \n"
-"Seien Sie daher vorsichtig und 盲ndern Sie die Sicherungskopien \n"
-"nicht manuell.\n"
+"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
+"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
+"Installationsmedium 眉bereinstimmt (Bitte erstellen Sie eine neue "
+"Startdiskette). "
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"W盲hlen Sie bitte den richtigen Anschluss. So ist etwa der unter Windows\n"
+"鈥濩OM1鈥 genannte Anschluss in GNU/Linux unter 鈥瀟tyS0鈥 erreichbar."
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Die folgenden Pakete werden entfernt"
+
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Internetverbindung"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use existing partitions"
+msgstr "Verwende existierende Partition(en)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Kanada (Qu茅bec)"
+
+#: ../../Xconfig/various.pm:1
#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Mausschnittstelle: %s\n"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Reselect correct fonts"
+msgstr "Neuwahl korrekter Schriften"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"Options Description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
@@ -14342,171 +13198,418 @@ msgstr ""
"Rechner erstellt werden.\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"Options\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+"Options\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" Sie k枚nnen direkt bei Betriebssystemstart die grafische Umgebung\n"
+"aktivieren. Durch bet盲tigen der Schaltfl盲che 鈥%s鈥 wird in eine reine\n"
+"Textumgebung gestartet. Das ist sinnvoll f眉r Server oder wenn Sie bei dem\n"
+"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. W盲hlen Sie\n"
+"鈥%s鈥, um die grafische Umgebung vorzufinden."
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Wir werden nun die Verbindung 鈥%s鈥 konfigurieren."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Selbsterkennung von Druckern"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Konnte keine Schriften finden.\n"
+
+#: ../../steps.pm:1
+#, c-format
+msgid "Language"
+msgstr "Sprache ausw盲hlen"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer model selection"
+msgstr "Auswahl des Druckertyps"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Nach 脛nderung des Partitionstyps von %s, werden s盲mtliche Daten darauf "
+"gel枚scht"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d seconds"
+msgstr "%d Sekunden"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, c-format
+msgid "Insert a blank floppy in drive %s"
+msgstr "Legen Sie eine leere Diskette in das %s ein."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "A valid URI must be entered!"
+msgstr "Sie m眉ssen eine g眉ltige URI eingeben!"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Schnittstelle \"%s\" gefunden. Wollen Sie sie verwenden?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Re-configure interface and DHCP server"
+msgstr "Neu konfigurieren des Ger盲ts und des DHCP-Servers"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Sound configuration"
+msgstr "Sound Konfiguration"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "Foto-Testseite"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Custom disk partitioning"
+msgstr "Benutzerdefinierte Partitionierung"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter Printer Name and Comments"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The following printers\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Die folgenden Drucker\n"
"\n"
+"%s%s\n"
+"sind direkt an Ihr System angeschlossen."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "type: %s"
+msgstr "Typ: %s"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slowakei (QWERTY)"
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid "No Sound Card detected!"
+msgstr "Keine Soundkarte erkannt!"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Maus Port"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "FTP Server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm-Schriftkonvertierung"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Der Typ des Busses, an dem die Maus angeschlossen ist."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Uganda"
+msgstr "Uganda"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Argumente: (size)\n"
+"\n"
+"Setzen der Gr枚脽e des Kommandozeilenarchivs. Der Wert 鈥-1鈥 steht f眉r "
+"unbegrenzt."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used, because with incremental \n"
-"backups it is necessary to restore one by one each older backup.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"So if you don't want to restore a user please unselect all their\n"
-"check boxes.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"Otherwise, you are able to select only one of these.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-" - Incremental Backups:\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Parameter:\n"
+"Nun bekommen Sie eine Zusammenfassung verschiedener Informationen Ihres\n"
+"Systems. Je nach vorhandener Hardware sehen Sie hier (oder eben nicht) die\n"
+"folgende Eintr盲ge. Jeder Eintrag besteht aus einem konfigurierbaren Ger盲t\n"
+"gefolgt vom dessen aktuellen Zustand. Durch bet盲tigen der Schaltfl盲che 鈥%s鈥淺n"
+"k枚nnen Sie diesen 盲ndern.\n"
"\n"
-" - Systemdateien sichern:\n"
-" \n"
-"\tDiese Option erlaub es Ihnen Ihr 鈥/etc鈥 Verzeichnis\n"
-"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
-"\tsichern. Seien Sie vorsichtig, damit Sie w盲hrend der\n"
-"\tWiederherstellung folgende Dateien nicht 眉berschreiben:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
+" * 鈥%s鈥: Kontrollieren Sie die aktuelle Tastaturvorgabe und w盲hlen Sie die\n"
+"Schaltfl盲che, falls Sie die Vorgabe 盲ndern wollen.\n"
"\n"
-" - Benutzerdateien sichern:\n"
+" * 鈥%s鈥: 鈥%s鈥: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie\n"
+"sich befinden korrekt ist. Falls nicht, bet盲tigen Sie bitte die\n"
+"Schaltfl盲che 鈥%s鈥 und w盲hlen Sie den richtigen. Ist Ihr Staat nicht in der\n"
+"Liste, die Sie gezeigt bekommen, k枚nnen Sie 眉ber die Schaltfl盲che 鈥%s鈥 eine\n"
+"vollst盲ndigere Liste erzwingen.\n"
"\n"
-"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
-"\tzeichen zu w盲hlen, deren Daten gesichert werden\n"
-"\tsollen.\n"
-"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
-"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
+" * 鈥%s鈥: 鈥濪rakX鈥 versucht die Zeitzone anhand des gew盲hlten Staates zu\n"
+"setzen. Sollte diese Auswahl nicht korrekt sein (manche Staaten etwa\n"
+"眉berspannen mehrere Zeitzonen) k枚nnen Sie durch bet盲tige der Schaltfl盲che\n"
+"鈥%s鈥 Ihre lokale Zeitzone setzen.\n"
"\n"
-" - Andere Dateien sichern:\n"
+" * 鈥%s鈥: Kontrollieren Sie die konfigurierte Maus und bet盲tigen Sie, falls\n"
+"notwendig, die Schaltfl盲che.\n"
"\n"
-"\tMit dieser Option k枚nnen Sie weitere Dateienn\n"
-"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
-"\tverwenden, k枚nnen Sie momentan keine inkre-\n"
-"\tmentellen Aktualisierungen vornehmen.\n"
+" * 鈥%s鈥: Durch Anwahl der Schaltfl盲che 鈥%s鈥 startet den Druckerassistenten.\n"
+"Weitere Informationen zu diesem Assistenten erhalten Sie im Drucker-Kapitel\n"
+"des 鈥濻tarter Handbuch鈥. Das dort vorgestellte Programm entspricht dem\n"
+"w盲hrend der Installation angebotenen.\n"
"\n"
-" - Inkrementelle Archivierung:\n"
+" * 鈥%s鈥: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird sie\n"
+"hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
+"bet盲tigen Sie einfach die Schaltfl盲che, um sie zu korrigieren.\n"
"\n"
-"\tInkrementelle Archivierung ist die m盲chtigste\n"
-"\tder vorhandenen Optionen. Sie erlaubt es\n"
-"\tIhnen beim ersten Aufruf eine komplette\n"
-"\tSicherungskopie Ihres Systems zu erstellen und\n"
-"\tanschlie脽nd nur noch 脛nderungen zu speichern.\n"
-"\tSomit sind Sie in der Lage, w盲hrend des Wieder-\n"
-"\therstellens, den Datenbestand eines bestimmten\n"
-"\tZeitpunkts zu erzeugen.\n"
-"\tSollten sie diese Alernative nicht gew盲hlt haben,\n"
-"\twerden die alten Sicherungen vor dem Ertellen\n"
-"\teiner neuen Sicherungskopie gel枚scht.\n"
+" * 鈥%s鈥: DrakX richtet Ihre Grafikumgebung normalerweise in der Aufl枚sung\n"
+"鈥800脳600鈥 bzw. 鈥1024脳768鈥 ein. Sollte Ihnen das nicht zusagen, k枚nnen Sie\n"
+"es durch bet盲tigen der Schaltfl盲che 鈥%s鈥 盲ndern.\n"
"\n"
+" * 鈥%s鈥: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird sie hier\n"
+"angezeigt. Falls Sie eine TV-Karte besitzen, die hier nicht richtig erkannt\n"
+"wurde, k枚nnen Sie versuchen, diese manuell einzurichten. Bet盲tigen Sie\n"
+"einfach die Schaltfl盲che 鈥%s鈥.\n"
"\n"
+" * 鈥%s鈥: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, wird sie\n"
+"hier angezeigt. Durch Anwahl der Schaltfl盲che 鈥%s鈥渒枚nnen Sie die Parameter\n"
+"盲ndern.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie Ihren Internetzugang oder Ihr lokales Netzwerk nun\n"
+"einrichten wollen, k枚nnen Sie das hier tun.\n"
+"\n"
+" * 鈥%s鈥: Dieser Eintrag erm枚glicht es Ihnen, die Sicherheitsebene Ihres\n"
+"Systems zu 盲ndern, die Sie in einem fr眉heren Installationsschritt ()\n"
+"gew盲hlt haben.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie Ihren Rechner mit dem Internet verbinden wollen, ist es\n"
+"sinnvoll sich vor ungebetenen Eindringlingen durch einrichten einer\n"
+"Firewall zu sch眉tzen. Lesen Sie das entsprechende Kapitel im 鈥濻tarter\n"
+"Handbuch鈥, wenn Sie weitere Informationen ben枚tigen.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie die Konfiguration Ihres Betriebssystemstarters 盲ndern\n"
+"wollen, w盲hlen Sie diese Schaltfl盲che. Es sei angemerkt, dass dieser Punkt\n"
+"sich an fortgeschrittenere Nutzer richtet.\n"
+"\n"
+" * 鈥%s鈥: Sie k枚nnen hier die Dienste w盲hlen, die ab dem Start von Mandrake\n"
+"Linux zur Verf眉gung gestellt werden sollen. Wollen Sie den Rechner als\n"
+"Server verwenden, sollten Sie unbedingt einen Blick auf diese Liste werfen."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoren"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"options description:\n"
"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
"\n"
-" - Backup User files: \n"
"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Wir werden nun die Verbindung 鈥%s鈥 konfigurieren.\n"
"\n"
-" - Backup Other files: \n"
"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+"W盲hlen Sie 鈥濷K鈥, um fortzufahren."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot Modus"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (Kabel)"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgstr ""
+"Ich kann LILO nicht ausf眉hren!F眉hren Sie bitte mit dem privilegierten "
+"Benutzerkennzeichen 鈥瀕ilo鈥 in einer Konsole aus, um die Themen-Installation "
+"zu beenden."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generische 3 Tasten Maus"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select another media to restore from"
+msgstr "W盲hlen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Software-Verwaltung"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Restore Description:\n"
" \n"
+"Only the most recent date will be used, because with incremental \n"
+"backups it is necessary to restore one by one each older backup.\n"
+"\n"
+"So if you don't want to restore a user please unselect all their\n"
+"check boxes.\n"
+"\n"
+"Otherwise, you are able to select only one of these.\n"
+"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"Parameter:\n"
@@ -14552,4798 +13655,5704 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Einige der Sendmail-Fehler beruhen auf einer\n"
-" fehlerhaften PostFix Konfiguration. Um sie zu\n"
-" beheben m眉ssen Sie 鈥瀖yhostname鈥 oder 鈥瀖ydomain鈥淺n"
-" in 鈥/etc/postfix/main.cf鈥 korrigieren.\n"
-"\n"
+msgid "Re-submit"
+msgstr "Erneut verschicken"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" In diesem Schritt erlaubt Ihnen DrakBackup folgende 脛nderungen:\n"
-"\n"
-" - Kompressionsmodus:\n"
-" \n"
-" Mit der 鈥瀊zip2鈥 Kompression, werden Ihre Daten\n"
-" besser als mit 鈥瀏zip鈥 komprimiert (ca. 2-10 %%).\n"
-" Standardm盲脽ig ist dier Modus deaktiviert, da er\n"
-" mehr Zeit ben枚tigt (bis zu 1.000%%).\n"
-" \n"
-" - Aktualisierungsmodus:\n"
-"\n"
-" Mit dieser Option k枚nnen Sie Ihre Sicherungskopie\n"
-" aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
-" da Sie Ihre Kopie auspacken m眉ssen, um sie \n"
-" aktualisieren zu k枚nnen.\n"
-" \n"
-" - Der 鈥.backupignore鈥-Modus:\n"
-"\n"
-" Wie bei dem Programm 鈥瀋vs鈥, wird DrakBackup alle\n"
-" Dateien/Ordner, die in der Datei 鈥.backupignore鈥淺n"
-" des aktuellen Verzeichnisses aufgef眉hrt sind,\n"
-" von der Sicherung ausschlie脽en.\n"
-" Beispiel:\n"
-" > cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Aktuelle CD - fortfahren."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "DrakBackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Wiederherstellen"
+msgid "Network & Internet"
+msgstr "Netzwerk & Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Jetzt sichern"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litauen (QWERTY - Phonetisch)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Expertenkonfiguration"
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Assistentengest眉tzte Konfiguration"
+msgid "Sharing of local scanners"
+msgstr "Gemeinsamer Zugriff auf lokale Scanner"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Sicherungskonfiguration anzeiegen"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Das Plug'n'Play testen schlug fehl. Bitte w盲hlen Sie einen Monitor."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
+msgid "Services and deamons"
+msgstr "Dienste und D盲monen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup Konfiguration"
+msgid "Remote host name missing!"
+msgstr "Der Name des entfernten Rechners fehlt!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Fortschritt"
+msgid "with /usr"
+msgstr "mit 鈥/usr鈥"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Dateien 眉bertragen ..."
+msgid "Network"
+msgstr "Netzwerk"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "Daten眉agung via FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Selbsterkennung von Druckern, die an Windows Rechnern h盲ngen"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Andere Dateien sichern"
+msgid "This password is too simple"
+msgstr "Dieses Passwort ist zu einfach"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Benutzerdateien sichern"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slowakei (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Systemdateien sichern"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Extrem minimale Installation (ohne 鈥瀠rpmi鈥)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Keine Konfigurationsdatei gefunde.\n"
-"Bitte w盲hlen Sie den 鈥濧ssistenten鈥 oder 鈥濫rweitert鈥."
+" 脺bertragung \n"
+"Jetzt"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Bitte w盲hlen Sie die zu sichernden Daten..."
+msgid "Use daemon"
+msgstr "D盲mon verwenden"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Bitte w盲hlen Sie ein Sicherungsmedium..."
+msgid "Authentication"
+msgstr "Authentifizierung"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Bitte w盲hlen Sie die wiederherzustellenden Daten..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Diesen Drucker f眉r StarOffice/OpenOffice.org/GIMP hinzuf眉gen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die folgenden Pakete m眉ssen installiert werden:\n"
+msgid "Additional CUPS servers: "
+msgstr "Weitere CUPS-Server: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Fehler bei der 脺ertragung via FTP.\n"
-" Bitte korrigieren Sie Ihre FTP-Konfiguration."
+"W盲hlen Sie einen der automatisch erkanneten Drucker aus der Liste oder geben "
+"Sie den Hostnamen oder die IP-Adresse und optional die Portnummer (wenn Port "
+"nicht angegeben, wird 9100 verwendet) ein."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Wo wollen Sie 鈥%s鈥 einh盲ngen?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "脺ber Netzwerk wiederherstellen"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algerien"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Gr枚脽e der Init-RamDisk"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Sendmail Fehler\n"
-" Ihre Bericht-Mail konnte nicht versandt werden.\n"
-" Bitte richten Sie Sendmail ein."
+"Falls f眉r Ihre Karte verschiedene Server zur Verf眉gung stehen, etwa mit und\n"
+"ohne 3D-Beschleunigung, werden Sie gebeten, den zu w盲hlen, der Ihren\n"
+"Bed眉rfnissen am besten entspricht."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Weiter"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tSicherungen verwenden 鈥瀟ar鈥 und 鈥瀏zip鈥淺n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "<- Zur眉ck"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Speichern"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation keine Fragen im MandrakeUpdate Modus stellen\n"
+" --no-verify-rpm Paketsignaturen nicht 眉berpr眉fen\n"
+" --changelog-first 脛nderungsprotokoll vor Dateiliste anzeigen\n"
+" --merge-all-rpmnew Zusammenlegen aller .rpmnew/.rpmsave Dateien "
+"vorschlagen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Sicherung erstellen"
+msgid "Setting Default Printer..."
+msgstr "Standarddrucker w盲hlen ..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Wiederherstellungs-Fortschritt"
+msgid "Interface %s (using module %s)"
+msgstr "Schnittstelle %s (verwendet Modul %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Wiederherstellen aus Katalog"
+msgid "Name: %s\n"
+msgstr "Name: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Zum neuen Wiederherstellungsverzeichnis wechseln"
+msgid "Generating preview ..."
+msgstr "Vorschau erzeugen ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Aktuelle CD - fortfahren."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Die Frequenz sollte entweder eine Mengengeneinheit aus 鈥歬鈥, 鈥歁鈥 und 鈥欸鈥 "
+"nutzen (etwa 鈥2.46G鈥 f眉r 2,46GHz) oder die entsprechende Anzahl Nullen "
+"angeh盲ngt werden."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Benutzergef眉hrte Wiederherstellung"
+msgid "serial"
+msgstr "Seriell"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Alle Sicherungen wiederherstellen"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Wiederherstellen fehlgeschlagen..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgien (Lateinisches Layout)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Dateien wiederhergestellt..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Pfad oder Modul ben枚tigt"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Sie k枚nnen nun die Optionen f眉r Modul %s angeben.\n"
+"Denken Sie daran, dass Adressen mit 鈥0x鈥 beginnen m眉ssen, etwa 鈥0x300鈥"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Rechnername n枚tig"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Benutzerkennzeichen n枚tig"
+msgid "Kenya"
+msgstr "Kenia"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Passwort n枚tig"
+msgid "Use ``Unmount'' first"
+msgstr "Verwenden Sie erst 鈥瀠mount鈥"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Installing mtools packages..."
+msgstr "Installiere mtools Pakete..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Rechnername"
+msgid "You must specify a root partition"
+msgstr "Sie m眉ssen die Verzeichnisbaumwurzel festlegen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Wiederherstellen mit Netzwerkprotokoll: %s"
+msgid "first step creation"
+msgstr "Erter Schritt Erstellung"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "脺ber Netzwerk wiederherstellen"
+msgid "Both Shift keys simultaneously"
+msgstr "Beide Umschalttasten gleichzeitig"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Select a scanner model"
+msgstr "W盲hlen Sie einen Scanner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Von Band wiederherstellen"
+msgid "Drakbackup Configuration"
+msgstr "DrakBackup Konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Speichern unter..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
+"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
+"Starten Sie den Konfigurationsassistenten im Hauptfenster."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Von CD wiederherstellen"
+msgid "Korea (North)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Backup-Dateien nicht unter %s gefunden."
+msgid "Autologin"
+msgstr "Autologin"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"脛ndern\n"
-"Pfad wiederherstellen"
+msgid "System configuration"
+msgstr "Systemkonfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Paswort des Administrators"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Markierte Dateien\n"
-"wiederherstellen"
+"Mandrake Linux 9.1 bietet 11 Arbeitsumgebungen, die Sie nach Ihren W眉nschen "
+"gestalten k枚nnen, darunter: KDE 3, Gnome 2 und WindowMaker"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Drucker konfigurieren ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Erstelle Sicherung vor dem Wiederherstellen (nur f眉r inkrementelle "
-"Sicherungen)."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Pfad zum Wiederherstellen ausw盲hlen (anstatt /)"
+msgid "Virgin Islands (British)"
+msgstr "Jungferninseln (britisch)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Sonstiges wiederherstellen"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Benutzerkennzeichen wiederherstellen"
+msgid "click here if you are sure."
+msgstr "Klicken Sie hier, wenn Sie sicher sind."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "System wiederherstellen"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Keine Konfigurationsdatei gefunde.\n"
+"Bitte w盲hlen Sie den 鈥濧ssistenten鈥 oder 鈥濫rweitert鈥."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Anderes Medium"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Sie erhalten die Liste, der auf Ihren Festplatten gefundenen GNU/Linux\n"
+"Partitionen. Sie k枚nnen die Auswahl des Assistenten beibehalten - sie\n"
+"sollte normalerweise Ihren Bed眉rfnissen entsprechen. Falls Sie es vorziehen\n"
+"die Einh盲ngpunkte selbst zu definieren, denken Sie bitte daran, dass Sie\n"
+"zumindest eine Verzeichnisbaumwurzel (鈥/鈥) ben枚tigen. W盲hlen Sie die\n"
+"Partitionen nicht zu klein, da Sie sonst nicht gen眉gend Programme\n"
+"installieren k枚nnen. Wenn Sie Ihre pers枚nlichen Daten auf einer eigenen\n"
+"Partition halten wollen, legen Sie sich eine Partition namens 鈥/home鈥 an.\n"
+"\n"
+"Die Partitionen werden folgenderma脽en aufgelistet: 鈥濶ame鈥, 鈥濳apazit盲t鈥.\n"
+"\n"
+"鈥濶ame鈥 hat folgende Struktur: 鈥濬estplattentyp鈥, 鈥濬estplattennummer鈥,\n"
+"鈥濸artitionsnummer鈥 (etwa 鈥瀐da1鈥).\n"
+"\n"
+"鈥濬estplattentyp鈥 ist 鈥瀐d鈥, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
+"鈥瀞d鈥, wenn es sich um eine SCSI-Platte handelt.\n"
+"\n"
+"鈥濬estplattennummer鈥 ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
+"IDE-Platten bedeutet:\n"
+"\n"
+" * 鈥瀉鈥 bedeutet 鈥濵aster-Platte am prim盲ren IDE-Controller鈥;\n"
+"\n"
+" * 鈥瀊鈥 bedeutet 鈥濻lave-Platte am prim盲ren IDE-Controller鈥;\n"
+"\n"
+" * 鈥瀋鈥 bedeutet 鈥濵aster-Platte am sekund盲ren IDE-Controller鈥;\n"
+"\n"
+" * 鈥瀌鈥 bedeutet 鈥濻lave-Platte am sekund盲ren IDE-Controller鈥;\n"
+"\n"
+"Bei SCSI-Platten steht 鈥瀉鈥 f眉r 鈥瀗iedrigste SCSI-ID鈥, 鈥瀊鈥 f眉r\n"
+"鈥瀦weitniedrigste SCSI-ID鈥, etc."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "W盲hlen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
+msgid "Remove"
+msgstr "Entfernen"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Von Festplatte wiederherstellen"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Quota f眉r Backup-Datei verwenden."
+msgid "Pipe job into a command"
+msgstr "Den Auftrag an ein Kommando weiterleiten"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Bitte geben Sie die Maximalgr枚脽e \n"
-"f眉r DrakBackup an."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "Neuer vom DevFS des Kerns vergebener dynamischer Ger盲tename"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
+msgid "Yes"
+msgstr "Ja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Auf Festpaltte sichern"
+msgid "Cote d'Ivoire"
+msgstr "Elfenbeink眉ste"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Bitte w盲hlen Sie, welches Datum wiederhergestellt werden soll."
+msgid "Which protocol do you want to use?"
+msgstr "Welches Protokoll wollen Sie verwenden?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Systemdateien sichern vor:"
+msgid "Restore Progress"
+msgstr "Wiederherstellungs-Fortschritt"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Estonia"
+msgstr "Estland"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
-"wichtig)"
+"W盲hlen Sie den Rechner, dem der lokale Scanner bekannt gemacht werden sollen:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK, die 眉brigen Dateien zu aktualisieren."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
+"den ich nicht ansprechen kann. Die einzige L枚sung ist, dass Sie \n"
+"Ihre prim盲ren Partitionen so verschieben, dass der Bereich direkt \n"
+"neben der erweiterten Partition zu liegen kommt."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Konfiguration wiederherstellen "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " erfolgreich auf %s wiederhergestellt "
+msgid "Add"
+msgstr "Hinzuf眉gen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Alle Ihre gew盲hlten Daten wurden "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Die Sicherungen sind besch盲digt."
+msgid " Error while sending mail. \n"
+msgstr " Fehler beim Verschicken der E-Mail. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Bitte entfernen Sie die Markierung oder l枚schen Sie sie das n盲chste Mal."
+msgid "Keyboard"
+msgstr "Tastatur"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Liste der besch盲digten Daten:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Liste der wiederherzustellenden Daten:\n"
-"\n"
+"Die Rate sollte entweder eine Mengengeneinheit aus 鈥歬鈥, 鈥歁鈥 und 鈥欸鈥 nutzen "
+"(etwa 鈥11M鈥 f眉r 11M) oder die entsprechende Anzahl Nullen angeh盲ngt werden."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Keine Konfiguration. W盲hlen Sie dein Assistenten oder Fortgeschritten.\n"
+msgid "Choose the connection you want to configure"
+msgstr "W盲hlen Sie die Verbindung, die Sie konfigurieren wollen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t- Netzwerk per webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Bitte warten, Sicherheitsebene wird eingestellt..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t- Netzwerk per rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 ist die ultimative Entwicklungsplattform."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t- Netzwerk per SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Konfigurieren der Netzwerkkarte %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t- Netzwerk per FTP.\n"
+msgid "activated"
+msgstr "aktiviert"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"Bitte w盲hlen Sie, welches Netzwerkger盲t f眉r den DHCP-Server verwendet wird."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t- CD-ROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Finden der zu aktualisierenden Pakete ..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t- Festplatte.\n"
+msgid "Mount point: "
+msgstr "Einh盲ngpunkt: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- D盲mon (%s) enth盲lt:\n"
+msgid "parse all fonts"
+msgstr "Alle Schriften analysieren"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSicherungen verwenden 鈥瀟ar鈥 und 鈥瀏zip鈥淺n"
+msgid "With X"
+msgstr "Mit X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSicherungen verwenden 鈥瀟ar鈥 und 鈥瀊zip2鈥淺n"
+msgid "Multi-head configuration"
+msgstr "Mehrmonitor-Einstellung"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tKeine Systemdateien\n"
+msgid "No browser available! Please install one"
+msgstr "Kein Browser installiert! Bitte installieren Sie einen."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Die 脛nderungen beibehalten?\n"
+"Momentan w盲re dies:\n"
"\n"
-"- Optionen:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
-"\t\t Benutzer: %s\n"
-"\t\t Pfad: %s \n"
+"Sie k枚nnen ReiserFS nicht f眉r Partitionen verwenden, die kleiner als 32MB "
+"sind!"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- via %s auf Rechner %s sichern\n"
+"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
+"momentan angemeldeter Benutzerkennzeichen 眉bermittelt zu bekommen \n"
+"(盲hnlich wie finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Name der Dom盲ne"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Sharing of local printers"
+msgstr "Gemeinsamer Zugriff auf lokale Drucker"
+
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Available printers"
+msgstr "Vorhandene Drucker"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Leer"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save to Tape on device: %s"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (das X Window System) ist das Herz der grafischen Benutzeroberfl盲che von\n"
+"GNU/Linux. Es bildet die Grundlage f眉r die Vielzahl grafischer\n"
+"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
+"AfterStep oder WindowMaker). Auch hier wird 鈥濪rakX鈥 die Konfiguration\n"
+"soweit wie m枚glich selbstst盲ndig vollziehen.\n"
"\n"
-"- Auf Band an Ger盲t %s sichern"
+"Sie erhalten eine Liste m枚glicher Parameter, mit deren Hilfe Sie die\n"
+"Grafikausgabe 盲ndern k枚nnen:\n"
+"\n"
+"Grafikkarte\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
+"entsprechend ein. Sollten dabei Probleme auftreten, k枚nnen Sie in der hier\n"
+"aufgef眉hrten Liste Ihr Modell ausw盲hlen.\n"
+"\n"
+" Falls f眉r Ihre Karte verschiedene Server zur Verf眉gung stehen, etwa mit\n"
+"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu w盲hlen, der Ihren\n"
+"Bed眉rfnissen am besten entspricht.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
+"Probleme auftreten, k枚nnen Sie in der hier aufgef眉hrten Liste Ihr Modell\n"
+"ausw盲hlen.\n"
+"\n"
+"\n"
+"\n"
+"Aufl枚sung\n"
+"\n"
+" Sie k枚nnen hier Aufl枚sung und Farbtiefe f眉r Ihre Hardware w盲hlen.\n"
+"Entscheiden Sie sich, welche Variante Ihren W眉nschen am ehesten entspricht\n"
+"(Sie k枚nnen diese Angaben nat眉rlich nach der Installation noch 盲ndern). Sie\n"
+"k枚nnen sich einen Eindruck anhand des abgebildeten Monitors bilden.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" DrakX versucht eine Testbild mit denen von Ihnen gew眉nschten\n"
+"Einstellungen zu 枚ffnen. Falls Sie w盲hrend des Tests einen Dialog sehen, in\n"
+"dem Sie gefragt werden, ob sie die getroffenen Einstellungen behalten\n"
+"wollen, antworten Sie mit 鈥%s鈥, damit DrakX mit dem n盲chsten\n"
+"Installationsschritt fortf盲hrt. Sollten Sie die Nachricht nicht sehen,\n"
+"bedeutet das, dass eine oder mehrere getroffene Einstellungen nicht korrekt\n"
+"sind. Nach 12 Sekunden sollten Sie wieder das Installationsmen眉 sehen. Sie\n"
+"k枚nnen nun die Einstellungen 盲ndern, bis Sie das Testbild sehen.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Sie k枚nnen direkt bei Betriebssystemstart die grafische Umgebung\n"
+"aktivieren. Durch bet盲tigen der Schaltfl盲che 鈥%s鈥 wird in eine reine\n"
+"Textumgebung gestartet. Das ist sinnvoll f眉r Server oder wenn Sie bei dem\n"
+"Versuch die grafische Umgebung zu konfigurieren erfolglos waren. W盲hlen Sie\n"
+"鈥%s鈥, um die grafische Umgebung vorzufinden."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " (multi-session)"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " an Ger盲t: %s"
+msgid "Where do you want to mount device %s?"
+msgstr "Wo wollen Sie das Ger盲t %s einh盲ngen?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "RW"
-msgstr ""
+msgid "The default lease (in seconds)"
+msgstr "Standard-IP-Verleihdauer (in Sekunden)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Schnittstelle: 鈥%s鈥"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "With basic documentation (recommended!)"
+msgstr "Mit minimaler Dokumentation (Empfohlen)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Auf Festplatte sichern unter: %s\n"
+msgid "1 button"
+msgstr "1 Taste"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Other Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Sonstige Dateien:\n"
+"Ich konnte %d unbekannte Drucker direkt an Ihrem Rechner finden."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Benutzerdateien:\n"
+msgid "Test"
+msgstr "Test"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- System Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"- Systemdateien:\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sicherungsquellen: \n"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Benutzerkennzeichen ausw盲hlen"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Ihre Wahl? (Standard 鈥%s鈥 %s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Benutzerkennzeichen sichern"
+msgid "Raw printer"
+msgstr "Rohdaten-Drucker"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup system"
-msgstr "System sichern"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Offizieller Herstellername der CPU"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Bitte w盲hlen Sie, was Sie sichern wollen"
+msgid "Vendor"
+msgstr "Hersteller"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Interface %s"
+msgstr "Schnittstelle: %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Maus konfigurieren"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "across Network"
-msgstr "眉ber Netzwerk"
+msgid "Choose the mount points"
+msgstr "W盲hlen Sie die Einh盲ngpunkte"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "on Hard Drive"
-msgstr "auf Festplatte"
+msgid "OK"
+msgstr " Ok "
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Bitte w盲hlen Sie wohin Sie die Sicherungskopien machen wollen."
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslawien (Lateinisches Layout)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "More Options"
-msgstr "Mehr Parameter"
+msgid "Installing"
+msgstr "Installation wird durchgef眉hrt"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "When"
-msgstr "Wann"
+msgid "Launch userdrake"
+msgstr "Userdrake starten"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Where"
-msgstr "Wo"
+msgid "Is this an install or an upgrade?"
+msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Interne ISDN Karte"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "What"
-msgstr "Was"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren 鈥濩ommunity鈥-"
+"Seiten finden, um Ihre wissen mit Anderen zu teilen."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"Herzlichen Gl眉ckwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
+"\n"
+"Die Konfiguration wird nun in Ihr System integriert.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
+msgid "\t-Hard drive.\n"
+msgstr "\t- Festplatte.\n"
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Stellen Sie sicher, dass der Cron-D盲mon als Dienst aktiviert ist.\n"
+"Dieser Schritt wird nur aufgerufen, wenn mindestens eine GNU/Linux\n"
+"Partition auf Ihren Festplatten gefunden wird.\n"
"\n"
-"Beachten Sie, dass zur Zeit alle \"Netzmedien\" auch die Festplatte "
-"verwenden."
+"DrakX fragt Sie nun nach der gew眉nschten Installationsart. Sie haben die\n"
+"Wahl zwischen einer Aktualisierung einer bereits vorhandenen Mandrake\n"
+"Linux-Version oder einer kompletten Neuinstallation:\n"
+"\n"
+" * 鈥%s鈥: Entfernt komplett 盲ltere Versionen von Mandrake Linux, die noch\n"
+"installiert sind - um genau zu sein, k枚nnen Sie je nach aktuellem Inhalt\n"
+"Ihrer Platte auch einige 盲ltere Linux- oder anderweitige Partitionen\n"
+"unangetastet behalten.\n"
+"\n"
+" * 鈥%s鈥: Mit dieser Variante k枚nnen Sie eine existierende Mandrake Linux\n"
+"Version aktualisieren. Die Partitionstabellen sowie die pers枚nlichen\n"
+"Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
+"Installationsschritte werden wie bei einer Installation ausgef眉hrt.\n"
+"\n"
+"Aktualisierungen von Mandrake Linux 鈥8.1鈥 oder neueren Systemen sollten\n"
+"problemlos funktionieren. 脛ltere Versionen von Mandrake Linux sollten Sie\n"
+"nicht zu aktualisieren versuchen."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Bitte w盲hlen Sie ein\n"
-"Sicherungsmedium."
+msgid "Printer on remote CUPS server"
+msgstr "Drucker an CUPS-Server auf der Gegenseite"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Bitte w盲hlen Sie das Zeitintervall \n"
-"zwischen zwei Sicherungen."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Fehler beim Entfernen von 鈥%s鈥 f眉r StarOffice/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "D盲mon verwenden"
+msgid "delete"
+msgstr "l枚schen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "monatlich"
+msgid "here if no."
+msgstr "Hier, falls nicht."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Rechnername"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
-msgstr "w枚chendlich"
+msgid "The maximum lease (in seconds)"
+msgstr "Maximale IP-Verleihdauer (in Sekunden)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr "t盲glich"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Bitte w盲hlen Sie den seriellen Anschluss, an dem Ihre Maus h盲ngt."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr "st眉ndlich"
+msgid "Did it work properly?"
+msgstr "War der Ausdruck korrekt?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Festplatte/NFS"
+msgid "Poor"
+msgstr "Schwach"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Geben Sie an, ob sie Ihr Band nach dem Backup auswerfen wollen."
+msgid "Unsafe"
+msgstr "Unsicher"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Geben Sie an, ob sie Ihr Band vor dem Backup l枚schen wollen."
+msgid ", %s sectors"
+msgstr ", %s Sektoren"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Geben Sie an, ob sie das nicht-zur眉ckspulende Ger盲t verwenden wollen."
+msgid "No"
+msgstr "Nein"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Bitte geben Sie den Ger盲tenamen f眉r Archivierung an."
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Auf Bandlaufwerk sichern"
+msgid "Guadeloupe"
+msgstr "Gouadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Kein CD-Ger盲t angegeben!"
+msgid "could not find any font.\n"
+msgstr "Konnte keine Schriften finden.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Bitte geben Sie den Ger盲tenamen \n"
-"Ihres Brenners an, etwa 鈥0,1,0鈥."
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Wollen Sie, dass die R眉cktaste auf den Konsolen Entfernen sendet?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Geben Sie an, ob sie ein DVDRAM-Ger盲t verwenden"
+msgid "Vertical refresh rate"
+msgstr "Vertikale Wiederholfrequenz"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Geben Sie an, ob sie ein DVDR-Ger盲t verwenden"
+msgid "Entering step `%s'\n"
+msgstr "Beginn von Schritt 鈥%s鈥淺n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Jetzt l枚schen"
+msgid "Logitech MouseMan"
+msgstr "Logitech MausMan/FirstMaus"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Geben Sie an, ob sie Ihr RW-Medium l枚schen wollen (erste Sitzung)"
+msgid "Removing %s ..."
+msgstr "Entferne %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "f眉r Multisession-CD markieren"
+msgid "No printer"
+msgstr "Kein Drucker"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Bitte w盲hlen Sie die Gr枚脽e des CD/DVD Mediums (MByte)"
+msgid "alert configuration"
+msgstr "Benachrichtigungskonfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "Optionen f眉r NetWare-Drucker"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Sicherungskopie auf CD/DVDROM"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) Vorschau"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Brauche Rechnername, Nutzername und Passwort!"
+msgid "General"
+msgstr "Allgemein"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Passwort behalten"
+msgid "Printing system: "
+msgstr "Drucksystem: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Bitte geben Sie Ihr Passwort ein"
+msgid "Add a user"
+msgstr "Benutzer hinzuf眉gen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your login"
-msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
+msgid "Network configuration (%d adapters)"
+msgstr "Netzwerk Konfiguration (%d Karten)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Bitte geben Sie das Verzeichnis (oder Modul) an,\n"
-" in dem die Archive auf diesem Rechner erstellt werden sollen."
+msgid "Mandatory package %s is missing"
+msgstr "Das zwingend ben枚tigte Paket 鈥%s鈥 fehlt."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Rechnernamen oder IP eingeben."
+msgid "Philippines"
+msgstr "Philippinen"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Ok"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" 脺bertragung \n"
-"Jetzt"
+msgid "Print Queue Name"
+msgstr "Name der Druckerwarteschlange"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "M枚chten Sie 鈥瀉boot鈥 verwenden?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Wei脽russland"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
+"PDQ unterst眉tzt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
+"Drucker.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Move files to the new partition"
+msgstr "Dateien auf die neue Partition verschieben."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Net Method:"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Netzwerkverbindung zur Datensicherung verwenden"
+msgid "Restore From Catalog"
+msgstr "Wiederherstellen aus Katalog"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Users"
-msgstr "Benutzer"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
+msgid "group :"
+msgstr "Gruppe :"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../fs.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Markierte entfernen"
+msgid "mounting partition %s in directory %s failed"
+msgstr "Das Einh盲ngen der Partition %s in das Verzeichnis %s schlug fehl."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Die Browser-Caches nicht archivieren."
+msgid "Lilo screen"
+msgstr "LILO-Men眉"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Bitte w盲hlen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
+msgid "LILO with graphical menu"
+msgstr "LILO mit grafischem Men眉"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Estimating"
+msgstr "Sch盲tzung"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
msgstr ""
-"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
-"鈥/etc鈥 Verzeichnisses wiederherzustellen."
+"Sie k枚nnen dieses Paket nicht aus der Auswahl entfernen. \n"
+"Es ist bereits installiert!"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Keine kritischen Dateien (passwd, group, fstab)"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", Drucker 鈥%s鈥 an SMB/Windows Server 鈥%s鈥"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Inkrementelles Backup (alte Backups nicht 眉berschreiben)"
+msgid "Go on anyway?"
+msgstr "Wollen Sie trotzdem fortfahren?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sichern Ihrer Systemdateien (Verzeicnis /etc)."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Suche nach vorhandenen Paketen und aktualisieren der RPM-Datenbank ..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Does not appear to be recordable media!"
msgstr ""
-"Diese Optionen k枚n alle Ihre Dateien im Verzeichnis 鈥/etc鈥 sichern und "
-"wiederherstellen\n"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Specify options"
+msgstr "Optionen angeben"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Sie m眉ssen entweder Den Servernamen oder seine IP-Adresse angeben!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Mit einer individuellen Startdiskette k枚nnen Sie Ihr LINUX-System starten, \n"
+"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
+"n眉tzlich, \n"
+"wenn Sie SILO nicht auf Ihrem System installieren m枚chten, wenn ein \n"
+"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
+"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
+"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
+"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
+"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
+"kann.\n"
"\n"
-"Bitte w盲hlen Sie alle ben枚tigten Parameter.\n"
+"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
+"ohne relevante Daten in ihr erstes Laufwerk und dr眉cken Sie 鈥濷K鈥."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-"W盲hlen Sie die Dateien oder Verzeichnisse und bet盲tigen Sie die Schaltfl盲che "
-"鈥濰inzuf眉gen鈥"
+"Sie k枚nnen kein verschl眉sseltes Medium f眉r den Einh盲ngpunkt %s verwenden."
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Dateiauswahl"
+msgid "Norfolk Island"
+msgstr "Norfolkinsel"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "Die Installation des Themas schlug fehl!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Fehler beim Verschicken der E-Mail. \n"
+msgid "Nothing to do"
+msgstr "Nichts zu tun."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Als Loopback verwenden"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake BugReport Werkzeug"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "PPPOE verwenden"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Dateien auf die neue Partition verschieben."
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Fortgeschritten"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "脺bertragen"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Schweden)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "More Options"
+msgstr "Mehr Parameter"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-"\n"
-" FTP Verbindungsproblem: Es war nicht m枚glich, Ihre Dateien per FTP zu "
-"眉bertragen.\n"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"Dateiliste gesendet per FTP: %s\n"
-" "
+"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
+"zu vordefinierten regelm盲脽igen Zeiten abzuarbeiten. \n"
+"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
+"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Keine 脛nderungen zu sichern!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Backup-Dateien auf der Festplatte ..."
+msgid "Add Client -->"
+msgstr "Klient hinzuf眉gen -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Andere Dateien sichern ..."
+msgid "Read carefully!"
+msgstr "Lesen Sie bitte aufmerksam!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Festplattenbackup in Bearbeitung ..."
+msgid "RW"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Benutzerdateien sichern ..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Systemdateien sichern ..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "No kernel selected!"
+msgstr "Kein Kern ausgew盲hlt!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Zum Starten des BS dr聛cken Sie <Return>. Mit <e> k聰nnen Sie das"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "The encryption keys do not match"
+msgstr "Die Passw枚rter stimmen nicht 眉berein"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr "Rechte 鈥濿indows鈥-Taste"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Lesen Sie bitte aufmerksam die Lizenz, bevor Sie fortfahren. Sie umfasst\n"
+"die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen Punkten\n"
+"zustimmen, bet盲tigen Sie bitte die Schaltfl盲che 鈥%s鈥, um die Installation\n"
+"abzubrechen. Um mit der Installation fortzufahren, bet盲tigen Sie die\n"
+"Schaltfl盲che 鈥%s鈥."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
msgstr ""
+"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
+"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Fortschritt"
+msgid "Resolutions"
+msgstr "Aufl枚sungen"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall configurator\n"
"\n"
-"without being prompted for a password."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
+"DrakFirewall Konfigurierer\n"
+"\n"
+"Hiermit konfigurieren Sie eine pers枚nliche Firewall f眉r diesen\n"
+"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
+"Firewall-L枚sung interessiert sein, schauen Sie sich nach der speziell\n"
+"daf眉r entwickelten MandrakeSecurity Firewall Distribution um."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
+msgid ""
+"Please enter your username, password and domain name to access this host."
msgstr ""
+"Bitte geben Sie Benutzerkennzeichen, Passwort und Dom盲ne des Rechners an."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr ""
+msgid "Remove selected host"
+msgstr "L枚schen des markierten Rechners"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Network configuration"
+msgstr "Netzwerk Konfiguration"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Schlechtes Passwort auf %s"
+msgid "No sharing"
+msgstr "Kein Teilen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
+msgid "Please check if you are using a DVDR device"
+msgstr "Geben Sie an, ob sie ein DVDR-Ger盲t verwenden"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "L枚schen"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-"\n"
-" DrakBackup D盲mon Report\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
+"automatisch die grafische Oberfl盲che (= der X Server) aktiviert wird.\n"
+"Wollen Sie, dass X nach jedem Neustart direkt zur Verf眉gung steht?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr " Diskette erstellen "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Trenne %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr ""
+msgid "Status:"
+msgstr "Status:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "HTTP Proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
+msgid "SSH Server"
+msgstr "SSH Server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Nein ich will kein Autologin"
+msgid "\t-Network by rsync.\n"
+msgstr "\t- Netzwerk per rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser Oberfl盲che"
+msgid "European protocol"
+msgstr "Europ盲isches Protokoll"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "X-Window nach dem Hochfahren automatisch starten "
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", Drucker 鈥%s鈥, auf Server 鈥%s鈥"
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "System-Modus"
+msgid "Error"
+msgstr "Fehler"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Startschirm"
+msgid "allow \"su\""
+msgstr "鈥瀞u鈥 erlauben"
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "LILO-Men眉"
+msgid "Australia"
+msgstr "Australien"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"W盲hlen Sie sich\n"
-"das Aussehen von\n"
-"LILO und dem\n"
-"Startschirm.\n"
-"Sie k枚nnen\n"
-"unterschiedliche\n"
-"Varianten w盲hlen."
+msgid "please wait during ttmkfdir..."
+msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Themen"
+msgid "Configure only card \"%s\"%s"
+msgstr "Nur Karte 鈥%s鈥 (%s) konfigurieren"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Startschirmauswahl"
+msgid "Level"
+msgstr "Ebene"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Sie verwenden momentan 鈥%s鈥 als Betriebssystemstarter.\n"
-"W盲hlen Sie 鈥濳onfigurieren鈥, wenn Sie den Assistenten starten wollen."
+msgid "Change the printing system"
+msgstr "Drucksystem 盲ndern"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Installation des LILO- und Start-Themas erfolgreich."
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Ihr System unterst眉tzt die gleichzeitige Verwendung mehrerer Monitore.\n"
+"Was wollen Sie?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Die Installation des Themas schlug fehl!"
+msgid "Configure services"
+msgstr "Dienste konfigurieren"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Anmerkung"
+msgid "Broadcast Address:"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "LILO ausf眉hren"
+msgid "mount failed: "
+msgstr "Fehler beim Einh盲ngen: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Ich kann LILO nicht ausf眉hren!F眉hren Sie bitte mit dem privilegierten "
-"Benutzerkennzeichen 鈥瀕ilo鈥 in einer Konsole aus, um die Themen-Installation "
-"zu beenden."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Erstellen der RamDisk: 鈥瀖kinitrd -f /boot/initrd-%s.img %s鈥."
+msgid "Image"
+msgstr "Kern"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Ich kann 鈥瀖kinitrd -f /boot/initrd-%s.img %s鈥 nicht ausf眉hren."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Fehler beim Hinzuf眉gen von 鈥%s鈥 f眉r StarOffice/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Fernwartung"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr "Ich kann 鈥/etc/sysconfig/bootsplash鈥 nicht anlegen."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
+"Die PCMCIA-Unterst眉tzung f眉r 2.2er Kerne wurde eingestellt. Verwenden Sie "
+"bitte einen 2.4er Kern."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Schreiben von %s"
+msgid "Selected All"
+msgstr "Alle ausw盲hlen"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Ich kann 鈥/etc/sysconfig/bootsplash鈥 nicht anlegen."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Ich kann die LILO Nachricht nicht finden."
+msgid "Webmin Service"
+msgstr "Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiere 鈥%s鈥 nach 鈥%s鈥"
+msgid "device"
+msgstr "Ger盲t"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Anlegen einer Sicherheitskopie von 鈥%s鈥 unter 鈥%s.old鈥."
+msgid "All"
+msgstr "Alle"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Ein neues Thema erzeugen"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Bildschirm-Thema\n"
-"f眉r die Konsole"
+msgid "Greece"
+msgstr "Griechenland"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Themen installieren"
+msgid "An error occurred"
+msgstr "Es ist ein Fehler aufgetreten"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB Modus"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Dieses Paket muss aktualisiert werden.\n"
+"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot Modus"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamilisch (Schreibmaschine)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Datei/B_eenden"
+msgid "Printer manufacturer, model, driver"
+msgstr "Druckerproduzent, Modell, Treiber"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Datei"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"In Laufwerk %s liegt kein Medum oder es ist schreibgesch眉tzt.\n"
+"Bitte legen Sie eins ein."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Das Verzeichnis 鈥%s鈥 enth盲lt bereits Daten\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Kein Browser installiert! Bitte installieren Sie einen."
+msgid "Printer on NetWare server"
+msgstr "Drucker an NetWare Server"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Geben Sie die RAM Gr枚脽e in MB an"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Paket nicht installiert"
+msgid "Real name"
+msgstr "Benutzername"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Nicht installiert"
+msgid "done"
+msgstr "Fertig"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Eingenst盲ndige Werkzeuge"
+msgid "Please uncheck or remove it on next time."
+msgstr ""
+"Bitte entfernen Sie die Markierung oder l枚schen Sie sie das n盲chste Mal."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Report"
+msgid "Higher"
+msgstr "H枚her"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Zu formatierende Partitionen ausw盲hlen"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Ausgabe:"
+msgid "Can't find %s on %s"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Japanese 106 keys"
+msgstr "Japan (106 Tasten)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paket:"
+msgid "This will take a few minutes."
+msgstr "Das dauert einige Minuten"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Anwendung:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Konfigurationsassistenten"
+msgid "Use scanners on remote computers"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Markierte Regel entfernen"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Drucker an CUPS-Server auf der Gegenseite"
+
+#: ../../any.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Windows Migrationswerkzeug"
+msgid "Insert a floppy in %s"
+msgstr ""
+"Legen Sie eine Diskette, die keine relevanten Daten mehr enth盲lt in 鈥%s鈥 ein."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Maldives"
+msgstr "Malediven"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Software-Verwaltung"
+msgid "compact"
+msgstr "Kompakt"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Fernsteuerung"
+msgid "1 minute"
+msgstr "1 Minute"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "on channel %d id %d\n"
+msgstr "auf Kanal %d ID %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid ", multi-function device"
+msgstr ", Multifunktionsger盲t"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Sie haben keine FAT Partition, deren Gr枚脽e ich anpassen kann\n"
+"(m枚glicherweise haben Sie auch einfach nur nichtmehr gen眉gend\n"
+"freien Speicher)."
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Synchronisationsprogramm"
+msgid "Up"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "First Time Assistent"
+msgid "Firewall"
+msgstr "Firewall"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrollzentrum"
+msgid "Area:"
+msgstr "Region:"
-#: ../../standalone/drakbug:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake BugReport Werkzeug"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA-Controller"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parameter"
+msgid "Printer Server"
+msgstr "Drucker-Server"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
+msgid "Disconnection from the Internet complete."
+msgstr "Verbindungstrennung erfolgt."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
+msgid "Custom configuration"
+msgstr "Angepasste Konfiguration"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Netzwerkkarte"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid "Saint Pierre and Miquelon"
+msgstr "St. Pierre und Miquelon"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Wiederherstellungsprobleme:\n"
+"\n"
+"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
+"kontrollieren, bevor sie wiederhergestellt werden.\n"
+"Da vor der Wiederherstellung alle Dateien im \n"
+"Zielverzeichnis von DrakBackup gel枚scht werden, \n"
+"gehen alle darin entghaltenen Daten verloren! \n"
+"Seien Sie daher vorsichtig und 盲ndern Sie die Sicherungskopien \n"
+"nicht manuell.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid "saving Bootsplash theme..."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Internetverbindung eingerichtet.\n"
-"Sie k枚nnen dies tun, indem Sie die Schaltfl盲che \n"
-"鈥濳onfigurieren鈥 bet盲tigen."
+msgid "Do you have another one?"
+msgstr "Verf眉gen Sie 眉ber weitere?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
-"Starten Sie den Konfigurationsassistenten im Hauptfenster."
+msgid ", printing to %s"
+msgstr ", drucken auf %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Sie m眉ssen einen Rechnernamen oder eine IP eingeben.\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "activate now"
-msgstr "Jetzt aktivieren"
+msgid "Toggle to normal mode"
+msgstr "In den Normal-Modus wechseln"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "Jetzt deaktivieren"
+msgid "Generic"
+msgstr "Generisch"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP Klient"
+msgid "Cylinder %d to %d\n"
+msgstr "Zylinder %d bis %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
+msgid "New profile..."
+msgstr "Neues Profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
+msgid "Which disk do you want to move it to?"
+msgstr "Zu welcher Platte wollen Sie wechseln?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "Display logo on Console"
+msgstr "Logo auf Konsole anzeigen"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN Konfiguration"
+msgid "Windows Domain"
+msgstr "Windows Dom盲ne"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN Konfiguration"
+msgid "Interface %s (on network %s)"
+msgstr "Schnittstelle %s (an Netzwerk %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie k枚nnen dies tun, indem Sie die Schaltfl盲che \n"
-"鈥濳onfigurieren鈥 bet盲tigen."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Verbinden ..."
+msgid "Wallis and Futuna"
+msgstr "Wallis und Futuna"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "鈥/etc/dhcpd.conf鈥 muss erst angelegt werden!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not connected"
-msgstr "Nicht Verbunden"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connected"
-msgstr "Verbunden"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Ich konnte keine Scanner direkt an Ihrem Rechner finden.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
+"Es existieren leider keine\n"
+"weiteren Informationen zu\n"
+"diesem Dienst."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Schnittstelle:"
+msgid "Build Single NIC -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Ist dies richtig?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Anwenden"
+msgid "Marshall Islands"
+msgstr "Marshall Inseln"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Hier starten Sie den Assistenten ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Assistent..."
+msgid "Root password"
+msgstr "Root Passwort"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Build All Kernels -->"
+msgstr "Alle Kerne erstellen -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Typ:"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internetzugang"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Sie haben keine Auslagerungspartition\n"
+"\n"
+"Wollen Sie trotzdem fortfahren?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Rechnername: "
+msgid "Server IP missing!"
+msgstr "Die Server-IP fehlt!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Status"
+msgid "Enable ACPI"
+msgstr "ACPI aktivieren"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Treiber"
+msgid "Graphical Environment"
+msgstr "Grafische Arbeitsoberfl盲che"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokoll"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Schnittstelle"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Internet-Zugang konfigurieren"
+msgid "Do nothing"
+msgstr "Tu nichts"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Bitte Warten"
+msgid "Delete Client"
+msgstr "Client l枚schen"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
+msgid "Filesystem type: "
+msgstr "Dateisystemtyp: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Neues Profil..."
+msgid "Starting network..."
+msgstr "Netzwerk starten ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Zu l枚schendes Profil: "
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Profil l枚schen..."
+msgid "/_Fields description"
+msgstr "/_Felderbeschreibung"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk Konfiguration (%d Karten)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimieren Sie Ihre Sicherheit"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Help"
+msgstr "Hilfe"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Ihre eigene Telefonnummer"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Wieviel Platz ben枚tigen sie noch f眉r Windows auf"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Ich kann 鈥瀖kbootdisk鈥 nicht richtig beenden: \n"
-" %s \n"
-" %s"
+"Die Testseite(n) wurden an den Drucker gesandt.\n"
+"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ich kann nicht forken: %s"
+msgid "Username required"
+msgstr "Benutzerkennzeichen n枚tig"
-#: ../../standalone/drakfloppy:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"In Laufwerk %s liegt kein Medum oder es ist schreibgesch眉tzt.\n"
-"Bitte legen Sie eins ein."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Stellen Sie sicher, dass ein Medium in Laufwerk %s liegt."
+"鈥濪rakX鈥 sucht aufgrund Ihrer Sprachauswahl das f眉r Sie passende\n"
+"Tastaturlayout aus. M枚glicherweise haben Sie jedoch eine Tastatur, die\n"
+"nicht dieser Einstellung entspricht: wenn Sie beispielsweise in der Schweiz\n"
+"eine deutsche Tastatur verwenden wollen oder wenn Sie in Qu茅bec (dem\n"
+"franz枚sischsprachigen Teil Kanadas) eine franz枚sischsprachige Tastatur\n"
+"besitzen. W盲hlen Sie einfach ein passendes Layout aus der Liste.\n"
+"\n"
+"Sollten Sie eine andere als die zur gew盲hlten Sprache geh枚rende Tastatur\n"
+"verwenden wollen, w盲hlen Sie die Schaltfl盲che 鈥%s鈥. Sie erhalten dann eine\n"
+"Liste aller unterst眉tzten Tastaturen.\n"
+"\n"
+"Sollten Sie sich f眉r ein Tastaturlayout einer nicht lateinischen Sprache\n"
+"entschieden haben, werden Sie im n盲chsten Schritt gefragt, mit welcher\n"
+"Tastenkombination Sie zwischen dem von Ihnen gew盲hlten und dem lateinischen\n"
+"Layout umschalten wollen."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr " Diskette erstellen "
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Ausgabe"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Modul entfernen"
+msgid "mkinitrd optional arguments"
+msgstr "Optionale Parameter f眉r 鈥瀖kinitrd鈥"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Modul hinzuf眉gen"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr " SCSI Module weglassen "
+msgid "Protocol for the rest of the world"
+msgstr "Protokoll f眉r den Rest der Welt"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr " falls N枚tig "
+msgid "Print test pages"
+msgstr "Testseite(n) drucken"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr " RAID-Module weglassen "
+msgid "64 MB or more"
+msgstr "64 MB oder mehr"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr " mit Gewalt "
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Bitte w盲hlen Sie, welche Testseiten Sie drucken wollen.\n"
+"\n"
+"Bemerkung: Der Druck der Foto-Testseite dauert h盲ufig extrem lange. Bei "
+"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
+"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
+"auszudrucken."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "Optionale Parameter f眉r 鈥瀖kinitrd鈥"
+msgid "Please select the device where your %s is attached"
+msgstr "Bitte w盲hlen Sie den Ger盲tenamen, an dem Ihr 鈥%s鈥 h盲ngt."
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Experten Bereich"
+msgid "Not formatted\n"
+msgstr "Nicht formatiert\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "Kernversion"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr " Standard "
+msgid "PXE Server Configuration"
+msgstr "Konfiguration des PXE-Servers"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Allgemein"
+msgid "Backup the system files before:"
+msgstr "Systemdateien sichern vor:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Boot-Disketten Erstellung"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Das ist die Standard-Sicherheitsebene f眉r Rechner, mit Internetzugang \n"
+"als Klient."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "DrakFloppy"
+msgid "First floppy drive"
+msgstr "erste Disketten-Laufwerk"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr " Gr枚脽e "
+msgid "/File/_Quit"
+msgstr "/Datei/B_eenden"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr " Modulname "
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Nach dem Entfernen"
+msgid "Choose the new size"
+msgstr "W盲hlen Sie die neue Gr枚脽e"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
+msgid "Media class"
+msgstr "Medienklasse"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Vortests"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Der %s wird nicht von dieser Version von ScannerDrake unterst眉zt."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Nach der Installation"
+msgid "Faroe Islands"
+msgstr "Far枚ische Inseln"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Installiere und konvertiere Fonts"
+msgid "Restart XFS"
+msgstr "Neustart des X-FontServers"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Schriften auf Ihren Rechner kopieren"
+msgid "Add host/network"
+msgstr "Hinzuf眉gen eines Rechners/Netzwerks"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Liste entfernen"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Alle ausw盲hlen"
+msgid "Please enter the directory to save to:"
+msgstr "Bitte geben Sie das Archivverzeichnis an:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Markierung l枚schen"
+msgid "Model name"
+msgstr "Modellname"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "Hier, falls nicht."
+msgid "Albania"
+msgstr "Albanien"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "Klicken Sie hier, wenn Sie sicher sind."
+msgid "No CDR/DVDR in drive!"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Liste installieren"
+msgid "British Indian Ocean Territory"
+msgstr "Britisches Territorium im Indischen Ozean"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"W盲hlen Sie eine Schriftdatei bzw. ein Verzeichnis und bet盲tigen Sie "
-"鈥濰inzuf眉gen鈥"
+msgid "Normal Mode"
+msgstr "Normaler Modus"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
-"in Ihr System einbinden wollen, zu verwenden.\n"
+"Stellen Sie sicher, dass der Cron-D盲mon als Dienst aktiviert ist.\n"
"\n"
-"- Sie k枚nnen die Schriften auf normalem Weg einbinden. In seltenen F盲llen \n"
-"k枚nnen defekte Schriften den X-Server lahmlegen."
+"Beachten Sie, dass zur Zeit alle \"Netzmedien\" auch die Festplatte "
+"verwenden."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Generische Drucker"
+msgid "Printer connection type"
+msgstr "Art der Druckeranbindung"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Sie haben keine Netzwerkkarte!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Netzwerk %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "W盲hlen Sie die Programme, die die Schriften verwenden sollen:"
+msgid "Option %s out of range!"
+msgstr "Der Parameter %s ist yu gro脽 oder zu klein!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Connect %s"
+msgstr "Verbinde %s"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+msgid "Restarting CUPS..."
+msgstr "Neustart des X-FontServers"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "脺ber"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Drucken/Scannen/Fotokarten mit 鈥%s鈥"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Font List"
-msgstr "Font-Liste"
+msgid "Duplicate mount point %s"
+msgstr "Den Einh盲ngpunkt %s kopieren"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Erweiterte Einstellungen"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Schiften deinstallieren"
+msgid "Connection Configuration"
+msgstr "Verbindungskonfiguration"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Windows-Schriften verwenden"
+msgid "Unknown|Generic"
+msgstr "Unbekannt|Generisch"
-#: ../../standalone/drakfont:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Schriften einbinden"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
+"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
+"entdeckt und beseitigt wurden oder da in Paketen Sicherheitsl眉cken entdeckt\n"
+"wurden, f眉r die bereits L枚sungen existieren. Um von diesen aktualisierten\n"
+"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
+"Internet nachzuladen. Bet盲tigen Sie die Schaltfl盲che 鈥%s鈥, wenn Sie einen\n"
+"Internetzugang haben, um die Pakete zu installieren, andernfalls bet盲tigen\n"
+"Sie die Schaltfl盲che 鈥%s鈥. Sie k枚nnen diese Pakete nat眉rlich auch jederzeit\n"
+"nach der Installation noch installieren.\n"
+"\n"
+"Bet盲tigen der Schaltfl盲che 鈥%s鈥 zeigt Ihnen eine Liste von Servern, von\n"
+"denen Sie die Aktualisierungen herunterladen k枚nnen. W盲hlen Sie einen in\n"
+"Ihrer N盲he. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
+"die Auswahl und best盲tigen Sie diese durch Bet盲tigen von 鈥%s鈥. Die Pakete\n"
+"werden nun angefordert und installiert. Sollten Sie das nicht w眉nschen,\n"
+"bet盲tigen Sie einfach die Schaltfl盲che 鈥%s鈥."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr "Fertig"
+msgid "Quit"
+msgstr "Verlassen"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs Neustart"
+msgid "Myanmar"
+msgstr "Burma"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Schriftdateien l枚schen"
+msgid "Auto allocate"
+msgstr "Automatisches Erstellen"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Neustart des X-FontServers"
+msgid "Check bad blocks?"
+msgstr "Soll ich nach defekten Bl枚cken suchen?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Tempor盲re Dateien l枚schen"
+msgid "Other MultiMedia devices"
+msgstr "Andere Multimedia Ger盲te"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
-msgstr "Erzeuge 鈥瀟ype1inst鈥"
+msgid "No remote machines"
+msgstr "Keine entfernten Maschinen"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm-Schriftkonvertierung"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Willkommen zum Druckerassistenten\n"
+"\n"
+"Dieser Assistent m枚chte Ihnen helfen, Ihre(n) lokalen Drucker zu "
+"konfigurieren.\n"
+"\n"
+"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
+"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind.\n"
+"\n"
+"Bet盲tigen Sie die Schaltfl盲che 鈥濿eiter鈥, wenn Sie soweit sind, bzw. "
+"鈥濧bbruch鈥, wenn Sie keine Drucker konfigurieren wollen."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf-Schriftkonvertierung"
+msgid "Authentication NIS"
+msgstr "NIS Authentifizierung"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscriptreferenz"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Die Option 鈥濭ebrauch der Kommandozeilen-Parameter einschr盲nken鈥 ist ohne \n"
+"Angabe eines Passworts wirkungslos"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Konvertieren der Schriften"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Teilen der Internetverbindung momentan eingeschaltet."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr "TrueType Installation beendet"
+msgid "Card IO_0"
+msgstr "Karten IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
+msgid "United Arab Emirates"
+msgstr "Vereinigte arabische Emirate"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation von TrueType Schriften"
+msgid "Card IO_1"
+msgstr "Karten IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kopiere Schriften"
+msgid "Thailand"
+msgstr "Thailand"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Suche installierter Schriften"
+msgid "Routers:"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "Konnte keine Schriften finden.\n"
+msgid "Kazakhstan"
+msgstr "Kasachstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Neuwahl korrekter Schriften"
+msgid "Display all available remote CUPS printers"
+msgstr "Anzeigen aller entfernten CUPS-Drucker"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "Ich konnte keine Schriften in Ihren eingeh盲ngten Partitionen finden"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installation %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "Keine Schriften gefunden"
+msgid "Thai keyboard"
+msgstr "Thail盲ndisch"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "Alle Schriften analysieren"
+msgid "Dialup options"
+msgstr "Einwahl Parameter"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Auswahl installierter Schriften zur眉cksetzen"
+msgid "Bouvet Island"
+msgstr "Bouvet-Insel"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Suche installierte Schriften"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Willkommen zu DrakGW -\n"
-"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
-"\n"
-"%s\n"
+"Bitte wechseln Sie die CD!\n"
"\n"
-"W盲hlen Sie 鈥濳onfigurieren鈥 wenn Sie den Assistenten starten wollen."
+"Bitte legen Sie die CD-ROM 鈥%s鈥 in Ihr Laufwerk,\n"
+"dann dr眉cken Sie OK.\n"
+"Falls Sie sie nicht vorliegen haben, dr眉cken Sie Abbruch."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Teilen der Internetverbindung - Konfiguration"
+msgid "Polish"
+msgstr "Polen"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
+msgid "\t-Network by webdav.\n"
+msgstr "\t- Netzwerk per webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
+"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
+"HardDrake, bevor Sie weiter machen."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie k枚nnen Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
-"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
-"teilen."
+msgid "Netmask"
+msgstr "Netzmaske"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
+msgid "No hard drives found"
+msgstr "Keine Festplatten gefunden"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Serie"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfigurieren ..."
+msgid "2 buttons"
+msgstr "2 Tasten"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein m枚glicher LAN-Adressen Konflikt in der Konfiguration\n"
-"von %s vor!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Das lokale Netzwerk endet nicht auf 鈥.0鈥 - bereinige."
+msgid "Label"
+msgstr "Identifikator"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Neu konfigurieren des Ger盲ts und des DHCP-Servers"
+msgid "Save on floppy"
+msgstr "Auf Diskette speichern"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maximale IP-Verleihdauer (in Sekunden)"
+msgid "Printer auto-detection"
+msgstr "Selbsterkennung von Druckern"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Standard-IP-Verleihdauer (in Sekunden)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Welche der folgenden ist Ihre ISDN-Karte?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS ist ein gel盲ufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
+"durch verschiedene Rechner gemeinsam nutzen zu k枚nnen. \n"
+"Dieser Dienst stellt Ihnen einen solchen Server zur Verf眉gung. \n"
+"Konfiguriert wird er in der Datei 鈥/etc/exports鈥."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Der interne Dom盲nen-Name"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Anmerkung: Ein Eintrag wurde ge盲ndert:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "Die IP des DNS-Servers"
+msgid "Number of capture buffers:"
+msgstr "Anzahl der Aufnahmepuffer:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Diese) DHCP-Server IP"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Ihre Wahl? (0/1, Standard 鈥%s鈥) "
-#: ../../standalone/drakgw:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Lokale Netzwerkadresse"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
-"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
-"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
-"weder neukonfigurieren, noch Ihre DHCP-Konfiguration 盲ndern.\n"
+"Alle Partitionen, die gerade neu erzeugt wurden, m眉ssen formatiert werden\n"
+"(d.h. es muss ein Dateisystem auf der Partition erstellt werden), bevor sie\n"
+"verwendet werden k枚nnen.\n"
"\n"
-"Ihr standardm盲脽iger DNS Eintrag ist der Caching Nameserver Ihrer Firewall. "
-"Sie k枚nnen diesen etwa durch den DNS Server Ihres Internetanbieters "
-"ersetzen.\n"
+"Sie erhalten hier auch die M枚glichkeit bereits existierende Partitionen neu\n"
+"zu formatieren, um die darauf vorhandenen Daten zu l枚schen. Markieren Sie\n"
+"diese einfach ebenfalls in der Liste.\n"
"\n"
-"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
-"Server f眉r Sie aufsetzen.\n"
+"Es sei angemerkt, dass nicht alle Partitionen neu formatiert werden m眉ssen.\n"
+"Sie sollten normalerweise nur die Partitionen neu formatieren, die\n"
+"Systemdateien, jedoch keine Privatdaten enthalten (etwa 鈥/鈥, 鈥/usr鈥 oder\n"
+"鈥/var鈥). Partitionen wie etwa 鈥/home鈥 sollten Sie normalerweise nicht neu\n"
+"formatieren.\n"
+"\n"
+"Seien Sie sorgf盲ltig bei der Auswahl der Partitionen. Nach dem Formatieren\n"
+"sind alle zuvor darauf existierenden Daten unwiederbringlich verloren.\n"
+"\n"
+"Wenn Sie alle Einstellungen vorgenommen haben, bet盲tigen Sie die\n"
+"Schaltfl盲che 鈥%s鈥, um mit dem Formatieren der Partitionen zu beginnen.\n"
"\n"
+"Bet盲tigen Sie 鈥%s鈥, wenn Sie eine andere Partition f眉r Ihr neues Mandrake\n"
+"Linux vorgesehen haben.\n"
+"\n"
+"Bet盲tigen Sie die Schaltfl盲che 鈥%s鈥, falls Sie Partitionen auf defekte\n"
+"Bl枚cke untersuchen wollen."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Frankreich"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tschechien (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Hardwareerkennung l盲uft"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "xinetd"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Zusammenfassung"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Aktuelle Konfiguration von 鈥%s鈥:\n"
-"\n"
-"Netzwerk: %s\n"
-"IP-Adresse: %s\n"
-"IP-Eigenschaften: %s\n"
-"Treiber: %s"
+" (Parallele Anschl眉sse: /dev/lp0, /dev/lp1, ..., 盲quivalent zu LPT1:, "
+"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweiter USB Drucker: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration"
+msgid "Next"
+msgstr "Weiter"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr ""
+"Sie k枚nnen den Betriebssystemstarter\n"
+"nicht auf einer %s Partition installieren!\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatische Rekonfiguration"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(BOOTP/DHCP/ZEROCONF)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Warnung, das Netzwerkger盲t 鈥%s鈥 ist bereits konfiguriert.\n"
"\n"
-"Wollen Sie eine automatische Neukonfiguration?\n"
+"Willkommen.\n"
"\n"
-"Sie k枚nnen auch eine manuelle Einrichtung vornehmen - daf眉r sollten Sie "
-"jedoch wissen, wie das funktioniert."
+"Die Parameter der Autoinstallation sind in den Abschnitten rechts verf眉gbar."
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Ihr Netzwerk ist bereits konfiguriert"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Bitte w盲hlen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
+"Das Paket 鈥欼mageMagick鈥 wird zur Beendigung der Konfiguration ben枚tigt.\n"
+"W盲hlen Sie 鈥濷k鈥, um 鈥欼mageMagick鈥 zu installieren oder 鈥濧bbruch鈥 zum Beenden."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litauen (QWERTY - 鈥瀗umber row鈥)"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Sie haben nur eine konfiguriertes Netzwerkger盲t an Ihrem Rechner:\n"
+"Folgende Pakete werden entfernt, um das Aktualisieren Ihres Rechners zu "
+"erm枚glichen: %s\n"
"\n"
-"%s\n"
"\n"
-"Ich setze ihr lokales Netz damit auf."
+"Wollen Sie diese Pakete wirklich entfernen?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Netzwerkkarte"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS Domain"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
+"\n"
+"- Benutzerdateien:\n"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
+msgid "Antarctica"
+msgstr "Antarktis"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
+msgid "Mount options"
+msgstr "Einh盲ng-Optionen"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "xinetd"
+msgid "Jamaica"
+msgstr "Jamaika"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Weist Roh-Ger盲ten ein blockorientiertes Ger盲t (etwa eine\n"
+"Festplattenpartition) zu. Dies wird f眉r Anwendungen wie\n"
+"etwa ORACLE Datenbankem oder DVD Spielern ben枚tigt"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
-"mit DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
-"Anmerkung: Sie ben枚tigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen k枚nnen."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
+msgid "Please wait, preparing installation..."
+msgstr "Bitte warten, bereite Installation vor"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
+msgid "Czech (QWERTZ)"
+msgstr "Tschechien (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Server aktivieren ..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Netzwerkkarten-ID 眉berwachen (sinnvoll f眉r Laptops)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "Verwerfen"
+msgid "The port number should be an integer!"
+msgstr "Die Port Nummer muss eine ganze Zahl sein!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "neu konfigurieren"
+msgid "You must choose an image file first!"
+msgstr "Sie m眉ssen zuerst eine Abbild-Datei ausw盲hlen!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "aktivieren"
+msgid "Restore from Hard Disk."
+msgstr "Von Festplatte wiederherstellen"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die Einrichtung einer gemeinsamen Internet-Verbindung wurde bereits "
-"durchgef眉hrt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
+msgid "Add to LVM"
+msgstr "Zum LVM hinzuf眉gen"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
+msgid "DNS server"
+msgstr "DNS-Server"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad und Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Server deaktivieren ..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD und LPRng unterst眉keine IPP Drucker.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "deaktivieren"
+msgid "simple"
+msgstr "Einfach"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
+msgid "Clear all"
+msgstr "Alles l枚schen"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Teilen der Internetverbindung momentan eingeschaltet."
+msgid "No test pages"
+msgstr "Keine Testseiten"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falkland Inseln"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
+msgid "Unknown model"
+msgstr "Unbekanntes Modell"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Authentifizierung"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "group :"
-msgstr "Gruppe :"
+msgid "Backup Now"
+msgstr "Jetzt sichern"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "user :"
-msgstr "Benutzer :"
+msgid "/_File"
+msgstr "/_Datei"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Pfad-Auswahl"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Drucker f眉r StarOffice/OpenOffice.org/GIMP entfernen"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Startet Paketfilterung f眉r Linux 2.2er Kerne, um Ihren Rechner \n"
+"durch eine Firewall vor Angriffen aus dem Netz zu sch眉tzen."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Gruppen-ID zur Ausf眉hrung benutzen"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamilisch (TSCII Layout)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Eigent眉mer-ID zur Ausf眉hrung benutzen"
+msgid "Mayotte"
+msgstr "Mayotte (Frankreich)"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Erstellen einer Auto-Installationsdiskette"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Searching for scanners ..."
+msgstr "Suche nach neuen Scannern ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Partitioning"
+msgstr "Partitionierung"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Russia"
+msgstr "Russland"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Property"
-msgstr "Eigenschaft"
+msgid "ethernet card(s) detected"
+msgstr "Netzwerkkarte(n) gefunden"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Permissions"
-msgstr "Berechtigungen"
+msgid "Syslog"
+msgstr "SysLog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current user"
-msgstr "Aktueller Benutzer"
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "browse"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+# ../../diskdrak1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr ""
+msgid "Not enough free space for auto-allocating"
+msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "edit"
-msgstr ""
+msgid "Set root password"
+msgstr "Root-Passwort setzen"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Markierte Regel entfernen"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Es existiert kein freier Treiber f眉r Ihre Soundkarte (%s), aber es gibt "
+"einen propriet盲ren Treiber unter \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "delete"
-msgstr "l枚schen"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Durch Ver盲nderung der Partitionsgr枚脽e von %s, gehen s盲mtliche Daten darauf "
+"verloren"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Neue Regel am Ende hinzuf眉gen"
+msgid "Internet connection configuration"
+msgstr "Konfiguration der Internetverbindung"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "add a rule"
-msgstr "eine Regel hinzuf眉gen"
+msgid "Scanning for TV channels"
+msgstr "Sendersuche..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Down"
-msgstr "Runter"
+msgid "/_About..."
+msgstr "/_脺ber ..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Markierte Regel eine Ebene h枚her verschieben"
+msgid "Bengali"
+msgstr "Bangladesh"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Preference: "
+msgstr "Einstellung: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Wizard..."
+msgstr "Assistent..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Services: %d activated for %d registered"
+msgstr "Dienste: %d aktiviert von %d registrierten."
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "permissions"
-msgstr "Berechtigungen"
+msgid "Create a bootdisk"
+msgstr "Startdiskette erstellen"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "group"
-msgstr "Gruppe"
+msgid "Solomon Islands"
+msgstr "Solomon-Inseln"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "user"
-msgstr "Benutzer"
+msgid "(module %s)"
+msgstr "(Modul %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Workgroup"
+msgstr "Arbeitsgruppe"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ort der auto_install.cfg Datei"
+msgid "Printer host name or IP"
+msgstr "Rechnername/IP des Druckers"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
+"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No image found"
-msgstr "Kein Abbild gefunden"
+msgid "Show current interface configuration"
+msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "Installation image directory"
-msgstr "Verzeichnis des Installationsabbildes"
+msgid "Development"
+msgstr "Entwicklungsplattform"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Done"
+msgstr "Fertig"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Web Server"
+msgstr "Webserver"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP start ip"
+msgid "\tDo not include System Files\n"
+msgstr "\tKeine Systemdateien\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Chile"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
+"Der Lexmark Tintenstrahl-Druckertriber unterst眉tzt nur lokale Drucker, keine "
+"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schlie脽en "
+"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
+"ein, an den er angeschlossen ist."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
+"Ihr Multifunktionsger盲t wurde automatisch auch zum Scannen eingerichtet. Sie "
+"k枚nnen nun mit dem Befehl 鈥瀞canimage鈥 (鈥瀞canimage -d hp:%s鈥 um den Scanner "
+"auszuw盲hlen, falls Sie mehrere angeschlossen haben), eingegeben in der "
+"Kommandozeile, scannen. Wenn Sie eine grafisches Werkzeug verwenden wollen: "
+"鈥瀤scanimage鈥 bzw. 鈥瀤sane鈥. Sie k枚nnen auch den GIMP verwenden. W盲hlen Sie "
+"einfach im Men眉 鈥濪atei/Holen鈥 den entsprechenden Eintrag. Sie k枚nnen sich "
+"auch mittels 鈥瀖an scanimage鈥 bzw 鈥瀖an sane-hp鈥 in der Kommandozeile weitere "
+"Informationen ausgeben lassen.\n"
+"\n"
+"Verwenden Sie f眉r dieses Ger盲t nicht 鈥濻cannerDrake鈥!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Schnittstelle %s (an Netzwerk %s)"
+msgid "(already added %s)"
+msgstr "(%s wurde bereits hinzugef眉gt)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Bitte w盲hlen Sie, welches Netzwerkger盲t f眉r den DHCP-Server verwendet wird."
+msgid ", using command %s"
+msgstr ", mittels Kommando 鈥%s鈥"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt und Umschalttaste gleichzeitig"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"Sie sind dabei, auf Ihrem Rechner einen PXE-Server als DHCP-Server sowie "
-"einen TFTP-Server einzurichten. Damit erm枚glichen Sie es anderen Rechnern "
-"Ihres Netzwerks eine Installation von diesem Rechner aus vorzunehmen.\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung mit "
-"DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
-"Anmerkung: Sie ben枚tigen eine Netzwerkkarte, mit deren Hilfe Sie ein lokales "
-"Netz (LAN) aufsetzen k枚nnen."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfiguration des Installations-Servers"
+msgid "Add/Del Users"
+msgstr "Benutzer hinzuf眉gen/l枚schen"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfiguration des PXE-Servers"
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Bitte warten, Sicherheitsoptionen werden eingestellt..."
+msgid "weekly"
+msgstr "w枚chendlich"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Bitte warten, Sicherheitsebene wird eingestellt..."
+msgid "Settings"
+msgstr "Einstellungen"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
-msgstr ""
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Die eingegebene Rechner/Netzwerk Information ist nicht korrekt.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "System Options"
-msgstr "Systemoptionen"
+msgid "Here is the full list of available countries"
+msgstr "Hier die komplette Liste aller Staaten"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Netzwerkoptionen"
+msgid "Alternative test page (A4)"
+msgstr "Alternative Testseite (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Falls Sie alle aufgef眉hrten CDs haben, w盲hlen Sie 鈥濷K鈥, \n"
+"falls Sie keine der aufgef眉hrten CDs haben, w盲hlen Sie 鈥濧bbruch鈥,\n"
+"falls nur einige der aufgef眉hrten CDs fehlen, entfernen Sie die \n"
+"entsprechende Markierung und w盲hlen Sie dann 鈥濷K鈥."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Sicherheitsadministrator (Kennzeichen oder E-Mail):"
+msgid "Wait please"
+msgstr "Bitte Warten"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Sicherheitswarnungen:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Sicherheitsebene:"
+msgid "Backup user files"
+msgstr "Benutzerdateien sichern"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr " (Voreinstellung: %s)"
+msgid "New"
+msgstr "Neu"
-#: ../../standalone/draksec:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"Sie k枚nnen nun das 禄root芦 Passwort f眉r Ihr Mandrake Linux System eingeben.\n"
+"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass Sie\n"
+"es korrekt eingegeben haben.\n"
"\n"
+"禄root芦 ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
+"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
+"盲ndern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: 禄root芦 darf\n"
+"alles! W盲hlen Sie deshalb das Passwort sehr sorgf盲ltig aus! Unberechtigter\n"
+"Zugang zu diesem Kennzeichen ist extrem gef盲hrlich f眉r die Integrit盲t Ihres\n"
+"Systems und der darauf enthaltenen Daten. Daher m眉ssen Sie auch ein\n"
+"Passwort ausw盲hlen, was nicht leicht zu erraten ist; 鈥濪rakX鈥 teilt Ihnen\n"
+"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch m枚glich ist,\n"
+"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
+"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
+"Betriebssysteme vor Fehlern sicher sind. 禄root芦 hat keine Beschr盲nkungen.\n"
+"Er k枚nnte beispielsweise unbeabsichtigt erweise alle Daten auf allen\n"
+"Partitionen l枚schen, weil er unvorsichtigerweise auf die Partitionen selber\n"
+"zugegriffen hat!\n"
"\n"
+"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
+"mindestens 8 Zeichen lang. Es sollte niemals irgendwo aufgeschrieben\n"
+"werden.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
+"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
+"es sich ohne gro脽en Aufwand merken k枚nnen.\n"
"\n"
+"Sie m眉ssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
+"Versuch k枚nnte sonst zu einem Problem werden, da Sie anschlie脽end das\n"
+"鈥瀎alsche鈥 Passwort bei der Verbindung mit dem System eingeben m眉ssten.\n"
"\n"
-"You can visit our hardware database at:\n"
+"Wenn Sie wollen, dass der Zugang zu diesem Rechner 眉ber einen\n"
+"Authentifizierungsserver verwaltet wird, bet盲tigen Sie die Schaltfl盲che\n"
+"鈥%s鈥.\n"
"\n"
+"Falls in Ihrem Netzwerk LDAP, NIS oder PDC zur Authentifizierung verwendet\n"
+"wird, w盲hlen Sie bitte den entsprechenden Men眉punkt. Falls Sie nicht\n"
+"wissen, welches Protokoll Sie verwenden, fragen Sie Ihren\n"
+"Netzwerkadministrator.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Wenn Sie Probleme haben, sich Passw枚rter zu merken, k枚nnen Sie die Option\n"
+"鈥%s鈥 w盲hlen. Dennoch m眉ssen wir Ihnen von dieser M枚glichkeit abraten.\n"
+"Besonders wenn Sie mit Ihrem Rechner st盲ndig oder auch nur zeitweise mit\n"
+"dem Internet verbunden sind."
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
msgstr ""
+"Nun ist es an der Zeit, die gew眉nschte Sicherheitsebene f眉r Ihr System\n"
+"festzulegen. Als Faustregel sollte hier dienen: Je zug盲nglicher die\n"
+"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
+"h枚her sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
+"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
+"gewisse Befehle/Abl盲ufe durchgef眉hrt werden k枚nnen.\n"
+"\n"
+"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
+"Standardeinstellung bei."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Keine Soundkarte erkannt!"
+msgid "Load from floppy"
+msgstr "Von Diskette laden"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) Vorschau"
+msgid "The following printer was auto-detected. "
+msgstr "Der folgenden Drucker wurde automatisch erkannt."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Vorschau erzeugen ..."
+msgid "Boot Floppy"
+msgstr "Bootdiskette"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Sie m眉ssen zuerst eine Abbild-Datei ausw盲hlen!"
+msgid "Norwegian"
+msgstr "Norwegen"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Farbauswahl f眉r den Fortschrittsbalken"
+msgid "Searching for new scanners ..."
+msgstr "Suche nach neuen Scannern ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
+msgid "Apache World Wide Web Server"
+msgstr "Apache Web-Server"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image file"
-msgstr "Abbild-Datei ausw盲hlen"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Abbild-Datei ausw盲hlen"
+msgid "select path to restore (instead of /)"
+msgstr "Pfad zum Wiederherstellen ausw盲hlen (anstatt /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Bootsplash-Bild konfigurieren"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
+msgid "China"
+msgstr "China"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr ""
+"(Stellen Sie bitte sicher, dass alle Drucker angeschlossen und angeschaltet "
+"sind).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Logo auf Konsole anzeigen"
+msgid "Georgia"
+msgstr "Georgien"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Choose color"
-msgstr "Farbe einstellen"
+msgid "Reading data of installed printers..."
+msgstr "Lese Daten installierter Drucker ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save theme"
-msgstr "Thema abspeichern"
+msgid " Erase Now "
+msgstr " Jetzt l枚schen"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Preview"
-msgstr "Vorschau"
+msgid "server"
+msgstr "Server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the height of the progress bar"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
+"Ja bedeutet, dass der Prozessor einen arithmetischen Koprozessor besitzt."
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Einen Moment ... ich richte die Konfiguration ein"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "SCSI controllers"
+msgstr "SCSI-Controller"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "auf LDP-Server 鈥%s鈥, Drucker 鈥%s鈥"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "Zeroconf Rechnername"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Browse"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Die IP Adresse sollte etwa die Form 鈥192.168.1.42鈥 haben!"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Themenname"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "final resolution"
-msgstr "endg眉ltige Aufl枚sung"
+msgid "Add an item"
+msgstr "Eintrag hinzuf眉gen"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "first step creation"
-msgstr "Erter Schritt Erstellung"
+msgid "The printers on this machine are available to other computers"
+msgstr "Die Drucker dieses Rechners sind f眉r andere Rechner nutzbar"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "I can't find needed image file `%s'."
+msgstr "Ich kann die ben枚tigte Abbild-Datei 鈥%s鈥 nicht finden."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-"Das Paket 鈥欼mageMagick鈥 wird zur Beendigung der Konfiguration ben枚tigt.\n"
-"W盲hlen Sie 鈥濷k鈥, um 鈥欼mageMagick鈥 zu installieren oder 鈥濧bbruch鈥 zum Beenden."
+"Es wurde keine Soundkarte gefunden. Versuchen Sie 鈥瀐arddrake鈥 nach der "
+"Installation."
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
+"Angabe eines ung眉ltigen Ports: 鈥%s鈥.\n"
+"Das Format lautet: 鈥瀙ort/tcp鈥 oder 鈥瀙ort/udp鈥, \n"
+"wobei Port eine Zahl zwischen 1 und 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Keine TV-Karte gefunden!"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Sie k枚nnen nun (unter X-Windows) 鈥瀤awtv鈥 starten.\n"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Bis bald!"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome und Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ist nicht installiert!"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ich kann mich unter 鈥%s鈥 nicht anmelden! Stimmt das Passwort?"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Bei der Suche der TV-Kan盲le trat ein Fehler auf"
+msgid "Azerbaidjani (latin)"
+msgstr "Aserbeidschan (Lateinisches Layout)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Sendersuche..."
+msgid "Package not installed"
+msgstr "Paket nicht installiert"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Sendersuche ..."
+msgid "Become a MandrakeExpert"
+msgstr "Werden Sie ein 鈥濵andrakeExpert鈥"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Area:"
-msgstr "Region:"
+msgid "American Samoa"
+msgstr "Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "TV norm:"
-msgstr "Fernsehnorm:"
+msgid "Protocol"
+msgstr "Protokoll"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Schriften auf Ihren Rechner kopieren"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "HardDrake Hilfe"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "Bogomips"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Mandrake Terminal Server Konfiguration"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Restore all backups"
+msgstr "Alle Sicherungen wiederherstellen"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check open ports."
+msgstr "Auf 鈥濲a鈥 gestellt, werden offene Ports kontrolliert."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Neuseeland"
+msgid "You can't select/unselect this package"
+msgstr "Sie k枚nnen dieses Paket nicht ausw盲hlen/es aus der Auswahl entfernen."
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Frankreich (SECAM)"
+msgid "Warning"
+msgstr "Warnung"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "East Europe"
-msgstr "Osteuropa"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Sonstige Dateien:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Westeuropa"
+msgid "Remote host name"
+msgstr "Name des entfernten Rechners"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "China (broadcast)"
-msgstr "China (terrestrisch)"
+msgid "deactivate now"
+msgstr "Jetzt deaktivieren"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (Kabel)"
+msgid "access to X programs"
+msgstr "Zugriff auf X-Programme"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (terrestrisch)"
+msgid "Computing the size of the Windows partition"
+msgstr "Berechnung der Gr枚脽e der Windows Partition"
-# ../../standalone/drakxtv_.c:37莽
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (Kabel)"
+msgid "Italy"
+msgstr "Italien"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (Kabel-hrc)"
+msgid "Name of printer"
+msgstr "Druckername"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (Kabel)"
+msgid "disable"
+msgstr "deaktivieren"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (terrestrisch)"
+msgid "error unmounting %s: %s"
+msgstr "Fehler beim Aush盲ngen von %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgid "Do it!"
+msgstr "Ausf眉hren!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "Cayman-Inseln"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "Prim盲r"
+msgid "Select model manually"
+msgstr "Modell ausw盲hlen"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "secondary"
-msgstr "Sekund盲r"
+msgid "Format"
+msgstr "Formatieren"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"Der gebr盲uchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
+"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
+"Wenn Sie nicht wissen was Sie brauchen, w盲hlen Sie 鈥瀙ppoe verwenden鈥"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Unbekannt"
+msgid "Various"
+msgstr "Verschiedene"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "Unbekannt"
+msgid "Zip"
+msgstr "ZIPs"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "鈥%s鈥 ausf眉hren ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "Konfigurationswerkzeug starten"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Markieren Sie die Druckerwarteschlangen, die sie 眉bertragen wollen und "
+"bet盲tigen Sie die Schaltfl盲che 鈥灻渂ertragen鈥."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Modul konfigurieren"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informationen"
+msgid "Albanian"
+msgstr "Albanien"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Gefundene Hardware"
+msgid "Lithuania"
+msgstr "Litauen"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "HardDrake Version "
+msgid "Compact"
+msgstr "Kompakt"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Erkennung l盲uft"
+msgid "Detected model: %s %s"
+msgstr "Gefundendenes Modell: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"HardDrake - das Mandrake Linux Hardware-Konfigurationswerkzeug.\n"
"Version:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "脺ber HardDrake"
+msgid "Local files"
+msgstr "Lokale Dateien"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_脺ber ..."
+msgid "maybe"
+msgstr "eventuell"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Fehler Melden"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
+"Ihre Grafikkarte scheint einen TV-Ausgang zu haben, der mittels Frame-Buffer "
+"angesprochen werden kann.\n"
+"\n"
+"Wenn Sie das w眉nschen, schlie脽en Sie bitte Ihren Fernseher an die "
+"Grafikkarte an, bevor Sie den Rechner neu starten.\n"
+"W盲hlen Sie 鈥濼V-Ausgang鈥 im Betriebssystemstarter.\n"
+"\n"
+"Haben Sie einen solchen Ausgang und wollen Sie ihn verwenden?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "W盲hlen Sie ein Ger盲t!"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Beschreibung der Felder:\n"
+"Sie sind dabei, einen Drucker einzurichten, der 眉ber ein Windows-"
+"Benutzerkonto mit Passwort druckt. Aufgrund eines Fehlers in der Architektur "
+"der Samba-Client-Software wird das Passwort im Klartext in die Kommandozeile "
+"der Samba-Komponente eingef眉gt, welche die zu druckenden Daten auf den "
+"Windows-Server 眉bertr盲gt. So ist es f眉r jeden Benutzer m枚glich, das Passwort "
+"auf dem Bildschirm anzuzeigen, indem er Kommandos wie zum Beispiel 鈥瀙s "
+"auxwww鈥 ausf眉hrt.\n"
+"\n"
+"Wir empfehlen von einer der folgenden Alternativen Gebrauch zu machen (in "
+"allen F盲llen muss sichergestellt werden dass nur Maschinen des lokalen "
+"Netzwerks auf den Windows-Server zugreifen k枚nnen, zum Beispiel mit Hilfe "
+"einer Firewall):\n"
+"\n"
+"Drucken Sie 眉ber ein Benutzerkonto ohne Passwort auf Ihrem Windows-Server, "
+"zum Beispiel 眉ber das 鈥濭UEST鈥-Benutzerkonto oder 眉ber ein speziell zum "
+"Drucken eingerichtetes Benutzerkonto. Entfernen Sie nicht den Passwortschutz "
+"von einem pers枚nlichen Benutzerkonto oder vom Administratorkonto.\n"
+"\n"
+"Richten Sie Ihren Windows-Server so ein, dass der Drucker unter dem LPD-"
+"Protokoll erreichbar ist. Dann richten sie den Drucker auf dieser Maschine "
+"mit dem Verbindungstyp 鈥%s鈥 ein.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "HardDrake Hilfe"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Felderbeschreibung"
+msgid "65 thousand colors (16 bits)"
+msgstr "65.000 Farben (16 Bit)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Hilfe"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Auf Festplatte sichern unter: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Beenden"
+msgid "Size: %d KB\n"
+msgstr "Gr枚脽e: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/_Jazz-Laufwerke automatisch erkennen"
+msgid "Remove fonts on your system"
+msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/_Modems automatisch erkennen"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Warnung, das Netzwerkger盲t 鈥%s鈥 ist bereits konfiguriert.\n"
+"\n"
+"Wollen Sie eine automatische Neukonfiguration?\n"
+"\n"
+"Sie k枚nnen auch eine manuelle Einrichtung vornehmen - daf眉r sollten Sie "
+"jedoch wissen, wie das funktioniert."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/_Drucker automatisch erkennen"
+msgid "Graphical interface at startup"
+msgstr "X zur Startzeit"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Optionen"
+msgid "Please enter the directory to save:"
+msgstr "Bitte geben Sie das Archivverzeichnis an:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "Herstellername des Prozessors"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "Herstellername des Ger盲ts"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nicht gen眉gend Partitionen f眉r RAID Level %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Der Typ des Busses, an dem die Maus angeschlossen ist."
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Die folgenden Drucker sind bereits eingerichtet. F眉hren Sie einen "
+"Doppelklick auf einem aus, um ihn zu 盲ndern, als Standarddrucker zu "
+"verwenden oder Informtionen 眉ber ihn zu erhalten."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+msgid "Connected"
+msgstr "Verbunden"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Modell-Staffelung"
+msgid "USB printer \\#%s"
+msgstr "USB-Drucker \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "die Nummer des Prozessors"
+msgid "Macedonian"
+msgstr "Mazedonien"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "network printer port"
-msgstr "Port des Netzwerkdruckers"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "Herstellername des Ger盲ts"
+msgid "/File/_Save"
+msgstr "/Datei/_Speichern"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name"
-msgstr "Name"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "die Nummer des Prozessors"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Number of buttons"
-msgstr "Anzahl Tasten"
+msgid "No details"
+msgstr "Details"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Offizieller Herstellername der CPU"
+msgid "very nice"
+msgstr "sehr angenehm"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model name"
-msgstr "Modellname"
+msgid "Preview"
+msgstr "Vorschau"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Remote Control"
+msgstr "Fernsteuerung"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model"
-msgstr "Modell"
+msgid "Please select media for backup..."
+msgstr "Bitte w盲hlen Sie ein Sicherungsmedium..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "Festplattenmodell"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 Server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "class of hardware device"
-msgstr "Hardwareklasse"
+msgid "Allow Thin Clients"
+msgstr "Erlaube Thin Clients"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Media class"
-msgstr "Medienklasse"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgien (Kyrillisches Layout)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Optionen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Level"
-msgstr "Ebene"
+msgid "Your printer model"
+msgstr "Ihr Druckermodell"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(WARNUNG! Sie verwenden XFS f眉r Ihre Verzeichnisbaumwurzel.\n"
+"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
+"schl盲 sicher fehl, da XFS einen sehr gro脽en Treiber ben枚tigt)."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Floppy format"
-msgstr "Diskettenformat"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake Terminal Server Konfiguration"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Save"
+msgstr "Speichern"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "The %s is unsupported"
+msgstr "Der Scanner 鈥%s鈥 wird nicht unterst眉tzt"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "L盲dt die Treiber f眉r Ihre USB-Ger盲te."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-"Ja bedeutet, dass der Prozessor einen arithmetischen Koprozessor besitzt."
+msgid "Disk"
+msgstr "Festplatten"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Druckeranschluss URI"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
+"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
+"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
+"GNU/Linux-Gemeinde."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "Das Linux Kernmodul, das Unterst眉tzung f眉r dieses Ger盲t bereitstellt"
+msgid "French Guiana"
+msgstr "Franz枚sisch Guiana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "Modul"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Neuer vom DevFS des Kerns vergebener dynamischer Ger盲tename"
+msgid "add a rule"
+msgstr "eine Regel hinzuf眉gen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Neues DevFS Ger盲t"
+msgid "A command line must be entered!"
+msgstr "Eine Kommandozeile muss eigegeben werden!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "Alter statischer Name im 鈥瀌ev鈥 Paket"
+msgid "Select user manually"
+msgstr "Benutzerkennzeichen ausw盲hlen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Alte Ger盲tedatei"
+msgid "Transfer printer configuration"
+msgstr "Drucker-Einstellung transferieren"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Dieses Feld beschreibt das Ger盲t"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Wollen Sie oben aufgef眉hrte Drucker zum Drucken konfigurieren?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"Die CPU-Frequenz in MHz (Megaherz), sie gibt eine erste N盲herung f眉r die "
-"anzahl Befehle, die der Prozessor pro Sekunde ausf眉hren kann."
+"Damit dies mit einem Windows 2000-Dom盲nen-Controller funktioniert, muss der "
+"Administrator folgendes Ausf眉hren: 鈥濩:\\>net localgroup \"Pre-Windows 2000 "
+"Compatible Access\" everyone /add鈥. Anschlie脽end muss der Server neu "
+"gestartet werden.\n"
+"Damit Sie Ihren Mandrake Linux Rechner zur Windows(TM) Dom盲ne hinzuf眉gen "
+"k枚nnen, ben枚tigen Sie noch Kennzeichen und Passwort eines "
+"Dom盲nenadministrators.\n"
+"Sollte das Netzwerk noch nicht aktiv sein, wird DrakX nach der "
+"Netzwerkkonfiguration versuchen, sich in die Dom盲ne zu integrieren.\n"
+"Sollte dies schief gehen, und die Dom盲nenauthentifizierung funktioniert "
+"nicht, verwenden Sie nach der Instalation von Mandrake Linux folgenden "
+"Befehl: 鈥瀞mbpasswd -j DOM脛NE -U KENNZEICEN%%PASSWORT鈥, wobei 鈥濪OM脛NE鈥 die "
+"Windows(TM) Dom盲ne ist, 鈥濳ENNZEICHEN鈥 und 鈥濸ASSWORT鈥 das Kennzeichen und das "
+"Passwort des Dom盲nenadministrators.\n"
+"Mit 鈥瀢binfo -t鈥 k枚nnen Sie anschlie脽end testetn, ob die Anmeldung "
+"erfolgreich war."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frequenz (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Iformationsebene, die durch den Befehl CPUID erhalten werden kann."
+msgid "Use network connection to backup"
+msgstr "Netzwerkverbindung zur Datensicherung verwenden"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "CPUID Ebene"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
+"installieren wollen. Es gibt tausende von Paketen f眉r Mandrake Linux, und\n"
+"Sie m眉ssen sie nicht alle auswendig kennen.\n"
+"\n"
+"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
+"wiederum enthalten vier Abschnitte:\n"
+"\n"
+" * 鈥%s鈥: Falls Ihr Rechner als Arbeitsplatzrechner verwendet werden soll,\n"
+"markieren Sie eine oder mehrere Gruppen.\n"
+"\n"
+" * 鈥%s鈥: Falls Sie mit Ihrem Rechner programmieren wollen, sollten Sie\n"
+"diese Gruppe markieren.\n"
+"\n"
+" * 鈥%s鈥: Wenn Ihre Maschine ein Server werden soll, k枚nnen Sie hier die\n"
+"wichtigsten Dienste ausw盲hlen, die auf Ihren Rechner installiert werden\n"
+"sollen.\n"
+"\n"
+" * 鈥%s鈥: W盲hlen Sie hier Ihre bevorzugte grafische Arbeitsoberfl盲che. Wenn\n"
+"Sie eine grafische Oberfl盲che verwenden wollen, so m眉ssen Sie hier\n"
+"zumindest eine Gruppe ausw盲hlen.\n"
+"\n"
+"Wenn Sie die Maus 眉ber eine Gruppe bewegen, erhalten Sie einen kurzen\n"
+"erkl盲renden Text 眉ber die Gruppe. Falls Sie bei einer Installation alle\n"
+"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
+"verschiedenen Minimalinstallationen w盲hlen k枚nnen:\n"
+"\n"
+" * 鈥%s鈥 Installiert eine rudiment盲re grafische Oberfl盲che;\n"
+"\n"
+" * 鈥%s鈥 Installiert das Basissystem zuz眉glich grundlegender Werkzeuge\n"
+"inklusive deren Dokumentation. Dies ist die sinnvollste Wahl f眉r eine\n"
+"Serverinstallation.\n"
+"\n"
+" * 鈥%s鈥 Sie erhalten eine komplett 鈥瀗ackte鈥 65MB gro脽e\n"
+"GNU/Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich von\n"
+"selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
+"\n"
+"Wenn Sie die Schaltfl盲che 鈥%s鈥 anw盲hlen, erhalten Sie die M枚glichkeit, eine\n"
+"鈥%s鈥 durchzuf眉hren. Das macht nur Sinn, wenn Sie die Pakete genau kennen\n"
+"oder wenn Sie volle Kontrolle dar眉ber haben wollen, was installiert werden\n"
+"soll.\n"
+"\n"
+"Haben Sie die Installation als 鈥%s鈥 gestartet, k枚nnen Sie die Markierungen\n"
+"aller Gruppen entfernen, um die Installation neuer Pakete zu vermeiden.\n"
+"Hierdurch werden nur bereits installierte Pakete aktualisiert oder\n"
+"repariert."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "CPU-Familie (6 steht etwa f眉r i686)."
+msgid "Accept user"
+msgstr "Benutzer akzeptieren"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "CPUID Familie"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Angabe, ob der Prozessor den Cyrix 6x86 Coma-Fehler aufweist."
+msgid "Bad choice, try again\n"
+msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma-Fehler"
+msgid "Heard and McDonald Islands"
+msgstr "Heard Island und McDonald Island"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "Kein alternativer Treiber"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "In den Experten-Modus wechseln"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Gr枚脽e des Prozessor-Caches (Second Level)."
+msgid "(on this machine)"
+msgstr "(an diesem Rechner)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Cachegr枚脽e"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Die IP Adresse des Gateways sollte etwa die Form 鈥192.168.1.42鈥 haben!"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- PCI Ger盲te: PCI-Slot, Ger盲t und Ger盲tetyp\n"
-"- EIDE Ger盲te: Master- oder Slave-Ger盲t\n"
-"- SCSI Ger盲te: Der SCSI-Bus und die Ger盲te-ID"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Standort auf den Bus"
+msgid "Looking at packages already installed..."
+msgstr "Suche nach bereits installierten Paketen ..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- PCI und USB Ger盲te: Eine Auflistung der IDs der Hersteller, Ger盲te, "
-"Subhersteller und Subger盲te von PCI / USB Ger盲ten."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Bus"
+msgid "Driver"
+msgstr "Treiber"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
+"auszuf眉hren."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+msgid "Printer on remote lpd server"
+msgstr "Drucker an LPD-Server im Netzwerk"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI Kanal"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
+"in Ihr System einbinden wollen, zu verwenden.\n"
+"\n"
+"- Sie k枚nnen die Schriften auf normalem Weg einbinden. In seltenen F盲llen \n"
+"k枚nnen defekte Schriften den X-Server lahmlegen."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot ist ein BS-Starter f眉r NewWorld MacIntosh Rechner. Er kann sowohl\n"
+"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
+"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
+"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
+"k枚nnen Sie diese hier manuell hinzuf眉gen. Stellen Sie jedoch sicher, die\n"
+"richtigen Parameter zu verwenden.\n"
+"\n"
+"Die Hauptparameter von yaboot sind:\n"
+"\n"
+" * 鈥%s鈥: Ein Text, der vor der Eingabeaufforderung angezeigt wird.\n"
+"\n"
+" * 鈥%s鈥: Hiermit wird angegeben, wohin die Informationen zum Starten Ihres\n"
+"GNU/Linux Systems geschrieben werden sollen.\n"
+"\n"
+" * 鈥%s鈥: Im Gegensatz zu LILO, stehen mit yaboot zwei Verz枚gerungen zur\n"
+"Verf眉gung. Die erste Verz枚gerung wird in Sekunden angegeben und dient zur\n"
+"Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
+"\n"
+" * 鈥%s鈥: Diese Verz枚gerung entspricht der LILO Start-Verz枚gerung. Sie haben\n"
+"nach der Auswahl von GNU/Linux diese Verz枚gerung (in 0,1 Sekunden\n"
+"Schritten) Zeit, bis der Standardkern geladen wird.\n"
+"\n"
+" * 鈥%s鈥: Markieren dieses Punkts erlaubt es Ihnen an der ersten\n"
+"Eingabeaufforderung [C] f眉r den Start von CD zu w盲hlen.\n"
+"\n"
+" * 鈥%s鈥: Markieren dieses Punkts erlaubt es Ihnen an der ersten\n"
+"Eingabeaufforderung [N] f眉r den Open Firmware Start zu w盲hlen.\n"
+"\n"
+" * 鈥%s鈥: Hiermit stellen Sie ein, welches Betriebssystem nach Ablauf der\n"
+"Open Firmware Verz枚gerung automatisch gestartet werden soll."
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid "No mouse"
+msgstr "Keine Maus"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"Der physikalische Bus, an dem sich das Ger盲t befindet (etwa: PCI, USB, ...)"
+msgid "Germany"
+msgstr "Deutschland"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "Austria"
+msgstr "脰stereich"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "Liste alternativer Soundtreiber f眉r diese Soundkarte."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Starten Sie 鈥瀞ndconfig鈥 nach der Installation, um Ihre Soundkarte "
+"einzurichten."
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternative Treiber"
+msgid "Collapse Tree"
+msgstr "Baum verkleinern"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die R眉cktaste auf den Konsolen Entfernen sendet?"
+msgid "Auto Install Configurator"
+msgstr "Auto-Installationskonfigurator"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte w盲hlen Sie Ihren Tastaturtyp."
+msgid "Configure networking"
+msgstr "Netzwerk konfigurieren"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzuf眉hren!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-#: ../../standalone/livedrake:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und dr眉cken \n"
-"Sie dann 鈥濷K鈥. Falls Sie sie nicht vorliegen haben, dr眉cken Sie \n"
-"鈥濧bbruch鈥."
+"W盲hlen Sie Ihre bevorzugte Sprache f眉r den Installationsvorgang und\n"
+"Systemlaufzeit. W盲hlen Sie zuerst die Region, in der Sie sich befinden,\n"
+"anschlie脽end die Sprache, die Sie sprechen.\n"
+"\n"
+"Durch Bet盲tigen der Schaltfl盲che 鈥%s鈥 erhalten Sie die M枚glichkeit, weitere\n"
+"Sprachen auf Ihrem Rechner zu installieren, um diese sp盲ter verwenden zu\n"
+"k枚nnen. Wollen Sie etwa Spaniern muttersprachlichen Zugang zu Ihrem System\n"
+"erlauben, w盲hlen Sie Deutsch als Hauptsprache in der Liste und im\n"
+"Fortgeschrittenen-Bereich 鈥%s鈥.\n"
+"\n"
+"Sie sind nicht auf eine weitere Sprache begrenzt. Sie k枚nnen so viele\n"
+"ausw盲hlen, wie Sie wollen, ja sogar alle, indem Sie die Schaltfl盲che 鈥%s鈥淺n"
+"verwenden. Das Ausw盲hlen einer Sprache beeinflusst die installierten\n"
+"脺bersetzungen der Programme, Schriften, Rechtschreibkorrekturen, etc. Durch\n"
+"Auswahl des Men眉punkts 鈥%s鈥 wird das System als Standardkodierung UTF-8\n"
+"Verwenden. Es sei angemerkt, dass diese Funktionalit盲t momentan noch als\n"
+"experimentell eingestuft ist. Sollten Sie jedoch verschiedene Sprachen\n"
+"ausw盲hlen, die unterschiedliche Kodierungen notwendig machen w眉rden, wird\n"
+"die Unicode-Unterst眉tzung auf jeden Fall installiert.\n"
+"\n"
+"Um die Spracheinstellungen des ganzen Systems zwischen verschiedenen\n"
+"Sprachen umzuschalten, starten Sie einfach 鈥/usr/sbin/localedrake鈥 unter\n"
+"dem privilegierten Kennzeichen 鈥瀝oot鈥. Wollen Sie die Einstellungen nur f眉r\n"
+"ein Kennzeichen 盲ndern starten Sie den selben Befehl mit eben diesem\n"
+"Kennzeichen."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "CD-ROM wechseln"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Der %s wird nicht von dieser Version von Madrake Linux unterst眉zt."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
-"Neuanmeldung wirksam"
+msgid "DHCP client"
+msgstr "DHCP Klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Speichern unter..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Bitte geben Sie Ihre E-Mail-Adresse ein"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "Benachrichtigungskonfiguration"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Sind Sie sicher, dass Sie mit diesem Rechner drucken wollen?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Sie erhalten eine Nachricht, wen die Load 眉ber diesen Wert steigt"
+msgid "New devfs device"
+msgstr "Neues DevFS Ger盲t"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "Einstellungen laden"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Sie werden benachrichtigt, falls einer der gew盲hlten Dienste nicht mehr l盲uft"
+msgid "Boot Style Configuration"
+msgstr "Konfiguration der Boot-Einstellungen"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Automatische Zeit-Synchronisation (durch NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "Dienste einstellen"
+msgid "Backup files not found at %s."
+msgstr "Backup-Dateien nicht unter %s gefunden."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Danke, dass Sie sich f眉r Mandrake Linux 9.1 entschieden haben"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Armenien (Phonetisch)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH Server"
+msgid "Card model:"
+msgstr "Kartentyp:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba Server"
+msgid "Thin Client"
+msgstr "Thin Client"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix E-Mail-Server"
+msgid "Start Server"
+msgstr "Server starten"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP Server"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "DNS"
+msgid "All remote machines"
+msgstr "Alle entfernten Maschinen"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache Web-Server"
+msgid "Install themes"
+msgstr "Themen installieren"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Herzlich willkommen zum E-Mail Benachrichtigungsassistenten.\n"
-"\n"
-"Hier k枚nnen Sie Ihr Benachrichtigungssystem einrichten.\n"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Mail Benachrichtigungskonfiguration"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "E-Mail Benachrichtigung"
+msgid "Preparing installation"
+msgstr "Installation vorbereiten"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Einen Moment, ich durchsuche: %s"
+msgid "Edit selected host/network"
+msgstr "脛nderung der markierten Rechner/Netzwerke"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Inhalt der Logb眉cher"
+msgid "Add User -->"
+msgstr "Benutzer hinzuf眉gen -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Kalender"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Dateien w盲hlen"
+msgid "True Type fonts installation"
+msgstr "Installation von TrueType Schriften"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "keine 脺bereinstimmung mit"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Selbsterkennung von Druckern, die im lokalen Netzwerk h盲ngen"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "脺bereinstimmung mit"
+msgid "LAN configuration"
+msgstr "LAN Konfiguration"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Einstellungen"
+msgid "hard disk model"
+msgstr "Festplattenmodell"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ihre Logb眉cher betrachen"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr ""
+"Sie k枚nnen kein logisches LVM Medium f眉r den Einh盲ngpunkt %s verwenden."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "Suche starten"
+msgid "Get Windows Fonts"
+msgstr "Windows-Schriften verwenden"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Erkl盲rung der Mandrake Programme"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "SysLog"
+msgid "Iranian"
+msgstr "Iran"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Nachrichten"
+msgid "Croatia"
+msgstr "Kroatien"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Benutzer"
+msgid "Gateway:"
+msgstr "Gateway:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Hilfe/_脺ber ..."
+msgid "Add server"
+msgstr "Server hinzuf眉gen"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Optionen/Test"
+msgid "Remote printer name"
+msgstr "Name des entfernten Druckers"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Datei/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Datei/Speichern _unter ..."
+msgid "Device: "
+msgstr "Ger盲t: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "PrinterDrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Datei/_Speichern"
+msgid "License agreement"
+msgstr "Lizenz"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Systemoptionen"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Datei/_脰ffnen"
+msgid "Please enter the directory where backups are stored"
+msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "W盲hlen Sie Ihre Sicherheitsebene"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Datei/_Neu"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugef眉gt "
+"werden.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Nur f眉r diesen Tag zeigen"
+msgid ", USB printer"
+msgstr ", USB-Drucker"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Die dritte Maustaste emulieren?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "W盲hlen Sie die Programme, die die Schriften verwenden sollen:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Bitte w盲hlen Sie Ihren Maustyp."
+msgid "Configure X"
+msgstr "X konfigurieren"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Verbinde %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "T眉rkei (traditionelles 鈥濬鈥 Modell)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Trenne %s"
+msgid "Congratulations!"
+msgstr "Gratuliere!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
+msgid "Use owner id for execution"
+msgstr "Eigent眉mer-ID zur Ausf眉hrung benutzen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "Empfangen"
+msgid "Down"
+msgstr "Runter"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "Gesendet"
+msgid "Raw printer (No driver)"
+msgstr "Rohdaten-Drucker (kein Treiber)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "Enpfangen: "
+msgid "Install rpm"
+msgstr "Installiere RPM"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "Gesendet: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Sie k枚nnen sowohl den Befehl 鈥%s <datei>鈥 verwenden, wenn Sie in einer "
+"Konsole die Datei 鈥<datei>鈥 drucken wollen, als auch ein grafisches "
+"Hilfsprogramm verwenden: 鈥瀤pp <datei>鈥 oder 鈥瀔printer <datei>鈥. Die "
+"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
+"Drucker zu w盲hlen und die notwendigen Druckerparameter anzugeben.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Lokale Messung"
+msgid "Time remaining "
+msgstr "Verbleibende Zeit "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "Durchschnitt"
+msgid "UK keyboard"
+msgstr "Gro脽britannien"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Farbkonfiguration"
+msgid "Unmount"
+msgstr "Aush盲ngen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "Uninstall Fonts"
+msgstr "Schiften deinstallieren"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Verbindung fertiggestellt."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Verbindungstrennung erfolgt."
+msgid "German (no dead keys)"
+msgstr "Deutschland (ohne Akzenttasten)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Die Verbindungstrennung schlug fehl!"
+msgid "Transferring %s..."
+msgstr "脺bertragen von 鈥%s鈥 ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Mit dem Internet verbinden"
+msgid "32 thousand colors (15 bits)"
+msgstr "32.000 Farben (15 Bit)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Vom Internet trennen"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Sie k枚nnen die Dateien mittels Samba oder NFS anbieten. Welche Variante "
+"wollen Sie?"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Bitte warten, Test Ihrer Verbindung..."
+msgid "Reboot"
+msgstr "Systemneustart"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logs"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Verbindungszeit: "
+msgid "Mandrake Control Center"
+msgstr "Mandrake Kontrollzentrum"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Enpfangsgeschwindigkeit: "
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Sie k枚nnen verschiedene Ports angeben. \n"
+"Korrekte Beispiele sind: 139/tcp 139/udp.\n"
+"F眉r weitere Informationen schauen Sie in 鈥/etc/services鈥."
-#: ../../standalone/net_monitor:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Sendegeschwindigkeit: "
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
+"Probleme auftreten, k枚nnen Sie in der hier aufgef眉hrten Liste Ihr Modell\n"
+"ausw盲hlen."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Statistiken"
+msgid "\t-Tape \n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Netzwerk眉berwachung"
+msgid "Remember this password"
+msgstr "Passwort behalten"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Lese Daten installierter Drucker ..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Name/IP-Adresse des Rechners:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t- Netzwerk per SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-"Der Rechner ist bereits in der Liste, er kann nicht erneut hinzugef眉gt "
-"werden.\n"
+"Falls der gew眉nschte Drucker bereits gefunden wurde, w盲hlen Sie ihn einfach "
+"aus der Liste unten aus und geben Sie - falls notwendig - Name, Passwort und/"
+"oder Dom盲ne an."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "ScannerDrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Den freien Platz der Windows Partition verwenden"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Sie m眉ssen einen Rechnernamen oder eine IP eingeben.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s an %s gefunden. Wolen Sie eine automatische Einrichtung?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"W盲hlen Sie den Rechner, dem der lokale Scanner bekannt gemacht werden sollen:"
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "Gemeinsamer Zugriff auf lokale Scanner"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 Treiber: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This machine"
-msgstr "Dieser Rechner"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"IP-Adresse bzw. Netzwerk sind bereits in der Liste, \n"
+"Sie k枚nnen sie nicht erneut hinzuf眉gen.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove selected host"
-msgstr "L枚schen des markierten Rechners"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup Report \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host"
-msgstr "脛nderung des markierten Rechners"
+msgid "Choose the packages you want to install"
+msgstr "Zu installierende Pakete ausw盲hlen"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add host"
-msgstr "Hinzuf眉gen eines Rechners"
+msgid "Papua New Guinea"
+msgstr "Papua-Neuguinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Das sind die Rechner, f眉r die der Scanner zug盲nglich sein soll:"
+msgid "Serbian (cyrillic)"
+msgstr "Serbien (Kyrillisches Layout)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Scanner an anderen Rechnern nutzen"
+msgid "Make kernel message quiet by default"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All remote machines"
-msgstr "Alle entfernten Maschinen"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Das sind die Rechner und Netzwerke, f眉r die die lokalen Drucker zug盲nglich "
-"sein sollen:"
+"M枚chten Sie diesen Drucker (鈥%s鈥)\n"
+"als Standarddrucker verwenden?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Startdiskette wird erstellt..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Scanner mit folgenden Rechnern teilen:"
+msgid "Wait please, testing your connection..."
+msgstr "Bitte warten, Test Ihrer Verbindung..."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Die Drucker dieses Rechners sind f眉r andere Rechner nutzbar"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing down the network"
+msgstr "Netzwerkverbindung trennen"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Sie k枚nnen hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
-"diesem Rechner zur Verf眉gung gestellt werden sollen."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Login ID"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Hier k枚nnen Sie einstellen, ob die Drucker, die an diesem Rechner h盲ngen, "
-"f眉r andere Rechner nutzbar sein sollen und falls ja, f眉r welche."
+"NFS ist ein gel盲ufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
+"durch verschiedene Rechner gemeinsam nutzen zu k枚nnen. \n"
+"Der Dienst nfslock stellt Ihnen hierf眉r Locking-Mechanismen zur \n"
+"Verf眉gung, damit eine Datei nicht durch mehrere Personen \n"
+"gleichzeitig ver盲ndert werden kann."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP-Klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Suche nach neuen Scannern ..."
+msgid "dismiss"
+msgstr "Verwerfen"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Suche nach eingerichteten Scannern ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Drucken/Scannen mit 鈥%s鈥"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Gemeinsamer Scannerzugriff"
+msgid "omit raid modules"
+msgstr " RAID-Module weglassen "
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Scanner manuell hinzuf眉gen"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Der Dienst LPD ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
+"diesen Dienst abschalten werden Druckauftr盲ge nicht mehr abgearbeitet.\n"
+"Hauptaufgabe von LPD ist es, Druckauftr盲ge an den jeweiligen \n"
+"zust盲ndigen Drucker (dieser kann auch einen anderen Rechner h盲ngen) \n"
+"zu senden."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Suche nach neuen Scanern"
+msgid "Internet Connection Configuration"
+msgstr "Konfiguration der Internetverbindung"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Ich konnte keine Scanner direkt an Ihrem Rechner finden.\n"
+msgid "comma separated numbers"
+msgstr "durch Kommas getrennte Nummern"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Der folgende Scanner\n"
-"\n"
-"%s\n"
-"ist direkt an Ihr System angeschlossen.\n"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Markierte Regel eine Ebene h枚her verschieben"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Die folgenden Scanner\n"
+"Der folgende Scanner\n"
"\n"
"%s\n"
-"sind direkt an Ihr System angeschlossen.\n"
+"ist direkt an Ihr System angeschlossen.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "M枚chten Sie den Drucker 鈥%s鈥 wirklich entfernen?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "choose device"
-msgstr "Ger盲t w盲hlen"
+msgid "I can't find any room for installing"
+msgstr "Ich finde nicht genug Platz f眉r die Installation."
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Bitte w盲hlen Sie den Ger盲tenamen, an dem Ihr 鈥%s鈥 h盲ngt."
+msgid "Default printer"
+msgstr "Standarddrucker"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Suche nach neuen Scannern ..."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "/Drucker automatisch erkennen"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
+"Internet zu verbinden. Bitte w盲hlen Sie, welche Verbindungsart\n"
+"ich versuchen soll.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Anmerkung: Parallelports k枚nnen nicht automatisch erkannt werden)"
+msgid "Modify RAID"
+msgstr "RAID modifizieren"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Der Scanner 鈥%s鈥 Scanner muss von PrinterDrake konfiguriert werden.\n"
-"Sie k枚nnen PrinterDrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
-"starten."
+"Ich habe eine PCI ISDN-Karte gefunden, \n"
+"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
+"indem Sie im n盲chsten Men眉 eine ausw盲hlen."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Der Scanner 鈥%s鈥 wird nicht unterst眉tzt"
+msgid "Add user"
+msgstr "Benutzer hinzuf眉gen"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Der %s wird nicht von dieser Version von ScannerDrake unterst眉zt."
+msgid "RAID-disks %s\n"
+msgstr "RAID Platten %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Der %s wird nicht von dieser Version von Madrake Linux unterst眉zt."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Tastatur ausw盲hlen"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Gefundendenes Modell: %s"
+msgid "Format partitions"
+msgstr "Partitionen formatieren"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Automatische Korrektur der CUPS Konfiguration"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "W盲hlen Sie einen Scanner"
+msgid "Running \"%s\" ..."
+msgstr "鈥%s鈥 ausf眉hren ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
+msgid "enable radio support"
+msgstr "Radiobetrieb aktivieren"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s an %s gefunden. Wolen Sie eine automatische Einrichtung?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Hardwareerkennung l盲uft"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Einige Ger盲te wurden hinzugef眉gt:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Scanner mit folgenden Rechnern teilen:"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Einige Ger盲te in der Klasse %s wurden entfernt:\n"
+msgid "Loopback file name: %s"
+msgstr "Dateiname des Loopbacks: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
-"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
-"GNU/Linux-Gemeinde."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Bitte w盲hlen Sie den Drucker, an den die Druckauftr盲ge gehen sollen."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Willkommen in der Open Source Welt."
+msgid "Do not transfer printers"
+msgstr "Druckerdaten nicht 眉bertragen"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Danke, dass Sie sich f眉r Mandrake Linux 9.1 entschieden haben"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren 鈥濩ommunity鈥-"
-"Seiten finden, um Ihre wissen mit Anderen zu teilen."
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Wollen Sie mehr 眉ber die Open Source Gemeinde wissen? Betreten Sie die Welt "
-"der Freien Software!"
+msgid "Please check for multisession CD"
+msgstr "f眉r Multisession-CD markieren"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "user"
+msgstr "Benutzer"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
-"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
-"bearbeiten sowie Videos abzuspielen ..."
+msgid "Use Hard Disk to backup"
+msgstr "Auf Festpaltte sichern"
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Configure"
+msgstr "Konfigurieren"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "ScannerDrake"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake Terminal Server Konfiguration"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Mandrake Linux 9.1 bietet 11 Arbeitsumgebungen, die Sie nach Ihren W眉nschen "
-"gestalten k枚nnen, darunter: KDE 3, Gnome 2 und WindowMaker"
+"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
+"diese ihr Netzwerk."
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Backup Users"
+msgstr "Benutzerkennzeichen sichern"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Bitte geben Sie ihren Rechnernamen an.\n"
+"Ihr Rechnername sollte auch die Domain beinhalten,\n"
+"etwa 鈥瀖einrechner.meineabteilung.meinefirma.de鈥.\n"
+"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 ist die ultimative Entwicklungsplattform."
+msgid "Select Printer Spooler"
+msgstr "W盲hlen Sie das Drucksystem"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
-"leistungsf盲higen Server: Web, E-Mail, Firewall, Router, Datei- und "
-"Druckserver, ..."
+msgid "Create new theme"
+msgstr "Ein neues Thema erzeugen"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Verwandeln Sie Ihren Rechner in einen zuverl盲ssigen Server."
+msgid "Mandrake Tools Explanation"
+msgstr "Erkl盲rung der Mandrake Programme"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Unser komplettes Angebot an Linux-L枚sungen, sowie Sonderangebote und "
-"Fanartikel sind in unseremm e-Store erh盲ltlich:"
+msgid "No image found"
+msgstr "Kein Abbild gefunden"
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Der offizille MandrakeSoft Laden"
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"MandrakeSoft arbeitet mit einer Reihe von Firmen zusammen, die "
-"professionelle Linux-L枚sungen anbieten, die Mandrake-kompatibel sind. Sie "
-"finden eine Liste im MandrakeStore."
+"Einige wichtige Pakete wurden nicht richtig installiert. \n"
+"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
+"Testen Sie die CD-ROM auf einem Linux-Rechner mittels 鈥瀝pm -qpl \n"
+"Mandrake/rpms/*.rpm鈥淺n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "Gefundendenes Modell: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimieren Sie Ihre Sicherheit"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Sie erhalten das Produkt in unserem WebShop: MadrakeStore."
+msgid "Azerbaijan"
+msgstr "Aserbaidschan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (USA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
+"Der physikalische Bus, an dem sich das Ger盲t befindet (etwa: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Werden Sie ein 鈥濵andrakeExpert鈥"
+msgid "Security level"
+msgstr "Sicherheitsebene"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Alle Vorf盲lle werden werden von einem einzelnen qualifizierten MandrakeSoft "
-"Experten bearbeitet."
+msgid "final resolution"
+msgstr "endg眉ltige Aufl枚sung"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Eine Online-Plattform, die speziell auf die Bed眉rfnisse von Firmenkunden "
-"zugeschnitten wurde."
+msgid "Services"
+msgstr "Dienste"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19358,10 +19367,6 @@ msgstr ""
"(KSpread, Gnumeric), PDF-Betrachter, usw."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spiel-Station"
@@ -19436,10 +19441,6 @@ msgstr ""
"zugeh枚riger Programme"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische Arbeitsoberfl盲che"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-Arbeitsplatz"
@@ -19459,10 +19460,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Entwicklungsplattform"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C und C++ Entwicklung: Bibliotheken, Programme und Include-Dateien"
@@ -19534,847 +19531,74 @@ msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimediarechner"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Video station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Video playing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Graphic station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Graphics programs"
-msgstr "Bildverarbeitungsprogramme wie der GIMP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Programme zum E-Mail bzw. News lesen und senden (pine, mutt, tin, ...)sowie "
"zum durchst枚bern des WWW"
-#~ msgid "Printer sharing"
-#~ msgstr "Gemeinsamer Druckerzugriff"
-
-#~ msgid ""
-#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
-#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
-#~ "raster format for the data sent to the printer. The driver for these "
-#~ "printers is still in a very early development stage and so it will "
-#~ "perhaps not always work properly. Especially it is possible that the "
-#~ "printer only works when you choose the A4 paper size.\n"
-#~ "\n"
-#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
-#~ "was originally created, need their firmware to be uploaded to them after "
-#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
-#~ "search the printer's Windows driver CD or your Windows partition for the "
-#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
-#~ "following commands:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "The first command can be given by any normal user, the second must be "
-#~ "given as root. After having done so you can print normally.\n"
-#~ msgstr ""
-#~ "Ihr Drucker geh枚rt zu der Gruppe von GDI-Laserdruckern (winprinters), "
-#~ "welche das Zenographics-ZJ-Stream-Rasterformat f眉r die zum Drucker zu "
-#~ "眉bertragenden Daten erwarten. Der Treiber f眉r dieses Format ist noch in "
-#~ "einem fr眉hen Entwicklungsstadium und daher wird er wahrscheinlich nicht "
-#~ "immer perfekt funktionieren. Insbesondere ist es m枚glich, dass der "
-#~ "Drucker nur funktioniert, wenn Sie A4 als Papierformat w盲hlen.\n"
-#~ "\n"
-#~ "Bei einige dieser Drucker, wie zum Beispiel der HP LaserJet 1000, f眉r den "
-#~ "dieser Treiber urspr眉nglich entwickelt wurde, muss die Firmware nach "
-#~ "jedem Einschalten in den Drucker geladen werden. Im Falle des HP "
-#~ "LaserJet 1000 m眉ssen Sie die mit dem Drucker mitgelieferte Windows-"
-#~ "Treiber-CD oder Ihre Windows-Partition nach der Datei sihp1000.img "
-#~ "durchsuchen und diese mit einem der folgenden Kommandos in den Drucker "
-#~ "laden:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "Das erste Kommando kann von jedem Benutzer gegeben werden, das Zweite "
-#~ "muss als root gegeben werden. Danach k枚nnen Sie dann ganz normal "
-#~ "drucken.\n"
-
-#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgstr "GDI-Laserdrucker, der das Zenographics-ZJ-Stream-Format benutzt"
-
-#~ msgid "Office"
-#~ msgstr "Office"
-
-#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
-#~ msgstr "Programme f眉r Mail, News, WWW, FTP und Chat"
-
-#~ msgid "Games"
-#~ msgstr "Spiele"
-
-#~ msgid "Multimedia - Graphics"
-#~ msgstr "Multimedia / Grafik"
-
-#~ msgid "Multimedia - Sound"
-#~ msgstr "Multimedia / Sound"
-
-#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-#~ msgstr "Audio Programme: MP3- und Midi-Abspieler, Mixer, usw."
-
-#~ msgid "Multimedia - Video"
-#~ msgstr "Multimedia / Video"
-
-#~ msgid "Video players and editors"
-#~ msgstr "Videoabspieler und Editoren"
-
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multimedia / CD-Brenner"
-
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "Werkzeuge zur Erstellung und zum Brennen von CDs"
-
-#~ msgid "More Graphical Desktops (Gnome, IceWM)"
-#~ msgstr "Weitere Arbeitsoberfl盲chen (GNOME, IceWM)"
-
-#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-#~ msgstr "GNOME, IceWM, Window Maker, Enlightenment, Fvwm, usw."
-
-#~ msgid "Personal Information Management"
-#~ msgstr "Pers枚nliches Informationsmanagement"
-
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "Werkzeuge f眉r Ihren Palm Pilot oder Ihren Visor"
-
-#~ msgid "Personal Finance"
-#~ msgstr "Finanzverwaltung"
-
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "Finanzverwaltungsprogramme, etwa Gnucash"
-
-#~ msgid "no network card found"
-#~ msgstr "Keine Netzwerkkarte gefunden"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 has selected the best software for you. Surf the Web "
-#~ "and view animations with Mozilla and Konqueror, or read your mail and "
-#~ "handle your personal information with Evolution and Kmail"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 stellt Ihnen die beste Softwareauswahl bereit, um auf "
-#~ "alles, was das Internet bietet, zugreifen zu k枚nnen. Surfen Sie im Web "
-#~ "mit Mozilla oder Konqueror, bearbeiten Sie E-Mails und verwalten Sie "
-#~ "pers枚nliche Informationen mit Evolution, KMail oder zahlreichen anderen "
-#~ "Programmen."
-
-#~ msgid "Get the most from the Internet"
-#~ msgstr "Nutzen Sie das Internet nach Ihren W眉nschen"
-
-#~ msgid "Push multimedia to its limits!"
-#~ msgstr "Gehen Sie bis an die Grenzen Ihrer multimedialen M枚glichkeiten"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetverbindung und -einrichtung"
-#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
-#~ msgstr "Entdecken Sie die atuellsten Grafik- und Multimedia-Programme!"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
-#~ "strategy, ..."
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 bietet die besten Open Source Spiele der Bereiche: "
-#~ "Arcade, Karten, Action, Strategie, ..."
+#~ msgid "Configure the connection"
+#~ msgstr "Die Verbindung konfigurieren"
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides a powerful tool to fully customize and "
-#~ "configure your machine"
-#~ msgstr ""
-#~ "Das Mandrake Linux Kontrollzentrum ist der zentrale Ort, an dem Sie Ihr "
-#~ "System nach Ihren W眉nschen anpassen k枚nnen."
-
-#~ msgid "User interfaces"
-#~ msgstr "Arbeitsumgebungen"
-
-#~ msgid ""
-#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
-#~ "Source development environments"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 ist die ultimative Entwicklungsplattform. Nutzen Sie "
-#~ "die volle Power des GNU C Compilers sowie der besten Open Source "
-#~ "Entwicklungsumgebungen."
+#~ msgid "Disconnect"
+#~ msgstr "Verbindung trennen"
-#~ msgid "Development simplified"
-#~ msgstr "Softwareentwicklung leicht gemacht"
+#~ msgid "Connect"
+#~ msgstr "Verbinden"
#~ msgid ""
-#~ "This firewall product includes network features that allow you to fulfill "
-#~ "all your security needs"
-#~ msgstr ""
-#~ "Dieses Firewall-Produkt enth盲lt die Netzwerkkomponenten, um all Ihren "
-#~ "Sicherheitsanspr眉chen gerecht werden zu k枚nnen."
-
-#~ msgid ""
-#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
-#~ "N.F.)"
-#~ msgstr ""
-#~ "Die MandrakeSecurity Palette bietet unter Anderem die 鈥濵ulti Network "
-#~ "Firewall鈥 (M.N.F.)"
-
-#~ msgid "Strategic partners"
-#~ msgstr "Strategische Partner"
-
-#~ msgid ""
-#~ "Whether you choose to teach yourself online or via our network of "
-#~ "training partners, the Linux-Campus catalogue prepares you for the "
-#~ "acknowledged LPI certification program (worldwide professional technical "
-#~ "certification)"
-#~ msgstr ""
-#~ "Ob Sie sich online fortbilden wollen, oder mit Hilfe unseres Netzes an "
-#~ "Trainingspartnern, der Linux-Campus Katalog bereitet Sie auf die "
-#~ "anerkannte LPI zerifizierung vor."
-
-#~ msgid "Certify yourself on Linux"
-#~ msgstr "Zertifizueren Sie sich selbst in Sachen Linux"
-
-#~ msgid ""
-#~ "The training program has been created to respond to the needs of both end "
-#~ "users and experts (Network and System administrators)"
-#~ msgstr ""
-#~ "Das Trainingsprogramm wurde f眉r die Bed眉rfnisse sowohl von Endanwendern, "
-#~ "als auch von Experten (Netzwerk- und Systemadministratoren)"
-
-#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
-#~ msgstr "Entdecken Sie MandrakeSofts Training-Katalog: Linux-Campus"
-
-#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
-#~ msgstr "Entdecken Sie den MandrakeClub und den Mandrake Corporate Club"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#, fuzzy
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of various information it has\n"
-#~ "about your system. Depending on your installed hardware, you may have "
-#~ "some\n"
-#~ "or all of the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": check the current mouse configuration and click on the "
-#~ "button\n"
-#~ "to change it if necessary.\n"
-#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
-#~ "the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
-#~ "country, click on the button and choose another one.\n"
-#~ "\n"
-#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-#~ "primary language you have chosen. But here, just as in your choice of a\n"
-#~ "keyboard, you may not be in a country to which the chosen language\n"
-#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
-#~ "configure the clock for the correct timezone.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
-#~ "printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
#~ "\n"
-#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-#~ "click that button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-#~ "interface in \"800x600\" resolution. If that does not suits you, click "
-#~ "on\n"
-#~ "the button to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"Network\": If you want to configure your Internet or local network\n"
-#~ "access now, you can by clicking on this button.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. If you notice the sound card displayed is not the one "
-#~ "that\n"
-#~ "is actually present on your system, you can click on the button and "
-#~ "choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. If you have a TV card and it is not detected, click on the button "
-#~ "to\n"
-#~ "try to configure it manually.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated with the card."
+#~ "You can reconfigure your connection."
#~ msgstr ""
-#~ "Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je "
-#~ "nach\n"
-#~ "vorhandener Hardware sehen Sie hier (oder eben nicht) folgende Eintr盲ge:\n"
-#~ "\n"
-#~ " * 鈥濵aus鈥: Kontrollieren Sie die Mauskonfiguration und dr眉cken Sie den "
-#~ "Knopf,\n"
-#~ "um sie, wenn n枚tig, zu 盲ndern;\n"
#~ "\n"
-#~ " * 鈥濼astatur鈥: Kontrollieren Sie die aktuelle Tastaturkonfiguration "
-#~ "dr眉cken Sie\n"
-#~ "den Knopf, um sie, wenn n枚tig, zu 盲ndern;\n"
-#~ "\n"
-#~ " * 鈥瀂eitzone鈥: DrakX versucht die Zeitzone anhand der gew盲hlten Sprache\n"
-#~ "zu erraten. Aber hier, genau wie bei der Tastatur, ist es jedoch m枚glich, "
-#~ "dass\n"
-#~ "Sie sich nicht in dem Land befinden, zu dem die vorgegebene Sprache "
-#~ "erahnen\n"
-#~ "geh枚rt. In diesem Fall sollten Sie den Knopf dr眉cken, um die Uhr "
-#~ "entsprechend\n"
-#~ "Ihrer lokalen Zeitzone zu setzen.\n"
-#~ "\n"
-#~ " * 鈥濪rucker鈥: Durch Anwahl der Schaltfl盲che 鈥濳ein Drucker鈥 starten Sie "
-#~ "den\n"
-#~ "Druckerassistenten. F眉r mehr Informationen, wie man einen neuen Drucker\n"
-#~ "einrichtet, schlagen Sie im dazugeh枚rige Kapitel aus dem 鈥濻tarter Guide鈥淺n"
-#~ "nach. Die dort pr盲sentierte Schnittstelle 盲hnelt der, die w盲hrend der "
-#~ "Installation\n"
-#~ "verwendet wird; \n"
-#~ " * 鈥濻oundkarte鈥: Falls eine Soundkarte in Ihrem Rechner gefunden wurde,\n"
-#~ "wird sie hier angezeigt.\n"
-#~ "\n"
-#~ " * 鈥濼V-Karte鈥: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird\n"
-#~ "sie hier angezeigt.\n"
-#~ "\n"
-#~ " * 鈥濱SDN Karte鈥: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde,\n"
-#~ "wird sie hier angezeigt. Durch Anwahl der Schaltfl盲che k枚nnen Sie die\n"
-#~ "Parameter 盲ndern."
+#~ "Sie k枚nnen Ihre Internetverbindung neu konfigurieren"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#, fuzzy
#~ msgid ""
-#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a grub/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or "
-#~ "another\n"
-#~ "OS.\n"
-#~ "\n"
-#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader.\n"
-#~ "\n"
-#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
-#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
-#~ "disk\n"
-#~ "(\"On Floppy\").\n"
-#~ "\n"
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
-#~ "Die Mandrake Linux CD-ROM hat einen eingebauten Rettungsmo颅dus. Sie\n"
-#~ "erreichen ihn durch Starten von CD-ROM, und Dr眉cken von 禄F1芦 bei\n"
-#~ "Bootbeginn. Geben Sie dann 禄rescue芦 an der Eingabeaufforderung ein. "
-#~ "Falls\n"
-#~ "Ihr Rechner nicht von CD-ROM starten kann, sollten Sie diesen Punkt\n"
-#~ "unbedingt aus zwei Gr眉nden abarbeiten:\n"
-#~ "\n"
-#~ " * Wenn DrakX den Betriebssystemstarter installiert, schreibt es den\n"
-#~ "Boot-Sektor (MBR) Ihrer prim盲ren Festplatte neu (au脽er Sie wollen einen\n"
-#~ "anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-#~ "vorhandenen Betriebssysteme starten k枚nnen (etwa Windows und GNU/Linux).\n"
-#~ "Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu "
-#~ "fragen\n"
-#~ "- Ihren Boot-Sektor 眉berschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-#~ "mehr starten k枚nnen! Mit einer Startdiskette k枚nnen Sie Ihr\n"
-#~ "GNU/Linux-System dann trotzdem hochfahren und diese 脛nderungen "
-#~ "r眉ckg盲ngig\n"
-#~ "machen.\n"
#~ "\n"
-#~ " * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-#~ "GNU/Linux von der Festplatte unm枚glich machen, ist diese Startdiskette "
-#~ "so\n"
-#~ "ziemlich die einzige M枚glichkeit, auf Ihr System zuzugreifen. Zudem "
-#~ "enth盲lt\n"
-#~ "sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-#~ "Systemfehlern (nach einem Stromausfall, einen ungl眉cklichen Tippfehler "
-#~ "in\n"
-#~ "einem Passwort, etc.) helfen werden.\n"
-#~ "\n"
-#~ "Wenn Sie diesen Schritt anw盲hlen, wird 鈥濪rakX鈥 Sie bitten, eine Diskette "
-#~ "in\n"
-#~ "ein Laufwerk zu legen. Die Diskette sollte nat眉rlich leer sein "
-#~ "(zumindest\n"
-#~ "keine relevanten Daten enthalten). Sie muss nicht formatiert sein, "
-#~ "鈥濪rakX鈥淺n"
-#~ "k眉mmert sich um alles."
+#~ "Sie k枚nnen eine Internetverbindung aufbauen oder die Verbindung neu "
+#~ "konfigurieren"
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Sie sind momentan nicht mit dem Internet verbunden."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#, fuzzy
#~ msgid ""
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
-#~ "Die Mandrake Linux CD-ROM hat einen eingebauten Rettungsmo颅dus. Sie\n"
-#~ "erreichen ihn durch Starten von CD-ROM, und Dr眉cken von 禄F1芦 bei\n"
-#~ "Bootbeginn. Geben Sie dann 禄rescue芦 an der Eingabeaufforderung ein. "
-#~ "Falls\n"
-#~ "Ihr Rechner nicht von CD-ROM starten kann, sollten Sie diesen Punkt\n"
-#~ "unbedingt aus zwei Gr眉nden abarbeiten:\n"
-#~ "\n"
-#~ " * Wenn DrakX den Betriebssystemstarter installiert, schreibt es den\n"
-#~ "Boot-Sektor (MBR) Ihrer prim盲ren Festplatte neu (au脽er Sie wollen einen\n"
-#~ "anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-#~ "vorhandenen Betriebssysteme starten k枚nnen (etwa Windows und GNU/Linux).\n"
-#~ "Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu "
-#~ "fragen\n"
-#~ "- Ihren Boot-Sektor 眉berschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-#~ "mehr starten k枚nnen! Mit einer Startdiskette k枚nnen Sie Ihr\n"
-#~ "GNU/Linux-System dann trotzdem hochfahren und diese 脛nderungen "
-#~ "r眉ckg盲ngig\n"
-#~ "machen.\n"
#~ "\n"
-#~ " * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-#~ "GNU/Linux von der Festplatte unm枚glich machen, ist diese Startdiskette "
-#~ "so\n"
-#~ "ziemlich die einzige M枚glichkeit, auf Ihr System zuzugreifen. Zudem "
-#~ "enth盲lt\n"
-#~ "sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-#~ "Systemfehlern (nach einem Stromausfall, einen ungl眉cklichen Tippfehler "
-#~ "in\n"
-#~ "einem Passwort, etc.) helfen werden.\n"
-#~ "\n"
-#~ "Wenn Sie diesen Schritt anw盲hlen, wird 鈥濪rakX鈥 Sie bitten, eine Diskette "
-#~ "in\n"
-#~ "ein Laufwerk zu legen. Die Diskette sollte nat眉rlich leer sein "
-#~ "(zumindest\n"
-#~ "keine relevanten Daten enthalten). Sie muss nicht formatiert sein, "
-#~ "鈥濪rakX鈥淺n"
-#~ "k眉mmert sich um alles."
-
-#~ msgid ""
-#~ "The following printers are configured. Double-click on a printer to "
-#~ "change its settings; to make it the default printer; to view information "
-#~ "about it; or to make a printer on a remote CUPS server available for Star "
-#~ "Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Die folgenden Drucker sind bereits eingerichtet. F眉hren Sie einen "
-#~ "Doppelklick auf einem aus, um ihn zu 盲ndern, als Standarddrucker zu "
-#~ "verwenden, Informtionen 眉ber ihn zu erhalten oder einen entfernten CUPS-"
-#~ "Drucker f眉r Star Office/OpenOffice.org/GIMP zug盲nglich zu machen."
-
-#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "Bitte geben Sie ihren Rechnernamen an.\n"
-#~ "Einige DHCP-Server ben枚tigen ihn, um korrekt zu arbeiten.\n"
-#~ "Ihr Rechnername sollte auch die Domain beinhalten,\n"
-#~ "etwa 鈥瀖einrechner.meineabteilung.meinefirma.de鈥."
-
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "DrakFloppy Fehler: %s"
-
-#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "Aurora beim Hochfahren starten"
-
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Herk枚mmlicher Gtk+ Stil"
-
-#~ msgid "Traditional Monitor"
-#~ msgstr "Herk枚mmlicher Stil"
-
-#~ msgid "NewStyle Monitor"
-#~ msgstr "Neuer Stil"
-
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "Neuer kategorisierter Monitor"
-
-#~ msgid "Secure Connection"
-#~ msgstr "Sichere Verbindung"
-
-#~ msgid "FTP Connection"
-#~ msgstr "FTP Verbindung"
-
-#~ msgid "Mail/Groupware/News"
-#~ msgstr "Server, Mail/Groupware/News"
-
-#~ msgid "Postfix mail server, Inn news server"
-#~ msgstr ""
-#~ "Postfix E-Mail-Server und\n"
-#~ "Inn Diskussionsforen-Server"
-
-#~ msgid "/Options"
-#~ msgstr "/Optionen"
-
-#~ msgid "/Autodetect jazz drives"
-#~ msgstr "/Jazz-Laufwerke automatisch erkennen"
-
-#~ msgid "/Autodetect modems"
-#~ msgstr "/Modems automatisch erkennen"
-
-#~ msgid "/Autodetect printers"
-#~ msgstr "/Drucker automatisch erkennen"
-
-#~ msgid ""
-#~ "The partition you've selected to add as root (/) is physically located "
-#~ "beyond\n"
-#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
-#~ "partition"
-#~ msgstr ""
-#~ "Die Partition, die Sie als Verzeichnisbaumwurzel (/) ausgew盲hlt haben, "
-#~ "ist physikalisch hinter dem 1024ten Zylinder Ihrer Festplatte gelegen und "
-#~ "Sie haben keine 鈥/boot鈥 Partition eingerichtet. Falls Sie den LILO "
-#~ "Betriebssystemstarter einsetzen wollen, vergessen Sie bitte nicht, eine 鈥/"
-#~ "boot鈥 Partition anzulegen!"
-
-#~ msgid ""
-#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
-#~ "> 1024).\n"
-#~ "Either you use LILO and it won't work, or you don't use LILO and you "
-#~ "don't need /boot"
-#~ msgstr ""
-#~ "Es tut mir Leid, aber ich weigere mich, eine 鈥/boot鈥 Partition \n"
-#~ "hinter dem Zylinder 1024 anzulegen.\n"
-#~ "Entweder verwenden Sie LILO und es wird nicht funktionieren, oder Sie "
-#~ "verwenden \n"
-#~ "LILO nicht, dann ben枚tigen Sie keine 鈥/boot鈥 Partition."
-
-#~ msgid "Upgrade"
-#~ msgstr "Aktualisierung"
+#~ "Sie k枚nnen die Verbindung trennen oder sie neu konfigurieren."
-#~ msgid "192.168.100.0/255.255.255.0\n"
-#~ msgstr "192.168.100.0/255.255.255.0\n"
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Sie sind momentan mit dem Internet verbunden."
-#~ msgid "192.168.100.0/24\n"
-#~ msgstr "192.168.100.0/24\n"
+#~ msgid "files sending by FTP"
+#~ msgstr "Daten眉agung via FTP"
-#~ msgid "10.1.*\n"
-#~ msgstr "10.1.*\n"
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Inkrementelles Backup (alte Backups nicht 眉berschreiben)"
-#~ msgid "10.0.0.*\n"
-#~ msgstr "10.0.0.*\n"
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "LILO ausf眉hren"
-#~ msgid "192.168.100.194\n"
-#~ msgstr "192.168.100.194\n"
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Erstellen der RamDisk: 鈥瀖kinitrd -f /boot/initrd-%s.img %s鈥."
-#~ msgid "Do you want to configure another printer?"
-#~ msgstr "M枚chten Sie einen weiteren Drucker einrichten?"
+#~ msgid "Write %s"
+#~ msgstr "Schreiben von %s"
-#~ msgid "Know how to use this printer"
-#~ msgstr "Wie dieser Drucker genutzt werden kann"
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiere 鈥%s鈥 nach 鈥%s鈥"
-#~ msgid "Preparing Printerdrake..."
-#~ msgstr "PrinterDrake vorbereiten ..."
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Anlegen einer Sicherheitskopie von 鈥%s鈥 unter 鈥%s.old鈥."
-#~ msgid "Reading printer data ..."
-#~ msgstr "Lesen der Druckertreiber-Datenbank ..."
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf-Schriftkonvertierung"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "You must indicate where you wish to place the information required to "
-#~ "boot\n"
-#~ "GNU/Linux.\n"
-#~ "\n"
-#~ "Unless you know exactly what you are doing, choose \"First sector of "
-#~ "drive\n"
-#~ "(MBR)\"."
-#~ msgstr ""
-#~ "\"Sie m眉ssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
-#~ "GNU/Linux Distribution erstellt werden sollen.\n"
-#~ "\n"
-#~ "Sofern Sie nicht genau wissen, was sie machen sollen, w盲hlen Sie 鈥濫rster\n"
-#~ "Sektor der Platte (MBR)鈥."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "DrakX now needs to know if you want to perform a default (\"Recommended"
-#~ "\")\n"
-#~ "installation or if you want to have greater control (\"Expert\") over "
-#~ "your\n"
-#~ "installation. You can also choose to do a new installation or upgrade "
-#~ "your\n"
-#~ "existing Mandrake Linux system:\n"
-#~ "\n"
-#~ " * \"Install\": completely wipes out the old system. However, depending "
-#~ "on\n"
-#~ "what is currently installed on your machine, you may be able to keep "
-#~ "some\n"
-#~ "old partitions (Linux or otherwise) unchanged;\n"
-#~ "\n"
-#~ " * \"Upgrade\": this installation class allows to simply update the\n"
-#~ "packages currently installed on your Mandrake Linux system. It keeps "
-#~ "your\n"
-#~ "hard drives' current partitions as well as user configurations. All "
-#~ "other\n"
-#~ "configuration steps remain available, similar to a normal installation;\n"
-#~ "\n"
-#~ " * \"Upgrade Packages Only\": this new installation class allows you to\n"
-#~ "upgrade an existing Mandrake Linux system while keeping all system\n"
-#~ "configurations unchanged. Adding new packages to the current "
-#~ "installation\n"
-#~ "is also possible.\n"
-#~ "\n"
-#~ "Upgrades should work fine on Mandrake Linux systems using version \"8.1"
-#~ "\"\n"
-#~ "or later.\n"
-#~ "\n"
-#~ "Depending on your GNU/Linux knowledge, select one of the following "
-#~ "choices:\n"
-#~ "\n"
-#~ " * Recommended: choose this if you have never installed a GNU/Linux\n"
-#~ "operating system. The installation will be very easy and you will only "
-#~ "be\n"
-#~ "asked a few questions;\n"
-#~ "\n"
-#~ " * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
-#~ "perform a highly customized installation. Some of the decisions you will\n"
-#~ "have to make may be difficult if you do not have good GNU/Linux "
-#~ "knowledge,\n"
-#~ "so it is not recommended that those without a fair amount of experience\n"
-#~ "select this installation class."
-#~ msgstr ""
-#~ "鈥濪rakX鈥 fragt Sie nun nach der gew眉nschten Installationsart. Sie haben "
-#~ "die\n"
-#~ "Wahl zwischen einer Standardinstallation (鈥濫mpfehlenswert鈥) und einer\n"
-#~ "Variante, in der Sie mehr Einfluss aus眉ben k枚nnen (鈥濫xperte鈥). Sie "
-#~ "m眉ssen\n"
-#~ "sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
-#~ "Aktualisierung einer bereits vorhandenen Mandrake Linux-Version "
-#~ "vornehmen\n"
-#~ "wollen. Es ist m枚glich, die Installation 眉ber ein existierendes BS zu\n"
-#~ "installieren und dieses damit zu entfernen. Sie k枚nnen auch eine\n"
-#~ "Aktualisierung vornehmen, um eine existierende Installation zu "
-#~ "reparieren.\n"
-#~ "W盲hlen Sie:\n"
-#~ "\n"
-#~ " * 鈥濱nstallieren鈥: Entfernt komplett 盲ltere Versionen von Mandrake "
-#~ "Linux,\n"
-#~ "die noch installiert sind - um genau zu sein k枚nnen Sie je nach "
-#~ "aktuellem\n"
-#~ "Inhalt Ihrer Platte auch einige 盲ltere Linux- oder anderweitige "
-#~ "Partitionen\n"
-#~ "unangetastet behalten.\n"
-#~ "\n"
-#~ " * 鈥濧ktualisieren鈥: Mit dieser Variante k枚nnen Sie eine existierende\n"
-#~ "Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-#~ "pers枚nlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-#~ "Installationsschritte werden wie bei einer Installation ausgef眉hrt.\n"
-#~ "\n"
-#~ " * 鈥濶ur Pakete aktualisieren鈥: In dieser Variante werden alle Schritte "
-#~ "der\n"
-#~ "Installation, bis auf die Auswahl der zu installierenden Pakete,\n"
-#~ "眉bersprungen.\n"
-#~ "\n"
-#~ "Aktualisierungen von Mandrake Linux 鈥8.1鈥 oder aktuelleren Systemen "
-#~ "sollten\n"
-#~ "problemlos funktionieren.\n"
-#~ "\n"
-#~ "Je nachdem, wie viel Erfahrung Sie mit GNU/Linux haben, k枚nnen Sie sich "
-#~ "f眉r\n"
-#~ "eine der folgenden Installations- oder Aktualisierungsarten f眉r Ihr\n"
-#~ "Mandrake Linux System entscheiden:\n"
-#~ "\n"
-#~ " * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
-#~ "installiert haben. Die Installation wird sehr einfach sein und es werden\n"
-#~ "Ihnen nur sehr wenige Fragen gestellt werden.\n"
-#~ "\n"
-#~ " * Experte: Wenn Sie den Umgang mit GNU/Linux 鈥瀒m Schlaf鈥 beherrschen "
-#~ "und\n"
-#~ "hochgranulare Wahlm枚glichkeiten w眉nschen, ist dies Ihre\n"
-#~ "Installationsmethode. Wie bei der benutzerdefinierten Installation "
-#~ "k枚nnen\n"
-#~ "Sie die haupts盲chliche Verwendung festlegen: 鈥濧rbeitsplatzrechner鈥,\n"
-#~ "鈥濫ntwicklungsplattform鈥 oder 鈥濻erver鈥. Seien Sie sehr vorsichtig, wenn "
-#~ "Sie\n"
-#~ "sich f眉r diese Installationsklasse entscheiden. Die Antworten auf einige\n"
-#~ "Fragen k枚nnen sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
-#~ "Stabilit盲t Ihrer Distribution haben. W盲hlen Sie diese "
-#~ "Installationsklasse\n"
-#~ "also wirklich nur wenn Sie wissen, was Sie tun!\n"
-#~ "\n"
-#~ "Dieses Handbuch wird sich auf die Installationsart 鈥濫xperte鈥 "
-#~ "konzentrieren.\n"
-#~ "Sollten Sie sich stattdessen f眉r die Klasse 鈥濫mpfehlenswert鈥 "
-#~ "entscheiden,\n"
-#~ "眉berlesen Sie bitte einfach die Abschnitte, die f眉r Sie nicht zutreffen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid "Please be patient. This operation can take several minutes."
-#~ msgstr ""
-#~ "Haben Sie bitte etwas Geduld. Diese Aktion kann einige Minuten dauern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "Your new Mandrake Linux operating system is currently being installed.\n"
-#~ "Depending on the number of packages you will be installing and the speed "
-#~ "of\n"
-#~ "your computer, this operation could take from a few minutes to a\n"
-#~ "significant amount of time.\n"
-#~ "\n"
-#~ "Please be patient."
-#~ msgstr ""
-#~ "Ihr neues Mandrake Linux System wird nun installiert. Abh盲ngig von der\n"
-#~ "Anzahl Pakete und der Geschwindigkeit Ihres Rechners kann dies zwischen\n"
-#~ "einigen Minuten und mehreren Stunden dauern.\n"
-#~ "\n"
-#~ "Haben Sie noch etwas Gerduld."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
-#~ "\n"
-#~ "You will be presented the list of available resolutions and color depth\n"
-#~ "available for your hardware. Choose the one that best suit your needs "
-#~ "(you\n"
-#~ "will be able to change that after installation though). When you are\n"
-#~ "satisfied with the sample shown in the monitor, click \"OK\". A window "
-#~ "will\n"
-#~ "then appear and ask you if you can see it.\n"
-#~ "\n"
-#~ "If you are doing an \"Expert\" installation, you will enter the X\n"
-#~ "configuration wizard. See the corresponding section of the manual for "
-#~ "more\n"
-#~ "information about this wizard.\n"
-#~ "\n"
-#~ "If you can see the message during the test, and answer \"Yes\", then "
-#~ "DrakX\n"
-#~ "will proceed to the next step. If you cannot see the message, it simply\n"
-#~ "means that the configuration was wrong and the test will automatically "
-#~ "end\n"
-#~ "after 10 seconds, restoring the screen. Refer then to the video\n"
-#~ "configuration section of the user guide for more information on how to\n"
-#~ "configure your display."
-#~ msgstr ""
-#~ "X (das X Window System) ist das Herz der grafischen Benutzeroberfl盲che "
-#~ "von\n"
-#~ "GNU/Linux. Es bildet die Grundlage f眉r die Vielzahl grafischer\n"
-#~ "Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, "
-#~ "GNOME,\n"
-#~ "AfterStep oder WindowMaker). Auch hier wird 鈥濪rakX鈥 die Konfiguration\n"
-#~ "soweit wie m枚glich selbstst盲ndig vollziehen.\n"
-#~ "\n"
-#~ "Sollten Sie nicht gerade sehr alte, sehr neue oder exotische "
-#~ "Grafikhardware\n"
-#~ "einsetzen, wird 鈥濪rakX鈥 die Konfiguration erfolgreich durchf眉hren und\n"
-#~ "anschlie脽end die grafische Oberfl盲che mit der bestm枚glichen Aufl枚sung\n"
-#~ "starten! Es erscheint ein Testfenster und Sie werden anschlie脽end "
-#~ "gefragt,\n"
-#~ "ob die Anzeige einwandfrei war.\n"
-#~ "\n"
-#~ "Falls Sie eine 鈥濫xperte鈥渘-Installation vornehmen, werden Sie in den\n"
-#~ "folgenden Schritten von dem 鈥濪rakX鈥-Konfigurationsassistenten begleitet.\n"
-#~ "\n"
-#~ "Falls das Bild korrekt dargestellt wird, w盲hlen Sie bitte die "
-#~ "Schaltfl盲che\n"
-#~ "鈥濲a鈥 an, 鈥濪rakX鈥 wird dann mit dem n盲chsten Schritt der Installation\n"
-#~ "fortfahren. Sollte der Schirm aus irgendwelchen Gr眉nden nicht lesbar "
-#~ "sein,\n"
-#~ "m眉ssen Sie nur 10 Sekunden warten. Anschlie脽end sollte wieder das\n"
-#~ "Konfigurationsmen眉 erscheinen."
-
-#~ msgid "Switching between ALSA and OSS help"
-#~ msgstr "Hilfe zum Wechsel zwischen ALSA und OSS"
-
-#~ msgid "Detecting devices ..."
-#~ msgstr "Ger盲teerkennung..."
-
-#~ msgid "Test ports"
-#~ msgstr "Test der Anschl眉sse"
+#~ msgid "Fonts conversion"
+#~ msgstr "Konvertieren der Schriften"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
index edcb98ebb..8fab6ea14 100644
--- a/perl-install/share/po/el.po
+++ b/perl-install/share/po/el.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-el\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-06-14 23:44+0300\n"
"Last-Translator: 瓦觑 妄牯狁珧 (Nick Niktaris) <niktarin@yahoo.com>\n"
"Language-Team: Greek <nls@tux.hellug.gr>\n"
@@ -16,1938 +16,1130 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"燥 觑轫耒篝 犴 黢摅翮 贶礤 黢摅 翮 镬茕狎 \"fileshare\". \n"
-"甜锺暹翦 磲 翮 瘃矬栎箦翦 篝镯 贶桢 黢摅翮 箦 狨艮 翮 镬茕 戾 麸 "
-"userdrake."
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cancel"
-msgstr "蛾躐"
+msgid "Scanning partitions to find mount points"
+msgstr "另茈躞 赆翎綮摅妁 汩 瘃矬溟锺轶禳 箸戾啭 簖礓弩珧."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "抨赀礴箸 userdrake"
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "犴 锺轶翦 磲, 蓦邈黠 汩 瘃镨蒹彘/狯衢褫箦轵 狁麇啭 suid root."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"容脲翦 磲 屦轸褫翦 篝秕 黢摅翦 磲 蓣秕 觑轫耒篝秕 赆翎朦泔躜;\n"
-"另 磲 酎翦 镩 黢摅翦 栳 祓锺稞 狃胲 磲 贶盹蹴 觌殛 篝 \"曙轫耒篝颸" "
-"篝镯 konqueror 赆 麸 nautilus.\n"
-"\n"
-"燥 \"旭矬狁祜箪蓓颸" 屦轸褫疱 翮 犴 黢摅翮 颀桁轶.\n"
+msgid "\t\tErase=%s"
+msgstr "\t\t逾摅殪=%s"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "疙 狃狁徇翮麸 狁麇唢 (麸 %s ) 溴 躔荞麇"
+msgid "network printer port"
+msgstr "椠襻 尻趱瘗艮 溟牯"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-"甜锺暹翦 磲 氵礤 孱徙 戾 翮 黢摅 NFS Samba. 嗅襻赆膻 屦殡蓊翦 痫唢 "
-"栎脲翦."
+msgid "Please insert floppy disk:"
+msgstr "嗅襻赆膻 彘筌沐翦 溟箨蒴 抨赀礴箸:"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "燥 疳贻麸 %s 瘃蒺彘 磲 犴徕徼扉篝暹. 容脲翦 磲 麸 邈赆翎篝摅弭;"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Custom"
-msgstr "旭矬狁祜箪蓓"
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+" 弼邃耖挈 疬磲赆 赆翎綮摅妁 蓣彘 溟狯锺弭殛 燧沐栾騖n"
+"歪 篚礤鬟簌;"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Allow all users"
-msgstr "硼轸褫疱翎 汩 秕 麸躜 黢摅翦"
+msgid "Which username"
+msgstr "酗唢 镬 黢摅翮"
#: ../../any.pm:1
#, c-format
-msgid "No sharing"
-msgstr "座襁 觑轫 黢摅"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "峨脶"
+msgid "Which type of entry do you want to add?"
+msgstr "蚤 酏痫 屦殡镢 栎脲翦 磲 瘃矬栎箦翦;"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "刘艮 暹磲 痣揆珧 脒篝 豉 溟徼蒹殪 鼯颃"
+msgid "Restore partition table"
+msgstr "硼犴狯锺 疬磲赆 赆翎綮摅妁"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Please choose your country."
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 齄襻 筢."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "彦秕黹"
+msgid "On CUPS server \"%s\""
+msgstr "郁镯 孱躔珩弭玺 CUPS \"%s\""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Country"
-msgstr "襻"
+msgid "Post-install configuration"
+msgstr "氧桁唧彘 戾糗 翮 邈赆糗篝狍"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "All languages"
-msgstr "茧弪 镩 汶箦"
+msgid "Use ``%s'' instead"
+msgstr "遵珞殪镳镩摅翦 ``%s'' 篝 栎箸 麸"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "旭镥痖脲沆蓓 黢摅 Unicode"
+msgid "Type"
+msgstr "札痫"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"燥 Mandrake Linux 躔矬翮襁驽 痫腚狃胼 汶箦.硼殡蓊翦 \n"
-"糸 茈脲 汶箦 痫 栳 暹磲 溟徼蒹殪弪 戾糗 麸 疠襻 翮 \n"
-"邈赆糗篝狍珧 赆 翮 屦犴尻赀礴箸 麸 篚篝揿狒 筢."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose a language to use."
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 汶筢."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "硼殡蓊翦 麸 溟狩彘耖篝 疳襻椠聩 痫 栎脲翦 磲 黢珞殪镳镩摅弭:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "硼殡蓊翦 麸 瘃镥痖脲沆蓓 黢摅翮:"
+"\n"
+"硼唧珧 尻趱瘗糨 痫 蓣秕 聃桁轶翦 戾 狁麇哚 PPD 痫 疳褫黠眙衢 狃 麸躜 "
+"赆翎箨艴狍糨 麸躜 戾 麸痖觑 镤玢稞 CUPS 溴 祓锺稞 磲 戾翎鲥耔稞."
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "容脲翦 磲 黢珞殪镳镩摅弭 狨艮 翮 脲轸秕胥哚;"
+msgid "Sri Lanka"
+msgstr "玉 塑黻"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"甜锺 磲 聃桁唧 麸 簖篝珈 筢 蒴箝 翦 磲 篚礓蒎 狨酎灬翎 蓓犴 黢摅翮."
+" 疳襻贶豉 尻趱瘗艮騖n"
+"\n"
+"%s%s\n"
+"暹磲 莒弩 篚礓屐蓓镩 篝 簖篝珈 筢"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "刘酎灬翮 簖礓弩"
+msgid "Central African Republic"
+msgstr "溺祜犟狒哚 叔眙耖贽 瘤耖贽"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Icon"
-msgstr "砰觑磉溟"
+msgid "Gateway device"
+msgstr "吁箨艴 瘕腌"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Shell"
-msgstr "蛛镩 (shell)"
+msgid "Net Method:"
+msgstr "梯栾滹 溟牯:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "戍溟挈 旭忉箸 (钺碥)"
+msgid "Ethernetcard"
+msgstr "受耵 拈牯 Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Password"
-msgstr "戍溟挈 旭忉箸"
+msgid "Parameters"
+msgstr "嗅褴戾赳镩"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "User name"
-msgstr "柬镬 黢摅翮"
+msgid "Auto-detect"
+msgstr "刘酎灬翮 犴喵礤躞"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Real name"
-msgstr "旭徙灬糸挈 镬"
+msgid "Interface:"
+msgstr "拈屦狯:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Accept user"
-msgstr "琉镤秣 黢摅翮"
+msgid "Select installation class"
+msgstr "硼殡蓊翦 邈赆糗篝狍"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Done"
-msgstr "想镪腌颃桤赍"
+msgid "on CDROM"
+msgstr "篝 CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"砰筌沐翦 黢摅翮\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "旭矬柁赙 黢摅翮"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "刘酎 麸 镬 黢摅翮 躔荞麇 掬"
-
-#: ../../any.pm:1
-#, c-format
-msgid "The user name is too long"
-msgstr "刘酎 麸 镬 黢摅翮 暹磲 痫臊 灬犟"
+"燥 簖篝珈 鲠唔弭衢 磲 扃 暹磲 篚礓屐蓓 篝 拈徜哧趱颸n"
+"旭矬疳柁篝 磲 钺磲聃桁唧弭 翮 簖礓弩 筢."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"燥 犍溟挈 镬 祓锺暹 磲 疱耖蓣彘 禳盹 疱孳 泷莒灬翎, 狁殍祜, `-' 赆 `_'"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "嗅襻赆膻 彘筌沐翦 镬 黢摅翮"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This password is too simple"
-msgstr " 犍溟挈 瘃忉箸 暹磲 痫臊 狃朦"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Please try again"
-msgstr "嗅襻赆膻 瘃矬疳柁篝 钺碥"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "祥 犍溟觑 瘃忉箸 暹磲 犴镩镩"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(麸 %s 蓣彘 掬 瘃矬翦桢)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
+"吁礓蒹翦 麸 尻趱瘗艮 筢 箦 蓓犴 孱躔珩弭玺 Linux 赆 篚礓蒹翦 箦 狨酎 翎 "
+"扃麽磙灬翎 Windows 筢 疱胲翦騖n"
+"\n"
+"容脲翦 瘃徙灬糸贶 磲 篚礤鬟箦翦 糸 聃桁唧彘 麸 尻趱瘗艮 筢 痫 贶礤翦;"
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr "瘃忉箸 箦 羼汜脲哚 溟牯"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr "瘃忉箸 箦 溟狩彘耖篝殛 狁麇哚"
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr "漉磲酎翮翎 \"su\""
-
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "瘃忉箸 箦 羼汜脲哚 rpm"
+msgid "Belarus"
+msgstr "隋蹶锺哚"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "瘃忉箸 箦 瘃镢褴祆狒 "
+msgid "Error writing to file %s"
+msgstr "遇茈灬 邈泷狯掾 篝 狁麇唢 %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"震荞黠蹴 镩 彡秕桢 屦殡镢蒡.\n"
-"甜锺暹翦 磲 瘃矬栎箦翦 觊 茈脲 磲 犭胲铄翦 糸 躔荞黠躞弪."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "峨腼 脲轸秕胥殛 (windows...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "峨腼 脲轸秕胥殛 (MacOS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "峨腼 脲轸秕胥殛 (SunOS...)"
-
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "蚤 酏痫 屦殡镢 栎脲翦 磲 瘃矬栎箦翦;"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "刘艮 弭殛蒴 黢珞殪镳镩暹翎 掬"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a root partition"
-msgstr "旭蒺彘 磲 锺唧弭 扉 赆糗綮珞 root"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "旭蒺彘 磲 锺唧弭 扉 彘挈磲 瘐褶磲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "腻 屦轸褫疱翎 茕彘 弭殛蒴"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "旭镥痖脲沆蓓"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "座襁騐ideo"
+"燥 apmd 疳襻觑腼蹊暹 赆 赆翎泷荟彘 翮 赆糗篝狍 翮 祓狒狁哚.\n"
+"甜锺暹 屦唧珧 磲 黢珞殪镳镩玷暹 汩 麸 狨酎灬麸 觌暹箝祜 麸 篚篝揿狒矧 箦 \n"
+"疱襁痿 麽扃朕 鳇耵轶珧 翮 祓狒狁哚."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Initrd-size"
-msgstr "燧沐栾 Initrd"
+msgid "Use tape to backup"
+msgstr "遵摅 翎轫哚 汩 翎 狁麇哚 狍鲠脲哚"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Append"
-msgstr "旭矬荞翮箸"
+msgid "The following packages are going to be installed"
+msgstr "柔 邈赆翎篝徼稞 翎 疳襻贶豉 疳贻翎"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Label"
-msgstr "鹏殛蒴"
+msgid "CUPS configuration"
+msgstr "妖桁轶 CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "另狍鲠胼"
+msgid "Hong Kong"
+msgstr "罪磴 曙磴"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Table"
-msgstr "羞磲赆"
+msgid "Not enough free space to allocate new partitions"
+msgstr "腻 躔荞麇 狁赍酎 咫妪桢耧 齄耧 汩 溏扉秕胥哚 磔 赆翎綮摅妁"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Root"
-msgstr "Root"
+msgid "Moving"
+msgstr "体翎赀礴箸 箦 孱蓦轭"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Read-write"
-msgstr "Read-write"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"鸟狍翮耖玺弪 Drakbackup 燧簌 %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "("
+msgstr "("
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Video mode"
-msgstr "另茈躞 镨珧"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"梳膻 揠栳翦 篝镯 箱玢 妖桁轶珧 拈牯鮘n"
+"\n"
+"胚灬篝 蒴镩祜 磲 聃桁唧秕戾 翮 簖礓弩 筢 篝 溟徜哧趱/溥牯躏.\n"
+"另 溴 栎脲翦 磲 黢珞殪镳镩摅弭 翮 狨酎灬翮 犴喵礤躞, 狃镥痖胼铘 麸 "
+"觑豸荜.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Image"
-msgstr "砰挈磲"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "蓬 锺轶祜 脲轸秕胥殛;"
+msgid "Lebanon"
+msgstr "诉忉盹"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "彭羼泔痫哏箸 OF 尻赀礴箸;"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "彭羼泔痫哏箸 尻赀礴箸 狃 CD;"
+msgid "Stop"
+msgstr "藻耢狒轶禳"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "暂腼 遵秕 抨赀礴箸 絮褶磲"
+msgid "Edit selected host"
+msgstr "硼孱羼汜筮 屦殡邈燧盹 躔镫镢轶艮"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "俄镩沆 梳桴篝蓠珞珧 Firmware"
+msgid "No CD device defined!"
+msgstr "腻 赆栾襁篝珀 篚箨艴 CD"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Boot device"
-msgstr "吁箨艴 尻赀礴箸"
+msgid "Bulgarian (phonetic)"
+msgstr "嘛蹼汜耖挈 (鳄礴糸挈)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Init Message"
-msgstr "剔眭灬 Init"
+msgid "The DHCP start ip"
+msgstr " IP 尻赀礴箸 麸 DHCP"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "遵摅 瘃镢褴祆狒矧 尻赀礴箸"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "箩箝贻 屦殡镢蒡 瘃镢褴祆狒矧 尻赀礴箸"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-" 屦殡镢 ``琉徙艴箸 屦殡镢 泷犰燹 屙麸朕'' 暹磲 荀耒篝 鼯襁 犍溟挈 "
-"瘃忉箸"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "砰筌沐翦 燧沐栾 祉揿珧 箦 MB"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "彭羼泔痫哏箸 痫腚狃膻 瘃秭唠"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "陵耖廪 痫簏翮翎 祉揿珧 犴 黢彘苕弭衢 (屙麸疬篝珀犴 %d MB)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "梳栳耖箪 /tmp 箦 贶桢 尻赀礴箸"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "拈箨蒴 尻赀礴箸"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "restrict"
-msgstr "狃徙艴箸"
+msgid "Tape"
+msgstr "葬轫哚"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "琉徙艴箸 屦殡镢 泷犰燹 屙麸朕"
+msgid "Scanning network..."
+msgstr "另徭摁珞 篝 溥牯躏..."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Force No APIC"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
+"体 狨艮 翮 屦殡镢 栳 祓锺暹翦 磲 屦犴狯蓠弭 镳镩徜摒雉錦n"
+"蓐滹箸 麸 赆翎朦泔 /etc."
-#: ../../any.pm:1
-#, c-format
-msgid "Enable ACPI"
-msgstr "彭羼泔痫哏箸 ACPI"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "梳桴篝蓠珞 瘃轫 翮 尻赀礴箸"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "篚祓徙掾"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "吁祓徙掾"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "旭襻祆 尻赀礴箸"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "旭矧 麸燧狎 翮 赆糗綮珞珧 尻赀礴箸"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "旭矧 麸燧狎 麸 溥箨秕 (MBR)"
-
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "酗 栎脲翦 磲 邈赆翎篝摅弭 麸 瘃襻祆 尻赀礴箸;"
+msgid "Malaysia"
+msgstr "提脶轶哚"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "陪赆糗篝狍 LILO/grub"
+msgid "Swiss (French layout)"
+msgstr "烹忮糸挈 (冕腚殛 溟荇犷)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "陪赆糗篝狍 SILO"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "狃雉貅哚 mkraid (燹瘗 狃秕箝苕秕 翎 raidtools;)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Skip"
-msgstr "嗅褴脲轼"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "On Floppy"
-msgstr "郁珥 拈箨蒴"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "梯沐栾 翮 (溴豸蓠秕 屦轲蒌秕) cpu cache"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "旭矧 麸燧狎 翮 赆糗綮珞珧 尻赀礴箸"
+msgid "Soundcard"
+msgstr "受耵 搠秕"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"硼殡蓊狒 磲 邈赆翎篝摅弭 麸 瘃襻祆 尻赀礴箸 箦 扉 赆糗綮珞.\n"
-"彭盹暹翦  蓣弭 掬 邈赆糗篝狍 蓓 茈腼 瘃襻祆 尻赀礴箸 篝镯 箨腌顸 "
-"筢 溥箨 (.. System Commander).\n"
-"\n"
-"琉 痫辄 溥箨 铄觊碥翦;"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "溺扉秕胥哚 溥箨秕 尻赀礴箸..."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "砰筌沐翦 溟箨蒴 篝镯 镤玢 %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "硼殡蓊翦 镤玢 溟箨蒴狎 汩 溏扉秕胥哚 溟箨蒴狎 尻赀礴箸"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "腻羼矧 镤玢 溟箨蒴狎"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "旭矧 镤玢 溟箨蒴狎"
+"瞄 磲 尻趱瘙箦翦 狃 翮 泷犰燹 屙麸膻 (疳褴桴耧 翦耢狒殛稞) 贶眙 黢摅 "
+"翮 屙麸朕 \"%s <狁麇唢>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "缩疖灬, 溴 躔荞麇 溟徼蒹殪矧 镤玢 溟箨蒴狎"
+msgid "Level %s\n"
+msgstr "硼唣邃 %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"涕 瘃矬狁祜箪蓓 溟箨蒴 尻赀礴箸 筢 溥礤 翮 漉磲酎翮翎 磲 尻觊磙箦翦\n"
-"麸 簖篝珈 筢 鼯襁 翮 黢摅 麸 瘃镢褴祆狒矧 尻赀礴箸. 刘酎 暹磲 "
-"黢摅殪 遘 溴 栎脲翦\n"
-"磲 邈赆翎篝摅弭 麸 LILO ( 麸 grub), 遘 贶痫轱 茈腼 脲轸秕胥殛 "
-"赆翎篝褫 麸 LILO\n"
-" 遘 镩 聃桁唧彘 筢 溴 屦轸褫痫蹴 翮 黢摅 LILO. 刘艮 溟箨蒴 祓锺暹\n"
-"屦唧珧 磲 黢珞殪镳镩玷暹 箦 篚礓踽箪 戾 翮 溟箨蒴 溟荏珧 麸 Mandrake,\n"
-"贶盹眙狎 艴觑朦翦耒 翮 屦犴狯锺 麸 篚篝揿狒矧 戾糗 狃 箫忉褶 怆茆.\n"
-"容脲翦 磲 溏扉秕胥摅弭 溟箨蒴 尻赀礴箸;\n"
-"%s"
+msgid "Luxembourg"
+msgstr "孙躅屐怙泔"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
+" DrakBackup Daemon Report\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
"\n"
+msgstr ""
"\n"
-"(旭矬秣!:受礤翦 黢摅 麸 XFS 篝珥 赆糗綮珞 root\n"
-" 溏扉秕胥哚 溟箨蒴 尻赀礴箸 戾爿栾躜 1.44 Mb 燔腚镯 栳 狃雉彘,\n"
-"屦彘滢 麸 XFS 黢彘苕弭衢 痫臊 戾丬腼躜 镤玢稞.)"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+" 尼哽镯狎 犴狯锺茯 DrakBackup \n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"涕 瘃矬狁祜箪蓓 溟箨蒴 尻赀礴箸 筢 溥礤 翮 漉磲酎翮翎 磲 尻觊磙箦翦\n"
-"麸 簖篝珈 筢 鼯襁 翮 黢摅 麸 瘃镢褴祆狒矧 尻赀礴箸. 刘酎 暹磲 "
-"黢摅殪 遘 溴 栎脲翦\n"
-"磲 邈赆翎篝摅弭 麸 SILO , 遘 贶痫轱 茈腼 脲轸秕胥殛 赆翎篝褫 麸 "
-"SILO 遘 镩 \n"
-"聃桁唧彘 筢 溴 屦轸褫痫蹴 翮 黢摅 SILO. 刘艮 溟箨蒴 祓锺暹 屦唧珧 磲 "
-"黢珞殪镳镩玷暹 箦\n"
-" 篚礓踽箪 戾 翮 溟箨蒴 溟荏珧 麸 Mandrake, 贶盹眙狎 艴觑朦翦耒 翮 "
-"屦犴狯锺 麸 篚篝揿狒矧 戾糗 狃 箫忉褶 怆茆.\n"
"\n"
-"另 栎脲翦 磲 溏扉秕胥摅弭 扉 糨麸獒 溟箨蒴 彘筌沐翦 扉 赍磙 溟箨蒴 篝镯 "
-"镤玢黒n"
-"溟箨蒴狎 赆 疳艮篝 \"彭糗铄閈"."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "腻 祓锺暹翦 磲 邈赆翎篝摅弭 麸 瘃襻祆 尻赀礴箸 箦 赆糗綮珞 %s\n"
+msgid "Iran"
+msgstr "神茼"
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "溴 躔荞麇 狁赍酎 齄耧 篝 /boot"
+msgid "Bus"
+msgstr "Bus"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+msgid "Iraq"
+msgstr "神荜"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "虚栳磙 溟痣掾 溟妪桴眢珧 LAN 篝珥 赳蓣秕筢 颀桁轶 麸 %s!\n"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+msgid "Configuring..."
+msgstr "妖桁轶..."
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+msgid "The setup has already been done, and it's currently enabled."
+msgstr " 颀桁轶 蓣彘 掬 氵礤, 赆 狨艮 翮 篝殂燹 暹磲 屙羼泔痫殓燧礴."
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Linux\n"
+" 戾糗 膺狎."
-#: ../../bootloader.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Password (again)"
+msgstr "戍溟挈 旭忉箸 (钺碥)"
-#: ../../bootloader.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Search installed fonts"
+msgstr "另徭摁珞 邈赆翦篝珈蓓 泷犰灬麸箦轳"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO 戾 戾盹 赍殪蓓秕"
+msgid "Venezuela"
+msgstr "洛礤骘踺脶"
-#: ../../bootloader.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO 戾 泷狯殛 戾盹"
+msgid "IP address"
+msgstr "拈妪桴眢 IP"
-#: ../../bootloader.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Choose the sizes"
+msgstr "硼殡蓊翦 翎 戾爿桤"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"List of data corrupted:\n"
"\n"
msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
+"诉篝 豉 赆翦篝襻祆蓓 溴滹燧睐:\n"
"\n"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr "麸 consolehelper 脲唣彘"
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "麸 kdesu 脲唣彘"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "葬 篝殂扉躔 栳 暹磲 溟徼蒹殪 戾糗 翮 邈赆糗篝狍珧 篝 %s"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "龄狒 朕 篝殂扉雉 瘃轫 狃 翮 溏扉秕胥哚 赆翎綮摅妁"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d 溴豸羼屦翎"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 脲痿"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d 脲痿"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "..."
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Austria"
-msgstr "刘篝襁"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Italy"
-msgstr "婶犭哚"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "想脶礓哚"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Sweden"
-msgstr "语蹒溥"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Norway"
-msgstr "惋疋玢哚"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Greece"
-msgstr "烹胲溽"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "缅耢犴哚"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Czech Republic"
-msgstr "泽蓣殛 溺祜犟狒哚"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Belgium"
-msgstr "螺脬轱"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "冕腚哚"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Costa Rica"
-msgstr "庶篝 堰赆"
-
-#: ../../fsedit.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "遇茈灬 赆糗 麸 茼镩沆 麸 %s 汩 邈泷狯: %s"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"燥 禳眙屐 筢 溴 躔矬翮襁驽翎 狃 麸 簖篝珈.\n"
+"堰铘 扉 灬糸 篝 http://www.linmodems.org"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "梳爝 屙蓠沐獒 瘃矧 尻糨脲箸"
+msgid "Choose another partition"
+msgstr "硼殡蓊翦 茈腌 赆糗綮珞"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"腻 躔荞麇 狁赍酎 咫妪桢耧 齄耧 汩 翮 狨酎灬翮 溏扉秕胥哚 磔 "
-"赆翎綮摅妁"
+msgid "Current user"
+msgstr "择蓣镯 黢摅翮"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 犟躔麸泷狯珈蓓 簖篝珈 狁麇啭 汩 "
-"瘃矬荞翮箸 %s"
+msgid "Username"
+msgstr "柬镬 黢摅翮"
-#: ../../fsedit.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"遵彘苕弩翦 蓓 瘃徙灬糸挈 簖篝珈 狁麇啭 (ext2/ext3, reiserfs, xfs, or jfs) "
-"汩 狨酎 麸 箸戾唢 簖礓弩珧\n"
+msgid "Left \"Windows\" key"
+msgstr "榴轶翦顸 痣揸赳 \"Windows\""
-#: ../../fsedit.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"刘酎 赆糗腼泔 瘃蒺彘 磲 疳襻戾唔彘 篝 耖骈挈 簖篝珈 狁麇啭 (root)"
+msgid "dhcpd Server Configuration"
+msgstr "氧桁唧彘 蓬躔珩弭玺 dhcpd"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 扉 赆糗綮珞 LVM 汩 瘃矬荞翮箸 %s"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-"\n"
-" 槛閈n"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "震荞麇 掬 赆糗綮珞 戾 箸戾唢 簖礓弩珧 %s\n"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"燥 镬 麸 尻趱瘗艮 瘃蒺彘 磲 疱耖蓣彘 禳盹 泷莒灬翎, 狁殍祜 赆 麸 "
-"麽襻牯揆 underscore"
+msgid "Guyana"
+msgstr "蔑蹰茼"
-#: ../../fsedit.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "燥 箸戾唢 簖礓弩珧 瘃蒺彘 磲 铄觊碥彘 戾 /"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "篝镯 孱躔珩弭玺 Novell \"%s\", 篝镯 尻趱瘗艮 \"%s\""
-#: ../../fsedit.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 麸 ReiserFS 汩 赆翎綮摅彘 扉犟羼弪 狃 "
-"32MB"
+msgid "Remove a module"
+msgstr "琉镬荜聃眢 狁桉狒矧"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 麸 JFS 汩 赆翎綮摅彘 扉犟羼弪 狃 16MB"
+msgid "Password"
+msgstr "戍溟挈 旭忉箸"
-#: ../../fsedit.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"Do you agree to loose all the partitions?\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"腻 祓锺 磲 溟徕荏 麸 疬磲赆 赆翎綮摅妁 翮 篚箨艴掾 %s,, 暹磲 痫臊\n"
-"赆翦篝襻祆蓓矧 :( 柔 瘃矬疳柁簌 磲 篚礤鬟簌 狯衢颃眙狎 糸 脶龛狍燧礤 \n"
-"赆翎綮摅彘 (纤 粤 呐南膛土 栳 麽栾!). 茈腌 屦殡镢 筢 暹磲 磲\n"
-"扃 屦轸褫翦 篝 DrakX 磲 徙氵铄 麸 疬磲赆 赆翎綮摅妁. \n"
-"燥 篥茈灬 暹磲: %s\n"
-"\n"
-"吁祧暹翦 磲 溟徙襻鲲 弪 镩 赆翎綮摅彘;\n"
-
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "遇茈灬"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "孱躔珩弭玺掾"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "戾 /usr"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "狃朦"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "彭羼泔痫哏箸 赆糗綮珞珧 swap %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "篥茈灬 赆糗 翮 狃矬溴箸 麸 %s: %s"
+msgid "Advanced Configuration"
+msgstr "旭秣珈蓓弪 氧桁唧彘"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr " 簖礓弩 翮 赆糗綮珞珧 %s 篝镯 赆糗腼泔 %s 狃蒴貅"
+msgid "Scanning on your HP multi-function device"
+msgstr "榆聩箸 篝 痫膈黢珞糸贽 篚箨艴 HP 痫 溟徼蒴弭"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "旭矬荞翮箸 赆糗綮珞珧 %s"
+msgid "Root"
+msgstr "Root"
-#: ../../fs.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Checking %s"
-msgstr "鸽邈黠 %s"
+msgid "Choose an existing RAID to add to"
+msgstr "硼殡蓊翦 蓓 躔荞黠 RAID 篝 镳镞 栳 氵礤 瘃矬柁赙"
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "田聆镳镞珞 赆糗綮珞珧 %s"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "燥躐觊挈 (祜眙蓠盹 \"Q\" 祜眙蓦)"
-#: ../../fs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "溺扉秕胥哚 赆 祜聆镳镞珞 狁麇唢 %s"
+msgid "Lilo message not found"
+msgstr "腻 怦蓁珀 麸 燹眭灬 lilo"
-#: ../../fs.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "溴 钶聩 瘙 磲 祜聆镳镩摅 麸 %s 箦 酏痫 %s"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"刘酎灬翮 疳襻泫戕 翮 屦殛弼犭咪狎 麸 瘐褶磲 篝 /boot 汩 麸\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../fs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s 祜聆镳镞珞 麸 %s 狃蒴貅"
+msgid "if needed"
+msgstr "犴 黢彘苕弭衢"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"受眙 觌殛 篝 \"硼屙 ->\" 遘 栎脲翦 磲 溟徙褴翦  翎 溴滹燧磲\n"
-"糸 赆翎綮摅彘 痫 怦唧觑眙衢 篝镯 箨腌顸 筢 溥箨. 旭矬秣 戾糗\n"
-"痫 栳 觌殛 篝 \"硼屙 ->\"溴 栳 祓锺暹翦 磲 犴彡艮箦翦 翎 溴滹燧磲\n"
-"赆 糸 赆翎綮摅彘 痫 怦唧觑眙衢 篝镯 溥箨 灬孢 赆 翎 Windows\n"
-" 硼屙颸n"
-"\n"
-"受眙 觌殛 篝 \"<- 旭镧泔屙颸" 汩 磲 翦耢狒唧弭 翮 脲轸秕胥哚 狨艮\n"
-"鼯襁 磲 鬈箦翦 翎 溴滹燧磲 赆 糸 赆翎綮摅彘 筢 篝 溥箨."
+msgid "Restore Failed..."
+msgstr " 硼犴狯锺 琉蒴貅..."
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"硼殡蓊翦 麸 溥箨 痫 栎脲翦 磲 溟徙褴翦 汩 磲 邈赆翎篝摅弭 \n"
-"翮 磔 赆糗綮珞 Mandrake Linux. 醒嫌献: 茧 翎 溴滹燧磲 栳 溟徙襻鲲\n"
-"赆 栳 暹磲 徜狒 屦犴狯锺 麸躜!"
+msgid "/Autodetect _jazz drives"
+msgstr "/彭麸痖箪 _镤玢 jazz"
-#: ../../help.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
+"Description:\n"
"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
msgstr ""
-"犴轺礤珀錦n"
-"\n"
-"\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
+"绣耖泷狯轡n"
"\n"
-"Yaboot's main options are:\n"
+" Drakbackup\n"
"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
+" 育篝珈醆n"
+" 遵摅翦騖n"
+" 峨腼\n"
+" 茧 峨腼 燥燧狎 Windows \n"
"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
+" Drakbackup\n"
"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
+" CDROM\n"
"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot\n"
-" Linux\n"
-" 犴轺礤珀錦n"
"\n"
"\n"
"\n"
-" Yaboot\n"
-"\n"
-" 狃朦\n"
+" Drakbackup\n"
+" 黢摅翮騖n"
"\n"
-" Root\n"
-" Linux\n"
+" 孱' 锺轶祜齖n"
"\n"
"\n"
+" 妖桁轶鏫n"
"\n"
"\n"
-" Linux\n"
+" 硼犴狯锺躙n"
"\n"
-" Root\n"
-" Linux\n"
-" 孱' 锺轶祜齖n"
"\n"
-" Root\n"
"\n"
"\n"
-" Root\n"
"\n"
"\n"
-" 旭镥痖脲沆蓓 孱' 锺轶祜齖n"
-"."
-#: ../../help.pm:1
+#: ../../install_messages.pm:1
#, fuzzy, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
+"Introduction\n"
"\n"
-"For Linux, there are a few possible options:\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
+"1. License Agreement\n"
"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
+"2. Limited Warranty\n"
"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"3. The GPL License and Related Licenses\n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
"\n"
"\n"
+"4. Intellectual Property Rights\n"
"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
"\n"
"\n"
+"5. Governing Laws \n"
"\n"
-" Linux\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
"\n"
-" 鹏殛蒴醆n"
"\n"
+" Linux\n"
"\n"
-" 砰挈磲\n"
"\n"
+" Linux\n"
"\n"
-" Root 篚箨艴 Linux\n"
"\n"
+" 朵彘醆n"
"\n"
-" 屙羼泔痫哏箸\n"
"\n"
"\n"
"\n"
+" 朵彘醆n"
+" 朵彘醆n"
"\n"
"\n"
+" 朵彘醆n"
+" 朵彘 朵彘醆n"
"\n"
"\n"
"\n"
-" Initrd\n"
-" 篚箨艴轡n"
"\n"
"\n"
-" Initrd 孱' 锺轶祜齖n"
"\n"
-" 孱' 锺轶祜齖n"
"\n"
"\n"
"\n"
-" 孱' 锺轶祜齖n"
"\n"
-" 座襁騐ideo\n"
"\n"
"\n"
"\n"
-" 旭镥痖脲沆蓓 孱' 锺轶祜 Linux\n"
"\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"IDE\n"
-" PCI\n"
"\n"
"\n"
"\n"
-" PCI 歪閈n"
-" 槛閈n"
"\n"
-" 犴轺礤珀錦n"
-" 硼屙 硼屙颸n"
+" Linux\n"
"\n"
"\n"
-" PCI\n"
"\n"
"\n"
+" 朵彘醆n"
"\n"
"\n"
+" 缅黹贶\n"
"\n"
"\n"
"\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
+" 朵彘 藻觎珩啭箸\n"
"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"峨腼\n"
-" Linux\n"
"\n"
"\n"
+" 三襻\n"
"\n"
+" 茧醆n"
"\n"
"\n"
-" 狃朦\n"
"\n"
" Linux\n"
"\n"
-" CUPS 抨酏瘗箸 育篝珈醆n"
-"\n"
-" 狃朦 孱躔珩弭玺掾\n"
"\n"
"\n"
-" 孱躔珩弭玺掾\n"
-" CUPS\n"
"\n"
"\n"
"\n"
"\n"
-" 尻翦脲唪衢\n"
-"."
+" 朵彘 冕腚哚\n"
+" 茧醆n"
+" 冕腚哚\n"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
+"篚眙弭徙燧礴 y 翮 泷犰燹 瘃稂滹鮘n"
+"狃 翮 屦茼 狁轶翦褶 泫磉"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 旭矬柁赙 磔颸n"
-" 择镳镳镞珞 诉篝 瘤徇皴箸 彭糗铄閈n"
-"\n"
-"\n"
-"\n"
-" 拈徙襻鲛\n"
-"\n"
-"\n"
-"!"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Current interface configuration"
+msgstr "妖桁轶 赳蓣秕筢 溟屦狯掾"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
"\n"
+"跑 蓣弭 ISA 贶耵, 镩 糸燧 篝珥 屦屙 镨 栳 瘃蒺彘 磲 暹磲 簌篝蒡.\n"
"\n"
-" 遵摅 瘃镢褴祆狒矧 尻赀礴箸騖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Root 篚箨艴 孱' 锺轶祜齖n"
-"\n"
-"\n"
-"\n"
-" 孱' 锺轶祜齖n"
-" 黢摅翮騖n"
-" 孱' 锺轶祜齖n"
-"\n"
-"\n"
-" 嗅褴脲轼 Linux\n"
-"\n"
-"\n"
-" 瞄 旭秣珈蓓秕騖n"
-" 黢摅翮."
+"跑 蓣弭 PCMCIA 贶耵, 瘃蒺彘 磲 钶皴翦 麸 irq 赆 麸 io 翮 贶耵狎 筢.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Do not print any test page"
+msgstr "座襁 尻酏瘗箸 滹觊灬篝殛掾 箦脒溽"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 翮 赆糗腚珉 椠襻. 瞄 疳褴溴殂灬,\n"
-"鏫"COM1\" 篝 Windows 镯镬苕弭衢 \"ttyS0\" 篝 GNU/Linux."
+msgid "Gurmukhi"
+msgstr "藐秕耢稞觊"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+#: ../../any.pm:1
+#, c-format
+msgid "Force No APIC"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 箦轳獒挈\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱' 锺轶祜齖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 体 耧滠觊 犴轺礤珀錦n"
-"\n"
-"\n"
-" 硼屙颸n"
-" 屙羼泔痫哏箸 酤襻\n"
-"\n"
-"\n"
-"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" 瞄 旭秣珈蓓秕騖n"
-"\n"
-"\n"
-" 审疳磉醆n"
-" 孱' 锺轶祜 瞄 旭秣珈蓓秕騖n"
-"\n"
-"\n"
-"\n"
-" 硼屙颸n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 黢摅翮騖n"
-" 黢摅翮."
+"刘酎 犍溟挈 瘃忉箸 暹磲 痫臊 狃朦 (瘃蒺彘 磲 蓣彘 麸蹼荀轶麸 %d "
+"麽襻牯揆弪)"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"孱' 锺轶祜齖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 峨脶\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
+#: ../../standalone.pm:1
+#, c-format
+msgid "[keyboard]"
+msgstr "[痣珀赳镫轱]"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"屙羼泔痫哏箸 酤襻 Linux\n"
-"\n"
-"\n"
-" 磔颸n"
-" Linux\n"
-"\n"
-" 陪赆糗篝狍鏫n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 另徕荑扉箸\n"
-" Linux\n"
-" 黢摅翮騖n"
-"\n"
-"\n"
-" 另徕荑扉箸 Linux\n"
-" 尻翦脲唪衢 另徕荑扉箸\n"
-" Linux."
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Install List"
+msgstr "诉篝 陪赆糗篝狍珧"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+"Change\n"
+"Restore Path"
msgstr ""
-"\"襻\": 咫葶铘 翮 屦殡镢 齄襻. 另 溴 暹篝 箦 狨艮 翮 齄襻,\n"
-"贶眙 觌殛 篝 痣揸赳 赆 屦殡蓊翦 扉 茈腌."
+"岭脶戕\n"
+"容箸 硼犴狯锺茯"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
+msgid "Show only for the selected day"
+msgstr "澎鲕黹箸 禳盹 汩 翮 屦殡邈燧礴 珈蓠"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
msgstr ""
-"绣耖篌羼弪 豉 爝 赆翎綮摅彘 Windows 怦蓁珀犴 篝镯 溥箨 筢. 嗅襻赆膻 \n"
-"屦殡蓊翦 痫獒 栎脲翦 磲 篚耨殛睨箦翦 汩 磲 邈赆翎篝摅弭 麸 Mandrake "
-"Linux.\n"
-"\n"
-"受桢 赆糗綮珞 犴狯蓠弭衢 : \"柬镬 Linux\", \"柬镬 Windows\"\n"
-"\"座耒糸挈翮翎\".\n"
-"\n"
-"燥 镬 Linux 箸灬唔彘 翎 孱掾: \"札痫 溥箨秕\",\"狁殍禳 溥箨秕\",\n"
-"\"狁殍禳 赆糗綮珞珧 汩 疳褴溴殂灬, \"hda1\").\n"
-"\n"
-" \"札痫 溥箨秕\" 暹磲 \"hd\" 遘 瘃彘翎 汩 溥箨 IDE 赆 \"sd\" \n"
-"汩 SCSI 溥箨.\n"
-"\n"
-" \" 狁殍禳 溥箨秕\"暹磲 疖眙 蓓 泷莒灬 戾糗 麸 \"hd\" \"sd\". 瞄醆n"
-"麸躜 IDE 溥箨秕: \n"
"\n"
-" * \"a\" 暹磲 \"master 溥箨矧 篝镯 瘃 咫邈牯 IDE\",\n"
"\n"
-" * \"b\" 暹磲 \"slave 溥箨矧 篝镯 瘃 咫邈牯 IDE\",\n"
+" 溺扉秕胥哚 Root\n"
"\n"
-" * \"c\" 暹磲 \"master 溥箨矧 篝镯 溴羼 咫邈牯 IDE\",\n"
"\n"
-" * \"d\" 暹磲 \"slave 溥箨矧 篝镯 溴羼 咫邈牯 IDE\".\n"
"\n"
-"瞄 溥箨秕 SCSI, \"a\" 暹磲 瘃矧 溥箨矧, \"b\" 暹磲 溴羼矧 "
-"溥箨矧\n"
-" 觌...\n"
"\n"
-"燥 \"柬镬 Windows\" 暹磲 麸 泷莒灬 翮 赆糗綮珞珧  鲠唔弭衢 狃 翎\n"
-"Windows ( 瘃矧 溥箨矧 赆糗綮珞 胼沐翎 \"C:\")."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
-"To partition the selected hard drive, you can use these options:\n"
"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
+" PCI\n"
"\n"
-"\"More\": gives access to additional features:\n"
"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
-"When a partition is selected, you can use:\n"
"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
-" * Ctrl-d to delete a partition\n"
"\n"
-" * Ctrl-m to set the mount point\n"
"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
+" 孱躔珩弭玺掾\n"
"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+" 育篝珈醆n"
+" 屙羼泔痫哏箸\n"
"\n"
-" Linux\n"
-" Linux\n"
"\n"
+" 孱躔珩弭玺掾\n"
"\n"
"\n"
"\n"
-" IDE\n"
"\n"
"\n"
"\n"
@@ -1958,472 +1150,248 @@ msgstr ""
"\n"
"\n"
"\n"
-" 峨脶\n"
"\n"
-" 琉镨揸艴箸\n"
"\n"
"\n"
"\n"
-" 硼犴狯锺躙n"
"\n"
"\n"
"\n"
+" 孱躔珩弭玺掾\n"
"\n"
"\n"
"\n"
"\n"
+" 孱躔珩弭玺掾\n"
"\n"
"\n"
-" 戾糗 膺狎\n"
"\n"
"\n"
"\n"
-" 箱玢\n"
"\n"
"\n"
"\n"
-" 另徇皴箸\n"
-"\n"
"\n"
"\n"
"\n"
"\n"
-" 想镪腌颃桤赍\n"
+" 狃屙羼泔痫哏箸\n"
"\n"
"\n"
-" 悬翦\n"
"\n"
+" 黢摅翮騖n"
+" 孱躔珩弭玺掾\n"
+" 孱躔珩弭玺掾\n"
"\n"
"\n"
-" 想镪腌颃桤赍\n"
-"\n"
-" 悬翦\n"
+" 孱' 锺轶祜 狃屙羼泔痫哏箸\n"
+" 栎箸\n"
"\n"
-" 磔颸n"
"\n"
-" 拈徙襻鲛\n"
+" 溺扉秕胥哚\n"
"\n"
"\n"
"\n"
"\n"
"\n"
"\n"
-" HFS\n"
"\n"
"\n"
"\n"
-"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "512 kB"
+msgstr "512 kB"
+
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Logs"
+msgstr "庆羼镫獒"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-"屦唣邃颸n"
-" 屦唣邃颸n"
-"\n"
-" 拈徜哧趱 屦唣邃颸n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱' 锺轶祜."
+"(隅戾啭箸: 郁轵 疳褴腚珉弪 椠皴 溴 祓锺暹 磲 氵礤 狨酎灬麸 屙麸痖箪)"
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>N"
+msgstr "<control>N"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind of card do you have?"
+msgstr "蚤 暹滹躜 贶耵狎 蓣弭;"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>O"
+msgstr "<control>O"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "馏鲕脲獒"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Linux\n"
-"\n"
-"\n"
-" 拈徜哧趱颸n"
-" 歪 拈徜哧趱 槛閈n"
-"\n"
-"\n"
-" 歪閈n"
"\n"
-" 陪赆糗篝狍鏫n"
-" 蛾躐."
+" 抨趱瘗艮"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown"
+msgstr "躲睐篝"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 硼屙颸n"
-"\n"
-" 旭镧泔屙颸n"
-" 磔 Linux\n"
-"\n"
-" 瞄 旭秣珈蓓秕騖n"
-"."
+"O 孱躔珩弭玺掾 暹磲 掬 篝 脒篝, 溴 祓锺暹翦 磲 麸 瘃矬栎箦翦 钺碥.\n"
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "氧桁唧彘 溟牯"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
+#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Linux\n"
-" 硼屙颸n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 瞄 旭秣珈蓓秕騖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 硼犴狯豉箸\n"
-"\n"
-"\n"
-" 刘酎灬麸\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 琉镨揸艴箸\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
+"旭镫腼 躔镩痫 挈箪秕\n"
+" 鼯襁 D-Channel (扉箬蓓弪 泷犰燧)"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr " 屦殡镢 %s 瘃蒺彘 磲 暹磲 狁殍禳!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "隅戾啭箸"
+
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
+"Arguments: (arg)\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" Activate/Disable daily security check."
msgstr ""
"\n"
-" Linux\n"
-"\n"
-"\n"
-" 磔颸n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 黢摅翮騖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 犴轺礤珀錦n"
-" Linux\n"
-"\n"
-" 孱' 锺轶祜齖n"
-"\n"
-"\n"
-" 燥燧狎 Windows 燥燧狎 Windows \n"
-"\n"
-" Linux 拈徙襻鲛\n"
-" 燥燧狎 Windows \n"
-" 燥燧狎 Windows 岭脶戕 戾爿栾躜\n"
-"\n"
-" 燥燧狎 Windows \n"
-"\n"
-" Linux 燥燧狎 Windows \n"
-"\n"
-"\n"
-" 燥燧狎 Windows \n"
-"\n"
-" 燥燧狎 Windows 磔颸n"
-"\n"
-" 拈徙襻鲛\n"
-" 磔 Linux\n"
-"\n"
-"\n"
"\n"
-"\n"
-"\n"
-" 诉篝 瘤徇皴箸 燥燧狎 Windows \n"
-" 茧醆n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 旭矬狁祜箪蓓颸n"
-"\n"
-"\n"
-" 想镪腌颃桤赍\n"
-"\n"
-"\n"
-"."
+" 赆桤戾耖碥."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"\n"
+"Arguments: (arg)\n"
"\n"
-" 槛閈n"
-" 孱躔珩弭玺掾\n"
-"."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
msgstr ""
-"\n"
-" 孱躔珩弭玺掾\n"
-"."
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "腻 蓣弭 聃桁唧彘 麸 . 胚篝 廨忉轱  栎脲翦 磲 麸 贶礤翦;"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"另茈躞鏫n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr "犴轺礤珀."
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "蚤 酏痫 赆糗綮珞珧;"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"翔鏫n"
-"\n"
-"\n"
-"\n"
-"."
+"狃矬麸朕 脒篝狎 狁麇啭 燧簌 FTP: %s\n"
+" "
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "拈屦狯"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
+" - Backup User Files: \n"
"\n"
-"Test\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+" - Backup Other Files: \n"
"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"Options\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
msgstr ""
-"育篝珈 Linux\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
"\n"
"\n"
"\n"
@@ -2431,32 +1399,25 @@ msgstr ""
"\n"
"\n"
"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 翔鏫n"
-"\n"
"\n"
+" 响茕 羼汜筮狎:\n"
"\n"
"\n"
+" 遵摅翮騖n"
"\n"
"\n"
"\n"
-" 另茈躞鏫n"
"\n"
"\n"
"\n"
+" 峨腼\n"
"\n"
"\n"
"\n"
"\n"
"\n"
-" 娘觊燹\n"
"\n"
"\n"
-" 歪閈n"
"\n"
"\n"
"\n"
@@ -2464,445 +1425,125 @@ msgstr ""
"\n"
"\n"
"\n"
-" 硼殡镢蒡\n"
"\n"
"\n"
"\n"
-" 槛 孱躔珩弭玺掾\n"
-"."
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
"\n"
"\n"
"\n"
"\n"
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"."
+" 篚箨艴."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated strings"
msgstr ""
-"Linux\n"
-"\n"
-"\n"
-" HardDrake Linux\n"
-"\n"
-" 燥燧狎 Windows \n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾 拈徜哧趱颸n"
-" 拈徜哧趱颸n"
-" 孱躔珩弭玺掾\n"
-" 孱躔珩弭玺掾."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "These are the machines from which the scanners should be used:"
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱' 锺轶祜齖n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"!"
+"刘糗 暹磲 翎 扃麽磙灬翎 狃 秕 镩 筢聩糨 栳 瘃蒺彘 磲 黢珞殪镳镩玷稞:"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"抨趱瘗艮 槛 抨趱瘗艮騖n"
-"\n"
-" 磔颸n"
-"."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Messages"
+msgstr "嚏睚灬翎"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
-"拈徜哧趱颸n"
-" 拈徜哧趱 硼屙颸n"
-" Linux\n"
-"\n"
-"\n"
-" 蛾躐颸n"
-"\n"
-" 悬翦\n"
-"\n"
-" 狃朦\n"
-"\n"
-"\n"
-" 孱' 锺轶祜齖n"
-" 拈徜哧趱颸n"
-"\n"
-" 拈徜哧趱颸n"
-"\n"
-"."
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "躲睐篝飢CPH06X (bt878) [痫腚镞 赆翎箨艴狍糨騗"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-" 响茕 羼汜筮狎:\n"
-"\n"
-" 孱' 锺轶祜 Linux\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-" 槛 歪閈n"
-"\n"
-" 孱' 锺轶祜齖n"
-"\n"
-" 狃屙羼泔痫哏箸\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "POP and IMAP Server"
+msgstr "蓬躔珩弭玺掾 POP 赆 IMAP"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" 郁徼禳 篷汜筮狎\n"
-" 另莛趱铉\n"
-"\n"
-" 郁徼禳 篷汜筮狎\n"
-"\n"
-"\n"
-"\n"
-" 另莛趱铉\n"
-"\n"
-"\n"
-" 蓬躔珩弭玺掾 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 体翎赀礴箸 箦 孱蓦轭 响茕 羼汜筮狎:\n"
-" 响茕 羼汜筮狎:\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 另徕荑扉箸\n"
-" 磔颸n"
-"."
+#: ../../lang.pm:1
+#, c-format
+msgid "Mexico"
+msgstr "体铋挈"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-" 邈赆糗篝狍 麸 Mandrake Linux 暹磲 祜轳狍燧盹 箦 狁赍糗 CD-ROM. 燥 \n"
-"DrakX 钶皴 犴 蓓 屦殡邈燧盹 疳贻麸 躔荞麇 箦 茈腼 CD-ROM, 栳 孱茔彘 麸 \n"
-"赳蓣镯 CD 赆 栳 骁艮箦 磲 彘筌沐翦 蓓 茈腼 犴 狨酎 栳 黢彘狍翦."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Model stepping"
+msgstr "田眙蓦 忡灬糸箪稞"
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Linux 犴轺礤珀錦n"
-"\n"
-"\n"
-" 想镪腌颃桤赍\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-" 柬镬醆n"
-"\n"
-" 柬镬醆n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-" 瘃妪秕筢 IDE\n"
-"\n"
-" 瘃妪秕筢 IDE\n"
-"\n"
-" 溴豸羼妪秕筢 IDE\n"
-"\n"
-" 溴豸羼妪秕筢 IDE\n"
-"\n"
-"\n"
-"."
+#: ../../lang.pm:1
+#, c-format
+msgid "Rwanda"
+msgstr "扬踯眙"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have any %s interfaces?"
+msgstr "各弭 贶痫轱 瘃矬狁祜爿 %s;"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Switzerland"
+msgstr "烹忮暨"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Brunei Darussalam"
+msgstr "甜耧蹴蓍 汪狁秕筢胲"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote lpd Printer Options"
+msgstr "硼殡镢蒡 狃镬彡聃箪蓓秕 lpd 尻趱瘗艮"
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"Linux 黢摅翮 黢摅翮騖n"
"\n"
@@ -2942,634 +1583,708 @@ msgstr ""
" 想镪腌颃桤赍\n"
"."
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"\n"
-" Linux\n"
-" 琉镤秣轡n"
-"."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Internet Access..."
+msgstr "妖桁轶 旭忉箸 篝 拈徜哧趱..."
-#: ../../install2.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr "旭蒺彘 屦唧珧 磲 祜聆镳镩摅弭 麸 %s"
+msgid "Norway"
+msgstr "惋疋玢哚"
-#: ../../install2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"龄蹴犰哚 瘃忉箸 豉 狁桉荇 痫 犴糸篝镩黠 篝镯 瘐褶磲 筢 (麸 "
-"狁麇唢 %s 脲唣彘), 沐黹贶 狨酎 箸灬唔彘  溟箨蒴 尻赀礴箸 溴 暹磲 箦 "
-"篚泖耧黹箪 戾 麸 梯箫 邈赆糗篝狍珧 ( 疳襻赆膻 溏扉秕胥摅翦 扉 磔 溟箨蒴 "
-"尻赀礴箸)"
+msgid "Danish"
+msgstr "尼黹挈"
-#: ../../install_any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"旭镪朕桤赍 篥茈灬 - 溴 怦蓁珀犴 篚箨艴蒡 篝轵 镳镞弪 磲 暹磲 漉磲艮 "
-"溏扉秕胥哚 磔 篚篝珈荇 狁麇啭. 嗅襻赆膻 咫葶铘 麸 蹼殛 筢 汩 翮 "
-"衢暨 狨麸 麸 瘃镡朕灬麸"
+"刘酎灬翮 屙羼泔痫哏箸 麸 numlock 痣揸赳秕 篝珥 觑眢醆n"
+"赆 麸 XFree 赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "遇茈灬 赆糗 翮 犴茔睐箸 麸 狁麇唢 %s"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"嗅襻赆膻 彘筌沐翦 糸 IP 聃桁唧彘 汩 狨酎 麸 簖篝珈.\n"
+"受桢 篝镩麇唢 瘃蒺彘 磲 彘筢麒暹  IP 溟妪桴眢 戾 狁殍祜\n"
+"鼯耖箪蓓秕 戾 翦脲咤 (疳褴溴殂灬: 1.2.3.4)."
-#: ../../install_any.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-"瞄 磲 黢珞殪镳镩摅弭 狨艮 翮 狃镨珀艴燧礴 屦殡镢 疳贻豉, 铄觊磙篝 翮 "
-"邈赆糗篝狍 戾 ``linux defcfg=floppy''"
+" 邈赆糗篝狍 麸 Mandrake Linux 暹磲 祜轳狍燧盹 箦 狁赍糗 CD-ROM. 燥 \n"
+"DrakX 钶皴 犴 蓓 屦殡邈燧盹 疳贻麸 躔荞麇 箦 茈腼 CD-ROM, 栳 孱茔彘 麸 \n"
+"赳蓣镯 CD 赆 栳 骁艮箦 磲 彘筌沐翦 蓓 茈腼 犴 狨酎 栳 黢彘狍翦."
-#: ../../install_any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "刘艮 溟箨蒴 溴 蓣彘 祜聆镳镞珞 FAT"
+msgid "Processors"
+msgstr "硼孱羼汜篝蒡"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "砰筌沐翦 扉 祜聆镳镩珈蓓 溟箨蒴 FAT 篝镯 镤玢 %s"
+msgid "Bulgaria"
+msgstr "嘛蹼汜襁"
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "腻 祓锺 磲 黢珞殪镳镩摅 broadcast 鼯襁 麸燧 NIS"
+msgid "No NIC selected!"
+msgstr "腻 屦殡蓣翮赍 NIC!"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "娃箫 逾茈祓狁眙 赆 瞄犴 誊汩屙"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"葬 疳襻贶豉 疳贻翎 栳 狯衢皴栾 汩 磲 犴徕徼扉篝暹 麸 簖篝珈 筢: %s\n"
-"\n"
-"\n"
-"容脲翦 瘃徙灬糸贶 磲 狯衢褫篝 狨糗 翎 疳贻翎;\n"
+"旭镡朕灬翎 赆糗 翮 颀桁轶.\n"
+"娘觊燔篝 翮 簖礓弩 戾 麸 net_monitor 麸 mcc. 另 溴 脲轸秕胥摅彘 "
+"簖礓弩, 酎翦 栳 瘃蒺彘 磲 尻觊磙箦翦 钺碥 翮 颀桁轶."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No"
-msgstr "槛"
+msgid "partition %s is now known as %s"
+msgstr " 赆糗綮珞 %s 暹磲 酤襻 沩艮  %s "
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yes"
-msgstr "歪"
+msgid "Backup Other files..."
+msgstr "另暨泷狯 馏鲠脲哚 峨膣 狁麇啭..."
-#: ../../install_any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "SMB server IP"
+msgstr "IP 溟妪桴眢 SMB 孱躔珩弭玺"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Congo (Kinshasa)"
msgstr ""
-"各弭 屦殡蓊彘 麸躜 疳襻贶豉 溟彡镬轶糨(): %s\n"
-"\n"
-"\n"
-"刘麸 镩 溟彡镬轶糨 暹磲 孱 锺轶祜 屙羼沐. 腻 蓣秕 贶痫轱 沩酎 "
-"瘃腌灬\n"
-"狍鲕脲獒, 犭胲 祓锺稞 磲 怦彖稞 磔. 渝 狨艮 翮 疱襁痿 忮忉轾桢唪 "
-"閈n"
-"蓣弭 邈赆翎篝摅彘 翮 翦脲豸徇 蓐滹箸 麸 篚眙镬羼.\n"
-"\n"
-"\n"
-"胚篝 廨忉轱 汩 翮 邈赆糗篝狍 狨酤 豉 溟彡镬轶酤;\n"
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "System configuration"
-msgstr "妖桁轶 篚篝揿狒矧"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr " 疬磲赆 赆翎綮摅妁 麸 溥箨秕 %s 栳 狃镨珀艴翦 篝镯 溥箨!"
-#: ../../install_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System installation"
-msgstr "陪赆糗篝狍"
+msgid "Installing HPOJ package..."
+msgstr "陪赆糗篝狍 疳贻麸 HPOJ..."
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "拈彡镳 脲轸秕胥哚 溟牯"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"涕 瘃矬狁祜箪蓓 溟箨蒴 尻赀礴箸 筢 溥礤 翮 漉磲酎翮翎 磲 尻觊磙箦翦\n"
+"麸 簖篝珈 筢 鼯襁 翮 黢摅 麸 瘃镢褴祆狒矧 尻赀礴箸. 刘酎 暹磲 "
+"黢摅殪 遘 溴 栎脲翦\n"
+"磲 邈赆翎篝摅弭 麸 LILO ( 麸 grub), 遘 贶痫轱 茈腼 脲轸秕胥殛 "
+"赆翎篝褫 麸 LILO\n"
+" 遘 镩 聃桁唧彘 筢 溴 屦轸褫痫蹴 翮 黢摅 LILO. 刘艮 溟箨蒴 祓锺暹\n"
+"屦唧珧 磲 黢珞殪镳镩玷暹 箦 篚礓踽箪 戾 翮 溟箨蒴 溟荏珧 麸 Mandrake,\n"
+"贶盹眙狎 艴觑朦翦耒 翮 屦犴狯锺 麸 篚篝揿狒矧 戾糗 狃 箫忉褶 怆茆.\n"
+"容脲翦 磲 溏扉秕胥摅弭 溟箨蒴 尻赀礴箸;\n"
+"%s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "抨赀礴箸 溟牯"
+msgid ", USB printer \\#%s"
+msgstr ", 尻趱瘗艮 USB \\#%s"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr " 赆糗綮珞 狃蒴貅: %s"
+msgid "Latvian"
+msgstr "隋麸黹挈"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr " 箱玢 梳糗綮珞珧 DrakX 怦揸 糸 疳襻贶豉 臊箦轵:"
+msgid "monthly"
+msgstr "扃黹徇"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "腻 祓锺 磲 怦 狁赍酎 齄耧 汩 邈赆糗篝狍"
+msgid "Module name"
+msgstr "柬镬 狁桉狒矧"
-#: ../../install_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+msgid "Start at boot"
+msgstr "郁珥 尻赀礴箸 篚篝揿狒矧"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Incremental Backups"
msgstr ""
-"甜锺暹翦 酤襻 磲 赆翎綮摅弭 麸 溥箨 %s\n"
-"剪犴 翦脲辋箦翦, 扃 铄鬈箦翦 磲 狃镨珀妪箦翦 疳酤眙狎 `w'"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use fdisk"
-msgstr "遵摅 fdisk"
+msgid "First sector of drive (MBR)"
+msgstr "旭矧 麸燧狎 麸 溥箨秕 (MBR)"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "旭矬狁祜箪蓓弪 赆翎綮摅彘 溥箨秕"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"茧弪 镩 躔荞黠躞弪 赆翎綮摅彘 赆 翎 溴滹燧磲 麸躜 篝镯 溥箨 %s 栳 麽栾"
+msgid "El Salvador"
+msgstr "烹 俞脞徜"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"各弭 疱耖篌羼秕 狃 蓓犴 溥箨秕, 箦 痫辄 栎脲翦 磲 邈赆翎篝摅弭 麸 "
-"Linux;"
+msgid "Use Unicode by default"
+msgstr "旭镥痖脲沆蓓 黢摅 Unicode"
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Erase entire disk"
-msgstr "拈徙襻鲛 镫腌耧 麸 溥箨秕"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "麸 荞桉 麸 瘐褶磲 GNU/Linux 痫 麇轳哝弭衢 翮 篚箨艴"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "瘤徇皴箸 Windows(TM)"
+msgid "Trying to rescue partition table"
+msgstr "旭矬疖桢獒 溟荏珧 疬磲赆 赆翎綮摅妁"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"腻 躔荞麇 赆糗祠珞 FAT 汩 犭脶戕 戾爿栾躜 ( 溴 躔荞麇 狁赍酎 齄耧)"
+msgid "Option %s must be an integer number!"
+msgstr " 屦殡镢 %s 瘃蒺彘 磲 暹磲 彡蓠衢矧 狁殍禳!"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
+"绣溥 痫 栳 瘃蒺彘 磲 篚祓腌颃箦翦:\n"
+"%s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "岭脶戕 戾爿栾躜 FAT 狃蒴貅: %s"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "腻 祓锺 磲 铄觊磙簌 麸 live upgrade!!!\n"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "眠礤翎 犭脶戕 糸 赆糗綮珞珧 豉 Windows"
+msgid "Name: "
+msgstr "柬镬: "
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 尻狒镬忑耖 黢狒 (24 bits)"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Allow all users"
+msgstr "硼轸褫疱翎 汩 秕 麸躜 黢摅翦"
+
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "燥 屦唧珈 赆糗篝珈 翮 MandrakeSoft"
#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "岭脶戕 戾爿栾躜"
-#: ../../install_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "partition %s"
-msgstr "赆糗綮珞 %s"
+msgid "Cable connection"
+msgstr "梳膣溟彡 簖礓弩"
-#: ../../install_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "蚤 齄耧 栎脲翦 磲 犟狒摅弭 汩 翎 windows 篝"
+msgid "User"
+msgstr "遵摅翮"
-#: ../../install_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"Do you agree to loose all the partitions?\n"
msgstr ""
-"醒嫌献!\n"
+"腻 祓锺 磲 溟徕荏 麸 疬磲赆 赆翎綮摅妁 翮 篚箨艴掾 %s,, 暹磲 痫臊\n"
+"赆翦篝襻祆蓓矧 :( 柔 瘃矬疳柁簌 磲 篚礤鬟簌 狯衢颃眙狎 糸 脶龛狍燧礤 \n"
+"赆翎綮摅彘 (纤 粤 呐南膛土 栳 麽栾!). 茈腌 屦殡镢 筢 暹磲 磲\n"
+"扃 屦轸褫翦 篝 DrakX 磲 徙氵铄 麸 疬磲赆 赆翎綮摅妁. \n"
+"燥 篥茈灬 暹磲: %s\n"
"\n"
-"燥 DrakX 瘃蒺彘 酤襻 磲 犭胲铄 麸 燧沐栾 翮 赆糗綮珞珧 豉 Windows.\n"
-" 溟徜殛狍哚 狨艮 屐疱耖蓣彘 觊礓秕. 跑 溴 麸 蓣弭 贶礤 掬,\n"
-"忏暹翦 狃 翮 邈赆糗篝狍 咫葶铄翦 翮 赆糗綮珞 戾 麸 \n"
-"scandisk 燧筢 狃 翎 Windows 赆 赆糗 疱襁痿 翮 狃镪狒彡羼燔糸箸 \n"
-"(defragment). 体糗 铄觊磙篝 钺碥 翮 邈赆糗篝狍.\n"
-"体糗 栳 瘃蒺彘 磲 犟狒摅弭 犴暨泷狯 狍鲠脲哚 豉 溴滹燧睐 筢.\n"
-"跑 暹篝 筮泔躐镩, 疳艮篝 彭糗铄."
+"吁祧暹翦 磲 溟徙襻鲲 弪 镩 赆翎綮摅彘;\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "想镪腌颃桤赍 磔"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "抨趱瘗艮 篝珥 疳褴腚珉 柁襻 \\#%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Name"
+msgstr "柬镬"
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed"
+msgstr "狃雉貅哚 mkraid"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 3 Emulation"
+msgstr "旭矬镬镞 3 曙蹯痖"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sending files..."
+msgstr "琉矬麸朕 狁麇啭..."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli (Phonetic)"
+msgstr "审襻揠 (鳄礴糸挈)"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to rpm tools"
+msgstr "瘃忉箸 箦 羼汜脲哚 rpm"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr "屦孱羼汜筮"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "旭蒺彘 磲 屦殡蓊翦/锺唧弭 扉 篚箨艴/尻趱瘗艮!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
+msgstr "旭腌灬 溟赆轾燔豉 篝珥 瘃忉箸 麸 CD."
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Phone number"
+msgstr "榴殍禳 翮脲鳋盹"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "遇茈灬: 镤玢 \"%s\" 翮 贶耵狎 搠秕 筢 溴 躔荞麇 篝 脒篝"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer name, description, location"
+msgstr "柬镬 尻趱瘗艮, 疱耖泷狯, 栎箸"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr "USA (屙彷耖)"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"Please choose the\n"
+"media for backup."
msgstr ""
-" 赆糗綮珞 豉 Windows 暹磲 痫臊 赆翎赍耢狒轶燧礴, 疳襻赆膻 赳蓊翦 瘃 "
-"麸 ``defrag'' 燧筢 狃 翎 Windows 赆 铄觊磙篝 钺碥 翮 邈赆糗篝狍 麸 "
-"Mandrake Linux "
+"嗅襻赆膻 屦殡蓊翦 麸 \n"
+"燧箫 汩 翎 犴暨泷狯 \n"
+"狍鲠脲哚"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "震镫镢哝弭衢 麸 燧沐栾 翮 赆糗綮珞珧 豉 Windows"
+msgid "Use Xinerama extension"
+msgstr "遵摅 屦蓐翎箸 Xinerama"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "Loopback"
+
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"腻 祓锺 磲 犭胲铢 燧沐栾 篝珥 赆糗綮珞 FAT, \n"
-"瘃镪朕桤赍 麸 疳襻贶豉 胲栾: %s"
+"龄蹴犰哚 簌篝稞 翦耢狒轶祜 麸 mkbootdisk: \n"
+" %s \n"
+" %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "渝 糸 酏痫 赆糗綮珞珧 栎脲翦 磲 犭胲铄翦 燧沐栾;"
+msgid "West Europe"
+msgstr "孽糸贽 捧颃痃"
-#: ../../install_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "遵摅 麸 咫妪桢耧 齄耧 篝珥 赆糗綮珞 豉 Windows"
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"腻 躔荞麇 赆糗綮珞 FAT 汩 黢摅  loopback ( 溴 躔荞麇 狁赍酎 齄耧)"
+msgid "Harddrake2 version %s"
+msgstr "戈滹箸 Harddrake2 %s"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "梯沐栾 赆糗綮珞珧 swap 箦 MB"
+msgid "Copying %s"
+msgstr "另糸泷狯 %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "梯沐栾 忉箝贽 赆糗綮珞珧 篚篝揿狒矧 箦 MB:"
+msgid "Choose color"
+msgstr "硼殡蓊翦 黢"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "硼殡蓊翦 翎 戾爿桤"
+msgid "Dominican Republic"
+msgstr "娘扉黹赆磙 溺祜犟狒哚"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "酗獒 赆糗綮珞 栎脲翦 磲 黢珞殪镳镩摅弭 汩 麸 Linux4Win;"
+msgid "Swaziland"
+msgstr "语踽骈胲礓"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "遵摅 赆糗綮珞珧 Windows 汩 loopback"
+msgid "Set-UID"
+msgstr "像轶禳 UID"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "腻 躔荞黠蹴 赆翎綮摅彘 瘃矧 黢摅"
+msgid "Please check if you are using CDRW media"
+msgstr "嗅襻赆膻 锺唧翦 犴 贶礤翦 黢摅 篚箨艴掾 CDRW"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
+"硼殡蓊翦 麸 溥箨 痫 栎脲翦 磲 溟徙褴翦 汩 磲 邈赆翎篝摅弭 \n"
+"翮 磔 赆糗綮珞 Mandrake Linux. 醒嫌献: 茧 翎 溴滹燧磲 栳 溟徙襻鲲\n"
+"赆 栳 暹磲 徜狒 屦犴狯锺 麸躜!"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "遵摅 躔狁黠躞 赆翎綮摅妁"
+msgid " on parallel port \\#%s"
+msgstr " 篝 疳褴腚珉 柁襻 \\#%s"
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "腻 躔荞麇 狁赍酎 咫妪桢耧 齄耧 汩 溏扉秕胥哚 磔 赆翎綮摅妁"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-#: ../../install_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use free space"
-msgstr "遵摅 咫妪桢耧 齄耧"
+msgid "Generic 2 Button Mouse"
+msgstr "缅黹觑 酏痫 戾 2 痣揸赳"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "旭蒺彘 磲 蓣弭 扉 赆糗綮珞 FAT mounted 篝 /boot/efi"
+msgid "Remove the logical volumes first\n"
+msgstr "瘤衢褫篝 瘃 糸 腼汩贻 祜碥溴騖n"
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"腻 蓣弭 锺唧彘 赆糗綮珞 swap\n"
-"\n"
-"歪 篚礤鬟簌;"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"旭蒺彘 磲 蓣弭 扉 忉箝贽 赆糗綮珞.\n"
-"溺扉秕胥摅翦 屦殡蓊翦 扉 赆糗綮珞.\n"
-"体糗 锺唧翦  箸戾唢 簖礓弩珧 麸 `/'"
+"龄蹴犰哚 邈泷狯掾 /etc/sysconfig/bootsplash\n"
+"燥 狁麇唢 溴 怦蓁珀."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "旭忉箸 篝 拈徜哧趱"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"疙 燧耧 麸 蹼殛稞 筢 黢彘苕弭衢 ``殇辄牯玺秕'' 镤玢稞 汩 磲 "
-"脲轸秕胥摅彘.\n"
-"甜锺暹翦 磲 怦暹翦 篦弭殛蒡 痣珩秭锺咤 篝: %s"
+"篚眙弭徙燧礴 y 麸 痣衢筮秕 赍殪蓓秕\n"
+"箦 狁殍禳 麽襻牯揆"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"吁泖狁玺揆獒, 邈赆糗篝狍 镫镪腌颃桤赍.\n"
-"瘤衢褫篝 翮 溟箨蒴 麸 CD 尻赀礴箸 赆 疳艮篝 return 汩 "
-"屦犴尻赀礴箸.\n"
-"\n"
-"\n"
-"瞄 痣珩秭锺咤 篦弭殛 戾 溟锺棹箦轵 狨艮 翮 蓐滹箸 麸 Mandrake Linux,\n"
-"篚焘秕脲豸暹翦 翮 箦脒溽: \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"须珩秭锺咤 篦弭殛 戾 糸 聃桁唧彘 麸 篚篝揿狒 筢 躔荞黠蹴 篝 "
-"篦弭殛黒n"
-"赍鲕脶轱 麸 屦唧珈秕 镤玢稞 黢摅珧 麸 Mandrake Linux."
+"瞄 扉 脒篝 戾 糸 溟徼蒹殪弪 屙麸胼 汩 麸 赳蓣镯 尻趱瘗艮 贶眙 觌殛 "
+"篝 痣揸赳 \"抨酏瘗箸 脒篝狎 屙麸膻韁"."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Enabling servers..."
+msgstr "彭羼泔痫哏箸 孱躔珩弭玺..."
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "抨酏瘗箸 滹觊灬篝殛 箦脒澌..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "震荞麇 掬 赆糗綮珞 戾 箸戾唢 簖礓弩珧 %s\n"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
"\n"
+"Depending on your hard drive configuration, several options are available:\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
-" 旭矬秣轡n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
-" 恶礴箸\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
"\n"
-" 朵彘醆n"
+" Linux\n"
"\n"
"\n"
+" 磔颸n"
+" Linux\n"
"\n"
"\n"
"\n"
"\n"
+" 黢摅翮騖n"
"\n"
"\n"
"\n"
"\n"
"\n"
-" 体翎鲲褴\n"
"\n"
"\n"
"\n"
-" 茧醆n"
"\n"
-
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
+" 犴轺礤珀錦n"
+" Linux\n"
"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
+" 孱' 锺轶祜齖n"
"\n"
"\n"
-"1. License Agreement\n"
+" 燥燧狎 Windows 燥燧狎 Windows \n"
"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
+" Linux 拈徙襻鲛\n"
+" 燥燧狎 Windows \n"
+" 燥燧狎 Windows 岭脶戕 戾爿栾躜\n"
"\n"
+" 燥燧狎 Windows \n"
"\n"
-"2. Limited Warranty\n"
+" Linux 燥燧狎 Windows \n"
"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
+" 燥燧狎 Windows \n"
"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
+" 燥燧狎 Windows 磔颸n"
"\n"
+" 拈徙襻鲛\n"
+" 磔 Linux\n"
"\n"
-"3. The GPL License and Related Licenses\n"
"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
"\n"
"\n"
-"4. Intellectual Property Rights\n"
"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+" 诉篝 瘤徇皴箸 燥燧狎 Windows \n"
+" 茧醆n"
"\n"
"\n"
-"5. Governing Laws \n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
"\n"
+" 旭矬狁祜箪蓓颸n"
"\n"
-" Linux\n"
"\n"
+" 想镪腌颃桤赍\n"
"\n"
-" Linux\n"
"\n"
+"."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ukraine"
+msgstr "硝犟犴哚"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Application:"
+msgstr "碰狁祜戕:"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "External ISDN modem"
+msgstr "蓬羼殛 ISDN modem"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
+msgstr "犴 锺轶翦 磲, 狃雉蓦弩灬 犴狯锺茯 咫葶黠 燧簌 翎黪漶镬暹秕."
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr " 屦殡镢 筢; (孱 锺轶祜 %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "硼唠躞 瘃镡腌燔豉"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "彦秕黹"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
"\n"
-" 朵彘醆n"
"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
-" 朵彘醆n"
-" 朵彘醆n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" 朵彘醆n"
-" 朵彘 朵彘醆n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
"\n"
"\n"
"\n"
"\n"
+" 孱' 锺轶祜齖n"
"\n"
"\n"
"\n"
"\n"
+" 屙羼泔痫哏箸\n"
"\n"
"\n"
"\n"
@@ -3578,319 +2293,512 @@ msgstr ""
"\n"
"\n"
"\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
+msgstr ""
+"踢 疱耖篌羼弪 滹觊灬篝殛蒡 箦脒溴 篝茈桤赆 篝镯 尻趱瘗艮.\n"
+"甜锺暹 磲 疱褴箦 贶痫轱 黢矧 燧黢 尻酏瘗箸 磲 铄觊磙箦.\n"
+"梳糗篝狍 尻酏瘗箸:\n"
+"%s\n"
"\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr "赆桤戾耖碥"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and one unknown printer"
+msgstr "赆 蓓狎 茔睐篝矧 尻趱瘗艮"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "Ireland"
+msgstr "神脶礓哚"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "蓐滹箸 瘐褶磲"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " 氧桁唧彘 硼犴狯锺茯 "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "胚磲 簌篝 颀桁轶;"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
+"拈徜哧趱颸n"
+" 拈徜哧趱 硼屙颸n"
" Linux\n"
"\n"
"\n"
+" 蛾躐颸n"
"\n"
+" 悬翦\n"
"\n"
-" 朵彘醆n"
-"\n"
-"\n"
-" 缅黹贶\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 朵彘 藻觎珩啭箸\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 三襻\n"
-"\n"
-" 茧醆n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
+" 狃朦\n"
"\n"
"\n"
+" 孱' 锺轶祜齖n"
+" 拈徜哧趱颸n"
"\n"
+" 拈徜哧趱颸n"
"\n"
-" 朵彘 冕腚哚\n"
-" 茧醆n"
-" 冕腚哚\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "罗灬 `%s'\n"
+"."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Help"
-msgstr "嘛掼彘"
+msgid "Wizard Configuration"
+msgstr "氧桁唧彘 箱玢稞"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "not configured"
-msgstr "溴 聃桁唧翮赍"
+msgid "Autoprobe"
+msgstr "刘酎灬翮 孱蒴狍"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure"
-msgstr "妖桁轶"
+msgid "Backup system files..."
+msgstr "另暨泷狯 馏鲠脲哚 篚篝揿狒矧 狁麇啭..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "歪 篚礤鬟簌;"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "腻 祓锺 磲 黢珞殪镳镩摅 broadcast 鼯襁 麸燧 NIS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "旭镪朕桤赍 篥茈灬 赆糗 翮 邈赆糗篝狍 豉 疳贻豉:"
+msgid "Removing printer \"%s\"..."
+msgstr "眠礤翎 狯徇皴箸 麸 尻趱瘗艮 \"%s\"..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "旭镪朕桤赍 篥茈灬 赆糗 翮 翎铋睃扃箸 豉 疳贻豉:"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"岭脶戕 Cd-Rom!\n"
+"嗅襻赆膻 溏膻篝 翮 栎箸 麸 狁麇唢 auto_install.cfg file is located.\n"
+"\n"
+"瘤摅翦 麸 赍睃 犴 溴 栎脲翦 磲 贶礤翦 黢摅 翮 狨酎灬翮 邈赆糗篝狍珧.\n"
"\n"
-"嗅襻赆膻 彘筌沐翦 麸 Cd-Rom 戾 镬 \"%s\" 篝镯 镤玢 筢 赆 疳艮篝 "
-"彭糗铄.\n"
-"跑 溴 麸 蓣弭, 疳艮篝 陵 汩 狃秭蹉 邈赆糗篝狍珧 狃 狨酎 麸 CdRom."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "恶礴箸"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "硼唣邃 痣珩秭锺辋 痫 祓锺稞 磲 怦彖稞 燧簌 豉 屙麸膻 cpuid"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Accept"
-msgstr "琉镤秣"
+msgid "Peru"
+msgstr "绣耧"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing package %s"
-msgstr "陪赆糗篝狍 疳贻麸 %s"
+msgid " on device: %s"
+msgstr "郁 吁箨艴 : %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d 疳贻翎"
+msgid "Remove Windows(TM)"
+msgstr "瘤徇皴箸 Windows(TM)"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "No details"
-msgstr "座襁 脲痿镬蓠彘弪"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"五觊碥彘 翮 躔珩弩哚 孱躔珩弭玺 泷犰灬麸箦轳 X (狨酎 暹磲 狃狁徇翮麸 "
+"汩 磲 尻翦脲篝暹 麸 XFree)."
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Details"
-msgstr "隋痿镬蓠彘弪"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
+"祥 疱耖篌羼弪 糸燧 蓣秕 孱狩桢 \n"
+"狃 麸 簖篝珈 筢騖n"
+"岭胲铘 糸 犴 黢彘苕弭衢."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "嗅襻赆膻 疱耖燧礤翦, 瘃镥麸殪狍哚 邈赆糗篝狍珧..."
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"硼殡蓊翦 麸 狁麇唢 泷犰灬麸箦轳蒡 麸 赆糗腼泔 赆 贶眙 觌殛 篝 "
+"'旭矬柁赙'"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "彭狃镬蓓 黢矧 "
+msgid "Madagascar"
+msgstr "提溽汜箨荞"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Estimating"
-msgstr "抨暨扃箸"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing"
-msgstr "陪赆糗篝狍"
+msgid "Cron not available yet as non-root"
+msgstr "燥 cron 溴 暹磲 彡 溟徼蒹殪 篝秕 扃-root"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "硼殡蓊翦 翎 疳贻翎 痫 栎脲翦 磲 邈赆翎篝摅弭"
+msgid "System"
+msgstr "育篝珈"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "烹荀轶翮 陪赆糗篝狍"
+msgid "Do you want to use this feature?"
+msgstr "容脲翦 磲 黢珞殪镳镩摅弭 狨艮 翮 脲轸秕胥哚;"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "另犴甍箸 屦殡邈燧睐 疳贻豉"
+msgid "Arabic"
+msgstr "榴徕殛"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "贮耵/琉镨揸艴箸 箦 溟箨蒴"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr ""
+"\n"
+"- 硼殡镢蒡:\n"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<- Previous"
-msgstr "<- 旭镧泔屙"
+msgid "Password required"
+msgstr "琉衢翦唪衢 犍溟挈 瘃忉箸"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Install"
-msgstr "陪赆糗篝狍"
+msgid "%d minutes"
+msgstr "%d 脲痿"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "刘酎灬翮 瘃镡镫 屦殡邈燧睐 疳贻豉"
+msgid "Graphics card: %s"
+msgstr "受耵 泷狯殛: %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "腻 祓锺暹翦 磲 狃镥痖胼铄翦 狨酎 麸 疳贻麸. 旭蒺彘 磲 犴徕徼扉篝暹"
+msgid "WebDAV transfer failed!"
+msgstr " 戾翎鲲褴 WebDAV 狃蒴貅!"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"刘酎 麸 疳贻麸 瘃蒺彘 磲 犴徕徼扉篝暹\n"
-"胚篝 筮泔躐矧  栎脲翦 磲 麸 狃镥痖胼铄翦;"
+msgid "XFree configuration"
+msgstr "氧桁唧彘 XFree"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "腻 祓锺暹翦 磲 狃镥痖胼铄翦 狨酎 麸 疳贻麸. 胚磲 掬 邈赆翦篝珈蓓"
+msgid "Choose action"
+msgstr "硼殡蓊翦 瘃茴"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "刘酎 暹磲 狃衢麸屙 疳贻麸, 溴 祓锺暹 磲 狃镥痖脲沐"
+msgid "French Polynesia"
+msgstr "冕腚殛 酗膈礴筮"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 箦轳獒挈\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 孱' 锺轶祜齖n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 体 耧滠觊 犴轺礤珀錦n"
+"\n"
+"\n"
+" 硼屙颸n"
+" 屙羼泔痫哏箸 酤襻\n"
+"\n"
+"\n"
+"."
+
+#: ../../services.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "腻 祓锺暹翦 磲 屦殡蓊弭/狃镥痖胼铄翦 狨酎 麸 疳贻麸"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "震矬艮耖铉 豉 OKI 4w 赆 篚焘狒 winprinters."
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "柔 狯衢皴栾 翎 疳襻贶豉 疳贻翎 "
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "抨赀礴箸 麸 ALSA (Advanced Linux Sound Architecture) 篚篝揿狒矧 搠秕"
-#: ../../install_steps_gtk.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "柔 邈赆翎篝徼稞 翎 疳襻贶豉 疳贻翎"
+msgid "Installing driver for %s card %s"
+msgstr "陪赆糗篝狍 镤玢稞 汩 %s 贶耵 %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"腻 祓锺暹翦 磲 屦殡蓊弭 狨酎 麸 疳贻麸 溟 溴 躔荞麇 狁赍酎 齄耧"
+"'各弭 戾翎鲚皴 麸 瘃 瘃镥痖脲沆蓓 尻趱瘗艮 筢 (\"%s\"), 歪 暹磲 "
+"瘃镥痖脲沆蓓矧 尻趱瘗艮 赆 篝 磔 磔 簖篝珈 尻酏瘗箸 %s;"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "羽秕溽辄翮翎: %s\n"
+msgid "Enable Server"
+msgstr "彭羼泔痫哏箸 蓬躔珩弭玺"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "梯沐栾: %d KB\n"
+msgid "Ukrainian"
+msgstr "硝犟犴殛"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "戈滹箸: %s\n"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+" 瘃忉箸 溟牯 溴 尻翦脲唪 赆 溴 祓弩 磲 尻觊礴桢. 嗅襻赆膻 "
+"咫葶铘 翮 颀桁轶 麸 蹼殛稞 筢. 体糗 瘃矬疳柁篝 磲 聃桁唧弭 麸 "
+"狃镬彡聃箪蓓 尻趱瘗艮 筢."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "柬镬: %s\n"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "嗅襻赆膻 彘筌沐翦 翮 溟箨蒴 抨赀礴箸 篝镯 镤玢 %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bad package"
-msgstr "塑栾 疳贻麸"
+msgid "Local network(s)"
+msgstr "燥痖挈 倪牯躏()"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Other"
-msgstr "峨腼"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "瘤徇皴箸 Windows(TM)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "吁盹腴挈 燧沐栾: %d / %d MB"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"燥 %s 筢 蓣彘 聃桁轶翦. \n"
+"甜锺暹翦 酤襻 磲 筢颃箦翦 葶泷狯 戾 麸 \"XSane\" 狃 麸 酗膈燧筢/民狯殛 "
+"狃 戾盹 弼狁祜泾."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Next ->"
-msgstr "硼屙 -"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "烹邈牯蒡 USB"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "硼殡镢 铄鼯耖篝 疳贻豉"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 旭矬柁赙 磔颸n"
+" 择镳镳镞珞 诉篝 瘤徇皴箸 彭糗铄閈n"
+"\n"
+"\n"
+"\n"
+" 拈徙襻鲛\n"
+"\n"
+"\n"
+"!"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Package Group Selection"
-msgstr "硼殡镢 响茕 嗅贻豉"
+msgid "System mode"
+msgstr "梳糗篝狍 篚篝揿狒矧"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"燥 簖篝珈 筢 溴 蓣彘 狁赍麸 瘘耧躜. 甜锺暹 磲 犴糸戾豉疬箦翦 "
-"瘃镡朕灬翎\n"
-"篝珥 邈赆糗篝狍 麸 Mandrake Linux. 跑 篚焘暹 狨酎, 祓锺暹翦 磲 滹觊燔箦翦 "
-"邈赆糗篝狍 赍殪蓓秕.\n"
-"嗅艮篝 F1 赆糗 翮 尻赀礴箸 狃 CDROM, 戾糗 泷茗翦 `text'."
+"瞄 磲 尻趱瘙箦翦 箦 蓓犴 尻趱瘗艮 NetWare, 瘃蒺彘 磲 濑箦翦 麸 镬 麸 "
+"孱躔珩弭玺 尻趱瘙箦 NetWare (隅戾啭箸! 甜锺暹 磲 暹磲 溟狯锺弭殛 狃 麸 "
+"溟牯踽挈 镬 TCP/IP!), 麸 镬 麸 尻趱瘗艮 篝镯 镳镞 屦殍蹯暹翦 "
+"瘃忉箸, 赆棹 赆閈n"
+"镳镩徜摒雉 狃狁徇翮翮 痣珩秭锺哚 疱襁 黢摅翮 赆 犍溟觑 瘃忉箸."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Save packages selection"
-msgstr "琉镨揸艴箸 屦殡镢掾 疳贻豉"
+msgid "Netmask:"
+msgstr "誊箨 溟牯:"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Automated"
-msgstr "刘酎灬麸"
+msgid "Append"
+msgstr "旭矬荞翮箸"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "硼犴狯豉箸"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"另犴甍箸 脒篝狎 尻趱瘗酤 ( 汩 磲 屐鲠磉箦 秕 麸躜 溟徼蒹殪秕 "
+"狃镬彡聃箪蓓秕 尻趱瘗糨)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
+"悬翦 CUPS\n"
+"\n"
+" LPD LPRng CUPS\n"
+"\n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+"\n"
+"."
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"育篝珈醆n"
+" 蚤\n"
+"\n"
+" 瞄 旭秣珈蓓秕 Linux\n"
+" PCI\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 磔"
#: ../../install_steps_interactive.pm:1
#, c-format
@@ -3907,3289 +2815,3869 @@ msgstr ""
"\n"
"甜锺暹 磲 瘃雉殪荇 磲 屦犴犭茆弭 翮 邈赆糗篝狍.\n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reboot"
-msgstr "硼犴尻赀礴箸"
+msgid "Network printer \"%s\", port %s"
+msgstr "抨趱瘗艮 溟牯 \"%s\", 椠襻 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"体耖贶 廪灬翎 溴 镫镪腌颃桤赆.\n"
-"\n"
-"容脲翦 筮泔躐 磲 邈赆翎脲啉弭 酤襻;"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧..."
+"嗅襻赆膻 屦殡蓊翦 糸 瘃矬狁祜爿狎 溟牯 栳 篚礓彖暹 篝 麸痖挈 筢 溥牯躏."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "砰筌沐翦 茕彘 溟箨蒴 篝镯 镤玢 %s"
+msgid "OK to restore the other files."
+msgstr "彭糗铄 汩 翮 屦犴狯锺 豉 茈膣 狁麇啭."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"甜锺暹 磲 黢彘狍翦 磲 犭胲铄翦 翮 Open Firmware boot-篚箨艴 翦 磲\n"
-" 屙羼泔痫檗箦翦 麸 瘃襻祆 尻赀礴箸. 另 篝珥 屦犴尻赀礴箸 溴 溴唪 翮 "
-"瘃雉耧疝 麸 瘃襻祆 尻赀礴箸,\n"
-"疳艮篝 麸 Command-Option-O-F 赆糗 翮 屦犴尻赀礴箸 赆 彘筌沐翦:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" 体糗 泷茗翦: shut-down\n"
-"郁珥 屦屙 尻赀礴箸 栳 瘃蒺彘 磲 溴唪 翮 瘃雉耧疝 麸 瘃镢褴祆狒矧 "
-"尻赀礴箸 ."
+msgid "Please choose your keyboard layout."
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 溟荇犷 痣珀赳镫镢唢."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-" 邈赆糗篝狍 麸 瘃镢褴祆狒矧 尻赀礴箸 狃蒴貅. 旭镪朕桤赍 麸 彡秕栾 "
-"篥茈灬:"
+msgid "Printer Device URI"
+msgstr "吁箨艴 尻趱瘗艮 URI"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing bootloader"
-msgstr "旭襻祆 尻赀礴箸"
+msgid "Not erasable media!"
+msgstr "燥 燧箫 溴 祓锺暹 磲 筲珞翦!"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"遇茈灬 赆糗 翮 邈赆糗篝狍 麸 aboot, \n"
-"瘃矬疖桢獒 忮忾狍燧礴 邈赆糗篝狍珧, 彡 赆 犴 狨酎 蓣彘 筢 狃雉蓦弩灬 "
-"翮 赆翎篝耧鲛 翮 瘃珧 赆糗綮珞珧;"
+msgid "Terminal-based"
+msgstr "遵摅 翦耢狒殛稞"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "容脲翦 磲 黢珞殪镳镩摅弭 麸 aboot;"
+msgid "Installing a printing system in the %s security level"
+msgstr "陪赆糗篝狍 篚篝揿狒矧 尻酏瘗箸 篝 屦唣邃 狍鲕脲獒 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-msgstr ""
-"轴唔弭衢 瘗 蓣弭 蓓 榴麽唢 躲睐篝颸n"
-"扃鬈礴灬, yaboot bootloader 溴 栳 滹蹼蔌彘 汩 筢.\n"
-" 邈赆糗篝狍 栳 篚礤鏖篝暹, 犭胲\n"
-"栳 黢彘狍翦 磲 黢珞殪镳镩摅弭 麸 BootX 汩 磲 铄觊磙箦翦 麸 扃鬈礴燔 筢"
+msgid "The user name is too long"
+msgstr "刘酎 麸 镬 黢摅翮 暹磲 痫臊 灬犟"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "旭镥麸殪狍哚 瘃镢褴祆狒矧 尻赀礴箸..."
+msgid "Other OS (windows...)"
+msgstr "峨腼 脲轸秕胥殛 (windows...)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "戍溟挈 旭忉箸 拈狩彘耖篝 燥燧"
+msgid "WebDAV remote site already in sync!"
+msgstr "燥 狃镬彡聃箪蓓 WebDAV 暹磲 掬 箦 篚泖耧黹箪!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "柬镬 遵摅翮 拈狩彘耖篝 燥燧"
+msgid "Reading printer database..."
+msgstr "另茔睐箸 廛箸 溴滹燧睐 尻趱瘗酤..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "燥燧狎 Windows "
+msgid "Generate auto install floppy"
+msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "虚篝镳镞珞 燥燧 Windows"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"燥燧狎 Windows 孱躔珩弭玺掾\n"
-" 燥燧狎 燥燧狎 Windows \n"
-"\n"
-" 燥燧狎 Windows 燥燧狎 柬镬 黢摅翮 戍溟挈 旭忉箸騖n"
-"."
+"\t\t 镬 黢摅翮: %s\n"
+"\t\t 篝 栎箸: %s \n"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "蓬躔珩弭玺掾 NIS"
+msgid "Somalia"
+msgstr "语灬脒"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "燥燧狎 NIS"
+msgid "No open source driver"
+msgstr "梳磔磲 镤玢 犴镩黥稞 掰溟赆"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "虚篝镳镞珞 NIS"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+" 狍鲕脲獒 暹磲 咪獒 麸 瘃镧泔屙秕 屦轲蒌秕, 戾 麸 簖篝珈 翦脲啭 "
+"觌彘篝. 狍鲕脲獒 暹磲 篝 燧汩篝 漉磲酎."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Nicaragua"
+msgstr "烷赆褴泔踽"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "蓬躔珩弭玺掾 LDAP"
+msgid "New Caledonia"
+msgstr "洼 梳腌滹磉"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "European protocol (EDSS1)"
+msgstr "捧聩疳 旭镫腼 (EDSS1)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "虚篝镳镞珞 LDAP"
+msgid "Video mode"
+msgstr "另茈躞 镨珧"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Please enter your email address below "
+msgstr "嗅襻赆膻 彘筌沐翦 翮 珉尻赳镯殛 筢 溟妪桴眢"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local files"
-msgstr "燥痖贶 狁麇哚"
+msgid "Oman"
+msgstr "响茼"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Authentication"
-msgstr "虚篝镳镞珞"
+msgid "Network Monitoring"
+msgstr "嗅襻觑腼珞 拈牯"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"刘酎 犍溟挈 瘃忉箸 暹磲 痫臊 狃朦 (瘃蒺彘 磲 蓣彘 麸蹼荀轶麸 %d "
-"麽襻牯揆弪)"
+msgid "SunOS"
+msgstr "SunOS"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No password"
-msgstr "座襁 犍溟挈 瘃忉箸"
+msgid "New size in MB: "
+msgstr "洼 燧沐栾 箦 MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "戍溟挈 瘃忉箸 root"
+msgid "Partition table type: %s\n"
+msgstr "札痫 疬磲赆 赆翎綮摅妁: %s\n"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "腻 蓣弭 聃桁唧彘 麸 . 胚篝 廨忉轱  栎脲翦 磲 麸 贶礤翦;"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "震珩弩咤: %d 屙羼泔痫殓燧礤 汩 %d 邈沐泷犰燧礤"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services"
-msgstr "震珩弩咤"
+msgid "Authentication Windows Domain"
+msgstr "虚篝镳镞珞 燥燧 Windows"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "System"
-msgstr "育篝珈"
+msgid "US keyboard"
+msgstr "... (US)"
-#. -PO: example: lilo-graphic on /dev/hda1
#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "%s (三襻 %s)"
+#, c-format
+msgid "Buttons emulation"
+msgstr "旭矬镬镞 曙蹯痖"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "旭镢褴祆狒矧 尻赀礴箸"
+msgid ", network printer \"%s\", port %s"
+msgstr ", 尻趱瘗艮 溟牯 \"%s\", 椠襻 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Boot"
-msgstr "抨赀礴箸"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
+"\n"
+"鸟狍翮耖玺弪 Drakbackup 燧簌 翎轫哚:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "disabled"
-msgstr "狃屙羼泔痫殓燧盹"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" 遇茈灬 篝 簖礓弩 FTP . 腻 摁犴 漉磲艮 狃矬麸朕 豉 犴糸泷荟 "
+"狍鲠脲哚 燧簌 FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "activated"
-msgstr "屙羼泔痫殓燧盹"
+msgid "Sending Speed:"
+msgstr "葬鼾翮翎 琉矬麸朕:"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Firewall"
-msgstr "燥喵矧 旭矬翎筮狎"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Security"
-msgstr "馏鲕脲獒"
+msgid "Mail alert configuration"
+msgstr "妖桁轶 彘滹痫哏箸 葬黪漶镬暹秕"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Level"
-msgstr "硼唣邃 馏鲠脲哚"
+msgid "Tokelau"
+msgstr "燥赍胲秕"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network"
-msgstr "倪牯躏"
+msgid "Bosnian"
+msgstr "嘛箜哚"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Network & Internet"
-msgstr "倪牯躏 & 拈徜哧趱"
+msgid "Release: "
+msgstr "戈滹箸:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Graphical interface"
-msgstr "民狯殛 疱耖廛腚镯"
+msgid "Connection speed"
+msgstr "葬鼾翮翎 簖礓弩珧"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hardware"
-msgstr "针殛"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"嗅襻赆膻 彘筌沐翦 麸 镬 翮 篚箨艴掾 邈泷狯掾 CD\n"
+".. : 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "受耵 TV"
+msgid "Namibia"
+msgstr "歪爝祓獒"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"腻 怦蓁珀 贶耵 搠秕. 娘觊燔篝 麸 \"harddrake\" 戾糗 翮 邈赆糗篝狍"
+msgid "Database Server"
+msgstr "蓬躔珩弭玺掾 萝箸 腻滹燧睐"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-"抨翦胼篝 \"sndconfig\" 戾糗 翮 邈赆糗篝狍 汩 翮 颀桁轶 翮 贶耵狎"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "各弭 贶耵 搠秕 ISA;"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "腻 祓锺 磲 瘃矬栎簌 赆糗綮珞 篝 _祜聆镳镩珈蓓颻 RAID md%d"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Sound card"
-msgstr "受耵 搠秕"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 禳盹 戾 "
+"翎 XFree %s.\n"
+"醒嫌献: 信裳撂猎墒 招嫌郧焉吻 - 绦涎派 土 辛觅优 韵 招纤厦捎郧 恿!\n"
+" 贶耵 筢 躔矬翮襁驽翎 狃 翎 XFree %s 翎 镳镞 祓锺暹 磲 溥盹蹴 赆臊翦耒 "
+"躔矬艮耖铉 汩 溟溟荏翎翎 泷狯殛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "琉镬彡聃箪蓓矧 孱躔珩弭玺掾 CUPS"
+msgid "Please wait, setting security options..."
+msgstr "嗅襻赆膻 疱耖燧礤翦, 锺哝镯翎 镩 屦殡镢蒡 狍鲠脲哚..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No printer"
-msgstr "梳磔磲 尻趱瘗艮"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "躲睐篝飢CPH05X (bt878) [痫腚镞 赆翎箨艴狍糨騗"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Printer"
-msgstr "抨趱瘗艮"
+msgid "Launch the graphical environment when your system starts"
+msgstr "隋轸秕胥哚 泷狯殛稞 疱耖廛腚镯麸 赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse"
-msgstr "酗眙哧"
+msgid "hourly"
+msgstr "獒哚"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Timezone"
-msgstr "亳镫镢獒贽 掐礴"
+msgid " Successfuly Restored on %s "
+msgstr " 另彡翮桢 戾 屦轸貅哚 篝 %s "
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "须珀赳镫轱"
+msgid "Making printer port available for CUPS..."
+msgstr "眠盹眙衢 溟徼蒹殪弪 镩 椠皴 篝 CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Summary"
-msgstr "绣襁腌"
+msgid "Antigua and Barbuda"
+msgstr "另暨汴秕 赆 甜狁祓稞眙"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "蓬躔珩弭玺掾 NTP"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"\n"
+" 蓬躔珩弭玺掾\n"
+" 拈徙襻鲛 黢摅翮 蓬躔珩弭玺掾 屙羼泔痫哏箸."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "刘酎灬麸 篚泖耧黹箪 狎 (黢摅 NTP)"
+msgid "Spanish"
+msgstr "审疳黹挈"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "燥 耧朦 麸 躔镫镢轶艮 筢 暹磲 聃桁轶燧盹 箦 GMT ( 藐襁盹蹰趄)"
+msgid "Start"
+msgstr "抨赀礴箸"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "酗獒 暹磲 纩礴 狎;"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "柔 栎脶翦 磲 聃桁唧弭 蓓犴 尻趱瘗艮;"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "龄蹴犰哚 fork: %s"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "育礓弩 戾 麸 酎痫 汩 翮 朕 豉 溟徼蒹殪 疳贻豉..."
+msgid "Configuring applications..."
+msgstr "妖桁轶 弼狁祜泾..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "硼殡蓊翦 酎痫 狃 麸 镳镞 栳 氵礤 朕 疳贻豉"
+msgid "Normal modem connection"
+msgstr "琉朕 簖礓弩 戾 禳眙屐"
-# fuzzy
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"育礓弩 戾 翮 麸痫桢筮 翮 Mandrake Linux 汩 朕 豉 溟徼蒹殪 酎瘗 "
-"朕..."
+msgid "File Selection"
+msgstr "硼殡镢 榴麇唢"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"Which ISDN configuration do you prefer?\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
"\n"
-"Do you want to install the updates ?"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"轧襻 蓣弭 翮 漉磲酎翮翎 磲 邈赆翎篝摅弭 疳贻翎 犴徕荑扉箸. 刘糗 翎\n"
-"疳贻翎 蓣秕 犴徕徼扉篝暹 戾糗 翮 蓐滹箸 翮 溟犴镬掾. 甜锺暹 磲 疱耖蓣秕韁n"
-"溟锺棹箦轵 篥犭燔豉 犴徕徼爝箦轵 狍鲕脲獒.\n"
+"酗獒 ISDN 颀桁轶 瘃雉殪荇;\n"
"\n"
-"瞄 磲 贶礤翦 朕 狨酤 豉 疳贻豉 瘃蒺彘 磲 蓣弭 扉 簖礓弩 篝 "
-"拈徜哧趱颸n"
-"痫 磲 脲轸秕胥暹.\n"
+"* 疳腴 颀桁轶 黢珞殪镳镩暹 麸 isdn4net. 绣耖蓣彘 黢摅殪 羼汜脲哚,\n"
+" 犭胲 暹磲 脒泔 潺箨镫 汩 蓓犴 狁鬈耖 磲 聃桁轶翦 赆  篝羼妩趱痫.\n"
+"\n"
+"* 洼 颀桁轶 暹磲 艴觑朦翦耒 篝珥 赆翎睃珞, 疱耖篌羼 篝羼妩趱痃,\n"
+" 犭胲 戾 腴泓翦襻 羼汜脲哚.\n"
+"\n"
+"旭雉暹盹蹯 翮 咫狯耖 颀桁轶.\n"
"\n"
-"容脲翦 磲 邈赆翎篝摅弭 糸 犴徕徼爝箦轵 ;"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "嗅襻赆膻 彘筌沐翦 翮 溟箨蒴 另徕荑扉箸 榴桉荇 篝镯 镤玢 %s"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "嗅襻赆膻 彘筌沐翦 翮 溟箨蒴 抨赀礴箸 篝镯 镤玢 %s"
+msgid "Run config tool"
+msgstr "抨糨脲箸 羼汜脲唢 颀桁轶珧"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "氧桁唧彘 戾糗 翮 邈赆糗篝狍"
+msgid "Bootloader installation"
+msgstr "旭襻祆 尻赀礴箸"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"陪赆糗篝狍 疳贻麸 %s\n"
-"%d%%"
+msgid "Root partition size in MB: "
+msgstr "梯沐栾 忉箝贽 赆糗綮珞珧 篚篝揿狒矧 箦 MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "旭镥麸殪狍哚 邈赆糗篝狍珧"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "刘酎 暹磲 狃衢麸屙 疳贻麸, 溴 祓锺暹 磲 狃镥痖脲沐"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom 镯狒 \"%s\""
+msgid "Etherboot ISO image is %s"
+msgstr " 彘挈磲 Etherboot ISO 暹磲 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
msgstr ""
-"跑 蓣弭  翎 疳襻贶豉 CDs, 疳艮篝 彭糗铄.\n"
-"跑 溴 蓣弭 赆磔磲 狃 翎 疳襻贶豉 CDs, 疳艮篝 陵.\n"
-"跑 溴 蓣弭 贶痫獒 狃 狨糗, 狃镥痖胼铘 翎 赆 疳艮篝 彭糗铄."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "茧"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "旭徙灬糸贶 咫荀轶翮 邈赆糗篝狍 (彘溟贶 鼯襁 urpmi)"
+" named (BIND) 暹磲 蓓狎 蓬躔珩弭玺掾 享狒矧 燥燧 (DNS) 痫 "
+"黢珞殪镳镩暹翎閈n"
+"汩 磲 戾翎赳蒺彘 镯狒 箦 溟艴椠眢彘 IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "体 翮 忉箝贽 翦觎珩啭箸 (篚黹篝荇衢!)"
+msgid "Disconnect..."
+msgstr "琉矬溴箸..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With X"
-msgstr "体 "
+msgid "Saint Lucia"
+msgstr "躲轱 孙蹶茯"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"腻 蓣弭 屦殡蓊彘 镬茕 疳贻豉.\n"
-"嗅襻赆膻 屦殡蓊翦 翮 咫荀轶翮 邈赆糗篝狍 痫 栎脲翦:"
+msgid "Report"
+msgstr "另狯锺"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type of install"
-msgstr "札痫 邈赆糗篝狍珧"
+msgid "Palau"
+msgstr "嗅胲秕"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "燥 屦殡邈燧盹 燧沐栾 暹磲 戾汜臊翦耧 狃 麸 溟徼蒹殪 齄耧"
+msgid "level"
+msgstr "屦唣邃"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "砰筌沐翦 溟箨蒴 痫 疱耖蓣彘 翮 屦殡镢 疳贻豉"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, fuzzy, c-format
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr "茧."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "诛耵弭衢 狃 溟箨蒴"
+msgid "Package Group Selection"
+msgstr "硼殡镢 响茕 嗅贻豉"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Package selection"
-msgstr "硼殡镢 疳贻豉"
+msgid "Restore Via Network Protocol: %s"
+msgstr "硼犴狯锺 梯簌 旭镫腼 拈牯: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "琉镨揸艴箸 箦 溟箨蒴"
+msgid "You can configure each parameter of the module here."
+msgstr "配 祓锺暹翦 磲 聃桁唧弭 糸 疳襻燧赳秕 麸 狁桉狒矧."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "贮耵 狃 溟箨蒴"
+msgid "Choose the resolution and the color depth"
+msgstr "硼殡蓊翦 犴茈躞 赆 廛栾 黢狒矧"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 翮 鳇耵 狃镨揸艴箸 豉 屦殡镢掾 疳贻豉 篝 溟箨蒴.\n"
-" 祜聆镳镞珞 暹磲 咪獒 戾 糸 溟箨蒴弪 狨酎灬翮 邈赆糗篝狍珧."
+msgid "Emulate third button?"
+msgstr "蓬镬镞 赳唪秕 痣揸赳秕;"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"腻 屦蒽彘礤 狁赍酎 齄耧 篝 簖篝珈 筢 汩 邈赆糗篝狍 犴徕荑扉箸 (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "剀黜 汩 溟徼蒹殪 疳贻翎..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "另徭摁珞 疳贻豉 瘃矧 犴徕荑扉箸..."
+"磔颸n"
+" 瘃妪秕筢\n"
+" 瘃妪秕筢."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "剀黜 汩 掬 邈赆翦篝珈蓓 疳贻翎..."
+msgid "Mount"
+msgstr "育礓弩"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "剀黜 汩 溟徼蒹殪 疳贻翎 赆 溏扉秕胥 钺碥 翮 廛箸 溴滹燧睐 rpm..."
+msgid "Creating auto install floppy"
+msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"腻 躔荞麇 狁赍酎 齄耧 swap 汩 翮 镫镪朕聩箸 翮 邈赆糗篝狍珧, 疳襻赆膻 "
-"瘃矬栎篝"
+msgid "Install updates"
+msgstr "另徕徼爝箦轵"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"琉蒴貅 蓦邈黠 麸 篚篝揿狒矧 狁麇啭 %s. 容脲翦 磲 屦轶赍踯箦翦 翎 "
-"篥茈灬翎; (瘃矬秣, 祓锺暹 磲 鬈箦翦 溴滹燧磲)"
+msgid "text box height"
+msgstr "矧 痣衢筮秕 赍殪蓓秕"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "鸽邈黠 汩 麽脶箪蓓 綮揿狒;"
+msgid "State"
+msgstr "梳糗篝狍:"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "硼殡蓊翦 赆翎綮摅彘 瘃矧 祜聆镳镞珞"
+msgid "Be sure a media is present for the device %s"
+msgstr "娱泔躐艴翦唪 瘗 蓓 燧箫 暹磲 疳顸 汩 翮 篚箨艴 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"琉衢翦唪衢 屦犴尻赀礴箸 汩 磲 屙羼泔痫殓栾 镩 犭脶爿 篝镯 疬磲赆 "
-"赆翎綮摅妁"
+msgid "Enable multiple profiles"
+msgstr "彭羼泔痫哏箸 痫腚狃膻 瘃秭唠"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"腻 躔荞麇 咫妪桢耧 齄耧 汩 1MB bootstrap! 邈赆糗篝狍 栳 篚礤鏖篝暹, "
-"犭胲 汩 磲 铄觊磙箦翦 麸 簖篝珈 筢, 栳 黢彘狍翦 磲 溏扉秕胥摅弭 扉 "
-"赆糗綮珞 bootstrap 戾 麸 DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "硼殡蓊翦 箸戾哚 簖礓弩珧"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "另茈躞 赆翎綮摅妁 汩 瘃矬溟锺轶禳 箸戾啭 簖礓弩珧."
+"刘糨 镩 屦殡镢蒡 祓锺稞 磲 疖耧蹴 犴暨泷狯 狍鲠脲哚 赆 磲 屦犴狯蓠秕 "
+"麸 /etc\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No partition available"
-msgstr "溴 躔荞黠蹴 溟徼蒹殪弪 赆翎綮摅彘"
+msgid "Local printer"
+msgstr "燥痖挈 尻趱瘗艮"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "妖桁轶 IDE"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Package selection"
+msgstr "硼殡镢 疳贻豉"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "妖桁轶 赆耵 PCMCIA ..."
+msgid "Mauritania"
+msgstr "提躐轸犴哚"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"甜锺 磲 犟狒摅 糸 赳蓣秕箦 聃桁唧彘 赆 磲 躔镨蒹  掬 蓣彘 "
+"聃桁轶翦 孱躔珩弭玺掾 DHCP, 疳襻赆膻 咫葶铘 遘 蓣 溟徕荏彘 簌篝 麸 "
+"倪牯躏 痫 黢珞殪镳镩暹翦 汩 麸 麸痖挈 筢 溥牯躏, 溴 栳 疱轳茴 栳 "
+"犭胲铢 糸 聃桁唧彘 麸 孱躔珩弭玺 DHCP.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "旭矬镬镞 3 曙蹯痖"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"腻 怦蓁珀犴 麸痖觑 尻趱瘗糨! 瞄 磲 聃桁唧弭 禳盹 筢 蓓犴 尻趱瘗艮 "
+"濑篝 麸 镬 尻趱瘗艮/镬 狁麇唢 篝 泷犰燹 彘筢泫戕 (嗅褴腚珉弪 "
+"椠皴: /dev/lp0, /dev/lp1, ..., 犴暨篝镩麇 豉 LPT1:, LPT2:, ..., 1矧 "
+"尻趱瘗艮 USB: /dev/usb/lp0, 2矧 USB 尻趱瘗艮: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "旭矬镬镞 2 曙蹯痖"
+msgid "All primary partitions are used"
+msgstr "茧弪 镩 瘃妪秕箦 赆翎綮摅彘 暹磲 箦 黢摅"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "旭矬镬镞 曙蹯痖"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"瘤稞 氵礤 狨酎, 瘃雉暹盹蹯 磲 屦犴尻觊磙箦翦 麸 疱耖廛腚镯 汩 磲 "
+"狃秭弭 翎 瘃镡朕灬翎 犭脶戕 溟牯踽觑 镯狒矧."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
+msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 箦轳獒贽 椠襻 篝珥 镳镞 暹磲 篚礓邃屐蓓 麸 痫眙哧 筢."
+"刘酎灬翮 犴喵礤躞 赆 颀桁轶 篚箨艴 赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Mouse Port"
-msgstr "三襻 痫眙殛轱"
+msgid "Installation Server Configuration"
+msgstr "陪赆糗篝狍 氧桁唧妁 拈彡镬轶艮"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "嗅襻赆膻 屦殡蓊翦 酏痫 痫眙殛轱."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "孰彘溥 犟躔麸泷荟珞珧"
+msgid "Configuring IDE"
+msgstr "妖桁轶 IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "另徕荑扉箸 %s"
+msgid "Network functionality not configured"
+msgstr " 脲轸秕胥殛玺 麸 溟牯 溴 聃桁唧翮赍"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "旭彘翎 汩 邈赆糗篝狍 汩 犴徕荑扉箸;"
+msgid "Configure module"
+msgstr "妖桁轶 狁桉狒矧"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "陪赆糗篝狍/另徕荑扉箸"
+msgid "Cocos (Keeling) Islands"
+msgstr "娃箫 庶觑 (兽腴磴)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "刘艮 暹磲 痣揆珧 脒篝 豉 溟徼蒹殪 痣珀赳镫镢啭"
+msgid "Disconnecting from the Internet "
+msgstr "琉矬溴箸 狃 麸 拈徜哧趱"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 溟荇犷 痣珀赳镫镢唢."
+msgid "You'll need to reboot before the modification can take place"
+msgstr "琉衢翦唪衢 屦犴尻赀礴箸 汩 磲 弼狁祜篝稞 镩 犭脶爿"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Quit"
-msgstr "割镤矧"
+msgid "Provider phone number"
+msgstr "榴殍禳 翮脲鳋盹 疳耧鬏"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "柬镬 篚篝揿狒矧"
+
+#: ../../lang.pm:1
#, c-format
-msgid "License agreement"
-msgstr "朵彘 黢摅珧"
+msgid "Armenia"
+msgstr "榴戾磉"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "旭镪朕桤赍 篥茈灬"
+msgid "Fiji"
+msgstr "诌翩"
-#: ../../install_steps_newt.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-" <Tab>/<Alt-Tab> 岭脶戕 疱溥秕 | <Space> 屦殡镢 | <F12> 屦屙 镨"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "陪赆糗篝狍 Mandrake Linux %s"
-#: ../../install_steps.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "腻 躔荞麇 溟徼蒹殪矧 镤玢 溟箨蒴狎"
+msgid "Second floppy drive"
+msgstr "腻羼矧 镤玢 溟箨蒴狎"
-#: ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to %s"
-msgstr "梳膻 锺唧狒 篝 %s"
+msgid "About Harddrake"
+msgstr "喻弭殛 戾 麸 Harddrake"
-#: ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+msgid "Drive capacity"
msgstr ""
-"体耖贶 箸灬眙殛 疳贻翎 溴 邈赆翎篝荑珀犴 簌篝.\n"
-" 镤玢 CD-ROM 麸 CD-ROM 暹磲 咫狒豉灬糸挈.\n"
-"烹葶铘 麸 CD-ROM 箦 蓓 茈腼 簖篝珈 黢珞殪镳镩翎 翮 屙麸朕 \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "拈痣 箸戾唢 簖礓弩珧 %s"
-
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"旭镪朕桤赍 蓓 篥茈灬 痫 溴 钶聩 瘙 磲 麸 麇轳轶酤.\n"
-"吁礤鬟篝 戾 溟贽 筢 艴椠礴."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "嗅襻赆膻 疱耖燧礤翦"
+"砰筌沐翦 扉 溟箨蒴 篝镯 镤玢 溟箨蒴狎\n"
+"茧 翎 溴滹燧磲 箦 狨艮 翮 溟箨蒴 栳 麽栾"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ok"
-msgstr "彭糗铄"
+msgid "Size: %s"
+msgstr "梯沐栾: %s"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finish"
-msgstr "暂腼"
+msgid "Control and Shift keys simultaneously"
+msgstr "葬豸耧磲 翎 痣揸赳 Control 赆 Shift"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Basic"
-msgstr "箩箝贽"
+msgid "secondary"
+msgstr "溴豸羼妪秕筢"
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Advanced"
-msgstr "瞄 旭秣珈蓓秕"
+msgid "View Backup Configuration."
+msgstr "旭镡镫 氧桁唧妁 另糸泷荟 馏鲠脲哚"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove"
-msgstr "瘤徇皴箸"
+msgid "if set to yes, report check result to syslog."
+msgstr "犴 锺轶翦 磲, 狃雉蓦弩灬 犴狯锺茯 咫葶黠 篝 syslog."
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Modify"
-msgstr "择镳镳镞珞"
+msgid "No password"
+msgstr "座襁 犍溟挈 瘃忉箸"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add"
-msgstr "旭矬柁赙"
+msgid "Nigeria"
+msgstr "烷沌襁"
-#: ../../interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "硼殡蓊翦 蓓 狁麇唢"
+msgid "There is no existing partition to use"
+msgstr "腻 躔荞黠蹴 赆翎綮摅彘 瘃矧 黢摅"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"配 祓锺暹翦 磲 屦殡蓊弭 麸 痣揸赳 麸 篚礓踽箪黒n"
-"痣揸赳 屙犭脶戕 豉 溟狒茴妁 痣珀赳镫镢啭韁n"
-"(.. 零汶殛 烹腌黹贽)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "腻铋 痣揸赳 \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "榴轶翦顸 痣揸赳 \"Windows\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "须揸赳 \"体盹齖""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "葬豸耧磲 翎 痣揸赳 Alt 赆 Shift"
+"祥 疳襻贶豉 筢聩糨騖n"
+"\n"
+"%s\n"
+"暹磲 溟徼蒹殪镩 篝 簖篝珈 筢騖n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "葬豸耧磲 翎 痣揸赳 Ctrl 赆 Alt"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"瞄 磲 尻趱瘙箦翦 箦 蓓犴 尻趱瘗艮 socket TCP , 瘃蒺彘 磲 濑箦翦 麸 \n"
+"溟牯踽挈 镬 麸 尻趱瘗艮 赆 瘃镝轳弭殛 麸 狁殍禳 椠襻 ( 孱 锺轶祜 "
+"9100). 郁秕 孱躔珩弭玺蒡 HP JetDirect 椠襻 篚磙棂 暹磲 9100, 箦 茈腼躜 "
+"孱躔珩弭玺蒡 痫殛唠. 腻唪 麸 邈麇轳咪轱 黢摅珧 麸 蹼殛稞 筢."
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "须揸赳 Capslock"
+msgid "Hard drive information"
+msgstr "须珩秭锺咤 箨腌耧 溥箨秕"
#: ../../keyboard.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "葬豸耧磲 翎 痣揸赳 Control 赆 Shift"
+msgid "Russian"
+msgstr "样箝挈"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "葬豸耧磲 翎 潺 痣揸赳 Shift"
+msgid "Jordan"
+msgstr "娠皲犴哚"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "腻铋 痣揸赳 Alt"
+msgid "Hide files"
+msgstr "琉聃 狁麇啭"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "瞄秕汴矬脶忾挈 (脶糸黹挈)"
+msgid "Auto-detect printers connected to this machine"
+msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤 篚礓屐蓓镩 箦 狨酎 麸 扃鬈礴灬"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "麻弭碥 \"numeric row\" QWERTY"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"燥 XawTV 溴 暹磲 邈赆翦篝珈蓓!\n"
+"\n"
+"\n"
+"另 蓣弭 贶耵 早脲狍珧 犭胲 麸 DrakX 溴 翮 怦揸 (鼯襁 bttv\n"
+"module 篝 \"/etc/modules\") 赆 溴 邈赆糨篝珞 稞翦 麸 xawtv, 疳襻赆膻\n"
+"篝暹媵 翎 狃雉蓦弩灬 麸 \"lspcidrake -v -f\" 篝 \"install\\@mandrakesoft."
+"com\"\n"
+"戾 栎灬 \"undetected TV card\".\n"
+"\n"
+"\n"
+"甜锺暹翦 磲 邈赆翎篝摅弭 麸 xawtv 戾 翮 屙麸朕 \"urpmi xawtv\" 筢韁n"
+"root, 狃 翮 觑眢."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US 溟彖磔"
+msgid "Sorry, no floppy drive available"
+msgstr "缩疖灬, 溴 躔荞麇 溟徼蒹殪矧 镤玢 溟箨蒴狎"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "... (US)"
+msgid "Bolivia"
+msgstr "嘛腴膺"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "体丬腌 埋弭犴哚 (UK)"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"氧桁唧翦 麸 孱躔珩弭玺 Windows 翦 磲 暹磲 溟徼蒹殪矧 尻趱瘗艮 篝 "
+"瘃镫腼 IPP 赆 聃桁唧翦 糸 尻趱瘙箦轵 狃 狨酎 麸 扃鬈礴灬 戾 麸 酏痫 "
+"簖礓弩珧 \"%s\" 篝 Printerdrake.\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "硝犟犴殛"
+msgid "Bad package"
+msgstr "塑栾 疳贻麸"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "燥躐觊挈 (祜眙蓠盹 \"Q\" 祜眙蓦)"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"体翎祜聆翦 麸 扃鬈礴燔 筢 箦 蓓犴 漉磲酎 溟彡镬轶艮 Linux 戾 戾耖贶 觌殛 "
+"麸躔镯糸觊稞 筢: 拈彡镬轶艮 审麸, 翎黪漶镬暹秕, 漶镬镫镢玺掾, "
+"孱躔珩弭玺掾 狁麇啭 赆 尻趱瘗酤, ..."
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "燥躐觊挈 (疳襻滹箝彡 \"F\" 祜眙蓦)"
+msgid "DrakSec Basic Options"
+msgstr "箩箝贻 硼殡镢蒡 DrakSec"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Tajik keyboard"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
msgstr ""
+"\n"
+"\n"
+"\n"
+"隅戾啭箸: 另 蓣弭 贶耵 搠秕 ISA PnP, 栳 瘃蒺彘 磲 尻翦胼箦翦 麸 瘃襻祆 "
+"sndconfig. 琉胲 泷茗翦 \"sndconfig\" 箦 扉 觑眢."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "葬犴漭骈觑"
+msgid "Romania"
+msgstr "扬蹯犴哚"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "葬扉腴挈 (溟荇犷 泷狯镬琪犴)"
+msgid "choose device"
+msgstr "硼殡蓊翦 篚箨艴"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "葬扉腴挈 (溟荇犷 ISCII)"
+msgid "Canada"
+msgstr "梳磲滠"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "虞疋殛 (牾耖腚殛)"
+msgid "Remove from LVM"
+msgstr "瘤徇皴箸 狃 麸 LVM"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "与镡彡哚 (QWERTY)"
+msgid "Timezone"
+msgstr "亳镫镢獒贽 掐礴"
#: ../../keyboard.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "与镡彡哚 (QWERTZ)"
+msgid "German"
+msgstr "缅耢犴殛"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "与镡屙哚"
+msgid "Next ->"
+msgstr "硼屙 -"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swedish"
-msgstr "语蹒溟挈"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian (Yawerty)"
-msgstr "样箝挈 (Yawerty)"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"\n"
+" 箱玢\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Russian"
-msgstr "样箝挈"
+msgid "Guinea-Bissau"
+msgstr "蔑斛磔-甜轶茱"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "扬蹯犴殛 (qwerty)"
+msgid "Horizontal refresh rate"
+msgstr "吁黜玺 锺殒糸狎 犴犴甍箸"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "扬蹯犴殛 (qwertz)"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"腻 祓锺 磲 狯衢褫簌 麸 箸戾唢 簖礓弩珧 赆棹 狨艮 赆糗綮珞 "
+"黢珞殪镳镩暹翎閈n"
+"汩 loopback. 瘤衢褫篝 瘃 麸 loopback"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "梳磲溟挈 (叔祓蓐)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+" 颀桁轶 溟牯 痫 葶轫 赆糗 翮 溟荞赍獒 翮 邈赆糗篝狍珧 溴 摁犴 "
+"漉磲酎 磲 尻觊礴桢. 嗅襻赆膻 咫葶铘 遘 麸 溥牯躏 暹磲 瘃矬廛箝祜 戾糗 "
+"翮 尻赀礴箸 赆 溟锺棹篝 糸 聃桁唧彘 戾 翮 黢摅 麸 瘦眙耧 烹葶黠 "
+"翮 Mandrake, 篝 綮揿 \"倪牯躏 & 拈徜哧趱颸" / \"育礓弩鏫" 赆 戾糗 "
+"聃桁唧翦 麸 尻趱瘗艮 屦唧珧 戾 麸 瘦眙耧 烹葶黠 Mandrake 篝 綮揿 \"针殛"
+"\"/\"抨趱瘗艮騖""
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "酗耵镢犭殛"
+msgid "USB controllers"
+msgstr "烹邈牯蒡 USB"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "酗膣黹挈 (溟荇犷 qwertz)"
+msgid "What norm is your TV using?"
+msgstr "酗轱 簖篝珈 黢珞殪镳镩暹 翮脲狍 筢;"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "酗膣黹挈 (溟荇犷 qwerty)"
+msgid "Type:"
+msgstr "札痫:"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "惋疋玢殛"
+msgid "Share name"
+msgstr "柬镬 瘘耧:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dutch"
-msgstr "想脶礓殛"
+msgid "enable"
+msgstr "屙羼泔痫哏箸"
-#: ../../keyboard.pm:1
+# fuzzy
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Maltese (US)"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
+"育礓弩 戾 翮 麸痫桢筮 翮 Mandrake Linux 汩 朕 豉 溟徼蒹殪 酎瘗 "
+"朕..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
+"疙 瘃腌灬 屐鲠磉篝珀 赆糗 翮 屦犴尻赀礴箸 麸 溟牯: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "田沣镫殛 (术耖腚殛)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Myanmar (Burmese)"
-msgstr "涕犴燔"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "提赍滹黹挈 . ."
+msgid "Remove the loopback file?"
+msgstr "歪 狯衢皴桢 麸 狁麇唢 loopback;"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "提脶汩犭犰殛"
+msgid "Selected size is larger than available space"
+msgstr "燥 屦殡邈燧盹 燧沐栾 暹磲 戾汜臊翦耧 狃 麸 溟徼蒹殪 齄耧"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latvian"
-msgstr "隋麸黹挈"
+msgid "NCP server name missing!"
+msgstr "燥 镬 麸 孱躔珩弭玺 NCP 脲唣彘!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "碎栾踽黹挈 \"鳄礴糸挈\" QWERTY"
+msgid "Please choose your country."
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 齄襻 筢."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "碎栾踽黹挈 \"number row\" QWERTY"
+msgid "Hard Disk Backup files..."
+msgstr "另暨泷狯 馏鲠脲哚 雨腌耧 倪箨秕"
#: ../../keyboard.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "碎栾踽黹挈 AZERTY (磔)"
+msgid "Laotian"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "碎栾踽黹挈 AZERTY (疳腴)"
+msgid "Samoa"
+msgstr "俞禳"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Laotian"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
+"燥 瘃镫腼 rstat 屦轸褫疱 篝秕 黢摅翦 屙 溟牯 翮韁n"
+"篚腚镢 戾赳摅妁 屦殇妁 汩 镳镩镤摒雉 簖篝珈 箦 狨酎 \n"
+"麸 溥牯躏."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Latin American"
-msgstr "酸糸黹贽 领羼殛掾"
+msgid "Re-generating list of configured scanners ..."
+msgstr "硼犴徜珈轱躐氵 脒篝狎 戾 麸躜 聃桁轶燧盹躜 筢聩糨 ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "曙皴荇殛 须珀赳镫轱"
+msgid "Scanner"
+msgstr "俞聩艮"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "舍瘗黹挈 106 痣揸赳"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr ""
+"旭矬秣: 滹觊燹 箦 狨艮 翮 贶耵 泷狯殛 祓锺暹 磲 疳泾箦 麸 "
+"躔镫镢轶艮 筢"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Inuktitut"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
+"燥 犍溟挈 镬 祓锺暹 磲 疱耖蓣彘 禳盹 疱孳 泷莒灬翎, 狁殍祜, `-' 赆 `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Italian"
-msgstr "婶犭殛"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "审脶礓殛"
+msgid "Welcome To Crackers"
+msgstr "梳膻 锺唧狒 篝秕 Crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Iranian"
-msgstr "神犴殛"
+msgid "Module options:"
+msgstr "硼殡镢蒡 狁桉狒矧:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "审襻揠 (鳄礴糸挈)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Israeli"
-msgstr "审襻揠"
+msgid "Go on without configuring the network"
+msgstr "吁磔鏖箸 鼯襁 翮 颀桁轶 麸 溟牯"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Croatian"
-msgstr "蜀镝糸挈"
+msgid "Abort"
+msgstr "陵"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "硝沣耖挈"
+msgid "No password prompt on %s at port %s"
+msgstr "座襁 羼珞 犍溟觑 篝 %s 篝 椠襻 %s"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Gurmukhi"
-msgstr "藐秕耢稞觊"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "篚箨艴."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Gujarati"
-msgstr "藐秕翩狁狒殛"
+msgid "Usage of remote scanners"
+msgstr "遵摅 豉 狃镬彡聃箪蓓 筢聩酤"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Greek"
-msgstr "烹腌黹挈"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "缅氵 (\"酸糸黹贽\" 溟荇犷)"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+" 赆糗綮珞 豉 Windows 暹磲 痫臊 赆翎赍耢狒轶燧礴, 疳襻赆膻 赳蓊翦 瘃 "
+"麸 ``defrag'' 燧筢 狃 翎 Windows 赆 铄觊磙篝 钺碥 翮 邈赆糗篝狍 麸 "
+"Mandrake Linux "
#: ../../keyboard.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "缅氵 (\"瑶箝赙\" 溟荇犷)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (惋疋玢殛)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "French"
-msgstr "冕腚殛"
+msgid "Hard Disk Backup Progress..."
+msgstr "拈徜殛狍哚 另糸泷荟 狍鲠脲哚 篝镯 雨腌顸 倪箨..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Finnish"
-msgstr "珠黼犴溟挈"
+msgid "Unable to fork: %s"
+msgstr "龄蹴犰哚 fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "审疳黹挈"
+msgid "Type: "
+msgstr "札痫: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "朋栾黹挈"
+msgid "<-- Edit Client"
+msgstr "<-- 硼孱羼汜筮 绣胲翮"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (语蹒溟挈)"
+msgid "no fonts found"
+msgstr "溴 怦蓁珀犴 泷犰灬麸箦轳蒡"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (惋疋玢殛)"
+msgid "Mouse"
+msgstr "酗眙哧"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (切)"
+msgid "not enough room in /boot"
+msgstr "溴 躔荞麇 狁赍酎 齄耧 篝 /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Danish"
-msgstr "尼黹挈"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "腻忉磲汜耖挈"
+msgid "Host name"
+msgstr "柬镬 篚篝揿狒矧"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "缅耢犴殛 (鼯襁 礤犟 痣揸赳)"
+msgid "Liechtenstein"
+msgstr "碎黥屙篝荛"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "German"
-msgstr "缅耢犴殛"
+msgid "the color of the progress bar"
+msgstr "燥 黢 翮 泷犰燹 瘃稂滹"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "泽蓣殛 (QWERTY)"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "泽蓣殛 (QWERTZ)"
+msgid "Add to RAID"
+msgstr "旭矬柁赙 篝 RAID"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Swiss (French layout)"
-msgstr "烹忮糸挈 (冕腚殛 溟荇犷)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+" 鹏殛蒴醆n"
+"\n"
+"\n"
+" 砰挈磲\n"
+"\n"
+"\n"
+" Root 篚箨艴 Linux\n"
+"\n"
+"\n"
+" 屙羼泔痫哏箸\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Initrd\n"
+" 篚箨艴轡n"
+"\n"
+"\n"
+" Initrd 孱' 锺轶祜齖n"
+"\n"
+" 孱' 锺轶祜齖n"
+"\n"
+"\n"
+"\n"
+" 孱' 锺轶祜齖n"
+"\n"
+" 座襁騐ideo\n"
+"\n"
+"\n"
+"\n"
+" 旭镥痖脲沆蓓 孱' 锺轶祜 Linux\n"
+"\n"
+"."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "烹忮糸挈 (缅耢犴殛 溟荇犷)"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+" 尻趱瘗艮 \"%s\" 瘃矬糨桤赍 戾 屦轸貅哚 篝 Star Office/OpenOffice.org/GIMP"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Belarusian"
-msgstr "隋蹶锺哚"
+msgid "No floppy drive available!"
+msgstr "腻 躔荞麇 溟徼蒹殪矧 镤玢 溟箨蒴狎!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Bosnian"
-msgstr "嘛箜哚"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"瞄 磲 燔桢翦 疱耖篌羼 汩 糸 溟徼蒹殪弪 屙麸胼 汩 麸 赳蓣镯 尻趱瘗艮 "
+"溟徕荏翦 翮 脒篝 痫 鲠唔弭 疳襻贶豉 贶眙 觌殛 篝 \"抨酏瘗箸 脒篝狎 "
+"屦殡镢\"%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "埋徭殡檐黹觑 (ABNT-2)"
+msgid "Continue anyway?"
+msgstr "歪 篚礤鬟簌;"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "嘛蹼汜耖挈 (BDS)"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+" 尻趱瘗艮 筢 溴 躔荞麇 篝 脒篝, 疳襻赆膻 溟犭蓊翦 蓓犴 篚焘狒 蓓犴 "
+"疳顸祜轱 尻趱瘗艮."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "嘛蹼汜耖挈 (鳄礴糸挈)"
+msgid "Printer"
+msgstr "抨趱瘗艮"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bengali"
-msgstr "洛沣犭殛"
+msgid "Saudi Arabia"
+msgstr "俞秕溟贽 榴徕哚"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Belgian"
-msgstr "洛脬殛"
+msgid "Internet"
+msgstr "拈徜哧趱"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "伶羼祓狷翩茼 (酸糸黹挈)"
+msgid "Some devices were added:\n"
+msgstr "像轶燧礤 篚箨艴蒡 瘃矬糨桤赆:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "榴徕殛"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "缅弭襁: %s 挲腴礓耧, %s 赍鲠胼, %s 麸戾唑\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "榴戾黹挈 (鳄礴糸挈)"
+msgid "Printing on the printer \"%s\""
+msgstr "抨酏瘗箸 篝镯 尻趱瘗艮 \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "榴戾黹挈 (泷狯镬琪犴)"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"麸 /etc/hosts.allow 赆 /etc/hosts.deny 蓣秕 掬 聃桁轶翦 - 溴 "
+"戾翎赳莛珀犴"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Armenian (old)"
-msgstr "榴戾黹挈 (疳腴)"
+msgid "Restore From Tape"
+msgstr "硼犴狯锺 琉 葬轫哚"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Albanian"
-msgstr "岭忉黹挈"
+msgid "Choose the profile to configure"
+msgstr "硼殡蓊翦 麸 瘃秭唠 汩 颀桁轶"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish"
-msgstr "酗膣黹挈"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"\n"
+" 孱' 锺轶祜."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Backup Now from configuration file"
+msgstr "溺扉秕胥哚 另糸泷荟 馏鲠脲哚 狃 麸 狁麇唢 聃桁唧妁"
-#: ../../lang.pm:1
-#, c-format
-msgid "Zimbabwe"
-msgstr "崎祓莒痫蹂"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"燥 镬 麸 尻趱瘗艮 瘃蒺彘 磲 疱耖蓣彘 禳盹 泷莒灬翎, 狁殍祜 赆 麸 "
+"麽襻牯揆 underscore"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zambia"
-msgstr "栖祓獒"
+msgid "Restarting printing system..."
+msgstr "硼犴尻赀礴箸 麸 篚篝揿狒矧 尻酏瘗箸..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "South Africa"
-msgstr "忘糸矧 瘤耖贽"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"\n"
+"\n"
+" 旭矬柁赙."
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Serbia"
-msgstr "渝疋哚"
+msgid "See hardware info"
+msgstr "旭镡镫 痣珩秭锺辋 蹼殛稞"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "提汩"
+msgid "First sector of boot partition"
+msgstr "旭矧 麸燧狎 翮 赆糗綮珞珧 尻赀礴箸"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "斟燧礴"
+msgid "Printer manufacturer, model"
+msgstr "梳翎箨艴狍艮 尻趱瘗艮, 祜眙蓦"
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Samoa"
-msgstr "俞禳"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../lang.pm:1
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "娃箫 蔑踯腴 赆 诛豸稞磲"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"\n"
+" 蓬躔珩弭玺掾\n"
+" 屙羼泔痫哏箸 屙羼泔痫哏箸\n"
+" 狃屙羼泔痫哏箸 狃屙羼泔痫哏箸\n"
+"\n"
+"\n"
+" 黢摅翮騖n"
+" 拈徙襻鲛 黢摅翮騖n"
+"\n"
+" 拈徙襻鲛"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Vanuatu"
-msgstr "箩盹踯麸"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Vietnam"
-msgstr "麻弭碥"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "硼轸貅掾 邈赆糗篝狍 桢燔豉 LiLo 赆 Bootsplash"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "嗅耔蓓镩 娃箫(领羼殛犴殛蒡)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"祥 潺 犟唧殪弪 疳褴戾赳镩 暹磲 篚黜玺 赆翎挈聃鲧 犴犴甍箸 暹磲 鏫n"
+"篚黜玺 戾 翮 镳镞 犴犴妣礤翎 镫腌耒 镨, 赆棹 赆 篚黜玺醆n"
+"锺殒糸狎 犴犴甍箸, 镳镞 暹磲 篚黜玺 戾 翮 镳镞 犴犴妣盹眙衢\n"
+"镩 锺殒糸弪 泷犰燧.\n"
+"\n"
+"胚磲 邢苏 忧塘驮墒 磲 扃 屦殡蓊弭 酏痫 镨珧 麸 镳镞秕 镩 篚黜玺弪\n"
+"犴犴甍箸 暹磲 尻酎 豉 锺啭 翮 镨珧 筢: 躔荞麇 赀礓蹴矧 "
+"赆翎篝耧鲛騖n"
+"翮 镨珧 筢. 另 溴 暹篝 筮泔躐镩, 贶眙 扉 篚眙珩玺殛 屦殡镢."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "嗅耔蓓镩 娃箫(埋弭犴殛蒡)"
+msgid "Modify"
+msgstr "择镳镳镞珞"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "洛礤骘踺脶"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+" 硼唧珧 镩 屙麸胼 \"%s\" 赆 \"%s\" 筢 屦轸褫痫蹴 磲 锺唧弭 糸 聃桁唧彘 "
+"屦殡镢 汩 扉 篚汴尻耖燧礴 羼汜筮 尻酏瘗箸. 琉胲 瘃矬栎篝 糸 "
+"屦殍蹯玺蒡 聃桁唧彘 狃 翮 泷犰燹 屙麸膻, .. \"%s <狁麇唢>\".\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "躲轱 麻贻眙轱 赆 民屙犴暨礤"
+msgid "Need hostname, username and password!"
+msgstr "遵彘苕弭衢 麸 溟牯踽挈 镬, 镬 黢摅翮 赆 犍溟挈 瘃忉箸!"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "隋麸黹挈"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"孱躔珩弭玺掾\n"
+" 孱躔珩弭玺掾\n"
+" 孱躔珩弭玺掾\n"
+" 洼."
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Uzbekistan"
-msgstr "硝骒疱觊篝茼"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "硝耧蹉秕茜"
+msgid "new"
+msgstr "磔"
-#: ../../lang.pm:1
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "涕犟 狃镬镯蓓 礴箝 琼蓓 酗腴翦辋"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "柔 栎脶翦 磲 聃桁唧弭 蓓犴 尻趱瘗艮;"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Uganda"
-msgstr "硝汴茼翎"
+msgid "Wizard"
+msgstr "箱玢"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "硝犟犴哚"
+msgid "Edit selected server"
+msgstr "硼孱羼汜筮 屦殡邈燧盹 孱躔珩弭玺"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tanzania"
-msgstr "葬礞犴哚"
+msgid "Please choose where you want to backup"
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 栎箸 豉 犴糸泷荟 狍鲠脲哚"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Taiwan"
-msgstr "葬茼"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"琉衢翦唪衢 屦犴尻赀礴箸 汩 磲 屙羼泔痫殓栾 镩 犭脶爿 篝镯 疬磲赆 "
+"赆翎綮摅妁"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tuvalu"
-msgstr "燥踱犭稞"
+msgid "Do not include the browser cache"
+msgstr "座襁 翮 cache 麸 疱耖玢玺"
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "择轫轫糗眙 赆 燥祓茔觑"
+msgid "Please, choose your keyboard layout."
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 溟荇犷 麸 痣珀赳镫镢唢."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Turkey"
-msgstr "燥躐赀"
+msgid "Standard"
+msgstr "怎痖挈"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Tonga"
-msgstr "渣汴"
+msgid "Please choose your mouse type."
+msgstr "嗅襻赆膻 屦殡蓊翦 酏痫 痫眙殛轱."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Tunisia"
-msgstr "怎礴筮"
+msgid "Connect..."
+msgstr "育礓弩..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "燥躐觎屙轶糗"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "琉蒴貅 颀桁轶 麸 尻趱瘗艮 \"%s\"!"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "另狒镫殛 蚤禳"
+msgid "not configured"
+msgstr "溴 聃桁唧翮赍"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "燥赍胲秕"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Tajikistan"
-msgstr "葬翩殛轶糗"
+msgid "About"
+msgstr "绣襁"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Thailand"
-msgstr "葬茼溏"
+msgid "Proxies configuration"
+msgstr "氧桁唧彘 proxies"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Togo"
-msgstr "渣汴"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "冕腚殛蒡 忘糸弪 绣耖秣蒡"
+msgid "Start: sector %s\n"
+msgstr "榴鬓: 麸燧狎 %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Chad"
-msgstr "泽犴"
+msgid "Network interface already configured"
+msgstr " 溟屦狯 拈牯 蓣彘 掬 聃桁轶翦"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "娃箫 燥牝 赆 梳狸矧"
+msgid "Couldn't access the floppy!"
+msgstr "腻 暹磲 漉磲艮 瘃忉箸 篝 溟箨蒴!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Swaziland"
-msgstr "语踽骈胲礓"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "簖礓弩 篝镯 镤玢 Bugzilla ..."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Syria"
-msgstr "吁襁"
+msgid "Mail Server"
+msgstr "蓬躔珩弭玺掾 葬黪漶镬暹秕"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "烹 俞脞徜"
+msgid "Please click on a partition"
+msgstr "嗅襻赆膻 贶眙 觌殛 箦 扉 赆糗綮珞"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "榆 渣戾 赆 旭唔趔轲"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Suriname"
-msgstr "语躐轫莒"
+msgid "Have a nice day!"
+msgstr "梳朕 筢 燧襻!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Somalia"
-msgstr "语灬脒"
+msgid "across Network"
+msgstr "篝 倪牯躏"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Senegal"
-msgstr "渝礤丬腌"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "San Marino"
-msgstr "躲轱 提襁盹"
+msgid "Upgrade %s"
+msgstr "另徕荑扉箸 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "娱蓠襻 隋"
+msgid "Select Printer Connection"
+msgstr "择矧 簖礓弩珧 尻趱瘗艮"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Slovakia"
-msgstr "与镡彡哚"
+msgid "Scanning for TV channels in progress ..."
+msgstr "眠礤翎 犴徭摁珞 篝徼忐 翮脲狍珧 ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "娃箫 逾茈祓狁眙 赆 瞄犴 誊汩屙"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"遇茈灬 赆糗 翮 狃矬麸朕 狁麇唢 燧簌 FTP.\n"
+"嗅襻赆膻 溟锺棹篝 翮 颀桁轶 麸 FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Slovenia"
-msgstr "与镡屙哚"
+msgid "IP Range Start:"
+msgstr "捡轱 抨赀礴箸 裳:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "娃箫 零哚 烹蓓珧"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+" 躔珩弩哚 躔羼孱躔珩弭玺 拈徜殛酏秕 (inetd) 铄觊碥彘 扉 痫殛殡哚\n"
+"茈膣 躔珩弩辋 溟徜殛酏秕 雉 黢彘苕镯翎. 胚磲 躔妪桴礴 汩 翮 \n"
+"尻赀礴箸 痫腚 躔珩弩辋,  telnet, ftp, rsh 赆 rlogin. "
+"狃屙羼泔痫哏箸\n"
+"狨艮 翮 躔珩弩哚 狃屙羼泔痫殓桢 屦唧珧 赆 糸 躔珩弩咤 汩 糸 镳镞弪\n"
+"暹磲 躔妪桴礴."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Singapore"
-msgstr "娱沣狃稞耒"
+msgid "the height of the progress bar"
+msgstr "麸 矧 翮 泷犰燹 瘃稂滹"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sudan"
-msgstr "语蹁茼"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+" 琉镨揸艴箸 燧簌 %s 篝镯 躔镫镢轶艮: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Seychelles"
-msgstr "渝蓦脲"
+msgid "Argentina"
+msgstr "榴沐眙轫"
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr "娃箫 语腼忐眙矧"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"\n"
+"\n"
+" 琉镤秣 恶礴箸."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "俞秕溟贽 榴徕哚"
+msgid "Domain Name Server"
+msgstr "蓬躔珩弭玺掾 柬镬 燥燧"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Rwanda"
-msgstr "扬踯眙"
+msgid "Security Level:"
+msgstr "硼唣邃 狍鲠脲哚:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Russia"
-msgstr "样筮"
+msgid "Mount points must begin with a leading /"
+msgstr "燥 箸戾唢 簖礓弩珧 瘃蒺彘 磲 铄觊碥彘 戾 /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Romania"
-msgstr "扬蹯犴哚"
+msgid "Postfix Mail Server"
+msgstr "蓬躔珩弭玺掾 葬黪漶镬暹秕 Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reunion"
-msgstr "彦秕黹"
+msgid "Quit without saving"
+msgstr "割镤矧 鼯襁 狃镨揸艴箸"
#: ../../lang.pm:1
#, c-format
-msgid "Qatar"
-msgstr "梳糗"
+msgid "Yemen"
+msgstr "斟燧礴"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Palau"
-msgstr "嗅胲秕"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "刘酎 麸 瘃嵇 暹磲 溟徼蒹殪 篝珥 轶麸箦脒溽 麸 MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Paraguay"
-msgstr "嗅襻泔踯"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 麸 燧汩篝 燧沐栾騖n"
+"痫 屦轸褫疱翎 篝 Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Portugal"
-msgstr "酗耵镢犭哚"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "造揿 Splash"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> 震荞黠蹴 痫腚 瘃茔灬翎 狃 翎 镳镞 祓锺暹翦 磲 屦殡蓊弭 (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "酗踺耵 堰觑"
+msgid "Hard drive detection"
+msgstr "彭麸痖箪 溥箨秕"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "娃箫 羞絷衢耥"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"腻 蓣弭 屦殡蓊彘 镬茕 疳贻豉.\n"
+"嗅襻赆膻 屦殡蓊翦 翮 咫荀轶翮 邈赆糗篝狍 痫 栎脲翦:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "俞轫 虚羼 赆 涕赍朦"
+msgid "Please enter the WebDAV server URL"
+msgstr "嗅襻赆膻 彘筌沐翦 翮 溟妪桴眢 麸 孱躔珩弭玺 WebDAV"
#: ../../lang.pm:1
#, c-format
-msgid "Poland"
-msgstr "酗膣磉"
+msgid "Tajikistan"
+msgstr "葬翩殛轶糗"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Pakistan"
-msgstr "嗅觊篝茼"
+msgid "Accept"
+msgstr "琉镤秣"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Philippines"
-msgstr "珠腴痧唔弪"
+msgid "Description"
+msgstr "绣耖泷狯"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "嗅痫-洼 蔑斛磔"
+msgid "Error opening %s for writing: %s"
+msgstr "遇茈灬 赆糗 麸 茼镩沆 麸 %s 汩 邈泷狯: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "French Polynesia"
-msgstr "冕腚殛 酗膈礴筮"
+msgid "Mouse type: %s\n"
+msgstr "札痫 痫眙殛轱: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Peru"
-msgstr "绣耧"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 篝 XFree "
+"%s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "嗅磲燔"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "嗅襻赆膻 锺唧翦 麸 齄耧 麸 CD/DVD "
-#: ../../lang.pm:1
-#, c-format
-msgid "Oman"
-msgstr "响茼"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"\n"
+"\n"
+" 响茕 羼汜筮狎: 黢摅翮."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "New Zealand"
-msgstr "洼 歧脶礓哚"
+msgid "Expert Area"
+msgstr "绣耖秣 旭秣珈蓓"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Niue"
-msgstr "瓦秕"
+msgid "Choose a monitor"
+msgstr "硼殡蓊翦 镨"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Nauru"
-msgstr "歪稞耧"
+msgid "Empty label not allowed"
+msgstr "腻 屦轸褫疱翎 茕彘 弭殛蒴"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Nepal"
-msgstr "湾疖"
+msgid "Maltese (UK)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "烷赆褴泔踽"
+msgid "I can't add any more partition"
+msgstr "腻 祓锺 磲 瘃矬栎簌 赆翎綮摅彘"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "烷沌襁"
+msgid "Size in MB: "
+msgstr "梯沐栾 箦 MB"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "娃箫 忘聆镫"
+msgid "Remote printer"
+msgstr "琉镬彡聃箪蓓矧 尻趱瘗艮"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Niger"
-msgstr "瓦沌襻"
+msgid "Please choose a language to use."
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 汶筢."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "洼 梳腌滹磉"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"醒嫌献: 刘艮 篚箨艴 暹磲 掬 聃桁轶燧礴 汩 磲 篚礓蒎翎 戾 麸 "
+"拈徜哧趱.\n"
+"琉胲 疳艮篝 OK 汩 磲 犟狒摅弭 糸 躔荞黠躞弪 聃桁唧彘.\n"
+"岭胲骘眙狎 翎 疳襻贶豉 疱溥 栳 犭胲铄翦 翮 躔荞黠躞 颀桁轶."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Namibia"
-msgstr "歪爝祓獒"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"甜锺 磲 聃桁唧 麸 簖篝珈 筢 蒴箝 翦 磲 篚礓蒎 狨酎灬翎 蓓犴 黢摅翮."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mozambique"
-msgstr "田驷焘哧"
+msgid "Floppy format"
+msgstr "诛耢 拈箨蒴狎"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "提脶轶哚"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Mexico"
-msgstr "体铋挈"
+msgid "Generic Printers"
+msgstr "缅黹觑 抨趱瘗糨"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malawi"
-msgstr "提胲秕"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 麸 尻趱瘗艮 篝镯 镳镞 栳 狃矬糨腚镯翎 镩 羼汜筮弪 "
+"尻酏瘗箸 濑篝 麸 镬 篚箨艴掾/狁麇唢 篝 泷犰燹 彘筢泫戕"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Maldives"
-msgstr "提脘哜弪"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
+"祥 筢聩糨 狨麸 麸 扃麽磙灬麸 暹磲 溟徼蒹殪镩 箦 茈腼躜 躔镫镢轶糨"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "提躐哧轱"
+msgid "First sector of the root partition"
+msgstr "旭矧 麸燧狎 翮 赆糗綮珞珧 尻赀礴箸"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malta"
-msgstr "誊媵"
+msgid "Alternative drivers"
+msgstr "彭犭脶牯殛镞 镤玢镞"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Montserrat"
-msgstr "田眢羼荇"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"嗅襻赆膻 屦殡蓊翦 弪 糸 屦殡镢蒡 痫 黢彘苕弩翦.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "提躐轸犴哚"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Martinique"
-msgstr "提耵轫哧"
+msgid "Cape Verde"
+msgstr "旭荏轫 陵聩艮耖"
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "娃箫 嘛皴啭 提耖茼睐"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "另 狨艮 篚箨艴 蓣彘 麸 篥茈灬 Cyrix 6x86 Coma"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mongolia"
-msgstr "田沣镫哚"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "涕犴燔"
+msgid "Guam"
+msgstr "藐秕莒"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mali"
-msgstr "誊腴"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 翮 椠襻 秕 暹磲 篚礓邃屐蓓矧 尻趱瘗艮 筢 彘筌沐翦 "
+"蓓 镬 篚箨艴掾/狁麇唢 篝 泷犰燹 彘筢泫戕"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Macedonia"
-msgstr "旭 瞄秕汴矬脶忾贽 溺祜犟狒哚 翮 提赍滹磉狎"
+msgid "/Options/Test"
+msgstr "/硼殡镢蒡/藻篝"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "娃箫 誊耋犭"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"刘酎 麸 屦唣邃 瘃蒺彘 磲 黢珞殪镳镩玷暹 戾 瘃矬秣. 受礤 麸 簖篝珈 筢騖n"
+"痖 妪黢珞麸, 犭胲 痫臊 艴徇箬玺. 腻 瘃蒺彘 磲 黢珞殪镳镩玷暹 箦 簖篝珈醆n"
+"篚礓邃屐蓓 篝 拈徜哧趱 LAN. 腻 躔荞黠蹴 犍溟觑 瘃忉箸."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "提溽汜箨荞"
+msgid "Mounting partition %s"
+msgstr "旭矬荞翮箸 赆糗綮珞珧 %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moldova"
-msgstr "田脘徕哚"
+msgid "User name"
+msgstr "柬镬 黢摅翮"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Monaco"
-msgstr "田磲挈"
+msgid "New configuration (isdn-light)"
+msgstr "洼 颀桁轶 (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Morocco"
-msgstr "提顸觑"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Libya"
-msgstr "碎恺"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "酗獒 赆糗綮珞 栎脲翦 磲 黢珞殪镳镩摅弭 汩 麸 Linux4Win;"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Latvia"
-msgstr "隋趑镯哚"
+msgid "Backup system"
+msgstr "另暨泷狯 馏鲠脲哚 吁篝揿狒矧"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "孙躅屐怙泔"
+msgid "Test pages"
+msgstr "娘觊灬篝殛蒡 箦脒溴"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "碎栾踽磉"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"诉篝 豉 溴滹燧睐 瘃矧 屦犴狯锺:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "隋簏麸"
+msgid "Checking %s"
+msgstr "鸽邈黠 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liberia"
-msgstr "碎忮襁"
+msgid "TCP/Socket Printer Options"
+msgstr "硼殡镢蒡 尻趱瘗艮 TCP/Socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Sri Lanka"
-msgstr "玉 塑黻"
+msgid "Card mem (DMA)"
+msgstr "DMA 贶耵狎"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "碎黥屙篝荛"
+msgid "France"
+msgstr "冕腚哚"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "躲轱 孙蹶茯"
+msgid "browse"
+msgstr "犴徭摁珞"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "诉忉盹"
+msgid "Checking installed software..."
+msgstr "'鸽邈黠 邈赆翦篝珈蓓 瘃镢襻祆荇..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laos"
-msgstr "塑矧"
+msgid "Remote printer name missing!"
+msgstr "燥 狃镬彡聃箪蓓 镬 尻趱瘗艮 脲唣彘!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "梳驷牦糗"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"容脲翦 磲 屙羼泔痫檗箦翦 翮 尻酏瘗箸 箦 尻趱瘗糨 篝 麸痖挈 筢 溥牯躏;\n"
#: ../../lang.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "娃箫 瘦蹯犴"
+msgid "Turkey"
+msgstr "燥躐赀"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "曙踱蓍"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Korea"
-msgstr "曙褫"
+msgid "Number of buttons"
+msgstr "榴殍禳 痣揸赳"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "曙褫 (曼皴獒)"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "麻弭碥 \"numeric row\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "俞轫 书趄 赆 洼忾"
+msgid "Module"
+msgstr "恶桉"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Comoros"
-msgstr "曙禳皴"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"硼唧珧 羼汜筮弪 痫 溴 溏扉秕胥掼珀犴 戾 狨酎 麸 瘃襻祆 麸 \"foomatic-"
+"configure\" 溴 祓锺稞 磲 戾翎鲥耔稞."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "书耖祓荇"
+msgid "Hardware"
+msgstr "针殛"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "梳祓骁"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "葬豸耧磲 翎 痣揸赳 Ctrl 赆 Alt"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "书胥轶糗"
+msgid "United States"
+msgstr "..."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Kenya"
-msgstr "瘦眭"
+msgid "Default OS?"
+msgstr "蓬 锺轶祜 脲轸秕胥殛;"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Japan"
-msgstr "舍瘗磉"
+msgid "Swiss (German layout)"
+msgstr "烹忮糸挈 (缅耢犴殛 溟荇犷)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Jordan"
-msgstr "娠皲犴哚"
+msgid "Configure all heads independently"
+msgstr "妖桁轶  豉 赍鲠膻 犴孱荞翮翎"
-#: ../../lang.pm:1
-#, c-format
-msgid "Jamaica"
-msgstr "枣犰荛赆"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr "犴轺礤珀."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Iceland"
-msgstr "审脶礓哚"
+msgid "NTP Server"
+msgstr "蓬躔珩弭玺掾 NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Iran"
-msgstr "神茼"
+msgid "Load/Save on floppy"
+msgstr "贮耵/琉镨揸艴箸 箦 溟箨蒴"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Iraq"
-msgstr "神荜"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "刘酎 麸 栎灬 溴 蓣彘 彡 贶痫轱 bootsplash 篝 %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "埋弭犴殛 配荟 身溟觑 訇遽盹"
+msgid "nice"
+msgstr "赆朦"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "India"
-msgstr "身溥"
+msgid "Leaving in %d seconds"
+msgstr "割镤矧 箦 %d 溴豸羼屦翎"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Israel"
-msgstr "审襻揠"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "渝 痫獒 箦轳獒贽 瘘耵 暹磲 篚礓邃屐蓓 麸 禳眙屐 筢;"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ireland"
-msgstr "神脶礓哚"
+msgid "Country"
+msgstr "襻"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Indonesia"
-msgstr "身滹礴筮"
+msgid "Property"
+msgstr "射辄翮翎"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Hungary"
-msgstr "硝沣狁哚"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Haiti"
-msgstr "龙艮"
+msgid "LAN Configuration"
+msgstr "妖桁轶 L镣"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "蜀镝暨"
+msgid "Ghana"
+msgstr "藐茼"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Honduras"
-msgstr "享滹"
+msgid "Path or Module required"
+msgstr " 容箸 麸 恶桉 狃衢翦唪衢"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "顽筮 族耥 赆 娃箫 提晖酎磲腠"
+msgid "Advanced Options"
+msgstr "旭秣珈蓓弪 硼殡镢蒡"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hong Kong"
-msgstr "罪磴 曙磴"
+msgid "Coma bug"
+msgstr "遇茈灬 Coma"
-#: ../../lang.pm:1
-#, c-format
-msgid "China"
-msgstr "蔬磲"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"\n"
+" Linux\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" IDE\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 峨脶\n"
+"\n"
+" 琉镨揸艴箸\n"
+"\n"
+"\n"
+"\n"
+" 硼犴狯锺躙n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 戾糗 膺狎\n"
+"\n"
+"\n"
+"\n"
+" 箱玢\n"
+"\n"
+"\n"
+"\n"
+" 另徇皴箸\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 想镪腌颃桤赍\n"
+"\n"
+"\n"
+" 悬翦\n"
+"\n"
+"\n"
+"\n"
+" 想镪腌颃桤赍\n"
+"\n"
+" 悬翦\n"
+"\n"
+" 磔颸n"
+"\n"
+" 拈徙襻鲛\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" HFS\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../lang.pm:1
-#, c-format
-msgid "Guyana"
-msgstr "蔑蹰茼"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+"."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "蔑斛磔-甜轶茱"
+msgid "There was an error installing packages:"
+msgstr "旭镪朕桤赍 篥茈灬 赆糗 翮 邈赆糗篝狍 豉 疳贻豉:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guam"
-msgstr "藐秕莒"
+msgid "Lexmark inkjet configuration"
+msgstr "氧桁唧彘 尻趱瘗艮 戾胲礴 Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "蔑踽翦燔脶"
+msgid "Undo"
+msgstr "另徇皴箸"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "忘糸 缅氵 赆 忘糸 顽箝 榆眙秕轸"
+msgid "Save partition table"
+msgstr "琉镨揸艴箸 疬磲赆 赆翎綮摅妁"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "审珈羼轫 蔑斛磔"
+msgid "Finnish"
+msgstr "珠黼犴溟挈"
#: ../../lang.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "蔑踽溴腼"
+msgid "Macedonia"
+msgstr "旭 瞄秕汴矬脶忾贽 溺祜犟狒哚 翮 提赍滹磉狎"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guinea"
-msgstr "蔑蹰磔"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"燥 觑轫耒篝 犴 黢摅翮 贶礤 黢摅 翮 镬茕狎 \"fileshare\". \n"
+"甜锺暹翦 磲 翮 瘃矬栎箦翦 篝镯 贶桢 黢摅翮 箦 狨艮 翮 镬茕 戾 麸 "
+"userdrake."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Gambia"
-msgstr "藐莒痖"
+msgid "Slovenian"
+msgstr "与镡屙哚"
#: ../../lang.pm:1
#, c-format
-msgid "Greenland"
-msgstr "民镩脶礓哚"
+msgid "Libya"
+msgstr "碎恺"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Gibraltar"
-msgstr "瞄怦犭糗"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "妖桁轶, 邈赆糗篝狍 腼汩箪殛稞, 尻赀礴箸 孱躔珩弭玺..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghana"
-msgstr "藐茼"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- 陪泷狯 箦 CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "冕腚殛 蔑蹰茼"
+msgid "Table"
+msgstr "羞磲赆"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Georgia"
-msgstr "缅氵"
+msgid "I don't know how to format %s in type %s"
+msgstr "溴 钶聩 瘙 磲 祜聆镳镩摅 麸 %s 箦 酏痫 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Grenada"
-msgstr "民屙茕"
+msgid "Model"
+msgstr "田眙蓦"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "琼蓓 箩筮脲轱"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Gabon"
-msgstr "藐犰瘘"
+msgid "Stop Server"
+msgstr "藻耢狒轶禳 蓬躔珩弭玺"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Faroe Islands"
-msgstr "娃箫 皱顸弪"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"硼殡蓊翦 麸 栎灬 \n"
+"汩 麸 lilo 赆 麸\n"
+"bootsplash, 祓锺暹翦\n"
+"磲 翎 屦殡蓊弭 赆閈n"
+"铄鼯耖篝"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "涕犟镯珞哚"
+msgid "Modem"
+msgstr "厅眙屐"
-#: ../../lang.pm:1
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "娃箫 筑觌犴 (提脞唔弪)"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"\n"
+"\n"
+" 想镪腌颃桤赍\n"
+"\n"
+"."
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "诌翩"
+msgid "Tuvalu"
+msgstr "燥踱犭稞"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Finland"
-msgstr "珠黼犴溥"
+msgid "Use auto detection"
+msgstr "遵摅 狨酎灬翮 犴喵礤躞珧"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "灵栝镳哚"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"燥 GPM 瘃矬栎翦 躔矬艮耖铉 痫眙殛轱 箦 弼狁祜爿 忉箝箪蓓弪 箦 觑眢醆n"
+"赍殪蓓秕 赆 屦轸褫疱 脲轸秕胥咤 狃镪镳掾 赆 屦殛腌箸 戾 黢摅 \n"
+"痫眙殛轱 篝珥 觑眢, 赆棹 赆 躔矬艮耖铉 犴徜躏燧睐 戾盹."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Spain"
-msgstr "审疳磉"
+msgid "Started on boot"
+msgstr "五赀礴筢 篝珥 尻赀礴箸"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr "Linux:"
+
+#: ../../standalone/draksec:1
#, c-format
-msgid "Eritrea"
-msgstr "篷蹊襻哚"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"祥 疳襻贶豉 屦殡镢蒡 狍鲠脲哚 祓锺稞 磲 屦殡邈稞韁n"
+"汩 翮 瘃矬狁祜戕 翮 狍鲕脲獒. 瞄 屦孱玢摅彘 溴唪 翮 怙掼彘.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "孽糸贽 俞鬈襻"
+msgid "Automatically find available printers on remote machines"
+msgstr "埋暹翦 狨酎灬翎 溟徼蒹殪秕 尻趱瘗糨 箦 狃镬彡聃箪蓓 扃麽磙灬翎"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Egypt"
-msgstr "吝沲痿矧"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+" 琉镨揸艴箸 箦 葬轫哚 篝 篚箨艴: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Estonia"
-msgstr "朋栾磉"
+msgid "East Timor"
+msgstr "另狒镫殛 蚤禳"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Ecuador"
-msgstr "审珈羼轫"
+msgid "Del profile..."
+msgstr "拈徙襻鲛 瘃秭唠..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Algeria"
-msgstr "岭沐襁"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "娘扉黹赆磙 溺祜犟狒哚"
+msgid "Installing Foomatic..."
+msgstr "陪赆糗篝狍 Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Dominica"
-msgstr "汪镬唔殛"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "嗅襻赆膻 狃矬蹴溴桢唪 赆 戾糗 疳艮篝 Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Denmark"
-msgstr "尼磉"
+msgid "detected"
+msgstr "犴轺礤珀"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "枣殪痫豸"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "燥 溥牯躏 瘃蒺彘 磲 屦犴尻觊礴桢, 容脲翦 磲 麸 屦犴尻觊磙箦翦 ;"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Cyprus"
-msgstr "数瘃矧"
+msgid "Package: "
+msgstr "嗅贻麸:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Christmas Island"
-msgstr "娃箫 遵轶麸蹉蓓睐"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "龄蹴犰哚 邈泷狯掾 麸 /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "旭荏轫 陵聩艮耖"
+msgid "SECURITY WARNING!"
+msgstr "醒吓赡闲仙怯 劣至伺闪!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cuba"
-msgstr "曙"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Colombia"
-msgstr "曙腼焘哚"
+msgid "No, I don't want autologin"
+msgstr "槛, 溴 屦殍蹯 狨酎灬翮 瘃矬疠脶箸"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Cameroon"
-msgstr "梳戾耧"
+msgid "Windows Migration tool"
+msgstr "篷汜脲唢 体糗忉箸 Windows "
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Chile"
-msgstr "组朕"
+msgid "All languages"
+msgstr "茧弪 镩 汶箦"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "娃箫 曙蹶"
+msgid "Removing %s"
+msgstr "瘤徇皴箸 %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "陵艮 烹弼犴麸篝稞"
+msgid "Testing your connection..."
+msgstr "娘觊燹 簖礓弩珧... "
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Switzerland"
-msgstr "烹忮暨"
+msgid "Cache size"
+msgstr "燧沐栾 Cache"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"轧襻 躔荞黠蹴 犍溟觑 瘃忉箸, 犭胲 黢摅 麸 篚篝揿狒矧 箦 溥牯躏 彡 "
+"溴 篚磉篝狒衢."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "溺祜犟狒哚 叔眙耖贽 瘤耖贽"
+msgid "Start sector: "
+msgstr "榴鏖挈 麸燧狎: "
#: ../../lang.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "娃箫 庶觑 (兽腴磴)"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "燥 疳贻麸 %s 瘃蒺彘 磲 犴徕徼扉篝暹. 容脲翦 磲 麸 邈赆翎篝摅弭;"
#: ../../lang.pm:1
#, c-format
-msgid "Canada"
-msgstr "梳磲滠"
+msgid "Seychelles"
+msgstr "渝蓦脲"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belize"
-msgstr "甜咫哝"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"燥 Printerdrake 篚磔犟轫 麸 镬 麸 祜眙蓦秕 狃 麸 狨酎灬麸 屙麸痖箪 "
+"戾 翮 脒篝 豉 祜眙蓦 狃 翮 廛箸 溴滹燧睐 尻趱瘗酤 汩 磲 翮 "
+"赆臊翦耒 屦殡镢. 刘艮 屦殡镢 祓锺暹 磲 暹磲 胲栾, 彘溟贶 遘 "
+"尻趱瘗艮 筢 溴 暹磲 赆翎鼯耒燧盹 篝珥 廛箸 溴滹燧睐. 腻唪 腼轲 犴 "
+"屦殡镢 麸 尻趱瘗艮 暹磲 簌篝 赆 贶眙 觌殛 篝 \"燥 祜眙蓦 暹磲 簌篝"
+"\" 遘  贶眙 觌殛 篝 \"硼殡蓊翦 麸 祜眙蓦 麇轳镪唔玺醆" 汩 磲 "
+"屦殡蓊弭 麇轳镪唔玺 麸 祜眙蓦 狃 翮 屦屙 镨鏫n"
+"瞄 麸 尻趱瘗艮 筢 麸 Printerdrake 怦揸:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarus"
-msgstr "隋蹶锺哚"
+msgid "Bad password on %s"
+msgstr "朋鲠腱蓓矧 犍溟挈 篝 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "甜雉箫踯磲"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"疙狎 茔睐篝矧 尻趱瘗艮 暹磲 篚礓屐蓓矧 狃艴桢哚 篝 簖篝珈 筢"
#: ../../lang.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "娃箫 甜秕廨"
+msgid "Zambia"
+msgstr "栖祓獒"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "甜秕糗"
+msgid "Security Administrator (login or email)"
+msgstr "拈狩彘耖篝掾 馏鲠脲哚 (瘃矬疠脶箸 翎黪漶镬暹)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bahamas"
-msgstr "甜狩莒弪"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "缩疖灬, 躔矬翮襁骘眙衢 禳盹 镩 瘐褶礤 2.4"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Brazil"
-msgstr "埋徭殡哚"
+msgid "Romanian (qwerty)"
+msgstr "扬蹯犴殛 (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bolivia"
-msgstr "嘛腴膺"
+msgid "Under Devel ... please wait."
+msgstr "震 另莛趱铉 ... 疳襻赆膻 疱耖燧礤翦."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "甜耧蹴蓍 汪狁秕筢胲"
+msgid "Czech Republic"
+msgstr "泽蓣殛 溺祜犟狒哚"
#: ../../lang.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "洛耢稞溴"
+msgid "Egypt"
+msgstr "吝沲痿矧"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Benin"
-msgstr "甜屙唔"
+msgid "Old configuration (isdn4net)"
+msgstr "嗅腴 颀桁轶 (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "甜秕耧糸"
+msgid "Sound card"
+msgstr "受耵 搠秕"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Bahrain"
-msgstr "甜狩褫轫"
+msgid "Import Fonts"
+msgstr "砰筢泫戕 民犰灬麸箦轳"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "嘛蹼汜襁"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"各弭 扉 戾丬腌 赆糗綮珞 豉 MicroSoft Windows \n"
+"旭雉暹睐 瘃 磲 犭胲铄翦 麸 燧沐椟 翮騖n"
+"(受眙 觌殛 屦茼 翮 赆 屦殡蓊翦 \"岭脶戕 体爿栾躜\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Burkina Faso"
-msgstr "甜秕耜唔 周箫"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "甜犴汴脶眙蒡"
+msgid "Change partition type"
+msgstr "岭脶戕 酏痫 赆糗綮珞珧"
-#: ../../lang.pm:1
-#, c-format
-msgid "Barbados"
-msgstr "甜狁祓茼麸"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"另茈躞鏫n"
+"\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "嘛箜哚-篷驽泔膺礴"
+msgid "Network Options"
+msgstr "硼殡镢蒡 拈牯"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Azerbaijan"
-msgstr "伶羼祓狷翩茼"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"澎鲕黹箸 栎灬麸騖n"
+"篝珥 觑眢"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Aruba"
-msgstr "榴稞祓"
+msgid "Statistics"
+msgstr "郁狒轶糸贶"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Australia"
-msgstr "刘篝襻脒"
+msgid "(on %s)"
+msgstr "(篝镯 %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "领羼殛犴殛 俞禳"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Argentina"
-msgstr "榴沐眙轫"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Antarctica"
-msgstr "另翎耜糸贽"
+msgid "average"
+msgstr "燧箫 矧"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "零挈脶"
+msgid "New printer name"
+msgstr "梳磔磲 镬 尻趱瘗艮"
#: ../../lang.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "想脶礓殛蒡 另暨腚弪"
+msgid "Equatorial Guinea"
+msgstr "审珈羼轫 蔑斛磔"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Armenia"
-msgstr "榴戾磉"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Albania"
-msgstr "岭忉磉"
+msgid "Build Backup"
+msgstr "溺扉秕胥哚 犴糸泷荟 狍鲠脲哚"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "零赀脶"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"瞄 磲 尻趱瘙箦翦 狃 翮 泷犰燹 屙麸膻 (疳褴桴耧 翦耢狒殛稞) 贶眙 黢摅 "
+"翮 屙麸朕 \"%s <狁麇唢>\" \"%s<狁麇唢>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "另暨汴秕 赆 甜狁祓稞眙"
+msgid "Currently, no alternative possibility is available"
+msgstr "旭矧 麸 疳顸 溴 躔荞麇 茈腌 屙犭脶牯殛"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "琼蓓 榴徕殛 澎轳荇"
+msgid "Romanian (qwertz)"
+msgstr "扬蹯犴殛 (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Andorra"
-msgstr "另潼襻"
+msgid "Write Config"
+msgstr "陪泷狯 妖桁轶珧"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "瘤汜黹篝茼"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+" 躔珩弩哚 routed 屦轸褫疱 翮 狨酎灬翮 屙珈蓠 麸 疬磲赆 漶镬镫珞珧 \n"
+"IP 燧簌 麸 瘃镪腼 RIP. 嗅'  痫 麸 RIP 暹磲 艴褫 溟徜邃镬蓓 "
+"箦 \n"
+"扉犟 溥牯踽, 戾汜臊翦襻 溥牯踽 狃衢麸 疱耖痣镪羼 瘃镫脶."
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "术觌殛蒡 篚礓蒹彘 %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "瘤衢褫篝 瘃 糸 腼汩贻 祜碥溴騖n"
+msgid "Kiribati"
+msgstr "书耖祓荇"
-#: ../../modules.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
msgstr ""
-"腻 躔荞麇 痣蒿 躔矬艮耖铉 PCMCIA 汩 麸躜 瘐褶礤 2.2. 受眙 黢摅 麸 "
-"瘐褶磲 2.4."
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "噬颓釉 韵 严牧噬!"
+msgid "Browse"
+msgstr "另徭摁珞"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "瞄 屙羼泔痫哏箸 痫眙殛轱"
+msgid "CDROM"
+msgstr "CDROM"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "嗅襻赆膻 滹觊燔篝 麸 痫眙哧"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "容脲翦 磲 滹觊燔箦翦 磲 篚礓彖暹翦 篝 拈徜哧趱 酤襻;"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No mouse"
-msgstr "座襁 痫眙哧"
+msgid "Belgian"
+msgstr "洛脬殛"
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "none"
-msgstr "赆磔磲"
+msgid "Do you have an ISA sound card?"
+msgstr "各弭 贶耵 搠秕 ISA;"
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "择辋 痣揸赳"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"腻 怦蓁珀 瘃矬狁祜爿狎 溟牯 Ethernet 篝 簖篝珈 筢.\n"
+"腻 祓锺 磲 聃桁唧 狨麸 麸 酏痫 翮 簖礓弩."
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "凝 痣揸赳"
+msgid "Windows"
+msgstr "Windows "
-#: ../../mouse.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 痣揸赳秕"
+msgid "Can't make screenshots before partitioning"
+msgstr "龄狒 朕 篝殂扉雉 瘃轫 狃 翮 溏扉秕胥哚 赆翎綮摅妁"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Host Name"
+msgstr "柬镬 吁篝揿狒矧"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "/File/Save _As"
+msgstr "/榴麇唢/琉镨揸艴箸 _衮"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (箦轳獒挈, 疳腴 C7 酏痫)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr "CUPS CUPS 茧 Printerdrake CUPS 孱躔珩弭玺掾 孱躔珩弭玺掾."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"麸 %s 溴 暹磲 篝 廛箸 溴滹燧睐 豉 筢聩酤, 磲 聃桁轶翦 麇轳镪唔玺;"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Delay before booting default image"
+msgstr "梳桴篝蓠珞 瘃轫 翮 尻赀礴箸"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Restrict command line options"
+msgstr "琉徙艴箸 屦殡镢 泷犰燹 屙麸朕"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "East Europe"
+msgstr "另狒镫殛 捧颃痃"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Use free space"
+msgstr "遵摅 咫妪桢耧 齄耧"
-#: ../../mouse.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "use dhcp"
+msgstr "黢摅 dhcp"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Mail alert"
+msgstr "砰滹痫哏箸 葬黪漶镬暹秕"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "缅黹觑 酏痫 戾 3 痣揸赳"
+msgid "Internet configuration"
+msgstr "氧桁唧彘 拈徜殛酏秕"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "缅黹觑 酏痫 戾 2 痣揸赳"
+msgid "Uzbekistan"
+msgstr "硝骒疱觊篝茼"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "serial"
-msgstr "箦轳獒挈"
+msgid "Detected %s"
+msgstr "埋蓁珀 %s"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "/Autodetect _printers"
+msgstr "/彭麸痖箪 _尻趱瘗酤"
-#: ../../mouse.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Wheel"
-msgstr "体 耧滠觊"
+msgid "Finish"
+msgstr "暂腼"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Generic"
-msgstr "缅黹贽"
+msgid "Show automatically selected packages"
+msgstr "刘酎灬翮 瘃镡镫 屦殡邈燧睐 疳贻豉"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Togo"
+msgstr "渣汴"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "缅黹觑 酏痫 痫眙哧 PS2 戾 耧滠觊"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "受糸 溴 疝沐 赆胲! 胚磲 麸 mkisofs 邈赆翦篝珈蓓;"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Standard"
-msgstr "怎痖挈"
+msgid "Please try again"
+msgstr "嗅襻赆膻 瘃矬疳柁篝 钺碥"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
+msgid "The model is correct"
+msgstr "燥 祜眙蓦 暹磲 簌篝"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "彭犭脶戕 戾翎铨 屦唣邃珧 赆 镬徜殛掾 翎铋睃扃箸"
+msgid "FAT resizing failed: %s"
+msgstr "岭脶戕 戾爿栾躜 FAT 狃蒴貅: %s"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "育祓趱铉 漭眙耧"
+msgid "Individual package selection"
+msgstr "硼殡镢 铄鼯耖篝 疳贻豉"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "另莛趱铉 漭眙耧"
+msgid "This partition is not resizeable"
+msgstr "刘艮 赆糗綮珞 溴 祓锺暹 ' 犭胲铄 燧沐栾."
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "须珩秭锺咤"
+msgid "Location"
+msgstr "燥痫桢筮"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Is this correct?"
-msgstr "御篝;"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../my_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Journalised FS"
+msgstr "Journalised FS"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "遇茈灬 邈泷狯掾 篝 狁麇唢 %s"
+msgid "Guatemala"
+msgstr "蔑踽翦燔脶"
-#: ../../partition_table.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Bad backup file"
-msgstr "梳翦篝襻祆蓓 弼邃耖挈 狁麇唢"
+msgid "This machine"
+msgstr "刘酎 麸 扃鬈礴灬"
-#: ../../partition_table.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr " 屦犴狯锺 狃 麸 狁麇唢 %s 狃蒴貅: %s"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "虚栳睃 DOS 泷莒灬 溥箨秕: %s \n"
-#: ../../partition_table.pm:1
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
-"震荞麇 蓓 赍睃 篝镯 疬磲赆 赆翎綮摅妁 灬 溴 祓锺 磲 麸 黢珞殪镳镩摅.\n"
-" 祜磲溟贽 臊箸 暹磲 磲 戾翎觊磙箦翦 糸 瘃妪秕箦 赆翎綮摅彘 筢 蒴箝 "
-"翦 麸 赍睃 磲 怦彖暹 溥痣 篝珥 尻翦翎燧礴 赆糗綮珞"
+"嗅襻赆膻 屦殡蓊翦 翎 狁麇哚 麸躜 赆翎朦泔躜 赆 贶眙 觌殛 篝 '瘃矬柁赙'"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr " 尻翦翎燧礴 赆糗綮珞 溴 躔矬翮襁驽翎 箦 狨酎 麸 酏痫 篚篝揿狒矧"
+msgid "Bahrain"
+msgstr "甜狩褫轫"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "mount failed: "
-msgstr "簖礓弩 狃蒴貅: "
+msgid "omit scsi modules"
+msgstr "疳褴脲轼 豉 狁桉荇 scsi"
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "唧"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "祥觑爿礤獒 麸 屦孱羼汜篝 (.. 6 汩 觌荏 i686)"
-#: ../../pkgs.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "nice"
-msgstr "赆朦"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"硼彘滢 贶礤翦 扉 溟牯踽贽 邈赆糗篝狍, 麸 溥牯躏 暹磲 掬 聃桁轶燧盹.\n"
+"受眙 觌殛 篝 彭糗铄 汩 磲 溟狒珩摅弭 糸 聃桁唧彘 筢, 荜躐 汩 磲 "
+"钺磲聃桁唧弭 翮 簖礓弩 篝 拈徜哧趱.\n"
-#: ../../pkgs.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "very nice"
-msgstr "痫臊 赆朦"
+msgid "Keyboard layout: %s\n"
+msgstr "拈荇犷 痣珀赳镫镢唢: %s\n"
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "important"
-msgstr "箸灬眙殛"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"配 祓锺暹翦 磲 屦殡蓊弭 犴 镩 篚礓屐蓓镩 尻趱瘗糨 狨麸 麸 扃麽磙灬麸 栳 "
+"暹磲 瘃矬廛箝祜 狃 狃镬彡聃箪蓓 扃麽磙灬翎 赆 狃 痫獒."
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "must have"
-msgstr "瘃蒺彘 磲 躔荞麇"
+msgid "Maltese (US)"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "腻 躔荞黠蹴 狁赍糨 赆翎綮摅彘 汩 RAID 屦轲蒌秕 %d\n"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"吁礓蒎 赆 狃矬蹴漭彘  翎 溟牯踽贶 篚篝揿狒 狁麇啭 (NFS), SMB (Lan\n"
+"Manager/Windows), 赆 NCP (NetWare) "
-#: ../../raid.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "狃雉貅哚 mkraid"
+msgid "Tvcard"
+msgstr "受耵 TV"
-#: ../../raid.pm:1
-#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "狃雉貅哚 mkraid (燹瘗 狃秕箝苕秕 翎 raidtools;)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "岭脶戕 箦 赆盹黹挈 赳 脲轸秕胥哚"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "腻 祓锺 磲 瘃矬栎簌 赆糗綮珞 篝 _祜聆镳镩珈蓓颻 RAID md%d"
+msgid "Size"
+msgstr "梯沐栾"
-#: ../../services.pm:1
-#, c-format
-msgid "Stop"
-msgstr "藻耢狒轶禳"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start"
-msgstr "抨赀礴箸"
+msgid "Greenland"
+msgstr "民镩脶礓哚"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On boot"
-msgstr "郁珥 尻赀礴箸"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""
-"座襁 屦轲胼镯 痣珩秭锺咤騖n"
-"汩 狨艮 翮 躔珩弩哚."
-#: ../../services.pm:1
-#, c-format
-msgid "Services and deamons"
-msgstr "震珩弩咤 赆 溽哽镯弪"
-
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "stopped"
-msgstr "溴 尻翦脲唪衢"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+" 颀桁轶 翮 觑轫掾 簖礓弩珧 麸 拈徜殛酏秕 蓣彘 掬 氵礤.\n"
+"刘艮 翮 篝殂燹 暹磲 屙羼戕.\n"
+"\n"
+"蚤 栎脲翦 磲 贶礤翦;"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "running"
-msgstr "尻翦脲唪衢"
+msgid "Delete All NBIs"
+msgstr "拈徙襻鲛 茧 豉 NBIs"
-#: ../../services.pm:1
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "硼殡蓊翦 糸 躔珩弩咤 痫 栳 铄觊盹 狨酎灬翎 赆糗 翮 尻赀礴箸"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"\n"
+"\n"
+" 遵摅 瘃镢褴祆狒矧 尻赀礴箸騖n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Root 篚箨艴 孱' 锺轶祜齖n"
+"\n"
+"\n"
+"\n"
+" 孱' 锺轶祜齖n"
+" 黢摅翮騖n"
+" 孱' 锺轶祜齖n"
+"\n"
+"\n"
+" 嗅褴脲轼 Linux\n"
+"\n"
+"\n"
+" 瞄 旭秣珈蓓秕騖n"
+" 黢摅翮."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Database Server"
-msgstr "蓬躔珩弭玺掾 萝箸 腻滹燧睐"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"犴 磲, 狃矬麸朕 翮 犴狯锺茯 翎黪漶镬暹秕 箦 狨艮 翮 溟妪桴眢 犭腴 "
+"篝镯 root."
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "琉镬彡聃箪蓓 溟狩暹耖箸"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "蚤 颀桁轶 XFree 栎脲翦 磲 蓣弭;"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "File sharing"
-msgstr "曙轫耒篝 狁麇哚"
+msgid "More"
+msgstr "峨脶"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Internet"
-msgstr "拈徜哧趱"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"体 狨酎 麸 屦唣邃 狍鲠脲哚 暹磲 漉磲艮 黢摅 麸 篚篝揿狒矧 篝  "
+"孱躔珩弭玺.\n"
+" 狍鲕脲獒 暹磲 狁赍糗 貘珉 翦 磲 漭麇翎 翎豸耧礤 篚礓蒹彘 狃 "
+"痫腚稞 疱胲翦.\n"
+"隅: 另 麸 扃鬈礴灬 暹磲 禳盹 汩 翮 黢摅  疱胲翮 篝 拈徜哧趱 酎翦 "
+"赆臊翦襻 磲 屦殡蓊弭 麽扃朦翦耧 屦唣邃 狍鲕脲獒"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing"
-msgstr "抨酏瘗箸"
+msgid "Account Password"
+msgstr "戍溟挈 旭忉箸"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-"五觊碥彘 翮 躔珩弩哚 孱躔珩弭玺 泷犰灬麸箦轳 X (狨酎 暹磲 狃狁徇翮麸 "
-"汩 磲 尻翦脲篝暹 麸 XFree)."
+"硼殡蓊狒 磲 邈赆翎篝摅弭 麸 瘃襻祆 尻赀礴箸 箦 扉 赆糗綮珞.\n"
+"彭盹暹翦  蓣弭 掬 邈赆糗篝狍 蓓 茈腼 瘃襻祆 尻赀礴箸 篝镯 箨腌顸 "
+"筢 溥箨 (.. System Commander).\n"
+"\n"
+"琉 痫辄 溥箨 铄觊碥翦;"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "贮耵 豉 镤玢 汩 糸 usb 篚箨艴蒡 筢."
+msgid "Tajik keyboard"
+msgstr ""
-#: ../../services.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"燥 Syslog 暹磲 躔珩弩哚 痫 黢珞殪镳镩稞 痫腚蒡 茈脲 躔珩弩咤 \n"
-"汩 磲 贶盹蹴 邈泷狯蒡 篝 狁麇哚 疳襻觑腼珞珧 篚篝揿狒矧 (log files)\n"
-"吁磉篝狒衢 篚礤鬓 脲轸秕胥哚 狨艮 翮 躔珩弩哚."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr "想镪腌颃桤赍 茧 孱' 锺轶祜齖n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "抨赀礴箸 麸 篚篝揿狒矧 搠秕 篝 扃鬈礴燔 筢"
+msgid "Font List"
+msgstr "诉篝 民犰灬麸箦轳"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-"燥 瘃镫腼 rwho 屦轸褫疱 箦 狃镬彡聃箪蓓秕 黢摅翦 磲 滹蹴 蓓犴 \n"
-"赆糗腼泔 豉 黢珞酤 麸 篚篝揿狒矧 (疳顸祜轱 戾 麸 finger)."
+"甜锺暹 磲 黢彘狍翦 磲 犭胲铄翦 翮 Open Firmware boot-篚箨艴 翦 磲\n"
+" 屙羼泔痫檗箦翦 麸 瘃襻祆 尻赀礴箸. 另 篝珥 屦犴尻赀礴箸 溴 溴唪 翮 "
+"瘃雉耧疝 麸 瘃襻祆 尻赀礴箸,\n"
+"疳艮篝 麸 Command-Option-O-F 赆糗 翮 屦犴尻赀礴箸 赆 彘筌沐翦:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" 体糗 泷茗翦: shut-down\n"
+"郁珥 屦屙 尻赀礴箸 栳 瘃蒺彘 磲 溴唪 翮 瘃雉耧疝 麸 瘃镢褴祆狒矧 "
+"尻赀礴箸 ."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-"燥 瘃镫腼 rusers 屦轸褫疱 篝秕 黢摅翦 屙 溟牯 磲 \n"
-"瘃矬溟锺唧秕 麸躜 篚礓邃屐蓓秕 黢摅翦 茈膣 篚篝珈荇."
+"轴唔弭衢 瘗 蓣弭 蓓 榴麽唢 躲睐篝颸n"
+"扃鬈礴灬, yaboot bootloader 溴 栳 滹蹼蔌彘 汩 筢.\n"
+" 邈赆糗篝狍 栳 篚礤鏖篝暹, 犭胲\n"
+"栳 黢彘狍翦 磲 黢珞殪镳镩摅弭 麸 BootX 汩 磲 铄觊磙箦翦 麸 扃鬈礴燔 筢"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"燥 瘃镫腼 rstat 屦轸褫疱 篝秕 黢摅翦 屙 溟牯 翮韁n"
-"篚腚镢 戾赳摅妁 屦殇妁 汩 镳镩镤摒雉 簖篝珈 箦 狨酎 \n"
-"麸 溥牯躏."
+msgid "Select file"
+msgstr "硼殡蓊翦 狁麇唢"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-" 躔珩弩哚 routed 屦轸褫疱 翮 狨酎灬翮 屙珈蓠 麸 疬磲赆 漶镬镫珞珧 \n"
-"IP 燧簌 麸 瘃镪腼 RIP. 嗅'  痫 麸 RIP 暹磲 艴褫 溟徜邃镬蓓 "
-"箦 \n"
-"扉犟 溥牯踽, 戾汜臊翦襻 溥牯踽 狃衢麸 疱耖痣镪羼 瘃镫脶."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"像轶禳 raw 篚箨艴  block 篚箨艴 ( 赆翎綮摅彘 箨腌颃韁n"
-"溥箨), 汩 翮 黢摅 麸躜 狃 弼狁祜爿  Oracle 篚箨艴蒡 DVD"
+"蚤 屙麸胼 狨糨 祓锺暹翦 屦唧珧 磲 糸 黢珞殪镳镩摅弭 篝 疱溥 \"彭麸朕 "
+"尻趱瘙箦\" 豉 溟犭 尻趱瘙箦 箦 痫腚蒡 弼狁祜爿, 犭胲 扃 疳褫麇翦 "
+"麸 镬 狁麇唢 邃 屦彘滢 麸 狁麇唢 瘃矧 尻酏瘗箸 麸 疳褫麇 弼狁祜戕.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"琉镨珀妪彘 赆 屦犴狯蓠彘 翮 痃戕 屙赳镳哚 麸 篚篝揿狒矧 汩 \n"
-"翮 溏扉秕胥哚 赆臊翦耒 痫辄翮翎 趱麽啭 狁殍忐."
+msgid "Japan"
+msgstr "舍瘗磉"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"燥 postfix 暹磲 蓓 瘃襻祆 戾翎鲲褴 犭腌腼泷狯哚, 麸 \n"
-"瘃襻祆 痫 鲴镯暨驽 汩 翮 戾翎鲲褴 犭腌腼泷狯哚 狃 麸 \n"
-"蓓 簖篝珈 篝 茈腼."
+msgid "Print option list"
+msgstr "抨酏瘗箸 脒篝 屦殡镢"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-" portmapper 溟狩彘襁驽翎 篚礓蒹彘 RPC, 镩 镳镞弪 黢珞殪镳镩稞眙衢\n"
-"狃 瘃镫脶  麸 NFS 赆 麸 NIS. 旭蒺彘 磲 暹磲 屙羼泔痫殓燧盹 箦 \n"
-"篚篝揿狒 痫 漶秕  孱躔珩弭玺蒡 糨麸轾 瘃镪膣."
+msgid "The change is done, but to be effective you must logout"
+msgstr " 犭脶戕 葶轫, 犭胲 汩 磲 轶鼾箦 栳 瘃蒺彘 磲 氵礤 狃矬溴箸"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-" 躔矬艮耖铉 PCMCIA 瘃矬鲚皴 躔矬艮耖铉 汩 贶耵弪 溟牯, 禳眙屐 觌 \n"
-"篚磙棂 箦 篚篝揿狒 laptop. 腻 栳 尻觊磙箦 尻酎 犴 狨酎 骁翮桢 狃 "
-"麸 \n"
-"黢摅翮, 镳 暹磲 狍鲠胼 磲 邈赆翎篝徼暹 箦 篚篝揿狒 痫 溴 麸 "
-"黢彘苕镯翎."
+msgid "Search servers"
+msgstr "另徭摁珞 溟彡镬轶酤"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "震矬艮耖铉 豉 OKI 4w 赆 篚焘狒 winprinters."
+msgid "NCP queue name missing!"
+msgstr "燥 镬 翮 NCP 秕褴 脲唣彘!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"刘酎灬翮 屙羼泔痫哏箸 麸 numlock 痣揸赳秕 篝珥 觑眢醆n"
-"赆 麸 XFree 赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧."
+"旭矬秣 犴轺礤珀 扉 茈腌 簖礓弩 篝 溟徜哧趱, 痫 唧 黢珞殪镳镩暹 麸 "
+"溥牯觞 筢"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"燥 NFS 暹磲 蓓 溏祜鲩胼 瘃镫腼 汩 麸 溟犰镩襻箪 狁麇啭 箦 \n"
-"溥牯踽 TCP/IP. 刘艮 躔珩弩哚 瘃矬鲚皴 脲轸秕胥咤 觌彘濑灬麸 狁麇啭."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom 镯狒 \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"燥 NFS 暹磲 蓓 溏祜鲩胼 瘃镫腼 汩 麸 溟犰镩襻箪 狁麇啭 箦 \n"
-"溥牯踽 TCP/IP. 刘艮 躔珩弩哚 瘃矬鲚皴 脲轸秕胥咤 孱躔珩弭玺, \n"
-"镳镞矧 聃桁哝弭衢 狃 麸 狁麇唢 /etc/exports."
+"琉镨珀妪彘 赆 屦犴狯蓠彘 翮 痃戕 屙赳镳哚 麸 篚篝揿狒矧 汩 \n"
+"翮 溏扉秕胥哚 赆臊翦耒 痫辄翮翎 趱麽啭 狁殍忐."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"彭羼泔痫殄/狃屙羼泔痫殄  翎 躔矬躞艮灬翎 溟牯 痫 蓣秕 \n"
-"聃桁轶翦 磲 铄觊盹 赆糗 翮 尻赀礴箸."
+"琉蒴貅 蓦邈黠 麸 篚篝揿狒矧 狁麇啭 %s. 容脲翦 磲 屦轶赍踯箦翦 翎 "
+"篥茈灬翎; (瘃矬秣, 祓锺暹 磲 鬈箦翦 溴滹燧磲)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"吁礓蒎 赆 狃矬蹴漭彘  翎 溟牯踽贶 篚篝揿狒 狁麇啭 (NFS), SMB (Lan\n"
-"Manager/Windows), 赆 NCP (NetWare) "
+msgid "Turn your computer into a reliable server"
+msgstr "体翎赳蔌翦 麸 扃鬈礴燔 筢 箦 蓓犴 犷辄痖篝 溟彡镬轶艮"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-" named (BIND) 暹磲 蓓狎 蓬躔珩弭玺掾 享狒矧 燥燧 (DNS) 痫 "
-"黢珞殪镳镩暹翎閈n"
-"汩 磲 戾翎赳蒺彘 镯狒 箦 溟艴椠眢彘 IP."
+msgid " (driver %s)"
+msgstr " (镤玢 %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Linux Virtual Server, 黢珞殪镳镩暹翎 汩 磲 溏扉秕胥摅彘 蓓犴 貘珉掾\n"
-"狃矬珧 赆 溟徼弩殪玺狎 孱躔珩弭玺."
+"榴麇唢 () loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "I don't know"
+msgstr "腻 钶聩"
+
+#: ../../printer/main.pm:1
#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP host \"%s\", 椠襻 %s"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"燥 lpd 暹磲 躔珩弩哚 尻趱瘙箦 痫 狃衢翦唪衢 汩 磲 脲轸秕胥暹 \n"
-" 屙麸朕 lpd. 胚磲 忉箝贶 蓓狎 孱躔珩弭玺掾 痫 瘃稆桢 翎 狁麇哚 \n"
-"篝秕 尻趱瘗糨."
+"陪赆糗篝狍鏫n"
+"\n"
+" 硼犴狯豉箸\n"
+"\n"
+"\n"
+"\n"
+" 想镪腌颃桤赍?"
-#: ../../services.pm:1
-#, c-format
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"燥 Linuxconf 赆扉 鲲褴 贶礤 溟荟锺弪 羼汜筮弪\n"
-"赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧 汩 磲 溟狒珩摅彘 翮 颀桁轶 麸 篚篝揿狒矧."
+"\n"
+"\n"
+" 孱' 锺轶祜"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
+msgid "Post Uninstall"
msgstr ""
-"刘酎灬翮 犴喵礤躞 赆 颀桁轶 篚箨艴 赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"刘酎灬翮 疳襻泫戕 翮 屦殛弼犭咪狎 麸 瘐褶磲 篝 /boot 汩 麸\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"刘酎 麸 疳贻麸 鲲耵彘 翮 屦殡邈燧礴 溟荇犷 痣珀赳镫镢唢 痫 蓣彘 \n"
-"屦殡邈暹 篝 /etc/sysconfig/keyboard. 刘酎 祓锺暹 磲 聃桁轶翦 戾 翮 \n"
-"黢摅 麸 羼汜脲唢 kbdconfig. 旭蒺彘 篦邃 疖眙 磲 暹磲 屙羼泔痫殓燧盹."
+msgid "Cpuid level"
+msgstr "硼唣邃 Cpuid"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"抨赀礴箸 疳贻麸 鲞媵耧 汩 麸 瘐褶磲 Linux 翮 箦轳茯 2.2, 汩 翮 "
-"颀桁轶鏫n"
-"屙 燥喵秕 旭矬翎筮狎 痫 栳 瘃矬翎翦 麸 扃鬈礴燔 筢 狃 溟牯踽贻 "
-"屦殍蒹彘."
+msgid "Mongolian (cyrillic)"
+msgstr "田沣镫殛 (术耖腚殛)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-" 躔珩弩哚 躔羼孱躔珩弭玺 拈徜殛酏秕 (inetd) 铄觊碥彘 扉 痫殛殡哚\n"
-"茈膣 躔珩弩辋 溟徜殛酏秕 雉 黢彘苕镯翎. 胚磲 躔妪桴礴 汩 翮 \n"
-"尻赀礴箸 痫腚 躔珩弩辋,  telnet, ftp, rsh 赆 rlogin. "
-"狃屙羼泔痫哏箸\n"
-"狨艮 翮 躔珩弩哚 狃屙羼泔痫殓桢 屦唧珧 赆 糸 躔珩弩咤 汩 糸 镳镞弪\n"
-"暹磲 躔妪桴礴."
+msgid "Add a module"
+msgstr "旭矬柁赙 狁桉狒矧"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-" Apache 暹磲 蓓狎 孱躔珩弭玺掾 WWW. 甜锺暹 磲 孱躔珩弭摅彘 狁麇哚\n"
-"HTML 赆 CGI."
+msgid "Profile to delete:"
+msgstr "旭秭唠 汩 溟徙襻鲛:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"燥 HardDrake 赳蓣彘 扉 犴喵礤躞 蹼殛稞 赆 瘃镝轳弭殛 聃桁哝彘\n"
-"麸 磔/犭脶沆蓓 蹼殛."
+msgid "Local measure"
+msgstr "燥痖贽 燧赳珞"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"燥 GPM 瘃矬栎翦 躔矬艮耖铉 痫眙殛轱 箦 弼狁祜爿 忉箝箪蓓弪 箦 觑眢醆n"
-"赍殪蓓秕 赆 屦轸褫疱 脲轸秕胥咤 狃镪镳掾 赆 屦殛腌箸 戾 黢摅 \n"
-"痫眙殛轱 篝珥 觑眢, 赆棹 赆 躔矬艮耖铉 犴徜躏燧睐 戾盹."
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"燥 cron 暹磲 扉 忉箝贽 躔珩弩哚 UNIX 痫 赳蓣彘 屙麸胼 赆栾耖箪蓓弪 狃 \n"
-"麸 黢摅翮 箦 翎牯 黢镯殛 溟狍艮灬翎. 燥 vixie cron 瘃矬栎翦 蓓犴 "
-"狁殍禳 \n"
-"屦轲胼镯 漉磲麸艮豉 痫 疱耖脶焘茼秕 赆臊翦耒 狍鲕脲獒 赆 痖 轶黪褫 "
-"聃桁唧彘."
+msgid "Account Login (user name)"
+msgstr "孙汜耖狍禳 育礓弩珧 (镬 黢摅翮)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"抨翦脲 屙麸胼 瘃镢襻祆狒轶燧礤 狃 翮 屙麸朕 at 赆 漭箪弪 屙麸膻韁n"
-"犴 鳇耵矧 麸 篚篝揿狒矧 暹磲 狁赍糗 麽扃朦."
+msgid "Fdiv bug"
+msgstr "遇茈灬 Fdiv"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"燥 apmd 疳襻觑腼蹊暹 赆 赆翎泷荟彘 翮 赆糗篝狍 翮 祓狒狁哚.\n"
-"甜锺暹 屦唧珧 磲 黢珞殪镳镩玷暹 汩 麸 狨酎灬麸 觌暹箝祜 麸 篚篝揿狒矧 箦 \n"
-"疱襁痿 麽扃朕 鳇耵轶珧 翮 祓狒狁哚."
+"氧桁轶艮 drakfirewall\n"
+"\n"
+"洛忉轾桢唪  蓣弭 聃桁唧彘 麸 倪牯躏/旭忉箸 拈徜殛酏秕 戾 翮 黢摅 麸 "
+"drakconnect 瘃轫 瘃秣摅弭."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, 蓓 瘃襻祆 疱耖镤殛掾 尻糨脲箸 屙麸膻."
+msgid "Benin"
+msgstr "甜屙唔"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "抨赀礴箸 麸 ALSA (Advanced Linux Sound Architecture) 篚篝揿狒矧 搠秕"
+msgid "Uruguay"
+msgstr "硝耧蹉秕茜"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Installing packages..."
-msgstr "陪赆糗篝狍 疳贻豉..."
+msgid "Path selection"
+msgstr "硼殡镢 容箸"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"遵摅: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
+msgstr "柬镬/IP 溟妪桴眢 麸 躔镫镢轶艮:"
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "翔: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"受糸 赆挈 篚焘徇礤 篝 溥箨 筢. \n"
+"疙 翦篝 咫葶黠 翮 彡羼衢玺狎 豉 溴滹燧睐 狃蒴貅. \n"
+"刘酎 箸灬唔彘 瘗 镳镩徜摒雉 邈泷狯 篝 溥箨 栳 赆翎朕铄 筢 趱麽哚 "
+"箨秕疬溟."
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Printer host name or IP missing!"
+msgstr "燥 溟牯踽挈 镬 麸 尻趱瘗艮 麸 IP 脲唣彘!"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check all users that you want to include in your backup."
msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"嗅襻赆膻 屦殡蓊翦 秕 黢摅翦 栎脲翦 磲 躔荞黠蹴 篝 犴暨泷狯 狍鲠脲哚"
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
+"燥 %s 瘃蒺彘 磲 聃桁轶翦 狃 麸 printerdrake.\n"
+"甜锺暹翦 磲 尻觊磙箦翦 麸 printerdrake 狃 麸 瘦眙耧 烹葶黠 Mandrake 狃 麸 "
+"綮揿 针殛."
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Bangladesh"
+msgstr "甜犴汴脶眙蒡"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Japan (cable)"
+msgstr "舍瘗磉 (梳膣溟彡)"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-" 倪牯躏 拈徜哧趱颸n"
+" 抨趱瘗艮 箱玢\n"
"\n"
-" 孱' 锺轶祜齖n"
+" 燥燧狎 Windows \n"
"\n"
+" 犴轺礤珀 燥燧狎 Windows \n"
"\n"
-" 戾糗 膺狎 戾糗 膺狎\n"
+" 燥燧狎 Windows \n"
"\n"
-"."
+" 硼屙 蛾躐."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Initial tests"
+msgstr "榴鏖贶 翦篝"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[痣珀赳镫轱]"
+msgid "Continue"
+msgstr "吁磔麇獒"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"\n"
-" 蓬躔珩弭玺掾\n"
-" 屙羼泔痫哏箸 屙羼泔痫哏箸\n"
-" 狃屙羼泔痫哏箸 狃屙羼泔痫哏箸\n"
-"\n"
-"\n"
-" 黢摅翮騖n"
-" 拈徙襻鲛 黢摅翮騖n"
-"\n"
-" 拈徙襻鲛"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Custom Restore"
+msgstr "旭矬狁祜箪蓓 硼犴狯锺"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 赆磔磲\n"
+"犴轺礤珀錦n"
"\n"
"\n"
"."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Script-based"
+msgstr "遵摅 script"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "遇茈灬 赆糗 翮 犴茔睐箸 麸 狁麇唢 %s"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "PLL setting:"
+msgstr "氧桁唧彘 PLL:"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "旭蒺彘 磲 蓣弭 扉 赆糗綮珞 FAT mounted 篝 /boot/efi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
+msgstr " 篝 "
+
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr " 溟妪桴眢 瘃蒺彘 磲 铄觊碥 戾 http:// https://"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
+"甜锺暹翦 磲 锺唧弭 赆翦蹊暹犴 麸 URI 汩 翮 瘃忉箸 篝镯 尻趱瘗艮. 燥 URI "
+"瘃蒺彘 磲 翮皴 暹翦 糸 CUPS 暹翦 糸 Foomatic 瘃镤獒泷狯蒡. 槛 瘗 溴 "
+"躔矬翮襁骘眙衢 镩 镩 URI 酏痫 狃  翎 spoolers."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "峨腼 脲轸秕胥殛 (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "陪赆糗篝狍/另徕荑扉箸"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d 疳贻翎"
#: ../../standalone.pm:1
#, fuzzy, c-format
@@ -7216,1673 +6704,1928 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "琉衢翦唪衢 虚篝镳镞珞 燥燧"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"\n"
-" 缅黹贶 朵彘醆n"
-"\n"
-"\n"
"\n"
"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
+msgstr ""
"\n"
-" 缅黹贶 朵彘醆n"
"\n"
-" 腌鲨蓓翎 缅黹贶 朵彘醆n"
+" 捧麽耖篝稞戾:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "割镤矧"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "另徕徼爝箦轵"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure services"
-msgstr "妖桁轶 躔珩弩辋"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure X"
-msgstr "妖桁轶 "
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install bootloader"
-msgstr "旭襻祆 尻赀礴箸"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure networking"
-msgstr "妖桁轶 溟牯"
-
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Add a user"
-msgstr "旭矬柁赙 黢摅翮"
+msgid "Costa Rica"
+msgstr "庶篝 堰赆"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Root password"
-msgstr "戍溟挈 Root"
+msgid "Use libsafe for servers"
+msgstr "遵摅 libsafe 汩 溟彡镬轶糨"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install system"
-msgstr "陪赆糗篝狍 篚篝揿狒矧"
+msgid "Icelandic"
+msgstr "审脶礓殛"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "硼殡镢 疳贻豉"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"遵摅: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Format partitions"
-msgstr "田聆镳. 赆翎綮摅."
+msgid "Please relog into %s to activate the changes"
+msgstr "嗅襻赆膻 屦犴狍蹴溴桢唪  %s 汩 屙羼泔痫哏箸 豉 犭脶泾"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "梳翎戾耖箪"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "硼殡蓊翦 痣珀赳镫轱"
+msgid "Lilo/grub mode"
+msgstr "隋轸秕胥哚 Lilo/grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select installation class"
-msgstr "硼殡蓊翦 邈赆糗篝狍"
+msgid "Output"
+msgstr "割镤矧"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "彭麸痖箪 溥箨秕"
+msgid "Circular mounts %s\n"
+msgstr "术觌殛蒡 篚礓蒹彘 %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "妖桁轶 痫眙殛轱"
+msgid "Martinique"
+msgstr "提耵轫哧"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "License"
-msgstr "朵彘 遵摅珧"
+msgid "HardDrive / NFS"
+msgstr "雨腌顸 倪箨矧 / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Language"
-msgstr "硼殡蓊翦 汶筢"
+msgid "a number"
+msgstr "蓓狎 狁殍禳"
-#: ../../ugtk2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid "Swedish"
+msgstr "语蹒溟挈"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "OK"
-msgstr "彭糗铄"
+msgid "Which %s driver should I try?"
+msgstr "酗辄 镤玢 %s 磲 滹觊燔簌;"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"柔 胲忮翦 扉 彘滹痫哏箸 遘 扉 狃 糸 屦殡邈燧礤 躔珩弩咤 疖 磲 "
+"尻翦脲唪衢"
-#: ../../ugtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Filesystem types:"
+msgstr "札痫 篚篝揿狒矧 狁麇啭:"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (镤玢 瘃镡镫掾 邈赆糗篝狍珧)"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", 痫膈黢珞糸贽 篚箨艴 篝 HP JetDirect"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 篝 XFree "
-"%s,\n"
-"醒嫌献: 信裳撂猎墒 招嫌郧焉吻 - 绦涎派 土 辛觅优 韵 招纤厦捎郧 恿."
+msgid "Northern Mariana Islands"
+msgstr "娃箫 嘛皴啭 提耖茼睐"
-#: ../../Xconfig/card.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 戾 信裳撂猎墒 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛"
+msgid "none"
+msgstr "赆磔磲"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 篝 XFree "
-"%s."
+msgid "user :"
+msgstr "黢摅翮 :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 戾 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛"
+msgid "Please enter your password"
+msgstr "嗅襻赆膻 彘筌沐翦 麸 犍溟挈 瘃忉箸"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 禳盹 戾 "
-"翎 XFree %s.\n"
-"醒嫌献: 信裳撂猎墒 招嫌郧焉吻 - 绦涎派 土 辛觅优 韵 招纤厦捎郧 恿!\n"
-" 贶耵 筢 躔矬翮襁驽翎 狃 翎 XFree %s 翎 镳镞 祓锺暹 磲 溥盹蹴 赆臊翦耒 "
-"躔矬艮耖铉 汩 溟溟荏翎翎 泷狯殛"
+"柬镬 汩 麸 瘃秭唠 痫 栳 溏扉秕胥玷暹 (麸 磔 瘃秭唠 溏扉秕胥暹翎 筢 "
+"犴暨泷狯 麸 躔荞黠眙矧):"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 禳盹 戾 "
-"翎 XFree %s.\n"
-" 贶耵 筢 躔矬翮襁驽翎 狃 翎 XFree %s 翎 镳镞 祓锺暹 磲 溥盹蹴 赆臊翦耒 "
-"躔矬艮耖铉 汩 溟溟荏翎翎 泷狯殛."
+msgid "Floppy"
+msgstr "拈箨蒴"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "RW"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "妖桁轶 禳盹 翮 贶耵狎 \"%s\" %s"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Ghostscript referencing"
+msgstr "Ghostscript"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "遵摅 屦蓐翎箸 Xinerama"
+msgid "Bootloader"
+msgstr "旭镢褴祆狒矧 尻赀礴箸"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "妖桁轶  豉 赍鲠膻 犴孱荞翮翎"
+msgid "Move"
+msgstr "体翎赀礴箸"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "蚤 颀桁轶 XFree 栎脲翦 磲 蓣弭;"
+msgid "Bootloader to use"
+msgstr "遵摅 瘃镢褴祆狒矧 尻赀礴箸"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "氧桁唧彘 XFree"
+msgid "SMB server host"
+msgstr "拈牯踽挈 镬 SMB 孱躔珩弭玺"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "硼殡蓊翦 麸 燧沐栾 祉揿珧 翮 贶耵狎 泷狯殛"
+msgid "Name Servers:"
+msgstr "柬镬 蓬躔珩弭玺:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, fuzzy, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
-" 蚤?"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Multi-head configuration"
-msgstr "妖桁轶 痫腚 赍鲠膻"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Choose an X server"
-msgstr "硼殡蓊翦 麸 孱躔珩弭玺 "
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "孱躔珩弭玺掾 X"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB 疱耖篌羼"
+" 旭矬秣轡n"
+"\n"
+"\n"
+" 恶礴箸\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 朵彘醆n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 体翎鲲褴\n"
+"\n"
+"\n"
+"\n"
+" 茧醆n"
+"\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "瘤徇皴箸 狨麸 麸 尻趱瘗艮 狃 麸 Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"Linux Virtual Server, 黢珞殪镳镩暹翎 汩 磲 溏扉秕胥摅彘 蓓犴 貘珉掾\n"
+"狃矬珧 赆 溟徼弩殪玺狎 孱躔珩弭玺."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "4 billion colors (32 bits)"
+msgstr "4 溟箦赆麸祆獒 黢狒 (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Micronesia"
+msgstr "涕犟镯珞哚"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "License"
+msgstr "朵彘 遵摅珧"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "This may take a moment to generate the keys."
+msgstr ""
+"甜锺暹 磲 黢彘狍麸 戾耖贶 脲痿 汩 翮 溏扉秕胥哚 豉 觌彘溟:To ../../"
+"standalone/drakbackup:1"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗糨 (燥痖觑, TCP/Socket, 赆 尻趱瘗糨 SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (戾 黢摅 麸 pppoa) usb"
-#: ../../Xconfig/main.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"拈狒揆珞 躔狁鼽眙 聃桁唧妁;\n"
-"祥 赳蓣秕箦 聃桁唧彘 暹磲:\n"
-"\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "硼殡镢蒡"
+"旭镪朕桤赍 篥茈灬 - 溴 怦蓁珀犴 篚箨艴蒡 篝轵 镳镞弪 磲 暹磲 漉磲艮 "
+"溏扉秕胥哚 磔 篚篝珈荇 狁麇啭. 嗅襻赆膻 咫葶铘 麸 蹼殛 筢 汩 翮 "
+"衢暨 狨麸 麸 瘃镡朕灬麸"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "娘觊燹"
+msgid "Starting the printing system at boot time"
+msgstr "抨赀礴箸 麸 篚篝揿狒矧 尻酏瘗箸 赆糗 翮 尻赀礴箸"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Resolution"
-msgstr "另茈躞"
+msgid "Do you want to start the connection at boot?"
+msgstr "容脲翦 磲 篚礓蒎篝 赆糗 翮 尻赀礴箸;"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Monitor"
-msgstr "翔"
+msgid "Processor ID"
+msgstr "葬豸玺 屦孱羼汜篝"
-#: ../../Xconfig/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "受耵 民狯殛"
+msgid "Sound trouble shooting"
+msgstr "硼唠躞 瘃镡腌燔豉 棍秕"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "吁黜玺 赆翎挈聃鲧 犴犴甍箸"
+msgid "Polish (qwerty layout)"
+msgstr "酗膣黹挈 (溟荇犷 qwerty)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "吁黜玺 锺殒糸狎 犴犴甍箸"
+msgid "activate now"
+msgstr "屙羼泔痫哏箸 酤襻"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"祥 潺 犟唧殪弪 疳褴戾赳镩 暹磲 篚黜玺 赆翎挈聃鲧 犴犴甍箸 暹磲 鏫n"
-"篚黜玺 戾 翮 镳镞 犴犴妣礤翎 镫腌耒 镨, 赆棹 赆 篚黜玺醆n"
-"锺殒糸狎 犴犴甍箸, 镳镞 暹磲 篚黜玺 戾 翮 镳镞 犴犴妣盹眙衢\n"
-"镩 锺殒糸弪 泷犰燧.\n"
"\n"
-"胚磲 邢苏 忧塘驮墒 磲 扃 屦殡蓊弭 酏痫 镨珧 麸 镳镞秕 镩 篚黜玺弪\n"
-"犴犴甍箸 暹磲 尻酎 豉 锺啭 翮 镨珧 筢: 躔荞麇 赀礓蹴矧 "
-"赆翎篝耧鲛騖n"
-"翮 镨珧 筢. 另 溴 暹篝 筮泔躐镩, 贶眙 扉 篚眙珩玺殛 屦殡镢."
+"鸟狍翮耖玺弪 Drakbackup 燧簌 CD:\n"
+"\n"
-#: ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
+"旭彘翎 磲 邈赆翎篝摅弭 麸 簖篝珈 尻酏瘗箸 %s 箦 蓓 簖篝珈 痫 蓣彘 "
+"屦唣邃 狍鲠脲哚 %s\n"
+"\n"
+"刘酎 麸 簖篝珈 尻酏瘗箸 尻翦脲 蓓犴 溽哽镯 (溟羼汜筮 篝 鳇眙) 痫 "
+"疱耖燧礤 糸 羼汜筮弪 尻酏瘗箸 赆 糸 溟狩彘襁驽翎. 刘酎 溽哽镯狎 "
+"暹磲 屦唧珧 瘃矬廛箝祜 狃 蓓 狃镬彡聃箪蓓 扃鬈礴灬 狃 麸 溥牯躏 赆 "
+"屦唧珧 暹磲 蓓 屙 漉碥戾 箸戾唢 屦哞弩珧. 瞄 狨酎 蓓狎 疱耖锺轶燧盹 "
+"狁殍禳 溽殪 铄觊碥 孱 锺轶祜 箦 狨酎 麸 屦唣邃 狍鲠脲哚.\n"
+"\n"
+"胚篝 廨忉轱  栎脲翦 磲 聃桁唧弭 翮 尻酏瘗箸 箦 狨酎 麸 扃鬈礴灬;"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vendor"
-msgstr "梳翎箨艴狍艮"
+msgid "Host \"%s\", port %s"
+msgstr "Host \"%s\", 椠襻 %s"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "鹅弩珧 麸痫栎翮箸 赆 脲轸秕胥哚"
+msgid "This partition can't be used for loopback"
+msgstr "刘艮 赆糗綮珞 溴 祓锺暹 磲 黢珞殪镳镩玷暹 汩 loopback"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "硼殡蓊翦 镨"
+msgid "File already exists. Use it?"
+msgstr "燥 狁麇唢 躔荞麇 掬. 歪 麸 黢珞殪镳镩摅;"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "受耵 泷狯殛: %s"
+msgid "received: "
+msgstr "腌鲨蓓翎:"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "硼殡蓊翦 犴茈躞 赆 廛栾 黢狒矧"
+msgid "Right Alt key"
+msgstr "腻铋 痣揸赳 Alt"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Resolutions"
-msgstr "另犭彘"
+msgid "the list of alternative drivers for this sound card"
+msgstr " 脒篝 戾 屙犭脶牯殛稞 镤玢稞 汩 翮 贶耵 搠秕 筢"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 溟箦赆麸祆獒 黢狒 (32 bits)"
+msgid "Gateway"
+msgstr "旋腌 溟牯"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 尻狒镬忑耖 黢狒 (24 bits)"
+msgid "Scanner sharing"
+msgstr "曙轫 黢摅 筢聩酤"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 鏖腴茕弪 黢狒 (16 bits)"
+msgid "Tonga"
+msgstr "渣汴"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 鏖腴茕弪 黢狒 (15 bits)"
+msgid "Tunisia"
+msgstr "怎礴筮"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 黢狒 (8 bits)"
+msgid "Profile: "
+msgstr "旭秭唠: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "胚磲 簌篝 颀桁轶;"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"受眙 觌殛 箦 扉 篚箨艴 篝 狁轶翦顸 綮揿 汩 磲 溴唪 邃 糸 "
+"痣珩秭锺咤."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "割镤矧 箦 %d 溴豸羼屦翎"
+msgid "XawTV isn't installed!"
+msgstr "燥 XawTV 邈赆翎篝荑珀!"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"嗅耧躞檐篝珀遢磲 篥茈灬:\n"
-"%s\n"
-"娘觊燔篝 磲 犭胲铄翦 戾耖贻 疳襻燧赳秕"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"旭矬秣: 滹觊燹 箦 狨艮 翮 贶耵 泷狯殛 祓锺暹 磲 疳泾箦 麸 "
-"躔镫镢轶艮 筢"
+"溺扉秕胥哚/体翎鲲褴\n"
+"犴糸泷荟 狍鲠脲哚 豉 觌彘溟 SSH"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "容脲翦 磲 滹觊燔箦翦 糸 聃桁唧彘;"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "座襁 翎 犟唧殪 狁麇哚 ( 犍溟觑, 镬茕弪, fstab)"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Test of the configuration"
-msgstr "娘觊燹 聃桁唧妁"
+msgid "old static device name used in dev package"
+msgstr "疳脶檐 篝狒殛 镬 篚箨艴掾 麸 疳贻麸 dev"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "酗轱 簖篝珈 黢珞殪镳镩暹 翮脲狍 筢;"
+msgid "This label is already used"
+msgstr "刘艮 弭殛蒴 黢珞殪镳镩暹翎 掬"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Do you have this feature?"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
+" 抨趱瘗艮 箱玢\n"
"\n"
"\n"
"\n"
+" 犴轺礤珀錦n"
"\n"
"\n"
-" 想镪腌颃桤赍?"
+"\n"
+" 硼屙 蛾躐."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
-"甜锺 磲 聃桁唧 麸 簖篝珈 筢 蒴箝 翦 磲 铄觊碥彘 狨酎灬翎 箦\n"
-"泷狯殛 疱耖廛腚镯 (XFree).\n"
-"硼殍蹯暹翦 翮 狨酎灬翮 尻赀礴箸 泷狯殛稞 疱耖廛腚镯麸;"
+"体糗 翮 祜聆镳镞珞 翮 赆糗綮珞珧 %s,  翎 溴滹燧磲 箦 狨艮 翮 "
+"赆糗綮珞 栳 麽栾"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "民狯殛 疱耖廛腚镯 篝珥 尻赀礴箸"
+msgid "Connection Time: "
+msgstr "狂 育礓弩珧: "
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "箱玢 XFree86: %s\n"
+msgid "select perm file to see/edit"
+msgstr "屦殡蓊翦 麸 狁麇唢 perm 汩 磲 麸 溴唪/屦孱羼汜篝暹翦"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "蓬躔珩弭玺掾 XFree86: %s\n"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"嗅襻赆膻 彘筌沐翦 麸 CD 邈赆糗篝狍珧 篝镯 镤玢 筢 赆 疳艮篝 彭糗铄 .\n"
+"跑 溴 麸 蓣弭, 疳艮篝 陵 汩 翮 狃秭蹉 溟牯踽贽 犴徕荑扉箸."
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "另茈躞: %s\n"
+msgid "Use group id for execution"
+msgstr "遵摅 id 镬茕狎 汩 尻糨脲箸"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "萝栾 黢狒矧: %s\n"
+msgid "Choose the default user:"
+msgstr "硼殡蓊翦 麸 瘃镥痖脲沆蓓 黢摅翮:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "添揿 贶耵狎 泷狯殛: %s kB\n"
+msgid "Gabon"
+msgstr "藐犰瘘"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "受耵 泷狯殛: %s\n"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"抨趱瘗糨 痫 暹磲 篚礓屐蓓镩 箦 狃镬彡聃箪蓓秕 孱躔珩弭玺蒡 CUPS 溴 "
+"黢彘苕弭衢 磲 聃桁轶麸 邃, 栳 犴轺礤蹊稞 狨酎灬翎."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "吁黜玺 赆翎挈聃鲧 犴犴甍箸: %s\n"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr ""
+"燥 Mandrake Linux 躔矬翮襁驽 痫腚狃胼 汶箦.硼殡蓊翦 \n"
+"糸 茈脲 汶箦 痫 栳 暹磲 溟徼蒹殪弪 戾糗 麸 疠襻 翮 \n"
+"邈赆糗篝狍珧 赆 翮 屦犴尻赀礴箸 麸 篚篝揿狒 筢."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "吁黜玺 锺殒糸狎 犴犴甍箸: %s\n"
+msgid "Domain"
+msgstr "燥燧狎"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "翔: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "陵耖廪 痫簏翮翎 祉揿珧 犴 黢彘苕弭衢 (屙麸疬篝珀犴 %d MB)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "吁箨艴 痫眙殛轱: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "札痫 痫眙殛轱: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "dns 2 嗅耧鬏 (瘃镝轳弭殛)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "拈荇犷 痣珀赳镫镢唢: %s\n"
+msgid "Boot device"
+msgstr "吁箨艴 尻赀礴箸"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "硼殡镢蒡: %s"
+msgid "Which partition do you want to resize?"
+msgstr "渝 糸 酏痫 赆糗綮珞珧 栎脲翦 磲 犭胲铄翦 燧沐栾;"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "隅戾唢 簖礓弩珧: "
+msgid "United States Minor Outlying Islands"
+msgstr "涕犟 狃镬镯蓓 礴箝 琼蓓 酗腴翦辋"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Server: "
-msgstr "蓬躔珩弭玺掾:"
+msgid "A tool to monitor your logs"
+msgstr "疙 羼汜脲唢 汩 磲 怆蒺弭 翎 log 筢"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr " 溟妪桴眢 瘃蒺彘 磲 铄觊碥 戾 http:// https://"
+msgid "Djibouti"
+msgstr "枣殪痫豸"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "嗅襻赆膻 彘筌沐翦 翮 溟妪桴眢 麸 孱躔珩弭玺 WebDAV"
+msgid "detected on port %s"
+msgstr "犴轺礤珀 篝珥 瘘耵 %s"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mount point"
-msgstr "隅戾唢 簖礓弩珧"
+msgid "LPD"
+msgstr "LPD"
-#: ../../diskdrake/dav.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Server"
-msgstr "蓬躔珩弭玺掾"
+msgid "Graphics card: %s\n"
+msgstr "受耵 泷狯殛: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Mount"
-msgstr "育礓弩"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unmount"
-msgstr "琉矬溴箸"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "嗅襻赆膻 锺唧翦 犴 贶礤翦 黢摅 篚箨艴掾 DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "New"
-msgstr "洼"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"孱躔珩弭玺掾\n"
-" 孱躔珩弭玺掾\n"
-" 孱躔珩弭玺掾\n"
-" 洼."
+msgid "Splash selection"
+msgstr "造揿 Splash"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "遵珞殪镳镩摅翦 ``%s'' 篝 栎箸 麸"
+msgid "Extended partition not supported on this platform"
+msgstr " 尻翦翎燧礴 赆糗綮珞 溴 躔矬翮襁驽翎 箦 狨酎 麸 酏痫 篚篝揿狒矧"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Type"
-msgstr "札痫"
+msgid "ISDN Configuration"
+msgstr "氧桁唧彘 ISDN"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "受眙 瘃 ``琉矬溴箸''"
+msgid "high"
+msgstr "狰珉"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Delete"
-msgstr "拈徙襻鲛"
+msgid "Internet Connection Sharing"
+msgstr "曙轫 育礓弩 拈徜殛酏秕"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Create"
-msgstr "溺扉秕胥哚"
+msgid "Choose file"
+msgstr "硼殡蓊翦 蓓 狁麇唢"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "札痫 篚篝揿狒矧 狁麇啭:"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"旭矬秣! 另轺礤珀 扉 掬 躔荞黠躞 颀桁轶 燥喵秕 旭矬翎筮狎. 后 "
+"黢彘狍麸 锺轶燧礤 麇轳镪唔玺弪 聃桁唧彘 戾糗 翮 邈赆糗篝狍."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "朵彘"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "抨酏瘗箸/旭忉箸 受耵狎 柱麸泷狯辋 篝 \"%s\""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows "
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"容脲翦 磲 屙羼泔痫檗箦翦 翮 尻酏瘗箸 篝秕 疳襻疖睐 尻趱瘗糨 箦 贶痫轱 "
+"茈腼 篝 麸痖挈 筢 溥牯躏;\n"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "硼殡镢 祜眙蓦秕 尻趱瘗艮"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "缅黹觑 酏痫 痫眙哧 PS2 戾 耧滠觊"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "Removing old printer \"%s\"..."
+msgstr "瘤徇皴箸 疳脶轱 尻趱瘗艮 \"%s\"..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Select a device !"
+msgstr "硼殡蓊翦 扉 篚箨艴 !"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Remove selected server"
+msgstr "瘤徇皴箸 屦殡邈燧盹 孱躔珩弭玺"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "腻 怦蓁珀犴 溥箨镩!"
+msgid "French Southern Territories"
+msgstr "冕腚殛蒡 忘糸弪 绣耖秣蒡"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please click on a partition"
-msgstr "嗅襻赆膻 贶眙 觌殛 箦 扉 赆糗綮珞"
+msgid "the vendor name of the processor"
+msgstr "麸 镬 赆翎箨艴狍艮 麸 屦孱羼汜篝"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+msgid "All data on this partition should be backed-up"
msgstr ""
-"各弭 扉 戾丬腌 赆糗綮珞 豉 MicroSoft Windows \n"
-"旭雉暹睐 瘃 磲 犭胲铄翦 麸 燧沐椟 翮騖n"
-"(受眙 觌殛 屦茼 翮 赆 屦殡蓊翦 \"岭脶戕 体爿栾躜\")"
+"旭蒺彘 磲 氵礤 犴暨泷狯 狍鲠脲哚  豉 溴滹燧睐 箦 狨艮 翮 赆糗綮珞"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose action"
-msgstr "硼殡蓊翦 瘃茴"
+msgid "Installing package %s"
+msgstr "陪赆糗篝狍 疳贻麸 %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "箱玢"
+msgid "Checking device and configuring HPOJ..."
+msgstr "鸽邈黠 赆 颀桁轶 翮 篚箨艴 HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"跑 箨镳妪弭 磲 黢珞殪镳镩摅弭 麸 aboot, 瘃矬蓊翦 磲 狯摅弭 咫妪桢耧 齄耧 "
-"(2048 麸戾唑 暹磲 狁赍麸)\n"
-"篝珥 狁鬓 麸 溥箨秕"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "嗅襻赆膻 贶眙 瘃 蓓 犴暨泷狯 狍鲠脲哚 豉 溴滹燧睐 筢"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read carefully!"
-msgstr "拈徕荏翦 瘃矬尻糸贶!"
+"瞄 磲 瘃矬栎箦翦 赆翎綮摅彘, 疳襻赆膻 溟徙褴 爝 蒴箝 翦 磲 暹磲 "
+"漉磲艮 瘃矬柁赙 尻翦翎燧礴 赆糗綮珞珧"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "孰彘溥 犟躔麸泷荟珞珧 (钺碥)"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+" 尻趱瘗艮 聃桁唧翮赍 狨酎灬翎 汩 瘃忉箸 篝轵 贶耵弪 狃镨揸艴箸 "
+"鳄麸泷狯辋 麸 狃 麸 躔镫镢轶艮 筢. 甜锺暹翦 磲 蓣弭 瘃忉箸 箦 狨糨 "
+"黢珞殪镳镩翎 麸 泷狯殛 瘃襻祆 \"MtoolsFM\" (体盹: \"碰狁祜爿騖" -> "
+"\"篷汜脲哚 榴麇啭韁" -> \"MTools File Manager\") 翮 屙麸朕 \"mtools"
+"\" (汩 疱耖篌羼弪 痣珩秭锺咤 痣珀赳镫镢摅翦 \"man mtools\" 篝 泷犰燹 "
+"屙麸膻). 柔 怦暹翦 糸 鳄麸泷狯咤 筢 篝镯 溥箨 \"p:\", 箦 溥箨秕 戾 "
+"翎 屦屙 泷莒灬翎 犴 蓣弭 疱耖篌羼秕 狃 蓓犴 尻趱瘗糨 HP 戾 贶耵弪 "
+"狃镨揸艴箸 鳄麸泷狯辋. 渝 狨艮 翮 疱襁痿, 篝 瘃襻祆 \"MtoolsFM\" "
+"祓锺暹翦 磲 屦殡蓊弭 戾翎铨 豉 溟徼蒹殪 泷犰燔豉 溥箨秕 戾 麸 疱溥 "
+"篝珥 茼 溴铋 泫磉 麸 赆翎朦泔 狁麇啭."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "孰彘溥 犟躔麸泷荟珞珧"
+msgid "Choose packages to install"
+msgstr "硼殡镢 疳贻豉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "葬 觌彘溟 犟躔麸泷荟珞珧 暹磲 犴镩"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""
-"刘酎 犍溟挈 瘃忉箸 暹磲 痫臊 狃朦 (瘃蒺彘 磲 蓣彘 麸蹼荀轶麸 %d "
-"麽襻牯揆弪)"
+"茧弪 镩 躔荞黠躞弪 赆翎綮摅彘 赆 翎 溴滹燧磲 麸躜 篝镯 溥箨 %s 栳 麽栾"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "硼殡蓊翦 麸 觌彘溥 犟躔麸泷荟珞珧 麸 篚篝揿狒矧 狁麇啭"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"腻 屦蒽彘礤 狁赍酎 齄耧 篝 簖篝珈 筢 汩 邈赆糗篝狍 犴徕荑扉箸 (%d "
+"> %d)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "孰彘溥 犟躔麸泷荟珞珧 篚篝揿狒矧 狁麇啭"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"受桢 尻趱瘗艮 黢彘苕弭衢 蓓 镬 (.. \"尻趱瘗艮騖").葬 疱溥 绣耖泷狯 "
+"赆 燥痫桢筮 溴 黢彘苕弭衢 磲 篚祓腌聩栾. 胚磲 狃胲 篦獒 汩 麸躜 "
+"黢摅翦."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "札痫: "
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"抨趱瘗艮 槛 抨趱瘗艮騖n"
+"\n"
+" 磔颸n"
+"."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "篝 赆碥腴 %d id %d\n"
+msgid "Bhutan"
+msgstr "甜秕糗"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "札痫 疬磲赆 赆翎綮摅妁: %s\n"
+msgid "Network interface"
+msgstr "吁箨艴 溟牯"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "倪箨镩 LVM %s\n"
+msgid "Reading printer data..."
+msgstr "另茔睐箸 溴滹燧睐 尻趱瘗艮..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Info: "
-msgstr "须珩秭锺咤: "
+msgid "Korean keyboard"
+msgstr "曙皴荇殛 须珀赳镫轱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "缅弭襁: %s 挲腴礓耧, %s 赍鲠胼, %s 麸戾唑\n"
+msgid "Not connected"
+msgstr "腻 篚礓蓁珀"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "梯沐栾: %s\n"
+msgid "Greek"
+msgstr "烹腌黹挈"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Read-only"
-msgstr "厅盹 汩 犴茔睐箸"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Device: "
-msgstr "吁箨艴: "
+msgid "Saint Kitts and Nevis"
+msgstr "俞轫 书趄 赆 洼忾"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"刘艮 暹磲 彘溟贽 Bootstrap\n"
-"赆糗綮珞 汩醆n"
-"dual-booting 麸 簖篝珈 筢.\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
+"ssh -i %s %s\\@%s\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"without being prompted for a password."
msgstr ""
+"硼轸貅掾 戾翎鲲褴\n"
+"后 磲 黢彘狍翦 磲 屦犭玷妪箦翦  祓锺暹翦 磲 瘃矬疱胲箦翦 麸 "
+"溟彡镬轶艮 戾:\n"
"\n"
+"ssh -i %s %s\\@%s\n"
"\n"
-" 箱玢\n"
+"鼯襁 磲 骁翮桢 犍溟挈 瘃忉箸."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "柬镬 狁麇唢 loopback: %s"
+msgid "Enable OF Boot?"
+msgstr "彭羼泔痫哏箸 OF 尻赀礴箸;"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "倪箨镩 RAID %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr ""
+"腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 麸 JFS 汩 赆翎綮摅彘 扉犟羼弪 狃 16MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "梯沐栾 chunk %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "吁黜玺 赆翎挈聃鲧 犴犴甍箸: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Level %s\n"
-msgstr "硼唣邃 %s\n"
+msgid "path"
+msgstr "栎箸"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount point"
+msgstr "隅戾唢 簖礓弩珧"
+
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"梳糗綮珞 尻赀礴箸 孱 锺轶祜齖n"
-" (狃 MS-DOS,  狃 lilo)\n"
+"嗅耧躞檐篝珀遢磲 篥茈灬:\n"
+"%s\n"
+"娘觊燔篝 磲 犭胲铄翦 戾耖贻 疳襻燧赳秕"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore system"
+msgstr "硼犴狯锺 篚篝揿狒矧"
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"榴麇唢 () loopback:\n"
-" %s\n"
+"刘糗 暹磲 翎 扃麽磙灬翎 秕 镩 麸痖贶 篚礓屐蓓镩 筢聩糨(珧) 瘃蒺彘 磲 "
+"暹磲 溟徼蒹殪镩:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "The DHCP end ip"
+msgstr " 翦脲豸徇 ip 麸 DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "吁礓邃屐蓓矧\n"
+msgid "Another one"
+msgstr "梳 茈腼"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not formatted\n"
-msgstr "领锺鲲痫哏麸騖n"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "田聆镳镩珈蓓矧\n"
+msgid "Colombia"
+msgstr "曙腼焘哚"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "数腴礓耧 狃 %d 甍 %d\n"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
+"择蓣秕箦 聃桁唧彘 麸 %s':\n"
+"\n"
+"倪牯躏: %s\n"
+"拈妪桴眢 IP : %s\n"
+"IP attribution: %s\n"
+"箱玢: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s 麸戾唑"
+msgid "Plug'n Play"
+msgstr "鹅弩珧 麸痫栎翮箸 赆 脲轸秕胥哚"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "梯沐栾: %s"
+msgid "Reunion"
+msgstr "彦秕黹"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "榴鬓: 麸燧狎 %s\n"
+msgid "Details"
+msgstr "隋痿镬蓠彘弪"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Name: "
-msgstr "柬镬: "
+msgid "For security reasons, it will be disconnected now."
+msgstr "瞄 朦泔躜 狍鲠脲哚, 栳 狃矬蹴溴桢唪 酤襻."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "虚栳睃 DOS 泷莒灬 溥箨秕: %s \n"
+msgid "Synchronization tool"
+msgstr "篷汜脲唢 吁泖耧黹箪稞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr " 赆糗綮珞 %s 暹磲 酤襻 沩艮  %s "
+msgid "Checking your system..."
+msgstr "鸽邈黠 麸 篚篝揿狒矧 筢..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "瘤徇皴箸 %s"
+msgid "Print"
+msgstr "抨酏瘗箸"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"\n"
+" 篚箨艴"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "另糸泷狯 %s"
+msgid "Mongolia"
+msgstr "田沣镫哚"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "体翎赀礴箸 狁麇啭 篝珥 磔 赆糗綮珞"
+msgid "Mounted\n"
+msgstr "吁礓邃屐蓓矧\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "民狯殛 疱耖廛腚镯"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Users"
+msgstr "硼犴狯锺 遵珞酤"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "孰彘溥 犟躔麸泷荟珞珧"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-" 赆糗腼泔 %s 疱耖蓣彘 掬 溴滹燧磲\n"
-"(%s)"
+" portmapper 溟狩彘襁驽翎 篚礓蒹彘 RPC, 镩 镳镞弪 黢珞殪镳镩稞眙衢\n"
+"狃 瘃镫脶  麸 NFS 赆 麸 NIS. 旭蒺彘 磲 暹磲 屙羼泔痫殓燧盹 箦 \n"
+"篚篝揿狒 痫 漶秕  孱躔珩弭玺蒡 糨麸轾 瘃镪膣."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Hide files"
-msgstr "琉聃 狁麇啭"
+msgid "Detected hardware"
+msgstr "针殛 痫 犴轺礤珀"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "体翎赀礴箸 狁麇啭 篝珥 磔 赆糗綮珞"
+msgid "Mauritius"
+msgstr "提躐哧轱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Myanmar (Burmese)"
+msgstr "涕犴燔"
+
+#: ../../fs.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid "Enabling swap partition %s"
+msgstr "彭羼泔痫哏箸 赆糗綮珞珧 swap %s"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-"体糗 翮 祜聆镳镞珞 翮 赆糗綮珞珧 %s,  翎 溴滹燧磲 箦 狨艮 翮 "
-"赆糗綮珞 栳 麽栾"
+"腻 躔荞麇 赆糗綮珞 FAT 汩 黢摅  loopback ( 溴 躔荞麇 狁赍酎 齄耧)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "琉衢翦唪衢 屦犴尻赀礴箸 汩 磲 弼狁祜篝稞 镩 犭脶爿"
+msgid "Armenian (old)"
+msgstr "榴戾黹挈 (疳腴)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr " 疬磲赆 赆翎綮摅妁 麸 溥箨秕 %s 栳 狃镨珀艴翦 篝镯 溥箨!"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"疙狎 尻趱瘗艮 戾 麸 镬 \"%s\" 躔荞麇 掬 篝 %s\n"
+"受眙 觌殛 篝 \"体翎鲲褴\" 汩 磲 麸 屦殛犭弭.\n"
+"硼唧珧 祓锺暹翦 磲 麸 濑箦翦 蓓 磔 镬 磲 麸 疳襻怆蔌弭 ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "琵皴箸"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "燥 疳贻麸 %s 暹磲 狃狁徇翮麸. 歪 邈赆翎篝徼暹;"
+msgid ", host \"%s\", port %s"
+msgstr ", host \"%s\",椠襻 %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "蚤 酏痫 赆糗綮珞珧;"
+msgid "Monaco"
+msgstr "田磲挈"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "旭矬秣: 刘艮 溟徜殛狍哚 暹磲 屦殛唔漉礴."
+msgid "%s formatting of %s failed"
+msgstr "%s 祜聆镳镞珞 麸 %s 狃蒴貅"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "chunk size"
-msgstr "燧沐栾 chunk"
+msgid "Partitioning failed: %s"
+msgstr " 赆糗綮珞 狃蒴貅: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "level"
-msgstr "屦唣邃"
+msgid "Canada (cable)"
+msgstr "梳磲溟挈 (梳膣溟彡)"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "device"
-msgstr "篚箨艴"
+msgid "Upgrade"
+msgstr "另徕荑扉箸"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Various"
-msgstr "拈荟锺"
+msgid "Workstation"
+msgstr "郁徼禳 篷汜筮狎"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount options"
-msgstr "硼殡镢蒡 簖礓弩珧"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"陪赆糗篝狍 疳贻麸 %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "燥 狁麇唢 躔荞麇 掬. 歪 麸 黢珞殪镳镩摅;"
+msgid "Kyrgyzstan"
+msgstr "书胥轶糗"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "体 翮 忉箝贽 翦觎珩啭箸 (篚黹篝荇衢!)"
+
+#: ../../services.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "燥 狁麇唢 黢珞殪镳镩暹翎 掬 狃 茈腼 loopback, 屦殡蓊翦 蓓 茈腼"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, 蓓 瘃襻祆 疱耖镤殛掾 尻糨脲箸 屙麸膻."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "宁篝 蓓 镬 狁麇唢"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"旭蒺彘 磲 蓣弭 扉 忉箝贽 赆糗綮珞.\n"
+"溺扉秕胥摅翦 屦殡蓊翦 扉 赆糗綮珞.\n"
+"体糗 锺唧翦  箸戾唢 簖礓弩珧 麸 `/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "札痫 篚篝揿狒矧 狁麇啭: "
+msgid "Proxy should be http://..."
+msgstr " proxy 瘃蒺彘 磲 暹磲 http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Size in MB: "
-msgstr "梯沐栾 箦 MB"
+msgid "South Africa"
+msgstr "忘糸矧 瘤耖贽"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "柬镬 狁麇唢 loopback: "
+msgid "Western Sahara"
+msgstr "孽糸贽 俞鬈襻"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "刘艮 赆糗綮珞 溴 祓锺暹 磲 黢珞殪镳镩玷暹 汩 loopback"
+msgid "Modify printer configuration"
+msgstr "岭脶戕 聃桁唧妁 尻趱瘗艮"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "镬 LVM;"
+msgid "Choose a partition"
+msgstr "硼殡蓊翦 赆糗綮珞"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new"
-msgstr "磔"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "硼殡蓊翦 蓓 躔荞黠 LVM 篝 镳镞 栳 氵礤 瘃矬柁赙"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "硼殡蓊翦 蓓 躔荞黠 RAID 篝 镳镞 栳 氵礤 瘃矬柁赙"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "体翎赀礴箸 赆糗綮珞珧 箦 孱蓦轭..."
+msgid "Please test the mouse"
+msgstr "嗅襻赆膻 滹觊燔篝 麸 痫眙哧"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "体翎赀礴箸 箦 孱蓦轭"
+msgid "Other Media"
+msgstr "峨脶 梯筢"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "渝 痫辄 麸燧 栎脲翦 磲 戾翎觊礴桢唪;"
+msgid "Backup system files"
+msgstr "另暨泷狯 狍鲠脲哚 麸 篚篝揿狒矧 狁麇啭"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "燥燧狎"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "渝 痫辄 溥箨 栎脲翦 磲 戾翎觊礴桢唪;"
+msgid "Qatar"
+msgstr "梳糗"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "体翎赀礴箸"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "洼 燧沐栾 箦 MB:"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"腻 祓锺暹翦 磲 屦殡蓊弭 狨酎 麸 疳贻麸 溟 溴 躔荞麇 狁赍酎 齄耧"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "硼殡蓊翦 麸 磔 燧沐栾"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "岭脶戕 戾爿栾躜"
+msgid "Dialing mode"
+msgstr "择矧 觌摅珧"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"体糗 翮 犭脶戕 戾爿栾躜 篝珥 赆糗綮珞 %s,  翎 溴滹燧磲 箦 狨艮 翮 "
-"赆糗綮珞 栳 麽栾"
+msgid "File sharing"
+msgstr "曙轫耒篝 狁麇哚"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"旭蒺彘 磲 氵礤 犴暨泷狯 狍鲠脲哚  豉 溴滹燧睐 箦 狨艮 翮 赆糗綮珞"
+msgid "Clean /tmp at each boot"
+msgstr "梳栳耖箪 /tmp 箦 贶桢 尻赀礴箸"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "刘艮 赆糗綮珞 溴 祓锺暹 ' 犭胲铄 燧沐栾."
+msgid "Malawi"
+msgstr "提胲秕"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "震镫镢轶禳 FAT filesystem bounds"
+msgid "Please choose your type of mouse."
+msgstr "嗅襻赆膻 屦殡蓊翦 酏痫 痫眙殛轱."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "酗 栎脲翦 磲 篚礓蒹弭 麸 %s;"
+msgid "class of hardware device"
+msgstr "觌荏 翮 篚箨艴掾 "
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"腻 祓锺 磲 狯衢褫簌 麸 箸戾唢 簖礓弩珧 赆棹 狨艮 赆糗綮珞 "
-"黢珞殪镳镩暹翎閈n"
-"汩 loopback. 瘤衢褫篝 瘃 麸 loopback"
+"刘糗 暹磲 翎 扃麽磙灬翎 秕 镩 麸痖贶 篚礓屐蓓镩 尻趱瘗糨(珧) 瘃蒺彘 磲 "
+"暹磲 溟徼蒹殪镩:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "酗 栎脲翦 磲 篚礓蒹弭 翮 篚箨艴 %s;"
+msgid "United Kingdom"
+msgstr "琼蓓 箩筮脲轱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "酗 栎脲翦 磲 篚礓蒹弭 麸 狁麇唢 loopback %s;"
+msgid "running"
+msgstr "尻翦脲唪衢"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "岭脶戕 狃 ext2 箦 ext3"
+msgid "default"
+msgstr "孱' 锺轶祜"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "酗轱 簖篝珈 狁麇啭 瘃雉殪荇;"
+msgid "Indonesia"
+msgstr "身滹礴筮"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "岭脶戕 酏痫 赆糗綮珞珧"
+msgid "France [SECAM]"
+msgstr "冕腚哚 [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "狃徙艴箸"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "瘃蒺彘 磲 躔荞麇"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"体糗 翮 犭脶戕 酏痫 篝珥 赆糗綮珞 %s,  翎 溴滹燧磲 箦 狨艮 翮 "
-"赆糗綮珞 栳 麽栾"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "歪 狯衢皴桢 麸 狁麇唢 loopback;"
+msgid "Senegal"
+msgstr "渝礤丬腌"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "民犰燹 屙麸膻"
+
+#: ../../share/advertising/08-store.pl:1
#, fuzzy, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"磔颸n"
-" 瘃妪秕筢\n"
-" 瘃妪秕筢."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr "Linux:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "旭雉哽珞: "
+msgid "access to administrative files"
+msgstr "瘃忉箸 箦 溟狩彘耖篝殛 狁麇哚"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "榴鏖挈 麸燧狎: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"遇茈灬 篝 sendmail\n"
+" 犴狯锺 溴 篝茈桤赍\n"
+" 疳襻赆膻 聃桁唧翦 麸 sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "溺扉秕胥哚 磔狎 赆糗綮珞珧"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", 痫膈黢珞糸贽 篚箨艴 篝珥 疳褴腚珉 柁襻 \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "遵摅 汩 loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "择镳镳镞珞 RAID"
+msgid "Montserrat"
+msgstr "田眢羼荇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "瘤徇皴箸 狃 麸 LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "瘤徇皴箸 狃 麸 RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "旭矬柁赙 篝 LVM"
+msgid "Connecting to the Internet "
+msgstr "育礓弩 篝 拈徜哧趱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "旭矬柁赙 篝 RAID"
+msgid "Restore Other"
+msgstr "硼犴狯锺 峨膣"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "田聆镳镞珞"
+msgid "TV card"
+msgstr "受耵 TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "隋痿镬羼暹 痣珩秭锺咤"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "抨趱瘗艮 箦 孱躔珩弭玺 SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "旭矬疖桢獒 溟荏珧 疬磲赆 赆翎綮摅妁"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"砰筌沐翦 扉 溟箨蒴 篝镯 镤玢 溟箨蒴狎\n"
-"茧 翎 溴滹燧磲 箦 狨艮 翮 溟箨蒴 栳 麽栾"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "旭矬秣"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "硼殡蓊翦 狁麇唢"
+msgid "Remove selected host/network"
+msgstr "瘤徇皴箸 屦殡邈燧盹 躔镫镢轶艮/溥牯躏"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-" 弼邃耖挈 疬磲赆 赆翎綮摅妁 蓣彘 溟狯锺弭殛 燧沐栾騖n"
-"歪 篚礤鬟簌;"
+"燥 postfix 暹磲 蓓 瘃襻祆 戾翎鲲褴 犭腌腼泷狯哚, 麸 \n"
+"瘃襻祆 痫 鲴镯暨驽 汩 翮 戾翎鲲褴 犭腌腼泷狯哚 狃 麸 \n"
+"蓓 簖篝珈 篝 茈腼."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "刘酎灬翮 簖礓弩 狃矬瘙戾睐 祜碥澌"
+msgid "Disconnection from the Internet failed."
+msgstr " 狃矬溴箸 狃 麸 溟徜哧趱 狃蒴貅."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "另犴甍箸 疬磲赆 赆翎綮摅妁"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"配 祓锺暹翦 磲 屦殡蓊弭 麸 痣揸赳 麸 篚礓踽箪黒n"
+"痣揸赳 屙犭脶戕 豉 溟狒茴妁 痣珀赳镫镢啭韁n"
+"(.. 零汶殛 烹腌黹贽)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Rescue partition table"
-msgstr "羞磲赆 赆翎綮摅妁 溟荏珧"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "氧桁唧彘 溟牯"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "硼犴狯锺 疬磲赆 赆翎綮摅妁"
+msgid "if set to yes, reports check result to tty."
+msgstr "犴 锺轶翦 磲, 狃雉蓦弩灬 犴狯锺茯 咫葶黠 篝 tty"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "琉镨揸艴箸 疬磲赆 赆翎綮摅妁"
+msgid "Restore From CD"
+msgstr "硼犴狯锺 狃 CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"瞄 磲 瘃矬栎箦翦 赆翎綮摅彘, 疳襻赆膻 溟徙褴 爝 蒴箝 翦 磲 暹磲 "
-"漉磲艮 瘃矬柁赙 尻翦翎燧礴 赆糗綮珞珧"
+"旭彘翎 磲 聃桁唧弭 麸 躔镫镢轶艮 筢 汩 磲 祜轳苕弭衢 翮 簖礓弩 麸 "
+"篝 拈徜哧趱.\n"
+"体 狨艮 翮 漉磲酎翮翎 茈腼 躔镫镢轶糨 篝 麸痖挈 筢 溥牯躏 栳 祓锺稞 "
+"磲贶盹蹴 黢摅 翮 簖礓弩珧 狨麸 麸 躔镫镢轶艮 篝 拈徜哧趱.\n"
+" \n"
+"洛忉轾桢唪  蓣弭 聃桁唧彘 麸 倪牯躏/旭忉箸 拈徜殛酏秕 戾 翮 黢摅 麸 "
+"drakconnect 瘃轫 瘃秣摅弭.\n"
+"\n"
+"隅. 柔 瘃蒺彘 磲 蓣弭 扉 贶耵 溟牯 汩 磲 聃桁唧弭 麸 燥痖挈 筢 "
+"倪牯躏 (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "腻 祓锺 磲 瘃矬栎簌 赆翎綮摅彘"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 痫獒 篚箨艴 溟牯 栎脲翦 磲 黢珞殪镳镩摅弭 汩 翮 "
+"簖礓弩 篝 拈徜哧趱"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "茧弪 镩 瘃妪秕箦 赆翎綮摅彘 暹磲 箦 黢摅"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "须珩秭锺咤 箨腌耧 溥箨秕"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr "Linux"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "刘酎灬翮 赆翎盹燹"
+msgid "Internet Connection Sharing is now disabled."
+msgstr " 曙轫 育礓弩 拈徜殛酏秕 酤襻 狃屙羼泔痫檗桤赍."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "梳栳耖箪 "
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "犴 锺轶翦 磲, 屦犭掼艴箸 checksum 汩 翎 狁麇哚 suid/sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "容脲翦 磲 狃镨珀妪箦翦 糸 犭脶爿 麸 /etc/fstab"
+msgid "Latin American"
+msgstr "酸糸黹贽 领羼殛掾"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "割镤矧 鼯襁 狃镨揸艴箸 麸 疬磲赆 赆翎綮摅妁;"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "岭脶戕 篚篝揿狒矧 尻酏瘗箸"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "割镤矧 鼯襁 狃镨揸艴箸"
+msgid "Old device file"
+msgstr "嗅脶辄 狁麇唢 篚箨艴掾"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "歪 篚礤鬟簌;"
+msgid "Info: "
+msgstr "须珩秭锺咤: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "岭脶戕 箦 瘃秣珈蓓 赳 脲轸秕胥哚"
+msgid "Button `%s': %s"
+msgstr "须揸赳 `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "岭脶戕 箦 赆盹黹挈 赳 脲轸秕胥哚"
+msgid "Please wait"
+msgstr "嗅襻赆膻 疱耖燧礤翦"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "另徇皴箸"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "割镤矧"
+msgid "None"
+msgstr "梳磔磲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "硼殡蓊翦 赆糗綮珞"
+msgid "The entered IP is not correct.\n"
+msgstr " 溟妪桴眢 IP 痫 彘筌汜翦 溴 暹磲 簌篝.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "硼殡蓊翦 茈腌 赆糗綮珞"
+msgid "Ethernet Card"
+msgstr "受耵 Ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "岭脶戕 酏痫"
+msgid "Info"
+msgstr "须珩秭锺咤"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "另徭摁珞 溟彡镬轶酤"
+msgid "Install"
+msgstr "陪赆糗篝狍"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "燥燧狎"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"受眙 觌殛 篝 \"硼屙 ->\" 遘 栎脲翦 磲 溟徙褴翦  翎 溴滹燧磲\n"
+"糸 赆翎綮摅彘 痫 怦唧觑眙衢 篝镯 箨腌顸 筢 溥箨. 旭矬秣 戾糗\n"
+"痫 栳 觌殛 篝 \"硼屙 ->\"溴 栳 祓锺暹翦 磲 犴彡艮箦翦 翎 溴滹燧磲\n"
+"赆 糸 赆翎綮摅彘 痫 怦唧觑眙衢 篝镯 溥箨 灬孢 赆 翎 Windows\n"
+" 硼屙颸n"
+"\n"
+"受眙 觌殛 篝 \"<- 旭镧泔屙颸" 汩 磲 翦耢狒唧弭 翮 脲轸秕胥哚 狨艮\n"
+"鼯襁 磲 鬈箦翦 翎 溴滹燧磲 赆 糸 赆翎綮摅彘 筢 篝 溥箨."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "柬镬 黢摅翮"
+msgid "Exit install"
+msgstr "割镤矧"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"嗅襻赆膻 彘筌沐翦 麸 镬 黢摅翮 麸 犍溟挈 瘃忉箸 赆 麸 镬 麸燧 "
-"汩 翮 簖礓弩 篝镯 host."
+"茧 蓣秕 聃桁轶翦.\n"
+"甜锺暹翦 酤襻 磲 祜轳苕弩翦 翮 簖礓弩 筢 篝 拈徜哧趱 戾 茈腼躜 "
+"躔镫镢轶糨 篝 麸痖挈 筢 溥牯躏, 戾 翮 黢摅 狨酎灬翮 颀桁轶珧 溟牯 "
+"(DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "琉衢翦唪衢 虚篝镳镞珞 燥燧"
+msgid "Remote CUPS server"
+msgstr "琉镬彡聃箪蓓矧 孱躔珩弭玺掾 CUPS"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "梳 茈腼"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "酗唢 镬 黢摅翮"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"震荞麇 禳盹 蓓狎 聃桁轶燧盹 瘃矬狁祜爿狎 溟牯 篝 簖篝珈 筢:\n"
+"\n"
+"%s\n"
+"\n"
+"柔 聃桁轶翦 麸 燥痖挈 筢 倪牯躏 戾 狨酎 麸 瘃矬狁祜爿."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "龄蹴犰哚 瘃矬疠脶箸 戾 麸 镬 黢摅翮 %s (胲栾 犍溟挈)"
+msgid "Minimal install"
+msgstr "烹荀轶翮 陪赆糗篝狍"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "屦孱羼汜篝掾 # "
+msgid "Ethiopia"
+msgstr "灵栝镳哚"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "烹邈牯蒡 SMBus"
+msgid "Devanagari"
+msgstr "腻忉磲汜耖挈"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "烹邈牯蒡 USB"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- 篚箨艴蒡 pci: 溥礤 翮 椠襻 PCI, 翮 篚箨艴 赆 脲轸秕胥哚 狨艮 翮 "
+"贶耵狎\n"
+"- 篚箨艴蒡 eide: 篚箨艴 暹磲 篚箨艴 slave master\n"
+"- 篚箨艴蒡 scsi: 溥狨腼 scsi 赆 翎 麽襻牯珩轶糸贶 翮 篚箨艴掾 scsi"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "咫邈牯蒡 SCSI"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "烹邈牯蒡 USB"
+msgid "Total size: %d / %d MB"
+msgstr "吁盹腴挈 燧沐栾: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "咫邈牯蒡 (E)IDE/ATA"
+msgid "disabled"
+msgstr "狃屙羼泔痫殓燧盹"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Search for new scanners"
+msgstr "另徭摁珞 汩 磔秕 筢聩糨"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanner"
-msgstr "俞聩艮"
+msgid "Disabling servers..."
+msgstr "琉屙羼泔痫哏箸 孱躔珩弭玺..."
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "躲睐篝/峨腼"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 麸 \n"
+"溟荏翮灬 戾翎铨 麸 贶桢\n"
+"犴暨泷狯秕 狍鲠脲哚"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr " 邈赆糗篝狍 麸 %s 狃蒴貅. 旭镪朕桤赍 麸 彡秕栾 篥茈灬:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Modem"
-msgstr "厅眙屐"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "龄蹴犰哚 尻赀礴箸 mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "受耵 拈牯 Ethernet"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"各弭 屦殡蓊彘 麸躜 疳襻贶豉 溟彡镬轶糨(): %s\n"
+"\n"
+"\n"
+"刘麸 镩 溟彡镬轶糨 暹磲 孱 锺轶祜 屙羼沐. 腻 蓣秕 贶痫轱 沩酎 "
+"瘃腌灬\n"
+"狍鲕脲獒, 犭胲 祓锺稞 磲 怦彖稞 磔. 渝 狨艮 翮 疱襁痿 忮忉轾桢唪 "
+"閈n"
+"蓣弭 邈赆翎篝摅彘 翮 翦脲豸徇 蓐滹箸 麸 篚眙镬羼.\n"
+"\n"
+"\n"
+"胚篝 廨忉轱 汩 翮 邈赆糗篝狍 狨酤 豉 溟彡镬轶酤;\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Processors"
-msgstr "硼孱羼汜篝蒡"
+msgid "Network printer (TCP/Socket)"
+msgstr "抨趱瘗艮 溟牯 (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Backup User files..."
+msgstr "另暨泷狯 馏鲠脲哚 豉 狁麇啭 遵珞酤..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "受耵 搠秕"
+msgid "Install system"
+msgstr "陪赆糗篝狍 篚篝揿狒矧"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "峨脶 篚箨艴蒡 酗膈燧簌"
+msgid "First DNS Server (optional)"
+msgstr "旭矧 孱躔珩弭玺掾 DNS (瘃镝轳弭殛)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "受耵 TV"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"彭犭脶牯殛, 祓锺暹翦 磲 彘筌沐翦 蓓 镬 篚箨艴掾/狁麇唢 篝 泷犰燹 "
+"彘筢泫戕"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Videocard"
-msgstr "受耵 镨珧"
+msgid "dhcpd Config..."
+msgstr "妖桁轶 dhcpd..."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Tape"
-msgstr "葬轫哚"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr " 颀桁轶 蓣彘 掬 氵礤, 犭胲 狨艮 翮 篝殂燹 暹磲 狃屙羼泔痫殓燧礴."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "LILO/grub Installation"
+msgstr "陪赆糗篝狍 LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "吁箨艴蒡 邈泷狯掾 CD/DVD"
+msgid "Israeli"
+msgstr "审襻揠"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "load setting"
+msgstr "贮耵 聃桁唧妁"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disk"
-msgstr "倪箨矧"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "抨趱瘗艮 \"%s\"篝镯 孱躔珩弭玺 \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Floppy can be removed now"
+msgstr "轧襻 祓锺暹翦 磲 狯衢褫篝 翮 溟箨蒴"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "烹荀轶翮 陪赆糗篝狍"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "拈箨蒴"
+msgid "Denmark"
+msgstr "尼磉"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "柔 溟犭蓊 邈 镤玢"
+msgid "Moving partition..."
+msgstr "体翎赀礴箸 赆糗綮珞珧 箦 孱蓦轭..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "箱玢:"
+msgid "(This) DHCP Server IP"
+msgstr "(刘艮 翮) IP 麸 孱躔珩弭玺 DHCP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "娘觊燹 聃桁唧妁"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Installing %s ..."
+msgstr "陪赆糗篝狍 %s ..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
"\n"
"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
"\n"
+" 孱躔珩弭玺掾\n"
+" 响茕 羼汜筮狎:\n"
+"\n"
+" 孱' 锺轶祜 Linux\n"
"\n"
"\n"
+" Linux\n"
+"\n"
+" 槛 歪閈n"
"\n"
" 孱' 锺轶祜齖n"
"\n"
+" 狃屙羼泔痫哏箸\n"
"\n"
"\n"
"\n"
-" 屙羼泔痫哏箸\n"
"\n"
"\n"
"\n"
@@ -8891,3141 +8634,3302 @@ msgstr ""
"\n"
"\n"
"\n"
+"."
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "硼唠躞 瘃镡腌燔豉 棍秕"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "遇茈灬: 镤玢 \"%s\" 翮 贶耵狎 搠秕 筢 溴 躔荞麇 篝 脒篝"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unkown driver"
-msgstr "躲睐篝矧 镤玢"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "腻 躔荞麇 贶痫轱 沩酎 镤玢 汩 翮 贶耵 搠秕 筢 (%s)"
-
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No known driver"
-msgstr "梳磔磲 沩酎 镤玢"
+msgid "Choose your filesystem encryption key"
+msgstr "硼殡蓊翦 麸 觌彘溥 犟躔麸泷荟珞珧 麸 篚篝揿狒矧 狁麇啭"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"腻 躔荞麇 沩酎 屙犭脶牯殛 镤玢 OSS/ALSA 汩 翮 贶耵 搠秕 筢 (%s)"
+"篚箨艴轡n"
+"\n"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No open source driver"
-msgstr "梳磔磲 镤玢 犴镩黥稞 掰溟赆"
+msgid "Andorra"
+msgstr "另潼襻"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "嗅襻赆膻 疱耖燧礤翦... 碰狁祜戕 聃桁唧妁"
+msgid "Sierra Leone"
+msgstr "娱蓠襻 隋"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" 磔."
+#: ../../lang.pm:1
+#, c-format
+msgid "Botswana"
+msgstr "甜雉箫踯磲"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Trouble shooting"
-msgstr "硼唠躞 瘃镡腌燔豉"
+msgid "(default value: %s)"
+msgstr "(旭镥痖脲沆蓓 糸燹: %s)"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"育篝珈醆n"
-" 蚤\n"
-"\n"
-" 瞄 旭秣珈蓓秕 Linux\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 磔"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (Letter)"
+msgstr "彭犭脶牯殛 滹觊灬篝殛 箦脒溽 (Letter)"
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakgw:1
+#, c-format
msgid ""
+"DHCP Server Configuration.\n"
"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
msgstr ""
+"妖桁轶 蓬躔珩弭玺 DHCP\n"
"\n"
+"配 祓锺暹翦 屦殡蓊弭 糸 溟荟锺弪 屦殡镢蒡 篝 颀桁轶 麸 孱躔珩弭玺 "
+"DHCP\n"
+"另 溴 钶皴翦 糸 箸灬唔彘 狨酎, 狃胲 狯摅翦 麸  蓣彘\n"
"\n"
-" 孱' 锺轶祜"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"配 祓锺暹翦 磲 屦殡蓊弭 蓓犴 屙犭脶牯殛 镤玢 (OSS ALSA) 汩 翮 贶耵 "
-"搠秕 筢 (%s)"
+msgid "Choose an X server"
+msgstr "硼殡蓊翦 麸 孱躔珩弭玺 "
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "妖桁轶 搠秕"
+msgid "Swap partition size in MB: "
+msgstr "梯沐栾 赆糗綮珞珧 swap 箦 MB"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"腻 躔荞麇 沩酎 屙犭脶牯殛 镤玢 OSS/ALSA 汩 翮 贶耵 搠秕 筢 (%s)"
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr "峨腼\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No alternative driver"
-msgstr "梳磔磲 屙犭脶牯殛 镤玢"
+msgid "No changes to backup!"
+msgstr "腻 躔荞黠蹴 犭脶爿 汩 磲 氵盹蹴 犴暨泷狯 狍鲠脲哚!"
-#: ../../harddrake/v4l.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable radio support"
-msgstr "屙羼泔痫哏箸 襻溟秭秕"
+msgid "Formatted\n"
+msgstr "田聆镳镩珈蓓矧\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "震矬艮耖铉 襻溟秭秕:"
+msgid "Type of install"
+msgstr "札痫 邈赆糗篝狍珧"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "氧桁唧彘 PLL:"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "抨趱瘗艮 \"%s\" 箦 孱躔珩弭玺 SMB/Windows \"%s\""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
+"\n"
+"- 尼哽镯狎 (%s) 灬孢 戾 :\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "%d comma separated numbers"
+msgstr "%d 狁殍祜 鼯耖箪蓓镩 戾 挈祆"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Tuner type:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"燥 瘃镫腼 rusers 屦轸褫疱 篝秕 黢摅翦 屙 溟牯 磲 \n"
+"瘃矬溟锺唧秕 麸躜 篚礓邃屐蓓秕 黢摅翦 茈膣 篚篝珈荇."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Card model:"
-msgstr "田眙蓦 贶耵狎:"
+msgid "Automatic Steps Configuration"
+msgstr "妖桁轶 刘酎灬豉 络燔豉"
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
#, fuzzy, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Linux\n"
-" 戾糗 膺狎."
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "躲睐篝飢缅黹挈"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "躲睐篝飢CPH06X (bt878) [痫腚镞 赆翎箨艴狍糨騗"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "躲睐篝飢CPH05X (bt878) [痫腚镞 赆翎箨艴狍糨騗"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Auto-detect"
-msgstr "刘酎灬翮 犴喵礤躞"
-
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Do"
-msgstr "受眙"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr " 屦殡镢 筢; (孱 锺轶祜 %s)"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr "容脲翦 磲 燔桢翦 疱耖篌羼 汩 翮 觑轫玺 另镩黥稞 漱溟赆;"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "梳贽 屦殡镢, 钺磲滹觊燔篝錦n"
+msgid "Barbados"
+msgstr "甜狁祓茼麸"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Re-submit"
-msgstr "砰筌沐翦 钺碥"
+msgid "Please select data to backup..."
+msgstr "嗅襻赆膻 屦殡蓊翦 翎 狁麇哚 痫 栳 氵盹蹴 犴暨泷狯 狍鲠脲哚"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> 隅.:扉 弭殛蒴 茈脶铄:\n"
-"%s"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"屦孱羼汜筮醆n"
-"\n"
-" "
+" 簖礓弩 狃蒴貅.\n"
+"硼犭玷妪篝 糸 聃桁唧彘 筢 篝 瘦眙耧 烹葶黠 Mandrake."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> 震荞黠蹴 痫腚 瘃茔灬翎 狃 翎 镳镞 祓锺暹翦 磲 屦殡蓊弭 (%s).\n"
+msgid "received"
+msgstr "腌鲨蓓翎"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr " 屦殡镢 筢; (孱 锺轶祜 `%s'%s) "
+msgid "/File/_New"
+msgstr "/榴麇唢/_洼"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "彘筌沐翦 翮 胼铉 `void' 汩 赍磙 彘筢泫戕"
+msgid "The DNS Server IP"
+msgstr " IP 麸 孱躔珩弭玺 DNS"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "容脲翦 磲 贶礤翦 觌殛 箦 狨酎 麸 觑蹯疬;"
+msgid "IP Range End:"
+msgstr "捡轱 藻耢狒轶祜 IP:"
-#: ../../interactive/stdio.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "须揸赳 `%s': %s"
+msgid "High"
+msgstr "狰珉"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr " 屦殡镢 筢; (0/1, 孱 锺轶祜 %s)"
+msgid "NoVideo"
+msgstr "座襁騐ideo"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"绣溥 痫 栳 瘃蒺彘 磲 篚祓腌颃箦翦:\n"
-"%s"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "刘酎 疱溥 疱耖泷狯 翮 篚箨艴"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-" 鳇耵 麸 狁桉狒矧 %s 狃蒴貅.\n"
-"容脲翦 磲 滹觊燔箦翦 钺碥 戾 溟狯锺弭殛蒡 疳襻燧赳秕;"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "眠礤翎 瘃矬柁赙 麸 尻趱瘗艮 篝 Star Office/OpenOffice.org/GIMP"
-#: ../../modules/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Specify options"
-msgstr "旭矬溟锺轶禳 疳襻燧赳"
+msgid "Local Printers"
+msgstr "燥痖觑 尻趱瘗糨"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Autoprobe"
-msgstr "刘酎灬翮 孱蒴狍"
+msgid "Installation image directory"
+msgstr "陪赆糗篝狍 赆翎朦泔 彘挈磲"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"渝 戾耖贻 疱耖痿彘, 镤玢 %s 黢彘苕弭衢 屦轲胼镯 疳襻燧赳秕 汩醆n"
-"磲 脲轸秕胥摅彘 簌篝, 疳'  痫 篚磙棂 脲轸秕胥暹 赆 鼯襁 狨糨.\n"
-"柔 栎脶翦 磲 濑箦翦 屦轲胼镯 屦殡镢蒡 磲 狯摅弭 麸 镤玢 磲 孱弭荏彘\n"
-"麸 蹼殛 筢 汩 糸 疳襻燧赳秕 痫 黢彘苕弭衢; 孱蒴狍 狨艮 唧\n"
-"瘃镪犭蒹彘 疖泫灬 麸 篚篝揿狒矧, 犭胲 溴 栳 瘃镪犭蒹彘 怆茆."
+msgid "NIS Server"
+msgstr "蓬躔珩弭玺掾 NIS"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "酗辄 镤玢 %s 磲 滹觊燔簌;"
+msgid "Port: %s"
+msgstr "三襻: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module options:"
-msgstr "硼殡镢蒡 狁桉狒矧:"
+msgid "Spain"
+msgstr "审疳磉"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"甜锺暹翦 酤襻 磲 濑箦翦 糸 疳襻燧赳秕 汩 麸 荞桉 %s.\n"
-"祥 疳褴戾赳镩 蓣秕 翮 祜聆 ``镬=糸燹 镬2=糸燹2 ...''.\n"
-"瞄 疳褴溴殂灬, ``io=0x300 irq=7''"
+msgid "This user name has already been added"
+msgstr "刘酎 麸 镬 黢摅翮 躔荞麇 掬"
-#: ../../modules/interactive.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"甜锺暹翦 酤襻 磲 濑箦翦 糸 疳襻燧赳秕 汩 麸 荞桉 %s.\n"
-"隅戾辋篝  贶桢 溟妪桴眢 瘃蒺彘 磲 彘筌沐翎 戾 麸 瘃屐 0x  "
-"'0x123'"
+msgid "Choose a file"
+msgstr "硼殡蓊翦 蓓 狁麇唢"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "(module %s)"
-msgstr "(荞桉 %s)"
+msgid "Apply"
+msgstr "碰狁祜戕"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "陪赆糗篝狍 镤玢稞 汩 %s 贶耵 %s"
+msgid "Auto-detect available ports"
+msgstr "拈徼蒹殪弪 椠皴 狨酎灬麸 屙麸痖箪稞"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "See hardware info"
-msgstr "旭镡镫 痣珩秭锺辋 蹼殛稞"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "曙轫 育礓弩 拈徜殛酏秕 狃屙羼泔痫殓燧礴"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "各弭 贶痫轱 瘃矬狁祜爿 %s;"
+msgid "San Marino"
+msgstr "躲轱 提襁盹"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "各弭 茈腼;"
+msgid "Belgium"
+msgstr "螺脬轱"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "埋蓁珀犴 %s %s 瘃矬狁祜沐唑"
+msgid "Kuwait"
+msgstr "曙踱蓍"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "配 祓锺暹翦 磲 聃桁唧弭 糸 疳襻燧赳秕 麸 狁桉狒矧."
+msgid "Choose the window manager to run:"
+msgstr "硼殡蓊翦 麸 溟狩彘耖篝 疳襻椠聩 痫 栎脲翦 磲 黢珞殪镳镩摅弭:"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated strings"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Sub"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "comma separated numbers"
-msgstr "狁殍祜 鼯耖箪蓓镩 戾 挈祆"
+msgid "First Time Wizard"
+msgstr "箱玢 旭珧 诛褴"
-#: ../../modules/parameters.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"旭镪朕桤赍 蓓 篥茈灬 痫 溴 钶聩 瘙 磲 麸 麇轳轶酤.\n"
+"吁礤鬟篝 戾 溟贽 筢 艴椠礴."
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d 狁殍祜 鼯耖箪蓓镩 戾 挈祆"
+msgid "please wait, parsing file: %s"
+msgstr "疳襻赆膻 疱耖燧礤翦, 屦孱羼汜筮 狁麇唢: %s"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "a number"
-msgstr "蓓狎 狁殍禳"
+msgid "Taiwan"
+msgstr "葬茼"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "Pakistan"
+msgstr "嗅觊篝茼"
-#: ../../network/adsl.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-" 痖 觑轫 赳矧 簖礓弩珧 adsl 暹磲 pppoe.\n"
-"像轶燧礤 篚礓蒹彘 黢珞殪镳镩稞 pptp, 贶痫殄 脒沐 dhcp.\n"
-"跑 溴 钶皴翦, 屦殡蓊翦 '黢摅 pppoe'"
-
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "育礓弩 篝 拈徜哧趱"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (戾 黢摅 麸 pppoa) usb"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr "http://www.lexmark. Linux 蛾躐."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Permissions"
+msgstr "拈赆辋灬翎"
-#: ../../network/adsl.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "use dhcp"
-msgstr "黢摅 dhcp"
+msgid "Provider name (ex provider.net)"
+msgstr "柬镬 疳耧鬏 (.. provider.net)"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "use pptp"
-msgstr "黢摅 pptp"
+msgid "Version: %s\n"
+msgstr "戈滹箸: %s\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "黢摅 pppoe"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"燥 簖篝珈 筢 溴 蓣彘 狁赍麸 瘘耧躜. 甜锺暹 磲 犴糸戾豉疬箦翦 "
+"瘃镡朕灬翎\n"
+"篝珥 邈赆糗篝狍 麸 Mandrake Linux. 跑 篚焘暹 狨酎, 祓锺暹翦 磲 滹觊燔箦翦 "
+"邈赆糗篝狍 赍殪蓓秕.\n"
+"嗅艮篝 F1 赆糗 翮 尻赀礴箸 狃 CDROM, 戾糗 泷茗翦 `text'."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Other ports"
-msgstr "峨脲 椠皴"
+msgid "Use the Windows partition for loopback"
+msgstr "遵摅 赆糗綮珞珧 Windows 汩 loopback"
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "茧弪 (鼯襁 麸喵矧 瘃矬翎筮狎)"
+msgid "Armenian (typewriter)"
+msgstr "榴戾黹挈 (泷狯镬琪犴)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"狞桤赍 荜躐 柁襻: %s.\n"
-"燥 簌篝 鲲耢 暹磲 \"椠襻/tcp\" \"椠襻/udp\", \n"
-"秕 柁襻 暹磲 暹磲 狁殍禳 戾翎铨 1 赆 65535."
+msgid "Connection type: "
+msgstr "札痫 簖礓弩珧: "
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"甜锺暹翦 磲 彘筌沐翦 溟荟锺弪 柁皴.\n"
-"搞牾襻 疳襻溴咩灬翎 暹磲: 139/tcp 139/udp.\n"
-"腻唪 麸 /etc/services 汩 痣珩秭锺咤."
+msgid "Graphical interface"
+msgstr "民狯殛 疱耖廛腚镯"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "酗殄 躔珩弩咤 栎脲翦 磲 屦轸褫痫眙衢 磲 篚礓蒿眙衢 篝 拈徜哧趱;"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s 戾 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"氧桁轶艮 drakfirewall\n"
-"\n"
-"洛忉轾桢唪  蓣弭 聃桁唧彘 麸 倪牯躏/旭忉箸 拈徜殛酏秕 戾 翮 黢摅 麸 "
-"drakconnect 瘃轫 瘃秣摅弭."
+msgid "India"
+msgstr "身溥"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"颀桁轶 tinyfirewall\n"
-"\n"
-"刘酎 聃桁哝彘 麸 瘃矬殛 筢 firewall 汩 狨酎 麸 扃鬈礴灬 Mandrake "
-"Linux.\n"
-"瞄 扉 轶黪褶 狯矬轾燧礴 臊箸 firewall, 疳襻赆膻 觑轸茴翦 篝珥\n"
-"彘溟赍蹯蓓 MandrakeSecurity Firewall 溟犴镬."
+msgid "Chad"
+msgstr "泽犴"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "溴 怦蓁珀 贶耵 溟牯"
+msgid "Slovakia"
+msgstr "与镡彡哚"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "蓬躔珩弭玺掾 POP 赆 IMAP"
+msgid "Singapore"
+msgstr "娱沣狃稞耒"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "蓬躔珩弭玺掾 葬黪漶镬暹秕"
+msgid "Cambodia"
+msgstr "梳祓骁"
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "蓬躔珩弭玺掾 柬镬 燥燧"
+msgid "Monitor HorizSync: %s\n"
+msgstr "吁黜玺 锺殒糸狎 犴犴甍箸: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Web Server"
-msgstr "蓬躔珩弭玺掾 审麸箦脒澌"
+msgid "Path"
+msgstr "容箸"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Host name"
-msgstr "柬镬 篚篝揿狒矧"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "拈牯踽挈 柬镬 Zeroconf"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
+"燥 簖篝珈 尻酏瘗箸 (%s) 溴 栳 铄觊碥 狨酎灬翎 赆糗 翮 尻赀礴箸 麸 "
+"扃麽磙灬麸騖n"
"\n"
+"震荞麇 痖栳睃翮翎 磲 蓣彘 狃屙羼泔痫殓桢 狨酎灬翮 尻赀礴箸 戾 翮 "
+"犭脶戕 箦 貘珉羼 屦唣邃 狍鲠脲哚, 屦彘滢 麸 簖篝珈 尻酏瘗箸 暹磲 蓓 "
+"屙 漉碥戾 箸戾唢 屦哞弩珧\n"
"\n"
-"\n"
-" 孱' 锺轶祜."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "妖桁轶 溟牯"
+"容脲翦 磲 钺磲屙羼泔痫殓桢 狨酎灬翮 尻赀礴箸 麸 篚篝揿狒矧 尻酏瘗箸;"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 痫獒 篚箨艴 溟牯 栎脲翦 磲 黢珞殪镳镩摅弭 汩 翮 "
-"簖礓弩 篝 拈徜哧趱"
+"抨趱瘗艮 %s\n"
+"蚤 栎脲翦 磲 犭胲铄翦 箦 狨酎 麸 尻趱瘗艮;"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose the network interface"
-msgstr "硼殡蓊翦 篚箨艴 溟牯"
+msgid "Add host"
+msgstr "旭矬柁赙 躔镫镢轶艮"
-#: ../../network/ethernet.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-"腻 怦蓁珀 瘃矬狁祜爿狎 溟牯 Ethernet 篝 簖篝珈 筢.\n"
-"腻 祓锺 磲 聃桁唧 狨麸 麸 酏痫 翮 簖礓弩."
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-"酗辄 疱胲翮 dhcp 栎脲翦 磲 黢珞殪镳镩摅弭;\n"
-" 瘃镥痖腼戕 暹磲 dhcp-client"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "腻 怦蓁珀 贶耵 ISDN. 嗅襻赆膻 屦殡蓊翦 扉 狃 翮 疳襻贶豉 镨."
+"容脲翦 磲 屦轸褫翦 篝秕 黢摅翦 磲 蓣秕 觑轫耒篝秕 赆翎朦泔躜;\n"
+"另 磲 酎翦 镩 黢摅翦 栳 祓锺稞 狃胲 磲 贶盹蹴 觌殛 篝 \"曙轫耒篝颸" "
+"篝镯 konqueror 赆 麸 nautilus.\n"
+"\n"
+"燥 \"旭矬狁祜箪蓓颸" 屦轸褫疱 翮 犴 黢摅翮 颀桁轶.\n"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-"彭酎痖筢 扉 ISDN 贶耵, 犭胲 溴 钶聩 麸 酏痫 翮. 嗅襻赆膻 屦殡蓊翦 扉 "
-"贶耵 PCI 狃 翮 疳襻贶豉 镨."
+"嗅襻赆膻 屦殡蓊翦 翮 鳇耵 狃镨揸艴箸 豉 屦殡镢掾 疳贻豉 篝 溟箨蒴.\n"
+" 祜聆镳镞珞 暹磲 咪獒 戾 糸 溟箨蒴弪 狨酎灬翮 邈赆糗篝狍珧."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "酗獒 狃 糸 疳襻贶豉 贶耵弪 ISDN 暹磲 溟觊 筢;"
+msgid "China (broadcast)"
+msgstr "蔬磲 (屙彷耖)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "氧桁唧彘 ISDN"
+msgid "Use quota for backup files."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Abort"
-msgstr "陵"
+msgid "Configuring printer \"%s\"..."
+msgstr "妖桁轶 尻趱瘗艮 \"%s\"..."
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Continue"
-msgstr "吁磔麇獒"
+msgid "Internet connection"
+msgstr "育礓弩 拈徜殛酏秕"
-#: ../../network/isdn.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"\n"
-"跑 蓣弭 ISA 贶耵, 镩 糸燧 篝珥 屦屙 镨 栳 瘃蒺彘 磲 暹磲 簌篝蒡.\n"
-"\n"
-"跑 蓣弭 PCMCIA 贶耵, 瘃蒺彘 磲 钶皴翦 麸 irq 赆 麸 io 翮 贶耵狎 筢.\n"
+" 鳇耵 麸 狁桉狒矧 %s 狃蒴貅.\n"
+"容脲翦 磲 滹觊燔箦翦 钺碥 戾 溟狯锺弭殛蒡 疳襻燧赳秕;"
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "I don't know"
-msgstr "腻 钶聩"
+msgid "Welcome to the Open Source world."
+msgstr "梳膻 锺唧狒 篝镯 挈箪 麸 另镩黥稞 漱溟赆"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Bosnia and Herzegovina"
+msgstr "嘛箜哚-篷驽泔膺礴"
-#: ../../network/isdn.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"遵彘苕弩翦 蓓 瘃徙灬糸挈 簖篝珈 狁麇啭 (ext2/ext3, reiserfs, xfs, or jfs) "
+"汩 狨酎 麸 箸戾唢 簖礓弩珧\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "蚤 暹滹躜 贶耵狎 蓣弭;"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "旭蒺彘 磲 锺唧翦 麸 溟牯踽挈 镬 翮 IP 溟妪桴眢.\n"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "埋蓁珀 扉 溟屦狯 \"%s\" 栎脲翦 磲 翮 黢珞殪镳镩摅弭 ;"
+msgid "Netherlands"
+msgstr "想脶礓哚"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "酗轱 瘃镫腼 栎脲翦 磲 黢珞殪镳镩摅弭;"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "琉矬麸朕 狁麇啭..."
#: ../../network/isdn.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "旭镫腼 躔镩痫 挈箪秕"
+msgid "Internal ISDN card"
+msgstr "朋羼殛 贶耵 ISDN"
-#: ../../network/isdn.pm:1
-#, c-format
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-"旭镫腼 躔镩痫 挈箪秕\n"
-" 鼯襁 D-Channel (扉箬蓓弪 泷犰燧)"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "European protocol"
-msgstr "捧聩疳 瘃镫腼"
+"腻 躔荞麇 沩酎 屙犭脶牯殛 镤玢 OSS/ALSA 汩 翮 贶耵 搠秕 筢 (%s)"
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "捧聩疳 旭镫腼 (EDSS1)"
+msgid "Title"
+msgstr "赃綦矧"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"硼殡蓊翦 麸 疳耧鬏 筢騖n"
-" 跑 溴 暹磲 篝镯 赆糗腼泔, 屦殡蓊翦 Unlisted"
+msgid "Install & convert Fonts"
+msgstr "陪赆糗篝狍 & 戾翎赳镳 民犰灬麸箦轳"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "External ISDN modem"
-msgstr "蓬羼殛 ISDN modem"
+msgid "WARNING"
+msgstr "醒嫌献"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "朋羼殛 贶耵 ISDN"
+msgid "Installing bootloader"
+msgstr "旭襻祆 尻赀礴箸"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "蚤 暹滹躜 暹磲 ISDN 簖礓弩 筢;"
+msgid "replay"
+msgstr "屦犴茈瑛"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "箱玢 妖桁轶珧 拈牯"
+msgid "detected %s"
+msgstr "犴轺礤珀 麸 %s"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "嗅腴 颀桁轶 (isdn4net)"
+msgid "Virgin Islands (U.S.)"
+msgstr "嗅耔蓓镩 娃箫(领羼殛犴殛蒡)"
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "洼 颀桁轶 (isdn-light)"
+msgid "Bad backup file"
+msgstr "梳翦篝襻祆蓓 弼邃耖挈 狁麇唢"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
"\n"
-"We recommand the light configuration.\n"
+"What would you like to do?"
msgstr ""
-"酗獒 ISDN 颀桁轶 瘃雉殪荇;\n"
-"\n"
-"* 疳腴 颀桁轶 黢珞殪镳镩暹 麸 isdn4net. 绣耖蓣彘 黢摅殪 羼汜脲哚,\n"
-" 犭胲 暹磲 脒泔 潺箨镫 汩 蓓犴 狁鬈耖 磲 聃桁轶翦 赆  篝羼妩趱痫.\n"
-"\n"
-"* 洼 颀桁轶 暹磲 艴觑朦翦耒 篝珥 赆翎睃珞, 疱耖篌羼 篝羼妩趱痃,\n"
-" 犭胲 戾 腴泓翦襻 羼汜脲哚.\n"
-"\n"
-"旭雉暹盹蹯 翮 咫狯耖 颀桁轶.\n"
+" 颀桁轶 翮 觑轫掾 黢摅珧 溟徜殛酏秕 蓣彘 掬 氵礤.\n"
+"胚磲 狃屙羼泔痫殓燧礴.\n"
"\n"
+"蚤 栎脲翦 磲 贶礤翦:"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "嚏 贶礤轵 暨痫翎"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "陪赆糗篝狍 rpm"
+msgid "Pipe into command"
+msgstr "拈狍揄 羼汜筮狎 箦 屙麸朕"
-#: ../../network/modem.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"怦蓁珀 蓓 \"%s\" winmodem, 栎脲翦 磲 邈赆翎篝摅弭 麸 狃狁徇翮麸 "
-"腼汩箪殛 ;"
+"疙 燧耧 麸 蹼殛稞 筢 黢彘苕弭衢 ``殇辄牯玺秕'' 镤玢稞 汩 磲 "
+"脲轸秕胥摅彘.\n"
+"甜锺暹翦 磲 怦暹翦 篦弭殛蒡 痣珩秭锺咤 篝: %s"
-#: ../../network/modem.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Title"
-msgstr "赃綦矧"
+msgid "Detecting devices..."
+msgstr "彭麸痖箪 篚箨艴..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
+msgstr "受眙 觌殛 邃 汩 磲 铄觊磙箦 镤玢 ->"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Haiti"
+msgstr "龙艮"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Description of the fields:\n"
+"\n"
msgstr ""
-"燥 禳眙屐 筢 溴 躔矬翮襁驽翎 狃 麸 簖篝珈.\n"
-"堰铘 扉 灬糸 篝 http://www.linmodems.org"
+"绣耖泷狯 豉 疱溥:\n"
+"\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "腻羼矧 孱躔珩弭玺掾 DNS (瘃镝轳弭殛)"
+msgid "the name of the CPU"
+msgstr "麸 镬 赆翎箨艴狍艮 麸 屦孱羼汜篝"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "旭矧 孱躔珩弭玺掾 DNS (瘃镝轳弭殛)"
+msgid "Refreshing printer data..."
+msgstr "另犴甍箸 溴滹燧睐 尻趱瘗艮..."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install2.pm:1
#, c-format
-msgid "Domain name"
-msgstr "柬镬 燥燧"
+msgid "You must also format %s"
+msgstr "旭蒺彘 屦唧珧 磲 祜聆镳镩摅弭 麸 %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Be careful: this operation is dangerous."
+msgstr "旭矬秣: 刘艮 溟徜殛狍哚 暹磲 屦殛唔漉礴."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Script-based"
-msgstr "遵摅 script"
+msgid "Insert a floppy containing package selection"
+msgstr "砰筌沐翦 溟箨蒴 痫 疱耖蓣彘 翮 屦殡镢 疳贻豉"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "遵摅 翦耢狒殛稞"
+msgid "Server: "
+msgstr "蓬躔珩弭玺掾:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Security Alerts:"
+msgstr "砰滹痫檗箦轵 馏鲠脲哚:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Login ID"
-msgstr "'柬镬 遵摅翮"
+msgid "Sweden"
+msgstr "语蹒溥"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "榴殍禳 翮脲鳋盹"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection name"
-msgstr "柬镬 簖礓弩珧"
+msgid "Poland"
+msgstr "酗膣磉"
-#: ../../network/modem.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "硼殡镢蒡 育礓弩珧"
+msgid "Importance: %s\n"
+msgstr "羽秕溽辄翮翎: %s\n"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "渝 痫獒 箦轳獒贽 瘘耵 暹磲 篚礓邃屐蓓 麸 禳眙屐 筢;"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "氧桁唧彘 溟牯"
+msgid "Other ports"
+msgstr "峨脲 椠皴"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-"旭镡朕灬翎 赆糗 翮 颀桁轶.\n"
-"娘觊燔篝 翮 簖礓弩 戾 麸 net_monitor 麸 mcc. 另 溴 脲轸秕胥摅彘 "
-"簖礓弩, 酎翦 栳 瘃蒺彘 磲 尻觊磙箦翦 钺碥 翮 颀桁轶."
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"瘤稞 氵礤 狨酎, 瘃雉暹盹蹯 磲 屦犴尻觊磙箦翦 麸 疱耖廛腚镯 汩 磲 "
-"狃秭弭 翎 瘃镡朕灬翎 犭脶戕 溟牯踽觑 镯狒矧."
+msgid "SMBus controllers"
+msgstr "烹邈牯蒡 SMBus"
-#: ../../network/netconnect.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"吁泖狁玺揆獒, 颀桁轶 溟牯 赆 溟徜殛酏秕 翦脲啭箦.\n"
-"祥 聃桁唧彘 栳 弼狁祜篝稞 酤襻 篝 簖篝珈 筢.\n"
-"\n"
+msgid "Connection timeout (in sec)"
+msgstr "遵矧 尻酎 簖礓弩珧 (箦 溴羼)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"疙 瘃腌灬 屐鲠磉篝珀 赆糗 翮 屦犴尻赀礴箸 麸 溟牯: \n"
-"\n"
-"%s"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "燥 溥牯躏 瘃蒺彘 磲 屦犴尻觊礴桢, 容脲翦 磲 麸 屦犴尻觊磙箦翦 ;"
+msgid "Croatian"
+msgstr "蜀镝糸挈"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "氧桁唧彘 溟牯"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "遵摅 躔狁黠躞 赆翎綮摅妁"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "龄蹴犰哚 fork: %s"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "容脲翦 磲 篚礓蒎篝 赆糗 翮 尻赀礴箸;"
+msgid "/Help/_About..."
+msgstr "/嘛掼彘/_喻弭殛 戾..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet connection"
-msgstr "育礓弩 拈徜殛酏秕"
+msgid "Remove user directories before restore."
+msgstr "瘤徇皴箸 赆翎朦泫 黢珞酤 瘃轫 狃 翮 屦犴狯锺."
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"各弭 聃桁唧彘 痫腚稞 赳秕 汩 磲 篚礓蒎篝 篝 拈徜哧趱.\n"
-"硼殡蓊翦 狨酎 痫 栎脲翦 磲 黢珞殪镳镩摅弭.\n"
-"\n"
+"柔 聃桁唧弭 蓓犴 狃镬彡聃箪蓓 尻趱瘗艮. 刘酎 狃衢翦 蓓 瘃矬廛箝祜 "
+"溥牯躏, 犭胲 麸 溥牯躏 溴 蓣彘 聃桁轶翦 彡. 另 篚礤鬟箦翦 鼯襁 磲 "
+"聃桁唧弭 麸 溥牯躏 溴 栳 祓锺蒹弭 磲 贶礤翦 黢摅 麸 尻趱瘗艮 痫 "
+"聃桁哝弭. 蚤 栎脲翦 磲 贶礤翦;"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "氧桁唧彘 觑轫掾 黢摅珧 尻趱瘗酤 CUPS"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "硼殡蓊翦 翮 簖礓弩 痫 栎脲翦 磲 聃桁唧弭"
+msgid "could not find any font in your mounted partitions"
+msgstr "溴 怦蓁珀犴 泷犰灬麸箦轳蒡 篝轵 瘃矬狁翮燧礤 赆翎綮摅彘"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "犴轺礤珀犴 贶耵(弪) ethernet"
+msgid "F00f bug"
+msgstr "遇茈灬 F00f"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "育礓弩 LAN"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "犴轺礤珀 赆膣溟彡 簖礓弩"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"酗辄 疱胲翮 dhcp 栎脲翦 磲 黢珞殪镳镩摅弭;\n"
+" 瘃镥痖腼戕 暹磲 dhcp-client"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Cable connection"
-msgstr "梳膣溟彡 簖礓弩"
+msgid "Domain Name:"
+msgstr "柬镬 燥燧:"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "detected"
-msgstr "犴轺礤珀"
+msgid "On Floppy"
+msgstr "郁珥 拈箨蒴"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ADSL connection"
-msgstr "育礓弩 ADSL"
+msgid "Restore"
+msgstr "硼犴狯锺"
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "detected %s"
-msgstr "犴轺礤珀 麸 %s"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"犴 锺轶翦 磲, 蓦邈黠 豉 篚箨艴 溟牯 汩 徜檐犟轸 赆糗篝狍 "
+"脲轸秕胥哚."
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "育礓弩 ISDN"
+msgid "Looking for available packages..."
+msgstr "剀黜 汩 溟徼蒹殪 疳贻翎..."
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "育礓弩 Winmodem"
+msgid "Init Message"
+msgstr "剔眭灬 Init"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "犴轺礤珀 篝珥 瘘耵 %s"
+msgid "Rescue partition table"
+msgstr "羞磲赆 赆翎綮摅妁 溟荏珧"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Normal modem connection"
-msgstr "琉朕 簖礓弩 戾 禳眙屐"
+msgid "Connection complete."
+msgstr " 簖礓弩 葶轫."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "彭麸痖箪 篚箨艴..."
+msgid "Cyprus"
+msgstr "数瘃矧"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "瞄 旭秣珈蓓秕"
+msgid "Remove from RAID"
+msgstr "瘤徇皴箸 狃 麸 RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "遵摅 狨酎灬翮 犴喵礤躞珧"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"刘酎 犍溟挈 瘃忉箸 暹磲 痫臊 狃朦 (瘃蒺彘 磲 蓣彘 麸蹼荀轶麸 %d "
+"麽襻牯揆弪)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "硼殡蓊翦 麸 瘃秭唠 汩 颀桁轶"
+msgid "Configuration Wizards"
+msgstr "箱玢镞 妖桁轶珧"
#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"梳膻 揠栳翦 篝镯 箱玢 妖桁轶珧 拈牯鮘n"
-"\n"
-"胚灬篝 蒴镩祜 磲 聃桁唧秕戾 翮 簖礓弩 筢 篝 溟徜哧趱/溥牯躏.\n"
-"另 溴 栎脲翦 磲 黢珞殪镳镩摅弭 翮 狨酎灬翮 犴喵礤躞, 狃镥痖胼铘 麸 "
-"觑豸荜.\n"
+msgid "ISDN connection"
+msgstr "育礓弩 ISDN"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"硼彘滢 贶礤翦 扉 溟牯踽贽 邈赆糗篝狍, 麸 溥牯躏 暹磲 掬 聃桁轶燧盹.\n"
-"受眙 觌殛 篝 彭糗铄 汩 磲 溟狒珩摅弭 糸 聃桁唧彘 筢, 荜躐 汩 磲 "
-"钺磲聃桁唧弭 翮 簖礓弩 篝 拈徜哧趱.\n"
+msgid "primary"
+msgstr "瘃妪秕筢"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "篝镯 孱躔珩弭玺 SMB/Windows \"%s\", 觑轫耒篝 \"%s\""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We are now going to configure the %s connection.\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
"\n"
"\n"
-"Press OK to continue."
-msgstr ""
"\n"
"\n"
"\n"
-"轧襻 栳 聃桁唧秕戾 翮 %s 簖礓弩.\n"
"\n"
"\n"
-"嗅艮篝 麸 OK 汩 磲 铄觊磙箦翦"
+"\n"
+" 孱' 锺轶祜齖n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+"!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "轧襻 栳 聃桁唧秕戾 翮 %s 簖礓弩."
+msgid "Skip"
+msgstr "嗅褴脲轼"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "育礓弩 赆 颀桁轶 拈徜殛酏秕"
+msgid "Niue"
+msgstr "瓦秕"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "妖桁轶 翮 簖礓弩珧"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"彭羼泔痫殄/狃屙羼泔痫殄  翎 躔矬躞艮灬翎 溟牯 痫 蓣秕 \n"
+"聃桁轶翦 磲 铄觊盹 赆糗 翮 尻赀礴箸."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Disconnect"
-msgstr "琉矬溴箸"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Connect"
-msgstr "育礓弩"
+msgid "important"
+msgstr "箸灬眙殛"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Total Progress"
+msgstr "吁盹腴贽 旭滹"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"You can reconfigure your connection."
-msgstr ""
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"甜锺暹翦 磲 屦犴狁蹊爝箦翦 翮 簖礓弩 筢."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"You can connect to the Internet or reconfigure your connection."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"IDE\n"
+" PCI\n"
+"\n"
+"\n"
+"\n"
+" PCI 歪閈n"
+" 槛閈n"
+"\n"
+" 犴轺礤珀錦n"
+" 硼屙 硼屙颸n"
+"\n"
"\n"
-"甜锺暹翦 磲 篚礓彖暹翦 篝 拈徜哧趱 磲 屦犴狁蹊爝箦翦 翮 簖礓弩 筢."
+" PCI\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "刘艮 翮 篝殂燹 溴 暹篝 篚礓邃屐蓓镩 篝 拈徜哧趱."
+msgid "Users"
+msgstr "遵摅翦"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"甜锺暹翦 磲 狃矬蹴溴桢唪 磲 屦犴狁蹊爝箦翦 翮 簖礓弩 筢."
+msgid "Aruba"
+msgstr "榴稞祓"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "刘艮 翮 篝殂燹 暹篝 篚礓邃屐蓓镩 篝 拈徜哧趱."
+msgid "Preparing bootloader..."
+msgstr "旭镥麸殪狍哚 瘃镢褴祆狒矧 尻赀礴箸..."
#: ../../network/network.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "燥 URL 瘃蒺彘 磲 铄觊碥 戾 'http:' 'ftp:'"
+msgid "Gateway (e.g. %s)"
+msgstr "旋腌 (.. %s)"
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr " proxy 瘃蒺彘 磲 暹磲 http://..."
+msgid "The passwords do not match"
+msgstr "祥 犍溟觑 瘃忉箸 暹磲 犴镩镩"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Examples for correct IPs:\n"
+msgstr "嗅襻溴咩灬翎 簌篝 IP:\n"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "Frequency (MHz)"
+msgstr "吁黜玺 (MHz)"
-#: ../../network/network.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "氧桁唧彘 proxies"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"瞄 磲 黢珞殪镳镩摅弭 狨艮 翮 狃镨珀艴燧礴 屦殡镢 疳贻豉, 铄觊磙篝 翮 "
+"邈赆糗篝狍 戾 ``linux defcfg=floppy''"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr " IP 溟妪桴眢 翮 瘕腌 瘃蒺彘 磲 暹磲 翮 祜聆掾 1.2.3.4"
+msgid "the number of the processor"
+msgstr " 狁殍禳 麸 屦孱羼汜篝"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr " IP 溟妪桴眢 DNS 瘃蒺彘 磲 暹磲 翮 祜聆掾 1.2.3.4"
+msgid "Hardware clock set to GMT"
+msgstr "燥 耧朦 麸 躔镫镢轶艮 筢 暹磲 聃桁轶燧盹 箦 GMT ( 藐襁盹蹰趄)"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "吁箨艴 瘕腌"
+msgid "Give a file name"
+msgstr "宁篝 蓓 镬 狁麇唢"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "旋腌 (.. %s)"
+msgid "Please choose the port that your printer is connected to."
+msgstr "硼殡蓊翦 箦 痫哚 柁襻 暹磲 篚礓邃屐蓓矧 尻趱瘗艮 筢."
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "DNS server"
-msgstr "蓬躔珩弭玺掾 DNS"
+msgid "Change Cd-Rom"
+msgstr "岭脶戕 Cd-Rom"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"嗅襻赆膻 彘筌沐翦 麸 镬 麸 篚篝揿狒矧.\n"
-"燥 镬 狨酎 瘃蒺彘 磲 暹磲 蓓 痣揆弪 镬 篚篝揿狒矧,\n"
-" .. ``mybox.mylab.myco.com''.\n"
-"甜锺暹翦 屦唧珧 磲 彘筌沐翦 赆 翮 溟妪桴眢 IP 翮 瘕腌 溟牯"
+msgid "Paraguay"
+msgstr "嗅襻泔踯"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "There's no known driver for your sound card (%s)"
+msgstr "腻 躔荞麇 贶痫轱 沩酎 镤玢 汩 翮 贶耵 搠秕 筢 (%s)"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr " IP 溟妪桴眢 瘃蒺彘 磲 暹磲 箦 祜聆 1.2.3.4"
+msgid "force"
+msgstr "戾糗 膺狎"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "郁珥 尻赀礴箸 篚篝揿狒矧"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "旭蒺彘 磲 锺唧翦 麸 溟牯踽挈 镬 翮 IP 溟妪桴眢.\n"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "氧桁唧彘 溟牯"
+msgid "Exit"
+msgstr "割镤矧"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"另徭摁珞 翎豸玺狎 翮 贶耵狎 溟牯 (黢摅殪 汩 鲲耒麸 躔镫镢轶糨)"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "柬镬 篚篝揿狒矧"
+"隅.: 另茈镢 戾 麸 祜眙蓦 麸 尻趱瘗艮 赆 麸 簖篝珈 尻酏瘗箸 栳 "
+"邈赆翎篝徼暹 屦轲胼镯 燧黢 赆 %d MB 腼汩箪殛"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Netmask"
-msgstr "誊箨 溟牯"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
+msgstr ""
+"腻 蓣弭 贶痫獒 聃桁轶燧礴 溟屦狯.\n"
+"氧桁唧翦 翮 贶盹眙狎 觌殛 篝 '妖桁轶'"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "IP address"
-msgstr "拈妪桴眢 IP"
+msgid "Estonian"
+msgstr "朋栾黹挈"
-#: ../../network/network.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+" Apache 暹磲 蓓狎 孱躔珩弭玺掾 WWW. 甜锺暹 磲 孱躔珩弭摅彘 狁麇哚\n"
+"HTML 赆 CGI."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Automatic IP"
-msgstr "刘酎灬麸 IP"
+msgid "Add/Del Clients"
+msgstr "旭矬柁赙/瘤徇皴箸 绣脶酤"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid " (driver %s)"
-msgstr " (镤玢 %s)"
+msgid "Choose the network interface"
+msgstr "硼殡蓊翦 篚箨艴 溟牯"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "妖桁轶 篚箨艴掾 溟牯 %s"
+msgid "Unknown Model"
+msgstr "躲睐篝 田眙蓦"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"嗅襻赆膻 彘筌沐翦 糸 IP 聃桁唧彘 汩 狨酎 麸 簖篝珈.\n"
-"受桢 篝镩麇唢 瘃蒺彘 磲 彘筢麒暹  IP 溟妪桴眢 戾 狁殍祜\n"
-"鼯耖箪蓓秕 戾 翦脲咤 (疳褴溴殂灬: 1.2.3.4)."
+msgid "CD/DVD burners"
+msgstr "吁箨艴蒡 邈泷狯掾 CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"醒嫌献: 刘艮 篚箨艴 暹磲 掬 聃桁轶燧礴 汩 磲 篚礓蒎翎 戾 麸 "
-"拈徜哧趱.\n"
-"琉胲 疳艮篝 OK 汩 磲 犟狒摅弭 糸 躔荞黠躞弪 聃桁唧彘.\n"
-"岭胲骘眙狎 翎 疳襻贶豉 疱溥 栳 犭胲铄翦 翮 躔荞黠躞 颀桁轶."
+"梳糗綮珞 尻赀礴箸 孱 锺轶祜齖n"
+" (狃 MS-DOS,  狃 lilo)\n"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"旭矬秣! 另轺礤珀 扉 掬 躔荞黠躞 颀桁轶 燥喵秕 旭矬翎筮狎. 后 "
-"黢彘狍麸 锺轶燧礤 麇轳镪唔玺弪 聃桁唧彘 戾糗 翮 邈赆糗篝狍."
+msgid "choose image"
+msgstr "屦殡蓊翦 彘挈磲"
#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "另轺礤珀 颀桁轶 麸 燥喵秕 旭矬翎筮狎!"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Account Password"
-msgstr "戍溟挈 旭忉箸"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Account Login (user name)"
-msgstr "孙汜耖狍禳 育礓弩珧 (镬 黢摅翮)"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "遵矧 尻酎 簖礓弩珧 (箦 溴羼)"
+msgid "Connection name"
+msgstr "柬镬 簖礓弩珧"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Connection speed"
-msgstr "葬鼾翮翎 簖礓弩珧"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"篚眙弭徙燧礴 x 麸 痣衢筮秕 赍殪蓓秕\n"
+"箦 狁殍禳 麽襻牯揆"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "择矧 觌摅珧"
+msgid "Updating package selection"
+msgstr "另犴甍箸 屦殡邈燧睐 疳贻豉"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "硼殡蓊翦 齄襻"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "酗 栎脲翦 磲 篚礓蒹弭 麸 狁麇唢 loopback %s;"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "dns 2 嗅耧鬏 (瘃镝轳弭殛)"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+" 溟箨蒴 溏扉秕胥掼珀 戾 屦轸貅哚.\n"
+"甜锺暹翦 酤襻 磲 屦犴犭茆弭 翮 邈赆糗篝狍."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "dns 1 嗅耧鬏 (瘃镝轳弭殛)"
+msgid "the number of buttons the mouse has"
+msgstr " 狁殍禳 豉 痣揸赳 麸 痫眙殛轱"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider phone number"
-msgstr "榴殍禳 翮脲鳋盹 疳耧鬏"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "柬镬 疳耧鬏 (.. provider.net)"
+msgid "Replay"
+msgstr "硼犴狯豉箸"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your personal phone number"
-msgstr "旭矬殛 狁殍禳 翮脲鳋盹"
+msgid "Backup other files"
+msgstr "另暨泷狯 狍鲠脲哚 茈膣 狁麇啭"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 贶耵狎"
+msgid "No floppy drive available"
+msgstr "腻 躔荞麇 溟徼蒹殪矧 镤玢 溟箨蒴狎"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 贶耵狎"
+msgid "Backup files are corrupted"
+msgstr "葬 犴暨泷狯 狍鲠脲哚 暹磲 赆翦篝襻祆蓓"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Card IO"
-msgstr "IO 贶耵狎"
+msgid "TV norm:"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "DMA 贶耵狎"
+msgid "Cpuid family"
+msgstr "祥觑爿礤獒 Cpuid"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ 贶耵狎"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/tools.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "嗅襻赆膻 咫葶铘 篚祓腌颃篝 麸 疳襻贶豉 疱溥"
+msgid "Lithuanian AZERTY (new)"
+msgstr "碎栾踽黹挈 AZERTY (磔)"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Connection Configuration"
-msgstr "氧桁唧彘 簖礓弩珧"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/tools.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"燥 簖篝珈 鲠唔弭衢 磲 扃 暹磲 篚礓屐蓓 篝 拈徜哧趱颸n"
-"旭矬疳柁篝 磲 钺磲聃桁唧弭 翮 簖礓弩 筢."
+"\n"
+" 槛閈n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "瞄 朦泔躜 狍鲠脲哚, 栳 狃矬蹴溴桢唪 酤襻."
+msgid "Previous"
+msgstr "旭镧泔屙"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "燥 簖篝珈 暹磲 酤襻 篚礓屐蓓 篝 拈徜哧趱."
+msgid "Other OS (MacOS...)"
+msgstr "峨腼 脲轸秕胥殛 (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "娘觊燹 簖礓弩珧... "
+msgid "To activate the mouse,"
+msgstr "瞄 屙羼泔痫哏箸 痫眙殛轱"
-#: ../../network/tools.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "容脲翦 磲 滹觊燔箦翦 磲 篚礓彖暹翦 篝 拈徜哧趱 酤襻;"
+msgid "Bringing up the network"
+msgstr "抨赀礴箸 溟牯"
-#: ../../network/tools.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "氧桁唧彘 拈徜殛酏秕"
+msgid "Screenshots will be available after install in %s"
+msgstr "葬 篝殂扉躔 栳 暹磲 溟徼蒹殪 戾糗 翮 邈赆糗篝狍珧 篝 %s"
-#: ../../partition_table/raw.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"受糸 赆挈 篚焘徇礤 篝 溥箨 筢. \n"
-"疙 翦篝 咫葶黠 翮 彡羼衢玺狎 豉 溴滹燧睐 狃蒴貅. \n"
-"刘酎 箸灬唔彘 瘗 镳镩徜摒雉 邈泷狯 篝 溥箨 栳 赆翎朕铄 筢 趱麽哚 "
-"箨秕疬溟."
+"绣耖篌羼弪 豉 爝 赆翎綮摅彘 Windows 怦蓁珀犴 篝镯 溥箨 筢. 嗅襻赆膻 \n"
+"屦殡蓊翦 痫獒 栎脲翦 磲 篚耨殛睨箦翦 汩 磲 邈赆翎篝摅弭 麸 Mandrake "
+"Linux.\n"
+"\n"
+"受桢 赆糗綮珞 犴狯蓠弭衢 : \"柬镬 Linux\", \"柬镬 Windows\"\n"
+"\"座耒糸挈翮翎\".\n"
+"\n"
+"燥 镬 Linux 箸灬唔彘 翎 孱掾: \"札痫 溥箨秕\",\"狁殍禳 溥箨秕\",\n"
+"\"狁殍禳 赆糗綮珞珧 汩 疳褴溴殂灬, \"hda1\").\n"
+"\n"
+" \"札痫 溥箨秕\" 暹磲 \"hd\" 遘 瘃彘翎 汩 溥箨 IDE 赆 \"sd\" \n"
+"汩 SCSI 溥箨.\n"
+"\n"
+" \" 狁殍禳 溥箨秕\"暹磲 疖眙 蓓 泷莒灬 戾糗 麸 \"hd\" \"sd\". 瞄醆n"
+"麸躜 IDE 溥箨秕: \n"
+"\n"
+" * \"a\" 暹磲 \"master 溥箨矧 篝镯 瘃 咫邈牯 IDE\",\n"
+"\n"
+" * \"b\" 暹磲 \"slave 溥箨矧 篝镯 瘃 咫邈牯 IDE\",\n"
+"\n"
+" * \"c\" 暹磲 \"master 溥箨矧 篝镯 溴羼 咫邈牯 IDE\",\n"
+"\n"
+" * \"d\" 暹磲 \"slave 溥箨矧 篝镯 溴羼 咫邈牯 IDE\".\n"
+"\n"
+"瞄 溥箨秕 SCSI, \"a\" 暹磲 瘃矧 溥箨矧, \"b\" 暹磲 溴羼矧 "
+"溥箨矧\n"
+" 觌...\n"
+"\n"
+"燥 \"柬镬 Windows\" 暹磲 麸 泷莒灬 翮 赆糗綮珞珧  鲠唔弭衢 狃 翎\n"
+"Windows ( 瘃矧 溥箨矧 赆糗綮珞 胼沐翎 \"C:\")."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (旭镥痖脲沆蓓矧)"
+msgid "Tanzania"
+msgstr "葬礞犴哚"
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "郁镯 孱躔珩弭玺 CUPS \"%s\""
+msgid "Computing FAT filesystem bounds"
+msgstr "震镫镢轶禳 FAT filesystem bounds"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote Printers"
-msgstr "琉镬彡聃箪蓓镩 尻趱瘗糨"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"- 戌爿 另糸泷荟 馏鲠脲哚:\n"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Content of the file"
+msgstr "绣耖鬻屙 麸 狁麇唢"
-#: ../../printer/cups.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(箦 狨酎 麸 扃鬈礴灬)"
+msgid "Authentication LDAP"
+msgstr "虚篝镳镞珞 LDAP"
-#: ../../printer/cups.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(篝镯 %s)"
+msgid "Let me pick any driver"
+msgstr "柔 溟犭蓊 邈 镤玢"
-#: ../../printer/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "Profile "
+msgstr "旭秭唠 "
-#: ../../printer/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "transmitted"
+msgstr "狃弩翎腱蓓"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "造揿 Splash"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/data.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Here is the full list of keyboards available"
+msgstr "刘艮 暹磲 痣揆珧 脒篝 豉 溟徼蒹殪 痣珀赳镫镢啭"
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Theme name"
+msgstr "柬镬 栎灬麸"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Unknown Model"
-msgstr "躲睐篝 田眙蓦"
+msgid "/_Help"
+msgstr "/_嘛掼彘"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Unknown model"
-msgstr "躲睐篝 祜眙蓦"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"配 祓锺暹翦 磲 屦殡蓊弭 犴 镩 篚礓屐蓓镩 筢聩糨 狨麸 麸 扃麽磙灬麸 栳 "
+"暹磲 瘃矬廛箝祜 狃 狃镬彡聃箪蓓 扃麽磙灬翎 赆 狃 痫獒."
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (三襻 %s)"
+msgid "the width of the progress bar"
+msgstr "麸 痣荇矧 翮 泷犰燹 瘃稂滹"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "柬镬 篚篝揿狒矧"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cook Islands"
+msgstr "娃箫 曙蹶"
-#: ../../printer/main.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Network %s"
-msgstr "倪牯躏 %s"
+msgid "Formatting partition %s"
+msgstr "田聆镳镞珞 赆糗綮珞珧 %s"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "拈屦狯 \"%s\""
+msgid "Hostname required"
+msgstr "狃衢翦唪衢 麸 溟牯踽挈 镬"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local network(s)"
-msgstr "燥痖挈 倪牯躏()"
+msgid "Unselect fonts installed"
+msgstr "祥 狃镥痖脲沆蓓弪 泷犰灬麸箦轳蒡 邈赆翎篝荑珀犴"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "陵狒蓠汜篝矧 尻趱瘗艮 (座襁 镤玢)"
+msgid "Cancel"
+msgstr "蛾躐"
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", using command %s"
-msgstr ", 戾 翮 屙麸朕 %s"
+msgid "Searching for configured scanners ..."
+msgstr "眠礤翎 犴徭摁珞 汩 聃桁轶燧盹躜 筢聩糨 ..."
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "篝镯 孱躔珩弭玺 Novell \"%s\", 篝镯 尻趱瘗艮 \"%s\""
+msgid "Wheel"
+msgstr "体 耧滠觊"
-#: ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "篝镯 孱躔珩弭玺 SMB/Windows \"%s\", 觑轫耒篝 \"%s\""
+msgid "Videocard"
+msgstr "受耵 镨珧"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", 椠襻 %s"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\t另暨泷狯 馏鲠脲哚  tar 赆 bzip2\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "篝镯 孱躔珩弭玺 LPD \"%s\", 篝镯 尻趱瘗艮 \"%s\""
+msgid "Remove Selected"
+msgstr "瘤徇皴箸 硼殡邈燧睐"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", printing to %s"
-msgstr ", 尻酏瘗箸 篝 %s"
+msgid "/Autodetect _modems"
+msgstr "/彭麸痖箪 _禳眙屐"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", 痫膈黢珞糸贽 篚箨艴"
+msgid "Remove printer"
+msgstr "瘤徇皴箸 尻趱瘗艮"
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", 痫膈黢珞糸贽 篚箨艴 篝 HP JetDirect"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"醒嫌献!\n"
+"\n"
+"燥 DrakX 瘃蒺彘 酤襻 磲 犭胲铄 麸 燧沐栾 翮 赆糗綮珞珧 豉 Windows.\n"
+" 溟徜殛狍哚 狨艮 屐疱耖蓣彘 觊礓秕. 跑 溴 麸 蓣弭 贶礤 掬,\n"
+"忏暹翦 狃 翮 邈赆糗篝狍 咫葶铄翦 翮 赆糗綮珞 戾 麸 \n"
+"scandisk 燧筢 狃 翎 Windows 赆 赆糗 疱襁痿 翮 狃镪狒彡羼燔糸箸 \n"
+"(defragment). 体糗 铄觊磙篝 钺碥 翮 邈赆糗篝狍.\n"
+"体糗 栳 瘃蒺彘 磲 犟狒摅弭 犴暨泷狯 狍鲠脲哚 豉 溴滹燧睐 筢.\n"
+"跑 暹篝 筮泔躐镩, 疳艮篝 彭糗铄."
-#: ../../printer/main.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", 痫膈黢珞糸贽 篚箨艴 篝珥 USB"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "酗殄 躔珩弩咤 栎脲翦 磲 屦轸褫痫眙衢 磲 篚礓蒿眙衢 篝 拈徜哧趱;"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", 痫膈黢珞糸贽 篚箨艴 篝珥 疳褴腚珉 柁襻 \\#%s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"梳膻 锺唧狒 篝 羼汜脲唢 颀桁轶珧 翎黪漶镬暹秕.\n"
+"\n"
+"配, 栳 祓锺蒹弭 磲 聃桁唧弭 麸 簖篝珈 彘滹痫哏箸騖n"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ", USB printer"
-msgstr ", 尻趱瘗艮 USB"
+msgid "Other"
+msgstr "峨腼"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", 尻趱瘗艮 USB \\#%s"
+msgid "Default"
+msgstr "旭镥痖脲沆蓓"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " 篝 疳褴腚珉 柁襻 \\#%s"
+msgid "Button 2 Emulation"
+msgstr "旭矬镬镞 2 曙蹯痖"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Local Printers"
-msgstr "燥痖觑 尻趱瘗糨"
+msgid "type1inst building"
+msgstr "溏扉秕胥哚 type1inst"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "拈狍揄 羼汜筮狎 箦 屙麸朕"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "砰筌沐翦 篚箨艴 尻趱瘗艮 URI"
+msgid "choose image file"
+msgstr "硼殡蓊翦 扉 彘挈磲"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "抨趱瘗艮 箦 孱躔珩弭玺 NetWare"
+msgid "X server"
+msgstr "孱躔珩弭玺掾 X"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "抨趱瘗艮 箦 孱躔珩弭玺 SMB/Windows 95/98/NT"
+msgid "Domain Admin User Name"
+msgstr "柬镬 遵摅翮 拈狩彘耖篝 燥燧"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "抨趱瘗艮 溟牯 (TCP/Socket)"
+msgid "There was an error while scanning for TV channels"
+msgstr "旭镪朕桤赍 篥茈灬 赆糗 翮 犴徭摁珞 篝徼忐 翮脲狍珧"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "琉镬彡聃箪蓓矧 尻趱瘗艮 箦 孱躔珩弭玺 lpd"
+msgid "US keyboard (international)"
+msgstr "US 溟彖磔"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "琉镬彡聃箪蓓矧 尻趱瘗艮 箦 孱躔珩弭玺 CUPS"
+msgid "Not installed"
+msgstr "嚏 邈赆翦篝珈蓓"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "琉镬彡聃箪蓓矧 尻趱瘗艮"
+msgid "LAN connection"
+msgstr "育礓弩 LAN"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Local printer"
-msgstr "燥痖挈 尻趱瘗艮"
+msgid "/File/-"
+msgstr "/榴麇唢/-"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "妖桁轶 弼狁祜泾..."
+msgid "Italian"
+msgstr "婶犭殛"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Basic"
+msgstr "箩箝贽"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "眠礤翎 狯徇皴箸 麸 尻趱瘗艮 \"%s\"..."
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "胚篝 廨忉轱 汩 翮 狯徇皴箸 麸 尻趱瘗艮 \"%s\";"
+msgid "Honduras"
+msgstr "享滹"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "瘤徇皴箸 尻趱瘗艮"
+msgid "pdq"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "誊桢翦 瘗 磲 麇轳轶桢唪 狨酎 麸 尻趱瘗艮"
+msgid "Card IO"
+msgstr "IO 贶耵狎"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Print test pages"
-msgstr "抨酏瘗箸 滹觊灬篝殛 箦脒澌"
+msgid "when checked, owner and group won't be changed"
+msgstr "犴 屦殡邈暹, 殇轱牯摁珧 赆 镬茕 溴 栳 犭胲铒蹴"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-"琉蒴貅 狯徇皴箸 麸 尻趱瘗艮 \"%s\" 狃 麸 Star Office/OpenOffice.org/GIMP"
+"\n"
+"刘艮 暹磲 彘溟贽 Bootstrap\n"
+"赆糗綮珞 汩醆n"
+"dual-booting 麸 簖篝珈 筢.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-" 尻趱瘗艮 \"%s\" 狯衢褫桤赍 戾 屦轸貅哚 狃 麸 Star Office/OpenOffice.org/"
-"GIMP"
+"嗅襻赆膻 赆栾襁篝 遘 汩 贶桢 廪灬 栳 氵礤 屦犴茈瑛 翮 邈赆糗篝狍珧, "
+"遘 氵礤 麇轳镪唔玺"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "眠礤翎 狯徇皴箸 麸 尻趱瘗艮 狃 麸 Star Office/OpenOffice.org/GIMP"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"硼唧珧 邃 祓锺暹翦 磲 锺唧弭 犴 筢聩糨 痫 怦唧觑眙衢 箦 狃镬彡聃箪蓓 "
+"扃麽磙灬翎 栳 暹磲 溟徼蒹殪 箦 狨酎 麸 扃鬈礴灬."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "瘤徇皴箸 狨麸 麸 尻趱瘗艮 狃 麸 Star Office/OpenOffice.org/GIMP"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-倪牯躏 燧簌 FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"琉蒴貅 瘃矬柁赙 麸 尻趱瘗艮 \"%s\" 篝 Star Office/OpenOffice.org/GIMP"
+msgid "Russian (Yawerty)"
+msgstr "样箝挈 (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-" 尻趱瘗艮 \"%s\" 瘃矬糨桤赍 戾 屦轸貅哚 篝 Star Office/OpenOffice.org/GIMP"
+msgid "You must enter a device or file name!"
+msgstr "旭蒺彘 磲 锺唧弭 扉 篚箨艴 蓓 镬 狁麇唢!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "眠礤翎 瘃矬柁赙 麸 尻趱瘗艮 篝 Star Office/OpenOffice.org/GIMP"
+msgid "/_Quit"
+msgstr "/_割镤矧"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "旭矬柁赙 狨麸 麸 尻趱瘗艮 篝 Star Office/OpenOffice.org/GIMP"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr " 尻趱瘗艮 \"%s\" 暹磲 痣蒿 瘃镥痖脲沆蓓矧 尻趱瘗艮."
+msgid "Graphics memory: %s kB\n"
+msgstr "添揿 贶耵狎 泷狯殛: %s kB\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Default printer"
-msgstr "旭镥痖脲沆蓓矧 尻趱瘗艮"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"\n"
+" 缅黹贶 朵彘醆n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 缅黹贶 朵彘醆n"
+"\n"
+" 腌鲨蓓翎 缅黹贶 朵彘醆n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "像轶禳 狨麸 麸 尻趱瘗艮  瘃镥痖脲沆蓓秕"
+msgid "access to compilation tools"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer options"
-msgstr "硼殡镢蒡 尻趱瘗艮"
+msgid "Please select data to restore..."
+msgstr "嗅襻赆膻 屦殡蓊翦 翎 溴滹燧磲 瘃矧 屦犴狯锺..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "梳翎箨艴狍艮 尻趱瘗艮, 祜眙蓦"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"跑 箨镳妪弭 磲 黢珞殪镳镩摅弭 麸 aboot, 瘃矬蓊翦 磲 狯摅弭 咫妪桢耧 齄耧 "
+"(2048 麸戾唑 暹磲 狁赍麸)\n"
+"篝珥 狁鬓 麸 溥箨秕"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "梳翎箨艴狍艮 尻趱瘗艮, 祜眙蓦, 镤玢"
+msgid "Standard test page"
+msgstr "怎痖贽 滹觊灬篝殛 箦脒溽"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "瘤徇皴箸 疳脶轱 尻趱瘗艮 \"%s\"..."
+msgid "Create"
+msgstr "溺扉秕胥哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "柬镬 尻趱瘗艮, 疱耖泷狯, 栎箸"
+msgid "What"
+msgstr "蚤"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "札痫 簖礓弩 尻趱瘗艮"
+msgid "There was an error ordering packages:"
+msgstr "旭镪朕桤赍 篥茈灬 赆糗 翮 翎铋睃扃箸 豉 疳贻豉:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "陵狒蓠汜篝矧 尻趱瘗艮"
+msgid "Bulgarian (BDS)"
+msgstr "嘛蹼汜耖挈 (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Do it!"
-msgstr "梳' 麸!"
+msgid "Disable Server"
+msgstr "琉屙羼泔痫哏箸 蓬躔珩弭玺"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Close"
-msgstr "孰暹箝祜"
+msgid "Filesystem encryption key"
+msgstr "孰彘溥 犟躔麸泷荟珞珧 篚篝揿狒矧 狁麇啭"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "Gujarati"
+msgstr "藐秕翩狁狒殛"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"抨趱瘗艮 %s\n"
-"蚤 栎脲翦 磲 犭胲铄翦 箦 狨酎 麸 尻趱瘗艮;"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "岭脶戕 聃桁唧妁 尻趱瘗艮"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "旭矬柁赙 磔秕 尻趱瘗艮"
+"屦孱羼汜筮醆n"
+"\n"
+" "
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Normal Mode"
-msgstr "梳盹黹贽 梳糗篝狍"
+msgid "Save theme"
+msgstr "A痫柁赍躞 栎灬麸"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Change the printing system"
-msgstr "岭脶戕 篚篝揿狒矧 尻酏瘗箸"
+msgid "group"
+msgstr "o燔溽"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "妖桁轶 CUPS"
+msgid "Brazil"
+msgstr "埋徭殡哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"另犴甍箸 脒篝狎 尻趱瘗酤 ( 汩 磲 屐鲠磉箦 秕 麸躜 溟徼蒹殪秕 "
-"狃镬彡聃箪蓓秕 尻趱瘗糨)"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-"另犴甍箸 脒篝狎 尻趱瘗酤 ( 汩 磲 屐鲠磉箦 秕 麸躜 溟徼蒹殪秕 "
-"狃镬彡聃箪蓓秕 尻趱瘗糨)"
+msgid "Auto Install"
+msgstr "刘酎灬翮 邈赆糗篝狍"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"O 疳襻贶豉 尻趱瘗糨 蓣秕 聃桁轶翦. 受眙 溟痣 觌殛 箦 蓓犴 尻趱瘗艮 汩 "
-"磲 犭胲铄翦 糸 聃桁唧彘 麸, 磲 麸 锺唧弭  瘃镥痖脲沆蓓 汩 磲 "
-"瘃镡茈弭 痣珩秭锺咤 汩 狨酎."
+msgid "Network Configuration Wizard"
+msgstr "箱玢 妖桁轶珧 拈牯"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "育篝珈 尻酏瘗箸: "
+msgid "Removable media automounting"
+msgstr "刘酎灬翮 簖礓弩 狃矬瘙戾睐 祜碥澌"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "'鸽邈黠 邈赆翦篝珈蓓 瘃镢襻祆荇..."
+msgid "Printing"
+msgstr "抨酏瘗箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "陪赆糗篝狍 Foomatic..."
+msgid "Unkown driver"
+msgstr "躲睐篝矧 镤玢"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "琉蒴貅 颀桁轶 麸 尻趱瘗艮 \"%s\"!"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "腻 怦蓁珀犴 尻趱瘗糨 痫 磲 暹磲 篚礓屐蓓镩 篝镯 躔镫镢轶艮 筢"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "妖桁轶 尻趱瘗艮 \"%s\"..."
+msgid "Create a new partition"
+msgstr "溺扉秕胥哚 磔狎 赆糗綮珞珧"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "另茔睐箸 溴滹燧睐 尻趱瘗艮..."
+msgid "Driver:"
+msgstr "箱玢:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "酗轱 簖篝珈 尻酏瘗箸 栎脲翦 磲 黢珞殪镳镩摅弭;"
+msgid "unknown"
+msgstr "躲睐篝"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "硼殡镢 Spooler 抨趱瘗艮"
+msgid "Use fdisk"
+msgstr "遵摅 fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "像轶禳 旭镥痖脲沆蓓秕 抨趱瘗艮..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "噬颓釉 韵 严牧噬!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Installing %s ..."
-msgstr "陪赆糗篝狍 %s ..."
+msgid "sent: "
+msgstr "狃矬麸朕: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "瘤衢皴唪衢 %s..."
+msgid "Automatic IP"
+msgstr "刘酎灬麸 IP"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"The \"%s\" button shows two more buttons to:\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"燥 簖篝珈 尻酏瘗箸 (%s) 溴 栳 铄觊碥 狨酎灬翎 赆糗 翮 尻赀礴箸 麸 "
-"扃麽磙灬麸騖n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
"\n"
-"震荞麇 痖栳睃翮翎 磲 蓣彘 狃屙羼泔痫殓桢 狨酎灬翮 尻赀礴箸 戾 翮 "
-"犭脶戕 箦 貘珉羼 屦唣邃 狍鲠脲哚, 屦彘滢 麸 簖篝珈 尻酏瘗箸 暹磲 蓓 "
-"屙 漉碥戾 箸戾唢 屦哞弩珧\n"
+" Note that two different options are available after clicking the button:\n"
"\n"
-"容脲翦 磲 钺磲屙羼泔痫殓桢 狨酎灬翮 尻赀礴箸 麸 篚篝揿狒矧 尻酏瘗箸;"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "抨赀礴箸 麸 篚篝揿狒矧 尻酏瘗箸 赆糗 翮 尻赀礴箸"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"旭彘翎 磲 邈赆翎篝摅弭 麸 簖篝珈 尻酏瘗箸 %s 箦 蓓 簖篝珈 痫 蓣彘 "
-"屦唣邃 狍鲠脲哚 %s\n"
+"Linux\n"
+" 硼屙颸n"
"\n"
-"刘酎 麸 簖篝珈 尻酏瘗箸 尻翦脲 蓓犴 溽哽镯 (溟羼汜筮 篝 鳇眙) 痫 "
-"疱耖燧礤 糸 羼汜筮弪 尻酏瘗箸 赆 糸 溟狩彘襁驽翎. 刘酎 溽哽镯狎 "
-"暹磲 屦唧珧 瘃矬廛箝祜 狃 蓓 狃镬彡聃箪蓓 扃鬈礴灬 狃 麸 溥牯躏 赆 "
-"屦唧珧 暹磲 蓓 屙 漉碥戾 箸戾唢 屦哞弩珧. 瞄 狨酎 蓓狎 疱耖锺轶燧盹 "
-"狁殍禳 溽殪 铄觊碥 孱 锺轶祜 箦 狨酎 麸 屦唣邃 狍鲠脲哚.\n"
"\n"
-"胚篝 廨忉轱  栎脲翦 磲 聃桁唧弭 翮 尻酏瘗箸 箦 狨酎 麸 扃鬈礴灬;"
+"\n"
+"\n"
+" 瞄 旭秣珈蓓秕騖n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 硼犴狯豉箸\n"
+"\n"
+"\n"
+" 刘酎灬麸\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 琉镨揸艴箸\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "陪赆糗篝狍 篚篝揿狒矧 尻酏瘗箸 篝 屦唣邃 狍鲕脲獒 %s"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "paranoid"
-msgstr "嗅襻盹"
+msgid "Configuration of a remote printer"
+msgstr "妖桁轶 狃镬彡聃箪蓓秕 尻趱瘗艮"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "high"
-msgstr "狰珉"
+msgid "Moldova"
+msgstr "田脘徕哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "硼犴尻赀礴箸 麸 篚篝揿狒矧 尻酏瘗箸..."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "妖桁轶 狃镬彡聃箪蓓秕 尻趱瘗艮"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "燥 URL 瘃蒺彘 磲 铄觊碥 戾 'http:' 'ftp:'"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Add a new rule at the end"
+msgstr "旭矬柁赙 磔秕 赆睃磲 篝 糨腼"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-" 瘃忉箸 溟牯 溴 尻翦脲唪 赆 溴 祓弩 磲 尻觊礴桢. 嗅襻赆膻 "
-"咫葶铘 翮 颀桁轶 麸 蹼殛稞 筢. 体糗 瘃矬疳柁篝 磲 聃桁唧弭 麸 "
-"狃镬彡聃箪蓓 尻趱瘗艮 筢."
+"硼唧珧 邃 祓锺暹翦 磲 锺唧弭 犴 镩 尻趱瘗糨 痫 怦唧觑眙衢 箦 "
+"狃镬彡聃箪蓓 扃麽磙灬翎 栳 暹磲 狨酎灬翎 溟徼蒹殪镩 赆 箦 狨酎 麸 "
+"扃鬈礴灬."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-" 颀桁轶 溟牯 痫 葶轫 赆糗 翮 溟荞赍獒 翮 邈赆糗篝狍珧 溴 摁犴 "
-"漉磲酎 磲 尻觊礴桢. 嗅襻赆膻 咫葶铘 遘 麸 溥牯躏 暹磲 瘃矬廛箝祜 戾糗 "
-"翮 尻赀礴箸 赆 溟锺棹篝 糸 聃桁唧彘 戾 翮 黢摅 麸 瘦眙耧 烹葶黠 "
-"翮 Mandrake, 篝 綮揿 \"倪牯躏 & 拈徜哧趱颸" / \"育礓弩鏫" 赆 戾糗 "
-"聃桁唧翦 麸 尻趱瘗艮 屦唧珧 戾 麸 瘦眙耧 烹葶黠 Mandrake 篝 綮揿 \"针殛"
-"\"/\"抨趱瘗艮騖""
+"甜锺暹翦 酤襻 磲 濑箦翦 糸 疳襻燧赳秕 汩 麸 荞桉 %s.\n"
+"祥 疳褴戾赳镩 蓣秕 翮 祜聆 ``镬=糸燹 镬2=糸燹2 ...''.\n"
+"瞄 疳褴溴殂灬, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "妖桁轶 溟牯 酤襻"
+msgid "Quit without writing the partition table?"
+msgstr "割镤矧 鼯襁 狃镨揸艴箸 麸 疬磲赆 赆翎綮摅妁;"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "吁磔鏖箸 鼯襁 翮 颀桁轶 麸 溟牯"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"柔 聃桁唧弭 蓓犴 狃镬彡聃箪蓓 尻趱瘗艮. 刘酎 狃衢翦 蓓 瘃矬廛箝祜 "
-"溥牯躏, 犭胲 麸 溥牯躏 溴 蓣彘 聃桁轶翦 彡. 另 篚礤鬟箦翦 鼯襁 磲 "
-"聃桁唧弭 麸 溥牯躏 溴 栳 祓锺蒹弭 磲 贶礤翦 黢摅 麸 尻趱瘗艮 痫 "
-"聃桁哝弭. 蚤 栎脲翦 磲 贶礤翦;"
+msgid "Installing packages..."
+msgstr "陪赆糗篝狍 疳贻豉..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network functionality not configured"
-msgstr " 脲轸秕胥殛玺 麸 溟牯 溴 聃桁唧翮赍"
+msgid "Dutch"
+msgstr "想脶礓殛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Starting network..."
-msgstr "抨赀礴箸 溟牯..."
+msgid "The following packages need to be installed:\n"
+msgstr "葬 疳襻贶豉 疳贻翎 瘃蒺彘 磲 邈赆翎篝徼稞:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "另犴甍箸 溴滹燧睐 尻趱瘗艮..."
+msgid "Angola"
+msgstr "零挈脶"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"'各弭 戾翎鲚皴 麸 瘃 瘃镥痖脲沆蓓 尻趱瘗艮 筢 (\"%s\"), 歪 暹磲 "
-"瘃镥痖脲沆蓓矧 尻趱瘗艮 赆 篝 磔 磔 簖篝珈 尻酏瘗箸 %s;"
+msgid "service setting"
+msgstr "氧桁唧彘 躔珩弩哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "体翎鲲褴 聃桁唧妁 尻趱瘗艮"
+msgid "Custom"
+msgstr "旭矬狁祜箪蓓"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "体翎鲚皴翎 %s..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "燥 狁麇唢 黢珞殪镳镩暹翎 掬 狃 茈腼 loopback, 屦殡蓊翦 蓓 茈腼"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "梳磔磲 镬 尻趱瘗艮"
+msgid "Read-only"
+msgstr "厅盹 汩 犴茔睐箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-" 尻趱瘗艮 \"%s\" 躔荞麇 掬,\n"
-"胚篝 廨忉轱 汩 翮 屦殛茈貘 豉 聃桁唧妁;"
+msgid "Latvia"
+msgstr "隋趑镯哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"燥 镬 麸 尻趱瘗艮 瘃蒺彘 磲 疱耖蓣彘 禳盹 泷莒灬翎, 狁殍祜 赆 麸 "
-"麽襻牯揆 underscore"
+msgid "No known driver"
+msgstr "梳磔磲 沩酎 镤玢"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Transfer"
-msgstr "体翎鲲褴"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"疙狎 尻趱瘗艮 戾 麸 镬 \"%s\" 躔荞麇 掬 篝 %s\n"
-"受眙 觌殛 篝 \"体翎鲲褴\" 汩 磲 麸 屦殛犭弭.\n"
-"硼唧珧 祓锺暹翦 磲 麸 濑箦翦 蓓 磔 镬 磲 麸 疳襻怆蔌弭 ."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "座襁 戾翎鲲褴 尻趱瘗酤"
+"另 溴 暹磲 狨酎 痫 栎脲翦 磲 聃桁唧弭, 彘筌沐翦 麸 镬 篚箨艴掾/镬 "
+"狁麇唢 篝 泷犰燹 彘筢泫戕"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
"\n"
-"硼殡蓊翦 麸躜 尻趱瘗糨 痫 栎脲翦 磲 戾翎鲚皴翦 赆 贶眙錦n"
-"觌殛 篝 \"体翎鲲褴\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"You can visit our hardware database at:\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"腻 怦蓁珀 篚箨艴 受耵狎 '棍秕 篝 扃鬈礴燔 筢. 嗅襻赆膻 忮忉轾桢唪  "
+" 躔矬翮耖纥戾礴 受耵 棍秕 筢 暹磲 簌篝 麸痫桢翮燧礴.\n"
"\n"
-"硼唧珧 尻趱瘗糨 痫 蓣秕 聃桁轶翦 戾 狁麇哚 PPD 痫 疳褫黠眙衢 狃 麸躜 "
-"赆翎箨艴狍糨 麸躜 戾 麸痖觑 镤玢稞 CUPS 溴 祓锺稞 磲 戾翎鲥耔稞."
+"\n"
+"甜锺暹翦 磲 屦轶赍鲷暹翦 翮 廛箸 溴滹燧睐 蹼殛稞 篝:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"硼唧珧 羼汜筮弪 痫 溴 溏扉秕胥掼珀犴 戾 狨酎 麸 瘃襻祆 麸 \"foomatic-"
-"configure\" 溴 祓锺稞 磲 戾翎鲥耔稞."
+msgid "Configure Local Area Network..."
+msgstr "妖桁轶 麸痖觑 溟牯..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "燥 LPD 赆 麸 LPRng 溴 躔矬翮襁骘蹴 尻趱瘗糨 IPP.\n"
+msgid "Launch the sound system on your machine"
+msgstr "抨赀礴箸 麸 篚篝揿狒矧 搠秕 篝 扃鬈礴燔 筢"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"燥 PDQ 躔矬翮襁驽 禳盹 麸痖觑 尻趱瘗糨, 琉镬彡聃箪蓓矧 尻趱瘗糨 LPD 赆 "
-"尻趱瘗糨 Sockete/TCP.\n"
+msgid "Preparing printer database..."
+msgstr "另茔睐箸 廛箸 溴滹燧睐 尻趱瘗酤..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
+msgid "Information"
+msgstr "须珩秭锺咤"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr "想镪腌颃桤赍 茧 孱' 锺轶祜齖n"
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "No network card"
+msgstr "溴 怦蓁珀 贶耵 溟牯"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-" 尻趱瘗艮 聃桁唧翮赍 狨酎灬翎 汩 瘃忉箸 篝轵 贶耵弪 狃镨揸艴箸 "
-"鳄麸泷狯辋 麸 狃 麸 躔镫镢轶艮 筢. 甜锺暹翦 磲 蓣弭 瘃忉箸 箦 狨糨 "
-"黢珞殪镳镩翎 麸 泷狯殛 瘃襻祆 \"MtoolsFM\" (体盹: \"碰狁祜爿騖" -> "
-"\"篷汜脲哚 榴麇啭韁" -> \"MTools File Manager\") 翮 屙麸朕 \"mtools"
-"\" (汩 疱耖篌羼弪 痣珩秭锺咤 痣珀赳镫镢摅翦 \"man mtools\" 篝 泷犰燹 "
-"屙麸膻). 柔 怦暹翦 糸 鳄麸泷狯咤 筢 篝镯 溥箨 \"p:\", 箦 溥箨秕 戾 "
-"翎 屦屙 泷莒灬翎 犴 蓣弭 疱耖篌羼秕 狃 蓓犴 尻趱瘗糨 HP 戾 贶耵弪 "
-"狃镨揸艴箸 鳄麸泷狯辋. 渝 狨艮 翮 疱襁痿, 篝 瘃襻祆 \"MtoolsFM\" "
-"祓锺暹翦 磲 屦殡蓊弭 戾翎铨 豉 溟徼蒹殪 泷犰燔豉 溥箨秕 戾 麸 疱溥 "
-"篝珥 茼 溴铋 泫磉 麸 赆翎朦泔 狁麇啭."
+msgid "Which filesystem do you want?"
+msgstr "酗轱 簖篝珈 狁麇啭 瘃雉殪荇;"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "择辋 痣揸赳"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "隋痿镬羼暹 痣珩秭锺咤"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "誊媵"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"Printer default settings\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"篚箨艴轡n"
+"抨趱瘗艮 孱' 锺轶祜齖n"
"\n"
-" 想镪腌颃桤赍 篚箨艴!"
+" 狰珉."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "抨酏瘗箸 滹觊灬篝殛 箦脒澌..."
+msgid "This floppy is not FAT formatted"
+msgstr "刘艮 溟箨蒴 溴 蓣彘 祜聆镳镞珞 FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Print option list"
-msgstr "抨酏瘗箸 脒篝 屦殡镢"
+msgid "Configuring network"
+msgstr "妖桁轶 溟牯"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "抨酏瘗箸 篝镯 尻趱瘗艮 \"%s\""
+msgid "Graphic Card"
+msgstr "受耵 民狯殛"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "抨酏瘗箸/旭忉箸 受耵狎 柱麸泷狯辋 篝 \"%s\""
+msgid "Resizing Windows partition"
+msgstr "眠礤翎 犭脶戕 糸 赆糗綮珞珧 豉 Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "抨酏瘗箸/榆聩箸 篝 \"%s\""
+msgid "Provider dns 1 (optional)"
+msgstr "dns 1 嗅耧鬏 (瘃镝轳弭殛)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "抨酏瘗箸/榆聩箸/受耵弪 柱麸泷狯辋 篝颸"%s\""
+msgid "Cameroon"
+msgstr "梳戾耧"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"瞄 磲 燔桢翦 疱耖篌羼 汩 糸 溟徼蒹殪弪 屙麸胼 汩 麸 赳蓣镯 尻趱瘗艮 "
-"溟徕荏翦 翮 脒篝 痫 鲠唔弭 疳襻贶豉 贶眙 觌殛 篝 \"抨酏瘗箸 脒篝狎 "
-"屦殡镢\"%s%s\n"
-"\n"
+"甜锺暹翦 酤襻 磲 赆翎綮摅弭 麸 溥箨 %s\n"
+"剪犴 翦脲辋箦翦, 扃 铄鬈箦翦 磲 狃镨珀妪箦翦 疳酤眙狎 `w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" 硼唧珧 镩 屙麸胼 \"%s\" 赆 \"%s\" 筢 屦轸褫痫蹴 磲 锺唧弭 糸 聃桁唧彘 "
-"屦殡镢 汩 扉 篚汴尻耖燧礴 羼汜筮 尻酏瘗箸. 琉胲 瘃矬栎篝 糸 "
-"屦殍蹯玺蒡 聃桁唧彘 狃 翮 泷犰燹 屙麸膻, .. \"%s <狁麇唢>\".\n"
+msgid "Close"
+msgstr "孰暹箝祜"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"\n"
-" 抨趱瘗艮"
+"\"襻\": 咫葶铘 翮 屦殡镢 齄襻. 另 溴 暹篝 箦 狨艮 翮 齄襻,\n"
+"贶眙 觌殛 篝 痣揸赳 赆 屦殡蓊翦 扉 茈腌."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "庆羼镫轱"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr "抨酏瘗箸"
+"Restore Selected\n"
+"Catalog Entry"
+msgstr "硼犴狯锺躙n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"瞄 磲 尻趱瘙箦翦 狃 翮 泷犰燹 屙麸膻 (疳褴桴耧 翦耢狒殛稞) 贶眙 黢摅 "
-"翮 屙麸朕 \"%s <狁麇唢>\" \"%s<狁麇唢>\".\n"
+"瞄 磲 黢珞殪镳镩摅弭 蓓犴 狃镬彡聃箪蓓 尻酏瘗箸 瘃蒺彘 磲 濑箦翦 麸 "
+"溟牯踽挈 镬 麸 孱躔珩弭玺 尻趱瘙箦, 赆棹 赆 麸 镬 麸 尻趱瘗艮 "
+"箦 狨酎 麸 孱躔珩弭玺."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "Iceland"
+msgstr "审脶礓哚"
+
+#: ../../common.pm:1
+#, c-format
+msgid "consolehelper missing"
+msgstr "麸 consolehelper 脲唣彘"
+
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr "溴 尻翦脲唪衢"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"瞄 扉 脒篝 戾 糸 溟徼蒹殪弪 屙麸胼 汩 麸 赳蓣镯 尻趱瘗艮 贶眙 觌殛 "
-"篝 痣揸赳 \"抨酏瘗箸 脒篝狎 屙麸膻韁"."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "另莛趱铉 漭眙耧"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"\n"
-" 屙麸朕 \"%s\" 屦唧珧 筢 屦轸褫疱 磲 赳镳镳镩摅弭 糸 聃桁唧彘 屦殡镢 "
-"汩 扉 篚汴尻耖燧礴 羼汜筮 尻酏瘗箸. 琉胲 瘃矬栎箦翦 糸 屦殍蹯玺蒡 "
-"聃桁唧彘 篝珥 泷犰燹 屙麸膻, .. \"%s<狁麇唢>\"."
+"\n"
+"\n"
+"\n"
+" 磔."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"瞄 磲 尻趱瘙箦翦 狃 翮 泷犰燹 屙麸膻 (疳褴桴耧 翦耢狒殛稞) 贶眙 黢摅 "
-"翮 屙麸朕 \"%s <狁麇唢>\".\n"
+msgid "Expert Mode"
+msgstr "瞄 旭秣珈蓓秕"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printer options"
+msgstr "硼殡镢蒡 尻趱瘗艮"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Local Network adress"
+msgstr "燥痖贽 溟妪桴眢 溟牯"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "另暨泷狯 狍鲠脲哚 豉 狁麇啭 吁篝揿狒矧 (赆糗腼泔 /etc )"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"刘艮 暹磲 扉 脒篝 戾 糸 溟徼蒹殪弪 屦殡镢蒡 尻酏瘗箸 汩 麸 赳蓣镯 "
-"尻趱瘗艮:\n"
+"轧襻 蓣弭 翮 漉磲酎翮翎 磲 邈赆翎篝摅弭 疳贻翎 犴徕荑扉箸. 刘糗 翎\n"
+"疳贻翎 蓣秕 犴徕徼扉篝暹 戾糗 翮 蓐滹箸 翮 溟犴镬掾. 甜锺暹 磲 疱耖蓣秕韁n"
+"溟锺棹箦轵 篥犭燔豉 犴徕徼爝箦轵 狍鲕脲獒.\n"
+"\n"
+"瞄 磲 贶礤翦 朕 狨酤 豉 疳贻豉 瘃蒺彘 磲 蓣弭 扉 簖礓弩 篝 "
+"拈徜哧趱颸n"
+"痫 磲 脲轸秕胥暹.\n"
"\n"
+"容脲翦 磲 邈赆翎篝摅弭 糸 犴徕徼爝箦轵 ;"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"蚤 屙麸胼 狨糨 祓锺暹翦 屦唧珧 磲 糸 黢珞殪镳镩摅弭 篝 疱溥 \"彭麸朕 "
-"尻趱瘙箦\" 豉 溟犭 尻趱瘙箦 箦 痫腚蒡 弼狁祜爿, 犭胲 扃 疳褫麇翦 "
-"麸 镬 狁麇唢 邃 屦彘滢 麸 狁麇唢 瘃矧 尻酏瘗箸 麸 疳褫麇 弼狁祜戕.\n"
+msgid "Samba Server"
+msgstr "蓬躔珩弭玺掾 Samba"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-"瞄 磲 尻趱瘙箦翦 狃 翮 泷犰燹 屙麸膻 (疳褴桴耧 翦耢狒殛稞) 祓锺暹翦 磲 "
-"贶礤翦 黢摅 翮 屙麸朕 \"%s <狁麇唢>\" 祓锺暹翦 磲 贶礤翦 黢摅 泷狯殛稞 "
-"羼汜脲唢 尻酏瘗箸: \"xpp <狁麇唢>\" \" kprinter <狁麇唢>\". 燥 泷狯殛 "
-"羼汜脲唢 筢 屦轸褫疱 磲 犭胲铄翦 妪觑脶 糸 聃桁唧彘 屦殡镢.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Did it work properly?"
-msgstr "隋轸稞胥珞 簌篝;"
+msgid "Australian Optus cable TV"
+msgstr "梳膣溟彡 翮脲狍 Optus 翮 刘篝襻脒狎"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"踢 疱耖篌羼弪 滹觊灬篝殛蒡 箦脒溴 篝茈桤赆 篝镯 尻趱瘗艮.\n"
-"甜锺暹 磲 疱褴箦 贶痫轱 黢矧 燧黢 尻酏瘗箸 磲 铄觊磙箦.\n"
+" <Tab>/<Alt-Tab> 岭脶戕 疱溥秕 | <Space> 屦殡镢 | <F12> 屦屙 镨"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
+msgid "Subnet:"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Zimbabwe"
+msgstr "崎祓莒痫蹂"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the host name or IP."
+msgstr "嗅襻赆膻 锺唧翦 麸 溟牯踽挈 镬 翮 IP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "When"
+msgstr "悬翦"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "腻羼矧 孱躔珩弭玺掾 DNS (瘃镝轳弭殛)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "珠黼犴溥"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"踢 疱耖篌羼弪 滹觊灬篝殛蒡 箦脒溴 篝茈桤赆 篝镯 尻趱瘗艮.\n"
-"甜锺暹 磲 疱褴箦 贶痫轱 黢矧 燧黢 尻酏瘗箸 磲 铄觊磙箦.\n"
-"梳糗篝狍 尻酏瘗箸:\n"
-"%s\n"
"\n"
+"\n"
+"\n"
+" 赆磔磲\n"
+"."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "座襁 尻酏瘗箸 滹觊灬篝殛掾 箦脒溽"
+msgid "Color depth: %s\n"
+msgstr "萝栾 黢狒矧: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "娘觊灬篝殛 箦脒溽 鳄麸泷狯哚"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "腻 祓锺暹翦 磲 狃镥痖胼铄翦 狨酎 麸 疳贻麸. 旭蒺彘 磲 犴徕徼扉篝暹"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "彭犭脶牯殛 滹觊灬篝殛 箦脒溽 (A4)"
+msgid "Loading from floppy"
+msgstr "诛耵弭衢 狃 溟箨蒴"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "彭犭脶牯殛 滹觊灬篝殛 箦脒溽 (Letter)"
+msgid ""
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
+msgstr ""
+"燥 Drakperm 黢珞殪镳镩暹翎 汩 磲 溴唪 翎 狁麇哚 痫 黢彘苕弩翦 汩 磲 "
+"鲷檐铄翦 溟赆辋灬翎, 殇轱牯摁弪 赆 镬茕弪 戾 麸 msec.\n"
+"硼唧珧 祓锺暹翦 磲 屦孱羼汜篝暹翦 麸躜 溟觑 筢 赆睃礤 痫 栳 "
+"犴糸赆翎篝摅秕 麸躜 瘃镥痖脲沆蓓秕 赆睃礤."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "怎痖贽 滹觊灬篝殛 箦脒溽"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Print"
-msgstr "抨酏瘗箸"
+msgid "Slovenia"
+msgstr "与镡屙哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No test pages"
-msgstr "座襁 滹觊灬篝殛蒡 箦脒溴"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"砰筌沐翦 黢摅翮\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr "PCI 篚箨艴 PCI"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "ProgressBar color selection"
+msgstr "硼殡镢 黢狒矧 泷犰燹 瘃稂滹"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 糸 滹觊灬篝殛蒡 箦脒溴 痫 栳 尻趱瘗栾.\n"
-"隅.: 滹觊灬篝殛 箦脒溽 鳄麸泷狯哚 祓锺暹 磲 溟狁贻箦 狁赍酎 黢 汩 "
-"磲 尻趱瘗桢 赆 箦 尻趱瘗糨 laser 戾 扉犟 祉揿 祓锺暹 赆 磲 扃 "
-"尻趱瘗桢. 郁轵 疱耖篌羼弪 疱耖痿彘 尻酏瘗箸 糸 趱痖贽 滹觊灬篝殛掾 "
-"箦脒溽 狁赍."
+"震荞黠蹴 镩 彡秕桢 屦殡镢蒡.\n"
+"甜锺暹翦 磲 瘃矬栎箦翦 觊 茈脲 磲 犭胲铄翦 糸 躔荞黠躞弪."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Test pages"
-msgstr "娘觊灬篝殛蒡 箦脒溴"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"容脲翦 磲 锺唧弭 狨酎 麸 尻趱瘗艮 (\"%s\")\n"
-"筢 麸 瘃镥痖脲沆蓓 尻趱瘗艮;"
+"抨翦脲 屙麸胼 瘃镢襻祆狒轶燧礤 狃 翮 屙麸朕 at 赆 漭箪弪 屙麸膻韁n"
+"犴 鳇耵矧 麸 篚篝揿狒矧 暹磲 狁赍糗 麽扃朦."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "硼殡镢 %s 尻酎 锺唢!"
+msgid "Radio support:"
+msgstr "震矬艮耖铉 襻溟秭秕:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr " 屦殡镢 %s 瘃蒺彘 磲 暹磲 狁殍禳!"
+msgid "Installing SANE packages..."
+msgstr "陪赆糗篝狍 疳贻麸 SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr " 屦殡镢 %s 瘃蒺彘 磲 暹磲 彡蓠衢矧 狁殍禳!"
+msgid "boot disk creation"
+msgstr "溏扉秕胥哚 溟箨蒴狎 尻赀礴箸"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "硼殡镢 祜眙蓦秕 尻趱瘗艮"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"抨趱瘗艮 孱' 锺轶祜齖n"
-"\n"
-" 狰珉."
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "Change type"
+msgstr "岭脶戕 酏痫"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr "http://www.lexmark. Linux 蛾躐."
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "陪赆糗篝狍 SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "氧桁唧彘 尻趱瘗艮 戾胲礴 Lexmark"
+msgid "Use CD/DVDROM to backup"
+msgstr "遵摅 CD/DVDROM 汩 翎 狁麇哚 狍鲠脲哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"祥 镤玢镞 豉 尻趱瘗酤 戾胲礴 痫 疳褫黠眙衢 狃 翮 Lexmark 躔矬翮襁骘蹴 "
-"禳盹 麸痖觑 尻趱瘗糨, 溴 躔矬翮襁骘蹴 尻趱瘗糨 箦 狃镬彡聃箪蓓秕 "
-"躔镫镢轶糨 孱躔珩弭玺蒡 尻趱瘙箦. 嗅襻赆膻 篚礓蒹翦 麸 尻趱瘗艮 筢 箦 "
-"扉 麸痖贽 椠襻 聃桁唧翦 麸 篝 扃鬈礴灬 痫 暹磲 篚礓邃屐蓓矧."
+"吁泖狁玺揆獒, 邈赆糗篝狍 镫镪腌颃桤赍.\n"
+"瘤衢褫篝 翮 溟箨蒴 麸 CD 尻赀礴箸 赆 疳艮篝 return 汩 "
+"屦犴尻赀礴箸.\n"
+"\n"
+"\n"
+"瞄 痣珩秭锺咤 篦弭殛 戾 溟锺棹箦轵 狨艮 翮 蓐滹箸 麸 Mandrake Linux,\n"
+"篚焘秕脲豸暹翦 翮 箦脒溽: \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"须珩秭锺咤 篦弭殛 戾 糸 聃桁唧彘 麸 篚篝揿狒 筢 躔荞黠蹴 篝 "
+"篦弭殛黒n"
+"赍鲕脶轱 麸 屦唧珈秕 镤玢稞 黢摅珧 麸 Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "paranoid"
+msgstr "嗅襻盹"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
msgstr ""
-"氧桁哝弭 蓓犴 尻趱瘗艮 laser OKI winprinter. 刘麸 镩 尻趱瘗糨騖n"
-"贶盹蹴 黢摅 屙 痫臊 彘溟觑 瘃镪腼 屦殛镩睐磉狎 赆 汩' 狨酎 "
-"脲轸秕胥稞 禳盹 犴 暹磲 篚礓屐蓓镩 篝珥 瘃 疳褴腚珉 椠襻. 另 暹磲 "
-"篚礓屐蓓矧 箦 茈腌 椠襻 箦 蓓犴 孱躔珩弭玺 尻趱瘙箦 疳襻赆膻 篝珥 瘃 "
-"疳褴腚珉 瘃轫 尻趱瘙箦翦 翮 瘃 滹觊灬篝殛 箦脒溽. 拈狯锺弭殛 "
-"尻趱瘗艮 溴 栳 脲轸秕胥摅彘. 聃桁唧彘 麸 酏痫 簖礓弩珧 栳 徙盹玷稞 "
-"狃 麸 镤玢."
+"琉矬麸朕 珉尻赳镯殛稞 扃睚灬麸 戾糗 狃 贶桢 朕 犴糸泷荟 狍鲠脲哚 篝:"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr "抨酏瘗箸"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "氧桁唧彘 OKI winprinter"
+msgid "Resolution"
+msgstr "另茈躞"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-" 尻趱瘗艮 筢 溴 躔荞麇 篝 脒篝, 疳襻赆膻 溟犭蓊翦 蓓犴 篚焘狒 蓓犴 "
-"疳顸祜轱 尻趱瘗艮."
+"瞄 磲 尻趱瘙箦翦 箦 蓓犴 SMB 尻趱瘗艮, 瘃蒺彘 磲 濑箦翦 麸 溟牯踽挈 镬 "
+"SMB (隅戾啭箸! 甜锺暹 磲 暹磲 溟狯锺弭殛 狃 麸 溟牯踽挈 镬 TCP/IP!) "
+"赆 唧 翮 溟妪桴眢 IP 麸 孱躔珩弭玺 尻趱瘙箦, 麸 镬 麸 尻趱瘗艮 "
+"篝镯 镳镞 屦殍蹯暹翦 瘃忉箸, 赆棹 赆 镳镩徜摒雉 狃狁徇翮翮 痣珩秭锺哚 "
+"疱襁 犍溟觑 黢摅翮, 犍溟觑 瘃忉箸 赆 麸燧 镬茕狎 羼汜筮狎."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+" Accept/Refuse icmp echo."
msgstr ""
"\n"
"\n"
-" Printerdrake."
+" 琉镤秣 恶礴箸."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "蚤 祜眙蓦 尻趱瘗艮 蓣弭;"
+msgid "reconfigure"
+msgstr "屦犴狁扉箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "硼殡镢 祜眙蓦秕 尻趱瘗艮"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 篝 XFree "
+"%s,\n"
+"醒嫌献: 信裳撂猎墒 招嫌郧焉吻 - 绦涎派 土 辛觅优 韵 招纤厦捎郧 恿."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Reading printer database..."
-msgstr "另茔睐箸 廛箸 溴滹燧睐 尻趱瘗酤..."
+msgid "Xinetd Service"
+msgstr "震珩弩哚 Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "硼殡蓊翦 麸 祜眙蓦 麇轳镪唔玺"
+msgid "access to network tools"
+msgstr "瘃忉箸 箦 羼汜脲哚 溟牯"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "燥 祜眙蓦 暹磲 簌篝"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
+
+#: ../../share/advertising/03-software.pl:1
+#, fuzzy, c-format
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr "Linux 屦孱羼汜筮"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr "像唧翦 脒篝 豉 尻趱瘗酤 痫 犴轺礤珀犴 狨酎灬翎."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"遇茈灬 赆糗 翮 邈赆糗篝狍 麸 aboot, \n"
+"瘃矬疖桢獒 忮忾狍燧礴 邈赆糗篝狍珧, 彡 赆 犴 狨酎 蓣彘 筢 狃雉蓦弩灬 "
+"翮 赆翎篝耧鲛 翮 瘃珧 赆糗綮珞珧;"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"燥 Printerdrake 篚磔犟轫 麸 镬 麸 祜眙蓦秕 狃 麸 狨酎灬麸 屙麸痖箪 "
-"戾 翮 脒篝 豉 祜眙蓦 狃 翮 廛箸 溴滹燧睐 尻趱瘗酤 汩 磲 翮 "
-"赆臊翦耒 屦殡镢. 刘艮 屦殡镢 祓锺暹 磲 暹磲 胲栾, 彘溟贶 遘 "
-"尻趱瘗艮 筢 溴 暹磲 赆翎鼯耒燧盹 篝珥 廛箸 溴滹燧睐. 腻唪 腼轲 犴 "
-"屦殡镢 麸 尻趱瘗艮 暹磲 簌篝 赆 贶眙 觌殛 篝 \"燥 祜眙蓦 暹磲 簌篝"
-"\" 遘  贶眙 觌殛 篝 \"硼殡蓊翦 麸 祜眙蓦 麇轳镪唔玺醆" 汩 磲 "
-"屦殡蓊弭 麇轳镪唔玺 麸 祜眙蓦 狃 翮 屦屙 镨鏫n"
-"瞄 麸 尻趱瘗艮 筢 麸 Printerdrake 怦揸:\n"
"\n"
-"%s"
+"\n"
+" Drakbackup\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 孱' 锺轶祜齖n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Drakbackup\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "燥 祜眙蓦 尻趱瘗艮 筢"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"硼犴狯锺 硼殡邈燧睐韁n"
+"榴麇啭"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "另茔睐箸 廛箸 溴滹燧睐 尻趱瘗酤..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "燥痫桢筮"
+msgid "Please fill or check the field below"
+msgstr "嗅襻赆膻 咫葶铘 篚祓腌颃篝 麸 疳襻贶豉 疱溥"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "绣耖泷狯"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "容脲翦 磲 狃镨珀妪箦翦 糸 犭脶爿 麸 /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "柬镬 尻趱瘗艮"
+msgid "Boot Protocol"
+msgstr "旭镫腼 抨赀礴箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"受桢 尻趱瘗艮 黢彘苕弭衢 蓓 镬 (.. \"尻趱瘗艮騖").葬 疱溥 绣耖泷狯 "
-"赆 燥痫桢筮 溴 黢彘苕弭衢 磲 篚祓腌聩栾. 胚磲 狃胲 篦獒 汩 麸躜 "
-"黢摅翦."
+msgid "LVM-disks %s\n"
+msgstr "倪箨镩 LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "砰筌沐翦 柬镬 抨趱瘗艮 赆 喻獒"
+msgid "The package %s is needed. Install it?"
+msgstr "燥 疳贻麸 %s 暹磲 狃狁徇翮麸. 歪 邈赆翎篝徼暹;"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "眠盹眙衢 溟徼蒹殪弪 镩 椠皴 篝 CUPS..."
+msgid "On boot"
+msgstr "郁珥 尻赀礴箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "鸽邈黠 赆 颀桁轶 翮 篚箨艴 HPOJ..."
+msgid "Bus identification"
+msgstr "另徙睐耖篝殛 椠襻"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Please make a backup of your data first"
+msgstr "嗅襻赆膻 贶眙 瘃 蓓 犴暨泷狯 狍鲠脲哚 豉 溴滹燧睐 筢"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "隋麸黹挈"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
+"各弭 疱耖篌羼秕 狃 蓓犴 溥箨秕, 箦 痫辄 栎脲翦 磲 邈赆翎篝摅弭 麸 "
+"Linux;"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "榆聩箸 篝 痫膈黢珞糸贽 篚箨艴 HP 痫 溟徼蒴弭"
+msgid "Boot ISO"
+msgstr "抨赀礴箸 ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "陪赆糗篝狍 疳贻麸 mtools..."
+msgid "Eritrea"
+msgstr "篷蹊襻哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "陪赆糗篝狍 疳贻麸 SANE..."
+msgid "Remove List"
+msgstr "诉篝 瘤徇皴箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "陪赆糗篝狍 疳贻麸 HPOJ..."
+msgid "A customizable environment"
+msgstr "疙 瘃矬狁祜纥戾盹 疱耖廛腚镯"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+msgid "Inuktitut"
msgstr ""
-"胚磲 尻趱瘗艮 筢 扉 痫膈黢珞糸贽 篚箨艴 狃 翮 HP 翮 Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-"
-"V100), an HP PhotoSmart or an HP LaserJet 2200;"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "疙 簌篝 URI 瘃蒺彘 磲 彘筢麒暹!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Command line"
-msgstr "民犰燹 屙麸膻"
+msgid "Morocco"
+msgstr "提顸觑"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
+msgid "Which printer model do you have?"
+msgstr "蚤 祜眙蓦 尻趱瘗艮 蓣弭;"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "拈狍揄 羼汜筮狎 箦 屙麸朕"
+msgid "Add a new printer"
+msgstr "旭矬柁赙 磔秕 尻趱瘗艮"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "埋蓁珀 麸 祜眙蓦: %s %s"
+msgid " All of your selected data have been "
+msgstr " 茧 翎 屦殡邈燧磲 溴滹燧磲 蓣秕 "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "疙 簌篝 URI 瘃蒺彘 磲 彘筢麒暹!"
+msgid "<-- Delete"
+msgstr "<-- 拈徙襻鲛"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "吁箨艴 尻趱瘗艮 URI"
+msgid "Nepal"
+msgstr "湾疖"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"甜锺暹翦 磲 锺唧弭 赆翦蹊暹犴 麸 URI 汩 翮 瘃忉箸 篝镯 尻趱瘗艮. 燥 URI "
-"瘃蒺彘 磲 翮皴 暹翦 糸 CUPS 暹翦 糸 Foomatic 瘃镤獒泷狯蒡. 槛 瘗 溴 "
-"躔矬翮襁骘眙衢 镩 镩 URI 酏痫 狃  翎 spoolers."
+msgid "cpu # "
+msgstr "屦孱羼汜篝掾 # "
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Port"
-msgstr "三襻"
+msgid "chunk size"
+msgstr "燧沐栾 chunk"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "拈牯踽挈 镬 尻趱瘗艮 IP"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr " 狁殍禳 椠襻 瘃蒺彘 磲 暹磲 彡蓠衢矧 狁殍禳!"
+msgid "Problems installing package %s"
+msgstr "旭腌灬 赆糗 翮 邈赆糗篝狍 麸 疳贻麸 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "燥 溟牯踽挈 镬 麸 尻趱瘗艮 麸 IP 脲唣彘!"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+"柔 胲忮翦 扉 彘滹痫哏箸 遘 麸 鲲耵唢 暹磲 戾汜臊翦耧 狃 狨艮 翮 糸燹"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"瞄 磲 尻趱瘙箦翦 箦 蓓犴 尻趱瘗艮 socket TCP , 瘃蒺彘 磲 濑箦翦 麸 \n"
-"溟牯踽挈 镬 麸 尻趱瘗艮 赆 瘃镝轳弭殛 麸 狁殍禳 椠襻 ( 孱 锺轶祜 "
-"9100). 郁秕 孱躔珩弭玺蒡 HP JetDirect 椠襻 篚磙棂 暹磲 9100, 箦 茈腼躜 "
-"孱躔珩弭玺蒡 痫殛唠. 腻唪 麸 邈麇轳咪轱 黢摅珧 麸 蹼殛稞 筢."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr "犴轺礤珀 孱' 锺轶祜."
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Add a scanner manually"
+msgstr "旭矬柁赙 筢聩艮 麇轳镪唔玺"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "硼殡镢蒡 尻趱瘗艮 TCP/Socket"
+msgid "Reload partition table"
+msgstr "另犴甍箸 疬磲赆 赆翎綮摅妁"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", 椠襻 %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "歪, 屦殍蹯 狨酎灬翮 瘃矬疠脶箸 戾 (黢摅翮, 疱耖廛腚镯)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\",椠襻 %s"
+msgid "Search for fonts in installed list"
+msgstr "另徭摁珞 泷犰灬麸箦轳 篝珥 脒篝 邈赆糗篝狍珧"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning network..."
-msgstr "另徭摁珞 篝 溥牯躏..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "燥 燥痖挈 倪牯躏 溴 翦脲辋礤 戾 `.0', 翦耢狒轶禳."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤"
+msgid "Boot"
+msgstr "抨赀礴箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "燥 镬 翮 NCP 秕褴 脲唣彘!"
+msgid "Tuner type:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"峨腼\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 狃朦\n"
+"\n"
+" Linux\n"
+"\n"
+" CUPS 抨酏瘗箸 育篝珈醆n"
+"\n"
+" 狃朦 孱躔珩弭玺掾\n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+" CUPS\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 尻翦脲唪衢\n"
+"."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "燥 镬 麸 孱躔珩弭玺 NCP 脲唣彘!"
+msgid "\"Menu\" key"
+msgstr "须揸赳 \"体盹齖""
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
+"\n"
+"\n"
+" Printerdrake."
+
+#: ../../standalone/draksec:1
#, c-format
-msgid "Print Queue Name"
-msgstr "柬镬 硝褴 抨趱瘗艮"
+msgid "Security Administrator:"
+msgstr "拈狩彘耖篝掾 馏鲠脲哚:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer Server"
-msgstr "蓬躔珩弭玺掾 抨趱瘙箦"
+msgid "Please enter your login"
+msgstr "嗅襻赆膻 彘筌沐翦 麸 镬 黢摅翮"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"犴 锺轶翦 磲, 蓦邈黠 溟赆轾燔豉 豉 狁麇啭 篝镯 狁鏖挈 赆糗腼泔 黢摅翮."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"瞄 磲 尻趱瘙箦翦 箦 蓓犴 尻趱瘗艮 NetWare, 瘃蒺彘 磲 濑箦翦 麸 镬 麸 "
-"孱躔珩弭玺 尻趱瘙箦 NetWare (隅戾啭箸! 甜锺暹 磲 暹磲 溟狯锺弭殛 狃 麸 "
-"溟牯踽挈 镬 TCP/IP!), 麸 镬 麸 尻趱瘗艮 篝镯 镳镞 屦殍蹯暹翦 "
-"瘃忉箸, 赆棹 赆閈n"
-"镳镩徜摒雉 狃狁徇翮翮 痣珩秭锺哚 疱襁 黢摅翮 赆 犍溟觑 瘃忉箸."
+"腻 蓣弭 簖礓弩 戾 麸 溟徜哧趱.\n"
+"溺扉秕胥摅翦 爝 贶盹眙狎 觌殛 篝 '妖桁轶'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "硼殡镢蒡 抨趱瘗艮 NetWare"
+msgid "Fonts copy"
+msgstr "另糸泷狯 民犰灬麸箦轳"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"吁礓蒹翦 麸 尻趱瘗艮 筢 箦 蓓犴 孱躔珩弭玺 Linux 赆 篚礓蒹翦 箦 狨酎 翎 "
-"扃麽磙灬翎 Windows 筢 疱胲翦騖n"
-"\n"
-"容脲翦 瘃徙灬糸贶 磲 篚礤鬟箦翦 糸 聃桁唧彘 麸 尻趱瘗艮 筢 痫 贶礤翦;"
+msgid "Automated"
+msgstr "刘酎灬麸"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "容脲翦 磲 滹觊燔箦翦 糸 聃桁唧彘;"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"氧桁唧翦 麸 孱躔珩弭玺 Windows 翦 磲 暹磲 溟徼蒹殪矧 尻趱瘗艮 篝 "
-"瘃镫腼 IPP 赆 聃桁唧翦 糸 尻趱瘙箦轵 狃 狨酎 麸 扃鬈礴灬 戾 麸 酏痫 "
-"簖礓弩珧 \"%s\" 篝 Printerdrake.\n"
-"\n"
+" 尻趱瘗艮 \"%s\" 狯衢褫桤赍 戾 屦轸貅哚 狃 麸 Star Office/OpenOffice.org/"
+"GIMP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksec:1
+#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"燥燧狎 Windows 燥燧狎 Windows 孱躔珩弭玺掾 黢摅翮騖n"
+"怎痖挈: 刘艮 暹磲 趱痖贽 狍鲕脲獒 痫 篚黹篝荇衢 箦 汩 躔镫镢轶艮 痫 栳 "
+"篚礓蒎翎 篝 拈徜哧趱  疱胲翮.\n"
"\n"
-" 燥燧狎 Windows 孱躔珩弭玺掾\n"
+" 狰珉: 震荞黠蹴 贶痫轱 疱耖锺轶祜, 赆 尻翦腼翎 疱耖篌羼弪 "
+"狨酎灬麸 蓦邈黠 贶桢 怦茕.\n"
"\n"
-" 燥燧狎 Windows 孱躔珩弭玺掾 想镪腌颃桤赍\n"
+"狰珉羼: 狍鲕脲獒 暹磲 狁赍糗 貘珉 汩 磲 贶礤翦 麸 簖篝珈 "
+"孱躔珩弭玺掾 痫 祓锺暹 磲 溴黥暹\n"
+" 篚礓蒹彘 狃 痫腚稞 疱胲翦. 另 麸 扃鬈礴灬 暹磲 禳盹 "
+"疱胲翮 篝 拈徜哧趱, 屦殡蓊翦\n"
+" 麸 麽扃朦翦耧 屦唣邃颸n"
"\n"
-" 燥燧狎 Windows 孱躔珩弭玺掾 LPD Printerdrake\n"
+" 嗅襻盹 屦唣邃: 检镩 戾 麸 疳襻疖睐 屦唣邃, 犭胲 戾 麸 簖篝珈 屙翦膻 "
+"觌彘篝 赆 戾 糸 屦殡镢蒡\n"
+" 狍鲠脲哚 篝 燧汩篝颸n"
+"\n"
+"拈狩彘耖篝掾 馏鲠脲哚:\n"
+" 另 蓣彘 屦殡邈暹 麸 '砰滹痫檗箦轵 馏鲠脲哚' 酎翦 栳 "
+"狃矬糨腚镯翎 彘滹痫檗箦轵 狍鲠脲哚 篝镯 黢摅翮 (镬 黢摅翮\n"
+" 珉尻赳镯殛 燹眭灬)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "醒吓赡闲仙怯 劣至伺闪!"
+msgid "Save packages selection"
+msgstr "琉镨揸艴箸 屦殡镢掾 疳贻豉"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "燥 镬 汩 麸 Samba 脲唣彘!"
+msgid "Remove the last item"
+msgstr "瘤徇皴箸 麸 翦脲豸徇秕 篝镩麇唢"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "胚翦 麸 镬 麸 孱躔珩弭玺 IP 麸 瘃蒺彘 磲 滹栾!"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "黢摅翮"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "彭麸疬篝珀犴 狨酎灬翎"
+msgid "No net boot images created!"
+msgstr "腻 溏扉秕胥掼珀犴 彘挈礤 尻赀礴箸 溟牯!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "响茕 羼汜筮狎:"
+msgid "use pptp"
+msgstr "黢摅 pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "柬镬 瘘耧:"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "硼殡蓊翦 糸 躔珩弩咤 痫 栳 铄觊盹 狨酎灬翎 赆糗 翮 尻赀礴箸"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP 溟妪桴眢 SMB 孱躔珩弭玺"
+msgid "Learn how to use this printer"
+msgstr "誊桢翦 瘗 磲 麇轳轶桢唪 狨酎 麸 尻趱瘗艮"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "拈牯踽挈 镬 SMB 孱躔珩弭玺"
+msgid "Configure the network now"
+msgstr "妖桁轶 溟牯 酤襻"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr "犴轺礤珀 黢摅翮."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose a mirror from which to get the packages"
+msgstr "硼殡蓊翦 酎痫 狃 麸 镳镞 栳 氵礤 朕 疳贻豉"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"瞄 磲 尻趱瘙箦翦 箦 蓓犴 SMB 尻趱瘗艮, 瘃蒺彘 磲 濑箦翦 麸 溟牯踽挈 镬 "
-"SMB (隅戾啭箸! 甜锺暹 磲 暹磲 溟狯锺弭殛 狃 麸 溟牯踽挈 镬 TCP/IP!) "
-"赆 唧 翮 溟妪桴眢 IP 麸 孱躔珩弭玺 尻趱瘙箦, 麸 镬 麸 尻趱瘗艮 "
-"篝镯 镳镞 屦殍蹯暹翦 瘃忉箸, 赆棹 赆 镳镩徜摒雉 狃狁徇翮翮 痣珩秭锺哚 "
-"疱襁 犍溟觑 黢摅翮, 犍溟觑 瘃忉箸 赆 麸燧 镬茕狎 羼汜筮狎."
+"腻 祓锺 磲 犭胲铢 燧沐栾 篝珥 赆糗綮珞 FAT, \n"
+"瘃镪朕桤赍 麸 疳襻贶豉 胲栾: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "硼殡镢蒡 尻趱瘗艮 SMB (Windows 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "渝 痫辄 麸燧 栎脲翦 磲 戾翎觊礴桢唪;"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "抨趱瘗艮 \"%s\"篝镯 孱躔珩弭玺 \"%s\""
+msgid "Do you want to click on this button?"
+msgstr "容脲翦 磲 贶礤翦 觌殛 箦 狨酎 麸 觑蹯疬;"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", 尻趱瘗艮 \"%s\"篝镯 孱躔珩弭玺 \"%s\""
+msgid "Bahamas"
+msgstr "甜狩莒弪"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "燥 狃镬彡聃箪蓓 镬 尻趱瘗艮 脲唣彘!"
+msgid "Manual configuration"
+msgstr "族轳镪唔玺 颀桁轶"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "燥 狃镬彡聃箪蓓 溟牯踽挈 镬 脲唣彘!"
+msgid "search"
+msgstr "犴徭摁珞"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "琉镬彡聃箪蓓矧 镬 尻趱瘗艮"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"刘酎 麸 疳贻麸 鲲耵彘 翮 屦殡邈燧礴 溟荇犷 痣珀赳镫镢唢 痫 蓣彘 \n"
+"屦殡邈暹 篝 /etc/sysconfig/keyboard. 刘酎 祓锺暹 磲 聃桁轶翦 戾 翮 \n"
+"黢摅 麸 羼汜脲唢 kbdconfig. 旭蒺彘 篦邃 疖眙 磲 暹磲 屙羼泔痫殓燧盹."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "琉镬彡聃箪蓓 溟牯踽挈 镬"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (镤玢 瘃镡镫掾 邈赆糗篝狍珧)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-"瞄 磲 黢珞殪镳镩摅弭 蓓犴 狃镬彡聃箪蓓 尻酏瘗箸 瘃蒺彘 磲 濑箦翦 麸 "
-"溟牯踽挈 镬 麸 孱躔珩弭玺 尻趱瘙箦, 赆棹 赆 麸 镬 麸 尻趱瘗艮 "
-"箦 狨酎 麸 孱躔珩弭玺."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "硼殡镢蒡 狃镬彡聃箪蓓秕 lpd 尻趱瘗艮"
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
+msgstr ""
+"燥 Syslog 暹磲 躔珩弩哚 痫 黢珞殪镳镩稞 痫腚蒡 茈脲 躔珩弩咤 \n"
+"汩 磲 贶盹蹴 邈泷狯蒡 篝 狁麇哚 疳襻觑腼珞珧 篚篝揿狒矧 (log files)\n"
+"吁磉篝狒衢 篚礤鬓 脲轸秕胥哚 狨艮 翮 躔珩弩哚."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Manual configuration"
-msgstr "族轳镪唔玺 颀桁轶"
+msgid "Unknown/Others"
+msgstr "躲睐篝/峨腼"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "旭蒺彘 磲 屦殡蓊翦/锺唧弭 扉 篚箨艴/尻趱瘗艮!"
+msgid "No TV Card detected!"
+msgstr "腻 怦蓁珀 贶耵 翮脲狍珧!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(嗅褴腚珉弪 椠皴: /dev/lp0, /dev/lp1, ..., 犴暨篝镩麇 豉 LPT1:, "
-"LPT2:, ..., 1矧 尻趱瘗艮 USB: /dev/usb/lp0, 2矧 USB 尻趱瘗艮: /dev/usb/"
-"lp1, ...)."
+msgid "Options"
+msgstr "硼殡镢蒡"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "硼殡蓊翦 箦 痫哚 柁襻 暹磲 篚礓邃屐蓓矧 尻趱瘗艮 筢."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr " 尻趱瘗艮 \"%s\" 暹磲 痣蒿 瘃镥痖脲沆蓓矧 尻趱瘗艮."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 翮 椠襻 秕 暹磲 篚礓邃屐蓓矧 尻趱瘗艮 筢 彘筌沐翦 "
-"蓓 镬 篚箨艴掾/狁麇唢 篝 泷犰燹 彘筢泫戕"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 麸 尻趱瘗艮 篝镯 镳镞 栳 狃矬糨腚镯翎 镩 羼汜筮弪 "
-"尻酏瘗箸."
+"氧桁哝弭 蓓犴 尻趱瘗艮 laser OKI winprinter. 刘麸 镩 尻趱瘗糨騖n"
+"贶盹蹴 黢摅 屙 痫臊 彘溟觑 瘃镪腼 屦殛镩睐磉狎 赆 汩' 狨酎 "
+"脲轸秕胥稞 禳盹 犴 暹磲 篚礓屐蓓镩 篝珥 瘃 疳褴腚珉 椠襻. 另 暹磲 "
+"篚礓屐蓓矧 箦 茈腌 椠襻 箦 蓓犴 孱躔珩弭玺 尻趱瘙箦 疳襻赆膻 篝珥 瘃 "
+"疳褴腚珉 瘃轫 尻趱瘙箦翦 翮 瘃 滹觊灬篝殛 箦脒溽. 拈狯锺弭殛 "
+"尻趱瘗艮 溴 栳 脲轸秕胥摅彘. 聃桁唧彘 麸 酏痫 簖礓弩珧 栳 徙盹玷稞 "
+"狃 麸 镤玢."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr "犴轺礤珀."
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "缅黹 麸 屦孱羼汜篝 (.. 8 汩 PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "像唧翦 脒篝 豉 尻趱瘗酤 痫 犴轺礤珀犴 狨酎灬翎."
+msgid "Auto-detected"
+msgstr "彭麸疬篝珀犴 狨酎灬翎"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "旭矧 麸 疳顸 溴 躔荞麇 茈腌 屙犭脶牯殛"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr "犴轺礤珀."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "祥 疳襻贶豉 尻趱瘗糨 怦蓁珀犴 狨酎灬翎."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"旭彘翎 磲 聃桁唧翦 麸 躔镫镢轶艮 筢 汩 翮 邈赆糗篝狍 麸 溟彡镬轶艮 "
+"PXE  孱躔珩弭玺 DHCP \n"
+"赆 溟彡镬轶艮 TFTP  溟彡镬轶艮 邈赆翎篝荏妁.\n"
+"体 狨艮 翮 屦殡镢, 茈腼 躔镫镢轶糨 篝 麸痖挈 筢 溥牯躏 栳 祓锺稞 磲 "
+"邈赆翎篝徼稞 戾 翮 黢摅 狨麸 麸 躔镫镢轶艮.\n"
+"\n"
+"洛忉轾桢唪  蓣弭 聃桁唧彘 翮 瘃忉箸 篝 倪牯躏/拈徜哧趱 戾 翮 黢摅 "
+"麸 drakconnect 瘃轫 瘃秣摅弭.\n"
+"\n"
+"隅. 柔 瘃蒺彘 磲 蓣弭 扉 贶耵 溟牯 汩 磲 聃桁唧弭 麸 燥痖挈 筢 "
+"倪牯躏 (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 麸 尻趱瘗艮 篝镯 镳镞 栳 狃矬糨腚镯翎 镩 羼汜筮弪 "
-"尻酏瘗箸 濑篝 麸 镬 篚箨艴掾/狁麇唢 篝 泷犰燹 彘筢泫戕"
+"腻 躔荞麇 咫妪桢耧 齄耧 汩 1MB bootstrap! 邈赆糗篝狍 栳 篚礤鏖篝暹, "
+"犭胲 汩 磲 铄觊磙箦翦 麸 簖篝珈 筢, 栳 黢彘狍翦 磲 溏扉秕胥摅弭 扉 "
+"赆糗綮珞 bootstrap 戾 麸 DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12036,1178 +11940,822 @@ msgstr ""
"嗅襻赆膻 屦殡蓊翦 麸 尻趱瘗艮 痫 栎脲翦 磲 聃桁唧弭 彘筌沐翦 蓓 镬 "
"篚箨艴掾/狁麇唢 篝 泷犰燹 彘筢泫戕"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"彭犭脶牯殛, 祓锺暹翦 磲 彘筌沐翦 蓓 镬 篚箨艴掾/狁麇唢 篝 泷犰燹 "
-"彘筢泫戕"
+msgid "Refuse"
+msgstr "恶礴箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"另 溴 暹磲 狨酎 痫 栎脲翦 磲 聃桁唧弭, 彘筌沐翦 麸 镬 篚箨艴掾/镬 "
-"狁麇唢 篝 泷犰燹 彘筢泫戕"
+"燥 HardDrake 赳蓣彘 扉 犴喵礤躞 蹼殛稞 赆 瘃镝轳弭殛 聃桁哝彘\n"
+"麸 磔/犭脶沆蓓 蹼殛."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "拈徼蒹殪镩 尻趱瘗艮"
+msgid "Remote Printers"
+msgstr "琉镬彡聃箪蓓镩 尻趱瘗糨"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "腻 怦蓁珀 尻趱瘗艮!"
+msgid "Creating and formatting file %s"
+msgstr "溺扉秕胥哚 赆 祜聆镳镞珞 狁麇唢 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "旭蒺彘 磲 锺唧弭 扉 篚箨艴 蓓 镬 狁麇唢!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "犴 锺轶翦 磲, 蓦邈黠 汩 瘃矬柁赙/狯徇皴箸 狁麇啭 sgid."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"腻 怦蓁珀犴 麸痖觑 尻趱瘗糨! 瞄 磲 聃桁唧弭 禳盹 筢 蓓犴 尻趱瘗艮 "
-"濑篝 麸 镬 尻趱瘗艮/镬 狁麇唢 篝 泷犰燹 彘筢泫戕 (嗅褴腚珉弪 "
-"椠皴: /dev/lp0, /dev/lp1, ..., 犴暨篝镩麇 豉 LPT1:, LPT2:, ..., 1矧 "
-"尻趱瘗艮 USB: /dev/usb/lp0, 2矧 USB 尻趱瘗艮: /dev/usb/lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "燥痖挈 抨趱瘗艮"
+msgid "Choose an existing LVM to add to"
+msgstr "硼殡蓊翦 蓓 躔荞黠 LVM 篝 镳镞 栳 氵礤 瘃矬柁赙"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "尻趱瘗艮 USB \\#%s"
+msgid "xfs restart"
+msgstr "屦犴尻赀礴箸 xfs"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "抨趱瘗艮 篝珥 疳褴腚珉 柁襻 \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+" 尻趱瘗艮 \"%s\" 躔荞麇 掬,\n"
+"胚篝 廨忉轱 汩 翮 屦殛茈貘 豉 聃桁唧妁;"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "抨趱瘗艮 \"%s\" 箦 孱躔珩弭玺 SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "溴 躔荞黠蹴 溟徼蒹殪弪 赆翎綮摅彘"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "抨趱瘗艮 溟牯 \"%s\", 椠襻 %s"
+msgid "Use the scanners on hosts: "
+msgstr "遵摅 豉 筢聩酤 篝秕 躔镫镢轶糨:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "埋蓁珀 %s"
+msgid "Unselected All"
+msgstr "琉镥痖腼戕 茧"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "抨趱瘗艮 \"%s\" 箦 孱躔珩弭玺 SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", 尻趱瘗艮 溟牯 \"%s\", 椠襻 %s"
+msgid "Encryption key (again)"
+msgstr "孰彘溥 犟躔麸泷荟珞珧 (钺碥)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"吁泖狁玺揆獒, 尻趱瘗艮 筢 邈赆翎篝荑珀 赆 聃桁唧翮赍!\n"
-"\n"
-"甜锺暹翦 酤襻 磲 尻趱瘙箦翦 戾 翮 屙麸朕 \"抨酏瘗箸\" 翮 弼狁祜戕 筢 "
-"(篚磙棂 贶豉 狃 麸 戾盹 \"榴麇唢\").\n"
-"\n"
-"另 栎脲翦 磲 瘃矬栎箦翦, 磲 狯衢褫箦翦 磲 戾麸盹燔箦翦 麸 尻趱瘗艮 筢 "
-"犴 栎脲翦 磲 犭胲铄翦 糸 瘃镥痖脲沆蓓弪 聃桁唧彘 筢 (栎箸 麸 麽耵轱, "
-"痫辄翮翎 尻酏瘗箸) 屦殡蓊翦 \"抨趱瘗艮騖" 篝 綮揿 \"针殛黒"麸 瘦眙耧 "
-"烹葶黠 Mandrake."
+msgid "Samba share name missing!"
+msgstr "燥 镬 汩 麸 Samba 脲唣彘!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"刘酎灬翮 犴喵礤躞 尻趱瘗酤 篚礓屐蓓镩 箦 扃麽磙灬翎 痫 蓣秕 Microsoft "
-"Windows"
+msgid "True Type install done"
+msgstr " 邈赆糗篝狍珧 True Type 镫镪腌颃桤赍"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤 篚礓屐蓓镩 篝 麸痖挈 筢 溥牯躏"
+msgid "Detection in progress"
+msgstr "另喵礤躞 箦 孱蓦轭"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤 篚礓屐蓓镩 箦 狨酎 麸 扃鬈礴灬"
+msgid "Build Whole Kernel -->"
+msgstr "溺扉秕胥哚 想腌耧 絮褶磲 -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "梳膻 锺唧狒 篝 %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "嗅襻赆膻 彘筌沐翦 翮 溟箨蒴 另徕荑扉箸 榴桉荇 篝镯 镤玢 %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+" 疳襻贶豉 尻趱瘗艮騖n"
"\n"
-" 抨趱瘗艮 箱玢\n"
-"\n"
-"\n"
-"\n"
-" 犴轺礤珀錦n"
-"\n"
-" 硼屙 蛾躐."
+"%s%s\n"
+"暹磲 莒弩 篚礓屐蓓矧 篝 簖篝珈 筢"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-" 抨趱瘗艮 箱玢\n"
-"\n"
-"\n"
-"\n"
-" 犴轺礤珀錦n"
-"\n"
-"\n"
-"\n"
-" 硼屙 蛾躐."
+#, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "曙轫耒篝镩 尻趱瘗糨 篝秕 躔镫镢轶糨/溥牯踽: "
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-" 抨趱瘗艮 箱玢\n"
-"\n"
-" 燥燧狎 Windows \n"
-"\n"
-" 犴轺礤珀 燥燧狎 Windows \n"
-"\n"
-" 燥燧狎 Windows \n"
-"\n"
-" 硼屙 蛾躐."
+" 屙麸朕 \"%s\" 屦唧珧 筢 屦轸褫疱 磲 赳镳镳镩摅弭 糸 聃桁唧彘 屦殡镢 "
+"汩 扉 篚汴尻耖燧礴 羼汜筮 尻酏瘗箸. 琉胲 瘃矬栎箦翦 糸 屦殍蹯玺蒡 "
+"聃桁唧彘 篝珥 泷犰燹 屙麸膻, .. \"%s<狁麇唢>\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"梳膻 锺唧狒 篝镯 箱玢 妖桁轶珧 抨趱瘗艮\n"
-"\n"
-" 镤玢 狨酎 筢 怙玷苠 篝珥 邈赆糗篝狍 麸痖掰 狃镬彡聃箪蓓 "
-"尻趱瘗酤 痫 栳 黢珞殪镳镩玷稞 箦 狨酎 赆 箦 茈脶 扃麽磙灬翎 篝 溥牯躏\n"
-"\n"
-"俞 骁糗 弪 糸 狃狁徇翮翦 痣珩秭锺咤 汩 磲 聃桁唧弭 麸躜 尻趱瘗糨 "
-"赆 磲 狃镪艮箦翦 瘃忉箸 箦 秕 麸躜 溟徼蒹殪秕 镤玢稞 尻趱瘗酤, "
-"屦殡镢蒡 豉 镤玢 赆 麸躜 酏痫躜 篚礓蒹妁."
+"渝 戾耖贻 疱耖痿彘, 镤玢 %s 黢彘苕弭衢 屦轲胼镯 疳襻燧赳秕 汩醆n"
+"磲 脲轸秕胥摅彘 簌篝, 疳'  痫 篚磙棂 脲轸秕胥暹 赆 鼯襁 狨糨.\n"
+"柔 栎脶翦 磲 濑箦翦 屦轲胼镯 屦殡镢蒡 磲 狯摅弭 麸 镤玢 磲 孱弭荏彘\n"
+"麸 蹼殛 筢 汩 糸 疳襻燧赳秕 痫 黢彘苕弭衢; 孱蒴狍 狨艮 唧\n"
+"瘃镪犭蒹彘 疖泫灬 麸 篚篝揿狒矧, 犭胲 溴 栳 瘃镪犭蒹彘 怆茆."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"梳膻 锺唧狒 篝 羼汜脲唢 颀桁轶珧 翮 曙轫掾 育礓弩珧 麸 拈徜殛酏秕!\n"
"\n"
+"%s\n"
"\n"
-"燥 Printerdrake 溴 祓弩 磲 赆栾襁箦 麸 祜眙蓦 麸 尻趱瘗艮 %s. "
-"嗅襻赆膻 屦殡蓊翦 麸 簌篝 祜眙蓦 狃 翮 脒篝."
+"受眙 觌殛 篝 妖桁轶 汩 磲 铄觊磙箦翦 麸 镤玢 邈赆糗篝狍珧."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "曙"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " 篝 "
+msgid "Searching for new printers..."
+msgstr "另徭摁珞 汩 磔秕 尻趱瘗糨..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "甜咫哝"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "氧桁哝弭衢 尻趱瘗艮 ..."
+msgid " (multi-session)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "另徭摁珞 汩 磔秕 尻趱瘗糨..."
+msgid "Kernel Boot Timeout"
+msgstr "暂腼 遵秕 抨赀礴箸 絮褶磲"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"隅.: 另茈镢 戾 麸 祜眙蓦 麸 尻趱瘗艮 赆 麸 簖篝珈 尻酏瘗箸 栳 "
-"邈赆翎篝徼暹 屦轲胼镯 燧黢 赆 %d MB 腼汩箪殛"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"胚篝 廨忉轱  栎脲翦 磲 聃桁唧弭 翮 尻酏瘗箸 箦 狨酎 麸 扃鬈礴灬;\n"
+" 贶耵 泷狯殛 筢 躔矬翮襁驽 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛 禳盹 戾 "
+"翎 XFree %s.\n"
+" 贶耵 筢 躔矬翮襁驽翎 狃 翎 XFree %s 翎 镳镞 祓锺暹 磲 溥盹蹴 赆臊翦耒 "
+"躔矬艮耖铉 汩 溟溟荏翎翎 泷狯殛."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "容脲翦 磲 屙羼泔痫檗箦翦 翮 尻酏瘗箸 篝秕 疳襻疖睐 尻趱瘗糨 ;\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr " 箱玢 梳糗綮珞珧 DrakX 怦揸 糸 疳襻贶豉 臊箦轵:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"容脲翦 磲 屙羼泔痫檗箦翦 翮 尻酏瘗箸 箦 尻趱瘗糨 篝 麸痖挈 筢 溥牯躏;\n"
+msgid "Hungarian"
+msgstr "硝沣耖挈"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"容脲翦 磲 屙羼泔痫檗箦翦 翮 尻酏瘗箸 篝秕 疳襻疖睐 尻趱瘗糨 箦 贶痫轱 "
-"茈腼 篝 麸痖挈 筢 溥牯躏;\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-" (洛忉轾桢唪  镩 镩 尻趱瘗糨 筢 暹磲 篚礓屐蓓镩 赆 箦 "
-"脲轸秕胥哚).\n"
+"硼殡蓊翦 麸 疳耧鬏 筢騖n"
+" 跑 溴 暹磲 篝镯 赆糗腼泔, 屦殡蓊翦 Unlisted"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "腻 怦蓁珀犴 尻趱瘗糨 痫 磲 暹磲 篚礓屐蓓镩 篝镯 躔镫镢轶艮 筢"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "刘酎灬麸 篚泖耧黹箪 狎 (黢摅 NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"胚磲 %d 尻趱瘗糨 篚礓屐蓓镩 狃艴桢哚 篝 簖篝珈 筢"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"疙狎 茔睐篝矧 尻趱瘗艮 暹磲 篚礓屐蓓矧 狃艴桢哚 篝 簖篝珈 筢"
+msgid "LDAP Server"
+msgstr "蓬躔珩弭玺掾 LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-" 疳襻贶豉 尻趱瘗艮騖n"
-"\n"
-"%s%s\n"
-"暹磲 莒弩 篚礓屐蓓矧 篝 簖篝珈 筢"
+" 躔矬艮耖铉 PCMCIA 瘃矬鲚皴 躔矬艮耖铉 汩 贶耵弪 溟牯, 禳眙屐 觌 \n"
+"篚磙棂 箦 篚篝揿狒 laptop. 腻 栳 尻觊磙箦 尻酎 犴 狨酎 骁翮桢 狃 "
+"麸 \n"
+"黢摅翮, 镳 暹磲 狍鲠胼 磲 邈赆翎篝徼暹 箦 篚篝揿狒 痫 溴 麸 "
+"黢彘苕镯翎."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-" 疳襻贶豉 尻趱瘗艮騖n"
-"\n"
-"%s%s\n"
-"暹磲 莒弩 篚礓屐蓓镩 篝 簖篝珈 筢"
+msgid "Choose your country"
+msgstr "硼殡蓊翦 齄襻"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"祥 疳襻贶豉 尻趱瘗糨騖n"
"\n"
-"%s%s\n"
-"暹磲 莒弩 篚礓屐蓓镩 篝 簖篝珈 筢"
+"- 榴麇哚 吁篝揿狒矧:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "赆 %d 茔睐篝镩 尻趱瘗糨"
+msgid "Standalone Tools"
+msgstr "五鼯耖篝 篷汜脲哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr "赆 蓓狎 茔睐篝矧 尻趱瘗艮"
+msgid "Where"
+msgstr "酗"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "鸽邈黠 麸 篚篝揿狒矧 筢..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "硼犴尻赀礴箸 XFS"
+msgid "but not matching"
+msgstr "犭胲 溴 翎轳檐驽"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-"O 孱躔珩弭玺掾 暹磲 掬 篝 脒篝, 溴 祓锺暹翦 磲 麸 瘃矬栎箦翦 钺碥.\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "嗅襻溴咩灬翎 簌篝 IP:\n"
+"配 祓锺暹翦 磲 屦殡蓊弭 蓓犴 屙犭脶牯殛 镤玢 (OSS ALSA) 汩 翮 贶耵 "
+"搠秕 筢 (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr " 溟妪桴眢 IP 痫 彘筌汜翦 溴 暹磲 簌篝.\n"
+msgid "Configuring PCMCIA cards..."
+msgstr "妖桁轶 赆耵 PCMCIA ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "隋唣彘 IP 麸 孱躔珩弭玺!"
+msgid "kdesu missing"
+msgstr "麸 kdesu 脲唣彘"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Encryption key"
+msgstr "孰彘溥 犟躔麸泷荟珞珧"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "CUPS"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "瘤徇皴箸 屦殡邈燧盹 孱躔珩弭玺"
+msgid "Christmas Island"
+msgstr "娃箫 遵轶麸蹉蓓睐"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "硼孱羼汜筮 屦殡邈燧盹 孱躔珩弭玺"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr ""
+" 邈赆糗篝狍 麸 瘃镢褴祆狒矧 尻赀礴箸 狃蒴貅. 旭镪朕桤赍 麸 彡秕栾 "
+"篥茈灬:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Add server"
-msgstr "旭矬柁赙 孱躔珩弭玺"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr "旭矬柁赙 CUPS."
+msgid "EIDE/SCSI channel"
+msgstr "梳碥腴 EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "拈妪桴眢 IP 麸 躔镫镢轶艮/溟牯:"
+msgid "Set this printer as the default"
+msgstr "像轶禳 狨麸 麸 尻趱瘗艮  瘃镥痖脲沆蓓秕"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"刘酎 躔镫镢轶艮/溥牯躏 暹磲 掬 篝 脒篝, 溴 祓锺暹 磲 瘃矬翦桢 "
-"钺碥.\n"
+msgid "partition %s"
+msgstr "赆糗綮珞 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "嗅襻盹"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "隋唣彘 溟妪桴眢 麸 震镫镢轶艮/拈牯."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
+msgid "<-- Del User"
+msgstr "<-- 拈徙襻鲛 遵摅翮"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "曙轫 黢摅 麸痖掰 尻趱瘗酤"
+msgid "Location on the bus"
+msgstr "容箸 麸 溟猃腼"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "瘤徇皴箸 屦殡邈燧盹 躔镫镢轶艮/溥牯躏"
+msgid "No printer found!"
+msgstr "腻 怦蓁珀 尻趱瘗艮!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "硼孱羼汜筮 屦殡邈燧盹 躔镫镢轶艮/溥牯躏"
+msgid "the vendor name of the device"
+msgstr "麸 镬 赆翎箨艴狍艮 翮 篚箨艴掾"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "旭矬柁赙 躔镫镢轶艮/溥牯躏"
+msgid "Erase entire disk"
+msgstr "拈徙襻鲛 镫腌耧 麸 溥箨秕"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"刘糗 暹磲 翎 扃麽磙灬翎 秕 镩 麸痖贶 篚礓屐蓓镩 尻趱瘗糨(珧) 瘃蒺彘 磲 "
-"暹磲 溟徼蒹殪镩:"
+msgid " (Default)"
+msgstr " (旭镥痖脲沆蓓矧)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"悬翦 CUPS\n"
-"\n"
-" LPD LPRng CUPS\n"
"\n"
"\n"
"\n"
" 孱躔珩弭玺掾\n"
+" 孱躔珩弭玺掾<SERVER_LEVEL> 孱躔珩弭玺掾\n"
"\n"
"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "刘酎灬翮 溟棂箸 翮 颀桁轶珧 CUPS"
+msgid "Automatic reconfiguration"
+msgstr "刘酎灬翮 屦犴狁扉箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "岭脶戕 篚篝揿狒矧 尻酏瘗箸"
+msgid "Receiving Speed:"
+msgstr "葬鼾翮翎 宿:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr "CUPS CUPS 茧 Printerdrake CUPS 孱躔珩弭玺掾 孱躔珩弭玺掾."
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "娃箫 燥牝 赆 梳狸矧"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "梳磔磲"
+msgid "permissions"
+msgstr "溟赆辋灬翎"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "旭桢麸 孱躔珩弭玺蒡 CUPS: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(箦 狨酎 麸 扃鬈礴灬)"
+msgid "<- Previous"
+msgstr "<- 旭镧泔屙"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "旭矬狁祜箪蓓 妖桁轶"
+msgid "Internet Connection Sharing configuration"
+msgstr "妖桁轶 曙轫掾 簖礓弩珧 拈徜殛酏秕"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "曙轫耒篝镩 尻趱瘗糨 篝秕 躔镫镢轶糨/溥牯踽: "
+msgid "Toggle between flat and group sorted"
+msgstr "彭犭脶戕 戾翎铨 屦唣邃珧 赆 镬徜殛掾 翎铋睃扃箸"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "埋暹翦 狨酎灬翎 溟徼蒹殪秕 尻趱瘗糨 箦 狃镬彡聃箪蓓 扃麽磙灬翎"
+msgid "Themes"
+msgstr "容灬翎"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-"祥 尻趱瘗糨 箦 狨酎 麸 扃鬈礴灬 暹磲 溟徼蒹殪镩 箦 茈腼躜 躔镫镢轶糨"
+msgid "Options: %s"
+msgstr "硼殡镢蒡: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"硼唧珧 邃 祓锺暹翦 磲 锺唧弭 犴 镩 尻趱瘗糨 痫 怦唧觑眙衢 箦 "
-"狃镬彡聃箪蓓 扃麽磙灬翎 栳 暹磲 狨酎灬翎 溟徼蒹殪镩 赆 箦 狨酎 麸 "
-"扃鬈礴灬."
+"遵珞殪镳镩暹翦 麸 %s  瘃襻祆 尻赀礴箸.\n"
+"受眙 觌殛 篝 妖桁轶 汩 磲 铄觊磙箦翦 麸 镤玢 邈赆糗篝狍珧."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"配 祓锺暹翦 磲 屦殡蓊弭 犴 镩 篚礓屐蓓镩 尻趱瘗糨 狨麸 麸 扃麽磙灬麸 栳 "
-"暹磲 瘃矬廛箝祜 狃 狃镬彡聃箪蓓 扃麽磙灬翎 赆 狃 痫獒."
+msgid "OKI winprinter configuration"
+msgstr "氧桁唧彘 OKI winprinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "氧桁唧彘 觑轫掾 黢摅珧 尻趱瘗酤 CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "娃箫 零哚 烹蓓珧"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗糨 (燥痖觑, TCP/Socket, 赆 尻趱瘗糨 SMB)"
+msgid "Security Level"
+msgstr "硼唣邃 馏鲠脲哚"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"体耖贶 廪灬翎 溴 镫镪腌颃桤赆.\n"
"\n"
-"抨趱瘗糨 痫 暹磲 篚礓屐蓓镩 箦 狃镬彡聃箪蓓秕 孱躔珩弭玺蒡 CUPS 溴 "
-"黢彘苕弭衢 磲 聃桁轶麸 邃, 栳 犴轺礤蹊稞 狨酎灬翎."
+"容脲翦 筮泔躐 磲 邈赆翎脲啉弭 酤襻;"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "玄 暹磲 篚礓邃屐蓓矧 尻趱瘗艮 筢;"
+msgid "Sudan"
+msgstr "语蹁茼"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "择矧 簖礓弩珧 尻趱瘗艮"
+msgid "Polish (qwertz layout)"
+msgstr "酗膣黹挈 (溟荇犷 qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"\n"
-"\n"
-" 黢摅翮."
+msgid "Syria"
+msgstr "吁襁"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (val)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
+"\n"
+"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
+"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
+"\n"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "犴 锺轶翦 磲, 蓦邈黠 汩 瘃矬柁赙/狯徇皴箸 狁麇啭 sgid."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "犴 锺轶翦 磲, 蓦邈黠 汩 犴镩黥蒡 椠皴."
-
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"犴 磲, 狃矬麸朕 翮 犴狯锺茯 翎黪漶镬暹秕 箦 狨艮 翮 溟妪桴眢 犭腴 "
-"篝镯 root."
+msgid "Portuguese"
+msgstr "酗耵镢犭殛"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "犴 锺轶翦 磲, 狃雉蓦弩灬 犴狯锺茯 咫葶黠 燧簌 翎黪漶镬暹秕."
+msgid "Loopback file name: "
+msgstr "柬镬 狁麇唢 loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "犴 锺轶翦 磲, 蓦邈黠 豉 狁麇啭/赆翎朦泫 汩 邈泷狯 狃 秕."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr " IP 溟妪桴眢 DNS 瘃蒺彘 磲 暹磲 翮 祜聆掾 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "犴 锺轶翦 磲, 狃雉蓦弩灬 犴狯锺茯 咫葶黠 篝 tty"
+msgid "Serbia"
+msgstr "渝疋哚"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "犴 锺轶翦 磲, 蓦邈黠 翮 廛箸 溴滹燧睐 rpm."
+msgid "Newzealand"
+msgstr "洼 歧脶礓哚"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgid "This directory should remain within the root filesystem"
msgstr ""
-"犴 锺轶翦 磲, 蓦邈黠 豉 篚箨艴 溟牯 汩 徜檐犟轸 赆糗篝狍 "
-"脲轸秕胥哚."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "犴 锺轶翦 磲, 尻糨脲箸 咫葶鼯 chkrootkit"
+"刘酎 赆糗腼泔 瘃蒺彘 磲 疳襻戾唔彘 篝 耖骈挈 簖篝珈 狁麇啭 (root)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"犴 锺轶翦 磲, 蓦邈黠 溟赆轾燔豉 豉 狁麇啭 篝镯 狁鏖挈 赆糗腼泔 黢摅翮."
+msgid "CapsLock key"
+msgstr "须揸赳 Capslock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "犴 锺轶翦 磲, 蓦邈黠 汩 瘃镨蒹彘/狯衢褫箦轵 狁麇啭 suid root."
+msgid "Install bootloader"
+msgstr "旭襻祆 尻赀礴箸"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "犴 锺轶翦 磲, 狃雉蓦弩灬 犴狯锺茯 咫葶黠 篝 syslog."
+msgid "Select the memory size of your graphics card"
+msgstr "硼殡蓊翦 麸 燧沐栾 祉揿珧 翮 贶耵狎 泷狯殛"
-#: ../../security/help.pm:1
-#, c-format
+#: ../../standalone.pm:1
+#, fuzzy, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"犴 锺轶翦 磲, 蓦邈黠 汩 赍盹 犍溟觑 瘃忉箸, 汩 赆磔磲 犍溟挈 "
-"瘃忉箸 篝 /etc/shadow 赆 汩 黢摅翦 戾 id 0 尻酎 狃 麸 root."
+"\n"
+" 倪牯躏 拈徜哧趱颸n"
+"\n"
+" 孱' 锺轶祜齖n"
+"\n"
+"\n"
+" 戾糗 膺狎 戾糗 膺狎\n"
+"\n"
+"."
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "犴 锺轶翦 磲, 尻糨脲箸 咫葶鼯 狍鲠脲哚 赆桤戾耖碥."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Dynamic IP Address Pool:"
+msgstr "拈妪桴眢:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "犴 锺轶翦 磲, 屦犭掼艴箸 checksum 汩 翎 狁麇哚 suid/sgid."
+msgid "LVM name?"
+msgstr "镬 LVM;"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "犴 锺轶翦 磲, 蓦邈黠 赍睨 犍溟掰 瘃忉箸 篝 /etc/shadow."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "像轶燧礤 篚箨艴蒡 篝 綮揿 蹼殛稞 \"%s\" 狯衢褫桤赆:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "犴 锺轶翦 磲, 犴狯锺 茔睐篝 狁麇啭."
+msgid "Found %s %s interfaces"
+msgstr "埋蓁珀犴 %s %s 瘃矬狁祜沐唑"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Post Install"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "The internal domain name"
+msgstr "燥 弩羼殛 镬 麸燧"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ 贶耵狎"
#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
-"Arguments: (name)\n"
+"Arguments: (umask)\n"
"\n"
-"Add the name as an exception to the handling of password aging by msec."
+"Set the user umask."
msgstr ""
"\n"
"\n"
-" 旭矬柁赙."
+" 黢摅翮."
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"\n"
-"\n"
-" 黢摅翮 屦唣邃."
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
+#, c-format
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
"\n"
"\n"
-" 赆桤戾耖碥."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-"Use password to authenticate users."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
"\n"
"\n"
-" 响茕 羼汜筮狎: 黢摅翮."
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+" 赆磔磲\n"
"\n"
"\n"
-" 獒哚."
+"."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "硼殡蓊翦 镤玢 溟箨蒴狎 汩 溏扉秕胥哚 溟箨蒴狎 尻赀礴箸"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO 戾 戾盹 赍殪蓓秕"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" 篚箨艴."
+msgid "Everything (no firewall)"
+msgstr "茧弪 (鼯襁 麸喵矧 瘃矬翎筮狎)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-" 孱躔珩弭玺掾<SERVER_LEVEL> 孱躔珩弭玺掾\n"
-"\n"
-"."
+msgid "You must specify a kernel image"
+msgstr "旭蒺彘 磲 锺唧弭 扉 彘挈磲 瘐褶磲"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" 赆磔磲\n"
-"."
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", multi-function device on USB"
+msgstr ", 痫膈黢珞糸贽 篚箨艴 篝珥 USB"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾."
+#: ../../interactive/newt.pm:1
+#, c-format
+msgid "Do"
+msgstr "受眙"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"\n"
-"\n"
-" 想镪腌颃桤赍\n"
-"\n"
-"."
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "育礓弩 戾 麸 酎痫 汩 翮 朕 豉 溟徼蒹殪 疳贻豉..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "碎栾踽黹挈 AZERTY (疳腴)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "埋徭殡檐黹觑 (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "IP address of host/network:"
+msgstr "拈妪桴眢 IP 麸 躔镫镢轶艮/溟牯:"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"\n"
-"\n"
-" 黢摅翮."
+"篚眙弭徙燧礴 y 翮 泷犰燹 瘃稂滹鮘n"
+"狃 翮 屦茼 狁轶翦褶 泫磉"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "System installation"
+msgstr "陪赆糗篝狍"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "躲轱 麻贻眙轱 赆 民屙犴暨礤"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"\n"
-"\n"
-" 琉镤秣 恶礴箸."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Open"
+msgstr "/榴麇唢/禵盹殂灬"
#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
"\n"
"\n"
-" 琉镤秣 恶礴箸."
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"\n"
-"\n"
-" 琉镤秣 恶礴箸."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "拈狩彘耖篝掾 馏鲠脲哚 (瘃矬疠脶箸 翎黪漶镬暹)"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
+" 孱躔珩弭玺掾."
-#: ../../security/level.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "遵摅 libsafe 汩 溟彡镬轶糨"
+msgid "Location of auto_install.cfg file"
+msgstr "容箸 麸 狁麇唢 auto_install.cfg"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Security level"
-msgstr "硼唣邃 狍鲠脲哚"
+msgid "Open Firmware Delay"
+msgstr "俄镩沆 梳桴篝蓠珞珧 Firmware"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "硼殡蓊翦 麸 屦殍蹯玺 屦唣邃 狍鲠脲哚"
+msgid "Hungary"
+msgstr "硝沣狁哚"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "箩箝贻 硼殡镢蒡 DrakSec"
+msgid "Total progess"
+msgstr "吁盹腴贽 瘃滹"
-#: ../../security/level.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-" 狍鲕脲獒 暹磲 咪獒 麸 瘃镧泔屙秕 屦轲蒌秕, 戾 麸 簖篝珈 翦脲啭 "
-"觌彘篝. 狍鲕脲獒 暹磲 篝 燧汩篝 漉磲酎."
+msgid "Color configuration"
+msgstr "妖桁轶 黢荇"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"体 狨酎 麸 屦唣邃 狍鲠脲哚 暹磲 漉磲艮 黢摅 麸 篚篝揿狒矧 篝  "
-"孱躔珩弭玺.\n"
-" 狍鲕脲獒 暹磲 狁赍糗 貘珉 翦 磲 漭麇翎 翎豸耧礤 篚礓蒹彘 狃 "
-"痫腚稞 疱胲翦.\n"
-"隅: 另 麸 扃鬈礴灬 暹磲 禳盹 汩 翮 黢摅  疱胲翮 篝 拈徜哧趱 酎翦 "
-"赆臊翦襻 磲 屦殡蓊弭 麽扃朦翦耧 屦唣邃 狍鲕脲獒"
+msgid "New Zealand"
+msgstr "洼 歧脶礓哚"
#: ../../security/level.pm:1
#, c-format
@@ -13218,858 +12766,713 @@ msgstr ""
"震荞黠蹴 掬 贶痫轱 疱耖锺轶祜, 赆 疱耖篌羼镩 蓦邈黠 尻翦腼翎 贶桢 "
"怦茕."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"刘酎 暹磲 麸 篚礴栝箪蓓 屦唣邃 狍鲠脲哚 汩 蓓 簖篝珈 痫 栳 篚礓彖暹 "
-" 疱胲翮 篝 拈徜哧趱."
+msgid "please choose the date to restore"
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 珈羼镬珥哚 屦犴狯锺茯"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Switching from ext2 to ext3"
+msgstr "岭脶戕 狃 ext2 箦 ext3"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "想脶礓殛蒡 另暨腚弪"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Browse to new restore repository."
+msgstr "犴徭摁珞 磔."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"轧襻 躔荞黠蹴 犍溟觑 瘃忉箸, 犭胲 黢摅 麸 篚篝揿狒矧 箦 溥牯躏 彡 "
-"溴 篚磉篝狒衢."
+"\n"
+"梳膻 锺唧狒 篝镯 箱玢 妖桁轶珧 抨趱瘗艮\n"
+"\n"
+" 镤玢 狨酎 筢 怙玷苠 篝珥 邈赆糗篝狍 麸痖掰 狃镬彡聃箪蓓 "
+"尻趱瘗酤 痫 栳 黢珞殪镳镩玷稞 箦 狨酎 赆 箦 茈脶 扃麽磙灬翎 篝 溥牯躏\n"
+"\n"
+"俞 骁糗 弪 糸 狃狁徇翮翦 痣珩秭锺咤 汩 磲 聃桁唧弭 麸躜 尻趱瘗糨 "
+"赆 磲 狃镪艮箦翦 瘃忉箸 箦 秕 麸躜 溟徼蒹殪秕 镤玢稞 尻趱瘗酤, "
+"屦殡镢蒡 豉 镤玢 赆 麸躜 酏痫躜 篚礓蒹妁."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and %d unknown printers"
+msgstr "赆 %d 茔睐篝镩 尻趱瘗糨"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"刘酎 麸 屦唣邃 瘃蒺彘 磲 黢珞殪镳镩玷暹 戾 瘃矬秣. 受礤 麸 簖篝珈 筢騖n"
-"痖 妪黢珞麸, 犭胲 痫臊 艴徇箬玺. 腻 瘃蒺彘 磲 黢珞殪镳镩玷暹 箦 簖篝珈醆n"
-"篚礓邃屐蓓 篝 拈徜哧趱 LAN. 腻 躔荞黠蹴 犍溟觑 瘃忉箸."
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "嗅襻盹"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "腻 怦蓁珀 贶耵 ISDN. 嗅襻赆膻 屦殡蓊翦 扉 狃 翮 疳襻贶豉 镨."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "狰珉羼"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "狰珉"
+msgid "Please give a user name"
+msgstr "嗅襻赆膻 彘筌沐翦 镬 黢摅翮"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "拄"
+msgid "Enable CD Boot?"
+msgstr "彭羼泔痫哏箸 尻赀礴箸 狃 CD;"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "梳膻 锺唧狒 篝秕 Crackers"
+msgid " enter `void' for void entry"
+msgstr "彘筌沐翦 翮 胼铉 `void' 汩 赍磙 彘筢泫戕"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "嗅襻赆膻 屦犴狍蹴溴桢唪  %s 汩 屙羼泔痫哏箸 豉 犭脶泾"
+msgid "on Hard Drive"
+msgstr "篝镯 雨腌顸 倪箨"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "嗅襻赆膻 狃矬蹴溴桢唪 赆 戾糗 疳艮篝 Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "育礓弩 Winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"麸 /etc/hosts.allow 赆 /etc/hosts.deny 蓣秕 掬 聃桁轶翦 - 溴 "
-"戾翎赳莛珀犴"
+"\n"
+"吁泖狁玺揆獒, 尻趱瘗艮 筢 邈赆翎篝荑珀 赆 聃桁唧翮赍!\n"
+"\n"
+"甜锺暹翦 酤襻 磲 尻趱瘙箦翦 戾 翮 屙麸朕 \"抨酏瘗箸\" 翮 弼狁祜戕 筢 "
+"(篚磙棂 贶豉 狃 麸 戾盹 \"榴麇唢\").\n"
+"\n"
+"另 栎脲翦 磲 瘃矬栎箦翦, 磲 狯衢褫箦翦 磲 戾麸盹燔箦翦 麸 尻趱瘗艮 筢 "
+"犴 栎脲翦 磲 犭胲铄翦 糸 瘃镥痖脲沆蓓弪 聃桁唧彘 筢 (栎箸 麸 麽耵轱, "
+"痫辄翮翎 尻酏瘗箸) 屦殡蓊翦 \"抨趱瘗艮騖" 篝 綮揿 \"针殛黒"麸 瘦眙耧 "
+"烹葶黠 Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "旭蒺彘 磲 溏扉秕胥摅 瘃 麸 /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "受糸 溴 疝沐 赆胲! 胚磲 麸 mkisofs 邈赆翦篝珈蓓;"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "轧襻 祓锺暹翦 磲 尻翦胼箦翦 麸 xawtv (燧筢 狃 翎 Window!) !\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr " 彘挈磲 Etherboot ISO 暹磲 %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"腻 躔荞麇 狁赍酎 齄耧 swap 汩 翮 镫镪朕聩箸 翮 邈赆糗篝狍珧, 疳襻赆膻 "
+"瘃矬栎篝"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "No floppy drive available!"
-msgstr "腻 躔荞麇 溟徼蒹殪矧 镤玢 溟箨蒴狎!"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "%s (三襻 %s)"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "轧襻 祓锺暹翦 磲 狯衢褫篝 翮 溟箨蒴"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"Linux\n"
+"\n"
+"\n"
+" HardDrake Linux\n"
+"\n"
+" 燥燧狎 Windows \n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾 拈徜哧趱颸n"
+" 拈徜哧趱颸n"
+" 孱躔珩弭玺掾\n"
+" 孱躔珩弭玺掾."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "腻 暹磲 漉磲艮 瘃忉箸 篝 溟箨蒴!"
+msgid "Which is your timezone?"
+msgstr "酗獒 暹磲 纩礴 狎;"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "嗅襻赆膻 彘筌沐翦 溟箨蒴 抨赀礴箸:"
+msgid "Guinea"
+msgstr "蔑蹰磔"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "陪泷狯 妖桁轶珧"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "拈妪桴眢:"
+msgid "The system is now connected to the Internet."
+msgstr "燥 簖篝珈 暹磲 酤襻 篚礓屐蓓 篝 拈徜哧趱."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"祥 疱耖篌羼弪 糸燧 蓣秕 孱狩桢 \n"
-"狃 麸 簖篝珈 筢騖n"
-"岭胲铘 糸 犴 黢彘苕弭衢."
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "忘糸 缅氵 赆 忘糸 顽箝 榆眙秕轸"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "氧桁唧彘 蓬躔珩弭玺 dhcpd"
+msgid "Japan (broadcast)"
+msgstr "舍瘗磉 (屙彷耖)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "捡轱 藻耢狒轶祜 IP:"
+msgid "Mozambique"
+msgstr "田驷焘哧"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr "捡轱 抨赀礴箸 裳:"
+msgid "Icon"
+msgstr "砰觑磉溟"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name Servers:"
-msgstr "柬镬 蓬躔珩弭玺:"
+msgid "Please choose what you want to backup"
+msgstr "嗅襻赆膻 屦殡蓊翦 糸 栎脲翦 磲 疖皴翦 箦 犴暨泷狯 狍鲠脲哚"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "柬镬 燥燧:"
+msgid "256 colors (8 bits)"
+msgstr "256 黢狒 (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "拈妪桴眢 体糗滹箸:"
+msgid "Read-write"
+msgstr "Read-write"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Size: %s\n"
+msgstr "梯沐栾: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Routers:"
-msgstr "鸟镬镫镢玺蒡:"
+msgid "Hostname: "
+msgstr "柬镬 篚篝揿狒矧: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask:"
-msgstr "誊箨 溟牯:"
+msgid "Chunk size %s\n"
+msgstr "梯沐栾 chunk %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Subnet:"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Local Printer"
+msgstr "燥痖挈 抨趱瘗艮"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"旭蒺彘 磲 尻觊礴桢 钺碥 拈狩彘耖篝掾 旭镡镫掾 汩 磲 轶鼾箫蹴 弪 镩 "
-"犭脶爿. \n"
-"(狃 翮 觑眢 - service dm restart)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "妖桁轶 dhcpd..."
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "拈徙襻鲛 绣胲翮"
+msgid "ADSL connection"
+msgstr "育礓弩 ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- 硼孱羼汜筮 绣胲翮"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "梳爝 颀桁轶, 贶眙 觌殛 篝镯 箱玢 篝 旭秣珈蓓.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Add Client -->"
-msgstr "旭矬柁赙 绣胲翮 -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "旭矬柁赙/瘤徇皴箸 绣脶酤"
+msgid "Error!"
+msgstr "遇茈灬!"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "绣胲翮 DHCP"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "cable connection detected"
+msgstr "犴轺礤珀 赆膣溟彡 簖礓弩"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "腻 溏扉秕胥掼珀犴 彘挈礤 尻赀礴箸 溟牯!"
+msgid "Permission denied transferring %s to %s"
+msgstr "恶礴箸 瘃忉箸 赆糗 翮 戾翎鲲褴 麸 %s 篝 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "酏痫: %s"
+msgid "/_Report Bug"
+msgstr "/_另狯锺 Bug"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- 拈徙襻鲛 遵摅翮"
+msgid "Resize"
+msgstr "岭脶戕 戾爿栾躜"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "旭矬柁赙 黢摅翮 -->"
+msgid "Dominica"
+msgstr "汪镬唔殛"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the device name to use for backup"
msgstr ""
-"\n"
-" 蓬躔珩弭玺掾\n"
-" 拈徙襻鲛 黢摅翮 蓬躔珩弭玺掾 屙羼泔痫哏箸."
+"嗅襻赆膻 彘筌沐翎 麸 镬 篚箨艴掾 汩 翮 黢摅 豉 犴糸泷荟 狍鲠脲哚"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "拈徙襻鲛 茧 豉 NBIs"
+msgid "Resolution: %s\n"
+msgstr "另茈躞: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- 拈徙襻鲛"
+msgid "matching"
+msgstr "翎轳檐驽"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "刘酎 栳 溟狁贻箦 戾耖贶 脲痿."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"龄蹴犰哚 瘃忉箸 豉 狁桉荇 痫 犴糸篝镩黠 篝镯 瘐褶磲 筢 (麸 "
+"狁麇唢 %s 脲唣彘), 沐黹贶 狨酎 箸灬唔彘  溟箨蒴 尻赀礴箸 溴 暹磲 箦 "
+"篚泖耧黹箪 戾 麸 梯箫 邈赆糗篝狍珧 ( 疳襻赆膻 溏扉秕胥摅翦 扉 磔 溟箨蒴 "
+"尻赀礴箸)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Build All Kernels -->"
-msgstr "茧"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 翮 赆糗腚珉 椠襻. 瞄 疳褴溴殂灬,\n"
+"鏫"COM1\" 篝 Windows 镯镬苕弭衢 \"ttyS0\" 篝 GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "腻 屦殡蓣翮赍 NIC!"
+msgid "The following packages are going to be removed"
+msgstr "柔 狯衢皴栾 翎 疳襻贶豉 疳贻翎 "
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "溺扉秕胥哚 田盹 NIC -->"
+msgid "Connect to the Internet"
+msgstr "育礓弩 篝 拈徜哧趱"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "腻 屦殡蓣翮赍 瘐褶磲!"
+msgid "Use existing partitions"
+msgstr "遵摅 躔狁黠躞 赆翎綮摅妁"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "溺扉秕胥哚 想腌耧 絮褶磲 -->"
+msgid "Canadian (Quebec)"
+msgstr "梳磲溟挈 (叔祓蓐)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "抨赀礴箸 ISO"
+msgid "Mouse device: %s\n"
+msgstr "吁箨艴 痫眙殛轱: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "拈箨蒴 抨赀礴箸"
+msgid "Reselect correct fonts"
+msgstr "吾磲屦殡蓊翦 糸 簌篝蒡 泷犰灬麸箦轳蒡"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
"\n"
"\n"
-" 溺扉秕胥哚 Root\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
"\n"
" 孱躔珩弭玺掾\n"
"\n"
-" 育篝珈醆n"
-" 屙羼泔痫哏箸\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 狃屙羼泔痫哏箸\n"
-"\n"
-"\n"
-"\n"
-" 黢摅翮騖n"
-" 孱躔珩弭玺掾\n"
" 孱躔珩弭玺掾\n"
-"\n"
-"\n"
-" 孱' 锺轶祜 狃屙羼泔痫哏箸\n"
-" 栎箸\n"
-"\n"
-"\n"
-" 溺扉秕胥哚\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
"\n"
"\n"
-" 捧麽耖篝稞戾:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" 槛閈n"
+" 孱躔珩弭玺掾\n"
+"."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "轧襻 栳 聃桁唧秕戾 翮 %s 簖礓弩."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "旭矬柁赙/瘤徇皴箸 绣脶酤"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "旭矬柁赙/瘤徇皴箸 遵珞酤"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "溴 怦蓁珀 赆爝 泷犰灬麸箦轳躙n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "砰挈礤 Net Boot"
+msgid "Language"
+msgstr "硼殡蓊翦 汶筢"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "硼殡镢 祜眙蓦秕 尻趱瘗艮"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "藻耢狒轶禳 蓬躔珩弭玺"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"体糗 翮 犭脶戕 酏痫 篝珥 赆糗綮珞 %s,  翎 溴滹燧磲 箦 狨艮 翮 "
+"赆糗綮珞 栳 麽栾"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "抨赀礴箸 蓬躔珩弭玺掾"
+msgid "%d seconds"
+msgstr "%d 溴豸羼屦翎"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "琉屙羼泔痫哏箸 蓬躔珩弭玺"
+msgid "Insert a blank floppy in drive %s"
+msgstr "砰筌沐翦 茕彘 溟箨蒴 篝镯 镤玢 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "彭羼泔痫哏箸 蓬躔珩弭玺"
+msgid "A valid URI must be entered!"
+msgstr "疙 簌篝 URI 瘃蒺彘 磲 彘筢麒暹!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "妖桁轶 麸 拈彡镬轶艮 藻耢狒殛稞 Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "埋蓁珀 扉 溟屦狯 \"%s\" 栎脲翦 磲 翮 黢珞殪镳镩摅弭 ;"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "瘤徇皴箸 麸 翦脲豸徇秕 篝镩麇唢"
+msgid "Re-configure interface and DHCP server"
+msgstr "硼犴狁扉箸 溟屦狯掾 赆 麸 孱躔珩弭玺 DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "旭矬柁赙 篝镩麇唢"
+msgid "Sound configuration"
+msgstr "妖桁轶 搠秕"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "刘酎灬翮 邈赆糗篝狍"
+msgid "Photo test page"
+msgstr "娘觊灬篝殛 箦脒溽 鳄麸泷狯哚"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-" 溟箨蒴 溏扉秕胥掼珀 戾 屦轸貅哚.\n"
-"甜锺暹翦 酤襻 磲 屦犴犭茆弭 翮 邈赆糗篝狍."
+msgid "Custom disk partitioning"
+msgstr "旭矬狁祜箪蓓弪 赆翎綮摅彘 溥箨秕"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "吁泖狁玺揆獒!"
+msgid "Enter Printer Name and Comments"
+msgstr "砰筌沐翦 柬镬 抨趱瘗艮 赆 喻獒"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"祥 疳襻贶豉 尻趱瘗糨騖n"
"\n"
-" 梳膻 像唧狒錦n"
-"\n"
-"祥 疳褴戾赳镩 汩 翮 狨酎灬翮 邈赆糗篝狍 躔荞黠蹴 篝 綮揿狒 狁轶翦褴"
+"%s%s\n"
+"暹磲 莒弩 篚礓屐蓓镩 篝 簖篝珈 筢"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧"
+msgid "type: %s"
+msgstr "酏痫: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "麇轳镪唔玺"
+msgid "Slovakian (QWERTY)"
+msgstr "与镡彡哚 (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"嗅襻赆膻 赆栾襁篝 遘 汩 贶桢 廪灬 栳 氵礤 屦犴茈瑛 翮 邈赆糗篝狍珧, "
-"遘 氵礤 麇轳镪唔玺"
+msgid "No Sound Card detected!"
+msgstr "腻 怦蓁珀 受耵 棍秕!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "妖桁轶 刘酎灬豉 络燔豉"
+msgid "Mouse Port"
+msgstr "三襻 痫眙殛轱"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "屦犴茈瑛"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"陪赆糗篝狍鏫n"
-"\n"
-" 硼犴狯豉箸\n"
-"\n"
-"\n"
-"\n"
-" 想镪腌颃桤赍?"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "氧桁唧彘 狨酎灬翮 邈赆糗篝狍珧"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "腻 祓锺 磲 怦 麸 狃狁徇翮麸 狁麇唢 彘挈磲 `%s'."
+"旭蒺彘 磲 尻觊礴桢 钺碥 拈狩彘耖篝掾 旭镡镫掾 汩 磲 轶鼾箫蹴 弪 镩 "
+"犭脶爿. \n"
+"(狃 翮 觑眢 - service dm restart)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Error!"
-msgstr "遇茈灬!"
+msgid "Ftp Server"
+msgstr "拈彡镬轶艮 Ftp"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Enable/Disable msec hourly security check."
msgstr ""
"\n"
-" 硼犴狯锺躙n"
"\n"
-" Drakbackup\n"
-"\n"
-" Drakbackup\n"
-"\n"
-" 箸灬眙殛黒n"
+" 獒哚."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "戾翎赳镳 泷犰灬麸箦轳 pfm"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr " 酏痫 翮 椠襻 篝珥 镳镞 暹磲 篚礓邃屐蓓 麸 痫眙哧 筢."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Uganda"
+msgstr "硝汴茼翎"
+
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+"Arguments: (size)\n"
"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-"\n"
-" 孱躔珩弭玺掾\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-msgstr ""
-"绣耖泷狯轡n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-" Drakbackup\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" 育篝珈醆n"
-" 遵摅翦騖n"
-" 峨腼\n"
-" 茧 峨腼 燥燧狎 Windows \n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" CDROM\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
-" Drakbackup\n"
-" 黢摅翮騖n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
-" 孱' 锺轶祜齖n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "曙禳皴"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
"\n"
-" 妖桁轶鏫n"
"\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" 硼犴狯锺躙n"
"\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
"\n"
+"轧襻 栳 聃桁唧秕戾 翮 %s 簖礓弩.\n"
"\n"
"\n"
+"嗅艮篝 麸 OK 汩 磲 铄觊磙箦翦"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "隋轸秕胥哚 Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (赆膣溟彡)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-"犴徕徼爝箦轵 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"龄蹴犰哚 屦犴尻赀礴箸 麸 LiLo!\n"
+"抨翦胼篝 \"lilo\"  root 篝珥 泷犰燹 屙麸膻 汩 磲 镫镪腌聩桢 "
+"邈赆糗篝狍 麸 栎灬麸 LiLo"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "缅黹觑 酏痫 戾 3 痣揸赳"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+msgid "Select another media to restore from"
+msgstr "硼殡蓊翦 茈腼 燧箫 汩 翮 犴荜翮箸"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "拈狩彘耖篝掾 孙汩箪殛稞"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14081,82 +13484,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 黢摅翮騖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"\n"
@@ -14164,20 +13504,7 @@ msgstr ""
"\n"
"\n"
"\n"
-"\n"
-"\n"
-"\n"
-" 响茕 羼汜筮狎:\n"
-"\n"
-"\n"
-" 遵摅翮騖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 峨腼\n"
+" 黢摅翮騖n"
"\n"
"\n"
"\n"
@@ -14196,4904 +13523,5649 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
+msgid "Re-submit"
+msgstr "砰筌沐翦 钺碥"
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-" Drakbackup\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 孱' 锺轶祜齖n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Drakbackup\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
+#, c-format
+msgid "CD in place - continue."
+msgstr "燥 CD 暹磲 篝 栎箸 麸 - 篚磔麇獒"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "硼犴狯锺"
+msgid "Network & Internet"
+msgstr "倪牯躏 & 拈徜哧趱"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "另暨泷狯 狍鲠脲哚 轧襻"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "碎栾踽黹挈 \"鳄礴糸挈\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "旭秣珈蓓弪 氧桁唧彘"
+msgid "Net Boot Images"
+msgstr "砰挈礤 Net Boot"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "氧桁唧彘 箱玢稞"
+msgid "Sharing of local scanners"
+msgstr "曙轫 黢摅 麸痖掰 筢聩酤"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "旭镡镫 氧桁唧妁 另糸泷荟 馏鲠脲哚"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "溺扉秕胥哚 另糸泷荟 馏鲠脲哚 狃 麸 狁麇唢 聃桁唧妁"
+msgid "Services and deamons"
+msgstr "震珩弩咤 赆 溽哽镯弪"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "氧桁唧彘 Drakbackup"
+msgid "Remote host name missing!"
+msgstr "燥 狃镬彡聃箪蓓 溟牯踽挈 镬 脲唣彘!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "吁盹腴贽 旭滹"
+msgid "with /usr"
+msgstr "戾 /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "琉矬麸朕 狁麇啭..."
+msgid "Network"
+msgstr "倪牯躏"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "狃矬麸朕 狁麇啭 燧簌 FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"刘酎灬翮 犴喵礤躞 尻趱瘗酤 篚礓屐蓓镩 箦 扃麽磙灬翎 痫 蓣秕 Microsoft "
+"Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "另暨泷狯 狍鲠脲哚 茈膣 狁麇啭"
+msgid "This password is too simple"
+msgstr " 犍溟挈 瘃忉箸 暹磲 痫臊 狃朦"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "另暨泷狯 狍鲠脲哚 狁麇啭 黢珞酤"
+msgid "Slovakian (QWERTZ)"
+msgstr "与镡彡哚 (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "另暨泷狯 狍鲠脲哚 麸 篚篝揿狒矧 狁麇啭"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "震 另莛趱铉 ... 疳襻赆膻 疱耖燧礤翦."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "旭徙灬糸贶 咫荀轶翮 邈赆糗篝狍 (彘溟贶 鼯襁 urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"腻 怦蓁珀 颀桁轶鏫n"
-"疳襻赆膻 贶眙 觌殛 篝 箱玢 篝 旭秣珈蓓."
+" 体翎鲲褴 \n"
+"轧襻"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "嗅襻赆膻 屦殡蓊翦 翎 狁麇哚 痫 栳 氵盹蹴 犴暨泷狯 狍鲠脲哚"
+msgid "Use daemon"
+msgstr "遵摅 溽哽镯"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "嗅襻赆膻 屦殡蓊翦 麸 燧箫 汩 翎 犴暨泷狯 狍鲠脲哚..."
+msgid "Authentication"
+msgstr "虚篝镳镞珞"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "嗅襻赆膻 屦殡蓊翦 翎 溴滹燧磲 瘃矧 屦犴狯锺..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "旭矬柁赙 狨麸 麸 尻趱瘗艮 篝 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "葬 疳襻贶豉 疳贻翎 瘃蒺彘 磲 邈赆翎篝徼稞:\n"
+msgid "Additional CUPS servers: "
+msgstr "旭桢麸 孱躔珩弭玺蒡 CUPS: "
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"遇茈灬 赆糗 翮 狃矬麸朕 狁麇唢 燧簌 FTP.\n"
-"嗅襻赆膻 溟锺棹篝 翮 颀桁轶 麸 FTP."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr "犴轺礤珀 孱' 锺轶祜."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "酗 栎脲翦 磲 篚礓蒹弭 麸 %s;"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "硼犴狯锺 燧簌 溟牯"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "岭沐襁"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "燧沐栾 Initrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"遇茈灬 篝 sendmail\n"
-" 犴狯锺 溴 篝茈桤赍\n"
-" 疳襻赆膻 聃桁唧翦 麸 sendmail"
+"\n"
+" 孱躔珩弭玺掾\n"
+"."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "硼屙"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\t另暨泷狯 馏鲠脲哚  tar 赆 gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "旭镧泔屙"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "琉镨揸艴箸"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "溺扉秕胥哚 犴糸泷荟 狍鲠脲哚"
+msgid "Setting Default Printer..."
+msgstr "像轶禳 旭镥痖脲沆蓓秕 抨趱瘗艮..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "旭滹 另荜翮箸"
+msgid "Interface %s (using module %s)"
+msgstr "拈屦狯 %s (黢摅 狁桉狒矧 %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "硼犴狯锺 狃 梳糗腼泔"
+msgid "Name: %s\n"
+msgstr "柬镬: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Browse to new restore repository."
-msgstr "犴徭摁珞 磔."
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Generating preview ..."
+msgstr "溺扉秕胥哚 瘃镥痖箨珞珧 ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "燥 CD 暹磲 篝 栎箸 麸 - 篚磔麇獒"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "旭矬狁祜箪蓓 硼犴狯锺"
+msgid "serial"
+msgstr "箦轳獒挈"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "硼犴狯锺  豉 犴糸泷荟 狍鲠脲哚"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr " 硼犴狯锺 琉蒴貅..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "缅氵 (\"酸糸黹贽\" 溟荇犷)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr " 容箸 麸 恶桉 狃衢翦唪衢"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"甜锺暹翦 酤襻 磲 濑箦翦 糸 疳襻燧赳秕 汩 麸 荞桉 %s.\n"
+"隅戾辋篝  贶桢 溟妪桴眢 瘃蒺彘 磲 彘筌沐翎 戾 麸 瘃屐 0x  "
+"'0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "狃衢翦唪衢 麸 溟牯踽挈 镬"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "琉衢翦唪衢 镬 黢摅翮"
+msgid "Kenya"
+msgstr "瘦眭"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "琉衢翦唪衢 犍溟挈 瘃忉箸"
+msgid "Use ``Unmount'' first"
+msgstr "受眙 瘃 ``琉矬溴箸''"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Host Path or Module"
-msgstr "育篝珈"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing mtools packages..."
+msgstr "陪赆糗篝狍 疳贻麸 mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "柬镬 吁篝揿狒矧"
+msgid "You must specify a root partition"
+msgstr "旭蒺彘 磲 锺唧弭 扉 赆糗綮珞 root"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "硼犴狯锺 梯簌 旭镫腼 拈牯: %s"
+msgid "first step creation"
+msgstr "瘃 廪灬 溏扉秕胥哚"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "硼犴狯锺 燧簌 溟牯"
+msgid "Both Shift keys simultaneously"
+msgstr "葬豸耧磲 翎 潺 痣揸赳 Shift"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Select a scanner model"
+msgstr "硼殡蓊翦 蓓 祜眙蓦 筢聩艮"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"\n"
-" 篚箨艴"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "硼犴狯锺 琉 葬轫哚"
+msgid "Drakbackup Configuration"
+msgstr "氧桁唧彘 Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "琉镨揸艴箸 衮.."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
+" 溟屦狯 溴 蓣彘 聃桁轶艮 彡. \n"
+"抨翦胼篝 麸 镤玢 颀桁轶珧 篝珥 牾襁 镨"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "硼犴狯锺 狃 CD"
+msgid "Korea (North)"
+msgstr "曙褫 (曼皴獒)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "葬 犴暨泷狯 狍鲠脲哚 溴 怦蓁珀犴 篝 %s."
+msgid "Autologin"
+msgstr "刘酎灬翮 簖礓弩"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"岭脶戕\n"
-"容箸 硼犴狯锺茯"
+msgid "System configuration"
+msgstr "妖桁轶 篚篝揿狒矧"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "戍溟挈 旭忉箸 拈狩彘耖篝 燥燧"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"硼犴狯锺 硼殡邈燧睐韁n"
-"榴麇啭"
+"燥 Mandrake Linux 9.1 筢 疳褫麇 11 溟狯锺弭殛 泷狯殛 疱耖廛腚镯翎 痫 "
+"祓锺稞 磲 戾翎赳狃稞 痣揆: KDE 3, Gnome 2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "氧桁哝弭衢 尻趱瘗艮 ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr "硼犴狯锺躙n"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "瘤徇皴箸 赆翎朦泫 黢珞酤 瘃轫 狃 翮 屦犴狯锺."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "想镪腌颃桤赍 磔"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "犴 锺轶翦 磲, 蓦邈黠 翮 廛箸 溴滹燧睐 rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "屦殡蓊翦 翮 栎箸 屦犴狯锺茯 (犴暨 麸 /)"
+msgid "Virgin Islands (British)"
+msgstr "嗅耔蓓镩 娃箫(埋弭犴殛蒡)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "硼犴狯锺 峨膣"
+msgid "Bermuda"
+msgstr "洛耢稞溴"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "硼犴狯锺 遵珞酤"
+msgid "click here if you are sure."
+msgstr "贶眙 觌殛 邃 犴 暹篝 廨忉轱"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "硼犴狯锺 篚篝揿狒矧"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"腻 怦蓁珀 颀桁轶鏫n"
+"疳襻赆膻 贶眙 觌殛 篝 箱玢 篝 旭秣珈蓓."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Linux 犴轺礤珀錦n"
+"\n"
+"\n"
+" 想镪腌颃桤赍\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+" 柬镬醆n"
+"\n"
+" 柬镬醆n"
+"\n"
+"\n"
+" IDE\n"
+"\n"
+"\n"
+" IDE\n"
+"\n"
+"\n"
+" 瘃妪秕筢 IDE\n"
+"\n"
+" 瘃妪秕筢 IDE\n"
+"\n"
+" 溴豸羼妪秕筢 IDE\n"
+"\n"
+" 溴豸羼妪秕筢 IDE\n"
+"\n"
+"\n"
+"."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Other Media"
-msgstr "峨脶 梯筢"
+msgid "Remove"
+msgstr "瘤徇皴箸"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "硼殡蓊翦 茈腼 燧箫 汩 翮 犴荜翮箸"
+msgid "Lesotho"
+msgstr "隋簏麸"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "嗅襻赆膻 彘筌沐翦 麸 赆糗腼泔 痫 怦唧觑眙衢 翎 犴暨泷狯 狍鲠脲哚"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "硼犴狯锺 狃 麸 箨腌顸 溥箨."
+msgid "Pipe job into a command"
+msgstr "拈狍揄 羼汜筮狎 箦 屙麸朕"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use quota for backup files."
-msgstr ""
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "溏扉秕胥掼珀 磔 漉磲扉贽 篚箨艴 狃 麸 赍眙耖挈 瘐褶磲 devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 麸 燧汩篝 燧沐栾騖n"
-"痫 屦轸褫疱翎 篝 Drakbackup"
+msgid "Yes"
+msgstr "歪"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "嗅襻赆膻 锺唧翦 麸 赆糗腼泔 狃镨揸艴箸: "
+msgid "Cote d'Ivoire"
+msgstr "陵艮 烹弼犴麸篝稞"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "遵摅 箨腌耧 溥箨秕 汩 翎 犴暨泷狯 狍鲠脲哚"
+msgid "Which protocol do you want to use?"
+msgstr "酗轱 瘃镫腼 栎脲翦 磲 黢珞殪镳镩摅弭;"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 珈羼镬珥哚 屦犴狯锺茯"
+msgid "Restore Progress"
+msgstr "旭滹 另荜翮箸"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "另暨泷狯 狍鲠脲哚 狁麇啭 篚篝揿狒矧 瘃轫 狃:"
+msgid "Estonia"
+msgstr "朋栾磉"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "黢摅翮"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr ""
+"硼殡蓊翦 麸 躔镫镢轶艮 麸 镳镞秕 镩 麸痖觑 筢聩糨 栳 氵盹蹴 溟徼蒹殪镩:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "彭糗铄 汩 翮 屦犴狯锺 豉 茈膣 狁麇啭."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"震荞麇 蓓 赍睃 篝镯 疬磲赆 赆翎綮摅妁 灬 溴 祓锺 磲 麸 黢珞殪镳镩摅.\n"
+" 祜磲溟贽 臊箸 暹磲 磲 戾翎觊磙箦翦 糸 瘃妪秕箦 赆翎綮摅彘 筢 蒴箝 "
+"翦 麸 赍睃 磲 怦彖暹 溥痣 篝珥 尻翦翎燧礴 赆糗綮珞"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " 氧桁唧彘 硼犴狯锺茯 "
+msgid "Channel"
+msgstr "梳碥腴"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " 另彡翮桢 戾 屦轸貅哚 篝 %s "
+msgid "Add"
+msgstr "旭矬柁赙"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " 茧 翎 屦殡邈燧磲 溴滹燧磲 蓣秕 "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr " 曙轫 育礓弩 拈徜殛酏秕 溴 蓣彘 聃桁轶翦 痫糨."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "葬 犴暨泷狯 狍鲠脲哚 暹磲 赆翦篝襻祆蓓"
+msgid " Error while sending mail. \n"
+msgstr "遇茈灬 赆糗 翮 狃矬麸朕 扃睚灬麸. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "嗅襻赆膻 狯衢褫篝 麸 翮 屦屙 鲲褴."
+msgid "Keyboard"
+msgstr "须珀赳镫轱"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"诉篝 豉 赆翦篝襻祆蓓 溴滹燧睐:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"诉篝 豉 溴滹燧睐 瘃矧 屦犴狯锺:\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "梳爝 颀桁轶, 贶眙 觌殛 篝镯 箱玢 篝 旭秣珈蓓.\n"
+msgid "Choose the connection you want to configure"
+msgstr "硼殡蓊翦 翮 簖礓弩 痫 栎脲翦 磲 聃桁唧弭"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-倪牯躏 燧簌 webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "嗅襻赆膻 疱耖燧礤翦, 聃桁哝弭衢 麸 屦唣邃 狍鲠脲哚..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-倪牯躏 燧簌 rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "燥 Mandrake Linux 9.1 暹磲 躔蓠翎翮 痣狒鳇耢 犴莛趱铉"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-倪牯躏 燧簌 SSH.\n"
+msgid "Configuring network device %s"
+msgstr "妖桁轶 篚箨艴掾 溟牯 %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-倪牯躏 燧簌 FTP.\n"
+msgid "activated"
+msgstr "屙羼泔痫殓燧盹"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-葬轫哚 \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 痫獒 溟屦狯 溟牯 栳 黢珞殪镳镩摅弭 汩 麸 "
+"孱躔珩弭玺 dhcp."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "另徭摁珞 疳贻豉 瘃矧 犴徕荑扉箸..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-雨腌顸 倪箨矧.\n"
+msgid "Mount point: "
+msgstr "隅戾唢 簖礓弩珧: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- 尼哽镯狎 (%s) 灬孢 戾 :\n"
+msgid "parse all fonts"
+msgstr "犴茈躞  豉 泷犰灬麸箦轳"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\t另暨泷狯 馏鲠脲哚  tar 赆 gzip\n"
+msgid "With X"
+msgstr "体 "
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t另暨泷狯 馏鲠脲哚  tar 赆 bzip2\n"
+msgid "Multi-head configuration"
+msgstr "妖桁轶 痫腚 赍鲠膻"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\t座襁 麸 榴麇唢 吁篝揿狒矧\n"
+msgid "No browser available! Please install one"
+msgstr "腻 怦蓁珀 疱耖玢玺掾! 嗅襻赆膻 邈赆翎篝摅翦 麸"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"拈狒揆珞 躔狁鼽眙 聃桁唧妁;\n"
+"祥 赳蓣秕箦 聃桁唧彘 暹磲:\n"
"\n"
-"- 硼殡镢蒡:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
-"\t\t 镬 黢摅翮: %s\n"
-"\t\t 篝 栎箸: %s \n"
+"腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 麸 ReiserFS 汩 赆翎綮摅彘 扉犟羼弪 狃 "
+"32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-" 琉镨揸艴箸 燧簌 %s 篝镯 躔镫镢轶艮: %s\n"
+"燥 瘃镫腼 rwho 屦轸褫疱 箦 狃镬彡聃箪蓓秕 黢摅翦 磲 滹蹴 蓓犴 \n"
+"赆糗腼泔 豉 黢珞酤 麸 篚篝揿狒矧 (疳顸祜轱 戾 麸 finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\t逾摅殪=%s"
+msgid "Domain name"
+msgstr "柬镬 燥燧"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-" 琉镨揸艴箸 箦 葬轫哚 篝 篚箨艴: %s"
+msgid "Sharing of local printers"
+msgstr "曙轫 黢摅 麸痖掰 尻趱瘗酤"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "郁 吁箨艴 : %s"
+msgid "Available printers"
+msgstr "拈徼蒹殪镩 尻趱瘗艮"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "朵彘"
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- 陪泷狯 箦 CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- 拈徙襻鲛 狁麇啭 tar 狃 麸 溥箨 戾糗 麸 犴暨泷狯 狍鲠脲哚.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- 琉镨揸艴箸 篝镯 箨腌顸 溥箨 篝珥 栎箸: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- 峨脶 榴麇哚:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"育篝珈 Linux\n"
"\n"
-"- 榴麇哚 遵珞酤:\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 翔鏫n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 另茈躞鏫n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 娘觊燹\n"
+"\n"
+"\n"
+" 歪閈n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 硼殡镢蒡\n"
+"\n"
+"\n"
+"\n"
+" 槛 孱躔珩弭玺掾\n"
+"."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "痣荇矧 赍殪蓓秕"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "酗 栎脲翦 磲 篚礓蒹弭 翮 篚箨艴 %s;"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr " 瘃镪徼锺轶燧礴 爝箬 (箦 溴豸羼屦翎)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "拈屦狯 \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "体 翮 忉箝贽 翦觎珩啭箸 (篚黹篝荇衢!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 痣揸赳秕"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- 榴麇哚 吁篝揿狒矧:\n"
+"胚磲 %d 尻趱瘗糨 篚礓屐蓓镩 狃艴桢哚 篝 簖篝珈 筢"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "娘觊燹"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"- 戌爿 另糸泷荟 馏鲠脲哚:\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "硼殡镢 黢摅翮 麇轳镪唔玺"
+msgid "Korea"
+msgstr "曙褫"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "另暨泷狯 馏鲠脲哚 遵珞酤"
+msgid "Your choice? (default `%s'%s) "
+msgstr " 屦殡镢 筢; (孱 锺轶祜 `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "另暨泷狯 馏鲠脲哚 吁篝揿狒矧"
+msgid "Raw printer"
+msgstr "陵狒蓠汜篝矧 尻趱瘗艮"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "嗅襻赆膻 屦殡蓊翦 糸 栎脲翦 磲 疖皴翦 箦 犴暨泷狯 狍鲠脲哚"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "燥 屦唧珈 镬 赆翎箨艴狍艮 麸 屦孱羼汜篝"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "篝 吁箨艴 葬轫哚"
+msgid "Vendor"
+msgstr "梳翎箨艴狍艮"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "篝 CDROM"
+msgid "Interface %s"
+msgstr "拈屦狯 %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "篝 倪牯躏"
+msgid "Configure mouse"
+msgstr "妖桁轶 痫眙殛轱"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "篝镯 雨腌顸 倪箨"
+msgid "Choose the mount points"
+msgstr "硼殡蓊翦 箸戾哚 簖礓弩珧"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 栎箸 豉 犴糸泷荟 狍鲠脲哚"
+msgid "OK"
+msgstr "彭糗铄"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "绣耖篌羼弪 硼殡镢蒡"
+msgid "Yugoslavian (latin)"
+msgstr "瞄秕汴矬脶忾挈 (脶糸黹挈)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "悬翦"
+msgid "Installing"
+msgstr "陪赆糗篝狍"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "酗"
+msgid "Launch userdrake"
+msgstr "抨赀礴箸 userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "蚤"
+msgid "Is this an install or an upgrade?"
+msgstr "旭彘翎 汩 邈赆糗篝狍 汩 犴徕荑扉箸;"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "拈徙襻鲛 豉 狁麇啭 tar 狃 麸 溥箨 戾糗 翮 戾翎鲲褴 箦 茈腼 燧箫."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "朋羼殛 贶耵 ISDN"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
+#, fuzzy, c-format
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr "Linux"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
-"琉矬麸朕 珉尻赳镯殛稞 扃睚灬麸 戾糗 狃 贶桢 朕 犴糸泷荟 狍鲠脲哚 篝:"
+"吁泖狁玺揆獒, 颀桁轶 溟牯 赆 溟徜殛酏秕 翦脲啭箦.\n"
+"祥 聃桁唧彘 栳 弼狁祜篝稞 酤襻 篝 簖篝珈 筢.\n"
+"\n"
#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-雨腌顸 倪箨矧.\n"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
+"屙羼泔痫哏箸 酤襻 Linux\n"
"\n"
"\n"
-" 隅戾啭箸."
+" 磔颸n"
+" Linux\n"
+"\n"
+" 陪赆糗篝狍鏫n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 另徕荑扉箸\n"
+" Linux\n"
+" 黢摅翮騖n"
+"\n"
+"\n"
+" 另徕荑扉箸 Linux\n"
+" 尻翦脲唪衢 另徕荑扉箸\n"
+" Linux."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 麸 \n"
-"燧箫 汩 翎 犴暨泷狯 \n"
-"狍鲠脲哚"
+msgid "Printer on remote CUPS server"
+msgstr "琉镬彡聃箪蓓矧 尻趱瘗艮 箦 孱躔珩弭玺 CUPS"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 麸 \n"
-"溟荏翮灬 戾翎铨 麸 贶桢\n"
-"犴暨泷狯秕 狍鲠脲哚"
+"琉蒴貅 狯徇皴箸 麸 尻趱瘗艮 \"%s\" 狃 麸 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "遵摅 溽哽镯"
+msgid "delete"
+msgstr "溟徙襻鲛"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "扃黹徇"
+msgid "here if no."
+msgstr "邃 犴 ."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "柬镬 篚篝揿狒矧"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
-msgstr "邂滹灬溟徇"
+msgid "The maximum lease (in seconds)"
+msgstr " 燧汩篝 爝箬 (箦 溴豸羼屦翎)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr "赆桤戾耖碥"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 箦轳獒贽 椠襻 篝珥 镳镞 暹磲 篚礓邃屐蓓 麸 痫眙哧 筢."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr "獒哚"
+msgid "Did it work properly?"
+msgstr "隋轸稞胥珞 簌篝;"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "雨腌顸 倪箨矧 / NFS"
+msgid "Poor"
+msgstr "拄"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "The DHCP start range"
+msgstr "To 轱 尻赀礴箸 DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "嗅襻赆膻 锺唧翦 麸 赆糗腼泔 狃镨揸艴箸: "
+msgid "Grenada"
+msgstr "民屙茕"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
+msgid "Unsafe"
+msgstr "另狍鲠胼"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s 麸戾唑"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "篚箨艴."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "槛"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"嗅襻赆膻 彘筌沐翎 麸 镬 篚箨艴掾 汩 翮 黢摅 豉 犴糸泷荟 狍鲠脲哚"
+"胚磲 尻趱瘗艮 筢 扉 痫膈黢珞糸贽 篚箨艴 狃 翮 HP 翮 Sony "
+"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-"
+"V100), an HP PhotoSmart or an HP LaserJet 2200;"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "遵摅 翎轫哚 汩 翎 狁麇哚 狍鲠脲哚"
+msgid "Guadeloupe"
+msgstr "蔑踽溴腼"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "腻 赆栾襁篝珀 篚箨艴 CD"
+msgid "could not find any font.\n"
+msgstr "溴 怦蓁珀 赆爝 泷犰灬麸箦轳躙n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"嗅襻赆膻 彘筌沐翦 麸 镬 翮 篚箨艴掾 邈泷狯掾 CD\n"
-".. : 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "容脲翦 麸 BackSpace 磲 屦轶赳蓥彘 Delete 篝珥 觑眢;"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "嗅襻赆膻 锺唧翦 犴 贶礤翦 黢摅 篚箨艴掾 DVDRAM"
+msgid "Vertical refresh rate"
+msgstr "吁黜玺 赆翎挈聃鲧 犴犴甍箸"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "嗅襻赆膻 锺唧翦 犴 贶礤翦 黢摅 篚箨艴掾 DVDR"
+msgid "Entering step `%s'\n"
+msgstr "罗灬 `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr "逾摅殪 轧襻 "
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "RW"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing %s ..."
+msgstr "瘤衢皴唪衢 %s..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "嗅襻赆膻 锺唧翦 犴 贶礤翦 黢摅 篚箨艴掾 CDRW"
+msgid "Niger"
+msgstr "瓦沌襻"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr ""
+msgid "No printer"
+msgstr "梳磔磲 尻趱瘗艮"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "嗅襻赆膻 锺唧翦 麸 齄耧 麸 CD/DVD "
+msgid "alert configuration"
+msgstr "妖桁轶 彘滹痫檗箦"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"篚箨艴轡n"
-"\n"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "硼殡镢蒡 抨趱瘗艮 NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "遵摅 CD/DVDROM 汩 翎 狁麇哚 狍鲠脲哚"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s 旭镥痖箨珞 (%s)Bootsplash"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "遵彘苕弭衢 麸 溟牯踽挈 镬, 镬 黢摅翮 赆 犍溟挈 瘃忉箸!"
+msgid "General"
+msgstr "缅黹贶"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "琉镬礴禳礤躞 麸 犍溟觑 瘃忉箸"
+msgid "Printing system: "
+msgstr "育篝珈 尻酏瘗箸: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "嗅襻赆膻 彘筌沐翦 麸 犍溟挈 瘃忉箸"
+msgid "Add a user"
+msgstr "旭矬柁赙 黢摅翮"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your login"
-msgstr "嗅襻赆膻 彘筌沐翦 麸 镬 黢摅翮"
+msgid "Network configuration (%d adapters)"
+msgstr "妖桁轶 溟牯 (%d 瘃矬狁祜沐唑)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "疙 狃狁徇翮麸 狁麇唢 (麸 %s ) 溴 躔荞麇"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "珠腴痧唔弪"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "彭糗铄"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "柬镬 硝褴 抨趱瘗艮"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "容脲翦 磲 黢珞殪镳镩摅弭 麸 aboot;"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "隋蹶锺哚"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
+"燥 PDQ 躔矬翮襁驽 禳盹 麸痖觑 尻趱瘗糨, 琉镬彡聃箪蓓矧 尻趱瘗糨 LPD 赆 "
+"尻趱瘗糨 Sockete/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "嗅襻赆膻 锺唧翦 麸 溟牯踽挈 镬 翮 IP"
+msgid "Move files to the new partition"
+msgstr "体翎赀礴箸 狁麇啭 篝珥 磔 赆糗綮珞"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr "峨腼\n"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
+msgstr "旭矬柁赙 CUPS."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" 体翎鲲褴 \n"
-"轧襻"
+msgid "Restore From Catalog"
+msgstr "硼犴狯锺 狃 梳糗腼泔"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
-"溺扉秕胥哚/体翎鲲褴\n"
-"犴糸泷荟 狍鲠脲哚 豉 觌彘溟 SSH"
+msgid "Pitcairn"
+msgstr "娃箫 羞絷衢耥"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Net Method:"
-msgstr "梯栾滹 溟牯:"
+msgid "group :"
+msgstr "镬茕 :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "遵摅 簖礓弩 溟牯 汩 翎 狁麇哚 狍鲠脲哚"
+msgid "mounting partition %s in directory %s failed"
+msgstr " 簖礓弩 翮 赆糗綮珞珧 %s 篝镯 赆糗腼泔 %s 狃蒴貅"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Users"
-msgstr "遵摅翦"
+msgid "Lilo screen"
+msgstr "翔 Lilo"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "LILO with graphical menu"
+msgstr "LILO 戾 泷狯殛 戾盹"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "Estimating"
+msgstr "抨暨扃箸"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "瘤徇皴箸 硼殡邈燧睐"
+msgid "You can't unselect this package. It is already installed"
+msgstr "腻 祓锺暹翦 磲 狃镥痖胼铄翦 狨酎 麸 疳贻麸. 胚磲 掬 邈赆翦篝珈蓓"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "座襁 翮 cache 麸 疱耖玢玺"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "抨趱瘗艮 \"%s\" 箦 孱躔珩弭玺 SMB/Windows \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 秕 黢摅翦 栎脲翦 磲 躔荞黠蹴 篝 犴暨泷狯 狍鲠脲哚"
+msgid "Go on anyway?"
+msgstr "歪 篚礤鬟簌;"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"体 狨艮 翮 屦殡镢 栳 祓锺暹翦 磲 屦犴狯蓠弭 镳镩徜摒雉錦n"
-"蓐滹箸 麸 赆翎朦泔 /etc."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "剀黜 汩 溟徼蒹殪 疳贻翎 赆 溏扉秕胥 钺碥 翮 廛箸 溴滹燧睐 rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "座襁 翎 犟唧殪 狁麇哚 ( 犍溟觑, 镬茕弪, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "轴唔弭衢 磲 扃 暹磲 邈泷茗殪 燧箫!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
+msgid "Specify options"
+msgstr "旭矬溟锺轶禳 疳襻燧赳"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "另暨泷狯 狍鲠脲哚 豉 狁麇啭 吁篝揿狒矧 (赆糗腼泔 /etc )"
+msgid "Vanuatu"
+msgstr "箩盹踯麸"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"刘糨 镩 屦殡镢蒡 祓锺稞 磲 疖耧蹴 犴暨泷狯 狍鲠脲哚 赆 磲 屦犴狯蓠秕 "
-"麸 /etc\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "胚翦 麸 镬 麸 孱躔珩弭玺 IP 麸 瘃蒺彘 磲 滹栾!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"涕 瘃矬狁祜箪蓓 溟箨蒴 尻赀礴箸 筢 溥礤 翮 漉磲酎翮翎 磲 尻觊磙箦翦\n"
+"麸 簖篝珈 筢 鼯襁 翮 黢摅 麸 瘃镢褴祆狒矧 尻赀礴箸. 刘酎 暹磲 "
+"黢摅殪 遘 溴 栎脲翦\n"
+"磲 邈赆翎篝摅弭 麸 SILO , 遘 贶痫轱 茈腼 脲轸秕胥殛 赆翎篝褫 麸 "
+"SILO 遘 镩 \n"
+"聃桁唧彘 筢 溴 屦轸褫痫蹴 翮 黢摅 SILO. 刘艮 溟箨蒴 祓锺暹 屦唧珧 磲 "
+"黢珞殪镳镩玷暹 箦\n"
+" 篚礓踽箪 戾 翮 溟箨蒴 溟荏珧 麸 Mandrake, 贶盹眙狎 艴觑朦翦耒 翮 "
+"屦犴狯锺 麸 篚篝揿狒矧 戾糗 狃 箫忉褶 怆茆.\n"
"\n"
-"嗅襻赆膻 屦殡蓊翦 弪 糸 屦殡镢蒡 痫 黢彘苕弩翦.\n"
+"另 栎脲翦 磲 溏扉秕胥摅弭 扉 糨麸獒 溟箨蒴 彘筌沐翦 扉 赍磙 溟箨蒴 篝镯 "
+"镤玢黒n"
+"溟箨蒴狎 赆 疳艮篝 \"彭糗铄閈"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 翎 狁麇哚 麸躜 赆翎朦泔躜 赆 贶眙 觌殛 篝 '瘃矬柁赙'"
+"腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 犟躔麸泷狯珈蓓 簖篝珈 狁麇啭 汩 "
+"瘃矬荞翮箸 %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "硼殡镢 榴麇唢"
+msgid "Norfolk Island"
+msgstr "娃箫 忘聆镫"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "龄狒 溏扉秕胥哚 赆翎朦泔!"
+msgid "Theme installation failed!"
+msgstr " 邈赆糗篝狍 栎灬麸 狃蒴貅!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr "遇茈灬 赆糗 翮 狃矬麸朕 扃睚灬麸. \n"
+msgid "Nothing to do"
+msgstr "梳爝 屙蓠沐獒 瘃矧 尻糨脲箸"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"鸟狍翮耖玺弪 Drakbackup 燧簌 翎轫哚:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "遵摅 汩 loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"鸟狍翮耖玺弪 Drakbackup 燧簌 CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "篷汜脲唢 另狯锺茯 遇犭燔豉 Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"鸟狍翮耖玺弪 Drakbackup 燧簌 %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "黢摅 pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" 遇茈灬 篝 簖礓弩 FTP . 腻 摁犴 漉磲艮 狃矬麸朕 豉 犴糸泷荟 "
-"狍鲠脲哚 燧簌 FTP.\n"
+msgid "Moving files to the new partition"
+msgstr "体翎赀礴箸 狁麇啭 篝珥 磔 赆糗綮珞"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-"狃矬麸朕 脒篝狎 狁麇啭 燧簌 FTP: %s\n"
-" "
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s 戾 信裳撂猎墒 屦轸荀蹴箸 赳轶溟荏翎豉 泷狯殛"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "腻 躔荞黠蹴 犭脶爿 汩 磲 氵盹蹴 犴暨泷狯 狍鲠脲哚!"
+msgid "Advanced"
+msgstr "瞄 旭秣珈蓓秕"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "另暨泷狯 馏鲠脲哚 雨腌耧 倪箨秕"
+msgid "Transfer"
+msgstr "体翎鲲褴"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "另暨泷狯 馏鲠脲哚 峨膣 狁麇啭..."
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (语蹒溟挈)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "拈徜殛狍哚 另糸泷荟 狍鲠脲哚 篝镯 雨腌顸 倪箨..."
+msgid "More Options"
+msgstr "绣耖篌羼弪 硼殡镢蒡"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup User files..."
-msgstr "另暨泷狯 馏鲠脲哚 豉 狁麇啭 遵珞酤..."
+msgid "Afghanistan"
+msgstr "瘤汜黹篝茼"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup system files..."
-msgstr "另暨泷狯 馏鲠脲哚 篚篝揿狒矧 狁麇啭..."
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "拈徙襻鲛 豉 狁麇啭 tar 狃 麸 溥箨 戾糗 翮 戾翎鲲褴 箦 茈腼 燧箫."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr "梳扉 翎轫哚 篝 %s!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
+msgstr ""
+"燥 cron 暹磲 扉 忉箝贽 躔珩弩哚 UNIX 痫 赳蓣彘 屙麸胼 赆栾耖箪蓓弪 狃 \n"
+"麸 黢摅翮 箦 翎牯 黢镯殛 溟狍艮灬翎. 燥 vixie cron 瘃矬栎翦 蓓犴 "
+"狁殍禳 \n"
+"屦轲胼镯 漉磲麸艮豉 痫 疱耖脶焘茼秕 赆臊翦耒 狍鲕脲獒 赆 痖 轶黪褫 "
+"聃桁唧彘."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "旭腌灬 溟赆轾燔豉 篝珥 瘃忉箸 麸 CD."
+msgid "Burundi"
+msgstr "甜秕耧糸"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "后 黢彘狍麸 戾耖贶 脲痿 汩 磲 筲珞翦 麸 燧箫."
+msgid "Add Client -->"
+msgstr "旭矬柁赙 绣胲翮 -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "燥 燧箫 溴 祓锺暹 磲 筲珞翦!"
+msgid "Read carefully!"
+msgstr "拈徕荏翦 瘃矬尻糸贶!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "轴唔弭衢 磲 扃 暹磲 邈泷茗殪 燧箫!"
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "腻 躔荞麇 CDR/DVDR 篝镯 镤玢!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr " 戾翎鲲褴 WebDAV 狃蒴貅!"
+msgid "Port"
+msgstr "三襻"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "燥 狃镬彡聃箪蓓 WebDAV 暹磲 掬 箦 篚泖耧黹箪!"
+msgid "No (experts only)"
+msgstr "槛 (禳盹 汩 彘溟觑)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Total progess"
-msgstr "吁盹腴贽 瘃滹"
+msgid "No kernel selected!"
+msgstr "腻 屦殡蓣翮赍 瘐褶磲!"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-GID"
+msgstr "像轶禳 GID"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "The encryption keys do not match"
+msgstr "葬 觌彘溟 犟躔麸泷荟珞珧 暹磲 犴镩"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr "腻铋 痣揸赳 \"Windows\""
#: ../../standalone/drakbackup:1
#, c-format
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "犴 锺轶翦 磲, 蓦邈黠 赍睨 犍溟掰 瘃忉箸 篝 /etc/shadow."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
"\n"
-"ssh -i %s %s\\@%s\n"
+" Linux\n"
+" 琉镤秣轡n"
+"."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"硼轸貅掾 戾翎鲲褴\n"
-"后 磲 黢彘狍翦 磲 屦犭玷妪箦翦  祓锺暹翦 磲 瘃矬疱胲箦翦 麸 "
-"溟彡镬轶艮 戾:\n"
+"刘艮 暹磲 扉 脒篝 戾 糸 溟徼蒹殪弪 屦殡镢蒡 尻酏瘗箸 汩 麸 赳蓣镯 "
+"尻趱瘗艮:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "另犭彘"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"鼯襁 磲 骁翮桢 犍溟挈 瘃忉箸."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"颀桁轶 tinyfirewall\n"
+"\n"
+"刘酎 聃桁哝彘 麸 瘃矬殛 筢 firewall 汩 狨酎 麸 扃鬈礴灬 Mandrake "
+"Linux.\n"
+"瞄 扉 轶黪褶 狯矬轾燧礴 臊箸 firewall, 疳襻赆膻 觑轸茴翦 篝珥\n"
+"彘溟赍蹯蓓 MandrakeSecurity Firewall 溟犴镬."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "麸 %s 溴 犴翎痫犟唔弭衢"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"嗅襻赆膻 彘筌沐翦 麸 镬 黢摅翮 麸 犍溟挈 瘃忉箸 赆 麸 镬 麸燧 "
+"汩 翮 簖礓弩 篝镯 host."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "腻 怦蓁珀 麸 %s 篝 %s"
+msgid "Remove selected host"
+msgstr "瘤徇皴箸 屦殡邈燧盹 躔镫镢轶艮"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "恶礴箸 瘃忉箸 赆糗 翮 戾翎鲲褴 麸 %s 篝 %s"
+msgid "Network configuration"
+msgstr "氧桁唧彘 溟牯"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "朋鲠腱蓓矧 犍溟挈 篝 %s"
+msgid "No sharing"
+msgstr "座襁 觑轫 黢摅"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "座襁 羼珞 犍溟觑 篝 %s 篝 椠襻 %s"
+msgid "Move selected rule down one level"
+msgstr "体翎赀礴箸 麸 屦殡邈燧盹 赆睃磲 蓓 屦唣邃 贶豉"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-"甜锺暹 磲 黢彘狍麸 戾耖贶 脲痿 汩 翮 溏扉秕胥哚 豉 觌彘溟:To ../../"
-"standalone/drakbackup:1"
+msgid "Please check if you are using a DVDR device"
+msgstr "嗅襻赆膻 锺唧翦 犴 贶礤翦 黢摅 篚箨艴掾 DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
+msgid "FATAL"
+msgstr "滔裳辽"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+" 孱躔珩弭玺掾 DHCP 栳 屦轸褫疱 茈腼躜 躔镫镢轶糨 磲 铄觊盹 戾 翮 黢摅 "
+"麸 PXE 戾 扉 滹桢唧 溟妪桴眢鏫n"
"\n"
-" DrakBackup 隋痿镬蓠彘弪 另狯锺茯\n"
-"\n"
+" 溟妪桴眢 溟牯 暹磲 %s 戾 黢摅 燔箨 溟牯%s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
+msgid "Delete"
+msgstr "拈徙襻鲛"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
"\n"
-" 尼哽镯狎 犴狯锺茯 DrakBackup \n"
-"\n"
"\n"
+" 黢摅翮."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" 另狯锺 DrakBackup \n"
-"\n"
+"甜锺 磲 聃桁唧 麸 簖篝珈 筢 蒴箝 翦 磲 铄觊碥彘 狨酎灬翎 箦\n"
+"泷狯殛 疱耖廛腚镯 (XFree).\n"
+"硼殍蹯暹翦 翮 狨酎灬翮 尻赀礴箸 泷狯殛稞 疱耖廛腚镯麸;"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "兴茄现涎膳"
+msgid "Build the disk"
+msgstr "溺扉秕胥哚 溟箨蒴狎"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "滔裳辽"
+msgid "Disconnect %s"
+msgstr "琉矬溴箸 %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "醒嫌献"
+msgid "Status:"
+msgstr "梳糗篝狍:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "燥 cron 溴 暹磲 彡 溟徼蒹殪 篝秕 扃-root"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr " 邈赆糗篝狍 麸 %s 狃蒴貅. 旭镪朕桤赍 麸 彡秕栾 篥茈灬:"
+msgid "SSH Server"
+msgstr "蓬躔珩弭玺掾 SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "槛, 溴 屦殍蹯 狨酎灬翮 瘃矬疠脶箸"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-倪牯躏 燧簌 rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "歪, 屦殍蹯 狨酎灬翮 瘃矬疠脶箸 戾 (黢摅翮, 疱耖廛腚镯)"
+msgid "European protocol"
+msgstr "捧聩疳 瘃镫腼"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "隋轸秕胥哚 泷狯殛稞 疱耖廛腚镯麸 赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", 尻趱瘗艮 \"%s\"篝镯 孱躔珩弭玺 \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "梳糗篝狍 篚篝揿狒矧"
+msgid "Error"
+msgstr "遇茈灬"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "漉磲酎翮翎 \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "翔 Lilo"
+msgid "Australia"
+msgstr "刘篝襻脒"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"硼殡蓊翦 麸 栎灬 \n"
-"汩 麸 lilo 赆 麸\n"
-"bootsplash, 祓锺暹翦\n"
-"磲 翎 屦殡蓊弭 赆閈n"
-"铄鼯耖篝"
+msgid "please wait during ttmkfdir..."
+msgstr "疳襻赆膻 疱耖燧礤翦 赆糗 麸 ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "容灬翎"
+msgid "Configure only card \"%s\"%s"
+msgstr "妖桁轶 禳盹 翮 贶耵狎 \"%s\" %s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "造揿 Splash"
+msgid "Level"
+msgstr "硼唣邃"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Change the printing system"
+msgstr "岭脶戕 篚篝揿狒矧 尻酏瘗箸"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"遵珞殪镳镩暹翦 麸 %s  瘃襻祆 尻赀礴箸.\n"
-"受眙 觌殛 篝 妖桁轶 汩 磲 铄觊磙箦翦 麸 镤玢 邈赆糗篝狍珧."
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "硼轸貅掾 邈赆糗篝狍 桢燔豉 LiLo 赆 Bootsplash"
+"\n"
+" 蚤?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr " 邈赆糗篝狍 栎灬麸 狃蒴貅!"
+msgid "Configure services"
+msgstr "妖桁轶 躔珩弩辋"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "隅戾啭箸"
+msgid "Broadcast Address:"
+msgstr "拈妪桴眢 体糗滹箸:"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "硼犴尻赀礴箸 'lilo'"
+msgid "mount failed: "
+msgstr "簖礓弩 狃蒴貅: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"龄蹴犰哚 屦犴尻赀礴箸 麸 LiLo!\n"
-"抨翦胼篝 \"lilo\"  root 篝珥 泷犰燹 屙麸膻 汩 磲 镫镪腌聩桢 "
-"邈赆糗篝狍 麸 栎灬麸 LiLo"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
+#, c-format
+msgid "Image"
+msgstr "砰挈磲"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "溺扉秕胥哚 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"琉蒴貅 瘃矬柁赙 麸 尻趱瘗艮 \"%s\" 篝 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "龄蹴犰哚 尻赀礴箸 mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Remote Administration"
+msgstr "琉镬彡聃箪蓓 溟狩暹耖箸"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"龄蹴犰哚 邈泷狯掾 /etc/sysconfig/bootsplash\n"
-"燥 狁麇唢 溴 怦蓁珀."
+"腻 躔荞麇 痣蒿 躔矬艮耖铉 PCMCIA 汩 麸躜 瘐褶礤 2.2. 受眙 黢摅 麸 "
+"瘐褶磲 2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "陪泷狯 %s"
+msgid "Selected All"
+msgstr "硼殡镢 茧"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "龄蹴犰哚 邈泷狯掾 麸 /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "腻 怦蓁珀 麸 燹眭灬 lilo"
+msgid "Webmin Service"
+msgstr "震珩弩哚 Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "另糸泷狯 %s 箦 %s"
+msgid "device"
+msgstr "篚箨艴"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "另暨泷狯 馏鲠脲哚 麸 %s 箦 %s.old"
+msgid "All"
+msgstr "茧"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "溺扉秕胥哚 磔秕 栎灬麸"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "酗轱 簖篝珈 尻酏瘗箸 栎脲翦 磲 黢珞殪镳镩摅弭;"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"澎鲕黹箸 栎灬麸騖n"
-"篝珥 觑眢"
+msgid "Greece"
+msgstr "烹胲溽"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "陪赆糗篝狍 桢燔豉"
+msgid "An error occurred"
+msgstr "旭镪朕桤赍 篥茈灬"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "隋轸秕胥哚 Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"刘酎 麸 疳贻麸 瘃蒺彘 磲 犴徕徼扉篝暹\n"
+"胚篝 筮泔躐矧  栎脲翦 磲 麸 狃镥痖胼铄翦;"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "隋轸秕胥哚 Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "葬扉腴挈 (溟荇犷 泷狯镬琪犴)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "麇轳镪唔玺"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/榴麇唢/竉铒滹"
+msgid "Printer manufacturer, model, driver"
+msgstr "梳翎箨艴狍艮 尻趱瘗艮, 祜眙蓦, 镤玢"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_榴麇唢"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"腻 躔荞麇 燧箫 躔荞麇 瘃矬翎筮 邈泷狯掾 汩 翮 篚箨艴 %s.\n"
+"嗅襻赆膻 彘筌沐翦 蓓."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "妖桁轶 札痫 抨赀礴箸"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+" 赆糗腼泔 %s 疱耖蓣彘 掬 溴滹燧磲\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "腻 怦蓁珀 疱耖玢玺掾! 嗅襻赆膻 邈赆翎篝摅翦 麸"
+msgid "Printer on NetWare server"
+msgstr "抨趱瘗艮 箦 孱躔珩弭玺 NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "簖礓弩 篝镯 镤玢 Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "砰筌沐翦 燧沐栾 祉揿珧 箦 MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "燥 疳贻麸 溴 暹磲 邈赆翦篝珈蓓"
+msgid "Real name"
+msgstr "旭徙灬糸挈 镬"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "嚏 邈赆翦篝珈蓓"
+msgid "done"
+msgstr "想镪腌颃桤赍"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "五鼯耖篝 篷汜脲哚"
+msgid "Please uncheck or remove it on next time."
+msgstr "嗅襻赆膻 狯衢褫篝 麸 翮 屦屙 鲲褴."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "另狯锺"
+msgid "Higher"
+msgstr "狰珉羼"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "硼殡蓊翦 赆翎綮摅彘 瘃矧 祜聆镳镞珞"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"腻 怦蓁珀 贶耵 翮脲狍珧 篝 扃鬈礴燔 筢.嗅襻赆膻 忮忉轾桢唪  扉 "
+"躔矬翮耖纥戾礴 贶耵 篝 Linux 暹磲 篚礓屐蓓.\n"
+"\n"
+"\n"
+"甜锺暹翦 磲 屦轶赍鲷暹翦 翮 廛箸 溴滹燧睐 篝: \n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "戈滹箸:"
+msgid "Can't find %s on %s"
+msgstr "腻 怦蓁珀 麸 %s 篝 %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "絮褶磲:"
+msgid "Japanese 106 keys"
+msgstr "舍瘗黹挈 106 痣揸赳"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "嗅贻麸:"
+msgid "This will take a few minutes."
+msgstr "刘酎 栳 溟狁贻箦 戾耖贶 脲痿."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "碰狁祜戕:"
+msgid "Burkina Faso"
+msgstr "甜秕耜唔 周箫"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "箱玢镞 妖桁轶珧"
+msgid "Use scanners on remote computers"
+msgstr "遵摅 筢聩酤 箦 狃镬彡聃箪蓓秕 躔镫镢轶糨"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "拈徙襻鲛 屦殡邈燧盹 赆睃磲"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Windows Migration tool"
-msgstr "篷汜脲唢 体糗忉箸 Windows "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "CUPS"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "砰筌沐翦 溟箨蒴 篝镯 镤玢 %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "拈狩彘耖篝掾 孙汩箪殛稞"
+msgid "Maldives"
+msgstr "提脘哜弪"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "琉镬彡聃箪蓓矧 鸽邈黠"
+msgid "compact"
+msgstr "篚祓徙掾"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 脲痿"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "篝 赆碥腴 %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", 痫膈黢珞糸贽 篚箨艴"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "塑矧"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "篷汜脲唢 吁泖耧黹箪稞"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"腻 躔荞麇 赆糗祠珞 FAT 汩 犭脶戕 戾爿栾躜 ( 溴 躔荞麇 狁赍酎 齄耧)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "箱玢 旭珧 诛褴"
+msgid "Up"
+msgstr "熊睐"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "瘦眙耧 烹葶黠 Mandrake"
+msgid "Firewall"
+msgstr "燥喵矧 旭矬翎筮狎"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "篷汜脲唢 另狯锺茯 遇犭燔豉 Mandrake"
+msgid "Area:"
+msgstr "绣耖秣:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "嗅褴戾赳镩"
+msgid "(E)IDE/ATA controllers"
+msgstr "咫邈牯蒡 (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "妖桁轶 育礓弩珧 拈徜殛酏秕"
+msgid "Printer Server"
+msgstr "蓬躔珩弭玺掾 抨趱瘙箦"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "绣胲翮 DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr " 狃矬溴箸 狃 麸 拈徜哧趱 镫镪腌颃桤赍."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "受耵 Ethernet"
+msgid "Custom configuration"
+msgstr "旭矬狁祜箪蓓 妖桁轶"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "旋腌 溟牯"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"嗅襻赆膻 溏膻篝 翮 栎箸 痫 栳 暹磲 瘃矬廛箝扃 彘挈磲 邈赆糗篝狍珧.\n"
+"\n"
+"另 溴 蓣弭 蓓犴 躔荞黠 赆糗腼泔, 疳襻赆膻 犴糸泷茗弭 翎 疱耖鬻屙 麸 "
+"CD or DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "札痫 簖礓弩珧: "
+msgid "Saint Pierre and Miquelon"
+msgstr "俞轫 虚羼 赆 涕赍朦"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+" 硼犴狯锺躙n"
+"\n"
+" Drakbackup\n"
+"\n"
+" Drakbackup\n"
+"\n"
+" 箸灬眙殛黒n"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Profile: "
-msgstr "旭秭唠: "
+msgid "saving Bootsplash theme..."
+msgstr "狃镨揸艴箸 栎灬麸 Bootsplash ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "妖桁轶 簖礓弩珧 拈徜殛酏秕"
+msgid "Portugal"
+msgstr "酗耵镢犭哚"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"腻 蓣弭 簖礓弩 戾 麸 溟徜哧趱.\n"
-"溺扉秕胥摅翦 爝 贶盹眙狎 觌殛 篝 '妖桁轶'"
+msgid "Do you have another one?"
+msgstr "各弭 茈腼;"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-" 溟屦狯 溴 蓣彘 聃桁轶艮 彡. \n"
-"抨翦胼篝 麸 镤玢 颀桁轶珧 篝珥 牾襁 镨"
+msgid ", printing to %s"
+msgstr ", 尻酏瘗箸 篝 %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "旭蒺彘 磲 锺唧翦 麸 溟牯踽挈 镬 翮 IP 溟妪桴眢.\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "activate now"
-msgstr "屙羼泔痫哏箸 酤襻"
+msgid "Toggle to normal mode"
+msgstr "岭脶戕 箦 赆盹黹挈 赳 脲轸秕胥哚"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "狃屙羼泔痫哏箸 酤襻"
+msgid "Generic"
+msgstr "缅黹贽"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "疱胲翮 DHCP"
+msgid "Cylinder %d to %d\n"
+msgstr "数腴礓耧 狃 %d 甍 %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Started on boot"
-msgstr "五赀礴筢 篝珥 尻赀礴箸"
+msgid "New profile..."
+msgstr "洼 瘃秭唠..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "旭镫腼 抨赀礴箸"
+msgid "Which disk do you want to move it to?"
+msgstr "渝 痫辄 溥箨 栎脲翦 磲 戾翎觊礴桢唪;"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "旭矬狁祜爿狎 %s: %s"
+msgid "Display logo on Console"
+msgstr "澎鲕黹箸 腼泓趱痫 篝珥 曙眢"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "妖桁轶 L镣"
+msgid "Windows Domain"
+msgstr "燥燧狎 Windows "
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "LAN configuration"
-msgstr "妖桁轶 LAN"
+msgid "Interface %s (on network %s)"
+msgstr "拈屦狯 %s (篝 溥牯躏 %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"腻 蓣弭 贶痫獒 聃桁轶燧礴 溟屦狯.\n"
-"氧桁唧翦 翮 贶盹眙狎 觌殛 篝 '妖桁轶'"
+msgid "INFO"
+msgstr "兴茄现涎膳"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect..."
-msgstr "育礓弩..."
+msgid "Wallis and Futuna"
+msgstr "娃箫 蔑踯腴 赆 诛豸稞磲"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disconnect..."
-msgstr "琉矬溴箸..."
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "旭蒺彘 磲 溏扉秕胥摅 瘃 麸 /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not connected"
-msgstr "腻 篚礓蓁珀"
+msgid "Is FPU present"
+msgstr "燥 FPU 暹磲 疳顸"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connected"
-msgstr "吁礓蓁珀"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "腻 怦蓁珀犴 筢聩糨 痫 磲 暹磲 溟徼蒹殪镩 篝 簖篝珈 筢.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"旭镥殇镳镞珞, 屙麸疬篝珀 扉 茈腌 簖礓弩 拈徜殛酏秕 痫 唧 黢珞殪镳镩暹 "
-"麸 溥牯觞 筢"
+"座襁 屦轲胼镯 痣珩秭锺咤騖n"
+"汩 狨艮 翮 躔珩弩哚."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "拈屦狯:"
+msgid "Build Single NIC -->"
+msgstr "溺扉秕胥哚 田盹 NIC -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "旋腌 溟牯:"
+msgid "Is this correct?"
+msgstr "御篝;"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "碰狁祜戕"
+msgid "Marshall Islands"
+msgstr "娃箫 誊耋犭"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "受眙 觌殛 邃 汩 磲 铄觊磙箦 镤玢 ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "箱玢..."
+msgid "Root password"
+msgstr "戍溟挈 Root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Build All Kernels -->"
+msgstr "茧"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Status:"
-msgstr "梳糗篝狍:"
+msgid "if set to yes, report unowned files."
+msgstr "犴 锺轶翦 磲, 犴狯锺 茔睐篝 狁麇啭."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Type:"
-msgstr "札痫:"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"腻 蓣弭 锺唧彘 赆糗綮珞 swap\n"
+"\n"
+"歪 篚礤鬟簌;"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet access"
-msgstr "旭忉箸 篝 拈徜哧趱"
+msgid "Server IP missing!"
+msgstr "隋唣彘 IP 麸 孱躔珩弭玺!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "柬镬 篚篝揿狒矧: "
+msgid "Suriname"
+msgstr "语躐轫莒"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "妖桁轶 麸痖觑 溟牯..."
+msgid "Enable ACPI"
+msgstr "彭羼泔痫哏箸 ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "State"
-msgstr "梳糗篝狍:"
+msgid "Graphical Environment"
+msgstr "民狯殛 绣耖廛腚镯"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr "箱玢"
+msgid "Gibraltar"
+msgstr "瞄怦犭糗"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Protocol"
-msgstr "旭镫腼"
+msgid "on Tape Device"
+msgstr "篝 吁箨艴 葬轫哚"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Interface"
-msgstr "拈屦狯"
+msgid "Do nothing"
+msgstr "嚏 贶礤轵 暨痫翎"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "妖桁轶 旭忉箸 篝 拈徜哧趱..."
+msgid "Delete Client"
+msgstr "拈徙襻鲛 绣胲翮"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Wait please"
-msgstr "嗅襻赆膻 疱耖燧礤翦"
+msgid "Filesystem type: "
+msgstr "札痫 篚篝揿狒矧 狁麇啭: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"柬镬 汩 麸 瘃秭唠 痫 栳 溏扉秕胥玷暹 (麸 磔 瘃秭唠 溏扉秕胥暹翎 筢 "
-"犴暨泷狯 麸 躔荞黠眙矧):"
+msgid "Starting network..."
+msgstr "抨赀礴箸 溟牯..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "New profile..."
-msgstr "洼 瘃秭唠..."
+msgid "Vietnam"
+msgstr "麻弭碥"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Profile to delete:"
-msgstr "旭秭唠 汩 溟徙襻鲛:"
+msgid "/_Fields description"
+msgstr "/_绣耖泷狯 绣溥"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Del profile..."
-msgstr "拈徙襻鲛 瘃秭唠..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "洛媵轶麸痫檗篝 翮 狍鲕脲檐 筢"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "妖桁轶 溟牯 (%d 瘃矬狁祜沐唑)"
+msgid "Help"
+msgstr "嘛掼彘"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-" 拈狩彘耖篝掾 旭镡镫掾 X11 筢 屦轸褫疱 磲 篚礓彖暹翦\n"
-"戾 泷狯殛 赳 篝 簖篝珈 筢 戾 麸 育篝珈 嗅襻椠耧 磲 躔矬翮襁驽閈n"
-"翎豸耧礤 溟狯锺弭殛蒡 篚礤漶咤 篝 扃鬈礴燔 筢."
+msgid "Your personal phone number"
+msgstr "旭矬殛 狁殍禳 翮脲鳋盹"
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "硼殡葶镯翎 蓓犴 溟狩彘耖篝 瘃镡镫掾"
+msgid "Which size do you want to keep for Windows on"
+msgstr "蚤 齄耧 栎脲翦 磲 犟狒摅弭 汩 翎 windows 篝"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"龄蹴犰哚 簌篝稞 翦耢狒轶祜 麸 mkbootdisk: \n"
-" %s \n"
-" %s"
+"踢 疱耖篌羼弪 滹觊灬篝殛蒡 箦脒溴 篝茈桤赆 篝镯 尻趱瘗艮.\n"
+"甜锺暹 磲 疱褴箦 贶痫轱 黢矧 燧黢 尻酏瘗箸 磲 铄觊磙箦.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "龄蹴犰哚 fork: %s"
+msgid "Username required"
+msgstr "琉衢翦唪衢 镬 黢摅翮"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"孱' 锺轶祜齖n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 峨脶\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "硼殡镢蒡 尻趱瘗艮 SMB (Windows 9x/NT)"
+
+#: ../../security/help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
msgstr ""
-"腻 躔荞麇 燧箫 躔荞麇 瘃矬翎筮 邈泷狯掾 汩 翮 篚箨艴 %s.\n"
-"嗅襻赆膻 彘筌沐翦 蓓."
+"\n"
+"\n"
+" 琉镤秣 恶礴箸."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "娱泔躐艴翦唪 瘗 蓓 燧箫 暹磲 疳顸 汩 翮 篚箨艴 %s"
+msgid "mkinitrd optional arguments"
+msgstr "瘃镝轳弭殛蒡 屦殡镢蒡 麸 mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Build the disk"
-msgstr "溺扉秕胥哚 溟箨蒴狎"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Output"
-msgstr "割镤矧"
+msgid "Protocol for the rest of the world"
+msgstr "旭镫腼 躔镩痫 挈箪秕"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "琉镬荜聃眢 狁桉狒矧"
+msgid "Print test pages"
+msgstr "抨酏瘗箸 滹觊灬篝殛 箦脒澌"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Add a module"
-msgstr "旭矬柁赙 狁桉狒矧"
+msgid "64 MB or more"
+msgstr "64 MB 疱耖篌羼"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "疳褴脲轼 豉 狁桉荇 scsi"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 糸 滹觊灬篝殛蒡 箦脒溴 痫 栳 尻趱瘗栾.\n"
+"隅.: 滹觊灬篝殛 箦脒溽 鳄麸泷狯哚 祓锺暹 磲 溟狁贻箦 狁赍酎 黢 汩 "
+"磲 尻趱瘗桢 赆 箦 尻趱瘗糨 laser 戾 扉犟 祉揿 祓锺暹 赆 磲 扃 "
+"尻趱瘗桢. 郁轵 疱耖篌羼弪 疱耖痿彘 尻酏瘗箸 糸 趱痖贽 滹觊灬篝殛掾 "
+"箦脒溽 狁赍."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "if needed"
-msgstr "犴 黢彘苕弭衢"
+msgid "Please select the device where your %s is attached"
+msgstr "嗅襻赆膻 屦殡蓊翦 翮 篚箨艴 篝珥 镳镞 暹磲 篚礓屐蓓 麸 %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "疳褴脲轼 豉 狁桉荇 raid"
+msgid "Not formatted\n"
+msgstr "领锺鲲痫哏麸騖n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "force"
-msgstr "戾糗 膺狎"
+msgid "Periodic Checks"
+msgstr "绣耖镤殛镞 鸽邈黠"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "瘃镝轳弭殛蒡 屦殡镢蒡 麸 mkinitrd"
+msgid "PXE Server Configuration"
+msgstr "氧桁唧彘 拈彡镬轶艮 PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Expert Area"
-msgstr "绣耖秣 旭秣珈蓓"
+msgid "Backup the system files before:"
+msgstr "另暨泷狯 狍鲠脲哚 狁麇啭 篚篝揿狒矧 瘃轫 狃:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "kernel version"
-msgstr "蓐滹箸 瘐褶磲"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"刘酎 暹磲 麸 篚礴栝箪蓓 屦唣邃 狍鲠脲哚 汩 蓓 簖篝珈 痫 栳 篚礓彖暹 "
+" 疱胲翮 篝 拈徜哧趱."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "default"
-msgstr "孱' 锺轶祜"
+msgid "First floppy drive"
+msgstr "旭矧 镤玢 溟箨蒴狎"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "General"
-msgstr "缅黹贶"
+msgid "/File/_Quit"
+msgstr "/榴麇唢/竉铒滹"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "溏扉秕胥哚 溟箨蒴狎 尻赀礴箸"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Choose the new size"
+msgstr "硼殡蓊翦 麸 磔 燧沐栾"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size"
-msgstr "梯沐栾"
+msgid "Media class"
+msgstr "孰荏 梯箫"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Module name"
-msgstr "柬镬 狁桉狒矧"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "燥 %s 溴 暹磲 沩酎 狃 狨艮 翮 蓐滹箸 麸 Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr ""
+msgid "Faroe Islands"
+msgstr "娃箫 皱顸弪"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "瘤徇皴箸 泷犰灬麸箦轳 狃 麸 簖篝珈 筢"
+msgid "Restart XFS"
+msgstr "硼犴尻赀礴箸 XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initial tests"
-msgstr "榴鏖贶 翦篝"
+msgid "Add host/network"
+msgstr "旭矬柁赙 躔镫镢轶艮/溥牯躏"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Post Install"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
+"犴 锺轶翦 磲, 蓦邈黠 汩 赍盹 犍溟觑 瘃忉箸, 汩 赆磔磲 犍溟挈 "
+"瘃忉箸 篝 /etc/shadow 赆 汩 黢摅翦 戾 id 0 尻酎 狃 麸 root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "陪赆糗篝狍 & 戾翎赳镳 民犰灬麸箦轳"
+msgid "Please enter the directory to save to:"
+msgstr "嗅襻赆膻 锺唧翦 麸 赆糗腼泔 狃镨揸艴箸: "
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "另糸泷狯 泷犰灬麸箦轳 篝 簖篝珈 筢"
+msgid "Model name"
+msgstr "柬镬 祜眙蓦秕"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove List"
-msgstr "诉篝 瘤徇皴箸"
+msgid "Albania"
+msgstr "岭忉磉"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "硼殡镢 茧"
+msgid "No CDR/DVDR in drive!"
+msgstr "腻 躔荞麇 CDR/DVDR 篝镯 镤玢!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselected All"
-msgstr "琉镥痖腼戕 茧"
+msgid "British Indian Ocean Territory"
+msgstr "埋弭犴殛 配荟 身溟觑 訇遽盹"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "here if no."
-msgstr "邃 犴 ."
+msgid "Normal Mode"
+msgstr "梳盹黹贽 梳糗篝狍"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
+msgstr ""
+"\n"
+"\n"
+" 隅戾啭箸."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "click here if you are sure."
-msgstr "贶眙 觌殛 邃 犴 暹篝 廨忉轱"
+msgid "Printer connection type"
+msgstr "札痫 簖礓弩 尻趱瘗艮"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Install List"
-msgstr "诉篝 陪赆糗篝狍珧"
+msgid "No network adapter on your system!"
+msgstr "腻 怦蓁珀 瘃矬狁祜爿狎 溟牯 篝 簖篝珈 筢!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"硼殡蓊翦 麸 狁麇唢 泷犰灬麸箦轳蒡 麸 赆糗腼泔 赆 贶眙 觌殛 篝 "
-"'旭矬柁赙'"
+msgid "Network %s"
+msgstr "倪牯躏 %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"旭轫 邈赆翎篝摅弭 糸 泷犰灬麸箦轳蒡, 忮忉轾桢唪  蓣弭 麸 溟赆啭灬 磲 "
-"贶礤翦 黢摅 狨酤 豉 泷犰灬麸箦轳 赆棹 赆 磲 糸 邈赆翎篝摅弭 篝镯 "
-"躔镫镢轶艮 筢騖n"
-"\n"
-"-甜锺暹翦 磲 邈赆翎篝摅弭 糸 泷犰灬麸箦轳蒡 赆盹黹贶. 渝 箴茼殄 "
-"疱耖痿彘, 彘觑黹贻 泷犰灬麸箦轳蒡 祓锺稞 磲 疳泾箫蹴 麸 孱躔珩弭玺 ."
+msgid "Malayalam"
+msgstr "提脶汩犭犰殛"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "缅黹觑 抨趱瘗糨"
+msgid "Option %s out of range!"
+msgstr "硼殡镢 %s 尻酎 锺唢!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "Connect %s"
+msgstr "育礓弩 %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "硼犴尻赀礴箸 XFS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "抨酏瘗箸/榆聩箸/受耵弪 柱麸泷狯辋 篝颸"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Duplicate mount point %s"
+msgstr "拈痣 箸戾唢 簖礓弩珧 %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "硼殡蓊翦 糸 弼狁祜爿 痫 栳 躔矬翮襁骘蹴 糸 泷犰灬麸箦轳蒡 :"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "犴 锺轶翦 磲, 尻糨脲箸 咫葶鼯 chkrootkit"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Connection Configuration"
+msgstr "氧桁唧彘 簖礓弩珧"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|Generic"
+msgstr "躲睐篝飢缅黹挈"
+
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
+"Linux\n"
"\n"
"\n"
-"\n"
-"<dchaumette\\@mandrakesoft.com>\n"
-"\n"
-"\n"
-" 缅黹贶 朵彘醆n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 缅黹贶 朵彘醆n"
-"\n"
-" 腌鲨蓓翎 缅黹贶 朵彘醆n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" 燥燧狎 Windows \n"
-"\n"
-"\n"
+" 拈徜哧趱颸n"
+" 歪 拈徜哧趱 槛閈n"
"\n"
"\n"
+" 歪閈n"
"\n"
+" 陪赆糗篝狍鏫n"
+" 蛾躐."
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "About"
-msgstr "绣襁"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Font List"
-msgstr "诉篝 民犰灬麸箦轳"
-
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Advanced Options"
-msgstr "旭秣珈蓓弪 硼殡镢蒡"
+msgid "Quit"
+msgstr "割镤矧"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "琉邈赆糗篝狍 民犰灬麸箦轳"
+msgid "Myanmar"
+msgstr "涕犴燔"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "宿 民犰灬麸箦轳 Windows "
+msgid "Auto allocate"
+msgstr "刘酎灬翮 赆翎盹燹"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "砰筢泫戕 民犰灬麸箦轳"
+msgid "Check bad blocks?"
+msgstr "鸽邈黠 汩 麽脶箪蓓 綮揿狒;"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "done"
-msgstr "想镪腌颃桤赍"
+msgid "Other MultiMedia devices"
+msgstr "峨脶 篚箨艴蒡 酗膈燧簌"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "xfs restart"
-msgstr "屦犴尻赀礴箸 xfs"
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(箦 狨酎 麸 扃鬈礴灬)"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Suppress Fonts Files"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
+"\n"
+" 抨趱瘗艮 箱玢\n"
+"\n"
+"\n"
+"\n"
+" 犴轺礤珀錦n"
+"\n"
+" 硼屙 蛾躐."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "硼犴尻赀礴箸 XFS"
+msgid "Authentication NIS"
+msgstr "虚篝镳镞珞 NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+" 屦殡镢 ``琉徙艴箸 屦殡镢 泷犰燹 屙麸朕'' 暹磲 荀耒篝 鼯襁 犍溟挈 "
+"瘃忉箸"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "type1inst building"
-msgstr "溏扉秕胥哚 type1inst"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "pfm fonts conversion"
-msgstr "戾翎赳镳 泷犰灬麸箦轳 pfm"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "ttf fonts conversion"
-msgstr "戾翎赳镳 泷犰灬麸箦轳 ttf"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr "体翎赳镳 民犰灬麸箦轳"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "曙轫 育礓弩 拈徜殛酏秕 屙羼泔痫殓燧礴"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr " 邈赆糗篝狍珧 True Type 镫镪腌颃桤赍"
+msgid "Card IO_0"
+msgstr "IO_0 贶耵狎"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "疳襻赆膻 疱耖燧礤翦 赆糗 麸 ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "琼蓓 榴徕殛 澎轳荇"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "陪赆糗篝狍 泷犰灬麸箦轳 True Type"
+msgid "Card IO_1"
+msgstr "IO_1 贶耵狎"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr "另糸泷狯 民犰灬麸箦轳"
+msgid "Thailand"
+msgstr "葬茼溏"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "另徭摁珞 泷犰灬麸箦轳 篝珥 脒篝 邈赆糗篝狍珧"
+msgid "Routers:"
+msgstr "鸟镬镫镢玺蒡:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "溴 怦蓁珀 赆爝 泷犰灬麸箦轳躙n"
+msgid "Kazakhstan"
+msgstr "梳驷牦糗"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "吾磲屦殡蓊翦 糸 簌篝蒡 泷犰灬麸箦轳蒡"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
+msgstr ""
+"另犴甍箸 脒篝狎 尻趱瘗酤 ( 汩 磲 屐鲠磉箦 秕 麸躜 溟徼蒹殪秕 "
+"狃镬彡聃箪蓓秕 尻趱瘗糨)"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "溴 怦蓁珀犴 泷犰灬麸箦轳蒡 篝轵 瘃矬狁翮燧礤 赆翎綮摅彘"
+msgid "Mandrake Linux Installation %s"
+msgstr "陪赆糗篝狍 Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "溴 怦蓁珀犴 泷犰灬麸箦轳蒡"
+msgid "Thai keyboard"
+msgstr "葬犴漭骈觑"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "犴茈躞  豉 泷犰灬麸箦轳"
+msgid "Dialup options"
+msgstr "硼殡镢蒡 育礓弩珧"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "祥 狃镥痖脲沆蓓弪 泷犰灬麸箦轳蒡 邈赆翎篝荑珀犴"
+msgid "Bouvet Island"
+msgstr "娃箫 甜秕廨"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "另徭摁珞 邈赆翦篝珈蓓 泷犰灬麸箦轳"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"梳膻 锺唧狒 篝 羼汜脲唢 颀桁轶珧 翮 曙轫掾 育礓弩珧 麸 拈徜殛酏秕!\n"
-"\n"
-"%s\n"
+"岭脶戕 Cd-Rom!\n"
"\n"
-"受眙 觌殛 篝 妖桁轶 汩 磲 铄觊磙箦翦 麸 镤玢 邈赆糗篝狍珧."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "妖桁轶 曙轫掾 簖礓弩珧 拈徜殛酏秕"
+"嗅襻赆膻 彘筌沐翦 麸 Cd-Rom 戾 镬 \"%s\" 篝镯 镤玢 筢 赆 疳艮篝 "
+"彭糗铄.\n"
+"跑 溴 麸 蓣弭, 疳艮篝 陵 汩 狃秭蹉 邈赆糗篝狍珧 狃 狨酎 麸 CdRom."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr " 曙轫 育礓弩 拈徜殛酏秕 溴 蓣彘 聃桁轶翦 痫糨."
+msgid "Polish"
+msgstr "酗膣黹挈"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr " 颀桁轶 蓣彘 掬 氵礤, 赆 狨艮 翮 篝殂燹 暹磲 屙羼泔痫殓燧礴."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr " 颀桁轶 蓣彘 掬 氵礤, 犭胲 狨艮 翮 篝殂燹 暹磲 狃屙羼泔痫殓燧礴."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-倪牯躏 燧簌 webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"茧 蓣秕 聃桁轶翦.\n"
-"甜锺暹翦 酤襻 磲 祜轳苕弩翦 翮 簖礓弩 筢 篝 拈徜哧趱 戾 茈腼躜 "
-"躔镫镢轶糨 篝 麸痖挈 筢 溥牯躏, 戾 翮 黢摅 狨酎灬翮 颀桁轶珧 溟牯 "
-"(DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "旭腌灬 赆糗 翮 邈赆糗篝狍 麸 疳贻麸 %s"
+"腻 怦蓁珀 瘃矬狁祜爿狎 溟牯 Ethernet 篝 簖篝珈 筢. 嗅襻赆膻 "
+"黢珞殪镳镩暹篝 麸 瘃襻祆 颀桁轶珧 蹼殛稞."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "妖桁轶, 邈赆糗篝狍 腼汩箪殛稞, 尻赀礴箸 孱躔珩弭玺..."
+msgid "Netmask"
+msgstr "誊箨 溟牯"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "妖桁轶..."
+msgid "No hard drives found"
+msgstr "腻 怦蓁珀犴 溥箨镩!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "虚栳磙 溟痣掾 溟妪桴眢珧 LAN 篝珥 赳蓣秕筢 颀桁轶 麸 %s!\n"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "燥 燥痖挈 倪牯躏 溴 翦脲辋礤 戾 `.0', 翦耢狒轶禳."
+msgid "2 buttons"
+msgstr "凝 痣揸赳"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "硼犴狁扉箸 溟屦狯掾 赆 麸 孱躔珩弭玺 DHCP"
+msgid "What kind is your ISDN connection?"
+msgstr "蚤 暹滹躜 暹磲 ISDN 簖礓弩 筢;"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr " 燧汩篝 爝箬 (箦 溴豸羼屦翎)"
+msgid "Label"
+msgstr "鹏殛蒴"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr " 瘃镪徼锺轶燧礴 爝箬 (箦 溴豸羼屦翎)"
+msgid "Save on floppy"
+msgstr "琉镨揸艴箸 箦 溟箨蒴"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "To 轱 翦耢狒轶祜 DHCP"
+msgid "Printer auto-detection"
+msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "To 轱 尻赀礴箸 DHCP"
+msgid "Which of the following is your ISDN card?"
+msgstr "酗獒 狃 糸 疳襻贶豉 贶耵弪 ISDN 暹磲 溟觊 筢;"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "燥 弩羼殛 镬 麸燧"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"燥 NFS 暹磲 蓓 溏祜鲩胼 瘃镫腼 汩 麸 溟犰镩襻箪 狁麇啭 箦 \n"
+"溥牯踽 TCP/IP. 刘艮 躔珩弩哚 瘃矬鲚皴 脲轸秕胥咤 孱躔珩弭玺, \n"
+"镳镞矧 聃桁哝弭衢 狃 麸 狁麇唢 /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DNS Server IP"
-msgstr " IP 麸 孱躔珩弭玺 DNS"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(刘艮 翮) IP 麸 孱躔珩弭玺 DHCP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> 隅.:扉 弭殛蒴 茈脶铄:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+msgid "Number of capture buffers:"
msgstr ""
-"妖桁轶 蓬躔珩弭玺 DHCP\n"
-"\n"
-"配 祓锺暹翦 屦殡蓊弭 糸 溟荟锺弪 屦殡镢蒡 篝 颀桁轶 麸 孱躔珩弭玺 "
-"DHCP\n"
-"另 溴 钶皴翦 糸 箸灬唔彘 狨酎, 狃胲 狯摅翦 麸  蓣彘\n"
-"\n"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "燥痖贽 溟妪桴眢 溟牯"
+msgid "Your choice? (0/1, default `%s') "
+msgstr " 屦殡镢 筢; (0/1, 孱 锺轶祜 %s)"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"甜锺 磲 犟狒摅 糸 赳蓣秕箦 聃桁唧彘 赆 磲 躔镨蒹  掬 蓣彘 "
-"聃桁轶翦 孱躔珩弭玺掾 DHCP, 疳襻赆膻 咫葶铘 遘 蓣 溟徕荏彘 簌篝 麸 "
-"倪牯躏 痫 黢珞殪镳镩暹翦 汩 麸 麸痖挈 筢 溥牯躏, 溴 栳 疱轳茴 栳 "
-"犭胲铢 糸 聃桁唧彘 麸 孱躔珩弭玺 DHCP.\n"
"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 硼屙颸n"
+"\n"
+" 旭镧泔屙颸n"
+" 磔 Linux\n"
+"\n"
+" 瞄 旭秣珈蓓秕騖n"
+"."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "冕腚殛"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "泽蓣殛 (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "另喵礤躞 蹼殛稞 箦 孱蓦轭"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "吁箨艴 拈牯"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "绣襁腌"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"择蓣秕箦 聃桁唧彘 麸 %s':\n"
-"\n"
-"倪牯躏: %s\n"
-"拈妪桴眢 IP : %s\n"
-"IP attribution: %s\n"
-"箱玢: %s"
+"(嗅褴腚珉弪 椠皴: /dev/lp0, /dev/lp1, ..., 犴暨篝镩麇 豉 LPT1:, "
+"LPT2:, ..., 1矧 尻趱瘗艮 USB: /dev/usb/lp0, 2矧 USB 尻趱瘗艮: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "妖桁轶 赳蓣秕筢 溟屦狯掾"
+msgid "Next"
+msgstr "硼屙"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "旭镡镫 翮 赳蓣秕筢 颀桁轶珧 溟屦狯"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "腻 祓锺暹翦 磲 邈赆翎篝摅弭 麸 瘃襻祆 尻赀礴箸 箦 赆糗綮珞 %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "槛 (禳盹 汩 彘溟觑)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "刘酎灬翮 屦犴狁扉箸"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"旭镥殇镳镞珞, 瘃矬狁祜爿狎 溟牯 (%s) 蓣彘 掬 颀桁轶鏫n"
"\n"
-"容脲翦 磲 钺磲聃桁轶翦 狨酎灬翎 ;\n"
+" 梳膻 像唧狒錦n"
"\n"
-"甜锺暹翦 磲 麸 贶礤翦 赆 禳盹 筢 犭胲 瘃蒺彘 磲 钶皴翦 糸 贶礤翦."
+"祥 疳褴戾赳镩 汩 翮 狨酎灬翮 邈赆糗篝狍 躔荞黠蹴 篝 綮揿狒 狁轶翦褴"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr " 溟屦狯 拈牯 蓣彘 掬 聃桁轶翦"
+msgid "Puerto Rico"
+msgstr "酗踺耵 堰觑"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"嗅襻赆膻 屦殡蓊翦 糸 瘃矬狁祜爿狎 溟牯 栳 篚礓彖暹 篝 麸痖挈 筢 溥牯躏."
+"麸 疳贻麸 'ImageMagick' 暹磲 狃狁徇翮麸 汩 翮 镫镪朕聩箸 翮 颀桁轶珧.\n"
+"受眙 觌殛 篝 \"彭糗铄閈" 汩 磲 邈赆翎篝摅弭 麸 \"蛾躐颸" 汩 蓊镤"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "碎栾踽黹挈 \"number row\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"震荞麇 禳盹 蓓狎 聃桁轶燧盹 瘃矬狁祜爿狎 溟牯 篝 簖篝珈 筢:\n"
+"葬 疳襻贶豉 疳贻翎 栳 狯衢皴栾 汩 磲 犴徕徼扉篝暹 麸 簖篝珈 筢: %s\n"
"\n"
-"%s\n"
"\n"
-"柔 聃桁轶翦 麸 燥痖挈 筢 倪牯躏 戾 狨酎 麸 瘃矬狁祜爿."
+"容脲翦 瘃徙灬糸贶 磲 狯衢褫篝 狨糗 翎 疳贻翎;\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "吁箨艴 溟牯"
+msgid "Anguilla"
+msgstr "零赀脶"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"腻 怦蓁珀 瘃矬狁祜爿狎 溟牯 Ethernet 篝 簖篝珈 筢. 嗅襻赆膻 "
-"黢珞殪镳镩暹篝 麸 瘃襻祆 颀桁轶珧 蹼殛稞."
+msgid "NIS Domain"
+msgstr "燥燧狎 NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "腻 怦蓁珀 瘃矬狁祜爿狎 溟牯 篝 簖篝珈 筢!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- 榴麇哚 遵珞酤:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "拈屦狯 %s"
+msgid "Antarctica"
+msgstr "另翎耜糸贽"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "拈屦狯 %s (黢摅 狁桉狒矧 %s)"
+msgid "Mount options"
+msgstr "硼殡镢蒡 簖礓弩珧"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "吁箨艴 拈牯"
+msgid "Jamaica"
+msgstr "枣犰荛赆"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"像轶禳 raw 篚箨艴  block 篚箨艴 ( 赆翎綮摅彘 箨腌颃韁n"
+"溥箨), 汩 翮 黢摅 麸躜 狃 弼狁祜爿  Oracle 篚箨艴蒡 DVD"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"旭彘翎 磲 聃桁唧弭 麸 躔镫镢轶艮 筢 汩 磲 祜轳苕弭衢 翮 簖礓弩 麸 "
-"篝 拈徜哧趱.\n"
-"体 狨艮 翮 漉磲酎翮翎 茈腼 躔镫镢轶糨 篝 麸痖挈 筢 溥牯躏 栳 祓锺稞 "
-"磲贶盹蹴 黢摅 翮 簖礓弩珧 狨麸 麸 躔镫镢轶艮 篝 拈徜哧趱.\n"
-" \n"
-"洛忉轾桢唪  蓣弭 聃桁唧彘 麸 倪牯躏/旭忉箸 拈徜殛酏秕 戾 翮 黢摅 麸 "
-"drakconnect 瘃轫 瘃秣摅弭.\n"
-"\n"
-"隅. 柔 瘃蒺彘 磲 蓣弭 扉 贶耵 溟牯 汩 磲 聃桁唧弭 麸 燥痖挈 筢 "
-"倪牯躏 (LAN)."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "曙轫 育礓弩 拈徜殛酏秕"
+msgid "Please wait, preparing installation..."
+msgstr "嗅襻赆膻 疱耖燧礤翦, 瘃镥麸殪狍哚 邈赆糗篝狍珧..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr " 曙轫 育礓弩 篝 拈徜哧趱 酤襻 屙羼泔痫檗桤赍."
+msgid "Czech (QWERTZ)"
+msgstr "泽蓣殛 (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "彭羼泔痫哏箸 孱躔珩弭玺..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
+"另徭摁珞 翎豸玺狎 翮 贶耵狎 溟牯 (黢摅殪 汩 鲲耒麸 躔镫镢轶糨)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "荜躐"
+msgid "The port number should be an integer!"
+msgstr " 狁殍禳 椠襻 瘃蒺彘 磲 暹磲 彡蓠衢矧 狁殍禳!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "屦犴狁扉箸"
+msgid "You must choose an image file first!"
+msgstr "旭蒺彘 磲 屦殡蓊翦 瘃 扉 彘挈磲!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "屙羼泔痫哏箸"
+msgid "Restore from Hard Disk."
+msgstr "硼犴狯锺 狃 麸 箨腌顸 溥箨."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-" 颀桁轶 翮 觑轫掾 黢摅珧 溟徜殛酏秕 蓣彘 掬 氵礤.\n"
-"胚磲 狃屙羼泔痫殓燧礴.\n"
-"\n"
-"蚤 栎脲翦 磲 贶礤翦:"
+msgid "Add to LVM"
+msgstr "旭矬柁赙 篝 LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "曙轫 育礓弩 拈徜殛酏秕 狃屙羼泔痫殓燧礴"
+msgid "DNS server"
+msgstr "蓬躔珩弭玺掾 DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr " 曙轫 育礓弩 拈徜殛酏秕 酤襻 狃屙羼泔痫檗桤赍."
+msgid "Trinidad and Tobago"
+msgstr "择轫轫糗眙 赆 燥祓茔觑"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "琉屙羼泔痫哏箸 孱躔珩弭玺..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "燥 LPD 赆 麸 LPRng 溴 躔矬翮襁骘蹴 尻趱瘗糨 IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "狃屙羼泔痫哏箸"
+msgid "simple"
+msgstr "狃朦"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-" 颀桁轶 翮 觑轫掾 簖礓弩珧 麸 拈徜殛酏秕 蓣彘 掬 氵礤.\n"
-"刘艮 翮 篝殂燹 暹磲 屙羼戕.\n"
-"\n"
-"蚤 栎脲翦 磲 贶礤翦;"
+msgid "Clear all"
+msgstr "梳栳耖箪 "
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "曙轫 育礓弩 拈徜殛酏秕 屙羼泔痫殓燧礴"
+msgid "No test pages"
+msgstr "座襁 滹觊灬篝殛蒡 箦脒溴"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "缩疖灬, 躔矬翮襁骘眙衢 禳盹 镩 瘐褶礤 2.4"
+msgid "Adapter %s: %s"
+msgstr "旭矬狁祜爿狎 %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"腻 怦蓁珀 疱耖玢玺掾 篝 簖篝珈 筢, 嗅襻赆膻 邈赆翎篝摅翦 蓓犴 犴 栎脲翦 "
-"磲 疱耖玢玷暹翦 篝 簖篝珈 怙掼彘狎"
+msgid "Falkland Islands (Malvinas)"
+msgstr "娃箫 筑觌犴 (提脞唔弪)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
-msgstr "容箸"
+msgid "Unknown model"
+msgstr "躲睐篝 祜眙蓦"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "group :"
-msgstr "镬茕 :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "犴 锺轶翦 磲, 蓦邈黠 豉 狁麇啭/赆翎朦泫 汩 邈泷狯 狃 秕."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "虚篝镳镞珞"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "黢摅翮 :"
+msgid "Backup Now"
+msgstr "另暨泷狯 狍鲠脲哚 轧襻"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "硼殡镢 容箸"
+msgid "/_File"
+msgstr "/_榴麇唢"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "犴 屦殡邈暹, 殇轱牯摁珧 赆 镬茕 溴 栳 犭胲铒蹴"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "眠礤翎 狯徇皴箸 麸 尻趱瘗艮 狃 麸 Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "遵摅 id 镬茕狎 汩 尻糨脲箸"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"抨赀礴箸 疳贻麸 鲞媵耧 汩 麸 瘐褶磲 Linux 翮 箦轳茯 2.2, 汩 翮 "
+"颀桁轶鏫n"
+"屙 燥喵秕 旭矬翎筮狎 痫 栳 瘃矬翎翦 麸 扃鬈礴燔 筢 狃 溟牯踽贻 "
+"屦殍蒹彘."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "遵摅 id 赆酎黠 汩 尻糨脲箸"
+msgid "Tamil (ISCII-layout)"
+msgstr "葬扉腴挈 (溟荇犷 ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
+msgid "Mayotte"
+msgstr "提汩"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "像轶禳 GID"
+msgid "Creating auto install floppy..."
+msgstr "溺扉秕胥哚 溟箨蒴狎 狨酎灬翮 邈赆糗篝狍珧..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr "像轶禳 UID"
+msgid "Searching for scanners ..."
+msgstr "眠礤翎 犴徭摁珞 汩 筢聩糨 ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Partitioning"
+msgstr "梳翎戾耖箪"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr "射辄翮翎"
+msgid "Russia"
+msgstr "样筮"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "拈赆辋灬翎"
+msgid "ethernet card(s) detected"
+msgstr "犴轺礤珀犴 贶耵(弪) ethernet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "择蓣镯 黢摅翮"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "犴徭摁珞"
+msgid "Can't create catalog!"
+msgstr "龄狒 溏扉秕胥哚 赆翎朦泔!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "屦孱羼汜筮"
+msgid "Not enough free space for auto-allocating"
+msgstr ""
+"腻 躔荞麇 狁赍酎 咫妪桢耧 齄耧 汩 翮 狨酎灬翮 溏扉秕胥哚 磔 "
+"赆翎綮摅妁"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "拈徙襻鲛 屦殡邈燧盹 赆睃磲"
+msgid "Set root password"
+msgstr "戍溟挈 瘃忉箸 root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"腻 躔荞麇 沩酎 屙犭脶牯殛 镤玢 OSS/ALSA 汩 翮 贶耵 搠秕 筢 (%s)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "delete"
-msgstr "溟徙襻鲛"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"体糗 翮 犭脶戕 戾爿栾躜 篝珥 赆糗綮珞 %s,  翎 溴滹燧磲 箦 狨艮 翮 "
+"赆糗綮珞 栳 麽栾"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "旭矬柁赙 磔秕 赆睃磲 篝 糨腼"
+msgid "Internet connection configuration"
+msgstr "妖桁轶 簖礓弩珧 拈徜殛酏秕"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "add a rule"
-msgstr "旭矬柁赙 屙 赆睃磲"
+msgid "Scanning for TV channels"
+msgstr "另徭摁珞 篝徼忐 翮脲狍珧"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "体翎赀礴箸 麸 屦殡邈燧盹 赆睃磲 蓓 屦唣邃 贶豉"
+msgid "Kernel:"
+msgstr "絮褶磲:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Down"
-msgstr "受豉"
+msgid "/_About..."
+msgstr "/_喻弭殛 戾..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "体翎赀礴箸 麸 屦殡邈燧盹 赆睃磲 蓓 屦唣邃 疖睐"
+msgid "Bengali"
+msgstr "洛沣犭殛"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr "熊睐"
+msgid "Preference: "
+msgstr "旭雉哽珞: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "屦殡蓊翦 麸 狁麇唢 perm 汩 磲 麸 溴唪/屦孱羼汜篝暹翦"
+msgid "Wizard..."
+msgstr "箱玢..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"燥 Drakperm 黢珞殪镳镩暹翎 汩 磲 溴唪 翎 狁麇哚 痫 黢彘苕弩翦 汩 磲 "
-"鲷檐铄翦 溟赆辋灬翎, 殇轱牯摁弪 赆 镬茕弪 戾 麸 msec.\n"
-"硼唧珧 祓锺暹翦 磲 屦孱羼汜篝暹翦 麸躜 溟觑 筢 赆睃礤 痫 栳 "
-"犴糸赆翎篝摅秕 麸躜 瘃镥痖脲沆蓓秕 赆睃礤."
+msgid "Services: %d activated for %d registered"
+msgstr "震珩弩咤: %d 屙羼泔痫殓燧礤 汩 %d 邈沐泷犰燧礤"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "permissions"
-msgstr "溟赆辋灬翎"
+msgid "Create a bootdisk"
+msgstr "拈箨蒴 尻赀礴箸"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "group"
-msgstr "o燔溽"
+msgid "Solomon Islands"
+msgstr "娃箫 语腼忐眙矧"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "user"
-msgstr "黢摅翮"
+msgid "(module %s)"
+msgstr "(荞桉 %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "栎箸"
+msgid "Workgroup"
+msgstr "响茕 羼汜筮狎:"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "容箸 麸 狁麇唢 auto_install.cfg"
+msgid "Printer host name or IP"
+msgstr "拈牯踽挈 镬 尻趱瘗艮 IP"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Path or Module"
+msgstr "育篝珈"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"嗅襻赆膻 溏膻篝 翮 栎箸 麸 狁麇唢 auto_install.cfg file is located.\n"
-"\n"
-"瘤摅翦 麸 赍睃 犴 溴 栎脲翦 磲 贶礤翦 黢摅 翮 狨酎灬翮 邈赆糗篝狍珧.\n"
-"\n"
+"燥 镬 麸 尻趱瘗艮 瘃蒺彘 磲 疱耖蓣彘 禳盹 泷莒灬翎, 狁殍祜 赆 麸 "
+"麽襻牯揆 underscore"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"腻 怦蓁珀犴 彘挈礤 CD DVD, 疳襻赆膻 犴糸泷茗翦 麸 瘃襻祆 邈赆糗篝狍珧 "
-"赆 翎 狁麇哚 rpm."
+msgid "Show current interface configuration"
+msgstr "旭镡镫 翮 赳蓣秕筢 颀桁轶珧 溟屦狯"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "腻 怦蓁珀 彘挈磲"
+msgid "Development"
+msgstr "另莛趱铉"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "陪赆糗篝狍 赆翎朦泔 彘挈磲"
+msgid "Done"
+msgstr "想镪腌颃桤赍"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"嗅襻赆膻 溏膻篝 翮 栎箸 痫 栳 暹磲 瘃矬廛箝扃 彘挈磲 邈赆糗篝狍珧.\n"
-"\n"
-"另 溴 蓣弭 蓓犴 躔荞黠 赆糗腼泔, 疳襻赆膻 犴糸泷茗弭 翎 疱耖鬻屙 麸 "
-"CD or DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "蓬躔珩弭玺掾 审麸箦脒澌"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr " 翦脲豸徇 ip 麸 DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\t座襁 麸 榴麇唢 吁篝揿狒矧\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr " IP 尻赀礴箸 麸 DHCP"
+msgid "Chile"
+msgstr "组朕"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-" 孱躔珩弭玺掾 DHCP 栳 屦轸褫疱 茈腼躜 躔镫镢轶糨 磲 铄觊盹 戾 翮 黢摅 "
-"麸 PXE 戾 扉 滹桢唧 溟妪桴眢鏫n"
+"祥 镤玢镞 豉 尻趱瘗酤 戾胲礴 痫 疳褫黠眙衢 狃 翮 Lexmark 躔矬翮襁骘蹴 "
+"禳盹 麸痖觑 尻趱瘗糨, 溴 躔矬翮襁骘蹴 尻趱瘗糨 箦 狃镬彡聃箪蓓秕 "
+"躔镫镢轶糨 孱躔珩弭玺蒡 尻趱瘙箦. 嗅襻赆膻 篚礓蒹翦 麸 尻趱瘗艮 筢 箦 "
+"扉 麸痖贽 椠襻 聃桁唧翦 麸 篝 扃鬈礴灬 痫 暹磲 篚礓邃屐蓓矧."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-" 溟妪桴眢 溟牯 暹磲 %s 戾 黢摅 燔箨 溟牯%s.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"篚箨艴轡n"
"\n"
+" 想镪腌颃桤赍 篚箨艴!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "拈屦狯 %s (篝 溥牯躏 %s)"
+msgid "(already added %s)"
+msgstr "(麸 %s 蓣彘 掬 瘃矬翦桢)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"嗅襻赆膻 屦殡蓊翦 痫獒 溟屦狯 溟牯 栳 黢珞殪镳镩摅弭 汩 麸 "
-"孱躔珩弭玺 dhcp."
+msgid ", using command %s"
+msgstr ", 戾 翮 屙麸朕 %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "葬豸耧磲 翎 痣揸赳 Alt 赆 Shift"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
msgstr ""
-"旭彘翎 磲 聃桁唧翦 麸 躔镫镢轶艮 筢 汩 翮 邈赆糗篝狍 麸 溟彡镬轶艮 "
-"PXE  孱躔珩弭玺 DHCP \n"
-"赆 溟彡镬轶艮 TFTP  溟彡镬轶艮 邈赆翎篝荏妁.\n"
-"体 狨艮 翮 屦殡镢, 茈腼 躔镫镢轶糨 篝 麸痖挈 筢 溥牯躏 栳 祓锺稞 磲 "
-"邈赆翎篝徼稞 戾 翮 黢摅 狨麸 麸 躔镫镢轶艮.\n"
-"\n"
-"洛忉轾桢唪  蓣弭 聃桁唧彘 翮 瘃忉箸 篝 倪牯躏/拈徜哧趱 戾 翮 黢摅 "
-"麸 drakconnect 瘃轫 瘃秣摅弭.\n"
-"\n"
-"隅. 柔 瘃蒺彘 磲 蓣弭 扉 贶耵 溟牯 汩 磲 聃桁唧弭 麸 燥痖挈 筢 "
-"倪牯躏 (LAN)."
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "陪赆糗篝狍 氧桁唧妁 拈彡镬轶艮"
+msgid "Add/Del Users"
+msgstr "旭矬柁赙/瘤徇皴箸 遵珞酤"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "氧桁唧彘 拈彡镬轶艮 PXE"
+msgid "Host/network IP address missing."
+msgstr "隋唣彘 溟妪桴眢 麸 震镫镢轶艮/拈牯."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "嗅襻赆膻 疱耖燧礤翦, 锺哝镯翎 镩 屦殡镢蒡 狍鲠脲哚..."
+msgid "weekly"
+msgstr "邂滹灬溟徇"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "嗅襻赆膻 疱耖燧礤翦, 聃桁哝弭衢 麸 屦唣邃 狍鲠脲哚..."
+msgid "Settings"
+msgstr "氧桁唧彘"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Periodic Checks"
-msgstr "绣耖镤殛镞 鸽邈黠"
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "System Options"
-msgstr "硼殡镢蒡 吁篝揿狒矧"
+msgid "Here is the full list of available countries"
+msgstr "刘艮 暹磲 痣揆珧 脒篝 豉 溟徼蒹殪 鼯颃"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "硼殡镢蒡 拈牯"
+msgid "Alternative test page (A4)"
+msgstr "彭犭脶牯殛 滹觊灬篝殛 箦脒溽 (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"祥 疳襻贶豉 屦殡镢蒡 狍鲠脲哚 祓锺稞 磲 屦殡邈稞韁n"
-"汩 翮 瘃矬狁祜戕 翮 狍鲕脲獒. 瞄 屦孱玢摅彘 溴唪 翮 怙掼彘.\n"
+"跑 蓣弭  翎 疳襻贶豉 CDs, 疳艮篝 彭糗铄.\n"
+"跑 溴 蓣弭 赆磔磲 狃 翎 疳襻贶豉 CDs, 疳艮篝 陵.\n"
+"跑 溴 蓣弭 贶痫獒 狃 狨糗, 狃镥痖胼铘 翎 赆 疳艮篝 彭糗铄."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "拈狩彘耖篝掾 馏鲠脲哚:"
+msgid "Wait please"
+msgstr "嗅襻赆膻 疱耖燧礤翦"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "砰滹痫檗箦轵 馏鲠脲哚:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "硼唣邃 狍鲠脲哚:"
+msgid "Backup user files"
+msgstr "另暨泷狯 狍鲠脲哚 狁麇啭 黢珞酤"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(旭镥痖脲沆蓓 糸燹: %s)"
+msgid "New"
+msgstr "洼"
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-"怎痖挈: 刘艮 暹磲 趱痖贽 狍鲕脲獒 痫 篚黹篝荇衢 箦 汩 躔镫镢轶艮 痫 栳 "
-"篚礓蒎翎 篝 拈徜哧趱  疱胲翮.\n"
+"Linux\n"
+" Root\n"
"\n"
-" 狰珉: 震荞黠蹴 贶痫轱 疱耖锺轶祜, 赆 尻翦腼翎 疱耖篌羼弪 "
-"狨酎灬麸 蓦邈黠 贶桢 怦茕.\n"
"\n"
-"狰珉羼: 狍鲕脲獒 暹磲 狁赍糗 貘珉 汩 磲 贶礤翦 麸 簖篝珈 "
-"孱躔珩弭玺掾 痫 祓锺暹 磲 溴黥暹\n"
-" 篚礓蒹彘 狃 痫腚稞 疱胲翦. 另 麸 扃鬈礴灬 暹磲 禳盹 "
-"疱胲翮 篝 拈徜哧趱, 屦殡蓊翦\n"
-" 麸 麽扃朦翦耧 屦唣邃颸n"
"\n"
-" 嗅襻盹 屦唣邃: 检镩 戾 麸 疳襻疖睐 屦唣邃, 犭胲 戾 麸 簖篝珈 屙翦膻 "
-"觌彘篝 赆 戾 糸 屦殡镢蒡\n"
-" 狍鲠脲哚 篝 燧汩篝颸n"
"\n"
-"拈狩彘耖篝掾 馏鲠脲哚:\n"
-" 另 蓣彘 屦殡邈暹 麸 '砰滹痫檗箦轵 馏鲠脲哚' 酎翦 栳 "
-"狃矬糨腚镯翎 彘滹痫檗箦轵 狍鲠脲哚 篝镯 黢摅翮 (镬 黢摅翮\n"
-" 珉尻赳镯殛 燹眭灬)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
"\n"
+" Linux\n"
"\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+" 箸灬眙殛黒n"
"\n"
"\n"
"\n"
-"隅戾啭箸: 另 蓣弭 贶耵 搠秕 ISA PnP, 栳 瘃蒺彘 磲 尻翦胼箦翦 麸 瘃襻祆 "
-"sndconfig. 琉胲 泷茗翦 \"sndconfig\" 箦 扉 觑眢."
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
-"You can visit our hardware database at:\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"腻 怦蓁珀 篚箨艴 受耵狎 '棍秕 篝 扃鬈礴燔 筢. 嗅襻赆膻 忮忉轾桢唪  "
-" 躔矬翮耖纥戾礴 受耵 棍秕 筢 暹磲 簌篝 麸痫桢翮燧礴.\n"
"\n"
"\n"
-"甜锺暹翦 磲 屦轶赍鲷暹翦 翮 廛箸 溴滹燧睐 蹼殛稞 篝:\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"\n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾 瞄 旭秣珈蓓秕騖n"
+"\n"
+" LDAP NIS 燥燧狎 Windows 燥燧狎\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 槛 拈徜哧趱颸n"
+"."
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "腻 怦蓁珀 受耵 棍秕!"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
+msgstr ""
+"屦唣邃颸n"
+" 屦唣邃颸n"
+"\n"
+" 拈徜哧趱 屦唣邃颸n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 孱' 锺轶祜."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s 旭镥痖箨珞 (%s)Bootsplash"
+msgid "Load from floppy"
+msgstr "贮耵 狃 溟箨蒴"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "溺扉秕胥哚 瘃镥痖箨珞珧 ..."
+msgid "The following printer was auto-detected. "
+msgstr "祥 疳襻贶豉 尻趱瘗糨 怦蓁珀犴 狨酎灬翎."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "旭蒺彘 磲 屦殡蓊翦 瘃 扉 彘挈磲!"
+msgid "Boot Floppy"
+msgstr "拈箨蒴 抨赀礴箸"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "硼殡镢 黢狒矧 泷犰燹 瘃稂滹"
+msgid "Norwegian"
+msgstr "惋疋玢殛"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "刘酎 麸 栎灬 溴 蓣彘 彡 贶痫轱 bootsplash 篝 %s !"
+msgid "Searching for new scanners ..."
+msgstr "眠礤翎 犴徭摁珞 汩 磔秕 筢聩糨 ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "狃镨揸艴箸 栎灬麸 Bootsplash ..."
+msgid "Apache World Wide Web Server"
+msgstr "蓬躔珩弭玺掾 Apache World Wide Web"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "choose image file"
-msgstr "硼殡蓊翦 扉 彘挈磲"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "屦殡蓊翦 彘挈磲"
+msgid "select path to restore (instead of /)"
+msgstr "屦殡蓊翦 翮 栎箸 屦犴狯锺茯 (犴暨 麸 /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "妖桁轶 彘挈磲 bootsplash"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "澎鲕黹箸 腼泓趱痫 篝珥 曙眢"
+msgid "China"
+msgstr "蔬磲"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "硼殡蓊翦 黢"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+" (洛忉轾桢唪  镩 镩 尻趱瘗糨 筢 暹磲 篚礓屐蓓镩 赆 箦 "
+"脲轸秕胥哚).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "A痫柁赍躞 栎灬麸"
+msgid "Georgia"
+msgstr "缅氵"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "旭镥痖箨珞"
+msgid "Reading data of installed printers..."
+msgstr "另茔睐箸 溴滹燧睐 豉 邈赆翦篝珈蓓 尻趱瘗酤..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "燥 黢 翮 泷犰燹 瘃稂滹"
+msgid " Erase Now "
+msgstr "逾摅殪 轧襻 "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "麸 矧 翮 泷犰燹 瘃稂滹"
+msgid "server"
+msgstr "孱躔珩弭玺掾"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "麸 痣荇矧 翮 泷犰燹 瘃稂滹"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "砰筌沐翦 扉 祜聆镳镩珈蓓 溟箨蒴 FAT 篝镯 镤玢 %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-"篚眙弭徙燧礴 y 翮 泷犰燹 瘃稂滹鮘n"
-"狃 翮 屦茼 狁轶翦褶 泫磉"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"篚眙弭徙燧礴 y 翮 泷犰燹 瘃稂滹鮘n"
-"狃 翮 屦茼 狁轶翦褶 泫磉"
+msgid "Please Wait... Applying the configuration"
+msgstr "嗅襻赆膻 疱耖燧礤翦... 碰狁祜戕 聃桁唧妁"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "矧 痣衢筮秕 赍殪蓓秕"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "痣荇矧 赍殪蓓秕"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"篚眙弭徙燧礴 y 麸 痣衢筮秕 赍殪蓓秕\n"
-"箦 狁殍禳 麽襻牯揆"
+msgid "SCSI controllers"
+msgstr "咫邈牯蒡 SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"篚眙弭徙燧礴 x 麸 痣衢筮秕 赍殪蓓秕\n"
-"箦 狁殍禳 麽襻牯揆"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "篝镯 孱躔珩弭玺 LPD \"%s\", 篝镯 尻趱瘗艮 \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "另徭摁珞"
+msgid "Choosing a display manager"
+msgstr "硼殡葶镯翎 蓓犴 溟狩彘耖篝 瘃镡镫掾"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "柬镬 栎灬麸"
+msgid "Zeroconf Host name"
+msgstr "拈牯踽挈 柬镬 Zeroconf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "翦腴贽 犴茈躞"
+msgid "IP address should be in format 1.2.3.4"
+msgstr " IP 溟妪桴眢 瘃蒺彘 磲 暹磲 箦 祜聆 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "瘃 廪灬 溏扉秕胥哚"
+msgid "Ecuador"
+msgstr "审珈羼轫"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"麸 疳贻麸 'ImageMagick' 暹磲 狃狁徇翮麸 汩 翮 镫镪朕聩箸 翮 颀桁轶珧.\n"
-"受眙 觌殛 篝 \"彭糗铄閈" 汩 磲 邈赆翎篝摅弭 麸 \"蛾躐颸" 汩 蓊镤"
+msgid "Add an item"
+msgstr "旭矬柁赙 篝镩麇唢"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"腻 怦蓁珀 贶耵 翮脲狍珧 篝 扃鬈礴燔 筢.嗅襻赆膻 忮忉轾桢唪  扉 "
-"躔矬翮耖纥戾礴 贶耵 篝 Linux 暹磲 篚礓屐蓓.\n"
-"\n"
-"\n"
-"甜锺暹翦 磲 屦轶赍鲷暹翦 翮 廛箸 溴滹燧睐 篝: \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"祥 尻趱瘗糨 箦 狨酎 麸 扃鬈礴灬 暹磲 溟徼蒹殪镩 箦 茈腼躜 躔镫镢轶糨"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "腻 怦蓁珀 贶耵 翮脲狍珧!"
+msgid "I can't find needed image file `%s'."
+msgstr "腻 祓锺 磲 怦 麸 狃狁徇翮麸 狁麇唢 彘挈磲 `%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "轧襻 祓锺暹翦 磲 尻翦胼箦翦 麸 xawtv (燧筢 狃 翎 Window!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"腻 怦蓁珀 贶耵 搠秕. 娘觊燔篝 麸 \"harddrake\" 戾糗 翮 邈赆糗篝狍"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "梳朕 筢 燧襻!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"狞桤赍 荜躐 柁襻: %s.\n"
+"燥 簌篝 鲲耢 暹磲 \"椠襻/tcp\" \"椠襻/udp\", \n"
+"秕 柁襻 暹磲 暹磲 狁殍禳 戾翎铨 1 赆 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "燥 XawTV 邈赆翎篝荑珀!"
+msgid "Shell"
+msgstr "蛛镩 (shell)"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "旭镪朕桤赍 篥茈灬 赆糗 翮 犴徭摁珞 篝徼忐 翮脲狍珧"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "另徭摁珞 篝徼忐 翮脲狍珧"
+msgid "Sao Tome and Principe"
+msgstr "榆 渣戾 赆 旭唔趔轲"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "眠礤翎 犴徭摁珞 篝徼忐 翮脲狍珧 ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "龄蹴犰哚 瘃矬疠脶箸 戾 麸 镬 黢摅翮 %s (胲栾 犍溟挈)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "绣耖秣:"
+msgid "Azerbaidjani (latin)"
+msgstr "伶羼祓狷翩茼 (酸糸黹挈)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "Package not installed"
+msgstr "燥 疳贻麸 溴 暹磲 邈赆翦篝珈蓓"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "眠礤翦 MandrakeExpert"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "梳膣溟彡 翮脲狍 Optus 翮 刘篝襻脒狎"
+msgid "American Samoa"
+msgstr "领羼殛犴殛 俞禳"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "洼 歧脶礓哚"
+msgid "Protocol"
+msgstr "旭镫腼"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "冕腚哚 [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "另糸泷狯 泷犰灬麸箦轳 篝 簖篝珈 筢"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "另狒镫殛 捧颃痃"
+msgid "Harddrake help"
+msgstr "嘛掼彘 Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "孽糸贽 捧颃痃"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "蔬磲 (屙彷耖)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "妖桁轶 麸 拈彡镬轶艮 藻耢狒殛稞 Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "舍瘗磉 (梳膣溟彡)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup 隋痿镬蓠彘弪 另狯锺茯\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "舍瘗磉 (屙彷耖)"
+msgid "Restore all backups"
+msgstr "硼犴狯锺  豉 犴糸泷荟 狍鲠脲哚"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "梳磲溟挈 (梳膣溟彡)"
+msgid "if set to yes, check open ports."
+msgstr "犴 锺轶翦 磲, 蓦邈黠 汩 犴镩黥蒡 椠皴."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "This may take a moment to erase the media."
+msgstr "后 黢彘狍麸 戾耖贶 脲痿 汩 磲 筲珞翦 麸 燧箫."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (赆膣溟彡)"
+msgid "You can't select/unselect this package"
+msgstr "腻 祓锺暹翦 磲 屦殡蓊弭/狃镥痖胼铄翦 狨酎 麸 疳贻麸"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (屙彷耖)"
+msgid "Warning"
+msgstr "旭矬秣"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"燥 XawTV 溴 暹磲 邈赆翦篝珈蓓!\n"
-"\n"
-"\n"
-"另 蓣弭 贶耵 早脲狍珧 犭胲 麸 DrakX 溴 翮 怦揸 (鼯襁 bttv\n"
-"module 篝 \"/etc/modules\") 赆 溴 邈赆糨篝珞 稞翦 麸 xawtv, 疳襻赆膻\n"
-"篝暹媵 翎 狃雉蓦弩灬 麸 \"lspcidrake -v -f\" 篝 \"install\\@mandrakesoft."
-"com\"\n"
-"戾 栎灬 \"undetected TV card\".\n"
-"\n"
"\n"
-"甜锺暹翦 磲 邈赆翎篝摅弭 麸 xawtv 戾 翮 屙麸朕 \"urpmi xawtv\" 筢韁n"
-"root, 狃 翮 觑眢."
+"- 峨脶 榴麇哚:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "瘃妪秕筢"
+msgid "Remote host name"
+msgstr "琉镬彡聃箪蓓 溟牯踽挈 镬"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "溴豸羼妪秕筢"
+msgid "deactivate now"
+msgstr "狃屙羼泔痫哏箸 酤襻"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"受眙 觌殛 箦 扉 篚箨艴 篝 狁轶翦顸 綮揿 汩 磲 溴唪 邃 糸 "
-"痣珩秭锺咤."
+msgid "access to X programs"
+msgstr "瘃忉箸 箦 瘃镢褴祆狒 "
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "躲睐篝"
+msgid "Computing the size of the Windows partition"
+msgstr "震镫镢哝弭衢 麸 燧沐栾 翮 赆糗綮珞珧 豉 Windows"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "躲睐篝"
+msgid "Italy"
+msgstr "婶犭哚"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "抨糨脲箸 麸 \"%s\"..."
+msgid "Name of printer"
+msgstr "柬镬 尻趱瘗艮"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "抨糨脲箸 羼汜脲唢 颀桁轶珧"
+msgid "disable"
+msgstr "狃屙羼泔痫哏箸"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "妖桁轶 狁桉狒矧"
+msgid "error unmounting %s: %s"
+msgstr "篥茈灬 赆糗 翮 狃矬溴箸 麸 %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "须珩秭锺咤"
+msgid "Do it!"
+msgstr "梳' 麸!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "针殛 痫 犴轺礤珀"
+msgid "Cayman Islands"
+msgstr "娃箫 瘦蹯犴"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "戈滹箸 Harddrake2 "
+msgid "%s not responding"
+msgstr "麸 %s 溴 犴翎痫犟唔弭衢"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "另喵礤躞 箦 孱蓦轭"
+msgid "Select model manually"
+msgstr "硼殡蓊翦 麸 祜眙蓦 麇轳镪唔玺"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "溺扉秕胥:"
+msgid "Format"
+msgstr "田聆镳镞珞"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"刘酎 暹磲 麸 HardDrake, 蓓 羼汜脲唢 颀桁轶珧 翮 Mandrake\n"
-"戈滹箸:"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "About Harddrake"
-msgstr "喻弭殛 戾 麸 Harddrake"
+" 痖 觑轫 赳矧 簖礓弩珧 adsl 暹磲 pppoe.\n"
+"像轶燧礤 篚礓蒹彘 黢珞殪镳镩稞 pptp, 贶痫殄 脒沐 dhcp.\n"
+"跑 溴 钶皴翦, 屦殡蓊翦 '黢摅 pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_喻弭殛 戾..."
+msgid "Various"
+msgstr "拈荟锺"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_另狯锺 Bug"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"厅腴 屦殡蓊弭 扉 篚箨艴, 栳 祓锺暹翦 磲 溴唪 糸 痣珩秭锺咤 箦 疱溥 "
-"痫 屐鲠磉骘眙衢 篝 溴钸 綮揿 戾 镬(\"须珩秭锺咤騖")"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Select a device !"
-msgstr "硼殡蓊翦 扉 篚箨艴 !"
+"\n"
+"\n"
+"燥 Printerdrake 溴 祓弩 磲 赆栾襁箦 麸 祜眙蓦 麸 尻趱瘗艮 %s. "
+"嗅襻赆膻 屦殡蓊翦 麸 簌篝 祜眙蓦 狃 翮 脒篝."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"绣耖泷狯 豉 疱溥:\n"
"\n"
+"硼殡蓊翦 麸躜 尻趱瘗糨 痫 栎脲翦 磲 戾翎鲚皴翦 赆 贶眙錦n"
+"觌殛 篝 \"体翎鲲褴\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "嘛掼彘 Harddrake"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_绣耖泷狯 绣溥"
+msgid "Albanian"
+msgstr "岭忉黹挈"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_嘛掼彘"
+msgid "Lithuania"
+msgstr "碎栾踽磉"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_割镤矧"
+msgid "Compact"
+msgstr "吁祓徙掾"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/彭麸痖箪 _镤玢 jazz"
+msgid "Detected model: %s %s"
+msgstr "埋蓁珀 麸 祜眙蓦: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/彭麸痖箪 _禳眙屐"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"刘酎 暹磲 麸 HardDrake, 蓓 羼汜脲唢 颀桁轶珧 翮 Mandrake\n"
+"戈滹箸:"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/彭麸痖箪 _尻趱瘗酤"
+msgid "Local files"
+msgstr "燥痖贶 狁麇哚"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_硼殡镢蒡"
+msgid "maybe"
+msgstr "唧"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "麸 镬 赆翎箨艴狍艮 麸 屦孱羼汜篝"
+msgid "Panama"
+msgstr "嗅磲燔"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 想镪腌颃桤赍?"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "麸 镬 赆翎箨艴狍艮 翮 篚箨艴掾"
+msgid "Monitor"
+msgstr "翔"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"燥燧狎 Windows 燥燧狎 Windows 孱躔珩弭玺掾 黢摅翮騖n"
+"\n"
+" 燥燧狎 Windows 孱躔珩弭玺掾\n"
+"\n"
+" 燥燧狎 Windows 孱躔珩弭玺掾 想镪腌颃桤赍\n"
+"\n"
+" 燥燧狎 Windows 孱躔珩弭玺掾 LPD Printerdrake\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr " 酏痫 翮 椠襻 篝珥 镳镞 暹磲 篚礓邃屐蓓 麸 痫眙哧 筢."
+msgid "65 thousand colors (16 bits)"
+msgstr "65 鏖腴茕弪 黢狒 (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
+"\n"
+"- 琉镨揸艴箸 篝镯 箨腌顸 溥箨 篝珥 栎箸: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "田眙蓦 忡灬糸箪稞"
+msgid "Size: %d KB\n"
+msgstr "梯沐栾: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the number of the processor"
-msgstr " 狁殍禳 麸 屦孱羼汜篝"
+msgid "Remove fonts on your system"
+msgstr "瘤徇皴箸 泷犰灬麸箦轳 狃 麸 簖篝珈 筢"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Processor ID"
-msgstr "葬豸玺 屦孱羼汜篝"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"旭镥殇镳镞珞, 瘃矬狁祜爿狎 溟牯 (%s) 蓣彘 掬 颀桁轶鏫n"
+"\n"
+"容脲翦 磲 钺磲聃桁轶翦 狨酎灬翎 ;\n"
+"\n"
+"甜锺暹翦 磲 麸 贶礤翦 赆 禳盹 筢 犭胲 瘃蒺彘 磲 钶皴翦 糸 贶礤翦."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "network printer port"
-msgstr "椠襻 尻趱瘗艮 溟牯"
+msgid "Graphical interface at startup"
+msgstr "民狯殛 疱耖廛腚镯 篝珥 尻赀礴箸"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the name of the CPU"
-msgstr "麸 镬 赆翎箨艴狍艮 麸 屦孱羼汜篝"
+msgid "Please enter the directory to save:"
+msgstr "嗅襻赆膻 锺唧翦 麸 赆糗腼泔 狃镨揸艴箸: "
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Name"
-msgstr "柬镬"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "诛耢 汩 溟箨蒴弪 痫 祓锺暹 磲 溴黥暹 镤玢"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr " 狁殍禳 豉 痣揸赳 麸 痫眙殛轱"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "腻 躔荞黠蹴 狁赍糨 赆翎綮摅彘 汩 RAID 屦轲蒌秕 %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "榴殍禳 痣揸赳"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"O 疳襻贶豉 尻趱瘗糨 蓣秕 聃桁轶翦. 受眙 溟痣 觌殛 箦 蓓犴 尻趱瘗艮 汩 "
+"磲 犭胲铄翦 糸 聃桁唧彘 麸, 磲 麸 锺唧弭  瘃镥痖脲沆蓓 汩 磲 "
+"瘃镡茈弭 痣珩秭锺咤 汩 狨酎."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "燥 屦唧珈 镬 赆翎箨艴狍艮 麸 屦孱羼汜篝"
+msgid "Connected"
+msgstr "吁礓蓁珀"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Model name"
-msgstr "柬镬 祜眙蓦秕"
+msgid "USB printer \\#%s"
+msgstr "尻趱瘗艮 USB \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "缅黹 麸 屦孱羼汜篝 (.. 8 汩 PentiumIII, ...)"
+msgid "Macedonian"
+msgstr "提赍滹黹挈 . ."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Model"
-msgstr "田眙蓦"
+msgid "Bridges and system controllers"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "hard disk model"
-msgstr "祜眙蓦 箨腌耧 溥箨秕"
+msgid "/File/_Save"
+msgstr "榴麇唢/琉颻柁赍躞"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "觌荏 翮 篚箨艴掾 "
+msgid "Mali"
+msgstr "誊腴"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Media class"
-msgstr "孰荏 梯箫"
+msgid "No details"
+msgstr "座襁 脲痿镬蓠彘弪"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Sub generation of the cpu"
-msgstr "Sub"
+#: ../../pkgs.pm:1
+#, c-format
+msgid "very nice"
+msgstr "痫臊 赆朦"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Level"
-msgstr "硼唣邃"
+msgid "Preview"
+msgstr "旭镥痖箨珞"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "Remote Control"
+msgstr "琉镬彡聃箪蓓矧 鸽邈黠"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Floppy format"
-msgstr "诛耢 拈箨蒴狎"
+msgid "Please select media for backup..."
+msgstr "嗅襻赆膻 屦殡蓊翦 麸 燧箫 汩 翎 犴暨泷狯 狍鲠脲哚..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "蓬躔珩弭玺掾 XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "旭矬柁赙/瘤徇皴箸 绣脶酤"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "缅氵 (\"瑶箝赙\" 溟荇犷)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "/_Options"
+msgstr "/_硼殡镢蒡"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "F00f bug"
-msgstr "遇茈灬 F00f"
+msgid "Your printer model"
+msgstr "燥 祜眙蓦 尻趱瘗艮 筢"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(旭矬秣!:受礤翦 黢摅 麸 XFS 篝珥 赆糗綮珞 root\n"
+" 溏扉秕胥哚 溟箨蒴 尻赀礴箸 戾爿栾躜 1.44 Mb 燔腚镯 栳 狃雉彘,\n"
+"屦彘滢 麸 XFS 黢彘苕弭衢 痫臊 戾丬腼躜 镤玢稞.)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
+"\n"
+"- 拈徙襻鲛 狁麇啭 tar 狃 麸 溥箨 戾糗 麸 犴暨泷狯 狍鲠脲哚.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
+"腻 怦蓁珀犴 彘挈礤 CD DVD, 疳襻赆膻 犴糸泷茗翦 麸 瘃襻祆 邈赆糗篝狍珧 "
+"赆 翎 狁麇哚 rpm."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Is FPU present"
-msgstr "燥 FPU 暹磲 疳顸"
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "妖桁轶 麸 拈彡镬轶艮 藻耢狒殛稞 Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "Save"
+msgstr "琉镨揸艴箸"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Fdiv bug"
-msgstr "遇茈灬 Fdiv"
+msgid "The %s is unsupported"
+msgstr "燥 %s 溴 躔矬翮襁驽翎"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "贮耵 豉 镤玢 汩 糸 usb 篚箨艴蒡 筢."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "Disk"
+msgstr "倪箨矧"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "麸 荞桉 麸 瘐褶磲 GNU/Linux 痫 麇轳哝弭衢 翮 篚箨艴"
+msgid "Enter a printer device URI"
+msgstr "砰筌沐翦 篚箨艴 尻趱瘗艮 URI"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
+#, fuzzy, c-format
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
+msgstr "磔 Linux"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "恶桉"
+msgid "Israel"
+msgstr "审襻揠"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "溏扉秕胥掼珀 磔 漉磲扉贽 篚箨艴 狃 麸 赍眙耖挈 瘐褶磲 devfs"
+msgid "French Guiana"
+msgstr "冕腚殛 蔑蹰茼"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "洼 篚箨艴 devfs"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "疳脶檐 篝狒殛 镬 篚箨艴掾 麸 疳贻麸 dev"
+msgid "add a rule"
+msgstr "旭矬柁赙 屙 赆睃磲"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "A command line must be entered!"
+msgstr "疙 簌篝 URI 瘃蒺彘 磲 彘筢麒暹!"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Old device file"
-msgstr "嗅脶辄 狁麇唢 篚箨艴掾"
+msgid "Select user manually"
+msgstr "硼殡镢 黢摅翮 麇轳镪唔玺"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "刘酎 疱溥 疱耖泷狯 翮 篚箨艴"
+msgid "Transfer printer configuration"
+msgstr "体翎鲲褴 聃桁唧妁 尻趱瘗艮"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "容脲翦 磲 屙羼泔痫檗箦翦 翮 尻酏瘗箸 篝秕 疳襻疖睐 尻趱瘗糨 ;\n"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
+"燥燧狎 Windows 孱躔珩弭玺掾\n"
+" 燥燧狎 燥燧狎 Windows \n"
+"\n"
+" 燥燧狎 Windows 燥燧狎 柬镬 黢摅翮 戍溟挈 旭忉箸騖n"
+"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "吁黜玺 (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (三襻 %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "硼唣邃 痣珩秭锺辋 痫 祓锺稞 磲 怦彖稞 燧簌 豉 屙麸膻 cpuid"
+msgid "Use network connection to backup"
+msgstr "遵摅 簖礓弩 溟牯 汩 翎 狁麇哚 狍鲠脲哚"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Cpuid level"
-msgstr "硼唣邃 Cpuid"
+#: ../../security/help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
+msgstr ""
+"\n"
+"\n"
+" 黢摅翮 屦唣邃."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+"\n"
+" 郁徼禳 篷汜筮狎\n"
+" 另莛趱铉\n"
+"\n"
+" 郁徼禳 篷汜筮狎\n"
+"\n"
+"\n"
+"\n"
+" 另莛趱铉\n"
+"\n"
+"\n"
+" 蓬躔珩弭玺掾 孱躔珩弭玺掾\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 体翎赀礴箸 箦 孱蓦轭 响茕 羼汜筮狎:\n"
+" 响茕 羼汜筮狎:\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 孱躔珩弭玺掾\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 另徕荑扉箸\n"
+" 磔颸n"
+"."
+
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "祥觑爿礤獒 麸 屦孱羼汜篝 (.. 6 汩 觌荏 i686)"
+msgid "Accept user"
+msgstr "琉镤秣 黢摅翮"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "祥觑爿礤獒 Cpuid"
+msgid "Server"
+msgstr "蓬躔珩弭玺掾"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "另 狨艮 篚箨艴 蓣彘 麸 篥茈灬 Cyrix 6x86 Coma"
+msgid "Bad choice, try again\n"
+msgstr "梳贽 屦殡镢, 钺磲滹觊燔篝錦n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "遇茈灬 Coma"
+msgid "Heard and McDonald Islands"
+msgstr "顽筮 族耥 赆 娃箫 提晖酎磲腠"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "梳磔磲 屙犭脶牯殛 镤玢"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "岭脶戕 箦 瘃秣珈蓓 赳 脲轸秕胥哚"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "梯沐栾 翮 (溴豸蓠秕 屦轲蒌秕) cpu cache"
+msgid "(on this machine)"
+msgstr "(箦 狨酎 麸 扃鬈礴灬)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "燧沐栾 Cache"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr " IP 溟妪桴眢 翮 瘕腌 瘃蒺彘 磲 暹磲 翮 祜聆掾 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- 篚箨艴蒡 pci: 溥礤 翮 椠襻 PCI, 翮 篚箨艴 赆 脲轸秕胥哚 狨艮 翮 "
-"贶耵狎\n"
-"- 篚箨艴蒡 eide: 篚箨艴 暹磲 篚箨艴 slave master\n"
-"- 篚箨艴蒡 scsi: 溥狨腼 scsi 赆 翎 麽襻牯珩轶糸贶 翮 篚箨艴掾 scsi"
+"怦蓁珀 蓓 \"%s\" winmodem, 栎脲翦 磲 邈赆翎篝摅弭 麸 狃狁徇翮麸 "
+"腼汩箪殛 ;"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "容箸 麸 溟猃腼"
+msgid "Looking at packages already installed..."
+msgstr "剀黜 汩 掬 邈赆翦篝珈蓓 疳贻翎..."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr "PCI 篚箨艴 PCI"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "另徙睐耖篝殛 椠襻"
+msgid "Driver"
+msgstr "箱玢"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"燥 Linuxconf 赆扉 鲲褴 贶礤 溟荟锺弪 羼汜筮弪\n"
+"赆糗 翮 尻赀礴箸 麸 篚篝揿狒矧 汩 磲 溟狒珩摅彘 翮 颀桁轶 麸 篚篝揿狒矧."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "梳碥腴 EIDE/SCSI"
+msgid "Printer on remote lpd server"
+msgstr "琉镬彡聃箪蓓矧 尻趱瘗艮 箦 孱躔珩弭玺 lpd"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "梳碥腴"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"旭轫 邈赆翎篝摅弭 糸 泷犰灬麸箦轳蒡, 忮忉轾桢唪  蓣弭 麸 溟赆啭灬 磲 "
+"贶礤翦 黢摅 狨酤 豉 泷犰灬麸箦轳 赆棹 赆 磲 糸 邈赆翎篝摅弭 篝镯 "
+"躔镫镢轶艮 筢騖n"
+"\n"
+"-甜锺暹翦 磲 邈赆翎篝摅弭 糸 泷犰灬麸箦轳蒡 赆盹黹贶. 渝 箴茼殄 "
+"疱耖痿彘, 彘觑黹贻 泷犰灬麸箦轳蒡 祓锺稞 磲 疳泾箫蹴 麸 孱躔珩弭玺 ."
-#: ../../standalone/harddrake2:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"狨艮 暹磲 鲺箝贽 栎箸 篝珥 镳镞 暹磲 篚礓屐蓓 篚箨艴 (..PCI, "
-"USB, ...)"
+"Yaboot\n"
+" Linux\n"
+" 犴轺礤珀錦n"
+"\n"
+"\n"
+"\n"
+" Yaboot\n"
+"\n"
+" 狃朦\n"
+"\n"
+" Root\n"
+" Linux\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" Linux\n"
+"\n"
+" Root\n"
+" Linux\n"
+" 孱' 锺轶祜齖n"
+"\n"
+" Root\n"
+"\n"
+"\n"
+" Root\n"
+"\n"
+"\n"
+" 旭镥痖脲沆蓓 孱' 锺轶祜齖n"
+"."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "No mouse"
+msgstr "座襁 痫眙哧"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr " 脒篝 戾 屙犭脶牯殛稞 镤玢稞 汩 翮 贶耵 搠秕 筢"
+msgid "Germany"
+msgstr "缅耢犴哚"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "彭犭脶牯殛镞 镤玢镞"
+msgid "Austria"
+msgstr "刘篝襁"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "容脲翦 麸 BackSpace 磲 屦轶赳蓥彘 Delete 篝珥 觑眢;"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"抨翦胼篝 \"sndconfig\" 戾糗 翮 邈赆糗篝狍 汩 翮 颀桁轶 翮 贶耵狎"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 溟荇犷 麸 痣珀赳镫镢唢."
+msgid "Collapse Tree"
+msgstr "育祓趱铉 漭眙耧"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "腻 祓锺 磲 铄觊磙簌 麸 live upgrade!!!\n"
+msgid "Auto Install Configurator"
+msgstr "氧桁唧彘 狨酎灬翮 邈赆糗篝狍珧"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"嗅襻赆膻 彘筌沐翦 麸 CD 邈赆糗篝狍珧 篝镯 镤玢 筢 赆 疳艮篝 彭糗铄 .\n"
-"跑 溴 麸 蓣弭, 疳艮篝 陵 汩 翮 狃秭蹉 溟牯踽贽 犴徕荑扉箸."
+msgid "Configure networking"
+msgstr "妖桁轶 溟牯"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "岭脶戕 Cd-Rom"
+msgid "Where do you want to install the bootloader?"
+msgstr "酗 栎脲翦 磲 邈赆翎篝摅弭 麸 瘃襻祆 尻赀礴箸;"
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"\n"
+" 瞄 旭秣珈蓓秕騖n"
+"\n"
+"\n"
+" 审疳磉醆n"
+" 孱' 锺轶祜 瞄 旭秣珈蓓秕騖n"
+"\n"
+"\n"
+"\n"
+" 硼屙颸n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 黢摅翮騖n"
+" 黢摅翮."
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr " 犭脶戕 葶轫, 犭胲 汩 磲 轶鼾箦 栳 瘃蒺彘 磲 氵礤 狃矬溴箸"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "燥 %s 溴 躔矬翮襁驽翎 狃 狨艮 翮 蓐滹箸 麸 Mandrake Linux."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Save as.."
-msgstr "琉镨揸艴箸 衮.."
+msgid "DHCP client"
+msgstr "疱胲翮 DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "嗅襻赆膻 彘筌沐翦 翮 珉尻赳镯殛 筢 溟妪桴眢"
+msgid "Restoring from file %s failed: %s"
+msgstr " 屦犴狯锺 狃 麸 狁麇唢 %s 狃蒴貅: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "妖桁轶 彘滹痫檗箦"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (箦轳獒挈, 疳腴 C7 酏痫)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-"柔 胲忮翦 扉 彘滹痫哏箸 遘 麸 鲲耵唢 暹磲 戾汜臊翦耧 狃 狨艮 翮 糸燹"
+"胚篝 廨忉轱  栎脲翦 磲 聃桁唧弭 翮 尻酏瘗箸 箦 狨酎 麸 扃鬈礴灬;\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "load setting"
-msgstr "贮耵 聃桁唧妁"
+msgid "New devfs device"
+msgstr "洼 篚箨艴 devfs"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-"柔 胲忮翦 扉 彘滹痫哏箸 遘 扉 狃 糸 屦殡邈燧礤 躔珩弩咤 疖 磲 "
-"尻翦脲唪衢"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "service setting"
-msgstr "氧桁唧彘 躔珩弩哚"
+msgid "Boot Style Configuration"
+msgstr "妖桁轶 札痫 抨赀礴箸"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "刘酎灬麸 篚泖耧黹箪 狎 (黢摅 NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "震珩弩哚 Xinetd"
+msgid "Backup files not found at %s."
+msgstr "葬 犴暨泷狯 狍鲠脲哚 溴 怦蓁珀犴 篝 %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "震珩弩哚 Webmin"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "俞 艴麽耖篝稞戾 痫 屦殡蓊狒 麸 Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "蓬躔珩弭玺掾 SSH"
+msgid "Armenian (phonetic)"
+msgstr "榴戾黹挈 (鳄礴糸挈)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "蓬躔珩弭玺掾 Samba"
+msgid "Card model:"
+msgstr "田眙蓦 贶耵狎:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "绣胲翮 DHCP"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "蓬躔珩弭玺掾 葬黪漶镬暹秕 Postfix"
+msgid "Start Server"
+msgstr "抨赀礴箸 蓬躔珩弭玺掾"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "拈彡镬轶艮 Ftp"
+msgid "Turkmenistan"
+msgstr "燥躐觎屙轶糗"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr ""
+msgid "All remote machines"
+msgstr "茧 翎 狃镬彡聃箪蓓 扃麽磙灬翎"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "蓬躔珩弭玺掾 Apache World Wide Web"
+msgid "Install themes"
+msgstr "陪赆糗篝狍 桢燔豉"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"梳膻 锺唧狒 篝 羼汜脲唢 颀桁轶珧 翎黪漶镬暹秕.\n"
-"\n"
-"配, 栳 祓锺蒹弭 磲 聃桁唧弭 麸 簖篝珈 彘滹痫哏箸騖n"
+"犴徕徼爝箦轵 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "妖桁轶 彘滹痫哏箸 葬黪漶镬暹秕"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "砰滹痫哏箸 葬黪漶镬暹秕"
+msgid "Preparing installation"
+msgstr "旭镥麸殪狍哚 邈赆糗篝狍珧"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "疳襻赆膻 疱耖燧礤翦, 屦孱羼汜筮 狁麇唢: %s"
+msgid "Edit selected host/network"
+msgstr "硼孱羼汜筮 屦殡邈燧盹 躔镫镢轶艮/溥牯躏"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "绣耖鬻屙 麸 狁麇唢"
+msgid "Add User -->"
+msgstr "旭矬柁赙 黢摅翮 -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "庆羼镫轱"
+msgid "Nauru"
+msgstr "歪稞耧"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "硼殡蓊翦 蓓 狁麇唢"
+msgid "True Type fonts installation"
+msgstr "陪赆糗篝狍 泷犰灬麸箦轳 True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "犭胲 溴 翎轳檐驽"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "刘酎灬翮 犴喵礤躞 尻趱瘗酤 篚礓屐蓓镩 篝 麸痖挈 筢 溥牯躏"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "翎轳檐驽"
+msgid "LAN configuration"
+msgstr "妖桁轶 LAN"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "氧桁唧彘"
+msgid "hard disk model"
+msgstr "祜眙蓦 箨腌耧 溥箨秕"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "疙 羼汜脲唢 汩 磲 怆蒺弭 翎 log 筢"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "腻 祓锺暹翦 磲 黢珞殪镳镩摅弭 扉 赆糗綮珞 LVM 汩 瘃矬荞翮箸 %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "犴徭摁珞"
+msgid "Get Windows Fonts"
+msgstr "宿 民犰灬麸箦轳 Windows "
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "硼孱捭珞 篷汜脲啭 翮 Mandrake"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "神犴殛"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "嚏睚灬翎"
+msgid "Croatia"
+msgstr "蜀镝暨"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "遵摅翮"
+msgid "Gateway:"
+msgstr "旋腌 溟牯:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/嘛掼彘/_喻弭殛 戾..."
+msgid "Add server"
+msgstr "旭矬柁赙 孱躔珩弭玺"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/硼殡镢蒡/藻篝"
+msgid "Remote printer name"
+msgstr "琉镬彡聃箪蓓矧 镬 尻趱瘗艮"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/榴麇唢/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/榴麇唢/琉镨揸艴箸 _衮"
+msgid "Device: "
+msgstr "吁箨艴: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "榴麇唢/琉颻柁赍躞"
+msgid "License agreement"
+msgstr "朵彘 黢摅珧"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "硼殡镢蒡 吁篝揿狒矧"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/榴麇唢/禵盹殂灬"
+msgid "Please enter the directory where backups are stored"
+msgstr "嗅襻赆膻 彘筌沐翦 麸 赆糗腼泔 痫 怦唧觑眙衢 翎 犴暨泷狯 狍鲠脲哚"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "硼殡蓊翦 麸 屦殍蹯玺 屦唣邃 狍鲠脲哚"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/榴麇唢/_洼"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
+" 躔镫镢轶艮 暹磲 掬 篝 脒篝, 溴 祓锺暹翦 磲 麸 瘃矬栎箦翦 钺碥.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "澎鲕黹箸 禳盹 汩 翮 屦殡邈燧礴 珈蓠"
+msgid ", USB printer"
+msgstr ", 尻趱瘗艮 USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "蓬镬镞 赳唪秕 痣揸赳秕;"
+msgid "Choose the applications that will support the fonts:"
+msgstr "硼殡蓊翦 糸 弼狁祜爿 痫 栳 躔矬翮襁骘蹴 糸 泷犰灬麸箦轳蒡 :"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "嗅襻赆膻 屦殡蓊翦 酏痫 痫眙殛轱."
+msgid "Configure X"
+msgstr "妖桁轶 "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "育礓弩 %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "燥躐觊挈 (疳襻滹箝彡 \"F\" 祜眙蓦)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "琉矬溴箸 %s"
+msgid "Congratulations!"
+msgstr "吁泖狁玺揆獒!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"旭矬秣 犴轺礤珀 扉 茈腌 簖礓弩 篝 溟徜哧趱, 痫 唧 黢珞殪镳镩暹 麸 "
-"溥牯觞 筢"
+msgid "Use owner id for execution"
+msgstr "遵摅 id 赆酎黠 汩 尻糨脲箸"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "腌鲨蓓翎"
+msgid "Down"
+msgstr "受豉"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "狃弩翎腱蓓"
+msgid "Raw printer (No driver)"
+msgstr "陵狒蓠汜篝矧 尻趱瘗艮 (座襁 镤玢)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "腌鲨蓓翎:"
+msgid "Install rpm"
+msgstr "陪赆糗篝狍 rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "狃矬麸朕: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"瞄 磲 尻趱瘙箦翦 狃 翮 泷犰燹 屙麸膻 (疳褴桴耧 翦耢狒殛稞) 祓锺暹翦 磲 "
+"贶礤翦 黢摅 翮 屙麸朕 \"%s <狁麇唢>\" 祓锺暹翦 磲 贶礤翦 黢摅 泷狯殛稞 "
+"羼汜脲唢 尻酏瘗箸: \"xpp <狁麇唢>\" \" kprinter <狁麇唢>\". 燥 泷狯殛 "
+"羼汜脲唢 筢 屦轸褫疱 磲 犭胲铄翦 妪觑脶 糸 聃桁唧彘 屦殡镢.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "燥痖贽 燧赳珞"
+msgid "Time remaining "
+msgstr "彭狃镬蓓 黢矧 "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "燧箫 矧"
+msgid "UK keyboard"
+msgstr "体丬腌 埋弭犴哚 (UK)"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "妖桁轶 黢荇"
+msgid "Unmount"
+msgstr "琉矬溴箸"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-" 簖礓弩 狃蒴貅.\n"
-"硼犭玷妪篝 糸 聃桁唧彘 筢 篝 瘦眙耧 烹葶黠 Mandrake."
+msgid "Uninstall Fonts"
+msgstr "琉邈赆糗篝狍 民犰灬麸箦轳"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr " 簖礓弩 葶轫."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr " 狃矬溴箸 狃 麸 拈徜哧趱 镫镪腌颃桤赍."
+msgid "German (no dead keys)"
+msgstr "缅耢犴殛 (鼯襁 礤犟 痣揸赳)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr " 狃矬溴箸 狃 麸 溟徜哧趱 狃蒴貅."
+msgid "Transferring %s..."
+msgstr "体翎鲚皴翎 %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "育礓弩 篝 拈徜哧趱"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 鏖腴茕弪 黢狒 (15 bits)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "琉矬溴箸 狃 麸 拈徜哧趱"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"甜锺暹翦 磲 氵礤 孱徙 戾 翮 黢摅 NFS Samba. 嗅襻赆膻 屦殡蓊翦 痫唢 "
+"栎脲翦."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "嗅襻赆膻 疱耖燧礤翦, 滹觊燔驽翎 簖礓弩..."
+msgid "Reboot"
+msgstr "硼犴尻赀礴箸"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "庆羼镫獒"
+msgid "Gambia"
+msgstr "藐莒痖"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "狂 育礓弩珧: "
+msgid "Mandrake Control Center"
+msgstr "瘦眙耧 烹葶黠 Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "葬鼾翮翎 宿:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"甜锺暹翦 磲 彘筌沐翦 溟荟锺弪 柁皴.\n"
+"搞牾襻 疳襻溴咩灬翎 暹磲: 139/tcp 139/udp.\n"
+"腻唪 麸 /etc/services 汩 痣珩秭锺咤."
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Sending Speed:"
-msgstr "葬鼾翮翎 琉矬麸朕:"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"翔鏫n"
+"\n"
+"\n"
+"\n"
+"."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "郁狒轶糸贶"
+msgid "\t-Tape \n"
+msgstr "\t-葬轫哚 \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "旭秭唠 "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"腻 怦蓁珀 疱耖玢玺掾 篝 簖篝珈 筢, 嗅襻赆膻 邈赆翎篝摅翦 蓓犴 犴 栎脲翦 "
+"磲 疱耖玢玷暹翦 篝 簖篝珈 怙掼彘狎"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "嗅襻觑腼珞 拈牯"
+msgid "Remember this password"
+msgstr "琉镬礴禳礤躞 麸 犍溟觑 瘃忉箸"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "另茔睐箸 溴滹燧睐 豉 邈赆翦篝珈蓓 尻趱瘗酤..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr " 曙轫 育礓弩 篝 拈徜哧趱 酤襻 屙羼泔痫檗桤赍."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "柬镬/IP 溟妪桴眢 麸 躔镫镢轶艮:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-倪牯躏 燧簌 SSH.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-" 躔镫镢轶艮 暹磲 掬 篝 脒篝, 溴 祓锺暹翦 磲 麸 瘃矬栎箦翦 钺碥.\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr "犴轺礤珀 黢摅翮."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "遵摅 麸 咫妪桢耧 齄耧 篝珥 赆糗綮珞 豉 Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "旭蒺彘 磲 锺唧翦 麸 溟牯踽挈 镬 翮 IP 溟妪桴眢.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "燥 %s 怦蓁珀 篝 %s,磲 聃桁轶翦 狨酎灬翎;"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"硼殡蓊翦 麸 躔镫镢轶艮 麸 镳镞秕 镩 麸痖觑 筢聩糨 栳 氵盹蹴 溟徼蒹殪镩:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "曙轫 黢摅 麸痖掰 筢聩酤"
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "刘酎 麸 扃鬈礴灬"
+msgid "XFree86 driver: %s\n"
+msgstr "箱玢 XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "瘤徇皴箸 屦殡邈燧盹 躔镫镢轶艮"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"刘酎 躔镫镢轶艮/溥牯躏 暹磲 掬 篝 脒篝, 溴 祓锺暹 磲 瘃矬翦桢 "
+"钺碥.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "硼孱羼汜筮 屦殡邈燧盹 躔镫镢轶艮"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" 另狯锺 DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "旭矬柁赙 躔镫镢轶艮"
+msgid "Choose the packages you want to install"
+msgstr "硼殡蓊翦 翎 疳贻翎 痫 栎脲翦 磲 邈赆翎篝摅弭"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-"刘糗 暹磲 翎 扃麽磙灬翎 狃 秕 镩 筢聩糨 栳 瘃蒺彘 磲 黢珞殪镳镩玷稞:"
+msgid "Papua New Guinea"
+msgstr "嗅痫-洼 蔑斛磔"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "遵摅 豉 狃镬彡聃箪蓓 筢聩酤"
+msgid "Serbian (cyrillic)"
+msgstr "虞疋殛 (牾耖腚殛)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "茧 翎 狃镬彡聃箪蓓 扃麽磙灬翎"
+msgid "Make kernel message quiet by default"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"刘糗 暹磲 翎 扃麽磙灬翎 秕 镩 麸痖贶 篚礓屐蓓镩 筢聩糨(珧) 瘃蒺彘 磲 "
-"暹磲 溟徼蒹殪镩:"
+"容脲翦 磲 锺唧弭 狨酎 麸 尻趱瘗艮 (\"%s\")\n"
+"筢 麸 瘃镥痖脲沆蓓 尻趱瘗艮;"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "遵摅 豉 筢聩酤 篝秕 躔镫镢轶糨:"
+msgid "The DHCP end range"
+msgstr "To 轱 翦耢狒轶祜 DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "遵摅 筢聩酤 箦 狃镬彡聃箪蓓秕 躔镫镢轶糨"
+msgid "Creating bootdisk..."
+msgstr "溺扉秕胥哚 溥箨秕 尻赀礴箸..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "曙轫耒篝镩 筢聩糨 篝秕 躔镫镢轶糨: "
+msgid "Wait please, testing your connection..."
+msgstr "嗅襻赆膻 疱耖燧礤翦, 滹觊燔驽翎 簖礓弩..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"祥 筢聩糨 狨麸 麸 扃麽磙灬麸 暹磲 溟徼蒹殪镩 箦 茈腼躜 躔镫镢轶糨"
+msgid "Bringing down the network"
+msgstr "拈彡镳 脲轸秕胥哚 溟牯"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"硼唧珧 邃 祓锺暹翦 磲 锺唧弭 犴 筢聩糨 痫 怦唧觑眙衢 箦 狃镬彡聃箪蓓 "
-"扃麽磙灬翎 栳 暹磲 溟徼蒹殪 箦 狨酎 麸 扃鬈礴灬."
+msgid "Login ID"
+msgstr "'柬镬 遵摅翮"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"配 祓锺暹翦 磲 屦殡蓊弭 犴 镩 篚礓屐蓓镩 筢聩糨 狨麸 麸 扃麽磙灬麸 栳 "
-"暹磲 瘃矬廛箝祜 狃 狃镬彡聃箪蓓 扃麽磙灬翎 赆 狃 痫獒."
+"燥 NFS 暹磲 蓓 溏祜鲩胼 瘃镫腼 汩 麸 溟犰镩襻箪 狁麇啭 箦 \n"
+"溥牯踽 TCP/IP. 刘艮 躔珩弩哚 瘃矬鲚皴 脲轸秕胥咤 觌彘濑灬麸 狁麇啭."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "硼犴徜珈轱躐氵 脒篝狎 戾 麸躜 聃桁轶燧盹躜 筢聩糨 ..."
+msgid "DHCP Client"
+msgstr "绣胲翮 DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "眠礤翎 犴徭摁珞 汩 磔秕 筢聩糨 ..."
+msgid "dismiss"
+msgstr "荜躐"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "眠礤翎 犴徭摁珞 汩 聃桁轶燧盹躜 筢聩糨 ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "抨酏瘗箸/榆聩箸 篝 \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "曙轫 黢摅 筢聩酤"
+msgid "omit raid modules"
+msgstr "疳褴脲轼 豉 狁桉荇 raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "旭矬柁赙 筢聩艮 麇轳镪唔玺"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"燥 lpd 暹磲 躔珩弩哚 尻趱瘙箦 痫 狃衢翦唪衢 汩 磲 脲轸秕胥暹 \n"
+" 屙麸朕 lpd. 胚磲 忉箝贶 蓓狎 孱躔珩弭玺掾 痫 瘃稆桢 翎 狁麇哚 \n"
+"篝秕 尻趱瘗糨."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "另徭摁珞 汩 磔秕 筢聩糨"
+msgid "Internet Connection Configuration"
+msgstr "妖桁轶 育礓弩珧 拈徜殛酏秕"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "腻 怦蓁珀犴 筢聩糨 痫 磲 暹磲 溟徼蒹殪镩 篝 簖篝珈 筢.\n"
+msgid "comma separated numbers"
+msgstr "狁殍祜 鼯耖箪蓓镩 戾 挈祆"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-" 疳襻贶豉 筢聩艮騖n"
-"\n"
-"%s\n"
-"暹磲 溟徼蒹殪矧 篝 簖篝珈 筢騖n"
+"厅腴 屦殡蓊弭 扉 篚箨艴, 栳 祓锺暹翦 磲 溴唪 糸 痣珩秭锺咤 箦 疱溥 "
+"痫 屐鲠磉骘眙衢 篝 溴钸 綮揿 戾 镬(\"须珩秭锺咤騖")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "体翎赀礴箸 麸 屦殡邈燧盹 赆睃磲 蓓 屦唣邃 疖睐"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"祥 疳襻贶豉 筢聩糨騖n"
+" 疳襻贶豉 筢聩艮騖n"
"\n"
"%s\n"
-"暹磲 溟徼蒹殪镩 篝 簖篝珈 筢騖n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"燥 %s 筢 蓣彘 聃桁轶翦. \n"
-"甜锺暹翦 酤襻 磲 筢颃箦翦 葶泷狯 戾 麸 \"XSane\" 狃 麸 酗膈燧筢/民狯殛 "
-"狃 戾盹 弼狁祜泾."
+"暹磲 溟徼蒹殪矧 篝 簖篝珈 筢騖n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "硼殡蓊翦 篚箨艴"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "胚篝 廨忉轱 汩 翮 狯徇皴箸 麸 尻趱瘗艮 \"%s\";"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "嗅襻赆膻 屦殡蓊翦 翮 篚箨艴 篝珥 镳镞 暹磲 篚礓屐蓓 麸 %s"
+msgid "I can't find any room for installing"
+msgstr "腻 祓锺 磲 怦 狁赍酎 齄耧 汩 邈赆糗篝狍"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "眠礤翎 犴徭摁珞 汩 筢聩糨 ..."
+msgid "Default printer"
+msgstr "旭镥痖脲沆蓓矧 尻趱瘗艮"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "拈徼蒹殪弪 椠皴 狨酎灬麸 屙麸痖箪稞"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"各弭 聃桁唧彘 痫腚稞 赳秕 汩 磲 篚礓蒎篝 篝 拈徜哧趱.\n"
+"硼殡蓊翦 狨酎 痫 栎脲翦 磲 黢珞殪镳镩摅弭.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-"(隅戾啭箸: 郁轵 疳褴腚珉弪 椠皴 溴 祓锺暹 磲 氵礤 狨酎灬麸 屙麸痖箪)"
+msgid "Modify RAID"
+msgstr "择镳镳镞珞 RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"燥 %s 瘃蒺彘 磲 聃桁轶翦 狃 麸 printerdrake.\n"
-"甜锺暹翦 磲 尻觊磙箦翦 麸 printerdrake 狃 麸 瘦眙耧 烹葶黠 Mandrake 狃 麸 "
-"綮揿 针殛."
+"彭酎痖筢 扉 ISDN 贶耵, 犭胲 溴 钶聩 麸 酏痫 翮. 嗅襻赆膻 屦殡蓊翦 扉 "
+"贶耵 PCI 狃 翮 疳襻贶豉 镨."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "燥 %s 溴 躔矬翮襁驽翎"
+msgid "Add user"
+msgstr "旭矬柁赙 黢摅翮"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "燥 %s 溴 暹磲 沩酎 狃 狨艮 翮 蓐滹箸 麸 Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "倪箨镩 RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "燥 %s 溴 躔矬翮襁驽翎 狃 狨艮 翮 蓐滹箸 麸 Mandrake Linux."
+msgid "Liberia"
+msgstr "碎忮襁"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "三襻: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "硼殡蓊翦 痣珀赳镫轱"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "埋蓁珀 麸 祜眙蓦: %s"
+msgid "Format partitions"
+msgstr "田聆镳. 赆翎綮摅."
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "刘酎灬翮 溟棂箸 翮 颀桁轶珧 CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "硼殡蓊翦 蓓 祜眙蓦 筢聩艮"
+msgid "Running \"%s\" ..."
+msgstr "抨糨脲箸 麸 \"%s\"..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"麸 %s 溴 暹磲 篝 廛箸 溴滹燧睐 豉 筢聩酤, 磲 聃桁轶翦 麇轳镪唔玺;"
+msgid "enable radio support"
+msgstr "屙羼泔痫哏箸 襻溟秭秕"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "燥 %s 怦蓁珀 篝 %s,磲 聃桁轶翦 狨酎灬翎;"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "另喵礤躞 蹼殛稞 箦 孱蓦轭"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "像轶燧礤 篚箨艴蒡 瘃矬糨桤赆:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "曙轫耒篝镩 筢聩糨 篝秕 躔镫镢轶糨: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "像轶燧礤 篚箨艴蒡 篝 綮揿 蹼殛稞 \"%s\" 狯衢褫桤赆:\n"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, fuzzy, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr "磔 Linux"
+msgid "Loopback file name: %s"
+msgstr "柬镬 狁麇唢 loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "梳膻 锺唧狒 篝镯 挈箪 麸 另镩黥稞 漱溟赆"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr ""
+"嗅襻赆膻 屦殡蓊翦 麸 尻趱瘗艮 篝镯 镳镞 栳 狃矬糨腚镯翎 镩 羼汜筮弪 "
+"尻酏瘗箸."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "俞 艴麽耖篝稞戾 痫 屦殡蓊狒 麸 Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "座襁 戾翎鲲褴 尻趱瘗酤"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr "Linux"
+msgid "Delay before booting the default image"
+msgstr "梳桴篝蓠珞 瘃轫 翮 尻赀礴箸"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr "容脲翦 磲 燔桢翦 疱耖篌羼 汩 翮 觑轫玺 另镩黥稞 漱溟赆;"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
+msgstr ""
+"\n"
+"\n"
+"\n"
+"<dchaumette\\@mandrakesoft.com>\n"
+"\n"
+"\n"
+" 缅黹贶 朵彘醆n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 缅黹贶 朵彘醆n"
+"\n"
+" 腌鲨蓓翎 缅黹贶 朵彘醆n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
+" 燥燧狎 Windows \n"
+"\n"
+"\n"
+"\n"
+"\n"
+"\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Build the future of Linux!"
+msgid "Please check for multisession CD"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
-#, fuzzy, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr "Linux 屦孱羼汜筮"
-
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "user"
+msgstr "黢摅翮"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Use Hard Disk to backup"
+msgstr "遵摅 箨腌耧 溥箨秕 汩 翎 犴暨泷狯 狍鲠脲哚"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Configure"
+msgstr "妖桁轶"
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "妖桁轶 麸 拈彡镬轶艮 藻耢狒殛稞 Mandrake"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
+#: ../../standalone/drakconnect:1
+#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"燥 Mandrake Linux 9.1 筢 疳褫麇 11 溟狯锺弭殛 泷狯殛 疱耖廛腚镯翎 痫 "
-"祓锺稞 磲 戾翎赳狃稞 痣揆: KDE 3, Gnome 2, WindowMaker, ..."
+"旭镥殇镳镞珞, 屙麸疬篝珀 扉 茈腌 簖礓弩 拈徜殛酏秕 痫 唧 黢珞殪镳镩暹 "
+"麸 溥牯觞 筢"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "疙 瘃矬狁祜纥戾盹 疱耖廛腚镯"
+msgid "Backup Users"
+msgstr "另暨泷狯 馏鲠脲哚 遵珞酤"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"嗅襻赆膻 彘筌沐翦 麸 镬 麸 篚篝揿狒矧.\n"
+"燥 镬 狨酎 瘃蒺彘 磲 暹磲 蓓 痣揆弪 镬 篚篝揿狒矧,\n"
+" .. ``mybox.mylab.myco.com''.\n"
+"甜锺暹翦 屦唧珧 磲 彘筌沐翦 赆 翮 溟妪桴眢 IP 翮 瘕腌 溟牯"
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "燥 Mandrake Linux 9.1 暹磲 躔蓠翎翮 痣狒鳇耢 犴莛趱铉"
+msgid "Select Printer Spooler"
+msgstr "硼殡镢 Spooler 抨趱瘗艮"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"体翎祜聆翦 麸 扃鬈礴燔 筢 箦 蓓犴 漉磲酎 溟彡镬轶艮 Linux 戾 戾耖贶 觌殛 "
-"麸躔镯糸觊稞 筢: 拈彡镬轶艮 审麸, 翎黪漶镬暹秕, 漶镬镫镢玺掾, "
-"孱躔珩弭玺掾 狁麇啭 赆 尻趱瘗酤, ..."
+msgid "Create new theme"
+msgstr "溺扉秕胥哚 磔秕 栎灬麸"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "体翎赳蔌翦 麸 扃鬈礴燔 筢 箦 蓓犴 犷辄痖篝 溟彡镬轶艮"
-
-#: ../../share/advertising/08-store.pl:1
-#, fuzzy, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr "Linux:"
+msgid "Mandrake Tools Explanation"
+msgstr "硼孱捭珞 篷汜脲啭 翮 Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "燥 屦唧珈 赆糗篝珈 翮 MandrakeSoft"
+msgid "No image found"
+msgstr "腻 怦蓁珀 彘挈磲"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
+#: ../../install_steps.pm:1
+#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr "Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
+msgstr ""
+"体耖贶 箸灬眙殛 疳贻翎 溴 邈赆翎篝荑珀犴 簌篝.\n"
+" 镤玢 CD-ROM 麸 CD-ROM 暹磲 咫狒豉灬糸挈.\n"
+"烹葶铘 麸 CD-ROM 箦 蓓 茈腼 簖篝珈 黢珞殪镳镩翎 翮 屙麸朕 \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "埋蓁珀 麸 祜眙蓦: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
+" 拈狩彘耖篝掾 旭镡镫掾 X11 筢 屦轸褫疱 磲 篚礓彖暹翦\n"
+"戾 泷狯殛 赳 篝 簖篝珈 筢 戾 麸 育篝珈 嗅襻椠耧 磲 躔矬翮襁驽閈n"
+"翎豸耧礤 溟狯锺弭殛蒡 篚礤漶咤 篝 扃鬈礴燔 筢."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "洛媵轶麸痫檗篝 翮 狍鲕脲檐 筢"
+msgid "if set to yes, run the daily security checks."
+msgstr "犴 锺轶翦 磲, 尻糨脲箸 咫葶鼯 狍鲠脲哚 赆桤戾耖碥."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "刘酎 麸 瘃嵇 暹磲 溟徼蒹殪 篝珥 轶麸箦脒溽 麸 MandrakeStore"
+msgid "Azerbaijan"
+msgstr "伶羼祓狷翩茼"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "梳扉 翎轫哚 篝 %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (切)"
-#: ../../share/advertising/12-mdkexpert.pl:1
-#, fuzzy, c-format
+#: ../../standalone/harddrake2:1
+#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr "Linux:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr ""
+"狨艮 暹磲 鲺箝贽 栎箸 篝珥 镳镞 暹磲 篚礓屐蓓 篚箨艴 (..PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
-#, fuzzy, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "琵皴箸"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr "玄 暹磲 篚礓邃屐蓓矧 尻趱瘗艮 筢;"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "眠礤翦 MandrakeExpert"
+msgid "Security level"
+msgstr "硼唣邃 狍鲠脲哚"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr "茧."
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "final resolution"
+msgstr "翦腴贽 犴茈躞"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "震珩弩咤"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19108,10 +19180,6 @@ msgstr ""
"(kspread, gnumeric), 狁麇哚 pdf 觌"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "郁徼禳 篷汜筮狎"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "郁徼禳 疳轺黹溟"
@@ -19182,10 +19250,6 @@ msgid ""
msgstr "燥 疱耖廛腚镯 泷狯暹秕 KDE 戾 扉 篚腚镢 篚盹溴豸殛 羼汜脲啭"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "民狯殛 绣耖廛腚镯"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "郁徼禳 篷汜筮狎 Gnome"
@@ -19204,10 +19268,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 觌"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "另莛趱铉"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "麻怆轱柁赍 犴莛趱铉 C 赆 C++, 瘃镢褴祆狒 赆 茈脶 狁麇哚"
@@ -19277,34 +19337,94 @@ msgstr ""
"孱躔珩弭玺掾 NFS, 孱躔珩弭玺掾 SMB, 孱躔珩弭玺掾 Proxy, 孱躔珩弭玺掾 ssh"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "郁徼禳 棍秕"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"渝 羼汜脲啭 汩 翮 狃矬麸朕 赆 朕 犭腌腼泷狯哚, 彘滢箦 赆 "
+"疱耖捭珞 篝 拈徜哧趱"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "旭镢褴祆狒 犴狃狁徙掾/溟狩暹耖箸 搠秕"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "育礓弩 赆 颀桁轶 拈徜殛酏秕"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "郁徼禳 膺眙屣"
+#~ msgid "Configure the connection"
+#~ msgstr "妖桁轶 翮 簖礓弩珧"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "旭镢褴祆狒 犴狃狁徙掾 膺眙屣"
+#~ msgid "Disconnect"
+#~ msgstr "琉矬溴箸"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "郁徼禳 泷狯殛"
+#~ msgid "Connect"
+#~ msgstr "育礓弩"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "旭镢褴祆狒 泷狯殛"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "甜锺暹翦 磲 屦犴狁蹊爝箦翦 翮 簖礓弩 筢."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"渝 羼汜脲啭 汩 翮 狃矬麸朕 赆 朕 犭腌腼泷狯哚, 彘滢箦 赆 "
-"疱耖捭珞 篝 拈徜哧趱"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "甜锺暹翦 磲 篚礓彖暹翦 篝 拈徜哧趱 磲 屦犴狁蹊爝箦翦 翮 簖礓弩 筢."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "刘艮 翮 篝殂燹 溴 暹篝 篚礓邃屐蓓镩 篝 拈徜哧趱."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "甜锺暹翦 磲 狃矬蹴溴桢唪 磲 屦犴狁蹊爝箦翦 翮 簖礓弩 筢."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "刘艮 翮 篝殂燹 暹篝 篚礓邃屐蓓镩 篝 拈徜哧趱."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "狃矬麸朕 狁麇啭 燧簌 FTP"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "硼犴尻赀礴箸 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "溺扉秕胥哚 initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "陪泷狯 %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "另糸泷狯 %s 箦 %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "另暨泷狯 馏鲠脲哚 麸 %s 箦 %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "戾翎赳镳 泷犰灬麸箦轳 ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "体翎赳镳 民犰灬麸箦轳"
+
+#~ msgid "Author:"
+#~ msgstr "溺扉秕胥:"
+
+#~ msgid "Audio station"
+#~ msgstr "郁徼禳 棍秕"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "旭镢褴祆狒 犴狃狁徙掾/溟狩暹耖箸 搠秕"
+
+#~ msgid "Video station"
+#~ msgstr "郁徼禳 膺眙屣"
+
+#~ msgid "Video playing programs"
+#~ msgstr "旭镢褴祆狒 犴狃狁徙掾 膺眙屣"
+
+#~ msgid "Graphic station"
+#~ msgstr "郁徼禳 泷狯殛"
+
+#~ msgid "Graphics programs"
+#~ msgstr "旭镢褴祆狒 泷狯殛"
#~ msgid "Printer sharing"
#~ msgstr "曙轫 黢摅 尻趱瘗酤"
@@ -19420,12 +19540,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19532,8 +19650,7 @@ msgstr ""
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -19589,8 +19706,7 @@ msgstr ""
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -19599,7 +19715,7 @@ msgstr ""
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
@@ -19740,97 +19856,11 @@ msgstr ""
#, fuzzy
#~ msgid ""
-#~ "This is the most crucial decision point for the security of your GNU/"
-#~ "Linux\n"
-#~ "system: you have to enter the \"root\" password. \"Root\" is the system\n"
-#~ "administrator and is the only one authorized to make updates, add users,\n"
-#~ "change the overall system configuration, and so on. In short, \"root\" "
-#~ "can\n"
-#~ "do everything! That is why you must choose a password that is difficult "
-#~ "to\n"
-#~ "guess - DrakX will tell you if the password that you chose too easy. As "
-#~ "you\n"
-#~ "can see, you are not forced to enter a password, but we strongly advise "
-#~ "you\n"
-#~ "against. GNU/Linux is as prone to operator error as any other operating\n"
-#~ "system. Since \"root\" can overcome all limitations and unintentionally\n"
-#~ "erase all data on partitions by carelessly accessing the partitions\n"
-#~ "themselves, it is important that it be difficult to become \"root\".\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. Never write down the \"root\" password -- it makes it "
-#~ "too\n"
-#~ "easy to compromise a system.\n"
-#~ "\n"
-#~ "One caveat -- do not make the password too long or complicated because "
-#~ "you\n"
-#~ "must be able to remember it!\n"
-#~ "\n"
-#~ "The password will not be displayed on screen as you type it in. To "
-#~ "reduce\n"
-#~ "the chance of a blind typing error you will need to enter the password\n"
-#~ "twice. If you do happen to make the same typing error twice, this\n"
-#~ "``incorrect'' password will have to be used the first time you connect.\n"
-#~ "\n"
-#~ "If you wish access to this computer to be controlled by an "
-#~ "authentication\n"
-#~ "server, clisk the \"Advanced\" button.\n"
-#~ "\n"
-#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
-#~ "authentication\n"
-#~ "services, select the appropriate one as \"authentication\". If you do "
-#~ "not\n"
-#~ "know which to use, ask your network administrator.\n"
-#~ "\n"
-#~ "If you happen to have problems with reminding passwords, you can choose "
-#~ "to\n"
-#~ "have \"No password\", if your computer won't be connected to the "
-#~ "Internet,\n"
-#~ "and if you trust anybody having access to it."
-#~ msgstr ""
-#~ "Linux\n"
-#~ " Root\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ " Linux\n"
-#~ "\n"
-#~ "\n"
-#~ " 箸灬眙殛黒n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ " 孱躔珩弭玺掾 瞄 旭秣珈蓓秕騖n"
-#~ "\n"
-#~ " LDAP NIS 燥燧狎 Windows 燥燧狎\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ " 槛 拈徜哧趱颸n"
-#~ "."
-
-#, fuzzy
-#~ msgid ""
#~ "Your choice of preferred language will affect the language of the\n"
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
@@ -19840,7 +19870,7 @@ msgstr ""
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
@@ -19870,7 +19900,7 @@ msgstr ""
#~ " 黢摅翮."
#~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"襻\": 咫葶铘 翮 屦殡镢 齄襻. 另 溴 暹篝 箦 狨艮 翮 齄襻,\n"
@@ -19932,14 +19962,13 @@ msgstr ""
#, fuzzy
#~ msgid ""
#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"Next ->\" to reboot the system. The first "
-#~ "thing\n"
+#~ "ready to use. Just click \"%s\" to reboot the system. The first thing\n"
#~ "you should see after your computer has finished doing its hardware tests "
#~ "is\n"
#~ "the bootloader menu, giving you the choice of which operating system to\n"
#~ "start.\n"
#~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
@@ -20571,18 +20600,12 @@ msgstr ""
#~ msgid "/Autodetect printers"
#~ msgstr "/彭麸痖箪 尻趱瘗酤"
-#~ msgid "Format of floppies the drive accept"
-#~ msgstr "诛耢 汩 溟箨蒴弪 痫 祓锺暹 磲 溴黥暹 镤玢"
-
#~ msgid "Mail/Groupware/News"
#~ msgstr "葬黪漶镬暹/Groupware/砰滢箦轵"
#~ msgid "Postfix mail server, Inn news server"
#~ msgstr "蓬躔珩弭玺掾 翎黪漶镬暹秕 Postfix, 孱躔珩弭玺掾 彘滢箦 Inn"
-#~ msgid "Upgrade"
-#~ msgstr "另徕荑扉箸"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "容脲翦 磲 聃桁唧弭 赆 茈腼 尻趱瘗艮;"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
index b65cd89ea..454e15fd0 100644
--- a/perl-install/share/po/eo.po
+++ b/perl-install/share/po/eo.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-12 18:31-0400\n"
"Last-Translator: Vilhelmo Lutermano <vlutermano@free.fr>\n"
"Language-Team: esperanto <eo@li.org>\n"
@@ -14,950 +14,1498 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
+msgstr "Leganta subdiskojn por trovi kro膲punktojn"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cancel"
-msgstr "Nuligu"
+msgid "\t\tErase=%s"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "Reta Printilo (TCP/ingo)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "En艥ovu disketon en drajvo %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Lan膲u userdrake"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"膱u vi 艥atus permesi al uzuloj kundividi iujn el siaj dosierujoj?\n"
-"Permesi tion ebligos al uzuloj simple klaki sur \"Share\" respektive "
-"\"Kundividu\"\n"
-"en Konkeranto kaj nautilus.\n"
-"\n"
-"\"Custum\" ebligas per-uzulan.\n"
+"La rezerva subdisktabelo ne estas la sama grandeco\n"
+"膱u da怒ras tamen?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "Which username"
+msgstr "Kiu salutnomo"
#: ../../any.pm:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-"Vi povas eksporti uzante NFS a怒 Samba. Bonvole elektu kiun vi 艥atus uzi."
+msgid "Which type of entry do you want to add?"
+msgstr "Kiun specon de enskribo vi deziras aldoni"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "膱i tiu paka牡o %s devas esti instalita. 膱u vi deziras instali 臐in?"
+msgid "Restore partition table"
+msgstr "Resta怒ru subdiskotabelon"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Custom"
-msgstr "Akomodata"
+msgid "On CUPS server \"%s\""
+msgstr "膱e CUPS-servilo \"%s\""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Allow all users"
-msgstr "Permesu 膲iujn uzulojn"
+msgid "Post-install configuration"
+msgstr "Post-instala konfigurado"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Ne kundivido"
+msgid "Use ``%s'' instead"
+msgstr "Uzu ``%s'' anstata怒e"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "More"
-msgstr "Plu"
+msgid "Type"
+msgstr "Tipo"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Jen la kompleta listo de atingeblaj landoj"
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose your country."
-msgstr "Bonvole elektu vian landon."
+msgid "Sri Lanka"
+msgstr "Sri Lanko"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunio"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Country"
-msgstr "Lando"
+msgid "Central African Republic"
+msgstr "Centrafrika Respubliko"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "All languages"
-msgstr "膱iuj lingvoj"
+msgid "Gateway device"
+msgstr "Prokura kluzaparato"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Uzu Unikodon defa怒lte"
+msgid "Net Method:"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta怒 la instalado"
+msgid "Ethernetcard"
+msgstr "Ethernet-karto"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Bonvole elektu lingvon por uzi."
+msgid "Parameters"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lan膲i:"
+msgid "Auto-detect"
+msgstr "Memdetekta"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface:"
+msgstr "Interreto"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Elektu la defa怒ltan uzulon:"
+msgid "Select installation class"
+msgstr "Elektu instalklason"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "膱u vi deziras uzi tiun funkcion?"
+msgid "on CDROM"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mi povas konfiguri vian komputilon por a怒tomate enirigi unu uzulon"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "A怒tomata-enregistrado"
+msgid "Belarus"
+msgstr "Belarusio"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Icon"
-msgstr "Piktogramo"
+msgid "Error writing to file %s"
+msgstr "Eraro skribante al dosiero %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Shell"
-msgstr "艤elo"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd estas uzata por monitori la bateriostaton kaj registri 臐in en la\n"
+"sistemlogdosiero (syslog). Vi anka怒 povas uzi 臐in por halti la komputilon\n"
+"kiam la baterio艥argo estas malgranda."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use tape to backup"
+msgstr "Malbona rezerva dosiero"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
+msgid "The following packages are going to be installed"
+msgstr "La sekvaj paka牡oj estos instalataj"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS configuration"
+msgstr "LAN Konfigura牡o"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Password"
-msgstr "Pasvorto"
+msgid "Hong Kong"
+msgstr "Hongkongo"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "User name"
-msgstr "Salutnomo"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Mankas sufi膲an da libera spaco por disponigi novajn subdiskojn"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Real name"
-msgstr "Vera nomo"
+msgid "Moving"
+msgstr "Movante"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Accept user"
-msgstr "Akceptu uzanto"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Done"
-msgstr "Finata"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"Enigu uzanton\n"
-"%s"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Add user"
-msgstr "Aldonu uzanto"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "膱i tiu salutnomo estas jam aldonita"
+msgid "Lebanon"
+msgstr "Libano"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "膱i tiu salutnomo estas tro longa"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
+msgid "Stop"
+msgstr "Haltu"
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "Malinstalu printvicon"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Elektu dosieron"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "膱i tiu pasvorto estas tro simpla"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgara (fonetika)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Please try again"
-msgstr "Bonvole provu denove"
+msgid "The DHCP start ip"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
+msgid "256 kB"
+msgstr "256 KB"
#: ../../any.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
+msgid "Bootloader main options"
+msgstr "Start艥argilo 膲efaj opcioj"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "aliro al kompililoj"
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "access to network tools"
-msgstr "aliro al retiloj"
+msgid "Tape"
+msgstr "Bendo"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Startas vian konekta牡on..."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to administrative files"
-msgstr "aliro al administraj dosieroj"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "permesu \"su\""
+msgid "Malaysia"
+msgstr "Malajzio"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "aliro al rpm-iloj"
+msgid "Swiss (French layout)"
+msgstr "Svisa (franca aran臐o)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "aliro al X-programoj"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid malsukcesis (eble raidtools mankas)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "Webcam"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "size of the (second level) cpu cache"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Sonkarto"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli a怒 艥an臐i la ekzistantajn."
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
+msgid "Level %s\n"
+msgstr "Nivelo %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
+msgid "Luxembourg"
+msgstr "Luksemburgo"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Linux"
-msgstr "Linukso"
+msgid "Iran"
+msgstr "Irano"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
+msgid "Bus"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This label is already used"
-msgstr "膱i tiu etikedo estas jam uzata"
+msgid "Iraq"
+msgstr "Irako"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Vi devas difini radikan (root) subdiskon"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Vi devas decidi pri kerno-bildo"
+msgid "Configuring..."
+msgstr "Mi konfiguras..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Default"
-msgstr "Defa怒lta"
+msgid "Password (again)"
+msgstr "Pasvorto (denove)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "NoVideo"
+msgid "Search installed fonts"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
+msgid "Venezuela"
+msgstr "Venezuelo"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Append"
-msgstr "Alfiksu"
+msgid "IP address"
+msgstr "IP-adreso"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Label"
-msgstr "Etikedo"
+msgid "Choose the sizes"
+msgstr "Elektu la grandecojn"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unsafe"
-msgstr "Dan臐era"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Table"
-msgstr "Tabelo"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Root"
-msgstr "Radiko"
+msgid "Choose another partition"
+msgstr "Elektu alian subdiskon"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "Akceptu uzanto"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Read-write"
-msgstr "Lega-skriba"
+msgid "Username"
+msgstr "Uzulnomo"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Left \"Windows\" key"
+msgstr "Maldekstra \"Vindozo\"-klavo"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "LAN Konfigura牡o"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Grafika re臐imo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Kerna bildo"
+msgid "Guyana"
+msgstr "Gujano"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "Defa怒lta Mastruma Sistemo?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "膱u ebligi OF Boot?"
+msgid "Remove a module"
+msgstr "Forprenu modulon"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "膱u ebligi CD Boot?"
+msgid "Password"
+msgstr "Pasvorto"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "LAN Konfigura牡o"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Open Firmware Delay"
+msgid "Scanning on your HP multi-function device"
msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Starta aparato"
+msgid "Root"
+msgstr "Radiko"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Init Message"
-msgstr ""
+msgid "Choose an existing RAID to add to"
+msgstr "Elektu ekzistantan RAID por aldoni"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Start艥argilo por uzi"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turka (moderna \"Q\" modelo)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Start艥argilo 膲efaj opcioj"
+msgid "Lilo message not found"
+msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Auxtomata regenerado de kernokapoj en /boot por\n"
+"/usr/include/linux/{autoconf, version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
+msgid "if needed"
+msgstr "se bezonata"
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Ebligu multoblajn profilojn"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "Resta怒ru de dosiero"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Malproksima printilo"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Enkonduko\n"
+"\n"
+"La mastrum-sistemo kaj la diversaj komponantoj atingeblaj en la Mandrako- "
+"Linuks-eldono\n"
+"estu en la sekvo nomataj la \"softvarproduktoj\". La softvarproduktoj "
+"inkluzivigas la tuta牡on de programoj, metodoj, reguloj kaj dokumentado "
+"koncerne la mastruman sistemon,\n"
+"kaj la diversajnf komponantojn de la Mandrako-Linuks-eldono, sed\n"
+"ne estas limigitaj al ili.\n"
+"\n"
+"\n"
+"1. Licenckonsento \n"
+"Bonvole legu tiun 膲i dokumenton zorge. Tiu 膲i dokumento estas licenckonsento "
+"inter vi kaj\n"
+"MandrakeSoft S.A. kiu apliki臐as al la softvarproduktoj.\n"
+"Per instalado, duobligado a怒 uzado de la softvarproduktoj en ajna maniero, "
+"vi eksplicite\n"
+"akceptas kaj plene konsentas agi konforme al la teksto kaj kondi膲oj de tiu "
+"膲i licenco.\n"
+"Se vi malsamopinias kun iu ajn parto de la licenco, vi ne rajtas instali, "
+"duobligi a怒 uzi\n"
+"la softvarproduktojn.\n"
+"Iu ajn provo instali, duobligi a怒 uzi la softvarproduktojn en maniero kiu ne "
+"kongruas kun la teksto kaj kondi膲oj de tiu 膲i licenco estas\n"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum 膲iuj startadoj"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Kreu pra艥argdisketon"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "restrict"
-msgstr "limigu"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
+"臐usta.\n"
+"\n"
+"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
+"por via karto.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "Printas provpa臐o(j)n..."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
+msgid "Gurmukhi"
+msgstr "gumurka"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Devigu No APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Ebligu ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"膱i tiu pasvorto ests tro simpla (臐i devas esti almena怒 %d signoj longa)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo anta怒 starti defa怒ltan sistemon"
+msgid "[keyboard]"
+msgstr "[klavaro]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "kompakta"
+msgid "FTP proxy"
+msgstr "FTP prokura servilo"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Instalu sistemon"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Resta怒ru de dosiero"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Show only for the selected day"
+msgstr "Montru nur por 膲i tiu tago"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Compact"
-msgstr "Kompakta"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Start艥argila instalado"
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Unua sektoro de starta subdisko"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (膱efStartRikordo)"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la start艥argilon?"
+msgid "<control>N"
+msgstr "<stir>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
+msgid "What kind of card do you have?"
+msgstr "Kiun specon de karto vi havas?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO Instalado"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Skip"
-msgstr "Ellasu"
+msgid "Security"
+msgstr "Sekureco"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Sur disketo"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Unua sektoro de radika subdisko"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Genera"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Reta Konfigura牡o"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Vi decidis instali la startilon en subdiskon.\n"
-"Tio implicas ke vi jam havas startilon sur la fiskdisko kiun vi startigas "
-"(ekz-e: System Commander).\n"
-"\n"
-"En kiu drajvo vi startigas?"
+"Protokolo por la cetera mondo \n"
+"Neniom da D-Kanelo (lukontraktataj lineoj)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Kreas startdisketon"
+msgid "Option %s must be a number!"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "agrabla(j)"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "En艥ovu disketon en %s"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Dua disketa drajvo"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Vi ne konfiguris X-on. 膱u vi certas vere voli tion?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Unua disketa drajvo"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Beda怒rinde, neniu disketdrajvo havebla"
+msgid "What type of partitioning?"
+msgstr "Kiun specon de subdiskado?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala start艥argilo. 膱i tiu estas utila se vi ne deziras\n"
-"instali LILO (a怒 grub) sur via sistemo, a怒 alia mastruma sistemo forigas "
-"LILO,\n"
-"a怒 LILO ne funkcias kun via komputilo. Akomodita startdisketo anka怒 povas\n"
-"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani臐i de severaj\n"
-"sistemaj paneoj. 膱u vi deziras krei startdisketo por via sistemo?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interfaco"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
+" - Backup User Files: \n"
"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
"\n"
-"(AVERTO! Vi uzas XFS por via root-subdisko,\n"
-"krei startdisketon sur 1,44-mb-disketo ver艥ajne fiaskos,\n"
-"膲ar XFS bezonas tre grandan pelilon)."
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala start艥argilo. 膱i tiu estas utila se vi ne deziras\n"
-"instali SILO sur via sistemo, a怒 alia mastruma sistemo forigas SILO,\n"
-"a怒 SILO ne funkcias kun via aparato-konfigura牡o. Akomodita startdisketo "
-"anka怒\n"
-"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani臐i de\n"
-"severaj sistemaj paneoj.\n"
-"\n"
-"Se vi deziras krei startdisketon por via sistemo, en艥ovu disketon en la\n"
-"unua drajvo kaj klaku \"JES\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Vi ne povas instali la start艥argilon en %s-subdiskon\n"
+msgid "comma separated strings"
+msgstr "eroj disigitaj per komo"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "mankas sufi膲e da spaco en /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "mesa臐oj"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
+msgid "POP and IMAP Server"
+msgstr "Serviloj POP kaj IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
-"redakti la"
+msgid "Mexico"
+msgstr "Meksikio"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Formatas"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
+msgid "Rwanda"
+msgstr "Ruando"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
+msgid "Do you have any %s interfaces?"
+msgstr "膱u vi havas iun %s interfacon?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Switzerland"
+msgstr "Svislando"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Grub"
-msgstr ""
+msgid "Brunei Darussalam"
+msgstr "Brunejo Darusalamo"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr ""
+msgid "Remote lpd Printer Options"
+msgstr "Malproksimaj lpd Printilaj Opcioj"
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LILO with graphical menu"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Internet Access..."
+msgstr "Konfiguru servojn"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "SILO"
-msgstr ""
+msgid "Norway"
+msgstr "Norvegio"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Danish"
+msgstr "Dana"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"Bonvenon al %s, la mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo aux\n"
-"atendu dum %d sekundoj por defauxlta starto.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "consolehelper missing"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
+"Bonvole enigu la IP-an konfigur芒jon por 膲i tiu komputilo.\n"
+"膱iu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
+"(ekzemple, 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mankas"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ekranfotoj haveblos post instalado en %s"
+msgid "Processors"
+msgstr "Procesiloj"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Mi ne povas fari ekranfotojn anta怒 ol fari subdiskojn"
+msgid "Bulgaria"
+msgstr "Bulgario"
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Ne konektita"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuto"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Spicbergo kaj Jan-Majen-Insuloj"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "partition %s is now known as %s"
+msgstr "subdisko %s estas nun konata kiel %s"
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Malbona rezerva dosiero"
-#: ../../common.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "SMB server IP"
+msgstr "IP de SMB servilo"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kin艥aso)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "Usono"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Austria"
-msgstr "A怒strio"
+msgid "Installing HPOJ package..."
+msgstr "Instalanta paka牡on HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italio"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
+"sendepende de la normala start艥argilo. 膱i tiu estas utila se vi ne deziras\n"
+"instali LILO (a怒 grub) sur via sistemo, a怒 alia mastruma sistemo forigas "
+"LILO,\n"
+"a怒 LILO ne funkcias kun via komputilo. Akomodita startdisketo anka怒 povas\n"
+"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani臐i de severaj\n"
+"sistemaj paneoj. 膱u vi deziras krei startdisketo por via sistemo?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Nederlando"
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Svedio"
+msgid "Latvian"
+msgstr "Latva"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Norway"
-msgstr "Norvegio"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Greece"
-msgstr "Grekio"
+msgid "Module name"
+msgstr "Modulonomo"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Germany"
-msgstr "Germanio"
+msgid "Start at boot"
+msgstr "Startu 膲e starto"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech Republic"
-msgstr "la 膱e磨a Respubliko"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belgium"
-msgstr "Belgio"
+msgid "First sector of drive (MBR)"
+msgstr "Unu sektoro de drajvo (膱efStartRikordo)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "France"
-msgstr "Francio"
+msgid "Joystick"
+msgstr "Ludbastono"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Kostariko"
+msgid "El Salvador"
+msgstr "Salvadoro"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eraro dum malfermado de %s por skribi: %s"
+msgid "Use Unicode by default"
+msgstr "Uzu Unikodon defa怒lte"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nothing to do"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ne sufi膲e da libera spaco por a怒tomate disponigi novajn subdiskojn"
+msgid "Trying to rescue partition table"
+msgstr "Provas savi subdisktabelon"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Vi ne povas uzi kriptan dosiersistemon por surmetingo %s"
+msgid "Option %s must be an integer number!"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Vi bezonas veran dosiersistemon (ext2, reiserfs, xfs a怒 jfs) por tiu "
-"surmetingo\n"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "膱i tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
+msgid "Unable to start live upgrade !!!\n"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Vi ne povas uzi LVM-logikan subdiskon por kro膲punkto %s"
+msgid "Name: "
+msgstr "Nomo: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu start艥argilo povas trakti tion sen /boot subdisko.\n"
-"Bonvole zorgu aldoni /boot subdiskon."
+msgid "16 million colors (24 bits)"
+msgstr "16 milionoj koloroj (24 bitoj)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo 膲e %s\n"
+msgid "Allow all users"
+msgstr "Permesu 膲iujn uzulojn"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Surmetingoj devas enteni nur alfanumerajn signojn"
+msgid "The official MandrakeSoft Store"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun anta怒a /"
+msgid "Resizing"
+msgstr "Regrandecigas"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
+msgid "Cable connection"
+msgstr "Kabla konekto"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Salutnomo"
#: ../../fsedit.pm:1
#, c-format
@@ -977,827 +1525,243 @@ msgstr ""
"\n"
"膱u vi konsentas perdi 膲iujn subdiskojn?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Eraro"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "servilo"
+msgid "Printer on parallel port \\#%s"
+msgstr "Presilo sur paralela pordo \\#%s"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "kun /usr"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Nomo: "
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simpla"
+msgid "mkraid failed"
+msgstr "mkraid malsukcesis"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ebligas swap-subdiskon %s"
+msgid "Button 3 Emulation"
+msgstr ""
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "Konservu en dosiero"
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
+msgid "Israeli (Phonetic)"
+msgstr "Israela (fonetika)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Enkro膲as subdiskon %s"
+msgid "access to rpm tools"
+msgstr "aliro al rpm-iloj"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Kontrolanta %s"
+msgid "edit"
+msgstr ""
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Printila Aparato URI"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
+msgid "Phone number"
+msgstr "Telefonnumero"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Eraro: La \"%s\"-pelilo por via sonkarto ne estas listigita"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer name, description, location"
+msgstr "Printilan Konekton"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "USA (broadcast)"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+"Please choose the\n"
+"media for backup."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "Uzu Xinerama extension"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Retrokonektado"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"Ne povis 臐uste fermi mkbootdisk-on: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX unue detektos iujn IDE-aparatojn en via komputilo. 臏i anka怒\n"
-"ser膲as unu a怒 plurajn PCI-SCSI-kartojn en via sistemo. Se SCSI-karto\n"
-"estas trovita, DrakX a怒tomate instalos la ta怒gan pelilon.\n"
-"\n"
-"膱ar detektado de aparataro ne estas absolute senerara, DrakX povas\n"
-"malsukcesi detektante viajn fiksdiskojn. Se tiel, vi devos mem mane entajpi\n"
-"vian aparataron.\n"
-"\n"
-"Se vi devis mane entajpi vian PCI-SCSI-adaptilon, DrakX demandos 膲u vi\n"
-"deziras konfiguri opciojn por 臐i. Prefere permesu al DrakX provi la "
-"aparatojn\n"
-"por la kartospecifaj opcioj kiuj estas bezonataj por inici la adaptilon. "
-"Plej ofte,\n"
-"DrakX trairos tiun pa艥on sen ajna problemo.\n"
-"\n"
-"Se DrakX ne kapablas provi kiujn parametrojn la opcioj a怒tomate devas doni "
-"al la\n"
-"aparatoj, vi devos mane konfiguri la pelilon."
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "E怒ropo"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Nun estas tempo por elekti pressistemon por via komputilo. Aliaj mastrum-"
-"sistemoj\n"
-"proponas al vi unu, sed Linuks-Mandrako proponas du. 膱iu el la pressistemoj\n"
-"plej ta怒gas por aparta tipo de konfigurado.\n"
-"\n"
-" * \"pdq\" -- kio estas akronimo por \"print, don't queue\" (presu, ne "
-"vicigu), elektindas\n"
-"se vi havas rektan konekton kun via presilo, vi 艥atus eskapi el problemoj "
-"kun\n"
-"aliaj presiloj, kaj vi ne havas retajn presilojn. (\"pdq\"\n"
-"pritraktos nur tre simplajn retokazojn kaj estas iom malrapida se\n"
-"uzata kun retoj.) Konsilindas uzi \"pdq\" se tio 膲i estas via\n"
-"unua sperto kun GNU/Linukso.\n"
-"\n"
-" * \"CUPS\" - \"Common Unix Printing System\", estas bonega elekto por\n"
-"presigi vian lokan presilon a怒 iun ie tra la planedo. 臏i estas\n"
-"facile konfigurebla kaj povas agi kiel servilo a怒 kiel kliento por la "
-"anta怒a\n"
-"\"lpd \" pressistemo, kaj estas kongrua kun pli malnovaj mastrum-sistemoj\n"
-"kiuj eble ankora怒 bezonas presservojn. Kvankam tre potenca, la baza "
-"konfigurado\n"
-"estas preska怒 same simpla kiel \"pdq\". Se vi bezonas imiti \"lpd\"-"
-"servilon,\n"
-"certi臐u ke vi aktivigis la \"cups-lpd\"-demonon. \"CUPS\" enhavas grafikajn\n"
-"'front-ends' por presi a怒 por elekti presil-opciojn kaj por mastrumi\n"
-"la presilon.\n"
+"[OPCIOJ] [PROGRAM_NOMO]\n"
"\n"
-"Se vi faras vian elekton nun, kaj poste trovas ke vi ne 艥atas vian "
-"pressistemon,\n"
-"vi povas 艥an臐i 臐in rulante PrinterDrake ekde la Mandraka KontrolCentro kaj\n"
-"alklaki la eksperto-butonon."
+"OPCIOJ:\n"
+" --help - montru tiun help-mesa臐on.\n"
+" --report - programo estu iu de mandrake tools\n"
+" --incident - programo estu iu de mandrake tools"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Detektado de fiksdisko(j)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO kaj grub estas GNU/Linuksaj startigiloj. Normale, tiu pa艥o estas "
-"komplete\n"
-"a怒tomata. DrakX analizos la startsektoron de la disko kaj agas la怒 tio\n"
-"kion 臐i trovas tie:\n"
-"\n"
-" * se 臐i trovas vindozan startsektoron, 臐i anstata怒igos tiun per grub/LILO-"
-"a startsektoro.\n"
-"Tiel vi povos 艥argi a怒 GNU/Linukson a怒 alian mastrumsistemon.\n"
-"\n"
-" * se 臐i trovas grub- a怒 LILO-startsektoron, 臐i anstata怒igos tiun per "
-"nova.\n"
-"\n"
-" * se 臐i ne povas determini, DrakX demandos vin kien 臐i metu la\n"
-"startigilon.\n"
-"\n"
-"\"Boot device\": En plej multaj okazoj, vi ne 艥an臐u la defa怒ltan (\"Unua\n"
-"sektoro de la disko (MBR)\"), sed se vi preferas, la startigilo povas esti\n"
-"instalata sur la dua fiksdisko (\"/dev/hdb\"), a怒 e膲 sur disketo\n"
-"(\"Sur disketo\")."
+msgid "Copying %s"
+msgstr "Kopianta %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Elektu ekranon"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Post kiam vi konfiguris la 臐eneralajn startigil-parametrojn, afi艥i臐os la "
-"isto de\n"
-"startopcioj kiuj haveblas 膲e starto.\n"
-"\n"
-"Se estas en via ma艥ino aliaj mastrum-sistemoj, ili estas a怒tomate aldonitaj\n"
-"al la startmenuo. Vi povas fajnigi la ekzistantajn opciojn\n"
-"klikante al \"Aldonu\" por krei novan kampon, elektante opcion kaj\n"
-"klikante sur \"Modifi\" a怒 \"Forigi\" por modifi a怒 forigi 臐in. \"Jes\" "
-"validigas\n"
-"viajn 艥an臐ojn.\n"
-"\n"
-"Vi eble ne deziras doni aliron al tiuj aliaj mastrum-sistemoj por iu ajn "
-"kiu\n"
-"iras al la konzolo kaj restartigas la ma艥inon. Vi povas forigi la "
-"tiurilatajn\n"
-"enskribojn por forigi ilin de la startila menuo, sed tiam vi bezonos "
-"startdisketon por\n"
-"startigi tiujn aliajn mastrumsistemojn!"
+msgid "Dominican Republic"
+msgstr "Domingo"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Swaziland"
+msgstr "Svazilando"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid "Set-UID"
msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Bonvolu klaki sur subdiskon"
+
#: ../../help.pm:1
#, c-format
msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Bonvolu elekti la 臐ustan pordon. Ekzemple, la \"COM1\"-a\n"
-"pordo sub MS Vindozo estas nomata \"ttyS0\" sub GNU/Linukso."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Nespecifa 2 Butona Muso"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Forigu la logikajn spacojn unue\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet access"
+msgstr "Interreto"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Enabling servers..."
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
+msgid "Printing test page(s)..."
+msgstr "Printas provpa臐o(j)n..."
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "Jam estas subdisko kun surmetingo 膲e %s\n"
#: ../../help.pm:1
#, c-format
@@ -1818,234 +1782,165 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+msgid "Ukraine"
+msgstr "Ukrajno"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "A怒tentikigado"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "Eksterna ISDN-modemo"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "Via elekta牡o? (defa怒lo estas %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunio"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
+"Provpa臐o(j)n estis sendataj al la printila demono.\n"
+"膱i tiu eble postulas iom da tempo anta怒 ol la printilo komencas.\n"
+"Printada stato:\n"
+"%s\n"
+"\n"
+"膱u 臐i 臐uste funkcias?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "Neniu printilo"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Tiu 膲i dialogo uzeblas por elekti kiujn servojn vi deziras startigi kiam vi "
-"startigas\n"
-"vian komputilon.\n"
-"DrakX listigos 膲iujn servojn atingeblajn en la nuna instala牡o.\n"
-"Kontrolu 膲iujn zorge kaj malelektu tiujn kiuj ne estas 膲iam bezonataj\n"
-"dum la starto.\n"
-"Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin. 臏i priskribas la rolon de la servo.\n"
-"Tamen, se vi ne certas 膲u iu servo utilas a怒 ne, prefere lasu la defa怒ltan "
-"sintenon.\n"
-"\n"
-"!!Zorgegu en 膲i tiu pa艥o se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne bezonas. Memoru ke certaj servoj povas esti\n"
-"dan臐eraj se ili estas aktivigitaj en servilo. 臏enerale,\n"
-"elektu nur tiujn servojn kiujn vi vere bezonas.\n"
-"!!"
+msgid "Ireland"
+msgstr "Irlando"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "kernel version"
+msgstr "Kerna versio"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "Reta Konfigura牡o"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "膱u tiu 膲i konfigurado 臐ustas?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2060,5947 +1955,6098 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "LAN Konfigura牡o"
+
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Autoprobe"
+msgstr "A怒tomate esploru"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Can't use broadcast with no NIS domain"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Foriganta presilon \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+msgid "Peru"
+msgstr "Peruo"
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Musaparato: %s\n"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "Forigu Vindozon"
-#: ../../install2.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Startigas la X tiparan servilon (tio estas ... ."
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn. Bonvolu kontroli vian ekipa牡on por la ka怒zo de 膲i "
-"tiu problemo."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
+msgid "Madagascar"
+msgstr "Madagaskaro"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "En艥ovu FAT-formatitan disketon en drajvo %s"
+msgid "System"
+msgstr "Sistemo"
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
+msgid "Do you want to use this feature?"
+msgstr "膱u vi deziras uzi tiun funkcion?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
#, c-format
+msgid "Arabic"
+msgstr "araba"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
+"- Options:\n"
+msgstr "Opcioj"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Pasvorto"
+
+#: ../../common.pm:1
#, c-format
-msgid "No"
-msgstr "Ne"
+msgid "%d minutes"
+msgstr "%d minutoj"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Yes"
-msgstr "Jes"
+msgid "Graphics card: %s"
+msgstr "Grafika karto: %s"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "WebDAV transfer failed!"
msgstr ""
-#: ../../install_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "System configuration"
-msgstr "Sistem-konfigurado"
+msgid "XFree configuration"
+msgstr "XFree Konfigurado"
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "System installation"
-msgstr "Sistem-nstalado"
+msgid "Choose action"
+msgstr "Elektu agon"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
+msgid "French Polynesia"
+msgstr "Franca Polinezio"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Subteno de OKI 4w kaj kongruaj winpresiloj."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsor膲ilo de DrakX trovis 膲i tiujn solvojn:"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
+"Lan膲u la ALSA (Advanced Linux Sound Architecture - Avancita Linuksa Son-"
+"Arkitekturo)-sonsistemon"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Mi ne trovas spacon por instali"
+msgid "Installing driver for %s card %s"
+msgstr "Instalas pelilon por %s karto %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi fini臐os, ne forgesu savi kun `w'."
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Datumbazoj"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "subdiskigo"
+msgid "Ukrainian"
+msgstr "Ukrajna"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"膱iuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "En艥ovu la uzitan startigan disketon en drajvo %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Forvi艥u la tutan diskon"
+msgid "Local network(s)"
+msgstr "Loka(j) reto(j)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
msgstr "Forigu Vindozon"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
msgstr ""
-"Ne ekzistas FAT-a subdisko por regrandecigi\n"
-"(a怒 ne estas sufi膲e da spaco)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
+msgid "Firewire controllers"
+msgstr "Firewire-kontroliloj"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
+"Post kiam vi konfiguris la 臐eneralajn startigil-parametrojn, afi艥i臐os la "
+"isto de\n"
+"startopcioj kiuj haveblas 膲e starto.\n"
+"\n"
+"Se estas en via ma艥ino aliaj mastrum-sistemoj, ili estas a怒tomate aldonitaj\n"
+"al la startmenuo. Vi povas fajnigi la ekzistantajn opciojn\n"
+"klikante al \"Aldonu\" por krei novan kampon, elektante opcion kaj\n"
+"klikante sur \"Modifi\" a怒 \"Forigi\" por modifi a怒 forigi 臐in. \"Jes\" "
+"validigas\n"
+"viajn 艥an臐ojn.\n"
+"\n"
+"Vi eble ne deziras doni aliron al tiuj aliaj mastrum-sistemoj por iu ajn "
+"kiu\n"
+"iras al la konzolo kaj restartigas la ma艥inon. Vi povas forigi la "
+"tiurilatajn\n"
+"enskribojn por forigi ilin de la startila menuo, sed tiam vi bezonos "
+"startdisketon por\n"
+"startigi tiujn aliajn mastrumsistemojn!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeci臐o de FAT malsukcesis: %s"
+msgid "System mode"
+msgstr "Sistema modalo"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
+"nomon (Notu! 臏i eble estas malsama de 臐ia TCP/IP nomo!) aldone al la\n"
+"printvican nomon por la printilo vi deziras atingi kaj iun ajn ta怒gan\n"
+"salutnomon kaj pasvorton."
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "Regrandecigas"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Retmasko"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
+msgid "Append"
+msgstr "Alfiksu"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"AVERTO!\n"
+
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"DrakX nun regrandecigos vian Vindozan subdiskon. Zorgu:\n"
-"膲i tiu operacio estas dan臐era. Se vi ne jam faris 臐in,\n"
-"vi prefere anta怒e eliru el la instalado, uzu\n"
-"\"scandisk\" sub Vindozo (kaj la怒vole rulu \"defrag\"), kaj sekve relan膲u "
-"la\n"
-"instaladon. Vi prefere faru anka怒 rezervan kopion de via datenoj.\n"
-"Kiam vi estos certa, klaku \"Jeso\"."
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"OSS (Open Sound System - Libera Sonsistemo) estis la nuna son-API. 臏i estas "
+"son-API "
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' anta怒e"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Kalkulante la liberan spacon sur la Vindoza subdisko"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network printer \"%s\", port %s"
+msgstr "Reta Printilo (TCP/ingo)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
+"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
+msgid "Please choose your keyboard layout."
+msgstr "Bonvole elektu vian klavar-aran臐on."
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ne ekzistas FAT-a subdiskoj por regrandecigi\n"
-"a怒 uzi kiel retrokonektaj subdiskoj (a怒 ne estas sufi膲a da spaco)spaco)"
+msgid "Printer Device URI"
+msgstr "Printila Aparato URI"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Inter艥an臐a subdiska grandeco en MB: "
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
+msgid "Terminal-based"
+msgstr "Finaparato-bazata"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por Linux4Win?"
+msgid "The user name is too long"
+msgstr "膱i tiu salutnomo estas tro longa"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
+msgid "Other OS (windows...)"
+msgstr "Alia Mastruma Sistemo (Vindozo...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use existing partitions"
-msgstr "Uzu ekzistantajn subdiskojn"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Legas datumbason de CUPS peliloj..."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufi膲an da libera spaco por disponigi novajn subdiskojn"
+msgid "Generate auto install floppy"
+msgstr "Kreu a怒toinstalan disketon"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi FAT-subdiskon en /boot/efi"
+msgid "Somalia"
+msgstr "Somalujo"
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
+msgid "No open source driver"
+msgstr "Nenia liberfonta pelilo"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"Vi ne havas inter艥an臐an subdiskon\n"
-"\n"
-"膱u vi deziras da怒ri tamen?"
+"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
+"malfermita. Sekurecaj aspektoj estas 膲e iliaj maksimumoj."
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por 膲i tiu, kreu subdiskon (a怒 klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru 臐in '/'"
+msgid "Nicaragua"
+msgstr "Nikaragvo"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili 膲e: %s"
+msgid "New Caledonia"
+msgstr "Nov-Kaledonio"
-#: ../../install_messages.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
+msgid "European protocol (EDSS1)"
+msgstr "E怒ropa protokolo (EDSS1)"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
+msgid "Video mode"
+msgstr "Grafika re臐imo"
-#: ../../install_messages.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "Bonvole provu denove"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Averto\n"
-"Bonvolu zorge legi la suban tekston. Se vi malsamopinias kun iu\n"
-"parto, vi ne rajtas instali la venontan KD-enhavon. Premu 'Rifuzas'\n"
-"por da怒rigi la instaladon sen uzi tiun KD-enhavon.\n"
-"\n"
-"\n"
-"Iuj komponantoj entenataj en la venonta KD ne estas regataj\n"
-"de la GPL-licenco a怒 similaj interkonsentoj. 膱iu tia komponanto estas\n"
-"tiam regata de la teksto kaj kondi膲oj de 臐ia propra specifa licenco.\n"
-"Bonvolu zorge legi tiajn specifajn licencojn kaj agi la怒 ili anta怒\n"
-"ol uzi a怒 redisdoni la nomitajn komponantojn.\n"
-"Tiaj licencoj 臐enerale malhelpas transdonon, duobligon\n"
-"(escepte por savkopioj), redistribuadon, 'reverse engineering',\n"
-"malmuntadon, malkompiladon a怒 modifadon de la komponento.\n"
-"膱ia rompo de la konsento tuj 膲esigos viajn rajtojn sub\n"
-"la respektiva licenco. Escepte se la specifa licenco donas al vi tiajn\n"
-"rajtojn, vi kutime ne povas instali la programojn sur pli ol unu\n"
-"sistemo, a怒 adapti 臐in por uzi 臐in en reto. En duba kazo bonvole kontaktu\n"
-"rekte la disdoninton a怒 la eldoninton de la komponanto.\n"
-"Transdonado al triaj partoj a怒 kopiado de tiaj komponantoj inkluzive de la \n"
-"dokumenta牡o normale estas malpermesita.\n"
-"\n"
-"\n"
-"膱iuj rajtoj pri la komponantoj de la venonta KD apartenas al ties\n"
-"respektivaj a怒toroj kaj estas protektataj de le臐oj pri intelekta propra牡o "
-"kaj\n"
-"kopirajto aplikeblaj al softvaraj programoj.\n"
+msgid "Oman"
+msgstr "Omano"
-#: ../../install_messages.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Enkonduko\n"
-"\n"
-"La mastrum-sistemo kaj la diversaj komponantoj atingeblaj en la Mandrako- "
-"Linuks-eldono\n"
-"estu en la sekvo nomataj la \"softvarproduktoj\". La softvarproduktoj "
-"inkluzivigas la tuta牡on de programoj, metodoj, reguloj kaj dokumentado "
-"koncerne la mastruman sistemon,\n"
-"kaj la diversajnf komponantojn de la Mandrako-Linuks-eldono, sed\n"
-"ne estas limigitaj al ili.\n"
-"\n"
-"\n"
-"1. Licenckonsento \n"
-"Bonvole legu tiun 膲i dokumenton zorge. Tiu 膲i dokumento estas licenckonsento "
-"inter vi kaj\n"
-"MandrakeSoft S.A. kiu apliki臐as al la softvarproduktoj.\n"
-"Per instalado, duobligado a怒 uzado de la softvarproduktoj en ajna maniero, "
-"vi eksplicite\n"
-"akceptas kaj plene konsentas agi konforme al la teksto kaj kondi膲oj de tiu "
-"膲i licenco.\n"
-"Se vi malsamopinias kun iu ajn parto de la licenco, vi ne rajtas instali, "
-"duobligi a怒 uzi\n"
-"la softvarproduktojn.\n"
-"Iu ajn provo instali, duobligi a怒 uzi la softvarproduktojn en maniero kiu ne "
-"kongruas kun la teksto kaj kondi膲oj de tiu 膲i licenco estas\n"
+msgid "Network Monitoring"
+msgstr "Reta Konfigura牡o"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras pa艥on `%s'\n"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Help"
-msgstr "Helpo"
+msgid "New size in MB: "
+msgstr "Nova grandeco en MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "not configured"
-msgstr "ne konfigurita"
+msgid "Partition table type: %s\n"
+msgstr "Subdiskotabelospeco: %s\n"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configure"
-msgstr "Konfiguru"
+msgid "Authentication Windows Domain"
+msgstr "A怒tentikigado Vondoza Domajno"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "膱u vi deziras da怒ri tamen?"
+msgid "US keyboard"
+msgstr "Usona klavaro"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de paka牡oj:"
+msgid "Buttons emulation"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi paka牡ojn:"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"艤an臐u vian KDROM!\n"
+"Drakbackup activities via tape:\n"
"\n"
-"Bonvole, en艥ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas 臐in, klaku \"Nuligu\" por eviti la instaladon de 膲i tiu KDROM."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Refuse"
-msgstr "Malakceptu"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Akceptu"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Konservu en dosiero"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta paka牡o %s"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Konfigura牡on"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d paka牡oj"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No details"
-msgstr "Neniaj detaloj"
+msgid "Bosnian"
+msgstr "Bosna"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Bonvole atendu"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Details"
-msgstr "Detaloj"
+msgid "Connection speed"
+msgstr "Rapido de konekto"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Bonvole atenduj, mi preparas instaladon..."
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Tempo restanta "
+msgid "Namibia"
+msgstr "Namibio"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Taksas"
+msgid "Database Server"
+msgstr "Datumbaz-servilo"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing"
-msgstr "Instalanta"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Elektu la paka牡ojn kiuj vi deziras instali"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimuma instalado"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
+"NOTU KE 膱I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
+"KOMPUTILON.\n"
+"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security options..."
+msgstr "Preparas instaladon"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "臏isdatigo de paka牡-elekto"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "艤argu/Konservu sur disketo"
+msgid "Launch the graphical environment when your system starts"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Anta怒a"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalu"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Montru a怒tomate elektitajn paka牡ojn"
+msgid "Making printer port available for CUPS..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti 膲i tiun paka牡on. 臏i devus esti promociata."
+msgid "Antigua and Barbuda"
+msgstr "Antigvo-Barbudo"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"膱i tiu paka牡o devus esti promociata.\n"
-"膱u vi certas ke vi deziras malelekti 臐in?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti 膲i tiun paka牡on. 臏i estas jam instalita."
+msgid "Spanish"
+msgstr "Hispana"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "膱i tiu estas deviga paka牡o, vi ne povas malelekti 臐in"
+msgid "Start"
+msgstr "Startu"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu 膲i tiun paka牡on"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj paka牡oj estos malinstalataj"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Konfiguru Printilon"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj paka牡oj estos instalataj"
+msgid "Normal modem connection"
+msgstr "Normala modemo-konekto"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "Elektado de Paka牡oj"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Vi ne povas elekti 膲i tiun paka牡on 膲ar ne estas sufi膲e da spaco por instali\n"
-"臐in."
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Graveco: %s\n"
+msgid "CUPS"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeco: %d KB\n"
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
+msgid "Bootloader installation"
+msgstr "Start艥argila instalado"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nomo: %s\n"
+msgid "Root partition size in MB: "
+msgstr "Radikosubdiska grandeco en MB: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Malbona paka牡o"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "膱i tiu estas deviga paka牡o, vi ne povas malelekti 臐in"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other"
-msgstr "Alia"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
+"po艥tejojn de IP adresoj."
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Next ->"
-msgstr "Sekvanta ->"
+msgid "Disconnect..."
+msgstr "Malkonektu..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Elektado de individuaj paka牡oj"
+msgid "Saint Lucia"
+msgstr "Sent-Lucio"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "porto"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Elektado de Paka牡aj Grupoj"
+msgid "Palau"
+msgstr "Pala怒o"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Via sistemo havas malmulte da risurcoj. Eble vi havos problemojn pri\n"
-"instali Linuks-Mandrejkon. Se tio okazos, vi povos anstata怒 provi tekstan\n"
-"instaladon. Por 膲i tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-"tajpu `text'."
+msgid "level"
+msgstr "nivelo"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Save packages selection"
-msgstr "Konservu la paka牡-elekton"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "A怒tomata"
+msgid "Package Group Selection"
+msgstr "Elektado de Paka牡aj Grupoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Replay"
-msgstr "Reludu"
+msgid "Restore Via Network Protocol: %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+msgid "You can configure each parameter of the module here."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Kreu a怒toinstalan disketon"
+msgid "Choose the resolution and the color depth"
+msgstr "Elektu distingivon kaj kolorprofundon"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Reboot"
-msgstr "Restarto"
+msgid "Emulate third button?"
+msgstr "膱u vi deziras emuli trian musbutonon?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"Kelkaj pa艥oj ne fini臐is.\n"
-"\n"
-"膱u vi vere volas 膲esi nun?"
+"Vi ne povas krei novan subdiskon\n"
+"(膲ar vi atingis la maksimuman nombron da primaraj subdiskoj).\n"
+"Unue forigu primaran subdiskon kaj kreu etenditan subdiskon."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Creating auto install floppy..."
+msgid "Mount"
+msgstr "Muntu"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
msgstr "Kreas a怒toinstalan disketon"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../steps.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "En艥ovu malplenan disketon en drajvo %s"
+msgid "Install updates"
+msgstr "Instalu 臐isdatigojn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "text box height"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalado de start艥argilo malsukcesis. La sekvanta eraro okazis:"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installing bootloader"
-msgstr "Instalas start-艥argilon"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "State"
+msgstr "Stato:"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro da怒re mi instalis \"aboot\",\n"
-"膱u mi devus provi perforte instali e膲 se tio detruas la unuan subdiskon?"
+msgid "Be sure a media is present for the device %s"
+msgstr "Kontrolu ke medio estas en la aparato %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "膱u vi deziras uzi aboot-on?"
+msgid "Enable multiple profiles"
+msgstr "Ebligu multoblajn profilojn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-"艤ajne vi havas malnovegan a怒 nekonatan ma艥inon,\n"
-"la yaboot-startilo ne funkcios por vi.\n"
-"La instalado da怒rigos, sed vi devos\n"
-"uzi BootX a怒 alian rimedon por startigi vian ma艥inon"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Preparas start艥argilon"
+msgid "Local printer"
+msgstr "Loka printilo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Domain Admin Password"
+msgid "Files Restored..."
msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Uzulnomo de la Domajna administranto"
+msgid "Package selection"
+msgstr "Elektado de Paka牡oj"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Vindozo Domajno"
+msgid "Mauritania"
+msgstr "Ma怒rlando"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "A怒tentikigado Vondoza Domajno"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS Servilo"
+msgid "All primary partitions are used"
+msgstr "膱iuj el la subdiskoj estas uzata"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domajno"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "A怒tentikiga NIS"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Auxtomata detektado kaj konfigurado de aparataro dum starto."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "LAN Konfigura牡o"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
+msgid "Configuring IDE"
+msgstr "Konfiguras IDE"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Ekrano ne estas konfigurata"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication LDAP"
-msgstr "A怒tentikiga LDAP"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Konfiguru muson"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokos-Insuloj (Keeling)"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Local files"
-msgstr "Lokaj dosieroj"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Konektu al la Interreto"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication"
-msgstr "A怒tentikigado"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Vi bezonos restarti anta怒 ol la 艥an臐o povas efektivi臐i"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"膱i tiu pasvorto ests tro simpla (臐i devas esti almena怒 %d signoj longa)"
+msgid "Provider phone number"
+msgstr "Telefonnumero de interretprovizanto"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No password"
-msgstr "Neniu pasvorto"
+msgid "Host %s"
+msgstr "Gastiganto %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Difinu pasvorton de root"
+msgid "Armenia"
+msgstr "Armenio"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Vi ne konfiguris X-on. 膱u vi certas vere voli tion?"
+msgid "Fiji"
+msgstr "Fi臐io"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Services"
-msgstr "Servoj"
+msgid "Second floppy drive"
+msgstr "Dua disketa drajvo"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "System"
-msgstr "Sistemo"
+msgid "About Harddrake"
+msgstr ""
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "%s on %s"
-msgstr "%s sur %s"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Start艥argilo"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"En艥ovu disketon en drajvo\n"
+"膱iuj datenoj sur tiu disketo estos perdata"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot"
-msgstr "Starto"
+msgid "Size: %s"
+msgstr "Grandeco: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "disabled"
-msgstr "malebligita"
+msgid "Control and Shift keys simultaneously"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "activated"
-msgstr "aktiva"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d sekundoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Reta Konfigura牡o"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Firewall"
+msgid "if set to yes, report check result to syslog."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "Sekureco"
+msgid "No password"
+msgstr "Neniu pasvorto"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Level"
-msgstr "sekurnivelo"
+msgid "Nigeria"
+msgstr "Ni臐erio"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Network"
-msgstr "Reto"
+msgid "There is no existing partition to use"
+msgstr "Ne ekzistas subdiskojn por uzi"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Network & Internet"
-msgstr "Reto kaj Interreto"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafika interfaco"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Por printi al inga printilo, vi bezonas provizi la\n"
+"po艥tejon de la printilo kaj opcie la pordnumeron."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Aparataro"
+msgid "Hard drive information"
+msgstr "Informoj pri fiksdisko(j)"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV-karto"
+msgid "Russian"
+msgstr "Rusa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Ne detektis sonkarto. Provu \"harddrake\" post instalado"
+msgid "Jordan"
+msgstr "Jordanio"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rulu \"sndconfig\" post instalado por konfiguri vian sonkarton"
+msgid "Hide files"
+msgstr "Ka艥u dosierojn"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "膱u vi havas ISA-sonkarton?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Malproksima printilo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Sound card"
-msgstr "Sonkarto"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
+msgid "Sorry, no floppy drive available"
+msgstr "Beda怒rinde, neniu disketdrajvo havebla"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "Neniu printilo"
+msgid "Bolivia"
+msgstr "Bolivio"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "Printilo"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Muso"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Horzono"
+msgid "Bad package"
+msgstr "Malbona paka牡o"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Keyboard"
-msgstr "Klavaro"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
-#, c-format
-msgid "Summary"
-msgstr "Resumo"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Opcioj"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Servilo"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
+msgid "Romania"
+msgstr "Rumanujo"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Aparata horlo臐o estas 臐ustigita la怒 GMT"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Starta aparato"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
+msgid "Canada"
+msgstr "Kanado"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "膱u vi 艥atus reprovi?"
+msgid "Remove from LVM"
+msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne povis kontakti spegulon %s"
+msgid "Timezone"
+msgstr "Horzono"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktu la spegulon por havigi la liston de havebla paka牡oj"
+msgid "German"
+msgstr "Germana"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la paka牡ojn"
+msgid "Next ->"
+msgstr "Sekvanta ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"Mi kontaktas la Linuks-Mandrakan retpa臐on por havigi la liston de "
-"disponeblaj speguloj..."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"Vi havas nun la eblecon de艥uti 臐isdatigitajn paka牡ojn. Tiuj paka牡oj\n"
-"estas 臐isdatigitaj post eldonado de tiu 膲i eldono. Ili povas\n"
-"enteni sekureco- a怒 eraro-riparojn.\n"
"\n"
-"Por de艥uti tiujn paka牡ojn, vi bezonas funkciantan Interret-\n"
-"konekton.\n"
-"\n"
-"膱u vi deziras instali tiujn 臐isdatigojn?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"En艥ovu la disketon kun 臐isdatigaj moduloj (Update Modules) en drajvo %s"
+"Povas esti, ke tiu 膲i subdisko estas\n"
+"pelila subdisko. Prefere\n"
+"lasu 臐in sola.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "En艥ovu la uzitan startigan disketon en drajvo %s"
+msgid "Guinea-Bissau"
+msgstr "Gvineo-Bisa怒o"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
+msgid "Horizontal refresh rate"
+msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Instalas paka牡o %s\n"
-"%d%%"
+"Ne povas malfiksi surmetingon 膲ar 膲i tiu subdisko estas uzata por\n"
+"retrokonektado. Unue forigu la retrokonektadon."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
+msgid "USB controllers"
+msgstr "USB-kontroliloj"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas 膲iujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de 膲i tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
+msgid "What norm is your TV using?"
+msgstr "Kiun normon uzas via TV?"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "All"
-msgstr "膱iuj"
+msgid "Type:"
+msgstr "Speco:"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Vere minimuma instalado (precipe ne urpmi)"
+msgid "Share name"
+msgstr "Opuza nomo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Kun baza dokumenta牡o (rekomendita!)"
+msgid "enable"
+msgstr "ebligu"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr "Kun X"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Mi kontaktas la Linuks-Mandrakan retpa臐on por havigi la liston de "
+"disponeblaj speguloj..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
msgstr ""
-"Vi ne elektis paka牡grupon.\n"
-"Bonvole elektu la minimuman instaladon kiun vi deziras:"
+"Problemo okazis dum restarto de la reto: \n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Type of install"
-msgstr "Instaltipo"
+msgid "Remove the loopback file?"
+msgstr "膱u forigu la retrokonektan dosieron?"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Elektita grandeco estas pli ampleksa ol disponebla spaco"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "En艥ovu disketon kun paka牡-selekto en drajvo"
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "艤argas de disketo"
+msgid "Please choose your country."
+msgstr "Bonvole elektu vian landon."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package selection"
-msgstr "Elektado de Paka牡oj"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Malbona rezerva dosiero"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Konservu sur disketo"
+msgid "Laotian"
+msgstr "Laosa"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "艤argu de disketo"
+msgid "Samoa"
+msgstr "Samoo"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-"Bonvole elektu 艥argu a怒 konservu paka牡-elekton sur disketo.\n"
-"La formato estas la sama kiel disketoj generitaj per auto_install."
+"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
+"pri la rapideco de iu ajn komputilo sur tiu reto."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-"Via komputilo ne havas sufi膲e da spaco por instalado a怒 promocio (%d > %d)."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Ser膲as haveblajn paka牡ojn"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Trovadas paka牡ojn por promocii"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Rigardante jam instalitajn paka牡ojn..."
-
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Ser膲as haveblajn paka牡ojn kaj refaras la rpm-datenbazon..."
+msgid "Scanner"
+msgstr "skanilo"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nesufi膲a inter艥an臐ospaco por plenumi instalado, bonvolu aldoni iom"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Averto: provado de 膲i tiu grafika-karto eble svenigos vian komputilon"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Mi malsukcesis kontroli la dosiersistemon %s. 膱u vi deziras ripari la "
-"erarojn? (atentu, vi povas perdi datenojn)"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "膱u kontrolas malbonajn blokojn?"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "Spertulo"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
+msgid "Welcome To Crackers"
+msgstr "Bonvenon Al Rompistoj"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la 艥an臐oj al la subdisktabelo efektivigi"
+msgid "Module options:"
+msgstr "Modulaj opcioj:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-"Ne libera spaco por 1mb-startparto! La instalado daurigos, sed por startigi "
-"vian sistemon, vi devos krei la startpartan subdiskon en DiskDrake"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Leganta subdiskojn por trovi kro膲punktojn"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "Konfiguras reto"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No partition available"
-msgstr "neniuj haveblaj subdiskoj"
+msgid "Abort"
+msgstr "膱esigu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Uzu liberan spacon"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Button 3 Emulation"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' anta怒e"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr ""
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak-a (Norvega)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Buttons emulation"
+msgid "Hard Disk Backup Progress..."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
+msgid "Unable to fork: %s"
+msgstr "Ne povis forki: %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Muspordo"
+msgid "Type: "
+msgstr "Speco: "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Bonvole elektu la specon de via muso."
+msgid "<-- Edit Client"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "La pasvortoj ne egalas"
+msgid "no fonts found"
+msgstr "neniu retkarto trovita"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "臏isdatigu %s"
+msgid "Mouse"
+msgstr "Muso"
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "膱u tiu 膲i estas instalado a怒 臐isdatigo?"
+msgid "not enough room in /boot"
+msgstr "mankas sufi膲e da spaco en /boot"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalado/臏isdatigo"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Jen la kompleta listo de haveblaj klavaroj"
+msgid "Host name"
+msgstr "Po艥tejo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Bonvole elektu vian klavar-aran臐on."
+msgid "Liechtenstein"
+msgstr "Li磨ten艥tejno"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Quit"
-msgstr "膱esu"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "License agreement"
-msgstr "Licenca kontrakto"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Eraro okazis"
+msgid "Add to RAID"
+msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr " <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrejka Instalado %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
msgstr "Neniu disketilo havebla"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"Iuj gravaj paka牡oj ne estis ta怒ge instalata.\n"
-"A怒 via KDROM drajvo a怒 via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
+msgid "Continue anyway?"
+msgstr "膱u mi devus da怒ri malgra怒e?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti 臐in bone.\n"
-"Da怒ri je via propra risko."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Bonvole atendu"
+msgid "Printer"
+msgstr "Printilo"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Jeso"
+msgid "Saudi Arabia"
+msgstr "Sa怒da Arabujo"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Finish"
-msgstr "Finu"
+msgid "Internet"
+msgstr "Interreto"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
-msgstr "Baza"
+msgid "Some devices were added:\n"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Progresinta"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove"
-msgstr "Forigu"
+msgid "Printing on the printer \"%s\""
+msgstr "Presanta per presilo \"%s\""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Modify"
-msgstr "艤an臐u"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "Aldonu"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "Sava subdiskotabelo"
-#: ../../interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Elektu dosieron"
+msgid "Choose the profile to configure"
+msgstr "Elektu la konfigurendan profilon"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-"膱i tie vi povas elekti la klavon a怒 klavkombinon kiu\n"
-"ebligos al vi 艥alti inter la diversaj klavaroj\n"
-"(ekz-e latinaj kaj ne-latinaj)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Dekstra \"Vindozo\"-klavo"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "Reta Konfigura牡o"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Maldekstra \"Vindozo\"-klavo"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Surmetingoj devas enteni nur alfanumerajn signojn"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menuo\"-klavo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "Kiun printsistemo vi deziras uzi?"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
+msgid "See hardware info"
+msgstr "Vidu hardvaran informon"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Unua sektoro de starta subdisko"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid "Printer manufacturer, model"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "PDQ - Print, Don't Queue"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Right Alt key"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
+"[OPCIOJ]...\n"
+"Konfigurilo de Mandrak-Terminal-Servilo\n"
+"--enable : ebligu MTS\n"
+"--disable : malebligu MTS\n"
+"--start : startigu MTS\n"
+"--stop : haltigu MTS\n"
+"--adduser : aldonu ekzistantan sistem-uzulon al MTS (postulas "
+"uzulnomon)\n"
+"--deluser : forigu ekzistantan sistem-uzulon de MTS (postulas "
+"uzulnomon)\n"
+"--addclient : aldonu kliento-ma艥inon al MTS (postulas MAC-adreson, IP, "
+"nbi image-nomon)\n"
+"--delclient : forigu kliento-ma艥inon de MTS (postulas MAC-adreson, IP, "
+"nbi image nomon)"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslava (latina)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Usona klavaro"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"La du gravegaj parametroj estas la vertikala refre艥igrapido (vertical\n"
+"refresh rate) kiu estas la rapido por refre艥igi la tutan ekranon, kaj\n"
+"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
+"la rapido por montri skanliniojn.\n"
+"\n"
+"臏i estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
+"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
+"difektus vian ekranon. Se vi dubas, elektu zorgeman opcion."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Unui臐inta Regna klavaro"
+msgid "Modify"
+msgstr "艤an臐u"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrajna"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Taja klavaro"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV estas protokolo kiu ebligas al vi kro膲i interretservilan dosierujon\n"
+"loke, kaj trakti 臐in kvaza怒 lokan dosiersistemon (kondi膲e ke la retservilo "
+"estu\n"
+"konfigurita kiel WebDAV-servilo). Se vi deziras aldoni WebDAF-kro膲punktojn,\n"
+"elektu \"New\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Taja klavaro"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamila (skribma艥ina)"
+msgid "new"
+msgstr "nova"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamila (ISCII)"
+msgid "Would you like to try again?"
+msgstr "膱u vi 艥atus reprovi?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serba (cirila)"
+msgid "Wizard"
+msgstr "Sor膲isto"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "Malinstalu printvicon"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovena"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Vi bezonas restarti por la 艥an臐oj al la subdisktabelo efektivigi"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swedish"
-msgstr "Sveda"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rusa (Yawerty-a)"
+msgid "Please, choose your keyboard layout."
+msgstr "Bonvole, elektu vian klavaran aran臐on."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Russian"
-msgstr "Rusa"
+msgid "Standard"
+msgstr "La怒norma"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
+msgid "Please choose your mouse type."
+msgstr "Bonvole, elektu la specon de via muso."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
+msgid "Connect..."
+msgstr "Konektu..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Malsukcesis konfiguri la printilon \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugala"
+msgid "not configured"
+msgstr "ne konfigurita"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pola (qwertz aran臐o)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pola (qwerty aran臐o)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "膱esigu"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norvega"
+msgid "Proxies configuration"
+msgstr "Konfigurado de prokuraj serviloj"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Nederlanda"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malta (US)"
+msgid "Start: sector %s\n"
+msgstr "Komenco: sektoro %s\n"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Maltese (UK)"
-msgstr "Malta (UK)"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "Ekrano ne estas konfigurata"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongola (cirila)"
+msgid "Couldn't access the floppy!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Mianmara (burma)"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedona"
+msgid "Mail Server"
+msgstr "Retpo艥t-servilo"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malajalama"
+msgid "Please click on a partition"
+msgstr "Bonvolu klaki sur subdiskon"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Latvian"
-msgstr "Latva"
+msgid "Linux"
+msgstr "Linukso"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
+msgid "across Network"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
+msgid "Upgrade %s"
+msgstr "臏isdatigu %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laosa"
+msgid "Select Printer Connection"
+msgstr "Elektu Printilan Konekton"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Latin American"
-msgstr "Latinamerika"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korea klavaro"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japana 106 klavoj"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Inuktitut"
-msgstr "inuita"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"La interreta superservila demono (kutime nomata inetd) lan膲as sortimenton\n"
+"da aliaj interretaj servoj la怒bezone. 臏i respondas por la lan膲o de multaj\n"
+"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin. Se vi mal艥altas inetd,\n"
+"ve mal艥altas 膲iujn el la servoj por kiuj 臐i respondas."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Italian"
-msgstr "Itala"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icelandic"
-msgstr "Islanda"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Iranian"
-msgstr "Irana"
+msgid "Argentina"
+msgstr "Argentino"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israela (fonetika)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israela"
+msgid "Domain Name Server"
+msgstr "Domajn-nom-servilo"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Croatian"
-msgstr "Kroata"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Elektas sekurnivelon"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Hungara"
+msgid "Mount points must begin with a leading /"
+msgstr "Surmetingoj devas komenci kun anta怒a /"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Gurmukhi"
-msgstr "gumurka"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Datumbazoj"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "gujarata"
+msgid "Quit without saving"
+msgstr "膱u eliru sen konservi"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Greek"
-msgstr "Greka"
+msgid "Yemen"
+msgstr "Jemeno"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aran臐o)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aran臐o)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "French"
-msgstr "Franca"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finna"
+msgid "Hard drive detection"
+msgstr "Detektado de fiksdisko(j)"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Hispana"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Vi ne elektis paka牡grupon.\n"
+"Bonvole elektu la minimuman instaladon kiun vi deziras:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Estonian"
-msgstr "Estona"
+msgid "Please enter the WebDAV server URL"
+msgstr "Bonvole entajpu la servilan URL de la WebDAV"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-a (Sveda)"
+msgid "Tajikistan"
+msgstr "Ta臐ikistano"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
+msgid "Accept"
+msgstr "Akceptu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak-a (US)"
+msgid "Description"
+msgstr "Priskribo"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dana"
+msgid "Error opening %s for writing: %s"
+msgstr "Eraro dum malfermado de %s por skribi: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "devanagara"
+msgid "Mouse type: %s\n"
+msgstr "Speco de muso: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German"
-msgstr "Germana"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Bonvole, elektu vian klavaran aran臐on."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "膱e磨a (QWERTY)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "膱e磨a (QWERTZ)"
+msgid "Expert Area"
+msgstr "Spertulejo"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Svisa (franca aran臐o)"
+msgid "Choose a monitor"
+msgstr "Elektu ekranon"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Svisa (germana aran臐o)"
+msgid "Empty label not allowed"
+msgstr "Malplena etikedo ne estas permesata"
#: ../../keyboard.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Belarusa"
+msgid "Maltese (UK)"
+msgstr "Malta (UK)"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosna"
+msgid "I can't add any more partition"
+msgstr "Mi ne povas aldoni plu da subdiskoj"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
+msgid "Size in MB: "
+msgstr "Grandeco en MB: "
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara (BDS)"
+msgid "Remote printer"
+msgstr "Malproksima printilo"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgara (fonetika)"
+msgid "Please choose a language to use."
+msgstr "Bonvole elektu lingvon por uzi."
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Bengali"
-msgstr "bengala"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"AVERTO: 膱i tiu aparato estis anta怒e konfigurita por konekti al la "
+"Interreto.\n"
+"Simple akceptu konservi la konfiguron de 膲i tiu aparato.\n"
+"Se vi modifos la subajn kampojn, vi 艥an臐os 膲i tiun konfiguron."
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Mi povas konfiguri vian komputilon por a怒tomate enirigi unu uzulon"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaj臐ana (latina)"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formatu"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Arabic"
-msgstr "araba"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetika)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Printilo"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armena (skribma艥ina)"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armena (malnova)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albana"
+msgid "First sector of the root partition"
+msgstr "Unua sektoro de radika subdisko"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish"
-msgstr "Pola"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Printas provpa臐o(j)n..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak-a"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabvo"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zambio"
+msgid "Cape Verde"
+msgstr "Kabo-Verdo"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
-msgstr "Sud-Afriko"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Serbia"
-msgstr "serba"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "majota"
+msgid "Guam"
+msgstr "Gvamo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Jemeno"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Samoa"
-msgstr "Samoo"
+msgid "/Options/Test"
+msgstr "/Opcioj/Provu"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "valis-kaj-futuna"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"vi devus uzi 膲i tiun nivelon zorge. 臏i faras vian komputilon pli facila\n"
+"por uzi, sed delikatega: vi devus neniam uzi 臐i surrete.\n"
+"臏i ne havas pasvortojn."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatuo"
+msgid "Mounting partition %s"
+msgstr "Enkro膲as subdiskon %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vjetnamio"
+msgid "User name"
+msgstr "Salutnomo"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Insuloj Virgaj (Usonaj)"
+msgid "New configuration (isdn-light)"
+msgstr "Nova konfigura牡o (isdn-light)"
-#: ../../lang.pm:1
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Insuloj Virgaj (Britaj)"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Printilo"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuelo"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Kiun subdiskon vi deziras uzi por Linux4Win?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Sent-Vincento kaj la Grenadinoj"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Dosiersistemo konfiguro"
-#: ../../lang.pm:1
-#, c-format
-msgid "Vatican"
-msgstr "Vatikano"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Provu pordojn"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistano"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Urugvajo"
+msgid "Checking %s"
+msgstr "Kontrolanta %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "usonaj malgrandaj eksteraj insuloj"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Ing-Printilaj Opcioj"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Uganda"
-msgstr "Ugando"
+msgid "Card mem (DMA)"
+msgstr "Memoro de Karto (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukrajno"
+msgid "France"
+msgstr "Francio"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tanzania"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Taiwan"
-msgstr "Tajvano"
+msgid "Checking installed software..."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Malproksima po艥tejo"
-#: ../../lang.pm:1
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidado kaj Tobago"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "膱u vi deziras provi printado?"
#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Turkujo"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Tongo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr "Tunizio"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistano"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr "Orienta Timoro"
-
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Tokelau"
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tajikistan"
-msgstr "Ta臐ikistano"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tajlando"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 butonoj"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "francaj sudaj teritorioj"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-#: ../../lang.pm:1
-#, c-format
-msgid "Chad"
-msgstr "膱ado"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Muso"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svazilando"
+msgid "Hardware"
+msgstr "Aparataro"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syria"
-msgstr "Sirio"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "Salvadoro"
+msgid "United States"
+msgstr "Usono"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao-Tomeo kaj Principeo"
+msgid "Default OS?"
+msgstr "Defa怒lta Mastruma Sistemo?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinamo"
+msgid "Swiss (German layout)"
+msgstr "Svisa (germana aran臐o)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somalujo"
+msgid "Configure all heads independently"
+msgstr "Konfiguru 膲iujn kapojn sendepende"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegalio"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San-Marino"
+msgid "NTP Server"
+msgstr "NTP Servilo"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Siera-Leono"
+msgid "Load/Save on floppy"
+msgstr "艤argu/Konservu sur disketo"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakujo"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Spicbergo kaj Jan-Majen-Insuloj"
+msgid "nice"
+msgstr "agrabla(j)"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenujo"
+msgid "Leaving in %d seconds"
+msgstr "Eliras post %d sekundoj"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sankt-Heleno"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapuro"
+msgid "Country"
+msgstr "Lando"
-#: ../../lang.pm:1
-#, c-format
-msgid "Sudan"
-msgstr "Sudano"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Pordo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Seychelles"
-msgstr "Sej艥eloj"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Salomon-Insuloj"
+msgid "LAN Configuration"
+msgstr "LAN Konfigura牡o"
#: ../../lang.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Sa怒da Arabujo"
+msgid "Ghana"
+msgstr "Ganao"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruando"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Russia"
-msgstr "Rusio"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "LAN Konfigura牡o"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Romania"
-msgstr "Rumanujo"
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Reunion"
-msgstr "Reunio"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Kataro"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Palau"
-msgstr "Pala怒o"
+msgid "There was an error installing packages:"
+msgstr "Estis eraro dum instalado de paka牡oj:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Paraguay"
-msgstr "Paragvajo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "Interreta Konfigurado"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugalujo"
+msgid "Undo"
+msgstr "Malfaru"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palestine"
-msgstr "Palestino"
+msgid "Save partition table"
+msgstr "Konservu la subdiskotabelon"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Porto-Riko"
+msgid "Finnish"
+msgstr "Finna"
#: ../../lang.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitkarna Insulo"
+msgid "Macedonia"
+msgstr "Macedonio"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sanpetro-kaj-Mikelono"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Poland"
-msgstr "Pollando"
+msgid "Slovenian"
+msgstr "Slovena"
#: ../../lang.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistano"
+msgid "Libya"
+msgstr "Libio"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Philippines"
-msgstr "Filipinoj"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papuo-Nov-Gvineo"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Polynesia"
-msgstr "Franca Polinezio"
+msgid "Table"
+msgstr "Tabelo"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peruo"
+msgid "I don't know how to format %s in type %s"
+msgstr "ne scias kiel formati %s kiel speco %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Panama"
-msgstr "Panamo"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Muso"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Oman"
-msgstr "Omano"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "New Zealand"
-msgstr "Nov-Zelando"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS Servilo"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Niue"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Nauru"
-msgstr "Nauro"
-
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Nepalo"
+msgid "Modem"
+msgstr "Modemo"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragvo"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Ni臐erio"
+msgid "Tuvalu"
+msgstr "Tuvalo"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkaj Insuloj"
+msgid "Use auto detection"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Niger"
-msgstr "Ni臐ero"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM aldonas subtenon por musoj al teksta-re臐imaj Linuksaj aplikoj ekzemple\n"
+"la 'Midnight Commander' (Meznokta Estro). Anka怒 臐i permesas uzi la muson\n"
+"por transpo艥igi 膲e la konzolo (Sen X Fenestroj)."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nov-Kaledonio"
+msgid "Started on boot"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Namibia"
-msgstr "Namibio"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambiko"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malajzio"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mexico"
-msgstr "Meksikio"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Malawi"
-msgstr "Malavio"
+msgid "East Timor"
+msgstr "Orienta Timoro"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Maldives"
-msgstr "Maldivoj"
+msgid "Del profile..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Ma怒ricio"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malto"
+msgid "Installing Foomatic..."
+msgstr "Instalanta Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserato"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
+"Bonvole adia怒u kaj sekve uzu Kontrol-Alt-Retropa艥o (Ctrl-Alt-Backspace)."
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Ma怒rlando"
+msgid "detected"
+msgstr "detektita"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martiniko"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr ""
+"La reto devas esti restartigita.\n"
+"膱u vi deziras restartigi 臐in?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Insuloj Marianaj Nordaj"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Elektado de Paka牡oj"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolio"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Mianmaro"
+msgid "SECURITY WARNING!"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Mali"
-msgstr "Malio"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Oficejo"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedonio"
+msgid "No, I don't want autologin"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Insuloj Mar艥alaj"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskaro"
+msgid "All languages"
+msgstr "膱iuj lingvoj"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldovio"
+msgid "Removing %s"
+msgstr "Mi forigas %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "Testing your connection..."
+msgstr "Testante vian konekta牡on..."
-#: ../../lang.pm:1
-#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "grandeco de pecoj"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Libya"
-msgstr "Libio"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankora怒\n"
+"ne rekomendita."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Latvio"
+msgid "Start sector: "
+msgstr "Komenca sektoro: "
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburgo"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazavilo)"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Litovio"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "膱i tiu paka牡o %s devas esti instalita. 膱u vi deziras instali 臐in?"
#: ../../lang.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "Seychelles"
+msgstr "Sej艥eloj"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Liberio"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanko"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Neniu pasvorto"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Li磨ten艥tejno"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Sent-Lucio"
+msgid "Zambia"
+msgstr "Zambio"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Libano"
+msgid "Security Administrator (login or email)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Laos"
-msgstr "Laoso"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kaza磨stano"
+msgid "Romanian (qwerty)"
+msgstr "Rumana (qwerty-a)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmana Insularo"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuvajto"
+msgid "Czech Republic"
+msgstr "la 膱e磨a Respubliko"
#: ../../lang.pm:1
#, c-format
-msgid "Korea"
-msgstr "Koreio"
+msgid "Egypt"
+msgstr "Egipto"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Koreio (Norda)"
+msgid "Old configuration (isdn4net)"
+msgstr "Malnova konfigra牡o (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Sent-Kristofo kaj Neviso"
+msgid "Sound card"
+msgstr "Sonkarto"
-#: ../../lang.pm:1
-#, c-format
-msgid "Comoros"
-msgstr "Komoroj"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Formatu subdiskojn"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribato"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Vi havas unu grandan MicroSoft-Vindozan subdiskon.\n"
+"Mi proponas ke vi unue regrandecigu tiun subdiskon\n"
+"(klaku sur 臐in, kaj poste klaku sur \"Regrandecigu\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambo臐o"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgizistano"
+msgid "Change partition type"
+msgstr "艤an臐u subdiskspecon"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenjo"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Japan"
-msgstr "Japanio"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Modulaj opcioj:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jordan"
-msgstr "Jordanio"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamajko"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Islando"
+msgid "(on %s)"
+msgstr "(sur %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Iran"
-msgstr "Irano"
+msgid "MM Series"
+msgstr "MM Serio"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irako"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "average"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "India"
-msgstr "Hindio"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Neniu printilo"
#: ../../lang.pm:1
#, c-format
-msgid "Israel"
-msgstr "Israelo"
+msgid "Equatorial Guinea"
+msgstr "Ekvatora Gvineo"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irlando"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Indonezio"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Malbona rezerva dosiero"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hungario"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haitio"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatio"
+msgid "Romanian (qwertz)"
+msgstr "Rumana (qwertz-a)"
-#: ../../lang.pm:1
-#, c-format
-msgid "Honduras"
-msgstr "Honduro"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "rekonfiguru"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard- kaj McDonald-Insuloj"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"La routed dajmono permesas a怒tomatan 臐isdatigon de la IP enkursigila tabelo\n"
+"per la RIP protokolo. Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
+"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
#: ../../lang.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hongkongo"
+msgid "Kiribati"
+msgstr "Kiribato"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "China"
-msgstr "膱inio"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Guyana"
-msgstr "Gujano"
+msgid "Browse"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineo-Bisa怒o"
+msgid "CDROM"
+msgstr "KDROMO"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Guam"
-msgstr "Gvamo"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "膱u vi deziras provi konekti al la interreto nun?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "Gvatemalo"
+msgid "Belgian"
+msgstr "Belga"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Sud-Georgio kaj la Sudaj Sandvi膲aj Insuloj"
+msgid "Do you have an ISA sound card?"
+msgstr "膱u vi havas ISA-sonkarton?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatora Gvineo"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Mi ne detektas eterretan retadaptilom sur via sistemo.\n"
+"Mi ne povas konfiguri tiun konektotipon."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadelupo"
+msgid "Windows"
+msgstr "Vindozo"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Guinea"
-msgstr "Gvineo"
+msgid "Can't make screenshots before partitioning"
+msgstr "Mi ne povas fari ekranfotojn anta怒 ol fari subdiskojn"
-#: ../../lang.pm:1
-#, c-format
-msgid "Gambia"
-msgstr "Gambio"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Po艥tejo"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Greenland"
-msgstr "Groenlando"
+msgid "/File/Save _As"
+msgstr "/Dosiero/Savu _Kiel"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "臏ibraltaro"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghana"
-msgstr "Ganao"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Franca Gujano"
+msgid "Delay before booting default image"
+msgstr "Prokrastoperiodo anta怒 starti defa怒ltan sistemon"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Kartvelujo"
+msgid "Restrict command line options"
+msgstr "Limigu komandliniajn opciojn"
-#: ../../lang.pm:1
-#, c-format
-msgid "Grenada"
-msgstr "Grenado"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "E怒ropo"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Unui臐inta Regno"
+msgid "Use free space"
+msgstr "Uzu liberan spacon"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabono"
+msgid "use dhcp"
+msgstr "uzu dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Faroe Islands"
+msgid "Mail alert"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronezio"
+msgid "Internet configuration"
+msgstr "Interreta konfigurado"
#: ../../lang.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandaj Insuloj (Malvinoj)"
+msgid "Uzbekistan"
+msgstr "Uzbekistano"
-#: ../../lang.pm:1
-#, c-format
-msgid "Fiji"
-msgstr "Fi臐io"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "Duobla surmetingo %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Finland"
-msgstr "Finnlando"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Malproksima printilo"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopio"
+msgid "Finish"
+msgstr "Finu"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Spain"
-msgstr "Hispanujo"
+msgid "Show automatically selected packages"
+msgstr "Montru a怒tomate elektitajn paka牡ojn"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritreo"
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Okcidenta Saharo"
+msgid "Togo"
+msgstr "Togo"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Egypt"
-msgstr "Egipto"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Estonia"
-msgstr "Estonio"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Ekvadoro"
+msgid "Please try again"
+msgstr "Bonvole provu denove"
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Al臐erio"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "膱u tio 膲i pravas?"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Domingo"
+msgid "FAT resizing failed: %s"
+msgstr "Regrandeci臐o de FAT malsukcesis: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominiko"
+msgid "Individual package selection"
+msgstr "Elektado de individuaj paka牡oj"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danlando"
+msgid "This partition is not resizeable"
+msgstr "膱i tiu subdisko ne estas regrandecigebla"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "臏ibutio"
+msgid "Location"
+msgstr "Loko"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cyprus"
-msgstr "Kipro"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Kristnask-Insulo"
+msgid "Journalised FS"
+msgstr "Journalised FS"
#: ../../lang.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kabo-Verdo"
+msgid "Guatemala"
+msgstr "Gvatemalo"
-#: ../../lang.pm:1
-#, c-format
-msgid "Cuba"
-msgstr "Kubo"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "konformanta(j)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Kolombio"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cameroon"
-msgstr "Kameruno"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Chile"
-msgstr "膱ilio"
+msgid "Bahrain"
+msgstr "Barejno"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cook Islands"
-msgstr "Kuk-Insularo"
+msgid "omit scsi modules"
+msgstr "forlasu SCSI-ajn modulojn"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Ebur-Bordo"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Svislando"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazavilo)"
+msgid "Keyboard layout: %s\n"
+msgstr "Klavara aran臐o: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Centrafrika Respubliko"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kin艥aso)"
+msgid "Maltese (US)"
+msgstr "Malta (US)"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos-Insuloj (Keeling)"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Muntas kaj malmuntas 膲iujn RetDosierSistemajn (NFS), SMB (Lan\n"
+"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanado"
+msgid "Tvcard"
+msgstr "Tvcard"
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Belizio"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "艤an臐u al Normala re臐imo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Belarus"
-msgstr "Belarusio"
+msgid "Size"
+msgstr "Grandeco"
-#: ../../lang.pm:1
-#, c-format
-msgid "Botswana"
-msgstr "Bocvano"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
#: ../../lang.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Buvet-Insulo"
+msgid "Greenland"
+msgstr "Groenlando"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Butano"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Lo臐iteka MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamoj"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Brazil"
-msgstr "Brazilo"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivio"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Elektu dosieron"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunejo Darusalamo"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermudo"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benino"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Kiun konfiguron de XFree vi deziras havi?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundo"
+msgid "More"
+msgstr "Plu"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bahrain"
-msgstr "Barejno"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Kun 膲i tiu sekurnivelo, uzado de 膲i tiu komputilo kiel servilo ebli臐as.\n"
+"La sekureco nun estas sufi膲e alta por uzi la sistemon kiel servilo kiu\n"
+"akceptas konektojn de multaj klientoj."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgario"
+msgid "Account Password"
+msgstr "Konta Pasvorto"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkino"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Vi decidis instali la startilon en subdiskon.\n"
+"Tio implicas ke vi jam havas startilon sur la fiskdisko kiun vi startigas "
+"(ekz-e: System Commander).\n"
+"\n"
+"En kiu drajvo vi startigas?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr "Banglade艥o"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "Taja klavaro"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbado"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnio-Hercegovino"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Surmetingo"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaj臐ano"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Aruba"
-msgstr "Arubo"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"艤ajne vi havas malnovegan a怒 nekonatan ma艥inon,\n"
+"la yaboot-startilo ne funkcios por vi.\n"
+"La instalado da怒rigos, sed vi devos\n"
+"uzi BootX a怒 alian rimedon por startigi vian ma艥inon"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Australia"
-msgstr "Auxstralio"
+msgid "Select file"
+msgstr "Elektu dosieron"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerika Samoo"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentino"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktio"
+msgid "Japan"
+msgstr "Japanio"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Printilaj opcioj"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
-msgstr "Angolo"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nederlandaj Antiloj"
+msgid "Search servers"
+msgstr "Ser膲u servilojn"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenio"
+msgid "NCP queue name missing!"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Albania"
-msgstr "Albanio"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Angilo"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "KDROM etikedata \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigvo-Barbudo"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Savas kaj resta怒ras sisteman entropikomuna牡on por pli altkvalita\n"
+"generado de aleatoraj nombroj."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Unui臐intaj Arabaj Emirlandoj"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Mi malsukcesis kontroli la dosiersistemon %s. 膱u vi deziras ripari la "
+"erarojn? (atentu, vi povas perdi datenojn)"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Andorra"
-msgstr "Andoro"
+msgid "Turn your computer into a reliable server"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistano"
+msgid " (driver %s)"
+msgstr " (pelilo: %s)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Retrokonekta(j) dosiero(j):\n"
+"...%s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
+msgid "I don't know"
+msgstr "Mi ne scias"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Forigu la logikajn spacojn unue\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA-subteno ne ekzistas plu por 2.2-kernoj. Bonvole uzu 2.4-kernon."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Via karto nun uzas la %s\"%s\"-pelilon (defa怒lta plelilo por via karto estas "
+"\"%s\")"
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Por aktivigi la muson,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Eliru instalprogramon"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Neniu Muso"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Elektas sekurnivelon"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "neniu"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongola (cirila)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "3 butonoj"
+msgid "Add a module"
+msgstr "Aldonu modulon"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 butonoj"
+msgid "Profile to delete:"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "1 butona"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Lokaj dosieroj"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "bus-muso"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Konta Salutnomo (uzula nomo)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Lo臐iteka Muso (seria, malnova C7 speco)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Serio"
+msgid "Benin"
+msgstr "Benino"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "Urugvajo"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Lo臐iteka MouseMan+/FirstMouse+"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Elektado de individuaj paka牡oj"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Lo臐iteka CC serio"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Ekrano: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Lo臐iteka MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Io malbona okazas en via drajvo.\n"
+"Testo pri la integreco de datenoj malsukcesis.\n"
+"Tio signifas ke skribado al la disko fini臐os per difektitaj datenoj."
-#: ../../mouse.pm:1
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Printilaj Po艥tejo"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "serial"
-msgstr "seria"
+msgid "Bangladesh"
+msgstr "Banglade艥o"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Mikrosofta Esplorilo"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rado"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic"
-msgstr "Genera"
+msgid "Initial tests"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "膱u mi devus da怒ri?"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "Akomodata"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Lo臐iteka MouseMan+"
+msgid "Script-based"
+msgstr "Programeto-bazata"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Standard"
-msgstr "La怒norma"
+msgid "Error reading file %s"
+msgstr "Eraro legante dosiero %s"
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
+msgid "PLL setting:"
+msgstr "PLL-konfigura牡o:"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "艤an臐u inter ebena kaj ordigita je grupoj"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Vi devas havi FAT-subdiskon en /boot/efi"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
+msgid "The URL must begin with http:// or https://"
+msgstr "La URL devas komenci per http:// a怒 https://"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "Informo"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "膱u tio 膲i pravas?"
+msgid "Other OS (SunOS...)"
+msgstr "Alia Mastruma Sistemo (SunOS...)"
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "Instalado/臏isdatigo"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
+msgid "%d packages"
+msgstr "%d paka牡oj"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Savkopi- kaj Resta怒ro-akplika牡o\n"
+"\n"
+"--default : savu defa怒ltajn dosierujojn.\n"
+"--debug : montru 膲iujn ripar-mesa臐ojn (debug).\n"
+"--show-conf : listo de dosieroj a怒 dosierujoj savendaj.\n"
+"--config-info : klarigu la opciojn de konfigurado-dosieroj (por ne-X-"
+"uzuloj).\n"
+"--daemon : uzu demonan konfiguradon. \n"
+"--help : montru tiun 膲i mesa臐on.\n"
+"--version : montru la versi-numeron.\n"
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Resta怒ris el dosiero %s malsukcesis: %s"
+msgid "Domain Authentication Required"
+msgstr "A怒tentikigado de domajno postulata"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi 臐in.\n"
-"La sola solvo estas movi viajn 膲efajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "膱i tiu platformo ne subtenas etendatajn subdiskojn"
+msgid "Costa Rica"
+msgstr "Kostariko"
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "Elektu opciojn por servilo"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "elbe"
+msgid "Icelandic"
+msgstr "Islanda"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "agrabla(j)"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Uzado: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "tre agrabla(j)"
+msgid "Please relog into %s to activate the changes"
+msgstr "Bonvolu resaluti en %s-n por aktivigi la 艥an臐ojn."
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "important"
-msgstr "grava(j)"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "must have"
-msgstr "havenda"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modalo"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufi膲aj subdiskoj por RAID nivelo %d\n"
+msgid "Output"
+msgstr "Skribu"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid malsukcesis"
+msgid "Circular mounts %s\n"
+msgstr "Cirklaj surmetingoj %s\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid malsukcesis (eble raidtools mankas)"
+msgid "Martinique"
+msgstr "Martiniko"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Stop"
-msgstr "Haltu"
+msgid "a number"
+msgstr "numero"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start"
-msgstr "Startu"
+msgid "Swedish"
+msgstr "Sveda"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr "Startante"
+msgid "Which %s driver should I try?"
+msgstr "Kiun %s pelilon devus mi provi?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"Ne pli da informo\n"
-"pri tiu servo, beda怒rinde."
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servoj kaj demonoj"
+msgid "Filesystem types:"
+msgstr "Specoj de dosiersistemoj:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "haltigita"
+msgid ", multi-function device on HP JetDirect"
+msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "ruli臐ante"
+msgid "Northern Mariana Islands"
+msgstr "Insuloj Marianaj Nordaj"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Elektu kiuj servoj estu a怒tomate startigotaj dum starto"
+msgid "none"
+msgstr "neniu"
-#: ../../services.pm:1
-#, c-format
-msgid "Database Server"
-msgstr "Datumbaz-servilo"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Salutnomo"
-#: ../../services.pm:1
-#, c-format
-msgid "Remote Administration"
-msgstr "Malproksima administrado"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "Bonvole provu denove"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
-msgstr "Dosier-kundivido"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet"
-msgstr "Interreto"
+msgid "Floppy"
+msgstr "Disketo"
-#: ../../services.pm:1
-#, c-format
-msgid "Printing"
-msgstr "Presante"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Bonvolu klaki sur subdiskon"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startigas la X tiparan servilon (tio estas ... ."
+msgid "Ghostscript referencing"
+msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "艤argu la pelilojn por via usb-aparatoj."
+msgid "Bootloader"
+msgstr "Start艥argilo"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesa臐ojn al diversaj sistemlogdosieroj. 臏i estas bona ideo 膲iam uzi\n"
-"syslog."
+msgid "Move"
+msgstr "Movu"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lan膲u la sonsistemon en via ma艥ino"
+msgid "Bootloader to use"
+msgstr "Start艥argilo por uzi"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de 膲iuj el la uzuloj\n"
-"konektataj 膲e komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
+msgid "SMB server host"
+msgstr "Po艥tejo de SMB servilo"
-#: ../../services.pm:1
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj 膲e aliaj respondantaj komputiloj."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS Servilo"
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
+"\n"
+"Averto\n"
+"Bonvolu zorge legi la suban tekston. Se vi malsamopinias kun iu\n"
+"parto, vi ne rajtas instali la venontan KD-enhavon. Premu 'Rifuzas'\n"
+"por da怒rigi la instaladon sen uzi tiun KD-enhavon.\n"
+"\n"
+"\n"
+"Iuj komponantoj entenataj en la venonta KD ne estas regataj\n"
+"de la GPL-licenco a怒 similaj interkonsentoj. 膱iu tia komponanto estas\n"
+"tiam regata de la teksto kaj kondi膲oj de 臐ia propra specifa licenco.\n"
+"Bonvolu zorge legi tiajn specifajn licencojn kaj agi la怒 ili anta怒\n"
+"ol uzi a怒 redisdoni la nomitajn komponantojn.\n"
+"Tiaj licencoj 臐enerale malhelpas transdonon, duobligon\n"
+"(escepte por savkopioj), redistribuadon, 'reverse engineering',\n"
+"malmuntadon, malkompiladon a怒 modifadon de la komponento.\n"
+"膱ia rompo de la konsento tuj 膲esigos viajn rajtojn sub\n"
+"la respektiva licenco. Escepte se la specifa licenco donas al vi tiajn\n"
+"rajtojn, vi kutime ne povas instali la programojn sur pli ol unu\n"
+"sistemo, a怒 adapti 臐in por uzi 臐in en reto. En duba kazo bonvole kontaktu\n"
+"rekte la disdoninton a怒 la eldoninton de la komponanto.\n"
+"Transdonado al triaj partoj a怒 kopiado de tiaj komponantoj inkluzive de la \n"
+"dokumenta牡o normale estas malpermesita.\n"
+"\n"
+"\n"
+"膱iuj rajtoj pri la komponantoj de la venonta KD apartenas al ties\n"
+"respektivaj a怒toroj kaj estas protektataj de le臐oj pri intelekta propra牡o "
+"kaj\n"
+"kopirajto aplikeblaj al softvaraj programoj.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"La routed dajmono permesas a怒tomatan 臐isdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo. Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
#: ../../services.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
+"Linuksa Virtuala servilo, uzata por starigi kapablegan kaj\n"
+"bonege atingeblan servilon."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj resta怒ras sisteman entropikomuna牡on por pli altkvalita\n"
-"generado de aleatoraj nombroj."
+msgid "4 billion colors (32 bits)"
+msgstr "4 miliardoj koloroj (32 bitoj)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix estas Po艥tTransportPerilo, kiu estas la programo kiu movas\n"
-"retpo艥ton de unu komputilo al alia."
+msgid "Micronesia"
+msgstr "Mikronezio"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata 膲e komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
+msgid "License"
+msgstr "Licenco"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"PCMCIA subteno kutime estas subteno de a牡o kiel ethernet kaj modemoj en\n"
-"tekkomputiloj. 臏i ne estos lan膲ata krom se vi konfiguras 臐i por ke 臐i\n"
-"estu sendan臐era 膲e komputiloj kiuj ne bezonas 臐in."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Subteno de OKI 4w kaj kongruaj winpresiloj."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"膱i tiu servo provizas NFS dosier艥losado."
+"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
+"novajn dosiersistemojn. Bonvolu kontroli vian ekipa牡on por la ka怒zo de 膲i "
+"tiu problemo."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "Kiun printsistemo vi deziras uzi?"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"膱i tiu servo provizas NFS dosier艥losado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
+msgid "Do you want to start the connection at boot?"
+msgstr "膱u vi deziras starti vian konekta牡on je startado de la sistemo?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Processor ID"
msgstr ""
-"艤altas/Mal艥altas 膲iujn retajn interfacojn konfiguratajn por lan膲i\n"
-"dum sistemstartado."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "Sound trouble shooting"
msgstr ""
-"Muntas kaj malmuntas 膲iujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"po艥tejojn de IP adresoj."
+msgid "Polish (qwerty layout)"
+msgstr "Pola (qwerty aran臐o)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "Aktiva"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Linuksa Virtuala servilo, uzata por starigi kapablegan kaj\n"
-"bonege atingeblan servilon."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr ta怒ge funkcii. 臏i estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Host \"%s\", port %s"
msgstr ""
-"Linuxconf aran臐os kelkfoje por fari diversajn taskojn\n"
-"dum starto por da怒rigi la sistem-konfigura牡on."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Auxtomata detektado kaj konfigurado de aparataro dum starto."
+msgid "This partition can't be used for loopback"
+msgstr "Vi ne povas uzi 膲i tiun subdiskon por retrokonektado"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Auxtomata regenerado de kernokapoj en /boot por\n"
-"/usr/include/linux/{autoconf, version}.h"
+msgid "File already exists. Use it?"
+msgstr "Dosiero jam ekzistas. 膱u vi deziras uzi 臐in?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "received: "
msgstr ""
-"膱i tiu paka牡o 艥argas la elektitan klavarmapon la怒 /etc/sysconfig/keyboard.\n"
-"Vi povas elekti 膲i tion per la kbdconfig utilprogramo. Vi lasus 膲i tion\n"
-"ebligatan por la plejmulto da sistemoj."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Right Alt key"
msgstr ""
-"Lan膲u paka牡filtradon por Linuksa kerno 2.2-serioj, por konfiguri\n"
-"brulmuron por protekti vian ma艥inon kotra怒 elretaj atakoj."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lan膲as sortimenton\n"
-"da aliaj interretaj servoj la怒bezone. 臏i respondas por la lan膲o de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin. Se vi mal艥altas inetd,\n"
-"ve mal艥altas 膲iujn el la servoj por kiuj 臐i respondas."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache estas Tut-Tera Teksa牡a servilo. 臏i liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
+msgid "Gateway"
+msgstr "Kluzo"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Printilo"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake rulas aparato-provon, kaj la怒opcie konfiguras\n"
-"novan/艥an臐itan aparataron."
+msgid "Tonga"
+msgstr "Tongo"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-re臐imaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro). Anka怒 臐i permesas uzi la muson\n"
-"por transpo艥igi 膲e la konzolo (Sen X Fenestroj)."
+msgid "Tunisia"
+msgstr "Tunizio"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Profile: "
+msgstr "muntado malsukcesis: "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron estas norma Uniksa programo kiu lan膲as programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj. vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-"Lan膲as ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lan膲as ba膲ajn ordonojn kiam la 艥argmezo estas\n"
-"sufi膲e malgranda."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri 臐in en la\n"
-"sistemlogdosiero (syslog). Vi anka怒 povas uzi 臐in por halti la komputilon\n"
-"kiam la baterio艥argo estas malgranda."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "old static device name used in dev package"
msgstr ""
-"Lan膲u la ALSA (Advanced Linux Sound Architecture - Avancita Linuksa Son-"
-"Arkitekturo)-sonsistemon"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instalanta paka牡ojn..."
+msgid "This label is already used"
+msgstr "膱i tiu etikedo estas jam uzata"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Uzado: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-" [膲io]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
+"Post vi formatas la subdiskon %s, 膲iuj datenoj en 膲i tiu subdisko estos\n"
+"perdata"
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPCIO]...\n"
-" --no-confirmation ne postulu unue konfirmadon en MandrakeUpdate mode\n"
-" --no-verify-rpm ne kontrolu la paka牡-subskribojn\n"
-" --changelog-first afi艥u changelog anta怒 dosierliston en la priskribo-"
-"fenestro\n"
-" --merge-all-rpmnew proponu mergi 膲iujn trovitajn .rpmnew/.rpmsave -"
-"dosierojn"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Speco de konekto"
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"[OPCIOJ]\n"
-"Reto & Interret-konektad kaj afi艥ad-aplika牡o\n"
+"艤an臐u vian KDROM!\n"
"\n"
-"--defaultintf interface : montras tiun interfacon defa怒lte\n"
-"--connect : konektas kun interreto se ne jam konektite\n"
-"--disconnect : malkonektas de interreto se jam konektite\n"
-"--force : uzata kun (dis)connect : trudas (mal-)konektadon.\n"
-"--status : montras 1 se konektite, alie 0, poste eliras.\n"
-"--quiet : ne estu interaktiva. Uzata kun (dis)connect."
+"Bonvole, en艥ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
+"\"\n"
+"kiam vi finos.\n"
+"Se vi ne havas 臐in, klaku \"Nuligu\" por eviti la instaladon de 膲i tiu KDROM."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Use group id for execution"
+msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[klavaro]"
+msgid "Choose the default user:"
+msgstr "Elektu la defa怒ltan uzulon:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPCIOJ]...\n"
-"Konfigurilo de Mandrak-Terminal-Servilo\n"
-"--enable : ebligu MTS\n"
-"--disable : malebligu MTS\n"
-"--start : startigu MTS\n"
-"--stop : haltigu MTS\n"
-"--adduser : aldonu ekzistantan sistem-uzulon al MTS (postulas "
-"uzulnomon)\n"
-"--deluser : forigu ekzistantan sistem-uzulon de MTS (postulas "
-"uzulnomon)\n"
-"--addclient : aldonu kliento-ma艥inon al MTS (postulas MAC-adreson, IP, "
-"nbi image-nomon)\n"
-"--delclient : forigu kliento-ma艥inon de MTS (postulas MAC-adreson, IP, "
-"nbi image nomon)"
+msgid "Gabon"
+msgstr "Gabono"
-#: ../../standalone.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Litertipar-Import-kaj afi艥- aplika牡o \n"
-"--windows_import : importu de 膲iuj atingeblaj vindozaj subdiskoj.\n"
-"--xls_fonts : montru 膲iujn litertiparojn jam ekzistantajn de xls\n"
-"--strong : forta kontrolado de litertiparo.\n"
-"--install : akceptu 膲ian litertipar-dosieron kaj 膲ian dosierujon.\n"
-"--uninstall : malinstalu 膲ian litertiparon kaj 膲ian litertiparan "
-"dosierujon.\n"
-"--replace : anstata怒igu 膲ian litertiparon se jam ekzistas\n"
-"--application : 0 nenia aplika牡o.\n"
-" : 1 膲iuj haveblaj aplika牡oj subtenataj.\n"
-" : name_of_application a怒 iel tiel por staroffice \n"
-" : kaj gs por ghostscript nur por tiu 膲i."
+"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
+"膲i tie; printiloj estos a怒tomate dektektataj. Se vi havas dubojn,\n"
+"elektu \"Malproksima CUPS servilo\"."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"[OPCIOJ] [PROGRAM_NOMO]\n"
-"\n"
-"OPCIOJ:\n"
-" --help - montru tiun help-mesa臐on.\n"
-" --report - programo estu iu de mandrake tools\n"
-" --incident - programo estu iu de mandrake tools"
+"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta怒 la instalado"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Savkopi- kaj Resta怒ro-akplika牡o\n"
-"\n"
-"--default : savu defa怒ltajn dosierujojn.\n"
-"--debug : montru 膲iujn ripar-mesa臐ojn (debug).\n"
-"--show-conf : listo de dosieroj a怒 dosierujoj savendaj.\n"
-"--config-info : klarigu la opciojn de konfigurado-dosieroj (por ne-X-"
-"uzuloj).\n"
-"--daemon : uzu demonan konfiguradon. \n"
-"--help : montru tiun 膲i mesa臐on.\n"
-"--version : montru la versi-numeron.\n"
+msgid "Domain"
+msgstr "Domajno"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-"Tiu 膲i programo estas libera softvaro; vi povas redisdoni 臐in kaj/a怒 modifi\n"
-"臐in sub la termoj de la GNU-臏eneralpublika Licenco kiel publikigita de\n"
-"la Libera Programar Fonda牡o (Free Software Foundation); a怒 versio 2, a怒\n"
-"la怒 via opcio) pli posta versio.\n"
+"LILO kaj grub estas GNU/Linuksaj startigiloj. Normale, tiu pa艥o estas "
+"komplete\n"
+"a怒tomata. DrakX analizos la startsektoron de la disko kaj agas la怒 tio\n"
+"kion 臐i trovas tie:\n"
"\n"
-"Tiu 膲i programo estas disdonata kun la espero ke 臐i estu utila,\n"
-"sed SEN IA GARANTIO; e膲 sen garantio pri MERKATOTAUXGECO a怒\n"
-"TAUXGECO POR APARTA CELO. Vidu la\n"
-"GNU 臏eneralpublikan Licencon pri pli da detaloj.\n"
+" * se 臐i trovas vindozan startsektoron, 臐i anstata怒igos tiun per grub/LILO-"
+"a startsektoro.\n"
+"Tiel vi povos 艥argi a怒 GNU/Linukson a怒 alian mastrumsistemon.\n"
"\n"
-"Vi devus esti ricevinta kopion de la GNU 臏eneralpublika Licenco\n"
-"kun tiu 膲i programo; se ne, skribu al la Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * se 臐i trovas grub- a怒 LILO-startsektoron, 臐i anstata怒igos tiun per "
+"nova.\n"
+"\n"
+" * se 臐i ne povas determini, DrakX demandos vin kien 臐i metu la\n"
+"startigilon.\n"
+"\n"
+"\"Boot device\": En plej multaj okazoj, vi ne 艥an臐u la defa怒ltan (\"Unua\n"
+"sektoro de la disko (MBR)\"), sed se vi preferas, la startigilo povas esti\n"
+"instalata sur la dua fiksdisko (\"/dev/hdb\"), a怒 e膲 sur disketo\n"
+"(\"Sur disketo\")."
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
+msgid "Provider dns 2 (optional)"
+msgstr "Provizanto DNS 2 (nedeviga)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Install updates"
-msgstr "Instalu 臐isdatigojn"
+msgid "Boot device"
+msgstr "Starta aparato"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfiguru servojn"
+msgid "Which partition do you want to resize?"
+msgstr "Kiun subdiskon vi deziras regrandecigi?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Konfiguru X"
+msgid "United States Minor Outlying Islands"
+msgstr "usonaj malgrandaj eksteraj insuloj"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Instalu restart-艥argilon"
+msgid "A tool to monitor your logs"
+msgstr "Ilo por vidi vian logdosieron"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
+msgid "Djibouti"
+msgstr "臏ibutio"
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Aldonu uzulon"
+msgid "detected on port %s"
+msgstr "detektita en pordo %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Root password"
-msgstr "Root-pasvorto"
+msgid "LPD"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Install system"
-msgstr "Instalu sistemon"
+msgid "Graphics card: %s\n"
+msgstr "Grafika karto: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Elektu paka牡ojn"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
-#, c-format
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Bonvolu klaki sur subdiskon"
-#: ../../steps.pm:1
-#, c-format
-msgid "Partitioning"
-msgstr "Subdiskigante"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Elektado de individuaj paka牡oj"
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
+msgid "Extended partition not supported on this platform"
+msgstr "膱i tiu platformo ne subtenas etendatajn subdiskojn"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Elektu instalklason"
+msgid "ISDN Configuration"
+msgstr "ISDN-a Konfigura牡on"
-#: ../../steps.pm:1
-#, c-format
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Alta"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
+msgid "Internet Connection Sharing"
+msgstr "Disdividado de Interreta Konekto"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licenco"
+msgid "Choose file"
+msgstr "Elektu dosieron"
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Language"
-msgstr "Elektu vian lingvon"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Averto. Ekzistanta konfigura牡o de barilo detektata. Vi eble devas permane\n"
+"fiksi 臐in poste de la instalado."
-#: ../../ugtk2.pm:1
-#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Haltas de la reto"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "OK"
-msgstr "Jes"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Printilan Konekton"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Nespecifa PS2 RadoMuso"
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Removing old printer \"%s\"..."
+msgstr "Foriganta la malnovan presilon \"%s\"..."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Elektu grafikan karton"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Malinstalu printvicon"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installad-ekran-pelilo)"
+msgid "French Southern Territories"
+msgstr "francaj sudaj teritorioj"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE 膱I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
+msgid "All data on this partition should be backed-up"
+msgstr "膱iuj datenoj en 膲i tiu subdisko devus esti rezervata"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
+msgid "Installing package %s"
+msgstr "Instalanta paka牡o %s"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s kun 3D aparata akcelado"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE 膱I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-"KOMPUTILON.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
+"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
+"subdiskon"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfiguru nur karton \"%s\"%s"
-
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Uzu Xinerama extension"
+msgid "Choose packages to install"
+msgstr "Elektu paka牡ojn"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfiguru 膲iujn kapojn sendepende"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kiun konfiguron de XFree vi deziras havi?"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"膱iuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree Konfigurado"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Via komputilo ne havas sufi膲e da spaco por instalado a怒 promocio (%d > %d)."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Elektu memorkapaciton de via grafika karto"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Via sistemo subtenas multkapo-konfiguradon.\n"
-"Kion vi deziras fari?"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfigura牡o"
+msgid "Bhutan"
+msgstr "Butano"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose an X server"
-msgstr "Elektu X-servilon"
+msgid "Network interface"
+msgstr "Reta interfaco"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "X servilo"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer data..."
+msgstr "Legas datumbason de CUPS peliloj..."
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB a怒 pli"
+msgid "Korean keyboard"
+msgstr "Korea klavaro"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Not connected"
+msgstr "Ne konektita"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Greek"
+msgstr "Greka"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Saint Kitts and Nevis"
+msgstr "Sent-Kristofo kaj Neviso"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Enable OF Boot?"
+msgstr "膱u ebligi OF Boot?"
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Ekrana vertikala refre艥igrapido (vertical refresh rate): %s\n"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "path"
msgstr ""
-"膱u vi deziras teni la 艥an臐ojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Options"
-msgstr "Opcioj"
+msgid "Mount point"
+msgstr "Surmetingo"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Test"
-msgstr "Testo"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Eraro okazis:\n"
+"%s\n"
+"Provu 艥an臐i iujn parametrojn"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Instalu sistemon"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resolution"
-msgstr "Distingivo"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "Ekrano"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "Grafik-karto"
+msgid "Another one"
+msgstr "Iu alia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikala refre艥igrapido (vertical refresh rate)"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
+msgid "Colombia"
+msgstr "Kolombio"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refre艥igrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refre艥igi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
+"Current configuration of `%s':\n"
"\n"
-"臏i estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon. Se vi dubas, elektu zorgeman opcion."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Vendinto"
-
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
+msgid "Reunion"
+msgstr "Reunio"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafika karto: %s"
+msgid "Details"
+msgstr "Detaloj"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Resolutions"
-msgstr "Distingivoj"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardoj koloroj (32 bitoj)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "Kiun printsistemo vi deziras uzi?"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Printilo"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
+msgid "Mongolia"
+msgstr "Mongolio"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
+msgid "Mounted\n"
+msgstr "Muntita\n"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "膱u tiu 膲i konfigurado 臐ustas?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Grafika interfaco"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Eliras post %d sekundoj"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Resta怒ru de dosiero"
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "La pasvortoj ne egalas"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-"Eraro okazis:\n"
-"%s\n"
-"Provu 艥an臐i iujn parametrojn"
+"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
+"uzas.\n"
+"La pordmapservilo devas esti uzata 膲e komputiloj kiuj agas kiel serviloj\n"
+"por protokoloj kiuj uzas la RPC mekanismon."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detected hardware"
+msgstr "Vidu hardvaran informon"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de 膲i tiu grafika-karto eble svenigos vian komputilon"
+msgid "Mauritius"
+msgstr "Ma怒ricio"
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "膱u vi deziras provi la konfigura牡on?"
+msgid "Myanmar (Burmese)"
+msgstr "Mianmara (burma)"
-#: ../../Xconfig/test.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Provu konfigura牡on"
+msgid "Enabling swap partition %s"
+msgstr "Ebligas swap-subdiskon %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Kiun normon uzas via TV?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Ne ekzistas FAT-a subdiskoj por regrandecigi\n"
+"a怒 uzi kiel retrokonektaj subdiskoj (a怒 ne estas sufi膲a da spaco)spaco)"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "Armena (malnova)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Via grafika karto 艥ajnas havi TV-OUT-konektilon.\n"
-"臏i konfigureblas por funkcii uzante frame-buffer.\n"
-"\n"
-"Por tio vi devas konekti vian grafikan karton al via televidilo anta怒 ol "
-"startigi vian komputilon.\n"
-"Poste elektu la \"TVout\"-eniron en la startigilo\n"
-"\n"
-"膱u vi havas tiun konektilon?"
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke 臐i a怒tomate lan膲os X kiam 臐i\n"
-"ekfunkcias. 膱u vi deziras ke X a怒tomate lan膲os?"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "X Fenestro 膲e komenco"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 pelilo: %s\n"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 servilo: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s formatado de %s malsukcesis"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Dispartigado malsukcesis: %s"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Kanada (Kebeka)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "臏isdatigu"
+
+#: ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
+msgid "Workstation"
+msgstr "Laborstacio"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafika karto: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instalas paka牡o %s\n"
+"%d%%"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refre艥igrapido (vertical refresh rate): %s\n"
+msgid "Kyrgyzstan"
+msgstr "Kirgizistano"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Kun baza dokumenta牡o (rekomendita!)"
+
+#: ../../services.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, perioda ordonvicigilo."
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Vi devas havi radikan subdiskon.\n"
+"Por 膲i tiu, kreu subdiskon (a怒 klaku estantan).\n"
+"Sekve elektu la agon \"Surmetingo\" kaj faru 臐in '/'"
-#: ../../Xconfig/various.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
+msgid "Proxy should be http://..."
+msgstr "Prokura servilo devus esti http://..."
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
+msgid "South Africa"
+msgstr "Sud-Afriko"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aran臐o: %s\n"
+msgid "Western Sahara"
+msgstr "Okcidenta Saharo"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Surmetingo: "
+msgid "Choose a partition"
+msgstr "Elektu subdiskon"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Server: "
-msgstr "Servilo:"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "La URL devas komenci per http:// a怒 https://"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Bonvole entajpu la servilan URL de la WebDAV"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Surmetingo"
+msgid "Please test the mouse"
+msgstr "Bonvole, provu la muson"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Alia"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Malbona rezerva dosiero"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Server"
-msgstr "Servilo"
+msgid "Logitech MouseMan+"
+msgstr "Lo臐iteka MouseMan+"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount"
-msgstr "Muntu"
+msgid "Sector"
+msgstr "Sektoro"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Malmuntu"
+msgid "Qatar"
+msgstr "Kataro"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New"
-msgstr "Nova"
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"You can't select this package as there is not enough space left to install it"
msgstr ""
-"WebDAV estas protokolo kiu ebligas al vi kro膲i interretservilan dosierujon\n"
-"loke, kaj trakti 臐in kvaza怒 lokan dosiersistemon (kondi膲e ke la retservilo "
-"estu\n"
-"konfigurita kiel WebDAV-servilo). Se vi deziras aldoni WebDAF-kro膲punktojn,\n"
-"elektu \"New\"."
+"Vi ne povas elekti 膲i tiun paka牡on 膲ar ne estas sufi膲e da spaco por instali\n"
+"臐in."
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstata怒e"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Kreu a怒toinstalan disketon"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type"
-msgstr "Tipo"
+msgid "Dialing mode"
+msgstr "Diskuma modalo"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' anta怒e"
+msgid "File sharing"
+msgstr "Dosier-kundivido"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Delete"
-msgstr "Forigu"
+msgid "Clean /tmp at each boot"
+msgstr "Purigu /tmp dum 膲iuj startadoj"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create"
-msgstr "Kreu"
+msgid "Malawi"
+msgstr "Malavio"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
+msgid "Please choose your type of mouse."
+msgstr "Bonvole elektu la specon de via muso."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Malplena"
+msgid "class of hardware device"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows"
-msgstr "Vindozo"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "United Kingdom"
+msgstr "Unui臐inta Regno"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "running"
+msgstr "ruli臐ante"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Swap"
-msgstr "Inter艥an臐a"
+msgid "default"
+msgstr "defa怒lta"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Indonesia"
+msgstr "Indonezio"
-# this entry must not be too long, or the window gets tooooo wiiiiiide
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Franca"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Neniaj durdiskoj trovitaj"
+msgid "restrict"
+msgstr "limigu"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
+msgid "must have"
+msgstr "havenda"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Vi havas unu grandan MicroSoft-Vindozan subdiskon.\n"
-"Mi proponas ke vi unue regrandecigu tiun subdiskon\n"
-"(klaku sur 臐in, kaj poste klaku sur \"Regrandecigu\")"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Elektu agon"
+msgid "Senegal"
+msgstr "Senegalio"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Wizard"
-msgstr "Sor膲isto"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domajna nomo"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufi膲as)\n"
-"膲e la komenco de la disko"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno anta怒e"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Legu zorge"
+msgid "access to administrative files"
+msgstr "aliro al administraj dosieroj"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Encryption key (again)"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ", multi-function device on parallel port \\#%s"
msgstr ""
-"膱i tiu pasvorto ests tro simpla (臐i devas esti almena怒 %d signoj longa)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Speco: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "膲e kanalo %d identiga牡o %d\n"
+msgid "Montserrat"
+msgstr "Montserato"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
+msgid "Swap"
+msgstr "Inter艥an臐a"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Info: "
-msgstr "Informo: "
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Konektu al la Interreto"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Resta怒ru de dosiero"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
+msgid "TV card"
+msgstr "TV-karto"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read-only"
-msgstr "Nur-lege"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Vindozo 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Device: "
-msgstr "Aparato: "
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (umask)\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"Set the root umask."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Malinstalu printvicon"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"\n"
-"Povas esti, ke tiu 膲i subdisko estas\n"
-"pelila subdisko. Prefere\n"
-"lasu 臐in sola.\n"
+"Postfix estas Po艥tTransportPerilo, kiu estas la programo kiu movas\n"
+"retpo艥ton de unu komputilo al alia."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"膱i tie vi povas elekti la klavon a怒 klavkombinon kiu\n"
+"ebligos al vi 艥alti inter la diversaj klavaroj\n"
+"(ekz-e latinaj kaj ne-latinaj)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeco de pecoj %s\n"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Reta Konfigura牡o"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "Resta怒ru de disketo"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Subdisko startata defa怒lte\n"
-" (por MS-DOS starto, ne por \"lilo\")\n"
+"Nun kiam via Interreta konekto estas konfigurata,\n"
+"vi povas konfiguri vian komputilon por disdividi 臐ian Interretan konekton.\n"
+"Notu: vi bezonas dedi膲an Retadaptilon por konfiguri Lokan Reton (LAN).\n"
+"\n"
+"膱u vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
-"Retrokonekta(j) dosiero(j):\n"
-"...%s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
+"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Muntita\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Formatita\n"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "cilindro %d 臐is cilindro %d\n"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
+msgid "Latin American"
+msgstr "Latinamerika"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Konfiguru retumon"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Elektu dosieron"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nomo: "
+msgid "Info: "
+msgstr "Informo: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
+msgid "Button `%s': %s"
+msgstr "Butono '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "subdisko %s estas nun konata kiel %s"
+msgid "Please wait"
+msgstr "Bonvole atendu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Mi forigas %s"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Copying %s"
-msgstr "Kopianta %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Finata"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Mi movas dosierojn al la nova subdisko"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "膱u tio 膲i pravas?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Ethernet Card"
msgstr ""
-"Dosierujo %s entenas jam datenojn\n"
-"(%s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Ka艥u dosierojn"
+msgid "Info"
+msgstr "Informo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Movu dosierojn al la nova subdisko"
+msgid "Install"
+msgstr "Instalu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-"Post vi formatas la subdiskon %s, 膲iuj datenoj en 膲i tiu subdisko estos\n"
-"perdata"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti anta怒 ol la 艥an臐o povas efektivi臐i"
+msgid "Exit install"
+msgstr "Eliru instalprogramon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "La paka牡o %s estas bezonata. 膱u instali 臐in?"
+msgid "Remote CUPS server"
+msgstr "Malproksima CUPS-a servilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
+msgid "Sun - Mouse"
+msgstr "Sun - Muso"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: 膲i tiu operacio estas dan臐era."
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
+"\n"
+"%s\n"
+"\n"
+"膱u vi deziras konfiguri vian Lokan Reton (LAN) kun 膲i tiu adaptilo?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "chunk size"
-msgstr "grandeco de pecoj"
+msgid "Minimal install"
+msgstr "Minimuma instalado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "level"
-msgstr "nivelo"
+msgid "Ethiopia"
+msgstr "Etiopio"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "device"
-msgstr "aparato"
+msgid "Devanagari"
+msgstr "devanagara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Various"
-msgstr "Diversaj"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Kro膲-opcioj"
+msgid "Total size: %d / %d MB"
+msgstr "Tuta grandeco: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas. 膱u vi deziras uzi 臐in?"
+msgid "disabled"
+msgstr "malebligita"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Dosiero jam uzata de alia retrokonektado, elektu alian"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Loka printilo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Give a file name"
-msgstr "Donu dosiernomon"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Disabling servers..."
+msgstr "Detektas aparatojn..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Instalado de %s malsukcesis. La sekvanta eraro okazis:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Retrokonektado"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Vi ne povas uzi 膲i tiun subdiskon por retrokonektado"
+msgid "Network printer (TCP/Socket)"
+msgstr "Reta Printilo (TCP/ingo)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup User files..."
+msgstr "Malbona rezerva dosiero"
+
+#: ../../steps.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM-nomo?"
+msgid "Install system"
+msgstr "Instalu sistemon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "new"
-msgstr "nova"
+msgid "First DNS Server (optional)"
+msgstr "Unu DNS-a Servilo (nedeviga)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Elektu ekzistantan RAID por aldoni"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "Mi konfiguras..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Moving partition..."
-msgstr "Movas subdisko..."
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Moving"
-msgstr "Movante"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub Instalado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Al kiu sektoro vi deziras movi?"
+msgid "Israeli"
+msgstr "Israela"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Sector"
-msgstr "Sektoro"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "load setting"
+msgstr "Formatas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Al kiu disko vi deziras movi?"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Presilo \"%s\" en servilo \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Move"
-msgstr "Movu"
+msgid "Floppy can be removed now"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "New size in MB: "
-msgstr "Nova grandeco en MB: "
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Minimuma instalado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
+msgid "Denmark"
+msgstr "Danlando"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resize"
-msgstr "Regrandecigu"
+msgid "Moving partition..."
+msgstr "Movas subdisko..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, 膲iuj datenoj en 膲i tiu subdisko estos\n"
-"perdata"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP de SMB servilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "膱iuj datenoj en 膲i tiu subdisko devus esti rezervata"
+msgid "Test of the configuration"
+msgstr "Provu konfigura牡on"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "膱i tiu subdisko ne estas regrandecigebla"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Instalanta paka牡o %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kie vi deziras kro膲i aparaton %s?"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"Ne povas malfiksi surmetingon 膲ar 膲i tiu subdisko estas uzata por\n"
-"retrokonektado. Unue forigu la retrokonektadon."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kie vi deziras kro膲i retrokonektan dosieron %s?"
+msgid "Andorra"
+msgstr "Andoro"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "艤altas de ext2 al ext3"
+msgid "Sierra Leone"
+msgstr "Siera-Leono"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
+msgid "Botswana"
+msgstr "Bocvano"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "艤an臐u subdiskspecon"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Defa怒lta)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+msgid "Alternative test page (Letter)"
msgstr ""
-"Post vi 艥an臐as la specon de subdisko %s, 膲iuj datenoj en 膲i tiu subdisko "
-"estos\n"
-"perdata"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "膱u forigu la retrokonektan dosieron?"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"Vi ne povas krei novan subdiskon\n"
-"(膲ar vi atingis la maksimuman nombron da primaraj subdiskoj).\n"
-"Unue forigu primaran subdiskon kaj kreu etenditan subdiskon."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "Prefero: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
+msgid "Choose an X server"
+msgstr "Elektu X-servilon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
+msgid "Swap partition size in MB: "
+msgstr "Inter艥an臐a subdiska grandeco en MB: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "艤an臐u RAID (Redundanca Aro de Malmultekostaj Diskoj)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Malbona rezerva dosiero"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid "Formatted\n"
+msgstr "Formatita\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid "Type of install"
+msgstr "Instaltipo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Presilo \"%s\" sur SMB/vindoza servilo \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatu"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Detala informo"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
+"konektataj 膲e aliaj respondantaj komputiloj."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Post-instala konfigurado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"En艥ovu disketon en drajvo\n"
-"膱iuj datenoj sur tiu disketo estos perdata"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Warning"
-msgstr "Averto"
+msgid "Barbados"
+msgstr "Barbado"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Select file"
-msgstr "Elektu dosieron"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to backup..."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"膱u da怒ras tamen?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "A怒tomata kro膲ado de demeteblaj aparatoj"
+msgid "received"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Reload partition table"
-msgstr "Re艥argu subdiskotabelon"
+msgid "/File/_New"
+msgstr "/Dosiero/_Nova"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP de SMB servilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Restore partition table"
-msgstr "Resta怒ru subdiskotabelon"
+msgid "IP Range End:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Konservu la subdiskotabelon"
+msgid "High"
+msgstr "Alta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "NoVideo"
msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "膱iuj el la subdiskoj estas uzata"
+msgid "this field describes the device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informoj pri fiksdisko(j)"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Auto allocate"
-msgstr "A怒tomate disponigu"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printers"
+msgstr "Loka printilo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Clear all"
-msgstr "Forvi艥u 膲ion"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "LAN Konfigura牡o"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "膱u vi deziras konservi la modifojn en /etc/fstab?"
+msgid "NIS Server"
+msgstr "NIS Servilo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "膱u eliru sen skribi la subdisktabelon?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Pordo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "膱u eliru sen konservi"
+msgid "Spain"
+msgstr "Hispanujo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "膱u mi devus da怒ri malgra怒e?"
+msgid "This user name has already been added"
+msgstr "膱i tiu salutnomo estas jam aldonita"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "艤an臐u al Spertula re臐imo"
+msgid "Choose a file"
+msgstr "Elektu dosieron"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "艤an臐u al Normala re臐imo"
+msgid "Apply"
+msgstr "Apliku"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Undo"
-msgstr "Malfaru"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Malproksima printilo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Exit"
-msgstr "Eliro"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Elektu subdiskon"
+msgid "San Marino"
+msgstr "San-Marino"
-#: ../../diskdrake/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "Elektu alian subdiskon"
+msgid "Belgium"
+msgstr "Belgio"
-#: ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Change type"
-msgstr "艤an臐u specon"
+msgid "Kuwait"
+msgstr "Kuvajto"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Search servers"
-msgstr "Ser膲u servilojn"
+msgid "Choose the window manager to run:"
+msgstr "Elektu la fenestro-administrilon por lan膲i:"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain"
-msgstr "Domajno"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Username"
-msgstr "Uzulnomo"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "First Time Wizard"
+msgstr "Bonvenon al Unuafoja Sor膲ilo"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Bonvole tajpu vian uzulnomon, pasvorton kaj domajn-nomon por aliri al tiu "
-"gastiganto."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "A怒tentikigado de domajno postulata"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Another one"
-msgstr "Iu alia"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Which username"
-msgstr "Kiu salutnomo"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ne povas akcepti uzante uzulnomon %s (膲u mal臐usta pasvorto?)"
-
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-kontroliloj"
+"Eraro okazis, sed mi ne scias kiel trakti 臐in bone.\n"
+"Da怒ri je via propra risko."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-kontroliloj"
+msgid "please wait, parsing file: %s"
+msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-kontroliloj"
+msgid "Taiwan"
+msgstr "Tajvano"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-kontroliloj"
+msgid "Pakistan"
+msgstr "Pakistano"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-kontroliloj"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Joystick"
-msgstr "Ludbastono"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Versio: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Scanner"
-msgstr "skanilo"
+msgid "Provider name (ex provider.net)"
+msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Nekonata/Aliaj"
+msgid "Version: %s\n"
+msgstr "Versio: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Pont- kaj sistem-kontroliloj"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Via sistemo havas malmulte da risurcoj. Eble vi havos problemojn pri\n"
+"instali Linuks-Mandrejkon. Se tio okazos, vi povos anstata怒 provi tekstan\n"
+"instaladon. Por 膲i tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
+"tajpu `text'."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modemo"
+msgid "Use the Windows partition for loopback"
+msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet-karto"
+msgid "Armenian (typewriter)"
+msgstr "Armena (skribma艥ina)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processors"
-msgstr "Procesiloj"
+msgid "Connection type: "
+msgstr "Speco de konekto"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Sonkarto"
+msgid "Graphical interface"
+msgstr "Grafika interfaco"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Alia bildson-aparatoj"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s kun 3D aparata akcelado"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "Tvcard"
+msgid "India"
+msgstr "Hindio"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Videocard"
-msgstr "Videocard"
+msgid "Chad"
+msgstr "膱ado"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tape"
-msgstr "Bendo"
+msgid "Slovakia"
+msgstr "Slovakujo"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Singapore"
+msgstr "Singapuro"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "KD/DVD-skribiloj"
+msgid "Cambodia"
+msgstr "Kambo臐o"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "CDROM"
-msgstr "KDROMO"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Disk"
-msgstr "Disko"
+msgid "Path"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disketo"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Lasu min kapti ajnan pelilon"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Presilo %s\n"
+"Kion vi deziras modifi pri tiu presilo?"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "Pelilo:"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Aldonu uzanto"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8016,140 +8062,98 @@ msgstr ""
"\n"
"La nuna pelilo por via \"%s\"-sonkarto estas \"%s\"."
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"膱u vi 艥atus permesi al uzuloj kundividi iujn el siaj dosierujoj?\n"
+"Permesi tion ebligos al uzuloj simple klaki sur \"Share\" respektive "
+"\"Kundividu\"\n"
+"en Konkeranto kaj nautilus.\n"
+"\n"
+"\"Custum\" ebligas per-uzulan.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
+"Bonvole elektu 艥argu a怒 konservu paka牡-elekton sur disketo.\n"
+"La formato estas la sama kiel disketoj generitaj per auto_install."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Eraro: La \"%s\"-pelilo por via sonkarto ne estas listigita"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unkown driver"
-msgstr "Nekonata pelilo"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use quota for backup files."
+msgstr "Malbona rezerva dosiero"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Ne ekzistas konata pelilo por via sonkarto (%s)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Mi konfiguras printilon \"%s\"..."
-#: ../../harddrake/sound.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Nenia konata pelilo"
+msgid "Internet connection"
+msgstr "Interreta konekto"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Ne ekzistas libera pelilo por via sonkarto (%s), sed ekzistas proprieta "
-"pelilo 膲e \"%s\"."
+"艤argado de modulo %s malsukcesis.\n"
+"膱u vi deziras trovi denove kun aliaj parametroj?"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No open source driver"
-msgstr "Nenia liberfonta pelilo"
+msgid "Welcome to the Open Source world."
+msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Bonvole atendu... Mi aplikas la konfigura牡on"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnio-Hercegovino"
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Trouble shooting"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
+"Vi bezonas veran dosiersistemon (ext2, reiserfs, xfs a怒 jfs) por tiu "
+"surmetingo\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System - Libera Sonsistemo) estis la nuna son-API. 臏i estas "
-"son-API "
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Bonvole, provu la muson"
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Via karto nun uzas la %s\"%s\"-pelilon (defa怒lta plelilo por via karto estas "
-"\"%s\")"
+msgid "Netherlands"
+msgstr "Nederlando"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Konservu en dosiero"
-#: ../../harddrake/sound.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Son-konfigurado"
+msgid "Internal ISDN card"
+msgstr "Interna ISDN-karto"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8158,1619 +8162,1550 @@ msgid ""
"currently uses \"%s\""
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "enable radio support"
-msgstr ""
+msgid "Title"
+msgstr "Titolo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Radio support:"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL-konfigura牡o:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "WARNING"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Installing bootloader"
+msgstr "Instalas start-艥argilon"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "艤an臐u subdiskspecon"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Card model:"
-msgstr "Model de la karto:"
+msgid "replay"
+msgstr "Reludu"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "detected %s"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Nekonata|Genera"
+msgid "Virgin Islands (U.S.)"
+msgstr "Insuloj Virgaj (Usonaj)"
-#: ../../harddrake/v4l.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "Bad backup file"
+msgstr "Malbona rezerva dosiero"
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
+"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Auto-detect"
-msgstr "Memdetekta"
-
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Do"
-msgstr "Faru"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elekta牡o? (defa怒lo estas %s) "
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Malbona elekta牡o, provu denove\n"
-
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+msgid "Pipe into command"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
+"funkcii.\n"
+"Vi povas trovi iun informon pri ili 膲e: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Via elekto? (defa怒lto '%s'%s) "
+msgid "Detecting devices..."
+msgstr "Detektas aparatojn..."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "膱u vi deziras alklaki tiun butonon?"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Butono '%s': %s"
-
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Via elekto? (0/1, defa怒lo '%s') "
+msgid "Haiti"
+msgstr "Haitio"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "the name of the CPU"
msgstr ""
-"艤argado de modulo %s malsukcesis.\n"
-"膱u vi deziras trovi denove kun aliaj parametroj?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "Specifu opciojn"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Autoprobe"
-msgstr "A怒tomate esploru"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "Legas datumbason de CUPS peliloj..."
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+msgid "You must also format %s"
msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por 臐uste funkcii,\n"
-"kvankam 臐i normale funkcias bone sen la informo. 膱u vi deziras specifi\n"
-"aldonajn opciojn por 臐i a怒 permesi al la pelilo esplori vian komputilon\n"
-"por la informo 臐i bezonas? Kelkfoje, esplori svenas komputilon, sed\n"
-"臐i ne devus ka怒zi difekton."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Zorgu: 膲i tiu operacio estas dan臐era."
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
+msgid "Insert a floppy containing package selection"
+msgstr "En艥ovu disketon kun paka牡-selekto en drajvo"
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi 臐iajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
+msgid "Server: "
+msgstr "Servilo:"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "Elektas sekurnivelon"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
+msgid "Sweden"
+msgstr "Svedio"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
+msgid "Poland"
+msgstr "Pollando"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "膱u vi havas iun %s interfacon?"
+msgid "Importance: %s\n"
+msgstr "Graveco: %s\n"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "膱u vi havas alian?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovis %s %s interfacojn"
+msgid "Other ports"
+msgstr "Aliaj pordoj"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "eroj disigitaj per komo"
+msgid "SMBus controllers"
+msgstr "SMBus-kontroliloj"
-#: ../../modules/parameters.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "Speco de konekto"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "comma separated numbers"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr ""
+msgid "Croatian"
+msgstr "Kroata"
-#: ../../modules/parameters.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Uzu ekzistantajn subdiskojn"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
+msgid "Unable to contact mirror %s"
+msgstr "Ne povis kontakti spegulon %s"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "a number"
-msgstr "numero"
+msgid "/Help/_About..."
+msgstr "/Helpo/_Pri..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Remove user directories before restore."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"La plej ofte uzata maniero por konekti per ADSL estas pppoe.\n"
-"Kelkaj konektoj uzas pptp, malmultaj uzas dhcp.\n"
-"Se vi ne scias, elektu 'uzu pppoe'"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Interreta Konfigurado"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "could not find any font in your mounted partitions"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid "F00f bug"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "uzu dhcp"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "use pptp"
-msgstr "uzu pptp"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Kiun dhcp-an klienton vi deziras uzi?\n"
+"La defa怒lto estas dhcp-client"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "uzu pppoe"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domajna nomo"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Other ports"
-msgstr "Aliaj pordoj"
+msgid "On Floppy"
+msgstr "Sur disketo"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "Resta怒ru de dosiero"
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
+msgid "Looking for available packages..."
+msgstr "Ser膲as haveblajn paka牡ojn"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Init Message"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
+msgid "Rescue partition table"
+msgstr "Sava subdiskotabelo"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Speco de konekto"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "neniu retkarto"
+msgid "Cyprus"
+msgstr "Kipro"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Serviloj POP kaj IMAP"
+msgid "Remove from RAID"
+msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "Retpo艥t-servilo"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"膱i tiu pasvorto ests tro simpla (臐i devas esti almena怒 %d signoj longa)"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domajn-nom-servilo"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "ISDN-a Konfigura牡on"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Interret-servilo"
+msgid "ISDN connection"
+msgstr "ISDN-konekto"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "primary"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Host name"
-msgstr "Po艥tejo"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Po艥tejo"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Tiu 膲i dialogo uzeblas por elekti kiujn servojn vi deziras startigi kiam vi "
+"startigas\n"
+"vian komputilon.\n"
+"DrakX listigos 膲iujn servojn atingeblajn en la nuna instala牡o.\n"
+"Kontrolu 膲iujn zorge kaj malelektu tiujn kiuj ne estas 膲iam bezonataj\n"
+"dum la starto.\n"
+"Kiam via muso estas supre de ero, malgranda balono\n"
+"ekaperas por helpi vin. 臏i priskribas la rolon de la servo.\n"
+"Tamen, se vi ne certas 膲u iu servo utilas a怒 ne, prefere lasu la defa怒ltan "
+"sintenon.\n"
+"\n"
+"!!Zorgegu en 膲i tiu pa艥o se vi intencas uzi vian komputilon kiel servilo:\n"
+"ne startu servojn kiujn vi ne bezonas. Memoru ke certaj servoj povas esti\n"
+"dan臐eraj se ili estas aktivigitaj en servilo. 臏enerale,\n"
+"elektu nur tiujn servojn kiujn vi vere bezonas.\n"
+"!!"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Konfiguras reto"
+msgid "Skip"
+msgstr "Ellasu"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "Niue"
msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
-#, c-format
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.\n"
-"Mi ne povas konfiguri tiun konektotipon."
+"艤altas/Mal艥altas 膲iujn retajn interfacojn konfiguratajn por lan膲i\n"
+"dum sistemstartado."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Kiun dhcp-an klienton vi deziras uzi?\n"
-"La defa怒lto estas dhcp-client"
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Neniu ISDN-a PCI-a karto trovata. Bonvole elektu unu el la PCI-aj kartojn "
-"sur\n"
-"la sekvanta ekrano."
+msgid "important"
+msgstr "grava(j)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "Total Progress"
msgstr ""
-"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon. Bonvole "
-"elektu\n"
-"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kiu el la sekvaj estas via ISDN-karto?"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN-a Konfigura牡on"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "膱esigu"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "膱u mi devus da怒ri?"
-
-#: ../../network/isdn.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakX unue detektos iujn IDE-aparatojn en via komputilo. 臏i anka怒\n"
+"ser膲as unu a怒 plurajn PCI-SCSI-kartojn en via sistemo. Se SCSI-karto\n"
+"estas trovita, DrakX a怒tomate instalos la ta怒gan pelilon.\n"
"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"臐usta.\n"
+"膱ar detektado de aparataro ne estas absolute senerara, DrakX povas\n"
+"malsukcesi detektante viajn fiksdiskojn. Se tiel, vi devos mem mane entajpi\n"
+"vian aparataron.\n"
"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
+"Se vi devis mane entajpi vian PCI-SCSI-adaptilon, DrakX demandos 膲u vi\n"
+"deziras konfiguri opciojn por 臐i. Prefere permesu al DrakX provi la "
+"aparatojn\n"
+"por la kartospecifaj opcioj kiuj estas bezonataj por inici la adaptilon. "
+"Plej ofte,\n"
+"DrakX trairos tiun pa艥on sen ajna problemo.\n"
+"\n"
+"Se DrakX ne kapablas provi kiujn parametrojn la opcioj a怒tomate devas doni "
+"al la\n"
+"aparatoj, vi devos mane konfiguri la pelilon."
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Mi ne scias"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Users"
+msgstr "Salutnomo"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Arubo"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Preparas start艥argilon"
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
+msgid "Gateway (e.g. %s)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "The passwords do not match"
+msgstr "La pasvortoj ne egalas"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Kiun protokolon vi deziras uzi?"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokolo por la cetera mondo"
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Protokolo por la cetera mondo \n"
-"Neniom da D-Kanelo (lukontraktataj lineoj)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "European protocol"
-msgstr "E怒ropa protokolo"
+msgid "the number of the processor"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "E怒ropa protokolo (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "Aparata horlo臐o estas 臐ustigita la怒 GMT"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se 臐in ne estas en la listo, elektu Nelisti臐itan"
+msgid "Give a file name"
+msgstr "Donu dosiernomon"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+
+#: ../../standalone/livedrake:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Eksterna ISDN-modemo"
+msgid "Change Cd-Rom"
+msgstr "艤an臐u KD-ROM-on"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
+msgid "Paraguay"
+msgstr "Paragvajo"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Kia estas via ISDN-a konekta牡o?"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Sor膲ilo por ret-konfigurado"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Ne ekzistas konata pelilo por via sonkarto (%s)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Malnova konfigra牡o (isdn4net)"
+msgid "force"
+msgstr "devigu"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfigura牡o (isdn-light)"
+msgid "Exit"
+msgstr "Eliro"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Do nothing"
-msgstr "Faru nenion"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Install rpm"
-msgstr "Instalu rpm"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Title"
-msgstr "Titolo"
+msgid "Estonian"
+msgstr "Estona"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
+"Apache estas Tut-Tera Teksa牡a servilo. 臏i liveras HTML-ajn dosierojn\n"
+"kaj CGI (komunakluza interfaco)."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
+msgid "Add/Del Clients"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Domain name"
-msgstr "Domajna nomo"
+msgid "Choose the network interface"
+msgstr "Elektu la retan interfacon"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "CHAP"
+msgid "Unknown Model"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
+msgid "CD/DVD burners"
+msgstr "KD/DVD-skribiloj"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP (Pasvorta A怒tentikigada Protokolo)"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Subdisko startata defa怒lte\n"
+" (por MS-DOS starto, ne por \"lilo\")\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Salutnomo"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Elektu agon"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefonnumero"
+msgid "Firewalling configuration detected!"
+msgstr "Konfigura牡o de barilo detektata!"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Nomo de konekto"
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Telefon-konektaj opcioj"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Reta Konfigura牡o"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
+msgid "Updating package selection"
+msgstr "臏isdatigo de paka牡-elekto"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Kie vi deziras kro膲i retrokonektan dosieron %s?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problemo okazis dum restarto de la reto: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"La reto devas esti restartigita.\n"
-"膱u vi deziras restartigi 臐in?"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Reta Konfigura牡o"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "膱u vi deziras starti vian konekta牡on je startado de la sistemo?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Interreta konekto"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "2 butonoj"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la konekton kiun vi deziras konfiguri"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "LAN connection"
-msgstr "LAN Konfigura牡o"
-
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "kabla konekta牡on detektita"
+msgid "Replay"
+msgstr "Reludu"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Cable connection"
-msgstr "Kabla konekto"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "Malbona rezerva dosiero"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "detected"
-msgstr "detektita"
+msgid "No floppy drive available"
+msgstr "Neniu disketilo havebla"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL-konekto"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "detected %s"
+msgid "TV norm:"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-konekto"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem-konekto"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detektita en pordo %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litova AZERTY-a (nova)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Normala modemo-konekto"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
+"Neniu start艥argilo povas trakti tion sen /boot subdisko.\n"
+"Bonvole zorgu aldoni /boot subdiskon."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "Expert Mode"
-msgstr "Spertulore臐imo"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Previous"
+msgstr "<- Anta怒a"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr ""
+msgid "Other OS (MacOS...)"
+msgstr "Alia Mastruma Sistemo (MacOS...)"
-#: ../../network/netconnect.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Elektu la konfigurendan profilon"
+msgid "To activate the mouse,"
+msgstr "Por aktivigi la muson,"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
+msgid "Bringing up the network"
+msgstr "Startado de la reto"
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
+msgid "Screenshots will be available after install in %s"
+msgstr "Ekranfotoj haveblos post instalado en %s"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
-"Press OK to continue."
-msgstr ""
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
-"Ni konfiguros nun l %s konekton.\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
-"Premu JES por da怒rigi."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ni konfiguros nun la %s-konekton."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Interreta konekta牡o kaj konfiguro"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Konfiguru la konekton"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Malkonektu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Konektu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
"\n"
-"You can reconfigure your connection."
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-"\n"
-"Vi povas rekonfiguri vian konekton."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
msgstr ""
-"\n"
-"Vi povas konekti al interreto a怒 rekonfiguri vian konekton."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Vi estas nun ne konektita kun interreto."
+msgid "Computing FAT filesystem bounds"
+msgstr "Kalkulas FAT dosiersistemajn limojn"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Vi estas nun konektita al Interreto."
-
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL devas komenci per 'ftp:' a怒 'http:'"
+msgid "Content of the file"
+msgstr "Enhavoj de la dosiero"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
+msgid "Authentication LDAP"
+msgstr "A怒tentikiga LDAP"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
+msgid "Let me pick any driver"
+msgstr "Lasu min kapti ajnan pelilon"
-#: ../../network/network.pm:1
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "muntado malsukcesis: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
+msgid "transmitted"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS-servila adreso devas esti en formato 1.2.3.4"
+msgid "Palestine"
+msgstr "Palestino"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
+msgid "RAID md%s\n"
+msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "%d comma separated strings"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "DNA servilo"
+msgid "Here is the full list of keyboards available"
+msgstr "Jen la kompleta listo de haveblaj klavaroj"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "Opuza nomo"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Bonvole enigu vian po艥tejon.\n"
-"Via po艥tejo devus esti plene specifita po艥tejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi anka怒 povas enigi la IP-adreson de la prokura kluzo se via havas unu."
+msgid "/_Help"
+msgstr "/_Helpo"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "the width of the progress bar"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
+msgid "Cook Islands"
+msgstr "Kuk-Insularo"
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "Startu 膲e starto"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Bonvole, provu la muson"
+msgid "Formatting partition %s"
+msgstr "Formatas subdiskon %s"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Reta Konfigura牡o"
+msgid "Hostname required"
+msgstr "Po艥tejo: "
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Cancel"
+msgstr "Nuligu"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Po艥tejo"
+msgid "Searching for configured scanners ..."
+msgstr "Loka printilo"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Retmasko"
+msgid "Wheel"
+msgstr "Rado"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP-adreso"
+msgid "Videocard"
+msgstr "Videocard"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "Automatic IP"
-msgstr "A怒tomata IP"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "Malinstalu printvicon"
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr " (pelilo: %s)"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Malproksima printilo"
-#: ../../network/network.pm:1
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguras retan aparaton %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Malproksima printilo"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-"Bonvole enigu la IP-an konfigur芒jon por 膲i tiu komputilo.\n"
-"膱iu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
+"AVERTO!\n"
+"\n"
+"DrakX nun regrandecigos vian Vindozan subdiskon. Zorgu:\n"
+"膲i tiu operacio estas dan臐era. Se vi ne jam faris 臐in,\n"
+"vi prefere anta怒e eliru el la instalado, uzu\n"
+"\"scandisk\" sub Vindozo (kaj la怒vole rulu \"defrag\"), kaj sekve relan膲u "
+"la\n"
+"instaladon. Vi prefere faru anka怒 rezervan kopion de via datenoj.\n"
+"Kiam vi estos certa, klaku \"Jeso\"."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-"AVERTO: 膱i tiu aparato estis anta怒e konfigurita por konekti al la "
-"Interreto.\n"
-"Simple akceptu konservi la konfiguron de 膲i tiu aparato.\n"
-"Se vi modifos la subajn kampojn, vi 艥an臐os 膲i tiun konfiguron."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Averto. Ekzistanta konfigura牡o de barilo detektata. Vi eble devas permane\n"
-"fiksi 臐in poste de la instalado."
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Konfigura牡o de barilo detektata!"
+msgid "Other"
+msgstr "Alia"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Konta Pasvorto"
+msgid "Default"
+msgstr "Defa怒lta"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
+msgid "Button 2 Emulation"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "type1inst building"
+msgstr ""
+
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
+msgid "Abiword"
+msgstr "膱esigu"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Elektu agon"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Rapido de konekto"
+msgid "X server"
+msgstr "X servilo"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
+msgid "Domain Admin User Name"
+msgstr "Uzulnomo de la Domajna administranto"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "Estis eraro dum instalado de paka牡oj:"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Elektu vian landon"
+msgid "US keyboard (international)"
+msgstr "Usona klavaro (internacia)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "Eliru instalprogramon"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
+msgid "LAN connection"
+msgstr "LAN Konfigura牡o"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
+msgid "/File/-"
+msgstr "/Dosiero/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
+msgid "Italian"
+msgstr "Itala"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
+msgid "Basic"
+msgstr "Baza"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
+msgid "Honduras"
+msgstr "Honduro"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "I/O (Eneligo) de Karto"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu a怒 marku la suban kampon"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "La sistemo estas nun konektita al Interreto."
+msgid "\t-Network by FTP.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Testante vian konekta牡on..."
+msgid "Russian (Yawerty)"
+msgstr "Rusa (Yawerty-a)"
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "膱u vi deziras provi konekti al la interreto nun?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "Printila Aparato URI"
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "Interreta konfigurado"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Quit"
+msgstr "膱esu"
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"Io malbona okazas en via drajvo.\n"
-"Testo pri la integreco de datenoj malsukcesis.\n"
-"Tio signifas ke skribado al la disko fini臐os per difektitaj datenoj."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Defa怒lta)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Graifka memoro: %s KB\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "膱e CUPS-servilo \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Tiu 膲i programo estas libera softvaro; vi povas redisdoni 臐in kaj/a怒 modifi\n"
+"臐in sub la termoj de la GNU-臏eneralpublika Licenco kiel publikigita de\n"
+"la Libera Programar Fonda牡o (Free Software Foundation); a怒 versio 2, a怒\n"
+"la怒 via opcio) pli posta versio.\n"
+"\n"
+"Tiu 膲i programo estas disdonata kun la espero ke 臐i estu utila,\n"
+"sed SEN IA GARANTIO; e膲 sen garantio pri MERKATOTAUXGECO a怒\n"
+"TAUXGECO POR APARTA CELO. Vidu la\n"
+"GNU 臏eneralpublikan Licencon pri pli da detaloj.\n"
+"\n"
+"Vi devus esti ricevinta kopion de la GNU 臏eneralpublika Licenco\n"
+"kun tiu 膲i programo; se ne, skribu al la Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Malproksimaj printiloj"
+msgid "access to compilation tools"
+msgstr "aliro al kompililoj"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
-#, c-format
-msgid "CUPS"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to restore..."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "(on this machine)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
+"sufi膲as)\n"
+"膲e la komenco de la disko"
-#: ../../printer/cups.pm:1
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Standard test page"
+msgstr "La怒norma"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "Create"
+msgstr "Kreu"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
+msgid "What"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "There was an error ordering packages:"
+msgstr "Estis eraro ordigi paka牡ojn:"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD"
-msgstr ""
+msgid "Bulgarian (BDS)"
+msgstr "Bulgara (BDS)"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "Datumbazoj"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "PDQ"
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "Speco de dosiersistemo: "
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Gujarati"
+msgstr "gujarata"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unknown Model"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Unknown model"
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Instalu sistemon"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Pordo%s)"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "Laborgrupo"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Gastiganto %s"
+msgid "Brazil"
+msgstr "Brazilo"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Network %s"
-msgstr "Reto %s"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install"
+msgstr "Instalu"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfaco \"%s\""
+msgid "Network Configuration Wizard"
+msgstr "Sor膲ilo por ret-konfigurado"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Loka(j) reto(j)"
+msgid "Removable media automounting"
+msgstr "A怒tomata kro膲ado de demeteblaj aparatoj"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "Printing"
+msgstr "Presante"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "Unkown driver"
+msgstr "Nekonata pelilo"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
+msgid "Create a new partition"
+msgstr "Kreu novan subdiskon"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Driver:"
+msgstr "Pelilo:"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "unknown"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", presante sur %s"
+msgid "Use fdisk"
+msgstr "Uzu fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "MOVU VIAN RADON!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid "sent: "
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
+msgid "Automatic IP"
+msgstr "A怒tomata IP"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB-printilo"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid "Configuration of a remote printer"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr ""
+msgid "Moldova"
+msgstr "Moldovio"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Loka printilo"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Pipe job into a command"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
+#: ../../network/network.pm:1
+#, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL devas komenci per 'ftp:' a怒 'http:'"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
+msgid "Add a new rule at the end"
+msgstr "Neniu printilo"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Reta Printilo (TCP/ingo)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Nun vi povas provizi 臐iajn opciojn al modulo %s.\n"
+"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
+"Ekzemple, ``io=0x300 irq=7''"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servilo"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "膱u eliru sen skribi la subdisktabelon?"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Malproksima printilo"
+msgid "Installing packages..."
+msgstr "Instalanta paka牡ojn..."
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Loka printilo"
+msgid "Dutch"
+msgstr "Nederlanda"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Konfiguru Printilon"
+msgid "The following packages need to be installed:\n"
+msgstr "La sekvaj paka牡oj estos instalataj"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr "Angolo"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Printilo"
+msgid "service setting"
+msgstr "Servilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Foriganta presilon \"%s\"..."
+msgid "Custom"
+msgstr "Akomodata"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "膱u vi vere deziras forigi la presilon \"%s\"?"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Dosiero jam uzata de alia retrokonektado, elektu alian"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Malproksima printilo"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read-only"
+msgstr "Nur-lege"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "膱u vi deziras provi la konfigura牡on?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Latvio"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Printas provpa臐o(j)n..."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Nenia konata pelilo"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Local Area Network..."
+msgstr "Konfiguru lokan reton"
+
+#: ../../services.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "Lan膲u la sonsistemon en via ma艥ino"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Preparing printer database..."
+msgstr "Legas datumbason de CUPS peliloj..."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Montru informon"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "No network card"
+msgstr "neniu retkarto"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "Kiun dosierosistemo vi deziras uzi?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "3 buttons"
+msgstr "3 butonoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Detailed information"
+msgstr "Detala informo"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Malta"
+msgstr "Malto"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid "This floppy is not FAT formatted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Printilaj opcioj"
+msgid "Configuring network"
+msgstr "Konfiguras reto"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
+msgid "Graphic Card"
+msgstr "Grafik-karto"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Resizing Windows partition"
+msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Foriganta la malnovan presilon \"%s\"..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
+msgid "Provider dns 1 (optional)"
+msgstr "Provizanto DNS 1 (nedeviga)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Neniu printilo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr "Kameruno"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"Nun vi povas dispartigi %s.\n"
+"Kiam vi fini臐os, ne forgesu savi kun `w'."
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9779,416 +9714,336 @@ msgstr ""
msgid "Close"
msgstr "Malfermu"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Presilo %s\n"
-"Kion vi deziras modifi pri tiu presilo?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Neniu printilo"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Konfiguru retumon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "LAN Konfigura牡o"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Calendar"
+msgstr "Kalendaro"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli a怒 艥an臐i la ekzistantajn."
+"Por uzi malproksima lpd printvico, vi devas provizi la po艥tejon de la\n"
+"printservilo kaj la printviconomon 膲e tiu servilo en kiun taskoj devus\n"
+"esti metata."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing system: "
-msgstr ""
+msgid "Iceland"
+msgstr "Islando"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalanta Foomatic..."
+msgid "stopped"
+msgstr "haltigita"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Malsukcesis konfiguri la printilon \"%s\"!"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+# this entry must not be too long, or the window gets tooooo wiiiiiide
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Mi konfiguras printilon \"%s\"..."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer data..."
-msgstr "Legas datumbason de CUPS peliloj..."
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Etendu Arbon"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Expert Mode"
+msgstr "Spertulore臐imo"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Loka printilo"
+#, c-format
+msgid "Printer options"
+msgstr "Printilaj opcioj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Instalanta paka牡o %s"
+msgid "Local Network adress"
+msgstr "neniu retkarto trovita"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Distingivo: %s\n"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Malbona rezerva dosiero"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
+"Vi havas nun la eblecon de艥uti 臐isdatigitajn paka牡ojn. Tiuj paka牡oj\n"
+"estas 臐isdatigitaj post eldonado de tiu 膲i eldono. Ili povas\n"
+"enteni sekureco- a怒 eraro-riparojn.\n"
+"\n"
+"Por de艥uti tiujn paka牡ojn, vi bezonas funkciantan Interret-\n"
+"konekton.\n"
+"\n"
+"膱u vi deziras instali tiujn 臐isdatigojn?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
+msgid "Samba Server"
+msgstr "NIS Servilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "Alta"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuration of a remote printer"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr " <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
+msgid "Zimbabwe"
+msgstr "Zimbabvo"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Startas vian konekta牡on..."
+msgid "Please enter the host name or IP."
+msgstr "Bonvole, provu la muson"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Legas datumbason de CUPS peliloj..."
+msgid "When"
+msgstr "Rado"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
+msgid "Second DNS Server (optional)"
+msgstr "Du DNS-a Servilo (nedeviga)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Neniu printilo"
+msgid "Finland"
+msgstr "Finnlando"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "Kolorprofuneco: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transfer"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Vi ne povas malelekti 膲i tiun paka牡on. 臏i devus esti promociata."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Loading from floppy"
+msgstr "艤argas de disketo"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
+msgid "Slovenia"
+msgstr "Slovenujo"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"Enter a user\n"
+"%s"
msgstr ""
+"Enigu uzanton\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Printilan Konekton"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Jen la diversaj enskriboj.\n"
+"Vi povas aldoni pli a怒 艥an臐i la ekzistantajn."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"Lan膲as ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
+"'at' estis uzata, kaj lan膲as ba膲ajn ordonojn kiam la 艥argmezo estas\n"
+"sufi膲e malgranda."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Printas provpa臐o(j)n..."
+msgid "Installing SANE packages..."
+msgstr "Instalanta paka牡ojn SANE..."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Printilaj opcioj"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "Startdiskokreado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Presanta per presilo \"%s\""
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Haltas de la reto"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Presanta/skananta per \"%s\""
+msgid "Change type"
+msgstr "艤an臐u specon"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Presanta/skananta foton karton per \"%s\""
+msgid "SILO Installation"
+msgstr "SILO Instalado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "Paranoja"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10199,244 +10054,212 @@ msgid ""
"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Distingivo"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"Por printi al SMB-a printilo, vi devas provizi la SMB po艥tejon (Notu! 臏i "
+"eble\n"
+"estas malsama de 臐ia TCP/IP nomo!) kaj eble la IP-adreson de la "
+"printservilo,\n"
+"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
+"ta怒gan salutnomon, pasvorton, kaj laborgrupan informon."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
+msgid "reconfigure"
+msgstr "rekonfiguru"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
+"NOTU KE 膱I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "Printservilo"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "aliro al retiloj"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Here is a list of all auto-detected printers. "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Provpa臐o(j)n estis sendataj al la printila demono.\n"
-"膱i tiu eble postulas iom da tempo anta怒 ol la printilo komencas.\n"
-"膱u 臐i 臐uste funkcias?"
+"Eraro da怒re mi instalis \"aboot\",\n"
+"膱u mi devus provi perforte instali e膲 se tio detruas la unuan subdiskon?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"Provpa臐o(j)n estis sendataj al la printila demono.\n"
-"膱i tiu eble postulas iom da tempo anta怒 ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"膱u 臐i 臐uste funkcias?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Printas provpa臐o(j)n..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Printas provpa臐o(j)n..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Printas provpa臐o(j)n..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "La怒norma"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print"
-msgstr "Printilo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "No test pages"
-msgstr "Jes, printu amba怒 de la provpa臐ojn"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "Malinstalu printvicon"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Provu pordojn"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Bonvole plenigu a怒 marku la suban kampon"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"膱u vi deziras konfiguri tiun 膲i presilon (\"%s\")\n"
-"kiel defa怒ltan presilon?"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "膱u vi deziras konservi la modifojn en /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Option %s out of range!"
+msgid "Boot Protocol"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "LVM-disks %s\n"
+msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "La paka牡o %s estas bezonata. 膱u instali 臐in?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "Startante"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Printilan Konekton"
+msgid "Bus identification"
+msgstr "A怒tentikigado"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
+msgid "Please make a backup of your data first"
+msgstr "Bonvolu fari rezervan kopion de via dateno anta怒e"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "Vatican"
+msgstr "Vatikano"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
+msgid "Eritrea"
+msgstr "Eritreo"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
+msgid "Remove List"
+msgstr "Malproksima printilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Inuktitut"
+msgstr "inuita"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
@@ -10445,1352 +10268,1166 @@ msgstr "Kiun specon de printilo vi havas?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Legas datumbason de CUPS peliloj..."
+msgid "Add a new printer"
+msgstr "Neniu printilo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Malproksima printilo"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "膱u tio 膲i pravas?"
+msgid "<-- Delete"
+msgstr "Forigu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Nepal"
+msgstr "Nepalo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Malproksima printilo"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Legas datumbason de CUPS peliloj..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "grandeco de pecoj"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Location"
-msgstr "Loko"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Description"
-msgstr "Priskribo"
+msgid "Problems installing package %s"
+msgstr "Problemoj instalante paka牡on %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer"
-msgstr "Nomo de printilo"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Reload partition table"
+msgstr "Re艥argu subdiskotabelon"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalanta paka牡ojn mtools..."
+msgid "Boot"
+msgstr "Starto"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalanta paka牡ojn SANE..."
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Tuner type:"
+msgstr "艤an臐u subdiskspecon"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Nun estas tempo por elekti pressistemon por via komputilo. Aliaj mastrum-"
+"sistemoj\n"
+"proponas al vi unu, sed Linuks-Mandrako proponas du. 膱iu el la pressistemoj\n"
+"plej ta怒gas por aparta tipo de konfigurado.\n"
+"\n"
+" * \"pdq\" -- kio estas akronimo por \"print, don't queue\" (presu, ne "
+"vicigu), elektindas\n"
+"se vi havas rektan konekton kun via presilo, vi 艥atus eskapi el problemoj "
+"kun\n"
+"aliaj presiloj, kaj vi ne havas retajn presilojn. (\"pdq\"\n"
+"pritraktos nur tre simplajn retokazojn kaj estas iom malrapida se\n"
+"uzata kun retoj.) Konsilindas uzi \"pdq\" se tio 膲i estas via\n"
+"unua sperto kun GNU/Linukso.\n"
+"\n"
+" * \"%s\" - \"Common Unix Printing System\", estas bonega elekto por\n"
+"presigi vian lokan presilon a怒 iun ie tra la planedo. 臏i estas\n"
+"facile konfigurebla kaj povas agi kiel servilo a怒 kiel kliento por la "
+"anta怒a\n"
+"\"lpd \" pressistemo, kaj estas kongrua kun pli malnovaj mastrum-sistemoj\n"
+"kiuj eble ankora怒 bezonas presservojn. Kvankam tre potenca, la baza "
+"konfigurado\n"
+"estas preska怒 same simpla kiel \"pdq\". Se vi bezonas imiti \"lpd\"-"
+"servilon,\n"
+"certi臐u ke vi aktivigis la \"cups-lpd\"-demonon. \"%s\" enhavas grafikajn\n"
+"'front-ends' por presi a怒 por elekti presil-opciojn kaj por mastrumi\n"
+"la presilon.\n"
+"\n"
+"Se vi faras vian elekton nun, kaj poste trovas ke vi ne 艥atas vian "
+"pressistemon,\n"
+"vi povas 艥an臐i 臐in rulante PrinterDrake ekde la Mandraka KontrolCentro kaj\n"
+"alklaki la eksperto-butonon."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instalanta paka牡on HPOJ..."
+msgid "\"Menu\" key"
+msgstr "\"Menuo\"-klavo"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Administrator:"
+msgstr "Malproksimaj lpd Printilaj Opcioj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domajna nomo"
+msgid "Please enter your login"
+msgstr "Bonvole provu denove"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Pipe into command"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Mi detektis modelon: %s %s"
+msgid "Fonts copy"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "Automated"
+msgstr "A怒tomata"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
+msgid "Do you want to test the configuration?"
+msgstr "膱u vi deziras provi la konfigura牡on?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Port"
-msgstr "Pordo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Printilaj Po艥tejo"
+msgid ""
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "Konservu la paka牡-elekton"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Printilaj Po艥tejo"
+msgid "Remove the last item"
+msgstr "Formatas retrokonektan dosieron %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"po艥tejon de la printilo kaj opcie la pordnumeron."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ""
+msgid "use pptp"
+msgstr "uzu pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Elektu kiuj servoj estu a怒tomate startigotaj dum starto"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Startas vian konekta牡on..."
+msgid "Learn how to use this printer"
+msgstr "膱u vi deziras provi la konfigura牡on?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Malproksima printilo"
+msgid "Configure the network now"
+msgstr "Konfiguru retumon"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Elektu spegulon de kiu havigi la paka牡ojn"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "NCP server name missing!"
+msgid ""
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
+"vian subdiskon, la sekvanta eraro okazis: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
+msgid "Which sector do you want to move it to?"
+msgstr "Al kiu sektoro vi deziras movi?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! 臏i eble estas malsama de 臐ia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn ta怒gan\n"
-"salutnomon kaj pasvorton."
+msgid "Do you want to click on this button?"
+msgstr "膱u vi deziras alklaki tiun butonon?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
+msgid "Bahamas"
+msgstr "Bahamoj"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+#, fuzzy, c-format
+msgid "Manual configuration"
+msgstr "Interreta Konfigurado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "search"
+msgstr "ser膲u"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
+"膱i tiu paka牡o 艥argas la elektitan klavarmapon la怒 /etc/sysconfig/keyboard.\n"
+"Vi povas elekti 膲i tion per la kbdconfig utilprogramo. Vi lasus 膲i tion\n"
+"ebligatan por la plejmulto da sistemoj."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installad-ekran-pelilo)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Samba share name missing!"
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
+"mesa臐ojn al diversaj sistemlogdosieroj. 臏i estas bona ideo 膲iam uzi\n"
+"syslog."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Malproksima printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Share name"
-msgstr "Opuza nomo"
+msgid "Unknown/Others"
+msgstr "Nekonata/Aliaj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
+msgid "No TV Card detected!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Po艥tejo de SMB servilo"
+msgid "Options"
+msgstr "Opcioj"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB po艥tejon (Notu! 臏i "
-"eble\n"
-"estas malsama de 臐ia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"ta怒gan salutnomon, pasvorton, kaj laborgrupan informon."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Presilo \"%s\" en servilo \"%s\""
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Malproksima po艥tejo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Malproksima po艥tejo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
+msgid "Auto-detected"
msgstr "Malproksima printilo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Malproksima po艥tejo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la po艥tejon de la\n"
-"printservilo kaj la printviconomon 膲e tiu servilo en kiun taskoj devus\n"
-"esti metata."
+"Nun kiam via Interreta konekto estas konfigurata,\n"
+"vi povas konfiguri vian komputilon por disdividi 臐ian Interretan konekton.\n"
+"Notu: vi bezonas dedi膲an Retadaptilon por konfiguri Lokan Reton (LAN).\n"
+"\n"
+"膱u vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Printila Aparato URI"
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
+msgstr ""
+"Ne libera spaco por 1mb-startparto! La instalado daurigos, sed por startigi "
+"vian sistemon, vi devos krei la startpartan subdiskon en DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Malakceptu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
+"HardDrake rulas aparato-provon, kaj la怒opcie konfiguras\n"
+"novan/艥an臐itan aparataron."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#, c-format
+msgid "Remote Printers"
+msgstr "Malproksimaj printiloj"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "Kreas kaj formatas dosieron %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+msgid "Choose an existing LVM to add to"
msgstr ""
+"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
+"aldoni al"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "La sekvaj paka牡oj estos malinstalataj"
+msgid "xfs restart"
+msgstr "limigu"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
+msgid "No partition available"
+msgstr "neniuj haveblaj subdiskoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+msgid "Use the scanners on hosts: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+msgid "Unselected All"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Printila Aparato URI"
+msgid "Domain Name Resolver"
+msgstr "Domajna nomo"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Loka printilo"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-presilo \\#%s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Presilo sur paralela pordo \\#%s"
+msgid "Samba share name missing!"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Presilo \"%s\" sur SMB/vindoza servilo \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Reta Printilo (TCP/ingo)"
+msgid "True Type install done"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Detected %s"
+msgid "Detection in progress"
msgstr "Duobla surmetingo %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Bonvenon al %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "Please insert the Update Modules floppy in drive %s"
msgstr ""
+"En艥ovu la disketon kun 臐isdatigaj moduloj (Update Modules) en drajvo %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Malproksima printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Via komputilo ne havas retadaptilon!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Printilo"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"Iuokaze, la %s pelilo bezonas havi aldonan informon por 臐uste funkcii,\n"
+"kvankam 臐i normale funkcias bone sen la informo. 膱u vi deziras specifi\n"
+"aldonajn opciojn por 臐i a怒 permesi al la pelilo esplori vian komputilon\n"
+"por la informo 臐i bezonas? Kelkfoje, esplori svenas komputilon, sed\n"
+"臐i ne devus ka怒zi difekton."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"%s\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
+"Click on Configure to launch the setup wizard."
+msgstr "Disdividado de Interreta Konekto"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cuba"
+msgstr "Kubo"
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Searching for new printers..."
+msgstr "Loka printilo"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+msgid "Belize"
+msgstr "Belizio"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " on "
+msgid "Kernel Boot Timeout"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "("
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
+"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Konfiguru Printilon"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "La Dispartigsor膲ilo de DrakX trovis 膲i tiujn solvojn:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "Loka printilo"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Hungara"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"Elektu vian interretprovizanton.\n"
+" Se 臐in ne estas en la listo, elektu Nelisti臐itan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "膱u vi deziras starti vian konekta牡on je startado de la sistemo?"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "膱u vi deziras provi printado?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "LDAP Servilo"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA subteno kutime estas subteno de a牡o kiel ethernet kaj modemoj en\n"
+"tekkomputiloj. 臏i ne estos lan膲ata krom se vi konfiguras 臐i por ke 臐i\n"
+"estu sendan臐era 膲e komputiloj kiuj ne bezonas 臐in."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Choose your country"
+msgstr "Elektu vian landon"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"There are %d unknown printers directly connected to your system"
+"- System Files:\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Standalone Tools"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+msgid "Where"
+msgstr "Rado"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr "sed ne konformanta(j)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../harddrake/sound.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Neniu printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Neniu printilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Kiun printsistemo vi deziras uzi?"
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "limigu"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Konfiguras PCMCIA kartojn..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu mankas"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "膱u tio 膲i pravas?"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Mikrosofta IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Printilaj Po艥tejo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Kristnask-Insulo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Instalado de start艥argilo malsukcesis. La sekvanta eraro okazis:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Malinstalu printvicon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Malinstalu printvicon"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Aldonu uzanto"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "partition %s"
+msgstr "subdisko: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoja"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Loka printilo"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Malinstalu printvicon"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Forvi艥u la tutan diskon"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Defa怒lta)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Post-instala konfigurado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Konfiguru retumon"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Finata"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP de SMB servilo"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Malproksima printilo"
+msgid "permissions"
+msgstr "subdisko: %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Interreta Konfigurado"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Anta怒a"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printilo"
+msgid "Internet Connection Sharing configuration"
+msgstr "Interreta konekta牡o kaj konfiguro"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "艤an臐u inter ebena kaj ordigita je grupoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Temoj"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opcioj: %s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Disdividado de Interreta Konekto"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "Interreta Konfigurado"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "Sankt-Heleno"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Security Level"
+msgstr "sekurnivelo"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"膲i tie; printiloj estos a怒tomate dektektataj. Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
+"Kelkaj pa艥oj ne fini臐is.\n"
+"\n"
+"膱u vi vere volas 膲esi nun?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
+msgid "Sudan"
+msgstr "Sudano"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
+msgid "Polish (qwertz layout)"
+msgstr "Pola (qwertz aran臐o)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "Sirio"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Bonvenon al %s, la mastruma sistema elektilo!\n"
+"\n"
+"Elektu mastruman sistemon de la supra listo aux\n"
+"atendu dum %d sekundoj por defauxlta starto.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugala"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Retrokonekta dosieronomo: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS-servila adreso devas esti en formato 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Serbia"
+msgstr "serba"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "膱i tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Instalu restart-艥argilon"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Elektu memorkapaciton de via grafika karto"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
+"[OPCIOJ]\n"
+"Reto & Interret-konektad kaj afi艥ad-aplika牡o\n"
+"\n"
+"--defaultintf interface : montras tiun interfacon defa怒lte\n"
+"--connect : konektas kun interreto se ne jam konektite\n"
+"--disconnect : malkonektas de interreto se jam konektite\n"
+"--force : uzata kun (dis)connect : trudas (mal-)konektadon.\n"
+"--status : montras 1 se konektite, alie 0, poste eliras.\n"
+"--quiet : ne estu interaktiva. Uzata kun (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM-nomo?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Trovis %s %s interfacojn"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Instalu"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Neniu printilo"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ de Karto"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
+"Litertipar-Import-kaj afi艥- aplika牡o \n"
+"--windows_import : importu de 膲iuj atingeblaj vindozaj subdiskoj.\n"
+"--xls_fonts : montru 膲iujn litertiparojn jam ekzistantajn de xls\n"
+"--strong : forta kontrolado de litertiparo.\n"
+"--install : akceptu 膲ian litertipar-dosieron kaj 膲ian dosierujon.\n"
+"--uninstall : malinstalu 膲ian litertiparon kaj 膲ian litertiparan "
+"dosierujon.\n"
+"--replace : anstata怒igu 膲ian litertiparon se jam ekzistas\n"
+"--application : 0 nenia aplika牡o.\n"
+" : 1 膲iuj haveblaj aplika牡oj subtenataj.\n"
+" : name_of_application a怒 iel tiel por staroffice \n"
+" : kaj gs por ghostscript nur por tiu 膲i."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Vi devas decidi pri kerno-bildo"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Do"
+msgstr "Faru"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Kontaktu la spegulon por havigi la liston de havebla paka牡oj"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litova AZERTY-a (malnova)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazila (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "System installation"
+msgstr "Sistem-nstalado"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Sent-Vincento kaj la Grenadinoj"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Dosiero/_Malfermu"
#: ../../security/help.pm:1
#, c-format
@@ -11801,820 +11438,693 @@ msgid ""
"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Kreas a怒toinstalan disketon"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Hungary"
+msgstr "Hungario"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Provu pordojn"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "New Zealand"
+msgstr "Nov-Zelando"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Bonvole, elektu la specon de via muso."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "艤altas de ext2 al ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Nederlandaj Antiloj"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Neniu printilo"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
+"Neniu ISDN-a PCI-a karto trovata. Bonvole elektu unu el la PCI-aj kartojn "
+"sur\n"
+"la sekvanta ekrano."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Elektu sekurnivelon?"
+#: ../../any.pm:1
+#, c-format
+msgid "Please give a user name"
+msgstr "Bonvole donu salutnomon"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcioj"
+#: ../../any.pm:1
+#, c-format
+msgid "Enable CD Boot?"
+msgstr "膱u ebligi CD Boot?"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid " enter `void' for void entry"
msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita. Sekurecaj aspektoj estas 膲e iliaj maksimumoj."
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on Hard Drive"
msgstr ""
-"Kun 膲i tiu sekurnivelo, uzado de 膲i tiu komputilo kiel servilo ebli臐as.\n"
-"La sekureco nun estas sufi膲e alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "Winmodem connection"
+msgstr "Winmodem-konekto"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"膱i tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento. Nun estas sekurecaj kontroloj."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankora怒\n"
-"ne rekomendita."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-"vi devus uzi 膲i tiun nivelon zorge. 臏i faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi 臐i surrete.\n"
-"臏i ne havas pasvortojn."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Higher"
-msgstr "Alta"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nesufi膲a inter艥an臐ospaco por plenumi instalado, bonvolu aldoni iom"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Alta"
+msgid "%s on %s"
+msgstr "%s sur %s"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Poor"
-msgstr "Malbona"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
+msgid "Which is your timezone?"
+msgstr "kio estas vian horzonon?"
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Bonvolu resaluti en %s-n por aktivigi la 艥an臐ojn."
+msgid "Guinea"
+msgstr "Gvineo"
-#: ../../standalone/XFdrake:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adia怒u kaj sekve uzu Kontrol-Alt-Retropa艥o (Ctrl-Alt-Backspace)."
+msgid "The system is now connected to the Internet."
+msgstr "La sistemo estas nun konektita al Interreto."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Sud-Georgio kaj la Sudaj Sandvi膲aj Insuloj"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
+msgid "Japan (broadcast)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
+msgid "Mozambique"
+msgstr "Mozambiko"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Icon"
+msgstr "Piktogramo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Neniu disketilo havebla"
+msgid "Please choose what you want to backup"
+msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "256 colors (8 bits)"
+msgstr "256 koloroj (8 bitoj)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "En艥ovu disketon en drajvo %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "rekonfiguru"
+msgid "Read-write"
+msgstr "Lega-skriba"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Size: %s\n"
+msgstr "Grandeco: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "LAN Konfigura牡o"
+msgid "Hostname: "
+msgstr "Po艥tejo: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Chunk size %s\n"
+msgstr "Grandeco de pecoj %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "IP Range Start:"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Servilo"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domajna nomo"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Local Printer"
+msgstr "Loka printilo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Retmasko"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL-konekto"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Mi konfiguras..."
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Forigu"
+msgid "Error!"
+msgstr "Eraro"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr ""
+msgid "cable connection detected"
+msgstr "kabla konekta牡on detektita"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Raportu Cimo"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thin Client"
-msgstr ""
+msgid "Resize"
+msgstr "Regrandecigu"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Speco: "
+msgid "Dominica"
+msgstr "Dominiko"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Del User"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Aldonu uzanto"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Elektu dosieron"
+msgid "Resolution: %s\n"
+msgstr "Distingivo: %s\n"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Forigu"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "matching"
+msgstr "konformanta(j)"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
+"Bonvolu elekti la 臐ustan pordon. Ekzemple, la \"COM1\"-a\n"
+"pordo sub MS Vindozo estas nomata \"ttyS0\" sub GNU/Linukso."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Ne konektita"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "La sekvaj paka牡oj estos malinstalataj"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "Konektu al la Interreto"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Uzu ekzistantajn subdiskojn"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Canadian (Quebec)"
+msgstr "Kanada (Kebeka)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Musaparato: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+msgid "We are now going to configure the %s connection."
+msgstr "Ni konfiguros nun la %s-konekton."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Aldonu uzanto"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "MandrakeExpert Corporate"
+msgstr "Spertulo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
+" [膲io]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Servilo"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS Servilo"
+msgid "Write protection"
+msgstr "Malproksima printilo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Datumbazoj"
+msgid "You've not selected any font"
+msgstr "Malinstalu printvicon"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Datumbazoj"
+#: ../../steps.pm:1
+#, c-format
+msgid "Language"
+msgstr "Elektu vian lingvon"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Interreta Konfigurado"
+msgid "Printer model selection"
+msgstr "Printilan Konekton"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Formatas retrokonektan dosieron %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Post vi 艥an臐as la specon de subdisko %s, 膲iuj datenoj en 膲i tiu subdisko "
+"estos\n"
+"perdata"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Aldonu uzulon"
+#: ../../common.pm:1
+#, c-format
+msgid "%d seconds"
+msgstr "%d sekundoj"
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Instalu"
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, c-format
+msgid "Insert a blank floppy in drive %s"
+msgstr "En艥ovu malplenan disketon en drajvo %s"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Gratulojn!"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Sound configuration"
+msgstr "Son-konfigurado"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Kreas a怒toinstalan disketon"
+msgid "Photo test page"
+msgstr "Printas provpa臐o(j)n..."
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "subdiskigo"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "Reludu"
+msgid "type: %s"
+msgstr "Speco: "
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaka (QWERTY)"
+
+#: ../../standalone/draksound:1
+#, fuzzy, c-format
+msgid "No Sound Card detected!"
+msgstr "Ne konektita"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Muspordo"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
+msgid "Ftp Server"
+msgstr "NIS Servilo"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
-msgid "I can't find needed image file `%s'."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "%s fonts conversion"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Error!"
-msgstr "Eraro"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Uganda"
+msgstr "Ugando"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoroj"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
"\n"
"\n"
-msgstr ""
+"Ni konfiguros nun l %s konekton.\n"
+"\n"
+"\n"
+"Premu JES por da怒rigi."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot modalo"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Nespecifa 3 Butona Muso"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Bonvole, elektu la specon de via muso."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Opuza nomo"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12626,4582 +12136,5125 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "Network & Internet"
+msgstr "Reto kaj Interreto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore"
-msgstr "Resta怒ru de dosiero"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litova \"fonetika\" QWERTY-a"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Dosiersistemo konfiguro"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "LAN Konfigura牡o"
+msgid "Sharing of local scanners"
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "LAN Konfigura牡o"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Reta Konfigura牡o"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "Servoj kaj demonoj"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Reta Konfigura牡o"
+msgid "Remote host name missing!"
+msgstr "Malproksima po艥tejo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Reta Konfigura牡o"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "with /usr"
+msgstr "kun /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Total Progress"
+msgid "Network"
+msgstr "Reto"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Konservu en dosiero"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "膱i tiu pasvorto estas tro simpla"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaka (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Malbona rezerva dosiero"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Vere minimuma instalado (precipe ne urpmi)"
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Malbona rezerva dosiero"
+#, c-format
+msgid ""
+" Transfer \n"
+"Now"
+msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Malbona rezerva dosiero"
+msgid "Use daemon"
+msgstr "Salutnomo"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "A怒tentikigado"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP de SMB servilo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Kie vi deziras kro膲i aparaton %s?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
+msgid "Restore Via Network"
+msgstr "Resta怒ru de dosiero"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Bonvole, elektu lingvon por uzi."
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Al臐erio"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "La sekvaj paka牡oj estos instalataj"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-grandeco"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Sekvanta ->"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- Anta怒a"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPCIO]...\n"
+" --no-confirmation ne postulu unue konfirmadon en MandrakeUpdate mode\n"
+" --no-verify-rpm ne kontrolu la paka牡-subskribojn\n"
+" --changelog-first afi艥u changelog anta怒 dosierliston en la priskribo-"
+"fenestro\n"
+" --merge-all-rpmnew proponu mergi 膲iujn trovitajn .rpmnew/.rpmsave -"
+"dosierojn"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Stato:"
+msgid "Setting Default Printer..."
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Malbona rezerva dosiero"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Resta怒ru de dosiero"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Nomo: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Sava subdiskotabelo"
+msgid "Generating preview ..."
+msgstr "Detektas aparatojn..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr ""
+msgid "serial"
+msgstr "seria"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Akomodata"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr ""
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Kartvela (\"Latina\" aran臐o)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Resta怒ru de dosiero"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, c-format
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Po艥tejo: "
+#: ../../lang.pm:1
+#, c-format
+msgid "Kenya"
+msgstr "Kenjo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "Salutnomo"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Uzu ``Malmuntu'' anta怒e"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing mtools packages..."
+msgstr "Instalanta paka牡ojn mtools..."
+
+#: ../../any.pm:1
+#, c-format
+msgid "You must specify a root partition"
+msgstr "Vi devas difini radikan (root) subdiskon"
+
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Pasvorto"
+msgid "first step creation"
+msgstr "Startdiskokreado"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Po艥tejo"
+msgid "Select a scanner model"
+msgstr "Elektu grafikan karton"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Resta怒ru de dosiero"
+msgid "Drakbackup Configuration"
+msgstr "Reta Konfigura牡o"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Savu Kiel..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Sava subdiskotabelo"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Korea (North)"
+msgstr "Koreio (Norda)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "A怒tomata-enregistrado"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Resta怒ru de disketo"
+#: ../../install_gtk.pm:1
+#, c-format
+msgid "System configuration"
+msgstr "Sistem-konfigurado"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Resta怒ru de dosiero"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Malinstalu printvicon"
+msgid "Configuring printer ..."
+msgstr "Konfiguru Printilon"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Resta怒ru de dosiero"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Resta怒ru de dosiero"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Alia"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "Insuloj Virgaj (Britaj)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Bonvole, elektu la specon de via muso."
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr "Bermudo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Resta怒ru de disketo"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Bonvole, provu la muson"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Malbona rezerva dosiero"
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, c-format
+msgid "Remove"
+msgstr "Forigu"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Bonvole, elektu la specon de via muso."
+#: ../../lang.pm:1
+#, c-format
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Malbona rezerva dosiero"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "OK to restore the other files."
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "Jes"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr "Ebur-Bordo"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Kiun protokolon vi deziras uzi?"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "Reta Konfigura牡o"
+msgid "Restore Progress"
+msgstr "Resta怒ru de dosiero"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Estonia"
+msgstr "Estonio"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " All of your selected data have been "
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Backup files are corrupted"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"Vi havas truon en via subdisktabelo sed mi ne povas uzi 臐in.\n"
+"La sola solvo estas movi viajn 膲efajn subdiskojn por situigi la truon\n"
+"apud la etendataj subdiskoj."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Nuligu"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "Add"
+msgstr "Aldonu"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+msgid " Error while sending mail. \n"
+msgstr "Eraro legante dosiero %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Klavaro"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Elektu la konekton kiun vi deziras konfiguri"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Elektas sekurnivelon"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by webdav.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Konfiguras retan aparaton %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid "activated"
+msgstr "aktiva"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
+"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Trovadas paka牡ojn por promocii"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Surmetingo: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\t-CDROM.\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "With X"
+msgstr "Kun X"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Multi-head configuration"
+msgstr "Plur-ekrana konfigura牡o"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
msgstr ""
+"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta怒 la instalado"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Daemon (%s) include:\n"
+"%s"
msgstr ""
+"膱u vi deziras teni la 艥an臐ojn?\n"
+"Nuna konfiguro estas:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"La rwho protokolo permesas al uzuloj havigi liston de 膲iuj el la uzuloj\n"
+"konektataj 膲e komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Domajna nomo"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcioj"
+msgid "Sharing of local printers"
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Loka printilo"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Empty"
+msgstr "Malplena"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save to Tape on device: %s"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " (multi-session)"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Musaparato: %s\n"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Kie vi deziras munti aparato %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "RW"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Interfaco \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "With basic documentation (recommended!)"
+msgstr "Kun baza dokumenta牡o (rekomendita!)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "1 button"
+msgstr "1 butona"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Other Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
+msgid "Test"
+msgstr "Testo"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- System Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Korea"
+msgstr "Koreio"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Your choice? (default `%s'%s) "
+msgstr "Via elekto? (defa怒lto '%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Neniu printilo"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Backup Users"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Dosiersistemo konfiguro"
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Vendor"
+msgstr "Vendinto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s"
+msgstr "Interfaco %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Konfiguru muson"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Elektu surmetingojn"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "across Network"
-msgstr ""
+msgid "OK"
+msgstr "Jes"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslava (latina)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Instalanta"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Modulaj opcioj:"
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr "Lan膲u userdrake"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "Rado"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "膱u tiu 膲i estas instalado a怒 臐isdatigo?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Where"
-msgstr "Rado"
+msgid "ISDN card"
+msgstr "Interna ISDN-karto"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "What"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Bonvole, elektu lingvon por uzi."
+msgid "Printer on remote CUPS server"
+msgstr "Malproksima CUPS-a servilo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Salutnomo"
+msgid "delete"
+msgstr "Forigu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Po艥tejo"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "weekly"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Poor"
+msgstr "Malbona"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Bonvole, provu la muson"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr "Grenado"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Dan臐era"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektoroj"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Ne"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Malbona rezerva dosiero"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guadeloupe"
+msgstr "Gvadelupo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Elektu dosieron"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "Vertikala refre艥igrapido (vertical refresh rate)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Eniras pa艥on `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Lo臐iteka MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Bonvolu klaki sur subdiskon"
+msgid "Removing %s ..."
+msgstr "Distingivo: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Ni臐ero"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Bonvolu klaki sur subdiskon"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No printer"
+msgstr "Neniu printilo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Bonvole, elektu vian klavaran aran臐on."
+msgid "alert configuration"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "NetWare Printilaj Opcioj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "General"
+msgstr "臏enerala"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Neniu pasvorto"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Bonvole provu denove"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Aldonu uzulon"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Bonvole provu denove"
+msgid "Network configuration (%d adapters)"
+msgstr "ISDN-a Konfigura牡on"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Bonvole, provu la muson"
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipinoj"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Ok"
+msgstr "Jeso"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "Print Queue Name"
+msgstr "Printvica Nomo"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "膱u vi deziras uzi aboot-on?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusa"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Move files to the new partition"
+msgstr "Movu dosierojn al la nova subdisko"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Net Method:"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Malbona rezerva dosiero"
+msgid "Restore From Catalog"
+msgstr "Sava subdiskotabelo"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Salutnomo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Pitcairn"
+msgstr "Pitkarna Insulo"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "IDE"
+msgstr "IDE"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Forigu Vindozon"
+msgid "group :"
+msgstr "Laborgrupo"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Malinstalu printvicon"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo screen"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Do not include the browser cache"
+msgid "LILO with graphical menu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Taksas"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
+msgstr "Vi ne povas malelekti 膲i tiun paka牡on. 臏i estas jam instalita."
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Bonvole, elektu la paka牡ojn kiujn vi deziras instali."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Vindozo 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid "Go on anyway?"
+msgstr "膱u vi deziras da怒ri tamen?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Ser膲as haveblajn paka牡ojn kaj refaras la rpm-datenbazon..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Malbona rezerva dosiero"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Specify options"
+msgstr "Specifu opciojn"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Vanuatu"
+msgstr "Vanuatuo"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
+"sendepende de la normala start艥argilo. 膱i tiu estas utila se vi ne deziras\n"
+"instali SILO sur via sistemo, a怒 alia mastruma sistemo forigas SILO,\n"
+"a怒 SILO ne funkcias kun via aparato-konfigura牡o. Akomodita startdisketo "
+"anka怒\n"
+"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani臐i de\n"
+"severaj sistemaj paneoj.\n"
+"\n"
+"Se vi deziras krei startdisketon por via sistemo, en艥ovu disketon en la\n"
+"unua drajvo kaj klaku \"JES\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Elektado de Paka牡oj"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Vi ne povas uzi kriptan dosiersistemon por surmetingo %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "Norfolkaj Insuloj"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Eraro legante dosiero %s"
+msgid "Theme installation failed!"
+msgstr "Elektu instalklason"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Uzu por retrokonektado"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "uzu pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Malbona rezerva dosiero"
+msgid "Moving files to the new partition"
+msgstr "Mi movas dosierojn al la nova subdisko"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Malbona rezerva dosiero"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Malbona rezerva dosiero"
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Progresinta"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Transfer"
msgstr ""
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak-a (Sveda)"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Malbona rezerva dosiero"
+msgid "More Options"
+msgstr "Modulaj opcioj:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup system files..."
-msgstr ""
+msgid "Afghanistan"
+msgstr "Afganistano"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No tape in %s!"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"cron estas norma Uniksa programo kiu lan膲as programojn kiujn la uzulo\n"
+"specifas je periodaj tempoj. vixie cron aldonas kelkajn trajtojn al la\n"
+"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
+"konfiguraj opcioj."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Burundi"
+msgstr "Burundo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Not erasable media!"
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "Legu zorge"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Provu pordojn"
+msgid "Port"
+msgstr "Pordo"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s not responding"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr ""
+"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
+"redakti la"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Neniu pasvorto"
+msgid "The encryption keys do not match"
+msgstr "La pasvortoj ne egalas"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "Dekstra \"Vindozo\"-klavo"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Distingivoj"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
+"Bonvole tajpu vian uzulnomon, pasvorton kaj domajn-nomon por aliri al tiu "
+"gastiganto."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Malinstalu printvicon"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Reta Konfigura牡o"
+
+#: ../../any.pm:1
+#, c-format
+msgid "No sharing"
+msgstr "Ne kundivido"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Bonvolu klaki sur subdiskon"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "Dosierlokigtabelo (FAT)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Forigu"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalado de %s malsukcesis. La sekvanta eraro okazis:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"Mi povas konfiguri vian komputilon tiel ke 臐i a怒tomate lan膲os X kiam 臐i\n"
+"ekfunkcias. 膱u vi deziras ke X a怒tomate lan膲os?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
+msgid "Build the disk"
+msgstr "Konstruu la diskon"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Malkonektu"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
+msgid "Status:"
+msgstr "Stato:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "Sistema modalo"
+msgid "HTTP proxy"
+msgstr "HTTP prokura servilo"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS Servilo"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Lilo screen"
-msgstr ""
+msgid "European protocol"
+msgstr "E怒ropa protokolo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Themes"
-msgstr "Temoj"
+msgid "Error"
+msgstr "Eraro"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Elektado de individuaj paka牡oj"
+#: ../../any.pm:1
+#, c-format
+msgid "allow \"su\""
+msgstr "permesu \"su\""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "Australia"
+msgstr "Auxstralio"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfiguru nur karton \"%s\"%s"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Elektu instalklason"
+msgid "Level"
+msgstr "nivelo"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "agrabla(j)"
+msgid "Change the printing system"
+msgstr "Konfiguru retumon"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
+"Via sistemo subtenas multkapo-konfiguradon.\n"
+"Kion vi deziras fari?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "Konfiguru servojn"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "mount failed: "
+msgstr "muntado malsukcesis: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "Kerna bildo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "Remote Administration"
+msgstr "Malproksima administrado"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr "PCMCIA-subteno ne ekzistas plu por 2.2-kernoj. Bonvole uzu 2.4-kernon."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Kreu novan subdiskon"
+msgid "Selected All"
+msgstr "Elektu dosieron"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Instalu sistemon"
+msgid "Webmin Service"
+msgstr "Servilo"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modalo"
+msgid "device"
+msgstr "aparato"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modalo"
+msgid "All"
+msgstr "膱iuj"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Kiun printsistemo vi deziras uzi?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Foriru"
+msgid "Greece"
+msgstr "Grekio"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta怒 la instalado"
+msgid "An error occurred"
+msgstr "Eraro okazis"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"膱i tiu paka牡o devus esti promociata.\n"
+"膱u vi certas ke vi deziras malelekti 臐in?"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Eliru instalprogramon"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamila (skribma艥ina)"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Eliru instalprogramon"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Standalone Tools"
+msgid "Printer manufacturer, model, driver"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Report"
-msgstr "porto"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Ne estas medio en aparato %s.\n"
+"Bonvole en艥ovu 臐in."
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
+"Dosierujo %s entenas jam datenojn\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Bonvole atendu"
+msgid "Printer on NetWare server"
+msgstr "Printservilo"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Donu kvanton de memoro en MB"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Elektado de Paka牡oj"
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "Vera nomo"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Application:"
-msgstr "A怒tentikigado"
+msgid "done"
+msgstr "Finata"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ISDN-a Konfigura牡on"
+msgid "Please uncheck or remove it on next time."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Printilo"
+msgid "Higher"
+msgstr "Alta"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr ""
+msgid "Choose the partitions you want to format"
+msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Urpmi"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Opuza nomo"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "Muso"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Spertulo"
+msgid "Can't find %s on %s"
+msgstr "Ne povis malfermi %s por skribi: %s\n"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Konekti al la interreto"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Japanese 106 keys"
+msgstr "Japana 106 klavoj"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "HardDrake"
+msgid "This will take a few minutes."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid "Burkina Faso"
+msgstr "Burkino"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Bonvenon al Unuafoja Sor膲ilo"
+msgid "Delete selected rule"
+msgstr "Malinstalu printvicon"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Konekti al la interreto"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Malproksima CUPS-a servilo"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
+msgid "Insert a floppy in %s"
+msgstr "En艥ovu disketon en %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "Interreta konekta牡o kaj konfiguro"
+msgid "Maldives"
+msgstr "Maldivoj"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr ""
+msgid "compact"
+msgstr "kompakta"
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "1 minute"
+msgstr "1 minuto"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Kluzo"
+msgid "on channel %d id %d\n"
+msgstr "膲e kanalo %d identiga牡o %d\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Profile: "
-msgstr "muntado malsukcesis: "
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "Interreta konekta牡o kaj konfiguro"
+msgid ", multi-function device"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
+msgid "Laos"
+msgstr "Laoso"
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
+"Ne ekzistas FAT-a subdisko por regrandecigi\n"
+"(a怒 ne estas sufi膲e da spaco)"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "Aktiva"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "Aktiva"
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "DHCP client"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Started on boot"
+msgid "Firewall"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Boot Protocol"
+msgid "Area:"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA-kontroliloj"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN Konfigura牡o"
+msgid "Printer Server"
+msgstr "Printservilo"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN Konfigura牡o"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Konektu..."
+msgid "Saint Pierre and Miquelon"
+msgstr "Sanpetro-kaj-Mikelono"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Malkonektu..."
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Not connected"
-msgstr "Ne konektita"
+msgid "saving Bootsplash theme..."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connected"
-msgstr "Konektita"
+msgid "Portugal"
+msgstr "Portugalujo"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "膱u vi havas alian?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", printing to %s"
+msgstr ", presante sur %s"
+
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Interface:"
-msgstr "Interreto"
+msgid "Assign host name from DHCP address"
+msgstr "Bonvole, provu la muson"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Kluzo:"
+msgid "Toggle to normal mode"
+msgstr "艤an臐u al Normala re臐imo"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Apply"
-msgstr "Apliku"
+msgid "Generic"
+msgstr "Genera"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr ""
+msgid "Cylinder %d to %d\n"
+msgstr "cilindro %d 臐is cilindro %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Wizard..."
-msgstr "Sor膲isto..."
+msgid "New profile..."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Status:"
-msgstr "Stato:"
+msgid "Which disk do you want to move it to?"
+msgstr "Al kiu disko vi deziras movi?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Type:"
-msgstr "Speco:"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet access"
-msgstr "Interreto"
+msgid "Display logo on Console"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Po艥tejo: "
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
+msgid "Windows Domain"
+msgstr "Vindozo Domajno"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "State"
-msgstr "Stato:"
+msgid "Interface %s (on network %s)"
+msgstr "Interfaco %s"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Driver"
-msgstr "Pelilo"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokolo"
+msgid "Wallis and Futuna"
+msgstr "valis-kaj-futuna"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface"
-msgstr "Interfaco"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfiguru servojn"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wait please"
+msgid "There are no scanners found which are available on your system.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"Ne pli da informo\n"
+"pri tiu servo, beda怒rinde."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr ""
+msgid "Is this correct?"
+msgstr "膱u tio 膲i pravas?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Del profile..."
-msgstr ""
+msgid "Marshall Islands"
+msgstr "Insuloj Mar艥alaj"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a Konfigura牡on"
+msgid "Windows (FAT32)"
+msgstr "Forigu Vindozon"
-#: ../../standalone/drakedm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Root password"
+msgstr "Root-pasvorto"
-#: ../../standalone/drakedm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choosing a display manager"
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "if set to yes, report unowned files."
msgstr ""
-"Ne povis 臐uste fermi mkbootdisk-on: \n"
-" %s \n"
-" %s"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne povis forki: %s"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
-"Ne estas medio en aparato %s.\n"
-"Bonvole en艥ovu 臐in."
+"Vi ne havas inter艥an臐an subdiskon\n"
+"\n"
+"膱u vi deziras da怒ri tamen?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Printilaj Po艥tejo"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Kontrolu ke medio estas en la aparato %s"
+msgid "Suriname"
+msgstr "Surinamo"
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Konstruu la diskon"
+msgid "Enable ACPI"
+msgstr "Ebligu ACPI"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "Output"
-msgstr "Skribu"
+msgid "Graphical Environment"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Forprenu modulon"
+msgid "Gibraltar"
+msgstr "臏ibraltaro"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add a module"
-msgstr "Aldonu modulon"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "forlasu SCSI-ajn modulojn"
+msgid "Do nothing"
+msgstr "Faru nenion"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "Forigu"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if needed"
-msgstr "se bezonata"
+msgid "Filesystem type: "
+msgstr "Speco de dosiersistemo: "
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Startas vian konekta牡on..."
+
+#: ../../lang.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "forlasu RAID-ajn modulojn"
+msgid "Vietnam"
+msgstr "Vjetnamio"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Priskribo"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "force"
-msgstr "devigu"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd opciaj argumentoj"
+msgid "Help"
+msgstr "Helpo"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Expert Area"
-msgstr "Spertulejo"
+msgid "Your personal phone number"
+msgstr "Via persona telefonnumero"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "kernel version"
-msgstr "Kerna versio"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"Provpa臐o(j)n estis sendataj al la printila demono.\n"
+"膱i tiu eble postulas iom da tempo anta怒 ol la printilo komencas.\n"
+"膱u 臐i 臐uste funkcias?"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Salutnomo"
+
+#: ../../help.pm:1
#, c-format
-msgid "default"
-msgstr "defa怒lta"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "General"
-msgstr "臏enerala"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Startdiskokreado"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd opciaj argumentoj"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Size"
-msgstr "Grandeco"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Module name"
-msgstr "Modulonomo"
+msgid "Protocol for the rest of the world"
+msgstr "Protokolo por la cetera mondo"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Eliru instalprogramon"
+msgid "Print test pages"
+msgstr "Printas provpa臐o(j)n..."
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "64 MB or more"
+msgstr "64 MB a怒 pli"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initial tests"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Instalu"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Install & convert Fonts"
+msgid "Not formatted\n"
+msgstr "Ne formatita\n"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
+msgid "PXE Server Configuration"
+msgstr "LAN Konfigura牡o"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Malproksima printilo"
+msgid "Backup the system files before:"
+msgstr "Malbona rezerva dosiero"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Elektu dosieron"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"膱i tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
+"por konekti al la Interreto kiel kliento. Nun estas sekurecaj kontroloj."
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Unselected All"
+msgid "First floppy drive"
+msgstr "Unua disketa drajvo"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Dosiero/_Foriru"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak-a"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Elektu la novan grandecon"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "here if no."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
+msgid "Faroe Islands"
msgstr ""
#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Install List"
-msgstr "Instalu sistemon"
+msgid "Restart XFS"
+msgstr "limigu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Printilo"
+msgid "Please enter the directory to save to:"
+msgstr "Bonvole, provu la muson"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "膱esigu"
+msgid "Model name"
+msgstr "Modulonomo"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Oficejo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "Albanio"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normala Modalo"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "About"
-msgstr "膱esigu"
+msgid "Printer connection type"
+msgstr "Disdividado de Interreta Konekto"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Surmetingo"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "LAN Konfigura牡o"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Network %s"
+msgstr "Reto %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr ""
+msgid "Malayalam"
+msgstr "Malajalama"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Formatu subdiskojn"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "done"
-msgstr "Finata"
+msgid "Connect %s"
+msgstr "Konektu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
+msgid "Restarting CUPS..."
msgstr "limigu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Presanta/skananta foton karton per \"%s\""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "limigu"
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr "Duobla surmetingo %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Konfigurado de Konekto"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Unknown|Generic"
+msgstr "Nekonata|Genera"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Quit"
+msgstr "膱esu"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Myanmar"
+msgstr "Mianmaro"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Auto allocate"
+msgstr "A怒tomate disponigu"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "膱u kontrolas malbonajn blokojn?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Other MultiMedia devices"
+msgstr "Alia bildson-aparatoj"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Preparas instaladon"
+msgid "No remote machines"
+msgstr "Malproksima printilo"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Fonts copy"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "A怒tentikiga NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Card IO_0"
+msgstr "I/O 0 (Eneligo 0) de Karto"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "neniu retkarto trovita"
+#: ../../lang.pm:1
+#, c-format
+msgid "United Arab Emirates"
+msgstr "Unui臐intaj Arabaj Emirlandoj"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "parse all fonts"
+msgid "Card IO_1"
+msgstr "I/O 1 (Eneligo 1) de Karto"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
+msgstr "Tajlando"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "Kazakhstan"
+msgstr "Kaza磨stano"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "Mandrake Linux Installation %s"
+msgstr "Linuks-Mandrejka Instalado %s"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Thai keyboard"
+msgstr "Taja klavaro"
+
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr "Telefon-konektaj opcioj"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bouvet Island"
+msgstr "Buvet-Insulo"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
+"Change your Cd-Rom!\n"
"\n"
-"%s\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgstr ""
+"艤an臐u vian KDROM!\n"
"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
+"Bonvole, en艥ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
+"\"\n"
+"kiam vi finos.\n"
+"Se vi ne havas 臐in, klaku \"Nuligu\" por eviti la instaladon de 膲i tiu KDROM."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Interreta konekta牡o kaj konfiguro"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr "Pola"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
+msgid "Mandrake Online"
+msgstr "Konekti al la interreto"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The setup has already been done, and it's currently enabled."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by webdav.\n"
msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The setup has already been done, but it's currently disabled."
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+"Mi ne detektas eterretan retadaptilom sur via sistemo. Bonvole lan膲u la\n"
+"aparatokonfigurilon."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
+msgid "Netmask"
+msgstr "Retmasko"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante paka牡on %s"
+msgid "No hard drives found"
+msgstr "Neniaj durdiskoj trovitaj"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
+msgid "Logitech CC Series"
+msgstr "Lo臐iteka CC serio"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
+msgid "2 buttons"
+msgstr "2 butonoj"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Kia estas via ISDN-a konekta牡o?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Label"
+msgstr "Etikedo"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Konservu sur disketo"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer auto-detection"
+msgstr "Malproksima printilo"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Which of the following is your ISDN card?"
+msgstr "Kiu el la sekvaj estas via ISDN-karto?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
+"膱i tiu servo provizas NFS dosier艥losado, kiun vi konfiguras per la\n"
+"/etc/exports dosiero."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Msec"
+msgstr "Muso"
+
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid "Number of capture buffers:"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Neniu printilo"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP de SMB servilo"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Via elekto? (0/1, defa怒lo '%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Franca"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "膱e磨a (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "neniu retkarto trovita"
+msgid "Hardware probing in progress"
+msgstr "Duobla surmetingo %s"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Printservilo"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Summary"
+msgstr "Resumo"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Interreta Konfigurado"
+msgid "Next"
+msgstr "Sekvanta ->"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Interreta Konfigurado"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Vi ne povas instali la start艥argilon en %s-subdiskon\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
+msgid "CHAP"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Post-instala konfigurado"
+#: ../../network/network.pm:1
+#, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Ekrano ne estas konfigurata"
+#: ../../lang.pm:1
+#, c-format
+msgid "Puerto Rico"
+msgstr "Porto-Riko"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litova \"numero-vica\" QWERTY-a"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"膱u vi deziras konfiguri vian Lokan Reton (LAN) kun 膲i tiu adaptilo?"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Reta interfaco"
+msgid "Anguilla"
+msgstr "Angilo"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS Domajno"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo. Bonvole lan膲u la\n"
-"aparatokonfigurilon."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
+msgid "Antarctica"
+msgstr "Antarktio"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
+msgid "Mount options"
+msgstr "Kro膲-opcioj"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Printservilo"
+msgid "Jamaica"
+msgstr "Jamajko"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi 臐ian Interretan konekton.\n"
-"Notu: vi bezonas dedi膲an Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"膱u vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
+msgid "Please wait, preparing installation..."
+msgstr "Bonvole atenduj, mi preparas instaladon..."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTZ)"
+msgstr "膱e磨a (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
+msgid "Track network card id (useful for laptops)"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "forsendu"
+msgid "The port number should be an integer!"
+msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "rekonfiguru"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Printila Aparato URI"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "Resta怒ru de disketo"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "enable"
-msgstr "ebligu"
+msgid "Add to LVM"
+msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "DNA servilo"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
+msgid "Trinidad and Tobago"
+msgstr "Trinidado kaj Tobago"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
+#: ../../fsedit.pm:1
+#, c-format
+msgid "simple"
+msgstr "simpla"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "disable"
-msgstr "malebligu"
+msgid "Clear all"
+msgstr "Forvi艥u 膲ion"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
+msgid "No test pages"
+msgstr "Jes, printu amba怒 de la provpa臐ojn"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
+msgid "Adapter %s: %s"
+msgstr "Adaptilo %s: %s"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandaj Insuloj (Malvinoj)"
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Unknown model"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group :"
-msgstr "Laborgrupo"
-
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Salutnomo"
+msgid "authentication"
+msgstr "A怒tentikigado"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Elektado de individuaj paka牡oj"
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "Backup Now"
+msgstr "Dosiersistemo konfiguro"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr ""
+msgid "/_File"
+msgstr "/_Dosiero"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
+"Lan膲u paka牡filtradon por Linuksa kerno 2.2-serioj, por konfiguri\n"
+"brulmuron por protekti vian ma艥inon kotra怒 elretaj atakoj."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamila (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Mayotte"
+msgstr "majota"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Kreas a怒toinstalan disketon"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "Pordo"
+msgid "Searching for scanners ..."
+msgstr "Loka printilo"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Versio: %s\n"
+#: ../../steps.pm:1
+#, c-format
+msgid "Partitioning"
+msgstr "Subdiskigante"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "Akceptu uzanto"
+#: ../../lang.pm:1
+#, c-format
+msgid "Russia"
+msgstr "Rusio"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
+msgid "ethernet card(s) detected"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Syslog"
+msgstr "sistema logdosiero (syslog)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Forigu"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr "Ne sufi膲e da libera spaco por a怒tomate disponigi novajn subdiskojn"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Neniu printilo"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Difinu pasvorton de root"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Aldonu modulon"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Ne ekzistas libera pelilo por via sonkarto (%s), sed ekzistas proprieta "
+"pelilo 膲e \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
+"Post vi regrandecigas subdiskon %s, 膲iuj datenoj en 膲i tiu subdisko estos\n"
+"perdata"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Down"
-msgstr "Finata"
+msgid "Internet connection configuration"
+msgstr "Interreta konekta牡o kaj konfiguro"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_About..."
+msgstr "/Helpo/_Pri..."
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Bengali"
+msgstr "bengala"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Preference: "
+msgstr "Prefero: "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Wizard..."
+msgstr "Sor膲isto..."
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, c-format
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "subdisko: %s"
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "Kreu pra艥argdisketon"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
-msgstr "Laborgrupo"
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
+msgstr "Salomon-Insuloj"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "Salutnomo"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(modulo %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr ""
+msgid "Workgroup"
+msgstr "Laborgrupo"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Kreas a怒toinstalan disketon"
+msgid "Printer host name or IP"
+msgstr "Printilaj Po艥tejo"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "Loka printilo"
+msgid "Show current interface configuration"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "LAN Konfigura牡o"
+msgid "Development"
+msgstr "Programisto"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Done"
+msgstr "Finata"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP end ip"
+msgid "Web Server"
+msgstr "Interret-servilo"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid "Chile"
+msgstr "膱ilio"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfaco %s"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr "(jam aldonis %s)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi 臐ian Interretan konekton.\n"
-"Notu: vi bezonas dedi膲an Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"膱u vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "LAN Konfigura牡o"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "LAN Konfigura牡o"
+msgid "Add/Del Users"
+msgstr "Aldonu uzanto"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Preparas instaladon"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Elektas sekurnivelon"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
+msgid "Settings"
+msgstr "Konfigura牡oj"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Modulaj opcioj:"
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Jen la kompleta listo de atingeblaj landoj"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Modulaj opcioj:"
+msgid "Alternative test page (A4)"
+msgstr "Printas provpa臐o(j)n..."
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Se vi havas 膲iujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
+"Se vi havas neniujn de 膲i tiuj KDROM-oj, klaku \"Nuligu\".\n"
+"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
+"\"."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Elektas sekurnivelon"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP (Pasvorta A怒tentikigada Protokolo)"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Elektas sekurnivelon"
+msgid "Backup user files"
+msgstr "Malbona rezerva dosiero"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Defa怒lta)"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "New"
+msgstr "Nova"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "艤argu de disketo"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Ne konektita"
+msgid "The following printer was auto-detected. "
+msgstr "La sekvaj paka牡oj estos malinstalataj"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Detektas aparatojn..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Printila Aparato URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norvega"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Printilan Konekton"
+msgid "Searching for new scanners ..."
+msgstr "Loka printilo"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Elektu agon"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Elektu agon"
+msgid "select path to restore (instead of /)"
+msgstr "Bonvole, elektu la specon de via muso."
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Konfiguru servojn"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "China"
+msgstr "膱inio"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Elektu ekranon"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Instalu sistemon"
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Kartvelujo"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "aparato"
+msgid "Reading data of installed printers..."
+msgstr "Loka printilo"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "servilo"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "En艥ovu FAT-formatitan disketon en drajvo %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Bonvole atendu... Mi aplikas la konfigura牡on"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
+msgid "Grub"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
+msgid "SCSI controllers"
+msgstr "SCSI-kontroliloj"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Opuza nomo"
+msgid "Zeroconf Host name"
+msgstr "Po艥tejo"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Distingivo"
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Ekvadoro"
+
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "Startdiskokreado"
+msgid "Add an item"
+msgstr "Aldonu uzulon"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Ne detektis sonkarto. Provu \"harddrake\" post instalado"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr ""
+msgid "Shell"
+msgstr "艤elo"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Sao-Tomeo kaj Principeo"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ne povas akcepti uzante uzulnomon %s (膲u mal臐usta pasvorto?)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaj臐ana (latina)"
+
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Estis eraro dum instalado de paka牡oj:"
+msgid "Package not installed"
+msgstr "Eliru instalprogramon"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, fuzzy, c-format
+msgid "Become a MandrakeExpert"
+msgstr "Spertulo"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
+msgid "American Samoa"
+msgstr "Amerika Samoo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Protocol"
+msgstr "Protokolo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "Via komputilo ne havas retadaptilon!"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Area:"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "TV norm:"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Interreta Konfigurado"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Newzealand"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Franca"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "Vi ne povas elektu/malelektu 膲i tiun paka牡on"
+
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "Averto"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "E怒ropo"
+msgid "Remote host name"
+msgstr "Malproksima po艥tejo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "E怒ropo"
+msgid "deactivate now"
+msgstr "Aktiva"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "access to X programs"
+msgstr "aliro al X-programoj"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "Computing the size of the Windows partition"
+msgstr "Kalkulante la liberan spacon sur la Vindoza subdisko"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Italy"
+msgstr "Italio"
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (Kebeka)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "Nomo de printilo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "disable"
+msgstr "malebligu"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "eraro dum malmunti %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (broadcast)"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Kajmana Insularo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "primary"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekundoj"
+msgid "Select model manually"
+msgstr "Malproksima printilo"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Format"
+msgstr "Formatu"
+
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
+"La plej ofte uzata maniero por konekti per ADSL estas pppoe.\n"
+"Kelkaj konektoj uzas pptp, malmultaj uzas dhcp.\n"
+"Se vi ne scias, elektu 'uzu pppoe'"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Genera"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Various"
+msgstr "Diversaj"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr ""
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Konfiguru muson"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Montru informon"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albana"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Vidu hardvaran informon"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Litovio"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Detektado de fiksdisko(j)"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompakta"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Duobla surmetingo %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Mi detektis modelon: %s %s"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "A怒tomate esploru"
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Lokaj dosieroj"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/Helpo/_Pri..."
+#: ../../pkgs.pm:1
+#, c-format
+msgid "maybe"
+msgstr "elbe"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Raportu Cimo"
+msgid "Panama"
+msgstr "Panamo"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
+"Via grafika karto 艥ajnas havi TV-OUT-konektilon.\n"
+"臏i konfigureblas por funkcii uzante frame-buffer.\n"
+"\n"
+"Por tio vi devas konekti vian grafikan karton al via televidilo anta怒 ol "
+"startigi vian komputilon.\n"
+"Poste elektu la \"TVout\"-eniron en la startigilo\n"
+"\n"
+"膱u vi havas tiun konektilon?"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Elektu grafikan karton"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Ekrano"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Priskribo"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil koloroj (16 bitoj)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "膱esu"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Malproksima printilo"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Malproksima printilo"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Size: %d KB\n"
+msgstr "Grandeco: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Opcioj"
+msgid "Remove fonts on your system"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "X Fenestro 膲e komenco"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
+msgid "Please enter the directory to save:"
+msgstr "Bonvole, provu la muson"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ne estas sufi膲aj subdiskoj por RAID nivelo %d\n"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatas"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Jen la sekvantaj printvicoj.\n"
+"Vi povas aldoni pli a怒 艥an臐i la ekzistantajn."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "Connected"
+msgstr "Konektita"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr ""
+msgid "USB printer \\#%s"
+msgstr "USB-presilo \\#%s"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Reta Printilo (TCP/ingo)"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Macedonian"
+msgstr "Macedona"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr ""
+msgid "Bridges and system controllers"
+msgstr "Pont- kaj sistem-kontroliloj"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Nomo: "
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Dosiero/_Savu"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 butonoj"
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "Malio"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 butonoj"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "No details"
+msgstr "Neniaj detaloj"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "tre agrabla(j)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modulonomo"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Preview"
+msgstr "aparato"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Model"
-msgstr "Muso"
+msgid "Remote Control"
+msgstr "Malproksima printilo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Memoro de Karto (DMA)"
+msgid "Please select media for backup..."
+msgstr "Bonvole, elektu lingvon por uzi."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 servilo: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
+msgid "Allow Thin Clients"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "nivelo"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Kartvela (\"Rusa\" aran臐o)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Opcioj"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatu"
+msgid "Your printer model"
+msgstr "Malproksima printilo"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(AVERTO! Vi uzas XFS por via root-subdisko,\n"
+"krei startdisketon sur 1,44-mb-disketo ver艥ajne fiaskos,\n"
+"膲ar XFS bezonas tre grandan pelilon)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Stato:"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "艤argu la pelilojn por via usb-aparatoj."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Disk"
+msgstr "Disko"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "Printila Aparato URI"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Fdiv bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Israel"
+msgstr "Israelo"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "French Guiana"
+msgstr "Franca Gujano"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Muso"
+msgid "add a rule"
+msgstr "Aldonu modulon"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "A command line must be entered!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Prokura kluzaparato"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Elektu dosieron"
+msgid "Transfer printer configuration"
+msgstr "Interreta Konfigurado"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "膱u vi deziras starti vian konekta牡on je startado de la sistemo?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "%s (Port %s)"
+msgstr "%s (Pordo%s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Elektas sekurnivelon"
+msgid "Use network connection to backup"
+msgstr "Malbona rezerva dosiero"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Accept user"
+msgstr "Akceptu uzanto"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Server"
+msgstr "Servilo"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Malbona elekta牡o, provu denove\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Drive capacity"
+msgid "Heard and McDonald Islands"
+msgstr "Heard- kaj McDonald-Insuloj"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to expert mode"
+msgstr "艤an臐u al Spertula re臐imo"
+
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "grandeco de pecoj"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
+msgid "Looking at packages already installed..."
+msgstr "Rigardante jam instalitajn paka牡ojn..."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Pelilo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf aran臐os kelkfoje por fari diversajn taskojn\n"
+"dum starto por da怒rigi la sistem-konfigura牡on."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "A怒tentikigado"
+msgid "Printer on remote lpd server"
+msgstr "Malproksimaj lpd servilo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Bogomips"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+msgid "No mouse"
+msgstr "Neniu Muso"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Nuligu"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "Germanio"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
+msgid "Austria"
+msgstr "A怒strio"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bus"
-msgstr ""
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Rulu \"sndconfig\" post instalado por konfiguri vian sonkarton"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Maletendu Arbon"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Printas provpa臐o(j)n..."
+msgid "Auto Install Configurator"
+msgstr "Post-instala konfigurado"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
+msgid "Configure networking"
+msgstr "Konfiguru retumon"
-#: ../../standalone/keyboarddrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aran臐on."
+msgid "Where do you want to install the bootloader?"
+msgstr "Kie vi deziras instali la start艥argilon?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/livedrake:1
-#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"艤an臐u vian KDROM!\n"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
"\n"
-"Bonvole, en艥ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas 臐in, klaku \"Nuligu\" por eviti la instaladon de 膲i tiu KDROM."
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "艤an臐u KD-ROM-on"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "DHCP client"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Savu Kiel..."
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Bonvole provu denove"
+msgid "Restoring from file %s failed: %s"
+msgstr "Resta怒ris el dosiero %s malsukcesis: %s"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Interreta Konfigurado"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Lo臐iteka Muso (seria, malnova C7 speco)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "Formatas"
+msgid "New devfs device"
+msgstr "Prokura kluzaparato"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Printservilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS Servilo"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Datumbazoj"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS Servilo"
+msgid "Boot Style Configuration"
+msgstr "Post-instala konfigurado"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domajna nomo"
+msgid "Automatic time synchronization"
+msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Konfigura牡on"
-
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mail alert"
-msgstr ""
+msgid "Armenian (phonetic)"
+msgstr "Armena (fonetika)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
+msgid "Card model:"
+msgstr "Model de la karto:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Enhavoj de la dosiero"
+msgid "Thin Client"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Calendar"
-msgstr "Kalendaro"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "NIS Servilo"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose file"
-msgstr "Elektu dosieron"
+msgid "Turkmenistan"
+msgstr "Turkmenistano"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "sed ne konformanta(j)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Malproksima printilo"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "matching"
-msgstr "konformanta(j)"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Instalu sistemon"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Settings"
-msgstr "Konfigura牡oj"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ilo por vidi vian logdosieron"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "search"
-msgstr "ser膲u"
+msgid "Preparing installation"
+msgstr "Preparas instaladon"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Syslog"
-msgstr "sistema logdosiero (syslog)"
+msgid "Add User -->"
+msgstr "Aldonu uzanto"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "mesa臐oj"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nauru"
+msgstr "Nauro"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "User"
-msgstr "Salutnomo"
+msgid "True Type fonts installation"
+msgstr "Preparas instaladon"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Helpo/_Pri..."
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opcioj/Provu"
+msgid "LAN configuration"
+msgstr "LAN Konfigura牡o"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Dosiero/-"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Memoro de Karto (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Dosiero/Savu _Kiel"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Vi ne povas uzi LVM-logikan subdiskon por kro膲punkto %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Get Windows Fonts"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Dosiero/_Savu"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Iranian"
+msgstr "Irana"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Dosiero/_Malfermu"
+msgid "Croatia"
+msgstr "Kroatio"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "<control>N"
-msgstr "<stir>N"
+msgid "Gateway:"
+msgstr "Kluzo:"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_New"
-msgstr "/Dosiero/_Nova"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Aldonu uzanto"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "Montru nur por 膲i tiu tago"
+msgid "Remote printer name"
+msgstr "Malproksima printilo"
-#: ../../standalone/mousedrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Emulate third button?"
-msgstr "膱u vi deziras emuli trian musbutonon?"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Bonvole, elektu la specon de via muso."
+msgid "Device: "
+msgstr "Aparato: "
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konektu"
+msgid "Printerdrake"
+msgstr "Printilo"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr "Licenca kontrakto"
+
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Malkonektu"
+msgid "System Options"
+msgstr "Modulaj opcioj:"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Elektu sekurnivelon?"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "received"
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid ", USB printer"
+msgstr ", USB-printilo"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Choose the applications that will support the fonts:"
+msgstr "Elektu la subdiskoj kiuj vi deziras formati"
+
+#: ../../steps.pm:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Configure X"
+msgstr "Konfiguru X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "sent: "
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turka (tradicia \"F\" modelo)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Lokaj dosieroj"
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Congratulations!"
+msgstr "Gratulojn!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "average"
+msgid "Use owner id for execution"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Interreta Konfigurado"
+msgid "Down"
+msgstr "Finata"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Speco de konekto"
-
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "Install rpm"
+msgstr "Instalu rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Konektu al la Interreto"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Tempo restanta "
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Konektu al la Interreto"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "UK keyboard"
+msgstr "Unui臐inta Regna klavaro"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konfiguru interretan konekta牡on"
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "Malmuntu"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Logs"
+msgid "Uninstall Fonts"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Speco de konekto"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft Explorer"
+msgstr "Mikrosofta Esplorilo"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid "German (no dead keys)"
+msgstr "Germana (neniom da mortaj klavoj)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Konservu en dosiero"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil koloroj (15 bitoj)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Statistics"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
+"Vi povas eksporti uzante NFS a怒 Samba. Bonvole elektu kiun vi 艥atus uzi."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "muntado malsukcesis: "
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Reboot"
+msgstr "Restarto"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Reta Konfigura牡o"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Gambio"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Loka printilo"
+msgid "Mandrake Control Center"
+msgstr "Konekti al la interreto"
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Name/IP address of host:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Elektu grafikan karton"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Loka printilo"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "konformanta(j)"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Aldonu uzanto"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Uzu liberan spacon"
+msgid "Remember this password"
+msgstr "Neniu pasvorto"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Malproksima printilo"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+msgid "Use the free space on the Windows partition"
+msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Printilo"
+msgid "%s found on %s, configure it automatically?"
+msgstr "膱u vi deziras konfiguri printilon?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 pelilo: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Loka printilo"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Loka printilo"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Printilo"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Elektu la paka牡ojn kiuj vi deziras instali"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "Papuo-Nov-Gvineo"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Loka printilo"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Serba (cirila)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"膱u vi deziras konfiguri tiun 膲i presilon (\"%s\")\n"
+"kiel defa怒ltan presilon?"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Starta aparato"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Loka printilo"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "Kreas startdisketon"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Malproksima printilo"
+msgid "Wait please, testing your connection..."
+msgstr "Konfiguru interretan konekta牡on"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "Haltas de la reto"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Salutnomo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
+"膱i tiu servo provizas NFS dosier艥losado."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is unsupported"
+msgid "DHCP Client"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "dismiss"
+msgstr "forsendu"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr ""
+msgid "Printing/Scanning on \"%s\""
+msgstr "Presanta/skananta per \"%s\""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Pordo"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit raid modules"
+msgstr "forlasu RAID-ajn modulojn"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid ", "
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd estas la printvica dajmono bezonata por lpr ta怒ge funkcii. 臏i estas\n"
+"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Duobla surmetingo %s"
+msgid "Internet Connection Configuration"
+msgstr "Interreta konekta牡o kaj konfiguro"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid " ("
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Elektu grafikan karton"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "膱u vi deziras konfiguri printilon?"
-
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Duobla surmetingo %s"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Via komputilo ne havas retadaptilon!"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "膱u vi vere deziras forigi la presilon \"%s\"?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "I can't find any room for installing"
+msgstr "Mi ne trovas spacon por instali"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Loka printilo"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Modify RAID"
+msgstr "艤an臐u RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon. Bonvole "
+"elektu\n"
+"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-#: ../../share/advertising/02-community.pl:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Add user"
+msgstr "Aldonu uzanto"
-#: ../../share/advertising/02-community.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Liberia"
+msgstr "Liberio"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Elektu vian klavaron"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Format partitions"
+msgstr "Formatu subdiskojn"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Post-instala konfigurado"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Legas datumbason de CUPS peliloj..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Interreta Konfigurado"
+msgid "Scanner sharing to hosts: "
+msgstr "Printilo"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Retrokonekta dosieronomo: %s"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Prokrastoperiodo anta怒 starti defa怒ltan sistemon"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
+"Tiu 膲i programo estas libera softvaro; vi povas redisdoni 臐in kaj/a怒 modifi\n"
+"臐in sub la termoj de la GNU-臏eneralpublika Licenco kiel publikigita de\n"
+"la Libera Programar Fonda牡o (Free Software Foundation); a怒 versio 2, a怒\n"
+"la怒 via opcio) pli posta versio.\n"
+"\n"
+"Tiu 膲i programo estas disdonata kun la espero ke 臐i estu utila,\n"
+"sed SEN IA GARANTIO; e膲 sen garantio pri MERKATOTAUXGECO a怒\n"
+"TAUXGECO POR APARTA CELO. Vidu la\n"
+"GNU 臏eneralpublikan Licencon pri pli da detaloj.\n"
+"\n"
+"Vi devus esti ricevinta kopion de la GNU 臏eneralpublika Licenco\n"
+"kun tiu 膲i programo; se ne, skribu al la Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Bonvolu klaki sur subdiskon"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Salutnomo"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Malbona rezerva dosiero"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Configure"
+msgstr "Konfiguru"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Elektu grafikan karton"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Bonvole enigu vian po艥tejon.\n"
+"Via po艥tejo devus esti plene specifita po艥tejo,\n"
+"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
+"Vi anka怒 povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Elektu Printilan Konekton"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Kreu novan subdiskon"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Loka printilo"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Iuj gravaj paka牡oj ne estis ta怒ge instalata.\n"
+"A怒 via KDROM drajvo a怒 via KDROM disko estas difektita.\n"
+"Kontrolu la KDROM sur instalata komputilo per\n"
+"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Duobla surmetingo %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "Azerbaj臐ano"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak-a (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Kiel estas la printilo konektata?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Spertulo"
+msgid "Security level"
+msgstr "Elektas sekurnivelon"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Distingivo"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Servoj"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Spertulo"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
#, fuzzy
@@ -17215,10 +17268,6 @@ msgid ""
msgstr ""
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
#, fuzzy
msgid "Game station"
msgstr "Dokumentaro"
@@ -17294,10 +17343,6 @@ msgid ""
msgstr ""
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnoma Laborstacio"
@@ -17316,11 +17361,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""
#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "Programisto"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj 膲apdosieroj"
@@ -17394,36 +17434,64 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""
#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Audio station"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
+msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
-#: ../../share/compssUsers:999
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Interreta konekta牡o kaj konfiguro"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Konfiguru la konekton"
+
+#~ msgid "Disconnect"
+#~ msgstr "Malkonektu"
+
+#~ msgid "Connect"
+#~ msgstr "Konektu"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Vi povas rekonfiguri vian konekton."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Vi povas konekti al interreto a怒 rekonfiguri vian konekton."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Vi estas nun ne konektita kun interreto."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Vi estas nun konektita al Interreto."
+
#, fuzzy
-msgid "Video station"
-msgstr "Dokumentaro"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr ""
+#, fuzzy
+#~ msgid "Author:"
+#~ msgstr "A怒tomate esploru"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Dokumentaro"
+#~ msgid "Audio station"
+#~ msgstr "Plurmedia - Sono"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Grafika karto: %s"
+#~ msgid "Video station"
+#~ msgstr "Dokumentaro"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Dokumentaro"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafika karto: %s"
#~ msgid "no network card found"
#~ msgstr "neniu retkarto trovita"
@@ -17553,10 +17621,6 @@ msgstr ""
#~ "/boot."
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "臏isdatigu"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "膱u vi deziras provi la konfigura牡on?"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
index 43d4f83cd..2b1e2bf62 100644
--- a/perl-install/share/po/es.po
+++ b/perl-install/share/po/es.po
@@ -7,7 +7,7 @@
msgid ""
msgstr ""
"Project-Id-Version: es\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2003-03-13 06:39-0300\n"
"Last-Translator: Fabian Mandelbaum <fmandelbaum@hotmail.com>\n"
"Language-Team: Espa帽ol <es@li.org>\n"
@@ -16,966 +16,1928 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Rastreando las particiones para encontrar los puntos de montaje"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"si se pone en s铆, verificar adiciones/remociones de archivos suid root."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "puerto de impresora de red"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Por favor, inserte un disquete:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"La compartici贸n por usuario utiliza el grupo \"fileshare\". \n"
-"Puede utilizar UserDrake para a帽adir un usuario a este grupo."
+"La tabla de particiones de respaldo no tiene\n"
+"el mismo tama帽o. 驴Desea continuar de todas formas?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Which username"
+msgstr "Qu茅 nombre de usuario"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Lanzar UserDrake"
+msgid "Which type of entry do you want to add?"
+msgstr "驴Qu茅 tipo de entrada desea a帽adir?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Restaurar la tabla de particiones"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "En servidor CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Configuraci贸n posterior a la instalaci贸n"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Use \"%s\" en su lugar"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tipo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"驴Desea permitir a los usuarios exportar algunos directorios personales?\n"
-"Si lo hace, los usuarios podr谩n simplemente hacer clic sobre \"Compartir\" "
-"en Konqueror y Nautilus.\n"
"\n"
-"\"Personalizar\" permite una granularidad por usuario.\n"
+"Tampoco se pueden transferir las impresoras configuradas con los archivos "
+"PPD provistos por sus fabricantes o con controladores CUPS nativos."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Falta el paquete obligatorio %s"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Puede exportar usando NFS o Samba. 驴Cu谩l elige"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Las siguientes impresoras\n"
+"\n"
+"%s%s\n"
+"est谩n conectadas directamente a su sistema"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Se necesita instalar el paquete %s. 驴Quiere instalarlo?"
+msgid "Central African Republic"
+msgstr "Rep煤blica Centroafricana"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Personalizada"
+msgid "Gateway device"
+msgstr "Dispositivo de pasarela de red"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Permitir a todos los usuarios"
+msgid "Net Method:"
+msgstr "M茅todo de red:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "No compartir"
+msgid "Ethernetcard"
+msgstr "Tarjeta Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "M谩s"
+msgid "Parameters"
+msgstr "Par谩metros"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Aqu铆 tiene la lista completa de pa铆ses disponibles"
+msgid "Auto-detect"
+msgstr "Detecci贸n autom谩tica"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Seleccione su pa铆s, por favor."
+msgid "Interface:"
+msgstr "Interfaz:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid " / Region"
-msgstr " / Regi贸n"
+msgid "Select installation class"
+msgstr "Tipo de instalaci贸n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Pa铆s"
+msgid "on CDROM"
+msgstr "en CDROM"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Todos los idiomas"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"El sistema no parece estar conectado a la Internet.\n"
+"Intente volver a configurar su conexi贸n."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Usar Unicode predeterminadamente"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Conecte su impresora a un servidor Linux y permita que su(s) m谩quina(s) "
+"Windows se conecten al mismo como un cliente.\n"
+"\n"
+"驴Realmente desea continuar configurando esta impresora como lo est谩 haciendo?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Bielorrusia"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Error al escribir en el archivo %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux puede soportar m煤ltiples idiomas. Seleccione\n"
-"los que desea instalar. Los mismos estar谩n disponibles cuando\n"
-"su instalaci贸n est茅 completa y Usted reinicie su sistema."
+"apmd se usa para monitorizar el estado de las bater铆as y enviar esa\n"
+"informaci贸n a syslogd. Tambi茅n puede usarse para apagar el equipo cuando\n"
+"la bater铆a est谩 casi descargada."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Por favor, elija el idioma a usar."
+msgid "Use tape to backup"
+msgstr "Usar cinta para realizar respaldo"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Elija el gestor de ventanas a ejecutar:"
+msgid "The following packages are going to be installed"
+msgstr "Se van a instalar los siguientes paquetes"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Elija el usuario predeterminado:"
+msgid "CUPS configuration"
+msgstr "Configuraci贸n de CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "驴Desea usar esta caracter铆stica?"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Puedo configurar su computadora para que entre autom谩ticamente con un "
-"usuario."
+msgid "Not enough free space to allocate new partitions"
+msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Conexi贸n autom谩tica"
+msgid "Moving"
+msgstr "Desplazando"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Icono"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Actividades de Drakbackup por medio de %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Contrase帽a (de nuevo)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Bienvenido al asistente para la configuraci贸n de la red\n"
+"\n"
+"Estamos a punto de configurar su conexi贸n de red/Internet.\n"
+"Si no desea usar la detecci贸n autom谩tica, desmarque la casilla.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Contrase帽a"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Nombre del usuario"
+msgid "Lebanon"
+msgstr "L铆bano"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Nombre y apellidos"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Aceptar el usuario"
+msgid "Stop"
+msgstr "Parar"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Hecho"
+msgid "Edit selected host"
+msgstr "Editar host seleccionado"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduzca un usuario\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "隆No se defini贸 dispositivo de CD!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "A帽adir un usuario"
+msgid "Bulgarian (phonetic)"
+msgstr "B煤lgaro (fon茅tico)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Este nombre de usuario ya fue a帽adido"
+msgid "The DHCP start ip"
+msgstr "Primera IP del rango de DHCP"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "El nombre de usuario es muy largo"
+msgid "256 kB"
+msgstr "256 KB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Opciones principales del cargador de arranque"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"El nombre de usuario (login) s贸lo debe contener letras, n煤meros, `-' y `_'"
+"[--manual] [--device=disp.] [--update-sane=dir_fuente_sane] [--update-"
+"usbtable] [--dynamic=disp.]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Introduzca el nombre de usuario"
+msgid "Tape"
+msgstr "Cinta"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Esta contrase帽a es demasiado sencilla"
+msgid "Scanning network..."
+msgstr "Buscando en la red ..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Vuelva a intentarlo, por favor"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Con esta opci贸n podr谩 restaurar cualquier versi贸n de su\n"
+"directorio /etc."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Las contrase帽as no coinciden"
+msgid "Malaysia"
+msgstr "Malasia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(%s ya fue a帽adido)"
+msgid "Swiss (French layout)"
+msgstr "Suizo (franc茅s)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "acceso a herramientas de compilaci贸n"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "Fall贸 mkraid (驴quiz谩s no est茅n las herramientas de raid (raidtools)?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "acceso a herramientas de red"
+msgid "Webcam"
+msgstr "C谩mara web"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Tama帽o del cach茅 del CPU (de 2do nivel)"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "acceso a archivos administrativos"
+msgid "Soundcard"
+msgstr "Tarjeta de sonido"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "permitir \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Para imprimir un archivo desde la l铆nea de comando (ventana de terminal) use "
+"el comando \"%s <archivo>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "acceso a herramientas rpm"
+msgid "Level %s\n"
+msgstr "Nivel %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "acceso a programas X"
+msgid "Luxembourg"
+msgstr "Luxemburgo"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Aqu铆 est谩n las diferentes entradas.\n"
-"Puede a帽adir otras o cambiar las que ya existen."
+"\n"
+" Reporte del servidor DrakBackup\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Otro SO (Windows...)"
+msgid "Iran"
+msgstr "Ir谩n"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Otro SO (MacOS...)"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Otro SO (SunOS...)"
+msgid "Iraq"
+msgstr "Iraq"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"隆Se encontr贸 un conflicto potencial de direcciones LAN en la configuraci贸n "
+"de %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "驴Qu茅 tipo de entrada desea a帽adir?"
+msgid "Configuring..."
+msgstr "Configurando..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Esta etiqueta ya est谩 en uso"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "La configuraci贸n ya se ha hecho, y ahora est谩 activada."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Debe especificar una partici贸n ra铆z"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"El m贸dulo bttv del n煤cleo GNU/Linux simplemente detecta autom谩ticamente los "
+"par谩metros correctos para la mayor铆a de las tarjetas de TV modernas.\n"
+"Si no se detecta correctamente la suya, aqu铆 puede forzar los tipos de "
+"tarjeta y sintonizador adecuados. Simplemente seleccione los par谩metros de "
+"su tarjeta de TV si lo necesita."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Debe especificar una imagen del n煤cleo"
+msgid "Password (again)"
+msgstr "Contrase帽a (de nuevo)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "No se admite una etiqueta vac铆a"
+msgid "Search installed fonts"
+msgstr "Buscar tipograf铆as instaladas"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Por defecto"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "Sin v铆deo"
+msgid "IP address"
+msgstr "Direcci贸n IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Tama帽o de initrd"
+msgid "Choose the sizes"
+msgstr "Elija los tama帽os"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "A帽adir"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Lista de datos corruptos:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiqueta"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"El sistema no soporta a su m贸dem.\n"
+"Eche un vistazo en http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Inseguro"
+msgid "Choose another partition"
+msgstr "Elija otra partici贸n"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Tabla"
+msgid "Current user"
+msgstr "Usuario corriente"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Ra铆z"
+msgid "Username"
+msgstr "Nombre de usuario"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lectura/Escritura"
+msgid "Left \"Windows\" key"
+msgstr "Tecla \"Windows\" de la izquierda"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "Configuraci贸n del servidor dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Modo de v铆deo"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Usado para directorio:\n"
+" s贸lo el due帽o del directorio o archivo en este directorio lo puede borrar"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Imagen"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "驴SO predeterminado?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " en servidor Novell \"%s\", impresora \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "驴Habilitar el arranque de OF?"
+msgid "Remove a module"
+msgstr "Quitar un m贸dulo"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "驴Habilitar el arranque desde CD?"
+msgid "Password"
+msgstr "Contrase帽a"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Tiempo de espera de arranque del n煤cleo"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumentos: (max, inactive=-1)\n"
+"\n"
+"Configurar edad de contrase帽as en \\fImax\\fP d铆as y demorar el cambio a "
+"\\fIinactive\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Demora de Open firmware"
+msgid "Advanced Configuration"
+msgstr "Configuraci贸n avanzada"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
+msgid "Scanning on your HP multi-function device"
+msgstr "Escaneo en su dispositivo multifunci贸n HP"
#: ../../any.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Mensaje de inicio"
+msgid "Root"
+msgstr "Ra铆z"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Cargador de arranque a usar"
+msgid "Choose an existing RAID to add to"
+msgstr "Elegir un RAID existente al que a帽adir"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Opciones principales del cargador de arranque"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turco (modelo \"Q\" moderno)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "no se encuentra el mensaje de LiLo"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"La opci贸n \"Restringir las opciones de la l铆nea de comandos\"\n"
-"no tiene sentido sin contrase帽a"
+"Regeneraci贸n autom谩tica de la cabecera del n煤cleo en /boot para\n"
+"/usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Proporcione el tama帽o de la RAM en MB"
+msgid "if needed"
+msgstr "si es necesario"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Activar perfiles m煤ltiples"
+msgid "Restore Failed..."
+msgstr "Fall贸 la restauraci贸n..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precise el tama帽o de la RAM si es necesario (se encontraron %d MB)"
+msgid "/Autodetect _jazz drives"
+msgstr "/Autodetectar unidades _jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Limpiar /tmp en cada inicio del equipo"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Descripci贸n:\n"
+"\n"
+" Drakbackup se usa para respaldar su sistema.\n"
+" Durante la configuraci贸n puede seleccionar:\n"
+"\t- Archivos del sistema,\n"
+"\t- Archivos de usuarios,\n"
+"\t- Otros archivos.\n"
+"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
+"\n"
+" Drakbackup le permite respaldar su sistema sobre:\n"
+"\t- Disco r铆gido.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.)\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Cinta.\n"
+"\n"
+" Drakbackup le permite restaurar su sistema a un\n"
+" directorio seleccionado por el usuario.\n"
+"\n"
+" Predeterminadamente se almacenar谩n todos los respaldos en\n"
+" su directorio /var/lib/drakbackup.\n"
+"\n"
+" Archivo de configuraci贸n:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Paso de restauraci贸n:\n"
+" \n"
+" Durante la restauraci贸n, DrakBackup quitar谩 su \n"
+" directorio original y verificar谩 que todos \n"
+" los archivos de respaldo no est茅n corruptos. Se \n"
+" recomienda que haga un 煤ltimo respaldo antes de restaurar.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Crear un disco de arranque"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"EL PRESENTE TEXTO ES UNA TRADUCCI脫N A PROP脫SITO EXCLUSIVAMENTE\n"
+"INFORMATIVO DE LOS T脡RMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
+"NING脷N CASO LA PRESENTE TRADUCCI脫N TIENE VALOR LEGAL SIENDO OFICIAL\n"
+"EXCLUSIVAMENTE LA VERSI脫N EN FRANC脡S DE LA LICENCIA DE LINUX-MANDRAKE.\n"
+"No obstante, esperamos que esta traducci贸n ayudar谩 a los que hablan\n"
+"castellano a entenderla mejor.\n"
+"\n"
+"\n"
+"Introducci贸n\n"
+"\n"
+"El conjunto de elementos que incluye el sistema operativo y los\n"
+"diferentes componentes disponibles en la distribuci贸n Mandrake Linux\n"
+"se denominar谩n en adelante \"Programas\". Los programas incluyen en\n"
+"particular, pero de manera no limitativa, el conjunto de programas,\n"
+"procedimientos, reglas y documentaciones relativas al sistema\n"
+"operativo y a los diferentes componentes de la distribuci贸n\n"
+"Mandrake Linux.\n"
+"\n"
+"\n"
+"1. Licencia\n"
+"\n"
+"Le rogamos leer cuidadosamente este documento. 脡ste constituye un\n"
+"contrato de licencia entre Ud. (persona f铆sica o persona moral) y\n"
+"MandrakeSoft S.A. aplicado a los programas. El hecho de instalar, \n"
+"duplicar o usar los programas de cualquier manera, indica\n"
+"que acepta expl铆citamente los t茅rminos y condiciones de esta licencia\n"
+"y que est谩 totalmente de acuerdo en lo referente a los t茅rminos de la "
+"misma.\n"
+"En caso de no estar de acuerdo con el presente documento, no est谩\n"
+"autorizado a instalar, duplicar ni usar de ninguna manera\n"
+"este producto. El contrato de licencia sera autom谩ticamente anulado\n"
+"sin aviso previo en el caso que no se cumplan las disposiciones\n"
+"de este documento. En caso de anulaci贸n Ud. tendr谩 que anular\n"
+"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
+"y de todas las documentaciones que constituyen el sistema operativo y\n"
+"los diferentes componentes disponibles en en la distribuci贸n\n"
+"Mandrake Linux.\n"
+"\n"
+"\n"
+"2. Garant铆a y limitaciones de garant铆a\n"
+"\n"
+"Los programas y la documentaci贸n que los acompa帽a son proporcionados\n"
+"tal cual y sin ninguna garant铆a. MandrakeSoft S.A.\n"
+"no se responsabiliza de las consecuencias de un da帽o directo,\n"
+"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
+"relaci贸n con la utilizaci贸n de los programas, en particular y de\n"
+"manera no limitada, todos da帽os resultados por perdidas de\n"
+"beneficio, interrupci贸n de actividad, p茅rdida de informaciones\n"
+"comerciales u otras perdidas financieras, as铆 que por eventuales\n"
+"condenaciones e indemnizaciones debidas como consecuencia de una decisi贸n "
+"de\n"
+"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
+"la\n"
+"aparici贸n o eventualidad de tales da帽os.\n"
+"\n"
+"ADVERTENCIA EN CUANTO A LA POSESI脫N O USO DE PROGRAMAS PROHIBIDOS\n"
+"EN CIERTOS PA脥SES\n"
+"\n"
+"En ning煤n caso, ni MandrakeSoft S.A. ni sus proveedores podr谩n ser\n"
+"responsabilizados por un perjuicio especial, directo, indirecto o\n"
+"accesorio, de cualquier naturaleza (en particular y de manera\n"
+"no limitada, p茅rdidas de beneficio, interrupci贸n de actividad,\n"
+"p茅rdida de informaciones comerciales u otras p茅rdidas financieras, as铆\n"
+"como por posibles condenaciones e indemnizaciones debidas\n"
+"consecuentes a una decisi贸n de justicia) que resultar铆a de la\n"
+"utilizaci贸n, detenci贸n o simple descarga desde uno de los sitios de\n"
+"transferencia de Mandrake Linux de programas prohibidos por la\n"
+"legislaci贸n a la que est谩 sometido. Esta advertencia se aplica en\n"
+"particular a algunos componentes de criptograf铆a fuerte inclu铆dos en los\n"
+"programas.\n"
+"\n"
+"\n"
+"3. Licencia GPL y otras licencias\n"
+"\n"
+"Los Programas est谩n constituidos por m贸dulos de programas creados por\n"
+"diversas personas (f铆sicas o legales). Muchos de ellos se\n"
+"distribuyen bajo los t茅rminos de la Licencia P煤blica General GNU\n"
+"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
+"mayor铆a\n"
+"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
+"m贸dulos de los programas que cubren. Haga el favor de leer y de aceptar los "
+"t茅rminos y\n"
+"condiciones de las licencias que acompa帽an a cada uno de ellos antes de\n"
+"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
+"(o su representante) de dicho programa, y no a MandrakeSoft. Los\n"
+"programas desarrollados por MandrakeSoft est谩n sometidos a la licencia\n"
+"GPL. La documentaci贸n escrita por MandrakeSoft esta sometida a una\n"
+"licencia especifica. Haga el favor de dirigirse a la documentaci贸n para\n"
+"obtener m谩s informaci贸n.\n"
+"\n"
+"\n"
+"4. Propiedad intelectual\n"
+"\n"
+"Todos los derechos, t铆tulos e intereses de los diferentes programas\n"
+"son propiedad exclusiva de sus autores respectivos y est谩n protegidos\n"
+"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
+"derechos de los programas. Las marcas \"Mandrake\" y \"Mandrake Linux\" "
+"as铆\n"
+"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. Disposiciones diversas\n"
+" \n"
+"Si alguna disposici贸n de este contrato de licencia fuera declarada\n"
+"nula, ilegal o inaplicable por un tribunal competente, esta\n"
+"disposici贸n ser铆a excluida del presente contrato. Sin embargo\n"
+"Ud. seguir谩 sometido a las otras disposiciones, que tendr谩n\n"
+"plenos efectos. El contrato de licencia est谩 regido por las leyes\n"
+"francesas. Toda disputa relativa a los presentes t茅rminos ser谩\n"
+"resuelta, preferentemente, por v铆a amigable. En caso de desacuerdo con\n"
+"MandrakeSoft S.A., el litigio ser谩 tramitado a los tribunales\n"
+"competentes de Par铆s, Francia. Para cualquier pregunta relacionada con\n"
+"este documento, por favor, p贸ngase en contacto con MandrakeSoft S.A.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "restrict"
-msgstr "restringir"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"coordenada x del 谩ngulo superior\n"
+"izquierdo de la barra de progreso"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Restringir las opciones de la l铆nea de comandos"
+msgid "Current interface configuration"
+msgstr "Configuraci贸n corriente de la interfaz"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon (Demonio de impresora de l铆neas)"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Si tiene una tarjeta ISA, los valores de la pr贸xima pantalla deber铆an ser "
+"correctos.\n"
+"\n"
+"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "No imprimir ninguna p谩gina de prueba"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Indio (Gurmukhi)"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Forzar sin APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Habilitar ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Esta contrase帽a es demasiado simple\n"
+"(tiene que tener por lo menos una longitud de %d caracteres)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Demora antes de arrancar la imagen predeterminada"
+msgid "[keyboard]"
+msgstr "[teclado]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "compacto"
+msgid "FTP proxy"
+msgstr "Proxy FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Compact"
-msgstr "Compacto"
+msgid "Install List"
+msgstr "Instalar lista"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instalaci贸n del cargador de arranque"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Cambiar la\n"
+"ruta de restauraci贸n"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partici贸n de arranque"
+msgid "Show only for the selected day"
+msgstr "Mostrar s贸lo para el d铆a seleccionado"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector del disco (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"Generalidades de drakTermServ\n"
+"\t\t\t\n"
+" - Crear im谩genes de arranque con Etherboot habilitado:\n"
+" \t\tPara arrancar un n煤celo por Etherboot, se debe crear una imagen de "
+"arranque initrd/n煤cleo especial\n"
+" \t\tmkinitrd-net hace mucho de esto y drakTermServ s贸lo es una "
+"interfaz gr谩fica\n"
+" \t\tpara ayudar a administrar/personalizar estas im谩genes.\n"
+"\n"
+" - Mantener /etc/dhcp.conf:\n"
+" \t\tPara arrancar los clientes desde la red, cada cliente necesita una "
+"entrada dhcpd.conf asignando una direcci贸n IP\n"
+" \t\ty las im谩genes de arranque para la m谩quina. drakTermServ ayuda a "
+"crear/quitar estas entradas.\n"
+"\t\t\t\n"
+" \t\t(Las tarjetas PCI pueden omitir la imagen - etherboot pedir谩 la "
+"imagen correcta. Tambi茅n\n"
+" \t\tdeber铆a considerar que cuando etherboot busca las im谩genes, espera "
+"nombres como\n"
+" \t\tboot-3c59x.nbi, en vez de boot-3c59x.2.4.19-16mdk.nbi)\n"
+"\t\t\t\n"
+" \t\tUna entrada t铆pica de dhcpd.conf para soportar un cliente sin "
+"disco luce as铆:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\thardware ethernet\t00:20:af:2f:7f:9d;\n"
+"\t\t\t\tfixed address\t\t192.168.192.3;\n"
+"\t\t\t\t/*type\t\t\tfat;*/\n"
+"\t\t\t\tfilename\t\t\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tSi bien puede utilizar una cantidad de direcciones IP, en vez de "
+"configurar una entrada\n"
+"\t\t\tespec铆fica para cada cliente, usar un esquema de direcciones fijas "
+"facilita el uso\n"
+"\t\t\tde la funcionalidad de archivos de configuraci贸n espec铆ficos para los "
+"clientes\n"
+"\t\t\tque brinda ClusterNFS.\n"
+"\t\t\t\n"
+"\t\t\tNota: La entrada \"/*type\" s贸lo la utiliza drakTermServ. Los "
+"clientes pueden ser \"thin\"*/\n"
+"\t\t\to 'fat'. Los clientes livianos corren la mayor铆a del software en el "
+"servidor por medio de xdmcp, mientras que los clientes pesados corren la "
+"mayor铆a\n"
+"\t\t\tdel software en la m谩quina cliente. Un inittab especial, /etc/inittab\\"
+"$\\$IP=client_ip\\$\\$ se\n"
+"\t\t\tescribe para los clientes livianos. Los archivos de configuraci贸n del "
+"sistema xdm-config, kdmrc, y gdm.conf se modifican\n"
+"\t\t\tsi se utilizan clientes livianos, para habilitar xdmcp. Debido a que "
+"hay problemas de seguridad al utilizar xdmcp,\n"
+"\t\t\thosts.deny y hosts.allow se modifican para limitar el acceso a la "
+"subred local.\n"
+"\t\t\t\n"
+"\t\t\tNota: Debe detener/iniciar el servidor luego de a帽adir o cambiar "
+"clientes.\n"
+"\t\t\t\n"
+" - Maintener /etc/exports:\n"
+" \t\tClusternfs permite exportar la ra铆z del sistema de archivos a "
+"los clientes sin disco. drakTermServ\n"
+" \t\tconfigura la entrada correcta para permitir acceso an贸nimo al "
+"sistema de archivos ra铆z desde\n"
+" \t\tlos clientes sin disco.\n"
+"\n"
+" \t\tUna entrada exports t铆pica para clusternfs es:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBRED/M脕SCARA(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tDonde SUBRED/M脕SCARA est谩n definidas por su red.\n"
+" \t\t\n"
+" - Maintener /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tPara que los usuarios puedan conectarse al sistema desde un "
+"cliente sin disco, la entrada en\n"
+" \t\t/etc/shadow debe duplicarse en /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ ayuda\n"
+" \t\ten este aspecto a帽adiendo o quitando usuarios del sistema de "
+"este archivo.\n"
+"\n"
+" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ por cliente:\n"
+" \t\tA trav茅s de clusternfs, cada cliente sin disco puede tener sus "
+"archivos de configuraci贸n 煤nicos\n"
+" \t\ten el sist. de archivos ra铆z del servidor. En el futuro "
+"drakTermServ ayudar谩 a crear\n"
+" \t\testos archivos.\n"
+"\n"
+" - Archivos de configuraci贸n del sistema por cliente:\n"
+" \t\tA trav茅s de clusternfs, cada cliente sin disco puede tener sus "
+"archivos de configuraci贸n 煤nicos\n"
+" \t\ten el sist. de archivos ra铆z del servidor. En el futuro "
+"drakTermServ ayudar谩 a crear archivos\n"
+" \t\tcomo /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard sobre una base\n"
+" \t\tpor cliente.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ configurar谩 este archivo para trabajar en conjunto "
+"con las im谩genes creadas\n"
+" \t\tpor mkinitrd-net, y las entradas en /etc/dhcpd.conf, para servir "
+"la imagen de arranque\n"
+" \t\ta cada cliente sin disco.\n"
+"\n"
+" \t\tUn archivo de configuraci贸n t铆pico de tftp luce as铆:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tAqu铆 los cambios con respecto a lo predeterminado son cambiar el "
+"flag disable a\n"
+" \t\t'no' y cambiar la ruta del directorio a /var/lib/tftpboot, donde "
+"mkinitrd-net\n"
+" \t\tpone sus im谩genes.\n"
+"\n"
+" - Crear disquetes/CDs Etherboot:\n"
+" \t\tLas m谩quinas sin disco necesitan o bien im谩genes ROM en las NIC, "
+"o un disquete o\n"
+" \t\tCD de arranque para iniciar la secuencia de arranque. "
+"drakTermServ ayudar谩 a generar estas,\n"
+" \t\tbasadas en la NIC en la m谩quina cliente.\n"
+" \t\t\n"
+" \t\tUn ejemplo b谩sico para crear un disquete de arranque para una "
+"3Com 3c509 manualmente:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
+"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "驴D贸nde quiere instalar el cargador de arranque?"
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instalaci贸n de LILO/grub"
+msgid "Logs"
+msgstr "Registros"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Instalaci贸n de SILO"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Nota: no se pueden detectar autom谩ticamente los puertos paralelo)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Omitir"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "En disquete"
+msgid "What kind of card do you have?"
+msgstr "驴Qu茅 tipo de tarjeta tiene?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Primer sector de la partici贸n ra铆z"
+msgid "<control>O"
+msgstr "<control>A"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Seguridad"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Decidi贸 instalar el cargador de arranque en una partici贸n.\n"
-"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
-"arranca (ej.: System Commander).\n"
-"\n"
-"驴Desde qu茅 disco arranca?"
+"Tambi茅n puede utilizar el interfaz gr谩fico \"xpdq\" para configurar las "
+"opciones y manipular los trabajos de impresi贸n.\n"
+"Si est谩 usando KDE como entorno de escritorio tiene un \"bot贸n de p谩nico\", "
+"un icono en su escritorio etiquetado como \"隆DETENER impresora!\", que "
+"detiene todos los trabajos de impresi贸n inmediatamente cuando hace clic en "
+"茅l. Esto es 煤til, por ejemplo, para atascos de papel.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Creando el disquete de arranque"
+msgid "<control>Q"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserte un disquete en %s"
+msgid "Unknown"
+msgstr "Desconocido"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Este servidor ya est谩 en la lista, no se puede volver a a帽adir.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Segunda disquetera"
+msgid "Network Configuration"
+msgstr "Configuraci贸n de la red"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First floppy drive"
-msgstr "Primera disquetera"
+msgid "<control>S"
+msgstr "<control>G"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Disculpe, pero no hay ninguna disquetera disponible"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protocolo para el resto del mundo \n"
+" sin canal D (l铆neas alquiladas)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "隆La opci贸n %s debe ser un n煤mero!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Nota"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"煤til\n"
-"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
-"sistema operativo borra\n"
-"LILO, o si LILO no funciona con su configuraci贸n de hardware. Un disquete\n"
-"de arranque personalizado tambi茅n se puede usar con la imagen de rescate de\n"
-"Mandrake haciendo as铆 mucho m谩s f谩cil la recuperaci贸n en caso de fallo\n"
-"grave del sistema. 驴Desea crear un disquete de arranque para su sistema?\n"
-"%s"
+"Argumentos: (arg)\n"
+"\n"
+"Activar/desactivar verificaciones diarias de seguridad."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/deshabilitar crontab y at para usuarios. Poner los permitidos en /"
+"etc/cron y /etc/at.allow\n"
+"(ver man at(1) y crontab(1))."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "No ha configurado a X 驴Est谩 seguro que realmente desea esto?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"La configuraci贸n de la impresora se har谩 de forma totalmente automatizada. "
+"Si su impresora no se detect贸 correctamente o si prefiere una configuraci贸n "
+"personalizada, active la \"Configuraci贸n manual\"."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "驴Qu茅 tipo de particionamiento?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+"lista de archivos env铆ada por FTP: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interfaz"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"descripci贸n de las opciones:\n"
+"\n"
+" - Respladar archivos del sistema:\n"
+" \n"
+"\tEsta opci贸n permite respaldar su directorio /etc, que\n"
+"\tcontiene todos los archivos de configuraci贸n. Por favor\n"
+"\ttenga cuidado durante la restauraci贸n de no sobre-escribir:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Respaldar archivos de usuario:\n"
+"\n"
+"\tEsta opci贸n permite seleccionar todos los usuarios que\n"
+"\tdesea respaldar.\n"
+"\tPara preservar espacio, se recomienda no incluir el\n"
+"\tcache del navegador web.\n"
+"\n"
+" - Respaldar otros archivos:\n"
+"\n"
+"\tEsta opci贸n permite a帽adir m谩s datos a guardar.\n"
+"\tCon el otro respaldo no es posible, por ahora,\n"
+"\tseleccionar el respaldo incremental.\t\t\n"
+" \n"
+" - Respaldo incremental:\n"
+"\n"
+"\tEl respaldo incremental es la opci贸n m谩s potente.\n"
+"\tLe permite respaldar todos sus datos la primera\n"
+"\tvez, y luego s贸lo aquellos que cambiaron.\n"
+"\tLuego, podr谩, durante la etapa de restauraci贸n,n\trestaurar sus datos "
+"desde una fecha especificada.\n"
+"\t\n"
+"\tSi no ha seleccionado esta opci贸n todos los\n"
+"\trespaldos antiguos se borran antes de volver a respaldar.\n"
"\n"
"\n"
-"(隆ATENCI脫N! Est谩 utilizando XFS en su partici贸n ra铆z,\n"
-"la creaci贸n de un disquete de arranque en un disquete de 1.44Mb puede "
-"fallar\n"
-"porque XFS necesita un controlador muy grande)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"煤til\n"
-"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
-"operativo borra\n"
-"SILO, o si SILO no funciona con su configuraci贸n de hardware. Un disquete\n"
-"de arranque personalizado tambi茅n se puede usar con la imagen de rescate de\n"
-" Mandrake haciendo as铆 mucho m谩s f谩cil la recuperaci贸n en caso de fallo\n"
-"grave del sistema.\n"
+"Argumentos: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
-"en la primer disquetera y presione \"Aceptar\"."
+"Habilitar/deshabilitar reportes de syslog en consola 12. \\fIexpr\\fP es la\n"
+"expresi贸n que describe que registrar (vea syslog.conf(5) para m谩s detalles) "
+"y\n"
+"dev el dispositivo donde reportar el registro."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No puede instalar el cargador de arranque en una partici贸n %s\n"
+msgid "comma separated strings"
+msgstr "cadenas de caracteres separadas por comas"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "no hay espacio suficiente en /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
+"Estas son las m谩quinas desde las cuales deber铆an utilizarse los esc谩neres:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Se va a iniciar la entrada resaltada en %d segundos."
+msgid "Messages"
+msgstr "Mensajes"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Desconocido|CPH06X (bt878) [muchos fabricantes]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
+msgid "POP and IMAP Server"
+msgstr "Servidor POP e IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use las teclas %c y %c para seleccionar una entrada."
+msgid "Mexico"
+msgstr "M茅xico"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "隆Bienvenido a GRUB, el selector de SO de arranque!"
+msgid "Model stepping"
+msgstr "Paso del modelo"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "驴Tiene alguna interfaz %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO con men煤 de texto"
+msgid "Switzerland"
+msgstr "Suiza"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO con men煤 gr谩fico"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Opciones de la impresora remota lpd"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"隆Bienvenido a %s, el selector de SO de arranque!\n"
+"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
+"puede tener sus preferencias propias, sus archivos propios, y as铆\n"
+"sucesivamente. Puede leer la \"Gu铆a de Comienzo\" para aprender m谩s. Pero,\n"
+"a diferencia de \"root\", que es el administrador del sistema, los usuarios\n"
+"que agregue en este punto no estar谩n autorizados a cambiar nada excepto su\n"
+"configuraci贸n y sus archivos propios, protegiendo al sistema contra cambios\n"
+"no intencionales o maliciosos que pueden impactar al sistema como un todo.\n"
+"Tendr谩 que crear al menos un usuario no privilegiado para Usted mismo - esa\n"
+"cuenta es la que deber铆a utilizar para el uso rutinario diario. Aunque es\n"
+"muy pr谩ctico ingresar como \"root\" para hacer cualquier cosa y de todo,\n"
+"隆tambi茅n puede ser muy peligroso! Un error podr铆a significar que su sistema\n"
+"deje de funcionar. Si comete un error serio como usuario no privilegiado,\n"
+"s贸lo puede llegar a perder algo de informaci贸n, pero no afectar a todo el\n"
+"sistema.\n"
"\n"
-"Elija un sistema operativo de la lista o espere %d segundos\n"
-"para que arranque el sistema predeterminado.\n"
+"El primer campo le pide un nombre real. Por supuesto, esto no es\n"
+"obligatorio - en realidad, puede ingresar lo que desee. DrakX usar谩 la\n"
+"primer palabra que ingres贸 y la copiar谩 al campo \"%s\", que es el nombre\n"
+"que este usuario en particular usar谩 para ingresar al sistema. Si lo desea,\n"
+"puede omitir lo predeterminado y cambiar el nombre de usuario. El pr贸ximo\n"
+"paso es ingresar una contrase帽a. La contrase帽a de un usuario no\n"
+"privilegiado (regular) no es tan crucial como la de \"root\" desde el punto\n"
+"de vista de la seguridad, pero esto no es raz贸n alguna para obviarla o\n"
+"hacerla muy simple: despu茅s de todo, son sus archivos los que podr铆an estar\n"
+"en peligro.\n"
+"\n"
+"Una vez que hace clic sobre \"%s\", puede agregar otros usuarios. Agregue\n"
+"un usuario para cada uno de sus amigos: por ejemplo su padre o su hermana.\n"
+"Haga clic sobre \"%s\" cuando haya terminado de agregar todos los usuarios\n"
+"que desee.\n"
+"\n"
+"Hacer clic sobre el bot贸n \"%s\" le permite cambiar el \"shell\"\n"
+"predeterminado para ese usuario (bash, por defecto)\n"
"\n"
+"Cuando haya finalizado de a帽adir todos los usuarios se le propone elegir un\n"
+"usuario para conectarse autom谩ticamente en el sistema cuando arranca la\n"
+"computadora. Si est谩 interesado en esta caracter铆stica (y no le importa\n"
+"mucho la seguridad local), elija el usuario y administrador de ventanas\n"
+"deseado. Si no est谩 interesado en esta caracter铆stica, quite la marca de la\n"
+"casilla \"%s\". Haga clic sobre \"%s\" una vez que seleccion贸 su\n"
+"preferencia."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "falta \"consolehelper\""
+msgid "Configure Internet Access..."
+msgstr "Configurar el acceso a Internet..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "no se encuentra kdesu"
+msgid "Norway"
+msgstr "Noruega"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
+msgid "Danish"
+msgstr "Dan茅s"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-"Luego de la instalaci贸n estar谩n disponibles las instant谩neas de pantalla en %"
-"s"
+"Activar el bloqueo num茅rico autom谩ticamente bajo la consola y\n"
+"XFree al arrancar."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "No se pueden realizar instant谩neas de pantalla antes del particionado"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Por favor, introduzca la direcci贸n IP de esta m谩quina.\n"
+"Cada valor tiene que introducirse como una direcci贸n IP en notaci贸n\n"
+"decimal con puntos (por ejemplo: 1.2.3.4)."
-#: ../../common.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"La instalaci贸n de Mandrake Linux se divide en varios CD-ROM. DrakX sabe si\n"
+"un paquete seleccionado se encuentra en otro CD por lo que expulsar谩 el CD\n"
+"corriente y le pedir谩 que inserte el CD correcto cuando sea necesario."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuto"
+msgid "Processors"
+msgstr "Procesadores"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
+msgid "Bulgaria"
+msgstr "Bulgaria"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "No NIC selected!"
+msgstr "隆No se seleccion贸 NIC!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Islas Svalbard e Islas Jan Mayen"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Ocurrieron problemas durante la configuraci贸n.\n"
+"Verifique su conexi贸n con net_monitor o mcc. Si su conexi贸n no funciona, "
+"puede que desee volver a iniciar la configuraci贸n"
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "partition %s is now known as %s"
+msgstr "la partici贸n %s ahora se conoce como %s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "United States"
-msgstr "Estados Unidos"
+msgid "Backup Other files..."
+msgstr "Respaldar otros archivos..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Austria"
-msgstr "Austria"
+msgid "SMB server IP"
+msgstr "IP del servidor SMB"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italia"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Holanda"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "隆Se escribir谩 al disco la tabla de particiones de la unidad %s!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Suecia"
+msgid "Installing HPOJ package..."
+msgstr "Instalando paquete HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Norway"
-msgstr "Noruega"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Un disquete de arranque personalizado da la posibilidad de arrancar su "
+"equipo\n"
+"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
+"煤til\n"
+"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
+"sistema operativo borra\n"
+"LILO, o si LILO no funciona con su configuraci贸n de hardware. Un disquete\n"
+"de arranque personalizado tambi茅n se puede usar con la imagen de rescate de\n"
+"Mandrake haciendo as铆 mucho m谩s f谩cil la recuperaci贸n en caso de fallo\n"
+"grave del sistema. 驴Desea crear un disquete de arranque para su sistema?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Greece"
-msgstr "Grecia"
+msgid ", USB printer \\#%s"
+msgstr ", impresora USB \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Germany"
-msgstr "Alemania"
+msgid "Latvian"
+msgstr "Let贸n"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech Republic"
-msgstr "Rep煤blica Checa"
+msgid "monthly"
+msgstr "cada mes"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Belgium"
-msgstr "B茅lgica"
+msgid "Module name"
+msgstr "Nombre del m贸dulo"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "France"
-msgstr "Francia"
+msgid "Start at boot"
+msgstr "Iniciar al arrancar"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "First sector of drive (MBR)"
+msgstr "Primer sector del disco (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Error al abrir %s para escribir: %s"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Nada para hacer"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "No hay espacio libre suficiente para la asignaci贸n autom谩tica"
+msgid "Use Unicode by default"
+msgstr "Usar Unicode predeterminadamente"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "el m贸dulo del n煤cleo GNU/Linux que maneja ese dispositivo"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Tratando de rescatar la tabla de particiones"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "隆La opci贸n %s debe ser un n煤mero entero!"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Necesita un sistema de archivos verdadero (ext2/ext3, reiserfs, xfs o jfs) "
-"para este punto de montaje\n"
+"Entradas que tendr谩 que rellenar:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio deber铆a permanecer dentro del sistema de archivos ra铆z"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "隆隆隆 No se puede iniciar la actualizaci贸n en vivo !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No puede usar un Volumen L贸gico LVM para el punto de montaje %s"
+msgid "Name: "
+msgstr "Nombre: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Eligi贸 una partici贸n RAID en software como partici贸n ra铆z (/).\n"
-"Ning煤n cargador de arranque es capaz de manejar esto sin una partici贸n /"
-"boot.\n"
-"Por favor, aseg煤rese de a帽adir una partici贸n /boot."
+msgid "16 million colors (24 bits)"
+msgstr "16 millones de colores (24 bits)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ya existe una partici贸n con el punto de montaje %s\n"
+msgid "Allow all users"
+msgstr "Permitir a todos los usuarios"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Los puntos de montaje deber铆an contener s贸lo caracteres alfanum茅ricos"
+msgid "The official MandrakeSoft Store"
+msgstr "La tienda oficial de MandrakeSoft"
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Los puntos de montaje deben comenzar con una /"
+msgid "Resizing"
+msgstr "Redimensionando"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
+msgid "Cable connection"
+msgstr "Conexi贸n por cable"
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No se puede usar JFS para particiones menores de 32MB"
+msgid "User"
+msgstr "Usuario"
#: ../../fsedit.pm:1
#, c-format
@@ -996,1378 +1958,258 @@ msgstr ""
"\n"
"驴Est谩 de acuerdo en perder todas las particiones?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Error"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Realizar respaldo nuevo antes de restaurar (s贸lo para respaldos "
+"incrementales)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "servidor"
+msgid "Printer on parallel port \\#%s"
+msgstr "Impresora en puerto paralelo \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "con /usr"
+msgid "Name"
+msgstr "Nombre"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simple"
+msgid "mkraid failed"
+msgstr "Fall贸 mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Habilitando la partici贸n swap %s"
+msgid "Button 3 Emulation"
+msgstr "Emulaci贸n del bot贸n 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error desmontando %s: %s"
+msgid "Sending files..."
+msgstr "Enviando archivos..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "fall贸 el montaje de la partici贸n %s en el directorio %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israel铆 (fon茅tico)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Montando la partici贸n %s"
+msgid "access to rpm tools"
+msgstr "acceso a herramientas rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "Verificando %s"
+msgid "edit"
+msgstr "editar"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formateando la partici贸n %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "隆Debe elegir/ingresar una impresora o un dispositivo!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando y formateando el archivo %s"
+msgid "Permission problem accessing CD."
+msgstr "Problema de permisos al acceder al CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No s茅 c贸mo formatear %s en el tipo %s"
+msgid "Phone number"
+msgstr "N煤mero de tel茅fono"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formateo de %s fall贸"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Error: el controlador \"%s\" para su tarjeta de sonido no est谩 listado"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Haga clic sobre \"Siguiente ->\" si desea borrar todos los datos y\n"
-"particiones presentes en esta unidad de disco. Tenga cuidado, luego de\n"
-"hacer clic sobre \"Siguiente ->\", no podr谩 recuperar los datos y las\n"
-"particiones presentes en esta unidad de disco, incluyendo los datos de\n"
-"Windows.\n"
-"\n"
-"Haga clic sobre \"<- Anterior\" para detener esta operaci贸n sin perder los\n"
-"datos ni las particiones presentes en esta unidad de disco."
+msgid "Printer name, description, location"
+msgstr "Nombre de la impresora, descripci贸n, ubicaci贸n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Elija la unidad de disco que desea borrar para instalar su partici贸n\n"
-"Mandrake Linux nueva. Tenga cuidado, 隆se perder谩n todos los datos de la\n"
-"misma y no se podr谩n recuperar!."
+msgid "USA (broadcast)"
+msgstr "EEUU (difusi贸n)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"A manera de revisi贸n, DrakX presentar谩 un resumen de las distintas\n"
-"informaciones que tiene acerca de su sistema. Dependiendo del hardware\n"
-"instalado, puede tener algunas o todas las entradas siguientes. Cada\n"
-"entrada est谩 compuesta de el elemento de configuraci贸n a configurar,\n"
-"seguido de un peque帽o resumen de la configuraci贸n corriente. Haga clic\n"
-"sobre el bot贸n \"Configurar\" correspondiente para cambiar eso.\n"
-"\n"
-" * \"Teclado\": verifique la configuraci贸n de la disposici贸n corriente del\n"
-"teclado y c谩mbiela si es necesario.\n"
-"\n"
-" * \"Pa铆s\": verifique la selecci贸n corriente del pa铆s. Si Usted no se\n"
-"encuentra en este pa铆s, haga clic sobre el bot贸n \"Configurar\" y elija\n"
-"otro. Si su pa铆s no se muestra en la primer lista, haga clic sobre el bot贸n\n"
-"\"M谩s\" para obtener la lista completa de pa铆ses.\n"
-"\n"
-" * \"Huso horario\": De manera predeterminada, DrakX deduce su huso horario\n"
-"bas谩ndose en el pa铆s que ha elegido. Puede hacer clic sobre el bot贸n\n"
-"\"Configurar\" si esto no es correcto.\n"
-"\n"
-" * \"Rat贸n\": verifique la configuraci贸n del rat贸n y haga clic sobre el\n"
-"bot贸n para cambiarla, si es necesario.\n"
-"\n"
-" * \"Impresora\": al hacer clic sobre el bot贸n \"Configurar\" se abrir谩 el\n"
-"asistente de configuraci贸n de la impresora. Consulte el cap铆tulo\n"
-"correspondiente de la \"Gu铆a de Comienzo\" para m谩s informaci贸n sobre c贸mo\n"
-"configurar una impresora nueva. La interfaz presentada all铆 es similar a la\n"
-"utilizada durante la instalaci贸n.\n"
-"\n"
-" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su\n"
-"sistema, la misma se muestra aqu铆. Si nota que la tarjeta de sonido\n"
-"mostrada no es la que est谩 realmente instalada en su sistema, puede hacer\n"
-"clic sobre el bot贸n y elegir otro controlador.\n"
-"\n"
-" * \"Interfaz gr谩fica\": de manera predeterminada, DrakX configura su\n"
-"interfaz gr谩fica en \"800x600\" o \"1024x768\" de resoluci贸n. Si eso no le\n"
-"satisface, haga clic sobre \"Configurar\" para volver a configurar su\n"
-"interfaz gr谩fica.\n"
-"\n"
-" * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-"misma se muestra aqu铆. Si tiene una tarjeta de TV y la misma no se detecta,\n"
-"haga clic sobre \"Configurar\" para intentar configurarla a mano.\n"
-"\n"
-" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
-"se muestra aqu铆. Puede hacer clic sobre \"Configurar\" para cambiar los\n"
-"par谩metros asociados a la misma.\n"
-"\n"
-" * \"Red\": se desea configurar ahora el acceso a la Internet o su red\n"
-"local.\n"
-"\n"
-" * \"Nivel de seguridad\": esta entrada le ofrece volver a definir el nivel\n"
-"de seguridad como se ajust贸 en un paso previo ()\n"
-"\n"
-" * \"Cortafuegos\": si planifica conectar su m谩quina a la Internet, es una\n"
-"buena idea protegerse de las intrusiones configurando un cortafuegos.\n"
-"Consulte la secci贸n correspondiente de la \"Gu铆a de Comienzo\" para\n"
-"detalles acerca de los ajustes del cortafuegos.\n"
-"\n"
-" * \"Cargador de arranque\": si desea cambiar la configuraci贸n de su\n"
-"cargador de arranque, haga clic sobre ese bot贸n. Esto deber铆a estar\n"
-"reservado para usuarios avanzados.\n"
-"\n"
-" * \"Servicios\": aqu铆 podr谩 tener un control fino sobre qu茅 servicios\n"
-"correr谩n en su m谩quina. Si planifica utilizar esta m谩quina como servidor es\n"
-"una buena idea revisar estos ajustes."
+"Por favor, elija el soporte\n"
+"para la copia de respaldo."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su sistema,\n"
-"la misma se muestra aqu铆. Si nota que la tarjeta de sonido mostrada no es\n"
-"la que est谩 realmente instalada en su sistema, puede hacer clic sobre el\n"
-"bot贸n y elegir otro controlador."
+msgid "Use Xinerama extension"
+msgstr "Usar extensi贸n Xinerama"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
-"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
-"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
-"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
-"esta pantalla. Tenga cuidado de elegir los par谩metros correctos.\n"
-"\n"
-"Las opciones principales de Yaboot son:\n"
-"\n"
-" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
-"prompt de arranque.\n"
-"\n"
-" * Dispositivo de arranque: indica donde desea colocar la informaci贸n\n"
-"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
-"partici贸n bootstrap con anterioridad para contener esta informaci贸n.\n"
-"\n"
-" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
-"disponibles con Yaboot. La primera se mide en segundos y aqu铆 puede elegir\n"
-"entre CD, arranque OF, MacOS o Linux.\n"
-"\n"
-" * Demora de arranque del n煤cleo: esta demora es similar a la demora de\n"
-"arranque de LILO. Luego de seleccionar Linux, tendr谩 esta demora en d茅cimas\n"
-"de segundo antes que se seleccione su descripci贸n del n煤cleo\n"
-"predeterminada.\n"
-"\n"
-" * 驴Habilitar arranque desde el CD?: marcando esta opci贸n Usted puede\n"
-"elegir \"C\" para el CD en el primer prompt de arranque.\n"
-"\n"
-" * 驴Habilitar arranque OF?: marcando esta opci贸n Usted puede elegir \"N\"\n"
-"para Open Firmware en el primer prompt de arranque.\n"
-"\n"
-" * SO predeterminado: puede seleccionar qu茅 sistema operativo arrancar谩 por\n"
-"defecto cuando expira la demora de Open Firmware."
+msgid "Loopback"
+msgstr "Loopback"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
-"operativos, n煤cleos alternativos, o para una imagen de arranque de\n"
-"emergencia.\n"
-"\n"
-"Para otros sistemas operativos, la entrada consiste s贸lo de una etiqueta y\n"
-"la partici贸n ra铆z.\n"
-"\n"
-"Para Linux, hay algunas opciones posibles:\n"
-"\n"
-" * Etiqueta: esta es simplemente el nombre que deber谩 teclear en el prompt\n"
-"de yaboot para seleccionar esta opci贸n de arranque.\n"
-"\n"
-" * Imagen: esta deber铆a ser el nombre del n煤cleo a arrancar. T铆picamente,\n"
-"vmlinux o una variaci贸n de vmlinux con una extensi贸n.\n"
-"\n"
-" * Ra铆z: el dispositivo \"root\" o \"/\" para su instalaci贸n Linux.\n"
-"\n"
-" * A帽adir: la opci贸n de a帽adir al n煤cleo se usa bastante sobre el hardware\n"
-"Apple para asistir en la inicializaci贸n del hardware de v铆deo, o para\n"
-"habilitar la emulaci贸n de los botones del rat贸n con el teclado para los\n"
-"botones 2do y 3ro del rat贸n que por lo general no tienen los ratones\n"
-"est谩ndar de Apple. Algunos ejemplos son los siguientes:\n"
-"\n"
-" \tvideo=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" \tvideo=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: esta opci贸n se puede usar o bien para cargar los m贸dulos\n"
-"iniciales, antes que est茅 disponible el dispositivo de arranque, o bien\n"
-"cargar una imagen de ramdisk para una situaci贸n de arranque de emergencia.\n"
-"\n"
-" * Tama帽o de Initrd: generalmente el tama帽o por defecto del ramdisk es 4096\n"
-"bytes. Puede usar esta opci贸n si necesita asignar un ramdisk mayor.\n"
-"\n"
-" * Lectura-Escritura: normalmente la partici贸n \"root\" se levanta en modo\n"
-"de s贸lo lectura, para permitir una verificaci贸n del sistema de archivos\n"
-"antes que el sistema se levante por completo. Aqu铆 puede cambiar esta\n"
-"opci贸n.\n"
-"\n"
-" * Sin v铆deol: en caso que el hardware de v铆deo de Apple sea "
-"excepcionalmente\n"
-"problem谩tico, puede seleccionar esta opci贸n para arrancar en el modo\n"
-"\"novideo\", con soporte nativo para el frame-buffer.\n"
-"\n"
-" * Predeterminada: selecciona a esta entrada como la opci贸n Linux por\n"
-"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
-"de Yaboot. Esta entrada tambi茅n se marcar谩 con un \"*\", si presiona [Tab]\n"
-"para ver las selecciones del arranque."
+"No se puede cerrar mkbootdisk adecuadamente: \n"
+" %s \n"
+" %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX primero detectar谩 cualquier dispositivo IDE presente en su\n"
-"computadora. Tambi茅n buscar谩 una o m谩s tarjetas SCSI PCI en su sistema. Si\n"
-"se encuentra una tarjeta SCSI, DrakX instalar谩 el controlador apropiado\n"
-"autom谩ticamente.\n"
-"\n"
-"Debido a que la detecci贸n de hardware a veces puede no detectar alguna\n"
-"pieza de hardware, DrakX puede fallar al detectar sus discos r铆gidos. De\n"
-"ser as铆, tendr谩 que especificar su hardware a mano.\n"
-"\n"
-"Si tiene que seleccionar su adaptador SCSI PCI manualmente, DrakX le\n"
-"preguntar谩 si desea especificar opciones para el mismo. Deber铆a permitir\n"
-"que DrakX sondee el hardware buscando las opciones espec铆ficas necesarias\n"
-"para inicializar el adaptador. La mayor铆a de las veces, DrakX pasar谩 esta\n"
-"etapa sin problema alguno.\n"
-"\n"
-"Si DrakX no puede sondear las opciones para determinar autom谩ticamente qu茅\n"
-"par谩metros deben pasarse, necesitar谩 configurar manualmente el controlador."
+msgid "West Europe"
+msgstr "Europa del oeste"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Ahora, es tiempo de seleccionar un sistema de impresi贸n para su\n"
-"computadora. Otros sistemas operativos pueden ofrecerle uno, pero Mandrake\n"
-"Linux le ofrece dos. Cada uno de los sistemas de impresi贸n es mejor para un\n"
-"tipo de configuraci贸n particular.\n"
-"\n"
-" * \"pdq\" - \"print, don't queue\" (imprimir sin poner en cola), es la\n"
-"elecci贸n si Usted tiene una conexi贸n directa a su impresora y desea evitar\n"
-"el p谩nico de los papeles trabados, y no tiene impresora en red alguna\n"
-"(\"pdq\" manejar谩 s贸lo casos de red muy simples y es algo lento cuando se\n"
-"utiliza con las redes) Se recomienda utilizar \"pdq\" si esta es su primer\n"
-"experiencia con GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - \"Common Unix Printing System\" (Sistema de Impresi贸n Com煤n\n"
-"de Unix) es una elecci贸n excelente para imprimir en su impresora local o en\n"
-"una en la otra punta del planeta. Es simple de configurar y puede actuar\n"
-"como servidor o cliente para el sistema de impresi贸n antiguo \"lpd\", por\n"
-"lo que es compatible con sistemas operativos m谩s antiguos que todav铆a\n"
-"pueden necesitar servicios de impresi贸n. Si bien es bastante potente, la\n"
-"configuraci贸n b谩sica es tan simple como la de \"pdq\". Si necesita que\n"
-"emule a un servidor \"lpd\", debe encender el demonio \"cups-lpd\".\n"
-"\"CUPS\" incluye interfaces gr谩ficas para imprimir o elegir las opciones de\n"
-"la impresora y para administrar la impresora.\n"
+"[OPCIONES] [NOMBRE_PROGRAMA]\n"
"\n"
-"Si hace una elecci贸n ahora, y m谩s tarde encuentra que a Usted no le gusta\n"
-"su sistema de impresi贸n, lo puede cambiar ejecutando PrinterDrake desde el\n"
-"Centro de Control de Mandrake y haciendo clic sobre el bot贸n para expertos."
+"OPCIONES:\n"
+" --help - imprime este mensaje.\n"
+" --report - programa deber铆a ser una herramienta mandrake\n"
+" --incident - programa deber铆a ser una herramienta mandrake"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
-"etapa est谩 completamente automatizada. DrakX analizar谩 el sector de\n"
-"arranque del disco y actuar谩 en funci贸n de lo que encuentre all铆:\n"
-"\n"
-" * si encuentra un sector de arranque de Windows, lo reemplazar谩 con un\n"
-"sector de arranque de grub/LILO de forma tal que Usted pueda cargar\n"
-"GNU/Linux u otro sistema operativo;\n"
-"\n"
-" * si encuentra un sector de arranque de grub o LILO, lo reemplazar谩 con\n"
-"uno nuevo;\n"
-"\n"
-"Si no puede realizar una determinaci贸n, DrakX le pedir谩 d贸nde colocar el\n"
-"cargador de arranque.\n"
-"\n"
-"\"Dispositivo de arranque\": en la mayor铆a de los casos, Usted no cambiar谩\n"
-"lo predeterminado (\"Primer sector del disco (MBR)\"), pero si prefiere, el\n"
-"cargador de arranque se puede instalar en el segundo disco r铆gido\n"
-"(\"/dev/hdb\"), o incluso en un disquete (\"En disquete\")"
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 versi贸n %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Luego que haya configurado los par谩metros generales del cargador de\n"
-"arranque se mostrar谩 la lista de opciones de arranque que estar谩n\n"
-"disponibles al momento de arrancar.\n"
-"\n"
-"Si hay otros sistemas operativos instalados en su m谩quina los mismos se\n"
-"agregar谩n autom谩ticamente al men煤 de arranque. Aqu铆 puede elegir ajustar\n"
-"las opciones existentes haciendo clic sobre \"A帽adir\" para crear una nueva\n"
-"entrada; seleccionando una entrada y haciendo clic sobre \"Modificar\" o\n"
-"\"Quitar\" para modificarla o quitarla. \"Aceptar\" valida sus cambios.\n"
-"\n"
-"Tambi茅n, puede ser que no desee dar acceso a los otros sistemas operativos\n"
-"a cualquiera que vaya a la consola y reinicie la m谩quina. Puede borrar las\n"
-"entradas correspondientes para los sistemas operativos para quitarlas del\n"
-"men煤, pero 隆necesitar谩 un disquete de arranque para poder arrancar esos\n"
-"otros sistemas operativos!"
+msgid "Copying %s"
+msgstr "Copiando %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Este di谩logo le permite un ajuste fino de su cargador de arranque:\n"
-"\n"
-" * \"Cargador de arranque a usar\": hay tres opciones para su cargador de\n"
-"arranque:\n"
-"\n"
-" * \"GRUB\": si prefiere a grub (men煤 de texto).\n"
-"\n"
-" * \"LILO con men煤 de texto\": si prefiere a LILO con su interfaz de\n"
-"texto.\n"
-"\n"
-" * \"LILO con men煤 gr谩fico\": si prefiere a LILO con su interfaz\n"
-"gr谩fica.\n"
-"\n"
-" * \"Dispositivo de arranque\": en la mayor铆a de los casos, no cambiar谩 lo\n"
-"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
-"se puede instalar en el segundo disco r铆gido (\"/dev/hdb\"), o incluso en\n"
-"un disquete (\"/dev/fd0\").\n"
-"\n"
-" * \"Demora antes de arrancar la imagen predeterminada\": luego de arrancar\n"
-"o volver a arrancar la computadora, esta es la demora que se garantiza al\n"
-"usuario para elegir, en el men煤 del cargador de arranque, una entrada\n"
-"distinta a la predeterminada.\n"
-"\n"
-"!! Tenga presente que si no elige instalar un cargador de arranque\n"
-"(seleccionando \"Omitir\"), 隆debe asegurarse que tiene una forma de\n"
-"arrancar a su sistema Mandrake Linux! Tambi茅n debe asegurarse que sabe lo\n"
-"que hace antes de cambiar cualquier opci贸n. !!\n"
-"\n"
-"Haciendo clic sobre el bot贸n \"Avanzadas\" en este di谩logo se le ofrecer谩n\n"
-"opciones avanzadas que est谩n reservadas para el usuario experto."
+msgid "Choose color"
+msgstr "elija color"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Este es el punto de decisi贸n m谩s crucial para la seguridad de su sistema\n"
-"GNU/Linux: tendr谩 que ingresar la contrase帽a de \"root\". El usuario\n"
-"\"root\" es el administrador del sistema y es el 煤nico autorizado a hacer\n"
-"actualizaciones, agregar usuarios, cambiar la configuraci贸n general del\n"
-"sistema, etc. Resumiendo, 隆\"root\" puede hacer de todo!. Es por esto que\n"
-"deber谩 elegir una contrase帽a que sea dif铆cil de adivinar - DrakX le dir谩 si\n"
-"la que eligi贸 es demasiado f谩cil. Como puede ver, no es forzoso ingresar\n"
-"una contrase帽a, pero le recomendamos encarecidamente que ingrese una.\n"
-"GNU/Linux es tan propenso a errores del operador como cualquier otro\n"
-"sistema operativo. Debido a que \"root\" puede sobrepasar todas las\n"
-"limitaciones y borrar, sin intenci贸n, todos los datos que se encuentran en\n"
-"las particiones accediendo a las mismas sin el cuidado suficiente, es que\n"
-"es importante que sea dif铆cil convertirse en \"root\".\n"
-"\n"
-"La contrase帽a deber铆a ser una mezcla de caracteres alfanum茅ricos y tener al\n"
-"menos una longitud de 8 caracteres. Nunca escriba la contrase帽a de \"root\"\n"
-"- en un papel, eso hace que sea muy f谩cil comprometer a un sistema.\n"
-"\n"
-"Sin embargo, no deber铆a hacer la contrase帽a muy larga o complicada 隆debido\n"
-"a que Usted debe poder recordarla!\n"
-"\n"
-"La contrase帽a no se mostrar谩 en la pantalla a medida que Usted la teclee.\n"
-"Por lo tanto, tendr谩 que teclear la contrase帽a dos veces para reducir la\n"
-"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
-"mismo error de tecleo, tendr谩 que utilizar esta contrase帽a \"incorrecta\"\n"
-"la primera vez que se conecte.\n"
-"\n"
-"Si desea que el acceso a esta computadora est茅 controlado por un servidor\n"
-"de autenticaci贸n, haga clic sobre el bot贸n \"Avanzadas\".\n"
-"\n"
-"Si su red usa los protocolos LDAP, NIS, o servicios de autenticaci贸n de PDC\n"
-"Dominio de Windows, seleccione el bot贸n apropiado como \"autenticaci贸n\".\n"
-"Si no sabe cual utilizar, pregunte al administrador de su red.\n"
-"\n"
-"Si ocurre que tiene problemas para recordar contrase帽as, puede elegir el\n"
-"bot贸n \"Sin contrase帽a\", si es que su computadora no estar谩 conectada a la\n"
-"Internet y Usted conf铆a en cualquier persona que tenga acceso a la misma."
+msgid "Dominican Republic"
+msgstr "Rep煤blica Dominicana"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
-"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
+msgid "Swaziland"
+msgstr "Swazilandia"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Por lo general, DrakX no tiene problemas en detectar la cantidad de botones\n"
-"que tiene su rat贸n. En caso contrario, asume que Usted tiene un rat贸n de\n"
-"dos botones y lo configurar谩 para que emule el tercer bot贸n. El tercer\n"
-"bot贸n del rat贸n de un rat贸n de dos botones se puede \"presionar\" haciendo\n"
-"clic simult谩neamente sobre el bot贸n izquierdo y el derecho. DrakX sabr谩\n"
-"autom谩ticamente si su rat贸n utiliza una interfaz PS/2, serie o USB.\n"
-"\n"
-"Si, por alguna raz贸n, desea especificar un tipo de rat贸n diferente,\n"
-"selecci贸nelo de la lista que se proporciona.\n"
-"\n"
-"Si elige un rat贸n distinto al predeterminado, se le presentar谩 una pantalla\n"
-"de prueba. Use los botones y la rueda para verificar que la configuraci贸n\n"
-"es correcta y que el rat贸n est谩 funcionando correctamente. Si el rat贸n no\n"
-"est谩 funcionando bien, presione la barra espaciadora o [Intro] para\n"
-"cancelar la prueba y volver a la lista de opciones.\n"
-"\n"
-"Los ratones con rueda a veces no se detectan autom谩ticamente, por lo que\n"
-"deber谩 seleccionar su rat贸n de una lista. Debe asegurarse de seleccionar el\n"
-"correspondiente al puerto en el cual est谩 conectado su rat贸n. Despu茅s de\n"
-"seleccionar un rat贸n y presionar el bot贸n \"Siguiente ->\", se muestra una\n"
-"imagen de un rat贸n en la pantalla. Mueva la rueda de su rat贸n para\n"
-"asegurarse que est谩 activa correctamente. Una vez que ve que se mueve la\n"
-"rueda en la pantalla a medida que mueve la rueda de su rat贸n, pruebe los\n"
-"botones y verifique que el puntero del rat贸n se mueve en la pantalla a\n"
-"medida que mueve su rat贸n."
+msgid "Set-UID"
+msgstr "Set-UID"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"El primer paso es elegir el idioma de instalaci贸n. En el ejemplo se elige\n"
-"\"America->Espa帽ol\".\n"
-"\n"
-"Su elecci贸n de idioma preferido afectar谩 el idioma de la documentaci贸n, el\n"
-"instalador y el sistema en general. Seleccione primero la regi贸n en la que\n"
-"se encuentra, y luego el idioma que habla.\n"
-"\n"
-"Al hacer clic sobre el bot贸n \"Avanzado\" podr谩 seleccionar otros idiomas\n"
-"para instalar en su estaci贸n de trabajo, instalando as铆 los archivos\n"
-"espec铆ficos para esos idiomas para la documentaci贸n y las aplicaciones. Por\n"
-"ejemplo, si albergar谩 a gente de Francia en su m谩quina, seleccione Espa帽ol\n"
-"como idioma principal en la vista de 谩rbol y \"Franc茅s|Francia\" en la\n"
-"secci贸n avanzada.\n"
-"\n"
-"Note que no est谩 limitado a elegir un 煤nico idioma adicional. Puede elegir\n"
-"varios, o incluso instalarlos a todos eligiendo la casilla \"Todos los\n"
-"idiomas\". Seleccionar el soporte para un idioma significa que se\n"
-"instalar谩n las traducciones, tipograf铆as, correctores ortogr谩ficos, etc.\n"
-"para dicho idioma. Adicionalmente, la casilla \"Usar Unicode\n"
-"predeterminadamente\" permite forzar al sistema a utilizar Unicode (UTF-8)\n"
-"Sin embargo, note que esta es una caracter铆stica experimental. Si\n"
-"selecciona diferentes idiomas que necesitan codificaciones diferentes de\n"
-"todas formas se instalar谩 el soporte para Unicode.\n"
-"\n"
-"Para cambiar de un idioma a otro, Usted puede ejecutar, como \"root\", el\n"
-"comando \"/usr/sbin/localedrake\" para cambiar el idioma de todo el\n"
-"sistema, o ejecutarlo como usuario no privilegiado para cambiar s贸lo el\n"
-"idioma predeterminado de ese usuario.\n"
-"\n"
-"(*) Ya que de ah铆 viene el traductor [:-)]"
+msgid "Please check if you are using CDRW media"
+msgstr "Por favor, marque si est谩 utilizando un soporte CDRW"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Dependiendo del idioma predeterminado que eligi贸 en , DrakX selecciona\n"
-"autom谩ticamente un tipo particular de configuraci贸n del teclado. Sin\n"
-"embargo, podr铆a no tener un teclado que se corresponde exactamente con su\n"
-"idioma: por ejemplo, si Usted es un argentino que habla ingl茅s, todav铆a\n"
-"podr铆a desear que su teclado sea un teclado Latinoamericano. O si habla\n"
-"castellano pero est谩 en Inglaterra puede estar en la misma situaci贸n en la\n"
-"cual su idioma nativo y su teclado no coinciden. En cualquier caso, este\n"
-"paso de instalaci贸n le permitir谩 elegir un teclado apropiado de una lista.\n"
-"\n"
-"Haga clic sobre el bot贸n \"M谩s\" para que se le presente la lista completa\n"
-"de los teclados soportados.\n"
-"\n"
-"Si eligi贸 una distribuci贸n de teclado basada en un alfabeto no latino, el\n"
-"pr贸ximo di谩logo le permitir谩 elegir la combinaci贸n de teclas que cambiar谩\n"
-"la distribuci贸n del teclado entre la latina y la no latina."
+"Elija la unidad de disco que desea borrar para instalar su partici贸n\n"
+"Mandrake Linux nueva. Tenga cuidado, 隆se perder谩n todos los datos de la\n"
+"misma y no se podr谩n recuperar!."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Este paso se activa s贸lo si se encontr贸 una partici贸n GNU/Linux antigua en\n"
-"su sistema.\n"
-"\n"
-"DrakX ahora necesita saber si desea realizar una instalaci贸n nueva o una\n"
-"actualizaci贸n de un sistema Mandrake Linux existente:\n"
-"\n"
-" * \"Instalar\": Esta opci贸n borrar谩 pr谩cticamente por completo el sistema\n"
-"anterior. Si desea cambiar la forma en que se particionan sus discos, o\n"
-"cambiar el sistema de archivos, deber铆a utilizar esta opci贸n. Sin embargo,\n"
-"dependiendo de su esquema de particionado, puede evitar que se\n"
-"sobre-escriban algunos datos existentes.\n"
-"\n"
-" * \"Actualizaci贸n\": Esta clase de instalaci贸n le permite actualizar los\n"
-"paquetes que en este momento est谩n instalados en su sistema Mandrake Linux.\n"
-"No se alteran las particiones corrientes de sus discos ni los datos de los\n"
-"usuarios. La mayor铆a de los otros pasos de configuraci贸n permanecen\n"
-"disponibles, de manera similar a lo que ocurre con una instalaci贸n\n"
-"est谩ndar.\n"
-"\n"
-"El uso de la opci贸n \"Actualizar\" deber铆a funcionar sin problemas para los\n"
-"sistemas Mandrake Linux que corren la versi贸n \"8.1\" o una posterior. No\n"
-"se recomienda realizar una actualizaci贸n sobre versiones anteriores a\n"
-"Mandrake Linux versi贸n \"8.1\"."
+msgid " on parallel port \\#%s"
+msgstr " en el puerto paralelo \\#%s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Pa铆s\": verifique la selecci贸n corriente del pa铆s. Si Usted no se\n"
-"encuentra en este pa铆s, haga clic sobre el bot贸n \"Configurar\" y elija\n"
-"otro. Si su pa铆s no se muestra en la primer lista, haga clic sobre el bot贸n\n"
-"\"M谩s\" para obtener la lista completa de pa铆ses."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use las teclas %c y %c para seleccionar una entrada."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Se ha detectado m谩s de una partici贸n Microsoft Windows en su disco r铆gido.\n"
-"Por favor, elija aquella a la cual desea cambiarle el tama帽o para poder\n"
-"instalar su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Cada partici贸n se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
-"\"Capacidad\".\n"
-"\n"
-"\"Nombre Linux\" est谩 estructurado: \"tipo de disco r铆gido\", \"n煤mero de\n"
-"disco r铆gido\", \"n煤mero de partici贸n\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco r铆gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"N煤mero de disco r铆gido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco r铆gido maestro en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"b\" significa \"disco r铆gido esclavo en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"c\" significa \"disco r铆gido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco r铆gido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc.\n"
-"\n"
-"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
-"primer disco o partici贸n se denomina \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Rat贸n de 2 botones gen茅rico"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ahora necesita elegir qu茅 particiones se utilizar谩n para la instalaci贸n de\n"
-"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
-"por una instalaci贸n previa de GNU/Linux o con otra herramienta de\n"
-"particionado, puede utilizarlas. De lo contrario, se deben definir\n"
-"particiones en el disco r铆gido.\n"
-"\n"
-"Para crear particiones, primero debe seleccionar un disco r铆gido. Puede\n"
-"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
-"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
-"SCSI y as铆 sucesivamente.\n"
-"\n"
-"Para particionar el disco r铆gido seleccionado, puede utilizar estas\n"
-"opciones:\n"
-"\n"
-" * \"Borrar todo\": esta opci贸n borra todas las particiones sobre el disco\n"
-"seleccionado.\n"
-"\n"
-" * \"Asignaci贸n autom谩tica\": esta opci贸n le permite crear particiones ext3\n"
-"y swap autom谩ticamente en el espacio libre de su disco r铆gido.\n"
-"\n"
-" * \"M谩s\": le da acceso a caracter铆sticas adicionales:\n"
-"\n"
-" * \"Guardar tabla de particiones\": guarda la tabla de particiones en\n"
-"un disquete. 脷til para recuperar la tabla de particiones m谩s adelante en\n"
-"caso que sea necesario. Es altamente recomendable realizar este paso.\n"
-"\n"
-" * \"Recuperar tabla de particiones\": esta opci贸n le permitir谩\n"
-"restaurar una tabla de particiones guardada previamente en un disquete.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones est谩\n"
-"da帽ada puede intentar recuperarla utilizando esta opci贸n. Por favor, tenga\n"
-"cuidado y recuerde que puede fallar.\n"
-"\n"
-" * \"Volver a cargar\": descarta todos los cambios y carga su tabla de\n"
-"particiones inicial.\n"
-"\n"
-" * \"Montaje autom谩tico de soportes removibles\": si desmarca esta\n"
-"opci贸n los usuarios estar谩n forzados a montar y desmontar manualmente los\n"
-"soportes removibles como los disquetes y los CD-ROM.\n"
-"\n"
-" * \"Asistente\": use esta opci贸n si desea utilizar un asistente para\n"
-"particionar su disco r铆gido. Se recomienda esto si no tiene un buen\n"
-"conocimiento del particionado.\n"
-"\n"
-" * \"Deshacer\": use esta opci贸n para cancelar sus cambios.\n"
-"\n"
-" * \"Cambiar a modo normal/experto\": permite realizar acciones adicionales\n"
-"sobre las particiones (tipo, opciones, formatear) y brinda m谩s informaci贸n.\n"
-"\n"
-" * \"Hecho\": cuando ha terminado de particionar su disco r铆gido, esto\n"
-"guardar谩 sus cambios en el disco.\n"
-"\n"
-"Cuando se define el tama帽o de una partici贸n, puede realizar un ajuste fino\n"
-"del tama帽o utilizando las teclas de las flechas de su teclado.\n"
-"\n"
-"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
-"trav茅s de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
-"\n"
-"Cuando se selecciona una partici贸n, puede utilizar:\n"
-"\n"
-" * [Ctrl][C] para crear una partici贸n nueva (cuando est谩 seleccionada una\n"
-"partici贸n vac铆a);\n"
-"\n"
-" * [Ctrl][D] para borrar una partici贸n;\n"
-"\n"
-" * [Ctrl][M] para configurar el punto de montaje.\n"
-"\n"
-"Para obtener informaci贸n sobre los distintos tipos de sistemas de archivos\n"
-"disponibles, por favor lea el cap铆tulo acerca de ext2FS del \"Manual de\n"
-"Referencia\".\n"
-"\n"
-"Si est谩 instalando en una m谩quina PPC, querr谩 crear una peque帽a partici贸n\n"
-"HFS de \"bootstrap\" de al menos 1 MB que ser谩 utilizada por el cargador de\n"
-"arranque yaboot. Si opta por hacer la partici贸n un poco m谩s grande, digamos\n"
-"50 MB, puede ver que es un lugar 煤til para almacenar un n煤cleo y ramdisk\n"
-"alternativos para arrancar en situaciones de emergencia."
+msgid "Remove the logical volumes first\n"
+msgstr "Quite los vol煤menes l贸gicos primero\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"En este punto, DrakX le permitir谩 elegir el nivel de seguridad deseado para\n"
-"la m谩quina. Como regla general, el nivel de seguridad deber铆a ser mayor\n"
-"cuanto m谩s cruciales sean los datos que tenga almacenados, o si ser谩 una\n"
-"m谩quina directamente expuesta a la Internet. Sin embargo, un nivel de\n"
-"seguridad m谩s alto generalmente se obtiene a expensas de la facilidad de\n"
-"uso.\n"
-"\n"
-"Si no sabe que elegir, mantenga la opci贸n predeterminada."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Se va a iniciar la entrada resaltada en %d segundos."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Es probable que cuando instale Mandrake Linux algunos paquetes se hayan\n"
-"actualizado desde la publicaci贸n inicial. Se pueden haber corregido algunos\n"
-"errores, y solucionado problemas de seguridad. Para permitir que Usted se\n"
-"beneficie de estas actualizaciones, ahora se le propone transferirlas desde\n"
-"la Internet. Marque \"S铆\" si tiene funcionando una conexi贸n con la\n"
-"Internet, o \"No\" si prefiere instalar los paquetes actualizados m谩s\n"
-"tarde.\n"
-"\n"
-"Si elige \"S铆\" se mostrar谩 una lista de lugares desde los que se pueden\n"
-"obtener las actualizaciones. Elija el m谩s cercano a Usted. Luego aparece un\n"
-"谩rbol de selecci贸n de paquetes: revise la selecci贸n y presione \"Instalar\"\n"
-"para transferir e instalar los paquetes seleccionados, o \"Cancelar\" para\n"
-"abortar."
+"No se puede escribir /etc/sysconfig/bootsplash\n"
+"No se encuentra el archivo."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Acceso a Internet"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Se debe formatear cualquier partici贸n nueva que ha sido definida para que\n"
-"se pueda utilizar (formatear significa crear un sistema de archivos)\n"
-"\n"
-"Puede desear volver a formatear algunas particiones ya existentes para\n"
-"borrar cualquier dato que pudieran contener. Si as铆 lo desea, por favor\n"
-"seleccione tambi茅n dichas particiones.\n"
-"\n"
-"Por favor note que no es necesario volver a formatear todas las particiones\n"
-"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
-"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
-"volver a formatear particiones que contienen datos que desea preservar\n"
-"(t铆picamente \"/home\")\n"
-"\n"
-"Por favor, tenga sumo cuidado cuando selecciona las particiones. Despu茅s de\n"
-"formatear, se borrar谩n todos los datos en las particiones seleccionadas y\n"
-"no podr谩 recuperarlos en absoluto.\n"
-"\n"
-"Haga clic sobre \"Siguiente ->\" cuando est茅 listo para formatear las\n"
-"particiones.\n"
-"\n"
-"Haga clic sobre \"<- Anterior\" si desea elegir otra partici贸n para la\n"
-"instalaci贸n de su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Haga clic sobre \"Avanzada\" si desea seleccionar las particiones en las\n"
-"que se buscar谩n bloques defectuosos en el disco."
+"coordenada y del cuadro de texto\n"
+"en cantidad de caracteres"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Ya est谩. Ahora la instalaci贸n est谩 completa y su sistema GNU/Linux est谩\n"
-"listo para ser utilizado. Simplemente haga clic sobre \"Siguiente ->\" para\n"
-"volver a arrancar el sistema. Lo primero que deber铆a ver tan pronto como su\n"
-"m谩quina haya finalizado sus pruebas de hardware es el men煤 del cargador de\n"
-"arranque, d谩ndole la elecci贸n de cu谩l sistema operativo arrancar.\n"
-"\n"
-"El bot贸n \"Avanzada\" le muestra dos botones m谩s para:\n"
-"\n"
-" * \"Generar un disquete de instalaci贸n autom谩tica\": para crear un\n"
-"disquete de instalaci贸n que realizar谩 una instalaci贸n completa\n"
-"autom谩ticamente, sin la asistencia de un operador, similar a la instalaci贸n\n"
-"que ha configurado reci茅n.\n"
-"\n"
-" Note que hay dos opciones diferentes disponibles despu茅s de hacer clic\n"
-"sobre el bot贸n:\n"
-"\n"
-" * \"Reproducir\" . Esta es una instalaci贸n parcialmente automatizada.\n"
-"La etapa de particionado es el 煤nico procedimiento interactivo.\n"
-"\n"
-" * \"Automatizada\" . Instalaci贸n completamente automatizada: el disco\n"
-"r铆gido se sobreescribe por completo, y se pierden todos los datos.\n"
-"\n"
-" Esta caracter铆stica es muy 煤til cuando se instala una cantidad grande de\n"
-"m谩quinas similares. Consulte la secci贸n Auto install (en ingl茅s) en nuestro\n"
-"sitio web para m谩s informaci贸n.\n"
-"\n"
-" * \"Guardar selecci贸n de paquetes\"(*): guarda una lista de los paquetes\n"
-"seleccionados en esta instalaci贸n. Para usar esta selecci贸n con otra\n"
-"instalaci贸n, inserte el disquete en la disquetera y comience la\n"
-"instalaci贸n. En el prompt, presione la tecla [F1], y a continuaci贸n ingrese\n"
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
-"teclee \"mformat a:\")"
+"Para obtener una lista de las opciones disponibles para la impresora actual, "
+"haga clic en el bot贸n \"Imprimir lista de opciones\"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Activando los servidores..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Imprimir la(s) p谩gina(s) de prueba..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ya existe una partici贸n con el punto de montaje %s\n"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
@@ -2390,51 +2232,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Ahora necesita elegir el lugar de su disco r铆gido donde se instalar谩 su\n"
"sistema operativo Mandrake Linux. Si su disco r铆gido est谩 vac铆o o si un\n"
@@ -2453,345 +2293,177 @@ msgstr ""
"Dependiendo de la configuraci贸n de su disco r铆gido, est谩n disponibles\n"
"varias opciones:\n"
"\n"
-" * \"Usar espacio libre\": esta opci贸n simplemente llevar谩 a un\n"
-"particionado autom谩tico de su(s) disco(s) vac铆o(s). Si elige esta opci贸n,\n"
-"no se le pedir谩n m谩s detalles ni se le formular谩n m谩s preguntas.\n"
-"\n"
-" * \"Usar partici贸n existente\": el asistente ha detectado una o m谩s\n"
-"particiones Linux existentes en su disco r铆gido. Si desea utilizarlas,\n"
-"elija esta opci贸n. Entonces se le pedir谩 que elija los puntos de montaje\n"
-"asociados a cada una de las particiones. Los puntos de montaje legados se\n"
-"seleccionan autom谩ticamente, y por lo general deber铆a mantenerlos.\n"
-"\n"
-" * \"Usar el espacio libre en la partici贸n Windows\": si Microsoft Windows\n"
-"est谩 instalado en su disco r铆gido y ocupa todo el espacio disponible en el\n"
-"mismo, Usted tiene que liberar espacio para los datos de Linux. Para\n"
-"hacerlo, puede borrar su partici贸n y datos Microsoft Windows (vea la\n"
-"soluci贸n \"Borrar el disco completo\") o cambie el tama帽o de su partici贸n\n"
-"Microsoft Windows FAT. El cambio de tama帽o se puede realizar sin la p茅rdida\n"
-"de datos, siempre y cuando Usted haya desfragmentado con anterioridad la\n"
-"partici贸n Windows y que la misma utiliza el formato FAT. Es altamente\n"
-"recomendable hacer una copia de respaldo de sus datos.. Se recomienda usar\n"
-"esta soluci贸n si desea utilizar tanto Mandrake Linux como Microsoft Windows\n"
-"en la misma computadora.\n"
+" * \"%s\": esta opci贸n simplemente llevar谩 a un particionado autom谩tico de\n"
+"su(s) disco(s) vac铆o(s). Si elige esta opci贸n, no se le pedir谩n m谩s\n"
+"detalles ni se le formular谩n m谩s preguntas.\n"
+"\n"
+" * \"%s\": el asistente ha detectado una o m谩s particiones Linux existentes\n"
+"en su disco r铆gido. Si desea utilizarlas, elija esta opci贸n. Entonces se le\n"
+"pedir谩 que elija los puntos de montaje asociados a cada una de las\n"
+"particiones. Los puntos de montaje legados se seleccionan autom谩ticamente,\n"
+"y por lo general deber铆a mantenerlos.\n"
+"\n"
+" * \"%s\": si Microsoft Windows est谩 instalado en su disco r铆gido y ocupa\n"
+"todo el espacio disponible en el mismo, Usted tiene que liberar espacio\n"
+"para los datos de Linux. Para hacerlo, puede borrar su partici贸n y datos\n"
+"Microsoft Windows (vea la soluci贸n \"Borrar el disco completo\") o cambiar\n"
+"el tama帽o de su partici贸n Microsoft Windows FAT. El cambio de tama帽o se\n"
+"puede realizar sin la p茅rdida de datos, siempre y cuando Usted haya\n"
+"desfragmentado con anterioridad la partici贸n Windows y que la misma utiliza\n"
+"el formato FAT. Es altamente recomendable hacer una copia de respaldo de\n"
+"sus datos. Se recomienda usar esta soluci贸n si desea utilizar tanto\n"
+"Mandrake Linux como Microsoft Windows en la misma computadora.\n"
"\n"
" Antes de elegir esta opci贸n, por favor comprenda que despu茅s de este\n"
-"procedimiento, el tama帽o de su partici贸n Microsoft Windows ser谩 m谩s peque帽o\n"
+"procedimiento el tama帽o de su partici贸n Microsoft Windows ser谩 m谩s peque帽o\n"
"que cuando comenz贸. Tendr谩 menos espacio bajo Microsoft Windows para\n"
"almacenar sus datos o instalar software nuevo.\n"
"\n"
-" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
-"particiones presentes en su disco r铆gido y reemplazarlas con su nuevo\n"
-"sistema Mandrake Linux, elija esta opci贸n. Tenga cuidado con esta soluci贸n\n"
-"ya que no podr谩 revertir su elecci贸n despu茅s de confirmarla.\n"
+" * \"%s\": si desea borrar todos los datos y todas las particiones\n"
+"presentes en su disco r铆gido y reemplazarlos con su nuevo sistema Mandrake\n"
+"Linux, elija esta opci贸n. Tenga cuidado con esta soluci贸n ya que no podr谩\n"
+"revertir su elecci贸n despu茅s de confirmarla.\n"
"\n"
" !! Si elige esta opci贸n, se perder谩n todos los datos en su disco. !!\n"
"\n"
-" * \"Quitar Windows\": esto simplemente borrar谩 todo en el disco y\n"
-"comenzar谩 particionando todo desde cero. Se perder谩n todos los datos en su\n"
-"disco.\n"
+" * \"%s\": esto simplemente borrar谩 todo en el disco y comenzar谩\n"
+"particionando todo desde cero. Se perder谩n todos los datos en su disco.\n"
"\n"
" !! Si elige esta opci贸n, se perder谩n todos los datos en su disco. !!\n"
"\n"
-" * \"Particionamiento personalizado\": elija esta opci贸n si desea\n"
-"particionar manualmente su disco r铆gido. Tenga cuidado - esta es una\n"
-"elecci贸n potente pero peligrosa y puede perder todos sus datos con\n"
-"facilidad. Esa es la raz贸n por la cual esta opci贸n realmente s贸lo se\n"
-"recomienda si ha hecho algo como esto antes y tiene algo de experiencia.\n"
-"Para m谩s instrucciones acerca de la utilizaci贸n de el utilitario DiskDrake,\n"
-"consulte la secci贸n \"Administrar sus particiones\" de la \"Gu铆a de\n"
-"Comienzo\"."
+" * \"%s\": elija esta opci贸n si desea particionar manualmente su disco\n"
+"r铆gido. Tenga cuidado - esta es una elecci贸n potente pero peligrosa y puede\n"
+"perder todos sus datos con facilidad. Esa es la raz贸n por la cual esta\n"
+"opci贸n realmente s贸lo se recomienda si ha hecho algo como esto antes y\n"
+"tiene algo de experiencia. Para m谩s instrucciones acerca de la utilizaci贸n\n"
+"del utilitario DiskDrake, consulte la secci贸n \"Administrar sus\n"
+"particiones\" de la \"Gu铆a de Comienzo\"."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Opciones\n"
-"\n"
-" Aqu铆 puede elegir si desea que su m谩quina cambie autom谩ticamente a la\n"
-"interfaz gr谩fica al arrancar. Obviamente, querr谩 marcar \"No\" si su\n"
-"sistema actuar谩 como servidor, o si no tuvo 茅xito en la configuraci贸n de su\n"
-"pantalla."
+msgid "Ukraine"
+msgstr "Ucrania"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"En caso que est茅n disponibles diferentes servidores para su tarjeta, con o\n"
-"sin aceleraci贸n de 3D, entonces se le propone elegir el servidor que mejor\n"
-"satisface sus necesidades."
+msgid "Application:"
+msgstr "Aplicaci贸n:"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Resoluci贸n\n"
-"\n"
-" Aqu铆 puede elegir las resoluciones y profundidades de color entre\n"
-"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
-"necesidades (tenga presente que eso se puede cambiar luego de la\n"
-"instalaci贸n) En el monitor se muestra un ejemplo de la configuraci贸n\n"
-"elegida."
+msgid "External ISDN modem"
+msgstr "M贸dem RDSI externo"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar autom谩ticamente el\n"
-"monitor conectado a su m谩quina. Si este no es el caso, en esta lista puede\n"
-"elegir el monitor que realmente posee."
+msgid "if set to yes, report check result by mail."
+msgstr "si se pone en s铆, reportar resultado de verificaci贸n por correo-e."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "驴Su elecci贸n? (por defecto %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Soluci贸n de problemas"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / Regi贸n"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (por \"X Window System\") es el coraz贸n de la interfaz gr谩fica de\n"
-"GNU/Linux en el que se apoyan todos los entornos gr谩ficos (KDE, GNOME,\n"
-"AfterStep, WindowMaker, etc.) que se incluyen con Mandrake Linux.\n"
-"\n"
-"Se le presentar谩 la lista de par谩metros diferentes a cambiar para obtener\n"
-"una presentaci贸n gr谩fica 贸ptima: Tarjeta gr谩fica\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar autom谩ticamente la\n"
-"tarjeta gr谩fica instalada en su m谩quina. Si este no es el caso, en esta\n"
-"lista puede elegir la tarjeta que realmente posee.\n"
-"\n"
-" En caso que est茅n disponibles diferentes servidores para su tarjeta, con\n"
-"o sin aceleraci贸n de 3D, entonces se le propone elegir el servidor que\n"
-"mejor satisface sus necesidades.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar autom谩ticamente el\n"
-"monitor conectado a su m谩quina. Si este no es el caso, en esta lista puede\n"
-"elegir el monitor que realmente posee.\n"
-"\n"
-"\n"
-"\n"
-"Resoluci贸n\n"
-"\n"
-" Aqu铆 puede elegir las resoluciones y profundidades de color entre\n"
-"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
-"necesidades (tenga presente que eso se puede cambiar luego de la\n"
-"instalaci贸n) En el monitor se muestra un ejemplo de la configuraci贸n\n"
-"elegida.\n"
-"\n"
+"El probador de sonido cl谩sico va a ejecutar los comandos siguientes:\n"
"\n"
"\n"
-"Probar\n"
+"- \"lspcidrake -v | fgrep AUDIO\" le dir谩 qu茅 controlador predet. usa su\n"
+"tarjeta de sonido\n"
"\n"
-" El sistema intentar谩 abrir una pantalla gr谩fica con la resoluci贸n\n"
-"deseada. Si puede ver el mensaje durante la prueba, y responde \"S铆\",\n"
-"entonces DrakX continuar谩 con el paso siguiente. Si no puede ver el\n"
-"mensaje, significa que alguna parte de la configuraci贸n detectada\n"
-"autom谩ticamente no era la correcta y la prueba terminar谩 autom谩ticamente\n"
-"luego de 12 segundos, restaurando el men煤. Cambie los ajustes hasta obtener\n"
-"una pantalla correcta.\n"
+"- \"grep sound-slot /etc/modules.conf\n"
+"\" le dir谩 qu茅 controlador usa la misma\n"
+"en este momento\n"
"\n"
+"- \"/sbin/lsmod\" le permitir谩 verificar si su m贸dulo (controlador) est谩\n"
+"cargado o no\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" y \"/sbin/chkconfig --list alsa\" le "
+"dir谩\n"
+"si los servicios alsa y sonido est谩n configurados para correr en el nivel\n"
+"de ejecuci贸n 3\n"
"\n"
-"Opciones\n"
+"- \"aumix -q\" le dir谩 si el volumen del sonido est谩 mudo o no\n"
"\n"
-" Aqu铆 puede elegir si desea que su m谩quina cambie autom谩ticamente a la\n"
-"interfaz gr谩fica al arrancar. Obviamente, querr谩 marcar \"No\" si su\n"
-"sistema actuar谩 como servidor, o si no tuvo 茅xito en la configuraci贸n de su\n"
-"pantalla."
+"- \"/sbin/fuser -v /dev/dsp\" le dir谩 qu茅 programa utiliza la tarjeta de "
+"sonido.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Tarjeta gr谩fica\n"
-"\n"
-" Normalmente el instalador puede detectar y configurar autom谩ticamente la\n"
-"tarjeta gr谩fica instalada en su m谩quina. Si este no es el caso, en esta\n"
-"lista puede elegir la tarjeta que realmente posee.\n"
+"La(s) p谩gina(s) de prueba se enviaron a la impresora.\n"
+"Puede que pase algo de tiempo antes de que comience la impresi贸n.\n"
+"Estado de la impresi贸n:\n"
+"%s\n"
"\n"
-" En caso que est茅n disponibles diferentes servidores para su tarjeta, con\n"
-"o sin aceleraci贸n de 3D, entonces se le propone elegir el servidor que\n"
-"mejor satisface sus necesidades."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
-"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
-"horario que Usted seleccion贸. Sin embargo, es posible desactivar esto\n"
-"quitando la marca de la casilla \"Reloj interno puesto a GMT\", lo que har谩\n"
-"que GNU/Linux sepa que el reloj del sistema y el reloj de hardware est谩n en\n"
-"el mismo huso horario. Esto es 煤til cuando la m谩quina tambi茅n alberga otro\n"
-"sistema operativo como Windows.\n"
-"\n"
-"La opci贸n \"Sincronizaci贸n autom谩tica de hora (usando NTP)\" regular谩\n"
-"autom谩ticamente el reloj conect谩ndose a un servidor remoto de la hora en la\n"
-"Internet. Para que esta caracter铆stica funcione, debe tener una conexi贸n\n"
-"con la Internet funcionando. En realidad, esta opci贸n instala un servidor\n"
-"de la hora que puede ser utilizado por otras m谩quinas en su red local."
+msgid "daily"
+msgstr "cada d铆a"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Este di谩logo se usa para elegir los servicios que desea iniciar durante el\n"
-"arranque.\n"
-"\n"
-"DrakX listar谩 todos los servicios disponibles con la instalaci贸n corriente.\n"
-"Debe revisarlos con cuidado y quitar la marca de aquellos que no siempre\n"
-"son necesarios al arrancar.\n"
-"\n"
-"Cuando se selecciona un servicio obtendr谩 un peque帽o texto explicativo\n"
-"acerca del mismo. Sin embargo, si no est谩 seguro si un servicio es 煤til o\n"
-"no, es m谩s seguro dejar el comportamiento predeterminado.\n"
-"\n"
-"!! Tenga mucho cuidado en esta etapa si pretende usar su m谩quina como un\n"
-"servidor: probablemente no desear谩 arrancar servicios que no necesita. Por\n"
-"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
-"en un servidor. En general, seleccione s贸lo aquellos servicios que\n"
-"realmente necesita. !!"
+msgid "and one unknown printer"
+msgstr "y una impresora desconocida est谩 "
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Impresora\": al hacer clic sobre el bot贸n \"Configurar\" se abrir谩 el\n"
-"asistente de configuraci贸n de la impresora. Consulte el cap铆tulo\n"
-"correspondiente de la \"Gu铆a de Comienzo\" para m谩s informaci贸n sobre c贸mo\n"
-"configurar una impresora nueva. La interfaz presentada all铆 es similar a la\n"
-"utilizada durante la instalaci贸n."
+msgid "Ireland"
+msgstr "Irlanda"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "versi贸n del n煤cleo"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Configuraci贸n de la restauraci贸n"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "驴Es esta la configuraci贸n correcta?"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
@@ -2799,11 +2471,11 @@ msgstr ""
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2817,15 +2489,14 @@ msgid ""
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
-"Ahora se le propone configurar su conexi贸n de red/Internet. Si desea\n"
-"conectar su computadora a la Internet o a una red de 谩rea local, haga clic\n"
-"sobre \"Siguiente ->\". Mandrake Linux intentar谩 detectar autom谩ticamente\n"
-"los dispositivos de red y m贸dems. Si esta detecci贸n falla, quite la marca\n"
-"de la casilla \"Usar detecci贸n autom谩tica\". Tambi茅n puede elegir no\n"
-"configurar la red, o hacerlo m谩s tarde, en cuyo caso hacer clic sobre el\n"
-"bot贸n \"Cancelar\" lo llevar谩 al paso siguiente.\n"
+"Ahora se le propone configurar su conexi贸n de red/Internet. Haga clic sobre\n"
+"\"%s\" si desea conectar su computadora a la Internet o a una red de 谩rea\n"
+"local. Mandrake Linux intentar谩 detectar autom谩ticamente los dispositivos\n"
+"de red y m贸dems. Si esta detecci贸n falla, quite la marca de la casilla\n"
+"\"%s\". Tambi茅n puede elegir no configurar la red, o hacerlo m谩s tarde, en\n"
+"cuyo caso hacer clic sobre el bot贸n \"%s\" lo llevar谩 al paso siguiente.\n"
"\n"
-"Cuando configura su red, los tipos de conexi贸n disponibles son: m贸dem\n"
+"Cuando configura su red los tipos de conexi贸n disponibles son: m贸dem\n"
"tradicional, m贸dem RDSI (ISDN), conexi贸n ADSL, cable m贸dem, y finalmente\n"
"una simple conexi贸n LAN (Ethernet).\n"
"\n"
@@ -2840,4688 +2511,4411 @@ msgstr ""
"hasta que su sistema est茅 instalado y usar el programa que se describe all铆\n"
"para configurar su conexi贸n."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Si le dijo al instalador que deseaba seleccionar los paquetes individuales,\n"
-"el mismo presentar谩 un 谩rbol que contiene todos los paquetes clasificados\n"
-"por grupos y subgrupos. Mientras navega por el 谩rbol, puede seleccionar\n"
-"grupos enteros, subgrupos, o paquetes individuales.\n"
-"\n"
-"Tan pronto como selecciona un paquete en el 谩rbol, aparece una descripci贸n\n"
-"del mismo sobre la derecha que le permite conocer el prop贸sito del paquete.\n"
-"\n"
-"Es muy probable que la gran mayor铆a de las descripciones de los paquetes\n"
-"est茅n en ingl茅s.\n"
-"\n"
-"!! Si ha sido seleccionado un paquete de servidor ya sea porque Usted\n"
-"seleccion贸 espec铆ficamente el paquete individual o porque el mismo era\n"
-"parte de un grupo de paquetes, se le pedir谩 que confirme que realmente\n"
-"desea que se instalen esos servidores. Bajo Mandrake Linux, cualquier\n"
-"servidor instalado se inicia de manera predeterminada al momento del\n"
-"arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
-"momento en que se public贸 la distribuci贸n, es posible que se descubran\n"
-"vulnerabilidades en la seguridad luego que se termin贸 con esta versi贸n de\n"
-"Mandrake Linux. En particular, si no sabe que es lo que se supone que hace\n"
-"un servicio o la raz贸n por la cual se est谩 instalando, entonces haga clic\n"
-"sobre \"No\". Si hace clic sobre \"S铆\" se instalar谩n todos los servicios\n"
-"listados y de manera predeterminada los mismos arrancar谩n autom谩ticamente.\n"
-"!!\n"
-"\n"
-"La opci贸n \"Dependencias autom谩ticas\" simplemente deshabilita el di谩logo\n"
-"de advertencia que aparece cuando el instalador selecciona autom谩ticamente\n"
-"un paquete para resolver un problema de dependencias. Algunos paquetes\n"
-"tienen relaciones entre ellos tales que la instalaci贸n de un paquete\n"
-"necesita que alg煤n otro programa ya est茅 instalado. El instalador puede\n"
-"determinar qu茅 paquetes se necesitan para satisfacer una dependencia para\n"
-"completar la instalaci贸n de manera satisfactoria.\n"
-"\n"
-"El peque帽o icono del disquete al final de la lista le permite cargar la\n"
-"lista de paquetes elegida durante una instalaci贸n previa. Esto es 煤til si\n"
-"Usted tiene una cantidad de m谩quinas que desea configurar de manera\n"
-"id茅ntica. Haga clic sobre este icono y se le pedir谩 que inserte un disquete\n"
-"creado con anterioridad al final de otra instalaci贸n. Vea el segundo\n"
-"consejo del 煤ltimo paso para informaci贸n sobre como crear dicho disquete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ahora es el momento de especificar los programas que desea instalar en su\n"
-"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y para\n"
-"hacer m谩s simple el manejo de los paquetes, los mismos se han puesto en\n"
-"grupos de aplicaciones similares.\n"
-"\n"
-"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
-"su m谩quina. Mandrake Linux tiene cuatro instalaciones predefinidas\n"
-"disponibles. Puede pensar en estas clases de instalaci贸n como contenedores\n"
-"para los distintos paquetes. Puede mezclar y hacer coincidir aplicaciones\n"
-"de varios contenedores, por lo que una instalaci贸n de \"Estaci贸n de\n"
-"trabajo\" puede tener instaladas aplicaciones del contenedor\n"
-"\"Desarrollo\".\n"
-"\n"
-" * \"Estaci贸n de trabajo\": si planifica utilizar su m谩quina como una\n"
-"estaci贸n de trabajo, seleccione una o m谩s aplicaciones del contenedor\n"
-"estaci贸n de trabajo.\n"
-"\n"
-" * \"Desarrollo\": si la m谩quina se utilizar谩 para programaci贸n, elija los\n"
-"paquetes apropiados del contenedor.\n"
-"\n"
-" * \"Servidor\": si pretende usar la m谩quina como un servidor, seleccione\n"
-"cu谩les de los servicios m谩s comunes desea instalar en su m谩quina.\n"
-"\n"
-" * \"Entorno gr谩fico\": aqu铆 es donde seleccionar谩 su entorno gr谩fico\n"
-"preferido. Si desea tener una estaci贸n de trabajo gr谩fica, debe seleccionar\n"
-"al menos uno.\n"
-"\n"
-"Si mueve el cursor del rat贸n sobre el nombre de un grupo se mostrar谩 un\n"
-"peque帽o texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
-"grupos cuando est谩 realizando una instalaci贸n regular (es decir, no una\n"
-"actualizaci贸n), aparecer谩 un di谩logo que propone opciones diferentes para\n"
-"una instalaci贸n m铆nima:\n"
-"\n"
-" * \"Con X\": instala la menor cantidad de paquetes posible para tener un\n"
-"escritorio gr谩fico que funcione.\n"
-"\n"
-" * \"Con documentaci贸n b谩sica\": instala el sistema base m谩s algunos\n"
-"utilitarios b谩sicos y la documentaci贸n de los mismos. Esta instalaci贸n es\n"
-"adecuada para configurar un servidor.\n"
-"\n"
-" * \"Instalaci贸n realmente m铆nima\": instalar谩 el m铆nimo necesario estricto\n"
-"para obtener un sistema Linux que funciona. Con esta instalaci贸n s贸lo\n"
-"tendr谩 una interfaz de l铆nea de comandos. Esta instalaci贸n ocupa alrededor\n"
-"de 65 MB.\n"
-"\n"
-"Puede marcar la casilla \"Selecci贸n de paquetes individuales\" que es 煤til\n"
-"si est谩 familiarizado con los paquetes que se ofrecen o si desea tener un\n"
-"control total sobre lo que se instalar谩.\n"
-"\n"
-"Si inici贸 la instalaci贸n en el modo \"Actualizaci贸n\", puede deseleccionar\n"
-"todos los grupos para evitar instalar cualquier paquete nuevo. Esto es 煤til\n"
-"para reparar o actualizar un sistema existente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"La instalaci贸n de Mandrake Linux se divide en varios CD-ROM. DrakX sabe si\n"
-"un paquete seleccionado se encuentra en otro CD por lo que expulsar谩 el CD\n"
-"corriente y le pedir谩 que inserte el CD correcto cuando sea necesario."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aqu铆 se listan las particiones Linux existentes que se detectaron en su\n"
-"disco r铆gido. Puede mantener las elecciones hechas por el asistente, ya que\n"
-"las mismas son buenas para las instalaciones m谩s comunes. Si hace cambios,\n"
-"al menos debe definir una partici贸n ra铆z (\"/\"). No elija una partici贸n\n"
-"muy peque帽a o no podr谩 instalar software suficiente. Si desea almacenar sus\n"
-"datos en una partici贸n separada, tambi茅n puede necesitar crear una\n"
-"partici贸n para \"/home\" (s贸lo es posible si tiene m谩s de una partici贸n\n"
-"Linux disponible)\n"
-"\n"
-"Cada partici贸n se lista como sigue: \"Nombre\", \"Capacidad\".\n"
-"\n"
-"\"Nombre\" est谩 estructurado: \"tipo de disco r铆gido\", \"n煤mero de disco\n"
-"r铆gido\", \"n煤mero de partici贸n\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco r铆gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"N煤mero de disco r铆gido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco r铆gido maestro en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"b\" significa \"disco r铆gido esclavo en la controladora IDE\n"
-"primaria\",\n"
-"\n"
-" * \"c\" significa \"disco r铆gido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco r铆gido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
-"puede tener sus preferencias propias, sus archivos propios, y as铆\n"
-"sucesivamente. Puede leer la \"Gu铆a de Comienzo\" para aprender m谩s. Pero,\n"
-"a diferencia de \"root\", que es el administrador del sistema, los usuarios\n"
-"que agregue en este punto no estar谩n autorizados a cambiar nada excepto su\n"
-"configuraci贸n y sus archivos propios, protegiendo al sistema contra cambios\n"
-"no intencionales o maliciosos que pueden impactar al sistema como un todo.\n"
-"Tendr谩 que crear al menos un usuario no privilegiado para Usted mismo - esa\n"
-"cuenta es la que deber铆a utilizar para el uso rutinario, diario. Aunque es\n"
-"muy pr谩ctico ingresar como \"root\" para cualquier cosa y de todo, 隆tambi茅n\n"
-"puede ser muy peligroso! Un error podr铆a significar que su sistema deje de\n"
-"funcionar. Si comete un error serio como usuario no privilegiado, s贸lo\n"
-"puede llegar a perder algo de informaci贸n, pero no afectar a todo el\n"
-"sistema.\n"
-"\n"
-"El primer campo le pide un nombre real. Por supuesto, esto no es\n"
-"obligatorio - en realidad, puede ingresar lo que desee. DrakX usar谩 la\n"
-"primer palabra que ingres贸 y la copiar谩 al campo \"Nombre de usuario\", que\n"
-"es el nombre que este usuario en particular usar谩 para ingresar al sistema.\n"
-"Si lo desea, puede omitir lo predeterminado y cambiar el nombre de usuario.\n"
-"El pr贸ximo paso es ingresar una contrase帽a. La contrase帽a de un usuario no\n"
-"privilegiado (regular) no es tan crucial como la de \"root\" desde el punto\n"
-"de vista de la seguridad, pero esto no es raz贸n alguna para obviarla o\n"
-"hacerla muy simple: despu茅s de todo, son sus archivos los que podr铆an estar\n"
-"en peligro.\n"
-"\n"
-"Una vez que hace clic sobre \"Aceptar usuario\", puede agregar otros\n"
-"usuarios. Agregue un usuario para cada uno de sus amigos: por ejemplo su\n"
-"padre o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
-"desee, haga clic sobre \"Siguiente ->\".\n"
-"\n"
-"Hacer clic sobre el bot贸n \"Avanzada\" le permite cambiar el \"shell\"\n"
-"predeterminado para ese usuario (bash, por defecto)\n"
-"\n"
-"Cuando haya finalizado de a帽adir todos los usuarios, se le propone elegir\n"
-"un usuario para conectarse autom谩ticamente en el sistema cuando arranca la\n"
-"computadora. Si est谩 interesado en esa caracter铆stica (y no le importa\n"
-"mucho la seguridad local), elija el usuario y administrador de ventanas\n"
-"deseado, luego haga clic sobre \"Siguiente ->\". Si no est谩 interesado en\n"
-"esta caracter铆stica, quite la marca de la casilla \"驴Desea utilizar esta\n"
-"caracter铆stica?\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Antes de continuar, deber铆a leer cuidadosamente los t茅rminos de la\n"
-"licencia. La misma cubre a toda la distribuci贸n Mandrake Linux. Si acepta\n"
-"con todos los t茅rminos en la misma, marque la casilla \"Aceptar\". Si no,\n"
-"simplemente apague su computadora."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "T煤 tambi茅n debes formatear %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No se puede acceder a los m贸dulos del n煤cleo correspondientes a su n煤cleo "
-"(no se encuentra el archivo %s), esto generalmente significa que su disquete "
-"de arranque no contiene un n煤cleo de misma versi贸n que el soporte de "
-"instalaci贸n (haga un nuevo disquete de arranque por favor)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocurri贸 un error - no se encontr贸 ning煤n dispositivo v谩lido para crear los "
-"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
-"raz贸n de este fallo"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error al leer el archivo %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para utilizar esta selecci贸n de paquetes salvada, arranque la instalaci贸n "
-"con \"linux defcfg=floppy\""
+msgid "Wizard Configuration"
+msgstr "Configuraci贸n del Asistente"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Este disquete no est谩 formateado con FAT"
+msgid "Autoprobe"
+msgstr "Autodetecci贸n"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
+msgid "Backup system files..."
+msgstr "Respaldar archivos del sistema..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "No se puede usar difusi贸n sin un dominio NIS"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Se quitar谩n los paquetes siguientes para permitir actualizar su sistema: %s\n"
-"\n"
-"\n"
-"驴Realmente desea quitar estos paquetes?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "No"
+msgid "Removing printer \"%s\"..."
+msgstr "Quitando la impresora \"%s\" ..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "S铆"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Ha seleccionado el/los siguientes servidores: %s\n"
-"\n"
-"\n"
-"Estos servidores se activan por defecto. No se les conocen problemas de\n"
-"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, debe "
-"asegurarse de\n"
-"actualizarlos tan pronto como sea posible.\n"
+"Por favor indique donde se encuentra el archivo auto_install.cfg.\n"
"\n"
+"D茅jelo en blanco si no desea configurar el modo de instalaci贸n autom谩tica.\n"
"\n"
-"驴Realmente desea instalar estos servidores?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Configuraci贸n del sistema"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Instalaci贸n del sistema"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Bajando la red"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
+"Nivel de informaci贸n que se puede obtener por medio de la instrucci贸n cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Levantando la red"
+msgid "Peru"
+msgstr "Per煤"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Fall贸 el particionamiento: %s"
+msgid " on device: %s"
+msgstr " en el dispositivo: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"El asistente de particionamiento de DrakX encontr贸 las siguientes soluciones:"
+msgid "Remove Windows(TM)"
+msgstr "Quitar Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "No se puede encontrar nada de espacio para instalar"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Inicia el servidor de tipograf铆as X11 (obligatorio para correr XFree)."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Ahora puede particionar %s.\n"
-"Cuando haya terminado, no se olvide de guardar usando 'w'"
+"La mayor铆a de estos valores se tomaron\n"
+"de su sistema actual.\n"
+"Los puede modificar si es necesario."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Usar fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"Seleccione el archivo o directorio de tipograf铆as y haga clic sobre 'Agregar'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Particionamiento de disco personalizado"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Se perder谩n TODAS las particiones y sus datos en la unidad %s"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tiene m谩s de un disco r铆gido, 驴sobre cu谩l desea instalar Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Cron todav铆a no est谩 disponible como no-root"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Borrar el disco entero"
+msgid "System"
+msgstr "Sistema"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Quitar Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "驴Desea usar esta caracter铆stica?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"No hay particiones FAT para redimensionar (o no queda espacio suficiente)"
+msgid "Arabic"
+msgstr "Ar谩bico"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Para asegurar la integridad de los datos luego de cambiar el tama帽o a\n"
-"las particiones, se pueden ejecutar verificaciones de los sist. de archivos\n"
-"la pr贸xima vez que arranque en Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Fall贸 el redimensionado de la FAT: %s"
+"\n"
+"- Opciones:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Calculando los l铆mites del sistema de archivos Windows"
+msgid "Password required"
+msgstr "Se necesita contrase帽a"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Redimensionando"
+msgid "%d minutes"
+msgstr "%d minutos"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "partici贸n %s"
+msgid "Graphics card: %s"
+msgstr "Tarjeta gr谩fica: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "驴Qu茅 tama帽o desea conservar para Windows en la"
+msgid "WebDAV transfer failed!"
+msgstr "隆Fall贸 la transferencia WebDAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"隆ADVERTENCIA!\n"
-"\n"
-"Ahora DrakX cambiar谩 el tama帽o de su partici贸n Windows. Proceda con "
-"cuidado:\n"
-"esta operaci贸n es peligrosa. Si a煤n no lo hizo, primero deber铆a salir de\n"
-"la instalaci贸n, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
-"defrag),\n"
-"y luego volver a iniciar la instalaci贸n. Tambi茅n deber铆a hacer una copia de\n"
-" seguridad de sus datos.\n"
-"Cuando est茅 seguro, pulse sobre Aceptar."
+msgid "XFree configuration"
+msgstr "Configuraci贸n de XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Su partici贸n Windows est谩 muy fragmentada, por favor primero ejecute \"defrag"
-"\""
+msgid "Choose action"
+msgstr "Elija una acci贸n"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Calculando el espacio de la partici贸n Windows"
+msgid "French Polynesia"
+msgstr "Polinesia Francesa"
-#: ../../install_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"El redimensionador de tama帽o de la FAT no puede gestionar su partici贸n, \n"
-"ocurri贸 el error siguiente: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "驴A qu茅 partici贸n desea cambiarle el tama帽o?"
+"Por lo general, DrakX no tiene problemas en detectar la cantidad de botones\n"
+"que tiene su rat贸n. En caso contrario, asume que Usted tiene un rat贸n de\n"
+"dos botones y lo configurar谩 para que emule el tercer bot贸n. El tercer\n"
+"bot贸n del rat贸n de un rat贸n de dos botones se puede \"presionar\" haciendo\n"
+"clic simult谩neamente sobre el bot贸n izquierdo y el derecho. DrakX sabr谩\n"
+"autom谩ticamente si su rat贸n utiliza una interfaz PS/2, serie o USB.\n"
+"\n"
+"Si, por alguna raz贸n, desea especificar un tipo de rat贸n diferente,\n"
+"selecci贸nelo de la lista que se proporciona.\n"
+"\n"
+"Si elige un rat贸n distinto al predeterminado, se le presentar谩 una pantalla\n"
+"de prueba. Use los botones y la rueda para verificar que la configuraci贸n\n"
+"es correcta y que el rat贸n est谩 funcionando correctamente. Si el rat贸n no\n"
+"est谩 funcionando bien, presione la barra espaciadora o [Intro] para\n"
+"cancelar la prueba y volver a la lista de opciones.\n"
+"\n"
+"Los ratones con rueda a veces no se detectan autom谩ticamente por lo que\n"
+"deber谩 seleccionar su rat贸n de una lista. Debe asegurarse de seleccionar el\n"
+"correspondiente al puerto en el cual est谩 conectado su rat贸n. Despu茅s de\n"
+"seleccionar un rat贸n y presionar el bot贸n \"%s\", se muestra una imagen de\n"
+"un rat贸n en la pantalla. Mueva la rueda de su rat贸n para asegurarse que\n"
+"est谩 activa correctamente. Una vez que ve que se mueve la rueda en la\n"
+"pantalla a medida que mueve la rueda de su rat贸n, pruebe los botones y\n"
+"verifique que el puntero del rat贸n se mueve en la pantalla a medida que\n"
+"mueve su rat贸n."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Usar el espacio libre de la partici贸n Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Admitir las win-impresoras OKI 4w y compatibles."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
-"No hay particiones FAT para usar como loopback (o no queda espacio "
-"suficiente)"
+"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Tama帽o de la partici贸n de intercambio en MB: "
+msgid "Installing driver for %s card %s"
+msgstr "Instalando controlador para la tarjeta %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Tama帽o de la partici贸n ra铆z en MB: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Ha transferido su impresora por defecto anterior (\"%s\"), 驴Deber铆a ser "
+"tambi茅n la impresora por defecto bajo el nuevo sistema de impresi贸n %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Elija los tama帽os"
+msgid "Enable Server"
+msgstr "Habiltar el Servidor"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "驴Qu茅 partici贸n desea usar para Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ucraniano"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Usar la partici贸n de Windows para loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
+"verifique su configuraci贸n y su hardware. Luego, intente configurar su "
+"impresora remota de nuevo."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "No hay ninguna partici贸n existente para usar"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Usar la partici贸n existente"
+msgid "Local network(s)"
+msgstr "Red(es) local(es)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Quitar Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Usar el espacio libre"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Su %s ha sido configurado.\n"
+"Ahora puede escanear documentos usando \"XSane\" desde Multimedios/Gr谩ficos "
+"en el men煤 de aplicaciones."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe tener una partici贸n FAT montada en /boot/efi"
+msgid "Firewire controllers"
+msgstr "Controladores Firewire"
-#: ../../install_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"No dispone de una partici贸n de intercambio\n"
+"Luego que haya configurado los par谩metros generales del cargador de\n"
+"arranque se mostrar谩 la lista de opciones de arranque que estar谩n\n"
+"disponibles al momento de arrancar.\n"
"\n"
-"驴Desea continuar de todas formas?"
+"Si hay otros sistemas operativos instalados en su m谩quina los mismos se\n"
+"agregar谩n autom谩ticamente al men煤 de arranque. Aqu铆 puede elegir ajustar\n"
+"las opciones existentes haciendo clic sobre \"%s\" para crear una nueva\n"
+"entrada; seleccionando una entrada y haciendo clic sobre \"%s\" o \"%s\"\n"
+"para modificarla o quitarla. \"%s\" valida sus cambios.\n"
+"\n"
+"Tambi茅n puede ser que no desee dar acceso a los otros sistemas operativos a\n"
+"cualquiera que vaya a la consola y reinicie la m谩quina. Puede borrar las\n"
+"entradas correspondientes para los sistemas operativos para quitarlas del\n"
+"men煤, pero 隆necesitar谩 un disquete de arranque para poder arrancar esos\n"
+"otros sistemas operativos!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Debe tener una partici贸n ra铆z.\n"
-"Para ello, cree una partici贸n (o haga clic sobre una que ya existe).\n"
-"Luego elija la acci贸n \"Punto de montaje\" y def铆nalo como '/'"
+msgid "System mode"
+msgstr "Modo del sistema"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Alg煤n hardware de su computadora necesita controladores \"propietarios\" "
-"para funcionar.\n"
-"Puede encontrar informaci贸n sobre ellos en: %s"
+"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
+"servidor de impresi贸n NetWare (隆Note que puede no ser el mismo que el nombre "
+"de la m谩quina en TCP/IP) as铆 como el nombre de la cola de impresi贸n que "
+"desea usar y el nombre de usuario y la contrase帽a apropiados."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicidades, la instalaci贸n est谩 completa.\n"
-"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
-"\n"
-"Para obtener informaci贸n sobre correcciones disponibles para esta versi贸n\n"
-"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Hay informaci贸n disponible sobre c贸mo configurar su sistema en el cap铆tulo "
-"de\n"
-"configuraci贸n tras la instalaci贸n de la gu铆a de usuario oficial de Mandrake "
-"Linux."
+msgid "Netmask:"
+msgstr "M谩scara de red:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "A帽adir"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
+"remotas)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Cuando se activa esta opci贸n, cada vez que se inicia CUPS se asegura de "
+"manera autom谩tica que\n"
"\n"
-"Importante\n"
-"\n"
-"Haga el favor de leer cuidadosamente el presente documento. En caso de "
-"desacuerdo\n"
-"con el presente documento, no est谩 autorizado a instalar los dem谩s\n"
-"CD. En este caso seleccione 'Rechazar' para seguir la instalaci贸n sin\n"
-"estos CD.\n"
-"\n"
+"- si est谩 instalado LPD/LPRng, CUPS no sobreescribir谩 /etc/printcap\n"
"\n"
-"Algunos componentes de software contenidos en los siguientes CD no\n"
-"est谩n sometidos a las licencias GPL o similares que permitan la copia,\n"
-"adaptaci贸n o redistribuci贸n. Cada uno de los componentes de software\n"
-"esta distribuido bajo los t茅rminos y condiciones de un acuerdo de\n"
-"licencia propio. Por favor, dir谩jase a 茅ste y ac茅ptelo antes de instalarlo,\n"
-"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
-"copia (salvo las destinadas a copias de seguridad), la distribuci贸n, "
-"descompilaci贸n,\n"
-"desensamblado, ingenier铆a inversa, reconstituci贸n de la l贸gica del\n"
-"programa y/o modificaci贸n, salvo en la medida y para las necesidades\n"
-"autorizadas por las leyes vigentes. Toda violaci贸n de la licencia\n"
-"vigente implica generalmente la caducidad de est谩, sin perjuicio a\n"
-"todos los dem谩s derechos o acciones dirigidos en contra de Ud. Salvo si\n"
-"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
-"en m谩s de una m谩quina, ni adaptarlos para un uso en red. Si fuese\n"
-"necesario, contacte con el distribuidor de cada programa para\n"
-"obtener licencias adicionales. La distribuci贸n a terceros de copias de\n"
-"los programas o de la documentaci贸n que lo acompa帽a generalmente\n"
-"suele estar prohibida.\n"
+"- si falta /etc/cups/cupsd.conf, ser谩 creado\n"
"\n"
+"- cuando la informaci贸n de la impresora se difunde, no contiene \"localhost"
+"\" como nombre del servidor.\n"
"\n"
-"Todos los derechos, t铆tulos e intereses de esos programas son la\n"
-"propiedad exclusiva de sus autores respectivos y est谩n protegidos por el\n"
-"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
-"del software.\n"
+"Si alguna de esas medidas lo pone en problemas, apague esta opci贸n, pero "
+"entonces, tiene que ocuparse de estos puntos."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"EL PRESENTE TEXTO ES UNA TRADUCCI脫N A PROP脫SITO EXCLUSIVAMENTE\n"
-"INFORMATIVO DE LOS T脡RMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
-"NING脷N CASO LA PRESENTE TRADUCCI脫N TIENE VALOR LEGAL SIENDO OFICIAL\n"
-"EXCLUSIVAMENTE LA VERSI脫N EN FRANC脡S DE LA LICENCIA DE LINUX-MANDRAKE.\n"
-"No obstante, esperamos que esta traducci贸n ayudar谩 a los que hablan\n"
-"castellano a entenderla mejor.\n"
-"\n"
-"\n"
-"Introducci贸n\n"
-"\n"
-"El conjunto de elementos que incluye el sistema operativo y los\n"
-"diferentes componentes disponibles en la distribuci贸n Mandrake Linux\n"
-"se denominar谩n en adelante \"Programas\". Los programas incluyen en\n"
-"particular, pero de manera no limitativa, el conjunto de programas,\n"
-"procedimientos, reglas y documentaciones relativas al sistema\n"
-"operativo y a los diferentes componentes de la distribuci贸n\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licencia\n"
-"\n"
-"Le rogamos leer cuidadosamente este documento. 脡ste constituye un\n"
-"contrato de licencia entre Ud. (persona f铆sica o persona moral) y\n"
-"MandrakeSoft S.A. aplicado a los programas. El hecho de instalar, \n"
-"duplicar o usar los programas de cualquier manera, indica\n"
-"que acepta expl铆citamente los t茅rminos y condiciones de esta licencia\n"
-"y que est谩 totalmente de acuerdo en lo referente a los t茅rminos de la "
-"misma.\n"
-"En caso de no estar de acuerdo con el presente documento, no est谩\n"
-"autorizado a instalar, duplicar ni usar de ninguna manera\n"
-"este producto. El contrato de licencia sera autom谩ticamente anulado\n"
-"sin aviso previo en el caso que no se cumplan las disposiciones\n"
-"de este documento. En caso de anulaci贸n Ud. tendr谩 que anular\n"
-"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
-"y de todas las documentaciones que constituyen el sistema operativo y\n"
-"los diferentes componentes disponibles en en la distribuci贸n\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garant铆a y limitaciones de garant铆a\n"
-"\n"
-"Los programas y la documentaci贸n que los acompa帽a son proporcionados\n"
-"tal cual y sin ninguna garant铆a. MandrakeSoft S.A.\n"
-"no se responsabiliza de las consecuencias de un da帽o directo,\n"
-"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
-"relaci贸n con la utilizaci贸n de los programas, en particular y de\n"
-"manera no limitada, todos da帽os resultados por perdidas de\n"
-"beneficio, interrupci贸n de actividad, p茅rdida de informaciones\n"
-"comerciales u otras perdidas financieras, as铆 que por eventuales\n"
-"condenaciones e indemnizaciones debidas como consecuencia de una decisi贸n "
-"de\n"
-"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
-"la\n"
-"aparici贸n o eventualidad de tales da帽os.\n"
-"\n"
-"ADVERTENCIA EN CUANTO A LA POSESI脫N O USO DE PROGRAMAS PROHIBIDOS\n"
-"EN CIERTOS PA脥SES\n"
-"\n"
-"En ning煤n caso, ni MandrakeSoft S.A. ni sus proveedores podr谩n ser\n"
-"responsabilizados por un perjuicio especial, directo, indirecto o\n"
-"accesorio, de cualquier naturaleza (en particular y de manera\n"
-"no limitada, p茅rdidas de beneficio, interrupci贸n de actividad,\n"
-"p茅rdida de informaciones comerciales u otras p茅rdidas financieras, as铆\n"
-"como por posibles condenaciones e indemnizaciones debidas\n"
-"consecuentes a una decisi贸n de justicia) que resultar铆a de la\n"
-"utilizaci贸n, detenci贸n o simple descarga desde uno de los sitios de\n"
-"transferencia de Mandrake Linux de programas prohibidos por la\n"
-"legislaci贸n a la que est谩 sometido. Esta advertencia se aplica en\n"
-"particular a algunos componentes de criptograf铆a fuerte inclu铆dos en los\n"
-"programas.\n"
-"\n"
-"\n"
-"3. Licencia GPL y otras licencias\n"
-"\n"
-"Los Programas est谩n constituidos por m贸dulos de programas creados por\n"
-"diversas personas (f铆sicas o legales). Muchos de ellos se\n"
-"distribuyen bajo los t茅rminos de la Licencia P煤blica General GNU\n"
-"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
-"mayor铆a\n"
-"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
-"m贸dulos de los programas que cubren. Haga el favor de leer y de aceptar los "
-"t茅rminos y\n"
-"condiciones de las licencias que acompa帽an a cada uno de ellos antes de\n"
-"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
-"(o su representante) de dicho programa, y no a MandrakeSoft. Los\n"
-"programas desarrollados por MandrakeSoft est谩n sometidos a la licencia\n"
-"GPL. La documentaci贸n escrita por MandrakeSoft esta sometida a una\n"
-"licencia especifica. Haga el favor de dirigirse a la documentaci贸n para\n"
-"obtener m谩s informaci贸n.\n"
-"\n"
-"\n"
-"4. Propiedad intelectual\n"
+"OSS (Open Sound System) fue el primer API de sonido. Es un API de sonido "
+"independiente del sistema operativo (est谩 disponible en la mayor铆a de los "
+"sistemas Unix) pero es un API muy b谩sico y limitado.\n"
+"Es m谩s, todos los controladores OSS reinventan la rueda.\n"
"\n"
-"Todos los derechos, t铆tulos e intereses de los diferentes programas\n"
-"son propiedad exclusiva de sus autores respectivos y est谩n protegidos\n"
-"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
-"derechos de los programas. Las marcas \"Mandrake\" y \"Mandrake Linux\" "
-"as铆\n"
-"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
+"ALSA (Advanced Linux Sound Architecture) es una arquitectura modular que\n"
+"soporta un amplio rango de tarjetas ISA, USB y PCI.\n"
"\n"
+"Tambi茅n brinda un API de m谩s alto nivel que OSS.\n"
"\n"
-"5. Disposiciones diversas\n"
-" \n"
-"Si alguna disposici贸n de este contrato de licencia fuera declarada\n"
-"nula, ilegal o inaplicable por un tribunal competente, esta\n"
-"disposici贸n ser铆a excluida del presente contrato. Sin embargo\n"
-"Ud. seguir谩 sometido a las otras disposiciones, que tendr谩n\n"
-"plenos efectos. El contrato de licencia est谩 regido por las leyes\n"
-"francesas. Toda disputa relativa a los presentes t茅rminos ser谩\n"
-"resuelta, preferentemente, por v铆a amigable. En caso de desacuerdo con\n"
-"MandrakeSoft S.A., el litigio ser谩 tramitado a los tribunales\n"
-"competentes de Par铆s, Francia. Para cualquier pregunta relacionada con\n"
-"este documento, por favor, p贸ngase en contacto con MandrakeSoft S.A.\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando en la etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Ayuda"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "no configurada"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "驴Seguir adelante?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Hubo un error al instalar los paquetes:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Hubo un error al ordenar los paquetes:"
+"Para utilizar ALSA, uno puede utilizar:\n"
+"- el API antiguo de compatibilidad OSS\n"
+"- el API nuevo de ALSA que brinda muchas caracter铆sticas mejoradas pero "
+"necesita del uso de la bilbioteca ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"隆Cambie su CD-ROM!\n"
+"La instalaci贸n autom谩tica puede automatizarse por completo si lo desea,\n"
+"隆隆en ese caso se adue帽ar谩 del disco r铆gido!!\n"
+"(la intenci贸n de esto es instalarlo en otro ordenador).\n"
"\n"
-"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
-"lo haya hecho.\n"
-"Si no lo posee, pulse Cancelar para cancelar la instalaci贸n desde este CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Rechazar"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando el paquete %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Sin detalles"
+"Puede preferir reproducir la instalaci贸n.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "Detalles"
+msgid "Network printer \"%s\", port %s"
+msgstr "Impresora de red \"%s\", puerto %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Preparando la instalaci贸n. Espere, por favor"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Por favor, elija qu茅 adaptador de red estar谩 conectado a su red de 谩rea "
+"local."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Tiempo restante "
+msgid "OK to restore the other files."
+msgstr "Se pueden restaurar los otros archivos."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Estimando"
+msgid "Please choose your keyboard layout."
+msgstr "Seleccione la distribuci贸n de su teclado."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instalando"
+msgid "Printer Device URI"
+msgstr "URI del dispositivo de impresi贸n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Elija los paquetes que desea instalar"
+msgid "Not erasable media!"
+msgstr "隆No es un soporte borrable!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Instalaci贸n m铆nima"
+msgid "Terminal-based"
+msgstr "Por terminal"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Actualizando la selecci贸n de paquetes"
+msgid "Installing a printing system in the %s security level"
+msgstr "Instalando un sistema de impresi贸n en el nivel de seguridad %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Cargar/Guardar en un disquete"
+msgid "The user name is too long"
+msgstr "El nombre de usuario es muy largo"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Anterior"
+msgid "Other OS (windows...)"
+msgstr "Otro SO (Windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalar"
+msgid "WebDAV remote site already in sync!"
+msgstr "隆El sitio WebDAV remoto ya est谩 sincronizado!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Mostrar los paquetes seleccionados autom谩ticamente"
+msgid "Reading printer database..."
+msgstr "Leyendo base de datos de impresoras ..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No puede desmarcar este paquete. Debe ser actualizado"
+msgid "Generate auto install floppy"
+msgstr "Generar un disquete de instalaci贸n autom谩tica"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Se debe actualizar este paquete\n"
-"驴Est谩 seguro que quiere desmarcarlo?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "No puede desmarcar este paquete. Ya est谩 instalado"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "No puede seleccionar/deseleccionar este paquete"
+"\t\t nombre de usuario: %s\n"
+"\t\t en ruta: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Se van a quitar los siguientes paquetes"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Se van a instalar los siguientes paquetes"
+msgid "No open source driver"
+msgstr "No hay controlador open source"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-"No puede seleccionar este paquete porque no hay espacio suficiente para "
-"instalarlo"
+"Basado en el nivel anterior, pero el sistema est谩 completamente cerrado.\n"
+"Las caracter铆sticas de seguridad est谩n al m谩ximo."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tama帽o: %d KB\n"
+msgid "New Caledonia"
+msgstr "Nueva Caledonia"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versi贸n: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocolo europeo (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nombre: %s\n"
+msgid "Video mode"
+msgstr "Modo de v铆deo"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Paquete incorrecto"
+msgid "Please enter your email address below "
+msgstr "Por favor, ingrese su direcci贸n de correo electr贸nico debajo "
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Otros"
+msgid "Oman"
+msgstr "Om谩n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tama帽o total: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "Monitoreo de la red"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Siguiente ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Selecci贸n de paquetes individuales"
+msgid "New size in MB: "
+msgstr "Tama帽o nuevo en MB: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Selecci贸n de grupos de paquetes"
+msgid "Partition table type: %s\n"
+msgstr "Tipo de la tabla de particiones: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Su sistema tiene pocos recursos. Puede tener alg煤n problema instalando\n"
-"Mandrake Linux. Si eso ocurre, puede intentar una instalaci贸n tipo texto.\n"
-"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
+msgid "Authentication Windows Domain"
+msgstr "Dominio de Autenticaci贸n de Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Guardar la selecci贸n de paquetes"
+msgid "US keyboard"
+msgstr "Estadounidense"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatizada"
+msgid "Buttons emulation"
+msgstr "Emulaci贸n de los botones"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Reproducir"
+msgid ", network printer \"%s\", port %s"
+msgstr ", impresora de red \"%s\", puerto %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"La instalaci贸n autom谩tica puede automatizarse por completo si lo desea,\n"
-"隆隆en ese caso se adue帽ar谩 del disco r铆gido!!\n"
-"(la intenci贸n de esto es instalarlo en otro ordenador).\n"
"\n"
-"Puede preferir reproducir la instalaci贸n.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Generar un disquete de instalaci贸n autom谩tica"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Reiniciar"
+"Actividades de Drakbackup por medio de cinta:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Algunas de las etapas no fueron completadas.\n"
"\n"
-"驴Realmente desea salir ahora?"
+" Problema en la conexi贸n FTP: No fue posible enviar sus archivos de copia de "
+"respaldo por FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Creando el disquete de instalaci贸n autom谩tica"
+msgid "Sending Speed:"
+msgstr "Velocidad de env铆o:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserte un disquete en blanco en la unidad %s"
+msgid "Halt bug"
+msgstr "Bug de Halt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
-" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
-" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
-" reiniciar e introduzca:\n"
-" setenv boot-device %s, \\\\:tbxi\n"
-" Luego escriba: shut-down\n"
-"La pr贸xima vez que arranque deber铆a ver el prompt del cargador de arranque."
+msgid "Mail alert configuration"
+msgstr "Configuraci贸n de alerta por correo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Fall贸 la instalaci贸n del cargador de arranque. Ocurri贸 el siguiente error:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Instalando cargador de arranque"
+msgid "Bosnian"
+msgstr "Bosnio"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ocurri贸 un error al instalar aboot, \n"
-"驴desea forzar la instalaci贸n incluso si ello implicara la destrucci贸n de la "
-"primera partici贸n?"
+msgid "Release: "
+msgstr "Versi贸n:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "驴Desea usar aboot?"
+msgid "Connection speed"
+msgstr "Velocidad de la conexi贸n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Parece que tiene una m谩quina desconocida o una OldWorld,\n"
-"El gestor de arranque yaboot no funcionar谩 en la misma.\n"
-"La instalaci贸n continuar谩, pero necesitar谩\n"
-"utilizar BootX o alguna otra manera para arrancar su m谩quina"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Preparando el cargador de arranque"
+"Por favor, ingrese el nombre del dispositivo de\n"
+" su grabadora de CD, ej: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Contrase帽a del Administrador del Dominio"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Nombre de usuario del Administrador del Dominio"
+msgid "Database Server"
+msgstr "Servidor de base de datos"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Dominio Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"capacidades especiales del controlador (posibilidad de grabar y/o soporte de "
+"DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dominio de Autenticaci贸n de Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "No se puede a帽adir una partici贸n al RAID md%d _ya formateado_"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Para que esto funcione con un PDC de W2K, probablemente necesite que el "
-"administrador ejecute: C:\\>net localgroup \"Pre-Windows 2000 Compatible "
-"Access\" everyone /add y vuelva a iniciar el servidor.\n"
-"Tambi茅n necesitar谩 el nombre de usuario/contrase帽a de un Administrador de "
-"Dominio para unir la m谩quina al dominio Windows(TM).\n"
-"Si todav铆a no est谩 habilitada la red, DrakX intentar谩 unirse al dominio "
-"luego de la etapa de configuraci贸n de red.\n"
-"Si esta configuraci贸n falla por alg煤n motivo y no funciona la autenticaci贸n "
-"PDC, ejecute 'smbpasswd -j DOMINIO -U USUARIO%%CONTRASE脩A' utilizando su "
-"Dominio Windows(TM), y Nombre de usuario/Contrase帽a de Administrador, luego "
-"del arranque del sistema.\n"
-"El comando 'wbinfo -t' probar谩 si sus secretos de autenticaci贸n son buenos."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autentificaci贸n NIS"
+"Su tarjeta s贸lo puede admitir aceleraci贸n de 3D por hardware con XFree %s,\n"
+"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
+"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Por favor espere, configurando las opciones de seguridad..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Desconocido|CPH05X (bt878) [muchos fabricantes]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Lanzar el sistema X-Window al comenzar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentificaci贸n LDAP"
+msgid "hourly"
+msgstr "cada hora"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " Recuperados satisfactoriamente en %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Archivos locales"
+msgid "Making printer port available for CUPS..."
+msgstr "Haciendo que el puerto de la impresora est茅 disponible para CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Autentificaci贸n"
+msgid "Antigua and Barbuda"
+msgstr "Antigua y Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Esta contrase帽a es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No password"
-msgstr "Sin contrase帽a"
+"!!! Indica que la contrase帽a en la base de datos del sistema es diferente\n"
+"de la de la base de datos del Servidor de Terminales.\n"
+"Quite/agregue el usuario al Servidor de Terminales para permitir conexi贸n."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Contrase帽a de root"
+msgid "Spanish"
+msgstr "Espa帽ol"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "No ha configurado a X 驴Est谩 seguro que realmente desea esto?"
+msgid "Start"
+msgstr "Iniciar"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servicios: %d activados de %d registrados"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Activar/desactivar verificaciones de promiscuidad de tarjetas Ethernet."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services"
-msgstr "Servicios"
+msgid "Configuring applications..."
+msgstr "Configurando las aplicaciones..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "System"
-msgstr "Sistema"
+msgid "Normal modem connection"
+msgstr "Conexi贸n normal por m贸dem"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "%s on %s"
-msgstr "%s en %s"
+msgid "File Selection"
+msgstr "Selecci贸n de archivos."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Cargador de arranque"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"驴Qu茅 configuraci贸n de RDSI prefiere?\n"
+"\n"
+"* La configuraci贸n antigua utiliza isdn4net. Tiene herramientas\n"
+" poderosas, pero es algo complicada de configurar para un reci茅n \n"
+" llegado, y no es est谩ndar.\n"
+"* La configuraci贸n nueva es m谩s f谩cil de entender, m谩s est谩ndar,\n"
+" pero con menos herramientas.\n"
+"\n"
+"Le recomendamos la configuraci贸n ligera (esto es, la nueva).\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Boot"
-msgstr "Arranque"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "disabled"
-msgstr "deshabilitado"
+msgid "Run config tool"
+msgstr "Ejecutar herramienta de configuraci贸n"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "activated"
-msgstr "activado"
+msgid "Bootloader installation"
+msgstr "Instalaci贸n del cargador de arranque"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Cortafuegos"
+msgid "Root partition size in MB: "
+msgstr "Tama帽o de la partici贸n ra铆z en MB: "
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Seguridad"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security Level"
-msgstr "Nivel de seguridad"
+msgid "Etherboot ISO image is %s"
+msgstr "La imagen ISO Etherboot es %s"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "Red"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
+"los nombres de m谩quinas en direcciones IP."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network & Internet"
-msgstr "Redes e Internet"
+msgid "Disconnect..."
+msgstr "Desconectar..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Interfaz gr谩fica"
+msgid "Saint Lucia"
+msgstr "Santa Luc铆a"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Hardware"
-msgstr "Hardware"
+msgid "Report"
+msgstr "Reporte"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TV card"
-msgstr "Tarjeta de TV"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No se detect贸 tarjeta de sonido. Pruebe \"harddrake\" luego de la instalaci贸n"
+msgid "level"
+msgstr "nivel"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Use \"sndconfig\" luego de la instalaci贸n para configurar su tarjeta de "
-"sonido"
+"Todos los incidentes estar谩n seguidos por un 煤nico experto t茅cnico "
+"calificado de MandrakeSoft."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "驴Tiene una tarjeta de sonido ISA?"
+msgid "Package Group Selection"
+msgstr "Selecci贸n de grupos de paquetes"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Tarjeta de sonido"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restaurar por medio del protocolo de red: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
+msgid "You can configure each parameter of the module here."
+msgstr "Aqu铆 puede configurar cada par谩metro del m贸dulo."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Sin impresora"
+msgid "Choose the resolution and the color depth"
+msgstr "Elija la resoluci贸n y la profundidad de colores"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Impresora"
+msgid "Emulate third button?"
+msgstr "驴Emular el tercer bot贸n?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Rat贸n"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"No puede crear una partici贸n nueva\n"
+"(debido a que alcanz贸 la cantidad m谩xima de particiones primarias).\n"
+"Primero debe quitar una partici贸n primaria y crear una partici贸n extendida."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Huso horario"
+msgid "Mount"
+msgstr "Montar"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Teclado"
+msgid "Creating auto install floppy"
+msgstr "Creando el disquete de instalaci贸n autom谩tica"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Resumen"
+msgid "Install updates"
+msgstr "Instalar actualizaciones"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "Servidor NTP"
+msgid "text box height"
+msgstr "altura del cuadro de texto"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronizaci贸n autom谩tica de hora (usando NTP)"
+msgid "State"
+msgstr "Estado"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Reloj interno puesto a GMT"
+msgid "Be sure a media is present for the device %s"
+msgstr "Aseg煤rese que hay un soporte para el dispositivo %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "驴Cu谩l es su huso horario?"
+msgid "Enable multiple profiles"
+msgstr "Activar perfiles m煤ltiples"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "驴Desea intentar nuevamente?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Estas opciones pueden respaldar y restaurar todos los archivos en el "
+"directorio /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "No se puede contactar al sitio de r茅plica %s"
+msgid "Local printer"
+msgstr "Impresora local"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-"Contactando con el sitio de r茅plica para obtener la lista de los paquetes "
-"disponibles..."
+msgid "Files Restored..."
+msgstr "Archivos restaurados..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elija un sitio de r茅plica del cual obtener los paquetes"
+msgid "Package selection"
+msgstr "Selecci贸n de paquetes"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
-"r茅plicas disponibles"
+msgid "Mauritania"
+msgstr "Mauritania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Ahora tiene la oportunidad de bajar paquetes actualizados. Estos paquetes\n"
-"se han actualizad despu茅s de que se public贸 la distribuci贸n. Puede que los\n"
-"mismos contengan correcciones de bugs o de seguridad.\n"
+"Puedo mantener su configuraci贸n corriente y asumir que ya configur贸 un "
+"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
+"que us贸 para su red local; no la volver茅 a configurar y no tocar茅 la "
+"configuraci贸n de su servidor DHCP.\n"
"\n"
-"Para descargar estos paquetes, necesitar谩 tener una conexi贸n con la\n"
-"Internet que est茅 funcionando.\n"
+"La entrada DNS predeterminada es el Servidor de nombres de cach茅 configurado "
+"en el cortafuegos. Lo puede reemplazar, por ej., con la IP del DNS de su "
+"ISP.\n"
+"\n"
+"De lo contrario, puedo volver a configurar su interfaz y (volver a) "
+"configurar un servidor DHCP por Usted.\n"
"\n"
-"驴Desea instalar las actualizaciones?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Por favor, inserte el disquete de m贸dulos actualizados en la unidad %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"No se encontr贸 ninguna impresora local. Para instalar una manualmente, "
+"introduzca un nombre de dispositivo/nombre de archivo en la l铆nea de entrada "
+"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
+"1陋 impresora USB: /dev/usb/lp0, 2陋 impresora USB: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Configuraci贸n posterior a la instalaci贸n"
+msgid "All primary partitions are used"
+msgstr "Todas las particiones primarias est谩n usadas"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Instalando el paquete %s\n"
-"%d%%"
+"Despu茅s de esto, se recomienda que reinicie su entorno X\n"
+"para evitar el problema del cambio del nombre de la m谩quina."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Preparando la instalaci贸n"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Detecci贸n y configuraci贸n autom谩tica del hardware al arrancar."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetado como \"%s\""
+msgid "Installation Server Configuration"
+msgstr "Configuraci贸n del servidor de instalaci贸n"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si tiene todos los CD de la lista siguiente, haga clic sobre \"Aceptar\".\n"
-"Si no tiene ning煤n CD, haga clic sobre \"Cancelar\".\n"
-"Si s贸lo le faltan algunos CD, desm谩rquelos y haga clic sobre \"Aceptar\"."
+msgid "Configuring IDE"
+msgstr "Configurando dispositivos IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Todo"
+msgid "Network functionality not configured"
+msgstr "Funcionalidad de red no configurada"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalaci贸n m铆nima \"en serio\" (especialmente sin urpmi)"
+msgid "Configure module"
+msgstr "Configurar m贸dulo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Con documentaci贸n b谩sica (隆recomendado!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Islas Cocos (Keeling)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Con X"
+msgid "Disconnecting from the Internet "
+msgstr "Desconectando desde la Internet "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"No ha seleccionado ning煤n grupo de paquetes\n"
-"Elija por favor la m铆nima instalaci贸n que quiera."
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Necesita reiniciar el equipo para que la modificaci贸n tenga efecto"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Tipo de instalaci贸n."
+msgid "Provider phone number"
+msgstr "N煤mero de tel茅fono del proveedor"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "El tama帽o seleccionado es mayor que el disponible"
+msgid "Host %s"
+msgstr "Host %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Introduzca un disquete que contenga la selecci贸n de paquetes"
+msgid "Armenia"
+msgstr "Armenia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Cargando desde un disquete"
+msgid "Fiji"
+msgstr "Fidji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Selecci贸n de paquetes"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Argumentos: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Configurar la longitud m铆nima de contrase帽a y la cantidad m铆nima de d铆gitos "
+"y cantidad m铆nima de letras may煤sculas."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Guardar en un disquete"
+msgid "Second floppy drive"
+msgstr "Segunda disquetera"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Cargar desde un disquete"
+msgid "About Harddrake"
+msgstr "Acerca de Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Por favor, seleccione cargar o guardar la selecci贸n de paquetes en "
-"disquete.\n"
-"El formato es el mismo que los disquetes generados para la instalaci贸n "
-"autom谩tica."
+msgid "Drive capacity"
+msgstr "Capacidad de la unidad"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
+"Inserte un disquete en la unidad\n"
+"Se perder谩n todos los datos del disquete"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Buscando los paquetes disponibles..."
+msgid "Size: %s"
+msgstr "Tama帽o: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Encontrando los paquetes a actualizar..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Las teclas Control y Shift simult谩neamente"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Buscando paquetes ya instalados..."
+msgid "secondary"
+msgstr "secundario"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Buscando los paquetes disponibles y reconstruyendo la base de datos de RPM..."
+msgid "View Backup Configuration."
+msgstr "Ver configuraci贸n del respaldo"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Espacio de intercambio insuficiente para completar la instalaci贸n, a帽ada un "
-"poco m谩s"
+msgid "if set to yes, report check result to syslog."
+msgstr "si se pone en s铆, reportar resultado de verificaci贸n en syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Fall贸 la verificaci贸n del sistema de archivos %s. 驴Desea reparar los "
-"errores? (cuidado, puede perder datos)"
+msgid "No password"
+msgstr "Sin contrase帽a"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "驴Verificar el disco en busca de bloques malos?"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Elija las particiones que desea formatear"
+msgid "There is no existing partition to use"
+msgstr "No hay ninguna partici贸n existente para usar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Necesita reiniciar el equipo para que se efect煤e la modificaci贸n de la tabla "
-"de particiones"
+"Los siguiente esc谩neres\n"
+"\n"
+"%s\n"
+"est谩n disponibles en su sistema.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
-"隆No hay 1MB de espacio para bootstrap! La instalaci贸n continuar谩, pero para "
-"arrancar su sistema, necesitar谩 crear la partici贸n bootstrap en DiskDrake"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Seleccione los puntos de montaje"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Rastreando las particiones para encontrar los puntos de montaje"
+"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
+"nombre de host o direcci贸n IP de la impresora y, opcionalmente, el n煤mero de "
+"puerto (9100, por defecto). En servidores HP JetDirect el n煤mero de puerto "
+"por lo general es 9100, en otros servidores puede variar. Consulte el manual "
+"de su hardware."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "no hay particiones disponibles"
+msgid "Hard drive information"
+msgstr "Informaci贸n del disco r铆gido"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Configurando dispositivos IDE"
+msgid "Russian"
+msgstr "Ruso"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Jordania"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarjetas PCMCIA..."
+msgid "Hide files"
+msgstr "Ocultar archivos"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Detectar autom谩ticamente las impresoras conectadas a esta m谩quina"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulaci贸n del bot贸n 3"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"隆XawTV no est谩 instalado!\n"
+"\n"
+"\n"
+"Si tiene una tarjeta de TV pero DrakX no la detect贸 (\"/etc/modules\" no\n"
+"tiene el m贸dulo bttv ni saa7134) ni instal贸 xawtv, por favor env铆e\n"
+"el resultado de \"lspcidrake -v -f\" a \"install@mandrakesoft.com\" con\n"
+"el tema \"undetected TV card\".\n"
+"\n"
+"Lo puede instalar tecleando \"urpmi xawtv\", como root, en la consola."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulaci贸n del bot贸n 2"
+msgid "Sorry, no floppy drive available"
+msgstr "Disculpe, pero no hay ninguna disquetera disponible"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Emulaci贸n de los botones"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Seleccione el puerto serie al que est谩 conectado el rat贸n, por favor."
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Configure a su servidor Windows para que la impresi贸n est茅 disponible bajo "
+"el protocolo IPP y configure la impresi贸n desde esta m谩quina bajo el tipo de "
+"conexi贸n \"%s\" en PrinterDrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Puerto del rat贸n"
+msgid "Bad package"
+msgstr "Paquete incorrecto"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Por favor, seleccione el tipo de su rat贸n."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Transforme su m谩quina en un servidor Linux potente con unos pocos clic del "
+"rat贸n: servidor web, de correo, cortafuegos, router, servidor de archivos e "
+"impresoras, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Clave de cifrado para %s"
+msgid "DrakSec Basic Options"
+msgstr "Opciones b谩sicas de DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Actualizar %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Nota: si tiene una tarjeta de sonido ISA PnP, tendr谩 que utilizar el "
+"programa sndconfig. Simplemente teclee \"sndconfig\" en una consola."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "驴Es una instalaci贸n o una actualizaci贸n?"
+msgid "Romania"
+msgstr "Ruman铆a"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalaci贸n/Actualizaci贸n"
+msgid "choose device"
+msgstr "elija el dispositivo"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Aqu铆 tiene la lista completa de teclados disponibles"
+msgid "Canada"
+msgstr "Canad谩"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Seleccione la distribuci贸n de su teclado."
+msgid "Remove from LVM"
+msgstr "Quitar del LVM"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Salir"
+msgid "Timezone"
+msgstr "Huso horario"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Acuerdo de licencia"
+msgid "German"
+msgstr "Alem谩n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Ocurri贸 un error"
+msgid "Next ->"
+msgstr "Siguiente ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-" <Tab>/<Alt-Tab> entre elementos | <espacio> selecciona | <F12> pantalla "
-"sig. "
+"Habilitar esto le permite imprimir archivos de texto plano en idioma "
+"japon茅s. S贸lo use esta funci贸n y realmente desea imprimir texto en japon茅s, "
+"si se activa Usted no puede imprimir m谩s caracteres acentuados en "
+"tipograf铆as latinas y no podr谩 ajustar los m谩rgenes, el tama帽o de letra, "
+"etc. Este ajuste s贸lo afecta a las impresoras definidas en esta m谩quina. Si "
+"desea imprimir texto en una impresora ubicada en un m谩quina remota, debe "
+"activar esta funci贸n en dicha m谩quina remota."
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalaci贸n %s de Mandrake Linux"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Es probable que esta partici贸n sea\n"
+"una partici贸n de Controlador, probablemente\n"
+"deber铆a dejarla como est谩.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Ninguna disquetera disponible"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenido a %s"
+msgid "Horizontal refresh rate"
+msgstr "Frecuencia de barrido horizontal"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Algunos paquetes importantes no fueron instalados correctamente.\n"
-"Seguramente su lector de CD o su CD de instalaci贸n sean defectuosos.\n"
-"Compruebe el CD de instalaci贸n en un sistema ya existente con el comando:\n"
-" rpm -qpl Mandrake/RPMS/*.rpm\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaje %s duplicado"
+"No se puede deseleccionar el punto de montaje ya que esta partici贸n\n"
+"se usa para un montaje en loopback.\n"
+"Quite el montaje de loopback primero"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Ocurri贸 un error y no se puede gestionar de forma adecuada.\n"
-"Contin煤e bajo su propio riesgo."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Espere, por favor"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "B谩sico"
+"La configuraci贸n de la red hecha durante la instalaci贸n no se puede iniciar "
+"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
+"sistema y corrija la configuraci贸n usando el Centro de control de Mandrake, "
+"secci贸n \"Redes e Internet\"/\"Conexi贸n\", y tras esto configure la "
+"impresora, tambi茅n utilizando el Centro de Control de Mandrake, secci贸n "
+"\"Hardware\"/\"Impresora\"."
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avanzada"
+msgid "USB controllers"
+msgstr "Controladores USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Quitar"
+msgid "What norm is your TV using?"
+msgstr "驴Qu茅 norma est谩 utilizando su TV?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Modificar"
+msgid "Type:"
+msgstr "Tipo:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Agregar"
+msgid "Share name"
+msgstr "Nombre del recurso compartido"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Elija un archivo"
+msgid "enable"
+msgstr "activar"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Aqu铆 puede elegir la tecla o combinaci贸n de teclas que permitir谩\n"
-"cambiar entre los diferentes esquemas de teclado\n"
-"(ej.: latino y no latino)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Tecla \"Windows\" de la derecha"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Tecla \"Windows\" de la izquierda"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "La tecla \"Men煤\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Las teclas Alt y Shift simult谩neamente"
+"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
+"r茅plicas disponibles"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Las teclas Ctrl y Alt simult谩neamente"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Ocurri贸 un problema mientras se reiniciaba la red: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "Tecla CapsLock"
+msgid "Remove the loopback file?"
+msgstr "驴Borrar el archivo de loopback?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Las teclas Control y Shift simult谩neamente"
+msgid "Selected size is larger than available space"
+msgstr "El tama帽o seleccionado es mayor que el disponible"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Ambas teclas Shift simult谩neamente"
+msgid "NCP server name missing!"
+msgstr "隆No se encuentra el nombre del servidor NCP!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Tecla Alt derecha"
+msgid "Please choose your country."
+msgstr "Seleccione su pa铆s, por favor."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavo (lat铆n)"
+msgid "Hard Disk Backup files..."
+msgstr "Respaldar archivos del disco r铆gido..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"num茅rico\" QWERTY"
+msgid "Laotian"
+msgstr "Laosiano"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Estadounidense"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"El protocolo rstat permite a los usuarios de una red recoger\n"
+"informaci贸n sobre el rendimiento de cualquier m谩quina de dicha red."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Brit谩nico"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Regenerando lista de esc谩neres configurados ..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ucraniano"
+msgid "Scanner"
+msgstr "Esc谩ner."
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo \"Q\" moderno)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Advertencia: probar esta tarjeta de v铆deo puede colgar su computadora"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"El nombre de usuario (login) s贸lo debe contener letras, n煤meros, `-' y `_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Teclado tajik"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Teclado tailand茅s"
+msgid "Welcome To Crackers"
+msgstr "Bienvenidos, crackers"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (disposici贸n de m谩quina de escribir)"
+msgid "Module options:"
+msgstr "Opciones de los m贸dulos:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (disposici贸n ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Haga seguras sus redes con el Multi Network Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbio (cir铆lico)"
+msgid "Go on without configuring the network"
+msgstr "Continuar sin configurar la red"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
+msgid "Abort"
+msgstr "Abortar"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Sin pedido de contrase帽a en %s en el puerto %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Esloveno"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Por favor, marque si desea utilizar un dispositivo que no rebobina."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Sueco"
+msgid "Usage of remote scanners"
+msgstr "Uso de esc谩neres remotos"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ruso"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Su partici贸n Windows est谩 muy fragmentada, por favor primero ejecute \"defrag"
+"\""
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumano (qwerty)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Noruego)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumano (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Progreso de respaldo del disco r铆gido..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadiense (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "No se puede hacer fork: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugu茅s"
+msgid "Type: "
+msgstr "Tipo: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (distribuci贸n qwertz)"
+msgid "<-- Edit Client"
+msgstr "<-- Editar cliente"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (distribuci贸n qwerty)"
+msgid "no fonts found"
+msgstr "no se encontraron tipograf铆as"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Noruego"
+msgid "Mouse"
+msgstr "Rat贸n"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holand茅s"
+msgid "not enough room in /boot"
+msgstr "no hay espacio suficiente en /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malt茅s (EE.UU.)"
+msgid "Choosing an arbitratry driver"
+msgstr "Eligiendo un controlador arbitrario"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malt茅s (Reino Unido)"
+msgid "Host name"
+msgstr "Nombre de la m谩quina"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongol (cir铆lico)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Birmano)"
+msgid "the color of the progress bar"
+msgstr "el color de la barra de progreso"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Macedonio"
+msgid "Suppress Fonts Files"
+msgstr "Suprimir archivos de tipograf铆as"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayo"
+msgid "Add to RAID"
+msgstr "A帽adir al RAID"
-#: ../../keyboard.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Let贸n"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
+"operativos, n煤cleos alternativos, o para una imagen de arranque de\n"
+"emergencia.\n"
+"\n"
+"Para otros sistemas operativos, la entrada consiste s贸lo de una etiqueta y\n"
+"la partici贸n ra铆z.\n"
+"\n"
+"Para Linux, hay algunas opciones posibles:\n"
+"\n"
+" * Etiqueta: esta es simplemente el nombre que deber谩 teclear en el prompt\n"
+"de yaboot para seleccionar esta opci贸n de arranque.\n"
+"\n"
+" * Imagen: esta deber铆a ser el nombre del n煤cleo a arrancar. T铆picamente,\n"
+"vmlinux o una variaci贸n de vmlinux con una extensi贸n.\n"
+"\n"
+" * Ra铆z: el dispositivo \"root\" o \"/\" para su instalaci贸n Linux.\n"
+"\n"
+" * A帽adir: la opci贸n de a帽adir al n煤cleo se usa bastante sobre el hardware\n"
+"Apple para asistir en la inicializaci贸n del hardware de v铆deo, o para\n"
+"habilitar la emulaci贸n de los botones del rat贸n con el teclado para los\n"
+"botones 2do y 3ro del rat贸n que por lo general no tienen los ratones\n"
+"est谩ndar de Apple. Algunos ejemplos son los siguientes:\n"
+"\n"
+" \tvideo=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" \tvideo=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: esta opci贸n se puede usar o bien para cargar los m贸dulos\n"
+"iniciales, antes que est茅 disponible el dispositivo de arranque, o bien\n"
+"cargar una imagen de ramdisk para una situaci贸n de arranque de emergencia.\n"
+"\n"
+" * Tama帽o de Initrd: generalmente el tama帽o por defecto del ramdisk es 4096\n"
+"bytes. Puede usar esta opci贸n si necesita asignar un ramdisk mayor.\n"
+"\n"
+" * Lectura-Escritura: normalmente la partici贸n \"root\" se levanta en modo\n"
+"de s贸lo lectura, para permitir una verificaci贸n del sistema de archivos\n"
+"antes que el sistema se levante por completo. Aqu铆 puede cambiar esta\n"
+"opci贸n.\n"
+"\n"
+" * NoVideo: en caso que el hardware de v铆deo de Apple sea excepcionalmente\n"
+"problem谩tico, puede seleccionar esta opci贸n para arrancar en el modo\n"
+"\"novideo\", con soporte nativo para el frame-buffer.\n"
+"\n"
+" * Predeterminada: selecciona a esta entrada como la opci贸n Linux por\n"
+"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
+"de Yaboot. Esta entrada tambi茅n se marcar谩 con un \"*\", si presiona [Tab]\n"
+"para ver las selecciones del arranque."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fon茅tico\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"La impresora \"%s\" se agreg贸 satisfactoriamente a Star Office/OpenOffice."
+"org."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"num茅rico\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "隆Ninguna disquetera disponible!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (nuevo)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Para conocer las opciones disponibles para la impresora corriente lea la "
+"lista que se muestra debajo o haga clic sobre el bot贸n \"Imprimir lista de "
+"opciones\".%s%s%s\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antiguo)"
+msgid "Continue anyway?"
+msgstr "驴Seguir adelante?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laosiano"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Si no se lista su impresora, elija una compatible (vea el manual de la "
+"misma) o una simliar."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinoamericano"
+msgid "Printer"
+msgstr "Impresora"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Coreano"
+msgid "Saudi Arabia"
+msgstr "Arabia Saud铆"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japon茅s de 106 teclas"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Se agregaron algunos dispositivos:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italiano"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometr铆a: %s cilindros, %s cabezas, %s sectores\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Island茅s"
+msgid "Printing on the printer \"%s\""
+msgstr "Imprimiendo en la impresora \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iran铆"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow y /etc/hosts.deny ya configurados - no se cambiaron"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israel铆 (fon茅tico)"
+msgid "Restore From Tape"
+msgstr "Restaurar desde cinta"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israel铆"
+msgid "Choose the profile to configure"
+msgstr "Elija el perfil a configurar"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croata"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Ingrese un nombre de la m谩quina Zeroconf sin puntos si no desea\n"
+"utilizar el nombre predeterminado."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "H煤ngaro"
+msgid "Backup Now from configuration file"
+msgstr "Respaldar Ahora desde archivo de configuraci贸n"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Indio (Gurmukhi)"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Los puntos de montaje deber铆an contener s贸lo caracteres alfanum茅ricos"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Indio (Gujarati)"
+msgid "Restarting printing system..."
+msgstr "Reiniciando el sistema de impresi贸n ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Griego"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumentos: (name)\n"
+"\n"
+"A帽adir el nombre como una excepci贸n al manejo de edad de contrase帽as por "
+"msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (estilo \"lat铆n\")"
+msgid "See hardware info"
+msgstr "Ver informaci贸n sobre el hardware"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (estilo \"ruso\")"
+msgid "First sector of boot partition"
+msgstr "Primer sector de la partici贸n de arranque"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Franc茅s"
+msgid "Printer manufacturer, model"
+msgstr "Fabricante de la impresora, modelo"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finland茅s"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Espa帽ol"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPCIONES]...\n"
+"Configurador del Servidor de Terminales de Mandrake (MTS)\n"
+"--enable : habilitar MTS\n"
+"--disable : deshabilitar MTS\n"
+"--start : iniciar MTS\n"
+"--stop : detener MTS\n"
+"--adduser : a帽adir usuario existente a MTS (necesita "
+"nombre_de_usuario)\n"
+"--deluser : quitar usuario existente de MTS (necesita "
+"nombre_de_usaurio)\n"
+"--addclient : a帽adir m谩quina cliente a MTS (necesita direcci贸n MAC, IP, "
+"nombre imagen nbi)\n"
+"--delclient : quitar m谩quina cliente de MTS (necesita direcci贸n MAC, "
+"IP, nombre imagen nbi)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonio"
+msgid "Subnet Mask:"
+msgstr "M谩scara de subred:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Sueco)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Instalaci贸n satisfactoria de LiLo y temas de Bootsplash"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruego)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Los dos par谩metros cr铆ticos son la frecuencia de barrido vertical, que "
+"indica la frecuencia\n"
+"a la cual se refresca la pantalla entera, y m谩s importante a煤n, la "
+"frecuencia de sincronizaci贸n\n"
+"horizontal, la cual es la frecuencia de las l铆neas de barrido horizontal.\n"
+"\n"
+"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
+"frecuencia de sincronizaci贸n superior a la capacidad real de su monitor:\n"
+"puede da帽ar su monitor.\n"
+" En caso de duda, elija una configuraci贸n conservadora."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "Modificar"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dan茅s"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+" Los comandos \"%s\" y \"%s\" tambi茅n permiten modificar las opciones de "
+"configuraci贸n para un trabajo de impresi贸n particular. Simplemente a帽ada las "
+"opciones deseadas a la l铆nea de comando, por ejemplo \"%s <archivo>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Indio (Devanagari)"
+msgid "Need hostname, username and password!"
+msgstr "隆Necesita el nombre del host, el nombre de usuario y la contrase帽a!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Alem谩n (sin teclas muertas)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV es un protocolo que le permite montar localmente un directorio de un\n"
+"servidor web, y tratarlo como un sistema de archivos local (siempre y "
+"cuando\n"
+"el servidor web est谩 configurado como servidor WebDAV). Si desea a帽adir\n"
+"puntos de montaje WebDAV, seleccione \"Nuevo\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Alem谩n"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
+msgid "new"
+msgstr "nuevo"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "驴Desea intentar nuevamente?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Suizo (franc茅s)"
+msgid "Wizard"
+msgstr "Asistente"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Suizo (germ谩nico)"
+msgid "Edit selected server"
+msgstr "Editar servidor seleccionado"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Bielorruso"
+msgid "Please choose where you want to backup"
+msgstr "Por favor, elija d贸nde desea realizar la copia de respaldo"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnio"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Necesita reiniciar el equipo para que se efect煤e la modificaci贸n de la tabla "
+"de particiones"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasile帽o (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "No incluir el cache del navegador"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "B煤lgaro (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Por favor, seleccione la distribuci贸n de su teclado."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "B煤lgaro (fon茅tico)"
+msgid "Standard"
+msgstr "Est谩ndar"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Indio (Bengal铆)"
+msgid "Please choose your mouse type."
+msgstr "Seleccione el tipo de su rat贸n, por favor."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid "Connect..."
+msgstr "Conectar..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbadj谩n (lat铆n)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "隆Fall贸 la configuraci贸n de la impresora \"%s\"!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Ar谩bico"
+msgid "not configured"
+msgstr "no configurada"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fon茅tico)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenio (nuevo)"
+msgid "About"
+msgstr "Acerca de"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenio (antiguo)"
+msgid "Proxies configuration"
+msgstr "Configuraci贸n de los proxies"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albano"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polaco"
+msgid "Start: sector %s\n"
+msgstr "Comienzo: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Interfaz de red ya configurada"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbaue"
+msgid "Couldn't access the floppy!"
+msgstr "隆No se pudo acceder al disquete!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "conectando con el asistente Bugzilla..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Sud谩frica"
+msgid "Mail Server"
+msgstr "Servidor de correo"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbia"
+msgid "Please click on a partition"
+msgstr "Por favor, haga clic sobre una partici贸n"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "隆Que tenga un buen d铆a!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "a trav茅s de la red"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis y Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Actualizar %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Seleccione la conexi贸n de la impresora"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Islas V铆rgenes (EE.UU.)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Buscando canales de TV, en progreso ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Islas V铆rgenes (Brit谩nicas)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Error enviando el archivo por FTP.\n"
+" Por favor, corrija su configuraci贸n de FTP."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "Comienzo de rango IP:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "San Vicente y las Granadinas"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"El demonio para el superservidor de Internet (normalmente llamado inetd) "
+"inicia\n"
+"una variedad de servicios adicionales de internet seg煤n sea necesario.\n"
+"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
+"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
+"dependen de 茅l."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vaticano"
+msgid "the height of the progress bar"
+msgstr "la altura de la barra de progreso"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekist谩n"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Guardar usando %s en el host: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Islas Circundantes Menores de los Estados Unidos"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Aceptar/Rechazar eco ICMP difundido."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Servidor de nombres de dominio"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ucrania"
+msgid "Security Level:"
+msgstr "Nivel de seguridad:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "Mount points must begin with a leading /"
+msgstr "Los puntos de montaje deben comenzar con una /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiw谩n"
+msgid "Postfix Mail Server"
+msgstr "Servidor de correo Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Salir sin grabar"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad y Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Turqu铆a"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Este producto est谩 disponible en el sitio web MandrakeStore"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Por favor, ingrese el tama帽o m谩ximo\n"
+" permitido para Drakbackup"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunicia"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenist谩n"
+msgid "Hard drive detection"
+msgstr "Detecci贸n del disco r铆gido"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Timor Oriental"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"No ha seleccionado ning煤n grupo de paquetes\n"
+"Elija por favor la m铆nima instalaci贸n que quiera."
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Por favor, ingrese la URL del servidor WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tajikist谩n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tailandia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Terrotorios Franceses del Sur"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Chad"
+msgid "Accept"
+msgstr "Aceptar"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Islas Turks y Caicos"
+msgid "Description"
+msgstr "Descripci贸n"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swazilandia"
+msgid "Error opening %s for writing: %s"
+msgstr "Error al abrir %s para escribir: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Siria"
+msgid "Mouse type: %s\n"
+msgstr "Tipo de rat贸n: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Su tarjeta puede admitir aceleraci贸n 3D por hardware con XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Santo Tom茅 y Pr铆ncipe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Por favor, elija el tama帽o de su CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir su s贸lo a miembros del grupo wheel o permitir su a cualquier "
+"usuario."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Expert Area"
+msgstr "脕rea experta"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Elija un monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "No se admite una etiqueta vac铆a"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leona"
+msgid "Maltese (UK)"
+msgstr "Malt茅s (Reino Unido)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Eslovaquia"
+msgid "I can't add any more partition"
+msgstr "No se pueden agregar m谩s particiones"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Islas Svalbard e Islas Jan Mayen"
+msgid "Size in MB: "
+msgstr "Tama帽o en MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Eslovenia"
+msgid "Remote printer"
+msgstr "Impresora remota"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Santa Helena"
+msgid "Please choose a language to use."
+msgstr "Por favor, elija el idioma a usar."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
+"con Internet.\n"
+"Simplemente acepte para mantener la configuraci贸n del dispositivo.\n"
+"Al modificar los campos de abajo se ignorar谩 esta configuraci贸n."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sud谩n"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Puedo configurar su computadora para que entre autom谩ticamente con un "
+"usuario."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Floppy format"
+msgstr "Formato del disquete"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Islas Salom贸n"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Arabia Saud铆"
+msgid "Generic Printers"
+msgstr "Impresoras gen茅ricas"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Por favor, elija la impresora a la cual deber铆an ir los trabajos o ingrese "
+"el nombre de un dispositivo o archivo en la l铆nea de entrada"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Rusia"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
+"Los esc谩neres en esta m谩quina est谩n disponibles para otras computadoras"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Ruman铆a"
+msgid "First sector of the root partition"
+msgstr "Primer sector de la partici贸n ra铆z"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "Reuni贸n"
+msgid "Alternative drivers"
+msgstr "Controladores alternativos"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Por favor, marque todas las opciones que necesita.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cabo Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Si esta CPU tiene o no el bug de la coma de Cyrix 6x86"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Los primeros Pentium eran defectuosos y se colgaban decodificando el c贸digo "
+"de bytes F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Por favor, elija el puerto donde est谩 conectada su impresora o ingrese el "
+"nombre de un dispositivo o archivo en la l铆nea de entrada"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre y Miquelon"
+msgid "/Options/Test"
+msgstr "/Opciones/Prueba"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polonia"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Este nivel se debe usar con mucho cuidado. Hace su sistema m谩s simple de\n"
+"usar, pero tambi茅n mucho m谩s vulnerable: no debe usarse para una m谩quina\n"
+"conectada en red con otras o a Internet. No hay contrase帽as de acceso."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakist谩n"
+msgid "Mounting partition %s"
+msgstr "Montando la partici贸n %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filipinas"
+msgid "User name"
+msgstr "Nombre del usuario"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Pap煤a Nueva Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Configuraci贸n nueva (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Polinesia Francesa"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Per煤"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "驴Qu茅 partici贸n desea usar para Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panam谩"
+msgid "Backup system"
+msgstr "Respaldar el sistema"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Om谩n"
+msgid "Test pages"
+msgstr "P谩ginas de prueba"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Nueva Zelanda"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Lista de datos a restaurar:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "Verificando %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "Opciones de la impresora por socket/TCP"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Memoria (DMA) de la tarjeta"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Francia"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "examinar"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Isla Norfolk"
+msgid "Checking installed software..."
+msgstr "Verificando software instalado..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "N铆ger"
+msgid "Remote printer name missing!"
+msgstr "隆Falta el nombre de la impresora remota!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nueva Caledonia"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "驴Desea habilitar la impresi贸n en las impresoras en la red local?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Turkey"
+msgstr "Turqu铆a"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel Speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malasia"
+msgid "Number of buttons"
+msgstr "Cantidad de botones"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "M茅xico"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamita \"num茅rico\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "M贸dulo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldivas"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Adem谩s, las colas no creadas con este programa o con \"foomatic-configure\" "
+"no se pueden transferir."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauricio"
+msgid "Hardware"
+msgstr "Hardware"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Las teclas Ctrl y Alt simult谩neamente"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Monserrat"
+msgid "United States"
+msgstr "Estados Unidos"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "Default OS?"
+msgstr "驴SO predeterminado?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinica"
+msgid "Swiss (German layout)"
+msgstr "Suizo (germ谩nico)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Islas Marianas del Norte"
+msgid "Configure all heads independently"
+msgstr "Configurar los monitores independientemente"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Por favor seleccione la impresora que desea configurar. La configuraci贸n de "
+"la impresora se har谩 de forma totalmente automatizada. Si su impresora no se "
+"detect贸 correctamente o si prefiere una configuraci贸n personalizada, active "
+"la \"Configuraci贸n manual\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "Servidor NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Cargar/Guardar en un disquete"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Macedonia"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "隆Todav铆a este tema no tiene un bootsplash en %s!"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Islas Marshall"
+msgid "nice"
+msgstr "bueno"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Leaving in %d seconds"
+msgstr "Saliendo en %d segundos"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldavia"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Seleccione el puerto serie al que est谩 conectado su m贸dem."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "M贸naco"
+msgid "Country"
+msgstr "Pa铆s"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Marruecos"
+msgid "Property"
+msgstr "Propiedad"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libia"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Letonia"
+msgid "LAN Configuration"
+msgstr "Configuraci贸n LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburgo"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Lituania"
+msgid "Path or Module required"
+msgstr "Se necesita Ruta o M贸dulo"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "Advanced Options"
+msgstr "Opciones avanzadas"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Coma bug"
+msgstr "Bug de la coma"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Ahora necesita elegir qu茅 particiones se utilizar谩n para la instalaci贸n de\n"
+"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
+"por una instalaci贸n previa de GNU/Linux o con otra herramienta de\n"
+"particionado, puede utilizarlas. De lo contrario, se deben definir\n"
+"particiones en el disco r铆gido.\n"
+"\n"
+"Para crear particiones, primero debe seleccionar un disco r铆gido. Puede\n"
+"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
+"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
+"SCSI y as铆 sucesivamente.\n"
+"\n"
+"Para particionar el disco r铆gido seleccionado, puede utilizar estas\n"
+"opciones:\n"
+"\n"
+" * \"%s\": esta opci贸n borra todas las particiones sobre el disco\n"
+"seleccionado.\n"
+"\n"
+" * \"%s\": esta opci贸n le permite crear particiones ext3 y swap\n"
+"autom谩ticamente en el espacio libre de su disco r铆gido.\n"
+"\n"
+" * \"%s\": le da acceso a caracter铆sticas adicionales:\n"
+"\n"
+" * \"%s\": guarda la tabla de particiones en un disquete. 脷til para\n"
+"recuperar la tabla de particiones m谩s adelante en caso que sea necesario.\n"
+"Es altamente recomendable realizar este paso.\n"
+"\n"
+" * \"%s\": esta opci贸n le permitir谩 restaurar una tabla de particiones\n"
+"guardada previamente en un disquete.\n"
+"\n"
+" * \"%s\": si su tabla de particiones est谩 da帽ada puede intentar\n"
+"recuperarla utilizando esta opci贸n. Por favor, tenga cuidado y recuerde que\n"
+"puede fallar.\n"
+"\n"
+" * \"%s\": descarta todos los cambios y carga su tabla de particiones\n"
+"inicial.\n"
+"\n"
+" * \"%s\": si desmarca esta opci贸n los usuarios estar谩n forzados a\n"
+"montar y desmontar manualmente los soportes removibles como los disquetes y\n"
+"los CD-ROM.\n"
+"\n"
+" * \"%s\": use esta opci贸n si desea utilizar un asistente para particionar\n"
+"su disco r铆gido. Se recomienda esto si no tiene un buen conocimiento del\n"
+"particionado.\n"
+"\n"
+" * \"%s\": use esta opci贸n para cancelar sus cambios.\n"
+"\n"
+" * \"%s\": permite realizar acciones adicionales sobre las particiones\n"
+"(tipo, opciones, formatear) y brinda m谩s informaci贸n.\n"
+"\n"
+" * \"%s\": cuando ha terminado de particionar su disco r铆gido, esto\n"
+"guardar谩 sus cambios en el disco.\n"
+"\n"
+"Cuando se define el tama帽o de una partici贸n, puede realizar un ajuste fino\n"
+"del tama帽o utilizando las teclas de las flechas de su teclado.\n"
+"\n"
+"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
+"trav茅s de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
+"\n"
+"Cuando se selecciona una partici贸n, puede utilizar:\n"
+"\n"
+" * [Ctrl][C] para crear una partici贸n nueva (cuando est谩 seleccionada una\n"
+"partici贸n vac铆a);\n"
+"\n"
+" * [Ctrl][D] para borrar una partici贸n;\n"
+"\n"
+" * [Ctrl][M] para configurar el punto de montaje.\n"
+"\n"
+"Para obtener informaci贸n sobre los distintos tipos de sistemas de archivos\n"
+"disponibles, por favor lea el cap铆tulo acerca de ext2FS del \"Manual de\n"
+"Referencia\".\n"
+"\n"
+"Si est谩 instalando en una m谩quina PPC, querr谩 crear una peque帽a partici贸n\n"
+"HFS de \"bootstrap\" de al menos 1 MB que ser谩 utilizada por el cargador de\n"
+"arranque yaboot. Si opta por hacer la partici贸n un poco m谩s grande, digamos\n"
+"50 MB, puede ver que es un lugar 煤til para almacenar un n煤cleo y ramdisk\n"
+"alternativos para arrancar en situaciones de emergencia."
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Tarjeta gr谩fica\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar autom谩ticamente la\n"
+"tarjeta gr谩fica instalada en su m谩quina. Si este no es el caso, en esta\n"
+"lista puede elegir la tarjeta que realmente posee.\n"
+"\n"
+" En caso que est茅n disponibles diferentes servidores para su tarjeta, con\n"
+"o sin aceleraci贸n de 3D, entonces se le propone elegir el servidor que\n"
+"mejor satisface sus necesidades."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Santa Luc铆a"
+msgid "There was an error installing packages:"
+msgstr "Hubo un error al instalar los paquetes:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "L铆bano"
+msgid "Lexmark inkjet configuration"
+msgstr "Configuraci贸n de impresora de inyecci贸n de tinta Lexmark"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Deshacer"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazajst谩n"
+msgid "Save partition table"
+msgstr "Guardar la tabla de particiones"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Islas Caim谩n"
+msgid "Finnish"
+msgstr "Finland茅s"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Macedonia"
+msgstr "Macedonia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Corea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"La compartici贸n por usuario utiliza el grupo \"fileshare\". \n"
+"Puede utilizar UserDrake para a帽adir un usuario a este grupo."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Corea (del Norte)"
+msgid "Slovenian"
+msgstr "Esloveno"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts y Nevis"
+msgid "Libya"
+msgstr "Libia"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comores"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Configurando los scripts, instalando el software, iniciando los servidores..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Grabar en CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Camboya"
+msgid "Table"
+msgstr "Tabla"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirguizist谩n"
+msgid "I don't know how to format %s in type %s"
+msgstr "No s茅 c贸mo formatear %s en el tipo %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenia"
+msgid "Model"
+msgstr "Modelo"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Jap贸n"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/deshabilitar libsafe si es que se encuentra en el sistema."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordania"
+msgid "Stop Server"
+msgstr "Detener el Servidor"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Seleccione un tema para\n"
+"lilo y bootsplash,\n"
+"puede elegirlos\n"
+"por separado"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Islandia"
+msgid "Modem"
+msgstr "M贸dem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Ir谩n"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumentos: (arg, listen_tcp=None)\n"
+"\n"
+"Permitir/Prohibir conexiones X. El primer argumento especifica qu茅 se hace\n"
+"en el lado cliente: ALL (permitir todas las conexiones), LOCAL (s贸lo\n"
+"conexiones locales) y NONE (ninguna conexi贸n)"
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Iraq"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Territorio Brit谩nico del Oc茅ano 脥ndico"
+msgid "Use auto detection"
+msgstr "Usar detecci贸n autom谩tica"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "India"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM a帽ade soporte del rat贸n para los programas Linux en modo texto, como\n"
+"el Midnight Commander. Tambi茅n permite operaciones de cortar-y-pegar con\n"
+"el rat贸n en la consola, e incluye soporte para men煤s emergentes en la "
+"consola."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid "Started on boot"
+msgstr "Iniciado al arranque"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irlanda"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"脷nase a los equipos de soporte de Mandrakesoft y de la Comunidad Linux en "
+"l铆nea para compartir su conocimiento y ayudar a otros convirti茅ndose en un "
+"Experto reconocido en el sitio web de soporte t茅cnico en l铆nea:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Se pueden configurar las opciones siguientes para personalizar\n"
+"la seguridad de su sistema. Si necesita explicaci贸n, mire la ayuda "
+"emergente.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hungr铆a"
+msgid "Automatically find available printers on remote machines"
+msgstr "Encontrar autom谩ticamente impresoras disponibles en m谩quinas remotas"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Hait铆"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Guardar en cinta en el dispositivo: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Croacia"
+msgid "East Timor"
+msgstr "Timor Oriental"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Borrar perfil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Islas Heard y McDonald"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir/Prohibir la lista de usuarios del sistema en administradores de "
+"conexi贸n (kdm y gdm)"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Installing Foomatic..."
+msgstr "Instalando Foomatic ..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "China"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Por favor salga de la sesi贸n y luego pulse Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "detectada"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Se necesita reiniciar la red. 驴Desea reiniciarla?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Paquete:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "No se puede escribir /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Islas Georgia del Sur y Sandwich del Sur"
+msgid "SECURITY WARNING!"
+msgstr "隆ADVERTENCIA DE SEGURIDAD!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guinea Ecuatorial"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadalupe"
+msgid "No, I don't want autologin"
+msgstr "No, no deseo entrada autom谩tica"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Herramienta para migrar desde Windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "Todos los idiomas"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Groenlandia"
+msgid "Removing %s"
+msgstr "Borrando %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Probando su conexi贸n..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Tama帽o del cach茅"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Guayana Francesa"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Las contrase帽as est谩n activadas, pero tampoco se recomienda usar este\n"
+"nivel para un ordenador conectado a una red."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid "Start sector: "
+msgstr "Sector de comienzo: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Granada"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Reino Unido"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Se necesita instalar el paquete %s. 驴Quiere instalarlo?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gab贸n"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Islas Feroe"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake ha comparado el modelo que result贸 de la detecci贸n autom谩tica "
+"con los modelos listados en su base de datos de impresoras para encontrar la "
+"mejor coincidencia. Esta elecci贸n puede estar equivocada, especialmente si "
+"su impresora no est谩 listada en absoluto en la base de datos. Entonces, "
+"verifique si la elecci贸n es correcta y haga clic en \"El modelo es correcto"
+"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
+"forma tal que pueda elegir el modelo de su impresora manualmente en la "
+"pantalla siguiente.\n"
+"\n"
+"Para su impresora Printerdrake ha encontrado:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
+msgid "Bad password on %s"
+msgstr "Contrase帽a incorrecta en %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Islas Malvinas"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Hay una impresaora desconocida conectada directamente a su sistema"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fidji"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finlandia"
+msgid "Security Administrator (login or email)"
+msgstr "Administrador de la seguridad (login o correo electr贸nico)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiop铆a"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Lo siento, s贸lo se soportan los n煤cleos 2.4."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Espa帽a"
+msgid "Romanian (qwerty)"
+msgstr "Rumano (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "En desarrollo ... por favor, espere."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Sahara Oeste"
+msgid "Czech Republic"
+msgstr "Rep煤blica Checa"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egipto"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Argelia"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Rep煤blica Dominicana"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Dinamarca"
+msgid "Old configuration (isdn4net)"
+msgstr "Configuraci贸n antigua (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibuti"
+msgid "Sound card"
+msgstr "Tarjeta de sonido"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Chipre"
+msgid "Import Fonts"
+msgstr "Importaci贸n de tipograf铆as"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Isla Navidad"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Tiene una partici贸n Microsoft Windows de gran tama帽o.\n"
+"Le sugiero que primero cambie el tama帽o de la misma\n"
+"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cabo Verde"
+msgid "Suppress Temporary Files"
+msgstr "Suprimir archivos temporales"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Change partition type"
+msgstr "Cambiar el tipo de partici贸n"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Colombia"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Resoluci贸n\n"
+"\n"
+" Aqu铆 puede elegir las resoluciones y profundidades de color entre\n"
+"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
+"necesidades (tenga presente que eso se puede cambiar luego de la\n"
+"instalaci贸n) En el monitor se muestra un ejemplo de la configuraci贸n\n"
+"elegida."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Camer煤n"
+msgid "Network Options"
+msgstr "Opciones de red"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Mostrar tema\n"
+"bajo la consola"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Islas Cook"
+msgid "Statistics"
+msgstr "Estad铆sticas"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Costa de Marfil"
+msgid "(on %s)"
+msgstr "(en %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Suiza"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Una biblioteca que le defiende ante ataques de desbordamiento de b煤fer y "
+"ataques con cadenas de formato."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Rep煤blica Centroafricana"
+msgid "average"
+msgstr "promedio"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Nuevo nombre de la impresora"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Islas Cocos (Keeling)"
+msgid "Equatorial Guinea"
+msgstr "Guinea Ecuatorial"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Canad谩"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir/Prohibir conexi贸n autom谩tica."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belice"
+msgid "Build Backup"
+msgstr "Realizar copia de respaldo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Bielorrusia"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Para imprimir un archivo desde la l铆nea de comando (ventana de terminal) use "
+"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "En este momento no hay alternativa posible"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Isla Bouvet"
+msgid "Romanian (qwertz)"
+msgstr "Rumano (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "But谩n"
+msgid "Write Config"
+msgstr "Escribir configuraci贸n"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"El demonio routed permite actualizar autom谩ticamente las tablas de "
+"enrutamiento IP\n"
+"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
+"peque帽as,\n"
+"para redes m谩s complejas, se necesitan protocolos de enrutamiento m谩s "
+"complejos."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasil"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Permitir/Prohibir conexi贸n remota de root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Browse"
+msgstr "Examinar"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CD-ROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Ben铆n"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "驴Desea intentar conectarse a Internet ahora?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belga"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrein"
+msgid "Do you have an ISA sound card?"
+msgstr "驴Tiene una tarjeta de sonido ISA?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgaria"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"No se ha detectado ning煤n adaptador de red ethernet en su sistema.\n"
+"No se puede configurar este tipo de conexi贸n."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "No se pueden realizar instant谩neas de pantalla antes del particionado"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Nombre del host"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia Herzegovina"
+msgid "/File/Save _As"
+msgstr "/Archivo/Guardar _Como"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbay谩n"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Para acceder a impresoras en servidores CUPS remotos en su red local, s贸lo "
+"necesita habilitar la opci贸n \"Encontrar autom谩ticamente impresoras "
+"disponibles en m谩quinas remotas\"; los servidores CUPS informan a la m谩quina "
+"autom谩ticamente sobre sus impresoras. Todas las impresoras que su m谩quina "
+"conoce corrientemente se listan en la secci贸n \"Impresoras remotas\" en la "
+"ventana principal de Printerdrake. Si sus servidores CUPS no est谩n en su red "
+"local, tiene que ingresar aqu铆 las direcciones IP y opcionalmente los "
+"n煤meros de puerto para obtener la informaci贸n de las impresoras de los "
+"servidores."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
+"%s no est谩 en la base de datos de esc谩neres, 驴configurarlo manualmente?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australia"
+msgid "Delay before booting default image"
+msgstr "Demora antes de arrancar la imagen predeterminada"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa Americana"
+msgid "Restrict command line options"
+msgstr "Restringir las opciones de la l铆nea de comandos"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "Europa del este"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Ant谩rtica"
+msgid "Use free space"
+msgstr "Usar el espacio libre"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "usar dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antillas Holandesas"
+msgid "Mail alert"
+msgstr "Alerta por correo"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenia"
+msgid "Internet configuration"
+msgstr "Configuraci贸n de Internet"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albania"
+msgid "Uzbekistan"
+msgstr "Uzbekist谩n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Detectada %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua y Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Autodetectar im_presoras"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Emiratos 脕rabes Unidos"
+msgid "Finish"
+msgstr "Finalizar"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "Mostrar los paquetes seleccionados autom谩ticamente"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganist谩n"
+msgid "CPU flags reported by the kernel"
+msgstr "Flags del CPU reportados por el n煤cleo"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montajes circulares %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Quite los vol煤menes l贸gicos primero\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"El soporte PCMCIA no existe en los n煤cleos 2.2. Por favor, utilice un n煤cleo "
-"2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "隆MUEVA SU RUEDA!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Para activar el rat贸n,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Pruebe su rat贸n, por favor."
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Sin rat贸n"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "隆Ocurri贸 algo malo! - 驴Est谩 instalado mkisofs?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "ninguno"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botones"
+msgid "Please try again"
+msgstr "Vuelva a intentarlo, por favor"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 botones"
+msgid "The model is correct"
+msgstr "El modelo es correcto"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 bot贸n"
+msgid "FAT resizing failed: %s"
+msgstr "Fall贸 el redimensionado de la FAT: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "rat贸n bus"
+msgid "Individual package selection"
+msgstr "Selecci贸n de paquetes individuales"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Esta partici贸n no es redimensionable"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Rat贸n Logitech (serie, antiguo tipo C7)"
+msgid "Location"
+msgstr "Ubicaci贸n"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "EEUU (cable-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "S. de a. con journal"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Esta m谩quina"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrein"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "omitir m贸dulos scsi"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Rat贸n de 3 botones gen茅rico"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Familia de la CPU (ej: 6 para clase i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Rat贸n de 2 botones gen茅rico"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Puesto que est谩 realizando una instalaci贸n por red, su red ya est谩 "
+"configurada.\n"
+"Haga clic sobre aceptar para mantener su configuraci贸n, o pulse cancelar "
+"para\n"
+"volver a configurar sus conexiones de red y a Internet.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "serie"
+msgid "Keyboard layout: %s\n"
+msgstr "Distribuci贸n del teclado: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Aqu铆 puede elegir si las impresoras conectadas a esta m谩quina deber铆an poder "
+"accederse desde m谩quinas remotas y desde qu茅 m谩quinas remotas."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rueda"
+msgid "Maltese (US)"
+msgstr "Malt茅s (EE.UU.)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Gen茅rico"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
+"compartidos por medio de la red; como NFS (Network File System),\n"
+"SMB (Lan Manager/Windows) y NCP (Netware)"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "Tarjeta de TV"
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Cambiar al modo normal"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rat贸n gen茅rico PS2 con rueda"
+msgid "Size"
+msgstr "Tama帽o"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Est谩ndar"
+msgid "Greenland"
+msgstr "Groenlandia"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Rat贸n Sun"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Cambiar entre vista plana y ordenada por grupos"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Contraer el 谩rbol"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Expandir el 谩rbol"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "驴Es correcto?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error al escribir en el archivo %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Archivo de respaldo incorrecto"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Fall贸 la restauraci贸n a partir del archivo %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "No es la cinta adecuada. La cinta est谩 etiquetada %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
-"La 煤nica soluci贸n es desplazar sus particiones primarias para que el hueco "
-"est茅 despu茅s de las particiones extendidas"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "La partici贸n extendida no est谩 disponible en esta plataforma"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "mount fall贸: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "quiz谩s"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "bueno"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "muy bueno"
+"Ya se ha realizado la configuraci贸n de la conexi贸n compartida a Internet.\n"
+"Ahora est谩 activa.\n"
+"\n"
+"驴Qu茅 desea hacer?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "importante"
+msgid "Delete All NBIs"
+msgstr "Borrar todos los NBI"
-#: ../../pkgs.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "must have"
-msgstr "necesario"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Este di谩logo le permite un ajuste fino de su cargador de arranque:\n"
+"\n"
+" * \"%s\": hay tres opciones para su cargador de arranque:\n"
+"\n"
+" * \"%s\": si prefiere a grub (men煤 de texto).\n"
+"\n"
+" * \"%s\": si prefiere a LILO con su interfaz de texto.\n"
+"\n"
+" * \"%s\": si prefiere a LILO con su interfaz gr谩fica.\n"
+"\n"
+" * \"%s\": en la mayor铆a de los casos, no cambiar谩 lo predeterminado\n"
+"(\"%s\"), pero si lo prefiere el cargador de arranque se puede instalar en\n"
+"el segundo disco r铆gido (\"%s\") o incluso en un disquete (\"%s\")\n"
+"\n"
+" * \"%s\": luego de arrancar o volver a arrancar la computadora, esta es la\n"
+"demora que se garantiza al usuario para elegir, en el men煤 del cargador de\n"
+"arranque, una entrada distinta a la predeterminada.\n"
+"\n"
+"!! Tenga presente que si no elige instalar un cargador de arranque\n"
+"(seleccionando \"%s\"), 隆debe asegurarse que tiene una forma de arrancar a\n"
+"su sistema Mandrake Linux! Tambi茅n debe asegurarse que sabe lo que hace\n"
+"antes de cambiar cualquier opci贸n. !!\n"
+"\n"
+"Haciendo clic sobre el bot贸n \"%s\" en este di谩logo se le ofrecer谩n\n"
+"opciones avanzadas que est谩n reservadas para el usuario experto."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"si est谩 activo, enviar el correo de reporte a esta direcci贸n, caso contrario "
+"a root."
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "Fall贸 mkraid"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "驴Qu茅 tipo de configuraci贸n de XFree desea tener?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Fall贸 mkraid (驴quiz谩s no est茅n las herramientas de raid (raidtools)?)"
+msgid "More"
+msgstr "M谩s"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No se puede a帽adir una partici贸n al RAID md%d _ya formateado_"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Con este nivel de seguridad, es posible utilizar el sistema como un "
+"servidor.\n"
+"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
+"servidor que acepte conexiones de m煤ltiples clientes. Nota: si su m谩quina "
+"s贸lo es un cliente en la Internet, mejor deber铆a elegir un nivel inferior."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Parar"
+msgid "Account Password"
+msgstr "Contrase帽a de la cuenta"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "Iniciar"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Decidi贸 instalar el cargador de arranque en una partici贸n.\n"
+"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
+"arranca (ej.: System Commander).\n"
+"\n"
+"驴Desde qu茅 disco arranca?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Al iniciar"
+msgid "Tajik keyboard"
+msgstr "Teclado tajik"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"No hay informaci贸n adicional para\n"
-"este servicio. Disculpe."
+"Puede copiar la configuraci贸n de la impresora que ha realizado para la cola %"
+"s a %s, su cola corriente. Todos los datos de configuraci贸n (nombre de la "
+"impresora, descripci贸n, ubicaci贸n, tipo de conexi贸n, y opciones "
+"predeterminadas) se transfieren, pero los trabajos de impresi贸n no se "
+"transfieren.\n"
+"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servicios y demonios"
+msgid "Font List"
+msgstr "Lista de tipograf铆as"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "parado"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
+" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
+" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
+" reiniciar e introduzca:\n"
+" setenv boot-device %s, \\\\:tbxi\n"
+" Luego escriba: shut-down\n"
+"La pr贸xima vez que arranque deber铆a ver el prompt del cargador de arranque."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "corriendo"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Parece que tiene una m谩quina desconocida o una OldWorld,\n"
+"El gestor de arranque yaboot no funcionar谩 en la misma.\n"
+"La instalaci贸n continuar谩, pero necesitar谩\n"
+"utilizar BootX o alguna otra manera para arrancar su m谩quina"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Seleccione qu茅 servicios se deben iniciar autom谩ticamente al arrancar"
+msgid "Select file"
+msgstr "Elija un archivo"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Servidor de base de datos"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"Elija la red o host donde se deber铆an hacer disponibles las impresoras "
+"locales:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Administraci贸n remota"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Estos comando tambi茅n se utilizan en el campo \"Comando de impresi贸n\" de "
+"los di谩logos de impresi贸n de muchas aplicaciones, pero aqu铆 no se indica el "
+"nombre del archivo porque el archivo a imprimir lo proporciona la "
+"aplicaci贸n.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Compartir archivos"
+msgid "Japan"
+msgstr "Jap贸n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "Imprimir lista de opciones"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Imprimiendo"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Se ha realizado el cambio, pero no se har谩 efectivo hasta que salga"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia el servidor de tipograf铆as X11 (obligatorio para correr XFree)."
+msgid "Search servers"
+msgstr "Buscar servidores"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Carga los controladores para sus dispositivos USB."
+msgid "NCP queue name missing!"
+msgstr "隆No se encuentra la cola del servidor NCP!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Syslog es el servicio a trav茅s del que varios demonios van a enviar\n"
-"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
-"de registro(log). Es una buena idea ejecutar siempre syslog."
+"Atenci贸n, se ha detectado otra conexi贸n con la Internet, tal vez usando su "
+"red"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lanza el sistema de sonido en su m谩quina"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM etiquetado como \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
-"de todos los usuarios conectados a una m谩quina que ejecuta el demonio rwho\n"
-"(similar al finger)."
+"Guarda y recupera el mecanismo de entrop铆a del sistema; usado para la\n"
+"generaci贸n de n煤meros aleatorios de gran calidad."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"El protocolo rusers permite que los usuarios de una red identifiquen\n"
-"quien est谩 conectado en otras m谩quinas que respondan."
+"Fall贸 la verificaci贸n del sistema de archivos %s. 驴Desea reparar los "
+"errores? (cuidado, puede perder datos)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocolo rstat permite a los usuarios de una red recoger\n"
-"informaci贸n sobre el rendimiento de cualquier m谩quina de dicha red."
+msgid "Turn your computer into a reliable server"
+msgstr "Convierta su m谩quina en un servidor confiable."
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El demonio routed permite actualizar autom谩ticamente las tablas de "
-"enrutamiento IP\n"
-"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
-"peque帽as,\n"
-"para redes m谩s complejas, se necesitan protocolos de enrutamiento m谩s "
-"complejos."
+msgid " (driver %s)"
+msgstr " (controlador %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Asignar dispositivos 'crudos' a dispositivos de bloque (como las particiones "
-"de los discos), para usar aplicaciones como Oracle o reproductores DVD"
+"Archivo(s) de loopback:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda y recupera el mecanismo de entrop铆a del sistema; usado para la\n"
-"generaci贸n de n煤meros aleatorios de gran calidad."
+msgid "I don't know"
+msgstr "No lo s茅"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix es un agente de transporte de correo (MTA), es decir el programa "
-"encargado de enviar el correo electr贸nico de una m谩quina a otra."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", host TCP/IP \"%s\", puerto %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
-"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
-"act煤an\n"
-"como servidores para protocolos que usan el mecanismo RPC."
+"Est谩 a punto de configurar el un disquete de Instalaci贸n Autom谩tica. Esta "
+"caracter铆stica es algo peligrosa y debe ser utilizada con cuidado.\n"
+"\n"
+"Con esa caracter铆stica, podr谩 repetir la instalaci贸n que ha realizado en "
+"esta computadora, y se le consultar谩 interactivamente en algunos pasos, para "
+"poder cambiar los valores de los mismos.\n"
+"\n"
+"Para m谩xima seguridad, el particionado y formateado nunca ser谩 realizado "
+"autom谩ticamente, sin importar lo que eligi贸 durante la instalaci贸n de esta "
+"computadora.\n"
+"\n"
+"驴Desea continuar?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
-"de red o m贸dems en ordenadores port谩tiles. No se iniciar谩 salvo que\n"
-"est茅 configurado, por lo que no es un problema tenerlo instalado\n"
-"en m谩quinas que no lo necesiten."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Admitir las win-impresoras OKI 4w y compatibles."
+"\n"
+"\n"
+"Actualmente su tarjeta usa el controlador %s\"%s\" (el controlador predet. "
+"para su tarjeta es \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activar el bloqueo num茅rico autom谩ticamente bajo la consola y\n"
-"XFree al arrancar."
+msgid "Post Uninstall"
+msgstr "Post-desinstalaci贸n"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de servidor NFS, que se "
-"configura\n"
-"a trav茅s del archivo /etc/exports."
+msgid "Cpuid level"
+msgstr "Nivel de cpuid"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
-"en el arranque del sistema."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongol (cir铆lico)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
-"compartidos por medio de la red; como NFS (Network File System),\n"
-"SMB (Lan Manager/Windows) y NCP (Netware)"
+msgid "Add a module"
+msgstr "Agregar un m贸dulo"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
-"los nombres de m谩quinas en direcciones IP."
+msgid "Profile to delete:"
+msgstr "Perfil a borrar:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
-"rendimiento y alta disponibilidad."
+msgid "Local measure"
+msgstr "Medida local"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd es el demonio de impresi贸n, necesario para que lpr funcione\n"
-"correctamente. B谩sicamente, es un servidor que coloca las tareas de\n"
-"impresi贸n en las colas de impresi贸n adecuadas para cada impresora."
+msgid "busmouse"
+msgstr "rat贸n bus"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf a veces realizar谩 varias tareas al arrancar para\n"
-"mantener la configuraci贸n del sistema."
+msgid "Account Login (user name)"
+msgstr "Usuario de la cuenta (nombre de usuario)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detecci贸n y configuraci贸n autom谩tica del hardware al arrancar."
+msgid "Fdiv bug"
+msgstr "Bug de Fdiv"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Regeneraci贸n autom谩tica de la cabecera del n煤cleo en /boot para\n"
-"/usr/include/linux/{autoconf,version}.h"
+"Configuraci贸n de drakfirewall\n"
+"\n"
+"Debe asegurarse que ha configurado su acceso de Red/Internet con\n"
+"drakconnect antes de continuar."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga la definici贸n de teclado que se indica en\n"
-"/etc/sysconfig/keyboard. Puede ser configurado con el programa kbdconfig.\n"
-"Debe dejarse activo en la mayor铆a de las m谩quinas."
+msgid "Benin"
+msgstr "Ben铆n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanza el filtrado de paquetes para los n煤cleos de Linux de la serie 2.2,\n"
-"para configurar un cortafuegos que protege a su m谩quina de los ataques de la "
-"red."
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El demonio para el superservidor de Internet (normalmente llamado inetd) "
-"inicia\n"
-"una variedad de servicios adicionales de internet seg煤n sea necesario.\n"
-"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
-"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
-"dependen de 茅l."
+msgid "Path selection"
+msgstr "Selecci贸n de ruta"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache es un servidor de p谩ginas web. Se usa para servir archivos HTML y "
-"programas CGI."
+msgid "Name/IP address of host:"
+msgstr "Nombre/direcci贸n IP del host:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
-"el hardware nuevo/cambiado."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"GPM a帽ade soporte del rat贸n para los programas Linux en modo texto, como\n"
-"el Midnight Commander. Tambi茅n permite operaciones de cortar-y-pegar con\n"
-"el rat贸n en la consola, e incluye soporte para men煤s emergentes en la "
-"consola."
+"Est谩 ocurriendo algo malo en su unidad. \n"
+"Ha fallado una prueba para verificar la integridad de los datos. \n"
+"Esto significa que escribir cualquier cosa en el disco terminar谩 produciendo "
+"datos aleatorios, corruptos."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron es un programa UNIX est谩ndar que ejecuta programas especificados por\n"
-"el usuario peri贸dicamente. El cron de Vixie a帽ade varias funcionalidades al "
-"cron de Unix \n"
-"b谩sico, incluyendo una mayor seguridad y opciones de configuraci贸n m谩s "
-"potentes."
+msgid "Printer host name or IP missing!"
+msgstr "隆Falta el nombre de host o la IP de la impresora!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Please check all users that you want to include in your backup."
msgstr ""
-"Ejecuta los comandos programados por el comando at en el momento\n"
-"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
-"la carga promedio del sistema es suficientemente baja."
+"Por favor, marque a todos los usuarios que desa incluir en la copia de "
+"respaldo"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"apmd se usa para monitorizar el estado de las bater铆as y enviar esa\n"
-"informaci贸n a syslogd. Tambi茅n puede usarse para apagar el equipo cuando\n"
-"la bater铆a est谩 casi descargada."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, un planificador de comandos peri贸dicos."
+"Printerdrake debe configurar el %s.\n"
+"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
+"secci贸n Hardware."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Installing packages..."
-msgstr "Instalando paquetes..."
+msgid "Japan (cable)"
+msgstr "Jap贸n (cable)"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
"\n"
-"Uso: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] "
-"[-v|--version] "
+"Bienvenido al Asistente de configuraci贸n de la impresora\n"
+"\n"
+"Este asistente lo ayudar谩 a instalar sus impresoras conectadas a esta "
+"computadora, conectadas directamente a la red o a una m谩quina Windows "
+"remota.\n"
+"\n"
+"Si tiene impresoras conectadas a esta m谩quina, por favor enci茅ndalas para "
+"que se puedan detectar autom谩ticamente. Tambi茅n deben estar conectadas y "
+"encendidas sus impresoras de red y sus m谩quinas Windows.\n"
+"\n"
+"Note que la detecci贸n autom谩tica de impresoras en la red toma m谩s tiempo que "
+"s贸lo detectar las impresoras conectadas a esta m谩quina. Entonces, desactive "
+"la detecci贸n autom谩tica de impresoras de red o en m谩quinas Windows cuando no "
+"la necesita.\n"
+"\n"
+"Haga clic sobre \"Siguiente\" cuando est茅 listo, o sobre \"Cancelar\" si "
+"Usted no desea configurar sus impresoras ahora."
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resoluci贸n"
+msgid "Initial tests"
+msgstr "Pruebas iniciales"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=disp.] [--update-sane=dir_fuente_sane] [--update-"
-"usbtable] [--dynamic=disp.]"
+msgid "Continue"
+msgstr "Continuar"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Custom Restore"
+msgstr "Restauraci贸n personalizada"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"[OPCI脫N]...\n"
-" --no-confirmation no pedir confirmaci贸n en modo MandrakeUpdate\n"
-" --no-verify-rpm no verificar firmas de los paquetes\n"
-" --changelog-first mostrar changelog antes de lista de archivos en "
-"ventana de descripci贸n\n"
-" --merge-all-rpmnew proponer mezclar todos los archivos .rpmnew/.rpmsave "
-"encontrados"
+"\"%s\": si se detecta una tarjeta de sonido en su sistema, la misma se\n"
+"muestra aqu铆. Si nota que la tarjeta de sonido mostrada no es la que est谩\n"
+"realmente instalada en su sistema, puede hacer clic sobre el bot贸n y elegir\n"
+"otro controlador."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr "[--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Script-based"
+msgstr "Por script"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPCIONES]\n"
-"Aplicaci贸n de monitoreo y conexi贸n de Internet y redes\n"
-"\n"
-"--defaultintf interfaz : mostar esta interfaz por defecto\n"
-"--connect : conectar a la Internet si no est谩 conectado\n"
-"--disconnect : desconectar de la Internet si est谩 conectado\n"
-"--force : utilizado con (dis)connect: forzar (des)conexi贸n.\n"
-"--status : devuelve 1 si est谩 conectado, 0 en caso "
-"contrario.\n"
-"--quiet : no ser interactivo. A utilizar con (dis)connect."
+msgid "Error reading file %s"
+msgstr "Error al leer el archivo %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=miarchivo] [--word=mipalabra] [--explain=regexp] [--alert]"
+msgid "PLL setting:"
+msgstr "Configuraci贸n del PLL :"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[teclado]"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Debe tener una partici贸n FAT montada en /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPCIONES]...\n"
-"Configurador del Servidor de Terminales de Mandrake (MTS)\n"
-"--enable : habilitar MTS\n"
-"--disable : deshabilitar MTS\n"
-"--start : iniciar MTS\n"
-"--stop : detener MTS\n"
-"--adduser : a帽adir usuario existente a MTS (necesita "
-"nombre_de_usuario)\n"
-"--deluser : quitar usuario existente de MTS (necesita "
-"nombre_de_usaurio)\n"
-"--addclient : a帽adir m谩quina cliente a MTS (necesita direcci贸n MAC, IP, "
-"nombre imagen nbi)\n"
-"--delclient : quitar m谩quina cliente de MTS (necesita direcci贸n MAC, "
-"IP, nombre imagen nbi)"
+msgid " on "
+msgstr " en "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Aplicaci贸n de importaci贸n y monitoreo de tipograf铆as\n"
-"--windows_import : importar desde todas las particiones Windows "
-"disponibles.\n"
-"--xls_fonts : mostrar todas las tipograf铆as que ya existen en xls\n"
-"--strong : verificaci贸n fuerte de las tipograf铆as.\n"
-"--install : aceptar cualquier tipograf铆a o directorio de "
-"tipograf铆as.\n"
-"--uninstall : desinstalar cualquier tipograf铆a o directorio de tipog.\n"
-"--replace : reemplazar las tipograf铆as si ya existen.\n"
-"--application : 0 ninguna aplicaci贸n.\n"
-" : 1 todas las aplicaciones soportadas disponibles.\n"
-" : nombre_de_aplicaci贸n como por ej. so para staroffice\n"
-" y gs para ghostscript."
+msgid "The URL must begin with http:// or https://"
+msgstr "La URL deber铆a empezar con http:// o https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPCIONES] [NOMBRE_PROGRAMA]\n"
-"\n"
-"OPCIONES:\n"
-" --help - imprime este mensaje.\n"
-" --report - programa deber铆a ser una herramienta mandrake\n"
-" --incident - programa deber铆a ser una herramienta mandrake"
+"Puede especificar directamente el URI para acceder a la impresora. El URI "
+"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
+"los sistemas de impresi贸n admiten URIs."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Otro SO (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Install/Upgrade"
+msgstr "Instalaci贸n/Actualizaci贸n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paquetes"
#: ../../standalone.pm:1
#, c-format
@@ -7550,4905 +6944,5391 @@ msgstr ""
"--help : muestra este mensaje.\n"
"--version : muestra el n煤mero de versi贸n.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Se necesita autenticaci贸n de dominio"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-" Este programa es software libre; puede redistribuirlo y/o modificarlo\n"
-" bajo los t茅rminos de la Licencia P煤blica General GNU publicada por la\n"
-" Free Software Foundation; ya sea la versi贸n 2, o (a su opci贸n) cualquier\n"
-" versi贸n posterior.\n"
"\n"
-" Este programa se distribuye con la esperanza que ser谩 煤til, pero\n"
-" SIN GARANT脥A ALGUNA; incluso sin la garant铆a impl铆cita de COMERCIABILIDAD\n"
-" o ADECUABILIDAD PARA UN PROP脫SITO PARTICULAR. Consulte la\n"
-" Licencia P煤blica General GNU para m谩s detalles.\n"
"\n"
-" Deber铆a haber recibido una copia de la Licencia P煤blica General GNU\n"
-" junto con este programa; de no ser as铆, escriba a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Salir de la instalaci贸n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Instalar actualizaciones"
+" Gracias:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Servicios al inicio"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Configuraci贸n de X"
+msgid "Use libsafe for servers"
+msgstr "Utilizar libsafe para los servidores"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Cargador de arranque"
+msgid "Icelandic"
+msgstr "Island茅s"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Configurar la red"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Uso: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] "
+"[-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "A帽adir un usuario"
+msgid "Please relog into %s to activate the changes"
+msgstr "Abra de nuevo una sesi贸n %s para activar los cambios"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Contrase帽a de root"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Instalar el sistema"
+msgid "Lilo/grub mode"
+msgstr "Modo de Lilo/Grub"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Elija los paquetes a instalar"
+msgid "Output"
+msgstr "Salida"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formateo de particiones"
+msgid "Circular mounts %s\n"
+msgstr "Montajes circulares %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Particionando"
+msgid "Martinique"
+msgstr "Martinica"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Elija su teclado"
+msgid "HardDrive / NFS"
+msgstr "Disco r铆gido / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Tipo de instalaci贸n"
+msgid "a number"
+msgstr "un n煤mero"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Detecci贸n del disco r铆gido"
+msgid "Swedish"
+msgstr "Sueco"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Configuraci贸n del rat贸n"
+msgid "Which %s driver should I try?"
+msgstr "驴Qu茅 controlador de %s debo probar?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licencia"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"Recibir谩 una alerta si alguno de ls servicios seleccionados ya no est谩 "
+"corriendo"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Elija su idioma"
+msgid "Filesystem types:"
+msgstr "Tipos de sistemas de archivos:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", dispositivo multifunci贸n en HP JetDirect"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Aceptar"
+msgid "Northern Mariana Islands"
+msgstr "Islas Marianas del Norte"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ninguno"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "usuario :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalaci贸n del controlador de la pantalla)"
+msgid "Please enter your password"
+msgstr "Por favor, ingrese su contrase帽a"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Su tarjeta puede admitir aceleraci贸n 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleraci贸n 3D EXPERIMENTAL por hardware"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Su tarjeta puede admitir aceleraci贸n 3D por hardware con XFree %s."
+"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleraci贸n 3D por hardware"
+msgid "Floppy"
+msgstr "Disquete"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta s贸lo puede admitir aceleraci贸n de 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
-"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Por favor, marque si desea borrar su soporte regrabable (1er. sesi贸n)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta puede admitir aceleraci贸n 3D pero s贸lo con XFree %s.\n"
-"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
+msgid "Ghostscript referencing"
+msgstr "Referenciando a Ghostscript"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Cargador de arranque"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Configurar s贸lo la tarjeta \"%s\"%s"
+msgid "Move"
+msgstr "Desplazar"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Usar extensi贸n Xinerama"
+msgid "Bootloader to use"
+msgstr "Cargador de arranque a usar"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Configurar los monitores independientemente"
+msgid "SMB server host"
+msgstr "M谩quina del servidor SMB"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "驴Qu茅 tipo de configuraci贸n de XFree desea tener?"
+msgid "Name Servers:"
+msgstr "Servidores de nombres:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Configuraci贸n de XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Importante\n"
+"\n"
+"Haga el favor de leer cuidadosamente el presente documento. En caso de "
+"desacuerdo\n"
+"con el presente documento, no est谩 autorizado a instalar los dem谩s\n"
+"CD. En este caso seleccione 'Rechazar' para seguir la instalaci贸n sin\n"
+"estos CD.\n"
+"\n"
+"\n"
+"Algunos componentes de software contenidos en los siguientes CD no\n"
+"est谩n sometidos a las licencias GPL o similares que permitan la copia,\n"
+"adaptaci贸n o redistribuci贸n. Cada uno de los componentes de software\n"
+"esta distribuido bajo los t茅rminos y condiciones de un acuerdo de\n"
+"licencia propio. Por favor, dir谩jase a 茅ste y ac茅ptelo antes de instalarlo,\n"
+"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
+"copia (salvo las destinadas a copias de seguridad), la distribuci贸n, "
+"descompilaci贸n,\n"
+"desensamblado, ingenier铆a inversa, reconstituci贸n de la l贸gica del\n"
+"programa y/o modificaci贸n, salvo en la medida y para las necesidades\n"
+"autorizadas por las leyes vigentes. Toda violaci贸n de la licencia\n"
+"vigente implica generalmente la caducidad de est谩, sin perjuicio a\n"
+"todos los dem谩s derechos o acciones dirigidos en contra de Ud. Salvo si\n"
+"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
+"en m谩s de una m谩quina, ni adaptarlos para un uso en red. Si fuese\n"
+"necesario, contacte con el distribuidor de cada programa para\n"
+"obtener licencias adicionales. La distribuci贸n a terceros de copias de\n"
+"los programas o de la documentaci贸n que lo acompa帽a generalmente\n"
+"suele estar prohibida.\n"
+"\n"
+"\n"
+"Todos los derechos, t铆tulos e intereses de esos programas son la\n"
+"propiedad exclusiva de sus autores respectivos y est谩n protegidos por el\n"
+"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
+"del software.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Seleccione la cantidad de memoria de su tarjeta gr谩fica"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Quitar esta impresora de Star Office/OpenOffice.org/GIMP"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Su sistema soporta configuraci贸n multi-monitor.\n"
-"驴Qu茅 desea hacer?"
+"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
+"rendimiento y alta disponibilidad."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Configuraci贸n multi-monitor"
+msgid "4 billion colors (32 bits)"
+msgstr "4 billones de colores (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Seleccione un servidor X"
+msgid "Micronesia"
+msgstr "Micronesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "Servidor X"
+msgid "License"
+msgstr "Licencia"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB o m谩s"
+msgid "This may take a moment to generate the keys."
+msgstr "La generaci贸n de claves puede tardar unos momentos."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
+"Detecci贸n autom谩tica de impresora (Impresoras locales, TCP/Socket, y SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (usando pppoa) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Ocurri贸 un error - no se encontr贸 ning煤n dispositivo v谩lido para crear los "
+"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
+"raz贸n de este fallo"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Iniciar el sistema de impresi贸n al arrancar"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "驴Desea iniciar su conexi贸n al arrancar?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "ID del procesador"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "Sound trouble shooting"
+msgstr "Soluci贸n de problemas de sonido"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid "Polish (qwerty layout)"
+msgstr "Polaco (distribuci贸n qwerty)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "activar ahora"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"驴Conservar los cambios?\n"
-"La configuraci贸n actual es:\n"
"\n"
-"%s"
+"Actividades de Drakbackup por medio de CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Opciones"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Va a instalar el sistema de impresi贸n %s sobre un sistema corriendo en el "
+"nivel de seguridad %s.\n"
+"\n"
+"Este sistema de impresi贸n ejecuta un demonio (proceso en segundo plano) que "
+"espera trabajos de impresi贸n y los gestiona. Las m谩quinas remotas pueden "
+"acceder tambi茅n a este demonio a trav茅s de la red, as铆 que es un potencial "
+"punto de ataque. Por eso, s贸lo unos pocos demonios seleccionados se inician "
+"por defecto en este nivel de seguridad.\n"
+"\n"
+"驴Seguro que desea configurar la impresi贸n para esta m谩quina?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Probar"
+msgid "Host \"%s\", port %s"
+msgstr "Host \"%s\", puerto %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Resoluci贸n"
+msgid "This partition can't be used for loopback"
+msgstr "Esta partici贸n no puede usarse para el loopback"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "El archivo ya existe. 驴Desea usarlo?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Tarjeta gr谩fica"
+msgid "received: "
+msgstr "recibido: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de barrido vertical"
+msgid "Right Alt key"
+msgstr "Tecla Alt derecha"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de barrido horizontal"
+msgid "the list of alternative drivers for this sound card"
+msgstr "la lista de controladores alternativos para esta tarjeta de sonido"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Los dos par谩metros cr铆ticos son la frecuencia de barrido vertical, que "
-"indica la frecuencia\n"
-"a la cual se refresca la pantalla entera, y m谩s importante a煤n, la "
-"frecuencia de sincronizaci贸n\n"
-"horizontal, la cual es la frecuencia de las l铆neas de barrido horizontal.\n"
-"\n"
-"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
-"frecuencia de sincronizaci贸n superior a la capacidad real de su monitor:\n"
-"puede da帽ar su monitor.\n"
-" En caso de duda, elija una configuraci贸n conservadora."
+msgid "Gateway"
+msgstr "Pasarela"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Fall贸 la prueba Plug'n Play. Por favor, elija un monitor espec铆fico"
+msgid "Scanner sharing"
+msgstr "Compartir esc谩ner"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Fabricante"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunicia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Elija un monitor"
+msgid "Profile: "
+msgstr "Perfil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Tarjeta gr谩fica: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Haga clic sobre un dispositivo en el 谩rbol de la izquierda para obtener aqu铆 "
+"informaci贸n sobre el mismo."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Elija la resoluci贸n y la profundidad de colores"
+msgid "XawTV isn't installed!"
+msgstr "隆XawTV no est谩 instalado!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Resoluciones"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Crear/Transferir\n"
+"claves de respaldo para SSH"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 billones de colores (32 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "No incluir archivos cr铆ticos (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 millones de colores (24 bits)"
+msgid "old static device name used in dev package"
+msgstr "nombre antiguo de dispositivo est谩tico utilizado en el paquete dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil colores (16 bits)"
+msgid "This label is already used"
+msgstr "Esta etiqueta ya est谩 en uso"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil colores (15 bits)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Bienvenido al Asistente de configuraci贸n de Impresoras\n"
+"\n"
+"Este asistente lo ayudar谩 a instalar sus impresoras conectadas a esta "
+"computadora o conectadas directamente a la red.\n"
+"\n"
+"Si tiene impresoras conectadas a esta m谩quina, por favor enci茅ndalas para "
+"que se puedan detectar autom谩ticamnte. Tambi茅n deber铆an estar conectadas y "
+"encendidas sus impresoras de red.\n"
+"\n"
+"Note que la detecci贸n autom谩tica de las impresoras de red toma m谩s tiempo "
+"que s贸lo la detecci贸n autom谩tica de las impresoras conectadas a esta "
+"m谩quina. Entonces, desactive la detecci贸n autom谩tica de las impresoras de "
+"red si no lo necesita.\n"
+"\n"
+"Haga clic sobre \"Siguiente\" cuando est茅 listo, o sobre \"Cancelar\" si "
+"Usted no desea configurar sus impresoras ahora."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 colores (8 bits)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Se perder谩n todos los datos de la partici贸n %s despu茅s de formatearla"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "驴Es esta la configuraci贸n correcta?"
+msgid "Connection Time: "
+msgstr "Tiempo de conexi贸n: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saliendo en %d segundos"
+msgid "select perm file to see/edit"
+msgstr "seleccionar archivo a ver/editar"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Ocurri贸 un error:\n"
-"%s\n"
-"Intente cambiar algunos par谩metros"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Advertencia: probar esta tarjeta de v铆deo puede colgar su computadora"
+"Por favor, inserte el CD-ROM de la instalaci贸n en su unidad y presione "
+"Aceptar.\n"
+"Si no lo tiene, presione Cancelar para evitar la actualizaci贸n en vivo."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "驴Desea probar la configuraci贸n?"
+msgid "Use group id for execution"
+msgstr "Usar ID del grupo para la ejecuci贸n"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Probar la configuraci贸n"
+msgid "Choose the default user:"
+msgstr "Elija el usuario predeterminado:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "驴Qu茅 norma est谩 utilizando su TV?"
+msgid "Gabon"
+msgstr "Gab贸n"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Parece que su tarjeta gr谩fica tiene un conector de salida para TV.\n"
-"Se puede configurar para trabajar con el frame-buffer.\n"
"\n"
-"Para esto Usted tiene que conectar su tarjeta gr谩fica a su TV antes de "
-"arrancar su computadora.\n"
-"Luego, elija la entrada \"TVout\" en el cargador de arranque\n"
-"\n"
-"驴Tiene Usted esta caracter铆stica?"
+"Aqu铆 no tiene que configurar las impresoras en los servidores CUPS remotos; "
+"las mismas se detectar谩n autom谩ticamente."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Puede configurar su computadora para que inicie X autom谩ticamente\n"
-"al arrancar. 驴Desea que se lance X cuando reinicie?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X al arrancar"
+"Mandrake Linux puede soportar m煤ltiples idiomas. Seleccione\n"
+"los que desea instalar. Los mismos estar谩n disponibles cuando\n"
+"su instalaci贸n est茅 completa y Usted reinicie su sistema."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador XFree86: %s\n"
+msgid "Domain"
+msgstr "Dominio"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Precise el tama帽o de la RAM si es necesario (se encontraron %d MB)"
-#: ../../Xconfig/various.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluci贸n: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente esta\n"
+"etapa est谩 completamente automatizada. DrakX analizar谩 el sector de\n"
+"arranque del disco y actuar谩 en funci贸n de lo que encuentre all铆:\n"
+"\n"
+" * si encuentra un sector de arranque de Windows, lo reemplazar谩 con un\n"
+"sector de arranque de grub/LILO de forma tal que Usted pueda cargar\n"
+"GNU/Linux u otro sistema operativo;\n"
+"\n"
+" * si encuentra un sector de arranque de grub o LILO, lo reemplazar谩 con\n"
+"uno nuevo;\n"
+"\n"
+"Si no puede realizar una determinaci贸n, DrakX le preguntar谩 d贸nde colocar\n"
+"el cargador de arranque."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidad de color: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 del proveedor (opcional)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memoria de la tarjeta gr谩fica: %s KB\n"
+msgid "Boot device"
+msgstr "Dispositivo de arranque"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Tarjeta gr谩fica: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "驴A qu茅 partici贸n desea cambiarle el tama帽o?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical del monitor: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Islas Circundantes Menores de los Estados Unidos"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal del monitor: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Una herramienta para ver sus archivos de registro (logs)"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibuti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del rat贸n: %s\n"
+msgid "detected on port %s"
+msgstr "detectada en el puerto %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de rat贸n: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Distribuci贸n del teclado: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Tarjeta gr谩fica: %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Opciones: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mount point: "
-msgstr "Punto de montaje: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Por favor, marque si est谩 utilizando un dispositivo DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Server: "
-msgstr "Servidor: "
+msgid "Splash selection"
+msgstr "Selecci贸n de Splash"
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "La URL deber铆a empezar con http:// o https://"
+msgid "Extended partition not supported on this platform"
+msgstr "La partici贸n extendida no est谩 disponible en esta plataforma"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Por favor, ingrese la URL del servidor WebDAV"
+msgid "ISDN Configuration"
+msgstr "Configuraci贸n de RDSI"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Punto de montaje"
+msgid "high"
+msgstr "Alta"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Server"
-msgstr "Servidor"
+msgid "Internet Connection Sharing"
+msgstr "Compartir la conexi贸n a Internet"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Mount"
-msgstr "Montar"
+msgid "Choose file"
+msgstr "Elija un archivo"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Desmontar"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"隆Atenci贸n! Se ha detectado la configuraci贸n del cortafuegos existente. Puede "
+"que necesite alg煤n ajuste manual tras la instalaci贸n."
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New"
-msgstr "Nuevo"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Acceso de tarjetas de Impresora/Foto en \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"WebDAV es un protocolo que le permite montar localmente un directorio de un\n"
-"servidor web, y tratarlo como un sistema de archivos local (siempre y "
-"cuando\n"
-"el servidor web est谩 configurado como servidor WebDAV). Si desea a帽adir\n"
-"puntos de montaje WebDAV, seleccione \"Nuevo\"."
+"驴Desea habilitar la impresi贸n en las impresoras mencionadas arriba o en las "
+"impresoras en la red local?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use \"%s\" en su lugar"
+msgid "Printer default settings"
+msgstr "Configuraciones predeterminadas de la impresora"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Type"
-msgstr "Tipo"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Rat贸n gen茅rico PS2 con rueda"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Use \"Desmontar\" primero"
+msgid "Removing old printer \"%s\"..."
+msgstr "Quitando la impresora antigua \"%s\" ..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Delete"
-msgstr "Borrar"
+msgid "Select a device !"
+msgstr "隆Seleccione un dispositivo!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Crear"
+msgid "Remove selected server"
+msgstr "Quitar servidor seleccionado"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipos de sistemas de archivos:"
+msgid "French Southern Territories"
+msgstr "Terrotorios Franceses del Sur"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Empty"
-msgstr "Vac铆o"
+msgid "the vendor name of the processor"
+msgstr "el nombre del fabricante del procesador"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr ""
+"Deber铆a hacer una copia de seguridad de todos los datos de esta partici贸n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Instalando el paquete %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Verificando dispositivo y configurando HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Intercambio"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Por favor, para tener m谩s particiones borre alguna para poder crear una "
+"partici贸n extendida"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "S. de a. con journal"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Su impresora se configur贸 autom谩ticamente para darle acceso a las unidades "
+"de tarjetas de fotos desde su PC. Ahora puede acceder a sus tarjetas de "
+"fotos utilizando el programa gr谩fico \"MtoolsFM\" (Men煤: \"Aplicaciones\" -> "
+"\"Herramientas de Archivo\" -> \"Administrador de archivos MTools\") o los "
+"utilitarios \"mtools\" de l铆nea de comandos (teclee \"man mtools\" para m谩s "
+"informaci贸n). Encontrar谩 el sistema de archivos de la tarjeta bajo la letra "
+"de unidad \"p:\", o letras de unidad subsiguientes cuando tiene m谩s de una "
+"impresora HP con unidades de tarjetas de fotos. En \"MtoolsFM\" puede "
+"cambiar entre las letras de unidad con el campo en la esquina superior "
+"derecha de la lista de archivos."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Elija los paquetes a instalar"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No hard drives found"
-msgstr "隆No se encontraron discos r铆gidos!"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Algunos errores con sendmail son causados por\n"
+" una configuraci贸n mala de postfix. Para resolverlo tiene\n"
+" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Por favor, haga clic sobre una partici贸n"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Se perder谩n TODAS las particiones y sus datos en la unidad %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Tiene una partici贸n Microsoft Windows de gran tama帽o.\n"
-"Le sugiero que primero cambie el tama帽o de la misma\n"
-"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Elija una acci贸n"
+"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Asistente"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
+"qu茅 rellenar los campos Descripci贸n ni Ubicaci贸n. Son comentarios para los "
+"usuarios."
-#: ../../diskdrake/hd_gtk.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
-"suficiente) al principio del disco"
+"\"%s\": al hacer clic sobre el bot贸n \"%s\" se abrir谩 el asistente de\n"
+"configuraci贸n de la impresora. Consulte el cap铆tulo correspondiente de la\n"
+"\"Gu铆a de Comienzo\" para m谩s informaci贸n sobre c贸mo configurar una\n"
+"impresora nueva. La interfaz presentada all铆 es similar a la utilizada\n"
+"durante la instalaci贸n."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Por favor, haga primero una copia de seguridad de sus datos"
+msgid "Bhutan"
+msgstr "But谩n"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Read carefully!"
-msgstr "隆Lea con cuidado!"
+msgid "Network interface"
+msgstr "Interfaz de red"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Clave de cifrado (otra vez)"
+msgid "Reading printer data..."
+msgstr "Leyendo los datos de la impresora ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Clave de cifrado"
+msgid "Korean keyboard"
+msgstr "Coreano"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Las claves de cifrado no coinciden"
+msgid "Not connected"
+msgstr "No conectado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "Greek"
+msgstr "Griego"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Esta clave de cifrado es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
+"Argumentos: (arg)\n"
+"\n"
+"Si \\fIarg\\fP = ALL permitir que existan /etc/issue y /etc/issue.net. Si "
+"\\fIarg\\fP = NONE no se\n"
+"permiten \"issues\", de lo contrario s贸lo se permite /etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Elija la clave de cifrado de su sistema de archivos"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts y Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Clave de cifrado del sistema de archivos"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Transferencia exitosa\n"
+"Puede verificar que se puede conectar al servidor con:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"sin que se le pida una contrase帽a."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tipo: "
+msgid "Enable OF Boot?"
+msgstr "驴Habilitar el arranque de OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "en el canal %d id %d\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "No se puede usar JFS para particiones menores de 32MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de la tabla de particiones: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Frecuencia vertical del monitor: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos-LVM %s\n"
+msgid "path"
+msgstr "ruta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Mount point"
+msgstr "Punto de montaje"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometr铆a: %s cilindros, %s cabezas, %s sectores\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Ocurri贸 un error:\n"
+"%s\n"
+"Intente cambiar algunos par谩metros"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Tama帽o: %s\n"
+msgid "Restore system"
+msgstr "Restaurar archivos del sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Read-only"
-msgstr "S贸lo lectura"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"Estas son las m谩quinas en las cuales deber铆an estar disponibles los "
+"esc谩neres conectados localmente:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Device: "
-msgstr "Dispositivo: "
+msgid "The DHCP end ip"
+msgstr "脷ltima IP del rango de DHCP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta partici贸n especial de Bootstrap\n"
-"es para el arranque\n"
-"dual de su sistema.\n"
+msgid "Another one"
+msgstr "Otro"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup"
+msgstr "Drakbackup"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Colombia"
+msgstr "Colombia"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"Configuraci贸n corriente de `%s':\n"
"\n"
-"Es probable que esta partici贸n sea\n"
-"una partici贸n de Controlador, probablemente\n"
-"deber铆a dejarla como est谩.\n"
+"Red: %s\n"
+"Direcci贸n IP: %s\n"
+"Atributo IP: %s\n"
+"Controlador: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nombre del archivo de loopback: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos-RAID %s\n"
+msgid "Reunion"
+msgstr "Reuni贸n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tama帽o de los bloques %s\n"
+msgid "Details"
+msgstr "Detalles"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Por motivos de seguridad, se desconectar谩 ahora."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partici贸n predeterminada de arranque\n"
-" (para arranque de MS-DOS, no para lilo)\n"
+msgid "Synchronization tool"
+msgstr "Herramienta de sincronizaci贸n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Archivo(s) de loopback:\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "Verificando su sistema..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Imprimir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Montado\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Inserte la cinta con la etiqueta de volumen %s\n"
+" en la unidad de cinta %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "No formateado\n"
+msgid "Mongolia"
+msgstr "Mongolia"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formateado\n"
+msgid "Mounted\n"
+msgstr "Montado\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindros %d a %d\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Interfaz gr谩fica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
+msgid "Restore Users"
+msgstr "Restaurar usuarios"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Tama帽o: %s"
+msgid "Encryption key for %s"
+msgstr "Clave de cifrado para %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Comienzo: sector %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
+"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
+"act煤an\n"
+"como servidores para protocolos que usan el mecanismo RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Nombre: "
+msgid "Detected hardware"
+msgstr "Hardware detectado"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
+msgid "Mauritius"
+msgstr "Mauricio"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partici贸n %s ahora se conoce como %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Birmano)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Borrando %s"
+msgid "Enabling swap partition %s"
+msgstr "Habilitando la partici贸n swap %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"No hay particiones FAT para usar como loopback (o no queda espacio "
+"suficiente)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Moviendo los archivos a la nueva partici贸n"
+msgid "Armenian (old)"
+msgstr "Armenio (antiguo)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"El directorio %s ya tiene algunos datos\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Ocultar archivos"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Mover los archivos a la nueva partici贸n"
+"Ya existe una impresora denominada \"%s\" bajo %s. \n"
+"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
+"Tambi茅n puede ingresar un nombre nuevo o saltear esta impresora."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Se perder谩n todos los datos de la partici贸n %s despu茅s de formatearla"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
+"Encuentre las soluciones a sus problemas por medio de la plataforma de "
+"soporte en l铆nea de MandrakeSoft"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Necesita reiniciar el equipo para que la modificaci贸n tenga efecto"
+msgid ", host \"%s\", port %s"
+msgstr ", host \"%s\", puerto %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "隆Se escribir谩 al disco la tabla de particiones de la unidad %s!"
+msgid "Monaco"
+msgstr "M贸naco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Se necesita el paquete %s. 驴Desea instalarlo?"
+msgid "%s formatting of %s failed"
+msgstr "%s formateo de %s fall贸"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "驴Qu茅 tipo de particionamiento?"
+msgid "Partitioning failed: %s"
+msgstr "Fall贸 el particionamiento: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Cuidado: esta operaci贸n es peligrosa."
+msgid "Canada (cable)"
+msgstr "Canad谩 (cable)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "chunk size"
-msgstr "tama帽o de los bloques"
+msgid "Upgrade"
+msgstr "Actualizaci贸n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "nivel"
+msgid "Workstation"
+msgstr "Estaci贸n de trabajo"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "dispositivo"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Instalando el paquete %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Varios"
+msgid "Kyrgyzstan"
+msgstr "Kirguizist谩n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount options"
-msgstr "Opciones de montaje"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Con documentaci贸n b谩sica (隆recomendado!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "El archivo ya existe. 驴Desea usarlo?"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, un planificador de comandos peri贸dicos."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "El archivo ya lo utiliza otro dispositivo loopback, seleccione otro"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Debe tener una partici贸n ra铆z.\n"
+"Para ello, cree una partici贸n (o haga clic sobre una que ya existe).\n"
+"Luego elija la acci贸n \"Punto de montaje\" y def铆nalo como '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Indique el nombre de un archivo"
+msgid "Proxy should be http://..."
+msgstr "El nombre del proxy debe ser http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tipo de sistema de. archivos: "
+msgid "South Africa"
+msgstr "Sud谩frica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Tama帽o en MB: "
+msgid "Western Sahara"
+msgstr "Sahara Oeste"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Nombre del archivo de loopback: "
+msgid "Etherboot Floppy/ISO"
+msgstr "Disquete/ISO Etherboot"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "Modificar configuraci贸n de la impresora"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Esta partici贸n no puede usarse para el loopback"
+msgid "Choose a partition"
+msgstr "Elija una partici贸n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "驴nombre de LVM?"
+msgid "Edit current rule"
+msgstr "Editar regla corriente"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "nuevo"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Elegir un LVM existente al que a帽adir"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/deshabilitar registro de paquetes IPv4 extra帽os."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Elegir un RAID existente al que a帽adir"
+msgid "Please test the mouse"
+msgstr "Pruebe su rat贸n, por favor."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Desplazando una partici贸n..."
+msgid "Other Media"
+msgstr "Otros soportes"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Desplazando"
+msgid "Backup system files"
+msgstr "Respaldar archivos del sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "驴A qu茅 sector desea desplazarla?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "驴A qu茅 disco desea desplazarla?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Desplazar"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Tama帽o nuevo en MB: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"No puede seleccionar este paquete porque no hay espacio suficiente para "
+"instalarlo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose the new size"
-msgstr "Eligiendo el tama帽o nuevo"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Generar un disquete de instalaci贸n autom谩tica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Redimensionar"
+msgid "Dialing mode"
+msgstr "Modo de marcaci贸n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Se perder谩n todos los datos de la partici贸n %s tras cambiar su tama帽o"
+msgid "File sharing"
+msgstr "Compartir archivos"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Deber铆a hacer una copia de seguridad de todos los datos de esta partici贸n"
+msgid "Clean /tmp at each boot"
+msgstr "Limpiar /tmp en cada inicio del equipo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Esta partici贸n no es redimensionable"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando los l铆mites del sistema de archivos FAT"
+msgid "Please choose your type of mouse."
+msgstr "Por favor, seleccione el tipo de su rat贸n."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "驴D贸nde desea montar a %s?"
+msgid "class of hardware device"
+msgstr "clase de dispositivo de hardware"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"No se puede deseleccionar el punto de montaje ya que esta partici贸n\n"
-"se usa para un montaje en loopback.\n"
-"Quite el montaje de loopback primero"
+"Estas son las m谩quinas y redes en las cuales deber铆a(n) estar disponible(s) "
+"la(s) impresora(s) conectada(s) localmente:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "驴D贸nde desea montar el dispositivo %s?"
+msgid "United Kingdom"
+msgstr "Reino Unido"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "驴D贸nde desea montar el archivo de loopback %s?"
+msgid "running"
+msgstr "corriendo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Cambiando de ext2 a ext3"
+msgid "default"
+msgstr "predeterminado"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "驴Qu茅 sistema de archivos desea?"
+msgid "Indonesia"
+msgstr "Indonesia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Cambiar el tipo de partici贸n"
+msgid "France [SECAM]"
+msgstr "Francia [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "restringir"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "necesario"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Se perder谩n todos los datos de la partici贸n %s despu茅s de cambiar su tipo"
+"CUPS no soporta impresoras en servidores Novell o impresoras que env铆an los "
+"datos en un comando formado libremente.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "驴Borrar el archivo de loopback?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "L铆nea de comandos"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"No puede crear una partici贸n nueva\n"
-"(debido a que alcanz贸 la cantidad m谩xima de particiones primarias).\n"
-"Primero debe quitar una partici贸n primaria y crear una partici贸n extendida."
+"Nuestro rango completo de soluciones Linux, as铆 como tambi茅n ofertas "
+"especiales sobre productos y otras \"cositas\", est谩n disponibles en l铆nea "
+"en nuestra tienda electr贸nica:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Preferencia: "
+msgid "access to administrative files"
+msgstr "acceso a archivos administrativos"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector de comienzo: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Error enviando correo con sendmail.\n"
+" Su correo-e de reporte no se envi贸.\n"
+" Por favor, configure a sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Crear una partici贸n nueva"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", dispositivo multifunci贸n en puerto paralelo \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Usar para loopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumentos: (val)\n"
+"\n"
+"Ajustar el timeout del shell. Un valor de cero significa sin timeout."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modificar el RAID"
+msgid "Montserrat"
+msgstr "Monserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Quitar del LVM"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Quitar del RAID"
+msgid "Swap"
+msgstr "Intercambio"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "A帽adir al LVM"
+msgid "Connecting to the Internet "
+msgstr "Conectando a la Internet "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "A帽adir al RAID"
+msgid "Restore Other"
+msgstr "Restaurar otros"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatear"
+msgid "TV card"
+msgstr "Tarjeta de TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Informaci贸n detallada"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Tratando de rescatar la tabla de particiones"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Inserte un disquete en la unidad\n"
-"Se perder谩n todos los datos del disquete"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Advertencia"
+"Argumentos: (umask)\n"
+"\n"
+"Configurar la umask de root."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Elija un archivo"
+msgid "Remove selected host/network"
+msgstr "Quitar host/red seleccionada."
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"La tabla de particiones de respaldo no tiene\n"
-"el mismo tama帽o. 驴Desea continuar de todas formas?"
+"Postfix es un agente de transporte de correo (MTA), es decir el programa "
+"encargado de enviar el correo electr贸nico de una m谩quina a otra."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Montaje autom谩tico de dispositivos extra铆bles"
+msgid "Disconnection from the Internet failed."
+msgstr "Fall贸 la desconexi贸n desde la Internet."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Volver a cargar la tabla de particiones"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Aqu铆 puede elegir la tecla o combinaci贸n de teclas que permitir谩\n"
+"cambiar entre los diferentes esquemas de teclado\n"
+"(ej.: latino y no latino)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Rescatar la tabla de particiones"
+msgid "Network Hotplugging"
+msgstr "\"Enchufe en caliente\" de la red"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Restaurar la tabla de particiones"
+msgid "if set to yes, reports check result to tty."
+msgstr "si se pone en s铆, reportar resultados de verificaci贸n en tty."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Guardar la tabla de particiones"
+msgid "Restore From CD"
+msgstr "Restaurar desde CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Por favor, para tener m谩s particiones borre alguna para poder crear una "
-"partici贸n extendida"
+"Est谩 a punto de configurar su computadora para compartir la conexi贸n a "
+"Internet.\n"
+"Con esta caracter铆stica, otras computadoras de su red local podr谩n usar la "
+"conexi贸n a Internet de esta computadora.\n"
+"\n"
+"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
+"drakconnect antes de proceder.\n"
+"\n"
+"Nota: necesita un adaptador de red dedicado para configurar una red de 谩rea "
+"local (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "No se pueden agregar m谩s particiones"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Por favor, elija el adaptador de red que desea usar para conectarse a "
+"Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Todas las particiones primarias est谩n usadas"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
+"Acceso a la tarjeta de memoria de fotos en su dispositivo multifunci贸n HP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informaci贸n del disco r铆gido"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Mejore el rendimiento de su computadora con la ayuda de una selecci贸n de "
+"socios que ofrecen soluciones profesionales compatibles con Mandrake Linux"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Asignaci贸n autom谩tica"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Ahora, la conexi贸n compartida a Internet est谩 inactiva."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Borrar todas"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "si se pone en s铆, verificar suma de los archivos suid/sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "驴Desea guardar las modificaciones en /etc/fstab?"
+msgid "Latin American"
+msgstr "Latinoamericano"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "驴Salir del programa sin grabar la tabla de particiones?"
+msgid "Japanese text printing mode"
+msgstr "Modo de impresi贸n de texto japon茅s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Salir sin grabar"
+msgid "Old device file"
+msgstr "Archivo de dispositivo antiguo"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "驴Seguir adelante?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Cambiar al modo experto"
+msgid "Button `%s': %s"
+msgstr "Bot贸n `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Cambiar al modo normal"
+msgid "Please wait"
+msgstr "Espere, por favor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Deshacer"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Salir"
+msgid "None"
+msgstr "Ninguno"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Elija una partici贸n"
+msgid "The entered IP is not correct.\n"
+msgstr "La IP ingresada no es correcta.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Elija otra partici贸n"
+msgid "Ethernet Card"
+msgstr "Tarjeta ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Cambiar tipo"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Buscar servidores"
+msgid "Install"
+msgstr "Instalar"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Dominio"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Haga clic sobre \"%s\" si desea borrar todos los datos y particiones\n"
+"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
+"\"%s\", no podr谩 recuperar los datos y las particiones presentes en esta\n"
+"unidad de disco, incluyendo los datos de Windows.\n"
+"\n"
+"Haga clic sobre \"%s\" para detener esta operaci贸n sin perder los datos ni\n"
+"las particiones presentes en esta unidad de disco."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Nombre de usuario"
+msgid "Exit install"
+msgstr "Salir de la instalaci贸n"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Por favor, ingrese su nombre de usuario, contrase帽a y nombre de dominio para "
-"acceder a este host."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Se necesita autenticaci贸n de dominio"
+"Se ha configurado todo.\n"
+"Ahora puede compartir su conexi贸n a Internet con otros ordenadores de su red "
+"de 谩rea local, usando la configuraci贸n autom谩tica de la red (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Another one"
-msgstr "Otro"
+msgid "Remote CUPS server"
+msgstr "Servidor CUPS remoto"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which username"
-msgstr "Qu茅 nombre de usuario"
+msgid "Sun - Mouse"
+msgstr "Rat贸n Sun"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"No se puede conectar utilizando el nombre de usuario %s (驴contrase帽a "
-"incorrecta?)"
+"S贸lo hay un adaptador de red configurado en su sistema:\n"
+"\n"
+"%s\n"
+"\n"
+"Se va a configurar su red de 谩rea local con ese adaptador."
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu #"
+msgid "Minimal install"
+msgstr "Instalaci贸n m铆nima"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "Controladores SMBus"
+msgid "Ethiopia"
+msgstr "Etiop铆a"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "Controladores USB"
+msgid "Devanagari"
+msgstr "Indio (Devanagari)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SCSI controllers"
-msgstr "Controladores SCSI"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- dispositivos PCI: el z贸calo PCI, dispositivo y funci贸n de esta tarjeta\n"
+"- dispositivos EIDE: el dispositivo es o bien uno maestro o uno esclavo\n"
+"- dispositivos SCSI: el bus SCSI y los id de dispositivo SCSI"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Controladores Firewire"
+msgid "Total size: %d / %d MB"
+msgstr "Tama帽o total: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Controladores (E)IDE/ATA"
+msgid "disabled"
+msgstr "deshabilitado"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Search for new scanners"
+msgstr "Buscar esc谩neres nuevos"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Scanner"
-msgstr "Esc谩ner."
+msgid "Disabling servers..."
+msgstr "Desactivando los servidores..."
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Desconocido/Otros"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Por favor, elija el intervalo de\n"
+" tiempo entre cada copia de respaldo"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Puentes y controladores del sistema"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Fall贸 la instalaci贸n de %s. Ocurri贸 el siguiente error:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Modem"
-msgstr "M贸dem"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "No se puede ejecutar mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Tarjeta Ethernet"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Ha seleccionado el/los siguientes servidores: %s\n"
+"\n"
+"\n"
+"Estos servidores se activan por defecto. No se les conocen problemas de\n"
+"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, debe "
+"asegurarse de\n"
+"actualizarlos tan pronto como sea posible.\n"
+"\n"
+"\n"
+"驴Realmente desea instalar estos servidores?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Processors"
-msgstr "Procesadores"
+msgid "Network printer (TCP/Socket)"
+msgstr "Impresora de red (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Webcam"
-msgstr "C谩mara web"
+msgid "Backup User files..."
+msgstr "Respaldar archivos de usuario..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "Tarjeta de sonido"
+msgid "Install system"
+msgstr "Instalar el sistema"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Otros dispositivos multimedios"
+msgid "First DNS Server (optional)"
+msgstr "Primer servidor DNS (opcional)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tvcard"
-msgstr "Tarjeta de TV"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Alternativamente, puede especificar el nombre de un dispositivo o archivo en "
+"la l铆nea de entrada"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Videocard"
-msgstr "Tarjeta de v铆deo"
+msgid "dhcpd Config..."
+msgstr "Configuraci贸n de dhcpd..."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Tape"
-msgstr "Cinta"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "La configuraci贸n ya se ha hecho, pero ahora est谩 desactivada."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "LILO/grub Installation"
+msgstr "Instalaci贸n de LILO/grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "Grabadoras de CD/DVD"
+msgid "Israeli"
+msgstr "Israel铆"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CDROM"
-msgstr "CD-ROM"
+msgid "load setting"
+msgstr "configuraci贸n de la carga"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disk"
-msgstr "Disco"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Impresora \"%s\" en el servidor \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Floppy can be removed now"
+msgstr "Ya se puede quitar el disquete"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Instalaci贸n m铆nima"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Disquete"
+msgid "Denmark"
+msgstr "Dinamarca"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Permitirme elegir cualquier controlador"
+msgid "Moving partition..."
+msgstr "Desplazando una partici贸n..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Controlador:"
+msgid "(This) DHCP Server IP"
+msgstr "IP de (este) servidor DHCP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Si realmente cree que sabe qu茅 controlador es el adecuado para su tarjeta\n"
-"puede elegir uno en la lista de arriba.\n"
-"\n"
-"El controlador corriente para su tarjeta de sonido \"%s\" es \"%s\" "
+msgid "Test of the configuration"
+msgstr "Probar la configuraci贸n"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Eligiendo un controlador arbitrario"
+msgid "Installing %s ..."
+msgstr "Instalando %s ..."
-#: ../../harddrake/sound.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"El probador de sonido cl谩sico va a ejecutar los comandos siguientes:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" le dir谩 qu茅 controlador predet. usa su\n"
-"tarjeta de sonido\n"
+"Si le dijo al instalador que deseaba seleccionar los paquetes individuales,\n"
+"el mismo presentar谩 un 谩rbol que contiene todos los paquetes clasificados\n"
+"por grupos y subgrupos. Mientras navega por el 谩rbol puede seleccionar\n"
+"grupos enteros, subgrupos, o paquetes individuales.\n"
"\n"
-"- \"grep sound-slot /etc/modules.conf\n"
-"\" le dir谩 qu茅 controlador usa la misma\n"
-"en este momento\n"
+"Tan pronto como selecciona un paquete en el 谩rbol, aparece una descripci贸n\n"
+"del mismo sobre la derecha que le permite conocer el prop贸sito del paquete.\n"
"\n"
-"- \"/sbin/lsmod\" le permitir谩 verificar si su m贸dulo (controlador) est谩\n"
-"cargado o no\n"
+"Es muy probable que la gran mayor铆a de las descripciones de los paquetes\n"
+"est茅n en ingl茅s.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" y \"/sbin/chkconfig --list alsa\" le "
-"dir谩\n"
-"si los servicios alsa y sonido est谩n configurados para correr en el nivel\n"
-"de ejecuci贸n 3\n"
+"!! Si ha sido seleccionado un paquete de servidor ya sea porque Usted\n"
+"seleccion贸 espec铆ficamente el paquete individual o porque el mismo era\n"
+"parte de un grupo de paquetes, se le pedir谩 que confirme que realmente\n"
+"desea que se instalen esos servidores. Bajo Mandrake Linux, cualquier\n"
+"servidor instalado se inicia de manera predeterminada al momento del\n"
+"arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
+"momento en que se public贸 la distribuci贸n, es posible que se descubran\n"
+"vulnerabilidades en la seguridad luego que se termin贸 con esta versi贸n de\n"
+"Mandrake Linux. En particular, si no sabe que es lo que se supone que hace\n"
+"un servicio o la raz贸n por la cual se est谩 instalando, entonces haga clic\n"
+"sobre \"%s\". Si hace clic sobre \"%s\" se instalar谩n todos los servicios\n"
+"listados y de manera predeterminada los mismos arrancar谩n autom谩ticamente.\n"
+"!!\n"
"\n"
-"- \"aumix -q\" le dir谩 si el volumen del sonido est谩 mudo o no\n"
+"La opci贸n \"%s\" simplemente deshabilita el di谩logo de advertencia que\n"
+"aparece cuando el instalador selecciona autom谩ticamente un paquete para\n"
+"resolver un problema de dependencias. Algunos paquetes tienen relaciones\n"
+"entre ellos tales que la instalaci贸n de un paquete necesita que alg煤n otro\n"
+"programa ya est茅 instalado. El instalador puede determinar qu茅 paquetes se\n"
+"necesitan para satisfacer una dependencia para completar la instalaci贸n de\n"
+"manera satisfactoria.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" le dir谩 qu茅 programa utiliza la tarjeta de "
-"sonido.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Soluci贸n de problemas de sonido"
+"El peque帽o icono del disquete al final de la lista le permite cargar la\n"
+"lista de paquetes elegida durante una instalaci贸n previa. Esto es 煤til si\n"
+"Usted tiene una cantidad de m谩quinas que desea configurar de manera\n"
+"id茅ntica. Haga clic sobre este icono y se le pedir谩 que inserte un disquete\n"
+"creado con anterioridad al final de otra instalaci贸n. Vea el segundo\n"
+"consejo del 煤ltimo paso para informaci贸n sobre como crear dicho disquete."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Error: el controlador \"%s\" para su tarjeta de sonido no est谩 listado"
+msgid "Choose your filesystem encryption key"
+msgstr "Elija la clave de cifrado de su sistema de archivos"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Controlador desconocido"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Por favor, elija su dispositivo CD/DVD\n"
+"(Presione Intro para propagar las configuraciones a otros campos.\n"
+"Este campo no es necesario, s贸lo una herramienta para completar el "
+"formulario.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "No hay un controlador conocido para su tarjeta de sonido (%s)"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "No hay controlador conocido"
+msgid "Sierra Leone"
+msgstr "Sierra Leona"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"No hay controlador libre para su tarjeta de sonido (%s), pero hay uno "
-"propietario en \"%s\"."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "No hay controlador open source"
+msgid "(default value: %s)"
+msgstr " (valor predeterminado: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Espere, por favor... Aplicando la configuraci贸n"
+msgid "Alternative test page (Letter)"
+msgstr "P谩gina de prueba alternativa (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"El controlador antiguo \"%s\" est谩 en la lista negra.\n"
+"Configuraci贸n del servidor DHCP.\n"
"\n"
-"Ha sido reportado como problem谩tico para el n煤cleo al descargarlo.\n"
+"Aqu铆 puede seleccionar opciones diferentes para la configuraci贸n del "
+"servidor DHCP.\n"
+"Si no conoce el significado de una opci贸n, simlpemente d茅jela como est谩.\n"
"\n"
-"El controlador nuevo \"%s\" s贸lo se utilizar谩 en el pr贸ximo arranque."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Soluci贸n de problemas"
+msgid "Choose an X server"
+msgstr "Seleccione un servidor X"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Tama帽o de la partici贸n de intercambio en MB: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) fue el primer API de sonido. Es un API de sonido "
-"independiente del sistema operativo (est谩 disponible en la mayor铆a de los "
-"sistemas Unix) pero es un API muy b谩sico y limitado.\n"
-"Es m谩s, todos los controladores OSS reinventan la rueda.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) es una arquitectura modular que\n"
-"soporta un amplio rango de tarjetas ISA, USB y PCI.\n"
-"\n"
-"Tambi茅n brinda un API de m谩s alto nivel que OSS.\n"
-"\n"
-"Para utilizar ALSA, uno puede utilizar:\n"
-"- el API antiguo de compatibilidad OSS\n"
-"- el API nuevo de ALSA que brinda muchas caracter铆sticas mejoradas pero "
-"necesita del uso de la bilbioteca ALSA.\n"
+"Otro (no drakbackup)\n"
+"las claves ya est谩n en su lugar"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "隆No hay cambios para realizar respaldo!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formateado\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Tipo de instalaci贸n."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Impresora \"%s\" en el servidor SMB/Windows \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Actualmente su tarjeta usa el controlador %s\"%s\" (el controlador predet. "
-"para su tarjeta es \"%s\")"
+"- Servidor (%s) incluye :\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d n煤meros separados por comas"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Aqu铆 puede seleccionar un controlador alternativo (OSS o ALSA) para su "
-"tarjeta de sonido (%s)"
+"El protocolo rusers permite que los usuarios de una red identifiquen\n"
+"quien est谩 conectado en otras m谩quinas que respondan."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Configuraci贸n de sonido"
+msgid "Automatic Steps Configuration"
+msgstr "Configuraci贸n de pasos autom谩ticos"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"No hay contrlador alternativo OSS/ALSA conocido para su tarjeta de sonido (%"
-"s) que en este momento usa \"%s\""
+"驴Desea saber m谩s acerca de la comunidad de C贸digo Abierto? Participe en el "
+"mundo del Software Libre!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "No hay controlador alternativo"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "habilitar el soporte para radio"
+msgid "Please select data to backup..."
+msgstr "Por favor, elija los datos a respaldar..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Soporte para radio :"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"Fall贸 la conexi贸n.\n"
+"Verifique su configuraci贸n en el Centro de Control de Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "Configuraci贸n del PLL :"
+msgid "received"
+msgstr "recibido"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Cantidad de b煤feres de captura para la captura con mmap"
+msgid "/File/_New"
+msgstr "/Archivo/_Nuevo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Cantidad de b煤feres de captura :"
+msgid "The DNS Server IP"
+msgstr "La IP del servidor DNS"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tipo de sintonizador :"
+msgid "IP Range End:"
+msgstr "Fin de rango IP:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Modelo de la tarjeta :"
+msgid "High"
+msgstr "Alta"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"El m贸dulo bttv del n煤cleo GNU/Linux simplemente detecta autom谩ticamente los "
-"par谩metros correctos para la mayor铆a de las tarjetas de TV modernas.\n"
-"Si no se detecta correctamente la suya, aqu铆 puede forzar los tipos de "
-"tarjeta y sintonizador adecuados. Simplemente seleccione los par谩metros de "
-"su tarjeta de TV si lo necesita."
+msgid "NoVideo"
+msgstr "Sin v铆deo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Este campo describe al dispositivo"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Desconocido|Gen茅rico"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Agregando impresora a Star Office/OpenOffice.org/GIMP"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Desconocido|CPH06X (bt878) [muchos fabricantes]"
+msgid "Local Printers"
+msgstr "Impresoras locales"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Desconocido|CPH05X (bt878) [muchos fabricantes]"
+msgid "Installation image directory"
+msgstr "Directorio de imagen de instalaci贸n"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Detecci贸n autom谩tica"
+msgid "NIS Server"
+msgstr "Servidor NIS"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Hacer"
+msgid "Port: %s"
+msgstr "Puerto: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "驴Su elecci贸n? (por defecto %s)"
+msgid "Spain"
+msgstr "Espa帽a"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Elecci贸n incorrecta, int茅ntelo de nuevo\n"
+msgid "This user name has already been added"
+msgstr "Este nombre de usuario ya fue a帽adido"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Reenviar"
+msgid "Choose a file"
+msgstr "Elija un archivo"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Aviso, una etiqueta cambi贸:\n"
-"%s"
+msgid "Apply"
+msgstr "Aplicar"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Por favor, seleccione el primer n煤mero del rango de 10 que desee\n"
-"editar, o pulse Intro para continuar.\n"
-"驴Su elecci贸n?"
+msgid "Auto-detect available ports"
+msgstr "/Autodetectar puertos disponibles"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Ahora, la conexi贸n compartida a Internet est谩 desactivada"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "驴Su elecci贸n? (por defecto %s'%s) "
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "ingrese `void' para una entrada vac铆a"
+msgid "Belgium"
+msgstr "B茅lgica"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "驴Desea pulsar este bot贸n?"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Bot贸n `%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "Elija el gestor de ventanas a ejecutar:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Sub-generaci贸n de la CPU"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "驴Su elecci贸n? (0/1, por defecto '%s') "
+msgid "First Time Wizard"
+msgstr "Aisstente Inicial"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Entradas que tendr谩 que rellenar:\n"
-"%s"
+"Ocurri贸 un error y no se puede gestionar de forma adecuada.\n"
+"Contin煤e bajo su propio riesgo."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Error al cargar el m贸dulo %s.\n"
-"驴Desea intentarlo de nuevo con otros par谩metros?"
+msgid "please wait, parsing file: %s"
+msgstr "por favor, espere, analizando el archivo: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Especificar las opciones"
+msgid "Taiwan"
+msgstr "Taiw谩n"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Autodetecci贸n"
+msgid "Pakistan"
+msgstr "Pakist谩n"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"En algunos casos, el controlador de %s necesita informaci贸n extra\n"
-"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
-"驴Desea especificar informaci贸n extra para el controlador o dejar que el "
-"mismo\n"
-"pruebe su equipo y encuentre la informaci贸n que necesita? A veces,\n"
-"el probar el equipo puede provocar que 茅ste se cuelgue, pero no deber铆a\n"
-"causar ning煤n da帽o."
+"Para poder imprimir con su impresora de inyecci贸n de tinta Lexmark y esta "
+"configuraci贸n, necesita los controladores de impresoras de inyecci贸n de "
+"tinta proporcionados por Lexmark (http://www.lexmark.com/). Haga clic en el "
+"v铆nculo \"Drivers\". Luego, seleccione su modelo y posteriormente \"Linux\" "
+"como sistema operativo. Los controladores vienen vienen como paquetes RPM o "
+"como scripts del shell con instalaci贸n gr谩fica interactiva. No necesita "
+"hacer esta configuraci贸n con las interfaces gr谩ficas. Cancele directamente "
+"tras el acuerdo de licencia. Luego imprima las p谩ginas de alineaci贸n del "
+"cabezal de impresi贸n con \"lexmarkmaintain\" y ajuste la configuraci贸n de la "
+"alineaci贸n de la cabeza con este programa."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "驴Qu茅 controlador de %s debo probar?"
+msgid "Permissions"
+msgstr "Permisos"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Opciones de los m贸dulos:"
+msgid "Provider name (ex provider.net)"
+msgstr "Nombre del proveedor (ej proveedor.net)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aqu铆 deben ir las diferentes opciones para el m贸dulo %s.\n"
-"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
-"Por ejemplo, \"io=0x300 irq=7\""
+msgid "Version: %s\n"
+msgstr "Versi贸n: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Ahora puede proporcionar las opciones al m贸dulo %s.\n"
-"Note que cualquier direcci贸n debe ingresarse con el prefijo 0x, ej.: '0x123'"
+"Su sistema tiene pocos recursos. Puede tener alg煤n problema instalando\n"
+"Mandrake Linux. Si eso ocurre, puede intentar una instalaci贸n tipo texto.\n"
+"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(m贸dulo %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Usar la partici贸n de Windows para loopback"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando controlador para la tarjeta %s %s"
+msgid "Armenian (typewriter)"
+msgstr "Armenio (nuevo)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Ver informaci贸n sobre el hardware"
+msgid "Connection type: "
+msgstr "Tipo de conexi贸n: "
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "驴Tiene alguna interfaz %s?"
+msgid "Graphical interface"
+msgstr "Interfaz gr谩fica"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "驴Tiene alguna otra?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s con aceleraci贸n 3D por hardware"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s encontradas"
+msgid "India"
+msgstr "India"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Aqu铆 puede configurar cada par谩metro del m贸dulo."
+msgid "Chad"
+msgstr "Chad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "cadenas de caracteres separadas por comas"
+msgid "Slovakia"
+msgstr "Eslovaquia"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "n煤meros separados por comas"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d cadenas de caracteres separadas por comas"
+msgid "Cambodia"
+msgstr "Camboya"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d n煤meros separados por comas"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Frecuencia horizontal del monitor: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "un n煤mero"
+msgid "Path"
+msgstr "Ruta"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Necesita el microc贸digo Alcatel.\n"
-"Desc谩rguelo en\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"y copie mgmt.o en /usr/share/speedtouch"
+"Aqu铆 puede especificar una l铆nea de comandos arbitraria en la cual deber铆a "
+"ponerse el trabajo de impresi贸n en vez de enviarse directamente a la "
+"impresora."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"La forma m谩s com煤n de conexi贸n ADSL es con pppoe.\n"
-"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
-"Si no lo sabe con seguridad, elija 'usar pppoe'"
+"El sistema de impresi贸n (%s) no se iniciar谩 autom谩ticamente cuando arranque "
+"la m谩quina.\n"
+"\n"
+"Es posible que el inicio autom谩tico se desactiv贸 al cambiar a un nivel de "
+"seguridad mayor, porque el sistema de impresi贸n es un potencial punto de "
+"ataques.\n"
+"\n"
+"驴Desea volver a activar el inicio autom谩tico de la impresi贸n cuando el "
+"sistema se vuelva a encender?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Conectar a Internet"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Impresora %s\n"
+"驴Qu茅 desea modificar de esta impresora?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (usando pppoa) usb"
+msgid "Add host"
+msgstr "A帽adir host"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Si realmente cree que sabe qu茅 controlador es el adecuado para su tarjeta\n"
+"puede elegir uno en la lista de arriba.\n"
+"\n"
+"El controlador corriente para su tarjeta de sonido \"%s\" es \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "usar dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"驴Desea permitir a los usuarios exportar algunos directorios personales?\n"
+"Si lo hace, los usuarios podr谩n simplemente hacer clic sobre \"Compartir\" "
+"en Konqueror y Nautilus.\n"
+"\n"
+"\"Personalizar\" permite una granularidad por usuario.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "usar pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Por favor, seleccione cargar o guardar la selecci贸n de paquetes en "
+"disquete.\n"
+"El formato es el mismo que los disquetes generados para la instalaci贸n "
+"autom谩tica."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "usar pppoe"
+msgid "China (broadcast)"
+msgstr "China (difusi贸n)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Otros puertos"
+msgid "Use quota for backup files."
+msgstr "Usar cuota para archivos de respaldo"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Todo (sin cortafuegos)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Configurando la impresora \"%s\" ..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Puerto no v谩lido: %s.\n"
-"El formato adecuado es \"puerto/tcp\" o \"puerto/udp\", \n"
-"donde puerto es un n煤mero entre 1 y 65535."
+msgid "Internet connection"
+msgstr "Conexi贸n a Internet"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Puede ingresar otros puertos. \n"
-"Por ejemplo: 139/tcp 139/udp.\n"
-"Consulte /etc/services para m谩s informaci贸n."
+"Error al cargar el m贸dulo %s.\n"
+"驴Desea intentarlo de nuevo con otros par谩metros?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "驴A qu茅 servicios desear铆a permitir conectarse desde la Internet?"
+msgid "Welcome to the Open Source world."
+msgstr "Bienvenido al mundo del C贸digo Abierto"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Configuraci贸n de drakfirewall\n"
-"\n"
-"Debe asegurarse que ha configurado su acceso de Red/Internet con\n"
-"drakconnect antes de continuar."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia Herzegovina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"configurador de drakfirewall\n"
-"\n"
-"Esto configura un cortafuegos personal para esta m谩quina Mandrake Linux.\n"
-"Para una soluci贸n potente de cortafuegos dedicada, por favor eche un "
-"vistazo\n"
-"a la distribuci贸n especializada MandrakeSecurity Firewall."
+"Necesita un sistema de archivos verdadero (ext2/ext3, reiserfs, xfs o jfs) "
+"para este punto de montaje\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Sin tarjeta de red"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Debe ingresar el nombre o la IP del host.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Servidor POP e IMAP"
+msgid "Netherlands"
+msgstr "Holanda"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Enviando archivos..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Servidor de correo"
+msgid "Internal ISDN card"
+msgstr "Tarjeta RDSI interna"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Servidor de nombres de dominio"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"No hay contrlador alternativo OSS/ALSA conocido para su tarjeta de sonido (%"
+"s) que en este momento usa \"%s\""
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Servidor web"
+msgid "Title"
+msgstr "T铆tulo"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "El nombre de la m谩quina Zeroconf no debe contener un ."
+msgid "Install & convert Fonts"
+msgstr "Instalar y convertir tipograf铆as"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Nombre de la m谩quina"
+msgid "WARNING"
+msgstr "ATENCI脫N"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Nombre de la m谩quina Zeroconf"
+msgid "Installing bootloader"
+msgstr "Instalando cargador de arranque"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Ingrese un nombre de la m谩quina Zeroconf sin puntos si no desea\n"
-"utilizar el nombre predeterminado."
+msgid "replay"
+msgstr "reproducir"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Configurando la red"
+msgid "detected %s"
+msgstr "detectada %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Por favor, elija el adaptador de red que desea usar para conectarse a "
-"Internet"
+msgid "Virgin Islands (U.S.)"
+msgstr "Islas V铆rgenes (EE.UU.)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Elija la interfaz de red"
+msgid "Bad backup file"
+msgstr "Archivo de respaldo incorrecto"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"No se ha detectado ning煤n adaptador de red ethernet en su sistema.\n"
-"No se puede configurar este tipo de conexi贸n."
+"Ya se ha realizado la configuraci贸n de la conexi贸n compartida a la "
+"Internet.\n"
+"En este momento est谩 deshabilitada.\n"
+"\n"
+"驴Qu茅 desea hacer?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"驴Qu茅 cliente dhcp desea utilizar?\n"
-"dhcp-client es el predeterminado"
+"Ingrese la direcci贸n IP y el puerto del host cuyas impresoras desea utilizar."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No se encontr贸 tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
-"siguiente."
+msgid "Pipe into command"
+msgstr "Enviar el trabajo a un comando"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
-"seleccione una tarjeta PCI en la pantalla siguiente."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "驴Cu谩l de las siguientes es su tarjeta RDSI?"
+"Alg煤n hardware de su computadora necesita controladores \"propietarios\" "
+"para funcionar.\n"
+"Puede encontrar informaci贸n sobre ellos en: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Configuraci贸n de RDSI"
+msgid "Detecting devices..."
+msgstr "Detectando los dispositivos..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Abortar"
+msgid "Click here to launch the wizard ->"
+msgstr "Haga clic aqu铆 para lanzar el asistente ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Continuar"
+msgid "Haiti"
+msgstr "Hait铆"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Descripci贸n de los campos:\n"
"\n"
-"Si tiene una tarjeta ISA, los valores de la pr贸xima pantalla deber铆an ser "
-"correctos.\n"
-"\n"
-"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "No lo s茅"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "el nombre de la CPU"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Refrescando datos de impresora ..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "驴Qu茅 tipo de tarjeta tiene?"
+msgid "You must also format %s"
+msgstr "T煤 tambi茅n debes formatear %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Se encontr贸 la interfaz \"%s\", 驴desea utilizarla?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Cuidado: esta operaci贸n es peligrosa."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "驴Qu茅 protocolo desea utilizar?"
+msgid "Insert a floppy containing package selection"
+msgstr "Introduzca un disquete que contenga la selecci贸n de paquetes"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocolo para el resto del mundo"
+msgid "Server: "
+msgstr "Servidor: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocolo para el resto del mundo \n"
-" sin canal D (l铆neas alquiladas)"
+msgid "Security Alerts:"
+msgstr "Alertas de seguridad:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Protocolo europeo"
+msgid "Sweden"
+msgstr "Suecia"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocolo europeo (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Usar Expect para SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Seleccione su proveedor.\n"
-" Si no est谩 en la lista, elija No listado"
+msgid "Poland"
+msgstr "Polonia"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "M贸dem RDSI externo"
+msgid "Importance: %s\n"
+msgstr "Importancia: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Tarjeta RDSI interna"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"Por favor, marque si desea expulsar su cinta luego de la copia de seguridad."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "驴De qu茅 tipo es su conexi贸n RDSI?"
+msgid "Other ports"
+msgstr "Otros puertos"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Asistente para la configuraci贸n de la red"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "Cantidad de b煤feres de captura para la captura con mmap"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Configuraci贸n antigua (isdn4net)"
+msgid "SMBus controllers"
+msgstr "Controladores SMBus"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Configuraci贸n nueva (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Demora de la conexi贸n (en seg)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"驴Qu茅 configuraci贸n de RDSI prefiere?\n"
-"\n"
-"* La configuraci贸n antigua utiliza isdn4net. Tiene herramientas\n"
-" poderosas, pero es algo complicada de configurar para un reci茅n \n"
-" llegado, y no es est谩ndar.\n"
-"* La configuraci贸n nueva es m谩s f谩cil de entender, m谩s est谩ndar,\n"
-" pero con menos herramientas.\n"
-"\n"
-"Le recomendamos la configuraci贸n ligera (esto es, la nueva).\n"
+"Algunos de los primeros chips i486DX-100 no pueden volver a modo operativo "
+"sin problemas luego que se ejecuta la instrucci贸n \"halt\""
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Hacer nada"
+msgid "Croatian"
+msgstr "Croata"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Usar la partici贸n existente"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Instalar rpm"
+msgid "Unable to contact mirror %s"
+msgstr "No se puede contactar al sitio de r茅plica %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"winmodem basado en \"%s\" detectado, 驴desea instalar el software necesario?"
+msgid "/Help/_About..."
+msgstr "/Ayuda/_Acerca..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Title"
-msgstr "T铆tulo"
+msgid "Remove user directories before restore."
+msgstr "Borrar directorios de los usuarios antes de restaurar."
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"El sistema no soporta a su m贸dem.\n"
-"Eche un vistazo en http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Segundo servidor DNS (opcional)"
+"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
+"red funcionando, pero a煤n no ha configurado su red. Si sigue sin "
+"configuraci贸n de red, no podr谩 utilizar la impresoara que est谩 configurando "
+"ahora. 驴C贸mo desea proceder?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
+msgid "CUPS printer configuration"
+msgstr "Configuraci贸n de impresora CUPS"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Nombre de dominio"
+msgid "could not find any font in your mounted partitions"
+msgstr "no se pueden encontrar tipograf铆as en las particiones montadas"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "Bug F00F"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Por script"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Por terminal"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"驴Qu茅 cliente dhcp desea utilizar?\n"
+"dhcp-client es el predeterminado"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Nombre de dominio:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "ID de conexi贸n"
+msgid "On Floppy"
+msgstr "En disquete"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "N煤mero de tel茅fono"
+msgid "Restore"
+msgstr "Restaurar"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Nombre de la conexi贸n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"si se pone en s铆, verificar si los dispositivos de red est谩n en modo "
+"promiscuo."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opciones de llamada por m贸dem"
+msgid "Looking for available packages..."
+msgstr "Buscando los paquetes disponibles..."
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Seleccione el puerto serie al que est谩 conectado su m贸dem."
+msgid "Init Message"
+msgstr "Mensaje de inicio"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Configuraci贸n de la red"
+msgid "Rescue partition table"
+msgstr "Rescatar la tabla de particiones"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Ocurrieron problemas durante la configuraci贸n.\n"
-"Verifique su conexi贸n con net_monitor o mcc. Si su conexi贸n no funciona, "
-"puede que desee volver a iniciar la configuraci贸n"
+msgid "Connection complete."
+msgstr "Conexi贸n completa."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Despu茅s de esto, se recomienda que reinicie su entorno X\n"
-"para evitar el problema del cambio del nombre de la m谩quina."
+msgid "Cyprus"
+msgstr "Chipre"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicidades, la configuraci贸n de la red y de Internet ha terminado.\n"
-"\n"
-"Ahora se aplicar谩 la configuraci贸n a su sistema.\n"
+msgid "Remove from RAID"
+msgstr "Quitar del RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Ocurri贸 un problema mientras se reiniciaba la red: \n"
-"\n"
-"%s"
+"Esta clave de cifrado es demasiado simple\n"
+"(tiene que tener por lo menos una longitud de %d caracteres)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Se necesita reiniciar la red. 驴Desea reiniciarla?"
+msgid "Configuration Wizards"
+msgstr "Asistentes de configuraci贸n"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Configuraci贸n de la red"
+msgid "ISDN connection"
+msgstr "Conexi贸n RDSI"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "驴Desea iniciar su conexi贸n al arrancar?"
+msgid "primary"
+msgstr "primario"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Conexi贸n a Internet"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " en servidor SMB/Windows \"%s\", compartida como \"%s\""
-#: ../../network/netconnect.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Ha configurado m煤ltiples formas de conectarse a Internet.\n"
-"Seleccione la que quiere utilizar.\n"
+"Este di谩logo se usa para elegir los servicios que desea iniciar durante el\n"
+"arranque.\n"
+"\n"
+"DrakX listar谩 todos los servicios disponibles con la instalaci贸n corriente.\n"
+"Debe revisarlos con cuidado y quitar la marca de aquellos que no siempre\n"
+"son necesarios al arrancar.\n"
"\n"
+"Cuando se selecciona un servicio obtendr谩 un peque帽o texto explicativo\n"
+"acerca del mismo. Sin embargo, si no est谩 seguro si un servicio es 煤til o\n"
+"no, es m谩s seguro dejar el comportamiento predeterminado.\n"
+"\n"
+"!! Tenga mucho cuidado en esta etapa si pretende usar su m谩quina como un\n"
+"servidor: probablemente no desear谩 arrancar servicios que no necesita. Por\n"
+"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
+"en un servidor. En general, seleccione s贸lo aquellos servicios que\n"
+"realmente necesita. !!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Elija la conexi贸n que desea configurar"
+msgid "Skip"
+msgstr "Omitir"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "tarjeta(s) de red detectada(s)"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Conexi贸n a la red local"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
+"en el arranque del sistema."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "detectada conexi贸n por cable"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"La frecuencia de la CPU en MHz (Megahertz que en una primera aproximaci贸n se "
+"puede considerar como la cantidad de millones instrucciones que la CPU puede "
+"ejecutar por segundo)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Conexi贸n por cable"
+msgid "important"
+msgstr "importante"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "detectada"
+msgid "Total Progress"
+msgstr "Progreso total"
-#: ../../network/netconnect.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "Conexi贸n ADSL"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX primero detectar谩 cualquier dispositivo IDE presente en su\n"
+"computadora. Tambi茅n buscar谩 una o m谩s tarjetas SCSI PCI en su sistema. Si\n"
+"se encuentra una tarjeta SCSI, DrakX instalar谩 el controlador apropiado\n"
+"autom谩ticamente.\n"
+"\n"
+"Debido a que la detecci贸n de hardware a veces puede no detectar alguna\n"
+"pieza de hardware, DrakX puede no detectar sus discos r铆gidos. De ser as铆,\n"
+"tendr谩 que especificar su hardware a mano.\n"
+"\n"
+"Si tiene que seleccionar su adaptador SCSI PCI manualmente, DrakX le\n"
+"preguntar谩 si desea especificar opciones para el mismo. Deber铆a permitir\n"
+"que DrakX sondee el hardware buscando las opciones espec铆ficas necesarias\n"
+"para inicializar el adaptador. La mayor铆a de las veces, DrakX pasar谩 esta\n"
+"etapa sin problema alguno.\n"
+"\n"
+"Si DrakX no puede sondear las opciones para determinar autom谩ticamente qu茅\n"
+"par谩metros deben pasarse, necesitar谩 configurar manualmente el controlador."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "detectada %s"
+msgid "Users"
+msgstr "Usuarios"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Conexi贸n RDSI"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Conexi贸n por winmodem"
+msgid "Preparing bootloader..."
+msgstr "Preparando el cargador de arranque"
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "detectada en el puerto %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Pasarela de red (ej %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Conexi贸n normal por m贸dem"
+msgid "The passwords do not match"
+msgstr "Las contrase帽as no coinciden"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detectando los dispositivos..."
+msgid "Examples for correct IPs:\n"
+msgstr "Ejemplos de IP correctas:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Modo experto"
+msgid "Frequency (MHz)"
+msgstr "Frecuencia (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Usar detecci贸n autom谩tica"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Para utilizar esta selecci贸n de paquetes salvada, arranque la instalaci贸n "
+"con \"linux defcfg=floppy\""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Elija el perfil a configurar"
+msgid "the number of the processor"
+msgstr "el n煤mero del procesador"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenido al asistente para la configuraci贸n de la red\n"
-"\n"
-"Estamos a punto de configurar su conexi贸n de red/Internet.\n"
-"Si no desea usar la detecci贸n autom谩tica, desmarque la casilla.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Reloj interno puesto a GMT"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Puesto que est谩 realizando una instalaci贸n por red, su red ya est谩 "
-"configurada.\n"
-"Haga clic sobre aceptar para mantener su configuraci贸n, o pulse cancelar "
-"para\n"
-"volver a configurar sus conexiones de red y a Internet.\n"
+msgid "Give a file name"
+msgstr "Indique el nombre de un archivo"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ahora vamos a configurar la conexi贸n %s.\n"
-"\n"
-"\n"
-"Pulse siguiente para continuar."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Por favor, elija el puerto al que est谩 conectado su impresora."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ahora vamos a configurar la conexi贸n %s."
+msgid "Change Cd-Rom"
+msgstr "Cambie el CD-ROM"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Configuraci贸n y conexi贸n a Internet"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Configurar la conexi贸n"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "No hay un controlador conocido para su tarjeta de sonido (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Desconectar"
+msgid "force"
+msgstr "forzar"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Conectar"
+msgid "Exit"
+msgstr "Salir"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Puede volver a configurar su conexi贸n."
+"NOTA: Dependiendo del modelo de la impresora y del sistema de impresi贸n, se "
+"instalar谩n hasta %d MB de software adicional."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Se puede conectar a Internet o volver a configurar su conexi贸n."
+"No tiene configurada ninguna interfaz.\n"
+"Configure la primera haciendo clic sobre 'Configurar'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Ahora no est谩 conectado a Internet."
+msgid "Estonian"
+msgstr "Estonio"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"\n"
-"Puede desconectarse o volver a configurar su conexi贸n."
+"Apache es un servidor de p谩ginas web. Se usa para servir archivos HTML y "
+"programas CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Ahora est谩 conectado a Internet."
+msgid "Add/Del Clients"
+msgstr "A帽adir/Quitar clientes"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "La Url deber铆a empezar con 'ftp:' o 'http:'"
+msgid "Choose the network interface"
+msgstr "Elija la interfaz de red"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "El nombre del proxy debe ser http://..."
+msgid "Unknown Model"
+msgstr "Modelo desconocido"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "Proxy FTP"
+msgid "CD/DVD burners"
+msgstr "Grabadoras de CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partici贸n predeterminada de arranque\n"
+" (para arranque de MS-DOS, no para lilo)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Configuraci贸n de los proxies"
+msgid "choose image"
+msgstr "elija imagen"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Las direcciones de la pasarela deber铆an estar en el formato 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "隆Se detect贸 la configuraci贸n del cortafuegos!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Las direcciones del servidor DNS deber铆an estar en el formato 1.2.3.4"
+msgid "Connection name"
+msgstr "Nombre de la conexi贸n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela de red"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"coordenada x del cuadro de texto\n"
+"en cantidad de caracteres"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Pasarela de red (ej %s)"
+msgid "Updating package selection"
+msgstr "Actualizando la selecci贸n de paquetes"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Servidor DNS"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "驴D贸nde desea montar el archivo de loopback %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Por favor, defina el nombre de su m谩quina.\n"
-"El nombre de su m谩quina deber铆a ser un nombre de m谩quina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\".Tambi茅n puede introducir la direcci贸n "
-"IP de la pasarela si tiene una"
+"El disquete ha sido generado satisfactoriamente.\n"
+"Ahora puede repetir su instalaci贸n."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"La tasa deber铆a tener el sufijo k, M o G (por ejemplo, \"11M\" para 11M), o "
-"a帽adir suficientes '0' (ceros)"
+msgid "the number of buttons the mouse has"
+msgstr "la cantidad de botones que tiene el rat贸n"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"La frec. deber铆a tener el sufijo k, M o G (por ejemplo, \"2.46G\" para una "
-"frec. de 2.46 GHz), o a帽adir suficientes '0' (ceros)"
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "Iniciar al arrancar"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Asignar nombre de m谩quina desde direcci贸n DHCP"
+"Por favor, ingrese el directorio (o m贸dulo) para\n"
+" poner la copia de respaldo en este host."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "\"Enchufe en caliente\" de la red"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Id tarjeta de red (煤til para port谩tiles)"
+msgid "Replay"
+msgstr "Reproducir"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "Nombre de la m谩quina DHCP"
+msgid "Backup other files"
+msgstr "Respaldar otros archivos"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "M谩scara de red"
+msgid "No floppy drive available"
+msgstr "Ninguna disquetera disponible"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "Direcci贸n IP"
+msgid "Backup files are corrupted"
+msgstr "Los archivos de respaldo est谩n corruptos"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Norma de TV:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "Direcci贸n IP autom谩tica"
+msgid "Cpuid family"
+msgstr "Familia de cpuid"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando el dispositivo de red %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituano AZERTY (nuevo)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-"Por favor, introduzca la direcci贸n IP de esta m谩quina.\n"
-"Cada valor tiene que introducirse como una direcci贸n IP en notaci贸n\n"
-"decimal con puntos (por ejemplo: 1.2.3.4)."
+"s铆, siginfica que el coprocesador matem谩tico tiene adjunto un vector de "
+"excepciones"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
-"con Internet.\n"
-"Simplemente acepte para mantener la configuraci贸n del dispositivo.\n"
-"Al modificar los campos de abajo se ignorar谩 esta configuraci贸n."
+"Eligi贸 una partici贸n RAID en software como partici贸n ra铆z (/).\n"
+"Ning煤n cargador de arranque es capaz de manejar esto sin una partici贸n /"
+"boot.\n"
+"Por favor, aseg煤rese de a帽adir una partici贸n /boot."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"隆Atenci贸n! Se ha detectado la configuraci贸n del cortafuegos existente. Puede "
-"que necesite alg煤n ajuste manual tras la instalaci贸n."
+msgid "Previous"
+msgstr "Anterior"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "隆Se detect贸 la configuraci贸n del cortafuegos!"
+msgid "Other OS (MacOS...)"
+msgstr "Otro SO (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Contrase帽a de la cuenta"
+msgid "To activate the mouse,"
+msgstr "Para activar el rat贸n,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Usuario de la cuenta (nombre de usuario)"
+msgid "Bringing up the network"
+msgstr "Levantando la red"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Demora de la conexi贸n (en seg)"
+msgid "Screenshots will be available after install in %s"
+msgstr ""
+"Luego de la instalaci贸n estar谩n disponibles las instant谩neas de pantalla en %"
+"s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Velocidad de la conexi贸n"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Se ha detectado m谩s de una partici贸n Microsoft Windows en su disco r铆gido.\n"
+"Por favor, elija aquella a la cual desea cambiar el tama帽o para poder\n"
+"instalar su sistema operativo Mandrake Linux nuevo.\n"
+"\n"
+"Cada partici贸n se lista como sigue: \"Nombre Linux\", \"Nombre Windows\",\n"
+"\"Capacidad\".\n"
+"\n"
+"\"Nombre Linux\" est谩 estructurado: \"tipo de disco r铆gido\", \"n煤mero de\n"
+"disco r铆gido\", \"n煤mero de partici贸n\" (por ejemplo, \"hda1\").\n"
+"\n"
+"\"Tipo de disco r铆gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
+"el mismo es un disco SCSI.\n"
+"\n"
+"\"N煤mero de disco r铆gido\" siempre es una letra que sigue a \"hd\" o a\n"
+"\"sd\". Para los discos IDE:\n"
+"\n"
+" * \"a\" significa \"disco r铆gido maestro en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"b\" significa \"disco r铆gido esclavo en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"c\" significa \"disco r铆gido maestro en la controladora IDE\n"
+"secundaria\",\n"
+"\n"
+" * \"d\" significa \"disco r铆gido esclavo en la controladora IDE\n"
+"secundaria\".\n"
+"\n"
+"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
+"significa \"segunda SCSI ID menor\", etc.\n"
+"\n"
+"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
+"primer disco o partici贸n se denomina \"C:\")."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Modo de marcaci贸n"
+msgid "Tanzania"
+msgstr "Tanzania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Elija su pa铆s"
+msgid "Computing FAT filesystem bounds"
+msgstr "Calculando los l铆mites del sistema de archivos FAT"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveedor (opcional)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Fuentes de respaldo: \n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveedor (opcional)"
+msgid "Content of the file"
+msgstr "Contenido del archivo"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "N煤mero de tel茅fono del proveedor"
+msgid "Authentication LDAP"
+msgstr "Autentificaci贸n LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nombre del proveedor (ej proveedor.net)"
+msgid "Let me pick any driver"
+msgstr "Permitirme elegir cualquier controlador"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Su n煤mero de tel茅fono personal"
+msgid "Profile "
+msgstr "Perfil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 de la tarjeta"
+msgid "transmitted"
+msgstr "transmitido"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "E/S_0 de la tarjeta"
+msgid "Palestine"
+msgstr "Palestina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "E/S de la tarjeta"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memoria (DMA) de la tarjeta"
+msgid "%d comma separated strings"
+msgstr "%d cadenas de caracteres separadas por comas"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de la tarjeta"
+msgid "Here is the full list of keyboards available"
+msgstr "Aqu铆 tiene la lista completa de teclados disponibles"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Por favor, complete o verifique el campo de abajo"
+msgid "Theme name"
+msgstr "Nombre del tema"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Configuraci贸n de la conexi贸n"
+msgid "/_Help"
+msgstr "/A_yuda"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"El sistema no parece estar conectado a la Internet.\n"
-"Intente volver a configurar su conexi贸n."
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Por motivos de seguridad, se desconectar谩 ahora."
+"Aqu铆 puede elegir si los esc谩neres conectados a esta m谩quina deber铆an poder "
+"accederse desde m谩quinas remotas y desde qu茅 m谩quinas remotas."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ahora el sistema est谩 conectado a la Internet."
+msgid "the width of the progress bar"
+msgstr "el ancho de la barra de progreso"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Probando su conexi贸n..."
+msgid "Cook Islands"
+msgstr "Islas Cook"
-#: ../../network/tools.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "驴Desea intentar conectarse a Internet ahora?"
+msgid "Formatting partition %s"
+msgstr "Formateando la partici贸n %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet configuration"
-msgstr "Configuraci贸n de Internet"
+msgid "Hostname required"
+msgstr "Se necesita nombre del host"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Est谩 ocurriendo algo malo en su unidad. \n"
-"Ha fallado una prueba para verificar la integridad de los datos. \n"
-"Esto significa que escribir cualquier cosa en el disco terminar谩 produciendo "
-"datos aleatorios, corruptos."
+msgid "Unselect fonts installed"
+msgstr "Desmarcar las tipograf铆as instaladas"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid " (Default)"
-msgstr " (Por defecto)"
+msgid "Cancel"
+msgstr "Cancelar"
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "En servidor CUPS \"%s\""
+msgid "Searching for configured scanners ..."
+msgstr "Buscando esc谩neres configurados ..."
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Impresoras remotas"
+msgid "Wheel"
+msgstr "Rueda"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Videocard"
+msgstr "Tarjeta de v铆deo"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(on this machine)"
-msgstr "(en esta m谩quina)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tRespaldar usando tar y bzip2\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
+msgid "Remove Selected"
+msgstr "Quitar los seleccionados."
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-"CUPS - Common Unix Printing System (Sistema de impresi贸n com煤n de Unix)"
+msgid "/Autodetect _modems"
+msgstr "/Autodetectar _m贸dems"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Remove printer"
+msgstr "Borrar impresora"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR de nueva generaci贸n"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"隆ADVERTENCIA!\n"
+"\n"
+"Ahora DrakX cambiar谩 el tama帽o de su partici贸n Windows. Proceda con "
+"cuidado:\n"
+"esta operaci贸n es peligrosa. Si a煤n no lo hizo, primero deber铆a salir de\n"
+"la instalaci贸n, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
+"defrag),\n"
+"y luego volver a iniciar la instalaci贸n. Tambi茅n deber铆a hacer una copia de\n"
+" seguridad de sus datos.\n"
+"Cuando est茅 seguro, pulse sobre Aceptar."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "驴A qu茅 servicios desear铆a permitir conectarse desde la Internet?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon (Demonio de impresora de l铆neas)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Bienvenido a la herramienta de configuraci贸n del correo.\n"
+"\n"
+"Aqu铆 podr谩 configurar su sistema de alerta.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Other"
+msgstr "Otros"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
+msgid "Default"
+msgstr "Por defecto"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Modelo desconocido"
+msgid "Button 2 Emulation"
+msgstr "Emulaci贸n del bot贸n 2"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Modelo desconocido"
+msgid "type1inst building"
+msgstr "Construyendo Type1"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Puerto %s)"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Host %s"
-msgstr "Host %s"
+msgid "choose image file"
+msgstr "elija un archivo de imagen"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Network %s"
-msgstr "Red %s"
+msgid "X server"
+msgstr "Servidor X"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfaz \"%s\""
+msgid "Domain Admin User Name"
+msgstr "Nombre de usuario del Administrador del Dominio"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Local network(s)"
-msgstr "Red(es) local(es)"
+msgid "There was an error while scanning for TV channels"
+msgstr "Hubo un error mientras se buscaban canales de TV"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Impresora \"en crudo\" (sin controlador)"
+msgid "US keyboard (international)"
+msgstr "Estadounidense (internacional)"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ", using command %s"
-msgstr ", usando comando %s"
+msgid "Not installed"
+msgstr "No instalado"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " en servidor Novell \"%s\", impresora \"%s\""
+msgid "LAN connection"
+msgstr "Conexi贸n a la red local"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " en servidor SMB/Windows \"%s\", compartida como \"%s\""
+msgid "/File/-"
+msgstr "/Archivo/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", puerto %s"
+msgid "Italian"
+msgstr "Italiano"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LPD \"%s\", impresora \"%s\""
+msgid "Basic"
+msgstr "B谩sico"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ", printing to %s"
-msgstr ", imprimiendo en %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+"Copyright (C) 2002 por MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", dispositivo multifunci贸n"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunci贸n en HP JetDirect"
+msgid "pdq"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multi-funci贸n en USB"
+msgid "Card IO"
+msgstr "E/S de la tarjeta"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", dispositivo multifunci贸n en puerto paralelo \\#%s"
+msgid "when checked, owner and group won't be changed"
+msgstr "cuando est谩 marcado, el grupo y el due帽o no se cambiar谩n"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", impresora USB"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Esta partici贸n especial de Bootstrap\n"
+"es para el arranque\n"
+"dual de su sistema.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", impresora USB \\#%s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Por favor, elija para cada paso si desea que se repita como su instalaci贸n, "
+"o el mismo ser谩 manual"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " en el puerto paralelo \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Tambi茅n puede decidir aqu铆 si los esc谩neres en las m谩quinas remotas deber铆an "
+"estar disponibles autom谩ticamente en esta m谩quina."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printers"
-msgstr "Impresoras locales"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Red por FTP.\n"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Filtrar el trabajo en un comando"
+msgid "Russian (Yawerty)"
+msgstr "Ruso (Yawerty)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Introduzca el URI del dispositivo de impresi贸n"
+msgid "You must enter a device or file name!"
+msgstr "Debe introducir un dispositivo un un nombre de archivo"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Impresora en un servidor NetWare"
+msgid "/_Quit"
+msgstr "/_Salir"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Necesita el microc贸digo Alcatel.\n"
+"Desc谩rguelo en\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"y copie mgmt.o en /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de red (TCP/Socket)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Memoria de la tarjeta gr谩fica: %s KB\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Impresora en un servidor lpd remoto"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" Este programa es software libre; puede redistribuirlo y/o modificarlo\n"
+" bajo los t茅rminos de la Licencia P煤blica General GNU publicada por la\n"
+" Free Software Foundation; ya sea la versi贸n 2, o (a su opci贸n) cualquier\n"
+" versi贸n posterior.\n"
+"\n"
+" Este programa se distribuye con la esperanza que ser谩 煤til, pero\n"
+" SIN GARANT脥A ALGUNA; incluso sin la garant铆a impl铆cita de COMERCIABILIDAD\n"
+" o ADECUABILIDAD PARA UN PROP脫SITO PARTICULAR. Consulte la\n"
+" Licencia P煤blica General GNU para m谩s detalles.\n"
+"\n"
+" Deber铆a haber recibido una copia de la Licencia P煤blica General GNU\n"
+" junto con este programa; de no ser as铆, escriba a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Impresora en un servidor CUPS remoto"
+msgid "access to compilation tools"
+msgstr "acceso a herramientas de compilaci贸n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote printer"
-msgstr "Impresora remota"
+msgid "Please select data to restore..."
+msgstr "Por favor, seleccione los datos a restaurar..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Impresora local"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
+"suficiente) al principio del disco"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Configurando las aplicaciones..."
+msgid "Standard test page"
+msgstr "P谩gina de prueba est谩ndar"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Create"
+msgstr "Crear"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Quitando la impresora \"%s\" ..."
+msgid "What"
+msgstr "Qu茅"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "驴Seguro que quiere borrar la impresora \"%s\"?"
+msgid "There was an error ordering packages:"
+msgstr "Hubo un error al ordenar los paquetes:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Borrar impresora"
+msgid "Bulgarian (BDS)"
+msgstr "B煤lgaro (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Aprender como usar esta impresora"
+msgid "Disable Server"
+msgstr "Deshabilitar el Servidor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Imprimir la(s) p谩gina(s) de prueba"
+msgid "Filesystem encryption key"
+msgstr "Clave de cifrado del sistema de archivos"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org/GIMP."
+msgid "Gujarati"
+msgstr "Indio (Gujarati)"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"La impresora \"%s\" se quit贸 satisfactoriamnete de Star Office/OpenOffice."
-"org."
+"Por favor, seleccione el primer n煤mero del rango de 10 que desee\n"
+"editar, o pulse Intro para continuar.\n"
+"驴Su elecci贸n?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Quitando la impresora de Star Office/OpenOffice.org/GIMP"
+msgid "Save theme"
+msgstr "guardar tema"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Quitar esta impresora de Star Office/OpenOffice.org/GIMP"
+msgid "group"
+msgstr "grupo"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org/GIMP."
+msgid "Brazil"
+msgstr "Brasil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"La impresora \"%s\" se agreg贸 satisfactoriamente a Star Office/OpenOffice."
-"org."
+msgid "Auto Install"
+msgstr "Instalaci贸n autom谩tica"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Agregando impresora a Star Office/OpenOffice.org/GIMP"
+msgid "Network Configuration Wizard"
+msgstr "Asistente para la configuraci贸n de la red"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Agregar esta impresora a Star Office/OpenOffice.org/GIMP"
+msgid "Removable media automounting"
+msgstr "Montaje autom谩tico de dispositivos extra铆bles"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
+msgid "Printing"
+msgstr "Imprimiendo"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Impresora predeterminada"
+msgid "Unkown driver"
+msgstr "Controlador desconocido"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Poner esta impresora como predeterminada"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "No se encontraron impresoras conectadas directamente a su m谩quina"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Opciones de la impresora"
+msgid "Create a new partition"
+msgstr "Crear una partici贸n nueva"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Fabricante de la impresora, modelo"
+msgid "Driver:"
+msgstr "Controlador:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricante de la impresora, modelo, controlador"
+msgid "unknown"
+msgstr "desconocido"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Quitando la impresora antigua \"%s\" ..."
+msgid "Use fdisk"
+msgstr "Usar fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Nombre de la impresora, descripci贸n, ubicaci贸n"
+msgid "MOVE YOUR WHEEL!"
+msgstr "隆MUEVA SU RUEDA!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tipo de conexi贸n de la impresora"
+msgid "sent: "
+msgstr "enviado: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Impresora en crudo"
+msgid "Automatic IP"
+msgstr "Direcci贸n IP autom谩tica"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Do it!"
-msgstr "隆Hacerlo!"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Ya est谩. Ahora la instalaci贸n est谩 completa y su sistema GNU/Linux est谩\n"
+"listo para ser utilizado. Simplemente haga clic sobre \"%s\" para volver a\n"
+"arrancar el sistema. Lo primero que deber铆a ver tan pronto como su m谩quina\n"
+"haya finalizado sus pruebas de hardware, es el men煤 del cargador de\n"
+"arranque d谩ndole la opci贸n de elegir que sistema operativo arrancar.\n"
+"\n"
+"El bot贸n \"%s\" le muestra dos botones m谩s para:\n"
+"\n"
+" * \"%s\": para crear un disquete de instalaci贸n que realizar谩 una\n"
+"instalaci贸n completa autom谩ticamente, sin la asistencia de un operador,\n"
+"similar a la instalaci贸n que ha configurado reci茅n.\n"
+"\n"
+" Note que hay dos opciones diferentes disponibles despu茅s de hacer clic\n"
+"sobre el bot贸n:\n"
+"\n"
+" * \"%s\" . Esta es una instalaci贸n parcialmente automatizada. La etapa\n"
+"de particionado es el 煤nico procedimiento interactivo.\n"
+"\n"
+" * \"%s\" . Instalaci贸n completamente automatizada: el disco r铆gido se\n"
+"sobreescribe por completo, y se pierden todos los datos.\n"
+"\n"
+" Esta caracter铆stica es muy 煤til cuando se instala una cantidad grande de\n"
+"m谩quinas similares. Consulte la secci贸n Auto install (en ingl茅s) en nuestro\n"
+"sitio web para m谩s informaci贸n.\n"
+"\n"
+" * \"%s\"(*): guarda una lista de los paquetes seleccionados en esta\n"
+"instalaci贸n. Para usar esta selecci贸n con otra instalaci贸n, inserte el\n"
+"disquete en la disquetera y comience la instalaci贸n. En el prompt, presione\n"
+"la tecla [F1], y a continuaci贸n ingrese >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
+"teclee \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Close"
-msgstr "Cerrar"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impresora %s\n"
-"驴Qu茅 desea modificar de esta impresora?"
+msgid "Configuration of a remote printer"
+msgstr "Configuraci贸n de una impresora remota"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Modificar configuraci贸n de la impresora"
+msgid "Moldova"
+msgstr "Moldavia"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add a new printer"
-msgstr "A帽adir una impresora nueva"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Por favor, marque si primero desea borrar su cinta."
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Normal Mode"
-msgstr "Modo normal"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+"Una plataforma en l铆nea para responder a las necesidades espec铆ficas de "
+"soporte de la compa帽铆a."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Cambiar el sistema de impresi贸n"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "La Url deber铆a empezar con 'ftp:' o 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Configuraci贸n de CUPS"
+msgid "Add a new rule at the end"
+msgstr "A帽adir una regla nueva al final"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
-"remotas)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Mostrar todas las impresoras CUPS remotas"
+"Tambi茅n puede decidir aqu铆 si las impresoras en las m谩quinas remotas "
+"deber铆an estar disponibles autom谩ticamente en esta m谩quina."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Est谩n configuradas las impresoras siguientes. Haga doble clic sobre una de "
-"ellas para modificarla, para configurarla como predeterminada, o para "
-"obtener informaci贸n sobre la misma."
+"Aqu铆 deben ir las diferentes opciones para el m贸dulo %s.\n"
+"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
+"Por ejemplo, \"io=0x300 irq=7\""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Sistema de impresi贸n: "
+msgid "Quit without writing the partition table?"
+msgstr "驴Salir del programa sin grabar la tabla de particiones?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Verificando software instalado..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalando Foomatic ..."
+msgid "Installing packages..."
+msgstr "Instalando paquetes..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "隆Fall贸 la configuraci贸n de la impresora \"%s\"!"
+msgid "Dutch"
+msgstr "Holand茅s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Configurando la impresora \"%s\" ..."
+msgid "The following packages need to be installed:\n"
+msgstr "Se deben instalar los siguientes paquetes:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Leyendo los datos de la impresora ..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "驴Qu茅 sistema de impresi贸n (spooler) desea usar?"
+msgid "service setting"
+msgstr "configuraci贸n del servicio"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Seleccione sistema de impresi贸n (spooler)"
+msgid "Custom"
+msgstr "Personalizada"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Configurando impresora predeterminada..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "El archivo ya lo utiliza otro dispositivo loopback, seleccione otro"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Instalando %s ..."
+msgid "Read-only"
+msgstr "S贸lo lectura"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Quitando %s ..."
+msgid "Latvia"
+msgstr "Letonia"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema de impresi贸n (%s) no se iniciar谩 autom谩ticamente cuando arranque "
-"la m谩quina.\n"
-"\n"
-"Es posible que el inicio autom谩tico se desactiv贸 al cambiar a un nivel de "
-"seguridad mayor, porque el sistema de impresi贸n es un potencial punto de "
-"ataques.\n"
-"\n"
-"驴Desea volver a activar el inicio autom谩tico de la impresi贸n cuando el "
-"sistema se vuelva a encender?"
+msgid "No known driver"
+msgstr "No hay controlador conocido"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Iniciar el sistema de impresi贸n al arrancar"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"Si no es una de las que desea configurar, introduzca un nombre de "
+"dispositivo o archivo en la l铆nea de entrada"
+
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Va a instalar el sistema de impresi贸n %s sobre un sistema corriendo en el "
-"nivel de seguridad %s.\n"
+"No se detect贸 tarjeta de sonido en su m谩quina. Por favor, verifique que "
+"tiene conectada correctamente una tarjeta de sonido soportada por Linux.\n"
"\n"
-"Este sistema de impresi贸n ejecuta un demonio (proceso en segundo plano) que "
-"espera trabajos de impresi贸n y los gestiona. Las m谩quinas remotas pueden "
-"acceder tambi茅n a este demonio a trav茅s de la red, as铆 que es un potencial "
-"punto de ataque. Por eso, s贸lo unos pocos demonios seleccionados se inician "
-"por defecto en este nivel de seguridad.\n"
"\n"
-"驴Seguro que desea configurar la impresi贸n para esta m谩quina?"
+"Puede visitar nuestra base de datos de hardware en:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalando un sistema de impresi贸n en el nivel de seguridad %s"
+msgid "Configure Local Area Network..."
+msgstr "Configurar la red de 谩rea local..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "Paranoica"
+msgid "Launch the sound system on your machine"
+msgstr "Lanza el sistema de sonido en su m谩quina"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "Alta"
+msgid "Preparing printer database..."
+msgstr "Preparando base de datos de impresoras ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Reiniciando el sistema de impresi贸n ..."
+msgid "Information"
+msgstr "Informaci贸n"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Configuraci贸n de una impresora remota"
+msgid "No network card"
+msgstr "Sin tarjeta de red"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
-"verifique su configuraci贸n y su hardware. Luego, intente configurar su "
-"impresora remota de nuevo."
+msgid "Which filesystem do you want?"
+msgstr "驴Qu茅 sistema de archivos desea?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"La configuraci贸n de la red hecha durante la instalaci贸n no se puede iniciar "
-"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
-"sistema y corrija la configuraci贸n usando el Centro de control de Mandrake, "
-"secci贸n \"Redes e Internet\"/\"Conexi贸n\", y tras esto configure la "
-"impresora, tambi茅n utilizando el Centro de Control de Mandrake, secci贸n "
-"\"Hardware\"/\"Impresora\"."
+msgid "3 buttons"
+msgstr "3 botones"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Configurar la red ahora"
+msgid "Detailed information"
+msgstr "Informaci贸n detallada"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Continuar sin configurar la red"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
-"red funcionando, pero a煤n no ha configurado su red. Si sigue sin "
-"configuraci贸n de red, no podr谩 utilizar la impresoara que est谩 configurando "
-"ahora. 驴C贸mo desea proceder?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Funcionalidad de red no configurada"
+"Configuraciones predeterminadas de la impresora\n"
+"\n"
+"Deber铆a asegurarse que el tama帽o de p谩gina y el tipo de tinta/modo de "
+"impresi贸n (si corresponde) y tambi茅n la configuraci贸n de hardware de las "
+"impresoras l谩ser (memoria, unidad de d煤plex, bandejas adicionales) est谩n "
+"configurados correctamente. Note que una calidad de impresi贸n o resoluci贸n "
+"extremadamente alta puede ser bastante lenta."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "Iniciando la red ..."
+msgid "This floppy is not FAT formatted"
+msgstr "Este disquete no est谩 formateado con FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Refrescando datos de impresora ..."
+msgid "Configuring network"
+msgstr "Configurando la red"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ha transferido su impresora por defecto anterior (\"%s\"), 驴Deber铆a ser "
-"tambi茅n la impresora por defecto bajo el nuevo sistema de impresi贸n %s?"
+msgid "Graphic Card"
+msgstr "Tarjeta gr谩fica"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Transferir configuraci贸n de la impresora"
+msgid "Resizing Windows partition"
+msgstr "Calculando los l铆mites del sistema de archivos Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Transfiriendo %s ..."
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 del proveedor (opcional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Nuevo nombre de la impresora"
+msgid "Cameroon"
+msgstr "Camer煤n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impresora \"%s\" ya existe,\n"
-"驴realmente desea sobre-escribir la configuraci贸n de la misma?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"El nombre de la impresora s贸lo deber铆a contener letras, n煤meros y el gui贸n "
-"bajo"
+"Ahora puede particionar %s.\n"
+"Cuando haya terminado, no se olvide de guardar usando 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Transferir"
+msgid "Close"
+msgstr "Cerrar"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Ya existe una impresora denominada \"%s\" bajo %s. \n"
-"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
-"Tambi茅n puede ingresar un nombre nuevo o saltear esta impresora."
+"\"%s\": verifique la selecci贸n corriente del pa铆s. Si Usted no se encuentra\n"
+"en este pa铆s haga clic sobre el bot贸n \"%s\" y elija otro. Si su pa铆s no se\n"
+"muestra en la primer lista haga clic sobre el bot贸n \"%s\" para obtener la\n"
+"lista completa de pa铆ses."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "No transferir impresoras"
+msgid "Calendar"
+msgstr "Calendario"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"Marque las impresoras que desea transferir y haga clic \n"
-"sobre \"Transferir\"."
+"Restaurar entrada\n"
+"del Cat谩logo seleccionada"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"Tampoco se pueden transferir las impresoras configuradas con los archivos "
-"PPD provistos por sus fabricantes o con controladores CUPS nativos."
+"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
+"del servidor de impresi贸n y el nombre de la impresora en ese servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Adem谩s, las colas no creadas con este programa o con \"foomatic-configure\" "
-"no se pueden transferir."
+msgid "Iceland"
+msgstr "Islandia"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD y LPRng no soportan impresoras IPP.\n"
+msgid "consolehelper missing"
+msgstr "falta \"consolehelper\""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ s贸lo soporta impresoras locales, impresoras LPD remotas, e impresoras "
-"Socket/TCP.\n"
+msgid "stopped"
+msgstr "parado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no soporta impresoras en servidores Novell o impresoras que env铆an los "
-"datos en un comando formado libremente.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Si la FPU tiene o no un vector de irq"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Puede copiar la configuraci贸n de la impresora que ha realizado para la cola %"
-"s a %s, su cola corriente. Todos los datos de configuraci贸n (nombre de la "
-"impresora, descripci贸n, ubicaci贸n, tipo de conexi贸n, y opciones "
-"predeterminadas) se transfieren, pero los trabajos de impresi贸n no se "
-"transfieren.\n"
-"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Su impresora se configur贸 autom谩ticamente para darle acceso a las unidades "
-"de tarjetas de fotos desde su PC. Ahora puede acceder a sus tarjetas de "
-"fotos utilizando el programa gr谩fico \"MtoolsFM\" (Men煤: \"Aplicaciones\" -> "
-"\"Herramientas de Archivo\" -> \"Administrador de archivos MTools\") o los "
-"utilitarios \"mtools\" de l铆nea de comandos (teclee \"man mtools\" para m谩s "
-"informaci贸n). Encontrar谩 el sistema de archivos de la tarjeta bajo la letra "
-"de unidad \"p:\", o letras de unidad subsiguientes cuando tiene m谩s de una "
-"impresora HP con unidades de tarjetas de fotos. En \"MtoolsFM\" puede "
-"cambiar entre las letras de unidad con el campo en la esquina superior "
-"derecha de la lista de archivos."
+msgid "Expand Tree"
+msgstr "Expandir el 谩rbol"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Su dispositivo multifunci贸n se configur贸 autom谩ticamente para poder "
-"escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:%s\" "
-"para especificar el esc谩ner si tiene m谩s de uno) desde la l铆nea de comandos "
-"o con las interfaces gr谩ficas \"xscanimage\" o \"xsane\". Si est谩 usando "
-"GIMP, tambi茅n puede escanear seleccionado la entrada apropiada del men煤 "
-"\"Archivo\"/\"Adquirir\". Ejecute tambi茅n \"man scanimage\" en la l铆nea de "
-"comandos para obtener m谩s informaci贸n.\n"
+"El controlador antiguo \"%s\" est谩 en la lista negra.\n"
"\n"
-"隆No utilice \"scannerdrake\" para este dispositivo!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Imprimir la(s) p谩gina(s) de prueba..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Imprimir lista de opciones"
+"Ha sido reportado como problem谩tico para el n煤cleo al descargarlo.\n"
+"\n"
+"El controlador nuevo \"%s\" s贸lo se utilizar谩 en el pr贸ximo arranque."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Imprimiendo en la impresora \"%s\""
+msgid "Expert Mode"
+msgstr "Modo experto"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Acceso de tarjetas de Impresora/Foto en \"%s\""
+msgid "Printer options"
+msgstr "Opciones de la impresora"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Imprimiendo/Escaneando en \"%s\""
+msgid "Local Network adress"
+msgstr "Direcci贸n de red local"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tarjetas de Impresora/Escaner/Foto en \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Respaldar sus archivos del sistema. (directorio /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Para conocer las opciones disponibles para la impresora corriente lea la "
-"lista que se muestra debajo o haga clic sobre el bot贸n \"Imprimir lista de "
-"opciones\".%s%s%s\n"
+"Ahora tiene la oportunidad de bajar paquetes actualizados. Estos paquetes\n"
+"se han actualizad despu茅s de que se public贸 la distribuci贸n. Puede que los\n"
+"mismos contengan correcciones de bugs o de seguridad.\n"
+"\n"
+"Para descargar estos paquetes, necesitar谩 tener una conexi贸n con la\n"
+"Internet que est茅 funcionando.\n"
+"\n"
+"驴Desea instalar las actualizaciones?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Servidor Samba"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumentos: (arg)\n"
"\n"
-" Los comandos \"%s\" y \"%s\" tambi茅n permiten modificar las opciones de "
-"configuraci贸n para un trabajo de impresi贸n particular. Simplemente a帽ada las "
-"opciones deseadas a la l铆nea de comando, por ejemplo \"%s <archivo>\".\n"
+"Habilitar/deshabilitar protecci贸n contra enga帽o de IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Tambi茅n puede utilizar el interfaz gr谩fico \"xpdq\" para configurar las "
-"opciones y manipular los trabajos de impresi贸n.\n"
-"Si est谩 usando KDE como entorno de escritorio tiene un \"bot贸n de p谩nico\", "
-"un icono en su escritorio etiquetado como \"隆DETENER impresora!\", que "
-"detiene todos los trabajos de impresi贸n inmediatamente cuando hace clic en "
-"茅l. Esto es 煤til, por ejemplo, para atascos de papel.\n"
+msgid "Australian Optus cable TV"
+msgstr "Televisi贸n por cable Australian Optus"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Este comando tambi茅n se utiliza en el campo \"Comando de impresi贸n\" de los "
-"di谩logos de impresi贸n de muchas aplicaciones. Pero aqu铆 no se da el nombre "
-"del archivo porque el nombre del archivo a imprimir lo proporciona la "
-"aplicaci贸n.\n"
+" <Tab>/<Alt-Tab> entre elementos | <espacio> selecciona | <F12> pantalla "
+"sig. "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la l铆nea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
+msgid "Subnet:"
+msgstr "Subred:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Para obtener una lista de las opciones disponibles para la impresora actual, "
-"haga clic en el bot贸n \"Imprimir lista de opciones\"."
+msgid "Zimbabwe"
+msgstr "Zimbaue"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"El comando \"%s\" tambi茅n permite modificar las opciones de configuraci贸n "
-"para un trabajo de impresi贸n determinado. Simplemente, a帽ada las "
-"configuraciones deseadas a la l铆nea de comando, por ejemplo \"%s <archivo>"
-"\". "
+msgid "Please enter the host name or IP."
+msgstr "Por favor, ingrese el nombre o la IP del host"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la l铆nea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\".\n"
+msgid "When"
+msgstr "Cu谩ndo"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Segundo servidor DNS (opcional)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finlandia"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Aqu铆 tiene una lista de las opciones disponibles para la impresora actual:\n"
+"Argumentos: (arg)\n"
"\n"
+"Autorizar todos los servicios controlados por tcp_wrappers (ver hosts.deny"
+"(5)) si \\fIarg\\fP = ALL. S贸lo los locales\n"
+"si \\fIarg\\fP = LOCAL y ninguno si \\fIarg\\fP = NONE. Para autorizar los "
+"servicios que necesita, use /etc/hosts.allow\n"
+"(ver hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Estos comando tambi茅n se utilizan en el campo \"Comando de impresi贸n\" de "
-"los di谩logos de impresi贸n de muchas aplicaciones, pero aqu铆 no se indica el "
-"nombre del archivo porque el archivo a imprimir lo proporciona la "
-"aplicaci贸n.\n"
+msgid "Color depth: %s\n"
+msgstr "Profundidad de color: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Para imprimir un archivo desde la l铆nea de comando (ventana de terminal) "
-"utilice el comando \"%s <archivo>\" o una herramienta de impresi贸n gr谩fica: "
-"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas gr谩ficas le "
-"permiten seleccionar la impresora y modificar las opciones de configuraci贸n "
-"f谩cilmente.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "No puede desmarcar este paquete. Debe ser actualizado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "驴Funcion贸 adecuadamente?"
+msgid "Loading from floppy"
+msgstr "Cargando desde un disquete"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"La(s) p谩gina(s) de prueba se enviaron al demonio de impresi贸n.\n"
-"Puede que pase algo de tiempo antes de que comience la impresi贸n.\n"
+"Drakperm se utiliza para ver archivos a utilizar para ajustar los permisos, "
+"due帽os, y grupos por medio de msec.\n"
+"Tambi茅n puede editar sus reglas propias que sobre-escribir谩n las "
+"predeterminadas."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(s) p谩gina(s) de prueba se enviaron a la impresora.\n"
-"Puede que pase algo de tiempo antes de que comience la impresi贸n.\n"
-"Estado de la impresi贸n:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "No imprimir ninguna p谩gina de prueba"
+msgid "Slovenia"
+msgstr "Eslovenia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "P谩gina de prueba de foto"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Introduzca un usuario\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "P谩gina de prueba alternativa (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- Dispositivos PCI y USB : esto lista el fabricante, dispositivo, ids del "
+"subfabricante y del subdispositivo PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "P谩gina de prueba alternativa (Letter)"
+msgid "ProgressBar color selection"
+msgstr "selecci贸n del color de la barra de progreso"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "P谩gina de prueba est谩ndar"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Aqu铆 est谩n las diferentes entradas.\n"
+"Puede a帽adir otras o cambiar las que ya existen."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Imprimir"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "No hay p谩ginas de prueba"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Por favor, seleccione las p谩ginas de prueba que quiere imprimir.\n"
-"Nota: la p谩gina de prueba de foto puede tardar mucho tiempo en ser impresa e "
-"incluso en impresoras l谩ser con muy poca memoria puede que no salga. En la "
-"mayor铆a de los casos, basta con imprimir la p谩gina de prueba est谩ndar."
+"Ejecuta los comandos programados por el comando at en el momento\n"
+"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
+"la carga promedio del sistema es suficientemente baja."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "P谩ginas de prueba"
+msgid "Radio support:"
+msgstr "Soporte para radio :"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"驴Quiere configurar esta impresora (\"%s\")\n"
-"como la impresora predeterminada?"
+msgid "Installing SANE packages..."
+msgstr "Instalando paquetes SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "隆La opci贸n %s est谩 fuera de rango"
+msgid "boot disk creation"
+msgstr "Creado de disquetes que arrancan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "隆La opci贸n %s debe ser un n煤mero!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "隆La opci贸n %s debe ser un n煤mero entero!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Configuraciones predeterminadas de la impresora"
+msgid "Change type"
+msgstr "Cambiar tipo"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Instalaci贸n de SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Usar CD/DVDROM para la copia de respaldo"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Configuraciones predeterminadas de la impresora\n"
+"Felicidades, la instalaci贸n est谩 completa.\n"
+"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
"\n"
-"Deber铆a asegurarse que el tama帽o de p谩gina y el tipo de tinta/modo de "
-"impresi贸n (si corresponde) y tambi茅n la configuraci贸n de hardware de las "
-"impresoras l谩ser (memoria, unidad de d煤plex, bandejas adicionales) est谩n "
-"configurados correctamente. Note que una calidad de impresi贸n o resoluci贸n "
-"extremadamente alta puede ser bastante lenta."
+"Para obtener informaci贸n sobre correcciones disponibles para esta versi贸n\n"
+"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Hay informaci贸n disponible sobre c贸mo configurar su sistema en el cap铆tulo "
+"de\n"
+"configuraci贸n tras la instalaci贸n de la gu铆a de usuario oficial de Mandrake "
+"Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Transferencia de Firmware para HP LaserJet 1000"
+msgid "paranoid"
+msgstr "Paranoica"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Para poder imprimir con su impresora de inyecci贸n de tinta Lexmark y esta "
-"configuraci贸n, necesita los controladores de impresoras de inyecci贸n de "
-"tinta proporcionados por Lexmark (http://www.lexmark.com/). Haga clic en el "
-"v铆nculo \"Drivers\". Luego, seleccione su modelo y posteriormente \"Linux\" "
-"como sistema operativo. Los controladores vienen vienen como paquetes RPM o "
-"como scripts del shell con instalaci贸n gr谩fica interactiva. No necesita "
-"hacer esta configuraci贸n con las interfaces gr谩ficas. Cancele directamente "
-"tras el acuerdo de licencia. Luego imprima las p谩ginas de alineaci贸n del "
-"cabezal de impresi贸n con \"lexmarkmaintain\" y ajuste la configuraci贸n de la "
-"alineaci贸n de la cabeza con este programa."
+"Este comando tambi茅n se utiliza en el campo \"Comando de impresi贸n\" de los "
+"di谩logos de impresi贸n de muchas aplicaciones. Pero aqu铆 no se da el nombre "
+"del archivo porque el nombre del archivo a imprimir lo proporciona la "
+"aplicaci贸n.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Configuraci贸n de impresora de inyecci贸n de tinta Lexmark"
+msgid "Resolution"
+msgstr "Resoluci贸n"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Los controladores de impresi贸n de inkjet que proporciona Lexmark s贸lo "
-"admiten impresoras locales, no impresoras en m谩quinas remotas o servidores "
-"de impresi贸n. Por favor, conecte su impresora a un puerto local o "
-"config煤relo en la m谩quina a la que est谩 conectada."
+"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
+"servidor SMB (隆Note que puede ser diferente al nombre de hostTCP/IP del "
+"mismo!) y posiblemente la direcci贸n IP del servidor de impresi贸n, as铆 como "
+"el nombre del recurso compartido para la impresora que se quiere usar y "
+"cualquier otra informaci贸n del nombre de usuario, contrase帽a y grupo de "
+"trabajo que haga falta."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
-"utilizan un protocolo de comunicaci贸n muy especial y s贸lo funcionan cuando "
-"se conectan al primer puerto paralelo. Cuando su impresora est谩 conectada a "
-"otro puerto o a un servidor de impresi贸n, por favor con茅ctela al primer "
-"puerto paralelo antes de imprimir una p谩gina de prueba. De no ser as铆, la "
-"impresora no funcionar谩. El controlador ignorar谩 la configuraci贸n del tipo "
-"de conexi贸n."
+"Argumentos: (arg)\n"
+"\n"
+"Aceptar/Rechazar eco ICMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Configuraci贸n de impresora de windows OKI"
+msgid "reconfigure"
+msgstr "reconfigurar"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Si no se lista su impresora, elija una compatible (vea el manual de la "
-"misma) o una simliar."
+"Su tarjeta puede admitir aceleraci贸n 3D por hardware con XFree %s,\n"
+"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Por favor, verifique que Printerdrake hizo correctamente la detecci贸n "
-"autom谩tica del modelo de su impresora. Busque el modelo correcto en la lista "
-"si est谩 resaltado un modelo equivocado o \"Impresora en crudo\"."
+msgid "Xinetd Service"
+msgstr "Servicio Xinetd"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "驴Qu茅 modelo de impresora tiene?"
+msgid "access to network tools"
+msgstr "acceso a herramientas de red"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Selecci贸n del modelo de impresora"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Transferencia de Firmware para HP LaserJet 1000"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Leyendo base de datos de impresoras ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 le permite utilizar el 煤ltimo software para reproducir "
+"archivos de audio, editar y organizar sus im谩genes o fotos, y reproduzcir "
+"v铆deos"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Seleccionar el modelo manualmente"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Aqu铆 est谩 la lista de todas las impresoras detectadas autom谩ticamente."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "El modelo es correcto"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Ocurri贸 un error al instalar aboot, \n"
+"驴desea forzar la instalaci贸n incluso si ello implicara la destrucci贸n de la "
+"primera partici贸n?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake ha comparado el modelo que result贸 de la detecci贸n autom谩tica "
-"con los modelos listados en su base de datos de impresoras para encontrar la "
-"mejor coincidencia. Esta elecci贸n puede estar equivocada, especialmente si "
-"su impresora no est谩 listada en absoluto en la base de datos. Entonces, "
-"verifique si la elecci贸n es correcta y haga clic en \"El modelo es correcto"
-"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
-"forma tal que pueda elegir el modelo de su impresora manualmente en la "
-"pantalla siguiente.\n"
+"descripci贸n de las opciones:\n"
"\n"
-"Para su impresora Printerdrake ha encontrado:\n"
+" En este paso Drakbackup le permite cambiar:\n"
+"\n"
+" - El modo de compresi贸n:\n"
+" \n"
+" Si marca compresi贸n bzip2, comprimir谩 mejor sus datos\n"
+" que gzip (alrededor del 2-10 %%).\n"
+" Por defecto, esta opci贸n no est谩 marcada dado que este\n"
+" modo de compresi贸n necesita m谩s tiempo (100 veces m谩s)\n"
+" \n"
+" - El modo de actualizaci贸n:\n"
+"\n"
+" Esta opci贸n actualizar谩 su respaldo, pero no es\n"
+" realmente 煤til ya que necesita descomprimirlo\n"
+" antes que pueda actualizarlo.\n"
+" \n"
+" - el modo .backupignore:\n"
+"\n"
+" Al igual que cvs, Drakbackup ignorar谩 todas las referencias\n"
+" inclu铆das en los archivos .backupignore de cada directorio.\n"
+" ej: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "El modelo de su impresora"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Restaurar los archivos\n"
+"seleccionados"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Preparando base de datos de impresoras ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s existe, 驴borrarlo?\n"
+"\n"
+"Advertencia: Si ya realiz贸 este proceso probablemente deba\n"
+" purgar la entrada de authorized_keys en el servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Ubicaci贸n"
+msgid "Please fill or check the field below"
+msgstr "Por favor, complete o verifique el campo de abajo"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Descripci贸n"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "驴Desea guardar las modificaciones en /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Nombre de la impresora"
+msgid "Boot Protocol"
+msgstr "Protocolo de arranque"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
-"qu茅 rellenar los campos Descripci贸n ni Ubicaci贸n. Son comentarios para los "
-"usuarios."
+msgid "LVM-disks %s\n"
+msgstr "Discos-LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Ingrese nombre de la impresora y comentarios"
+msgid "The package %s is needed. Install it?"
+msgstr "Se necesita el paquete %s. 驴Desea instalarlo?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Haciendo que el puerto de la impresora est茅 disponible para CUPS..."
+msgid "On boot"
+msgstr "Al iniciar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Verificando dispositivo y configurando HPOJ..."
+msgid "Bus identification"
+msgstr "Identificaci贸n del bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-"Acceso a la tarjeta de memoria de fotos en su dispositivo multifunci贸n HP"
+msgid "Please make a backup of your data first"
+msgstr "Por favor, haga primero una copia de seguridad de sus datos"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Escaneo en su dispositivo multifunci贸n HP"
+msgid "Vatican"
+msgstr "Vaticano"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalando paquetes mtools..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Tiene m谩s de un disco r铆gido, 驴sobre cu谩l desea instalar Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalando paquetes SANE..."
+msgid "Boot ISO"
+msgstr "ISO de arranque"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instalando paquete HPOJ..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"驴Su impresora es un dispositivo multifunci贸n de HP o Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 con scanner, Sony IJP-V100), una HP "
-"PhotoSmart o una HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Quitar lista"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "隆Debe ingresar un comando!"
+msgid "A customizable environment"
+msgstr "Un entorno personalizable"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "L铆nea de comandos"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Aqu铆 puede especificar una l铆nea de comandos arbitraria en la cual deber铆a "
-"ponerse el trabajo de impresi贸n en vez de enviarse directamente a la "
-"impresora."
+msgid "Morocco"
+msgstr "Marruecos"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Enviar el trabajo a un comando"
+msgid "Which printer model do you have?"
+msgstr "驴Qu茅 modelo de impresora tiene?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Modelo detectado: %s %s"
+msgid "Add a new printer"
+msgstr "A帽adir una impresora nueva"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "隆Debe introducir un URI v谩lido!"
+msgid " All of your selected data have been "
+msgstr " Todos los datos seleccionados han sido "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI del dispositivo de impresi贸n"
+msgid "<-- Delete"
+msgstr "<-- Borrar"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Puede especificar directamente el URI para acceder a la impresora. El URI "
-"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
-"los sistemas de impresi贸n admiten URIs."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Puerto"
+msgid "cpu # "
+msgstr "cpu #"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Nombre de host o IP de la impresora"
+msgid "chunk size"
+msgstr "tama帽o de los bloques"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "隆El n煤mero de puerto debe ser un n煤mero entero!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "隆Falta el nombre de host o la IP de la impresora!"
+msgid "Problems installing package %s"
+msgstr "Problemas al instalar el paquete %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
-"nombre de host o direcci贸n IP de la impresora y, opcionalmente, el n煤mero de "
-"puerto (9100, por defecto). En servidores HP JetDirect el n煤mero de puerto "
-"por lo general es 9100, en otros servidores puede variar. Consulte el manual "
-"de su hardware."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Recibir谩 una alerta si la carga es mayor que este valor"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Elija una de las impresoras detectadas autom谩ticamente de la lista o ingrese "
-"el nombre del host o la IP y el n煤mero de puerto opcional (9100, por "
-"defecto) en los campos."
+"\n"
+"\n"
+"Para enviar un reporte de errores, haga clic sobre el bot贸n Reporte.\n"
+"Esto abrir谩 una ventana del navegador web en https://drakbug.mandrakesoft."
+"com\n"
+"donde encontrar谩 un formulario para completar. La informaci贸n que se\n"
+"muestra arriba ser谩 transferida a ese servidor\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opciones de la impresora por socket/TCP"
+msgid "Add a scanner manually"
+msgstr "A帽adir un esc谩ner manualmente"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", puerto %s"
+msgid "Reload partition table"
+msgstr "Volver a cargar la tabla de particiones"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\", puerto %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "S铆, deseo entrada autom谩tica con este (usuario, escritorio)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "Buscando en la red ..."
+msgid "Search for fonts in installed list"
+msgstr "Buscar tipograf铆as en la lista de instaladas"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Detecci贸n autom谩tica de impresoras"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "La red local no finaliz贸 con `.0', saliendo."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "隆No se encuentra la cola del servidor NCP!"
+msgid "Boot"
+msgstr "Arranque"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "隆No se encuentra el nombre del servidor NCP!"
+msgid "Tuner type:"
+msgstr "Tipo de sintonizador :"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Nombre de la cola de impresi贸n"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Ahora es el momento de seleccionar un sistema de impresi贸n para su\n"
+"computadora. Otros sistemas operativos pueden ofrecerle uno, pero Mandrake\n"
+"Linux le ofrece dos. Cada uno de los sistemas de impresi贸n es mejor para un\n"
+"tipo de configuraci贸n particular.\n"
+"\n"
+" * \"%s\" - \"print, don't queue\" (imprimir sin poner en cola) es la\n"
+"elecci贸n si Usted tiene una conexi贸n directa a su impresora y desea evitar\n"
+"el p谩nico de los papeles trabados, y no tiene impresora en red alguna\n"
+"(\"%s\" manejar谩 s贸lo casos de red muy simples y es algo lento cuando se\n"
+"utiliza con las redes) Se recomienda utilizar \"pdq\" si esta es su primer\n"
+"experiencia con GNU/Linux.\n"
+"\n"
+" * \"%s\" - \"Common Unix Printing System\" (Sistema de Impresi贸n Com煤n de\n"
+"Unix) es una elecci贸n excelente para imprimir en su impresora local o en\n"
+"una en la otra punta del planeta. Es simple de configurar y puede actuar\n"
+"como servidor o cliente para el sistema de impresi贸n antiguo \"lpd\", por\n"
+"lo que es compatible con sistemas operativos m谩s antiguos que todav铆a\n"
+"pueden necesitar servicios de impresi贸n. Si bien es bastante potente, la\n"
+"configuraci贸n b谩sica es tan simple como la de \"pdq\". Si necesita que\n"
+"emule a un servidor \"lpd\", debe activar el demonio \"cups-lpd\". \"%s\"\n"
+"incluye interfaces gr谩ficas para imprimir o elegir las opciones de la\n"
+"impresora y para administrar la impresora.\n"
+"\n"
+"Si hace una elecci贸n ahora y m谩s tarde encuentra que a Usted no le gusta su\n"
+"sistema de impresi贸n, puede cambiarlo ejecutando PrinterDrake desde el\n"
+"Centro de Control de Mandrake y haciendo clic sobre el bot贸n para expertos."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Servidor de impresi贸n"
+msgid "\"Menu\" key"
+msgstr "La tecla \"Men煤\""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
-"servidor de impresi贸n NetWare (隆Note que puede no ser el mismo que el nombre "
-"de la m谩quina en TCP/IP) as铆 como el nombre de la cola de impresi贸n que "
-"desea usar y el nombre de usuario y la contrase帽a apropiados."
+"\n"
+"\n"
+"Por favor, verifique que Printerdrake hizo correctamente la detecci贸n "
+"autom谩tica del modelo de su impresora. Busque el modelo correcto en la lista "
+"si est谩 resaltado un modelo equivocado o \"Impresora en crudo\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opciones de la impresora NetWare"
+msgid "Security Administrator:"
+msgstr "Administrador de seguridad:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Por favor, ingrese su nombre de usuario (login)"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"si se pone en s铆, verificar permisos de archivos en dirs. personales de "
+"usuarios."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Conecte su impresora a un servidor Linux y permita que su(s) m谩quina(s) "
-"Windows se conecten al mismo como un cliente.\n"
-"\n"
-"驴Realmente desea continuar configurando esta impresora como lo est谩 haciendo?"
+"No tiene ninguna conexi贸n a Internet.\n"
+"Primero debe crear una haciendo clic sobre 'Configurar'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Copiar tipograf铆as"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatizada"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "驴Desea probar la configuraci贸n?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Configure a su servidor Windows para que la impresi贸n est茅 disponible bajo "
-"el protocolo IPP y configure la impresi贸n desde esta m谩quina bajo el tipo de "
-"conexi贸n \"%s\" en PrinterDrake.\n"
-"\n"
+"La impresora \"%s\" se quit贸 satisfactoriamnete de Star Office/OpenOffice."
+"org."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Est谩 a punto de configurar la impresi贸n a una cuenta Windows con contrase帽a. "
-"Debido a una falla en la arquitectura del cliente Samba la contrase帽a se "
-"pone como texto plano en la l铆nea de comandos del cliente Samba que se usa "
-"para transmitir el trabajo de impresi贸n al servidor Windows. Por lo tanto, "
-"es posible que cada usuario de esta m谩quina vea la clave en pantalla "
-"ejecutando \"ps auxwww\".\n"
+"Est谩ndar: Este es el nivel est谩ndar recomendado para una computadora que se "
+"utilizar谩 para conectarse\n"
+"a la Internet como cliente.\n"
"\n"
-"Recomendamos utilizar alguna de las alternativas siguientes (en todos los "
-"casos tiene que asegurarse que s贸lo las m谩quinas de su red local tienen "
-"acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
+"Alta: Ya hay algunas restricciones, y m谩s verificaciones autom谩ticas se "
+"corren cada noche.\n"
"\n"
-"Usar una cuenta sin contrase帽a en su servidor Windows, por ej. la cuenta "
-"\"GUEST\" o una cuenta especial dedicada a la impresi贸n. No quite la "
-"protecci贸n con contrase帽a de una cuenta personal o de la cuenta del "
-"administrador.\n"
+"M谩s alta: La seguridad ahora es lo suficientemente alta para utilizar el "
+"sistema como un servidor que\n"
+"puede aceptar conexiones de muchos clientes. Si su m谩quina s贸lo es un "
+"cliente de la Internet,\n"
+"deber铆a elegir un nivel m谩s bajo.\n"
"\n"
-"Configure a su servidor Windows para que la impresi贸n est茅 disponible bajo "
-"el protocolo LPD y configure la impresi贸n desde esta m谩quina bajo el tipo de "
-"conexi贸n \"%s\" en PrinterDrake.\n"
+"Paranoico: Este es similar al nivel anterior, pero el sistema est谩 cerrado "
+"por completo y las\n"
+"caracter铆sticas de seguridad est谩n al m谩ximo.\n"
"\n"
+"Administrador de seguridad: Si se activa la opci贸n 'Alertas de seguridad', "
+"se enviar谩n las alertas\n"
+"de seguridad a este usuario (nombre o correo-e)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "隆ADVERTENCIA DE SEGURIDAD!"
+msgid "Save packages selection"
+msgstr "Guardar la selecci贸n de paquetes"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "隆No se encuentra el nombre del recurso compartido de Samba!"
+msgid "Remove the last item"
+msgstr "Borrar el 煤ltimo elemento"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "隆Debe indicar el nombre o la direcci贸n IP del servidor!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Lista de usuarios a restaurar (s贸lo importa la fecha m谩s reciente por "
+"usuario)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Detectada autom谩ticamente"
+msgid "No net boot images created!"
+msgstr "隆No se crearon im谩genes de arranque por red!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
+msgid "use pptp"
+msgstr "usar pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Nombre del recurso compartido"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Seleccione qu茅 servicios se deben iniciar autom谩ticamente al arrancar"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
+msgid "Learn how to use this printer"
+msgstr "Aprender como usar esta impresora"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "M谩quina del servidor SMB"
+msgid "Configure the network now"
+msgstr "Configurar la red ahora"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Si se detect贸 autom谩ticamente la impresora deseada, simplemente el铆jala de "
-"la lista y luego agregue el nombre de usuario, contrase帽a, y/o grupo de "
-"trabajo si es necesario."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Elija un sitio de r茅plica del cual obtener los paquetes"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
-"servidor SMB (隆Note que puede ser diferente al nombre de hostTCP/IP del "
-"mismo!) y posiblemente la direcci贸n IP del servidor de impresi贸n, as铆 como "
-"el nombre del recurso compartido para la impresora que se quiere usar y "
-"cualquier otra informaci贸n del nombre de usuario, contrase帽a y grupo de "
-"trabajo que haga falta."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Impresora \"%s\" en el servidor \"%s\""
+"El redimensionador de tama帽o de la FAT no puede gestionar su partici贸n, \n"
+"ocurri贸 el error siguiente: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", impresora \"%s\" en el servidor \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "驴A qu茅 sector desea desplazarla?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "隆Falta el nombre de la impresora remota!"
+msgid "Do you want to click on this button?"
+msgstr "驴Desea pulsar este bot贸n?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "隆Falta el nombre del host remoto!"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Nombre de la impresora remota"
+msgid "Manual configuration"
+msgstr "Configuraci贸n manual"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Nombre de host del servidor remoto"
+msgid "search"
+msgstr "buscar"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
-"del servidor de impresi贸n y el nombre de la impresora en ese servidor."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opciones de la impresora remota lpd"
+"Este paquete carga la definici贸n de teclado que se indica en\n"
+"/etc/sysconfig/keyboard. Puede ser configurado con el programa kbdconfig.\n"
+"Debe dejarse activo en la mayor铆a de las m谩quinas."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Configuraci贸n manual"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instalaci贸n del controlador de la pantalla)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "隆Debe elegir/ingresar una impresora o un dispositivo!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "El nombre de la m谩quina Zeroconf no debe contener un ."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
+"Syslog es el servicio a trav茅s del que varios demonios van a enviar\n"
+"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
+"de registro(log). Es una buena idea ejecutar siempre syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Por favor, elija el puerto al que est谩 conectado su impresora."
+msgid "Unknown/Others"
+msgstr "Desconocido/Otros"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Por favor, elija el puerto donde est谩 conectada su impresora o ingrese el "
-"nombre de un dispositivo o archivo en la l铆nea de entrada"
+msgid "No TV Card detected!"
+msgstr "隆No se detect贸 tarjeta de TV!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Opciones"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Por favor, elija la impresora a la cual deber铆an ir los trabajos de "
-"impresi贸n."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Por favor seleccione la impresora que desea configurar. La configuraci贸n de "
-"la impresora se har谩 de forma totalmente automatizada. Si su impresora no se "
-"detect贸 correctamente o si prefiere una configuraci贸n personalizada, active "
-"la \"Configuraci贸n manual\"."
+"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
+"utilizan un protocolo de comunicaci贸n muy especial y s贸lo funcionan cuando "
+"se conectan al primer puerto paralelo. Cuando su impresora est谩 conectada a "
+"otro puerto o a un servidor de impresi贸n, por favor con茅ctela al primer "
+"puerto paralelo antes de imprimir una p谩gina de prueba. De no ser as铆, la "
+"impresora no funcionar谩. El controlador ignorar谩 la configuraci贸n del tipo "
+"de conexi贸n."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Aqu铆 est谩 la lista de todas las impresoras detectadas autom谩ticamente."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Generaci贸n de la CPU (ej: 8 para PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "En este momento no hay alternativa posible"
+msgid "Auto-detected"
+msgstr "Detectada autom谩ticamente"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"La configuraci贸n de la impresora se har谩 de forma totalmente automatizada. "
-"Si su impresora no se detect贸 correctamente o si prefiere una configuraci贸n "
-"personalizada, active la \"Configuraci贸n manual\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Se detect贸 autom谩ticamente la impresora siguientes. "
+"Est谩 a punto de configurar su computadora para instalar un servidor PXE como "
+"servidor DHCP\n"
+"y un servidor TFTP para construir un servidor de instalaci贸n.\n"
+"Con esa caracter铆stica, otras computadoras en su red local se podr谩n "
+"instalar utilizando esta computadora como fuente.\n"
+"\n"
+"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
+"drakconnect antes de proceder.\n"
+"\n"
+"Nota: necesita un adaptador de red dedicado para configurar una red de 谩rea "
+"local (LAN)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Por favor, elija la impresora a la cual deber铆an ir los trabajos o ingrese "
-"el nombre de un dispositivo o archivo en la l铆nea de entrada"
+"隆No hay 1MB de espacio para bootstrap! La instalaci贸n continuar谩, pero para "
+"arrancar su sistema, necesitar谩 crear la partici贸n bootstrap en DiskDrake"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12459,1109 +12339,788 @@ msgstr ""
"Por favor, elija la impresora que desea configurar o ingrese el nombre de un "
"dispositivo o archivo en la l铆nea de entrada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativamente, puede especificar el nombre de un dispositivo o archivo en "
-"la l铆nea de entrada"
+msgid "Refuse"
+msgstr "Rechazar"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Si no es una de las que desea configurar, introduzca un nombre de "
-"dispositivo o archivo en la l铆nea de entrada"
+"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
+"el hardware nuevo/cambiado."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Impresoras disponibles"
+msgid "Remote Printers"
+msgstr "Impresoras remotas"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "隆No se encontr贸 impresora alguna!"
+msgid "Creating and formatting file %s"
+msgstr "Creando y formateando el archivo %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Debe introducir un dispositivo un un nombre de archivo"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "si se pone en s铆, verificar adiciones/remociones de archivos sgid."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"No se encontr贸 ninguna impresora local. Para instalar una manualmente, "
-"introduzca un nombre de dispositivo/nombre de archivo en la l铆nea de entrada "
-"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1陋 impresora USB: /dev/usb/lp0, 2陋 impresora USB: /dev/usb/lp1, ...)."
+"La HP LaserJet 1000 necesita que se transfiera su firmware luego de "
+"encenderla. Descargue el paquete de controladores Windows desde el sitio web "
+"de HP (el firmware del CD de la impresora no funciona) y extraiga el archivo "
+"del firmware descomprimiendo el archivo auto-extra铆ble .exe con el "
+"utilitario unzip y busque el archivo sihp1000.img. Copie este archivo en el "
+"directorio /etc/printer. All铆 el lo encontrar谩 autom谩ticamente el script que "
+"lo transfiere y lo transferir谩 cada vez que se conecte y encienda la "
+"impresora.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Impresora local"
+msgid "Choose an existing LVM to add to"
+msgstr "Elegir un LVM existente al que a帽adir"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "Impresora USB \\#%s"
+msgid "xfs restart"
+msgstr "Reiniciar XFS"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Impresora en puerto paralelo \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"La impresora \"%s\" ya existe,\n"
+"驴realmente desea sobre-escribir la configuraci贸n de la misma?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impresora \"%s\" en el servidor SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "no hay particiones disponibles"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Impresora de red \"%s\", puerto %s"
+msgid "Use the scanners on hosts: "
+msgstr "Usar los esc谩neres en los hosts:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Detectada %s"
+msgid "Unselected All"
+msgstr "Deseleccionar todas."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", impresora \"%s\" en el servidor SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Nombres de dominio"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", impresora de red \"%s\", puerto %s"
+msgid "Encryption key (again)"
+msgstr "Clave de cifrado (otra vez)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Enhorabuena, su impresora est谩 instalada y configurada.\n"
-"\n"
-"Puede imprimir usando el comando \"Imprimir\" de su aplicaci贸n (normalmente "
-"se encuentra en el men煤 \"Archivo\").\n"
-"\n"
-"Si quiere a帽adir, borrar o renombrar una impresora, o si quiere cambiar las "
-"opciones de configuraci贸n por defecto (bandeja de entrada de papel, calidad "
-"de impresi贸n, ...), seleccione \"Impresora\" en la secci贸n de \"Hardware\" "
-"del Centro de control de Mandrake."
+msgid "Samba share name missing!"
+msgstr "隆No se encuentra el nombre del recurso compartido de Samba!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Detectar autom谩ticamente las impersoras conectadas a m谩quinas que corren "
-"Microsoft Windows"
+msgid "True Type install done"
+msgstr "Instalaci贸n de True Type realizada"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Detectar autom谩ticamente las impresoras conectadas directamente a la red "
-"local"
+msgid "Detection in progress"
+msgstr "Detecci贸n en progreso"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Detectar autom谩ticamente las impresoras conectadas a esta m谩quina"
+msgid "Build Whole Kernel -->"
+msgstr "Construir el n煤cleo completo -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Bienvenido a %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Por favor, inserte el disquete de m贸dulos actualizados en la unidad %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"La siguiente impresora\n"
"\n"
-"Bienvenido al Asistente de configuraci贸n de Impresoras\n"
-"\n"
-"Este asistente lo ayudar谩 a instalar sus impresoras conectadas a esta "
-"computadora.\n"
-"\n"
-"Si tiene impresoras conectadas a esta m谩quina, por favor enci茅ndalas para "
-"que se puedan detectar autom谩ticamnte.\n"
-"\n"
-"Haga clic sobre \"Siguiente\" cuando est茅 listo, o sobre \"Cancelar\" si "
-"Usted no desea configurar sus impresoras ahora."
+"%s%s\n"
+"est谩 conectada directamente a su sistema"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Bienvenido al Asistente de configuraci贸n de Impresoras\n"
-"\n"
-"Este asistente lo ayudar谩 a instalar sus impresoras conectadas a esta "
-"computadora o conectadas directamente a la red.\n"
-"\n"
-"Si tiene impresoras conectadas a esta m谩quina, por favor enci茅ndalas para "
-"que se puedan detectar autom谩ticamnte. Tambi茅n deber铆an estar conectadas y "
-"encendidas sus impresoras de red.\n"
-"\n"
-"Note que la detecci贸n autom谩tica de las impresoras de red toma m谩s tiempo "
-"que s贸lo la detecci贸n autom谩tica de las impresoras conectadas a esta "
-"m谩quina. Entonces, desactive la detecci贸n autom谩tica de las impresoras de "
-"red si no lo necesita.\n"
-"\n"
-"Haga clic sobre \"Siguiente\" cuando est茅 listo, o sobre \"Cancelar\" si "
-"Usted no desea configurar sus impresoras ahora."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Compartir impresoras en hosts/redes: "
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Bienvenido al Asistente de configuraci贸n de la impresora\n"
-"\n"
-"Este asistente lo ayudar谩 a instalar sus impresoras conectadas a esta "
-"computadora, conectadas directamente a la red o a una m谩quina Windows "
-"remota.\n"
-"\n"
-"Si tiene impresoras conectadas a esta m谩quina, por favor enci茅ndalas para "
-"que se puedan detectar autom谩ticamente. Tambi茅n deben estar conectadas y "
-"encendidas sus impresoras de red y sus m谩quinas Windows.\n"
-"\n"
-"Note que la detecci贸n autom谩tica de impresoras en la red toma m谩s tiempo que "
-"s贸lo detectar las impresoras conectadas a esta m谩quina. Entonces, desactive "
-"la detecci贸n autom谩tica de impresoras de red o en m谩quinas Windows cuando no "
-"la necesita.\n"
-"\n"
-"Haga clic sobre \"Siguiente\" cuando est茅 listo, o sobre \"Cancelar\" si "
-"Usted no desea configurar sus impresoras ahora."
+"El comando \"%s\" tambi茅n permite modificar las opciones de configuraci贸n "
+"para un trabajo de impresi贸n determinado. Simplemente, a帽ada las "
+"configuraciones deseadas a la l铆nea de comando, por ejemplo \"%s <archivo>"
+"\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Bienvenido al asistente de configuraci贸n de la impresora\n"
-"\n"
-"Este asistente le permite instalar impresoras locales o remotas para usarlas "
-"desde esta m谩quina y tambi茅n desde otras m谩quinas de la red.\n"
-"\n"
-"Se le solicitar谩 la informaci贸n necesaria para configurar la impresora y "
-"darle acceso a los controladores de todas las impresoras disponibles, "
-"opciones del controlador y tipos de conexi贸n de impresoras."
+"En algunos casos, el controlador de %s necesita informaci贸n extra\n"
+"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
+"驴Desea especificar informaci贸n extra para el controlador o dejar que el "
+"mismo\n"
+"pruebe su equipo y encuentre la informaci贸n que necesita? A veces,\n"
+"el probar el equipo puede provocar que 茅ste se cuelgue, pero no deber铆a\n"
+"causar ning煤n da帽o."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "No es el CD correcto. El disco est谩 etiquetado %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"隆Bienvenido a la herramienta para compartir la conexi贸n a Internet!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrak no pudo determinar qu茅 modelo es su impresora %s. Por favor, "
-"escoja el modelo correcto de la lista."
+"Haga click sobre Configurar para lanzar el asistente de configuraci贸n."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " en "
+msgid "Searching for new printers..."
+msgstr "Buscando impresoras nuevas..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belice"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Configurando impresora..."
+msgid " (multi-session)"
+msgstr " (multi-sesi贸n)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Buscando impresoras nuevas..."
+msgid "Kernel Boot Timeout"
+msgstr "Tiempo de espera de arranque del n煤cleo"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NOTA: Dependiendo del modelo de la impresora y del sistema de impresi贸n, se "
-"instalar谩n hasta %d MB de software adicional."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "驴Est谩 seguro que desea configurar la impresi贸n en esta m谩quina?\n"
+"Su tarjeta puede admitir aceleraci贸n 3D pero s贸lo con XFree %s.\n"
+"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "驴Desea habilitar la impresi贸n en las impresoras mencionadas arriba?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr ""
+"El asistente de particionamiento de DrakX encontr贸 las siguientes soluciones:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "驴Desea habilitar la impresi贸n en las impresoras en la red local?\n"
+msgid "Hungarian"
+msgstr "H煤ngaro"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"驴Desea habilitar la impresi贸n en las impresoras mencionadas arriba o en las "
-"impresoras en la red local?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"(Debe asegurarse que todas sus impresoras est谩n conectadas y encendidas).\n"
+"Seleccione su proveedor.\n"
+" Si no est谩 en la lista, elija No listado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "No se encontraron impresoras conectadas directamente a su m谩quina"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Sincronizaci贸n autom谩tica de hora (usando NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Hay %d impresoras desconocidas conectadas directamente a su sistema"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Hay una impresaora desconocida conectada directamente a su sistema"
+msgid "LDAP Server"
+msgstr "Servidor LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"La siguiente impresora\n"
-"\n"
-"%s%s\n"
-"est谩 conectada directamente a su sistema"
+"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
+"de red o m贸dems en ordenadores port谩tiles. No se iniciar谩 salvo que\n"
+"est茅 configurado, por lo que no es un problema tenerlo instalado\n"
+"en m谩quinas que no lo necesiten."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Las siguientes impresoras\n"
-"\n"
-"%s%s\n"
-"est谩n conectadas directamente a su sistema"
+msgid "Choose your country"
+msgstr "Elija su pa铆s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Las siguientes impresoras\n"
"\n"
-"%s%s\n"
-"est谩n conectadas directamente a su sistema"
+"- Archivos del sistema:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "y %d impresoras desconocidas est谩n "
+msgid "Standalone Tools"
+msgstr "Herramientas 'standalone'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr "y una impresora desconocida est谩 "
+msgid "Where"
+msgstr "D贸nde"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "Verificando su sistema..."
+msgid "but not matching"
+msgstr "pero no hay coincidencias"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr "Reiniciando CUPS..."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Aqu铆 puede seleccionar un controlador alternativo (OSS o ALSA) para su "
+"tarjeta de sonido (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Este servidor ya est谩 en la lista, no se puede volver a a帽adir.\n"
+msgid "Configuring PCMCIA cards..."
+msgstr "Configurando tarjetas PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Ejemplos de IP correctas:\n"
+msgid "kdesu missing"
+msgstr "no se encuentra kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "La IP ingresada no es correcta.\n"
+msgid "Encryption key"
+msgstr "Clave de cifrado"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "隆Falta la IP del servidor!"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Si no se proporciona un puerto, se tomar谩 631 como predeterminado."
+msgid "Christmas Island"
+msgstr "Isla Navidad"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
-"Ingrese la direcci贸n IP y el puerto del host cuyas impresoras desea utilizar."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Accediendo impresoras en servidores CUPS remotos"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove selected server"
-msgstr "Quitar servidor seleccionado"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Edit selected server"
-msgstr "Editar servidor seleccionado"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add server"
-msgstr "A帽adir servidor"
+"Fall贸 la instalaci贸n del cargador de arranque. Ocurri贸 el siguiente error:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"A帽ada aqu铆 los servidores CUPS cuyas impresoras desea usar. S贸lo necesita "
-"hacer esto si los servidores no difunden la informaci贸n de sus impresoras en "
-"la red local."
+msgid "EIDE/SCSI channel"
+msgstr "canal EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "Direcci贸n IP del host/red:"
+msgid "Set this printer as the default"
+msgstr "Poner esta impresora como predeterminada"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Este host/red ya est谩 en la lista, no se puede volver a a帽adir.\n"
+msgid "partition %s"
+msgstr "partici贸n %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "La IP del host/red ingresada no es correcta.\n"
+msgid "Paranoid"
+msgstr "Paranoica"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Falta direcci贸n IP del host/red."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Elija la red o host donde se deber铆an hacer disponibles las impresoras "
-"locales:"
+msgid "<-- Del User"
+msgstr "<-- Borrar usuario"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Compartir impresoras locales"
+msgid "Location on the bus"
+msgstr "Ubicaci贸n en el bus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Quitar host/red seleccionada."
+msgid "No printer found!"
+msgstr "隆No se encontr贸 impresora alguna!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Editar host/red seleccionada"
+msgid "the vendor name of the device"
+msgstr "el nombre del fabricante del dispositivo"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "A帽adir host/red"
+msgid "Erase entire disk"
+msgstr "Borrar el disco entero"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Estas son las m谩quinas y redes en las cuales deber铆a(n) estar disponible(s) "
-"la(s) impresora(s) conectada(s) localmente:"
+msgid " (Default)"
+msgstr " (Por defecto)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Cuando se activa esta opci贸n, cada vez que se inicia CUPS se asegura de "
-"manera autom谩tica que\n"
-"\n"
-"- si est谩 instalado LPD/LPRng, CUPS no sobreescribir谩 /etc/printcap\n"
-"\n"
-"- si falta /etc/cups/cupsd.conf, ser谩 creado\n"
-"\n"
-"- cuando la informaci贸n de la impresora se difunde, no contiene \"localhost"
-"\" como nombre del servidor.\n"
+"Argumentos: ()\n"
"\n"
-"Si alguna de esas medidas lo pone en problemas, apague esta opci贸n, pero "
-"entonces, tiene que ocuparse de estos puntos."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Correcci贸n autom谩tica de la configuraci贸n de CUPS"
+"Si SERVER_LEVEL (o SECURE_LEVEL si no est谩) es mayor que 3 en\n"
+"/etc/security/msec/security.conf, crea el symlink /etc/security/msec/server\n"
+"para que apunte a /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/"
+"msec/server\n"
+"lo utiliza chkconfig --add para decidir a帽adir un servicio si est谩 presente "
+"en el archivo\n"
+"durante la instalaci贸n de paquetes."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Habilitar esto le permite imprimir archivos de texto plano en idioma "
-"japon茅s. S贸lo use esta funci贸n y realmente desea imprimir texto en japon茅s, "
-"si se activa Usted no puede imprimir m谩s caracteres acentuados en "
-"tipograf铆as latinas y no podr谩 ajustar los m谩rgenes, el tama帽o de letra, "
-"etc. Este ajuste s贸lo afecta a las impresoras definidas en esta m谩quina. Si "
-"desea imprimir texto en una impresora ubicada en un m谩quina remota, debe "
-"activar esta funci贸n en dicha m谩quina remota."
+msgid "Automatic reconfiguration"
+msgstr "Volver a configurar autom谩ticamente"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Modo de impresi贸n de texto japon茅s"
+msgid "Receiving Speed:"
+msgstr "Velocidad de recepci贸n:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Para acceder a impresoras en servidores CUPS remotos en su red local, s贸lo "
-"necesita habilitar la opci贸n \"Encontrar autom谩ticamente impresoras "
-"disponibles en m谩quinas remotas\"; los servidores CUPS informan a la m谩quina "
-"autom谩ticamente sobre sus impresoras. Todas las impresoras que su m谩quina "
-"conoce corrientemente se listan en la secci贸n \"Impresoras remotas\" en la "
-"ventana principal de Printerdrake. Si sus servidores CUPS no est谩n en su red "
-"local, tiene que ingresar aqu铆 las direcciones IP y opcionalmente los "
-"n煤meros de puerto para obtener la informaci贸n de las impresoras de los "
-"servidores."
+msgid "Turks and Caicos Islands"
+msgstr "Islas Turks y Caicos"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Ninguno"
+msgid "permissions"
+msgstr "permisos"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Servidores CUPS adicionales:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Ninguna m谩quina remota"
+msgid "<- Previous"
+msgstr "<- Anterior"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Configuraci贸n personalizada"
+msgid "Internet Connection Sharing configuration"
+msgstr "Configuraci贸n de la conexi贸n compartida a Internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Compartir impresoras en hosts/redes: "
+msgid "Toggle between flat and group sorted"
+msgstr "Cambiar entre vista plana y ordenada por grupos"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Encontrar autom谩ticamente impresoras disponibles en m谩quinas remotas"
+msgid "Themes"
+msgstr "Temas"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-"Las impresoras en esta m谩quina est谩n disponibles para otras computadoras"
+msgid "Options: %s"
+msgstr "Opciones: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Tambi茅n puede decidir aqu铆 si las impresoras en las m谩quinas remotas "
-"deber铆an estar disponibles autom谩ticamente en esta m谩quina."
+"En este momento est谩 usando %s como gestor de arranque.\n"
+"Haga click sobre configurar para lanzar el asistente de configuraci贸n."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Aqu铆 puede elegir si las impresoras conectadas a esta m谩quina deber铆an poder "
-"accederse desde m谩quinas remotas y desde qu茅 m谩quinas remotas."
+msgid "OKI winprinter configuration"
+msgstr "Configuraci贸n de impresora de windows OKI"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "Configuraci贸n de impresora CUPS"
+msgid "Saint Helena"
+msgstr "Santa Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
-"Detecci贸n autom谩tica de impresora (Impresoras locales, TCP/Socket, y SMB)"
+msgid "Security Level"
+msgstr "Nivel de seguridad"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Algunas de las etapas no fueron completadas.\n"
"\n"
-"Aqu铆 no tiene que configurar las impresoras en los servidores CUPS remotos; "
-"las mismas se detectar谩n autom谩ticamente."
+"驴Realmente desea salir ahora?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "驴C贸mo est谩 conectada la impresora?"
+msgid "Sudan"
+msgstr "Sud谩n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Seleccione la conexi贸n de la impresora"
+msgid "Polish (qwertz layout)"
+msgstr "Polaco (distribuci贸n qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"La HP LaserJet 1000 necesita que se transfiera su firmware luego de "
-"encenderla. Descargue el paquete de controladores Windows desde el sitio web "
-"de HP (el firmware del CD de la impresora no funciona) y extraiga el archivo "
-"del firmware descomprimiendo el archivo auto-extra铆ble .exe con el "
-"utilitario unzip y busque el archivo sihp1000.img. Copie este archivo en el "
-"directorio /etc/printer. All铆 el lo encontrar谩 autom谩ticamente el script que "
-"lo transfiere y lo transferir谩 cada vez que se conecte y encienda la "
-"impresora.\n"
+msgid "Syria"
+msgstr "Siria"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumentos: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Configurar la umask de usuario."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumentos: (val)\n"
+"隆Bienvenido a %s, el selector de SO de arranque!\n"
"\n"
-"Ajustar el timeout del shell. Un valor de cero significa sin timeout."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Elija un sistema operativo de la lista o espere %d segundos\n"
+"para que arranque el sistema predeterminado.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumentos: (size)\n"
-"Ajustar el tama帽o de la historia de comandos. Un valor de -1 significa "
-"ilimitada."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "si se pone en s铆, verificar adiciones/remociones de archivos sgid."
+msgid "Portuguese"
+msgstr "Portugu茅s"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "si se pone en s铆, verificar puertos abiertos."
+msgid "Loopback file name: "
+msgstr "Nombre del archivo de loopback: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"si est谩 activo, enviar el correo de reporte a esta direcci贸n, caso contrario "
-"a root."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Las direcciones del servidor DNS deber铆an estar en el formato 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "si se pone en s铆, reportar resultado de verificaci贸n por correo-e."
+msgid "Serbia"
+msgstr "Serbia"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"si se pone en s铆, verificar archivos/directorios que todos pueden escribir."
+msgid "Newzealand"
+msgstr "Nueva Zelanda"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "si se pone en s铆, reportar resultados de verificaci贸n en tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Este directorio deber铆a permanecer dentro del sistema de archivos ra铆z"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-"si se pone en s铆, correr algunas pruebas contra la base de datos de rpm."
+msgid "CapsLock key"
+msgstr "Tecla CapsLock"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"si se pone en s铆, verificar si los dispositivos de red est谩n en modo "
-"promiscuo."
+msgid "Install bootloader"
+msgstr "Cargador de arranque"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "si se pone en s铆, ejecutar verificaciones chkrootkit."
+msgid "Select the memory size of your graphics card"
+msgstr "Seleccione la cantidad de memoria de su tarjeta gr谩fica"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"si se pone en s铆, verificar permisos de archivos en dirs. personales de "
-"usuarios."
+"[OPCIONES]\n"
+"Aplicaci贸n de monitoreo y conexi贸n de Internet y redes\n"
+"\n"
+"--defaultintf interfaz : mostar esta interfaz por defecto\n"
+"--connect : conectar a la Internet si no est谩 conectado\n"
+"--disconnect : desconectar de la Internet si est谩 conectado\n"
+"--force : utilizado con (dis)connect: forzar (des)conexi贸n.\n"
+"--status : devuelve 1 si est谩 conectado, 0 en caso "
+"contrario.\n"
+"--quiet : no ser interactivo. A utilizar con (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"si se pone en s铆, verificar adiciones/remociones de archivos suid root."
+msgid "Dynamic IP Address Pool:"
+msgstr "Disponibilidad de direcciones IP din谩micas:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "si se pone en s铆, reportar resultado de verificaci贸n en syslog."
+msgid "LVM name?"
+msgstr "驴nombre de LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"si se pone en s铆, verificar contrase帽a vac铆a, sin contrase帽a en /etc/shadow "
-"y por usuarios con el id 0 que no sean root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Se quitaron algunos dispositivos en la clase de hardware \"%s\":\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "si se pone en s铆, ejecutar las verificaciones de seguridad diarias."
+msgid "Found %s %s interfaces"
+msgstr "%s interfaces %s encontradas"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "si se pone en s铆, verificar suma de los archivos suid/sgid."
+msgid "sticky-bit"
+msgstr "bit pegajoso"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "si se pone en s铆, verificar contrase帽a vac铆a en /etc/shadow."
+msgid "Post Install"
+msgstr "Post-instalaci贸n"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "si se pone en s铆, reportar archivos sin due帽o."
+msgid "The internal domain name"
+msgstr "El nombre de dominio interno"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Argumentos: (umask)\n"
-"\n"
-"Configurar la umask de root."
+msgid "Card IRQ"
+msgstr "IRQ de la tarjeta"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Argumentos: (length, ndigits=0, nupper=0)\n"
+"Argumentos: (umask)\n"
"\n"
-"Configurar la longitud m铆nima de contrase帽a y la cantidad m铆nima de d铆gitos "
-"y cantidad m铆nima de letras may煤sculas."
+"Configurar la umask de usuario."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Configurar la longitud de la historia de contrase帽as para prevenir "
-"reutilizaci贸n de contrase帽as."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumentos: (max, inactive=-1)\n"
-"\n"
-"Configurar edad de contrase帽as en \\fImax\\fP d铆as y demorar el cambio a "
-"\\fIinactive\\fP."
+"Aplicaci贸n de importaci贸n y monitoreo de tipograf铆as\n"
+"--windows_import : importar desde todas las particiones Windows "
+"disponibles.\n"
+"--xls_fonts : mostrar todas las tipograf铆as que ya existen en xls\n"
+"--strong : verificaci贸n fuerte de las tipograf铆as.\n"
+"--install : aceptar cualquier tipograf铆a o directorio de "
+"tipograf铆as.\n"
+"--uninstall : desinstalar cualquier tipograf铆a o directorio de tipog.\n"
+"--replace : reemplazar las tipograf铆as si ya existen.\n"
+"--application : 0 ninguna aplicaci贸n.\n"
+" : 1 todas las aplicaciones soportadas disponibles.\n"
+" : nombre_de_aplicaci贸n como por ej. so para staroffice\n"
+" y gs para ghostscript."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumentos: (name)\n"
-"\n"
-"A帽adir el nombre como una excepci贸n al manejo de edad de contrase帽as por "
-"msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr "[--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/Deshabilitar sulogin(8) en nivel de usuario 煤nico."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Activar/desactivar verificaciones diarias de seguridad."
+msgid "LILO with text menu"
+msgstr "LILO con men煤 de texto"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Activar/desactivar verificaciones de promiscuidad de tarjetas Ethernet."
+msgid "Everything (no firewall)"
+msgstr "Todo (sin cortafuegos)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Usar contrase帽a para autenticar usuarios."
+msgid "You must specify a kernel image"
+msgstr "Debe especificar una imagen del n煤cleo"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir su s贸lo a miembros del grupo wheel o permitir su a cualquier "
-"usuario."
+msgid ", multi-function device on USB"
+msgstr ", dispositivo multi-funci贸n en USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar verificaci贸n horaria de seguridad de msec."
+msgid "Do"
+msgstr "Hacer"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar registro de paquetes IPv4 extra帽os."
+"Contactando con el sitio de r茅plica para obtener la lista de los paquetes "
+"disponibles..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar libsafe si es que se encuentra en el sistema."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituano AZERTY (antiguo)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar protecci贸n contra enga帽o de IP."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasile帽o (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumentos: (arg, alert=1)\n"
-"\n"
-"Habilitar/deshabilitar protecci贸n de enga帽o de resoluci贸n de nombres. Si\n"
-"\\fIalert\\fP es verdadero, tambi茅n reportar a syslog."
+msgid "IP address of host/network:"
+msgstr "Direcci贸n IP del host/red:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumentos: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Habilitar/deshabilitar reportes de syslog en consola 12. \\fIexpr\\fP es la\n"
-"expresi贸n que describe que registrar (vea syslog.conf(5) para m谩s detalles) "
-"y\n"
-"dev el dispositivo donde reportar el registro."
+"coordenada y del 谩ngulo superior\n"
+"izquierdo de la barra de progreso"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Habilitar/deshabilitar crontab y at para usuarios. Poner los permitidos en /"
-"etc/cron y /etc/at.allow\n"
-"(ver man at(1) y crontab(1))."
+msgid "System installation"
+msgstr "Instalaci贸n del sistema"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumentos: ()\n"
-"\n"
-"Si SERVER_LEVEL (o SECURE_LEVEL si no est谩) es mayor que 3 en\n"
-"/etc/security/msec/security.conf, crea el symlink /etc/security/msec/server\n"
-"para que apunte a /etc/security/msec/server.<SERVER_LEVEL>. /etc/security/"
-"msec/server\n"
-"lo utiliza chkconfig --add para decidir a帽adir un servicio si est谩 presente "
-"en el archivo\n"
-"durante la instalaci贸n de paquetes."
+msgid "Saint Vincent and the Grenadines"
+msgstr "San Vicente y las Granadinas"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Autorizar todos los servicios controlados por tcp_wrappers (ver hosts.deny"
-"(5)) si \\fIarg\\fP = ALL. S贸lo los locales\n"
-"si \\fIarg\\fP = LOCAL y ninguno si \\fIarg\\fP = NONE. Para autorizar los "
-"servicios que necesita, use /etc/hosts.allow\n"
-"(ver hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Archivo/_Abrir"
#: ../../security/help.pm:1
#, c-format
@@ -13576,1089 +13135,840 @@ msgstr ""
"El argumento especifica si los clientes est谩n autorizados a conectar\n"
"al servidor X en el puerto TCP 6000 o no."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumentos: (arg, listen_tcp=None)\n"
-"\n"
-"Permitir/Prohibir conexiones X. El primer argumento especifica qu茅 se hace\n"
-"en el lado cliente: ALL (permitir todas las conexiones), LOCAL (s贸lo\n"
-"conexiones locales) y NONE (ninguna conexi贸n)"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir la lista de usuarios del sistema en administradores de "
-"conexi贸n (kdm y gdm)"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir conexi贸n directa de root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir conexi贸n remota de root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir reinicio por parte del usuario de la consola."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Si \\fIarg\\fP = ALL permitir que existan /etc/issue y /etc/issue.net. Si "
-"\\fIarg\\fP = NONE no se\n"
-"permiten \"issues\", de lo contrario s贸lo se permite /etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "Ubicaci贸n del archivo auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Permitir/Prohibir conexi贸n autom谩tica."
+msgid "Open Firmware Delay"
+msgstr "Demora de Open firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Aceptar/Rechazar eco ICMP."
+msgid "Hungary"
+msgstr "Hungr铆a"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Aceptar/Rechazar eco ICMP difundido."
+msgid "Total progess"
+msgstr "Progreso total"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumentos: (arg)\n"
-"\n"
-"Aceptar/Rechazar mensajes de error IPv4 simulados."
+msgid "Color configuration"
+msgstr "Configuraci贸n del color"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrador de la seguridad (login o correo electr贸nico)"
+msgid "New Zealand"
+msgstr "Nueva Zelanda"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Una biblioteca que le defiende ante ataques de desbordamiento de b煤fer y "
-"ataques con cadenas de formato."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Utilizar libsafe para los servidores"
+"Ya hay algunas restricciones, y todas las noches se corren m谩s "
+"verificaciones autom谩ticas."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security level"
-msgstr "Nivel de seguridad"
+msgid "please choose the date to restore"
+msgstr "Por favor, elija la fecha para restaurar"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Por favor, elija el nivel de seguridad deseado"
+msgid "Switching from ext2 to ext3"
+msgstr "Cambiando de ext2 a ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opciones b谩sicas de DrakSec"
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Basado en el nivel anterior, pero el sistema est谩 completamente cerrado.\n"
-"Las caracter铆sticas de seguridad est谩n al m谩ximo."
+msgid "Netherlands Antilles"
+msgstr "Antillas Holandesas"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Con este nivel de seguridad, es posible utilizar el sistema como un "
-"servidor.\n"
-"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
-"servidor que acepte conexiones de m煤ltiples clientes. Nota: si su m谩quina "
-"s贸lo es un cliente en la Internet, mejor deber铆a elegir un nivel inferior."
+msgid "Browse to new restore repository."
+msgstr "Examinar un repositorio de restauraci贸n nuevo."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Ya hay algunas restricciones, y todas las noches se corren m谩s "
-"verificaciones autom谩ticas."
+"\n"
+"Bienvenido al asistente de configuraci贸n de la impresora\n"
+"\n"
+"Este asistente le permite instalar impresoras locales o remotas para usarlas "
+"desde esta m谩quina y tambi茅n desde otras m谩quinas de la red.\n"
+"\n"
+"Se le solicitar谩 la informaci贸n necesaria para configurar la impresora y "
+"darle acceso a los controladores de todas las impresoras disponibles, "
+"opciones del controlador y tipos de conexi贸n de impresoras."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"脡ste es el nivel de seguridad est谩ndar recomendado para una m谩quina que se\n"
-"utilizar谩 para conectarse a la Internet como cliente."
+msgid "and %d unknown printers"
+msgstr "y %d impresoras desconocidas est谩n "
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Las contrase帽as est谩n activadas, pero tampoco se recomienda usar este\n"
-"nivel para un ordenador conectado a una red."
+"Los chips Intel Pentium fabricados primero tienen un bug en el procesador de "
+"coma flotante que no lograba la precisi贸n deseada cuando se realizaba una "
+"divisi贸n de coma flotante (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Este nivel se debe usar con mucho cuidado. Hace su sistema m谩s simple de\n"
-"usar, pero tambi茅n mucho m谩s vulnerable: no debe usarse para una m谩quina\n"
-"conectada en red con otras o a Internet. No hay contrase帽as de acceso."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoica"
+"No se encontr贸 tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
+"siguiente."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "M谩s alta"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Alta"
+msgid "Please give a user name"
+msgstr "Introduzca el nombre de usuario"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Pobre"
+msgid "Enable CD Boot?"
+msgstr "驴Habilitar el arranque desde CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bienvenidos, crackers"
+msgid " enter `void' for void entry"
+msgstr "ingrese `void' para una entrada vac铆a"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Abra de nuevo una sesi贸n %s para activar los cambios"
+msgid "on Hard Drive"
+msgstr "en disco r铆gido"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor salga de la sesi贸n y luego pulse Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "Conexi贸n por winmodem"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow y /etc/hosts.deny ya configurados - no se cambiaron"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"Enhorabuena, su impresora est谩 instalada y configurada.\n"
+"\n"
+"Puede imprimir usando el comando \"Imprimir\" de su aplicaci贸n (normalmente "
+"se encuentra en el men煤 \"Archivo\").\n"
+"\n"
+"Si quiere a帽adir, borrar o renombrar una impresora, o si quiere cambiar las "
+"opciones de configuraci贸n por defecto (bandeja de entrada de papel, calidad "
+"de impresi贸n, ...), seleccione \"Impresora\" en la secci贸n de \"Hardware\" "
+"del Centro de control de Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "隆Primero debe crear /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Configurar la longitud de la historia de contrase帽as para prevenir "
+"reutilizaci贸n de contrase帽as."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "隆Ocurri贸 algo malo! - 驴Est谩 instalado mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "隆Ahora, puede ejecutar xawtv (!bajo X Window!)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "La imagen ISO Etherboot es %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Espacio de intercambio insuficiente para completar la instalaci贸n, a帽ada un "
+"poco m谩s"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "隆Ninguna disquetera disponible!"
+msgid "%s on %s"
+msgstr "%s en %s"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ya se puede quitar el disquete"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
+"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
+"horario que Usted seleccion贸. Sin embargo, es posible desactivar esto\n"
+"quitando la marca de la casilla \"%s\", lo que har谩 que GNU/Linux sepa que\n"
+"el reloj del sistema y el reloj de hardware est谩n en el mismo huso horario.\n"
+"Esto es 煤til cuando la m谩quina tambi茅n alberga otro sistema operativo como\n"
+"Windows.\n"
+"\n"
+"La opci贸n \"%s\" regular谩 autom谩ticamente el reloj conect谩ndose a un\n"
+"servidor remoto de la hora en la Internet. Para que esta caracter铆stica\n"
+"funcione debe tener una conexi贸n con la Internet funcionando. En realidad,\n"
+"esta opci贸n instala un servidor de la hora que puede ser utilizado por\n"
+"otras m谩quinas en su red local."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "隆No se pudo acceder al disquete!"
+msgid "Which is your timezone?"
+msgstr "驴Cu谩l es su huso horario?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Por favor, inserte un disquete:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Escribir configuraci贸n"
+msgid "The system is now connected to the Internet."
+msgstr "Ahora el sistema est谩 conectado a la Internet."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Disponibilidad de direcciones IP din谩micas:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Islas Georgia del Sur y Sandwich del Sur"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"La mayor铆a de estos valores se tomaron\n"
-"de su sistema actual.\n"
-"Los puede modificar si es necesario."
+msgid "Japan (broadcast)"
+msgstr "Jap贸n (difusi贸n)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Configuraci贸n del servidor dhcpd"
+msgid "Mozambique"
+msgstr "Mozambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Fin de rango IP:"
+msgid "Icon"
+msgstr "Icono"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "Comienzo de rango IP:"
+msgid "Please choose what you want to backup"
+msgstr "Por favor, elija qu茅 desea respaldar"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Servidores de nombres:"
+msgid "256 colors (8 bits)"
+msgstr "256 colores (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Nombre de dominio:"
+msgid "Read-write"
+msgstr "Lectura/Escritura"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Direcci贸n de difusi贸n:"
+msgid "Size: %s\n"
+msgstr "Tama帽o: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "M谩scara de subred:"
+msgid "Hostname: "
+msgstr "Nombre de la m谩quina: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Routers:"
+msgid "Chunk size %s\n"
+msgstr "Tama帽o de los bloques %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "M谩scara de red:"
+msgid "Build the future of Linux!"
+msgstr "隆Construya el futuro de Linux!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Subred:"
+msgid "Local Printer"
+msgstr "Impresora local"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Debe reiniciar el Display Manager para que los cambios tengan efecto. \n"
-"(service dm restart - en la consola)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Configuraci贸n de dhcpd..."
+" Copyright (C) 2001-2002 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Borrar cliente"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=miarchivo] [--word=mipalabra] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Editar cliente"
+msgid "ADSL connection"
+msgstr "Conexi贸n ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "A帽adir cliente -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
+"Sin configuraci贸n, por favor haga clic sobre el Asistente o Avanzado.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Permitir Clientes livianos"
+msgid "Error!"
+msgstr "隆Error!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Cliente liviano"
+msgid "cable connection detected"
+msgstr "detectada conexi贸n por cable"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "隆No se crearon im谩genes de arranque por red!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Permiso denegado transfiriendo %s a %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "tipo: %s"
+msgid "/_Report Bug"
+msgstr "/_Reportar un error"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Borrar usuario"
+msgid "Resize"
+msgstr "Redimensionar"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "A帽adir usuario -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+msgid "Please enter the device name to use for backup"
msgstr ""
-"!!! Indica que la contrase帽a en la base de datos del sistema es diferente\n"
-"de la de la base de datos del Servidor de Terminales.\n"
-"Quite/agregue el usuario al Servidor de Terminales para permitir conexi贸n."
+"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Borrar todos los NBI"
+msgid "Resolution: %s\n"
+msgstr "Resoluci贸n: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Borrar"
+msgid "matching"
+msgstr "coincidencia"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Esto tomar谩 algunos minutos."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"No se puede acceder a los m贸dulos del n煤cleo correspondientes a su n煤cleo "
+"(no se encuentra el archivo %s), esto generalmente significa que su disquete "
+"de arranque no contiene un n煤cleo de misma versi贸n que el soporte de "
+"instalaci贸n (haga un nuevo disquete de arranque por favor)"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Construir todos los n煤cleos -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
+"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "隆No se seleccion贸 NIC!"
+msgid "The following packages are going to be removed"
+msgstr "Se van a quitar los siguientes paquetes"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Construir NIC 煤nica -->"
+msgid "Connect to the Internet"
+msgstr "Conectar a Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "隆No se seleccion贸 n煤cleo!"
+msgid "Use existing partitions"
+msgstr "Usar la partici贸n existente"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Construir el n煤cleo completo -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadiense (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "ISO de arranque"
+msgid "Mouse device: %s\n"
+msgstr "Dispositivo del rat贸n: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disquete de arranque"
+msgid "Reselect correct fonts"
+msgstr "Volver a seleccionar tipograf铆as correctas"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
+"Options Description:\n"
"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"Generalidades de drakTermServ\n"
-"\t\t\t\n"
-" - Crear im谩genes de arranque con Etherboot habilitado:\n"
-" \t\tPara arrancar un n煤celo por Etherboot, se debe crear una imagen de "
-"arranque initrd/n煤cleo especial\n"
-" \t\tmkinitrd-net hace mucho de esto y drakTermServ s贸lo es una "
-"interfaz gr谩fica\n"
-" \t\tpara ayudar a administrar/personalizar estas im谩genes.\n"
-"\n"
-" - Mantener /etc/dhcp.conf:\n"
-" \t\tPara arrancar los clientes desde la red, cada cliente necesita una "
-"entrada dhcpd.conf asignando una direcci贸n IP\n"
-" \t\ty las im谩genes de arranque para la m谩quina. drakTermServ ayuda a "
-"crear/quitar estas entradas.\n"
-"\t\t\t\n"
-" \t\t(Las tarjetas PCI pueden omitir la imagen - etherboot pedir谩 la "
-"imagen correcta. Tambi茅n\n"
-" \t\tdeber铆a considerar que cuando etherboot busca las im谩genes, espera "
-"nombres como\n"
-" \t\tboot-3c59x.nbi, en vez de boot-3c59x.2.4.19-16mdk.nbi)\n"
-"\t\t\t\n"
-" \t\tUna entrada t铆pica de dhcpd.conf para soportar un cliente sin "
-"disco luce as铆:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\thardware ethernet\t00:20:af:2f:7f:9d;\n"
-"\t\t\t\tfixed address\t\t192.168.192.3;\n"
-"\t\t\t\t/*type\t\t\tfat;*/\n"
-"\t\t\t\tfilename\t\t\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tSi bien puede utilizar una cantidad de direcciones IP, en vez de "
-"configurar una entrada\n"
-"\t\t\tespec铆fica para cada cliente, usar un esquema de direcciones fijas "
-"facilita el uso\n"
-"\t\t\tde la funcionalidad de archivos de configuraci贸n espec铆ficos para los "
-"clientes\n"
-"\t\t\tque brinda ClusterNFS.\n"
-"\t\t\t\n"
-"\t\t\tNota: La entrada \"/*type\" s贸lo la utiliza drakTermServ. Los "
-"clientes pueden ser \"thin\"*/\n"
-"\t\t\to 'fat'. Los clientes livianos corren la mayor铆a del software en el "
-"servidor por medio de xdmcp, mientras que los clientes pesados corren la "
-"mayor铆a\n"
-"\t\t\tdel software en la m谩quina cliente. Un inittab especial, /etc/inittab\\"
-"$\\$IP=client_ip\\$\\$ se\n"
-"\t\t\tescribe para los clientes livianos. Los archivos de configuraci贸n del "
-"sistema xdm-config, kdmrc, y gdm.conf se modifican\n"
-"\t\t\tsi se utilizan clientes livianos, para habilitar xdmcp. Debido a que "
-"hay problemas de seguridad al utilizar xdmcp,\n"
-"\t\t\thosts.deny y hosts.allow se modifican para limitar el acceso a la "
-"subred local.\n"
-"\t\t\t\n"
-"\t\t\tNota: Debe detener/iniciar el servidor luego de a帽adir o cambiar "
-"clientes.\n"
-"\t\t\t\n"
-" - Maintener /etc/exports:\n"
-" \t\tClusternfs permite exportar la ra铆z del sistema de archivos a "
-"los clientes sin disco. drakTermServ\n"
-" \t\tconfigura la entrada correcta para permitir acceso an贸nimo al "
-"sistema de archivos ra铆z desde\n"
-" \t\tlos clientes sin disco.\n"
-"\n"
-" \t\tUna entrada exports t铆pica para clusternfs es:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBRED/M脕SCARA(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tDonde SUBRED/M脕SCARA est谩n definidas por su red.\n"
-" \t\t\n"
-" - Maintener /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tPara que los usuarios puedan conectarse al sistema desde un "
-"cliente sin disco, la entrada en\n"
-" \t\t/etc/shadow debe duplicarse en /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ ayuda\n"
-" \t\ten este aspecto a帽adiendo o quitando usuarios del sistema de "
-"este archivo.\n"
-"\n"
-" - /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$ por cliente:\n"
-" \t\tA trav茅s de clusternfs, cada cliente sin disco puede tener sus "
-"archivos de configuraci贸n 煤nicos\n"
-" \t\ten el sist. de archivos ra铆z del servidor. En el futuro "
-"drakTermServ ayudar谩 a crear\n"
-" \t\testos archivos.\n"
-"\n"
-" - Archivos de configuraci贸n del sistema por cliente:\n"
-" \t\tA trav茅s de clusternfs, cada cliente sin disco puede tener sus "
-"archivos de configuraci贸n 煤nicos\n"
-" \t\ten el sist. de archivos ra铆z del servidor. En el futuro "
-"drakTermServ ayudar谩 a crear archivos\n"
-" \t\tcomo /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard sobre una base\n"
-" \t\tpor cliente.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ configurar谩 este archivo para trabajar en conjunto "
-"con las im谩genes creadas\n"
-" \t\tpor mkinitrd-net, y las entradas en /etc/dhcpd.conf, para servir "
-"la imagen de arranque\n"
-" \t\ta cada cliente sin disco.\n"
-"\n"
-" \t\tUn archivo de configuraci贸n t铆pico de tftp luce as铆:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tAqu铆 los cambios con respecto a lo predeterminado son cambiar el "
-"flag disable a\n"
-" \t\t'no' y cambiar la ruta del directorio a /var/lib/tftpboot, donde "
-"mkinitrd-net\n"
-" \t\tpone sus im谩genes.\n"
+"descricpi贸n de las opciones:\n"
"\n"
-" - Crear disquetes/CDs Etherboot:\n"
-" \t\tLas m谩quinas sin disco necesitan o bien im谩genes ROM en las NIC, "
-"o un disquete o\n"
-" \t\tCD de arranque para iniciar la secuencia de arranque. "
-"drakTermServ ayudar谩 a generar estas,\n"
-" \t\tbasadas en la NIC en la m谩quina cliente.\n"
-" \t\t\n"
-" \t\tUn ejemplo b谩sico para crear un disquete de arranque para una "
-"3Com 3c509 manualmente:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
-"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
+"s贸lo los respaldos ya hechos se env铆an al servidor.\n"
+"Por el momento, necesita realizar el respaldo en su disco r铆gido\n"
+"antes de enviarlo al servidor.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Opciones\n"
"\n"
-"\n"
-" Gracias:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Aqu铆 puede elegir si desea que su m谩quina cambie autom谩ticamente a la\n"
+"interfaz gr谩fica al arrancar. Obviamente, querr谩 marcar \"%s\" si su\n"
+"sistema actuar谩 como servidor, o si no tuvo 茅xito en la configuraci贸n de su\n"
+"pantalla."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-"Copyright (C) 2002 por MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Ahora vamos a configurar la conexi贸n %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "A帽adir/Quitar clientes"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporativo"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "A帽adir/Quitar usuarios"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resoluci贸n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Detecci贸n autom谩tica de impresoras"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "no se pueden encontrar tipograf铆as.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Im谩genes de arranque por la red"
+msgid "Language"
+msgstr "Elija su idioma"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disquete/ISO Etherboot"
+msgid "Printer model selection"
+msgstr "Selecci贸n del modelo de impresora"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Detener el Servidor"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Se perder谩n todos los datos de la partici贸n %s despu茅s de cambiar su tipo"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Iniciar el Servidor"
+msgid "%d seconds"
+msgstr "%d segundos"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Deshabilitar el Servidor"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Inserte un disquete en blanco en la unidad %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Habiltar el Servidor"
+msgid "A valid URI must be entered!"
+msgstr "隆Debe introducir un URI v谩lido!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Configuraci贸n del Servidor de Terminales de Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Se encontr贸 la interfaz \"%s\", 驴desea utilizarla?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Borrar el 煤ltimo elemento"
+msgid "Re-configure interface and DHCP server"
+msgstr "Volver a configurar la interfaz y el servidor DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "A帽adir un elemento"
+msgid "Sound configuration"
+msgstr "Configuraci贸n de sonido"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Instalaci贸n autom谩tica"
+msgid "Photo test page"
+msgstr "P谩gina de prueba de foto"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquete ha sido generado satisfactoriamente.\n"
-"Ahora puede repetir su instalaci贸n."
+msgid "Custom disk partitioning"
+msgstr "Particionamiento de disco personalizado"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "隆Felicidades!"
+msgid "Enter Printer Name and Comments"
+msgstr "Ingrese nombre de la impresora y comentarios"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Las siguientes impresoras\n"
"\n"
-"Bienvenido.\n"
-"\n"
-"Los par谩metros de la instalaci贸n autom谩ticas est谩n disponibles en las "
-"secciones de la izquierda"
+"%s%s\n"
+"est谩n conectadas directamente a su sistema"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Creando el disquete de instalaci贸n autom谩tica"
+msgid "type: %s"
+msgstr "tipo: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "manual"
+msgid "Slovakian (QWERTY)"
+msgstr "Eslovaco (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Por favor, elija para cada paso si desea que se repita como su instalaci贸n, "
-"o el mismo ser谩 manual"
+msgid "No Sound Card detected!"
+msgstr "隆No se detect贸 tarjeta de sonido!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Configuraci贸n de pasos autom谩ticos"
+msgid "Mouse Port"
+msgstr "Puerto del rat贸n"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "reproducir"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Debe reiniciar el Display Manager para que los cambios tengan efecto. \n"
+"(service dm restart - en la consola)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Servidor FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Est谩 a punto de configurar el un disquete de Instalaci贸n Autom谩tica. Esta "
-"caracter铆stica es algo peligrosa y debe ser utilizada con cuidado.\n"
-"\n"
-"Con esa caracter铆stica, podr谩 repetir la instalaci贸n que ha realizado en "
-"esta computadora, y se le consultar谩 interactivamente en algunos pasos, para "
-"poder cambiar los valores de los mismos.\n"
-"\n"
-"Para m谩xima seguridad, el particionado y formateado nunca ser谩 realizado "
-"autom谩ticamente, sin importar lo que eligi贸 durante la instalaci贸n de esta "
-"computadora.\n"
+"Argumentos: (arg)\n"
"\n"
-"驴Desea continuar?"
+"Habilitar/deshabilitar verificaci贸n horaria de seguridad de msec."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Configurador de Instalaci贸n Autom谩tica"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "Conversi贸n de tipograf铆as PFM"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No se encuentra el archivo de imagen `%s' necesario."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "El tipo de bus sobre el que est谩 conectado el rat贸n"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "隆Error!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"Problemas durante la restauraci贸n:\n"
-"\n"
-"Durante el paso de restauraci贸n, Drakbackup verificar谩 todos los\n"
-"archivos de respaldo antes de restaurarlos.\n"
-"Antes de la restuaraci贸n, Drakbackup quitar谩 el\n"
-"directorio original, y perder谩 todos los datos en el mismo.\n"
-"Es importante ser cuidadoso y no modificar los archivos de\n"
-"datos de respaldo a mano.\n"
+"Argumentos: (size)\n"
+"Ajustar el tama帽o de la historia de comandos. Un valor de -1 significa "
+"ilimitada."
-#: ../../standalone/drakbackup:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"descricpi贸n de las opciones:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
-"s贸lo los respaldos ya hechos se env铆an al servidor.\n"
-"Por el momento, necesita realizar el respaldo en su disco r铆gido\n"
-"antes de enviarlo al servidor.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Descripci贸n:\n"
+"A manera de revisi贸n, DrakX presentar谩 un resumen de las distintas\n"
+"informaciones que tiene acerca de su sistema. Dependiendo del hardware\n"
+"instalado puede tener algunas o todas las entradas siguientes. Cada entrada\n"
+"est谩 compuesta del elemento de configuraci贸n a configurar, seguido de un\n"
+"peque帽o resumen de la configuraci贸n corriente. Haga clic sobre el bot贸n\n"
+"\"%s\" correspondiente para cambiar eso.\n"
"\n"
-" Drakbackup se usa para respaldar su sistema.\n"
-" Durante la configuraci贸n puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
+" * \"%s\": verifique la configuraci贸n de la disposici贸n corriente del\n"
+"teclado y c谩mbiela si es necesario.\n"
"\n"
-" Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco r铆gido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.)\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
+" * \"%s\": verifique la selecci贸n corriente del pa铆s. Si Usted no se\n"
+"encuentra en este pa铆s haga clic sobre el bot贸n \"%s\" y elija otro. Si su\n"
+"pa铆s no se muestra en la primer lista haga clic sobre el bot贸n \"%s\" para\n"
+"obtener la lista completa de pa铆ses.\n"
"\n"
-" Drakbackup le permite restaurar su sistema a un\n"
-" directorio seleccionado por el usuario.\n"
+" * \"%s\": De manera predeterminada DrakX deduce su huso horario bas谩ndose\n"
+"en el pa铆s que ha elegido. Puede hacer clic sobre el bot贸n \"%s\" si esto\n"
+"no es correcto.\n"
"\n"
-" Predeterminadamente se almacenar谩n todos los respaldos en\n"
-" su directorio /var/lib/drakbackup.\n"
+" * \"%s\": verifique la configuraci贸n del rat贸n y haga clic sobre el bot贸n\n"
+"para cambiarla, si es necesario.\n"
"\n"
-" Archivo de configuraci贸n:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": al hacer clic sobre el bot贸n \"%s\" se abrir谩 el asistente de\n"
+"configuraci贸n de la impresora. Consulte el cap铆tulo correspondiente de la\n"
+"\"Gu铆a de Comienzo\" para m谩s informaci贸n sobre c贸mo configurar una\n"
+"impresora nueva. La interfaz presentada all铆 es similar a la utilizada\n"
+"durante la instalaci贸n.\n"
"\n"
+" * \"%s\": si se detecta una tarjeta de sonido en su sistema, la misma se\n"
+"muestra aqu铆. Si nota que la tarjeta de sonido mostrada no es la que est谩\n"
+"realmente instalada en su sistema, puede hacer clic sobre el bot贸n y elegir\n"
+"otro controlador.\n"
"\n"
-"Paso de restauraci贸n:\n"
-" \n"
-" Durante la restauraci贸n, DrakBackup quitar谩 su \n"
-" directorio original y verificar谩 que todos \n"
-" los archivos de respaldo no est茅n corruptos. Se \n"
-" recomienda que haga un 煤ltimo respaldo antes de restaurar.\n"
+" * \"%s\": de manera predeterminada DrakX configura su interfaz gr谩fica en\n"
+"\"800x600\" o \"1024x768\" de resoluci贸n. Si eso no le satisface, haga clic\n"
+"sobre \"%s\" para volver a configurar su interfaz gr谩fica.\n"
+"\n"
+" * \"%s\": si se detecta una tarjeta de TV en su sistema, la misma se\n"
+"muestra aqu铆. Si tiene una tarjeta de TV y la misma no se detecta, haga\n"
+"clic sobre \"%s\" para intentar configurarla a mano.\n"
+"\n"
+" * \"%s\": si se detecta una tarjeta RDSI en su sistema, la misma se\n"
+"muestra aqu铆. Puede hacer clic sobre \"%s\" para cambiar los par谩metros\n"
+"asociados a la misma.\n"
+"\n"
+" * \"%s\": haga clic sobre \"%s\" si desea configurar ahora el acceso a la\n"
+"Internet o a su red local.\n"
+"\n"
+" * \"%s\": esta entrada le ofrece volver a definir el nivel de seguridad\n"
+"como se ajust贸 en un paso previo ()\n"
"\n"
+" * \"%s\": si planifica conectar su m谩quina a la Internet, es una buena\n"
+"idea protegerse de las intrusiones configurando un cortafuegos. Consulte la\n"
+"secci贸n correspondiente de la \"Gu铆a de Comienzo\" para detalles acerca de\n"
+"los ajustes del cortafuegos.\n"
"\n"
+" * \"%s\": si desea cambiar la configuraci贸n de su cargador de arranque,\n"
+"haga clic sobre ese bot贸n. Esto deber铆a estar reservado para usuarios\n"
+"avanzados.\n"
+"\n"
+" * \"%s\": aqu铆 podr谩 tener un control fino sobre qu茅 servicios correr谩n en\n"
+"su m谩quina. Si planifica utilizar esta m谩quina como servidor es una buena\n"
+"idea revisar estos ajustes."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comores"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" actualizaciones 2002 MandrakeSoft por Stew Benedict <sbenedict"
-"\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"Ahora vamos a configurar la conexi贸n %s.\n"
+"\n"
+"\n"
+"Pulse siguiente para continuar."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Modo de Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "EEUU (cable)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"隆No se puede volver a iniciar LiLo!\n"
+"Ejecute \"lilo\" como root en la l铆nea de comandos para completar la "
+"instalaci贸n del tema de LiLo."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Rat贸n de 3 botones gen茅rico"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Elija otro soporte desde el cual restaurar"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Administrador de software"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14670,17 +13980,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"descripci贸n de la restauraci贸n:\n"
@@ -14706,5093 +14018,5793 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"descripci贸n de las opciones:\n"
-"\n"
-" - Respladar archivos del sistema:\n"
-" \n"
-"\tEsta opci贸n permite respaldar su directorio /etc, que\n"
-"\tcontiene todos los archivos de configuraci贸n. Por favor\n"
-"\ttenga cuidado durante la restauraci贸n de no sobre-escribir:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Respaldar archivos de usuario:\n"
-"\n"
-"\tEsta opci贸n permite seleccionar todos los usuarios que\n"
-"\tdesea respaldar.\n"
-"\tPara preservar espacio, se recomienda no incluir el\n"
-"\tcache del navegador web.\n"
-"\n"
-" - Respaldar otros archivos:\n"
-"\n"
-"\tEsta opci贸n permite a帽adir m谩s datos a guardar.\n"
-"\tCon el otro respaldo no es posible, por ahora,\n"
-"\tseleccionar el respaldo incremental.\t\t\n"
-" \n"
-" - Respaldo incremental:\n"
-"\n"
-"\tEl respaldo incremental es la opci贸n m谩s potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego s贸lo aquellos que cambiaron.\n"
-"\tLuego, podr谩, durante la etapa de restauraci贸n,n\trestaurar sus datos "
-"desde una fecha especificada.\n"
-"\t\n"
-"\tSi no ha seleccionado esta opci贸n todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Algunos errores con sendmail son causados por\n"
-" una configuraci贸n mala de postfix. Para resolverlo tiene\n"
-" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Reenviar"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"descripci贸n de las opciones:\n"
-"\n"
-" En este paso Drakbackup le permite cambiar:\n"
-"\n"
-" - El modo de compresi贸n:\n"
-" \n"
-" Si marca compresi贸n bzip2, comprimir谩 mejor sus datos\n"
-" que gzip (alrededor del 2-10 %%).\n"
-" Por defecto, esta opci贸n no est谩 marcada dado que este\n"
-" modo de compresi贸n necesita m谩s tiempo (100 veces m谩s)\n"
-" \n"
-" - El modo de actualizaci贸n:\n"
-"\n"
-" Esta opci贸n actualizar谩 su respaldo, pero no es\n"
-" realmente 煤til ya que necesita descomprimirlo\n"
-" antes que pueda actualizarlo.\n"
-" \n"
-" - el modo .backupignore:\n"
-"\n"
-" Al igual que cvs, Drakbackup ignorar谩 todas las referencias\n"
-" inclu铆das en los archivos .backupignore de cada directorio.\n"
-" ej: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD en su lugar - continuar."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Restaurar"
+msgid "Network & Internet"
+msgstr "Redes e Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Respaldar Ahora"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituano \"fon茅tico\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Configuraci贸n avanzada"
+msgid "Net Boot Images"
+msgstr "Im谩genes de arranque por la red"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Configuraci贸n del Asistente"
+msgid "Sharing of local scanners"
+msgstr "Compartir esc谩neres locales"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Ver configuraci贸n del respaldo"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Fall贸 la prueba Plug'n Play. Por favor, elija un monitor espec铆fico"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Respaldar Ahora desde archivo de configuraci贸n"
+msgid "Services and deamons"
+msgstr "Servicios y demonios"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Configuraci贸n de Drakbackup"
+msgid "Remote host name missing!"
+msgstr "隆Falta el nombre del host remoto!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Progreso total"
+msgid "with /usr"
+msgstr "con /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Enviando archivos..."
+msgid "Network"
+msgstr "Red"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "Env铆o de archivos por FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Detectar autom谩ticamente las impersoras conectadas a m谩quinas que corren "
+"Microsoft Windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Respaldar otros archivos"
+msgid "This password is too simple"
+msgstr "Esta contrase帽a es demasiado sencilla"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Respaldar archivos de usuarios"
+msgid "Slovakian (QWERTZ)"
+msgstr "Eslovaco (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Respaldar archivos del sistema"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Modificar y crear en diferentes lenguajes tales como Perl, Python, C, C++ "
+"nunca ha sido tan f谩cil como ahora gracias a GNU gcc 3 y los mejores "
+"entornos de desarrollo Open Source."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "En desarrollo ... por favor, espere."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Instalaci贸n m铆nima \"en serio\" (especialmente sin urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"No se econtr贸 el archivo de configuraci贸n,\n"
-" por favor haga clic sobre Asistente o Avanzado."
+"Transferir \n"
+"Ahora"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Por favor, elija los datos a respaldar..."
+msgid "Use daemon"
+msgstr "Usar servidor"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
+msgid "Authentication"
+msgstr "Autentificaci贸n"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Por favor, seleccione los datos a restaurar..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Agregar esta impresora a Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Se deben instalar los siguientes paquetes:\n"
+msgid "Additional CUPS servers: "
+msgstr "Servidores CUPS adicionales:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Error enviando el archivo por FTP.\n"
-" Por favor, corrija su configuraci贸n de FTP."
+"Elija una de las impresoras detectadas autom谩ticamente de la lista o ingrese "
+"el nombre del host o la IP y el n煤mero de puerto opcional (9100, por "
+"defecto) en los campos."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "驴D贸nde desea montar a %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Restaurar por medio de la red"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Argelia"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Tama帽o de initrd"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Error enviando correo con sendmail.\n"
-" Su correo-e de reporte no se envi贸.\n"
-" Por favor, configure a sendmail"
+"En caso que est茅n disponibles diferentes servidores para su tarjeta, con o\n"
+"sin aceleraci贸n de 3D, entonces se le propone elegir el servidor que mejor\n"
+"satisface sus necesidades."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Siguiente"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tRespaldar usando tar y gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Anterior"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Guardar"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPCI脫N]...\n"
+" --no-confirmation no pedir confirmaci贸n en modo MandrakeUpdate\n"
+" --no-verify-rpm no verificar firmas de los paquetes\n"
+" --changelog-first mostrar changelog antes de lista de archivos en "
+"ventana de descripci贸n\n"
+" --merge-all-rpmnew proponer mezclar todos los archivos .rpmnew/.rpmsave "
+"encontrados"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Realizar copia de respaldo"
+msgid "Setting Default Printer..."
+msgstr "Configurando impresora predeterminada..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Progreso de restauraci贸n"
+msgid "Interface %s (using module %s)"
+msgstr "Interfaz %s (usando el m贸dulo %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Restaurar desde Cat谩logo"
+msgid "Name: %s\n"
+msgstr "Nombre: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Examinar un repositorio de restauraci贸n nuevo."
+msgid "Generating preview ..."
+msgstr "Generando previsualizaci贸n..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD en su lugar - continuar."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"La frec. deber铆a tener el sufijo k, M o G (por ejemplo, \"2.46G\" para una "
+"frec. de 2.46 GHz), o a帽adir suficientes '0' (ceros)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Restauraci贸n personalizada"
+msgid "serial"
+msgstr "serie"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Restaurar todas las copias de respaldo"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Fall贸 la restauraci贸n..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgiano (estilo \"lat铆n\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Archivos restaurados..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "Obtenga lo mejor con los socios estrat茅gicos de Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Se necesita Ruta o M贸dulo"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Ahora puede proporcionar las opciones al m贸dulo %s.\n"
+"Note que cualquier direcci贸n debe ingresarse con el prefijo 0x, ej.: '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Se necesita nombre del host"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 le brinda el Centro de Control de Mandrake, una "
+"herramienta potente para adaptar por completo su computadora al uso que hace "
+"de la misma. Configure y personalice elementos tales como el nivel de "
+"seguridad, los perif茅ricos (pantalla, rat贸n, teclado...), la conexi贸n con la "
+"Internet, 隆y mucho m谩s!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Se necesita nombre de usuario"
+msgid "Kenya"
+msgstr "Kenia"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Se necesita contrase帽a"
+msgid "Use ``Unmount'' first"
+msgstr "Use \"Desmontar\" primero"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Ruta del host o m贸dulo"
+msgid "Installing mtools packages..."
+msgstr "Instalando paquetes mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Nombre del host"
+msgid "You must specify a root partition"
+msgstr "Debe especificar una partici贸n ra铆z"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restaurar por medio del protocolo de red: %s"
+msgid "first step creation"
+msgstr "primer paso de creaci贸n"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Restaurar por medio de la red"
+msgid "Both Shift keys simultaneously"
+msgstr "Ambas teclas Shift simult谩neamente"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "No es la cinta adecuada. La cinta est谩 etiquetada %s."
+msgid "Select a scanner model"
+msgstr "Seleccione un modelo de esc谩ner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Inserte la cinta con la etiqueta de volumen %s\n"
-" en la unidad de cinta %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR de nueva generaci贸n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Restaurar desde cinta"
+msgid "Drakbackup Configuration"
+msgstr "Configuraci贸n de Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "No es el CD correcto. El disco est谩 etiquetado %s."
+msgid "Save as.."
+msgstr "Guardar como..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Inserte el CD con la etiqueta de volumen %s\n"
-" en la unidad de CD bajo el punto de montaje /mnt/cdrom"
+"Todav铆a no se ha configurado esta interfaz.\n"
+"Lance el asistente de configuraci贸n en la ventana principal"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Restaurar desde CD"
+msgid "Korea (North)"
+msgstr "Corea (del Norte)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Copiar archivos no encontrados en %s."
+msgid "Autologin"
+msgstr "Conexi贸n autom谩tica"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Cambiar la\n"
-"ruta de restauraci贸n"
+msgid "System configuration"
+msgstr "Configuraci贸n del sistema"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Contrase帽a del Administrador del Dominio"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Restaurar los archivos\n"
-"seleccionados"
+"Adapte perfectamente su computadora a sus necesidades gracias a las 11 "
+"interfaces de usuario de Mandrake Linux las cuales se pueden modificar por "
+"completo: KDE3.1, Gnome 2.2, WindowMaker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Configurando impresora..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Restaurar entrada\n"
-"del Cat谩logo seleccionada"
+"Para asegurar la integridad de los datos luego de cambiar el tama帽o a\n"
+"las particiones, se pueden ejecutar verificaciones de los sist. de archivos\n"
+"la pr贸xima vez que arranque en Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Borrar directorios de los usuarios antes de restaurar."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Realizar respaldo nuevo antes de restaurar (s贸lo para respaldos "
-"incrementales)"
+"si se pone en s铆, correr algunas pruebas contra la base de datos de rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "seleccione la ruta para restaurar (en vez de /)"
+msgid "Virgin Islands (British)"
+msgstr "Islas V铆rgenes (Brit谩nicas)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Restaurar otros"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Restaurar usuarios"
+msgid "click here if you are sure."
+msgstr "haga clic aqu铆 si est谩 seguro."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Restaurar archivos del sistema"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"No se econtr贸 el archivo de configuraci贸n,\n"
+" por favor haga clic sobre Asistente o Avanzado."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Otros soportes"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Aqu铆 se listan las particiones Linux existentes que se detectaron en su\n"
+"disco r铆gido. Puede mantener las elecciones hechas por el asistente, ya que\n"
+"las mismas son buenas para las instalaciones m谩s comunes. Si hace cambios,\n"
+"al menos debe definir una partici贸n ra铆z (\"/\"). No elija una partici贸n\n"
+"muy peque帽a o no podr谩 instalar software suficiente. Si desea almacenar sus\n"
+"datos en una partici贸n separada, tambi茅n puede necesitar crear una\n"
+"partici贸n para \"/home\" (s贸lo es posible si tiene m谩s de una partici贸n\n"
+"Linux disponible)\n"
+"\n"
+"Cada partici贸n se lista como sigue: \"Nombre\", \"Capacidad\".\n"
+"\n"
+"\"Nombre\" est谩 estructurado: \"tipo de disco r铆gido\", \"n煤mero de disco\n"
+"r铆gido\", \"n煤mero de partici贸n\" (por ejemplo, \"hda1\").\n"
+"\n"
+"\"Tipo de disco r铆gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
+"el mismo es un disco SCSI.\n"
+"\n"
+"\"N煤mero de disco r铆gido\" siempre es una letra que sigue a \"hd\" o a\n"
+"\"sd\". Para los discos IDE:\n"
+"\n"
+" * \"a\" significa \"disco r铆gido maestro en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"b\" significa \"disco r铆gido esclavo en la controladora IDE\n"
+"primaria\",\n"
+"\n"
+" * \"c\" significa \"disco r铆gido maestro en la controladora IDE\n"
+"secundaria\",\n"
+"\n"
+" * \"d\" significa \"disco r铆gido esclavo en la controladora IDE\n"
+"secundaria\".\n"
+"\n"
+"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
+"significa \"segunda SCSI ID menor\", etc."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Elija otro soporte desde el cual restaurar"
+msgid "Remove"
+msgstr "Quitar"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
+msgid "Lesotho"
+msgstr "Lesoto"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaurar desde el disco r铆gido."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Usar cuota para archivos de respaldo"
+msgid "Pipe job into a command"
+msgstr "Filtrar el trabajo en un comando"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-"Por favor, ingrese el tama帽o m谩ximo\n"
-" permitido para Drakbackup"
+"dispositivo din谩mico nuevo generado por el devfs incorporado del n煤cleo"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Por favor, ingrese el directorio a guardar:"
+msgid "Yes"
+msgstr "S铆"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Usar el disco r铆gido para copia de respaldo"
+msgid "Cote d'Ivoire"
+msgstr "Costa de Marfil"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Por favor, elija la fecha para restaurar"
+msgid "Which protocol do you want to use?"
+msgstr "驴Qu茅 protocolo desea utilizar?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Respaldar los archivos del sistema anteriores a:"
+msgid "Restore Progress"
+msgstr "Progreso de restauraci贸n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Estonia"
+msgstr "Estonia"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Lista de usuarios a restaurar (s贸lo importa la fecha m谩s reciente por "
-"usuario)"
+"Elija el host donde se deber铆an hacer disponibles los esc谩neres locales:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Se pueden restaurar los otros archivos."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
+"La 煤nica soluci贸n es desplazar sus particiones primarias para que el hueco "
+"est茅 despu茅s de las particiones extendidas"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Configuraci贸n de la restauraci贸n"
+msgid "Channel"
+msgstr "Canal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Recuperados satisfactoriamente en %s"
+msgid "Add"
+msgstr "Agregar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Todos los datos seleccionados han sido "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "No se ha configurado la conexi贸n compartida a Internet."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Los archivos de respaldo est谩n corruptos"
+msgid " Error while sending mail. \n"
+msgstr " Error durante el env铆o de correo. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor, desmarque o qu铆telo la pr贸xima vez."
+msgid "Keyboard"
+msgstr "Teclado"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Lista de datos corruptos:\n"
-"\n"
+"Inserte el CD con la etiqueta de volumen %s\n"
+" en la unidad de CD bajo el punto de montaje /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Lista de datos a restaurar:\n"
-"\n"
+"La tasa deber铆a tener el sufijo k, M o G (por ejemplo, \"11M\" para 11M), o "
+"a帽adir suficientes '0' (ceros)"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Sin configuraci贸n, por favor haga clic sobre el Asistente o Avanzado.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Elija la conexi贸n que desea configurar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Red por webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Por favor espere, configurando el nivel de seguridad..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Red por rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 es la mejor plataforma de desarrollo."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Red por SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Configurando el dispositivo de red %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Red por FTP.\n"
+msgid "activated"
+msgstr "activado"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Por favor, elija la interfaz de red que se utilizar谩 para el servidor DHCP."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Encontrando los paquetes a actualizar..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco r铆gido.\n"
+msgid "Mount point: "
+msgstr "Punto de montaje: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Servidor (%s) incluye :\n"
+msgid "parse all fonts"
+msgstr "analizar todas las tipograf铆as"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tRespaldar usando tar y gzip\n"
+msgid "With X"
+msgstr "Con X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tRespaldar usando tar y bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Configuraci贸n multi-monitor"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incluir archivos del sistema\n"
+msgid "No browser available! Please install one"
+msgstr "隆No hay un navegador disponible! Por favor, instale uno"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"驴Conservar los cambios?\n"
+"La configuraci贸n actual es:\n"
"\n"
-"- Opciones:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nombre de usuario: %s\n"
-"\t\t en ruta: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Guardar usando %s en el host: %s\n"
+"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
+"de todos los usuarios conectados a una m谩quina que ejecuta el demonio rwho\n"
+"(similar al finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Nombre de dominio"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Guardar en cinta en el dispositivo: %s"
+msgid "Sharing of local printers"
+msgstr "Compartir impresoras locales"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-sesi贸n)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " en el dispositivo: %s"
+msgid "Available printers"
+msgstr "Impresoras disponibles"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Vac铆o"
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Grabar en CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Borrar los archivos tar del disco luego de la copia de respaldo.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Guardar en el disco en la ruta: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Otros archivos:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (por \"X Window System\") es el coraz贸n de la interfaz gr谩fica de\n"
+"GNU/Linux en el que se apoyan todos los entornos gr谩ficos (KDE, GNOME,\n"
+"AfterStep, WindowMaker, etc.) que se incluyen con Mandrake Linux.\n"
"\n"
-"- Archivos de usuario:\n"
+"Se le presentar谩 la lista de par谩metros diferentes a cambiar para obtener\n"
+"una presentaci贸n gr谩fica 贸ptima: Tarjeta gr谩fica\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar autom谩ticamente la\n"
+"tarjeta gr谩fica instalada en su m谩quina. Si este no es el caso, en esta\n"
+"lista puede elegir la tarjeta que realmente posee.\n"
+"\n"
+" En caso que est茅n disponibles diferentes servidores para su tarjeta, con\n"
+"o sin aceleraci贸n de 3D, entonces se le propone elegir el servidor que\n"
+"mejor satisface sus necesidades.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar autom谩ticamente el\n"
+"monitor conectado a su m谩quina. Si este no es el caso, en esta lista puede\n"
+"elegir el monitor que realmente posee.\n"
+"\n"
+"\n"
+"\n"
+"Resoluci贸n\n"
+"\n"
+" Aqu铆 puede elegir las resoluciones y profundidades de color entre\n"
+"aquellas disponibles para su hardware. Elija la que mejor se ajuste a sus\n"
+"necesidades (tenga presente que eso se puede cambiar luego de la\n"
+"instalaci贸n) En el monitor se muestra un ejemplo de la configuraci贸n\n"
+"elegida.\n"
+"\n"
+"\n"
+"\n"
+"Probar\n"
+"\n"
+" El sistema intentar谩 abrir una pantalla gr谩fica con la resoluci贸n\n"
+"deseada. Si puede ver el mensaje durante la prueba, y responde \"%s\",\n"
+"entonces DrakX continuar谩 con el paso siguiente. Si no puede ver el\n"
+"mensaje, significa que alguna parte de la configuraci贸n detectada\n"
+"autom谩ticamente no era la correcta y la prueba terminar谩 autom谩ticamente\n"
+"luego de 12 segundos, restaurando el men煤. Cambie los ajustes hasta obtener\n"
+"una pantalla correcta.\n"
+"\n"
+"\n"
+"\n"
+"Opciones\n"
+"\n"
+" Aqu铆 puede elegir si desea que su m谩quina cambie autom谩ticamente a la\n"
+"interfaz gr谩fica al arrancar. Obviamente, querr谩 marcar \"%s\" si su\n"
+"sistema actuar谩 como servidor, o si no tuvo 茅xito en la configuraci贸n de su\n"
+"pantalla."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "ancho del texto"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "驴D贸nde desea montar el dispositivo %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "El \"lease\" predeterminado (en segundos)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Interfaz \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Con documentaci贸n b谩sica (隆recomendado!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 bot贸n"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Archivos del sistema:\n"
+"Hay %d impresoras desconocidas conectadas directamente a su sistema"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Probar"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumentos: (arg)\n"
"\n"
-"Fuentes de respaldo: \n"
+"Permitir/Prohibir conexi贸n directa de root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Seleccionar manualmente el usuario"
+msgid "Korea"
+msgstr "Corea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Respaldar usuarios"
+msgid "Your choice? (default `%s'%s) "
+msgstr "驴Su elecci贸n? (por defecto %s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Respaldar el sistema"
+msgid "Raw printer"
+msgstr "Impresora en crudo"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Por favor, elija qu茅 desea respaldar"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Nombre oficial del fabricante de la CPU"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "en Dispositivo de Cinta"
+msgid "Vendor"
+msgstr "Fabricante"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "en CDROM"
+msgid "Interface %s"
+msgstr "Interfaz %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "a trav茅s de la red"
+msgid "Configure mouse"
+msgstr "Configuraci贸n del rat贸n"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "en disco r铆gido"
+msgid "Choose the mount points"
+msgstr "Seleccione los puntos de montaje"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Por favor, elija d贸nde desea realizar la copia de respaldo"
+msgid "OK"
+msgstr "Aceptar"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "M谩s opciones"
+msgid "Yugoslavian (latin)"
+msgstr "Yugoslavo (lat铆n)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Cu谩ndo"
+msgid "Installing"
+msgstr "Instalando"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "D贸nde"
+msgid "Launch userdrake"
+msgstr "Lanzar UserDrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Qu茅"
+msgid "Is this an install or an upgrade?"
+msgstr "驴Es una instalaci贸n o una actualizaci贸n?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Borrar los archivos tar del disco luego de respaldar a otro soporte."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Tarjeta RDSI interna"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Para compartir su conocimiento y ayudar a construir herramientas Linux, "
+"煤nase a los foros de discusi贸n que encontrar谩 en nuestras p谩ginas web para "
+"la \"Comunidad\""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Por favor, aseg煤rese que el servidor cron est谩 inclu铆do entre sus "
-"servicios.\n"
+"Felicidades, la configuraci贸n de la red y de Internet ha terminado.\n"
"\n"
-"Note que, por ahora, todos los soportes de \"red\" tambi茅n utilizan el disco."
+"Ahora se aplicar谩 la configuraci贸n a su sistema.\n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Disco r铆gido.\n"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Por favor, elija el soporte\n"
-"para la copia de respaldo."
+"Este paso se activa s贸lo si se encontr贸 una partici贸n GNU/Linux antigua en\n"
+"su sistema.\n"
+"\n"
+"DrakX ahora necesita saber si desea realizar una instalaci贸n nueva o una\n"
+"actualizaci贸n de un sistema Mandrake Linux existente:\n"
+"\n"
+" * \"%s\": Esta opci贸n borrar谩 pr谩cticamente por completo el sistema\n"
+"anterior. Si desea cambiar la forma en que se particionan sus discos, o\n"
+"cambiar el sistema de archivos, deber铆a utilizar esta opci贸n. Sin embargo,\n"
+"dependiendo de su esquema de particionado, puede evitar que se\n"
+"sobre-escriban algunos datos existentes.\n"
+"\n"
+" * \"%s\": Esta clase de instalaci贸n le permite actualizar los paquetes que\n"
+"en este momento est谩n instalados en su sistema Mandrake Linux. No se\n"
+"alteran las particiones corrientes de sus discos ni los datos de los\n"
+"usuarios. La mayor铆a de los otros pasos de configuraci贸n permanecen\n"
+"disponibles, de manera similar a lo que ocurre con una instalaci贸n\n"
+"est谩ndar.\n"
+"\n"
+"El uso de la opci贸n \"Actualizar\" deber铆a funcionar sin problemas para los\n"
+"sistemas Mandrake Linux que corren la versi贸n \"8.1\" o una posterior. No\n"
+"se recomienda realizar una actualizaci贸n sobre versiones anteriores a\n"
+"Mandrake Linux versi贸n \"8.1\"."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Impresora en un servidor CUPS remoto"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Por favor, elija el intervalo de\n"
-" tiempo entre cada copia de respaldo"
+"No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Usar servidor"
+msgid "delete"
+msgstr "borrar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "cada mes"
+msgid "here if no."
+msgstr "aqu铆 si no lo est谩."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "cada semana"
+msgid "DHCP host name"
+msgstr "Nombre de la m谩quina DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "cada d铆a"
+msgid "The maximum lease (in seconds)"
+msgstr "El \"lease\" m谩ximo (en segundos)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "cada hora"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Seleccione el puerto serie al que est谩 conectado el rat贸n, por favor."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disco r铆gido / NFS"
+msgid "Did it work properly?"
+msgstr "驴Funcion贸 adecuadamente?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "Pobre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Por favor, ingrese el directorio donde guardar:"
+msgid "The DHCP start range"
+msgstr "Comienzo del rango de DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
-"Por favor, marque si desea expulsar su cinta luego de la copia de seguridad."
+msgid "Grenada"
+msgstr "Granada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Por favor, marque si primero desea borrar su cinta."
+msgid "Unsafe"
+msgstr "Inseguro"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Por favor, marque si desea utilizar un dispositivo que no rebobina."
+msgid ", %s sectors"
+msgstr ", %s sectores"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the device name to use for backup"
+msgid "No"
+msgstr "No"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
+"驴Su impresora es un dispositivo multifunci贸n de HP o Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 con scanner, Sony IJP-V100), una HP "
+"PhotoSmart o una HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Usar cinta para realizar respaldo"
+msgid "Guadeloupe"
+msgstr "Guadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No CD device defined!"
-msgstr "隆No se defini贸 dispositivo de CD!"
+msgid "could not find any font.\n"
+msgstr "no se pueden encontrar tipograf铆as.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de\n"
-" su grabadora de CD, ej: 0,1,0"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "驴Desea que la tecla BackSpace env铆e un Delete en la consola?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Por favor, marque si est谩 utilizando un dispositivo DVDRAM"
+msgid "Vertical refresh rate"
+msgstr "Frecuencia de barrido vertical"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Por favor, marque si est谩 utilizando un dispositivo DVDR"
+msgid "Entering step `%s'\n"
+msgstr "Entrando en la etapa '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Borrar Ahora "
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Por favor, marque si desea borrar su soporte regrabable (1er. sesi贸n)"
+msgid "Removing %s ..."
+msgstr "Quitando %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor, marque si est谩 utilizando un soporte CDRW"
+msgid "Niger"
+msgstr "N铆ger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Por favor, marque para CD multi-sesi贸n"
+msgid "No printer"
+msgstr "Sin impresora"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Por favor, elija el tama帽o de su CD/DVD"
+msgid "alert configuration"
+msgstr "configuraci贸n de alerta"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Por favor, elija su dispositivo CD/DVD\n"
-"(Presione Intro para propagar las configuraciones a otros campos.\n"
-"Este campo no es necesario, s贸lo una herramienta para completar el "
-"formulario.)"
+msgid "NetWare Printer Options"
+msgstr "Opciones de la impresora NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Usar CD/DVDROM para la copia de respaldo"
+msgid "%s BootSplash (%s) preview"
+msgstr "Bootsplash de %s. No se puede crear la previsualizaci贸n (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "隆Necesita el nombre del host, el nombre de usuario y la contrase帽a!"
+msgid "General"
+msgstr "General"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Recordar esta contrase帽a"
+msgid "Printing system: "
+msgstr "Sistema de impresi贸n: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Por favor, ingrese su contrase帽a"
+msgid "Add a user"
+msgstr "A帽adir un usuario"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please enter your login"
-msgstr "Por favor, ingrese su nombre de usuario (login)"
+msgid "Network configuration (%d adapters)"
+msgstr "Configuraci贸n de la red (%d adaptadores)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Por favor, ingrese el directorio (o m贸dulo) para\n"
-" poner la copia de respaldo en este host."
+msgid "Mandatory package %s is missing"
+msgstr "Falta el paquete obligatorio %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Por favor, ingrese el nombre o la IP del host"
+msgid "Philippines"
+msgstr "Filipinas"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Otro (no drakbackup)\n"
-"las claves ya est谩n en su lugar"
+msgid "Ok"
+msgstr "Aceptar"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Nombre de la cola de impresi贸n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "驴Desea usar aboot?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bielorruso"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-"Transferir \n"
-"Ahora"
+"PDQ s贸lo soporta impresoras locales, impresoras LPD remotas, e impresoras "
+"Socket/TCP.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Mover los archivos a la nueva partici贸n"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Crear/Transferir\n"
-"claves de respaldo para SSH"
+"A帽ada aqu铆 los servidores CUPS cuyas impresoras desea usar. S贸lo necesita "
+"hacer esto si los servidores no difunden la informaci贸n de sus impresoras en "
+"la red local."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Usar Expect para SSH"
+msgid "Restore From Catalog"
+msgstr "Restaurar desde Cat谩logo"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "M茅todo de red:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Usar conexi贸n de red para realizar copia de respaldo"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Usuarios"
+msgid "group :"
+msgstr "grupo :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "fall贸 el montaje de la partici贸n %s en el directorio %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
+msgid "Lilo screen"
+msgstr "Pantalla de LiLo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Quitar los seleccionados."
+msgid "LILO with graphical menu"
+msgstr "LILO con men煤 gr谩fico"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "No incluir el cache del navegador"
+msgid "Estimating"
+msgstr "Estimando"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Por favor, marque a todos los usuarios que desa incluir en la copia de "
-"respaldo"
+msgid "You can't unselect this package. It is already installed"
+msgstr "No puede desmarcar este paquete. Ya est谩 instalado"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", impresora \"%s\" en el servidor SMB/Windows \"%s\""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Go on anyway?"
+msgstr "驴Seguir adelante?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"Con esta opci贸n podr谩 restaurar cualquier versi贸n de su\n"
-"directorio /etc."
+"Buscando los paquetes disponibles y reconstruyendo la base de datos de RPM..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incluir archivos cr铆ticos (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "隆No parece ser un soporte grabable!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
+msgid "Specify options"
+msgstr "Especificar las opciones"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Respaldar sus archivos del sistema. (directorio /etc)"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Estas opciones pueden respaldar y restaurar todos los archivos en el "
-"directorio /etc.\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "隆Debe indicar el nombre o la direcci贸n IP del servidor!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Un disquete de arranque personalizado da la posibilidad de arrancar su "
+"equipo\n"
+"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
+"煤til\n"
+"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
+"operativo borra\n"
+"SILO, o si SILO no funciona con su configuraci贸n de hardware. Un disquete\n"
+"de arranque personalizado tambi茅n se puede usar con la imagen de rescate de\n"
+" Mandrake haciendo as铆 mucho m谩s f谩cil la recuperaci贸n en caso de fallo\n"
+"grave del sistema.\n"
"\n"
-"Por favor, marque todas las opciones que necesita.\n"
+"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
+"en la primer disquetera y presione \"Aceptar\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr ""
+"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Selecci贸n de archivos."
+msgid "Norfolk Island"
+msgstr "Isla Norfolk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "隆No se puede crear cat谩logo!"
+msgid "Theme installation failed!"
+msgstr "隆Fall贸 la instalaci贸n de los temas!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Error durante el env铆o de correo. \n"
+msgid "Nothing to do"
+msgstr "Nada para hacer"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Actividades de Drakbackup por medio de cinta:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Usar para loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Actividades de Drakbackup por medio de CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Herramienta de Reporte de Errores de Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Actividades de Drakbackup por medio de %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "usar pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Moviendo los archivos a la nueva partici贸n"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s con aceleraci贸n 3D EXPERIMENTAL por hardware"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Avanzada"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Transferir"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Sueco)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Problema en la conexi贸n FTP: No fue posible enviar sus archivos de copia de "
-"respaldo por FTP.\n"
+msgid "More Options"
+msgstr "M谩s opciones"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganist谩n"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Borrar los archivos tar del disco luego de respaldar a otro soporte."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"lista de archivos env铆ada por FTP: %s\n"
-" "
+"cron es un programa UNIX est谩ndar que ejecuta programas especificados por\n"
+"el usuario peri贸dicamente. El cron de Vixie a帽ade varias funcionalidades al "
+"cron de Unix \n"
+"b谩sico, incluyendo una mayor seguridad y opciones de configuraci贸n m谩s "
+"potentes."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "隆No hay cambios para realizar respaldo!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Respaldar archivos del disco r铆gido..."
+msgid "Add Client -->"
+msgstr "A帽adir cliente -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Respaldar otros archivos..."
+msgid "Read carefully!"
+msgstr "隆Lea con cuidado!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Progreso de respaldo del disco r铆gido..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Respaldar archivos de usuario..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Por favor,\n"
+"teclee su norma de tv y pa铆s"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Respaldar archivos del sistema..."
+msgid "Port"
+msgstr "Puerto"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "隆No hay cinta en %s!"
+msgid "No (experts only)"
+msgstr "No (s贸lo expertos)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problema de permisos al acceder al CD."
+msgid "No kernel selected!"
+msgstr "隆No se seleccion贸 n煤cleo!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Borrar el soporte puede tardar unos momentos."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "隆No es un soporte borrable!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "隆No parece ser un soporte grabable!"
+msgid "The encryption keys do not match"
+msgstr "Las claves de cifrado no coinciden"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "隆No hay CDR/DVDR en la unidad!"
+msgid "Right \"Windows\" key"
+msgstr "Tecla \"Windows\" de la derecha"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "隆Fall贸 la transferencia WebDAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "隆El sitio WebDAV remoto ya est谩 sincronizado!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "si se pone en s铆, verificar contrase帽a vac铆a en /etc/shadow."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Progreso total"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Antes de continuar, deber铆a leer cuidadosamente los t茅rminos de la\n"
+"licencia. La misma cubre a toda la distribuci贸n Mandrake Linux. Si est谩 de\n"
+"acuerdo con todos los t茅rminos en la misma, marque la casilla \"%s\". Si\n"
+"no, simplemente apague su computadora."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Transferencia exitosa\n"
-"Puede verificar que se puede conectar al servidor con:\n"
+"Aqu铆 tiene una lista de las opciones disponibles para la impresora actual:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Resoluciones"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"sin que se le pida una contrase帽a."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"configurador de drakfirewall\n"
+"\n"
+"Esto configura un cortafuegos personal para esta m谩quina Mandrake Linux.\n"
+"Para una soluci贸n potente de cortafuegos dedicada, por favor eche un "
+"vistazo\n"
+"a la distribuci贸n especializada MandrakeSecurity Firewall."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s no responde"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Por favor, ingrese su nombre de usuario, contrase帽a y nombre de dominio para "
+"acceder a este host."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "No puedo encontrar %s en %s"
+msgid "Remove selected host"
+msgstr "Quitar host seleccionado"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Permiso denegado transfiriendo %s a %s"
+msgid "Network configuration"
+msgstr "Configuraci贸n de la red"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Contrase帽a incorrecta en %s"
+msgid "No sharing"
+msgstr "No compartir"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Sin pedido de contrase帽a en %s en el puerto %s"
+msgid "Move selected rule down one level"
+msgstr "Bajar un nivel la regla seleccionada"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "ERROR: No se puede lanzar %s."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "La generaci贸n de claves puede tardar unos momentos."
+msgid "Please check if you are using a DVDR device"
+msgstr "Por favor, marque si est谩 utilizando un dispositivo DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existe, 驴borrarlo?\n"
-"\n"
-"Advertencia: Si ya realiz贸 este proceso probablemente deba\n"
-" purgar la entrada de authorized_keys en el servidor."
+msgid "FATAL"
+msgstr "FATAL"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"El servidor DHCP permitir谩 a otras computadoras arrancar utilizando PXE en "
+"el rango de direcciones dado.\n"
"\n"
-" Detalles del reporte de DrakBackup\n"
-"\n"
+"La direcci贸n de red es %s utilizando una m谩scara de red de %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Borrar"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumentos: (arg)\n"
"\n"
-" Reporte del servidor DrakBackup\n"
-"\n"
-"\n"
+"Permitir/Prohibir reinicio por parte del usuario de la consola."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Reporte de DrakBackup \n"
-"\n"
+"Puede configurar su computadora para que inicie X autom谩ticamente\n"
+"al arrancar. 驴Desea que se lance X cuando reinicie?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Crear el disquete"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Desconectar %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ATENCI脫N"
+msgid "Status:"
+msgstr "Estado:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron todav铆a no est谩 disponible como no-root"
+msgid "HTTP proxy"
+msgstr "Proxy HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Fall贸 la instalaci贸n de %s. Ocurri贸 el siguiente error:"
+msgid "SSH Server"
+msgstr "Servidor SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "No, no deseo entrada autom谩tica"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Red por rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "S铆, deseo entrada autom谩tica con este (usuario, escritorio)"
+msgid "European protocol"
+msgstr "Protocolo europeo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Lanzar el sistema X-Window al comenzar"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", impresora \"%s\" en el servidor \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Modo del sistema"
+msgid "Error"
+msgstr "Error"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "permitir \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Pantalla de LiLo"
+msgid "Australia"
+msgstr "Australia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Seleccione un tema para\n"
-"lilo y bootsplash,\n"
-"puede elegirlos\n"
-"por separado"
+msgid "please wait during ttmkfdir..."
+msgstr "por favor, espere mientras corre ttmkfdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Temas"
+msgid "Configure only card \"%s\"%s"
+msgstr "Configurar s贸lo la tarjeta \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Selecci贸n de Splash"
+msgid "Level"
+msgstr "Nivel"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Change the printing system"
+msgstr "Cambiar el sistema de impresi贸n"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"En este momento est谩 usando %s como gestor de arranque.\n"
-"Haga click sobre configurar para lanzar el asistente de configuraci贸n."
+"Su sistema soporta configuraci贸n multi-monitor.\n"
+"驴Qu茅 desea hacer?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Instalaci贸n satisfactoria de LiLo y temas de Bootsplash"
+msgid "Configure services"
+msgstr "Servicios al inicio"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "隆Fall贸 la instalaci贸n de los temas!"
+msgid "Broadcast Address:"
+msgstr "Direcci贸n de difusi贸n:"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Notice"
-msgstr "Nota"
+msgid "mount failed: "
+msgstr "mount fall贸: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
+"El n煤cleo GNU/Linux necesita correr un lazo de c谩lculo al arrancar para "
+"inicializar un contador. El resultado se almacena como bogomips como una "
+"manera de hacer un \"benchmark\" de la CPU."
+
+#: ../../any.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Volver a ejecutar 'lilo'"
+msgid "Image"
+msgstr "Imagen"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-"隆No se puede volver a iniciar LiLo!\n"
-"Ejecute \"lilo\" como root en la l铆nea de comandos para completar la "
-"instalaci贸n del tema de LiLo."
+"No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Construir initrd mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Remote Administration"
+msgstr "Administraci贸n remota"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "No se puede ejecutar mkinitrd -f /boot/initrd-%s.img %s."
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
+"El soporte PCMCIA no existe en los n煤cleos 2.2. Por favor, utilice un n煤cleo "
+"2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+msgid "Selected All"
+msgstr "Seleccionar todas."
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-"No se puede escribir /etc/sysconfig/bootsplash\n"
-"No se encuentra el archivo."
+"CUPS - Common Unix Printing System (Sistema de impresi贸n com煤n de Unix)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Write %s"
-msgstr "Escribir %s"
+msgid "Webmin Service"
+msgstr "Servicio Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "No se puede escribir /etc/sysconfig/bootsplash."
+msgid "device"
+msgstr "dispositivo"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo message not found"
-msgstr "no se encuentra el mensaje de LiLo"
+msgid "All"
+msgstr "Todo"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Copiar %s a %s"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "驴Qu茅 sistema de impresi贸n (spooler) desea usar?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Copiar %s a %s.old"
+msgid "Greece"
+msgstr "Grecia"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Crear un tema nuevo"
+msgid "An error occurred"
+msgstr "Ocurri贸 un error"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
-"Mostrar tema\n"
-"bajo la consola"
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Install themes"
-msgstr "Instalar temas"
+"Se debe actualizar este paquete\n"
+"驴Est谩 seguro que quiere desmarcarlo?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Modo de Lilo/Grub"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (disposici贸n de m谩quina de escribir)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Modo de Yaboot"
+msgid "manual"
+msgstr "manual"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>S"
+msgid "Printer manufacturer, model, driver"
+msgstr "Fabricante de la impresora, modelo, controlador"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Archivo/_Salir"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"No hay soporte alguno, o est谩 protegido contra escritura, en el dispositivo %"
+"s.\n"
+"Por favor, inserte uno."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Archivo"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"El directorio %s ya tiene algunos datos\n"
+"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configuraci贸n del estilo de arranque"
+msgid "Printer on NetWare server"
+msgstr "Impresora en un servidor NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "隆No hay un navegador disponible! Por favor, instale uno"
+msgid "Give the ram size in MB"
+msgstr "Proporcione el tama帽o de la RAM en MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "conectando con el asistente Bugzilla..."
+msgid "Real name"
+msgstr "Nombre y apellidos"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Package not installed"
-msgstr "Paquete no instalado"
+msgid "done"
+msgstr "hecho"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not installed"
-msgstr "No instalado"
+msgid "Please uncheck or remove it on next time."
+msgstr "Por favor, desmarque o qu铆telo la pr贸xima vez."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Herramientas 'standalone'"
+msgid "Higher"
+msgstr "M谩s alta"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Report"
-msgstr "Reporte"
+msgid "Choose the partitions you want to format"
+msgstr "Elija las particiones que desea formatear"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"No se detect贸 tarjeta de TV en su m谩quina. Por favor, verifique que tiene "
+"conectada correctamente una tarjeta de v铆deo/TV soportada por Linux.\n"
"\n"
"\n"
-"Para enviar un reporte de errores, haga clic sobre el bot贸n Reporte.\n"
-"Esto abrir谩 una ventana del navegador web en https://drakbug.mandrakesoft."
-"com\n"
-"donde encontrar谩 un formulario para completar. La informaci贸n que se\n"
-"muestra arriba ser谩 transferida a ese servidor\n"
+"Puede visitar nuestra base de datos de hardware en:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Versi贸n:"
+msgid "Can't find %s on %s"
+msgstr "No puedo encontrar %s en %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "N煤cleo:"
+msgid "Japanese 106 keys"
+msgstr "Japon茅s de 106 teclas"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paquete:"
+msgid "This will take a few minutes."
+msgstr "Esto tomar谩 algunos minutos."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplicaci贸n:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Asistentes de configuraci贸n"
+msgid "Use scanners on remote computers"
+msgstr "Usar los esc谩neres en computadoras remotas"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Borrar la regla seleccionada"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Herramienta para migrar desde Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Accediendo impresoras en servidores CUPS remotos"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Inserte un disquete en %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Administrador de software"
+msgid "Maldives"
+msgstr "Maldivas"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Control remoto"
+msgid "compact"
+msgstr "compacto"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuto"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "en el canal %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", dispositivo multifunci贸n"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Herramienta de sincronizaci贸n"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"No hay particiones FAT para redimensionar (o no queda espacio suficiente)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Aisstente Inicial"
+msgid "Up"
+msgstr "Subir"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Centro de control de Mandrake"
+msgid "Firewall"
+msgstr "Cortafuegos"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Herramienta de Reporte de Errores de Mandrake"
+msgid "Area:"
+msgstr "脕rea:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Par谩metros"
+msgid "(E)IDE/ATA controllers"
+msgstr "Controladores (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configuraci贸n de la conexi贸n a Internet"
+msgid "Printer Server"
+msgstr "Servidor de impresi贸n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr "Desconexi贸n desde la Internet completa."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Tarjeta ethernet"
+msgid "Custom configuration"
+msgstr "Configuraci贸n personalizada"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Pasarela"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Por favor, indique donde estar谩 disponible la imagen de instalaci贸n.\n"
+"\n"
+"Si no tiene un directorio existente, por favor copie el contenido del CD o "
+"del DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Tipo de conexi贸n: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre y Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Perfil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Problemas durante la restauraci贸n:\n"
+"\n"
+"Durante el paso de restauraci贸n, Drakbackup verificar谩 todos los\n"
+"archivos de respaldo antes de restaurarlos.\n"
+"Antes de la restuaraci贸n, Drakbackup quitar谩 el\n"
+"directorio original, y perder谩 todos los datos en el mismo.\n"
+"Es importante ser cuidadoso y no modificar los archivos de\n"
+"datos de respaldo a mano.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Configuraci贸n de la conexi贸n a Internet"
+msgid "saving Bootsplash theme..."
+msgstr "guardando tema de Bootsplash..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No tiene ninguna conexi贸n a Internet.\n"
-"Primero debe crear una haciendo clic sobre 'Configurar'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Todav铆a no se ha configurado esta interfaz.\n"
-"Lance el asistente de configuraci贸n en la ventana principal"
+msgid "Do you have another one?"
+msgstr "驴Tiene alguna otra?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "activar ahora"
+msgid ", printing to %s"
+msgstr ", imprimiendo en %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "desactivar ahora"
+msgid "Assign host name from DHCP address"
+msgstr "Asignar nombre de m谩quina desde direcci贸n DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "cliente DHCP"
+msgid "Toggle to normal mode"
+msgstr "Cambiar al modo normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Iniciado al arranque"
+msgid "Generic"
+msgstr "Gen茅rico"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocolo de arranque"
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindros %d a %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
+msgid "New profile..."
+msgstr "Nuevo perfil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Configuraci贸n LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "驴A qu茅 disco desea desplazarla?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Configuraci贸n de la red local"
+msgid "Display logo on Console"
+msgstr "Mostrar logo en la consola"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No tiene configurada ninguna interfaz.\n"
-"Configure la primera haciendo clic sobre 'Configurar'"
+msgid "Windows Domain"
+msgstr "Dominio Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Conectar..."
+msgid "Interface %s (on network %s)"
+msgstr "Interfaz %s (en la red %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Desconectar..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "No conectado"
+msgid "Wallis and Futuna"
+msgstr "Wallis y Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Conectado"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "隆Primero debe crear /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "FPU est谩 presente"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "No se encontraron esc谩neres disponibles en su sistema.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Atenci贸n, se ha detectado otra conexi贸n con la Internet, tal vez est谩 usando "
-"su red"
+"No hay informaci贸n adicional para\n"
+"este servicio. Disculpe."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Interfaz:"
+msgid "Build Single NIC -->"
+msgstr "Construir NIC 煤nica -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Pasarela:"
+msgid "Is this correct?"
+msgstr "驴Es correcto?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Aplicar"
+msgid "Marshall Islands"
+msgstr "Islas Marshall"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Haga clic aqu铆 para lanzar el asistente ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Asistente..."
+msgid "Root password"
+msgstr "Contrase帽a de root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Estado:"
+msgid "Build All Kernels -->"
+msgstr "Construir todos los n煤cleos -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tipo:"
+msgid "if set to yes, report unowned files."
+msgstr "si se pone en s铆, reportar archivos sin due帽o."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Acceso a Internet"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"No dispone de una partici贸n de intercambio\n"
+"\n"
+"驴Desea continuar de todas formas?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Nombre de la m谩quina: "
+msgid "Server IP missing!"
+msgstr "隆Falta la IP del servidor!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configurar la red de 谩rea local..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Estado"
+msgid "Enable ACPI"
+msgstr "Habilitar ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Controlador"
+msgid "Graphical Environment"
+msgstr "Entorno gr谩fico"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protocolo"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interfaz"
+msgid "on Tape Device"
+msgstr "en Dispositivo de Cinta"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Configurar el acceso a Internet..."
+msgid "Do nothing"
+msgstr "Hacer nada"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Por favor, espere"
+msgid "Delete Client"
+msgstr "Borrar cliente"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
+msgid "Filesystem type: "
+msgstr "Tipo de sistema de. archivos: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Nuevo perfil..."
+msgid "Starting network..."
+msgstr "Iniciando la red ..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Perfil a borrar:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Borrar perfil..."
+msgid "/_Fields description"
+msgstr "/_Descripci贸n de los campos"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraci贸n de la red (%d adaptadores)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimice su seguridad"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"El administrador de conexi贸n X11 le permite conectarse gr谩ficamente\n"
-"a su sistema con el X Window System corriendo y soporta correr varias\n"
-"sesiones X diferentes en su m谩quina local a la vez."
+msgid "Help"
+msgstr "Ayuda"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Eligiendo un administrador de conexi贸n"
+msgid "Your personal phone number"
+msgstr "Su n煤mero de tel茅fono personal"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "驴Qu茅 tama帽o desea conservar para Windows en la"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"No se puede cerrar mkbootdisk adecuadamente: \n"
-" %s \n"
-" %s"
+"La(s) p谩gina(s) de prueba se enviaron al demonio de impresi贸n.\n"
+"Puede que pase algo de tiempo antes de que comience la impresi贸n.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "No se puede hacer fork: %s"
+msgid "Username required"
+msgstr "Se necesita nombre de usuario"
-#: ../../standalone/drakfloppy:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"No hay soporte alguno, o est谩 protegido contra escritura, en el dispositivo %"
-"s.\n"
-"Por favor, inserte uno."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Aseg煤rese que hay un soporte para el dispositivo %s"
+"Dependiendo del idioma predeterminado que eligi贸 en , DrakX selecciona\n"
+"autom谩ticamente un tipo particular de configuraci贸n del teclado. Sin\n"
+"embargo, podr铆a no tener un teclado que se corresponde exactamente con su\n"
+"idioma: por ejemplo, si Usted es un argentino que habla ingl茅s, todav铆a\n"
+"podr铆a desear que su teclado sea un teclado ingl茅s. O si habla castellano\n"
+"pero est谩 en Inglaterra puede estar en la misma situaci贸n en la cual su\n"
+"idioma nativo y su teclado no coinciden. En cualquier caso, este paso de\n"
+"instalaci贸n le permitir谩 elegir un teclado apropiado de una lista.\n"
+"\n"
+"Haga clic sobre el bot贸n \"%s\" para que se le presente la lista completa\n"
+"de los teclados soportados.\n"
+"\n"
+"Si eligi贸 una distribuci贸n de teclado basada en un alfabeto no latino, el\n"
+"pr贸ximo di谩logo le permitir谩 elegir la combinaci贸n de teclas que cambiar谩\n"
+"la distribuci贸n del teclado entre la latina y la no latina."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Crear el disquete"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Salida"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumentos: (arg)\n"
+"\n"
+"Aceptar/Rechazar mensajes de error IPv4 simulados."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Quitar un m贸dulo"
+msgid "mkinitrd optional arguments"
+msgstr "argumentos opcionales para mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Agregar un m贸dulo"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Navegue la web con Mozilla o Konqueror, lea su correo electr贸nico con "
+"Evolution o KMail, cree sus documentos con OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "omitir m贸dulos scsi"
+msgid "Protocol for the rest of the world"
+msgstr "Protocolo para el resto del mundo"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "si es necesario"
+msgid "Print test pages"
+msgstr "Imprimir la(s) p谩gina(s) de prueba"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "omitir m贸dulos raid"
+msgid "64 MB or more"
+msgstr "64 MB o m谩s"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "forzar"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Por favor, seleccione las p谩ginas de prueba que quiere imprimir.\n"
+"Nota: la p谩gina de prueba de foto puede tardar mucho tiempo en ser impresa e "
+"incluso en impresoras l谩ser con muy poca memoria puede que no salga. En la "
+"mayor铆a de los casos, basta con imprimir la p谩gina de prueba est谩ndar."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "argumentos opcionales para mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Por favor, seleccione el dispositivo donde est谩 conectado su %s"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "脕rea experta"
+msgid "Not formatted\n"
+msgstr "No formateado\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "versi贸n del n煤cleo"
+msgid "Periodic Checks"
+msgstr "Verificaciones peri贸dicas"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "predeterminado"
+msgid "PXE Server Configuration"
+msgstr "Configuraci贸n del servidor PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "General"
+msgid "Backup the system files before:"
+msgstr "Respaldar los archivos del sistema anteriores a:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "Creado de disquetes que arrancan"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"脡ste es el nivel de seguridad est谩ndar recomendado para una m谩quina que se\n"
+"utilizar谩 para conectarse a la Internet como cliente."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Primera disquetera"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Tama帽o"
+msgid "/File/_Quit"
+msgstr "/Archivo/_Salir"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Nombre del m贸dulo"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post-desinstalaci贸n"
+msgid "Choose the new size"
+msgstr "Eligiendo el tama帽o nuevo"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Quitar tipograf铆as de su sistema"
+msgid "Media class"
+msgstr "Clase de soporte"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Pruebas iniciales"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Esta versi贸n de Scannerdrake deconoce al %s."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Post-instalaci贸n"
+msgid "Faroe Islands"
+msgstr "Islas Feroe"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalar y convertir tipograf铆as"
+msgid "Restart XFS"
+msgstr "Reiniciar XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copiar tipograf铆as en su sistema"
+msgid "Add host/network"
+msgstr "A帽adir host/red"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Quitar lista"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"si se pone en s铆, verificar contrase帽a vac铆a, sin contrase帽a en /etc/shadow "
+"y por usuarios con el id 0 que no sean root."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Seleccionar todas."
+msgid "Please enter the directory to save to:"
+msgstr "Por favor, ingrese el directorio donde guardar:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Deseleccionar todas."
+msgid "Model name"
+msgstr "Nombre del modelo"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "aqu铆 si no lo est谩."
+msgid "Albania"
+msgstr "Albania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "haga clic aqu铆 si est谩 seguro."
+msgid "No CDR/DVDR in drive!"
+msgstr "隆No hay CDR/DVDR en la unidad!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Instalar lista"
+msgid "British Indian Ocean Territory"
+msgstr "Territorio Brit谩nico del Oc茅ano 脥ndico"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Seleccione el archivo o directorio de tipograf铆as y haga clic sobre 'Agregar'"
+msgid "Normal Mode"
+msgstr "Modo normal"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Antes de instalar cualquier tipograf铆a, aseg煤rese que tiene derecho de "
-"usarlas\n"
-"e instalarlas en su sistema.\n"
+"Por favor, aseg煤rese que el servidor cron est谩 inclu铆do entre sus "
+"servicios.\n"
"\n"
-"-Puede instalar las tipograf铆as usando la manera normal. En casos raros,\n"
-"puede ser que tipograf铆as \"falsas\" congelen a su servidor X."
+"Note que, por ahora, todos los soportes de \"red\" tambi茅n utilizan el disco."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Impresoras gen茅ricas"
+msgid "Printer connection type"
+msgstr "Tipo de conexi贸n de la impresora"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "隆No hay ning煤n adaptador de red en su sistema!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Red %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayo"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Elija las aplicaciones que soportar谩n las tipograf铆as:"
+msgid "Option %s out of range!"
+msgstr "隆La opci贸n %s est谩 fuera de rango"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002 por MandrakeSoft \n"
-"\tDUPONT Sebastien (versi贸n original)\n"
-" CHAUMETTE Damien dchaumette\\@mandrakesoft.com\n"
-"\n"
-" Este programa es software libre; lo puede redistribuir y/o modificar\n"
-" bajo los t茅rminos de la Licencia P煤blica General GNU publicada por la\n"
-" Free Software Foundation; ya sea la versi贸n 2, o (a su elecci贸n)\n"
-" cualquier versi贸n posterior.\n"
-"\n"
-" Este programa se distribuye con la esperanza que resultar谩 煤til, pero\n"
-" SIN GARANT脥A ALGUNA; incluso sin la garant铆a impl铆cita de COMERCIABILIDAD\n"
-" o ADECUABILIDAD PARA UN PROP脫SITO PARTICULAR. Vea la Licencia P煤blica\n"
-" General GNU para m谩s detalles.\n"
-"\n"
-" Deber铆a haber recibido una copia de la Licencia P煤blica General GNU junto\n"
-" con este programa; de no ser as铆, escriba a la Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-" Gracias:\n"
-" - pfm2afm: \n"
-"\t por Ken Borgendale:\n"
-"\t Convertir un archivo .pfm de Windows a uno .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t por James Macnicol: \n"
-"\t type1inst genera archivos fonts.dir fonts.scale y Fontmap.\n"
-" - ttf2pt1: \n"
-"\t por Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convertir archivos de tipograf铆as ttf a tipograf铆as afm y pfb\n"
-"\n"
-"\n"
+msgid "Connect %s"
+msgstr "Conectar %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Acerca de"
+msgid "Restarting CUPS..."
+msgstr "Reiniciando CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Lista de tipograf铆as"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Tarjetas de Impresora/Escaner/Foto en \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Opciones avanzadas"
+msgid "Duplicate mount point %s"
+msgstr "Punto de montaje %s duplicado"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstalar tipograf铆as"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "si se pone en s铆, ejecutar verificaciones chkrootkit."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Obtener tipograf铆as de Windows"
+msgid "Connection Configuration"
+msgstr "Configuraci贸n de la conexi贸n"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Importaci贸n de tipograf铆as"
+msgid "Unknown|Generic"
+msgstr "Desconocido|Gen茅rico"
-#: ../../standalone/drakfont:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "hecho"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Es probable que cuando instale Mandrake Linux algunos paquetes se hayan\n"
+"actualizado desde la publicaci贸n inicial. Se pueden haber corregido algunos\n"
+"errores y solucionado problemas de seguridad. Para permitir que Usted se\n"
+"beneficie de estas actualizaciones, ahora se le propone transferirlas desde\n"
+"la Internet. Marque \"%s\" si tiene funcionando una conexi贸n con la\n"
+"Internet, o \"%s\" si prefiere instalar los paquetes actualizados m谩s\n"
+"tarde.\n"
+"\n"
+"Si elige \"%s\" se mostrar谩 una lista de lugares desde los que se pueden\n"
+"obtener las actualizaciones. Elija el m谩s cercano a Usted. Luego aparece un\n"
+"谩rbol de selecci贸n de paquetes: revise la selecci贸n y presione \"%s\" para\n"
+"transferir e instalar los paquetes seleccionados, o \"%s\" para abortar."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "Reiniciar XFS"
+msgid "Quit"
+msgstr "Salir"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Suprimir archivos de tipograf铆as"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Reiniciar XFS"
+msgid "Auto allocate"
+msgstr "Asignaci贸n autom谩tica"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Suprimir archivos temporales"
+msgid "Check bad blocks?"
+msgstr "驴Verificar el disco en busca de bloques malos?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "Construyendo Type1"
+msgid "Other MultiMedia devices"
+msgstr "Otros dispositivos multimedios"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "Conversi贸n de tipograf铆as PFM"
+msgid "No remote machines"
+msgstr "Ninguna m谩quina remota"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "Conversi贸n de tipograf铆as TTF"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Bienvenido al Asistente de configuraci贸n de Impresoras\n"
+"\n"
+"Este asistente lo ayudar谩 a instalar sus impresoras conectadas a esta "
+"computadora.\n"
+"\n"
+"Si tiene impresoras conectadas a esta m谩quina, por favor enci茅ndalas para "
+"que se puedan detectar autom谩ticamnte.\n"
+"\n"
+"Haga clic sobre \"Siguiente\" cuando est茅 listo, o sobre \"Cancelar\" si "
+"Usted no desea configurar sus impresoras ahora."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Referenciando a Ghostscript"
+msgid "Authentication NIS"
+msgstr "Autentificaci贸n NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Conversi贸n de tipograf铆as"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"La opci贸n \"Restringir las opciones de la l铆nea de comandos\"\n"
+"no tiene sentido sin contrase帽a"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "Instalaci贸n de True Type realizada"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Ahora, la conexi贸n compartida a Internet est谩 activada ahora"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "por favor, espere mientras corre ttmkfdir..."
+msgid "Card IO_0"
+msgstr "E/S_0 de la tarjeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalaci贸n de tipograf铆as True Type"
+msgid "United Arab Emirates"
+msgstr "Emiratos 脕rabes Unidos"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Copiar tipograf铆as"
+msgid "Card IO_1"
+msgstr "E/S_1 de la tarjeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Buscar tipograf铆as en la lista de instaladas"
+msgid "Thailand"
+msgstr "Tailandia"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "no se pueden encontrar tipograf铆as.\n"
+msgid "Routers:"
+msgstr "Routers:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Volver a seleccionar tipograf铆as correctas"
+msgid "Kazakhstan"
+msgstr "Kazajst谩n"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "no se pueden encontrar tipograf铆as en las particiones montadas"
+msgid "Display all available remote CUPS printers"
+msgstr "Mostrar todas las impresoras CUPS remotas"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "no se encontraron tipograf铆as"
+msgid "Mandrake Linux Installation %s"
+msgstr "Instalaci贸n %s de Mandrake Linux"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "analizar todas las tipograf铆as"
+msgid "Thai keyboard"
+msgstr "Teclado tailand茅s"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Desmarcar las tipograf铆as instaladas"
+msgid "Dialup options"
+msgstr "Opciones de llamada por m贸dem"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Buscar tipograf铆as instaladas"
+msgid "Bouvet Island"
+msgstr "Isla Bouvet"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Si no se proporciona un puerto, se tomar谩 631 como predeterminado."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"隆Bienvenido a la herramienta para compartir la conexi贸n a Internet!\n"
-"\n"
-"%s\n"
+"隆Cambie su CD-ROM!\n"
"\n"
-"Haga click sobre Configurar para lanzar el asistente de configuraci贸n."
+"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
+"lo haya hecho.\n"
+"Si no lo posee, pulse Cancelar para cancelar la instalaci贸n desde este CD-"
+"ROM."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Configuraci贸n de la conexi贸n compartida a Internet"
+msgid "Polish"
+msgstr "Polaco"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No se ha configurado la conexi贸n compartida a Internet."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuraci贸n ya se ha hecho, y ahora est谩 activada."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Red por webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuraci贸n ya se ha hecho, pero ahora est谩 desactivada."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"No se ha detectado ning煤n adaptador de red en su sistema. Por favor, ejecute "
+"la herramienta de configuraci贸n del hardware."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Se ha configurado todo.\n"
-"Ahora puede compartir su conexi贸n a Internet con otros ordenadores de su red "
-"de 谩rea local, usando la configuraci贸n autom谩tica de la red (DHCP)."
+msgid "Netmask"
+msgstr "M谩scara de red"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas al instalar el paquete %s"
+msgid "No hard drives found"
+msgstr "隆No se encontraron discos r铆gidos!"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando los scripts, instalando el software, iniciando los servidores..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Configurando..."
+msgid "2 buttons"
+msgstr "2 botones"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"隆Se encontr贸 un conflicto potencial de direcciones LAN en la configuraci贸n "
-"de %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "驴De qu茅 tipo es su conexi贸n RDSI?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La red local no finaliz贸 con `.0', saliendo."
+msgid "Label"
+msgstr "Etiqueta"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Volver a configurar la interfaz y el servidor DHCP"
+msgid "Save on floppy"
+msgstr "Guardar en un disquete"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "El \"lease\" m谩ximo (en segundos)"
+msgid "Printer auto-detection"
+msgstr "Detecci贸n autom谩tica de impresoras"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "El \"lease\" predeterminado (en segundos)"
+msgid "Which of the following is your ISDN card?"
+msgstr "驴Cu谩l de las siguientes es su tarjeta RDSI?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "Fin del rango de DHCP"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
+"Este servicio proporciona la funcionalidad de servidor NFS, que se "
+"configura\n"
+"a trav茅s del archivo /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "Comienzo del rango de DHCP"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "El nombre de dominio interno"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Aviso, una etiqueta cambi贸:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "La IP del servidor DNS"
+msgid "Number of capture buffers:"
+msgstr "Cantidad de b煤feres de captura :"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP de (este) servidor DHCP"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "驴Su elecci贸n? (0/1, por defecto '%s') "
-#: ../../standalone/drakgw:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Configuraci贸n del servidor DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Aqu铆 puede seleccionar opciones diferentes para la configuraci贸n del "
-"servidor DHCP.\n"
-"Si no conoce el significado de una opci贸n, simlpemente d茅jela como est谩.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Direcci贸n de red local"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Puedo mantener su configuraci贸n corriente y asumir que ya configur贸 un "
-"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
-"que us贸 para su red local; no la volver茅 a configurar y no tocar茅 la "
-"configuraci贸n de su servidor DHCP.\n"
+"Se debe formatear cualquier partici贸n nueva que ha sido definida para que\n"
+"se pueda utilizar (formatear significa crear un sistema de archivos)\n"
"\n"
-"La entrada DNS predeterminada es el Servidor de nombres de cach茅 configurado "
-"en el cortafuegos. Lo puede reemplazar, por ej., con la IP del DNS de su "
-"ISP.\n"
+"Puede desear volver a formatear algunas particiones ya existentes para\n"
+"borrar cualquier dato que pudieran contener. Si as铆 lo desea, por favor\n"
+"seleccione tambi茅n dichas particiones.\n"
"\n"
-"De lo contrario, puedo volver a configurar su interfaz y (volver a) "
-"configurar un servidor DHCP por Usted.\n"
+"Por favor note que no es necesario volver a formatear todas las particiones\n"
+"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
+"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
+"volver a formatear particiones que contienen datos que desea preservar\n"
+"(t铆picamente \"/home\")\n"
+"\n"
+"Por favor, tenga sumo cuidado cuando selecciona las particiones. Despu茅s de\n"
+"formatear se borrar谩n todos los datos en las particiones seleccionadas y no\n"
+"podr谩 recuperarlos en absoluto.\n"
+"\n"
+"Haga clic sobre \"%s\" cuando est茅 listo para formatear las particiones.\n"
+"\n"
+"Haga clic sobre \"%s\" si desea elegir otra partici贸n para la instalaci贸n\n"
+"de su sistema operativo Mandrake Linux nuevo.\n"
"\n"
+"Haga clic sobre \"%s\" si desea seleccionar las particiones en las que se\n"
+"buscar谩n bloques defectuosos en el disco."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Franc茅s"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Checo (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Detecci贸n de hardware en progreso"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Dispositivo de red"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Resumen"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Configuraci贸n corriente de `%s':\n"
-"\n"
-"Red: %s\n"
-"Direcci贸n IP: %s\n"
-"Atributo IP: %s\n"
-"Controlador: %s"
+"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
+"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Configuraci贸n corriente de la interfaz"
+msgid "Next"
+msgstr "Siguiente"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Mostrar la configuraci贸n corriente de la interfaz"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "No puede instalar el cargador de arranque en una partici贸n %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "No (s贸lo expertos)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Volver a configurar autom谩ticamente"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Atenci贸n, el adaptador de red (%s) ya est谩 configurado.\n"
"\n"
-"驴Desea volver a configurarlo autom谩ticamente?\n"
+"Bienvenido.\n"
"\n"
-"Puede hacerlo manualmente pero necesita saber lo que est谩 haciendo."
+"Los par谩metros de la instalaci贸n autom谩ticas est谩n disponibles en las "
+"secciones de la izquierda"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Interfaz de red ya configurada"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Por favor, elija qu茅 adaptador de red estar谩 conectado a su red de 谩rea "
-"local."
+"se necesita el paquete 'ImageMagick' para un funcionamiento correcto.\n"
+"Haga clic sobre \"Aceptar\" para instalarlo o sobre \"Cancelar\" para salir"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituano \"num茅rico\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"S贸lo hay un adaptador de red configurado en su sistema:\n"
+"Se quitar谩n los paquetes siguientes para permitir actualizar su sistema: %s\n"
"\n"
-"%s\n"
"\n"
-"Se va a configurar su red de 谩rea local con ese adaptador."
+"驴Realmente desea quitar estos paquetes?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Interfaz de red"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No se ha detectado ning煤n adaptador de red en su sistema. Por favor, ejecute "
-"la herramienta de configuraci贸n del hardware."
+msgid "NIS Domain"
+msgstr "Dominio NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "隆No hay ning煤n adaptador de red en su sistema!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Archivos de usuario:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interfaz %s"
+msgid "Antarctica"
+msgstr "Ant谩rtica"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaz %s (usando el m贸dulo %s)"
+msgid "Mount options"
+msgstr "Opciones de montaje"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Dispositivo de red"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Por favor, ingrese el nombre de la Interfaz conectada a la Internet.\n"
-"\n"
-"Ejemplos:\n"
-"\t\tppp+ para conexiones por m贸dem o DSL,\n"
-"\t\teth0, o eth1 para conexi贸n por cable,\n"
-"\t\tippp+ para una conexi贸n RDSI.\n"
+"Asignar dispositivos 'crudos' a dispositivos de bloque (como las particiones "
+"de los discos), para usar aplicaciones como Oracle o reproductores DVD"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Est谩 a punto de configurar su computadora para compartir la conexi贸n a "
-"Internet.\n"
-"Con esta caracter铆stica, otras computadoras de su red local podr谩n usar la "
-"conexi贸n a Internet de esta computadora.\n"
-"\n"
-"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
-"drakconnect antes de proceder.\n"
+"Argumentos: (arg, alert=1)\n"
"\n"
-"Nota: necesita un adaptador de red dedicado para configurar una red de 谩rea "
-"local (LAN)."
+"Habilitar/deshabilitar protecci贸n de enga帽o de resoluci贸n de nombres. Si\n"
+"\\fIalert\\fP es verdadero, tambi茅n reportar a syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Compartir la conexi贸n a Internet"
+msgid "Please wait, preparing installation..."
+msgstr "Preparando la instalaci贸n. Espere, por favor"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ahora, la conexi贸n compartida a Internet est谩 activa."
+msgid "Czech (QWERTZ)"
+msgstr "Checo (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Activando los servidores..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Id tarjeta de red (煤til para port谩tiles)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "rechazar"
+msgid "The port number should be an integer!"
+msgstr "隆El n煤mero de puerto debe ser un n煤mero entero!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "reconfigurar"
+msgid "You must choose an image file first!"
+msgstr "隆Primero debe elegir un archivo de imagen!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "activar"
+msgid "Restore from Hard Disk."
+msgstr "Restaurar desde el disco r铆gido."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuraci贸n de la conexi贸n compartida a la "
-"Internet.\n"
-"En este momento est谩 deshabilitada.\n"
-"\n"
-"驴Qu茅 desea hacer?"
+msgid "Add to LVM"
+msgstr "A帽adir al LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ahora, la conexi贸n compartida a Internet est谩 desactivada"
+msgid "DNS server"
+msgstr "Servidor DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ahora, la conexi贸n compartida a Internet est谩 inactiva."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad y Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Desactivando los servidores..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD y LPRng no soportan impresoras IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "desactivar"
+msgid "simple"
+msgstr "simple"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuraci贸n de la conexi贸n compartida a Internet.\n"
-"Ahora est谩 activa.\n"
-"\n"
-"驴Qu茅 desea hacer?"
+msgid "Clear all"
+msgstr "Borrar todas"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ahora, la conexi贸n compartida a Internet est谩 activada ahora"
+msgid "No test pages"
+msgstr "No hay p谩ginas de prueba"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Lo siento, s贸lo se soportan los n煤cleos 2.4."
+msgid "Adapter %s: %s"
+msgstr "Adaptador %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Islas Malvinas"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Modelo desconocido"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"No se instal贸 navegador en su sistema, por favor instale uno si desea "
-"navegar el sistema de ayuda"
+"si se pone en s铆, verificar archivos/directorios que todos pueden escribir."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autentificaci贸n"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Path"
-msgstr "Ruta"
+msgid "Backup Now"
+msgstr "Respaldar Ahora"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "group :"
-msgstr "grupo :"
+msgid "/_File"
+msgstr "/_Archivo"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user :"
-msgstr "usuario :"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Quitando la impresora de Star Office/OpenOffice.org/GIMP"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Selecci贸n de ruta"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Lanza el filtrado de paquetes para los n煤cleos de Linux de la serie 2.2,\n"
+"para configurar un cortafuegos que protege a su m谩quina de los ataques de la "
+"red."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "cuando est谩 marcado, el grupo y el due帽o no se cambiar谩n"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (disposici贸n ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Usar ID del grupo para la ejecuci贸n"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Usar ID del due帽o para la ejecuci贸n"
+msgid "Creating auto install floppy..."
+msgstr "Creando el disquete de instalaci贸n autom谩tica"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Usado para directorio:\n"
-" s贸lo el due帽o del directorio o archivo en este directorio lo puede borrar"
+msgid "Searching for scanners ..."
+msgstr "Buscando esc谩neres..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Partitioning"
+msgstr "Particionando"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Russia"
+msgstr "Rusia"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "bit pegajoso"
+msgid "ethernet card(s) detected"
+msgstr "tarjeta(s) de red detectada(s)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Property"
-msgstr "Propiedad"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permissions"
-msgstr "Permisos"
+msgid "Can't create catalog!"
+msgstr "隆No se puede crear cat谩logo!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Current user"
-msgstr "Usuario corriente"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Complete su configuraci贸n de seguridad con este software f谩cil de usar que "
+"combina componentes de alto rendimiento tales como un cortafuegos, un "
+"servidor y cliente de red privada virtual (VPN), un sistema de detecci贸n de "
+"intrusos y un administrador del tr谩fico."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "browse"
-msgstr "examinar"
+msgid "Not enough free space for auto-allocating"
+msgstr "No hay espacio libre suficiente para la asignaci贸n autom谩tica"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Editar regla corriente"
+msgid "Set root password"
+msgstr "Contrase帽a de root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "edit"
-msgstr "editar"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"No hay controlador libre para su tarjeta de sonido (%s), pero hay uno "
+"propietario en \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Borrar la regla seleccionada"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Se perder谩n todos los datos de la partici贸n %s tras cambiar su tama帽o"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "borrar"
+msgid "Internet connection configuration"
+msgstr "Configuraci贸n de la conexi贸n a Internet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "A帽adir una regla nueva al final"
+msgid "Scanning for TV channels"
+msgstr "Buscando canales de TV"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "a帽adir una regla"
+msgid "Kernel:"
+msgstr "N煤cleo:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Bajar un nivel la regla seleccionada"
+msgid "/_About..."
+msgstr "/_Acerca..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "Bajar"
+msgid "Bengali"
+msgstr "Indio (Bengal铆)"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Subir un nivel la regla seleccionada"
+msgid "Preference: "
+msgstr "Preferencia: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "Subir"
+msgid "Wizard..."
+msgstr "Asistente..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "seleccionar archivo a ver/editar"
+msgid "Services: %d activated for %d registered"
+msgstr "Servicios: %d activados de %d registrados"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm se utiliza para ver archivos a utilizar para ajustar los permisos, "
-"due帽os, y grupos por medio de msec.\n"
-"Tambi茅n puede editar sus reglas propias que sobre-escribir谩n las "
-"predeterminadas."
+msgid "Create a bootdisk"
+msgstr "Crear un disco de arranque"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "permisos"
+msgid "Solomon Islands"
+msgstr "Islas Salom贸n"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "grupo"
+msgid "(module %s)"
+msgstr "(m贸dulo %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "usuario"
+msgid "Workgroup"
+msgstr "Grupo de trabajo"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "ruta"
+msgid "Printer host name or IP"
+msgstr "Nombre de host o IP de la impresora"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ubicaci贸n del archivo auto_install.cfg"
+msgid "Host Path or Module"
+msgstr "Ruta del host o m贸dulo"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"Por favor indique donde se encuentra el archivo auto_install.cfg.\n"
-"\n"
-"D茅jelo en blanco si no desea configurar el modo de instalaci贸n autom谩tica.\n"
-"\n"
+"El nombre de la impresora s贸lo deber铆a contener letras, n煤meros y el gui贸n "
+"bajo"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"No se encontr贸 imagen de CD o DVD, por favor copie el programa de "
-"instalaci贸n y los archivos rpm"
+msgid "Show current interface configuration"
+msgstr "Mostrar la configuraci贸n corriente de la interfaz"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "No image found"
-msgstr "No se encontr贸 imagen"
+msgid "Development"
+msgstr "Desarrollo"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Installation image directory"
-msgstr "Directorio de imagen de instalaci贸n"
+msgid "Done"
+msgstr "Hecho"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Por favor, indique donde estar谩 disponible la imagen de instalaci贸n.\n"
-"\n"
-"Si no tiene un directorio existente, por favor copie el contenido del CD o "
-"del DVD.\n"
-"\n"
+msgid "Web Server"
+msgstr "Servidor web"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "脷ltima IP del rango de DHCP"
+msgid "\tDo not include System Files\n"
+msgstr "\tNo incluir archivos del sistema\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "Primera IP del rango de DHCP"
+msgid "Chile"
+msgstr "Chile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"El servidor DHCP permitir谩 a otras computadoras arrancar utilizando PXE en "
-"el rango de direcciones dado.\n"
+"Los controladores de impresi贸n de inkjet que proporciona Lexmark s贸lo "
+"admiten impresoras locales, no impresoras en m谩quinas remotas o servidores "
+"de impresi贸n. Por favor, conecte su impresora a un puerto local o "
+"config煤relo en la m谩quina a la que est谩 conectada."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"La direcci贸n de red es %s utilizando una m谩scara de red de %s.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Su dispositivo multifunci贸n se configur贸 autom谩ticamente para poder "
+"escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:%s\" "
+"para especificar el esc谩ner si tiene m谩s de uno) desde la l铆nea de comandos "
+"o con las interfaces gr谩ficas \"xscanimage\" o \"xsane\". Si est谩 usando "
+"GIMP, tambi茅n puede escanear seleccionado la entrada apropiada del men煤 "
+"\"Archivo\"/\"Adquirir\". Ejecute tambi茅n \"man scanimage\" en la l铆nea de "
+"comandos para obtener m谩s informaci贸n.\n"
"\n"
+"隆No utilice \"scannerdrake\" para este dispositivo!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfaz %s (en la red %s)"
+msgid "(already added %s)"
+msgstr "(%s ya fue a帽adido)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Por favor, elija la interfaz de red que se utilizar谩 para el servidor DHCP."
+msgid ", using command %s"
+msgstr ", usando comando %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Est谩 a punto de configurar su computadora para instalar un servidor PXE como "
-"servidor DHCP\n"
-"y un servidor TFTP para construir un servidor de instalaci贸n.\n"
-"Con esa caracter铆stica, otras computadoras en su red local se podr谩n "
-"instalar utilizando esta computadora como fuente.\n"
-"\n"
-"Debe asegurarse que ha configurado su acceso a la Red/Internet utilizando "
-"drakconnect antes de proceder.\n"
-"\n"
-"Nota: necesita un adaptador de red dedicado para configurar una red de 谩rea "
-"local (LAN)."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Las teclas Alt y Shift simult谩neamente"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Configuraci贸n del servidor de instalaci贸n"
+msgid "Flags"
+msgstr "Flags"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Configuraci贸n del servidor PXE"
+msgid "Add/Del Users"
+msgstr "A帽adir/Quitar usuarios"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Por favor espere, configurando las opciones de seguridad..."
+msgid "Host/network IP address missing."
+msgstr "Falta direcci贸n IP del host/red."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Por favor espere, configurando el nivel de seguridad..."
+msgid "weekly"
+msgstr "cada semana"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Verificaciones peri贸dicas"
+msgid "Settings"
+msgstr "Configuraci贸n"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Opciones de sistema"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "La IP del host/red ingresada no es correcta.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Opciones de red"
+msgid "Here is the full list of available countries"
+msgstr "Aqu铆 tiene la lista completa de pa铆ses disponibles"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "P谩gina de prueba alternativa (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Se pueden configurar las opciones siguientes para personalizar\n"
-"la seguridad de su sistema. Si necesita explicaci贸n, mire la ayuda "
-"emergente.\n"
+"Si tiene todos los CD de la lista siguiente, haga clic sobre \"Aceptar\".\n"
+"Si no tiene ning煤n CD, haga clic sobre \"Cancelar\".\n"
+"Si s贸lo le faltan algunos CD, desm谩rquelos y haga clic sobre \"Aceptar\"."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Administrador de seguridad:"
+msgid "Wait please"
+msgstr "Por favor, espere"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Alertas de seguridad:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Nivel de seguridad:"
+msgid "Backup user files"
+msgstr "Respaldar archivos de usuarios"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr " (valor predeterminado: %s)"
+msgid "New"
+msgstr "Nuevo"
-#: ../../standalone/draksec:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Est谩ndar: Este es el nivel est谩ndar recomendado para una computadora que se "
-"utilizar谩 para conectarse\n"
-"a la Internet como cliente.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Alta: Ya hay algunas restricciones, y m谩s verificaciones autom谩ticas se "
-"corren cada noche.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"M谩s alta: La seguridad ahora es lo suficientemente alta para utilizar el "
-"sistema como un servidor que\n"
-"puede aceptar conexiones de muchos clientes. Si su m谩quina s贸lo es un "
-"cliente de la Internet,\n"
-"deber铆a elegir un nivel m谩s bajo.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoico: Este es similar al nivel anterior, pero el sistema est谩 cerrado "
-"por completo y las\n"
-"caracter铆sticas de seguridad est谩n al m谩ximo.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Administrador de seguridad: Si se activa la opci贸n 'Alertas de seguridad', "
-"se enviar谩n las alertas\n"
-"de seguridad a este usuario (nombre o correo-e)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Este es el punto de decisi贸n m谩s crucial para la seguridad de su sistema\n"
+"GNU/Linux: tendr谩 que ingresar la contrase帽a de \"root\". El usuario\n"
+"\"root\" es el administrador del sistema y es el 煤nico autorizado a hacer\n"
+"actualizaciones, agregar usuarios, cambiar la configuraci贸n general del\n"
+"sistema, etc. Resumiendo, 隆\"root\" puede hacer de todo! Es por esto que\n"
+"deber谩 elegir una contrase帽a que sea dif铆cil de adivinar - DrakX le dir谩 si\n"
+"la que eligi贸 es demasiado f谩cil. Como puede ver no es forzoso ingresar una\n"
+"contrase帽a, pero le recomendamos encarecidamente que ingrese una. GNU/Linux\n"
+"es tan propenso a errores del operador como cualquier otro sistema\n"
+"operativo. Es importante que sea dif铆cil convertirse en \"root\" debido a\n"
+"que \"root\" puede sobrepasar todas las limitaciones y borrar, sin\n"
+"intenci贸n, todos los datos que se encuentran en las particiones accediendo\n"
+"a las mismas sin el cuidado suficiente.\n"
"\n"
+"La contrase帽a deber铆a ser una mezcla de caracteres alfanum茅ricos y tener al\n"
+"menos una longitud de 8 caracteres. Nunca escriba la contrase帽a de \"root\"\n"
+"- por ejemplo, en un papel - eso hace que sea muy f谩cil comprometer a un\n"
+"sistema.\n"
"\n"
+"Sin embargo, no deber铆a hacer la contrase帽a muy larga o complicada 隆debido\n"
+"a que Usted debe poder recordarla!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"La contrase帽a no se mostrar谩 en la pantalla a medida que Usted la teclee.\n"
+"Por lo tanto tendr谩 que teclear la contrase帽a dos veces para reducir la\n"
+"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
+"mismo error de tecleo, tendr谩 que utilizar esta contrase帽a \"incorrecta\"\n"
+"la primera vez que se conecte.\n"
"\n"
+"Si desea que el acceso a esta computadora est茅 controlado por un servidor\n"
+"de autenticaci贸n, haga clic sobre el bot贸n \"%s\".\n"
"\n"
+"Si su red usa los protocolos LDAP, NIS, o servicios de autenticaci贸n de PDC\n"
+"Dominio de Windows, seleccione el bot贸n apropiado como m茅todo de\n"
+"autenticaci贸n. Si no sabe cual utilizar, deber铆a preguntar al administrador\n"
+"de su red.\n"
"\n"
-"Nota: si tiene una tarjeta de sonido ISA PnP, tendr谩 que utilizar el "
-"programa sndconfig. Simplemente teclee \"sndconfig\" en una consola."
+"Si ocurre que tiene problemas para recordar contrase帽as, puede elegir el\n"
+"bot贸n \"%s\", si es que su computadora nunca estar谩 conectada a la Internet\n"
+"o Usted conf铆a absolutamente en cualquier persona que tenga acceso a la\n"
+"misma."
-#: ../../standalone/draksound:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"No se detect贸 tarjeta de sonido en su m谩quina. Por favor, verifique que "
-"tiene conectada correctamente una tarjeta de sonido soportada por Linux.\n"
-"\n"
-"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
-"\n"
+"En este punto, DrakX le permitir谩 elegir el nivel de seguridad deseado para\n"
+"la m谩quina. Como regla general, el nivel de seguridad deber铆a ser mayor\n"
+"cuanto m谩s cruciales sean los datos que tenga almacenados, o si la m谩quina\n"
+"estar谩 directamente expuesta a la Internet. No obstante, un nivel de\n"
+"seguridad m谩s alto generalmente se obtiene a expensas de la facilidad de\n"
+"uso.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Si no sabe cual elegir, no cambie la opci贸n predeterminada."
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "隆No se detect贸 tarjeta de sonido!"
+msgid "Load from floppy"
+msgstr "Cargar desde un disquete"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "Bootsplash de %s. No se puede crear la previsualizaci贸n (%s)"
+msgid "The following printer was auto-detected. "
+msgstr "Se detect贸 autom谩ticamente la impresora siguientes. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Generando previsualizaci贸n..."
+msgid "Boot Floppy"
+msgstr "Disquete de arranque"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "隆Primero debe elegir un archivo de imagen!"
+msgid "Norwegian"
+msgstr "Noruego"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "selecci贸n del color de la barra de progreso"
+msgid "Searching for new scanners ..."
+msgstr "Buscando esc谩neres nuevos..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "隆Todav铆a este tema no tiene un bootsplash en %s!"
+msgid "Apache World Wide Web Server"
+msgstr "Servidor de World Wide Web Apache"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Paso de la CPU (n煤mero de sub-modelo - generaci贸n)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "guardando tema de Bootsplash..."
+msgid "select path to restore (instead of /)"
+msgstr "seleccione la ruta para restaurar (en vez de /)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "choose image file"
-msgstr "elija un archivo de imagen"
+msgid "Configure bootsplash picture"
+msgstr "Configurar foto de bootsplash"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image"
-msgstr "elija imagen"
+msgid "China"
+msgstr "China"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Configurar foto de bootsplash"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr ""
+"(Debe asegurarse que todas sus impresoras est谩n conectadas y encendidas).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Predeterminadamente el mensaje del n煤cleo es \"silencioso\""
+msgid "Georgia"
+msgstr "Georgia"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Mostrar logo en la consola"
+msgid "Reading data of installed printers..."
+msgstr "Leyendo datos de impresoras instaladas..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose color"
-msgstr "elija color"
+msgid " Erase Now "
+msgstr " Borrar Ahora "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Save theme"
-msgstr "guardar tema"
+msgid "server"
+msgstr "servidor"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Preview"
-msgstr "previsualizar"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "el color de la barra de progreso"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "s铆, significa que el procesador tiene un coprocesador matem谩tico"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "la altura de la barra de progreso"
+msgid "Please Wait... Applying the configuration"
+msgstr "Espere, por favor... Aplicando la configuraci贸n"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "el ancho de la barra de progreso"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "隆Bienvenido a GRUB, el selector de SO de arranque!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"coordenada y del 谩ngulo superior\n"
-"izquierdo de la barra de progreso"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "SCSI controllers"
+msgstr "Controladores SCSI"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " en servidor LPD \"%s\", impresora \"%s\""
+
+#: ../../standalone/drakedm:1
+#, c-format
+msgid "Choosing a display manager"
+msgstr "Eligiendo un administrador de conexi贸n"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf Host name"
+msgstr "Nombre de la m谩quina Zeroconf"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr "Ecuador"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Add an item"
+msgstr "A帽adir un elemento"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"coordenada x del 谩ngulo superior\n"
-"izquierdo de la barra de progreso"
+"Las impresoras en esta m谩quina est谩n disponibles para otras computadoras"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text box height"
-msgstr "altura del cuadro de texto"
+msgid "I can't find needed image file `%s'."
+msgstr "No se encuentra el archivo de imagen `%s' necesario."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "text width"
-msgstr "ancho del texto"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"No se detect贸 tarjeta de sonido. Pruebe \"harddrake\" luego de la instalaci贸n"
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"coordenada y del cuadro de texto\n"
-"en cantidad de caracteres"
+"Puerto no v谩lido: %s.\n"
+"El formato adecuado es \"puerto/tcp\" o \"puerto/udp\", \n"
+"donde puerto es un n煤mero entre 1 y 65535."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Shell"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Santo Tom茅 y Pr铆ncipe"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-"coordenada x del cuadro de texto\n"
-"en cantidad de caracteres"
+"No se puede conectar utilizando el nombre de usuario %s (驴contrase帽a "
+"incorrecta?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Browse"
-msgstr "Examinar"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbadj谩n (lat铆n)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Theme name"
-msgstr "Nombre del tema"
+msgid "Package not installed"
+msgstr "Paquete no instalado"
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "final resolution"
-msgstr "resoluci贸n final"
+msgid "Become a MandrakeExpert"
+msgstr "Convi茅rtase en un MandrakeExpert"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "primer paso de creaci贸n"
+msgid "American Samoa"
+msgstr "Samoa Americana"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"se necesita el paquete 'ImageMagick' para un funcionamiento correcto.\n"
-"Haga clic sobre \"Aceptar\" para instalarlo o sobre \"Cancelar\" para salir"
+msgid "Protocol"
+msgstr "Protocolo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Copiar tipograf铆as en su sistema"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Ayuda de Harddrake"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
+msgstr "Bogomips"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Configuraci贸n del Servidor de Terminales de Mandrake"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
"\n"
-"You can visit our hardware database at:\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"No se detect贸 tarjeta de TV en su m谩quina. Por favor, verifique que tiene "
-"conectada correctamente una tarjeta de v铆deo/TV soportada por Linux.\n"
-"\n"
"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
+" Detalles del reporte de DrakBackup\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "隆No se detect贸 tarjeta de TV!"
+msgid "Restore all backups"
+msgstr "Restaurar todas las copias de respaldo"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "隆Ahora, puede ejecutar xawtv (!bajo X Window!)!\n"
+msgid "if set to yes, check open ports."
+msgstr "si se pone en s铆, verificar puertos abiertos."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
-msgstr "隆Que tenga un buen d铆a!"
+msgid "This may take a moment to erase the media."
+msgstr "Borrar el soporte puede tardar unos momentos."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "隆XawTV no est谩 instalado!"
+msgid "You can't select/unselect this package"
+msgstr "No puede seleccionar/deseleccionar este paquete"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Hubo un error mientras se buscaban canales de TV"
+msgid "Warning"
+msgstr "Advertencia"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Buscando canales de TV"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Otros archivos:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Buscando canales de TV, en progreso ..."
+msgid "Remote host name"
+msgstr "Nombre de host del servidor remoto"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Area:"
-msgstr "脕rea:"
+msgid "deactivate now"
+msgstr "desactivar ahora"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "TV norm:"
-msgstr "Norma de TV:"
+msgid "access to X programs"
+msgstr "acceso a programas X"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Por favor,\n"
-"teclee su norma de tv y pa铆s"
+msgid "Computing the size of the Windows partition"
+msgstr "Calculando el espacio de la partici贸n Windows"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Televisi贸n por cable Australian Optus"
+msgid "Italy"
+msgstr "Italia"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Nueva Zelanda"
+msgid "Name of printer"
+msgstr "Nombre de la impresora"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Francia [SECAM]"
+msgid "disable"
+msgstr "desactivar"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Europa del este"
+msgid "error unmounting %s: %s"
+msgstr "error desmontando %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Europa del oeste"
+msgid "Do it!"
+msgstr "隆Hacerlo!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr "China (difusi贸n)"
+msgid "Cayman Islands"
+msgstr "Islas Caim谩n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Jap贸n (cable)"
+msgid "%s not responding"
+msgstr "%s no responde"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Jap贸n (difusi贸n)"
+msgid "Select model manually"
+msgstr "Seleccionar el modelo manualmente"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canad谩 (cable)"
+msgid "Format"
+msgstr "Formatear"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "EEUU (cable-hrc)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"La forma m谩s com煤n de conexi贸n ADSL es con pppoe.\n"
+"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
+"Si no lo sabe con seguridad, elija 'usar pppoe'"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "EEUU (cable)"
+msgid "Various"
+msgstr "Varios"
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "EEUU (difusi贸n)"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"隆XawTV no est谩 instalado!\n"
"\n"
"\n"
-"Si tiene una tarjeta de TV pero DrakX no la detect贸 (\"/etc/modules\" no\n"
-"tiene el m贸dulo bttv ni saa7134) ni instal贸 xawtv, por favor env铆e\n"
-"el resultado de \"lspcidrake -v -f\" a \"install@mandrakesoft.com\" con\n"
-"el tema \"undetected TV card\".\n"
-"\n"
-"Lo puede instalar tecleando \"urpmi xawtv\", como root, en la consola."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
-msgstr "primario"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "secondary"
-msgstr "secundario"
+"Printerdrak no pudo determinar qu茅 modelo es su impresora %s. Por favor, "
+"escoja el modelo correcto de la lista."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Haga clic sobre un dispositivo en el 谩rbol de la izquierda para obtener aqu铆 "
-"informaci贸n sobre el mismo."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Unknown"
-msgstr "Desconocido"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "unknown"
-msgstr "desconocido"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Ejecutando \"%s\" ..."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Run config tool"
-msgstr "Ejecutar herramienta de configuraci贸n"
+"\n"
+"Marque las impresoras que desea transferir y haga clic \n"
+"sobre \"Transferir\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Configurar m贸dulo"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informaci贸n"
+msgid "Albanian"
+msgstr "Albano"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Hardware detectado"
+msgid "Lithuania"
+msgstr "Lituania"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 versi贸n"
+msgid "Compact"
+msgstr "Compacto"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Detecci贸n en progreso"
+msgid "Detected model: %s %s"
+msgstr "Modelo detectado: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft ha seleccionado el mejor software para Usted"
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"Este es HardDrake, una herramienta de configuraci贸n de hardware de "
"Mandrake.\n"
"Versi贸n:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Acerca de Harddrake"
+msgid "Local files"
+msgstr "Archivos locales"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Acerca..."
+msgid "maybe"
+msgstr "quiz谩s"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Reportar un error"
+msgid "Panama"
+msgstr "Panam谩"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-"Una vez que seleccion贸 un dispositivo, podr谩 ver informaci贸n sobre el mismo "
-"en los campos mostrados en el marco derecho (\"Informaci贸n\")"
+"Parece que su tarjeta gr谩fica tiene un conector de salida para TV.\n"
+"Se puede configurar para trabajar con el frame-buffer.\n"
+"\n"
+"Para esto Usted tiene que conectar su tarjeta gr谩fica a su TV antes de "
+"arrancar su computadora.\n"
+"Luego, elija la entrada \"TVout\" en el cargador de arranque\n"
+"\n"
+"驴Tiene Usted esta caracter铆stica?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "隆Seleccione un dispositivo!"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Descripci贸n de los campos:\n"
+"Est谩 a punto de configurar la impresi贸n a una cuenta Windows con contrase帽a. "
+"Debido a una falla en la arquitectura del cliente Samba la contrase帽a se "
+"pone como texto plano en la l铆nea de comandos del cliente Samba que se usa "
+"para transmitir el trabajo de impresi贸n al servidor Windows. Por lo tanto, "
+"es posible que cada usuario de esta m谩quina vea la clave en pantalla "
+"ejecutando \"ps auxwww\".\n"
+"\n"
+"Recomendamos utilizar alguna de las alternativas siguientes (en todos los "
+"casos tiene que asegurarse que s贸lo las m谩quinas de su red local tienen "
+"acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
+"\n"
+"Usar una cuenta sin contrase帽a en su servidor Windows, por ej. la cuenta "
+"\"GUEST\" o una cuenta especial dedicada a la impresi贸n. No quite la "
+"protecci贸n con contrase帽a de una cuenta personal o de la cuenta del "
+"administrador.\n"
+"\n"
+"Configure a su servidor Windows para que la impresi贸n est茅 disponible bajo "
+"el protocolo LPD y configure la impresi贸n desde esta m谩quina bajo el tipo de "
+"conexi贸n \"%s\" en PrinterDrake.\n"
"\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Ayuda de Harddrake"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Descripci贸n de los campos"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/A_yuda"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Quit"
-msgstr "/_Salir"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Autodetectar unidades _jazz"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil colores (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Autodetectar _m贸dems"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Guardar en el disco en la ruta: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Autodetectar im_presoras"
+msgid "Size: %d KB\n"
+msgstr "Tama帽o: %d KB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opciones"
+msgid "Remove fonts on your system"
+msgstr "Quitar tipograf铆as de su sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "el nombre del fabricante del procesador"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Atenci贸n, el adaptador de red (%s) ya est谩 configurado.\n"
+"\n"
+"驴Desea volver a configurarlo autom谩ticamente?\n"
+"\n"
+"Puede hacerlo manualmente pero necesita saber lo que est谩 haciendo."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "el nombre del fabricante del dispositivo"
+msgid "Graphical interface at startup"
+msgstr "X al arrancar"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "El tipo de bus sobre el que est谩 conectado el rat贸n"
+msgid "Please enter the directory to save:"
+msgstr "Por favor, ingrese el directorio a guardar:"
#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Paso de la CPU (n煤mero de sub-modelo - generaci贸n)"
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Formatos que acepta la disquetera"
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "Model stepping"
-msgstr "Paso del modelo"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "el n煤mero del procesador"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Est谩n configuradas las impresoras siguientes. Haga doble clic sobre una de "
+"ellas para modificarla, para configurarla como predeterminada, o para "
+"obtener informaci贸n sobre la misma."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Processor ID"
-msgstr "ID del procesador"
+msgid "Connected"
+msgstr "Conectado"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "network printer port"
-msgstr "puerto de impresora de red"
+msgid "USB printer \\#%s"
+msgstr "Impresora USB \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "el nombre de la CPU"
+msgid "Macedonian"
+msgstr "Macedonio"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Name"
-msgstr "Nombre"
+msgid "Bridges and system controllers"
+msgstr "Puentes y controladores del sistema"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "la cantidad de botones que tiene el rat贸n"
+msgid "/File/_Save"
+msgstr "/Archivo/_Guardar"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "Cantidad de botones"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Nombre oficial del fabricante de la CPU"
+msgid "No details"
+msgstr "Sin detalles"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Model name"
-msgstr "Nombre del modelo"
+msgid "very nice"
+msgstr "muy bueno"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Generaci贸n de la CPU (ej: 8 para PentiumIII, ...)"
+msgid "Preview"
+msgstr "previsualizar"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Model"
-msgstr "Modelo"
+msgid "Remote Control"
+msgstr "Control remoto"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "hard disk model"
-msgstr "modelo de disco r铆gido"
+msgid "Please select media for backup..."
+msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "clase de dispositivo de hardware"
+msgid "XFree86 server: %s\n"
+msgstr "Servidor XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
-msgstr "Clase de soporte"
+msgid "Allow Thin Clients"
+msgstr "Permitir Clientes livianos"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Sub-generaci贸n de la CPU"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgiano (estilo \"ruso\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Level"
-msgstr "Nivel"
+msgid "/_Options"
+msgstr "/_Opciones"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Formatos que acepta la disquetera"
+msgid "Your printer model"
+msgstr "El modelo de su impresora"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Formato del disquete"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
+msgstr ""
+"\n"
+"\n"
+"(隆ATENCI脫N! Est谩 utilizando XFS en su partici贸n ra铆z,\n"
+"la creaci贸n de un disquete de arranque en un disquete de 1.44Mb puede "
+"fallar\n"
+"porque XFS necesita un controlador muy grande)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-"Algunos de los primeros chips i486DX-100 no pueden volver a modo operativo "
-"sin problemas luego que se ejecuta la instrucci贸n \"halt\""
+"\n"
+"- Borrar los archivos tar del disco luego de la copia de respaldo.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "Bug de Halt"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+"No se encontr贸 imagen de CD o DVD, por favor copie el programa de "
+"instalaci贸n y los archivos rpm"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"Los primeros Pentium eran defectuosos y se colgaban decodificando el c贸digo "
-"de bytes F00F"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Herramienta de configuraci贸n multiprop贸sito de Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
-msgstr "Bug F00F"
+msgid "Save"
+msgstr "Guardar"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"s铆, siginfica que el coprocesador matem谩tico tiene adjunto un vector de "
-"excepciones"
+msgid "The %s is unsupported"
+msgstr "El %s no est谩 soportado"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Si la FPU tiene o no un vector de irq"
+msgid "Load the drivers for your usb devices."
+msgstr "Carga los controladores para sus dispositivos USB."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "s铆, significa que el procesador tiene un coprocesador matem谩tico"
+msgid "Disk"
+msgstr "Disco"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "FPU est谩 presente"
+msgid "Enter a printer device URI"
+msgstr "Introduzca el URI del dispositivo de impresi贸n"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Los chips Intel Pentium fabricados primero tienen un bug en el procesador de "
-"coma flotante que no lograba la precisi贸n deseada cuando se realizaba una "
-"divisi贸n de coma flotante (FDIV)"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr "Bug de Fdiv"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Flags del CPU reportados por el n煤cleo"
+"El 茅xito de MandrakeSoft se basa en el principio del Software Libre. Su "
+"sistema operativo nuevo es el resultado del trabajo colaborativo de parte de "
+"la Comunidad Linux mundial"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Flags"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "el m贸dulo del n煤cleo GNU/Linux que maneja ese dispositivo"
+msgid "French Guiana"
+msgstr "Guayana Francesa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module"
-msgstr "M贸dulo"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-"dispositivo din谩mico nuevo generado por el devfs incorporado del n煤cleo"
+msgid "add a rule"
+msgstr "a帽adir una regla"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Dispositivo devfs nuevo"
+msgid "A command line must be entered!"
+msgstr "隆Debe ingresar un comando!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "nombre antiguo de dispositivo est谩tico utilizado en el paquete dev"
+msgid "Select user manually"
+msgstr "Seleccionar manualmente el usuario"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Archivo de dispositivo antiguo"
+msgid "Transfer printer configuration"
+msgstr "Transferir configuraci贸n de la impresora"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Este campo describe al dispositivo"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "驴Desea habilitar la impresi贸n en las impresoras mencionadas arriba?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-"La frecuencia de la CPU en MHz (Megahertz que en una primera aproximaci贸n se "
-"puede considerar como la cantidad de millones instrucciones que la CPU puede "
-"ejecutar por segundo)"
+"Para que esto funcione con un PDC de W2K, probablemente necesite que el "
+"administrador ejecute: C:\\>net localgroup \"Pre-Windows 2000 Compatible "
+"Access\" everyone /add y vuelva a iniciar el servidor.\n"
+"Tambi茅n necesitar谩 el nombre de usuario/contrase帽a de un Administrador de "
+"Dominio para unir la m谩quina al dominio Windows(TM).\n"
+"Si todav铆a no est谩 habilitada la red, DrakX intentar谩 unirse al dominio "
+"luego de la etapa de configuraci贸n de red.\n"
+"Si esta configuraci贸n falla por alg煤n motivo y no funciona la autenticaci贸n "
+"PDC, ejecute 'smbpasswd -j DOMINIO -U USUARIO%%CONTRASE脩A' utilizando su "
+"Dominio Windows(TM), y Nombre de usuario/Contrase帽a de Administrador, luego "
+"del arranque del sistema.\n"
+"El comando 'wbinfo -t' probar谩 si sus secretos de autenticaci贸n son buenos."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frecuencia (MHz)"
+msgid "%s (Port %s)"
+msgstr "%s (Puerto %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid "Use network connection to backup"
+msgstr "Usar conexi贸n de red para realizar copia de respaldo"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"Nivel de informaci贸n que se puede obtener por medio de la instrucci贸n cpuid"
+"Argumentos: (arg)\n"
+"\n"
+"Habilitar/Deshabilitar sulogin(8) en nivel de usuario 煤nico."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Nivel de cpuid"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Ahora es el momento de especificar los programas que desea instalar en su\n"
+"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y para\n"
+"hacer m谩s simple el manejo de los paquetes, los mismos se han puesto en\n"
+"grupos de aplicaciones similares.\n"
+"\n"
+"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
+"su m谩quina. Mandrake Linux tiene cuatro instalaciones predefinidas\n"
+"disponibles. Puede pensar en estas clases de instalaci贸n como contenedores\n"
+"para los distintos paquetes. Puede mezclar y hacer coincidir aplicaciones\n"
+"de varios grupos, por lo que una instalaci贸n de \"Estaci贸n de trabajo\"\n"
+"puede tener instaladas aplicaciones del grupo \"Desarrollo\".\n"
+"\n"
+" * \"%s\": si planifica utilizar su m谩quina como una estaci贸n de trabajo,\n"
+"seleccione una o m谩s aplicaciones del grupo estaci贸n de trabajo.\n"
+"\n"
+" * \"%s\": si la m谩quina se utilizar谩 para programaci贸n, elija los paquetes\n"
+"apropiados de ese grupo.\n"
+"\n"
+" * \"%s\": si pretende usar la m谩quina como un servidor, seleccione cu谩les\n"
+"de los servicios m谩s comunes desea instalar en su m谩quina.\n"
+"\n"
+" * \"%s\": aqu铆 es donde seleccionar谩 su entorno gr谩fico preferido. Si\n"
+"desea tener una estaci贸n de trabajo gr谩fica, debe seleccionar al menos uno.\n"
+"\n"
+"Si mueve el cursor del rat贸n sobre el nombre de un grupo se mostrar谩 un\n"
+"peque帽o texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
+"grupos cuando est谩 realizando una instalaci贸n regular (es decir, no una\n"
+"actualizaci贸n), aparecer谩 un di谩logo que propone opciones diferentes para\n"
+"una instalaci贸n m铆nima:\n"
+"\n"
+" * \"%s\": instala la menor cantidad de paquetes posible para tener un\n"
+"escritorio gr谩fico que funcione.\n"
+"\n"
+" * \"%s\": instala el sistema base m谩s algunos utilitarios b谩sicos y la\n"
+"documentaci贸n de los mismos. Esta instalaci贸n es adecuada para configurar\n"
+"un servidor.\n"
+"\n"
+" * \"%s\": instalar谩 el m铆nimo necesario estricto para obtener un sistema\n"
+"Linux que funciona. Con esta instalaci贸n s贸lo tendr谩 una interfaz de l铆nea\n"
+"de comandos. Esta instalaci贸n ocupa alrededor de 65 MB.\n"
+"\n"
+"Puede marcar la casilla \"%s\" que es 煤til si est谩 familiarizado con los\n"
+"paquetes que se ofrecen, o si desea tener un control total sobre lo que se\n"
+"instalar谩.\n"
+"\n"
+"Si inici贸 la instalaci贸n en el modo \"%s\" puede deseleccionar todos los\n"
+"grupos para evitar instalar cualquier paquete nuevo. Esto es 煤til para\n"
+"reparar o actualizar un sistema existente."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Familia de la CPU (ej: 6 para clase i686)"
+msgid "Accept user"
+msgstr "Aceptar el usuario"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Familia de cpuid"
+msgid "Server"
+msgstr "Servidor"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Si esta CPU tiene o no el bug de la coma de Cyrix 6x86"
+msgid "Bad choice, try again\n"
+msgstr "Elecci贸n incorrecta, int茅ntelo de nuevo\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Bug de la coma"
+msgid "Heard and McDonald Islands"
+msgstr "Islas Heard y McDonald"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"capacidades especiales del controlador (posibilidad de grabar y/o soporte de "
-"DVD)"
+msgid "No alternative driver"
+msgstr "No hay controlador alternativo"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Capacidad de la unidad"
+msgid "Toggle to expert mode"
+msgstr "Cambiar al modo experto"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Tama帽o del cach茅 del CPU (de 2do nivel)"
+msgid "(on this machine)"
+msgstr "(en esta m谩quina)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Tama帽o del cach茅"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Las direcciones de la pasarela deber铆an estar en el formato 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- dispositivos PCI: el z贸calo PCI, dispositivo y funci贸n de esta tarjeta\n"
-"- dispositivos EIDE: el dispositivo es o bien uno maestro o uno esclavo\n"
-"- dispositivos SCSI: el bus SCSI y los id de dispositivo SCSI"
+"winmodem basado en \"%s\" detectado, 驴desea instalar el software necesario?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Ubicaci贸n en el bus"
+msgid "Looking at packages already installed..."
+msgstr "Buscando paquetes ya instalados..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
msgstr ""
-"- Dispositivos PCI y USB : esto lista el fabricante, dispositivo, ids del "
-"subfabricante y del subdispositivo PCI/USB"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Identificaci贸n del bus"
+msgid "Driver"
+msgstr "Controlador"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"El n煤cleo GNU/Linux necesita correr un lazo de c谩lculo al arrancar para "
-"inicializar un contador. El resultado se almacena como bogomips como una "
-"manera de hacer un \"benchmark\" de la CPU."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Linuxconf a veces realizar谩 varias tareas al arrancar para\n"
+"mantener la configuraci贸n del sistema."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "canal EIDE/SCSI"
+msgid "Printer on remote lpd server"
+msgstr "Impresora en un servidor lpd remoto"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Channel"
-msgstr "Canal"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Antes de instalar cualquier tipograf铆a, aseg煤rese que tiene derecho de "
+"usarlas\n"
+"e instalarlas en su sistema.\n"
+"\n"
+"-Puede instalar las tipograf铆as usando la manera normal. En casos raros,\n"
+"puede ser que tipograf铆as \"falsas\" congelen a su servidor X."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-"esto es el bus f铆sico sobre el cual se conecta el dispositivo (ej.: PCI, "
-"USB, ...)"
+"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
+"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
+"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
+"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
+"esta pantalla. Tenga cuidado de elegir los par谩metros correctos.\n"
+"\n"
+"Las opciones principales de Yaboot son:\n"
+"\n"
+" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
+"prompt de arranque.\n"
+"\n"
+" * Dispositivo de arranque: indica donde desea colocar la informaci贸n\n"
+"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
+"partici贸n bootstrap con anterioridad para contener esta informaci贸n.\n"
+"\n"
+" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
+"disponibles con Yaboot. La primera se mide en segundos y aqu铆 puede elegir\n"
+"entre CD, arranque OF, MacOS o Linux.\n"
+"\n"
+" * Demora de arranque del n煤cleo: esta demora es similar a la demora de\n"
+"arranque de LILO. Luego de seleccionar Linux, tendr谩 esta demora en d茅cimas\n"
+"de segundo antes que se seleccione su descripci贸n del n煤cleo\n"
+"predeterminada.\n"
+"\n"
+" * 驴Habilitar arranque desde el CD?: marcando esta opci贸n Usted puede\n"
+"elegir \"C\" para el CD en el primer prompt de arranque.\n"
+"\n"
+" * 驴Habilitar arranque OF?: marcando esta opci贸n Usted puede elegir \"N\"\n"
+"para Open Firmware en el primer prompt de arranque.\n"
+"\n"
+" * SO predeterminado: puede seleccionar qu茅 sistema operativo arrancar谩 por\n"
+"defecto cuando expira la demora de Open Firmware."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "No mouse"
+msgstr "Sin rat贸n"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "la lista de controladores alternativos para esta tarjeta de sonido"
+msgid "Germany"
+msgstr "Alemania"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Controladores alternativos"
+msgid "Austria"
+msgstr "Austria"
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "驴Desea que la tecla BackSpace env铆e un Delete en la consola?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Use \"sndconfig\" luego de la instalaci贸n para configurar su tarjeta de "
+"sonido"
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Por favor, seleccione la distribuci贸n de su teclado."
+msgid "Collapse Tree"
+msgstr "Contraer el 谩rbol"
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "隆隆隆 No se puede iniciar la actualizaci贸n en vivo !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Configurador de Instalaci贸n Autom谩tica"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "Configurar la red"
+
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "驴D贸nde quiere instalar el cargador de arranque?"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Por favor, inserte el CD-ROM de la instalaci贸n en su unidad y presione "
-"Aceptar.\n"
-"Si no lo tiene, presione Cancelar para evitar la actualizaci贸n en vivo."
+"El primer paso es elegir el idioma de instalaci贸n. En el ejemplo se elige\n"
+"\"%s\" como regi贸n y \"%s\" como idioma.\n"
+"\n"
+"Su elecci贸n de idioma preferido afectar谩 al idioma de la documentaci贸n, el\n"
+"instalador y el sistema en general. Seleccione primero la regi贸n en la que\n"
+"se encuentra, y luego el idioma que habla.\n"
+"\n"
+"Al hacer clic sobre el bot贸n \"%s\" podr谩 seleccionar otros idiomas para\n"
+"instalar en su estaci贸n de trabajo, instalando as铆 los archivos espec铆ficos\n"
+"para esos idiomas para la documentaci贸n y las aplicaciones. Por ejemplo, si\n"
+"albergar谩 a gente de Francia en su m谩quina, seleccione Espa帽ol como idioma\n"
+"principal en la vista de 谩rbol y \"%s\" en la secci贸n avanzada.\n"
+"\n"
+"Note que no est谩 limitado a elegir un 煤nico idioma adicional. Puede elegir\n"
+"varios, o incluso instalarlos a todos eligiendo la casilla \"%s\".\n"
+"Seleccionar el soporte para un idioma significa que se instalar谩n las\n"
+"traducciones, tipograf铆as, correctores ortogr谩ficos, etc. para dicho\n"
+"idioma. Adicionalmente, la casilla \"%s\" permite que fuerce al sistema a\n"
+"utilizar Unicode (UTF-8) Sin embargo, note que esta es una caracter铆stica\n"
+"experimental. Si selecciona diferentes idiomas que necesitan codificaciones\n"
+"diferentes, de cualquier manera se instalar谩 el soporte para Unicode.\n"
+"\n"
+"Para cambiar de un idioma a otro, Usted puede ejecutar el comando\n"
+"\"localedrake\". Si lo hace como \"root\" cambiar谩 el idioma todo el\n"
+"sistema, si lo hace como usuario no privilegiado cambiar谩 s贸lo el idioma\n"
+"predeterminado de ese usuario."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Cambie el CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "El %s no est谩 soportado por esta versi贸n de Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Se ha realizado el cambio, pero no se har谩 efectivo hasta que salga"
+msgid "DHCP client"
+msgstr "cliente DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Guardar como..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Fall贸 la restauraci贸n a partir del archivo %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Por favor, ingrese su direcci贸n de correo electr贸nico debajo "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Rat贸n Logitech (serie, antiguo tipo C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "configuraci贸n de alerta"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "驴Est谩 seguro que desea configurar la impresi贸n en esta m谩quina?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Recibir谩 una alerta si la carga es mayor que este valor"
+msgid "New devfs device"
+msgstr "Dispositivo devfs nuevo"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "configuraci贸n de la carga"
+msgid "ERROR: Cannot spawn %s."
+msgstr "ERROR: No se puede lanzar %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Recibir谩 una alerta si alguno de ls servicios seleccionados ya no est谩 "
-"corriendo"
+msgid "Boot Style Configuration"
+msgstr "Configuraci贸n del estilo de arranque"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Sincronizaci贸n autom谩tica de hora (usando NTP)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "configuraci贸n del servicio"
+msgid "Backup files not found at %s."
+msgstr "Copiar archivos no encontrados en %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Servicio Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Gracias por elegir Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Servicio Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Armenio (fon茅tico)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Servidor SSH"
+msgid "Card model:"
+msgstr "Modelo de la tarjeta :"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Samba Server"
-msgstr "Servidor Samba"
+msgid "Thin Client"
+msgstr "Cliente liviano"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Servidor de correo Postfix"
+msgid "Start Server"
+msgstr "Iniciar el Servidor"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Servidor FTP"
+msgid "Turkmenistan"
+msgstr "Turkmenist谩n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Nombres de dominio"
+msgid "All remote machines"
+msgstr "Todas las m谩quinas remotas"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Servidor de World Wide Web Apache"
+msgid "Install themes"
+msgstr "Instalar temas"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Bienvenido a la herramienta de configuraci贸n del correo.\n"
-"\n"
-"Aqu铆 podr谩 configurar su sistema de alerta.\n"
+" actualizaciones 2002 MandrakeSoft por Stew Benedict <sbenedict"
+"\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Configuraci贸n de alerta por correo"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Alerta por correo"
+msgid "Preparing installation"
+msgstr "Preparando la instalaci贸n"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "por favor, espere, analizando el archivo: %s"
+msgid "Edit selected host/network"
+msgstr "Editar host/red seleccionada"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Contenido del archivo"
+msgid "Add User -->"
+msgstr "A帽adir usuario -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Calendario"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Elija un archivo"
+msgid "True Type fonts installation"
+msgstr "Instalaci贸n de tipograf铆as True Type"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "pero no hay coincidencias"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
+"Detectar autom谩ticamente las impresoras conectadas directamente a la red "
+"local"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "coincidencia"
+msgid "LAN configuration"
+msgstr "Configuraci贸n de la red local"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Configuraci贸n"
+msgid "hard disk model"
+msgstr "modelo de disco r铆gido"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Una herramienta para ver sus archivos de registro (logs)"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "No puede usar un Volumen L贸gico LVM para el punto de montaje %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "buscar"
+msgid "Get Windows Fonts"
+msgstr "Obtener tipograf铆as de Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Explicaciones de las herramientas de Mandrake"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Iran铆"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Mensajes"
+msgid "Croatia"
+msgstr "Croacia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Usuario"
+msgid "Gateway:"
+msgstr "Pasarela:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Ayuda/_Acerca..."
+msgid "Add server"
+msgstr "A帽adir servidor"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opciones/Prueba"
+msgid "Remote printer name"
+msgstr "Nombre de la impresora remota"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Archivo/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft ha dise帽ado herramientas exclusivas para crear la versi贸n de "
+"Linux m谩s segura jam谩s: DrakSec, una herramienta de administraci贸n de la "
+"seguridad del sistema, y un cortafuegos potente se juntan para reducir "
+"dr谩sticamente los riesgos de hacking."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Archivo/Guardar _Como"
+msgid "Device: "
+msgstr "Dispositivo: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>G"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Archivo/_Guardar"
+msgid "License agreement"
+msgstr "Acuerdo de licencia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>A"
+msgid "System Options"
+msgstr "Opciones de sistema"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Archivo/_Abrir"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
+"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Por favor, elija el nivel de seguridad deseado"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Archivo/_Nuevo"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Este host ya est谩 en la lista, no se puede volver a a帽adir.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Mostrar s贸lo para el d铆a seleccionado"
+msgid ", USB printer"
+msgstr ", impresora USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "驴Emular el tercer bot贸n?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Elija las aplicaciones que soportar谩n las tipograf铆as:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Seleccione el tipo de su rat贸n, por favor."
+msgid "Configure X"
+msgstr "Configuraci贸n de X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Conectar %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turco (modelo \"F\" tradicional)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Desconectar %s"
+msgid "Congratulations!"
+msgstr "隆Felicidades!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Atenci贸n, se ha detectado otra conexi贸n con la Internet, tal vez usando su "
-"red"
+msgid "Use owner id for execution"
+msgstr "Usar ID del due帽o para la ejecuci贸n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "recibido"
+msgid "Down"
+msgstr "Bajar"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "transmitido"
+msgid "Raw printer (No driver)"
+msgstr "Impresora \"en crudo\" (sin controlador)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "recibido: "
+msgid "Install rpm"
+msgstr "Instalar rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "enviado: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Para imprimir un archivo desde la l铆nea de comando (ventana de terminal) "
+"utilice el comando \"%s <archivo>\" o una herramienta de impresi贸n gr谩fica: "
+"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas gr谩ficas le "
+"permiten seleccionar la impresora y modificar las opciones de configuraci贸n "
+"f谩cilmente.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Medida local"
+msgid "Time remaining "
+msgstr "Tiempo restante "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "promedio"
+msgid "UK keyboard"
+msgstr "Brit谩nico"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Configuraci贸n del color"
+msgid "Unmount"
+msgstr "Desmontar"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Fall贸 la conexi贸n.\n"
-"Verifique su configuraci贸n en el Centro de Control de Mandrake."
+msgid "Uninstall Fonts"
+msgstr "Desinstalar tipograf铆as"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Conexi贸n completa."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Desconexi贸n desde la Internet completa."
+msgid "German (no dead keys)"
+msgstr "Alem谩n (sin teclas muertas)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Fall贸 la desconexi贸n desde la Internet."
+msgid "Transferring %s..."
+msgstr "Transfiriendo %s ..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Conectando a la Internet "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil colores (15 bits)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Desconectando desde la Internet "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Puede exportar usando NFS o Samba. 驴Cu谩l elige"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Por favor espere, probando su conexi贸n..."
+msgid "Reboot"
+msgstr "Reiniciar"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Registros"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Tiempo de conexi贸n: "
+msgid "Mandrake Control Center"
+msgstr "Centro de control de Mandrake"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Velocidad de recepci贸n:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Puede ingresar otros puertos. \n"
+"Por ejemplo: 139/tcp 139/udp.\n"
+"Consulte /etc/services para m谩s informaci贸n."
-#: ../../standalone/net_monitor:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Velocidad de env铆o:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" Normalmente el instalador puede detectar y configurar autom谩ticamente el\n"
+"monitor conectado a su m谩quina. Si este no es el caso, en esta lista puede\n"
+"elegir el monitor que realmente posee."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Estad铆sticas"
+msgid "\t-Tape \n"
+msgstr "\t-Tape \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Perfil "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"No se instal贸 navegador en su sistema, por favor instale uno si desea "
+"navegar el sistema de ayuda"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Monitoreo de la red"
+msgid "Remember this password"
+msgstr "Recordar esta contrase帽a"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Leyendo datos de impresoras instaladas..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Ahora, la conexi贸n compartida a Internet est谩 activa."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Nombre/direcci贸n IP del host:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Red por SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Este host ya est谩 en la lista, no se puede volver a a帽adir.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Si se detect贸 autom谩ticamente la impresora deseada, simplemente el铆jala de "
+"la lista y luego agregue el nombre de usuario, contrase帽a, y/o grupo de "
+"trabajo si es necesario."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Usar el espacio libre de la partici贸n Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Debe ingresar el nombre o la IP del host.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "se encontr贸 %s en %s, 驴configurarlo autom谩ticamente?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"Elija el host donde se deber铆an hacer disponibles los esc谩neres locales:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Compartir esc谩neres locales"
+"Argumentos: (arg)\n"
+"\n"
+"Usar contrase帽a para autenticar usuarios."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Esta m谩quina"
+msgid "XFree86 driver: %s\n"
+msgstr "Controlador XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Quitar host seleccionado"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Este host/red ya est谩 en la lista, no se puede volver a a帽adir.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Editar host seleccionado"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Reporte de DrakBackup \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "A帽adir host"
+msgid "Choose the packages you want to install"
+msgstr "Elija los paquetes que desea instalar"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-"Estas son las m谩quinas desde las cuales deber铆an utilizarse los esc谩neres:"
+msgid "Papua New Guinea"
+msgstr "Pap煤a Nueva Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Uso de esc谩neres remotos"
+msgid "Serbian (cyrillic)"
+msgstr "Serbio (cir铆lico)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Todas las m谩quinas remotas"
+msgid "Make kernel message quiet by default"
+msgstr "Predeterminadamente el mensaje del n煤cleo es \"silencioso\""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Estas son las m谩quinas en las cuales deber铆an estar disponibles los "
-"esc谩neres conectados localmente:"
+"驴Quiere configurar esta impresora (\"%s\")\n"
+"como la impresora predeterminada?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Usar los esc谩neres en los hosts:"
+msgid "The DHCP end range"
+msgstr "Fin del rango de DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Usar los esc谩neres en computadoras remotas"
+msgid "Creating bootdisk..."
+msgstr "Creando el disquete de arranque"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Compartir esc谩neres en hosts: "
+msgid "Wait please, testing your connection..."
+msgstr "Por favor espere, probando su conexi贸n..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Los esc谩neres en esta m谩quina est谩n disponibles para otras computadoras"
+msgid "Bringing down the network"
+msgstr "Bajando la red"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Tambi茅n puede decidir aqu铆 si los esc谩neres en las m谩quinas remotas deber铆an "
-"estar disponibles autom谩ticamente en esta m谩quina."
+msgid "Login ID"
+msgstr "ID de conexi贸n"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Aqu铆 puede elegir si los esc谩neres conectados a esta m谩quina deber铆an poder "
-"accederse desde m谩quinas remotas y desde qu茅 m谩quinas remotas."
+"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
+"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Regenerando lista de esc谩neres configurados ..."
+msgid "DHCP Client"
+msgstr "Cliente DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Buscando esc谩neres nuevos..."
+msgid "dismiss"
+msgstr "rechazar"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Buscando esc谩neres configurados ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Imprimiendo/Escaneando en \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Compartir esc谩ner"
+msgid "omit raid modules"
+msgstr "omitir m贸dulos raid"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "A帽adir un esc谩ner manualmente"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd es el demonio de impresi贸n, necesario para que lpr funcione\n"
+"correctamente. B谩sicamente, es un servidor que coloca las tareas de\n"
+"impresi贸n en las colas de impresi贸n adecuadas para cada impresora."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Buscar esc谩neres nuevos"
+msgid "Internet Connection Configuration"
+msgstr "Configuraci贸n de la conexi贸n a Internet"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "No se encontraron esc谩neres disponibles en su sistema.\n"
+msgid "comma separated numbers"
+msgstr "n煤meros separados por comas"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"El siguiente esc谩ner\n"
-"\n"
-"%s\n"
-"est谩 disponible en su sistema.\n"
+"Una vez que seleccion贸 un dispositivo, podr谩 ver informaci贸n sobre el mismo "
+"en los campos mostrados en el marco derecho (\"Informaci贸n\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Subir un nivel la regla seleccionada"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Los siguiente esc谩neres\n"
+"El siguiente esc谩ner\n"
"\n"
"%s\n"
-"est谩n disponibles en su sistema.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Su %s ha sido configurado.\n"
-"Ahora puede escanear documentos usando \"XSane\" desde Multimedios/Gr谩ficos "
-"en el men煤 de aplicaciones."
+"est谩 disponible en su sistema.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "elija el dispositivo"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "驴Seguro que quiere borrar la impresora \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Por favor, seleccione el dispositivo donde est谩 conectado su %s"
+msgid "I can't find any room for installing"
+msgstr "No se puede encontrar nada de espacio para instalar"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Buscando esc谩neres..."
+msgid "Default printer"
+msgstr "Impresora predeterminada"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "/Autodetectar puertos disponibles"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Ha configurado m煤ltiples formas de conectarse a Internet.\n"
+"Seleccione la que quiere utilizar.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Nota: no se pueden detectar autom谩ticamente los puertos paralelo)"
+msgid "Modify RAID"
+msgstr "Modificar el RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Printerdrake debe configurar el %s.\n"
-"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
-"secci贸n Hardware."
+"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
+"seleccione una tarjeta PCI en la pantalla siguiente."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "El %s no est谩 soportado"
+msgid "Add user"
+msgstr "A帽adir un usuario"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Esta versi贸n de Scannerdrake deconoce al %s."
+msgid "RAID-disks %s\n"
+msgstr "Discos-RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "El %s no est谩 soportado por esta versi贸n de Mandrake Linux."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Puerto: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Por favor, ingrese el nombre de la Interfaz conectada a la Internet.\n"
+"\n"
+"Ejemplos:\n"
+"\t\tppp+ para conexiones por m贸dem o DSL,\n"
+"\t\teth0, o eth1 para conexi贸n por cable,\n"
+"\t\tippp+ para una conexi贸n RDSI.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Elija su teclado"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Modelo detectado: %s"
+msgid "Format partitions"
+msgstr "Formateo de particiones"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Correcci贸n autom谩tica de la configuraci贸n de CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Seleccione un modelo de esc谩ner"
+msgid "Running \"%s\" ..."
+msgstr "Ejecutando \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s no est谩 en la base de datos de esc谩neres, 驴configurarlo manualmente?"
+msgid "enable radio support"
+msgstr "habilitar el soporte para radio"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "se encontr贸 %s en %s, 驴configurarlo autom谩ticamente?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Detecci贸n de hardware en progreso"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Se agregaron algunos dispositivos:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Compartir esc谩neres en hosts: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Se quitaron algunos dispositivos en la clase de hardware \"%s\":\n"
+msgid "Loopback file name: %s"
+msgstr "Nombre del archivo de loopback: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+msgid "Please choose the printer to which the print jobs should go."
msgstr ""
-"El 茅xito de MandrakeSoft se basa en el principio del Software Libre. Su "
-"sistema operativo nuevo es el resultado del trabajo colaborativo de parte de "
-"la Comunidad Linux mundial"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Bienvenido al mundo del C贸digo Abierto"
+"Por favor, elija la impresora a la cual deber铆an ir los trabajos de "
+"impresi贸n."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Gracias por elegir Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "No transferir impresoras"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Para compartir su conocimiento y ayudar a construir herramientas Linux, "
-"煤nase a los foros de discusi贸n que encontrar谩 en nuestras p谩ginas web para "
-"la \"Comunidad\""
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Demora antes de arrancar la imagen predeterminada"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"驴Desea saber m谩s acerca de la comunidad de C贸digo Abierto? Participe en el "
-"mundo del Software Libre!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "隆Construya el futuro de Linux!"
+"\n"
+" Copyright (C) 2001-2002 por MandrakeSoft \n"
+"\tDUPONT Sebastien (versi贸n original)\n"
+" CHAUMETTE Damien dchaumette\\@mandrakesoft.com\n"
+"\n"
+" Este programa es software libre; lo puede redistribuir y/o modificar\n"
+" bajo los t茅rminos de la Licencia P煤blica General GNU publicada por la\n"
+" Free Software Foundation; ya sea la versi贸n 2, o (a su elecci贸n)\n"
+" cualquier versi贸n posterior.\n"
+"\n"
+" Este programa se distribuye con la esperanza que resultar谩 煤til, pero\n"
+" SIN GARANT脥A ALGUNA; incluso sin la garant铆a impl铆cita de COMERCIABILIDAD\n"
+" o ADECUABILIDAD PARA UN PROP脫SITO PARTICULAR. Vea la Licencia P煤blica\n"
+" General GNU para m谩s detalles.\n"
+"\n"
+" Deber铆a haber recibido una copia de la Licencia P煤blica General GNU junto\n"
+" con este programa; de no ser as铆, escriba a la Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Gracias:\n"
+" - pfm2afm: \n"
+"\t por Ken Borgendale:\n"
+"\t Convertir un archivo .pfm de Windows a uno .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t por James Macnicol: \n"
+"\t type1inst genera archivos fonts.dir fonts.scale y Fontmap.\n"
+" - ttf2pt1: \n"
+"\t por Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convertir archivos de tipograf铆as ttf a tipograf铆as afm y pfb\n"
+"\n"
+"\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 le permite utilizar el 煤ltimo software para reproducir "
-"archivos de audio, editar y organizar sus im谩genes o fotos, y reproduzcir "
-"v铆deos"
+msgid "Please check for multisession CD"
+msgstr "Por favor, marque para CD multi-sesi贸n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Navegue la web con Mozilla o Konqueror, lea su correo electr贸nico con "
-"Evolution o KMail, cree sus documentos con OpenOffice.org."
+msgid "user"
+msgstr "usuario"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft ha seleccionado el mejor software para Usted"
+msgid "Use Hard Disk to backup"
+msgstr "Usar el disco r铆gido para copia de respaldo"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 le brinda el Centro de Control de Mandrake, una "
-"herramienta potente para adaptar por completo su computadora al uso que hace "
-"de la misma. Configure y personalice elementos tales como el nivel de "
-"seguridad, los perif茅ricos (pantalla, rat贸n, teclado...), la conexi贸n con la "
-"Internet, 隆y mucho m谩s!"
+msgid "Configure"
+msgstr "Configurar"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Herramienta de configuraci贸n multiprop贸sito de Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Adapte perfectamente su computadora a sus necesidades gracias a las 11 "
-"interfaces de usuario de Mandrake Linux las cuales se pueden modificar por "
-"completo: KDE3.1, Gnome 2.2, WindowMaker..."
+"Atenci贸n, se ha detectado otra conexi贸n con la Internet, tal vez est谩 usando "
+"su red"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Un entorno personalizable"
+msgid "Backup Users"
+msgstr "Respaldar usuarios"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Modificar y crear en diferentes lenguajes tales como Perl, Python, C, C++ "
-"nunca ha sido tan f谩cil como ahora gracias a GNU gcc 3 y los mejores "
-"entornos de desarrollo Open Source."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 es la mejor plataforma de desarrollo."
+"Por favor, defina el nombre de su m谩quina.\n"
+"El nombre de su m谩quina deber铆a ser un nombre de m谩quina clasificado "
+"completamente,\n"
+"como \"mimaquina.milabo.micompa.com\".Tambi茅n puede introducir la direcci贸n "
+"IP de la pasarela si tiene una"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Transforme su m谩quina en un servidor Linux potente con unos pocos clic del "
-"rat贸n: servidor web, de correo, cortafuegos, router, servidor de archivos e "
-"impresoras, ..."
+msgid "Select Printer Spooler"
+msgstr "Seleccione sistema de impresi贸n (spooler)"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Convierta su m谩quina en un servidor confiable."
+msgid "Create new theme"
+msgstr "Crear un tema nuevo"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Nuestro rango completo de soluciones Linux, as铆 como tambi茅n ofertas "
-"especiales sobre productos y otras \"cositas\", est谩n disponibles en l铆nea "
-"en nuestra tienda electr贸nica:"
+msgid "Mandrake Tools Explanation"
+msgstr "Explicaciones de las herramientas de Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "La tienda oficial de MandrakeSoft"
+msgid "No image found"
+msgstr "No se encontr贸 imagen"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Mejore el rendimiento de su computadora con la ayuda de una selecci贸n de "
-"socios que ofrecen soluciones profesionales compatibles con Mandrake Linux"
+"Algunos paquetes importantes no fueron instalados correctamente.\n"
+"Seguramente su lector de CD o su CD de instalaci贸n sean defectuosos.\n"
+"Compruebe el CD de instalaci贸n en un sistema ya existente con el comando:\n"
+" rpm -qpl Mandrake/RPMS/*.rpm\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "Obtenga lo mejor con los socios estrat茅gicos de Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Modelo detectado: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft ha dise帽ado herramientas exclusivas para crear la versi贸n de "
-"Linux m谩s segura jam谩s: DrakSec, una herramienta de administraci贸n de la "
-"seguridad del sistema, y un cortafuegos potente se juntan para reducir "
-"dr谩sticamente los riesgos de hacking."
+"El administrador de conexi贸n X11 le permite conectarse gr谩ficamente\n"
+"a su sistema con el X Window System corriendo y soporta correr varias\n"
+"sesiones X diferentes en su m谩quina local a la vez."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimice su seguridad"
+msgid "if set to yes, run the daily security checks."
+msgstr "si se pone en s铆, ejecutar las verificaciones de seguridad diarias."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Este producto est谩 disponible en el sitio web MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Azerbay谩n"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Complete su configuraci贸n de seguridad con este software f谩cil de usar que "
-"combina componentes de alto rendimiento tales como un cortafuegos, un "
-"servidor y cliente de red privada virtual (VPN), un sistema de detecci贸n de "
-"intrusos y un administrador del tr谩fico."
+msgid "No tape in %s!"
+msgstr "隆No hay cinta en %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Haga seguras sus redes con el Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"脷nase a los equipos de soporte de Mandrakesoft y de la Comunidad Linux en "
-"l铆nea para compartir su conocimiento y ayudar a otros convirti茅ndose en un "
-"Experto reconocido en el sitio web de soporte t茅cnico en l铆nea:"
+"esto es el bus f铆sico sobre el cual se conecta el dispositivo (ej.: PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Encuentre las soluciones a sus problemas por medio de la plataforma de "
-"soporte en l铆nea de MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "驴C贸mo est谩 conectada la impresora?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Convi茅rtase en un MandrakeExpert"
+msgid "Security level"
+msgstr "Nivel de seguridad"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Todos los incidentes estar谩n seguidos por un 煤nico experto t茅cnico "
-"calificado de MandrakeSoft."
+msgid "final resolution"
+msgstr "resoluci贸n final"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
-"Una plataforma en l铆nea para responder a las necesidades espec铆ficas de "
-"soporte de la compa帽铆a."
+msgid "Services"
+msgstr "Servicios"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporativo"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19807,10 +19819,6 @@ msgstr ""
"de c谩lculo (kspread, gnumeric), visualizadores PDF, etc"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estaci贸n de trabajo"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Estaci贸n de Juegos"
@@ -19883,10 +19891,6 @@ msgstr ""
"herramientas que lo acompa帽an"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorno gr谩fico"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Estaci贸n de trabajo GNOME"
@@ -19907,10 +19911,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desarrollo"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Bibliotecas de desarrollo C y C++, programas y archivos *.h"
@@ -19979,903 +19979,73 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "Servidor NFS, servidor SMB, servidor proxy, servidor SSH"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Estaci贸n de audio"
-
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Programas de reproducci贸n/edici贸n de sonido"
-
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Estaci贸n de v铆deo"
-
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Programas de reproducci贸n de v铆deo"
-
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Estaci贸n gr谩fica"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Programas para gr谩ficos"
-
-#: ../../share/compssUsers:999
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Conjunto de herramientas para leer y enviar correo y noticias y para navegar "
"por la Web"
-#~ msgid "Printer sharing"
-#~ msgstr "Compartir impresora"
-
-#~ msgid ""
-#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
-#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
-#~ "raster format for the data sent to the printer. The driver for these "
-#~ "printers is still in a very early development stage and so it will "
-#~ "perhaps not always work properly. Especially it is possible that the "
-#~ "printer only works when you choose the A4 paper size.\n"
-#~ "\n"
-#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
-#~ "was originally created, need their firmware to be uploaded to them after "
-#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
-#~ "search the printer's Windows driver CD or your Windows partition for the "
-#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
-#~ "following commands:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "The first command can be given by any normal user, the second must be "
-#~ "given as root. After having done so you can print normally.\n"
-#~ msgstr ""
-#~ "Su impresora pertenece al grupo de impresoras l谩ser GDI (winprinters) "
-#~ "vendidas por fabricantes diferentes que utilizan el formato raster "
-#~ "Zenographics ZJ-stream para los datos enviados a la impresora. El "
-#~ "controlador para estas impresoras todav铆a est谩 en una etapa muy temprana "
-#~ "de desarrollo y, en consecuencia puede no funcionar correctamente en "
-#~ "todos los casos. En especial, es posible que la impresora s贸lo funcione "
-#~ "cuando Usted elige el tama帽o de papel A4.\n"
-#~ "\n"
-#~ "Algunas de estas impresoras, como la HP LaserJet 1000, para la cual fue "
-#~ "creado este controlador, necesitan que se les cargue el firmware luego "
-#~ "que se encienden. En el caso de la HP LaserJet 1000 Usted tiene que "
-#~ "buscar en el CD de controladores Windows o en su partici贸n Windows, el "
-#~ "archivo \"sihp1000.img\" y subir el archivo a la impresora con alguno de "
-#~ "los comandos siguientes:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "El primer comando se puede realizar como usuario no privilegiado, el "
-#~ "segundo se debe realizar como root. Luego de hacer esto puede imprimir "
-#~ "normalmente.\n"
-
-#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgstr "Impresora l谩ser GDI usando el formato Zenographics ZJ-Stream"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid "Office"
-#~ msgstr "Oficina"
-
-#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
-#~ msgstr ""
-#~ "Conjunto de herramientas para correo, noticias, web, transferencia de "
-#~ "archivos, y chat"
-
-#~ msgid "Games"
-#~ msgstr "Juegos"
-
-#~ msgid "Multimedia - Graphics"
-#~ msgstr "Multimedios - Gr谩ficos"
-
-#~ msgid "Multimedia - Sound"
-#~ msgstr "Multimedios - Sonido"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Configuraci贸n y conexi贸n a Internet"
-#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-#~ msgstr "Herramientas de audio: reproductores mp3 o midi, mezcladores, etc"
+#~ msgid "Configure the connection"
+#~ msgstr "Configurar la conexi贸n"
-#~ msgid "Multimedia - Video"
-#~ msgstr "Multimedios - V铆deo"
+#~ msgid "Disconnect"
+#~ msgstr "Desconectar"
-#~ msgid "Video players and editors"
-#~ msgstr "Reproductores y editores de v铆deo"
-
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multimedios - Grabaci贸n de CD"
-
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "Herramientas para crear y grabar CDs"
-
-#~ msgid "More Graphical Desktops (Gnome, IceWM)"
-#~ msgstr "M谩s escritorios gr谩ficos (Gnome, IceWM)"
-
-#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-#~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#~ msgid "Personal Information Management"
-#~ msgstr "Administraci贸n de la informaci贸n personal"
-
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "Herramientas para su Palm Pilot o su Visor"
-
-#~ msgid "Personal Finance"
-#~ msgstr "Finanzas personales"
-
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "Programas para administrar sus finanzas, tales como gnucash"
-
-#~ msgid "no network card found"
-#~ msgstr "no se encontr贸 ninguna tarjeta de red"
+#~ msgid "Connect"
+#~ msgstr "Conectar"
#~ msgid ""
-#~ "Mandrake Linux 9.1 has selected the best software for you. Surf the Web "
-#~ "and view animations with Mozilla and Konqueror, or read your mail and "
-#~ "handle your personal information with Evolution and Kmail"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 ha seleccionado el mejor software para Usted. Navegue "
-#~ "la web y vea animaciones con Mozilla y Konqueror, o lea su correo y "
-#~ "organice su informaci贸n personal con Evolution y KMail"
-
-#~ msgid "Get the most from the Internet"
-#~ msgstr "Aprovechar al m谩ximo la Internet"
-
-#~ msgid "Push multimedia to its limits!"
-#~ msgstr "隆Lleve los multimedios al l铆mite!"
-
-#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
-#~ msgstr "隆Descubra las herramientas gr谩ficas y multimedios m谩s actualizadas!"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
-#~ "strategy, ..."
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 brinda lo mejor en juegos de C贸digo Abierto - arcade, "
-#~ "acci贸n, estrategia, ..."
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides a powerful tool to fully customize and "
-#~ "configure your machine"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 brinda una herramienta potente para personalizar y "
-#~ "configurar su m谩quina por completo."
-
-#~ msgid "User interfaces"
-#~ msgstr "Interfaces de usuario"
-
-#~ msgid ""
-#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
-#~ "Source development environments"
-#~ msgstr ""
-#~ "Utilice el poder del compilador GNU gcc 3 as铆 como tambi茅n los mejores "
-#~ "entornos de desarrollo de C贸digo Abierto."
-
-#~ msgid "Development simplified"
-#~ msgstr "Desarrollo simplificado"
-
-#~ msgid ""
-#~ "This firewall product includes network features that allow you to fulfill "
-#~ "all your security needs"
-#~ msgstr ""
-#~ "Este producto cortafuegos incluye caracter铆sticas de red que le permiten "
-#~ "satisfacer todas sus necesidades de seguridad"
-
-#~ msgid ""
-#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
-#~ "N.F.)"
-#~ msgstr ""
-#~ "MandrakeSecurity ofrece un rango que incluye el producto Multi Network "
-#~ "Firewall (M.N.F.)."
-
-#~ msgid "Strategic partners"
-#~ msgstr "Socios estrat茅gicos"
-
-#~ msgid ""
-#~ "Whether you choose to teach yourself online or via our network of "
-#~ "training partners, the Linux-Campus catalogue prepares you for the "
-#~ "acknowledged LPI certification program (worldwide professional technical "
-#~ "certification)"
-#~ msgstr ""
-#~ "Ya sea si elige ense帽arse a s铆 mismo en l铆nea o a trav茅s de nuestra red "
-#~ "de socios de entrenamiento, el cat谩logo Linux-Campus lo prepara para el "
-#~ "reconocido programa de certificaci贸n LPT (certificaci贸n t茅cnica "
-#~ "profesional a nivel mundial)."
-
-#~ msgid "Certify yourself on Linux"
-#~ msgstr "Certif铆quese en Linux."
-
-#~ msgid ""
-#~ "The training program has been created to respond to the needs of both end "
-#~ "users and experts (Network and System administrators)"
-#~ msgstr ""
-#~ "El programa de entrenamiento ha sido creado para responder a las "
-#~ "necesidades tanto de los usuarios finales como de los expertos "
-#~ "(Administraci贸n de sistemas y redes)"
-
-#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
-#~ msgstr "Descubra el cat谩logo Linux-Campus de entrenamiento de MandrakeSoft"
-
-#~ msgid ""
-#~ "MandrakeClub and Mandrake Corporate Club were created for business and "
-#~ "private users of Mandrake Linux who would like to directly support their "
-#~ "favorite Linux distribution while also receiving special privileges. If "
-#~ "you enjoy our products, if your company benefits from our products to "
-#~ "gain a competititve edge, if you want to support Mandrake Linux "
-#~ "development, join MandrakeClub!"
-#~ msgstr ""
-#~ "El Club de Mandrake y el Club Corporativo de Mandrake fueron creados para "
-#~ "las empresas y usuarios privados de Mandrake Linux que desean soportar "
-#~ "directamente a su distribuci贸n Linux favorita a la vez que reciben "
-#~ "privilegios especiales. Si Usted disfruta nuestros productos, si su "
-#~ "empresa se beneficia con nuestros productos para ganar competitividad, si "
-#~ "desea soportar el desarrollo de Mandrake Linux, 隆煤nase al Club de "
-#~ "Mandrake!"
-
-#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
-#~ msgstr "Descubra el Club de Mandrake y el Club Corporativo de Mandrake"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of various information it has\n"
-#~ "about your system. Depending on your installed hardware, you may have "
-#~ "some\n"
-#~ "or all of the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": check the current mouse configuration and click on the "
-#~ "button\n"
-#~ "to change it if necessary.\n"
-#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
-#~ "the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
-#~ "country, click on the button and choose another one.\n"
-#~ "\n"
-#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-#~ "primary language you have chosen. But here, just as in your choice of a\n"
-#~ "keyboard, you may not be in a country to which the chosen language\n"
-#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
-#~ "configure the clock for the correct timezone.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
-#~ "printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
-#~ "\n"
-#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-#~ "click that button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-#~ "interface in \"800x600\" resolution. If that does not suits you, click "
-#~ "on\n"
-#~ "the button to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"Network\": If you want to configure your Internet or local network\n"
-#~ "access now, you can by clicking on this button.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. If you notice the sound card displayed is not the one "
-#~ "that\n"
-#~ "is actually present on your system, you can click on the button and "
-#~ "choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. If you have a TV card and it is not detected, click on the button "
-#~ "to\n"
-#~ "try to configure it manually.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated with the card."
-#~ msgstr ""
-#~ "A manera de revisi贸n, DrakX presentar谩 un resumen de las distintas "
-#~ "informaciones\n"
-#~ "que tiene acerca de su sistema. Dependiendo del hardware instalado, puede "
-#~ "tener\n"
-#~ "algunas o todas las entradas siguientes:\n"
-#~ "\n"
-#~ " * \"Rat贸n\": verifique la configuraci贸n del rat贸n y haga clic sobre el\n"
-#~ "bot贸n para cambiarla, si es necesario.\n"
-#~ "\n"
-#~ " * \"Teclado\": verifique la configuraci贸n de la disposici贸n del teclado "
-#~ "y\n"
-#~ "haga clic sobre el bot贸n para cambiarla, si es necesario.\n"
-#~ "\n"
-#~ " * \"Pa铆s\": verifique la selecci贸n corriente del pa铆s. Si Usted no se "
-#~ "encuentra\n"
-#~ "en este pa铆s, haga clic sobre el bot贸n y elija otro.\n"
-#~ "\n"
-#~ " * \"Huso horario\": De manera predeterminada, DrakX, deduce su huso "
-#~ "horario\n"
-#~ "bas谩ndose en el pa铆s que ha elegido. Pero nuevamente, al igual\n"
-#~ "que con la elecci贸n del teclado, puede ocurrir que no se encuentre en el\n"
-#~ "pa铆s que sugiere el idioma elegido. De ser as铆, puede necesitar hacer "
-#~ "clic\n"
-#~ "sobre el bot贸n \"Huso horario\" para configurar el reloj de acuerdo al "
-#~ "huso\n"
-#~ "horario en el que se encuentre.\n"
-#~ "\n"
-#~ " * \"Impresora\": al hacer clic sobre el bot贸n \"Sin impresora\" se "
-#~ "abrir谩\n"
-#~ "el asistente de configuraci贸n de la impresora. Consulte el cap铆tulo\n"
-#~ "correspondiente de la \"Gu铆a de Comienzo\" para m谩s informaci贸n sobre "
-#~ "como\n"
-#~ "configurar una impresora nueva. La interfaz presentada all铆 es similar a "
-#~ "la\n"
-#~ "utilizada durante la instalaci贸n.\n"
-#~ "\n"
-#~ " * \"Cargador de arranque\": si desea cambiar la configuraci贸n de su\n"
-#~ "cargador de arranque, haga clic sobre el bot贸n. Esto deber铆a estar "
-#~ "reservado\n"
-#~ " para usuarios avanzados. \n"
-#~ "* \"Interfaz gr谩fica\": predeterminadamente, DrakX configura su interfaz\n"
-#~ "gr谩fica en \"800x600\" de resoluci贸n. Si eso no lo satisface, haga clic\n"
-#~ "sobre el bot贸n para volver a configurar su interfaz gr谩fica.\n"
-#~ "\n"
-#~ "* \"Red\": si desea configurar la Internet o su acceso a la red local "
-#~ "ahora\n"
-#~ "puede hacerlo haciendo un clic sobre este bot贸n.\n"
-#~ "\n"
-#~ " * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su\n"
-#~ "sistema, la misma se muestra aqu铆. Si nota que la tarjeta de sonido\n"
-#~ "mostrada no es la que est谩 realmente presente en su m谩quina\n"
-#~ "puede hacer clic sobre el bot贸n y elegir otro controlador.\n"
-#~ "\n"
-#~ " * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-#~ "misma se muestra aqu铆. Si tiene una tarjeta de TV y no se detecta, haga "
-#~ "clic\n"
-#~ "sobre el bot贸n para intentar configurarla manualmente.\n"
-#~ "\n"
-#~ " * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la "
-#~ "misma\n"
-#~ "se muestra aqu铆. Puede hacer clic sobre el bot贸n para cambiar los\n"
-#~ "par谩metros asociados a la misma."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a grub/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or "
-#~ "another\n"
-#~ "OS.\n"
-#~ "\n"
-#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader.\n"
-#~ "\n"
-#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
-#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
-#~ "disk\n"
-#~ "(\"On Floppy\").\n"
-#~ "\n"
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can reconfigure your connection."
#~ msgstr ""
-#~ "LILO y grub son cargadores de arranque de GNU/Linux. Normalmente esta\n"
-#~ "etapa est谩 completamente automatizada. DrakX analizar谩 el sector de "
-#~ "arranque\n"
-#~ "del disco y actuar谩 de acuerdo a lo que encuentra all铆:\n"
-#~ "\n"
-#~ "* se encuentra un sector de arranque de Windows, lo reemplazar谩 con uno "
-#~ "de\n"
-#~ "grub/LILO. De esta forma, Usted podr谩 cargar bien GNU/Linux o bien otro\n"
-#~ "sistema operativo.\n"
-#~ "\n"
-#~ "* si encuentra un sector de arranque de grub o LILO, lo reemplazar谩 con\n"
-#~ "uno nuevo.\n"
-#~ "\n"
-#~ "Si no puede realizar una determinaci贸n, DrakX le preguntar谩 d贸nde "
-#~ "colocar\n"
-#~ "el cargador de arranque.\n"
-#~ "\n"
-#~ "\"Dispositivo de arranque\": en la mayor铆a de los casos, no deber谩 "
-#~ "cambiar\n"
-#~ "lo predeterminado (\"Primer sector del disco (MBR)\"), pero si lo "
-#~ "prefiere,el\n"
-#~ "administrador de arranque se puede instalar en el segundo disco o "
-#~ "incluso\n"
-#~ "en un disquete (\"En disquete\")\n"
-#~ "\n"
-#~ "Marcar \"Crear un disquete de arranque\" le permite tener un disco de "
-#~ "rescate\n"
-#~ "a mano.\n"
-#~ "\n"
-#~ "El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Puede\n"
-#~ "acceder al mismo arrancando el CD-ROM, presionando la tecla >>F1<< y\n"
-#~ "tecleando >>rescue<< en el prompt. Si su computadora no puede arrancar\n"
-#~ "desde el CD-ROM, hay al menos dos situaciones donde es cr铆tico tener\n"
-#~ "un disquete de arranque:\n"
-#~ "\n"
-#~ " * cuando instala el cargador de arranque, DrakX sobreescribir谩 el MBR\n"
-#~ "de su disco principal (a menos que use otro administrador de arranque) "
-#~ "para\n"
-#~ "permitirle arrancar Windows o GNU/Linux (si es que tiene Windows en su\n"
-#~ "sistema) Si necesita volver a instalar Windows, el proceso de "
-#~ "instalaci贸n\n"
-#~ "de Microsoft sobreescribir谩 el sector de arranque y 隆le quitar谩 la "
-#~ "posibilidad\n"
-#~ "de arrancar GNU/LInux! * si surge un problema y no puede arrancar GNU/"
-#~ "Linux desde el disco,\n"
-#~ "este disquete ser谩 la 煤nica forma para arrancar GNU/Linux. El mismo "
-#~ "contiene\n"
-#~ "una cantidad de herramientas del sistema para restaurar un sistema que "
-#~ "cay贸\n"
-#~ "debido a una falla de energ铆a, un error infortunado de tecleo, una "
-#~ "contrase帽a de\n"
-#~ "root olvidada, o cualquier otra raz贸n.\n"
#~ "\n"
-#~ "Si dice \"S铆\", se le pedir谩 que inserte un disquete en la disquetera. "
-#~ "El\n"
-#~ "disquete debe estar vac铆o o tener datos no cr铆ticos. DrakX formatear谩\n"
-#~ "el disquete y lo sobreescribir谩 por completo."
+#~ "Puede volver a configurar su conexi贸n."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
#~ msgid ""
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
-#~ "Marcando \"Crear disquete de arranque\" le permite tener un disquete de\n"
-#~ "arranque de rescate a mano.\n"
-#~ "\n"
-#~ "El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Usted\n"
-#~ "puede acceder al mismo arrancando desde el CD-ROM, presionando la tecla\n"
-#~ ">>F1<< durante el arranque y tecleando >>rescue<< en el prompt. Si su\n"
-#~ "computadora no pueda arrancar desde el CD-ROM, Usted deber铆a recurrir a\n"
-#~ "este paso al menos en dos situaciones:\n"
-#~ "\n"
-#~ " * cuando instala el cargador de arranque, DrakX sobreescribir谩 el "
-#~ "sector\n"
-#~ "de arranque (MBR) de su disco principal (a menos que est茅 utilizando "
-#~ "otro\n"
-#~ "administrador de arranque) de forma tal que pueda iniciar o bien Windows "
-#~ "o\n"
-#~ "bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
-#~ "volver a instalar Windows, el proceso de instalaci贸n de Microsoft\n"
-#~ "sobreescribir谩 el sector de arranque, y entonces 隆Usted no podr谩 iniciar\n"
-#~ "GNU/Linux!\n"
#~ "\n"
-#~ " * si surge un problema y Usted no puede iniciar GNU/Linux desde el "
-#~ "disco\n"
-#~ "r铆gido, este disquete ser谩 la 煤nica manera de iniciar GNU/Linux. El "
-#~ "mismo\n"
-#~ "contiene una buena cantidad de herramientas del sistema para restaurar "
-#~ "un\n"
-#~ "sistema que colaps贸 debido a una falla de energ铆a, un error de tecleo\n"
-#~ "infortunado, un error en una contrase帽a, o cualquier otro motivo.\n"
-#~ "\n"
-#~ "Si dice \"S铆\", se le pedir谩 que inserte un disquete dentro de la\n"
-#~ "disquetera. El disquete que inserte debe estar vac铆o o contener datos "
-#~ "que\n"
-#~ "no necesite. No tendr谩 que formatearlo ya que DrakX sobreescribir谩 el\n"
-#~ "disquete por completo."
+#~ "Se puede conectar a Internet o volver a configurar su conexi贸n."
-#~ msgid ""
-#~ "The following printers are configured. Double-click on a printer to "
-#~ "change its settings; to make it the default printer; to view information "
-#~ "about it; or to make a printer on a remote CUPS server available for Star "
-#~ "Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Est谩n configuradas las impresoras siguientes. Haga doble clic sobre una "
-#~ "para cambiar sus par谩metros; para hacerla la predeterminada; para ver "
-#~ "informaci贸n acerca de la misma o para hacer que una impresora en un "
-#~ "servidor CUPS remoto est茅 disponible para Star Office/OpenOffice.org/GIMP."
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Ahora no est谩 conectado a Internet."
#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "Por favor introduzca el nombre de su m谩quina (host) si lo conoce.\n"
-#~ "Algunos servidores DHCP necesitan del nombre de la m谩quina para "
-#~ "funcionar.\n"
-#~ "El nombre de su m谩quina deber铆a ser un nombre de m谩quina clasificado "
-#~ "completamente,\n"
-#~ "como \"mimaquina.milabo.micompa.com\"."
-
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "Error de DrakFloppy: %s"
-
-#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "Iniciar Aurora en el momento del arranque"
-
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Monitor tradicional Gtk+"
-
-#~ msgid "Traditional Monitor"
-#~ msgstr "Monitor tradicional"
-
-#~ msgid "NewStyle Monitor"
-#~ msgstr "Monitor de estilo nuevo"
-
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "Monitor categorizante de estilo nuevo"
-
-#~ msgid "Secure Connection"
-#~ msgstr "Conexi贸n segura"
-
-#~ msgid "FTP Connection"
-#~ msgstr "Conexi贸n FTP"
-
-#~ msgid "Mail/Groupware/News"
-#~ msgstr "Servidor, Correo/Groupware/Noticias"
-
-#~ msgid "Postfix mail server, Inn news server"
-#~ msgstr "Servidor de correo Postfix, servidor de noticias Inn"
-
-#~ msgid "/Options"
-#~ msgstr "/Opciones"
-
-#~ msgid "/Autodetect jazz drives"
-#~ msgstr "/Autodetectar unidades jazz"
-
-#~ msgid "/Autodetect modems"
-#~ msgstr "/Autodetectar m贸dems"
-
-#~ msgid "/Autodetect printers"
-#~ msgstr "/Autodetectar impresoras"
-
-#~ msgid ""
-#~ "The partition you've selected to add as root (/) is physically located "
-#~ "beyond\n"
-#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
-#~ "partition"
-#~ msgstr ""
-#~ "La partici贸n que escogi贸 para usar como ra铆z (/) est谩 f铆sicamente "
-#~ "ubicada\n"
-#~ "despu茅s del 1024潞 cilindro del disco r铆gido, y no tiene partici贸n /boot.\n"
-#~ "Si piensa usar el cargador de arranque LILO, tenga en cuenta que tiene\n"
-#~ "que a帽adir una partici贸n /boot"
-
-#~ msgid ""
-#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
-#~ "> 1024).\n"
-#~ "Either you use LILO and it won't work, or you don't use LILO and you "
-#~ "don't need /boot"
-#~ msgstr ""
-#~ "Disculpe, pero no se permite la creaci贸n de una partici贸n /boot tan "
-#~ "lejos\n"
-#~ "en el disco (en un cilindro > 1024). Puede usar lilo LILO (y es probable "
-#~ "que\n"
-#~ "no funcione), o bien no utiliza LILO (y entonces no necesita /boot)"
-
-#~ msgid "Upgrade"
-#~ msgstr "Actualizaci贸n"
-
-#~ msgid "192.168.100.0/255.255.255.0\n"
-#~ msgstr "192.168.100.0/255.255.255.0\n"
-
-#~ msgid "192.168.100.0/24\n"
-#~ msgstr "192.168.100.0/24\n"
-
-#~ msgid "10.1.*\n"
-#~ msgstr "10.1.*\n"
-
-#~ msgid "10.0.0.*\n"
-#~ msgstr "10.0.0.*\n"
-
-#~ msgid "192.168.100.194\n"
-#~ msgstr "192.168.100.194\n"
-
-#~ msgid "Do you want to configure another printer?"
-#~ msgstr "驴Desea configurar otra impresora?"
-
-#~ msgid "Know how to use this printer"
-#~ msgstr "Se sabe c贸mo usar esta impresora"
-
-#~ msgid "Preparing Printerdrake..."
-#~ msgstr "Preparando a Printerdrake ..."
-
-#~ msgid ""
-#~ "if set to yes, check for empty password, or a password while it should be "
-#~ "in /etc/shadow or other users with id 0."
-#~ msgstr ""
-#~ "si se pone en s铆, verificar contrase帽a vac铆a, o si una contrase帽a deber铆a "
-#~ "estar en /etc/shadow u otros usuarios con id 0."
-
-#~ msgid "Reading printer data ..."
-#~ msgstr "Leyendo los datos de la impresora ..."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "You must indicate where you wish to place the information required to "
-#~ "boot\n"
-#~ "GNU/Linux.\n"
#~ "\n"
-#~ "Unless you know exactly what you are doing, choose \"First sector of "
-#~ "drive\n"
-#~ "(MBR)\"."
+#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
-#~ "Debe indicar donde desea colocar la informaci贸n necesaria para arrancar "
-#~ "en\n"
-#~ "GNU/Linux.\n"
#~ "\n"
-#~ "A menos que sepa exactamente lo que est谩 haciendo, elija \"Primer sector\n"
-#~ "del disco (MBR)\"."
+#~ "Puede desconectarse o volver a configurar su conexi贸n."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "DrakX now needs to know if you want to perform a default (\"Recommended"
-#~ "\")\n"
-#~ "installation or if you want to have greater control (\"Expert\") over "
-#~ "your\n"
-#~ "installation. You can also choose to do a new installation or upgrade "
-#~ "your\n"
-#~ "existing Mandrake Linux system:\n"
-#~ "\n"
-#~ " * \"Install\": completely wipes out the old system. However, depending "
-#~ "on\n"
-#~ "what is currently installed on your machine, you may be able to keep "
-#~ "some\n"
-#~ "old partitions (Linux or otherwise) unchanged;\n"
-#~ "\n"
-#~ " * \"Upgrade\": this installation class allows to simply update the\n"
-#~ "packages currently installed on your Mandrake Linux system. It keeps "
-#~ "your\n"
-#~ "hard drives' current partitions as well as user configurations. All "
-#~ "other\n"
-#~ "configuration steps remain available, similar to a normal installation;\n"
-#~ "\n"
-#~ " * \"Upgrade Packages Only\": this new installation class allows you to\n"
-#~ "upgrade an existing Mandrake Linux system while keeping all system\n"
-#~ "configurations unchanged. Adding new packages to the current "
-#~ "installation\n"
-#~ "is also possible.\n"
-#~ "\n"
-#~ "Upgrades should work fine on Mandrake Linux systems using version \"8.1"
-#~ "\"\n"
-#~ "or later.\n"
-#~ "\n"
-#~ "Depending on your GNU/Linux knowledge, select one of the following "
-#~ "choices:\n"
-#~ "\n"
-#~ " * Recommended: choose this if you have never installed a GNU/Linux\n"
-#~ "operating system. The installation will be very easy and you will only "
-#~ "be\n"
-#~ "asked a few questions;\n"
-#~ "\n"
-#~ " * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
-#~ "perform a highly customized installation. Some of the decisions you will\n"
-#~ "have to make may be difficult if you do not have good GNU/Linux "
-#~ "knowledge,\n"
-#~ "so it is not recommended that those without a fair amount of experience\n"
-#~ "select this installation class."
-#~ msgstr ""
-#~ "DrakX ahora necesita saber si desea realizar una instalaci贸n por defecto\n"
-#~ "(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). "
-#~ "Tambi茅n\n"
-#~ "puede elegir realizar una instalaci贸n nueva o una actualizaci贸n de un\n"
-#~ "sistema Mandrake Linux existente:\n"
-#~ "\n"
-#~ " * \"Instalar\": el sistema anterior se borrar谩 por completo, sin "
-#~ "embargo,\n"
-#~ "dependiendo de lo que su m谩quina contiene actualmente, podr谩 mantener\n"
-#~ "algunas particiones antiguas (Linux u otras) sin cambios;\n"
-#~ "\n"
-#~ " * \"Actualizaci贸n\": esta clase de instalaci贸n le permite simplemente\n"
-#~ "actualizar los paquetes que en este momento est谩n instalados en su "
-#~ "sistema\n"
-#~ "Mandrake Linux. La misma mantiene las particiones corrientes de sus "
-#~ "discos\n"
-#~ "as铆 como tambi茅n las configuraciones de usuarios. Todos los otros pasos "
-#~ "de\n"
-#~ "instalaci贸n permanecen disponibles, de manera similar a lo que ocurre "
-#~ "con\n"
-#~ "una instalaci贸n normal;\n"
-#~ "\n"
-#~ " * \"S贸lo actualizar paquetes\": esta clase nueva de instalaci贸n le "
-#~ "permite\n"
-#~ "actualizar un sistema Mandrake Linux existente a la vez que mantiene sin\n"
-#~ "cambios todas las configuraciones del sistema. Tambi茅n es posible a帽adir\n"
-#~ "paquetes nuevos a la instalaci贸n corriente.\n"
-#~ "\n"
-#~ "Las actualizaciones deber铆an funcionar sin problemas para los sistemas\n"
-#~ "Mandrake Linux que contienen la versi贸n \"8.1\" o una posterior.\n"
-#~ "\n"
-#~ "Dependiendo de su conocimiento de GNU/Linux, elija una de las opciones\n"
-#~ "siguientes:\n"
-#~ "\n"
-#~ " * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
-#~ "GNU/Linux. La instalaci贸n ser谩 muy f谩cil y s贸lo se le formular谩n unas "
-#~ "pocas\n"
-#~ "preguntas;\n"
-#~ "\n"
-#~ " * Experto: si tiene un conocimiento bueno de GNU/Linux, puede que desee\n"
-#~ "realizar una instalaci贸n altamente personalizada. Algunas de las "
-#~ "decisiones\n"
-#~ "que tendr谩 que realizar pueden resultar dif铆ciles si no tiene un buen\n"
-#~ "conocimiento de GNU/Linux, por lo tanto, no se recomienda que aquellos "
-#~ "sin\n"
-#~ "una cantidad importante de experiencia elijan esta clase de instalaci贸n.\n"
-#~ "\n"
-#~ "Este manual documentar谩 la instalaci贸n completa de tipo \"Experto\" Si\n"
-#~ "elige la clase de instalaci贸n \"Recomendada\", simplemente ignore los "
-#~ "pasos\n"
-#~ "que se presentan aqu铆 que s贸lo se aplican a la clase de instalaci贸n\n"
-#~ "\"Experto\"."
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Ahora est谩 conectado a Internet."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid "Please be patient. This operation can take several minutes."
-#~ msgstr ""
-#~ "Por favor, tenga paciencia. Esta operaci贸n puede tomar varios minutos."
+#~ msgid "files sending by FTP"
+#~ msgstr "Env铆o de archivos por FTP"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "Your new Mandrake Linux operating system is currently being installed.\n"
-#~ "Depending on the number of packages you will be installing and the speed "
-#~ "of\n"
-#~ "your computer, this operation could take from a few minutes to a\n"
-#~ "significant amount of time.\n"
-#~ "\n"
-#~ "Please be patient."
-#~ msgstr ""
-#~ "En este momento se est谩 instalando su sistema operativo Mandrake Linux\n"
-#~ "nuevo. Dependiendo de la cantidad de paquetes que instalar谩 y de la\n"
-#~ "velocidad de su computadora, esta operaci贸n puede tomar desde unos pocos\n"
-#~ "minutos hasta una cantidad de tiempo significativa.\n"
-#~ "\n"
-#~ "Por favor, tenga paciencia."
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
-#~ "\n"
-#~ "You will be presented the list of available resolutions and color depth\n"
-#~ "available for your hardware. Choose the one that best suit your needs "
-#~ "(you\n"
-#~ "will be able to change that after installation though). When you are\n"
-#~ "satisfied with the sample shown in the monitor, click \"OK\". A window "
-#~ "will\n"
-#~ "then appear and ask you if you can see it.\n"
-#~ "\n"
-#~ "If you are doing an \"Expert\" installation, you will enter the X\n"
-#~ "configuration wizard. See the corresponding section of the manual for "
-#~ "more\n"
-#~ "information about this wizard.\n"
-#~ "\n"
-#~ "If you can see the message during the test, and answer \"Yes\", then "
-#~ "DrakX\n"
-#~ "will proceed to the next step. If you cannot see the message, it simply\n"
-#~ "means that the configuration was wrong and the test will automatically "
-#~ "end\n"
-#~ "after 10 seconds, restoring the screen. Refer then to the video\n"
-#~ "configuration section of the user guide for more information on how to\n"
-#~ "configure your display."
-#~ msgstr ""
-#~ "X (por X Window System) es el coraz贸n de la interfaz gr谩fica de GNU/"
-#~ "Linux\n"
-#~ "en el que se apoyan todos los entornos gr谩ficos (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) que se incluyen con Mandrake Linux. En esta secci贸n,\n"
-#~ "DrakX intentar谩 configurar a X autom谩ticamente.\n"
-#~ "\n"
-#~ "Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
-#~ "antiguo (o muy nuevo). Si no falla, arrancar谩 X autom谩ticamente con la\n"
-#~ "mejor resoluci贸n posible dependiendo del tama帽o de su monitor. Luego\n"
-#~ "aparecer谩 una ventana que le pregunta si la puede ver.\n"
-#~ "\n"
-#~ "Si est谩 haciendo una instalaci贸n en modo \"Experto\", ingresar谩 al\n"
-#~ "asistente de configuraci贸n de X. Para m谩s informaci贸n sobre este "
-#~ "asistente\n"
-#~ "vea la secci贸n correspondiente del manual.\n"
-#~ "\n"
-#~ "Si puede ver el mensaje durante la prueba, y responde \"S铆\", entonces\n"
-#~ "DrakX continuar谩 con el paso siguiente. Si no puede ver el mensaje,\n"
-#~ "simplemente significa que la configuraci贸n no era la correcta y la "
-#~ "prueba\n"
-#~ "terminar谩 autom谩ticamente luego de 10 segundos, restaurando la pantalla.\n"
-#~ "Consulte la secci贸n de configuraci贸n de v铆deo de la gu铆a del usuario "
-#~ "para\n"
-#~ "m谩s informaci贸n sobre como configurar su pantalla."
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Volver a ejecutar 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Construir initrd mkinitrd -f /boot/initrd-%s.img %s."
-#~ msgid "Switching between ALSA and OSS help"
-#~ msgstr "Ayuda para cambiar entre ALSA y OSS"
+#~ msgid "Write %s"
+#~ msgstr "Escribir %s"
-#~ msgid "quit"
-#~ msgstr "salir"
+#~ msgid "Copy %s to %s"
+#~ msgstr "Copiar %s a %s"
-#~ msgid "save"
-#~ msgstr "guardar"
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Copiar %s a %s.old"
-#~ msgid "Detecting devices ..."
-#~ msgstr "Detectando dispositivos..."
+#~ msgid "ttf fonts conversion"
+#~ msgstr "Conversi贸n de tipograf铆as TTF"
-#~ msgid "Test ports"
-#~ msgstr "Probar puertos"
+#~ msgid "Fonts conversion"
+#~ msgstr "Conversi贸n de tipograf铆as"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
index 177282092..e088ac2e4 100644
--- a/perl-install/share/po/et.po
+++ b/perl-install/share/po/et.po
@@ -6,8 +6,8 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-02-24 11:57+0200\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-04-22 11:57+0200\n"
"Last-Translator: Riho Kurg <rx@linux.ee>\n"
"Language-Team: Estonian <et@li.org>\n"
"MIME-Version: 1.0\n"
@@ -15,966 +15,1917 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Partitsioonidelt haakepunktide otsimine"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "kui on 'jah', kontrollib suid root failide lisamist/eemaldamist."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tPuhasta=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "v玫rguprinteri port"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Sisestage palun flopi:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Kasutaja kaupa jagamise lubamine rakendab gruppi \"fileshare\". \n"
-"Sellesse gruppi kasutajate lisamiseks saab tarvitada userdraket."
+"Tabeli varukoopia ei ole sama suurusega\n"
+"Kas ikkagi j盲tkata?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Katkesta"
+msgid "Which username"
+msgstr "Milline kasutajanimi"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Userdrake k盲ivitamine"
+msgid "Which type of entry do you want to add?"
+msgstr "Millisele sektorile soovite seda t玫sta?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Taasta partitsioonitabel"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "CUPS serveril \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Paigaldusj盲rgsed s盲tted"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Kasutage pigem ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "T眉眉p"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Kas lubada kasutajatel jagada m玫ningaid oma katalooge?\n"
-"Lubamine v玫imaldab kasutajal seda teha lihtsalt kl玫psuga sildil \"Jaga\" "
-"Konqueroris ja Nautiluses.\n"
"\n"
-"\"Isetehtud\" lubab m盲盲rata seda kasutajate kaupa.\n"
+"脺le kanda ei saa ka printereid, mis on seadistatud nende tootjate pakutud "
+"PPD failidega v玫i loomup盲raste CUPS draiveritega."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Puudub kohustuslik pakett %s"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Eksportida saab NFS v玫i Samba abil. Palun valige, kumba kasutada."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Teie s眉steemiga on 眉hendatud\n"
+"\n"
+"%s%s\n"
+"printer(id)"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakett %s tuleks kindlasti paigaldada. Kas soovite seda teha?"
+msgid "Central African Republic"
+msgstr "Kesk-Aafrika Vabariik"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Isetehtud"
+msgid "Gateway device"
+msgstr "L眉眉sipoolne seade"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Lubatud k玫igile kasutajatele"
+msgid "Net Method:"
+msgstr "V玫rgumeetod:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Jagamiseta"
+msgid "Ethernetcard"
+msgstr "V玫rgukaart"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Veel..."
+msgid "Parameters"
+msgstr "Parameetrid"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "See on saadaolevate maade t盲ielik nimekiri"
+msgid "Auto-detect"
+msgstr "Automaattuvastus"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Palun valige oma maa."
+msgid "Interface:"
+msgstr "Liides:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "R茅union"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Valige paigaldusmeetod"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Maa"
+msgid "on CDROM"
+msgstr "CDROM-ile"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "K玫ik keeled"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Paistab, et s眉steem ei ole Internetti 眉hendatud.\n"
+"Palun seadistage 眉hendus uuesti."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Unicode kasutamine vaikimisi"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"脺hendage oma printer Linux-serveri k眉lge ja lubage oma Windowsi masina(te)l "
+"sellega 眉hendust v玫tta kliendina.\n"
+"\n"
+"Kas soovite t玫esti j盲tkata selle printeri seadistamist?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Valgevene"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Viga faili %s kirjutamisel"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Mandrake Linux toetab paljusid keeli. Valige keeled, mida\n"
-"soovite paigaldada. Kui paigaldus on l玫petatud ja Te teete\n"
-"s眉steemile taask盲ivituse, saate neid kasutada."
+"Apmd on kasutusel p玫hiliselt s眉learvutites akude t盲ituvuse j盲lgimiseks.\n"
+"Samuti suudab see aku t眉hjenemisel s眉steemi viisakalt seisata."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Valige palun kasutatav keel."
+msgid "Use tape to backup"
+msgstr "Varundamine lindile"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Valige palun k盲ivitatav aknahaldur:"
+msgid "The following packages are going to be installed"
+msgstr "Paigaldamiseks on valitud j盲rgmised paketid"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Valige vaikimisi kasutaja:"
+msgid "CUPS configuration"
+msgstr "CUPSi s盲tted"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Kas soovite kasutada seda omadust?"
+msgid "Hong Kong"
+msgstr "Hongkong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Teie arvutit saab seada vaikimisi kasutaja sisenemisele."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Vaikimisi sisenemine"
+msgid "Moving"
+msgstr "Paigutan 眉mber"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Ikoon"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackupi tegevus %s vahendusel:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "K盲surida"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Salas玫na (uuesti)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Interneti眉henduse n玫ustaja\n"
+"\n"
+"N眉眉d hakkame interneti眉hendust seadistama.\n"
+"Kui Te ei soovi automaatset tuvastamist, siis j盲tke see m盲rkimata.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Salas玫na"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Kasutajanimi"
+msgid "Lebanon"
+msgstr "Liibanon"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "P盲risnimi"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Kasutaja 玫ige"
+msgid "Stop"
+msgstr "Peata"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Tehtud"
+msgid "Edit selected host"
+msgstr "Muuda valitud masinat"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sisesta kasutaja\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "CD-seade on m盲盲ramata!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Lisa kasutaja"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgaaria (foneetiline)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "See kasutajanimi on juba lisatud"
+msgid "The DHCP start ip"
+msgstr "DHCP vahemiku alguse ip"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "See kasutajanimi on liiga pikk"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Alglaaduri peas盲tted"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Kasutajanimi tohib sisaldada ainult v盲ikesi t盲hti, numbreid ning m盲rke '-' "
-"ja '_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Palun andke kasutajanimi"
+msgid "Tape"
+msgstr "Lint"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Salas玫na on liiga lihtne"
+msgid "Scanning network..."
+msgstr "V玫rgu uurimine..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Palun proovige veel"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr "Selle valikuga v玫ite taastada kataloogi /etc suvalise versiooni."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Salas玫nad ei klapi"
+msgid "Malaysia"
+msgstr "Malaisia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(juba lisatud %s)"
+msgid "Swiss (French layout)"
+msgstr "艩veitsi (Prantsuse asetus)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "ligip盲盲s kompileerimisvahenditele"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid eba玫nnestus (v玫ib-olla puudub 'raidtools'?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "ligip盲盲s v玫rgut枚枚vahenditele"
+msgid "Webcam"
+msgstr "Veebikaamera"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "(Teise taseme) CPU puhvri suurus"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "ligip盲盲s administreerimisfailidele"
+msgid "Soundcard"
+msgstr "Helikaart"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "\"su\" lubamine"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Faili tr眉kkimiseks k盲surealt (terminaliaken) kasutage k盲sku \"%s <fail>\".\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "ligip盲盲s rpm vahenditele"
+msgid "Level %s\n"
+msgstr "Tase %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "ligip盲盲s X-i rakendustele"
+msgid "Luxembourg"
+msgstr "Luksemburg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Praegu on kasutusel sellised kirjed.\n"
-"Te v玫ite neid lisada ning olemasolevaid muuta."
+"\n"
+" DrakBackup deemoni raport\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Muu OS (windows...)"
+msgid "Iran"
+msgstr "Iraan"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Muu OS (MacOS...)"
+msgid "Bus"
+msgstr "Siin"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Muu OS (SunOS...)"
+msgid "Iraq"
+msgstr "Iraak"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "V玫imalik kohtv玫rgu aadressi konflikt %s seadistuses!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Millisele sektorile soovite seda t玫sta?"
+msgid "Configuring..."
+msgstr "Seadistamine..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Selline pealdis on juba kasutusel"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr ""
+"Interneti眉henduse jagamine on juba seadistatud ja see on praegu aktiivne."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Teil peab olema juurpartitsioon"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Enamiku moodsate TV-kaartide puhul avastab GNU/Linuxi kerneli bttv-moodul "
+"automaatselt 玫iged parameetrid.\n"
+"Kui kaart siiski valesti tuvastati, v玫ite siin m盲盲rata 玫ige tuuneri ja "
+"kaardi t眉眉bi. Valige vajadusel korral sobivad tv-kaardi parameetrid"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Teil peab olema kerneli laadepilt"
+msgid "Password (again)"
+msgstr "Salas玫na (uuesti)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "T眉hi kirjet盲his ei ole lubatud"
+msgid "Search installed fonts"
+msgstr "Paigaldatud fontide otsimine"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Vaikimisi"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "IP aadress"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd suurus"
+msgid "Choose the sizes"
+msgstr "Valige suurused"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Lisand"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Vigaste andmete loend:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Pealdis"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Teie modem ei ole toetatud.\n"
+"Ehk saate abi aadressilt http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Ebaturvaline"
+msgid "Choose another partition"
+msgstr "Valige muu partitsioon"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Tabel"
+msgid "Current user"
+msgstr "Praegune kasutaja"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Juur"
+msgid "Username"
+msgstr "Kasutajanimi"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Read-write"
+msgid "Left \"Windows\" key"
+msgstr "Vasakpoolne \"Windows\"-klahv"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "Dhcpd serveri seadistamine"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Graafikamood"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Kasutusel kataloogis:\n"
+" ainult faili v玫i kataloogi omanik saab seda kustutada"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Laadefail"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "Vaikimisi OS?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " Novelli serveril \"%s\", printer \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "OF laadimine lubatud?"
+msgid "Remove a module"
+msgstr "Eemalda moodul"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "CD-lt laadimine lubatud?"
+msgid "Password"
+msgstr "Salas玫na"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ajapiirang kerneli laadimisel"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Argumendid: (max, inactive=-1)\n"
+"\n"
+"M盲盲rab salas玫na aeguma \\fImaks.\\fP n p盲eva p盲rast ning viivituse enne "
+"muutmist \\fImittekehtivaks\\fP."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware viivitus"
+msgid "Advanced Configuration"
+msgstr "Muud s盲tted"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Alglaadimisseade"
+msgid "Scanning on your HP multi-function device"
+msgstr "Skaneerimine Teie HP mitmefunktsionaalsel seadmel"
#: ../../any.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Initsialiseerimisteade"
+msgid "Root"
+msgstr "Juur"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Eelistatav alglaadur"
+msgid "Choose an existing RAID to add to"
+msgstr "Vali olemasolev RAID, millele lisada"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Alglaaduri peas盲tted"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "T眉rgi (modernne \"Q\" mudel)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "LiLo s玫numit ei leitud"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "S盲te ``Piira k盲surea suvandeid'' ei ole kasutatav ilma salas玫nata"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Kerneli p盲ise automaatne regenereerimine partitsioonil /boot\n"
+"/usr/include/linux/{autoconf,version}.h jaoks"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Anna m盲lu suurus megabaitides"
+msgid "if needed"
+msgstr "kui vaja"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "V玫imalda mitu profiili"
+msgid "Restore Failed..."
+msgstr "Taastamine eba玫nnestus..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Kui vaja, t盲psustage RAM suurust (leitud %d MB)"
+msgid "/Autodetect _jazz drives"
+msgstr "/_JAZZ ketaste automaattuvastus"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Puhasta /tmp igal laadimisel"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Kirjeldus:\n"
+"\n"
+" DrakBackup aitab Teie s眉steemist varukoopiaid teha.\n"
+" Seadistamise ajal saate valida \n"
+"\t- s眉steemsed failid, \n"
+"\t- kasutaja failid, \n"
+"\t- muud failid \n"
+"\tv玫i kogu s眉steemi ... ja muud (nt Windowsi partitsioonid)\n"
+"\n"
+" DrakBackup v玫imaldab varundada j盲rgmistele andmekandjatele:\n"
+"\t- k玫vaketas.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (automaatse alglaadimise, p盲盲ste- \n"
+"\t- ja automaatse paigalduse v玫imalustega).\n"
+"\t- FTP.\n"
+"\t- rsync.\n"
+"\t- Webdav.\n"
+"\t- lint.\n"
+"\n"
+" DrakBackup v玫imaldab taastada s眉steemi\n"
+" kasutaja m盲盲ratud kataloogi.\n"
+"\n"
+" Vaikimisi salvestatakse k玫ik varukoopiad\n"
+" kataloogi /var/lib/drakbackup.\n"
+"\n"
+" Seadistustefail:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Taastamise k盲ik:\n"
+" \n"
+" Taastamise ajal eemaldab DrakBackup Teie\n"
+" originaalkataloogi ja kontrollib, et 眉kski varukoopia\n"
+" ei oleks vigane. Soovitatav on enne taastamist\n"
+" ette v玫tta veel 眉ks varundamine.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Alglaadimisflopi loomine"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"J盲rgnev l玫ppkasutaja litsents on eksimuste v盲ltimiseks originaalkeeles!\n"
+"\n"
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "restrict"
-msgstr "piiratud"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"edenemisriba 眉lemise vasaku\n"
+"nurga x-koordinaat"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Piira k盲surea suvandeid"
+msgid "Current interface configuration"
+msgstr "Liidese praegused s盲tted"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LDP - Otsetr眉kkimisdeemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Kui Teil on ISA kaart, siis peaks j盲rgmised v盲盲rtused olema 玫iged.\n"
+"\n"
+"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
+"v盲盲rtusi.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "脛ra tr眉ki 眉htegi testlehek眉lge"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "APIC sunnitakse mitte toimima"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI lubamine"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Salas玫na on liiga l眉hike (peaks olema v盲hemalt %d t盲hem盲rki)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Ooteaeg alglaadimisel"
+msgid "[keyboard]"
+msgstr "[klaviatuur]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "kompaktne"
+msgid "FTP proxy"
+msgstr "FTP vahendaja"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Compact"
-msgstr "Kompaktne"
+msgid "Install List"
+msgstr "Paigaldusloend"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Alglaaduri paigaldus"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Muuda\n"
+"taastamise asukohta"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Partitsiooni algusesse"
+msgid "Show only for the selected day"
+msgstr "Ainult valitud p盲eval n盲itamine"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Ketta algusesse (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServi 眉levaade\n"
+"\t\t\t \n"
+" - Etherboot-suutlike laadepiltide loomine:\n"
+" \t\tKerneli alglaadimiseks etherboodi vahendusel tuleb luua eriline "
+"kernel/initrd laadepilt.\n"
+" \t\tSuure osa t枚枚st teeb 盲ra mkinitrd ning drakTermServ on vaid "
+"graafiline\n"
+" \t\tkasutajaliides, aitamaks neid laadepilte hallata ja/v玫i "
+"kohandada.\n"
+"\n"
+" - /etc/dhcpd.conf haldamine:\n"
+" \t\tEt klient saaks teha alglaadimise v玫rgust, vajab iga klient "
+"kirjet failis dhcpd.conf,\n"
+" \t\tmis omistab masinale IP aadressi ja v玫rgulaadepildi. "
+"drakServTerm aitab neid\n"
+" \t\tkirjeid luua/eemaldada.\n"
+"\t\t\t\n"
+" \t\t(PCI kaartidel v玫ib laadepilt puududa - etherboot n玫uab "
+"korrektset laadepilti.\n"
+" \t\tSilmas v玫iks pidada ka seda, et kui etherboot laadepilti ootab, "
+"eeldab ta nime\n"
+" \t\tkujul boot-3c59x.nbi, mitte aga boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t\n"
+" \t\tT眉眉piline dhcpd.conf-i l玫ik, mis toetab kettata t枚枚jaama, n盲eb "
+"v盲lja selline:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t/*type fat;*/\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk.nbi"
+"\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tKuigi v玫ib kasutada ka IP aadresside valimikku, selle asemel et "
+"m盲盲rata igale\n"
+"\t\t\tkliendi masinale eraldi kirje, v玫imaldab fikseeritud aadress "
+"kasutamine siiski\n"
+"\t\t\tpruukida ClusterNFS pakutavaid kliendikeskseid seadistustefaile.\n"
+"\t\t\t\n"
+"\t\t\tM盲rkus: kirjet \"/*type\" kasutab ainult drakTermServ. Kliendid "
+"v玫ivad olla \n"
+"\t\t\tkas \"thin\"*/ v玫i 'fat'. \"脮huke\" klient kasutab enamikku tarkvara "
+"serveril xdmcp\n"
+"\t\t\tvahendusel, \"paksud\" kliendid aga jooksutavad takrvara enamasti "
+"kliendi\n"
+"\t\t\tmasinal. 脮hukeste klientide jaoks kirjutatakse eraldi inittab-fail\n"
+"\t\t\t/etc/inittab\\$\\$IP=kliendi_IP\\$\\$. 脮hukeste klientide puhul "
+"muudetakse xdmcp\n"
+"\t\t\tv玫imaldamiseks s眉steemi seadetefaile xdm-config, kdmrc ja gdm.conf. "
+"Kuiv玫rd\n"
+"\t\t\txdmcp kasutamisega kaasnevad teatud turvaprobleemid, muudetakse faile\n"
+"\t\t\thosts.deny ja hosts.allow, et piirata ligip盲盲su kohalikule "
+"alamv玫rgule.\n"
+"\t\t\t\n"
+"\t\t\tM盲rkus: server tuleb peatada/k盲ivitada p盲rast kliendi lisamist v玫i "
+"muutmist.\n"
+"\t\t\t\n"
+" - /etc/exports haldamine:\n"
+" \t\tClusterNFS v玫imaldab eksportida juurfailis眉steemi kettata "
+"t枚枚jaamadele.\n"
+" \t\tdrakTermServ loob korrektse kirje, mis v玫imaldab kettata "
+"t枚枚jaamadele\n"
+" \t\tanon眉眉mset ligip盲盲su juurfailis眉steemile.\n"
+"\n"
+" \t\tT眉眉piline ekspordikirje ClusterNFS tarbeks n盲eb v盲lja selline:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tkus SUBNET/MASK m盲盲rab Teie v玫rku.\n"
+" \t\t\n"
+" - /etc/shadow\\$\\$CLIENT\\$\\$ haldamine:\n"
+" \t\tEt kasutajad saaksid kettata t枚枚jaamalt s眉steemi logida, peab "
+"nende kirje\n"
+" \t\tfailis /etc/shadow leiduma ka failis /etc/shadow\\$\\$CLIENTS\\$"
+"\\$.\n"
+" \t\tdrakTermServ aitab s眉steemi kasutajaid faili lisada v玫i sealt "
+"eemaldada.\n"
+"\n"
+" - Kliendi failid /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tClusterNFS abil v玫ivad igal kettata t枚枚jaamal olla oma "
+"unikaalsed seadetefailid\n"
+" \t\tserveri juurfailis眉steemis. Tulevikus aitab drakTermServ neid "
+"luua.\n"
+"\n"
+" - Kliendi s眉steemi seadetefailid:\n"
+" \t\tClusterNFS abil v玫ivad igal kettata t枚枚jaamal olla oma "
+"unikaalsed seadetefailid\n"
+" \t\tserveri juurfailis眉steemis. Tulevikus aitab drakTermServ luua "
+"iga kliendi kohta\n"
+" \t\tselliseid faile, nagu /etc/modules.conf, /etc/sysconfig/mouse, /"
+"etc/sysconfig/keyboard.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ seadistab selle faili, et see saaks t枚枚tada koos "
+"laadepildega, mille\n"
+" \t\ttekitab mkinitrd-net, samuti kirjed failis /etc/dhcpd.conf, et "
+"pakkuda igale kettata\n"
+" \t\tt枚枚jaamale alglaadimiseks laadepilti.\n"
+"\n"
+" \t\tT眉眉piline tftp seadetefail n盲eb v盲lja selline:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t{\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tSiin tehtud muudatused v玫rreldes vaikepaigaldusega muudavad "
+"t眉histamislipu\n"
+" \t\tv盲盲rtuseks 'no' ning kataloogirajaks muudetakse /var/lib/"
+"tftpboot, kuhu mkinitrd\n"
+" \t\tsalvestab oma laadepildid.\n"
+"\n"
+" - Etherbooti flopide/CD-de loomine:\n"
+" \t\tKettata t枚枚jaamad vajavad kas ROM-laadepilti v玫rguliidesel v玫i "
+"alglaadimisflopit\n"
+" \t\tv玫i -CD-d alglaadimise k盲ivitamiseks. drakTermServ aitab neid "
+"laadepilte luua,\n"
+" \t\ttuginedes kliendi masina v玫rguliidesele.\n"
+" \t\t\n"
+" \t\tLihtne n盲ide alglaadimisflopi loomisest k盲sitsi 3com 3c509 "
+"jaoks:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
+"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kuhu soovite alglaaduri paigaldada?"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LiLo/grub paigaldamine"
+msgid "Logs"
+msgstr "Logifailid"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO paigaldamine"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(M盲rkus: paralleelporte ei tuvastata)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "J盲ta vahele"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "Flopil"
+msgid "What kind of card do you have?"
+msgstr "Millist t眉眉pi kaart Teil on?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Juurpartitsiooni algusesse"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Turvalisus"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Otsustasite paigaldada alglaaduri partitsioonile.\n"
-"See eeldab, et Teil on juba alglaadur k玫vakettal, millelt Te alglaadimise "
-"sooritate (nt System Commander).\n"
-"\n"
-"Milliselt kettalt Te alglaadimise teete?"
+"Valikute seadistamiseks ja tr眉kkimist枚枚de haldamiseks saab kasutada ka "
+"graafilist liidest \"xpdq\".\n"
+"Kui kasutate t枚枚lauakeskkonnana KDE-d, on Teil t枚枚laual \"paanikanupp\", "
+"ikoon nimetusega \"PEATA printer!\", millele kl玫psates peatatakse otsekohe "
+"k玫ik tr眉kkimist枚枚d. See on kasulik n盲iteks paberiummistuste esinemisel.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Alglaadimisketta loomine..."
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Pange flopi seadmesse %s"
+msgid "Unknown"
+msgstr "Tundmatu"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Valige flopiseade, mida kasutada alglaadimisketta tegemiseks"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "See server on juba nimekirjas ja seda ei ole v玫imalik uuesti lisada.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Teine flopiseade"
+msgid "Network Configuration"
+msgstr "V玫rgu s盲tted"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First floppy drive"
-msgstr "Esimene flopiseade"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Flopiseade ei ole k盲ttesaadav"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protokoll 眉lej盲盲nud maailma tarbeks\n"
+"Ilma D-kanalita (liisitud liinid)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "V玫ti %s peab olema arv!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "M盲rguanne"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Isetehtud alglaadimisketas annab Teile v玫imaluse laadida Linux flopilt\n"
-"s玫ltumata tavalisest alglaadijast. See v玫ib abiks olla, kui Te ei soovi\n"
-"LiLo-t (grubi) k玫vakettale kirjutada v玫i m玫ni muu operatsioonis眉steem LiLo\n"
-"盲ra kustutab v玫i ei 玫nnestu LiLo-t Teie riistvara peal kasutada.\n"
-"Alglaadimisflopi on kasutatav ka h盲daabikettana, kui k玫vakettal oleva\n"
-"failis眉steemiga peaks mingi 玫nnetus juhtuma.\n"
-"Hoidke end ja Teid hoiab ka Jumal!\n"
-"%s"
+"Argumendid: (arg)\n"
+"\n"
+" Aktiveerib/keelab igap盲evase turvakontrolli."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Argumendid: (arg)\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
+"Crontab ja at lubamine/keelamine kasutajatele. Lubatud kasutajad "
+"kirjutatakse failidesse /etc/cron.allow ja /etc/at.allow (vt man at(1) ja "
+"crontab(1))."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Te ei ole seadistanud X-i. Kas Te t玫esti ei taha seda teha?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
msgstr ""
+"Printeri seadistused peaksid toimima t盲iesti automaatselt. Kui printer "
+"tuvastati valesti v玫i Te eelistate seadistusi korrigeerida, l眉litage sisse "
+"\"K盲sitsiseadistamine\"."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Mis t眉眉pi partitsioonid teete?"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+"FTP kaudu saadetud faililoend: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Liides"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
+"valikute kirjeldus:\n"
+"\n"
+" - S眉steemsete failide varundamine:\n"
+" \n"
+"\tSee v玫imalus laseb varundada kataloogi /etc,\n"
+"\tmis sisaldab k玫iki Teie seadistustefaile. Olge\n"
+"\tpalun taastamise ajal ettevaatlik ja 盲rge kirjutage\n"
+"\t眉le j盲rgmisi faile:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab \n"
+"\n"
+" - Kasutaja failide varundamine: \n"
+"\n"
+"\tSee v玫imalus laseb valida k玫ik kasutajad, keda\n"
+"\tsoovite varundada.\n"
+"\tKettaruumi kokkuhoiu huvides on soovitatav mitte\n"
+"\tkaasata veebilehitseja puhvrit.\n"
+"\n"
+" - Muude failide varundamine: \n"
+"\n"
+"\tSee v玫imalus lubab salvestada veelgi enam\n"
+"\tandmeid, kuid praegu ei ole selle puhul veel\n"
+"\tv玫imalik kasutada muutvarundamist.\t\t\n"
+" \n"
+" - Muutvarundamine:\n"
+"\n"
+"\ttMuutvarundamine on k玫ige v玫imsam kasutatav\n"
+"\tvalik, mis lubab esmalt varundada k玫ik andmed\n"
+"\tja seej盲rel ainult vahepeal muutunud andmed.\n"
+"\tSel moel on v玫imalik ka taastamise ajal taastada\n"
+"\tkonkreetse daatumiga andmed.\n"
+"\tKui Te ei ole seda v玫imalust valinud, kustutatakse\n"
+"\tenne iga varundamist vanad varukoopiad. \n"
"\n"
"\n"
-"(HOIATUS! Te kasutate juurpartitsioonil XFS-i, mist玫ttu\n"
-"alglaadimisketta loomine 1,44MB-sele flopile t玫en盲oliselt\n"
-"ei 玫nnestu, sest XFS vajab v盲ga suurt draiverit)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Isetehtud alglaadimisketas annab Teile v玫imaluse laadida Linux flopilt\n"
-"s玫ltumata tavalisest alglaadijast. See v玫ib abiks olla, kui Te ei soovi\n"
-"SILO-t k玫vakettale kirjutada v玫i m玫ni muu operatsioonis眉steem SILO\n"
-"盲ra kustutab v玫i ei 玫nnestu SILO-t Teie riistvara peal kasutada.\n"
-"Alglaadimisflopi on kasutatav ka h盲daabikettana, kui k玫vakettal oleva\n"
-"failis眉steemiga peaks mingi 玫nnetus juhtuma.\n"
-"Hoidke end ja Teid hoiab ka Jumal!\n"
+"Argumendid: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
-"\"Olgu\"."
+"Syslog-i raportite lubamine/keelamine konsoolile 12. \\fIexpr\\fP on \n"
+"avaldis, mis kirjeldab, mida logida (vt l盲hemalt syslog.conf(5)) ja \n"
+"dev seade, kuhu logiraport saata."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Alglaadurit ei ole v玫imalik paigaldada partitsioonile %s\n"
+msgid "comma separated strings"
+msgstr "komaga eraldatud stringi"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "/boot on liiga t盲is"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "Nende masinate sk盲nnereid saab selle arvutiga kasutada:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Valik laetakse automaatselt %d sekundi jooksul"
+msgid "Messages"
+msgstr "S玫numid"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "suvandeid enne laadimist ja 'c' veel enam."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Tundmatu|CPH06X (bt878) [paljud tootjad]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Enter laeb Teie valiku, 'e' laseb muuta"
+msgid "POP and IMAP Server"
+msgstr "POP ja IMAP server"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kasutage valiku tegemiseks klahve %c ja %c."
+msgid "Mexico"
+msgstr "Mehhiko"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"
+msgid "Model stepping"
+msgstr "Mudeli alamt眉眉p"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Kas Teil on ikka m玫ni %s liides?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LiLo tekstiresiimis"
+msgid "Switzerland"
+msgstr "艩veits"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LiLo graafikaresiimis"
+msgid "Brunei Darussalam"
+msgstr "Brunei"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "V玫rguprinteri (lpd) s盲tted"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Tere tulemast! Laadimisel aitab Teid %s!\n"
+"GNU/Linux on paljude kasutajatega s眉steem, mis t盲hendab, et igal kasutajal\n"
+"v玫ivad olla oma eelistused, failid jne. Selle kontseptsiooni kohta leiab "
+"l盲hemat\n"
+"infot \"Kasutaja k盲siraamatust\". Kuid erinevalt administraatorist ei ole\n"
+"kasutajal 玫igust muuta midagi muud kui vaid oma faile ja enda seadistusi.\n"
+"Te peaksite looma ka endale v盲hemalt 眉he tavakasutaja konto, millele sisse\n"
+"logida igap盲evategevuseks. Kuigi v玫ib olla v盲gagi praktiline logida iga "
+"p盲ev\n"
+"sisse administraatorina, v玫ib see olla ka v盲ga ohtlik! V盲himgi viga v玫ib sel"
+"\\ puhul t盲hendada, et s眉steem lakkab t枚枚tamast. Kui teete t玫sise vea "
+"tavakasutajana,\n"
+"v玫ite kaotada ainult m玫ningat infot, kuid s眉steem j盲盲b t枚枚korda.\n"
"\n"
-"Valige nimekirjast eelistatav OS,\n"
-"vaikimisi oodake %d sekundit.\n"
+"K玫igepealt tuleks sisestada oma tegelik nimi. See ei ole m玫istagi "
+"kohustuslik - tegelikult v玫ite sisestada, mida soovite. DrakX v玫tab esimese "
+"sisestatud s玫na\n"
+"ning kopeerib selle v盲ljale \"%s\". See on siis nimi, mille all konkreetne "
+"kasutaja\n"
+"saab ennast s眉steemi sisse logida. Seda saab ka hiljem muuta. Seej盲rel "
+"tuleb\n"
+"sisestada parool. Privileegideta (tavalise) kasutaja parool ei ole "
+"turvalisuse m玫ttes\n"
+"nii oluline kui administraatori oma, kuid pole p玫hjust sellest ka "
+"naljanumbrit teha:\n"
+"l玫ppeks on ju m盲ngus Teie failid.\n"
"\n"
+"Kui kl玫psate nupule \"%s\", v玫ite lisada veel nii palju kasutajaid, kui "
+"vaja.\n"
+"Lisage 眉ks kasutaja iga inimese kohta, kes Teie arvutit kasutab. Kui olete "
+"k玫ik\n"
+"soovitud sisestanud, vajutage nupule \"%s\".\n"
+"\n"
+"Kl玫ps nupule \"%s\" v玫imaldab muuta kasutajale m盲盲ratavat vaike-\"shelli\"\n"
+"(vaikimisi on see bash).\n"
+"\n"
+"Kui olete kasutajate lisamise l玫petanud, pakutakse Teile valida kasutaja, "
+"kel on\n"
+"玫igus logida s眉steemi automaatselt, kui arvuti algk盲ivituse teeb. Kui see "
+"v玫imalus\n"
+"Teile huvi pakub (ja kohalik turvalisus muret ei valmista), valige "
+"meelep盲rane\n"
+"kasutaja ning aknahaldur ja vajutage \"%s\". Kui Te sellest aga huvitatud ei "
+"ole,\n"
+"eemaldage m盲rge kastist \"%s\"."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper puudub"
+msgid "Configure Internet Access..."
+msgstr "Interneti眉henduse seadistamine..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu puudub"
+msgid "Norway"
+msgstr "Norra"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Hetkt玫mmised asuvad p盲rast paigaldust asukohas %s"
+msgid "Danish"
+msgstr "Taani"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Hetkt玫mmiseid ei saa teha enne partitsioneerimist"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr "L眉litab automaatselt alglaadimise ajal sisse NumLock-i."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d sekundit"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Palun andke IP parameetrid selle masina jaoks.\n"
+"K玫ik read tuleb sisestada IP-aadressi kujul\n"
+"(n盲iteks 12.34.56.78)"
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minut"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linuxi paigalduspaketid on jagatud mitme CD-ROMi vahel. DrakX\n"
+"suudab 盲ra tunda, kui valitud pakett asub muul CD-ROMil, ning v盲ljastab "
+"siis\n"
+"seesoleva CD ja palub sisestada selle, mida parajasti vaja l盲heb."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutit"
+msgid "Processors"
+msgstr "Protsessorid"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulgaaria"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr "V玫rgukaarti pole valitud!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard ja Jan Mayen"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Seadistamisel esines probleeme.\n"
+"Kontrollige oma 眉hendust net_monitor v玫i mcc abil. Kui 眉hendus ei t枚枚ta, "
+"tuleks see uuesti seadistada."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "USA"
+msgid "partition %s is now known as %s"
+msgstr "partitsioon %s kannab n眉眉d nime %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Austria"
+msgid "Backup Other files..."
+msgstr "Muude failide varundamine..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Itaalia"
+msgid "SMB server IP"
+msgstr "SMB serveri IP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Holland"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Rootsi"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Ketta %s partitsioonitabel salvestatakse!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norra"
+msgid "Installing HPOJ package..."
+msgstr "HPOJ pakettide paigaldamine..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Kreeka"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Isetehtud alglaadimisketas annab Teile v玫imaluse laadida Linux flopilt\n"
+"s玫ltumata tavalisest alglaadijast. See v玫ib abiks olla, kui Te ei soovi\n"
+"LiLo-t (grubi) k玫vakettale kirjutada v玫i m玫ni muu operatsioonis眉steem LiLo\n"
+"盲ra kustutab v玫i ei 玫nnestu LiLo-t Teie riistvara peal kasutada.\n"
+"Alglaadimisflopi on kasutatav ka h盲daabikettana, kui k玫vakettal oleva\n"
+"failis眉steemiga peaks mingi 玫nnetus juhtuma.\n"
+"Hoidke end ja Teid hoiab ka Jumal!\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Saksamaa"
+msgid ", USB printer \\#%s"
+msgstr ", USB printer \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "T拧ehhi"
+msgid "Latvian"
+msgstr "L盲ti"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgia"
+msgid "monthly"
+msgstr "iga kuu"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "Prantsusmaa"
+msgid "Module name"
+msgstr "Mooduli nimi"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "K盲ivitub alglaadimisel"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Muutvarunduse kasutamine (vanu varukoopiaid ei asendata)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "%s avamine kirjutamiseks eba玫nnestus: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Ketta algusesse (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Pole midagi teha"
+msgid "Joystick"
+msgstr "Juhtkang"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Te ei saa haakepunkti %s jaoks kasutada kr眉ptitud failis眉steemi"
+msgid "Use Unicode by default"
+msgstr "Unicode kasutamine vaikimisi"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"See haakepunkt vajab t玫elist (ext2/ext3, reiserfs, xfs v玫i jfs) "
-"failis眉steemi\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "GNU/Linuxi kerneli moodul, mis k盲sitleb seda seadet"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "See kataloog peab j盲盲ma kokku juurfailis眉steemiga"
+msgid "Trying to rescue partition table"
+msgstr "Proovin p盲盲sta partitsioonitabelit"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Te ei saa haakepunkti %s jaoks kasutada LVM loogilist ketast"
+msgid "Option %s must be an integer number!"
+msgstr "V玫ti %s peab olema t盲isarv!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
-"Ilma /boot partitsioonita ei ole v玫imalik sellist s眉steemi laadida.\n"
-"Lisage kindlasti /boot partitsioon!"
+"Teil tuleb t盲ita kirjed:\n"
+"%s"
-# c-format
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Haakepunktile %s on juba partitsioon m盲盲ratud\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ei saa kiiruuendust alustada !!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Haakepunkti nimi tohib sisaldada vaid t盲hti ja numbreid"
+msgid "Name: "
+msgstr "Nimi: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Haakepunktid peavad algama kaldkriipsuga (/)"
+msgid "16 million colors (24 bits)"
+msgstr "16 miljonit v盲rvi (24 bitti)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ei ole kasutatav alla 32MB partitsioonidel"
+msgid "Allow all users"
+msgstr "Lubatud k玫igile kasutajatele"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ei ole kasutatav alla 16MB partitsioonidel"
+msgid "The official MandrakeSoft Store"
+msgstr "MandrakeSofti ametlik kauplusladu"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Muudan suurust"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kaabli眉hendus"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Kasutaja"
#: ../../fsedit.pm:1
#, c-format
@@ -993,1322 +1944,255 @@ msgstr ""
"\n"
"Kas olete n玫us k玫igi partitsioonide kaotamisega?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Viga"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Uus varundamine enne taastamist (ainult muutvarunduse puhul)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "server"
+msgid "Printer on parallel port \\#%s"
+msgstr "Printer paralleelpordis \\#%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "koos /usr-ga"
+msgid "Name"
+msgstr "Nimi"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "lihtne"
+msgid "mkraid failed"
+msgstr "mkraid eba玫nnestus"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Vormindan saaleala %s"
+msgid "Button 3 Emulation"
+msgstr "Emuleeri 3. hiirenuppu"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "viga %s lahutamisel: %s"
+msgid "Sending files..."
+msgstr "Failide saatmine..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "partitsiooni %s haakimine kataloogis %s eba玫nnestus"
+msgid "Israeli (Phonetic)"
+msgstr "Iisraeli (foneetiline)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Partitsiooni %s haakimine"
+msgid "access to rpm tools"
+msgstr "ligip盲盲s rpm vahenditele"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "%s kontrollimine"
+msgid "edit"
+msgstr "muuda"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Partitsiooni %s vormindamine"
+msgid "You must choose/enter a printer/device!"
+msgstr "Printeri/seadme valimine/sisestamine on kohustuslik!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Faili %s loomine ja vormindamine"
+msgid "Permission problem accessing CD."
+msgstr "CD-le ligip盲盲sul tekkis loaprobleem."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ei oska seadet %s vormindada t眉眉pi %s"
+msgid "Phone number"
+msgstr "Sissehelistamiskeskuse number"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s vormindamine seadmel %s eba玫nnestus"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Viga: helikaardi juhtprogramm \"%s\" ei ole loendis"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Valige \"J盲rgmine ->\", kui soovite kustutada k玫ik sellel kettal asuvad\n"
-"partitsioonid. Ettevaatust, p盲rast \"J盲rgmine ->\" kl玫psamist ei ole enam\n"
-"v玫imalik sellelt kettalt andmeid taastada.\n"
-"\n"
-"Katkestamiseks valige \"<- Eelmine\", mis katkestab tegevuse ilma andmeid\n"
-"ja k盲esoleval k玫vakettal olevaid partitsioone kustutamata."
+msgid "Printer name, description, location"
+msgstr "Printeri nimi, kirjeldus, asukoht"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valige k玫vaketas, mida soovite puhastada oma uue Mandrake Linuxi\n"
-"paigaldamiseks. Ettevaatust, k玫ik sellel leiduvad andmed h盲vitatakse\n"
-"ega ole enam taastatavad."
+msgid "USA (broadcast)"
+msgstr "USA (tele)"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Siin n盲idatakse mitmeid Teie masinat puudutavaid parameetreid. S玫ltuvalt\n"
-"riistvarast v玫ite siin n盲ha k玫iki v玫i osa j盲rgmistest kirjetest. Iga kirje\n"
-"juures on 盲ra toodud elemendid, mida on v玫imalik seadistada, ning Teie "
-"masinal\n"
-"praegu kehtiv seadistus. Selle muutmiseks vajutage nupule \"Seadista\".\n"
-"\n"
-" * \"Klaviatuur\": v玫imalus kontrollida klaviatuuritabeli seadistusi\n"
-"ja neid vajaduse korral muuta.\n"
-"\n"
-" * \"Maa\": v玫imalus kontrollida oma riigi valikut. Kui Te ei asu\n"
-"vaikimisi m盲盲ratud maal, vajutage nuppu \"Seadista\" ja valige uus\n"
-"riik. Kui Teie riiki ei ole ilmuvas nimekirjas, vajutage nupule\n"
-"\"Veel\", mis avab riikide t盲isnimekirja.\n"
-"\n"
-" * \"Ajav枚枚nd\": DrakX arvab vaikimisi ajav枚枚ndi 盲ra valitud keele p玫hjal. "
-"Kuid\n"
-"nagu klaviatuuri puhul, v玫ib ka siin ette tulla, et Te ei viibi n盲iteks "
-"maal,\n"
-"millele valitud keel vastab. Sellisel juhul tuleks kl玫psata nupul \"Seadista"
-"\",\n"
-"et seada kell selle ajav枚枚ndi ajale, kus Te parajasti viibite.\n"
-"\n"
-" * \"Hiir\": v玫imalus kontrollida hiire seadistusi ja neid vajadusel muuta.\n"
-"\n"
-" * \"Printer\": kl玫ps nupul \"Seadista\" avab printeri seadistamise "
-"n玫ustaja.\n"
-"Seda, kuidas uut printerit seadistada, vaadake l盲hemalt k盲ivitusjuhiste "
-"vastavast\n"
-"peat眉kist. Siin n盲htav on sarnane paigaldusajal n盲htuga.\n"
-"\n"
-" * \"Helikaart\": kui s眉steemis leiti helikaart, n盲idatakse seda.\n"
-"Kui m盲rkate, et siintoodud helikaart pole see, mis tegelikult on\n"
-"s眉steemi paigaldatud, vajutage nuppu ja valige sobiv juhtprogramm.\n"
-"\n"
-" * \"Graafiline liides\": vaikimisi m盲盲rab DrakX Teie graafilise liidese\n"
-"kuvatiheduseks \"800x600\" v玫i \"1024x768\". Kui see Teile ei sobi,\n"
-"vajutage nupule \"Seadista\" ja valige m玫ni muu v玫imalus.\n"
-"\n"
-" * \"TV-kaart\": kui s眉steemis leiti TV-kaart, n盲idatakse seda.\n"
-"Kui Teil on TV-kaart, aga seda ei leitud, vajutage nupule \"Seadista\"\n"
-"ning p眉眉dke see k盲sitsi m盲盲rata.\n"
-"\n"
-" * \"ISDN-kaart\": kui s眉steemis leiti ISDN-kaart, n盲idatakse seda.\n"
-"Nupule \"Seadista\" vajutades saab muuta sellega seonduvaid parameetreid.\n"
-"\n"
-" * \"V玫rk\": Kui soovite kohe seadistada juurdep盲盲su Internetti v玫i "
-"kohtv玫rku,\n"
-"saate seda teha siin nupule vajutades.\n"
-"\n"
-" * \"Turvatase\": see pakub v玫imaluse m盲盲rata 眉mber eelmisel sammul ()\n"
-"paika pandud turvatase.\n"
-"\n"
-" * \"Tulem眉眉r\": kui kavatsete oma masina Internetti 眉hendada, kuluks\n"
-"盲ra enda kaitsmine r眉nnakute eest tulem眉眉ri paikapanemisega. Vaadake\n"
-"眉ksikasju, kuidas tulem眉眉ri seadistada, k盲ivitusjuhiste vastavast\n"
-"peat眉kist.\n"
-"\n"
-" * \"Alglaadur\": kui soovite muuta alglaaduri seadistusi, vajutage\n"
-"sellele nupule. See on m玫eldud siiski vaid kogenud kasutajatele.\n"
-"\n"
-" * \"Teenused\": saate t盲pselt kontrollida, millised teenused Teie\n"
-"masinal t枚枚tavad. Kui kavatsete kasutada oma masinat serverina, kuluks\n"
-"盲ra seadistused 眉le vaadata."
+"Valige palun varundamiseks\n"
+"kasutatav andmekandja."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"Helikaart\": kui s眉steemis leiti helikaart, n盲idatakse seda siin.\n"
-"Kui m盲rkate, et n盲idatav helikaart ei ole mitte see, mis s眉steemis\n"
-"Teie teada tegelikult on, kl玫psake nuppu ja valige uus juhtprogramm."
+msgid "Use Xinerama extension"
+msgstr "Kasuta Xinerama laiendusi"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot on alglaadur NewWorld Macintosh riistvara jaoks. See suudab laadida "
-"nii\n"
-"GNU/Linuxi, MacOSi kui MacOSX, kui need on Teil olemas. Tavaliselt\n"
-"tuvastatakse ja paigaldatakse need operatsioonis眉steemid korrektselt.\n"
-"Kui see nii ei ole, saate praegu k盲sitsi kirjeid lisada. Kuid olge "
-"parameetrite\n"
-"valikul h盲sti hoolas ja ettevaatlik.\n"
-"\n"
-"Yabooti p玫hivalikud on j盲rgmised:\n"
-"\n"
-" * Initsialiseerimisteade: tavaline tekstis玫num, mida n盲idatakse enne\n"
-"alglaadimise k盲surea ilmumist.\n"
-"\n"
-" * Alglaadimisseade: n盲itab, kuhu soovite panna info, mida l盲heb vaja\n"
-"GNU/Linuxi algk盲ivituseks. 脺ldiselt tuleks selle info tarbeks juba varem "
-"luua\n"
-"alglaadimispartitsioon.\n"
-"\n"
-" * Open Firmware viivitus: Erinevalt LiLo-st on yabooti puhul v玫imalik kaks\n"
-"viivitust. Esimest m玫玫detakse sekundites ning selle ajal on Teil v玫imalik "
-"valida\n"
-"CD v玫i OF alglaadimise, MacOS-i v玫i Linuxi vahel.\n"
-"\n"
-" * Kernel alglaadimise viivitus: See on sarnane LiLo alglaadimise "
-"viivitusele.\n"
-"P盲rast Linuxi valimist tekib 0,1-sekundiline viivitus, enne kui\n"
-"valitakse kerneli vaikekirjeldus.\n"
-"\n"
-" * Lubada alglaadimine CD-lt?: Selle valimine v玫imaldab alglaadimise "
-"k盲sureale\n"
-"``C'' kirjutades valida CD.\n"
-"\n"
-" * Lubada OF alglaadimine?: Selle valimine v玫imaldab alglaadimise k盲sureale\n"
-"``N'' kirjutades valida Open Firmware.\n"
-"\n"
-" * OS vaikimisi: Siin v玫ite valida, milline operatsioonis眉steem laaditakse "
-"vaikimisi,\n"
-"kui Open Firmware viivitus l盲bi saab."
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Yabooti jaoks on v玫imalik lisada kirjeid kas teiste operatsioonis眉steemide,\n"
-"alternatiivsete kernelite v玫i h盲daolukorras alglaadimist玫mmise leidmiseks.\n"
-"\n"
-"Teiste operatsioonis眉steemide kirje sisaldab vaid pealdist ja "
-"juurpartitsiooni.\n"
-"\n"
-"Linuxi puhul on v玫imalusi rohkem:\n"
-"\n"
-" * Pealdis: lihtsalt nimetus, mida tuleb kirjutada, kui yaboot p盲rib teilt "
-"alglaadimise\n"
-"ajal, mida laadida.\n"
-"\n"
-" * Laadepilt: alglaaditava kerneli nimetus, tavaliselt vmlinux laiendiga v玫i "
-"ilma selleta.\n"
-"\n"
-" * Juur: juurseade ehk Teie Linuxi ``/''.\n"
-"\n"
-" * Lisand: eriti Apple'i puhul kasutatakse kerneli lisa sageli "
-"videoriistvara l盲htestamiseks\n"
-"v玫i hiirenupu emuleerimiseks klaviatuuril, sest Apple'i riistvarapoodides on "
-"vaid\n"
-"harva n盲ha kahe v玫i kolme nupuga hiiri. M玫ned n盲ited:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: seda v玫imalust v玫ib kasutada kas initsialiseerimismoodulite "
-"laadimiseks\n"
-"enne alglaadimisseadmeni j玫udmist v玫i ramdisk-laadepildi laadimiseks\n"
-"h盲daolukorras.\n"
-"\n"
-" * Initrd-size: ramdiski suurus on tavaliselt 4096 baiti. Kui teil peaks "
-"minema\n"
-"tarvis suuremat, saab seda siin m盲盲rata.\n"
-"\n"
-" * Read-write: tavaliselt initsialiseeritakse juurpartitsioon esmalt vaid "
-"loetavana,\n"
-"et sooritada failis眉steemi kontroll enne seda, kui s眉steem ``ellu 盲rkab''.\n"
-"Siin saab seda muuta.\n"
-"\n"
-" * NoVideo: kui Apple'i videoriistvara peaks v盲ga t玫siseid probleeme "
-"tekitama,\n"
-"saab siin valida v玫imaluse teha alglaadimine resiimis ``novideo'' ehk siis\n"
-"native frame-buffer toega.\n"
-"\n"
-" * Vaikimisi: m盲盲rab antud kirje vaikimisi Linuxi valikuks, mida saab "
-"alglaadida\n"
-"yabooti k盲surea ilmudes vaid vajutusega klahvile ENTER. Kui vajutate "
-"alglaadimise\n"
-"valikute uurimiseks [Tab], on see kirje t盲histatud t盲rniga (``*'')."
+"Mkbootdiski korrektne sulgemine eba玫nnestus: \n"
+" %s \n"
+" %s"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Esmalt otsib DrakX 眉les k玫ik Teie arvuti IDE-seadmed, p眉眉des samal ajal\n"
-"tuvastada ka PCI siini SCSI-liideseid. Kui viimaseid leitakse ja vastav(ad)\n"
-"draiver(id) on teada, siis laetakse ja paigaldatakse k玫ik vajalik "
-"automaatselt.\n"
-"\n"
-"Riistvara tuvastamine ei pruugi alati siiski 玫nnestuda ja kui see nii "
-"peaks \n"
-"minema, palub DrakX Teil teatada, kas masinas on m玫ni PCI SCSI-liides.\n"
-"\n"
-"Kui peate oma adapteri k盲sitsi m盲盲rama, k眉sib DrakX, kas soovite m盲盲rata\n"
-"ka selle parameetrid. Siin oleks m玫tet lasta tegutseda DrakX-l, mis proovib\n"
-"j盲rele liidese spetsiifilised omadused, mida see initsialiseerimiseks "
-"vajab.\n"
-"Tavaliselt 玫nnestub see edukalt.\n"
-"\n"
-"Kui automaatne parameetrite otsimine ei t枚枚ta, tuleb liides k盲sitsi "
-"seadistada.\n"
-"Selleks tutvuge palun l盲hemalt oma SCSI liidese dokumentatsiooniga\n"
-"v玫i k眉sige abi riistvara m眉眉jalt."
+msgid "West Europe"
+msgstr "L盲盲ne-Euroopa"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Siin saate valida oma arvutile tr眉kkimiss眉steemi. Teised "
-"operatsioonis眉steemid\n"
-"v玫ivad Teile pakkuda vaid 眉ht s眉steemi, kuid Mandrake Linuxi puhul saate\n"
-"valida tervelt kahe seast.\n"
-"\n"
-" * \"pdq\" - mis t盲hendab ``tr眉ki kohe'' (``print, don't queue'') - tuleks "
-"valida siis,\n"
-"kui Teil on printeriga otse眉hendus, Te ei soovi n盲ha mingeid j盲rjekordi ja "
-"Teil\n"
-"ei ole v玫rgus asuvaid printereid. V玫rkude puhul on \"pdq\" m玫nev玫rra aeglane "
-"ja\n"
-"tal v玫ib esineda tegutsemisraskusi. Kui see on Teie esimene retk GNU/Linuxi\n"
-"maailma, valige \"pdq\".\n"
+"[V脮TMED] [RAKENDUSE_NIMI]\n"
"\n"
-" * \"CUPS\" - ``tavaline UNIXi tr眉kkimiss眉steem'' (``Common Unix Printing\n"
-"System'') - on hiilgav valik tr眉kkimiseks Teie kohalikul printeril ja veel "
-"nii pooles\n"
-"maailmas. See on lihtne s眉steem, mis v玫ib olla nii kliendiks kui serveriks "
-"iidsele\n"
-"tr眉kkimiss眉steemile \"lpd\". See on ka 眉hilduv varasemate s眉steemidega. "
-"\"CUPS\"\n"
-"suudab teha palju asju, kuid p玫hitegutsemine on sama lihtne kui \"pdq\" "
-"puhul.\n"
-"Kui Teil on vajadus emuleerida \"lpd\"-serverit, tuleb sisse l眉litada\n"
-"\"cups-lpd\"-deemon. \"CUPSil\" on ka mitu graafilist kasutajaliidest\n"
-"tr眉kkimiseks v玫i printeri seadistamiseks.\n"
-"Kui leiate hiljem, et siinkohal langetatud valik polnud vahest k玫ige parem,\n"
-"siis saate seda muuta Mandrake juhtimiskeskuses PrinterDrake abil."
+"V脮TMED:\n"
+" --help - n盲itab k盲esolevat abiteadet.\n"
+" -report - rakendus peab olema 眉ks Mandrake t枚枚riistadest\n"
+" -incident - rakendus peab olema 眉ks Mandrake t枚枚riistadest"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LiLo ja grub on GNU/Linuxi alglaadurid. Tavaliselt k盲ib siin k玫ik t盲iesti\n"
-"automaatselt. DrakX uurib ketta alglaadimissektorit ja talitab vastavalt\n"
-"sellele, mida ta sealt leiab:\n"
-"\n"
-" * kui leitakse Windowsi alglaadimissektor, asendatatakse see grub/LiLo\n"
-"alglaadimissektoriga. Nii v玫ite laadida kas GNU/Linuxi v玫i m玫ne muu OS-i.\n"
-"\n"
-" * kui leitakse grub-i v玫i LiLo alglaadimissektor, asendatakse see uuega.\n"
-"\n"
-"Kui DrakX ei suuda asjast aru saada, k眉sitakse Teie k盲est, kuhu alglaadur\n"
-"paigutada.\n"
-"\n"
-"\"Alglaadimisseade\": enamasti ei peaks muutma vaikev盲盲rtust (\"Ketta\n"
-"avasektor (MBR)\"), aga soovi korral saab alglaaduri paigaldada ka\n"
-"teisele k玫vakettale (\"/dev/hdb\") v玫i isegi flopile (\"Flopil\")."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 versioon %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Kui olete m盲盲ranud alglaaduri 眉ldised parameetrid, n盲idatakse loendit\n"
-"alglaadimise ajal kasutatavatest valikutest.\n"
-"\n"
-"Kui masinale on paigaldatud veel m玫ni operatsioonis眉steem, lisatakse see\n"
-"automaatselt alglaaduri men眉眉sse. Siin saate olemasolevaid valikuid oma\n"
-"maitse j盲rgi h盲盲lestada. Valige kirje ja kl玫psake nupul \"Muuda\" selle\n"
-"muutmiseks. \"Lisa\" v玫imaldab luua uue kirje, \"Eemalda\" olemasoleva\n"
-"kustutada ning \"Tehtud\" viib Teid paigalduse j盲rgmise sammu juurde.\n"
-"\n"
-"Teil v玫ib muidugi olla ka soov mitte anda kellelegi ligip盲盲su teistele\n"
-"operatsioonis眉steemidele, millisel juhul v玫ite vastavad kirjed kustutada.\n"
-"Aga siis l盲heb Teil kindlasti vaja alglaadimisketast, et ka ise neile ligi "
-"p盲盲seda!"
+msgid "Copying %s"
+msgstr "%s kopeerimine"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"See dialoog aitab t盲pselt h盲盲lestada alglaadimist:\n"
-"\n"
-" * \"Alglaaduri valik\": siin on kolm valikut:\n"
-"\n"
-" * \"GRUB\": kui eelistate grubi (tekstimen眉眉).\n"
-"\n"
-" * \"LiLo graafilisena\": kui eelistate LiLot graafilisel kuju.\n"
-"\n"
-" * \"LiLo tekstiresiimis\": kui eelistate LiLot teksti kujul.\n"
-"\n"
-" * \"Alglaadimisseade\": enamasti ei ole s眉gavat m玫tet muuta vaikimisi "
-"valikut\n"
-"(\"/dev/hda\"), aga kui Te v盲ga soovite, v玫ib alglaaduri paigaldada ka "
-"teisele\n"
-"k玫vakettale (\"/dev/dhdb\") v玫i isegi flopikettale (\"/dev/fd0\").\n"
-"\n"
-" * \"Viivitus\": arvutile alglaadimist tehes pakutakse Teile v玫imalust "
-"v盲ikeseks\n"
-"pausiks, mille jooksul saab alglaadimismen眉眉st valida m玫ne muu kirje kui\n"
-"vaikimisi pakutu.\n"
-"\n"
-"!! Pange t盲hele, et kui Te otsustate alglaadurit mitte paigaldada (kl玫psates "
-"siin\n"
-"nupule \"Katkesta\"), peate kuidagi leidma mooduse, kuidas oma Mandrake\n"
-"Linux siiski t枚枚le saada! Ja p盲ris hea oleks, kui Te kindlalt teaksite, mida "
-"teete,\n"
-"enne kui m玫nda siin pakutud v玫imalust muuta. !!\n"
-"\n"
-"Kl玫psuga nupul \"Muud\" saab n盲ha veel mitmeid valikuid, mis on m玫eldud\n"
-"kogenud kasutajatele."
+msgid "Choose color"
+msgstr "V盲rvi valimine"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"N眉眉d on k盲tte j玫udnud k玫ige olulisem hetk Teie arvuti turvalisuse "
-"tagamisel:\n"
-"Teil tuleb m盲盲rata \"administraatori\" parool. Administraator haldab kogu\n"
-"s眉steemi ja ainult temal on 玫igus uuendusi ette v玫tta, kasutajaid lisada, "
-"muuta\n"
-"kogu s眉steemi seadistusi ja nii edasi. Ehk teisis玫nu - administraator v玫ib "
-"teha\n"
-"k玫ike! Seep盲rast tuleks parool valida selline, mida oleks raske 盲ra arvata.\n"
-"DrakX 眉tleb Teile, kui parool tundub olevat liiga lihtne. Te v玫ite muidugi "
-"j盲tta\n"
-"ka parooli sisestamata, aga me soovitame v盲ga tungivalt seda siiski teha - \n"
-"kasv玫i juba sel p玫hjusel, et kuigi Te paigaldate endale GNU/Linuxi "
-"s眉steemi,\n"
-"ei t盲henda see veel, et vigu ette ei v玫iks tulla. Kuna administraator v玫ib\n"
-"k玫iki piiranguid muuta ning vahel tahtmatultki kustutada oma hooletu\n"
-"tegevusega k玫ik andmed mingilt partitsioonilt, on p盲ris oluline, et\n"
-"administraatoriks saamine ei oleks eriti lihtne.\n"
-"\n"
-"Parool v玫ib koosneda nii t盲htedest kui numbritest ja peab olema v盲hemalt\n"
-"8 (kaheksa) m盲rki pikk. 脛rge pange kunagi administraatori parooli kirja - "
-"see\n"
-"v玫ib muuta ligip盲盲su Teie s眉steemile v玫玫rastele liiga h玫lpsaks.\n"
-"\n"
-"V盲ike soovitus - 盲rge siiski parooli liiga keeruliseks v玫i pikaks ajage,\n"
-"sest l玫ppeks peaksite seda ju suutma ka meelde j盲tta!\n"
-"\n"
-"Kui Te parooli sisestate, seda ekraanil ei n盲idata. Te peate selle "
-"sisestama\n"
-"kaks korda, mis v盲ldib kirjutamisvea v玫imaluse. Siiski, kui teete 眉hesuguse\n"
-"vea kaks korda j盲rjest, on just see \"vigane\" parool, mida Teilt oodatakse\n"
-"administraatorina sisselogimisel.\n"
-"\n"
-"Ekspertresiimis p盲ritakse Teie k盲est, kas soovite 眉hendust m玫ne\n"
-"autentimisserveriga (nt NIS v玫i LDAP).\n"
-"\n"
-"Kui Teie v玫rgus on kasutusel LDAP, NIS v玫i PDC Windowsi domeeni autentimise\n"
-"teenused, valige neist sobilik autentimismeetodiks. Kui Te aga ei juhtu "
-"teadma,\n"
-"mida teha, p枚枚rduge oma v玫rgu administraatori poole.\n"
-"\n"
-"Kui arvuti ei ole 眉hendatud 眉htegi administreeritavasse v玫rku, on m玫ttekas\n"
-"valida autentimisviis \"Kohalikud failid\"."
+msgid "Dominican Republic"
+msgstr "Dominikaani Vabariik"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Palun valige 玫ige port. N盲iteks MS Windowsi \"COM1\" kannab\n"
-"GNU/Linuxis nime \"ttyS0\"."
+msgid "Swaziland"
+msgstr "Svaasimaa"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"Tavaliselt tuvastab DrakX h玫lpsasti, mitme nupuga hiirt Te kasutate. Kui\n"
-"see v盲lja ei tule, eeldatakse, et Teil on kahe nupuga hiir, ning "
-"kasutatakse\n"
-"kolmanda nupu emuleerimist. Kahenupulisel hiirel saab kolmandat nuppu\n"
-"\"vajutada\" 眉heaegselt vasakut ja paremat nuppu vajutades. DrakX tuvastab\n"
-"automaatselt, kas tegemist on PS/2, jadapordi v玫i USB-hiirega.\n"
-"\n"
-"Kui soovite muuta hiiret眉眉pi, valige pakutud nimekirjast sobiv t眉眉p.\n"
-"\n"
-"Kui valite m玫ne muu hiiret眉眉bi kui vaikimisi m盲盲ratu, palutakse Teil seda\n"
-"testida. Kasutage nuppe ja ratast kontrollimaks, et valik oli 玫ige. Kui\n"
-"hiir ei k盲itu korralikult, vajutage t眉hikuklahvi v玫i klahvi [Return], mis "
-"viib\n"
-"Teid tagasi dialoogi ja lubab sooritada uue valiku.\n"
-"\n"
-"Vahel ei 玫nnestu rattaga hiirt automaatselt tuvastada. Siis tuleb see "
-"loendist\n"
-"k盲sitsi valida. Kontrollige, et valite 玫igesse porti 眉hendatud hiiret眉眉bi. "
-"Kui\n"
-"vajutate nupule \"J盲rgmine ->\", n盲idatakse hiire kujutist. Siis tuleb Teil "
-"liigutada\n"
-"hiireratast, et see korrektselt aktiveerida. Seej盲rel testige, kas k玫ik "
-"nupud\n"
-"ja liigutused toimivad korralikult."
+msgid "Set-UID"
+msgstr "Set-UID"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Esimene samm on meelep盲rase keele valik. Siin saate valida keele,\n"
-"mida kasutada paigaldamisel ja hilisemas t枚枚s. Valige esmalt maa,\n"
-"kus asute, ning seej盲rel meelep盲rane keel.\n"
-"\n"
-"Kl玫psates nupul \"Muud\", v玫ite valida muid keeli, mida Teie t枚枚jaamale\n"
-"paigaldada. Teiste keelte valikul paigaldatakse vastava keele rakenduste\n"
-"ja dokumentatsiooni failid. Kui Teie masinal t枚枚tab n盲iteks kasutajaid\n"
-"Hispaaniast, valige puuvaates p玫hikeeleks eesti keel ning sektsioonis\n"
-"\"Muud\" m盲rkige 盲ra \"Hispaania|Hispaania\".\n"
-"\n"
-"Paigaldada v玫ib ka mitu keelt. Te v玫ite neid valida mitu v玫i kas v玫i k玫ik,\n"
-"m盲rkides 盲ra kasti \"K玫ik keeled\". Keele toe valimine t盲hendab vastavaid\n"
-"t玫lkeid, fonte, 玫igekirja kontrollijaid jne. Lisaks v玫imaldab kasti\n"
-"\"Unicode kasutamine vaikimisi\" m盲rkimine sundida s眉steemi kasutama\n"
-"Unicode'i (UTF-8). Arvestage siiski, et see on esialgu eksperimentaalne\n"
-"v玫imalus. Kui valite erinevaid kodeeringuid n玫udvaid keeli, paigaldatakse\n"
-"Unicode toetus nagunii.\n"
-"\n"
-"脺helt keelelt teisele l眉litumiseks v玫ite administraatorina anda k盲su\n"
-"\"/usr/sbin/localedrake\", mis v玫imaldab muuta kogu s眉steemi keelt,\n"
-"v玫i tavakasutajana muuta ainult enda kohta k盲ivat keeleseadistust."
+msgid "Please check if you are using CDRW media"
+msgstr "M盲rkige palun, kui kasutate CDRW andmekandjat"
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Tavaliselt valib DrakX klaviatuuri Teie eest juba 盲ra (s玫ltuvalt valitud\n"
-"keelest). Kuid see v玫ib tekitada olukorra, kus Teil ikkagi pole just see\n"
-"klaviatuur, mida soovite: kui olete n盲iteks inglise keelt k玫nelev\n"
-"拧veitslane, v玫ite siiski soovida 艩veitsi asetusega klaviatuuri. Teine kohe\n"
-"p盲he tulev juhtum on inglise keele k玫neleja Quebecis. M玫lemal juhul on\n"
-"m玫tet naasta paigalduse selle sammu juurde ja valida loendist vajalik\n"
-"klaviatuur.\n"
-"\n"
-"Kl玫psake nupul \"Rohkem\", mis n盲itab k玫iki toetatud klaviatuure.\n"
-"\n"
-"Kui valite mitte-ladina t盲hestikuga klaviatuuri, palutakse Teil j盲rgmises\n"
-"dialoogis valida klahv v玫i klahvikombinatsioon, mis vahetab ladina ja\n"
-"mitte-ladina asetusega klaviatuuri."
+"Valige k玫vaketas, mida soovite puhastada oma uue Mandrake Linuxi\n"
+"paigaldamiseks. Ettevaatust, k玫ik sellel leiduvad andmed h盲vitatakse\n"
+"ega ole enam taastatavad."
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Seda sammu on vaja ainult siis, kui masinas leiti vana\n"
-"GNU/Linuxi partitsioon.\n"
-"\n"
-"DrakX soovib n眉眉d teada, kas tahate paigaldada uue s眉steemi v玫i uuendada\n"
-"olemasolevat Mandrake Linuxi s眉steemi:\n"
-"\n"
-" * \"Paigaldus\": 眉ldiselt p眉hib see vana s眉steemi t盲ielikult minema. Kui\n"
-"soovite muuta praeguseid partitsioone v玫i failis眉steemi, siis v玫iks seda "
-"v玫imalust\n"
-"kasutada. S玫ltuvalt kettajagamise viisist on v玫imalik ka m玫ningaid andmeid\n"
-"眉lekirjutamise eest p盲盲sta.\n"
-"\n"
-" * \"Uuendus\": see paigaldusviis v玫imaldab uuendada praegu olemasolevasse\n"
-"Mandrake Linuxi s眉steemi paigaldatud pakette. Kettajagamisskeemi ega "
-"kasutajate\n"
-"andmeid ei muudeta. Enamik seadistussamme on kasutatavad sarnaselt "
-"tavap盲rasele\n"
-"paigaldusele.\n"
-"\n"
-"V玫imalus \"Uuendus\" peaks toimima edukalt Mandrake Linuxi s眉steemides\n"
-"alates versioonist 8.1. Uuenduse proovimist varasemate versioonide peal\n"
-"me siiski ei soovita."
+msgid " on parallel port \\#%s"
+msgstr " paralleelpordis \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Maa\": v玫imaldab konrollida praegust maa valikut. Kui see ei ole riik,\n"
-"kus Te viibite, vajutage nuppu \"Seadista\" ja valige m玫ni muu maa. Kui\n"
-"Teie maad ei ole ilmuvas nimekirjas, vajutage nuppu \"Veel\", mis avab\n"
-"riikide t盲isnimekirja."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Kasutage valiku tegemiseks klahve %c ja %c."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Teie arvuti k玫vakettal on rohkem kui 眉ks Microsoft Windowsi partitsioon.\n"
-"Palun valige v盲lja see, mille suurust soovite Mandrake Linuxi jaoks muuta.\n"
-"\n"
-"Teie abistamiseks on igal partitsioonil n盲idatud \"Nimi Linuxis\", \"Nimi "
-"Windowsis\" ja \"Mahutavus\".\n"
-"\n"
-"\"Nimi Linuxis\" koosneb k玫vakettat眉眉bist, selle numbrist ja partitsiooni\n"
-"numbrist (n盲iteks \"hda1\").\n"
-"\n"
-"K玫vaketta t眉眉p on \"hd\", kui on tegemist IDE-kettaga, ja \"sd\", kui on\n"
-"tegemist SCSI-kettaga.\n"
-"\n"
-"K玫vaketta number on alati t盲ht \"hd\" v玫i \"sd\" j盲rel. IDE-ketastel:\n"
-"\n"
-" * \"a\" - esmase IDE kontrolleri 眉lem,\n"
-"\n"
-" * \"b\" - esmase IDE kontrolleri allutatu,\n"
-"\n"
-" * \"c\" - teisese IDE kontrolleri 眉lem,\n"
-"\n"
-" * \"d\" - teisese IDE kontrolleri allutatu.\n"
-"\n"
-"SCSI-ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
-"\n"
-"\n"
-"\"Nimi Windowsis\" on t盲ht, millega Microsoft Windows vastavat seadet\n"
-"t盲histab (esimene ketas v玫i partitsioon kannab nime \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Tavaline 2 nupuga hiir"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"N眉眉d peate valima partitsiooni(d), kuhu soovite Mandrake Linuxi paigaldada.\n"
-"Kui need on juba olemas kas GNU/Linuxi varasema paigalduse v玫i m玫ne muu\n"
-"kettajagamisvahendi tegevuse tulemusena, v玫ite kasutada olemasolevaid\n"
-"partitsioone. Vastasel juhul tuleb need luua.\n"
-"\n"
-"Partitsioon on loogiliselt eraldatud k玫vaketta piirkond, mille suurust\n"
-"ei ole v玫imalik hiljem, t枚枚tavas s眉steemis enam muuta. Samuti h盲vivad\n"
-"partitsiooni kustutamisel k玫ik sellel sisalduvad andmed.\n"
-"\n"
-"Et muuta seda tegevust lihtsamaks, on loodud n玫ustaja, mille soovitused\n"
-"on harilikult m玫istlikud.\n"
-"\n"
-"Partitsioonide loomiseks valige esmalt k玫vaketas. ``hda'' t盲hendab siin "
-"esimest\n"
-"IDE-ketast, ``hdb'' teist IDE-ketast, ``sda'' esimest SCSI-ketast ja nii "
-"edasi.\n"
-"\n"
-"Valitud ketta partitsioneerimiseks on j盲rgmised v玫imalused:\n"
-"\n"
-" * \"Puhasta k玫ik\": kustutatakse k玫ik olemasolevad partitsioonid\n"
-"sellel kettal.\n"
-"\n"
-" * \"Paiguta automaatselt\": sel juhul tekitatakse Linuxile vajalikud\n"
-"partitsioonid vabale kettapinnale automaatselt.\n"
-"\n"
-"\"Rohkem\": pakub m玫ned lisav玫imalused:\n"
-" * \"Salvesta partitsioonitabel\": salvestab partitsioonitabeli "
-"flopikettale.\n"
-"Sellest on kasu hilisemal partitsioonitabeli taastamisel, kui seda vaja\n"
-"peaks olema. Igal juhul on 盲盲rmiselt soovitav see samm ette v玫tta.\n"
-"\n"
-" * \"Taasta partitsioonitabel\": v玫imaldab taastada flopikettalt varem\n"
-"salvestatud partitsioonitabeli.\n"
-"\n"
-" * \"P盲盲sta partitsioonitabel\": kui partitsioonitabel on vigastatud, v玫ib\n"
-"proovida seda parandada. Palun 盲rge selle peale siiski liiga palju lootke.\n"
-"\n"
-" * \"Lae uuesti\": kui soovite t眉histada k玫ik enda tehtud muutused ja "
-"alustada algse partitsioonitabeliga.\n"
-"\n"
-" * \"Eemaldatava andmekandja automaathaakimine\": selle v玫imaluse\n"
-"t眉histamine sunnib kasutajaid k盲sitsi haakima ja lahutama eemaldatavaid\n"
-"andmekandjaid, st flopikettaid ja CD-ROMe.\n"
-"\n"
-" * \"N玫ustaja\": kui soovite uue partitsioonitabeli loomisel samm-sammulist\n"
-"juhatust. See on soovitatav, kui Te ei ole varem midagi sellist teinud.\n"
-"\n"
-" * \"T眉hista\": selle v玫imalusega saab t眉histada k玫ik tehtud muudatused.\n"
-"\n"
-" * \"Tava/Ekspertresiimi l眉litamine\": v玫imaldab partitsioonidega ette\n"
-"v玫tta lisaoperatsioone (t眉眉p, v玫tmed, vorming) ning pakub rohkem infot.\n"
-"\n"
-"Partitsiooni suurust m盲盲rates saate seda t盲pselt paika panna klaviatuuril\n"
-"asuvaid nooleklahve kasutades.\n"
-"\n"
-"M盲rkus: igale v玫imalusele p盲盲seb ligi ka klaviatuuri abil. Partitsioonidel\n"
-"saab liikuda klahvidega [Tab] ning 眉les-alla nooleklahvidega.\n"
-"\n"
-"Valitud partitsioonil on v玫imalikud j盲rgmised tegevused:\n"
-"\n"
-" * Ctrl-c uue partitsiooni loomine (kui valitud on t眉hi partitsioon).\n"
-"\n"
-" * Ctrl-d partitsiooni kustutamine.\n"
-"\n"
-" * Ctrl-m haakepunkti seadmine.\n"
-"\n"
-"L盲hemat infot erinevate failis眉steemit眉眉pide kohta leiab k盲siraamatu\n"
-"peat眉kist ext2FS.\n"
-"\n"
-"Kui paigaldus toimub PPC-masinale, tuleks luua v盲hemalt 1MB suurune\n"
-"v盲ike HFS ``bootstrap'' partitsioon, mida kasutab alglaadur yaboot. Kui Te\n"
-"aga teete selle partitsiooni natukene suuremaks (n盲iteks nii umbes 50MB),\n"
-"on see p盲ris hea koht, kuhu h盲daolukorraks paigutada tagavarakernel\n"
-"ja ramdisk-laadepildid."
+msgid "Remove the logical volumes first\n"
+msgstr "Eemalda enne kettar眉hmad (logical volumes)\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"N眉眉d on aeg valida masinale meelep盲rane turvatase. Rusikareeglina peaks\n"
-"turvatase olema seda k玫rgem, mida ligip盲盲sule avatum see on ja mida rohkem\n"
-"leidub sellel olulise t盲htsusega andmeid. Samas t盲hendab k玫rgem turvatase\n"
-"眉ldiselt kasutamislihtsuse kahanemist.\n"
-"\n"
-"Kui Te ei tea, mida valida, leppige pakutud v玫imalusega."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Valik laetakse automaatselt %d sekundi jooksul"
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"On t玫en盲oline, et praegu, kui Te paigaldate Mandrake Linuxit, on m玫ned\n"
-"paketid j玫udnud p盲rast v盲ljalaset juba uuenduskuuri 眉le elada. M玫nes on 盲ra\n"
-"parandatud paar v盲iksemat viga, m玫nes turvaprobleemid. Et v玫iksite neist\n"
-"uuendustest tulu l玫igata, on Teil n眉眉d v玫imalik need Internetist alla "
-"laadida.\n"
-"Kl玫psake \"Jah\", kui Teie interneti眉hendus t枚枚tab, v玫i \"Ei\", kui "
-"eelistate\n"
-"pakette uuendada millalgi hiljem.\n"
-"\n"
-"Kui valite \"Jah\", n盲idatakse Teile loendit kohtadega, kust uuendusi "
-"t玫mmata\n"
-"saab. Valige endale l盲him paik. Seej盲rel ilmub paketivaliku puu. Vaadake "
-"see\n"
-"眉le ning vajutage \"Paigalda\", kui soovite valitud paketi(d) alla laadida "
-"ja\n"
-"paigaldada, v玫i \"Katkesta\", kui Te ei soovi seda teha."
+"/etc/sysconfig/bootsplash kirjutamine eba玫nnestus\n"
+"Faili ei leitud."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Interneti眉hendus"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"K玫ik v盲rskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
-"ehk sinna tuleb luua failis眉steemid.\n"
-"\n"
-"Samuti v玫ib vormindada varem olemas olnud partitsioonid, kui soovite\n"
-"seal leiduvad andmed 盲ra kustutada.\n"
-"\n"
-"Pange t盲hele, et alati ei ole k玫igi vanade partitsioonide vormindamine\n"
-"vajalik. Kindlasti tuleb vormindada partitsioonid, kus varem asus \"/\", \"/"
-"usr\"\n"
-"v玫i \"/var\", aga kasutajate faile sisaldav \"/home\" v玫iks j盲盲da alles.\n"
-"\n"
-"Olge partitsioonide valikul hoolas. P盲rast vormindamist on k玫ik valitud\n"
-"partitsioonidel asunud andmed kustutatud ning neid ei ole v玫imalik "
-"taastada.\n"
-"\n"
-"Kl玫psake \"J盲rgmine ->\", kui olete vormindamiseks valmis.\n"
-"\n"
-"Kl玫psake \"<- Eelmine\", kui soovite valida oma uue Mandrake Linuxi "
-"s眉steemi\n"
-"paigaldamiseks m玫ne muu partitsiooni.\n"
-"\n"
-"Kl玫psake \"Muud\", kui soovite valida partitsioone, millel kontrollitaks "
-"halbade\n"
-"blokkide olemasolu."
+"tekstikasti y-koordinaat\n"
+"arvulises v盲ljenduses"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Ja n眉眉d ongi paigaldus selja taga ning Teie GNU/Linuxi s眉steem valmis "
-"t枚枚ks.\n"
-"Selleks tuleb vaid kl玫psata \"J盲rgmine ->\" ning arvuti teeb taask盲ivituse, "
-"mille j盲rel\n"
-"v玫ite valida, kas k盲ivitada GNU/Linux v玫i Windows (kui Teie arvutil on mitu\n"
-"s眉steemi).\n"
-"\n"
-"Nupp \"Muud\" pakub veel kaks v玫imalust:\n"
-"\n"
-" * \"Loo automaatpaigalduse flopi\": loob paigaldusflopi, mis sooritab kogu\n"
-"paigalduse ilma kasutajata, paigaldus ise on samasugune nagu 盲sja\n"
-"seljataha j盲盲nu.\n"
-"\n"
-" Selle valiku korral ilmub veel kaks erinevat v玫imalust:\n"
-"\n"
-" * \"脺mberm盲ngimine\". See on osaliselt automaatne, sest "
-"partitsioneerimisel\n"
-"(aga ka ainult seal) on v玫imalik sekkuda.\n"
-"\n"
-" * \"Automaatne\". T盲isautomaatne paigaldus: k玫vaketas kirjutatakse "
-"t盲ielikult\n"
-"uuesti, k玫ik varasemad andmed kustutatakse.\n"
-"\n"
-" See v玫imalus v玫ib olla kasulik, kui paigaldamine on kavas ette v玫tta "
-"paljudel\n"
-"眉hesugustel masinatel. L盲hemalt vaadake meie veebilehek眉ljel\n"
-"automaatpaigalduse sektsiooni.\n"
-"\n"
-" * \"Salvesta pakettide valik\"(*): salvestab paigalduse k盲igus valitud "
-"pakettide\n"
-"nimekirja. Kui n眉眉d v玫tate ette uue paigalduse, asetage flopi seadmesse "
-"ning\n"
-"k盲ivitage paigaldus klahvile [F1] vajutades abiekraani vahendusel, andes "
-"k盲su\n"
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Selleks l盲heb vaja FAT-vormingus flopit (sellise loomiseks GNU/Linuxis\n"
-"andke k盲sk \"mformat a:\")"
+"Praeguse printeri puhul kasutusk玫lblike valikute loendi vaatamiseks vajutage "
+"nupule \"Tr眉kkimisvalikute loend\"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Serverite k盲ivitamine..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Tr眉kitakse testlehek眉lg(i)..."
+
+# c-format
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Haakepunktile %s on juba partitsioon m盲盲ratud\n"
#: ../../help.pm:1
#, c-format
@@ -2329,51 +2213,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Olete j玫udnud punkti, kus peate otsustama, kuhu t盲pselt Mandrake Linux\n"
"oma k玫vakettal paigaldada. Kui k玫vaketas on t眉hi v玫i m玫ni muu\n"
@@ -2389,20 +2271,17 @@ msgstr ""
"S玫ltuvalt k玫vaketta omadustest on ketta jagamiseks ehk partitsioneerimiseks\n"
"mitmeid v玫imalusi.\n"
"\n"
-" * \"Kasuta vaba ruumi\": see partitsioneerib lihtsalt Teie t眉hja(d) "
-"k玫vaketta(d).\n"
+" * \"%s\": see partitsioneerib lihtsalt Teie t眉hja(d) k玫vaketta(d).\n"
"Mingeid edasisi k眉simusi ei esitata.\n"
"\n"
-" * \"Kasuta olemasolevat partitsiooni\": n玫ustaja avastas k玫vakettal "
-"v盲hemalt\n"
+" * \"%s\": n玫ustaja avastas k玫vakettal v盲hemalt\n"
"眉he Linuxi partitsiooni. Kui soovite seda/neid kasutada, valige see "
"v玫imalus.\n"
"Seej盲rel palutakse valida iga partitsiooniga seonduvad haakepunktid. "
"Vaikimisi\n"
"valitakse need juba ette 盲ra ja 眉ldiselt oleks m玫istlik neid mitte muuta.\n"
"\n"
-" * \"Kasuta vaba ruumi Windowsi partitsioonil\": kui k玫vakettale on "
-"paigaldatud\n"
+" * \"%s\": kui k玫vakettale on paigaldatud\n"
"Microsoft Windows ja see haarab enda alla kogu k玫vaketta, v玫ite luua vabale\n"
"alale nurgakese Linuxi andmetele. Selleks v玫ib h盲vitada Microsoft Windowsi\n"
"partitsiooni koos andmetega (vaata v玫imalusi \"Puhasta kogu ketas\" v玫i\n"
@@ -2421,8 +2300,7 @@ msgstr ""
"sellel on ka v盲hem ruumi andmete salvestamiseks v玫i uue tarkvara "
"paigaldamiseks.\n"
"\n"
-" * \"Puhasta kogu ketas\": kui soovite kustutada k玫ik andmed ja "
-"partitsioonid, mis\n"
+" * \"%s\": kui soovite kustutada k玫ik andmed ja partitsioonid, mis\n"
"k玫vakettal parajasti on, ning asendada need uue Mandrake Linuxi s眉steemiga, "
"on\n"
"see 玫ige valik. Aga tasub olla ettevaatlik, sest p盲rast selle valiku "
@@ -2431,14 +2309,13 @@ msgstr ""
"\n"
" !! Kui valite selle v玫imaluse, kaotate k玫ik k玫vakettal olevad andmed. !!\n"
"\n"
-" * \"Eemalda Windows\": see puhastab k玫vaketta senistest andmetest ja\n"
+" * \"%s\": see puhastab k玫vaketta senistest andmetest ja\n"
"k盲ivitab uue paigaldusprotsessi, luues k玫ik partitsioonid uuesti. Kaovad ka\n"
"k玫ik kettal olnud andmed.\n"
"\n"
" !! Kui valite selle v玫imaluse, kaotate k玫ik k玫vakettal olevad andmed. !!\n"
"\n"
-" ' \"Ekspertresiim\": valige see, kui soovite ise kontrollida k玫vaketta "
-"jagamist\n"
+" ' \"%s\": valige see, kui soovite ise kontrollida k玫vaketta jagamist\n"
"partitsioonideks. Kuid olge ettevaatlik - see on k眉ll v玫imas, aga ohte "
"sisaldav\n"
"valik, mille puhul v玫ib kergesti kaotada olemasolevad andmed. Seep盲rast ei\n"
@@ -2447,289 +2324,138 @@ msgstr ""
"\"Partitsioonide\n"
"haldamine\"."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"L玫puks k眉sitakse Teie k盲est, kas soovite kasutada graafilist t枚枚keskkonda\n"
-"kohe alglaadimisel. Pange t盲hele, et seda p盲ritakse ka siis, kui Te ei "
-"proovinudki\n"
-"seadistusi testida. On 眉sna ilmne, et vastus k玫lab \"Ei\", kui masina "
-"眉lesanne\n"
-"on tegutseda serverina v玫i kui Teid ei kippunud seadistamise ajal edu saatma."
+msgid "Ukraine"
+msgstr "Ukraina"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n"
-"kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n"
-"k玫ige enam vastab."
+msgid "Application:"
+msgstr "Rakendus:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"Kuvatihedus\n"
-"\n"
-" Siin saate valida Teie riistvaraga sobiva kuvatiheduse ja v盲rvis眉gavuse.\n"
-"Kui Te paigalduse j盲rel leiate, et siin valitu siiski ei k玫lba, saate seda\n"
-"hiljem muuta. Valitud seadistust n盲idatakse monitoril."
+msgid "External ISDN modem"
+msgstr "V盲line ISDN modem"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Monitor\n"
-"\n"
-" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt Teie masinaga\n"
-"眉hendatud monitori. Kui see ei peaks siiski 玫nnestuma, saate siin toodud\n"
-"nimekirjast valida monitori, mis Teil tegelikult on."
+msgid "if set to yes, report check result by mail."
+msgstr "kui on 'jah', annab kontrolli tulemustest teada meilitsi."
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Teie valik? (vaikimisi %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Probleemi otsimine"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / Piirkond"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (ehk X Window System) kujutab endast GNU/Linuxi graafilise "
-"kasutajaliidese\n"
-"tuuma ja s眉dant, millele toetuvad k玫ik Mandrake Linuxiga kaasas k盲ivad\n"
-"graafilised t枚枚keskkonnad (KDE, GNOME, AfterStep, WindowMaker jne).\n"
-"\n"
-"Siin n盲idatakse Teile tervet nimekirja parameetreid, mida saab muuta,\n"
-"et graafiline kasutajaliides oleks just Teile meelep盲rane: Videokaart\n"
-"\n"
-" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt masinale\n"
-"paigaldatud videokaardi. Kui see ei 玫nnestu, saate nimekirjast valida\n"
-"kaardi, mis tegelikult on masinale paigaldatud.\n"
-"\n"
-" Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n"
-"kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n"
-"k玫ige enam vastab.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt Teie masinaga\n"
-"眉hendatud monitori. Kui see ei peaks siiski 玫nnestuma, saate siin toodud\n"
-"nimekirjast valida monitori, mis Teil tegelikult on.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" Siin saate valida Teie riistvaraga sobiva kuvatiheduse ja v盲rvis眉gavuse.\n"
-"Kui Te paigalduse j盲rel leiate, et siin valitu siiski ei k玫lba, saate seda\n"
-"hiljem muuta. Valitud seadistust n盲idatakse monitoril.\n"
-"\n"
+"Klassikaline v玫imalus Teie arvuti heliprobleeme kindlaks teha on k盲ivitada "
+"j盲rgmised k盲sud:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" n盲itab, millist draiverit Teie\n"
+"helikaart vaikimisi kasutab\n"
"\n"
-" s眉steem p眉眉ab avada graafilist akent soovitud kuvatihedusega. Kui n盲ete\n"
-"testi ajal s玫numit ja vastate \"Jah\", suundub DrakX j盲rgmise sammu juurde.\n"
-"Kui Te s玫numit ei n盲e, t盲hendab see, et miski automaatselt tuvastatud\n"
-"seadistuses oli m盲da ja test l玫peb automaatselt 12 sekundi p盲rast, tuues\n"
-"Teid men眉眉sse tagasi. Seal saate muuta seadistusi, kuni Teil 玫nnestub\n"
-"leida see, mis tagab korrektse ja meelep盲rase graaafilise kasutajaliidese.\n"
+"- \"grep sound-slot /etc/modules.conf\" n盲itab, millist draiverit\n"
+"praegu kasutatakse\n"
"\n"
+"- \"/sbin/lsmod\" n盲itab, kas vastav moodul (draiver) on hetkel laetud\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" ja \"/sbin/chkconfig --list alsa\"\n"
+"n盲itavad, kas teenused \"sound\" ja \"alsa\" k盲ivituvad.\n"
"\n"
-"Valikud\n"
+"- \"aumix -q\" n盲itab, kas heli pole mitte summutatud (M - mute)\n"
"\n"
-" Siin saab m盲盲rata, kas soovite, et masin k盲ivitaks alglaadimise ajal\n"
-"automaatselt graafilise kasutajaliidese. Ilmselt on Teie vastus \"Ei\",\n"
-"kui soovite, et masin toimiks serverina, v玫i kui Teid ei kippunud\n"
-"seadistamise ajal edu saatma."
+"- \"/sbin/fuser -v /dev/dsp\" n盲itab, milline programm hetkel\n"
+"helikaarti kasutab.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Videokaart\n"
-"\n"
-" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt masinale\n"
-"paigaldatud videokaardi. Kui see ei 玫nnestu, saate nimekirjast valida\n"
-"kaardi, mis tegelikult on masinale paigaldatud.\n"
+"Testlehek眉lg on saadetud printerile.\n"
+"N眉眉d v玫ib minna natuke aega, enne kui printer alustab.\n"
+"Staatus:\n"
+"%s\n"
"\n"
-" Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n"
-"kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n"
-"k玫ige enam vastab."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux kasutab GMT (Greenwichi) aega ning teisendab selle\n"
-"kohalikuks ajaks vastavalt Teie valitud ajav枚枚ndile. Seda v玫ib siiski ka "
-"v盲lja\n"
-"l眉litada, kui j盲tta m盲rkimata \"Arvutikell kasutab GMT-d\". Sellisel juhul "
-"kajastab\n"
-"arvutikell sama aega, mis s眉steemi kell. See v玫ib olla kasulik, kui masinas "
-"on\n"
-"veel m玫ni operatsioonis眉steem, n盲iteks Windows.\n"
-"\n"
-"V玫imalus \"Aja automaatne s眉nkroniseerimine\" v玫imaldab kellaaega "
-"reguleerida,\n"
-"眉hendudes Internetis m玫ne ajaserveriga. Pakutavas nimekirjas valige m玫ni\n"
-"l盲hemal asuv server. M玫istagi peab selle v玫imaluse kasutamiseks olema ka\n"
-"Interneti眉hendus. Tegelikult paigaldab see Teie arvutile ajaserveri, mida "
-"saab\n"
-"kasutada isegi teiste kohtv玫rgus olevate masinate aja t盲psustamiseks."
+msgid "daily"
+msgstr "iga p盲ev"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"N眉眉d saate valida, millised teenused peaks k盲ivitama alglaadimisel.\n"
-"\n"
-"Siin on 眉les loetud k玫ik teenused, mis on saadaval antud paigalduse puhul.\n"
-"Uurige neid hoolega ja j盲tke valimata k玫ik, mida ei ole alglaadimise ajal\n"
-"tingimata vajalik k盲ivitada.\n"
-"\n"
-"Konkreetset teenust valides n盲ete selle kohta l眉hikest seletavat teksti. "
-"Kui\n"
-"Te ei ole aga kindel, kas teenus on kasulik v玫i mitte, on m玫istlik j盲tta "
-"kehtima\n"
-"vaikevalik (olgu see siis lubav v玫i mitte).\n"
-"\n"
-"!! Kui kavatsete oma s眉steemi kasutada serverina, olge eriti t盲helepanelik:\n"
-"t玫en盲oliselt ei soovi Te k盲ivitada mittevajalikke teenuseid. Pidage meeles, "
-"et\n"
-"m玫ned teenused v玫ivad serveril kasutatuna olla isegi ohtlikud. 脺ldiselt "
-"tasub\n"
-"valida ainult neid teenuseid, mida Teil t玫esti vaja l盲heb.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "ja 眉ks tundmatu printer"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Printer\": kl玫ps nupul \"Seadista\" avab printeri seadistamise\n"
-"n玫ustaja. Uurige l盲hemalt k盲ivitusjuhiste vastavast peat眉kist, kuidas\n"
-"uut printerit h盲盲lestada. Siin n盲idatav sarnaneb sellele, mida v玫isite\n"
-"n盲ha paigalduse ajal."
+msgid "Ireland"
+msgstr "Iirimaa"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "kerneli versioon"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Taastamise seadistamine "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Kas see on sobiv?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2744,12 +2470,12 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
"N眉眉d v玫ite seadistada oma Interneti-/v玫rgu眉henduse. Kui soovite, et arvuti\n"
-"oleks 眉hendatud Internetti v玫i kohtv玫rku, vajutage \"J盲rgmine\". Seej盲rel "
+"oleks 眉hendatud Internetti v玫i kohtv玫rku, vajutage \"%s\". Seej盲rel "
"k盲ivitub\n"
"v玫rguseadmete ja modemi automaattuvastus. Kui see ei 玫nnestu, j盲tke\n"
-"j盲rgmisel korral kastike \"Automaattuvastuse kasutamine\" m盲rkimata.\n"
+"j盲rgmisel korral kastike \"%s\" m盲rkimata.\n"
"Muidugi v玫ib ka v玫rgu seadistamisest loobuda v玫i seda hiljem teha.\n"
-"Sellisel juhul vajutage nupule \"Katkesta\".\n"
+"Sellisel juhul vajutage nupule \"%s\".\n"
"\n"
"V玫imalikud 眉hendusviisid on: tavaline modem, ISDN modem, ADSL 眉hendus,\n"
"kaablimodem ning l玫puks kohtv玫rk ehk LAN (Ethernet).\n"
@@ -2765,4610 +2491,4338 @@ msgstr ""
"peat眉kk, kuid v玫ib ka oodata, kuni s眉steem on paigaldatud ja kasutada siis\n"
"眉henduse seadistamiseks seal kirjeldatud rakendust."
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"S玫ltuvalt sellest, kas valisite individuaalse pakettide valiku v玫i mitte,\n"
-"n盲idatakse Teile gruppidesse ja alamgruppidesse r眉hmitatult k玫iki pakette\n"
-"sisaldavat puud. Seda m枚枚da liikudes v玫ite valida v玫i etteantud valiku\n"
-"t眉histada tervete gruppide, alamgruppide v玫i 眉ksikute pakettide kaupa.\n"
-"\n"
-"Kui valite puus m玫ne paketi, ilmub paremal selle kirjeldus, mis annab\n"
-"teada, milline on paketi 眉lesanne.\n"
-"\n"
-"!! Kui tahtlikult v玫i seet玫ttu, et asi kuulus gruppi, on valitud m玫ni "
-"serveripakett,\n"
-"palutakse Teilt kinnitust, et Te ikka t玫esti soovite neid servereid "
-"paigaldada.\n"
-"Mandrake Linuxi puhul k盲ivitatakse k玫ik paigaldatud serverid vaikimisi\n"
-"alglaadimise k盲igus. Isegi kui nad olid turvalised ja teadaolevalt "
-"probleemivabad\n"
-"ajal, mis valmis distributsioon, v玫ib kergesti juhtuda, et p盲rast Mandrake "
-"Linuxi\n"
-"praeguse versiooni valmimist leiti neist turvaauke. Kui Te ei tea, mida "
-"konkreetne\n"
-"teenus pakub v玫i miks see 眉ldse paigaldatakse, kl玫psake nupul \"Ei\", sest\n"
-"kl玫ps nupul \"Jah\" paigaldab loetletud serverid ning nad k盲ivituvad\n"
-"alglaadimise ajal automaatselt. !!\n"
-"\n"
-"Lisav玫imalus \"Automaats玫ltuvused\" lihtsalt keelab hoiatava dialoogi, mis "
-"ilmub\n"
-"alati, kui paigaldaja valib automaatselt m玫ne paketi. See juhtub siis, kui "
-"leitakse,\n"
-"et paigalduse edukaks l玫petamiseks on vajalik paigaldada veel m玫ni muu "
-"pakett.\n"
-"\n"
-"V盲ike flopiketta ikoon loendi all v玫imaldab avada eelmise paigalduse ajal "
-"valitud\n"
-"pakettide nimekirja. Sellel kl玫psamise j盲rel palutakse Teil sisestada "
-"flopiketas,\n"
-"mille l玫ite eelmise paigalduse l玫pul. Vaadake ka eelmise sammu teist "
-"n玫uannet\n"
-"selle kohta, kuidas sellist flopiketast luua."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"N眉眉d on aeg m盲盲rata rakendused, mida soovite oma s眉steemi paigaldada.\n"
-"Mandrake Linux pakub tuhandeid pakette ja m玫istagi ei eelda keegi, et Te\n"
-"neid k玫iki juba ette tunneksite.\n"
-"\n"
-"Paketid on r眉hmitatud gruppidesse vastavalt nende kasutusalale. Grupid ise "
-"on\n"
-"jagatud nelja sektsiooni:\n"
-"\n"
-" * \"T枚枚jaam\": kui kavatsete kasutada arvutit t枚枚jaamana, valige siit "
-"sektsioonist\n"
-"眉ks v玫i enam gruppidest;\n"
-"\n"
-" * \"Arendus\": kui kavatsete kasutada arvutit programmeerimiseks, valige\n"
-"soovitud grupid siit;\n"
-"\n"
-" * \"Server\": kui arvuti peab t盲itma serveri 眉lesandeid, saate siit "
-"valida,\n"
-"milliseid k玫ige enam levinud teenuseid oma masinale paigaldada;\n"
-"\n"
-" * \"Graafiline t枚枚keskkond\": l玫ppeks saate siit valida meelep盲rase "
-"graafilise\n"
-"t枚枚keskkonna. Neist tuleb valida v盲hemalt 眉ks, kui soovite kasutada "
-"graafilist t枚枚jaama!\n"
-"\n"
-"Hiire liigutamine grupi nimele toob n盲htavale selle l眉hikirjelduse. Kui "
-"olete\n"
-"tavap盲rast paigaldust tehes k玫ik grupid valimata j盲tnud (seega talitanud\n"
-"vastupidi uuenduse m玫ttele), ilmub dialoog, mis pakub mitmesuguseid\n"
-"v玫imalusi minimaalseks paigalduseks.\n"
-"\n"
-" * \"X-iga\": paigaldatakse minimaalselt graafiliseks t枚枚lauaks vajalikud "
-"paketid;\n"
-"\n"
-" * \"Baasdokumentatsiooniga\": paigaldatakse baass眉steem ning p玫hilised\n"
-"utiliidid ja nende dokumentatsioon. See peaks sobima n盲iteks serverile;\n"
-"\n"
-" * \"T玫eline miinimumpaigaldus\": paigaldatakse minimaalne hulk pakette,\n"
-"mida on vaja Linuxi t枚枚tamiseks (vaid k盲surealt). See v玫tab ruumi umbes\n"
-"65 MB.\n"
-"\n"
-"脛ra m盲rkida saab kasti \"Pakettide individuaalne valik\", mis on kasuks, "
-"kui\n"
-"tunnete pakette, mida Teile pakutakse, v玫i kui soovite totaalset kontrolli\n"
-"selle 眉le, mida Teie masinasse paigaldatakse.\n"
-"\n"
-"Kui k盲ivitasite paigalduse resiimis \"Uuendus\", v玫ite j盲tta k玫ik grupid\n"
-"valimata, mis takistab uute pakettide paigaldamist. Seda tasub tarvitada\n"
-"n盲iteks olemasoleva s眉steemi parandamisel v玫i v盲rskendamisel."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linuxi paigalduspaketid on jagatud mitme CD-ROMi vahel. DrakX\n"
-"suudab 盲ra tunda, kui valitud pakett asub muul CD-ROMil, ning v盲ljastab "
-"siis\n"
-"seesoleva CD ja palub sisestada selle, mida parajasti vaja l盲heb."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"脺lal on toodud k玫ik Teie k玫vakettal olemasolevad Linuxi partitsioonid\n"
-"Vaikimisi on need enamasti 眉sna m玫istlikud. Kui teete nendes muutusi,\n"
-"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga v盲ikeste\n"
-"partitsioonide puhul v玫ib tekkida raskusi piisava hulga tarkvara "
-"paigaldamisel.\n"
-"Kasutajate jaoks on sageli m玫istlik luua eraldi \"/home\" partitsioon.\n"
-"(Seda m玫istagi juhul, kui tegemist on enam kui 眉he Linuxi partitsiooniga).\n"
-"\n"
-"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
-"\n"
-"\"Nimi\" koosneb k玫vakettat眉眉bist, selle numbrist ja partitsiooni\n"
-"numbrist (n盲iteks \"hda1\").\n"
-"\n"
-"K玫vaketta t眉眉p on \"hd\", kui on tegemist IDE kettaga, ning \"sd\", kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"K玫vaketta number on alati t盲ht \"hd\" v玫i \"sd\" j盲rel. IDE ketastel:\n"
-"\n"
-" * \"a\" - esmase IDE kontrolleri 眉lem,\n"
-"\n"
-" * \"b\" - esmase IDE kontrolleri allutatu,\n"
-"\n"
-" * \"c\" - teisese IDE kontrolleri 眉lem,\n"
-"\n"
-" * \"d\" - teisese IDE kontrolleri allutatu.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux on paljude kasutajatega s眉steem, mis t盲hendab, et igal kasutajal\n"
-"v玫ivad olla oma eelistused, failid jne. Selle kontseptsiooni kohta leiab "
-"l盲hemat\n"
-"infot \"Kasutaja k盲siraamatust\". Kuid erinevalt administraatorist ei ole\n"
-"kasutajal 玫igust muuta midagi muud kui vaid oma faile ja enda seadistusi.\n"
-"Te peaksite looma ka endale v盲hemalt 眉he tavakasutaja konto, millele sisse\n"
-"logida igap盲evategevuseks. Kuigi v玫ib olla v盲gagi praktiline logida iga "
-"p盲ev\n"
-"sisse administraatorina, v玫ib see olla ka v盲ga ohtlik! V盲himgi viga v玫ib sel"
-"\\ puhul t盲hendada, et s眉steem lakkab t枚枚tamast. Kui teete t玫sise vea "
-"tavakasutajana,\n"
-"v玫ite kaotada ainult m玫ningat infot, kuid s眉steem j盲盲b t枚枚korda.\n"
-"\n"
-"K玫igepealt tuleks sisestada oma tegelik nimi. See ei ole m玫istagi "
-"kohustuslik - tegelikult v玫ite sisestada, mida soovite. DrakX v玫tab esimese "
-"sisestatud s玫na\n"
-"ning m盲盲rab selle \"kasutajanimeks\". See on siis nimi, mille all konkreetne "
-"kasutaja\n"
-"saab ennast s眉steemi sisse logida. Seda saab ka hiljem muuta. Seej盲rel "
-"tuleb\n"
-"sisestada parool. Privileegideta (tavalise) kasutaja parool ei ole "
-"turvalisuse m玫ttes\n"
-"nii oluline kui administraatori oma, kuid pole p玫hjust sellest ka "
-"naljanumbrit teha:\n"
-"l玫ppeks on ju m盲ngus Teie failid.\n"
-"\n"
-"Kui kl玫psate nupule \"Kasutaja 玫ige\", v玫ite lisada veel nii palju "
-"kasutajaid, kui vaja.\n"
-"Lisage 眉ks kasutaja iga inimese kohta, kes Teie arvutit kasutab. Kui olete "
-"k玫ik\n"
-"soovitud sisestanud, vajutage nupule \"J盲rgmine ->\".\n"
-"\n"
-"Kl玫ps nupule \"T盲psemalt\" v玫imaldab muuta kasutajale m盲盲ratavat vaike-"
-"\"shelli\"\n"
-"(vaikimisi on see bash).\n"
-"\n"
-"Kui olete kasutajate lisamise l玫petanud, pakutakse Teile valida kasutaja, "
-"kel on\n"
-"玫igus logida s眉steemi automaatselt, kui arvuti algk盲ivituse teeb. Kui see "
-"v玫imalus\n"
-"Teile huvi pakub (ja kohalik turvalisus muret ei valmista), valige "
-"meelep盲rane\n"
-"kasutaja ning aknahaldur ja vajutage \"J盲rgmine ->\". Kui Te sellest aga "
-"huvitatud ei ole,\n"
-"eemaldage m盲rge kastist \"Kas soovite seda v玫imalust kasutada?\"."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Enne j盲tkamist lugege hoolikalt l盲bi litsentsileping. See kehtib kogu "
-"Mandrake\n"
-"Linuxi distributsiooni kohta. Kui Te k玫igi selle tingimustega n玫us olete,\n"
-"m盲rkige 盲ra kast \"N玫us\". Kui Teile aga miski ei meeldi, siis l眉litage\n"
-"lihtsalt arvuti v盲lja."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Vormindada tuleb ka %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ligip盲盲s Teie kernelile vastavatele kerneli moodulitele eba玫nnestus (puudub "
-"fail %s), mis enamasti t盲hendab, et Teie alglaadimisflopi ei ole s眉nkroonis "
-"paigaldus-andmekandjaga (palun looge uus alglaadimisflopi)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tekkis viga: failis眉steemi loomiseks ei leitud 眉htki seadet. Palun "
-"kontrollige oma riistvara."
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Viga faili %s lugemisel"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Selle paketivaliku kasutamiseks alustage paigaldamist k盲suga \"linux "
-"defcfg=floppy\""
+msgid "Wizard Configuration"
+msgstr "N玫ustaja s盲tted"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "See flopi ei ole FAT-vormingus"
+msgid "Autoprobe"
+msgstr "Proovida niisama"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Pange FAT-vormingus flopi seadmesse %s"
+msgid "Backup system files..."
+msgstr "S眉steemsete failide varundamine..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "脺ldlevi kasutamine on ilma NIS domeenita v玫imatu"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"S眉steemi uuendamiseks tuleb eemaldada j盲rgmised paketid: %s\n"
-"\n"
-"\n"
-"Kas t玫esti eemaldada need paketid?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Ei"
+msgid "Removing printer \"%s\"..."
+msgstr "Printeri \"%s\" eemaldamine..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Jah"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Olete valinud j盲rgmise(d) serveri(d): %s\n"
-"\n"
-"\n"
-"Need serverid aktiveeritakse vaikimisi. Pole k眉ll teada, et neil oleks\n"
-"turvaprobleeme, aga nende leidmine tulevikus pole sugugi v盲listatud.\n"
-"Kui peaks nii minema, kontrollige, et suudate uuenduse v玫imalikult\n"
-"ruttu hankida.\n"
+"Andke palun faili auto_install.cfg asukoht.\n"
"\n"
+"J盲tke t眉hjaks, kui Te ei soovi m盲盲rata automaatpaigalduse resiimi.\n"
"\n"
-"Kas t玫esti paigaldada need serverid?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "S眉steemi s盲tted"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "S眉steemi paigaldus"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "V玫rgu seiskamine"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Infotase, mida v玫ib saada cpuid instruktsiooni vahendusel"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "V玫rgu k盲imapanek"
+msgid "Peru"
+msgstr "Peruu"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ketta jagamine eba玫nnestus: %s"
+msgid " on device: %s"
+msgstr " seadmel: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX kettajagamise n玫ustaja leidis sellised lahendused:"
+msgid "Remove Windows(TM)"
+msgstr "Eemalda Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Paigalduseks ei ole 眉ldse ruumi"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "K盲ivitab X fondiserveri, ilma milleta X lihtsalt ei l盲he k盲ima."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"N眉眉d saate partitsioneerida %s k玫vaketta\n"
-"Kui olete valmis, salvestage k盲suga 'w'"
+"Enamik v盲盲rtusi on v玫etud Teie t枚枚tavast\n"
+"s眉steemist. V玫ite neid vajadusel muuta."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Kasuta fdisk-i"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Valige fondifail v玫i kataloog ja kl玫psake 'Lisa'"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Partitsioneerin ise"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Kettal %s h盲vivad K脮IK partitsioonid ja andmed"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teil on rohkem kui 眉ks k玫vaketas, millisele neist paigaldate Linuxi?"
+msgid "Cron not available yet as non-root"
+msgstr "Cron ei ole veel saadaval mitteadministraatorile"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "T眉hjenda kogu ketas"
+msgid "System"
+msgstr "S眉steem"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Eemalda Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Kas soovite kasutada seda omadust?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Sobivat FAT-partitsiooni ei leitud (ei ole piisavalt ruumi)"
+msgid "Arabic"
+msgstr "Araabia"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Andmepidevuse tagamiseks p盲rast partitsiooni(de) suuruse muutmist \n"
-"kontrollitakse j盲rgmisel Windows(TM) alglaadimisel failis眉steemi"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FATi suuruse muutmine eba玫nnestus: %s"
+"\n"
+"- valikud:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Arvutan Windowsi failis眉steemi piire"
+msgid "Password required"
+msgstr "Parooli n玫udmine"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Muudan suurust"
+msgid "%d minutes"
+msgstr "%d minutit"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "partition %s"
-msgstr "partitsioon %s"
+msgid "Graphics card: %s"
+msgstr "Graafikakaart: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Kui palju ruumi j盲tate Windowsi jaoks?"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAVi 眉lekanne eba玫nnestus!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HOIATUS!\n"
-"\n"
-"DrakX hakkab Teie Windowsi partitsiooni suurust muutma.\n"
-"Olge ettevaatlik: see operatsioon v玫ib olla ohtlik Teie failidele.\n"
-"Palun kasutage enne scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
-"Kui olete oma otsuses kindel, vajutage \"Olgu\"."
+msgid "XFree configuration"
+msgstr "XFree s盲tted"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Teie Windowsi partitsioon on fragmenteerunud. Palun tehke arvutile uus "
-"alglaadimine, k盲ivitage Windows ja seej盲rel utiliit 'defrag' ning tulge siis "
-"Mandrake Linuxi paigalduse juurde tagasi."
+msgid "Choose action"
+msgstr "Valige tegevus"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Vaba ruumi arvutamine Windowsi partitsioonil"
+msgid "French Polynesia"
+msgstr "Prantsuse Pol眉neesia"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"FAT-partitsiooni suurust ei 玫nnestunud muuta, \n"
-"ilmnes selline viga: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Millist partitsiooni soovite muuta?"
+"Tavaliselt tuvastab DrakX h玫lpsasti, mitme nupuga hiirt Te kasutate. Kui\n"
+"see v盲lja ei tule, eeldatakse, et Teil on kahe nupuga hiir, ning "
+"kasutatakse\n"
+"kolmanda nupu emuleerimist. Kahenupulisel hiirel saab kolmandat nuppu\n"
+"\"vajutada\" 眉heaegselt vasakut ja paremat nuppu vajutades. DrakX tuvastab\n"
+"automaatselt, kas tegemist on PS/2, jadapordi v玫i USB-hiirega.\n"
+"\n"
+"Kui soovite muuta hiiret眉眉pi, valige pakutud nimekirjast sobiv t眉眉p.\n"
+"\n"
+"Kui valite m玫ne muu hiiret眉眉bi kui vaikimisi m盲盲ratu, palutakse Teil seda\n"
+"testida. Kasutage nuppe ja ratast kontrollimaks, et valik oli 玫ige. Kui\n"
+"hiir ei k盲itu korralikult, vajutage t眉hikuklahvi v玫i klahvi [Return], mis "
+"viib\n"
+"Teid tagasi dialoogi ja lubab sooritada uue valiku.\n"
+"\n"
+"Vahel ei 玫nnestu rattaga hiirt automaatselt tuvastada. Siis tuleb see "
+"loendist\n"
+"k盲sitsi valida. Kontrollige, et valite 玫igesse porti 眉hendatud hiiret眉眉bi. "
+"Kui\n"
+"vajutate nupule \"%s\", n盲idatakse hiire kujutist. Siis tuleb Teil "
+"liigutada\n"
+"hiireratast, et see korrektselt aktiveerida. Seej盲rel testige, kas k玫ik "
+"nupud\n"
+"ja liigutused toimivad korralikult."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Kasuta vaba ruumi Windowsi partitsioonil"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Toetab OKI 4w ja sellega 眉hilduvaid winprintereid."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Sobivat FAT-partitsiooni loopback-ina kasutamiseks ei leitud (ei ole "
-"piisavalt ruumi)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Helis眉steemi ALSA (Advanced Linux Sound Architecture) k盲ivitamine"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Saaleala suurus (MB): "
+msgid "Installing driver for %s card %s"
+msgstr "Paigaldame juhtprogrammi %s kaardile %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Juurpartitsiooni suurus (MB): "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Kandsite 眉le oma senise vaikeprinteri (\"%s\"). Kas see peaks olema "
+"vaikeprinter ka uue tr眉kkimiss眉steemi %s puhul?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Valige suurused"
+msgid "Enable Server"
+msgstr "Serveri lubamine"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Millisele partitsioonile soovite paigaldada Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukraina"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Kasuta Windowsi partitsiooni loopbackina"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"V玫rgu眉hendus ei t枚枚tanud ja seda ei saa ka k盲ivitada. Kontrollige palun oma "
+"seadistusi ja riistvara. Seej盲rel proovige uuesti seadistada v玫rguprinterit."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Kasutatavat partitsiooni ei leitud"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Pange palun alglaadimisflopi seadmesse %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Kasuta olemasolevat partitsiooni"
+msgid "Local network(s)"
+msgstr "Kohalik v玫rk"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
+msgid "Remove Windows"
+msgstr "Eemalda Windows"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Kasuta vaba ruumi"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Teie %s sk盲nner on seadistatud.\n"
+"N眉眉d v玫ite skaneerida dokumente, kasutades selleks rakendust \"XSane\", "
+"mille leiate rakenduste men眉眉s rubriigist Multimeedia/Graafika."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Teil peab olema FAT-partitsioon haagitud asukohas /boot/efi"
+msgid "Firewire controllers"
+msgstr "Firewire kontrollerid"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Saaleala ei ole m盲盲ratud.\n"
+"Kui olete m盲盲ranud alglaaduri 眉ldised parameetrid, n盲idatakse loendit\n"
+"alglaadimise ajal kasutatavatest valikutest.\n"
"\n"
-"Kas ikkagi j盲tkata?"
+"Kui masinale on paigaldatud veel m玫ni operatsioonis眉steem, lisatakse see\n"
+"automaatselt alglaaduri men眉眉sse. Siin saate olemasolevaid valikuid oma\n"
+"maitse j盲rgi h盲盲lestada: kl玫psates nupul \"%s\" saate uue kirje lisada,\n"
+" \"%s\" v玫i \"%s\" v玫imaldab kirjet muuta v玫i eemaldada.\n"
+"\"%s\" viib Teid paigalduse j盲rgmise sammu juurde.\n"
+"\n"
+"Teil v玫ib muidugi olla ka soov mitte anda kellelegi ligip盲盲su teistele\n"
+"operatsioonis眉steemidele, millisel juhul v玫ite vastavad kirjed kustutada.\n"
+"Aga siis l盲heb Teil kindlasti vaja alglaadimisketast, et ka ise neile ligi "
+"p盲盲seda!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Teil peab olema juurpartitsioon.\n"
-"Selleks looge uus partitsioon (v玫i valige 眉ks olemasolevatest).\n"
-"Siis valige tegevus \"Haakepunkt\" ja m盲盲rake see kui '/'"
+msgid "System mode"
+msgstr "T枚枚mood"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Osa Teie riistvarast n玫uab tarnijapoolseid draivereid.\n"
-"Infot nende kohta saate: %s"
+"Et kasutada NetWare printerit, peate sisestama NetWare printserveri nime "
+"(NB! See v玫ib olla erinev tema TCP/IP nimest!), samuti tr眉kij盲rjekorra nime "
+"serveril ning kasutajatunnuse ja salas玫na."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"脮nnitlen, paigaldamine on edukalt l玫petatud.\n"
-"V玫tke palun v盲lja flopi ja/v玫i CD ja vajutage Enter alglaadimiseks.\n"
-"\n"
-"\n"
-"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
-"Mandrake Linuxi kodulehek眉ljelt:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Abi s眉steemi edasiseks seadistamiseks saab eelk玫ige dokumendist\n"
-"\"Official Mandrake Linux User's Guide\"."
+msgid "Netmask:"
+msgstr "V玫rgumask:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Lisand"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"V盲rskenda printeriloendit (n盲itamaks k玫iki saadaolevaid CUPS printserveri "
+"printereid)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Kui see on sisse l眉litatud, konrollitakse CUPSi igal k盲ivitamisel "
+"automaatselt, et\n"
"\n"
-"Hoiatus\n"
-"\n"
-"Palun lugege hoolega j盲rgnevat teksti. Kui Te ei ole n玫us k玫igi "
-"allj盲rgnevate\n"
-"v盲idetega, on paigaldamine j盲rgmise CD pealt keelatud. Vajutage 'Keeldun',\n"
-"et j盲tkata paigaldamist ilma selle CD-ta.\n"
-"\n"
+"- kui LPD/LPRng on paigaldatud, ei kirjutaks CUPS 眉le faili /etc/printcap\n"
"\n"
-"M玫ned komponendid j盲rgmisel CD-l ei ole kaitstud 脺ldise Avaliku Litsentsi\n"
-"v玫i muude sarnaste litsentsidega, vaid kasutavad omaenda erilisi\n"
-"litsentsivorme. Seep盲rast lugege sellised litsentsid hoolega l盲bi ja\n"
-"tutvuge nende tingimustega, enne kui hakata neid komponente kasutama\n"
-"v玫i levitama.\n"
-"脺ldiselt kipuvad sellised litsentsid keelama komponendi kopeerimise,\n"
-"duplitseerimise (v盲lja arvatud varundamise sihil), edastamise, muutmise\n"
-"v玫i edasiarendamise.\n"
-"Litsentsilepingu tingimuste rikkumine l玫petab otsekohe k玫ik Teie 玫igused,\n"
-"mis kaasnesid litsentsiga n玫ustumisel. Kui m玫ni konkreetne litsentsi\n"
-"punkt Teile selliseid 玫igusi ei anna, ei v玫i Te enamasti paigaldada "
-"rakendust\n"
-"enam kui 眉hte s眉steemi ega muuta seda v玫rgut枚枚 huvides. Kui Te ei ole\n"
-"tingimustes kindel, v玫tke 眉hendust komponendi levitaja v玫i arendajaga.\n"
-"脺ldjuhul on selliste komponentide, sealhulgas dokumentatsiooni, edastamine\n"
-"kolmandale poolele v玫i kopeerimine keelatud.\n"
+"- kui /etc/cups/cupsd.conf puudub, see loodaks\n"
"\n"
+"- kui printeriinfo l盲heb 眉ldlevisse, ei ole seal serveri nimeks \"localhost"
+"\".\n"
"\n"
-"K玫igi j盲rgmisel CD-l paiknevate komponentide 玫igused kuuluvad vastavalt\n"
-"nende autorile ning on kaitstud tarkvara puhul kehtivate intellektuaalse\n"
-"omandi ja autori玫iguse seadustega.\n"
+"Kui m玫ni neist sammudest tekitab probleeme, l眉litage v玫imalus v盲lja, aga "
+"siis peate nende eest ise hoolt kandma."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"J盲rgnev l玫ppkasutaja litsents on eksimuste v盲ltimiseks originaalkeeles!\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) oli esimene heli-API. See on op-s眉steemist s玫ltumatu "
+"heli-API (saadaval enamiku unix-s眉steemide tarbeks), kuid samas v盲ga "
+"elementaarne ja piiratud.\n"
+"Ja pealegi kipuvad OSS-draiverid kogu aeg jalgratast uuesti leiutama.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) kujutab endast moodulistatud\n"
+"arhitektuuri, mis toetab p盲ris suurt hulka ISA-, USB- ja PCI-kaarte.\n"
"\n"
-"5. Governing Laws \n"
+"See pakub ka palju arenenumat API-t kui OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "J盲rgmine samm: '%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Abi"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "seadistamata"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Seadista"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Ikkagi edasi?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Pakettide paigaldamisel tekkis viga:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Pakettide tellimisel tekkis viga:"
+"Alsa kasutamiseks v玫ib tarvitada:\n"
+" -vana 眉hilduvat OSS API-t\n"
+"- uut ALSA API-t, mis pakub hulga t盲iustatud v玫imalusi, kuid\n"
+"n玫uab ALSA teegi kasutamist.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"Vahetage CD-ROM!\n"
+"Automaatne paigaldus v玫ib olla ka sedav玫rd tegija,\n"
+"et kasutab 盲ra kogu k玫vaketta !!\n"
"\n"
-"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <Olgu>.\n"
-"Kui teil s盲herdust ei ole, vajutage <Katkesta>."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Keeldun"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "N玫us"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Paketi %s paigaldamine"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d paketti"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "脺ksikasjadeta"
+"V玫ite valida ka lihtsalt paigalduse kordamise.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "脺ksikasjad"
+msgid "Network printer \"%s\", port %s"
+msgstr "V玫rguprinter \"%s\", port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Palun oodake, valmistun paigalduseks..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Palun valige, millist v玫rguliidest soovite kasutada kohtv玫rgu jaoks."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Aega j盲盲nud "
+msgid "OK to restore the other files."
+msgstr "Muude failide taastamiseks vajuta 'Olgu'."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Oletan"
+msgid "Please choose your keyboard layout."
+msgstr "Palun valige klaviatuuriasetus."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Paigaldan"
+msgid "Printer Device URI"
+msgstr "Printeri seadme URI"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Valige paketid, mida soovite paigaldada"
+msgid "Not erasable media!"
+msgstr "Seda andmekandjat ei saa puhastada!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimaalne paigaldus"
+msgid "Terminal-based"
+msgstr "Terminalip玫hine"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Paketivaliku uuendamine"
+msgid "Installing a printing system in the %s security level"
+msgstr "Tr眉kkimiss眉steemi paigaldamine turvatasemel '%s'"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Laadi flopilt/Salvesta flopile"
+msgid "The user name is too long"
+msgstr "See kasutajanimi on liiga pikk"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Eelmine"
+msgid "Other OS (windows...)"
+msgstr "Muu OS (windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Paigaldamine"
+msgid "WebDAV remote site already in sync!"
+msgstr "WebDAVi kaugsait on juba s眉nkroonis!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "N盲ita automaatselt valitud pakette"
+msgid "Reading printer database..."
+msgstr "Printeri andmebaasi lugemine..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"
+msgid "Generate auto install floppy"
+msgstr "Loo kiirpaigaldusflopi"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Selle paketi peaks uuendama.\n"
-"Olete kindel, et Te ei vali seda?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "See pakett on juba paigaldatud"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "See pakett on kohustuslik"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Seda paketti ei saa valida/valimata j盲tta"
+"\t\t kasutajatunnus: %s\n"
+"\t\t asukohas: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Eemaldamiseks on valitud j盲rgmised paketid"
+msgid "Somalia"
+msgstr "Somaalia"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Paigaldamiseks on valitud j盲rgmised paketid"
+msgid "No open source driver"
+msgstr "Vabavara-juhtprogramm puudub"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Seda paketti ei saa valida, sest paigalduseks napib kettaruumi"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"S眉steem on t盲ielikult suletud. V玫rgust kasutamine on v玫imalik ainult\n"
+"spetsiaalselt loodud juurdep盲盲suteid kasutades."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "T盲htsus: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Suurus: %d KB\n"
+msgid "New Caledonia"
+msgstr "Uus-Kaledoonia"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versioon: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Euroopa protokoll (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
+msgid "Video mode"
+msgstr "Graafikamood"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Vigane pakett"
+msgid "Please enter your email address below "
+msgstr "Sisestage palun siia oma e-posti aadress"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Muu"
+msgid "Oman"
+msgstr "Omaan"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Suurus kokku: %d / %d MB"
+msgid "Network Monitoring"
+msgstr "V玫rgu j盲lgimine"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "J盲rgmine ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Valik paketthaaval"
+msgid "New size in MB: "
+msgstr "Uus suurus (MB): "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Paketigruppide valik"
+msgid "Partition table type: %s\n"
+msgstr "Partitsioonitabeli t眉眉p: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Teie s眉steemil napib ressurse ja paigaldamine v玫ib eba玫nnestuda.\n"
-"Kui nii juhtub, proovige palun tekstip玫hist paigaldust. Selleks\n"
-"vajutage CDROMilt laadimisel F1 ja sisestage 'text'"
+msgid "Authentication Windows Domain"
+msgstr "Windowsi domeeni autentimine"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Salvesta paketivalik"
+msgid "US keyboard"
+msgstr "USA"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automaatne"
+msgid "Buttons emulation"
+msgstr "Nuppude emuleerimine"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Kordamine"
+msgid ", network printer \"%s\", port %s"
+msgstr ", v玫rguprinter \"%s\", port %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"Automaatne paigaldus v玫ib olla ka sedav玫rd tegija,\n"
-"et kasutab 盲ra kogu k玫vaketta !!\n"
"\n"
-"V玫ite valida ka lihtsalt paigalduse kordamise.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Loo kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Taask盲ivitus"
+"Drakbackupi tegevus lindi vahendusel:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"M玫ned sammud ei ole l玫pule viidud.\n"
"\n"
-"Kas soovite t玫esti praegu l玫petada ja v盲ljuda?"
+" FTP 眉henduse probleem: FTP kaudu pole v玫imalik saata Teie varukoopiafaile.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Kiirpaigaldusflopi loomine..."
+msgid "Sending Speed:"
+msgstr "Saatmise kiirus:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Pange palun t眉hi flopi seadmesse %s"
+msgid "Halt bug"
+msgstr "Seiskamisviga"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Alglaaduri v玫imaldamiseks tuleb Teil muuta oma Open Firmware\n"
-" alglaadimisseadet. Hoidke taask盲ivituse ajal all klahve\n"
-" Command-Option-O-F ja kirjutage:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Seej盲rel kirjutage: shut-down\n"
-"J盲rgmisel k盲ivitusel peaksite n盲gema alglaaduri k盲surida."
+msgid "Mail alert configuration"
+msgstr "Meilihoiatuse s盲tted"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Alglaaduri paigaldamine eba玫nnestus. Tekkis j盲rgmine viga:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Alglaaduri paigaldamine"
+msgid "Bosnian"
+msgstr "Bosnia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Viga aboot-i paigaldamisel, \n"
-"kas sundida peale, riskides esimese partitsiooni h盲vinguga?"
+msgid "Release: "
+msgstr "V盲ljalase: "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Kas soovite kasutada aboot-i?"
+msgid "Connection speed"
+msgstr "脺henduse kiirus"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Paistab, et Teil on OldWorld-i v玫i hoopis tundmatu\n"
-" masin, igatahes alglaadur yaboot siin ei t枚枚ta.\n"
-"Paigaldus k眉ll j盲tkub, aga masina k盲ivitamiseks\n"
-" tuleb Teil kasutada BootX-i v玫i mingit muud nippi"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Alglaaduri ettevalmistamine..."
+"Sisestage palun oma CD-kirjutaja seadmenimi\n"
+" nt: 0,1,0"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Domeeni administraatori parool"
+msgid "Namibia"
+msgstr "Namiibia"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Domeeni administraatori kasutajatunnus"
+msgid "Database Server"
+msgstr "Andmebaasi server"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windowsi domeen"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "ketta eriomadused (nt. kirjutamine ja/v玫i DVD tugi)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Windowsi domeeni autentimine"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Et see t枚枚taks W2K primaarse domeenikontrolleri (PDC) puhul, on Teil vaja "
-"administraatori privileege, et k盲ivitada serveril k盲sk \"C:\\>net "
-"localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\" ja teha "
-"sellele alglaadimine.\n"
-"Samuti on Teil vaja domeeni administraatori kasutajanime/parooli, et "
-"眉hendada see masin Windows(TM) domeeniga.\n"
-"Kui v玫rgu眉hendus ei ole veel seadistatud, 眉ritab DrakX domeeni 眉henduda "
-"p盲rast v玫rgu seadistamist.\n"
-"Kui midagi peaks eba玫nnestuma ja domeeni autentimine ei t枚枚ta, k盲ivitage "
-"p盲rast alglaadimist k盲surealt 'smbpasswd -j DOMEEN -U KASUTAJA%%PAROOL', kus "
-"DOMEEN on Teie Windows(TM) domeen ja KASUTAJA%%PAROOL on domeeni "
-"administraator parooliga.\n"
-"K盲sk 'wbinfo -t' v玫imaldab kontrollida, kas domeeni autentimisfraasid on "
-"玫iged."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS domeen"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "NIS autentimine"
+"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
+"SEE ON AGA EKSPERIMENTAALNE JA V脮IB OLLA EBASTABIILNE.\n"
+"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Palun oodake, s盲tin turvaparameetrid..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP server"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Tundmatu|CPH05X (bt878) [paljud tootjad]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAPi alus dn"
+msgid "Launch the graphical environment when your system starts"
+msgstr "K盲ivita X Windows alglaadimisel"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP autentimine"
+msgid "hourly"
+msgstr "iga tund"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr " edukalt taastatud %s -l "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Kohalikud failid"
+msgid "Making printer port available for CUPS..."
+msgstr "Printer tehakse CUPS-ile k盲ttesaadavaks"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Autentimisviis"
+msgid "Antigua and Barbuda"
+msgstr "Antigua ja Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Salas玫na on liiga l眉hike (peaks olema v盲hemalt %d t盲hem盲rki)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! N盲itab, et parool antud s眉steemis erineb sellest, mida teab\n"
+"terminalserver.\n"
+"Palun kustutage ja looge see kasutaja terminalserveris uuesti, et "
+"v玫imaldada\n"
+"sisselogimist."
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password"
-msgstr "Salas玫na puudub"
+msgid "Spanish"
+msgstr "Hispaania"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Juurkasutaja salas玫na"
+msgid "Start"
+msgstr "K盲ivita"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Te ei ole seadistanud X-i. Kas Te t玫esti ei taha seda teha?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Aktiveerib/keelab v玫rgukaardi mitte-eelisoleku kontrolli."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Teenused: %d aktiveeritud, kokku %d"
+msgid "Configuring applications..."
+msgstr "Rakenduste seadistamine..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Services"
-msgstr "Teenused"
+msgid "Normal modem connection"
+msgstr "Tavaline modemi眉hendus"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "System"
-msgstr "S眉steem"
+msgid "File Selection"
+msgstr "Failivalik"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "%s on %s"
-msgstr "%s asukohas %s"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Millist ISDN seadistust eelistate?\n"
+"\n"
+"* Vana seadistus kasutab isdn4net-i. Sellel on v玫imsaid\n"
+" vahendeid, kuid seadistamine on keerukas ja mittestandardne.\n"
+"\n"
+"* Uus seadistus on h玫lpsamini m玫istetav, vastab paremini\n"
+" standarditele, kuid pakub v盲hem t枚枚riistu.\n"
+"\n"
+"Meie soovitus on kasutada light-seadistust.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Alglaadur"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Boot"
-msgstr "Alglaadimine"
+msgid "Run config tool"
+msgstr "Seadistamisvahendi k盲vitamine"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "disabled"
-msgstr "keelatud"
+msgid "Bootloader installation"
+msgstr "Alglaaduri paigaldus"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "activated"
-msgstr "aktiveeritud"
+msgid "Root partition size in MB: "
+msgstr "Juurpartitsiooni suurus (MB): "
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Tulem眉眉r"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "See pakett on kohustuslik"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security"
-msgstr "Turvalisus"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO-laadefail on %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Security Level"
-msgstr "Turvatase"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS hierarhiat, "
+"t玫lkimaks nimesid IP-aadressideks."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network"
-msgstr "V玫rk"
+msgid "Disconnect..."
+msgstr "Lahuta..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "Kohtv玫rk ja Internet"
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Graphical interface"
-msgstr "Graafiline kasutajaliides"
+msgid "Report"
+msgstr "Raport"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Riistvara"
+msgid "Palau"
+msgstr "Belau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "TV kaart"
+msgid "level"
+msgstr "tase"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Helikaarti ei leitud. Proovige see leida p盲rast paigaldust \"harddrake\" abil"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Helikaardi seadistamiseks k盲ivitage p盲rast paigaldust \"sndconfig\""
+"Iga teadet j盲lgib ja lahendab konkreetne ja kvalifitseeritud MandrakeSofti "
+"tehniline t枚枚taja."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Kas Teil on ISA helikaart?"
+msgid "Package Group Selection"
+msgstr "Paketigruppide valik"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Helikaart"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Taasta v玫rguprotokolli abil: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "CUPS printserver"
+msgid "You can configure each parameter of the module here."
+msgstr "Siin saab seadistada mooduli k玫iki parameetreid."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Printer puudub"
+msgid "Choose the resolution and the color depth"
+msgstr "Valige kuvatihedus ja v盲rvis眉gavus"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Printer"
+msgid "Emulate third button?"
+msgstr "Kas emuleerida keskmist hiirenuppu?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Hiir"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Uut partitsiooni ei saa luua\n"
+"(sest primaarseid partitsioone on juba maksimaalselt).\n"
+"Eemaldage k玫igepealt m玫ni primaarne partitsioon ja \n"
+"tekitage laiendatud partitsioon."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Ajav枚枚nd"
+msgid "Mount"
+msgstr "Haagi"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Klaviatuur"
+msgid "Creating auto install floppy"
+msgstr "Automaatpaigaldusflopi loomine"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "Kokkuv玫te"
+msgid "Install updates"
+msgstr "Uuenduste paigaldus"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP server"
+msgid "text box height"
+msgstr "tekstikasti k玫rgus"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Aja automaatne s眉nkroniseerimine (NTP abil)"
+msgid "State"
+msgstr "Olek"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Arvuti sisekell on seatud GMT ajale"
+msgid "Be sure a media is present for the device %s"
+msgstr "Kontrollige, et andmekandja on seadmes %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Millises ajav枚枚tmes asute?"
+msgid "Enable multiple profiles"
+msgstr "V玫imalda mitu profiili"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Kas soovite uuesti proovida?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Need valikud v玫ivad varundada ja taastada k玫ik failid kataloogis /etc.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "脺hendust peegliga %s ei saadud"
+msgid "Local printer"
+msgstr "Kohalik printer"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Proovin lugeda peeglilt pakettide nimekirja..."
+msgid "Files Restored..."
+msgstr "Taastatud failid..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valige peegel, millelt lugeda pakettide nimekiri"
+msgid "Package selection"
+msgstr "Pakettide valik"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Proovin hankida Mandrake Linuxi veebisaidilt saadaolevate peeglite "
-"nimekirja..."
+msgid "Mauritania"
+msgstr "Mauritaania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Teil on n眉眉d v玫imalus alla laadida uuendatud pakette. Need on v盲lja lastud\n"
-"p盲rast Mandrake Linuxi distributsiooni ilmumist ja v玫ivad sisaldada vigade\n"
-"parandusi v玫i turvauuendusi.\n"
+"Teie praegused s盲tted on v玫imalik s盲ilitada ja eeldada, et DHCP server on "
+"juba seadistatud. Sellisel juhul kontrollige, et v玫rk, mida kasutate "
+"kohtv玫rgu tarbeks, on 玫igesti tuvastatud. Seda ei hakata 眉mber seadistama "
+"ega Teie DHCP serveri s盲tteid muutma.\n"
"\n"
-"Allalaadimiseks peab Teil olema t枚枚tav interneti眉hendus.\n"
+"Vaikimisi DNS kirje on tulem眉眉ri poolt seadistatud puhverdav nimeserver. See "
+"on v玫imalik asendada n盲iteks Teie ISP DNSi IP-ga.\n"
+"\t\t \n"
+"Vastasel juhul seadistan Teie liidese 眉mber ja seadistan (眉mber) ka DHCP "
+"serveri.\n"
"\n"
-"Kas soovite uuendusi paigaldada?"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Pange palun moodulite uuendamise flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Pange palun alglaadimisflopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "Paigaldusj盲rgsed s盲tted"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-"Paketi %s paigaldamine\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Valmistun paigalduseks"
+"Kohalikku printerit ei leitud! Printeri paigaldamiseks k盲sitsi m盲rkige "
+"sisendireale seadmenimi/failinimi (paralleelpordid: /dev/lp0, /dev/lp1..., "
+"mille vasteks teistes s眉steemides on LPT1, LPT2...; esimene USB printer: /"
+"dev/usb/lp0, teine USB printer: /dev/usb/lp1...)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD pealdisega \"%s\""
+msgid "All primary partitions are used"
+msgstr "K玫ik primaarsed partitsioonid on kasutusel"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Kui Teil on olemas k玫ik alltoodud CD-d, kl玫psake <Olgu>.\n"
-"Kui Teil ei ole 眉htki neist, kl玫psake <Katkesta>.\n"
-"Kui puuduvad m玫ned CD-d, m盲rkige vaid olemasolevad ja siis <Olgu>."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "K玫ik"
+"Soovitame taask盲ivitada ka X keskkonna, et v盲ltida v玫imalikke\n"
+"masinanime muutmisest tingitud probleeme."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "T玫eliselt minimaalne (eriti just ilma urpmi-ta)"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Riistvara automaatne tuvastamine ja seadistamine alglaadimisel."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Baasdokumentatsiooniga (soovitatav!)"
+msgid "Installation Server Configuration"
+msgstr "Paigaldusserveri seadistamine"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "With X"
-msgstr "X-iga"
+msgid "Configuring IDE"
+msgstr "IDE seadistamine"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Te ei valinud 眉htegi paketigruppi.\n"
-"Palun valige meelep盲rane minimaalne paigaldus:"
+msgid "Network functionality not configured"
+msgstr "V玫rguvalmidus on seadistamata"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Type of install"
-msgstr "Paigalduse t眉眉p"
+msgid "Configure module"
+msgstr "Mooduli seadistamine"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Valiku suurus 眉letab saadaolevat kettaruumi"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kookosesaared"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Sisestage palun paketivalikut sisaldav flopi"
+msgid "Disconnecting from the Internet "
+msgstr "Interneti眉henduse katkestamine"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Laadimine flopilt"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Muudatuste rakendamiseks vajate alglaadimist"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Package selection"
-msgstr "Pakettide valik"
+msgid "Provider phone number"
+msgstr "Sissehelistamiskeskuse number"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Salvesta flopile"
+msgid "Host %s"
+msgstr "Masin %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Laadi flopilt"
+msgid "Armenia"
+msgstr "Armeenia"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Valige palun paketivaliku laadimine v玫i salvestamine flopil(t).\n"
-"Vorming on sama, mis automaatpaigaldusega loodud flopide puhul."
+msgid "Fiji"
+msgstr "Fid啪i"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-"Teie k玫vakettal ei ole piisavalt vaba ruumi paigalduseks v玫i uuenduseks (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Otsin saadaolevaid pakette..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Otsin uuendatavaid pakette..."
+"Argumendid: (length, ndigits=0, nupper=0)\n"
+"\n"
+"M盲盲rab salas玫na minimaalse pikkuse ning numbrite ja suurt盲htede minimaalse "
+"hulga."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Tuvastan juba paigaldatud pakette..."
+msgid "Second floppy drive"
+msgstr "Teine flopiseade"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Otsin saadaolevaid pakette ja loon uuesti rpm andmebaasi..."
+msgid "About Harddrake"
+msgstr "HardDrake info"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Saaleala on paigalduseks liiga v盲ike, palun suurendage seda"
+msgid "Drive capacity"
+msgstr "Ketta eriomadused"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Failis眉steemi %s kontroll eba玫nnestus. Kas soovite vigu parandada? "
-"(Ettevaatust, v玫ite kaotada andmed!)"
+"Pange t眉hi flopi masinasse\n"
+"K玫ik andmed sellel h盲vivad"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Blokkide kontroll?"
+msgid "Size: %s"
+msgstr "Suurus: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Valige partitsioonid, mida soovite vormindada"
+msgid "Control and Shift keys simultaneously"
+msgstr "Ctrl- ja Shift-klahvid korraga"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Partitsioonitabeli s盲ilitamiseks vajate alglaadimist"
+msgid "secondary"
+msgstr "teisene"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ruumi 1MB-se alglaadimisala loomiseks napib! Paigaldus j盲tkub, kuid s眉steemi "
-"alglaadimiseks tuleb Teil luua DiskDrake abil alglaadimisala"
+msgid "View Backup Configuration."
+msgstr "Varundamise s盲tete vaatamine."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Valige haakepunktid"
+msgid "if set to yes, report check result to syslog."
+msgstr "kui on 'jah', saadab kontrolli tulemused syslog-i."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Partitsioonidelt haakepunktide otsimine"
+msgid "No password"
+msgstr "Salas玫na puudub"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Ei leia partitsioone"
+msgid "Nigeria"
+msgstr "Nigeeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "IDE seadistamine"
+msgid "There is no existing partition to use"
+msgstr "Kasutatavat partitsiooni ei leitud"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"Teie s眉steemiga on 眉hendatud\n"
+"\n"
+"%s\n"
+"sk盲nnerid.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kaartide seadmine..."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Et kasutada TCP/Socket printerit, tuleb m盲盲rata printeri masinanimi v玫i IP "
+"ning kui teate, ka pordi number (vaikimisi on see 9100). HP JetDirect "
+"serveritel on pordi number tavaliselt 9100, teistel serveritel v玫ib see olla "
+"teistsugune. Kontrollige seda oma riistvara k盲siraamatust."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Hard drive information"
+msgstr "K玫vaketta info"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emuleeri 3. hiirenuppu"
+msgid "Russian"
+msgstr "Vene"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emuleeri 2. hiirenuppu"
+msgid "Jordan"
+msgstr "Jordaania"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Nuppude emuleerimine"
+msgid "Hide files"
+msgstr "Failide peitmine"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Millisesse jadaporti on Teie hiir 眉hendatud?"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Selle masinaga 眉hendatud printerite automaattuvastus"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse Port"
-msgstr "Hiire port"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV ei ole paigaldatud!\n"
+"\n"
+"\n"
+"Kui Teil on TV-kaart, kuid DrakX ei avastanud seda (failis \"/etc/modules\"\n"
+"puudub nii moodul bttv kui saa7134) ega paigaldanud ka xawtv-d, saatke\n"
+"palun k盲su \"lspcidrake -v -f\" tulemused aadressile \"install"
+"\\@mandrakesoft.com\",\n"
+"m盲rkides subjektireale \"Undetected TV card\".\n"
+"\n"
+"\n"
+"Te v玫ite selle paigaldada, andes administraatorina konsoolis k盲su\n"
+"\"urpmi xawtv\"."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Palun valige hiire t眉眉p."
+msgid "Sorry, no floppy drive available"
+msgstr "Flopiseade ei ole k盲ttesaadav"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "%s kr眉ptov玫ti"
+msgid "Bolivia"
+msgstr "Boliivia"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "%s uuendus"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Seadistage oma Windows-server nii, et printer oleks k盲ttesaadav IPP "
+"protokolliga, ning seadistage tr眉kkimine sellelt masinalt \"%s\" "
+"眉hendust眉眉biga Printerdrakes.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Kas see on paigaldus v玫i uuendamine?"
+msgid "Bad package"
+msgstr "Vigane pakett"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Paigaldus/Uuendamine"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Kujundage vaid m玫ne hiirekl玫psuga enda masinast v玫imas Linuxi server: "
+"veebiserver, meili-, tulem眉眉ri-, marsruutimis-, faili- ja printserver..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "V玫imalike klaviatuuride t盲ielik nimekiri"
+msgid "DrakSec Basic Options"
+msgstr "DrakSeci p玫hiseadistused"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus."
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"M盲rkus: kui Teil on ISA PnP helikaart, tuleb kasutada rakendust sndconfig. "
+"Selleks kirjutage k盲sureale \"sndconfig\"."
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Quit"
-msgstr "V盲lju"
+msgid "Romania"
+msgstr "Rumeenia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "License agreement"
-msgstr "L玫ppkasutaja litsentsileping"
+msgid "choose device"
+msgstr "valige seade"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Tekkis mingi viga"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> v盲ljade vahel | <Space> valib | <F12> j盲rgmine samm "
+msgid "Remove from LVM"
+msgstr "Eemalda LVMist"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linuxi paigaldamine %s"
+msgid "Timezone"
+msgstr "Ajav枚枚nd"
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Flopiseade ei ole k盲ttesaadav"
+msgid "German"
+msgstr "Saksa"
-#: ../../install_steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "See ongi %s"
+msgid "Next ->"
+msgstr "J盲rgmine ->"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"M玫ned t盲htsad paketid ei saanud korralikult paika.\n"
-"Teie CD-lugeja v玫i CD on ilmselt vigane.\n"
-"Paketifaile CD-l saate kontrollida k盲suga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Haakepunkt %s on m盲盲ratud topelt"
+"Selle lubamine v玫imaldab tr眉kkida jaapanikeelseid tekstifaile. Kasutage seda "
+"ainult siis, kui soovite t玫esti jaapanikeelseid tekste tr眉kkida, sest kui "
+"see on sisse l眉litatud, ei ole enam v玫imalik tr眉kkida ladina t盲hestiku "
+"diakriitiliste m盲rkidega t盲hti ega kohandada veeriseid, m盲rgisuurust jne. "
+"See puudutab ainult k盲esoleva masinaga 眉hendatud printereid. Kui soovite "
+"tr眉kkida jaapanikeelset teksti v玫rgus asuva masinaga 眉hendatud printeril, "
+"tuleb see funktsioon tollel masinal sisse l眉litada."
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
-"J盲tkake omal vastutusel."
+"\n"
+"V玫imalik, et on tegemist\n"
+"juhtpartitsiooniga, parem oleks\n"
+"seda mitte puutuda.\n"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Palun oodake"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Ok"
-msgstr "Olgu"
+msgid "Horizontal refresh rate"
+msgstr "Realaotussagedus"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finish"
-msgstr "L玫peta"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Seda haakepunkti ei saa eemaldada, sest partitsioon on kasutusel\n"
+"loopback-ina. Eemaldage esmalt loopback"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Basic"
-msgstr "P玫hiline"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Paigalduse ajal seadistatud v玫rku ei 玫nnestu praegu k盲ivitada. Kontrollige "
+"palun, kas v玫rk on k盲ttesaadav p盲rast s眉steemi uut alglaadimist, ning "
+"korrigeerige seadistust Mandrake Juhtimiskeskuse sektsioonis \"Kohtv玫rk ja "
+"Internet\"/\"脺hendus\", misj盲rel seadistage printer samuti Juhtimiskeskuses, "
+"aga sektsioonis \"Riistvara\"/\"Printer\". "
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Edasij玫udnud"
+msgid "USB controllers"
+msgstr "USB kontrollerid"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Eemalda"
+msgid "What norm is your TV using?"
+msgstr "Millist TV-standardit Te kasutate?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Muuda"
+msgid "Type:"
+msgstr "T眉眉p: "
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Lisa"
+msgid "Share name"
+msgstr "Jagatav printer"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Valige fail"
+msgid "enable"
+msgstr "lubada"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Siin saab valida klahvi v玫i klahvikombinatsiooni, mis laseb\n"
-"vahetada klaviatuuri (nt ladina ja mitte-ladina t盲hestikuga)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Parempoolne \"Windows\"-klahv"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Vasakpoolne \"Windows\"-klahv"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Men眉眉\"-klahv"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt- ja Shift-klahvid korraga"
+"Proovin hankida Mandrake Linuxi veebisaidilt saadaolevate peeglite "
+"nimekirja..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- ja Alt-klahvid korraga"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"V玫rgu taask盲ivitamisel tekkis viga: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock-klahv"
+msgid "Remove the loopback file?"
+msgstr "Kas eemaldada loopback fail?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl- ja Shift-klahvid korraga"
+msgid "Selected size is larger than available space"
+msgstr "Valiku suurus 眉letab saadaolevat kettaruumi"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "M玫lemad Shift-klahvid korraga"
+msgid "NCP server name missing!"
+msgstr "NCP serveri nimi puudub!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Parempoolne Alt-klahv"
+msgid "Please choose your country."
+msgstr "Palun valige oma maa."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavia (ladina)"
+msgid "Hard Disk Backup files..."
+msgstr "K玫vaketta varundamine..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnami \"numbrireaga\" QWERTY"
+msgid "Laotian"
+msgstr "Laose"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "USA (rahvusvaheline)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "USA"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Protokoll rstat laseb 眉le v玫rgu saada informatsiooni\n"
+"s眉steemi t枚枚 kohta. Ettevaatust!"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Briti"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Seadistatud sk盲nnerite nimekirja taasloomine..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukraina"
+msgid "Scanner"
+msgstr "Sk盲nner"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "T眉rgi (modernne \"Q\" mudel)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Hoiatus: selle graafikakaardi test v玫ib Teie arvuti peatada"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "T眉rgi (traditsiooniline \"F\" mudel)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Kasutajanimi tohib sisaldada ainult v盲ikesi t盲hti, numbreid ning m盲rke '-' "
+"ja '_'"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tad啪iki"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Tai"
+msgid "Welcome To Crackers"
+msgstr "Tere tulemast, kr盲kkerid"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamili (kirjutusmasin)"
+msgid "Module options:"
+msgstr "Mooduli parameetrid:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamili (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Tagage oma v玫rkude turvalisus MNF (Multi Network Firewall) abil"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (kirillitsa)"
+msgid "Go on without configuring the network"
+msgstr "J盲tkata ilma v玫rku seadistamata"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaki (QWERTY)"
+msgid "Abort"
+msgstr "Loobu"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaki (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Parooli ei p盲rita masinal %s pordis %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Sloveenia"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "M盲rkige palun, kui soovite kasutada tagasikerimisv玫imaluseta seadet."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Rootsi"
+msgid "Usage of remote scanners"
+msgstr "V玫rgusk盲nneri kasutamine"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Vene (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROM.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Vene"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Teie Windowsi partitsioon on fragmenteerunud. Palun tehke arvutile uus "
+"alglaadimine, k盲ivitage Windows ja seej盲rel utiliit 'defrag' ning tulge siis "
+"Mandrake Linuxi paigalduse juurde tagasi."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rumeenia (QWERTY)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norra)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rumeenia (QWERTZ)"
+msgid "Hard Disk Backup Progress..."
+msgstr "K玫vaketta varundamise edenemine..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
+msgid "Unable to fork: %s"
+msgstr "Fork eba玫nnestus: %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugali"
+msgid "Type: "
+msgstr "T眉眉p: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Poola (QWERTZ)"
+msgid "<-- Edit Client"
+msgstr "<-- Muuda klienti"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Poola (QWERTY)"
+msgid "no fonts found"
+msgstr "fonte ei leitud"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norra"
+msgid "Mouse"
+msgstr "Hiir"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Hollandi"
+msgid "not enough room in /boot"
+msgstr "/boot on liiga t盲is"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malta (USA)"
+msgid "Choosing an arbitratry driver"
+msgstr "Suvalise juhtprogrammi valimine"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malta (briti)"
+msgid "Host name"
+msgstr "Masinanimi"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongoli (kirillitsa)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmari (Birma)"
+msgid "the color of the progress bar"
+msgstr "edenemisriba v盲rv"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedoonia"
+msgid "Suppress Fonts Files"
+msgstr "Fondifailide kustutamine"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malajalami"
+msgid "Add to RAID"
+msgstr "Lisa RAIDi"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Latvian"
-msgstr "L盲ti"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Yabooti jaoks on v玫imalik lisada kirjeid kas teiste operatsioonis眉steemide,\n"
+"alternatiivsete kernelite v玫i h盲daolukorras alglaadimist玫mmise leidmiseks.\n"
+"\n"
+"Teiste operatsioonis眉steemide kirje sisaldab vaid pealdist ja "
+"juurpartitsiooni.\n"
+"\n"
+"Linuxi puhul on v玫imalusi rohkem:\n"
+"\n"
+" * Pealdis: lihtsalt nimetus, mida tuleb kirjutada, kui yaboot p盲rib teilt "
+"alglaadimise\n"
+"ajal, mida laadida.\n"
+"\n"
+" * Laadepilt: alglaaditava kerneli nimetus, tavaliselt vmlinux laiendiga v玫i "
+"ilma selleta.\n"
+"\n"
+" * Juur: juurseade ehk Teie Linuxi ``/''.\n"
+"\n"
+" * Lisand: eriti Apple'i puhul kasutatakse kerneli lisa sageli "
+"videoriistvara l盲htestamiseks\n"
+"v玫i hiirenupu emuleerimiseks klaviatuuril, sest Apple'i riistvarapoodides on "
+"vaid\n"
+"harva n盲ha kahe v玫i kolme nupuga hiiri. M玫ned n盲ited:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: seda v玫imalust v玫ib kasutada kas initsialiseerimismoodulite "
+"laadimiseks\n"
+"enne alglaadimisseadmeni j玫udmist v玫i ramdisk-laadepildi laadimiseks\n"
+"h盲daolukorras.\n"
+"\n"
+" * Initrd-size: ramdiski suurus on tavaliselt 4096 baiti. Kui teil peaks "
+"minema\n"
+"tarvis suuremat, saab seda siin m盲盲rata.\n"
+"\n"
+" * Read-write: tavaliselt initsialiseeritakse juurpartitsioon esmalt vaid "
+"loetavana,\n"
+"et sooritada failis眉steemi kontroll enne seda, kui s眉steem ``ellu 盲rkab''.\n"
+"Siin saab seda muuta.\n"
+"\n"
+" * NoVideo: kui Apple'i videoriistvara peaks v盲ga t玫siseid probleeme "
+"tekitama,\n"
+"saab siin valida v玫imaluse teha alglaadimine resiimis ``novideo'' ehk siis\n"
+"native frame-buffer toega.\n"
+"\n"
+" * Vaikimisi: m盲盲rab antud kirje vaikimisi Linuxi valikuks, mida saab "
+"alglaadida\n"
+"yabooti k盲surea ilmudes vaid vajutusega klahvile ENTER. Kui vajutate "
+"alglaadimise\n"
+"valikute uurimiseks [Tab], on see kirje t盲histatud t盲rniga (``*'')."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Leedu \"foneetiline\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "Printer \"%s\" lisati edukalt StarOffice/OpenOffice.org/GIMP-ile."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Leedu \"numbrireaga\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Flopiseade ei ole k盲ttesaadav!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Leedu AZERTY (uuem)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Seda, millised valikud on saadaval praeguse printeri puhul, saab teada kas "
+"allpool seisvast loendist v玫i p盲rast vajutust nupule \"Tr眉kkimisvalikute "
+"loend\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Leedu AZERTY (vanem)"
+msgid "Continue anyway?"
+msgstr "Kas ikkagi j盲tkata?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laose"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Kui Teie printerit loendis ei leidu, valige m玫ni 眉hilduv (vaadake printeri "
+"k盲siraamatust) v玫i sarnane."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Ladina-Ameerika"
+msgid "Printer"
+msgstr "Printer"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korea"
+msgid "Saudi Arabia"
+msgstr "Saudi Araabia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Jaapani 106 klahviga"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktituti"
+msgid "Some devices were added:\n"
+msgstr "M玫ned seadmed lisati:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Itaalia"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandi"
+msgid "Printing on the printer \"%s\""
+msgstr "Tr眉kkimine printeril \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iraani"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow ja /etc/hosts.deny on juba seadistatud - ei muudeta"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Iisraeli (foneetiline)"
+msgid "Restore From Tape"
+msgstr "Taasta lindilt"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Iisraeli"
+msgid "Choose the profile to configure"
+msgstr "Valige profiil, mida seadistada"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Horvaadi"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Sisestage Zeroconfi masina nimi (ilma punktideta), kui Te\n"
+"ei soovi kasutada vaikimisi antud masina nime."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Ungari"
+msgid "Backup Now from configuration file"
+msgstr "Seadistustefaili varundamine n眉眉d!"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Haakepunkti nimi tohib sisaldada vaid t盲hti ja numbreid"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gud啪arati"
+msgid "Restarting printing system..."
+msgstr "Tr眉kkimiss眉steemi taask盲ivitamine..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Kreeka"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Argumendid: (name)\n"
+"\n"
+"Lisab nime erandite hulka, kui msec uurib salas玫nade aegumist."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruusia (\"ladina\" asetus)"
+msgid "See hardware info"
+msgstr "Info riistvara kohta"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruusia (\"vene\" asetus)"
+msgid "First sector of boot partition"
+msgstr "Partitsiooni algusesse"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Prantsuse"
+msgid "Printer manufacturer, model"
+msgstr "Printeri tootja, mudel"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Soome"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Tr眉ki kohe"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Hispaania"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[V脮TMED]...\n"
+"Mandrake terminaliserveri seadistaja\n"
+"--enable : lubab MTSi\n"
+"--disable : keelab MTSi\n"
+"--start : k盲ivitab MTSi\n"
+"--stop : peatab MTSi\n"
+"--adduser : lisab olemasoleva kasutaja MTSile (n玫utav on "
+"kasutajanimi)\n"
+"--deluser : kustutab olemasoleva kasutaja MTSist (n玫utav on "
+"kasutajanimi)\n"
+"--addclient : lisab kliendimasina MTSile (n玫utav on MAC-aadress, IP, "
+"nbi laadepildi nimi)\n"
+"--delclient : kustutab kliendimasina MTSist (n玫utav on MAC-aadress, IP, "
+"nbi laadepildi nimi)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Eesti"
+msgid "Subnet Mask:"
+msgstr "Alamv玫rgu mask:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Rootsi)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo ja k盲ivituslogo teemade paigaldus 玫nnestus"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norra)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Kaks kriitilist suurust on ekraanisagedus, mis m盲盲rab kogu kuva\n"
+"uuendamise aja, ja realaotussagedus\n"
+"\n"
+"On V脛GA T脛HTIS, et Te ei m盲盲raks siinkohal monitori, mille realaotus on\n"
+"suurem, kui Teie monitor v玫imaldab. Vastasel juhul v玫ib Teie monitor "
+"h盲vida.\n"
+"Kui kahtlete, valige pigem v盲iksem v盲盲rtus."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Modify"
+msgstr "Muuda"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Taani"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"K盲sud \"%s\" ja \"%s\" v玫imaldavad samuti muuta konkreetse tr眉kkimist枚枚 "
+"valikuid. Selleks tuleb vaid lisada soovitud s盲tted k盲sureale, n盲iteks \"%s "
+"<fail>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanaagari"
+msgid "Need hostname, username and password!"
+msgstr "Vaja l盲heb masinanime, kasutajatunnust ja parooli!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Saksa (ilma sammuta)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV on protokoll, mis v玫imaldab haakida veebiserveri kataloogi\n"
+"kohalikult ning k盲sitleda seda kui kohalikku failis眉steemi (eeldusel, et\n"
+"veebiserver on seadistatud WebDAVi serverina). Kui soovite lisada\n"
+"WebDAVi haakepunkte, vajutage nupule \"Uus\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Saksa"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "T拧ehhi (QWERTY)"
+msgid "new"
+msgstr "uus"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "T拧ehhi (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Kas soovite uuesti proovida?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "艩veitsi (Prantsuse asetus)"
+msgid "Wizard"
+msgstr "N玫ustaja"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "艩veitsi (Saksa asetus)"
+msgid "Edit selected server"
+msgstr "Valitud serveri muutmine"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Valgevene"
+msgid "Please choose where you want to backup"
+msgstr "Valige palun, kuhu soovite varukoopia salvestada"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnia"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Partitsioonitabeli s盲ilitamiseks vajate alglaadimist"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiilia (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Veebilehitseja m盲lupuhvri k玫rvalej盲tmine"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaaria (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Palun valige klaviatuuriasetus."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaaria (foneetiline)"
+msgid "Standard"
+msgstr "Standardne"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengali"
+msgid "Please choose your mouse type."
+msgstr "Palun valige hiire t眉眉p."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belgia"
+msgid "Connect..."
+msgstr "脺henda..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbaid啪aani (ladina)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Printeri \"%s\" seadistamine eba玫nnestus!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Araabia"
+msgid "not configured"
+msgstr "seadistamata"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneetiline)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (tr眉kimasin)"
+msgid "About"
+msgstr "Misv盲rk"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armeenia (vanem)"
+msgid "Proxies configuration"
+msgstr "Vahendajate s盲tted"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albaania"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Poola"
+msgid "Start: sector %s\n"
+msgstr "Algus: sektor %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "V玫rguliides on juba seadistatud"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Ei suuda flopit leida!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Sambia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "眉henduse loomine Bugzilla n玫ustajaga ..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "L玫una-Aafrika"
+msgid "Mail Server"
+msgstr "Meiliserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbia"
+msgid "Please click on a partition"
+msgstr "Palun valige partitsioon"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Jeemen"
+msgid "Have a nice day!"
+msgstr "Peatse j盲llen盲gemiseni!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "眉le v玫rgu"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis ja Futuna"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "%s uuendus"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Valige printeri 眉hendusviis"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Neitsisaared (USA)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Telekanalite otsingu edenemine ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Neitsisaared (Briti)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Viga faili saatmisel FTP kaudu.\n"
+" Palun korrigeerige FTP seadistusi."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "IP vahemiku algus:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent ja Grenadiinid"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Interneti \"superserver\" nimega inetd laseb k盲ivituda mitmetel v玫rgu-\n"
+"teenustel, nagu telnet, ftp, rsh, rlogin jne. Inetdi keelamine keelab\n"
+"ka k玫ik teenused, mida see haldab."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
+msgid "the height of the progress bar"
+msgstr "edenemisriba k玫rgus"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Usbekistan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- salvesta %s vahendusel masinale: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "脺hendriikide hajasaared"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+" Aktsepteerib/l眉kkab tagasi 眉ldlevi icmp echo."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Domain Name Server"
+msgstr "Nimeserver"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraina"
+msgid "Security Level:"
+msgstr "Turvatase:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tansaania"
+msgid "Mount points must begin with a leading /"
+msgstr "Haakepunktid peavad algama kaldkriipsuga (/)"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Postfix Mail Server"
+msgstr "Postfix meiliserver"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "V盲lju ilma salvestamata"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad ja Tobago"
+msgid "Yemen"
+msgstr "Jeemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "T眉rgi"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "See toode on saadaval MandrakeStore veebisaidil"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Sisestage palun Drakbackupi\n"
+" suurim lubatud suurus"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tuneesia"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> N眉眉d on Teil mitmeid valikuid (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "T眉rkmenistan"
+msgid "Hard drive detection"
+msgstr "K玫vaketta leidmine"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Ida-Timor"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Te ei valinud 眉htegi paketigruppi.\n"
+"Palun valige meelep盲rane minimaalne paigaldus:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Palun sisestage WebDAV-serveri URL"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tad啪ikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tai"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Prantsuse L玫unaalad"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "T拧aad"
+msgid "Accept"
+msgstr "N玫us"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks ja Caicos"
+msgid "Description"
+msgstr "Kirjeldus"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Svaasimaa"
+msgid "Error opening %s for writing: %s"
+msgstr "%s avamine kirjutamiseks eba玫nnestus: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "S眉眉ria"
+msgid "Mouse type: %s\n"
+msgstr "Hiire t眉眉p: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tom茅 ja Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Valige palun CD/DVD andmekandja suurus (Mb)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Suriname"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+" su lubamine ainult grupi wheel liikmetele v玫i su lubamine igale kasutajale."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somaalia"
+msgid "Expert Area"
+msgstr "Ekspertidele"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Choose a monitor"
+msgstr "Valige monitor"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Empty label not allowed"
+msgstr "T眉hi kirjet盲his ei ole lubatud"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Malta (briti)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakkia"
+msgid "I can't add any more partition"
+msgstr "Partitsioone ei saa enam lisada"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard ja Jan Mayen"
+msgid "Size in MB: "
+msgstr "Suurus (MB): "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Sloveenia"
+msgid "Remote printer"
+msgstr "V玫rguprinter"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid "Please choose a language to use."
+msgstr "Valige palun kasutatav keel."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
+"Valige lihtsalt Olgu, et s盲tteid mitte muuta.\n"
+"Allpool olevate v盲ljade muutmine t眉histab varasemad s盲tted."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudaan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "Teie arvutit saab seada vaikimisi kasutaja sisenemisele."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Sei拧ellid"
+msgid "Floppy format"
+msgstr "Flopi vorming"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Saalomoni saared"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Araabia"
+msgid "Generic Printers"
+msgstr "Tavalised printerid"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Valige palun printer, kuhu tr眉kit枚枚d tuleks saata, v玫i kirjutage "
+"sisendireale seadmenimi/failinimi"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Venemaa"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Selle arvuti k眉lge 眉hendatud sk盲nnerid on teistele k盲ttesaadavad"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Rumeenia"
+msgid "First sector of the root partition"
+msgstr "Juurpartitsiooni algusesse"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "R茅union"
+msgid "Alternative drivers"
+msgstr "Alternatiivsed juhtprogrammid"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Katar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Kontrollige palun k玫iki vajalikke valikuid.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Belau"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cabo Verde"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Kas sel CPU-l on Cyrix 6x86 \"koomaviga\" ?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestiina"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Varased pentiumid olid vigased ning hangusid F00F baidikoodi dekodeerimisel"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Valige palun port, kuhu printer on 眉hendatud, v玫i kirjutage sisendireale "
+"seadmenimi/failinimi"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre ja Miquelon"
+msgid "/Options/Test"
+msgstr "/Eelistused/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Poola"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"See tase muudab k眉ll s眉steemi lihtsalt kasutatavaks, kuid v盲ga\n"
+"haavatavaks: ligip盲盲supiirangute puudumise t玫ttu ei peaks arvutit 眉hendama\n"
+"ei teiste arvutitega ega ka mitte Internetti."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Mounting partition %s"
+msgstr "Partitsiooni %s haakimine"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filipiinid"
+msgid "User name"
+msgstr "Kasutajanimi"
-#: ../../lang.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Paapua Uus-Guinea"
+msgid "New configuration (isdn-light)"
+msgstr "Uus seadistus (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Prantsuse Pol眉neesia"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peruu"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Millisele partitsioonile soovite paigaldada Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "s眉steemseid faile"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Omaan"
+msgid "Test pages"
+msgstr "Testlehek眉ljed"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Uus-Meremaa"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Taastatavate andmete loend:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Checking %s"
+msgstr "%s kontrollimine"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket printeri s盲tted"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Card mem (DMA)"
+msgstr "Kaardi m盲lu (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "Prantsusmaa"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeeria"
+msgid "browse"
+msgstr "lehitse"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolki saar"
+msgid "Checking installed software..."
+msgstr "Paigaldatud tarkvara kontroll..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "V玫rguprinteri nimi puudub!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Uus-Kaledoonia"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Kas soovite tr眉kkimist lubada printeritel Teie kohtv玫rgus?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namiibia"
+msgid "Turkey"
+msgstr "T眉rgi"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mosambiik"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaisia"
+msgid "Number of buttons"
+msgstr "Nuppude arv"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mehhiko"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnami \"numbrireaga\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Moodul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldiivid"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Lisaks sellele ei saa 眉le kanda j盲rjekordi, mis on loodud k盲esoleva "
+"programmi v玫i \"foomatic-configure\" poolt."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "Hardware"
+msgstr "Riistvara"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl- ja Alt-klahvid korraga"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "USA"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritaania"
+msgid "Default OS?"
+msgstr "Vaikimisi OS?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "艩veitsi (Saksa asetus)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "P玫hja-Mariaani saared"
+msgid "Configure all heads independently"
+msgstr "Seadista k玫ik monitorid s玫ltumatult"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongoolia"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Valige palun printer, mida soovite rakendada. Printeri seadistused peaksid "
+"toimima t盲iesti automaatselt. Kui printer tuvastati valesti v玫i Te eelistate "
+"selle seadistusi korrigeerida, l眉litage sisse \"K盲sitsiseadistamine\"."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "NTP Server"
+msgstr "NTP server"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Laadi flopilt/Salvesta flopile"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedoonia"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Sellel teemal ei ole veel 眉htegi k盲ivituslogo %s !"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshalli saared"
+msgid "nice"
+msgstr "kena"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Leaving in %d seconds"
+msgstr "L玫puni %d sekundit"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Millisesse jadaporti on Teie modem 眉hendatud?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Country"
+msgstr "Maa"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+msgid "Property"
+msgstr "Omadus"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Liib眉a"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "L盲ti"
+msgid "LAN Configuration"
+msgstr "LAN s盲tted"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburg"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Leedu"
+msgid "Path or Module required"
+msgstr "Kataloogi v玫i mooduli n玫udmine"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Muud valikud"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Libeeria"
+msgid "Coma bug"
+msgstr "\"Koomaviga\""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"N眉眉d peate valima partitsiooni(d), kuhu soovite Mandrake Linuxi paigaldada.\n"
+"Kui need on juba olemas kas GNU/Linuxi varasema paigalduse v玫i m玫ne muu\n"
+"kettajagamisvahendi tegevuse tulemusena, v玫ite kasutada olemasolevaid\n"
+"partitsioone. Vastasel juhul tuleb need luua.\n"
+"\n"
+"Partitsioon on loogiliselt eraldatud k玫vaketta piirkond, mille suurust\n"
+"ei ole v玫imalik hiljem, t枚枚tavas s眉steemis enam muuta. Samuti h盲vivad\n"
+"partitsiooni kustutamisel k玫ik sellel sisalduvad andmed.\n"
+"\n"
+"Et muuta seda tegevust lihtsamaks, on loodud n玫ustaja, mille soovitused\n"
+"on harilikult m玫istlikud.\n"
+"\n"
+"Partitsioonide loomiseks valige esmalt k玫vaketas. ``hda'' t盲hendab siin "
+"esimest\n"
+"IDE-ketast, ``hdb'' teist IDE-ketast, ``sda'' esimest SCSI-ketast ja nii "
+"edasi.\n"
+"\n"
+"Valitud ketta partitsioneerimiseks on j盲rgmised v玫imalused:\n"
+"\n"
+" * \"%s\": kustutatakse k玫ik olemasolevad partitsioonid\n"
+"sellel kettal.\n"
+"\n"
+" * \"%s\": sel juhul tekitatakse Linuxile vajalikud\n"
+"partitsioonid vabale kettapinnale automaatselt.\n"
+"\n"
+"\"%s\": pakub m玫ned lisav玫imalused:\n"
+" * \"%s\": salvestab partitsioonitabeli flopikettale.\n"
+"Sellest on kasu hilisemal partitsioonitabeli taastamisel, kui seda vaja\n"
+"peaks olema. Igal juhul on 盲盲rmiselt soovitav see samm ette v玫tta.\n"
+"\n"
+" * \"%s\": v玫imaldab taastada flopikettalt varem\n"
+"salvestatud partitsioonitabeli.\n"
+"\n"
+" * \"%s\": kui partitsioonitabel on vigastatud, v玫ib\n"
+"proovida seda parandada. Palun 盲rge selle peale siiski liiga palju lootke.\n"
+"\n"
+" * \"%s\": kui soovite t眉histada k玫ik enda tehtud muutused ja alustada algse "
+"partitsioonitabeliga.\n"
+"\n"
+" * \"%s\": selle v玫imaluse\n"
+"t眉histamine sunnib kasutajaid k盲sitsi haakima ja lahutama eemaldatavaid\n"
+"andmekandjaid, st flopikettaid ja CD-ROMe.\n"
+"\n"
+" * \"%s\": kui soovite uue partitsioonitabeli loomisel samm-sammulist\n"
+"juhatust. See on soovitatav, kui Te ei ole varem midagi sellist teinud.\n"
+"\n"
+" * \"%s\": selle v玫imalusega saab t眉histada k玫ik tehtud muudatused.\n"
+"\n"
+" * \"%s\": v玫imaldab partitsioonidega ette\n"
+"v玫tta lisaoperatsioone (t眉眉p, v玫tmed, vorming) ning pakub rohkem infot.\n"
+"\n"
+" * \"%s\": Partitsiooni suurust m盲盲rates saate seda t盲pselt paika\n"
+"panna klaviatuuril asuvaid nooleklahve kasutades.\n"
+"\n"
+"M盲rkus: igale v玫imalusele p盲盲seb ligi ka klaviatuuri abil. Partitsioonidel\n"
+"saab liikuda klahvidega [Tab] ning 眉les-alla nooleklahvidega.\n"
+"\n"
+"Valitud partitsioonil on v玫imalikud j盲rgmised tegevused:\n"
+"\n"
+" * Ctrl-c uue partitsiooni loomine (kui valitud on t眉hi partitsioon).\n"
+"\n"
+" * Ctrl-d partitsiooni kustutamine.\n"
+"\n"
+" * Ctrl-m haakepunkti seadmine.\n"
+"\n"
+"L盲hemat infot erinevate failis眉steemit眉眉pide kohta leiab k盲siraamatu\n"
+"peat眉kist ext2FS.\n"
+"\n"
+"Kui paigaldus toimub PPC-masinale, tuleks luua v盲hemalt 1MB suurune\n"
+"v盲ike HFS ``bootstrap'' partitsioon, mida kasutab alglaadur yaboot. Kui Te\n"
+"aga teete selle partitsiooni natukene suuremaks (n盲iteks nii umbes 50MB),\n"
+"on see p盲ris hea koht, kuhu h盲daolukorraks paigutada tagavarakernel\n"
+"ja ramdisk-laadepildid."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Videokaart\n"
+"\n"
+" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt masinale\n"
+"paigaldatud videokaardi. Kui see ei 玫nnestu, saate nimekirjast valida\n"
+"kaardi, mis tegelikult on masinale paigaldatud.\n"
+"\n"
+" Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n"
+"kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n"
+"k玫ige enam vastab."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "There was an error installing packages:"
+msgstr "Pakettide paigaldamisel tekkis viga:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Liibanon"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjeti s盲tted"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "Tagasi"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kasahstan"
+msgid "Save partition table"
+msgstr "Kirjuta partitsioonitabel"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kaimanisaared"
+msgid "Finnish"
+msgstr "Soome"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuveit"
+msgid "Macedonia"
+msgstr "Makedoonia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Kasutaja kaupa jagamise lubamine rakendab gruppi \"fileshare\". \n"
+"Sellesse gruppi kasutajate lisamiseks saab tarvitada userdraket."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "P玫hja-Korea"
+msgid "Slovenian"
+msgstr "Sloveenia"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts ja Nevis"
+msgid "Libya"
+msgstr "Liib眉a"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Komoorid"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "H盲盲lestan skriptid, paigaldan tarkvara, k盲ivitan serverid..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- kirjuta CD-le"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambod啪a"
+msgid "Table"
+msgstr "Tabel"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "K玫rg玫zstan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ei oska seadet %s vormindada t眉眉pi %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Keenia"
+msgid "Model"
+msgstr "Mudel"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Jaapan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Libsafe lubamine/keelamine, kui see s眉steemist leitakse."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordaania"
+msgid "Stop Server"
+msgstr "Serveri peatamine"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Valige teema LiLo-le\n"
+"ja k盲ivituslogole,\n"
+"neid v玫ib valida\n"
+"ka eraldi"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Island"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iraan"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Argumendid: (arg, listen_tcp=None)\n"
+"\n"
+"Lubab/keelab X-i 眉hendused. Esimene arg m盲盲rab, mida tehakse kliendi \n"
+"poolel: ALL (k玫ik 眉hendused on lubatud), LOCAL (ainult kohalikud \n"
+"眉hendused) ja NONE (眉hendusi ei lubata)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Iraak"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Briti India ookeani ala"
+msgid "Use auto detection"
+msgstr "Kasuta automaattuvastust"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "India"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM annab v玫imaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
+"l玫ikamisele/kleepimisele saab kasutada ka men眉眉s眉steeme."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Iisrael"
+msgid "Started on boot"
+msgstr "K盲ivitub laadimisel"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Iirimaa"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"脺hinege MandrakeSofti tugimeeskondadega ning Linuxi kogukonnaga Internetis, "
+"et jagada oma kogemusi ning aidata ka teistel saada tunnustatud ekspertideks "
+"tehnilise toe veebilehek眉ljel:"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indoneesia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"S眉steemi turvalisuse kohandamiseks saab seadistada\n"
+"j盲rgmisi parameetreid. Seletuste saamiseks vaadake abivihjeid.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Ungari"
+msgid "Automatically find available printers on remote machines"
+msgstr "Otsi automaatselt k玫iki k盲ttesaadavaid v玫rguprintereid"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- salvesta lindile seadmel: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Horvaatia"
+msgid "East Timor"
+msgstr "Ida-Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Kustuta profiil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard ja McDonald"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Lubab/keelab kasutajate nimekirja kuvahalduritel (kdm ja gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hongkong"
+msgid "Installing Foomatic..."
+msgstr "Foomaticu paigaldamine..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Hiina"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Palun v盲ljuge ja vajutage siis Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "tuvastati"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "V玫rk tuleb uuesti k盲ivitada. Kas soovite seda teha?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Pakett:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "/etc/sysconfig/bootsplash kirjutamine eba玫nnestus."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "L玫una-Georgia ja L玫una-Sandwichi saared"
+msgid "SECURITY WARNING!"
+msgstr "TURVAHOIATUS!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatoriaal-Guinea"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Ei taha automaatselt siseneda"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Windows Migration tool"
+msgstr "Windowsi 眉mberkolimise vahend"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "All languages"
+msgstr "K玫ik keeled"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Gr枚枚nimaa"
+msgid "Removing %s"
+msgstr "%s eemaldamine"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Testime Teie 眉hendust..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Puhvri suurus"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Prantsuse Guajaana"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Salas玫nad on n眉眉d kasutusel, kuid v玫rku 眉hendamine ei ole siiski soovitav."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Gruusia"
+msgid "Start sector: "
+msgstr "Algsektor: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Suurbritannia"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Pakett %s tuleks kindlasti paigaldada. Kas soovite seda teha?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Sei拧ellid"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "F盲盲ri saared"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake v玫rdles printeri automaattuvastusel leitud mudelinime oma "
+"printeri andmebaasis leiduvate mudelitega, et leida sobiv vaste. Valik v玫ib "
+"olla ekslik, eriti juhul, kui Teie printerit ei peaks mingil p玫hjusel "
+"andmebaasis leiduma. Seep盲rast kontrollige, kas valik on 玫ige ning vajutage "
+"\"Mudel 玫ige\", kui see on nii, v玫i \"Mudeli valik k盲sitsi\", kui midagi on "
+"valesti, mille j盲rel saate j盲rgmisel sammul valida printeri mudeli "
+"iseseisvalt.\n"
+"\n"
+"Teie printeri puhul leidis Printerdrake:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikroneesia"
+msgid "Bad password on %s"
+msgstr "Halb parool %s puhul"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandi saared (Malviinid)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"脺ks tundmatu printer on Teie s眉steemi otse 眉hendatud"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fid啪i"
+msgid "Zambia"
+msgstr "Sambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Soome"
+msgid "Security Administrator (login or email)"
+msgstr "Turvaadministraator (kasutajatunnus v玫i e-posti aadress)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etioopia"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Vabandust, me toetame ainult 2.4 kerneleid."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Hispaania"
+msgid "Romanian (qwerty)"
+msgstr "Rumeenia (QWERTY)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Under Devel ... please wait."
+msgstr "Tegutsen ... palun oodake."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "L盲盲ne-Sahara"
+msgid "Czech Republic"
+msgstr "T拧ehhi"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Egiptus"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Eesti"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Al啪eeria"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikaani Vabariik"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: ../../lang.pm:1
+#
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Taani"
+msgid "Old configuration (isdn4net)"
+msgstr "Vana seadistus (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Sound card"
+msgstr "Helikaart"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "K眉pros"
+msgid "Import Fonts"
+msgstr "Fontide importimine"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "J玫ulusaar"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Teil on 眉ks suur FAT partitsioon\n"
+"(tavaliselt kasutab sellist MS DOS/Windows)\n"
+"Soovitame Teil esmalt selle suurust muuta\n"
+"(kl玫psake ja siis valige \"Muuda\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cabo Verde"
+msgid "Suppress Temporary Files"
+msgstr "Ajutiste failide kustutamine"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Kuuba"
+msgid "Change partition type"
+msgstr "Muuda partitsiooni t眉眉pi"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Colombia"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"Kuvatihedus\n"
+"\n"
+" Siin saate valida Teie riistvaraga sobiva kuvatiheduse ja v盲rvis眉gavuse.\n"
+"Kui Te paigalduse j盲rel leiate, et siin valitu siiski ei k玫lba, saate seda\n"
+"hiljem muuta. Valitud seadistust n盲idatakse monitoril."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Network Options"
+msgstr "V玫rguparameetrid"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "T拧iili"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Teema n盲itamine\n"
+"konsoolis"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cooki saared"
+msgid "Statistics"
+msgstr "Statistika"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "(on %s)"
+msgstr "(masinal %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "艩veits"
+msgid "MM Series"
+msgstr "MM seeria"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr "Teek, mis kaitseb puhvri 眉let盲ite ja vormingustringide r眉nnaku vastu."
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "Kesk-Aafrika Vabariik"
+msgid "average"
+msgstr "keskmine"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "New printer name"
+msgstr "Uus printeri nimi"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kookosesaared"
+msgid "Equatorial Guinea"
+msgstr "Ekvatoriaal-Guinea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Lubab/keelab automaatse sisselogimise."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Varukoopia loomine"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Valgevene"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Faili tr眉kkimiseks k盲surealt (terminaliaken) kasutage k盲sku \"%s <fail>\" "
+"v玫i \"%s <fail>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Praegu ei ole 眉htegi teist v玫imalust"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet' saar"
+msgid "Romanian (qwertz)"
+msgstr "Rumeenia (QWERTZ)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Write Config"
+msgstr "Salvesta seadistus"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahama saared"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed on RIP deemon, mis vahetab selle protokolli alusel\n"
+"marsruutimisinfot. Kui Teil on RIP kasutusel, on vajalik ka routed."
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasiilia"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Boliivia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Lubab/keelab administraatori sisselogimise v玫rgust."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
+msgid "Browse"
+msgstr "Lehitse"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "CDROM"
+msgstr "CD-ROM"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Kas soovite oma Interneti眉hendust proovida?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belgia"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrein"
+msgid "Do you have an ISA sound card?"
+msgstr "Kas Teil on ISA helikaart?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgaaria"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"脺htegi v玫rgukaarti ei 玫nnestunud tuvastada\n"
+"Seega ei saa ka sellist 眉hendust seadistada."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "Hetkt玫mmiseid ei saa teha enne partitsioneerimist"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Host Name"
+msgstr "Masinanimi"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia ja Hertsegoviina"
+msgid "/File/Save _As"
+msgstr "/Fail/Salvesta _Kui"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbaid啪aan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Juurdep盲盲su saamiseks CUPS serverite printeritele Teie kohtv玫rgus tuleb vaid "
+"盲ra m盲rkida v玫imalus \"Otsi automaatselt k玫iki k盲ttesaadavaid v玫rguprintereid"
+"\". CUPS serverid annavad Teie masinale automaatselt teada oma printeritest. "
+"K玫ik Teie masinale parajasti k盲ttesaadavad printerid on n盲idatud "
+"Printerdrake peaakna sektsioonis \"V玫rguprinterid\". Kui CUPS server(id) ei "
+"asu kohtv玫rgus, tuleb nende kohta info hankimiseks sisestada IP aadress(id) "
+"ning v玫imaluse/vajaduse korral ka pordi number."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s puudub sk盲nnerite andmebaasis, kas seadistada see k盲sitsi?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Austraalia"
+msgid "Delay before booting default image"
+msgstr "Ooteaeg alglaadimisel"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Ameerika Samoa"
+msgid "Restrict command line options"
+msgstr "Piira k盲surea suvandeid"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid "East Europe"
+msgstr "Ida-Euroopa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktika"
+msgid "Use free space"
+msgstr "Kasuta vaba ruumi"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Hollandi Antillid"
+msgid "Mail alert"
+msgstr "Meilihoiatus"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armeenia"
+msgid "Internet configuration"
+msgstr "Interneti s盲tted"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albaania"
+msgid "Uzbekistan"
+msgstr "Usbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "Tuvastati %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua ja Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/_Printerite automaattuvastus"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Araabia 脺hendemiraadid"
+msgid "Finish"
+msgstr "L玫peta"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Show automatically selected packages"
+msgstr "N盲ita automaatselt valitud pakette"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU lipud kerneli teatel"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ring眉hendus %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Eemalda enne kettar眉hmad (logical volumes)\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "2.2 kernelitel pole enam PCMCIA tuge. Kasutage palun 2.4 kernelit."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "KEERUTAGE RATTAKEST!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Hiire aktiveerimiseks"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Palun testige hiirt"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Hiir puudub"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Midagi l盲ks valesti! - Kas mkisofs on ikka paigaldatud?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "ei soovi"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 nupuga"
+msgid "Please try again"
+msgstr "Palun proovige veel"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 nupuga"
+msgid "The model is correct"
+msgstr "Mudel 玫ige"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 nupuga"
+msgid "FAT resizing failed: %s"
+msgstr "FATi suuruse muutmine eba玫nnestus: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "siinihiir"
+msgid "Individual package selection"
+msgstr "Valik paketthaaval"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "See partitsioon ei ole muudetav"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech (jadaport, vana C7 t眉眉pi)"
+msgid "Location"
+msgstr "Asukoht"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (kaabel-hrc)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM seeria"
+msgid "Journalised FS"
+msgstr "Kirjendatud FS"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "See masin"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC seeria"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS kettat盲his: %s (arvatavasti)\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Valige failid v玫i kataloogid ja kl玫psake 'Lisa'"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahrein"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "scsi moodulite vahelej盲tt"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Tavaline 3 nupuga hiir"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "CPU perekond (nt 6, kui on i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Tavaline 2 nupuga hiir"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"V玫rgu眉hendus on juba seadistatud, sest paigaldatakse ju v玫rgust.\n"
+"Kui soovite neid seadistusi s盲ilitada, valige Olgu, muidu katkestage ja "
+"saate seadistada uuesti.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "jadapordi"
+msgid "Keyboard layout: %s\n"
+msgstr "Klaviatuuriasetus: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Siin saate valida, millised selle arvuti k眉lge kinnitatud printerid peaksid "
+"olema k盲ttesaadavad ka teistele kohtv玫rgu arvutitele ja millistele nende "
+"hulgast."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rattaga"
+msgid "Maltese (US)"
+msgstr "Malta (USA)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "Tavaline"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Haagib ja lahutab k玫iki v玫rgufailis眉steeme\n"
+"(nii NFS, SMB kui ka NCP)."
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "TV-kaart"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Toggle between normal/expert mode"
+msgstr "Ekspert > Tavakasutaja"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Tavaline PS2 rattaga hiir"
+msgid "Size"
+msgstr "Suurus"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "GRUB"
+msgstr "GRUB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standardne"
+msgid "Greenland"
+msgstr "Gr枚枚nimaa"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Suni hiir"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Sorteeritud v玫i sorteerimata"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sulge puu"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Ava puu"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Kas see on sobiv?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*.*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "K玫lbmatu varukoopia"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Taastamine failist %s eba玫nnestus: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Lindi nimi pole korrektne. Lint kannab nime %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Partitsioonitabelis on miskip盲rast t眉hi koht, aga see ei ole kasutatav.\n"
-"Ainuke lahendus on nihutada primaarset partitsiooni, et \"auk\" satuks "
-"laiendatud partitsioonide k玫rvale."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Sellel platvormil ei saa laiendatud partitsiooni luua"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "haakimine eba玫nnestus: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "v玫ib olla"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "kena"
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "very nice"
-msgstr "v盲ga kena"
+"Interneti眉henduse jagamine on juba seadistatud\n"
+"ja see on ka praegu aktiivne.\n"
+"\n"
+"Mida soovite ette v玫tta?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "important"
-msgstr "t盲htis"
+msgid "Delete All NBIs"
+msgstr "Kustuta k玫ik v玫rgu alglaadefailid"
-#: ../../pkgs.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "must have"
-msgstr "vajalik"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"See dialoog aitab t盲pselt h盲盲lestada alglaadimist:\n"
+"\n"
+" * \"%s\": siin on kolm valikut:\n"
+"\n"
+" * \"%s\": kui eelistate grubi (tekstimen眉眉).\n"
+"\n"
+" * \"%s\": kui eelistate LiLot teksti kujul.\n"
+"\n"
+" * \"%s\": kui eelistate LiLot graafilisel kujul.\n"
+"\n"
+" * \"%s\": enamasti ei ole s眉gavat m玫tet muuta vaikimisi valikut\n"
+"(\"%s\"), aga kui Te v盲ga soovite, v玫ib alglaaduri paigaldada ka teisele\n"
+"k玫vakettale (\"%s\") v玫i isegi flopikettale (\"%s\").\n"
+"\n"
+" * \"%s\": arvutile alglaadimist tehes pakutakse Teile v玫imalust v盲ikeseks\n"
+"pausiks, mille jooksul saab alglaadimismen眉眉st valida m玫ne muu kirje kui\n"
+"vaikimisi pakutu.\n"
+"\n"
+"!! Pange t盲hele, et kui Te otsustate alglaadurit mitte paigaldada (kl玫psates "
+"siin\n"
+"nupule \"%s\"), peate kuidagi leidma mooduse, kuidas oma Mandrake\n"
+"Linux siiski t枚枚le saada! Ja p盲ris hea oleks, kui Te kindlalt teaksite, mida "
+"teete,\n"
+"enne kui m玫nda siin pakutud v玫imalust muuta. !!\n"
+"\n"
+"Kl玫psuga nupul \"%s\" saab n盲ha veel mitmeid valikuid, mis on m玫eldud\n"
+"kogenud kasutajatele."
-#: ../../raid.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei ole piisavalt partitsioone RAID-%d jaoks\n"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"kui on lubatud, saadab meiliraporti sellele aadressile, muidu "
+"administraatorile."
-#: ../../raid.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid eba玫nnestus"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Millist XFree seadistust soovite kasutada?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid eba玫nnestus (v玫ib-olla puudub 'raidtools'?)"
+msgid "More"
+msgstr "Veel..."
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Sellel turvatasemel v玫ib s眉steemi kasutada Internetis ka serverina.\n"
+" Turvalisus on n眉眉d piisavalt k玫rge, et t枚枚tades serverina v玫ib masin\n"
+"vastu v玫tta ka palju kliente. M盲rkus: kui Teie masin kasutab Internetti\n"
+"ainult kliendina, v玫iks valida madalama taseme."
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Stop"
-msgstr "Peata"
+msgid "Account Password"
+msgstr "Salas玫na"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start"
-msgstr "K盲ivita"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Otsustasite paigaldada alglaaduri partitsioonile.\n"
+"See eeldab, et Teil on juba alglaadur k玫vakettal, millelt Te alglaadimise "
+"sooritate (nt System Commander).\n"
+"\n"
+"Milliselt kettalt Te alglaadimise teete?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Alglaadimisel"
+msgid "Tajik keyboard"
+msgstr "Tad啪iki"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-"Selle teenuse kohta\n"
-"ei oska lisainfot anda."
+"Teil on v玫imalus kopeerida printeri s盲tted, mida m盲盲rasite spuulerile %s, "
+"Teie praegusele spuulerile %s. 脺le kantakse k玫ik s盲tete andmed (printeri "
+"nimi, kirjeldus, asukoht, 眉hendusviis, vaikevalikud), aga mitte t枚枚d.\n"
+"K玫iki j盲rjekordi ei saa 眉le kanda j盲rgmistel p玫hjustel:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Services and deamons"
-msgstr "Teenused ja deemonid"
+msgid "Font List"
+msgstr "Fontide loend"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "peatatud"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Alglaaduri v玫imaldamiseks tuleb Teil muuta oma Open Firmware\n"
+" alglaadimisseadet. Hoidke taask盲ivituse ajal all klahve\n"
+" Command-Option-O-F ja kirjutage:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Seej盲rel kirjutage: shut-down\n"
+"J盲rgmisel k盲ivitusel peaksite n盲gema alglaaduri k盲surida."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "running"
-msgstr "t枚枚tab"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Paistab, et Teil on OldWorld-i v玫i hoopis tundmatu\n"
+" masin, igatahes alglaadur yaboot siin ei t枚枚ta.\n"
+"Paigaldus k眉ll j盲tkub, aga masina k盲ivitamiseks\n"
+" tuleb Teil kasutada BootX-i v玫i mingit muud nippi"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valige, millised teenused tuleks alglaadimisel k盲ivitada"
+msgid "Select file"
+msgstr "Valige fail"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Andmebaasi server"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"Valige palun v玫rk v玫i masin, mille jaoks soovite siinseid printereid v盲lja "
+"jagada."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Kaughaldus"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Neid k盲ske saab kasutada ka paljude rakenduste tr眉kkimisdialoogi v盲ljal "
+"\"Tr眉kkimisk盲sk\", kuid seal pole vaja kirjutada failinime, sest selle annab "
+"rakendus ise.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Failide jagamine"
+msgid "Japan"
+msgstr "Jaapan"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Print option list"
+msgstr "Tr眉kkimisvalikute loend"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Printing"
-msgstr "Tr眉kkimine"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Muudatus on tehtud, aga selle rakendamiseks tuleb v盲lja logida"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "K盲ivitab X fondiserveri, ilma milleta X lihtsalt ei l盲he k盲ima."
+msgid "Search servers"
+msgstr "Serverite otsing"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Laeb draiverid USB-seadmete tarbeks."
+msgid "NCP queue name missing!"
+msgstr "NCP j盲rjekorra nimi puudub!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr "Syslog-i kaudu toimub s眉steemis toimiva logimine. Vajalik!"
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
+"Hoiatus, avastati veel 眉ks Interneti眉hendus, mis v玫ib-olla kasutab Teie v玫rku"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "K盲ivitab helis眉steemi"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD pealdisega \"%s\""
#: ../../services.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Protokoll rwho laseb 眉le v玫rgu saada informatsiooni\n"
-"s眉steemi kasutajate kohta. Ettevaatust!"
+"Salvestab ja taastab juhuarvude genereerimiseks vajaliku\n"
+"s眉steemse entroopiasalve."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Protokoll rusers laseb 眉le v玫rgu saada informatsiooni\n"
-"s眉steemi kasutajate kohta. Ettevaatust!"
+"Failis眉steemi %s kontroll eba玫nnestus. Kas soovite vigu parandada? "
+"(Ettevaatust, v玫ite kaotada andmed!)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokoll rstat laseb 眉le v玫rgu saada informatsiooni\n"
-"s眉steemi t枚枚 kohta. Ettevaatust!"
+msgid "Turn your computer into a reliable server"
+msgstr "Muutke oma masin usaldust v盲盲rivaks serveriks"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed on RIP deemon, mis vahetab selle protokolli alusel\n"
-"marsruutimisinfot. Kui Teil on RIP kasutusel, on vajalik ka routed."
+msgid " (driver %s)"
+msgstr " (juhtprogramm %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Toorseadmete seostamine blokkseadmetega\n"
-"(n盲iteks k玫vaketta partitsioonid)\n"
-"selliste rakenduste, nagu Oracle v玫i DVD m盲ngijad tarbeks"
+"Loopback fail(id):\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salvestab ja taastab juhuarvude genereerimiseks vajaliku\n"
-"s眉steemse entroopiasalve."
+msgid "I don't know"
+msgstr "Ei tea"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on meili transpordiagent, see t盲hendab rakendus,\n"
-"mis toimetab meili 眉hest masinast teise."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP masinal \"%s\", port %s"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"portmapper haldab RPC 眉hendusi, mida kasutavad NFS ja NIS.\n"
-"Neil serveritel on see h盲davajalik."
+"P眉眉ate hakata seadistama automaatpaigalduse flopit. See on natuke ohtlik "
+"tegevus, mida tuleb teha v盲ga ettevaatlikult.\n"
+"\n"
+"Seda v玫imalust kasutades saate korrata arvutile tehtud paigaldust ning m玫ne "
+"sammu puhul ka ise kaasa r盲盲kida, et 眉ksikuid v盲盲rtusi muuta.\n"
+"\n"
+"T盲ieliku turvalisuse huvides ei tuleks partitsioneerimist ja vormindamist "
+"kunagi lubada automaatselt sooritada, seda hoolimata sellest, millise "
+"v玫imaluse kasuks olete paigalduse algul otsustanud.\n"
+"\n"
+"Kas soovite n眉眉d j盲tkata?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"PCMCIA tugi on tavaliselt vajalik s眉learvutitele v玫rgu- ja\n"
-"modemiliideste lisamiseks."
+"\n"
+"\n"
+"Teie helikaart kasutab praegu %s\"%s\" juhtprogrammi (selle kaardi "
+"vaikedraiver on \"%s\")"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Toetab OKI 4w ja sellega 眉hilduvaid winprintereid."
+msgid "Post Uninstall"
+msgstr "Eemaldamisj盲rgsed seadistused"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "L眉litab automaatselt alglaadimise ajal sisse NumLock-i."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll.\n"
-"See programm t盲idab NFS failide lukustamise funktsioone.\n"
-"Vajalik serveerimisel."
+msgid "Cpuid level"
+msgstr "Cpuid tase"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll.\n"
-"See t盲idab NFS serveri funktsioone ja seadistatakse failis /etc/exports."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongoli (kirillitsa)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "Aktiveerib s眉steemi alglaadimisel k玫ik vajalikud v玫rguliidesed."
+msgid "Add a module"
+msgstr "Lisa moodul"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Haagib ja lahutab k玫iki v玫rgufailis眉steeme\n"
-"(nii NFS, SMB kui ka NCP)."
+msgid "Profile to delete:"
+msgstr "Kustutatav profiil:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS hierarhiat, "
-"t玫lkimaks nimesid IP-aadressideks."
+msgid "Local measure"
+msgstr "Kohalikud andmed"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linuxi virtuaalserver, mis on m玫eldud veatult t枚枚tavaks ja igati\n"
-"k盲ttesaadavaks serveriks."
+msgid "busmouse"
+msgstr "siinihiir"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd on tr眉kideemon, ilma selleta ei ole v玫imalik tr眉kkida.\n"
-"P玫him玫tteliselt on see server, mis saadab t枚枚 printeri(te)le."
+msgid "Account Login (user name)"
+msgstr "Kasutajatunnus"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
+msgstr "FDIV viga"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Linuxconf sooritab m玫nikord alglaadimise ajal mitmesuguseid\n"
-"asju s眉steemi seadistuse s盲ilitamiseks."
+"drakfirewalli seadistaja\n"
+"\n"
+"Kontrollige enne j盲tkamist, et olete seadistanud p盲盲su v玫rku/Internetti\n"
+"drakconnecti abil."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Riistvara automaatne tuvastamine ja seadistamine alglaadimisel."
+msgid "Benin"
+msgstr "Benin"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Kerneli p盲ise automaatne regenereerimine partitsioonil /boot\n"
-"/usr/include/linux/{autoconf,version}.h jaoks"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"See pakett laeb s眉steemi k盲ivitumisel klaviatuuripaigutuse vastavalt\n"
-"failis /etc/sysconfig/keyboard kirjeldatule. V盲he on juhtumeid, kus\n"
-"seda teenust vaja ei l盲heks."
+msgid "Path selection"
+msgstr "Asukoha valik"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"K盲ivitab paketifiltri Linuxi kerneliseeriale 2.2 ning loob\n"
-"tulem眉眉ri, mis kaitseb Teie masinat r眉nnakute eest Internetist."
+msgid "Name/IP address of host:"
+msgstr "Masina nimi/IP aadress:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneti \"superserver\" nimega inetd laseb k盲ivituda mitmetel v玫rgu-\n"
-"teenustel, nagu telnet, ftp, rsh, rlogin jne. Inetdi keelamine keelab\n"
-"ka k玫ik teenused, mida see haldab."
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Apache on maailma juhtiv veebiserveri programm. T玫en盲oliselt\n"
-"ka v玫imsaim."
+"Teie k玫vakettal juhtub imelikke asju. \n"
+"Andmete pidevuse kontroll eba玫nnestus. \n"
+"See t盲hendab, et kettale kirjutamisel tekivad jamad."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kontrollib riistvara ja lisav玫imalusena ka seadistab\n"
-"uue v玫i muudetud riistvara."
+msgid "Printer host name or IP missing!"
+msgstr "Printeri masinanimi v玫i IP puudub!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM annab v玫imaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
-"l玫ikamisele/kleepimisele saab kasutada ka men眉眉s眉steeme."
+msgid "Please check all users that you want to include in your backup."
+msgstr "M盲rkige palun k玫ik kasutajad, keda soovite varukoopiasse kaasata."
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Cron on UNIXi s眉steemide standardvahend kasutaja programmide perioodiliseks\n"
-"k盲ivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
-"mugavust t玫stvaid omadusi. Soovitatav s眉steemile, mis t枚枚tab 24h."
+"See %s sk盲nner tuleb seadistada printerdrake abil.\n"
+"Printerdrake saab k盲ivitada Mandrake juhtimiskeskuse riistvara sektsioonist."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Laseb k盲ivitada 眉hekordseid k盲ske etteantud ajal v玫i ootab s眉steemi\n"
-"koormuse laskumist k盲su k盲ivitamiseks piisavale tasemele."
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd on kasutusel p玫hiliselt s眉learvutites akude t盲ituvuse j盲lgimiseks.\n"
-"Samuti suudab see aku t眉hjenemisel s眉steemi viisakalt seisata."
+msgid "Japan (cable)"
+msgstr "Jaapan (kaabel)"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"Anacron k盲ivitab programme perioodiliselt analoogiliselt cron-ile.\n"
-"Kasutage seda juhul, kui Teie arvuti ei t枚枚ta 24h."
+"\n"
+"Printeri seadistamise n玫ustaja\n"
+"\n"
+"N玫ustaja aitab Teil paigaldada printeri(d), mis on 眉hendatud selle arvutiga, "
+"otse v玫rku v玫i v玫rgus asuva Windowsi masinaga.\n"
+"\n"
+"Kui Teil on printer(eid), mis on 眉hendatud selle masinaga, 眉hendage see/need "
+"palun arvutiga ja l眉litage sisse, et seda/neid oleks v玫imalik automaatselt "
+"tuvastada. Ka v玫rguprinter(id) ja Windowsi-masinad peavad olema 眉hendatud ja "
+"sisse l眉litatud.\n"
+"\n"
+"Pange t盲hele, et v玫rguprinteri(te) automaattuvastus v玫tab rohkem aega kui "
+"ainult selle masinaga 眉hendatud printeri(te) tuvastamine. Nii et kui teil "
+"seda vaja ei ole, l眉litage v玫rgus ja/v玫i Windowsi taga olevate printeri(te) "
+"automaattuvastus v盲lja.\n"
+"\n"
+"Kui olete valmis, vajutage \"J盲rgmine\", v玫i \"Katkesta\", kui Te ei soovi "
+"printeri(te) seadistamisega praegu tegelda."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Helis眉steemi ALSA (Advanced Linux Sound Architecture) k盲ivitamine"
+msgid "Initial tests"
+msgstr "K盲ivitustestid"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Pakettide paigaldamine..."
+msgid "Continue"
+msgstr "J盲tka"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Kasutamine: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version]"
+msgid "Custom Restore"
+msgstr "Taastamise kohandamine"
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-" [k玫ik]\n"
-" XFDrake [--noauto] monitor\n"
-" XFDrake kuvatihedus"
+"\"%s\": kui s眉steemis leiti helikaart, n盲idatakse seda siin.\n"
+"Kui m盲rkate, et n盲idatav helikaart ei ole mitte see, mis s眉steemis\n"
+"Teie teada tegelikult on, kl玫psake nuppu ja valige uus juhtprogramm."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Script-based"
+msgstr "Skriptip玫hine"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[V脮TI]...\n"
-" --no-confirmation ei k眉sita esimest kinnitust MandrakeUpdate "
-"resiimis\n"
-" -no-verify-rpm pakettide signatuure ei kontrollita\n"
-" --changelog-first n盲itab kirjelduse aknas enne faililoendit "
-"muudatuste logi\n"
-" -merge-all-rpmnew proovib liita k玫ik leitud failid .rpmnew/.rpmsave"
+msgid "Error reading file %s"
+msgstr "Viga faili %s lugemisel"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "PLL:"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[V脮TMED]\n"
-"Kohtv玫rgu ja Interneti 眉henduse ja j盲lgimise rakendus\n"
-"\n"
-"--defaultintf liides : n盲idab vaikimis antud liidest\n"
-"--connect : 眉hendab Internetiga, kui ei ole veel 眉hendust\n"
-"--disconnect : lahutab Internetist, kui on juba 眉hendus\n"
-"--force : koos v玫tmega (dis)connect : sunni 眉hendama/lahutama\n"
-"--status : vastuseks 1, kui on 眉hendatud, muul juhul 0 ja v盲ljumine.\n"
-"--quiet : l眉litab v盲lja interaktiivsuse. Koos v玫tmega (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Teil peab olema FAT-partitsioon haagitud asukohas /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-"[--file=minufail] [--word=minus玫na] [--explain=regulaaravaldis] [--alert]"
+msgid " on "
+msgstr " masinal "
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[klaviatuur]"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL peab algama kas http:// v玫i https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[V脮TMED]...\n"
-"Mandrake terminaliserveri seadistaja\n"
-"--enable : lubab MTSi\n"
-"--disable : keelab MTSi\n"
-"--start : k盲ivitab MTSi\n"
-"--stop : peatab MTSi\n"
-"--adduser : lisab olemasoleva kasutaja MTSile (n玫utav on "
-"kasutajanimi)\n"
-"--deluser : kustutab olemasoleva kasutaja MTSist (n玫utav on "
-"kasutajanimi)\n"
-"--addclient : lisab kliendimasina MTSile (n玫utav on MAC-aadress, IP, "
-"nbi laadepildi nimi)\n"
-"--delclient : kustutab kliendimasina MTSist (n玫utav on MAC-aadress, IP, "
-"nbi laadepildi nimi)"
+"Siin saab m盲盲rata konkreetselt URI printerile ligip盲盲suks. URI peab j盲rgima "
+"CUPSi v玫i Foomaticu spetsifikatsiooni. Pange t盲hele, et mitte k玫ik spuulerid "
+"ei toeta k玫iki URI t眉眉pe."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Fontide importimise ja j盲lgimise "
-"rakendus \n"
-"--windows_import : impordib k玫igilt saadaolevailt windowsi "
-"partitsioonidelt.\n"
-"--xls_fonts : n盲itab k玫iki fonte, mis on juba saadud xls-ist.\n"
-"--strong : fontide tugev verifitseerimine.\n"
-"--install : paigaldada iga fondifail ja kataloog.\n"
-"--uninstall : eemaldada iga font v玫i fondikataloog.\n"
-"--replace : asendada k玫ik fondid, kui on juba olemas.\n"
-"--application : 0 mitte 眉kski rakendus.\n"
-" : 1 iga toetatud ja saadaolev rakendus.\n"
-" : rakenduse_nimi n盲iteks so StarOffice'i \n"
-" : ja gs GhostScripti puhul."
+msgid "Other OS (SunOS...)"
+msgstr "Muu OS (SunOS...)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[V脮TMED] [RAKENDUSE_NIMI]\n"
-"\n"
-"V脮TMED:\n"
-" --help - n盲itab k盲esolevat abiteadet.\n"
-" -report - rakendus peab olema 眉ks Mandrake t枚枚riistadest\n"
-" -incident - rakendus peab olema 眉ks Mandrake t枚枚riistadest"
+msgid "Install/Upgrade"
+msgstr "Paigaldus/Uuendamine"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paketti"
#: ../../standalone.pm:1
#, c-format
@@ -7397,4846 +6851,5296 @@ msgstr ""
"--help : n盲itab k盲esolevat abiteadet.\n"
"--version : n盲itab versiooni nime.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "N玫utav on domeeni autentimine"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"K盲esolev rakendus on vaba tarkvara. Te v玫ite seda edasi levitada\n"
-"ja/v玫i muuta vastavalt GNU 脺ldise Avaliku Litsentsi tingimustele, nagu\n"
-"need on avaldanud Vaba Tarkvara Fond; kas Litsentsi versioon number 2\n"
-"v玫i (vastavalt Teie valikule) 眉ksk玫ik milline hilisem versioon.\n"
"\n"
-"Seda rakendust levitatakse lootuses, et see on kasulik, kuid\n"
-"ILMA IGASUGUSE GARANTIITA; isegi KESKMISE/TAVALISE\n"
-"KVALITEEDI GARANTIITA v玫i SOBIVUSELE TEATUD KINDLAKS\n"
-"EESM脛RGIKS. 脺ksikasjade suhtes vaadake GNU 脺ldist Avalikku Litsentsi.\n"
"\n"
-"Te peaks olema saanud GNU 脺ldise Avaliku Litsentsi koopia koos selle\n"
-"rakendusega; kui ei, siis v玫tke 眉hendust Vaba Tarkvara Fondiga aadressil:\n"
-"Free Software Foundation, 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "V盲lju programmist"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Uuenduste paigaldus"
+" T盲name:\n"
+"\t- LTSP projekti http://www.ltsp.org\n"
+"\t- Michael rowni <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Teenuste s盲tted"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "X-i seadistamine"
+msgid "Use libsafe for servers"
+msgstr "Serveritel kasutatakse libsafe'i"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Alglaaduri s盲tted"
+msgid "Icelandic"
+msgstr "Islandi"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "V玫rgus盲tted"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Kasutamine: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version]"
-#: ../../steps.pm:1
+# c-format
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Tavakasutaja"
+msgid "Please relog into %s to activate the changes"
+msgstr "Muudatuste aktiveerimiseks k盲ivitage %s uuesti"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Administraatori salas玫na"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*.*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "S眉steemi paigaldus"
+msgid "Lilo/grub mode"
+msgstr "LiLo/grub resiim"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Pakettide valik"
+msgid "Output"
+msgstr "V盲ljund"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Vormindamine"
+msgid "Circular mounts %s\n"
+msgstr "Ring眉hendus %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "K玫vaketta jagamine"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Klaviatuuri valik"
+msgid "HardDrive / NFS"
+msgstr "K玫vaketas / NFS"
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Valige paigaldusmeetod"
+msgid "a number"
+msgstr "number"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "K玫vaketta leidmine"
+msgid "Swedish"
+msgstr "Rootsi"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Hiire seadmine"
+msgid "Which %s driver should I try?"
+msgstr "Millist %s juhtprogrammi peaksime proovima?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Litsents"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Saate hoiatuse, kui 眉ks valitud teenustest enam ei t枚枚ta"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Valige sobiv keel"
+msgid "Filesystem types:"
+msgstr "Failis眉steemi t眉眉bid: "
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", mitme funktsiooniga seade HP JetDirectil"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "Olgu"
+msgid "Northern Mariana Islands"
+msgstr "P玫hja-Mariaani saared"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ei soovi"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "kasutaja :"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (paigalduse kuvadraiver)"
+msgid "Please enter your password"
+msgstr "Sisestage palun parool"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA V脮IB OLLA EBASTABIILNE."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr "Loodava profiili nimi (uus profiil luuakse praeguse koopiana) :"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s koos 3D graafikakiirendi toega"
+msgid "Floppy"
+msgstr "Flopi"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA V脮IB OLLA EBASTABIILNE.\n"
-"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."
+"M盲rkige palun, kui soovite puhastada oma RW andmekandja (esimene seanss)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"XFree %s toetab Teie videokaarti ja v玫ib omada paremat 2D tuge."
+msgid "Ghostscript referencing"
+msgstr "Ghostcsripti m盲盲ratlused"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Alglaadur"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Seadista ainult kaart \"%s\"%s"
+msgid "Move"
+msgstr "Liiguta"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Kasuta Xinerama laiendusi"
+msgid "Bootloader to use"
+msgstr "Eelistatav alglaadur"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Seadista k玫ik monitorid s玫ltumatult"
+msgid "SMB server host"
+msgstr "SMB serveri nimi"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Millist XFree seadistust soovite kasutada?"
+msgid "Name Servers:"
+msgstr "Nimeserverid:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree s盲tted"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Hoiatus\n"
+"\n"
+"Palun lugege hoolega j盲rgnevat teksti. Kui Te ei ole n玫us k玫igi "
+"allj盲rgnevate\n"
+"v盲idetega, on paigaldamine j盲rgmise CD pealt keelatud. Vajutage 'Keeldun',\n"
+"et j盲tkata paigaldamist ilma selle CD-ta.\n"
+"\n"
+"\n"
+"M玫ned komponendid j盲rgmisel CD-l ei ole kaitstud 脺ldise Avaliku Litsentsi\n"
+"v玫i muude sarnaste litsentsidega, vaid kasutavad omaenda erilisi\n"
+"litsentsivorme. Seep盲rast lugege sellised litsentsid hoolega l盲bi ja\n"
+"tutvuge nende tingimustega, enne kui hakata neid komponente kasutama\n"
+"v玫i levitama.\n"
+"脺ldiselt kipuvad sellised litsentsid keelama komponendi kopeerimise,\n"
+"duplitseerimise (v盲lja arvatud varundamise sihil), edastamise, muutmise\n"
+"v玫i edasiarendamise.\n"
+"Litsentsilepingu tingimuste rikkumine l玫petab otsekohe k玫ik Teie 玫igused,\n"
+"mis kaasnesid litsentsiga n玫ustumisel. Kui m玫ni konkreetne litsentsi\n"
+"punkt Teile selliseid 玫igusi ei anna, ei v玫i Te enamasti paigaldada "
+"rakendust\n"
+"enam kui 眉hte s眉steemi ega muuta seda v玫rgut枚枚 huvides. Kui Te ei ole\n"
+"tingimustes kindel, v玫tke 眉hendust komponendi levitaja v玫i arendajaga.\n"
+"脺ldjuhul on selliste komponentide, sealhulgas dokumentatsiooni, edastamine\n"
+"kolmandale poolele v玫i kopeerimine keelatud.\n"
+"\n"
+"\n"
+"K玫igi j盲rgmisel CD-l paiknevate komponentide 玫igused kuuluvad vastavalt\n"
+"nende autorile ning on kaitstud tarkvara puhul kehtivate intellektuaalse\n"
+"omandi ja autori玫iguse seadustega.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Valige graafikam盲lu suurus"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Eemalda StarOffice/OpenOffice.org/GIMP-ilt"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"S眉steemis on v玫imalik kasutada mitut monitori.\n"
-"Mida Te soovite teha?"
+"Linuxi virtuaalserver, mis on m玫eldud veatult t枚枚tavaks ja igati\n"
+"k盲ttesaadavaks serveriks."
-#
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Mitme monitori seadistamine"
+msgid "4 billion colors (32 bits)"
+msgstr "4 miljardit v盲rvi (32 bitti)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Valige X server"
+msgid "Micronesia"
+msgstr "Mikroneesia"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "X server"
-msgstr "X server"
+msgid "License"
+msgstr "Litsents"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB v玫i rohkem"
+msgid "This may take a moment to generate the keys."
+msgstr "V玫tmete genereerimine v玫tab m玫ne hetke aega."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Printeri automaattuvastus (kohalikud, TCP/Socketi ja SMB printerid)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (pppoa vahendusel) usb"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Tekkis viga: failis眉steemi loomiseks ei leitud 眉htki seadet. Palun "
+"kontrollige oma riistvara."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Starting the printing system at boot time"
+msgstr "Tr眉kkimiss眉steem k盲ivitatakse alglaadimisel"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Kas soovite luua 眉henduse juba alglaadimisel?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr "Protsessori ID"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr "Heliprobleemide lahendamine"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Poola (QWERTY)"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "aktiveeri n眉眉d"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Kas s盲ilitada muudatused?\n"
-"Olemasolevad s盲tted:\n"
"\n"
-"%s"
+"Drakbackupi tegevus CD vahendusel:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Eelistused"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Te p眉眉ate praegu paigaldada tr眉kkimiss眉steemi %s s眉steemi, mis t枚枚tab "
+"turvatasemel '%s'.\n"
+"\n"
+"See tr眉kkimiss眉steem k盲ivitab deemoni (taustal t枚枚tava protsessina), mis "
+"v玫tab vastu ja k盲sitleb tr眉kkimist枚id. Deemonile p盲盲seb v玫rgu kaudu ligi ka "
+"kaugmasinatelt, mist玫ttu see kujutab endast v玫imaliku r眉nnaku objekti. "
+"Seet玫ttu k盲ivitatakse selle turvataseme puhul vaikimisi ainult m玫ned valitud "
+"deemonid.\n"
+"\n"
+"Kas soovite t玫esti seadistada tr眉kkimist sellel masinal?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "Masin \"%s\", port %s"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "Kuvatihedus"
+msgid "This partition can't be used for loopback"
+msgstr "Seda partitsiooni ei saa loopback-ina kasutada"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "File already exists. Use it?"
+msgstr "Fail on juba olemas. Kas kasutada seda?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Graafikakaart"
+msgid "received: "
+msgstr "saadud: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Ekraaniuuendussagedus"
+msgid "Right Alt key"
+msgstr "Parempoolne Alt-klahv"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Realaotussagedus"
+msgid "the list of alternative drivers for this sound card"
+msgstr "selle helikaardi alternatiivsete juhtprogrammide loend"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kaks kriitilist suurust on ekraanisagedus, mis m盲盲rab kogu kuva\n"
-"uuendamise aja, ja realaotussagedus\n"
-"\n"
-"On V脛GA T脛HTIS, et Te ei m盲盲raks siinkohal monitori, mille realaotus on\n"
-"suurem, kui Teie monitor v玫imaldab. Vastasel juhul v玫ib Teie monitor "
-"h盲vida.\n"
-"Kui kahtlete, valige pigem v盲iksem v盲盲rtus."
+msgid "Gateway"
+msgstr "Vaikel眉眉s"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play test eba玫nnestus. Palun valige monitor t盲psemalt"
+msgid "Scanner sharing"
+msgstr "Sk盲nneri jagamine"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Tootja"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tuneesia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Valige monitor"
+msgid "Profile: "
+msgstr "Profiil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Graafikakaart: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Kl玫ps seadmel vasakul asuvas puus n盲itab siin selle kohta k盲ivat infot."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Valige kuvatihedus ja v盲rvis眉gavus"
+msgid "XawTV isn't installed!"
+msgstr "XawTV ei ole paigaldatud!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "Kuvatihedused"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Loo/Kanna 眉le\n"
+"varundusv玫tmed SSH jaoks"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardit v盲rvi (32 bitti)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Kriitiliste failide k玫rvalej盲tmine (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miljonit v盲rvi (24 bitti)"
+msgid "old static device name used in dev package"
+msgstr "vana staatiline seadmenimi, mis oli kasutusel paketis dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhat v盲rvi (16 bitti)"
+msgid "This label is already used"
+msgstr "Selline pealdis on juba kasutusel"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhat v盲rvi (15 bitti)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Printeri seadistamise n玫ustaja\n"
+"\n"
+"N玫ustaja aitab Teil paigaldada printeri(d), mis on 眉hendatud selle arvutiga "
+"v玫i otse v玫rku.\n"
+"\n"
+"Kui Teil on printer(eid), mis on 眉hendatud selle masinaga, 眉hendage palun "
+"see/need arvutiga ja l眉litage sisse, et seda/neid saaks automaatselt "
+"tuvastada. Ka v玫rguprinter(id) peavad olema 眉hendatud ja sisse l眉litatud.\n"
+"\n"
+"Pange t盲hele, et v玫rguprinterite automaattuvastus v玫tab rohkem aega kui "
+"ainult selle masinaga 眉hendatud printeri(te) automaatne tuvastamine. Nii et "
+"kui te seda ei vaja, l眉litage v玫rguprinterite automaattuvastus v盲lja.\n"
+"\n"
+"Kui olete valmis, vajutage \"J盲rgmine\", v玫i \"Katkesta\", kui Te ei soovi "
+"praegu printeri(te) seadistamisega tegelda."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 v盲rvi (8 bitti)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Partitsiooni %s vormindamisel h盲vivad sellel k玫ik andmed"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Kas see on sobiv?"
+msgid "Connection Time: "
+msgstr "脺henduse kestvus: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "L玫puni %d sekundit"
+msgid "select perm file to see/edit"
+msgstr "loafaili valik vaatamiseks/muutmiseks"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Juhtus viga:\n"
-"%s\n"
-"Proovige m玫nda parameetrit muuta"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Hoiatus: selle graafikakaardi test v玫ib Teie arvuti peatada"
+"Palun sisestage paigaldus-CD lugejasse ja vajutage <Olgu>.\n"
+"Kui teil s盲herdust ei ole, vajutage <Katkesta>, et kiiruuendust v盲ltida."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Kas soovite seadistusi proovida?"
+msgid "Use group id for execution"
+msgstr "K盲ivitamiseks kasutatakse grupi id-d"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Proovime seadistusi"
+msgid "Choose the default user:"
+msgstr "Valige vaikimisi kasutaja:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Millist TV-standardit Te kasutate?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Paistab, et Teie videokaardil on TV OUT v盲ljund.\n"
-"Seda on v玫imalik kasutada j盲rgnevalt:\n"
-"\n"
-"脺hendage arvuti televiisoriga enne alglaadimist ja valige laademen眉眉st\n"
-" \"TVout\" \n"
"\n"
-"Kas soovite seda kasutama hakata?"
+"Kui v玫rgus on CUPS server, siis ei ole Teil vaja siin printereid seadistada, "
+"need leitakse automaatselt."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Teie arvutis on v玫imalik k盲ivitada X juba alglaadimisel.\n"
-"Kas soovite nii teha?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X k盲ivitub koos s眉steemiga"
+"Mandrake Linux toetab paljusid keeli. Valige keeled, mida\n"
+"soovite paigaldada. Kui paigaldus on l玫petatud ja Te teete\n"
+"s眉steemile taask盲ivituse, saate neid kasutada."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 juhtprogramm: %s\n"
+msgid "Domain"
+msgstr "Domeen"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Kui vaja, t盲psustage RAM suurust (leitud %d MB)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Kuvatihedus: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LiLo ja grub on GNU/Linuxi alglaadurid. Tavaliselt k盲ib siin k玫ik t盲iesti\n"
+"automaatselt. DrakX uurib ketta alglaadimissektorit ja talitab vastavalt\n"
+"sellele, mida ta sealt leiab:\n"
+"\n"
+" * kui leitakse Windowsi alglaadimissektor, asendatatakse see grub/LiLo\n"
+"alglaadimissektoriga. Nii v玫ite laadida kas GNU/Linuxi v玫i m玫ne muu OS-i.\n"
+"\n"
+" * kui leitakse grub-i v玫i LiLo alglaadimissektor, asendatakse see uuega.\n"
+"\n"
+"Kui DrakX ei suuda asjast aru saada, k眉sitakse Teie k盲est, kuhu alglaadur\n"
+"paigutada."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "V盲rvis眉gavus: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 (v玫ib j盲tta t眉hjaks)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Videom盲lu: %s kB\n"
+msgid "Boot device"
+msgstr "Alglaadimisseade"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Graafikakaart: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Millist partitsiooni soovite muuta?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekraaniuuendussagedus: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "脺hendriikide hajasaared"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Realaotussagedus: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Vahend logide j盲lgimiseks"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiire port: %s\n"
+msgid "detected on port %s"
+msgstr "leiti pordis %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiire t眉眉p: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatuuriasetus: %s\n"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Options: %s"
-msgstr "Eelistused: %s"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "Haakepunkt:"
+msgid "Graphics card: %s\n"
+msgstr "Graafikakaart: %s\n"
-#: ../../diskdrake/dav.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Server: "
-msgstr "Server: "
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL peab algama kas http:// v玫i https://"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "M盲rkige palun, kui kasutate DVDRAM seadet"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Palun sisestage WebDAV-serveri URL"
+msgid "Splash selection"
+msgstr "K盲ivituslogo valik"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Haakepunkt"
+msgid "Extended partition not supported on this platform"
+msgstr "Sellel platvormil ei saa laiendatud partitsiooni luua"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Server"
-msgstr "Server"
+msgid "ISDN Configuration"
+msgstr "ISDN s盲tted"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount"
-msgstr "Haagi"
+msgid "high"
+msgstr "k玫rge"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unmount"
-msgstr "Lahuta"
+msgid "Internet Connection Sharing"
+msgstr "Interneti眉henduse jagamine"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New"
-msgstr "Uus"
+msgid "Choose file"
+msgstr "Faili valimine"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-"WebDAV on protokoll, mis v玫imaldab haakida veebiserveri kataloogi\n"
-"kohalikult ning k盲sitleda seda kui kohalikku failis眉steemi (eeldusel, et\n"
-"veebiserver on seadistatud WebDAVi serverina). Kui soovite lisada\n"
-"WebDAVi haakepunkte, vajutage nupule \"Uus\"."
+"Hoiatus! Leiti olemasolevad tulem眉眉ri s盲tted. T玫en盲oliselt peaksite need "
+"hiljem 眉le vaatama."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Kasutage pigem ``%s''"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Tr眉kkimine/fotokaartide ligip盲盲s seadmel \"%s\""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Type"
-msgstr "T眉眉p"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Kas soovite tr眉kkimist lubada 眉lalmainitud printeritel v玫i printeritel Teie "
+"kohtv玫rgus?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Kasutage enne \"Lahuta\""
+msgid "Printer default settings"
+msgstr "Printeri vaikes盲tted"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Delete"
-msgstr "Kustuta"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Tavaline PS2 rattaga hiir"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Tekita"
+msgid "Removing old printer \"%s\"..."
+msgstr "Vana printeri \"%s\" eemaldamine..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Failis眉steemi t眉眉bid: "
+msgid "Select a device !"
+msgstr "Valige seade !"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "T眉hi"
+msgid "Remove selected server"
+msgstr "Valitud serveri eemaldamine"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "French Southern Territories"
+msgstr "Prantsuse L玫unaalad"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "the vendor name of the processor"
+msgstr "protsessori tootja nimi"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "All data on this partition should be backed-up"
+msgstr "Selle partitsiooni andmetest v玫iks olla varukoopia"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Swap"
-msgstr "Saaleala"
+msgid "Installing package %s"
+msgstr "Paketi %s paigaldamine"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Kirjendatud FS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Kontrollin ja h盲盲lestan HPOJ.."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Et saada rohkem partitsioone, kustutage palun 眉ks, et luua laiendatud "
+"partitsioon"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "K玫vakettaid ei leitud"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Teie printer on seadistatud automaatselt ja v玫imaldab Teil oma arvutilt ligi "
+"p盲盲seda fotokaardiketastele. Fotokaartidele p盲盲seb ligi graafilise rakenduse "
+"\"MtoolsFM\" (men眉眉s: \"Rakendused\" -> \"Failivahendid\" -> \"Failihaldur "
+"MTools\") v玫i k盲sureavahendi \"mtools\" abil (andke k盲sureal k盲sk \"man "
+"mtools\", et saada selle kohta rohkem infot). Kaartide failis眉steemi leiate "
+"kettal \"p:\" v玫i m玫nel sellele j盲rgneva t盲hega kettal, kui Teil juhtub "
+"olema enam kui 眉ks HP fotokaardiseadmega printer. Rakenduses \"MtoolsFM\" "
+"v玫ite liikuda ketaste vahel faililoendi 眉lal paremas nurgas asuval v盲ljal "
+"leiduvaid t盲hti vahetades."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Palun valige partitsioon"
+msgid "Choose packages to install"
+msgstr "Pakettide valik"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Teil on 眉ks suur FAT partitsioon\n"
-"(tavaliselt kasutab sellist MS DOS/Windows)\n"
-"Soovitame Teil esmalt selle suurust muuta\n"
-"(kl玫psake ja siis valige \"Muuda\")"
+"\n"
+" M玫ned vead meili saatmisel sendmail-iga on\n"
+" p玫hjustatud postfixi seadistuste vigadest. Nende\n"
+" k玫rvaldamiseks m盲盲rake 'myhostname' v玫i\n"
+" 'mydomain' failis /etc/postfix/main.cf\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Valige tegevus"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Kettal %s h盲vivad K脮IK partitsioonid ja andmed"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wizard"
-msgstr "N玫ustaja"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Teie k玫vakettal ei ole piisavalt vaba ruumi paigalduseks v玫i uuenduseks (%d "
+"> %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-"Kui soovite kasutada aboot-i, j盲tke palun ketta algusesse v盲hemalt 2048 \n"
-"sektorit vaba ruumi"
+"Iga printer vajab nime (n盲iteks \"printer\"). Kirjelduse ja asukoha v盲lja ei "
+"ole vaja tingimata t盲ita, need on vaid kommentaarid kasutajatele."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Palun tehke oma andmetest k玫igepealt varukoopia"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"%s\": kl玫ps nupul \"%s\" avab printeri seadistamise\n"
+"n玫ustaja. Uurige l盲hemalt k盲ivitusjuhiste vastavast peat眉kist, kuidas\n"
+"uut printerit h盲盲lestada. Siin n盲idatav sarnaneb sellele, mida v玫isite\n"
+"n盲ha paigalduse ajal."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "Lugege hoolega!"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Kr眉ptov玫ti (uuesti)"
+msgid "Network interface"
+msgstr "V玫rguliides"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Kr眉ptov玫ti"
+msgid "Reading printer data..."
+msgstr "Printeri andmete lugemine..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Kr眉ptov玫tmed ei klapi"
+msgid "Korean keyboard"
+msgstr "Korea"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "See kr眉ptov玫ti on liiga lihtne (peaks olema v盲hemalt %d m盲rki)"
+msgid "Not connected"
+msgstr "Ei ole 眉hendatud"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Valige failis眉steemi kr眉ptov玫ti"
+msgid "Greek"
+msgstr "Kreeka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Failis眉steemi kr眉ptov玫ti"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Kui \\fIarg\\fP = ALL, on lubatud nii /etc/issue kui /etc/issue.net. kui \n"
+"\\fIarg\\fP = NONE, ei ole lubatud muud v盲ljundid kui need, mida m盲盲rab \n"
+"/etc/issue."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Type: "
-msgstr "T眉眉p: "
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts ja Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "kanalil %d id %d\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"脺lekanne oli edukas\n"
+"V玫ite kontrollida, kas suudate serverile sisse logida k盲suga:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"ilma et Teilt k眉sitaks parooli."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitsioonitabeli t眉眉p: %s\n"
+msgid "Enable OF Boot?"
+msgstr "OF laadimine lubatud?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-kettad %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "JFS ei ole kasutatav alla 16MB partitsioonidel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Ekraaniuuendussagedus: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"
+msgid "path"
+msgstr "asukoht"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Suurus: %s\n"
+msgid "Mount point"
+msgstr "Haakepunkt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Ainult lugemis玫igusega"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Juhtus viga:\n"
+"%s\n"
+"Proovige m玫nda parameetrit muuta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Device: "
-msgstr "Seade: "
+msgid "Restore system"
+msgstr "S眉steemi taastamine"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"\n"
-"See on eriline, alglaadimisel\n"
-"kasutatav partitsioon, mis\n"
-"v玫imaldab mitme operatsioonis眉steemi\n"
-"laadimist.\n"
+"Nende masinate jaoks on selle arvuti k眉ljes olevad sk盲nnerid k盲ttesaadavaks "
+"tehtud:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP end ip"
+msgstr "DHCP vahemiku l玫pu ip"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Another one"
+msgstr "Veel 眉ks"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Drakbackup"
+msgstr "Drakbackup"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Colombia"
+msgstr "Colombia"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Current configuration of `%s':\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"'%s' praegused s盲tted:\n"
"\n"
-"V玫imalik, et on tegemist\n"
-"juhtpartitsiooniga, parem oleks\n"
-"seda mitte puutuda.\n"
+"V玫rk: %s\n"
+"IP aadress: %s\n"
+"IP omistamine: %s\n"
+"Juhtprogramm: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faili nimi: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-kettad %s\n"
+msgid "Reunion"
+msgstr "R茅union"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "脺hiku suurus %s\n"
+msgid "Details"
+msgstr "脺ksikasjad"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Tase %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Turvakaalutlusel katkestan n眉眉d 眉henduse."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partitsioonilt toimub alglaadimine\n"
-" (MS-DOS-i, mitte lilo jaoks)\n"
+msgid "Synchronization tool"
+msgstr "S眉nkroniseerimisvahend"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback fail(id):\n"
-" %s\n"
+msgid "Checking your system..."
+msgstr "S眉steemi kontrollimine..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Print"
+msgstr "Tr眉ki"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mounted\n"
-msgstr "Haagitud\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Sisestage lint nimega %s\n"
+" lindiseadmesse %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Vormindamata\n"
+msgid "Mongolia"
+msgstr "Mongoolia"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Vormindatud\n"
+msgid "Mounted\n"
+msgstr "Haagitud\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindrid %d kuni %d\n"
+msgid "Graphical Interface"
+msgstr "Graafiline kasutajaliides"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorit"
+msgid "Restore Users"
+msgstr "Kasutajate taastamine"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Suurus: %s"
+msgid "Encryption key for %s"
+msgstr "%s kr眉ptov玫ti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Algus: sektor %s\n"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper haldab RPC 眉hendusi, mida kasutavad NFS ja NIS.\n"
+"Neil serveritel on see h盲davajalik."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "Nimi: "
+msgid "Detected hardware"
+msgstr "Tuvastatud riistvara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kettat盲his: %s (arvatavasti)\n"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partitsioon %s kannab n眉眉d nime %s"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmari (Birma)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "%s eemaldamine"
+msgid "Enabling swap partition %s"
+msgstr "Vormindan saaleala %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "%s kopeerimine"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Sobivat FAT-partitsiooni loopback-ina kasutamiseks ei leitud (ei ole "
+"piisavalt ruumi)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Failide liigutamine uuele partitsioonile"
+msgid "Armenian (old)"
+msgstr "Armeenia (vanem)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Kataloogis %s on juba andmed\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hide files"
-msgstr "Failide peitmine"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Liiguta failid uuele partitsioonile"
+"Printer nimega \"%s\" on juba %s olemas. \n"
+"Vajutage \"Kanna 眉le\" selle 眉lekirjutamiseks.\n"
+"Te v玫ite k眉ll ka sisestada uue nime v玫i selle printeri vahele j盲tta."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s vormindamisel h盲vivad sellel k玫ik andmed"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "Leidke oma probleemidele lahendus MandrakeSofti internetitoe abil"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Muudatuste rakendamiseks vajate alglaadimist"
+msgid ", host \"%s\", port %s"
+msgstr ", masin \"%s\", port %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ketta %s partitsioonitabel salvestatakse!"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Vajalik on pakett %s. Kas paigaldada see?"
+msgid "%s formatting of %s failed"
+msgstr "%s vormindamine seadmel %s eba玫nnestus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Mis t眉眉pi partitsioonid teete?"
+msgid "Partitioning failed: %s"
+msgstr "Ketta jagamine eba玫nnestus: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Vaadake ette: see v玫ib olla ohtlik."
+msgid "Canada (cable)"
+msgstr "Kanada (kaabel)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "chunk size"
-msgstr "眉hiku suurus"
+msgid "Upgrade"
+msgstr "Uuendus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "level"
-msgstr "tase"
+msgid "Workstation"
+msgstr "T枚枚jaam"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "seade"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Paketi %s paigaldamine\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Various"
-msgstr "Mitmesugust"
+msgid "Kyrgyzstan"
+msgstr "K玫rg玫zstan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Haakimise valikud"
+msgid "With basic documentation"
+msgstr "Baasdokumentatsiooniga"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Fail on juba olemas. Kas kasutada seda?"
+msgid "Anacron is a periodic command scheduler."
+msgstr ""
+"Anacron k盲ivitab programme perioodiliselt analoogiliselt cron-ile.\n"
+"Kasutage seda juhul, kui Teie arvuti ei t枚枚ta 24h."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "See fail on juba loopback-ina kasutusel, valige m玫ni muu"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Teil peab olema juurpartitsioon.\n"
+"Selleks looge uus partitsioon (v玫i valige 眉ks olemasolevatest).\n"
+"Siis valige tegevus \"Haakepunkt\" ja m盲盲rake see kui '/'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Failinimi"
+msgid "Proxy should be http://..."
+msgstr "Vahendaja peab olema kujul http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Failis眉steemi t眉眉p: "
+msgid "South Africa"
+msgstr "L玫una-Aafrika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Suurus (MB): "
+msgid "Western Sahara"
+msgstr "L盲盲ne-Sahara"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback faili nimi:"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot flopi/ISO"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Modify printer configuration"
+msgstr "Printeri seadistuste muutmine"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Seda partitsiooni ei saa loopback-ina kasutada"
+msgid "Choose a partition"
+msgstr "Valige partitsioon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM nimi?"
+msgid "Edit current rule"
+msgstr "Muuda praegust reeglit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new"
-msgstr "uus"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Vali olemasolev LVM, millele lisada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Ipv4 veidrate pakettide logimise lubamine/keelamine."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Vali olemasolev RAID, millele lisada"
+msgid "Please test the mouse"
+msgstr "Palun testige hiirt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving partition..."
-msgstr "Liigutan partitsiooni..."
+msgid "Other Media"
+msgstr "Muu andmekandja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "Paigutan 眉mber"
+msgid "Backup system files"
+msgstr "S眉steemsete failide varundamine"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Millisele sektorile soovite seda 眉mber paigutada?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Millisele kettale soovite seda 眉mber paigutada?"
+msgid "Qatar"
+msgstr "Katar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Liiguta"
+msgid "LDAP Base dn"
+msgstr "LDAPi alus dn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Uus suurus (MB): "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Seda paketti ei saa valida, sest paigalduseks napib kettaruumi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Valige uus suurus"
+msgid "generate auto-install floppy"
+msgstr "Loo kiirpaigaldusflopi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Muuda suurust"
+msgid "Dialing mode"
+msgstr "Valimisviis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s suuruse muutmisel h盲vivad sellel k玫ik andmed"
+msgid "File sharing"
+msgstr "Failide jagamine"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Selle partitsiooni andmetest v玫iks olla varukoopia"
+msgid "Clean /tmp at each boot"
+msgstr "Puhasta /tmp igal laadimisel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "See partitsioon ei ole muudetav"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Arvutan FAT failis眉steemi piire"
+msgid "Please choose your type of mouse."
+msgstr "Palun valige hiire t眉眉p."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kuhu soovite haakida %s?"
+msgid "class of hardware device"
+msgstr "riistvaralise seadme klass"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Seda haakepunkti ei saa eemaldada, sest partitsioon on kasutusel\n"
-"loopback-ina. Eemaldage esmalt loopback"
+"Nende masinate ja v玫rkude jaoks on selle arvuti k眉ljes olevad printerid "
+"k盲ttesaadavaks tehtud:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kuhu soovite haakida seadme %s?"
+msgid "United Kingdom"
+msgstr "Suurbritannia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kuhu soovite haakida loopback faili %s?"
+msgid "running"
+msgstr "t枚枚tab"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Ext2 vahetamine ext3 vastu"
+msgid "default"
+msgstr "tavaline"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Millist failis眉steemi soovite kasutada?"
+msgid "Indonesia"
+msgstr "Indoneesia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Muuda partitsiooni t眉眉pi"
+msgid "France [SECAM]"
+msgstr "Prantsusmaa [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "piiratud"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "vajalik"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s t眉眉bi muutmisel h盲vivad k玫ik seal olnud andmed"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS ei toeta printereid Novelli serveritel ega printereid, mis saadavad "
+"andmeid suvalise vormiga k盲skudena.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Kas eemaldada loopback fail?"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "K盲surida"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Uut partitsiooni ei saa luua\n"
-"(sest primaarseid partitsioone on juba maksimaalselt).\n"
-"Eemaldage k玫igepealt m玫ni primaarne partitsioon ja \n"
-"tekitage laiendatud partitsioon."
+"T盲isvaliku meie Linuxi lahendusi, samuti toodete eripakkumised ja muud "
+"\"soodustused\", leiate meie internetikaubamajast:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Eelistus: "
+msgid "access to administrative files"
+msgstr "ligip盲盲s administreerimisfailidele"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Algsektor: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Viga meili saatmisel.\n"
+" Raportimeili ei 玫nnestunud saata.\n"
+" Seadistage palun sendmail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Loo uus partitsioon"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", mitme funktsiooniga seade paralleelpordis \\#%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Kasuta loopback-ina"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Argumendid: (val)\n"
+"\n"
+"M盲盲rab shelli aegumise. Null t盲hendab aegumise puudumist."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modifitseeri RAIDi"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Eemalda LVMist"
+msgid "Automatic dependencies"
+msgstr "Automaats玫ltuvused"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Eemalda RAIDist"
+msgid "Swap"
+msgstr "Saaleala"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Lisa LVMi"
+msgid "Connecting to the Internet "
+msgstr "Interneti眉henduse loomine"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Lisa RAIDi"
+msgid "Restore Other"
+msgstr "Muu taastamine"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Vorminda"
+msgid "TV card"
+msgstr "TV kaart"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "脺ksikasjalik info"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT printserver"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Proovin p盲盲sta partitsioonitabelit"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Pange t眉hi flopi masinasse\n"
-"K玫ik andmed sellel h盲vivad"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Hoiatus"
+"Argumendid: (umask)\n"
+"\n"
+"M盲盲rab administraatori umask-i."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "Valige fail"
+msgid "Remove selected host/network"
+msgstr "Eemalda valitud masin/v玫rk"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"Tabeli varukoopia ei ole sama suurusega\n"
-"Kas ikkagi j盲tkata?"
+"Postfix on meili transpordiagent, see t盲hendab rakendus,\n"
+"mis toimetab meili 眉hest masinast teise."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Eemaldatava andmekandja automaatne haakimine"
+msgid "Disconnection from the Internet failed."
+msgstr "Interneti眉henduse katkestamine eba玫nnestus."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Laadi partitsioonitabel uuesti"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Siin saab valida klahvi v玫i klahvikombinatsiooni, mis laseb\n"
+"vahetada klaviatuuri (nt ladina ja mitte-ladina t盲hestikuga)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "P盲盲sta partitsioonitabel"
+msgid "Network Hotplugging"
+msgstr "V玫rgu kohene valmidus (hotplugging)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Taasta partitsioonitabel"
+msgid "if set to yes, reports check result to tty."
+msgstr "kui on 'jah', saadab kontrolli tulemused tty-sse."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Kirjuta partitsioonitabel"
+msgid "Restore From CD"
+msgstr "Taasta CD-lt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Et saada rohkem partitsioone, kustutage palun 眉ks, et luua laiendatud "
-"partitsioon"
+"N眉眉d on Teil v玫imalik seadistada oma arvutit Interneti眉hendust jagama.\n"
+"Selle v玫imaluse abil saavad teised Teie kohtv玫rgu arvutid kasutada selle "
+"masina Interneti眉hendust.\n"
+"\n"
+"Kontrollige enne j盲tkamist, et olete seadistanud oma v玫rgu/Interneti眉henduse "
+"drakconnecti abil.\n"
+"\n"
+"M盲rkus: kohtv玫rgu (LAN) jaoks on vajalik eraldi v玫rgukaardi olemasolu."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Partitsioone ei saa enam lisada"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Palun valige, millist v玫rguliidest soovite interneti眉henduse jaoks kasutada"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "K玫ik primaarsed partitsioonid on kasutusel"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Digifoto m盲lukaardi lugeja Teie HP mitmefunktsionaalsel seadmel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "K玫vaketta info"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Suurendage oma arvuti j玫udlust meie partnerite abiga, kes pakuvad Mandrake "
+"Linuxiga 眉hilduvaid professionaalseid rakendusi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Paiguta ise"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Interneti眉hendust n眉眉d enam ei jagata."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Kustuta k玫ik"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "kui on 'jah', kontrollib suid/sgid failide checksum-i."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Kas salvestada /etc/fstab muudatused"
+msgid "Latin American"
+msgstr "Ladina-Ameerika"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Kas v盲ljuda partitsioonitabelit salvestamata?"
+msgid "Japanese text printing mode"
+msgstr "Jaapani teksti tr眉kkimisresiim"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "V盲lju ilma salvestamata"
+msgid "Old device file"
+msgstr "Vana seadmefail"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Kas ikkagi j盲tkata?"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Tavakasutaja > Ekspert"
+msgid "Button `%s': %s"
+msgstr "Nupp '%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ekspert > Tavakasutaja"
+msgid "Please wait"
+msgstr "Palun oodake"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "Tagasi"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "V盲lju"
+msgid "None"
+msgstr "Puudub"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Valige partitsioon"
+msgid "The entered IP is not correct.\n"
+msgstr "Sisestatud IP aadress ei ole korrektne.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Valige muu partitsioon"
+msgid "Ethernet Card"
+msgstr "V玫rgukaart"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Muuda t眉眉pi"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Serverite otsing"
+msgid "Install"
+msgstr "Paigaldus"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Domeen"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Valige \"%s\", kui soovite kustutada k玫ik sellel kettal asuvad\n"
+"partitsioonid. Ettevaatust, p盲rast \"%s\" kl玫psamist ei ole enam\n"
+"v玫imalik sellelt kettalt andmeid taastada.\n"
+"\n"
+"Katkestamiseks valige \"%s\", mis katkestab tegevuse ilma andmeid\n"
+"ja k盲esoleval k玫vakettal olevaid partitsioone kustutamata."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Kasutajanimi"
+msgid "Exit install"
+msgstr "V盲lju programmist"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Palun sisestage sellele masinale ligip盲盲suks oma kasutajanimi, parool ja "
-"domeeni nimi."
+"K玫ik on seadistatud.\n"
+"N眉眉d saate Interneti眉hendust jagada teistele kohtv玫rgu arvutitele, kasutades "
+"neil automaatset konfigureerimist (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "N玫utav on domeeni autentimine"
+msgid "Remote CUPS server"
+msgstr "CUPS printserver"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "Veel 眉ks"
+msgid "Sun - Mouse"
+msgstr "Suni hiir"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Milline kasutajanimi"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Teil on vaid 眉ks seadistatud v玫rguliides:\n"
+"\n"
+"%s\n"
+"\n"
+"Kohtv玫rgu s盲tted seotakse selle liidesega."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Sisselogimine kasutajanimega %s eba玫nnestus (vale parool?)"
+msgid "Minimal install"
+msgstr "Minimaalne paigaldus"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Ethiopia"
+msgstr "Etioopia"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus kontrollerid"
+msgid "Devanagari"
+msgstr "Devanaagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "USB kontrollerid"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+" -pci seadmed: n盲itab PCI pesa, seadet ja kaardi funktsiooni\n"
+"- eide seadmed: seade on kas 眉lem v玫i allutatu\n"
+"- scsi seadmed: scsi siin ja scsi seadme id-d"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI kontrolerid"
+msgid "Total size: %d / %d MB"
+msgstr "Suurus kokku: %d / %d MB"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire kontrollerid"
+msgid "disabled"
+msgstr "keelatud"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontrollerid"
+msgid "Search for new scanners"
+msgstr "Uute sk盲nnerite otsimine..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Juhtkang"
+msgid "Disabling servers..."
+msgstr "Serverite peatamine..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Sk盲nner"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Valige palun varundamiste\n"
+"vaheline ajaline intervall"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Tundmatu/Muu"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s paigaldamine eba玫nnestus. Tekkis j盲rgmine viga:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Sillad ja kontrollerid"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "mkinitrd -f /boot/initrd-%s.img %s k盲ivitamine eba玫nnestus."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Olete valinud j盲rgmise(d) serveri(d): %s\n"
+"\n"
+"\n"
+"Need serverid aktiveeritakse vaikimisi. Pole k眉ll teada, et neil oleks\n"
+"turvaprobleeme, aga nende leidmine tulevikus pole sugugi v盲listatud.\n"
+"Kui peaks nii minema, kontrollige, et suudate uuenduse v玫imalikult\n"
+"ruttu hankida.\n"
+"\n"
+"\n"
+"Kas t玫esti paigaldada need serverid?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "V玫rgukaart"
+msgid "Network printer (TCP/Socket)"
+msgstr "V玫rguprinter (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Protsessorid"
+msgid "Backup User files..."
+msgstr "Kasutajafailide varundamine..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Veebikaamera"
+msgid "Install system"
+msgstr "S眉steemi paigaldus"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Helikaart"
+msgid "First DNS Server (optional)"
+msgstr "Esimene nimeserver (soovituslik)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Muud multimeediaseadmed"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "Soovi korral v玫ite ka sisendireal m盲盲rata seadmenime/failinime"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "TV-kaart"
+msgid "dhcpd Config..."
+msgstr "Dhcpd seadistamine..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Graafikakaart"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Interneti眉henduse jagamine on juba seadistatud, aga hetkel keelatud."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "Lint"
+msgid "LILO/grub Installation"
+msgstr "LiLo/grub paigaldamine"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Iisraeli"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD kirjutajad"
+msgid "load setting"
+msgstr "koormuse s盲tted"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CD-ROM"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Printer \"%s\" serveril \"%s\""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Ketas"
+msgid "Floppy can be removed now"
+msgstr "Flopi v玫ib n眉眉d v盲lja v玫tta"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Truly minimal install"
+msgstr "T玫eliselt minimaalne paigaldus"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Flopi"
+msgid "Denmark"
+msgstr "Taani"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Suvalise juhtprogrammi valimine"
+msgid "Moving partition..."
+msgstr "Liigutan partitsiooni..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Juhtprogramm: "
+msgid "(This) DHCP Server IP"
+msgstr "(Selle) DHCP serveri IP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Kui Te t玫esti arvate, et teate, milline juhtprogramm Teie helikaardile\n"
-"tegelikult sobib, v玫ite valida selle 眉laltoodud nimekirjast.\n"
-"\n"
-"Teie praegune helikaart \"%s\" kasutab juhtprogrammi \"%s\" "
+msgid "Test of the configuration"
+msgstr "Proovime seadistusi"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Suvalise juhtprogrammi valimine"
+msgid "Installing %s ..."
+msgstr "%s paigaldamine..."
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Klassikaline v玫imalus Teie arvuti heliprobleeme kindlaks teha on k盲ivitada "
-"j盲rgmised k盲sud:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" n盲itab, millist draiverit Teie\n"
-"helikaart vaikimisi kasutab\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" n盲itab, millist draiverit\n"
-"praegu kasutatakse\n"
+"S玫ltuvalt sellest, kas valisite individuaalse pakettide valiku v玫i mitte,\n"
+"n盲idatakse Teile gruppidesse ja alamgruppidesse r眉hmitatult k玫iki pakette\n"
+"sisaldavat puud. Seda m枚枚da liikudes v玫ite valida v玫i etteantud valiku\n"
+"t眉histada tervete gruppide, alamgruppide v玫i 眉ksikute pakettide kaupa.\n"
"\n"
-"- \"/sbin/lsmod\" n盲itab, kas vastav moodul (draiver) on hetkel laetud\n"
+"Kui valite puus m玫ne paketi, ilmub paremal selle kirjeldus, mis annab\n"
+"teada, milline on paketi 眉lesanne.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" ja \"/sbin/chkconfig --list alsa\"\n"
-"n盲itavad, kas teenused \"sound\" ja \"alsa\" k盲ivituvad.\n"
+"!! Kui tahtlikult v玫i seet玫ttu, et asi kuulus gruppi, on valitud m玫ni "
+"serveripakett,\n"
+"palutakse Teilt kinnitust, et Te ikka t玫esti soovite neid servereid "
+"paigaldada.\n"
+"Mandrake Linuxi puhul k盲ivitatakse k玫ik paigaldatud serverid vaikimisi\n"
+"alglaadimise k盲igus. Isegi kui nad olid turvalised ja teadaolevalt "
+"probleemivabad\n"
+"ajal, mis valmis distributsioon, v玫ib kergesti juhtuda, et p盲rast Mandrake "
+"Linuxi\n"
+"praeguse versiooni valmimist leiti neist turvaauke. Kui Te ei tea, mida "
+"konkreetne\n"
+"teenus pakub v玫i miks see 眉ldse paigaldatakse, kl玫psake nupul \"%s\", sest\n"
+"kl玫ps nupul \"%s\" paigaldab loetletud serverid ning nad k盲ivituvad\n"
+"alglaadimise ajal automaatselt. !!\n"
"\n"
-"- \"aumix -q\" n盲itab, kas heli pole mitte summutatud (M - mute)\n"
+"Lisav玫imalus \"%s\" lihtsalt keelab hoiatava dialoogi, mis ilmub\n"
+"alati, kui paigaldaja valib automaatselt m玫ne paketi. See juhtub siis, kui "
+"leitakse,\n"
+"et paigalduse edukaks l玫petamiseks on vajalik paigaldada veel m玫ni muu "
+"pakett.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" n盲itab, milline programm hetkel\n"
-"helikaarti kasutab.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Heliprobleemide lahendamine"
+"V盲ike flopiketta ikoon loendi all v玫imaldab avada eelmise paigalduse ajal "
+"valitud\n"
+"pakettide nimekirja. Sellel kl玫psamise j盲rel palutakse Teil sisestada "
+"flopiketas,\n"
+"mille l玫ite eelmise paigalduse l玫pul. Vaadake ka eelmise sammu teist "
+"n玫uannet\n"
+"selle kohta, kuidas sellist flopiketast luua."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Viga: helikaardi juhtprogramm \"%s\" ei ole loendis"
+msgid "Choose your filesystem encryption key"
+msgstr "Valige failis眉steemi kr眉ptov玫ti"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unkown driver"
-msgstr "Tundmatu juhtprogramm"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"Valige palun CD/DVD-seade.\n"
+"(Vajutage Enter s盲tete levitamiseks teistele v盲ljadele.\n"
+"See v盲li ei ole kohustuslik, ainult vahend vormi t盲itmiseks.)"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Teie helikaardile (%s) ei 玫nnestunud tuvastada juhtprogrammi"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Juhtprogrammi ei 玫nnestunud tuvastada"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Pole teada 眉htegi vabavara-juhtprogrammi Teie helikaardile (%s), kuid on "
-"olemas tootja juhtprogramm, mille asukoht on \"%s\"."
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Vabavara-juhtprogramm puudub"
+msgid "(default value: %s)"
+msgstr "(vaikev盲盲rtus: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Palun oodake... Rakendan seadistusi"
+msgid "Alternative test page (Letter)"
+msgstr "Alternatiivne testlehek眉lg (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Vana \"%s\" juhtprogramm on mustas nimekirjas.\n"
+"DHCP serveri s盲tted.\n"
"\n"
-"On teatatud, et see tekitab mahalaadimisel kernelile jama.\n"
+"Siin saab valida erinevaid v玫imalusi DHCP serveri seadistustele.\n"
+"Kui te ei tea m玫ne valiku t盲hendust, j盲tke see puutumata.\n"
"\n"
-"Uut \"%s\" juhtprogrammi kasutatakse j盲rgmisel alglaadimisel."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Probleemi otsimine"
+msgid "Choose an X server"
+msgstr "Valige X server"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Saaleala suurus (MB): "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) oli esimene heli-API. See on op-s眉steemist s玫ltumatu "
-"heli-API (saadaval enamiku unix-s眉steemide tarbeks), kuid samas v盲ga "
-"elementaarne ja piiratud.\n"
-"Ja pealegi kipuvad OSS-draiverid kogu aeg jalgratast uuesti leiutama.\n"
-"\n"
-"ALSA (Advandes Linux Sound Architecture) kujutab endast moodulistatud\n"
-"arhitektuuri, mis toetab p盲ris suurt hulka ISA-, USB- ja PCI-kaarte.\n"
-"\n"
-"See pakub ka palju arenenumat API-t kui OSS.\n"
-"\n"
-"Alsa kasutamiseks v玫ib tarvitada:\n"
-" -vana 眉hilduvat OSS API-t\n"
-"- uut ALSA API-t, mis pakub hulga t盲iustatud v玫imalusi, kuid\n"
-"n玫uab ALSA teegi kasutamist.\n"
+"Muud (mitte drakbackupi)\n"
+"v玫tmed on juba paigas"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Varukoopiaga v玫rreldes pole mingeid muutusi!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Vormindatud\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Paigalduse t眉眉p"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Printer \"%s\" SMB/Windows serveril \"%s\""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Teie helikaart kasutab praegu %s\"%s\" juhtprogrammi (selle kaardi "
-"vaikedraiver on \"%s\")"
+"- deemon (%s) sisaldab:\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d komaga eraldatud numbrit"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Siin saate valida alternatiivse juhtprogrammi (OSS v玫i ALSA) oma "
-"helikaardile (%s)."
+"Protokoll rusers laseb 眉le v玫rgu saada informatsiooni\n"
+"s眉steemi kasutajate kohta. Ettevaatust!"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Heliseadistused"
+msgid "Automatic Steps Configuration"
+msgstr "Automaatsete sammude seadistamine"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Pole teada 眉htegi alternatiivset OSS/ALSA juhtprogrammi Teie helikaardile (%"
-"s), millel praegu on kasutusel \"%s\""
+"Kas soovite avatud tarkvara kogukonnast rohkem teada saada? Liituge vaba "
+"tarkvara maailmaga!"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Alternatiivne juhtprogramm puudub"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "raadiotoe lubamine"
+msgid "Please select data to backup..."
+msgstr "Valige palun varundamiseks andmed..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Raadiotugi:"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"脺henduse loomine eba玫nnestus.\n"
+"Kontrollige palun s盲tteid Mandrake juhtimiskeskuse abil."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL:"
+msgid "received"
+msgstr "saadud"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "h玫ivatavate puhvrite arv mmap-i jaoks"
+msgid "/File/_New"
+msgstr "/Fail/_Uus"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "H玫ivepuhvrite arv:"
+msgid "The DNS Server IP"
+msgstr "Nimeserveri IP"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Tuuneri t眉眉p:"
+msgid "IP Range End:"
+msgstr "IP vahemiku l玫pp:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Kaardi mudel:"
+msgid "High"
+msgstr "K玫rge"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Enamiku moodsate TV-kaartide puhul avastab GNU/Linuxi kerneli bttv-moodul "
-"automaatselt 玫iged parameetrid.\n"
-"Kui kaart siiski valesti tuvastati, v玫ite siin m盲盲rata 玫ige tuuneri ja "
-"kaardi t眉眉bi. Valige vajadusel korral sobivad tv-kaardi parameetrid"
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "See v盲li kirjeldab seadet"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Tundmatu|Tavaline"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Printeri lisamine StarOffice/OpenOffice.org/GIMP-ile"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Tundmatu|CPH06X (bt878) [paljud tootjad]"
+msgid "Local Printers"
+msgstr "Kohalikud printerid"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Tundmatu|CPH05X (bt878) [paljud tootjad]"
+msgid "Installation image directory"
+msgstr "Paigalduslaadefaili kataloog"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Automaattuvastus"
+msgid "NIS Server"
+msgstr "NIS server"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Tee 盲ra"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Teie valik? (vaikimisi %s)"
+msgid "Spain"
+msgstr "Hispaania"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Halb valik, proovige palun uuesti\n"
+msgid "This user name has already been added"
+msgstr "See kasutajanimi on juba lisatud"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Uuestisaatmine"
+msgid "Choose a file"
+msgstr "Valige fail"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Pange t盲hele, et pealdis on muutunud:\n"
-"%s"
+msgid "Apply"
+msgstr "Rakenda"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Valige palun esimene number k眉mnesest vahemikust, mida soovite\n"
-"muuta, v玫i vajutage Enter j盲tkamiseks.\n"
-"Ja Teie valik on? "
+msgid "Auto-detect available ports"
+msgstr "K盲ttesaadavate portide automaattuvastus"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> N眉眉d on Teil mitmeid valikuid (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Interneti眉hendust hetkel ei jagata"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Teie valik? (vaikimisi '%s'%s)"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " kirjutage t眉hja kirje puhul 'void'"
+msgid "Belgium"
+msgstr "Belgia"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Kas soovite sellel nupul kl玫psata?"
+msgid "Kuwait"
+msgstr "Kuveit"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Nupp '%s': %s"
+msgid "Choose the window manager to run:"
+msgstr "Valige palun k盲ivitatav aknahaldur:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "CPU alamp玫lvkond"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Teie valik? (0/1, vaikimisi '%s')"
+msgid "First Time Wizard"
+msgstr "Esimese korra n玫ustaja"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Teil tuleb t盲ita kirjed:\n"
-"%s"
+"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
+"J盲tkake omal vastutusel."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Mooduli %s laadimine ei 玫nnestunud.\n"
-"Kas soovite proovida parameetreid muuta?"
+msgid "please wait, parsing file: %s"
+msgstr "palun oodake, anal眉眉sin faili: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "M盲盲rata parameetrid"
+msgid "Taiwan"
+msgstr "Taiwan"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Proovida niisama"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"M玫nel juhul vajab %s juhtprogramm t枚枚ks lisainformatsiooni,\n"
-"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
-"m盲盲rata v玫i lasta juhtprogrammil ise Teie arvutit kompida? V玫ib juhtuda,\n"
-"et see viib arvuti segadusse, kuid ei tohiks mingit j盲盲vat kahju teha."
+"Tr眉kkimiseks Lexmarki inkjetil antud seadistusega l盲heb Teil tarvis Lexmarki "
+"pakutavaid inkjet printeri draivereid (http://www.lexmark.com/). Kl玫psake "
+"viidal \"Drivers\". Seej盲rel valige oma mudel ja seej盲rel "
+"operatsioonis眉steem \"Linux\". Draiverid on kas RPM-paketid v玫i "
+"shelliskriptid interaktiivse graafilise paigalduse v玫imalusega. Te ei pruugi "
+"seda seadistust sooritada graafiliste kasutajaliideste abil. Katkestage kohe "
+"p盲rast litsentsilepinguga n玫ustumist. Seej盲rel tr眉kkige \"lexmarkmaintain\" "
+"abil printeripea joondamise lehek眉ljed ning kohandage selle rakenduse abil "
+"pea joondamise s盲tteid."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Millist %s juhtprogrammi peaksime proovima?"
+msgid "Permissions"
+msgstr "Loabitid"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Mooduli parameetrid:"
+msgid "Provider name (ex provider.net)"
+msgstr "Teenusepakkuja tunnus (n盲iteks minuisp.ee)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"N眉眉d v玫ite moodulile %s parameetreid m盲盲rata.\n"
-"Parameetrid on vormingus \"nimi=v盲盲rtus nimi2=v盲盲rtus2 ...\".\n"
-"N盲iteks: \"io=0x300 irq=7\""
+msgid "Version: %s\n"
+msgstr "Versioon: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"N眉眉d v玫ite m盲盲rata oma parameetrid moodulile %s.\n"
-"Pange t盲hele, et iga aadress tuleb sisestada prefiksiga 0x, nt '0x123'"
+"Teie s眉steemil napib ressurse ja paigaldamine v玫ib eba玫nnestuda.\n"
+"Kui nii juhtub, proovige palun tekstip玫hist paigaldust. Selleks\n"
+"vajutage CDROMilt laadimisel F1 ja sisestage 'text'"
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(moodul %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Kasuta Windowsi partitsiooni loopbackina"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Paigaldame juhtprogrammi %s kaardile %s"
+msgid "Armenian (typewriter)"
+msgstr "Armeenia (tr眉kimasin)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Info riistvara kohta"
+msgid "Connection type: "
+msgstr "脺henduse t眉眉p: "
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Kas Teil on ikka m玫ni %s liides?"
+msgid "Graphical interface"
+msgstr "Graafiline kasutajaliides"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "On Teil veel kaarte?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s koos 3D graafikakiirendi toega"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Leiti %s %s liidest"
+msgid "India"
+msgstr "India"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Siin saab seadistada mooduli k玫iki parameetreid."
+msgid "Chad"
+msgstr "T拧aad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "komaga eraldatud stringi"
+msgid "Slovakia"
+msgstr "Slovakkia"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "komaga eraldatud numbrit"
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d komaga eraldatud stringi"
+msgid "Cambodia"
+msgstr "Kambod啪a"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d komaga eraldatud numbrit"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Realaotussagedus: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "number"
+msgid "Path"
+msgstr "Asukoht"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Selleks vajate Alcateli Microcode-i.\n"
-"Seda saate alla laadida v玫rgust\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"ja saadud 'mgmt.o' kopeerige kataloogi /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr "Siin saate m盲盲rata printeri asemele suvalise k盲surea."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"K玫ige tavalisem 眉hendusviis ADSL jaoks on pppoe.\n"
-"M玫nel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
-"Kui Te ei tea, kasutage pppoe-d"
+"Tr眉kkimiss眉steemi (%s) ei k盲ivitata automaatselt arvuti alglaadimisel.\n"
+"\n"
+"On v玫imalik, et automaatk盲ivitus l眉litati v盲lja seoses k玫rgema turvataseme "
+"valikuga, sest tr眉kkimiss眉steem on v玫imaliku r眉nnaku objekt.\n"
+"\n"
+"Kas soovite tr眉kkimiss眉steemi automaatk盲ivituse taas sisse l眉litada?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Loo interneti眉hendus"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Printer %s\n"
+"Mida soovite muuta?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (pppoa vahendusel) usb"
+msgid "Add host"
+msgstr "Lisa masin"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Kui Te t玫esti arvate, et teate, milline juhtprogramm Teie helikaardile\n"
+"tegelikult sobib, v玫ite valida selle 眉laltoodud nimekirjast.\n"
+"\n"
+"Teie praegune helikaart \"%s\" kasutab juhtprogrammi \"%s\" "
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "dhcp"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Kas lubada kasutajatel jagada m玫ningaid oma katalooge?\n"
+"Lubamine v玫imaldab kasutajal seda teha lihtsalt kl玫psuga sildil \"Jaga\" "
+"Konqueroris ja Nautiluses.\n"
+"\n"
+"\"Isetehtud\" lubab m盲盲rata seda kasutajate kaupa.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "pptp"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Valige palun paketivaliku laadimine v玫i salvestamine flopil(t).\n"
+"Vorming on sama, mis automaatpaigaldusega loodud flopide puhul."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "pppoe"
+msgid "China (broadcast)"
+msgstr "Hiina (tele)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Muud pordid"
+msgid "Use quota for backup files."
+msgstr "Kvootide kasutamine varukoopiafailidel."
-#
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "K玫ik (tulem眉眉r puudub)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Printeri \"%s\" seadistamine..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"M盲盲rati vale port: %s\n"
-"脮ige m盲盲rang on \"port/tcp\" v玫i \"port/udp\", \n"
-"kus port on number 1 ja 65535 vahel."
+msgid "Internet connection"
+msgstr "Interneti眉hendus"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Sisestada v玫ib mitmesuguseid porte. \n"
-"Sobivad n盲iteks: 139/tcp 139/udp.\n"
-"Vaadake l盲hemalt /etc/services."
+"Mooduli %s laadimine ei 玫nnestunud.\n"
+"Kas soovite proovida parameetreid muuta?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Millistel teenustel soovite lubada kasutada Interneti眉hendust?"
+msgid "Welcome to the Open Source world."
+msgstr "Tere tulemast avatud tarkvara maailma"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewalli seadistaja\n"
-"\n"
-"Kontrollige enne j盲tkamist, et olete seadistanud p盲盲su v玫rku/Internetti\n"
-"drakconnecti abil."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia ja Hertsegoviina"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"drakfirewalli seadistaja\n"
-"\n"
-"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
-"Kui vajate v玫imsat tulem眉眉ri, vaadake palun\n"
-"spetsiaalset MandrakeSecurity Firewall distributsiooni."
+"See haakepunkt vajab t玫elist (ext2/ext3, reiserfs, xfs v玫i jfs) "
+"failis眉steemi\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "V玫rgukaart puudub"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Sisestage palun masinanimi v玫i IP aadress.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP ja IMAP server"
+msgid "Netherlands"
+msgstr "Holland"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Failide saatmine..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Meiliserver"
+msgid "Internal ISDN card"
+msgstr "Sisemine ISDN kaart"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Nimeserver"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Pole teada 眉htegi alternatiivset OSS/ALSA juhtprogrammi Teie helikaardile (%"
+"s), millel praegu on kasutusel \"%s\""
-#: ../../network/drakfirewall.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Veebiserver"
+msgid "Title"
+msgstr "Tiitel"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconfi masina nimi ei tohi sisaldada punkti (.)"
+msgid "Install & convert Fonts"
+msgstr "Fontide paigaldamine ja teisendamine"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host name"
-msgstr "Masinanimi"
+msgid "WARNING"
+msgstr "HOIATUS"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zefoconf masina nimi"
+msgid "Installing bootloader"
+msgstr "Alglaaduri paigaldamine"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Sisestage Zeroconfi masina nimi (ilma punktideta), kui Te\n"
-"ei soovi kasutada vaikimisi antud masina nime."
+msgid "replay"
+msgstr "korda"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "V玫rguseadistused"
+msgid "detected %s"
+msgstr "tuvastati %s"
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Palun valige, millist v玫rguliidest soovite interneti眉henduse jaoks kasutada"
+msgid "Virgin Islands (U.S.)"
+msgstr "Neitsisaared (USA)"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Valige v玫rguliides"
+msgid "Bad backup file"
+msgstr "K玫lbmatu varukoopia"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"脺htegi v玫rgukaarti ei 玫nnestunud tuvastada\n"
-"Seega ei saa ka sellist 眉hendust seadistada."
+"Interneti眉henduse jagamine on juba seadistatud,\n"
+"aga hetkel on see keelatud.\n"
+"\n"
+"Mida soovite ette v玫tta?"
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Millist DHCP klienti soovite kasutada?\n"
-"Vaikimisi on selleks 'dhcp-client'"
+"Sisestage serveri IP aadress ja port, mille printereid soovite kasutada."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kaarti ei leitud. Palun valige see j盲rgmisel sammul."
+msgid "Pipe into command"
+msgstr "T枚枚 toru kaudu k盲suks"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"Leiti k眉ll PCI ISDN kaart, kuid selle t眉眉p on tundmatu. Palun valige PCI "
-"kaart j盲rgmisel sammul."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Milline on Teie ISDN kaart?"
+"Osa Teie riistvarast n玫uab tarnijapoolseid draivereid.\n"
+"Infot nende kohta saate: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN s盲tted"
+msgid "Detecting devices..."
+msgstr "Otsin seadmeid..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Loobu"
+msgid "Click here to launch the wizard ->"
+msgstr "Kl玫psake siia n玫ustaja k盲ivitamiseks ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "J盲tka"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"V盲ljade kirjeldus:\n"
"\n"
-"Kui Teil on ISA kaart, siis peaks j盲rgmised v盲盲rtused olema 玫iged.\n"
-"\n"
-"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
-"v盲盲rtusi.\n"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ei tea"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "protsessori (CPU) nimi"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Printeri andmete v盲rskendamine..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Millist t眉眉pi kaart Teil on?"
+msgid "You must also format %s"
+msgstr "Vormindada tuleb ka %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Leiti \"%s\" liides, kas soovite seda kasutada?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Vaadake ette: see v玫ib olla ohtlik."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Millist protokolli soovite kasutada?"
+msgid "Insert a floppy containing package selection"
+msgstr "Sisestage palun paketivalikut sisaldav flopi"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll 眉lej盲盲nud maailma tarbeks"
+msgid "Server: "
+msgstr "Server: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokoll 眉lej盲盲nud maailma tarbeks\n"
-"Ilma D-kanalita (liisitud liinid)"
+msgid "Security Alerts:"
+msgstr "Turvahoiatused:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Euroopa protokoll"
+msgid "Sweden"
+msgstr "Rootsi"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Euroopa protokoll (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Expecti kasutamine SSH jaoks"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Valige oma teenusepakkuja.\n"
-"Kui see ei ole nimekirjas, valige 'Tundmatu'."
+msgid "Poland"
+msgstr "Poola"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "V盲line ISDN modem"
+msgid "Importance: %s\n"
+msgstr "T盲htsus: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Sisemine ISDN kaart"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "M盲rkige palun, kui soovite p盲rast varundamist lindi v盲ljastamist."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Millist ISDN 眉hendust kasutate?"
+msgid "Other ports"
+msgstr "Muud pordid"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "V玫rguseadistuste n玫ustaja"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "h玫ivatavate puhvrite arv mmap-i jaoks"
-#
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Vana seadistus (isdn4net)"
+msgid "SMBus controllers"
+msgstr "SMBus kontrollerid"
-#
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Uus seadistus (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "脺henduse aegumine (sekundites)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Millist ISDN seadistust eelistate?\n"
-"\n"
-"* Vana seadistus kasutab isdn4net-i. Sellel on v玫imsaid\n"
-" vahendeid, kuid seadistamine on keerukas ja mittestandardne.\n"
-"\n"
-"* Uus seadistus on h玫lpsamini m玫istetav, vastab paremini\n"
-" standarditele, kuid pakub v盲hem t枚枚riistu.\n"
-"\n"
-"Meie soovitus on kasutada light-seadistust.\n"
+"M玫ned varasemad i486DX-100 kiibid ei suutnud korralikult naasta t枚枚resiimi, "
+"kui oli kasutatud k盲sklust \"seiska\" (\"halt\")"
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "脛ra tee midagi"
+msgid "Croatian"
+msgstr "Horvaadi"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Paigalda RPM"
+msgid "Use existing partition"
+msgstr "Kasuta olemasolevat partitsiooni"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"Leiti \"%s\" kiibil p玫hinev \"winmodem\". Kas paigaldada vajalik tarkvara?"
+msgid "Unable to contact mirror %s"
+msgstr "脺hendust peegliga %s ei saadud"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Title"
-msgstr "Tiitel"
+msgid "/Help/_About..."
+msgstr "/Abi/_Misv盲rk"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Teie modem ei ole toetatud.\n"
-"Ehk saate abi aadressilt http://www.linmodems.org"
+msgid "Remove user directories before restore."
+msgstr "Kasutaja kataloogide eemaldamine enne taastamist."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Teine nimeserver (soovituslik)"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Kavatsesite hakata seadistama v玫rguprinterit. Selleks l盲heb vaja t枚枚tavat "
+"v玫rgu眉hendust, aga Teil on v玫rk veel seadistamata. Kui Te j盲tkate ilma v玫rku "
+"seadistamata, et ole Teil v玫imalik kasutada printerit, mida te tahate "
+"seadistada. Kuidas peaks n眉眉d edasi talitama?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Esimene nimeserver (soovituslik)"
+msgid "CUPS printer configuration"
+msgstr "CUPS printeri s盲tted"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Domeeninimi"
+msgid "could not find any font in your mounted partitions"
+msgstr "ei suutnud haagitud partitsioonidel leida 眉htegi fonti"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "F00f viga"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Skriptip玫hine"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminalip玫hine"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Millist DHCP klienti soovite kasutada?\n"
+"Vaikimisi on selleks 'dhcp-client'"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Domeeninimi:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Kasutajakonto"
+msgid "On Floppy"
+msgstr "Flopil"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Sissehelistamiskeskuse number"
+msgid "Restore"
+msgstr "Taastamine"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "脺henduse nimi"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr "kui on 'jah', kontrollib, kas v玫rguseadmed on mitte-eelisresiimis."
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "DialUp parameetrid"
+msgid "Looking for available packages..."
+msgstr "Otsin saadaolevaid pakette..."
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Millisesse jadaporti on Teie modem 眉hendatud?"
+msgid "Init Message"
+msgstr "Initsialiseerimisteade"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "V玫rgu s盲tted"
+msgid "Rescue partition table"
+msgstr "P盲盲sta partitsioonitabel"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Seadistamisel esines probleeme.\n"
-"Kontrollige oma 眉hendust net_monitor v玫i mcc abil. Kui 眉hendus ei t枚枚ta, "
-"tuleks see uuesti seadistada."
+msgid "Connection complete."
+msgstr "脺hendus on loodud."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Soovitame taask盲ivitada ka X keskkonna, et v盲ltida v玫imalikke\n"
-"masinanime muutmisest tingitud probleeme."
+msgid "Cyprus"
+msgstr "K眉pros"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"脮nnitleme, v玫rk ja interneti眉hendus on seadistatud.\n"
-"S盲tted salvestatakse n眉眉d.\n"
-"\n"
+msgid "Remove from RAID"
+msgstr "Eemalda RAIDist"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"V玫rgu taask盲ivitamisel tekkis viga: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "See kr眉ptov玫ti on liiga lihtne (peaks olema v盲hemalt %d m盲rki)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "V玫rk tuleb uuesti k盲ivitada. Kas soovite seda teha?"
+msgid "Configuration Wizards"
+msgstr "Seadistamise n玫ustajad"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "V玫rgus盲tted"
+msgid "ISDN connection"
+msgstr "ISDN 眉hendus"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Kas soovite luua 眉henduse juba alglaadimisel?"
+msgid "primary"
+msgstr "esmane"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Interneti眉hendus"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " SMB/Windowsi serveril \"%s\", jagatud printer \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Olete seadistanud mitu v玫imalust Internetiga 眉hendumiseks.\n"
-"Valige palun see, mida soovite kasutada.\n"
+"N眉眉d saate valida, millised teenused peaks k盲ivitama alglaadimisel.\n"
"\n"
+"Siin on 眉les loetud k玫ik teenused, mis on saadaval antud paigalduse puhul.\n"
+"Uurige neid hoolega ja j盲tke valimata k玫ik, mida ei ole alglaadimise ajal\n"
+"tingimata vajalik k盲ivitada.\n"
+"\n"
+"Konkreetset teenust valides n盲ete selle kohta l眉hikest seletavat teksti. "
+"Kui\n"
+"Te ei ole aga kindel, kas teenus on kasulik v玫i mitte, on m玫istlik j盲tta "
+"kehtima\n"
+"vaikevalik (olgu see siis lubav v玫i mitte).\n"
+"\n"
+"!! Kui kavatsete oma s眉steemi kasutada serverina, olge eriti t盲helepanelik:\n"
+"t玫en盲oliselt ei soovi Te k盲ivitada mittevajalikke teenuseid. Pidage meeles, "
+"et\n"
+"m玫ned teenused v玫ivad serveril kasutatuna olla isegi ohtlikud. 脺ldiselt "
+"tasub\n"
+"valida ainult neid teenuseid, mida Teil t玫esti vaja l盲heb.\n"
+"!!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Valige 眉hendus, mida seadistada"
+msgid "Skip"
+msgstr "J盲ta vahele"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "v玫rgukaart(i) leiti 眉les"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "LAN 眉hendus"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr "Aktiveerib s眉steemi alglaadimisel k玫ik vajalikud v玫rguliidesed."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "leiti kaabli眉hendus"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"CPU sagedus megahertsides (seda v玫ib ligil盲hedaselt samastada operatsioonide "
+"arvuga, mida CPU suudab sekundis sooritada)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Kaabli眉hendus"
+msgid "important"
+msgstr "t盲htis"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "tuvastati"
+msgid "Total Progress"
+msgstr "Edenemine kokku"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL 眉hendus"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"Esmalt otsib DrakX 眉les k玫ik Teie arvuti IDE-seadmed, p眉眉des samal ajal\n"
+"tuvastada ka PCI siini SCSI-liideseid. Kui viimaseid leitakse ja vastav(ad)\n"
+"draiver(id) on teada, siis laetakse ja paigaldatakse k玫ik vajalik "
+"automaatselt.\n"
+"\n"
+"Riistvara tuvastamine ei pruugi alati siiski 玫nnestuda ja kui see nii "
+"peaks \n"
+"minema, palub DrakX Teil teatada, kas masinas on m玫ni PCI SCSI-liides.\n"
+"\n"
+"Kui peate oma adapteri k盲sitsi m盲盲rama, k眉sib DrakX, kas soovite m盲盲rata\n"
+"ka selle parameetrid. Siin oleks m玫tet lasta tegutseda DrakX-l, mis proovib\n"
+"j盲rele liidese spetsiifilised omadused, mida see initsialiseerimiseks "
+"vajab.\n"
+"Tavaliselt 玫nnestub see edukalt.\n"
+"\n"
+"Kui automaatne parameetrite otsimine ei t枚枚ta, tuleb liides k盲sitsi "
+"seadistada.\n"
+"Selleks tutvuge palun l盲hemalt oma SCSI liidese dokumentatsiooniga\n"
+"v玫i k眉sige abi riistvara m眉眉jalt."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "tuvastati %s"
+msgid "Users"
+msgstr "Kasutajad"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN 眉hendus"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "脺hendus \"Winmodemiga\""
+msgid "Preparing bootloader..."
+msgstr "Alglaaduri ettevalmistamine..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "leiti pordis %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Vaikel眉眉s (nt %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Tavaline modemi眉hendus"
+msgid "The passwords do not match"
+msgstr "Salas玫nad ei klapi"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Otsin seadmeid..."
+msgid "Examples for correct IPs:\n"
+msgstr "Korrektne IP aadress on n盲iteks:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Ekspertresiim"
+msgid "Frequency (MHz)"
+msgstr "Sagedus (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Kasuta automaattuvastust"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Selle paketivaliku kasutamiseks alustage paigaldamist k盲suga \"linux "
+"defcfg=floppy\""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Valige profiil, mida seadistada"
+msgid "the number of the processor"
+msgstr "protsessori number"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Interneti眉henduse n玫ustaja\n"
-"\n"
-"N眉眉d hakkame interneti眉hendust seadistama.\n"
-"Kui Te ei soovi automaatset tuvastamist, siis j盲tke see m盲rkimata.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Arvuti sisekell on seatud GMT ajale"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"V玫rgu眉hendus on juba seadistatud, sest installitakse ju v玫rgust.\n"
-"Kui soovite neid seadistusi s盲ilitada, valige Olgu, muidu katkestage ja "
-"saate seadistada uuesti.\n"
+msgid "Give a file name"
+msgstr "Failinimi"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"N眉眉d on aeg seadistada %s 眉hendus.\n"
-"\n"
-"\n"
-"Vajutage j盲tkamiseks Olgu."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Valige palun port, kuhu Teie printer on 眉hendatud."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "N眉眉d on aeg seadistada %s 眉hendus."
+msgid "Change Cd-Rom"
+msgstr "Vahetage CD-ROM"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Interneti眉henduse seadistamine"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Muutvarunduse kasutamine (vanu varukoopiaid ei asendata)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "脺henduse seadistamine"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Teie helikaardile (%s) ei 玫nnestunud tuvastada juhtprogrammi"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Katkesta 眉hendus"
+msgid "force"
+msgstr "sunni peale"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "脺henda"
+msgid "Exit"
+msgstr "V盲lju"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Saate seadistada 眉henduse uuesti."
+"M脛RKUS: S玫ltuvalt printeri mudelist ja tr眉kkimiss眉steemist paigaldatakse "
+"kuni %d MB lisatarkvara."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Saate 眉henduda Internetti v玫i seadistada 眉hendus uuesti."
+"脺htegi liidest ei ole seadistatud.\n"
+"Esmalt tuleb need seadistada, kl玫psake selleks nupul 'Seadista'"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Hetkel ei ole Te Internetti 眉hendatud."
+msgid "Estonian"
+msgstr "Eesti"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"\n"
-"Saate 眉henduse katkestada v玫i uuesti seadistada."
+"Apache on maailma juhtiv veebiserveri programm. T玫en盲oliselt\n"
+"ka v玫imsaim."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Hetkel olete Internetti 眉hendatud."
+msgid "Add/Del Clients"
+msgstr "Lisa/kustuta klient"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URLi alguses peab olema 'ftp:' v玫i 'http:'"
+msgid "Choose the network interface"
+msgstr "Valige v玫rguliides"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Vahendaja peab olema kujul http://..."
+msgid "Unknown Model"
+msgstr "Tundmatu mudel"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP vahendaja"
+msgid "CD/DVD burners"
+msgstr "CD/DVD kirjutajad"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP vahendaja"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partitsioonilt toimub alglaadimine\n"
+" (MS-DOS-i, mitte lilo jaoks)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Vahendajate s盲tted"
+msgid "choose image"
+msgstr "valige pilt"
-#: ../../network/network.pm:1
+#
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "L眉眉si aadress peab olema kujul 1.2.3.4"
+msgid "Firewalling configuration detected!"
+msgstr "Leitud tulem眉眉ri s盲tted!"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Nimeserveri aadress peab olema kujul 1.2.3.4"
+msgid "Connection name"
+msgstr "脺henduse nimi"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway device"
-msgstr "L眉眉sipoolne seade"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"tekstikasti x-koordinaat\n"
+"arvulises v盲ljenduses"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Vaikel眉眉s (nt %s)"
+msgid "Updating package selection"
+msgstr "Paketivaliku uuendamine"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Nimeserver"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Kuhu soovite haakida loopback faili %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Masina nimi peab olema esitatud t盲iskujul,\n"
-"n盲iteks ``minumasin.minufirma.ee''.\n"
-"Kui Teil on vaikel眉眉s, siis sisestage ka selle IP aadress"
+"Flopi on edukalt loodud.\n"
+"N眉眉d v玫ite vajadusel paigaldust korrata."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Kiirus peab sisaldama sufiksit k, M v玫i G (n盲iteks \"11M\"), v玫i lisage "
-"piisavalt nulle."
+msgid "the number of buttons the mouse has"
+msgstr "hiire nuppude arv"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Sagedus peab sisaldama sufiksit k, M v玫i G (n盲iteks \"2.46G\" - 2,46 GHz "
-"sagedusel), v玫i lisage piisavalt nulle."
-
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP aadress peab olema kujul 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Start at boot"
-msgstr "K盲ivitub alglaadimisel"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Omista masinanimi DHCP aadressist"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Network Hotplugging"
-msgstr "V玫rgu kohene valmidus (hotplugging)"
+"Sisestage palun kataloog (v玫i moodul), kuhu\n"
+" sellel masinal varukoopia salvestada."
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "V玫rgukaadi id tuvastus (kasulik s眉learvutite puhul)"
+msgid "Replay"
+msgstr "Kordamine"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "DHCP masinanimi"
+msgid "Backup other files"
+msgstr "Muude failide varundamine"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "V玫rgumask"
+msgid "No floppy drive available"
+msgstr "Flopiseade ei ole k盲ttesaadav"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "IP aadress"
+msgid "Backup files are corrupted"
+msgstr "Varukoopia failid on vigased"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "TV norm:"
+msgstr "Teles眉steem:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automaatne IP"
+msgid "Cpuid family"
+msgstr "Cpuid perekond"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (juhtprogramm %s)"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Seadistame v玫rgukaardi %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Leedu AZERTY (uuem)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Palun andke IP parameetrid selle masina jaoks.\n"
-"K玫ik read tuleb sisestada IP-aadressi kujul\n"
-"(n盲iteks 12.34.56.78)"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "jah t盲hendab, et matemaatika-kaasprotsessoril on erandivektor"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
-"Valige lihtsalt Olgu, et s盲tteid mitte muuta.\n"
-"Allpool olevate v盲ljade muutmine t眉histab varasemad s盲tted."
+"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
+"Ilma /boot partitsioonita ei ole v玫imalik sellist s眉steemi laadida.\n"
+"Lisage kindlasti /boot partitsioon!"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Hoiatus! Leiti olemasolevad tulem眉眉ri s盲tted. T玫en盲oliselt peaksite need "
-"hiljem 眉le vaatama."
+msgid "Previous"
+msgstr "Eelmine"
-#
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Leitud tulem眉眉ri s盲tted!"
+msgid "Other OS (MacOS...)"
+msgstr "Muu OS (MacOS...)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Salas玫na"
+msgid "To activate the mouse,"
+msgstr "Hiire aktiveerimiseks"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Kasutajatunnus"
+msgid "Bringing up the network"
+msgstr "V玫rgu k盲imapanek"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "脺henduse aegumine (sekundites)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Hetkt玫mmised asuvad p盲rast paigaldust asukohas %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "脺henduse kiirus"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Teie arvuti k玫vakettal on rohkem kui 眉ks Microsoft Windowsi partitsioon.\n"
+"Palun valige v盲lja see, mille suurust soovite Mandrake Linuxi jaoks muuta.\n"
+"\n"
+"Teie abistamiseks on igal partitsioonil n盲idatud \"Nimi Linuxis\", \"Nimi "
+"Windowsis\" ja \"Mahutavus\".\n"
+"\n"
+"\"Nimi Linuxis\" koosneb k玫vakettat眉眉bist, selle numbrist ja partitsiooni\n"
+"numbrist (n盲iteks \"hda1\").\n"
+"\n"
+"K玫vaketta t眉眉p on \"hd\", kui on tegemist IDE-kettaga, ja \"sd\", kui on\n"
+"tegemist SCSI-kettaga.\n"
+"\n"
+"K玫vaketta number on alati t盲ht \"hd\" v玫i \"sd\" j盲rel. IDE-ketastel:\n"
+"\n"
+" * \"a\" - esmase IDE kontrolleri 眉lem,\n"
+"\n"
+" * \"b\" - esmase IDE kontrolleri allutatu,\n"
+"\n"
+" * \"c\" - teisese IDE kontrolleri 眉lem,\n"
+"\n"
+" * \"d\" - teisese IDE kontrolleri allutatu.\n"
+"\n"
+"SCSI-ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
+"\n"
+"\n"
+"\"Nimi Windowsis\" on t盲ht, millega Microsoft Windows vastavat seadet\n"
+"t盲histab (esimene ketas v玫i partitsioon kannab nime \"C:\")."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Valimisviis"
+msgid "Tanzania"
+msgstr "Tansaania"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Valige riik"
+msgid "Computing FAT filesystem bounds"
+msgstr "Arvutan FAT failis眉steemi piire"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 (v玫ib j盲tta t眉hjaks)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Varundusallikad: \n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 (v玫ib j盲tta t眉hjaks)"
+msgid "Content of the file"
+msgstr "Faili sisu"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Sissehelistamiskeskuse number"
+msgid "Authentication LDAP"
+msgstr "LDAP autentimine"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Teenusepakkuja tunnus (n盲iteks minuisp.ee)"
+msgid "Let me pick any driver"
+msgstr "Suvalise juhtprogrammi valimine"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Teie telefoninumber"
+msgid "Profile "
+msgstr "Profiil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kaardi IO_1"
+msgid "transmitted"
+msgstr "眉le kantud"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kaardi IO_0"
+msgid "Palestine"
+msgstr "Palestiina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "Kaardi IO"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kaardi m盲lu (DMA)"
+msgid "%d comma separated strings"
+msgstr "%d komaga eraldatud stringi"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kaardi IRQ"
+msgid "Here is the full list of keyboards available"
+msgstr "V玫imalike klaviatuuride t盲ielik nimekiri"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Palun t盲itke allpool olev v盲li"
+msgid "Theme name"
+msgstr "Teema nimi"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Interneti眉henduse s盲tted"
+msgid "/_Help"
+msgstr "/_Abi"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Paistab, et s眉steem ei ole Internetti 眉hendatud.\n"
-"Palun seadistage 眉hendus uuesti."
+"Siin saate valida, millised selle arvuti k眉lge kinnitatud sk盲nnerid peaksid "
+"olema k盲ttesaadavad ka teistele kohtv玫rgu arvutitele ja millistele nende "
+"hulgast."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Turvakaalutlusel katkestan n眉眉d 眉henduse."
+msgid "the width of the progress bar"
+msgstr "edenemisriba laius"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "S眉steem on n眉眉d Internetti 眉hendatud."
+msgid "Cook Islands"
+msgstr "Cooki saared"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Testime Teie 眉hendust..."
+msgid "Formatting partition %s"
+msgstr "Partitsiooni %s vormindamine"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kas soovite oma Interneti眉hendust proovida?"
+msgid "Hostname required"
+msgstr "Masinanime n玫udmine"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internet configuration"
-msgstr "Interneti s盲tted"
+msgid "Unselect fonts installed"
+msgstr "Paigaldatud fontide valiku t眉histamine"
-#: ../../partition_table/raw.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Teie k玫vakettal juhtub imelikke asju. \n"
-"Andmete pidevuse kontroll eba玫nnestus. \n"
-"See t盲hendab, et kettale kirjutamisel tekivad jamad."
+msgid "Cancel"
+msgstr "Katkesta"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " (Default)"
-msgstr " (Vaikimisi)"
+msgid "Searching for configured scanners ..."
+msgstr "Seadistatud sk盲nnerite otsimine..."
-#: ../../printer/cups.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS serveril \"%s\""
+msgid "Wheel"
+msgstr "Rattaga"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "V玫rguprinterid"
+msgid "Videocard"
+msgstr "Graafikakaart"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tvarukoopiad tar- ja bzip2-vormingus\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on this machine)"
-msgstr "(sellel masinal)"
+msgid "Remove Selected"
+msgstr "Eemalda valitud"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(on %s)"
-msgstr "(masinal %s)"
+msgid "/Autodetect _modems"
+msgstr "/_Modemite automaattuvastus"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tavaline UNIXi tr眉kkimiss眉steem"
+msgid "Remove printer"
+msgstr "Eemalda printer"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"HOIATUS!\n"
+"\n"
+"DrakX hakkab Teie Windowsi partitsiooni suurust muutma.\n"
+"Olge ettevaatlik: see operatsioon v玫ib olla ohtlik Teie failidele.\n"
+"Palun kasutage enne scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
+"Kui olete oma otsuses kindel, vajutage \"Olgu\"."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR, uus p玫lvkond"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Millistel teenustel soovite lubada kasutada Interneti眉hendust?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Meili seadistamise vahend.\n"
+"\n"
+"Siin saab seadistada hoiatuss眉steemi.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LDP - Otsetr眉kkimisdeemon"
+msgid "Other"
+msgstr "Muu"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Default"
+msgstr "Vaikimisi"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tr眉ki kohe"
+msgid "Button 2 Emulation"
+msgstr "Emuleeri 2. hiirenuppu"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown Model"
-msgstr "Tundmatu mudel"
+msgid "type1inst building"
+msgstr "type1inst loomine"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Tundmatu mudel"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (port %s)"
+msgid "choose image file"
+msgstr "valige pildifail"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Masin %s"
+msgid "X server"
+msgstr "X server"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network %s"
-msgstr "V玫rk %s"
+msgid "Domain Admin User Name"
+msgstr "Domeeni administraatori kasutajatunnus"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Liides \"%s\""
+msgid "There was an error while scanning for TV channels"
+msgstr "Telekanalite otsingul tekkis viga"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Kohalik v玫rk"
+msgid "US keyboard (international)"
+msgstr "USA (rahvusvaheline)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Toorprinter (draiverita)"
+msgid "Not installed"
+msgstr "Pole paigaldatud"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", kasutades k盲sku %s"
+msgid "LAN connection"
+msgstr "LAN 眉hendus"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " Novelli serveril \"%s\", printer \"%s\""
+msgid "/File/-"
+msgstr "/Fail/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " SMB/Windowsi serveril \"%s\", jagatud printer \"%s\""
+msgid "Italian"
+msgstr "Itaalia"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP masinal \"%s\", port %s"
+msgid "Basic"
+msgstr "P玫hiline"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " LPD serveril \"%s\", printer \"%s\""
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright (C) 2002: MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", tr眉kkimine masinal %s"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", mitme funktsiooniga seade"
+msgid "pdq"
+msgstr "pdq"
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", mitme funktsiooniga seade HP JetDirectil"
+msgid "Card IO"
+msgstr "Kaardi IO"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", mitme funktsiooniga seade USB-l"
+msgid "when checked, owner and group won't be changed"
+msgstr "m盲rkimise korral ei muudeta omanikku ja gruppi"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", mitme funktsiooniga seade paralleelpordis \\#%s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"See on eriline, alglaadimisel\n"
+"kasutatav partitsioon, mis\n"
+"v玫imaldab mitme operatsioonis眉steemi\n"
+"laadimist.\n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB printer"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Valige palun iga sammu puhul, kas selle peaks l盲bi viima automaatselt, nagu "
+"see sooritati paigalduse ajal, v玫i soovite seal ise kaasa r盲盲kida"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB printer \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Samuti saate otsustada, kas v玫rgusk盲nnerid peaksid olema automaatselt siin "
+"arvutis k盲ttesaadavad"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " paralleelpordis \\#%s"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-v玫rk FTP vahendusel.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Kohalikud printerid"
+msgid "Russian (Yawerty)"
+msgstr "Vene (Yawerty)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "T枚枚 toru kaudu k盲suks"
+msgid "You must enter a device or file name!"
+msgstr "Seadme- v玫i failinime sisestamine on kohustuslik!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Printeri seadme URI"
+msgid "/_Quit"
+msgstr "/_V盲lju"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "NetWare printserver"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Selleks vajate Alcateli Microcode'i.\n"
+"Seda saate alla laadida v玫rgust\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"ja saadud 'mgmt.o' kopeerige kataloogi /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT printserver"
+msgid "Graphics memory: %s kB\n"
+msgstr "Videom盲lu: %s kB\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "V玫rguprinter (TCP/Socket)"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"K盲esolev rakendus on vaba tarkvara. Te v玫ite seda edasi levitada\n"
+"ja/v玫i muuta vastavalt GNU 脺ldise Avaliku Litsentsi tingimustele, nagu\n"
+"need on avaldanud Vaba Tarkvara Fond; kas Litsentsi versioon number 2\n"
+"v玫i (vastavalt Teie valikule) 眉ksk玫ik milline hilisem versioon.\n"
+"\n"
+"Seda rakendust levitatakse lootuses, et see on kasulik, kuid\n"
+"ILMA IGASUGUSE GARANTIITA; isegi KESKMISE/TAVALISE\n"
+"KVALITEEDI GARANTIITA v玫i SOBIVUSELE TEATUD KINDLAKS\n"
+"EESM脛RGIKS. 脺ksikasjade suhtes vaadake GNU 脺ldist Avalikku Litsentsi.\n"
+"\n"
+"Te peaks olema saanud GNU 脺ldise Avaliku Litsentsi koopia koos selle\n"
+"rakendusega; kui ei, siis v玫tke 眉hendust Vaba Tarkvara Fondiga aadressil:\n"
+"Free Software Foundation, 59 Temple Place - Suite 330, Boston,\n"
+"MA 02111-1307, USA.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "lpd printserver"
+msgid "access to compilation tools"
+msgstr "ligip盲盲s kompileerimisvahenditele"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "CUPS printserver"
+msgid "Please select data to restore..."
+msgstr "Valige palun taastatavad andmed..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "V玫rguprinter"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Kui soovite kasutada aboot-i, j盲tke palun ketta algusesse v盲hemalt 2048 \n"
+"sektorit vaba ruumi"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Kohalik printer"
+msgid "Standard test page"
+msgstr "Tavaline testlehek眉lg"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Rakenduste seadistamine..."
+msgid "Create"
+msgstr "Tekita"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "What"
+msgstr "Mis"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Printeri \"%s\" eemaldamine..."
+msgid "There was an error ordering packages:"
+msgstr "Pakettide tellimisel tekkis viga:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Kas t玫esti eemaldada printer \"%s\"?"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgaaria (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove printer"
-msgstr "Eemalda printer"
+msgid "Disable Server"
+msgstr "Serveri keelamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Printeri kasutama 玫ppimine"
+msgid "Filesystem encryption key"
+msgstr "Failis眉steemi kr眉ptov玫ti"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Tr眉ki testlehek眉lg(i)"
+msgid "Gujarati"
+msgstr "Gud啪arati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Printeri \"%s\" eemaldamine StarOffice/OpenOffice.org/GIMP-ilt eba玫nnestus."
+"Valige palun esimene number k眉mnesest vahemikust, mida soovite\n"
+"muuta, v玫i vajutage Enter j盲tkamiseks.\n"
+"Ja Teie valik on? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Printer \"%s\" eemaldati edukalt StarOffice/OpenOffice.org/GIMP-ilt."
+msgid "Save theme"
+msgstr "Teema salvestamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Printeri eemaldamine StarOffice/OpenOffice.org/GIMP-ilt"
+msgid "group"
+msgstr "grupp"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Eemalda StarOffice/OpenOffice.org/GIMP-ilt"
+msgid "Brazil"
+msgstr "Brasiilia"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Printeri \"%s\" lisamine StarOffice/OpenOffice.org/GIMP-ile eba玫nnestus."
+msgid "Auto Install"
+msgstr "Automaatpaigaldus"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "Printer \"%s\" lisati edukalt StarOffice/OpenOffice.org/GIMP-ile."
+msgid "Network Configuration Wizard"
+msgstr "V玫rguseadistuste n玫ustaja"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Printeri lisamine StarOffice/OpenOffice.org/GIMP-ile"
+msgid "Removable media automounting"
+msgstr "Eemaldatava andmekandja automaatne haakimine"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Lisa printer StarOffice/OpenOffice.org/GIMP-ile"
+msgid "Printing"
+msgstr "Tr眉kkimine"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printer \"%s\" on m盲盲ratud vaikeprinteriks."
+msgid "Unkown driver"
+msgstr "Tundmatu juhtprogramm"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Vaikeprinter"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Ei leitud 眉htegi printerit, mis oleks masinaga otse 眉hendatud"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "M盲盲ra vaikeprinteriks"
+msgid "Create a new partition"
+msgstr "Loo uus partitsioon"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Printeri valikud"
+msgid "Driver:"
+msgstr "Juhtprogramm: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Printeri tootja, mudel"
+msgid "unknown"
+msgstr "Tundmatu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Printeri tootja, mudel, draiver"
+msgid "Use fdisk"
+msgstr "Kasuta fdisk-i"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Vana printeri \"%s\" eemaldamine..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "KEERUTAGE RATTAKEST!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Printeri nimi, kirjeldus, asukoht"
+msgid "sent: "
+msgstr "saadetud: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Printeri 眉hendusviis"
+msgid "Automatic IP"
+msgstr "Automaatne IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Toorprinter"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Ja n眉眉d ongi paigaldus selja taga ning Teie GNU/Linuxi s眉steem valmis "
+"t枚枚ks.\n"
+"Selleks tuleb vaid kl玫psata \"%s\" ning arvuti teeb taask盲ivituse, mille "
+"j盲rel\n"
+"v玫ite valida, kas k盲ivitada GNU/Linux v玫i Windows (kui Teie arvutil on mitu\n"
+"s眉steemi).\n"
+"\n"
+"Nupp \"%s\" pakub veel kaks v玫imalust:\n"
+"\n"
+" * \"%s\": loob paigaldusflopi, mis sooritab kogu\n"
+"paigalduse ilma kasutajata, paigaldus ise on samasugune nagu 盲sja\n"
+"seljataha j盲盲nu.\n"
+"\n"
+" Selle valiku korral ilmub veel kaks erinevat v玫imalust:\n"
+"\n"
+" * \"%s\". See on osaliselt automaatne, sest partitsioneerimisel\n"
+"(aga ka ainult seal) on v玫imalik sekkuda.\n"
+"\n"
+" * \"%s\". T盲isautomaatne paigaldus: k玫vaketas kirjutatakse t盲ielikult\n"
+"uuesti, k玫ik varasemad andmed kustutatakse.\n"
+"\n"
+" See v玫imalus v玫ib olla kasulik, kui paigaldamine on kavas ette v玫tta "
+"paljudel\n"
+"眉hesugustel masinatel. L盲hemalt vaadake meie veebilehek眉ljel\n"
+"automaatpaigalduse sektsiooni.\n"
+"\n"
+" * \"%s\"(*): salvestab paigalduse k盲igus valitud pakettide\n"
+"nimekirja. Kui n眉眉d v玫tate ette uue paigalduse, asetage flopi seadmesse "
+"ning\n"
+"k盲ivitage paigaldus klahvile [F1] vajutades abiekraani vahendusel, andes "
+"k盲su\n"
+">>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Selleks l盲heb vaja FAT-vormingus flopit (sellise loomiseks GNU/Linuxis\n"
+"andke k盲sk \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Do it!"
-msgstr "N眉眉d!"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Close"
-msgstr "Sulge"
+msgid "Configuration of a remote printer"
+msgstr "V玫rguprinteri seadistamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Mida soovite muuta?"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Printeri seadistuste muutmine"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "M盲rkige palun, kui soovite lindi enne varundamist puhastada."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add a new printer"
-msgstr "Lisa uus printer"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Internetiplatvorm, mis vastab firmade spetsiifilistele tugivajadustele"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Tavakasutus"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URLi alguses peab olema 'ftp:' v玫i 'http:'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Tr眉kkimiss眉steemi muutmine"
+msgid "Add a new rule at the end"
+msgstr "Uue reegli lisamine l玫ppu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPSi s盲tted"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"Samuti saate otsustada, kas v玫rguprinterid peaksid olema automaatselt siin "
+"arvutis k盲ttesaadavad"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"V盲rskenda printeriloendit (n盲itamaks k玫iki saadaolevaid CUPS printserveri "
-"printereid)"
+"N眉眉d v玫ite moodulile %s parameetreid m盲盲rata.\n"
+"Parameetrid on vormingus \"nimi=v盲盲rtus nimi2=v盲盲rtus2 ...\".\n"
+"N盲iteks: \"io=0x300 irq=7\""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "N盲ita k玫iki saadaolevaid CUPS printserveri printereid"
+msgid "Quit without writing the partition table?"
+msgstr "Kas v盲ljuda partitsioonitabelit salvestamata?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Seadistatud on j盲rgmised printerid. Topeltkl玫ps printeril v玫imaldab muuta "
-"selle seadistusi, teha see vaikeprinteriks v玫i vaadata selle infot."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Tr眉kkimiss眉steem: "
+msgid "Installing packages..."
+msgstr "Pakettide paigaldamine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Paigaldatud tarkvara kontroll..."
+msgid "Dutch"
+msgstr "Hollandi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Foomaticu paigaldamine..."
+msgid "The following packages need to be installed:\n"
+msgstr "Paigaldada tuleb j盲rgmised paketid:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Printeri \"%s\" seadistamine eba玫nnestus!"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Printeri \"%s\" seadistamine..."
+msgid "service setting"
+msgstr "teenuse s盲tted"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Printeri andmete lugemine..."
+msgid "Custom"
+msgstr "Isetehtud"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Millist tr眉kkimiss眉steemi (spuulerit) soovite kasutada?"
+msgid "File is already used by another loopback, choose another one"
+msgstr "See fail on juba loopback-ina kasutusel, valige m玫ni muu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Printeri spuuleri valik"
+msgid "Read-only"
+msgstr "Ainult lugemis玫igusega"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Vaikeprinteri seadmine..."
+msgid "Latvia"
+msgstr "L盲ti"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "%s paigaldamine..."
+msgid "No known driver"
+msgstr "Juhtprogrammi ei 玫nnestunud tuvastada"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "%s eemaldamine..."
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Tr眉kkimiss眉steemi (%s) ei k盲ivitata automaatselt arvuti alglaadimisel.\n"
-"\n"
-"On v玫imalik, et automaatk盲ivitus l眉litati v盲lja seoses k玫rgema turvataseme "
-"valikuga, sest tr眉kkimiss眉steem on v玫imaliku r眉nnaku objekt.\n"
-"\n"
-"Kas soovite tr眉kkimiss眉steemi automaatk盲ivituse taas sisse l眉litada?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Tr眉kkimiss眉steem k盲ivitatakse alglaadimisel"
+"Kui see ei ole printer, mida soovite seadistada, kirjutage sisendireale "
+"seadmenimi/failinimi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Te p眉眉ate praegu paigaldada tr眉kkimiss眉steemi %s s眉steemi, mis t枚枚tab "
-"turvatasemel '%s'.\n"
+"Teie masinas ei leitud helikaarti. Kontrollige palun, et Linuxi toega "
+"helikaart on korrektselt 眉hendatud.\n"
"\n"
-"See tr眉kkimiss眉steem k盲ivitab deemoni (taustal t枚枚tava protsessina), mis "
-"v玫tab vastu ja k盲sitleb tr眉kkimist枚id. Deemonile p盲盲seb v玫rgu kaudu ligi ka "
-"kaugmasinatelt, mist玫ttu see kujutab endast v玫imaliku r眉nnaku objekti. "
-"Seet玫ttu k盲ivitatakse selle turvataseme puhul vaikimisi ainult m玫ned valitud "
-"deemonid.\n"
"\n"
-"Kas soovite t玫esti seadistada tr眉kkimist sellel masinal?"
+"Meie riistvara andmebaasi saab n盲ha aadressil:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Tr眉kkimiss眉steemi paigaldamine turvatasemel '%s'"
+msgid "Configure Local Area Network..."
+msgstr "Kohtv玫rgu (LAN) seadistamine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "paranoid"
-msgstr "paranoiline"
+msgid "Launch the sound system on your machine"
+msgstr "K盲ivitab helis眉steemi"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "high"
-msgstr "k玫rge"
+msgid "Preparing printer database..."
+msgstr "Printeri andmebaasi ettevalmistamine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Tr眉kkimiss眉steemi taask盲ivitamine..."
+msgid "Information"
+msgstr "Info"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "V玫rguprinteri seadistamine"
+msgid "No network card"
+msgstr "V玫rgukaart puudub"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"V玫rgu眉hendus ei t枚枚tanud ja seda ei saa ka k盲ivitada. Kontrollige palun oma "
-"seadistusi ja riistvara. Seej盲rel proovige uuesti seadistada v玫rguprinterit."
+msgid "Which filesystem do you want?"
+msgstr "Millist failis眉steemi soovite kasutada?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Paigalduse ajal seadistatud v玫rku ei 玫nnestu praegu k盲ivitada. Kontrollige "
-"palun, kas v玫rk on k盲ttesaadav p盲rast s眉steemi uut alglaadimist, ning "
-"korrigeerige seadistust Mandrake Juhtimiskeskuse sektsioonis \"Kohtv玫rk ja "
-"Internet\"/\"脺hendus\", misj盲rel seadistage printer samuti Juhtimiskeskuses, "
-"aga sektsioonis \"Riistvara\"/\"Printer\". "
+msgid "3 buttons"
+msgstr "3 nupuga"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Seadistada v玫rk otsekohe"
+msgid "Detailed information"
+msgstr "脺ksikasjalik info"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "J盲tkata ilma v玫rku seadistamata"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"Kavatsesite hakata seadistama v玫rguprinterit. Selleks l盲heb vaja t枚枚tavat "
-"v玫rgu眉hendust, aga Teil on v玫rk veel seadistamata. Kui Te j盲tkate ilma v玫rku "
-"seadistamata, et ole Teil v玫imalik kasutada printerit, mida te tahate "
-"seadistada. Kuidas peaks n眉眉d edasi talitama?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "V玫rguvalmidus on seadistamata"
+"Printeri vaikes盲tted\n"
+"\n"
+"Kontrollige palun, et lehek眉lje suurus ja tindit眉眉p/tr眉kiresiim (kui "
+"v玫imalik), samuti laserprinterite riistvaralised s盲tted (m盲lu, dupleksseade, "
+"lisasalved) oleksid m盲盲ratud korrektselt. Pange t盲hele, et v盲ga suure "
+"tr眉kikvaliteedi v玫i lahutusv玫ime puhul muutub tr眉kkimine m盲rgatavalt "
+"aeglasemaks."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "V玫rgu k盲ivitamine..."
+msgid "This floppy is not FAT formatted"
+msgstr "See flopi ei ole FAT-vormingus"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Printeri andmete v盲rskendamine..."
+msgid "Configuring network"
+msgstr "V玫rguseadistused"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Kandsite 眉le oma senise vaikeprinteri (\"%s\"). Kas see peaks olema "
-"vaikeprinter ka uue tr眉kkimiss眉steemi %s puhul?"
+msgid "Graphic Card"
+msgstr "Graafikakaart"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Printeri s盲tete 眉lekandmine"
+msgid "Resizing Windows partition"
+msgstr "Arvutan Windowsi failis眉steemi piire"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Transferring %s..."
-msgstr "%s 眉lekandmine..."
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 (v玫ib j盲tta t眉hjaks)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Uus printeri nimi"
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Printer \"%s\" on juba olemas,\n"
-"kas t玫esti kirjutada selle s盲tted 眉le?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Printeri nimi tohib sisaldada vaid t盲hti, numbreid ja alakriipsu"
+"N眉眉d saate partitsioneerida %s k玫vaketta\n"
+"Kui olete valmis, salvestage k盲suga 'w'"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer"
-msgstr "Kanna 眉le"
+msgid "Close"
+msgstr "Sulge"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"Printer nimega \"%s\" on juba %s olemas. \n"
-"Vajutage \"Kanna 眉le\" selle 眉lekirjutamiseks.\n"
-"Te v玫ite k眉ll ka sisestada uue nime v玫i selle printeri vahele j盲tta."
+"\"%s\": v玫imaldab konrollida praegust maa valikut. Kui see ei ole riik,\n"
+"kus Te viibite, vajutage nuppu \"%s\" ja valige m玫ni muu maa. Kui\n"
+"Teie maad ei ole ilmuvas nimekirjas, vajutage nuppu \"%s\", mis avab\n"
+"riikide t盲isnimekirja."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "脛ra kanna printereid 眉le"
+msgid "Calendar"
+msgstr "Kalender"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"\n"
-"M盲rkige printer(id), mida soovite 眉le kanda, ning vajutage \n"
-"\"Kanna 眉le\"."
+"Taasta valitud\n"
+"kataloogikirje"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"\n"
-"脺le kanda ei saa ka printereid, mis on seadistatud nende tootjate pakutud "
-"PPD failidega v玫i loomup盲raste CUPS draiveritega."
+"Et kasutada teise masina lpd printerit, peate sisestama printserveri nime ja "
+"serveril kasutatava printeri nime."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Lisaks sellele ei saa 眉le kanda j盲rjekordi, mis on loodud k盲esoleva "
-"programmi v玫i \"foomatic-configure\" poolt."
+msgid "Iceland"
+msgstr "Island"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ja LPRng ei toeta IPP printereid.\n"
+msgid "consolehelper missing"
+msgstr "consolehelper puudub"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ toetab ainult kohalikke printereid, v玫rguprintereid (LPD) ning Socket/"
-"TCP printereid.\n"
+msgid "stopped"
+msgstr "peatatud"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ei toeta printereid Novelli serveritel ega printereid, mis saadavad "
-"andmeid suvalise vormiga k盲skudena.\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Kas FPU-l on irq vektor"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Teil on v玫imalus kopeerida printeri s盲tted, mida m盲盲rasite spuulerile %s, "
-"Teie praegusele spuulerile %s. 脺le kantakse k玫ik s盲tete andmed (printeri "
-"nimi, kirjeldus, asukoht, 眉hendusviis, vaikevalikud), aga mitte t枚枚d.\n"
-"K玫iki j盲rjekordi ei saa 眉le kanda j盲rgmistel p玫hjustel:\n"
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Teie printer on seadistatud automaatselt ja v玫imaldab Teil oma arvutilt ligi "
-"p盲盲seda fotokaardiketastele. Fotokaartidele p盲盲seb ligi graafilise rakenduse "
-"\"MtoolsFM\" (men眉眉s: \"Rakendused\" -> \"Failivahendid\" -> \"Failihaldur "
-"MTools\") v玫i k盲sureavahendi \"mtools\" abil (andke k盲sureal k盲sk \"man "
-"mtools\", et saada selle kohta rohkem infot). Kaartide failis眉steemi leiate "
-"kettal \"p:\" v玫i m玫nel sellele j盲rgneva t盲hega kettal, kui Teil juhtub "
-"olema enam kui 眉ks HP fotokaardiseadmega printer. Rakenduses \"MtoolsFM\" "
-"v玫ite liikuda ketaste vahel faililoendi 眉lal paremas nurgas asuval v盲ljal "
-"leiduvaid t盲hti vahetades."
+msgid "Expand Tree"
+msgstr "Ava puu"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Mitme funktsiooniga seade on automaatselt seadistatud ja suudab ka "
-"skaneerida. N眉眉d v玫ite skaneerida \"scanimage\" abil (\"scanimage -d hp:%s\" "
-"sk盲nneri m盲盲ramiseks, kui Teil on neid mitu) k盲surealt v玫i graafiliste "
-"liideste \"xscanimage\" v玫i \"xsane\" vahendusel. Kui kasutate GIMPi, v玫ite "
-"skaneerida ka men眉眉k盲suga \"Fail\"/\"Hangi\". Kui soovite rohkem infot, "
-"andke k盲sureal korraldus \"man scanimage\".\n"
+"Vana \"%s\" juhtprogramm on mustas nimekirjas.\n"
"\n"
-"脛rge selle seadme puhul \"scannerdraket\" kasutage!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Tr眉kitakse testlehek眉lg(i)..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print option list"
-msgstr "Tr眉kkimisvalikute loend"
+"On teatatud, et see tekitab mahalaadimisel kernelile jama.\n"
+"\n"
+"Uut \"%s\" juhtprogrammi kasutatakse j盲rgmisel alglaadimisel."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tr眉kkimine printeril \"%s\""
+msgid "Expert Mode"
+msgstr "Ekspertresiim"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Tr眉kkimine/fotokaartide ligip盲盲s seadmel \"%s\""
+msgid "Printer options"
+msgstr "Printeri valikud"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tr眉kkimine/skaneerimine seadmel \"%s\""
+msgid "Local Network adress"
+msgstr "Kohtv玫rgu aadress"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tr眉kkimine/skaneerimine/fotokaardid seadmel \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Varunda s眉steemsed failid (kataloog /etc)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Seda, millised valikud on saadaval praeguse printeri puhul, saab teada kas "
-"allpool seisvast loendist v玫i p盲rast vajutust nupule \"Tr眉kkimisvalikute "
-"loend\".%s%s%s\n"
+"Teil on n眉眉d v玫imalus alla laadida uuendatud pakette. Need on v盲lja lastud\n"
+"p盲rast Mandrake Linuxi distributsiooni ilmumist ja v玫ivad sisaldada vigade\n"
+"parandusi v玫i turvauuendusi.\n"
+"\n"
+"Allalaadimiseks peab Teil olema t枚枚tav interneti眉hendus.\n"
"\n"
+"Kas soovite uuendusi paigaldada?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Samba server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg, alert=1)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
+"Argumendid: (arg, alert=1)\n"
"\n"
-"K盲sud \"%s\" ja \"%s\" v玫imaldavad samuti muuta konkreetse tr眉kkimist枚枚 "
-"valikuid. Selleks tuleb vaid lisada soovitud s盲tted k盲sureale, n盲iteks \"%s "
-"<fail>\".\n"
+"IP v玫ltsimiskaitse lubamine/keelamine."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Valikute seadistamiseks ja tr眉kkimist枚枚de haldamiseks saab kasutada ka "
-"graafilist liidest \"xpdq\".\n"
-"Kui kasutate t枚枚lauakeskkonnana KDE-d, on Teil t枚枚laual \"paanikanupp\", "
-"ikoon nimetusega \"PEATA printer!\", millele kl玫psates peatatakse otsekohe "
-"k玫ik tr眉kkimist枚枚d. See on kasulik n盲iteks paberiummistuste esinemisel.\n"
+msgid "Australian Optus cable TV"
+msgstr "Austraalia Optus kaabli-TV"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Seda k盲sku saab kasutada ka paljude rakenduste tr眉kkimisdialoogi v盲ljal "
-"\"Tr眉kkimisk盲sk\". Kuid seal ei ole vaja kirjutada failinime, sest selle "
-"annab rakendus ise.\n"
+" <Tab>/<Alt-Tab> v盲ljade vahel | <Space> valib | <F12> j盲rgmine samm "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Faili tr眉kkimiseks k盲surealt (terminaliaken) kasutage k盲sku \"%s <fail>\" "
-"v玫i \"%s <fail>\".\n"
+msgid "Subnet:"
+msgstr "Alamv玫rk:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Praeguse printeri puhul kasutusk玫lblike valikute loendi vaatamiseks vajutage "
-"nupule \"Tr眉kkimisvalikute loend\"."
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"K盲sk \"%s\" v玫imaldab muuta ka konkreetse tr眉kkimist枚枚 valikuid. Selleks "
-"lisage vaid soovitud valik k盲sureale, nt \"%s <fail>\". "
+msgid "Please enter the host name or IP."
+msgstr "Sisestage palun masinanimi v玫i IP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Faili tr眉kkimiseks k盲surealt (terminaliaken) kasutage k盲sku \"%s <fail>\".\n"
+msgid "When"
+msgstr "Millal"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Teine nimeserver (soovituslik)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Soome"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"See on loend praegusel printeril kasutamisk玫lblike tr眉kkimisvalikutega:\n"
+"Argumendid: (arg)\n"
"\n"
+"Autoriseerib k玫ik teenused, mida kontrollib tcp_wrappers (vt hosts.deny"
+"(5)), \n"
+"kui \\fIarg\\fP = ALL. Ainult kohalikud, kui \\fIarg\\fP = LOCAL ja keelab \n"
+"k玫ik, kui \\fIarg\\fP = NONE. Vajalise teenuste autoriseerimiseks kasutage \n"
+"faili /etc/hosts.allow (vt hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Neid k盲ske saab kasutada ka paljude rakenduste tr眉kkimisdialoogi v盲ljal "
-"\"Tr眉kkimisk盲sk\", kuid seal pole vaja kirjutada failinime, sest selle annab "
-"rakendus ise.\n"
+msgid "Color depth: %s\n"
+msgstr "V盲rvis眉gavus: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Faili tr眉kkimiseks k盲surealt (terminaliaknas) v玫ib kasutada kas k盲sku \"%s "
-"<fail>\" v玫i graafilist tr眉kkimisvahendit: \"xpp <fail>\" v玫i \"kprinter "
-"<fail>\". Graafilised vahendid v玫imaldavad h玫lpsamalt valida printerit ja "
-"muuta valikuid.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Kas k玫ik oli korras?"
+msgid "Loading from floppy"
+msgstr "Laadimine flopilt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Testlehek眉lg on saadetud printerile.\n"
-"N眉眉d v玫ib minna natuke aega, enne kui printer alustab.\n"
+"Drakperm on kasutatav failide vaatamiseks, et mseci abil parandada loabitte, "
+"omanikke ja gruppe.\n"
+"V玫ite ka muuta oma reegleid, mis t眉histavad vaikereeglid."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testlehek眉lg on saadetud printerile.\n"
-"N眉眉d v玫ib minna natuke aega, enne kui printer alustab.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do not print any test page"
-msgstr "脛ra tr眉ki 眉htegi testlehek眉lge"
+msgid "Slovenia"
+msgstr "Sloveenia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Fototestlehek眉lg"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"Sisesta kasutaja\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternatiivne testlehek眉lg (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- PCI- ja USB-seadmed: tootja, seade, allettev玫tja ja allseadme PCI/USB id-d"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiivne testlehek眉lg (Letter)"
+msgid "ProgressBar color selection"
+msgstr "Edenemisriba v盲rvi valimine"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Tavaline testlehek眉lg"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Praegu on kasutusel sellised kirjed.\n"
+"Te v玫ite neid lisada ning olemasolevaid muuta."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print"
-msgstr "Tr眉ki"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "No test pages"
-msgstr "脛ra tr眉ki"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Valige palun testlehek眉ljed, mida tr眉kkida.\n"
-"M盲rkus: fototesti tr眉kkimine v玫ib v玫tta 眉sna kaua aega ning liiga v盲hese "
-"m盲luga laserprinteritel ei pruugi see 眉ldse 玫nnestuda. Enamasti peaks "
-"piisama tavalise testlehek眉lje tr眉kkimisest."
+"Laseb k盲ivitada 眉hekordseid k盲ske etteantud ajal v玫i ootab s眉steemi\n"
+"koormuse laskumist k盲su k盲ivitamiseks piisavale tasemele."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testlehek眉ljed"
+msgid "Radio support:"
+msgstr "Raadiotugi:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Kas soovite m盲盲rata selle printeri (\"%s\")\n"
-"vaikeprinteriks?"
+msgid "Installing SANE packages..."
+msgstr "SANE pakettide paigaldamine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "V玫ti %s v盲ljub piiridest!"
+msgid "boot disk creation"
+msgstr "alglaadimisketta loomine"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "V玫ti %s peab olema arv!"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "V玫ti %s peab olema t盲isarv!"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Printeri vaikes盲tted"
+msgid "Change type"
+msgstr "Muuda t眉眉pi"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO paigaldamine"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Varundamine CD/DVDROM-ile"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Printeri vaikes盲tted\n"
+"脮nnitlen, paigaldamine on edukalt l玫petatud.\n"
+"V玫tke palun v盲lja flopi ja/v玫i CD ja vajutage Enter alglaadimiseks.\n"
"\n"
-"Kontrollige palun, et lehek眉lje suurus ja tindit眉眉p/tr眉kiresiim (kui "
-"v玫imalik), samuti laserprinterite riistvaralised s盲tted (m盲lu, dupleksseade, "
-"lisasalved) oleksid m盲盲ratud korrektselt. Pange t盲hele, et v盲ga suure "
-"tr眉kikvaliteedi v玫i lahutusv玫ime puhul muutub tr眉kkimine m盲rgatavalt "
-"aeglasemaks."
+"\n"
+"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
+"Mandrake Linuxi kodulehek眉ljelt:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Abi s眉steemi edasiseks seadistamiseks saab eelk玫ige dokumendist\n"
+"\"Official Mandrake Linux User's Guide\"."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "HP LaserJet 1000 p眉sivara laadimine"
+msgid "paranoid"
+msgstr "paranoiline"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Saada p盲rast iga varundamist meiliraport aadressile:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Tr眉kkimiseks Lexmarki inkjetil antud seadistusega l盲heb Teil tarvis Lexmarki "
-"pakutavaid inkjet printeri draivereid (http://www.lexmark.com/). Kl玫psake "
-"viidal \"Drivers\". Seej盲rel valige oma mudel ja seej盲rel "
-"operatsioonis眉steem \"Linux\". Draiverid on kas RPM-paketid v玫i "
-"shelliskriptid interaktiivse graafilise paigalduse v玫imalusega. Te ei pruugi "
-"seda seadistust sooritada graafiliste kasutajaliideste abil. Katkestage kohe "
-"p盲rast litsentsilepinguga n玫ustumist. Seej盲rel tr眉kkige \"lexmarkmaintain\" "
-"abil printeripea joondamise lehek眉ljed ning kohandage selle rakenduse abil "
-"pea joondamise s盲tteid."
+"Seda k盲sku saab kasutada ka paljude rakenduste tr眉kkimisdialoogi v盲ljal "
+"\"Tr眉kkimisk盲sk\". Kuid seal ei ole vaja kirjutada failinime, sest selle "
+"annab rakendus ise.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjeti s盲tted"
+msgid "Resolution"
+msgstr "Kuvatihedus"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Lexmarki pakutavad inkjet printerite draiverid toetavad ainult kohalikke "
-"printereid, mitte aga printereid kaugarvutitel v玫i printserveritel. 脺hendage "
-"palun oma printer kohalikku porti v玫i seadistage see masinal, millega "
-"printer on 眉hendatud."
+"Et tr眉kkida SMB printeril, peate andma vastava serveri SMB nime\n"
+"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja v玫ib-olla ka\n"
+"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
+"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salas玫na ja t枚枚grupi."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-"Asusite seadistama OKI laserprinterit (winprinter). Need\n"
-"kasutavad v盲ga omap盲rast sideprotokolli ja t枚枚tavad seep盲rast ainult "
-"esimeses paralleelpordis. Kui Teie printer on 眉hendatud m玫nda muusse porti "
-"v玫i printserveriga, 眉hendage palun see esimese paralleelpordiga, enne kui "
-"tr眉kite testlehek眉lje. Vastasel juhul printer lihtsalt ei t枚枚ta ja draiver "
-"eirab Teie m盲盲ratud 眉hendusviisi."
+"Argumendid: (arg)\n"
+"\n"
+" Aktsepteerib/l眉kkab tagasi icmp echo."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinteri s盲tted"
+msgid "reconfigure"
+msgstr "uuesti seadistada"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Kui Teie printerit loendis ei leidu, valige m玫ni 眉hilduv (vaadake printeri "
-"k盲siraamatust) v玫i sarnane."
+"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
+"SEE ON AGA EKSPERIMENTAALNE JA V脮IB OLLA EBASTABIILNE."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Kontrollige palun, kas Printerdrake automaattuvastus m盲盲ras Teie printeri "
-"mudeli 玫igesti. Valige loendist 玫ige mudel, kui kursor seisab vale mudeli "
-"v玫i \"toorprinteri\" kohal."
+msgid "Xinetd Service"
+msgstr "Xinetd teenus"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Milline on Teie printeri mudel?"
+msgid "access to network tools"
+msgstr "ligip盲盲s v玫rgut枚枚vahenditele"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Printeri mudeli valik"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "HP LaserJet 1000 p眉sivara laadimine"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Printeri andmebaasi lugemine..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 v玫imaldab teil kasutada uusimat tarkvara helifailide "
+"m盲ngimiseks, piltide v玫i fotode t枚枚tlemiseks ning videode vaatamiseks"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Mudeli valik k盲sitsi"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Nimekiri k玫igist automaatselt tuvastatud printeritest. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Mudel 玫ige"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Viga aboot-i paigaldamisel, \n"
+"kas sundida peale, riskides esimese partitsiooni h盲vinguga?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
"\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
msgstr ""
-"Printerdrake v玫rdles printeri automaattuvastusel leitud mudelinime oma "
-"printeri andmebaasis leiduvate mudelitega, et leida sobiv vaste. Valik v玫ib "
-"olla ekslik, eriti juhul, kui Teie printerit ei peaks mingil p玫hjusel "
-"andmebaasis leiduma. Seep盲rast kontrollige, kas valik on 玫ige ning vajutage "
-"\"Mudel 玫ige\", kui see on nii, v玫i \"Mudeli valik k盲sitsi\", kui midagi on "
-"valesti, mille j盲rel saate j盲rgmisel sammul valida printeri mudeli "
-"iseseisvalt.\n"
+"valikute kirjeldused:\n"
"\n"
-"Teie printeri puhul leidis Printerdrake:\n"
+" Sellel sammul v玫imaldab Drakbackup muuta:\n"
+"\n"
+" - Tihendusmeetodit:\n"
+" \n"
+" Kui valite tihenduse bzip2, 玫nnestub teil andmeid\n"
+" tihendada paremini kui gzip-iga (umbes 2-10 %%).\n"
+" See ei ole vaikimisi m盲rgitud, sest see meetod\n"
+" n玫uab ka palju enam aega (umbes 1000%% enam).\n"
+" \n"
+" - Uuendamismeetodit:\n"
+"\n"
+" See v玫imalus uuendab Teie varukoopiad, kuid pole\n"
+" tegelikult eriti m玫istlik, sest enne seda, kui uuendada,\n"
+" tuleb varukoopiad lahti pakkida.\n"
+" \n"
+" - .backupignore meetodit:\n"
+"\n"
+" Nagu cvs-i puhul, eirab ka Drakbackup igas kataloogis\n"
+" k玫ike seda, mis on kirjas .backupignore failides.\n"
+" nt: \n"
+" /*> cat .backupignore*\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your printer model"
-msgstr "Teie printeri mudel"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Taasta valitud\n"
+"failid"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Printeri andmebaasi ettevalmistamine..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s on olemas, kas kustutada?\n"
+"\n"
+"Hoiatus: Kui te olete selle protsessi juba sooritanud, tuleks\n"
+" Teil ka kirje kustutada serveril autoriseeritud v玫tmete seast."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Location"
-msgstr "Asukoht"
+msgid "Please fill or check the field below"
+msgstr "Palun t盲itke allpool olev v盲li"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Kirjeldus"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Kas salvestada /etc/fstab muudatused"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Name of printer"
-msgstr "Printeri nimi"
+msgid "Boot Protocol"
+msgstr "Laadimisprotokoll"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Iga printer vajab nime (n盲iteks \"printer\"). Kirjelduse ja asukoha v盲lja ei "
-"ole vaja tingimata t盲ita, need on vaid kommentaarid kasutajatele."
+msgid "LVM-disks %s\n"
+msgstr "LVM-kettad %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Sisestage printeri nimi ja kommentaar"
+msgid "The package %s is needed. Install it?"
+msgstr "Vajalik on pakett %s. Kas paigaldada see?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Printer tehakse CUPS-ile k盲ttesaadavaks"
+msgid "On boot"
+msgstr "Alglaadimisel"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Kontrollin ja h盲盲lestan HPOJ.."
+msgid "Bus identification"
+msgstr "Siinitunnus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Digifoto m盲lukaardi lugeja Teie HP mitmefunktsionaalsel seadmel"
+msgid "Please make a backup of your data first"
+msgstr "Palun tehke oma andmetest k玫igepealt varukoopia"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skaneerimine Teie HP mitmefunktsionaalsel seadmel"
+msgid "Vatican"
+msgstr "Vatikan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Paketi \"mtools\" paigaldamine..."
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Teil on rohkem kui 眉ks k玫vaketas, millisele neist paigaldate Linuxi?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "SANE pakettide paigaldamine..."
+msgid "Boot ISO"
+msgstr "Alglaadimis-ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "HPOJ pakettide paigaldamine..."
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Kas Teie printer on mitmefunktsionaalne HP v玫i Sony toode (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100) v玫i vahest HP "
-"PhotoSmart ehk siis HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Eemalda loend"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Sisestama peab k盲surea!"
+msgid "A customizable environment"
+msgstr "Kohandatav t枚枚keskkond"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Command line"
-msgstr "K盲surida"
+msgid "Inuktitut"
+msgstr "Inuktituti"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr "Siin saate m盲盲rata printeri asemele suvalise k盲surea."
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "T枚枚 toru kaudu k盲suks"
+msgid "Which printer model do you have?"
+msgstr "Milline on Teie printeri mudel?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Tuvastati mudel: %s %s"
+msgid "Add a new printer"
+msgstr "Lisa uus printer"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Sisestama peab sobiva URI!"
+msgid " All of your selected data have been "
+msgstr " K玫ik valitud andmed on "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Printeri seadme URI"
+msgid "<-- Delete"
+msgstr "<-- Kustuta"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Siin saab m盲盲rata konkreetselt URI printerile ligip盲盲suks. URI peab j盲rgima "
-"CUPSi v玫i Foomaticu spetsifikatsiooni. Pange t盲hele, et mitte k玫ik spuulerid "
-"ei toeta k玫iki URI t眉眉pe."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Printeri masinanimi v玫i IP"
+msgid "chunk size"
+msgstr "眉hiku suurus"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Pordi number peab olema t盲isarv!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "suvandeid enne laadimist ja 'c' veel enam."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Printeri masinanimi v玫i IP puudub!"
+msgid "Problems installing package %s"
+msgstr "Probleemid paketi %s paigaldamisel"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Et kasutada TCP/Socket printerit, tuleb m盲盲rata printeri masinanimi v玫i IP "
-"ning kui teate, ka pordi number (vaikimisi on see 9100). HP JetDirect "
-"serveritel on pordi number tavaliselt 9100, teistel serveritel v玫ib see olla "
-"teistsugune. Kontrollige seda oma riistvara k盲siraamatust."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Saate hoiatuse, kui koormus on siin m盲盲ratust suurem"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Valige loendist 眉ks automaatselt tuvastatud printeritest v玫i kirjutage "
-"sisendiv盲ljale masinanimi v玫i IP ja kui teate, ka pordi number (vaikimisi on "
-"see 9100)."
+"\n"
+"\n"
+"Veateate edastamiseks vajutage nupule 'Raport'.\n"
+"See avab veebilehitseja akna aadressil https://drakbug.mandrakesoft.com,\n"
+"kus leiate eest t盲itmist ootava vormi. 脺lal n盲idatud info kantakse\n"
+"serverile 眉le.\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket printeri s盲tted"
+msgid "Add a scanner manually"
+msgstr "Sk盲nneri lisamine k盲sitsi"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Masin \"%s\", port %s"
+msgid "Reload partition table"
+msgstr "Laadi partitsioonitabel uuesti"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", masin \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr ""
+"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Scanning network..."
-msgstr "V玫rgu uurimine..."
+msgid "Search for fonts in installed list"
+msgstr "Fontide otsing paigaldatute loendis"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Printeri automaattuvastus"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Kohtv玫rgu l玫pus ei seisa '0', visatakse minema."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP j盲rjekorra nimi puudub!"
+msgid "Boot"
+msgstr "Alglaadimine"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP serveri nimi puudub!"
+msgid "Tuner type:"
+msgstr "Tuuneri t眉眉p:"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Tr眉kij盲rjekorra nimi"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Siin saate valida oma arvutile tr眉kkimiss眉steemi. Teised "
+"operatsioonis眉steemid\n"
+"v玫ivad Teile pakkuda vaid 眉ht s眉steemi, kuid Mandrake Linuxi puhul saate\n"
+"valida tervelt kahe seast.\n"
+"\n"
+" * \"%s\" - mis t盲hendab ``tr眉ki kohe'' (``print, don't queue'') - tuleks "
+"valida siis,\n"
+"kui Teil on printeriga otse眉hendus, Te ei soovi n盲ha mingeid j盲rjekordi ja "
+"Teil\n"
+"ei ole v玫rgus asuvaid printereid. V玫rkude puhul on \"%s\" m玫nev玫rra aeglane "
+"ja\n"
+"tal v玫ib esineda tegutsemisraskusi. Kui see on Teie esimene retk GNU/Linuxi\n"
+"maailma, valige \"pdq\".\n"
+"\n"
+" * \"%s\" - ``tavaline UNIXi tr眉kkimiss眉steem'' (``Common Unix Printing\n"
+"System'') - on hiilgav valik tr眉kkimiseks Teie kohalikul printeril ja veel "
+"nii pooles\n"
+"maailmas. See on lihtne s眉steem, mis v玫ib olla nii kliendiks kui serveriks "
+"iidsele\n"
+"tr眉kkimiss眉steemile \"lpd\". See on ka 眉hilduv varasemate s眉steemidega.\n"
+"suudab teha palju asju, kuid p玫hitegutsemine on sama lihtne kui \"pdq\" "
+"puhul.\n"
+"Kui Teil on vajadus emuleerida \"lpd\"-serverit, tuleb sisse l眉litada\n"
+"\"cups-lpd\"-deemon. \"%s\" pakub ka mitut graafilist kasutajaliidest\n"
+"tr眉kkimiseks v玫i printeri seadistamiseks.\n"
+"\n"
+"Kui leiate hiljem, et siinkohal langetatud valik polnud vahest k玫ige parem,\n"
+"siis saate seda muuta Mandrake juhtimiskeskuses PrinterDrake abil."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Printserver"
+msgid "\"Menu\" key"
+msgstr "\"Men眉眉\"-klahv"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Et kasutada NetWare printerit, peate sisestama NetWare printserveri nime "
-"(NB! See v玫ib olla erinev tema TCP/IP nimest!), samuti tr眉kij盲rjekorra nime "
-"serveril ning kasutajatunnuse ja salas玫na."
+"\n"
+"\n"
+"Kontrollige palun, kas Printerdrake automaattuvastus m盲盲ras Teie printeri "
+"mudeli 玫igesti. Valige loendist 玫ige mudel, kui kursor seisab vale mudeli "
+"v玫i \"toorprinteri\" kohal."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare printeri s盲tted"
+msgid "Security Administrator:"
+msgstr "Turvaadministraator:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Sisestage palun kasutajatunnus"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr "kui on 'jah', kontrollib failide loabitte kasutajate kodukataloogis."
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"脺hendage oma printer Linux-serveri k眉lge ja lubage oma Windowsi masina(te)l "
-"sellega 眉hendust v玫tta kliendina.\n"
-"\n"
-"Kas soovite t玫esti j盲tkata selle printeri seadistamist?"
+"Teil ei ole Interneti眉hendust.\n"
+"Looge see kl玫psuga nupul 'Seadista'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Fontide kopeerimine"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automaatne"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Kas soovite seadistusi proovida?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Seadistage oma Windows-server nii, et printer oleks k盲ttesaadav IPP "
-"protokolliga, ning seadistage tr眉kkimine sellelt masinalt \"%s\" "
-"眉hendust眉眉biga Printerdrakes.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Printer \"%s\" eemaldati edukalt StarOffice/OpenOffice.org/GIMP-ilt."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Asusite seadistama tr眉kkimist Windowsi parooliga kontole. Samba kliendi "
-"arhitektuuri vea t玫ttu pannakse parool tavalise tekstina Samba kliendi "
-"k盲sureale, mida see kasutab tr眉kit枚枚 saatmiseks Windowsi serverile. Seej盲rel "
-"on tolle masina igal kasutajal v玫imalik parooli ekraanil n盲ha n盲iteks k盲suga "
-"\"ps auxwww\".\n"
+"Standardne: see on tavaline turvatase, mida v玫ib soovitada arvutile, mis on "
+"Internetiga\n"
+" 眉hendatud kui klient.\n"
"\n"
-"Soovitame selle asemel kasutada 眉ht alltoodud alternatiividest (igatahes "
-"tuleks teil tagada, et Teie Windowsi serverile p盲盲sevad ligi ainult "
-"kohtv玫rgu masinad; selleks sobib h盲sti kasutada tulem眉眉ri):\n"
+"K玫rge: On juba m玫ningaid piiranguid, igal 枚枚l sooritatakse m盲rksa "
+"rohkem automaatseid kontrollimisi.\n"
"\n"
-"Kasutage Windowsi serveril paroolitut kontot, olgu selleks konto \"GUEST\" "
-"v玫i spetsiaalne tr眉kkimiseks kasutatav konto. 脛rge eemaldage aga "
-"paroolikaitset oma erakontolt ega administraatori kontolt.\n"
+"V盲ga k玫rge: Turvalisus on piisav, et s眉steemi saaks kasutada serverina, mis "
+"v玫ib vastu v玫tta\n"
+" 眉hendusi paljudelt klientidelt. Kui Teie masin on Internetis "
+"vaid kui klient, oleks m玫ttekam\n"
+"\t valida madalam tase.\n"
"\n"
-"Seadistage Windowsi server nii, et printer oleks kasutatav LPD protokolliga. "
-"Seej盲rel seadistage tr眉kkimine Teie masinas Printerdrakes 眉hendusviisiga \"%s"
-"\".\n"
+"Paranoiline: See sarnaneb eelmisele tasemele, ainult et s眉steem on t盲iesti "
+"suletud ja turvas盲tted\n"
+" maksimumi peale keeratud.\n"
"\n"
+"Turvaadministraator:\n"
+" Kui valitud on v玫imalus 'Turvahoiatused', saadetakse "
+"turvahoiatused sellele kasutajale (kasutajanimele\n"
+"\t v玫i e-posti aadressile)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "TURVAHOIATUS!"
+msgid "Save packages selection"
+msgstr "Salvesta paketivalik"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba jagatava printeri nimi puudub!"
+msgid "Remove the last item"
+msgstr "Eemalda viimane element"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Andma peab kas serveri nime v玫i serveri IP!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Taastatav kasutajate loend (olulised on ainult k玫ige uuemad andmed)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Automaatselt tuvastatud"
+msgid "No net boot images created!"
+msgstr "V玫rgu alglaadefaile pole loodud!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "T枚枚grupp"
+msgid "use pptp"
+msgstr "pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Jagatav printer"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Valige, millised teenused tuleks alglaadimisel k盲ivitada"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB serveri IP"
+msgid "Learn how to use this printer"
+msgstr "Printeri kasutama 玫ppimine"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB serveri nimi"
+msgid "Configure the network now"
+msgstr "Seadistada v玫rk otsekohe"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Kui soovitud printer tuvastati automaatselt, valige see loendist ning "
-"lisage siis vajadusel kasutajatunnus, parool ja/v玫i t枚枚grupp."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Valige peegel, millelt lugeda pakettide nimekiri"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Et tr眉kkida SMB printeril, peate andma vastava serveri SMB nime\n"
-"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja v玫ib-olla ka\n"
-"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
-"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salas玫na ja t枚枚grupi."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printeri s盲tted"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Printer \"%s\" serveril \"%s\""
+"FAT-partitsiooni suurust ei 玫nnestunud muuta, \n"
+"ilmnes selline viga: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", printer \"%s\" serveril \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "Millisele sektorile soovite seda 眉mber paigutada?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "V玫rguprinteri nimi puudub!"
+msgid "Do you want to click on this button?"
+msgstr "Kas soovite sellel nupul kl玫psata?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Kaugarvuti nimi puudub!"
+msgid "Bahamas"
+msgstr "Bahama saared"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "V玫rguprinteri nimi"
+msgid "Manual configuration"
+msgstr "K盲sitsiseadistamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Kaugarvuti nimi"
+msgid "search"
+msgstr "otsing"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Et kasutada teise masina lpd printerit, peate sisestama printserveri nime ja "
-"serveril kasutatava printeri nime."
+"See pakett laeb s眉steemi k盲ivitumisel klaviatuuripaigutuse vastavalt\n"
+"failis /etc/sysconfig/keyboard kirjeldatule. V盲he on juhtumeid, kus\n"
+"seda teenust vaja ei l盲heks."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "V玫rguprinteri (lpd) s盲tted"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (paigalduse kuvadraiver)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "K盲sitsiseadistamine"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zeroconfi masina nimi ei tohi sisaldada punkti (.)"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Printeri/seadme valimine/sisestamine on kohustuslik!"
+msgid ""
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
+msgstr "Syslog-i kaudu toimub s眉steemis toimiva logimine. Vajalik!"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (paralleelpordid: /dev/lp0, /dev/lp1..., millele teistes s眉steemides vastab "
-"LPT1:, LPT2:...; esimene USB printer: /dev/usb/lp0, teine USB printer: /dev/"
-"usb/lp1...)"
+msgid "Unknown/Others"
+msgstr "Tundmatu/Muu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Valige palun port, kuhu Teie printer on 眉hendatud."
+msgid "No TV Card detected!"
+msgstr "TV-kaarti ei leitud!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Valige palun port, kuhu printer on 眉hendatud, v玫i kirjutage sisendireale "
-"seadmenimi/failinimi"
+msgid "Options"
+msgstr "Eelistused"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Valige palun printer, kuhu tuleks saata tr眉kit枚枚d."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Printer \"%s\" on m盲盲ratud vaikeprinteriks."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Valige palun printer, mida soovite rakendada. Printeri seadistused peaksid "
-"toimima t盲iesti automaatselt. Kui printer tuvastati valesti v玫i Te eelistate "
-"selle seadistusi korrigeerida, l眉litage sisse \"K盲sitsiseadistamine\"."
+"Asusite seadistama OKI laserprinterit (winprinter). Need\n"
+"kasutavad v盲ga omap盲rast sideprotokolli ja t枚枚tavad seep盲rast ainult "
+"esimeses paralleelpordis. Kui Teie printer on 眉hendatud m玫nda muusse porti "
+"v玫i printserveriga, 眉hendage palun see esimese paralleelpordiga, enne kui "
+"tr眉kite testlehek眉lje. Vastasel juhul printer lihtsalt ei t枚枚ta ja draiver "
+"eirab Teie m盲盲ratud 眉hendusviisi."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Nimekiri k玫igist automaatselt tuvastatud printeritest. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "CPU p玫lvkond (nt 8, kui on PentiumIII, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Praegu ei ole 眉htegi teist v玫imalust"
+msgid "Auto-detected"
+msgstr "Automaatselt tuvastatud"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Printeri seadistused peaksid toimima t盲iesti automaatselt. Kui printer "
-"tuvastati valesti v玫i Te eelistate seadistusi korrigeerida, l眉litage sisse "
-"\"K盲sitsiseadistamine\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "See printer tuvastati automaatselt. "
+"N眉眉d on Teil v玫imalik seadistada oma arvuti paigaldamaks PXE serverit DHCP "
+"serveri \n"
+"ja TFTP serveri rollis, et luua paigaldusserver.\n"
+"Selle v玫imaluse abil saavad teised Teie kohtv玫rgu arvutid kasutada seda "
+"masinat endale s眉steemi paigaldamiseks.\n"
+"\n"
+"Kontrollige enne j盲tkamist, et olete seadistanud oma v玫rgu/Interneti眉henduse "
+"drakconnecti abil.\n"
+"\n"
+"M盲rkus: kohtv玫rgu (LAN) jaoks on vajalik eraldi v玫rgukaardi olemasolu."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Valige palun printer, kuhu tr眉kit枚枚d tuleks saata, v玫i kirjutage "
-"sisendireale seadmenimi/failinimi"
+"Ruumi 1MB-se alglaadimisala loomiseks napib! Paigaldus j盲tkub, kuid s眉steemi "
+"alglaadimiseks tuleb Teil luua DiskDrake abil alglaadimisala"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12247,1086 +12151,779 @@ msgstr ""
"Valige palun printer, mida soovite seadistada, v玫i kirjutage sisendireale "
"seadmenimi/failinimi"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Soovi korral v玫ite ka sisendireal m盲盲rata seadmenime/failinime"
+msgid "Refuse"
+msgstr "Keeldun"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Kui see ei ole printer, mida soovite seadistada, kirjutage sisendireale "
-"seadmenimi/failinimi"
+"HardDrake kontrollib riistvara ja lisav玫imalusena ka seadistab\n"
+"uue v玫i muudetud riistvara."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Saadaolevad printerid"
+msgid "Remote Printers"
+msgstr "V玫rguprinterid"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Printerit ei leitud!"
+msgid "Creating and formatting file %s"
+msgstr "Faili %s loomine ja vormindamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Seadme- v玫i failinime sisestamine on kohustuslik!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "kui on 'jah', kontrollib sgid-failide lisamist/eemaldamist."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Kohalikku printerit ei leitud! Printeri paigaldamiseks k盲sitsi m盲rkige "
-"sisendireale seadmenimi/failinimi (paralleelpordid: /dev/lp0, /dev/lp1..., "
-"mille vasteks teistes s眉steemides on LPT1, LPT2...; esimene USB printer: /"
-"dev/usb/lp0, teine USB printer: /dev/usb/lp1...)"
+"HP LaserJet 1000 vajab p盲rast sissel眉litamist p眉sivara laadimist. Laadige HP "
+"veebilehek眉ljelt alla Windowsi draiveripakett (p眉sivara printeri CD-l ei "
+"toimi) ning pakkige p眉sivarafail lahti, kasutades 'unzip' utiliiti ning "
+"otsides faili 'sihp1000.img'. Kopeerige fail kataloogi '/etc/printer'. Seal "
+"suudab automaatne laadimisskript selle 眉les leida ja laadida iga kord, kui "
+"printer on 眉hendatud ja sisse l眉litatud.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Kohalik printer"
+msgid "Choose an existing LVM to add to"
+msgstr "Vali olemasolev LVM, millele lisada"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB printer \\#%s"
+msgid "xfs restart"
+msgstr "xfs taask盲ivitamine"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Printer paralleelpordis \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Printer \"%s\" on juba olemas,\n"
+"kas t玫esti kirjutada selle s盲tted 眉le?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Printer \"%s\" SMB/Windows serveril \"%s\""
+msgid "No partition available"
+msgstr "Ei leia partitsioone"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "V玫rguprinter \"%s\", port %s"
+msgid "Use the scanners on hosts: "
+msgstr "Sk盲nnerite kasutamine masinatel:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "Tuvastati %s"
+msgid "Unselected All"
+msgstr "T眉hista k玫igi valimine"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", printer \"%s\" SMB/Windows serveril \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Domeeninimede lahendaja"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", v玫rguprinter \"%s\", port %s"
+msgid "Encryption key (again)"
+msgstr "Kr眉ptov玫ti (uuesti)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"脮nnitleme, Teie printer on n眉眉d paigaldatud ja seadistatud!\n"
-"\n"
-"N眉眉d v玫ite tr眉kkida, kasutades rakendustes k盲sku \"Tr眉ki\"\n"
-"(enamasti peitub see men眉眉s \"Fail\").\n"
-"\n"
-"Kuii soovite printerit lisada, eemaldada v玫i 眉mber nimetada v玫i soovite "
-"muuta vaikeseadistusi (tr眉kikvaliteet, paberisalv,...), valige Mandrake "
-"juhtimiskeskuse \"Riistvara\" sektsioonis \"Printer\"."
+msgid "Samba share name missing!"
+msgstr "Samba jagatava printeri nimi puudub!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Microsoft Windowsi masinatega 眉hendatud printerite automaattuvastus"
+msgid "True Type install done"
+msgstr "TrueType paigaldus tehtud"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Kohtv玫rku 眉hendatud printerite automaattuvastus"
+msgid "Detection in progress"
+msgstr "Toimub tuvastamine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Selle masinaga 眉hendatud printerite automaattuvastus"
+msgid "Build Whole Kernel -->"
+msgstr "Loo terve kernel -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "See ongi %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Pange palun moodulite uuendamise flopi seadmesse %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "K盲ivituslogo"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"Teie s眉steemiga on 眉hendatud\n"
"\n"
-"Printeri seadistamise n玫ustaja\n"
-"\n"
-"N玫ustaja aitab Teil paigaldada printeri(d), mis on 眉hendatud selle "
-"arvutiga.\n"
-"\n"
-"Kui teil on printer(eid), mis on 眉hendatud selle masinaga, 眉hendage palun "
-"see/need arvutiga ja l眉litage sisse, et seda/neid saaks automaatselt "
-"tuvastada.\n"
-"\n"
-"Kui olete valmis, vajutage \"J盲rgmine\", v玫i \"Katkesta\", kui Te ei soovi "
-"praegu printeri(te) seadistamisega tegelda."
+"%s%s\n"
+"printer"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Printeri seadistamise n玫ustaja\n"
-"\n"
-"N玫ustaja aitab Teil paigaldada printeri(d), mis on 眉hendatud selle arvutiga "
-"v玫i otse v玫rku.\n"
-"\n"
-"Kui Teil on printer(eid), mis on 眉hendatud selle masinaga, 眉hendage palun "
-"see/need arvutiga ja l眉litage sisse, et seda/neid saaks automaatselt "
-"tuvastada. Ka v玫rguprinter(id) peavad olema 眉hendatud ja sisse l眉litatud.\n"
-"\n"
-"Pange t盲hele, et v玫rguprinterite automaattuvastus v玫tab rohkem aega kui "
-"ainult selle masinaga 眉hendatud printeri(te) automaatne tuvastamine. Nii et "
-"kui te seda ei vaja, l眉litage v玫rguprinterite automaattuvastus v盲lja.\n"
-"\n"
-"Kui olete valmis, vajutage \"J盲rgmine\", v玫i \"Katkesta\", kui Te ei soovi "
-"praegu printeri(te) seadistamisega tegelda."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Printeri jagamine masinal/v玫rgus:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Printeri seadistamise n玫ustaja\n"
-"\n"
-"N玫ustaja aitab Teil paigaldada printeri(d), mis on 眉hendatud selle arvutiga, "
-"otse v玫rku v玫i v玫rgus asuva Windowsi masinaga.\n"
-"\n"
-"Kui Teil on printer(eid), mis on 眉hendatud selle masinaga, 眉hendage see/need "
-"palun arvutiga ja l眉litage sisse, et seda/neid oleks v玫imalik automaatselt "
-"tuvastada. Ka v玫rguprinter(id) ja Windowsi-masinad peavad olema 眉hendatud ja "
-"sisse l眉litatud.\n"
-"\n"
-"Pange t盲hele, et v玫rguprinteri(te) automaattuvastus v玫tab rohkem aega kui "
-"ainult selle masinaga 眉hendatud printeri(te) tuvastamine. Nii et kui teil "
-"seda vaja ei ole, l眉litage v玫rgus ja/v玫i Windowsi taga olevate printeri(te) "
-"automaattuvastus v盲lja.\n"
-"\n"
-"Kui olete valmis, vajutage \"J盲rgmine\", v玫i \"Katkesta\", kui Te ei soovi "
-"printeri(te) seadistamisega praegu tegelda."
+"K盲sk \"%s\" v玫imaldab muuta ka konkreetse tr眉kkimist枚枚 valikuid. Selleks "
+"lisage vaid soovitud valik k盲sureale, nt \"%s <fail>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Printeri seadistamise n玫ustaja\n"
-"\n"
-"N玫ustaja v玫imaldab Teile paigaldada kohalikke v玫i v玫rguprintereid, mida saab "
-"kasutada Teie masin, samuti teised v玫rgus olevad masinad.\n"
-"\n"
-"Teil palutakse m盲盲rata kogu vajalik info printeri seadistamiseks, see "
-"t盲hendab olemasolevad printeridraiverid, draiveri valikud ja printeri "
-"眉hendusviis."
+"M玫nel juhul vajab %s juhtprogramm t枚枚ks lisainformatsiooni,\n"
+"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
+"m盲盲rata v玫i lasta juhtprogrammil ise Teie arvutit kompida? V玫ib juhtuda,\n"
+"et see viib arvuti segadusse, kuid ei tohiks mingit j盲盲vat kahju teha."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "CD nimi pole korrektne. Ketta nimi on %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Interneti眉henduse jagamise n玫ustaja\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake ei suutnud m盲盲rata Teie printeri %s mudelit. Valige palun 玫ige "
-"mudel nimekirjast."
+"Kl玫psake n玫ustaja k盲ivitamiseks nupul 'Seadista'."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Kuuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " masinal "
+msgid "Searching for new printers..."
+msgstr "Uute printerite otsimine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Printeri seadistamine..."
+msgid " (multi-session)"
+msgstr " (mitmeseansiline)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Uute printerite otsimine..."
+msgid "Kernel Boot Timeout"
+msgstr "Ajapiirang kerneli laadimisel"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"M脛RKUS: S玫ltuvalt printeri mudelist ja tr眉kkimiss眉steemist paigaldatakse "
-"kuni %d MB lisatarkvara."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Kas olete ikka kindel, et soovite seadistada tr眉kkimist sellel masinal?\n"
+"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
+"XFree %s toetab Teie videokaarti ja v玫ib omada paremat 2D tuge."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Kas soovite tr眉kkimist lubada 眉lalmainitud printeritel?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX kettajagamise n玫ustaja leidis sellised lahendused:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Kas soovite tr眉kkimist lubada printeritel Teie kohtv玫rgus?\n"
+msgid "Hungarian"
+msgstr "Ungari"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Kas soovite tr眉kkimist lubada 眉lalmainitud printeritel v玫i printeritel Teie "
-"kohtv玫rgus?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Kontrollige, et k玫ik printerid on 眉hendatud ja sisse l眉litatud).\n"
+"Valige oma teenusepakkuja.\n"
+"Kui see ei ole nimekirjas, valige 'Tundmatu'."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Ei leitud 眉htegi printerit, mis oleks masinaga otse 眉hendatud"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Aja automaatne s眉nkroniseerimine (NTP abil)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"%d tundmatut printerit on Teie s眉steemi otse 眉hendatud"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"脺ks tundmatu printer on Teie s眉steemi otse 眉hendatud"
+msgid "LDAP Server"
+msgstr "LDAP server"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Teie s眉steemiga on 眉hendatud\n"
-"\n"
-"%s%s\n"
-"printer"
+"PCMCIA tugi on tavaliselt vajalik s眉learvutitele v玫rgu- ja\n"
+"modemiliideste lisamiseks."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Teie s眉steemiga on 眉hendatud\n"
-"\n"
-"%s%s\n"
-"printer(id)"
+msgid "Choose your country"
+msgstr "Valige riik"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Teie s眉steemiga on 眉hendatud\n"
"\n"
-"%s%s\n"
-"printerid"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "ja %d tundmatut printerit"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "ja 眉ks tundmatu printer"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "S眉steemi kontrollimine..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "CUPSi taask盲ivitamine..."
+"- s眉steemsed failid:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "See server on juba nimekirjas ja seda ei ole v玫imalik uuesti lisada.\n"
+msgid "Standalone Tools"
+msgstr "Autonoomsed vahendid"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Korrektne IP aadress on n盲iteks:\n"
+msgid "Where"
+msgstr "Kus"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Sisestatud IP aadress ei ole korrektne.\n"
+msgid "but not matching"
+msgstr "aga ei sobi"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Serveri IP puudub!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Siin saate valida alternatiivse juhtprogrammi (OSS v玫i ALSA) oma "
+"helikaardile (%s)."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Kui porti ei ole m盲盲ratud, kasutatakse vaikimisi porti 631."
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA kaartide seadmine..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Sisestage serveri IP aadress ja prot, mille printereid soovite kasutada."
+msgid "kdesu missing"
+msgstr "kdesu puudub"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Ligip盲盲s printeritele CUPS printserveril"
+msgid "Encryption key"
+msgstr "Kr眉ptov玫ti"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Valitud serveri eemaldamine"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Edit selected server"
-msgstr "Valitud serveri muutmine"
+msgid "Christmas Island"
+msgstr "J玫ulusaar"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add server"
-msgstr "Serveri lisamine"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Alglaaduri paigaldamine eba玫nnestus. Tekkis j盲rgmine viga:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Lisage siia CUPS serverid, mille printereid soovite kasutada. Seda tuleb "
-"teha ainult siis, kui serverid ei saada oma printeri(te) infot 眉ldleviga "
-"kohtv玫rku."
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI kanal"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "Masina/v玫rgu IP aadress:"
+msgid "Set this printer as the default"
+msgstr "M盲盲ra vaikeprinteriks"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"See masin/v玫rk on juba nimekirjas ja seda ei ole v玫imalik uuesti lisada.\n"
+msgid "partition %s"
+msgstr "partitsioon %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Sisestatud masina/v玫rgu IP aadress ei ole korrektne.\n"
+msgid "Paranoid"
+msgstr "Paranoiline"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Masina/v玫rgu IP aadress puudub."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Valige palun v玫rk v玫i masin, mille jaoks soovite siinseid printereid v盲lja "
-"jagada."
+msgid "<-- Del User"
+msgstr "<-- Kustuta kasutaja"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Printerite jagamine"
+msgid "Location on the bus"
+msgstr "Asukoht siinil"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Eemalda valitud masin/v玫rk"
+msgid "No printer found!"
+msgstr "Printerit ei leitud!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Muuda valitud masinat/v玫rku"
+msgid "the vendor name of the device"
+msgstr "seadme tootja nimi"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Lisa masin/v玫rk"
+msgid "Erase entire disk"
+msgstr "T眉hjenda kogu ketas"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Nende masinate ja v玫rkude jaoks on selle arvuti k眉ljes olevad printerid "
-"k盲ttesaadavaks tehtud:"
+msgid " (Default)"
+msgstr " (Vaikimisi)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Kui see on sisse l眉litatud, konrollitakse CUPSi igal k盲ivitamisel "
-"automaatselt, et\n"
-"\n"
-"- kui LPD/LPRng on paigaldatud, ei kirjutaks CUPS 眉le faili /etc/printcap\n"
-"\n"
-"- kui /etc/cups/cupsd.conf puudub, see loodaks\n"
-"\n"
-"- kui printeriinfo l盲heb 眉ldlevisse, ei ole seal serveri nimeks \"localhost"
-"\".\n"
+"Argumendid: ()\n"
"\n"
-"Kui m玫ni neist sammudest tekitab probleeme, l眉litage v玫imalus v盲lja, aga "
-"siis peate nende eest ise hoolt kandma."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "CUPS-i automaatne seadistamine"
+"Kui SERVER_LEVEL (v玫i selle puudumisel SECURE_LEVEL) failis \n"
+"/etc/security/msec/security.conf on suurem kui 3, loob s眉mbolviida \n"
+"/etc/security/msec/server, mis osutab failile \n"
+"/etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/server on \n"
+"fail, mida chkconfig --add kasutab otsustamaks, kas lisada teenus v玫i \n"
+"mitte, kui see on pakettide paigaldamise ajal failis olemas."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Selle lubamine v玫imaldab tr眉kkida jaapanikeelseid tekstifaile. Kasutage seda "
-"ainult siis, kui soovite t玫esti jaapanikeelseid tekste tr眉kkida, sest kui "
-"see on sisse l眉litatud, ei ole enam v玫imalik tr眉kkida ladina t盲hestiku "
-"diakriitiliste m盲rkidega t盲hti ega kohandada veeriseid, m盲rgisuurust jne. "
-"See puudutab ainult k盲esoleva masinaga 眉hendatud printereid. Kui soovite "
-"tr眉kkida jaapanikeelset teksti v玫rgus asuva masinaga 眉hendatud printeril, "
-"tuleb see funktsioon tollel masinal sisse l眉litada."
+msgid "Automatic reconfiguration"
+msgstr "Automaatne 眉mberseadistamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Jaapani teksti tr眉kkimisresiim"
+msgid "Receiving Speed:"
+msgstr "Saamise kiirus:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Juurdep盲盲su saamiseks CUPS serverite printeritele Teie kohtv玫rgus tuleb vaid "
-"盲ra m盲rkida v玫imalus \"Otsi automaatselt k玫iki k盲ttesaadavaid v玫rguprintereid"
-"\". CUPS serverid annavad Teie masinale automaatselt teada oma printeritest. "
-"K玫ik Teie masinale parajasti k盲ttesaadavad printerid on n盲idatud "
-"Printerdrake peaakna sektsioonis \"V玫rguprinterid\". Kui CUPS server(id) ei "
-"asu kohtv玫rgus, tuleb nende kohta info hankimiseks sisestada IP aadress(id) "
-"ning v玫imaluse/vajaduse korral ka pordi number."
+msgid "Turks and Caicos Islands"
+msgstr "Turks ja Caicos"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Puudub"
+msgid "permissions"
+msgstr "loabitid"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "T盲iendavad CUPS serverid: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Ainult sellel masinal"
+msgid "<- Previous"
+msgstr "<- Eelmine"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "Kohandatud s盲tted"
+msgid "Internet Connection Sharing configuration"
+msgstr "Interneti眉henduse jagamise seadistamine"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printeri jagamine masinal/v玫rgus:"
+msgid "Toggle between flat and group sorted"
+msgstr "Sorteeritud v玫i sorteerimata"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Otsi automaatselt k玫iki k盲ttesaadavaid v玫rguprintereid"
+msgid "Themes"
+msgstr "Teemad"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Selle arvuti k眉lge 眉hendatud printerid on teistele k盲ttesaadavad"
+msgid "Options: %s"
+msgstr "Eelistused: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Samuti saate otsustada, kas v玫rguprinterid peaksid olema automaatselt siin "
-"arvutis k盲ttesaadavad"
+"Praegu on Teil alglaadimise haldurina kasutusel %s.\n"
+"Valige seadistamisn玫ustaja k盲ivitamiseks 'Seadista'."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Siin saate valida millised selle arvuti k眉lge kinnitatud printerid peaksid "
-"olema k盲ttesaadavad ka teistele kohtv玫rgu arvutitele ja millistele nende "
-"hulgast."
+msgid "OKI winprinter configuration"
+msgstr "OKI winprinteri s盲tted"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS printeri s盲tted"
+msgid "Saint Helena"
+msgstr "Saint Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Printeri automaattuvastus (kohalikud, TCP/Socketi ja SMB printerid)"
+msgid "Security Level"
+msgstr "Turvatase"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"M玫ned sammud ei ole l玫pule viidud.\n"
"\n"
-"Kui v玫rgus on CUPS server, siis ei ole Teil vaja siin printereid seadistada, "
-"need leitakse automaatselt."
+"Kas soovite t玫esti praegu l玫petada ja v盲ljuda?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Kuidas on see printer 眉hendatud?"
+msgid "Sudan"
+msgstr "Sudaan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Valige printeri 眉hendusviis"
+msgid "Polish (qwertz layout)"
+msgstr "Poola (QWERTZ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"HP LaserJet 1000 vajab p盲rast sissel眉litamist p眉sivara laadimist. Laadige HP "
-"veebilehek眉ljelt alla Windowsi draiveripakett (p眉sivara printeri CD-l ei "
-"toimi) ning pakkige p眉sivarafail lahti, kasutades 'unzip' utiliiti ning "
-"otsides faili 'sihp1000.img'. Kopeerige fail kataloogi '/etc/printer'. Seal "
-"suudab automaatne laadimisskriot selle 眉les leida ja laadida iga kord, kui "
-"printer on 眉hendatud ja sisse l眉litatud.\n"
+msgid "Syria"
+msgstr "S眉眉ria"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Argumendid: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"M盲盲rab kasutaja umask-i."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Argumendid: (val)\n"
+"Tere tulemast! Laadimisel aitab Teid %s!\n"
+"\n"
+"Valige nimekirjast eelistatav OS,\n"
+"vaikimisi oodake %d sekundit.\n"
"\n"
-"M盲盲rab shelli aegumise. Null t盲hendab aegumise puudumist."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Argumendid: (size)\n"
-"\n"
-"M盲盲rab shellik盲skude ajaloo suuruse. -1 t盲hendab piiramatu."
+msgid "Portuguese"
+msgstr "Portugali"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "kui on 'jah', kontrollib sgid-failide lisamist/eemaldamist."
+msgid "Loopback file name: "
+msgstr "Loopback faili nimi:"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "kui on 'jah', kontrollib avatud porte."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Nimeserveri aadress peab olema kujul 1.2.3.4"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"kui on lubatud, saadab meiliraporti sellele aadressile, muidu "
-"administraatorile."
+msgid "Serbia"
+msgstr "Serbia"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "kui on 'jah', annab kontrolli tulemustest teada meilitsi."
+msgid "Newzealand"
+msgstr "Uus-Meremaa"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "kui on 'jah', kontrollib k玫igi kirjutatavaid faile/katalooge."
+msgid "This directory should remain within the root filesystem"
+msgstr "See kataloog peab j盲盲ma kokku juurfailis眉steemiga"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "kui on 'jah', saadab kontrolli tulemused tty-sse."
+msgid "CapsLock key"
+msgstr "CapsLock-klahv"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "kui on 'jah', kontrollib veidi rpm andmebaasist."
+msgid "Install bootloader"
+msgstr "Alglaaduri s盲tted"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "kui on 'jah', kontrollib, kas v玫rguseadmed on mitte-eelisresiimis."
+msgid "Select the memory size of your graphics card"
+msgstr "Valige graafikam盲lu suurus"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "kui on 'jah', k盲ivitab chkrootkit kontrolli."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
+msgstr ""
+"[V脮TMED]\n"
+"Kohtv玫rgu ja Interneti 眉henduse ja j盲lgimise rakendus\n"
+"\n"
+"--defaultintf liides : n盲idab vaikimis antud liidest\n"
+"--connect : 眉hendab Internetiga, kui ei ole veel 眉hendust\n"
+"--disconnect : lahutab Internetist, kui on juba 眉hendus\n"
+"--force : koos v玫tmega (dis)connect : sunni 眉hendama/lahutama\n"
+"--status : vastuseks 1, kui on 眉hendatud, muul juhul 0 ja v盲ljumine.\n"
+"--quiet : l眉litab v盲lja interaktiivsuse. Koos v玫tmega (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr "kui on 'jah', kontrollib failide loabitte kasutajate kodukataloogis."
+msgid "Dynamic IP Address Pool:"
+msgstr "D眉naamiline IP-aadresside vahemik:"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "kui on 'jah', kontrollib suid root failide lisamist/eemaldamist."
+msgid "LVM name?"
+msgstr "LVM nimi?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "kui on 'jah', saadab kontrolli tulemused syslog-i."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "M玫ned seadmed riistvaraklassis \"%s\" eemaldati:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"kui on 'jah', kontrollib t眉hja salas玫na /etc/shadow-s ning kasutajaid id-ga "
-"0, kes pole aga administraatorid."
+msgid "Found %s %s interfaces"
+msgstr "Leiti %s %s liidest"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "kui on 'jah', sooritab igap盲evase turvakontrolli."
+msgid "sticky-bit"
+msgstr "kleepumisbitt"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "kui on 'jah', kontrollib suid/sgid failide checksum-i."
+msgid "Post Install"
+msgstr "Paigaldusj盲rgsed seadistused"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "kui on 'jah', kontrollib t眉hja salas玫na /etc/shadow-s."
+msgid "The internal domain name"
+msgstr "Sisemine domeeninimi"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "kui on 'jah', teatab omanikuta failidest."
+msgid "Card IRQ"
+msgstr "Kaardi IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
"Argumendid: (umask)\n"
"\n"
-"M盲盲rab administraatori umask-i."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Argumendid: (length, ndigits=0, nupper=0)\n"
-"\n"
-"M盲盲rab salas玫na minimaalse pikkuse ning numbrite ja suurt盲htede minimaalse "
-"hulga."
+"M盲盲rab kasutaja umask-i."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"M盲盲rab salas玫na ajaloo suuruse, et v盲ltida selle taaskasutamist."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Argumendid: (max, inactive=-1)\n"
-"\n"
-"M盲盲rab salas玫na aeguma \\fImaks.\\fP n p盲eva p盲rast ning viivituse enne "
-"muutmist \\fImittekehtivaks\\fP."
+"Fontide importimise ja j盲lgimise "
+"rakendus \n"
+"--windows_import : impordib k玫igilt saadaolevailt windowsi "
+"partitsioonidelt.\n"
+"--xls_fonts : n盲itab k玫iki fonte, mis on juba saadud xls-ist.\n"
+"--strong : fontide tugev verifitseerimine.\n"
+"--install : paigaldada iga fondifail ja kataloog.\n"
+"--uninstall : eemaldada iga font v玫i fondikataloog.\n"
+"--replace : asendada k玫ik fondid, kui on juba olemas.\n"
+"--application : 0 mitte 眉kski rakendus.\n"
+" : 1 iga toetatud ja saadaolev rakendus.\n"
+" : rakenduse_nimi n盲iteks so StarOffice'i \n"
+" : ja gs GhostScripti puhul."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Argumendid: (name)\n"
-"\n"
-"Lisab nime erandite hulka, kui msec uurib salas玫nade aegumist."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-" sulogin(8) lubamine/keelamine 眉ksikkasutaja tasemel."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Valige flopiseade, mida kasutada alglaadimisketta tegemiseks"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-" Aktiveerib/keelab igap盲evase turvakontrolli."
+msgid "LILO with text menu"
+msgstr "LiLo tekstiresiimis"
-#: ../../security/help.pm:1
+#
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Aktiveerib/keelab v玫rgukaardi mitte-eelisoleku kontrolli."
+msgid "Everything (no firewall)"
+msgstr "K玫ik (tulem眉眉r puudub)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Salas玫na kasutamine kasutajate autentimiseks."
+msgid "You must specify a kernel image"
+msgstr "Teil peab olema kerneli laadepilt"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-" su lubamine ainult grupi wheel liikmetele v玫i su lubamine igale kasutajale."
+msgid ", multi-function device on USB"
+msgstr ", mitme funktsiooniga seade USB-l"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Msec igatunnise turvakontrolli lubamine/keelamine."
+msgid "Do"
+msgstr "Tee 盲ra"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Ipv4 veidrate pakettide logimise lubamine/keelamine."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Proovin lugeda peeglilt pakettide nimekirja..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Libsafe lubamine/keelamine, kui see s眉steemist leitakse."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Leedu AZERTY (vanem)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Argumendid: (arg, alert=1)\n"
-"\n"
-"IP v玫ltsimiskaitse lubamine/keelamine."
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiilia (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Argumendid: (arg, alert=1)\n"
-"\n"
-"Nimelahenduse v玫ltsimiskaitse lubamine/keelamine. Kui\n"
-"\\fIalert\\fP on t玫ese v盲盲rtusega, saadab ka raporti syslog-i."
+msgid "IP address of host/network:"
+msgstr "Masina/v玫rgu IP aadress:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Argumendid: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Syslog-i raportite lubamine/keelamine konsoolile 12. \\fIexpr\\fP on \n"
-"avaldis, mis kirjeldab, mida logida (vt l盲hemalt syslog.conf(5)) ja \n"
-"dev seade, kuhu logiraport saata."
+"edenemisriba 眉lemise vasaku\n"
+"nurga y-koordinaat"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Crontab ja at lubamine/keelamine kasutajatele. Lubatud kasutajad "
-"kirjutatakse failidesse /etc/cron.allow ja /etc/at.allow (vt man at(1) ja "
-"crontab(1))."
+msgid "System installation"
+msgstr "S眉steemi paigaldus"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Argumendid: ()\n"
-"\n"
-"Kui SERVER_LEVEL (v玫i selle puudumisel SECURE_LEVEL) failis \n"
-"/etc/security/msec/security.conf on suurem kui 3, loob s眉mbolviida \n"
-"/etc/security/msec/server, mis osutab failile \n"
-"/etc/security/msec/server.<SERVER_LEVEL>. /etc/security/msec/server on \n"
-"fail, mida chkconfig --add kasutab otsustamaks, kas lisada teenus v玫i \n"
-"mitte, kui see on pakettide paigaldamise ajal failis olemas."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent ja Grenadiinid"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Autoriseerib k玫ik teenused, mida kontrollib tcp_wrappers (vt hosts.deny"
-"(5)), \n"
-"kui \\fIarg\\fP = ALL. Ainult kohalikud, kui \\fIarg\\fP = LOCAL ja keelab \n"
-"k玫ik, kui \\fIarg\\fP = NONE. Vajalise teenuste autoriseerimiseks kasutage \n"
-"faili /etc/hosts.allow (vt hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Fail/_Ava"
#: ../../security/help.pm:1
#, c-format
@@ -13341,1080 +12938,821 @@ msgstr ""
"Argument m盲盲rab, kas klientidel on 玫igus v玫tta 眉hendust X-serveriga \n"
"tcp pordis 6000 v玫i mitte."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Argumendid: (arg, listen_tcp=None)\n"
-"\n"
-"Lubab/keelab X-i 眉hendused. Esimene arg m盲盲rab, mida tehakse kliendi \n"
-"poolel: ALL (k玫ik 眉hendused on lubatud), LOCAL (ainult kohalikud \n"
-"眉hendused) ja NONE (眉hendusi ei lubata)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Lubab/keelab kasutajate nimekirja kuvahalduritel (kdm ja gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Lubab/keelab administraatori vahetu sisselogimise."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Lubab/keelab administraatori sisselogimise v玫rgust."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Lubab/keelab konsoolikasutajal taask盲ivituse."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Kui \\fIarg\\fP = ALL, on lubatud nii /etc/issue kui /etc/issue.net. kui \n"
-"\\fIarg\\fP = NONE, ei ole lubatud muud v盲ljundid kui need, mida m盲盲rab \n"
-"/etc/issue."
+msgid "Location of auto_install.cfg file"
+msgstr "Faili auto_install.cfg asukoht"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Lubab/keelab automaatse sisselogimise."
+msgid "Open Firmware Delay"
+msgstr "Open Firmware viivitus"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-" Aktsepteerib/l眉kkab tagasi icmp echo."
+msgid "Hungary"
+msgstr "Ungari"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-" Aktsepteerib/l眉kkab tagasi 眉ldlevi icmp echo."
+msgid "Total progess"
+msgstr "Edenemine kokku"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Argumendid: (arg)\n"
-"\n"
-"Aktsepteerib/l眉kkab tagasi IPv4 v玫ltsveateated."
+msgid "Color configuration"
+msgstr "V盲rvis盲tted"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Turvaadministraator (kasutajatunnus v玫i e-posti aadress)"
+msgid "New Zealand"
+msgstr "Uus-Meremaa"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Teek, mis kaitseb puhvri 眉let盲ite ja vormingustringide r眉nnaku vastu."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Serveritel kasutatakse libsafe'i"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Turvatase"
+"There are already some restrictions, and more automatic checks are run every "
+"night."
+msgstr ""
+"M玫ned piirangud on juba peal ja igal 枚枚l viiakse l盲bi veel hulk automaatseid "
+"kontrollimisi."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Palun valige meelep盲rane turvatase"
+msgid "please choose the date to restore"
+msgstr "valige palun kuup盲ev/aeg, kust taastada"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSeci p玫hiseadistused"
+msgid "Switching from ext2 to ext3"
+msgstr "Ext2 vahetamine ext3 vastu"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"S眉steem on t盲ielikult suletud. V玫rgust kasutamine on v玫imalik ainult\n"
-"spetsiaalselt loodud juurdep盲盲suteid kasutades."
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Sellel turvatasemel v玫ib s眉steemi kasutada Internetis ka serverina.\n"
-" Turvalisus on n眉眉d piisavalt k玫rge, et t枚枚tades serverina v玫ib masin\n"
-"vastu v玫tta ka palju kliente. M盲rkus: kui Teie masin kasutab Internetti\n"
-"ainult kliendina, v玫iks valida madalama taseme."
+msgid "Netherlands Antilles"
+msgstr "Hollandi Antillid"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"M玫ned piirangud on juba peal ja igal 枚枚l viiakse l盲bi veel hulk automaatseid "
-"kontrollimisi."
+msgid "Browse to new restore repository."
+msgstr "Lehitse uut taastamishoidlat."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"See on sobilik turvatase arvutile, mis 眉hendatakse Internetti kui klient."
+"\n"
+"Printeri seadistamise n玫ustaja\n"
+"\n"
+"N玫ustaja v玫imaldab Teile paigaldada kohalikke v玫i v玫rguprintereid, mida saab "
+"kasutada Teie masin, samuti teised v玫rgus olevad masinad.\n"
+"\n"
+"Teil palutakse m盲盲rata kogu vajalik info printeri seadistamiseks, see "
+"t盲hendab olemasolevad printeridraiverid, draiveri valikud ja printeri "
+"眉hendusviis."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salas玫nad on n眉眉d kasutusel, kuid v玫rku 眉hendamine ei ole siiski soovitav."
+msgid "and %d unknown printers"
+msgstr "ja %d tundmatut printerit"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"See tase muudab k眉ll s眉steemi lihtsalt kasutatavaks, kuid v盲ga\n"
-"haavatavaks: ligip盲盲supiirangute puudumise t玫ttu ei peaks arvutit 眉hendama\n"
-"ei teiste arvutitega ega ka mitte Internetti."
+"Varastel Inteli Pentium-kiipidel oli viga ujukomaprotsessoris, mis ei "
+"saavutanud vajalikku t盲psust ujukomajagamist (FDIV) sooritades"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoiline"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "PCI ISDN kaarti ei leitud. Palun valige see j盲rgmisel sammul."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Veel k玫rgem"
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "K玫rge"
+msgid "Please give a user name"
+msgstr "Palun andke kasutajanimi"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "V盲hene"
+msgid "Enable CD Boot?"
+msgstr "CD-lt laadimine lubatud?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Tere tulemast, kr盲kkerid"
+msgid " enter `void' for void entry"
+msgstr " kirjutage t眉hja kirje puhul 'void'"
-# c-format
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Muudatuste aktiveerimiseks k盲ivitage %s uuesti"
+msgid "on Hard Drive"
+msgstr "k玫vakettale"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Palun v盲ljuge ja vajutage siis Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "脺hendus \"Winmodemiga\""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow ja /etc/hosts.deny on juba seadistatud - ei muudeta"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"脮nnitleme, Teie printer on n眉眉d paigaldatud ja seadistatud!\n"
+"\n"
+"N眉眉d v玫ite tr眉kkida, kasutades rakendustes k盲sku \"Tr眉ki\"\n"
+"(enamasti peitub see men眉眉s \"Fail\").\n"
+"\n"
+"Kuii soovite printerit lisada, eemaldada v玫i 眉mber nimetada v玫i soovite "
+"muuta vaikeseadistusi (tr眉kikvaliteet, paberisalv,...), valige Mandrake "
+"juhtimiskeskuse \"Riistvara\" sektsioonis \"Printer\"."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Esmalt tuleb luua /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"M盲盲rab salas玫na ajaloo suuruse, et v盲ltida selle taaskasutamist."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Midagi l盲ks valesti! - Kas mkisofs on ikka paigaldatud?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "N眉眉d v玫ite xawtv t枚枚le panna (X Window keskkonnas!) !\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO-laadefail on %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Saaleala on paigalduseks liiga v盲ike, palun suurendage seda"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Flopiseade ei ole k盲ttesaadav!"
+msgid "%s on %s"
+msgstr "%s asukohas %s"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Flopi v玫ib n眉眉d v盲lja v玫tta"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux kasutab GMT (Greenwichi) aega ning teisendab selle\n"
+"kohalikuks ajaks vastavalt Teie valitud ajav枚枚ndile. Seda v玫ib siiski ka "
+"v盲lja\n"
+"l眉litada, kui j盲tta m盲rkimata \"%s\". Sellisel juhul kajastab\n"
+"arvutikell sama aega, mis s眉steemi kell. See v玫ib olla kasulik, kui masinas "
+"on\n"
+"veel m玫ni operatsioonis眉steem, n盲iteks Windows.\n"
+"\n"
+"V玫imalus \"%s\" v玫imaldab kellaaega reguleerida,\n"
+"眉hendudes Internetis m玫ne ajaserveriga. Pakutavas nimekirjas valige m玫ni\n"
+"l盲hemal asuv server. M玫istagi peab selle v玫imaluse kasutamiseks olema ka\n"
+"Interneti眉hendus. Tegelikult paigaldab see Teie arvutile ajaserveri, mida "
+"saab\n"
+"kasutada isegi teiste kohtv玫rgus olevate masinate aja t盲psustamiseks."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Ei suuda flopit leida!"
+msgid "Which is your timezone?"
+msgstr "Millises ajav枚枚tmes asute?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Sisestage palun flopi:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Salvesta seadistus"
+msgid "The system is now connected to the Internet."
+msgstr "S眉steem on n眉眉d Internetti 眉hendatud."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "D眉naamiline IP-aadresside vahemik:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "L玫una-Georgia ja L玫una-Sandwichi saared"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Enamik v盲盲rtusi on v玫etud Teie t枚枚tavast\n"
-"s眉steemist. V玫ite neid vajadusel muuta."
+msgid "Japan (broadcast)"
+msgstr "Jaapan (tele)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Dhcpd serveri seadistamine"
+msgid "Mozambique"
+msgstr "Mosambiik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "IP vahemiku l玫pp:"
+msgid "Icon"
+msgstr "Ikoon"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "IP vahemiku algus:"
+msgid "Please choose what you want to backup"
+msgstr "Valige palun, mida soovite varundada"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Nimeserverid:"
+msgid "256 colors (8 bits)"
+msgstr "256 v盲rvi (8 bitti)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Domeeninimi:"
+msgid "Read-write"
+msgstr "Read-write"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "脺ldlevi aadress:"
+msgid "Size: %s\n"
+msgstr "Suurus: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Alamv玫rgu mask:"
+msgid "Hostname: "
+msgstr "Masinanimi: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Ruuterid:"
+msgid "Chunk size %s\n"
+msgstr "脺hiku suurus %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "V玫rgumask:"
+msgid "Build the future of Linux!"
+msgstr "Looge ise Linuxi parem tulevik!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Alamv玫rk:"
+msgid "Local Printer"
+msgstr "Kohalik printer"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Muutuste t盲ielikuks j玫ustamiseks tuleb kuvahaldur taask盲ivitada.\n"
-"(k盲surealt: service dm restart)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Dhcpd seadistamine..."
+" Autori玫igus (C) 2001-2002 MandrakeSoft: DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Kustuta klient"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr ""
+"[--file=minufail] [--word=minus玫na] [--explain=regulaaravaldis] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Muuda klienti"
+msgid "ADSL connection"
+msgstr "ADSL 眉hendus"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Lisa klient -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Seadistus puudub, kl玫psake palun nupul N玫ustaja v玫i Muud.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Luba 玫hukesi kliente"
+msgid "Error!"
+msgstr "Viga!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "脮huke Klient"
+msgid "cable connection detected"
+msgstr "leiti kaabli眉hendus"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "V玫rgu alglaadefaile pole loodud!"
+msgid "Permission denied transferring %s to %s"
+msgstr "%s 眉lekandmiseks %s -le puudub luba"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "t眉眉p: %s"
+msgid "/_Report Bug"
+msgstr "/_Vearaport"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Kustuta kasutaja"
+msgid "Resize"
+msgstr "Muuda suurust"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Lisa kasutaja -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! N盲itab, et parool antud s眉steemis erineb sellest, mida teab\n"
-"terminalserver.\n"
-"Palun kustutage ja looge see kasutaja terminalserveris uuesti, et "
-"v玫imaldada\n"
-"sisselogimist."
+msgid "Please enter the device name to use for backup"
+msgstr "Sisestage palun varundamiseks kasutatava seadme nimi"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Kustuta k玫ik v玫rgu alglaadefailid"
+msgid "Resolution: %s\n"
+msgstr "Kuvatihedus: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Kustuta"
+msgid "matching"
+msgstr "sobib"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Selleks kulub p盲ris mitu minutit."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Ligip盲盲s Teie kernelile vastavatele kerneli moodulitele eba玫nnestus (puudub "
+"fail %s), mis enamasti t盲hendab, et Teie alglaadimisflopi ei ole s眉nkroonis "
+"paigaldus-andmekandjaga (palun looge uus alglaadimisflopi)"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Loo k玫ik kernelid -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Palun valige 玫ige port. N盲iteks MS Windowsi \"COM1\" kannab\n"
+"GNU/Linuxis nime \"ttyS0\"."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "V玫rgukaarti pole valitud!"
+msgid "The following packages are going to be removed"
+msgstr "Eemaldamiseks on valitud j盲rgmised paketid"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Loo ainus v玫rgukaart -->"
+msgid "Connect to the Internet"
+msgstr "Loo interneti眉hendus"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Kernelit pole valitud!"
+msgid "Use existing partitions"
+msgstr "Kasuta olemasolevat partitsiooni"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Loo terve kernel -->"
+msgid "Canadian (Quebec)"
+msgstr "Kanada (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Alglaadimis-ISO"
+msgid "Mouse device: %s\n"
+msgstr "Hiire port: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Alglaadimisflopi"
+msgid "Reselect correct fonts"
+msgstr "Korrektsete fontide uuestivalimine"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"Options Description:\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"drakTermServi 眉levaade\n"
-"\t\t\t \n"
-" - Etherboot-suutlike laadepiltide loomine:\n"
-" \t\tKerneli alglaadimiseks etherboodi vahendusel tuleb luua eriline "
-"kernel/initrdrd laadepilt.\n"
-" \t\tSuure osa t枚枚st teeb 盲ra mkinitrd ning drakTermServ on vaid "
-"graafiline\n"
-" \t\tkasutajaliides, aitamaks neid laadepilte hallata ja/v玫i "
-"kohandada.\n"
-"\n"
-" - /etc/dhcpd.conf haldamine:\n"
-" \t\tEt klient saaks teha alglaadimise v玫rgust, vajab iga klient "
-"kirjet failis dhcpd.conf,\n"
-" \t\tmis omistab masinale IP aadressi ja v玫rgulaadepildi. "
-"drakServTerm aitab neid\n"
-" \t\tkirjeid luua/eemaldada.\n"
-"\t\t\t\n"
-" \t\t(PCI kaartidel v玫ib laadepilt puududa - etherboot n玫uab "
-"korrektset laadepilti.\n"
-" \t\tSilmas v玫iks pidada ka seda, et kui etherboot laadepilti ootab, "
-"eeldab ta nime\n"
-" \t\tkujul boot-3c59x.nbi, mitte aga boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t\n"
-" \t\tT眉眉piline dhcpd.conf-i l玫ik, mis toetab kettata t枚枚jaama, n盲eb "
-"v盲lja selline:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t/*type fat;*/\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk.nbi"
-"\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tKuigi v玫ib kasutada ka IP aadresside valimikku, selle asemel et "
-"m盲盲rata igale\n"
-"\t\t\tkliendi masinale eraldi kirje, v玫imaldab fikseeritud aadress "
-"kasutamine siiski\n"
-"\t\t\tpruukida ClusterNFS pakutavaid kliendikeskseid seadistustefaile.\n"
-"\t\t\t\n"
-"\t\t\tM盲rkus: kirjet \"/*type\" kasutab ainult drakTermServ. Kliendid "
-"v玫ivad olla \n"
-"\t\t\tkas \"thin\"*/ v玫i 'fat'. \"脮huke\" klient kasutab enamikku tarkvara "
-"serveril xdmcp\n"
-"\t\t\tvahendusel, \"paksud\" kliendid aga jooksutavad takrvara enamasti "
-"kliendi\n"
-"\t\t\tmasinal. 脮hukeste klientide jaoks kirjutatakse eraldi inittab-fail\n"
-"\t\t\t/etc/inittab\\$\\$IP=kliendi_IP\\$\\$. 脮hukeste klientide puhul "
-"muudetakse xdmcp\n"
-"\t\t\tv玫imaldamiseks s眉steemi seadetefaile xdm-config, kdmrc ja gdm.conf. "
-"Kuiv玫rd\n"
-"\t\t\txdmcp kasutamisega kaasnevad teatud turvaprobleemid, muudetakse faile\n"
-"\t\t\thosts.deny ja hosts.allow, et piirata ligip盲盲su kohalikule "
-"alamv玫rgule.\n"
-"\t\t\t\n"
-"\t\t\tM盲rkus: server tuleb peatada/k盲ivitada p盲rast kliendi lisamist v玫i "
-"muutmist.\n"
-"\t\t\t\n"
-" - /etc/exports haldamine:\n"
-" \t\tClusterNFS v玫imaldab eksportida juurfailis眉steemi kettata "
-"t枚枚jaamadele.\n"
-" \t\tdrakTermServ loob korrektse kirje, mis v玫imaldab kettata "
-"t枚枚jaamadele\n"
-" \t\tanon眉眉mset ligip盲盲su juurfailis眉steemile.\n"
-"\n"
-" \t\tT眉眉piline ekspordikirje ClusterNFS tarbeks n盲eb v盲lja selline:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tkus SUBNET/MASK m盲盲rab Teie v玫rku.\n"
-" \t\t\n"
-" - /etc/shadow\\$\\$CLIENT\\$\\$ haldamine:\n"
-" \t\tEt kasutajad saaksid kettata t枚枚jaamalt s眉steemi logida, peab "
-"nende kirje\n"
-" \t\tfailis /etc/shadow leiduma ka failis /etc/shadow\\$\\$CLIENTS\\$"
-"\\$.\n"
-" \t\tdrakTermServ aitab s眉steemi kasutajaid faili lisada v玫i sealt "
-"eemaldada.\n"
-"\n"
-" - Kliendi failid /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tClusterNFS abil v玫ivad igal kettata t枚枚jaamal olla oma "
-"unikaalsed seadetefailid\n"
-" \t\tserveri juurfailis眉steemis. Tulevikus aitab drakTermServ neid "
-"luua.\n"
-"\n"
-" - Kliendi s眉steemi seadetefailid:\n"
-" \t\tClusterNFS abil v玫ivad igal kettata t枚枚jaamal olla oma "
-"unikaalsed seadetefailid\n"
-" \t\tserveri juurfailis眉steemis. Tulevikus aitab drakTermServ luua "
-"iga kliendi kohta\n"
-" \t\tselliseid faile, nagu /etc/modules.conf, /etc/sysconfig/mouse, /"
-"etc/sysconfig/keyboard.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ seadistab selle faili, et see saaks t枚枚tada koos "
-"laadepildega, mille\n"
-" \t\ttekitab mkinitrd-net, samuti kirjed failis /etc/dhcpd.conf, et "
-"pakkuda igale kettata\n"
-" \t\tt枚枚jaamale alglaadimiseks laadepilti.\n"
-"\n"
-" \t\tT眉眉piline tftp seadetefail n盲eb v盲lja selline:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t{\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tSiin tehtud muudatused v玫rreldes vaikepaigaldusega muudavad "
-"t眉histamislipu\n"
-" \t\tv盲盲rtuseks 'no' ning kataloogirajaks muudetakse /var/lib/"
-"tftpboot, kuhu mkinitrd\n"
-" \t\tsalvestab oma laadepildid.\n"
+"valikute kirjeldus:\n"
"\n"
-" - Etherbooti flopide/CD-de loomine:\n"
-" \t\tKettata t枚枚jaamad vajavad kas ROM-laadepilti v玫rguliidesel v玫i "
-"alglaadimisflopit\n"
-" \t\tv玫i -CD-d alglaadimise k盲ivitamiseks. drakTermServ aitab neid "
-"laadepilte luua,\n"
-" \t\ttuginedes kliendi masina v玫rguliidesele.\n"
-" \t\t\n"
-" \t\tLihtne n盲ide alglaadimisflopi loomisest k盲sitsi 3com 3c509 "
-"jaoks:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
-"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Olge palun ettevaatlik, kui kasutate ftp-varundamist, sest serverile\n"
+"saadetakse ainult juba loodud varukoopiad. Seet玫ttu tuleb esmalt\n"
+"luua varukoopiad k玫vakettal ja alles siis need serverile saata.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Valikud\n"
"\n"
-"\n"
-" T盲name:\n"
-"\t- LTSP projekti http://www.ltsp.org\n"
-"\t- Michael rowni <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Siin saab valida, kas soovite kasutada graafilist t枚枚keskkonda\n"
+"kohe alglaadimisel. Pange t盲hele, et seda p盲ritakse ka siis, kui Te ei "
+"proovinudki\n"
+"seadistusi testida. On 眉sna ilmne, et vastus k玫lab \"%s\", kui masina "
+"眉lesanne\n"
+"on tegutseda serverina v玫i kui Teid ei kippunud seadistamise ajal edu saatma."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C) 2002: MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "N眉眉d on aeg seadistada %s 眉hendus."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Lisa/kustuta klient"
+msgid "MandrakeExpert Corporate"
+msgstr "Mandrake 盲riekspert"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Lisa/kustuta kasutaja"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [k玫ik]\n"
+" XFDrake [--noauto] monitor\n"
+" XFDrake kuvatihedus"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Printeri automaattuvastus"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "ei suutnud fonte leida.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "V玫rgu alglaadefailid"
+msgid "Language"
+msgstr "Valige sobiv keel"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot flopi/ISO"
+msgid "Printer model selection"
+msgstr "Printeri mudeli valik"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Serveri peatamine"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "Partitsiooni %s t眉眉bi muutmisel h盲vivad k玫ik seal olnud andmed"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Serveri k盲ivitamine"
+msgid "%d seconds"
+msgstr "%d sekundit"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Serveri keelamine"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Pange palun t眉hi flopi seadmesse %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Serveri lubamine"
+msgid "A valid URI must be entered!"
+msgstr "Sisestama peab sobiva URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Mandrake terminaliserveri s盲tted"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Leiti \"%s\" liides, kas soovite seda kasutada?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Eemalda viimane element"
+msgid "Re-configure interface and DHCP server"
+msgstr "Liidese ja DHCP serveri 眉mberseadistamine"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Lisa element"
+msgid "Sound configuration"
+msgstr "Heliseadistused"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Automaatpaigaldus"
+msgid "Photo test page"
+msgstr "Fototestlehek眉lg"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Flopi on edukalt loodud.\n"
-"N眉眉d v玫ite vajadusel paigaldust korrata."
+msgid "Custom disk partitioning"
+msgstr "Partitsioneerin ise"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "脮nnitleme!"
+msgid "Enter Printer Name and Comments"
+msgstr "Sisestage printeri nimi ja kommentaar"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Teie s眉steemiga on 眉hendatud\n"
"\n"
-"Tere tulemast!\n"
-"\n"
-"Automaatpaigalduse parameetrid on n盲ha vasakul"
+"%s%s\n"
+"printerid"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Automaatpaigaldusflopi loomine"
+msgid "type: %s"
+msgstr "t眉眉p: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "k盲sitsi"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaki (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Valige palun iga sammu puhul, kas selle peaks l盲bi viima automaatselt, nagu "
-"see sooritati paigalduse ajal, v玫i soovite seal ise kaasa r盲盲kida"
+msgid "No Sound Card detected!"
+msgstr "Helikaarti ei leitud!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automaatsete sammude seadistamine"
+msgid "Mouse Port"
+msgstr "Hiire port"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "korda"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Muutuste t盲ielikuks j玫ustamiseks tuleb kuvahaldur taask盲ivitada.\n"
+"(k盲surealt: service dm restart)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Ftp server"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"P眉眉ate hakata seadistama automaatpaigalduse flopit. See on natuke ohtlik "
-"tegevus, mida tuleb teha v盲ga ettevaatlikult.\n"
-"\n"
-"Seda v玫imalust kasutades saate korrata arvutile tehtud paigaldust ning m玫ne "
-"sammu puhul ka ise kaasa r盲盲kida, et 眉ksikuid v盲盲rtusi muuta.\n"
-"\n"
-"T盲ieliku turvalisuse huvides ei tuleks partitsioneerimist ja vormindamist "
-"kunagi lubada automaatselt sooritada, seda hoolimata sellest, millise "
-"v玫imaluse kasuks olete paigalduse algul otsustanud.\n"
+"Argumendid: (arg)\n"
"\n"
-"Kas soovite n眉眉d j盲tkata?"
+"Msec igatunnise turvakontrolli lubamine/keelamine."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Automaatpaigalduse seadistaja"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm fontide teisendamine"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ei suuda leida laadefaili '%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Siinit眉眉p, millega hiir on 眉hendatud"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Viga!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Argumendid: (size)\n"
"\n"
-"Varukoopia taastamise probleemid:\n"
-"\n"
-"Taastamise ajal kontrollib Drakbackup enne taastamist\n"
-"k玫iki Teie varukoopiafaile.\n"
-"Enne taastamist eemaldab Drakbackup Teie originaalkataloogi\n"
-"ja Te kaotate k玫ik oma andmed. Seep盲rast on oluline olla\n"
-"hoolikas ja mitte muuta varundatud andmefaile k盲sitsi.\n"
+"M盲盲rab shellik盲skude ajaloo suuruse. -1 t盲hendab piiramatu."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"valikute kirjeldus:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Olge palun ettevaatlik, kui kasutate ftp-varundamist, sest serverile\n"
-"saadetakse ainult juba loodud varukoopiad. Seet玫ttu tuleb esmalt\n"
-"luua varukoopiad k玫vakettal ja alles siis need serverile saata.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Kirjeldus:\n"
+"Siin n盲idatakse mitmeid Teie masinat puudutavaid parameetreid. S玫ltuvalt\n"
+"riistvarast v玫ite siin n盲ha k玫iki v玫i osa j盲rgmistest kirjetest. Iga kirje\n"
+"juures on 盲ra toodud elemendid, mida on v玫imalik seadistada, ning Teie "
+"masinal\n"
+"praegu kehtiv seadistus. Selle muutmiseks vajutage nupule \"%s\".\n"
"\n"
-" DrakBackup aitab Teie s眉steemist varukoopiaid teha.\n"
-" Seadistamise ajal saate valida \n"
-"\t- s眉steemsed failid, \n"
-"\t- kasutaja failid, \n"
-"\t- muud failid \n"
-"\tv玫i kogu s眉steemi ... ja muud (nt Windowsi partitsioonid)\n"
+" * \"%s\": v玫imalus kontrollida klaviatuuritabeli seadistusi\n"
+"ja neid vajaduse korral muuta.\n"
"\n"
-" DrakBackup v玫imaldab varundada j盲rgmistele andmekandjatele:\n"
-"\t- k玫vaketas.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (automaatse alglaadimise, p盲盲ste- \n"
-"\t- ja automaatse paigalduse v玫imalustega).\n"
-"\t- FTP.\n"
-"\t- rsync.\n"
-"\t- Webdav.\n"
-"\t- lint.\n"
+" * \"%s\": v玫imalus kontrollida oma riigi valikut. Kui Te ei asu\n"
+"vaikimisi m盲盲ratud maal, vajutage nuppu \"%s\" ja valige uus\n"
+"riik. Kui Teie riiki ei ole ilmuvas nimekirjas, vajutage nupule\n"
+"\"%s\", mis avab riikide t盲isnimekirja.\n"
"\n"
-" DrakBackup v玫imaldab taastada s眉steemi\n"
-" kasutaja m盲盲ratud kataloogi.\n"
+" * \"%s\": DrakX arvab vaikimisi ajav枚枚ndi 盲ra valitud keele p玫hjal. Kuid\n"
+"nagu klaviatuuri puhul, v玫ib ka siin ette tulla, et Te ei viibi n盲iteks "
+"maal,\n"
+"millele valitud keel vastab. Sellisel juhul tuleks kl玫psata nupul \"%s\",\n"
+"et seada kell selle ajav枚枚ndi ajale, kus Te parajasti viibite.\n"
"\n"
-" Vaikimisi salvestatakse k玫ik varukoopiad\n"
-" kataloogi /var/lib/drakbackup.\n"
+" * \"%s\": v玫imalus kontrollida hiire seadistusi ja neid vajadusel muuta.\n"
"\n"
-" Seadistustefail:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": kl玫ps nupul \"%s\" avab printeri seadistamise n玫ustaja.\n"
+"Seda, kuidas uut printerit seadistada, vaadake l盲hemalt k盲ivitusjuhiste "
+"vastavast\n"
+"peat眉kist. Siin n盲htav on sarnane paigaldusajal n盲htuga.\n"
"\n"
-"Taastamise k盲ik:\n"
-" \n"
-" Taastamise ajal eemaldab DrakBackup Teie\n"
-" originaalkataloogi ja kontrollib, et 眉kski varukoopia\n"
-" ei oleks vigane. Soovitatav on enne taastamist\n"
-" ette v玫tta veel 眉ks varundamine.\n"
+" * \"%s\": kui s眉steemis leiti helikaart, n盲idatakse seda.\n"
+"Kui m盲rkate, et siintoodud helikaart pole see, mis tegelikult on\n"
+"s眉steemi paigaldatud, vajutage nuppu ja valige sobiv juhtprogramm.\n"
"\n"
+" * \"%s\": vaikimisi m盲盲rab DrakX Teie graafilise liidese\n"
+"kuvatiheduseks \"800x600\" v玫i \"1024x768\". Kui see Teile ei sobi,\n"
+"vajutage nupule \"%s\" ja valige m玫ni muu v玫imalus.\n"
"\n"
+" * \"%s\": kui s眉steemis leiti TV-kaart, n盲idatakse seda.\n"
+"Kui Teil on TV-kaart, aga seda ei leitud, vajutage nupule \"%s\"\n"
+"ning p眉眉dke see k盲sitsi m盲盲rata.\n"
+"\n"
+" * \"%s\": kui s眉steemis leiti ISDN-kaart, n盲idatakse seda.\n"
+"Nupule \"%s\" vajutades saab muuta sellega seonduvaid parameetreid.\n"
+"\n"
+" * \"%s\": Kui soovite kohe seadistada juurdep盲盲su Internetti v玫i "
+"kohtv玫rku,\n"
+"saate seda teha siin nupule vajutades.\n"
+"\n"
+" * \"%s\": see pakub v玫imaluse m盲盲rata 眉mber eelmisel sammul ()\n"
+"paika pandud turvatase.\n"
+"\n"
+" * \"%s\": kui kavatsete oma masina Internetti 眉hendada, kuluks\n"
+"盲ra enda kaitsmine r眉nnakute eest tulem眉眉ri paikapanemisega. Vaadake\n"
+"眉ksikasju, kuidas tulem眉眉ri seadistada, k盲ivitusjuhiste vastavast\n"
+"peat眉kist.\n"
+"\n"
+" * \"%s\": kui soovite muuta alglaaduri seadistusi, vajutage\n"
+"sellele nupule. See on m玫eldud siiski vaid kogenud kasutajatele.\n"
+"\n"
+" * \"%s\": saate t盲pselt kontrollida, millised teenused Teie\n"
+"masinal t枚枚tavad. Kui kavatsete kasutada oma masinat serverina, kuluks\n"
+"盲ra seadistused 眉le vaadata."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoorid"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" uuendused 2002 MandrakeSoft: Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"N眉眉d on aeg seadistada %s 眉hendus.\n"
+"\n"
+"\n"
+"Vajutage j盲tkamiseks Olgu."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot resiim"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (kaabel)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Autori玫igus (C) 2001-2002 MandrakeSoft: DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"LiLo taask盲ivitamine eba玫nnestus!\n"
+"K盲ivitage \"lilo\" administraatorina k盲surealt LiLo teema paigaldamise "
+"l玫petamiseks."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Tavaline 3 nupuga hiir"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Valige muu andmekandja, millelt taastada"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Tarkvarahaldur"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14426,17 +13764,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"taastamise kirjeldus:\n"
@@ -14462,5037 +13802,5712 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"valikute kirjeldus:\n"
-"\n"
-" - S眉steemsete failide varundamine:\n"
-" \n"
-"\tSee v玫imalus laseb varundada kataloogi /etc,\n"
-"\tmis sisaldab k玫iki Teie seadistustefaile. Olge\n"
-"\tpalun taastamise ajal ettevaatlik ja 盲rge kirjutage\n"
-"\t眉le j盲rgmisi faile:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab \n"
-"\n"
-" - Kasutaja failide varundamine: \n"
-"\n"
-"\tSee v玫imalus laseb valida k玫ik kasutajad, keda\n"
-"\tsoovite varundada.\n"
-"\tKettaruumi kokkuhoiu huvides on soovitatav mitte\n"
-"\tkaasata veebilehitseja puhvrit.\n"
-"\n"
-" - Muude failide varundamine: \n"
-"\n"
-"\tSee v玫imalus lubab salvestada veelgi enam\n"
-"\tandmeid, kuid praegu ei ole selle puhul veel\n"
-"\tv玫imalik kasutada muutvarundamist.\t\t\n"
-" \n"
-" - Muutvarundamine:\n"
-"\n"
-"\ttMuutvarundamine on k玫ige v玫imsam kasutatav\n"
-"\tvalik, mis lubab esmalt varundada k玫ik andmed\n"
-"\tja seej盲rel ainult vahepeal muutunud andmed.\n"
-"\tSel moel on v玫imalik ka taastamise ajal taastada\n"
-"\tkonkreetse daatumiga andmed.\n"
-"\tKui Te ei ole seda v玫imalust valinud, kustutatakse\n"
-"\tenne iga varundamist vanad varukoopiad. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" M玫ned vead meili saatmisel sendmail-iga on\n"
-" p玫hjustatud postfixi seadistuste vigadest. Nende\n"
-" k玫rvaldamiseks m盲盲rake 'myhostname' v玫i\n"
-" 'mydomain' failis /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "Uuestisaatmine"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"valikute kirjeldused:\n"
-"\n"
-" Sellel sammul v玫imaldab Drakbackup muuta:\n"
-"\n"
-" - Tihendusmeetodit:\n"
-" \n"
-" Kui valite tihenduse bzip2, 玫nnestub teil andmeid\n"
-" tihendada paremini kui gzip-iga (umbes 2-10 %%).\n"
-" See ei ole vaikimisi m盲rgitud, sest see meetod\n"
-" n玫uab ka palju enam aega (umbes 1000%% enam).\n"
-" \n"
-" - Uuendamismeetodit:\n"
-"\n"
-" See v玫imalus uuendab Teie varukoopiad, kuid pole\n"
-" tegelikult eriti m玫istlik, sest enne seda, kui uuendada,\n"
-" tuleb varukoopiad lahti pakkida.\n"
-" \n"
-" - .backupignore meetodit:\n"
-"\n"
-" Nagu cvs-i puhul, eirab ka Drakbackup igas kataloogis\n"
-" k玫ike seda, mis on kirjas .backupignore failides.\n"
-" nt: \n"
-" /*> cat .backupignore*\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD on kohal - j盲tka."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Taastamine"
+msgid "Network & Internet"
+msgstr "Kohtv玫rk ja Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Varunda n眉眉d!"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Leedu \"foneetiline\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Muud s盲tted"
+msgid "Net Boot Images"
+msgstr "V玫rgu alglaadefailid"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "N玫ustaja s盲tted"
+msgid "Sharing of local scanners"
+msgstr "Sk盲nnerite jagamine"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Varundamise s盲tete vaatamine."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Plug'n Play test eba玫nnestus. Palun valige monitor t盲psemalt"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Seadistustefaili varundamine n眉眉d!"
+msgid "Services and deamons"
+msgstr "Teenused ja deemonid"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackupi s盲tted"
+msgid "Remote host name missing!"
+msgstr "Kaugarvuti nimi puudub!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Edenemine kokku"
+msgid "with /usr"
+msgstr "koos /usr-ga"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Failide saatmine..."
+msgid "Network"
+msgstr "V玫rk"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "failide saatmine FTP kaudu"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Microsoft Windowsi masinatega 眉hendatud printerite automaattuvastus"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Muude failide varundamine"
+msgid "This password is too simple"
+msgstr "Salas玫na on liiga lihtne"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Kasutaja failide varundamine"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaki (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "S眉steemsete failide varundamine"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Programmeerimine erinevates keeltes, n盲iteks Perl, Python, C ja C++, pole "
+"kunagi varem olnud nii h玫lpus - seda t盲nu GNU gcc 3-le ja parimatele vaba "
+"tarkvara arenduskeskkondadele."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Tegutsen ... palun oodake."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "T玫eliselt minimaalne (eriti just ilma urpmi-ta)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Seadistustefaili ei leitud, \n"
-"kl玫psake palun nupul 'N玫ustaja' v玫i 'Muud'."
+" Kanna 眉le \n"
+"N眉眉d"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Valige palun varundamiseks andmed..."
+msgid "Use daemon"
+msgstr "Deemoni kasutamine"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Valige palun varundamiseks andmekandja..."
+msgid "Authentication"
+msgstr "Autentimisviis"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Valige palun taastatavad andmed..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Lisa printer StarOffice/OpenOffice.org/GIMP-ile"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Paigaldada tuleb j盲rgmised paketid:\n"
+msgid "Additional CUPS servers: "
+msgstr "T盲iendavad CUPS serverid: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Viga faili saatmisel FTP kaudu.\n"
-" Palun korrigeerige FTP seadistusi."
+"Valige loendist 眉ks automaatselt tuvastatud printeritest v玫i kirjutage "
+"sisendiv盲ljale masinanimi v玫i IP ja kui teate, ka pordi number (vaikimisi on "
+"see 9100)."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Kuhu soovite haakida %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Taasta v玫rgust"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Al啪eeria"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd suurus"
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Viga meili saatmisel.\n"
-" Raportimeili ei 玫nnestunud saata.\n"
-" Seadistage palun sendmail"
+"Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n"
+"kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n"
+"k玫ige enam vastab."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "J盲rgmine"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tvarukoopiad tar- ja gzip-vormingus\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Eelmine"
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Salvesta"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[V脮TI]...\n"
+" --no-confirmation ei k眉sita esimest kinnitust MandrakeUpdate "
+"resiimis\n"
+" -no-verify-rpm pakettide signatuure ei kontrollita\n"
+" --changelog-first n盲itab kirjelduse aknas enne faililoendit "
+"muudatuste logi\n"
+" -merge-all-rpmnew proovib liita k玫ik leitud failid .rpmnew/.rpmsave"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Varukoopia loomine"
+msgid "Setting Default Printer..."
+msgstr "Vaikeprinteri seadmine..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Taastamise edenemine"
+msgid "Interface %s (using module %s)"
+msgstr "Liides %s (kasutab moodulit %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Taastamine kataloogist"
+msgid "Name: %s\n"
+msgstr "Nimi: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Lehitse uut taastamishoidlat."
+msgid "Generating preview ..."
+msgstr "Eelvaatluse tekitamine ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD on kohal - j盲tka."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Sagedus peab sisaldama sufiksit k, M v玫i G (n盲iteks \"2.46G\" - 2,46 GHz "
+"sagedusel), v玫i lisage piisavalt nulle."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Taastamise kohandamine"
+msgid "serial"
+msgstr "jadapordi"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Taasta k玫ik varukoopiad"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Taastamine eba玫nnestus..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Gruusia (\"ladina\" asetus)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Taastatud failid..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
+"Hankige parimad kaubad ja teenused Mandrake Linuxi strateegilistelt "
+"partneritelt"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Kataloogi v玫i mooduli n玫udmine"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"N眉眉d v玫ite m盲盲rata oma parameetrid moodulile %s.\n"
+"Pange t盲hele, et iga aadress tuleb sisestada prefiksiga 0x, nt '0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Masinanime n玫udmine"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 pakub Teile Mandrake juhtimiskeskust - v玫imsat vahendit "
+"oma arvuti kohandamiseks, et sellest viimane v盲lja v玫tta. Seadistada ja "
+"meelep盲raseks muuta saab turvataset, v盲lisseadmeid (monitor, hiir, "
+"klaviatuur...), Interneti眉hendust ja veel palju-palju muud!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Kasutajatunnuse n玫udmine"
+msgid "Kenya"
+msgstr "Keenia"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Parooli n玫udmine"
+msgid "Use ``Unmount'' first"
+msgstr "Kasutage enne \"Lahuta\""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Masina kataloog v玫i moodul"
+msgid "Installing mtools packages..."
+msgstr "Paketi \"mtools\" paigaldamine..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Masinanimi"
+msgid "You must specify a root partition"
+msgstr "Teil peab olema juurpartitsioon"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Taasta v玫rguprotokolli abil: %s"
+msgid "first step creation"
+msgstr "esimene samm loomine"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Taasta v玫rgust"
+msgid "Both Shift keys simultaneously"
+msgstr "M玫lemad Shift-klahvid korraga"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Lindi nimi pole korrektne. Lint kannab nime %s."
+msgid "Select a scanner model"
+msgstr "Valige sk盲nneri mudel"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Sisestage lint nimega %s\n"
-" lindiseadmesse %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR, uus p玫lvkond"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Taasta lindilt"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackupi s盲tted"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "CD nimi pole korrektne. Ketta nimi on %s."
+msgid "Save as.."
+msgstr "Salvesta kui..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Sisestage CD nimega %s\n"
-" CD-seadmesse haakepunktis /mnt/cdrom"
+"Seda liidest ei ole veel seadistatud.\n"
+"K盲ivitage peaaknas seadistamise n玫ustaja"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Taasta CD-lt"
+msgid "Korea (North)"
+msgstr "P玫hja-Korea"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "%s ei sisaldanud varukoopiafaile."
+msgid "Autologin"
+msgstr "Vaikimisi sisenemine"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Muuda\n"
-"taastamise asukohta"
+msgid "System configuration"
+msgstr "S眉steemi s盲tted"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Domeeni administraatori parool"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Taasta valitud\n"
-"failid"
+"Arvuti saab kohandada just oma vajadustele t盲nu Mandrake Linuxi kasutajatele "
+"pakutavatele 11 igati seadistatavale kasutajaliidesele: KDE 3.1, GNOME 2.2, "
+"WindowMaker..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Printeri seadistamine..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Taasta valitud\n"
-"kataloogikirje"
+"Andmepidevuse tagamiseks p盲rast partitsiooni(de) suuruse muutmist \n"
+"kontrollitakse j盲rgmisel Windows(TM) alglaadimisel failis眉steemi"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Kasutaja kataloogide eemaldamine enne taastamist."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Uus varundamine enne taastamist (ainult muutvarunduse puhul)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "kui on 'jah', kontrollib veidi rpm andmebaasist."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "valige asukoht, kuhu taastada (kui ei ole /)"
+msgid "Virgin Islands (British)"
+msgstr "Neitsisaared (Briti)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Muu taastamine"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Kasutajate taastamine"
+msgid "click here if you are sure."
+msgstr "kui olete kindel, kl玫psake siia."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "S眉steemi taastamine"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Seadistustefaili ei leitud, \n"
+"kl玫psake palun nupul 'N玫ustaja' v玫i 'Muud'."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Muu andmekandja"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"脺lal on toodud k玫ik Teie k玫vakettal olemasolevad Linuxi partitsioonid\n"
+"Vaikimisi on need enamasti 眉sna m玫istlikud. Kui teete nendes muutusi,\n"
+"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga v盲ikeste\n"
+"partitsioonide puhul v玫ib tekkida raskusi piisava hulga tarkvara "
+"paigaldamisel.\n"
+"Kasutajate jaoks on sageli m玫istlik luua eraldi \"/home\" partitsioon.\n"
+"(Seda m玫istagi juhul, kui tegemist on enam kui 眉he Linuxi partitsiooniga).\n"
+"\n"
+"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
+"\n"
+"\"Nimi\" koosneb k玫vakettat眉眉bist, selle numbrist ja partitsiooni\n"
+"numbrist (n盲iteks \"hda1\").\n"
+"\n"
+"K玫vaketta t眉眉p on \"hd\", kui on tegemist IDE kettaga, ning \"sd\", kui on\n"
+"tegemist SCSI kettaga.\n"
+"\n"
+"K玫vaketta number on alati t盲ht \"hd\" v玫i \"sd\" j盲rel. IDE ketastel:\n"
+"\n"
+" * \"a\" - esmase IDE kontrolleri 眉lem,\n"
+"\n"
+" * \"b\" - esmase IDE kontrolleri allutatu,\n"
+"\n"
+" * \"c\" - teisese IDE kontrolleri 眉lem,\n"
+"\n"
+" * \"d\" - teisese IDE kontrolleri allutatu.\n"
+"\n"
+"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Valige muu andmekandja, millelt taastada"
+msgid "Remove"
+msgstr "Eemalda"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Sisestage palun kataloog, kuhu varukoopiad on salvestatud"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Taastamine k玫vakettalt."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Kvootide kasutamine varukoopiafailidel."
+msgid "Pipe job into a command"
+msgstr "T枚枚 toru kaudu k盲suks"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Sisestage palun Drakbackupi\n"
-" suurim lubatud suurus"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "uus d眉naamiline seadmenimi, mille genereerib kerneli devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Sisestage palun kataloog, kuhu salvestada:"
+msgid "Yes"
+msgstr "Jah"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Varundamine k玫vakettale"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "valige palun kuup盲ev/aeg, kust taastada"
+msgid "Which protocol do you want to use?"
+msgstr "Millist protokolli soovite kasutada?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Varunda s眉steemsed failid, mis on loodud enne:"
+msgid "Restore Progress"
+msgstr "Taastamise edenemine"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Taastatav kasutajate loend (olulised on ainult k玫ige uuemad andmed)"
+msgid "Estonia"
+msgstr "Eesti"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Muude failide taastamiseks vajuta 'Olgu'."
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr ""
+"Valige palun masin, mille jaoks soovite siinseid sk盲nnereid v盲lja jagada:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Taastamise seadistamine "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Partitsioonitabelis on miskip盲rast t眉hi koht, aga see ei ole kasutatav.\n"
+"Ainuke lahendus on nihutada primaarset partitsiooni, et \"auk\" satuks "
+"laiendatud partitsioonide k玫rvale."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " edukalt taastatud %s -l "
+msgid "Channel"
+msgstr "Kanal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " K玫ik valitud andmed on "
+msgid "Add"
+msgstr "Lisa"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Varukoopia failid on vigased"
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Interneti眉henduse jagamist ei ole kunagi seadistatud."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Palun t眉histage valik v玫i eemaldage j盲rgmisel korral."
+msgid " Error while sending mail. \n"
+msgstr " Viga meili saatmisel. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Klaviatuur"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Vigaste andmete loend:\n"
-"\n"
+"Sisestage CD nimega %s\n"
+" CD-seadmesse haakepunktis /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Taastatavate andmete loend:\n"
-"\n"
+"Kiirus peab sisaldama sufiksit k, M v玫i G (n盲iteks \"11M\"), v玫i lisage "
+"piisavalt nulle."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Seadistus puudub, kl玫psake palun nupul N玫ustaja v玫i Muud.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Valige 眉hendus, mida seadistada"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-v玫rk webdavi vahendusel.\n"
+msgid "Please wait, setting security level..."
+msgstr "Palun oodake, s盲tin turvataseme..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-v玫rk rsync vahendusel.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 kujutab endast t盲iuslikku arendusplatvormi"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-v玫rk SSH vahendusel.\n"
+msgid "Configuring network device %s"
+msgstr "Seadistame v玫rgukaardi %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-v玫rk FTP vahendusel.\n"
+msgid "activated"
+msgstr "aktiveeritud"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-lint \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Palun valige, millist v玫rguliidest soovite dhcp serveri jaoks kasutada"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Otsin uuendatavaid pakette..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-k玫vaketas.\n"
+msgid "Mount point: "
+msgstr "Haakepunkt:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- deemon (%s) sisaldab:\n"
+msgid "parse all fonts"
+msgstr "k玫igi fontide anal眉眉s"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tvarukoopiad tar- ja gzip-vormingus\n"
+msgid "With X"
+msgstr "X-iga"
-#: ../../standalone/drakbackup:1
+#
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tvarukoopiad tar- ja bzip2-vormingus\n"
+msgid "Multi-head configuration"
+msgstr "Mitme monitori seadistamine"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\ts眉steemsete failide k玫rvalej盲tmine\n"
+msgid "No browser available! Please install one"
+msgstr "Brauserit ei leitud! Palun paigaldage m玫ni"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"Kas s盲ilitada muudatused?\n"
+"Olemasolevad s盲tted:\n"
"\n"
-"- valikud:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t kasutajatunnus: %s\n"
-"\t\t asukohas: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "ReiserFS ei ole kasutatav alla 32MB partitsioonidel"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- salvesta %s vahendusel masinale: %s\n"
+"Protokoll rwho laseb 眉le v玫rgu saada informatsiooni\n"
+"s眉steemi kasutajate kohta. Ettevaatust!"
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tPuhasta=%s"
+msgid "Domain name"
+msgstr "Domeeninimi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- salvesta lindile seadmel: %s"
+msgid "Sharing of local printers"
+msgstr "Printerite jagamine"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (mitmeseansiline)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr " seadmel: %s"
+msgid "Available printers"
+msgstr "Saadaolevad printerid"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "T眉hi"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- kirjuta CD-le"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- kustuta p盲rast varundamist k玫vakettalt tar-failid.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- salvesta k玫vakettale asukohta: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- muud failid:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (ehk X Window System) kujutab endast GNU/Linuxi graafilise "
+"kasutajaliidese\n"
+"tuuma ja s眉dant, millele toetuvad k玫ik Mandrake Linuxiga kaasas k盲ivad\n"
+"graafilised t枚枚keskkonnad (KDE, GNOME, AfterStep, WindowMaker jne).\n"
"\n"
-"- kasutaja failid.\n"
+"Siin n盲idatakse Teile tervet nimekirja parameetreid, mida saab muuta,\n"
+"et graafiline kasutajaliides oleks just Teile meelep盲rane: Videokaart\n"
+"\n"
+" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt masinale\n"
+"paigaldatud videokaardi. Kui see ei 玫nnestu, saate nimekirjast valida\n"
+"kaardi, mis tegelikult on masinale paigaldatud.\n"
+"\n"
+" Juhul, kui Teie kaardile peaks saada olema erinevaid servereid nii 3D\n"
+"kiirendusega kui ilma, saate valida serveri, mis Teie vajadustele\n"
+"k玫ige enam vastab.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt Teie masinaga\n"
+"眉hendatud monitori. Kui see ei peaks siiski 玫nnestuma, saate siin toodud\n"
+"nimekirjast valida monitori, mis Teil tegelikult on.\n"
+"\n"
+"\n"
+"\n"
+"Kuvatihedus\n"
+"\n"
+" Siin saate valida Teie riistvaraga sobiva kuvatiheduse ja v盲rvis眉gavuse.\n"
+"Kui Te paigalduse j盲rel leiate, et siin valitu siiski ei k玫lba, saate seda\n"
+"hiljem muuta. Valitud seadistust n盲idatakse monitoril.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" s眉steem p眉眉ab avada graafilist akent soovitud kuvatihedusega. Kui n盲ete\n"
+"testi ajal s玫numit ja vastate \"%s\", suundub DrakX j盲rgmise sammu juurde.\n"
+"Kui Te s玫numit ei n盲e, t盲hendab see, et miski automaatselt tuvastatud\n"
+"seadistuses oli m盲da ja test l玫peb automaatselt 12 sekundi p盲rast, tuues\n"
+"Teid men眉眉sse tagasi. Seal saate muuta seadistusi, kuni Teil 玫nnestub\n"
+"leida see, mis tagab korrektse ja meelep盲rase graaafilise kasutajaliidese.\n"
+"\n"
+"\n"
+"\n"
+"Valikud\n"
+"\n"
+" Siin saab m盲盲rata, kas soovite, et masin k盲ivitaks alglaadimise ajal\n"
+"automaatselt graafilise kasutajaliidese. Ilmselt on Teie vastus \"%s\",\n"
+"kui soovite, et masin toimiks serverina, v玫i kui Teid ei kippunud\n"
+"seadistamise ajal edu saatma."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "teksti laius"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Kuhu soovite haakida seadme %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Rendiaeg vaikimisi (sekundites)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Liides \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Baasdokumentatsiooniga (soovitatav!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 nupuga"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- s眉steemsed failid:\n"
+"%d tundmatut printerit on Teie s眉steemi otse 眉hendatud"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Argumendid: (arg)\n"
"\n"
-"Varundusallikad: \n"
+"Lubab/keelab administraatori vahetu sisselogimise."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Kasutaja valik k盲sitsi"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "kasutajate faile"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Teie valik? (vaikimisi '%s'%s)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "s眉steemseid faile"
+msgid "Raw printer"
+msgstr "Toorprinter"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Valige palun, mida soovite varundada"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "CPU ametlik tootja"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "lindiseadmele"
+msgid "Vendor"
+msgstr "Tootja"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "CDROM-ile"
+msgid "Interface %s"
+msgstr "Liides %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "眉le v玫rgu"
+msgid "Configure mouse"
+msgstr "Hiire seadmine"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "k玫vakettale"
+msgid "Choose the mount points"
+msgstr "Valige haakepunktid"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Valige palun, kuhu soovite varukoopia salvestada"
+msgid "OK"
+msgstr "Olgu"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Rohkem valikuid"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslaavia (ladina)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Millal"
+msgid "Installing"
+msgstr "Paigaldan"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Kus"
+msgid "Launch userdrake"
+msgstr "Userdrake k盲ivitamine"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Mis"
+msgid "Is this an install or an upgrade?"
+msgstr "Kas see on paigaldus v玫i uuendamine?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Kustuta tar-failid k玫vakettalt p盲rast varundamist muule andmekandjale."
+msgid "ISDN card"
+msgstr "ISDN kaart"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Saada p盲rast iga varundamist meiliraport aadressile:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Oma teadmiste jagamiseks ning Linuxi vahendite loomiseks v玫ite 眉hineda "
+"diskussioonir眉hmadega, mida leiab meie \"kogukonna\" veebilehek眉lgedel"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Kontrollige palun, et cron-deemon oleks teenustega kaasatud.\n"
+"脮nnitleme, v玫rk ja interneti眉hendus on seadistatud.\n"
+"S盲tted salvestatakse n眉眉d.\n"
"\n"
-"Pange t盲hele, et praegu kasutavad k玫vaketast ka k玫ik 'v玫rgu'-andmekandjad."
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Valige palun varundamiseks\n"
-"kasutatav andmekandja."
+msgid "\t-Hard drive.\n"
+msgstr "\t-k玫vaketas.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Valige palun varundamiste\n"
-"vaheline ajaline intervall"
+"Seda sammu on vaja ainult siis, kui masinas leiti vana\n"
+"GNU/Linuxi partitsioon.\n"
+"\n"
+"DrakX soovib n眉眉d teada, kas tahate paigaldada uue s眉steemi v玫i uuendada\n"
+"olemasolevat Mandrake Linuxi s眉steemi:\n"
+"\n"
+" * \"%s\": 眉ldiselt p眉hib see vana s眉steemi t盲ielikult minema. Kui\n"
+"soovite muuta praeguseid partitsioone v玫i failis眉steemi, siis v玫iks seda "
+"v玫imalust\n"
+"kasutada. S玫ltuvalt kettajagamise viisist on v玫imalik ka m玫ningaid andmeid\n"
+"眉lekirjutamise eest p盲盲sta.\n"
+"\n"
+" * \"%s\": see paigaldusviis v玫imaldab uuendada praegu olemasolevasse\n"
+"Mandrake Linuxi s眉steemi paigaldatud pakette. Kettajagamisskeemi ega "
+"kasutajate\n"
+"andmeid ei muudeta. Enamik seadistussamme on kasutatavad sarnaselt "
+"tavap盲rasele\n"
+"paigaldusele.\n"
+"\n"
+"V玫imalus \"Uuendus\" peaks toimima edukalt Mandrake Linuxi s眉steemides\n"
+"alates versioonist 8.1. Uuenduse proovimist varasemate versioonide peal\n"
+"me siiski ei soovita."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "Deemoni kasutamine"
+msgid "Printer on remote CUPS server"
+msgstr "CUPS printserver"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
-msgstr "iga kuu"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Printeri \"%s\" eemaldamine StarOffice/OpenOffice.org/GIMP-ilt eba玫nnestus."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr "iga n盲dal"
+msgid "delete"
+msgstr "kustuta"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
-msgstr "iga p盲ev"
+msgid "here if no."
+msgstr "kui mitte, siis siia."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "hourly"
-msgstr "iga tund"
+msgid "DHCP host name"
+msgstr "DHCP masinanimi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "K玫vaketas / NFS"
+msgid "The maximum lease (in seconds)"
+msgstr "Maksimaalne rendiaeg (sekundites)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Millisesse jadaporti on Teie hiir 眉hendatud?"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Sisestage palun kataloog, kuhu salvestada:"
+msgid "Did it work properly?"
+msgstr "Kas k玫ik oli korras?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "M盲rkige palun, kui soovite p盲rast varundamist lindi v盲ljastamist."
+msgid "Poor"
+msgstr "V盲hene"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "M盲rkige palun, kui soovite lindi enne varundamist puhastada."
+msgid "The DHCP start range"
+msgstr "DHCP vahemiku algus"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "M盲rkige palun, kui soovite kasutada tagasikerimisv玫imaluseta seadet."
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Sisestage palun varundamiseks kasutatava seadme nimi"
+msgid "Unsafe"
+msgstr "Ebaturvaline"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Varundamine lindile"
+msgid ", %s sectors"
+msgstr ", %s sektorit"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No CD device defined!"
-msgstr "CD-seade on m盲盲ramata!"
+msgid "No"
+msgstr "Ei"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Sisestage palun oma CD-kirjutaja seadmenimi\n"
-" nt: 0,1,0"
+"Kas Teie printer on mitmefunktsionaalne HP v玫i Sony toode (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 sk盲nneriga, Sony IJP-V100) v玫i vahest HP "
+"PhotoSmart ehk siis HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "M盲rkige palun, kui kasutate DVDRAM seadet"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "M盲rkige palun, kui kasutate DVDR seadet"
+msgid "could not find any font.\n"
+msgstr "ei suutnud fonte leida.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid " Erase Now "
-msgstr " Puhasta n眉眉d! "
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr ""
-"M盲rkige palun, kui soovite puhastada oma RW andmekandja (esimene seanss)"
+msgid "Vertical refresh rate"
+msgstr "Ekraaniuuendussagedus"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "M盲rkige palun, kui kasutate CDRW andmekandjat"
+msgid "Entering step `%s'\n"
+msgstr "J盲rgmine samm: '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "M盲rkige palun mitmeseansilise CD korral"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Valige palun CD/DVD andmekandja suurus (Mb)"
+msgid "Removing %s ..."
+msgstr "%s eemaldamine..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Valige palun CD/DVD-seade.\n"
-"(Vajutage Enter s盲tete levitamiseks teistele v盲ljadele.\n"
-"See v盲li ei ole kohustuslik, ainult vahend vormi t盲itmiseks.)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Varundamine CD/DVDROM-ile"
+msgid "No printer"
+msgstr "Printer puudub"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Vaja l盲heb masinanime, kasutajatunnust ja parooli!"
+msgid "alert configuration"
+msgstr "hoiatuse s盲tted"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "J盲ta parool meelde"
+msgid "NetWare Printer Options"
+msgstr "NetWare printeri s盲tted"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please enter your password"
-msgstr "Sisestage palun parool"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s k盲ivituslogo (%s) eelvaatlus"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please enter your login"
-msgstr "Sisestage palun kasutajatunnus"
+msgid "General"
+msgstr "脺ldine"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Sisestage palun kataloog (v玫i moodul), kuhu\n"
-" sellel masinal varukoopia salvestada."
+msgid "Printing system: "
+msgstr "Tr眉kkimiss眉steem: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Sisestage palun masinanimi v玫i IP."
+msgid "Add a user"
+msgstr "Tavakasutaja"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Muud (mitte drakbackupi)\n"
-"v玫tmed on juba paigas"
+msgid "Network configuration (%d adapters)"
+msgstr "V玫rgus盲tted (%d liidest)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "Puudub kohustuslik pakett %s"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filipiinid"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Olgu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Tr眉kij盲rjekorra nimi"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Kas soovite kasutada aboot-i?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Valgevene"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Kanna 眉le \n"
-"N眉眉d"
+"PDQ toetab ainult kohalikke printereid, v玫rguprintereid (LPD) ning Socket/"
+"TCP printereid.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Liiguta failid uuele partitsioonile"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Loo/Kanna 眉le\n"
-"varundusv玫tmed SSH jaoks"
+"Lisage siia CUPS serverid, mille printereid soovite kasutada. Seda tuleb "
+"teha ainult siis, kui serverid ei saada oma printeri(te) infot 眉ldleviga "
+"kohtv玫rku."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Expecti kasutamine SSH jaoks"
+msgid "Restore From Catalog"
+msgstr "Taastamine kataloogist"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "V玫rgumeetod:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "V玫rgu眉henduse kasutamine varundamiseks"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Kasutajad"
+msgid "group :"
+msgstr "grupp :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "partitsiooni %s haakimine kataloogis %s eba玫nnestus"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Muutvarunduse kasutamine (vanu varukoopiaid ei asendata)"
+msgid "Lilo screen"
+msgstr "LiLo ekraan"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Eemalda valitud"
+msgid "LILO with graphical menu"
+msgstr "LiLo graafikaresiimis"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Veebilehitseja m盲lupuhvri k玫rvalej盲tmine"
+msgid "Estimating"
+msgstr "Oletan"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "M盲rkige palun k玫ik kasutajad, keda soovite varukoopiasse kaasata."
+msgid "You can't unselect this package. It is already installed"
+msgstr "See pakett on juba paigaldatud"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Selle valikuga v玫ite taastada kataloogi /etc suvalise versiooni."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", printer \"%s\" SMB/Windows serveril \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Kriitiliste failide k玫rvalej盲tmine (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Ikkagi edasi?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Muutvarunduse kasutamine (vanu varukoopiaid ei asendata)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Otsin saadaolevaid pakette ja loon uuesti rpm andmebaasi..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Varunda s眉steemsed failid (kataloog /etc)"
+msgid "Does not appear to be recordable media!"
+msgstr "See ei paista k眉ll olevat kirjutatav andmekandja!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Need valikud v玫ivad varundada ja taastada k玫ik failid kataloogis /etc.\n"
+msgid "Specify options"
+msgstr "M盲盲rata parameetrid"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "Vanuatu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Andma peab kas serveri nime v玫i serveri IP!"
+
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Isetehtud alglaadimisketas annab Teile v玫imaluse laadida Linux flopilt\n"
+"s玫ltumata tavalisest alglaadijast. See v玫ib abiks olla, kui Te ei soovi\n"
+"SILO-t k玫vakettale kirjutada v玫i m玫ni muu operatsioonis眉steem SILO\n"
+"盲ra kustutab v玫i ei 玫nnestu SILO-t Teie riistvara peal kasutada.\n"
+"Alglaadimisflopi on kasutatav ka h盲daabikettana, kui k玫vakettal oleva\n"
+"failis眉steemiga peaks mingi 玫nnetus juhtuma.\n"
+"Hoidke end ja Teid hoiab ka Jumal!\n"
"\n"
-"Kontrollige palun k玫iki vajalikke valikuid.\n"
+"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
+"\"Olgu\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Valige failid v玫i kataloogid ja kl玫psake 'Lisa'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Te ei saa haakepunkti %s jaoks kasutada kr眉ptitud failis眉steemi"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Failivalik"
+msgid "Norfolk Island"
+msgstr "Norfolki saar"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Kataloogi ei 玫nnestunud luua!"
+msgid "Theme installation failed!"
+msgstr "Teema paigaldamine eba玫nnestus!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Viga meili saatmisel. \n"
+msgid "Nothing to do"
+msgstr "Pole midagi teha"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackupi tegevus lindi vahendusel:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Kasuta loopback-ina"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackupi tegevus CD vahendusel:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake veateate abivahend"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackupi tegevus %s vahendusel:\n"
-"\n"
+msgid "use pppoe"
+msgstr "pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Failide liigutamine uuele partitsioonile"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Edasij玫udnud"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Kanna 眉le"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Rootsi)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" FTP 眉henduse probleem: FTP kaudu pole v玫imalik saata Teie varukoopiafaile.\n"
+msgid "More Options"
+msgstr "Rohkem valikuid"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Kustuta tar-failid k玫vakettalt p盲rast varundamist muule andmekandjale."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"FTP kaudu saadetud faililoend: %s\n"
-" "
+"Cron on UNIXi s眉steemide standardvahend kasutaja programmide perioodiliseks\n"
+"k盲ivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
+"mugavust t玫stvaid omadusi. Soovitatav s眉steemile, mis t枚枚tab 24h."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Varukoopiaga v玫rreldes pole mingeid muutusi!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "K玫vaketta varundamine..."
+msgid "Add Client -->"
+msgstr "Lisa klient -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Muude failide varundamine..."
+msgid "Read carefully!"
+msgstr "Lugege hoolega!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "K玫vaketta varundamise edenemine..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Kasutajafailide varundamine..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Palun m盲rkige 盲ra\n"
+"oma teles眉steem ja riik"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "S眉steemsete failide varundamine..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Seadmes %s puudub lint!"
+msgid "No (experts only)"
+msgstr "Ei (ainult eksperdile)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "CD-le ligip盲盲sul tekkis loaprobleem."
+msgid "No kernel selected!"
+msgstr "Kernelit pole valitud!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Andmekandja puhastamine v玫tab m玫ni hetk aega."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Enter laeb Teie valiku, 'e' laseb muuta"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Seda andmekandjat ei saa puhastada!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "See ei paista k眉ll olevat kirjutatav andmekandja!"
+msgid "The encryption keys do not match"
+msgstr "Kr眉ptov玫tmed ei klapi"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "CDR/DVDR ei ole seadmes!"
+msgid "Right \"Windows\" key"
+msgstr "Parempoolne \"Windows\"-klahv"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAVi 眉lekanne eba玫nnestus!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "WebDAVi kaugsait on juba s眉nkroonis!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "kui on 'jah', kontrollib t眉hja salas玫na /etc/shadow-s."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Edenemine kokku"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Enne j盲tkamist lugege hoolikalt l盲bi litsentsileping. See kehtib kogu "
+"Mandrake\n"
+"Linuxi distributsiooni kohta. Kui Te k玫igi selle tingimustega n玫us olete,\n"
+"m盲rkige 盲ra kast \"%s\". Kui Teile aga miski ei meeldi, siis l眉litage\n"
+"lihtsalt arvuti v盲lja."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"脺lekanne oli edukas\n"
-"V玫ite kontrollida, kas suudate serverile sisse logida k盲suga:\n"
+"See on loend praegusel printeril kasutamisk玫lblike tr眉kkimisvalikutega:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Kuvatihedused"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"ilma et Teilt k眉sitaks parooli."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"drakfirewalli seadistaja\n"
+"\n"
+"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
+"Kui vajate v玫imsat tulem眉眉ri, vaadake palun\n"
+"spetsiaalset MandrakeSecurity Firewall distributsiooni."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s ei vasta"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Palun sisestage sellele masinale ligip盲盲suks oma kasutajanimi, parool ja "
+"domeeni nimi."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "%s leidmine %s -l eba玫nnestus"
+msgid "Remove selected host"
+msgstr "Eemalda valitud masin"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "%s 眉lekandmiseks %s -le puudub luba"
+msgid "Network configuration"
+msgstr "V玫rgus盲tted"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Halb parool %s puhul"
+msgid "No sharing"
+msgstr "Jagamiseta"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Parooli ei p盲rita masinal %s pordis %s"
+msgid "Move selected rule down one level"
+msgstr "Valitud reegel 眉ks tase allapoole"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "VIGA: %s tekitamine eba玫nnestus."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "V玫tmete genereerimine v玫tab m玫ne hetke aega."
+msgid "Please check if you are using a DVDR device"
+msgstr "M盲rkige palun, kui kasutate DVDR seadet"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s on olemas, kas kustutada?\n"
-"\n"
-"Hoiatus: Kui te olete selle protsessi juba sooritanud, tuleks\n"
-" Teil ka kirje kustutada serveril autoriseeritud v玫tmete seast."
+msgid "FATAL"
+msgstr "SAATUSLIK"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP server v玫imaldab teistel arvutitel sooritada alglaadimise PXE "
+"vahendusel antud aadressivahemikus.\n"
"\n"
-" DrakBackupi raporti 眉ksikasjad\n"
-"\n"
+"V玫rguaadress on %s, v玫rgumask %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Kustuta"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Argumendid: (arg)\n"
"\n"
-" DrakBackup deemoni raport\n"
-"\n"
-"\n"
+"Lubab/keelab konsoolikasutajal taask盲ivituse."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackupi raport \n"
-"\n"
+"Teie arvutis on v玫imalik k盲ivitada X juba alglaadimisel.\n"
+"Kas soovite nii teha?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Ketta loomine"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "SAATUSLIK"
+msgid "Disconnect %s"
+msgstr "%s 眉henduse katkestamine"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "HOIATUS"
+msgid "Status:"
+msgstr "Olek:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron ei ole veel saadaval mitteadministraatorile"
+msgid "HTTP proxy"
+msgstr "HTTP vahendaja"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s paigaldamine eba玫nnestus. Tekkis j盲rgmine viga:"
+msgid "SSH Server"
+msgstr "SSH server"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ei taha automaatselt siseneda"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-v玫rk rsync vahendusel.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"
+msgid "European protocol"
+msgstr "Euroopa protokoll"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "K盲ivita X Windows alglaadimisel"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", printer \"%s\" serveril \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "T枚枚mood"
+msgid "Error"
+msgstr "Viga"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "K盲ivituslogo"
+msgid "allow \"su\""
+msgstr "\"su\" lubamine"
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "LiLo ekraan"
+msgid "Australia"
+msgstr "Austraalia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Valige teema LiLo-le\n"
-"ja k盲ivituslogole,\n"
-"neid v玫ib valida\n"
-"ka eraldi"
+msgid "please wait during ttmkfdir..."
+msgstr "palun oodake, k盲ib ttmkdir..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Teemad"
+msgid "Configure only card \"%s\"%s"
+msgstr "Seadista ainult kaart \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "K盲ivituslogo valik"
+msgid "Level"
+msgstr "Tase"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Change the printing system"
+msgstr "Tr眉kkimiss眉steemi muutmine"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"Praegu on Teil alglaadimise haldurina kasutusel %s.\n"
-"Valige seadistamisn玫ustaja k盲ivitamiseks 'Seadista'."
+"S眉steemis on v玫imalik kasutada mitut monitori.\n"
+"Mida Te soovite teha?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo ja k盲ivituslogo teemade paigaldus 玫nnestus"
+msgid "Configure services"
+msgstr "Teenuste s盲tted"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Teema paigaldamine eba玫nnestus!"
+msgid "Broadcast Address:"
+msgstr "脺ldlevi aadress:"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Notice"
-msgstr "M盲rguanne"
+msgid "mount failed: "
+msgstr "haakimine eba玫nnestus: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
+"GNU/Linuxi kernel peab alglaadimise ajal ajaarvesti l盲htestamiseks sooritama "
+"kalkulatsioonisilmuse. Selle tulemus salvestatakse bogomipsides, mis "
+"kujutab endast omamoodi CPU \"j玫udlustesti\"."
+
+#: ../../any.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Taask盲ivita 'lilo'"
+msgid "Image"
+msgstr "Laadefail"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-"LiLo taask盲ivitamine eba玫nnestus!\n"
-"K盲ivitage \"lilo\" administraatorina k盲surealt LiLo teema paigaldamise "
-"l玫petamiseks."
+"Printeri \"%s\" lisamine StarOffice/OpenOffice.org/GIMP-ile eba玫nnestus."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Loo initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Remote Administration"
+msgstr "Kaughaldus"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "mkinitrd -f /boot/initrd-%s.img %s k盲ivitamine eba玫nnestus."
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr "2.2 kernelitel pole enam PCMCIA tuge. Kasutage palun 2.4 kernelit."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"/etc/sysconfig/bootsplash kirjutamine eba玫nnestus\n"
-"Faili ei leitud."
+msgid "Selected All"
+msgstr "K玫igi valimine"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Write %s"
-msgstr "Kirjuta %s"
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Tavaline UNIXi tr眉kkimiss眉steem"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "/etc/sysconfig/bootsplash kirjutamine eba玫nnestus."
+msgid "Webmin Service"
+msgstr "Webmin teenus"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo message not found"
-msgstr "LiLo s玫numit ei leitud"
+msgid "device"
+msgstr "seade"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Tee %s -st koopia %s"
+msgid "All"
+msgstr "K玫ik"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Tee %s -st varukoopia %s.old"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Millist tr眉kkimiss眉steemi (spuulerit) soovite kasutada?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Uue teema loomine"
+msgid "Greece"
+msgstr "Kreeka"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Teema n盲itamine\n"
-"konsoolis"
+msgid "An error occurred"
+msgstr "Tekkis mingi viga"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Teemade paigaldamine"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Selle paketi peaks uuendama.\n"
+"Olete kindel, et Te ei vali seda?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "LiLo/grub resiim"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamili (kirjutusmasin)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot resiim"
+msgid "manual"
+msgstr "k盲sitsi"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "Printer manufacturer, model, driver"
+msgstr "Printeri tootja, mudel, draiver"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fail/_V盲lju"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Andmekandja puudub seadmes %s v玫i on kirjutuskaitsega.\n"
+"Sisestage palun andmekandja."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Fail"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Kataloogis %s on juba andmed\n"
+"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Alglaaduri stiil"
+msgid "Printer on NetWare server"
+msgstr "NetWare printserver"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Brauserit ei leitud! Palun paigaldage m玫ni"
+msgid "Give the ram size in MB"
+msgstr "Anna m盲lu suurus megabaitides"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "眉henduse loomine Bugzilla n玫ustajaga ..."
+msgid "Real name"
+msgstr "P盲risnimi"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Package not installed"
-msgstr "Pakett ei ole paigaldatud"
+msgid "done"
+msgstr "tehtud"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not installed"
-msgstr "Pole paigaldatud"
+msgid "Please uncheck or remove it on next time."
+msgstr "Palun t眉histage valik v玫i eemaldage j盲rgmisel korral."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Autonoomsed vahendid"
+msgid "Higher"
+msgstr "Veel k玫rgem"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Report"
-msgstr "Raport"
+msgid "Choose the partitions you want to format"
+msgstr "Valige partitsioonid, mida soovite vormindada"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Teie masinal ei leitud TV-kaarti. Kontrollige palun, et Linuxi toega video/"
+"TV-kaart on korrektselt 眉hendatud.\n"
"\n"
"\n"
-"Veateate edastamiseks vajutage nupule 'Raport'.\n"
-"See avab veebilehitseja akna aadressil https://drakbug.mandrakesoft.com,\n"
-"kus leiate eest t盲itmist ootava vormi. 脺lal n盲idatud info kantakse\n"
-"serverile 眉le.\n"
+"Meie riistvara andmebaasi saate k眉lastada aadressil:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "V盲ljalase: "
+msgid "Can't find %s on %s"
+msgstr "%s leidmine %s -l eba玫nnestus"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
+msgid "Japanese 106 keys"
+msgstr "Jaapani 106 klahviga"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Pakett:"
+msgid "This will take a few minutes."
+msgstr "Selleks kulub p盲ris mitu minutit."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Rakendus:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Seadistamise n玫ustajad"
+msgid "Use scanners on remote computers"
+msgstr "Sk盲nnerite kasutamine kaugmasinatel"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Kustuta valitud reegel"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Windowsi 眉mberkolimise vahend"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Ligip盲盲s printeritele CUPS printserveril"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Pange flopi seadmesse %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Tarkvarahaldur"
+msgid "Maldives"
+msgstr "Maldiivid"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Kaugjuhtimine"
+msgid "compact"
+msgstr "kompaktne"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minut"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "kanalil %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", mitme funktsiooniga seade"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "S眉nkroniseerimisvahend"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Sobivat FAT-partitsiooni ei leitud (ei ole piisavalt ruumi)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Esimese korra n玫ustaja"
+msgid "Up"
+msgstr "脺les"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake juhtimiskeskus"
+msgid "Firewall"
+msgstr "Tulem眉眉r"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake veateate abivahend"
+msgid "Area:"
+msgstr "Piirkond:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parameetrid"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA kontrollerid"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Interneti眉henduse seadistamine"
+msgid "Printer Server"
+msgstr "Printserver"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP klient"
+msgid "Disconnection from the Internet complete."
+msgstr "Interneti眉hendus on katkestatud."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "V玫rgukaart"
+msgid "Custom configuration"
+msgstr "Kohandatud s盲tted"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Vaikel眉眉s"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Andke palun paigalduslaadefaili asukoht.\n"
+"\n"
+"Kui Teil s盲herdust kataloogi ei ole, kopeerige palun CD v玫i DVD sisu.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "脺henduse t眉眉p: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre ja Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profiil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Varukoopia taastamise probleemid:\n"
+"\n"
+"Taastamise ajal kontrollib Drakbackup enne taastamist\n"
+"k玫iki Teie varukoopiafaile.\n"
+"Enne taastamist eemaldab Drakbackup Teie originaalkataloogi\n"
+"ja Te kaotate k玫ik oma andmed. Seep盲rast on oluline olla\n"
+"hoolikas ja mitte muuta varundatud andmefaile k盲sitsi.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Interneti眉henduse seadistamine"
+msgid "saving Bootsplash theme..."
+msgstr "K盲ivituslogo teema salvestamine..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Teil ei ole Interneti眉hendust.\n"
-"Looge see kl玫psuga nupul 'Seadista'"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Seda liidest ei ole veel seadistatud.\n"
-"K盲ivitage peaaknas seadistamise n玫ustaja"
+msgid "Do you have another one?"
+msgstr "On Teil veel kaarte?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktiveeri n眉眉d"
+msgid ", printing to %s"
+msgstr ", tr眉kkimine masinal %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "peata n眉眉d"
+msgid "Assign host name from DHCP address"
+msgstr "Omista masinanimi DHCP aadressist"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP klient"
+msgid "Toggle to normal mode"
+msgstr "Ekspert > Tavakasutaja"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "K盲ivitub laadimisel"
+msgid "Generic"
+msgstr "Tavaline"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Laadimisprotokoll"
+msgid "Cylinder %d to %d\n"
+msgstr "Silindrid %d kuni %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "V玫rgukaart %s: %s"
+msgid "New profile..."
+msgstr "Uus profiil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "LAN s盲tted"
+msgid "Which disk do you want to move it to?"
+msgstr "Millisele kettale soovite seda 眉mber paigutada?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "LAN s盲tted"
+msgid "Display logo on Console"
+msgstr "Logo n盲itamine konsoolil"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"脺htegi liidest ei ole seadistatud.\n"
-"Esmalt tuleb need seadistada, kl玫psake selleks nupul 'Seadista'"
+msgid "Windows Domain"
+msgstr "Windowsi domeen"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "脺henda..."
+msgid "Interface %s (on network %s)"
+msgstr "Liides %s (v玫rgus %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Lahuta..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Ei ole 眉hendatud"
+msgid "Wallis and Futuna"
+msgstr "Wallis ja Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "脺hendatud"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Esmalt tuleb luua /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Kas FPU on olemas"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Ei leitud 眉htegi sk盲nnerit, mida s眉steem saaks kasutada.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Hoiatus, avastati veel 眉ks Interneti眉hendus, mis v玫ib-olla kasutab Teie v玫rku"
+"Selle teenuse kohta\n"
+"ei oska lisainfot anda."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Liides:"
+msgid "Build Single NIC -->"
+msgstr "Loo ainus v玫rgukaart -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Vaikel眉眉s:"
+msgid "Is this correct?"
+msgstr "Kas see on sobiv?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Rakenda"
+msgid "Marshall Islands"
+msgstr "Marshalli saared"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Kl玫psake siia n玫ustaja k盲ivitamiseks ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "N玫ustaja..."
+msgid "Root password"
+msgstr "Administraatori salas玫na"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Olek:"
+msgid "Build All Kernels -->"
+msgstr "Loo k玫ik kernelid -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "T眉眉p: "
+msgid "if set to yes, report unowned files."
+msgstr "kui on 'jah', teatab omanikuta failidest."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Interneti眉hendus"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Saaleala ei ole m盲盲ratud.\n"
+"\n"
+"Kas ikkagi j盲tkata?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Masinanimi: "
+msgid "Server IP missing!"
+msgstr "Serveri IP puudub!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Kohtv玫rgu (LAN) seadistamine..."
+msgid "Suriname"
+msgstr "Suriname"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Olek"
+msgid "Enable ACPI"
+msgstr "ACPI lubamine"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Juhtprogramm"
+msgid "Graphical Environment"
+msgstr "Graafiline keskkond"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokoll"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Liides"
+msgid "on Tape Device"
+msgstr "lindiseadmele"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Interneti眉henduse seadistamine..."
+msgid "Do nothing"
+msgstr "脛ra tee midagi"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Palun oodake"
+msgid "Delete Client"
+msgstr "Kustuta klient"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Loodava profiili nimi (uus profiil luuakse praeguse koopiana) :"
+msgid "Filesystem type: "
+msgstr "Failis眉steemi t眉眉p: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Uus profiil..."
+msgid "Starting network..."
+msgstr "V玫rgu k盲ivitamine..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Kustutatav profiil:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Kustuta profiil..."
+msgid "/_Fields description"
+msgstr "/V盲lja_de kirjeldus"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "V玫rgus盲tted (%d liidest)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Turvalisus, nagu Teile meeldib"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 kuvahaldur v玫imaldab Teil graafiliselt sisse logida\n"
-"s眉steemi, kus t枚枚tab X Window System, samuti toetab see korraga \n"
-"mitme X-seansi k盲ivitamist ja neis t枚枚tamist."
+msgid "Help"
+msgstr "Abi"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Kuvahalduri valimine"
+msgid "Your personal phone number"
+msgstr "Teie telefoninumber"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Kui palju ruumi j盲tate Windowsi jaoks?"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Mkbootdiski korrektne sulgemine eba玫nnestus: \n"
-" %s \n"
-" %s"
+"Testlehek眉lg on saadetud printerile.\n"
+"N眉眉d v玫ib minna natuke aega, enne kui printer alustab.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Fork eba玫nnestus: %s"
+msgid "Username required"
+msgstr "Kasutajatunnuse n玫udmine"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Andmekandja puudub seadmes %s v玫i on kirjutuskaitsega.\n"
-"Sisestage palun andmekandja."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Kontrollige, et andmekandja on seadmes %s"
+"Tavaliselt valib DrakX klaviatuuri Teie eest juba 盲ra (s玫ltuvalt valitud\n"
+"keelest). Kuid see v玫ib tekitada olukorra, kus Teil ikkagi pole just see\n"
+"klaviatuur, mida soovite: kui olete n盲iteks inglise keelt k玫nelev\n"
+"拧veitslane, v玫ite siiski soovida 艩veitsi asetusega klaviatuuri. Teine kohe\n"
+"p盲he tulev juhtum on inglise keele k玫neleja Quebecis. M玫lemal juhul on\n"
+"m玫tet naasta paigalduse selle sammu juurde ja valida loendist vajalik\n"
+"klaviatuur.\n"
+"\n"
+"Kl玫psake nupul \"%s\", mis n盲itab k玫iki toetatud klaviatuure.\n"
+"\n"
+"Kui valite mitte-ladina t盲hestikuga klaviatuuri, palutakse Teil j盲rgmises\n"
+"dialoogis valida klahv v玫i klahvikombinatsioon, mis vahetab ladina ja\n"
+"mitte-ladina asetusega klaviatuuri."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Ketta loomine"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) printeri s盲tted"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "V盲ljund"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Argumendid: (arg)\n"
+"\n"
+"Aktsepteerib/l眉kkab tagasi IPv4 v玫ltsveateated."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Eemalda moodul"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd lisaargumendid"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Lisa moodul"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Lehitsege veebi Mozilla v玫i Konqueroriga, lugege e-posti Evolutioni v玫i "
+"KMailiga, looge oma dokumendid OpenOffice.org abil."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "scsi moodulite vahelej盲tt"
+msgid "Protocol for the rest of the world"
+msgstr "Protokoll 眉lej盲盲nud maailma tarbeks"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "kui vaja"
+msgid "Print test pages"
+msgstr "Tr眉ki testlehek眉lg(i)"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "raid moodulite vahelej盲tt"
+msgid "64 MB or more"
+msgstr "64 MB v玫i rohkem"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "sunni peale"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Valige palun testlehek眉ljed, mida tr眉kkida.\n"
+"M盲rkus: fototesti tr眉kkimine v玫ib v玫tta 眉sna kaua aega ning liiga v盲hese "
+"m盲luga laserprinteritel ei pruugi see 眉ldse 玫nnestuda. Enamasti peaks "
+"piisama tavalise testlehek眉lje tr眉kkimisest."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd lisaargumendid"
+msgid "Please select the device where your %s is attached"
+msgstr "Valige palun seade, kuhu %s on 眉hendatud"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Ekspertidele"
+msgid "Not formatted\n"
+msgstr "Vormindamata\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "kerneli versioon"
+msgid "Periodic Checks"
+msgstr "Perioodiline kontroll"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "tavaline"
+msgid "PXE Server Configuration"
+msgstr "PXE serveri seadistamine"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "脺ldine"
+msgid "Backup the system files before:"
+msgstr "Varunda s眉steemsed failid, mis on loodud enne:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "alglaadimisketta loomine"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"See on sobilik turvatase arvutile, mis 眉hendatakse Internetti kui klient."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Esimene flopiseade"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Suurus"
+msgid "/File/_Quit"
+msgstr "/Fail/_V盲lju"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Mooduli nimi"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Eemaldamisj盲rgsed seadistused"
+msgid "Choose the new size"
+msgstr "Valige uus suurus"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Fontide eemaldamine Teie s眉steemist"
+msgid "Media class"
+msgstr "Andmekandja klass"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "K盲ivitustestid"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s on Scannerdrake praegusele versioonile tundmatu."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Paigaldusj盲rgsed seadistused"
+msgid "Faroe Islands"
+msgstr "F盲盲ri saared"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Fontide paigaldamine ja teisendamine"
+msgid "Restart XFS"
+msgstr "XFS taask盲ivitamine"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Fontide kopeerimine Teie s眉steemi"
+msgid "Add host/network"
+msgstr "Lisa masin/v玫rk"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Eemalda loend"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"kui on 'jah', kontrollib t眉hja salas玫na /etc/shadow-s ning kasutajaid id-ga "
+"0, kes pole aga administraatorid."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "K玫igi valimine"
+msgid "Please enter the directory to save to:"
+msgstr "Sisestage palun kataloog, kuhu salvestada:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "T眉hista k玫igi valimine"
+msgid "Model name"
+msgstr "Mudeli nimi"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "kui mitte, siis siia."
+msgid "Albania"
+msgstr "Albaania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "kui olete kindel, kl玫psake siia."
+msgid "No CDR/DVDR in drive!"
+msgstr "CDR/DVDR ei ole seadmes!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Paigaldusloend"
+msgid "British Indian Ocean Territory"
+msgstr "Briti India ookeani ala"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Valige fondifail v玫i kataloog ja kl玫psake 'Lisa'"
+msgid "Normal Mode"
+msgstr "Tavakasutus"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Enne fontide paigaldamist kontrollige, et Teil on 玫igus neid oma s眉steemis "
-"kasutada ja paigaldada.\n"
+"Kontrollige palun, et cron-deemon oleks teenustega kaasatud.\n"
"\n"
-" Fonte saab paigaldada normaalsel meetodil. Haruharva v玫ivad vigased fondid "
-"panna k眉ll X Serveri hanguma."
+"Pange t盲hele, et praegu kasutavad k玫vaketast ka k玫ik 'v玫rgu'-andmekandjad."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Tavalised printerid"
+msgid "Printer connection type"
+msgstr "Printeri 眉hendusviis"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Teie s眉steemis ei ole v玫rgukaarti!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "V玫rk %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malajalami"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Valige rakendused, millel on fontide tugi:"
+msgid "Option %s out of range!"
+msgstr "V玫ti %s v盲ljub piiridest!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002: MandrakeSoft \n"
-"\tDUPONT Sebastien (esialgne versioon)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" K盲esolev rakendus on vaba tarkvara. Te v玫ite seda edasi levitada\n"
-" ja/v玫i muuta vastavalt GNU 脺ldise Avaliku Litsentsi tingimustele, nagu\n"
-" need on avaldanud Vaba Tarkvara Fond; kas Litsentsi versioon number 2\n"
-" v玫i (vastavalt Teie valikule) 眉ksk玫ik milline hilisem versioon.\n"
-"\n"
-" Seda rakendust levitatakse lootuses, et see on kasulik, kuid\n"
-" ILMA IGASUGUSE GARANTIITA; isegi KESKMISE/TAVALISE\n"
-" KVALITEEDI GARANTIITA v玫i SOBIVUSELE TEATUD KINDLAKS\n"
-" EESM脛RGIKS. 脺ksikasjade suhtes vaadake GNU 脺ldist Avalikku Litsentsi.\n"
-"\n"
-" Te peaks olema saanud GNU 脺ldise Avaliku Litsentsi koopia koos selle\n"
-" rakendusega; kui ei, siis v玫tke 眉hendust Vaba Tarkvara Fondiga aadressil:\n"
-" Free Software Foundation, 59 Temple Place - Suite 330, Boston,\n"
-" MA 02111-1307, USA.\n"
-"\n"
-" T盲name:\n"
-" - pfm2afm: \n"
-"\t autor: Ken Borgendale:\n"
-"\t teisendab Windowsi .pfm-faili .afm-failiks (Adobe fondimeetrika)\n"
-" - type1inst:\n"
-"\t autor: James Macnicol: \n"
-"\t type1inst tekitab failid fonts.dir fonts.scale ja Fontmap.\n"
-" - ttf2pt1: \n"
-"\t autorid: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergei Babkin \n"
-" teisendab ttf-fondifailid afm- ja pfb-fontideks\n"
-"\n"
-"\n"
+msgid "Connect %s"
+msgstr "%s 眉henduse loomine"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Misv盲rk"
+msgid "Restarting CUPS..."
+msgstr "CUPSi taask盲ivitamine..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Fontide loend"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Tr眉kkimine/skaneerimine/fotokaardid seadmel \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Muud valikud"
+msgid "Duplicate mount point %s"
+msgstr "Haakepunkt %s on m盲盲ratud topelt"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Fontide eemaldamine"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "kui on 'jah', k盲ivitab chkrootkit kontrolli."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Windowsi fontide hankimine"
+msgid "Connection Configuration"
+msgstr "Interneti眉henduse s盲tted"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Fontide importimine"
+msgid "Unknown|Generic"
+msgstr "Tundmatu|Tavaline"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "tehtud"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"On t玫en盲oline, et praegu, kui Te paigaldate Mandrake Linuxit, on m玫ned\n"
+"paketid j玫udnud p盲rast v盲ljalaset juba uuenduskuuri 眉le elada. M玫nes on 盲ra\n"
+"parandatud paar v盲iksemat viga, m玫nes turvaprobleemid. Et v玫iksite neist\n"
+"uuendustest tulu l玫igata, on Teil n眉眉d v玫imalik need Internetist alla "
+"laadida.\n"
+"Kl玫psake \"%s\", kui Teie interneti眉hendus t枚枚tab, v玫i \"%s\", kui "
+"eelistate\n"
+"pakette uuendada millalgi hiljem.\n"
+"\n"
+"Kui valite \"%s\", n盲idatakse Teile loendit kohtadega, kust uuendusi "
+"t玫mmata\n"
+"saab. Valige endale l盲him paik. Seej盲rel ilmub paketivaliku puu. Vaadake "
+"see\n"
+"眉le ning vajutage \"%s\", kui soovite valitud paketi(d) alla laadida ja\n"
+"paigaldada, v玫i \"%s\", kui Te ei soovi seda teha."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs taask盲ivitamine"
+msgid "Quit"
+msgstr "V盲lju"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Fondifailide kustutamine"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "XFS taask盲ivitamine"
+msgid "Auto allocate"
+msgstr "Paiguta ise"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Ajutiste failide kustutamine"
+msgid "Check bad blocks?"
+msgstr "Blokkide kontroll?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "type1inst loomine"
+msgid "Other MultiMedia devices"
+msgstr "Muud multimeediaseadmed"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm fontide teisendamine"
+msgid "No remote machines"
+msgstr "Ainult sellel masinal"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf fontide teisendamine"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Printeri seadistamise n玫ustaja\n"
+"\n"
+"N玫ustaja aitab Teil paigaldada printeri(d), mis on 眉hendatud selle "
+"arvutiga.\n"
+"\n"
+"Kui teil on printer(eid), mis on 眉hendatud selle masinaga, 眉hendage palun "
+"see/need arvutiga ja l眉litage sisse, et seda/neid saaks automaatselt "
+"tuvastada.\n"
+"\n"
+"Kui olete valmis, vajutage \"J盲rgmine\", v玫i \"Katkesta\", kui Te ei soovi "
+"praegu printeri(te) seadistamisega tegelda."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostcsripti m盲盲ratlused"
+msgid "Authentication NIS"
+msgstr "NIS autentimine"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Fontide teisendamine"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "S盲te ``Piira k盲surea suvandeid'' ei ole kasutatav ilma salas玫nata"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "TrueType paigaldus tehtud"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Interneti眉henduse jagamine t枚枚tab"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "palun oodake, k盲ib ttmkdir..."
+msgid "Card IO_0"
+msgstr "Kaardi IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "TrueType fontide paigaldamine"
+msgid "United Arab Emirates"
+msgstr "Araabia 脺hendemiraadid"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Fontide kopeerimine"
+msgid "Card IO_1"
+msgstr "Kaardi IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Fontide otsing paigaldatute loendis"
+msgid "Thailand"
+msgstr "Tai"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "ei suutnud fonte leida.\n"
+msgid "Routers:"
+msgstr "Ruuterid:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Korrektsete fontide uuestivalimine"
+msgid "Kazakhstan"
+msgstr "Kasahstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "ei suutnud haagitud partitsioonidel leida 眉htegi fonti"
+msgid "Display all available remote CUPS printers"
+msgstr "N盲ita k玫iki saadaolevaid CUPS printserveri printereid"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "fonte ei leitud"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linuxi paigaldamine %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "k玫igi fontide anal眉眉s"
+msgid "Thai keyboard"
+msgstr "Tai"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Paigaldatud fontide valiku t眉histamine"
+msgid "Dialup options"
+msgstr "DialUp parameetrid"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Paigaldatud fontide otsimine"
+msgid "Bouvet Island"
+msgstr "Bouvet' saar"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Kui porti ei ole m盲盲ratud, kasutatakse vaikimisi porti 631."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Interneti眉henduse jagamise n玫ustaja\n"
-"\n"
-"%s\n"
+"Vahetage CD-ROM!\n"
"\n"
-"Kl玫psake n玫ustaja k盲ivitamiseks nupul 'Seadista'."
+"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <Olgu>.\n"
+"Kui teil s盲herdust ei ole, vajutage <Katkesta>."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Interneti眉henduse jagamise seadistamine"
+msgid "Polish"
+msgstr "Poola"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneti眉henduse jagamist ei ole kunagi seadistatud."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneti眉henduse jagamine on juba seadistatud ja see on praegu aktiivne."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-v玫rk webdavi vahendusel.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Interneti眉henduse jagamine on juba seadistatud, aga hetkel keelatud."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"脺htki v玫rgukaarti ei suudetud tuvastada. Palun kasutage selleks riistvara "
+"seadistajat."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"K玫ik on seadistatud.\n"
-"N眉眉d saate Interneti眉hendust jagada teistele kohtv玫rgu arvutitele, kasutades "
-"neil automaatset konfigureerimist (DHCP)."
+msgid "Netmask"
+msgstr "V玫rgumask"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleemid paketi %s paigaldamisel"
+msgid "No hard drives found"
+msgstr "K玫vakettaid ei leitud"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "H盲盲lestan skriptid, paigaldan tarkvara, k盲ivitan serverid..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC seeria"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Seadistamine..."
+msgid "2 buttons"
+msgstr "2 nupuga"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "V玫imalik kohtv玫rgu aadressi konflikt %s seadistuses!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Millist ISDN 眉hendust kasutate?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Kohtv玫rgu l玫pus ei seisa '0', visatakse minema."
+msgid "Label"
+msgstr "Pealdis"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Liidese ja DHCP serveri 眉mberseadistamine"
+msgid "Save on floppy"
+msgstr "Salvesta flopile"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimaalne rendiaeg (sekundites)"
+msgid "Printer auto-detection"
+msgstr "Printeri automaattuvastus"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Rendiaeg vaikimisi (sekundites)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Milline on Teie ISDN kaart?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "DHCP vahemiku l玫pp"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS on UNIXi keskkonna standardne failijaotusprotokoll.\n"
+"See t盲idab NFS serveri funktsioone ja seadistatakse failis /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "DHCP vahemiku algus"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Sisemine domeeninimi"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Pange t盲hele, et pealdis on muutunud:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "Nimeserveri IP"
+msgid "Number of capture buffers:"
+msgstr "H玫ivepuhvrite arv:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Selle) DHCP serveri IP"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Teie valik? (0/1, vaikimisi '%s')"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"DHCP serveri s盲tted.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Siin saab valida erinevaid v玫imalusi DHCP serveri seadistustele.\n"
-"Kui te ei tea m玫ne valiku t盲hendust, j盲tke see puutumata.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Kohtv玫rgu aadress"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Teie praegused s盲tted on v玫imalik s盲ilitada ja eeldada, et DHCP server on "
-"juba seadistatud. Sellisel juhul kontrollige, et v玫rk, mida kasutate "
-"kohtv玫rgu tarbeks, on 玫igesti tuvastatud. Seda ei hakata 眉mber seadistama "
-"ega Teie DHCP serveri s盲tteid muutma.\n"
+"K玫ik v盲rskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
+"ehk sinna tuleb luua failis眉steemid.\n"
"\n"
-"Vaikimisi DNS kirje on tulem眉眉ri poolt seadistatud puhverdav nimeserver. See "
-"on v玫imalik asendada n盲iteks Teie ISP DNSi IP-ga.\n"
-"\t\t \n"
-"Vastasel juhul seadistan Teie liidese 眉mber ja seadistan (眉mber) ka DHCP "
-"serveri.\n"
+"Samuti v玫ib vormindada varem olemas olnud partitsioonid, kui soovite\n"
+"seal leiduvad andmed 盲ra kustutada.\n"
+"\n"
+"Pange t盲hele, et alati ei ole k玫igi vanade partitsioonide vormindamine\n"
+"vajalik. Kindlasti tuleb vormindada partitsioonid, kus varem asus \"/\", \"/"
+"usr\"\n"
+"v玫i \"/var\", aga kasutajate faile sisaldav \"/home\" v玫iks j盲盲da alles.\n"
+"\n"
+"Olge partitsioonide valikul hoolas. P盲rast vormindamist on k玫ik valitud\n"
+"partitsioonidel asunud andmed kustutatud ning neid ei ole v玫imalik "
+"taastada.\n"
+"\n"
+"Kl玫psake \"%s\", kui olete vormindamiseks valmis.\n"
+"\n"
+"Kl玫psake \"%s\", kui soovite valida oma uue Mandrake Linuxi s眉steemi\n"
+"paigaldamiseks m玫ne muu partitsiooni.\n"
"\n"
+"Kl玫psake \"%s\", kui soovite valida partitsioone, millel kontrollitaks "
+"halbade\n"
+"blokkide olemasolu."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Prantsuse"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "T拧ehhi (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Toimub tuvastamine.."
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "V玫rguseade"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Kokkuv玫te"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"'%s' praegused s盲tted:\n"
-"\n"
-"V玫rk: %s\n"
-"IP aadress: %s\n"
-"IP omistamine: %s\n"
-"Juhtprogramm: %s"
+" (paralleelpordid: /dev/lp0, /dev/lp1..., millele teistes s眉steemides vastab "
+"LPT1:, LPT2:...; esimene USB printer: /dev/usb/lp0, teine USB printer: /dev/"
+"usb/lp1...)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Liidese praegused s盲tted"
+msgid "Next"
+msgstr "J盲rgmine"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Liidese praeguste s盲tete n盲itamine"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Alglaadurit ei ole v玫imalik paigaldada partitsioonile %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ei (ainult eksperdile)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automaatne 眉mberseadistamine"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Hoiatus: v玫rgukaart (%s) on juba seadistatud.\n"
"\n"
-"Kas soovite ette v玫tta automaatse 眉mberseadistamine?\n"
+"Tere tulemast!\n"
"\n"
-"Seda saab teha ka k盲sitsi, aga siis peate kindlasti teadma, mida teete."
+"Automaatpaigalduse parameetrid on n盲ha vasakul"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "V玫rguliides on juba seadistatud"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Palun valige, millist v玫rguliidest soovite kasutada kohtv玫rgu jaoks."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"korrektseks t枚枚tamiseks on vajalik pakett 'ImageMagick'.\n"
+"Kl玫psake \"Olgu\" paketi 'ImageMagick' paigaldamiseks\n"
+"v玫i \"Katkesta\" v盲ljumiseks."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Leedu \"numbrireaga\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Teil on vaid 眉ks seadistatud v玫rguliides:\n"
+"S眉steemi uuendamiseks tuleb eemaldada j盲rgmised paketid: %s\n"
"\n"
-"%s\n"
"\n"
-"Kohtv玫rgu s盲tted seotakse selle liidesega."
+"Kas t玫esti eemaldada need paketid?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "V玫rguliides"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"脺htki v玫rgukaarti ei suudetud tuvastada. Palun kasutage selleks riistvara "
-"seadistajat."
+msgid "NIS Domain"
+msgstr "NIS domeen"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Teie s眉steemis ei ole v玫rgukaarti!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- kasutaja failid.\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Liides %s"
+msgid "Antarctica"
+msgstr "Antarktika"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liides %s (kasutab moodulit %s)"
+msgid "Mount options"
+msgstr "Haakimise valikud"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "V玫rguseade"
+msgid "Jamaica"
+msgstr "Jamaica"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Palun sisestage Interneti眉hendust teostava seadme nimi.\n"
-"\n"
-"N盲ited:\n"
-"\t\tppp+ modemi- v玫i DSL 眉henduse korral. \n"
-"\t\teth0 v玫i eth1 kaabli眉henduse korral, \n"
-"\t\tippp+ ISDN 眉henduse korral.\n"
+"Toorseadmete seostamine blokkseadmetega\n"
+"(n盲iteks k玫vaketta partitsioonid)\n"
+"selliste rakenduste, nagu Oracle v玫i DVD m盲ngijad tarbeks"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"N眉眉d on Teil v玫imalik seadistada oma arvutit Interneti眉hendust jagama.\n"
-"Selle v玫imaluse abil saavad teised Teie kohtv玫rgu arvutid kasutada selle "
-"masina Interneti眉hendust.\n"
-"\n"
-"Kontrollige enne j盲tkamist, et olete seadistanud oma v玫rgu/Interneti眉henduse "
-"drakconnecti abil.\n"
+"Argumendid: (arg, alert=1)\n"
"\n"
-"M盲rkus: kohtv玫rgu (LAN) jaoks on vajalik eraldi v玫rgukaardi olemasolu."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Interneti眉henduse jagamine"
+"Nimelahenduse v玫ltsimiskaitse lubamine/keelamine. Kui\n"
+"\\fIalert\\fP on t玫ese v盲盲rtusega, saadab ka raporti syslog-i."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Interneti眉henduse jagamine n眉眉d t枚枚tab."
+msgid "Please wait, preparing installation..."
+msgstr "Palun oodake, valmistun paigalduseks..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Serverite k盲ivitamine..."
+msgid "Czech (QWERTZ)"
+msgstr "T拧ehhi (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
-msgstr "t眉histada"
+msgid "Track network card id (useful for laptops)"
+msgstr "V玫rgukaadi id tuvastus (kasulik s眉learvutite puhul)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "uuesti seadistada"
+msgid "The port number should be an integer!"
+msgstr "Pordi number peab olema t盲isarv!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "enable"
-msgstr "lubada"
+msgid "You must choose an image file first!"
+msgstr "Esmalt tuleb valida pildifail!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneti眉henduse jagamine on juba seadistatud,\n"
-"aga hetkel on see keelatud.\n"
-"\n"
-"Mida soovite ette v玫tta?"
+msgid "Restore from Hard Disk."
+msgstr "Taastamine k玫vakettalt."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneti眉hendust hetkel ei jagata"
+msgid "Add to LVM"
+msgstr "Lisa LVMi"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Interneti眉hendust n眉眉d enam ei jagata."
+msgid "DNS server"
+msgstr "Nimeserver"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Serverite peatamine..."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad ja Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "keelata"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD ja LPRng ei toeta IPP printereid.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneti眉henduse jagamine on juba seadistatud\n"
-"ja see on ka praegu aktiivne.\n"
-"\n"
-"Mida soovite ette v玫tta?"
+msgid "simple"
+msgstr "lihtne"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneti眉henduse jagamine t枚枚tab"
+msgid "Clear all"
+msgstr "Kustuta k玫ik"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Vabandust, me toetame ainult 2.4 kerneleid."
+msgid "No test pages"
+msgstr "脛ra tr眉ki"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Teie arvutis ei ole veel brauserit. Palun paigaldage see, kui soovite "
-"abiinfot vaadata"
+msgid "Adapter %s: %s"
+msgstr "V玫rgukaart %s: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Asukoht"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandi saared (Malviinid)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "grupp :"
+msgid "Unknown model"
+msgstr "Tundmatu mudel"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "kasutaja :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "kui on 'jah', kontrollib k玫igi kirjutatavaid faile/katalooge."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Asukoha valik"
+msgid "authentication"
+msgstr "autentimisviis"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "m盲rkimise korral ei muudeta omanikku ja gruppi"
+msgid "Backup Now"
+msgstr "Varunda n眉眉d!"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "K盲ivitamiseks kasutatakse grupi id-d"
+msgid "/_File"
+msgstr "/_Fail"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "K盲ivitamiseks kasutatakse omaniku id-d"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Printeri eemaldamine StarOffice/OpenOffice.org/GIMP-ilt"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-"Kasutusel kataloogis:\n"
-" ainult faili v玫i kataloogi omanik saab seda kustutada"
+"K盲ivitab paketifiltri Linuxi kerneliseeriale 2.2 ning loob\n"
+"tulem眉眉ri, mis kaitseb Teie masinat r眉nnakute eest Internetist."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamili (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "kleepumisbitt"
+msgid "Creating auto install floppy..."
+msgstr "Kiirpaigaldusflopi loomine..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Property"
-msgstr "Omadus"
+msgid "Searching for scanners ..."
+msgstr "Sk盲nnerite otsimine..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Loabitid"
+msgid "Partitioning"
+msgstr "K玫vaketta jagamine"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Current user"
-msgstr "Praegune kasutaja"
+msgid "Russia"
+msgstr "Venemaa"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr "lehitse"
+msgid "ethernet card(s) detected"
+msgstr "v玫rgukaart(i) leiti 眉les"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
-msgstr "Muuda praegust reeglit"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
-msgstr "muuda"
+msgid "Can't create catalog!"
+msgstr "Kataloogi ei 玫nnestunud luua!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Kustuta valitud reegel"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Viige oma turvalisuse seadistamine t盲iuseni h玫lpsasti kasutatava tarkvara "
+"abil, mis 眉hendab 眉limalt t玫husaid komponente, n盲iteks tulem眉眉r, virtuaalse "
+"erav玫rgu (VPN) server ja klient, r眉nnakute avastamise s眉steem ja "
+"v玫rguliikluse haldur."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "delete"
-msgstr "kustuta"
+msgid "Not enough free space for auto-allocating"
+msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Uue reegli lisamine l玫ppu"
+msgid "Set root password"
+msgstr "Juurkasutaja salas玫na"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "add a rule"
-msgstr "lisa reegel"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Pole teada 眉htegi vabavara-juhtprogrammi Teie helikaardile (%s), kuid on "
+"olemas tootja juhtprogramm, mille asukoht on \"%s\"."
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Valitud reegel 眉ks tase allapoole"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Partitsiooni %s suuruse muutmisel h盲vivad sellel k玫ik andmed"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Down"
-msgstr "Alla"
+msgid "Internet connection configuration"
+msgstr "Interneti眉henduse seadistamine"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Valitud reegel 眉ks tase 眉lespoole"
+msgid "Scanning for TV channels"
+msgstr "Telekanalite otsing"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
-msgstr "脺les"
+msgid "Kernel:"
+msgstr "Kernel:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "loafaili valik vaatamiseks/muutmiseks"
+msgid "/_About..."
+msgstr "/_Misv盲rk"
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm on kasutatav failide vaatamiseks, et mseci abil parandada loabitte, "
-"omanikke ja gruppe.\n"
-"V玫ite ka muuta oma reegleid, mis t眉histavad vaikereeglid."
+msgid "Bengali"
+msgstr "Bengali"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "permissions"
-msgstr "loabitid"
+msgid "Preference: "
+msgstr "Eelistus: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "group"
-msgstr "grupp"
+msgid "Wizard..."
+msgstr "N玫ustaja..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "user"
-msgstr "kasutaja"
+msgid "Services: %d activated for %d registered"
+msgstr "Teenused: %d aktiveeritud, kokku %d"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "path"
-msgstr "asukoht"
+msgid "Create a bootdisk"
+msgstr "Alglaadimisflopi loomine"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Faili auto_install.cfg asukoht"
+msgid "Solomon Islands"
+msgstr "Saalomoni saared"
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Andke palun faili auto_install.cfg asukoht.\n"
-"\n"
-"J盲tke t眉hjaks, kui Te ei soovi m盲盲rata automaatpaigalduse resiimi.\n"
-"\n"
+msgid "(module %s)"
+msgstr "(moodul %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"CD- ega DVD-laadefaili ei leitud, palun kopeerige paigaldusprogramm ja rpm-"
-"failid."
+msgid "Workgroup"
+msgstr "T枚枚grupp"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "Laadefaili ei leitud!"
+msgid "Printer host name or IP"
+msgstr "Printeri masinanimi v玫i IP"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installation image directory"
-msgstr "Paigalduslaadefaili kataloog"
+msgid "Host Path or Module"
+msgstr "Masina kataloog v玫i moodul"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Andke palun paigalduslaadefaili asukoht.\n"
-"\n"
-"Kui Teil s盲herdust kataloogi ei ole, kopeerige palun CD v玫i DVD sisu.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Printeri nimi tohib sisaldada vaid t盲hti, numbreid ja alakriipsu"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP vahemiku l玫pu ip"
+msgid "Show current interface configuration"
+msgstr "Liidese praeguste s盲tete n盲itamine"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP vahemiku alguse ip"
+msgid "Development"
+msgstr "Arendus"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP server v玫imaldab teistel arvutitel sooritada alglaadimise PXE "
-"vahendusel antud aadressivahemikus.\n"
-"\n"
-"V玫rguaadress on %s, v玫rgumask %s.\n"
-"\n"
+msgid "Done"
+msgstr "Tehtud"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Liides %s (v玫rgus %s)"
+msgid "Web Server"
+msgstr "Veebiserver"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Palun valige, millist v玫rguliidest soovite dhcp serveri jaoks kasutada"
+msgid "\tDo not include System Files\n"
+msgstr "\ts眉steemsete failide k玫rvalej盲tmine\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "T拧iili"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"N眉眉d on Teil v玫imalik seadistada oma arvuti paigaldamaks PXE serverit DHCP "
-"serveri \n"
-"ja TFTP serveri rollis, et luua paigaldusserver.\n"
-"Selle v玫imaluse abil saavad teised Teie kohtv玫rgu arvutid kasutada seda "
-"masinat endale s眉steemi paigaldamiseks.\n"
+"Lexmarki pakutavad inkjet printerite draiverid toetavad ainult kohalikke "
+"printereid, mitte aga printereid kaugarvutitel v玫i printserveritel. 脺hendage "
+"palun oma printer kohalikku porti v玫i seadistage see masinal, millega "
+"printer on 眉hendatud."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Kontrollige enne j盲tkamist, et olete seadistanud oma v玫rgu/Interneti眉henduse "
-"drakconnecti abil.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Mitme funktsiooniga seade on automaatselt seadistatud ja suudab ka "
+"skaneerida. N眉眉d v玫ite skaneerida \"scanimage\" abil (\"scanimage -d hp:%s\" "
+"sk盲nneri m盲盲ramiseks, kui Teil on neid mitu) k盲surealt v玫i graafiliste "
+"liideste \"xscanimage\" v玫i \"xsane\" vahendusel. Kui kasutate GIMPi, v玫ite "
+"skaneerida ka men眉眉k盲suga \"Fail\"/\"Hangi\". Kui soovite rohkem infot, "
+"andke k盲sureal korraldus \"man scanimage\".\n"
"\n"
-"M盲rkus: kohtv玫rgu (LAN) jaoks on vajalik eraldi v玫rgukaardi olemasolu."
+"脛rge selle seadme puhul \"scannerdraket\" kasutage!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Paigaldusserveri seadistamine"
+msgid "(already added %s)"
+msgstr "(juba lisatud %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "PXE serveri seadistamine"
+msgid ", using command %s"
+msgstr ", kasutades k盲sku %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Palun oodake, s盲tin turvaparameetrid..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt- ja Shift-klahvid korraga"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Palun oodake, s盲tin turvataseme..."
+msgid "Flags"
+msgstr "Lipud"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Perioodiline kontroll"
+msgid "Add/Del Users"
+msgstr "Lisa/kustuta kasutaja"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "S眉steemi parameetrid"
+msgid "Host/network IP address missing."
+msgstr "Masina/v玫rgu IP aadress puudub."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "V玫rguparameetrid"
+msgid "weekly"
+msgstr "iga n盲dal"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "S盲tted"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Sisestatud masina/v玫rgu IP aadress ei ole korrektne.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "See on saadaolevate maade t盲ielik nimekiri"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternatiivne testlehek眉lg (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"S眉steemi turvalisuse kohandamiseks saab seadistada\n"
-"j盲rgmisi parameetreid. Seletuste saamiseks vaadake abivihjeid.\n"
+"Kui Teil on olemas k玫ik alltoodud CD-d, kl玫psake <Olgu>.\n"
+"Kui Teil ei ole 眉htki neist, kl玫psake <Katkesta>.\n"
+"Kui puuduvad m玫ned CD-d, m盲rkige vaid olemasolevad ja siis <Olgu>."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Turvaadministraator:"
+msgid "Wait please"
+msgstr "Palun oodake"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Turvahoiatused:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Turvatase:"
+msgid "Backup user files"
+msgstr "Kasutaja failide varundamine"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(vaikev盲盲rtus: %s)"
+msgid "New"
+msgstr "Uus"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standardne: see on tavaline turvatase, mida v玫ib soovitada arvutile, mis on "
-"Internetiga\n"
-" 眉hendatud kui klient.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"K玫rge: On juba m玫ningaid piiranguid, igal 枚枚l sooritatakse m盲rksa "
-"rohkem automaatseid kontrollimisi.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"V盲ga k玫rge: Turvalisus on piisav, et s眉steemi saaks kasutada serverina, mis "
-"v玫ib vastu v玫tta\n"
-" 眉hendusi paljudelt klientidelt. Kui Teie masin on Internetis "
-"vaid kui klient, oleks m玫ttekam\n"
-"\t valida madalam tase.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoiline: See sarnaneb eelmisele tasemele, ainult et s眉steem on t盲iesti "
-"suletud ja turvas盲tted\n"
-" maksimumi peale keeratud.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Turvaadministraator:\n"
-" Kui valitud on v玫imalus 'Turvahoiatused', saadetakse "
-"turvahoiatused sellele kasutajale (kasutajanimele\n"
-"\t v玫i e-posti aadressile)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"N眉眉d on k盲tte j玫udnud k玫ige olulisem hetk Teie arvuti turvalisuse "
+"tagamisel:\n"
+"Teil tuleb m盲盲rata \"administraatori\" parool. Administraator haldab kogu\n"
+"s眉steemi ja ainult temal on 玫igus uuendusi ette v玫tta, kasutajaid lisada, "
+"muuta\n"
+"kogu s眉steemi seadistusi ja nii edasi. Ehk teisis玫nu - administraator v玫ib "
+"teha\n"
+"k玫ike! Seep盲rast tuleks parool valida selline, mida oleks raske 盲ra arvata.\n"
+"DrakX 眉tleb Teile, kui parool tundub olevat liiga lihtne. Te v玫ite muidugi "
+"j盲tta\n"
+"ka parooli sisestamata, aga me soovitame v盲ga tungivalt seda siiski teha - \n"
+"kasv玫i juba sel p玫hjusel, et kuigi Te paigaldate endale GNU/Linuxi "
+"s眉steemi,\n"
+"ei t盲henda see veel, et vigu ette ei v玫iks tulla. Kuna administraator v玫ib\n"
+"k玫iki piiranguid muuta ning vahel tahtmatultki kustutada oma hooletu\n"
+"tegevusega k玫ik andmed mingilt partitsioonilt, on p盲ris oluline, et\n"
+"administraatoriks saamine ei oleks eriti lihtne.\n"
"\n"
+"Parool v玫ib koosneda nii t盲htedest kui numbritest ja peab olema v盲hemalt\n"
+"8 (kaheksa) m盲rki pikk. 脛rge pange kunagi administraatori parooli kirja - "
+"see\n"
+"v玫ib muuta ligip盲盲su Teie s眉steemile v玫玫rastele liiga h玫lpsaks.\n"
"\n"
+"V盲ike soovitus - 盲rge siiski parooli liiga keeruliseks v玫i pikaks ajage,\n"
+"sest l玫ppeks peaksite seda ju suutma ka meelde j盲tta!\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Kui Te parooli sisestate, seda ekraanil ei n盲idata. Te peate selle "
+"sisestama\n"
+"kaks korda, mis v盲ldib kirjutamisvea v玫imaluse. Siiski, kui teete 眉hesuguse\n"
+"vea kaks korda j盲rjest, on just see \"vigane\" parool, mida Teilt oodatakse\n"
+"administraatorina sisselogimisel.\n"
"\n"
+"Kui soovite, et ligip盲盲su k盲esolevale arvutile kontrolliks m玫ni\n"
+"autentimisserver, kl玫psake nupul \"%s\".\n"
"\n"
+"Kui Teie v玫rgus on kasutusel LDAP, NIS v玫i PDC Windowsi domeeni autentimise\n"
+"teenused, valige neist sobilik \"%s\". Kui Te aga ei juhtu teadma,\n"
+"mida teha, p枚枚rduge oma v玫rgu administraatori poole.\n"
"\n"
-"M盲rkus: kui Teil on ISA PnP helikaart, tuleb kasutada rakendust sndconfig. "
-"Selleks kirjutage k盲sureale \"sndconfig\"."
+"Kui Teil on probleeme salas玫na meelespidamisega, Teie arvuti ei ole\n"
+"眉hendatud 眉htegi administreeritavasse v玫rku v玫i Te usaldate t盲ielikult\n"
+"k玫iki, kes Teie arvutit kasutavad, on m玫ttekas valida \"%s\"."
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Teie masinas ei leitud helikaarti. Kontrollige palun, et Linuxi toega "
-"helikaart on korrektselt 眉hendatud.\n"
-"\n"
-"\n"
-"Meie riistvara andmebaasi saab n盲ha aadressil:\n"
-"\n"
+"N眉眉d on aeg valida masinale meelep盲rane turvatase. Rusikareeglina peaks\n"
+"turvatase olema seda k玫rgem, mida ligip盲盲sule avatum arvuti on ja mida "
+"rohkem\n"
+"leidub sellel olulise t盲htsusega andmeid. Samas t盲hendab k玫rgem turvatase\n"
+"眉ldiselt kasutamislihtsuse kahanemist.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Helikaarti ei leitud!"
+"Kui Te ei tea, mida valida, leppige pakutud v玫imalusega."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s k盲ivituslogo (%s) eelvaatlus"
+msgid "Load from floppy"
+msgstr "Laadi flopilt"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Eelvaatluse tekitamine ..."
+msgid "The following printer was auto-detected. "
+msgstr "See printer tuvastati automaatselt. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Esmalt tuleb valida pildifail!"
+msgid "Boot Floppy"
+msgstr "Alglaadimisflopi"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Edenemisriba v盲rvi valimine"
+msgid "Norwegian"
+msgstr "Norra"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Sellel teemal ei ole veel 眉htegi k盲ivituslogo %s !"
+msgid "Searching for new scanners ..."
+msgstr "Uute sk盲nnerite otsimine..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "K盲ivituslogo teema salvestamine..."
+msgid "Apache World Wide Web Server"
+msgstr "Apache veebiserver"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "valige pildifail"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Protsessori alamt眉眉p (nn stepping'u number) "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "valige pilt"
+msgid "select path to restore (instead of /)"
+msgstr "valige asukoht, kuhu taastada (kui ei ole /)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "K盲ivituslogo pildi seadistamine"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Vaikimisi kerneli s玫numi keelamine"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Logo n盲itamine konsoolil"
+msgid "China"
+msgstr "Hiina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "V盲rvi valimine"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Kontrollige, et k玫ik printerid on 眉hendatud ja sisse l眉litatud).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "Teema salvestamine"
+msgid "Georgia"
+msgstr "Gruusia"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "Eelvaatlus"
+msgid "Reading data of installed printers..."
+msgstr "Paigaldatud printerite andmete lugemine..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "edenemisriba v盲rv"
+msgid " Erase Now "
+msgstr " Puhasta n眉眉d! "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "edenemisriba k玫rgus"
+msgid "server"
+msgstr "server"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "edenemisriba laius"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Pange FAT-vormingus flopi seadmesse %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"edenemisriba 眉lemise vasaku\n"
-"nurga y-koordinaat"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "jah t盲hendab, et protsessoril on matemaatika-kaasprotsessor"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"edenemisriba 眉lemise vasaku\n"
-"nurga x-koordinaat"
+msgid "Please Wait... Applying the configuration"
+msgstr "Palun oodake... Rakendan seadistusi"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "tekstikasti k玫rgus"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "teksti laius"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"tekstikasti y-koordinaat\n"
-"arvulises v盲ljenduses"
+msgid "SCSI controllers"
+msgstr "SCSI kontrolerid"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"tekstikasti x-koordinaat\n"
-"arvulises v盲ljenduses"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " LPD serveril \"%s\", printer \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Lehitse"
+msgid "Choosing a display manager"
+msgstr "Kuvahalduri valimine"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Teema nimi"
+msgid "Zeroconf Host name"
+msgstr "Zefoconf masina nimi"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "l玫plik kuvatihedus"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP aadress peab olema kujul 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "esimene samm loomine"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"korrektseks t枚枚tamiseks on vajalik pakett 'ImageMagick'.\n"
-"Kl玫psake \"Olgu\" paketi 'ImageMagick' paigaldamiseks\n"
-"v玫i \"Katkesta\" v盲ljumiseks."
+msgid "Add an item"
+msgstr "Lisa element"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Teie masinal ei leitud TV-kaarti. Kontrollige palun, et Linuxi toega video/"
-"TV-kaart on korrektselt 眉hendatud.\n"
-"\n"
-"\n"
-"Meie riistvara andmebaasi saate k眉lastada aadressil:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Selle arvuti k眉lge 眉hendatud printerid on teistele k盲ttesaadavad"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "TV-kaarti ei leitud!"
+msgid "I can't find needed image file `%s'."
+msgstr "Ei suuda leida laadefaili '%s'."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "N眉眉d v玫ite xawtv t枚枚le panna (X Window keskkonnas!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"Helikaarti ei leitud. Proovige see leida p盲rast paigaldust \"harddrake\" abil"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Peatse j盲llen盲gemiseni!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"M盲盲rati vale port: %s\n"
+"脮ige m盲盲rang on \"port/tcp\" v玫i \"port/udp\", \n"
+"kus port on number 1 ja 65535 vahel."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ei ole paigaldatud!"
+msgid "Shell"
+msgstr "K盲surida"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Telekanalite otsingul tekkis viga"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Telekanalite otsing"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tom茅 ja Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Telekanalite otsingu edenemine ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "Sisselogimine kasutajanimega %s eba玫nnestus (vale parool?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Piirkond:"
+msgid "Azerbaidjani (latin)"
+msgstr "Aserbaid啪aani (ladina)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "Teles眉steem:"
+msgid "Package not installed"
+msgstr "Pakett ei ole paigaldatud"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Palun m盲rkige 盲ra\n"
-"oma teles眉steem ja riik"
+msgid "Become a MandrakeExpert"
+msgstr "Omandage Mandrake eksperdi kuulsus"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Austraalia Optus kaabli-TV"
+msgid "American Samoa"
+msgstr "Ameerika Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "Uus-Meremaa"
+msgid "Protocol"
+msgstr "Protokoll"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Prantsusmaa [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "Fontide kopeerimine Teie s眉steemi"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "Ida-Euroopa"
+msgid "Harddrake help"
+msgstr "HardDrake abi"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "L盲盲ne-Euroopa"
+msgid "Bogomips"
+msgstr "Bogomipsid"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Hiina (tele)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Mandrake terminaliserveri s盲tted"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Jaapan (kaabel)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackupi raporti 眉ksikasjad\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Jaapan (tele)"
+msgid "Restore all backups"
+msgstr "Taasta k玫ik varukoopiad"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kaabel)"
+msgid "if set to yes, check open ports."
+msgstr "kui on 'jah', kontrollib avatud porte."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (kaabel-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Andmekandja puhastamine v玫tab m玫ni hetk aega."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (kaabel)"
+msgid "You can't select/unselect this package"
+msgstr "Seda paketti ei saa valida/valimata j盲tta"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (tele)"
+msgid "Warning"
+msgstr "Hoiatus"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV ei ole paigaldatud!\n"
-"\n"
"\n"
-"Kui Teil on TV-kaart, kuid DrakX ei avastanud seda (failis \"/etc/modules\"\n"
-"puudub nii moodul bttv kui saa7134) ega paigaldanud ka xawtv-d, saatke\n"
-"palun k盲su \"lspcidrake -v -f\" tulemused aadressile \"install"
-"\\@mandrakesoft.com\",\n"
-"m盲rkides subjektireale \"Undetected TV card\".\n"
-"\n"
-"\n"
-"Te v玫ite selle paigaldada, andes administraatorina konsoolis k盲su\n"
-"\"urpmi xawtv\"."
+"- muud failid:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "esmane"
+msgid "Remote host name"
+msgstr "Kaugarvuti nimi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "teisene"
+msgid "deactivate now"
+msgstr "peata n眉眉d"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Kl玫ps seadmel vasakul asuvas puus n盲itab siin selle kohta k盲ivat infot."
+msgid "access to X programs"
+msgstr "ligip盲盲s X-i rakendustele"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Tundmatu"
+msgid "Computing the size of the Windows partition"
+msgstr "Vaba ruumi arvutamine Windowsi partitsioonil"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "Tundmatu"
+msgid "Italy"
+msgstr "Itaalia"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "\"%s\" k盲ib..."
+msgid "Name of printer"
+msgstr "Printeri nimi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "Seadistamisvahendi k盲vitamine"
+msgid "disable"
+msgstr "keelata"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Mooduli seadistamine"
+msgid "error unmounting %s: %s"
+msgstr "viga %s lahutamisel: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Info"
+msgid "Do it!"
+msgstr "N眉眉d!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Tuvastatud riistvara"
+msgid "Cayman Islands"
+msgstr "Kaimanisaared"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 versioon "
+msgid "%s not responding"
+msgstr "%s ei vasta"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Toimub tuvastamine..."
+msgid "Select model manually"
+msgstr "Mudeli valik k盲sitsi"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Autor:"
+msgid "Format"
+msgstr "Vorminda"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"See on HardDrake - Mandrake riistvara seadistamisvahend.\n"
-"Versioon:"
+"K玫ige tavalisem 眉hendusviis ADSL jaoks on pppoe.\n"
+"M玫nel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
+"Kui Te ei tea, kasutage pppoe-d"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "HardDrake info"
+msgid "Various"
+msgstr "Mitmesugust"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Misv盲rk"
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Vearaport"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Printerdrake ei suutnud m盲盲rata Teie printeri %s mudelit. Valige palun 玫ige "
+"mudel nimekirjast."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Kui valite seadme, n盲ete selle kohta infot v盲ljadel paremal asuvas paneelis "
-"(\"Info\")"
+"\n"
+"M盲rkige printer(id), mida soovite 眉le kanda, ning vajutage \n"
+"\"Kanna 眉le\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Valige seade !"
+msgid "PDQ"
+msgstr "PDQ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albaania"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Leedu"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompaktne"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Tuvastati mudel: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft on v盲lja valinud parima tarkvara just Teile"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
msgstr ""
-"V盲ljade kirjeldus:\n"
+"See on HardDrake - Mandrake riistvara seadistamisvahend.\n"
+"Versioon: %s\n"
+"Autor: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "HardDrake abi"
+msgid "Local files"
+msgstr "Kohalikud failid"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/V盲lja_de kirjeldus"
+msgid "maybe"
+msgstr "v玫ib olla"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Abi"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_V盲lju"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Paistab, et Teie videokaardil on TV OUT v盲ljund.\n"
+"Seda on v玫imalik kasutada j盲rgnevalt:\n"
+"\n"
+"脺hendage arvuti televiisoriga enne alglaadimist ja valige laademen眉眉st\n"
+" \"TVout\" \n"
+"\n"
+"Kas soovite seda kasutama hakata?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/_JAZZ ketaste automaattuvastus"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/_Modemite automaattuvastus"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Asusite seadistama tr眉kkimist Windowsi parooliga kontole. Samba kliendi "
+"arhitektuuri vea t玫ttu pannakse parool tavalise tekstina Samba kliendi "
+"k盲sureale, mida see kasutab tr眉kit枚枚 saatmiseks Windowsi serverile. Seej盲rel "
+"on tolle masina igal kasutajal v玫imalik parooli ekraanil n盲ha n盲iteks k盲suga "
+"\"ps auxwww\".\n"
+"\n"
+"Soovitame selle asemel kasutada 眉ht alltoodud alternatiividest (igatahes "
+"tuleks teil tagada, et Teie Windowsi serverile p盲盲sevad ligi ainult "
+"kohtv玫rgu masinad; selleks sobib h盲sti kasutada tulem眉眉ri):\n"
+"\n"
+"Kasutage Windowsi serveril paroolitut kontot, olgu selleks konto \"GUEST\" "
+"v玫i spetsiaalne tr眉kkimiseks kasutatav konto. 脛rge eemaldage aga "
+"paroolikaitset oma erakontolt ega administraatori kontolt.\n"
+"\n"
+"Seadistage Windowsi server nii, et printer oleks kasutatav LPD protokolliga. "
+"Seej盲rel seadistage tr眉kkimine Teie masinas Printerdrakes 眉hendusviisiga \"%s"
+"\".\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/_Printerite automaattuvastus"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tuhat v盲rvi (16 bitti)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Eelistused"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- salvesta k玫vakettale asukohta: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "protsessori tootja nimi"
+msgid "Size: %d KB\n"
+msgstr "Suurus: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "seadme tootja nimi"
+msgid "Remove fonts on your system"
+msgstr "Fontide eemaldamine Teie s眉steemist"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Siinit眉眉p, millega hiir on 眉hendatud"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Hoiatus: v玫rgukaart (%s) on juba seadistatud.\n"
+"\n"
+"Kas soovite ette v玫tta automaatse 眉mberseadistamine?\n"
+"\n"
+"Seda saab teha ka k盲sitsi, aga siis peate kindlasti teadma, mida teete."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Protsessori alamt眉眉p (nn stepping'u number) "
+msgid "Graphical interface at startup"
+msgstr "X k盲ivitub koos s眉steemiga"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Mudeli alamt眉眉p"
+msgid "Please enter the directory to save:"
+msgstr "Sisestage palun kataloog, kuhu salvestada:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Flopi vorming, mida seade tunnustab"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "protsessori number"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ei ole piisavalt partitsioone RAID-%d jaoks\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Protsessori ID"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Seadistatud on j盲rgmised printerid. Topeltkl玫ps printeril v玫imaldab muuta "
+"selle seadistusi, teha see vaikeprinteriks v玫i vaadata selle infot."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "v玫rguprinteri port"
+msgid "Connected"
+msgstr "脺hendatud"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "protsessori (CPU) nimi"
+msgid "USB printer \\#%s"
+msgstr "USB printer \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "Nimi"
+msgid "Macedonian"
+msgstr "Makedoonia"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "hiire nuppude arv"
+msgid "Bridges and system controllers"
+msgstr "Sillad ja kontrollerid"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "Nuppude arv"
+msgid "/File/_Save"
+msgstr "/Fail/_Salvesta"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "CPU ametlik tootja"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "Mudeli nimi"
+msgid "No details"
+msgstr "脺ksikasjadeta"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "CPU p玫lvkond (nt 8, kui on PentiumIII, ...)"
+msgid "very nice"
+msgstr "v盲ga kena"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Mudel"
+msgid "Preview"
+msgstr "Eelvaatlus"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "k玫vaketta mudel"
+msgid "Remote Control"
+msgstr "Kaugjuhtimine"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "riistvaralise seadme klass"
+msgid "Please select media for backup..."
+msgstr "Valige palun varundamiseks andmekandja..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "Andmekandja klass"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 server: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "CPU alamp玫lvkond"
+msgid "Allow Thin Clients"
+msgstr "Luba 玫hukesi kliente"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Tase"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Gruusia (\"vene\" asetus)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Flopi vorming, mida seade tunnustab"
+msgid "/_Options"
+msgstr "/_Eelistused"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Flopi vorming"
+msgid "Your printer model"
+msgstr "Teie printeri mudel"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"M玫ned varasemad i486DX-100 kiibid ei suutnud korralikult naasta t枚枚resiimi, "
-"kui oli kasutatud k盲sklust \"seiska\" (\"halt\")"
+"\n"
+"\n"
+"(HOIATUS! Te kasutate juurpartitsioonil XFS-i, mist玫ttu\n"
+"alglaadimisketta loomine 1,44MB-sele flopile t玫en盲oliselt\n"
+"ei 玫nnestu, sest XFS vajab v盲ga suurt draiverit)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Seiskamisviga"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- kustuta p盲rast varundamist k玫vakettalt tar-failid.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Varased pentiumid olid vigased ning hangusid F00F baidikoodi dekodeerimisel"
+"CD- ega DVD-laadefaili ei leitud, palun kopeerige paigaldusprogramm ja rpm-"
+"failid."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "F00f bug"
-msgstr "F00f viga"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake paljude v玫imalustega seadistusvahend"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "jah t盲hendab, et matemaatika-kaasprotsessoril on erandivektor"
+msgid "Save"
+msgstr "Salvesta"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Kas FPU-l on irq vektor"
+msgid "The %s is unsupported"
+msgstr "Sel %s sk盲nneril puudub tugi"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "jah t盲hendab, et protsessoril on matemaatika-kaasprotsessor"
+msgid "Load the drivers for your usb devices."
+msgstr "Laeb draiverid USB-seadmete tarbeks."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Kas FPU on olemas"
+msgid "Disk"
+msgstr "Ketas"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter a printer device URI"
+msgstr "Printeri seadme URI"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Varastel Inteli Pentium-kiipidel oli viga ujukomaprotsessoris, mis ei "
-"saavutanud vajalikku t盲psust ujukomajagamist (FDIV) sooritades"
+"MandrakeSofti edu tugineb vaba tarkvara p玫him玫tte j盲rgimisele. Teie uus "
+"operatsioonis眉steem on 眉leilmse Linuxi kogukonna 眉hise t枚枚 tulemus."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "FDIV viga"
+msgid "Israel"
+msgstr "Iisrael"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU lipud kerneli teatel"
+msgid "French Guiana"
+msgstr "Prantsuse Guajaana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Lipud"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "GNU/Linuxi kerneli moodul, mis k盲sitleb seda seadet"
+msgid "add a rule"
+msgstr "lisa reegel"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "Moodul"
+msgid "A command line must be entered!"
+msgstr "Sisestama peab k盲surea!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "uus d眉naamiline seadmenimi, mille genereerib kerneli devfs"
+msgid "Select user manually"
+msgstr "Kasutaja valik k盲sitsi"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Uus devfs seade"
+msgid "Transfer printer configuration"
+msgstr "Printeri s盲tete 眉lekandmine"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "vana staatiline seadmenimi, mis oli kasutusel paketis dev"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Kas soovite tr眉kkimist lubada 眉lalmainitud printeritel?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Vana seadmefail"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"Et see t枚枚taks W2K primaarse domeenikontrolleri (PDC) puhul, on Teil vaja "
+"administraatori privileege, et k盲ivitada serveril k盲sk \"C:\\>net "
+"localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\" ja teha "
+"sellele alglaadimine.\n"
+"Samuti on Teil vaja domeeni administraatori kasutajanime/parooli, et "
+"眉hendada see masin Windows(TM) domeeniga.\n"
+"Kui v玫rgu眉hendus ei ole veel seadistatud, 眉ritab DrakX domeeni 眉henduda "
+"p盲rast v玫rgu seadistamist.\n"
+"Kui midagi peaks eba玫nnestuma ja domeeni autentimine ei t枚枚ta, k盲ivitage "
+"p盲rast alglaadimist k盲surealt 'smbpasswd -j DOMEEN -U KASUTAJA%%PAROOL', kus "
+"DOMEEN on Teie Windows(TM) domeen ja KASUTAJA%%PAROOL on domeeni "
+"administraator parooliga.\n"
+"K盲sk 'wbinfo -t' v玫imaldab kontrollida, kas domeeni autentimisfraasid on "
+"玫iged."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "See v盲li kirjeldab seadet"
+msgid "%s (Port %s)"
+msgstr "%s (port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "V玫rgu眉henduse kasutamine varundamiseks"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"CPU sagedus megahertsides (seda v玫ib ligil盲hedaselt samastada operatsioonide "
-"arvuga, mida CPU suudab sekundis sooritada)"
+"Argumendid: (arg)\n"
+"\n"
+" sulogin(8) lubamine/keelamine 眉ksikkasutaja tasemel."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Sagedus (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"N眉眉d on aeg m盲盲rata rakendused, mida soovite oma s眉steemi paigaldada.\n"
+"Mandrake Linux pakub tuhandeid pakette ja m玫istagi ei eelda keegi, et Te\n"
+"neid k玫iki juba ette tunneksite.\n"
+"\n"
+"Paketid on r眉hmitatud gruppidesse vastavalt nende kasutusalale. Grupid ise "
+"on\n"
+"jagatud nelja sektsiooni:\n"
+"\n"
+" * \"%s\": kui kavatsete kasutada arvutit t枚枚jaamana, valige siit "
+"sektsioonist\n"
+"眉ks v玫i enam gruppidest;\n"
+"\n"
+" * \"%s\": kui kavatsete kasutada arvutit programmeerimiseks, valige\n"
+"soovitud grupid siit;\n"
+"\n"
+" * \"%s\": kui arvuti peab t盲itma serveri 眉lesandeid, saate siit valida,\n"
+"milliseid k玫ige enam levinud teenuseid oma masinale paigaldada;\n"
+"\n"
+" * \"%s\": l玫ppeks saate siit valida meelep盲rase graafilise\n"
+"t枚枚keskkonna. Neist tuleb valida v盲hemalt 眉ks, kui soovite kasutada "
+"graafilist t枚枚jaama!\n"
+"\n"
+"Hiire liigutamine grupi nimele toob n盲htavale selle l眉hikirjelduse. Kui "
+"olete\n"
+"tavap盲rast paigaldust tehes k玫ik grupid valimata j盲tnud (seega talitanud\n"
+"vastupidi uuenduse m玫ttele), ilmub dialoog, mis pakub mitmesuguseid\n"
+"v玫imalusi minimaalseks paigalduseks.\n"
+"\n"
+" * \"%s\": paigaldatakse minimaalselt graafiliseks t枚枚lauaks vajalikud "
+"paketid;\n"
+"\n"
+" * \"%s\": paigaldatakse baass眉steem ning p玫hilised\n"
+"utiliidid ja nende dokumentatsioon. See peaks sobima n盲iteks serverile;\n"
+"\n"
+" * \"%s\": paigaldatakse minimaalne hulk pakette,\n"
+"mida on vaja Linuxi t枚枚tamiseks (vaid k盲surealt). See v玫tab ruumi umbes\n"
+"65 MB.\n"
+"\n"
+"脛ra m盲rkida saab kasti \"%s\", mis on kasuks, kui\n"
+"tunnete pakette, mida Teile pakutakse, v玫i kui soovite totaalset kontrolli\n"
+"selle 眉le, mida Teie masinasse paigaldatakse.\n"
+"\n"
+"Kui k盲ivitasite paigalduse resiimis \"%s\", v玫ite j盲tta k玫ik grupid\n"
+"valimata, mis takistab uute pakettide paigaldamist. Seda tasub tarvitada\n"
+"n盲iteks olemasoleva s眉steemi parandamisel v玫i v盲rskendamisel."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Infotase, mida v玫ib saada cpuid instruktsiooni vahendusel"
+msgid "Accept user"
+msgstr "Kasutaja 玫ige"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid tase"
+msgid "Server"
+msgstr "Server"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "CPU perekond (nt 6, kui on i686)"
+msgid "Bad choice, try again\n"
+msgstr "Halb valik, proovige palun uuesti\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid perekond"
+msgid "Heard and McDonald Islands"
+msgstr "Heard ja McDonald"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Kas sel CPU-l on Cyrix 6x86 \"koomaviga\" ?"
+msgid "No alternative driver"
+msgstr "Alternatiivne juhtprogramm puudub"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "\"Koomaviga\""
+msgid "Toggle to expert mode"
+msgstr "Tavakasutaja > Ekspert"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "ketta eriomadused (nt. kirjutamine ja/v玫i DVD tugi)"
+msgid "(on this machine)"
+msgstr "(sellel masinal)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Ketta eriomadused"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "L眉眉si aadress peab olema kujul 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "(Teise taseme) CPU puhvri suurus"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+"Leiti \"%s\" kiibil p玫hinev \"winmodem\". Kas paigaldada vajalik tarkvara?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Puhvri suurus"
+msgid "Looking at packages already installed..."
+msgstr "Tuvastan juba paigaldatud pakette..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-" -pci seadmed: n盲itab PCI pesa, seadet ja kaardi funktsiooni\n"
-"- eide seadmed: seade on kas 眉lem v玫i allutatu\n"
-"- scsi seadmed: scsi siin ja scsi seadme id-d"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "Asukoht siinil"
+msgid "Driver"
+msgstr "Juhtprogramm"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- PCI- ja USB-seadmed: tootja, seade, allettev玫tja ja allseadme PCI/USB id-d"
+"Linuxconf sooritab m玫nikord alglaadimise ajal mitmesuguseid\n"
+"asju s眉steemi seadistuse s盲ilitamiseks."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Siinitunnus"
+msgid "Printer on remote lpd server"
+msgstr "lpd printserver"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"GNU/Linuxi kernel peab alglaadimise ajal ajaarvesti l盲htestamiseks sooritama "
-"kalkulatsioonisilmuse. Selle tulemus salvestatakse bogomipsides, mis "
-"kujutab endast omamoodi CPU \"j玫udlustesti\"."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomipsid"
+"Enne fontide paigaldamist kontrollige, et Teil on 玫igus neid oma s眉steemis "
+"kasutada ja paigaldada.\n"
+"\n"
+" Fonte saab paigaldada normaalsel meetodil. Haruharva v玫ivad vigased fondid "
+"panna k眉ll X Serveri hanguma."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI kanal"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot on alglaadur NewWorld Macintosh riistvara jaoks. See suudab laadida "
+"nii\n"
+"GNU/Linuxi, MacOSi kui MacOSX, kui need on Teil olemas. Tavaliselt\n"
+"tuvastatakse ja paigaldatakse need operatsioonis眉steemid korrektselt.\n"
+"Kui see nii ei ole, saate praegu k盲sitsi kirjeid lisada. Kuid olge "
+"parameetrite\n"
+"valikul h盲sti hoolas ja ettevaatlik.\n"
+"\n"
+"Yabooti p玫hivalikud on j盲rgmised:\n"
+"\n"
+" * Initsialiseerimisteade: tavaline tekstis玫num, mida n盲idatakse enne\n"
+"alglaadimise k盲surea ilmumist.\n"
+"\n"
+" * Alglaadimisseade: n盲itab, kuhu soovite panna info, mida l盲heb vaja\n"
+"GNU/Linuxi algk盲ivituseks. 脺ldiselt tuleks selle info tarbeks juba varem "
+"luua\n"
+"alglaadimispartitsioon.\n"
+"\n"
+" * Open Firmware viivitus: Erinevalt LiLo-st on yabooti puhul v玫imalik kaks\n"
+"viivitust. Esimest m玫玫detakse sekundites ning selle ajal on Teil v玫imalik "
+"valida\n"
+"CD v玫i OF alglaadimise, MacOS-i v玫i Linuxi vahel.\n"
+"\n"
+" * Kernel alglaadimise viivitus: See on sarnane LiLo alglaadimise "
+"viivitusele.\n"
+"P盲rast Linuxi valimist tekib 0,1-sekundiline viivitus, enne kui\n"
+"valitakse kerneli vaikekirjeldus.\n"
+"\n"
+" * Lubada alglaadimine CD-lt?: Selle valimine v玫imaldab alglaadimise "
+"k盲sureale\n"
+"``C'' kirjutades valida CD.\n"
+"\n"
+" * Lubada OF alglaadimine?: Selle valimine v玫imaldab alglaadimise k盲sureale\n"
+"``N'' kirjutades valida Open Firmware.\n"
+"\n"
+" * OS vaikimisi: Siin v玫ite valida, milline operatsioonis眉steem laaditakse "
+"vaikimisi,\n"
+"kui Open Firmware viivitus l盲bi saab."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Kanal"
+msgid "No mouse"
+msgstr "Hiir puudub"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "see on f眉眉siline siin, millega seade on 眉hendatud (nt: PCI, USB, ...)"
+msgid "Germany"
+msgstr "Saksamaa"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Siin"
+msgid "Austria"
+msgstr "Austria"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "selle helikaardi alternatiivsete juhtprogrammide loend"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Helikaardi seadistamiseks k盲ivitage p盲rast paigaldust \"sndconfig\""
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Alternatiivsed juhtprogrammid"
+msgid "Collapse Tree"
+msgstr "Sulge puu"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"
+msgid "Auto Install Configurator"
+msgstr "Automaatpaigalduse seadistaja"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus."
+msgid "Configure networking"
+msgstr "V玫rgus盲tted"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ei saa kiiruuendust alustada !!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Kuhu soovite alglaaduri paigaldada?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Palun sisestage paigaldus-CD lugejasse ja vajutage <Olgu>.\n"
-"Kui teil s盲herdust ei ole, vajutage <Katkesta>, et kiiruuendust v盲ltida."
+"Esimene samm on meelep盲rase keele valik. Siin saate valida keele,\n"
+"mida kasutada paigaldamisel ja hilisemas t枚枚s. Valige esmalt maa,\n"
+"kus asute, ning seej盲rel meelep盲rane keel.\n"
+"\n"
+"Kl玫psates nupul \"%s\", v玫ite valida muid keeli, mida Teie t枚枚jaamale\n"
+"paigaldada. Teiste keelte valikul paigaldatakse vastava keele rakenduste\n"
+"ja dokumentatsiooni failid. Kui Teie masinal t枚枚tab n盲iteks kasutajaid\n"
+"Hispaaniast, valige puuvaates p玫hikeeleks eesti keel ning sektsioonis\n"
+"\"Muud\" m盲rkige 盲ra \"%s\".\n"
+"\n"
+"Paigaldada v玫ib ka mitu keelt. Te v玫ite neid valida mitu v玫i kas v玫i k玫ik,\n"
+"m盲rkides 盲ra kasti \"%s\". Keele toe valimine t盲hendab vastavaid\n"
+"t玫lkeid, fonte, 玫igekirja kontrollijaid jne. Lisaks v玫imaldab kasti\n"
+"\"%s\" m盲rkimine sundida s眉steemi kasutama\n"
+"Unicode'i (UTF-8). Arvestage siiski, et see on esialgu eksperimentaalne\n"
+"v玫imalus. Kui valite erinevaid kodeeringuid n玫udvaid keeli, paigaldatakse\n"
+"Unicode toetus nagunii.\n"
+"\n"
+"脺helt keelelt teisele l眉litumiseks v玫ite administraatorina anda k盲su\n"
+"\"/usr/sbin/localedrake\", mis v玫imaldab muuta kogu s眉steemi keelt,\n"
+"v玫i tavakasutajana muuta ainult enda kohta k盲ivat keeleseadistust."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Vahetage CD-ROM"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Mandrake Linuxi praegusel versioonil puudub %s tugi."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Muudatus on tehtud, aga selle rakendamiseks tuleb v盲lja logida"
+msgid "DHCP client"
+msgstr "DHCP klient"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Salvesta kui..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Taastamine failist %s eba玫nnestus: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Sisestage palun siia oma e-posti aadress"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech (jadaport, vana C7 t眉眉pi)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "hoiatuse s盲tted"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
+"Kas olete ikka kindel, et soovite seadistada tr眉kkimist sellel masinal?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Saate hoiatuse, kui koormus on siin m盲盲ratust suurem"
+msgid "New devfs device"
+msgstr "Uus devfs seade"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "koormuse s盲tted"
+msgid "ERROR: Cannot spawn %s."
+msgstr "VIGA: %s tekitamine eba玫nnestus."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Saate hoiatuse, kui 眉ks valitud teenustest enam ei t枚枚ta"
+msgid "Boot Style Configuration"
+msgstr "Alglaaduri stiil"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "service setting"
-msgstr "teenuse s盲tted"
+msgid "Automatic time synchronization"
+msgstr "Aja automaatne s眉nkroniseerimine"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd teenus"
+msgid "Backup files not found at %s."
+msgstr "%s ei sisaldanud varukoopiafaile."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin teenus"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "T盲name, et valisite Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH server"
+msgid "Armenian (phonetic)"
+msgstr "Armeenia (foneetiline)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba server"
+msgid "Card model:"
+msgstr "Kaardi mudel:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix meiliserver"
+msgid "Thin Client"
+msgstr "脮huke Klient"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ftp Server"
-msgstr "Ftp server"
+msgid "Start Server"
+msgstr "Serveri k盲ivitamine"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domeeninimede lahendaja"
+msgid "Turkmenistan"
+msgstr "T眉rkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache veebiserver"
+msgid "All remote machines"
+msgstr "K玫ik kaugmasinad"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Install themes"
+msgstr "Teemade paigaldamine"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Meili seadistamise vahend.\n"
-"\n"
-"Siin saab seadistada hoiatuss眉steemi.\n"
+" uuendused 2002 MandrakeSoft: Stew Benedict <sbenedict\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Meilihoiatuse s盲tted"
+msgid "Espanol"
+msgstr "Hispaania"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Meilihoiatus"
+msgid "Preparing installation"
+msgstr "Valmistun paigalduseks"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "palun oodake, anal眉眉sin faili: %s"
+msgid "Edit selected host/network"
+msgstr "Muuda valitud masinat/v玫rku"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Faili sisu"
+msgid "Add User -->"
+msgstr "Lisa kasutaja -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Kalender"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Faili valimine"
+msgid "True Type fonts installation"
+msgstr "TrueType fontide paigaldamine"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "aga ei sobi"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Kohtv玫rku 眉hendatud printerite automaattuvastus"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "sobib"
+msgid "LAN configuration"
+msgstr "LAN s盲tted"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "S盲tted"
+msgid "hard disk model"
+msgstr "k玫vaketta mudel"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Vahend logide j盲lgimiseks"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Te ei saa haakepunkti %s jaoks kasutada LVM loogilist ketast"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "otsing"
+msgid "Get Windows Fonts"
+msgstr "Windowsi fontide hankimine"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Mandrake vahendite seletused"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Iraani"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "S玫numid"
+msgid "Croatia"
+msgstr "Horvaatia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Kasutaja"
+msgid "Gateway:"
+msgstr "Vaikel眉眉s:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Abi/_Misv盲rk"
+msgid "Add server"
+msgstr "Serveri lisamine"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Eelistused/Test"
+msgid "Remote printer name"
+msgstr "V玫rguprinteri nimi"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Fail/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft on loonud erakordsed vahendid, mis aitavad 眉les seda k玫igi "
+"aegade k玫ige turvalisema Linuxi versiooni: s眉steemi turvahaldur Draksec ja "
+"v玫imas tulem眉眉r 眉heskoos kahandavad v盲ga m盲rgatavalt r眉nnakute ohtu."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fail/Salvesta _Kui"
+msgid "Device: "
+msgstr "Seade: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fail/_Salvesta"
+msgid "License agreement"
+msgstr "L玫ppkasutaja litsentsileping"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "S眉steemi parameetrid"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fail/_Ava"
+msgid "Please enter the directory where backups are stored"
+msgstr "Sisestage palun kataloog, kuhu varukoopiad on salvestatud"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Palun valige meelep盲rane turvatase"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fail/_Uus"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "See masin on juba nimekirjas ja seda ei ole v玫imalik uuesti lisada.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Ainult valitud p盲eval n盲itamine"
+msgid ", USB printer"
+msgstr ", USB printer"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Kas emuleerida keskmist hiirenuppu?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Valige rakendused, millel on fontide tugi:"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Palun valige hiire t眉眉p."
+msgid "Configure X"
+msgstr "X-i seadistamine"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "%s 眉henduse loomine"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "T眉rgi (traditsiooniline \"F\" mudel)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "%s 眉henduse katkestamine"
+msgid "Congratulations!"
+msgstr "脮nnitleme!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Hoiatus, avastati veel 眉ks Interneti眉hendus, mis v玫ib-olla kasutab Teie v玫rku"
+msgid "Use owner id for execution"
+msgstr "K盲ivitamiseks kasutatakse omaniku id-d"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "saadud"
+msgid "Down"
+msgstr "Alla"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "眉le kantud"
+msgid "Raw printer (No driver)"
+msgstr "Toorprinter (draiverita)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "saadud: "
+msgid "Install rpm"
+msgstr "Paigalda RPM"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "saadetud: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Faili tr眉kkimiseks k盲surealt (terminaliaknas) v玫ib kasutada kas k盲sku \"%s "
+"<fail>\" v玫i graafilist tr眉kkimisvahendit: \"xpp <fail>\" v玫i \"kprinter "
+"<fail>\". Graafilised vahendid v玫imaldavad h玫lpsamalt valida printerit ja "
+"muuta valikuid.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Kohalikud andmed"
+msgid "Time remaining "
+msgstr "Aega j盲盲nud "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "keskmine"
+msgid "UK keyboard"
+msgstr "Briti"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "V盲rvis盲tted"
+msgid "Unmount"
+msgstr "Lahuta"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"脺henduse loomine eba玫nnestus.\n"
-"Kontrollige palun s盲tteid Mandrake juhtimiskeskuse abil."
+msgid "Uninstall Fonts"
+msgstr "Fontide eemaldamine"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "脺hendus on loodud."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Interneti眉hendus on katkestatud."
+msgid "German (no dead keys)"
+msgstr "Saksa (ilma sammuta)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Interneti眉henduse katkestamine eba玫nnestus."
+msgid "Transferring %s..."
+msgstr "%s 眉lekandmine..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Interneti眉henduse loomine"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tuhat v盲rvi (15 bitti)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Interneti眉henduse katkestamine"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Eksportida saab NFS v玫i Samba abil. Palun valige, kumba kasutada."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Oodake palun, testime Teie 眉hendust..."
+msgid "Reboot"
+msgstr "Taask盲ivitus"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Logifailid"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "脺henduse kestvus: "
+msgid "Mandrake Control Center"
+msgstr "Mandrake juhtimiskeskus"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Saamise kiirus:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Sisestada v玫ib mitmesuguseid porte. \n"
+"Sobivad n盲iteks: 139/tcp 139/udp.\n"
+"Vaadake l盲hemalt /etc/services."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Saatmise kiirus:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Monitor\n"
+"\n"
+" Paigaldaja tuvastab ja seadistab tavaliselt automaatselt Teie masinaga\n"
+"眉hendatud monitori. Kui see ei peaks siiski 玫nnestuma, saate siin toodud\n"
+"nimekirjast valida monitori, mis Teil tegelikult on."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Statistika"
+msgid "\t-Tape \n"
+msgstr "\t-lint \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profiil "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Teie arvutis ei ole veel brauserit. Palun paigaldage see, kui soovite "
+"abiinfot vaadata"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "V玫rgu j盲lgimine"
+msgid "Remember this password"
+msgstr "J盲ta parool meelde"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Paigaldatud printerite andmete lugemine..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Interneti眉henduse jagamine n眉眉d t枚枚tab."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Masina nimi/IP aadress:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-v玫rk SSH vahendusel.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "See masin on juba nimekirjas ja seda ei ole v玫imalik uuesti lisada.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Kui soovitud printer tuvastati automaatselt, valige see loendist ning "
+"lisage siis vajadusel kasutajatunnus, parool ja/v玫i t枚枚grupp."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Kasuta vaba ruumi Windowsi partitsioonil"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Sisestage palun masinanimi v玫i IP aadress.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s leiti asukohas %s, kas seadistada see automaatselt?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"Valige palun masin, mille jaoks soovite siinseid sk盲nnereid v盲lja jagada:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Sk盲nnerite jagamine"
+"Argumendid: (arg)\n"
+"\n"
+"Salas玫na kasutamine kasutajate autentimiseks."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "See masin"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 juhtprogramm: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Eemalda valitud masin"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+"See masin/v玫rk on juba nimekirjas ja seda ei ole v玫imalik uuesti lisada.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Muuda valitud masinat"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackupi raport \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Lisa masin"
+msgid "Choose the packages you want to install"
+msgstr "Valige paketid, mida soovite paigaldada"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Nende masinate sk盲nnereid saab selle arvutiga kasutada:"
+msgid "Papua New Guinea"
+msgstr "Paapua Uus-Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "V玫rgusk盲nneri kasutamine"
+msgid "Serbian (cyrillic)"
+msgstr "Serbia (kirillitsa)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "K玫ik kaugmasinad"
+msgid "Make kernel message quiet by default"
+msgstr "Vaikimisi kerneli s玫numi keelamine"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Nende masinate jaoks on selle arvuti k眉ljes olevad sk盲nnerid k盲ttesaadavaks "
-"tehtud:"
+"Kas soovite m盲盲rata selle printeri (\"%s\")\n"
+"vaikeprinteriks?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Sk盲nnerite kasutamine masinatel:"
+msgid "The DHCP end range"
+msgstr "DHCP vahemiku l玫pp"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Sk盲nnerite kasutamine kaugmasinatel"
+msgid "Creating bootdisk..."
+msgstr "Alglaadimisketta loomine..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Sk盲nneri jagamine masinatele:"
+msgid "Wait please, testing your connection..."
+msgstr "Oodake palun, testime Teie 眉hendust..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Selle arvuti k眉lge 眉hendatud sk盲nnerid on teistele k盲ttesaadavad"
+msgid "Bringing down the network"
+msgstr "V玫rgu seiskamine"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Samuti saate otsustada, kas v玫rgusk盲nnerid peaksid olema automaatselt siin "
-"arvutis k盲ttesaadavad"
+msgid "Login ID"
+msgstr "Kasutajakonto"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Siin saate valida, millised selle arvuti k眉lge kinnitatud sk盲nnerid peaksid "
-"olema k盲ttesaadavad ka teistele kohtv玫rgu arvutitele ja millistele nende "
-"hulgast."
+"NFS on UNIXi keskkonna standardne failijaotusprotokoll.\n"
+"See programm t盲idab NFS failide lukustamise funktsioone.\n"
+"Vajalik serveerimisel."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Seadistatud sk盲nnerite nimekirja taasloomine..."
+msgid "DHCP Client"
+msgstr "DHCP klient"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Uute sk盲nnerite otsimine..."
+msgid "dismiss"
+msgstr "t眉histada"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Seadistatud sk盲nnerite otsimine..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Tr眉kkimine/skaneerimine seadmel \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Sk盲nneri jagamine"
+msgid "omit raid modules"
+msgstr "raid moodulite vahelej盲tt"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Sk盲nneri lisamine k盲sitsi"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Lpd on tr眉kideemon, ilma selleta ei ole v玫imalik tr眉kkida.\n"
+"P玫him玫tteliselt on see server, mis saadab t枚枚 printeri(te)le."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Uute sk盲nnerite otsimine..."
+msgid "Internet Connection Configuration"
+msgstr "Interneti眉henduse seadistamine"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Ei leitud 眉htegi sk盲nnerit, mida s眉steem saaks kasutada.\n"
+msgid "comma separated numbers"
+msgstr "komaga eraldatud numbrit"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Teie s眉steemiga on 眉hendatud\n"
-"\n"
-"%s\n"
-"sk盲nner.\n"
+"Kui valite seadme, n盲ete selle kohta infot v盲ljadel paremal asuvas paneelis "
+"(\"Info\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Valitud reegel 眉ks tase 眉lespoole"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
"Teie s眉steemiga on 眉hendatud\n"
"\n"
"%s\n"
-"sk盲nnerid.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Teie %s sk盲nner on seadistatud.\n"
-"N眉眉d v玫ite skaneerida dokumente, kasutades selleks rakendust \"XSane\", "
-"mille leiate rakenduste men眉眉s rubriigist Multimeedia/Graafika."
+"sk盲nner.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "valige seade"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Kas t玫esti eemaldada printer \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Valige palun seade, kuhu %s on 眉hendatud"
+msgid "I can't find any room for installing"
+msgstr "Paigalduseks ei ole 眉ldse ruumi"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Sk盲nnerite otsimine..."
+msgid "Default printer"
+msgstr "Vaikeprinter"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "K盲ttesaadavate portide automaattuvastus"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Olete seadistanud mitu v玫imalust Internetiga 眉hendumiseks.\n"
+"Valige palun see, mida soovite kasutada.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(M盲rkus: paralleelporte ei tuvastata)"
+msgid "Modify RAID"
+msgstr "Modifitseeri RAIDi"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"See %s sk盲nner tuleb seadistada printerdrake abil.\n"
-"Printerdrake saab k盲ivitada Mandrake juhtimiskeskuse riistvara sektsioonist."
+"Leiti k眉ll PCI ISDN kaart, kuid selle t眉眉p on tundmatu. Palun valige PCI "
+"kaart j盲rgmisel sammul."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "Sel %s sk盲nneril puudub tugi"
+msgid "Add user"
+msgstr "Lisa kasutaja"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s on Scannerdrake praegusele versioonile tundmatu."
+msgid "RAID-disks %s\n"
+msgstr "RAID-kettad %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Mandrake Linuxi praegusel versioonil puudub %s tugi."
+msgid "Liberia"
+msgstr "Libeeria"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Palun sisestage Interneti眉hendust teostava seadme nimi.\n"
+"\n"
+"N盲ited:\n"
+"\t\tppp+ modemi- v玫i DSL 眉henduse korral. \n"
+"\t\teth0 v玫i eth1 kaabli眉henduse korral, \n"
+"\t\tippp+ ISDN 眉henduse korral.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Klaviatuuri valik"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Tuvastati mudel: %s"
+msgid "Format partitions"
+msgstr "Vormindamine"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "CUPS-i automaatne seadistamine"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Valige sk盲nneri mudel"
+msgid "Running \"%s\" ..."
+msgstr "\"%s\" k盲ib..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s puudub sk盲nnerite andmebaasis, kas seadistada see k盲sitsi?"
+msgid "enable radio support"
+msgstr "raadiotoe lubamine"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s leiti asukohas %s, kas seadistada see automaatselt?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Toimub tuvastamine.."
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "M玫ned seadmed lisati:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "M玫ned seadmed riistvaraklassis \"%s\" eemaldati:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Sk盲nneri jagamine masinatele:"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"MandrakeSofti edu tugineb vaba tarkvara p玫him玫tte j盲rgimisele. Teie uus "
-"operatsioonis眉steem on 眉leilmse Linuxi kogukonna 眉hise t枚枚 tulemus."
+msgid "Loopback file name: %s"
+msgstr "Loopback faili nimi: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Tere tulemast avatud tarkvara maailma"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Valige palun printer, kuhu tuleks saata tr眉kit枚枚d."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "T盲name, et valisite Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "脛ra kanna printereid 眉le"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Oma teadmiste jagamiseks ning Linuxi vahendite loomiseks v玫ite 眉hineda "
-"diskussioonir眉hmadega, mida leiab meie \"kogukonna\" veebilehek眉lgedel"
+msgid "Delay before booting the default image"
+msgstr "Ooteaeg alglaadimisel"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Kas soovite avatud tarkvara kogukonnast rohkem teada saada? Liituge vaba "
-"tarkvara maailmaga!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Looge ise Linuxi parem tulevik!"
+"\n"
+" Copyright (C) 2001-2002: MandrakeSoft \n"
+"\tDUPONT Sebastien (esialgne versioon)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" K盲esolev rakendus on vaba tarkvara. Te v玫ite seda edasi levitada\n"
+" ja/v玫i muuta vastavalt GNU 脺ldise Avaliku Litsentsi tingimustele, nagu\n"
+" need on avaldanud Vaba Tarkvara Fond; kas Litsentsi versioon number 2\n"
+" v玫i (vastavalt Teie valikule) 眉ksk玫ik milline hilisem versioon.\n"
+"\n"
+" Seda rakendust levitatakse lootuses, et see on kasulik, kuid\n"
+" ILMA IGASUGUSE GARANTIITA; isegi KESKMISE/TAVALISE\n"
+" KVALITEEDI GARANTIITA v玫i SOBIVUSELE TEATUD KINDLAKS\n"
+" EESM脛RGIKS. 脺ksikasjade suhtes vaadake GNU 脺ldist Avalikku Litsentsi.\n"
+"\n"
+" Te peaks olema saanud GNU 脺ldise Avaliku Litsentsi koopia koos selle\n"
+" rakendusega; kui ei, siis v玫tke 眉hendust Vaba Tarkvara Fondiga aadressil:\n"
+" Free Software Foundation, 59 Temple Place - Suite 330, Boston,\n"
+" MA 02111-1307, USA.\n"
+"\n"
+" T盲name:\n"
+" - pfm2afm: \n"
+"\t autor: Ken Borgendale:\n"
+"\t teisendab Windowsi .pfm-faili .afm-failiks (Adobe fondimeetrika)\n"
+" - type1inst:\n"
+"\t autor: James Macnicol: \n"
+"\t type1inst tekitab failid fonts.dir fonts.scale ja Fontmap.\n"
+" - ttf2pt1: \n"
+"\t autorid: Andrew Weeks, Frank Siegert, Thomas Henlich, Sergei Babkin \n"
+" teisendab ttf-fondifailid afm- ja pfb-fontideks\n"
+"\n"
+"\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 v玫imaldab teil kasutada uusimat tarkvara helifailide "
-"m盲ngimiseks, piltide v玫i fotode t枚枚tlemiseks ning videode vaatamiseks"
+msgid "Please check for multisession CD"
+msgstr "M盲rkige palun mitmeseansilise CD korral"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Lehitsege veebi Mozilla v玫i Konqueroriga, lugege e-posti Evolutioni v玫i "
-"KMailiga, looge oma dokumendid OpenOffice.org abil."
+msgid "user"
+msgstr "kasutaja"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft on v盲lja valinud parima tarkvara just Teile"
+msgid "Use Hard Disk to backup"
+msgstr "Varundamine k玫vakettale"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 pakub Teile Mandrake juhtimiskeskust - v玫imsat vahendit "
-"oma arvuti kohandamiseks, et sellest viimane v盲lja v玫tta. Seadistada ja "
-"meelep盲raseks muuta saab turvataset, v盲lisseadmeid (monitor, hiir, "
-"klaviatuur...), Interneti眉hendust ja veel palju-palju muud!"
+msgid "Configure"
+msgstr "Seadista"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake paljude v玫imalustega seadistusvahend"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Arvuti saab kohandada just oma vajadustele t盲nu Mandrake Linuxi kasutajatele "
-"pakutavatele 11 igati seadistatavale kasutajaliidesele: KDE 3.1, GNOME 2.2, "
-"WindowMaker..."
+"Hoiatus, avastati veel 眉ks Interneti眉hendus, mis v玫ib-olla kasutab Teie v玫rku"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Kohandatav t枚枚keskkond"
+msgid "Backup Users"
+msgstr "kasutajate faile"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Programmeerimine erinevates keeltes, n盲iteks Perl, Python, C ja C++, pole "
-"kunagi varem olnud nii h玫lpus - seda t盲nu GNU gcc 3-le ja parimatele vaba "
-"tarkvara arenduskeskkondadele."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 kujutab endast t盲iuslikku arendusplatvormi"
+"Palun sisestage oma masina nimi.\n"
+"Masina nimi peab olema esitatud t盲iskujul,\n"
+"n盲iteks ``minumasin.minufirma.ee''.\n"
+"Kui Teil on vaikel眉眉s, siis sisestage ka selle IP aadress"
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Kujundage vaid m玫ne hiirekl玫psuga enda masinast v玫imas Linuxi server: "
-"veebiserver, meili-, tulem眉眉ri-, marsruutimis-, faili- ja printserver..."
+msgid "Select Printer Spooler"
+msgstr "Printeri spuuleri valik"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Muutke oma masin usaldust v盲盲rivaks serveriks"
+msgid "Create new theme"
+msgstr "Uue teema loomine"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"T盲isvaliku meie Linuxi lahendusi, samuti toodete eripakkumised ja muud "
-"\"soodustused\", leiate meie internetikaubamajast:"
+msgid "Mandrake Tools Explanation"
+msgstr "Mandrake vahendite seletused"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "MandrakeSofti ametlik kauplusladu"
+msgid "No image found"
+msgstr "Laadefaili ei leitud!"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Suurendage oma arvuti j玫udlust meie partnerite abiga, kes pakuvad Mandrake "
-"Linuxiga 眉hilduvaid professionaalseid rakendusi"
+"M玫ned t盲htsad paketid ei saanud korralikult paika.\n"
+"Teie CD-lugeja v玫i CD on ilmselt vigane.\n"
+"Paketifaile CD-l saate kontrollida k盲suga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
-"Hankige parimad kaubad ja teenused Mandrake Linuxi strateegilistelt "
-"partneritelt"
+msgid "Detected model: %s"
+msgstr "Tuvastati mudel: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft on loonud erakordsed vahendid, mis aitavad 眉les seda k玫igi "
-"aegade k玫ige turvalisema Linuxi versiooni: s眉steemi turvahaldur Draksec ja "
-"v玫imas tulem眉眉r 眉heskoos kahandavad v盲ga m盲rgatavalt r眉nnakute ohtu."
+"X11 kuvahaldur v玫imaldab Teil graafiliselt sisse logida\n"
+"s眉steemi, kus t枚枚tab X Window System, samuti toetab see korraga \n"
+"mitme X-seansi k盲ivitamist ja neis t枚枚tamist."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Turvalisus, nagu Teile meeldib"
+msgid "if set to yes, run the daily security checks."
+msgstr "kui on 'jah', sooritab igap盲evase turvakontrolli."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "See toode on saadaval MandrakeStore veebisaidil"
+msgid "Azerbaijan"
+msgstr "Aserbaid啪aan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Viige oma turvalisuse seadistamine t盲iuseni h玫lpsasti kasutatava tarkvara "
-"abil, mis 眉hendab 眉limalt t玫husaid komponente, n盲iteks tulem眉眉r, virtuaalse "
-"erav玫rgu (VPN) server ja klient, r眉nnakute avastamise s眉steem ja "
-"v玫rguliikluse haldur."
+msgid "No tape in %s!"
+msgstr "Seadmes %s puudub lint!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Tagage oma v玫rkude turvalisus MNF (Multi Network Firewall) abil"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
-"脺hinege MandrakeSofti tugimeeskondadega ning Linuxi kogukonnaga Internetis, "
-"et jagada oma kogemusi ning aidata ka teistel saada tunnustatud ekspertideks "
-"tehnilise toe veebilehek眉ljel:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "see on f眉眉siline siin, millega seade on 眉hendatud (nt: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "Leidke oma probleemidele lahendus MandrakeSofti internetitoe abil"
+msgid "How is the printer connected?"
+msgstr "Kuidas on see printer 眉hendatud?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Omandage Mandrake eksperdi kuulsus"
+msgid "Security level"
+msgstr "Turvatase"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Iga teadet j盲lgib ja lahendab konkreetne ja kvalifitseeritud MandrakeSofti "
-"tehniline t枚枚taja."
+msgid "final resolution"
+msgstr "l玫plik kuvatihedus"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Internetiplatvorm, mis vastab firmade spetsiifilistele tugivajadustele"
+msgid "Services"
+msgstr "Teenused"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Mandrake 盲riekspert"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19507,10 +19522,6 @@ msgstr ""
"gnumeric), PDF vaatajad jne"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "T枚枚jaam"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "M盲nguvahend"
@@ -19582,10 +19593,6 @@ msgstr ""
"K t枚枚laua keskkond: graafiline t枚枚keskkond ja rida seonduvaid rakendusi"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafiline keskkond"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome t枚枚jaam"
@@ -19604,10 +19611,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, WindowMaker, Enlightenment, Fvwm jt"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Arendus"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C ja C++ arendusteegid, rakendused ja include-failid"
@@ -19676,30 +19679,72 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS, SMB, SSH server, vahendaja (proxy)"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "Audiot枚枚jaam"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Valik rakendusi e-posti lugemiseks ja saatmiseks ning veebi lehitsemiseks"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "Heli esitamise ja redigeerimise rakendused"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Interneti眉henduse seadistamine"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Videot枚枚jaam"
+#~ msgid "Configure the connection"
+#~ msgstr "脺henduse seadistamine"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Video esitamise rakendused"
+#~ msgid "Disconnect"
+#~ msgstr "Katkesta 眉hendus"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Graafikat枚枚jaam"
+#~ msgid "Connect"
+#~ msgstr "脺henda"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Graafikarakendused"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Saate seadistada 眉henduse uuesti."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Valik rakendusi e-posti lugemiseks ja saatmiseks ning veebi lehitsemiseks"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Saate 眉henduda Internetti v玫i seadistada 眉hendus uuesti."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Hetkel ei ole Te Internetti 眉hendatud."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Saate 眉henduse katkestada v玫i uuesti seadistada."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Hetkel olete Internetti 眉hendatud."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "failide saatmine FTP kaudu"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Muutvarunduse kasutamine (vanu varukoopiaid ei asendata)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Taask盲ivita 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Loo initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Kirjuta %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Tee %s -st koopia %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Tee %s -st varukoopia %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf fontide teisendamine"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Fontide teisendamine"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
index a95ed9270..353f5aca6 100644
--- a/perl-install/share/po/eu.po
+++ b/perl-install/share/po/eu.po
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2002-10-13 17:11+0200\n"
"Last-Translator: I帽igo Salvador Azurmendi <xalba@euskalnet.net>\n"
"Language-Team: Euskara <linux-eu@chanae.alphanet.ch>\n"
@@ -15,967 +15,1748 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
+msgstr "Partizioak eskaneatzen muntatze-puntuak aurkitzeko"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-"Erabiltzaileen araberako konpartitzeak \"fileshare\". \n"
-"taldea erabiltzen du. Userdrake erabil dezakezu talde \n"
-"honetan erabiltzeak gehitzeko."
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cancel"
-msgstr "Utzi"
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr ", \"%s\" sareko inprimagailua, %s portua"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Abiarazi userdrake"
+msgid "Please insert floppy disk:"
+msgstr "Mesedez sartu disketea:"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Erabiltzaileei beraien direktorioetako batzuk elkarbanatzen utzi nahi "
-"zenieke?\n"
-"Baimena ematen baduzu konqueror eta nautilus-en \"Elkarbanatu\" gainean klik "
-"eginez egin ahalko dute.\n"
-"\n"
-"\"Pertsonalizatua\" erabiliz erabiltzaile bakoitzarentzako ezarpena zehaztu "
-"daiteke.\n"
+"Babeskopiako partizio-taulak ez du tamaina bera\n"
+"Jarraitu hala ere?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Derrigorrezko %s paketea falta da"
+msgid "Which username"
+msgstr "Zein Erabiltzaile-izena"
#: ../../any.pm:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "NFS edo Samba erabiliz esporta dezakezu. Zein nahi duzu"
+msgid "Which type of entry do you want to add?"
+msgstr "Zer sarrera-mota gehitu nahi duzu?"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
+msgid "Restore partition table"
+msgstr "Leheneratu partizio-taula"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Custom"
-msgstr "Pertsonalizatua"
+msgid "On CUPS server \"%s\""
+msgstr "\"%s\" CUPS zerbitzarian"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Allow all users"
-msgstr "Eman baimena erabiltzaile guztiei"
+msgid "Post-install configuration"
+msgstr "Instalazio-ondorengo konfigurazioa"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Ez konpartitu"
+msgid "Use ``%s'' instead"
+msgstr "Erabili ``%s'' horren ordez"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "More"
-msgstr "Gehiago"
+msgid "Type"
+msgstr "Mota"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
+msgstr ""
+"\n"
+"Halaber, fabrikatzaileek emandako PPD fitxategiekin edo jatorrizko CUPS "
+"kontrolatzaileekin konfiguratutako inprimagailuak ezin dira transferitu."
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Aukeratu sagu-mota."
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"\n"
+"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "Estatua:"
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr "Erdialdeko Afrikar Errepublika"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Atebide-gailua"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
+msgstr "Sareko Metodoa:"
+
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "Aukeratu hizkuntza"
+msgid "Ethernetcard"
+msgstr "Ethernet txartela"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "Parameters"
+msgstr "Parametroak"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Instalatu ondoren erabilgarri egongo diren beste hizkuntza batzuk aukera "
-"ditzakezu"
+msgid "Auto-detect"
+msgstr "Auto-detektatu"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Aukeratu erabiltzeko hizkuntza bat."
+msgid "Interface:"
+msgstr "Interfazea:"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Aukeratu exekutatu beharreko leiho-kudeatzailea:"
+msgid "Select installation class"
+msgstr "Hautatu instalazio-klasea"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Aukeratu erabiltzaile lehenetsia:"
+msgid "on CDROM"
+msgstr "CDROMean"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "aboot erabili nahi duzu?"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Badirudi sistema ez dagoela Internetera konektatuta.\n"
+"Saiatu konexioa birkonfiguratzen."
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Ordenagailua konfigura dezaket automatikoki erabiltzaile bat sartzeko.\n"
-"Eginbide hau erabili nahi duzu?"
+"Lotu zure inprimagailua Linux zerbitzari batera eta utzi zure Windows makina"
+"(k) berari lotzen bezero gisa.\n"
+"\n"
+"Ziur zaude inprimagailu hau ezartzen jarraitu nahi duzula egiten ari zaren "
+"moduan?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Automatikoki hasi saioa"
+msgid "Belarus"
+msgstr "Bielorrusia"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Icon"
-msgstr "Ikonoa"
+msgid "Error writing to file %s"
+msgstr "Errorea %s fitxategian idaztean"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd bateriaren egoera kontrolatzeko eta syslog-en jasotzeko erabiltzen\n"
+"da. Bateria gutxi dagoenean makina itzaltzeko ere erabil daiteke."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Password (again)"
-msgstr "Pasahitza (berriro)"
+msgid "Use tape to backup"
+msgstr "Erabili zinta babeskopia egiteko"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Password"
-msgstr "Pasahitza"
+msgid "The following packages are going to be installed"
+msgstr "Ondorengo pakete hauek instalatuko dira"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "User name"
-msgstr "Erabiltzaile-izena"
+msgid "CUPS configuration"
+msgstr "CUPSen konfigurazioa"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Real name"
-msgstr "Benetako izena"
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Onartu erabiltzailea"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ez dago partizio berriak esleitzeko adina leku"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Done"
-msgstr "Eginda"
+msgid "Moving"
+msgstr "Lekuz aldatzen"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-"Sartu erabiltzaile bat\n"
-"%s"
+"\n"
+"Drakbackup ekintzak %s bitartez:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add user"
-msgstr "Gehitu erabiltzailea"
+msgid "("
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Erabiltzaile-izen hau gehituta dago jadanik"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Ongi etorri Sarea konfiguratzeko morroira\n"
+"\n"
+"Zure Internet/sare-konexioa konfiguratzera goaz.\n"
+"Ez baduzu auto-detekzioa erabili nahi, desautatu kontrol-laukia.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "The user name is too long"
-msgstr "Erabiltzaile-izena luzeegia da"
+msgid ")"
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lebanon"
+msgstr "Libano"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Stop"
+msgstr "Gelditu"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s detektatua"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No CD device defined!"
+msgstr "Ez da CD gailurik definitu!"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgariarra (fonetikoa)"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP start ip"
+msgstr "DHCP-ren eremu hasiera"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Abioko kargatzailearen aukera nagusiak"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Erabiltzaile-izenak minuskulaz idatzitako letrak, zenbakiak, `-' eta `_' "
-"soilik izan ditzake"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Eman erabiltzaile-izen bat"
+msgid "Tape"
+msgstr "Zinta"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Pasahitz hau sinpleegia da"
+msgid "Scanning network..."
+msgstr "Sarean bilatzen..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Saiatu berriro"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Aukera honekin /etc direktorioaren edozein bertsio leheneratu\n"
+"ahal izango duzu."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Pasahitzak ez datoz bat"
+msgid "Malaysia"
+msgstr "Malaysia"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "(%s jadanik gehituta)"
+msgid "Swiss (French layout)"
+msgstr "Suitzarra (diseinu frantsesa)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "Konpilaketa tresnen atzipena"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid-ek huts egin du (beharbada raid-tresnak faltako dira?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "sareko tresnen atzipena"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to administrative files"
-msgstr "administrazio-fitxategien atzipena"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Soinu-txartela"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "onartu \"su\""
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
+"<fitxategia>\" komandoa.\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "rpm tresnen atzipena"
+msgid "Level %s\n"
+msgstr "%s maila\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "X programen atzipena"
+msgid "Luxembourg"
+msgstr "Luxenburgo"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Hauek dira sarrerak.\n"
-"Beste batzuk gehi ditzakezu edo lehendik daudenak aldatu."
+"\n"
+" DrakBackup Daemon-aren berri-ematea\n"
+"\n"
+"\n"
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Beste SE bat (windows...)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Irak"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Beste SE bat (MacOS...)"
+msgid "Bus"
+msgstr "Busa"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Beste SE bat (SunOS...)"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"LAN helbide-gatazka potentziala aurkitu da %s(r)en uneko konfigurazioan!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Zer sarrera-mota gehitu nahi duzu?"
+msgid "Configuring..."
+msgstr "Konfiguratzen..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Etiketa hau jadanik erabili da"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Konfigurazioa eginda dago, eta orain gaituta dago."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Erroko partizio bat zehaztu behar duzu"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"TB txartela moderno gehienentzako, GNU/Linux kernelaren bttv moduloak "
+"parametro egokiak auto-detektatzen ditu.\n"
+"Zure txartela ez bada egokiro detektatzen, sintonizatzaile eta txartela mota "
+"egokiak behartu ditzakezu hemen. Hautatu zure tb parametro egokiak "
+"beharrezkoa bada"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Nukleo-imajina bat zehaztu behar duzu"
+msgid "Password (again)"
+msgstr "Pasahitza (berriro)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Ez da etiketa hutsik onartzen"
+msgid "Search installed fonts"
+msgstr "Bilatu instalatutako letra-tipoak"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Lehenetsia"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "BideorikEz"
+msgid "IP address"
+msgstr "IP helbidea"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-tamaina"
+msgid "Choose the sizes"
+msgstr "Aukeratu tamainak"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "Erantsi"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Hondatutako datuen zerrenda:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Etiketa"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Ez-segurua"
+msgid "Choose another partition"
+msgstr "Aukeratu beste partizio bat"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Taula"
+msgid "Current user"
+msgstr "Uneko erabiltzailea"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Root"
+msgid "Username"
+msgstr "Erabiltzaile-izena"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Irakurri/idatzi"
+msgid "Left \"Windows\" key"
+msgstr "Ezkerreko \"Windows\" tekla"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "dhcpd Zerbitzari Konfigurazioa"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Bideo modua"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Direktorioentzako erabilia:\n"
+" direktorio edo fitxategiaren jabeak bakarrik direktorio honetan ezabatu "
+"dezake"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Imajina"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "SE lehenetsia?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "\"%s\" Novell zerbitzarian, \"%s\" inprimagailua"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Gaitu OF abiaraztea?"
+msgid "Remove a module"
+msgstr "Kendu modulua"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Gaitu CDtik abiaraztea?"
+msgid "Password"
+msgstr "Pasahitza"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Nukleoaren abioaren denbora-muga"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware-ren atzerapena"
+msgid "Advanced Configuration"
+msgstr "Konfigurazio aurreratua"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr ", funtzio anitzeko gailua"
#: ../../any.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Abioko gailua"
+msgid "Root"
+msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Hasierako mezua"
+msgid "Choose an existing RAID to add to"
+msgstr "Aukeratu lehendik dagoen RAID bat gehitzeko"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Erabili beharreko abioko kargatzailea"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turkiarra (modernoa \"Q\" eredua)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Abioko kargatzailearen aukera nagusiak"
+msgid "Lilo message not found"
+msgstr "Ez da lilo mezua aurkitzen"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"``Murriztu komando-lerroko aukerak'' aukera ezin da erabili pasahitzik gabe"
+"Nukleoaren goiburukoaren birsortze automatikoa /boot-en\n"
+"honentzat: /usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Eman ram-tamaina MBtan"
+msgid "if needed"
+msgstr "beharrezkoa bada"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Gaitu profil anitzak"
+msgid "Restore Failed..."
+msgstr "Leheneraketak Hutsegin du..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Auto-detektatuta"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Azalpena:\n"
+"\n"
+" Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
+" konfigurazioan zehar hauta ditzakezu: \n"
+"\t- Sistema-fitxategiak, \n"
+"\t- Erabiltzaile-fitxategiak, \n"
+"\t- Bestelako fitxategiak.\n"
+"\tedo Sistema osoa ... eta Bestelakoa (Windows partizioetan bezala)\n"
+"\n"
+" Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
+"\t- Disko gogorra.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM.\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Zinta.\n"
+"\n"
+" Drakbackup erabiliz, zure sistema hautatutako\n"
+" direktorio batean lehenera dezakezu.\n"
+"\n"
+" Lehenespen gisa, babeskopia guztiak \n"
+" /var/lib/drakbackup direktorioan gordeko dira\n"
+"\n"
+" Konfigurazio-fitxategia:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"\n"
+"Leheneratze-urratsa:\n"
+" \n"
+" Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
+" jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
+" daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
+" babeskopia egitea gomendatzen da.\n"
+"\n"
+"\n"
+
+#: ../../install_messages.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Zehaztu RAM tamaina beharrezkoa bada (%d MB aurkituak)"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Sarrera\n"
+"\n"
+"Mandrake Linux banaketako sistema eragileari eta erabilgarri dauden osagaiei "
+"\"Software-produktuak\"\n"
+"deituko zaie aurrerantzean. Software-produktuetan sartzen dira, besteak \n"
+"beste, Mandrake Linux banaketako sistema eragileari eta osagaiei dagozkien "
+"programak, \n"
+"metodoak, arauak eta dokumentazioa.\n"
+"\n"
+"\n"
+"1. Lizentzia-kontratua\n"
+"\n"
+"Irakurri arretaz dokumentu hau. Dokumentu hau zure eta MandrakeSoft S.A.ren "
+"arteko lizentzia-kontratu bat da,\n"
+"Software-produktuei dagokiena.\n"
+"Software-produktuak instalatu, bikoiztu edo era batean edo bestean erabiliz, "
+"esplizituki \n"
+"onartzen dituzu eta erabateko adostasuna adierazten diezu Lizentzia honen "
+"baldintzei. \n"
+"Lizentziaren zatiren batekin ados ez bazaude, ez duzu baimenik izango "
+"Software-produktuak instalatu, \n"
+"bikoiztu edo erabiltzeko. \n"
+"Software-produktuak Lizentzia honekin bat ez datorren moduan instalatu, "
+"bikoiztu edo erabiltzeko \n"
+"saio oro deuseza izango da eta Lizentziari dagozkion eskubideak amaitu "
+"egingo \n"
+"dira. Lizentzia amaitzean, Software-produktuen kopia guztiak berehala "
+"suntsitu \n"
+"behar dituzu.\n"
+"\n"
+"\n"
+"2. Berme mugatua\n"
+"\n"
+"Software-produktuak eta erantsitako dokumentuak \"dauden-daudenean\" ematen "
+"dira, bermerik gabe, \n"
+"legeak onartzen duen neurrian.\n"
+"MandrakeSoft S.A.k ez du, ezein kasutan eta legeak onartzen duen neurrian, "
+"erantzukizunik izango\n"
+"Software-produktuen erabileraren edo erabiltzeko ezgaitasunaren ondorioz "
+"sortutako kalte berezi, ustekabeko,\n"
+"zuzeneko edo zeharkakoengatik (lana galtzea, lana etetea, finantza-galera, "
+"epai baten ondorioz ordaindu \n"
+"beharreko kuotak eta zigorrak edo beste edozein ondoriozko galera barne, "
+"mugarik gabe), \n"
+"MandrakeSoft S.A. jakinaren gainean egon arren halako kalteak gerta "
+"litezkeela.\n"
+"\n"
+"HERRIALDE BATZUETAN SOFTWARE DEBEKATUA EDUKITZEARI EDO ERABILTZEARI LOTUTAKO "
+"ERANTZUKIZUN MUGATUA\n"
+"\n"
+"Legeak onartzen duen neurrian, MandrakeSoft S.A.k edo bere banatzaileek, ez "
+"dute, ezein kasutan,\n"
+"erantzukizunik izango herrialde batzuetan, bertako legeek debekatutako edo "
+"mugatutako software-osagaiak edo\n"
+"Mandrake Linux-en guneetatik deskargatutako software-osagaiak eduki eta "
+"erabiltzearen ondorioz \n"
+"sortutako kalte berezi,ustekabeko,zuzeneko edo zeharkakoengatik (lana "
+"galtzea, lana etetea,\n"
+"finantza-galera, epai baten ondorioz ordaindu beharreko kuotak eta zigorrak "
+"edo beste edozein ondoriozko \n"
+"galera barne, mugarik gabe).\n"
+"Erantzukizun mugatu hau Software-produktuetan sartzen diren kriptografia "
+"handiko osagaiei aplikatzen \n"
+"zaie, baina ez da horietara mugatzen.\n"
+"\n"
+"\n"
+"3. GPL Lizentzia eta Lizentzia erlazionatuak\n"
+"\n"
+"Software-produktuak hainbat pertsonak edo erakundek sortutako osagaiak dira. "
+"Osagai \n"
+"horietako gehienak aurrerantzean\"GPL\" deituko diogun GNU Lizentzia Publiko "
+"Orokorraren\n"
+"edo antzeko lizentzien baldintzen araberakoak dira. Lizentzia horietako "
+"gehienek, \n"
+"beren osagaiak bikoizteko, egokitzeko edo birbanatzeko aukera ematen dute. "
+"Osagai bat erabili aurretik, irakurri \n"
+"arretaz osagai horren lizentzia-kontratuko baldintzak. Osagaiaren "
+"lizentziari\n"
+"buruzko galdera oro osagaiaren egileari egin beharko zaio, eta ez "
+"MandrakeSoft-i.\n"
+"MandrakeSoft S.A.k garatutako programak GPL Lizentziaren araberakoak dira. "
+"MandrakeSoft S.A.k\n"
+"idatzitako dokumentazioa lizentzia zehatz baten araberakoa da. Xehetasun "
+"gehiago nahi izanez gero, \n"
+"jo dokumentaziora.\n"
+"\n"
+"\n"
+"4. Jabetza intelektualaren eskubideak\n"
+"\n"
+"Software-produktuen osagaiei dagozkien eskubide guztiak haien \n"
+"egileenak dira eta software-programei\n"
+"aplikatzen zaizkien jabetza intelektualaren eta copyriht-aren legeek "
+"babesten dituzte.\n"
+"MandrakeSoft S.A.k eskubidea du Software-produktuak bere osotasunean edo "
+"zatika aldatzeko, \n"
+"bide guztiak erabiliz eta helburu guztietarako.\n"
+"\"Mandrake\", \"Mandrake Linux\" eta asoziatutako logotipoak MandrakeSoft S."
+"A.ren marka erregistratuak dira \n"
+"\n"
+"\n"
+"5. Lege arautzaileak \n"
+"\n"
+"Kontratu honen edozein zati epai batek deuseztzat, legez kanpokotzat edo "
+"aplikaezintzat jotzen badu, \n"
+"zati hori kendu egingo da kontratutik. Kontratuaren gainerako atal "
+"aplikagarriek ezarritakoa \n"
+"bete behar duzu.\n"
+"Lizentzia honetako baldintzak Frantziako legeen araberakoak dira.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Garbitu /tmp abiatzen den bakoitzean"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"aurrerapen-barraren goi eta\n"
+"ezker ertzaren x koordenatua"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Erakutsi uneko interfaze-konfigurazioa"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Sortu abioko disko bat"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "restrict"
-msgstr "murriztu"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"ISA txartela baduzu, hurrengo pantailako balioek zuzenak izan behar dute.\n"
+"\n"
+"PCMCIA txartela baduzu, txartelaren irq eta io jakin behar dituzu.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Murriztu komando-lerroko aukerak"
+msgid "Do not print any test page"
+msgstr "Ez inprimatu proba-orririk"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Pasahitz hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Gaitu CDtik abiaraztea?"
+msgid "[keyboard]"
+msgstr "Teklatua"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Imajina lehenetsia abiarazi arteko atzerapena"
+msgid "FTP proxy"
+msgstr "FTP proxy-a"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "compact"
-msgstr "trinkotu"
+msgid "Install List"
+msgstr "Instalatu zerrenda"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Compact"
-msgstr "Trinkoa"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Aldatu\n"
+"Leheneratze Bidea"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Abioko kargatzailearen instalazioa"
+msgid "Show only for the selected day"
+msgstr "Erakutsi bakarrik hautatutako egunerako"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Arrankeko partizioaren lehen sektorea"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Unitateko lehen sektorea (MBR)"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Non instalatu nahi duzu abioko kargatzailea?"
+msgid "Logs"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalazioa"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "SILO instalazioa"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Skip"
-msgstr "Saltatu"
+msgid "What kind of card do you have?"
+msgstr "Nolako txartela duzu?"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Abiapen Disketea"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "Segurtasuna"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"\"xpdq\" interfaze grafikoa ere erabil dezakezu aukerak ezartzeko eta "
+"inprimatze-lanak maneiatzeko.\n"
+"KDE erabiltzen baduzu mahaigaineko ingurune gisa, \"estualdi-botoi\" bat "
+"egongo da, \"GELDITU inprimagailua!\" dioena, eta inprimatze-lan guztiak "
+"berehala etengo ditu bertan klik egitean. Papera trabatzen denean eta "
+"horrelakoetan erabili ohi da.\n"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Arrankeko partizioaren lehen sektorea"
+msgid "Unknown"
+msgstr "Modelo ezezaguna"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Sare-konfigurazioa"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Partizio batean abioko kargatzailea instalatzea erabaki duzu.\n"
-"Horrek esan nahi du baduzula abioko kargatzaile bat abioko unitatean (adib.: "
-"System Commander).\n"
-"\n"
-"Zein da zure abioko unitatea?"
+"Munduko gainerako protokoloa \n"
+" D kanalik ez (linea alokatuak)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Abioko disketea sortzen"
+msgid "Option %s must be a number!"
+msgstr "%s aukerak zenbakia izan behar du!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sartu diskete bat %s unitatean"
+msgid "Notice"
+msgstr "Oharra"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Aukeratu abioko diskoa egiteko erabili nahi duzun diskete-unitatea"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Bigarren diskete-unitatea"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Lehen diskete-unitatea"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Inprimagailu hau detektatu da automatikoki. Inprimagailuaren konfigurazioa "
+"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
+"baduzu konfigurazio pertsonalizatua, aldatu \"Eskuzko konfigurazioa"
+"\"aukerara."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
+msgid "What type of partitioning?"
+msgstr "Nolako partizioa?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman LILO "
-"(edo grub)\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek LILO kentzen badu, "
-"edo LILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"Zure sistemarako abioko disko bat sortu nahi duzu?\n"
-"%s"
+"FTP bitartez bidalitako fitxategi-zerrenda: %s\n"
+" "
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
+msgid "Interface"
+msgstr "Interfazea"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"aukeren azalpena:\n"
+"\n"
+" - Sistema-fitxategien babeskopia:\n"
+" \n"
+"\tAukera honen bidez konfigurazio-fitxategi guztiak dituen\n"
+"\t/etc direktorioaren babeskopia egin daiteke. Kontuz ibili\n"
+"\tleheneratze-urratsean, eta ez gainidatzi hauek:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Erabiltzaile-fitxategien babeskopia: \n"
+"\n"
+"\tAukera honen bidez, babeskopia egiteko erabiltzaileak\n"
+"\thauta ditzakezu.\n"
+"\tDisko-lekua gordetzeko, web arakatzailearen cachea ez \n"
+"\tsartzea komeni da.\n"
+"\n"
+" - Bestelako fitxategien babeskopia: \n"
+"\n"
+"\tAukera honen bidez, gordetzeko datu gehiago gehituko dituzu.\n"
+"\tBeste babeskopiekin ezin da oraindik babeskopia inkrementala hautatu.\t\t\n"
+" \n"
+" - Babeskopia inkrementalak:\n"
+"\n"
+"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
+"\tbidez, lehen aldian datu guztien babeskopia egin\n"
+"\tdaiteke, eta gero aldatuenak bakarrik.\n"
+"\tGero, leheneratze-urratsean, data jakin bateko\n"
+"\tdatuak leheneratu ahal izango dituzu.\n"
+"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
+"\tezabatzen dira babeskopia bakoitza egin aurretik. \n"
"\n"
"\n"
-"(KONTUZ! XFS erabiltzen ari zara erroko partizioan,\n"
-"abioko diskoa 1,44 Mb-ko disketean sortzeak huts egingo du\n"
-"seguru asko, XFSk oso kontrolatzaile handia behar duelako)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman SILO\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek SILO kentzen badu, "
-"edo SILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"\n"
-"Zure sistemarako abioko disko bat sortu nahi baduzu, sartu diskete bat "
-"lehen\n"
-"unitatean eta sakatu \"Ados\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Abioko kargatzailea ezin da %s partizio batean instalatu\n"
+msgid "comma separated strings"
+msgstr "komaz banaturiko karaktere-hilarak"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "ez dago nahiko leku /boot-en"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Nabarmendutako sarrera automatikoki abiaraziko da %d segundotan."
+msgid "Messages"
+msgstr "Mezuak"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandoak editatzeko, edo 'c' komando-lerroa nahi baduzu."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Ezezaguna|CPH06X (bt878) [saltzaile ugari]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sakatu sartu hautatutako SE abiarazteko, 'e' abiarazi aurreko"
+msgid "POP and IMAP Server"
+msgstr "POP eta IMAP Zerbitzaria"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Erabili %c eta %c teklak zein sarrera nabarmenduko den hautatzeko."
+msgid "Mexico"
+msgstr "Mexiko"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ongi etorri GRUB sistema eragilearen aukeratzailera!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "kargatzeko ezarpenak"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Ba duzu %s interfazerik?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO testu-menuarekin"
+msgid "Switzerland"
+msgstr "Suitza"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO menu grafikoarekin"
+msgid "Brunei Darussalam"
+msgstr "Brunei Darussalam"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Urruneko lpd inprimagailuaren aukerak"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Ongi etorri %s sistema eragilearen aukeratzailera!\n"
+"GNU/Linux erabiltzaile anitzeko sistema da, eta horrek esan nahi du\n"
+"erabiltzaile bakoitzak bere hobespenak eta bere fitxategiak eduki\n"
+"ditzakeela. Gehiago jakiteko, irakurri ``Erabiltzailearen gida''. Baina\n"
+"administratzailea den \"root\"-ak ez bezala, hemen gehitutako\n"
+"erabiltzaileek debekatuta izango dute ezer aldatzea euren fitxategiak eta\n"
+"konfigurazioa izan ezik. Zuretzat erabiltzaile arrunt bat behintzat sortu\n"
+"beharko duzu. Eta kontu hori erabili beharko zenuke eguneroko lanak\n"
+"egiteko. Egunero \"root\" gisa saioa hastea oso erosoa den arren, oso\n"
+"arriskutsua ere izan daiteke! Hutsegiterik txikienak sistema funtzionatu\n"
+"ezinda utz dezake. Erabiltzaile arrunt gisa hutsegite larri bat egiten\n"
+"baduzu, informazioren bat gal dezakezu, baina ez sistema osoa.\n"
"\n"
-"Aukeratu sistema eragile bat goiko zerrendan edo\n"
-"itxaron %d segundo lehenetsitako abiorako.\n"
+"Lehendabizi, zure benetako izena idatzi behar duzu. Hori ez da\n"
+"derrigorrezkoa noski - berez, nahi duzun izena eman baitezakezu. DrakXk\n"
+"gero zuk koadroan idatzitako lehen hitza hartuko du eta hori izango da\n"
+"\"Erabiltzaile-izena\". Hori izango da erabiltzaile jakin horrek sisteman\n"
+"saioa hasteko erabiliko duen izena. Alda dezakezu. Gero pasahitz bat sartu\n"
+"behar duzu hemen. Pribilegio gabeko erabiltzailearen (erabiltzaile\n"
+"arruntaren) pasahitza ez da \"root\"-arena bezain funtsezkoa segurtasunaren\n"
+"aldetik, baina ez da horregatik arduragabekeriaz jokatu behar: izan ere,\n"
+"zure fitxategiak baitaude arriskuan.\n"
"\n"
+"\"Onartu erabiltzailea\"n klik eginez gero, nahi adina erabiltzaile gehi\n"
+"ditzakezu. Gehitu erabiltzaile bat zure lagun bakoitzeko: zure ama edo\n"
+"anaia, esate baterako. Nahi dituzun erabiltzaile guztiak gehitu ondoren,\n"
+"hautatu \"Eginda\".\n"
+"\n"
+"\"Aurreratua\" botoian klik egitean, erabiltzaile horrentzat lehenetsitako\n"
+"\"shell\"-a aldatu ahal izango duzu (bash da lehenetsia)."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper falta da"
+msgid "Configure Internet Access..."
+msgstr "Konfiguratu Interneterako sarbidea..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu falta da"
+msgid "Norway"
+msgstr "Norvegia"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"%s(e)n instalazioa egindakoan pantaila-argazkiak erabilgarri egongo dira"
+msgid "Danish"
+msgstr "Daniarra"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ezin da pantaila-argazkirik egin partizioak egin aurretik"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Abioan automatikoki aktibatu BlokZenb tekla (zenbakiak\n"
+"blokeatzekoa) kontsolan eta XFree-n."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d segundo"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Sartu makina honen IP konfigurazioa.\n"
+"Elementu bakoitza IP helbide gisa sartu behar da puntuz\n"
+"bereizitako zenbakizko notazioan (adibidez, 1.2.3.4)."
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "minutu bat"
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linux instalazioa hainbat CD-ROMetan banatuta dago. DrakXk badaki\n"
+"hautatako pakete bat beste CD-ROM batean kokatuta dagoen edo ez, eta uneko\n"
+"CDa atera eta beste bat sartzeko eskatuko dizu behar izan ahala."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutu"
+msgid "Processors"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "Bulgaria"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Ez da nic batere hautatu!"
+
+#: ../../lang.pm:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard eta Jan Mayen uharteak"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Arazoak izan dira konfigurazioan zehar.\n"
+"Probatu konexioa net_monitor edo mcc bidez. Konexioak funtzionatzen ez badu, "
+"konfigurazioa berrabiarazi beharko duzu"
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "partition %s is now known as %s"
+msgstr "%s partizioa %s da orain"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "United States"
-msgstr "Estatu Batuak"
+msgid "Backup Other files..."
+msgstr "Beste fitxategi batzuen babeskopia... "
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Austria"
-msgstr "Austria"
+msgid "SMB server IP"
+msgstr "SMB zerbitzariaren IP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italia"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Herbehereak"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "%s unitatearen partizio-taula diskoan idatziko da!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "Paketeak instalatzen..."
+
+#: ../../any.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Suedia"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
+"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman LILO "
+"(edo grub)\n"
+"instalatu nahi ez baduzu, edo beste sistema eragile batek LILO kentzen badu, "
+"edo LILOk\n"
+"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
+"pertsonalizatua Mandrake\n"
+"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
+"larriak\n"
+"errazago gainditu ahal izateko.\n"
+"Zure sistemarako abioko disko bat sortu nahi duzu?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ", USB printer \\#%s"
+msgstr ", \\/*%s USB inprimagailua"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norvegia"
+msgid "Latvian"
+msgstr "Letoniarra"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Greece"
-msgstr "Grezia"
+msgid "monthly"
+msgstr "hilero"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Germany"
-msgstr "Alemania"
+msgid "Module name"
+msgstr "Modulu-izena"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "Txekiar errepublika"
+msgid "Start at boot"
+msgstr "Abioan abiaraztekoa"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Erabili babeskopia inkrementalak (ez ordeztu kopia zaharrak)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Belgium"
-msgstr "Belgika"
+msgid "First sector of drive (MBR)"
+msgstr "Unitateko lehen sektorea (MBR)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "France"
-msgstr "Frantzia"
+msgid "Joystick"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errorea %s idazteko irekitzean: %s"
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nothing to do"
-msgstr "Ez dago zer eginik"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "gailu hori gobernatzen duen GNU/Linux kernelaren modulua"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ez dago nahikoa leku libre auto-esleitzeko"
+msgid "Trying to rescue partition table"
+msgstr "Partizio-taula berreskuratzen saiatzen"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ezin da fitxategi-sistema enkriptatua erabili %s muntatze-punturako"
+msgid "Option %s must be an integer number!"
+msgstr "%s aukerak osoko zenbakia izan behar du!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Egiazko fitxategi-sistema (ext2/ext3, reiserfs, xfs, or jfs) behar duzu "
-"muntatze-puntu honentzako\n"
+"Zuk bete beharreko sarrerak:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktorio honek erroko fitxategi-sisteman egon behar du"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Ezin da bertsio-berritzea abiarazi!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ezin da LVM bolumen logikoa erabili %s muntatze-punturako"
+msgid "Name: "
+msgstr "Izena: "
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Softwareko RAID partizio bat hautatu duzu erro gisa (/).\n"
-"Ez dago abioko kargatzailerik hori /boot partiziorik gabe erabil "
-"dezakeenik.\n"
-"Beraz, kontuan izan /boot partizioa gehitu behar duzula"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milioi kolore (24 bit)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jadanik badago %s muntatze-puntua duen partizio bat\n"
+msgid "Allow all users"
+msgstr "Eman baimena erabiltzaile guztiei"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "MandrakeSoft denda ofiziala"
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Muntatzen-puntuek / batez hasi behar dute"
+msgid "Resizing"
+msgstr "Tamaina aldatzen"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ezin da ReiserFS erabili 32MB baino gutxiagoko partizioetarako"
+msgid "Cable connection"
+msgstr "Kable-konexioa"
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ezin da JFS erabili 16MB baino gutxiagoko partizioetarako"
+msgid "User"
+msgstr "Erabiltzailea"
#: ../../fsedit.pm:1
#, c-format
@@ -995,1220 +1776,250 @@ msgstr ""
"\n"
"Ados zaude partizio guztiak galtzearekin?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Errorea"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Egin babeskopia berria leheneratu aurretik (inkrementaletan soilik.)"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "zerbitzaria"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "\\/*%s ataka paraleloko inprimagailua"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Izena: "
+
+#: ../../raid.pm:1
#, c-format
-msgid "with /usr"
-msgstr "/usr-rekin"
+msgid "mkraid failed"
+msgstr "mkraid-ek huts egin du"
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "simple"
-msgstr "sinplea"
+msgid "Button 3 Emulation"
+msgstr "3. botoiaren emulazioa"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "%s partizioa formateatzen"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Sending files..."
+msgstr "Fitxategiak bidaltzen..."
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errorea %s desmuntatzean: %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israeldarra (fonetikoa)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%s partizioa %s direktorioan muntatzeak huts egin du"
+msgid "access to rpm tools"
+msgstr "rpm tresnen atzipena"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "%s partizioa formateatzen"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr "editatu"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "%s kopiatzen"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Inprimagailua/gailua aukeratu/adierazi behar duzu!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "%s partizioa formateatzen"
+msgid "Permission problem accessing CD."
+msgstr "Baimen arazoa CD atzipenean."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fitxategia sortzen eta formateatzen"
+msgid "Phone number"
+msgstr "Telefono-zenbakia"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Ez dago zure soinu txartelarentzako gidari ezagunik (%s)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ez dakit nola formateatu %s %s motan"
+msgid "Printer name, description, location"
+msgstr "Inprimagailuaren izena, azalpena, kokalekua"
-# #this syntax doesn't work yet in perl :-(
-# #msgid "%s formatting of %s failed"
-# #msgstr "%2$s(r)i %1$s formatua emateak huts egin du"
-#: ../../fs.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s(r)i formatua emateak huts egin du"
+msgid "USA (broadcast)"
+msgstr "AEB (bcast)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Egin klik \"Ados\" botoian disko gogor honetako datu eta partizio guztiak\n"
-"ezabatu nahi badituzu. Kontuz ibili, \"Ados\" sakatu ondoren, ezin izango\n"
-"duzu disko gogor honetako daturik eta partiziorik berreskuratu, Windows-eko\n"
-"datuak barne.\n"
-"\n"
-"Egin klik \"Utzi\" botoian disko gogor honetako daturik eta partiziorik\n"
-"galdu gabe eragiketa hau bertan behera uzteko."
+"Aukeratu babeskopia \n"
+"egiteko euskarria."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Aukeratu Mandrake Linux-en partizio berria instalatzeko ezabatu nahi duzun\n"
-"disko gogorra. Kontuz ibili, bertako datu guztiak galduko dira eta ezin\n"
-"izango dira berreskuratu!"
+msgid "Use Xinerama extension"
+msgstr "Erabili Xinerama hedapena"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
+msgid "Loopback"
+msgstr "Atzera-begizta"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
+"Ezin da mkbootdisk behar bezala itxi: \n"
+" %s \n"
+" %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh hardwarerako abioko kargatzaile bat da.\n"
-"GNU/Linux, MacOS, edo MacOSX abiaraz dezake, ordenagailuan egonez gero.\n"
-"Normalean, beste sistema eragile horiek ongi detektatzen eta instalatzen\n"
-"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi dezakezu.\n"
-"Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
-"\n"
-"Yaboot-en aukera nagusiak hauek dira:\n"
-"\n"
-" * Hasierako mezua: abioko gonbitaren aurretik agertzen den testu-mezu soil\n"
-"bat;\n"
-"\n"
-" * Abioko gailua: GNU/Linux-ekin abiarazteko behar den informazioa non\n"
-"kokatu nahi duzun adierazten du. Normalean, lehenago bootstrap partizio bat\n"
-"konfiguratuko duzu informazio hori edukitzeko.\n"
-"\n"
-" * Open Firmware-ren atzerapena: LILOrekin ez bezala, bi atzerapen daude\n"
-"erabilgarri yaboot-ekin. Lehen atzerapena segundotan neurtzen da, eta hemen\n"
-"CD, OF abioa MacOS edo Linux aukera dezakezu;\n"
-"\n"
-" * Nukleoaren abioaren denbora-muga: denbora-muga hau LILOren abioko\n"
-"atzerapenaren antzekoa da. Linux hautatu ondoren, 0,1 segundoko atzerapena\n"
-"izango duzu lehenetsitako nukleo-deskribapena hautatu aurretik;\n"
-"\n"
-" * Gaitu CDtik abiaraztea?: aukera hau hautatzen baduzu, ``C'' aukeratu\n"
-"ahal izango duzu CDarentzat abioko lehen gonbitean;\n"
-"\n"
-" * Gaitu OF abiaraztea?: aukera hau hautatzen baduzu, ``N'' aukeratu ahal\n"
-"izango duzu Open Firmware-rentzat abioko lehen gonbitean;\n"
-"\n"
-" * SE lehenetsia: lehenespenez zein SE abiaraziko den hauta dezakezu Open\n"
-"Firmware Atzerapena igarotzen denean."
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "West Europe"
+msgstr "Europa Mendebaldea"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Sarrera gehiago erants ditzakezu yaboot-entzat, beste sistema eragile\n"
-"batzuk, nukleo alternatiboak edo emergentziazko abioko imajina gehitzeko.\n"
-"\n"
-"Beste SEentzat, etiketa eta \"erroko\" partizioa soilik da sarrera.\n"
-"\n"
-"Linux-entzat, hainbat aukera daude:\n"
-"\n"
-" * Etiketa: yaboot-en gonbitean idatzi beharko duzun izena da, abioko\n"
-"aukera hau hautatzeko;\n"
-"\n"
-" * Imajina: abiarazi beharreko nukleoaren izena izango da. Normalean,\n"
-"vmlinux edo vmlinux-en aldaera bat, luzapen batekin;\n"
-"\n"
-" * Errokoa: Linux instalazioaren \"erroko\" gailua edo ``/'';\n"
-"\n"
-" * Erantsi: Apple hardwarean, nukleoa eransteko aukera bideo-hardwarea\n"
-"hasieratzen laguntzeko erabiltzen da askotan, edo ohiko Apple saguetan\n"
-"gehienetan falta izaten diren 2. eta 3. botoien emulazioa gaitzeko\n"
-"teklatuan. Hona hemen adibide batzuk:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: aukera hau hasierako moduluak kargatzeko erabil daiteke, abioko\n"
-"gailua erabilgarri egon aurretik, edo ramdisk imajina bat kargatzeko\n"
-"emergentziazko abioa egin behar denean;\n"
-"\n"
-" * Initrd-tamaina: ramdisk-tamaina lehenetsia 4.096 bytekoa izan ohi da.\n"
-"Ramdisk handi bat esleitu behar baduzu, aukera hau erabil dezakezu;\n"
-"\n"
-" * Irakurri/idatzi: normalean \"erroko\" partizioa irakurtzeko soilik\n"
-"agertzen da hasieran, fitxategi-sistemak egiaztatu ahal izateko, sistema\n"
-"``aktibo'' egin aurretik. Hemen, aukera hori gaindidatz dezakezu;\n"
-"\n"
-" * BideorikEz: Apple bideoaren hardwarea bereziki problematikoa bada,\n"
-"aukera hau hauta dezakezu ``bideorikez'' moduan abiarazteko, jatorrizko\n"
-"frame buffer euskarriarekin;\n"
-"\n"
-" * Lehenetsia: sarrera hau hautatzen du Linux-en hautapen lehenetsi gisa,\n"
-"eta yaboot-en gonbitean SARTU sakatuz hauta daiteke. Sarrera hau ``*''\n"
-"batez nabarmenduko da, [Tab] sakatzen baduzu abioko hautapenak ikusteko."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakXk zure ordenagailuan dagoen edozein IDE gailu detektatzen du orain.\n"
-"Zure sisteman PCI SCSI txartel bat edo gehiago dagoen ikusteko ere\n"
-"eskaneatuko du. SCSI txartel bat aurkitzen badu, DrakXk automatikoki\n"
-"instalatuko du kontrolatzaile egokia.\n"
-"\n"
-"Hardwarearen detekzioak batzuetan hardwareren bat ezingo duenez detektatu,\n"
-"DrakXk PCI SCSI txartelik ote dagoen berresteko eskatuko dizu. Sakatu\n"
-"\"Bai\" zure makinan SCSI txartel bat instalatuta dagoela badakizu. SCSI\n"
-"txartelen zerrenda bat aurkeztuko zaizu, bertan aukeratzeko. Sakatu \"Ez\"\n"
-"SCSI hardwarerik ez baduzu. Ziur ez bazaude, zure ordenagailuan\n"
-"detektatutako hardware-zerrenda ikus dezakezu \"Ikus hardwareari buruzko\n"
-"informazioa\" hautatuz eta \"Ados\" sakatuz. Aztertu hardware-zerrenda eta\n"
-"egin klik \"Ados\" botoian SCSI interfazearen galderara itzultzeko.\n"
-"\n"
-"Moldagailua eskuz zehaztu behar baduzu, DrakXk haren aukerak zehaztu nahi\n"
-"dituzun galdetuko dizu. Hardwareak hasieratzeko behar dituen aukera\n"
-"zehatzak bila ditzan, hardwarea aztertzen utzi beharko zenioke DrakXri.\n"
-"Horrek ondo funtzionatu ohi du.\n"
-"\n"
-"DrakXk pasatu behar diren aukerak egiaztatu ezin baditu, aukerak eskuz eman\n"
-"beharko dizkiozu kontrolatzaileari. Eskatutako parametroak\n"
-"fabrikatzailearen web orritik (Interneteko sarbidea baduzu) edo Microsoft\n"
-"Windows-etik (hardware hau zure sisteman Windows-ekin erabili baduzu)\n"
-"eskuratzeko aholkuak lortzeko, ikus ``Erabiltzailearen gida'' (3.\n"
-"kapituluan, ``Zure hardwareari buruzko informazioa bildu'' atalean)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 bertsioa %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Hemen zure ordenagailuaren inprimatzeko sistema hautatuko dugu. Beste SE\n"
-"batzuek bakarra eskainiko dute beharbada, baina Mandrake Linux-ek hiru\n"
-"eskaintzen ditu.\n"
-"\n"
-" * \"pdq\" - ``print, don't queue'' esan nahi du, hau da, ``inprimatu, ez\n"
-"egon ilaran''. Aukera egokia da inprimagailua zuzenean konektatuta baduzu,\n"
-"papera trabatzen denean ohartu nahi baduzu eta sareko inprimagailurik ez\n"
-"baduzu. Sareko oso kasu sinpleak maneiatuko ditu eta mantso samarra da\n"
-"sarerako. Aukeratu \"pdq\" GNU/Linux-eko zure lehen bidaia bada.\n"
-"Instalazioa egin ondoren aukerak aldatu nahi badituzu, exekutatu\n"
-"Mandrake-ren kontrol-zentroko PrinterDrake eta egin klik adituaren botoian.\n"
-"\n"
-" * \"CUPS\" - ``Common Unix Printing System'' oso ona da zure inprimagailu\n"
-"lokalean inprimatzeko eta baita munduaren beste aldean ere. Sinplea da eta\n"
-"\"lpd\" inprimatze-sistema zaharretako bezero nahiz zerbitzari gisa jardun\n"
-"dezake. Lehengo sistemekin bateragarria da, beraz. Gauza asko egin ditzake,\n"
-"baina oinarrizko konfigurazioa \"pdq\" bezain erraza da. \"lpd\" zerbitzari\n"
-"bat emulatzeko behar baduzu, \"cups-lpd\" daemon-a aktibatu behar duzu.\n"
-"Inprimagailuaren aukerak hautatzeko edo inprimatzeko interfaze grafikoak\n"
-"ditu.\n"
-"\n"
-" * \"lprNG\" - ``line printer daemon New Generation''. Sistema honek\n"
-"besteek egin ditzaketen gauza bertsuak egin ditzake, baina Novell sarean\n"
-"muntatutako inprimagailuetan inprimatuko du, IPX protokoloa onartzen\n"
-"duelako, eta shell komandoetan zuzenean inprima dezakeelako. Novell behar\n"
-"baduzu edo kanalizaziorik erabili gabe komandoetan inprimatu behar baduzu,\n"
-"erabili lprNG. Bestela, hobe da CUPS, sareetan lan egiteko sinpleagoa eta\n"
-"hobea delako."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "%s kopiatzen"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Choose color"
+msgstr "Aukeratu kolorea"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (LInux LOader) eta grub abioko kargatzaileak dira: GNU/Linux edo\n"
-"ordenagailuan dagoen beste edozein sistema eragile abiaraz dezakete.\n"
-"Normalean, beste sistema eragile horiek ongi detektatu eta instalatzen\n"
-"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi dezakezu.\n"
-"Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
-"\n"
-"Beharbada, ez duzu nahiko beste sistema eragile horietan inor sartzerik.\n"
-"Horrela bada, sistema eragile horien sarrerak ezaba ditzakezu. Baina gero,\n"
-"abioko disko bat beharko duzu beste sistema eragile horiek abiarazteko!"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikar errepublika"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"LILO eta grub abioko kargatzaileak dira. Etapa hau erabat automatizatuta\n"
-"izaten da normalean. Izan ere, DrakXk diskoaren abioko sektorea aztertzen\n"
-"du eta bertan aurkitzen duenaren arabera jokatzen du:\n"
-"\n"
-" * Windows-en abioko sektore bat aurkitzen badu, grub abioko sektorearekin\n"
-"ordeztuko du. Horrela, GNU/Linux edo beste SE bat kargatu ahal izango duzu;\n"
-"\n"
-" * grub edo LILO abioko sektore bat aurkitzen badu, berri batekin ordeztuko\n"
-"du.\n"
-"\n"
-"Zalantzarik izanez gero, DrakXk hainbat aukera proposatuko ditu.\n"
-"\n"
-" * \"Erabili beharreko abioko kargatzailea\": hiru aukera dituzu:\n"
-"\n"
-" * \"GRUB\": grub nahiago baduzu (testu-menua).\n"
-"\n"
-" * \"LILO menu grafikoarekin\": LILO bere interfaze grafikoarekin\n"
-"nahiago baduzu.\n"
-"\n"
-" * \"LILO testu-menuarekin\": LILOen testu-menuaren interfazea nahiago\n"
-"baduzu.\n"
-"\n"
-" * \"Abioko gailua\": gehienetan, ez duzu disko lehenetsia (\"/dev/hda\")\n"
-"aldatuko, baina nahiago baduzu, abioko kargatzailea bigarren disko\n"
-"gogorrean (\"/dev/hdb\") edo diskete batean (\"/dev/fd0\") ere instala\n"
-"daiteke;\n"
-"\n"
-" * \"Imajina lehenetsia abiarazi arteko atzerapena\": ordenagailua\n"
-"berrabiaraztean, hau da erabiltzaileari ematen zaion denbora, abioko\n"
-"kargatzailearen menuan lehenetsia ez den abioko sarrera bat aukeratzeko.\n"
-"\n"
-"!! Kontuan izan abioko kargatzaile bat ez instalatzea aukeratzen baduzu\n"
-"(hemen \"Utzi\" hautatuz), Mandrake Linux sistema abiarazteko bideren bat\n"
-"beharko duzula! Halaber, edozein aukera aldatu aurretik, ziurtatu\n"
-"badakizula zer egiten duzun. !!\n"
-"\n"
-"Elkarrizketa-koadro honetako \"Aurreratua\" botoian klik eginda aukera\n"
-"aurreratu ugari lortuko dituzu, erabiltzaile adituentzat erreserbatuak.\n"
-"\n"
-"Abioko kargatzailearen parametro orokorrak konfiguratutakoan, abioan\n"
-"erabilgarri egongo diren aukeren zerrenda bistaratuko da.\n"
-"\n"
-"Ordenagailuan beste sistema eragile bat instalatuta baduzu, automatikoki\n"
-"gehituko zaio abioko menuari. Hemen, lehendik dauden aukerak gehiago\n"
-"zehaztea hauta dezakezu. Hautatu sarrera bat eta egin klik \"Aldatu\"n\n"
-"aldaketak egiteko edo kentzeko; \"Gehitu\"k sarrera berria sortzen du eta\n"
-"\"Eginda\" hautatuz gero instalazioaren hurrengo urratsera joaten da."
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swazilandia"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Hau da erabakigunerik funtsezkoena GNU/Linux sistemaren segurtasunerako:\n"
-"\"root\"-aren pasahitza adierazi behar duzu. \"root\"\n"
-"sistema-administratzailea da eta berak bakarrik dauka sistema eguneratzeko,\n"
-"erabiltzaileak gehitzeko, konfigurazio orokorra aldatzeko eta abar egiteko\n"
-"baimena. Labur esanda, \"root\"-ak edozer egin dezake! Horregatik, asmatzen\n"
-"zaila den pasahitza aukeratu behar duzu - errazegia bada, DrakXk abisatuko\n"
-"dizu. Ikus dezakezunez, pasahitzik ez sartzea aukera dezakezu, baina\n"
-"horrelakorik ez egiteko aholkua ematen dizugu, arrazoi batengatik: ez\n"
-"pentsa GNU/Linux-ekin abiarazi duzulako zure beste sistema eragileek\n"
-"akatsik eduki ezin dutenik. \"root\"-ak muga guztiak gaindi ditzakeenez,\n"
-"eta partizioetan arduragabeki sartuz partizioetako datu guztiak nahi gabe\n"
-"ezaba ditzakeenez, garrantzitsua da \"root\" bilakatzea zaila izatea.\n"
-"\n"
-"Pasahitzak gutxienez 8 karaktere izatea komeni da, letrak eta zenbakiak\n"
-"nahasian. Ez inoiz idatzi \"root\"-aren pasahitza paperean - sistema\n"
-"errazegi konprometituko bailuke.\n"
-"\n"
-"Dena den, ez egin pasahitz luzeegia edo konplikatuegia, ahalegin handirik\n"
-"gabe gogoratzeko gai izan behar duzulako.\n"
-"\n"
-"Pasahitza ez da idatzi ahala pantailan bistaratuko. Horregatik, pasahitza\n"
-"bi aldiz idatzi beharko duzu, akats tipografikoen aukera murrizteko. Akats\n"
-"tipografiko bera bi aldiz egiten baduzu, pasahitz ``oker'' hori erabili\n"
-"beharko duzu konektatzen zaren lehen aldian.\n"
-"\n"
-"Aditu moduan, NIS edo LDAP moduko autentifikazio-zerbitzari batekin\n"
-"konektatuko zaren galdetuko zaizu.\n"
-"\n"
-"Zure sareak LDAP (edo NIS) protokoloa erabiltzen badu autentifikatzeko,\n"
-"hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ez badakizu, galdetu\n"
-"sare-administratzaileari.\n"
-"\n"
-"Zure ordenagailua administratutako sare batekin konektatuta ez badago,\n"
-"beharbada \"Fitxategi lokalak\" aukeratu nahi izango dituzu\n"
-"autentifikaziorako."
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr "Set-UID"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Hautatu ataka egokia. Adibidez Windows-eko \"COM1\" atakak \"ttyS0\" du\n"
-"izena GNU/Linux-en."
+msgid "Please check if you are using CDRW media"
+msgstr "Hautatu CDRW euskarria erabiltzen baduzu"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"DrakXk normalean detektatzen du saguak zenbat botoi dituen. Detektatu ezin\n"
-"badu, bi botoiko sagua duzula suposatuko du, eta hirugarren botoia emula\n"
-"dezan konfiguratuko du. DrakXk automatikoki jakingo du sagua PS/2, seriekoa\n"
-"edo USB motakoa den.\n"
-"\n"
-"Beste mota bateko sagua zehaztu nahi baduzu, hautatu dagokion mota\n"
-"zerrendan.\n"
-"\n"
-"Lehenetsitakoa ez den sagu aukeratzen baduzu, probako pantaila bat azalduko\n"
-"da. Erabili botoiak eta gurpila ezarpenak egokiak direla egiaztatzeko.\n"
-"Saguak ez badu behar bezala funtzionatzen, sakatu zuriune-barra edo\n"
-"[Itzuli], bertan behera \"Utzi\" eta berriro aukeratzeko."
+"Aukeratu Mandrake Linux-en partizio berria instalatzeko ezabatu nahi duzun\n"
+"disko gogorra. Kontuz ibili, bertako datu guztiak galduko dira eta ezin\n"
+"izango dira berreskuratu!"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Aukeratu instalaziorako eta sisteman erabiltzeko nahi duzun hizkuntza.\n"
-"\n"
-"\"Aurreratua\" botoian klik eginez, lan-estazioan instalatzeko beste\n"
-"hizkuntza batzuk hautatu ahal izango dituzu. Beste hizkuntzaren bat\n"
-"hautatzean, sistemaren dokumentaziorako eta aplikazioetarako fitxategi\n"
-"espezifikoak instalatuko dira. Adibidez, zure ordenagailuan Espainiako\n"
-"erabiltzaileei ostatu eman behar badiezu, zuhaitz-ikuspegian hautatu\n"
-"euskara hizkuntza nagusi gisa, eta Aurreratua atalean, egin klik\n"
-"\"Spanish|Spain\"ri dagokion laukian.\n"
-"\n"
-"Kontuan hartu hizkuntza bat baino gehiago instala daitezkeela. Hizkuntza\n"
-"gehigarriak aukeratutakoan, egin klik \"Ados\" botoian jarraitzeko."
+msgid " on parallel port \\#%s"
+msgstr " - \\/*%s ataka paraleloan"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Normalean, DrakXk teklatu egokia hautatuko dizu (aukeratutako hizkuntzaren\n"
-"arabera) eta urrats hau ikusi ere ez duzu egingo. Dena den, baliteke zure\n"
-"hizkuntzari zehazki dagokion teklatua ez edukitzea: adibidez, ingelesez\n"
-"dakien suitzarra bazara, hizkuntza ingelesa hautatu arren Suitzako teklatua\n"
-"nahi izango duzu seguru asko. Edo ingeles hiztuna bazara baina Quebec-en\n"
-"bazaude, egoera berean egon zintezke. Bi kasuetan, instalazio-urrats\n"
-"honetan atzera jo eta teklatu egokia hautatu beharko duzu zerrendan.\n"
-"\n"
-"Egin klik \"Gehiago\" botoian onartzen diren teklatuen zerrenda osoa\n"
-"ikusteko."
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Erabili %c eta %c teklak zein sarrera nabarmenduko den hautatzeko."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "2 botoiko sagu generikoa"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Kendu bolumen logikoak lehendabizi\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Microsoft partizio bat baino gehiago detektatu da zure disko gogorrean.\n"
-"Aukeratu Mandrake Linux sistema eragile berria instalatzeko tamainaz aldatu\n"
-"nahi duzuna.\n"
-"\n"
-"Partizio bakoitza honela zerrendatzen da: \"Linux izena\", \"Windows\n"
-"izena\" \"Edukiera\".\n"
-"\n"
-"\"Linux izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko\n"
-"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" izango da disko gogorra IDE disko gogorra\n"
-"bada, eta \"sd\", SCSI unitatea bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\" ren ondoko letra bat\n"
-"izaten da. IDE disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du;\n"
-"\n"
-" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi\n"
-"du;\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi\n"
-"du;\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi\n"
-"du;\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
-"letrak \"bigarren SCSI ID baxuena\", etab.\n"
-"\n"
-"\"Windows izena\" Windows-en disko gogorraren letra da (lehen diskoak edo\n"
-"partizioak \"C:\" du izena)."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Nabarmendutako sarrera automatikoki abiaraziko da %d segundotan."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakboot:1
+#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Orain, Mandrake Linux sistema instalatzeko zein partizio erabiliko d(ir)en\n"
-"aukeratu behar duzu. Partizioak jadanik definituta badaude, (GNU/Linux-en\n"
-"aurreko instalazio batek edo beste partizio-tresna batek definituta),\n"
-"lehendik dauden partizioak erabil ditzakezu. Bestela, disko gogorreko\n"
-"partizioak definitu behar dira.\n"
-"\n"
-"Partizioak sortzeko, lehendabizi disko gogor bat hautatu behar duzu.\n"
-"Partizioa egiteko diskoa hautatzeko, sakatu ``hda'' lehen IDE unitaterako,\n"
-"``hdb'' bigarrenerako, ``sda'' lehen SCSI unitaterako eta abar.\n"
-"\n"
-"Hautatutako disko gogorraren partizioa egiteko, aukera hauek erabil\n"
-"ditzakezu:\n"
-"\n"
-" * \"Garbitu dena\": aukera honek hautatutako disko gogorreko partizio\n"
-"guztiak ezabatuko ditu;\n"
-"\n"
-" * \"Auto-esleitu\": aukera honekin automatikoki sor ditzakezu \"Ext2\" eta\n"
-"swap partizioak disko gogorreko leku librean;\n"
-"\n"
-" * \"Gehiago\": eginbide gehiago aukeran izateko:\n"
-"\n"
-" * \"Gorde partizio-taula\": partizio-taula diskete batean gordetzen du.\n"
-"Baliagarria de geroago partizio-taula berreskuratzeko, behar izanez gero.\n"
-"Oso gomendagarria da urrats hau egitea;\n"
-"\n"
-" * \"Leheneratu partizio-taula\": lehen gordetako partizio-taula\n"
-"disketetik berreskuratzeko erabil daiteke;\n"
-"\n"
-" * \"Berreskuratu partizio-taula\": partizio-taula hondatuta badago,\n"
-"berreskuratzen saia zaitezke aukera hau erabiliz. Kontuz ibili eta gogoan\n"
-"izan huts egin dezakeela;\n"
-"\n"
-" * \"Birkargatu partizio-taula\": aldaketa guztiak desegin eta hasierako\n"
-"partizio-taula kargatzen du;\n"
-"\n"
-" * \"Euskarri aldagarrien automuntatzea\": aukera hau desgaitzen baduzu,\n"
-"euskarri aldagarriak (disketeak, CD-ROMak eta horrelakoak) eskuz muntatu\n"
-"eta desmuntatzera behartuko dituzu erabiltzaileak.\n"
-"\n"
-" * \"Morroia\": erabili aukera hau disko gogorreko partizioa egiteko\n"
-"morroia erabili nahi baduzu. Partizioak egiten ongi ez badakizu, morroia\n"
-"erabiltzea gomendatzen dizugu;\n"
-"\n"
-" * \"Desegin\": aukera hau aldaketak bertan behera uzteko erabil dezakezu;\n"
-"\n"
-" * \"Aldatu modu normalera/aditu modura\": partizioekin gauza gehiago\n"
-"egiteko aukera ematen du (mota, aukerak, formatua) eta informazio gehiago\n"
-"ematen du;\n"
-"\n"
-" * \"Eginda\": disko gogorrean partizioak egiten bukatutakoan, aldaketak\n"
-"berriro diskoan gordeko ditu.\n"
-"\n"
-"Oharra: edozein aukera eskura dezakezu teklatuaren bidez. Partizio batetik\n"
-"bestera joateko, [Tab] eta [Gora/Behera] geziak erabil ditzakezu.\n"
-"\n"
-"Partizio bat hautatuta dagoenean, aukera hauek dituzu:\n"
-"\n"
-" * Ktrl-c beste partizio bat sortzeko (partizio huts bat hautatuta\n"
-"dagoenean);\n"
-"\n"
-" * Ktrl-d partizioa ezabatzeko;\n"
-"\n"
-" * Ktrl-m muntatze-puntua ezartzeko.\n"
-"\n"
-"Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa nahi\n"
-"baduzu, irakurri ext2fs kapitulua ``Erreferentzia-eskuliburua''n.\n"
-"\n"
-"PPC makina batean instalatu behar baduzu, gutxienez 1 MBko HFS\n"
-"``bootstrap'' partizio txiki bat sortzea komeniko zaizu, yaboot abioko\n"
-"kargatzaileak erabil dezan. Partizioa zertxobait handiagoa egitea hautatzen\n"
-"baduzu, adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat eta\n"
-"ramdisk imajinak biltegiratzeko emergentziazko abioa egin ahal izateko."
+"Ezin da /etc/sysconfig/bootsplash idatzi\n"
+"Ez da fitxategia aurkitu."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Honaino iritsita, ordenagailuarentzat nahi duzun segurtasun-maila\n"
-"aukeratzeko garaia da. Oro har, makina zenbat eta babesgabeago egon eta\n"
-"zenbat eta funtsezko datu gehiago eduki biltegiratuta, orduan eta\n"
-"segurtasun-maila handiagoa behar da. Bestalde, segurtasun-maila handia,\n"
-"erabiltzeko erraztasunaren kalterako izan ohi da. Ikus ``Erreferentziako\n"
-"eskuliburua''ren \"msec\" atala maila horien esanahiari buruzko informazio\n"
-"gehiago lortzeko.\n"
-"\n"
-"Zer aukeratu ez badakizu, eutsi aukera lehenetsiari."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Interneterako sarbidea"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Mandrake Linux instalatzen duzunean, litekeena da pakete batzuk aldatu\n"
-"izana hasierako argitalpenetik. Beharbada akats batzuk konponduko ziren,\n"
-"eta segurtasun-arazoak gaindituko ziren. Eguneratzeez baliatu ahal izan\n"
-"zaitezen, Internetik deskargatzea gomendatzen dizugu. Aukeratu \"Bai\"\n"
-"Interneteko konexioa martxan badaukazu, edo \"Ez\" pakete eguneratuak\n"
-"geroago instalatu nahi badituzu.\n"
-"\n"
-"\"Bai\" aukeratzen baduzu, eguneratzeak eskaintzen dituzten lekuen zerrenda\n"
-"azalduko da. Aukeratu zuregandik hurbilen dagoena. Paketeak hautatzeko\n"
-"zuhaitza agertuko da orduan: egin hautapena eta sakatu \"Instalatu\"\n"
-"hautatutako paketeak hartu eta instalatzeko, edo \"Utzi\" abortatzeko."
+"testu-laukiaren y koordenatua\n"
+"karaktere kopurutan"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Partizio definitu berriak formateatu egin behar dira erabili ahal izateko\n"
-"(formateatzeak fitxategi-sistema sortzea esan nahi du).\n"
-"\n"
-"Une honetan, lehendik dauden partizio batzuei berriro formatua eman nahi\n"
-"izango diezu beharbada, dauzkaten datuak ezabatzeko. Hori egin nahi baduzu,\n"
-"hauta itzazu partizio horiek ere.\n"
-"\n"
-"Kontuan izan ez dela beharrezkoa lehendik dauden partizio guztiei berriro\n"
-"formatua ematea. Sistema eragilea daukaten partizioak berriro formateatu\n"
-"behar dituzu (esaterako \"/\", \"/usr\" edo \"/var\"), baina ez mantendu\n"
-"nahi dituzun datuak dituztenak (adibide tipikoa \"/home\" da).\n"
-"\n"
-"Kontuz ibili partizioak hautatzean. Formateatu ondoren, hautatutako\n"
-"partizioetako datu guztiak ezabatu egingo dira eta ezin izango duzu bat ere\n"
-"berreskuratu.\n"
-"\n"
-"Sakatu \"Ados\" partizioak formateatzeko prest zaudenean.\n"
-"\n"
-"Sakatu \"Utzi\" Mandrake Linux sistema eragile berria instalatzeko beste\n"
-"partizio bat aukeratu nahi baduzu.\n"
-"\n"
-"Sakatu \"Aurreratua\" partizio batzuk aztertu nahi badituzu hondatutako\n"
-"blokerik duten ikusteko."
+"Uneko inprimagailuaren aukera erabilgarrien zerrenda eskuratzeko, egin klik "
+"\"Inprimatzeko aukeren zerrenda\" botoian."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Hortxe duzu. Instalazioa osatu da eta GNU/Linux sistema prest duzu\n"
-"erabiltzeko. Sakatu \"Ados\" sistema berrabiarazteko. GNU/Linux edo\n"
-"GNU/Linux abiaraz dezakezu, nahiago duzuna (abio bikoitza izanez gero),\n"
-"ordenagailua berrabiarazi bezain laster.\n"
-"\n"
-"\"Aurreratua\" botoiak (Aditu moduan soilik) beste bi botoi erakusten ditu:\n"
-"\n"
-" * \"sortu auto-instalazioko disketea\": instalazio oso bat, oraintxe\n"
-"konfiguratu duzuna bezalakoa, operadore baten laguntzarik gabe automatikoki\n"
-"egingo duen instalazio-diskete bat sortzeko.\n"
-"\n"
-" Kontuan izan beste bi aukera daudela erabilgarri botoian klik egitean:\n"
-"\n"
-" * \"Errepikatu\". Hau partzialki automatizatutako instalazioa da,\n"
-"partizio-urratsa (eta hau soilik) interaktiboa izango baita.\n"
-"\n"
-" * \"Automatizatua\". Erabat automatizatutako instalazioa: disko gogorra\n"
-"erabat berridatziko da, eta datu guztiak galduko dira.\n"
-"\n"
-" Eginbide hau oso praktikoa da antzeko ordenagailu asko instalatzen\n"
-"direnerako. Ikus Auto-instalazioa atala gure web gunean;\n"
-"\n"
-" * \"Gorde pakete-hautapena\"(*): lehen egindako pakete-hautapena gordetzen\n"
-"du. Gero, beste instalazio bat egitean, sartu disketea unitatean eta\n"
-"instalazioa exekutatzeko, joan laguntza-pantailara [F1] tekla sakatuz eta\n"
-"idatzi >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) FAT formatudun disketea behar duzu (GNU/Linux-en horrelako diskete bat\n"
-"sortzeko, idatzi \"mformat a:\")"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Zerbitzariak gaitzen..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Proba-orria(k) inprimatzen..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Jadanik badago %s muntatze-puntua duen partizio bat\n"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
@@ -2231,51 +2042,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Hona iritsita, Mandrake Linux sistema eragilea disko gogorrean non\n"
"instalatu aukeratu beharko duzu. Disko gogorra hutsik badago edo lehendik\n"
@@ -2343,199 +2152,111 @@ msgstr ""
"oso erraz gal ditzakezu. Beraz, ez aukeratu hau baldin eta ez badakizu zer\n"
"egiten ari zaren."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Azkenik, abioan interfaze grafikoa ikusi nahi duzun galdetuko zaizu.\n"
-"Kontuan izan galdera hori konfigurazioa ez probatzea aukeratu baduzu ere\n"
-"egingo zaizula. Jakina, \"Ez\" erantzun nahi izango duzu zure ordenagailuak\n"
-"zerbitzari gisa jokatu behar badu, edo bistaratzea konfiguratzea lortzen ez\n"
-"baduzu."
+msgid "Ukraine"
+msgstr "Ukraina"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "Aplikazioa:"
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "External ISDN modem"
+msgstr "Kanpoko ISDN modema"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Your choice? (default %s) "
+msgstr "Zure aukera? (%s lehenetsia) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Reunion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
msgstr ""
-"GNU/Linux-ek GMT (Greenwich Mean Time) ordua erabiltzen du eta tokian\n"
-"tokiko ordura aldatzen du, hautatutako ordu-zonaren arabera. Desaktibatu\n"
-"nahi baduzu, desautatu \"Hardwarearen ordua GMTn ezarria\", hardwarearen\n"
-"ordua eta sistemaren ordua berdinak izan daitezen. Erosoa da makinan beste\n"
-"sistema eragile bat dagoenerako, esate baterako, Windows.\n"
+"Proba-orria(k) inprimagailura bidali dira.\n"
+"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
+"Inprimatze-egoera:\n"
+"%s\n"
"\n"
-"\"Ordu-sinkronizazio automatikoa\" aukerak automatikoki doituko du erlojua\n"
-"Interneteko urruneko ordu-zerbitzari batekin konektatuz. Aukera ezazu\n"
-"zuregandik hurbil dagoen zerbitzari bat. Eginbide hau erabili ahal izateko\n"
-"Interneteko konexioa beharko duzu, noski. Zure makinan ordu-zerbitzari bat\n"
-"instalatuko du eta zure sare lokaleko beste makina batzuetatik ere erabili\n"
-"ahal izango duzu, nahi izanez gero."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
+msgstr "egunero"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "and one unknown printer"
msgstr ""
-"Orain abioan zein zerbitzu abiaraztea nahi duzun aukera dezakezu.\n"
"\n"
-"Hemen uneko instalazioan erabilgarri dauden zerbitzu guztiak ageri dira.\n"
-"Azter itzazu arretaz eta kendu hautatze-marka abiaraztean beti behar ez\n"
-"direnei.\n"
-"\n"
-"Zerbitzu jakin bat hautatuz, zerbitzu horri buruzko azalpen-testu labur bat\n"
-"eskuratuko duzu. Hala ere, zerbitzu bat erabilgarria den ala ez ziur ez\n"
-"bazaude, seguruagoa da jokabide lehenetsia uztea.\n"
-"\n"
-"!! Etapa honetan, oso kontuz ibili zure makina zerbitzari gisa erabiltzeko\n"
-"asmoa baduzu: seguru asko ez duzu behar ez duzun zerbitzurik abiarazi nahi\n"
-"izango. Gogoan izan zerbitzu batzuk arriskutsuak izan daitezkeela\n"
-"zerbitzari batean gaitzen badira. Oro har, benetan behar dituzun zerbitzuak\n"
-"soilik hautatu. !!"
+"eta inprimagailu ezezagun bat dago "
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Irlanda"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "nukleo-bertsioa"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " leheneratzeko konfigurazioa "
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Zuzena da?"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
@@ -2543,11 +2264,11 @@ msgstr ""
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2584,6202 +2305,6650 @@ msgstr ""
"Sarea geroago, instalazioa egin ondoren, konfiguratu nahi baduzu, edo\n"
"sare-konexioa konfiguratzen bukatu baduzu, sakatu \"Utzi\"."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Azkenik, pakete indibidualak hautatu ala ez aukeraren arabera, pakete\n"
-"guztiak taldetan eta azpitaldetan sailkatuta dituen zuhaitz bat aurkeztuko\n"
-"zaizu. Zuhaitza arakatuz, talde osoak, azpitaldeak nahiz pakete\n"
-"indibidualak hautatu ahal izango dituzu.\n"
-"\n"
-"Zuhaitzean pakete bat hautatzen duzun bakoitzean, azalpen bat agertuko da\n"
-"eskuinean. Hautapena amaitutakoan, egin klik \"Instalatu\" botoian, eta\n"
-"instalazio-prozesua abiaraziko da. Zure hardwarearen abiaduraren arabera\n"
-"eta instalatu behar diren paketeen kopuruaren arabera, denbora beharko da\n"
-"prozesua burutzeko. Dena instalatzeko behar duen denboraren estimazioa\n"
-"pantailan bistaratzen da, kafetxo bat hartzeko astirik ote duzun jakin\n"
-"dezazun.\n"
-"\n"
-"!! Zerbitzari-pakete bat hautatu baduzu, nahita edo talde oso baten zati\n"
-"zelako, zerbitzari horiek benetan instalatu nahi dituzun berresteko\n"
-"eskatuko zaizu. Mandrake Linux-en, instalatutako zerbitzari oro\n"
-"lehenespenez abiarazten da abioan. Seguruak diren arren eta banaketa\n"
-"argitaratu zen unean arazorik sortu ez bazuten ere, gerta liteke\n"
-"segurtasun-hutsuneak aurkitzea Mandrake Linux-en bertsio hau bukatu\n"
-"ondoren. Zerbitzu jakin batek zer egin behar duen edo zergatik instalatzen\n"
-"den ez badakizu, hautatu \"Ez\". \"Bai\" sakatzean zerrendatutako\n"
-"zerbitzuak instalatuko dira, eta lehenespen gisa automatikoki abiaraziko\n"
-"dira. !!\n"
-"\n"
-"\"Mendekotasun automatikoak\" aukerak, instalatzaileak pakete bat\n"
-"automatikoki hautatzen duenean agertzen den abisu-elkarrizketa desgaitzen\n"
-"du. Hori gertatzen da instalazioa behar bezala osatzeko, beste pakete\n"
-"batekiko mendekotasuna bete behar duela erabaki duelako instalatzaileak.\n"
-"\n"
-"Zerrendaren beheko aldean dagoen disketearen ikono txikiak aurreko\n"
-"instalazio batean aukeratutako pakete-zerrenda kargatzeko aukera ematen du.\n"
-"Ikono horretan klik egitean, beste instalazio baten bukaeran sortu zenuen\n"
-"diskete bat sartzeko eskatuko zaizu. Ikus diskete hori sortzeko moduari\n"
-"buruzko azken urratsaren bigarren iradokizuna."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sisteman zein programa instalatu nahi dituzun zehazteko garaia da. Milaka\n"
-"pakete daude Mandrake Linux-entzat erabilgarri, eta ez duzu denak buruz\n"
-"jakin beharrik.\n"
-"\n"
-"CD-ROMetik instalazio estandarra egiten ari bazara, lehendabizi orain\n"
-"dituzun CDak zehazteko eskatuko zaizu (Aditu moduan soilik). Begiratu CDen\n"
-"etiketei eta nabarmendu instalaziorako erabilgarri dituzun CDei dagozkien\n"
-"laukiak. Jarraitzeko prest zaudenean, egin klik \"Ados\" botoian.\n"
-"\n"
-"Paketeak taldeka antolatuta daude, ordenagailuaren erabilera zehatzen\n"
-"arabera. Taldeak lau ataletan sailkatzen dira:\n"
-"\n"
-" * \"Laneko estazioa\": makina lan-estazio gisa erabiltzeko asmoa baduzu,\n"
-"hautatu hauetako talde bat edo gehiago;\n"
-"\n"
-" * \"Garapena\": ordenagailua programatzeko erabili behar baduzu, aukeratu\n"
-"nahi dituzun taldeak;\n"
-"\n"
-" * \"Zerbitzaria\": makina zerbitzari moduan erabili nahi baduzu, hemen\n"
-"hauta ditzakezu instalatu nahi dituzun zerbitzu ohikoenak;\n"
-"\n"
-" * \"Ingurune grafikoa\": azkenik, hemen hautatuko duzu zure ingurune\n"
-"grafiko gogokoena. Gutxienez bat hautatu behar duzu, lan-estazio grafikoa\n"
-"eduki nahi baduzu!\n"
-"\n"
-"Saguaren kurtsorea talde-izen baten gainera eramanez, talde horri buruzko\n"
-"azalpen-testu labur bat bistaratuko da. Instalazio arrunta egitean (hau da,\n"
-"bertsio-berritzea ez denean) talde guztiak desautatzen badituzu,\n"
-"elkarrizketa-koadro bat agertuko da instalazio minimoa egiteko aukerak\n"
-"proposatuz:\n"
-"\n"
-" * \"Xrekin\": ahalik eta pakete gutxien instalatu, mahaigain grafikoa\n"
-"edukitzeko behar direnak bakarrik;\n"
-"\n"
-" * \"Oinarrizko dokumentazioarekin\": oinarrizko sistema eta oinarrizko\n"
-"utilitateak eta horien dokumentazioa instalatzen du. Instalazio hau egokia\n"
-"da zerbitzaria konfiguratzeko;\n"
-"\n"
-" * \"Instalazio minimo-minimoa\": Linux sistema eragileak\n"
-"komando-lerroarekin soilik funtziona dezan bene-benetan beharrezkoa dena\n"
-"bakarrik instalatzen du. Instalazio honek 65 Mb inguru hartzen ditu.\n"
-"\n"
-"\"Pakete indibidualen hautapena\" laukia hauta dezakezu; oso erabilgarria\n"
-"izango zaizu eskaintzen diren paketeak ezagutzen badituzu, edo instalatuko\n"
-"den guztia erabat kontrolatu nahi baduzu.\n"
-"\n"
-"Instalazioa \"Bertsio-berritze\" moduan hasi baduzu, talde guztiak desauta\n"
-"ditzakezu beste paketerik instala ez dadin. Erabilgarria da lehendik dagoen\n"
-"sistema bat konpontzeko edo eguneratzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linux instalazioa hainbat CD-ROMetan banatuta dago. DrakXk badaki\n"
-"hautatako pakete bat beste CD-ROM batean kokatuta dagoen edo ez, eta uneko\n"
-"CDa atera eta beste bat sartzeko eskatuko dizu behar izan ahala."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Goiko zerrendan zure disko gogorrean detektatutako Linux partizioak daude.\n"
-"Morroiak egindako aukerak manten ditzakezu, egokiak dira instalazio\n"
-"ohikoenetarako. Aldaketarik egiten baduzu, gutxienez erroko partizio bat\n"
-"(\"/\") definitu behar duzu. Ez aukeratu partizio txikiegirik edo ezin\n"
-"izango duzu nahikoa software instalatu. Datuak beste partizio batean\n"
-"biltegiratu nahi badituzu, \"/home\"-rentzako partizio bat ere sortu\n"
-"beharko duzu (Linux partizio bat baino gehiago baduzu soilik da posible).\n"
-"\n"
-"Partizio bakoitza honela zerrendatzen da: \"Izena\", \"Edukiera\".\n"
-"\n"
-"\"Izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko\n"
-"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" izango da disko gogorra IDE disko gogorra\n"
-"bada, eta \"sd\", SCSI unitatea bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\" ren ondoko letra bat\n"
-"izaten da. IDE disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du;\n"
-"\n"
-" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi\n"
-"du;\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi\n"
-"du;\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi\n"
-"du;\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
-"letrak \"bigarren SCSI ID baxuena\", etab."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux erabiltzaile anitzeko sistema da, eta horrek esan nahi du\n"
-"erabiltzaile bakoitzak bere hobespenak eta bere fitxategiak eduki\n"
-"ditzakeela. Gehiago jakiteko, irakurri ``Erabiltzailearen gida''. Baina\n"
-"administratzailea den \"root\"-ak ez bezala, hemen gehitutako\n"
-"erabiltzaileek debekatuta izango dute ezer aldatzea euren fitxategiak eta\n"
-"konfigurazioa izan ezik. Zuretzat erabiltzaile arrunt bat behintzat sortu\n"
-"beharko duzu. Eta kontu hori erabili beharko zenuke eguneroko lanak\n"
-"egiteko. Egunero \"root\" gisa saioa hastea oso erosoa den arren, oso\n"
-"arriskutsua ere izan daiteke! Hutsegiterik txikienak sistema funtzionatu\n"
-"ezinda utz dezake. Erabiltzaile arrunt gisa hutsegite larri bat egiten\n"
-"baduzu, informazioren bat gal dezakezu, baina ez sistema osoa.\n"
-"\n"
-"Lehendabizi, zure benetako izena idatzi behar duzu. Hori ez da\n"
-"derrigorrezkoa noski - berez, nahi duzun izena eman baitezakezu. DrakXk\n"
-"gero zuk koadroan idatzitako lehen hitza hartuko du eta hori izango da\n"
-"\"Erabiltzaile-izena\". Hori izango da erabiltzaile jakin horrek sisteman\n"
-"saioa hasteko erabiliko duen izena. Alda dezakezu. Gero pasahitz bat sartu\n"
-"behar duzu hemen. Pribilegio gabeko erabiltzailearen (erabiltzaile\n"
-"arruntaren) pasahitza ez da \"root\"-arena bezain funtsezkoa segurtasunaren\n"
-"aldetik, baina ez da horregatik arduragabekeriaz jokatu behar: izan ere,\n"
-"zure fitxategiak baitaude arriskuan.\n"
-"\n"
-"\"Onartu erabiltzailea\"n klik eginez gero, nahi adina erabiltzaile gehi\n"
-"ditzakezu. Gehitu erabiltzaile bat zure lagun bakoitzeko: zure ama edo\n"
-"anaia, esate baterako. Nahi dituzun erabiltzaile guztiak gehitu ondoren,\n"
-"hautatu \"Eginda\".\n"
-"\n"
-"\"Aurreratua\" botoian klik egitean, erabiltzaile horrentzat lehenetsitako\n"
-"\"shell\"-a aldatu ahal izango duzu (bash da lehenetsia)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Aurrera jarraitu aurretik, arretaz irakurri lizentziaren baldintzak.\n"
-"Mandrake Linux banaketa osoari dagozkio eta baldintza guztiekin ados ez\n"
-"bazaude, egin klik \"Ezetsi\" botoian; horrela berehala amaituko da\n"
-"instalazioa. Instalazioarekin aurrera jarraitzeko, egin klik \"Onartu\"\n"
-"botoian."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "%s ere formateatu behar duzu"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ezin dira zure kernelari dagozkion kernel moduluak atzitu (%s fitxategia "
-"falta da), honek orokorrean esan nahi du zure abiapen disketea ez dagoela "
-"instalazio euskarriarekin sinkronizatuta (mesedez sortu abiapen diskete "
-"berria)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Errorea gertatu da - ez da fitxategi-sistema berriak sortzeko gailu "
-"baliozkorik aurkitu. Aztertu zure hardwarea arazo honen arrazoia bilatzeko"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errorea %s fitxategia irakurtzean"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Gordetako pakete-hautapen hau erabiltzeko, abiarazi instalazioa ``linux "
-"defcfg=floppy''rekin"
+msgid "Wizard Configuration"
+msgstr "Morroiaren konfigurazioa"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Diskete honek ez du FAT formaturik"
+msgid "Autoprobe"
+msgstr "Autoproba"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sartu FAT formatuko diskete bat %s unitatean"
+msgid "Backup system files..."
+msgstr "Sistema-fitxategien babeskopia"
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Ezin da difusioa erabili NIS domeinurik gabe"
-#: ../../install_any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Ondorengo paketeak zure sistema eguneratu ahal izateko ezabatuko dira: %s\n"
-"\n"
-"\n"
-"Pakete hauek ezabatu nahi dituzu?\n"
+msgid "Removing printer \"%s\"..."
+msgstr "\"%s\" inprimagailua ezabatzen..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "No"
-msgstr "Ez"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Yes"
-msgstr "Bai"
-
-#: ../../install_any.pm:1
-#, fuzzy, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Zerbitzari hau(ek) hautatu d(it)uzu: %s\n"
-"\n"
-"\n"
-"Zerbitzari horiek lehenespenez aktibatzen dira. Ez dute segurtasun-arazo "
-"ezagunik,\n"
-"baina berriren bat ager liteke. Kasu horretan, ziurtatu ahal bezain laster\n"
-"eguneratzen duzula.\n"
-"\n"
-"\n"
-"Zerbitzari horiek benetan instalatu nahi dituzu?\n"
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "CUPSen konfigurazioa"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO instalazioa"
-
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Sarea ixten"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Sarea irekitzen"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizioak huts egin du: %s"
+msgid " on device: %s"
+msgstr " gailuan: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Partizio-morroiak irtenbide hauek aurkitu ditu:"
+msgid "Remove Windows(TM)"
+msgstr "Kendu Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ezin dut instalatzeko lekurik aurkitu"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"X letra-tipoen zerbitzaria abiarazten du (nahitaezkoa da XFree-k\n"
+"funtzionatu ahal izan dezan.)."
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Orain egin dezakezu %s partizioa.\n"
-"Egin ondoren, ez ahaztu `w' erabiliz gordetzea"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Erabili fdisk"
+"Balio hauetako gehienak martxan duzun sistematik\n"
+"hartu dira. Behar bezala aldatu ditzakezu."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Disko-partizio pertsonalizatua"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
+"Hautatu letra-tipoen fitxategia edo direktorioa eta egin klik 'Gehitu'n"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s unitatean dauden partizio eta datu GUZTIAK galdu egingo dira"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Disko gogor bat baino gehiago duzu, zeinetan instalatuko duzu linux?"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Ezabatu disko osoa"
+msgid "Cron not available yet as non-root"
+msgstr "Cron ezin du oraindik erabili root-ek ez bestek"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Kendu Windows(TM)"
+msgid "System"
+msgstr "Sistema"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "Do you want to use this feature?"
+msgstr "aboot erabili nahi duzu?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
msgstr ""
-"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
-"erabiltzeko (edo ez dago nahikoa leku)"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
+"\n"
+"- Aukerak:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT tamaina-aldaketak huts egin du: %s"
+msgid "Password required"
+msgstr "Pasahitza behar da"
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Windows fitxategi-sistemaren mugak kalkulatzen"
+msgid "%d minutes"
+msgstr "%d minutu"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Tamaina aldatzen"
+msgid "Graphics card: %s"
+msgstr "Txartel grafikoa: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "partition %s"
-msgstr "%s partizioan"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV transferentziak hutsegin du!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Zein tamaina utzi nahi duzu Windows-entzat"
+msgid "XFree configuration"
+msgstr "XFree konfigurazioa"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"KONTUZ!\n"
-"\n"
-"DrakX Windows partizioari tamaina aldatzera doa. Kontuz ibili:\n"
-"eragiketa hau arriskutsua da. Inoiz ez baduzu horrelakorik egin, \n"
-"hobe izango duzu instalaziotik irten eta scandisk exekutatzea \n"
-"Windows-en (eta nahi izanez gero defrag); gero, hasi berriro \n"
-"instalazioarekin. Datuen babeskopia egitea ere komeni da.\n"
-"Ziur zaudenean, sakatu Ados."
+msgid "Choose action"
+msgstr "Aukeratu ekintza"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Zure Windows partizioa fragmentatuegia dago, exekutatu ``defrag'' lehendabizi"
+msgid "French Polynesia"
+msgstr "Polinesia frantsesa"
-#: ../../install_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Erabili Windows-en partizioko leku librea"
-
-#: ../../install_interactive.pm:1
-#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"FAT tamaina-aldatzaileak ezin du zure partizioa maneiatu, \n"
-"errore hau gertatu da: %s"
+"DrakXk normalean detektatzen du saguak zenbat botoi dituen. Detektatu ezin\n"
+"badu, bi botoiko sagua duzula suposatuko du, eta hirugarren botoia emula\n"
+"dezan konfiguratuko du. DrakXk automatikoki jakingo du sagua PS/2, seriekoa\n"
+"edo USB motakoa den.\n"
+"\n"
+"Beste mota bateko sagua zehaztu nahi baduzu, hautatu dagokion mota\n"
+"zerrendan.\n"
+"\n"
+"Lehenetsitakoa ez den sagu aukeratzen baduzu, probako pantaila bat azalduko\n"
+"da. Erabili botoiak eta gurpila ezarpenak egokiak direla egiaztatzeko.\n"
+"Saguak ez badu behar bezala funtzionatzen, sakatu zuriune-barra edo\n"
+"[Itzuli], bertan behera \"Utzi\" eta berriro aukeratzeko."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Zein partiziori aldatu nahi diozu tamaina?"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Onartu OKI 4w eta winprinter bateragarriak."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Erabili Windows-en partizioko leku librea"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
-"erabiltzeko (edo ez dago nahikoa leku)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Abiarazi ALSA (Advanced Linux Sound Architecture) soinu-sistema"
-#: ../../install_interactive.pm:1
+# #this syntax doesn't work yet in perl :-(
+# #msgid "Installing driver for %s card %s"
+# #msgstr "%2$s %1$s txartelaren kontrolatzailea instalatzen"
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap partizioaren tamaina MBtan: "
+msgid "Installing driver for %s card %s"
+msgstr "%s %s txartelaren kontrolatzailea instalatzen"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Erroko partizioaren tamaina MBtan: "
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Zure lehengo inprimagailu lehenetsia (\"%s\") transferitu duzu, Inprimagailu "
+"lehenetsia izan behar du %s inprimatze-sistema berrian ere?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Aukeratu tamainak"
+msgid "Enable Server"
+msgstr "Gaitu Zerbitzaria"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Zein partizio erabili nahi duzu Linux4Win-erako?"
+msgid "Ukrainian"
+msgstr "Ukrainarra"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Erabili Windows partizioa atzera-begiztarako"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Sarerako sarbidea ez dago martxan eta ezin da abiarazi. Begiratu "
+"konfigurazioa eta hardwarea ondo dauden. Gero saiatu berriro urruneko "
+"inprimagailua konfiguratzen."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Ez dago erabiltzeko moduko partiziorik"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Sartu abioko disketea %s unitatean"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use existing partitions"
-msgstr "Lehendik dagoen partizioa erabili"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "Bertako Sare helbidea"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ez dago partizio berriak esleitzeko adina leku"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Kendu Windows(TM)"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "Erabili leku librea"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Zure %s eskanerra konfiguratu da.\n"
+"Dokumentuak eskaneatu ditzakezu orain aplikazio menuan Multimedia/Grafikoak "
+"barruan \"XSane\" erabiliz."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "FAT partizio bat eduki behar duzu /boot/efi-n muntatuta"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Ez duzu swap partiziorik\n"
+"LILO (LInux LOader) eta grub abioko kargatzaileak dira: GNU/Linux edo\n"
+"ordenagailuan dagoen beste edozein sistema eragile abiaraz dezakete.\n"
+"Normalean, beste sistema eragile horiek ongi detektatu eta instalatzen\n"
+"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi dezakezu.\n"
+"Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
"\n"
-"Jarraitu hala ere?"
+"Beharbada, ez duzu nahiko beste sistema eragile horietan inor sartzerik.\n"
+"Horrela bada, sistema eragile horien sarrerak ezaba ditzakezu. Baina gero,\n"
+"abioko disko bat beharko duzu beste sistema eragile horiek abiarazteko!"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Erroko partizioa eduki behar duzu.\n"
-"Horretarako, sortu partizio bat (edo egin klik lehendik dagoen batean).\n"
-"Gero aukeratu ``Muntatze-puntua'' ekintza eta ezarri `/'"
+msgid "System mode"
+msgstr "Sistema modua"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Zure ordenagailuko hardware batzuek kontrolatzaile ``jabea'' behar dute.\n"
-"Horiei buruzko informazioa hemen aurki dezakezu: %s"
+"NetWare inprimagailuan inprimatzeko, NetWare inprimaketa-zerbitzariaren "
+"izena eman behar duzu (Oharra! baliteke bere TCP/IP ostalari-izena "
+"desberdina izatea!) eta baita atzitu nahi duzun inprimagailuaren inprimaketa-"
+"ilararen izena eta erabiltzaile-izenak eta pasahitzak ere."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Sare-maskara"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Append"
+msgstr "Erantsi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"%s\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-"Zorionak, instalazioa burutu da.\n"
-"Atera abioko diskoa eta sakatu itzulera-tekla berrabiarazteko.\n"
-"\n"
-"\n"
-"Mandrake Linux-en bertsio honetarako erabilgarri dauden konponbideen "
-"informaziorako,\n"
-"kontsultatu Erratak helbide honetan:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Zure sistema konfiguratzeko informazioa Mandrake-ren Erabiltzailearen \n"
-"Gida Ofizialeko instalatu ondorengo azalpenei buruzko kapituluan duzu."
-#: ../../install_messages.pm:1
-#, fuzzy, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
-
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
+"OSS (Open Sound System) izan zen lehenengo soinu API. Soinu API hau ez da SE-"
+"aren menpekoa (unix sistema gehienetan eskuragarri dago) baino oso API xume "
+"eta mugatua da.\n"
+"Gainera, OSS gidari guztiek gurpila berrasmatzen dute.\n"
"\n"
-"Abisua\n"
-"\n"
-"Irakurri arretaz ondorengo baldintzak. Zerbaitekin ados ez bazaude,\n"
-"ez duzu hurrengo CDa instalatzeko baimenik. Sakatu 'Ezetsi' \n"
-"instalazioa euskarri horiek erabili gabe jarraitzeko.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagai batzuk ez dira GPL Lizentziaren edo\n"
-"antzeko akordioen araberakoak. Osagai horietako bakoitza\n"
-"bere lizentzia zehatzaren baldintzen araberakoa da. \n"
-"Irakurri arretaz lizentzia horiek eta bete bertako baldintzak osagai \n"
-"horiek erabili edo birbanatu aurretik. \n"
-"Lizentzia horiek oro har osagaia transferitzea, bikoiztea (babeskopiak\n"
-"egiteko izan ezik), birbanatzea, ingeniaritza alderantzikatzea, \n"
-"desmihiztatzea, deskonpilatzea edo aldatzea eragotziko dute. \n"
-"Kontratua ez betetzeak lizentzia zehatzak ematen dituen eskubide guztiak \n"
-"kentzea ekarriko du berehala. Baldin eta lizentzia zehatzaren baldintzek "
-"eskubidea ematen\n"
-"ez badizute, normalki ezin izango dituzu programak sistema batean baino\n"
-"gehiagotan instalatu, edo sarean erabiltzeko egokitu. Zalantzarik baduzu, "
-"jarri harremanetan\n"
-"osagaiaren banatzailearekin edo editorearekin zuzenean. \n"
-"Osagai horiek hirugarrenei transferitzea edo kopiatzea, dokumentazioa\n"
-"barne, debekatuta egoten da normalki.\n"
+"ALSA (Advanced Linux Sound Architecture) arkitektura modularra da, \n"
+"ISA, USB eta PCI txartel multzo zabalari euskarri ematen diona.\n"
"\n"
+"Askogatik OSS-k baino maila handiagoko API hornitzen du.\n"
"\n"
-"Hurrengo CDko osagaiei dagozkien eskubide guztiak haien egileenak \n"
-"dira eta software-programei aplikatzen zaizkien jabetza \n"
-"intelektualaren eta copyright-aren legeek babesten dituzte.\n"
+"ALSA erabiltzeko, batek bitako edozein erabil dezake:\n"
+"- OSS-rekin bateragarri den api zaharra.\n"
+"- Ezaugarri hedatu ugari eskaintzen dituen ALSA api berria, ALSA liburutegia "
+"erabili behar da.\n"
-#: ../../install_messages.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"You may prefer to replay the installation.\n"
msgstr ""
-"Sarrera\n"
-"\n"
-"Mandrake Linux banaketako sistema eragileari eta erabilgarri dauden osagaiei "
-"\"Software-produktuak\"\n"
-"deituko zaie aurrerantzean. Software-produktuetan sartzen dira, besteak \n"
-"beste, Mandrake Linux banaketako sistema eragileari eta osagaiei dagozkien "
-"programak, \n"
-"metodoak, arauak eta dokumentazioa.\n"
-"\n"
-"\n"
-"1. Lizentzia-kontratua\n"
-"\n"
-"Irakurri arretaz dokumentu hau. Dokumentu hau zure eta MandrakeSoft S.A.ren "
-"arteko lizentzia-kontratu bat da,\n"
-"Software-produktuei dagokiena.\n"
-"Software-produktuak instalatu, bikoiztu edo era batean edo bestean erabiliz, "
-"esplizituki \n"
-"onartzen dituzu eta erabateko adostasuna adierazten diezu Lizentzia honen "
-"baldintzei. \n"
-"Lizentziaren zatiren batekin ados ez bazaude, ez duzu baimenik izango "
-"Software-produktuak instalatu, \n"
-"bikoiztu edo erabiltzeko. \n"
-"Software-produktuak Lizentzia honekin bat ez datorren moduan instalatu, "
-"bikoiztu edo erabiltzeko \n"
-"saio oro deuseza izango da eta Lizentziari dagozkion eskubideak amaitu "
-"egingo \n"
-"dira. Lizentzia amaitzean, Software-produktuen kopia guztiak berehala "
-"suntsitu \n"
-"behar dituzu.\n"
-"\n"
-"\n"
-"2. Berme mugatua\n"
-"\n"
-"Software-produktuak eta erantsitako dokumentuak \"dauden-daudenean\" ematen "
-"dira, bermerik gabe, \n"
-"legeak onartzen duen neurrian.\n"
-"MandrakeSoft S.A.k ez du, ezein kasutan eta legeak onartzen duen neurrian, "
-"erantzukizunik izango\n"
-"Software-produktuen erabileraren edo erabiltzeko ezgaitasunaren ondorioz "
-"sortutako kalte berezi, ustekabeko,\n"
-"zuzeneko edo zeharkakoengatik (lana galtzea, lana etetea, finantza-galera, "
-"epai baten ondorioz ordaindu \n"
-"beharreko kuotak eta zigorrak edo beste edozein ondoriozko galera barne, "
-"mugarik gabe), \n"
-"MandrakeSoft S.A. jakinaren gainean egon arren halako kalteak gerta "
-"litezkeela.\n"
-"\n"
-"HERRIALDE BATZUETAN SOFTWARE DEBEKATUA EDUKITZEARI EDO ERABILTZEARI LOTUTAKO "
-"ERANTZUKIZUN MUGATUA\n"
-"\n"
-"Legeak onartzen duen neurrian, MandrakeSoft S.A.k edo bere banatzaileek, ez "
-"dute, ezein kasutan,\n"
-"erantzukizunik izango herrialde batzuetan, bertako legeek debekatutako edo "
-"mugatutako software-osagaiak edo\n"
-"Mandrake Linux-en guneetatik deskargatutako software-osagaiak eduki eta "
-"erabiltzearen ondorioz \n"
-"sortutako kalte berezi,ustekabeko,zuzeneko edo zeharkakoengatik (lana "
-"galtzea, lana etetea,\n"
-"finantza-galera, epai baten ondorioz ordaindu beharreko kuotak eta zigorrak "
-"edo beste edozein ondoriozko \n"
-"galera barne, mugarik gabe).\n"
-"Erantzukizun mugatu hau Software-produktuetan sartzen diren kriptografia "
-"handiko osagaiei aplikatzen \n"
-"zaie, baina ez da horietara mugatzen.\n"
-"\n"
-"\n"
-"3. GPL Lizentzia eta Lizentzia erlazionatuak\n"
-"\n"
-"Software-produktuak hainbat pertsonak edo erakundek sortutako osagaiak dira. "
-"Osagai \n"
-"horietako gehienak aurrerantzean\"GPL\" deituko diogun GNU Lizentzia Publiko "
-"Orokorraren\n"
-"edo antzeko lizentzien baldintzen araberakoak dira. Lizentzia horietako "
-"gehienek, \n"
-"beren osagaiak bikoizteko, egokitzeko edo birbanatzeko aukera ematen dute. "
-"Osagai bat erabili aurretik, irakurri \n"
-"arretaz osagai horren lizentzia-kontratuko baldintzak. Osagaiaren "
-"lizentziari\n"
-"buruzko galdera oro osagaiaren egileari egin beharko zaio, eta ez "
-"MandrakeSoft-i.\n"
-"MandrakeSoft S.A.k garatutako programak GPL Lizentziaren araberakoak dira. "
-"MandrakeSoft S.A.k\n"
-"idatzitako dokumentazioa lizentzia zehatz baten araberakoa da. Xehetasun "
-"gehiago nahi izanez gero, \n"
-"jo dokumentaziora.\n"
-"\n"
-"\n"
-"4. Jabetza intelektualaren eskubideak\n"
-"\n"
-"Software-produktuen osagaiei dagozkien eskubide guztiak haien \n"
-"egileenak dira eta software-programei\n"
-"aplikatzen zaizkien jabetza intelektualaren eta copyriht-aren legeek "
-"babesten dituzte.\n"
-"MandrakeSoft S.A.k eskubidea du Software-produktuak bere osotasunean edo "
-"zatika aldatzeko, \n"
-"bide guztiak erabiliz eta helburu guztietarako.\n"
-"\"Mandrake\", \"Mandrake Linux\" eta asoziatutako logotipoak MandrakeSoft S."
-"A.ren marka erregistratuak dira \n"
-"\n"
-"\n"
-"5. Lege arautzaileak \n"
+"Auto-instalazioa erabat automatiza daiteke nahi izanez gero,\n"
+"kasu horretan, disko gogorra hartuko du!!\n"
+"(beste makina batean instalatzeko pentsatua da aukera hau).\n"
"\n"
-"Kontratu honen edozein zati epai batek deuseztzat, legez kanpokotzat edo "
-"aplikaezintzat jotzen badu, \n"
-"zati hori kendu egingo da kontratutik. Kontratuaren gainerako atal "
-"aplikagarriek ezarritakoa \n"
-"bete behar duzu.\n"
-"Lizentzia honetako baldintzak Frantziako legeen araberakoak dira.\n"
+"Beharbada nahiago izango duzu instalazioa errepikatzea.\n"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' urratsean sartzen\n"
+msgid "Network printer \"%s\", port %s"
+msgstr "\"%s\" sareko inprimagailua, %s portua"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Help"
-msgstr "Laguntza"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Aukeratu zein sare-moldagailu konektatuko den zure sare lokalarekin."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "birkonfiguratu"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "OK to restore the other files."
+msgstr "Ados, leheneratu beste fitxategiak"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configure"
-msgstr "Konfiguratu"
+msgid "Please choose your keyboard layout."
+msgstr "Aukeratu zure teklatu-diseinua."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Jarraitu hala ere?"
+msgid "Printer Device URI"
+msgstr "Inprimagailuaren URIa"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Errore bat izan da paketeak instalatzean:"
+msgid "Not erasable media!"
+msgstr "Ez da euskarri ezabagarria!"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Errore bat izan da paketeak ordenatzean:"
+msgid "Terminal-based"
+msgstr "Terminalean oinarritua"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Installing a printing system in the %s security level"
+msgstr "Inprimatze-sisteman segurtasun-maila %s instalatzen"
+
+#: ../../any.pm:1
+#, c-format
+msgid "The user name is too long"
+msgstr "Erabiltzaile-izena luzeegia da"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (windows...)"
+msgstr "Beste SE bat (windows...)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV remote site already in sync!"
+msgstr "Urruneko WebDAV gunea dagoeneko sinkronizatuta!"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Reading printer database..."
+msgstr "Inprimagailuaren datu-basea irakurtzen..."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Generate auto install floppy"
+msgstr "Sortu auto-instalazioko disketea"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Aldatu CDROMa!\n"
-"\n"
-"Sartu \"%s\" etiketa duen CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi instalazioa CDROM horretatik egin ez dezan."
+"\t\t erabiltzaile-izena: %s\n"
+"\t\t bide-izena: %s \n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refuse"
-msgstr "Ezetsi"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "No open source driver"
+msgstr "Ez dago gidari ezagunik"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Accept"
-msgstr "Onartu"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Aurreko mailan oinarritua, baina sistema erabat itxita dago.\n"
+"Segurtasun-eginbideak maximoan jarrita daude."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing package %s"
-msgstr "%s paketea instalatzen"
+msgid "Nicaragua"
+msgstr "Nikaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d paketeak"
+msgid "New Caledonia"
+msgstr "Kaledonia berria"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Xehetasunak"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Europako protokoloa (EDSS1)"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Details"
-msgstr "Xehetasunak"
+msgid "Video mode"
+msgstr "Bideo modua"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Itxaron, instalazioa prestatzen"
+msgid "Please enter your email address below "
+msgstr "Mesedez sartu zure posta-e helbidea azpian "
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Geratzen den denbora "
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Sare-konfigurazioa"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Kalkulatzen"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instalatzen"
+msgid "New size in MB: "
+msgstr "Tamaina berria MBtan: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Aukeratu instalatu nahi dituzun paketeak"
+msgid "Partition table type: %s\n"
+msgstr "Partizio-taularen mota: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Gutxieneko instalazioa"
+msgid "Authentication Windows Domain"
+msgstr "windowsen Autentifikazio Domeinua"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Pakete-hautapena eguneratzen"
+msgid "US keyboard"
+msgstr "Estatu Batuetako teklatua"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Kargatu/Gorde disketean"
+msgid "Buttons emulation"
+msgstr "Botoien emulazioa"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Aurrekoa"
+msgid ", network printer \"%s\", port %s"
+msgstr ", \"%s\" sareko inprimagailua, %s portua"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalatu"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup ekintzak zinta bitartez:\n"
+"\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Erakutsi automatikoki hautatutako paketeak"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" FTP konexio-arazoa: zure babeskopien fitxategiak ezin izan dira bidali FTP "
+"bidez.\n"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ezin duzu pakete hau desautatu. Bertsio-berritu egin behar da"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Fitxategiak bidaltzen..."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+msgid "Halt bug"
msgstr ""
-"Pakete hau bertsio-berritu beharrean dago\n"
-"Ziur zaude desautatu nahi duzula?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ezin duzu pakete hau desautatu. Dagoeneko instalatuta dago"
+msgid "Mail alert configuration"
+msgstr "Posta alerta konfigurazioa"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Nahitaezko paketea da, ezin da desautatu"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Ezin duzu pakete hau hautatu/desautatu"
+msgid "Bosnian"
+msgstr "Bosniarra"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Ondorengo pakete hauek kenduko dira"
+msgid "Release: "
+msgstr "Bertsioa: "
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ondorengo pakete hauek instalatuko dira"
+msgid "Connection speed"
+msgstr "Konexioaren abiadura"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ezin duzu pakete hori hautatu: ez dago instalatzeko lekurik"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"Adierazi CD idazgailuaren gailu-izena \n"
+" adib.: 0,1,0"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Garrantzia: %s\n"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaina: %d KB\n"
+msgid "Database Server"
+msgstr "Datu-baseen zerbitzaria"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Bertsioa: %s\n"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Izena: %s\n"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Ezin zaio partizio bat gehitu RAID md%d-ri (formateatuta dago)"
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Pakete txarra"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake, baina XFree "
+"%s(r)ekin soilik,\n"
+"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
+"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
+"2Dan."
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Other"
-msgstr "Bestelakoa"
+msgid "Please wait, setting security options..."
+msgstr "Itxoin mesedez, segurtasun aukerak ezartzen..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Guztira: %d / %d MB"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Ezezaguna|CPH05X (bt878) [saltzaile ugari]"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Next ->"
-msgstr "Hurrengoa ->"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Abiarazi X-Window sistema hasieran"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Individual package selection"
-msgstr "Pakete indibidualen hautapena"
+msgid "hourly"
+msgstr "orduero"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Package Group Selection"
-msgstr "Pakete-taldearen hautapena"
+msgid " Successfuly Restored on %s "
+msgstr " behar bezala leheneratu dira hona: %s "
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Making printer port available for CUPS..."
msgstr ""
-"Sistemak baliabide gutxi ditu. Arazoak izan ditzakezu Mandrake \n"
-"Linux instalatzeko. Horrela bada, testu-instalazioa egiten saia zaitezke. "
-"Horretarako,\n"
-"sakatu `F1' CDROMetik abiaraztean, gero sartu `text'."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Gorde pakete-hautapena"
+msgid "Antigua and Barbuda"
+msgstr "Antigua eta Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Automated"
-msgstr "Automatizatua"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Replay"
-msgstr "Errepikatu"
+msgid "Spanish"
+msgstr "espainiarra"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "Start"
+msgstr "Hasi"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
+"Arguments: (arg)\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"Auto-instalazioa erabat automatiza daiteke nahi izanez gero,\n"
-"kasu horretan, disko gogorra hartuko du!!\n"
-"(beste makina batean instalatzeko pentsatua da aukera hau).\n"
-"\n"
-"Beharbada nahiago izango duzu instalazioa errepikatzea.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Sortu auto-instalazioko disketea"
+msgid "Configuring applications..."
+msgstr "Aplikazioak konfiguratzen..."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Normal modem connection"
+msgstr "Modem-konexio normala"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "File Selection"
+msgstr "Fitxategi-hautapena"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
+"Which ISDN configuration do you prefer?\n"
"\n"
-"Do you really want to quit now?"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Urrats batzuk ez dira osatu.\n"
+"Zein ISDN konfigurazio duzu nahiago?\n"
"\n"
-"Ziur zaude orain irten nahi duzula?"
+"* Konfigurazio zaharrak isdn4net erabiltzen du. Tresna ahaltsuak\n"
+" dauzka, baina korapilatsua da konfiguratzeko, eta ez da estandarra.\n"
+"\n"
+"* Konfigurazio berria errazagoa da ulertzeko, estandarragoa,\n"
+" baina tresna gutxiago ditu.\n"
+"\n"
+"Konfigurazio erraza gomendatzen dugu.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Auto-instalazioko disketea sortzen..."
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sartu diskete huts bat %s unitatean"
+msgid "Run config tool"
+msgstr "Exekutatu ezarpen tresna"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Baliteke Open Firmware abioko gailua aldatu behar izatea\n"
-" abioko kargatzailea gaitzeko. Berrabiaraztean abioko kargatzailearen "
-"gonbita ez\n"
-" baduzu ikusten, eduki sakatuta Command-Option-O-F abiaraztean eta sartu:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Gero, idatzi: shut-down\n"
-"Hurrengo abiaraztean abioko kargatzailearen gonbita ikusi behar duzu."
+msgid "Bootloader installation"
+msgstr "Abioko kargatzailearen instalazioa"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Abioko kargatzailea instalatzeak huts egin du. Errore hau gertatu da:"
+msgid "Root partition size in MB: "
+msgstr "Erroko partizioaren tamaina MBtan: "
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Abioko kargatzailea instalatzen"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Nahitaezko paketea da, ezin da desautatu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errorea aboot instalatzean, \n"
-"instalazioa ezartzen saiatu lehen partizioa suntsitzen badu ere?"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO irudia %s da"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "aboot erabili nahi duzu?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
msgstr ""
-"Badirudi makina zaharra edo ezezaguna duzula,\n"
-"yaboot abioko kargatzaileak ez du funtzionatuko.\n"
-"Instalazioak jarraitu egingo du, baina\n"
-"BootX erabili beharko duzu makina abiarazteko"
+"named (BIND) domeinu-izenen zerbitzari bat (DNS) da, ostalari-izenak ebatzi "
+"eta IP helbide bihurtzeko erabiltzen dena."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Abioko kargatzailea prestatzen"
+msgid "Disconnect..."
+msgstr "Deskonektatu..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Domeinuko Admin Pasahitza"
+msgid "Saint Lucia"
+msgstr "Santa Luzia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Domeinuaren Admin Erabiltzaile Izena"
+msgid "Report"
+msgstr "Txostena"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows Domeinua"
+msgid "Palau"
+msgstr "Palau"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "windowsen Autentifikazio Domeinua"
+msgid "level"
+msgstr "maila"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Honek W2K Domeinuko Kontrolatzaile Nagusi (PDC) batekin lanegin dezan, "
-"seguraski zure administratzaileak C:\\>net localgroup \"Pre-Windows 2000 "
-"Compatible Access\" everyone /add exekutatu beharko du eta ondoren "
-"zerbitzaria berrabiatu.\n"
-"Era berean Domeinuko Admin baten erabiltzaile-izen/pasahitza beharko dituzu "
-"makina Windows(TM) domeinura batzeko.\n"
-"Sarea oraindik gaitu gabe badago, Drakx saiatuko da domeinura batzen sareko "
-"ezarpen urratsaren ondoren.\n"
-"Ezarpen honek, edozein arrazoi medio, hutsegingo balu eta domeinu "
-"autentifikazioa ez badabil, exekutatu 'smbpasswd -j DOMEINUA -U ERABILTZAILEA"
-"%PASAHITZA' zure Windows(tm) Domeinua, eta Admin Erabiltzaile-izen/Pasahitza "
-"erabiliz, sistema abiatu ondoren.\n"
-"'wbinfo -t' komandoak autentifikazioaren sekretuak zuzenak diren frogatuko "
-"du."
+"Gertaera guztiek MandrakeSoften Aditu tekniko kualifikatu bakarraren "
+"jarraipena izango dute."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS zerbitzaria"
+msgid "Package Group Selection"
+msgstr "Pakete-taldearen hautapena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS domeinua"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Leheneratu Sareko Protokolo honen bitartez: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "NIS Autentifikazioa"
+msgid "You can configure each parameter of the module here."
+msgstr "Moduluaren parametro bakoitza konfiguratu dezakezu hemen."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Choose the resolution and the color depth"
+msgstr "Aukeratu bereizmena eta kolorearen sakonera"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Zerbitzaria"
+msgid "Emulate third button?"
+msgstr "Hirugarren botoia emulatu?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP basea dn"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Ezin duzu partizio berria sortu\n"
+"(izan daitezkeen partizio primario kopuru handiena duzulako).\n"
+"Lehenik ezabatu partizio primario bat eta sortu partizio hedatu bat."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP autentifikazioa"
+msgid "Mount"
+msgstr "Muntatu"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Creating auto install floppy"
+msgstr "Auto-instalazioko disketea sortzen"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Local files"
-msgstr "Fitxategi lokalak"
+msgid "Install updates"
+msgstr "Sistema-eguneratzeak"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Authentication"
-msgstr "Autentifikazioa"
+msgid "text box height"
+msgstr "testu-lauki garaiera"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Pasahitz hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
+msgid "State"
+msgstr "Egoera"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "No password"
-msgstr "Pasahitzik ez"
+msgid "Be sure a media is present for the device %s"
+msgstr "Egiaztatu %s gailuak euskarria baduela"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Ezarri root-aren pasahitza"
+msgid "Enable multiple profiles"
+msgstr "Gaitu profil anitzak"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
+"Aukera horiek /etc direktorioko fitxategi guztiak kopiatu eta leheneratu "
+"ditzakete.\n"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Zerbitzuak: %d aktibatuta / %d erregistratuta"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Services"
-msgstr "Zerbitzuak"
+msgid "Local printer"
+msgstr "Inprimagailu lokala"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "System"
-msgstr "Sistema"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Ataka"
+msgid "Files Restored..."
+msgstr "Fitxategiak Leheneratuta..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Abioko kargatzailea"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "desgaitu"
+msgid "Package selection"
+msgstr "Pakete-hautapena"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "aktibatu orain"
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr "Mauritania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Suebakia/Bidatzailea"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"Uneko konfigurazioa gorde eta DHCP zerbitzari bat konfiguratuta duzula jo "
+"dezaket; hala bada, ziurtatu ondo irakurri dudala zure bertoko sare bezala "
+"erabiltzen duzun sarea; ez dut birkonfiguratuko ez eta zure DHCP "
+"zerbitzariaren konfigurazioa ukituko.\n"
+"\n"
+"Jatorrian DNS sarrera suhesian konfiguratuta dagoen IzenZerbitzari "
+"Katxeatzailea da. Hura ordezkatu dezakezu zure ISP-aren DNS IP-arekin "
+"adibidez.\n"
+"\n"
+"Bestela, zure interfazea birkonfiguratu dezaket eta zure DHCP zerbitzaria "
+"zuretzako (bir)konfiguratu.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Security"
-msgstr "Segurtasuna"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Segurtasun-maila:"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Ez da inprimagailu lokalik aurkitu! Inprimagailua eskuz instalatzeko, idatzi/"
+"gailu/fitxategi izena (Ataka paraleloak: /dev/lp0, /dev/lp1, ..., "
+"baliokideak dira LPT1:, LPT2:..., lehen USB inprimagailua: /dev/usb/lp0, "
+"bigarren USB inprimagailua: /dev/usb/lp1, ...)."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network"
-msgstr "Sarea"
+msgid "All primary partitions are used"
+msgstr "Lehen mailako partizio guztiak erabilita daude"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Sare-interfazea"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Ondoren, zure X ingurunea berrabiaraztea gomendatzen dugu,\n"
+"ostalari-izena aldatzearen arazoa saihesteko."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X abioan"
+#: ../../services.pm:1
+#, c-format
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Hardwarea automatikoki detektatu eta konfiguratzea abioan."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Hardware"
-msgstr "HardDrake"
+msgid "Installation Server Configuration"
+msgstr "dhcpd Zerbitzari Konfigurazioa"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "Telebista-txartela"
+msgid "Configuring IDE"
+msgstr "IDE konfiguratzen"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Ez da soinu-txartelik detektatu. Instalazioa egin ondoren, saiatu \"harddrake"
-"\"rekin "
+msgid "Network functionality not configured"
+msgstr "Sare-funtzionalitatea ez dago konfiguratuta"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Instalazioa egindakoan, exekutatu \"sndconfig\" soinu-txartela "
-"konfiguratzeko "
+msgid "Configure module"
+msgstr "Konfiguratu modulua"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "ISA soinu-txartela duzu?"
+msgid "Cocos (Keeling) Islands"
+msgstr "Cocos Keeling uharteak"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Konektatu Internetekin"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound card"
-msgstr "Soinu-txartela"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Berrabiarazi egin beharko duzu aldaketek eragina izan dezaten"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Urruneko CUPS zerbitzaria"
+msgid "Provider phone number"
+msgstr "Hornitzailearen telefono-zenbakia"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Ostalari-izena"
+
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "Inprimagailurik ez"
+msgid "Armenia"
+msgstr "Armenia"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer"
-msgstr "Inprimagailua"
+msgid "Fiji"
+msgstr "Fiji"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Sagua"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Ordu-zona"
+msgid "Second floppy drive"
+msgstr "Bigarren diskete-unitatea"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Keyboard"
-msgstr "Teklatua"
+msgid "About Harddrake"
+msgstr "Harddrakeri buruz"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Summary"
-msgstr "Laburpena"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP Zerbitzaria"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Sartu diskete bat unitatean\n"
+"Disketeko datu guztiak galdu egingo dira"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Ordu-sinkronizazio automatikoa (NTP erabiliz)"
+msgid "Size: %s"
+msgstr "Tamaina: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarearen ordua GMTn ezarria"
+msgid "Control and Shift keys simultaneously"
+msgstr "Kontrol eta Maius teklak batera"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Zein da zure ordu-zona?"
+msgid "secondary"
+msgstr "bigarren mailakoa"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Inprimaketa konfiguratu nahi duzu?"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Backup Configuration."
+msgstr "Ikusi babeskopiaren konfigurazioa"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ezin da bikoiztu: %s"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Ispiluarekin kontaktatzen pakete erabilgarrien zerrenda lortzeko"
+msgid "No password"
+msgstr "Pasahitzik ez"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Aukeratu ispilu bat paketeak bertatik hartzeko"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Mandrake Linux-en web gunearekin kontaktatzen ispiluen zerrenda lortzeko"
+msgid "There is no existing partition to use"
+msgstr "Ez dago erabiltzeko moduko partiziorik"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The following scanners\n"
"\n"
-"Do you want to install the updates ?"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Orain, eguneratutako paketeak jaisteko aukera daukazu. Pakete hauek "
-"banaketa\n"
-"kaleratu ondoren kaleratu dira. Segurtasun edo akats konponketak izan "
-"ditzakete.\n"
"\n"
-"Pakete hauek jaisteko Internetera lotura beharko duzu\n"
-"\n"
-"Eguneratzeak instalatu nahi dituzu?"
+"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sartu moduluak eguneratzeko disketea %s unitatean"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"TCP edo Socket inprimagailu batera inprimatzeko, inprimagailuaren ostalari-"
+"izena edo IP eta, nahi baduzu, portu zenbakia (jatorrian 9100 da) eman behar "
+"dituzu. HP HP JetDirect zerbitzarietan portu-zenbakia normalki 9100 izaten "
+"da, beste zerbitzari batzuetan aldatu egin daiteke. Begiratu zure "
+"hardwarearen eskuliburuan."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sartu abioko disketea %s unitatean"
+msgid "Hard drive information"
+msgstr "Disko gogorraren informazioa"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Instalazio-ondorengo konfigurazioa"
+msgid "Russian"
+msgstr "errusiarra"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketea instalatzen\n"
-"%% %d"
+msgid "Jordan"
+msgstr "Jordania"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Instalazioa prestatzen"
+msgid "Hide files"
+msgstr "Ezkutatu fitxategiak"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" etiketadun CDROMa"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Auto-detektatu makina honetara lotutako inprimagailuak"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-"Beheko zerrendako CD guztiak badituzu, sakatu Ados.\n"
-"CD horietako bat ere ez baduzu, sakatu Utzi.\n"
-"CDetako batzuk soilik falta badituzu, desauta itzazu, eta sakatu Ados."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Denak"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalazio minimo-minimoa (batez ere, urpmi gabe)"
+"XawTV ez dago instalatuta!\n"
+"\n"
+"\n"
+"TB txartela badaukazu baino DrakX-ek ez badudu detektatu (bttv edo saa7134 "
+"modulurik ez\n"
+"\"/etc/modules\" kokapenean) ez eta xawtv instalatu ere, mesedez bidali\n"
+"\"lspcidrake -v -f\"-ek sortzen duen irteera \"install\\@mandrakesoft.com\"\n"
+"helbidera gai bezala \"undetected TV card\" jarrita.\n"
+"\n"
+"\n"
+"XawTV instalatu dezakezu kontsolatik root bezala \"urpmi xawtv\" idatzita."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Oinarrizko dokumentazioarekin (gomendatua)"
+msgid "Sorry, no floppy drive available"
+msgstr "Ez dago diskete-unitate erabilgarririk"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With X"
-msgstr "Xrekin"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-"Ez duzu talde edo paketerik hautatuta\n"
-"Nahi duzun gutxieneko instalazioa hautatu behar duzu"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Type of install"
-msgstr "Instalazio-mota"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Hautatutako tamaina handiagoa da leku erabilgarria baino"
+"Ezarri zure Windows zerbitzaria, inprimagailua IPP protokoloarekin "
+"eskuragarri egon dadin eta ezarri inprimaketa, makina honetatik, \"%s\" "
+"lotura mota erabilizPrinterdrake-n.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Sartu pakete-hautapena daukan diskete bat"
+msgid "Bad package"
+msgstr "Pakete txarra"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Disketetik kargatzen"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Bihur ezazu zure makina zerbitzari ahaltsu, saguaren klik gutxi batzuk "
+"eginez: Web zerbitzaria, posta, suhesia, routerra, fitxategi eta inprimaketa "
+"zerbitzaria, ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Pakete-hautapena"
+msgid "DrakSec Basic Options"
+msgstr "DrakSec Oinarrizko Aukerak"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Save on floppy"
-msgstr "Gorde disketean"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Adi: ISA PnP soinu txartela badaukazu, sndconfig programa erabili beharko "
+"duzu. Idatzi \"sndconfig\" kontsola batean."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Disketetik kargatu"
+msgid "Romania"
+msgstr "Errumania"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Aukeratu pakete-hautapena disketean kargatzea edo gordetzea.\n"
-"Formatua instalazio automatikoa egiteko sortutako disketeena bezalakoa da."
+msgid "choose device"
+msgstr "Aukeratu gailua"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Zure sistemak ez du nahikoa leku instalatzeko edo bertsio-berritzeko (%d > %"
-"d)"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Pakete erabilgarriak bilatzen"
+msgid "Remove from LVM"
+msgstr "Kendu LVMtik"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Bertsio-berritzeko paketeak bilatzen"
+msgid "Timezone"
+msgstr "Ordu-zona"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Instalatutako paketeen artean bilatzen..."
+msgid "German"
+msgstr "alemana"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Pakete erabilgarriak bilatzen eta rpm databaseak berreraikitzen..."
+msgid "Next ->"
+msgstr "Hurrengoa ->"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ez dago nahikoa swap instalazioa burutzeko, gehitu egin beharko duzu"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"%s fitxategi-sistemaren egiaztapenak hutsegin du. Okerrak zuzendu nahi "
-"dituzu? (adi, datuak gal ditzakezu)"
+"\n"
+"Partizio hau kontrolatzailearen \n"
+"partizioa izan daiteke, hobe duzu\n"
+"bere horretan uztea.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "Bloke txarrak egiaztatu?"
+msgid "Guinea-Bissau"
+msgstr "Ginea Bissau"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Aukeratu formateatu nahi dituzun partizioak"
+msgid "Horizontal refresh rate"
+msgstr "Freskatze-maiztasun horizontala"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Berrabiarazi egin behar duzu partizio-taulako aldaketek eragina izateko"
+"Ezin da muntatze-puntuaren ezarpena kendu, partizio hau atzera-begiztarako "
+"erabiltzen delako\n"
+"Kendu atzera-begizta lehendabizi"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Ez dago lekurik 1 MBko bootstrap-a sortzeko! Instalazioak jarraituko du, "
-"baina zure sistema abiarazteko, bootstrap partizioa sortu beharko duzu "
-"DiskDrake-rekin"
+"Instalazioan egindako sare-konfigurazioa ezin da abiarazi orain. "
+"Berrabiarazi sistema eta begiratu ea sarean sartzen zaren eta, ondoren, "
+"zuzendu konfigurazioa Mandrake Kontrol Zentroko \"Sarea eta Internet\"/"
+"\"Konexioa\" atalean, eta gero konfiguratu inprimagailua, Mandrake Kontrol "
+"Zentroan bertan, \"Hardwarea\"/\"Inprimagailua\" atalean."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Aukeratu muntatze-puntuak"
+msgid "USB controllers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Partizioak eskaneatzen muntatze-puntuak aurkitzeko"
+msgid "What norm is your TV using?"
+msgstr "Zein arau erabiltzen du zure TB?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No partition available"
-msgstr "ez dago partizio erabilgarririk"
+msgid "Type:"
+msgstr "Mota:"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "IDE konfiguratzen"
+msgid "Share name"
+msgstr "Konpartitze-izena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "enable"
+msgstr "gaitu"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA txartelak konfiguratzen..."
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Mandrake Linux-en web gunearekin kontaktatzen ispiluen zerrenda lortzeko"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Arazo bat izan da sarea berrabiaraztean: \n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "3. botoiaren emulazioa"
+msgid "Remove the loopback file?"
+msgstr "Atzera-begiztako fitxategia kendu?"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "2. botoiaren emulazioa"
+msgid "Selected size is larger than available space"
+msgstr "Hautatutako tamaina handiagoa da leku erabilgarria baino"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "Botoien emulazioa"
+msgid "NCP server name missing!"
+msgstr "NCP zerbitzari-izena falta da!"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Aukeratu sagu-mota."
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "Sagu-ataka"
+msgid "Hard Disk Backup files..."
+msgstr "Disko gogorraren babeskopia fitxategiak... "
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Aukeratu sagu-mota."
+msgid "Laotian"
+msgstr "Laostarra"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Enkriptatze-gakoa"
+#: ../../lang.pm:1
+#, c-format
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Bertsio-berritu"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokoloari esker, sareko erabiltzaileek sare horretako \n"
+"edozein makinaren performantzia nolakoa den jakin dezakete."
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Zer egin nahi duzu: instalazioa ala eguneratzea?"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Instalatu/Eguneratu"
+msgid "Scanner"
+msgstr "Hautatu eskaner bat"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Adi: txartel grafiko hau frobatzeak zure konputagailua blokeatu dezake"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Erabiltzaile-izenak minuskulaz idatzitako letrak, zenbakiak, `-' eta `_' "
+"soilik izan ditzake"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Quit"
-msgstr "Irten"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Lizentzia-kontratua"
+msgid "Welcome To Crackers"
+msgstr "Ongi etorri Crackers-era"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Errore bat izan da"
+msgid "Module options:"
+msgstr "Modulu-aukerak:"
-#: ../../install_steps_newt.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-" <Tab>/<Alt-Tab> elem. aldatzeko | <Zuriunea> hautatzeko | <F12> hurr. pant. "
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux-en %s instalazioa"
+msgid "Go on without configuring the network"
+msgstr "Jarraitu sarea konfiguratu gabe"
-#: ../../install_steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
+msgid "Abort"
+msgstr "Abortatu"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Ongi etorri %s(e)ra"
+msgid "No password prompt on %s at port %s"
+msgstr "Pasahitz eskaririk ez %s-n %s portuan"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pakete garrantzitsu batzuk ez dira behar bezala instalatu.\n"
-"Zure CDROM unitateak edo CDROMak akatsak ditu.\n"
-"Probatu CDROMa ordenagailu instalatu batean \"rpm -qpl Mandrake/RPMS/*.rpm\" "
-"erabiliz.\n"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Mesedez markatu rebobinatzen ez den gailua erabiltzeko."
-#: ../../install_steps.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Erabili leku librea"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Bikoiztu %s muntatze-puntua"
+msgid "\t-CDROM.\n"
+msgstr "\t-CDROMa.\n"
-#: ../../install_steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
-"Errore bat gertatu da, baina ez dakit behar bezala maneiatzen.\n"
-"Jarraitu zure ardurapean."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Itxaron mesedez"
+"Zure Windows partizioa fragmentatuegia dago, exekutatu ``defrag'' lehendabizi"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ok"
-msgstr "Ados"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (norvegiarra)"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Finish"
-msgstr "Amaitu"
+msgid "Hard Disk Backup Progress..."
+msgstr "Disko gogorraren babeskopia egiten..."
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Basic"
-msgstr "Oinarrizkoa"
+msgid "Unable to fork: %s"
+msgstr "Ezin da bikoiztu: %s"
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Aurreratua"
+msgid "Type: "
+msgstr "Mota: "
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Kendu zerrenda"
+msgid "<-- Edit Client"
+msgstr "<-- Ezabatu Bezeroa"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Modify"
-msgstr "Aldatu"
+msgid "no fonts found"
+msgstr "ez da letra-tiporik aurkitu"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Add"
-msgstr "Gehitu"
+msgid "Mouse"
+msgstr "Sagua"
-#: ../../interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Aukeratu fitxategi bat"
+msgid "not enough room in /boot"
+msgstr "ez dago nahiko leku /boot-en"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+msgid "Choosing an arbitratry driver"
msgstr ""
-"Hemen aukeratu dezakezu zein tekla edo tekla konbinaziok\n"
-"egingo duen teklatu mota ezberdinen arteko konmutazioa\n"
-"(adib: latindarra eta ez latindarra)"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Eskuineko \"Windows\" tekla"
+msgid "Host name"
+msgstr "Ostalari-izena"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Ezkerreko \"Windows\" tekla"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" tekla"
+msgid "the color of the progress bar"
+msgstr "aurrerapen-barraren kolorea"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt eta Maius teklak batera"
+msgid "Suppress Fonts Files"
+msgstr "Ezabatu letra-tipoen fitxategiak"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ktrl eta Alt teklak batera"
+msgid "Add to RAID"
+msgstr "Gehitu RAIDi"
-#: ../../keyboard.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Sarrera gehiago erants ditzakezu yaboot-entzat, beste sistema eragile\n"
+"batzuk, nukleo alternatiboak edo emergentziazko abioko imajina gehitzeko.\n"
+"\n"
+"Beste SEentzat, etiketa eta \"erroko\" partizioa soilik da sarrera.\n"
+"\n"
+"Linux-entzat, hainbat aukera daude:\n"
+"\n"
+" * Etiketa: yaboot-en gonbitean idatzi beharko duzun izena da, abioko\n"
+"aukera hau hautatzeko;\n"
+"\n"
+" * Imajina: abiarazi beharreko nukleoaren izena izango da. Normalean,\n"
+"vmlinux edo vmlinux-en aldaera bat, luzapen batekin;\n"
+"\n"
+" * Errokoa: Linux instalazioaren \"erroko\" gailua edo ``/'';\n"
+"\n"
+" * Erantsi: Apple hardwarean, nukleoa eransteko aukera bideo-hardwarea\n"
+"hasieratzen laguntzeko erabiltzen da askotan, edo ohiko Apple saguetan\n"
+"gehienetan falta izaten diren 2. eta 3. botoien emulazioa gaitzeko\n"
+"teklatuan. Hona hemen adibide batzuk:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: aukera hau hasierako moduluak kargatzeko erabil daiteke, abioko\n"
+"gailua erabilgarri egon aurretik, edo ramdisk imajina bat kargatzeko\n"
+"emergentziazko abioa egin behar denean;\n"
+"\n"
+" * Initrd-tamaina: ramdisk-tamaina lehenetsia 4.096 bytekoa izan ohi da.\n"
+"Ramdisk handi bat esleitu behar baduzu, aukera hau erabil dezakezu;\n"
+"\n"
+" * Irakurri/idatzi: normalean \"erroko\" partizioa irakurtzeko soilik\n"
+"agertzen da hasieran, fitxategi-sistemak egiaztatu ahal izateko, sistema\n"
+"``aktibo'' egin aurretik. Hemen, aukera hori gaindidatz dezakezu;\n"
+"\n"
+" * BideorikEz: Apple bideoaren hardwarea bereziki problematikoa bada,\n"
+"aukera hau hauta dezakezu ``bideorikez'' moduan abiarazteko, jatorrizko\n"
+"frame buffer euskarriarekin;\n"
+"\n"
+" * Lehenetsia: sarrera hau hautatzen du Linux-en hautapen lehenetsi gisa,\n"
+"eta yaboot-en gonbitean SARTU sakatuz hauta daiteke. Sarrera hau ``*''\n"
+"batez nabarmenduko da, [Tab] sakatzen baduzu abioko hautapenak ikusteko."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "BlokMaius tekla"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"\"%s\" inprimagailua behar bezala gehitu da Star Office/OpenOffice.org/GIMP-"
+"n."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol eta Maius teklak batera"
+msgid "No floppy drive available!"
+msgstr "Ez dago diskete-unitate erabilgarririk!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Uneko inprimagailuak dituen aukerak ezagutzeko, irakurri ondoko zerrenda edo "
+"egin klik \"Inprimatu aukeren zerrenda\" botoian.%s%s\n"
+"\n"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Bi Maius teklak batera"
+msgid "Continue anyway?"
+msgstr "Jarraitu hala ere?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Eskuineko Alt tekla"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Zure inprimagailua ez badago zerrendan, aukeratu bateragarria (ikus "
+"inprimagailuaren eskuliburua) edo antzekoa den bat "
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaviarra (latindarra)"
+msgid "Printer"
+msgstr "Inprimagailua"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamdarra QWERTY \"ilara numerikoa\""
+msgid "Saudi Arabia"
+msgstr "Saudi Arabia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "AEBetako teklatua (nazioartekoa)"
+msgid "Internet"
+msgstr "Internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "US keyboard"
-msgstr "Estatu Batuetako teklatua"
+msgid "Some devices were added:\n"
+msgstr "Zenbait gailu gehitu dira:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "Erresuma Batuko teklatua"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometria: %s zilindro, %s buru, %s sektore\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrainarra"
+msgid "Printing on the printer \"%s\""
+msgstr "\"%s\" inprimagailuan inprimatzen"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkiarra (modernoa \"Q\" eredua)"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkiarra (tradizionala \"F\" eredua)"
+msgid "Restore From Tape"
+msgstr "Leheneratu Zintatik"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajikistango teklatua"
+msgid "Choose the profile to configure"
+msgstr "Aukeratu konfiguratzeko profila"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thailandiako teklatua"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "armeniarra (idazmakina)"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup Now from configuration file"
+msgstr "Egin babeskopia konfigurazio-fitxategitik"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamila (TSCII)"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbiarra (zirilikoa)"
+msgid "Restarting printing system..."
+msgstr "Inprimatze-sistema berrabiarazten ..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovakiarra (QWERTY)"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovakiarra (QWERTZ)"
+msgid "See hardware info"
+msgstr "Ikus hardwarearen informazioa"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Slovenian"
-msgstr "Esloveniarra"
+msgid "First sector of boot partition"
+msgstr "Arrankeko partizioaren lehen sektorea"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swedish"
-msgstr "suediarra"
+msgid "Printer manufacturer, model"
+msgstr "Inprimagailuaren fabrikatzailea, modeloa"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Errusiarra (Yawerty)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue (Inprimatu, ez egon ilaran)"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Russian"
-msgstr "errusiarra"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Errumaniarra (qwerty)"
+msgid "Subnet Mask:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Errumaniarra (qwertz)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo eta Bootsplash gai instalazio arrakastatsua"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanadarra (Quebec)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Bi parametro kritikoak freskatze-maiztasun bertikala eta sinkronizazio-"
+"maiztasun\n"
+"horizontala dira. Lehenengoak pantaila osoa freskatzeko maiztasuna \n"
+"zehazten du eta bigarrenak, eskaneatze-lerroak bistaratzekoa.\n"
+"\n"
+"OSO GARRANTZITSUA da zure monitoreak onar dezakeena baino sinkronizazio-"
+"balio \n"
+" handiagoko monitorerik ez zehaztea: monitorea honda dezakezu.\n"
+" Zalantzarik baduzu, aukeratu ezarpen kontserbadore bat."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugesa"
+msgid "Modify"
+msgstr "Aldatu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Poloniarra (qwertz diseinua)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"\"%s\" eta \"%s\" komandoen bidez inprimatze-lan baten aukera-ezarpenak alda "
+"daitezke. Aski da nahi diren ezarpenak komando-lerroan gehitzea, adib.: \"%s "
+"<fitxategia>\".\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Poloniarra (qwerty diseinua)"
+msgid "Need hostname, username and password!"
+msgstr "Ostalari-izena, erabiltzaile-izena eta pasahitza behar dira!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "norvegiarra"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV, web zerbitzari baten direktorioa zurean muntatu eta bertako "
+"fitxategi\n"
+"sistema balitz moduan erabiltzeko aukera ematen dizun protokolo bat da (web\n"
+"zerbitzaria WebDAV zerbitzari bezala konfiguratuta badago). WebDAV muntaia\n"
+"puntuak gehitu nahi bazenitu, hautatu \"Berria\"."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Dutch"
-msgstr "Holandarra"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltatarra (AEB)"
+msgid "new"
+msgstr "berria"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltatarra (Erresuma Batua)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Inprimaketa konfiguratu nahi duzu?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongoliarra (zirilikoa)"
+msgid "Wizard"
+msgstr "Morroia"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanma (Birmaniarra)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "%s detektatua"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonian"
-msgstr "Mazedoniarra"
+msgid "Please choose where you want to backup"
+msgstr "Aukeratu non egin nahi duzun babeskopia"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Malayalam"
+msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
+"Berrabiarazi egin behar duzu partizio-taulako aldaketek eragina izateko"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Latvian"
-msgstr "Letoniarra"
+msgid "Do not include the browser cache"
+msgstr "Ez sartu arakatzailearen cache-a"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniako QWERTY \"fonetikoa\""
+msgid "Please, choose your keyboard layout."
+msgstr "Aukeratu zure teklatu-diseinua."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniako QWERTY \"ilara numerikoa\""
+msgid "Standard"
+msgstr "Estandarra"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniako AZERTY (berria)"
+msgid "Please choose your mouse type."
+msgstr "Aukeratu sagu-mota."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniako AZERTY (zaharra)"
+msgid "Connect..."
+msgstr "Konektatu..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "\"%s\" inprimagailua ezartzen..."
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "birkonfiguratu"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laostarra"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Abortatu"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinamerikarra"
+msgid "Proxies configuration"
+msgstr "Proxy-en konfigurazioa"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Koreako teklatua"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japoniarra 106 tekla"
+msgid "Start: sector %s\n"
+msgstr "Hasi: %s sektorea\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Network interface already configured"
+msgstr "Sareko interfazea konfiguratuta dago"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Italian"
-msgstr "Italiarra"
+msgid "Couldn't access the floppy!"
+msgstr "Ezin izan da disketea atzitu!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandiarra"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "Bugzilla morroira konektatzen ..."
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Iraniarra"
+msgid "Mail Server"
+msgstr "Posta Zerbitzaria"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israeldarra (fonetikoa)"
+msgid "Please click on a partition"
+msgstr "Egin klik partizio batean"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli"
-msgstr "Israeldarra"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Croatian"
-msgstr "Kroaziarra"
+msgid "Have a nice day!"
+msgstr "Egun ona izan!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Hungariarra"
+msgid "across Network"
+msgstr "sarean zehar"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "Bertsio-berritu"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujaratera"
+msgid "Select Printer Connection"
+msgstr "Hautatu inprimagailu-konexioa"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Greek"
-msgstr "Grekoa"
+msgid "Scanning for TV channels in progress ..."
+msgstr "TB kanalak bilatzen..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiarra (diseinu \"latinoa\")"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Okerra FTP bidez fitxategia bidaltzean.\n"
+" Mesedez zuzendu zure FTP konfigurazioa."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiarra (diseinu \"errusiarra\")"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "French"
-msgstr "frantsesa"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Interneteko superzerbitzariaren daemon-ak (normalki inetd deitua) beste\n"
+"hainbat Internet-zerbitzu abiarazten ditu, behar izan ahala. Zerbitzu asko "
+"abiarazten ditu,\n"
+"hala nola telnet, ftp, rsh, eta rlogin. inetd desgaitzean bere ardurapeko\n"
+"zerbitzu guztiak desgaitzen dira."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Finnish"
-msgstr "finlandiarra"
+msgid "the height of the progress bar"
+msgstr "aurrerapen-barraren garaiera"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Spanish"
-msgstr "espainiarra"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Gorde %s bitartez ostalari honetan: %s\n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Estonian"
-msgstr "Estoniarra"
+msgid "Argentina"
+msgstr "Argentina"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (suediarra)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norvegiarra)"
+msgid "Domain Name Server"
+msgstr "Domeinuko Izen Zerbitzaria"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (AEB)"
+msgid "Security Level:"
+msgstr "Segurtasun-maila:"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Danish"
-msgstr "Daniarra"
+msgid "Mount points must begin with a leading /"
+msgstr "Muntatzen-puntuek / batez hasi behar dute"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Postfix Mail Server"
+msgstr "Postfix Posta Zerbitzaria"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Alemana (letra zaharkiturik ez)"
+msgid "Quit without saving"
+msgstr "Irten gorde gabe"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "German"
-msgstr "alemana"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Txekiarra (QWERTY)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Produktu hau MandrakeStore webgunean eskuragarri dago"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "txekiarra (QWERTZ)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Adierazi Drakbackup-en gehieneko\n"
+" tamaina "
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Suitzarra (diseinu frantsesa)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Hainbat gauza dituzu aukeran (%s).\n"
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Suitzarra (diseinu alemana)"
+msgid "Hard drive detection"
+msgstr "Disko gogorren detekzioa"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Bielorrusiarra"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Ez duzu talde edo paketerik hautatuta\n"
+"Nahi duzun gutxieneko instalazioa hautatu behar duzu"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosniarra"
+msgid "Please enter the WebDAV server URL"
+msgstr "Mesedez sartu WebDAV zerbitzariaren URL"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasildarra (ABNT-2)"
+msgid "Tajikistan"
+msgstr "Tadjikistan"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgariarra (BDS)"
+msgid "Accept"
+msgstr "Onartu"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgariarra (fonetikoa)"
+msgid "Description"
+msgstr "Azalpena"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Bengali"
-msgstr "Bengaliarra"
+msgid "Error opening %s for writing: %s"
+msgstr "Errorea %s idazteko irekitzean: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Belgian"
-msgstr "belgikarra"
+msgid "Mouse type: %s\n"
+msgstr "Sagu-mota: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "azerbaijandarra (latinoa)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
+"ekin."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Arabic"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Mesedez hautatu zure CD/DVD euskarri neurria"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "armeniarra (fonetikoa)"
+msgid "Expert Area"
+msgstr "Aditu area"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "armeniarra (idazmakina)"
+msgid "Choose a monitor"
+msgstr "Aukeratu monitorea"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "armeniarra (zaharra)"
+msgid "Empty label not allowed"
+msgstr "Ez da etiketa hutsik onartzen"
#: ../../keyboard.pm:1
#, c-format
-msgid "Albanian"
-msgstr "albaniarra"
+msgid "Maltese (UK)"
+msgstr "Maltatarra (Erresuma Batua)"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "poloniarra"
+msgid "I can't add any more partition"
+msgstr "Ezin da partizio gehiago gehitu"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Size in MB: "
+msgstr "Tamaina MBtan: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbawe"
+msgid "Remote printer"
+msgstr "Urruneko inprimagailua"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "Please choose a language to use."
+msgstr "Aukeratu erabiltzeko hizkuntza bat."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/network.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Hegoafrika"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ABISUA: Gailu hau Internetera konektatzeko konfiguratu da aldez aurretik.\n"
+"Gailu hau konfiguratuta mantentzeko, onartu, besterik gabe.\n"
+"Ondoko eremuak aldatzen badituzu konfigurazio hau gainidatziko da."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "seriekoa"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Ordenagailua konfigura dezaket automatikoki erabiltzaile bat sartzeko.\n"
+"Eginbide hau erabili nahi duzu?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formateatu"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "Generic Printers"
+msgstr "Inprimagailu generikoak"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis eta Futuna uharteak"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
+"fitxategi-izena"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "First sector of the root partition"
+msgstr "Arrankeko partizioaren lehen sektorea"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Birjina Uharteak (Amerikarrak)"
+msgid "Alternative drivers"
+msgstr "Gidari alternatiboak"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Birjina Uharteak (Britainiarrak)"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Hautatu behar dituzun aukera guztiak.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent eta Grenadinak"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Letoniarra"
+msgid "Cape Verde"
+msgstr "Cabo Verde"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguai"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Estatu Batuetako kanpoaldeko uharte txikiak"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
+"fitxategi-izena"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraina"
+msgid "/Options/Test"
+msgstr "/Aukerak/Probatu"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Tanzania"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
+"Maila hau kontuz erabili behar da. Sistema erabilerrazagoa izango da, baina\n"
+"oso erraz erasotzekoa: ez da erabili behar beste ordenagailu batzuekin edo \n"
+"Internetekin konektatuta dauden makinetan. Ez dago pasahitzik."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Thailandia"
+msgid "Mounting partition %s"
+msgstr "%s partizioa formateatzen"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "User name"
+msgstr "Erabiltzaile-izena"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad eta Tobago"
+msgid "New configuration (isdn-light)"
+msgstr "Konfigurazio berria (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Turkey"
-msgstr "Turkia"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Zein partizio erabili nahi duzu Linux4Win-erako?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisia"
+msgid "Backup system"
+msgstr "Sistemaren babeskopia "
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Test pages"
+msgstr "Proba-orriak"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "East Timor"
-msgstr "Ekialdeko Timor"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Leheneratu beharreko datuen zerrenda:\n"
+"\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "%s kopiatzen"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tadjikistan"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket inprimagailuaren aukerak"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Thailand"
-msgstr "Thailandia"
+msgid "Card mem (DMA)"
+msgstr "Txartelaren mem (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "France"
+msgstr "Frantzia"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "French Southern Territories"
-msgstr "Hegoaldeko lurralde frantsesak"
+msgid "browse"
+msgstr "arakatu"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Chad"
-msgstr "Txad"
+msgid "Checking installed software..."
+msgstr "Instalatutako softwarea egiaztatzen..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turk eta Caico uharteak"
+msgid "Remote printer name missing!"
+msgstr "Urruneko inprimagailu-izena falta da!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swazilandia"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinam"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Inprimaketa gaitu nahi duzu bertako sarean dauden inprimagailuetan?\n"
#: ../../lang.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Turkey"
+msgstr "Turkia"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome eta Principe"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "Number of buttons"
+msgstr "Botoi kopurua"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamdarra QWERTY \"ilara numerikoa\""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Module"
+msgstr "Modulua"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Gainera, programa honen edo \"foomatic-configure\"ren bidez sortu ez diren "
+"ilarak ezin dira transferitu."
-#: ../../lang.pm:1
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leona"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Hardware"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Eslovakia"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ktrl eta Alt teklak batera"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard eta Jan Mayen uharteak"
+msgid "United States"
+msgstr "Estatu Batuak"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Eslovenia"
+msgid "Default OS?"
+msgstr "SE lehenetsia?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Santa Helena"
+msgid "Swiss (German layout)"
+msgstr "Suitzarra (diseinu alemana)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapur"
+msgid "Configure all heads independently"
+msgstr "Buru guztiak independenteki konfiguratu"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
+"konfiguratu nahi duzuna. . Inprimagailuaren konfigurazioa zeharo "
+"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
+"baduzu konfigurazio pertsonalizatua, hautatu \"Eskuzko konfigurazioa\"."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "NTP Server"
+msgstr "NTP Zerbitzaria"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelleak"
+msgid "Load/Save on floppy"
+msgstr "Kargatu/Gorde disketean"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Salomon uharteak"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Gai honek ez dauka oraindik abiapen-irudirik %s-n!"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabia"
+msgid "nice"
+msgstr "baliagarria"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d segundo"
+
+#: ../../network/modem.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Aukeratu modema konektatuta dagoen serieko ataka."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Russia"
-msgstr "errusiarra"
+msgid "Country"
+msgstr "Estatua:"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Romania"
-msgstr "Errumania"
+msgid "Property"
+msgstr "Propietatea"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid "LAN Configuration"
+msgstr "Sare lokalaren konfigurazioa (LAN)"
#: ../../lang.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguai"
+msgid "Path or Module required"
+msgstr "Bidea edo Modulua behar da"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+msgid "Advanced Options"
+msgstr "Aukera aurreratuak"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Coma bug"
+msgstr ""
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Bide hautaketa"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Orain, Mandrake Linux sistema instalatzeko zein partizio erabiliko d(ir)en\n"
+"aukeratu behar duzu. Partizioak jadanik definituta badaude, (GNU/Linux-en\n"
+"aurreko instalazio batek edo beste partizio-tresna batek definituta),\n"
+"lehendik dauden partizioak erabil ditzakezu. Bestela, disko gogorreko\n"
+"partizioak definitu behar dira.\n"
+"\n"
+"Partizioak sortzeko, lehendabizi disko gogor bat hautatu behar duzu.\n"
+"Partizioa egiteko diskoa hautatzeko, sakatu ``hda'' lehen IDE unitaterako,\n"
+"``hdb'' bigarrenerako, ``sda'' lehen SCSI unitaterako eta abar.\n"
+"\n"
+"Hautatutako disko gogorraren partizioa egiteko, aukera hauek erabil\n"
+"ditzakezu:\n"
+"\n"
+" * \"Garbitu dena\": aukera honek hautatutako disko gogorreko partizio\n"
+"guztiak ezabatuko ditu;\n"
+"\n"
+" * \"Auto-esleitu\": aukera honekin automatikoki sor ditzakezu \"Ext2\" eta\n"
+"swap partizioak disko gogorreko leku librean;\n"
+"\n"
+" * \"Gehiago\": eginbide gehiago aukeran izateko:\n"
+"\n"
+" * \"Gorde partizio-taula\": partizio-taula diskete batean gordetzen du.\n"
+"Baliagarria de geroago partizio-taula berreskuratzeko, behar izanez gero.\n"
+"Oso gomendagarria da urrats hau egitea;\n"
+"\n"
+" * \"Leheneratu partizio-taula\": lehen gordetako partizio-taula\n"
+"disketetik berreskuratzeko erabil daiteke;\n"
+"\n"
+" * \"Berreskuratu partizio-taula\": partizio-taula hondatuta badago,\n"
+"berreskuratzen saia zaitezke aukera hau erabiliz. Kontuz ibili eta gogoan\n"
+"izan huts egin dezakeela;\n"
+"\n"
+" * \"Birkargatu partizio-taula\": aldaketa guztiak desegin eta hasierako\n"
+"partizio-taula kargatzen du;\n"
+"\n"
+" * \"Euskarri aldagarrien automuntatzea\": aukera hau desgaitzen baduzu,\n"
+"euskarri aldagarriak (disketeak, CD-ROMak eta horrelakoak) eskuz muntatu\n"
+"eta desmuntatzera behartuko dituzu erabiltzaileak.\n"
+"\n"
+" * \"Morroia\": erabili aukera hau disko gogorreko partizioa egiteko\n"
+"morroia erabili nahi baduzu. Partizioak egiten ongi ez badakizu, morroia\n"
+"erabiltzea gomendatzen dizugu;\n"
+"\n"
+" * \"Desegin\": aukera hau aldaketak bertan behera uzteko erabil dezakezu;\n"
+"\n"
+" * \"Aldatu modu normalera/aditu modura\": partizioekin gauza gehiago\n"
+"egiteko aukera ematen du (mota, aukerak, formatua) eta informazio gehiago\n"
+"ematen du;\n"
+"\n"
+" * \"Eginda\": disko gogorrean partizioak egiten bukatutakoan, aldaketak\n"
+"berriro diskoan gordeko ditu.\n"
+"\n"
+"Oharra: edozein aukera eskura dezakezu teklatuaren bidez. Partizio batetik\n"
+"bestera joateko, [Tab] eta [Gora/Behera] geziak erabil ditzakezu.\n"
+"\n"
+"Partizio bat hautatuta dagoenean, aukera hauek dituzu:\n"
+"\n"
+" * Ktrl-c beste partizio bat sortzeko (partizio huts bat hautatuta\n"
+"dagoenean);\n"
+"\n"
+" * Ktrl-d partizioa ezabatzeko;\n"
+"\n"
+" * Ktrl-m muntatze-puntua ezartzeko.\n"
+"\n"
+"Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa nahi\n"
+"baduzu, irakurri ext2fs kapitulua ``Erreferentzia-eskuliburua''n.\n"
+"\n"
+"PPC makina batean instalatu behar baduzu, gutxienez 1 MBko HFS\n"
+"``bootstrap'' partizio txiki bat sortzea komeniko zaizu, yaboot abioko\n"
+"kargatzaileak erabil dezan. Partizioa zertxobait handiagoa egitea hautatzen\n"
+"baduzu, adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat eta\n"
+"ramdisk imajinak biltegiratzeko emergentziazko abioa egin ahal izateko."
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid "There was an error installing packages:"
+msgstr "Errore bat izan da paketeak instalatzean:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint-Pierre eta Mikelune"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjet inprimagailuaren konfigurazioa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Poland"
-msgstr "Polonia"
+msgid "Undo"
+msgstr "Desegin"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Save partition table"
+msgstr "Gorde partizio-taula"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filipinak"
+msgid "Finnish"
+msgstr "finlandiarra"
#: ../../lang.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Ginea Berria"
+msgid "Macedonia"
+msgstr "Mazedonia"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "French Polynesia"
-msgstr "Polinesia frantsesa"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Erabiltzaileen araberako konpartitzeak \"fileshare\". \n"
+"taldea erabiltzen du. Userdrake erabil dezakezu talde \n"
+"honetan erabiltzeak gehitzeko."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid "Slovenian"
+msgstr "Esloveniarra"
#: ../../lang.pm:1
-#, c-format
-msgid "Panama"
-msgstr "Panama"
+#, fuzzy, c-format
+msgid "Libya"
+msgstr "Liberia"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Script-ak konfiguratzen, softwarea instalatzen, zerbitzariak abiarazten..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Zeelanda Berria"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- CD-ra erre"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Table"
+msgstr "Taula"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "I don't know how to format %s in type %s"
+msgstr "Ez dakit nola formateatu %s %s motan"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "Model"
+msgstr "Eredua"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragua"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "Stop Server"
+msgstr "Gelditu Zerbitzaria"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk uhartea"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Hautatu gai bat\n"
+"lilo eta bootsplash-entzat,\n"
+"bakoitzarena banaka\n"
+"hautatu dezakezu"
-#: ../../lang.pm:1
-#, c-format
-msgid "Niger"
-msgstr "Niger"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Eredua"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Kaledonia berria"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozanbike"
+msgid "Use auto detection"
+msgstr "Erabili auto-detekzioa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPMk saguaren euskarria gehitzen die Midnight Commander bezalako\n"
+"testuan oinarritutako Linux aplikazioei. Halaber kontsolan saguaren bidez "
+"ebaki eta itsasteko aukera ematen du eta laster-menuen euskarria eransten du."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
+msgid "Started on boot"
+msgstr "Abioan abiaraztekoa"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Batu MandrakeSoft Euskarri taldeetara eta Linuxen Lerroko Komunitateetara "
+"zure jakinduria elkarbanatu eta besteei lagundu lerroko euskarri teknikoko "
+"webguneetan Aditu ezaguna bilakatuz:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Maldives"
-msgstr "Maldivak"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Ondorengo aukerak ezarri daitezke zure sistemaren segurtasuna\n"
+"moldatzeko. Azalpenak behar badituzu, klikatu Laguntza.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Maurizio"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Gorde Zintara gailu honetan: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "East Timor"
+msgstr "Ekialdeko Timor"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "Del profile..."
+msgstr "Ezabatu profila..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinika"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Iparraldeko Mariana uharteak"
+msgid "Installing Foomatic..."
+msgstr "Foomatic instalatzen ..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Amaitu saioa eta, ondoren, sakatu Ktrl-Alt-Atzera"
-#: ../../lang.pm:1
-#, c-format
-msgid "Myanmar"
-msgstr "Birmania"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "%s detektatua"
-#: ../../lang.pm:1
-#, c-format
-msgid "Mali"
-msgstr "Mali"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Macedonia"
-msgstr "Mazedonia"
+msgid "Package: "
+msgstr "Paketea: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall uharteak"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Ezin da /etc/sysconfig/bootsplash idatzi."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "SECURITY WARNING!"
+msgstr "SEGURTASUN OHARRA!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Moldova"
-msgstr "Moldavia"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid "No, I don't want autologin"
+msgstr "Ez, ez dut saioa automatikoki hasi nahi"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Morocco"
-msgstr "Maroko"
+msgid "Windows Migration tool"
+msgstr "Windows Migrazio tresna"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Libya"
-msgstr "Liberia"
+msgid "All languages"
+msgstr "Aukeratu hizkuntza"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Letonia"
+msgid "Removing %s"
+msgstr "%s kentzen"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxenburgo"
+msgid "Testing your connection..."
+msgstr "Konexioa probatzen..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "zatiaren tamaina"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Lithuania"
-msgstr "Lituania"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Pasahitzak gaituta daude orain, baina sareko ordenagailu gisa erabiltzea ez "
+"da komeni oraindik."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Start sector: "
+msgstr "Hasierako sektorea: "
#: ../../lang.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Congo (Brazzaville)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
#: ../../lang.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid "Seychelles"
+msgstr "Seychelleak"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Santa Luzia"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Printerdrake-k inprimagailua auto-detektatzean lortutako modelo-izena "
+"inprimagailuen datu-basean dituen modeloekin konparatu du, egokiena "
+"aurkitzeko. Aukera okerrekoa izan daiteke, batez ere zure inprimagailua ez "
+"bada azaltzen datu-baseko zerrendan. Beraz, begiratu aukera egokia den eta, "
+"hala bada, egin klik \"Modeloa zuzena da\"n, bestela, egin klik \"Hautatu "
+"modeloa eskuz\"en hurrengo pantailara joan eta modeloa eskuz hautatzeko.\n"
+"\n"
+"Hau aurkitu du Printerdrake-k zure inprimagailuarentzat:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "Libano"
+msgid "Bad password on %s"
+msgstr "%s-n pasahitz okerra"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laos"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
+"\n"
+"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
#: ../../lang.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Kaiman uharteak"
+msgid "Security Administrator (login or email)"
+msgstr "Segurtasun Kudeatzailea (sarrera edo posta-e)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Korea"
-msgstr "Gehiago"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Barkatu, 2.4 kernelak onartzen ditugu soilik."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr ""
+msgid "Romanian (qwerty)"
+msgstr "Errumaniarra (qwerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts eta Nevis"
+msgid "Under Devel ... please wait."
+msgstr "Garatzen... itxaron."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Komoroak"
+msgid "Czech Republic"
+msgstr "Txekiar errepublika"
#: ../../lang.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Egypt"
+msgstr "Egipto"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kanbodia"
+msgid "Old configuration (isdn4net)"
+msgstr "Konfigurazio zaharra (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgizistan"
+msgid "Sound card"
+msgstr "Soinu-txartela"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Import Fonts"
+msgstr "Letra-tipoen inportazioa"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"FAT partizio handi bat duzu\n"
+"(normalean MicroSoft Dos/Windows-ek erabilia).\n"
+"Lehendabizi partizio horri tamaina aldatzea gomendatzen dizut\n"
+"(egin klik bertan, gero egin klik \"Aldatu tamaina\"n)"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Japan"
-msgstr "Japonia"
+msgid "Suppress Temporary Files"
+msgstr "Ezabatu aldi baterako fitxategiak"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Jordan"
-msgstr "Jordania"
+msgid "Change partition type"
+msgstr "Aldatu partizio-mota"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Iceland"
-msgstr "Islandia"
+msgid "Network Options"
+msgstr "Sareko Aukerak"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Iran"
-msgstr "Irak"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Erakutsi gaia\n"
+"kontsolapean"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Indiako Ozeanoko Britainiar Lurraldea"
+msgid "(on %s)"
+msgstr "(%s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "India"
-msgstr "India"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Buffer-gainezkatzeen eta formatu-kateen erasoen aurka defendatzen duen "
+"liburutegi bat."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Ireland"
-msgstr "Irlanda"
+msgid "average"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
+msgid "New printer name"
+msgstr "Inprimagailu-izen berria"
#: ../../lang.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hungaria"
+msgid "Equatorial Guinea"
+msgstr "Ekuatore Ginea"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Croatia"
-msgstr "Kroazia"
+msgid "Build Backup"
+msgstr "Egin babeskopia"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
+"<fitxategia>\" komandoa edo \"%s <fitxategia>\".\n"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard uhartea eta McDonald uharteak"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Romanian (qwertz)"
+msgstr "Errumaniarra (qwertz)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China"
-msgstr "Txina"
+msgid "Write Config"
+msgstr "Idatzi Ezarpena"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed daemon-arekin IP bidatze-taula automatikoki egunera daiteke,\n"
+"RIP protokoloaren bidez. RIP asko erabiltzen da sare txikietan, baina\n"
+"banabide-protokolo konplexuagoak behar dira sare konplexuetan."
#: ../../lang.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Ginea Bissau"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Browse"
+msgstr "Arakatu"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Hegoaldeko Georgia eta Hegoaldeko Sandwich uharteak"
+msgid "CDROM"
+msgstr "CDROMean"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekuatore Ginea"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Internetera orain konektatu nahi duzu?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadalupe"
+msgid "Belgian"
+msgstr "belgikarra"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Guinea"
-msgstr "Ginea"
+msgid "Do you have an ISA sound card?"
+msgstr "ISA soinu-txartela duzu?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Zure sisteman ez da ethernet sare-moldagailurik detektatu.\n"
+"Ezin dut konexio-mota hau konfiguratu."
-#: ../../lang.pm:1
-#, c-format
-msgid "Greenland"
-msgstr "Groenlandia"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "Windows Domeinua"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Can't make screenshots before partitioning"
+msgstr "Ezin da pantaila-argazkirik egin partizioak egin aurretik"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Host Name"
+msgstr "Ostalari Izena"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "French Guiana"
-msgstr "Guyana frantsesa"
+msgid "/File/Save _As"
+msgstr "/Fitxategia/Gorde _honela"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s ez dago eskaner datubasean, eskuz konfiguratu?"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Erresuma Batua"
+msgid "Delay before booting default image"
+msgstr "Imajina lehenetsia abiarazi arteko atzerapena"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Restrict command line options"
+msgstr "Murriztu komando-lerroko aukerak"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Faroe Islands"
-msgstr "Faroe uharteak"
+msgid "East Europe"
+msgstr "Europa Ekialdea"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronesia"
+msgid "Use free space"
+msgstr "Erabili leku librea"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland uharteak (Malvinak)"
+msgid "use dhcp"
+msgstr "erabili dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+msgid "Mail alert"
+msgstr "Posta alerta"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finlandia"
+msgid "Internet configuration"
+msgstr "Interneteko konfigurazioa"
#: ../../lang.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopia"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Spain"
-msgstr "Espainia"
+msgid "Detected %s"
+msgstr "%s detektatua"
-#: ../../lang.pm:1
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Auto-detektatuta"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Mendebaldeko Sahara"
+msgid "Finish"
+msgstr "Amaitu"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Egypt"
-msgstr "Egipto"
+msgid "Show automatically selected packages"
+msgstr "Erakutsi automatikoki hautatutako paketeak"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Estonia"
-msgstr "Estonia"
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Ekuador"
+msgid "Togo"
+msgstr "Togo"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Algeria"
-msgstr "Aljeria"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Zerbaitek hutsegin du! - mkisofs instalatuta dago?"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikar errepublika"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominika"
+msgid "Please try again"
+msgstr "Saiatu berriro"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danimarka"
+msgid "The model is correct"
+msgstr "Modeloa zuzena da"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibuti"
+msgid "FAT resizing failed: %s"
+msgstr "FAT tamaina-aldaketak huts egin du: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "Zipre"
+msgid "Individual package selection"
+msgstr "Pakete indibidualen hautapena"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Christmas uhartea"
+msgid "This partition is not resizeable"
+msgstr "Partizio honi ezin zaio tamaina aldatu"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cabo Verde"
+msgid "Location"
+msgstr "Kokalekua"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "USA (cable-hrc)"
+msgstr "AEB (kablea-hrc)"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Kolonbia"
+msgid "Journalised FS"
+msgstr "Journalised FS"
#: ../../lang.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(makina honetan)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Chile"
-msgstr "Txile"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS unitate-letra: %s (uste hutsa)\n"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Hautatu fitxategiak edo direktorioak eta egin klik 'Gehitu'n"
#: ../../lang.pm:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cook uharteak"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Boli Kosta"
+msgid "omit scsi modules"
+msgstr "jaramonik ez scsi moduluei"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Switzerland"
-msgstr "Suitza"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
+"Sare-instalazioa egiten ari zarenez, zure sarea konfiguratuta dago jadanik.\n"
+"Hautatu Ados zure konfigurazioa mantentzeko, edo hautatu Utzi Internet eta "
+"Sare-konexioa birkonfiguratzeko.\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Erdialdeko Afrikar Errepublika"
+msgid "Keyboard layout: %s\n"
+msgstr "Teklatu-diseinua: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos Keeling uharteak"
+msgid "Maltese (US)"
+msgstr "Maltatarra (AEB)"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Network File System (NFS), SMB (Lan Manager/Windows), eta NCP \n"
+"(NetWare) muntatze-puntu guztiak muntatu eta desmuntatzen ditu."
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Belize"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "Telebista-txartela"
-#: ../../lang.pm:1
-#, c-format
-msgid "Belarus"
-msgstr "Bielorrusia"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Aldatu modu normalera"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Size"
+msgstr "Tamaina"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet uhartea"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
#: ../../lang.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Greenland"
+msgstr "Groenlandia"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamak"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazil"
-msgstr "Brasil"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Ez da zinta etiketa zuzena. Zinta %s etiketa dauka."
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
+"Gaituta dago orain.\n"
+"\n"
+"Zer egin nahi duzu?"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
+msgid "Delete All NBIs"
+msgstr "NBI Guztiak Ezabatu"
-#: ../../lang.pm:1
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"LILO eta grub abioko kargatzaileak dira. Etapa hau erabat automatizatuta\n"
+"izaten da normalean. Izan ere, DrakXk diskoaren abioko sektorea aztertzen\n"
+"du eta bertan aurkitzen duenaren arabera jokatzen du:\n"
+"\n"
+" * Windows-en abioko sektore bat aurkitzen badu, grub abioko sektorearekin\n"
+"ordeztuko du. Horrela, GNU/Linux edo beste SE bat kargatu ahal izango duzu;\n"
+"\n"
+" * grub edo LILO abioko sektore bat aurkitzen badu, berri batekin ordeztuko\n"
+"du.\n"
+"\n"
+"Zalantzarik izanez gero, DrakXk hainbat aukera proposatuko ditu.\n"
+"\n"
+" * \"Erabili beharreko abioko kargatzailea\": hiru aukera dituzu:\n"
+"\n"
+" * \"GRUB\": grub nahiago baduzu (testu-menua).\n"
+"\n"
+" * \"LILO menu grafikoarekin\": LILO bere interfaze grafikoarekin\n"
+"nahiago baduzu.\n"
+"\n"
+" * \"LILO testu-menuarekin\": LILOen testu-menuaren interfazea nahiago\n"
+"baduzu.\n"
+"\n"
+" * \"Abioko gailua\": gehienetan, ez duzu disko lehenetsia (\"/dev/hda\")\n"
+"aldatuko, baina nahiago baduzu, abioko kargatzailea bigarren disko\n"
+"gogorrean (\"/dev/hdb\") edo diskete batean (\"/dev/fd0\") ere instala\n"
+"daiteke;\n"
+"\n"
+" * \"Imajina lehenetsia abiarazi arteko atzerapena\": ordenagailua\n"
+"berrabiaraztean, hau da erabiltzaileari ematen zaion denbora, abioko\n"
+"kargatzailearen menuan lehenetsia ez den abioko sarrera bat aukeratzeko.\n"
+"\n"
+"!! Kontuan izan abioko kargatzaile bat ez instalatzea aukeratzen baduzu\n"
+"(hemen \"Utzi\" hautatuz), Mandrake Linux sistema abiarazteko bideren bat\n"
+"beharko duzula! Halaber, edozein aukera aldatu aurretik, ziurtatu\n"
+"badakizula zer egiten duzun. !!\n"
+"\n"
+"Elkarrizketa-koadro honetako \"Aurreratua\" botoian klik eginda aukera\n"
+"aurreratu ugari lortuko dituzu, erabiltzaile adituentzat erreserbatuak.\n"
+"\n"
+"Abioko kargatzailearen parametro orokorrak konfiguratutakoan, abioan\n"
+"erabilgarri egongo diren aukeren zerrenda bistaratuko da.\n"
+"\n"
+"Ordenagailuan beste sistema eragile bat instalatuta baduzu, automatikoki\n"
+"gehituko zaio abioko menuari. Hemen, lehendik dauden aukerak gehiago\n"
+"zehaztea hauta dezakezu. Hautatu sarrera bat eta egin klik \"Aldatu\"n\n"
+"aldaketak egiteko edo kentzeko; \"Gehitu\"k sarrera berria sortzen du eta\n"
+"\"Eginda\" hautatuz gero instalazioaren hurrengo urratsera joaten da."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "XFree-ren zein konfigurazio izan nahi duzu?"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid "More"
+msgstr "Gehiago"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgaria"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Segurtasun-maila honekin, sistema hau erabil liteke zerbitzari gisa.\n"
+"Segurtasun hau nahikoa da sistema bezero askoren konexioak onartzen dituen \n"
+"zerbitzari gisa erabili ahal izateko. Oharra: zure makina Interneteko bezero "
+"soila bada, hobe duzu maila apalagoa."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Account Password"
+msgstr "Kontuaren pasahitza"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Partizio batean abioko kargatzailea instalatzea erabaki duzu.\n"
+"Horrek esan nahi du baduzula abioko kargatzaile bat abioko unitatean (adib.: "
+"System Commander).\n"
+"\n"
+"Zein da zure abioko unitatea?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Tajik keyboard"
+msgstr "Tajikistango teklatua"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia Herzegovina"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"%s spooler-erako egin duzun inprimagailu-konfigurazioa %s spooler-era (uneko "
+"spooler-era) kopia dezakezu. Konfigurazio-datu guztiak (inprimagailuaren "
+"izena, azalpena, kokalekua, \n"
+"konexio-mota eta aukera-ezarpenak lehenetsiak) hartuko ditu, baina lanak ez "
+"dira transferituko.\n"
+"Ilara guztiak ezin dira transferitu, ondorengo arrazoiak direla eta:\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaijan"
+msgid "Font List"
+msgstr "Letra-tipoen zerrenda"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Baliteke Open Firmware abioko gailua aldatu behar izatea\n"
+" abioko kargatzailea gaitzeko. Berrabiaraztean abioko kargatzailearen "
+"gonbita ez\n"
+" baduzu ikusten, eduki sakatuta Command-Option-O-F abiaraztean eta sartu:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Gero, idatzi: shut-down\n"
+"Hurrengo abiaraztean abioko kargatzailearen gonbita ikusi behar duzu."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Badirudi makina zaharra edo ezezaguna duzula,\n"
+"yaboot abioko kargatzaileak ez du funtzionatuko.\n"
+"Instalazioak jarraitu egingo du, baina\n"
+"BootX erabili beharko duzu makina abiarazteko"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australia"
+msgid "Select file"
+msgstr "Hautatu fitxategia"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa amerikarra"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Komando horiek aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
+"komandoa\" eremuan erabil ditzakezu ere, baina hor ez eman fitxategi-izena, "
+"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antartika"
+msgid "Japan"
+msgstr "Japonia"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "Print option list"
+msgstr "Inprimatzeko aukeren zerrenda"
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antilla herbeheretarrak"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Aldaketa egin da, baina, eragina izan dezan, saioa amaitu behar duzu"
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Armenia"
+msgid "Search servers"
+msgstr "Bilatu zerbitzarietan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albania"
+msgid "NCP queue name missing!"
+msgstr "NCP ilara-izena falta da!"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
+"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
+"ariko da"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "\"%s\" etiketadun CDROMa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua eta Barbuda"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Sistemaren entropia gorde eta leheneratzen du ausazko zenbakiak\n"
+"hobeto sortzeko."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Arabiar Emirerri Batuak"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"%s fitxategi-sistemaren egiaztapenak hutsegin du. Okerrak zuzendu nahi "
+"dituzu? (adi, datuak gal ditzakezu)"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Turn your computer into a reliable server"
+msgstr "Bihurtu zure makina zerbitzari fidagarria"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid " (driver %s)"
+msgstr " (%s kontrolatzailea)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Atzera-begiztako fitxategia(k):\n"
+" %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "%s muntaketa zirkularrak\n"
+msgid "I don't know"
+msgstr "Ez dakit"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Kendu bolumen logikoak lehendabizi\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", \"%s\" TCP/IP ostalaria, %s ataka"
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA euskarririk ez dago 2.2 nukleoentzat. Erabili 2.4 nukleoa."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
+"Auto-instalazioko diskete bat konfiguratzera zoaz. Eginbide hau arriskutsu "
+"samarra da eta kontuz ibili behar da.\n"
+"\n"
+"Eginbide honekin, ordenagailu honetan egin duzun instalazioa errepikatu ahal "
+"izango duzu, eta urrats batzuetan datuak eskatuko zaizkizu interaktiboki, "
+"balioak aldatu ahal izateko.\n"
+"\n"
+"Ahalik eta segurtasun handiena izateko, partizioa egitea eta formateatzea ez "
+"dira inoiz automatikoki egingo, berdin dio zer aukeratu duzun ordenagailu "
+"hau instalatu duzunean.\n"
+"\n"
+"Jarraitu nahi duzu ?"
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUGITU GURPILA!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Zure txartelak orain %s\"%s\" gidaria erabitzen du (zure txartelarentzako "
+"gidari lehenetsia \"%s\" da)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Sagua aktibatzeko,"
+msgid "Post Uninstall"
+msgstr "Posta-desinstalazioa"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Probatu sagua"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Sagurik gabe"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Segurtasun-maila"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "none"
-msgstr "bat ere ez"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongoliarra (zirilikoa)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "3 botoi"
+msgid "Add a module"
+msgstr "Gehitu modulua"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 botoi"
+msgid "Profile to delete:"
+msgstr "Ezabatu beharreko profila:"
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "Botoi 1"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Fitxategi lokalak"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "bus-sagua"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking sagua"
+msgid "Account Login (user name)"
+msgstr "Kontuaren identifikatzailea (erabiltzaile-izena)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech sagua (seriekoa, C7 mota zaharrekoa)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall konfiguratzailea\n"
+"\n"
+"Zure Sare/Internet sarbidea drakconnect erabiliz konfiguratu duzula\n"
+"ziurtatu aurrera egin aurretik."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Benin"
+msgstr "Benin"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr "Uruguai"
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Path selection"
+msgstr "Bide hautaketa"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Monitorea: %s\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Okerren bat gertatzen ari da zure unitatean. \n"
+"Datuen osotasuna egiaztatzeko probak huts egin du. \n"
+"Horrek esan nahi du, diskoan ezer idazten bada, zaborra sortuko dela ausaz"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Printer host name or IP missing!"
+msgstr "Inprimagailuaren ostalari izena falta da edo IP falta da!"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "3 botoiko sagu generikoa"
+msgid "Please check all users that you want to include in your backup."
+msgstr "Hautatu babeskopian sartu nahi dituzun erabiltzaile guztiak."
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "2 botoiko sagu generikoa"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"%s eskaner hau printerdrake-rekin konfiguratu behar da.\n"
+"Mandrake Kontrol Zentroko Hardwarearen ataletik abiaraz dezakezu "
+"printerdrake."
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "serial"
-msgstr "seriekoa"
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Japan (cable)"
+msgstr "Japonia (kablea)"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Gurpila"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Ongi etorri Inprimagailu Ezarpen Morroira\n"
+"\n"
+"Morroi honek zure konputagailu honetara lotutako inprimagailua(k), sarera "
+"zuzenean lotutakoa(k) edo Windows makina batera loturikoa(k) instalatzen "
+"lagunduko dizu.\n"
+"\n"
+"Makina honetara lotutako inprimagailuak badituzu, mesedez entxufatu eta "
+"piztu itzazu auto-detektatuak izan daitezen. Berdina sareko inprimagailu eta "
+"Windows makinetara lotutako inprimagailuekin ere.\n"
+"\n"
+"Ohartu sarera lotutako inprimagailuen auto-detekzioak denbora gehiago behar "
+"duela makina honetara lotuta dauden inprimagailuak bakarrik auto-"
+"detektatzeko baino. Beraz ezabatu sareko eta/edo windows-ostalari "
+"inprimagailuen auto-detekzioa behar ez dituzunean.\n"
+"\n"
+" Klikatu \"Hurrengoa\" prest zaudenean, eta \"Etsi\" zure inprimagailua "
+"orain ezarri nahi ez duzunean."
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Generic"
-msgstr "Generikoa"
+msgid "Initial tests"
+msgstr "Hasierako probak"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "Jarraitu"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Custom Restore"
+msgstr "Leheneratze pertsonalizatua"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Gurpildun PS2 sagu generikoa"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Script-based"
+msgstr "Script-ean oinarritua"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Standard"
-msgstr "Estandarra"
+msgid "Error reading file %s"
+msgstr "Errorea %s fitxategia irakurtzean"
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Sagua"
+msgid "PLL setting:"
+msgstr "PLL ezarpenak :"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Txandakatu alfabetikoaren eta taldeka ordenatuaren artean"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "FAT partizio bat eduki behar duzu /boot/efi-n muntatuta"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Tolestu zuhaitza"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Zabaldu zuhaitza"
+msgid "The URL must begin with http:// or https://"
+msgstr "URLak http:// edo https:// hasiera izan behar du"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "Informazioa"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Inprimagailua atzitzeko URIa zuzenean zehatz dezakezu. URIak CUPS edo "
+"Foomatic zehaztapenak bete behar ditu. Kontuan izan spooler guztiek ez "
+"dituztela URI mota guztiak onartzen."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Zuzena da?"
+msgid "Other OS (SunOS...)"
+msgstr "Beste SE bat (SunOS...)"
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Instalatu/Eguneratu"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Errorea %s fitxategian idaztean"
+msgid "%d packages"
+msgstr "%d paketeak"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Babeskopia txarra"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Huts egin du %s fitxategitik leheneratzean: %s"
+msgid "Domain Authentication Required"
+msgstr "Domeinu Autentifikazioa Behar da"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Hutsune bat duzu partizio-taulan baina ezin dut erabili.\n"
-"Irtenbide bakarra lehen mailako partizioak mugitzea da, hutsunea partizio "
-"hedatuen ondoren gera dadin"
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Partizio hedatua ez da plataforma honetan onartzen"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "muntatzeak huts egin du: "
+msgid "Use libsafe for servers"
+msgstr "Erabili libsafe zerbitzarietarako"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "beharbada"
+msgid "Icelandic"
+msgstr "Islandiarra"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "baliagarria"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "oso baliagarria"
+msgid "Please relog into %s to activate the changes"
+msgstr "Hasi berriro saioa %s(e)n aldaketak aktibatzeko"
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "important"
-msgstr "garrantzitsua"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "must have"
-msgstr "ezinbestekoa"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modua"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ez dago nahikoa partizio %d RAID mailarako\n"
+msgid "Output"
+msgstr "Irteera"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid-ek huts egin du"
+msgid "Circular mounts %s\n"
+msgstr "%s muntaketa zirkularrak\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-ek huts egin du (beharbada raid-tresnak faltako dira?)"
+msgid "Martinique"
+msgstr "Martinika"
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ezin zaio partizio bat gehitu RAID md%d-ri (formateatuta dago)"
+msgid "HardDrive / NFS"
+msgstr "HardDrive / NFS"
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Stop"
-msgstr "Gelditu"
+msgid "a number"
+msgstr "zenbaki bat"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start"
-msgstr "Hasi"
+msgid "Swedish"
+msgstr "suediarra"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr "Abioan"
+msgid "Which %s driver should I try?"
+msgstr "Zein %s kontrolatzaile probatu behar dut?"
-#: ../../services.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ez dago zerbitzu honi buruzko\n"
-"informazio gehiago."
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Alerta jasoko duzu hautatutako zerbitzuetakoren bat gelditzen bada"
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Zerbitzuak eta daemon-ak"
+msgid "Filesystem types:"
+msgstr "Fitxategi-sistemen motak:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "geldituta"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", funtzio anitzeko gailua - HP JetDirect"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "martxan"
+msgid "Northern Mariana Islands"
+msgstr "Iparraldeko Mariana uharteak"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Aukeratu zein zerbitzari abiarazi behar den automatikoki abioan"
+msgid "none"
+msgstr "bat ere ez"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Database Server"
-msgstr "Datu-baseen zerbitzaria"
+msgid "user :"
+msgstr "Erabiltzailea :"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote Administration"
-msgstr "Urruneko administrazioa"
+msgid "Please enter your password"
+msgstr "Sartu pasahitza"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
-msgstr "Fitxategi-konpartitzea"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
+"Sortu beharreko profilaren izena (profil berria oraingoaren kopia gisa "
+"sortuko da) :"
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Abiapen Disketea"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Mesedez markatu zure RW eukarria ezabatu nahi baduzu (1. saioa)"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printing"
-msgstr "Inprimatzea"
+msgid "Ghostscript referencing"
+msgstr "Ghostscript erreferentzia"
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X letra-tipoen zerbitzaria abiarazten du (nahitaezkoa da XFree-k\n"
-"funtzionatu ahal izan dezan.)."
+msgid "Bootloader"
+msgstr "Abioko kargatzailea"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Kargatu USB gailuen kontrolatzaileak."
+msgid "Move"
+msgstr "Lekuz aldatu"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog, daemon askok erabiltzen duten zerbitzua da, mezuak sistemako\n"
-"hainbat egunkari-fitxategitan sartzeko. Komeni izaten da syslog beti "
-"exekutatzea."
+msgid "Bootloader to use"
+msgstr "Erabili beharreko abioko kargatzailea"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Abiarazi zure makinako soinu-sistema"
+msgid "SMB server host"
+msgstr "SMB zerbitzariaren ostalaria"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Samba Zerbitzaria"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-"rwho protokoloak urruneko erabiltzaileei rwho daemon-a (finger-en antzekoa)\n"
-"duen makina batean sartutako erabiltzaile guztien zerrenda eman diezaieke."
+"\n"
+"Abisua\n"
+"\n"
+"Irakurri arretaz ondorengo baldintzak. Zerbaitekin ados ez bazaude,\n"
+"ez duzu hurrengo CDa instalatzeko baimenik. Sakatu 'Ezetsi' \n"
+"instalazioa euskarri horiek erabili gabe jarraitzeko.\n"
+"\n"
+"\n"
+"Hurrengo CDko osagai batzuk ez dira GPL Lizentziaren edo\n"
+"antzeko akordioen araberakoak. Osagai horietako bakoitza\n"
+"bere lizentzia zehatzaren baldintzen araberakoa da. \n"
+"Irakurri arretaz lizentzia horiek eta bete bertako baldintzak osagai \n"
+"horiek erabili edo birbanatu aurretik. \n"
+"Lizentzia horiek oro har osagaia transferitzea, bikoiztea (babeskopiak\n"
+"egiteko izan ezik), birbanatzea, ingeniaritza alderantzikatzea, \n"
+"desmihiztatzea, deskonpilatzea edo aldatzea eragotziko dute. \n"
+"Kontratua ez betetzeak lizentzia zehatzak ematen dituen eskubide guztiak \n"
+"kentzea ekarriko du berehala. Baldin eta lizentzia zehatzaren baldintzek "
+"eskubidea ematen\n"
+"ez badizute, normalki ezin izango dituzu programak sistema batean baino\n"
+"gehiagotan instalatu, edo sarean erabiltzeko egokitu. Zalantzarik baduzu, "
+"jarri harremanetan\n"
+"osagaiaren banatzailearekin edo editorearekin zuzenean. \n"
+"Osagai horiek hirugarrenei transferitzea edo kopiatzea, dokumentazioa\n"
+"barne, debekatuta egoten da normalki.\n"
+"\n"
+"\n"
+"Hurrengo CDko osagaiei dagozkien eskubide guztiak haien egileenak \n"
+"dira eta software-programei aplikatzen zaizkien jabetza \n"
+"intelektualaren eta copyright-aren legeek babesten dituzte.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoloak sare bateko erabiltzaileei beste makina batzuetan\n"
-"nor sartzen den identifikatzeko aukera ematen die."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Kendu inprimagailu hau Star Office/OpenOffice.org/GIMP-tik"
#: ../../services.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"rstat protokoloari esker, sareko erabiltzaileek sare horretako \n"
-"edozein makinaren performantzia nolakoa den jakin dezakete."
+"Linux-en Zerbitzari Birtuala, performantzia handiko zerbitzari oso\n"
+"erabilgarria eraikitzeko erabiltzen da."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon-arekin IP bidatze-taula automatikoki egunera daiteke,\n"
-"RIP protokoloaren bidez. RIP asko erabiltzen da sare txikietan, baina\n"
-"banabide-protokolo konplexuagoak behar dira sare konplexuetan."
+msgid "4 billion colors (32 bits)"
+msgstr "4 mila milioi kolore (32 bit)"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Esleitu gailu \"gordinak\" (raw devices) blokeko gailuei \n"
-"(disko gogorreko partizioak adib.), Oracle bezalako aplikazioentzat."
+#: ../../lang.pm:1
+#, c-format
+msgid "Micronesia"
+msgstr "Mikronesia"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid "License"
msgstr ""
-"Sistemaren entropia gorde eta leheneratzen du ausazko zenbakiak\n"
-"hobeto sortzeko."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "This may take a moment to generate the keys."
+msgstr "Honek giltzak sortzeko denbora tarte bat behar du."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-"Postfix posta garraiatzeko agentea da (Mail Transport Agent - MTA), hau da, "
-"posta elektronikoa makina batetik bestera eramaten duen programa."
+"Inprimagailu auto-detekzioa (Bertakoa, TCP/Socket, eta SMB inprimagailuak)"
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-"Ataka-mapatzaileak RPC konexioak kudeatzen ditu. Konexio horiek\n"
-"NFS eta NIS moduko protokoloek erabiltzen dituzte. RPC mekanismoa erabiltzen "
-"duten\n"
-"protokoloen zerbitzari gisa jokatzen duten makinetan aktibatu behar da\n"
-"ataka-maparen zerbitzaria."
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"PCMCIA euskarria eramangarrietan ethernet eta modemak\n"
-"eta horrelakoak onartzeko izaten da normalki. Ez da abiaraziko "
-"konfiguratuta izan ezean, beraz\n"
-"lasai eduki daiteke instalatuta premiarik izan ez arren."
+"Errorea gertatu da - ez da fitxategi-sistema berriak sortzeko gailu "
+"baliozkorik aurkitu. Aztertu zure hardwarea arazo honen arrazoia bilatzeko"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Onartu OKI 4w eta winprinter bateragarriak."
+msgid "Starting the printing system at boot time"
+msgstr "Abioan inprimatze-sistema abiarazi"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Abioan automatikoki aktibatu BlokZenb tekla (zenbakiak\n"
-"blokeatzekoa) kontsolan eta XFree-n."
+msgid "Do you want to start the connection at boot?"
+msgstr "Abioan hasi nahi duzu konexioa?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+msgid "Processor ID"
msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak \n"
-"konpartitzeko. Zerbitzu honek NFS fitxategi-blokeatzearen funtzionalitatea\n"
-"eskaintzen du."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Sound trouble shooting"
msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak konpartitzeko.\n"
-"Zerbitzu honek NFS zerbitzariaren funtzionaltasuna (/etc/exports "
-"fitxategian\n"
-"konfiguratua) eskaintzen du."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Abioan hasteko konfiguratuta dauden sare-interfaze guztiak\n"
-"aktibatzen/desaktibatzen ditu."
+msgid "Polish (qwerty layout)"
+msgstr "Poloniarra (qwerty diseinua)"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Network File System (NFS), SMB (Lan Manager/Windows), eta NCP \n"
-"(NetWare) muntatze-puntu guztiak muntatu eta desmuntatzen ditu."
+msgid "activate now"
+msgstr "aktibatu orain"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"named (BIND) domeinu-izenen zerbitzari bat (DNS) da, ostalari-izenak ebatzi "
-"eta IP helbide bihurtzeko erabiltzen dena."
+"\n"
+"Drakbackup ekintzak CD bitartez:\n"
+"\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"Linux-en Zerbitzari Birtuala, performantzia handiko zerbitzari oso\n"
-"erabilgarria eraikitzeko erabiltzen da."
+"%s inprimatze-sistema segurtasun-maila %sn dabilen sisteman instalatzera "
+"zoaz.\n"
+"\n"
+"Inprimatze-sistema honek inprimatze-lanei itxaroteko eta lanak maneiatzeko "
+"daemon (atzeko planoko prozesu) bat exekutatzen du. Daemon hori urruneko "
+"makinek ere atzitu dezakete sarearen bitartez eta hala, erasoak jasateko "
+"gunea izan daiteke. Beraz, daemon hautatu bakan batzuk besterik ez dira "
+"abiarazten lehenespenez segurtasun-maila honetan.\n"
+"\n"
+"Makina honetan konfiguratu nahi duzu inprimaketa?"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd inprimaketako daemon-a da. Beharrezkoa da lpr-k ondo funtziona\n"
-"dezan. Inprimatze-lanak inprimagailu(eta)ra esleitzen dituen zerbitzaria da."
+msgid "Host \"%s\", port %s"
+msgstr "\"%s\" ostalaria, %s portua"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf-ek batzuetan hainbat ataza egiten ditu abioan\n"
-"sistemaren konfigurazioa mantentzeko."
+msgid "This partition can't be used for loopback"
+msgstr "Partizio hau ezin da atzera-begiztarako erabili"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Hardwarea automatikoki detektatu eta konfiguratzea abioan."
+msgid "File already exists. Use it?"
+msgstr "Fitxategia badago lehendik ere. Erabili?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "received: "
msgstr ""
-"Nukleoaren goiburukoaren birsortze automatikoa /boot-en\n"
-"honentzat: /usr/include/linux/{autoconf,version}.h"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Pakete honek hautatutako teklatu-mapa kargatzen du\n"
-"/etc/sysconfig/keyboard fitxategian ezarritakoaren arabera. kbdconfig "
-"utilitatearen bidez hauta daiteke teklatu-mapa.\n"
-"Zerbitzu hau gaituta uztea komeni da makina gehienetan."
+msgid "Right Alt key"
+msgstr "Eskuineko Alt tekla"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Abiarazi Linux-nukleoen 2.2 serieko pakete-iragazketa, zure \n"
-"makina sareko erasoetatik babesteko suebaki bat ezartzeko."
+msgid "the list of alternative drivers for this sound card"
+msgstr "Soinu txartel honentzako gidari alternatiboen zerrenda"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneteko superzerbitzariaren daemon-ak (normalki inetd deitua) beste\n"
-"hainbat Internet-zerbitzu abiarazten ditu, behar izan ahala. Zerbitzu asko "
-"abiarazten ditu,\n"
-"hala nola telnet, ftp, rsh, eta rlogin. inetd desgaitzean bere ardurapeko\n"
-"zerbitzu guztiak desgaitzen dira."
+msgid "Gateway"
+msgstr "Atebidea"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Fitxategi-konpartitzea"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache World Wide Web-eko zerbitzari bat da. HTML fitxategiak eta CGI "
-"zerbitzatzeko erabili ohi da."
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake-k hardware-proba bat exekutatzen du eta nahi izanez \n"
-"gero hardware berria/aldatua konfiguratzen du."
+msgid "Tunisia"
+msgstr "Tunisia"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPMk saguaren euskarria gehitzen die Midnight Commander bezalako\n"
-"testuan oinarritutako Linux aplikazioei. Halaber kontsolan saguaren bidez "
-"ebaki eta itsasteko aukera ematen du eta laster-menuen euskarria eransten du."
+msgid "Profile: "
+msgstr "Profila: "
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-"cron UNIX programa estandar bat da, erabiltzaileak zehaztutako programak\n"
-"programatutako orduan exekutatzen dituena. vixie cron-ek hainbat eginbide \n"
-"gehitzen dizkio oinarrizko UNIX cron-i, hala nola segurtasun hobea eta "
-"konfigurazio-aukera ahaltsuagoak."
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at komandoaren bidez programatutako komandoak exekutatzen ditu at \n"
-"exekutatzean zehaztutako orduan, eta batch komandoak exekutatzen ditu \n"
-"batezbesteko karga nahikoa baxua denean."
+msgid "XawTV isn't installed!"
+msgstr "XawTV ez dago instalatuta!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"apmd bateriaren egoera kontrolatzeko eta syslog-en jasotzeko erabiltzen\n"
-"da. Bateria gutxi dagoenean makina itzaltzeko ere erabil daiteke."
+"Sortu/Transferitu\n"
+"babeserako giltzak SSH-rentzako"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, komando-antolatzaile periodikoa."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Ez sartu fitxategi kritikoak (passwd, group, fstab)"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Abiarazi ALSA (Advanced Linux Sound Architecture) soinu-sistema"
+msgid "old static device name used in dev package"
+msgstr "dev paketean erabiltzen den gailu estatikoaren izen zaharra"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Paketeak instalatzen..."
+msgid "This label is already used"
+msgstr "Etiketa hau jadanik erabili da"
-#: ../../standalone.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
+"\n"
+"Ongi etorri Inprimagailu Ezarpen Morroira\n"
+"\n"
+"Morroi honek zure konputagailu honetara lotutako inprimagailua(k) edo sarera "
+"zuzenean lotutakoa(k) instalatzen lagunduko dizu.\n"
+"\n"
+"Makina honetara lotutako inprimagailuak badituzu, mesedez entxufatu eta "
+"piztu itzazu auto-detektatuak izan daitezen. Berdina sareko inprimagailuekin "
+"ere.\n"
+"\n"
+"Ohartu sarera lotutako inprimagailuen auto-detekzioak denbora gehiago behar "
+"duela makina honetara lotuta dauden inprimagailuak bakarrik auto-"
+"detektatzeko baino. Beraz ezabatu sareko inprimagailuen auto-detekzioa behar "
+"ez duzunean.\n"
+"\n"
+" Klikatu \"Hurrengoa\" prest zaudenean, eta \"Etsi\" zure inprimagailua "
+"orain ezarri nahi ez duzunean."
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
+"%s partizioa formateatu ondoren, partizioko datu guztiak galdu egingo dira"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Konexio-mota: "
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "select perm file to see/edit"
+msgstr "hautatu ikusi/editatzeko fitxategia"
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"Sartu instalazioko CDROMa unitatean eta sakatu Ados.\n"
+"Ez baduzu, sakatu Utzi bertsio-berritzea saihesteko."
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
+msgid "Use group id for execution"
+msgstr "Erabili taldearen id exekuziorako"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "Aukeratu erabiltzaile lehenetsia:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Teklatua"
-
-#: ../../standalone.pm:1
-#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"\n"
+"Urruneko CUPS zerbitzariko inprimagailuak ez dituzu hemen konfiguratu behar; "
+"horrelako inprimagailuak automatikoki detektatuko dira."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
+"Instalatu ondoren erabilgarri egongo diren beste hizkuntza batzuk aukera "
+"ditzakezu"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+msgid "Domain"
+msgstr "Domeinua"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Zehaztu RAM tamaina beharrezkoa bada (%d MB aurkituak)"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
-" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
-" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
-" baldintzak betez gero.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
-" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
-" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
-" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
"\n"
-" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
-" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Exit install"
-msgstr "Irten instalaziotik"
+msgid "Provider dns 2 (optional)"
+msgstr "Hornitzailearen dns 2 (aukerakoa)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Install updates"
-msgstr "Sistema-eguneratzeak"
+msgid "Boot device"
+msgstr "Abioko gailua"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Konfiguratu zerbitzuak"
+msgid "Which partition do you want to resize?"
+msgstr "Zein partiziori aldatu nahi diozu tamaina?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Konfiguratu X"
+msgid "United States Minor Outlying Islands"
+msgstr "Estatu Batuetako kanpoaldeko uharte txikiak"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Install bootloader"
-msgstr "Abioko kargatzailea"
+msgid "A tool to monitor your logs"
+msgstr "Zure erregistroak ikusteko tresna"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Konfiguratu sarea"
+msgid "Djibouti"
+msgstr "Djibuti"
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Gehitu erabiltzaile bat"
+msgid "detected on port %s"
+msgstr "%s atakan detektatua"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Root password"
-msgstr "Ezarri root-aren pasahitza"
+msgid "LPD"
+msgstr "LPD"
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Install system"
-msgstr "Instalatu sistema"
+msgid "Graphics card: %s\n"
+msgstr "Txartel grafikoa: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Aukeratu instalatu beharreko paketeak"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format partitions"
-msgstr "Eman formatua partizioei"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Inprimatzea"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Mesedez markatu DVDRAM gailua erabiltzen ari bazara"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Aukeratu teklatua"
+msgid "Splash selection"
+msgstr "Splash hautaketa"
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Hautatu instalazio-klasea"
+msgid "Extended partition not supported on this platform"
+msgstr "Partizio hedatua ez da plataforma honetan onartzen"
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Disko gogorren detekzioa"
+msgid "ISDN Configuration"
+msgstr "ISDN konfigurazioa"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Konfiguratu sagua"
+msgid "high"
+msgstr "handia"
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "License"
-msgstr ""
+msgid "Internet Connection Sharing"
+msgstr "Interneteko konexioa konpartitzea"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Language"
-msgstr "Aukeratu hizkuntza"
+msgid "Choose file"
+msgstr "Aukeratu fitxategia"
-#: ../../ugtk2.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "utopia 25"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
+"Kontuz! Lehendik dagoen suebaki-konfigurazio bat detektatu da. Beharbada "
+"eskuz konponketa batzuk egin beharko dituzu instalazioaren ondoren."
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "OK"
-msgstr "Ados"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Inprimaketa/Argazki Txartelen Sarrera \"%s\"-n"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Inprimaketa gaitu nahi duzu goian aipatutako inprimagailuetan edo bertako "
+"sarean dauden inprimagailuetan?\n"
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Inprimagailu-modeloaren hautapena"
-#: ../../Xconfig/card.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Gurpildun PS2 sagu generikoa"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
+msgid "Removing old printer \"%s\"..."
+msgstr "\"%s\" inprimagailu zaharra ezabatzen..."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Hautatu eskaner bat"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Kendu hautatutakoak"
+
+#: ../../lang.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazio ESPERIMENTALAREKIN"
+msgid "French Southern Territories"
+msgstr "Hegoaldeko lurralde frantsesak"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the vendor name of the processor"
+msgstr "gailuaren saltzaile izena"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin."
+msgid "All data on this partition should be backed-up"
+msgstr "Partizio honetako datu guztiek babeskopia eduki beharko lukete"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazioarekin"
+msgid "Installing package %s"
+msgstr "%s paketea instalatzen"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Checking device and configuring HPOJ..."
msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake, baina XFree "
-"%s(r)ekin soilik,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria eduki dezake, baina "
-"XFree %s(r)ekin soilik.\n"
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
+"Partizio gehiago edukitzeko, ezabatu horietako bat partizio hedatu bat sortu "
+"ahal izateko"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Zure inprimagailua automatikoki konfiguratu zen zure PC-tik argazki txartel "
+"unitateetara sarrera emateko. Orain \"MtoolsFM\" programa grafikoa erabiliz "
+"(Menua: \"Aplikazioak\" -> \"Fitxategi tresnak\" -> \"MTools Fitxategi "
+"Kudeatzailea\") edo \"mtools\" komando lerroko utilitatea erabiliz (sartu "
+"\"man mtools\" komando lerroan informazio gehiago jasotzeko) zure argazki "
+"txartelak atzitu ditzakezu. Txartelaren fitxategi-sistema \"p:\" unitate "
+"hizkipean aurkituko duzu, edo ondorengo hizkietan argazki txartela duten HP "
+"inprimagailu bat baino gehiago baduzu. \"MtoolsFM\" tresnan unitate hizki "
+"artean mugitu zaitezke fitxategi-zerrenden goi-eskuin ertzetan dagoen eremua "
+"erabiliz."
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfiguratu \"%s\"%s txartela soilik"
+msgid "Choose packages to install"
+msgstr "Aukeratu instalatu beharreko paketeak"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Erabili Xinerama hedapena"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" Posta bidaltzean izandako errore batzuk postfix gaizki \n"
+" konfiguratuta dagoelako izan dira. Konpontzeko, \n"
+" myhostname edo mydomain ezarri behar duzu hemen: /etc/postfix/main.cf\n"
+"\n"
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Buru guztiak independenteki konfiguratu"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "%s unitatean dauden partizio eta datu GUZTIAK galdu egingo dira"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree-ren zein konfigurazio izan nahi duzu?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Zure sistemak ez du nahikoa leku instalatzeko edo bertsio-berritzeko (%d > %"
+"d)"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree konfigurazioa"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Inprimagailu bakoitzak izen bat behar du (adibidez \"inprimagailua\"). "
+"Azalpenaren eta Kokalekuaren eremuak ez dira nahitaez bete behar. "
+"Erabiltzaileentzako iruzkinak dira."
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Hautatu txartel grafikoaren memoria-tamaina"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"Zure sistemak buru anitzeko konfigurazioa onartzen du.\n"
-"Zer egin nahi duzu?"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Buru anitzeko konfigurazioa"
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Aukeratu X zerbitzaria"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "Sare-interfazea"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "X server"
-msgstr "X zerbitzaria"
+msgid "Reading printer data..."
+msgstr "Inprimagailu-datuak irakurtzen..."
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB edo gehiago"
+msgid "Korean keyboard"
+msgstr "Koreako teklatua"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Not connected"
+msgstr "Konektatu gabe"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Greek"
+msgstr "Grekoa"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts eta Nevis"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Transferentzia arrakastatsua\n"
+"Zerbitzarian saioa hasi dezakezula frogatu dezakezu honela:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"eta ez zaizu pasahitzik eskatuko."
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Enable OF Boot?"
+msgstr "Gaitu OF abiaraztea?"
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Ezin da JFS erabili 16MB baino gutxiagoko partizioetarako"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitorearen FreskBert: %s\n"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Aldaketak mantendu?\n"
-"Hau da uneko konfigurazioa:\n"
-"\n"
-"%s"
+msgid "path"
+msgstr "bidea"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Options"
-msgstr "Aukerak"
+msgid "Mount point"
+msgstr "Muntatze-puntua"
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Test"
-msgstr "Froga"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolution"
-msgstr "Bereizmena"
+msgid "Restore system"
+msgstr "Leheneratu sistema"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Monitor"
-msgstr "Monitorea"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "The DHCP end ip"
+msgstr "DHCP-ren eremu amaiera"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "Txartela grafikoa"
+msgid "Another one"
+msgstr "Beste bat"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Freskatze-maiztasun bertikala"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Freskatze-maiztasun horizontala"
+msgid "Colombia"
+msgstr "Kolonbia"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Bi parametro kritikoak freskatze-maiztasun bertikala eta sinkronizazio-"
-"maiztasun\n"
-"horizontala dira. Lehenengoak pantaila osoa freskatzeko maiztasuna \n"
-"zehazten du eta bigarrenak, eskaneatze-lerroak bistaratzekoa.\n"
+"`%s' - uneko konfigurazioa:\n"
"\n"
-"OSO GARRANTZITSUA da zure monitoreak onar dezakeena baino sinkronizazio-"
-"balio \n"
-" handiagoko monitorerik ez zehaztea: monitorea honda dezakezu.\n"
-" Zalantzarik baduzu, aukeratu ezarpen kontserbadore bat."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play frogak hutsegin du. Mesedez hautatu monitore zehatz bat"
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Saltzailea"
+"Sarea: %s\n"
+"IP helbidea: %s\n"
+"IP atribuzioa: %s\n"
+"Kontrolatzailea: %s"
#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Aukeratu monitorea"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Txartel grafikoa: %s"
+msgid "Details"
+msgstr "Xehetasunak"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Aukeratu bereizmena eta kolorearen sakonera"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Segurtasun-arrazoiengatik, deskonektatu egingo da orain."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Resolutions"
-msgstr "Bereizmenak"
+msgid "Synchronization tool"
+msgstr "Sinkronizazio tresna"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 mila milioi kolore (32 bit)"
+msgid "Checking your system..."
+msgstr "Zure sistema egiaztatzen..."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milioi kolore (24 bit)"
+msgid "Print"
+msgstr "Inprimatu"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila kolore (16 bit)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Sartu bolumen etiketa %s duen zinta\n"
+" %s zinta unitate gailuan"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila kolore (15 bit)"
+msgid "Mongolia"
+msgstr "Mongolia"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 kolore (8 bit)"
+msgid "Mounted\n"
+msgstr "Muntatuta\n"
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Zuzena da?"
+msgid "Graphical Interface"
+msgstr "X abioan"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Users"
+msgstr "Leheneratu erabiltzaileak"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segundo"
+msgid "Encryption key for %s"
+msgstr "Enkriptatze-gakoa"
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
+"Ataka-mapatzaileak RPC konexioak kudeatzen ditu. Konexio horiek\n"
+"NFS eta NIS moduko protokoloek erabiltzen dituzte. RPC mekanismoa erabiltzen "
+"duten\n"
+"protokoloen zerbitzari gisa jokatzen duten makinetan aktibatu behar da\n"
+"ataka-maparen zerbitzaria."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Adi: txartel grafiko hau frobatzeak zure konputagailua blokeatu dezake"
+msgid "Detected hardware"
+msgstr "Detektatu hardwarea"
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Konfigurazioa probatu nahi duzu?"
+msgid "Mauritius"
+msgstr "Maurizio"
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Konfigurazioaren proba"
+msgid "Myanmar (Burmese)"
+msgstr "Myanma (Birmaniarra)"
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Enabling swap partition %s"
+msgstr "%s partizioa formateatzen"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
+"erabiltzeko (edo ez dago nahikoa leku)"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Zein arau erabiltzen du zure TB?"
+msgid "Armenian (old)"
+msgstr "armeniarra (zaharra)"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Dirudienez zure txartela grafikoak TV-OUT konektorea dauka.\n"
-"Frame-bufferra erabiliz lanegin dezan konfiguratu daiteke.\n"
-"\n"
-"Honetarako txartela grafikoa TBri lotu behar diozu konputagailua abiatu "
-"aurretik.\n"
-"Ondoren hautatu \"TVout\" sarrera abiapen-zamatzailean\n"
-"\n"
-"Ezaugarri hau badaukazu?"
+"\"%s\" izeneko inprimagailu bat badago %s(e)n. \n"
+"Sakatu \"Transferitu\" gainidazteko.\n"
+"Beste izen bat idatz dezakezu, edo inprimagailu hori saltatu."
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
msgstr ""
-"Ordenagailua abiatzean X automatikoki abiarazteko konfigura dezaket.\n"
-"Berrabiaraztean X hastea nahi duzu?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X abioan"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 kontrolatzailea: %s\n"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 zerbitzaria: %s\n"
+"Aurkitu zure arazoei erantzuna MandrakeSoft-en lerroko euskarri "
+"plataformaren bitartez"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Bereizmena: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ", \"%s\" ostalaria, %s protua"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorearen sakonera: %s\n"
+msgid "Monaco"
+msgstr "Monako"
-#: ../../Xconfig/various.pm:1
+# #this syntax doesn't work yet in perl :-(
+# #msgid "%s formatting of %s failed"
+# #msgstr "%2$s(r)i %1$s formatua emateak huts egin du"
+#: ../../fs.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memoria grafikoa: %s kB\n"
+msgid "%s formatting of %s failed"
+msgstr "%s %s(r)i formatua emateak huts egin du"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Txartel grafikoa: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Partizioak huts egin du: %s"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorearen FreskBert: %s\n"
+msgid "Canada (cable)"
+msgstr "Kanada (kablea)"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorearen SinkHoriz: %s\n"
+msgid "Upgrade"
+msgstr "Bertsio-berritu"
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorea: %s\n"
+msgid "Workstation"
+msgstr "Lan-estazioa"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Sagu-gailua: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"%s paketea instalatzen\n"
+"%% %d"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sagu-mota: %s\n"
+msgid "Kyrgyzstan"
+msgstr "Kirgizistan"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Teklatu-diseinua: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Oinarrizko dokumentazioarekin (gomendatua)"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Aukerak: %s"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, komando-antolatzaile periodikoa."
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Muntatze-puntua: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Erroko partizioa eduki behar duzu.\n"
+"Horretarako, sortu partizio bat (edo egin klik lehendik dagoen batean).\n"
+"Gero aukeratu ``Muntatze-puntua'' ekintza eta ezarri `/'"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Server: "
-msgstr "Zerbitzaria: "
+msgid "Proxy should be http://..."
+msgstr "Proxy-ak http://... izan behar du"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URLak http:// edo https:// hasiera izan behar du"
+msgid "South Africa"
+msgstr "Hegoafrika"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Mesedez sartu WebDAV zerbitzariaren URL"
+msgid "Western Sahara"
+msgstr "Mendebaldeko Sahara"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Mount point"
-msgstr "Muntatze-puntua"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Disketea/ISO"
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Server"
-msgstr "Zerbitzaria"
+msgid "Modify printer configuration"
+msgstr "Aldatu inprimagailuaren konfigurazioa"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount"
-msgstr "Muntatu"
+msgid "Choose a partition"
+msgstr "Aukeratu partizio bat"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unmount"
-msgstr "Desmuntatu"
+msgid "Edit current rule"
+msgstr "Editatu uneko araua"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New"
-msgstr "Berria"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-"WebDAV, web zerbitzari baten direktorioa zurean muntatu eta bertako "
-"fitxategi\n"
-"sistema balitz moduan erabiltzeko aukera ematen dizun protokolo bat da (web\n"
-"zerbitzaria WebDAV zerbitzari bezala konfiguratuta badago). WebDAV muntaia\n"
-"puntuak gehitu nahi bazenitu, hautatu \"Berria\"."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Erabili ``%s'' horren ordez"
+msgid "Please test the mouse"
+msgstr "Probatu sagua"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Type"
-msgstr "Mota"
+msgid "Other Media"
+msgstr "Beste euskarri bat"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Erabili ``Desmuntatu'' lehendabizi"
+msgid "Backup system files"
+msgstr "Sistema-fitxategien babeskopia"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Delete"
-msgstr "Ezabatu"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Create"
-msgstr "Sortu"
+msgid "Sector"
+msgstr "Sektorea"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Fitxategi-sistemen motak:"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Empty"
-msgstr "Hutsik"
+msgid "LDAP Base dn"
+msgstr "LDAP basea dn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Ezin duzu pakete hori hautatu: ez dago instalatzeko lekurik"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "Windows Domeinua"
+msgid "generate auto-install floppy"
+msgstr "Sortu auto-instalazioko disketea"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Dialing mode"
+msgstr "Markatzeko modua"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "File sharing"
+msgstr "Fitxategi-konpartitzea"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "Clean /tmp at each boot"
+msgstr "Garbitu /tmp abiatzen den bakoitzean"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Please choose your type of mouse."
+msgstr "Aukeratu sagu-mota."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No hard drives found"
-msgstr "Ez da disko zurrunik aurkitu"
+msgid "class of hardware device"
+msgstr "hardware gailu klasea"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Egin klik partizio batean"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"FAT partizio handi bat duzu\n"
-"(normalean MicroSoft Dos/Windows-ek erabilia).\n"
-"Lehendabizi partizio horri tamaina aldatzea gomendatzen dizut\n"
-"(egin klik bertan, gero egin klik \"Aldatu tamaina\"n)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Aukeratu ekintza"
+msgid "United Kingdom"
+msgstr "Erresuma Batua"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Morroia"
+msgid "running"
+msgstr "martxan"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot erabiltzeko asmoa baduzu, utzi lekua (2048 sektore nahikoa da)\n"
-"diskoaren hasieran"
+msgid "default"
+msgstr "lehenetsia"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Egin zure datuen babeskopia lehendabizi"
+msgid "Indonesia"
+msgstr "Indonesia"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Read carefully!"
-msgstr "Irakurri arretaz"
+msgid "France [SECAM]"
+msgstr "Frantzia [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Enkriptatze-gakoa (berriro)"
+msgid "restrict"
+msgstr "murriztu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Enkriptatze-gakoa"
+msgid "must have"
+msgstr "ezinbestekoa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Enkriptatze-gakoak ez datoz bat"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPSek ez ditu onartzen Novell zerbitzarietako inprimagailuak edo datuak "
+"libre osatutako komando batean bidaltzen dituztenak.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Enkriptatze-gako hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domeinu-izena:"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Aukeratu fitxategi-sistema enkriptatzeko gakoa"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"Gure Linux soluzioen aukera osoa, eta baita produktu eta beste \"gutizia\" "
+"batzutan eskaintza bereziak eskuragarri daude lerroan gure e-dendan:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Fitxategi-sistema enkriptatzeko gakoa"
+msgid "access to administrative files"
+msgstr "administrazio-fitxategien atzipena"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Type: "
-msgstr "Mota: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Errorea sendmail bitartez posta bidaltzean\n"
+" Berri emateko mezua ez da bidali\n"
+" Mesedez konfiguratu posta-bidalketa sendmail bitartez"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", funtzio anitzeko gailua \\/*%s ataka paraleloan"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "%d kanalean id %d\n"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partizio-taularen mota: %s\n"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "%s LVM-diskoak\n"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Info: "
-msgstr "Info: "
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Konektatu Internetekin"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s zilindro, %s buru, %s sektore\n"
+msgid "Restore Other"
+msgstr "Leheneratu bestelakoak"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaina: %s\n"
+msgid "TV card"
+msgstr "Telebista-txartela"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Irakurketa-soilik"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT zerbitzariko inprimagailua"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Device: "
-msgstr "Gailua: "
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (umask)\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"Set the root umask."
msgstr ""
-"\n"
-"Bootstrap partizio berezi hau\n"
-"sistemaren abio bikoitza\n"
-"egiteko da.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Kendu hautatutakoak"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"\n"
-"Partizio hau kontrolatzailearen \n"
-"partizioa izan daiteke, hobe duzu\n"
-"bere horretan uztea.\n"
+"Postfix posta garraiatzeko agentea da (Mail Transport Agent - MTA), hau da, "
+"posta elektronikoa makina batetik bestera eramaten duen programa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Atzera-begiztako fitxategi-izena: %s"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "%s RAID-diskoak\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Hemen aukeratu dezakezu zein tekla edo tekla konbinaziok\n"
+"egingo duen teklatu mota ezberdinen arteko konmutazioa\n"
+"(adib: latindarra eta ez latindarra)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Sare-konfigurazioa"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "%s zatiaren tamaina\n"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Level %s\n"
-msgstr "%s maila\n"
+msgid "Restore From CD"
+msgstr "Leheneratu CDtik"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Lehenespenez abiarazteko partizioa\n"
-" (MS-DOS abiorako, ez lilo-rako)\n"
+"Zure konputagailua Interneteko konexioa banatu dezan konfiguratzera zoaz.\n"
+"Eginbide horrekin, zure bertoko sareko konputagailuek zure konputagailuaren "
+"Internet konexioa erabili ahal izango dute.\n"
+"\n"
+"Zure Sare/Internet sarbidea drakconnect erabiliz konfiguratu duzula\n"
+"ziurtatu aurrera egin aurretik.\n"
+"\n"
+"Adi: Sare-moldagailu dedikatu bat behar duzu Bertako Eremuko Sare (LAN) bat "
+"konfiguratzeko."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Please choose which network adapter you want to use to connect to Internet."
msgstr ""
-"Atzera-begiztako fitxategia(k):\n"
-" %s\n"
+"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "Muntatuta\n"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"MandrakeSoftek, Mandrake Linuxentzako soluzio bateragarri profesionalak "
+"eskaintzen dituzten konpainien artean aukeratutako batzuekin lanegiten du. "
+"MandrakeStoren aipatutako kide horien zerrenda eskuratu daiteke."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Formateatu gabe\n"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Interneteko konexioa konpartitzea desgaituta dago orain."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formateatua\n"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d zilindrotik %d zilindrora\n"
+msgid "Latin American"
+msgstr "Latinamerikarra"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Aldatu inprimatzeko sistema"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
+msgid "Old device file"
+msgstr "Gailu fitxategi zaharra"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Tamaina: %s"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Hasi: %s sektorea\n"
+msgid "Button `%s': %s"
+msgstr "`%s' botoia: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Name: "
-msgstr "Izena: "
+msgid "Please wait"
+msgstr "Itxaron mesedez"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS unitate-letra: %s (uste hutsa)\n"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Eginda"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Modeloa zuzena da"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s partizioa %s da orain"
+msgid "Ethernet Card"
+msgstr "Ethernet txartela"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "%s kentzen"
+msgid "Info"
+msgstr "Informazioa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Copying %s"
-msgstr "%s kopiatzen"
+msgid "Install"
+msgstr "Instalatu"
-#: ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Egin klik \"Ados\" botoian disko gogor honetako datu eta partizio guztiak\n"
+"ezabatu nahi badituzu. Kontuz ibili, \"Ados\" sakatu ondoren, ezin izango\n"
+"duzu disko gogor honetako daturik eta partiziorik berreskuratu, Windows-eko\n"
+"datuak barne.\n"
+"\n"
+"Egin klik \"Utzi\" botoian disko gogor honetako daturik eta partiziorik\n"
+"galdu gabe eragiketa hau bertan behera uzteko."
+
+#: ../../steps.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Fitxategiak partizio berrira eramaten"
+msgid "Exit install"
+msgstr "Irten instalaziotik"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-" %s direktorioak baditu datu batzuk\n"
-"(%s)"
+"Dena konfiguratu da.\n"
+"Orain Interneteko konexioa konparti dezakezu sare lokaleko beste ordenagailu "
+"batzuekin, sare-konfigurazio automatikoa (DHCP) erabiliz."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Ezkutatu fitxategiak"
+msgid "Remote CUPS server"
+msgstr "Urruneko CUPS zerbitzaria"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Eraman fitxategiak partizio berrira"
+msgid "Sun - Mouse"
+msgstr "Sun - Sagua"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"%s partizioa formateatu ondoren, partizioko datu guztiak galdu egingo dira"
+"Sare-moldagailu konfiguratu bakarra dago zure sisteman:\n"
+"\n"
+"%s\n"
+"\n"
+"Zure sare lokala moldagailu horrekin konfiguratzera noa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Berrabiarazi egin beharko duzu aldaketek eragina izan dezaten"
+msgid "Minimal install"
+msgstr "Gutxieneko instalazioa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s unitatearen partizio-taula diskoan idatziko da!"
+msgid "Ethiopia"
+msgstr "Etiopia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "%s paketea behar da. Instalatu nahi duzu?"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Nolako partizioa?"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci gailuak: txartela honen PCI zirritua, gailua eta funtzioa ematen du\n"
+"- eide gailuak: gailua nagusia edo morroia da\n"
+"- scsi gailuak: scsi busa eta scsi gailu id-ak"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Kontuz ibili: eragiketa hau arriskutsua da."
+msgid "Total size: %d / %d MB"
+msgstr "Guztira: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "zatiaren tamaina"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "desgaitu"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "maila"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Inprimagailu erabilgarriak"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "device"
-msgstr "gailua"
+msgid "Disabling servers..."
+msgstr "Zerbitzariak desgaitzen..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Various"
-msgstr "Hainbat"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Aukeratu babeskopiak egiteko \n"
+"maiztasuna"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mount options"
-msgstr "Muntatze-aukerak"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%sren instalazioak huts egin du. Errore hau gertatu da:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Fitxategia badago lehendik ere. Erabili?"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Ezin da mkinitrd -f /boot/initrd-%s.img %s jaurti."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-"Fitxategi hau beste atzera-begizta batek erabiltzen du, aukeratu beste bat"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Give a file name"
-msgstr "Eman fitxategi-izen bat"
+"Zerbitzari hau(ek) hautatu d(it)uzu: %s\n"
+"\n"
+"\n"
+"Zerbitzari horiek lehenespenez aktibatzen dira. Ez dute segurtasun-arazo "
+"ezagunik,\n"
+"baina berriren bat ager liteke. Kasu horretan, ziurtatu ahal bezain laster\n"
+"eguneratzen duzula.\n"
+"\n"
+"\n"
+"Zerbitzari horiek benetan instalatu nahi dituzu?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Fitxategi-sistemaren mota: "
+msgid "Network printer (TCP/Socket)"
+msgstr "Sareko inprimagailua (TCP/socket-a)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size in MB: "
-msgstr "Tamaina MBtan: "
+msgid "Backup User files..."
+msgstr "Erabiltzaile-fitxategien babeskopia... "
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Atzera-begiztako fitxategi-izena: "
+msgid "Install system"
+msgstr "Instalatu sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Loopback"
-msgstr "Atzera-begizta"
+msgid "First DNS Server (optional)"
+msgstr "Lehen DNS zerbitzaria (aukerakoa)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Partizio hau ezin da atzera-begiztarako erabili"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
+"fitxategi-izena"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM izena?"
+msgid "dhcpd Config..."
+msgstr "dhcpd Ezarpena..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "new"
-msgstr "berria"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Konfigurazioa eginda dago, baina orain desgaituta dago."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Aukeratu lehendik dagoen LVM bat gehitzeko"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub instalazioa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Aukeratu lehendik dagoen RAID bat gehitzeko"
+msgid "Israeli"
+msgstr "Israeldarra"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Moving partition..."
-msgstr "Partizioa lekuz aldatzen..."
+msgid "load setting"
+msgstr "kargatzeko ezarpenak"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving"
-msgstr "Lekuz aldatzen"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "\"%s\" inprimagailua \"%s\" zerbitzarian"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Zein sektoretara eraman nahi duzu?"
+msgid "Floppy can be removed now"
+msgstr "Disketea kendu dezakezu orain"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Sector"
-msgstr "Sektorea"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Gutxieneko instalazioa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Zein diskotara eraman nahi duzu?"
+msgid "Denmark"
+msgstr "Danimarka"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Lekuz aldatu"
+msgid "Moving partition..."
+msgstr "Partizioa lekuz aldatzen..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "New size in MB: "
-msgstr "Tamaina berria MBtan: "
+msgid "(This) DHCP Server IP"
+msgstr "DHCP zerbitzariaren IPa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Aukeratu tamaina berria"
+msgid "Test of the configuration"
+msgstr "Konfigurazioaren proba"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Aldatu tamaina"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Paketeak instalatzen..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"%s partizioa tamainaz aldatu ondoren, partizioko datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Partizio honetako datu guztiek babeskopia eduki beharko lukete"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Partizio honi ezin zaio tamaina aldatu"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT fitxategi-sistemaren mugak kalkulatzen"
+"Azkenik, pakete indibidualak hautatu ala ez aukeraren arabera, pakete\n"
+"guztiak taldetan eta azpitaldetan sailkatuta dituen zuhaitz bat aurkeztuko\n"
+"zaizu. Zuhaitza arakatuz, talde osoak, azpitaldeak nahiz pakete\n"
+"indibidualak hautatu ahal izango dituzu.\n"
+"\n"
+"Zuhaitzean pakete bat hautatzen duzun bakoitzean, azalpen bat agertuko da\n"
+"eskuinean. Hautapena amaitutakoan, egin klik \"Instalatu\" botoian, eta\n"
+"instalazio-prozesua abiaraziko da. Zure hardwarearen abiaduraren arabera\n"
+"eta instalatu behar diren paketeen kopuruaren arabera, denbora beharko da\n"
+"prozesua burutzeko. Dena instalatzeko behar duen denboraren estimazioa\n"
+"pantailan bistaratzen da, kafetxo bat hartzeko astirik ote duzun jakin\n"
+"dezazun.\n"
+"\n"
+"!! Zerbitzari-pakete bat hautatu baduzu, nahita edo talde oso baten zati\n"
+"zelako, zerbitzari horiek benetan instalatu nahi dituzun berresteko\n"
+"eskatuko zaizu. Mandrake Linux-en, instalatutako zerbitzari oro\n"
+"lehenespenez abiarazten da abioan. Seguruak diren arren eta banaketa\n"
+"argitaratu zen unean arazorik sortu ez bazuten ere, gerta liteke\n"
+"segurtasun-hutsuneak aurkitzea Mandrake Linux-en bertsio hau bukatu\n"
+"ondoren. Zerbitzu jakin batek zer egin behar duen edo zergatik instalatzen\n"
+"den ez badakizu, hautatu \"Ez\". \"Bai\" sakatzean zerrendatutako\n"
+"zerbitzuak instalatuko dira, eta lehenespen gisa automatikoki abiaraziko\n"
+"dira. !!\n"
+"\n"
+"\"Mendekotasun automatikoak\" aukerak, instalatzaileak pakete bat\n"
+"automatikoki hautatzen duenean agertzen den abisu-elkarrizketa desgaitzen\n"
+"du. Hori gertatzen da instalazioa behar bezala osatzeko, beste pakete\n"
+"batekiko mendekotasuna bete behar duela erabaki duelako instalatzaileak.\n"
+"\n"
+"Zerrendaren beheko aldean dagoen disketearen ikono txikiak aurreko\n"
+"instalazio batean aukeratutako pakete-zerrenda kargatzeko aukera ematen du.\n"
+"Ikono horretan klik egitean, beste instalazio baten bukaeran sortu zenuen\n"
+"diskete bat sartzeko eskatuko zaizu. Ikus diskete hori sortzeko moduari\n"
+"buruzko azken urratsaren bigarren iradokizuna."
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Non muntatu nahi duzu %s?"
+msgid "Choose your filesystem encryption key"
+msgstr "Aukeratu fitxategi-sistema enkriptatzeko gakoa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"Ezin da muntatze-puntuaren ezarpena kendu, partizio hau atzera-begiztarako "
-"erabiltzen delako\n"
-"Kendu atzera-begizta lehendabizi"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Non muntatu nahi duzu %s gailua?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Non muntatu nahi duzu %s atzera-begiztako fitxategia?"
+"Mesedez hautatu zure CD/DVD gailua\n"
+"(Sartu sakatu ezarpenak beste eremu batzutara hedatzeko.\n"
+"Eremu hau ez da beharrezkoa, formularioa betetzeko tresna bakarrik.)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "ext2tik ext3ra aldatzen"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Zein fitxategi-sistema nahi duzu?"
+msgid "Sierra Leone"
+msgstr "Sierra Leona"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Aldatu partizio-mota"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizio-mota aldatu ondoren, partizio honetako datu guztiak galdu egingo "
-"dira"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (jatorrian: %s)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Atzera-begiztako fitxategia kendu?"
+msgid "Alternative test page (Letter)"
+msgstr "Proba-orri alternatiboa (Letter)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"Ezin duzu partizio berria sortu\n"
-"(izan daitezkeen partizio primario kopuru handiena duzulako).\n"
-"Lehenik ezabatu partizio primario bat eta sortu partizio hedatu bat."
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "Hobespena: "
+"DHCP Zerbitzari Konfigurazioa.\n"
+"\n"
+"Hemen DHCP zerbitzari konfiguraziorako aukera desberdinak hautatu "
+"ditzakezu.\n"
+"Aukera baten esanahia ulertzen ez baduzu, utzi dagoen bezela.\n"
+"\n"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start sector: "
-msgstr "Hasierako sektorea: "
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Aukeratu X zerbitzaria"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Sortu partizio berria"
+msgid "Swap partition size in MB: "
+msgstr "Swap partizioaren tamaina MBtan: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use for loopback"
-msgstr "Erabili atzera-begiztarako"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
+"Beste (drakbackup ez)\n"
+"giltzak bere tokian dagoeneko"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Modify RAID"
-msgstr "Aldatu RAID"
+msgid "No changes to backup!"
+msgstr "Ez dago babestu beharreko aldaketarik!"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Kendu LVMtik"
+msgid "Formatted\n"
+msgstr "Formateatua\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Kendu RAIDetik"
+msgid "Type of install"
+msgstr "Instalazio-mota"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Gehitu LVMri"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "\"%s\" inprimagailua \"%s\" SMB/Windows zerbitzarian"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Gehitu RAIDi"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Daemon-ean (%s) sartzen da :\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Format"
-msgstr "Formateatu"
+msgid "%d comma separated numbers"
+msgstr "komaz banaturiko %d zenbaki"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Informazio xehea"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"rusers protokoloak sare bateko erabiltzaileei beste makina batzuetan\n"
+"nor sartzen den identifikatzeko aukera ematen die."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Partizio-taula berreskuratzen saiatzen"
+msgid "Automatic Steps Configuration"
+msgstr "Urrats automatikoen konfigurazioa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Sartu diskete bat unitatean\n"
-"Disketeko datu guztiak galdu egingo dira"
+"Iturburu Irekiaren Komunitateari buruz gehiago jakin nahi? Sar zaitez "
+"software librearen munduan!"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Warning"
-msgstr "Kontuz"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select file"
-msgstr "Hautatu fitxategia"
+msgid "Please select data to backup..."
+msgstr "Hautatu babeskopia egiteko datuak..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Babeskopiako partizio-taulak ez du tamaina bera\n"
-"Jarraitu hala ere?"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "Euskarri aldagarrien automuntatzea"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Reload partition table"
-msgstr "Birkargatu partizio-taula"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Berreskuratu partizio-taula"
+msgid "received"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Restore partition table"
-msgstr "Leheneratu partizio-taula"
+msgid "/File/_New"
+msgstr "/Fitxategia/_Berria"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Save partition table"
-msgstr "Gorde partizio-taula"
+msgid "The DNS Server IP"
+msgstr "DNS Zerbitzariaren IP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "IP Range End:"
msgstr ""
-"Partizio gehiago edukitzeko, ezabatu horietako bat partizio hedatu bat sortu "
-"ahal izateko"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Ezin da partizio gehiago gehitu"
+msgid "High"
+msgstr "Handia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Lehen mailako partizio guztiak erabilita daude"
+msgid "NoVideo"
+msgstr "BideorikEz"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "Disko gogorraren informazioa"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "eremu honek gailua deskribatzen du"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Auto-esleitu"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Star Office/OpenOffice.org/GIMP-n inprimagailua gehitzen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Garbitu dena"
+msgid "Local Printers"
+msgstr "Inprimagailu lokalak"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "/etc/fstab aldaketak gorde nahi dituzu?"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Irten partizio-taula idatzi gabe?"
+msgid "NIS Server"
+msgstr "NIS zerbitzaria"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Irten gorde gabe"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Ataka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Jarraitu hala ere?"
+msgid "Spain"
+msgstr "Espainia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Aldatu aditu modura"
+msgid "This user name has already been added"
+msgstr "Erabiltzaile-izen hau gehituta dago jadanik"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Aldatu modu normalera"
+msgid "Choose a file"
+msgstr "Aukeratu fitxategi bat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Undo"
-msgstr "Desegin"
+msgid "Apply"
+msgstr "Aplikatu"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Auto-detektatuta"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Exit"
-msgstr "Irten"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Interneteko konexioa konpartitzea desgaituta dago orain"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Aukeratu partizio bat"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../diskdrake/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "Aukeratu beste partizio bat"
+msgid "Belgium"
+msgstr "Belgika"
-#: ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Change type"
-msgstr "Aldatu mota"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Search servers"
-msgstr "Bilatu zerbitzarietan"
+msgid "Choose the window manager to run:"
+msgstr "Aukeratu exekutatu beharreko leiho-kudeatzailea:"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain"
-msgstr "Domeinua"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Username"
-msgstr "Erabiltzaile-izena"
+msgid "First Time Wizard"
+msgstr "Lehen Aldikorako Morroia"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Mesedez sartu zure erabiltzaile-izena, pasahitza eta domeinu izena ostalari "
-"honetara sartzeko."
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domeinu Autentifikazioa Behar da"
+"Errore bat gertatu da, baina ez dakit behar bezala maneiatzen.\n"
+"Jarraitu zure ardurapean."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Another one"
-msgstr "Beste bat"
+msgid "please wait, parsing file: %s"
+msgstr "itxaron, fitxategia analizatzen: %s"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Which username"
-msgstr "Zein Erabiltzaile-izena"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Thailandia"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Ezin sartu %s erabiltzaile-izena erabilita (pasahitz okerra?)"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "cpu # "
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
+"Lexmark inkjet eta konfigurazio honekin inprimatu ahal izateko, Lexmark-ek "
+"emandako inkjet inprimagailu-gidariak behar dituzu (http://www.lexmark."
+"com/). Klikatu \"Drivers\" estekan. Gero aukeratu eredua eta ondoren \"Linux"
+"\" sistema eragile gisa. Gidariak RPM pakete gisa edo instalazio grafiko "
+"interaktiboa duten shell script gisa egoten dira. Ez da beharrezkoa "
+"konfigurazio hau bitarteko grafikoen bidez egitea. Ezeztatu zuzenean "
+"lizentzia-kontratuaren ondoren. Gero inprimatu inprimatze-burua lerrokatzeko "
+"orriak \"lexmarkmaintain\"ekin eta doitu burua lerrokatzeko ezarpenak "
+"programa honekin."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Permissions"
+msgstr "Baimenak"
-#: ../../harddrake/data.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "USB controllers"
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "Hornitzailearen izena (adib. hornitzailea.net)"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "Bertsioa: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"Sistemak baliabide gutxi ditu. Arazoak izan ditzakezu Mandrake \n"
+"Linux instalatzeko. Horrela bada, testu-instalazioa egiten saia zaitezke. "
+"Horretarako,\n"
+"sakatu `F1' CDROMetik abiaraztean, gero sartu `text'."
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "Erabili Windows partizioa atzera-begiztarako"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Hautatu eskaner bat"
-
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Ezezaguna|Generikoa"
+msgid "Armenian (typewriter)"
+msgstr "armeniarra (idazmakina)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Eredua"
+msgid "Connection type: "
+msgstr "Konexio-mota: "
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet txartela"
+msgid "Graphical interface"
+msgstr "X abioan"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s 3D hardware-azelerazioarekin"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "India"
+msgstr "India"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Soinu-txartela"
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr "Txad"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Beste euskarri bat"
+#: ../../lang.pm:1
+#, c-format
+msgid "Slovakia"
+msgstr "Eslovakia"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "Telebista-txartela"
+#: ../../lang.pm:1
+#, c-format
+msgid "Singapore"
+msgstr "Singapur"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Bideo modua"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cambodia"
+msgstr "Kanbodia"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Tape"
-msgstr "Zinta"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitorearen SinkHoriz: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Path"
+msgstr "Bidea"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CD/DVD burners"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "CDROM"
-msgstr "CDROMean"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Daniarra"
-
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zip"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
+"(%s) inprimatze-sistema ez da automatikoki hasiko makina abiarazten denean.\n"
+"\n"
+"Baliteke abiarazte automatikoa desaktibatuta egotea segurtasun-maila "
+"handiagora aldatu delako, eta inprimatze-sistema eraso-gune potentziala "
+"delako.\n"
+"\n"
+"Inprimatze-sistema automatikoki hastea berriro aktibatu nahi duzu?"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Abiapen Disketea"
-
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
+"%s inprimagailua\n"
+"Zer da inprimagailu honetan aldatu nahi duzuna?"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "Gidaria:"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Gehitu erabiltzailea"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8791,160 +8960,99 @@ msgid ""
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"Erabiltzaileei beraien direktorioetako batzuk elkarbanatzen utzi nahi "
+"zenieke?\n"
+"Baimena ematen baduzu konqueror eta nautilus-en \"Elkarbanatu\" gainean klik "
+"eginez egin ahalko dute.\n"
+"\n"
+"\"Pertsonalizatua\" erabiliz erabiltzaile bakoitzarentzako ezarpena zehaztu "
+"daiteke.\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
+"Aukeratu pakete-hautapena disketean kargatzea edo gordetzea.\n"
+"Formatua instalazio automatikoa egiteko sortutako disketeena bezalakoa da."
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Ez dago zure soinu txartelarentzako gidari ezagunik (%s)"
-
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Unkown driver"
-msgstr "Gidari ezezaguna"
+msgid "China (broadcast)"
+msgstr "Txina (bcast)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Ez dago zure soinu txartelarentzako gidari ezagunik (%s)"
+msgid "Use quota for backup files."
+msgstr "Erabili kuota babeskopia-fitxategientzat"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Ez dago gidari ezagunik"
-
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Ez dago OSS/ALSA gidari alternatibo ezagunik zure (%s) soinu "
-"txartelarentzat, orain \"%s\" erabiltzen du"
-
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "No open source driver"
-msgstr "Ez dago gidari ezagunik"
+msgid "Configuring printer \"%s\"..."
+msgstr "\"%s\" inprimagailua ezartzen..."
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Itxaron... Konfigurazioa aplikatzen"
+msgid "Internet connection"
+msgstr "Interneteko konexioa"
-# unloading : deskargatu ???? zama????
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"\"%s\" gidari zaharra zerrenda beltzean dago.\n"
-"\n"
-"Kerneletik deskargatzerakoan arazoak sortzen dituela txostendu da.\n"
-"\n"
-"\"%s\" gidari berria hurrengo bootstrap-ean erabiliko da soilik."
+"Huts egin du %s modulua kargatzean.\n"
+"Beste parametro batzuekin saiatu nahi duzu berriro?"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Welcome to the Open Source world."
+msgstr "Ongi etorri iturburu irekiaren mundura"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) izan zen lehenengo soinu API. Soinu API hau ez da SE-"
-"aren menpekoa (unix sistema gehienetan eskuragarri dago) baino oso API xume "
-"eta mugatua da.\n"
-"Gainera, OSS gidari guztiek gurpila berrasmatzen dute.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) arkitektura modularra da, \n"
-"ISA, USB eta PCI txartel multzo zabalari euskarri ematen diona.\n"
-"\n"
-"Askogatik OSS-k baino maila handiagoko API hornitzen du.\n"
-"\n"
-"ALSA erabiltzeko, batek bitako edozein erabil dezake:\n"
-"- OSS-rekin bateragarri den api zaharra.\n"
-"- Ezaugarri hedatu ugari eskaintzen dituen ALSA api berria, ALSA liburutegia "
-"erabili behar da.\n"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia Herzegovina"
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"\n"
-"\n"
-"Zure txartelak orain %s\"%s\" gidaria erabitzen du (zure txartelarentzako "
-"gidari lehenetsia \"%s\" da)"
+"Egiazko fitxategi-sistema (ext2/ext3, reiserfs, xfs, or jfs) behar duzu "
+"muntatze-puntu honentzako\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Idatzi ostalariaren izena edo IPa."
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Hemen gidari alternatibo bat hautatu dezakezu (OSS edo ALSA) zure soinu "
-"txartelarentzat (%s)"
+msgid "Netherlands"
+msgstr "Herbehereak"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Fitxategiak bidaltzen..."
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "Soinu konfigurazioa"
+msgid "Internal ISDN card"
+msgstr "Barneko ISDN txartela"
#: ../../harddrake/sound.pm:1
#, c-format
@@ -8955,1684 +9063,1679 @@ msgstr ""
"Ez dago OSS/ALSA gidari alternatibo ezagunik zure (%s) soinu "
"txartelarentzat, orain \"%s\" erabiltzen du"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr "Ez dago gidari alternatiborik"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Taula"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "enable radio support"
-msgstr "irrati euskarria gaitu"
+msgid "Install & convert Fonts"
+msgstr "Instalatu eta bihurtu letra-tipoak"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Radio support:"
-msgstr "Irrati euskarria :"
+msgid "WARNING"
+msgstr "ADI"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL ezarpenak :"
+msgid "Installing bootloader"
+msgstr "Abioko kargatzailea instalatzen"
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "mmap erabiliz eskuratzerako eskuratze buffer kopurua"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "Errepikatu"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Eskuratze buffer kopurua :"
+msgid "detected %s"
+msgstr "%s detektatua"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Sintonizatzaile mota :"
+msgid "Virgin Islands (U.S.)"
+msgstr "Birjina Uharteak (Amerikarrak)"
-#: ../../harddrake/v4l.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Txartela modeloa :"
+msgid "Bad backup file"
+msgstr "Babeskopia txarra"
-#: ../../harddrake/v4l.pm:1
-#, c-format
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"TB txartela moderno gehienentzako, GNU/Linux kernelaren bttv moduloak "
-"parametro egokiak auto-detektatzen ditu.\n"
-"Zure txartela ez bada egokiro detektatzen, sintonizatzaile eta txartela mota "
-"egokiak behartu ditzakezu hemen. Hautatu zure tb parametro egokiak "
-"beharrezkoa bada"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Ezezaguna|Generikoa"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Ezezaguna|CPH06X (bt878) [saltzaile ugari]"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Ezezaguna|CPH05X (bt878) [saltzaile ugari]"
+"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
+"Desgaituta dago orain.\n"
+"\n"
+"Zer egin nahi duzu?"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Auto-detektatu"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
-#: ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Bera"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Zure aukera? (%s lehenetsia) "
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Aukera okerra, saiatu berriro\n"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Re-submit"
-msgstr "Berriro bidali"
+msgid "Pipe into command"
+msgstr "Kanalizatu lana komando batean"
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-"=> Kontuz, etiketa bat aldatu da:\n"
-"%s"
+"Zure ordenagailuko hardware batzuek kontrolatzaile ``jabea'' behar dute.\n"
+"Horiei buruzko informazioa hemen aurki dezakezu: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Aukeratu editatu nahi duzun 10 barrutiko lehen zenbakia,\n"
-"edo sakatu Sartu, jarraitzeko.\n"
-"Zure aukera? "
+msgid "Detecting devices..."
+msgstr "Gailuak detektatzen..."
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hainbat gauza dituzu aukeran (%s).\n"
+msgid "Click here to launch the wizard ->"
+msgstr "Egin klik hemen morroia abiarazteko ->"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Zure aukera? (lehenetsia: `%s'%s) "
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " sartu 'void' sarrera hutsa jartzeko"
+msgid ""
+"Description of the fields:\n"
+"\n"
+msgstr ""
+"Eremuen deskribapena:\n"
+"\n"
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Botoi honetan klik egin nahi duzu?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "gailuaren saltzaile izena"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "`%s' botoia: %s"
+msgid "Refreshing printer data..."
+msgstr "Inprimagailuaren datuak freskatzen..."
-#: ../../interactive/stdio.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Zure aukera? (0/1, lehenetsia `%s' da) "
+msgid "You must also format %s"
+msgstr "%s ere formateatu behar duzu"
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Zuk bete beharreko sarrerak:\n"
-"%s"
+msgid "Be careful: this operation is dangerous."
+msgstr "Kontuz ibili: eragiketa hau arriskutsua da."
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Huts egin du %s modulua kargatzean.\n"
-"Beste parametro batzuekin saiatu nahi duzu berriro?"
+msgid "Insert a floppy containing package selection"
+msgstr "Sartu pakete-hautapena daukan diskete bat"
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Zehaztu aukerak"
+msgid "Server: "
+msgstr "Zerbitzaria: "
-#: ../../modules/interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Autoprobe"
-msgstr "Autoproba"
+msgid "Security Alerts:"
+msgstr "Segurtasun Alertak:"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kasu batzuetan, %s kontrolatzaileak informazio gehigarria behar du egoki \n"
-"funtzionatzeko, nahiz eta normalki hori gabe ongi funtzionatzen duen. Aukera "
-"gehigarriak zehaztu \n"
-"nahi dituzu, edo kontrolatzaileari zure makina probatzen\n"
-"utzi, behar duen informazioa bilatzeko? Batzuetan, probatzeak ordenagailua "
-"blokeatuko du, baina\n"
-"horrek ez luke kalterik egin beharko."
+msgid "Sweden"
+msgstr "Suedia"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Zein %s kontrolatzaile probatu behar dut?"
+msgid "Use Expect for SSH"
+msgstr "Erabili Expect SSH-rentzako"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Modulu-aukerak:"
+msgid "Poland"
+msgstr "Polonia"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Orain %s moduluari bere aukerak eman diezazkiokezu.\n"
-"Aukerak ``izena=balioa izena2=balioa2 ...'' formatuan daude.\n"
-"Adibidez, ``io=0x300 irq=7''"
+msgid "Importance: %s\n"
+msgstr "Garrantzia: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "Please check if you want to eject your tape after the backup."
msgstr ""
-"Orain %s moduluaren aukerak ezarri ditzakezu\n"
-"Ohartu sartzen den edozein helbide 0x aurrizkiarekin jarri behar dela, adib. "
-"'0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modulua)"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "Installing driver for %s card %s"
-# #msgstr "%2$s %1$s txartelaren kontrolatzailea instalatzen"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s %s txartelaren kontrolatzailea instalatzen"
+"Mesedez markatu babes-kopia ondoren zure zinta kanporatzea nahi baduzu."
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "See hardware info"
-msgstr "Ikus hardwarearen informazioa"
+msgid "Other ports"
+msgstr "Beste portu batzu"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ba duzu %s interfazerik?"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "mmap erabiliz eskuratzerako eskuratze buffer kopurua"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Baduzu besterik?"
+msgid "SMBus controllers"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaze aurkitu dira"
+msgid "Connection timeout (in sec)"
+msgstr "Konexioaren denbora-muga (segundotan)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Moduluaren parametro bakoitza konfiguratu dezakezu hemen."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "komaz banaturiko karaktere-hilarak"
+msgid "Croatian"
+msgstr "Kroaziarra"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated numbers"
-msgstr "komaz banaturiko zenbakiak"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Lehendik dagoen partizioa erabili"
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr "komaz banaturiko %d karaktere-hilara"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Ezin da bikoiztu: %s"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "komaz banaturiko %d zenbaki"
+msgid "/Help/_About..."
+msgstr "/Laguntza/_Honi buruz..."
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "a number"
-msgstr "zenbaki bat"
+msgid "Remove user directories before restore."
+msgstr "Kendu erabiltzaile-direktorioak leheneratu aurretik."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
+"Urruneko inprimagailu bat konfiguratzera zoaz. Sarerako sarbidea behar duzu "
+"horretarako, baina sarea konfiguratu gabe dago. Aurrera jarraitzen baduzu "
+"sarea konfiguratu gabe, ezin izango duzu orain konfiguratzen ari zaren "
+"inprimagailua erabili. Zer egin nahi duzu?"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl-rekin konektatzeko modurik ohikoena pppoe da.\n"
-"Konexio batzuek pptp erabiltzen dute, bakan batzuek dhcp.\n"
-"Ez badakizu, aukeratu 'erabili pppoe'"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "OKI winprinter-en konfigurazioa"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Konektatu Internetekin"
+msgid "could not find any font in your mounted partitions"
+msgstr "ezin izan da letra-tiporik aurkitu muntatutako partizioetan"
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "F00f bug"
msgstr ""
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "erabili dhcp"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "use pptp"
-msgstr "erabili pptp"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Zein dhcp bezero erabili nahi duzu?\n"
+"Lehenetsia dhcp-client da"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "erabili pppoe"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domeinu-izena:"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Other ports"
-msgstr "Beste portu batzu"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Abiapen Disketea"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Guztia (suhesirik gabe)"
+msgid "Restore"
+msgstr "Leheneratu"
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-"Portu onartezina: %s.\n"
-"Formatu egokiak \"portua/tcp\" edo \"portu/udp\" dira,\n"
-"non portua 1 eta 65535 artean dagoen."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Beste portu batzu sartu ditzakezu.\n"
-"Adibide onargarriak dira: 139/tcp 139/udp.\n"
-"Begiratu /etc/services informazioa jasotzeko."
+msgid "Looking for available packages..."
+msgstr "Pakete erabilgarriak bilatzen"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Zein zerbitzuetara konektatzen utzi nahi duzu Internetetik?"
+msgid "Init Message"
+msgstr "Hasierako mezua"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall konfiguratzailea\n"
-"\n"
-"Zure Sare/Internet sarbidea drakconnect erabiliz konfiguratu duzula\n"
-"ziurtatu aurrera egin aurretik."
+msgid "Rescue partition table"
+msgstr "Berreskuratu partizio-taula"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"drakfirewall konfiguratzailea\n"
-"\n"
-"Honek Mandrake Linux makina honentzako suhesi pertsonala konfiguratzen du.\n"
-"Suhesi izatera zuzendutako soluzio ahaltsua nahi baduzu, mesedez begiratu\n"
-"MandrakeSecurity Firewall banaketa espezializatua."
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Konexioaren abiadura"
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network card"
-msgstr "Ez dago sare-txartelik"
+msgid "Cyprus"
+msgstr "Zipre"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP eta IMAP Zerbitzaria"
+msgid "Remove from RAID"
+msgstr "Kendu RAIDetik"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "Posta Zerbitzaria"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Enkriptatze-gako hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Domeinuko Izen Zerbitzaria"
+msgid "Configuration Wizards"
+msgstr "Ezarpen Morroia"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Web Zerbitzaria"
+msgid "ISDN connection"
+msgstr "ISDN konexioa"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "primary"
+msgstr "lehenengo mailakoa"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Host name"
-msgstr "Ostalari-izena"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "\"%s\" SMB/Windows zerbitzarian, elkarbanatu \"%s\""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Ostalari-izena"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Orain abioan zein zerbitzu abiaraztea nahi duzun aukera dezakezu.\n"
+"\n"
+"Hemen uneko instalazioan erabilgarri dauden zerbitzu guztiak ageri dira.\n"
+"Azter itzazu arretaz eta kendu hautatze-marka abiaraztean beti behar ez\n"
+"direnei.\n"
+"\n"
+"Zerbitzu jakin bat hautatuz, zerbitzu horri buruzko azalpen-testu labur bat\n"
+"eskuratuko duzu. Hala ere, zerbitzu bat erabilgarria den ala ez ziur ez\n"
+"bazaude, seguruagoa da jokabide lehenetsia uztea.\n"
+"\n"
+"!! Etapa honetan, oso kontuz ibili zure makina zerbitzari gisa erabiltzeko\n"
+"asmoa baduzu: seguru asko ez duzu behar ez duzun zerbitzurik abiarazi nahi\n"
+"izango. Gogoan izan zerbitzu batzuk arriskutsuak izan daitezkeela\n"
+"zerbitzari batean gaitzen badira. Oro har, benetan behar dituzun zerbitzuak\n"
+"soilik hautatu. !!"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Sarea konfiguratzen"
-
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr ""
-"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
+msgid "Skip"
+msgstr "Saltatu"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Aukeratu sare-interfazea"
+msgid "Niue"
+msgstr "Niue"
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu.\n"
-"Ezin dut konexio-mota hau konfiguratu."
+"Abioan hasteko konfiguratuta dauden sare-interfaze guztiak\n"
+"aktibatzen/desaktibatzen ditu."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Zein dhcp bezero erabili nahi duzu?\n"
-"Lehenetsia dhcp-client da"
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ez da ISDN PCI txartelik aurkitu. Hautatu bat hurrengo pantailan."
+msgid "important"
+msgstr "garrantzitsua"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"ISDN PCI txartel bat detektatu dut, baina ez dakit zein motatakoa den. "
-"Hautatu PCI txartel bat hurrengo pantailan."
+msgid "Total Progress"
+msgstr "Guztizko progresioa"
-#: ../../network/isdn.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Zein da zure ISDN txartela?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurazioa"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Abortatu"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Jarraitu"
-
-#: ../../network/isdn.pm:1
-#, c-format
msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"DrakXk zure ordenagailuan dagoen edozein IDE gailu detektatzen du orain.\n"
+"Zure sisteman PCI SCSI txartel bat edo gehiago dagoen ikusteko ere\n"
+"eskaneatuko du. SCSI txartel bat aurkitzen badu, DrakXk automatikoki\n"
+"instalatuko du kontrolatzaile egokia.\n"
"\n"
-"ISA txartela baduzu, hurrengo pantailako balioek zuzenak izan behar dute.\n"
+"Hardwarearen detekzioak batzuetan hardwareren bat ezingo duenez detektatu,\n"
+"DrakXk PCI SCSI txartelik ote dagoen berresteko eskatuko dizu. Sakatu\n"
+"\"Bai\" zure makinan SCSI txartel bat instalatuta dagoela badakizu. SCSI\n"
+"txartelen zerrenda bat aurkeztuko zaizu, bertan aukeratzeko. Sakatu \"Ez\"\n"
+"SCSI hardwarerik ez baduzu. Ziur ez bazaude, zure ordenagailuan\n"
+"detektatutako hardware-zerrenda ikus dezakezu \"Ikus hardwareari buruzko\n"
+"informazioa\" hautatuz eta \"Ados\" sakatuz. Aztertu hardware-zerrenda eta\n"
+"egin klik \"Ados\" botoian SCSI interfazearen galderara itzultzeko.\n"
"\n"
-"PCMCIA txartela baduzu, txartelaren irq eta io jakin behar dituzu.\n"
+"Moldagailua eskuz zehaztu behar baduzu, DrakXk haren aukerak zehaztu nahi\n"
+"dituzun galdetuko dizu. Hardwareak hasieratzeko behar dituen aukera\n"
+"zehatzak bila ditzan, hardwarea aztertzen utzi beharko zenioke DrakXri.\n"
+"Horrek ondo funtzionatu ohi du.\n"
+"\n"
+"DrakXk pasatu behar diren aukerak egiaztatu ezin baditu, aukerak eskuz eman\n"
+"beharko dizkiozu kontrolatzaileari. Eskatutako parametroak\n"
+"fabrikatzailearen web orritik (Interneteko sarbidea baduzu) edo Microsoft\n"
+"Windows-etik (hardware hau zure sisteman Windows-ekin erabili baduzu)\n"
+"eskuratzeko aholkuak lortzeko, ikus ``Erabiltzailearen gida'' (3.\n"
+"kapituluan, ``Zure hardwareari buruzko informazioa bildu'' atalean)."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "I don't know"
-msgstr "Ez dakit"
+msgid "Users"
+msgstr "Erabiltzaileak"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Abioko kargatzailea prestatzen"
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Nolako txartela duzu?"
+msgid "Gateway (e.g. %s)"
+msgstr "Atebidea (adib. %s)"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "\"%s\" interfazea bilatu da, erabili nahi duzu?"
+msgid "The passwords do not match"
+msgstr "Pasahitzak ez datoz bat"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Zein protokolo erabili nahi duzu?"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Munduko gainerako protokoloa"
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Munduko gainerako protokoloa \n"
-" D kanalik ez (linea alokatuak)"
+"Gordetako pakete-hautapen hau erabiltzeko, abiarazi instalazioa ``linux "
+"defcfg=floppy''rekin"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Europako protokoloa"
+msgid "the number of the processor"
+msgstr "aurrerapen-barraren kolorea"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europako protokoloa (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "Hardwarearen ordua GMTn ezarria"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Hautatu hornitzailea.\n"
-" Zerrendan ez badago, aukeratu Zerrendatu gabe"
+msgid "Give a file name"
+msgstr "Eman fitxategi-izen bat"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Kanpoko ISDN modema"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
-#: ../../network/isdn.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Barneko ISDN txartela"
+msgid "Change Cd-Rom"
+msgstr "Aldatu CDROMa"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Nolakoa da zure ISDN konexioa?"
+msgid "Paraguay"
+msgstr "Paraguai"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
-#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Sarea konfiguratzeko morroia"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Erabili babeskopia inkrementalak (ez ordeztu kopia zaharrak)"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurazio zaharra (isdn4net)"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Ez dago zure soinu txartelarentzako gidari ezagunik (%s)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurazio berria (isdn-light)"
+msgid "force"
+msgstr "behartu"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Zein ISDN konfigurazio duzu nahiago?\n"
-"\n"
-"* Konfigurazio zaharrak isdn4net erabiltzen du. Tresna ahaltsuak\n"
-" dauzka, baina korapilatsua da konfiguratzeko, eta ez da estandarra.\n"
-"\n"
-"* Konfigurazio berria errazagoa da ulertzeko, estandarragoa,\n"
-" baina tresna gutxiago ditu.\n"
-"\n"
-"Konfigurazio erraza gomendatzen dugu.\n"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "bat ez badatoz"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Instalatu"
+msgid "Exit"
+msgstr "Irten"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
+"OHARRA: Inprimagailu eredua eta inprimaketa sistemaren arabera %d MB-etik "
+"gora software gehigarri instalatuko da."
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Taula"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
+"Ez duzu interfaze konfiguraturik.\n"
+"Konfigura itzazu lehendabizi, 'Konfiguratu'n klik eginda"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Bigarren DNS zerbitzaria (aukerakoa)"
+msgid "Estonian"
+msgstr "Estoniarra"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Lehen DNS zerbitzaria (aukerakoa)"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache World Wide Web-eko zerbitzari bat da. HTML fitxategiak eta CGI "
+"zerbitzatzeko erabili ohi da."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Domain name"
-msgstr "Domeinu-izena:"
+msgid "Add/Del Clients"
+msgstr "Gehitu/Ezabatu Bezeroak"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "Aukeratu sare-interfazea"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Script-ean oinarritua"
+msgid "Unknown Model"
+msgstr "Modelo ezezaguna"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminalean oinarritua"
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Lehenespenez abiarazteko partizioa\n"
+" (MS-DOS abiorako, ez lilo-rako)\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Saio-hasierako ID"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "aukeratu irudi fitxategia"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Telefono-zenbakia"
+msgid "Firewalling configuration detected!"
+msgstr "Suebaki-konfigurazioa detektatu da!"
#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Konexio-izena"
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Telefonoz deitzeko aukerak"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Aukeratu modema konektatuta dagoen serieko ataka."
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Arazoak izan dira konfigurazioan zehar.\n"
-"Probatu konexioa net_monitor edo mcc bidez. Konexioak funtzionatzen ez badu, "
-"konfigurazioa berrabiarazi beharko duzu"
+"testu-laukiaren x koordenatua\n"
+"karaktere kopurutan"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ondoren, zure X ingurunea berrabiaraztea gomendatzen dugu,\n"
-"ostalari-izena aldatzearen arazoa saihesteko."
+msgid "Updating package selection"
+msgstr "Pakete-hautapena eguneratzen"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Zorionak, sarearen eta Interneten konfigurazioa amaitu da.\n"
-"\n"
-"Konfigurazioa zure sistemari aplikatuko zaio orain.\n"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Non muntatu nahi duzu %s atzera-begiztako fitxategia?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Arazo bat izan da sarea berrabiaraztean: \n"
-"\n"
-"%s"
+"Disketea behar bezala sortu da.\n"
+"Orain zure instalazioa errepika dezakezu."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Abioan hasi nahi duzu konexioa?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Interneteko konexioa"
+msgid "the number of buttons the mouse has"
+msgstr "aurrerapen-barraren kolorea"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Internetera konektatzeko modu bat baino gehiago konfiguratu duzu.\n"
-"Aukeratu erabili nahi duzuna.\n"
-"\n"
+"Mesedez sartu direktorioa (edo modulua) babes-kopia\n"
+" ostalari honetan jartzeko."
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Aukeratu konfiguratu nahi duzun konexioa"
+msgid "Replay"
+msgstr "Errepikatu"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet txartela(k) detektatuta"
+msgid "Backup other files"
+msgstr "Bestelako fitxategien babeskopia"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Sare lokaleko konexioa (LAN)"
+msgid "No floppy drive available"
+msgstr "Ez dago diskete-unitate erabilgarririk"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "cable connection detected"
-msgstr "kable bidezko konexioa detektatu da"
+msgid "Backup files are corrupted"
+msgstr "Babeskopien fitxategiak hondatuta daude"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cable connection"
-msgstr "Kable-konexioa"
+msgid "TV norm:"
+msgstr "TB araua :"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "%s detektatua"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL konexioa"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "detected %s"
-msgstr "%s detektatua"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituaniako AZERTY (berria)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN konexioa"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Modem-konexio normala"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected on port %s"
-msgstr "%s atakan detektatua"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Softwareko RAID partizio bat hautatu duzu erro gisa (/).\n"
+"Ez dago abioko kargatzailerik hori /boot partiziorik gabe erabil "
+"dezakeenik.\n"
+"Beraz, kontuan izan /boot partizioa gehitu behar duzula"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Modem-konexio normala"
+msgid "Previous"
+msgstr "Aurrekoa"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Gailuak detektatzen..."
+msgid "Other OS (MacOS...)"
+msgstr "Beste SE bat (MacOS...)"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Aditu modua"
+msgid "To activate the mouse,"
+msgstr "Sagua aktibatzeko,"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Erabili auto-detekzioa"
+msgid "Bringing up the network"
+msgstr "Sarea irekitzen"
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Aukeratu konfiguratzeko profila"
+msgid "Screenshots will be available after install in %s"
+msgstr ""
+"%s(e)n instalazioa egindakoan pantaila-argazkiak erabilgarri egongo dira"
-#: ../../network/netconnect.pm:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ongi etorri Sarea konfiguratzeko morroira\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
"\n"
-"Zure Internet/sare-konexioa konfiguratzera goaz.\n"
-"Ez baduzu auto-detekzioa erabili nahi, desautatu kontrol-laukia.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Sare-instalazioa egiten ari zarenez, zure sarea konfiguratuta dago jadanik.\n"
-"Hautatu Ados zure konfigurazioa mantentzeko, edo hautatu Utzi Internet eta "
-"Sare-konexioa birkonfiguratzeko.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"We are now going to configure the %s connection.\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
-"Press OK to continue."
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
+"Microsoft partizio bat baino gehiago detektatu da zure disko gogorrean.\n"
+"Aukeratu Mandrake Linux sistema eragile berria instalatzeko tamainaz aldatu\n"
+"nahi duzuna.\n"
"\n"
+"Partizio bakoitza honela zerrendatzen da: \"Linux izena\", \"Windows\n"
+"izena\" \"Edukiera\".\n"
"\n"
+"\"Linux izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko\n"
+"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
"\n"
-"%s konexioa konfiguratuko dugu orain.\n"
+"\"Disko gogorraren mota\" \"hd\" izango da disko gogorra IDE disko gogorra\n"
+"bada, eta \"sd\", SCSI unitatea bada.\n"
"\n"
+"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\" ren ondoko letra bat\n"
+"izaten da. IDE disko gogorretan:\n"
"\n"
-"Jarraitzeko, sakatu Ados."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "%s konexioa konfiguratuko dugu orain."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Interneteko konexioa eta konfigurazioa"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Konfiguratu konexioa"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Deskonektatu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Konektatu"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du;\n"
"\n"
-"You can reconfigure your connection."
-msgstr ""
+" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi\n"
+"du;\n"
"\n"
-"Konexioa birkonfigura dezakezu."
+" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
+"letrak \"bigarren SCSI ID baxuena\", etab.\n"
+"\n"
+"\"Windows izena\" Windows-en disko gogorraren letra da (lehen diskoak edo\n"
+"partizioak \"C:\" du izena)."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
msgstr ""
-"\n"
-"Internetekin konekta zaitezke, edo konexioa birkonfiguratu."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Orain ez zaude Internetekin konektatuta."
+msgid "Computing FAT filesystem bounds"
+msgstr "FAT fitxategi-sistemaren mugak kalkulatzen"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
"\n"
-"Deskonektatu egin zaitezke edo konexioa birkonfiguratu."
+"Babeskopien iturburua: \n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Orain Internetekin konektatuta zaude."
+msgid "Content of the file"
+msgstr "Fitxategiaren edukia"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URLaren hasieran 'ftp:' edo 'http:' egon behar da"
+msgid "Authentication LDAP"
+msgstr "LDAP autentifikazioa"
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy-ak http://... izan behar du"
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy-a"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profila: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy-a"
+msgid "transmitted"
+msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "Proxy-en konfigurazioa"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Bide hautaketa"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Atariaren helbidea 1.2.3.4 formatuan egon behar luke"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS zerbitzariaren helbidea 1.2.3.4 formatuan egon behar luke"
+msgid "%d comma separated strings"
+msgstr "komaz banaturiko %d karaktere-hilara"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Atebide-gailua"
+msgid "Here is the full list of keyboards available"
+msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Atebidea (adib. %s)"
+msgid "Theme name"
+msgstr "Gaiaren izena"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "DNS server"
-msgstr "DNS zerbitzaria"
+msgid "/_Help"
+msgstr "/_Laguntza"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Sartu zure ostalari-izena.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''.\n"
-"Atebidearen IP helbidea ere sar dezakezu, baldin baduzu"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "the width of the progress bar"
+msgstr "aurrerapen-barraren zabalera"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "Cook Islands"
+msgstr "Cook uharteak"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP helbideak 1.2.3.4 formatua izan behar du"
+msgid "Formatting partition %s"
+msgstr "%s partizioa formateatzen"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start at boot"
-msgstr "Abioan abiaraztekoa"
+msgid "Hostname required"
+msgstr "Ostalari-izena behar da"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Idatzi ostalariaren izena edo IPa."
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr "Desautatu instalatutako letra-tipoak"
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Cancel"
+msgstr "Utzi"
+
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Sare-konfigurazioa"
+msgid "Searching for configured scanners ..."
+msgstr "Inprimagailu erabilgarriak"
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Sare-txartelaren identifikazioa (eramangarrientzat baliagarria)"
+msgid "Wheel"
+msgstr "Gurpila"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Ostalari-izena"
+msgid "Videocard"
+msgstr "Bideo modua"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Netmask"
-msgstr "Sare-maskara"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tBabeskopietan erabili tar eta bzip2\n"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "IP address"
-msgstr "IP helbidea"
+msgid "Remove Selected"
+msgstr "Kendu hautatutakoak"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "/Autodetect _modems"
+msgstr "Auto-detektatuta"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP automatikoa"
+msgid "Remove printer"
+msgstr "Kendu inprimagailua"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (%s kontrolatzailea)"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"KONTUZ!\n"
+"\n"
+"DrakX Windows partizioari tamaina aldatzera doa. Kontuz ibili:\n"
+"eragiketa hau arriskutsua da. Inoiz ez baduzu horrelakorik egin, \n"
+"hobe izango duzu instalaziotik irten eta scandisk exekutatzea \n"
+"Windows-en (eta nahi izanez gero defrag); gero, hasi berriro \n"
+"instalazioarekin. Datuen babeskopia egitea ere komeni da.\n"
+"Ziur zaudenean, sakatu Ados."
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Sareko %s gailua konfiguratzen"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Zein zerbitzuetara konektatzen utzi nahi duzu Internetetik?"
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"Sartu makina honen IP konfigurazioa.\n"
-"Elementu bakoitza IP helbide gisa sartu behar da puntuz\n"
-"bereizitako zenbakizko notazioan (adibidez, 1.2.3.4)."
+"Ongi etorri posta konfiguratzeko utilitatera.\n"
+"\n"
+"Hemen zure alerta sistema ezarri ahal izango duzu.\n"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ABISUA: Gailu hau Internetera konektatzeko konfiguratu da aldez aurretik.\n"
-"Gailu hau konfiguratuta mantentzeko, onartu, besterik gabe.\n"
-"Ondoko eremuak aldatzen badituzu konfigurazio hau gainidatziko da."
+msgid "Other"
+msgstr "Bestelakoa"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Kontuz! Lehendik dagoen suebaki-konfigurazio bat detektatu da. Beharbada "
-"eskuz konponketa batzuk egin beharko dituzu instalazioaren ondoren."
+msgid "Default"
+msgstr "Lehenetsia"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Suebaki-konfigurazioa detektatu da!"
+msgid "Button 2 Emulation"
+msgstr "2. botoiaren emulazioa"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Account Password"
-msgstr "Kontuaren pasahitza"
+msgid "type1inst building"
+msgstr "type1inst eraikitzen"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Kontuaren identifikatzailea (erabiltzaile-izena)"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Konexioaren denbora-muga (segundotan)"
+msgid "choose image file"
+msgstr "aukeratu irudi fitxategia"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Konexioaren abiadura"
+msgid "X server"
+msgstr "X zerbitzaria"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Markatzeko modua"
+msgid "Domain Admin User Name"
+msgstr "Domeinuaren Admin Erabiltzaile Izena"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose your country"
-msgstr "Aukeratu zure herrialdea edo estatua"
+msgid "There was an error while scanning for TV channels"
+msgstr "Errore bat izan da TB kateak bilatzerakoan"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Hornitzailearen dns 2 (aukerakoa)"
+msgid "US keyboard (international)"
+msgstr "AEBetako teklatua (nazioartekoa)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Hornitzailearen dns 1 (aukerakoa)"
+msgid "Not installed"
+msgstr "Instalatu gabe"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Hornitzailearen telefono-zenbakia"
+msgid "LAN connection"
+msgstr "Sare lokaleko konexioa (LAN)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Hornitzailearen izena (adib. hornitzailea.net)"
+msgid "/File/-"
+msgstr "/Fitxategia/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Zure telefono-zenbakia"
+msgid "Italian"
+msgstr "Italiarra"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Card IO_1"
-msgstr "Txartelaren S/I_1"
+msgid "Basic"
+msgstr "Oinarrizkoa"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+" eguneraketak 2002 MandrakeSoft Stew Benedict-ek <sbenedict\\@mandrakesoft."
+"com>"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Txartelaren S/I_0"
+msgid "Honduras"
+msgstr "Honduras"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr ""
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "Txartelaren S/I"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Txartelaren mem (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr "Markatuta dagoenean, jabea eta taldea ez dira aldatuko"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Txartelaren IRQ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Bootstrap partizio berezi hau\n"
+"sistemaren abio bikoitza\n"
+"egiteko da.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Bete edo egiaztatu ondoko eremua"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Aukeratu urrats bakoitzean instalazioa errepikatuko den, ala eskuz egingo "
+"duzun"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Konexioaren konfigurazioa"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"Badirudi sistema ez dagoela Internetera konektatuta.\n"
-"Saiatu konexioa birkonfiguratzen."
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Segurtasun-arrazoiengatik, deskonektatu egingo da orain."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr "\tFTP bidezko sarea.\n"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sistema Internetera konektatuta dago orain."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Errusiarra (Yawerty)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Konexioa probatzen..."
+msgid "You must enter a device or file name!"
+msgstr "Gailua edo fitxategi-izena adierazi behar duzu!"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Internetera orain konektatu nahi duzu?"
+msgid "/_Quit"
+msgstr "/_Irten"
-#: ../../network/tools.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Interneteko konfigurazioa"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
-#: ../../partition_table/raw.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphics memory: %s kB\n"
+msgstr "Memoria grafikoa: %s kB\n"
+
+#: ../../standalone.pm:1
#, fuzzy, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-"Okerren bat gertatzen ari da zure unitatean. \n"
-"Datuen osotasuna egiaztatzeko probak huts egin du. \n"
-"Horrek esan nahi du, diskoan ezer idazten bada, zaborra sortuko dela ausaz"
+" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
+" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
+" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
+" baldintzak betez gero.\n"
+"\n"
+" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
+" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
+" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
+" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
+"\n"
+" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
+" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (lehenetsia)"
+msgid "access to compilation tools"
+msgstr "Konpilaketa tresnen atzipena"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "\"%s\" CUPS zerbitzarian"
+msgid "Please select data to restore..."
+msgstr "Hautatu leheneratzeko datuak..."
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Urruneko inprimagailuak"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Aboot erabiltzeko asmoa baduzu, utzi lekua (2048 sektore nahikoa da)\n"
+"diskoaren hasieran"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Standard test page"
+msgstr "Proba-orri estandarra"
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(makina honetan)"
+msgid "Create"
+msgstr "Sortu"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(on %s)"
-msgstr "(%s)"
+msgid "What"
+msgstr "Zer"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "There was an error ordering packages:"
+msgstr "Errore bat izan da paketeak ordenatzean:"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgariarra (BDS)"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Belaunaldi berrikoa"
+msgid "Disable Server"
+msgstr "Ezgaitu Zerbitzaria"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Filesystem encryption key"
+msgstr "Fitxategi-sistema enkriptatzeko gakoa"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Gujarati"
+msgstr "Gujaratera"
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Aukeratu editatu nahi duzun 10 barrutiko lehen zenbakia,\n"
+"edo sakatu Sartu, jarraitzeko.\n"
+"Zure aukera? "
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Inprimatu, ez egon ilaran)"
+msgid "Save theme"
+msgstr "gaia gorde"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Modelo ezezaguna"
+msgid "group"
+msgstr "taldea"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Modelo ezezaguna"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Ataka"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Ostalari-izena"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Sarea"
+msgid "Brazil"
+msgstr "Brasil"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "%s interfazea"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Auto Install"
+msgstr "Instalazio automatikoa"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Bertako Sare helbidea"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "Sarea konfiguratzeko morroia"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Inprimagailu gordina (kontrolatzailerik ez)"
+msgid "Removable media automounting"
+msgstr "Euskarri aldagarrien automuntatzea"
-#: ../../printer/main.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", %s komandoaren bidez"
+msgid "Printing"
+msgstr "Inprimatzea"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "\"%s\" Novell zerbitzarian, \"%s\" inprimagailua"
+msgid "Unkown driver"
+msgstr "Gidari ezezaguna"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "\"%s\" SMB/Windows zerbitzarian, elkarbanatu \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Ez dira inprimagailurik aurkitu zure makinara zuzenean lotuta"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", \"%s\" TCP/IP ostalaria, %s ataka"
+msgid "Create a new partition"
+msgstr "Sortu partizio berria"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "\"%s\" LPD zerbitzarian, \"%s\" inprimagailua"
+msgid "Driver:"
+msgstr "Gidaria:"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "Modelo ezezaguna"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", %s atakan"
+msgid "Use fdisk"
+msgstr "Erabili fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", funtzio anitzeko gailua"
+msgid "MOVE YOUR WHEEL!"
+msgstr "MUGITU GURPILA!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", funtzio anitzeko gailua - HP JetDirect"
+msgid "sent: "
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", funtzio anitzeko gailua - USB"
+msgid "Automatic IP"
+msgstr "IP automatikoa"
-#: ../../printer/main.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", funtzio anitzeko gailua \\/*%s ataka paraleloan"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Hortxe duzu. Instalazioa osatu da eta GNU/Linux sistema prest duzu\n"
+"erabiltzeko. Sakatu \"Ados\" sistema berrabiarazteko. GNU/Linux edo\n"
+"GNU/Linux abiaraz dezakezu, nahiago duzuna (abio bikoitza izanez gero),\n"
+"ordenagailua berrabiarazi bezain laster.\n"
+"\n"
+"\"Aurreratua\" botoiak (Aditu moduan soilik) beste bi botoi erakusten ditu:\n"
+"\n"
+" * \"sortu auto-instalazioko disketea\": instalazio oso bat, oraintxe\n"
+"konfiguratu duzuna bezalakoa, operadore baten laguntzarik gabe automatikoki\n"
+"egingo duen instalazio-diskete bat sortzeko.\n"
+"\n"
+" Kontuan izan beste bi aukera daudela erabilgarri botoian klik egitean:\n"
+"\n"
+" * \"Errepikatu\". Hau partzialki automatizatutako instalazioa da,\n"
+"partizio-urratsa (eta hau soilik) interaktiboa izango baita.\n"
+"\n"
+" * \"Automatizatua\". Erabat automatizatutako instalazioa: disko gogorra\n"
+"erabat berridatziko da, eta datu guztiak galduko dira.\n"
+"\n"
+" Eginbide hau oso praktikoa da antzeko ordenagailu asko instalatzen\n"
+"direnerako. Ikus Auto-instalazioa atala gure web gunean;\n"
+"\n"
+" * \"Gorde pakete-hautapena\"(*): lehen egindako pakete-hautapena gordetzen\n"
+"du. Gero, beste instalazio bat egitean, sartu disketea unitatean eta\n"
+"instalazioa exekutatzeko, joan laguntza-pantailara [F1] tekla sakatuz eta\n"
+"idatzi >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) FAT formatudun disketea behar duzu (GNU/Linux-en horrelako diskete bat\n"
+"sortzeko, idatzi \"mformat a:\")"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", USB printer"
-msgstr ", \\/*%s USB inprimagailua"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking sagua"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ", USB printer \\#%s"
-msgstr ", \\/*%s USB inprimagailua"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuration of a remote printer"
+msgstr "Urruneko inprimagailu baten konfigurazioa"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " on parallel port \\#%s"
-msgstr " - \\/*%s ataka paraleloan"
+#: ../../lang.pm:1
+#, c-format
+msgid "Moldova"
+msgstr "Moldavia"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printers"
-msgstr "Inprimagailu lokalak"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Mesedez markatu babes-kopia aurretik zinta ezabatu nahi baduzu."
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Kanalizatu lana komando batean"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Konpainien euskarri behar espezifikoei erantzuteko lerroko plataforma"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Adierazi inprimagailuaren URI bat"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URLaren hasieran 'ftp:' edo 'http:' egon behar da"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "NetWare zerbitzariko inprimagailua"
+msgid "Add a new rule at the end"
+msgstr "Gehitu arau berri bat amaieran"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT zerbitzariko inprimagailua"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Sareko inprimagailua (TCP/socket-a)"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Orain %s moduluari bere aukerak eman diezazkiokezu.\n"
+"Aukerak ``izena=balioa izena2=balioa2 ...'' formatuan daude.\n"
+"Adibidez, ``io=0x300 irq=7''"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Urruneko lpd zerbitzariko inprimagailua"
+msgid "Quit without writing the partition table?"
+msgstr "Irten partizio-taula idatzi gabe?"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Urruneko CUPS zerbitzariko inprimagailua"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Urruneko inprimagailua"
+msgid "Installing packages..."
+msgstr "Paketeak instalatzen..."
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Inprimagailu lokala"
+msgid "Dutch"
+msgstr "Holandarra"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "The following packages need to be installed:\n"
+msgstr "Ondorengo pakete hauek instalatuko dira"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Aplikazioak konfiguratzen..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "service setting"
+msgstr "zerbitzuaren ezarpena"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "\"%s\" inprimagailua ezabatzen..."
+msgid "Custom"
+msgstr "Pertsonalizatua"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Fitxategi hau beste atzera-begizta batek erabiltzen du, aukeratu beste bat"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "\"%s\" inprimagailua kendu nahi duzu?"
+msgid "Read-only"
+msgstr "Irakurketa-soilik"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "Kendu inprimagailua"
+msgid "Latvia"
+msgstr "Letonia"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Ikasi inprimagailua erabiltzen"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Ez dago gidari ezagunik"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Inprimatu proba-orriak"
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org/GIMP-tik "
-"kentzean."
+"Inprimagailu hau detektatu da automatikoki, zuk konfiguratu nahi duzuna ez "
+"bada, idatzi gailuaren izena/fitxategi-izena"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"\"%s\" inprimagailua behar bezala kendu da Star Office/OpenOffice.org/GIMP-"
-"tik."
+"Zure makinan ez da Soinu Txartelik aurkitu. Ziurtatu Linux-ek onartzen duen "
+"Soinu Txartela ondo konektatuta dagoela.\n"
+"\n"
+"\n"
+"Gure hardware datubasea bisitatu dezakezu hemen:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Inprimagailua Star Office/OpenOffice.org/GIMP-tik kentzen"
+msgid "Configure Local Area Network..."
+msgstr "Konfiguratu sare lokala..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Kendu inprimagailu hau Star Office/OpenOffice.org/GIMP-tik"
+msgid "Launch the sound system on your machine"
+msgstr "Abiarazi zure makinako soinu-sistema"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org/GIMP-n "
-"gehitzean."
+msgid "Preparing printer database..."
+msgstr "Inprimagailuaren datu-basea prestatzen..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"\"%s\" inprimagailua behar bezala gehitu da Star Office/OpenOffice.org/GIMP-"
-"n."
+msgid "Information"
+msgstr "Informazioa"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Star Office/OpenOffice.org/GIMP-n inprimagailua gehitzen"
+msgid "No network card"
+msgstr "Ez dago sare-txartelik"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Gehitu inprimagailu hau Star Office/OpenOffice.org/GIMP-n"
+msgid "Which filesystem do you want?"
+msgstr "Zein fitxategi-sistema nahi duzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" inprimagailua lehenetsi gisa ezarri da orain."
+msgid "3 buttons"
+msgstr "3 botoi"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Inprimagailu lehenetsia"
+msgid "Detailed information"
+msgstr "Informazio xehea"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Ezarri inprimagailu hau lehenetsi gisa"
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Inprimagailuaren aukerak"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"Inprimagailuaren ezarpen lehenetsiak\n"
+"\n"
+"Ziurtatu orri-tamaina eta tinta-mota/inprimatzeko modua (erabilgarri badago)"
+"eta laser inprimagailuaren hardware-konfigurazioa zuzen ezarri direla. "
+"Kontuan hartu inprimatzeko kalitatea oso handia bada askoz mantsoago "
+"inprimatuko duela segurutik."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa"
+msgid "This floppy is not FAT formatted"
+msgstr "Diskete honek ez du FAT formaturik"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa, kontrolatzailea"
+msgid "Configuring network"
+msgstr "Sarea konfiguratzen"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "\"%s\" inprimagailu zaharra ezabatzen..."
+msgid "Graphic Card"
+msgstr "Txartela grafikoa"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Inprimagailuaren izena, azalpena, kokalekua"
+msgid "Resizing Windows partition"
+msgstr "Windows fitxategi-sistemaren mugak kalkulatzen"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Printer connection type"
-msgstr "Inprimagailuaren konexio-mota"
+msgid "Provider dns 1 (optional)"
+msgstr "Hornitzailearen dns 1 (aukerakoa)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Inprimagailu \"gordina\""
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Egin!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"Orain egin dezakezu %s partizioa.\n"
+"Egin ondoren, ez ahaztu `w' erabiliz gordetzea"
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -10641,504 +10744,364 @@ msgstr "Egin!"
msgid "Close"
msgstr "Itxi"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"%s inprimagailua\n"
-"Zer da inprimagailu honetan aldatu nahi duzuna?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Aldatu inprimagailuaren konfigurazioa"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Add a new printer"
-msgstr "Gehitu inprimagailu berria"
+msgid "Calendar"
+msgstr "Egutegia"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Normal Mode"
-msgstr "Modu normala"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
+"Leheneratu Hautatutako\n"
+"Katalogo Sarrera"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Aldatu inprimatzeko sistema"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"Urruneko lpd inprimagailua erabiltzeko, inprimagailu-zerbitzariaren "
+"ostalari-\n"
+"izena eta zerbitzari horretako inprimagailu-izena eman behar dituzu."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPSen konfigurazioa"
+msgid "Iceland"
+msgstr "Islandia"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
+msgid "consolehelper missing"
+msgstr "consolehelper falta da"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
+#: ../../services.pm:1
+#, c-format
+msgid "stopped"
+msgstr "geldituta"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+msgid "Whether the FPU has an irq vector"
msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Ezarpenak aldatzeko, inprimagailu "
-"bat lehenesteko edo informazioa ikusteko, egin klik bikoitza inprimagailu "
-"batean."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Inprimatze-sistema: "
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Instalatutako softwarea egiaztatzen..."
+msgid "Expand Tree"
+msgstr "Zabaldu zuhaitza"
-#: ../../printer/printerdrake.pm:1
+# unloading : deskargatu ???? zama????
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Foomatic instalatzen ..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "\"%s\" inprimagailua ezartzen..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
+"\"%s\" gidari zaharra zerrenda beltzean dago.\n"
+"\n"
+"Kerneletik deskargatzerakoan arazoak sortzen dituela txostendu da.\n"
+"\n"
+"\"%s\" gidari berria hurrengo bootstrap-ean erabiliko da soilik."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "\"%s\" inprimagailua ezartzen..."
+msgid "Expert Mode"
+msgstr "Aditu modua"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Inprimagailu-datuak irakurtzen..."
+msgid "Printer options"
+msgstr "Inprimagailuaren aukerak"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Zein inprimatze-sistema (spooler) erabili nahi duzu?"
+msgid "Local Network adress"
+msgstr "Bertako Sare helbidea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Hautatu inprimagailuaren spooler-a"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Inprimagailu lehenetsia"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Paketeak instalatzen..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Sistema-fitxategien babeskopia egin. (/etc direktorioa )"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "%s kentzen"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
msgstr ""
-"(%s) inprimatze-sistema ez da automatikoki hasiko makina abiarazten denean.\n"
+"Orain, eguneratutako paketeak jaisteko aukera daukazu. Pakete hauek "
+"banaketa\n"
+"kaleratu ondoren kaleratu dira. Segurtasun edo akats konponketak izan "
+"ditzakete.\n"
"\n"
-"Baliteke abiarazte automatikoa desaktibatuta egotea segurtasun-maila "
-"handiagora aldatu delako, eta inprimatze-sistema eraso-gune potentziala "
-"delako.\n"
+"Pakete hauek jaisteko Internetera lotura beharko duzu\n"
"\n"
-"Inprimatze-sistema automatikoki hastea berriro aktibatu nahi duzu?"
+"Eguneratzeak instalatu nahi dituzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Abioan inprimatze-sistema abiarazi"
+msgid "Samba Server"
+msgstr "Samba Zerbitzaria"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
msgstr ""
-"%s inprimatze-sistema segurtasun-maila %sn dabilen sisteman instalatzera "
-"zoaz.\n"
-"\n"
-"Inprimatze-sistema honek inprimatze-lanei itxaroteko eta lanak maneiatzeko "
-"daemon (atzeko planoko prozesu) bat exekutatzen du. Daemon hori urruneko "
-"makinek ere atzitu dezakete sarearen bitartez eta hala, erasoak jasateko "
-"gunea izan daiteke. Beraz, daemon hautatu bakan batzuk besterik ez dira "
-"abiarazten lehenespenez segurtasun-maila honetan.\n"
-"\n"
-"Makina honetan konfiguratu nahi duzu inprimaketa?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Inprimatze-sisteman segurtasun-maila %s instalatzen"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "paranoidea"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "handia"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Inprimatze-sistema berrabiarazten ..."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Urruneko inprimagailu baten konfigurazioa"
+msgid "Australian Optus cable TV"
+msgstr "Australiako Optus kable TB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Sarerako sarbidea ez dago martxan eta ezin da abiarazi. Begiratu "
-"konfigurazioa eta hardwarea ondo dauden. Gero saiatu berriro urruneko "
-"inprimagailua konfiguratzen."
+" <Tab>/<Alt-Tab> elem. aldatzeko | <Zuriunea> hautatzeko | <F12> hurr. pant. "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-"Instalazioan egindako sare-konfigurazioa ezin da abiarazi orain. "
-"Berrabiarazi sistema eta begiratu ea sarean sartzen zaren eta, ondoren, "
-"zuzendu konfigurazioa Mandrake Kontrol Zentroko \"Sarea eta Internet\"/"
-"\"Konexioa\" atalean, eta gero konfiguratu inprimagailua, Mandrake Kontrol "
-"Zentroan bertan, \"Hardwarea\"/\"Inprimagailua\" atalean."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configure the network now"
-msgstr "Konfiguratu sarea orain"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Jarraitu sarea konfiguratu gabe"
+msgid "Zimbabwe"
+msgstr "Zimbawe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Urruneko inprimagailu bat konfiguratzera zoaz. Sarerako sarbidea behar duzu "
-"horretarako, baina sarea konfiguratu gabe dago. Aurrera jarraitzen baduzu "
-"sarea konfiguratu gabe, ezin izango duzu orain konfiguratzen ari zaren "
-"inprimagailua erabili. Zer egin nahi duzu?"
+msgid "Please enter the host name or IP."
+msgstr "Idatzi ostalariaren izena edo IPa."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "Sare-funtzionalitatea ez dago konfiguratuta"
+msgid "When"
+msgstr "Noiz"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Starting network..."
-msgstr "Sarea abiarazten ..."
+msgid "Second DNS Server (optional)"
+msgstr "Bigarren DNS zerbitzaria (aukerakoa)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Inprimagailuaren datuak freskatzen..."
+msgid "Finland"
+msgstr "Finlandia"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Zure lehengo inprimagailu lehenetsia (\"%s\") transferitu duzu, Inprimagailu "
-"lehenetsia izan behar du %s inprimatze-sistema berrian ere?"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Transferitu inprimagailu-konfigurazioa"
+msgid "Color depth: %s\n"
+msgstr "Kolorearen sakonera: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "%s transferitzen..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Ezin duzu pakete hau desautatu. Bertsio-berritu egin behar da"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Inprimagailu-izen berria"
+msgid "Loading from floppy"
+msgstr "Disketetik kargatzen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"\"%s\" inprimagailua badago lehendik ere,\n"
-"bere konfigurazioa gainidatzi nahi duzu?"
+"Drakperm fitxategien ezaugarriak aldatzeko erabiltzen da, baimenak, jabeak, "
+"eta taldeak, hori msec bitartez egiten du.\n"
+"Jatorrizko arauak gainidatziko dituzte zure arau propioak editatu ditzakezu."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Transferitu"
+msgid "Slovenia"
+msgstr "Eslovenia"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
-"\"%s\" izeneko inprimagailu bat badago %s(e)n. \n"
-"Sakatu \"Transferitu\" gainidazteko.\n"
-"Beste izen bat idatz dezakezu, edo inprimagailu hori saltatu."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Ez transferitu inprimagailuak"
+"Sartu erabiltzaile bat\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"\n"
-"Markatu transferitu nahi dituzun inprimagailuak eta sakatu\n"
-"\"Transferitu\"."
+"- PCI eta USB gailuak: honek saltzaile, gailu, azpi-saltzaile eta azpi-gailu "
+"PCI/USB id-ak zerrendatzen ditu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Halaber, fabrikatzaileek emandako PPD fitxategiekin edo jatorrizko CUPS "
-"kontrolatzaileekin konfiguratutako inprimagailuak ezin dira transferitu."
+msgid "ProgressBar color selection"
+msgstr "AurrearpenBarraren kolore aukeraketa"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"Gainera, programa honen edo \"foomatic-configure\"ren bidez sortu ez diren "
-"ilarak ezin dira transferitu."
+"Hauek dira sarrerak.\n"
+"Beste batzuk gehi ditzakezu edo lehendik daudenak aldatu."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPDk eta LPRng-ek ez dute IPP inprimagailurik onartzen.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQk inprimagailu lokalak, urruneko LPD inprimagailuak eta Socket/TCP "
-"inprimagailuak soilik onartzen ditu.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"CUPSek ez ditu onartzen Novell zerbitzarietako inprimagailuak edo datuak "
-"libre osatutako komando batean bidaltzen dituztenak.\n"
+"at komandoaren bidez programatutako komandoak exekutatzen ditu at \n"
+"exekutatzean zehaztutako orduan, eta batch komandoak exekutatzen ditu \n"
+"batezbesteko karga nahikoa baxua denean."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"%s spooler-erako egin duzun inprimagailu-konfigurazioa %s spooler-era (uneko "
-"spooler-era) kopia dezakezu. Konfigurazio-datu guztiak (inprimagailuaren "
-"izena, azalpena, kokalekua, \n"
-"konexio-mota eta aukera-ezarpenak lehenetsiak) hartuko ditu, baina lanak ez "
-"dira transferituko.\n"
-"Ilara guztiak ezin dira transferitu, ondorengo arrazoiak direla eta:\n"
+msgid "Radio support:"
+msgstr "Irrati euskarria :"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Zure inprimagailua automatikoki konfiguratu zen zure PC-tik argazki txartel "
-"unitateetara sarrera emateko. Orain \"MtoolsFM\" programa grafikoa erabiliz "
-"(Menua: \"Aplikazioak\" -> \"Fitxategi tresnak\" -> \"MTools Fitxategi "
-"Kudeatzailea\") edo \"mtools\" komando lerroko utilitatea erabiliz (sartu "
-"\"man mtools\" komando lerroan informazio gehiago jasotzeko) zure argazki "
-"txartelak atzitu ditzakezu. Txartelaren fitxategi-sistema \"p:\" unitate "
-"hizkipean aurkituko duzu, edo ondorengo hizkietan argazki txartela duten HP "
-"inprimagailu bat baino gehiago baduzu. \"MtoolsFM\" tresnan unitate hizki "
-"artean mugitu zaitezke fitxategi-zerrenden goi-eskuin ertzetan dagoen eremua "
-"erabiliz."
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "Paketeak instalatzen..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Zure funtzio-anitzeko gailua automatikoki konfiguratu zen eskaneatu ahal "
-"izateko. Orain \"scanimage\"rekin eskanea dezakezu (\"scanimage -d hp:%s\" "
-"eskanerra zehazteko, bat baino gehiago badituzu) komando-lerrotik edo "
-"\"xscanimage\" edo \"xsane\" interfaze grafikoekin. GIMP erabiltzen baduzu, "
-"\"File\"/\"Acquire\" menuko puntu egokiaren bidez ere eskanea dezakezu. "
-"Informazio gehiago nahi baduzu, deitu \"man scanimage\" komando-lerroan.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
+msgid "boot disk creation"
+msgstr "abioko disketea sortu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Proba-orria(k) inprimatzen..."
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Inprimatzeko aukeren zerrenda"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" inprimagailuan inprimatzen"
+msgid "Change type"
+msgstr "Aldatu mota"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Inprimaketa/Argazki Txartelen Sarrera \"%s\"-n"
+msgid "SILO Installation"
+msgstr "SILO instalazioa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\": inprimatzen/eskaneatzen"
+msgid "Use CD/DVDROM to backup"
+msgstr "Erabili CD/DVDROMa babeskopia egiteko"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Inprimatzeko/Eskaneatzeko/Argazki Txartelak \"%s\"-n"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-msgstr ""
-"Uneko inprimagailuak dituen aukerak ezagutzeko, irakurri ondoko zerrenda edo "
-"egin klik \"Inprimatu aukeren zerrenda\" botoian.%s%s\n"
"\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Zorionak, instalazioa burutu da.\n"
+"Atera abioko diskoa eta sakatu itzulera-tekla berrabiarazteko.\n"
"\n"
-"\"%s\" eta \"%s\" komandoen bidez inprimatze-lan baten aukera-ezarpenak alda "
-"daitezke. Aski da nahi diren ezarpenak komando-lerroan gehitzea, adib.: \"%s "
-"<fitxategia>\".\n"
+"\n"
+"Mandrake Linux-en bertsio honetarako erabilgarri dauden konponbideen "
+"informaziorako,\n"
+"kontsultatu Erratak helbide honetan:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Zure sistema konfiguratzeko informazioa Mandrake-ren Erabiltzailearen \n"
+"Gida Ofizialeko instalatu ondorengo azalpenei buruzko kapituluan duzu."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"\"xpdq\" interfaze grafikoa ere erabil dezakezu aukerak ezartzeko eta "
-"inprimatze-lanak maneiatzeko.\n"
-"KDE erabiltzen baduzu mahaigaineko ingurune gisa, \"estualdi-botoi\" bat "
-"egongo da, \"GELDITU inprimagailua!\" dioena, eta inprimatze-lan guztiak "
-"berehala etengo ditu bertan klik egitean. Papera trabatzen denean eta "
-"horrelakoetan erabili ohi da.\n"
+msgid "paranoid"
+msgstr "paranoidea"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "Babeskopia egindakoan, bidali berri-emateko mezua hona :"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11151,301 +11114,249 @@ msgstr ""
"komandoa\" eremuan ere erabil dezakezu. Baina hor ez eman fitxategi-izena, "
"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa edo \"%s <fitxategia>\".\n"
+msgid "Resolution"
+msgstr "Bereizmena"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"Uneko inprimagailuaren aukera erabilgarrien zerrenda eskuratzeko, egin klik "
-"\"Inprimatzeko aukeren zerrenda\" botoian."
+"SMB inprimagailuan inprimatzeko, SMB ostalari-izena eman behar duzu (Oharra! "
+"Baliteke TCP/IP ostalari-izena desberdina izatea!) eta beharbada inprimaketa-"
+"zerbitzariaren IP helbidea eta baita atzitu nahi duzun inprimagailuaren "
+"konpartitze-izena eta erabiltzaile-izenak, pasahitzak eta lantalde-"
+"informazioa ere."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-"\n"
-"\"%s\" komandoaren bidez ere alda daitezke inprimatze-lan jakin baten aukera-"
-"ezarpenak. Gehitu nahi dituzun ezarpenak komando-lerroari, adib. \"%s "
-"<fitxategia>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa.\n"
+msgid "reconfigure"
+msgstr "birkonfiguratu"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Hemen duzu inprimagailu honen inprimatzeko aukeren zerrenda:\n"
-"\n"
+"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
+"ekin,\n"
+"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "Xinetd Zerbitzua"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "sareko tresnen atzipena"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-"Komando horiek aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan erabil ditzakezu ere, baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, \"%s "
-"<fitxategia>\" komandoa edo inprimatze-tresna grafiko bat erabil dezakezu: "
-"\"xpp <fitxategia>\" edo \"kprinter <fitxategia>\". Tresna grafikoak "
-"inprimagailua hautatzeko eta aukeren ezarpenak erraz aldatzeko erabiltzen "
-"dira.\n"
+"Mandrake Linux 9.1k audio fitxategiak jotzeko, zure argazkiak editatu eta "
+"manipulatzeko, eta bideoak ikusteko software berriena erabiltzeko aukera "
+"ematen dizu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Ongi egin du?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
+"Errorea aboot instalatzean, \n"
+"instalazioa ezartzen saiatu lehen partizioa suntsitzen badu ere?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-"Inprimatze-egoera:\n"
-"%s\n"
+"aukeren azalpena:\n"
+"\n"
+" Urrats honetan Drakbackup-ek hauek aldatzen utziko dizu:\n"
+"\n"
+" - Konprimitze-modua:\n"
+" \n"
+" bzip2 konpresioa hautatuz, gzip-ekin baino gehiago\n"
+" konprimituko dituzu datuak (% 2-10 inguru).\n"
+" Aukera hau ez da lehenespen gisa hautatzen konpresio-modu\n"
+" honek denbora gehiago (% 1000 gehiago) hartzen duelako.\n"
+" \n"
+" - Eguneratze modua:\n"
+"\n"
+" Aukera honek babeskopia eguneratuko du, baina ez da\n"
+" oso erabilgarria, eguneratu aurretik babeskopia\n"
+" deskonprimitu egin behar baita.\n"
+" \n"
+" - .backupignore modua:\n"
+"\n"
+" cvs-rekin bezala, Drakbackup-ek ezikusi egingo die direktorio\n"
+" bakoitzeko .backupignore fitxategietako erreferentzia guztiei.\n"
+" adib: \n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "Ez inprimatu proba-orririk"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Argazkien proba-orria"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Proba-orri alternatiboa (A4)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Proba-orri alternatiboa (Letter)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Leheneratu Hautatutako\n"
+"Fitxategiak"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standard test page"
-msgstr "Proba-orri estandarra"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s badago, ezabatu?\n"
+"\n"
+"Adi: Dagoeneko prozesu hau burutu baduzu seguraski\n"
+"authorized_keys sarrera purgatu beharko duzu zerbitzarian."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Print"
-msgstr "Inprimatu"
+msgid "Please fill or check the field below"
+msgstr "Bete edo egiaztatu ondoko eremua"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Proba-orririk ez"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "/etc/fstab aldaketak gorde nahi dituzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Hautatu inprimatu nahi dituzun proba-orriak.\n"
-"Kontuan hartu: argazkien proba-orriak denbora asko behar izan dezake "
-"inprimatzeko, eta memoria gutxiko laser inprimagailuetan baliteke ez "
-"ateratzea ere. Gehienetan nahikoa izaten da proba-orri estandarra "
-"inprimatzea."
+msgid "Boot Protocol"
+msgstr "Abioko protokoloa"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Proba-orriak"
+msgid "LVM-disks %s\n"
+msgstr "%s LVM-diskoak\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Inprimagailu hau (\"%s\")\n"
-"lehenetsi nahi duzu?"
+msgid "The package %s is needed. Install it?"
+msgstr "%s paketea behar da. Instalatu nahi duzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "%s aukera barrutitik kanpo dago!"
+msgid "On boot"
+msgstr "Abioan"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s aukerak zenbakia izan behar du!"
+msgid "Bus identification"
+msgstr "Bus identifikazioa"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s aukerak osoko zenbakia izan behar du!"
+msgid "Please make a backup of your data first"
+msgstr "Egin zure datuen babeskopia lehendabizi"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Inprimagailu-modeloaren hautapena"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Inprimagailuaren ezarpen lehenetsiak\n"
-"\n"
-"Ziurtatu orri-tamaina eta tinta-mota/inprimatzeko modua (erabilgarri badago)"
-"eta laser inprimagailuaren hardware-konfigurazioa zuzen ezarri direla. "
-"Kontuan hartu inprimatzeko kalitatea oso handia bada askoz mantsoago "
-"inprimatuko duela segurutik."
+msgid "Vatican"
+msgstr "Letoniarra"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Disko gogor bat baino gehiago duzu, zeinetan instalatuko duzu linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Lexmark inkjet eta konfigurazio honekin inprimatu ahal izateko, Lexmark-ek "
-"emandako inkjet inprimagailu-gidariak behar dituzu (http://www.lexmark."
-"com/). Klikatu \"Drivers\" estekan. Gero aukeratu eredua eta ondoren \"Linux"
-"\" sistema eragile gisa. Gidariak RPM pakete gisa edo instalazio grafiko "
-"interaktiboa duten shell script gisa egoten dira. Ez da beharrezkoa "
-"konfigurazio hau bitarteko grafikoen bidez egitea. Ezeztatu zuzenean "
-"lizentzia-kontratuaren ondoren. Gero inprimatu inprimatze-burua lerrokatzeko "
-"orriak \"lexmarkmaintain\"ekin eta doitu burua lerrokatzeko ezarpenak "
-"programa honekin."
+msgid "Boot ISO"
+msgstr "Abiapen ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet inprimagailuaren konfigurazioa"
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark-en Inkjet inprimagailu-kontrolatzaileek inprimagailu lokalak soilik "
-"onartzen dituzte, ez urruneko makinetako inprimagailuak edo inprimaketa-"
-"zerbitzariak. Konektatu zure inprimagailua ataka lokal batera edo konfigura "
-"ezazu konektatuta dagoen makinan."
+msgid "Remove List"
+msgstr "Kendu zerrenda"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
msgstr ""
-"OKI laser winprinter inprimagailua konfiguratzen ari zara. Inprimagailu "
-"horiek oso komunikazio-protokolo berezia erabiltzen dute eta beraz "
-"paraleloko lehen atakara konektatuta soilik funtzionatzen dute. "
-"Inprimagailua beste ataka batera edo inprimaketa-zerbitzari batera "
-"konektatuta badago, konektatu inprimagailua paraleloko lehen atakarekin "
-"probako orria inprimatu aurretik. Bestela, inprimagailuak ez du "
-"funtzionatuko. Zure konexio-motaren ezarpena ez du kontuan hartuko "
-"kontrolatzaileak."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-en konfigurazioa"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Zure inprimagailua ez badago zerrendan, aukeratu bateragarria (ikus "
-"inprimagailuaren eskuliburua) edo antzekoa den bat "
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Begiratu Printerdrake-k ondo detektatu duen automatikoki zure inprimagailu-"
-"modeloa. Bilatu modelo egokia zerrendan kurtsorea okerreko modeloan edo "
-"\"Inprimagailu gordinean\" badago."
+msgid "Morocco"
+msgstr "Maroko"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -11454,559 +11365,477 @@ msgstr "Zein inprimagailu-modelo daukazu?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "Inprimagailu-modeloaren hautapena"
+msgid "Add a new printer"
+msgstr "Gehitu inprimagailu berria"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Inprimagailuaren datu-basea irakurtzen..."
+msgid " All of your selected data have been "
+msgstr " Hautatu dituzun datu guztiak izan dira "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Select model manually"
-msgstr "Hautatu modeloa eskuz"
+msgid "<-- Delete"
+msgstr "<-- Ezabatu"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Modeloa zuzena da"
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "cpu # "
msgstr ""
-"Printerdrake-k inprimagailua auto-detektatzean lortutako modelo-izena "
-"inprimagailuen datu-basean dituen modeloekin konparatu du, egokiena "
-"aurkitzeko. Aukera okerrekoa izan daiteke, batez ere zure inprimagailua ez "
-"bada azaltzen datu-baseko zerrendan. Beraz, begiratu aukera egokia den eta, "
-"hala bada, egin klik \"Modeloa zuzena da\"n, bestela, egin klik \"Hautatu "
-"modeloa eskuz\"en hurrengo pantailara joan eta modeloa eskuz hautatzeko.\n"
-"\n"
-"Hau aurkitu du Printerdrake-k zure inprimagailuarentzat:\n"
-"\n"
-"%s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer model"
-msgstr "Zure inprimagailu-modeloa"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Inprimagailuaren datu-basea prestatzen..."
+msgid "chunk size"
+msgstr "zatiaren tamaina"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Location"
-msgstr "Kokalekua"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "komandoak editatzeko, edo 'c' komando-lerroa nahi baduzu."
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Description"
-msgstr "Azalpena"
+msgid "Problems installing package %s"
+msgstr "Arazoa %s paketea instalatzean"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer"
-msgstr "Inprimagailuaren izena"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Karga balio hau baino handiagoa bada, abisua jasoko duzu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Inprimagailu bakoitzak izen bat behar du (adibidez \"inprimagailua\"). "
-"Azalpenaren eta Kokalekuaren eremuak ez dira nahitaez bete behar. "
-"Erabiltzaileentzako iruzkinak dira."
+"\n"
+"\n"
+"Akats txosten bat bidaltzeko, klikatu txosten botoia.\n"
+"Honek web nabigatzailearen leiho batean https://drakbug.mandrakesoft.com\n"
+" zabalduko du, bertan bete beharreko inprimakia aurkituko duzu. Gainean \n"
+"erakusten den informazioa zerbitzari hartara bidaliko da\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add a scanner manually"
+msgstr "Hautatu erabiltzailea eskuz"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Reload partition table"
+msgstr "Birkargatu partizio-taula"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Bai, automatikoki honekin hasi nahi dut (erabiltzailea, mahaigaina)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ", funtzio anitzeko gailua"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Paketeak instalatzen..."
+msgid "Search for fonts in installed list"
+msgstr "Bilatu letra-tipoak instalatutakoen zerrendan"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Paketeak instalatzen..."
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Sare lokalak ez du `.0' amaieran; irteten. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Paketeak instalatzen..."
+msgid "Boot"
+msgstr "Root"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "Baliozko URI bat sartu behar da!"
+msgid "Tuner type:"
+msgstr "Sintonizatzaile mota :"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domeinu-izena:"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
+"Hemen zure ordenagailuaren inprimatzeko sistema hautatuko dugu. Beste SE\n"
+"batzuek bakarra eskainiko dute beharbada, baina Mandrake Linux-ek hiru\n"
+"eskaintzen ditu.\n"
+"\n"
+" * \"pdq\" - ``print, don't queue'' esan nahi du, hau da, ``inprimatu, ez\n"
+"egon ilaran''. Aukera egokia da inprimagailua zuzenean konektatuta baduzu,\n"
+"papera trabatzen denean ohartu nahi baduzu eta sareko inprimagailurik ez\n"
+"baduzu. Sareko oso kasu sinpleak maneiatuko ditu eta mantso samarra da\n"
+"sarerako. Aukeratu \"pdq\" GNU/Linux-eko zure lehen bidaia bada.\n"
+"Instalazioa egin ondoren aukerak aldatu nahi badituzu, exekutatu\n"
+"Mandrake-ren kontrol-zentroko PrinterDrake eta egin klik adituaren botoian.\n"
+"\n"
+" * \"%s\" - ``Common Unix Printing System'' oso ona da zure inprimagailu\n"
+"lokalean inprimatzeko eta baita munduaren beste aldean ere. Sinplea da eta\n"
+"\"lpd\" inprimatze-sistema zaharretako bezero nahiz zerbitzari gisa jardun\n"
+"dezake. Lehengo sistemekin bateragarria da, beraz. Gauza asko egin ditzake,\n"
+"baina oinarrizko konfigurazioa \"pdq\" bezain erraza da. \"lpd\" zerbitzari\n"
+"bat emulatzeko behar baduzu, \"cups-lpd\" daemon-a aktibatu behar duzu.\n"
+"Inprimagailuaren aukerak hautatzeko edo inprimatzeko interfaze grafikoak\n"
+"ditu.\n"
+"\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. Sistema honek\n"
+"besteek egin ditzaketen gauza bertsuak egin ditzake, baina Novell sarean\n"
+"muntatutako inprimagailuetan inprimatuko du, IPX protokoloa onartzen\n"
+"duelako, eta shell komandoetan zuzenean inprima dezakeelako. Novell behar\n"
+"baduzu edo kanalizaziorik erabili gabe komandoetan inprimatu behar baduzu,\n"
+"erabili lprNG. Bestela, hobe da CUPS, sareetan lan egiteko sinpleagoa eta\n"
+"hobea delako."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Kanalizatu lana komando batean"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Detektatutako eredua: %s %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Baliozko URI bat sartu behar da!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Inprimagailuaren URIa"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" tekla"
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-"Inprimagailua atzitzeko URIa zuzenean zehatz dezakezu. URIak CUPS edo "
-"Foomatic zehaztapenak bete behar ditu. Kontuan izan spooler guztiek ez "
-"dituztela URI mota guztiak onartzen."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Ataka"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Inprimagailuaren ostalari-izena edo IP"
+"\n"
+"\n"
+"Begiratu Printerdrake-k ondo detektatu duen automatikoki zure inprimagailu-"
+"modeloa. Bilatu modelo egokia zerrendan kurtsorea okerreko modeloan edo "
+"\"Inprimagailu gordinean\" badago."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Ataka-zenbakiak osoko zenbakia izan behar du!"
+msgid "Security Administrator:"
+msgstr "Segurtasun Kudeatzailea:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Inprimagailuaren ostalari izena falta da edo IP falta da!"
+msgid "Please enter your login"
+msgstr "Sartu saioa hasteko izena"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-"TCP edo Socket inprimagailu batera inprimatzeko, inprimagailuaren ostalari-"
-"izena edo IP eta, nahi baduzu, portu zenbakia (jatorrian 9100 da) eman behar "
-"dituzu. HP HP JetDirect zerbitzarietan portu-zenbakia normalki 9100 izaten "
-"da, beste zerbitzari batzuetan aldatu egin daiteke. Begiratu zure "
-"hardwarearen eskuliburuan."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Aukeratu auto-detektatutako inprimagailuetako bat zerrendatik edo sartu "
-"ostalari-izena edo IP eta, nahi baduzu, portu zenbakia (jatorrian 9100 da) "
-"eremuetan."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket inprimagailuaren aukerak"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "\"%s\" ostalaria, %s portua"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", \"%s\" ostalaria, %s protua"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning network..."
-msgstr "Sarean bilatzen..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Inprimagailuen auto-detekzioa"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP ilara-izena falta da!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP zerbitzari-izena falta da!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Inprimaketa-ilararen izena"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Inprimagailu-zerbitzaria"
+"Ez duzu Interneteko konexiorik.\n"
+"Sortu bat lehendabizi, 'Konfiguratu'n klik eginda"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare inprimagailuan inprimatzeko, NetWare inprimaketa-zerbitzariaren "
-"izena eman behar duzu (Oharra! baliteke bere TCP/IP ostalari-izena "
-"desberdina izatea!) eta baita atzitu nahi duzun inprimagailuaren inprimaketa-"
-"ilararen izena eta erabiltzaile-izenak eta pasahitzak ere."
+msgid "Fonts copy"
+msgstr "Letra-tipoen kopia"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare inprimagailuaren aukerak"
+msgid "Automated"
+msgstr "Automatizatua"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Lotu zure inprimagailua Linux zerbitzari batera eta utzi zure Windows makina"
-"(k) berari lotzen bezero gisa.\n"
-"\n"
-"Ziur zaude inprimagailu hau ezartzen jarraitu nahi duzula egiten ari zaren "
-"moduan?"
+msgid "Do you want to test the configuration?"
+msgstr "Konfigurazioa probatu nahi duzu?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"Ezarri zure Windows zerbitzaria, inprimagailua IPP protokoloarekin "
-"eskuragarri egon dadin eta ezarri inprimaketa, makina honetatik, \"%s\" "
-"lotura mota erabilizPrinterdrake-n.\n"
-"\n"
+"\"%s\" inprimagailua behar bezala kendu da Star Office/OpenOffice.org/GIMP-"
+"tik."
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Windows-eko pasahitza duen kontu bati inprimaketa ezartzera zoaz. Samba "
-"bezeroaren softwareak daukan egitura akats batek eraginda, pasahitza ageriko "
-"testu bezala jartzen da, Windows zerbitzarira inprimaketa lana bidaltzen "
-"duen Samba bezeroaren komando lerroan. Beraz makina hau erabiltzen duen "
-"edozein erabiltzailek pasahitza pantailan erakutsi dezake \"ps auxwww\" "
-"bezalako komandoak erabiliz.\n"
+"Estandarra: Hau da internetera bezero bezala konektatuko den konputagailu "
+"batentzako\n"
+" segurtasun estandarra.\n"
"\n"
-"Aukera hauetako bat erabiltzea gomendatzen dugu (edozein modutara ziurtatu "
-"behar duzu zure bertoko sareko makinek soilik dutela zure Windows "
-"zerbitzarira sarrera, adibidez suhesi baten bitartez):\n"
+"Altua: Muga batzuk ezartzen ditu, eta egiaztapen automatiko gehiago "
+"exekutatzen dira gauero.\n"
"\n"
-"Erabili pasahitzik-gabeko kontua zure Windows zerbitzarian, \"GUEST\" kontua "
-"esaterako, edo inprimatzeko sortutako kontu berezia. Ez ezabatu pasahitz "
-"babesa kontu pertsonal bati edo administradore kontuari.\n"
+"Altuagoa: Sistemak segurtasun maila nahikoa dauka bezero askoren lotura "
+"onartuko duen zerbitzari\n"
+" bezala erabil dadin. Zure makina Interneten bezero soila "
+"badamaila apalagoa hautatu behar zenuke.\n"
"\n"
-"Ezarri zure Windows zerbitzaria, inprimagailua LPD protokoloarekin "
-"eskuragarri egon dadin. Ezarri gero inprimagailua makina honetan \"%s\" "
-"koneksio motarekin Printdraken.\n"
+"Paranoikoa: Hau aurreko mailaren antzekoa da, baino sistema erabat itxita "
+"dago eta segurtasun\n"
+" ezaugarriak mailarik altuenean daude.\n"
"\n"
+"Segurtasun Kudeatzailea:\n"
+" 'Segurtasun Alertak' aukera ezartzen bada, segurtasun "
+"alertak bidaliko zaizkio erabiltzaile honi (erabiltzaile-izena edo\n"
+"\t posta-e)."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SEGURTASUN OHARRA!"
+msgid "Save packages selection"
+msgstr "Gorde pakete-hautapena"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba konpartitze-izena falta da!"
+msgid "Remove the last item"
+msgstr "Kendu azken elementua"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Zerbitzari-izena edo zerbitzariaren IP eman behar da!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
+"Leheneratzeko erabiltzaile-zerrenda (erabiltzaile bakoitzaren datu berrienak "
+"bakarrik dira garrantzitsuak)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Auto-detektatuta"
+msgid "No net boot images created!"
+msgstr "Ez dira sare abiapen irudiak sortu!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Lantaldea"
+msgid "use pptp"
+msgstr "erabili pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Konpartitze-izena"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Aukeratu zein zerbitzari abiarazi behar den automatikoki abioan"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB zerbitzariaren IP"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Ikasi inprimagailua erabiltzen"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB zerbitzariaren ostalaria"
+msgid "Configure the network now"
+msgstr "Konfiguratu sarea orain"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Nahi zenuen inprimagailua auto-detektatu bada, hautatu ezazu zerrendatik "
-"eta gehitu erabiltzaile-izena, pasahitza, eta/edo lantaldea beharrezko bada."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Aukeratu ispilu bat paketeak bertatik hartzeko"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"SMB inprimagailuan inprimatzeko, SMB ostalari-izena eman behar duzu (Oharra! "
-"Baliteke TCP/IP ostalari-izena desberdina izatea!) eta beharbada inprimaketa-"
-"zerbitzariaren IP helbidea eta baita atzitu nahi duzun inprimagailuaren "
-"konpartitze-izena eta erabiltzaile-izenak, pasahitzak eta lantalde-"
-"informazioa ere."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) inprimagailuaren aukerak"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "\"%s\" inprimagailua \"%s\" zerbitzarian"
+"FAT tamaina-aldatzaileak ezin du zure partizioa maneiatu, \n"
+"errore hau gertatu da: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", \"%s\" inprimagailua \"%s\" zerbitzarian"
+msgid "Which sector do you want to move it to?"
+msgstr "Zein sektoretara eraman nahi duzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Urruneko inprimagailu-izena falta da!"
+msgid "Do you want to click on this button?"
+msgstr "Botoi honetan klik egin nahi duzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Urruneko ostalari izena falta da!"
+msgid "Bahamas"
+msgstr "Bahamak"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Urruneko inprimagailu-izena"
+msgid "Manual configuration"
+msgstr "Eskuzko konfigurazioa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Urruneko ostalari-izena"
+msgid "search"
+msgstr "bilatu"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Urruneko lpd inprimagailua erabiltzeko, inprimagailu-zerbitzariaren "
-"ostalari-\n"
-"izena eta zerbitzari horretako inprimagailu-izena eman behar dituzu."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Urruneko lpd inprimagailuaren aukerak"
+"Pakete honek hautatutako teklatu-mapa kargatzen du\n"
+"/etc/sysconfig/keyboard fitxategian ezarritakoaren arabera. kbdconfig "
+"utilitatearen bidez hauta daiteke teklatu-mapa.\n"
+"Zerbitzu hau gaituta uztea komeni da makina gehienetan."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Eskuzko konfigurazioa"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Inprimagailua/gailua aukeratu/adierazi behar duzu!"
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-" (Ataka paraleloak: /dev/lp0, /dev/lp1..., baliokideak dira LPT1:, LPT2:..., "
-"lehen USB inprimagailua: /dev/usb/lp0, 2. USB inprimagailua: /dev/usb/"
-"lp1, ...)."
+"Syslog, daemon askok erabiltzen duten zerbitzua da, mezuak sistemako\n"
+"hainbat egunkari-fitxategitan sartzeko. Komeni izaten da syslog beti "
+"exekutatzea."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown/Others"
+msgstr "Ezezaguna|Generikoa"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
+msgid "No TV Card detected!"
+msgstr "Ez da TB txartelik aurkitu!"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
-"fitxategi-izena"
+msgid "Options"
+msgstr "Aukerak"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
+#, c-format
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "\"%s\" inprimagailua lehenetsi gisa ezarri da orain."
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna. . Inprimagailuaren konfigurazioa zeharo "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, hautatu \"Eskuzko konfigurazioa\"."
+"OKI laser winprinter inprimagailua konfiguratzen ari zara. Inprimagailu "
+"horiek oso komunikazio-protokolo berezia erabiltzen dute eta beraz "
+"paraleloko lehen atakara konektatuta soilik funtzionatzen dute. "
+"Inprimagailua beste ataka batera edo inprimaketa-zerbitzari batera "
+"konektatuta badago, konektatu inprimagailua paraleloko lehen atakarekin "
+"probako orria inprimatu aurretik. Bestela, inprimagailuak ez du "
+"funtzionatuko. Zure konexio-motaren ezarpena ez du kontuan hartuko "
+"kontrolatzaileak."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "Auto-detected"
+msgstr "Auto-detektatuta"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki. Inprimagailuaren konfigurazioa "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, aldatu \"Eskuzko konfigurazioa"
-"\"aukerara."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Ondorengo inprimagailuak\n"
+"Zure konputagailua Interneteko konexioa banatu dezan konfiguratzera zoaz.\n"
+"Eginbide horrekin, zure bertoko sareko konputagailuek zure konputagailuaren "
+"Internet konexioa erabili ahal izango dute.\n"
+"\n"
+"Zure Sare/Internet sarbidea drakconnect erabiliz konfiguratu duzula\n"
+"ziurtatu aurrera egin aurretik.\n"
"\n"
+"Adi: Sare-moldagailu dedikatu bat behar duzu Bertako Eremuko Sare (LAN) bat "
+"konfiguratzeko."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
-"fitxategi-izena"
+"Ez dago lekurik 1 MBko bootstrap-a sortzeko! Instalazioak jarraituko du, "
+"baina zure sistema abiarazteko, bootstrap partizioa sortu beharko duzu "
+"DiskDrake-rekin"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
@@ -12017,1860 +11846,1492 @@ msgstr ""
"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
"fitxategi-izena"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
-"fitxategi-izena"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Ezetsi"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Inprimagailu hau detektatu da automatikoki, zuk konfiguratu nahi duzuna ez "
-"bada, idatzi gailuaren izena/fitxategi-izena"
+"HardDrake-k hardware-proba bat exekutatzen du eta nahi izanez \n"
+"gero hardware berria/aldatua konfiguratzen du."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Inprimagailu erabilgarriak"
+msgid "Remote Printers"
+msgstr "Urruneko inprimagailuak"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Ez da inprimagairik aurkitu!"
+msgid "Creating and formatting file %s"
+msgstr "%s fitxategia sortzen eta formateatzen"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Gailua edo fitxategi-izena adierazi behar duzu!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"Ez da inprimagailu lokalik aurkitu! Inprimagailua eskuz instalatzeko, idatzi/"
-"gailu/fitxategi izena (Ataka paraleloak: /dev/lp0, /dev/lp1, ..., "
-"baliokideak dira LPT1:, LPT2:..., lehen USB inprimagailua: /dev/usb/lp0, "
-"bigarren USB inprimagailua: /dev/usb/lp1, ...)."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Inprimagailu lokala"
+msgid "Choose an existing LVM to add to"
+msgstr "Aukeratu lehendik dagoen LVM bat gehitzeko"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "\\/*%s USB inprimagailua"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "xfs restart"
+msgstr "xfs berrabiarazi"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "\\/*%s ataka paraleloko inprimagailua"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"\"%s\" inprimagailua badago lehendik ere,\n"
+"bere konfigurazioa gainidatzi nahi duzu?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "\"%s\" inprimagailua \"%s\" SMB/Windows zerbitzarian"
+msgid "No partition available"
+msgstr "ez dago partizio erabilgarririk"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "\"%s\" sareko inprimagailua, %s portua"
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Detected %s"
-msgstr "%s detektatua"
+msgid "Unselected All"
+msgstr "Desautatutako guztiak"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", \"%s\" inprimagailua \"%s\" SMB/Windows zerbitzarian"
+msgid "Domain Name Resolver"
+msgstr "Domeinuko Izen Ebazlea"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", \"%s\" sareko inprimagailua, %s portua"
+msgid "Encryption key (again)"
+msgstr "Enkriptatze-gakoa (berriro)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Zorionak, inprimagailua instalatuta eta konfiguratuta duzu!\n"
-"\n"
-"Inprimatzeko, aplikazioko \"Inprimatu\" komandoa erabil dezakezu (normalean "
-"\"Fitxategia\" menuan izan ohi da).\n"
-"\n"
-"Inprimagailu bat gehitu, kendu, edo izenez aldatu nahi baduzu, edo ezarpen "
-"lehenetsiak (paper-iturria, inprimatze-kalitatea...) aldatu nahi badituzu, "
-"hautatu \"Inprimagailua\" Mandrake Kontrol Zentroko \"Hardwarea\" atalean."
+msgid "Samba share name missing!"
+msgstr "Samba konpartitze-izena falta da!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Auto-detektatu Microsoft Windows darabilten makinetara lotutako "
-"inprimagailuak"
+msgid "True Type install done"
+msgstr "True Type instalazioa eginda"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Auto-detektatu bertako sarera zuzenean lotutako inprimagailuak"
+msgid "Detection in progress"
+msgstr "Detekzio martxan"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Auto-detektatu makina honetara lotutako inprimagailuak"
+msgid "Build Whole Kernel -->"
+msgstr "Eraiki Kernel Osoa -->"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Ongi etorri Inprimagailu Ezarpen Morroira\n"
-"\n"
-"Morroi honek zure konputagailu honetara lotutako inprimagailua(k) "
-"instalatzen lagunduko dizu.\n"
-"\n"
-"Makina honetara lotutako inprimagailuak badituzu, mesedez entxufatu eta "
-"piztu itzazu auto-detektatuak izan daitezen.\n"
-"\n"
-" Klikatu \"Hurrengoa\" prest zaudenean, eta \"Etsi\" zure inprimagailua "
-"orain ezarri nahi ez duzunean."
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Ongi etorri %s(e)ra"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Sartu moduluak eguneratzeko disketea %s unitatean"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
"\n"
-"Ongi etorri Inprimagailu Ezarpen Morroira\n"
-"\n"
-"Morroi honek zure konputagailu honetara lotutako inprimagailua(k) edo sarera "
-"zuzenean lotutakoa(k) instalatzen lagunduko dizu.\n"
-"\n"
-"Makina honetara lotutako inprimagailuak badituzu, mesedez entxufatu eta "
-"piztu itzazu auto-detektatuak izan daitezen. Berdina sareko inprimagailuekin "
-"ere.\n"
-"\n"
-"Ohartu sarera lotutako inprimagailuen auto-detekzioak denbora gehiago behar "
-"duela makina honetara lotuta dauden inprimagailuak bakarrik auto-"
-"detektatzeko baino. Beraz ezabatu sareko inprimagailuen auto-detekzioa behar "
-"ez duzunean.\n"
-"\n"
-" Klikatu \"Hurrengoa\" prest zaudenean, eta \"Etsi\" zure inprimagailua "
-"orain ezarri nahi ez duzunean."
+"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Ongi etorri Inprimagailu Ezarpen Morroira\n"
-"\n"
-"Morroi honek zure konputagailu honetara lotutako inprimagailua(k), sarera "
-"zuzenean lotutakoa(k) edo Windows makina batera loturikoa(k) instalatzen "
-"lagunduko dizu.\n"
-"\n"
-"Makina honetara lotutako inprimagailuak badituzu, mesedez entxufatu eta "
-"piztu itzazu auto-detektatuak izan daitezen. Berdina sareko inprimagailu eta "
-"Windows makinetara lotutako inprimagailuekin ere.\n"
-"\n"
-"Ohartu sarera lotutako inprimagailuen auto-detekzioak denbora gehiago behar "
-"duela makina honetara lotuta dauden inprimagailuak bakarrik auto-"
-"detektatzeko baino. Beraz ezabatu sareko eta/edo windows-ostalari "
-"inprimagailuen auto-detekzioa behar ez dituzunean.\n"
-"\n"
-" Klikatu \"Hurrengoa\" prest zaudenean, eta \"Etsi\" zure inprimagailua "
-"orain ezarri nahi ez duzunean."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Fitxategi-konpartitzea"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Ongi etorri inprimagailua instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuan erabil daitezkeen inprimagailu urruneko "
-"edo lokalak instalatzeko laguntza jasoko duzu, baita saretik instalatzeko "
-"ere.\n"
-"\n"
-"Inprimagailua instalatzeko behar duen informazioa eskatuko dizu eta "
-"inprimagailu-kontrolatzaile, kontrolatzaile-aukera eta konexio-mota "
-"erabilgarri guztiak jarriko ditu zure esku."
+"\"%s\" komandoaren bidez ere alda daitezke inprimatze-lan jakin baten aukera-"
+"ezarpenak. Gehitu nahi dituzun ezarpenak komando-lerroari, adib. \"%s "
+"<fitxategia>\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"Kasu batzuetan, %s kontrolatzaileak informazio gehigarria behar du egoki \n"
+"funtzionatzeko, nahiz eta normalki hori gabe ongi funtzionatzen duen. Aukera "
+"gehigarriak zehaztu \n"
+"nahi dituzu, edo kontrolatzaileari zure makina probatzen\n"
+"utzi, behar duen informazioa bilatzeko? Batzuetan, probatzeak ordenagailua "
+"blokeatuko du, baina\n"
+"horrek ez luke kalterik egin beharko."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
-msgstr ""
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Ez da CD etiketa zuzena. Diskoak %s etiketa dauka."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Ongi etorri Interneteko konexioa konpartitzeko utilitatera!\n"
+"\n"
+"%s\n"
+"\n"
+"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "\"%s\" inprimagailua ezartzen..."
+msgid "Cuba"
+msgstr "Kuba"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Inprimagailu erabilgarriak"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"OHARRA: Inprimagailu eredua eta inprimaketa sistemaren arabera %d MB-etik "
-"gora software gehigarri instalatuko da."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Ziur zaude makina honetan inprimaketa ezarri nahi duzula?\n"
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Inprimaketa gaitu nahi duzu goian aipatutako inprimagailuetan?\n"
+msgid " (multi-session)"
+msgstr " (saio-anitza)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Inprimaketa gaitu nahi duzu bertako sarean dauden inprimagailuetan?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Nukleoaren abioaren denbora-muga"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Inprimaketa gaitu nahi duzu goian aipatutako inprimagailuetan edo bertako "
-"sarean dauden inprimagailuetan?\n"
+"Zure txartelak 3D hardware-azelerazioaren euskarria eduki dezake, baina "
+"XFree %s(r)ekin soilik.\n"
+"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
+"2Dan."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Ziurtatu zure inprimagailu guztiak lotuta eta piztuta daudela).\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX Partizio-morroiak irtenbide hauek aurkitu ditu:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Ez dira inprimagailurik aurkitu zure makinara zuzenean lotuta"
+msgid "Hungarian"
+msgstr "Hungariarra"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"\n"
-"%d inprimagailu ezezagun daude zure sistemara zuzenean lotuta"
+"Hautatu hornitzailea.\n"
+" Zerrendan ez badago, aukeratu Zerrendatu gabe"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Ordu-sinkronizazio automatikoa (NTP erabiliz)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"\n"
-"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"\n"
-"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "LDAP Zerbitzaria"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"\n"
-"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
+"PCMCIA euskarria eramangarrietan ethernet eta modemak\n"
+"eta horrelakoak onartzeko izaten da normalki. Ez da abiaraziko "
+"konfiguratuta izan ezean, beraz\n"
+"lasai eduki daiteke instalatuta premiarik izan ez arren."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr ""
-"\n"
-"eta %d inprimagailu ezezagun daude "
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "Aukeratu zure herrialdea edo estatua"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
"\n"
-"eta inprimagailu ezezagun bat dago "
+"- Sistema-fitxategiak:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Checking your system..."
-msgstr "Zure sistema egiaztatzen..."
+msgid "Standalone Tools"
+msgstr "Tresna Autonomoak"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Berrabiarazi XFS"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr "Non"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "but not matching"
+msgstr "bat ez badatoz"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"Hemen gidari alternatibo bat hautatu dezakezu (OSS edo ALSA) zure soinu "
+"txartelarentzat (%s)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Modeloa zuzena da"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "NCP zerbitzari-izena falta da!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA txartelak konfiguratzen..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu falta da"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Urruneko CUPS zerbitzariko inprimagailua"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr "Enkriptatze-gakoa"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Kendu hautatutakoak"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s detektatua"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Christmas uhartea"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Gehitu erabiltzailea"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Abioko kargatzailea instalatzeak huts egin du. Errore hau gertatu da:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI kanalea"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Ezarri inprimagailu hau lehenetsi gisa"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "%s partizioan"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoidea"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
+msgid "<-- Del User"
+msgstr "<-- Ezabatu Erabiltzailea"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Inprimagailu erabilgarriak"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Location on the bus"
+msgstr "Busean kokapena"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Kendu hautatutakoak"
+#, c-format
+msgid "No printer found!"
+msgstr "Ez da inprimagairik aurkitu!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "gailuaren saltzaile izena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Ezabatu disko osoa"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (lehenetsia)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "CUPS konfigurazio automatikoa"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Aldatu inprimatzeko sistema"
+msgid "Automatic reconfiguration"
+msgstr "Birkonfigurazio automatikoa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Eginda"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "\"%s\" CUPS zerbitzarian"
+#: ../../lang.pm:1
+#, c-format
+msgid "Turks and Caicos Islands"
+msgstr "Turk eta Caico uharteak"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(makina honetan)"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "baimenak"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "abisu-konfigurazioa"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Aurrekoa"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Fitxategi-konpartitzea"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Interneteko konexioa konpartitzeko konfigurazioa"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Txandakatu alfabetikoaren eta taldeka ordenatuaren artean"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Gaiak"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Aukerak: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Orain %s erabiltzen ari zara Abioko Kudeatzaile gisa.\n"
+"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
+#, c-format
+msgid "OKI winprinter configuration"
msgstr "OKI winprinter-en konfigurazioa"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
-"Inprimagailu auto-detekzioa (Bertakoa, TCP/Socket, eta SMB inprimagailuak)"
+msgid "Saint Helena"
+msgstr "Santa Helena"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Segurtasun-maila:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Urrats batzuk ez dira osatu.\n"
"\n"
-"Urruneko CUPS zerbitzariko inprimagailuak ez dituzu hemen konfiguratu behar; "
-"horrelako inprimagailuak automatikoki detektatuko dira."
+"Ziur zaude orain irten nahi duzula?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Nola dago konektatuta inprimagailua?"
+msgid "Sudan"
+msgstr "Sudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Hautatu inprimagailu-konexioa"
+msgid "Polish (qwertz layout)"
+msgstr "Poloniarra (qwertz diseinua)"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinam"
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Ongi etorri %s sistema eragilearen aukeratzailera!\n"
+"\n"
+"Aukeratu sistema eragile bat goiko zerrendan edo\n"
+"itxaron %d segundo lehenetsitako abiorako.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugesa"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Atzera-begiztako fitxategi-izena: "
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS zerbitzariaren helbidea 1.2.3.4 formatuan egon behar luke"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "seriekoa"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Newzealand"
+msgstr "Zeelanda Berria"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Direktorio honek erroko fitxategi-sisteman egon behar du"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "CapsLock key"
+msgstr "BlokMaius tekla"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Abioko kargatzailea"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Hautatu txartel grafikoaren memoria-tamaina"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM izena?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Zenbait gailu \"%s\" hardware motan ezabatu egin dira:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "%s %s interfaze aurkitu dira"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "sticky-bit"
+msgstr "bit-likatsua"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "Post Install"
+msgstr "Posta-instalazioa"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "The internal domain name"
+msgstr "Barneko domeinu izena"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Txartelaren IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Aukeratu abioko diskoa egiteko erabili nahi duzun diskete-unitatea"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO testu-menuarekin"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Guztia (suhesirik gabe)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Nukleo-imajina bat zehaztu behar duzu"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", funtzio anitzeko gailua - USB"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Bera"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Ispiluarekin kontaktatzen pakete erabilgarrien zerrenda lortzeko"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituaniako AZERTY (zaharra)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasildarra (ABNT-2)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
+"aurrerapen-barraren goi eta\n"
+"ezker ertzaren y koordenatua"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO instalazioa"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent eta Grenadinak"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fitxategia/_Ireki"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Auto-instalazioko disketea sortzen"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Open Firmware-ren atzerapena"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Hungary"
+msgstr "Hungaria"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Total progess"
+msgstr "Aurrerapen guztia"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "abisu-konfigurazioa"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "New Zealand"
+msgstr "Zeelanda Berria"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
+"Murriztapen batzuk daude, eta egiaztapen automatiko gehiago gauero egiten "
+"dira."
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "please choose the date to restore"
+msgstr "aukeratu leheneratzeko data"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "ext2tik ext3ra aldatzen"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Antilla herbeheretarrak"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Browse to new restore repository."
+msgstr "Nabigatu leheneratze repositorio berrira."
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse icmp echo."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Ongi etorri inprimagailua instalatzeko morroira\n"
+"\n"
+"Morroi honen bidez, ordenagailuan erabil daitezkeen inprimagailu urruneko "
+"edo lokalak instalatzeko laguntza jasoko duzu, baita saretik instalatzeko "
+"ere.\n"
+"\n"
+"Inprimagailua instalatzeko behar duen informazioa eskatuko dizu eta "
+"inprimagailu-kontrolatzaile, kontrolatzaile-aukera eta konexio-mota "
+"erabilgarri guztiak jarriko ditu zure esku."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
msgstr ""
+"\n"
+"eta %d inprimagailu ezezagun daude "
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Segurtasun Kudeatzailea (sarrera edo posta-e)"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Ez da ISDN PCI txartelik aurkitu. Hautatu bat hurrengo pantailan."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Buffer-gainezkatzeen eta formatu-kateen erasoen aurka defendatzen duen "
-"liburutegi bat."
+msgid "GB"
+msgstr "GB"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "Erabili libsafe zerbitzarietarako"
+msgid "Please give a user name"
+msgstr "Eman erabiltzaile-izen bat"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Security level"
-msgstr "Segurtasun-maila"
+msgid "Enable CD Boot?"
+msgstr "Gaitu CDtik abiaraztea?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Mesedez aukeratu nahi duzun segurtasun-maila"
+msgid " enter `void' for void entry"
+msgstr " sartu 'void' sarrera hutsa jartzeko"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec Oinarrizko Aukerak"
+msgid "on Hard Drive"
+msgstr "disko gogorrean"
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Aurreko mailan oinarritua, baina sistema erabat itxita dago.\n"
-"Segurtasun-eginbideak maximoan jarrita daude."
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Modem-konexio normala"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Segurtasun-maila honekin, sistema hau erabil liteke zerbitzari gisa.\n"
-"Segurtasun hau nahikoa da sistema bezero askoren konexioak onartzen dituen \n"
-"zerbitzari gisa erabili ahal izateko. Oharra: zure makina Interneteko bezero "
-"soila bada, hobe duzu maila apalagoa."
+"\n"
+"Zorionak, inprimagailua instalatuta eta konfiguratuta duzu!\n"
+"\n"
+"Inprimatzeko, aplikazioko \"Inprimatu\" komandoa erabil dezakezu (normalean "
+"\"Fitxategia\" menuan izan ohi da).\n"
+"\n"
+"Inprimagailu bat gehitu, kendu, edo izenez aldatu nahi baduzu, edo ezarpen "
+"lehenetsiak (paper-iturria, inprimatze-kalitatea...) aldatu nahi badituzu, "
+"hautatu \"Inprimagailua\" Mandrake Kontrol Zentroko \"Hardwarea\" atalean."
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"Murriztapen batzuk daude, eta egiaztapen automatiko gehiago gauero egiten "
-"dira."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hau da Internetera bezero gisa konektatzeko erabiliko diren "
-"ordenagailuentzat gomendatzen den segurtasun estandarra. "
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Orain xawtv erabili dezakezu (X Window barruan) !\n"
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasahitzak gaituta daude orain, baina sareko ordenagailu gisa erabiltzea ez "
-"da komeni oraindik."
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Ez dago nahikoa swap instalazioa burutzeko, gehitu egin beharko duzu"
-#: ../../security/level.pm:1
-#, c-format
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Ataka"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
-"Maila hau kontuz erabili behar da. Sistema erabilerrazagoa izango da, baina\n"
-"oso erraz erasotzekoa: ez da erabili behar beste ordenagailu batzuekin edo \n"
-"Internetekin konektatuta dauden makinetan. Ez dago pasahitzik."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoidea"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "Handiagoa"
+"GNU/Linux-ek GMT (Greenwich Mean Time) ordua erabiltzen du eta tokian\n"
+"tokiko ordura aldatzen du, hautatutako ordu-zonaren arabera. Desaktibatu\n"
+"nahi baduzu, desautatu \"Hardwarearen ordua GMTn ezarria\", hardwarearen\n"
+"ordua eta sistemaren ordua berdinak izan daitezen. Erosoa da makinan beste\n"
+"sistema eragile bat dagoenerako, esate baterako, Windows.\n"
+"\n"
+"\"Ordu-sinkronizazio automatikoa\" aukerak automatikoki doituko du erlojua\n"
+"Interneteko urruneko ordu-zerbitzari batekin konektatuz. Aukera ezazu\n"
+"zuregandik hurbil dagoen zerbitzari bat. Eginbide hau erabili ahal izateko\n"
+"Interneteko konexioa beharko duzu, noski. Zure makinan ordu-zerbitzari bat\n"
+"instalatuko du eta zure sare lokaleko beste makina batzuetatik ere erabili\n"
+"ahal izango duzu, nahi izanez gero."
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "High"
-msgstr "Handia"
+msgid "Which is your timezone?"
+msgstr "Zein da zure ordu-zona?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Poor"
-msgstr "Txikia"
+msgid "Guinea"
+msgstr "Ginea"
-#: ../../security/level.pm:1
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Ongi etorri Crackers-era"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "Sistema Internetera konektatuta dago orain."
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Hasi berriro saioa %s(e)n aldaketak aktibatzeko"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Hegoaldeko Georgia eta Hegoaldeko Sandwich uharteak"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Amaitu saioa eta, ondoren, sakatu Ktrl-Alt-Atzera"
+msgid "Japan (broadcast)"
+msgstr "Japonia (bcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
+msgid "Mozambique"
+msgstr "Mozanbike"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "\"/etc/dhcpd.conf\" sortu behar da lehenbizi!"
+msgid "Icon"
+msgstr "Ikonoa"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Zerbaitek hutsegin du! - mkisofs instalatuta dago?"
+msgid "Please choose what you want to backup"
+msgstr "Aukeratu zeren kopia egin nahi duzun"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO irudia %s da"
+msgid "256 colors (8 bits)"
+msgstr "256 kolore (8 bit)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Ez dago diskete-unitate erabilgarririk!"
+msgid "Read-write"
+msgstr "Irakurri/idatzi"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Disketea kendu dezakezu orain"
+msgid "Size: %s\n"
+msgstr "Tamaina: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Ezin izan da disketea atzitu!"
+msgid "Hostname: "
+msgstr "Ostalari-izena: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Mesedez sartu disketea:"
+msgid "Chunk size %s\n"
+msgstr "%s zatiaren tamaina\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Write Config"
-msgstr "Idatzi Ezarpena"
+msgid "Build the future of Linux!"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Local Printer"
+msgstr "Inprimagailu lokala"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Balio hauetako gehienak martxan duzun sistematik\n"
-"hartu dira. Behar bezala aldatu ditzakezu."
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd Zerbitzari Konfigurazioa"
+" Copyright (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "IP Range End:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "Samba Zerbitzaria"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domeinu-izena:"
+msgid "ADSL connection"
+msgstr "ADSL konexioa"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Ez dago konfiguraziorik, egin klik Morroian edo Aurreratuan.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Error!"
+msgstr "Errorea!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Sare-maskara"
+msgid "cable connection detected"
+msgstr "kable bidezko konexioa detektatu da"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "Permission denied transferring %s to %s"
+msgstr "%s %s-ra transferitzeko baimena ukatu da"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Akatsa Txostendu"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd Ezarpena..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "<-- Ezabatu Bezeroa"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Ezabatu Bezeroa"
+msgid "Resize"
+msgstr "Aldatu tamaina"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr "Gehitu Bezeroa -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "Gehitu/Ezabatu Bezeroak"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP bezeroa"
+msgid "Dominica"
+msgstr "Dominika"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Ez dira sare abiapen irudiak sortu!"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Mota: "
+msgid "Please enter the device name to use for backup"
+msgstr "Adierazi babeskopiarako erabiliko den gailuaren izena"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Ezabatu Erabiltzailea"
+msgid "Resolution: %s\n"
+msgstr "Bereizmena: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Add User -->"
-msgstr "Gehitu erabiltzailea -->"
+msgid "matching"
+msgstr "bat badatoz"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
+"Ezin dira zure kernelari dagozkion kernel moduluak atzitu (%s fitxategia "
+"falta da), honek orokorrean esan nahi du zure abiapen disketea ez dagoela "
+"instalazio euskarriarekin sinkronizatuta (mesedez sortu abiapen diskete "
+"berria)"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "NBI Guztiak Ezabatu"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Ezabatu"
-
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Honek minutu batzuk beharko ditu."
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Hautatu ataka egokia. Adibidez Windows-eko \"COM1\" atakak \"ttyS0\" du\n"
+"izena GNU/Linux-en."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Eraiki Kernel Guztiak -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Ez da nic batere hautatu!"
+msgid "The following packages are going to be removed"
+msgstr "Ondorengo pakete hauek kenduko dira"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Eraiki NIC Bakarri -->"
+msgid "Connect to the Internet"
+msgstr "Konektatu Internetekin"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Ez da kernelik hautatu!"
+msgid "Use existing partitions"
+msgstr "Lehendik dagoen partizioa erabili"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Eraiki Kernel Osoa -->"
+msgid "Canadian (Quebec)"
+msgstr "Kanadarra (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Abiapen ISO"
+msgid "Mouse device: %s\n"
+msgstr "Sagu-gailua: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Abiapen Disketea"
+msgid "Reselect correct fonts"
+msgstr "Hautatu berriro letra-tipo egokiak"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
+"Options Description:\n"
"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
+"aukeren azalpena:\n"
"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"Kontuz ftp backup erabiltzean, eginda dauden babeskopiak \n"
+"soilik bidaliko direlako zerbitzarira.\n"
+"Beraz, orain, disko gogorrean egin behar duzu babeskopia\n"
+"zerbitzarira bidali aurretik.\n"
"\n"
-msgstr ""
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
+"Options\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-" eguneraketak 2002 MandrakeSoft Stew Benedict-ek <sbenedict\\@mandrakesoft."
-"com>"
+"Azkenik, abioan interfaze grafikoa ikusi nahi duzun galdetuko zaizu.\n"
+"Kontuan izan galdera hori konfigurazioa ez probatzea aukeratu baduzu ere\n"
+"egingo zaizula. Jakina, \"Ez\" erantzun nahi izango duzu zure ordenagailuak\n"
+"zerbitzari gisa jokatu behar badu, edo bistaratzea konfiguratzea lortzen ez\n"
+"baduzu."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Gehitu/Ezabatu Bezeroak"
+msgid "We are now going to configure the %s connection."
+msgstr "%s konexioa konfiguratuko dugu orain."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Gehitu/Ezabatu erabiltzaileak"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Korporatiboa"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Sare Abiapen Irudiak"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Inprimagailuen auto-detekzioa"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "ezin izan da letra-tiporik aurkitu.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Disketea/ISO"
+msgid "Language"
+msgstr "Aukeratu hizkuntza"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Gelditu Zerbitzaria"
+msgid "Printer model selection"
+msgstr "Inprimagailu-modeloaren hautapena"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Abiatu Zerbitzaria"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"%s partizio-mota aldatu ondoren, partizio honetako datu guztiak galdu egingo "
+"dira"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Disable Server"
-msgstr "Ezgaitu Zerbitzaria"
+msgid "%d seconds"
+msgstr "%d segundo"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Enable Server"
-msgstr "Gaitu Zerbitzaria"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Sartu diskete huts bat %s unitatean"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Mandrake Terminal Zerbitzariaren Ezarpena"
+msgid "A valid URI must be entered!"
+msgstr "Baliozko URI bat sartu behar da!"
-#: ../../standalone/drakautoinst:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr "Kendu azken elementua"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "\"%s\" interfazea bilatu da, erabili nahi duzu?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Add an item"
-msgstr "Gehitu elementu bat"
+msgid "Re-configure interface and DHCP server"
+msgstr "Birkonfiguratu interfazea eta DHCP zerbitzaria"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Instalazio automatikoa"
+msgid "Sound configuration"
+msgstr "Soinu konfigurazioa"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketea behar bezala sortu da.\n"
-"Orain zure instalazioa errepika dezakezu."
+msgid "Photo test page"
+msgstr "Argazkien proba-orria"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Zorionak!"
+msgid "Custom disk partitioning"
+msgstr "Disko-partizio pertsonalizatua"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Enter Printer Name and Comments"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
"\n"
-"Ongi etorri.\n"
-"\n"
-"Auto-instalazioko parametroak ezkerreko sekzioetan daude erabilgarri"
+"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: %s"
+msgstr "Mota: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Auto-instalazioko disketea sortzen"
+msgid "Slovakian (QWERTY)"
+msgstr "Eslovakiarra (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "No Sound Card detected!"
+msgstr "Ez da Soinu Txartelik aurkitu!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Sagu-ataka"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-"Aukeratu urrats bakoitzean instalazioa errepikatuko den, ala eskuz egingo "
-"duzun"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Urrats automatikoen konfigurazioa"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Errepikatu"
+msgid "Ftp Server"
+msgstr "Ftp Zerbitzaria"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Auto-instalazioko diskete bat konfiguratzera zoaz. Eginbide hau arriskutsu "
-"samarra da eta kontuz ibili behar da.\n"
-"\n"
-"Eginbide honekin, ordenagailu honetan egin duzun instalazioa errepikatu ahal "
-"izango duzu, eta urrats batzuetan datuak eskatuko zaizkizu interaktiboki, "
-"balioak aldatu ahal izateko.\n"
-"\n"
-"Ahalik eta segurtasun handiena izateko, partizioa egitea eta formateatzea ez "
-"dira inoiz automatikoki egingo, berdin dio zer aukeratu duzun ordenagailu "
-"hau instalatu duzunean.\n"
-"\n"
-"Jarraitu nahi duzu ?"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Instalazio automatikoaren konfiguratzailea"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm letra-tipoen bihurketa"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ezin da aurkitu `%s' imajina-fitxategia, eta beharrezkoa da."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Errorea!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-"\n"
-"Leheneratze-arazoak:\n"
-"\n"
-"Leheneratze-urratsean, Drakbackup-ek babeskopia-fitxategi\n"
-"guztiak egiaztatuko ditu leheneratu aurretik.\n"
-"Leheneratu aurretik, Drakbackup-ek kendu egingo du\n"
-"jatorrizko direktorioa, eta datu guztiak galduko dituzu.\n"
-"Garrantzizkoa da kontuz ibiltzea eta babeskopia-fitxategiak\n"
-"eskuz ez aldatzea.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"aukeren azalpena:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Kontuz ftp backup erabiltzean, eginda dauden babeskopiak \n"
-"soilik bidaliko direlako zerbitzarira.\n"
-"Beraz, orain, disko gogorrean egin behar duzu babeskopia\n"
-"zerbitzarira bidali aurretik.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Azalpena:\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komoroak"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
"\n"
-" Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-" konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ... eta Bestelakoa (Windows partizioetan bezala)\n"
"\n"
-" Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
"\n"
-" Drakbackup erabiliz, zure sistema hautatutako\n"
-" direktorio batean lehenera dezakezu.\n"
+"We are now going to configure the %s connection.\n"
"\n"
-" Lehenespen gisa, babeskopia guztiak \n"
-" /var/lib/drakbackup direktorioan gordeko dira\n"
"\n"
-" Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
"\n"
"\n"
-"Leheneratze-urratsa:\n"
-" \n"
-" Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-" jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-" daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-" babeskopia egitea gomendatzen da.\n"
+"\n"
+"%s konexioa konfiguratuko dugu orain.\n"
"\n"
"\n"
+"Jarraitzeko, sakatu Ados."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" eguneraketak 2002 MandrakeSoft Stew Benedict-ek <sbenedict\\@mandrakesoft."
-"com>"
+msgid "Yaboot mode"
+msgstr "Yaboot modua"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "AEB (kablea)"
+
+#: ../../standalone/drakboot:1
+#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
+"Ezin da LiLo berriro jaurti!\n"
+"Jaurti \"lilo\" root bezala komando lerroan LiLo gai instalazioa osatzeko."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "3 botoiko sagu generikoa"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Hautatu beste euskarri bat leheneratzeko"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Software Kudeatzailea"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -13882,17 +13343,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"leheneratze azalpena:\n"
@@ -13921,4603 +13384,5218 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" - Sistema-fitxategien babeskopia:\n"
-" \n"
-"\tAukera honen bidez konfigurazio-fitxategi guztiak dituen\n"
-"\t/etc direktorioaren babeskopia egin daiteke. Kontuz ibili\n"
-"\tleheneratze-urratsean, eta ez gainidatzi hauek:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Erabiltzaile-fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, babeskopia egiteko erabiltzaileak\n"
-"\thauta ditzakezu.\n"
-"\tDisko-lekua gordetzeko, web arakatzailearen cachea ez \n"
-"\tsartzea komeni da.\n"
-"\n"
-" - Bestelako fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, gordetzeko datu gehiago gehituko dituzu.\n"
-"\tBeste babeskopiekin ezin da oraindik babeskopia inkrementala hautatu.\t\t\n"
-" \n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitza egin aurretik. \n"
-"\n"
-"\n"
+msgid "Re-submit"
+msgstr "Berriro bidali"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Posta bidaltzean izandako errore batzuk postfix gaizki \n"
-" konfiguratuta dagoelako izan dira. Konpontzeko, \n"
-" myhostname edo mydomain ezarri behar duzu hemen: /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CDa bere lekuan - jarraitu."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
+#, c-format
+msgid "KB"
+msgstr "KB"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" Urrats honetan Drakbackup-ek hauek aldatzen utziko dizu:\n"
-"\n"
-" - Konprimitze-modua:\n"
-" \n"
-" bzip2 konpresioa hautatuz, gzip-ekin baino gehiago\n"
-" konprimituko dituzu datuak (% 2-10 inguru).\n"
-" Aukera hau ez da lehenespen gisa hautatzen konpresio-modu\n"
-" honek denbora gehiago (% 1000 gehiago) hartzen duelako.\n"
-" \n"
-" - Eguneratze modua:\n"
-"\n"
-" Aukera honek babeskopia eguneratuko du, baina ez da\n"
-" oso erabilgarria, eguneratu aurretik babeskopia\n"
-" deskonprimitu egin behar baita.\n"
-" \n"
-" - .backupignore modua:\n"
-"\n"
-" cvs-rekin bezala, Drakbackup-ek ezikusi egingo die direktorio\n"
-" bakoitzeko .backupignore fitxategietako erreferentzia guztiei.\n"
-" adib: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "Network & Internet"
+msgstr "Sare-interfazea"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituaniako QWERTY \"fonetikoa\""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Restore"
-msgstr "Leheneratu"
+msgid "Net Boot Images"
+msgstr "Sare Abiapen Irudiak"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Inprimagailu erabilgarriak"
+
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Egin babeskopia orain"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Plug'n Play frogak hutsegin du. Mesedez hautatu monitore zehatz bat"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Konfigurazio aurreratua"
+msgid "Services and deamons"
+msgstr "Zerbitzuak eta daemon-ak"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Morroiaren konfigurazioa"
+msgid "Remote host name missing!"
+msgstr "Urruneko ostalari izena falta da!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Ikusi babeskopiaren konfigurazioa"
+msgid "with /usr"
+msgstr "/usr-rekin"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Egin babeskopia konfigurazio-fitxategitik"
+msgid "Network"
+msgstr "Sarea"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr " Drakbackup-en konfigurazioa"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Auto-detektatu Microsoft Windows darabilten makinetara lotutako "
+"inprimagailuak"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Guztizko progresioa"
+msgid "This password is too simple"
+msgstr "Pasahitz hau sinpleegia da"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sending files..."
-msgstr "Fitxategiak bidaltzen..."
+msgid "Slovakian (QWERTZ)"
+msgstr "Eslovakiarra (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "fitxategiak FTP bidez bidaltzen"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Instalazio minimo-minimoa (batez ere, urpmi gabe)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup other files"
-msgstr "Bestelako fitxategien babeskopia"
+msgid ""
+" Transfer \n"
+"Now"
+msgstr ""
+" Transferitu \n"
+"Orain"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup user files"
-msgstr "Erabiltzaile-fitxategien babeskopia"
+msgid "Use daemon"
+msgstr "Erabili daemon-a"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Backup system files"
-msgstr "Sistema-fitxategien babeskopia"
+msgid "Authentication"
+msgstr "Autentifikazioa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Garatzen... itxaron."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Gehitu inprimagailu hau Star Office/OpenOffice.org/GIMP-n"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "\"%s\" CUPS zerbitzarian"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Ez da konfigurazio-fitxategirik aurkitu \n"
-"egin klik Morroia-n edo Aurreratua-n."
+"Aukeratu auto-detektatutako inprimagailuetako bat zerrendatik edo sartu "
+"ostalari-izena edo IP eta, nahi baduzu, portu zenbakia (jatorrian 9100 da) "
+"eremuetan."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Hautatu babeskopia egiteko datuak..."
+msgid "Where do you want to mount %s?"
+msgstr "Non muntatu nahi duzu %s?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Hautatu babeskopiaren euskarria..."
+msgid "Restore Via Network"
+msgstr "Leheneratu Sarearen Bitartez"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Hautatu leheneratzeko datuak..."
+msgid "Algeria"
+msgstr "Aljeria"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Ondorengo pakete hauek instalatuko dira"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-tamaina"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Okerra FTP bidez fitxategia bidaltzean.\n"
-" Mesedez zuzendu zure FTP konfigurazioa."
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tBabeskopietan erabili tar eta gzip\n"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
-"Errorea sendmail bitartez posta bidaltzean\n"
-" Berri emateko mezua ez da bidali\n"
-" Mesedez konfiguratu posta-bidalketa sendmail bitartez"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "Inprimagailu lehenetsia"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Next"
-msgstr "Hurrengoa"
+msgid "Interface %s (using module %s)"
+msgstr "%s interfazea (%s modulua erabiliz)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Previous"
-msgstr "Aurrekoa"
+msgid "Name: %s\n"
+msgstr "Izena: %s\n"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Save"
-msgstr "Gorde"
+msgid "Generating preview ..."
+msgstr "Aurreikuspena sortzen ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Egin babeskopia"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Restore Progress"
-msgstr "Leheneratze Aurrerapena"
+msgid "serial"
+msgstr "seriekoa"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Leheneratu Katalogotik"
+msgid "DVD-ROM"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Nabigatu leheneratze repositorio berrira."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgiarra (diseinu \"latinoa\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CDa bere lekuan - jarraitu."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Leheneratze pertsonalizatua"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Orain %s moduluaren aukerak ezarri ditzakezu\n"
+"Ohartu sartzen den edozein helbide 0x aurrizkiarekin jarri behar dela, adib. "
+"'0x123'"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Restore all backups"
-msgstr "Leheneratu babeskopia guztiak."
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Leheneraketak Hutsegin du..."
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Files Restored..."
-msgstr "Fitxategiak Leheneratuta..."
+msgid "Use ``Unmount'' first"
+msgstr "Erabili ``Desmuntatu'' lehendabizi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing mtools packages..."
+msgstr "Paketeak instalatzen..."
+
+#: ../../any.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Bidea edo Modulua behar da"
+msgid "You must specify a root partition"
+msgstr "Erroko partizio bat zehaztu behar duzu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Hostname required"
-msgstr "Ostalari-izena behar da"
+msgid "first step creation"
+msgstr "Lehenengo urratsaren sorrera"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Username required"
-msgstr "Erabiltzaile-izena behar da"
+msgid "Both Shift keys simultaneously"
+msgstr "Bi Maius teklak batera"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "Hautatu eskaner bat"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Password required"
-msgstr "Pasahitza behar da"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR Belaunaldi berrikoa"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Ostalari Bide edo Modulua"
+msgid "Drakbackup Configuration"
+msgstr " Drakbackup-en konfigurazioa"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Host Name"
-msgstr "Ostalari Izena"
+msgid "Save as.."
+msgstr "Gorde honela.."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Leheneratu Sareko Protokolo honen bitartez: %s"
+msgid ""
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
+msgstr ""
+"Interfaze hau ez dago konfiguratuta.\n"
+"Abiarazi konfigurazio-morroia leiho nagusian"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Leheneratu Sarearen Bitartez"
+msgid "Korea (North)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ez da zinta etiketa zuzena. Zinta %s etiketa dauka."
+msgid "Autologin"
+msgstr "Automatikoki hasi saioa"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System configuration"
+msgstr "CUPSen konfigurazioa"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
+msgid "Domain Admin Password"
+msgstr "Domeinuko Admin Pasahitza"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Sartu bolumen etiketa %s duen zinta\n"
-" %s zinta unitate gailuan"
+"Mandrake Linux 9.1k erabat aldatu daitezkeen 11 erabiltzaile interfaze "
+"eskaintzen dizkizu: KDE 3, Gnome 2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "\"%s\" inprimagailua ezartzen..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Leheneratu Zintatik"
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ez da CD etiketa zuzena. Diskoak %s etiketa dauka."
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-"Sartu %s bolumen etiketa duen CDa\n"
-" muntaketa puntua /mnt/cdrom duen CD unitatean"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Leheneratu CDtik"
+msgid "Virgin Islands (British)"
+msgstr "Birjina Uharteak (Britainiarrak)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Babestu %s-n aurkitu ez diren fitxategiak."
+msgid "Bermuda"
+msgstr "Bermuda"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr "egin klik hemen, ziur bazaude."
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change\n"
-"Restore Path"
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-"Aldatu\n"
-"Leheneratze Bidea"
+"Ez da konfigurazio-fitxategirik aurkitu \n"
+"egin klik Morroia-n edo Aurreratua-n."
-#: ../../standalone/drakbackup:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
msgstr ""
-"Leheneratu Hautatutako\n"
-"Fitxategiak"
+"Goiko zerrendan zure disko gogorrean detektatutako Linux partizioak daude.\n"
+"Morroiak egindako aukerak manten ditzakezu, egokiak dira instalazio\n"
+"ohikoenetarako. Aldaketarik egiten baduzu, gutxienez erroko partizio bat\n"
+"(\"/\") definitu behar duzu. Ez aukeratu partizio txikiegirik edo ezin\n"
+"izango duzu nahikoa software instalatu. Datuak beste partizio batean\n"
+"biltegiratu nahi badituzu, \"/home\"-rentzako partizio bat ere sortu\n"
+"beharko duzu (Linux partizio bat baino gehiago baduzu soilik da posible).\n"
+"\n"
+"Partizio bakoitza honela zerrendatzen da: \"Izena\", \"Edukiera\".\n"
+"\n"
+"\"Izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko\n"
+"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
+"\n"
+"\"Disko gogorraren mota\" \"hd\" izango da disko gogorra IDE disko gogorra\n"
+"bada, eta \"sd\", SCSI unitatea bada.\n"
+"\n"
+"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\" ren ondoko letra bat\n"
+"izaten da. IDE disko gogorretan:\n"
+"\n"
+" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du;\n"
+"\n"
+" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi\n"
+"du;\n"
+"\n"
+" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi\n"
+"du;\n"
+"\n"
+"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
+"letrak \"bigarren SCSI ID baxuena\", etab."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#, fuzzy, c-format
+msgid "Remove"
+msgstr "Kendu zerrenda"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+msgid "Lesotho"
+msgstr "Lesotho"
+
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
msgstr ""
-"Leheneratu Hautatutako\n"
-"Katalogo Sarrera"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Kendu erabiltzaile-direktorioak leheneratu aurretik."
+msgid "Pipe job into a command"
+msgstr "Kanalizatu lana komando batean"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "kenelaren devfs-k sortutako gailu dinamikoaren izen berria"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Egin babeskopia berria leheneratu aurretik (inkrementaletan soilik.)"
+msgid "Yes"
+msgstr "Bai"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "hautatu leheneratzeko bidea (/ ordez)"
+msgid "Cote d'Ivoire"
+msgstr "Boli Kosta"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Leheneratu bestelakoak"
+msgid "Which protocol do you want to use?"
+msgstr "Zein protokolo erabili nahi duzu?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore Users"
-msgstr "Leheneratu erabiltzaileak"
+msgid "Restore Progress"
+msgstr "Leheneratze Aurrerapena"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore system"
-msgstr "Leheneratu sistema"
+msgid "Estonia"
+msgstr "Estonia"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Other Media"
-msgstr "Beste euskarri bat"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Hautatu beste euskarri bat leheneratzeko"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Hutsune bat duzu partizio-taulan baina ezin dut erabili.\n"
+"Irtenbide bakarra lehen mailako partizioak mugitzea da, hutsunea partizio "
+"hedatuen ondoren gera dadin"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Adierazi zein direktoriotan dauden babeskopiak"
+msgid "Channel"
+msgstr "Kanalea"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Leheneratu disko gogorretik"
+msgid "Add"
+msgstr "Gehitu"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Interneteko konexioa konpartitzea ez da inoiz konfiguratu."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Erabili kuota babeskopia-fitxategientzat"
+msgid " Error while sending mail. \n"
+msgstr " Errorea posta bidaltzean. \n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Teklatua"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Adierazi Drakbackup-en gehieneko\n"
-" tamaina "
+"Sartu %s bolumen etiketa duen CDa\n"
+" muntaketa puntua /mnt/cdrom duen CD unitatean"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Adierazi gorde beharreko direktorioa:"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Erabili disko gogorra babeskopia egiteko"
+msgid "Choose the connection you want to configure"
+msgstr "Aukeratu konfiguratu nahi duzun konexioa"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "aukeratu leheneratzeko data"
+msgid "Please wait, setting security level..."
+msgstr "Itxoin mesedez, segurtasun-maila ezartzen..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Kopiatu sistema-fitxategiak lehenago:"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 garapen plataforma berriena da"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Configuring network device %s"
+msgstr "Sareko %s gailua konfiguratzen"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "aktibatu orain"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
-"Leheneratzeko erabiltzaile-zerrenda (erabiltzaile bakoitzaren datu berrienak "
-"bakarrik dira garrantzitsuak)"
+"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "Ados, leheneratu beste fitxategiak"
+msgid "Finding packages to upgrade..."
+msgstr "Bertsio-berritzeko paketeak bilatzen"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " leheneratzeko konfigurazioa "
+msgid "Mount point: "
+msgstr "Muntatze-puntua: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " behar bezala leheneratu dira hona: %s "
+msgid "parse all fonts"
+msgstr "analizatu letra-tipo guztiak"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Hautatu dituzun datu guztiak izan dira "
+msgid "With X"
+msgstr "Xrekin"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Babeskopien fitxategiak hondatuta daude"
+msgid "Multi-head configuration"
+msgstr "Buru anitzeko konfigurazioa"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Desautatu edo kendu hurrengo aldian."
+msgid "No browser available! Please install one"
+msgstr "Ez dago nabigatzailerik! Instalatu bat mesedez"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
-"List of data corrupted:\n"
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
+"%s"
msgstr ""
-"Hondatutako datuen zerrenda:\n"
+"Aldaketak mantendu?\n"
+"Hau da uneko konfigurazioa:\n"
"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Ezin da ReiserFS erabili 32MB baino gutxiagoko partizioetarako"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"Leheneratu beharreko datuen zerrenda:\n"
-"\n"
+"rwho protokoloak urruneko erabiltzaileei rwho daemon-a (finger-en antzekoa)\n"
+"duen makina batean sartutako erabiltzaile guztien zerrenda eman diezaieke."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ez dago konfiguraziorik, egin klik Morroian edo Aurreratuan.\n"
+msgid "Domain name"
+msgstr "Domeinu-izena:"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Sarea webdav bitartez.\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Sharing of local printers"
+msgstr "Inprimagailu erabilgarriak"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Sarea rsync bitartez.\n"
+#: ../../install_messages.pm:1
+#, fuzzy, c-format
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\tSSH bidezko sarea.\n"
+msgid "Available printers"
+msgstr "Inprimagailu erabilgarriak"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\tFTP bidezko sarea.\n"
+msgid "Empty"
+msgstr "Hutsik"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tape \n"
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROMa.\n"
+msgid "text width"
+msgstr "testu zabalera"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t Disko gogorra.\n"
+msgid "Where do you want to mount device %s?"
+msgstr "Non muntatu nahi duzu %s gailua?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon-ean (%s) sartzen da :\n"
+msgid "The default lease (in seconds)"
+msgstr "Jatorrizko alokatze denbora (segundutan)"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBabeskopietan erabili tar eta gzip\n"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "%s interfazea"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBabeskopietan erabili tar eta bzip2\n"
+msgid "With basic documentation (recommended!)"
+msgstr "Oinarrizko dokumentazioarekin (gomendatua)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tEz sartu sistema-fitxategiak\n"
+msgid "1 button"
+msgstr "Botoi 1"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Options:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Aukerak:\n"
+"%d inprimagailu ezezagun daude zure sistemara zuzenean lotuta"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t erabiltzaile-izena: %s\n"
-"\t\t bide-izena: %s \n"
+msgid "Test"
+msgstr "Froga"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- Save via %s on host: %s\n"
+"Allow/Forbid direct root login."
msgstr ""
-"\n"
-"- Gorde %s bitartez ostalari honetan: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Gehiago"
+
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Zure aukera? (lehenetsia: `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Gorde Zintara gailu honetan: %s"
+msgid "Raw printer"
+msgstr "Inprimagailu \"gordina\""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "gailuaren saltzaile izena"
+
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid " (multi-session)"
-msgstr " (saio-anitza)"
+msgid "Vendor"
+msgstr "Saltzailea"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on device: %s"
-msgstr " gailuan: %s"
+msgid "Interface %s"
+msgstr "%s interfazea"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Configure mouse"
+msgstr "Konfiguratu sagua"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- CD-ra erre"
+msgid "Choose the mount points"
+msgstr "Aukeratu muntatze-puntuak"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Ezabatu disko zurrunetik tar fitxategiak babestu ondoren.\n"
+msgid "OK"
+msgstr "Ados"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Gorde disko gogorrean, bide-izen honetan: %s\n"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslaviarra (latindarra)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Bestelako fitxategiak:\n"
+msgid "Installing"
+msgstr "Instalatzen"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Erabiltzaile-fitxategiak:\n"
+msgid "Launch userdrake"
+msgstr "Abiarazi userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Is this an install or an upgrade?"
+msgstr "Zer egin nahi duzu: instalazioa ala eguneratzea?"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "Barneko ISDN txartela"
+
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"\n"
-"- System Files:\n"
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-"\n"
-"- Sistema-fitxategiak:\n"
+"Zure jakinduria elkarbanatzeko eta Linux tresnak eraikitzen laguntzeko, egin "
+"zaitez gure \"Komunitate\" web-orrian aurkituko dituzun eztabaida-taldeen "
+"partaide"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Backup Sources: \n"
msgstr ""
+"Zorionak, sarearen eta Interneten konfigurazioa amaitu da.\n"
"\n"
-"Babeskopien iturburua: \n"
+"Konfigurazioa zure sistemari aplikatuko zaio orain.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Select user manually"
-msgstr "Hautatu erabiltzailea eskuz"
+msgid "\t-Hard drive.\n"
+msgstr "\t Disko gogorra.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Erabiltzaileen babeskopia"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Sistemaren babeskopia "
+msgid "Printer on remote CUPS server"
+msgstr "Urruneko CUPS zerbitzariko inprimagailua"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Aukeratu zeren kopia egin nahi duzun"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org/GIMP-tik "
+"kentzean."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "on Tape Device"
-msgstr "Zinta Gailuan"
+msgid "delete"
+msgstr "ezabatu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "on CDROM"
-msgstr "CDROMean"
+msgid "here if no."
+msgstr "egin klik hemen, ziur ez bazaude."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "across Network"
-msgstr "sarean zehar"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Ostalari-izena"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on Hard Drive"
-msgstr "disko gogorrean"
+msgid "The maximum lease (in seconds)"
+msgstr "Alokatze denbora handiena (segundutan)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Aukeratu non egin nahi duzun babeskopia"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "More Options"
-msgstr "Aukera gehiago"
+msgid "Did it work properly?"
+msgstr "Ongi egin du?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "When"
-msgstr "Noiz"
+msgid "Poor"
+msgstr "Txikia"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Where"
-msgstr "Non"
+msgid "The DHCP start range"
+msgstr "DHCP-ren eremu hasiera"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "What"
-msgstr "Zer"
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Ezabatu disko zurrunetik tar fitxategiak beste euskarri batera babestu "
-"ondoren."
+msgid "Unsafe"
+msgstr "Ez-segurua"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Babeskopia egindakoan, bidali berri-emateko mezua hona :"
+msgid ", %s sectors"
+msgstr ", %s sektore"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
-msgstr ""
-"Mesedez ziurtatu cron deabrua zure zerbitzuen artean dagoen.\n"
-"\n"
-"Ohartu oraingoz 'sareko' euskarri guztiek disko zurruna erabiltzen dutela."
+msgid "No"
+msgstr "Ez"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Aukeratu babeskopia \n"
-"egiteko euskarria."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Aukeratu babeskopiak egiteko \n"
-"maiztasuna"
+msgid "Guadeloupe"
+msgstr "Guadalupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use daemon"
-msgstr "Erabili daemon-a"
+msgid "could not find any font.\n"
+msgstr "ezin izan da letra-tiporik aurkitu.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "monthly"
-msgstr "hilero"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Atzera-teklak Ezabatu itzultzea nahi duzu kontsolan?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "weekly"
-msgstr "astero"
+msgid "Vertical refresh rate"
+msgstr "Freskatze-maiztasun bertikala"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "daily"
-msgstr "egunero"
+msgid "Entering step `%s'\n"
+msgstr "`%s' urratsean sartzen\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "hourly"
-msgstr "orduero"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing %s ..."
+msgstr "%s kentzen"
+
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "No printer"
+msgstr "Inprimagailurik ez"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Mesedez adierazi zein direktoriotan gorde behar den:"
+msgid "alert configuration"
+msgstr "abisu-konfigurazioa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr ""
-"Mesedez markatu babes-kopia ondoren zure zinta kanporatzea nahi baduzu."
+msgid "NetWare Printer Options"
+msgstr "NetWare inprimagailuaren aukerak"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Mesedez markatu babes-kopia aurretik zinta ezabatu nahi baduzu."
+msgid "%s BootSplash (%s) preview"
+msgstr "%s Bootsplash (%s) aurreikuspena"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Mesedez markatu rebobinatzen ez den gailua erabiltzeko."
+msgid "General"
+msgstr "Orokorra"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Adierazi babeskopiarako erabiliko den gailuaren izena"
+msgid "Printing system: "
+msgstr "Inprimatze-sistema: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Erabili zinta babeskopia egiteko"
+msgid "Add a user"
+msgstr "Gehitu erabiltzaile bat"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Ez da CD gailurik definitu!"
+msgid "Network configuration (%d adapters)"
+msgstr "Sare-konfigurazioa (%d moldagailuak)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Adierazi CD idazgailuaren gailu-izena \n"
-" adib.: 0,1,0"
+msgid "Mandatory package %s is missing"
+msgstr "Derrigorrezko %s paketea falta da"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Mesedez markatu DVDRAM gailua erabiltzen ari bazara"
+msgid "Philippines"
+msgstr "Filipinak"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Mesedez markatu DVDR gailua erabiltzen ari bazara"
+msgid "Ok"
+msgstr "Ados"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
-msgstr " Ezabatu Orain "
+msgid "Print Queue Name"
+msgstr "Inprimaketa-ilararen izena"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Mesedez markatu zure RW eukarria ezabatu nahi baduzu (1. saioa)"
+msgid "Do you want to use aboot?"
+msgstr "aboot erabili nahi duzu?"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Hautatu CDRW euskarria erabiltzen baduzu"
+msgid "Belarusian"
+msgstr "Bielorrusiarra"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Mesedez markatu saio-anitzeko CDa egiteko"
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
+msgstr ""
+"PDQk inprimagailu lokalak, urruneko LPD inprimagailuak eta Socket/TCP "
+"inprimagailuak soilik onartzen ditu.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Mesedez hautatu zure CD/DVD euskarri neurria"
+msgid "Move files to the new partition"
+msgstr "Eraman fitxategiak partizio berrira"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Mesedez hautatu zure CD/DVD gailua\n"
-"(Sartu sakatu ezarpenak beste eremu batzutara hedatzeko.\n"
-"Eremu hau ez da beharrezkoa, formularioa betetzeko tresna bakarrik.)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Erabili CD/DVDROMa babeskopia egiteko"
+msgid "Restore From Catalog"
+msgstr "Leheneratu Katalogotik"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Ostalari-izena, erabiltzaile-izena eta pasahitza behar dira!"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Gogoratu pasahitza"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Sartu pasahitza"
+msgid "group :"
+msgstr "taldea :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Sartu saioa hasteko izena"
+msgid "mounting partition %s in directory %s failed"
+msgstr "%s partizioa %s direktorioan muntatzeak huts egin du"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Mesedez sartu direktorioa (edo modulua) babes-kopia\n"
-" ostalari honetan jartzeko."
+msgid "Lilo screen"
+msgstr "Lilo pantaila"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Idatzi ostalariaren izena edo IPa."
+msgid "LILO with graphical menu"
+msgstr "LILO menu grafikoarekin"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Beste (drakbackup ez)\n"
-"giltzak bere tokian dagoeneko"
+msgid "Estimating"
+msgstr "Kalkulatzen"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
-" Transferitu \n"
-"Orain"
+msgid "You can't unselect this package. It is already installed"
+msgstr "Ezin duzu pakete hau desautatu. Dagoeneko instalatuta dago"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
-"Sortu/Transferitu\n"
-"babeserako giltzak SSH-rentzako"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", \"%s\" inprimagailua \"%s\" SMB/Windows zerbitzarian"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Erabili Expect SSH-rentzako"
+msgid "Go on anyway?"
+msgstr "Jarraitu hala ere?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Sareko Metodoa:"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Pakete erabilgarriak bilatzen eta rpm databaseak berreraikitzen..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Erabili sareko konexioa babeskopia egiteko"
+msgid "Does not appear to be recordable media!"
+msgstr "Ez dirudi euskarri idazgarria denik!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Users"
-msgstr "Erabiltzaileak"
+msgid "Specify options"
+msgstr "Zehaztu aukerak"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementalak (ez ordeztu kopia zaharrak)"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Zerbitzari-izena edo zerbitzariaren IP eman behar da!"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Kendu hautatutakoak"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
+"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
+msgstr ""
+"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
+"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman SILO\n"
+"instalatu nahi ez baduzu, edo beste sistema eragile batek SILO kentzen badu, "
+"edo SILOk\n"
+"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
+"pertsonalizatua Mandrake\n"
+"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
+"larriak\n"
+"errazago gainditu ahal izateko.\n"
+"\n"
+"Zure sistemarako abioko disko bat sortu nahi baduzu, sartu diskete bat "
+"lehen\n"
+"unitatean eta sakatu \"Ados\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Ez sartu arakatzailearen cache-a"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Ezin da fitxategi-sistema enkriptatua erabili %s muntatze-punturako"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Hautatu babeskopian sartu nahi dituzun erabiltzaile guztiak."
+msgid "Norfolk Island"
+msgstr "Norfolk uhartea"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Aukera honekin /etc direktorioaren edozein bertsio leheneratu\n"
-"ahal izango duzu."
+msgid "Theme installation failed!"
+msgstr "Gai instalazioak hutsegin du!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ez sartu fitxategi kritikoak (passwd, group, fstab)"
+msgid "Nothing to do"
+msgstr "Ez dago zer eginik"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementala (ez ordeztu kopia zaharrak)"
+msgid "Use for loopback"
+msgstr "Erabili atzera-begiztarako"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sistema-fitxategien babeskopia egin. (/etc direktorioa )"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandrake Akatsak Jakinarazteko Tresna"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aukera horiek /etc direktorioko fitxategi guztiak kopiatu eta leheneratu "
-"ditzakete.\n"
+msgid "use pppoe"
+msgstr "erabili pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Hautatu behar dituzun aukera guztiak.\n"
+msgid "Moving files to the new partition"
+msgstr "Fitxategiak partizio berrira eramaten"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Hautatu fitxategiak edo direktorioak eta egin klik 'Gehitu'n"
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s 3D hardware-azelerazio ESPERIMENTALAREKIN"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Fitxategi-hautapena"
+msgid "Advanced"
+msgstr "Aurreratua"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Ezin da katalogoa sortu!"
+msgid "Transfer"
+msgstr "Transferitu"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Errorea posta bidaltzean. \n"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (suediarra)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup ekintzak zinta bitartez:\n"
-"\n"
+msgid "More Options"
+msgstr "Aukera gehiago"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup ekintzak CD bitartez:\n"
-"\n"
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-"\n"
-"Drakbackup ekintzak %s bitartez:\n"
-"\n"
+"Ezabatu disko zurrunetik tar fitxategiak beste euskarri batera babestu "
+"ondoren."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"\n"
-" FTP konexio-arazoa: zure babeskopien fitxategiak ezin izan dira bidali FTP "
-"bidez.\n"
+"cron UNIX programa estandar bat da, erabiltzaileak zehaztutako programak\n"
+"programatutako orduan exekutatzen dituena. vixie cron-ek hainbat eginbide \n"
+"gehitzen dizkio oinarrizko UNIX cron-i, hala nola segurtasun hobea eta "
+"konfigurazio-aukera ahaltsuagoak."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
-"FTP bitartez bidalitako fitxategi-zerrenda: %s\n"
-" "
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Ez dago babestu beharreko aldaketarik!"
+msgid "Add Client -->"
+msgstr "Gehitu Bezeroa -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Disko gogorraren babeskopia fitxategiak... "
+msgid "Read carefully!"
+msgstr "Irakurri arretaz"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Beste fitxategi batzuen babeskopia... "
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Disko gogorraren babeskopia egiten..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Idatzi\n"
+"zure TB araua eta estatua"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup User files..."
-msgstr "Erabiltzaile-fitxategien babeskopia... "
+msgid "Port"
+msgstr "Ataka"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup system files..."
-msgstr "Sistema-fitxategien babeskopia"
+msgid "No (experts only)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Zintarik ez %s-n!"
+msgid "No kernel selected!"
+msgstr "Ez da kernelik hautatu!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Baimen arazoa CD atzipenean."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Sakatu sartu hautatutako SE abiarazteko, 'e' abiarazi aurreko"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Euskarria ezabatzeak denbora tarte bat har dezake."
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Ez da euskarri ezabagarria!"
+msgid "The encryption keys do not match"
+msgstr "Enkriptatze-gakoak ez datoz bat"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Ez dirudi euskarri idazgarria denik!"
+msgid "Right \"Windows\" key"
+msgstr "Eskuineko \"Windows\" tekla"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Unitatean ez dago CDR/DVDR!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV transferentziak hutsegin du!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr ""
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Aurrera jarraitu aurretik, arretaz irakurri lizentziaren baldintzak.\n"
+"Mandrake Linux banaketa osoari dagozkio eta baldintza guztiekin ados ez\n"
+"bazaude, egin klik \"Ezetsi\" botoian; horrela berehala amaituko da\n"
+"instalazioa. Instalazioarekin aurrera jarraitzeko, egin klik \"Onartu\"\n"
+"botoian."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Urruneko WebDAV gunea dagoeneko sinkronizatuta!"
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
+msgstr ""
+"Hemen duzu inprimagailu honen inprimatzeko aukeren zerrenda:\n"
+"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Aurrerapen guztia"
+msgid "Resolutions"
+msgstr "Bereizmenak"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall configurator\n"
"\n"
-"without being prompted for a password."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-"Transferentzia arrakastatsua\n"
-"Zerbitzarian saioa hasi dezakezula frogatu dezakezu honela:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall konfiguratzailea\n"
"\n"
-"eta ez zaizu pasahitzik eskatuko."
+"Honek Mandrake Linux makina honentzako suhesi pertsonala konfiguratzen du.\n"
+"Suhesi izatera zuzendutako soluzio ahaltsua nahi baduzu, mesedez begiratu\n"
+"MandrakeSecurity Firewall banaketa espezializatua."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s-k ez du erantzuten"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Mesedez sartu zure erabiltzaile-izena, pasahitza eta domeinu izena ostalari "
+"honetara sartzeko."
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Can't find %s on %s"
-msgstr "Ezin da %s %s-n bilatu"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Kendu hautatutakoak"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "%s %s-ra transferitzeko baimena ukatu da"
+msgid "Network configuration"
+msgstr "Sare-konfigurazioa"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "%s-n pasahitz okerra"
+msgid "No sharing"
+msgstr "Ez konpartitu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Pasahitz eskaririk ez %s-n %s portuan"
+msgid "Move selected rule down one level"
+msgstr "Jaitsi hautatutako araua maila bat"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "OKERRA: Ezin da %s jaurti."
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Honek giltzak sortzeko denbora tarte bat behar du."
+msgid "Please check if you are using a DVDR device"
+msgstr "Mesedez markatu DVDR gailua erabiltzen ari bazara"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s badago, ezabatu?\n"
-"\n"
-"Adi: Dagoeneko prozesu hau burutu baduzu seguraski\n"
-"authorized_keys sarrera purgatu beharko duzu zerbitzarian."
+msgid "FATAL"
+msgstr "LARRIA"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-"\n"
-" DrakBackup-en berri-ematearen xehetasunak\n"
-"\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Ezabatu"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-"\n"
-" DrakBackup Daemon-aren berri-ematea\n"
-"\n"
-"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup-en berri-ematea \n"
-"\n"
+"Ordenagailua abiatzean X automatikoki abiarazteko konfigura dezaket.\n"
+"Berrabiaraztean X hastea nahi duzu?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Sortu disketea"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "FATAL"
-msgstr "LARRIA"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Deskonektatu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ADI"
+msgid "Status:"
+msgstr "Egoera:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron ezin du oraindik erabili root-ek ez bestek"
+msgid "HTTP proxy"
+msgstr "HTTP proxy-a"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%sren instalazioak huts egin du. Errore hau gertatu da:"
+msgid "SSH Server"
+msgstr "SSH Zerbitzaria"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ez, ez dut saioa automatikoki hasi nahi"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Sarea rsync bitartez.\n"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Bai, automatikoki honekin hasi nahi dut (erabiltzailea, mahaigaina)"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Europako protokoloa"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Abiarazi X-Window sistema hasieran"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", \"%s\" inprimagailua \"%s\" zerbitzarian"
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Sistema modua"
+msgid "Error"
+msgstr "Errorea"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "onartu \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo pantaila"
+msgid "Australia"
+msgstr "Australia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Hautatu gai bat\n"
-"lilo eta bootsplash-entzat,\n"
-"bakoitzarena banaka\n"
-"hautatu dezakezu"
+msgid "please wait during ttmkfdir..."
+msgstr "itxaron... ttmkfdir egin bitartean..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Gaiak"
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfiguratu \"%s\"%s txartela soilik"
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Splash selection"
-msgstr "Splash hautaketa"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Level"
+msgstr "maila"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Change the printing system"
+msgstr "Aldatu inprimatzeko sistema"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"Orain %s erabiltzen ari zara Abioko Kudeatzaile gisa.\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo eta Bootsplash gai instalazio arrakastatsua"
+"Zure sistemak buru anitzeko konfigurazioa onartzen du.\n"
+"Zer egin nahi duzu?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Gai instalazioak hutsegin du!"
+msgid "Configure services"
+msgstr "Konfiguratu zerbitzuak"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Oharra"
+msgid "Broadcast Address:"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Berriro jaurti 'lilo'"
+msgid "mount failed: "
+msgstr "muntatzeak huts egin du: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Ezin da LiLo berriro jaurti!\n"
-"Jaurti \"lilo\" root bezala komando lerroan LiLo gai instalazioa osatzeko."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Imajina"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-"Eraiki RAMdiskoa (initrd) honekin 'mkinitrd -f /boot/initrd-%s.img %s'."
+"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org/GIMP-n "
+"gehitzean."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Ezin da mkinitrd -f /boot/initrd-%s.img %s jaurti."
+msgid "Remote Administration"
+msgstr "Urruneko administrazioa"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"Ezin da /etc/sysconfig/bootsplash idatzi\n"
-"Ez da fitxategia aurkitu."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr "PCMCIA euskarririk ez dago 2.2 nukleoentzat. Erabili 2.4 nukleoa."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "Idatzi %s"
+msgid "Selected All"
+msgstr "Hautatutako guztiak"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Ezin da /etc/sysconfig/bootsplash idatzi."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Ez da lilo mezua aurkitzen"
+msgid "Webmin Service"
+msgstr "Webmin Zerbitzua"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopiatu %s %s-ra"
+msgid "device"
+msgstr "gailua"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Babestu %s %s.old bezala"
+msgid "All"
+msgstr "Denak"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Gai berria sortu"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Zein inprimatze-sistema (spooler) erabili nahi duzu?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Erakutsi gaia\n"
-"kontsolapean"
+msgid "Greece"
+msgstr "Grezia"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Instalatu gaiak"
+msgid "An error occurred"
+msgstr "Errore bat izan da"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modua"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Pakete hau bertsio-berritu beharrean dago\n"
+"Ziur zaude desautatu nahi duzula?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "armeniarra (idazmakina)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modua"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "Printer manufacturer, model, driver"
+msgstr "Inprimagailuaren fabrikatzailea, modeloa, kontrolatzailea"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fitxategia/I_rten"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Ez dago euskarririk edo idazketarako babestuta dago %s gailuan.\n"
+"Sartu bat mesedez."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Fitxategia"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+" %s direktorioak baditu datu batzuk\n"
+"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Abioko estilo-konfigurazioa"
+msgid "Printer on NetWare server"
+msgstr "NetWare zerbitzariko inprimagailua"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Ez dago nabigatzailerik! Instalatu bat mesedez"
+msgid "Give the ram size in MB"
+msgstr "Eman ram-tamaina MBtan"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "Bugzilla morroira konektatzen ..."
+msgid "Real name"
+msgstr "Benetako izena"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Instalatu gabe"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "done"
+msgstr "eginda"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not installed"
-msgstr "Instalatu gabe"
+msgid "Please uncheck or remove it on next time."
+msgstr "Desautatu edo kendu hurrengo aldian."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Tresna Autonomoak"
+msgid "Higher"
+msgstr "Handiagoa"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Report"
-msgstr "Txostena"
+msgid "Choose the partitions you want to format"
+msgstr "Aukeratu formateatu nahi dituzun partizioak"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Zure makinan ez da TB txartelik aurkitu. Ziurtatu Linux-ek onartzen duen "
+"Bideo/TB txartela ondo konektatuta dagoela.\n"
"\n"
"\n"
-"Akats txosten bat bidaltzeko, klikatu txosten botoia.\n"
-"Honek web nabigatzailearen leiho batean https://drakbug.mandrakesoft.com\n"
-" zabalduko du, bertan bete beharreko inprimakia aurkituko duzu. Gainean \n"
-"erakusten den informazioa zerbitzari hartara bidaliko da\n"
+"Gure hardware datubasea bisitatu dezakezu:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Release: "
-msgstr "Bertsioa: "
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Kernel:"
-msgstr "Kernela:"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Package: "
-msgstr "Paketea: "
+msgid "Can't find %s on %s"
+msgstr "Ezin da %s %s-n bilatu"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Application:"
-msgstr "Aplikazioa:"
+msgid "Japanese 106 keys"
+msgstr "Japoniarra 106 tekla"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Ezarpen Morroia"
+msgid "This will take a few minutes."
+msgstr "Honek minutu batzuk beharko ditu."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Windows Migrazio tresna"
+msgid "Use scanners on remote computers"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Delete selected rule"
+msgstr "Ezabatu hautatutako araua"
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Software Manager"
-msgstr "Software Kudeatzailea"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Urruneko CUPS zerbitzariko inprimagailua"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Urruneko Agintea"
+msgid "Insert a floppy in %s"
+msgstr "Sartu diskete bat %s unitatean"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Msec"
-msgstr "Mseg"
+msgid "Maldives"
+msgstr "Maldivak"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "compact"
+msgstr "trinkotu"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "1 minute"
+msgstr "minutu bat"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "on channel %d id %d\n"
+msgstr "%d kanalean id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Sinkronizazio tresna"
+msgid ", multi-function device"
+msgstr ", funtzio anitzeko gailua"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Lehen Aldikorako Morroia"
+msgid "Laos"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandrake-ren Kontrol Zentroa"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
+"erabiltzeko (edo ez dago nahikoa leku)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandrake Akatsak Jakinarazteko Tresna"
+msgid "Up"
+msgstr "Gora"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parametroak"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Suebakia/Bidatzailea"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
+msgid "Area:"
+msgstr "Area :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP bezeroa"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet txartela"
+msgid "Printer Server"
+msgstr "Inprimagailu-zerbitzaria"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Atebidea"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Konexio-mota: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "abisu-konfigurazioa"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Profila: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint-Pierre eta Mikelune"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-"Ez duzu Interneteko konexiorik.\n"
-"Sortu bat lehendabizi, 'Konfiguratu'n klik eginda"
+"\n"
+"Leheneratze-arazoak:\n"
+"\n"
+"Leheneratze-urratsean, Drakbackup-ek babeskopia-fitxategi\n"
+"guztiak egiaztatuko ditu leheneratu aurretik.\n"
+"Leheneratu aurretik, Drakbackup-ek kendu egingo du\n"
+"jatorrizko direktorioa, eta datu guztiak galduko dituzu.\n"
+"Garrantzizkoa da kontuz ibiltzea eta babeskopia-fitxategiak\n"
+"eskuz ez aldatzea.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfaze hau ez dago konfiguratuta.\n"
-"Abiarazi konfigurazio-morroia leiho nagusian"
+msgid "saving Bootsplash theme..."
+msgstr "Abiapen-irudi gaia gordetzen..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktibatu orain"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "desaktibatu orain"
+msgid "Do you have another one?"
+msgstr "Baduzu besterik?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP bezeroa"
+msgid ", printing to %s"
+msgstr ", %s atakan"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Idatzi ostalariaren izena edo IPa."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Abioan abiaraztekoa"
+msgid "Toggle to normal mode"
+msgstr "Aldatu modu normalera"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Abioko protokoloa"
+msgid "Generic"
+msgstr "Generikoa"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s moldagailua: %s"
+msgid "Cylinder %d to %d\n"
+msgstr "%d zilindrotik %d zilindrora\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
+msgid "New profile..."
+msgstr "Profil berria..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
+msgid "Which disk do you want to move it to?"
+msgstr "Zein diskotara eraman nahi duzu?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu interfaze konfiguraturik.\n"
-"Konfigura itzazu lehendabizi, 'Konfiguratu'n klik eginda"
+msgid "Display logo on Console"
+msgstr "Erakutsi logoa Kontsolan"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connect..."
-msgstr "Konektatu..."
+msgid "Windows Domain"
+msgstr "Windows Domeinua"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "%s interfazea (%s modulua erabiliz)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Deskonektatu..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Wallis eta Futuna uharteak"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Not connected"
-msgstr "Konektatu gabe"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "\"/etc/dhcpd.conf\" sortu behar da lehenbizi!"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Connected"
-msgstr "Konektatuta"
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Ez dira inprimagailurik aurkitu zure makinara zuzenean lotuta"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
-"ariko da"
+"Ez dago zerbitzu honi buruzko\n"
+"informazio gehiago."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Interfazea:"
+msgid "Build Single NIC -->"
+msgstr "Eraiki NIC Bakarri -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Atebidea:"
+msgid "Is this correct?"
+msgstr "Zuzena da?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Aplikatu"
+msgid "Marshall Islands"
+msgstr "Marshall uharteak"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Egin klik hemen morroia abiarazteko ->"
+msgid "Windows (FAT32)"
+msgstr "Windows(FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Morroia..."
+msgid "Root password"
+msgstr "Ezarri root-aren pasahitza"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Egoera:"
+msgid "Build All Kernels -->"
+msgstr "Eraiki Kernel Guztiak -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Mota:"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Interneterako sarbidea"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Ez duzu swap partiziorik\n"
+"\n"
+"Jarraitu hala ere?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Hostname: "
-msgstr "Ostalari-izena: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "NCP zerbitzari-izena falta da!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfiguratu sare lokala..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "State"
-msgstr "Egoera"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Gaitu CDtik abiaraztea?"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Kontrolatzailea"
+msgid "Graphical Environment"
+msgstr "Ingurune grafikoa"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokoloa"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interfazea"
+msgid "on Tape Device"
+msgstr "Zinta Gailuan"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfiguratu Interneterako sarbidea..."
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "bat ez badatoz"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Wait please"
-msgstr "Itxaron"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "<-- Ezabatu Bezeroa"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Sortu beharreko profilaren izena (profil berria oraingoaren kopia gisa "
-"sortuko da) :"
+msgid "Filesystem type: "
+msgstr "Fitxategi-sistemaren mota: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Profil berria..."
+msgid "Starting network..."
+msgstr "Sarea abiarazten ..."
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Profile to delete:"
-msgstr "Ezabatu beharreko profila:"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Azalpena"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Del profile..."
-msgstr "Ezabatu profila..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimizatu zure segurtasuna"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Sare-konfigurazioa (%d moldagailuak)"
+msgid "Help"
+msgstr "Laguntza"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Zure telefono-zenbakia"
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Which size do you want to keep for Windows on"
+msgstr "Zein tamaina utzi nahi duzu Windows-entzat"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Ezin da mkbootdisk behar bezala itxi: \n"
-" %s \n"
-" %s"
+"Proba-orria(k) inprimagailura bidali dira.\n"
+"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ezin da bikoiztu: %s"
+msgid "Username required"
+msgstr "Erabiltzaile-izena behar da"
-#: ../../standalone/drakfloppy:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Ez dago euskarririk edo idazketarako babestuta dago %s gailuan.\n"
-"Sartu bat mesedez."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Egiaztatu %s gailuak euskarria baduela"
+"Normalean, DrakXk teklatu egokia hautatuko dizu (aukeratutako hizkuntzaren\n"
+"arabera) eta urrats hau ikusi ere ez duzu egingo. Dena den, baliteke zure\n"
+"hizkuntzari zehazki dagokion teklatua ez edukitzea: adibidez, ingelesez\n"
+"dakien suitzarra bazara, hizkuntza ingelesa hautatu arren Suitzako teklatua\n"
+"nahi izango duzu seguru asko. Edo ingeles hiztuna bazara baina Quebec-en\n"
+"bazaude, egoera berean egon zintezke. Bi kasuetan, instalazio-urrats\n"
+"honetan atzera jo eta teklatu egokia hautatu beharko duzu zerrendan.\n"
+"\n"
+"Egin klik \"Gehiago\" botoian onartzen diren teklatuen zerrenda osoa\n"
+"ikusteko."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Sortu disketea"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) inprimagailuaren aukerak"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Irteera"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Kendu modulua"
+msgid "mkinitrd optional arguments"
+msgstr "aukerako mkinitrd argumentuak"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Gehitu modulua"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "jaramonik ez scsi moduluei"
+msgid "Protocol for the rest of the world"
+msgstr "Munduko gainerako protokoloa"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "beharrezkoa bada"
+msgid "Print test pages"
+msgstr "Inprimatu proba-orriak"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "jaramonik ez raid moduluei"
+msgid "64 MB or more"
+msgstr "64 MB edo gehiago"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "behartu"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Hautatu inprimatu nahi dituzun proba-orriak.\n"
+"Kontuan hartu: argazkien proba-orriak denbora asko behar izan dezake "
+"inprimatzeko, eta memoria gutxiko laser inprimagailuetan baliteke ez "
+"ateratzea ere. Gehienetan nahikoa izaten da proba-orri estandarra "
+"inprimatzea."
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "aukerako mkinitrd argumentuak"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
+"Scannerdrake-k ezin izan du zure %s eskanerra detektatu.\n"
+"Mesedez aukeratu zure eskanerra konektatuta dagoen gailua"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Aditu area"
+msgid "Not formatted\n"
+msgstr "Formateatu gabe\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "nukleo-bertsioa"
+msgid "Periodic Checks"
+msgstr "Aldizkako Egiaztapenak"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "lehenetsia"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "dhcpd Zerbitzari Konfigurazioa"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Orokorra"
+msgid "Backup the system files before:"
+msgstr "Kopiatu sistema-fitxategiak lehenago:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "abioko disketea sortu"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Hau da Internetera bezero gisa konektatzeko erabiliko diren "
+"ordenagailuentzat gomendatzen den segurtasun estandarra. "
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Lehen diskete-unitatea"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Tamaina"
+msgid "/File/_Quit"
+msgstr "/Fitxategia/I_rten"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Modulu-izena"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Posta-desinstalazioa"
+msgid "Choose the new size"
+msgstr "Aukeratu tamaina berria"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Kendu zure sistemako letra-tipoak"
+msgid "Media class"
+msgstr "Euskarri mota"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Initial tests"
-msgstr "Hasierako probak"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Mandrake Linux bertsio honek ez du %s onartzen."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Posta-instalazioa"
+msgid "Faroe Islands"
+msgstr "Faroe uharteak"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalatu eta bihurtu letra-tipoak"
+msgid "Restart XFS"
+msgstr "Berrabiarazi XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiatu zure sistemako letra-tipoak"
+msgid "Add host/network"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Kendu zerrenda"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Hautatutako guztiak"
+msgid "Please enter the directory to save to:"
+msgstr "Mesedez adierazi zein direktoriotan gorde behar den:"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Unselected All"
-msgstr "Desautatutako guztiak"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Modulu-izena"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "egin klik hemen, ziur ez bazaude."
+msgid "Albania"
+msgstr "Albania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "egin klik hemen, ziur bazaude."
+msgid "No CDR/DVDR in drive!"
+msgstr "Unitatean ez dago CDR/DVDR!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Instalatu zerrenda"
+msgid "British Indian Ocean Territory"
+msgstr "Indiako Ozeanoko Britainiar Lurraldea"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Hautatu letra-tipoen fitxategia edo direktorioa eta egin klik 'Gehitu'n"
+msgid "Normal Mode"
+msgstr "Modu normala"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Letra-tipoak instalatu aurretik, ziurtatu sisteman erabili eta instalatzeko "
-"baimena duzula.\n"
+"Mesedez ziurtatu cron deabrua zure zerbitzuen artean dagoen.\n"
"\n"
-"-Letra-tipoak instalatzeko ohiko era erabil dezakezu. Oso gutxitan, akastun "
-"letra-tipoek zure X Zerbitzaria blokea dezakete."
+"Ohartu oraingoz 'sareko' euskarri guztiek disko zurruna erabiltzen dutela."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Inprimagailu generikoak"
+msgid "Printer connection type"
+msgstr "Inprimagailuaren konexio-mota"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Ez dago sare-moldagailurik zure sisteman!"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Sarea"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Hautatu letra-tipoak onartuko dituzten aplikazioak :"
+msgid "Option %s out of range!"
+msgstr "%s aukera barrutitik kanpo dago!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
-" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
-" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
-" baldintzak betez gero.\n"
-"\n"
-" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
-" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
-" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
-" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
-"\n"
-" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
-" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
+msgid "Connect %s"
+msgstr "Konektatu"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "About"
-msgstr "Abortatu"
+msgid "Restarting CUPS..."
+msgstr "Berrabiarazi XFS"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Letra-tipoen zerrenda"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Inprimatzeko/Eskaneatzeko/Argazki Txartelak \"%s\"-n"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Aukera aurreratuak"
+msgid "Duplicate mount point %s"
+msgstr "Bikoiztu %s muntatze-puntua"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstalatu letra-tipoak"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Hartu Windows letra-tipoak"
+msgid "Connection Configuration"
+msgstr "Konexioaren konfigurazioa"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Letra-tipoen inportazioa"
+msgid "Unknown|Generic"
+msgstr "Ezezaguna|Generikoa"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "done"
-msgstr "eginda"
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Mandrake Linux instalatzen duzunean, litekeena da pakete batzuk aldatu\n"
+"izana hasierako argitalpenetik. Beharbada akats batzuk konponduko ziren,\n"
+"eta segurtasun-arazoak gaindituko ziren. Eguneratzeez baliatu ahal izan\n"
+"zaitezen, Internetik deskargatzea gomendatzen dizugu. Aukeratu \"Bai\"\n"
+"Interneteko konexioa martxan badaukazu, edo \"Ez\" pakete eguneratuak\n"
+"geroago instalatu nahi badituzu.\n"
+"\n"
+"\"Bai\" aukeratzen baduzu, eguneratzeak eskaintzen dituzten lekuen zerrenda\n"
+"azalduko da. Aukeratu zuregandik hurbilen dagoena. Paketeak hautatzeko\n"
+"zuhaitza agertuko da orduan: egin hautapena eta sakatu \"Instalatu\"\n"
+"hautatutako paketeak hartu eta instalatzeko, edo \"Utzi\" abortatzeko."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs berrabiarazi"
+msgid "Quit"
+msgstr "Irten"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Ezabatu letra-tipoen fitxategiak"
+msgid "Myanmar"
+msgstr "Birmania"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Berrabiarazi XFS"
+msgid "Auto allocate"
+msgstr "Auto-esleitu"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Ezabatu aldi baterako fitxategiak"
+msgid "Check bad blocks?"
+msgstr "Bloke txarrak egiaztatu?"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "type1inst building"
-msgstr "type1inst eraikitzen"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Beste euskarri bat"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm letra-tipoen bihurketa"
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "(makina honetan)"
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf letra-tipoen bihurketa"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Ongi etorri Inprimagailu Ezarpen Morroira\n"
+"\n"
+"Morroi honek zure konputagailu honetara lotutako inprimagailua(k) "
+"instalatzen lagunduko dizu.\n"
+"\n"
+"Makina honetara lotutako inprimagailuak badituzu, mesedez entxufatu eta "
+"piztu itzazu auto-detektatuak izan daitezen.\n"
+"\n"
+" Klikatu \"Hurrengoa\" prest zaudenean, eta \"Etsi\" zure inprimagailua "
+"orain ezarri nahi ez duzunean."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript erreferentzia"
+msgid "Authentication NIS"
+msgstr "NIS Autentifikazioa"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Letra-tipoen bihurketa"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"``Murriztu komando-lerroko aukerak'' aukera ezin da erabili pasahitzik gabe"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "True Type instalazioa eginda"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Interneteko konexioa konpartitzea gaituta dago orain"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "itxaron... ttmkfdir egin bitartean..."
+msgid "Card IO_0"
+msgstr "Txartelaren S/I_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "True Type letra-tipoen instalazioa"
+msgid "United Arab Emirates"
+msgstr "Arabiar Emirerri Batuak"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Letra-tipoen kopia"
+msgid "Card IO_1"
+msgstr "Txartelaren S/I_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Bilatu letra-tipoak instalatutakoen zerrendan"
+msgid "Thailand"
+msgstr "Thailandia"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "ezin izan da letra-tiporik aurkitu.\n"
+msgid "Routers:"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Hautatu berriro letra-tipo egokiak"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Display all available remote CUPS printers"
+msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
+
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "ezin izan da letra-tiporik aurkitu muntatutako partizioetan"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux-en %s instalazioa"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "ez da letra-tiporik aurkitu"
+msgid "Thai keyboard"
+msgstr "Thailandiako teklatua"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "analizatu letra-tipo guztiak"
+msgid "Dialup options"
+msgstr "Telefonoz deitzeko aukerak"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Desautatu instalatutako letra-tipoak"
+msgid "Bouvet Island"
+msgstr "Bouvet uhartea"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Bilatu instalatutako letra-tipoak"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Ongi etorri Interneteko konexioa konpartitzeko utilitatera!\n"
-"\n"
-"%s\n"
+"Aldatu CDROMa!\n"
"\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Interneteko konexioa konpartitzeko konfigurazioa"
+"Sartu \"%s\" etiketa duen CDROMa unitatean eta sakatu Ados.\n"
+"Ez baduzu, sakatu Utzi instalazioa CDROM horretatik egin ez dezan."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneteko konexioa konpartitzea ez da inoiz konfiguratu."
+msgid "Polish"
+msgstr "poloniarra"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurazioa eginda dago, eta orain gaituta dago."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurazioa eginda dago, baina orain desgaituta dago."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Sarea webdav bitartez.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Dena konfiguratu da.\n"
-"Orain Interneteko konexioa konparti dezakezu sare lokaleko beste ordenagailu "
-"batzuekin, sare-konfigurazio automatikoa (DHCP) erabiliz."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Arazoa %s paketea instalatzean"
+"Zure sisteman ez da ethernet sare-moldagailurik detektatu. Exekutatu "
+"hardwarea konfiguratzeko tresna."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Script-ak konfiguratzen, softwarea instalatzen, zerbitzariak abiarazten..."
+msgid "Netmask"
+msgstr "Sare-maskara"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Konfiguratzen..."
+msgid "No hard drives found"
+msgstr "Ez da disko zurrunik aurkitu"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"LAN helbide-gatazka potentziala aurkitu da %s(r)en uneko konfigurazioan!\n"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Sare lokalak ez du `.0' amaieran; irteten. "
+msgid "2 buttons"
+msgstr "2 botoi"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Birkonfiguratu interfazea eta DHCP zerbitzaria"
+msgid "What kind is your ISDN connection?"
+msgstr "Nolakoa da zure ISDN konexioa?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Alokatze denbora handiena (segundutan)"
+msgid "Label"
+msgstr "Etiketa"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Jatorrizko alokatze denbora (segundutan)"
+msgid "Save on floppy"
+msgstr "Gorde disketean"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "DHCP-ren eremu amaiera"
+msgid "Printer auto-detection"
+msgstr "Inprimagailuen auto-detekzioa"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "Zein da zure ISDN txartela?"
+
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP start range"
-msgstr "DHCP-ren eremu hasiera"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak konpartitzeko.\n"
+"Zerbitzu honek NFS zerbitzariaren funtzionaltasuna (/etc/exports "
+"fitxategian\n"
+"konfiguratua) eskaintzen du."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The internal domain name"
-msgstr "Barneko domeinu izena"
+msgid "Msec"
+msgstr "Mseg"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS Zerbitzariaren IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Kontuz, etiketa bat aldatu da:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "DHCP zerbitzariaren IPa"
+msgid "Number of capture buffers:"
+msgstr "Eskuratze buffer kopurua :"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Zure aukera? (0/1, lehenetsia `%s' da) "
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"DHCP Zerbitzari Konfigurazioa.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Hemen DHCP zerbitzari konfiguraziorako aukera desberdinak hautatu "
-"ditzakezu.\n"
-"Aukera baten esanahia ulertzen ez baduzu, utzi dagoen bezela.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Bertako Sare helbidea"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Uneko konfigurazioa gorde eta DHCP zerbitzari bat konfiguratuta duzula jo "
-"dezaket; hala bada, ziurtatu ondo irakurri dudala zure bertoko sare bezala "
-"erabiltzen duzun sarea; ez dut birkonfiguratuko ez eta zure DHCP "
-"zerbitzariaren konfigurazioa ukituko.\n"
+"Partizio definitu berriak formateatu egin behar dira erabili ahal izateko\n"
+"(formateatzeak fitxategi-sistema sortzea esan nahi du).\n"
"\n"
-"Jatorrian DNS sarrera suhesian konfiguratuta dagoen IzenZerbitzari "
-"Katxeatzailea da. Hura ordezkatu dezakezu zure ISP-aren DNS IP-arekin "
-"adibidez.\n"
+"Une honetan, lehendik dauden partizio batzuei berriro formatua eman nahi\n"
+"izango diezu beharbada, dauzkaten datuak ezabatzeko. Hori egin nahi baduzu,\n"
+"hauta itzazu partizio horiek ere.\n"
"\n"
-"Bestela, zure interfazea birkonfiguratu dezaket eta zure DHCP zerbitzaria "
-"zuretzako (bir)konfiguratu.\n"
+"Kontuan izan ez dela beharrezkoa lehendik dauden partizio guztiei berriro\n"
+"formatua ematea. Sistema eragilea daukaten partizioak berriro formateatu\n"
+"behar dituzu (esaterako \"/\", \"/usr\" edo \"/var\"), baina ez mantendu\n"
+"nahi dituzun datuak dituztenak (adibide tipikoa \"/home\" da).\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
+"Kontuz ibili partizioak hautatzean. Formateatu ondoren, hautatutako\n"
+"partizioetako datu guztiak ezabatu egingo dira eta ezin izango duzu bat ere\n"
+"berreskuratu.\n"
"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' - uneko konfigurazioa:\n"
+"Sakatu \"Ados\" partizioak formateatzeko prest zaudenean.\n"
"\n"
-"Sarea: %s\n"
-"IP helbidea: %s\n"
-"IP atribuzioa: %s\n"
-"Kontrolatzailea: %s"
+"Sakatu \"Utzi\" Mandrake Linux sistema eragile berria instalatzeko beste\n"
+"partizio bat aukeratu nahi baduzu.\n"
+"\n"
+"Sakatu \"Aurreratua\" partizio batzuk aztertu nahi badituzu hondatutako\n"
+"blokerik duten ikusteko."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "frantsesa"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Txekiarra (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Erakutsi uneko interfaze-konfigurazioa"
+msgid "Hardware probing in progress"
+msgstr "Detekzio martxan"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Xinetd Zerbitzua"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Erakutsi uneko interfaze-konfigurazioa"
+msgid "Summary"
+msgstr "Laburpena"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No (experts only)"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
+" (Ataka paraleloak: /dev/lp0, /dev/lp1..., baliokideak dira LPT1:, LPT2:..., "
+"lehen USB inprimagailua: /dev/usb/lp0, 2. USB inprimagailua: /dev/usb/"
+"lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Birkonfigurazio automatikoa"
+msgid "Next"
+msgstr "Hurrengoa"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Abioko kargatzailea ezin da %s partizio batean instalatu\n"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Kontuz, sare-moldagailua (%s) jadanik konfiguratuta dago.\n"
"\n"
-"Automatikoki birkonfiguratu nahi duzu?\n"
+"Ongi etorri.\n"
"\n"
-"Eskuz egin dezakezu, baldin eta zertan zabiltzan badakizu."
+"Auto-instalazioko parametroak ezkerreko sekzioetan daude erabilgarri"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Sareko interfazea konfiguratuta dago"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Aukeratu zein sare-moldagailu konektatuko den zure sare lokalarekin."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"ondo lanegin dezan ImageMagick paketea behar da.\n"
+"Klikatu \"Ados\" 'ImageMagick' instalatzeko edo \"Etsi\" irtetzeko"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituaniako QWERTY \"ilara numerikoa\""
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Sare-moldagailu konfiguratu bakarra dago zure sisteman:\n"
+"Ondorengo paketeak zure sistema eguneratu ahal izateko ezabatuko dira: %s\n"
"\n"
-"%s\n"
"\n"
-"Zure sare lokala moldagailu horrekin konfiguratzera noa."
+"Pakete hauek ezabatu nahi dituzu?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Sare-interfazea"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS domeinua"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu. Exekutatu "
-"hardwarea konfiguratzeko tresna."
+"\n"
+"- Erabiltzaile-fitxategiak:\n"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ez dago sare-moldagailurik zure sisteman!"
+msgid "Antarctica"
+msgstr "Antartika"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "%s interfazea"
+msgid "Mount options"
+msgstr "Muntatze-aukerak"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s interfazea (%s modulua erabiliz)"
+msgid "Jamaica"
+msgstr "Jamaika"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Xinetd Zerbitzua"
-
-#: ../../standalone/drakgw:1
-#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
+"Esleitu gailu \"gordinak\" (raw devices) blokeko gailuei \n"
+"(disko gogorreko partizioak adib.), Oracle bezalako aplikazioentzat."
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Zure konputagailua Interneteko konexioa banatu dezan konfiguratzera zoaz.\n"
-"Eginbide horrekin, zure bertoko sareko konputagailuek zure konputagailuaren "
-"Internet konexioa erabili ahal izango dute.\n"
-"\n"
-"Zure Sare/Internet sarbidea drakconnect erabiliz konfiguratu duzula\n"
-"ziurtatu aurrera egin aurretik.\n"
-"\n"
-"Adi: Sare-moldagailu dedikatu bat behar duzu Bertako Eremuko Sare (LAN) bat "
-"konfiguratzeko."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Interneteko konexioa konpartitzea"
+msgid "Please wait, preparing installation..."
+msgstr "Itxaron, instalazioa prestatzen"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain."
+msgid "Czech (QWERTZ)"
+msgstr "txekiarra (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Zerbitzariak gaitzen..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Sare-txartelaren identifikazioa (eramangarrientzat baliagarria)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "itxi"
+msgid "The port number should be an integer!"
+msgstr "Ataka-zenbakiak osoko zenbakia izan behar du!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "birkonfiguratu"
+msgid "You must choose an image file first!"
+msgstr "Irudi fitxategi bat hautatu behar duzu lehenik!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "gaitu"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Desgaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
+msgid "Restore from Hard Disk."
+msgstr "Leheneratu disko gogorretik"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain"
+msgid "Add to LVM"
+msgstr "Gehitu LVMri"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain."
+msgid "DNS server"
+msgstr "DNS zerbitzaria"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Zerbitzariak desgaitzen..."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad eta Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "desgaitu"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPDk eta LPRng-ek ez dute IPP inprimagailurik onartzen.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Gaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
+msgid "simple"
+msgstr "sinplea"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain"
+msgid "Clear all"
+msgstr "Garbitu dena"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Barkatu, 2.4 kernelak onartzen ditugu soilik."
+msgid "No test pages"
+msgstr "Proba-orririk ez"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "%s moldagailua: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Bidea"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falkland uharteak (Malvinak)"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "taldea :"
+msgid "Unknown model"
+msgstr "Modelo ezezaguna"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "Erabiltzailea :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "Bide hautaketa"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Autentifikazioa"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "Markatuta dagoenean, jabea eta taldea ez dira aldatuko"
+msgid "Backup Now"
+msgstr "Egin babeskopia orain"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Erabili taldearen id exekuziorako"
+msgid "/_File"
+msgstr "/_Fitxategia"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Erabili jabearen id exekuziorako"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Inprimagailua Star Office/OpenOffice.org/GIMP-tik kentzen"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-"Direktorioentzako erabilia:\n"
-" direktorio edo fitxategiaren jabeak bakarrik direktorio honetan ezabatu "
-"dezake"
+"Abiarazi Linux-nukleoen 2.2 serieko pakete-iragazketa, zure \n"
+"makina sareko erasoetatik babesteko suebaki bat ezartzeko."
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamila (TSCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "bit-likatsua"
+msgid "Creating auto install floppy..."
+msgstr "Auto-instalazioko disketea sortzen..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Inprimagailu erabilgarriak"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Partitioning"
+msgstr "Inprimatzea"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Russia"
+msgstr "errusiarra"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Property"
-msgstr "Propietatea"
+msgid "ethernet card(s) detected"
+msgstr "ethernet txartela(k) detektatuta"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Permissions"
-msgstr "Baimenak"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current user"
-msgstr "Uneko erabiltzailea"
+msgid "Can't create catalog!"
+msgstr "Ezin da katalogoa sortu!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "browse"
-msgstr "arakatu"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Editatu uneko araua"
+msgid "Not enough free space for auto-allocating"
+msgstr "Ez dago nahikoa leku libre auto-esleitzeko"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "edit"
-msgstr "editatu"
+msgid "Set root password"
+msgstr "Ezarri root-aren pasahitza"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Ez dago OSS/ALSA gidari alternatibo ezagunik zure (%s) soinu "
+"txartelarentzat, orain \"%s\" erabiltzen du"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Ezabatu hautatutako araua"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"%s partizioa tamainaz aldatu ondoren, partizioko datu guztiak galdu egingo "
+"dira"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "delete"
-msgstr "ezabatu"
+msgid "Internet connection configuration"
+msgstr "Interneteko konexioaren konfigurazioa"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Gehitu arau berri bat amaieran"
+msgid "Scanning for TV channels"
+msgstr "TB kanalak bilatzen"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "add a rule"
-msgstr "Arau bat gehitu"
+msgid "Kernel:"
+msgstr "Kernela:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Jaitsi hautatutako araua maila bat"
+msgid "/_About..."
+msgstr "/_Honi buruz..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Down"
-msgstr "Bera"
+msgid "Bengali"
+msgstr "Bengaliarra"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Igo hautatutako araua maila bat"
+msgid "Preference: "
+msgstr "Hobespena: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr "Gora"
+msgid "Wizard..."
+msgstr "Morroia..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "hautatu ikusi/editatzeko fitxategia"
+msgid "Services: %d activated for %d registered"
+msgstr "Zerbitzuak: %d aktibatuta / %d erregistratuta"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm fitxategien ezaugarriak aldatzeko erabiltzen da, baimenak, jabeak, "
-"eta taldeak, hori msec bitartez egiten du.\n"
-"Jatorrizko arauak gainidatziko dituzte zure arau propioak editatu ditzakezu."
+msgid "Create a bootdisk"
+msgstr "Sortu abioko disko bat"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "permissions"
-msgstr "baimenak"
+msgid "Solomon Islands"
+msgstr "Salomon uharteak"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "group"
-msgstr "taldea"
+msgid "(module %s)"
+msgstr "(%s modulua)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "user"
-msgstr "Erabiltzailea"
+msgid "Workgroup"
+msgstr "Lantaldea"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "bidea"
+msgid "Printer host name or IP"
+msgstr "Inprimagailuaren ostalari-izena edo IP"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Auto-instalazioko disketea sortzen"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Host Path or Module"
+msgstr "Ostalari Bide edo Modulua"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
+"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Show current interface configuration"
+msgstr "Erakutsi uneko interfaze-konfigurazioa"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Ez da inprimagairik aurkitu!"
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "Garapena"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "Eginda"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Web Server"
+msgstr "Web Zerbitzaria"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP-ren eremu amaiera"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr "\tEz sartu sistema-fitxategiak\n"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP-ren eremu hasiera"
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Txile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "%s interfazea (%s modulua erabiliz)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
+"Lexmark-en Inkjet inprimagailu-kontrolatzaileek inprimagailu lokalak soilik "
+"onartzen dituzte, ez urruneko makinetako inprimagailuak edo inprimaketa-"
+"zerbitzariak. Konektatu zure inprimagailua ataka lokal batera edo konfigura "
+"ezazu konektatuta dagoen makinan."
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Zure konputagailua Interneteko konexioa banatu dezan konfiguratzera zoaz.\n"
-"Eginbide horrekin, zure bertoko sareko konputagailuek zure konputagailuaren "
-"Internet konexioa erabili ahal izango dute.\n"
-"\n"
-"Zure Sare/Internet sarbidea drakconnect erabiliz konfiguratu duzula\n"
-"ziurtatu aurrera egin aurretik.\n"
+"Zure funtzio-anitzeko gailua automatikoki konfiguratu zen eskaneatu ahal "
+"izateko. Orain \"scanimage\"rekin eskanea dezakezu (\"scanimage -d hp:%s\" "
+"eskanerra zehazteko, bat baino gehiago badituzu) komando-lerrotik edo "
+"\"xscanimage\" edo \"xsane\" interfaze grafikoekin. GIMP erabiltzen baduzu, "
+"\"File\"/\"Acquire\" menuko puntu egokiaren bidez ere eskanea dezakezu. "
+"Informazio gehiago nahi baduzu, deitu \"man scanimage\" komando-lerroan.\n"
"\n"
-"Adi: Sare-moldagailu dedikatu bat behar duzu Bertako Eremuko Sare (LAN) bat "
-"konfiguratzeko."
+"Ez erabili \"scannerdrake\" gailu honekin!"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "dhcpd Zerbitzari Konfigurazioa"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr "(%s jadanik gehituta)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "dhcpd Zerbitzari Konfigurazioa"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ", %s komandoaren bidez"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Itxoin mesedez, segurtasun aukerak ezartzen..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt eta Maius teklak batera"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Itxoin mesedez, segurtasun-maila ezartzen..."
+msgid "Flags"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Aldizkako Egiaztapenak"
+msgid "Add/Del Users"
+msgstr "Gehitu/Ezabatu erabiltzaileak"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Sistemaren Aukerak"
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "Sareko Aukerak"
+msgid "weekly"
+msgstr "astero"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Ezarpenak"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
+
+#: ../../any.pm:1
#, fuzzy, c-format
+msgid "Here is the full list of available countries"
+msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Proba-orri alternatiboa (A4)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Ondorengo aukerak ezarri daitezke zure sistemaren segurtasuna\n"
-"moldatzeko. Azalpenak behar badituzu, klikatu Laguntza.\n"
+"Beheko zerrendako CD guztiak badituzu, sakatu Ados.\n"
+"CD horietako bat ere ez baduzu, sakatu Utzi.\n"
+"CDetako batzuk soilik falta badituzu, desauta itzazu, eta sakatu Ados."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Segurtasun Kudeatzailea:"
+msgid "Wait please"
+msgstr "Itxaron"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Segurtasun Alertak:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Segurtasun-maila:"
+msgid "Backup user files"
+msgstr "Erabiltzaile-fitxategien babeskopia"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (jatorrian: %s)"
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "New"
+msgstr "Berria"
-#: ../../standalone/draksec:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Estandarra: Hau da internetera bezero bezala konektatuko den konputagailu "
-"batentzako\n"
-" segurtasun estandarra.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Altua: Muga batzuk ezartzen ditu, eta egiaztapen automatiko gehiago "
-"exekutatzen dira gauero.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Altuagoa: Sistemak segurtasun maila nahikoa dauka bezero askoren lotura "
-"onartuko duen zerbitzari\n"
-" bezala erabil dadin. Zure makina Interneten bezero soila "
-"badamaila apalagoa hautatu behar zenuke.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Paranoikoa: Hau aurreko mailaren antzekoa da, baino sistema erabat itxita "
-"dago eta segurtasun\n"
-" ezaugarriak mailarik altuenean daude.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Segurtasun Kudeatzailea:\n"
-" 'Segurtasun Alertak' aukera ezartzen bada, segurtasun "
-"alertak bidaliko zaizkio erabiltzaile honi (erabiltzaile-izena edo\n"
-"\t posta-e)."
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Hau da erabakigunerik funtsezkoena GNU/Linux sistemaren segurtasunerako:\n"
+"\"root\"-aren pasahitza adierazi behar duzu. \"root\"\n"
+"sistema-administratzailea da eta berak bakarrik dauka sistema eguneratzeko,\n"
+"erabiltzaileak gehitzeko, konfigurazio orokorra aldatzeko eta abar egiteko\n"
+"baimena. Labur esanda, \"root\"-ak edozer egin dezake! Horregatik, asmatzen\n"
+"zaila den pasahitza aukeratu behar duzu - errazegia bada, DrakXk abisatuko\n"
+"dizu. Ikus dezakezunez, pasahitzik ez sartzea aukera dezakezu, baina\n"
+"horrelakorik ez egiteko aholkua ematen dizugu, arrazoi batengatik: ez\n"
+"pentsa GNU/Linux-ekin abiarazi duzulako zure beste sistema eragileek\n"
+"akatsik eduki ezin dutenik. \"root\"-ak muga guztiak gaindi ditzakeenez,\n"
+"eta partizioetan arduragabeki sartuz partizioetako datu guztiak nahi gabe\n"
+"ezaba ditzakeenez, garrantzitsua da \"root\" bilakatzea zaila izatea.\n"
"\n"
+"Pasahitzak gutxienez 8 karaktere izatea komeni da, letrak eta zenbakiak\n"
+"nahasian. Ez inoiz idatzi \"root\"-aren pasahitza paperean - sistema\n"
+"errazegi konprometituko bailuke.\n"
"\n"
+"Dena den, ez egin pasahitz luzeegia edo konplikatuegia, ahalegin handirik\n"
+"gabe gogoratzeko gai izan behar duzulako.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Pasahitza ez da idatzi ahala pantailan bistaratuko. Horregatik, pasahitza\n"
+"bi aldiz idatzi beharko duzu, akats tipografikoen aukera murrizteko. Akats\n"
+"tipografiko bera bi aldiz egiten baduzu, pasahitz ``oker'' hori erabili\n"
+"beharko duzu konektatzen zaren lehen aldian.\n"
"\n"
+"Aditu moduan, NIS edo LDAP moduko autentifikazio-zerbitzari batekin\n"
+"konektatuko zaren galdetuko zaizu.\n"
"\n"
+"Zure sareak LDAP (edo NIS) protokoloa erabiltzen badu autentifikatzeko,\n"
+"hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ez badakizu, galdetu\n"
+"sare-administratzaileari.\n"
"\n"
-"Adi: ISA PnP soinu txartela badaukazu, sndconfig programa erabili beharko "
-"duzu. Idatzi \"sndconfig\" kontsola batean."
+"Zure ordenagailua administratutako sare batekin konektatuta ez badago,\n"
+"beharbada \"Fitxategi lokalak\" aukeratu nahi izango dituzu\n"
+"autentifikaziorako."
-#: ../../standalone/draksound:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Zure makinan ez da Soinu Txartelik aurkitu. Ziurtatu Linux-ek onartzen duen "
-"Soinu Txartela ondo konektatuta dagoela.\n"
-"\n"
-"\n"
-"Gure hardware datubasea bisitatu dezakezu hemen:\n"
+"Honaino iritsita, ordenagailuarentzat nahi duzun segurtasun-maila\n"
+"aukeratzeko garaia da. Oro har, makina zenbat eta babesgabeago egon eta\n"
+"zenbat eta funtsezko datu gehiago eduki biltegiratuta, orduan eta\n"
+"segurtasun-maila handiagoa behar da. Bestalde, segurtasun-maila handia,\n"
+"erabiltzeko erraztasunaren kalterako izan ohi da. Ikus ``Erreferentziako\n"
+"eskuliburua''ren \"msec\" atala maila horien esanahiari buruzko informazio\n"
+"gehiago lortzeko.\n"
"\n"
+"Zer aukeratu ez badakizu, eutsi aukera lehenetsiari."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Disketetik kargatu"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr ""
+"Ondorengo inprimagailuak\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/draksound:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "Ez da Soinu Txartelik aurkitu!"
+msgid "Boot Floppy"
+msgstr "Abiapen Disketea"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s Bootsplash (%s) aurreikuspena"
+msgid "Norwegian"
+msgstr "norvegiarra"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Inprimagailu erabilgarriak"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Aurreikuspena sortzen ..."
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Zerbitzaria"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Irudi fitxategi bat hautatu behar duzu lehenik!"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "AurrearpenBarraren kolore aukeraketa"
+msgid "select path to restore (instead of /)"
+msgstr "hautatu leheneratzeko bidea (/ ordez)"
#: ../../standalone/draksplash:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Gai honek ez dauka oraindik abiapen-irudirik %s-n!"
+msgid "Configure bootsplash picture"
+msgstr "Abiapen-irudia konfiguratu"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "Abiapen-irudi gaia gordetzen..."
+msgid "China"
+msgstr "Txina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose image file"
-msgstr "aukeratu irudi fitxategia"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Ziurtatu zure inprimagailu guztiak lotuta eta piztuta daudela).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Georgia"
+
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "aukeratu irudi fitxategia"
+msgid "Reading data of installed printers..."
+msgstr "Inprimagailu erabilgarriak"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure bootsplash picture"
-msgstr "Abiapen-irudia konfiguratu"
+msgid " Erase Now "
+msgstr " Ezabatu Orain "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Egin kernel mezua isila jatorrian"
+msgid "server"
+msgstr "zerbitzaria"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Erakutsi logoa Kontsolan"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Sartu FAT formatuko diskete bat %s unitatean"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose color"
-msgstr "Aukeratu kolorea"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Save theme"
-msgstr "gaia gorde"
+msgid "Please Wait... Applying the configuration"
+msgstr "Itxaron... Konfigurazioa aplikatzen"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Preview"
-msgstr "aurreikusi"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Ongi etorri GRUB sistema eragilearen aukeratzailera!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "aurrerapen-barraren kolorea"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "aurrerapen-barraren garaiera"
+msgid "SCSI controllers"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "aurrerapen-barraren zabalera"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "\"%s\" LPD zerbitzarian, \"%s\" inprimagailua"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
msgstr ""
-"aurrerapen-barraren goi eta\n"
-"ezker ertzaren y koordenatua"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Ostalari-izena"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"aurrerapen-barraren goi eta\n"
-"ezker ertzaren x koordenatua"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP helbideak 1.2.3.4 formatua izan behar du"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "text box height"
-msgstr "testu-lauki garaiera"
+msgid "Ecuador"
+msgstr "Ekuador"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text width"
-msgstr "testu zabalera"
+msgid "Add an item"
+msgstr "Gehitu elementu bat"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"testu-laukiaren y koordenatua\n"
-"karaktere kopurutan"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "I can't find needed image file `%s'."
+msgstr "Ezin da aurkitu `%s' imajina-fitxategia, eta beharrezkoa da."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"Ez da soinu-txartelik detektatu. Instalazioa egin ondoren, saiatu \"harddrake"
+"\"rekin "
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-"testu-laukiaren x koordenatua\n"
-"karaktere kopurutan"
+"Portu onartezina: %s.\n"
+"Formatu egokiak \"portua/tcp\" edo \"portu/udp\" dira,\n"
+"non portua 1 eta 65535 artean dagoen."
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid "Browse"
-msgstr "Arakatu"
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/draksplash:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Gaiaren izena"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "final resolution"
-msgstr "azken erresoluzioa"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome eta Principe"
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "first step creation"
-msgstr "Lehenengo urratsaren sorrera"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Ezin sartu %s erabiltzaile-izena erabilita (pasahitz okerra?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "Azerbaidjani (latin)"
+msgstr "azerbaijandarra (latinoa)"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package not installed"
+msgstr "Instalatu gabe"
+
+#: ../../share/advertising/12-mdkexpert.pl:1
+#, c-format
+msgid "Become a MandrakeExpert"
+msgstr "Bilakatu zaitez MandrakeExpert"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "American Samoa"
+msgstr "Samoa amerikarra"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr "Protokoloa"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Copy fonts on your system"
+msgstr "Kopiatu zure sistemako letra-tipoak"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Harddrake help"
+msgstr "Harddrake laguntza"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Bogomips"
msgstr ""
-"ondo lanegin dezan ImageMagick paketea behar da.\n"
-"Klikatu \"Ados\" 'ImageMagick' instalatzeko edo \"Etsi\" irtetzeko"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Mandrake Terminal Zerbitzariaren Ezarpena"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
"\n"
-"\n"
-"You can visit our hardware database at:\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Zure makinan ez da TB txartelik aurkitu. Ziurtatu Linux-ek onartzen duen "
-"Bideo/TB txartela ondo konektatuta dagoela.\n"
"\n"
-"\n"
-"Gure hardware datubasea bisitatu dezakezu:\n"
+" DrakBackup-en berri-ematearen xehetasunak\n"
"\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Ez da TB txartelik aurkitu!"
+msgid "Restore all backups"
+msgstr "Leheneratu babeskopia guztiak."
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Orain xawtv erabili dezakezu (X Window barruan) !\n"
+msgid "if set to yes, check open ports."
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Egun ona izan!"
+msgid "This may take a moment to erase the media."
+msgstr "Euskarria ezabatzeak denbora tarte bat har dezake."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ez dago instalatuta!"
+msgid "You can't select/unselect this package"
+msgstr "Ezin duzu pakete hau hautatu/desautatu"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Errore bat izan da TB kateak bilatzerakoan"
+msgid "Warning"
+msgstr "Kontuz"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "TB kanalak bilatzen"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
+"\n"
+"- Bestelako fitxategiak:\n"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "TB kanalak bilatzen..."
+msgid "Remote host name"
+msgstr "Urruneko ostalari-izena"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Area:"
-msgstr "Area :"
+msgid "deactivate now"
+msgstr "desaktibatu orain"
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "TV norm:"
-msgstr "TB araua :"
+msgid "access to X programs"
+msgstr "X programen atzipena"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Idatzi\n"
-"zure TB araua eta estatua"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Erabili Windows-en partizioko leku librea"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australiako Optus kable TB"
+msgid "Italy"
+msgstr "Italia"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "Zeelanda Berria"
+msgid "Name of printer"
+msgstr "Inprimagailuaren izena"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Frantzia [SECAM]"
+msgid "disable"
+msgstr "desgaitu"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "East Europe"
-msgstr "Europa Ekialdea"
+msgid "error unmounting %s: %s"
+msgstr "errorea %s desmuntatzean: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr "Europa Mendebaldea"
+msgid "Do it!"
+msgstr "Egin!"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Txina (bcast)"
+msgid "Cayman Islands"
+msgstr "Kaiman uharteak"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japonia (kablea)"
+msgid "%s not responding"
+msgstr "%s-k ez du erantzuten"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japonia (bcast)"
+msgid "Select model manually"
+msgstr "Hautatu modeloa eskuz"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kablea)"
+msgid "Format"
+msgstr "Formateatu"
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "AEB (kablea-hrc)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"adsl-rekin konektatzeko modurik ohikoena pppoe da.\n"
+"Konexio batzuek pptp erabiltzen dute, bakan batzuek dhcp.\n"
+"Ez badakizu, aukeratu 'erabili pppoe'"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "AEB (kablea)"
+msgid "Various"
+msgstr "Hainbat"
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "AEB (bcast)"
+msgid "Zip"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
"\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"XawTV ez dago instalatuta!\n"
-"\n"
-"\n"
-"TB txartela badaukazu baino DrakX-ek ez badudu detektatu (bttv edo saa7134 "
-"modulurik ez\n"
-"\"/etc/modules\" kokapenean) ez eta xawtv instalatu ere, mesedez bidali\n"
-"\"lspcidrake -v -f\"-ek sortzen duen irteera \"install\\@mandrakesoft.com\"\n"
-"helbidera gai bezala \"undetected TV card\" jarrita.\n"
-"\n"
-"\n"
-"XawTV instalatu dezakezu kontsolatik root bezala \"urpmi xawtv\" idatzita."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
-msgstr "lehenengo mailakoa"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "secondary"
-msgstr "bigarren mailakoa"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
+"\n"
+"Markatu transferitu nahi dituzun inprimagailuak eta sakatu\n"
+"\"Transferitu\"."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Modelo ezezaguna"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Modelo ezezaguna"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Running \"%s\" ..."
-msgstr "\"%s\" exekutatzen ..."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Run config tool"
-msgstr "Exekutatu ezarpen tresna"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Konfiguratu modulua"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "Informazioa"
+msgid "Albanian"
+msgstr "albaniarra"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Detektatu hardwarea"
+msgid "Lithuania"
+msgstr "Lituania"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 bertsioa "
+msgid "Compact"
+msgstr "Trinkoa"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Detekzio martxan"
+msgid "Detected model: %s %s"
+msgstr "Detektatutako eredua: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "Egilea:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
#: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
"HardDrake da hau, Mandrakeren hardware ezarpen tresna bat.\n"
"Bertsioa:"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Harddrakeri buruz"
+msgid "Local files"
+msgstr "Fitxategi lokalak"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Honi buruz..."
+msgid "maybe"
+msgstr "beharbada"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Akatsa Txostendu"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
+"Dirudienez zure txartela grafikoak TV-OUT konektorea dauka.\n"
+"Frame-bufferra erabiliz lanegin dezan konfiguratu daiteke.\n"
+"\n"
+"Honetarako txartela grafikoa TBri lotu behar diozu konputagailua abiatu "
+"aurretik.\n"
+"Ondoren hautatu \"TVout\" sarrera abiapen-zamatzailean\n"
+"\n"
+"Ezaugarri hau badaukazu?"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Hautatu eskaner bat"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Monitorea"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-"Eremuen deskribapena:\n"
+"Windows-eko pasahitza duen kontu bati inprimaketa ezartzera zoaz. Samba "
+"bezeroaren softwareak daukan egitura akats batek eraginda, pasahitza ageriko "
+"testu bezala jartzen da, Windows zerbitzarira inprimaketa lana bidaltzen "
+"duen Samba bezeroaren komando lerroan. Beraz makina hau erabiltzen duen "
+"edozein erabiltzailek pasahitza pantailan erakutsi dezake \"ps auxwww\" "
+"bezalako komandoak erabiliz.\n"
+"\n"
+"Aukera hauetako bat erabiltzea gomendatzen dugu (edozein modutara ziurtatu "
+"behar duzu zure bertoko sareko makinek soilik dutela zure Windows "
+"zerbitzarira sarrera, adibidez suhesi baten bitartez):\n"
+"\n"
+"Erabili pasahitzik-gabeko kontua zure Windows zerbitzarian, \"GUEST\" kontua "
+"esaterako, edo inprimatzeko sortutako kontu berezia. Ez ezabatu pasahitz "
+"babesa kontu pertsonal bati edo administradore kontuari.\n"
+"\n"
+"Ezarri zure Windows zerbitzaria, inprimagailua LPD protokoloarekin "
+"eskuragarri egon dadin. Ezarri gero inprimagailua makina honetan \"%s\" "
+"koneksio motarekin Printdraken.\n"
"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake laguntza"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Azalpena"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mila kolore (16 bit)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Help"
-msgstr "/_Laguntza"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Gorde disko gogorrean, bide-izen honetan: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Irten"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Auto-detektatuta"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Auto-detektatuta"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Auto-detektatuta"
+msgid "Size: %d KB\n"
+msgstr "Tamaina: %d KB\n"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/_Options"
-msgstr "/_Aukerak"
+msgid "Remove fonts on your system"
+msgstr "Kendu zure sistemako letra-tipoak"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the vendor name of the processor"
-msgstr "gailuaren saltzaile izena"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Kontuz, sare-moldagailua (%s) jadanik konfiguratuta dago.\n"
+"\n"
+"Automatikoki birkonfiguratu nahi duzu?\n"
+"\n"
+"Eskuz egin dezakezu, baldin eta zertan zabiltzan badakizu."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "gailuaren saltzaile izena"
+msgid "Graphical interface at startup"
+msgstr "X abioan"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the directory to save:"
+msgstr "Adierazi gorde beharreko direktorioa:"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "kargatzeko ezarpenak"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of the processor"
-msgstr "aurrerapen-barraren kolorea"
+#: ../../raid.pm:1
+#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ez dago nahikoa partizio %d RAID mailarako\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"Ondoko inprimagailuak daude konfiguratuta. Ezarpenak aldatzeko, inprimagailu "
+"bat lehenesteko edo informazioa ikusteko, egin klik bikoitza inprimagailu "
+"batean."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr ", \"%s\" sareko inprimagailua, %s portua"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "gailuaren saltzaile izena"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Izena: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "aurrerapen-barraren kolorea"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Number of buttons"
-msgstr "Botoi kopurua"
+msgid "Connected"
+msgstr "Konektatuta"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Official vendor name of the cpu"
-msgstr "gailuaren saltzaile izena"
+msgid "USB printer \\#%s"
+msgstr "\\/*%s USB inprimagailua"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modulu-izena"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Macedonian"
+msgstr "Mazedoniarra"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Model"
-msgstr "Eredua"
+msgid "/File/_Save"
+msgstr "/Fitxategia/_Gorde"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "disko zurrun eredua"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "Xehetasunak"
+
+#: ../../pkgs.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr "hardware gailu klasea"
+msgid "very nice"
+msgstr "oso baliagarria"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Media class"
-msgstr "Euskarri mota"
+msgid "Preview"
+msgstr "aurreikusi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+msgid "Remote Control"
+msgstr "Urruneko Agintea"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "maila"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please select media for backup..."
+msgstr "Hautatu babeskopiaren euskarria..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 zerbitzaria: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formateatu"
+msgid "Allow Thin Clients"
+msgstr "Gehitu/Ezabatu Bezeroak"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgiarra (diseinu \"errusiarra\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Aukerak"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Your printer model"
+msgstr "Zure inprimagailu-modeloa"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "F00f bug"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
+"\n"
+"\n"
+"(KONTUZ! XFS erabiltzen ari zara erroko partizioan,\n"
+"abioko diskoa 1,44 Mb-ko disketean sortzeak huts egingo du\n"
+"seguru asko, XFSk oso kontrolatzaile handia behar duelako)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
+"\n"
+"- Ezabatu disko zurrunetik tar fitxategiak babestu ondoren.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandrake Terminal Zerbitzariaren Ezarpena"
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Save"
+msgstr "Gorde"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "The %s is unsupported"
+msgstr "%s eskaner hori ez da onartzen"
+
+#: ../../services.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Kargatu USB gailuen kontrolatzaileak."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Daniarra"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Adierazi inprimagailuaren URI bat"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Fdiv bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
+"MandrakeSoft-en arrakastaren funtsa software librearen printzipioa da. Zure "
+"sistema eragile berria mundu osoko Linux komunitatearen elkarlanaren emaitza "
+"da"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "French Guiana"
+msgstr "Guyana frantsesa"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "gailu hori gobernatzen duen GNU/Linux kernelaren modulua"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Module"
-msgstr "Modulua"
+msgid "add a rule"
+msgstr "Arau bat gehitu"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "kenelaren devfs-k sortutako gailu dinamikoaren izen berria"
+msgid "A command line must be entered!"
+msgstr "Baliozko URI bat sartu behar da!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New devfs device"
-msgstr "devfs gailu berria"
+msgid "Select user manually"
+msgstr "Hautatu erabiltzailea eskuz"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "dev paketean erabiltzen den gailu estatikoaren izen zaharra"
+msgid "Transfer printer configuration"
+msgstr "Transferitu inprimagailu-konfigurazioa"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Gailu fitxategi zaharra"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Inprimaketa gaitu nahi duzu goian aipatutako inprimagailuetan?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "This field describes the device"
-msgstr "eremu honek gailua deskribatzen du"
-
-#: ../../standalone/harddrake2:1
-#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
+"Honek W2K Domeinuko Kontrolatzaile Nagusi (PDC) batekin lanegin dezan, "
+"seguraski zure administratzaileak C:\\>net localgroup \"Pre-Windows 2000 "
+"Compatible Access\" everyone /add exekutatu beharko du eta ondoren "
+"zerbitzaria berrabiatu.\n"
+"Era berean Domeinuko Admin baten erabiltzaile-izen/pasahitza beharko dituzu "
+"makina Windows(TM) domeinura batzeko.\n"
+"Sarea oraindik gaitu gabe badago, Drakx saiatuko da domeinura batzen sareko "
+"ezarpen urratsaren ondoren.\n"
+"Ezarpen honek, edozein arrazoi medio, hutsegingo balu eta domeinu "
+"autentifikazioa ez badabil, exekutatu 'smbpasswd -j DOMEINUA -U ERABILTZAILEA"
+"%PASAHITZA' zure Windows(tm) Domeinua, eta Admin Erabiltzaile-izen/Pasahitza "
+"erabiliz, sistema abiatu ondoren.\n"
+"'wbinfo -t' komandoak autentifikazioaren sekretuak zuzenak diren frogatuko "
+"du."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Ataka"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Use network connection to backup"
+msgstr "Erabili sareko konexioa babeskopia egiteko"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Segurtasun-maila"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
+"Sisteman zein programa instalatu nahi dituzun zehazteko garaia da. Milaka\n"
+"pakete daude Mandrake Linux-entzat erabilgarri, eta ez duzu denak buruz\n"
+"jakin beharrik.\n"
+"\n"
+"CD-ROMetik instalazio estandarra egiten ari bazara, lehendabizi orain\n"
+"dituzun CDak zehazteko eskatuko zaizu (Aditu moduan soilik). Begiratu CDen\n"
+"etiketei eta nabarmendu instalaziorako erabilgarri dituzun CDei dagozkien\n"
+"laukiak. Jarraitzeko prest zaudenean, egin klik \"Ados\" botoian.\n"
+"\n"
+"Paketeak taldeka antolatuta daude, ordenagailuaren erabilera zehatzen\n"
+"arabera. Taldeak lau ataletan sailkatzen dira:\n"
+"\n"
+" * \"Laneko estazioa\": makina lan-estazio gisa erabiltzeko asmoa baduzu,\n"
+"hautatu hauetako talde bat edo gehiago;\n"
+"\n"
+" * \"Garapena\": ordenagailua programatzeko erabili behar baduzu, aukeratu\n"
+"nahi dituzun taldeak;\n"
+"\n"
+" * \"Zerbitzaria\": makina zerbitzari moduan erabili nahi baduzu, hemen\n"
+"hauta ditzakezu instalatu nahi dituzun zerbitzu ohikoenak;\n"
+"\n"
+" * \"Ingurune grafikoa\": azkenik, hemen hautatuko duzu zure ingurune\n"
+"grafiko gogokoena. Gutxienez bat hautatu behar duzu, lan-estazio grafikoa\n"
+"eduki nahi baduzu!\n"
+"\n"
+"Saguaren kurtsorea talde-izen baten gainera eramanez, talde horri buruzko\n"
+"azalpen-testu labur bat bistaratuko da. Instalazio arrunta egitean (hau da,\n"
+"bertsio-berritzea ez denean) talde guztiak desautatzen badituzu,\n"
+"elkarrizketa-koadro bat agertuko da instalazio minimoa egiteko aukerak\n"
+"proposatuz:\n"
+"\n"
+" * \"Xrekin\": ahalik eta pakete gutxien instalatu, mahaigain grafikoa\n"
+"edukitzeko behar direnak bakarrik;\n"
+"\n"
+" * \"Oinarrizko dokumentazioarekin\": oinarrizko sistema eta oinarrizko\n"
+"utilitateak eta horien dokumentazioa instalatzen du. Instalazio hau egokia\n"
+"da zerbitzaria konfiguratzeko;\n"
+"\n"
+" * \"Instalazio minimo-minimoa\": Linux sistema eragileak\n"
+"komando-lerroarekin soilik funtziona dezan bene-benetan beharrezkoa dena\n"
+"bakarrik instalatzen du. Instalazio honek 65 Mb inguru hartzen ditu.\n"
+"\n"
+"\"Pakete indibidualen hautapena\" laukia hauta dezakezu; oso erabilgarria\n"
+"izango zaizu eskaintzen diren paketeak ezagutzen badituzu, edo instalatuko\n"
+"den guztia erabat kontrolatu nahi baduzu.\n"
+"\n"
+"Instalazioa \"Bertsio-berritze\" moduan hasi baduzu, talde guztiak desauta\n"
+"ditzakezu beste paketerik instala ez dadin. Erabilgarria da lehendik dagoen\n"
+"sistema bat konpontzeko edo eguneratzeko."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Accept user"
+msgstr "Onartu erabiltzailea"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Server"
+msgstr "Zerbitzaria"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Aukera okerra, saiatu berriro\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Heard and McDonald Islands"
+msgstr "Heard uhartea eta McDonald uharteak"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "Ez dago gidari alternatiborik"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Aldatu aditu modura"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(makina honetan)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "zatiaren tamaina"
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Atariaren helbidea 1.2.3.4 formatuan egon behar luke"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-"- pci gailuak: txartela honen PCI zirritua, gailua eta funtzioa ematen du\n"
-"- eide gailuak: gailua nagusia edo morroia da\n"
-"- scsi gailuak: scsi busa eta scsi gailu id-ak"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Location on the bus"
-msgstr "Busean kokapena"
+msgid "Looking at packages already installed..."
+msgstr "Instalatutako paketeen artean bilatzen..."
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
msgstr ""
-"- PCI eta USB gailuak: honek saltzaile, gailu, azpi-saltzaile eta azpi-gailu "
-"PCI/USB id-ak zerrendatzen ditu"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Bus identification"
-msgstr "Bus identifikazioa"
+msgid "Driver"
+msgstr "Kontrolatzailea"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
+"Linuxconf-ek batzuetan hainbat ataza egiten ditu abioan\n"
+"sistemaren konfigurazioa mantentzeko."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Urruneko lpd zerbitzariko inprimagailua"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI kanalea"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
+"Letra-tipoak instalatu aurretik, ziurtatu sisteman erabili eta instalatzeko "
+"baimena duzula.\n"
+"\n"
+"-Letra-tipoak instalatzeko ohiko era erabil dezakezu. Oso gutxitan, akastun "
+"letra-tipoek zure X Zerbitzaria blokea dezakete."
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Channel"
-msgstr "Kanalea"
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot NewWorld MacIntosh hardwarerako abioko kargatzaile bat da.\n"
+"GNU/Linux, MacOS, edo MacOSX abiaraz dezake, ordenagailuan egonez gero.\n"
+"Normalean, beste sistema eragile horiek ongi detektatzen eta instalatzen\n"
+"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi dezakezu.\n"
+"Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
+"\n"
+"Yaboot-en aukera nagusiak hauek dira:\n"
+"\n"
+" * Hasierako mezua: abioko gonbitaren aurretik agertzen den testu-mezu soil\n"
+"bat;\n"
+"\n"
+" * Abioko gailua: GNU/Linux-ekin abiarazteko behar den informazioa non\n"
+"kokatu nahi duzun adierazten du. Normalean, lehenago bootstrap partizio bat\n"
+"konfiguratuko duzu informazio hori edukitzeko.\n"
+"\n"
+" * Open Firmware-ren atzerapena: LILOrekin ez bezala, bi atzerapen daude\n"
+"erabilgarri yaboot-ekin. Lehen atzerapena segundotan neurtzen da, eta hemen\n"
+"CD, OF abioa MacOS edo Linux aukera dezakezu;\n"
+"\n"
+" * Nukleoaren abioaren denbora-muga: denbora-muga hau LILOren abioko\n"
+"atzerapenaren antzekoa da. Linux hautatu ondoren, 0,1 segundoko atzerapena\n"
+"izango duzu lehenetsitako nukleo-deskribapena hautatu aurretik;\n"
+"\n"
+" * Gaitu CDtik abiaraztea?: aukera hau hautatzen baduzu, ``C'' aukeratu\n"
+"ahal izango duzu CDarentzat abioko lehen gonbitean;\n"
+"\n"
+" * Gaitu OF abiaraztea?: aukera hau hautatzen baduzu, ``N'' aukeratu ahal\n"
+"izango duzu Open Firmware-rentzat abioko lehen gonbitean;\n"
+"\n"
+" * SE lehenetsia: lehenespenez zein SE abiaraziko den hauta dezakezu Open\n"
+"Firmware Atzerapena igarotzen denean."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "hau da gailua lotzen den bus fisikoa (adib: PCI, USB, ...)"
+msgid "No mouse"
+msgstr "Sagurik gabe"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Busa"
+msgid "Germany"
+msgstr "Alemania"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "Soinu txartel honentzako gidari alternatiboen zerrenda"
+msgid "Austria"
+msgstr "Austria"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Gidari alternatiboak"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Instalazioa egindakoan, exekutatu \"sndconfig\" soinu-txartela "
+"konfiguratzeko "
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Atzera-teklak Ezabatu itzultzea nahi duzu kontsolan?"
+msgid "Collapse Tree"
+msgstr "Tolestu zuhaitza"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
+msgid "Auto Install Configurator"
+msgstr "Instalazio automatikoaren konfiguratzailea"
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ezin da bertsio-berritzea abiarazi!!!\n"
+msgid "Configure networking"
+msgstr "Konfiguratu sarea"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "Non instalatu nahi duzu abioko kargatzailea?"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Sartu instalazioko CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi bertsio-berritzea saihesteko."
+"Aukeratu instalaziorako eta sisteman erabiltzeko nahi duzun hizkuntza.\n"
+"\n"
+"\"Aurreratua\" botoian klik eginez, lan-estazioan instalatzeko beste\n"
+"hizkuntza batzuk hautatu ahal izango dituzu. Beste hizkuntzaren bat\n"
+"hautatzean, sistemaren dokumentaziorako eta aplikazioetarako fitxategi\n"
+"espezifikoak instalatuko dira. Adibidez, zure ordenagailuan Espainiako\n"
+"erabiltzaileei ostatu eman behar badiezu, zuhaitz-ikuspegian hautatu\n"
+"euskara hizkuntza nagusi gisa, eta Aurreratua atalean, egin klik\n"
+"\"Spanish|Spain\"ri dagokion laukian.\n"
+"\n"
+"Kontuan hartu hizkuntza bat baino gehiago instala daitezkeela. Hizkuntza\n"
+"gehigarriak aukeratutakoan, egin klik \"Ados\" botoian jarraitzeko."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Aldatu CDROMa"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Mandrake Linux bertsio honek ez du %s onartzen."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Aldaketa egin da, baina, eragina izan dezan, saioa amaitu behar duzu"
+msgid "DHCP client"
+msgstr "DHCP bezeroa"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Gorde honela.."
+msgid "Restoring from file %s failed: %s"
+msgstr "Huts egin du %s fitxategitik leheneratzean: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Mesedez sartu zure posta-e helbidea azpian "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech sagua (seriekoa, C7 mota zaharrekoa)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "abisu-konfigurazioa"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Ziur zaude makina honetan inprimaketa ezarri nahi duzula?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Karga balio hau baino handiagoa bada, abisua jasoko duzu"
+msgid "New devfs device"
+msgstr "devfs gailu berria"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "kargatzeko ezarpenak"
+msgid "ERROR: Cannot spawn %s."
+msgstr "OKERRA: Ezin da %s jaurti."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Abioko estilo-konfigurazioa"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Alerta jasoko duzu hautatutako zerbitzuetakoren bat gelditzen bada"
+msgid "Automatic time synchronization"
+msgstr "Ordu-sinkronizazio automatikoa (NTP erabiliz)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "service setting"
-msgstr "zerbitzuaren ezarpena"
+msgid "Backup files not found at %s."
+msgstr "Babestu %s-n aurkitu ez diren fitxategiak."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd Zerbitzua"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Eskerrik asko Mandrake Linux 9.1 aukeratzeagatik"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin Zerbitzua"
+msgid "Armenian (phonetic)"
+msgstr "armeniarra (fonetikoa)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH Zerbitzaria"
+msgid "Card model:"
+msgstr "Txartela modeloa :"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Samba Server"
-msgstr "Samba Zerbitzaria"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "DHCP bezeroa"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix Posta Zerbitzaria"
+msgid "Start Server"
+msgstr "Abiatu Zerbitzaria"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ftp Server"
-msgstr "Ftp Zerbitzaria"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domeinuko Izen Ebazlea"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "(makina honetan)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Zerbitzaria"
+msgid "Install themes"
+msgstr "Instalatu gaiak"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Ongi etorri posta konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure alerta sistema ezarri ahal izango duzu.\n"
+" eguneraketak 2002 MandrakeSoft Stew Benedict-ek <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Posta alerta konfigurazioa"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Posta alerta"
+msgid "Preparing installation"
+msgstr "Instalazioa prestatzen"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "itxaron, fitxategia analizatzen: %s"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Fitxategiaren edukia"
+msgid "Add User -->"
+msgstr "Gehitu erabiltzailea -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Egutegia"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Aukeratu fitxategia"
+msgid "True Type fonts installation"
+msgstr "True Type letra-tipoen instalazioa"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "bat ez badatoz"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Auto-detektatu bertako sarera zuzenean lotutako inprimagailuak"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "bat badatoz"
+msgid "LAN configuration"
+msgstr "Sare lokalaren konfigurazioa (LAN)"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Ezarpenak"
+msgid "hard disk model"
+msgstr "disko zurrun eredua"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Zure erregistroak ikusteko tresna"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Ezin da LVM bolumen logikoa erabili %s muntatze-punturako"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "bilatu"
+msgid "Get Windows Fonts"
+msgstr "Hartu Windows letra-tipoak"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Mandrake Tools-en azalpenak"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Iraniarra"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Mezuak"
+msgid "Croatia"
+msgstr "Kroazia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Erabiltzailea"
+msgid "Gateway:"
+msgstr "Atebidea:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Gehitu erabiltzailea"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Laguntza/_Honi buruz..."
+msgid "Remote printer name"
+msgstr "Urruneko inprimagailu-izena"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Aukerak/Probatu"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/-"
-msgstr "/Fitxategia/-"
+msgid "Device: "
+msgstr "Gailua: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fitxategia/Gorde _honela"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "License agreement"
+msgstr "Lizentzia-kontratua"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fitxategia/_Gorde"
+msgid "System Options"
+msgstr "Sistemaren Aukerak"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Please enter the directory where backups are stored"
+msgstr "Adierazi zein direktoriotan dauden babeskopiak"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fitxategia/_Ireki"
+msgid "Please choose the desired security level"
+msgstr "Mesedez aukeratu nahi duzun segurtasun-maila"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr ", \\/*%s USB inprimagailua"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fitxategia/_Berria"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Hautatu letra-tipoak onartuko dituzten aplikazioak :"
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "Erakutsi bakarrik hautatutako egunerako"
+msgid "Configure X"
+msgstr "Konfiguratu X"
-#: ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Hirugarren botoia emulatu?"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turkiarra (tradizionala \"F\" eredua)"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Aukeratu sagu-mota."
+msgid "Congratulations!"
+msgstr "Zorionak!"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konektatu"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Use owner id for execution"
+msgstr "Erabili jabearen id exekuziorako"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Deskonektatu"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Down"
+msgstr "Bera"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Raw printer (No driver)"
+msgstr "Inprimagailu gordina (kontrolatzailerik ez)"
+
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
-"ariko da"
+msgid "Install rpm"
+msgstr "Instalatu"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "received"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
+"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, \"%s "
+"<fitxategia>\" komandoa edo inprimatze-tresna grafiko bat erabil dezakezu: "
+"\"xpp <fitxategia>\" edo \"kprinter <fitxategia>\". Tresna grafikoak "
+"inprimagailua hautatzeko eta aukeren ezarpenak erraz aldatzeko erabiltzen "
+"dira.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Time remaining "
+msgstr "Geratzen den denbora "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "UK keyboard"
+msgstr "Erresuma Batuko teklatua"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "sent: "
-msgstr ""
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Fitxategi lokalak"
+msgid "Unmount"
+msgstr "Desmuntatu"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "average"
-msgstr ""
+msgid "Uninstall Fonts"
+msgstr "Desinstalatu letra-tipoak"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "abisu-konfigurazioa"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "German (no dead keys)"
+msgstr "Alemana (letra zaharkiturik ez)"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Konexioaren abiadura"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
+msgstr "%s transferitzen..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mila kolore (15 bit)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "NFS edo Samba erabiliz esporta dezakezu. Zein nahi duzu"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Konektatu Internetekin"
+msgid "Reboot"
+msgstr "Root"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Konektatu Internetekin"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konexioa probatzen..."
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Mandrake Control Center"
+msgstr "Mandrake-ren Kontrol Zentroa"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Logs"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
+"Beste portu batzu sartu ditzakezu.\n"
+"Adibide onargarriak dira: 139/tcp 139/udp.\n"
+"Begiratu /etc/services informazioa jasotzeko."
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Konexio-mota: "
-
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Fitxategiak bidaltzen..."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Tape \n"
+msgstr "\t-Tape \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Statistics"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profila: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Sare-konfigurazioa"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remember this password"
+msgstr "Gogoratu pasahitza"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Inprimagailu erabilgarriak"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Interneteko konexioa konpartitzea gaituta dago orain."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "\t-Network by SSH.\n"
+msgstr "\tSSH bidezko sarea.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
+" Nahi zenuen inprimagailua auto-detektatu bada, hautatu ezazu zerrendatik "
+"eta gehitu erabiltzaile-izena, pasahitza, eta/edo lantaldea beharrezko bada."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Hautatu eskaner bat"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Erabili Windows-en partizioko leku librea"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Idatzi ostalariaren izena edo IPa."
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s aurkitu da %s-n, konfiguratu?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Inprimagailu erabilgarriak"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(makina honetan)"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 kontrolatzailea: %s\n"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Kendu hautatutakoak"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s detektatua"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup-en berri-ematea \n"
+"\n"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Gehitu erabiltzailea"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Aukeratu instalatu nahi dituzun paketeak"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
+msgid "Papua New Guinea"
+msgstr "Papua Ginea Berria"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Erabili leku librea"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Serbiarra (zirilikoa)"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(makina honetan)"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
+msgstr "Egin kernel mezua isila jatorrian"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
+"Inprimagailu hau (\"%s\")\n"
+"lehenetsi nahi duzu?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "The DHCP end range"
+msgstr "DHCP-ren eremu amaiera"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Abioko disketea sortzen"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Fitxategi-konpartitzea"
+msgid "Wait please, testing your connection..."
+msgstr "Konexioa probatzen..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "Sarea ixten"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
+msgid "Login ID"
+msgstr "Saio-hasierako ID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak \n"
+"konpartitzeko. Zerbitzu honek NFS fitxategi-blokeatzearen funtzionalitatea\n"
+"eskaintzen du."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP bezeroa"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Inprimagailu erabilgarriak"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr "itxi"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Inprimagailu erabilgarriak"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "\"%s\": inprimatzen/eskaneatzen"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Fitxategi-konpartitzea"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit raid modules"
+msgstr "jaramonik ez raid moduluei"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add a scanner manually"
-msgstr "Hautatu erabiltzailea eskuz"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd inprimaketako daemon-a da. Beharrezkoa da lpr-k ondo funtziona\n"
+"dezan. Inprimatze-lanak inprimagailu(eta)ra esleitzen dituen zerbitzaria da."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Inprimagailu erabilgarriak"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "Interneteko konexioaren konfigurazioa"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Ez dira inprimagailurik aurkitu zure makinara zuzenean lotuta"
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "comma separated numbers"
+msgstr "komaz banaturiko zenbakiak"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Igo hautatutako araua maila bat"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
@@ -18530,359 +18608,318 @@ msgstr ""
"\n"
"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "\"%s\" inprimagailua kendu nahi duzu?"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr "Ezin dut instalatzeko lekurik aurkitu"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Default printer"
+msgstr "Inprimagailu lehenetsia"
+
+#: ../../network/netconnect.pm:1
+#, c-format
msgid ""
-"The following scanners\n"
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
"\n"
-"%s\n"
-"are available on your system.\n"
msgstr ""
+"Internetera konektatzeko modu bat baino gehiago konfiguratu duzu.\n"
+"Aukeratu erabili nahi duzuna.\n"
"\n"
-"Inprimagailu ezezagun bat dago zure sistemara zuzenean lotuta"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Zure %s eskanerra konfiguratu da.\n"
-"Dokumentuak eskaneatu ditzakezu orain aplikazio menuan Multimedia/Grafikoak "
-"barruan \"XSane\" erabiliz."
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "choose device"
-msgstr "Aukeratu gailua"
+msgid "Modify RAID"
+msgstr "Aldatu RAID"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Please select the device where your %s is attached"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Scannerdrake-k ezin izan du zure %s eskanerra detektatu.\n"
-"Mesedez aukeratu zure eskanerra konektatuta dagoen gailua"
+"ISDN PCI txartel bat detektatu dut, baina ez dakit zein motatakoa den. "
+"Hautatu PCI txartel bat hurrengo pantailan."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Inprimagailu erabilgarriak"
+#: ../../any.pm:1
+#, c-format
+msgid "Add user"
+msgstr "Gehitu erabiltzailea"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto-detektatuta"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "%s RAID-diskoak\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakgw:1
+#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-"%s eskaner hau printerdrake-rekin konfiguratu behar da.\n"
-"Mandrake Kontrol Zentroko Hardwarearen ataletik abiaraz dezakezu "
-"printerdrake."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "%s eskaner hori ez da onartzen"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Mandrake Linux bertsio honek ez du %s onartzen."
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose your keyboard"
+msgstr "Aukeratu teklatua"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Mandrake Linux bertsio honek ez du %s onartzen."
+msgid "Format partitions"
+msgstr "Eman formatua partizioei"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Ataka"
+msgid "Automatic correction of CUPS configuration"
+msgstr "CUPS konfigurazio automatikoa"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", "
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Detektatutako eredua: %s %s"
+msgid "Running \"%s\" ..."
+msgstr "\"%s\" exekutatzen ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " ("
-msgstr ""
+msgid "enable radio support"
+msgstr "irrati euskarria gaitu"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Hautatu eskaner bat"
+msgid "Scanner sharing to hosts: "
+msgstr "Fitxategi-konpartitzea"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s ez dago eskaner datubasean, eskuz konfiguratu?"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s aurkitu da %s-n, konfiguratu?"
+msgid "Loopback file name: %s"
+msgstr "Atzera-begiztako fitxategi-izena: %s"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Detekzio martxan"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr "Zenbait gailu gehitu dira:\n"
+msgid "Do not transfer printers"
+msgstr "Ez transferitu inprimagailuak"
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Zenbait gailu \"%s\" hardware motan ezabatu egin dira:\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Imajina lehenetsia abiarazi arteko atzerapena"
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"MandrakeSoft-en arrakastaren funtsa software librearen printzipioa da. Zure "
-"sistema eragile berria mundu osoko Linux komunitatearen elkarlanaren emaitza "
-"da"
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Ongi etorri iturburu irekiaren mundura"
+" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
+" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
+" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
+" baldintzak betez gero.\n"
+"\n"
+" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
+" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
+" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
+" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
+"\n"
+" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
+" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Eskerrik asko Mandrake Linux 9.1 aukeratzeagatik"
+msgid "Please check for multisession CD"
+msgstr "Mesedez markatu saio-anitzeko CDa egiteko"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Zure jakinduria elkarbanatzeko eta Linux tresnak eraikitzen laguntzeko, egin "
-"zaitez gure \"Komunitate\" web-orrian aurkituko dituzun eztabaida-taldeen "
-"partaide"
+msgid "user"
+msgstr "Erabiltzailea"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Iturburu Irekiaren Komunitateari buruz gehiago jakin nahi? Sar zaitez "
-"software librearen munduan!"
+msgid "Use Hard Disk to backup"
+msgstr "Erabili disko gogorra babeskopia egiteko"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Configure"
+msgstr "Konfiguratu"
-#: ../../share/advertising/03-software.pl:1
-#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1k audio fitxategiak jotzeko, zure argazkiak editatu eta "
-"manipulatzeko, eta bideoak ikusteko software berriena erabiltzeko aukera "
-"ematen dizu"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Hautatu eskaner bat"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
+"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
+"ariko da"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Backup Users"
+msgstr "Erabiltzaileen babeskopia"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandrake Terminal Zerbitzariaren Ezarpena"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1k erabat aldatu daitezkeen 11 erabiltzaile interfaze "
-"eskaintzen dizkizu: KDE 3, Gnome 2, WindowMaker, ..."
-
-#: ../../share/advertising/05-desktop.pl:1
-#, c-format
-msgid "A customizable environment"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Sartu zure ostalari-izena.\n"
+"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
+"esate baterako, ``mybox.mylab.myco.com''.\n"
+"Atebidearen IP helbidea ere sar dezakezu, baldin baduzu"
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Hautatu inprimagailuaren spooler-a"
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 garapen plataforma berriena da"
+msgid "Create new theme"
+msgstr "Gai berria sortu"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Bihur ezazu zure makina zerbitzari ahaltsu, saguaren klik gutxi batzuk "
-"eginez: Web zerbitzaria, posta, suhesia, routerra, fitxategi eta inprimaketa "
-"zerbitzaria, ..."
+msgid "Mandrake Tools Explanation"
+msgstr "Mandrake Tools-en azalpenak"
-#: ../../share/advertising/07-server.pl:1
-#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Bihurtu zure makina zerbitzari fidagarria"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Ez da inprimagairik aurkitu!"
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Gure Linux soluzioen aukera osoa, eta baita produktu eta beste \"gutizia\" "
-"batzutan eskaintza bereziak eskuragarri daude lerroan gure e-dendan:"
-
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "MandrakeSoft denda ofiziala"
+"Pakete garrantzitsu batzuk ez dira behar bezala instalatu.\n"
+"Zure CDROM unitateak edo CDROMak akatsak ditu.\n"
+"Probatu CDROMa ordenagailu instalatu batean \"rpm -qpl Mandrake/RPMS/*.rpm\" "
+"erabiliz.\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
-"MandrakeSoftek, Mandrake Linuxentzako soluzio bateragarri profesionalak "
-"eskaintzen dituzten konpainien artean aukeratutako batzuekin lanegiten du. "
-"MandrakeStoren aipatutako kide horien zerrenda eskuratu daiteke."
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "Detektatutako eredua: %s %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimizatu zure segurtasuna"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Produktu hau MandrakeStore webgunean eskuragarri dago"
+msgid "Azerbaijan"
+msgstr "Azerbaijan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "Zintarik ez %s-n!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (AEB)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
-"Batu MandrakeSoft Euskarri taldeetara eta Linuxen Lerroko Komunitateetara "
-"zure jakinduria elkarbanatu eta besteei lagundu lerroko euskarri teknikoko "
-"webguneetan Aditu ezaguna bilakatuz:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "hau da gailua lotzen den bus fisikoa (adib: PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Aurkitu zure arazoei erantzuna MandrakeSoft-en lerroko euskarri "
-"plataformaren bitartez"
+msgid "How is the printer connected?"
+msgstr "Nola dago konektatuta inprimagailua?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Bilakatu zaitez MandrakeExpert"
+msgid "Security level"
+msgstr "Segurtasun-maila"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Gertaera guztiek MandrakeSoften Aditu tekniko kualifikatu bakarraren "
-"jarraipena izango dute."
+msgid "final resolution"
+msgstr "azken erresoluzioa"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Konpainien euskarri behar espezifikoei erantzuteko lerroko plataforma"
+msgid "Services"
+msgstr "Zerbitzuak"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Korporatiboa"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -18897,10 +18934,6 @@ msgstr ""
"orriak (kspread, gnumeric), pdf ikustaileak, etab."
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Lan-estazioa"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Joko-estazioa"
@@ -18973,10 +19006,6 @@ msgstr ""
"KDE, K Desktop Environment, hainbat tresna duen oinarrizko ingurune grafikoa."
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ingurune grafikoa"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-ren lan-estazioa"
@@ -18997,10 +19026,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etab."
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Garapena"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C eta C++ garapen-liburutegiak, programak eta fitxategiak"
@@ -19072,40 +19097,104 @@ msgstr "NFS zerbitzaria, SMB zerbitzaria, Proxy zerbitzaria, ssh zerbitzaria"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multimediako estazioa"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Posta eta berriak irakurtzeko eta bidaltzeko (pine, mutt, tin..) eta web-a "
+"arakatzeko tresnak"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Interneteko konexioa eta konfigurazioa"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Konfiguratu konexioa"
+
+#~ msgid "Disconnect"
+#~ msgstr "Deskonektatu"
+
+#~ msgid "Connect"
+#~ msgstr "Konektatu"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Konexioa birkonfigura dezakezu."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Internetekin konekta zaitezke, edo konexioa birkonfiguratu."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Orain ez zaude Internetekin konektatuta."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Deskonektatu egin zaitezke edo konexioa birkonfiguratu."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Orain Internetekin konektatuta zaude."
+
+#~ msgid "files sending by FTP"
+#~ msgstr "fitxategiak FTP bidez bidaltzen"
+
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Erabili babeskopia inkrementala (ez ordeztu kopia zaharrak)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Berriro jaurti 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr ""
+#~ "Eraiki RAMdiskoa (initrd) honekin 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Idatzi %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopiatu %s %s-ra"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Babestu %s %s.old bezala"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf letra-tipoen bihurketa"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "Letra-tipoen bihurketa"
+
+#~ msgid "Author:"
+#~ msgstr "Egilea:"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
+#~ msgid "Audio station"
+#~ msgstr "Multimediako estazioa"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Joko-estazioa"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
+#~ msgid "Video station"
+#~ msgstr "Joko-estazioa"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Joko-estazioa"
+#~ msgid "Video playing programs"
+#~ msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "The Gimp bezalako programa grafikoak"
+#~ msgid "Graphic station"
+#~ msgstr "Joko-estazioa"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Posta eta berriak irakurtzeko eta bidaltzeko (pine, mutt, tin..) eta web-a "
-"arakatzeko tresnak"
+#~ msgid "Graphics programs"
+#~ msgstr "The Gimp bezalako programa grafikoak"
#, fuzzy
#~ msgid "Printer sharing"
@@ -19326,12 +19415,10 @@ msgstr ""
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19663,9 +19750,6 @@ msgstr ""
#~ "Edo LILO erabiltzen duzu eta ez du funtzionatuko, edo ez duzu LILO "
#~ "erabiltzen eta ez duzu /boot erabili beharrik"
-#~ msgid "Upgrade"
-#~ msgstr "Bertsio-berritu"
-
#~ msgid "Do you want to configure another printer?"
#~ msgstr "Beste inprimagailu bat konfiguratu nahi duzu?"
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
index 7a6e55a53..500049e6a 100644
--- a/perl-install/share/po/fi.po
+++ b/perl-install/share/po/fi.po
@@ -3,16 +3,16 @@
# Copyright (C) 2002,2003 Free Software Foundation, Inc.
# Copyright (C) 2002 Mandrakesoft
# Matias Griese <mahagr@utu.fi>, 2001.
-# Thomas Backlund <thomas.backlund@inritel.com>, 2002,2003
+# Thomas Backlund <thomas@inritel.com>, 2002.
# Taisto Kuikka <taisto@aerith.ronin.jyu.fi>, 2003
# Thomas Backlund <tmb@iki.fi>, 2003
#
#
msgid ""
msgstr ""
-"Project-Id-Version: DrakX-fi - MDK Release 9.1\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-03-13 16:20+0200\n"
+"Project-Id-Version: DrakX-fi - MDK Release 9.2\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-05-15 00:40+0300\n"
"Last-Translator: Thomas Backlund <tmb@iki.fi>\n"
"Language-Team: Finnish <cooker-i18n@linux-mandrake.com>\n"
"MIME-Version: 1.0\n"
@@ -20,3552 +20,684 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"K盲ytt盲j盲kohtainen jako k盲ytt盲盲 ryhm盲盲 \"fileshare\".\n"
-"Voit k盲ytt盲盲 userdrakea lis盲t盲ksesi k盲ytt盲ji盲 t盲h盲n ryhm盲盲n."
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr "K盲ynnist盲 userdrake"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Haluatko sallia k盲ytt盲jien jakaa joitakin omia hakemistoja?\n"
-"Sallimalla t盲m盲n k盲ytt盲jien tarvitsee vain painaa \"Jakaa\"\n"
-"konquerorissa tai nautiluksessa\n"
-"\n"
-"\"Mukautettu\" sallii k盲ytt盲j盲kohtaiset oikeudet.\n"
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pakollinen paketti %s puuttuu"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Voit jakaa sek盲 NFS:ll盲 ett盲 Samballa. Valitse kumpaa haluat k盲ytt盲盲."
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paketti %s pit盲盲 asentaa. Haluatko asentaa sen?"
-
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "Mukautettu"
-
-# Asennuksen sivuvalikko
-#: ../../any.pm:1
-#, c-format
-msgid "Allow all users"
-msgstr "Salli kaikille k盲ytt盲jille"
-
-#: ../../any.pm:1
-#, c-format
-msgid "No sharing"
-msgstr "Ei jaettu"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Lis盲盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "T盲ss盲 on koko lista k盲ytett盲viss盲 olevista maista"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose your country."
-msgstr "Valitse maa jossa asut."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reunion"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Country"
-msgstr "Maa"
-
-# Asennuksen sivuvalikko
-#: ../../any.pm:1
-#, c-format
-msgid "All languages"
-msgstr "Kaikki kielet"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Use Unicode by default"
-msgstr "K盲yt盲 Unicodea oletuksena"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandrake Linux tukee useaa kielt盲. Valitse kielet jotka\n"
-"haluat asentaa. Ne ovat k盲ytett盲viss盲 asennuksen j盲lkeen\n"
-"kun olet k盲ynnist盲nyt koneesi uudelleen."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Valitse k盲ytett盲v盲 kieli."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Valitse k盲ytett盲v盲 ikkunointij盲rjestelm盲:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "Valitse oletusk盲ytt盲j盲:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Haluatko k盲ytt盲盲 t盲t盲 ominaisuutta?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Yksi k盲ytt盲j盲 voidaan asettaa kirjautumaan sis盲盲n automaattisesti "
-"tietokoneellesi."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Automaattinen kirjautuminen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Kuvake"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Komentotulkki"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Salasana (uudelleen)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Salasana"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "K盲ytt盲j盲tunnus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Real name"
-msgstr "Oikea nimi"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Accept user"
-msgstr "Hyv盲ksy k盲ytt盲j盲"
-
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Done"
-msgstr "Valmis"
+msgid "Scanning partitions to find mount points"
+msgstr "Tarkistan osioita l枚yt盲盲kseni liitospisteet"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-"Lis盲盲 k盲ytt盲j盲\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Lis盲盲 k盲ytt盲j盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "K盲ytt盲j盲tunnus on jo lis盲tty"
+"jos asetettu, tarkistetaan 'suid root' tiedostojen lis盲ykset/poistamiset."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The user name is too long"
-msgstr "K盲ytt盲j盲nimi on liian pitk盲"
+msgid "\t\tErase=%s"
+msgstr "\t\tPoista=%s"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"K盲ytt盲j盲tunnus saa sis盲lt盲盲 vain pieni盲 kirjaimia, numeroita, `-' ja `_'"
+msgid "network printer port"
+msgstr "verkkotulostimen portti"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Please give a user name"
-msgstr "Anna k盲ytt盲j盲tunnus"
+msgid "Please insert floppy disk:"
+msgstr "Aseta levyke asemaan:"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Salasana on liian yksinkertainen"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Yrit盲 uudelleen"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Salasanat poikkeavat toisistaan"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(lis盲tty jo: %s)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr "oikeudet ohjelmointi-ty枚kaluihin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr "oikeudet verkko-ty枚kaluihin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr "oikeudet yll盲pidollisiin tiedostoihin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr "salli \"su\""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to rpm tools"
-msgstr "oikeudet rpm-ty枚kaluihin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
-msgstr "oikeudet X-ohjelmille"
-
-#: ../../any.pm:1
-#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"T盲ss盲 ovat t盲m盲nhetkiset k盲ynnistysvalikon tietueet.\n"
-"Voit lis盲t盲 uusia tai muuttaa olemassaolevia."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Muu k盲ytt枚j盲rjestelm盲 (Windows...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Muu k盲ytt枚j盲rjestelm盲 (MacOS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Muu k盲ytt枚j盲rjestelm盲 (SunOS...)"
+"Osiotaulun varmuuskopio ei ole saman kokoinen\n"
+"Jatka silti?"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Which username"
+msgstr "Mik盲 k盲ytt盲j盲tunnus"
#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Mink盲 tyyppisen tietueen haluat lis盲t盲?"
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "Nimike on jo k盲yt枚ss盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Sinun t盲ytyy m盲盲ritell盲 juuriosio"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Sinun t盲ytyy m盲盲ritell盲 ydin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Tyhj盲盲 nimikett盲 ei sallita"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Oletus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "Ei n盲ytt枚盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd:n koko"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Lis盲盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Nimike"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "Turvaton"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "Taulukko"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "Juuri"
-
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Luku-kirjoitus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "N盲ytt枚tila"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "Kuva"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Oletusk盲ytt枚j盲rjestelm盲?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Mahdollista OF-k盲ynnistys?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Mahdollista CD-k盲ynnistys?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ytimen k盲ynnistysviive"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Vapaa Firmware -viive"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "K盲ynnistyslaite"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "K盲ynnistysviesti"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "K盲ytett盲v盲 j盲rjestelm盲lataaja"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "K盲ytt枚j盲rjestelm盲n lataajan p盲盲asetukset"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Asetus ``Rajoita komentorivioptioita'' ei ole hy枚dyllinen ilman salasanaa"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Anna muistin koko megatavuina (Mt)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "K盲yt盲 useaa profiilia"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tarkka muistin koko, jos tarpeen (l枚ydettiin %d Mt)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Tyhjenn盲 /tmp jokaisella k盲ynnistyskerralla"
-
-# Asennuksen sivuvalikko
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Luo k盲ynnistyslevyke"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "rajoita"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Rajoita komentorivioptioita"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
-msgstr "Pakota No APIC"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable ACPI"
-msgstr "Ota ACPI k盲ytt枚枚n"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Viive ennen oletusj盲rjestelm盲n k盲ynnistyst盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "tiivis"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Tiivis"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "K盲ytt枚j盲rjestelm盲n lataajan asennus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "Ensimm盲inen sektori k盲ynnistysosiolla"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Levyn ensimm盲inen sektori (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Minne haluat asentaa k盲ytt枚j盲rjestelm盲n lataajan?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub asennus"
-
-#: ../../any.pm:1
-#, c-format
-msgid "SILO Installation"
-msgstr "SILOn asennus"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Skip"
-msgstr "Ohita"
-
-#: ../../any.pm:1
-#, c-format
-msgid "On Floppy"
-msgstr "Levykkeell盲"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Ensimm盲inen sektori juuriosiolla"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"P盲盲tit asentaa k盲ynnistyslataajan osioon.\n"
-"T盲m盲 viittaa siihen ett盲 sinulla on jo k盲ynnistyslataaja\n"
-"k盲ynnistys-kovalevyll盲si (esim. System Commander).\n"
-"\n"
-"Mik盲 on sinun k盲ynnistys-kovalevy?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Luon k盲ynnistyslevykett盲..."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Aseta levyke asemaan %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Valitse levykeasema jolla luot k盲ynnistyslevykkeen"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Toinen levykeasema"
+msgid "Restore partition table"
+msgstr "Palauta osiotaulu"
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Ensimm盲inen levykeasema"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS-palvelimella \"%s\""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Valitan, levykeasemaa ei l枚ydy"
+msgid "Post-install configuration"
+msgstr "Asennuksen j盲lkeiset toiminnot"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mukautetulla k盲ynnistyslevykkeell盲 voit k盲ynnist盲盲 j盲rjestelm盲n ilman\n"
-"tavanomaisen k盲ytt枚j盲rjestelm盲lataajan apua. T盲st盲 on hy枚ty盲, jos et halua\n"
-"asentaa LILOa (tai grubia) j盲rjestelm盲盲si, toinen k盲ytt枚j盲rjestelm盲 poistaa\n"
-"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua k盲ynnistyslevykett盲 "
-"voidaan\n"
-"k盲ytt盲盲 my枚s Mandraken pelastuskuvan kanssa, jolloin vakavista\n"
-"j盲rjestelm盲n virhetilanteista on helpompi toipua.\n"
-"Haluatko luoda k盲ynnistyslevykkeen j盲rjestelm盲盲si?\n"
-"%s"
+msgid "Use ``%s'' instead"
+msgstr "K盲yt盲 sen sijaan ``%s'':盲盲"
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(VAROITUS! k盲yt盲t XFS:盲 juuriosiollesi,\n"
-"k盲ynnistyslevykkeen luominen 1.44 Mt levykkeelle\n"
-"todenn盲k枚isesti ep盲onnistuu, koska XFS tarvitsee\n"
-"eritt盲in kookkaan ajurin)."
+msgid "Type"
+msgstr "Tyyppi"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Mukautetulla k盲ynnistyslevykkeell盲 voit k盲ynnist盲盲 j盲rjestelm盲n ilman\n"
-"tavanomaisen k盲ytt枚j盲rjestelm盲lataajan apua. T盲st盲 on hy枚ty盲, jos et halua\n"
-"asentaa SILOa j盲rjestelm盲盲si, toinen k盲ytt枚j盲rjestelm盲 poistaa SILOn,\n"
-"tai SILO ei toimi laitteistossasi. Mukautettua k盲ynnistyslevykett盲 voidaan\n"
-"k盲ytt盲盲 my枚s Mandraken pelastus-kuvan kanssa, jolloin vakavista\n"
-"j盲rjestelm盲n virhetilanteista on helpompi toipua.\n"
"\n"
-"Jos haluat luoda k盲ynnistyslevykkeen j盲rjestelm盲盲si, aseta levyke\n"
-"ensimm盲iseen asemaan ja paina \"Ok\"."
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Et voi asentaa k盲ytt枚j盲rjestelm盲n lataajaa osiolle %s\n"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "ei tarpeeksi tilaa hakemistossa /boot"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Korostettu tietue k~^Dynnistet~^D~^Dn automaattisesti %d sekunnissa."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "muokataksesi komennot ennen k~^Dynnistyst~^D, tai 'c' komentoriville."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Paina enter k~^Dynnist~^D~^Dksesi valitun k~^Dytt~^Tj~^Drjestelm~^Dn, 'e'"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "K~^Dyt~^D %c- ja %c-n~^Dpp~^Dimi~^D valitaksesi korostetun tietueen"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tervetuloa GRUB k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO tekstipohjaisella valikolla"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO graafisella valikolla"
+"My枚sk盲盲n tulostimia, jotka ovat asetettuja valmistajien tuottamilla PPD-"
+"tiedostoilla tai natiivi CUPS-ajureilla, ei voida siirt盲盲."
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"The following printer\n"
"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Tervetuloa %s k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!\n"
-"\n"
-"Valitse k~^Dytt~^Tj~^Drjestelm~^D yll~^D olevasta listasta tai\n"
-"odota %d sekuntia oletusk~^Dynnistyst~^D.\n"
+"Seuraavat tulostimet:\n"
"\n"
+"%s%s\n"
+"on kytketty suoraan koneeseesi"
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper puuttuu"
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu puuttuu"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Kuvankaappaukset l枚ytyv盲t asennuksen j盲lkeen hakemistosta %s"
-
-#: ../../common.pm:1
-#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Kuvankaappauksia ei voi tehd盲 ennen osiointia"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekuntia"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minuutti"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuuttia"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "Tt"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "Gt"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "Mt"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "kt"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "Yhdysvallat"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Austria"
-msgstr "It盲valta"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Alankomaat"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Sweden"
-msgstr "Ruotsi"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Norway"
-msgstr "Norja"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Greece"
-msgstr "Kreikka"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Czech Republic"
-msgstr "Tsekin tasavalta"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Ranska"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Virhe kirjoitettaessa %2s tiedostoon %1s."
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Nothing to do"
-msgstr "Ei mit盲盲n tekemist盲"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Vapaa tila ei riit盲 automaattiseen varaukseen"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Et voi k盲ytt盲盲 salattua tiedostoj盲rjestelm盲盲 liitospisteelle %s"
-
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Tarvitset oikean tiedostoj盲rjestelm盲n (ext2/ext3, reiserfs, xfs tai jfs) "
-"t盲lle liitospisteelle.\n"
+msgid "Central African Republic"
+msgstr "Keski-Afrikan tasavalta"
-#: ../../fsedit.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "T盲m盲n hakemiston pit盲isi olla juuritiedostoj盲rjestelm盲ss盲"
+msgid "Gateway device"
+msgstr "Yhdysk盲yt盲v盲n laite"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Et voi k盲ytt盲盲 LVM loogista taltiota liitepisteelle %s"
+msgid "Net Method:"
+msgstr "Verkko tapa:"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
-"Mik盲盲n k盲ynnistyslataaja ei osaa k盲sitell盲 t盲t盲 ilman /boot -osiota.\n"
-"Lis盲盲 /boot -osio, jos haluat k盲ytt盲盲 liloa tai grubia"
+msgid "Ethernetcard"
+msgstr "Verkkokortti"
-# mat
-#: ../../fsedit.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "On jo olemassa osio, jonka liitospiste on %s\n"
+msgid "Parameters"
+msgstr "Parametrit"
-#: ../../fsedit.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Liitospisteet saavat sis盲lt盲盲 vain kirjaimia ja numeroita"
+msgid "Auto-detect"
+msgstr "Automaattinen tunnistaminen"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Liitospisteiden pit盲盲 alkaa /-merkill盲."
+msgid "Interface:"
+msgstr "Liit盲nt盲:"
-#: ../../fsedit.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Et voi k盲ytt盲盲 ReiserFS:盲盲 alle 32 Mt osioilla"
+msgid "Select installation class"
+msgstr "Asennuksen luokka"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Et voi k盲ytt盲盲 JFS:盲盲 alle 16 Mt osioilla"
+msgid "on CDROM"
+msgstr "CD-levylle"
-#: ../../fsedit.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-"En voi lukea laitteen %s osiotaulukkoa. Se on liian korruptoitunut :(.\n"
-"Voin yritt盲盲 jatkaa poistamalla kaikki virheelliset osiot (KAIKKI TIEDOT\n"
-"tuhotaan). Toinen vaihtoehto on, ettei sallita DrakX:盲盲 muokata "
-"osiotaulukkoa.\n"
-"(virhe: %s)\n"
-"\n"
-"Hyv盲ksytk枚 ett盲 kaikki virhelliset osiot poistetaan?\n"
-
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "Virhe"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "palvelin"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "with /usr"
-msgstr "erillinen '/usr' osio"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "yksinkertainen"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Otetaan k盲ytt枚枚n sivutusosiota %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "virhe irroitettaessa %s: %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "osion %s liitt盲minen hakemistoon %s ep盲onnistui"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Liitet盲盲n osiota %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Checking %s"
-msgstr "Tarkistetaan %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Alustan osiota %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Luon ja alustan tiedostoa %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "en osaa alustaa %s:盲盲 tyyppi盲 %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s:n alustus %s:ta ep盲onnistui"
+"J盲rjestelm盲 ei n盲yt盲 olevan yhdistynyt Internetiin.\n"
+"Kokeile muuttaa Internet-asetuksia."
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-"Paina \"Seuraava ->\", jos haluat tuhota kaiken t盲ll盲 kiintolevyll盲 olevan\n"
-"tiedon sek盲 osiot. Ole varovainen, sill盲 painettuasi \"Seuraava ->\" et voi\n"
-"en盲盲 palauttaa mit盲盲n t盲ll盲 kiintolevyll盲 olleita tietoja ja osioita, \n"
-"mukaanlukien kaikki Windows-tiedostot.\n"
+"Yhdist盲 tulostimesi Linux-palvelimeen ja salli Windows kone(et) yhdist盲盲 "
+"siihen asiakkaina.\n"
"\n"
-"Paina \"<- Edellinen\" keskeytt盲盲ksesi t盲m盲n toiminnon ilman ett盲 menet盲t\n"
-"mit盲盲n kiintolevyll盲 ollutta tietoa ja osioita."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valitse kiintolevy, jonka haluat tyhjent盲盲 uudelle Mandrake Linux -osiolle.\n"
-"Ole varovainen, koska kaikki asemalla oleva tieto tuhoutuu eik盲 ole en盲盲\n"
-"palautettavissa!"
+"Haluatko varmasti jatkaa asettamalla tulostinta t盲ll盲 tavalla?"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-"T盲ss盲 DrakX n盲ytt盲盲 yhteenvedon laitteistoasi koskevista tiedoista\n"
-"jotka se on ker盲nnyt. Asennetusta laitteistosta riippuen, n盲et joitakin\n"
-"tai kaikki seuraavista tietueista. Jokainen tietue koostuu asetettavasta\n"
-"laitteesta ja lyhyest盲 selostuksesta laitteen astuksien nykytilasta. Paina\n"
-"sit盲 vastaava \"M盲盲rittele\" painiketta jos haluat muuttaa sit盲.\n"
-"\n"
-" * \"N盲pp盲imist枚\": tarkista n盲pp盲inasettelu, ja paina \"M盲盲rittele\"\n"
-"jos on tarvetta muuttaa sit盲;\n"
-"\n"
-" * \"Maa\": takista maa-asetukset. jos et ole maassa, joka on valittu, \n"
-"paina \"M盲盲rittele\" painiketta ja valitse joku muu. Jos maasi ei ole\n"
-"listassa, paina \"Lis盲盲\" painiketta jolloin n盲et listan kaikista maista.\n"
-" * \"Aikavy枚hyke\": DrakX oletuksena arvioi aikavy枚hykkeesi riippuen siit盲,\n"
-"mink盲 kielen olet valinnut. Jos t盲m盲 ei ole oikea, voit muuttaa sit盲\n"
-"painamalla \"M盲盲rittele\". T盲ss盲 voit my枚s asettaa jos j盲rjestelm盲si\n"
-"kello on asetettu GMT-aikaan ja jos haluat automaattisen kellon \n"
-"synkronointi ulkoisen aikapalvelimen kanssa.\n"
-"\n"
-" * \"Hiiri\": tarkista nykyinen hiiriasetus, ja paina \"M盲盲rittele\" jos on\n"
-"tarvetta muuttaa sit盲.\n"
-"\n"
-" * \"Tulostin\": painamalla \"M盲盲rittele\"-painiketta avaat tulostuksen\n"
-"asetusvelhon. Lue lis盲盲 asiaa koskevasta luvusta ``Aloitusoppaasta''\n"
-"saadaaksesi lis盲盲tietoa miten asettaa uusi tulostin. K盲ytt枚liittym盲\n"
-"joka esitet盲盲n siell盲 on vastaava kuin se jota k盲ytet盲盲n asennuksen\n"
-"aikana.\n"
-"\n"
-" * \"脛盲nikortti\": jos 盲盲nikortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
-"n盲ytet盲盲n t盲盲ll盲. Jos huomaat ett盲 n盲ytetty 盲盲nikortti ei vastaa sit盲\n"
-"joka on asennettu koneeseesi, voit painaa \"M盲盲rittele\" ja valita toisen\n"
-"ajurin.\n"
-"\n"
-" * \"Graafinen k盲ytt枚liittym盲\": oletuksena DrakX asettaa graafisen\n"
-"k盲ytt枚liittym盲si k盲ytt盲m盲盲n \"800x600\" tai \"1024x768\" n盲ytt枚tilaa.\n"
-"Jos t盲m盲 ei sovi sinulle, paina \"M盲盲rittele\" muuttaaksesi asetukset.\n"
-"\n"
-" * \"TV-kortti\": jos TV-korttisi on tunnistettu j盲rjestelm盲ss盲si, se\n"
-"n盲ytet盲盲n t盲盲ll盲. Jos sinulla on TV-kortti ja sit盲 ei ole tunnistettu,\n"
-"voit painaa \"M盲盲rittele\" ja yritt盲盲 asettaa sen itse.\n"
-"\n"
-" * \"ISDN-kortti\": jos ISDN-kortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
-"n盲ytet盲盲n t盲盲ll盲. Voit painaa \"M盲盲rittele\" jos sinulla on tarvetta \n"
-"muuttaa kortin asetuksia.\n"
-"\n"
-" * \"Verkko\": jos haluat asettaa Internet- tai paikallisverkkoasetuksia\n"
-"nyt, voit painaa \"M盲盲rittele\".\n"
-"\n"
-"\n"
-" * \"Turvataso\": t盲ss盲 voit muuttaa asennuksen alussa asettamasi\n"
-"turvatasoa jos haluat ().\n"
-"\n"
-" * \"Palomuuri\": Jos aiot yhdist盲盲 konettasi Internettiin, kannattaa\n"
-"suojautua verkon vaaroista asettamalla palomuuria. Katso aloitus-\n"
-"oppaasta t盲t盲 aihetta vastaava lukua saadaaksesi lis盲盲tietoa\n"
-"palomuurin asetuksista.\n"
-"\n"
-" * \"K盲ynnistyslataaja\": jos haluat muuttaa k盲ynnistyslataajasi asetuksia,\n"
-"paina \"M盲盲rittele\". T盲t盲 ei kannata muuttaa jos et ole asiantuntija.\n"
-"\n"
-" * \"Palvelut\": t盲盲ll盲 voit m盲盲ritt盲盲 mitk盲 palveluja j盲rjestelm盲ss盲si\n"
-"py枚rii. Jos aiot k盲ytt盲盲 t盲t盲 konetta palvelimena, ehdotamme ett盲\n"
-"tarkistat n盲it盲 asetuksia."
+msgid "Belarus"
+msgstr "Belarus"
-#: ../../help.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"脛盲nikortti\": jos 盲盲nikortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
-"n盲ytet盲盲n t盲盲ll盲. Jos huomaat ett盲 n盲ytetty 盲盲nikortti ei vastaa sit盲\n"
-"joka on asennettu koneeseesi, voit painaa t盲t盲 painiketta ja valita toisen "
-"ajurin."
+msgid "Error writing to file %s"
+msgstr "Virhe kirjoitettaessa tiedostoon %s"
-#: ../../help.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Yaboot on k盲ynnistyslataaja NewWorld MacIntosh laitteistolle. Se osaa\n"
-"k盲ynnist盲盲 GNU/Linux:n, MacOS:n tai MacOSX:n jos ne l枚ytyv盲t koneestasi.\n"
-"Yleens盲 n盲m盲 muut k盲ytt枚j盲rjestelm盲t tunnistetaan oikein ja asetetaan\n"
-"k盲ynnistyslataajan valikkoon. Jos n盲in ei tapahdu, voit t盲ss盲 lis盲t盲 \n"
-"tietueen k盲sin. Varmista ett盲 valitset oikeat parametrit.\n"
-"\n"
-"Yaboot:in p盲盲optiot ovat:\n"
-"\n"
-" * K盲ynnistysviesti: yksinkertainen tekstiviesti joka n盲ytet盲盲n ennen\n"
-"k盲ynnistyskehotetta;\n"
-"\n"
-" * K盲ynnistyslaite: kertoo mihin haluat asentaa GNU/Linux:in k盲ynnistykseen\n"
-"tarvittavat tiedot. Yleisesti, olet jo asettanut bootstrap-osion t盲h盲n\n"
-"tarkoitukseen;\n"
-"\n"
-" * Vapaa Firmware viive: eri tavoin kuin LILO, Yaboot:ille l枚ytyy kaksi\n"
-"viivett盲. Ensimm盲inen viive lasketaan sekunneissa jolloin sinulla on\n"
-"mahdollisuuus valita CD:n, OF k盲ynnistyksen, MacOS:n ja Linuxin v盲lill盲;\n"
-"\n"
-" * Ytimen k盲ynnistysviive: t盲m盲 viive on vastaava kuin LILO:n k盲ynnistys-\n"
-"viive. Valittuasi Linux, sinulla on t盲m盲 viive 0.1 sekunnin kertoimena,\n"
-"ennen kuin oletusytimen k盲ynnistys valitaan;\n"
-"\n"
-" * Mahdollista CD-k盲ynnistys?: merkitsem盲ll盲 t盲m盲 optio sinun sallitaan\n"
-"valita ``C'' valitaksesi CD-k盲ynnistyksen ensimm盲isess盲\n"
-"k盲ynnistyskehotteessa;\n"
-"\n"
-" * Mahdollista OF-k盲ynnistys?: merkitsem盲ll盲 t盲m盲 optio sinun sallitaan\n"
-"valita ``N'' valitaksesi OpenFirmvare-k盲ynnistyksen ensimm盲isess盲\n"
-"k盲ynnistyskehotteessa;\n"
-"\n"
-" * Oletusk盲ytt枚j盲rjestelm盲: voit m盲盲ritt盲盲 mik盲 k盲ytt枚j盲rjestelm盲 \n"
-"k盲ynnistet盲盲n oletuksena kun Vapaan Firmwaren viive t盲yttyy."
+"apmd:ta k盲ytet盲盲n valvomaan paristojen tilaa ja raportoimaan siit盲 syslogin\n"
+"kautta. apmd:t盲 voidaan my枚s k盲ytt盲盲 sulkemaan kone akkujen ollessa tyhji盲."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Voit lis盲t盲 ylim盲盲r盲isi盲 tietueita yaboot:ille, joko toiselle k盲ytt枚-\n"
-"j盲rjestelm盲lle, vaihtoehtoiselle ytimelle, tai h盲t盲tilan k盲ynnistyskuvalle.\n"
-"\n"
-"Toisille k盲ytt枚j盲rjestelmille tietue sis盲lt盲盲 ainoastaan nimikkeen ja\n"
-"\"juuri\"-osion.\n"
-"\n"
-"Linuxille l枚ytyy pari lis盲optiota:\n"
-"\n"
-" * Nimike: t盲m盲 on vain se nimi joka sinun pit盲盲 kirjoittaa yaboot:n\n"
-"kehotteessa valitaksesi t盲m盲n k盲ynnistysvaihtoehdon;\n"
-"\n"
-" * Kuva: t盲m盲 on k盲ynnistett盲v盲n ytimen nimi. Yleens盲 t盲m盲 on vmlinux\n"
-"tai vmlinux eri p盲盲tteill盲;\n"
-"\n"
-" * Juuri: t盲m盲 on\"juuri\"-laite, tai ``/'' Linux-asennuksellesi;\n"
-"\n"
-" * Lis盲盲: Applen laitteistoilla, ytimen lis盲盲-optiota k盲ytet盲盲n monesti "
-"apuna\n"
-"videolaitteiston alustamisessa, tai m盲盲ritt盲m盲盲n Applen vakiohiirist盲\n"
-"yleens盲 puuttuvan toisen ja kolmannen hiirin盲pp盲imen emulointi \n"
-"n盲pp盲imist枚ll盲 emuloiden. T盲ss盲 pari esimerkki盲:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: t盲t盲 optiota voidaan k盲ytt盲盲 alkuvaiheessa tarvittavien "
-"moduulien\n"
-"lataamiseen ennen kuin k盲ynnistyslaite on k盲ytett盲viss盲, tai ladataksesi\n"
-"virtuaalisen levykuvan muistiin h盲t盲tilanteissa.\n"
-"\n"
-" * Initrd:n koko: virtuaalilevyn vakiokoko on yleens盲 4096 tavua. Jos sinun\n"
-"tarvitsee m盲盲ritt盲盲 iso virituaalilevy, voit k盲ytt盲盲 t盲t盲 optiota\n"
-"\n"
-" * Luku-kirjoitus: yleens盲 \"juuri\"-osio liitet盲盲n vain lukutilassa,\n"
-"jotta voidaan suorittaa tiedostoj盲rjestelm盲n tarkistus ennen \n"
-"kuin j盲rjestelm盲 siiryy ``aktiiviseen'' tilaan. T盲ss盲 voit ohittaa \n"
-"oletukset k盲ytt盲m盲ll盲 t盲t盲 optiota;\n"
-"\n"
-" * Ei n盲ytt枚盲: jos Applen n盲yt枚nohjain sattuu olemaan eritt盲in\n"
-"ongelmallinen, voit valita t盲m盲n option k盲ynnist盲盲ksesi ``ei-n盲ytt枚''-\n"
-"tilaan, jossa on sis盲盲nrakennetun kehyspuskurin tuki;\n"
-"\n"
-" * Oletus: valitsee nykyisen tietueen Linuxin oletusvalintana, joka voidaan\n"
-"valita vain painamalle ENTER yaboot:in kehotteessa. T盲m盲 tietue on\n"
-"my枚s merkitty ``*'', jos painat [Tab] n盲hd盲ksesi k盲ynnistysvalinnat."
+msgid "Use tape to backup"
+msgstr "K盲yt盲 nauhaa varmuuskopioinnissa"
-#: ../../help.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Nyt DrakX tunnistaa kaikki IDE-laitteet, jotka on kytketty j盲rjestelm盲盲si.\n"
-"Samalla my枚s tutkitaan l枚ytyyk枚 j盲rjestelm盲st盲 PCI SCSI ohjaimia. Jos \n"
-"SCSI-ohjain l枚ytyy, asentaa DrakX tarvittava(t) ajuri(t).\n"
-"\n"
-"Koska laitteiston tunnistaminen ei ole idiootinvarma, DrakX voi\n"
-"ep盲onnistua. Siinn盲 tapauksessa joudut m盲盲ritt盲m盲盲n laitteistosi\n"
-"itse.\n"
-"\n"
-"Jos sinun pit盲盲 m盲盲ritt盲盲 PCI SCSI ohjaintasi, DrakX kysyy sinulta\n"
-"haluatko m盲盲ritt盲盲 ohjaimen asetuksia. Ehdotamme ett盲 sallit DrakX\n"
-"tunnistaa tarvittavat asetukset laitteiston alustamiseen. Yleens盲 DrakX\n"
-"suorittaa t盲m盲n toiminnon ongelmitta.\n"
-"\n"
-"Jos DrakX ei pystyk盲盲n tunnistamaan tarvittavia asetuksia joilla ohjainta\n"
-"pit盲盲 alustaa, joudut itse sy枚tt盲m盲盲n niit盲 ajurille."
+msgid "The following packages are going to be installed"
+msgstr "Seuraavat paketit asennetaan"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-"Nyt on aika valita tulostusj盲rjestelm盲 tietokoneellesi. Muut k盲ytt枚-\n"
-"j盲rjestelm盲t saattavat tarjota sinulle yhden, mutta Mandrake Linux \n"
-"tarjoaa kaksi. Kukin tulostusj盲rjestelm盲 sopii parhaiten tietylle \n"
-"asetuksille.\n"
-"\n"
-" * \"pdq\" -- joka tarkoittaa ``tulosta, 盲l盲 jonota (print, don't queue)'',\n"
-"T盲m盲 on sopiva valinta jos sinulla on suora yhteys tulostimeesi ja haluat\n"
-"mahdollisuuden 'h盲t盲katkaisuun' jos tulostin on tukossa, eik盲 sinulla\n"
-"on verkkoon liitettyj盲 tulostimia. Se tukee ainoastaan yksinkertaisimpia\n"
-"verkkoasetelmia ja on hidas verkkok盲ytt枚枚n. Valitse \"pdq\" jos t盲m盲 on\n"
-"ensimm盲inen GNU/Linux tuttavuus. \n"
-"\n"
-" * \"CUPS\" -- ``Common Unix Printing System'', eli Yleinen Unix Tulostus-\n"
-"j盲rjestelm盲, on mainio tulostettaessa paikalliseen tulostimeen, tai\n"
-"vaikkapa maapallon toiselle puolelle. Se on yksinkertainen j盲rjestelm盲\n"
-"ja voi toimia tulostuspalvelimena tai asiakkaana vanhalle \"lpd\" \n"
-"tulostusj盲rjestelm盲lle. N盲in ollen, se on yhteensopiva vanhempien\n"
-"j盲rjestelmien kanssa. Se on monitaitoinen, mutta perusasetuksen teko\n"
-"on melkein yht盲 helppoa kuin \"pdq\". Jos tarvitset \"lpd\" palvelimen \n"
-"emulointia, sinun pit盲盲 k盲ynnist盲盲 \"cups-lpd\" demoni. \"CUPS\" \n"
-"sis盲lt盲盲 graafinen k盲ytt枚liittym盲n jota voidaan k盲ytt盲盲 tulostamiseen \n"
-"tai asetuksien tekoon.\n"
-"\n"
-"Jos teet valinnan nyt, ja my枚hemmin huomaat ettet pid盲 nykyistest盲\n"
-"tulostusj盲rjestelm盲st盲 voit muuttaa valintasi Mandraken Ohjauskeskuksesta\n"
-"l枚ytyv盲ss盲 PrinterDrakessa valitsemalla Asiantuntija-painiketta."
+msgid "CUPS configuration"
+msgstr "CUPS asetus"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO (the LInux LOader) ja grub ovat GNU/Linux j盲rjestelm盲lataajia.\n"
-"Yleens盲 t盲m盲 askel on automaattinen, eli DrakX analysoi k盲ynnistyssektorin\n"
-"ja toimii sen mukaan mit盲 sielt盲 l枚ytyy:\n"
-"\n"
-" * jos Windows k盲ynnistyssektori l枚ytyy, sen tilalle asennetaan grub/LILO\n"
-"k盲ynnistyssektori. T盲ll盲 tavalla voit k盲ynnist盲盲 GNU/Linuxin tai jonkin \n"
-"muun k盲ytt枚j盲rjestelm盲n.\n"
-"\n"
-" * jos grub tai LILO k盲ynnistyssektori l枚ytyy, se p盲ivitet盲盲n uudempaan\n"
-"versioon.\n"
-"\n"
-"Jos DrakX ei voi tehd盲 p盲盲t枚st盲, se kysyy sinulta mihin haluat asentaa\n"
-"k盲ynnistyslataajan.\n"
-"\n"
-"\"K盲ynnistyslaite\": yleens盲 sinun ei tarvitse muuttaa oletusta (\"Levyn\n"
-"ensimm盲inen sektori (MBR)\"), mutta jos haluat, voit asentaa k盲ynnistys-\n"
-"lataajan toiselle kovalevylle (\"/dev/hdb\") tai vaikkapa \"Levykkeelle\"."
+msgid "Hong Kong"
+msgstr "Hong Kong"
-#: ../../help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Asetettuasi yleiset k盲ynnistyslataajan parametrit, lista k盲ynnistys-\n"
-"vaihtoehdoista k盲ynnistyksen aikana n盲ytet盲盲n.\n"
-"\n"
-"Jos joku toinen k盲ytt枚j盲rjestelm盲 on asennettu koneessasi, se lis盲t盲盲n\n"
-"automaattisesti k盲ynnistysvalikkoon. Voit hienos盲盲t盲盲 olemassaolevia\n"
-"optioita, painamalla \"Lis盲盲\" luodaksesi uuden tietueen; valitsemalla\n"
-"olemassa olevan tietueen ja painamalla \"Muokkaa\" muokataksesi sen\n"
-"asetuksia; tai \"Poista\" jos haluat poistaa sen. Painamalla \"OK\"\n"
-"tekem盲si muutokset otetaan k盲ytt枚枚n.\n"
-"\n"
-"Jos et halua kenenk盲盲n p盲盲sev盲n osaan k盲ytt枚j盲rjestelmist盲, voit poistaa\n"
-"kyseiset tietueet, jolloin ne poistetaan k盲ynnistysvalikosta. Mutta siin盲\n"
-"tapauksessa tarvitset itse k盲ynnistyslevykett盲 p盲盲st盲ksesi kyseisiin\n"
-"k盲ytt枚j盲rjestelmiin!"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"T盲m盲 dialogi sallii k盲ynnistyslataajan hienos盲盲d枚n:\n"
-"\n"
-" * \"K盲ytett盲v盲 j盲rjestelm盲lataaja\": sinulla on kolme vaihtoehtoa:\n"
-"\n"
-" * \"GRUB\": jos pid盲t grub:ista (tekstipohjainen);\n"
-"\n"
-" * \"LILO tekstipohjaisella valikolla\": jos pid盲t LILO:n teksti-\n"
-"pohjaisesta k盲ytt枚liittym盲st盲.\n"
-"\n"
-" * \"LILO graafisella valikolla\": jos pid盲t LILO:n graafisesta k盲ytt枚-\n"
-"liittym盲st盲;\n"
-"\n"
-" * \"K盲ynnistyslaite\": useimmissa tapauksissa k盲yt盲t oletuslaitetta\n"
-" (\"/dev/hda\"), mutta k盲ynnistyslataaja voidaan my枚s asentaa toiselle "
-"kovalevylle\n"
-" (\"/dev/hdb\"), tai vaikkapa levykkeelle (\"/dev/fd0\");\n"
-"\n"
-" * \"Viive ennen oletusj盲rjestelm盲n k盲ynnistyst盲\": kun (uudelleen)\n"
-"k盲ynnist盲t tietokoneesi, t盲m盲 on viive jonka aikana k盲ytt盲j盲 voi\n"
-"k盲ynnistysvalikosta valita muun kuin oletustietueen.\n"
-"\n"
-"!! Huom! Jos j盲t盲t k盲ynnistyslataajan asentamatta (valitsemalla \"Ohita\"\n"
-"t盲ss盲), sinun pit盲盲 varmistaa, ett盲 sinulla on keino k盲ynnist盲盲 Mandrake\n"
-"Linux -j盲rjestelm盲si! Varmista my枚s, ett盲 tied盲t mit盲 olet tekem盲ss盲 \n"
-"ennen kuin muutat n盲it盲 asetuksia!!\n"
-"\n"
-"\"Lis盲asetukset\"-painike t盲ss盲 valikossa mahdollistaa useat edistyneet\n"
-"vaihtoehdot, jotka ovat varattuja Asiantuntijalle."
+msgid "Moving"
+msgstr "Siirr盲n"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
+"Drakbackup activities via %s:\n"
"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
msgstr ""
-"T盲m盲 on t盲rkein p盲盲t枚s joka koskee GNU/Linux j盲rjestelm盲si turvallisuutta:\n"
-"sinun pit盲盲 sy枚tt盲盲 \"root\" salasana. \"Root\" on j盲rjestelm盲n yll盲pit盲j盲\n"
-"ja ainoa, jolla on oikeudet p盲ivitt盲盲 j盲rjestelm盲盲, lis盲t盲 k盲ytt盲ji盲, "
-"muuttaa\n"
-"j盲rjestelm盲n asetuksia, jne. Lyhyesti, \"root\" voi tehd盲 mit盲 vain! T盲m盲n\n"
-"vuoksi sinun pit盲盲 valita salasana joka on vaikea arvata - DrakX kertoo\n"
-"sinulle jos salasana on liian helppo. Kuten huomaat, voit j盲tt盲盲 \n"
-"salasanan sy枚tt盲m盲tt盲, mutta suosittelemme ettet tee niin, ainakin yhdest盲\n"
-"syyst盲: vaikka olet k盲ynnist盲nyt GNU/Linuxin, t盲m盲 ei tarkoita sit盲 ett盲\n"
-"muut k盲ytt盲m盲si k盲ytt枚j盲rjestelm盲t ovat suojattuja virheist盲. Koska \"root"
-"\"\n"
-"voi ohittaa kaikki rajoitukset ja vahingossa poistaa kaikki tiedot\n"
-"osioista, on t盲rke盲盲 ett盲 on vaikea p盲盲st盲 \"root\" k盲ytt盲j盲ksi.\n"
-"\n"
-"Salasanan pit盲isi koostua aakkosista ja numeroista sek盲 olla enemm盲n\n"
-"kuin 8 merkki盲 pitk盲. 脛l盲 koskaan kirjoita \"root\" salasanaa paperille - "
-"se\n"
-"tekisi j盲rjestelm盲盲n murtautumisesta liian helppoa.\n"
"\n"
-"脛l盲 my枚sk盲盲n valitse liian pitk盲盲 tai monimutkaista salasanaa koska sinun\n"
-"pit盲盲 my枚s muistaa se ongelmitta.\n"
-"\n"
-"Salasanaa ei n盲ytet盲 kun sy枚t盲t sit盲 ja t盲st盲 syyst盲 sinun pit盲盲 sy枚tt盲盲\n"
-"se kahdesti, jolla pyrit盲盲n ehk盲isem盲盲n kirjoitusvirheit盲. Jos sattumalta\n"
-"teet saman kirjoitusvirheen kahdesti, joudut k盲ytt盲m盲盲n t盲t盲 ``v盲盲r盲盲''\n"
-"salasanaa ensimm盲isess盲 sis盲盲nkirjautumisessa.\n"
-"\n"
-"Jos haluat ett盲 t盲m盲n koneen k盲ytt枚lupa hallitaan tunnistuspalvelimen\n"
-"kautta, paina \"Lis盲asetukset\" painiketta.\n"
-"\n"
-"Jos verkkosi k盲ytt盲盲 LDAP, NIS, tai PDC Windows verkkoalueen tunnistus-\n"
-"palvelua, valitse oikea \"tunnistus\" vaihtoehto. Jos sinulla ei ole\n"
-"tietoa, kysy verkon yll盲pit盲j盲lt盲.\n"
+"Drakbackup toimintoja %s kautta:\n"
"\n"
-"Jos sinulla on ongelmia muistaa salasanoja, voit valita \"Ei salasanaa\",\n"
-"tai jos koneesi ei ole yhteydess盲 Internettiin, tai jos uskot kaikkiin\n"
-"koneesi k盲ytt盲jiin."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Valitse oikea portti. Esimerkiksi \"COM1\" portti Windowsissa\n"
-"on nimetty \"ttyS0\":ksi GNU/Linuxissa."
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"DrakX yleens盲 tunnistaa hiiren n盲pp盲inten m盲盲r盲n. Jos tunnistus ep盲onnistuu\n"
-"DrakX olettaa, ett盲 sinulla on kaksin盲pp盲iminen hiiri ja kytkee siihen \n"
-"kolmannen n盲pp盲imen emulaatiolla. Kolmatta n盲pp盲int盲 kaksin盲pp盲imisess盲\n"
-"hiiress盲 voidaan k盲ytt盲盲 painamalla molemmat painikkeet samanaikaisesti.\n"
-"DrakX tiet盲盲 my枚s automaattisesti, onko se PS/2, sarja- vai USB-hiiri.\n"
-"\n"
-"Jos haluat asettaa eri tyyppisen hiiren, valitse sopiva tyyppi oheisesta\n"
-"listasta.\n"
-"\n"
-"Jos valitset muun kuin oletushiiren, saat eteesi hiiren testiruudun. K盲yt盲\n"
-"hiiren nappeja ja rullaa varmistaaksesi, ett盲 asetukset ovat oikeat. Jos\n"
-"hiiri ei toimi kunnolla, paina v盲lily枚nti盲 tai [enter]:i盲 peruuttaaksesi, "
-"mink盲\n"
-"j盲lkeen voit valita uudelleen.\n"
-"\n"
-"Joskus rullahiiri盲 ei tunnisteta oikein. Sinun pit盲盲 valita oikea malli\n"
-"listasta. Varmista, ett盲 valitset mallin joka vastaa porttia johon hiiresi "
-"on\n"
-"liitetty. Kun olet painanut \"Seuraava ->\", hiiren kuva tulee esille. "
-"Sitten\n"
-"sinun PIT脛脛 py枚ritt盲盲 rullaa, jotta se aktivoituisi oikein. Varmista sitten\n"
-"kaikkien painikkeiden toiminta sek盲 hiiren liikkuminen."
+msgid "("
+msgstr "("
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
+"Welcome to The Network Configuration Wizard.\n"
"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
-"Valitsemasi oletuskieli p盲盲tt盲盲 mink盲 kielinen dokumentaatio asennetaan,\n"
-"kuten my枚s asennusohjelman ja j盲rjestelm盲n kielen. Valitse ensin miss盲\n"
-"asut, ja sitten mit盲 kielt盲 k盲yt盲t.\n"
-"\n"
-"Painamalla \"Lis盲asetukset\"-painiketta saat mahdollisuuden valita my枚s\n"
-"muita kieli盲 asennettavaksi ty枚asemallesi. Muiden kielien valitseminen\n"
-"asentaa kielikohtaiset tiedostot j盲rjestelm盲n dokumentoinnista ja\n"
-"ohjelmistoista. Esimerkiksi jos sinulla koneessasi espanjalaisia \n"
-"k盲ytt盲ji盲, valitse englanti (tai suomi) p盲盲kieleksi ja lis盲asetusten\n"
-"puolelta Espanjaa.\n"
-"\n"
-"Huomaa, ett盲 voit valita useita kieli盲. Voit valita monta niist盲, tai\n"
-"jopa kaikki valisemalla \"Kaikki kielet\". Kielituen valinta tarkoittaa\n"
-"k盲盲nn枚ksien, kirjasinten, oikoluku-ohjelmien, jne. asentaminen sille\n"
-"kielelle.\n"
-"T盲m盲n lis盲ksi voit valita \"K盲yt盲 Unicode oletuksena\" joka pakottaa\n"
-"j盲rjestelm盲n k盲ytt盲m盲盲n unicodea (UTF-8). Huomaa kuitenkin ett盲 t盲m盲\n"
-"on ominaisuus joka on kokeluvaiheessa. Jos valiset eri kielet joka\n"
-"tarvitsevat eri koodausta, asennetaan unicode tuki t盲st盲 valinnasta\n"
-"huolimatta.\n"
+"Tervetuloa verkon asettamisvelhoon\n"
"\n"
-"Vaihtaaksesi eri kielten v盲lill盲, voit suorittaa \"/usr/bin/localedrake\"\n"
-"\"root\"-k盲ytt盲j盲n盲,jolloin vaihdat koko j盲rjestelm盲n kielt盲, tai \n"
-"tavallisena\n"
-"k盲ytt盲j盲n盲 jolloin vaihdat vain sen k盲ytt盲j盲n vakiokielen."
+"Seuraavassa vaiheessa m盲盲ritell盲盲n Internet- / verkkoasetuksesi.\n"
+"Jos et halua k盲ytt盲盲 automaattista tunnistusta, poista kyseinen valinta.\n"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Tavallisesti DrakX valitsee sinulle oikean n盲pp盲imist枚n sen mukaan, mink盲\n"
-"kielen olet valinnut. Kuitenkaan sinulla ei v盲ltt盲m盲tt盲 ole n盲pp盲imist枚盲,\n"
-"joka vastaa suoraan kielt盲si. Jos olet esimerkiksi englanninkielinen\n"
-"sveitsil盲inen, voit silti haluta sveitsil盲isen n盲pp盲imist枚n. Tai jos puhut\n"
-"Englantia, mutta asut Quebeciss盲, sinulla voi olla samanlainen tilanne,\n"
-"miss盲 kieli ja n盲pp盲imist枚 eiv盲t vastaa toisiaan. Molemmissa tapauksissa\n"
-"t盲m盲 asennusvaihe antaa sinulle mahdollisuuden valita sopiva n盲pp盲imist枚\n"
-"listasta.\n"
-"\n"
-"Paina \"Lis盲盲\"-painiketta saadaksesi t盲ydellisen listan tuetuista \n"
-"n盲pp盲imist枚ist盲. \n"
-"\n"
-"Jos valitset n盲pp盲imist枚n joka ei perustu latinalaiseen kirjaimistoon, \n"
-"sinulta kysyt盲盲n n盲pp盲inyhdistelm盲盲 joka vaihtaa latinalaisen \n"
-"ja ei-latinalaisen j盲rjestyksen v盲lill盲."
+msgid ")"
+msgstr ")"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"T盲m盲 vaihe asennuksesta n盲ytet盲盲n ainoastaan jos vanha GNU/Linux\n"
-"osio on l枚ydetty koneessasi.\n"
-"\n"
-"DrakX haluaa nyt tiet盲盲, jos haluat suorittaa uuden asennuksen vai vanhan\n"
-"Mandrake Linux -j盲rjestelm盲n p盲ivityksen:\n"
-"\n"
-" * \"Asenna\": oletuksena t盲m盲 tapa poistaa vanhan asennuksen. Jos haluat\n"
-"muuttaa miten kovalevysi on osioitu tai vaihtaa tiedostoj盲rjestelm盲盲, sinun\n"
-"kannattaa valita t盲t盲 vaihtoehto. Riippuen nykyisest盲 osioinnistasi, voit\n"
-"ehk盲 valita niin ettei kaikkia tietojasi h盲vitet盲.\n"
-"\n"
-" * \"P盲ivit盲\": t盲m盲 vaihtoehto sallii sinua p盲ivitt盲m盲盲n paketteja\n"
-"nykyisess盲 Mandrake Linux -j盲rjestelm盲ss盲si. Nykyist盲 osiointiasi ei\n"
-"muuteta, eik盲 k盲ytt盲jien tietoja muuteta. Suurin osa muista asennus-\n"
-"vaiheista on k盲yt枚ss盲si, niin kuin ne ovat vakioasennuksessa.\n"
-"\n"
-"``P盲ivit盲''-ominaisuuden pit盲isi toimia Mandrake Linux \n"
-"-j盲rjestelmiss盲 versioista \"8.1\" ja uudemmat. Vanhemman version\n"
-"kuin \"8.1\" p盲ivitt盲mist盲 ei suositella."
+msgid "Lebanon"
+msgstr "Libanon"
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Maa\": takista maa-asetukset. jos et ole maassa, joka on valittu, \n"
-"paina \"M盲盲rittele\" painiketta ja valitse joku muu. Jos maasi ei ole\n"
-"listassa, paina \"Lis盲盲\" painiketta jolloin n盲et listan kaikista maista."
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../help.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Enemmm盲n kuin yksi Microsoft osio on l枚ydetty kovalevyst盲si. Ole hyv盲 ja\n"
-"valitse osio jota haluat pienent盲盲 jotta pystyisit asentamaan uuden "
-"Mandrake\n"
-"Linux k盲ytt枚j盲rjestelm盲si.\n"
-"\n"
-"Jokainen osio on lueteltu seuraavasti: \"Linux nimi\", Windows nimi\", \"Koko"
-"\".\n"
-"\n"
-"\"Linux nimi\" rakenne on seuraava: \"kovalevytyyppi\". \"kovalevynumero"
-"\", \n"
-"\"osionumero\" (esim. \"hda1\").\n"
-"\n"
-"\"kovalevytyyppi\" on \"hd\" jos kovalevysi on IDE-kovalevy ja \"sd\" jos\n"
-"se on SCSI kovalevy.\n"
-"\n"
-"\"kovalevynumero\" on aina aakkonen \"hd\":n tai \"sd\":n per盲ss盲.\n"
-"IDE-kovalevyille: \n"
-"\n"
-" * \"a\" tarkoittaa \"is盲nt盲levy ensisijaisella IDE ohjaimella\";\n"
-"\n"
-" * \"b\" tarkoittaa \"orjalevy ensisijaisella IDE ohjaimella\";\n"
-"\n"
-" * \"c\" tarkoittaa \"is盲nt盲levy toissijaisella IDE ohjaimella\";\n"
-"\n"
-" * \"d\" tarkoittaa \"orjalevy toisssijaisella IDE ohjaimella\";\n"
-"\n"
-" * ja niin edelleen...\n"
-"\n"
-"SCSI kovalevyill盲 \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" tarkoittaa\n"
-"\"toiseksi pienin SCSI ID\", jne.\n"
-"\n"
-"\"Windows nimi\" on Windowsissa n盲kyv盲 osiota vastaava aakkonen.\n"
-"(ensimm盲inen osio on \"C:\", seuraava \"D:\", jne.)"
+msgid "Stop"
+msgstr "Pys盲yt盲"
-#: ../../help.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"T盲ss盲 vaiheessa sinun pit盲盲 m盲盲ritt盲盲 mitk盲 osiot k盲ytet盲盲n Mandrake Linux\n"
-"j盲rjestelm盲si asennuksessa. Jos osioita on jo m盲盲ritelty, joko edellisest盲\n"
-"GNU/Linux asennuksesta, tai jonkun toisen osiointity枚kalun tekem盲t, niin\n"
-"voit k盲ytt盲盲 olemassa olevia osioita. Muissa tapauksissa osiot pit盲盲 luoda.\n"
-"\n"
-"Luodaksesi osioita, sinun pit盲盲 ensin valita kovalevy. Voit valita \n"
-"osioitavan levyn painamalla 'hda' ensimm盲iselle IDE-levylle, 'hdb' "
-"toiselle,\n"
-"'sda' ensimm盲iselle SCSI-levylle ja niin edelleen.\n"
-"\n"
-"Osioidaksesi valitun levyn voit valita n盲ist盲 vaihtoehdoista:\n"
-"\n"
-" * \"Tyhjenn盲 kaikki\": t盲m盲 toiminto poistaa kaikki osiot kovalevyll盲;\n"
-"\n"
-" * \"Automaattinen varaus\": t盲m盲 toiminto luo automaattisesti tarvittavat\n"
-"ext3 osiot ja sivutusosion levyn tyhj盲st盲 tilasta;\n"
-"\n"
-"\"Lis盲盲\": n盲ytt盲盲 seuraavat lis盲toiminnot:\n"
-"\n"
-" * \"Tallenna osiotaulu\": tallentaa osiotaulun levykkeelle. T盲m盲 on\n"
-"hy枚dyllinen levyke, jos pit盲盲 palauttaa osiotaulu. Suosittelemme\n"
-"t盲m盲n levykkeen tekoa;\n"
-"\n"
-" * \"Palauta osiotaulu\": palauttaa aikaisemmin tallennetun osiotaulun\n"
-"levykkeelt盲;\n"
-"\n"
-" * \"Pelasta osiotaulu\": jos osiotaulusi on viottunut, voit kokeilla sen\n"
-"korjaamista t盲ll盲 toiminnolla. Ole varovainen, ja muista ett盲 t盲m盲\n"
-"voi ep盲onnistua;\n"
-"\n"
-" * \"Uudelleenlataa osiotaulu\": hylk盲盲 kaikki tekem盲si muutokset ja\n"
-"palauta alkuper盲inen osiotaulu;\n"
-"\n"
-" * \"Vaihdettavan median automaattinen liitt盲minen\": t盲m盲n valinnan\n"
-"poistaminen pakottaa k盲ytt盲j盲t itse liitt盲m盲盲n ja irrottamaan vaihdettavat\n"
-"mediat, esim. levykkeet ja cd-levyt.\n"
-"\n"
-" * \"Velho\": valitse t盲m盲 vaihtoehto jos haluat Velhon osioimaan\n"
-"kovalevysi. T盲m盲 on suositeltu sinulle jos osiointi ei ole tuttu;\n"
-"\n"
-" * \"Peruuta\": t盲m盲 vaihtoehto poistaa tekem盲si muutokset;\n"
-"\n"
-" * \"Vaihda Vakio/Asiantuntija-tilaan\": sallii lis盲toimintoja osioille \n"
-"(tyyppi, optiot, formaatti) ja n盲ytt盲盲 lis盲tietoja;\n"
-"\n"
-" * \"Valmis\": kun kovalevyn osionti on valmis, t盲m盲 toiminto tallentaa\n"
-"tekem盲si muutokset levylle ja jatkaa asennusta.\n"
-"\n"
-"Kun m盲盲rit盲t osion kokoa, voit hienos盲盲t盲盲 kokoa k盲ytt盲m盲ll盲\n"
-"n盲pp盲imist枚n nuolin盲pp盲imi盲.\n"
-"\n"
-"Huom!: Voit my枚s k盲ytt盲盲 kaikkia toimintoja n盲pp盲imist枚ll盲. Siirry osioiden\n"
-"ja toimintojen v盲lill盲 k盲ytt盲m盲ll盲 [Tab] ja [Yl枚s/Alas] nuolin盲pp盲imi盲.\n"
-"\n"
-"Kun osio tai tyhj盲 tila on valittu voit k盲ytt盲盲:\n"
-"\n"
-" * Ctrl-C luodaksesi uuden osion (kun tyhj盲 tila on valittu);\n"
-"\n"
-" * Ctrl-D poistaaksesi osion;\n"
-"\n"
-" * Ctrl-M valitaksesi liitospisteen.\n"
-"\n"
-"Saadaksesi lis盲tietoja k盲ytett盲viss盲 olevista tiedostoj盲rjestelmist盲, lue\n"
-"lis盲盲 osasta ext2FS ``Reference Manual'':ista.\n"
-"\n"
-"Jos olet asentamassa PPC-koneelle, sinun pit盲盲 luoda pieni HFS \n"
-"``bootstrap'' osio kooltaan v盲hint盲盲n 1Mt, joka tulee yaboot k盲ynnistys-\n"
-"lataajan k盲ytt枚枚n. Jos p盲盲t盲t tehd盲 osiosta v盲h盲n suuremman, esimerkiksi \n"
-"50Mt, voi olla hyv盲 ajatus asentaa ylim盲盲r盲inen ydin ja ramdisk-kuva\n"
-"virhetilanteiden k盲ynnistystarpeeseen."
+msgid "Edit selected host"
+msgstr "Muokkaa valittua konetta"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"T盲ss盲 vaiheessa DrakX sallii sinun valita tietokoneellesi sopivan\n"
-"turvatason. Yleisesti mit盲 avoimempi koneesi on ja mit盲 enemm盲n\n"
-"t盲rke盲盲 tietoa on talletettu koneellesi, tai jos se on kytketty "
-"Internettiin,\n"
-"sit盲 korkeampi turvatason pit盲isi olla. Huomaa kuitenkin, ett盲 korkeampi\n"
-"turvallisuustaso saavutetaan yleens盲 k盲ytett盲vyyden kustannuksella.\n"
-"\n"
-"Jos et tied盲 mit盲 valita, k盲yt盲 oletuksena olevaa vaihtoehtoa."
+msgid "No CD device defined!"
+msgstr "Yht盲k盲盲n CD-asemaa ei m盲盲ritetty!"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"T盲ss盲 vaiheessa, kun asennat Mandrake Linuxia, on todenn盲k枚ist盲 ett盲\n"
-"jotkut paketit on p盲ivitetty alkujulkaisun j盲lkeen. Joitakin virheit盲 voi "
-"olla\n"
-"korjattu, ja turvallisuusaukkoja paikattu. Hy枚dynt盲盲ksesi n盲it盲 "
-"p盲ivityksi盲,\n"
-"sinulla on nyt mahdollisuus hakea ne Internetist盲. Valitse \"Kyll盲\" jos\n"
-"sinulla on toimiva Internet yhteys, tai \"Ei\" jos haluat asentaa \n"
-"p盲ivitykset my枚hemmin.\n"
-"\n"
-"Valitsemalla \"Kyll盲\", sinulle n盲ytet盲盲n lista p盲ivityspalvelimista. \n"
-"Valise l盲hin palvelin. Sen j盲lkeen sinulle n盲ytet盲盲n lista p盲ivityksist盲:\n"
-"tarkista valinnat ja paina \"Asenna\" jolloin paketit haetaan ja \n"
-"asennetaan, tai \"Peruuta\" poistuaksesi."
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgaria (foneettinen)"
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Kaikki vasta m盲盲ritellyt osiot t盲ytyy alustaa k盲ytt枚盲 varten (alustaminen\n"
-"tarkoittaa tiedostoj盲rjestelm盲n luontia).\n"
-"\n"
-"Samalla voit haluta alustaa uudelleen my枚s olemassaolevia osioita\n"
-"poistaaksesi kaiken niiss盲 olevan tiedon. Jos haluat haluat tehd盲 niin,\n"
-"valitse my枚s ne osiot.\n"
-"\n"
-"Huomaa, ett盲 sinun ei ole pakko alustaa kaikkia jo olemassa olevia\n"
-"osioita. Sinun pit盲盲 alustaa ne osiot, joilla k盲ytt枚j盲rjestelm盲\n"
-"sijaitsee (kuten \"/\", \"/usr\" ja \"/var\"), mutta voit s盲ilytt盲盲 osiot,\n"
-"joilla henkil枚kohtaiset tiedostosi sijaitsevat (tavallisesti \"/home\").\n"
-"\n"
-"Ole huolellinen osioita valitessasi. Alustamisen j盲lkeen kaikki tieto\n"
-"valituilla osioilla on poissa eik盲 niiden palauttaminen en盲盲 onnistu.\n"
-"\n"
-"Valitse \"Seuraava ->\", kun olet valmis alustamaan osiot.\n"
-"\n"
-"Valitse \"<- Edellinen\", jos haluat valita toisen osion Mandrake Linuxin\n"
-"asentamiseen.\n"
-"\n"
-"Valitse \"Lis盲asetukset\", jos haluat valita osiot, jotka tarkistetaan \n"
-"levyll盲 olevien viallisten lohkojen varalta."
+msgid "The DHCP start ip"
+msgstr "DHCP:n alueen alku"
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ole hyv盲. Asennus on valmis ja GNU/Linux -j盲rjestelm盲si on valmis\n"
-"k盲ytett盲v盲ksi. Paina \"Seuraava ->\" k盲ynnist盲盲ksesi j盲rjestelm盲n\n"
-"uudelleen.Ensimm盲ien asia mit盲 n盲et en j盲lkeen kun tietokoneesi on\n"
-"surittanut laitteistotestit, on k盲ynnistysvalikkon josta voit valita mit盲\n"
-"k盲ytt枚j盲rjestelm盲盲 haluat k盲ynnist盲盲.\n"
-"\n"
-"\"Lis盲asetukset\" painike n盲ytt盲盲 kaksi lis盲painiketta:\n"
-"\n"
-" * \"luo automaattiasennuslevyke\": luodaksesi levykkeen, joka suorittaa\n"
-"koko asennuksen ilman k盲ytt盲j盲n ohjausta, samoilla asetuksilla ja\n"
-"valinnoilla kuin nykyinen asennus.\n"
-"\n"
-" Huomaa, ett盲 t盲m盲 valinta n盲ytt盲盲 kaksi vaihtoehtoa sinulle:\n"
-"\n"
-" * \"Toista\": T盲m盲 on osittain automaattinen asennus, voit p盲盲tt盲盲\n"
-"ainoastaan levyn osioinnista;\n"
-"\n"
-" * \"Automaattinen\": T盲ysautomaattinen asennus: koko kovalevy\n"
-"kirjoitetaan uudestaan ja kaikki vanhat tiedot poistetaan.\n"
-"\n"
-" T盲m盲 toiminto helpottaa ty枚t盲, kun asennus on teht盲v盲 monille\n"
-"samanlaisille koneille. Katso meid盲n webbisivustoa, aiheella \n"
-"Automaattiasennus (Auto Install);\n"
-"\n"
-" * \"Tallenna pakettien valinta\"(*): tallentaa listan valituista \n"
-"paketeista levykkeelle. Sitten kun teet toisen asennuksen, aseta \n"
-"levyke asemaan, siirry apusivulle painamalla [F1] painiketta, ja kirjoita\n"
-"komentoriville>>linux defcfg=\"floppy\"<< ja paina 'enter'.\n"
-"\n"
-"(*) Tarvitset FAT-formatoidun levykkeen (luodaksesi levykkeen Linuxissa\n"
-"kirjoita \"mformat a:\")"
+msgid "256 kB"
+msgstr "256 kt"
-#: ../../help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-"Nyt sinun pit盲盲 valita miten haluat asentaa Mandrake Linux k盲ytt枚-\n"
-"j盲rjestelm盲n kovalevyllesi. Jos kovalevysi on tyhj盲, tai nykyinen\n"
-"k盲ytt枚j盲rjestelm盲si k盲ytt盲盲 siit盲 kaiken vapaan tilan, sinun pit盲盲 osioida\n"
-"se. K盲yt盲nn枚ss盲 osiointi tarkoittaa kovalevyn loogista jakamista\n"
-"tehd盲ksesi tilaa Mandrake Linux j盲rjestelm盲n asennukselle.\n"
-"\n"
-"Koska osiointiprosessin muutoksia yleens盲 ei voi peruuttaa, ja voi johtaa\n"
-"tietojen h盲vitt盲miselle jos toinen k盲ytt枚j盲rjestelm盲 on jo asennettu, \n"
-"osiointi voi olla pelottava ja stressaava jos olet kokematon k盲ytt盲j盲.\n"
-"Onneksi DrakX sis盲lt盲盲 velhon joka yksinkertaistaa t盲m盲n prosessin.\n"
-"Ennen kuin aloitat, lue n盲m盲 ohjeet rauhassa.\n"
-"\n"
-"Riippuen kovalevyasetuksistasi, l枚ytyy monta eri vaihtoehtoa:\n"
-"\n"
-" * \"K盲yt盲 vapaata tilaa\": t盲m盲 vaihtoehto suorittaa vapaana olevan tilan\n"
-"automaattisen osioinnon. Sinulta ei kysyt盲 mit盲盲n muuta;\n"
-"\n"
-" * \"K盲yt盲 olemassa olevat osiot\": velho on tunnistanut olemassa olevat\n"
-"Linux osiot. Jos haluat k盲ytt盲盲 niit盲, valitse t盲m盲 vaihtoehto. Sinua\n"
-"pyydet盲盲n seuraavaksi valitsemaan osioiden liitospisteet. Ennest盲盲n\n"
-"k盲ytettyj盲 liitoskohtia ehdotetaan oletuksena, ja yleens盲 niit盲 ei kannata\n"
-"muuttaa;\n"
-"\n"
-" * \"K盲yt盲 Windows osion vapaata tilaa\": jos Microsoft Windows on\n"
-"asennettu kovalevyllesi, ja se vie kaiken tilan, sinun pit盲盲 luoda vapaata\n"
-"tilaa Linuxille. Tehd盲ksesi t盲m盲n, voit joko poistaa Windows-osion (katso\n"
-"``Tyhjenn盲 koko levy'' vaihtoehto) tai muuttaa FAT osion kokoa. Osion\n"
-"koon muuttaminen voidaan tehd盲 ilman tietojen h盲vitt盲mist盲, kunhan olet\n"
-"eheytt盲nyt sen ja se k盲ytt盲盲 FAT tiedostoj盲rjestelm盲盲. Tietojen varmistus\n"
-"on suotavaa. T盲m盲 vaihtoehto on suositeltu jos haluat k盲ytt盲盲\n"
-"Mandrake Linuxia ja Microsoft Windowsia samassa koneessa.\n"
-"\n"
-"!! \"9.1\" jakelust盲 l盲htien asennusohjelmaa osaa my枚s muuttaa NTFS\n"
-" osion kokoa, mutta se on viell盲 KOKEILUVAIHEESSA, joten teet sit盲\n"
-" OMALLA VASTUULLASI. Voit menett盲盲 tietojasi !!\n"
-" Ennen kuin valitset t盲m盲n vaihtoehton, sinun pit盲盲 ymm盲rt盲盲 ett盲 t盲m盲n\n"
-"toimeenpiteen j盲lkeen Windows-osiosi on pienempi kuin t盲ll盲 hetkell盲.\n"
-"Sinulla tulee olemaan v盲hemm盲n vapaata tilaa Widowsille, johon voit\n"
-"tallentaa tietojasi tai asentaa uusia ohjelmia;\n"
-"\n"
-" * \"Tyhjenn盲 koko levy\": valitse t盲m盲 jos haluat poistaa kaikki tiedot\n"
-"ja osiot ja asentaa Mandrake Linux j盲rjestelm盲si niiden tilalle. Ole\n"
-"varovainen t盲m盲n valinnan kanssa, koska et pysty peruuttamaan\n"
-"valintaasi kun olet hyv盲ksynyt t盲m盲n toimenpiteen;\n"
-"\n"
-" !! Jos valitset t盲m盲n vaihtoehton, kaikki tiedot kovalevyll盲si tuhoutuu !!\n"
-"\n"
-" * \"Poista Windows\": t盲m盲 vaihtoehto yksinkertaisesti poistaa kaikki\n"
-"kovalevyst盲 ja aloittaa puhtaalta levylt盲 osioimalla kaikki alusta asti.\n"
-"Kaikki tiedot kovalevyll盲si tuhoutuu;\n"
-"\n"
-" !! Jos valitset t盲m盲 vaihtoehto, kaikki tiedot kovalevyll盲si tuhoutuu !!\n"
-"\n"
-" * \"Mukautettu levyn osiointi\": valitse t盲m盲 vaihtoehto, jos haluat itse\n"
-"m盲盲ritt盲盲 kovalevysi osioinnin. Ole varovainen - t盲m盲 on tehokas mutta\n"
-"vaarallinen vaihtoehto. Voit helposti menett盲盲 kaikki tietosi. Eli,\n"
-"盲l盲 k盲yt盲 t盲t盲 vaihtoehtoa, jos et tied盲 tarkalleen mit盲 teet. Jos haluat\n"
-"lis盲tietoja DiskDrake ty枚kalun k盲yt枚st盲, katso osaa ``Managing Your \n"
-"Partitions'' osio ``Starter Guide'':ssa."
+msgid "Bootloader main options"
+msgstr "K盲ytt枚j盲rjestelm盲n lataajan p盲盲asetukset"
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Lopuksi sinulta kysyt盲盲n, haluatko k盲ynnistyksess盲 graafisen \n"
-"k盲ytt枚liittym盲n. Huomaa, ett盲 kysymys esitet盲盲n vaikka et olisi \n"
-"testannut asetuksia.Haluat varmaankin vastata \"Ei\", jos koneesi \n"
-"on tarkoitettu palvelimeksi tai jos n盲yt枚n asetus ep盲onnistui."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Mik盲li on olemassa eri palvelimia ohjaimellesi, 3D tuella tai ilman,\n"
-"sinua pyydet盲盲n valitsemaan palvelin joka parhaiten vastaa tarpeitasi."
+msgid "Tape"
+msgstr "Nauha"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"N盲ytt枚tila\n"
-"\n"
-" T盲ss盲 voit valita n盲ytt枚tilan ja v盲risyvyyden jota laitteistosi tukee.\n"
-"Valitse se joka parhaiten vastaa tarpeitasi (voit tietysti vaihtaa sit盲\n"
-"asennuksen j盲lkeenkin). Malli valitusta asetuksesta n盲ytet盲盲n n盲yt枚ss盲."
+msgid "Scanning network..."
+msgstr "Tutkitaan verkkoa..."
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-"N盲ytt枚\n"
-"\n"
-" Asennusohjelma yleens盲 tunnistaa n盲ytt枚si automaattisesti.\n"
-"Jos t盲m盲 ei toimi, voit itse valita n盲ytt枚si listauksesta."
+"T盲ll盲 valitsimella voit palauttaa mink盲 tahansa version\n"
+"/etc-hakemistostasi."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-"X (eli X Ikkunointi J盲rjestelm盲) on GNU/Linuxin graafisen k盲ytt枚liittym盲n "
-"syd盲n\n"
-"jota kaikki graafiset ymp盲rist枚t (KDE, Gnome, AfterStep, WindowsMaker,\n"
-"jne.) jotka seuraavat Mandrake Linuxin mukana k盲ytt盲v盲t alustana.\n"
-"\n"
-"Sinulle n盲ytet盲盲n lista eri parametreist盲 joita voit asettaa saadaksesi\n"
-"optimaalisen graafisen n盲ytt枚:\n"
-"\n"
-"N盲yt枚nohjain\n"
-"\n"
-" Asennusohjelma yleens盲 tunnistaa ja asettaa koneeseesi asennetun\n"
-"n盲yt枚nohjaimen. Mik盲li t盲m盲 ei onnistunut, voit itse valita oikean mallin\n"
-"listasta omistamasi korttisi mukaisesti.\n"
-"\n"
-" Mik盲li eri palvelimia on k盲ytett盲viss盲 kortillesi, 3D tuella vai ilman,\n"
-"sinua pyydet盲盲n valitsemaan palvelin joka vastaa tarpeitasi.\n"
-"\n"
-"\n"
-"\n"
-"N盲ytt枚tila\n"
-"\n"
-" T盲ss盲 voit valita n盲ytt枚tilan ja v盲risyvyyden jota laitteistosi tukee.\n"
-"Valitse se joka parhaiten vastaa tarpeitasi (voit tietysti vaihtaa sit盲\n"
-"asennuksen j盲lkeenkin). Malli valitusta asetuksesta n盲ytet盲盲n n盲yt枚ss盲.\n"
-"\n"
-"\n"
-"\n"
-"Testi\n"
-"\n"
-" j盲rjestelm盲 yritt盲盲 avata graafisen n盲yt枚n halutussa n盲ytt枚tilassa.\n"
-"Jos n盲et viestin testauksen aikana ja vastaat \"Kyll盲\", DrakX jatkaa\n"
-"seuraavaan vaiheeseen. Jos et n盲e viesti盲, se tarkoittaa ett盲 jokin osa\n"
-"tunnistuksesta oli virheellist盲, ja testi loppuu automaattisesti 12 "
-"sekunnin\n"
-"j盲lkeen, jolloin p盲盲set takaisin asetusvalikoon. Muuta asetuksia kunnes\n"
-"saat oikean graafisen n盲yt枚n.\n"
-"\n"
-"\n"
-"\n"
-"Optiot\n"
-"\n"
-" T盲盲ll盲 voit valita jos haluat ett盲 j盲rjestelm盲 automaattisesti k盲ytt盲盲\n"
-"graafista sis盲盲nkirjautumista k盲ynnistyksess盲. Luonnollisesti valitset\n"
-"\"Ei\" jos koneesi toimii palvelimena, tai jos et pystynyt m盲盲ritt盲m盲盲n\n"
-"toimivaa graafista tilaa."
+msgid "Malaysia"
+msgstr "Malesia"
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"N盲yt枚nohjain\n"
-"\n"
-" Asennusohjelma yleens盲 tunnistaa ja asettaa koneeseesi asennetun\n"
-"n盲yt枚nohjaimen. Mik盲li t盲m盲 ei onnistunut, voit itse valita oikean mallin\n"
-"listasta omistamasi kortin mukaisesti.\n"
-"\n"
-" Mik盲li eri palvelimia on k盲ytett盲viss盲 kortillesi, 3D tuella vai ilman,\n"
-"sinua pyydet盲盲n valitsemaan palvelin joka vastaa tarpeitasi."
+msgid "Swiss (French layout)"
+msgstr "Sveitsi (Ranskalainen j盲rjestys)"
-#: ../../help.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux m盲盲ritt盲盲 ajan GMT (Greenwich Mean Time) -tilassa, ja k盲盲nt盲盲\n"
-"siit盲 paikalliseen aikaan valitsemasi aikavy枚hykkeen mukaisesti. Voit my枚s\n"
-"muuttaa t盲m盲n k盲yt盲nn枚n poistamalla valinnan \"Laitteistokello asetettu\n"
-"GMT-aikaan\" jolloin laitteistokello on sama kuin j盲jestelm盲kello. T盲m盲 on\n"
-"hy枚dyllist盲 jos koneessa on toinen k盲ytt枚j盲rjestelm盲, esim. Windows.\n"
-"\n"
-"Optio \"Automaattinen kellon synkronointi\" s盲盲t盲盲 j盲rjestelm盲si kellon\n"
-"automaattisesti oikeaan aikaan yhdist盲m盲ll盲 johonkin Internetin aika-\n"
-"palvelimeen. Valitse listasta palvelin joka on l盲hell盲si, tai kirjoita sen\n"
-"osoite suoraan kentt盲盲n. Sinulla pit盲盲 tietysti olla toimiva Internet-\n"
-"yhteys jotta t盲m盲 ominaisuus toimisi. T盲m盲 my枚s asentaa aikapalvelimen\n"
-"koneeseesi jota muut paikallisverkkosi koneet voivat k盲ytt盲盲."
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid ep盲onnistui (ehk盲 raidtools puuttuu?)"
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Voit nyt valita mitk盲 palvelut haluat k盲ynnist盲盲 konetta k盲ynnistett盲ess盲.\n"
-"\n"
-"DrakX listaa kaikki palvelut, jotka l枚ytyv盲t nykyisest盲 asennuksesta.\n"
-"K盲y lista l盲pi huolellisesti ja poista kaikki ne palvelut, joita ei tarvita\n"
-"jokaisella k盲ynnistyskerralla.\n"
-"\n"
-"Saat kustakin palvelusta lyhyen kuvaustekstin valitsemalla sen. Jos et\n"
-"kuitenkaan ole varma palvelun hy枚dyllisyydest盲, on yleens盲 varmempaa\n"
-"j盲tt盲盲 se oletusarvoiseksi.\n"
-"\n"
-"!!\n"
-"T盲ss盲 vaiheessa sinun pit盲盲 olla erityisen huolellinen, jos aiot k盲ytt盲盲\n"
-"konettasi palvelimena: et varmaankaan halua k盲ynnist盲盲 niit盲 palveluita,\n"
-"joita et tarvitse. Muista my枚s, ett盲 jotkin palvelut voivat olla \n"
-"vaarallisia, jos ne ovat aktivoituja palvelimessa. Yleens盲 kannattaa\n"
-"valita vain ne palvelut, joita todella tarvitaan.\n"
-"!!"
+msgid "Webcam"
+msgstr "Webbikamera"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Tulostin\": painamalla \"M盲盲rittele\" painiketta avautuu tulostimen\n"
-"asetusvelho. Katso t盲t盲 vastaava luku ``Starter Guide'' saadaksesi\n"
-"lis盲盲 tietoa miten asetat uuden tulostimen. Oppaassa n盲ytetty\n"
-"k盲ytt枚liittym盲 on vastaava kuin asennuksen aikana k盲ytetty."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Prosessorin (kakkostason) v盲limuistin koko"
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
-"Sinulla on nyt mahdollisuus asettaa Internet-/verkkoyhteytesi. Jos haluat\n"
-"yhdist盲盲 tietokoneesi Internettiin tai l盲hiverkkoon, paina \"Seuraava->\".\n"
-"Mandrake Linux yritt盲盲 tunnistaa verkkolaitteet ja modeemit\n"
-"automaattisesti. Jos t盲m盲 tunnistus ep盲onnistuu, poista valinta kohdasta\n"
-" \"K盲yt盲 automaattitunnistusta\" seuraavalla kerralla. Voit my枚s j盲tt盲盲\n"
-"verkon asettamisen tekem盲tt盲, tai tehd盲 sen my枚hemmin. Siin盲\n"
-"tapauksessa paina \"Peruuta\" painiketta jolloin siirryt seuraavaan\n"
-"vaiheeseen.\n"
-"\n"
-"Kun asetat verkkosi, seuraavat yhteystavat ovat tarjolla:\n"
-"tavallinen modeemi, ISDN modeemi, ADSL yhteys, kaapelimodeemi, \n"
-"ja tavallinen l盲hiverkkoyhteys (Ethernet).\n"
-"\n"
-"Emme k盲y l盲pi kaikkia asetusoptioita t盲盲ll盲 - muistutamme vain\n"
-"ett盲 sinun kannattaa varmistaa ett盲 sinulla on kaikki tarvittavat tiedot\n"
-"k盲ytett盲viss盲, kuten: mahdollinen IP-osoite, oletus yhdysk盲yt盲v盲,\n"
-"DNS palvelinten osoitteet jne. Internet-palveluntarjoajaltasi tai\n"
-"j盲rjestelm盲n yll盲pit盲j盲lt盲.\n"
-"\n"
-"Voit katsoa ``Starter Guide'':sta Internetyhteyksi盲 koskevia tietoja\n"
-"asetuksien tekemisest盲 tai odottaa kunnes j盲rjestelm盲si on asennettu ja\n"
-"k盲ytt盲 m盲盲ritysohjelmaa yhteytesi asettamiseen."
+msgid "Soundcard"
+msgstr "脛盲nikortti"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-"Jos valitsit mahdollisuuden valita yksitt盲isi盲 paketteja, sinulle\n"
-"n盲ytet盲盲n hakemistopuu, jossa kaikki paketit ovat luokiteltuina ryhmien\n"
-"ja alaryhmien mukaan. Kun selaat puuta, voit valita koko ryhm盲t, alaryhm盲t\n"
-"tai yksitt盲iset paketit.\n"
-"\n"
-"Kun valitset paketin hakemistopuussa, sen kuvaus n盲kyy oikeanpuoleisessa\n"
-"ikkunassa, jotta tiet盲isit paketin tarkoituksen.\n"
-"\n"
-"!! Jos palvelinpaketti on valittu, joko tarkoituksella tai koska se kuului\n"
-"johonkin valitsemaasi ryhm盲盲n, sinulta pyydet盲盲n vahvistusta,\n"
-"haluatko varmasti asentaa palvelimen. Mandrake Linuxin alla jokainen\n"
-"asennettu palvelin k盲ynnistet盲盲n koneen k盲ynnistyksen yhteydess盲.\n"
-"Vaikka ne ovat turvallisia eik盲 niill盲 ole tunnettuja ongelmia jakelun\n"
-"julkaisuajankohtana, niist盲 voi l枚yty盲 turvallisuusreiki盲 jakelun\n"
-"valmistumisen j盲lkeen. Jos et tied盲 mihin joku tietty palvelu on\n"
-"tarkoitettu, tai miksi sit盲 asennetaan, paina \"Ei\". Jos painat \"Kyll盲\"\n"
-"listatut palvelut asennetaan sek盲 k盲ynnistet盲盲n automattisesti\n"
-"oletuksena koneen k盲ynnistyksess盲 !!\n"
-"\n"
-"Optio \"N盲yt盲 automaattisesti valitut paketit\" est盲盲 virhedialogin\n"
-"joka ilmestyy joka kerta kun asennusohjelma automaattisesti valitsee\n"
-"paketin riippuvuuksien t盲ytt盲miseksi. Jotkut paketit sis盲lt盲v盲t\n"
-"riippuvuuksia jotka vaativat ett盲 joku toinen paketti on jo asennettu ennen\n"
-"kuin se voidaan asentaa. Asennusohjelma osaa itse huolehtia siit盲\n"
-"ett盲 n盲m盲 riippuvuudet on t盲ytetty jotta asennus valmistuisi\n"
-"onnistuneesti.\n"
-"\n"
-"Listauksen alla olevalla levykkeen kuvakkeella voit hakea pakettilistan\n"
-"joka on luotu edellisess盲 asennuksessa. T盲m盲 on hy枚dyllist盲 jos sinulla\n"
-"on monta konetta joihin haluat suorittaa samanlaisen asennuksen.\n"
-"Jos painat t盲t盲 kuvaketta, sinua pyydet盲盲n asettamaan levyke joka\n"
-"on luotu toisen asennuksen lopussa. Katso edellisen vaiheen toisesta\n"
-"vihjeest盲, miten luot sellaisen levykkeen."
+"Tulostaaksesi tiedoston komentorivilt盲 (p盲盲teikkunasta) k盲yt盲 komentoa \"%s "
+"<tiedosto>\".\n"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nyt on aika valita mit盲 ohjelmia haluat asentaa j盲rjestelm盲盲si. Tarjolla\n"
-"on tuhansia paketteja Mandrake Linux jakelussa, ja pakettien\n"
-"hallinnan helpottamiseksi ne on koottu samanlaisten ohjelmistojen\n"
-"ryhmiin.\n"
-"\n"
-"Paketit on ryhmitelty ryhmiin koneesi k盲ytt枚tarkoituksen mukaisesti.\n"
-"Mandrake Linux sis盲lt盲盲 nelj盲 eri ennakoon m盲盲ritetty盲 asennustapaa.\n"
-"Voit verrata asennustapoja pakettiryhmiin. Voit tietysti asentaa paketteja\n"
-"eri ryhmist盲 niin halutessasi, joten ``Ty枚asema'' asennus voi esimerkiksi \n"
-"sis盲lt盲盲 ohjelmia ``Kehitysymp盲rist枚'' ryhm盲st盲.\n"
-"\n"
-" * \"Ty枚asema\": Jos aiot k盲ytt盲盲 konettasi ty枚asemana, valitse yksi tai \n"
-"useampi ohjelma t盲st盲 ryhm盲st盲;\n"
-"\n"
-" * \"Kehitysymp盲rist枚\": Jos konettasi aiotaan k盲ytt盲盲 ohjelmakehitykseen, \n"
-"valitse yksi tai useampi haluttu paketti t盲st盲 ryhm盲st盲;\n"
-"\n"
-" * \"Palvelin\": Jos koneesi on tarkoitettu toimimaan palvelimena'\n"
-"valitse yksi tai useampi haluttu palvelu tai palvelinohjelma t盲st盲\n"
-"ryhm盲st盲;\n"
-"\n"
-" * \"Graafinen ymp盲rist枚\": t盲盲lt盲 valitset haluamasi graafisen ymp盲rist枚n.\n"
-"Ainakin yksi pit盲盲 olla valittu jos haluat graafisen ty枚aseman!\n"
-"\n"
-"Jos siirr盲t hiiren kohdistinta ryhm盲nimen yl盲puolella, lyhyt selostus\n"
-"ryhm盲n sis盲ll枚st盲 tulee n盲kyviin. Jos poistat kaikki ryhm盲valinnat kun\n"
-"teet tavallisen asennuksen (p盲ivityksen sijasta), esille tulee dialogi-\n"
-"ikkuna, joka ehdottaa kolmea eri optiota v盲himm盲isasennukseen:\n"
-"\n"
-" * \"X palvelimella\" : asenna vain tarvittavat paketit, joilla saat \n"
-"toimivan graafisen ty枚p枚yd盲n;\n"
-"\n"
-" * \"Perusdokumentaation kanssa\": asentaa perusj盲rjesm盲n ja\n"
-"perusty枚kalut sek盲 niiden dokumentaatiot. T盲m盲 valinta sopii\n"
-"palvelinasennukseen;\n"
-"\n"
-" * \"V盲himm盲isasennus\": asentaa ainoastaan tarvittavat osat saadaksesi\n"
-"toimivan komentorivipohjaisen Linux-j盲rjestelm盲n. T盲m盲 asennus vie vain\n"
-"noin 65 Mt tilaa.\n"
-"\n"
-"Voit valita \"Yksitt盲isten pakettien valinta\" jos tarjolla olevat \n"
-"paketit ovat tuttuja sinulle tai jos haluat t盲ydellisen\n"
-"ohjauksen asennettavista paketeista.\n"
-"\n"
-"Jos aloitit asennuksen \"P盲ivit盲\" - tilassa, voit poistaa kaikkien ryhmien\n"
-"valinnat v盲ltt盲盲ksesi uusien pakettien asentamisen. T盲m盲 on hy枚dyllist盲\n"
-"jos haluat korjata tai p盲ivitt盲盲 olemassaolevan j盲rjestelm盲n."
+msgid "Level %s\n"
+msgstr "Taso %s\n"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Mandrake Linuxin asennus koostuu useasta CD-ROM-levyst盲. DrakX\n"
-"tiet盲盲, onko valittu paketti toisella CD:ll盲 ja osaa sy枚tt盲盲 nykyisen levyn\n"
-"ulos ja pyyt盲盲 sinua asettamaan oikea levy tarvittaessa."
+msgid "Luxembourg"
+msgstr "Luxemburg"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" DrakBackup Daemon Report\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-"T盲ss盲 on listaus olemassaolevista tunnistetuista Linux osioita\n"
-"kovalevyll盲si. Voit s盲ilytt盲盲 velhon tekem盲t valinnat, koska ne ovat\n"
-"hyvi盲 useimmille yleisimmille asennuksille. Jos teet muutoksia, sinun\n"
-"pit盲盲 ainakin luoda juuri-osion(\"/\"). 脛l盲 valitse liian pient盲 osiota tai\n"
-"et voi asentaa riitt盲v盲sti ohjelmia.\n"
-"Jos haluat tallentaa tietojasi erilliselle osiolle, sinun t盲ytyy luoda my枚s\n"
-"\"/home\" osio (mahdollista vain jos sinulla on enemm盲n kuin yksi Linux-\n"
-"osio k盲ytett盲viss盲).\n"
-"\n"
-"Jokainen osio on listattu seuraavasti: \"Nimi\", \"Koko\".\n"
-"\n"
-"\"Nimi\" rakenne on seuraava: \"kovalevytyyppi\". \"kovalevynumero\", \n"
-"\"osionumero\" (esim. \"hda1\").\n"
-"\n"
-"\"kovalevytyyppi\" on \"hd\" jos kovalevysi on IDE-kovalevy, ja \"sd\" jos\n"
-"se on SCSI kovalevy.\n"
-"\n"
-"\"kovalevynumero\" on aina aakkonen \"hd\":n tai \"sd\":n per盲ss盲.\n"
-"IDE-kovalevyille: \n"
-"\n"
-" * \"a\" tarkoittaa \"is盲nt盲levy ensisijaisella IDE-ohjaimella\";\n"
-"\n"
-" * \"b\" tarkoittaa \"orjalevy ensisijaisella IDE-ohjaimella\";\n"
-"\n"
-" * \"c\" tarkoittaa \"is盲nt盲levy toissijaisella IDE-ohjaimella\";\n"
"\n"
-" * \"d\" tarkoittaa \"orjalevy toisssijaisella IDE-ohjaimella\";\n"
+" DrakBackup-demonin raportti\n"
"\n"
-" * ja niin edelleen...\n"
"\n"
-"SCSI kovalevyill盲, \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" tarkoittaa\n"
-"\"toiseksi pienin SCSI ID\", jne..."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux on monen k盲ytt盲j盲n j盲rjestelm盲, ja t盲m盲 tarkoittaa ett盲 jokainen\n"
-"k盲ytt盲j盲 voi pit盲盲 omat asetukset, omat tiedostot jne. Voit lukea \n"
-"``Starter Guide'' saadaaksesi lis盲盲 tietoa t盲st盲. Mutta \"root\"-k盲ytt盲j盲盲n\n"
-"verrattuna k盲ytt盲j盲t, joita lis盲盲t t盲盲ll盲, eiv盲t pysty muuttamaan mit盲盲n\n"
-"muuta paitsi omia tiedostojaan ja asetuksiaan. T盲ll盲 tavalla suojataan\n"
-"j盲rjestelm盲盲 erehdyksilt盲 tai tahallisista muutoksista, jotka vaikuttavat\n"
-"j盲rjestelm盲盲n. Sinun pit盲盲 luoda ainakin yksi tavallinen k盲ytt盲j盲 "
-"itsellesi.\n"
-"Se on tili jota sinun kannattaa k盲ytt盲盲 jokap盲iv盲isess盲 ty枚ss盲si.\n"
-"Vaikka on k盲tev盲mpi kirjoittautua sis盲盲n \"root\"-tunnuksella, se on my枚s\n"
-"paljon vaarallisempi! Pienikin virhe voi tarkoittaa ettei j盲rjestelm盲si\n"
-"toimi en盲盲. Jos teet vakavan virheen tavallisena k盲ytt盲j盲n盲, voit \n"
-"mahdollisesti menett盲盲 jotain tietoja, mutta et koko j盲rjestelm盲盲.\n"
-"\n"
-"Ensin sinun pit盲盲 antaa oikea nimesi. T盲m盲 ei ole pakollista -- voithan\n"
-"kirjoittaa mit盲 tahansa. DrakX kopioi ensimm盲isen kirjoittamasi sanan\n"
-"kentt盲盲n: \"K盲ytt盲j盲tunnus\". T盲m盲 on se nimi jolla kyseinen k盲ytt盲j盲\n"
-"kirjoittautuu j盲rjestelm盲盲n. Voit muuttaa sit盲 halutessasi. Sinun pit盲盲\n"
-"my枚s sy枚tt盲盲 salasana. Tavallisen k盲ytt盲j盲n salasana ei ole niin\n"
-"kriittinen kuin \"root\"-tunnus turvallisuusn盲k枚kulmasta, mutta t盲m盲\n"
-"ei ole syy tietoturvan laiminly枚miseen:\n"
-"Onhan kysymys tiedostojesi turvasta.\n"
-"\n"
-"Kun painat \"Hyv盲ksy k盲ytt盲j盲\", voit lis盲t盲 muita k盲ytt盲ji盲. Lis盲盲\n"
-"k盲ytt盲j盲 jokaiselle henkil枚lle jonka on tarkoitus k盲ytt盲盲 t盲t盲 "
-"tietokonetta.\n"
-"Kun olet lis盲nnyt kaikki haluamasi k盲ytt盲j盲t, valitse \"Seuraava ->\".\n"
-"\n"
-"Jos painat \"Lis盲asetukset\" painiketta voit muuttaa vakio\n"
-"\"komentotulkin\" kyseiselle k盲ytt盲j盲lle (vakiona bash).\n"
-"\n"
-"Kun olet lis盲nnyt kaikki k盲ytt盲j盲t, sinulle ehdotetaan valitsemaan\n"
-"k盲ytt盲j盲 joka voi kirjoittautua automaattisesti j盲rjestelm盲盲n kun kone\n"
-"k盲ynnistyy. Jos olet kiinnostunut t盲st盲 ominaisuudesta (etk盲 paljon\n"
-"piittaa paikallisesta tietoturvasta), valitse haluttu k盲ytt盲j盲 ja\n"
-"ikkunointij盲rjestelm盲, ja paina \"Seuraava ->\". Jos et ole kiinnostunut\n"
-"t盲st盲 ominaisuudesta, poista valinta \"Haluatko k盲ytt盲盲 t盲t盲 ominaisuutta?\""
+msgid "Iran"
+msgstr "Iran"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Ennen jatkamista sinun pit盲isi lukea huolellisesti lisenssin ehdot.\n"
-"Lisenssi kattaa koko Mandrake Linux jakelun. Jos hyv盲ksyt kaikki\n"
-"ehdot, valitse \"Hyv盲ksy\" vaihtoehto. Jos et hyv盲ksy ehtoja, sinun\n"
-"tarvitsee vain sammuttaa tietokoneesi."
+msgid "Bus"
+msgstr "V盲yl盲"
-#: ../../install2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr "Sinun t盲ytyy my枚s alustaa %s"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
-"En pysty k盲ytt盲m盲盲n ytimen moduuleja jotka vastaa ydint盲si (tiedosto %s "
-"puuttuu), t盲m盲 yleens盲 tarkoittaa ett盲 k盲ynnistyslevykett盲si ei ole "
-"tahdistettu asennusmedian kanssa (luo uudempi k盲ynnistyslevyke)."
+"Mahdollinen l盲hiverkon osoiteristiriita l枚ydetty nykyisill盲 asetuksilla %s!\n"
-#: ../../install_any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"On tapahtunut virhe - ei l枚ytynyt ainuttakaan laitetta, joille voi luoda "
-"uuden tiedostoj盲rjestelm盲n. Tarkista laitteistosi korjataksesi ongelman"
+msgid "Configuring..."
+msgstr "Asetetaan..."
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Virhe lukiessa tiedostoa %s"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Asetukset on jo tehty ja ne ovat k盲yt枚ss盲."
-#: ../../install_any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"K盲ytt盲盲ksesi t盲t盲 \"tallennetut paketit\" valintaa, k盲ynnist盲 asennus "
-"optiolla \"linux defcfg=floppy\""
-
-#: ../../install_any.pm:1
-#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "T盲m盲 levyke ei ole FAT-alustettu"
+"Useimmille nykyisille TV-korteille GNU/Linux ytimen bttv-moduuli tunnistaa "
+"automaattisesti oikeat parametrit.\n"
+"Jos korttisi on tunnistettu v盲盲rin, voit pakottaa oikean vastaanottimen sek盲 "
+"kortin tyypin t盲盲ll盲. Valitse TV-korttisi parametrit tarvittaessa."
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Aseta tyhj盲 FAT-alustettu levyke levykeasemaan %s"
+msgid "Password (again)"
+msgstr "Salasana (uudelleen)"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "En voi k盲ytt盲盲 kuulutusta ilman NIS-verkkoaluetta"
+msgid "Search installed fonts"
+msgstr "Etsi asennetut kirjasimet"
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Seuraavat paketit poistetaan jotta j盲rjestelm盲si voidaan p盲ivitt盲盲:\n"
-"%s\n"
-"\n"
-"Haluatko varmasti poistaa n盲m盲 paketit?\n"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No"
-msgstr "Ei"
+msgid "IP address"
+msgstr "IP-osoite"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Yes"
-msgstr "Kyll盲"
+msgid "Choose the sizes"
+msgstr "Valitse koot"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
+"List of data corrupted:\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Olet valinnut seuraavat palvelimet: %s\n"
-"\n"
-"\n"
-"N盲m盲 palvelimet otetaan oletuksena k盲ytt枚枚n. Niiss盲 ei ole tunnettuja \n"
-"turvallisuusaukkoja, mutta sellaisia voi l枚yty盲 ajan mittaan. Mik盲li niin \n"
-"tapahtuu, sinun pit盲isi p盲ivitt盲盲 kyseiset palvelimet niin nopeasti kuin \n"
-"suinkin mahdollista.\n"
-"\n"
+"Lista vahingoittuneista tiedoista:\n"
"\n"
-"Haluatko todella asentaa n盲m盲 palvelimet?\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "J盲rjestelm盲n asetus"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "J盲rjestelm盲n asennus"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Ajan alas verkkoa"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "K盲ynnist盲n verkkoa"
-
-# mat
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Osiointi ep盲onnistui: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-Osiointivelho l枚ysi seuraavat ratkaisut:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "Ei ole tarpeeksi tilaa asentamiseen"
-
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-"Voit nyt osioida kiintolevysi %s\n"
-"Kun olet valmis, 盲l盲 unohda tallentaa asetuksia komennolla `w'"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "K盲yt盲 fdiski盲"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Mukautettu levyn osiointi"
+"Modeemisi ei ole tuettu t盲ss盲 j盲rjestelm盲ss盲.\n"
+"Katso osoitteesta http://www.linmodems.org/"
-# mat
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "KAIKKI olemassaolevat osiot ja niiss盲 oleva tieto tuhoutuu asemalta %s"
+msgid "Choose another partition"
+msgstr "Valitse toinen osio"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Sinulla on enemm盲n kuin yksi kiintolevy. Mille haluat asentaa Linuxin?"
+msgid "Current user"
+msgstr "Nykyinen k盲ytt盲j盲"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Tyhjenn盲 koko levy"
+msgid "Username"
+msgstr "K盲ytt盲j盲tunnus"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Poista Windows(TM)"
+msgid "Left \"Windows\" key"
+msgstr "Vasen \"Windows\" n盲pp盲in"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Ei ole FAT-osioita, joiden kokoa voisi muuttaa (tai ei ritt盲v盲sti vapaata "
-"tilaa)"
+msgid "dhcpd Server Configuration"
+msgstr "dhcpd palvelinasetukset"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-"Varmistaakseen tietojen yhten盲isyytt盲 osio(ide)n koon\n"
-"muuttamisen j盲lkeen, suoritetaan tiedostoj盲rjestelm盲n \n"
-"tarkistusta seuraavan kerran kun k盲ynnist盲t Windows(TM)."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-tiedostoj盲rjestelm盲n koon muuttaminen ep盲onnistui: %s"
+"K盲ytet盲盲n hakemistolle:\n"
+" ainoastaan hakemiston omistaja voi poistaa sen"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Muutan Windows-osion kokoa"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Muutan kokoa"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " Novell palvelimella \"%s\", tulostin \"%s\""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "partition %s"
-msgstr "osio %s"
+msgid "Remove a module"
+msgstr "Poista moduuli"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Kuinka paljon tilaa haluat s盲ilytt盲盲 Windowsilla"
+msgid "Password"
+msgstr "Salasana"
-#: ../../install_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"Arguments: (max, inactive=-1)\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
msgstr ""
-"VAROITUS!\n"
+"Parametrit: (max, inactive=-1)\n"
"\n"
-"DrakX aikoo nyt muuttaa Windows-osiosi kokoa. Ole varovainen:\n"
-"t盲m盲 toimenpide on vaarallinen. Jos et ole viel盲 tarkistanut \n"
-"Windows-osioitasi, sinun tulisi poistua asennuksesta, ajaa\n"
-"kiintolevyjen tarkistus Windowsissa (sek盲 mahdollisesti my枚s\n"
-"eheytt盲盲 levyt). Sen j盲lkeen voit aloittaa asennuksen uudelleen.\n"
-"Samalla suosittelen ottamaan varmuuskopiot t盲rkeist盲 tiedoista.\n"
-"Kun olet varma, paina Ok."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Windows-osiosi on liian pirstoutunut, k盲ynnist盲 koneesi uudelleen, mene "
-"Windowsiin ja aja \"Levyn eheytys\" ensin, ja aloita Mandrake Linuxin "
-"asennus uudestaan sen j盲lkeen."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Lasken Windows-osion kokoa"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT-j盲rjestelm盲n koon muuttaja ei osaa k盲sitell盲 osiotasi,\n"
-"seuraava virhe tapahtui: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Mink盲 osion kokoa haluat muuttaa?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "K盲yt盲 tyhj盲盲 tilaa Windows-osiolla"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ei ole FAT-osioita, jota voisi k盲ytt盲盲 loopback-tiedostona (tai ei "
-"ritt盲v盲sti vapaata tilaa)"
+"Asettaa salasanojen vanhenemisen \\fImax\\fP p盲iv盲盲n ja viiveen "
+"vaihtamiselle \\fIinactive\\fP."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Sivutusosion koko Mt: "
+msgid "Advanced Configuration"
+msgstr "Lis盲asetukset"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Juuriosion koko Mt: "
+msgid "Scanning on your HP multi-function device"
+msgstr "Tunnistetaan HP monitoimilaitettasi"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Valitse koot"
+msgid "Root"
+msgstr "Juuri"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Mille osiolle haluat laittaa Linux4Win:in?"
+msgid "Choose an existing RAID to add to"
+msgstr "Valitse olemassaoleva RAID johon lis盲t盲盲n"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "K盲yt盲 Windows-osiota loopback-tiedostona"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turkki (perinteinen \"Q\"-malli)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Ei ole olemassa olevaa osiota k盲ytett盲v盲ksi"
+msgid "Lilo message not found"
+msgstr "Lilo viesti ei l枚ydy"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "K盲yt盲 olemassa olevia osioita"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Automaattinen ytimen otsikkotiedoston korjaus /boot-hakemistossa "
+"tiedostolle\n"
+"/usr/include/linux/{autoconf,versio}.h"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
+msgid "if needed"
+msgstr "jos tarvitaan"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use free space"
-msgstr "K盲yt盲 tyhj盲盲 tilaa"
+msgid "Restore Failed..."
+msgstr "Palautus ep盲onnistui..."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sinulla pit盲盲 olla FAT-osio liitettyn盲 hakemistoon /boot/efi"
+msgid "/Autodetect _jazz drives"
+msgstr "/_Jazz asemien automaattitunnistus"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"Description:\n"
"\n"
-"Continue anyway?"
-msgstr ""
-"Sinulla ei ole sivutusosiota\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-"Jatka kuitenkin?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sinulla tulee olla juuriosio.\n"
-"T盲t盲 varten luo osio (tai klikkaa olemassaolevaa).\n"
-"Valitse sitten toiminto ``Liitospiste'' ja aseta se arvoon `/'"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Jokin osa laitteistoasi tarvitsee laitteistovalmistajan ajurit toimiakseen "
-"kunnolla.\n"
-"Voit l枚yt盲盲 lis盲tietoja edell盲 mainituista t盲盲lt盲: %s"
-
-#: ../../install_messages.pm:1
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"%s\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
"\n"
"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"Onnittelut, asennus on valmis.\n"
-"Poista k盲ynnistysmedia ja paina Enter k盲ynnist盲盲ksesi koneesi uudelleen.\n"
-"\n"
-"\n"
-"L枚yd盲t t盲h盲n Mandrake Linuxin versioon tarjollaolevat korjaukset ja\n"
-"korjattujen virheiden listan osoitteesta:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"J盲rjestelm盲n asettamisesta saat tietoja virallisen Linux Mandraken\n"
-"k盲ytt盲j盲oppaan j盲lkiasennuskappaleesta."
-
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-
-#: ../../install_messages.pm:1
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Kuvaus:\n"
"\n"
+" Drakbackup:a k盲ytet盲盲n j盲rjestelm盲si varmistamiseen.\n"
+" Asetuksen aikana voit valita: \n"
+"\t- J盲rjestelm盲tiedostoja, \n"
+"\t- K盲ytt盲jien tiedostoja, \n"
+"\t- Muita tiedostoja,\n"
+"\ttai Koko j盲rjestelm盲si... ja Muut (esim. Windows-osiot)\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+" Drakbackup sallii varmistaminen seuraaviin kohteisiin:\n"
+"\t- Kovalevy.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (sis盲lt盲盲 automaattik盲ynnistyksen,\n"
+"\t pelastuksen ja automaattiasennuksen.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Nauha.\n"
"\n"
-"Varoitus\n"
+" Drakbackup sallii sinun palauttaa j盲rjestelm盲si\n"
+" haluamasi hakemistoon.\n"
"\n"
-"Lue huolellisesti alla olevat ehdot. Jos et hyv盲ksy kaikkia\n"
-"ehtoja, sinulla ei ole oikeuksia asentaa seuraavaa CD-levy盲.\n"
-"Paina 'Kielt盲ydyn' jos haluat jatkaa asennusta k盲ytt盲m盲tt盲 n盲it盲 osia.\n"
+" Oletuksena kaikki varmistukset tallennetaan\n"
+" /var/lib/drakbackup hakemistoon\n"
"\n"
+" Asetustiedosto:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
"\n"
-"Jotkin seuraavalla CD-levyll盲 olevat komponentit eiv盲t ole GPL:n tai\n"
-"vastaavanlaisen lisenssin alaisia. Jokaisen t盲llaisen komponentin ehdot\n"
-"on m盲盲ritelty erikseen niiden omien lisenssien mukaan. Tutustu n盲ihin\n"
-"lisensseihin huolellisesti ennen kuin k盲yt盲t tai levit盲t n盲it盲 "
-"komponentteja\n"
-"eteenp盲in.\n"
-"T盲llaiset lisenssit kielt盲v盲t tavallisesti siirt盲misen, kopioimisen\n"
-"(lukuunottamatta varmuuskopioita), uudelleenlevityksen, "
-"k盲盲nteissuunnittelun \n"
-"bin盲盲rikoodin k盲盲nt盲misen tai muokkaamisen. Jokainen rike sopimusta \n"
-"vastaan p盲盲tt盲盲 oikeutesi kyseiseen lisenssiin. Ellei ole olemassa "
-"erityisi盲 \n"
-"ehtoja, jotka sallivat ohjelmiston asentamisen useaan koneeseen tai \n"
-"niiden k盲ytt盲mist盲 verkon yli, et saa my枚sk盲盲n tehd盲 niin. Jos et ole \n"
-"varma kaikista ehdoista, ota yhteys suoraan kyseisen komponentin \n"
-"tekij盲盲n tai jakelijaan. Yll盲 mainittujen komponenttien tai niiden \n"
-"dokumentaation saattaminen kolmannen osapuolen k盲siin on tavallisesti \n"
-"kielletty.\n"
+"Palautusaskel:\n"
+" \n"
+" Palautusvaiheen aikana Drakbackup poistaa alkuper盲iset\n"
+" hakemistosi, ja tarkistaa etteiv盲t varmistustiedostosi ole\n"
+" korruptoituneet. On suositeltavaa ett盲 suoritat viimeisen\n"
+" varmistuksen ennen palautuksen tekoa.\n"
"\n"
"\n"
-"Kaikki oikeudet seuraavan levyn komponentteihin kuuluvat niiden \n"
-"asianomaisille tekij枚ille ja ne on suojattu yksityisen omaisuuden ja \n"
-"ohjelmistojen tekij盲noikeuslakien mukaan.\n"
#: ../../install_messages.pm:1
#, c-format
@@ -3692,7 +824,7 @@ msgstr ""
"\n"
"\n"
"HUOM!! T盲m盲 on vapaasti suomennettu teksti Mandrake Linux \n"
-"jakelun lisenssiehdoista. Alkuper盲inen teksti l枚tyy viimeisen盲 \n"
+"jakelun lisenssiehdoista. Alkuper盲inen teksti l枚ytyy viimeisen盲 \n"
"t盲lt盲 sivulta!!\n"
"\n"
"K盲ytt枚j盲rjestelm盲盲n ja muihin Mandrake Linux jakelun eri osiin \n"
@@ -3700,7 +832,7 @@ msgstr ""
"sis盲lt盲盲, mutta ei rajoitu ainoastaan niihin, pakettien \n"
"yhdistelm盲t, menetelm盲t, s盲盲nn枚t ja dokumentaatioon jotka \n"
"kuuluvat k盲ytt枚j盲rjestelm盲盲n sek盲 Mandrake Linuxin jakeluun \n"
-"kuuluvat komponetit.\n"
+"kuuluvat komponentit.\n"
"\n"
"\n"
"\n"
@@ -3708,14 +840,14 @@ msgstr ""
"\n"
"\n"
"Ole hyv盲 ja lue t盲m盲 dokumentti huolellisesti. T盲m盲 dokumentti \n"
-"on Lisenssisopimus sinun ja MadrakeSoft S.A.:n v盲lill盲 ja koskee \n"
+"on Lisenssisopimus sinun ja MandrakeSoft S.A.:n v盲lill盲 ja koskee \n"
"Ohjelmistoa. Asentamalla, kopioimalla tai k盲ytt盲m盲ll盲 Ohjelmistoa \n"
"mill盲 tavalla tahansa, annat nimenomaisen hyv盲ksynn盲n ja suostut\n"
"mukautumaan t盲m盲n Lisenssin s盲盲nt枚ihin ja ehtoihin. \n"
"Jos et suostu johonkin osaan t盲st盲 Lisenssist盲, sinulla ei ole lupaa\n"
"asentaa, kopioida tai k盲ytt盲盲 t盲t盲 Ohjelmistoa. Mit盲盲n yrityst盲 asentaa,\n"
"kopioida tai k盲ytt盲盲 Ohjelmistoa tavalla, joka ei ole t盲m盲n Lisenssin\n"
-"s盲盲nt枚jen ja ehtojen mukainen, ei hyv盲ksyt盲 ja senkaltaistet yritykset\n"
+"s盲盲nt枚jen ja ehtojen mukainen, ei hyv盲ksyt盲 ja sen kaltaiset yritykset\n"
"p盲盲tt盲盲 oikeutesi t盲m盲n Lisenssin alla v盲litt枚m盲sti. Lisenssin p盲盲ttyess盲, \n"
"sinun pit盲盲 v盲litt枚m盲sti tuhota kaikki Ohjelmiston kopiot.\n"
"\n"
@@ -3728,7 +860,7 @@ msgstr ""
"sellaisenaan, ilman mit盲盲n takuita, voimassa olevan lain rajojen \n"
"sis盲ll盲. Sik盲li kuin takuuta ei voimassa olevan lain mukaan voi \n"
"kiist盲盲 tai rajoittaa, MandrakeSoft S.A. ei miss盲盲n nimess盲 ole \n"
-"vastuussa erikoisille, odottamattomille, v盲litt枚mille tai v盲lilliselle \n"
+"vastuussa erikoisille, odottamattomille, v盲litt枚mille tai v盲lillisille \n"
"vahingoille (sis盲lt盲en ilman rajoituksia vahingot menetetyst盲 \n"
"ty枚st盲, ty枚n keskeytyksest盲, taloudellisesta tappiosta, laillisista \n"
"kustannuksista ja sakoista johtuen tuomioistuimen p盲盲t枚ksest盲, \n"
@@ -3746,7 +878,7 @@ msgstr ""
"Sik盲li kuin takuuta ei voimassa olevan lain mukaan voi kiist盲盲 \n"
"tai rajoittaa, MandrakeSoft S.A. tai sen jakelijat sen ei miss盲盲n \n"
"nimess盲 ole vastuussa erikoisille, odottamattomille, v盲litt枚mille \n"
-"tai v盲lilliselle vahingoille (sis盲lt盲en ilman rajoituksia vahingot \n"
+"tai v盲lillisille vahingoille (sis盲lt盲en ilman rajoituksia vahingot \n"
"menetetyst盲 ty枚st盲, ty枚n keskeytyksest盲, taloudellisesta \n"
"tappiosta, laillisista kustannuksista ja sakoista johtuen tuomio-\n"
"istuimen p盲盲t枚ksest盲, tai mink盲 tahansa muun merkitt盲v盲n \n"
@@ -3773,7 +905,7 @@ msgstr ""
"levitt盲盲 eteenp盲in komponentit joita ne koskee. Ole hyv盲 ja lue \n"
"jokaisen komponentin lisenssin ehdot ja s盲盲nn枚t ennen kuin \n"
"k盲yt盲t sit盲. Jokainen kysymys koskien komponentin lisenssi盲 \n"
-"pit盲isi ohjata komponentin tekij盲lle MandrakeSoft:in sijasta. \n"
+"pit盲isi ohjata komponentin tekij盲lle MandrakeSoft:n sijasta. \n"
"MandrakeSoft S.A.:n tekemiin ohjelmiin sovelletaan GPL \n"
"Lisenssi盲. MandrakeSoft S.A.:n tekemiin dokumentaatioihin \n"
"sovelletaan erillist盲 lisenssi盲. Lue dokumentaatiota \n"
@@ -3935,5895 +1067,7522 @@ msgstr ""
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Siirryn vaiheeseen `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Apua"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "ei asetettu"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "M盲盲rittele"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Jatka kuitenkin?"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"edistymispalkin x-kordinaatti\n"
+"(vasen yl盲kulma)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Tapahtui virhe asennettaessa paketteja:"
+msgid "Current interface configuration"
+msgstr "Nykyiset liit盲nt盲asetukset"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Tapahtui virhe j盲rjestett盲ess盲 paketteja:"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - rivitulostus demoni"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
-"Vaihda CD-levy盲!\n"
"\n"
-"Aseta CD-levy nimelt盲盲n \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
-"Jos sinulla ei ole levy盲, paina Peruuta v盲ltt盲盲ksesi asennukset t盲lt盲 "
-"levylt盲."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Kielt盲ydy"
+"Jos sinulla on ISA-kortti, seuraavien arvojen pit盲isi olla oikeat.\n"
+"\n"
+"Jos sinulla on PCMCIA-kortti sinun t盲ytyy tiet盲盲 korttisi \"IRQ\" ja \"IO"
+"\".\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Accept"
-msgstr "Hyv盲ksy"
+msgid "Do not print any test page"
+msgstr "脛l盲 tulosta testisivua"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing package %s"
-msgstr "Asennan pakettia: %s"
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d pakettia"
+msgid "Force No APIC"
+msgstr "Pakota No APIC"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No details"
-msgstr "Ei yksityiskohtia"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkki盲 pitk盲)"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Details"
-msgstr "Yksityiskohdat"
+msgid "[keyboard]"
+msgstr "[n盲pp盲imist枚]"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Odota, valmistelen asennusta..."
+msgid "FTP proxy"
+msgstr "FTP-v盲lityspalvelin:"
-#: ../../install_steps_gtk.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Time remaining "
-msgstr "Aikaa j盲ljell盲 "
+msgid "Install List"
+msgstr "Asennuslistaus"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Estimating"
-msgstr "Arvioin aikaa"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Muuta\n"
+"palautushakemisto"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installing"
-msgstr "Asennan"
+msgid "Show only for the selected day"
+msgstr "N盲yt盲 vain valittu p盲iv盲"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Valitse asennettavat paketit"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ Yleiskuva\n"
+"\t\t\t \n"
+" - Luo Etherboot:a tukevia k盲ynnistyskuvia:\n"
+" \t\tYtimen k盲ynnist盲miseksi etherboot:in kautta pit盲盲 luoda "
+"erityinen kernel/initrd kuva\n"
+" \t\tmkinitrd-net tekee suuren osan t盲st盲 ty枚st盲 ja drakTermServ on "
+"ainoastaan graafinen k盲ytt枚liittym盲\n"
+" \t\tn盲iden kuvien hallintaan/r盲盲t盲l枚intiin.\n"
+"\n"
+" - Yll盲pid盲 /etc/dhcpd.conf:\n"
+" \t\tVerkkok盲ynnistyst盲 k盲ytt盲v盲t asiakkaat tarvitsevat oman dhcpd."
+"conf tietueen, joka m盲盲r盲盲 IP-osoitteen\n"
+" \t\tja verkkok盲ynnistyskuvan kyseiselle koneelle. drakTermServ "
+"auttaa n盲iden tietueiden luomisessa/poistamisessa.\n"
+"\t\t\t\n"
+" \t\t(PCI-kortit voivat j盲tt盲盲 kuvan asettamatta - etherboot pyyt盲盲 "
+"oikean kuvan. Sinun kannattaisi\n"
+" \t\tmy枚s harkita sit盲 ett盲 kun etherboot etsii kuvia, se odottaa "
+"nimi盲 kuten\n"
+" \t\tboot-3c59x.nbi, boot-3c59x.2.4.19-16mdk.nbi sijasta).\n"
+"\t\t\t \n"
+" \t\tTyypillinen dhcpd.conf tietue levytt枚m盲lle asiakkaalle voi "
+"olla:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tVaikka voit k盲ytt盲盲 IP-osoiteryhm盲盲 asiakaskoneelle r盲盲t盲l枚idyn "
+"tietueen sijasta,\n"
+"\t\t\tkiinteiden osoitteiden m盲盲ritysten k盲ytt枚盲 helpottaa ClusterNFS:n "
+"tarjoama\n"
+"\t\t\tasiakaskohtaisten asetustiedostojen k盲ytt枚.\n"
+"\t\t\t\n"
+"\t\t\tHuomaa: \"#type\" tietue on ainoastaan drakTermServ:n k盲yt枚ss盲. "
+"Asiakkaat voivat olla joko \"thin\"\n"
+"\t\t\ttai 'fat'. 'Thin' asiakkaat suorittavat suurimman osan ohjelmista "
+"palvelimella xdmcp kautta, kun 'fat' asiakkaat suorittavat\n"
+"\t\t\tsuurimman osan ohjelmista itse. Erikoinen inittab-tiedosto, /etc/"
+"inittab\\$\\$IP=client_ip\\$\\$ on\n"
+"\t\t\tluotu 'thin' asiakkaille. J盲rjestelm盲n asetustiedostot xdm-config, "
+"kdmrc ja gdm.conf muokataan\n"
+"\t\t\txdmcp:n k盲ytt盲miseksi, jos 'thin' asiakkaita k盲ytet盲盲n. Koska xdmcp:n "
+"k盲yt枚ss盲 on turvallisuusongelmia,\n"
+"\t\t\thosts.deny ja hosts.allow muokataan k盲yt枚n rajoittamiseen "
+"paikallisverkon aliverkolle.\n"
+"\t\t\t\n"
+"\t\t\tHuomaa: Sinun pit盲盲 pys盲ytt盲盲/k盲ynnist盲盲 palvelin asiakkaiden "
+"lis盲盲misen/muokkauksen j盲lkeen.\n"
+"\t\t\t\n"
+" - Yll盲pid盲 /etc/exports:\n"
+" \t\tClusternfs sallii juuritiedostoj盲rjestelm盲n jakoa levytt枚mille "
+"asiakkaille. drakTermServ\n"
+" \t\tasettaa oikean tietueen anonyymik盲yt枚n sallimiseksi "
+"juuritiedostoj盲rjestelm盲lle\n"
+" \t\tlevytt枚milt盲 asiakkailta.\n"
+"\n"
+" \t\tTyypillinen exports tietue clusternfs:ille:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home ALIVERKKO/MASKI(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tMiss盲 ALIVERKKO/MASKI vastaa verkkosi.\n"
+" \t\t\n"
+" - Yll盲pid盲 /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tJotta levytt枚mien asiakkaiden k盲ytt盲j盲t pystyv盲t kirjautumaan "
+"t盲h盲n j盲rjestelm盲盲n, niiden tietue\n"
+" \t\t/etc/shadow tiedostossa pit盲盲 kopioida /etc/shadow\\$\\$CLIENTS\\"
+"$\\$. drakTermServ auttaa\n"
+" \t\tt盲ss盲 toimenpiteess盲 lis盲盲m盲ll盲 tai poistamalla k盲ytt盲ji盲 t盲st盲 "
+"tiedostosta.\n"
+"\n"
+" - Asiakaskohtainen /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tClusternfs:盲n kautta jokaisella levytt枚m盲ll盲 asiakkaalla voi "
+"olla oma r盲盲t盲l枚ity asetustiedosto\n"
+" \t\tpalvelimen juuritiedostoj盲rjestelm盲ss盲. Tulevaisuudessa "
+"drakTermServ auttaa n盲iden tiedostojen\n"
+" \t\tluonnissa.\n"
+"\n"
+" - Asiakaskohtaiset j盲rjestelm盲n asetustiedostot:\n"
+" \t\tClusternfs:盲n kautta, jokaisella levytt枚m盲ll盲 asiakkaalla voi "
+"olla omat r盲盲t盲l枚idyt asetustiedostot\n"
+" \t\tpalvelimen juuritiedostoj盲rjestelm盲ss盲. Tulevaisuudessa "
+"drakTermServ auttaa n盲iden tiedostojen\n"
+" \t\tluonnissa,\n"
+" \t\tkuten /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard asiakaskohtaisena\n"
+" \t\ttiedostoina.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ asettaa t盲m盲n tiedoston toimimaan yhteisty枚ss盲 "
+"mkinitrd-net:ll盲 luotujen\n"
+" \t\tkuvien kanssa ja tietueet /etc/dhcpd.conf tiedostossa jakamaan "
+"k盲ynnistysluvan jokaiselle levytt枚m盲lle\n"
+" \t\tasiakkaalle.\n"
+"\n"
+" \t\tTyypillinen tftp asetustiedosto n盲ytt盲盲 t盲lt盲:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tMuutokset t盲盲ll盲 verrattuna vakioasennukseen on 'disable' lipun "
+"asettaminen\n"
+" \t\t'no' tilaan ja hakemiston muuttaminen /var/lib/tftpboot, johon "
+"mkinitrd-net\n"
+" \t\ttallentaa kuvat.\n"
+"\n"
+" - Luo etherboot levykkeet/CD:t:\n"
+" \t\tLevytt枚m盲t asiakaskoneet tarvitsevat joko ROM-kuvat "
+"verkkokortissa, tai k盲ynnistyslevykkeen\n"
+" \t\ttai CD:n k盲ynnist盲m盲盲n k盲ynnistysjakson. drakTermServ auttaa "
+"n盲iden kuvien luonnissa,\n"
+" \t\tjotka perustuvat asiakaskoneiden verkkokorttiin.\n"
+" \t\t\n"
+" \t\tPerusesimerkki k盲ynnistyslevykkeen luominen 3Com 3c509 "
+"verkkokortille:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
+"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-# Asennuksen sivuvalikko
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "Minimaalinen asennus"
+msgid "512 kB"
+msgstr "512 kt"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Updating package selection"
-msgstr "P盲ivit盲n pakettien valintaa"
+msgid "Logs"
+msgstr "Lokit"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Lataa/Tallenna levykkeelle"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Huomio: rinnakkaisportteja ei voida tunnistaa automaattisesti)"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Edellinen"
+msgid "<control>N"
+msgstr "<control>U"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Install"
-msgstr "Asenna"
+msgid "What kind of card do you have?"
+msgstr "Millainen kortti sinulla on?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "N盲yt盲 automaattisesti valitut paketit"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Et voi poistaa t盲m盲n paketin valintaa. Paketti pit盲盲 p盲ivitt盲盲."
+msgid "Security"
+msgstr "Tietoturva"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"T盲m盲 paketti tulee p盲ivitt盲盲.\n"
-"Oletko varma ett盲 haluat poistaa valinnan?"
+"Voit k盲ytt盲盲 my枚s graafista k盲ytt枚liittym盲盲 \"xpdq\" optioiden asettamiseen "
+"ja tulostust枚iden hallintaan.\n"
+"\n"
+"Jos k盲yt盲t KDE ty枚p枚yt盲ymp盲rist枚盲 sinulla on \"paniikkipainike\" kuvake "
+"ty枚p枚yd盲ll盲 \"PYS脛YT脛 tulostus!\", joka pys盲ytt盲盲 kaikki tulostusty枚t heti "
+"kun painat sit盲. T盲m盲 on hy枚dyllist盲 esimerkiksi kun paperi on tukossa.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Et voi poistaa t盲m盲n paketin valintaa. Se on jo asennettu"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "T盲m盲 on pakollinen paketti, sit盲 ei voida poistaa valinnoista"
+msgid "Unknown"
+msgstr "Tuntematon"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Et voi valita/poistaa t盲t盲 pakettia"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "T盲m盲 palvelin on jo listassa, eik盲 sit盲 voida lis盲t盲 uudestaan.\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Seuraavat paketit poistetaan"
+msgid "Network Configuration"
+msgstr "Verkon asetukset"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Seuraavat paketit asennetaan"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"Et voi asentaa t盲t盲 pakettia, koska levyll盲 ei ole tarpeeksi tilaa sen "
-"asentamiseksi"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Importance: %s\n"
-msgstr "T盲rkeys: %s\n"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Koko: %d kt\n"
+"Muun maailman k盲ytt盲m盲 protokolla \n"
+"Ei D-kanavaa (vuokra-linjat)"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
+msgid "Option %s must be a number!"
+msgstr "Valitsimen %s pit盲盲 olla luku!"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
+msgid "Notice"
+msgstr "Huomautus"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Viallinen paketti"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 p盲ivitt盲iset turvallisuustarkistukset."
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Other"
-msgstr "Muut"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 crontab ja at k盲ytt盲jille. Laita hyv盲ksytyt "
+"k盲ytt盲j盲t tiedostoihin '/etc/cron.allow' ja '/etc/at.allow'. (katso man at"
+"(1) ja crontab(1))."
-# mat
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Koko yhteens盲: %d / %d Mt"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Et ole asettanut X-palvelinta. Oletko varma ett盲 haluat tehd盲 t盲m盲n?"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Seuraava ->"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "Yksitt盲isten pakettien valinta"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package Group Selection"
-msgstr "Pakettiryhmien valinta"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
msgstr ""
-"J盲rjestelm盲si resurssit ovat lopussa. Voit kohdata ongelmia Mandrake Linuxia "
-"asentaessasi.\n"
-"Jos n盲in tapahtuu, voit kokeilla tekstipohjaista asennusta. Tehd盲ksesi niin "
-"paina `F1' kun\n"
-"k盲ynnist盲t asennusohjelmaa CD-ROM:lta. T盲m盲n j盲lkeen kirjoita `text'."
+"Tulostimen asetukset m盲盲ritet盲盲n automaattisesti. Jos tulostintasi ei "
+"tunnistettu oikein, tai jos haluat r盲盲t盲l枚idyt tulostinasetukset valitse "
+"\"Manuaalinen asettaminen\"."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Tallenna pakettien valinta"
+msgid "What type of partitioning?"
+msgstr "Mink盲 tyyppinen osiointi?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automated"
-msgstr "Automaattinen"
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+"tiedostolista l盲hetetty FTP:ll盲: %s\n"
+" "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Replay"
-msgstr "Toista"
+msgid "Interface"
+msgstr "Liit盲nt盲"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"You may prefer to replay the installation.\n"
msgstr ""
-"Automaattinen asennus voi olla t盲ysin automatisoitu,\n"
-"jos niin halutaan. Siin盲 tapauksessa asennus t盲ytt盲盲\n"
-"koko kiintolevyn! (tarkoitettu toisen koneen asentamiseksi),\n"
+"optioiden kuvaus:\n"
+"\n"
+" - Varmista j盲rjestelm盲tiedostoja:\n"
+"\n"
+"\tT盲m盲 optio sallii sinun varmistamaan /etc hakemistosi,\n"
+"\tjoka sis盲lt盲盲 kaikki asetustiedostot. Ole varovainen\n"
+"\tpalautuksen aikana ettei seuraavia tiedostoja ylikirjoiteta:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Varmista k盲ytt盲jien tiedostot:\n"
+"\n"
+"\tT盲m盲 optio sallii sinun valitsemaan kaikki k盲ytt盲j盲t\n"
+"\tjoiden tiedostoja haluat varmistaa.\n"
+"\tS盲盲st盲盲ksesi levytilaa, ehdotamme ettet sis盲ll盲\n"
+"\tnettiselaimen v盲limuistitiedostoja.\n"
+"\n"
+" - Varmista muita tiedostoja:\n"
+"\n"
+"\tT盲m盲 optio sallii sinua lis盲t盲 varmistettavaa tietoa.\n"
+"\tT盲t盲 optiota et voi t盲ll盲 hetkell盲 k盲ytt盲盲 asteittaisen \n"
+"\tvarmistuksen kanssa.\n"
+"\n"
+" - Asteittaiset varmistukset:\n"
+"\n"
+"\tAsteittainen varmistus on tehokkain tapa varmistaa.\n"
+"\tT盲m盲 optio sallii sinua varmistaa ensin kaikki tietosi,\n"
+"\tsen j盲lkeen ainoastaan muuttuneet tiedostot.\n"
+"\tT盲ll盲 tavalla voit palauttaa tiedot haluamasi p盲iv盲m盲盲r盲n\n"
+"\tmukaan.\n"
+"\tJos et valitse t盲t盲 optiota kaikki vanhat varmistukset\n"
+"\tpoistetaan ennen uuden tekoa. \n"
+"\n"
"\n"
-"Ehk盲 haluat mieluummin toistaa asennuksen.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Luo automaattinen asennuslevyke"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "K盲ynnist盲 uudelleen"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Do you really want to quit now?"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Joitain vaiheita ei ole saatettu loppuun.\n"
+"Parametrit: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Haluatko todella lopettaa?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Valmistelen automaattiasennuslevykett盲..."
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 syslog:n raportin ohjaus konsoliin 12.\n"
+"\\fIexpr\\fP m盲盲r盲盲 mit盲 pit盲盲 kirjoittaa lokiin (katso syslog.conf(5) \n"
+"saadaksesi lis盲tietoja), ja dev mihin laitteeseen raportoidaan."
-# mat
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+# Asennuksen sivuvalikko
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Aseta tyhj盲 levyke levykeasemaan %s"
+msgid "comma separated strings"
+msgstr "pilkulla erotettuja merkkijonoja"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sinun pit盲盲 ehk盲 muuttaa Open Firmware -k盲ynnistyslaitetta\n"
-"aktivoidaksesi j盲rjestelm盲lataajan. Jos et n盲e j盲rjeslelm盲lataajaa\n"
-"k盲ynnist盲ess盲si konettasi uudelleen, Paina Command-Option-O-F\n"
-"k盲ynnistyksen yhteydess盲 ja kirjoita:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"kirjoita sitten: shut-down\n"
-"Seuraavalla k盲ynnistyskerralla sinun pit盲isi n盲hd盲 k盲ynnistyslataajan\n"
-"komentokehoite."
+msgid "These are the machines from which the scanners should be used:"
+msgstr "N盲m盲 ovat koneet joista kuvanlukija(t) pit盲isi k盲ytt盲盲: "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "J盲rjestelm盲lataajan asennus ep盲onnistui. Seuraava virhe tapahtui:"
+msgid "Messages"
+msgstr "Viestit"
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Asennan k盲ytt枚j盲rjestelm盲n lataajaa"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Tuntematon|CPH06X (bt878) [monta valmistajaa]"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Virhe asennettaessa aboot:a,\n"
-"yrit盲nk枚 pakkoasennusta vaikka se tuhoaa ensimm盲isen osion?"
+msgid "POP and IMAP Server"
+msgstr "POP- ja IMAP-palvelin"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Haluatko k盲ytt盲盲 aboot:ia?"
+msgid "Mexico"
+msgstr "Meksiko"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-msgstr ""
-"Sinulla on vanhanaikainen tai tuntematon tietokone,\n"
-"joten yaboot j盲rjestelm盲nlataaja ei toimi koneessasi.\n"
-"Asennus jatkuu, mutta sinun t盲ytyy k盲ytt盲盲 BootX:盲盲\n"
-"koneesi k盲ynnist盲miseen"
+msgid "Model stepping"
+msgstr "Malli askel"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Valmistelen k盲ytt枚j盲rjestelm盲n lataajaa..."
+msgid "Rwanda"
+msgstr "Ruanda"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Verkkoalueen p盲盲k盲ytt盲j盲n salasana"
+msgid "Do you have any %s interfaces?"
+msgstr "Onko koneessa %s liitynt盲盲?"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Verkkoalueen p盲盲k盲ytt盲j盲n nimi"
+msgid "Switzerland"
+msgstr "Sveitsi"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Domain"
-msgstr "Windows verkkoalue"
+msgid "Brunei Darussalam"
+msgstr "Brunei"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Tunnistus: Windows verkkoalue"
+msgid "Remote lpd Printer Options"
+msgstr "Lpd-et盲tulostimen parametrit"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Jotta t盲m盲 toimisi W2K PDC kanssa, sinun pit盲盲 todenn盲k枚isesti pyyt盲盲 sen "
-"j盲rjestelm盲valvojaa suorittamaan: C:\\>net localgroup \"Pre-Windows 2000 "
-"Compatible Access\" everyone /add ja k盲ynnist盲m盲盲n palvelin uudelleen.\n"
-"Tarvitset my枚s verkkoalueen yll盲pit盲j盲n tunnusta liitt盲盲ksesi koneesi Windows"
-"(TM) verkkoalueeseen.\n"
-"Jos verkkoa ei ole viel盲 asetettu, DrakX yritt盲盲 liitty盲 verkkoalueeseen kun "
-"verkon asetusvaihe on tehty.\n"
-"Jos t盲m盲 asetus ep盲onnistuu jostain syyst盲 ja verkkoalueen tunnistus ei "
-"toimi, suorita: 'smbpasswd -j VERKKOALUE -U K脛YTT脛J脛%%SALASANA' k盲ytt盲en "
-"Windows verkkoaluetta ja verkkoalueen yll盲pit盲j盲n tunnusta/salasanaa "
-"k盲ynnistyksen j盲lkeen.\n"
-"Komento 'wbinfo -t' tarkistaa jos tunnistuksen salaisuuksia ovat kunnossa."
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
+"GNU/Linux on monen k盲ytt盲j盲n j盲rjestelm盲 ja t盲m盲 tarkoittaa ett盲\n"
+"jokainen k盲ytt盲j盲 voi pit盲盲 omat asetukset, omat tiedostot jne. Voit\n"
+"lukea ``Starter Guide'':a saadaksesi lis盲tietoa t盲st盲. Mutta \"root\"-\n"
+"k盲ytt盲j盲盲n, joka on j盲rjestelm盲n yll盲pit盲j盲, verrattuna k盲ytt盲j盲t, joita\n"
+"lis盲盲t t盲盲ll盲, eiv盲t pysty muuttamaan mit盲盲n muuta paitsi omia\n"
+"tiedostojaan ja asetuksiaan. T盲ll盲 tavalla suojataan j盲rjestelm盲盲\n"
+"erehdyksilt盲 tai tahallisilta muutoksilta, jotka vaikuttavat j盲rjestelm盲盲n.\n"
+"Sinun pit盲盲 luoda ainakin yksi tavallinen k盲ytt盲j盲 itsellesi. Se on tili\n"
+"jota sinun kannattaa k盲ytt盲盲 jokap盲iv盲isess盲 ty枚ss盲si. Vaikkakin on\n"
+"k盲tev盲mp盲盲 kirjoittautua sis盲盲n \"root\"-tunnuksella, se on my枚s paljon\n"
+"vaarallisempaa! Pienikin virhe voi tarkoittaa ettei j盲rjestelm盲si toimi\n"
+"en盲盲. Jos teet vakavan virheen tavallisena k盲ytt盲j盲n盲, voit mahdollisesti\n"
+"menett盲盲 jotain tietoja, mutta et koko j盲rjestelm盲盲.\n"
+"\n"
+"Ensin sinun pit盲盲 antaa oikea nimesi. T盲m盲 ei ole pakollista -- voithan\n"
+"kirjoittaa mit盲 tahansa. DrakX kopioi ensimm盲isen kirjoittamasi sanan\n"
+"kentt盲盲n \"%s\". T盲m盲 on se nimi jolla kyseinen k盲ytt盲j盲 kirjoittautuu\n"
+"j盲rjestelm盲盲n. Voit muuttaa sit盲 halutessasi. Sinun pit盲盲 my枚s sy枚tt盲盲\n"
+"salasana. Tavallisen k盲ytt盲j盲n salasana ei ole niin kriittinen kuin\n"
+"\"root\"-tunnus turvallisuusn盲k枚kulmasta, mutta t盲m盲 ei ole syy\n"
+"tietoturvan laiminly枚miseen: Onhan kysymys tiedostojesi turvasta.\n"
+"\n"
+"Kun painat \"%s\", voit lis盲t盲 muita k盲ytt盲ji盲. Lis盲盲 k盲ytt盲j盲\n"
+"jokaiselle henkil枚lle jonka on tarkoitus k盲ytt盲盲 t盲t盲 tietokonetta.\n"
+"Kun olet lis盲nnyt kaikki haluamasi k盲ytt盲j盲t, valitse \"%s\".\n"
+"\n"
+"Jos painat \"%s\" painiketta voit muuttaa vakio\n"
+"\"komentotulkin\" kyseiselle k盲ytt盲j盲lle (vakiona bash).\n"
+"\n"
+"Kun olet lis盲nnyt kaikki k盲ytt盲j盲t, sinua pyydet盲盲n valitsemaan k盲ytt盲j盲\n"
+"joka voi kirjoittautua automaattisesti j盲rjestelm盲盲n kun kone k盲ynnistyy.\n"
+"Jos olet kiinnostunut t盲st盲 ominaisuudesta (etk盲 paljon piittaa\n"
+"paikallisesta tietoturvasta), valitse haluttu k盲ytt盲j盲 ja "
+"ikkunointij盲rjestelm盲,\n"
+"ja paina \"%s\". Jos et ole kiinnostunut t盲st盲 ominaisuudesta,\n"
+"poista valinta \"%s\""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NIS Server"
-msgstr "NIS-palvelin"
+msgid "Configure Internet Access..."
+msgstr "Aseta Internetyhteys..."
-#: ../../install_steps_interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "NIS-verkkoalue"
+msgid "Norway"
+msgstr "Norja"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "Tunnistus: NIS"
+msgid "Danish"
+msgstr "Tanska"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Asettaa k盲ynnistyksess盲 numlock-n盲pp盲inlukitsimen p盲盲lle\n"
+"sek盲 konsolille ett盲 XFree:lle."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-palvelin"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Anna koneen IP-asetukset. Kukin kohta tulee sy枚tt盲盲 IP-osoitteena,\n"
+"pisteill盲 eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP perus-dn"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Mandrake Linuxin asennus koostuu useasta CD-ROM-levyst盲. DrakX\n"
+"tiet盲盲, onko valittu paketti toisella CD:ll盲 ja osaa sy枚tt盲盲 nykyisen levyn\n"
+"ulos ja pyyt盲盲 sinua asettamaan oikea levy tarvittaessa."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Tunnistus: LDAP"
+msgid "Processors"
+msgstr "Prosessorit"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Bulgaria"
+msgstr "Bulgaria"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Local files"
-msgstr "Paikalliset tiedostot"
+msgid "No NIC selected!"
+msgstr "Verkkokorttia ei valittu!"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Tunnistustapa"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard ja Jan Mayen"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkki盲 pitk盲)"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No password"
-msgstr "Ei salasanaa"
+"Ongelmia asettamisen aikana.\n"
+"Testaa yhteytesi net_monitor- tai mcc-ty枚kalulla. Jos yhteytesi ei toimi, "
+"voit k盲ynnist盲盲 asetusty枚kalun uudelleen"
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Yll盲pit盲j盲n (\"root\") salasana"
+msgid "partition %s is now known as %s"
+msgstr "osio %s tunnetaan nyt nimell盲 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Et ole asettanut X-palvelinta. Oletko varma ett盲 haluat tehd盲 t盲m盲n?"
+msgid "Backup Other files..."
+msgstr "Varmuuskopioi muut tiedostot..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Palvelut: %d aktivoitu %d:st盲 rekister枚idyst盲"
+msgid "SMB server IP"
+msgstr "SMB-palvelimen IP"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Services"
-msgstr "Palvelut"
+msgid "Congo (Kinshasa)"
+msgstr "Kongo (Kinshasa)"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "System"
-msgstr "J盲rjestelm盲"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Levyn %s osiotaulu kirjoitetaan levylle!"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%s on %s"
-msgstr "%s kohteessa %s"
+msgid "Installing HPOJ package..."
+msgstr "Asennan HPOJ paketteja..."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "K盲ynnistyslataaja"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Mukautetulla k盲ynnistyslevykkeell盲 voit k盲ynnist盲盲 j盲rjestelm盲n ilman\n"
+"tavanomaisen k盲ytt枚j盲rjestelm盲lataajan apua. T盲st盲 on hy枚ty盲, jos et halua\n"
+"asentaa LILO:a (tai grubia) j盲rjestelm盲盲si, toinen k盲ytt枚j盲rjestelm盲 "
+"poistaa\n"
+"LILO:n, tai LILO ei toimi laitteistossasi. Mukautettua k盲ynnistyslevykett盲 "
+"voidaan\n"
+"k盲ytt盲盲 my枚s Mandraken pelastuskuvan kanssa, jolloin vakavista\n"
+"j盲rjestelm盲n virhetilanteista on helpompi toipua.\n"
+"Haluatko luoda k盲ynnistyslevykkeen j盲rjestelm盲盲si?\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot"
-msgstr "K盲ynnistys"
+msgid ", USB printer \\#%s"
+msgstr ", USB tulostin \\#%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "disabled"
-msgstr "ei k盲yt枚ss盲"
+msgid "Latvian"
+msgstr "Latvia"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "activated"
-msgstr "aktivoitu"
+msgid "monthly"
+msgstr "kuukausittain"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Firewall"
-msgstr "Palomuuri"
+msgid "Module name"
+msgstr "Moduulin nimi"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Security"
-msgstr "Tietoturva"
+msgid "Start at boot"
+msgstr "K盲ynnist盲 koneen k盲ynnistyksen yhteydess盲"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Security Level"
-msgstr "Turvataso:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "K盲yt盲 kasvavia varmuuskopioita (盲l盲 korvaa vanhoja varmuuskopioita)"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Network"
-msgstr "Verkko"
+msgid "First sector of drive (MBR)"
+msgstr "Levyn ensimm盲inen sektori (MBR)"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "Verkko & Internet"
+msgid "Joystick"
+msgstr "Peliohjain"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "Graafinen k盲ytt枚liittym盲"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Laitteisto"
+msgid "Use Unicode by default"
+msgstr "K盲yt盲 Unicodea oletuksena"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "TV card"
-msgstr "TV-kortti"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "GNU/Linux ytimen moduuli joka k盲sittelee kyseist盲 laitetta"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Yht盲k盲盲n 盲盲nikorttia ei l枚ydetty. Kokeile \"harddrake\" asennuksen j盲lkeen"
+msgid "Trying to rescue partition table"
+msgstr "Yrit盲n osiotaulun pelastusta"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Suorita \"sndconfig\" asennuksen j盲lkeen asettaaksesi 盲盲nikorttisi."
+msgid "Option %s must be an integer number!"
+msgstr "Valitsimen %s pit盲盲 olla kokonaisluku!"
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Onko sinulla ISA-v盲yl盲盲n liitett盲v盲 盲盲nikortti?"
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
+"Kohdat, jotka sinun pit盲盲 t盲ytt盲盲:\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Sound card"
-msgstr "脛盲nikortti"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "J盲rjestelm盲n p盲ivityst盲 ei voida aloittaa!\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
+msgid "Name: "
+msgstr "Nimi: "
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Ei tulostinta"
+msgid "16 million colors (24 bits)"
+msgstr "16 miljoonaa v盲ri盲 (24 bitti盲)"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+# Asennuksen sivuvalikko
+#: ../../any.pm:1
#, c-format
-msgid "Printer"
-msgstr "Tulostin"
+msgid "Allow all users"
+msgstr "Salli kaikille k盲ytt盲jille"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mouse"
-msgstr "Hiiri"
+msgid "The official MandrakeSoft Store"
+msgstr "Virallinen MandrakeSoft kauppa"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Aikavy枚hyke"
+msgid "Resizing"
+msgstr "Muutan kokoa"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "N盲pp盲imist枚"
+msgid "Cable connection"
+msgstr "Kaapeliyhteys"
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Summary"
-msgstr "Yhteenveto"
+msgid "User"
+msgstr "K盲ytt盲j盲"
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "NTP-palvelin"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"En voi lukea laitteen %s osiotaulukkoa. Se on liian korruptoitunut :(.\n"
+"Voin yritt盲盲 jatkaa poistamalla kaikki virheelliset osiot (KAIKKI TIEDOT\n"
+"tuhotaan). Toinen vaihtoehto on, ettei sallita DrakX:盲盲 muokata "
+"osiotaulukkoa.\n"
+"(virhe: %s)\n"
+"\n"
+"Hyv盲ksytk枚 ett盲 kaikki virheelliset osiot poistetaan?\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automaattinen kellon synkronisointi (k盲ytt盲en NTP:t盲)"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+"Tee uusi varmuuskopio ennen palauttamista (vain kasvavilla varmuuskopioilla)"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Laitteistokello asetettu GMT-aikaan"
+msgid "Printer on parallel port \\#%s"
+msgstr "Tulostin rinnakkaisportissa \\#%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Mik盲 on j盲rjestelm盲si aikavy枚hyke?"
+msgid "Name"
+msgstr "Nimi"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "Haluako kokeilla uudelleen?"
+msgid "mkraid failed"
+msgstr "mkraid ep盲onnistui"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "En saa yhteytt盲 peilipalvelimeen %s"
+msgid "Button 3 Emulation"
+msgstr "3. n盲pp盲imen emulaatio"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Yhdist盲n peilipalvelimeen hakeakseni uusimman pakettilistan..."
+msgid "Sending files..."
+msgstr "L盲het盲n tiedostoja..."
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valitse peilipalvelin josta paketit haetaan"
+msgid "Israeli (Phonetic)"
+msgstr "Israel (Foneettinen)"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Otan yhteytt盲 Mandrake Linuxin sivustolle saadakseni listan olemassaolevista "
-"peilipalvelimista..."
+msgid "access to rpm tools"
+msgstr "oikeudet RPM-ty枚kaluihin"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea p盲ivitetyt paketit. N盲m盲 paketit\n"
-"on julkaistu t盲m盲n jakelun julkaisun j盲lkeen. Ne voivat sis盲lt盲盲\n"
-"tietoturva- tai virhekorjauksia.\n"
-"\n"
-"Hakeaksesi n盲m盲 paketit, sinulla pit盲盲 olla toimiva Internetyhteys.\n"
-"\n"
-"Haluatko hakea ja asentaa p盲ivitykset?"
+msgid "edit"
+msgstr "muokkaa"
-# mat
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Aseta moduulien p盲ivityslevyke asemaan %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Sinun t盲ytyy valita tai sy枚tt盲盲 tulostinlaite!"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Aseta k盲ytt盲m盲si k盲ynnistyslevyke asemaan %s"
+msgid "Permission problem accessing CD."
+msgstr "Ongelma CD-k盲yt枚n oikeuksien kanssa."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Asennuksen j盲lkeiset toiminnot"
+msgid "Phone number"
+msgstr "Puhelinnumero"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Asennan pakettia: %s\n"
-"%d%%"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Virhe: Ajuri \"%s\" 盲盲nikortillesi ei ole listattu"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Valmistelen asennusta"
+msgid "Printer name, description, location"
+msgstr "Tulostimen nimi, kuvaus, paikka"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM nimelt盲盲n \"%s\""
+msgid "USA (broadcast)"
+msgstr "Yhdysvallat (bcast)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Please choose the\n"
+"media for backup."
msgstr ""
-"Jos sinulla on kaikki CD-levyt allaolevalta listalta, paina Ok.\n"
-"Jos sinulla ei ole mit盲盲n levyist盲, paina Peruuta.\n"
-"Jos jotkut levyist盲 puuttuvat, poista niiden valinnat, ja paina OK."
+"Valitse varmuuskopiointiin\n"
+"k盲ytett盲v盲 media."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "All"
-msgstr "Kaikki"
+msgid "Use Xinerama extension"
+msgstr "K盲yt盲 Xinerama-laajennusta"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "V盲himm盲isasennus (erityisesti ei urpmia)"
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Perusdokumentaation kanssa (suositeltu!)"
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"mkbootdisk:盲 ei voitu sulkea oikein: \n"
+" %s \n"
+" %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "With X"
-msgstr "X-palvelimella"
+msgid "West Europe"
+msgstr "L盲nsi-Eurooppa"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Et ole valinnut yht盲k盲盲n pakettiryhm盲盲.\n"
-"Valitse haluamasti minimaalinen asennus"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Type of install"
-msgstr "Asennuksen tyyppi"
+"[OPTIOT] [OHJELMAN_NIMI]\n"
+"\n"
+"OPTIOT:\n"
+" --help - tulosta t盲m盲 viesti.\n"
+" --report - ohjelman pit盲isi olla yksi Mandraken ty枚kaluista\n"
+" --incident - ohjelman pit盲isi olla yksi Mandraken ty枚kaluista"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Valittu koko on suurempi kuin k盲ytett盲viss盲 oleva levytila"
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 versio %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Aseta levyke, jossa on pakettien valinta"
+msgid "Copying %s"
+msgstr "Kopioidaan %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Ladataan levykkeelt盲"
+msgid "Choose color"
+msgstr "Valitse v盲ri"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Pakettien valinta"
+msgid "Dominican Republic"
+msgstr "Dominikaaninen tasavalta"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Tallenna levykkeelle"
+msgid "Swaziland"
+msgstr "Swazimaa"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Lataa levykkeelt盲"
+msgid "Set-UID"
+msgstr "Aseta-UID"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Lataa tai tallenna pakettien valinta levykkeelle.\n"
-"Muoto on sama kuin auto_install-toiminnon luomilla levykkeill盲."
+msgid "Please check if you are using CDRW media"
+msgstr "Valitse t盲m盲 jos k盲yt盲t CD-RW-mediaa"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"J盲rjestelm盲ss盲si ei ole riitt盲v盲sti tilaa asennukseen tai p盲ivitykseen (%d > "
-"%d)"
+"Valitse kiintolevy, jonka haluat tyhjent盲盲 uudelle Mandrake Linux\n"
+"-asennusosiolle. Ole varovainen, koska kaikki asemalla oleva tieto\n"
+"tuhoutuu eik盲 ole en盲盲 palautettavissa!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Etsin saatavilla olevia paketteja..."
+msgid " on parallel port \\#%s"
+msgstr " rinnakkaisliit盲nn盲ss盲 \\#%s"
-#: ../../install_steps_interactive.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Etsin p盲ivitett盲vi盲 paketteja..."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "K~^Dyt~^D %c- ja %c-n~^Dpp~^Dimi~^D valitaksesi korostetun tietueen"
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Etsin jo asennettuja paketteja..."
+msgid "Generic 2 Button Mouse"
+msgstr "Yleinen 2-n盲pp盲iminen hiiri"
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Etsin saatavilla olevia paketteja, ja rakennan rpm-tietokannan uudelleen..."
+msgid "Remove the logical volumes first\n"
+msgstr "Poista loogiset osiot ensin\n"
-#: ../../install_steps_interactive.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Sivutustilaa ei ole riitt盲v盲sti, suurenna sit盲"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Korostettu tietue k~^Dynnistet~^D~^Dn automaattisesti %d sekunnissa."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Tiedostoj盲rjestelm盲n %s tarkistus ep盲onnistui. Haluatko korjata virheet?\n"
-"(huomioi: voit menett盲盲 tietoja)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Tarkista vialliset lohkot?"
+"En voi kirjoittaa /etc/sysconfig/bootsplash.\n"
+"Tiedostoa ei l枚ydy."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Valitse alustettavat osiot"
+msgid "Internet access"
+msgstr "Internetyhteys"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Sinun tulee k盲ynnist盲盲 j盲rjestelm盲 uudelleen jotta muutokset tulevat voimaan"
+"tekstiruudun y-koordinaatti\n"
+"m盲盲r盲 merkeiss盲"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Ei vapaata tilaa 1 Mt:n k盲ynnistyslohkoa varten! Asennusta jatketaan, mutta "
-"k盲ynnist盲盲ksesi j盲rjestelm盲n sinun pit盲盲 luoda k盲ynnistyslohko-osio "
-"DiskDrake:ssa."
+"Saadaksesi listan nykyisen tulostimen parametreista klikkaa \"Tulostuksen "
+"valintalista\"-painiketta."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose the mount points"
-msgstr "Valitse liitospisteet"
+msgid "Enabling servers..."
+msgstr "Otan palvelut k盲ytt枚枚n.."
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Tarkistan osioita l枚yt盲盲kseni liitospisteet"
+msgid "Printing test page(s)..."
+msgstr "Tulostan testisivu(ja)..."
-#: ../../install_steps_interactive.pm:1
+# mat
+#: ../../fsedit.pm:1
#, c-format
-msgid "No partition available"
-msgstr "ei vapaita osioita"
+msgid "There is already a partition with mount point %s\n"
+msgstr "On jo olemassa osio, jonka liitospiste on %s\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Asetan IDE-levy盲"
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
+"Nyt sinun pit盲盲 valita miten haluat asentaa Mandrake Linux k盲ytt枚-\n"
+"j盲rjestelm盲n kovalevyllesi. Jos kovalevysi on tyhj盲, tai nykyinen\n"
+"k盲ytt枚j盲rjestelm盲si k盲ytt盲盲 siit盲 kaiken vapaan tilan, sinun pit盲盲 osioida\n"
+"se. K盲yt盲nn枚ss盲 osiointi tarkoittaa kovalevyn loogista jakamista\n"
+"tehd盲ksesi tilaa Mandrake Linux -j盲rjestelm盲n asennukselle.\n"
+"\n"
+"Koska osiointiprosessin muutoksia yleens盲 ei voi peruuttaa, ja se voi\n"
+"johtaa tietojen h盲vi盲miseen jos toinen k盲ytt枚j盲rjestelm盲 on jo asennettu,\n"
+"osiointi voi olla pelottavaa ja stressaavaa jos olet kokematon k盲ytt盲j盲.\n"
+"Onneksi DrakX sis盲lt盲盲 velhon, joka yksinkertaistaa t盲m盲n prosessin.\n"
+"Ennen kuin aloitat, lue n盲m盲 ohjeet rauhassa.\n"
+"\n"
+"Riippuen kovalevyasetuksistasi, tarjolla on useita eri vaihtoehtoja:\n"
+"\n"
+" * \"%s\": t盲m盲 vaihtoehto suorittaa vapaana olevan tilan\n"
+"automaattisen osioinnon. Sinulta ei kysyt盲 mit盲盲n muuta;\n"
+"\n"
+" * \"%s\": velho on tunnistanut olemassa olevat\n"
+"Linux-osiot. Jos haluat k盲ytt盲盲 niit盲, valitse t盲m盲 vaihtoehto. Sinua\n"
+"pyydet盲盲n seuraavaksi valitsemaan osioiden liitospisteet. Ennest盲盲n\n"
+"k盲ytettyj盲 liitoskohtia ehdotetaan oletuksena ja yleens盲 niit盲 ei kannata\n"
+"muuttaa;\n"
+"\n"
+" * \"%s\": jos Microsoft Windows on\n"
+"asennettu kovalevyllesi ja se vie kaiken tilan, sinun pit盲盲 luoda vapaata\n"
+"tilaa Linuxille. Tehd盲ksesi t盲m盲n, voit joko poistaa Windows-osion (katso\n"
+"``Tyhjenn盲 koko levy''-vaihtoehto) tai muuttaa FAT-osion kokoa. Osion\n"
+"koon muuttaminen voidaan tehd盲 ilman tietojen h盲vitt盲mist盲, kunhan olet\n"
+"eheytt盲nyt sen ja se k盲ytt盲盲 FAT-tiedostoj盲rjestelm盲盲. Tietojen varmistus\n"
+"on kuitenkin suotavaa. T盲m盲 vaihtoehto on suositeltu jos haluat k盲ytt盲盲\n"
+"Mandrake Linuxia ja Microsoft Windowsia samassa koneessa.\n"
+"\n"
+"!! \"9.1\" jakelusta l盲htien asennusohjelma osaa my枚s muuttaa NTFS-\n"
+" osion kokoa, mutta se on viel盲 KOKEILUVAIHEESSA, joten teet sen\n"
+" OMALLA VASTUULLASI. Voit menett盲盲 tietojasi !!\n"
+"\n"
+" Ennen kuin valitset t盲m盲n vaihtoehdon, sinun pit盲盲 ymm盲rt盲盲 ett盲 t盲m盲n\n"
+"toimenpiteen j盲lkeen Windows-osiosi on pienempi kuin t盲ll盲 hetkell盲.\n"
+"Sinulla tulee olemaan v盲hemm盲n vapaata tilaa Windowsille, johon voit\n"
+"tallentaa tietojasi tai asentaa uusia ohjelmia;\n"
+"\n"
+" * \"%s\": valitse t盲m盲 jos haluat poistaa kaikki tiedot\n"
+"ja osiot ja asentaa Mandrake Linux -j盲rjestelm盲si niiden tilalle. Ole\n"
+"varovainen t盲m盲n valinnan kanssa, koska et pysty peruuttamaan\n"
+"valintaasi kun olet hyv盲ksynyt t盲m盲n toimenpiteen;\n"
+"\n"
+" !! Jos valitset t盲m盲n vaihtoehdon, kaikki tiedot kovalevyll盲si tuhoutuu !!\n"
+"\n"
+" * \"%s\": t盲m盲 vaihtoehto yksinkertaisesti poistaa kaikki\n"
+"kovalevylt盲 ja aloittaa puhtaalta levylt盲 osioimalla kaikki alusta asti.\n"
+"Kaikki tiedot kovalevyll盲si tuhoutuu;\n"
+"\n"
+" !! Jos valitset t盲m盲n vaihtoehdon, kaikki tiedot kovalevyll盲si "
+"tuhoutuu !!\n"
+"\n"
+" * \"%s\": valitse t盲m盲 vaihtoehto, jos haluat itse\n"
+"m盲盲ritt盲盲 kovalevysi osioinnin. Ole varovainen - t盲m盲 on tehokas mutta\n"
+"vaarallinen vaihtoehto. Voit helposti menett盲盲 kaikki tietosi. Eli,\n"
+"盲l盲 k盲yt盲 t盲t盲 vaihtoehtoa, jos et tied盲 tarkalleen mit盲 teet. Jos haluat\n"
+"lis盲tietoja DiskDrake ty枚kalun k盲yt枚st盲, katso osaa ``Managing Your \n"
+"Partitions'' osiota ``Starter Guide'':ssa."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Ukraine"
+msgstr "Ukraina"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Asetan PCMCIA kortteja..."
+msgid "Application:"
+msgstr "Sovellus:"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "External ISDN modem"
+msgstr "Ulkoinen ISDN-modeemi"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "3. n盲pp盲imen emulaatio"
+msgid "if set to yes, report check result by mail."
+msgstr "jos asetettu, raportoi tarkistuksen tulos s盲hk枚postitse."
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "2. n盲pp盲imen emulaatio"
+msgid "Your choice? (default %s) "
+msgstr "Valintasi? (oletus %s) "
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "N盲pp盲inemulaatio"
+msgid "Trouble shooting"
+msgstr "Vianetsint盲"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Mihin sarjaporttiin hiiresi on liitetty."
+msgid " / Region"
+msgstr " / alue"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Hiiren portti"
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
+"Klassinen tapa etsi盲 virheit盲 盲盲niasetuksissa on suorittaa \n"
+"seuraavat komennot:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" kertoo mit盲 ajuria 盲盲nikorttisi \n"
+"k盲ytt盲盲 oletuksena.\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" kertoo mit盲 ajuria 盲盲nikorttisi\n"
+"k盲ytt盲盲 t盲ll盲 hetkell盲.\n"
+"\n"
+"- \"/sbin/lsmod\" komennolla tarkistat onko 盲盲nikortin moduuli (ajuri)\n"
+"ladattu vai ei .\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" ja \"/sbin/chkconfig --list alsa\"\n"
+"kertoo sinulle jos 盲盲ni- ja ALSA-palvelut ovat asetettu toimimaan\n"
+"initlevel 3 -tasossa.\n"
+"\n"
+"- \"aumix -q\" kertoo onko 盲盲ni mykistetty vai ei.\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" kertoo mik盲 ohjelma k盲ytt盲盲 盲盲nikorttia.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Valitse hiiren tyyppi."
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"Testisivu(t) on l盲hetetty tulostimelle.\n"
+"Voi kest盲盲 hetken ennen kuin tulostus alkaa.\n"
+"Tulostuksen tila:\n"
+"%s\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Salausavain %s:lle"
+msgid "daily"
+msgstr "p盲ivitt盲in"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Upgrade %s"
-msgstr "P盲ivit盲 %s"
+msgid "and one unknown printer"
+msgstr " ja yksi tuntematon tulostin "
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Onko t盲m盲 asennus vai p盲ivitys?"
+msgid "Ireland"
+msgstr "Irlanti"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Asenna/P盲ivit盲"
+msgid "kernel version"
+msgstr "ytimen versio"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "T盲ss盲 on koko lista tarjolla olevista n盲pp盲imist枚ist盲"
+msgid " Restore Configuration "
+msgstr " Palauta asetukset "
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Valitse n盲pp盲imist枚si asettelu."
+msgid "Is this the correct setting?"
+msgstr "Onko t盲m盲 oikea asetus?"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Quit"
-msgstr "Lopeta"
+msgid ""
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
+"Sinulla on nyt mahdollisuus asettaa Internet-/verkkoyhteytesi. Jos\n"
+"haluat yhdist盲盲 tietokoneesi Internetiin tai l盲hiverkkoon, paina\n"
+"\"%s\". Mandrake Linux yritt盲盲 tunnistaa verkkolaitteet ja\n"
+"modeemit automaattisesti. Jos t盲m盲 tunnistus ep盲onnistuu, poista\n"
+"valinta kohdasta \"%s\" seuraavalla kerralla.\n"
+"Voit my枚s j盲tt盲盲 verkon asettamisen tekem盲tt盲, tai tehd盲 sen\n"
+"my枚hemmin. Siin盲 tapauksessa paina \"%s\" painiketta jolloin\n"
+"siirryt seuraavaan vaiheeseen.\n"
+"\n"
+"Kun asetat verkkoasi, seuraavat yhteystavat ovat tarjolla:\n"
+"tavallinen modeemi, ISDN modeemi, ADSL yhteys, kaapelimodeemi\n"
+"ja tavallinen l盲hiverkkoyhteys (Ethernet).\n"
+"\n"
+"Emme k盲y l盲pi kaikkia asetusoptioita t盲盲ll盲 - muistutamme vain\n"
+"ett盲 sinun kannattaa varmistaa ett盲 sinulla on kaikki tarvittavat tiedot\n"
+"k盲ytett盲viss盲, kuten mahdollinen IP-osoite, oletus yhdysk盲yt盲v盲,\n"
+"DNS palvelinten osoitteet jne. Internet-palveluntarjoajaltasi tai\n"
+"j盲rjestelm盲n yll盲pit盲j盲lt盲.\n"
+"\n"
+"Voit katsoa ``Aloitusoppaasta'' Internetyhteyksi盲 koskevia tietoja\n"
+"asetuksien tekemisest盲 tai odottaa kunnes j盲rjestelm盲si on asennettu\n"
+"ja k盲ytt盲盲 m盲盲ritysohjelmaa yhteytesi asettamiseen."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "License agreement"
-msgstr "K盲ytt枚oikeussopimus"
+msgid "Wizard Configuration"
+msgstr "Velhon asettaminen"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Tapahtui virhe"
+msgid "Autoprobe"
+msgstr "Automaattitunnistus"
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> vaihtaa elementti盲 | <Space> valitsee | <F12> seuraava "
+msgid "Backup system files..."
+msgstr "Varmuuskopioi j盲rjestelm盲tiedostot..."
-#: ../../install_steps_newt.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux asennus %s"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "En voi k盲ytt盲盲 kuulutusta ilman NIS-verkkoaluetta"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Ei levykeasemaa k盲ytett盲viss盲"
+msgid "Removing printer \"%s\"..."
+msgstr "Poistetaan tulostin \"%s\" ..."
-# mat
-#: ../../install_steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Tervetuloa %s:n"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
msgstr ""
-"Osa t盲rkeist盲 paketeista j盲i asentamatta loppuun asti.\n"
-"Joko cdrom-asemasi tai levy on viallinen.\n"
-"Tarkista cdrom Linux-koneessa k盲ytt盲m盲ll盲 \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
+"Ole hyv盲 ja m盲盲rit盲 miss盲 auto_install.cfg tiedosto sijaitsee.\n"
+"\n"
+"J盲t盲 tyhj盲ksi jos et halua asettaa automaattiasennuksen tilaa.\n"
+"\n"
-#: ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Tietotaso joka voidaan saada cpuid-k盲skyn kautta"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Kahdentunut liitospiste %s"
+msgid "Peru"
+msgstr "Peru"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tapahtui virhe, eik盲 sit盲 ei voida k盲sitell盲 kunnolla.\n"
-"Jatka omalla vastuullasi."
+msgid " on device: %s"
+msgstr "laitteella: %s"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Odota hetki"
+msgid "Remove Windows(TM)"
+msgstr "Poista Windows(TM)"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../services.pm:1
#, c-format
-msgid "Ok"
-msgstr "Ok"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "K盲ynnist盲盲 X-kirjasinpalvelimen (pakollinen, jos haluat ajaa XFree:t盲)"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Finish"
-msgstr "Valmis"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
+"Suurin osa n盲ist盲 arvoista otettiin\n"
+"suoraan k盲yt枚ss盲 olevassa j盲rjestelm盲st盲si.\n"
+"Voit muokata niit盲 tarvittaessa."
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Basic"
-msgstr "Perusasetukset"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Valitse kirjasintiedosto tai hakemisto ja klikkaa 'Lis盲盲'"
-#: ../../interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Lis盲asetukset"
+msgid "Madagascar"
+msgstr "Madagaskar"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Remove"
-msgstr "Poista"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Modify"
-msgstr "Muokkaa"
+msgid "Cron not available yet as non-root"
+msgstr "Cron ei viel盲 tue muita kuin p盲盲k盲ytt盲j盲盲"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add"
-msgstr "Lis盲盲"
+msgid "System"
+msgstr "J盲rjestelm盲"
-#: ../../interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "Valitse tiedosto"
+msgid "Do you want to use this feature?"
+msgstr "Haluatko k盲ytt盲盲 t盲t盲 ominaisuutta?"
#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"T盲ss盲 voit valita n盲pp盲imen tai n盲pp盲inyhdistelm盲n joka sallii\n"
-"vaihtamisen eri n盲pp盲inkarttojen v盲lill盲 (esim. latin ja ei-latin)"
+msgid "Arabic"
+msgstr "Arabia"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Oikea \"Windows\" n盲pp盲in"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr ""
+"\n"
+"- Valitsimet:\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Vasen \"Windows\" n盲pp盲in"
+msgid "Password required"
+msgstr "Salasana vaaditaan"
-#: ../../keyboard.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Valikko\" n盲pp盲in"
+msgid "%d minutes"
+msgstr "%d minuuttia"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt ja Shift n盲pp盲imet samanaikaisesti"
+msgid "Graphics card: %s"
+msgstr "N盲yt枚nohjain: %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl ja Alt n盲pp盲imet samanaikaisesti"
+msgid "WebDAV transfer failed!"
+msgstr "WebDAV siirto ep盲onnistui!"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock n盲pp盲in"
+msgid "XFree configuration"
+msgstr "XFree:n asentaminen"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control ja Shift n盲pp盲imet samanaikaisesti"
+msgid "Choose action"
+msgstr "Valitse toiminto"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Molemmat Shift n盲pp盲imet samanaikaisesti"
+msgid "French Polynesia"
+msgstr "Ranskan Polynesia"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Oikea Alt n盲pp盲in"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+"DrakX yleens盲 tunnistaa hiiren n盲pp盲inten m盲盲r盲n. Jos tunnistus ep盲-\n"
+"onnistuu DrakX olettaa, ett盲 sinulla on kaksin盲pp盲iminen hiiri ja kytkee\n"
+"siihen kolmannen n盲pp盲imen emulaatiolla. Kolmatta n盲pp盲int盲 kaksi-\n"
+"n盲pp盲imisess盲 hiiress盲 voidaan k盲ytt盲盲 painamalla molempia painikkeita\n"
+"samanaikaisesti. DrakX tiet盲盲 my枚s automaattisesti, onko sinulla PS/2,\n"
+"sarja- vai USB-hiiri.\n"
+"\n"
+"Jos haluat asettaa eri tyyppisen hiiren, valitse sopiva tyyppi oheisesta\n"
+"listasta.\n"
+"\n"
+"Jos valitset muun kuin oletushiiren, saat eteesi hiiren testiruudun. K盲yt盲\n"
+"hiiren nappeja ja rullaa varmistaaksesi, ett盲 asetukset ovat oikeat. Jos\n"
+"hiiri ei toimi kunnolla, paina v盲lily枚nti盲 tai [enter]:盲 peruuttaaksesi, "
+"mink盲\n"
+"j盲lkeen voit valita uudelleen.\n"
+"\n"
+"Joskus rullahiiri盲 ei tunnisteta oikein. Sinun pit盲盲 valita oikea malli\n"
+"listasta. Varmista, ett盲 valitset mallin joka vastaa porttia johon hiiresi "
+"on\n"
+"liitetty. Kun olet painanut \"%s\", hiiren kuva tulee esille. Sitten\n"
+"sinun PIT脛脛 py枚ritt盲盲 rullaa, jotta se aktivoituisi oikein. Varmista sitten\n"
+"kaikkien painikkeiden toiminta sek盲 hiiren liikkuminen."
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavia (latin)"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Tuki OKI 4w -yhteensopiville Windows-tulostimille."
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamilainen \"numerorivi\" QWERTY"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "K盲ynnist盲 ALSA (Advanced Linux Sound Architecture) 盲盲nij盲rjestelm盲"
-#: ../../keyboard.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "US n盲pp盲imist枚 (kansainv盲linen)"
+msgid "Installing driver for %s card %s"
+msgstr "Asetan ajuria %s ohjaimelle %s"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "US n盲pp盲imist枚"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Olet siirt盲nyt edellisen oletustulostimesi (\"%s\"). Asetetaanko se "
+"oletustulostimeksi my枚s uudessa %s tulostusj盲rjestelm盲ss盲?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "UK keyboard"
-msgstr "UK n盲pp盲imist枚"
+msgid "Enable Server"
+msgstr "Ota palvelin k盲ytt枚枚n"
#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "Ukraina"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkki (perinteinen \"Q\"-malli)"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Verkkoyhteys ei ollut k盲ynniss盲, eik盲 sit盲 voitu k盲ynnist盲盲. Ole hyv盲 ja "
+"tarkista laitteistosi ja asetuksesi. Sen j盲lkeen voit yritt盲盲 asettaa "
+"et盲tulostinta uudelleen."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkki (perinteinen \"F\"-malli)"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Aseta k盲ytt盲m盲si k盲ynnistyslevyke asemaan %s"
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik-n盲pp盲imist枚"
+msgid "Local network(s)"
+msgstr "Paikallisverkko(ja)"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Thai-n盲pp盲imist枚"
+msgid "Remove Windows"
+msgstr "Poista Windows"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamil (kirjoituskone-asettelu)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Kuvanlukijasi %s on asetettu.\n"
+"Nyt voit lukea dokumentit tietokoneeseesi k盲ytt盲m盲ll盲 \"XSane\" Multimedia / "
+"Grafiikka valikossa."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamil (ISCII-asettelu)"
+msgid "Firewire controllers"
+msgstr "FireWire ohjaimet"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (cyrillic)"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"Asetettuasi yleiset k盲ynnistyslataajan parametrit, n盲ytet盲盲n lista\n"
+"k盲ynnistysvaihtoehdoista, jotka k盲ynnistyksen aikana on tarjolla.\n"
+"\n"
+"Jos joku toinen k盲ytt枚j盲rjestelm盲 on asennettu koneessasi, se\n"
+"lis盲t盲盲n automaattisesti k盲ynnistysvalikkoon. Voit hienos盲盲t盲盲\n"
+"olemassaolevia optioita, painamalla \"%s\" luodaksesi uuden\n"
+"tietueen; valitsemalla olemassa olevan tietueen ja painamalla\n"
+"\"%s\" muokataksesi sen asetuksia; tai \"%s\" jos haluat\n"
+"poistaa sen. Painamalla \"%s\" tekem盲si muutokset otetaan k盲ytt枚枚n.\n"
+"\n"
+"Jos et halua kenenk盲盲n p盲盲sev盲n osaan k盲ytt枚j盲rjestelmist盲, voit\n"
+"poistaa kyseiset tietueet, jolloin ne poistetaan k盲ynnistysvalikosta.\n"
+"Mutta siin盲 tapauksessa tarvitset itse k盲ynnistyslevykett盲 p盲盲st盲ksesi\n"
+"kyseisiin k盲ytt枚j盲rjestelmiin!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
+msgid "System mode"
+msgstr "J盲rjestelm盲n tila"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"NetWare-palvelimen tulostimelle tulostaaksesi sinun pit盲isi sy枚tt盲盲 NetWare-"
+"palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja "
+"mahdollisesti tulostusjonon nimi sille tulostimelle, jota haluat k盲ytt盲盲, "
+"sek盲 soveltuva k盲ytt盲j盲tunnus ja salasana."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Slovenian"
-msgstr "Slovenia"
+msgid "Netmask:"
+msgstr "Verkkopeite:"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Ruotsi"
+msgid "Append"
+msgstr "Lis盲盲"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ven盲j盲 (Yawerty)"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"P盲ivit盲 tulostinlistaa (n盲yt盲 kaikki saatavilla olevat CUPS-et盲tulostimet)"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ven盲j盲"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
+"Kun t盲m盲 optio on valittu, jokainen kerta kun CUPS k盲ynnistyy, seuraavat "
+"asiat varmistetaan:\n"
+"\n"
+"- jos LPD/LPRng on asennettu, CUPS ei ylikirjoita /etc/printcap\n"
+"\n"
+"- jos /etc/cups/cupsd.conf puuttuu, se luodaan.\n"
+"\n"
+"- kun tulostintiedot kuulutetaan, se ei sis盲ll盲 \"localhost\":a palvelimen "
+"nimen盲.\n"
+"\n"
+"Jos joku n盲ist盲 toiminnoista aiheuttaa sinulle ongelmia, poista t盲m盲 optio, "
+"mutta silloin sinun pit盲盲 itse huolehtia n盲ist盲 asioista."
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romania (qwerty)"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"OSS (Open Sound System, eli avoin 盲盲nij盲rjestelm盲) oli ensimm盲inen 盲盲ni-"
+"API.\n"
+"Se on k盲ytt枚j盲rjestelm盲riippumaton 盲盲ni-API (se on saatavilla useimmille\n"
+"unix-j盲rjestelmille), mutta se aika perustasoa ja rajoitettu API.\n"
+"Sen lis盲ksi, OSS-ajureissa kaikki 'kehitt盲v盲t py枚r盲n uudelleen'.\n"
+"\n"
+"ALSA (Advanced Linux Sound system, eli Linuxin edistynyt 盲盲nij盲rjestelm盲) "
+"on\n"
+"modulaarinen arkkitehtuuri, joka tukee suurta m盲盲r盲盲 ISA, USB ja PCI "
+"kortteja.\n"
+"\n"
+"Se tarjoaa my枚s paljon korkeamman tason API:n kuin OSS.\n"
+"\n"
+"K盲ytt盲盲ksesi ALSAa, voit k盲ytt盲盲 yht盲 n盲ist盲:\n"
+"- vanha OSS-yhteensopiva api.\n"
+"- uusi ALSA-api, joka tarjoaa useita parannettuja ominaisuuksia,\n"
+"mutta vaatii ALSA-kirjaston k盲ytt枚盲.\n"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romania (qwertz)"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"Automaattinen asennus voi olla t盲ysin automatisoitu,\n"
+"jos niin halutaan. Siin盲 tapauksessa asennus t盲ytt盲盲\n"
+"koko kiintolevyn! (tarkoitettu toisen koneen asentamiseksi),\n"
+"\n"
+"Ehk盲 haluat mieluummin toistaa asennuksen.\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
+msgid "Network printer \"%s\", port %s"
+msgstr "Verkkotulostin \"%s\", portissa %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugali"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Valitse verkkokortti, joka on kytketty paikallisverkkoon."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Puola (qwertz j盲rjestys)"
+msgid "OK to restore the other files."
+msgstr "OK palauttaaksesi muut tiedostot."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Puola (qwerty j盲rjestys)"
+msgid "Please choose your keyboard layout."
+msgstr "Valitse n盲pp盲imist枚si asettelu."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norja"
+msgid "Printer Device URI"
+msgstr "Tulostinlaitteen osoite (URI)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dutch"
-msgstr "Hollanti"
+msgid "Not erasable media!"
+msgstr "Ei tyhjennett盲v盲盲 mediaa!"
-#: ../../keyboard.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Malta (US)"
+msgid "Terminal-based"
+msgstr "Terminaalipohjainen"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Malta (UK)"
+msgid "Installing a printing system in the %s security level"
+msgstr "Asennan tulostusj盲rjestelm盲n turvatasolla %s"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolia (cyrillic)"
+msgid "The user name is too long"
+msgstr "K盲ytt盲j盲nimi on liian pitk盲"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar"
+msgid "Other OS (windows...)"
+msgstr "Muu k盲ytt枚j盲rjestelm盲 (Windows...)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Macedonian"
-msgstr "Makedonia"
+msgid "WebDAV remote site already in sync!"
+msgstr "WebDAV et盲sivusto on jo synkronoitu!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Reading printer database..."
+msgstr "Luetaan tulostintietokantaa..."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Latvia"
+msgid "Generate auto install floppy"
+msgstr "Luo automaattinen asennuslevyke"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Liettua \"foneettinen\" QWERTY"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
+"\t\t k盲ytt盲j盲tunnus: %s\n"
+"\t\t polulla: %s \n"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Liettua \"numerorivi\" QWERTY"
+msgid "Somalia"
+msgstr "Somalia"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liettua AZERTY (uusi)"
+msgid "No open source driver"
+msgstr "Ei avoimen l盲hdekoodin ajuria"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liettua AZERTY (vanha)"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Pohjautuu edelliseen tasoon, mutta j盲rjestelm盲 on kokonaan suljettu.\n"
+"Turvallisuusasetukset ovat tiukimmillaan."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Latvia"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinalainen amerikka"
+msgid "New Caledonia"
+msgstr "Uusi-Kaledonia"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Korealainen n盲pp盲imist枚"
+msgid "European protocol (EDSS1)"
+msgstr "Eurooppalainen protokolla (EDSS1)"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japani 106-n盲pp盲iminen"
+msgid "Video mode"
+msgstr "N盲ytt枚tila"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Please enter your email address below "
+msgstr "Sy枚t盲 s盲hk枚postiosoitteesi alla "
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italia"
+msgid "Oman"
+msgstr "Oman"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Icelandic"
-msgstr "Islanti"
+msgid "Network Monitoring"
+msgstr "Verkon valvonta"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Iranian"
-msgstr "Iran"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Foneettinen)"
+msgid "New size in MB: "
+msgstr "Uusi koko (Mt): "
-#: ../../keyboard.pm:1
+# mat
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israel"
+msgid "Partition table type: %s\n"
+msgstr "Osion tyyppi: %s\n"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Kroatia"
+msgid "Authentication Windows Domain"
+msgstr "Tunnistus: Windows verkkoalue"
#: ../../keyboard.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Unkari"
+msgid "US keyboard"
+msgstr "US n盲pp盲imist枚"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Buttons emulation"
+msgstr "N盲pp盲inemulaatio"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid ", network printer \"%s\", port %s"
+msgstr ", verkkotulostin \"%s\", portti %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Greek"
-msgstr "Kreikka"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup toimintoja nauhan kautta:\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (\"Latin\"-j盲rjestys)"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
+"\n"
+" FTP yhteysongelma: Varmistustietojasi ei voitu l盲hett盲盲 FTP:n kautta.\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (\"Ven盲l盲inen\"-j盲rjestys)"
+msgid "Sending Speed:"
+msgstr "L盲hetysnopeus:"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "French"
-msgstr "Ranska"
+msgid "Halt bug"
+msgstr "Halt virhe"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Finnish"
-msgstr "Suomi"
+msgid "Mail alert configuration"
+msgstr "Postih盲lytyksen asetukset"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Espanja"
+msgid "Tokelau"
+msgstr "Tokelau"
#: ../../keyboard.pm:1
#, c-format
-msgid "Estonian"
-msgstr "Eesti"
+msgid "Bosnian"
+msgstr "Bosnia"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Ruotsi)"
+msgid "Release: "
+msgstr "Jakelu"
-#: ../../keyboard.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norja)"
+msgid "Connection speed"
+msgstr "Yhteyden nopeus"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
+"Sy枚t盲 kirjoittavan CD-asemasi laitenimi\n"
+" esim: 0,1,0"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Danish"
-msgstr "Tanska"
+msgid "Namibia"
+msgstr "Namibia"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Database Server"
+msgstr "Tietokantapalvelin"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Saksa (ei kuolleita n盲pp盲imi盲)"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "erikoisominaisuudet ajurissa (polttomahdollisuus ja/tai DVD tuki)"
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "German"
-msgstr "Saksa"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "En voi lis盲t盲 osiota _alustetulle_ RAID:lle md%d"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tsekki (QWERTY)"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
+"ssa.\n"
+"HUOMAA, ETT脛 TUKI ON KOKEELLINEN JA VOI JUMIUTTAA TIETOKONEESI.\n"
+"Korttisi on tuettu my枚s XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tsekki (QWERTZ)"
+msgid "Please wait, setting security options..."
+msgstr "Odota hetki, asetetaan turvaoptiot..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Sveitsi (Ranskalainen j盲rjestys)"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Tuntematon|CPH05X (bt878) [monta valmistajaa]"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Sveitsi (Saksalainen j盲rjestys)"
+msgid "Launch the graphical environment when your system starts"
+msgstr "K盲yt盲 X-Window-j盲rjestelm盲盲"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Valkoven盲j盲"
+msgid "hourly"
+msgstr "tunneittain"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosnia"
+msgid " Successfuly Restored on %s "
+msgstr " onnistuneesti palautettu paikkaan %s "
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilia"
+msgid "Making printer port available for CUPS..."
+msgstr "Asetan tulostusporttia CUPS:n k盲ytt枚枚n..."
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaria (BDS)"
+msgid "Antigua and Barbuda"
+msgstr "Antigua and Barbuda"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaria (foneettinen)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! Osoittaa ett盲 salasana j盲rjestelm盲n tietokannassa on eri kuin\n"
+"P盲盲tePalvelimen tietokannassa oleva.\n"
+"Poista ja lis盲盲 k盲ytt盲j盲 uudestaan P盲盲tePalvelimeen mahdollistaaksesi\n"
+"sis盲盲nkirjoittautuminen."
#: ../../keyboard.pm:1
#, c-format
-msgid "Bengali"
-msgstr "Bengali"
+msgid "Spanish"
+msgstr "Espanja"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belgia"
+msgid "Start"
+msgstr "K盲ynnist盲"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 verkkokorttien 'promiscuous' tarkistus."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabia"
+msgid "Configuring applications..."
+msgstr "Asetetaan ohjelmia..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneettinen)"
+msgid "Normal modem connection"
+msgstr "Tavallinen modeemiyhteys"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (kirjoituskone)"
+msgid "File Selection"
+msgstr "Tiedostojen valinta"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armeenia (vanha)"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Mit盲 ISDN-asetuksia haluat k盲ytt盲盲?\n"
+"\n"
+"* Vanha asetusj盲rjestelm盲 k盲ytt盲盲 isdn4net:i盲. Se sis盲lt盲盲 tehokkaat\n"
+" ty枚kalut, mutta on vaikea asettaa, eik盲 se ole standardi.\n"
+"\n"
+"* Uusi asetusj盲rjestelm盲 on helpompi ymm盲rt盲盲, enemm盲n k盲yt枚ss盲,\n"
+" mutta se sis盲lt盲盲 v盲hemm盲n ty枚kaluja.\n"
+"\n"
+"Suositus on k盲ytt盲盲 uutta ja kevyemp盲盲 asetusj盲rjestelm盲盲.\n"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albaani"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Polish"
-msgstr "Puola"
+msgid "Run config tool"
+msgstr "Suorita asetusty枚kalu"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Bootloader installation"
+msgstr "K盲ytt枚j盲rjestelm盲n lataajan asennus"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Root partition size in MB: "
+msgstr "Juuriosion koko Mt: "
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Zambia"
-msgstr "Zambia"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "T盲m盲 on pakollinen paketti, sit盲 ei voida poistaa valinnoista"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "South Africa"
-msgstr "Etel盲-Afrikka"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO-kuva on %s"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbia"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) on nimipalvelin (DNS) jota k盲ytet盲盲n muunnettaessa koneiden "
+"verkkonimi盲 IP-osoitteiksi."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Disconnect..."
+msgstr "Katkaise yhteys..."
#: ../../lang.pm:1
#, c-format
-msgid "Yemen"
-msgstr "Jemen"
+msgid "Saint Lucia"
+msgstr "Saint Lucia"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "Report"
+msgstr "Raportti"
#: ../../lang.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis ja Futuna"
+msgid "Palau"
+msgstr "Palau"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "level"
+msgstr "taso"
-#: ../../lang.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
+"Kaikkia tapauksia seurataan yhden p盲tev盲n MandrakeSoft:n teknisen "
+"asiantuntijan toimesta."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Yhdysvaltain Neitsytsaaret"
+msgid "Package Group Selection"
+msgstr "Pakettiryhmien valinta"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Brittil盲iset Neitsytsaaret"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Palauta verkon kautta protokollalla: %s"
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "You can configure each parameter of the module here."
+msgstr "Voit m盲盲ritt盲盲 moduulin jokaisen parametrin t盲盲ll盲."
-#: ../../lang.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent ja Grenadiinit"
+msgid "Choose the resolution and the color depth"
+msgstr "Valitse n盲ytt枚tila ja v盲rim盲盲r盲"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Vatican"
-msgstr "Vatikaani"
+msgid "Emulate third button?"
+msgstr "Emuloi kolmas n盲pp盲in?"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Et voi luoda uutta osiota.\n"
+"(koska sinulla on jo maksimim盲盲r盲 prim盲盲riosioita k盲yt枚ss盲).\n"
+"Poista ensin yksi prim盲盲riosio, ja luo laajennettu osio sen tilalle."
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Mount"
+msgstr "Liit盲"
-#: ../../lang.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Yhdysvaltain Tyynenmeren erillissaaret"
+msgid "Creating auto install floppy"
+msgstr "Valmistelen automaattisen asennuksen levykett盲"
-#: ../../lang.pm:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Uganda"
+msgid "Install updates"
+msgstr "Asenna p盲ivitykset"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraina"
+msgid "text box height"
+msgstr "tekstiruudun korkeus"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
+msgid "State"
+msgstr "Tila"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
+msgid "Be sure a media is present for the device %s"
+msgstr "Varmista, ett盲 media on laitteessa %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Enable multiple profiles"
+msgstr "K盲yt盲 useaa profiilia"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad ja Tobago"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"N盲ill盲 asetuksilla voit varmuuskopioida ja palauttaa kaikki tiedostot /etc-"
+"hakemistosta.\n"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Turkey"
-msgstr "Turkki"
+msgid "Local printer"
+msgstr "Paikallinen tulostin"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid "Files Restored..."
+msgstr "Tiedostot palautettu..."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisia"
+msgid "Package selection"
+msgstr "Pakettien valinta"
#: ../../lang.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
+msgid "Mauritania"
+msgstr "Mauritania"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "East Timor"
-msgstr "It盲-Timor"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
+"Voin pit盲盲 nykyiset asetuksesi sek盲 olettaa ett盲 olet jo asettanut DHCP-"
+"palvelimen; siin盲 tapauksessa varmista, ett盲 olen tunnistanut k盲ytt盲m盲si "
+"verkkoasetukset verkollesi oikein; en aseta sit盲 uudelleen enk盲 koske DHCP-"
+"palvelimen asetuksiin.\n"
+"\n"
+"Oletus DNS-tietue on v盲limuisti-nimipalvelin, joka on asetettu palomuurissa. "
+"Voit vaihtaa sen tilalle esimerkiksi Internet-palveluntarjoajasi DNS:n IP:"
+"n.\n"
+"\n"
+"Tai, voin uudelleenasettaa verkkoliit盲nt盲si ja (uudelleen)asettaa DHCP-"
+"palvelimen sinulle.\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Paikallista tulostinta ei l枚ydetty! Asentaaksesi tulostimen sy枚t盲 laitenimi/ "
+"tiedostonimi sy枚teriville (Rinnakkaisportti: /dev/lp0, /dev/lp1, ... "
+"vastaavat LPT1:, LPT2:,..., ensimm盲inen USB tulostin:/dev/usb/lp0, "
+"seuraava: /dev/usb/lp1, ...)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tajikistan"
-msgstr "Tadzikistan"
+msgid "All primary partitions are used"
+msgstr "Kaikki prim盲盲riosiot k盲ytetty"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thailand"
-msgstr "Thaimaa"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Kun t盲m盲 on tehty, suosittelemme k盲ynnist盲m盲盲n X-ymp盲rist枚n\n"
+"uudelleen v盲ltt盲盲ksesi j盲rjestelm盲n nimen vaihdoksesta koituvat ongelmat."
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Togo"
-msgstr "Togo"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
+"Automaattinen uuden laitteiston havaitseminen ja asettaminen "
+"k盲ynnistett盲ess盲."
-#: ../../lang.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "French Southern Territories"
-msgstr "Ranskan etel盲iset alueet"
+msgid "Installation Server Configuration"
+msgstr "Asennuspalvelimen asetus"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Chad"
-msgstr "Tsad"
+msgid "Configuring IDE"
+msgstr "Asetan IDE-levy盲"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks ja Caicossaaret"
+msgid "Network functionality not configured"
+msgstr "Verkkotoimintoja ei ole asetettu"
-#: ../../lang.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Swaziland"
-msgstr "Swazimaa"
+msgid "Configure module"
+msgstr "Aseta moduuli"
#: ../../lang.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syyria"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kookossaaret"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Disconnecting from the Internet "
+msgstr "Katkaisen Internetyhteyden "
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome ja Principe"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Sinun t盲ytyy k盲ynnist盲盲 kone uudelleen ennen kuin muutos tulee voimaan"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "Provider phone number"
+msgstr "Palveluntarjoajan puhelinnumero"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Somalia"
-msgstr "Somalia"
+msgid "Host %s"
+msgstr "Kone %s"
#: ../../lang.pm:1
#, c-format
-msgid "Senegal"
-msgstr "Senegal"
+msgid "Armenia"
+msgstr "Armenia"
#: ../../lang.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "Fiji"
+msgstr "Fiji"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Parametrit: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Aseta salasanojen v盲himm盲ispituus sek盲 v盲himm盲ism盲盲r盲 numeroita ja isoja "
+"kirjaimia."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovakia"
+msgid "Second floppy drive"
+msgstr "Toinen levykeasema"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard ja Jan Mayen"
+msgid "About Harddrake"
+msgstr "Tietoja Harddrake:sta"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Slovenia"
-msgstr "Slovenia"
+msgid "Drive capacity"
+msgstr "Aseman kapasiteetti"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Aseta levyke asemaan\n"
+"Kaikki levykkeen tiedot h盲vi盲v盲t"
-#: ../../lang.pm:1
+# mat
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapore"
+msgid "Size: %s"
+msgstr "Koko: %s"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Control and Shift keys simultaneously"
+msgstr "Control ja Shift n盲pp盲imet samanaikaisesti"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychellit"
+msgid "secondary"
+msgstr "toissijainen"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Solomon Islands"
-msgstr "Salomonsaaret"
+msgid "View Backup Configuration."
+msgstr "N盲yt盲 varmuuskopioinnin asetukset."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabia"
+msgid "if set to yes, report check result to syslog."
+msgstr "jos asetettu, raportoidaan tarkistuksen tulokset syslog:iin."
-#: ../../lang.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
+msgid "No password"
+msgstr "Ei salasanaa"
#: ../../lang.pm:1
#, c-format
-msgid "Russia"
-msgstr "Ven盲j盲"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Romania"
-msgstr "Romania"
+msgid "There is no existing partition to use"
+msgstr "Ei ole olemassa olevaa osiota k盲ytett盲v盲ksi"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Reunion"
-msgstr "Reunion"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"Seuraavat kuvanlukijat:\n"
+"\n"
+"%s\n"
+"on k盲ytett盲viss盲 j盲rjestelm盲ss盲si.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Tulostaaksesi TCP tai Socket tulostimeen, sinun t盲ytyy antaa tulostimen "
+"verkkonimi tai IP-osoite ja tarvittaessa porttinumero (oletus: 9100). HP:n "
+"JetDirect tulostuspalvelimien portti on yleens盲 9100, muissa palvelimissa "
+"voi olla eri portti. Katso laitteistosi k盲sikirjaa."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "Hard drive information"
+msgstr "Kiintolevyn tiedot"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Russian"
+msgstr "Ven盲j盲"
#: ../../lang.pm:1
#, c-format
-msgid "Portugal"
-msgstr "Portugali"
+msgid "Jordan"
+msgstr "Jordania"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Palestine"
-msgstr "Palestiina"
+msgid "Hide files"
+msgstr "Piilota tiedostot"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Tunnista automaattisesti t盲h盲n koneeseen liitetyt tulostimet"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV ei ole asennettuna!\n"
+"\n"
+"\n"
+"Jos sinulla on TV-kortti, mutta DrakX ei tunnistanut sit盲 (ei bttv eik盲 \n"
+"saa713 moduulia tiedostossa \"/etc/modules\") eik盲 asentanut xawtv:t盲, \n"
+"l盲het盲 \"lspcidrake -v -f\" tuloste osoitteeseen \"install\\@mandrakesoft."
+"com\n"
+"otsikolla \"undetected TV card\".\n"
+"\n"
+"\n"
+"Voit asentaa sen kirjoittamalla \"urpmi xawtv\" p盲盲k盲ytt盲j盲n盲 konsolissa."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre ja Miquelon"
+msgid "Sorry, no floppy drive available"
+msgstr "Valitan, levykeasemaa ei l枚ydy"
#: ../../lang.pm:1
#, c-format
-msgid "Poland"
-msgstr "Puola"
+msgid "Bolivia"
+msgstr "Bolivia"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Aseta Windows-palvelimesi jakamaan tulostinta IPP protokollan kautta ja "
+"aseta tulostaminen t盲st盲 koneesta k盲ytt盲en \"%s\" yhteystapaa Printerdrake:"
+"ssa.\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Filippiinit"
+msgid "Bad package"
+msgstr "Viallinen paketti"
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Uusi-Guinea"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Muuta koneesi tehokkaaksi Linux palvelimeksi parilla hiiren n盲pp盲imen "
+"painalluksella: webbipalvelin, s盲hk枚posti, palomuuri, reititin, tiedosto- ja "
+"tulostuspalvelin, ..."
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Polynesia"
-msgstr "Ranskan Polynesia"
+msgid "DrakSec Basic Options"
+msgstr "DracSec perusoptiot"
-#: ../../lang.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Huomaa: Jos sinulla on ISA PnP 盲盲nikortti, sinun pit盲盲 k盲ytt盲盲 sndconfig "
+"ohjelmaa. Eli kirjoita \"sndconfig\" konsolissa."
#: ../../lang.pm:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Romania"
+msgstr "Romania"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "choose device"
+msgstr "valitse laite"
#: ../../lang.pm:1
#, c-format
-msgid "New Zealand"
-msgstr "Uusi-Seelanti"
+msgid "Canada"
+msgstr "Kanada"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Niue"
-msgstr "Niue"
+msgid "Remove from LVM"
+msgstr "Poista LVM:st盲"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "Timezone"
+msgstr "Aikavy枚hyke"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "German"
+msgstr "Saksa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "Next ->"
+msgstr "Seuraava ->"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
+"Ottamalla t盲m盲 k盲ytt枚枚n, sallit japaninkielisten tekstitiedostojen "
+"tulostaminen. K盲yt盲 t盲m盲 ainoastaan jos todellakin haluat tulostaa "
+"japaninkielinen teksti. Jos t盲m盲 on k盲yt枚ss盲 et voi en盲盲 tulostaa "
+"latinanfonttien erikoismerkkej盲 eik盲 asettaa marginaaleja, tekstikokoa, jne. "
+"T盲m盲 asetus koskee ainoastaan t盲ss盲 koneessa m盲盲ritettyj盲 tulostimia. Jos "
+"haluat tulostaa japaninkielinen teksti et盲koneessa olevalla tulostimella, "
+"sinun pit盲盲 asettaa t盲m盲 toimintosiin盲 koneessa."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkinsaari"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"On mahdollista, ett盲 t盲m盲 osio on\n"
+"ajuriosio. Sinun olisi kaiketi\n"
+"parasta j盲tt盲盲 se rauhaan.\n"
#: ../../lang.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Guinea-Bissau"
+msgstr "Guinea-Bissau"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Uusi-Kaledonia"
+msgid "Horizontal refresh rate"
+msgstr "Vaakavirkistystaajuus"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibia"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Ei voida poistaa liitospistett盲 koska osiota k盲ytet盲盲n loopback-tilassa.\n"
+"Poista loopback-tiedosto ensin"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Verkkoasetusta, joka tehtiin asennuksen aikana, ei voida k盲ynnist盲盲 nyt. Ole "
+"hyv盲 ja tarkista onko verkko k盲ytett盲viss盲 kun olet k盲ynnist盲nyt "
+"j盲rjestelm盲si uudelleen ja korjannut asetukset Mandraken Ohjauskeskuksessa, "
+"osassa \"Verkko & Internet\"/\"Yhteys\", ja aseta sen j盲lkeen tulostin, my枚s "
+"Mandraken Ohjauskeskuksessa, osassa \"Laitteisto\"/\"Tulostin\"."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "Malesia"
+msgid "USB controllers"
+msgstr "USB-ohjaimet"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Meksiko"
+msgid "What norm is your TV using?"
+msgstr "Mik盲 normia televisiosi k盲ytt盲盲?"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Type:"
+msgstr "Tyyppi:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldiivit"
+msgid "Share name"
+msgstr "Jakonimi"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
+msgid "enable"
+msgstr "ota k盲ytt枚枚n"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Otan yhteytt盲 Mandrake Linuxin sivustolle saadakseni listan olemassaolevista "
+"peilipalvelimista..."
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Ongelma k盲ynnistett盲ess盲 verkkoa uudelleen: \n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+# mat
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
+msgid "Remove the loopback file?"
+msgstr "Poista loopback-tiedosto?"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Selected size is larger than available space"
+msgstr "Valittu koko on suurempi kuin k盲ytett盲viss盲 oleva levytila"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Pohjoiset Mariaanit"
+msgid "NCP server name missing!"
+msgstr "NCP-palvelimen nimi puuttuu!"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
+msgid "Please choose your country."
+msgstr "Valitse maa jossa asut."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Hard Disk Backup files..."
+msgstr "Kiintolevyn varmuuskopiotiedostot..."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Laotian"
+msgstr "Latvia"
#: ../../lang.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "Makedonia"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "Marshallinsaaret"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Rstat-protokolla mahdollistaa verkkok盲ytt盲jille\n"
+"eri koneiden tilatietojen haun."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Luodaan asetettujen kuvanlukijoiden listaus uudelleen ..."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "Scanner"
+msgstr "Kuvanlukija"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Varoitus: n盲yt枚nohjaimesi testaaminen voi jumiuttaa tietokoneen"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Morocco"
-msgstr "Marocco"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"K盲ytt盲j盲tunnus saa sis盲lt盲盲 vain pieni盲 kirjaimia, numeroita, `-' ja `_'"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Libya"
-msgstr "Libya"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Latvia"
-msgstr "Latvia"
+msgid "Welcome To Crackers"
+msgstr "Tervetuloa murtautujat"
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
+msgid "Module options:"
+msgstr "Moduulin optiot:"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Lithuania"
-msgstr "Liettua"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "Turvaa verkkosi k盲ytt盲en Multi Network Firewall"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Go on without configuring the network"
+msgstr "Jatka asettamatta verkkoyhteytt盲"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Liberia"
-msgstr "Liberia"
+msgid "Abort"
+msgstr "Hylk盲盲"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid "No password prompt on %s at port %s"
+msgstr "Ei salasanakysely盲 kohteessa %s portissa %s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Valitse, jos haluat k盲ytt盲盲 ei-taaksekelautuvaa laitetta"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
+msgid "Usage of remote scanners"
+msgstr "Et盲koneiden kuvanlukijoiden k盲ytt枚"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
+msgid "\t-CDROM.\n"
+msgstr "\t-CD-ROM.\n"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Windows-osiosi on liian pirstoutunut, k盲ynnist盲 koneesi uudelleen, mene "
+"Windowsiin ja aja \"Levyn eheytys\" ensin, ja aloita Mandrake Linuxin "
+"asennus uudestaan sen j盲lkeen."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakstan"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norja)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cayman Islands"
-msgstr "Caymansaaret"
+msgid "Hard Disk Backup Progress..."
+msgstr "Kiintolevyn varmuuskopion edistyminen..."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
+msgid "Unable to fork: %s"
+msgstr "Prosessia %s ei voitu haarauttaa"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Korea"
-msgstr "Korea"
+msgid "Type: "
+msgstr "Tyyppi: "
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Pohjois)"
+msgid "<-- Edit Client"
+msgstr "<-- Muokkaa asiakasta"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts ja Nevis"
+msgid "no fonts found"
+msgstr "kirjasimia ei l枚ytynyt"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Comoros"
-msgstr "Komorit"
+msgid "Mouse"
+msgstr "Hiiri"
-#: ../../lang.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "not enough room in /boot"
+msgstr "ei tarpeeksi tilaa hakemistossa /boot"
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Kambodza"
+msgid "Choosing an arbitratry driver"
+msgstr "Summittaisen ajurin valinta"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstan"
+msgid "Host name"
+msgstr "Koneen nimi"
#: ../../lang.pm:1
#, c-format
-msgid "Kenya"
-msgstr "Kenia"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Japan"
-msgstr "Japani"
+msgid "the color of the progress bar"
+msgstr "edistymispalkin v盲ri"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Jordan"
-msgstr "Jordania"
+msgid "Suppress Fonts Files"
+msgstr "Poista kirjasintiedostot"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
+msgid "Add to RAID"
+msgstr "Lis盲盲 RAIDiin"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Islanti"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Voit lis盲t盲 ylim盲盲r盲isi盲 tietueita Yabootille, joko toisia k盲ytt枚-\n"
+"j盲rjestelmi盲, vaihtoehtoisia ytimi盲, tai h盲t盲tilan k盲ynnistyskuvan.\n"
+"\n"
+"Toisille k盲ytt枚j盲rjestelmille tietue sis盲lt盲盲 ainoastaan nimikkeen ja\n"
+"\"juuri\"-osion.\n"
+"\n"
+"Linuxille l枚ytyy pari lis盲optiota:\n"
+"\n"
+" * Nimike: t盲m盲 on vain se nimi joka sinun pit盲盲 kirjoittaa Yabootin\n"
+"kehotteessa valitaksesi t盲m盲n k盲ynnistysvaihtoehdon;\n"
+"\n"
+" * Kuva: t盲m盲 on k盲ynnistett盲v盲n ytimen nimi. Yleens盲 t盲m盲 on vmlinux\n"
+"tai vmlinux eri p盲盲tteill盲;\n"
+"\n"
+" * Juuri: t盲m盲 on\"juuri\"-laite, tai ``/'' Linux-asennuksellesi;\n"
+"\n"
+" * Lis盲盲: Applen laitteistoilla ytimen lis盲盲-optiota k盲ytet盲盲n monesti "
+"apuna\n"
+"videolaitteiston alustamisessa tai m盲盲ritt盲m盲盲n Applen vakiohiirist盲\n"
+"yleens盲 puuttuvan toisen ja kolmannen hiirin盲pp盲imen emuloinnin\n"
+"n盲pp盲imist枚ll盲 emuloiden. T盲ss盲 pari esimerkki盲:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: t盲t盲 optiota voidaan k盲ytt盲盲 alkuvaiheessa tarvittavien "
+"moduulien\n"
+"lataamiseen ennen kuin k盲ynnistyslaite on k盲ytett盲viss盲 tai virtuaalisen\n"
+"levykuvan lataamiseen muistiin h盲t盲tilanteissa.\n"
+"\n"
+" * Initrd:n koko: virtuaalilevyn vakiokoko on yleens盲 4096 tavua. Jos sinun\n"
+"tarvitsee m盲盲ritt盲盲 iso virtuaalilevy, voit k盲ytt盲盲 t盲t盲 optiota\n"
+"\n"
+" * Luku-kirjoitus: yleens盲 \"juuri\"-osio liitet盲盲n vain lukutilassa,\n"
+"jotta voidaan suorittaa tiedostoj盲rjestelm盲n tarkistus ennen\n"
+"kuin j盲rjestelm盲 siirtyy ``aktiiviseen'' tilaan. T盲ss盲 voit ohittaa\n"
+"oletukset k盲ytt盲m盲ll盲 t盲t盲 optiota;\n"
+"\n"
+" * Ei n盲ytt枚盲: jos Applen n盲yt枚nohjain sattuu olemaan eritt盲in\n"
+"ongelmallinen, voit valita t盲m盲n option k盲ynnist盲盲ksesi ``ei-n盲ytt枚盲''\n"
+"-tilaan, jossa on sis盲盲nrakennetun kehyspuskurin tuki;\n"
+"\n"
+" * Oletus: valitsee nykyisen tietueen Linuxin oletusvalinnaksi, joka "
+"voidaan\n"
+"valita vain painamalle ENTER Yabootin kehotteessa. T盲m盲 tietue on\n"
+"my枚s merkitty ``*'' jos painat [Tab] n盲hd盲ksesi k盲ynnistysvalinnat."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Iran"
-msgstr "Iran"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Tulostin \"%s\" lis盲ttiin Star Office/OpenOffice.org/GIMP k盲ytt枚枚n "
+"onnistuneesti."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "No floppy drive available!"
+msgstr "Ei levykeasemaa k盲ytett盲viss盲!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Brittil盲inen Intian valtameren alue"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Saadaksesi tietoja nykyisen tulostimen olemassa olevista optioista, lue joko "
+"alla n盲ytetty lista tai paina \"Tulostusparametrien lista\" painiketta.%s%s%"
+"s\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "India"
-msgstr "Intia"
+msgid "Continue anyway?"
+msgstr "Jatka joka tapauksessa?"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Israel"
-msgstr "Israel"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Jos tulostimesi ei ole listattu, valitse yhteensopiva (katso tulostimen "
+"ohjekirjasta) tai vastaava."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ireland"
-msgstr "Irlanti"
+msgid "Printer"
+msgstr "Tulostin"
#: ../../lang.pm:1
#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
+msgid "Saudi Arabia"
+msgstr "Saudi Arabia"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Unkari"
+msgid "Internet"
+msgstr "Internet"
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Some devices were added:\n"
+msgstr "Joitakin laitteita lis盲ttiin:\n"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Kroatia"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometria: %s sylinteri盲, %s lukup盲盲t盲, %s sektoria\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Printing on the printer \"%s\""
+msgstr "Tulostus k盲ynniss盲 tulostimella \"%s\""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard ja McDonaldinsaaret"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow ja /etc/hosts.deny on jo asetettu - ei muutoksia"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong Kong"
+msgid "Restore From Tape"
+msgstr "Palauta nauhalta"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "China"
-msgstr "Kiina"
+msgid "Choose the profile to configure"
+msgstr "Valitse profiili jonka haluat asettaa"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Sy枚t盲 Zeroconf konenimi ilman pistett盲 jos et \n"
+"halua k盲ytt盲盲 oletus koneenime盲."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
+msgid "Backup Now from configuration file"
+msgstr "Tee heti asetustiedoston varmuuskopio"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Liitospisteet saavat sis盲lt盲盲 vain kirjaimia ja numeroita"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Restarting printing system..."
+msgstr "K盲ynnist盲n tulostusj盲rjestelm盲盲 uudelleen..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Etel盲 Georgia ja Etel盲iset Sandwichsaaret"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Parametrit: (name)\n"
+"\n"
+"Lis盲盲 nimi jota msec:n salasanojen vanheneminen ei koske."
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guinea"
+msgid "See hardware info"
+msgstr "Katso laitteistotietoja"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "First sector of boot partition"
+msgstr "Ensimm盲inen sektori k盲ynnistysosiolla"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guinea"
-msgstr "Guinea"
+msgid "Printer manufacturer, model"
+msgstr "Tulostimen valmistaja, malli"
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambia"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Tulosta, 盲l盲 jonota"
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Gr枚nlanti"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIOT]...\n"
+"Mandrake Terminal Server Asetusty枚kalu\n"
+"--enable : ota MTS k盲ytt枚枚n.\n"
+"--disable : poista MTS k盲yt枚st盲.\n"
+"--start : k盲ynnist盲 MTS\n"
+"--stop : pys盲yt盲 MTS\n"
+"--adduser : lis盲盲 olemassaoleva k盲ytt盲j盲 MTS:盲盲n (tunnus vaaditaan)\n"
+"--deluser : poista olemassaoleva k盲ytt盲j盲 MTS:st盲 (tunnus vaaditaan)\n"
+"--addclient : lis盲盲 asiakaskone MTS:盲盲n (vaatii MAC osoitteet, IP, nbi "
+"kuvatiedoston nimi)\n"
+"--delclient : poista asiakaskone MTS:st盲 (vaatii MAC osoitteet, IP, nbi "
+"kuvatiedoston nimi)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Subnet Mask:"
+msgstr "Aliverkon peite:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo ja Bootsplash teemojen asennus onnistui."
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Ranska, Guayana"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Sinun tulee valita vaakavirkistystaajuus n盲yt枚llesi. Voit joko valita "
+"jonkin\n"
+"allaolevista alueista, jotka vastaavat teollisuusstandardityyppej盲 tai "
+"sy枚tt盲盲\n"
+"jonkin muun alueen.\n"
+"\n"
+"On HYVIN T脛RKE脛脛, ett盲 et valitse n盲ytt枚tyyppi盲, jonka "
+"vaakavirkistystaajuus\n"
+"on suurempi kuin oman n盲ytt枚si. Jos ep盲r枚it, valitse pienempi taajuus."
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Georgia"
-msgstr "Georgia"
+msgid "Modify"
+msgstr "Muokkaa"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenada"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Komennot \"%s\" ja \"%s\" sallivat my枚s mahdollisuuden muokata asetukset "
+"erityiselle tulostusty枚lle. Voit yksinkertaisesti lis盲t盲 halutut asetukset "
+"komentoriville, esim.: \"%s <tiedosto>\". \n"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "United Kingdom"
-msgstr "Iso-Britannia"
+msgid "Need hostname, username and password!"
+msgstr "Verkkoaseman nimi, tunnus ja salasana tarvitaan!"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV on protokolla, joka sallii sinun liitt盲盲 webbipalvelimen hakemisto\n"
+"paikallisesti, ja k盲ytt盲盲 sit盲 paikallisena tiedostoj盲rjestelm盲n盲 (olettaen "
+"ett盲\n"
+"webbipalvelimeen on asennettu WebDAV tuki). Jos haluat lis盲t盲 WebDAV\n"
+"-liitoskohdan, valitse \"Uusi\"."
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Faroe Islands"
-msgstr "F盲盲rsaaret"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Micronesia"
-msgstr "Mikronesia"
+msgid "new"
+msgstr "uusi"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandinsaaret"
+msgid "Would you like to try again?"
+msgstr "Haluatko kokeilla uudelleen?"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fiji"
+msgid "Wizard"
+msgstr "Velho"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Finland"
-msgstr "Suomi"
+msgid "Edit selected server"
+msgstr "Muokkaa valittua palvelinta"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ethiopia"
-msgstr "Etiopia"
+msgid "Please choose where you want to backup"
+msgstr "Valitse, mihin haluat tehd盲 varmuuskopiot"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Spain"
-msgstr "Espanja"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Sinun tulee k盲ynnist盲盲 j盲rjestelm盲 uudelleen jotta muutokset tulevat voimaan"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
+msgid "Do not include the browser cache"
+msgstr "脛l盲 sis盲llyt盲 selaimen v盲limuistia"
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Western Sahara"
-msgstr "L盲nsi-Sahara"
+msgid "Please, choose your keyboard layout."
+msgstr "Valitse n盲pp盲imist枚si asettelu."
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Egypt"
-msgstr "Egypti"
+msgid "Standard"
+msgstr "Vakio"
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Estonia"
-msgstr "Viro"
+msgid "Please choose your mouse type."
+msgstr "Valitse hiiren tyyppi."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
+msgid "Connect..."
+msgstr "Yhdist盲..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Algeria"
-msgstr "Algeria"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Tulostimen \"%s\" asetus ep盲onnistui!"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikaaninen tasavalta"
+msgid "not configured"
+msgstr "ei asetettu"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Dominica"
-msgstr "Dominica"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Denmark"
-msgstr "Tanska"
+msgid "About"
+msgstr "Tietoja"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Proxies configuration"
+msgstr "V盲lityspalvelimien asettaminen"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "Kypros"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "Joulusaari"
+msgid "Start: sector %s\n"
+msgstr "Alkaa: sektori %s\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
+msgid "Network interface already configured"
+msgstr "Verkkoliit盲nt盲 on jo asetettu"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Cuba"
-msgstr "Kuuba"
+msgid "Couldn't access the floppy!"
+msgstr "En voinut k盲ytt盲盲 levykett盲!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Colombia"
-msgstr "Kolumbia"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "yhdistet盲盲n Bugzilla velhoon ..."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Mail Server"
+msgstr "S盲hk枚postipalvelin"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Chile"
-msgstr "Chile"
+msgid "Please click on a partition"
+msgstr "Klikkaa osiota"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Cook Islands"
-msgstr "Cookinsaaret"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
+msgid "Have a nice day!"
+msgstr "Hyv盲盲 p盲iv盲njatkoa!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Switzerland"
-msgstr "Sveitsi"
+msgid "across Network"
+msgstr "verkon yli"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "Keski-Afrikan tasavalta"
+msgid "Upgrade %s"
+msgstr "P盲ivit盲 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
+msgid "Select Printer Connection"
+msgstr "Valitse tulostinyhteys"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kookossaaret"
+msgid "Scanning for TV channels in progress ..."
+msgstr "TV-kanavien haku k盲ynniss盲 ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Virhe tiedoston l盲hetyksess盲 k盲ytt盲en FTP:t盲.\n"
+"Ole hyv盲 ja korjaa FTP-asetuksesi."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "IP Range Start:"
+msgstr "IP-alueen alku:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Belarus"
-msgstr "Belarus"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet p盲盲palvelindemoni (yleens盲 inetd) k盲ynnist盲盲 useita eri\n"
+"Internetpalveluita tarpeen mukaan. Palvelin k盲ynnist盲盲 useita\n"
+"palveluita, kuten telnet, ftp, rsh ja rlogin. Inetd:n poistaminen\n"
+"poistaa my枚s n盲m盲 palvelut k盲yt枚st盲."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "the height of the progress bar"
+msgstr "edistymispalkin korkeus"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet'nsaari"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Tallenna %s kautta palvelimella: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
+msgid "Argentina"
+msgstr "Argentiina"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahama"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+" Hyv盲ksy / Hylk盲盲 kuulutetut icmp echo viestit."
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Brasilia"
+msgid "Domain Name Server"
+msgstr "Verkkoalueen nimipalvelin (DNS)"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
+msgid "Security Level:"
+msgstr "Turvataso:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
+msgid "Mount points must begin with a leading /"
+msgstr "Liitospisteiden pit盲盲 alkaa /-merkill盲."
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "Postfix Mail Server"
+msgstr "Postfix - postipalvelin"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid "Quit without saving"
+msgstr "Lopeta tallentamatta"
#: ../../lang.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Yemen"
+msgstr "Jemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "T盲m盲 tuote on saatavissa MandrakeStore:n webbisivustolla"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgaria"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Sy枚t盲 suurin sallittu koko\n"
+"Drakbackup-varmuuskopiolle"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> On monta asiaa, joista valita (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Hard drive detection"
+msgstr "Kiintolevyjen tunnistus"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Et ole valinnut yht盲k盲盲n pakettiryhm盲盲.\n"
+"Valitse haluamasi minimaalinen asennus"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia ja Herzegovina"
+msgid "Please enter the WebDAV server URL"
+msgstr "Anna WebDAV palvelimen osoite (URL)"
#: ../../lang.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaidzan"
+msgid "Tajikistan"
+msgstr "Tadzikistan"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "Accept"
+msgstr "Hyv盲ksy"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Australia"
-msgstr "Australia"
+msgid "Description"
+msgstr "Kuvaus"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Amerikan Samoa"
+msgid "Error opening %s for writing: %s"
+msgstr "Virhe kirjoitettaessa %2s tiedostoon %1s."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Argentina"
-msgstr "Argentiina"
+msgid "Mouse type: %s\n"
+msgstr "Hiiren tyyppi: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Valitse CD/DVD mediasi koko (Mt)"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Alankomaiden Antillit"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Salli 'su' vain 'wheel' ryhm盲盲n kuuluville j盲senille, tai salli komento "
+"kaikille."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Armenia"
-msgstr "Armenia"
+msgid "Expert Area"
+msgstr "Asiantuntijan alue"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albania"
+msgid "Choose a monitor"
+msgstr "Valitse monitori"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Empty label not allowed"
+msgstr "Tyhj盲盲 nimikett盲 ei sallita"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua and Barbuda"
+msgid "Maltese (UK)"
+msgstr "Malta (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "Arabiemiirikunnat"
+msgid "I can't add any more partition"
+msgstr "Uusia osioita ei voida lis盲t盲"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Size in MB: "
+msgstr "Koko Mt: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
+msgid "Remote printer"
+msgstr "Et盲tulostin"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Please choose a language to use."
+msgstr "Valitse k盲ytett盲v盲 kieli."
-#: ../../loopback.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ympyr盲-liitoksia %s\n"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"VAROITUS: T盲m盲 laite on aikaisemmin m盲盲ritelty Internetyhteyden "
+"muodostamiseen.\n"
+"Hyv盲ksy, jos haluat pit盲盲 laitteen asetukset sellaisina kuin ne olivat.\n"
+"Alla olevien kohtien muokkaaminen korvaa voimassa olevat asetukset."
-#: ../../lvm.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Poista loogiset osiot ensin\n"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Yksi k盲ytt盲j盲 voidaan asettaa kirjautumaan sis盲盲n automaattisesti "
+"tietokoneellesi."
-#: ../../modules.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Floppy format"
+msgstr "Levykkeen muoto"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA tuki ei en盲盲 l枚ydy 2.2-sarjan ytimist盲. K盲yt盲 2.4 ydint盲."
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "PY脰RIT脛 HIIREN RULLAA!"
+msgid "Generic Printers"
+msgstr "Yleiset tulostimet"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "Aktivoidaksesi hiiren,"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Valitse tulostin johon tulostusty枚t pit盲isi ohjata, tai sy枚t盲 laitteen tai "
+"tiedoston nimi sy枚teriville"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Testaa hiiri"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Kuvanlukijat t盲ss盲 koneessa ovat muiden koneiden k盲ytett盲viss盲"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Ei hiirt盲"
+msgid "First sector of the root partition"
+msgstr "Ensimm盲inen sektori juuriosiolla"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "none"
-msgstr "ei mik盲盲n"
+msgid "Alternative drivers"
+msgstr "Vaihtoehtoiset ajurit"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "3 buttons"
-msgstr "3 n盲pp盲int盲"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Valitse kaikki asetukset jotka tarvitset.\n"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 n盲pp盲int盲"
+msgid "Initrd"
+msgstr "Initrd"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 n盲pp盲in"
+msgid "Cape Verde"
+msgstr "Kap Verde"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "L枚ytyyk枚 t盲st盲 prosessorista Cyrix 6x86 Coma -virhe "
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Ensimm盲iset pentiumprosessorit olivat virheellisi盲 ja jumiutuivat "
+"purettaessa F00F tavukoodia"
+
+#: ../../lang.pm:1
#, c-format
-msgid "busmouse"
-msgstr "v盲yl盲hiiri"
+msgid "Guam"
+msgstr "Guam"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Valitse portti, johon tulostimesi on kytketty tai sy枚t盲 laitteen tai "
+"tiedoston nimi sy枚teriville"
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"
+msgid "/Options/Test"
+msgstr "/Asetukset/Testaa"
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"T盲t盲 tasoa tulee k盲ytt盲盲 varoen. Se tekee j盲rjestelm盲st盲si helpomman "
+"k盲ytt盲盲,\n"
+"mutta hyvin herk盲n: sit盲 ei tule k盲ytt盲盲 koneessa joka on kytketty muihin "
+"koneisiin\n"
+"tai Internetiin. Koneessa ei ole salasanoja."
-#: ../../mouse.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Mounting partition %s"
+msgstr "Liitet盲盲n osiota %s"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "User name"
+msgstr "K盲ytt盲j盲tunnus"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "New configuration (isdn-light)"
+msgstr "Uusi kokoonpano (isdn-kevyt)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Mille osiolle haluat laittaa Linux4Win:n?"
-#: ../../mouse.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Backup system"
+msgstr "Varmuuskopioi j盲rjestelm盲"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Test pages"
+msgstr "Testisivut"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Yleinen 3-n盲pp盲inen hiiri"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Lista palautettavista tiedoista:\n"
+"\n"
-#: ../../mouse.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Yleinen 2-n盲pp盲inen hiiri"
+msgid "Checking %s"
+msgstr "Tarkistetaan %s"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "serial"
-msgstr "sarja"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket -tulostimen parametrit"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Card mem (DMA)"
+msgstr "Kortin muisti (DMA)"
-#: ../../mouse.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Rulla"
+msgid "France"
+msgstr "Ranska"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Generic"
-msgstr "Yleinen"
+msgid "browse"
+msgstr "selaa"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Checking installed software..."
+msgstr "Tarkistan asennetut ohjelmistot..."
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Remote printer name missing!"
+msgstr "Et盲tulostimen nimi puuttuu!"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Yleinen PS2 rullahiiri"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Haluatko mahdollistaa tulostamisen paikallisverkon tulostimella?\n"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Turkey"
+msgstr "Turkki"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Standard"
-msgstr "Vakio"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Hiiri"
+msgid "Number of buttons"
+msgstr "Painikkeiden m盲盲r盲"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Vaihda tasaisen ja ryhm盲j盲rjestyksen v盲lill盲"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamilainen \"numerorivi\" QWERTY"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Sulje puu"
+msgid "Module"
+msgstr "Moduuli"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Laajenna puu"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Lis盲ksi jonoja, joita ei ole luotu t盲ll盲 ohjelmalla tai \"foomatic-configure"
+"\" komennolla, ei voida siirt盲盲."
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Info"
-msgstr "Tietoja"
+msgid "Hardware"
+msgstr "Laitteisto"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "Onko t盲m盲 oikein?"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl ja Alt n盲pp盲imet samanaikaisesti"
-#: ../../my_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "United States"
+msgstr "Yhdysvallat"
-#: ../../partition_table.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s"
+msgid "Default OS?"
+msgstr "Oletusk盲ytt枚j盲rjestelm盲?"
-#: ../../partition_table.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Huono varmuuskopiotiedosto"
+msgid "Swiss (German layout)"
+msgstr "Sveitsi (Saksalainen j盲rjestys)"
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Palautus tiedostosta %s ep盲onnistui: %s"
+msgid "Configure all heads independently"
+msgstr "Aseta kaikki n盲yt枚t erikseen"
-#: ../../partition_table.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-"Sinulla on reik盲 osiotaulussasi eik盲 sit盲 voida k盲ytt盲盲.\n"
-"Ainoa ratkaisu on siirt盲盲 prim盲盲riosioita siten ett盲 reik盲 on ennen "
-"laajennettuja osioita"
+"Ole hyv盲 ja valitse tulostin jota haluat asettaa. Tulostimen asetukset "
+"m盲盲ritet盲盲n automaattisesti. Jos tulostintasi ei tunnistettu oikein tai jos "
+"haluat r盲盲t盲l枚idyt tulostinasetukset valitse \"Manuaalinen asettaminen\"."
-#: ../../partition_table.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Laajennettua osiotyyppi盲 ei ole tuettu t盲ss盲 ymp盲rist枚ss盲"
+msgid "NTP Server"
+msgstr "NTP-palvelin"
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "liitt盲minen ep盲onnistui: "
+msgid "Load/Save on floppy"
+msgstr "Lataa/Tallenna levykkeelle"
-#: ../../pkgs.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "maybe"
-msgstr "ehk盲"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "T盲lle teemalle ei olemassa yht盲盲n bootsplashia kohdassa %s !"
#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "hyv盲"
-#: ../../pkgs.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "very nice"
-msgstr "eritt盲in hyv盲"
+msgid "Leaving in %d seconds"
+msgstr "Poistutaan %d sekunnin j盲lkeen"
-#: ../../pkgs.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "important"
-msgstr "t盲rke盲"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Valitse sarjaportti, johon modeemisi on kytketty."
-#: ../../pkgs.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "must have"
-msgstr "pakollinen"
+msgid "Country"
+msgstr "Maa"
-#: ../../raid.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei riitt盲v盲sti osioita RAID tasolle %d\n"
+msgid "Property"
+msgstr "Ominaisuus"
-#: ../../raid.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid ep盲onnistui"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../raid.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ep盲onnistui (ehk盲 raidtools puuttuu?)"
+msgid "LAN Configuration"
+msgstr "L盲hiverkon asetukset"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "En voi lis盲t盲 osiota _alustetulle_ RAID:lle md%d"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Stop"
-msgstr "Pys盲yt盲"
+msgid "Path or Module required"
+msgstr "Hakemisto tai moduuli vaaditaan"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Start"
-msgstr "K盲ynnist盲"
+msgid "Advanced Options"
+msgstr "Lis盲valinnat"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "On boot"
-msgstr "K盲ynnistyksen yhteydess盲"
+msgid "Coma bug"
+msgstr "Coma-virhe"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-"Ei lis盲tietoja\n"
-"t盲lle palvelulle, valitan."
+"T盲ss盲 vaiheessa sinun pit盲盲 m盲盲ritt盲盲 mitk盲 osiot k盲ytet盲盲n Mandrake\n"
+"Linux -j盲rjestelm盲si asennuksessa. Jos osioita on jo m盲盲ritelty, joko\n"
+"edellisest盲 GNU/Linux-asennuksesta tai jonkun toisen osiointity枚kalun\n"
+"tekemi盲, niin voit k盲ytt盲盲 olemassa olevia osioita. Muussa tapauksissa\n"
+"osiot pit盲盲 luoda.\n"
+"\n"
+"Luodaksesi osioita, sinun pit盲盲 ensin valita kovalevy. Voit valita "
+"osioitavan\n"
+"levyn painamalla 'hda' ensimm盲iselle IDE-levylle, 'hdb' toiselle, 'sda'\n"
+"ensimm盲iselle SCSI-levylle ja niin edelleen.\n"
+"\n"
+"Osioidaksesi valitun levyn voit valita n盲ist盲 vaihtoehdoista:\n"
+"\n"
+" * \"%s\": t盲m盲 toiminto poistaa kaikki osiot kovalevyll盲;\n"
+"\n"
+" * \"%s\": t盲m盲 toiminto luo automaattisesti\n"
+"tarvittavat ext3-osiot ja sivutusosion levyn tyhj盲st盲 tilasta;\n"
+"\n"
+"\"%s\": n盲ytt盲盲 seuraavat lis盲toiminnot:\n"
+"\n"
+" * \"%s\": tallentaa osiotaulun levykkeelle. T盲m盲 on\n"
+"hy枚dyllinen levyke, jos pit盲盲 palauttaa osiotaulu. Suosittelemme\n"
+"t盲m盲n levykkeen tekoa;\n"
+"\n"
+" * \"%s\": palauttaa aikaisemmin tallennetun osiotaulun\n"
+"levykkeelt盲;\n"
+"\n"
+" * \"%s\": jos osiotaulusi on viottunut, voit kokeilla sen\n"
+"korjaamista t盲ll盲 toiminnolla. Ole varovainen, ja muista ett盲 t盲m盲\n"
+"voi ep盲onnistua;\n"
+"\n"
+" * \"%s\": hylk盲盲 kaikki tekem盲si muutokset ja\n"
+"palauta alkuper盲inen osiotaulu;\n"
+"\n"
+" * \"%s\": t盲m盲n valinnan\n"
+"poistaminen pakottaa k盲ytt盲j盲t itse liitt盲m盲盲n ja irrottamaan vaihdettavat\n"
+"mediat, esim. levykkeet ja cd-levyt.\n"
+"\n"
+" * \"%s\": valitse t盲m盲 vaihtoehto jos haluat velhon osioimaan\n"
+"kovalevysi. T盲m盲 on suositeltua sinulle jos osiointi ei ole tuttua;\n"
+"\n"
+" * \"%s\": t盲m盲 vaihtoehto poistaa tekem盲si muutokset;\n"
+"\n"
+" * \"%s\": sallii lis盲toimintoja\n"
+"osioille (tyyppi, optiot, formaatti) ja n盲ytt盲盲 lis盲tietoja;\n"
+"\n"
+" * \"%s\": kun kovalevyn osiointi on valmis, t盲m盲 toiminto tallentaa\n"
+"tekem盲si muutokset levylle ja jatkaa asennusta.\n"
+"\n"
+"Kun m盲盲rit盲t osion kokoa, voit hienos盲盲t盲盲 kokoa k盲ytt盲m盲ll盲\n"
+"n盲pp盲imist枚n nuolin盲pp盲imi盲.\n"
+"\n"
+"Huom!: Voit my枚s k盲ytt盲盲 kaikkia toimintoja n盲pp盲imist枚ll盲. Siirry osioiden\n"
+"ja toimintojen v盲lill盲 k盲ytt盲m盲ll盲 [Tab] ja [Yl枚s/Alas] nuolin盲pp盲imi盲.\n"
+"\n"
+"Kun osio tai tyhj盲 tila on valittu voit k盲ytt盲盲:\n"
+"\n"
+" * Ctrl-C luodaksesi uuden osion (kun tyhj盲 tila on valittu);\n"
+"\n"
+" * Ctrl-D poistaaksesi osion;\n"
+"\n"
+" * Ctrl-M valitaksesi liitospisteen.\n"
+"\n"
+"Saadaksesi lis盲tietoja k盲ytett盲viss盲 olevista tiedostoj盲rjestelmist盲, lue\n"
+"lis盲盲 osasta ext2FS ``Reference Manual'':sta.\n"
+"\n"
+"Jos olet asentamassa PPC-koneelle, sinun pit盲盲 luoda pieni HFS\n"
+"``bootstrap''-osio kooltaan v盲hint盲盲n 1Mt, joka tulee Yaboot k盲ynnistys-\n"
+"lataajan k盲ytt枚枚n. Jos p盲盲t盲t tehd盲 osiosta v盲h盲n suuremman, esimerkiksi\n"
+"50Mt, voi olla hyv盲 ajatus asentaa ylim盲盲r盲inen ydin ja ramdisk-kuva\n"
+"virhetilanteiden k盲ynnistystarpeeseen."
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Palvelut ja demonit"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"N盲yt枚nohjain\n"
+"\n"
+" Asennusohjelma yleens盲 tunnistaa ja asettaa koneeseesi asennetun\n"
+"n盲yt枚nohjaimen. Mik盲li t盲m盲 ei onnistunut, voit itse valita oikean mallin\n"
+"listasta omistamasi kortin mukaisesti.\n"
+"\n"
+" Mik盲li eri palvelimia on k盲ytett盲viss盲 kortillesi, 3D tuella vai ilman,\n"
+"sinua pyydet盲盲n valitsemaan palvelin joka vastaa tarpeitasi."
-#: ../../services.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "pys盲htynyt"
+msgid "There was an error installing packages:"
+msgstr "Tapahtui virhe asennettaessa paketteja:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "k盲ynniss盲"
+msgid "Lexmark inkjet configuration"
+msgstr "Lexmark inkjetin asettaminen"
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Valitse mitk盲 palvelut k盲ynnistet盲盲n automaattisesti koneen k盲ynnistyksen "
-"yhteydess盲"
+msgid "Undo"
+msgstr "Peruuta"
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Tietokantapalvelin"
+msgid "Save partition table"
+msgstr "Tallenna osiotaulu"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Et盲hallinta"
+msgid "Finnish"
+msgstr "Suomi"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File sharing"
-msgstr "Tiedostojen jako"
+msgid "Macedonia"
+msgstr "Makedonia"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Internet"
-msgstr "Internet"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"K盲ytt盲j盲kohtainen jako k盲ytt盲盲 ryhm盲盲 \"fileshare\".\n"
+"Voit k盲ytt盲盲 UserDrakea lis盲t盲ksesi k盲ytt盲ji盲 t盲h盲n ryhm盲盲n."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printing"
-msgstr "Tulostus"
+msgid "Slovenian"
+msgstr "Slovenia"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "K盲ynnist盲盲 X-kirjasinpalvelimen (pakollinen, jos haluat ajaa XFree:t盲)"
+msgid "Libya"
+msgstr "Libya"
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Lataa usb-laitteiden ajurit."
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Asetan komentotiedostot, asennan ohjelmistot, k盲ynnist盲n palvelimet..."
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"\n"
+"- Burn to CD"
msgstr ""
-"Syslog on tapa jolla monet palvelut kirjottavat viestins盲 talteen\n"
-"useisiin lokitiedostoihin. On j盲rkev盲盲 k盲ytt盲盲 syslog-ohjelmaa."
+"\n"
+"- Polta CD:lle"
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "K盲ynnist盲 盲盲nij盲rjestelm盲 tietokoneessasi"
+msgid "Table"
+msgstr "Taulukko"
-#: ../../services.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho-protokollalla et盲k盲ytt盲j盲t voivat listata kaikki\n"
-"koneella olevat k盲ytt盲j盲t (vastaa fingeri盲)."
+msgid "I don't know how to format %s in type %s"
+msgstr "en osaa alustaa %s:盲盲 tyyppi盲 %s"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers-protokolla antaa verkon k盲ytt盲jille mahdollisuuden\n"
-"tunnistaa, ketk盲 ovat kirjautuneina eri koneissa."
+msgid "Model"
+msgstr "Malli"
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-"Rstat-protokolla mahdollistaa verkkok盲ytt盲jille\n"
-"eri koneiden tilatietojen haun."
+"Parametrit: (arg)\n"
+"\n"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 libsafe jos se l枚ytyy j盲rjestelm盲st盲."
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed-palvelin mahdollistaa automaattiset IP-reititystaulun p盲ivitykset\n"
-"RIP-protokollalla. Vaikka RIP-protokolla on paljon k盲ytetty pieniss盲\n"
-"verkoissa, monimutkaisemmat verkot vaativat parempia reititysprotokollia."
+msgid "Stop Server"
+msgstr "Pys盲yt盲 palvelin"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-"M盲盲r盲盲 raakalaitteet lohkolaitteiksi (kuten kiintolevyn osiot)\n"
-"tietyn tyyppisten sovellusten, kuten Oracle tai DVD-soitin, k盲ytt枚枚n"
+"\n"
+"Valitse lilo:n ja \n"
+"bootsplash:n teema,\n"
+"voit valita ne erikseen."
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Tallentaa ja palauttaa j盲rjestelm盲n satunnaislukualtaan, t盲m盲\n"
-"parantaa satunnaislukujen laatua."
+msgid "Modem"
+msgstr "Modeemi"
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
-"Postfix on s盲hk枚postin siirtoagentti, eli ohjelma joka v盲litt盲盲 postia "
-"koneelta toiselle."
+"Parametrit: (arg, listen_tcp=None)\n"
+"\n"
+"Salli / Est盲 X-yhteydet. Ensimm盲inen arg m盲盲r盲盲 mit盲 tehd盲盲n\n"
+"asiakaspuolella: ALL (kaikki yhteydet sallitaan), LOCAL (ainoastaan\n"
+"paikalliset yhteydet) ja NONE (ei yhteytt盲)."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper hallitsee RPC-yhteyksi盲, joita k盲ytt盲v盲t esimerkiksi\n"
-"NFS ja NIS-protokollat. Portmap-palvelin on oltava k盲ynniss盲\n"
-"j盲rjestelmiss盲 jotka haluavat tarjota n盲it盲 protokollia."
+msgid "Tuvalu"
+msgstr "Tuvalu"
+
+#: ../../help.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Use auto detection"
+msgstr "K盲yt盲 automaattista tunnistusta"
#: ../../services.pm:1
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
-"PCMIA tukea k盲ytet盲盲n yleens盲 kannettavissa ethernet- ja modeemi-\n"
-"korttien tukemiseen. Palvelu ei k盲ynnisty ellei sit盲 ole asetettu, joten\n"
-"sen voi asentaa my枚s koneisiin jotka eiv盲t sit盲 tarvitse."
+"GPM lis盲盲 hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
+"Commanderiin. GPM mahdollistaa my枚s leikkaa/liimaa toiminnot hiirell盲,\n"
+"ja sis盲lt盲盲 tuen valikoille konsolissa."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Tuki OKI 4w -yhteensopiville Windows-tulostimille."
+msgid "Started on boot"
+msgstr "K盲ynnistetty koneen k盲ynnist盲misen yhteydess盲"
-#: ../../services.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-"Asettaa k盲ynnistyksess盲 numlock-n盲pp盲inlukitsimen p盲盲lle\n"
-"sek盲 konsolille ett盲 XFree:lle."
+"Liity MandrakeSoft tukiryhm盲盲n ja Linux Yhteis枚枚n verkossa jakaaksesi "
+"tiet盲myst盲si ja auttaaksesi muita tulemalla tunnistetuksi asiantuntijaksi "
+"online teknisen tuen webbisivustossa:"
-#: ../../services.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. T盲m盲 palvelu mahdollistaa NSF-tiedostolukot."
+"Seuraavat optiot voidaan asettaa j盲rjestelm盲si turvallisuuden \n"
+"r盲盲t盲l枚intiin. Jos tarvitset selityksi盲, katso apuvinkit.\n"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. T盲m盲 palvelu mahdollistaa NFS-palvelimen\n"
-"k盲ynnistyksen, jakoa ohjataan tiedostosta /etc/exports."
+msgid "Automatically find available printers on remote machines"
+msgstr "Etsi k盲ytett盲viss盲 olevia tulostimia et盲koneista automaattisesti"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
-"Aktivoi/Poistaa kaikki verkkoliittym盲t jotka on asetettu\n"
-"k盲ynnistyksess盲."
+"\n"
+"- Tallenna nauhalle laitteessa: %s"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Liitt盲盲 ja irroittaa NFS (Network File System), SMB (Lan\n"
-"Manager/Windows) ja NCP (NetWare) liitospisteet"
+msgid "East Timor"
+msgstr "It盲-Timor"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on nimipalvelin (DNS) jota k盲ytet盲盲n muunnettaessa koneiden "
-"verkkonimi盲 IP-osoitteiksi."
+msgid "Del profile..."
+msgstr "Poista profiili..."
-#: ../../services.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-"Linux Virtual Server, jonka avulla voidaan rakentaa suuritehoinen\n"
-"korkean k盲ytett盲vyyden palvelin."
+"Parametrit: (arg)\n"
+"\n"
+"Salli / Est盲 j盲rjestelm盲n k盲ytt盲jien listaus n盲yt枚nhallinnassa (kdm ja gdm)."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
-"lpd on palvelin joka jakaa tulostust枚it盲 kirjoittimille."
+msgid "Installing Foomatic..."
+msgstr "Asennan Foomatic..."
-#: ../../services.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf j盲rjest盲盲 joskus aikaa erilaisten teht盲vien hoitamiseen\n"
-"k盲ynnistyksen aikana pit盲盲kseen yll盲 j盲rjestelm盲n asetuksia."
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Kirjaudu ulos ja k盲yt盲 sen j盲lkeen Ctrl-Alt-Askelpalautin"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automaattinen uuden laitteiston havaitseminen ja asettaminen "
-"k盲ynnistett盲ess盲."
+msgid "detected"
+msgstr "l枚ydetty"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automaattinen ytimen otsikkotiedoston korjaus /boot-hakemistossa "
-"tiedostolle\n"
-"/usr/include/linux/{autoconf,versio}.h"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Verkko pit盲盲 k盲ynnist盲盲 uudelleen. Haluatko tehd盲 sen nyt ?"
-#: ../../services.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paketti lataa valitun n盲pp盲inkartan /etc/sysconfig/keyboard\n"
-"tiedoston asetusten mukaisesti. Asetukset voidaan valita kbdconfig "
-"ty枚kalulla.\n"
-"T盲m盲 tulisi ottaa k盲ytt枚枚n l盲hes kaikissa j盲rjestelmiss盲."
+msgid "Package: "
+msgstr "Paketti: "
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"K盲ynnist盲 pakettifiltteri Linux 2.2-sarjalle, jos haluat\n"
-"pystytt盲盲 palomuurin suojaamaan konettasi verkkohy枚kk盲yksilt盲."
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "En voi kirjoittaa /etc/sysconfig/bootsplash."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet p盲盲palvelindemoni (yleens盲 inetd) k盲ynnist盲盲 useita eri\n"
-"Internetpalveluita tarpeen mukaan. Palvelin k盲ynnist盲盲 useita\n"
-"palveluita, kuten telnet, ftp, rsh ja rlogin. Inetd:n poistaminen\n"
-"poistaa my枚s n盲m盲 palvelut k盲yt枚st盲."
+msgid "SECURITY WARNING!"
+msgstr "TURVAVAROITUS!"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on WWW-palvelin. Palvelinta k盲ytet盲盲n jakamaan HTML-\n"
-"tiedostoja ja ajamaan CGI-ohjelmia."
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake etsii uutta laitteistoa ja mahdollisesti konfiguroi\n"
-"uuden/muuttuneen laitteiston."
+msgid "No, I don't want autologin"
+msgstr "Ei, en halua automaattista sis盲盲nkirjautumista"
-#: ../../services.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM lis盲盲 hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
-"Commander. GPM mahdollistaa my枚s leikkaa/liimaa toiminnot hiirell盲,\n"
-"ja sis盲lt盲盲 tuen valikoille konsolissa."
+msgid "Windows Migration tool"
+msgstr "Windowsista siirtymisen ty枚kalu"
-#: ../../services.pm:1
+# Asennuksen sivuvalikko
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIX:n perusohjelma joka ajaa m盲盲riteltyj盲 ohjelmia m盲盲r盲tyill盲\n"
-"ajanhetkill盲. vixie cron lis盲盲 monia omianisuuksia verrattuna normaaliin\n"
-"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."
+msgid "All languages"
+msgstr "Kaikki kielet"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ajaa komentoja m盲盲r盲tyill盲 ajanhetkill盲, jotka on m盲盲ritelty at-komennolla.\n"
-"Ajaa my枚s er盲ajoja, kun j盲rjestelm盲n kuormitus on riitt盲v盲n matala."
+msgid "Removing %s"
+msgstr "Poistetaan %s"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Testing your connection..."
+msgstr "Testaan yhteytt盲si..."
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Cache size"
+msgstr "V盲limuistin koko"
+
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
-"apmd:ta k盲ytet盲盲n valvomaan paristojen tilaa ja raportoimaan siit盲 syslogin\n"
-"kautta. apmd:t盲 voidaan my枚s k盲ytt盲盲 sulkemaan kone patterien ollessa tyhji盲."
+"Salasanat ovat nyt k盲yt枚ss盲, mutta koneen k盲ytt枚 verkossa ei ole suositeltua."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron on ajoitettujen komentojen ajastaja."
+msgid "Start sector: "
+msgstr "Aloitussektori: "
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "K盲ynnist盲 ALSA (Advanced Linux Sound Architecture) 盲盲nij盲rjestelm盲"
+msgid "Congo (Brazzaville)"
+msgstr "Kongo (Brazzaville)"
-#: ../../standalone.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Asennan paketteja..."
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Paketti %s pit盲盲 asentaa. Haluatko asentaa sen?"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Seychelles"
+msgstr "Seychellit"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
+"Printerdrake on verrannut tulostimen automaattitunnistuksesta saatuja "
+"tietoja tulostintietokannassa oleviin tietoihin l枚yt盲盲kseen sopivimman "
+"mallin. Valinta voi olla v盲盲r盲, varsinkin jos tulostimesi ei l枚ydy "
+"tietokannasta. Varmista ett盲 valinta on oikea, ja paina \"Malli on oikea\", "
+"tai jos valinta on v盲盲r盲 paina \"Valitse malli manuaalisesti\", jolloin voit "
+"valita tulostinmallisi itse seuraavassa ruudussa.\n"
"\n"
-"K盲ytt枚: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Tulostimellesi Printerdrake on l枚yt盲nyt:\n"
+"\n"
+"%s"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] n盲ytt枚\n"
-" XFdrake tarkkuus"
+msgid "Bad password on %s"
+msgstr "Virheellinen salasana kohteessa %s"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"\n"
+"L枚ytyy yksi tuntematon tulostin joka on kytketty suoraan koneeseesi"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTIO]...\n"
-" --no-confirmation 盲l盲 pyyd盲 varmistusta MandrakeUpdate tilassa.\n"
-" --no-verify-rpm 盲l盲 tarkista pakettien allekirjoitusta\n"
-" --changelog-first n盲yt盲 muutosloki ennen tiedostolistausta "
-"kuvausikkunassa\n"
-" --merge-all-rpmnew ehdota kaikkien .rpmnew/.rpmsave tiedostojen "
-"yhdist盲mist盲"
+msgid "Zambia"
+msgstr "Zambia"
-#: ../../standalone.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Security Administrator (login or email)"
+msgstr "Tietoturvan yll盲pit盲j盲 (tunnus tai s盲hk枚posti)"
-#: ../../standalone.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIOT]\n"
-"Verkko & Internet yhteys- ja seurantasovellus\n"
-"\n"
-"--defaultintf liitynt盲 : n盲yt盲 t盲m盲 liitynt盲 oletuksena.\n"
-"--connect : avaa yhteyden Internettiin jos sit盲 ei ole.\n"
-"--disconnect : sulkee yhteyden Internettin jos se on olemassa.\n"
-"--force : k盲yt盲 (dis)connect:in kanssa : pakota yhteyden avaus/sulkeminen.\n"
-"--status : palauttaa 1 jos yhteys on avattu, muuten 0, ja poistuu.\n"
-"--quiet : ei-interaktiivinen tila. K盲ytet盲盲n (dis)connect:in kanssa."
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "Valitamme, tuemme ainoastaan 2.4 ytimi盲."
-#: ../../standalone.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Romanian (qwerty)"
+msgstr "Romania (QWERTY)"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "[keyboard]"
-msgstr "[n盲pp盲imist枚]"
+msgid "Under Devel ... please wait."
+msgstr "Kehityksen alla ... odota."
-#: ../../standalone.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIOT]...\n"
-"Mandrake Terminal Server Asetusty枚kalu\n"
-"--enable : ota MTS k盲ytt枚枚n.\n"
-"--disable : poista MTS k盲yt枚st盲.\n"
-"--start : k盲ynnist盲 MTS\n"
-"--stop : pys盲yt盲 MTS\n"
-"--adduser : lis盲盲 olemassaoleva k盲ytt盲j盲 MTS:盲盲n (tunnus vaaditaan)\n"
-"--deluser : poista olemassaoleva k盲ytt盲j盲 MTS:st盲 (tunnus vaaditaan)\n"
-"--addclient : lis盲盲 asiakaskone MTS:盲盲n (vaatii MAC osoitteet, IP, nbi "
-"kuvatiedoston nimi)\n"
-"--delclient : poista asiakaskone MTS:st盲 (vaatii MAC osoitteet, IP, nbi "
-"kuvatiedoston nimi)"
+msgid "Czech Republic"
+msgstr "Tsekin tasavalta"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Kirjasinten tuonti- ja valvontasovellus\n"
-"--windows_import : tuo kaikilta k盲ytett盲viss盲 olevilta windows-osioilta.\n"
-"--xls_fonts : n盲yt盲 kaikki olemassa olevat xls-kirjasimet\n"
-"--strong : vahva kirjasinten verifiointi.\n"
-"--install : hyv盲ksy mik盲 tahansa kirjasin ja hakemisto.\n"
-"--uninstall : poista mik盲 tahansa kirjasin tai kirjasinhakemisto.\n"
-"--replace : korvaa kaikki olemassaolevat kirjasimet.\n"
-"--application : 0 ei ohjelmistoa.\n"
-" : 1 kaikki olemassaolevat ohjelmistot tuettu.\n"
-" : ohjelmiston_nimi, eli so vastaa starofficea\n"
-" : ja gs vastaa ghostscripti盲."
+msgid "Egypt"
+msgstr "Egypti"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIOT] [OHJELMAN_NIMI]\n"
-"\n"
-"OPTIOT:\n"
-" --help - tulosta t盲m盲 viesti.\n"
-" --report - ohjelman pit盲isi olla yksi mandraken ty枚kaluista\n"
-" --incident - ohjelman pit盲isi olla yksi mandraken ty枚kaluista"
+msgid "Old configuration (isdn4net)"
+msgstr "Vanha kokoonpano (isdn4net)"
-#: ../../standalone.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Sound card"
+msgstr "脛盲nikortti"
+
+# Asennuksen sivuvalikko
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Import Fonts"
+msgstr "Kirjasinten tuonti"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Varmistus- ja palautussovellus\n"
-"\n"
-"--default : tallenna oletushakemistot.\n"
-"--debug : n盲yt盲 kaikki debuggaus-viestit.\n"
-"--show-conf : varmistettavien tiedostojen tai hakemistojen "
-"listaus.\n"
-"--config-info : selit盲 asetustiedoston optiot (k盲ytt盲jille ilman "
-"X).\n"
-"--daemon : k盲yt盲 demoni-asetukset. \n"
-"--help : n盲yt盲 t盲m盲 viesti.\n"
-"--version : n盲yt盲 versiotiedot.\n"
+"Sinulla on yksi suuri Microsoft Windows osio.\n"
+"Ehdotan ett盲 muutat ensimm盲iseksi osion kokoa\n"
+"(klikkaa osiota ja valitse sitten \"Uusi koko\")"
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Suppress Temporary Files"
+msgstr "Poista v盲liaikaistiedostot"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Change partition type"
+msgstr "Muuta osiotyyppi盲"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+"Resolution\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
msgstr ""
-"T盲m盲 ohjelma on ilmainen; voit levitt盲盲 ja/tai muokata sit盲 Free\n"
-"Software Foundationin julkaiseman 'GNU General Public License'\n"
-"-lisenssin mukaisesti; joko lisenssin version 2 mukaisesti, tai\n"
-"(niin halutessasi) mink盲 tahansa uudemman version mukaisesti.\n"
-"\n"
-"T盲m盲 ohjelma on julkaistu siin盲 toivossa, ett盲 se osoittautuisi\n"
-"hy枚dylliseksi, mutta ILMAN MINK脛脛NLAISTA TAKUUTA; ilman edes\n"
-"oletettua takuuta TUOTTEEN TOIMIVUUDESTA tai SOPIVUUDESTA \n"
-"TIETTYYN TEHT脛V脛脛N. Lis盲tietoja saat tutustumalla 'GNU General \n"
-"Public License' dokumentaatioon.\n"
+"N盲ytt枚tila\n"
"\n"
-"Hakemasi ohjelman mukana kuuluu tulla kopio 'GNU General Public License'\n"
-"dokumentaatiosta; jos n盲in ei ole, kirjoita Free Software Foundation,\n"
-"Inc.:lle osoitteeseen 59 Temple Place - Suite 330, Boston, MA 02111-1307\n"
-", USA.\n"
+" T盲ss盲 voit valita n盲ytt枚tilan ja v盲risyvyyden jota laitteistosi tukee.\n"
+"Valitse se joka parhaiten vastaa tarpeitasi (voit tietysti vaihtaa sit盲\n"
+"asennuksen j盲lkeenkin). Malli valitusta asetuksesta n盲ytet盲盲n n盲yt枚ss盲."
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Exit install"
-msgstr "Lopeta asennus"
+msgid "Network Options"
+msgstr "Verkko-optiot"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install updates"
-msgstr "Asenna p盲ivitykset"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"N盲ytt枚 teema\n"
+"konsolissa"
-#: ../../steps.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Configure services"
-msgstr "Palvelujen asettaminen"
+msgid "Statistics"
+msgstr "Tilastot"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Asenna X"
+msgid "(on %s)"
+msgstr "(%s:ssa)"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Lataajan asetus"
+msgid "MM Series"
+msgstr "MM Series"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Verkkoasetukset"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Kirjasto, joka suojelee puskurin ylivuoto- ja merkkijonon "
+"muotovirhehykk盲yksi盲 vastaan."
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add a user"
-msgstr "K盲ytt盲jien lis盲盲minen"
+msgid "average"
+msgstr "keskiarvo"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Root password"
-msgstr "P盲盲k盲ytt盲j盲n salasana"
+msgid "New printer name"
+msgstr "Uuden tulostimen nimi"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install system"
-msgstr "Asenna j盲rjestelm盲"
+msgid "Equatorial Guinea"
+msgstr "Guinea"
-#: ../../steps.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Asennettavien pakettien valinta"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Salli / Est盲 automaattinen sis盲盲nkirjautuminen."
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Format partitions"
-msgstr "Levyjen osiointi"
+msgid "Build Backup"
+msgstr "Tee varmuuskopio"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Osiointi"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Tulostaaksesi tiedoston komentorivilt盲 (p盲盲teikkunasta) k盲yt盲 komentoa \"%s "
+"<tiedosto>\" tai \"%s <tiedosto>\".\n"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "N盲pp盲imist枚n valinta"
+msgid "Currently, no alternative possibility is available"
+msgstr "Nykyhetkell盲 vaihtoehtoa ei ole olemassa"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Asennuksen luokka"
+msgid "Romanian (qwertz)"
+msgstr "Romania (qwertz)"
-#: ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Kiintolevyjen tunnistus"
+msgid "Write Config"
+msgstr "Kirjoita asetukset"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Hiiren m盲盲rittely"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Routed-palvelin mahdollistaa automaattiset IP-reititystaulun p盲ivitykset\n"
+"RIP-protokollalla. Vaikka RIP-protokolla on paljon k盲ytetty pieniss盲\n"
+"verkoissa, monimutkaisemmat verkot vaativat parempia reititysprotokollia."
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "License"
-msgstr "Lisenssi"
+msgid "Kiribati"
+msgstr "Kiribati"
-# Asennuksen sivuvalikko
-#: ../../steps.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Language"
-msgstr "Valitse kieli"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Salli / Est盲 root sis盲盲nkirjautuminen et盲yhteyksilt盲."
-#: ../../ugtk2.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid "Browse"
+msgstr "Selaa"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "CDROM"
+msgstr "CD-ROM"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Haluatko kokeilla Internetyhteytt盲 nyt?"
-#: ../../ugtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Belgian"
+msgstr "Belgia"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (n盲yt枚nohjaimen ajurin asennus)"
+msgid "Do you have an ISA sound card?"
+msgstr "Onko sinulla ISA-v盲yl盲盲n liitett盲v盲 盲盲nikortti?"
-#: ../../Xconfig/card.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
-"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa.\n"
-"HUOMAA, ETT脛 TUKI ON KOKEELLINEN JA VOI JUMIUTTAA TIETOKONEESI."
+"Ethernet-verkkokorttia ei l枚ytynyt j盲rjestelm盲st盲.\n"
+"En voi asentaa t盲m盲n tyyppist盲 yhteytt盲."
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KOKEELLISELLA laitteistokiihdytetyll盲 3D-tuella"
+msgid "Windows"
+msgstr "Windows "
-#: ../../Xconfig/card.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa."
+msgid "Can't make screenshots before partitioning"
+msgstr "Kuvakaappauksia ei voi tehd盲 ennen osiointia"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s laitteistokiihdytetyll盲 3D-tuella"
+msgid "Host Name"
+msgstr "Koneen nimi"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/Save _As"
+msgstr "/Tiedosto/Tallenna _nimell盲"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"HUOMAA, ETT脛 TUKI ON KOKEELLINEN JA VOI JUMIUTTAA TIETOKONEESI.\n"
-"Korttisi on tuettu my枚s XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
+"Saadaksesi k盲ytt枚枚si paikallisverkon CUPS-palvelimilla olevat tulostimet "
+"sinun tarvitsee vain valita \"Etsi automaattisesti et盲koneilla olevat "
+"tulostimet\" -valinta; CUPS-palvelimet kertovat koneellesi automaattisesti "
+"tulostimistaan. Kaikki koneesi tunnistamat tulostimet n盲kyv盲t \"Et盲tulostimet"
+"\" osassa Printerdraken p盲盲ikkunassa. Mik盲li CUPS-palvelin/palvelimet eiv盲t "
+"ole paikallisverkossa sinun t盲ytyy m盲盲ritt盲盲 IP-osoitteet ja tarpeen mukaan "
+"porttinumerot saadaksesi tulostintiedot palvelimilta."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"Korttisi on tuettu my枚s XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
+"%s ei l枚ytynyt kuvanlukija-tietokannasta, \n"
+"asetetaanko manuaalisesti?"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Delay before booting default image"
+msgstr "Viive ennen oletusj盲rjestelm盲n k盲ynnistyst盲"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Aseta vain kortin \"%s\"%s"
+msgid "Restrict command line options"
+msgstr "Rajoita komentorivioptioita"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "K盲yt盲 Xinerama-laajennusta"
+msgid "East Europe"
+msgstr "It盲-Eurooppa"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Aseta kaikki n盲yt枚t erikseen"
+msgid "Use free space"
+msgstr "K盲yt盲 tyhj盲盲 tilaa"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Mit盲 versiota XFree-palvelimesta haluat k盲ytt盲盲?"
+msgid "use dhcp"
+msgstr "k盲yt盲 dhpc:t盲"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "XFree configuration"
-msgstr "XFree:n asentaminen"
+msgid "Mail alert"
+msgstr "Postih盲lytys"
-#: ../../Xconfig/card.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Valitse n盲yt枚nohjaimen muistin m盲盲r盲"
+msgid "Internet configuration"
+msgstr "Internet-asetukset"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"J盲rjestelm盲si tukee usean n盲yt枚n laitteistokokoonpanoa.\n"
-"Mit盲 haluat tehd盲?"
+msgid "Uzbekistan"
+msgstr "Uzbekistan"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Usean n盲yt枚n asettaminen"
+msgid "Detected %s"
+msgstr "L枚ydetty %s"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose an X server"
-msgstr "Valitse X-palvelin"
+msgid "/Autodetect _printers"
+msgstr "/_Tulostimien automaattitunnistus"
-#: ../../Xconfig/card.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "X server"
-msgstr "X-palvelin"
+msgid "Finish"
+msgstr "Valmis"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 Mt tai enemm盲n"
+msgid "Show automatically selected packages"
+msgstr "N盲yt盲 automaattisesti valitut paketit"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "32 MB"
-msgstr "32 Mt"
+msgid "CPU flags reported by the kernel"
+msgstr "ytimen raportoimat prosessorin liput"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Togo"
+msgstr "Togo"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Jotain meni pieleen! - Onko mkisofs asennettu?"
#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 Mt"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 Mt"
+msgid "Please try again"
+msgstr "Yrit盲 uudelleen"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 Mt"
+msgid "The model is correct"
+msgstr "Malli on oikea"
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 Mt"
+msgid "FAT resizing failed: %s"
+msgstr "FAT-tiedostoj盲rjestelm盲n koon muuttaminen ep盲onnistui: %s"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 Mt"
+msgid "Individual package selection"
+msgstr "Yksitt盲isten pakettien valinta"
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kt"
+msgid "This partition is not resizeable"
+msgstr "T盲m盲n osion kokoa ei voi muuttaa"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kt"
+msgid "Location"
+msgstr "Sijainti"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"S盲ilyt盲 muutokset?\n"
-"Nykyiset asetukset ovat:\n"
-"\n"
-"%s"
+msgid "USA (cable-hrc)"
+msgstr "Yhdysvallat (hrc-kaapeli)"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Options"
-msgstr "Optiot"
+msgid "Journalised FS"
+msgstr "Journaloitu FS"
-#: ../../Xconfig/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test"
-msgstr "Kokeile"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resolution"
-msgstr "N盲ytt枚tila"
+msgid "This machine"
+msgstr "T盲m盲 kone"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "N盲ytt枚"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-asema: %s (vain arvaus)\n"
-#: ../../Xconfig/main.pm:1
-#, c-format
-msgid "Graphic Card"
-msgstr "N盲yt枚nohjain"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Valitse tiedostot tai hakemistot ja klikkaa 'Lis盲盲'"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Pystyvirkistystaajuus"
+msgid "Bahrain"
+msgstr "Bahrain"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Vaakavirkistystaajuus"
+msgid "omit scsi modules"
+msgstr "j盲t盲 pois scsi-moduulit"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Prosessoriperhe (esim. i686 luokka on 6)"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-"Sinun tulee valita vaakavirkistystaajuus n盲yt枚llesi. Voit joko valita "
-"jonkin\n"
-"allaolevista alueista, jotka vastaavat teollisuusstandardityyppej盲 tai "
-"sy枚tt盲盲\n"
-"jonkin muun alueen.\n"
-"\n"
-"On HYVIN T脛RKE脛脛, ett盲 et valitse n盲ytt枚tyyppi盲, jonka "
-"vaakavirkistystaajuus\n"
-"on suurempi kuin oman n盲ytt枚si. Jos ep盲r枚it, valitse pienempi taajuus."
+"Koska asennat k盲ytt枚j盲rjestelm盲盲 verkon yli, verkon asetukset on jo "
+"m盲盲ritelty.\n"
+"Paina OK s盲ilytt盲盲ksesi nykyiset asetukset tai peruuta asettaaksesi "
+"Internet- ja verkkoasetukset uudelleen.\n"
-#: ../../Xconfig/monitor.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Kytke ja K盲yt盲 -tunnistus ep盲onnistui. Ole hyv盲 ja valitse oikea n盲ytt枚"
+msgid "Keyboard layout: %s\n"
+msgstr "N盲pp盲inasettelu: %s\n"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Valmistaja"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"T盲盲ll盲 voit m盲盲ritt盲盲 mik盲li t盲h盲n koneeseen liitetyt tulostimien pit盲isi "
+"olla k盲ytett盲viss盲 et盲koneissa ja miss盲 et盲koneissa."
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Kytke ja K盲yt盲"
+msgid "Maltese (US)"
+msgstr "Malta (US)"
-#: ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Valitse monitori"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Liitt盲盲 ja irrottaa NFS (Network File System), SMB (Lan\n"
+"Manager/Windows) ja NCP (NetWare) liitospisteet"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "N盲yt枚nohjain: %s"
+msgid "Tvcard"
+msgstr "TV-kortti"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Valitse n盲ytt枚tila ja v盲rim盲盲r盲"
+msgid "Toggle between normal/expert mode"
+msgstr "Vaihda vakio-/asiantuntijatilan v盲lill盲"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Resolutions"
-msgstr "N盲ytt枚tilat"
+msgid "Size"
+msgstr "Koko"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardia v盲ri盲 (32 bitti盲)"
+msgid "GRUB"
+msgstr "GRUB"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoonaa v盲ri盲 (24 bitti盲)"
+msgid "Greenland"
+msgstr "Gr枚nlanti"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhatta v盲ri盲 (16 bitti盲)"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhatta v盲ri盲 (15 bitti盲)"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Ei oikein nimetty nauha. Nauhan nimike on: %s."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 v盲ri盲 (8 bitti盲)"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Internetyhteyden jakaminen on jo asetettu.\n"
+"Sen nykyinen tila on: k盲yt枚ss盲.\n"
+"\n"
+"Mit盲 haluat tehd盲?"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "Onko t盲m盲 oikea asetus?"
+msgid "Delete All NBIs"
+msgstr "Poista kaikki NBI:t"
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Poistutaan %d sekunnin j盲lkeen"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"T盲m盲 dialogi sallii k盲ynnistyslataajan hienos盲盲d枚n:\n"
+"\n"
+" * \"%s\": sinulla on kolme vaihtoehtoa:\n"
+"\n"
+" * \"%s\": jos pid盲t GRUB:sta (tekstipohjainen);\n"
+"\n"
+" * \"%s\": jos pid盲t LILO:n teksti-\n"
+"pohjaisesta k盲ytt枚liittym盲st盲.\n"
+"\n"
+" * \"%s\": jos pid盲t LILO:n graafisesta k盲ytt枚-\n"
+"liittym盲st盲;\n"
+"\n"
+" * \"%s\": useimmissa tapauksissa k盲yt盲t oletuslaitetta\n"
+"(\"%s\"), mutta k盲ynnistyslataaja voidaan my枚s asentaa toiselle\n"
+"kovalevylle (\"%s\"), tai jopa levykkeelle (\"%s\");\n"
+"\n"
+" * \"%s\": kun (uudelleen)\n"
+"k盲ynnist盲t tietokoneesi, t盲m盲 on viive jonka aikana k盲ytt盲j盲 voi\n"
+"k盲ynnistysvalikosta valita muun kuin oletustietueen.\n"
+"\n"
+"!! Huom! Jos j盲t盲t k盲ynnistyslataajan asentamatta (valitsemalla\n"
+"\"%s\"), sinun pit盲盲 varmistaa, ett盲 sinulla on keino k盲ynnist盲盲\n"
+"Mandrake Linux -j盲rjestelm盲si! Varmista my枚s, ett盲 tied盲t mit盲 olet\n"
+"tekem盲ss盲 ennen kuin muutat n盲it盲 asetuksia !!\n"
+"\n"
+"\"%s\"-painike t盲ss盲 valikossa mahdollistaa useat\n"
+"edistyneet vaihtoehdot, jotka ovat varattuja asiantuntijalle."
-#: ../../Xconfig/test.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Tapahtui virhe:\n"
-"%s\n"
-"Kokeile muuttaa joitakin asetuksia"
+"if set, send the mail report to this email address else send it to root."
+msgstr "jos asetettu, l盲het盲 raportit t盲h盲n osoitteeseen, muuten root saa ne."
-#: ../../Xconfig/test.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varoitus: n盲yt枚nohjaimesi testaaminen voi jumiuttaa tietokoneen"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Mit盲 versiota XFree-palvelimesta haluat k盲ytt盲盲?"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Haluatko kokeilla asetuksia?"
+msgid "More"
+msgstr "Lis盲盲"
-#: ../../Xconfig/test.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Kokeile asetuksia"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"T盲ll盲 turvatasolla t盲m盲n j盲rjestelm盲n k盲ytt枚 palvelimena on mahdollista.\n"
+"Turvallisuustaso on riitt盲v盲n korkea, jotta j盲rjestelm盲盲 voi k盲ytt盲盲 "
+"palvelimena,\n"
+"joka hyv盲ksyy monia yhteyksi盲 asiakaskoneilta. Huomaa: Jos koneesi on\n"
+"ainoastaan asiakaskone Internetiss盲, sinun kannattaisi valita alhaisempi "
+"turvataso."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Mik盲 normia televisiosi k盲ytt盲盲?"
+msgid "Account Password"
+msgstr "Salasana"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
"\n"
-"Do you have this feature?"
+"On which drive are you booting?"
msgstr ""
-"N盲ytt盲盲 silt盲 ett盲 n盲yt枚nohjaimessasi on TV-ulostuloliitin.\n"
-"Se voidaan asettaa toimimaan n盲ytt枚puskurin kanssa.\n"
-"\n"
-"Saadaaksesi t盲m盲n toimimaan, sinun pit盲盲 kytke盲 n盲yt枚nohjaimesi\n"
-"televisioon ennen kuin k盲ynnist盲t tietokoneesi. Valitse sitten \"TV-Out\"\n"
-"valinta k盲ynnistysvalikossa.\n"
+"P盲盲tit asentaa k盲ynnistyslataajan osioon.\n"
+"T盲m盲 viittaa siihen ett盲 sinulla on jo k盲ynnistyslataaja\n"
+"k盲ynnistys-kovalevyll盲si (esim. System Commander).\n"
"\n"
-"Onko sinulla t盲m盲 ominaisuus?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Tietokoneesi voidaan asettaa k盲ynnistym盲盲n automaattisesti graafiseen tilaan "
-"(XFree).\n"
-"Haluatko XFree:n k盲ynnistyv盲n automaattisesti?"
+"Mik盲 on sinun k盲ynnistys-kovalevy?"
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "Graafinen tila k盲ynnistyksess盲"
+msgid "Tajik keyboard"
+msgstr "Tajik-n盲pp盲imist枚"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ajuri: %s\n"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Voit kopioida tulostinasetukset jotka olet tehnyt %s jonolle nykyiseen %s "
+"jonoon. Kaikki asetustiedot (tulostimen nimi, kuvaus, sijainti, yhteystyyppi "
+"sek盲 vakioasetukset) kopioidaan, mutta tulostust枚it盲 ei siirret盲.\n"
+"Kaikkia tulostusjonoja ei voida siirt盲盲 seuraavista syist盲:\n"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 palvelin: %s\n"
+msgid "Font List"
+msgstr "Kirjasinlista"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "N盲ytt枚tila: %s\n"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Sinun pit盲盲 ehk盲 muuttaa Open Firmware -k盲ynnistyslaitetta\n"
+"aktivoidaksesi j盲rjestelm盲lataajan. Jos et n盲e j盲rjestelm盲lataajaa\n"
+"k盲ynnist盲ess盲si konettasi uudelleen, Paina Command-Option-O-F\n"
+"k盲ynnistyksen yhteydess盲 ja kirjoita:\n"
+"setenv boot-device %s,\\\\:tbxi\n"
+"kirjoita sitten: shut-down\n"
+"Seuraavalla k盲ynnistyskerralla sinun pit盲isi n盲hd盲 k盲ynnistyslataajan\n"
+"komentokehote."
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "V盲rim盲盲r盲: %s\n"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Sinulla on vanhanaikainen tai tuntematon tietokone,\n"
+"joten Yaboot j盲rjestelm盲nlataaja ei toimi koneessasi.\n"
+"Asennus jatkuu, mutta sinun t盲ytyy k盲ytt盲盲 BootX:盲盲\n"
+"koneesi k盲ynnist盲miseen"
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafiikkamuisti: %s kt\n"
+msgid "Select file"
+msgstr "Valitse tiedosto"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "N盲yt枚nohjain: %s\n"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"Valitse verkko tai kone jolle paikalliset tulostimet pit盲isi asettaa "
+"k盲ytett盲viksi:"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "N盲yt枚n virkistystaajuus: %s\n"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"N盲it盲 komentoja voit my枚s k盲ytt盲盲 monien ohjelmien tulostusdialogien "
+"\"Tulostuskomento\" kent盲ss盲, mutta t盲ss盲 sinun ei pid盲 m盲盲ritt盲盲 tiedoston "
+"nime盲 koska ohjelma m盲盲ritt盲盲 sen itse.\n"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "N盲yt枚n vaakajuovataajuus: %s\n"
+msgid "Japan"
+msgstr "Japani"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "N盲ytt枚: %s\n"
+msgid "Print option list"
+msgstr "Tulostusparametrien lista"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiiren laite: %s\n"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Muutos on tehty, mutta ottaaksesi sen k盲ytt枚枚n sinun pit盲盲 kirjoittautua ulos"
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiiren tyyppi: %s\n"
+msgid "Search servers"
+msgstr "Hae palvelimet"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "N盲pp盲inasettelu: %s\n"
+msgid "NCP queue name missing!"
+msgstr "NCP-jonon nimi puuttuu!"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Options: %s"
-msgstr "Optiot: %s"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
+"Varoitus, toinen Internetyhteys on havaittu, mahdollisesti k盲ytt盲en sinun "
+"verkkoasi"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Liitospiste: "
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM nimelt盲盲n \"%s\""
-#: ../../diskdrake/dav.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Server: "
-msgstr "Palvelin: "
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Tallentaa ja palauttaa j盲rjestelm盲n satunnaislukualtaan, t盲m盲\n"
+"parantaa satunnaislukujen laatua."
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Web-osoitteen tulee alkaa etuliitteell盲 'http://' tai 'https://'"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Tiedostoj盲rjestelm盲n %s tarkistus ep盲onnistui. Haluatko korjata virheet?\n"
+"(huomioi: voit menett盲盲 tietoja)"
-#: ../../diskdrake/dav.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Anna WebDAV palvelimen osoite (URL)"
+msgid "Turn your computer into a reliable server"
+msgstr "Muuta koneesi luotettavaksi palvelimeksi"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Liitospiste"
+msgid " (driver %s)"
+msgstr " (ajuri %s)"
-#: ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Server"
-msgstr "Palvelin"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
+"Loopback tiedosto(t):\n"
+" %s\n"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mount"
-msgstr "Liit盲"
+msgid "I don't know"
+msgstr "En tied盲"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Irroita"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP -palvelimella \"%s\", portissa %s"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "New"
-msgstr "Uusi"
+msgid ""
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
+"Olet asettamassa Automaattisen asennuksen levykett盲. T盲m盲 toiminto on aika "
+"vaarallinen ja sit盲 pit盲盲 k盲ytt盲盲 harkiten.\n"
+"\n"
+"T盲ll盲 ominaisuudella voit toistaa samanlaisen asennuksen jonka olet "
+"suorittanut t盲ss盲 koneessa, ja interaktiivinen asennus antaa sinun muuttaa "
+"ainoastaan paria kohtaa asennuksen aikana.\n"
+"\n"
+"Turvallisuuden maksimoimiseksi osiointia ja formatointia ei koskaan "
+"suoriteta automaattisesti, riippumatta siit盲 mit盲 valitsit t盲m盲n koneen "
+"asennuksen aikana.\n"
+"\n"
+"Haluatko jatkaa?"
-#: ../../diskdrake/dav.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"WebDAV on protokolla, joka sallii sinun liitt盲盲 webbipalvelimen hakemisto\n"
-"paikallisesti, ja k盲ytt盲盲 sit盲 paikallisena tiedostoj盲rjestelm盲n盲 (olettaen "
-"ett盲\n"
-"webbipalvelimeen on asennettu WebDAV tuki). Jos haluat lis盲t盲 WebDAV\n"
-"-liitoskohdan, valitse \"Uusi\"."
+"\n"
+"\n"
+"K盲yt盲t t盲ll盲 hetkell盲 ajuria %s\"%s\" (vakioajuri kortillesi on \"%s\")."
-#: ../../diskdrake/hd_gtk.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "K盲yt盲 sen sijaan ``%s'':盲盲"
+msgid "Post Uninstall"
+msgstr "Poistamisen j盲lkeiset toiminnot"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Type"
-msgstr "Tyyppi"
+msgid " ("
+msgstr " ("
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "K盲yt盲 ensin komentoa ``Irroita''"
+msgid "Cpuid level"
+msgstr "Cpuid-taso"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Delete"
-msgstr "Poista"
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolia (kyrillinen)"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Create"
-msgstr "Luo"
+msgid "Add a module"
+msgstr "Lis盲盲 moduuli"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tiedostoj盲rjestelmien tyypit:"
+msgid "Profile to delete:"
+msgstr "Valitse poistettava profiili:"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Empty"
-msgstr "Tyhj盲"
+msgid "Local measure"
+msgstr "Paikallinen mitta"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows "
+msgid "busmouse"
+msgstr "v盲yl盲hiiri"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Account Login (user name)"
+msgstr "K盲ytt盲j盲tunnus (k盲ytt盲j盲n nimi)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Fdiv bug"
+msgstr "Fdiv virhe"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Swap"
-msgstr "Sivutus"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall asetusty枚kalu\n"
+"\n"
+"Varmista ett盲 olet m盲盲ritt盲nyt verkkosi/Internetyhteytesi k盲ytt盲m盲ll盲\n"
+"drakconnect:a ennen kuin jatkat."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journaloitu FS"
+msgid "Benin"
+msgstr "Benin"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Yht盲k盲盲n kovalevy盲 ei l枚ytynyt"
+msgid "Path selection"
+msgstr "Polun valinta"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Klikkaa osiota"
+msgid "Name/IP address of host:"
+msgstr "Koneen nimi/IP-osoite:"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "N盲ytt枚: %s\n"
+
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Sinulla on yksi suuri Microsoft Windows osio.\n"
-"Ehdotan ett盲 muutat ensimm盲iseksi osion kokoa\n"
-"(klikkaa osiota ja valitse sitten \"Uusi koko\")"
+"Jotakin kamalaa on tapahtunut kiintolevyllesi.\n"
+"Tiedon oikeellisuuden tarkistus ep盲onnistui.\n"
+"T盲m盲 tarkoittaa ett盲 kaikki asemalle kirjoitettu\n"
+"tieto muuttuu tunnistamattomaksi."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Valitse toiminto"
+msgid "Printer host name or IP missing!"
+msgstr "Tulostinlaitteen verkkonimi tai osoite puuttuu!"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wizard"
-msgstr "Velho"
+msgid "Please check all users that you want to include in your backup."
+msgstr "Valitse kaikki ne k盲ytt盲j盲t, jotka haluat sis盲llytt盲盲 varmuuskopioosi."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Jos aiot k盲ytt盲盲 aboot:ia, varmista ett盲 j盲t盲t vapaata tilaa levyn alkuun\n"
-"(2048 sektoria on tarpeeksi)"
+"Kuvanlukija %s pit盲盲 asettaa printerdrake:n kautta.\n"
+"Voit k盲ynnist盲盲 printerdrake:n Mandraken Ohjauspaneelista Laitteisto-osasta."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Tee ensin varmuuskopio tiedoistasi"
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Read carefully!"
-msgstr "Lue tarkkaan!"
+msgid "Japan (cable)"
+msgstr "Japani (kaapeli)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Salausavain (uudelleen)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Tervetuloa Tulostimen asetusvelhoon\n"
+"\n"
+"T盲m盲 velho auttaa sinua asentamaan paikallisesti liitetyn, suoraan verkkoon "
+"liitetyn tai Windows et盲koneeseen liitetyn tulostimen (tulostimia).\n"
+"\n"
+"Jos sinulla on paikallisesti liitetty tulostin (tulostimia), varmista ett盲 "
+"se/ne on kytketty p盲盲lle jotta se/ne voidaan tunnistaa automaattisesti. My枚s "
+"verkkotulostin (tulostimet) ja Windows kone(et) pit盲盲 olla p盲盲ll盲.\n"
+"\n"
+"Huomaa ett盲 tulostimen tunnistaminen verkosta kest盲盲 kauemmin kuin "
+"paikallisten tulostimien tunnistus. Eli poista verkkotulostimien ja/tai "
+"Windows-tulostimien tunnistus, jos et tarvitse niit盲.\n"
+"\n"
+"Paina \"Seuraava\" kun haluat jatkaa tai \"Peruuta\" jos et halua asettaa "
+"tulostinta (tulostimia) nyt."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Encryption key"
-msgstr "Salausavain"
+msgid "Initial tests"
+msgstr "Alkutestit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Salausavaimet eiv盲t t盲sm盲盲"
+msgid "Continue"
+msgstr "Jatka"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Salausavain on liian yksinkertainen (sen pit盲盲 olla ainakin %d merkki盲 pitk盲)"
+msgid "Custom Restore"
+msgstr "Mukautettu palautus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Valitse tiedostoj盲rjestelm盲si salausavain"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+"\"%s\": jos 盲盲nikortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
+"n盲ytet盲盲n t盲盲ll盲. Jos huomaat ett盲 n盲ytetty 盲盲nikortti ei vastaa sit盲\n"
+"joka on asennettu koneeseesi, voit painaa t盲t盲 painiketta ja valita toisen\n"
+"ajurin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Tiedostoj盲rjestelm盲n salausavain"
+msgid "Script-based"
+msgstr "Script-pohjainen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Type: "
-msgstr "Tyyppi: "
+msgid "Error reading file %s"
+msgstr "Virhe lukiessa tiedostoa %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "v盲yl盲ss盲 %d id %d\n"
+msgid "PLL setting:"
+msgstr "PLL asetus:"
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Osion tyyppi: %s\n"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Sinulla pit盲盲 olla FAT-osio liitettyn盲 hakemistoon /boot/efi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-levyt %s\n"
+msgid " on "
+msgstr ":ssa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Info: "
-msgstr "Tietoja: "
+msgid "The URL must begin with http:// or https://"
+msgstr "Web-osoitteen tulee alkaa etuliitteell盲 'http://' tai 'https://'"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s sylinteri盲, %s lukup盲盲t盲, %s sektoria\n"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Voit m盲盲ritt盲盲 URI:n suoraan k盲ytt盲盲ksesi tulostinta. URI:n pit盲盲 t盲ytt盲盲 "
+"joko CUPS tai Foomaatic m盲盲ritykset. Huomioi ettei kaikki URI tyypit ole "
+"tuettuja kaikissa tulostusjonoissa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Koko: %s\n"
+msgid "Other OS (SunOS...)"
+msgstr "Muu k盲ytt枚j盲rjestelm盲 (SunOS...)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Read-only"
-msgstr "Vain luku"
+msgid "Install/Upgrade"
+msgstr "Asenna/P盲ivit盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Device: "
-msgstr "Laite: "
+msgid "%d packages"
+msgstr "%d pakettia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
msgstr ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Varmistus- ja palautussovellus\n"
"\n"
-"T盲m盲 erityinen Bootsrap-\n"
-"osio on j盲rjestelm盲si\n"
-"kaksoisk盲ynnist盲miseksi.\n"
+"--default : tallenna oletushakemistot.\n"
+"--debug : n盲yt盲 kaikki debuggaus-viestit.\n"
+"--show-conf : varmistettavien tiedostojen tai hakemistojen "
+"listaus.\n"
+"--config-info : selit盲 asetustiedoston optiot (k盲ytt盲jille ilman "
+"X).\n"
+"--daemon : k盲yt盲 demoni-asetukset. \n"
+"--help : n盲yt盲 t盲m盲 viesti.\n"
+"--version : n盲yt盲 versiotiedot.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Verkkoaluetunnistus vaaditaan"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
"\n"
-"On mahdollista, ett盲 t盲m盲 osio on\n"
-"ajuriosio. Sinun olisi kaiketi\n"
-"parasta j盲tt盲盲 se rauhaan.\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-tiedoston nimi: %s"
+"\n"
+" Kiitokset:\n"
+"\t- LTSP Projekti http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-levyt %s\n"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Palan koko %s\n"
+msgid "Use libsafe for servers"
+msgstr "K盲yt盲 libsafea palvelimille"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Taso %s\n"
+msgid "Icelandic"
+msgstr "Islanti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
msgstr ""
-"Osiolta k盲ynnistet盲盲n oletuksena\n"
-" (MS-DOS k盲ynnistys, ei lilo)\n"
+"\n"
+"K盲ytt枚: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback tiedosto(t):\n"
-" %s\n"
+msgid "Please relog into %s to activate the changes"
+msgstr "Kirjaudu uudelleen %s:een aktivoidaksesi muutokset"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Mounted\n"
-msgstr "Liitetty\n"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub-tila"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Ei alustettu\n"
+msgid "Output"
+msgstr "Tuloste"
-#: ../../diskdrake/interactive.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Alustettu\n"
+msgid "Circular mounts %s\n"
+msgstr "Ympyr盲-liitoksia %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sylinterist盲 %d sylinteriin %d\n"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoria"
+msgid "HardDrive / NFS"
+msgstr "Kiintolevy / NFS"
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "Koko: %s"
+msgid "a number"
+msgstr "numero"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "Alkaa: sektori %s\n"
+msgid "Swedish"
+msgstr "Ruotsi"
-#: ../../diskdrake/interactive.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nimi: "
+msgid "Which %s driver should I try?"
+msgstr "Mit盲 %s-ajuria kokeillaan?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-asema: %s (vain arvaus)\n"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "Saat h盲lytyksen kun jokin valituista palveluista ei ole en盲盲 k盲ynniss盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "osio %s tunnetaan nyt nimell盲 %s"
+msgid "Filesystem types:"
+msgstr "Tiedostoj盲rjestelmien tyypit:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Poistetaan %s"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", monitoimilaite HP JetDirectiss盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Kopioidaan %s"
+msgid "Northern Mariana Islands"
+msgstr "Pohjoiset Mariaanit"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "Siirr盲n tiedostoja uudelle osiolle"
+msgid "none"
+msgstr "ei mik盲盲n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "user :"
+msgstr "k盲ytt盲j盲 :"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your password"
+msgstr "Sy枚t盲 salasanasi"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Hakemisto %s sis盲lt盲盲 jo jotakin tietoa\n"
-"(%s)"
+"Luotavan profiilin nimi (uusi profiili luodaan kopioimalla nykyisen tiedot) :"
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Piilota tiedostot"
+msgid "Floppy"
+msgstr "Levyke"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "Siirr盲 tiedostot uuteen osioon"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Valitse t盲m盲 jos haluat tyhjent盲盲 RW-median (ensimm盲inen sessio)"
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kaikki osiolla %s olevat tiedot h盲vi盲v盲t osion alustuksen yhteydess盲"
+msgid "Ghostscript referencing"
+msgstr "Ghostscript viittaus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Sinun t盲ytyy k盲ynnist盲盲 kone uudelleen ennen kuin muutos tulee voimaan"
+msgid "Bootloader"
+msgstr "K盲ynnistyslataaja"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Levyn %s osiotaulu kirjotetaan levylle!"
+msgid "Move"
+msgstr "Siirr盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Paketti %s tarvitaan. Haluatko asentaa sen?"
+msgid "Bootloader to use"
+msgstr "K盲ytett盲v盲 j盲rjestelm盲lataaja"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Mink盲 tyyppinen osiointi?"
+msgid "SMB server host"
+msgstr "SMB-palvelimen nimi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Varo: t盲m盲 on vaarallinen toiminto"
+msgid "Name Servers:"
+msgstr "Nimipalvelimet:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "chunk size"
-msgstr "palan koko"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Varoitus\n"
+"\n"
+"Lue huolellisesti alla olevat ehdot. Jos et hyv盲ksy kaikkia\n"
+"ehtoja, sinulla ei ole oikeuksia asentaa seuraavaa CD-levy盲.\n"
+"Paina 'Kielt盲ydyn' jos haluat jatkaa asennusta k盲ytt盲m盲tt盲 n盲it盲 osia.\n"
+"\n"
+"\n"
+"Jotkin seuraavalla CD-levyll盲 olevat komponentit eiv盲t ole GPL:n tai\n"
+"vastaavanlaisen lisenssin alaisia. Jokaisen t盲llaisen komponentin ehdot\n"
+"on m盲盲ritelty erikseen niiden omien lisenssien mukaan. Tutustu n盲ihin\n"
+"lisensseihin huolellisesti ennen kuin k盲yt盲t tai levit盲t n盲it盲 "
+"komponentteja\n"
+"eteenp盲in.\n"
+"T盲llaiset lisenssit kielt盲v盲t tavallisesti siirt盲misen, kopioimisen\n"
+"(lukuunottamatta varmuuskopioita), uudelleenlevityksen, "
+"k盲盲nteissuunnittelun \n"
+"bin盲盲rikoodin k盲盲nt盲misen tai muokkaamisen. Jokainen rike sopimusta \n"
+"vastaan p盲盲tt盲盲 oikeutesi kyseiseen lisenssiin. Ellei ole olemassa "
+"erityisi盲 \n"
+"ehtoja, jotka sallivat ohjelmiston asentamisen useaan koneeseen tai \n"
+"niiden k盲ytt盲mist盲 verkon yli, et saa my枚sk盲盲n tehd盲 niin. Jos et ole \n"
+"varma kaikista ehdoista, ota yhteys suoraan kyseisen komponentin \n"
+"tekij盲盲n tai jakelijaan. Yll盲 mainittujen komponenttien tai niiden \n"
+"dokumentaation saattaminen kolmannen osapuolen k盲siin on tavallisesti \n"
+"kielletty.\n"
+"\n"
+"\n"
+"Kaikki oikeudet seuraavan levyn komponentteihin kuuluvat niiden \n"
+"asianomaisille tekij枚ille ja ne on suojattu yksityisen omaisuuden ja \n"
+"ohjelmistojen tekij盲noikeuslakien mukaan.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "level"
-msgstr "taso"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Poista t盲m盲 tulostin Star Office/OpenOffice.org/GIMP k盲yt枚st盲."
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../services.pm:1
#, c-format
-msgid "device"
-msgstr "laite"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
+msgstr ""
+"Linux Virtual Server, jonka avulla voidaan rakentaa suuritehoinen\n"
+"korkean k盲ytett盲vyyden palvelin."
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Various"
-msgstr "Useita"
+msgid "4 billion colors (32 bits)"
+msgstr "4 miljardia v盲ri盲 (32 bitti盲)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Liitt盲misen optiot"
+msgid "Micronesia"
+msgstr "Mikronesia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Tiedosto on jo olemassa. K盲yt盲 sit盲?"
+msgid "License"
+msgstr "Lisenssi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Tiedosto on jo toisen loopback:in k盲yt枚ss盲, valitse toinen"
+msgid "This may take a moment to generate the keys."
+msgstr "Avaimien luominen voi kest盲盲 v盲h盲n aikaa."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Anna tiedostonimi"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
+"Tulostimen automaattitunnistus (paikallinen, TCP/Socket ja SMB-tulostimet )"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tiedostoj盲rjestelm盲: "
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (k盲ytt盲en pppoa) usb"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Koko Mt: "
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"On tapahtunut virhe - ei l枚ytynyt ainuttakaan laitetta, joille voi luoda "
+"uuden tiedostoj盲rjestelm盲n. Tarkista laitteistosi korjataksesi ongelman"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback tiedostonimi: "
+msgid "Starting the printing system at boot time"
+msgstr "K盲ynnist盲盲 tulostusj盲rjestelm盲n k盲ynnistyksen aikana"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Do you want to start the connection at boot?"
+msgstr "Haluatko ottaa yhteyden koneen k盲ynnistyksen yhteydess盲?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Osiota ei voida k盲ytt盲盲 loopback-osiona"
+msgid "Processor ID"
+msgstr "Prosessorin ID"
-#: ../../diskdrake/interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "LVM:n nimi?"
+msgid "Sound trouble shooting"
+msgstr "脛盲nen vianetsint盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "new"
-msgstr "uusi"
+msgid "Polish (qwerty layout)"
+msgstr "Puola (QWERTY j盲rjestys)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Valitse olemassaoleva LVM johon lis盲t盲盲n"
+msgid "activate now"
+msgstr "aktivoi nyt"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Valitse olemassaoleva RAID johon lis盲t盲盲n"
+msgid ""
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
+msgstr ""
+"\n"
+"Drakbackup toimintoja CD:n kautta:\n"
+"\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Siirr盲n osiota..."
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Olet asentamassa tulostusj盲rjestelm盲盲 %s j盲rjestelm盲盲n, joka k盲ytt盲盲 "
+"turvallisuustasoa %s.\n"
+"\n"
+"T盲m盲 tulostusj盲rjestelm盲 suorittaa demonin (taustaprosessina), joka odottaa "
+"tulostust枚it盲 ja k盲sittelee niit盲. T盲m盲 demoni on my枚s k盲ytett盲viss盲 "
+"et盲koneilta verkon kautta, ja sen vuoksi se on mahdollinen hy枚kk盲yskohde. "
+"T盲st盲 syyst盲 ainoastaan harvat valitut demonit k盲ynnistet盲盲n oletuksena "
+"t盲ll盲 turvallisuustasolla.\n"
+"\n"
+"Haluatko varmasti asettaa tulostusta t盲ss盲 koneessa?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moving"
-msgstr "Siirr盲n"
+msgid "Host \"%s\", port %s"
+msgstr "Kone \"%s\", portti %s"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Mille sektorille haluat siirt盲盲?"
+msgid "This partition can't be used for loopback"
+msgstr "Osiota ei voida k盲ytt盲盲 loopback-osiona"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sector"
-msgstr "Sektori"
+msgid "File already exists. Use it?"
+msgstr "Tiedosto on jo olemassa. K盲yt盲 sit盲?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Mille levylle haluat siirt盲盲?"
+msgid "received: "
+msgstr "vastaanotettu: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move"
-msgstr "Siirr盲"
+msgid "Right Alt key"
+msgstr "Oikea Alt n盲pp盲in"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "New size in MB: "
-msgstr "Uusi koko (Mt): "
+msgid "the list of alternative drivers for this sound card"
+msgstr "listaus vaihtoehtoisista ajureista t盲lle 盲盲nikortille"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose the new size"
-msgstr "Valitse uusi koko"
+msgid "Gateway"
+msgstr "Yhdysk盲yt盲v盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Resize"
-msgstr "Uusi koko"
+msgid "Scanner sharing"
+msgstr "Kuvanlukijan jako"
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Osion %s koon muuttamisen j盲lkeen kaikki osion tiedot tuhoutuvat"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Kaikki osion tiedot tulisi varmuuskopioida"
+msgid "Tunisia"
+msgstr "Tunisia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "T盲m盲n osion kokoa ei voi muuttaa"
+msgid "Profile: "
+msgstr "Profiili: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Lasken FAT-tiedostoj盲rjestelm盲n rajoja"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Valitse laite vasemmalla olevasta puusta n盲hd盲ksesi sen tiedot t盲盲ll盲."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Minne haluat liitt盲盲 laitteen %s?"
+msgid "XawTV isn't installed!"
+msgstr "XawTV ei ole asennettuna!"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-"Ei voida poistaa liitospistett盲 koska osiota k盲ytet盲盲n loopback-tilassa.\n"
-"Poista loopback-tiedosto ensin"
+"Luo/Siirr盲\n"
+"SSH:n varmistusavaimet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Minne haluat liitt盲盲 laitteen %s?"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "脛l盲 sis盲llyt盲 kriittisi盲 tiedostoja (passwd, group, fstab)"
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Minne haluat liitt盲盲 loopback-tiedoston %s?"
+msgid "old static device name used in dev package"
+msgstr "vanha staattinen laitenimi jota on k盲ytetty dev-paketissa"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Vaihdan ext2:sta ext3:een"
+msgid "This label is already used"
+msgstr "Nimike on jo k盲yt枚ss盲"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Mink盲 tiedostoj盲rjestelm盲n haluat?"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Tervetuloa Tulostimen asetusvelhoon\n"
+"\n"
+"T盲m盲 velho auttaa sinua asentamaan paikallisesti liitetyn tai suoraan "
+"verkkoon liitetyn tulostimen (tulostimia).\n"
+"\n"
+"Jos sinulla on paikallisesti liitetty tulostin (tulostimia), varmista ett盲 "
+"se/ne on kytketty p盲盲lle jotta se/ne voidaan tunnistaa automaattisesti. My枚s "
+"verkkotulostin (tulostimet) pit盲盲 olla p盲盲ll盲.\n"
+"\n"
+"Huomaa ett盲 tulostimen tunnistaminen verkosta kest盲盲 kauemmin kuin "
+"paikallisten tulostimien tunnistus. Eli poista verkkotulostimien tunnistus "
+"jos et tarvitse sit盲.\n"
+"\n"
+"Paina \"Seuraava\" kun haluat jatkaa tai \"Peruuta\" jos et halua asettaa "
+"tulostinta (tulostimia) nyt."
+# mat
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Muuta osiotyyppi盲"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Kaikki osiolla %s olevat tiedot h盲vi盲v盲t osion alustuksen yhteydess盲"
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Vaihdettuasi osion %s tyyppi盲 kaikki siin盲 olevat tiedot h盲vi盲v盲t"
+msgid "Connection Time: "
+msgstr "Yhteysaika: "
-# mat
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Poista loopback-tiedosto?"
+msgid "select perm file to see/edit"
+msgstr "valitse n盲ytett盲v盲/muokattava perm tiedosto"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Et voi luoda uutta osiota.\n"
-"(koska sinulla on jo maksimim盲盲r盲 prim盲盲riosioita k盲yt枚ss盲).\n"
-"Poista ensin yksi prim盲盲riosio, ja luo laajennettu osio sen tilalle."
+"Aseta asennuslevy CD-asemaan ja paina OK.\n"
+"Jos sinulla ei ole levy盲, paina Peruuta est盲盲ksesi j盲rjestelm盲n p盲ivityksen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Preference: "
-msgstr "Ominaisuus: "
+msgid "Use group id for execution"
+msgstr "k盲yt盲 ryhm盲 id suoritukseen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Aloitussektori: "
+msgid "Choose the default user:"
+msgstr "Valitse oletusk盲ytt盲j盲:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Luo uusi osio"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "K盲yt盲 loopback-tiedostoa"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"Tulostimia, jotka ovat CUPS-et盲palvelimella, ei tarvitse asettaa\n"
+"t盲ss盲; n盲m盲 tulostimet tunnistetaan automaattisesti."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Muokkaa RAIDia"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr ""
+"Mandrake Linux tukee useaa kielt盲. Valitse kielet jotka\n"
+"haluat asentaa. Ne ovat k盲ytett盲viss盲 asennuksen j盲lkeen\n"
+"kun olet k盲ynnist盲nyt koneesi uudelleen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Poista LVM:st盲"
+msgid "Domain"
+msgstr "Verkkoalue"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Poista RAIDista"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Tarkka muistin koko, jos tarpeen (l枚ydettiin %d Mt)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Lis盲盲 LVM:iin"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO (the LInux LOader) ja GRUB ovat GNU/Linux j盲rjestelm盲lataajia.\n"
+"Yleens盲 t盲m盲 askel on automaattinen, eli DrakX analysoi k盲ynnistys-\n"
+"sektorin ja toimii sen mukaan mit盲 sielt盲 l枚ytyy:\n"
+"\n"
+" * jos Windows k盲ynnistyssektori l枚ytyy, sen tilalle asennetaan GRUB/LILO\n"
+"k盲ynnistyssektori. T盲ll盲 tavalla voit k盲ynnist盲盲 GNU/Linuxin tai jonkin\n"
+"muun k盲ytt枚j盲rjestelm盲n.\n"
+"\n"
+" * jos GRUB tai LILO k盲ynnistyssektori l枚ytyy, se p盲ivitet盲盲n uudempaan\n"
+"versioon.\n"
+"\n"
+"Jos DrakX ei voi tehd盲 p盲盲t枚st盲, se kysyy sinulta mihin haluat asentaa\n"
+"k盲ynnistyslataajan."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Add to RAID"
-msgstr "Lis盲盲 RAIDiin"
+msgid "Provider dns 2 (optional)"
+msgstr "Yhteydentarjoajan聽dns聽2聽(vapaaehtoinen)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Format"
-msgstr "Alusta"
+msgid "Boot device"
+msgstr "K盲ynnistyslaite"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Yksityiskohtaiset tiedot"
+msgid "Which partition do you want to resize?"
+msgstr "Mink盲 osion kokoa haluat muuttaa?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Yrit盲n osiotaulun pelastusta"
+msgid "United States Minor Outlying Islands"
+msgstr "Yhdysvaltain Tyynenmeren erillissaaret"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Aseta levyke asemaan\n"
-"Kaikki levykkeen tiedot h盲vi盲v盲t"
+msgid "A tool to monitor your logs"
+msgstr "Ty枚kalu lokien seuraamiseen"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Warning"
-msgstr "Varoitus"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Select file"
-msgstr "Valitse tiedosto"
+msgid "detected on port %s"
+msgstr "l枚ydetty portista %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Osiotaulun varmuuskopio ei ole saman kokoinen\n"
-"Jatka silti?"
+msgid "LPD"
+msgstr "LPD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Vaihdettavan median automaattinen liitt盲minen"
+msgid "Graphics card: %s\n"
+msgstr "N盲yt枚nohjain: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Uudelleenlataa osiotaulu"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Pelasta osiotaulu"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Valitse t盲m盲 jos k盲yt盲t DVDRAM laitetta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Restore partition table"
-msgstr "Palauta osiotaulu"
+msgid "Splash selection"
+msgstr "Splash valinta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save partition table"
-msgstr "Tallenna osiotaulu"
+msgid "Extended partition not supported on this platform"
+msgstr "Laajennettua osiotyyppi盲 ei ole tuettu t盲ss盲 ymp盲rist枚ss盲"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Voidaksesi luoda lis盲盲 osioita tuhoa yksi olemassaoleva osio jotta voisit "
-"luoda laajennetun osion"
+msgid "ISDN Configuration"
+msgstr "ISDN asetus"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Uusia osioita ei voida lis盲t盲"
+msgid "high"
+msgstr "korkea"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Kaikki prim盲盲riosiot k盲ytetty"
+msgid "Internet Connection Sharing"
+msgstr "Internetyhteyden jakaminen"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Hard drive information"
-msgstr "Kiintolevyn tiedot"
+msgid "Choose file"
+msgstr "Valitse tiedosto"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Automaattinen varaus"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Varoitus! Olemassaoleva palomuuri l枚ydetty. Tarvitset mahdollisesti k盲sin "
+"teht盲vi盲 korjauksia asennuksen j盲lkeen."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Tyhjenn盲 kaikki"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Tulostus/Kuva-Kortin k盲ytt枚 laitteella \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Haluatko tallentaa muutokset tiedostoon /etc/fstab"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Haluatko mahdollistaa tulostamisen yll盲 mainittuihin tulostimiin tai "
+"tulostimiin, jotka l枚ytyv盲t paikallisverkostasi?\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Lopeta kirjoittamatta osiotaulua?"
+msgid "Printer default settings"
+msgstr "Tulostimen oletusasetuksia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "Lopeta tallentamatta"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Yleinen PS2 rullahiiri"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Jatka joka tapauksessa?"
+msgid "Removing old printer \"%s\"..."
+msgstr "Poistetaan vanha tulostin \"%s\" ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Vaihda Asiantuntija-tilaan"
+msgid "Select a device !"
+msgstr "Valitse laite !"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Vaihda Vakio-tilaan"
+msgid "Remove selected server"
+msgstr "Poista valittu palvelin"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Undo"
-msgstr "Peruuta"
+msgid "French Southern Territories"
+msgstr "Ranskan etel盲iset alueet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Exit"
-msgstr "Poistu"
+msgid "the vendor name of the processor"
+msgstr "prosessorin valmistaja"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Valitse osio"
+msgid "All data on this partition should be backed-up"
+msgstr "Kaikki osion tiedot tulisi varmuuskopioida"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose another partition"
-msgstr "Valitse toinen osio"
+msgid "Installing package %s"
+msgstr "Asennan pakettia: %s"
-#: ../../diskdrake/removable.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change type"
-msgstr "Muuta tyyppi盲"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Tarkistan laite ja asetan HPOJ..."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Search servers"
-msgstr "Hae palvelimet"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Voidaksesi luoda lis盲盲 osioita tuhoa yksi olemassaoleva osio jotta voisit "
+"luoda laajennetun osion"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Domain"
-msgstr "Verkkoalue"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Tulostimesi asetettiin automaattisesti sallimaan kuva-kortti-aseman k盲ytt枚 "
+"tietokoneeltasi. Voit nyt k盲ytt盲盲 kuvakorttisi graafisella ohjelmalla "
+"\"MtoolsFM\" (Valikko: \"Sovellukset\" -> \"Tiedostoty枚kalut\" -> \"Mtools "
+"tiedostonhallinta\") tai komentorivity枚kaluilla \"mtools\" ( \"man mtools\" "
+"komentorivill盲 antaa lis盲盲 tietoa). L枚yd盲t kortin tiedostoj盲rjestelm盲n "
+"asematunnuksen \"p:\" alta tai sen j盲lkeisten asematunnusten alta mik盲li "
+"sinulla on enemm盲n kuin yksi HP tulostin, jossa on kuva-kortti asema. Jos "
+"k盲yt盲t \"MtoolsFM\":a voit vaihtaa eri asematunnusten v盲lill盲 "
+"tiedostolistauksen oikean yl盲kulman kent盲ss盲."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "K盲ytt盲j盲tunnus"
+msgid "Choose packages to install"
+msgstr "Asennettavien pakettien valinta"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Anna tunnuksesi, salasanasi ja verkkoalue k盲ytt盲盲ksesi t盲t盲 palvelinta."
+"\n"
+" Jotkut virheet sendmailin aikana johtuvat huonoista \n"
+"postfix-asetuksista. Korjataksesi vian sinun t盲ytyy asettaa \n"
+"myhostname tai mydomain /etc/postfix/main.cf tiedostossa.\n"
+"\n"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+# mat
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Verkkoaluetunnistus vaaditaan"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "KAIKKI olemassaolevat osiot ja niiss盲 oleva tieto tuhoutuu asemalta %s"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Another one"
-msgstr "Toinen"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"J盲rjestelm盲ss盲si ei ole riitt盲v盲sti tilaa asennukseen tai p盲ivitykseen (%d > "
+"%d)"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which username"
-msgstr "Mik盲 k盲ytt盲j盲tunnus"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Jokainen tulostin tarvitsee nimen (esim. \"tulostin\"). Kentti盲 Kuvaus ja "
+"Sijainti ei tarvitse t盲ytt盲盲. Ne ovat kommentteja k盲ytt盲jille."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "En voi kirjoittautua k盲ytt盲j盲tunnuksella: %s (v盲盲r盲 salasana?)"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"%s\": painamalla \"%s\" painiketta avautuu tulostimen\n"
+"asetusvelho. Katso t盲t盲 vastaava lukua ``Aloitusoppaasta'' saadaksesi\n"
+"lis盲tietoa miten asetat uuden tulostimen. Oppaassa n盲ytetty\n"
+"k盲ytt枚liittym盲 on vastaava kuin asennuksen aikana k盲ytetty."
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Bhutan"
+msgstr "Bhutan"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-ohjaimet"
+msgid "Network interface"
+msgstr "Verkkoliit盲nt盲"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USB controllers"
-msgstr "USB-ohjaimet"
+msgid "Reading printer data..."
+msgstr "Luetaan tulostimen tietoja ..."
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-ohjaimet"
+msgid "Korean keyboard"
+msgstr "Korealainen n盲pp盲imist枚"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Firewire controllers"
-msgstr "FireWire ohjaimet"
+msgid "Not connected"
+msgstr "Ei yhteytt盲"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-ohjaimet"
+msgid "Greek"
+msgstr "Kreikka"
-#: ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Joystick"
-msgstr "Peliohjain"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Jos \\fIarg\\fP = ALL salli /etc/issue ja /etc/issue.net olemassaolo. Jos "
+"\\fIarg\\fP = NONE kumpaakaan\n"
+"ei sallita muutoin sallitaan ainoastaan/etc/issue."
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanner"
-msgstr "Kuvanlukija"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint Kitts ja Nevis"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Tuntematon/Muut"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Siirto onnistui\n"
+"Sinun kannattaa varmistaa ett盲 voit kirjoittautua palvelimeen komennolla:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"ilman ett盲 sinulta pyydet盲盲n salasanaa."
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Sillat ja j盲rjestelm盲ohjaimet"
+msgid "Enable OF Boot?"
+msgstr "Mahdollista OF-k盲ynnistys?"
-#: ../../harddrake/data.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modeemi"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Et voi k盲ytt盲盲 JFS:盲 alle 16 Mt osioilla"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Verkkokortti"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "N盲yt枚n virkistystaajuus: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Processors"
-msgstr "Prosessorit"
+msgid "path"
+msgstr "polku"
-#: ../../harddrake/data.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webbikamera"
+msgid "Mount point"
+msgstr "Liitospiste"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "脛盲nikortti"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"Tapahtui virhe:\n"
+"%s\n"
+"Kokeile muuttaa joitakin asetuksia"
-#: ../../harddrake/data.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Muu multimedialaite"
+msgid "Restore system"
+msgstr "Palauta j盲rjestelm盲"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Tvcard"
-msgstr "TV-kortti"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
+"N盲m盲 ovat koneet ja verkot jossa paikallisesti liitetty kuvanlukija(t) "
+"pit盲isi olla k盲ytett盲viss盲:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Videocard"
-msgstr "N盲yt枚nohjain"
+msgid "The DHCP end ip"
+msgstr "DHCP:n alueen loppu"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Tape"
-msgstr "Nauha"
+msgid "Another one"
+msgstr "Toinen"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD polttoasemat"
+msgid "Colombia"
+msgstr "Kolumbia"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
+"Koneen `%s' nykyiset asetukset:\n"
+"\n"
+"Verkko: %s\n"
+"IP-osoite: %s\n"
+"IP-m盲盲reet: %s\n"
+"Ajuri: %s"
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Disk"
-msgstr "Levy"
+msgid "Plug'n Play"
+msgstr "Kytke ja K盲yt盲"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Zip"
-msgstr "Zip"
+msgid "Reunion"
+msgstr "Reunion"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Levyke"
+msgid "Details"
+msgstr "Yksityiskohdat"
-#: ../../harddrake/sound.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Anna minun valita mik盲 ajuri tahansa"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Turvallisuussyist盲 yhteys suljetaan nyt."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Driver:"
-msgstr "Ajuri:"
+msgid "Synchronization tool"
+msgstr "Synkronointity枚kalu"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Jos todellakin uskot tiet盲v盲si mik盲 ajuri on oikea 盲盲nikortillesi \n"
-"voit valita yhden yll盲 olevasta listasta.\n"
-"\n"
-"Nykyinen ajuri 盲盲nikortillesi \"%s\" on \"%s\" "
+msgid "Checking your system..."
+msgstr "Tarkistan j盲rjestelm盲盲si..."
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Summittaisen ajurin valinta"
+msgid "Print"
+msgstr "Tulosta"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
msgstr ""
-"Klassinen tapa etsi盲 virheit盲 盲盲niasetuksissa on suorittaa \n"
-"seuraavat komennot:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" kertoo mit盲 ajuria 盲盲nikorttisi \n"
-"k盲ytt盲盲 oletuksena.\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" kertoo mit盲 ajuria 盲盲nikorttisi\n"
-"k盲ytt盲盲 t盲ll盲 hetkell盲.\n"
-"\n"
-"- \"/sbin/lsmod\" komennolla tarkistat onko 盲盲nikortin moduuli (ajuri)\n"
-"ladattu vai ei .\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" ja \"/sbin/chkconfig --list alsa\"\n"
-"kertoo sinulle jos 盲盲ni- ja alsa-palvelut ovat asetettu toimimaan\n"
-"initlevel 3 -tasossa.\n"
-"\n"
-"- \"aumix -q\" kertoo onko 盲盲ni mykistetty vai ei.\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" kertoo mik盲 ohjelma k盲ytt盲盲 盲盲nikorttia.\n"
+"Aseta nauha nimell盲 %s\n"
+" nauha-asemaan %s"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr "脛盲nen vianetsint盲"
+msgid "Mongolia"
+msgstr "Mongolia"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Virhe: Ajuri \"%s\" 盲盲nikortillesi ei ole listattu"
+msgid "Mounted\n"
+msgstr "Liitetty\n"
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Unkown driver"
-msgstr "Tuntematon ajuri"
+msgid "Graphical Interface"
+msgstr "Graafinen k盲ytt枚liittym盲"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Ei tunnettua ajuria 盲盲nikortillesi (%s)"
+msgid "Restore Users"
+msgstr "Palauta k盲ytt盲j盲t"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Ei tunnettua ajuria"
+msgid "Encryption key for %s"
+msgstr "Salausavain %s:lle"
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-"脛盲nikortillesi (%s) ei l枚ydy vapaata ajuria, mutta patenttisuojattu ajuri "
-"l枚ytyy osoitteesta \"%s\"."
+"Portmapper hallitsee RPC-yhteyksi盲, joita k盲ytt盲v盲t esimerkiksi\n"
+"NFS ja NIS-protokollat. Portmap-palvelin on oltava k盲ynniss盲\n"
+"j盲rjestelmiss盲 jotka haluavat tarjota n盲it盲 protokollia."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No open source driver"
-msgstr "Ei avoimen l盲hdekoodin ajuria"
+msgid "Detected hardware"
+msgstr "Tunnistettu laitteisto"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Odota hetki... Otetaan asetukset k盲ytt枚枚n"
+msgid "Mauritius"
+msgstr "Mauritius"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-"Vanha \"%s\" ajuri on 'mustalla listalla'.\n"
-"\n"
-"Sen on raportoitu kaatavan ytimen kun sit盲 poistetaan k盲yt枚st盲.\n"
-"\n"
-"Uusi \"%s\" ajuri otetaan k盲ytt枚枚n seuraavassa k盲ynnistyksess盲."
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar"
-#: ../../harddrake/sound.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "Vianetsint盲"
+msgid "Enabling swap partition %s"
+msgstr "Otetaan k盲ytt枚枚n sivutusosiota %s"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-"OSS (Open Sound System, eli avoin 盲盲nij盲rjestelm盲) oli ensimm盲inen 盲盲ni-"
-"API.\n"
-"Se on k盲ytt枚j盲rjestelm盲riippumaton 盲盲ni-API (se on saatavilla useimmille\n"
-"unix-j盲rjestelmille), mutta se aika perustasoa ja rajoitettu API.\n"
-"Sen lis盲ksi, OSS-ajureissa kaikki 'kehitt盲v盲t py枚r盲n uudelleen'.\n"
-"\n"
-"ALSA (Advanced Linux Sound system, eli Linuxin edistynyt 盲盲nij盲rjestelm盲) "
-"on\n"
-"modulaarinen arkkitehtuuri, joka tukee suurta m盲盲r盲盲 ISA, USB ja PCI "
-"kortteja.\n"
-"\n"
-"Se tarjoaa my枚s paljon korkeamman tason API:n kuin OSS.\n"
-"\n"
-"K盲ytt盲盲ksesi ALSAa, voit k盲ytt盲盲 yht盲 n盲ist盲:\n"
-"- vanha OSS-yhteensopiva api.\n"
-"- uusi ALSA-api, joka tarjoaa useita parannettuja ominaisuuksia,\n"
-"mutta vaatii ALSA-kirjaston k盲ytt枚盲.\n"
+"Ei ole FAT-osioita, jota voisi k盲ytt盲盲 loopback-tiedostona (tai ei "
+"riitt盲v盲sti vapaata tilaa)"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "Armeenia (vanha)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"\n"
-"\n"
-"K盲yt盲t t盲ll盲 hetkell盲 ajuria %s\"%s\" (vakioajuri kortillesi on \"%s\")."
+"Tulostin nimell盲 \"%s\" on jo olemassa kohdassa %s.\n"
+"Paina \"Siirr盲\" ylikirjoittaaksesi sen.\n"
+"Voit my枚s kirjoittaa uuden nimen tai ohittaa t盲m盲n tulostimen."
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"T盲盲ll盲 voit valita vaihtoehtoisen ajurin (OSS tai ALSA) 盲盲nikortillesi (%s)."
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "L枚yd盲 ratkaisuja ongelmiisi MandrakeSoft:n online-tukialustasta"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "脛盲niasetukset"
+msgid ", host \"%s\", port %s"
+msgstr ", kone \"%s\", portti %s"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Tunnettua vaihtoehtoista OSS/ALSA ajuria 盲盲nikortillesi (%s), joka t盲ll盲 "
-"hetkell盲 k盲ytt盲盲 \"%s\", ei ole"
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../harddrake/sound.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Ei vaihtoehtoista ajuria"
+msgid "%s formatting of %s failed"
+msgstr "%s:n alustus %s:ta ep盲onnistui"
-#: ../../harddrake/v4l.pm:1
+# mat
+#: ../../install_interactive.pm:1
#, c-format
-msgid "enable radio support"
-msgstr "ota radio-tuki k盲ytt枚枚n"
+msgid "Partitioning failed: %s"
+msgstr "Osiointi ep盲onnistui: %s"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Radio support:"
-msgstr "Radiotuki:"
+msgid "Canada (cable)"
+msgstr "Kanada (kaapeli)"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "PLL setting:"
-msgstr "PLL asetus:"
+msgid "Upgrade"
+msgstr "P盲ivit盲"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "mmap-kaappauspuskurien m盲盲r盲:"
+msgid "Workstation"
+msgstr "Ty枚asema"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Kaappauspuskurien m盲盲r盲:"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Asennan pakettia: %s\n"
+"%d%%"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Tuner type:"
-msgstr "Vastaanottimen tyyppi:"
+msgid "Kyrgyzstan"
+msgstr "Kyrgyzstan"
-#: ../../harddrake/v4l.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Kortin malli:"
+msgid "With basic documentation"
+msgstr "Perusdokumentaation kanssa"
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron on ajoitettujen komentojen ajastaja."
+
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
-"Useimmille nykyisille TV-korteille GNU/Linux ytimen bttv-moduuli tunnistaa "
-"automaattisesti oikeat parametrit.\n"
-"Jos korttisi on tunnistettu v盲盲rin, voit pakottaa oikean vastaanottimen sek盲 "
-"kortin tyypin t盲盲ll盲. Valitse TV-korttisi parametrit tarvittaessa."
+"Sinulla tulee olla juuriosio.\n"
+"T盲t盲 varten luo osio (tai klikkaa olemassaolevaa).\n"
+"Valitse sitten toiminto ``Liitospiste'' ja aseta se arvoon `/'"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Tuntematon|Yleinen"
+msgid "Proxy should be http://..."
+msgstr "V盲lityspalvelimen tulee olla muotoa http://..."
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Tuntematon|CPH06X (bt878) [monta valmistajaa]"
+msgid "South Africa"
+msgstr "Etel盲-Afrikka"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Tuntematon|CPH05X (bt878) [monta valmistajaa]"
+msgid "Western Sahara"
+msgstr "L盲nsi-Sahara"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect"
-msgstr "Automaattinen tunnistaminen"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot levyke/ISO"
-#: ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do"
-msgstr "Tee"
+msgid "Modify printer configuration"
+msgstr "Muokkaa tulostimen asetuksia"
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Valintasi? (oletus %s) "
+msgid "Choose a partition"
+msgstr "Valitse osio"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Huono valinta, yrit盲 uudelleen\n"
+msgid "Edit current rule"
+msgstr "Muokkaa nykyist盲 s盲盲nt枚盲"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Re-submit"
-msgstr "L盲het盲 uudelleen"
+msgid "%s"
+msgstr "%s"
-#: ../../interactive/stdio.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-"=> Huomaa, nimike vaihtui:\n"
-"%s"
+"Parametrit: (arg)\n"
+"\n"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 ep盲tavallisten IPv4 pakettien kirjaaminen "
+"lokiin."
-#: ../../interactive/stdio.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Valitse ensimm盲inen numero 10-alueella, jota haluat muokata,\n"
-"tai paina vain Enter jatkaaksesi.\n"
-"Valintasi? "
+msgid "Please test the mouse"
+msgstr "Testaa hiiri"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> On monta asiaa, joista valita (%s).\n"
+msgid "Other Media"
+msgstr "Muu media"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Valintasi? (oletus '%s'%s) "
+msgid "Backup system files"
+msgstr "Varmuuskopioi j盲rjestelm盲tiedostot"
-#: ../../interactive/stdio.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr " kirjoita 'void' jos haluat tyhj盲n tietueen"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../interactive/stdio.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Haluatko klikata t盲t盲 painiketta?"
+msgid "Sector"
+msgstr "Sektori"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Painike '%s': %s"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Valintasi? (0/1, oletus '%s') "
+msgid "LDAP Base dn"
+msgstr "LDAP perus-dn"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"You can't select this package as there is not enough space left to install it"
msgstr ""
-"Kohdat, jotka sinun pit盲盲 t盲ytt盲盲:\n"
-"%s"
+"Et voi asentaa t盲t盲 pakettia, koska levyll盲 ei ole tarpeeksi tilaa sen "
+"asentamiseksi"
-#: ../../modules/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moduulin %s lataaminen ep盲onnistui.\n"
-"Haluatko yritt盲盲 muilla asetuksilla?"
+msgid "generate auto-install floppy"
+msgstr "Luo automaattinen asennuslevyke"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Specify options"
-msgstr "Lis盲asetukset"
+msgid "Dialing mode"
+msgstr "Soittotila"
-#: ../../modules/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "Automaattitunnistus"
+msgid "File sharing"
+msgstr "Tiedostojen jako"
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Joissakin tapauksissa %s-ajuri tarvitsee lis盲tietoja toimiakseen kunnolla,\n"
-"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
-"lis盲m盲盲reit盲 vai annatko sen itse etsi盲 tarvitsemansa tiedot? Joskus haku\n"
-"voi jumiuttaa tietokoneen, mutta se ei pit盲isi aiheuta vahinkoa."
+msgid "Clean /tmp at each boot"
+msgstr "Tyhjenn盲 /tmp jokaisella k盲ynnistyskerralla"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Mit盲 %s-ajuria kokeillaan?"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Moduulin optiot:"
+msgid "Please choose your type of mouse."
+msgstr "Valitse hiiren tyyppi."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Voit antaa lis盲asetuksia moduulille %s.\n"
-"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
-"Esimerkiksi, ``io=0x300 irq=7''"
+msgid "class of hardware device"
+msgstr "rautatason laiteluokka"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Voit nyt m盲盲ritt盲盲 moduulin %s optiot.\n"
-"Huomaa ett盲 osoite t盲ytyy m盲盲ritt盲盲 '0x' etuliitteell盲, esim. 0x123."
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(moduuli %s)"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Asetan ajuria %s ohjaimelle %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Katso laitteistotietoja"
+"N盲m盲 ovat koneet ja verkot joissa paikallisesti liitetty tulostin pit盲isi "
+"olla k盲ytett盲viss盲."
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Onko koneessa %s liitynt盲盲?"
+msgid "United Kingdom"
+msgstr "Iso-Britannia"
-#: ../../modules/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "Onko sinulla muita?"
+msgid "running"
+msgstr "k盲ynniss盲"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "L枚ysin %s %s liit盲nn盲t"
+msgid "default"
+msgstr "oletus"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Voit m盲盲ritt盲盲 moduulin jokaisen parametrin t盲盲ll盲."
+msgid "Indonesia"
+msgstr "Indonesia"
-# Asennuksen sivuvalikko
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "comma separated strings"
-msgstr "pilkulla erotettuja merkkijonoja"
+msgid "France [SECAM]"
+msgstr "Ranska [SECAM]"
-#: ../../modules/parameters.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "pilkulla erotettuja numeroita"
+msgid "restrict"
+msgstr "rajoita"
-#: ../../modules/parameters.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d pilkulla erotettuja merkkijonoja"
+msgid "must have"
+msgstr "pakollinen"
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d pilkulla erotettuja numeroita"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS ei tue tulostimia, jotka ovat Novell-palvelimissa, tai jotka l盲hett盲v盲t "
+"dataa vapaamuotoiseen komentoon.\n"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "a number"
-msgstr "numero"
+msgid "Senegal"
+msgstr "Senegal"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Tarvitset alcatel:in mikrokoodin.\n"
-"Voit hakea sen osoitteesta: \n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"ja kopioi tiedosto 'mgmt.o' hakemistoon '/usr/share/speedtouch'"
+msgid "Command line"
+msgstr "Komentorivi"
-#: ../../network/adsl.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Yleisin tapa liitty盲 adsl-verkkoon on k盲ytt盲盲 pppoe:a.\n"
-"Jotkin yhteydet k盲ytt盲v盲t pptp:t盲, muutamat dhcp:t盲.\n"
-"Jos et tied盲 mit盲 valita, valitse 'k盲yt盲 pppoe'"
+"T盲ydellinen tuotelinjamme Linux-ratkaisuista, sek盲 erikoistarjouksia "
+"tuotteista ja muista \"herkuista\" on saatavilla online e-kaupastamme:"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Yhdist盲 Internettiin"
+msgid "access to administrative files"
+msgstr "oikeudet yll盲pidollisiin tiedostoihin"
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (k盲ytt盲en pppoa) usb"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Virhe sendmail:in aikana.\n"
+" Raporttiviesti盲si ei l盲hetetty.\n"
+" Ole hyv盲 ja aseta sendmail"
-#: ../../network/adsl.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", monik盲ytt枚laite rinnakkaisportissa \\#%s"
-#: ../../network/adsl.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "k盲yt盲 dhpc:t盲"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Parametrit: (val)\n"
+"\n"
+"Asettaa komentotulkin aikaviiveen. Arvo 0 (nolla) poistaa aikaviiveen."
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "use pptp"
-msgstr "k盲yt盲 pptp:t盲"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../network/adsl.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "k盲yt盲 pppoe:t盲"
+msgid "Automatic dependencies"
+msgstr "Automaattiset riippuvuudet"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Other ports"
-msgstr "Muut portit"
+msgid "Swap"
+msgstr "Sivutus"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Kaikki (ei palomuuria)"
+msgid "Connecting to the Internet "
+msgstr "Avaan Internetyhteyden "
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Virheellinen portti annettu: %s.\n"
-"Oikea muoto on \"portti/tcp\" tai \"portti/udp\",\n"
-"jossa portti on 1 ja 65535 v盲lill盲."
+msgid "Restore Other"
+msgstr "Palauta muut"
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Voit sy枚tt盲盲 sekalaiset portit.\n"
-"Toimivat esimerkit ovat: 139/tcp 139/udp.\n"
-"Katso /etc/services saadaksesi lis盲盲 tietoa."
+msgid "TV card"
+msgstr "TV-kortti"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Mitk盲 palvelut haluat olevan k盲ytett盲viss盲 Internetist盲?"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Tulostin SMB/Windows 95/98/NT -palvelimella"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall asetusty枚kalu\n"
-"\n"
-"Varmista ett盲 olet m盲盲ritt盲nyt verkkosi/Internetyhteytesi k盲ytt盲m盲ll盲\n"
-"drakconnect:a ennen kuin jatkat."
+msgid ", "
+msgstr ","
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
+"Arguments: (umask)\n"
"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"Set the root umask."
msgstr ""
-"drakfirewall asetusty枚kalu\n"
+"Parametrit: (umask)\n"
"\n"
-"T盲m盲 asettaa henkil枚kohtaisen palomuurin t盲h盲n Mandrake Linux koneeseen.\n"
-"Jos haluat vahvan omistetun palomuuri-ratkaisun ,voit katsoa erikoistettua\n"
-"MandrakeSecurity Firewall jakelua."
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "No network card"
-msgstr "Ei verkkokorttia"
+"Aseta root umask."
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP- ja IMAP-palvelin"
+msgid "Remove selected host/network"
+msgstr "Poista valittu kone/verkko"
-#: ../../network/drakfirewall.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mail Server"
-msgstr "S盲hk枚postipalvelin"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix on s盲hk枚postin siirtoagentti, eli ohjelma joka v盲litt盲盲 postia "
+"koneelta toiselle."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Verkkoalueen nimipalvelin (DNS)"
+msgid "Disconnection from the Internet failed."
+msgstr "Internetyhteyden katkaiseminen ei onnistunut."
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Webbipalvelin"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"T盲ss盲 voit valita n盲pp盲imen tai n盲pp盲inyhdistelm盲n joka sallii\n"
+"vaihtamisen eri n盲pp盲inkarttojen v盲lill盲 (esim. latin ja ei-latin)"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf konenimi ei saa sis盲lt盲盲 . (pistett盲)."
+msgid "Network Hotplugging"
+msgstr "Verkon pikakytkent盲 (Hotplugging)"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Host name"
-msgstr "Koneen nimi"
+msgid "if set to yes, reports check result to tty."
+msgstr "jos asetettu, raportoi tarkistuksen tulokset n盲yt枚lle."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf konenimi"
+msgid "Restore From CD"
+msgstr "Palauta CD-levylt盲"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"Olet aikeissa asettaa tietokoneesi jakamaan Internetyhteyden muiden koneiden "
+"kanssa.\n"
+"T盲ll盲 ominaisuudella muut paikallisverkossa olevat tietokoneet voivat "
+"k盲ytt盲盲 t盲m盲n tietokoneen Internetyhteytt盲.\n"
"\n"
+"Varmista ett盲 olet m盲盲ritt盲nyt verkkosi/Internetyhteytesi k盲ytt盲m盲ll盲 "
+"drakconnect:a ennen kuin jatkat.\n"
"\n"
-"Sy枚t盲 Zeroconf konenimi ilman pistett盲 jos et \n"
-"halua k盲ytt盲盲 oletus koneenime盲."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Asetan verkkoa"
+"Huomaa: tarvitset erityisen verkkokortin pystytt盲盲ksesi oman paikallisverkon."
#: ../../network/ethernet.pm:1
#, c-format
@@ -9831,2501 +8590,2693 @@ msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr "Valitse mit盲 verkkokorteista haluat k盲ytt盲盲 Internetiin liittymiseen"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Valitse verkkoliit盲nt盲"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Kuva-muistikortin k盲ytt枚 HP monitoimilaitteissasi"
-#: ../../network/ethernet.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
msgstr ""
-"Ethernet-verkkokorttia ei l枚ytynyt j盲rjestelm盲st盲.\n"
-"En voi asentaa t盲m盲n tyyppist盲 yhteytt盲."
+"Kohota tietokoneesi suorituskyky盲 valittujen yrityksien avulla jotka "
+"tarjoavat ammattimaisia ratkaisuja jotka ovat yhteensopivia Mandrake "
+"Linuxin kanssa."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Mit盲 dhcp-asiakasohjelmaa haluat k盲ytt盲盲?\n"
-"Oletus on dhcp-client"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Internetyhteyden jakaminen ei ole en盲盲 k盲yt枚ss盲."
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI-korttia ei l枚ydetty. Valitse yksi seuraavasta ruudusta."
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "jos asetettu, tarkistetaan 'suid/sgid' tiedostojen tarkistussumma."
-#: ../../network/isdn.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Olen havainnut ISDN PCI-kortin, mutta en tunnista tyyppi盲. Valitse yksi "
-"seuraavassa ruudussa olevista korteista."
+msgid "Latin American"
+msgstr "Latinalainen Amerikka"
-#: ../../network/isdn.pm:1
+# Asennuksen sivuvalikko
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Mik盲 n盲ist盲 on ISDN-korttisi?"
+msgid "Japanese text printing mode"
+msgstr "Japaninkielen tekstitulostustila"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN asetus"
+msgid "Old device file"
+msgstr "Vanha laitetiedosto"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Abort"
-msgstr "Hylk盲盲"
+msgid "Info: "
+msgstr "Tietoja: "
-#: ../../network/isdn.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Continue"
-msgstr "Jatka"
+msgid "Button `%s': %s"
+msgstr "Painike '%s': %s"
-#: ../../network/isdn.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Jos sinulla on ISA-kortti, seuraavien arvojen pit盲isi olla oikeat.\n"
-"\n"
-"Jos sinulla on PCMCIA-kortti sinun t盲ytyy tiet盲盲 korttisi \"IRQ\" ja \"IO"
-"\".\n"
+msgid "Please wait"
+msgstr "Odota hetki"
-#: ../../network/isdn.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "I don't know"
-msgstr "En tied盲"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "None"
+msgstr "Ei mit盲盲n"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "The entered IP is not correct.\n"
+msgstr "Sy枚tetty IP on virheellinen.\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Millainen kortti sinulla on?"
+msgid "Ethernet Card"
+msgstr "Verkkokortti"
-#: ../../network/isdn.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "L枚ysin \"%s\" liit盲nn盲n, haluatko k盲ytt盲盲 sit盲?"
+msgid "Info"
+msgstr "Tietoja"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Mit盲 protokollaa haluat k盲ytt盲盲?"
+msgid "Install"
+msgstr "Asenna"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Muun maailman k盲ytt盲m盲 protokolla"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Paina \"%s\" jos haluat tuhota kaiken t盲ll盲 kiintolevyll盲 olevan\n"
+"tiedon sek盲 osiot. Ole varovainen, sill盲 painettuasi \"%s\"\n"
+"et voi en盲盲 palauttaa mit盲盲n t盲ll盲 kiintolevyll盲 olleita tietoja ja "
+"osioita,\n"
+"mukaanlukien kaikki Windows-tiedostot.\n"
+"\n"
+"Paina \"%s\" keskeytt盲盲ksesi t盲m盲n toiminnon ilman ett盲\n"
+"menet盲t mit盲盲n kiintolevyll盲 ollutta tietoa ja osioita."
-#: ../../network/isdn.pm:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Lopeta asennus"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Muun maailman k盲ytt盲m盲 protokolla \n"
-"Ei D-kanavaa (vuokra-linjat)"
+"Kaikki asetettu.\n"
+"Voit nyt jakaa Internetyhteyden muiden l盲hiverkon koneiden kanssa "
+"k盲ytt盲m盲ll盲 automaattista l盲hiverkon m盲盲rittely盲 (DHCP)."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Eurooppalainen protokolla"
+msgid "Remote CUPS server"
+msgstr "Ulkoinen CUPS-palvelin"
-#: ../../network/isdn.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Eurooppalainen protokolla (EDSS1)"
+msgid "Sun - Mouse"
+msgstr "Sun - Hiiri"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-"Valitse palveluntarjoajasi.\n"
-"Jos se ei ole listassa, valitse `Ei listattu'"
+"Tietokoneessasi on vain yksi verkkokortti:\n"
+"\n"
+"%s\n"
+"\n"
+"Valmistaudun asettamaan l盲hiverkkosi asetukset kyseiselle laitteelle."
-#: ../../network/isdn.pm:1
+# Asennuksen sivuvalikko
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Ulkoinen ISDN-modeemi"
+msgid "Minimal install"
+msgstr "Minimaalinen asennus"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Sis盲inen ISDN-kortti"
+msgid "Ethiopia"
+msgstr "Etiopia"
-#: ../../network/isdn.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Mink盲lainen ISDN-yhteytesi on?"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Verkkoasetusten velho"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- pci-laitteet: t盲m盲 kertoo PCI-korttipaikan, laitteen sek盲 kortin "
+"toiminnon\n"
+"- eide laitteet: t盲m盲 laite on joko orja- tai is盲nt盲laite\n"
+"- scsi laitteet: scsi-v盲yl盲 sek盲 scsi-laitteiden id:t"
-#: ../../network/isdn.pm:1
+# mat
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Vanha kokoonpano (isdn4net)"
+msgid "Total size: %d / %d MB"
+msgstr "Koko yhteens盲: %d / %d Mt"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Uusi kokoonpano (isdn-kevyt)"
+msgid "disabled"
+msgstr "ei k盲yt枚ss盲"
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Search for new scanners"
+msgstr "Etsi uusia kuvanlukijoita ..."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Disabling servers..."
+msgstr "Poistan palvelut k盲yt枚st盲..."
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"Valitse per盲kk盲isten\n"
+"varmuuskopioiden aikav盲li"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s:n asennus ep盲onnistui. Seuraava virhe tapahtui:"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "En voi suorittaa mkinitrd -f /boot/initrd-%s.img %s."
+
+#: ../../install_any.pm:1
+#, c-format
+msgid ""
+"You have selected the following server(s): %s\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
"\n"
-"We recommand the light configuration.\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-"Mit盲 ISDN-asetuksia haluat k盲ytt盲盲?\n"
+"Olet valinnut seuraavat palvelimet: %s\n"
"\n"
-"* Vanha asetusj盲rjestelm盲 k盲ytt盲盲 isdn4net:i盲. Se sis盲lt盲盲 tehokkaat\n"
-" ty枚kalut, mutta on vaikea asettaa, eik盲 se ole standardi.\n"
"\n"
-"* Uusi asetusj盲rjestelm盲 on helpompi ymm盲rt盲盲, enemm盲n k盲yt枚ss盲,\n"
-" mutta se sis盲lt盲盲 v盲hemm盲n ty枚kaluja.\n"
+"N盲m盲 palvelimet otetaan oletuksena k盲ytt枚枚n. Niiss盲 ei ole tunnettuja \n"
+"turvallisuusaukkoja, mutta sellaisia voi l枚yty盲 ajan mittaan. Mik盲li niin \n"
+"tapahtuu, sinun pit盲isi p盲ivitt盲盲 kyseiset palvelimet niin nopeasti kuin \n"
+"suinkin mahdollista.\n"
"\n"
-"Suositus on k盲ytt盲盲 uutta ja kevyemp盲盲 asetusj盲rjestelm盲盲.\n"
+"\n"
+"Haluatko todella asentaa n盲m盲 palvelimet?\n"
-#: ../../network/modem.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "J盲t盲 tekem盲tt盲"
+msgid "Network printer (TCP/Socket)"
+msgstr "Verkkotulostin (TCP/Socket)"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install rpm"
-msgstr "Asenna rpm"
+msgid "Backup User files..."
+msgstr "Varmuuskopioi k盲ytt盲j盲tiedostot..."
-#: ../../network/modem.pm:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"\"%s\" perustuva winmodeemi tunnistettu, haluatko asentaa tarvittavat "
-"ohjelmistot?"
+msgid "Install system"
+msgstr "Asenna j盲rjestelm盲"
-#: ../../network/modem.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Title"
-msgstr "Nimike"
+msgid "First DNS Server (optional)"
+msgstr "Ensimm盲inen nimipalvelin (ei pakollinen)"
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"Modeemisi ei ole tuettu t盲ss盲 j盲rjestelm盲ss盲.\n"
-"Katso osoitteesta http://www.linmodems.org/"
+"Vaihtoehtoisesti voit sy枚tt盲盲 laitteen tai tiedoston nimen sy枚teriville"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Toinen nimipalvelin (ei pakollinen)"
+msgid "dhcpd Config..."
+msgstr "dhcpd:n asetus..."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Ensimm盲inen nimipalvelin (ei pakollinen)"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
+"Asetukset on jo tehty, mutta ne ovat t盲ll盲 hetkell盲 poistettu k盲yt枚st盲."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Verkkoalueen nimi"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub asennus"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Israeli"
+msgstr "Israel"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Script-based"
-msgstr "Script-pohjainen"
+msgid "load setting"
+msgstr "lataa asetukset"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Terminaalipohjainen"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Tulostin \"%s\" palvelimella \"%s\""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Floppy can be removed now"
+msgstr "Voit poistaa levykkeen nyt"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+# Asennuksen sivuvalikko
+#: ../../help.pm:1
#, c-format
-msgid "Login ID"
-msgstr "K盲ytt盲j盲 ID"
+msgid "Truly minimal install"
+msgstr "Todella minimaalinen asennus"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "Puhelinnumero"
+msgid "Denmark"
+msgstr "Tanska"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Yhteyden nimi"
+msgid "Moving partition..."
+msgstr "Siirr盲n osiota..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dialup options"
-msgstr "Soittoasetukset"
+msgid "(This) DHCP Server IP"
+msgstr "(T盲m盲n) DHCP-palvelimen IP-osoite"
-#: ../../network/modem.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Valitse sarjaportti, johon modeemisi on kytketty."
+msgid "Test of the configuration"
+msgstr "Kokeile asetuksia"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Verkon asetukset"
+msgid "Installing %s ..."
+msgstr "Asennetaan %s ..."
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Ongelmia asettamisen aikana.\n"
-"Testaa yhteytesi net_monitor- tai mcc-ty枚kalulla. Jos yhteytesi ei toimi, "
-"voit k盲ynnist盲盲 asetusty枚kalun uudelleen"
+"Jos valitsit mahdollisuuden valita yksitt盲isi盲 paketteja, sinulle\n"
+"n盲ytet盲盲n hakemistopuu, jossa kaikki paketit ovat luokiteltuina\n"
+"ryhmien ja alaryhmien mukaan. Kun selaat puuta, voit valita koko\n"
+"ryhm盲t, alaryhm盲t tai yksitt盲iset paketit.\n"
+"\n"
+"Kun valitset paketin hakemistopuussa, sen kuvaus n盲kyy oikean-\n"
+"puoleisessa ikkunassa, jotta tiet盲isit paketin tarkoituksen.\n"
+"\n"
+"!! Jos palvelinpaketti on valittu, joko tarkoituksella tai koska se kuului\n"
+"johonkin valitsemaasi ryhm盲盲n, sinulta pyydet盲盲n vahvistusta,\n"
+"haluatko varmasti asentaa palvelimen. Oletuksena Mandrake Linux\n"
+"k盲ynnist盲盲 jokaisen asennetun palvelin koneen k盲ynnistyksen\n"
+"yhteydess盲. Vaikka ne ovat turvallisia eik盲 niill盲 ole tunnettuja\n"
+"ongelmia jakelun julkaisuajankohtana, niist盲 voi l枚yty盲 turvallisuus-\n"
+"reiki盲 jakelun valmistumisen j盲lkeen. Jos et tied盲 mihin joku tietty\n"
+"palvelu on tarkoitettu, tai miksi sit盲 asennetaan, paina \"%s\". Jos\n"
+"painat \"%s\" listatut palvelut asennetaan sek盲 k盲ynnistet盲盲n\n"
+"automaattisesti oletuksena koneen k盲ynnistyksess盲 !!\n"
+"\n"
+"Optio \"%s\" est盲盲 virhedialogin\n"
+"joka ilmestyy joka kerta kun asennusohjelma automaattisesti\n"
+"valitsee paketin riippuvuuksien t盲ytt盲miseksi. Jotkut paketit sis盲lt盲v盲t\n"
+"riippuvuuksia jotka vaativat ett盲 joku toinen paketti on jo asennettu\n"
+"ennen kuin se voidaan asentaa. Asennusohjelma osaa itse huolehtia\n"
+"siit盲 ett盲 n盲m盲 riippuvuudet on t盲ytetty jotta asennus valmistuisi\n"
+"onnistuneesti.\n"
+"\n"
+"Listauksen alla olevalla levykkeen kuvakkeella voit hakea pakettilistan\n"
+"joka on luotu edellisess盲 asennuksessa. T盲m盲 on hy枚dyllist盲 jos\n"
+"sinulla on monta konetta joihin haluat suorittaa samanlaisen asennuksen.\n"
+"Jos painat t盲t盲 kuvaketta, sinua pyydet盲盲n asettamaan levyke joka on\n"
+"luotu toisen asennuksen lopussa. Katso edellisen vaiheen toisesta\n"
+"vihjeest盲, miten luot sellaisen levykkeen."
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kun t盲m盲 on tehty, suosittelemme k盲ynnist盲m盲盲n X-ymp盲rist枚n\n"
-"uudelleen v盲ltt盲盲ksesi j盲rjestelm盲n nimen vaihdoksesta koituvat ongelmat."
+msgid "Choose your filesystem encryption key"
+msgstr "Valitse tiedostoj盲rjestelm盲si salausavain"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"Onnittelut, verkko- ja Internetyhteyksien asetus on valmis.\n"
-"\n"
-"Asetukset otetaan nyt k盲ytt枚枚n j盲rjestelm盲ss盲.\n"
+"Ole hyv盲 ja valitse CD/DVD-laitteesi\n"
+"(paina Enter t盲ytt盲盲ksesi asetukset muihin kenttiin.\n"
+" T盲m盲 kentt盲 ei ole pakollinen, ainoastaan ty枚kalu\n"
+" lomakkeen t盲ytt盲miseen.)"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ongelma k盲ynnistett盲ess盲 verkkoa uudelleen: \n"
-"\n"
-"%s"
+msgid "Andorra"
+msgstr "Andorra"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Verkko pit盲盲 k盲ynnist盲盲 uudelleen. Haluatko tehd盲 sen nyt ?"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Verkon asetukset"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Haluatko ottaa yhteyden koneen k盲ynnistyksen yhteydess盲?"
+msgid "(default value: %s)"
+msgstr "(oletusarvo: %s)"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Internetyhteys"
+msgid "Alternative test page (Letter)"
+msgstr "Vaihtoehtoinen testisivu (Letter)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""
-"Olet asettanut useita eri tapoja ottaa yhteys Internetiin.\n"
-"Valitse se, jota haluat k盲ytt盲盲.\n"
+"DHCP-palvelimen asettaminen.\n"
+"\n"
+"T盲盲lt盲 voit valita erilaiset optiot DHCP-palvelimen asettamiseen.\n"
+"Jos et tied盲 jonkun option tarkoitusta, j盲t盲 se oletusarvoonsa.\n"
"\n"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Valitse yhteys, jonka haluat asettaa"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
-msgstr "seuraavat ethernet-verkkokortit l枚ydetty"
-
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "L盲hiverkko"
+msgid "Choose an X server"
+msgstr "Valitse X-palvelin"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "cable connection detected"
-msgstr "Kaapeliyhteys havaittu"
+msgid "Swap partition size in MB: "
+msgstr "Sivutusosion koko Mt: "
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cable connection"
-msgstr "Kaapeliyhteys"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
+"Muut (ei drakbackup)\n"
+"avaimet ovat jo paikallaan"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "l枚ydetty"
+msgid "No changes to backup!"
+msgstr "Ei varmistettavia muutoksia!"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "ADSL-yhteys"
+msgid "Formatted\n"
+msgstr "Alustettu\n"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "detected %s"
-msgstr "l枚ydetty %s"
+msgid "Type of install"
+msgstr "Asennuksen tyyppi"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-yhteys"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Tulostin \"%s\" SMB/Windows palvelimella \"%s\""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Winmodeemi-yhteys"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Demoni (%s) sis盲lt盲盲 :\n"
-#: ../../network/netconnect.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "l枚ydetty portista %s"
+msgid "%d comma separated numbers"
+msgstr "%d pilkulla erotettuja numeroita"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Tavallinen modeemiyhteys"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"Rusers-protokolla antaa verkon k盲ytt盲jille mahdollisuuden\n"
+"tunnistaa, ketk盲 ovat kirjautuneina eri koneissa."
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Etsin laitteita...."
+msgid "Automatic Steps Configuration"
+msgstr "Automaattisten vaiheiden asetus"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Expert Mode"
-msgstr "Asiantuntijatila"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"Haluatko tiet盲盲 enemm盲n Avoimen L盲hdekoodin yhteis枚st盲? Tule osalliseksi "
+"Vapaan Ohjelmiston maailmaan!"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "K盲yt盲 automaattista tunnistusta"
+msgid "Barbados"
+msgstr "Barbados"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Valitse profiili jonka haluat asettaa"
+msgid "Please select data to backup..."
+msgstr "Valitse varmuuskopioitava tieto..."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-"Tervetuloa verkon asettamisvelhoon\n"
-"\n"
-"Seuraavassa vaiheessa m盲盲ritell盲盲n Internet- / verkkoasetuksesi.\n"
-"Jos et halua k盲ytt盲盲 automaattista tunnistusta, poista kyseinen valinta.\n"
+"Yhteys ep盲onnistui.\n"
+"Tarkista asetukset Mandraken Ohjauskeskuksessa."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Koska asennat k盲ytt枚j盲rjestelm盲盲 verkon yli, verkon asetukset on jo "
-"m盲盲ritelty.\n"
-"Paina OK s盲ilytt盲盲ksesi nykyiset asetukset tai peruuta asettaaksesi "
-"Internet- ja verkkoasetukset uudelleen.\n"
+msgid "received"
+msgstr "vastaanotettu"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Asetamme seuraavaksi %s-yhteyden.\n"
-"\n"
-"\n"
-"Paina OK jatkaaksesi."
+msgid "/File/_New"
+msgstr "/Tiedosto/_Uusi"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Asetamme seuraavaksi %s-yhteyden."
+msgid "The DNS Server IP"
+msgstr "DNS-palvelimen IP-osoite"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetyhteyden muodostus ja asetukset"
+msgid "IP Range End:"
+msgstr "IP-alueen loppu:"
-# Asennuksen sivuvalikko
-#: ../../network/netconnect.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Aseta verkkoyhteys"
+msgid "High"
+msgstr "Korkea"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "Katkaise yhteys"
+msgid "NoVideo"
+msgstr "Ei n盲ytt枚盲"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "T盲m盲 kentt盲 kuvaa laitteen"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect"
-msgstr "Yhdist盲"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Lis盲t盲盲n tulostin Star Office/OpenOffice.org/GIMP k盲ytt枚枚n."
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Voit asettaa yhteytesi uudelleen."
+msgid "Local Printers"
+msgstr "Paikalliset tulostimet"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko ottaa yhteyden Internettiin tai asettaa yhteyden uudelleen."
+msgid "Installation image directory"
+msgstr "Asennus-kuvatiedoston hakemisto"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Et ole juuri nyt yhteydess盲 Internettiin."
+msgid "NIS Server"
+msgstr "NIS-palvelin"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
+msgid "Port: %s"
+msgstr "Portti: %s"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Olet parasta aikaa yhteydess盲 Internettiin."
+msgid "Spain"
+msgstr "Espanja"
-#: ../../network/network.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteell盲 'ftp:' tai 'http:'"
+msgid "This user name has already been added"
+msgstr "K盲ytt盲j盲tunnus on jo lis盲tty"
-#: ../../network/network.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "V盲lityspalvelimen tulee olla muotoa http://..."
+msgid "Choose a file"
+msgstr "Valitse tiedosto"
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "FTP proxy"
-msgstr "FTP-v盲lityspalvelin:"
+msgid "Apply"
+msgstr "Toteuta"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP-v盲lityspalvelin:"
+msgid "Auto-detect available ports"
+msgstr "Porttien automaattitunnistus"
-#: ../../network/network.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Proxies configuration"
-msgstr "V盲lityspalvelimien asettaminen"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Internetyhteyden jakaminen ei ole k盲yt枚ss盲"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Yhdysk盲yt盲v盲n osoite pit盲盲 olla muotoa 1.2.3.4"
+msgid "San Marino"
+msgstr "San Marino"
-#: ../../network/network.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS palvelimen osoite pit盲盲 olla muotoa 1.2.3.4"
+msgid "Belgium"
+msgstr "Belgia"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway device"
-msgstr "Yhdysk盲yt盲v盲n laite"
+msgid "Kuwait"
+msgstr "Kuwait"
-#: ../../network/network.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Yhdysk盲yt盲v盲 (esim. %s)"
+msgid "Choose the window manager to run:"
+msgstr "Valitse k盲ytett盲v盲 ikkunointij盲rjestelm盲:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Prosessorin alasukupolvi"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "DNS server"
-msgstr "Nimipalvelin"
+msgid "First Time Wizard"
+msgstr "Aloittelija-velho"
-#: ../../network/network.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Sy枚t盲 koneesi nimi.\n"
-"Koneesi nimen pit盲isi olla t盲ydellinen, kuten ``minunkone.yritys.fi''.\n"
-"Voit antaa my枚s yhdysk盲yt盲v盲n IP-osoitteen jos sinulla on sellainen."
+"Tapahtui virhe, eik盲 sit盲 ei voida k盲sitell盲 kunnolla.\n"
+"Jatka omalla vastuullasi."
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "odota hetki, j盲senn盲n tiedostoa: %s"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Taiwan"
+msgstr "Taiwan"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Pakistan"
+msgstr "Pakistan"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"Nopeuden pit盲isi loppua p盲盲tteeseen k, M tai G (esim. \"11M\" jos nopeus\n"
-"on 11M) tai sinun pit盲盲 lis盲t盲 riitt盲v盲sti '0' (nollia) loppuun."
+"Voidaksesi tulostaa Lexmark Inkjet tulostimellasi n盲ill盲 asetuksilla, "
+"tarvitset Lexmark:in tuottamat ajurit (http://www.lexmark.com/). Paina "
+"\"Drivers\" linkki. Valitse sen j盲lkeen tulostinmallisi ja \"Linux\" "
+"k盲ytt枚j盲rjestelm盲. Ajurit tulevat RPM-pakettina tai komentoskriptein盲 "
+"interaktiivisella graafisella asennuksella. Sinun ei tarvitse asettaa "
+"tulostinta graafisella k盲ytt枚liittym盲ll盲. Peruuta heti lisenssisopimuksen "
+"j盲lkeen. Sitten voit tulostaa tulostinp盲iden kohdistussivut \"lexmarkmaintain"
+"\" ohjelmalla ja s盲盲t盲盲 kohdistusasetukset kohdalleen."
-#: ../../network/network.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Permissions"
+msgstr "Oikeudet"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider name (ex provider.net)"
+msgstr "Palveluntarjoajan nimi (esim.: tarjoaja.fi)"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Version: %s\n"
+msgstr "Versio: %s\n"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Taajuuden pit盲isi loppua p盲盲tteeseen k, M tai G (esim. \"2.46G\" jos "
-"taajuus\n"
-"on 2.46 GHz) tai sinun pit盲盲 lis盲t盲 riitt盲v盲sti '0' (nollia) loppuun."
+"J盲rjestelm盲si resurssit ovat lopussa. Voit kohdata ongelmia Mandrake Linuxia "
+"asentaessasi.\n"
+"Jos n盲in tapahtuu, voit kokeilla tekstipohjaista asennusta. Tehd盲ksesi niin "
+"paina `F1' kun\n"
+"k盲ynnist盲t asennusohjelmaa CD-ROM:lta. T盲m盲n j盲lkeen kirjoita `text'."
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-osoitteen tulee olla muotoa 1.2.3.4"
+msgid "Use the Windows partition for loopback"
+msgstr "K盲yt盲 Windows-osiota loopback-tiedostona"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "K盲ynnist盲 koneen k盲ynnistyksen yhteydess盲"
+msgid "Armenian (typewriter)"
+msgstr "Armeenia (kirjoituskone)"
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "My枚nn盲 koneennimi DHCP osoitteesta"
+msgid "Connection type: "
+msgstr "Yhteyden nimi: "
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Verkon pikakytkent盲 (Hotplugging)"
+msgid "Graphical interface"
+msgstr "Graafinen k盲ytt枚liittym盲"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Selvit盲 verkkokortti-id (hy枚dyllist盲 sylimikroille)"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s laitteistokiihdytetyll盲 3D-tuella"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DHCP host name"
-msgstr "DHCP kone nimi"
+msgid "India"
+msgstr "Intia"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Verkkopeite"
+msgid "Chad"
+msgstr "Tsad"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP address"
-msgstr "IP-osoite"
+msgid "Slovakia"
+msgstr "Slovakia"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "Singapore"
+msgstr "Singapore"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "Automaattinen IP"
+msgid "Cambodia"
+msgstr "Kambodza"
-#: ../../network/network.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (ajuri %s)"
+msgid "Monitor HorizSync: %s\n"
+msgstr "N盲yt枚n vaakajuovataajuus: %s\n"
-#: ../../network/network.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Asetan verkkolaitetta %s"
+msgid "Path"
+msgstr "Polku"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Anna koneen IP-asetukset. Kukin kohta tulee sy枚tt盲盲 IP-osoitteena,\n"
-"pisteill盲 eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."
+"T盲盲ll盲 voit m盲盲ritt盲盲 haluamasi komentorivin johon tulostusty枚 putkitetaan "
+"suoraan tulostimelle l盲hett盲misen sijasta"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"VAROITUS: T盲m盲 laite on aikaisemmin m盲盲ritelty Internetyhteyden "
-"muodostamiseen.\n"
-"Hyv盲ksy, jos haluat pit盲盲 laitteen asetukset sellaisina kuin ne olivat.\n"
-"Alla olevien kohtien muokkaaminen korvaa voimassa olevat asetukset."
+"Tulostusj盲rjestelm盲盲 (%s) ei k盲ynnistet盲 automaattisesti kun kone "
+"k盲ynnistet盲盲n.\n"
+"\n"
+"On mahdollista ett盲 automaattik盲ynnistys on poistettu k盲yt枚st盲 "
+"turvallisuustason nostamisen takia, koska tulostusj盲rjestelm盲 on mahdollinen "
+"hy枚kk盲yskohta.\n"
+"\n"
+"Haluatko ottaa uudestaan k盲ytt枚枚n tulostusj盲rjestelm盲n "
+"automaattik盲ynnistyksen?"
-#: ../../network/shorewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
-"Varoitus! Olemassaoleva palomuuri l枚ydetty. Tarvitset mahdollisesti k盲sin "
-"teht盲vi盲 korjauksia asennuksen j盲lkeen."
+"Tulostin %s\n"
+"Mit盲 haluat muokata t盲st盲 tulostimesta?"
-#: ../../network/shorewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Palomuurin asetukset l枚ydetty!"
+msgid "Add host"
+msgstr "Lis盲盲 kone"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Salasana"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Jos todellakin uskot tiet盲v盲si mik盲 ajuri on oikea 盲盲nikortillesi \n"
+"voit valita yhden yll盲 olevasta listasta.\n"
+"\n"
+"Nykyinen ajuri 盲盲nikortillesi \"%s\" on \"%s\" "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "K盲ytt盲j盲tunnus (k盲ytt盲j盲n nimi)"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Haluatko sallia k盲ytt盲jien jakaa joitakin omia hakemistoja?\n"
+"Sallimalla t盲m盲n k盲ytt盲jien tarvitsee vain painaa \"Jakaa\"\n"
+"Konquerorissa tai Nautiluksessa\n"
+"\n"
+"\"Mukautettu\" sallii k盲ytt盲j盲kohtaiset oikeudet.\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Yhteyden aikaraja (sekunneissa)"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Lataa tai tallenna pakettien valinta levykkeelle.\n"
+"Muoto on sama kuin auto_install-toiminnon luomilla levykkeill盲."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Connection speed"
-msgstr "Yhteyden nopeus"
+msgid "China (broadcast)"
+msgstr "Kiina (bcast)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dialing mode"
-msgstr "Soittotila"
+msgid "Use quota for backup files."
+msgstr "K盲yt盲 quotaa varmuuskopiotiedostoille."
-# Asennuksen sivuvalikko
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Valitse maasi"
+msgid "Configuring printer \"%s\"..."
+msgstr "Asetetaan tulostinta \"%s\" ..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Yhteydentarjoajan聽dns聽2聽(vapaaehtoinen)"
+msgid "Internet connection"
+msgstr "Internetyhteys"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Yhteydentarjoajan dns 1 (vapaaehtoinen)"
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"Moduulin %s lataaminen ep盲onnistui.\n"
+"Haluatko yritt盲盲 muilla asetuksilla?"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Provider phone number"
-msgstr "Palveluntarjoajan puhelinnumero"
+msgid "Welcome to the Open Source world."
+msgstr "Tervetuloa Avoimen L盲hdekoodin maailmaan"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Palveluntarjoajan nimi (esim.: tarjoaja.fi)"
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnia ja Herzegovina"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Henkil枚kohtainen puhelinnumerosi"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"Tarvitset oikean tiedostoj盲rjestelm盲n (ext2/ext3, ReiserFS, XFS tai JFS) "
+"t盲lle liitospisteelle.\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Card IO_1"
-msgstr "Kortin IO_1"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Sinun pit盲盲 sy枚tt盲盲 verkkoaseman nimi tai IP-osoite.\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "Kortin IO_0"
+msgid "Netherlands"
+msgstr "Alankomaat"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO"
-msgstr "Kortin IO"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "L盲het盲n tiedostoja..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kortin muisti (DMA)"
+msgid "Internal ISDN card"
+msgstr "Sis盲inen ISDN-kortti"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "Kortin IRQ"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Tunnettua vaihtoehtoista OSS/ALSA ajuria 盲盲nikortillesi (%s), joka t盲ll盲 "
+"hetkell盲 k盲ytt盲盲 \"%s\", ei ole"
-#: ../../network/tools.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "T盲yt盲 tai tarkista alla olevat kent盲t."
+msgid "Title"
+msgstr "Nimike"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Yhteyden asetus"
+msgid "Install & convert Fonts"
+msgstr "Asenna & muunna kirjasimia"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"J盲rjestelm盲 ei n盲yt盲 olevan yhdistynyt Internettiin.\n"
-"Kokeile muuttaa Internet-asetuksia."
+msgid "WARNING"
+msgstr "VAROITUS"
-#: ../../network/tools.pm:1
+# Asennuksen sivuvalikko
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Turvallisuussyist盲 yhteys suljetaan nyt."
+msgid "Installing bootloader"
+msgstr "Asennan k盲ytt枚j盲rjestelm盲n lataajaa"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "J盲rjestelm盲 on nyt yhdistetty Internettin."
+msgid "replay"
+msgstr "toista"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Testaan yhteytt盲si..."
+msgid "detected %s"
+msgstr "l枚ydetty %s"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Haluatko kokeilla Internetyhteytt盲 nyt?"
+msgid "Virgin Islands (U.S.)"
+msgstr "Yhdysvaltain Neitsytsaaret"
-#: ../../network/tools.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Internet configuration"
-msgstr "Internet-asetukset"
+msgid "Bad backup file"
+msgstr "Huono varmuuskopiotiedosto"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Jotakin kamalaa on tapahtunut kiintolevyllesi.\n"
-"Tiedon oikeellisuuden tarkistus ep盲onnistui.\n"
-"T盲m盲 tarkoittaa ett盲 kaikki asemalle kirjoitettu\n"
-"tieto muuttuu tunnistamattomaksi."
-
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Default)"
-msgstr " (Oletus)"
-
-#: ../../printer/cups.pm:1
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-palvelimella \"%s\""
+"Internetyhteyden jakaminen on jo asetettu.\n"
+"Sen nykyinen tila on: ei k盲yt枚ss盲\n"
+"\n"
+"Mit盲 haluat tehd盲?"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Et盲tulostimet"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "Sy枚t盲 sen koneen IP-osoite ja portti jonka tulostimia haluat k盲ytt盲盲."
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Pipe into command"
+msgstr "Putkita ty枚 komennolle"
-#: ../../printer/cups.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(t盲ll盲 koneella)"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Jokin osa laitteistoasi tarvitsee laitteistovalmistajan ajurit toimiakseen "
+"kunnolla.\n"
+"Voit l枚yt盲盲 lis盲tietoja edell盲 mainituista t盲盲lt盲: %s"
-#: ../../printer/cups.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(%s:ssa)"
+msgid "Detecting devices..."
+msgstr "Etsin laitteita...."
-#: ../../printer/data.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Yleinen Unix Tulostusj盲rjestelm盲"
+msgid "Click here to launch the wizard ->"
+msgstr "Paina t盲h盲n k盲ynnist盲盲ksesi asennusohjelman ->"
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Haiti"
+msgstr "Haiti"
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR uusi sukupolvi"
+msgid ""
+"Description of the fields:\n"
+"\n"
+msgstr "Kenttien kuvaus:\n"
-#: ../../printer/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "the name of the CPU"
+msgstr "Prosessorin nimi (CPU)"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - rivitulostus demoni"
+msgid "Refreshing printer data..."
+msgstr "P盲ivitet盲盲n tulostintietoja..."
-#: ../../printer/data.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "You must also format %s"
+msgstr "Sinun t盲ytyy my枚s alustaa %s"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tulosta, 盲l盲 jonota"
+msgid "Be careful: this operation is dangerous."
+msgstr "Varo: t盲m盲 on vaarallinen toiminto"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "Tuntematon malli"
+msgid "Insert a floppy containing package selection"
+msgstr "Aseta levyke, jossa on pakettien valinta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Unknown model"
-msgstr "Tuntematon malli"
+msgid "Server: "
+msgstr "Palvelin: "
-#: ../../printer/main.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (portti %s)"
+msgid "Security Alerts:"
+msgstr "Turvavaroitukset:"
-#: ../../printer/main.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Host %s"
-msgstr "Kone %s"
+msgid "Sweden"
+msgstr "Ruotsi"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network %s"
-msgstr "Verkko %s"
+msgid "Use Expect for SSH"
+msgstr "K盲yt盲 Expect SSH:lle"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Liit盲nt盲 \"%s\""
+msgid "Poland"
+msgstr "Puola"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "Paikallisverkko(ja)"
+msgid "Importance: %s\n"
+msgstr "T盲rkeys: %s\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Raakatulostin (ei ajuria)"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Valitse t盲m盲 jos haluat poistaa nauhan varmistuksen j盲lkeen"
-#: ../../printer/main.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", k盲ytt盲en komentoa %s"
+msgid "Other ports"
+msgstr "Muut portit"
-#: ../../printer/main.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " Novell palvelimella \"%s\", tulostin \"%s\""
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "mmap-kaappauspuskurien m盲盲r盲:"
-#: ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " SMB/Windows-palvelimella \"%s\", jako \"%s\""
+msgid "SMBus controllers"
+msgstr "SMBus-ohjaimet"
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP -palvelimella \"%s\", portissa %s"
+msgid "Connection timeout (in sec)"
+msgstr "Yhteyden aikaraja (sekunneissa)"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " LPD-palvelimella \"%s\", tulostin \"%s\""
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
+"Jotkut aikaisimmista i486DX-100 prosessoreista eiv盲t osaa luotettavasti "
+"palata k盲ytt枚tilaan \"halt\" k盲skyn j盲lkeen"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", tulostetaan kohteeseen: %s"
+msgid "Croatian"
+msgstr "Kroatia"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", monitoimilaite"
+msgid "Use existing partition"
+msgstr "K盲yt盲 olemassa olevia osioita"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", monitoimilaite HP JetDirectiss盲"
+msgid "Unable to contact mirror %s"
+msgstr "En saa yhteytt盲 peilipalvelimeen %s"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", monik盲ytt枚laite USB:ssa"
+msgid "/Help/_About..."
+msgstr "/Ohje/_Tietoja..."
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", monik盲ytt枚laite rinnakkaisportissa \\#%s"
+msgid "Remove user directories before restore."
+msgstr "Poista k盲ytt盲jien hakemistot ennen palauttamista."
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", USB tulostin"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Olet asettamassa et盲tulostinta. T盲m盲 vaatii toimivan verkkoyhteyden, mutta "
+"verkkosi ei ole viel盲 m盲盲ritetty. Mik盲li jatkat ilman verkkoasetusta, et voi "
+"k盲ytt盲盲 tulostinta jota olet nyt asettamassa. Miten haluat jatkaa?"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB tulostin \\#%s"
+msgid "CUPS printer configuration"
+msgstr "CUPS tulostus asetukset"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " rinnakkaisliit盲nn盲ss盲 \\#%s"
+msgid "could not find any font in your mounted partitions"
+msgstr "liitetyilt盲 osioilta ei l枚ytynyt ainoatakaan kirjasinta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Local Printers"
-msgstr "Paikalliset tulostimet"
+msgid "F00f bug"
+msgstr "F00F virhe"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Putkita ty枚 k盲skylle"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Sy枚t盲 tulostinlaitteen osoite (URI)"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Mit盲 dhcp-asiakasohjelmaa haluat k盲ytt盲盲?\n"
+"Oletus on dhcp-client"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Tulostin NetWare-palvelimella"
+msgid "Domain Name:"
+msgstr "Verkkoalueen nimi:"
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tulostin SMB/Windows 95/98/NT -palvelimella"
+msgid "On Floppy"
+msgstr "Levykkeell盲"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Verkkotulostin (TCP/Socket)"
+msgid "Restore"
+msgstr "Palauta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Tulostin et盲palvelimella (lpd)"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
+"jos asetettu, tarkistetaan ovatko verkkolaitteet 'promiscuous' tilassa."
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Tulostin et盲palvelimella (CUPS)"
+msgid "Looking for available packages..."
+msgstr "Etsin saatavilla olevia paketteja..."
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Et盲tulostin"
+msgid "Init Message"
+msgstr "K盲ynnistysviesti"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Paikallinen tulostin"
+msgid "Rescue partition table"
+msgstr "Pelasta osiotaulu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Asetetaan ohjelmia..."
+msgid "Connection complete."
+msgstr "Yhteys valmis."
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Cyprus"
+msgstr "Kypros"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Poistetaan tulostin \"%s\" ..."
+msgid "Remove from RAID"
+msgstr "Poista RAID:sta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Haluatko todella poistaa tulostimen \"%s\"?"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Salausavain on liian yksinkertainen (sen pit盲盲 olla ainakin %d merkki盲 pitk盲)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Remove printer"
-msgstr "Poista tulostin"
+msgid "Configuration Wizards"
+msgstr "Asetusvelhot"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Opi kuinka k盲ytt盲盲 t盲t盲 tulostinta"
+msgid "ISDN connection"
+msgstr "ISDN-yhteys"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Print test pages"
-msgstr "Tulosta testisivut"
+msgid "primary"
+msgstr "ensisijainen"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Tulostimen \"%s\" poistaminen Star Office/OpenOffice.org/GIMP k盲yt枚st盲 "
-"ep盲onnistui."
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " SMB/Windows-palvelimella \"%s\", jako \"%s\""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Tulostin \"%s\" poistettiin Star Office/OpenOffice.org/GIMP k盲yt枚st盲 "
-"onnistuneesti."
+"Voit nyt valita mitk盲 palvelut haluat k盲ynnist盲盲 konetta k盲ynnistett盲ess盲.\n"
+"\n"
+"DrakX listaa kaikki palvelut, jotka l枚ytyv盲t nykyisest盲 asennuksesta.\n"
+"K盲y lista l盲pi huolellisesti ja poista kaikki ne palvelut, joita ei tarvita\n"
+"jokaisella k盲ynnistyskerralla.\n"
+"\n"
+"Saat kustakin palvelusta lyhyen kuvaustekstin valitsemalla sen. Jos et\n"
+"kuitenkaan ole varma palvelun hy枚dyllisyydest盲, on yleens盲 varmempaa\n"
+"j盲tt盲盲 se oletusarvoiseksi.\n"
+"\n"
+"!! T盲ss盲 vaiheessa sinun pit盲盲 olla erityisen huolellinen, jos aiot k盲ytt盲盲\n"
+"konettasi palvelimena: et varmaankaan halua k盲ynnist盲盲 niit盲 palveluita,\n"
+"joita et tarvitse. Muista my枚s, ett盲 jotkin palvelut voivat olla "
+"vaarallisia, jos\n"
+"ne ovat aktivoituja palvelimessa. Yleens盲 kannattaa valita vain ne "
+"palvelut,\n"
+"joita todella tarvitaan !!"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Poistetaan tulostin Star Office/OpenOffice.org/GIMP k盲yt枚st盲."
+msgid "Skip"
+msgstr "Ohita"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Poista t盲m盲 tulostin Star Office/OpenOffice.org/GIMP k盲yt枚st盲."
+msgid "Niue"
+msgstr "Niue"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"Tulostimen \"%s\" lis盲盲minen Star Office/OpenOffice.org/GIMP k盲ytt枚枚n "
-"ep盲onnistui."
+"Aktivoi/Poistaa kaikki verkkoliittym盲t jotka on asetettu\n"
+"k盲ynnistyksess盲."
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-"Tulostin \"%s\" lis盲ttiin Star Office/OpenOffice.org/GIMP k盲ytt枚枚n "
-"onnistuneesti."
+"Prosessorin taajuus MHz:in盲 (Megahertzi盲 voidaan ensisilm盲yksell盲 karkeasti "
+"verrata teht盲vien m盲盲r盲盲n jotka prosessori suorittaa sekunnissa)"
-#: ../../printer/printerdrake.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Lis盲t盲盲n tulostin Star Office/OpenOffice.org/GIMP k盲ytt枚枚n."
+msgid "important"
+msgstr "t盲rke盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Lis盲盲 t盲m盲 tulostin Star Office/OpenOffice.org/GIMP k盲ytt枚枚n."
+msgid "Total Progress"
+msgstr "Kokonaisedistyminen"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tulostin \"%s\" on asetettu oletustulostimeksi."
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"Aluksi DrakX tunnistaa kaikki IDE-laitteet, jotka on kytketty "
+"j盲rjestelm盲盲si.\n"
+"Samalla my枚s tutkitaan l枚ytyyk枚 j盲rjestelm盲st盲 PCI SCSI -ohjaimia. Jos\n"
+"SCSI-ohjain l枚ytyy, asentaa DrakX tarvittavat ajurit.\n"
+"\n"
+"Koska laitteiston tunnistaminen ei ole idiootinvarma, DrakX voi\n"
+"ep盲onnistua. Siin盲 tapauksessa joudut m盲盲ritt盲m盲盲n laitteistosi\n"
+"itse.\n"
+"\n"
+"Jos sinun pit盲盲 m盲盲ritt盲盲 PCI SCSI -ohjaintasi, DrakX kysyy sinulta\n"
+"haluatko m盲盲ritt盲盲 ohjaimen asetuksia. Ehdotamme ett盲 sallit DrakX:n\n"
+"tunnistaa tarvittavat asetukset laitteiston alustamiseen. Yleens盲 DrakX\n"
+"suorittaa t盲m盲n toiminnon ongelmitta.\n"
+"\n"
+"Jos DrakX ei pystyk盲盲n tunnistamaan tarvittavia asetuksia joilla ohjain\n"
+"pit盲盲 alustaa, joudut itse sy枚tt盲m盲盲n ne ajurille."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Default printer"
-msgstr "Oletustulostin"
+msgid "Users"
+msgstr "K盲ytt盲j盲t"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Aseta t盲m盲 tulostin oletukseksi"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Tulostimen asetukset"
+msgid "Preparing bootloader..."
+msgstr "Valmistelen k盲ytt枚j盲rjestelm盲n lataajaa..."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Tulostimen valmistaja, malli"
+msgid "Gateway (e.g. %s)"
+msgstr "Yhdysk盲yt盲v盲 (esim. %s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Tulostimen valmistaja, malli, ajuri"
+msgid "The passwords do not match"
+msgstr "Salasanat poikkeavat toisistaan"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Poistetaan vanha tulostin \"%s\" ..."
+msgid "Examples for correct IPs:\n"
+msgstr "Esimerkkej盲 oikeista IP-osoitteista:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Tulostimen nimi, kuvaus, paikka"
+msgid "Frequency (MHz)"
+msgstr "Taajuus (MHz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Tulostusyhteyden tyyppi"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"K盲ytt盲盲ksesi t盲t盲 \"tallennetut paketit\" valintaa, k盲ynnist盲 asennus "
+"optiolla \"linux defcfg=floppy\""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Raw printer"
-msgstr "Raakatulostin"
+msgid "the number of the processor"
+msgstr "prosessorin numero"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Tee se!"
+msgid "Hardware clock set to GMT"
+msgstr "Laitteistokello asetettu GMT-aikaan"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Close"
-msgstr "Sulje"
+msgid "Give a file name"
+msgstr "Anna tiedostonimi"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tulostin %s\n"
-"Mit盲 haluat muokata t盲st盲 tulostimesta?"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Valitse portti, johon tulostimesi on kytketty."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Muokkaa tulostimen asetuksia"
+msgid "Change Cd-Rom"
+msgstr "Vaihda CD-levy盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Lis盲盲 uusi tulostin"
+msgid "Paraguay"
+msgstr "Paraguay"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "K盲yt盲 kasvavia varmuuskopioita (盲l盲 korvaa vanhoja varmuuskopioita)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Ei tunnettua ajuria 盲盲nikortillesi (%s)"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Normal Mode"
-msgstr "Perustila"
+msgid "force"
+msgstr "pakota"
-# Asennuksen sivuvalikko
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Muuta tulostusj盲rjestelm盲"
+msgid "Exit"
+msgstr "Poistu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS asetus"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
+"HUOM: Tulostinmallista ja tulostusj盲rjestelm盲st盲 riippuen asennetaan jopa %d "
+"Mt tarvittavia lis盲ohjelmia"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"P盲ivit盲 tulostinlistaa (n盲yt盲 kaikki saatavilla olevat CUPS-et盲tulostimet)"
+"Sinulla ei ole ainoatakaan asetettua liitynt盲盲.\n"
+"Aseta ne ensin klikkaamalla 'Aseta'"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "N盲yt盲 kaikki saatavilla olevat CUPS-et盲tulostimet"
+msgid "Estonian"
+msgstr "Eesti"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"Seuraavat tulostimet ovat asetettuja. Tuplaklikkaa tulostinta muuttaaksesi "
-"sen asetuksia; asettaaksesi sen oletustulostimeksi; n盲hd盲ksesi tulostimen "
-"tiedot;"
+"Apache on WWW-palvelin. Palvelinta k盲ytet盲盲n jakamaan HTML-\n"
+"tiedostoja ja ajamaan CGI-ohjelmia."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printing system: "
-msgstr "Tulostusj盲rjestelm盲: "
+msgid "Add/Del Clients"
+msgstr "Lis盲盲/Poista asiakkaita"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Checking installed software..."
-msgstr "Tarkistan asennetut ohjelmistot..."
+msgid "Choose the network interface"
+msgstr "Valitse verkkoliit盲nt盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Asennan Foomatic..."
+msgid "Unknown Model"
+msgstr "Tuntematon malli"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Tulostimen \"%s\" asetus ep盲onnistui!"
+msgid "CD/DVD burners"
+msgstr "CD/DVD polttoasemat"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Osiolta k盲ynnistet盲盲n oletuksena\n"
+" (MS-DOS k盲ynnistys, ei LILO)\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Luetaan tulostimen tietoja ..."
+msgid "choose image"
+msgstr "valitse kuva"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Mit盲 tulostusj盲rjestelm盲盲 (jonoa) haluat k盲ytt盲盲?"
+msgid "Firewalling configuration detected!"
+msgstr "Palomuurin asetukset l枚ydetty!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Valitse tulostusjono"
+msgid "Connection name"
+msgstr "Yhteyden nimi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Asetetaan oletustulostinta..."
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"tekstiruudun x-koordinaatti\n"
+"m盲盲r盲 merkeiss盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Asennetaan %s ..."
+msgid "Updating package selection"
+msgstr "P盲ivit盲n pakettien valintaa"
-#: ../../printer/printerdrake.pm:1
+# mat
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Poistetaan %s ..."
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Minne haluat liitt盲盲 loopback-tiedoston %s?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"Tulostusj盲rjestelm盲盲 (%s) ei k盲ynnistet盲 automaattisesti kun kone "
-"k盲ynnistet盲盲n.\n"
-"\n"
-"On mahdollista ett盲 automaattik盲ynnistys on poistettu k盲yt枚st盲 "
-"turvallisuustason nostamisen takia, koska tulostusj盲rjestelm盲 on mahdollinen "
-"hy枚kk盲yskohta.\n"
-"\n"
-"Haluatko ottaa uudestaan k盲ytt枚枚n tulostusj盲rjestelm盲n "
-"automaattik盲ynnistyksen?"
+"Levykkeen luominen onnistui.\n"
+"Voit nyt toistaa asennuksesi."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "K盲ynnist盲盲 tulostusj盲rjestelm盲n k盲ynnistyksen aikana"
+msgid "the number of buttons the mouse has"
+msgstr "hiiren painikkeiden m盲盲r盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"Olet asentamassa tulostusj盲rjestelm盲盲 %s j盲rjestelm盲盲n, joka k盲ytt盲盲 "
-"turvallisuustasoa %s.\n"
-"\n"
-"T盲m盲 tulostusj盲rjestelm盲 suorittaa demonin (taustaprosessina), joka odottaa "
-"tulostust枚it盲 ja k盲sittelee niit盲. T盲m盲 demoni on my枚s k盲ytett盲viss盲 "
-"et盲koneilta verkon kautta, ja sen vuoksi se on mahdollinen hy枚kk盲yskohde. "
-"T盲st盲 syyst盲 ainoastaan harvat valitut demonit k盲ynnistet盲盲n oletuksena "
-"t盲ll盲 turvallisuustasolla.\n"
-"\n"
-"Haluatko varmasti asettaa tulostusta t盲ss盲 koneessa?"
+"Ole hyv盲 ja sy枚t盲 hakemisto (tai moduuli) johon\n"
+"haluat tallentaa varmistukset t盲ss盲 koneessa."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Asennan tulostusj盲rjestelm盲n turvatasolla %s"
+msgid "Replay"
+msgstr "Toista"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "paranoid"
-msgstr "vainoharhainen"
+msgid "Backup other files"
+msgstr "Varmuuskopioi muut tiedostot"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "high"
-msgstr "korkea"
+msgid "No floppy drive available"
+msgstr "Ei levykeasemaa k盲ytett盲viss盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "K盲ynnist盲n tulostusj盲rjestelm盲盲 uudelleen..."
+msgid "Backup files are corrupted"
+msgstr "Varmuuskopiot ovat vahingoittuneet"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Et盲tulostimen asetukset"
+msgid "TV norm:"
+msgstr "TV-normi :"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Verkkoyhteys ei ollut k盲ynniss盲, eik盲 sit盲 voitu k盲ynnist盲盲. Ole hyv盲 ja "
-"tarkista laitteistosi ja asetuksesi. Sen j盲lkeen voit yritt盲盲 asettaa "
-"et盲tulostinta uudelleen."
+msgid "Cpuid family"
+msgstr "Cpuid-perhe"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Verkkoasetusta, joka tehtiin asennuksen aikana, ei voida k盲ynnist盲盲 nyt. Ole "
-"hyv盲 ja tarkista onko verkko k盲ytett盲viss盲 kun olet k盲ynnist盲nyt "
-"j盲rjestelm盲si uudelleen ja korjannut asetukset Mandraken Ohjauskeskuksessa, "
-"osassa \"Verkko & Internet\"/\"Yhteys\", ja aseta sen j盲lkeen tulostin, my枚s "
-"Mandraken Ohjauskeskuksessa, osassa \"Laitteisto\"/\"Tulostin\"."
+msgid "32 MB"
+msgstr "32 Mt"
-# Asennuksen sivuvalikko
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Aseta verkkoyhteys nyt"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Liettua AZERTY (uusi)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Jatka asettamatta verkkoyhteytt盲"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "kyll盲 tarkoittaa ett盲 laskentaprosessorista l枚ytyy poikkeusvektori"
-#: ../../printer/printerdrake.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"Olet asettamassa et盲tulostinta. T盲m盲 vaatii toimivan verkkoyhteyden, mutta "
-"verkkosi ei ole viel盲 m盲盲ritetty. Mik盲li jatkat ilman verkkoasetusta, et voi "
-"k盲ytt盲盲 tulostinta jota olet nyt asettamassa. Miten haluat jatkaa?"
+"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
+"Mik盲盲n k盲ynnistyslataaja ei osaa k盲sitell盲 t盲t盲 ilman /boot -osiota.\n"
+"Lis盲盲 /boot -osio, jos haluat k盲ytt盲盲 LILO:a tai GRUB:a"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "Verkkotoimintoja ei ole asetettu"
+msgid "Previous"
+msgstr "Edellinen"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Starting network..."
-msgstr "K盲ynnist盲n verkkoa..."
+msgid "Other OS (MacOS...)"
+msgstr "Muu k盲ytt枚j盲rjestelm盲 (MacOS...)"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "P盲ivitet盲盲n tulostintietoja..."
+msgid "To activate the mouse,"
+msgstr "Aktivoidaksesi hiiren,"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Olet siirt盲nyt edellisen oletustulostimesi (\"%s\"). Asetetaanko se "
-"oletustulostimeksi my枚s uudessa %s tulostusj盲rjestelm盲ss盲?"
+msgid "Bringing up the network"
+msgstr "K盲ynnist盲n verkkoa"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Siirr盲 tulostimen asetukset"
+msgid "Screenshots will be available after install in %s"
+msgstr "Kuvakaappaukset l枚ytyv盲t asennuksen j盲lkeen hakemistosta %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Siirr盲n %s..."
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Useampi kuin yksi Microsoft-osio on l枚ydetty kovalevylt盲si. Ole hyv盲\n"
+"ja valitse osio jota haluat pienent盲盲 jotta pystyisit asentamaan uuden\n"
+"Mandrake Linux -k盲ytt枚j盲rjestelm盲si.\n"
+"\n"
+"Jokainen osio on lueteltu seuraavasti: \"Linux nimi\", Windows nimi\", \"Koko"
+"\".\n"
+"\n"
+"\"Linux nimi\" rakenne on seuraava: \"kovalevytyyppi\". \"kovalevynumero"
+"\", \n"
+"\"osionumero\" (esim. \"hda1\").\n"
+"\n"
+"\"kovalevytyyppi\" on \"hd\" jos kovalevysi on IDE-kovalevy ja \"sd\" jos\n"
+"se on SCSI-kovalevy.\n"
+"\n"
+"\"kovalevynumero\" on aina aakkonen \"hd\":n tai \"sd\":n per盲ss盲.\n"
+"IDE-kovalevyille: \n"
+"\n"
+" * \"a\" tarkoittaa \"is盲nt盲levy ensisijaisella IDE ohjaimella\";\n"
+"\n"
+" * \"b\" tarkoittaa \"orjalevy ensisijaisella IDE ohjaimella\";\n"
+"\n"
+" * \"c\" tarkoittaa \"is盲nt盲levy toissijaisella IDE ohjaimella\";\n"
+"\n"
+" * \"d\" tarkoittaa \"orjalevy toissijaisella IDE ohjaimella\";\n"
+"\n"
+"SCSI kovalevyill盲 \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" tarkoittaa\n"
+"\"toiseksi pienin SCSI ID\", jne.\n"
+"\n"
+"\"Windows nimi\" on Windowsissa n盲kyv盲 osiota vastaava aakkonen.\n"
+"(ensimm盲inen osio on \"C:\", seuraava \"D:\" jne.)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "New printer name"
-msgstr "Uuden tulostimen nimi"
+msgid "Tanzania"
+msgstr "Tansania"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "Lasken FAT-tiedostoj盲rjestelm盲n rajoja"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"\n"
+"Backup Sources: \n"
msgstr ""
-"Tulostin \"%s\" on jo olemassa,\n"
-"haluatko todellakin korvata olemassa olevat asetukset?"
+"\n"
+"Varmuuskopion l盲hteet: \n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tulostimen nimi saa sis盲lt盲盲 vain kirjaimia, numeroita ja alaviivan"
+msgid "Content of the file"
+msgstr "Tiedoston sis盲lt枚"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Siirr盲"
+msgid "Authentication LDAP"
+msgstr "Tunnistus: LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tulostin nimell盲 \"%s\" on jo olemassa kohdassa %s.\n"
-"Paina \"Siirr盲\" ylikirjoittaaksesi sen.\n"
-"Voit my枚s kirjoittaa uuden nimen tai ohittaa t盲m盲n tulostimen."
+msgid "Let me pick any driver"
+msgstr "Anna minun valita mik盲 ajuri tahansa"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "脛l盲 siirr盲 tulostimia"
+msgid "Profile "
+msgstr "Profiili: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Merkitse tulostimet jotka haluat siirt盲盲 ja paina \n"
-"\"Siirr盲\"."
+msgid "transmitted"
+msgstr "l盲hetetty"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"My枚sk盲盲n tulostimia, jotka ovat asetettuja valmistajien tuottamilla PPD-"
-"tiedostoilla tai natiivi CUPS-ajureilla, ei voida siirt盲盲."
+msgid "Palestine"
+msgstr "Palestiina"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Lis盲ksi jonoja, joita ei ole luotu t盲ll盲 ohjelmalla tai \"foomatic-configure"
-"\" komennolla, ei voida siirt盲盲."
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ja LPRng eiv盲t tue IPP-tulostimia.\n"
+msgid "%d comma separated strings"
+msgstr "%d pilkulla erotettuja merkkijonoja"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ tukee vain paikallisia tulostimia, LPD et盲tulostimia, ja Socket/TCP "
-"tulostimia.\n"
+msgid "Here is the full list of keyboards available"
+msgstr "T盲ss盲 on koko lista tarjolla olevista n盲pp盲imist枚ist盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ei tue tulostimia, jotka ovat Novell-palvelimissa, tai jotka l盲hett盲v盲t "
-"dataa vapaamuotoiseen komentoon.\n"
+msgid "Theme name"
+msgstr "Teeman nimi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Voit kopioida tulostinasetukset jotka olet tehnyt %s jonolle nykyiseen %s "
-"jonoon. Kaikki asetustiedot (tulostimen nimi, kuvaus, sijainti, yhteystyyppi "
-"sek盲 vakioasetukset) kopioidaan, mutta tulostust枚it盲 ei siirret盲.\n"
-"Kaikkia tulostusjonoja ei voida siirt盲盲 seuraavista syist盲:\n"
+msgid "/_Help"
+msgstr "/O_hje"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Tulostimesi asetettiin automaattisesti sallimaan kuva-kortti-aseman k盲ytt枚 "
-"tietokoneeltasi. Voit nyt k盲ytt盲盲 kuvakorttisi graafisella ohjelmalla "
-"\"MtoolsFM\" (Valikko: \"Sovellukset\" -> \"Tiedostoty枚kalut\" -> \"Mtools "
-"tiedostonhallinta\") tai komentorivity枚kaluilla \"mtools\" ( \"man mtools\" "
-"komentorivill盲 antaa lis盲盲 tietoa). L枚yd盲t kortin tiedostoj盲rjestelm盲n "
-"asematunnuksen \"p:\" alta tai sen j盲lkeisten asematunnusten alta mik盲li "
-"sinulla on enemm盲n kuin yksi HP tulostin, jossa on kuva-kortti asema. Jos "
-"k盲yt盲t \"MtoolsFM\":a voit vaihtaa eri asematunnusten v盲lill盲 "
-"tiedostolistauksen oikean yl盲kulman kent盲ss盲."
+"T盲盲ll盲 voit m盲盲ritt盲盲 mik盲li t盲h盲n koneeseen liitetyt kuvanlukijat pit盲isi "
+"olla k盲ytett盲viss盲 et盲koneissa sek盲 mitk盲 et盲koneet sallitaan."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Monitoimilaitteesi asetettiin automaattisesti osaamaan skannausta. Nyt voit "
-"skannata komennolla \"scanimage\" (\"scanimage -d hp:%s\" m盲盲ritt盲盲ksesi "
-"skanneri jos sinulla on enemm盲n kuin yksi) komentorivill盲 tai graafisella "
-"k盲ytt枚liittym盲ll盲: \"xscanimage\" tai \"xsane\". Jos k盲yt盲t GIMP:盲 voit my枚s "
-"skannata valitsemalla sopivan pisteen \"Tiedosto\"/\"Nouda\" valikosta. Voit "
-"my枚s kutsua \"man scanimage\" komentorivill盲 saadaksesi lis盲盲 tietoa.\n"
-"\n"
-"脛l盲 k盲yt盲 \"scannerdrake\":a t盲lle laitteelle!"
+msgid "the width of the progress bar"
+msgstr "edistymispalkin leveys"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Tulostan testisivu(ja)..."
+msgid "Cook Islands"
+msgstr "Cookinsaaret"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Tulostusparametrien lista"
+msgid "Formatting partition %s"
+msgstr "Alustan osiota %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tulostus k盲ynniss盲 tulostimella \"%s\""
+msgid "Hostname required"
+msgstr "Koneen nimi vaaditaan"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Tulostus/Kuva-Kortin k盲ytt枚 laitteella \"%s\""
+msgid "Unselect fonts installed"
+msgstr "Poista asennettujen kirjasimien valinta"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tulostus/Skannaus laitteella \"%s\""
+msgid "Cancel"
+msgstr "Peruuta"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tulostus/Skannaus/Kuva-Kortit laitteella \"%s\""
+msgid "Searching for configured scanners ..."
+msgstr "Etsit盲盲n asetetut kuvanlukijat ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Saadaksesi tietoja nykyisen tulostimen olemassa olevista optioista, lue joko "
-"alla n盲ytetty lista tai paina \"Tulostusparametrien lista\" painiketta.%s%s%"
-"s\n"
-"\n"
+msgid "Wheel"
+msgstr "Rulla"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komennot \"%s\" ja \"%s\" sallivat my枚s mahdollisuuden muokata asetukset "
-"erityiselle tulostusty枚lle. Voit yksinkertaisesti lis盲t盲 halutut asetukset "
-"komentoriville, esim.: \"%s <tiedosto>\". \n"
+msgid "Videocard"
+msgstr "N盲yt枚nohjain"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Voit k盲ytt盲盲 my枚s graafista k盲ytt枚liittym盲盲 \"xpdq\" optioiden asettamiseen "
-"ja tulostust枚iden hallintaan.\n"
-"\n"
-"Jos k盲yt盲t KDE ty枚p枚yt盲ymp盲rist枚盲 sinulla on \"paniikipainike\" kuvake "
-"ty枚p枚yd盲ll盲 \"PYS脛YT脛 tulostus!\", joka pys盲ytt盲盲 kaikki tulostusty枚t heti "
-"kun painat sit盲. T盲m盲 on hy枚dyllist盲 esimerkiksi kun paperi on tukossa.\n"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tVarmuuskopiot k盲ytt盲v盲t: tar ja bzip2\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"T盲t盲 komentoa voit my枚s k盲ytt盲盲 monien ohjelmien tulostusdialogien "
-"\"Tulostuskomento\" kent盲ss盲, mutta t盲ss盲 sinun ei pid盲 m盲盲ritt盲盲 tiedoston "
-"nime盲 koska ohjelma m盲盲ritt盲盲 sen itse.\n"
+msgid "Remove Selected"
+msgstr "Poista valitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentorivilt盲 (p盲盲teikkunasta) k盲yt盲 komentoa \"%s "
-"<tiedosto>\" tai \"%s <tiedosto>\".\n"
+msgid "/Autodetect _modems"
+msgstr "/_Modeemien automaattitunnistus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Saadaksesi listan nykyisen tulostimen parametreista klikkaa \"Tulostuksen "
-"valintalista\"-painiketta."
+msgid "Remove printer"
+msgstr "Poista tulostin"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
+"WARNING!\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
+"VAROITUS!\n"
"\n"
-"\"%s\" komento tarjoaa my枚s mahdollisuuden muokata asetukset erityiselle "
-"tulostusty枚lle. Voit yksinkertaisesti lis盲t盲 halutut asetukset "
-"komentoriville, esim.: \"%s <tiedosto>\". "
+"DrakX aikoo nyt muuttaa Windows-osiosi kokoa. Ole varovainen:\n"
+"t盲m盲 toimenpide on vaarallinen. Jos et ole viel盲 tarkistanut \n"
+"Windows-osioitasi, sinun tulisi poistua asennuksesta, ajaa\n"
+"kiintolevyjen tarkistus Windowsissa (sek盲 mahdollisesti my枚s\n"
+"eheytt盲盲 levyt). Sen j盲lkeen voit aloittaa asennuksen uudelleen.\n"
+"Samalla suosittelen ottamaan varmuuskopiot t盲rkeist盲 tiedoista.\n"
+"Kun olet varma, paina OK."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentorivilt盲 (p盲盲teikkunasta) k盲yt盲 komentoa \"%s "
-"<tiedosto>\".\n"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Mitk盲 palvelut haluat olevan k盲ytett盲viss盲 Internetist盲?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Welcome to the mail configuration utility.\n"
"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
-"T盲ss盲 on lista nykyisen tulostinen k盲yt枚ss盲 olevista tulostusvalinnoista:\n"
+"Tervetuloa s盲hk枚postin asetusty枚kaluun.\n"
"\n"
+"T盲盲lt盲 voit asettaa h盲lytysj盲rjestelm盲n.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"N盲it盲 komentoja voit my枚s k盲ytt盲盲 monien ohjelmien tulostusdialogien "
-"\"Tulostuskomento\" kent盲ss盲, mutta t盲ss盲 sinun ei pid盲 m盲盲ritt盲盲 tiedoston "
-"nime盲 koska ohjelma m盲盲ritt盲盲 sen itse.\n"
+msgid "Other"
+msgstr "Muut"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentorivilt盲 (p盲盲te-ikkunasta) voit k盲ytt盲盲 joko "
-"komentoa: \"%s <tiedosto>\" tai graafinen tulostusty枚kalu: \"xpp tiedosto\" "
-"tai \"kprinter <tiedosto>\". Graafiset ty枚kalut sallivat sinun valita "
-"tulostimen ja muuttaa sen asetuksia helposti.\n"
+msgid "Default"
+msgstr "Oletus"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "Toimiiko tulostus kunnolla?"
+msgid "Button 2 Emulation"
+msgstr "2. n盲pp盲imen emulaatio"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testisivu(t) on l盲hetetty tulostimelle.\n"
-"Voi kest盲盲 hetken ennen kuin tulostus alkaa.\n"
+msgid "type1inst building"
+msgstr "rakennetaan: type1inst"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testisivu(t) on l盲hetetty tulostimelle.\n"
-"Voi kest盲盲 hetken ennen kuin tulostus alkaa.\n"
-"Tulostuksen tila:\n"
-"%s\n"
-"\n"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Do not print any test page"
-msgstr "脛l盲 tulosta testisivua"
+msgid "choose image file"
+msgstr "valitse kuvatiedosto"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Valokuva testisivu"
+msgid "X server"
+msgstr "X-palvelin"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Vaihtoehtoinen testisivu (A4)"
+msgid "Domain Admin User Name"
+msgstr "Verkkoalueen p盲盲k盲ytt盲j盲n nimi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Vaihtoehtoinen testisivu (Letter)"
+msgid "There was an error while scanning for TV channels"
+msgstr "Tapahtui virhe TV-kanavien haun aikana"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Vakio testisivu"
+msgid "US keyboard (international)"
+msgstr "US n盲pp盲imist枚 (kansainv盲linen)"
-#: ../../printer/printerdrake.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Print"
-msgstr "Tulosta"
+msgid "Not installed"
+msgstr "Ei asennettu"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Ei testisivuja"
+msgid "LAN connection"
+msgstr "L盲hiverkko"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Valitse testisivut jotka haluat tulostaa.\n"
-"Huomautus: valokuva testisivun tulostus voi kest盲盲 aika kauan ja "
-"lasertulostimissa, joissa on liian v盲h盲n muistia, tulostus voi ep盲onnistua. "
-"Yleens盲 vakiotestisivun tulostus riitt盲盲."
+msgid "/File/-"
+msgstr "/Tiedosto/-"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Test pages"
-msgstr "Testisivut"
+msgid "Italian"
+msgstr "Italia"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
+#, c-format
+msgid "Basic"
+msgstr "Perusasetukset"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-"Haluatko asettaa t盲m盲n tulostimen (\"%s\")\n"
-"oletustulostimeksi?"
+"\n"
+" Copyright (C)2002 MandrakeSoft.\n"
+"\tStew Benedict <sbenedict\\@mandrakesoft.com>\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "Valitsin %s on arvoalueensa ulkopuolella!"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valitsimen %s pit盲盲 olla luku!"
+msgid "pdq"
+msgstr "pdq"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valitsimen %s pit盲盲 olla kokonaisluku!"
+msgid "Card IO"
+msgstr "Kortin IO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Tulostimen oletusasetuksia"
+msgid "when checked, owner and group won't be changed"
+msgstr "kun valittu, omistajaa ja ryhm盲盲 ei muuteta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-"Tulostimen vakioasetukset\n"
"\n"
-"Sinun kannattaisi varmistaa ett盲 paperiasetukset ja mustetyyppi/tulostustila "
-"(jos s盲盲dett盲viss盲) ja my枚s lasertulostimien laitteistoasetukset (muisti, "
-"kaksipuolinen tulostus, lis盲sy枚tt枚lokerot) ovat oikein m盲盲ritetty. Huomaa "
-"ett盲 korkean tulostuslaadun/resoluution k盲ytt枚 voi hidastaa tulostusnopeutta."
+"T盲m盲 erityinen Bootsrap-\n"
+"osio on j盲rjestelm盲si\n"
+"kaksoisk盲ynnist盲miseksi.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Firmwaren lataus HP LaserJet 1000 tulostimelle"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Valitse jokaiselle vaiheelle toistetaanko asennus samalla tapaa kuin nyt vai "
+"onko kyseinen vaihe manuaalinen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-"Voidaksesi tulostaa Lexmark Inkjet tulostimellasi n盲ill盲 asetuksilla, "
-"tarvitset Lexmark:in tuottamat ajurit (http://www.lexmark.com/). Paina "
-"\"Drivers\" linkki. Valitse sen j盲lkeen tulostinmallisi ja \"Linux\" "
-"k盲ytt枚j盲rjestelm盲. Ajurit tulevat RPM-pakettina tai komentoskriptein盲 "
-"interaktiivisella graafisella asennuksella. Sinun ei tarvitse asettaa "
-"tulostinta graafisella k盲ytt枚liittym盲ll盲. Peruuta heti lisenssisopimuksen "
-"j盲lkeen. Sitten voit tulostaa tulostinp盲iden kohdistussivut \"lexmarkmaintain"
-"\" ohjelmalla ja s盲盲t盲盲 kohdistusasetukset kohdalleen."
+"Voit my枚s m盲盲ritt盲盲 t盲盲ll盲 pit盲isik枚 et盲koneiden kuvanlukijat "
+"automaattisesti olla k盲ytett盲viss盲 t盲ss盲 koneessa."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjetin asettaminen"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Verkkoon k盲ytt盲en FTP.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark:in tuottamat inkjet tulostimien ajurit tukevat ainoastaan "
-"paikallisia tulostimia, mutta ei lainkaan et盲koneiden tai "
-"tulostinpalvelimien tulostimia. Liit盲 tulostin paikalliseen porttiin tai "
-"aseta se koneessa johon se on liitetty."
+msgid "Russian (Yawerty)"
+msgstr "Ven盲j盲 (Yawerty)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Olet asettamassa OKI laser wintulostinta. N盲m盲 tulostimet k盲ytt盲v盲t hyvin "
-"erikoista kommunikointiprotokollaa ja sen takia ne toimivat ainoastaan "
-"liitettyn盲 ensimm盲iseen rinnakkaisporttiin. Jos tulostimesi on liitetty "
-"toiseen porttiin tai tulostuspalvelimeen sinun t盲ytyy liitt盲盲 tulostin "
-"ensimm盲iseen rinnakkaisporttiin ennen kuin tulostat testisivun. Muussa "
-"tapauksiissa tulostin ei toimi. Ajuri ei v盲lit盲 asettamastasi yhteystavasta."
+msgid "You must enter a device or file name!"
+msgstr "Sinun t盲ytyy sy枚tt盲盲 laitteen tai tiedoston nimi!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI wintulostimen asettaminen"
+msgid "/_Quit"
+msgstr "/_Lopeta"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"Jos tulostimesi ei ole listattu, valitse yhteensopiva (katso tulostimen "
-"ohjekirjasta) tai vastaava."
+"Tarvitset alcatel:in mikrokoodin.\n"
+"Voit hakea sen osoitteesta: \n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"ja kopioi tiedosto 'mgmt.o' hakemistoon '/usr/share/speedtouch'"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphics memory: %s kB\n"
+msgstr "Grafiikkamuisti: %s kt\n"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
+"T盲m盲 ohjelma on ilmainen; voit levitt盲盲 ja/tai muokata sit盲 Free\n"
+"Software Foundationin julkaiseman 'GNU General Public License'\n"
+"-lisenssin mukaisesti; joko lisenssin version 2 mukaisesti, tai\n"
+"(niin halutessasi) mink盲 tahansa uudemman version mukaisesti.\n"
"\n"
+"T盲m盲 ohjelma on julkaistu siin盲 toivossa, ett盲 se osoittautuisi\n"
+"hy枚dylliseksi, mutta ILMAN MINK脛脛NLAISTA TAKUUTA; ilman edes\n"
+"oletettua takuuta TUOTTEEN TOIMIVUUDESTA tai SOPIVUUDESTA \n"
+"TIETTYYN TEHT脛V脛脛N. Lis盲tietoja saat tutustumalla 'GNU General \n"
+"Public License' dokumentaatioon.\n"
"\n"
-"Tarkista jos Printerdrake on tunnistanut tulostimesi mallin oikein. Etsi "
-"oikea malli kun kohdistin on v盲盲r盲ss盲 mallissa tai \"Raakatulostin\" "
-"valinnassa."
+"Hakemasi ohjelman mukana kuuluu tulla kopio 'GNU General Public License'\n"
+"dokumentaatiosta; jos n盲in ei ole, kirjoita Free Software Foundation,\n"
+"Inc.:lle osoitteeseen 59 Temple Place - Suite 330, Boston, MA 02111-1307\n"
+", USA.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Mik盲 tulostinmalli sinulla on?"
+msgid "access to compilation tools"
+msgstr "oikeudet ohjelmointity枚kaluihin"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer model selection"
-msgstr "Tulostimen mallin valinta"
+msgid "Please select data to restore..."
+msgstr "Valitse palautettava tieto..."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Luetaan tulostintietokantaa..."
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Jos aiot k盲ytt盲盲 aboot:a, varmista ett盲 j盲t盲t vapaata tilaa levyn alkuun\n"
+"(2048 sektoria on tarpeeksi)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "Valitse malli manuaalisesti"
+msgid "Standard test page"
+msgstr "Vakio testisivu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The model is correct"
-msgstr "Malli on oikea"
+msgid "Create"
+msgstr "Luo"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake on verrannut tulostimen automaattitunnistuksesta saatuja "
-"tietoja tulostintietokannassa oleviin tietoihin l枚yt盲盲kseen sopivimman "
-"mallin. Valinta voi olla v盲盲r盲, varsinkin jos tulostimesi ei l枚ydy "
-"tietokannasta. Varmista ett盲 valinta on oikea, ja paina \"Malli on oikea\", "
-"tai jos valinta on v盲盲r盲 paina \"Valitse malli manuaalisesti\", jolloin voit "
-"valita tulostinmallisi itse seuraavassa ruudussa.\n"
-"\n"
-"Tulostimellesi Printerdrake on l枚yt盲nyt:\n"
-"\n"
-"%s"
+msgid "What"
+msgstr "Mit盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Your printer model"
-msgstr "Tulostimesi malli "
+msgid "There was an error ordering packages:"
+msgstr "Tapahtui virhe j盲rjestett盲ess盲 paketteja:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Valmistellaan tulostintietokantaa..."
+msgid "Bulgarian (BDS)"
+msgstr "Bulgaria (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Location"
-msgstr "Sijainti"
+msgid "Disable Server"
+msgstr "Poista palvelin k盲yt枚st盲"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "Kuvaus"
+msgid "Filesystem encryption key"
+msgstr "Tiedostoj盲rjestelm盲n salausavain"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name of printer"
-msgstr "Tulostimen nimi"
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-"Jokainen tulostin tarvitsee nimen (esim. \"tulostin\"). Kentti盲 Kuvaus ja "
-"Sijainti ei tarvitse t盲ytt盲盲. Ne ovat kommentteja k盲ytt盲jille."
+"Valitse ensimm盲inen numero 10-alueella, jota haluat muokata,\n"
+"tai paina vain Enter jatkaaksesi.\n"
+"Valintasi? "
-#: ../../printer/printerdrake.pm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Kirjoita tulostimen nimi ja kuvaus"
+msgid "Save theme"
+msgstr "Tallenna teema"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Asetan tulostusporttia CUPS:in k盲ytt枚枚n..."
+msgid "group"
+msgstr "ty枚ryhm盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Tarkistan laite ja asetan HPOJ..."
+msgid "Brazil"
+msgstr "Brasilia"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Kuva-muistikortin k盲ytt枚 HP monitoimilaitteissasi"
+msgid "Auto Install"
+msgstr "Automaattinen asennus"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Tunnistetaan HP monitoimilaitettasi"
+msgid "Network Configuration Wizard"
+msgstr "Verkkoasetusten velho"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Asennan mtools paketteja..."
+msgid "Removable media automounting"
+msgstr "Vaihdettavan median automaattinen liitt盲minen"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Asennan SANE paketteja..."
+msgid "Printing"
+msgstr "Tulostus"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Asennan HPOJ paketteja..."
+msgid "Unkown driver"
+msgstr "Tuntematon ajuri"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"There are no printers found which are directly connected to your machine"
msgstr ""
-"Onko tulostimesi HP tai Sony monitoimilaite (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 kuvanlukijalla, Sony IJP-V100), HP PhotoSmart tai "
-"HP LaserJet 2200?"
+"Yht盲k盲盲n tulostinta ei l枚ydetty, joka on kytketty suoraan tietokoneeseesi"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Komentorivi pit盲盲 sy枚tt盲盲!"
+msgid "Create a new partition"
+msgstr "Luo uusi osio"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Command line"
-msgstr "Komentorivi"
+msgid "Driver:"
+msgstr "Ajuri:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"T盲盲ll盲 voit m盲盲ritt盲盲 haluamasi komentorivin johon tulostusty枚 putkitetaan "
-"suoraan tulostimelle l盲hett盲misen sijasta"
+msgid "unknown"
+msgstr "tuntematon"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Putkita ty枚 komennolle"
+msgid "Use fdisk"
+msgstr "K盲yt盲 fdiski盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Tunnistettu malli: %s %s"
+msgid "MOVE YOUR WHEEL!"
+msgstr "PY脰RIT脛 HIIREN RULLAA!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Sinun pit盲盲 sy枚tt盲盲 oikeanmuotoinen URI!"
+msgid "sent: "
+msgstr "l盲hetetty: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Tulostinlaitteen osoite (URI)"
+msgid "Automatic IP"
+msgstr "Automaattinen IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-"Voit m盲盲ritt盲盲 URI:n suoraan k盲ytt盲盲ksesi tulostinta. URI:n pit盲盲 t盲ytt盲盲 "
-"joko CUPS tai Foomaatic m盲盲ritykset. Huomioi ettei kaikki URI tyypit ole "
-"tuettuja kaikissa tulostusjonoissa."
+"Ole hyv盲. Asennus on valmis ja GNU/Linux -j盲rjestelm盲si on valmis\n"
+"k盲ytett盲v盲ksi. Paina \"%s\" k盲ynnist盲盲ksesi j盲rjestelm盲n\n"
+"uudelleen. Ensimm盲inen asia mit盲 n盲et sen j盲lkeen kun tietokoneesi\n"
+"on suorittanut laitteistotestit, on k盲ynnistysvalikko josta voit valita "
+"mink盲\n"
+"k盲ytt枚j盲rjestelm盲n haluat k盲ynnist盲盲.\n"
+"\n"
+"\"%s\" painike n盲ytt盲盲 kaksi lis盲painiketta:\n"
+"\n"
+" * \"%s\": luodaksesi levykkeen, joka suorittaa\n"
+"koko asennuksen ilman k盲ytt盲j盲n ohjausta, samoilla asetuksilla ja\n"
+"valinnoilla kuin nykyinen asennus.\n"
+"\n"
+" Huomaa, ett盲 t盲m盲 valinta n盲ytt盲盲 kaksi vaihtoehtoa sinulle:\n"
+"\n"
+" * \"%s\": T盲m盲 on osittain automaattinen asennus, voit p盲盲tt盲盲\n"
+"ainoastaan levyn osioinnista;\n"
+"\n"
+" * \"%s\": T盲ysautomaattinen asennus: koko kovalevy\n"
+"kirjoitetaan uudestaan ja kaikki vanhat tiedot poistetaan.\n"
+"\n"
+" T盲m盲 toiminto helpottaa ty枚t盲, kun asennus on teht盲v盲 monille\n"
+"samanlaisille koneille. Katso meid盲n webbisivustoa, aiheella\n"
+"automaattiasennus (Auto Install);\n"
+"\n"
+" * \"%s\"(*): tallentaa listan valituista paketeista\n"
+"levykkeelle. Sitten kun teet toisen asennuksen, aseta levyke asemaan,\n"
+"siirry apusivulle painamalla [F1] painiketta, ja kirjoita komentoriville\n"
+" linux defcfg=\"floppy\" ja paina 'enter'.\n"
+"\n"
+"(*) Tarvitset FAT-formatoidun levykkeen (luodaksesi levykkeen\n"
+"Linuxissa kirjoita \"mformat a:\")"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Port"
-msgstr "Portti"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer host name or IP"
-msgstr "Tulostinlaitteen verkkonimi tai osoite"
+msgid "Configuration of a remote printer"
+msgstr "Et盲tulostimen asetukset"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Portin numeron pit盲isi olla kokonaisluku!"
+msgid "Moldova"
+msgstr "Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Tulostinlaitteen verkkonimi tai osoite puuttuu!"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Valitse, jos haluat tyhjent盲盲 nauhan ennen kopiointia"
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Online-alusta, joka vastaa yrityskohtaiseen tukitarpeeseen"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Web-osoitteen tulee alkaa etuliitteell盲 'ftp:' tai 'http:'"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Add a new rule at the end"
+msgstr "Lis盲盲 uusi s盲盲nt枚 viimeiseksi"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-"Tulostaaksesi TCP tai Socket tulostimeen, sinun t盲ytyy antaa tulostimen "
-"verkkonimi tai IP-numero ja tarvittaessa porttinumero (oletus: 9100). HP:n "
-"JetDirect tulostuspalvelimien portti on yleens盲 9100, muissa palvelimissa "
-"voi olla eri portti. Katso laitteistosi k盲sikirjaa."
+"Voit my枚s m盲盲ritt盲盲 t盲盲ll盲 tulisiko et盲koneiden tulostimien olla "
+"automaattisesti k盲ytett盲viss盲 t盲ss盲 koneessa."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-"Valitse yksi automaattitunnistetuista tulostimista listalta, tai sy枚t盲 "
-"verkkonimi tai IP-numero ja tarvittaessa porttinumero (oletus: 9100) "
-"sy枚tt枚kenttiin."
+"Voit antaa lis盲asetuksia moduulille %s.\n"
+"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
+"Esimerkiksi, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket -tulostimen parametrit"
+msgid "Quit without writing the partition table?"
+msgstr "Lopeta kirjoittamatta osiotaulua?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Kone \"%s\", portti %s"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", kone \"%s\", portti %s"
+msgid "Installing packages..."
+msgstr "Asennan paketteja..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "Tutkitaan verkkoa..."
+msgid "Dutch"
+msgstr "Hollanti"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "Tulostimen automaattinen tunnistus"
+msgid "The following packages need to be installed:\n"
+msgstr "Seuraavat paketit pit盲盲 asentaa:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-jonon nimi puuttuu!"
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-palvelimen nimi puuttuu!"
+msgid "service setting"
+msgstr "Palveluiden asettaminen"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Tulostusjonon nimi"
+msgid "Custom"
+msgstr "Mukautettu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Tulostuspalvelin"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Tiedosto on jo toisen loopback:n k盲yt枚ss盲, valitse toinen"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare-palvelimen tulostimelle tulostaaksesi sinun pit盲isi sy枚tt盲盲 NetWare-"
-"palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja "
-"mahdollisesti tulostusjonon nimi sille tulostimelle, jota haluat k盲ytt盲盲, "
-"sek盲 soveltuva k盲ytt盲j盲tunnus ja salasana."
+msgid "Read-only"
+msgstr "Vain luku"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare tulostusparametrit"
+msgid "Latvia"
+msgstr "Latvia"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Yhdist盲 tulostimesi Linux-palvelimeen ja salli Windows kone(et) yhdist盲盲 "
-"siihen asiakkaina.\n"
-"\n"
-"Haluatko varmasti jatkaa asettamalla tulostinta t盲ll盲 tavalla?"
+msgid "No known driver"
+msgstr "Ei tunnettua ajuria"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 Mt"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Aseta Windows-palvelimesi jakamaan tulostinta IPP protokollan kautta ja "
-"aseta tulostaminen t盲st盲 koneesta k盲ytt盲en \"%s\" yhteystapaa Printerdrake:"
-"ssa.\n"
-"\n"
+"Jos se ei ole sama jota haluat asettaa, sy枚t盲 laite- tai tiedostonimi "
+"sy枚teriville"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"You can visit our hardware database at:\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Olet asettamassa tulostamista Windows tiliin salasanan kanssa. Samban "
-"asiakasohjelmiston arkkitehtuurissa olevan virheen takia salasana sy枚tet盲盲n "
-"selkokielisen盲 komentoriviin, jolla Samba-asiakas l盲hett盲盲 tulostusty枚n "
-"Windows-palvelimelle. Joten t盲m盲n koneen jokaisella k盲ytt盲j盲ll盲 on "
-"mahdollisuus n盲hd盲 tuo salasana n盲yt枚ll盲 k盲ytt盲m盲ll盲 komentoa: \"ps auxwww"
-"\".\n"
+"Yht盲k盲盲n 盲盲nikorttia ei l枚ydetty koneestasi. Varmista, ett盲 Linux-tuettu "
+"盲盲nikortti on kytketty oikein.\n"
"\n"
-"Suosittelemme k盲ytt盲m盲盲n jotain seuraavista vaihtoehdoista (kaikissa "
-"vaihtoehdoissa sinun pit盲盲 varmistua siit盲 ett盲 ainoastaan paikallisverkon "
-"k盲ytt盲j盲t voivat k盲ytt盲盲 Windows-palvelintasi, esimerkiksi k盲ytt盲m盲ll盲 "
-"palomuuria):\n"
"\n"
-"K盲yt盲 salasanasuojatonta tili盲 Windows-palvelimellasi, joko \"VIERAS\" tili盲 "
-"tai tulostamiseen omistettua tili盲. 脛l盲 poista salasanaa henkil枚kohtaisesta "
-"tilist盲 tai j盲rjestelm盲valvojan tililt盲.\n"
+"Voit katsoa meid盲n laitteistotietokantaa osoitteesta:\n"
"\n"
-"Aseta Windows-palvelimesi jakamaan tulostinta LPD-protokollan kautta. Aseta "
-"sen j盲lkeen tulostus t盲st盲 koneesta k盲ytt盲m盲ll盲 \"%s\" yhteystyyppi盲 "
-"Printerdrake:ssa.\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "TURVAVAROITUS!"
+msgid "Configure Local Area Network..."
+msgstr "Aseta paikallisverkko..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba-jaon nimi puuttuu!"
+msgid "Launch the sound system on your machine"
+msgstr "K盲ynnist盲 盲盲nij盲rjestelm盲 tietokoneessasi"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Joko palvelimen nimi tai IP-numero on annettava!"
+msgid "Preparing printer database..."
+msgstr "Valmistellaan tulostintietokantaa..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Auto-detected"
-msgstr "Automaattinen tunnistus"
+msgid "Information"
+msgstr "Tiedot"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Ty枚ryhm盲"
+msgid "No network card"
+msgstr "Ei verkkokorttia"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Share name"
-msgstr "Jakonimi"
+msgid "Which filesystem do you want?"
+msgstr "Mink盲 tiedostoj盲rjestelm盲n haluat?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "SMB-palvelimen IP"
+msgid "3 buttons"
+msgstr "3 n盲pp盲int盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "SMB-palvelimen nimi"
+msgid "Detailed information"
+msgstr "Yksityiskohtaiset tiedot"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Jos haluttu tulostin tunnistettiin automaattisesti, sinun tarvitsee "
-"ainoastaan valita se listasta ja lis盲t盲 k盲ytt盲j盲nimi, salasana, ja/tai "
-"ty枚ryhm盲 tarvittaessa."
+msgid "Malta"
+msgstr "Malta"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"SMB-palvelimen tulostimelle tulostaaksesi sinun pit盲isi sy枚tt盲盲 SMB-koneen "
-"nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja mahdollisesti "
-"tulostuspalvelimen IP-osoite, tulostimen jakonimi sek盲 soveltuva "
-"k盲ytt盲j盲tunnus, salasana ja ty枚ryhm盲-tieto."
+"Tulostimen vakioasetukset\n"
+"\n"
+"Sinun kannattaisi varmistaa ett盲 paperiasetukset ja mustetyyppi/tulostustila "
+"(jos s盲盲dett盲viss盲) ja my枚s lasertulostimien laitteistoasetukset (muisti, "
+"kaksipuolinen tulostus, lis盲sy枚tt枚lokerot) ovat oikein m盲盲ritetty. Huomaa "
+"ett盲 korkean tulostuslaadun/resoluution k盲ytt枚 voi hidastaa tulostusnopeutta."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) -tulostimen parametrit"
+msgid "This floppy is not FAT formatted"
+msgstr "T盲m盲 levyke ei ole FAT-alustettu"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Tulostin \"%s\" palvelimella \"%s\""
+msgid "Configuring network"
+msgstr "Asetan verkkoa"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", tulostin \"%s\" palvelimella \"%s\""
+msgid "Graphic Card"
+msgstr "N盲yt枚nohjain"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Et盲tulostimen nimi puuttuu!"
+msgid "Resizing Windows partition"
+msgstr "Muutan Windows-osion kokoa"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Et盲palvelimen verkkonimi puuttuu!"
+msgid "Provider dns 1 (optional)"
+msgstr "Yhteydentarjoajan dns 1 (vapaaehtoinen)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Et盲tulostimen nimi"
+msgid "Cameroon"
+msgstr "Kamerun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "Et盲koneen verkkonimi"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"Voit nyt osioida kiintolevysi %s\n"
+"Kun olet valmis, 盲l盲 unohda tallentaa asetuksia komennolla `w'"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Close"
+msgstr "Sulje"
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
+msgstr ""
+"\"%s\": tarkista maa-asetukset. Jos et ole maassa, joka on valittu,\n"
+"paina \"%s\" painiketta ja valitse joku muu. Jos maasi ei ole\n"
+"listassa, paina \"%s\" painiketta jolloin n盲et listan kaikista maista."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Kalenteri"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
+"Palauta valittu\n"
+"luettelotietue"
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12336,796 +11287,1125 @@ msgstr ""
"Jotta voisit k盲ytt盲盲 lpd-et盲tulostinta, sinun pit盲isi sy枚tt盲盲 "
"tulostuspalvelimen verkkonimi sek盲 tulostimen nimi kyseisell盲 palvelimella."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Lpd-et盲tulostimen parametrit"
+msgid "Iceland"
+msgstr "Islanti"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Manuaalinen asettaminen"
+msgid "consolehelper missing"
+msgstr "consolehelper puuttuu"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Sinun t盲ytyy valita tai sy枚tt盲盲 tulostinlaite!"
+msgid "stopped"
+msgstr "pys盲htynyt"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Rinnakkaisportit: /dev/lp0, /dev/lp1, ..., vastaavat LPT1:, LPT2:, ..., 1. "
-"USB-tulostin: /dev/usb/lp0, 2. USB-tulostin: /dev/usb/lp1, ...)."
+msgid "Whether the FPU has an irq vector"
+msgstr "L枚ytyyk枚 irq-vektori FPU:sta"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Valitse portti, johon tulostimesi on kytketty."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Laajenna puu"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"Valitse portti, johon tulostimesi on kytketty tai sy枚t盲 laitteen tai "
-"tiedoston nimi sy枚teriville"
+"Vanha \"%s\" ajuri on 'mustalla listalla'.\n"
+"\n"
+"Sen on raportoitu kaatavan ytimen kun sit盲 poistetaan k盲yt枚st盲.\n"
+"\n"
+"Uusi \"%s\" ajuri otetaan k盲ytt枚枚n seuraavassa k盲ynnistyksess盲."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Valitse tulostin johon tulostusty枚t pit盲盲 ohjata."
+msgid "Expert Mode"
+msgstr "Asiantuntijatila"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Printer options"
+msgstr "Tulostimen asetukset"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Local Network adress"
+msgstr "Paikallisverkon osoite"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Varmista j盲rjestelm盲tiedostot. (hakemisto /etc)"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Ole hyv盲 ja valitse tulostin jota haluat asettaa. Tulostimen asetukset "
-"m盲盲ritet盲盲n automaattisesti. Jos tulostintasi ei tunnistettu oikein tai jos "
-"haluat r盲盲t盲l枚idyt tulostinasetukset valitse \"Manuaalinen asettaminen\"."
+"Sinulla on nyt mahdollisuus hakea p盲ivitetyt paketit. N盲m盲 paketit\n"
+"on julkaistu t盲m盲n jakelun julkaisun j盲lkeen. Ne voivat sis盲lt盲盲\n"
+"tietoturva- tai virhekorjauksia.\n"
+"\n"
+"Hakeaksesi n盲m盲 paketit, sinulla pit盲盲 olla toimiva Internetyhteys.\n"
+"\n"
+"Haluatko hakea ja asentaa p盲ivitykset?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "T盲ss盲 on lista tunnistetuista tulostimista: "
+msgid "Samba Server"
+msgstr "Samba palvelin"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Nykyhetkell盲 vaihtoehtoa ei ole olemassa"
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
+msgstr ""
+"Parametrit: (arg, alert=1)\n"
+"\n"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 IP spoofing suojaus."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Australian Optus cable TV"
+msgstr "Australian Optus cable TV"
+
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-"Tulostimen asetukset m盲盲ritet盲盲n automaattisesti. Jos tulostintasi ei "
-"tunnistettu oikein, tai jos haluat r盲盲t盲l枚idyt tulostinasetukset valitse "
-"\"Manuaalinen asettaminen\"."
+" <Tab>/<Alt-Tab> vaihtaa elementti盲 | <Space> valitsee | <F12> seuraava "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Seuraava tulostin tunnistettiin automaattisesti. "
+msgid "Subnet:"
+msgstr "Aliverkko:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the host name or IP."
+msgstr "Sy枚t盲 verkkoaseman nimi tai IP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "When"
+msgstr "Koska"
+
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Toinen nimipalvelin (ei pakollinen)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Suomi"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-"Valitse tulostin johon tulostusty枚t pit盲isi ohjata, tai sy枚t盲 laitteen tai "
-"tiedoston nimi sy枚teriville"
+"Parametrit: (arg)\n"
+"\n"
+"Salli kaikki palvelut joita ohjataan tcp_wrappers:ien kautta (katso \n"
+"hosts.deny(5)) jos \\fIarg\\fP = ALL. Vain paikalliset jos \n"
+"\\fIarg\\fP = LOCAL ja ei yht盲盲n jos \\fIarg\\fP = NONE. \n"
+"Salliaksesi tarvitsemasi palvelut, k盲yt盲 /etc/hosts.allow\n"
+"(katso hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Color depth: %s\n"
+msgstr "V盲rim盲盲r盲: %s\n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Et voi poistaa t盲m盲n paketin valintaa. Paketti pit盲盲 p盲ivitt盲盲."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Loading from floppy"
+msgstr "Ladataan levykkeelt盲"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Valitse tulostin jota haluat asettaa, tai sy枚t盲 laitteen tai tiedoston nimi "
-"sy枚teriville"
+"Drakperm:盲 k盲ytet盲盲n tiedostojen katseluun korjataksesi oikeudet, omistajat "
+"ja ryhm盲t msec:n kautta.\n"
+"Voit my枚s muokata omat s盲盲nn枚t jotka ylikirjoittavat oletuss盲盲nn枚t."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
+#, c-format
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Slovenia"
+msgstr "Slovenia"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"Enter a user\n"
+"%s"
msgstr ""
-"Vaihtoehtoisesti voit sy枚tt盲盲 laitteen tai tiedoston nimen sy枚teriville"
+"Lis盲盲 k盲ytt盲j盲\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"Jos se ei ole sama jota haluat asettaa, sy枚t盲 laite- tai tiedostonimi "
-"sy枚teriville"
+"- PCI- ja USB-laitteet: t盲m盲 listaa valmistajan, laitteen, alivalmistajan ja "
+"alilaitteen PCI/USB id:t"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Available printers"
-msgstr "Saatavilla olevat tulostimet"
+msgid "ProgressBar color selection"
+msgstr "Edistymispalkin v盲rivalinta"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Tulostinta ei l枚ydetty!"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"T盲ss盲 ovat t盲m盲nhetkiset k盲ynnistysvalikon tietueet.\n"
+"Voit lis盲t盲 uusia tai muuttaa olemassaolevia."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Sinun t盲ytyy sy枚tt盲盲 laitteen tai tiedoston nimi!"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Paikallista tulostinta ei l枚ydetty! Asentaaksesi tulostimen sy枚t盲 laitenimi/ "
-"tiedostonimi sy枚teriville (Rinnakkaisportti: /dev/lp0, /dev/lp1, ... "
-"vastaavat LPT1:, LPT2:,..., ensimm盲inen USB tulostin:/dev/usb/lp0, "
-"seuraava: /dev/usb/lp1, ...)"
+"Ajaa komentoja m盲盲r盲tyill盲 ajanhetkill盲, jotka on m盲盲ritelty at-komennolla.\n"
+"Ajaa my枚s er盲ajoja, kun j盲rjestelm盲n kuormitus on riitt盲v盲n matala."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Paikallinen tulostin"
+msgid "Radio support:"
+msgstr "Radiotuki:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB-tulostin \\#%s"
+msgid "Installing SANE packages..."
+msgstr "Asennan SANE paketteja..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Tulostin rinnakkaisportissa \\#%s"
+msgid "boot disk creation"
+msgstr "k盲ynnistyslevykkeen luominen"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Tulostin \"%s\" SMB/Windows palvelimella \"%s\""
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Verkkotulostin \"%s\", portissa %s"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Detected %s"
-msgstr "L枚ydetty %s"
+msgid "Change type"
+msgstr "Muuta tyyppi盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", tulostin \"%s\" , SMB/Windows palvelimella \"%s\""
+msgid "SILO Installation"
+msgstr "SILOn asennus"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", verkkotulostin \"%s\", portti %s"
+msgid "Use CD/DVDROM to backup"
+msgstr "K盲yt盲 CD/DVD-ROM -levy盲 varmuuskopioille"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-"Congratulations, your printer is now installed and configured!\n"
"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"Onnittelut, asennus on valmis.\n"
+"Poista k盲ynnistysmedia ja paina Enter k盲ynnist盲盲ksesi koneesi uudelleen.\n"
"\n"
-"Onnittelut, tulostimesi on nyt asennettu ja asetettu!\n"
"\n"
-"Voit tulostaa k盲ytt盲m盲ll盲 \"Tulosta\" toimintoa ohjelmassasi (yleens盲 "
-"\"Tiedosto\" valikossa).\n"
+"L枚yd盲t t盲h盲n Mandrake Linuxin versioon tarjollaolevat korjaukset ja\n"
+"korjattujen virheiden listan osoitteesta:\n"
"\n"
-"Jos haluat lis盲t盲, poistaa tai uudellennimet盲 tulostimen, tai jos haluat "
-"muuttaa oletusasetuksia (paperil盲hde, tulostuslaatu, ...), k盲ynnist盲 "
-"Mandraken Ohjauskeskus, valitse \"Laitteisto\" ja sitten \"Tulostin\"."
+"\n"
+"%s\n"
+"\n"
+"\n"
+"J盲rjestelm盲n asettamisesta saat tietoja virallisen Linux Mandraken\n"
+"k盲ytt盲j盲oppaan j盲lkiasennuskappaleesta."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Tunnista automaattisesti Windows-koneisiin liitetyt tulostimet"
+msgid "paranoid"
+msgstr "vainoharhainen"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Tunnista automaattisesti paikallisverkkoon liitetyt tulostimet"
+msgid "Send mail report after each backup to:"
+msgstr "L盲het盲 raportti jokaisesta varmuuskopiosta s盲hk枚postitse:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Tunnista automaattisesti t盲h盲n koneeseen liitetyt tulostimet"
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"T盲t盲 komentoa voit my枚s k盲ytt盲盲 monien ohjelmien tulostusdialogien "
+"\"Tulostuskomento\" kent盲ss盲, mutta t盲ss盲 sinun ei pid盲 m盲盲ritt盲盲 tiedoston "
+"nime盲 koska ohjelma m盲盲ritt盲盲 sen itse.\n"
+
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "N盲ytt枚tila"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"SMB-palvelimen tulostimelle tulostaaksesi sinun pit盲isi sy枚tt盲盲 SMB-koneen "
+"nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja mahdollisesti "
+"tulostuspalvelimen IP-osoite, tulostimen jakonimi sek盲 soveltuva "
+"k盲ytt盲j盲tunnus, salasana ja ty枚ryhm盲-tieto."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
"\n"
-"Tervetuloa Tulostimen asetusvelhoon\n"
-"\n"
-"T盲m盲 velho auttaa sinua asentamaan paikallisesti liitetyn tulostimen "
-"(tulostimia).\n"
-"\n"
-"Jos sinulla on paikallisesti liitetty tulostin (tulostimia), varmista ett盲 "
-"se/ne on kytketty p盲盲lle jotta se/ne voidaan tunnistaa automaattisesti.\n"
+" Accept/Refuse icmp echo."
+msgstr ""
+"Parametrit: (arg)\n"
"\n"
-"Paina \"Seuraava\" kun haluat jatkaa tai \"Peruuta\" jos et halua asettaa "
-"tulostinta (tulostimia) nyt."
+" Hyv盲ksy / Hylk盲盲 icmp echo viestit."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "reconfigure"
+msgstr "aseta uudelleen"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgstr ""
+"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa.\n"
+"HUOMAA, ETT脛 TUKI ON KOKEELLINEN JA VOI JUMIUTTAA TIETOKONEESI."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "Xinetd palvelu"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "oikeudet verkkoty枚kaluihin"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr "Firmwaren lataus HP LaserJet 1000 tulostimelle"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"\n"
-"Tervetuloa Tulostimen asetusvelhoon\n"
-"\n"
-"T盲m盲 velho auttaa sinua asentamaan paikallisesti liitetyn tai suoraan "
-"verkkoon liitetyn tulostimen (tulostimia).\n"
-"\n"
-"Jos sinulla on paikallisesti liitetty tulostin (tulostimia), varmista ett盲 "
-"se/ne on kytketty p盲盲lle jotta se/ne voidaan tunnistaa automaattisesti. My枚s "
-"verkkotulostin (tulostimet) pit盲盲 olla p盲盲ll盲.\n"
-"\n"
-"Huomaa ett盲 tulostimen tunnistaminen verkosta kest盲盲 kauemmin kuin "
-"paikallisten tulostimien tunnistus. Eli poista verkkotulostimien tunnistus "
-"jos et tarvitse sit盲.\n"
-"\n"
-"Paina \"Seuraava\" kun haluat jatkaa tai \"Peruuta\" jos et halua asettaa "
-"tulostinta (tulostimia) nyt."
+"Mandrake Linux 9.1 antaa sinulle mahdollisuuden k盲ytt盲盲 viimeisimpi盲 "
+"ohjelmia 盲盲nitiedostojen toistamiseen, kuvien muokkaukseen ja videoiden "
+"toistamiseen."
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr "T盲ss盲 on lista tunnistetuista tulostimista: "
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Virhe asennettaessa aboot:a,\n"
+"yrit盲nk枚 pakkoasennusta vaikka se tuhoaa ensimm盲isen osion?"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
+" In this step Drakbackup allow you to change:\n"
"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
msgstr ""
+"optioiden kuvaus:\n"
"\n"
-"Tervetuloa Tulostimen asetusvelhoon\n"
+"T盲ss盲 vaiheessa Drakbackup sallii sinua muuttaa:\n"
"\n"
-"T盲m盲 velho auttaa sinua asentamaan paikallisesti liitetyn, suoraan verkkoon "
-"liitetyn tai Windows et盲koneeseen liitetyn tulostimen (tulostimia).\n"
+" - Pakkaustapaa:\n"
"\n"
-"Jos sinulla on paikallisesti liitetty tulostin (tulostimia), varmista ett盲 "
-"se/ne on kytketty p盲盲lle jotta se/ne voidaan tunnistaa automaattisesti. My枚s "
-"verkkotulostin (tulostimet) ja Windows kone(et) pit盲盲 olla p盲盲ll盲.\n"
+" Jos valitset bzip2-pakkauksen, tietosi pakataan\n"
+" paremmin kuin gzip:ill盲 (noin 2-10%%).\n"
+" T盲m盲 optio ei ole valittu oletuksena, koska se\n"
+" vie enemm盲n aikaa ( noin 1000%% enemm盲n).\n"
"\n"
-"Huomaa ett盲 tulostimen tunnistaminen verkosta kest盲盲 kauemmin kuin "
-"paikallisten tulostimien tunnistus. Eli poista verkkotulostimien ja/tai "
-"Windows-tulostimien tunnistus, jos et tarvitse niit盲.\n"
+" - P盲ivitys-tila:\n"
"\n"
-"Paina \"Seuraava\" kun haluat jatkaa tai \"Peruuta\" jos et halua asettaa "
-"tulostinta (tulostimia) nyt."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+" t盲m盲 optio p盲ivitt盲盲 varmistuksesi, mutta t盲m盲 ei\n"
+" oikeastaan ole hyv盲 vaihtoehto, koska sinun tarvitsee\n"
+" purkaa varmistuksesi ennen kuin voit p盲ivitt盲盲 sen.\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
+" - .backupignore (varmista-ohita) tila:\n"
"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+" Niin kuin cvs, Drakbackup ohittaa kaikki viitteet jotka\n"
+" ovat sis盲llettyn盲 .backupignore tiedostoissa jokaisessa\n"
+" hakemistossa. Esim.:\n"
+" /*> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Restore Selected\n"
+"Files"
msgstr ""
-"\n"
-"Tervetuloa Tulostimen asetusvelhoon\n"
-"\n"
-"T盲m盲 velho sallii sinua asentamaan paikallisen tai et盲tulostimen jota "
-"voidaan k盲ytt盲盲 t盲st盲 koneesta ja my枚s verkon muista koneista.\n"
-"\n"
-"Sinulta kysyt盲盲n tarvittavia tietoja tulostimen asettamiseen, ja sinulle "
-"annetaan p盲盲sy kaikkiin tulostinajurehin, niiden asetuksiin ja "
-"yhteystyyppeihin."
+"Palauta\n"
+"valitut tiedostot"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
+"%s on olemassa, poistanko?\n"
"\n"
-"\n"
-"Printerdrake ei tunnistanut mit盲 mallia tulostimesi %s on. Ole hyv盲 ja "
-"valitse oikea malli listasta."
+"Varoitus: Jos olet jo suorittanut t盲m盲 prosessin, sinun pit盲盲\n"
+"todenn盲k枚isesti poistaa tietue authorized_keys tiedostosta palvelimella."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Please fill or check the field below"
+msgstr "T盲yt盲 tai tarkista alla olevat kent盲t."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on "
-msgstr ":ssa"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Haluatko tallentaa muutokset tiedostoon /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Boot Protocol"
+msgstr "K盲ynnistysprotokolla"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Asetetaan tulostinta..."
+msgid "LVM-disks %s\n"
+msgstr "LVM-levyt %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Etsii uusia tulostimia..."
+msgid "The package %s is needed. Install it?"
+msgstr "Paketti %s tarvitaan. Haluatko asentaa sen?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"HUOM: Tulostinmallista ja tulostusj盲rjestelm盲st盲 riippuen asennetaan jopa %d "
-"Mt tarvittavia lis盲ohjelmia"
+msgid "On boot"
+msgstr "K盲ynnistyksen yhteydess盲"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Oletko varma ett盲 haluat asettaa tulostuksen t盲ss盲 koneessa?\n"
+msgid "Bus identification"
+msgstr "V盲yl盲n tunniste"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Haluatko mahdollistaa tulostamisen yll盲 mainituissa tulostimissa?\n"
+msgid "Please make a backup of your data first"
+msgstr "Tee ensin varmuuskopio tiedoistasi"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Haluatko mahdollistaa tulostamisen paikallisverkon tulostimella?\n"
+msgid "Vatican"
+msgstr "Vatikaani"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Haluatko mahdollistaa tulostamisen yll盲 mainittuihin tulostimiin tai "
-"tulostimiin, jotka l枚ytyv盲t paikallisverkostasi?\n"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Sinulla on enemm盲n kuin yksi kiintolevy. Mille haluat asentaa Linuxin?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Varmista ett盲 kaikki tulostimesi on liitetty ja kytketty p盲盲lle).\n"
+msgid "Boot ISO"
+msgstr "K盲ynnistys-ISO"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Yht盲k盲盲n tulostinta ei l枚ydetty, joka on kytketty suoraan tietokoneeseesi"
+msgid "Eritrea"
+msgstr "Eritrea"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"L枚ytyy %d tuntemattomia tulostimia jotka on kytketty suoraan koneeseesi"
+msgid "Remove List"
+msgstr "Poista lista"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"L枚ytyy yksi tuntematon tulostin joka on kytketty suoraan koneeseesi"
+msgid "A customizable environment"
+msgstr "R盲盲t盲l枚it盲viss盲 oleva ymp盲rist枚"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Seuraava tulostin:\n"
-"\n"
-"%s%s\n"
-"on kytketty suoraan koneeseesi"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Seuraavat tulostimet:\n"
-"\n"
-"%s%s\n"
-"on kytketty suoraan koneeseesi"
+msgid "Morocco"
+msgstr "Marocco"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Seuraavat tulostimet:\n"
-"\n"
-"%s%s\n"
-"on kytketty suoraan koneeseesi"
+msgid "Which printer model do you have?"
+msgstr "Mik盲 tulostinmalli sinulla on?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "and %d unknown printers"
-msgstr " ja %d tuntematonta tulostinta "
+msgid "Add a new printer"
+msgstr "Lis盲盲 uusi tulostin"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr " ja yksi tuntematon tulostin "
+msgid " All of your selected data have been "
+msgstr " Kaikki valitsemasi tiedot on "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Checking your system..."
-msgstr "Tarkistan j盲rjestelm盲盲si..."
+msgid "<-- Delete"
+msgstr "<-- Poista"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr "K盲ynnistet盲盲n CUPS uudelleen..."
+msgid "Nepal"
+msgstr "Nepal"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "T盲m盲 palvelin on jo listassa, eik盲 sit盲 voida lis盲t盲 uudestaan.\n"
+msgid "cpu # "
+msgstr "cpu # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Esimerkkej盲 oikeista IP-numeroista:\n"
+msgid "chunk size"
+msgstr "palan koko"
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Sy枚tetty IP on virheellinen.\n"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "muokataksesi komennot ennen k~^Dynnistyst~^D, tai 'c' komentoriville."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Palvelimen IP puuttuu!"
+msgid "Problems installing package %s"
+msgstr "Ongelmia asennettaessa pakettia %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Jos porttia ei ole m盲盲ritetty, k盲ytet盲盲n oletusporttia 631"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Saat h盲lytyksen jos kuorma on t盲t盲 arvoa suurempi"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "Sy枚t盲 sen koneen IP-osoite ja portti jonka tulostimia haluat k盲ytt盲盲."
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
+msgstr ""
+"\n"
+"\n"
+"L盲hett盲盲ksesi virheraportin, paina \"Raportti\" painiketta.\n"
+"T盲m盲 avaa webbiselaimen osoitteen: https://drakbug.mandrakesoft.com\n"
+"mist盲 l枚yd盲t t盲ytett盲v盲n lomakkeen. Yll盲 n盲ytetyt tiedot l盲hetet盲盲n yll盲\n"
+"mainitulle palvelimelle.\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Tulostin CUPS-et盲palvelimella"
+msgid "Add a scanner manually"
+msgstr "Lis盲盲 kuvanlukija manuaalisesti"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "Poista valittu palvelin"
+msgid "Reload partition table"
+msgstr "Uudelleenlataa osiotaulu"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Edit selected server"
-msgstr "Muokkaa valittua palvelinta"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Kyll盲, haluan automaattisen sis盲盲nkirjautumisen (k盲ytt盲j盲, ymp盲rist枚)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Add server"
-msgstr "Lis盲盲 palvelin"
+msgid "Search for fonts in installed list"
+msgstr "Etsi kirjasimia asennettujen listalta"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Paikallisverkko ei loppunut '.0':aan, t盲ydennet盲盲n."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Boot"
+msgstr "K盲ynnistys"
+
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Tuner type:"
+msgstr "Vastaanottimen tyyppi:"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-"Lis盲盲 t盲h盲n CUPS-palvelimet, joiden tulostimia haluat k盲ytt盲盲. Sinun "
-"tarvitsee tehd盲 t盲m盲 vain mik盲li palvelimet eiv盲t l盲het盲 tulostintietojaan "
-"paikallisverkkoon."
+"Nyt on aika valita tulostusj盲rjestelm盲 tietokoneellesi. Muut k盲ytt枚-\n"
+"j盲rjestelm盲t saattavat tarjota sinulle yhden j盲rjestelm盲n, mutta Mandrake\n"
+"Linux tarjoaa kaksi. Kukin tulostusj盲rjestelm盲 sopii parhaiten tietyille\n"
+"asetuksille.\n"
+"\n"
+" * \"%s\" -- joka tarkoittaa ``tulosta, 盲l盲 jonota (print, don't queue)'',\n"
+"T盲m盲 on sopiva valinta jos sinulla on suora yhteys tulostimeesi ja haluat\n"
+"mahdollisuuden 'h盲t盲katkaisuun' jos tulostin on tukossa, eik盲 sinulla\n"
+"on verkkoon liitettyj盲 tulostimia. (\"%s\" tukee ainoastaan "
+"yksinkertaisimpia\n"
+"verkkoasetelmia ja on hidas verkkok盲ytt枚枚n.) Valitse \"pdq\" jos t盲m盲 on\n"
+"ensimm盲inen GNU/Linux tuttavuutesi.\n"
+"\n"
+" * \"%s\" -- ``Common Unix Printing System'', eli Yleinen Unix Tulostus-\n"
+"j盲rjestelm盲, on mainio tulostettaessa paikalliseen tulostimeen tai\n"
+"vaikkapa maapallon toiselle puolelle. Se on yksinkertainen j盲rjestelm盲\n"
+"ja voi toimia tulostuspalvelimena tai asiakkaana vanhalle \"lpd\"-\n"
+"tulostusj盲rjestelm盲lle. N盲in ollen, se on yhteensopiva vanhempien\n"
+"j盲rjestelmien kanssa. Se on monitaitoinen, mutta perusasetuksen\n"
+"teko on melkein yht盲 helppoa kuin \"pdq\". Jos tarvitset \"lpd\"-palvelimen\n"
+"emulointia, sinun pit盲盲 k盲ynnist盲盲 \"cups-lpd\" -demoni. \"%s\"\n"
+"sis盲lt盲盲 graafisen k盲ytt枚liittym盲n jota voidaan k盲ytt盲盲 tulostamiseen\n"
+"tai asetuksien tekoon.\n"
+"\n"
+"Jos teet valinnan nyt, ja my枚hemmin huomaat ettet pid盲 nykyisest盲\n"
+"tulostusj盲rjestelm盲st盲 voit muuttaa valintaasi Mandraken ohjauspaneelista\n"
+"l枚ytyv盲ss盲 PrinterDrakessa valitsemalla Asiantuntija-painikkeen."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "koneen/verkon IP-osoite:"
+msgid "\"Menu\" key"
+msgstr "\"Valikko\" n盲pp盲in"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "T盲m盲 kone/verkko on jo listassa, eik盲 sit盲 voida lis盲t盲 uudestaan.\n"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
+"\n"
+"\n"
+"Tarkista jos Printerdrake on tunnistanut tulostimesi mallin oikein. Etsi "
+"oikea malli kun kohdistin on v盲盲r盲ss盲 mallissa tai \"Raakatulostin\" "
+"valinnassa."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Sy枚tetty koneen/verkon IP on virheellinen.\n"
+msgid "Security Administrator:"
+msgstr "Turvallisuusyll盲pit盲j盲:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Koneen/verkon IP-osoite puuttuu."
+msgid "Please enter your login"
+msgstr "Sy枚t盲 k盲ytt盲j盲tunnuksesi"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-"Valitse verkko tai kone jolle paikalliset tulostimet pit盲isi asettaa "
-"k盲ytett盲viksi:"
+"jos asetettu, tarkistetaan tiedostojen oikeudet k盲ytt盲jien kotihakemistossa."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Paikallisten tulostimien jakaminen"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
+msgstr ""
+"Sinulla ei ole ainoatakaan Internet-yhteytt盲.\n"
+"Luo sellainen ensin klikkaamalla 'Aseta'"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Poista valittu kone/verkko"
+msgid "Fonts copy"
+msgstr "Kirjasimien kopioiminen"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Muokkaa valittua konetta/verkkoa"
+msgid "Automated"
+msgstr "Automaattinen"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Lis盲盲 kone/verkko"
+msgid "Do you want to test the configuration?"
+msgstr "Haluatko kokeilla asetuksia?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-"N盲m盲 ovat koneet ja verkot joissa paikallisesti liitetty tulostin pit盲isi "
-"olla k盲ytett盲viss盲."
+"Tulostin \"%s\" poistettiin Star Office/OpenOffice.org/GIMP k盲yt枚st盲 "
+"onnistuneesti."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Kun t盲m盲 optio on valittu, jokainen kerta kun CUPS k盲ynnistyy, seuraavat "
-"asiat varmistetaan:\n"
+"Vakio: T盲m盲 on vakio turvallisuustaso, jota suositellaan "
+"tietokoneelle \n"
+" joka yhdistet盲盲n Internetiin asiakaskoneena.\n"
"\n"
-"- jos LPD/LPRng on asennettu, CUPS ei ylikirjoita /etc/printcap\n"
+"Korkea: Joitakin turvallisuusrajoituksia on jo k盲yt枚ss盲, ja "
+"enemm盲n \n"
+" automaattisia tarkistuksia suoritetaan joka y枚.\n"
"\n"
-"- jos /etc/cups/cupsd.conf puuttuu, se luodaan.\n"
+"Korkeampi: Turvallisuustaso on nyt riitt盲v盲n korkea jotta j盲rjestelm盲n\n"
+" k盲ytt枚 palvelimena, joka voi palvella useaa k盲ytt盲j盲盲, on \n"
+" j盲rkev盲盲. Jos konettasi k盲ytet盲盲n ainoastaan asiakaskoneena\n"
+" Internetiss盲 suosittelemme matalampaa turvatasoa.\n"
"\n"
-"- kun tulostintiedot kuulutetaan, se ei sis盲ll盲 \"localhost\":a palvelimen "
-"nimen盲.\n"
+"Vainoharhainen: T盲m盲 on samankaltainen kuin edellinen taso, mutta "
+"j盲rjestelm盲\n"
+" on kokonaan suljettu, ja turvallisuusominaisuudet ovat\n"
+" korkeimmillaan.\n"
"\n"
-"Jos joku n盲ist盲 toiminnoista aiheuttaa sinulle ongelmia, poista t盲m盲 optio, "
-"mutta silloin sinun pit盲盲 itse huolehtia n盲ist盲 asioista."
+"Turvallisuusyll盲pit盲j盲:\n"
+" Jos 'Turvavaroitukset' -optio on valittu, n盲m盲 varoitukset\n"
+" l盲hetet盲盲n t盲lle k盲ytt盲j盲lle (k盲ytt盲j盲nimi tai s盲hk枚posti)"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "CUPS asetuksien automaattinen korjaus "
+msgid "Save packages selection"
+msgstr "Tallenna pakettien valinta"
-#: ../../printer/printerdrake.pm:1
+# mat
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Remove the last item"
+msgstr "Poista viimeinen alkio"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-"Ottamalla t盲m盲 k盲ytt枚枚n, sallit japaninkielisten tekstitiedostojen "
-"tulostaminen. K盲yt盲 t盲m盲 ainoastaan jos todellakin haluat tulostaa "
-"japaninkielinen teksti. Jos t盲m盲 on k盲yt枚ss盲 et voi en盲盲 tulostaa "
-"latinanfonttien erikoismerkkej盲 eik盲 asettaa marginaaleja, tekstikokoa, jne. "
-"T盲m盲 asetus koskee ainoastaan t盲ss盲 koneessa m盲盲ritettyj盲 tulostimia. Jos "
-"haluat tulostaa japaninkielinen teksti et盲koneessa olevassaa tulostimessa, "
-"sinun pit盲盲 asettaa t盲m盲 toimintosiin盲 koneessa."
+"Palautettava k盲ytt盲j盲lista (vain uusin p盲iv盲 kutakin k盲ytt盲j盲盲 kohti on "
+"t盲rke盲)"
-# Asennuksen sivuvalikko
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Japanese text printing mode"
-msgstr "Japaninkielen tekstitulostustila"
+msgid "No net boot images created!"
+msgstr "Yht盲k盲盲n verkkok盲ynnistyskuvaa ei ole luotu!"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "use pptp"
+msgstr "k盲yt盲 pptp:t盲"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Choose which services should be automatically started at boot time"
msgstr ""
-"Saadaksesi k盲ytt枚枚si paikallisverkon CUPS-palvelimilla olevat tulostimet "
-"sinun tarvitsee vain valita \"Etsi automaattisesti et盲koneilla olevat "
-"tulostimet\" -valinta; CUPS-palvelimet kertovat koneellesi automaattisesti "
-"tulostimistaan. Kaikki koneesi tunnistamat tulostimet n盲kyv盲t \"Et盲tulostimet"
-"\" osassa Printerdraken p盲盲ikkunassa. Mik盲li CUPS-palvelin/palvelimet eiv盲t "
-"ole paikallisverkossa sinun t盲ytyy m盲盲ritt盲盲 IP-osoitteet ja tarpeen mukaan "
-"porttinumerot saadaksesi tulostintiedot palvelimilta."
+"Valitse mitk盲 palvelut k盲ynnistet盲盲n automaattisesti koneen k盲ynnistyksen "
+"yhteydess盲"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "None"
-msgstr "Ei mit盲盲n"
+msgid "Learn how to use this printer"
+msgstr "Opi kuinka k盲ytt盲盲 t盲t盲 tulostinta"
+# Asennuksen sivuvalikko
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Muut CUPS-palvelimet:"
+msgid "Configure the network now"
+msgstr "Aseta verkkoyhteys nyt"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No remote machines"
-msgstr "Ei et盲koneita"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Valitse peilipalvelin josta paketit haetaan"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Custom configuration"
-msgstr "Mukautettu asetus"
+msgid ""
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
+msgstr ""
+"FAT-tiedostoj盲rjestelm盲n koon muuttaja ei osaa k盲sitell盲 osiotasi,\n"
+"seuraava virhe tapahtui: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Tulostimen jako koneissa/verkoissa: "
+msgid "Which sector do you want to move it to?"
+msgstr "Mille sektorille haluat siirt盲盲?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Etsi k盲ytett盲viss盲 olevia tulostimia et盲koneista automaattisesti"
+msgid "Do you want to click on this button?"
+msgstr "Haluatko klikata t盲t盲 painiketta?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Tulostimet t盲ss盲 koneessa ovat muiden koneiden k盲ytett盲viss盲"
+msgid "Bahamas"
+msgstr "Bahama"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Manual configuration"
+msgstr "Manuaalinen asettaminen"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr "etsi"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Voit my枚s m盲盲ritt盲盲 t盲盲ll盲 tulisiko et盲koneiden tulostimien olla "
-"automaattisesti k盲ytett盲viss盲 t盲ss盲 koneessa."
+"Paketti lataa valitun n盲pp盲inkartan /etc/sysconfig/keyboard\n"
+"tiedoston asetusten mukaisesti. Asetukset voidaan valita kbdconfig "
+"ty枚kalulla.\n"
+"T盲m盲 tulisi ottaa k盲ytt枚枚n l盲hes kaikissa j盲rjestelmiss盲."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (n盲yt枚nohjaimen ajurin asennus)"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf host name must not contain a ."
+msgstr "Zeroconf konenimi ei saa sis盲lt盲盲 . (pistett盲)."
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"T盲盲ll盲 voit m盲盲ritt盲盲 mik盲li t盲h盲n koneeseen liitetyt tulostimien pit盲isi "
-"olla k盲ytett盲viss盲 et盲koneissa ja miss盲 et盲koneissa."
+"Syslog on tapa jolla monet palvelut kirjoittavat viestins盲 talteen\n"
+"useisiin lokitiedostoihin. On j盲rkev盲盲 k盲ytt盲盲 syslog-ohjelmaa."
+
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Unknown/Others"
+msgstr "Tuntematon/Muut"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "No TV Card detected!"
+msgstr "Yht盲k盲盲n TV-korttia ei l枚ydetty."
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Optiot"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS tulostus asetukset"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Tulostin \"%s\" on asetettu oletustulostimeksi."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid ""
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Tulostimen automaattitunnistus (paikallinen, TCP/Socket ja SMB-tulostimet )"
+"Olet asettamassa OKI laser wintulostinta. N盲m盲 tulostimet k盲ytt盲v盲t hyvin "
+"erikoista kommunikointiprotokollaa ja sen takia ne toimivat ainoastaan "
+"liitettyn盲 ensimm盲iseen rinnakkaisporttiin. Jos tulostimesi on liitetty "
+"toiseen porttiin tai tulostuspalvelimeen sinun t盲ytyy liitt盲盲 tulostin "
+"ensimm盲iseen rinnakkaisporttiin ennen kuin tulostat testisivun. Muussa "
+"tapauksessa tulostin ei toimi. Ajuri ei v盲lit盲 asettamastasi yhteystavasta."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Prosessorin sukupolvi (esim.: Pentium III on 8, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
+msgid "Auto-detected"
+msgstr "Automaattinen tunnistus"
+
+#: ../../standalone/drakpxe:1
+#, c-format
msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"Olet aikeissa asettaa tietokoneesi asentamaan PXE palvelimen toimimaan "
+"DHCP-\n"
+"palvelimena, ja TFTP palvelimen rakentaaksesi asennuspalvelimen.\n"
"\n"
-"Tulostimia, jotka ovat CUPS-et盲palvelimella, ei tarvitse asettaa\n"
-"t盲ss盲; n盲m盲 tulostimet tunnistetaan automaattisesti."
+"T盲ll盲 ominaisuudella muut paikallisverkossa olevat tietokoneet voidaan \n"
+"asentaa k盲ytt盲m盲ll盲 t盲m盲n palvelimen tietoja.\n"
+"\n"
+"Varmista ett盲 olet m盲盲ritt盲nyt verkkosi/Internetyhteytesi k盲ytt盲m盲ll盲 "
+"drakconnect:a ennen kuin jatkat.\n"
+"\n"
+"Huomaa: tarvitset erityisen verkkokortin pystytt盲盲ksesi oman paikallisverkon."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Miten tulostin on liitetty?"
+msgid ""
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
+msgstr ""
+"Ei vapaata tilaa 1 Mt:n k盲ynnistyslohkoa varten! Asennusta jatketaan, mutta "
+"k盲ynnist盲盲ksesi j盲rjestelm盲n sinun pit盲盲 luoda k盲ynnistyslohko-osio "
+"DiskDrake:ssa."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Valitse tulostinyhteys"
+msgid ""
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
+msgstr ""
+"Valitse tulostin jota haluat asettaa, tai sy枚t盲 laitteen tai tiedoston nimi "
+"sy枚teriville"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Kielt盲ydy"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
+msgstr ""
+"HardDrake etsii uutta laitteistoa ja mahdollisesti konfiguroi\n"
+"uuden/muuttuneen laitteiston."
+
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#, c-format
+msgid "Remote Printers"
+msgstr "Et盲tulostimet"
+
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "Luon ja alustan tiedostoa %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "jos asetettu, tarkistetaan 'sgid' tiedostojen lis盲ykset/poistamiset."
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -13143,340 +12423,360 @@ msgstr ""
"levyll盲 oleva firmware ei toimi) ja purkaa itsepurkautuva '.exe' tiedostoa "
"k盲ytt盲en 'unzip' ty枚kalu ja etsi 'sihp1000.img' tiedosto. Kopioi t盲m盲 "
"tiedosto hakemistoon '/etc/printer'. Sielt盲 automattinen lataamisskripti "
-"l枚yt盲盲 sen ja lataa sen tulosimelle joka kerta kun sit盲 on litetty ja "
+"l枚yt盲盲 sen ja lataa sen tulostimelle joka kerta kun sit盲 on liitetty ja "
"k盲ynnistet盲盲n.\n"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Parametrit: (umask)\n"
-"\n"
-"Aseta k盲ytt盲j盲n umask."
+msgid "Choose an existing LVM to add to"
+msgstr "Valitse olemassaoleva LVM johon lis盲t盲盲n"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-"Parametrit: (val)\n"
-"\n"
-"Asettaa komentotulkin aikaviiveen. Arvo 0 (nolla) poistaa aikaviiveen."
+msgid "xfs restart"
+msgstr "xfs:n uudelleenk盲ynnistys"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
-"Parametrit: (size)\n"
-"\n"
-"Asettaa komentotulkin historian koon. Arvo -1 tarkoittaa rajoittamatonta."
+"Tulostin \"%s\" on jo olemassa,\n"
+"haluatko todellakin korvata olemassa olevat asetukset?"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "jos asetettu, tarkistetaan 'sgid' tiedostojen lis盲ykset/poistamiset."
+msgid "No partition available"
+msgstr "ei vapaita osioita"
-#: ../../security/help.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "jos asetettu, tarkistetaan avoimet portit."
+msgid "Use the scanners on hosts: "
+msgstr "K盲yt盲 kuvanlukijoita koneissa: "
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr "jos asetettu, l盲het盲 raportit t盲h盲n osoitteeseen, muuten root saa ne."
+msgid "Unselected All"
+msgstr "Poista valinta kaikista"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "jos asetettu, raportoi tarkistuksen tulos s盲hk枚postitse."
+msgid "Domain Name Resolver"
+msgstr "Verkkoalueen nimiratkaisija"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"jos asetettu, tarkistetaan sallivatko tiedostot/hakemistot kirjoituksen "
-"kaikille."
+msgid "Encryption key (again)"
+msgstr "Salausavain (uudelleen)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "jos asetettu, raportoi tarkistuksen tulokset n盲yt枚lle."
+msgid "Samba share name missing!"
+msgstr "Samba-jaon nimi puuttuu!"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "jos asetettu, suoritetaan tarkistuksia rpm-tietokannassa."
+msgid "True Type install done"
+msgstr "True Type -asennus valmis"
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"jos asetettu, tarkistetaan ovatko verkkolaitteet 'promiscuous' tilassa."
+msgid "Detection in progress"
+msgstr "Tunnistus k盲ynniss盲 ..."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "jos asetettu, suoritetaan chkrootkit tarkistuksia."
+msgid "Build Whole Kernel -->"
+msgstr "K盲盲nn盲 koko ydin -->"
-#: ../../security/help.pm:1
+# mat
+#: ../../install_steps.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"jos asetettu, tarkistetaan tiedostojen oikeudet k盲ytt盲jien kotihakemistossa."
+msgid "Welcome to %s"
+msgstr "Tervetuloa %s:n"
-#: ../../security/help.pm:1
+# mat
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"jos asetettu, tarkistetaan 'suid root' tiedostojen lis盲ykset/poistamiset."
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Aseta moduulien p盲ivityslevyke asemaan %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "jos asetettu, raportoidaan tarkistuksen tulokset syslog:iin."
+msgid "Bootsplash"
+msgstr "Bootsplash"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
-"jos asetettu, tarkistetaan tyhj盲t salasanat, salasanan puuttuminen "
-"tiedostossa /etc/shadow ja muut k盲ytt盲j盲t kuin root joiden id on 0."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "jos asetettu, suoritetaan p盲ivitt盲iset turvallisuustarkistukset."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "jos asetettu, tarkistetaan 'suid/sgid' tiedostojen tarkistussumma."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "jos asetettu, tarkistetaan tyhj盲t salasanat tiedostossa /etc/shadow."
+"Seuraava tulostin:\n"
+"\n"
+"%s%s\n"
+"on kytketty suoraan koneeseesi"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "jos asetettu, raportoidaan omistamattomat tiedostot."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Tulostimen jako koneissa/verkoissa: "
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-"Parametrit: (umask)\n"
"\n"
-"Aseta root umask."
+"\"%s\" komento tarjoaa my枚s mahdollisuuden muokata asetukset erityiselle "
+"tulostusty枚lle. Voit yksinkertaisesti lis盲t盲 halutut asetukset "
+"komentoriville, esim.: \"%s <tiedosto>\". "
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"Parametrit: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Aseta salasanojen v盲himm盲ispituus sek盲 v盲himm盲ism盲盲r盲 numeroita ja isoja "
-"kirjaimia."
+"Joissakin tapauksissa %s-ajuri tarvitsee lis盲tietoja toimiakseen kunnolla,\n"
+"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
+"lis盲m盲盲reit盲 vai annatko sen itse etsi盲 tarvitsemansa tiedot? Joskus haku\n"
+"voi jumiuttaa tietokoneen, mutta se ei pit盲isi aiheuta vahinkoa."
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Aseta salasanojen historian pituus est盲盲ksesi salasanojen k盲ytt盲mist盲 "
-"uudelleen."
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Ei oikein nimetty CD. CD:n nimike on: %s."
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Parametrit: (max, inactive=-1)\n"
+"Tervetuloa Internetyhteyden jakamisen apuohjelmaan!\n"
"\n"
-"Asettaa salasanojen vanhenemisen \\fImax\\fP p盲iv盲盲n ja viiveen "
-"vaihtamiselle \\fIinactive\\fP."
+"%s\n"
+"\n"
+"Paina Aseta k盲ynnist盲盲ksesi asennusvelhon."
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Parametrit: (name)\n"
-"\n"
-"Lis盲盲 nimi jota msec:n salasanojen vanheneminen ei koske."
+msgid "Cuba"
+msgstr "Kuuba"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / Poista k盲yt枚st盲 sulogin(8) yhden k盲ytt盲j盲n tasossa."
+msgid "Searching for new printers..."
+msgstr "Etsii uusia tulostimia..."
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 p盲ivitt盲iset turvallisuustarkistukset."
+msgid "Belize"
+msgstr "Belize"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 verkkokorttien 'promiscuous' tarkistus."
+msgid " (multi-session)"
+msgstr " (multi-sessio)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"K盲yt盲 salasanoja k盲ytt盲jien tunnistamiseen."
+msgid "Kernel Boot Timeout"
+msgstr "Ytimen k盲ynnistysviive"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Salli 'su' vain 'wheel' ryhm盲盲n kuuluville j盲senille, tai salli komento "
-"kaikille."
+"N盲yt枚nohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
+"ssa.\n"
+"Korttisi on tuettu my枚s XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-#: ../../security/help.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 msec turvallisuustarkistukset joka tunti."
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX-Osiointivelho l枚ysi seuraavat ratkaisut:"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 ep盲tavallisten IPv4 pakettien kirjaaminen "
-"lokiin."
+msgid "Hungarian"
+msgstr "Unkari"
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 libsafe jos se l枚ytyy j盲rjestelm盲st盲."
+"Valitse palveluntarjoajasi.\n"
+"Jos se ei ole listassa, valitse `Ei listattu'"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Parametrit: (arg, alert=1)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 IP spoofing suojaus."
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Automaattinen kellon synkronisointi (k盲ytt盲en NTP:t盲)"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 Mt"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "LDAP-palvelin"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"Parametrit: (arg, alert=1)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 nimiselvityksen spoofing suojaus.\n"
-"Jos \\fIalert\\fP on tosi, raportoidaan my枚s syslog:iin."
+"PCMCIA tukea k盲ytet盲盲n yleens盲 kannettavissa ethernet- ja modeemi-\n"
+"korttien tukemiseen. Palvelu ei k盲ynnisty ellei sit盲 ole asetettu, joten\n"
+"sen voi asentaa my枚s koneisiin jotka eiv盲t sit盲 tarvitse."
-#: ../../security/help.pm:1
+# Asennuksen sivuvalikko
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "Valitse maasi"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"- System Files:\n"
msgstr ""
-"Parametrit: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 syslog:n raportin ohjaus konsoliin 12.\n"
-"\\fIexpr\\fP m盲盲r盲盲 mit盲 pit盲盲 kirjoittaa lokiin (katso syslog.conf(5) \n"
-"saadaksesi lis盲tietoja), ja dev mihin laitteeseen raportoidaan."
+"- J盲rjestelm盲tiedostot:\n"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Standalone Tools"
+msgstr "Itsen盲isi盲 ty枚kaluja"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Where"
+msgstr "Miss盲"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "but not matching"
+msgstr "mutta ei t盲sm盲盲"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Ota k盲ytt枚枚n / poista k盲yt枚st盲 crontab ja at k盲ytt盲jille. Laita hyv盲ksytyt "
-"k盲ytt盲j盲t tiedostoihin '/etc/cron.allow' ja '/etc/at.allow'. (katso man at"
-"(1) ja crontab(1))."
+"T盲盲ll盲 voit valita vaihtoehtoisen ajurin (OSS tai ALSA) 盲盲nikortillesi (%s)."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Asetan PCMCIA kortteja..."
+
+#: ../../common.pm:1
+#, c-format
+msgid "kdesu missing"
+msgstr "kdesu puuttuu"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr "Salausavain"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Joulusaari"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "J盲rjestelm盲lataajan asennus ep盲onnistui. Seuraava virhe tapahtui:"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI-kanava"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Set this printer as the default"
+msgstr "Aseta t盲m盲 tulostin oletukseksi"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "partition %s"
+msgstr "osio %s"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Paranoid"
+msgstr "Vainoharhainen"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
+msgstr "<-- Poista k盲ytt盲j盲"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Location on the bus"
+msgstr "Sijainti v盲yl盲ss盲"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "No printer found!"
+msgstr "Tulostinta ei l枚ydetty!"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the vendor name of the device"
+msgstr "laitteen valmistaja"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Erase entire disk"
+msgstr "Tyhjenn盲 koko levy"
+
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Default)"
+msgstr " (Oletus)"
#: ../../security/help.pm:1
#, c-format
@@ -13501,215 +12801,398 @@ msgstr ""
"'chkconfig --add' k盲ytt盲盲 '/etc/security/msec/server' p盲盲tt盲盲kseen jos\n"
"palvelu pit盲盲 asettaa vai ei asennuksen aikana."
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Salli kaikki palvelut joita ohjataan tcp_wrappers:ien kautta (katso \n"
-"hosts.deny(5)) jos \\fIarg\\fP = ALL. Vain paikalliset jos \n"
-"\\fIarg\\fP = LOCAL ja ei yht盲盲n jos \\fIarg\\fP = NONE. \n"
-"Salliaksesi tarvitsemasi palvelut, k盲yt盲 /etc/hosts.allow\n"
-"(katso hosts.allow(5))."
+msgid "Automatic reconfiguration"
+msgstr "Automaattinen uudelleenasetus"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Parametri m盲盲r盲盲 sallitaanko asiakkaiden yhdist盲盲 X-palvelimelle\n"
-"TCP-portissa 6000 vai ei."
+msgid "Receiving Speed:"
+msgstr "Vastaanottonopeus:"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Parametrit: (arg, listen_tcp=None)\n"
-"\n"
-"Salli / Est盲 X-yhteydet. Ensimm盲inen arg m盲盲r盲盲 mit盲 tehd盲盲n\n"
-"asiakaspuolella: ALL (kaikki yhteydet sallitaan), LOCAL (ainoastaan\n"
-"paikalliset yhteydet) ja NONE (ei yhteytt盲)."
+msgid "Turks and Caicos Islands"
+msgstr "Turks ja Caicossaaret"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Salli / Est盲 j盲rjestelm盲n k盲ytt盲jien listaus n盲yt枚nhallinnassa (kdm ja gdm)."
+msgid "permissions"
+msgstr "oikeudet"
-#: ../../security/help.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "<- Previous"
+msgstr "<- Edellinen"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Internetyhteyden jakamisen asetukset"
+
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Toggle between flat and group sorted"
+msgstr "Vaihda tasaisen ja ryhm盲j盲rjestyksen v盲lill盲"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Themes"
+msgstr "Teemat"
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Options: %s"
+msgstr "Optiot: %s"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-"Salli / Est盲 root sis盲盲nkirjautuminen paikallisesti."
+"T盲ll盲 hetkell盲 k盲yt枚ss盲 oleva j盲rjestelm盲lataaja on %s.\n"
+"Valitse Aseta k盲ynnist盲盲ksesi asennusvelhon."
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "OKI winprinter configuration"
+msgstr "OKI wintulostimen asettaminen"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "Saint Helena"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Security Level"
+msgstr "Turvataso"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
+"Some steps are not completed.\n"
"\n"
-"Allow/Forbid remote root login."
+"Do you really want to quit now?"
msgstr ""
-"Parametrit: (arg)\n"
+"Joitain vaiheita ei ole saatettu loppuun.\n"
"\n"
-"Salli / Est盲 root sis盲盲nkirjautuminen et盲yhteyksilt盲."
+"Haluatko todella lopettaa?"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Sudan"
+msgstr "Sudan"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish (qwertz layout)"
+msgstr "Puola (qwertz j盲rjestys)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Syria"
+msgstr "Syyria"
+
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Allow/Forbid reboot by the console user."
msgstr ""
-"Parametrit: (arg)\n"
+"Tervetuloa %s k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!\n"
+"\n"
+"Valitse k~^Dytt~^Tj~^Drjestelm~^D yll~^D olevasta listasta tai\n"
+"odota %d sekuntia oletusk~^Dynnistyst~^D.\n"
"\n"
-"Salli / Est盲 'reboot' konsolin k盲ytt盲jille."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Portuguese"
+msgstr "Portugali"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback file name: "
+msgstr "Loopback tiedostonimi: "
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS palvelimen osoite pit盲盲 olla muotoa 1.2.3.4"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Serbia"
+msgstr "Serbia"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Newzealand"
+msgstr "Uusi-Seelanti"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "This directory should remain within the root filesystem"
+msgstr "T盲m盲n hakemiston pit盲isi olla juuritiedostoj盲rjestelm盲ss盲"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "CapsLock key"
+msgstr "CapsLock n盲pp盲in"
+
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
+#, c-format
+msgid "Install bootloader"
+msgstr "Lataajan asetus"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Select the memory size of your graphics card"
+msgstr "Valitse n盲yt枚nohjaimen muistin m盲盲r盲"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"Parametrit: (arg)\n"
+"[OPTIOT]\n"
+"Verkko & Internet yhteys- ja seurantasovellus\n"
"\n"
-"Jos \\fIarg\\fP = ALL salli /etc/issue ja /etc/issue.net olemassaolo. Jos "
-"\\fIarg\\fP = NONE kumpaakaan\n"
-"ei sallita muutoin sallitaan ainoastaan/etc/issue."
+"--defaultintf liitynt盲 : n盲yt盲 t盲m盲 liitynt盲 oletuksena.\n"
+"--connect : avaa yhteyden Internetiin jos sit盲 ei ole.\n"
+"--disconnect : sulkee yhteyden Internetiin jos se on olemassa.\n"
+"--force : k盲yt盲 (dis)connect:in kanssa : pakota yhteyden avaus/sulkeminen.\n"
+"--status : palauttaa 1 jos yhteys on avattu, muuten 0, ja poistuu.\n"
+"--quiet : ei-interaktiivinen tila. K盲ytet盲盲n (dis)connect:in kanssa."
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Dynamic IP Address Pool:"
+msgstr "Dynaaminen IP-osoiteavaruus:"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM name?"
+msgstr "LVM:n nimi?"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Joitakin laitteita luokasta \"%s\" poistettiin:\n"
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Found %s %s interfaces"
+msgstr "L枚ysin %s %s liit盲nn盲t"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "sticky-bit"
+msgstr "tahmea-bitti"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Post Install"
+msgstr "Asennuksen j盲lkeiset toiminnot"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The internal domain name"
+msgstr "Sis盲inen verkkoalueen nimi"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IRQ"
+msgstr "Kortin IRQ"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
+"Arguments: (umask)\n"
"\n"
-"Allow/Forbid autologin."
+"Set the user umask."
msgstr ""
-"Parametrit: (arg)\n"
+"Parametrit: (umask)\n"
"\n"
-"Salli / Est盲 automaattinen sis盲盲nkirjautuminen."
+"Aseta k盲ytt盲j盲n umask."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
+#, c-format
+msgid "logdrake"
+msgstr "logdrake"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-" Hyv盲ksy / Hylk盲盲 icmp echo viestit."
+"Kirjasinten tuonti- ja valvontasovellus\n"
+"--windows_import : tuo kaikilta k盲ytett盲viss盲 olevilta windows-osioilta.\n"
+"--xls_fonts : n盲yt盲 kaikki olemassa olevat xls-kirjasimet\n"
+"--strong : vahva kirjasinten verifiointi.\n"
+"--install : hyv盲ksy mik盲 tahansa kirjasin ja hakemisto.\n"
+"--uninstall : poista mik盲 tahansa kirjasin tai kirjasinhakemisto.\n"
+"--replace : korvaa kaikki olemassaolevat kirjasimet.\n"
+"--application : 0 ei ohjelmistoa.\n"
+" : 1 kaikki olemassaolevat ohjelmistot tuettu.\n"
+" : ohjelmiston_nimi, eli so vastaa StarOfficea\n"
+" : ja gs vastaa GhostScripti盲."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
+#, c-format
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Valitse levykeasema jolla luot k盲ynnistyslevykkeen"
+
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with text menu"
+msgstr "LILO tekstipohjaisella valikolla"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "Everything (no firewall)"
+msgstr "Kaikki (ei palomuuria)"
+
+#: ../../any.pm:1
+#, c-format
+msgid "You must specify a kernel image"
+msgstr "Sinun t盲ytyy m盲盲ritell盲 ydin"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", multi-function device on USB"
+msgstr ", monik盲ytt枚laite USB:ssa"
+
+#: ../../interactive/newt.pm:1
+#, c-format
+msgid "Do"
+msgstr "Tee"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Yhdist盲n peilipalvelimeen hakeakseni uusimman pakettilistan..."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (old)"
+msgstr "Liettua AZERTY (vanha)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasilia"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
+msgstr "koneen/verkon IP-osoite:"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Parametrit: (arg)\n"
-"\n"
-" Hyv盲ksy / Hylk盲盲 kuulutetut icmp echo viestit."
+"edistymispalkin y-kordinaatti\n"
+"(vasen yl盲kulma)"
+
+#: ../../install_gtk.pm:1
+#, c-format
+msgid "System installation"
+msgstr "J盲rjestelm盲n asennus"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint Vincent ja Grenadiinit"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Open"
+msgstr "/Tiedosto/_Avaa"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
"Parametrit: (arg)\n"
"\n"
-"Hyv盲ksy / Hylk盲盲 virheelliset IPv4 virheviestit."
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Tietoturvan yll盲pit盲j盲 (tunnus tai s盲hk枚posti)"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Kirjasto, joka suojelee puskurin ylivuoto- ja merkkijonon "
-"muotovirhehykk盲yksi盲 vastaan."
+"Parametri m盲盲r盲盲 sallitaanko asiakkaiden yhdist盲盲 X-palvelimelle\n"
+"TCP-portissa 6000 vai ei."
-#: ../../security/level.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Use libsafe for servers"
-msgstr "K盲yt盲 libsafea palvelimille"
+msgid "Location of auto_install.cfg file"
+msgstr "auto_install.cfg tiedoston sijainti"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Security level"
-msgstr "Turvataso"
+msgid "Open Firmware Delay"
+msgstr "Vapaa Firmware -viive"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Valitse haluttu turvataso"
+msgid "Hungary"
+msgstr "Unkari"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DracSec perusoptiot"
+msgid "Total progess"
+msgstr "Kokonaisedistyminen"
-#: ../../security/level.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Pohjautuu edelliseen tasoon, mutta j盲rjestelm盲 on kokonaan suljettu.\n"
-"Turvallisuusasetukset ovat tiukimmillaan."
+msgid "Color configuration"
+msgstr "V盲riasetukset"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"T盲ll盲 turvatasolla t盲m盲n j盲rjestelm盲n k盲ytt枚 palvelimena on mahdollista.\n"
-"Turvallisuustaso on riitt盲v盲n korkea, jotta j盲rjestelm盲盲 voi k盲ytt盲盲 "
-"palvelimena,\n"
-"joka hyv盲ksyy monia yhteyksi盲 asiakaskoneilta. Huomaa: Jos koneesi on\n"
-"ainoastaan asiakaskone Internetiss盲, sinun kannattaisi valita alhaisempi "
-"turvataso."
+msgid "New Zealand"
+msgstr "Uusi-Seelanti"
#: ../../security/level.pm:1
#, c-format
@@ -13720,904 +13203,787 @@ msgstr ""
"Jotkin rajoitukset on voimassa ja enemm盲n automaattisia \n"
"tarkistuksia suoritetaan joka y枚."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"T盲m盲 on vakio turvataso, jota suositellaan tietokoneelle, jota k盲ytet盲盲n\n"
-"Internetiss盲 asiakaskoneena."
+msgid "please choose the date to restore"
+msgstr "Valitse p盲iv盲m盲盲r盲, johon tiedon palauttaminen tehd盲盲n"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Switching from ext2 to ext3"
+msgstr "Vaihdan ext2:sta ext3:een"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "Alankomaiden Antillit"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
+msgstr "Selaa uuteen palautus s盲ilytykseen."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Salasanat ovat nyt k盲yt枚ss盲, mutta koneen k盲ytt枚 verkossa ei ole suositeltua."
+"\n"
+"Tervetuloa Tulostimen asetusvelhoon\n"
+"\n"
+"T盲m盲 velho sallii sinua asentamaan paikallisen tai et盲tulostimen jota "
+"voidaan k盲ytt盲盲 t盲st盲 koneesta ja my枚s verkon muista koneista.\n"
+"\n"
+"Sinulta kysyt盲盲n tarvittavia tietoja tulostimen asettamiseen, ja sinulle "
+"annetaan p盲盲sy kaikkiin tulostinajureihin, niiden asetuksiin ja "
+"yhteystyyppeihin."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and %d unknown printers"
+msgstr " ja %d tuntematonta tulostinta "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"T盲t盲 tasoa tulee k盲ytt盲盲 varoen. Se tekee j盲rjestelm盲st盲si helpomman "
-"k盲ytt盲盲,\n"
-"mutta hyvin herk盲n: sit盲 ei tule k盲ytt盲盲 koneessa joka on kytketty muihin "
-"koneisiin\n"
-"tai Internettiin. Koneessa ei ole salasanoja."
+"Varhaisimmista Intel Pentium prosessorien liukulukuyksik枚st盲 l枚ytyy virhe, "
+"joka heikent盲盲 tarkkuutta kun suoritetaan liukuluvun jakoa (FDIV)"
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Vainoharhainen"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "ISDN PCI-korttia ei l枚ydetty. Valitse yksi seuraavasta ruudusta."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Higher"
-msgstr "Korkeampi"
+msgid "GB"
+msgstr "Gt"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "Korkea"
+msgid "Please give a user name"
+msgstr "Anna k盲ytt盲j盲tunnus"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Huono"
+msgid "Enable CD Boot?"
+msgstr "Mahdollista CD-k盲ynnistys?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Tervetuloa murtautujat"
+msgid " enter `void' for void entry"
+msgstr " kirjoita 'void' jos haluat tyhj盲n tietueen"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Kirjaudu uudelleen %s:een aktivoidaksesi muutokset"
+msgid "on Hard Drive"
+msgstr "kiintolevylle"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Kirjaudu ulos ja k盲yt盲 sen j盲lkeen Ctrl-Alt-Askelpalautin"
+msgid "Winmodem connection"
+msgstr "Winmodeemi-yhteys"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow ja /etc/hosts.deny on jo asetettu - ei muutoksia"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"Onnittelut, tulostimesi on nyt asennettu ja asetettu!\n"
+"\n"
+"Voit tulostaa k盲ytt盲m盲ll盲 \"Tulosta\" toimintoa ohjelmassasi (yleens盲 "
+"\"Tiedosto\" valikossa).\n"
+"\n"
+"Jos haluat lis盲t盲, poistaa tai uudelleennimet盲 tulostimen, tai jos haluat "
+"muuttaa oletusasetuksia (paperil盲hde, tulostuslaatu, ...), k盲ynnist盲 "
+"Mandraken Ohjauskeskus, valitse \"Laitteisto\" ja sitten \"Tulostin\"."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Pit盲盲 ensin luoda /etc/dhcpd.conf!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Aseta salasanojen historian pituus est盲盲ksesi salasanojen k盲ytt盲mist盲 "
+"uudelleen."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Jotain meni pieleen! - Onko mkisofs asennettu?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Nyt voit k盲ytt盲盲 xavtv:a (X-ikkunointij盲rjestelm盲ss盲si!) !\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO-kuva on %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Sivutustilaa ei ole riitt盲v盲sti, suurenna sit盲"
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Ei levykeasemaa k盲ytett盲viss盲!"
+msgid "%s on %s"
+msgstr "%s kohteessa %s"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "Voit poistaa levykkeen nyt"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux m盲盲ritt盲盲 ajan GMT (Greenwich Mean Time) -tilassa ja k盲盲nt盲盲 "
+"siit盲\n"
+"paikalliseen aikaan valitsemasi aikavy枚hykkeen mukaisesti. Voit my枚s "
+"muuttaa\n"
+"t盲m盲n k盲yt盲nn枚n poistamalla valinnan \"%s\"\n"
+"jolloin laitteistokello on sama kuin j盲rjestelm盲kello. T盲m盲 on hy枚dyllist盲 "
+"jos\n"
+"koneessa on toinen k盲ytt枚j盲rjestelm盲, esimerkiksi Windows.\n"
+"\n"
+"Optio \"%s\" s盲盲t盲盲 j盲rjestelm盲si kellon\n"
+"automaattisesti oikeaan aikaan yhdist盲m盲ll盲 johonkin Internetin "
+"aikapalvelimeen.\n"
+"Valitse listasta palvelin joka on l盲hell盲si tai kirjoita sen osoite suoraan "
+"kentt盲盲n.\n"
+"Sinulla pit盲盲 tietysti olla toimiva Internet-yhteys jotta t盲m盲 ominaisuus "
+"toimisi.\n"
+"T盲m盲 my枚s asentaa aikapalvelimen koneeseesi jota muut paikallisverkkosi\n"
+"koneet voivat k盲ytt盲盲."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "En voinut k盲ytt盲盲 levykett盲!"
+msgid "Which is your timezone?"
+msgstr "Mik盲 on j盲rjestelm盲si aikavy枚hyke?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Aseta levyke asemaan:"
+msgid "Guinea"
+msgstr "Guinea"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "Kirjoita asetukset"
+msgid "The system is now connected to the Internet."
+msgstr "J盲rjestelm盲 on nyt yhdistetty Internetiin."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Dynaaminen IP-osoiteavaruus:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Etel盲 Georgia ja Etel盲iset Sandwichsaaret"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Suurin osa n盲ist盲 arvoista otettiin\n"
-"suoraan k盲yt枚ss盲 olevassa j盲rjestelm盲st盲si.\n"
-"Voit muokata niit盲 tarvittaessa."
+msgid "Japan (broadcast)"
+msgstr "Japani (bcast)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd palvelinasetukset"
+msgid "Mozambique"
+msgstr "Mosambik"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "IP-alueen loppu:"
+msgid "Icon"
+msgstr "Kuvake"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "IP-alueen alku:"
+msgid "Please choose what you want to backup"
+msgstr "Valitse mit盲 haluat varmuuskopioida"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Nimipalvelimet:"
+msgid "256 colors (8 bits)"
+msgstr "256 v盲ri盲 (8 bitti盲)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Verkkoalueen nimi:"
+msgid "Read-write"
+msgstr "Luku-kirjoitus"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "L盲hetysosoite:"
+msgid "Size: %s\n"
+msgstr "Koko: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Aliverkon peite:"
+msgid "Hostname: "
+msgstr "Koneen nimi:"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Reitittimet:"
+msgid "Chunk size %s\n"
+msgstr "Palan koko %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Verkkopeite:"
+msgid "Build the future of Linux!"
+msgstr "Rakenna Linuxin tulevaisuutta!"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Aliverkko:"
+msgid "Local Printer"
+msgstr "Paikallinen tulostin"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"N盲yt枚nhallinta pit盲盲 k盲ynnist盲盲 uudelleen jotta muutokset tulisivat "
-"voimaan.\n"
-"(kirjoita 'service dm restart' - konsolissa)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd:n asetus..."
+" Copyright (C) 2001-2002 MandrakeSoft.\n"
+" Tekij盲: DUPONT Sebastien <dupont_s\\@epita.fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Poista asiakas"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Muokkaa asiakasta"
+msgid "ADSL connection"
+msgstr "ADSL-yhteys"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Lis盲盲 asiakas -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Ei asetettu, valitse Velho tai Edistynyt.\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Salli kevyet asiakkaat"
+msgid "Error!"
+msgstr "Virhe!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Kevyt asiakas"
+msgid "cable connection detected"
+msgstr "Kaapeliyhteys havaittu"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Yht盲k盲盲n verkkok盲ynnistyskuvaa ei ole luotu!"
+msgid "Permission denied transferring %s to %s"
+msgstr "Oikeudet ev盲tty siirrett盲ess盲 %s kohteeseen %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "tyyppi: %s"
+msgid "/_Report Bug"
+msgstr "/_Raportoi virheest盲"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Poista k盲ytt盲j盲"
+msgid "Resize"
+msgstr "Uusi koko"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Lis盲盲 k盲ytt盲j盲 -->"
+msgid "Dominica"
+msgstr "Dominica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Osoittaa ett盲 salasana j盲rjestelm盲n tietokannassa on eri kuin\n"
-"P盲盲tePalvelimen tietokannassa oleva.\n"
-"Poista ja lis盲盲 k盲ytt盲j盲 uudestaan P盲盲tePalvelimeen mahdollistaaksesi\n"
-"sis盲盲nkirjoittautuminen."
+msgid "Please enter the device name to use for backup"
+msgstr "Sy枚t盲 varmuuskopioinnissa k盲ytett盲v盲n laitteen nimi"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Poista kaikki NBI:t"
+msgid "Resolution: %s\n"
+msgstr "N盲ytt枚tila: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Poista"
+msgid "matching"
+msgstr "t盲sm盲盲"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "T盲m盲 kest盲盲 joitakin minuutteja."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"En pysty k盲ytt盲m盲盲n ytimen moduuleja jotka vastaa ydint盲si (tiedosto %s "
+"puuttuu), t盲m盲 yleens盲 tarkoittaa ett盲 k盲ynnistyslevykett盲si ei ole "
+"tahdistettu asennusmedian kanssa (luo uudempi k盲ynnistyslevyke)."
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "K盲盲nn盲 kaikki ytimet -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Valitse oikea portti. Esimerkiksi \"COM1\" portti Windowsissa\n"
+"on nimetty \"ttyS0\":ksi GNU/Linuxissa."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Verkkokorttia ei valittu!"
+msgid "The following packages are going to be removed"
+msgstr "Seuraavat paketit poistetaan"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "K盲盲nn盲 yksi verkkokortti -->"
+msgid "Connect to the Internet"
+msgstr "Yhdist盲 Internetiin"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Ydint盲 ei valittu!"
+msgid "Use existing partitions"
+msgstr "K盲yt盲 olemassa olevia osioita"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "K盲盲nn盲 koko ydin -->"
+msgid "Canadian (Quebec)"
+msgstr "Kanada (Quebec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "K盲ynnistys-ISO"
+msgid "Mouse device: %s\n"
+msgstr "Hiiren laite: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "K盲ynnistyslevyke"
+msgid "Reselect correct fonts"
+msgstr "Valitse uudelleen oikeat kirjasimet"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
+"Options Description:\n"
"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"drakTermServ Yleiskuva\n"
-"\t\t\t \n"
-" - Luo Etherboot:a tukevia k盲ynnistyskuvia:\n"
-" \t\tYtimen k盲ynnist盲miseksi etherboot:in kautta pit盲盲 luoda "
-"erityinen kernel/initrdrd kuva\n"
-" \t\tmkinitrd-net tekee suuren osan t盲st盲 ty枚st盲 ja drakTermServ on "
-"ainoastaan graafinen k盲ytt枚liittym盲\n"
-" \t\tn盲iden kuvien hallintaan/r盲盲t盲l枚intiin.\n"
-"\n"
-" - Yll盲pid盲 /etc/dhcpd.conf:\n"
-" \t\tVerkkok盲ynnistyst盲 k盲ytt盲v盲t asiakkaat tarvitsevat oman dhcpd."
-"conf tietueen, joka m盲盲r盲盲 IP-osoitteen\n"
-" \t\tja verkkok盲ynnistyskuvan kyseiselle koneelle. drakTermServ "
-"auttaa n盲iden tietueiden luomisessa/poistamisessa.\n"
-"\t\t\t\n"
-" \t\t(PCI-kortit voivat j盲tt盲盲 kuvan asettamatta - etherboot pyyt盲盲 "
-"oikean kuvan. Sinun kannattaisi\n"
-" \t\tmy枚s harkita sit盲 ett盲 kun etherboot etsii kuvia, se odottaa "
-"nimi盲 kuten\n"
-" \t\tboot-3c59x.nbi, boot-3c59x.2.4.19-16mdk.nbi sijasta).\n"
-"\t\t\t \n"
-" \t\tTyypillinen dhcpd.conf tietue levytt枚m盲lle asiakkaalle voi "
-"olla:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tVaikka voit k盲ytt盲盲 IP-osoiteryhm盲盲 asiakaskoneelle r盲盲t盲l枚idyn "
-"tietueen sijasta,\n"
-"\t\t\tkiinteiden osoitteiden m盲盲ritysten k盲ytt枚盲 helpottaa ClusterNFS:n "
-"tarjoama\n"
-"\t\t\tasiakaskohtaisten asetustiedostojen k盲ytt枚.\n"
-"\t\t\t\n"
-"\t\t\tHuomaa: \"#type\" tietue on ainoastaan drakTermServ:n k盲yt枚ss盲. "
-"Asiakkaat voivat olla joko \"thin\"\n"
-"\t\t\ttai 'fat'. 'Thin' asiakkaat suorittavat suurimman osan ohjelmista "
-"palvelimella xdmcp kautta, kun 'fat' asiakkaat suorittavat\n"
-"\t\t\tsuurimman osan ohjelmista itse. Erikoinen inittab-tiedosto, /etc/"
-"inittab\\$\\$IP=client_ip\\$\\$ on\n"
-"\t\t\tluotu 'thin' asiakkaille. J盲rjestelm盲n asetustiedostot xdm-config, "
-"kdmrc ja gdm.conf muokataan\n"
-"\t\t\txdmcp:n k盲ytt盲miseksi, jos 'thin' asiakkaita k盲ytet盲盲n. Koska xdmcp:n "
-"k盲yt枚ss盲 on turvallisuusongelmia,\n"
-"\t\t\thosts.deny ja hosts.allow muokataan k盲yt枚n rajoittamiseen "
-"paikalliverkon aliverkolle.\n"
-"\t\t\t\n"
-"\t\t\tHuomaa: Sinun pit盲盲 pys盲ytt盲盲/k盲ynnist盲盲 palvelin asiakkaiden "
-"lis盲盲misen/muokkauksen j盲lkeen.\n"
-"\t\t\t\n"
-" - Yll盲pid盲 /etc/exports:\n"
-" \t\tClusternfs sallii juuritiedostoj盲rjestelm盲n jakoa levytt枚mille "
-"asiakkaille. drakTermServ\n"
-" \t\tasettaa oikean tietueen anonyymik盲yt枚n sallimiseksi "
-"juuritiedostoj盲rjestelm盲lle\n"
-" \t\tlevytt枚milt盲 asiakkailta.\n"
-"\n"
-" \t\tTyypillinen exports tietue clusternfs:ille:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home ALIVERKKO/MASKI(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tMiss盲 ALIVERKKO/MASKI vastaa verkkosi.\n"
-" \t\t\n"
-" - Yll盲pid盲 /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tJotta levytt枚mien asiakkaiden k盲ytt盲j盲t pystyv盲t kirjautumaan "
-"t盲h盲n j盲rjestelm盲盲n, niiden tietue\n"
-" \t\t/etc/shadow tiedostossa pit盲盲 kopioida /etc/shadow\\$\\$CLIENTS\\"
-"$\\$. drakTermServ auttaa\n"
-" \t\tt盲ss盲 toimenpiteess盲 lis盲盲m盲ll盲 tai poistamalla k盲ytt盲ji盲 t盲st盲 "
-"tiedostosta.\n"
-"\n"
-" - Asiakaskohtainen /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tClusternfs:盲n kautta jokaisella levytt枚m盲ll盲 asiakkaalla voi "
-"olla oma r盲盲t盲l枚ity asetustiedosto\n"
-" \t\tpalvelimen juuritiedostoj盲rjestelm盲ss盲. Tulevaisuudessa "
-"drakTermServ auttaa n盲iden tiedostojen\n"
-" \t\tluonnissa.\n"
-"\n"
-" - Asiakaskohtaiset j盲rjestelm盲n asetustiedostot:\n"
-" \t\tClusternfs:盲n kautta, jokaisella levytt枚m盲ll盲 asiakkaalla voi "
-"olla omat r盲盲t盲l枚ityt asetustiedostot\n"
-" \t\tpalvelimen juuritiedostoj盲rjestelm盲ss盲. Tulevaisuudessa "
-"drakTermServ auttaa n盲iden tiedostojen\n"
-" \t\tluonnissa,\n"
-" \t\tkuten /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard asiakaskohtaisena\n"
-" \t\ttiedostoina.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ asettaa t盲m盲n tiedoston toimimaan yhteisty枚ss盲 "
-"mkinitrd-net:ll盲 luotujen\n"
-" \t\tkuvien kanssa ja tietueet /etc/dhcpd.conf tiedostossa jakamaan "
-"k盲ynnistysluvan jokaiselle levytt枚m盲lle\n"
-" \t\tasiakkaalle.\n"
-"\n"
-" \t\tTyypillinen tftp asetustiedosto n盲ytt盲盲 t盲lt盲:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tMuutokset t盲盲ll盲 verrattuna vakioasennukseen on 'disable' lipun "
-"asettaminen\n"
-" \t\t'no' tilaan ja hakemiston muuttaminen /var/lib/tftpboot, johon "
-"mkinitrd-net\n"
-" \t\ttallentaa kuvat.\n"
+"optioiden kuvaus:\n"
"\n"
-" - Luo etherboot levykkeet/CD:t:\n"
-" \t\tLevytt枚m盲t asiakaskoneet tarvitsevat joko ROM-kuvat "
-"verkkokortissa, tai k盲ynnistyslevykkeen\n"
-" \t\ttai CD:n k盲ynnist盲m盲盲n k盲ynnistysjakson. drakTermServ auttaa "
-"n盲iden kuvien luonnissa,\n"
-" \t\tjotka perustuvat asiakaskoneiden verkkokorttiin.\n"
-" \t\t\n"
-" \t\tPerusesimerkki k盲ynnistyslevykkeen luominen 3Com 3c509 "
-"verkkokortille:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/"
-"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Ole varovainen kun k盲yt盲t FTP-varmistusta, koska ainoastaan\n"
+"valmiiksi 'rakennetut' varmistukset l盲hetet盲盲n palvelimelle.\n"
+"Joten t盲ll盲 hetkell盲 sinun t盲ytyy 'rakentaa' varmistukset \n"
+"kovalevyll盲si ennen kuin l盲het盲t niit盲 palvelimelle.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Optiot\n"
"\n"
-"\n"
-" Kiitokset:\n"
-"\t- LTSP Projekti http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" T盲盲ll盲 voit valita haluatko koneesi k盲ynnistyv盲n suoraan graafiseen\n"
+"k盲ytt枚liittym盲盲n. Huomaa, ett盲 kysymys esitet盲盲n vaikka et olisi\n"
+"testannut asetuksia. Haluat varmaankin vastata \"%s\", jos koneesi\n"
+"on tarkoitettu palvelimeksi tai jos n盲yt枚n asetus ep盲onnistui."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C)2002 MandrakeSoft.\n"
-"\tStew Benedict <sbenedict\\@mandrakesoft.com>\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Asetamme seuraavaksi %s-yhteyden."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Lis盲盲/Poista asiakkaita"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Lis盲盲/Poista k盲ytt盲ji盲"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] n盲ytt枚\n"
+" XFdrake tarkkuus"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Tulostimen automaattinen tunnistus"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "kirjasimia ei l枚ytynyt.\n"
+
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Verkkok盲ynnistyksen kuvat"
+msgid "Language"
+msgstr "Valitse kieli"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot levyke/ISO"
+msgid "Printer model selection"
+msgstr "Tulostimen mallin valinta"
-#: ../../standalone/drakTermServ:1
+# mat
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Pys盲yt盲 palvelin"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "Vaihdettuasi osion %s tyyppi盲 kaikki siin盲 olevat tiedot h盲vi盲v盲t"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "K盲ynnist盲 palvelin"
+msgid "%d seconds"
+msgstr "%d sekuntia"
-#: ../../standalone/drakTermServ:1
+# mat
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "Poista palvelin k盲yt枚st盲"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Aseta tyhj盲 levyke levykeasemaan %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Ota palvelin k盲ytt枚枚n"
+msgid "A valid URI must be entered!"
+msgstr "Sinun pit盲盲 sy枚tt盲盲 oikeanmuotoinen URI!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Mandrake Terminal Server Asetus"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "L枚ysin \"%s\" liit盲nn盲n, haluatko k盲ytt盲盲 sit盲?"
-# mat
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Poista viimeinen alkio"
+msgid "Re-configure interface and DHCP server"
+msgstr "Aseta liit盲nt盲 ja DHCP-palvelin uudelleen"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Lis盲盲 alkio"
+msgid "Sound configuration"
+msgstr "脛盲niasetukset"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Automaattinen asennus"
+msgid "Photo test page"
+msgstr "Valokuva testisivu"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Levykkeen luominen onnistui.\n"
-"Voit nyt toistaa asennuksesi."
+msgid "Custom disk partitioning"
+msgstr "Mukautettu levyn osiointi"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "Onnittelut!"
+msgid "Enter Printer Name and Comments"
+msgstr "Kirjoita tulostimen nimi ja kuvaus"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Seuraavat tulostimet:\n"
"\n"
-"Tervetuloa.\n"
-"\n"
-"Automaattisen asennuksen parametrit l枚ytyv盲t vasemmalla olevista lohkoista"
+"%s%s\n"
+"on kytketty suoraan koneeseesi"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Valmistelen automaattisen asennuksen levykett盲"
+msgid "type: %s"
+msgstr "tyyppi: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "manuaalinen"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovakia (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Valitse jokaiselle vaiheelle toistetaanko asennus samalla tapaa kuin nyt vai "
-"onko kyseinen vaihe manuaalinen"
+msgid "No Sound Card detected!"
+msgstr "脛盲nikorttia ei l枚ydetty!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automaattisten vaiheiden asetus"
+msgid "Mouse Port"
+msgstr "Hiiren portti"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "toista"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"N盲yt枚nhallinta pit盲盲 k盲ynnist盲盲 uudelleen jotta muutokset tulisivat "
+"voimaan.\n"
+"(kirjoita 'service dm restart' - konsolissa)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "FTP palvelin"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Olet asettamassa Automaattisen asennuksen levykett盲. T盲m盲 toiminto on aika "
-"vaarallinen ja sit盲 pit盲盲 k盲ytt盲盲 harkiten.\n"
-"\n"
-"T盲ll盲 ominaisuudella voit toistaa samanlaisen asennuksen jonka olet "
-"suorittanut t盲ss盲 koneessa, ja interaktiivinen asennus antaa sinun muuttaa "
-"ainoastaan paria kohtaa asennuksen aikana.\n"
-"\n"
-"Turvallisuuden maksimoimiseksi osiointia ja formatointia ei koskaan "
-"suoriteta automaattisesti, riippumatta siit盲 mit盲 valitsit t盲m盲n koneen "
-"asennuksen aikana.\n"
+"Parametrit: (arg)\n"
"\n"
-"Haluatko jatkaa?"
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 msec turvallisuustarkistukset joka tunti."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Automaattisen asennuksen muokkaaja"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "pfm kirjasinten muunnos"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Tarvittavaa kuvatiedostoa `%s' ei l枚ytynyt."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "V盲yl盲tyyppi johon hiiri on liitetty"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Virhe!"
+msgid "Uganda"
+msgstr "Uganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Parametrit: (size)\n"
"\n"
-"Varmistuksen palautusongelmia:\n"
-"\n"
-"Palautusvaiheen aikana Drakbackup tarkistaa kaikki\n"
-"varmistustiedostosi ennen niiden palauttamista.\n"
-"Ennen palauttamista Drakbackup poistaa alkuper盲iset\n"
-"hakemistosi ja menet盲t kaikki nykyiset datasi. On t盲rke盲盲\n"
-"olla varovainen eik盲 muokata varmistustiedostoja k盲sin.\n"
+"Asettaa komentotulkin historian koon. Arvo -1 tarkoittaa rajoittamatonta."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"optioiden kuvaus:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Ole varovainen kun k盲yt盲t FTP-varmistusta, koska ainoastaan\n"
-"valmiiksi 'rakennetut' varmistukset l盲hetet盲盲n palvelimelle.\n"
-"Joten t盲ll盲 hetkell盲 sinun t盲ytyy 'rakentaa' varmistukset \n"
-"kovalevyll盲si ennen kuin l盲het盲t niit盲 palvelimelle.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Kuvaus:\n"
+"T盲ss盲 DrakX n盲ytt盲盲 yhteenvedon laitteistoasi koskevista tiedoista\n"
+"jotka se on ker盲nnyt. Asennetusta laitteistosta riippuen, n盲et joitakin\n"
+"tai kaikki seuraavista tietueista. Jokainen tietue koostuu asetettavasta\n"
+"laitteesta ja lyhyest盲 selostuksesta laitteen asetuksien nykytilasta.\n"
+"Paina tietuetta vastaavaa \"%s\" painiketta jos haluat muuttaa sit盲.\n"
"\n"
-" Drakbackup:a k盲ytet盲盲n j盲rjestelm盲si varmistamiseen.\n"
-" Asetuksen aikana voit valita: \n"
-"\t- J盲rjestelm盲tiedostoja, \n"
-"\t- K盲ytt盲jien tiedostoja, \n"
-"\t- Muita tiedostoja,\n"
-"\ttai Koko j盲rjestelm盲si... ja Muut (esim. Windows-osiot)\n"
+" * \"%s\": tarkista n盲pp盲inasettelu ja vaihda sit盲\n"
+"tarvittaessa;\n"
"\n"
-" Drakbackup sallii varmistaminen seuraaviin kohteisiin:\n"
-"\t- Kovalevy.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (sis盲lt盲盲 automaattik盲ynnistyksen,\n"
-"\t pelastuksen ja automaattiasennuksen.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Nauha.\n"
+" * \"%s\": tarkista maa-asetukset. Jos et ole maassa, joka on valittu,\n"
+"paina \"%s\" painiketta ja valitse oikea. Jos maasi ei ole\n"
+"listassa, paina \"%s\" painiketta jolloin n盲et listan kaikista maista.\n"
"\n"
-" Drakbackup sallii sinun palauttaa j盲rjestelm盲si\n"
-" haluamasi hakemistoon.\n"
+" * \"%s\": DrakX oletuksena arvioi aikavy枚hykkeesi riippuen\n"
+"siit盲, mink盲 kielen olet valinnut. Jos t盲m盲 ei ole oikea, voit muuttaa sit盲\n"
+"painamalla \"%s\".\n"
"\n"
-" Oletuksena kaikki varmistukset tallennetaan\n"
-" /var/lib/drakbackup hakemistoon\n"
+" * \"%s\": tarkista nykyiset hiiriasetukset ja muuta niit盲 tarvittaessa.\n"
"\n"
-" Asetustiedosto:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": painamalla \"%s\"-painiketta avaat tulostuksen\n"
+"asetusvelhon. Lue lis盲盲 asiaa koskevasta luvusta ``Aloitusoppaasta''\n"
+"saadaksesi lis盲tietoa miten asettaa uusi tulostin. K盲ytt枚liittym盲\n"
+"joka oppaassa esitet盲盲n on vastaava kuin se jota k盲ytet盲盲n asennuksen\n"
+"aikana.\n"
"\n"
-"Palautusaskel:\n"
-" \n"
-" Palautusvaiheen aikana Drakbackup poistaa alkuper盲iset\n"
-" hakemistosi, ja tarkistaa etteiv盲t varmistustiedostosi ole\n"
-" korruptoituneet. On suositeltavaa ett盲 suoritat viimeisen\n"
-" varmistuksen ennen palautuksen tekoa.\n"
+" * \"%s\": jos 盲盲nikortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
+"n盲ytet盲盲n t盲盲ll盲. Jos huomaat ett盲 n盲ytetty 盲盲nikortti ei vastaa sit盲\n"
+"joka on asennettu koneeseesi, voit nappia painamalla valita toisen\n"
+"ajurin.\n"
+"\n"
+" * \"%s\": oletuksena DrakX asettaa graafisen\n"
+"k盲ytt枚liittym盲si k盲ytt盲m盲盲n \"800x600\" tai \"1024x768\" n盲ytt枚tilaa.\n"
+"Jos t盲m盲 ei sovi sinulle, paina \"%s\" muuttaaksesi asetuksia.\n"
+"\n"
+" * \"%s\": jos TV-kortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
+"n盲ytet盲盲n t盲盲ll盲. Jos sinulla on TV-kortti ja sit盲 ei ole tunnistettu,\n"
+"voit painaa \"%s\" ja yritt盲盲 asettaa sen itse.\n"
+"\n"
+" * \"%s\": jos ISDN-kortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
+"n盲ytet盲盲n t盲盲ll盲. Voit painaa \"%s\" jos sinulla on tarvetta\n"
+"muuttaa kortin asetuksia.\n"
+"\n"
+" * \"%s\": jos haluat asettaa Internet- tai paikallisverkkoasetuksesi nyt.\n"
"\n"
+" * \"%s\": t盲ss盲 voit muuttaa asennuksen alussa asettamaasi\n"
+"turvatasoa jos haluat.\n"
"\n"
+" * \"%s\": Jos aiot yhdist盲盲 koneesi Internetiin, kannattaa\n"
+"suojautua verkon vaaroilta asettamalla palomuuri. Katso ``Aloitus-\n"
+"oppaasta'' t盲t盲 aihetta vastaavaa lukua saadaksesi lis盲tietoa\n"
+"palomuurin asetuksista.\n"
+"\n"
+" * \"%s\": jos haluat muuttaa k盲ynnistyslataajasi asetuksia,\n"
+"paina vastaavaa nappia. T盲t盲 ei kannata muuttaa jos et ole asiantuntija.\n"
+"\n"
+" * \"%s\": t盲盲ll盲 voit m盲盲ritt盲盲 mit盲 palveluja j盲rjestelm盲ss盲si\n"
+"toimii. Jos aiot k盲ytt盲盲 t盲t盲 konetta palvelimena, kannattaa n盲m盲\n"
+"asetukset tarkistaa."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Komorit"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" P盲ivitykset 2002 MandrakeSoft\n"
-" Tekij盲: Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"Asetamme seuraavaksi %s-yhteyden.\n"
+"\n"
+"\n"
+"Paina OK jatkaaksesi."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Yaboot-tila"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "Yhdysvallat (kaapeli)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft.\n"
-" Tekij盲: DUPONT Sebastien <dupont_s\\@epita.fr>"
+"En voi suorittaa LiLoa uudelleen!\n"
+"Suorita \"LILO\" p盲盲k盲ytt盲j盲n盲 komentorivill盲 \n"
+"LILO teeman asennuksen viimeistelyyn."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Yleinen 3-n盲pp盲inen hiiri"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Valitse toinen media, josta palauttaa"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Ohjelmiston hallinta"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14629,17 +13995,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"palautuksen kuvaus:\n"
@@ -14665,5065 +14033,5748 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"optioiden kuvaus:\n"
-"\n"
-" - Varmista j盲rjestelm盲tiedostoja:\n"
-"\n"
-"\tT盲m盲 optio sallii sinun varmistamaan /etc hakemistosi,\n"
-"\tjoka sis盲lt盲盲 kaikki asetustiedostot. Ole varovainen\n"
-"\tpalautuksen aikana ettei seuraavia tiedostoja ylikirjoiteta:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Varmista k盲ytt盲jien tiedostot:\n"
-"\n"
-"\tT盲m盲 optio sallii sinun valitsemaan kaikki k盲ytt盲j盲t\n"
-"\tjoiden tiedostoja haluat varmistaa.\n"
-"\tS盲盲st盲盲ksesi levytilaa, ehdotamme ettet sis盲ll盲\n"
-"\tnettiselaimen v盲limuistitiedostoja.\n"
-"\n"
-" - Varmista muita tiedostoja:\n"
-"\n"
-"\tT盲m盲 optio sallii sinua lis盲t盲 varmistettavaa tietoa.\n"
-"\tT盲t盲 optiota et voi t盲ll盲 hetkell盲 k盲ytt盲盲 asteittaisen \n"
-"\tvarmistuksen kanssa.\n"
-"\n"
-" - Asteittaiset varmistukset:\n"
-"\n"
-"\tAsteittainen varmistus on tehokkain tapa varmistaa.\n"
-"\tT盲m盲 optio sallii sinua varmistaa ensin kaikki tietosi,\n"
-"\tsen j盲lkeen ainoastaan muuttuneet tiedostot.\n"
-"\tT盲ll盲 tavalla voit palauttaa tiedot haluamasi p盲iv盲m盲盲r盲n\n"
-"\tmukaan.\n"
-"\tJos et valitse t盲t盲 optiota kaikki vanhat varmistukset\n"
-"\tpoistetaan ennen uuden tekoa. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Jotkut virheet sendmailin aikana johtuvat huonoista \n"
-"postfix-asetuksista. Korjataksesi vian sinun t盲ytyy asettaa \n"
-"myhostname tai mydomain /etc/postfix/main.cf tiedostossa.\n"
-"\n"
+msgid "Re-submit"
+msgstr "L盲het盲 uudelleen"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"optioiden kuvaus:\n"
-"\n"
-"T盲ss盲 vaiheessa Drakbackup sallii sinua muuttaa:\n"
-"\n"
-" - Pakkaustapaa:\n"
-"\n"
-" Jos valitset bzip2-pakkauksen, tietosi pakataan\n"
-" paremmin kuin gzip:ill盲 (noin 2-10%%).\n"
-" T盲m盲 optio ei ole valittu oletuksena, koska se\n"
-" vie enemm盲n aikaa ( noin 1000%% enemm盲n).\n"
-"\n"
-" - P盲ivitys-tila:\n"
-"\n"
-" t盲m盲 optio p盲ivitt盲盲 varmistuksesi, mutta t盲m盲 ei\n"
-" oikeastaan ole hyv盲 vaihtoehto, koska sinun tarvitsee\n"
-" purkaa varmistuksesi ennen kuin voit p盲ivitt盲盲 sen.\n"
-"\n"
-" - .backupignore (varmista-ohita) tila:\n"
-"\n"
-" Niin kuin cvs, Drakbackup ohittaa kaikki viitteet jotka\n"
-" ovat sis盲llettyn盲 .backupignore tiedostoissa jokaisessa\n"
-" hakemistossa. Esim.:\n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "CD on asetettu - jatka."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "kt"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Palauta"
+msgid "Network & Internet"
+msgstr "Verkko & Internet"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Varmuuskopioi heti"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Liettua \"foneettinen\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Lis盲asetukset"
+msgid "Net Boot Images"
+msgstr "Verkkok盲ynnistyksen kuvat"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Velhon asettaminen"
+msgid "Sharing of local scanners"
+msgstr "Paikallisten kuvanlukijoiden jakaminen"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "N盲yt盲 varmuuskopioinnin asetukset."
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
+"Kytke ja K盲yt盲 -tunnistus ep盲onnistui. Ole hyv盲 ja valitse oikea n盲ytt枚"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Tee heti asetustiedoston varmuuskopio"
+msgid "Services and deamons"
+msgstr "Palvelut ja demonit"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup-asetukset"
+msgid "Remote host name missing!"
+msgstr "Et盲palvelimen verkkonimi puuttuu!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "Kokonaisedistyminen"
+msgid "with /usr"
+msgstr "erillinen '/usr' osio"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "L盲het盲n tiedostoja..."
+msgid "Network"
+msgstr "Verkko"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "tiedostoja l盲hetet盲盲n FTP:n yli"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "Tunnista automaattisesti Windows-koneisiin liitetyt tulostimet"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Varmuuskopioi muut tiedostot"
+msgid "This password is too simple"
+msgstr "Salasana on liian yksinkertainen"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Varmuuskopioi k盲ytt盲j盲tiedostot"
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovakia (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Varmuuskopioi j盲rjestelm盲tiedostot"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Ohjelmien luomiseen ja muokkaamiseen eri kieliss盲 kuten Perl, Python, C ja C+"
+"+ eiv盲t ole ollut niin helppoa kiitos GNU gcc 3 ja parhaat Avoimen "
+"L盲hdekoodin kehitysymp盲rist枚t."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "Kehityksen alla ... odota."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "V盲himm盲isasennus (erityisesti ei urpmia)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"Asetustiedostoa ei l枚ytynyt\n"
-"valitse joko Velho tai Kehittynyt."
+" Siirr盲 \n"
+"Nyt"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Valitse varmuuskopioitava tieto..."
+msgid "Use daemon"
+msgstr "K盲yt盲 demonia"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Valitse varmuuskopioinnissa k盲ytett盲v盲 media..."
+msgid "Authentication"
+msgstr "Tunnistustapa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Valitse palautettava tieto..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Lis盲盲 t盲m盲 tulostin Star Office/OpenOffice.org/GIMP k盲ytt枚枚n."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Seuraavat paketit pit盲盲 asentaa:\n"
+msgid "Additional CUPS servers: "
+msgstr "Muut CUPS-palvelimet:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Virhe tiedoston l盲hetyksess盲 k盲ytt盲en FTP:t盲.\n"
-"Ole hyv盲 ja korjaa FTP-asetuksesi."
+"Valitse yksi automaattitunnistetuista tulostimista listalta, tai sy枚t盲 "
+"verkkonimi tai IP-osoite ja tarvittaessa porttinumero (oletus: 9100) "
+"sy枚tt枚kenttiin."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "Minne haluat liitt盲盲 laitteen %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Palauta verkon kautta"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Algeria"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd:n koko"
+
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Virhe sendmail:in aikana.\n"
-" Raporttiviesti盲si ei l盲hetetty.\n"
-" Ole hyv盲 ja aseta sendmail"
+"Mik盲li tarjolla on eri palvelimia ohjaimellesi, 3D tuella tai ilman,\n"
+"sinua pyydet盲盲n valitsemaan palvelin joka parhaiten vastaa tarpeitasi."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Seuraava"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tVarmuuskopiot k盲ytt盲v盲t: tar ja gzip\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "Edellinen"
+msgid "2 MB"
+msgstr "2 Mt"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Tallenna"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTIO]...\n"
+" --no-confirmation 盲l盲 pyyd盲 varmistusta MandrakeUpdate tilassa.\n"
+" --no-verify-rpm 盲l盲 tarkista pakettien allekirjoitusta\n"
+" --changelog-first n盲yt盲 muutosloki ennen tiedostolistausta "
+"kuvausikkunassa\n"
+" --merge-all-rpmnew ehdota kaikkien .rpmnew/.rpmsave tiedostojen "
+"yhdist盲mist盲"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Tee varmuuskopio"
+msgid "Setting Default Printer..."
+msgstr "Asetetaan oletustulostinta..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Palautuksen edistyminen"
+msgid "Interface %s (using module %s)"
+msgstr "Liit盲nt盲 %s (k盲ytt盲en moduulia %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Palauta luettelosta"
+msgid "Name: %s\n"
+msgstr "Nimi: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Selaa uuteen palautus s盲ilytykseen."
+msgid "Generating preview ..."
+msgstr "Luodaan esikatselu ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "CD on asetettu - jatka."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Taajuuden pit盲isi loppua p盲盲tteeseen k, M tai G (esim. \"2.46G\" jos "
+"taajuus\n"
+"on 2.46 GHz) tai sinun pit盲盲 lis盲t盲 riitt盲v盲sti '0' (nollia) loppuun."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Mukautettu palautus"
+msgid "serial"
+msgstr "sarja"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Palauta kaikki varmuuskopiot"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "Palautus ep盲onnistui..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgia (\"Latin\"-j盲rjestys)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Tiedostot palautettu..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
+"Saa parhaat tuotteet Mandrake Linuxin strategisilta yhteisty枚kumppaneilta"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Hakemisto tai moduuli vaaditaan"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Voit nyt m盲盲ritt盲盲 moduulin %s optiot.\n"
+"Huomaa ett盲 osoite t盲ytyy m盲盲ritt盲盲 '0x' etuliitteell盲, esim. 0x123."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Koneen nimi vaaditaan"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 tarjoaa sinulle Mandraken Ohjauskeskus, joka on tehokas "
+"ty枚kalu sopeuttamaan tietokoneesi vastaamaan tarpeitasi. Aseta ja r盲盲t盲l枚i "
+"osat kuten turvataso, laitteisto (n盲ytt枚, hiiri, n盲pp盲imist枚...), "
+"Internetyhteytesi ja paljon muuta!"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "K盲ytt盲j盲tunnus vaaditaan"
+msgid "Kenya"
+msgstr "Kenia"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Salasana vaaditaan"
+msgid "Use ``Unmount'' first"
+msgstr "K盲yt盲 ensin komentoa ``Irrota''"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Koneen polku tai moduuli"
+msgid "Installing mtools packages..."
+msgstr "Asennan mtools paketteja..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Koneen nimi"
+msgid "You must specify a root partition"
+msgstr "Sinun t盲ytyy m盲盲ritell盲 juuriosio"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Palauta verkon kautta protokollalla: %s"
+msgid "first step creation"
+msgstr "ensiaskeleen luominen"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Palauta verkon kautta"
+msgid "Both Shift keys simultaneously"
+msgstr "Molemmat Shift n盲pp盲imet samanaikaisesti"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ei oikein nimetty nauha. Nauhan nimike on: %s."
+msgid "Select a scanner model"
+msgstr "Valitse kuvanlukijan malli"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Aseta nauha nimell盲 %s\n"
-" nauha-asemaan %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR uusi sukupolvi"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Palauta nauhalta"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup-asetukset"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ei oikein nimetty CD. CD:n nimike on: %s."
+msgid "Save as.."
+msgstr "Tallenna nimell盲.."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Aseta CD nimell盲: %s\n"
-"cd-asemaan liitospisteess盲 /mnt/cdrom"
+"T盲t盲 liitynt盲盲 ei ole viel盲 asetettu.\n"
+"K盲ynnist盲 p盲盲ikkunasta l枚ytyv盲 asetusvelho"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Palauta CD-levylt盲"
+msgid "Korea (North)"
+msgstr "Korea (Pohjois)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Varmistustiedostoja ei l枚ydetty kohteesta: %s"
+msgid "Autologin"
+msgstr "Automaattinen kirjautuminen"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Muuta\n"
-"palautushakemisto"
+msgid "System configuration"
+msgstr "J盲rjestelm盲n asetus"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Verkkoalueen p盲盲k盲ytt盲j盲n salasana"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Palauta\n"
-"valitut tiedostot"
+"Sopeuta tietokoneesi t盲ydellisesti vastaamaan tarpaitasi k盲ytt盲en Mandrake "
+"Linux tarjoamat 11 k盲ytt枚liittym盲盲 jotka ovat t盲ysin r盲盲t盲l枚it盲viss盲: KDE "
+"3.1, Gnome 2.2, WindowMaker, ..."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Asetetaan tulostinta..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"Palauta valittu\n"
-"luettelotietue"
+"Varmistaakseen tietojen yhten盲isyytt盲 osio(ide)n koon\n"
+"muuttamisen j盲lkeen, suoritetaan tiedostoj盲rjestelm盲n \n"
+"tarkistusta seuraavan kerran kun k盲ynnist盲t Windows(TM)."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Poista k盲ytt盲jien hakemistot ennen palauttamista."
+msgid "MB"
+msgstr "Mt"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Tee uusi varmuuskopio ennen palauttamista (vain kasvavilla varmuuskopioilla)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "jos asetettu, suoritetaan tarkistuksia rpm-tietokannassa."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "valitse polku, johon palautat (juurihakemiston sijaan)"
+msgid "Virgin Islands (British)"
+msgstr "Brittil盲iset Neitsytsaaret"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Palauta muut"
+msgid "Bermuda"
+msgstr "Bermuda"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Palauta k盲ytt盲j盲t"
+msgid "click here if you are sure."
+msgstr "paina t盲h盲n, kun olet varma."
-# Asennuksen sivuvalikko
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Palauta j盲rjestelm盲"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Asetustiedostoa ei l枚ytynyt\n"
+"valitse joko Velho tai Kehittynyt."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Muu media"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"T盲ss盲 on listaus olemassa olevista tunnistetuista Linux-osioista\n"
+"kovalevyll盲si. Voit s盲ilytt盲盲 velhon tekem盲t valinnat, koska ne ovat\n"
+"hyvi盲 useimmille yleisimmille asennuksille. Jos teet muutoksia, sinun\n"
+"pit盲盲 ainakin luoda juuri-osio (\"/\"). 脛l盲 valitse liian pient盲 osiota tai\n"
+"et voi asentaa riitt盲v盲sti ohjelmia. Jos haluat tallentaa tietojasi "
+"erilliselle\n"
+"osiolle, sinun t盲ytyy luoda my枚s \"/home\"-osio (mahdollista vain jos\n"
+"sinulla on enemm盲n kuin yksi Linux-osio k盲ytett盲viss盲).\n"
+"\n"
+"Jokainen osio on listattu seuraavasti: \"Nimi\", \"Koko\".\n"
+"\n"
+"\"Nimi\" rakenne on seuraava: \"kovalevytyyppi\". \"kovalevynumero\", \n"
+"\"osionumero\" (esim. \"hda1\").\n"
+"\n"
+"\"kovalevytyyppi\" on \"hd\" jos kovalevysi on IDE-kovalevy, ja \"sd\" jos\n"
+"se on SCSI kovalevy.\n"
+"\n"
+"\"kovalevynumero\" on aina aakkonen \"hd\":n tai \"sd\":n per盲ss盲.\n"
+"IDE-kovalevyille: \n"
+"\n"
+" * \"a\" tarkoittaa \"is盲nt盲levy ensisijaisella IDE-ohjaimella\";\n"
+"\n"
+" * \"b\" tarkoittaa \"orjalevy ensisijaisella IDE-ohjaimella\";\n"
+"\n"
+" * \"c\" tarkoittaa \"is盲nt盲levy toissijaisella IDE-ohjaimella\";\n"
+"\n"
+" * \"d\" tarkoittaa \"orjalevy toissijaisella IDE-ohjaimella\";\n"
+"\n"
+"SCSI kovalevyill盲, \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" tarkoittaa\n"
+"\"toiseksi pienin SCSI ID\", jne..."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Valitse toinen media, josta palauttaa"
+msgid "Remove"
+msgstr "Poista"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Anna hakemisto, johon varmuuskopiot on tallennettu"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Palauta kiintolevylt盲."
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "K盲yt盲 quotaa varmuuskopiotiedostoille."
+msgid "Pipe job into a command"
+msgstr "Putkita ty枚 k盲skylle"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Sy枚t盲 suurin sallittu koko\n"
-"Drakbackup-varmuuskopiolle"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "uusi dynaaminen laitenimi, luotu ytimen sis盲isen devfs:n toimesta"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Sy枚t盲 hakemisto, johon tallennetaan:"
+msgid "Yes"
+msgstr "Kyll盲"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "K盲yt盲 kiintolevy盲 varmuuskopiointiin"
+msgid "Cote d'Ivoire"
+msgstr "Cote d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Valitse p盲iv盲m盲盲r盲, johon tiedon palauttaminen tehd盲盲n"
+msgid "Which protocol do you want to use?"
+msgstr "Mit盲 protokollaa haluat k盲ytt盲盲?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Tee j盲rjestelm盲tiedostoista varmuuskopio ennen:"
+msgid "Restore Progress"
+msgstr "Palautuksen edistyminen"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Estonia"
+msgstr "Viro"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-"Palautettava k盲ytt盲j盲lista (vain uusin p盲iv盲 kutakin k盲ytt盲j盲盲 kohti on "
-"t盲rke盲)"
+"Valitse kone jolle paikalliset kuvanlukijat pit盲isi asettaa k盲ytett盲viksi:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK palauttaaksesi muut tiedostot."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Sinulla on reik盲 osiotaulussasi eik盲 sit盲 voida k盲ytt盲盲.\n"
+"Ainoa ratkaisu on siirt盲盲 prim盲盲riosioita siten ett盲 reik盲 on ennen "
+"laajennettuja osioita"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Palauta asetukset "
+msgid "Channel"
+msgstr "Kanava"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " onnistuneesti palautettu paikkaan %s "
+msgid "Add"
+msgstr "Lis盲盲"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Kaikki valitsemasi tiedot on "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Internetyhteyden jakamista ei ole koskaan asetettu."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Varmuuskopiot ovat vahingoittuneet"
+msgid " Error while sending mail. \n"
+msgstr "Virhe s盲hk枚postin l盲hetyksess盲. \n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Poista valinta tai poista se seuraavalla kerralla."
+msgid "Keyboard"
+msgstr "N盲pp盲imist枚"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Lista vahingoittuneista tiedoista:\n"
-"\n"
+"Aseta CD nimell盲: %s\n"
+"cd-asemaan liitospisteess盲 /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Lista palautettavista tiedoista:\n"
-"\n"
+"Nopeuden pit盲isi loppua p盲盲tteeseen k, M tai G (esim. \"11M\" jos nopeus\n"
+"on 11M) tai sinun pit盲盲 lis盲t盲 riitt盲v盲sti '0' (nollia) loppuun."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ei asetettu, valitse Velho tai Edistynyt.\n"
+msgid "Choose the connection you want to configure"
+msgstr "Valitse yhteys, jonka haluat asettaa"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Verkkoon k盲ytt盲en WebDAV.\n"
+msgid "Please wait, setting security level..."
+msgstr "Odota hetki, asetetaan turvatasoa..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Verkkoon k盲ytt盲en Rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 on ratkaiseva kehitysalusta"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Verkkoon k盲ytt盲en SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Asetan verkkolaitetta %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Verkkoon k盲ytt盲en FTP.\n"
+msgid "activated"
+msgstr "aktivoitu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Nauha \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Valitse verkkokortti jota k盲ytet盲盲n dhcp-palvelimelle."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-CD-ROM.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Etsin p盲ivitett盲vi盲 paketteja..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Kiintolevy.\n"
+msgid "Mount point: "
+msgstr "Liitospiste: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Demoni (%s) sis盲lt盲盲 :\n"
+msgid "parse all fonts"
+msgstr "j盲senn盲 kaikki kirjasimet"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tVarmuuskopiot k盲ytt盲v盲t: tar ja gzip\n"
+msgid "With X"
+msgstr "X-palvelimella"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tVarmuuskopiot k盲ytt盲v盲t: tar ja bzip2\n"
+msgid "Multi-head configuration"
+msgstr "Usean n盲yt枚n asettaminen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\t脛l盲 sis盲llyt盲 j盲rjestelm盲tiedostoja\n"
+msgid "No browser available! Please install one"
+msgstr "Ei selainta k盲ytett盲viss盲! Ole hyv盲 ja asenna jokin"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"S盲ilyt盲 muutokset?\n"
+"Nykyiset asetukset ovat:\n"
"\n"
-"- Valitsimet:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t k盲ytt盲j盲tunnus: %s\n"
-"\t\t polulla: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Et voi k盲ytt盲盲 ReiserFS:盲 alle 32 Mt osioilla"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Tallenna %s kautta palvelimella: %s\n"
+"Rwho-protokollalla et盲k盲ytt盲j盲t voivat listata kaikki\n"
+"koneella olevat k盲ytt盲j盲t (vastaa fingeri盲)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tPoista=%s"
+msgid "Domain name"
+msgstr "Verkkoalueen nimi"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Tallenna nauhalle laitteessa: %s"
+msgid "Sharing of local printers"
+msgstr "Paikallisten tulostimien jakaminen"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multi-sessio)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "laitteella: %s"
+msgid "Available printers"
+msgstr "Saatavilla olevat tulostimet"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Tyhj盲"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Polta CD:lle"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Poista tar tiedostot kovalevylt盲 varmistuksen j盲lkeen.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Tallenna kiintolevylle polulle: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Muut tiedostot:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (eli X Ikkunointij盲rjestelm盲) on GNU/Linuxin graafisen k盲ytt枚liittym盲n\n"
+"syd盲n jota kaikki graafiset ymp盲rist枚t (KDE, Gnome, AfterStep,\n"
+"WindowMaker jne.), jotka seuraavat Mandrake Linuxin mukana,\n"
+"k盲ytt盲v盲t alustana.\n"
"\n"
-"- K盲ytt盲j盲tiedostot:\n"
+"Sinulle n盲ytet盲盲n lista eri parametreista joita voit asettaa saadaksesi\n"
+"optimaalisen graafisen n盲yt枚n:\n"
+"\n"
+"N盲yt枚nohjain\n"
+"\n"
+" Asennusohjelma yleens盲 tunnistaa ja asettaa koneeseesi asennetun\n"
+"n盲yt枚nohjaimen. Mik盲li t盲m盲 ei onnistunut, voit itse valita oikean mallin\n"
+"listasta omistamasi korttisi mukaisesti.\n"
+"\n"
+" Mik盲li eri palvelimia on k盲ytett盲viss盲 kortillesi, 3D tuella vai ilman,\n"
+"sinua pyydet盲盲n valitsemaan palvelin joka parhaiten vastaa tarpeitasi.\n"
+"\n"
+"\n"
+"\n"
+"N盲ytt枚\n"
+"\n"
+" Asennusohjelma normaalisti tunnistaa ja asettaa koneeseesi liitetyn\n"
+"n盲yt枚n automaattisesti. Jos tunnistus ep盲onnistuu voit valita oikean\n"
+"n盲yt枚n listasta.\n"
+"\n"
+"\n"
+"\n"
+"N盲ytt枚tila\n"
+"\n"
+" T盲ss盲 voit valita n盲ytt枚tilan ja v盲risyvyyden jota laitteistosi tukee.\n"
+"Valitse se joka parhaiten vastaa tarpeitasi (voit tietysti vaihtaa sit盲\n"
+"asennuksen j盲lkeenkin). Malli valitusta asetuksesta n盲ytet盲盲n n盲yt枚ss盲.\n"
+"\n"
+"\n"
+"\n"
+"Testi\n"
+"\n"
+" J盲rjestelm盲 yritt盲盲 avata graafisen tilan halutussa n盲ytt枚tilassa.\n"
+"Jos n盲et viestin testauksen aikana ja vastaat \"%s\", DrakX jatkaa\n"
+"seuraavaan vaiheeseen. Jos et n盲e viesti盲, se tarkoittaa ett盲 jokin\n"
+"osa automaattisesti tunnistuksesta asetuksesta oli virheellist盲, ja\n"
+"testi loppuu automaattisesti 12 sekunnin j盲lkeen, jolloin p盲盲set\n"
+"takaisin asetusvalikoon. Muuta asetuksia kunnes saat oikean\n"
+"graafisen n盲yt枚n.\n"
+"\n"
+"\n"
+"\n"
+"Optiot\n"
+"\n"
+" T盲盲ll盲 voit valita haluatko j盲rjestelm盲n automaattisesti k盲ynnist盲v盲n\n"
+"graafisen k盲ytt枚liittym盲n. Luonnollisesti valitset \"%s\" jos koneesi "
+"toimii\n"
+"palvelimena, tai jos et pystynyt m盲盲ritt盲m盲盲n toimivaa graafista tilaa."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "tekstiruudun leveys"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "Minne haluat liitt盲盲 laitteen %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Vakio k盲ytt枚aika (sekunneissa)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Liit盲nt盲 \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Perusdokumentaation kanssa (suositeltu!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 n盲pp盲in"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- J盲rjestelm盲tiedostot:\n"
+"L枚ytyy %d tuntemattomia tulostimia jotka on kytketty suoraan koneeseesi"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Kokeile"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Parametrit: (arg)\n"
"\n"
-"Varmuuskopion l盲hteet: \n"
+"Salli / Est盲 root sis盲盲nkirjautuminen paikallisesti."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "Valitse k盲ytt盲j盲t yksitellen"
+msgid "Korea"
+msgstr "Korea"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Varmuuskopioi k盲ytt盲j盲t"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Valintasi? (oletus '%s'%s) "
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Varmuuskopioi j盲rjestelm盲"
+msgid "Raw printer"
+msgstr "Raakatulostin"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Valitse mit盲 haluat varmuuskopioida"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Prosessorin valmistajan virallinen nimi"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "Nauhalle"
+msgid "Vendor"
+msgstr "Valmistaja"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "CD-levylle"
+msgid "Interface %s"
+msgstr "Liit盲nt盲 %s"
-#: ../../standalone/drakbackup:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "verkon yli"
+msgid "Configure mouse"
+msgstr "Hiiren m盲盲rittely"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "kiintolevylle"
+msgid "Choose the mount points"
+msgstr "Valitse liitospisteet"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Valitse, mihin haluat tehd盲 varmuuskopiot"
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Lis盲valinnat"
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslavia (latin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Koska"
+msgid "Installing"
+msgstr "Asennan"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "Miss盲"
+msgid "Launch userdrake"
+msgstr "K盲ynnist盲 UserDrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Mit盲"
+msgid "Is this an install or an upgrade?"
+msgstr "Onko t盲m盲 asennus vai p盲ivitys?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Poista kovalevyll盲 olevat 'varmista toiselle medialle' j盲lkeiset tar-"
-"tiedostot"
+msgid "ISDN card"
+msgstr "ISDN-kortti"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "L盲het盲 raportti jokaisesta varmuuskopiosta s盲hk枚postitse:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Jakaaksesi omaa tiet盲myst盲si ja auttaaksesi Linux-ty枚kalujen kehityksess盲, "
+"liity keskustelufoorumeihin, joita l枚yd盲t meid盲n \"Yhteis枚\" webbisivuilta."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Varmista ett盲 cron demoni sis盲ltyy palveluihisi.\n"
+"Onnittelut, verkko- ja Internetyhteyksien asetus on valmis.\n"
"\n"
-"Huomaa ett盲 nykyhetkell盲 kaikki 'verkko' mediat k盲ytt盲v盲t my枚s kovalevy盲."
+"Asetukset otetaan nyt k盲ytt枚枚n j盲rjestelm盲ss盲.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Valitse varmuuskopiointiin\n"
-"k盲ytett盲v盲 media."
+msgid "\t-Hard drive.\n"
+msgstr "\t-Kiintolevy.\n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-"Valitse per盲kk盲isten\n"
-"varmuuskopioiden aikav盲li"
+"T盲m盲 vaihe asennuksesta n盲ytet盲盲n ainoastaan jos vanha GNU/Linux-\n"
+"osio on l枚ydetty koneestasi.\n"
+"\n"
+"DrakX haluaa nyt tiet盲盲, haluatko suorittaa uuden asennuksen vai vanhan\n"
+"Mandrake Linux -j盲rjestelm盲n p盲ivityksen:\n"
+"\n"
+" * \"%s\": oletuksena t盲m盲 tapa poistaa vanhan asennuksen. Jos haluat\n"
+"muuttaa miten kovalevysi on osioitu tai vaihtaa tiedostoj盲rjestelm盲盲, sinun\n"
+"kannattaa valita t盲m盲 vaihtoehto. Riippuen nykyisest盲 osioinnistasi, voit\n"
+"ehk盲 valita niin ettei kaikkia tietojasi h盲vitet盲.\n"
+"\n"
+" * \"%s\": t盲m盲 vaihtoehto sallii sinun p盲ivitt盲盲 paketteja\n"
+"nykyisess盲 Mandrake Linux -j盲rjestelm盲ss盲si. Nykyist盲 osiointiasi ei\n"
+"muuteta, eik盲 k盲ytt盲jien tietoja muuteta. Suurin osa muista asennus-\n"
+"vaiheista on k盲yt枚ss盲si niin kuin ne ovat vakioasennuksessa.\n"
+"\n"
+"``P盲ivit盲''-ominaisuuden pit盲isi toimia Mandrake Linux\n"
+"-j盲rjestelmiss盲 versioista \"8.1\" ja uudemmat. Vanhemman version\n"
+"kuin \"8.1\" p盲ivitt盲mist盲 ei suositella."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use daemon"
-msgstr "K盲yt盲 demonia"
+msgid "Printer on remote CUPS server"
+msgstr "Tulostin et盲palvelimella (CUPS)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "monthly"
-msgstr "kuukausittain"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Tulostimen \"%s\" poistaminen Star Office/OpenOffice.org/GIMP k盲yt枚st盲 "
+"ep盲onnistui."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "weekly"
-msgstr "viikoittain"
+msgid "delete"
+msgstr "poista"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "daily"
-msgstr "p盲ivitt盲in"
+msgid "here if no."
+msgstr "t盲h盲n jos et ole."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "hourly"
-msgstr "tunneittain"
+msgid "DHCP host name"
+msgstr "DHCP kone nimi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Kiintolevy / NFS"
+msgid "The maximum lease (in seconds)"
+msgstr "Maksimi k盲ytt枚aika (sekunneissa)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Mihin sarjaporttiin hiiresi on liitetty."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Sy枚t盲 hakemisto, johon tallennetaan:"
+msgid "Did it work properly?"
+msgstr "Toimiiko tulostus kunnolla?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Valitse t盲m盲 jos haluat poistaa nauhan varmistuksen j盲lkeen"
+msgid "Poor"
+msgstr "Huono"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Valitse, jos haluat tyhjent盲盲 nauhan ennen kopiointia"
+msgid "The DHCP start range"
+msgstr "DHCP:n alueen alku"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Valitse, jos haluat k盲ytt盲盲 ei-taaksekelautuvaa laitetta"
+msgid "Grenada"
+msgstr "Grenada"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Sy枚t盲 varmuuskopioinnissa k盲ytett盲v盲n laitteen nimi"
+msgid "Unsafe"
+msgstr "Turvaton"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr "K盲yt盲 nauhaa varmuuskopioinnissa"
+msgid ", %s sectors"
+msgstr ", %s sektoria"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Yht盲k盲盲n CD-asemaa ei m盲盲ritetty!"
+msgid "No"
+msgstr "Ei"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"Sy枚t盲 kirjoittavan CD-asemasi laitenimi\n"
-" esim: 0,1,0"
+"Onko tulostimesi HP tai Sony monitoimilaite (OfficeJet, PSC, LaserJet "
+"1100/1200/1220/3200/3300 kuvanlukijalla, Sony IJP-V100), HP PhotoSmart tai "
+"HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Valitse t盲m盲 jos k盲yt盲t DVDRAM laitetta"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Valitse t盲m盲 jos k盲yt盲t DVDR laitetta"
+msgid "could not find any font.\n"
+msgstr "kirjasimia ei l枚ytynyt.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid " Erase Now "
-msgstr " Tyhjenn盲 nyt "
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Haluatko Askelpalautin-n盲pp盲imen toimivan kuten Delete konsolissa?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Valitse t盲m盲 jos haluat tyhjent盲盲 RW-median (ensimm盲inen sessio)"
+msgid "Vertical refresh rate"
+msgstr "Pystyvirkistystaajuus"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Valitse t盲m盲 jos k盲yt盲t CD-RW-mediaa"
+msgid "Entering step `%s'\n"
+msgstr "Siirryn vaiheeseen `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "Valitse t盲m盲 jos haluat multisessio-CD:n"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Valitse CD/DVD mediasi koko (Mt)"
+msgid "Removing %s ..."
+msgstr "Poistetaan %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"Ole hyv盲 ja valitse CD/DVD-laitteesi\n"
-"(paina Enter t盲ytt盲盲ksesi asetukset muihin kenttiin.\n"
-" T盲m盲 kentt盲 ei ole pakollinen, ainoastaan ty枚kalu\n"
-" lomakkeen t盲ytt盲miseen.)"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "K盲yt盲 CD/DVD-ROM -levy盲 varmuuskopioille"
+msgid "No printer"
+msgstr "Ei tulostinta"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Verkkoaseman nimi, tunnus ja salasana tarvitaan!"
+msgid "alert configuration"
+msgstr "h盲lytyksen asetukset"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remember this password"
-msgstr "Muista t盲m盲 salasana"
+msgid "NetWare Printer Options"
+msgstr "NetWare tulostusparametrit"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please enter your password"
-msgstr "Sy枚t盲 salasanasi"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) esikatselu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please enter your login"
-msgstr "Sy枚t盲 k盲ytt盲j盲tunnuksesi"
+msgid "General"
+msgstr "Yleinen"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"Ole hyv盲 ja sy枚t盲 hakemisto (tai moduuli) johon\n"
-"haluat tallentaa varmistukset t盲ss盲 koneessa."
+msgid "Printing system: "
+msgstr "Tulostusj盲rjestelm盲: "
-#: ../../standalone/drakbackup:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Sy枚t盲 verkkoaseman nimi tai IP."
+msgid "Add a user"
+msgstr "K盲ytt盲jien lis盲盲minen"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Muut (ei drakbackup)\n"
-"avaimet ovat jo paikallaan"
+msgid "Network configuration (%d adapters)"
+msgstr "Verkon asetukset (%d-laitteille)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
+msgstr "Pakollinen paketti %s puuttuu"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filippiinit"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "OK"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Tulostusjonon nimi"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Haluatko k盲ytt盲盲 aboot:a?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Valkoven盲j盲"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-" Siirr盲 \n"
-"Nyt"
+"PDQ tukee vain paikallisia tulostimia, LPD et盲tulostimia, ja Socket/TCP "
+"tulostimia.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Siirr盲 tiedostot uuteen osioon"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Luo/Siirr盲\n"
-"SSH:n varmistusavaimet"
+"Lis盲盲 t盲h盲n CUPS-palvelimet, joiden tulostimia haluat k盲ytt盲盲. Sinun "
+"tarvitsee tehd盲 t盲m盲 vain mik盲li palvelimet eiv盲t l盲het盲 tulostintietojaan "
+"paikallisverkkoon."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "K盲yt盲 Expect SSH:lle"
+msgid "Restore From Catalog"
+msgstr "Palauta luettelosta"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "Verkko tapa:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "K盲yt盲 verkkoyhteytt盲 varmuuskopiointiin"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "K盲ytt盲j盲t"
+msgid "group :"
+msgstr "ty枚ryhm盲 :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "osion %s liitt盲minen hakemistoon %s ep盲onnistui"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "K盲yt盲 kasvavia varmuuskopioita (盲l盲 korvaa vanhoja varmuuskopioita)"
+msgid "Lilo screen"
+msgstr "Lilo n盲ytt枚"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Poista valitut"
+msgid "LILO with graphical menu"
+msgstr "LILO graafisella valikolla"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "脛l盲 sis盲llyt盲 selaimen v盲limuistia"
+msgid "Estimating"
+msgstr "Arvioin aikaa"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Valitse kaikki ne k盲ytt盲j盲t, jotka haluat sis盲llytt盲盲 varmuuskopioosi."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Et voi poistaa t盲m盲n paketin valintaa. Se on jo asennettu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", tulostin \"%s\" , SMB/Windows palvelimella \"%s\""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Go on anyway?"
+msgstr "Jatka kuitenkin?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"T盲ll盲 valitsimella voit palauttaa mink盲 tahansa version\n"
-"/etc-hakemistostasi."
+"Etsin saatavilla olevia paketteja, ja rakennan rpm-tietokannan uudelleen..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "脛l盲 sis盲llyt盲 kriittisi盲 tiedostoja (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "Ei n盲yt盲 olevan tallennusta tukevaa mediaa!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "K盲yt盲 kasvavaa varmuuskopiointia (盲l盲 korvaa vanhoja varmuuskopioita)"
+msgid "Specify options"
+msgstr "Lis盲asetukset"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Varmista j盲rjestelm盲tiedostot. (hakemisto /etc)"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"N盲ill盲 asetuksilla voit varmuuskopioida ja palauttaa kaikki tiedostot /etc-"
-"hakemistosta.\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Joko palvelimen nimi tai IP-osoite on annettava!"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Mukautetulla k盲ynnistyslevykkeell盲 voit k盲ynnist盲盲 j盲rjestelm盲n ilman\n"
+"tavanomaisen k盲ytt枚j盲rjestelm盲lataajan apua. T盲st盲 on hy枚ty盲, jos et halua\n"
+"asentaa SILOa j盲rjestelm盲盲si, toinen k盲ytt枚j盲rjestelm盲 poistaa SILOn,\n"
+"tai SILO ei toimi laitteistossasi. Mukautettua k盲ynnistyslevykett盲 voidaan\n"
+"k盲ytt盲盲 my枚s Mandraken pelastus-kuvan kanssa, jolloin vakavista\n"
+"j盲rjestelm盲n virhetilanteista on helpompi toipua.\n"
"\n"
-"Valitse kaikki asetukset jotka tarvitset.\n"
+"Jos haluat luoda k盲ynnistyslevykkeen j盲rjestelm盲盲si, aseta levyke\n"
+"ensimm盲iseen asemaan ja paina \"OK\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Valitse tiedostot tai hakemistot ja klikkaa 'Lis盲盲'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Et voi k盲ytt盲盲 salattua tiedostoj盲rjestelm盲盲 liitospisteelle %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "Tiedostojen valinta"
+msgid "Norfolk Island"
+msgstr "Norfolkinsaari"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "En voi luoda luetteloa!"
+msgid "Theme installation failed!"
+msgstr "Teeman asennus ep盲onnistui!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr "Virhe s盲hk枚postin l盲hetyksess盲. \n"
+msgid "Nothing to do"
+msgstr "Ei mit盲盲n tekemist盲"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup toimintoja nauhan kautta:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "K盲yt盲 loopback-tiedostoa"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup toimintoja CD:n kautta:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Mandraken virheenraportointity枚kalu"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use pppoe"
+msgstr "k盲yt盲 pppoe:t盲"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Siirr盲n tiedostoja uudelle osiolle"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s KOKEELLISELLA laitteistokiihdytetyll盲 3D-tuella"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Lis盲asetukset"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Siirr盲"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Ruotsi)"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup toimintoja %s kautta:\n"
-"\n"
+msgid "More Options"
+msgstr "Lis盲valinnat"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afganistan"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-"\n"
-" FTP yhteysongelma: Varmistustietojasi ei voitu l盲hett盲盲 FTP:n kautta.\n"
+"Poista kovalevyll盲 olevat 'varmista toiselle medialle' j盲lkeiset tar-"
+"tiedostot"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"tiedostolista l盲hetetty FTP:ll盲: %s\n"
-" "
+"cron on UNIX:n perusohjelma joka ajaa m盲盲riteltyj盲 ohjelmia m盲盲r盲tyill盲\n"
+"ajanhetkill盲. vixie cron lis盲盲 monia ominaisuuksia verrattuna normaaliin\n"
+"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Ei varmistettavia muutoksia!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Kiintolevyn varmuuskopiotiedostot..."
+msgid "Add Client -->"
+msgstr "Lis盲盲 asiakas -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Varmuuskopioi muut tiedostot..."
+msgid "Read carefully!"
+msgstr "Lue tarkkaan!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Kiintolevyn varmuuskopion edistyminen..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Varmuuskopioi k盲ytt盲j盲tiedostot..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"Ole hyv盲,\n"
+"kirjoita k盲ytt盲m盲si TV-normi sek盲 asuinmaa"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Varmuuskopioi j盲rjestelm盲tiedostot..."
+msgid "Port"
+msgstr "Portti"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Ei nauhaa asemassa %s!"
+msgid "No (experts only)"
+msgstr "Ei (vain asiantuntijoille)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Ongelma CD-k盲yt枚n oikeuksien kanssa."
+msgid "No kernel selected!"
+msgstr "Ydint盲 ei valittu!"
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Median tyhjent盲minen voi kest盲盲 hetken."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr ""
+"Paina enter k~^Dynnist~^D~^Dksesi valitun k~^Dytt~^Tj~^Drjestelm~^Dn, 'e'"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Ei tyhjennett盲v盲盲 mediaa!"
+msgid "Set-GID"
+msgstr "Aseta-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Ei n盲yt盲 olevan tallennusta tukevaa mediaa!"
+msgid "The encryption keys do not match"
+msgstr "Salausavaimet eiv盲t t盲sm盲盲"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Ei CDR/DVDR levy盲 asemassa!"
+msgid "Right \"Windows\" key"
+msgstr "Oikea \"Windows\" n盲pp盲in"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "WebDAV siirto ep盲onnistui!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "WebDAV et盲sivusto on jo synkronoitu!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "jos asetettu, tarkistetaan tyhj盲t salasanat tiedostossa /etc/shadow."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Kokonaisedistyminen"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Ennen jatkamista sinun pit盲isi lukea huolellisesti lisenssin ehdot.\n"
+"Lisenssi kattaa koko Mandrake Linux jakelun. Jos hyv盲ksyt kaikki\n"
+"ehdot, valitse \"%s\" vaihtoehto. Jos et hyv盲ksy ehtoja, sinun\n"
+"tarvitsee vain sammuttaa tietokoneesi."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Siirto onnistui\n"
-"Sinun kannattaa varmistaa ett盲 voit kirjoittautua palvelimeen komennolla:\n"
+"T盲ss盲 on lista nykyisen tulostimen k盲yt枚ss盲 olevista tulostusvalinnoista:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "N盲ytt枚tilat"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"ilman ett盲 sinulta pyydet盲盲n salasanaa."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"drakfirewall asetusty枚kalu\n"
+"\n"
+"T盲m盲 asettaa henkil枚kohtaisen palomuurin t盲h盲n Mandrake Linux koneeseen.\n"
+"Jos haluat vahvan omistetun palomuuri-ratkaisun ,voit katsoa erikoistettua\n"
+"MandrakeSecurity Firewall jakelua."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s ei vastaa"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Anna tunnuksesi, salasanasi ja verkkoalue k盲ytt盲盲ksesi t盲t盲 palvelinta."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "En l枚yd盲 %s kohteessa %s"
+msgid "Remove selected host"
+msgstr "Poista valittu kone"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Oikeudet ev盲tty siirrett盲ess盲 %s kohteeseen %s"
+msgid "Network configuration"
+msgstr "Verkon asetukset"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Virheellinen salasana kohteessa %s"
+msgid "No sharing"
+msgstr "Ei jaettu"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Ei salasanakysely盲 kohteessa %s portissa %s"
+msgid "Move selected rule down one level"
+msgstr "Alenna valittua s盲盲nt枚盲 yksi taso"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "VIRHE: En voi haroittaa %s"
+msgid "TB"
+msgstr "Tt"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Avaimien luominen voi kest盲盲 v盲h盲n aikaa."
+msgid "Please check if you are using a DVDR device"
+msgstr "Valitse t盲m盲 jos k盲yt盲t DVDR laitetta"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s on olemassa, poistanko?\n"
-"\n"
-"Varoitus: Jos olet jo suorittanut t盲m盲 prosessin, sinun pit盲盲\n"
-"todenn盲k枚isesti poistaa tietue authorized_keys tiedostosta palvelimella."
+msgid "FATAL"
+msgstr "VAKAVA"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"DHCP-palvelin sallii muiden tietokoneiden k盲ynnisty盲 k盲ytt盲en PXE:t盲 "
+"annetussa osoiteavaruudessa.\n"
"\n"
-" DrakBackup-raportin yksityiskohdat\n"
-"\n"
+"Verkko-osoite on: %s ja aliverkko on: %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Poista"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Parametrit: (arg)\n"
"\n"
-" DrakBackup-demonin raportti\n"
-"\n"
-"\n"
+"Salli / Est盲 'reboot' konsolin k盲ytt盲jille."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" DrakBackup-raportti \n"
-"\n"
+"Tietokoneesi voidaan asettaa k盲ynnistym盲盲n automaattisesti graafiseen tilaan "
+"(XFree).\n"
+"Haluatko XFree:n k盲ynnistyv盲n automaattisesti?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "TIEDOT"
+msgid "Build the disk"
+msgstr "Muodosta levy"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "VAKAVA"
+msgid "Disconnect %s"
+msgstr "Katkaise %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "VAROITUS"
+msgid "Status:"
+msgstr "Tila:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron ei viel盲 tue muita kuin p盲盲k盲ytt盲j盲盲"
+msgid "HTTP proxy"
+msgstr "HTTP-v盲lityspalvelin:"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s:n asennus ep盲onnistui. Seuraava virhe tapahtui:"
+msgid "SSH Server"
+msgstr "SSH-palvelin"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ei, en halua automaattista sis盲盲nkirjautumista"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Verkkoon k盲ytt盲en Rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Kyll盲, haluan automaattisen sis盲盲nkirjautumisen (k盲ytt盲j盲, ymp盲rist枚)"
+msgid "European protocol"
+msgstr "Eurooppalainen protokolla"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "K盲yt盲 X-Window-j盲rjestelm盲盲"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", tulostin \"%s\" palvelimella \"%s\""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "J盲rjestelm盲n tila"
+msgid "Error"
+msgstr "Virhe"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash"
+msgid "allow \"su\""
+msgstr "salli \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "Lilo n盲ytt枚"
+msgid "Australia"
+msgstr "Australia"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Valitse lilo:n ja \n"
-"bootsplash:n teema,\n"
-"voit valita ne erikseen."
+msgid "please wait during ttmkfdir..."
+msgstr "odota kunnes ttmkfdir on valmis..."
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Teemat"
+msgid "Configure only card \"%s\"%s"
+msgstr "Aseta vain kortin \"%s\"%s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "Splash valinta"
+msgid "Level"
+msgstr "Taso"
-#: ../../standalone/drakboot:1
+# Asennuksen sivuvalikko
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Change the printing system"
+msgstr "Muuta tulostusj盲rjestelm盲"
+
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"T盲ll盲 hetkell盲 k盲yt枚ss盲 oleva j盲rjestelm盲lataaja on %s.\n"
-"Valitse Aseta k盲ynnist盲盲ksesi asennusvelhon."
+"J盲rjestelm盲si tukee usean n盲yt枚n laitteistokokoonpanoa.\n"
+"Mit盲 haluat tehd盲?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo ja Bootsplash teemojen asennus onnistui."
+msgid "Configure services"
+msgstr "Palvelujen asettaminen"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "Teeman asennus ep盲onnistui!"
+msgid "Broadcast Address:"
+msgstr "L盲hetysosoite:"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Notice"
-msgstr "Huomautus"
+msgid "mount failed: "
+msgstr "liitt盲minen ep盲onnistui: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
+"GNU/Linuxin ytimen t盲ytyy suorittaa laskentasilmukka k盲ynnistyksen "
+"yhteydess盲 ajastimen alustamiseksi. Tulos tallennetaan bogomipsein盲, joka on "
+"tapa mitata prosessorin suorituskyky盲."
+
+#: ../../any.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Suorita 'lilo' uudelleen"
+msgid "Image"
+msgstr "Kuva"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-"En voi suorittaa LiLoa uudelleen!\n"
-"Suorita \"lilo\" p盲盲k盲ytt盲j盲n盲 komentorivill盲 \n"
-"LiLo teeman asennuksen viimeistelyyn."
+"Tulostimen \"%s\" lis盲盲minen Star Office/OpenOffice.org/GIMP k盲ytt枚枚n "
+"ep盲onnistui."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Tee initrd: 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Remote Administration"
+msgstr "Et盲hallinta"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "En voi suorittaa mkinitrd -f /boot/initrd-%s.img %s."
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr "PCMCIA tuki ei en盲盲 l枚ydy 2.2-sarjan ytimist盲. K盲yt盲 2.4 ydint盲."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-"En voi kirjoittaa /etc/sysconfig/bootsplash.\n"
-"Tiedostoa ei l枚ydy."
+msgid "Selected All"
+msgstr "Valitse kaikki"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Write %s"
-msgstr "Kirjoita %s"
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Yleinen Unix Tulostusj盲rjestelm盲"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "En voi kirjoittaa /etc/sysconfig/bootsplash."
+msgid "Webmin Service"
+msgstr "Webmin palvelu"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Lilo viesti ei l枚ydy"
+msgid "device"
+msgstr "laite"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Kopioidaan %s kohteeseen %s"
+msgid "All"
+msgstr "Kaikki"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Varmista %s kohteeseen %s.old"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Mit盲 tulostusj盲rjestelm盲盲 (jonoa) haluat k盲ytt盲盲?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Luo uusi teema"
+msgid "Greece"
+msgstr "Kreikka"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"N盲ytt枚 teema\n"
-"konsolissa"
+msgid "An error occurred"
+msgstr "Tapahtui virhe"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Asenna teemoja"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"T盲m盲 paketti tulee p盲ivitt盲盲.\n"
+"Oletko varma ett盲 haluat poistaa valinnan?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub-tila"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamil (kirjoituskone-asettelu)"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot-tila"
+msgid "manual"
+msgstr "manuaalinen"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "Printer manufacturer, model, driver"
+msgstr "Tulostimen valmistaja, malli, ajuri"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Tiedosto/_Lopeta"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Mediaa ei ole olemassa tai se on kirjoitussuojattu laitteessa %s.\n"
+"Ole hyv盲 ja aseta media."
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Tiedosto"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Hakemisto %s sis盲lt盲盲 jo jotakin tietoa\n"
+"(%s)"
-#: ../../standalone/drakboot:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "K盲ynnistystavan asetus"
+msgid "Printer on NetWare server"
+msgstr "Tulostin NetWare-palvelimella"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Ei selainta k盲ytett盲viss盲! Ole hyv盲 ja asenna jokin"
+msgid "Give the ram size in MB"
+msgstr "Anna muistin koko megatavuina (Mt)"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "yhdistet盲盲n Bugzilla velhoon ..."
+msgid "Real name"
+msgstr "Oikea nimi"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Package not installed"
-msgstr "Pakettia ei asennettu"
+msgid "done"
+msgstr "valmis"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not installed"
-msgstr "Ei asennettu"
+msgid "Please uncheck or remove it on next time."
+msgstr "Poista valinta tai poista se seuraavalla kerralla."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Itsen盲isi盲 ty枚kaluja"
+msgid "Higher"
+msgstr "Korkeampi"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Report"
-msgstr "Raportti"
+msgid "Choose the partitions you want to format"
+msgstr "Valitse alustettavat osiot"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Yht盲k盲盲n TV-korttia ei l枚ydetty koneestasi. Varmista, ett盲 Linux-tuettu "
+"Video/TV-kortti on kytketty oikein.\n"
"\n"
"\n"
-"L盲hett盲盲ksesi virheraportin, paina \"Raportti\" painiketta.\n"
-"T盲m盲 avaa webbiselaimen osoitteen: https://drakbug.mandrakesoft.com\n"
-"mist盲 l枚yd盲t t盲ytett盲v盲n lomakkeen. Yll盲 n盲ytetyt tiedot l盲hetet盲盲n yll盲\n"
-"mainitulle palvelimelle.\n"
+"Voit katsoa meid盲n laitteistotietokantaa osoitteesta:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Jakelu"
+msgid "Can't find %s on %s"
+msgstr "En l枚yd盲 %s kohteessa %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Ydin:"
+msgid "Japanese 106 keys"
+msgstr "Japani 106-n盲pp盲iminen"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paketti: "
+msgid "This will take a few minutes."
+msgstr "T盲m盲 kest盲盲 joitakin minuutteja."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Sovellus:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Asetusvelhot"
+msgid "Use scanners on remote computers"
+msgstr "K盲yt盲 et盲koneiden kuvanlukijoita"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Poista valittu s盲盲nt枚"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Windowsista siirtymisen ty枚kalu"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Tulostin CUPS-et盲palvelimella"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Aseta levyke asemaan %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Ohjelmiston hallinta"
+msgid "Maldives"
+msgstr "Maldiivit"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Kauko-ohjaus"
+msgid "compact"
+msgstr "tiivis"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minuutti"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "v盲yl盲ss盲 %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", monitoimilaite"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Synkronointity枚kalu"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Ei ole FAT-osioita, joiden kokoa voisi muuttaa (tai ei riitt盲v盲sti vapaata "
+"tilaa)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Aloittelija-velho"
+msgid "Up"
+msgstr "Yl枚s"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr "Mandraken Ohjauskeskus"
+msgid "Firewall"
+msgstr "Palomuuri"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Mandraken virheenraportointity枚kalu"
+msgid "Area:"
+msgstr "Alue :"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Parametrit"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA-ohjaimet"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Internetyhteyden asetus"
+msgid "Printer Server"
+msgstr "Tulostuspalvelin"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP-asiakas"
+msgid "Disconnection from the Internet complete."
+msgstr "Internetyhteyden katkaiseminen valmis."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Verkkokortti"
+msgid "Custom configuration"
+msgstr "Mukautettu asetus"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Yhdysk盲yt盲v盲"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Ole hyv盲 ja valitse miss盲 asennus-kuvatiedosto sijaitsee.\n"
+"\n"
+"Jos sinulle ei ole olemassaolevaa hakemistoa, ole hyv盲 ja kopioi CD-levyjen "
+"tai DVD-levyn sis盲lt枚.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Yhteyden nimi: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint Pierre ja Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profiili: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Varmistuksen palautusongelmia:\n"
+"\n"
+"Palautusvaiheen aikana Drakbackup tarkistaa kaikki\n"
+"varmistustiedostosi ennen niiden palauttamista.\n"
+"Ennen palauttamista Drakbackup poistaa alkuper盲iset\n"
+"hakemistosi ja menet盲t kaikki nykyiset datasi. On t盲rke盲盲\n"
+"olla varovainen eik盲 muokata varmistustiedostoja k盲sin.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Internetyhteyden asetus"
+msgid "saving Bootsplash theme..."
+msgstr "tallennan Bootsplash teeman..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan Internet-yhteytt盲.\n"
-"Luo sellainen ensin klikkaamalla 'Aseta'"
+msgid "Portugal"
+msgstr "Portugali"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"T盲t盲 liitynt盲盲 ei ole viel盲 asetettu.\n"
-"K盲ynnist盲 p盲盲ikkunasta l枚ytyv盲 asetusvelho"
+msgid "Do you have another one?"
+msgstr "Onko sinulla muita?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "aktivoi nyt"
+msgid ", printing to %s"
+msgstr ", tulostetaan kohteeseen: %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "deaktivoi nyt"
+msgid "Assign host name from DHCP address"
+msgstr "My枚nn盲 koneennimi DHCP osoitteesta"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "DHCP-asiakas"
+msgid "Toggle to normal mode"
+msgstr "Vaihda Vakio-tilaan"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "K盲ynnistetty koneen k盲ynnist盲misen yhteydess盲"
+msgid "Generic"
+msgstr "Yleinen"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "K盲ynnistysprotokolla"
+msgid "Cylinder %d to %d\n"
+msgstr "Sylinterist盲 %d sylinteriin %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Laite %s: %s"
+msgid "New profile..."
+msgstr "Uusi profiili..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "L盲hiverkon asetukset"
+msgid "Which disk do you want to move it to?"
+msgstr "Mille levylle haluat siirt盲盲?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "L盲hiverkon asetukset"
+msgid "Display logo on Console"
+msgstr "N盲yt盲 logo konsolissa"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan asetettua liitynt盲盲.\n"
-"Aseta ne ensin klikkaamalla 'Aseta'"
+msgid "Windows Domain"
+msgstr "Windows verkkoalue"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Yhdist盲..."
+msgid "Interface %s (on network %s)"
+msgstr "Liit盲nt盲 %s (verkossa %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Katkaise yhteys..."
+msgid "INFO"
+msgstr "TIEDOT"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Ei yhteytt盲"
+msgid "Wallis and Futuna"
+msgstr "Wallis ja Futuna"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Yhteys muodostettu"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Pit盲盲 ensin luoda /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "L枚ytyyk枚 FPU"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+"Yht盲k盲盲n kuvanlukijaa ei l枚ydetty, joka on kytketty suoraan tietokoneesi.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-"Varoitus, toinen Internet-yhteys on havaittu, mahdollisesti k盲ytt盲en sinun "
-"verkkoasi"
+"Ei lis盲tietoja\n"
+"t盲lle palvelulle, valitan."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Liit盲nt盲:"
+msgid "Build Single NIC -->"
+msgstr "K盲盲nn盲 yksi verkkokortti -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Yhdysk盲yt盲v盲:"
+msgid "Is this correct?"
+msgstr "Onko t盲m盲 oikein?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Toteuta"
+msgid "Marshall Islands"
+msgstr "Marshallinsaaret"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Paina t盲h盲n k盲ynnist盲盲ksesi asennusohjelman ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Velho..."
+msgid "Root password"
+msgstr "P盲盲k盲ytt盲j盲n salasana"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Tila:"
+msgid "Build All Kernels -->"
+msgstr "K盲盲nn盲 kaikki ytimet -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tyyppi:"
+msgid "if set to yes, report unowned files."
+msgstr "jos asetettu, raportoidaan omistamattomat tiedostot."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Internetyhteys"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Sinulla ei ole sivutusosiota\n"
+"\n"
+"Jatka kuitenkin?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Koneen nimi:"
+msgid "Server IP missing!"
+msgstr "Palvelimen IP puuttuu!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Aseta paikallisverkko..."
+msgid "Suriname"
+msgstr "Surinam"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "Tila"
+msgid "Enable ACPI"
+msgstr "Ota ACPI k盲ytt枚枚n"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Ajurit"
+msgid "Graphical Environment"
+msgstr "Graafinen ymp盲rist枚"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protokolla"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Liit盲nt盲"
+msgid "on Tape Device"
+msgstr "Nauhalle"
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "M盲盲rittele Internetyhteys..."
+msgid "Do nothing"
+msgstr "J盲t盲 tekem盲tt盲"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Odota hetki"
+msgid "Delete Client"
+msgstr "Poista asiakas"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Luotavan profiilin nimi (uusi profiili luodaan kopioimalla nykyisen tiedot) :"
+msgid "Filesystem type: "
+msgstr "Tiedostoj盲rjestelm盲: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Uusi profiili..."
+msgid "Starting network..."
+msgstr "K盲ynnist盲n verkkoa..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Valitse poistettava profiili:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Poista profiili..."
+msgid "/_Fields description"
+msgstr "/_Kenttien kuvaus"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Verkon asetukset (%d-laitteille)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimoi turvallisuutesi"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 N盲yt枚nhallinta sallii sinua k盲ytt盲m盲盲n graafista\n"
-"sis盲盲nkirjautumista j盲rjestelm盲盲n, jossa X-ikkunointij盲rjestelm盲 on "
-"k盲yt枚ss盲\n"
-"ja sallii useita samanaikaisia k盲ytt盲ji盲 paikallisessa koneessa."
+msgid "Help"
+msgstr "Apua"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "N盲yt枚nhallinnan valitseminen"
+msgid "Your personal phone number"
+msgstr "Henkil枚kohtainen puhelinnumerosi"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Kuinka paljon tilaa haluat s盲ilytt盲盲 Windowsille"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"mkbootdisk:盲 ei voitu sulkea oikein: \n"
-" %s \n"
-" %s"
+"Testisivu(t) on l盲hetetty tulostimelle.\n"
+"Voi kest盲盲 hetken ennen kuin tulostus alkaa.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Prosessia %s ei voitu haarauttaa"
+msgid "Username required"
+msgstr "K盲ytt盲j盲tunnus vaaditaan"
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Mediaa ei ole olemassa tai se on kirjoitussuojattu laitteessa %s.\n"
-"Ole hyv盲 ja aseta media."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Varmista, ett盲 media on laitteessa %s"
+"Tavallisesti DrakX valitsee sinulle oikean n盲pp盲imist枚n sen mukaan, mink盲\n"
+"kielen olet valinnut. Kuitenkaan sinulla ei v盲ltt盲m盲tt盲 ole n盲pp盲imist枚盲, "
+"joka\n"
+"vastaa suoraan kielt盲si. Jos olet esimerkiksi englanninkielinen "
+"sveitsil盲inen,\n"
+"voit silti haluta sveitsil盲isen n盲pp盲imist枚n. Tai jos puhut englantia, mutta "
+"asut\n"
+"Quebeciss盲, sinulla voi olla samanlainen tilanne, miss盲 kieli ja "
+"n盲pp盲imist枚\n"
+"eiv盲t vastaa toisiaan. Molemmissa tapauksissa t盲m盲 asennusvaihe antaa\n"
+"sinulle mahdollisuuden valita sopivan n盲pp盲imist枚n listasta.\n"
+"\n"
+"Paina \"%s\"-painiketta saadaksesi t盲ydellisen listan tuetuista\n"
+"n盲pp盲imist枚ist盲.\n"
+"\n"
+"Jos valitset n盲pp盲imist枚n joka ei perustu latinalaiseen kirjaimistoon, "
+"sinulta\n"
+"kysyt盲盲n n盲pp盲inyhdistelm盲盲 joka vaihtaa latinalaisenja ei-latinalaisen\n"
+"j盲rjestyksen v盲lill盲."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Muodosta levy"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) -tulostimen parametrit"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Tuloste"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Parametrit: (arg)\n"
+"\n"
+"Hyv盲ksy / Hylk盲盲 virheelliset IPv4 virheviestit."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Poista moduuli"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd vapaaehtoiset parametrit"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Lis盲盲 moduuli"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Selaa Interneti盲 k盲ytt盲en Mozilla tai Konqueror, lue s盲hk枚postit k盲ytt盲en "
+"Evolutionia tai KMailia, luo dokumenttejasi OpenOffice.org avulla."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "j盲t盲 pois scsi-moduulit"
+msgid "Protocol for the rest of the world"
+msgstr "Muun maailman k盲ytt盲m盲 protokolla"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "jos tarvitaan"
+msgid "Print test pages"
+msgstr "Tulosta testisivut"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "j盲t盲 pois raid-moduulit"
+msgid "64 MB or more"
+msgstr "64 Mt tai enemm盲n"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "pakota"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Valitse testisivut jotka haluat tulostaa.\n"
+"Huomautus: valokuva testisivun tulostus voi kest盲盲 aika kauan ja "
+"lasertulostimissa, joissa on liian v盲h盲n muistia, tulostus voi ep盲onnistua. "
+"Yleens盲 vakiotestisivun tulostus riitt盲盲."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd vapaaehtoiset parametrit"
+msgid "Please select the device where your %s is attached"
+msgstr "Valitse laite johon kuvanlukijasi %s on kytketty."
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Asiantuntijan alue"
+msgid "Not formatted\n"
+msgstr "Ei alustettu\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "ytimen versio"
+msgid "Periodic Checks"
+msgstr "Jaksottaiset tarkistukset"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "oletus"
+msgid "PXE Server Configuration"
+msgstr "PXE-palvelimen asetukset"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "Yleinen"
+msgid "Backup the system files before:"
+msgstr "Tee j盲rjestelm盲tiedostoista varmuuskopio ennen:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "k盲ynnistyslevykkeen luominen"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"T盲m盲 on vakio turvataso, jota suositellaan tietokoneelle, jota k盲ytet盲盲n\n"
+"Internetiss盲 asiakaskoneena."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Ensimm盲inen levykeasema"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Koko"
+msgid "/File/_Quit"
+msgstr "/Tiedosto/_Lopeta"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Moduulin nimi"
+msgid "Dvorak"
+msgstr "Dvorak"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Poistamisen j盲lkeiset toiminnot"
+msgid "Choose the new size"
+msgstr "Valitse uusi koko"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Poista j盲rjestelm盲ss盲si olevia kirjasimia"
+msgid "Media class"
+msgstr "Media luokka"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Alkutestit"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s ei ole tunnettu t盲ss盲 Scannerdraken versiossa."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Asennuksen j盲lkeiset toiminnot"
+msgid "Faroe Islands"
+msgstr "F盲盲rsaaret"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Asenna & muunna kirjasimia"
+msgid "Restart XFS"
+msgstr "K盲ynnist盲 XFS uudelleen"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopioi kirjasimet j盲rjestelm盲盲si"
+msgid "Add host/network"
+msgstr "Lis盲盲 kone/verkko"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "Poista lista"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"jos asetettu, tarkistetaan tyhj盲t salasanat, salasanan puuttuminen "
+"tiedostossa /etc/shadow ja muut k盲ytt盲j盲t kuin root joiden id on 0."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "Valitse kaikki"
+msgid "Please enter the directory to save to:"
+msgstr "Sy枚t盲 hakemisto, johon tallennetaan:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "Poista valinta kaikista"
+msgid "Model name"
+msgstr "Mallinimi"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "t盲h盲n jos et ole."
+msgid "Albania"
+msgstr "Albania"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "paina t盲h盲n, kun olet varma."
+msgid "No CDR/DVDR in drive!"
+msgstr "Ei CDR/DVDR levy盲 asemassa!"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Asennuslistaus"
+msgid "British Indian Ocean Territory"
+msgstr "Brittil盲inen Intian valtameren alue"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Valitse kirjasintiedosto tai hakemisto ja klikkaa 'Lis盲盲'"
+msgid "Normal Mode"
+msgstr "Perustila"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Ennen kuin asennat uusia kirjasimia, varmista ett盲 sinulla on oikeudet "
-"k盲ytt盲盲 ja asentaa ne j盲rjestelm盲盲si.\n"
+"Varmista ett盲 cron demoni sis盲ltyy palveluihisi.\n"
"\n"
-"- Voit asentaa kirjasimet perinteisell盲 tavalla. Harvoissa tapauksissa bogus-"
-"kirjasimet voivat lukita X-palvelimen."
+"Huomaa ett盲 nykyhetkell盲 kaikki 'verkko' mediat k盲ytt盲v盲t my枚s kovalevy盲."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Yleiset tulostimet"
+msgid "Printer connection type"
+msgstr "Tulostusyhteyden tyyppi"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Koneessasi ei ole verkkokorttia!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Verkko %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Valitse sovellukset, jotka tukevat kirjasimia:"
+msgid "Option %s out of range!"
+msgstr "Valitsin %s on arvoalueensa ulkopuolella!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002 MandrakeSoft \n"
-"\tDUPONT Sebastien (alkuper盲inen versio) \n"
-" CHAUMETTE Damien dchaumette\\@mandrakesoft.com\n"
-"\n"
-"T盲m盲 ohjelma on ilmainen; voit levitt盲盲 ja/tai muokata sit盲 Free\n"
-"Software Foundationin julkaiseman 'GNU General Public License'\n"
-"-lisenssin mukaisesti; joko lisenssin version 2 mukaisesti, tai\n"
-"(niin halutessasi) mink盲 tahansa uudemman version mukaisesti.\n"
-"\n"
-"T盲m盲 ohjelma on julkaistu siin盲 toivossa, ett盲 se osoittautuisi\n"
-"hy枚dylliseksi, mutta ILMAN MINK脛脛NLAISTA TAKUUTA; ilman edes\n"
-"oletettua takuuta TUOTTEEN TOIMIVUUDESTA tai SOPIVUUDESTA \n"
-"TIETTYYN TEHT脛V脛脛N. Lis盲tietoja saat tutustumalla 'GNU General \n"
-"Public License' dokumentaatioon.\n"
-"\n"
-"Hakemasi ohjelman mukana kuuluu tulla kopio 'GNU General Public License'\n"
-"dokumentaatiosta; jos n盲in ei ole, kirjoita osoitteeseen:\n"
-"Free Software Foundation Inc., 59 Temple Place - Suite 330,\n"
-" Boston, MA 02111-1307, USA.\n"
-"\n"
-" Kiitoksia:\n"
-" - pfm2afm: \n"
-"\t Ken Borgendale:\n"
-"\t Muuttaa Windows .pfm tiedoston .afm muotoon (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t James Macnicol: \n"
-"\t type1inst luo tiedostot fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Muuttaa ttf fonttitiedostot afm ja pfb fonteiksi\n"
+msgid "Connect %s"
+msgstr "Yhdist盲 %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "Tietoja"
+msgid "Restarting CUPS..."
+msgstr "K盲ynnistet盲盲n CUPS uudelleen..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Kirjasinlista"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Tulostus/Skannaus/Kuva-Kortit laitteella \"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Lis盲valinnat"
+msgid "Duplicate mount point %s"
+msgstr "Kahdentunut liitospiste %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "Poista kirjasimia"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "jos asetettu, suoritetaan chkrootkit tarkistuksia."
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "Hae Windowsin kirjasimet"
+msgid "Connection Configuration"
+msgstr "Yhteyden asetus"
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Kirjasinten tuonti"
+msgid "Unknown|Generic"
+msgstr "Tuntematon|Yleinen"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "valmis"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"T盲ss盲 vaiheessa, kun asennat Mandrake Linuxia, on todenn盲k枚ist盲 ett盲\n"
+"jotkut paketit on p盲ivitetty alkujulkaisun j盲lkeen. Joitakin virheit盲 voi "
+"olla\n"
+"korjattu ja turvallisuusaukkoja paikattu. Hy枚dynt盲盲ksesi n盲it盲 p盲ivityksi盲,\n"
+"sinulla on nyt mahdollisuus hakea ne Internetist盲. Valitse \"%s\" jos\n"
+"sinulla on toimiva Internet yhteys, tai \"%s\" jos haluat asentaa\n"
+"p盲ivitykset my枚hemmin.\n"
+"\n"
+"Valitsemalla \"%s\" sinulle n盲ytet盲盲n lista p盲ivityspalvelimista.\n"
+"Valitse l盲hin palvelin. Sen j盲lkeen sinulle n盲ytet盲盲n lista p盲ivityksist盲:\n"
+"tarkista valinnat ja paina \"%s\" jolloin paketit haetaan ja\n"
+"asennetaan, tai \"%s\" poistuaksesi p盲ivityksest盲."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "xfs:n uudelleenk盲ynnistys"
+msgid "Quit"
+msgstr "Lopeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Poista kirjasintiedostot"
+msgid "Myanmar"
+msgstr "Myanmar"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "K盲ynnist盲 XFS uudelleen"
+msgid "Auto allocate"
+msgstr "Automaattinen varaus"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Poista v盲liaikaistiedostot"
+msgid "Check bad blocks?"
+msgstr "Tarkista vialliset lohkot?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "rakennetaan: type1inst"
+msgid "Other MultiMedia devices"
+msgstr "Muu multimedialaite"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "pfm kirjasinten muunnos"
+msgid "No remote machines"
+msgstr "Ei et盲koneita"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "ttf kirjasinten muunnos"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Tervetuloa Tulostimen asetusvelhoon\n"
+"\n"
+"T盲m盲 velho auttaa sinua asentamaan paikallisesti liitetyn tulostimen "
+"(tulostimia).\n"
+"\n"
+"Jos sinulla on paikallisesti liitetty tulostin (tulostimia), varmista ett盲 "
+"se/ne on kytketty p盲盲lle jotta se/ne voidaan tunnistaa automaattisesti.\n"
+"\n"
+"Paina \"Seuraava\" kun haluat jatkaa tai \"Peruuta\" jos et halua asettaa "
+"tulostinta (tulostimia) nyt."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript viittaus"
+msgid "Authentication NIS"
+msgstr "Tunnistus: NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Kirjasinten muuntaminen"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"Asetus ``Rajoita komentorivioptioita'' ei ole hy枚dyllinen ilman salasanaa"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "True Type -asennus valmis"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Internetyhteyden jakaminen on k盲yt枚ss盲"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "odota kunnes ttmkfdir on valmis..."
+msgid "Card IO_0"
+msgstr "Kortin IO_0"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "True Type -kirjasimien asennus"
+msgid "United Arab Emirates"
+msgstr "Arabiemiirikunnat"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Kirjasimien kopioiminen"
+msgid "Card IO_1"
+msgstr "Kortin IO_1"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Etsi kirjasimia asennettujen listalta"
+msgid "Thailand"
+msgstr "Thaimaa"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "kirjasimia ei l枚ytynyt.\n"
+msgid "Routers:"
+msgstr "Reitittimet:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Valitse uudelleen oikeat kirjasimet"
+msgid "Kazakhstan"
+msgstr "Kazakstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "liitetyilt盲 osioilta ei l枚ytynyt ainoatakaan kirjasinta"
+msgid "Display all available remote CUPS printers"
+msgstr "N盲yt盲 kaikki saatavilla olevat CUPS-et盲tulostimet"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "kirjasimia ei l枚ytynyt"
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux asennus %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "j盲senn盲 kaikki kirjasimet"
+msgid "Thai keyboard"
+msgstr "Thai-n盲pp盲imist枚"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "Poista asennettujen kirjasimien valinta"
+msgid "Dialup options"
+msgstr "Soittoasetukset"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Etsi asennetut kirjasimet"
+msgid "Bouvet Island"
+msgstr "Bouvet'nsaari"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "Jos porttia ei ole m盲盲ritetty, k盲ytet盲盲n oletusporttia 631"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Tervetuloa Internetyhteyden jakamisen apuohjelmaan!\n"
-"\n"
-"%s\n"
+"Vaihda CD-levy盲!\n"
"\n"
-"Paina Aseta k盲ynnist盲盲ksesi asennusvelhon."
+"Aseta CD-levy nimelt盲盲n \"%s\" CD-asemaan ja paina OK kun olet valmis.\n"
+"Jos sinulla ei ole levy盲, paina Peruuta v盲ltt盲盲ksesi asennukset t盲lt盲 "
+"levylt盲."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Internetyhteyden jakamisen asetukset"
+msgid "Polish"
+msgstr "Puola"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetyhteyden jakamista ei ole koskaan asetettu."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Asetukset on jo tehty ja ne ovat k盲yt枚ss盲."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Verkkoon k盲ytt盲en WebDAV.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"Asetukset on jo tehty, mutta ne ovat t盲ll盲 hetkell盲 poistettu k盲yt枚st盲."
+"Koneestasi ei l枚ytynyt yht盲盲n verkkokorttia. Aja laitteiston "
+"tunnistusty枚kalu."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kaikki asetettu.\n"
-"Voit nyt jakaa Internetyhteyden muiden l盲hiverkon koneiden kanssa "
-"k盲ytt盲m盲ll盲 automaattista l盲hiverkon m盲盲rittely盲 (DHCP)."
+msgid "Netmask"
+msgstr "Verkkopeite"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Ongelmia asennettaessa pakettia %s"
+msgid "No hard drives found"
+msgstr "Yht盲k盲盲n kovalevy盲 ei l枚ytynyt"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"M盲盲rittelen komentotiedostot, asennan ohjelmistot, k盲ynnist盲n palvelimet..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "M盲盲rittelen..."
+msgid "2 buttons"
+msgstr "2 n盲pp盲int盲"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Mahdollinen l盲hiverkon osoiteristiriita l枚ydetty nykyisill盲 asetuksilla %s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Mink盲lainen ISDN-yhteytesi on?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Paikallisverkko ei loppunut '.0':aan, t盲ydennet盲盲n."
+msgid "Label"
+msgstr "Nimike"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Aseta liit盲nt盲 ja DHCP-palvelin uudelleen"
+msgid "Save on floppy"
+msgstr "Tallenna levykkeelle"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimi k盲ytt枚aika (sekunneissa)"
+msgid "Printer auto-detection"
+msgstr "Tulostimen automaattinen tunnistus"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Vakio k盲ytt枚aika (sekunneissa)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Mik盲 n盲ist盲 on ISDN-korttisi?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "DHCP:n alueen loppu"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
+"verkoissa. T盲m盲 palvelu mahdollistaa NFS-palvelimen\n"
+"k盲ynnistyksen, jakoa ohjataan tiedostosta /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "DHCP:n alueen alku"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Sis盲inen verkkoalueen nimi"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Huomaa, nimike vaihtui:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS-palvelimen IP-osoite"
+msgid "Number of capture buffers:"
+msgstr "Kaappauspuskurien m盲盲r盲:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(T盲m盲n) DHCP-palvelimen IP-osoite"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Valintasi? (0/1, oletus '%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"DHCP-palvelimen asettaminen.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"T盲盲lt盲 voit valita erilaiset optiot DHCP-palvelimen asettamiseen.\n"
-"Jos et tied盲 jonkun option tarkoitusta, j盲t盲 se oletusarvoonsa.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Paikallisverkon osoite"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Voin pit盲盲 nykyiset asetuksesi sek盲 olettaa ett盲 olet jo asettanut DHCP-"
-"palvelimen; siin盲 tapauksessa varmista, ett盲 olen tunnistanut k盲ytt盲m盲si "
-"verkkoasetukset verkollesi oikein; en aseta sit盲 uudelleen enk盲 koske DHCP-"
-"palvelimen asetuksiin.\n"
+"Kaikki vasta m盲盲ritellyt osiot t盲ytyy alustaa k盲ytt枚盲 varten (alustaminen\n"
+"tarkoittaa tiedostoj盲rjestelm盲n luomista).\n"
"\n"
-"Oletus DNS-tietue on v盲limuisti-nimipalvelin, joka on asetettu palomuurissa. "
-"Voit vaihtaa sen tilalle esimerkiksi Internet-palveluntarjoajasi DNS:n IP:"
-"n.\n"
+"Samalla voit haluta alustaa uudelleen my枚s olemassaolevia osioita\n"
+"poistaaksesi kaiken niiss盲 olevan tiedon. Jos haluat haluat tehd盲 niin,\n"
+"valitse my枚s ne osiot.\n"
"\n"
-"Tai, voin uudelleenasettaa verkkoliit盲nt盲si ja (uudelleen)asettaa DHCP-"
-"palvelimen sinulle.\n"
+"Huomaa, ett盲 sinun ei ole pakko alustaa kaikkia jo olemassa olevia\n"
+"osioita. Sinun pit盲盲 alustaa ne osiot, joilla k盲ytt枚j盲rjestelm盲\n"
+"sijaitsee (kuten \"/\", \"/usr\" ja \"/var\"), mutta voit s盲ilytt盲盲 osiot,\n"
+"joilla henkil枚kohtaiset tiedostosi sijaitsevat (tavallisesti \"/home\").\n"
+"\n"
+"Ole huolellinen osioita valitessasi. Alustamisen j盲lkeen kaikki tieto\n"
+"valituilla osioilla on poissa eik盲 niiden palauttaminen en盲盲 onnistu.\n"
+"\n"
+"Valitse \"%s\" kun olet valmis alustamaan osiot.\n"
"\n"
+"Valitse \"%s\", jos haluat valita toisen osion Mandrake Linuxin\n"
+"asentamiseen.\n"
+"\n"
+"Valitse \"%s\", jos haluat valita osiot, jotka tarkistetaan\n"
+"levyll盲 olevien viallisten lohkojen varalta."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Ranska"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tsekki (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Laitteiston tunnistaminen k盲ynniss盲..."
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "Verkkolaite"
+
+# Asennuksen sivuvalikko
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Yhteenveto"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Koneen `%s' nykyiset asetukset:\n"
-"\n"
-"Verkko: %s\n"
-"IP-osoite: %s\n"
-"IP-m盲盲reet: %s\n"
-"Ajuri: %s"
+" (Rinnakkaisportit: /dev/lp0, /dev/lp1, ..., vastaavat LPT1:, LPT2:, ..., 1. "
+"USB-tulostin: /dev/usb/lp0, 2. USB-tulostin: /dev/usb/lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Nykyiset liit盲nt盲asetukset"
+msgid "Next"
+msgstr "Seuraava"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "N盲yt盲 nykyiset liit盲nt盲asetukset"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Et voi asentaa k盲ytt枚j盲rjestelm盲n lataajaa osiolle %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Ei (vain asiantuntijoille)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automaattinen uudelleenasetus"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Varoitus, verkkokortti (%s) on jo asetettu.\n"
"\n"
-"Haluatko automaattisen uudelleenasetuksen?\n"
+"Tervetuloa.\n"
"\n"
-"Voit asettaa sen my枚s manuaalisesti, mutta silloin sinun pit盲盲 tiet盲盲, mit盲 "
-"olet tekem盲ss盲."
+"Automaattisen asennuksen parametrit l枚ytyv盲t vasemmalla olevista lohkoista"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Verkkoliit盲nt盲 on jo asetettu"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Valitse verkkokortti, joka on kytketty paikallisverkkoon."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"paketti 'ImageMagick' vaaditaan jotta kaikki toimisi oikein.\n"
+"Paina \"Ok\" asentaaksesi 'ImageMagick\" tai \"Peruuta\" lopettaaksesi."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Liettua \"numerorivi\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Tietokoneessasi on vain yksi verkkokortti:\n"
-"\n"
+"Seuraavat paketit poistetaan jotta j盲rjestelm盲si voidaan p盲ivitt盲盲:\n"
"%s\n"
"\n"
-"Valmistaudun asettamaan l盲hiverkkosi asetukset kyseiselle laitteelle."
+"Haluatko varmasti poistaa n盲m盲 paketit?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Verkkoliit盲nt盲"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Koneestasi ei l枚ytynyt yht盲盲n verkkokorttia. Aja laitteiston "
-"tunnistusty枚kalu."
+msgid "NIS Domain"
+msgstr "NIS-verkkoalue"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Koneessasi ei ole verkkokorttia!"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- K盲ytt盲j盲tiedostot:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Liit盲nt盲 %s"
+msgid "Antarctica"
+msgstr "Antarktis"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liit盲nt盲 %s (k盲ytt盲en moduulia %s)"
+msgid "Mount options"
+msgstr "Liitt盲misen optiot"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "Verkkolaite"
+msgid "Jamaica"
+msgstr "Jamaika"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Ole hyv盲 ja sy枚t盲 liitynn盲n nimi jolla yhdistet盲盲n Internettiin.\n"
-"\n"
-"Esimerkkej盲:\n"
-"\t\tppp+ modeemi tai DSL yhteyksille.\n"
-"\t\teth0 tai eth1 kaapeliyhteydelle.\n"
-"\t\tppp+ ISDN-yhteydelle.\n"
+"M盲盲r盲盲 raakalaitteet lohkolaitteiksi (kuten kiintolevyn osiot)\n"
+"tietyn tyyppisten sovellusten, kuten Oracle tai DVD-soitin, k盲ytt枚枚n"
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Olet aikeissa asettaa tietokoneesi jakamaan Internetyhteyden muiden koneiden "
-"kanssa.\n"
-"T盲ll盲 ominaisuudella muut paikallisverkossa olevat tietokoneet voivat "
-"k盲ytt盲盲 t盲m盲n tietokoneen Internetyhteytt盲.\n"
-"\n"
-"Varmista ett盲 olet m盲盲ritt盲nyt verkkosi/Internetyhteytesi k盲ytt盲m盲ll盲 "
-"drakconnect:a ennen kuin jatkat.\n"
+"Parametrit: (arg, alert=1)\n"
"\n"
-"Huomaa: tarvitset erityisen verkkokortin pystytt盲盲ksesi oman paikallisverkon."
+"Ota k盲ytt枚枚n / poista k盲yt枚st盲 nimiselvityksen spoofing suojaus.\n"
+"Jos \\fIalert\\fP on tosi, raportoidaan my枚s syslog:iin."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Internetyhteyden jakaminen"
+msgid "Please wait, preparing installation..."
+msgstr "Odota, valmistelen asennusta..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Internetyhteyden jakaminen on nyt k盲yt枚ss盲."
+msgid "Czech (QWERTZ)"
+msgstr "Tsekki (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Otan palvelut k盲ytt枚枚n.."
+msgid "Track network card id (useful for laptops)"
+msgstr "Selvit盲 verkkokortti-id (hy枚dyllist盲 sylimikroille)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "peruuta"
+msgid "The port number should be an integer!"
+msgstr "Portin numeron pit盲isi olla kokonaisluku!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "aseta uudelleen"
+msgid "You must choose an image file first!"
+msgstr "Sinun pit盲盲 valita kuvatiedosto ensin!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "ota k盲ytt枚枚n"
+msgid "Restore from Hard Disk."
+msgstr "Palauta kiintolevylt盲."
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on: ei k盲yt枚ss盲\n"
-"\n"
-"Mit盲 haluat tehd盲?"
+msgid "Add to LVM"
+msgstr "Lis盲盲 LVM:iin"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetyhteyden jakaminen ei ole k盲yt枚ss盲"
+msgid "DNS server"
+msgstr "Nimipalvelin"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Internetyhteyden jakaminen ei ole en盲盲 k盲yt枚ss盲."
+msgid "Trinidad and Tobago"
+msgstr "Trinidad ja Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Poistan palvelut k盲yt枚st盲..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD ja LPRng eiv盲t tue IPP-tulostimia.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "disable"
-msgstr "poista k盲yt枚st盲"
+msgid "simple"
+msgstr "yksinkertainen"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on: k盲yt枚ss盲.\n"
-"\n"
-"Mit盲 haluat tehd盲?"
+msgid "Clear all"
+msgstr "Tyhjenn盲 kaikki"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetyhteyden jakaminen on k盲yt枚ss盲"
+msgid "No test pages"
+msgstr "Ei testisivuja"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "Valitamme, tuemme ainoastaan 2.4 ytimi盲."
+msgid "Adapter %s: %s"
+msgstr "Laite %s: %s"
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Falklandinsaaret"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown model"
+msgstr "Tuntematon malli"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"Selainta ei ole asennettu j盲rjestelm盲ss盲si, ole hyv盲 ja asenna jokin jos "
-"haluat selata ohjej盲rjestelm盲盲"
+"jos asetettu, tarkistetaan sallivatko tiedostot/hakemistot kirjoituksen "
+"kaikille."
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "Path"
-msgstr "Polku"
+msgid "authentication"
+msgstr "tunnistustapa"
-#: ../../standalone/drakperm:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "group :"
-msgstr "ty枚ryhm盲 :"
+msgid "Backup Now"
+msgstr "Varmuuskopioi heti"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "user :"
-msgstr "k盲ytt盲j盲 :"
+msgid "/_File"
+msgstr "/_Tiedosto"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path selection"
-msgstr "Polun valinta"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Poistetaan tulostin Star Office/OpenOffice.org/GIMP k盲yt枚st盲."
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "kun valittu, omistajaa ja ryhm盲盲 ei muuteta"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"K盲ynnist盲 pakettisuodatin Linux 2.2-sarjalle, jos haluat\n"
+"pystytt盲盲 palomuurin suojaamaan konettasi verkkohy枚kk盲yksilt盲."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use group id for execution"
-msgstr "k盲yt盲 ryhm盲 id suoritukseen"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamil (ISCII-asettelu)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "k盲yt盲 omistaja id suoritukseen"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"K盲ytet盲盲n hakemistolle:\n"
-" ainoastaan hakemiston omistaja voi poistaa sen"
+msgid "Creating auto install floppy..."
+msgstr "Valmistelen automaattiasennuslevykett盲..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-GID"
-msgstr "Aseta-GID"
+msgid "Searching for scanners ..."
+msgstr "Etsit盲盲n kuvanlukijoita ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Aseta-UID"
+msgid "Partitioning"
+msgstr "Osiointi"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "tahmea-bitti"
+msgid "Russia"
+msgstr "Ven盲j盲"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Property"
-msgstr "Ominaisuus"
+msgid "ethernet card(s) detected"
+msgstr "seuraavat ethernet-verkkokortit l枚ydetty"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Permissions"
-msgstr "Oikeudet"
+msgid "Syslog"
+msgstr "J盲rjestelm盲loki"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current user"
-msgstr "Nykyinen k盲ytt盲j盲"
+msgid "Can't create catalog!"
+msgstr "En voi luoda luetteloa!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "browse"
-msgstr "selaa"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Viimeistele turvallisuusasetuksesi t盲ll盲 helppok盲ytt枚isell盲 ohjelmalla joka "
+"yhdist盲盲 suuritehoisia osia kuten palomuuri, virtuaalinen yksityisverkko "
+"(VPN) -palvelin ja -asiakas, tunkeutumistunnistusj盲rjestelm盲 ja "
+"liikennehallinta."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Edit current rule"
-msgstr "Muokkaa nykyist盲 s盲盲nt枚盲"
+msgid "Not enough free space for auto-allocating"
+msgstr "Vapaa tila ei riit盲 automaattiseen varaukseen"
-#: ../../standalone/drakperm:1
+# Asennuksen sivuvalikko
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "edit"
-msgstr "muokkaa"
+msgid "Set root password"
+msgstr "Yll盲pit盲j盲n (\"root\") salasana"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Poista valittu s盲盲nt枚"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"脛盲nikortillesi (%s) ei l枚ydy vapaata ajuria, mutta patenttisuojattu ajuri "
+"l枚ytyy osoitteesta \"%s\"."
-#: ../../standalone/drakperm:1
+# mat
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "delete"
-msgstr "poista"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Osion %s koon muuttamisen j盲lkeen kaikki osion tiedot tuhoutuvat"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Lis盲盲 uusi s盲盲nt枚 viimeiseksi"
+msgid "Internet connection configuration"
+msgstr "Internetyhteyden asetus"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "add a rule"
-msgstr "Lis盲盲 s盲盲nt枚"
+msgid "Scanning for TV channels"
+msgstr "Haetaan TV-kanavia"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Alenna valittua s盲盲nt枚盲 yksi taso"
+msgid "Kernel:"
+msgstr "Ydin:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Down"
-msgstr "Alas"
+msgid "/_About..."
+msgstr "/_Tietoja..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Ylenn盲 valittua s盲盲nt枚盲 yksi taso"
+msgid "Bengali"
+msgstr "Bengali"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr "Yl枚s"
+msgid "Preference: "
+msgstr "Ominaisuus: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "valitse n盲ytett盲v盲/muokattava perm tiedosto"
+msgid "Wizard..."
+msgstr "Velho..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm:盲 k盲ytet盲盲n tiedostojen katseluun korjataksesi oikeudet, omistajat "
-"ja ryhm盲t msec:n kautta.\n"
-"Voit my枚s muokata omat s盲盲nn枚t jotka ylikirjoittavat oletuss盲盲nn枚t."
+msgid "Services: %d activated for %d registered"
+msgstr "Palvelut: %d aktivoitu %d:st盲 rekister枚idyst盲"
-#: ../../standalone/drakperm:1
+# Asennuksen sivuvalikko
+#: ../../any.pm:1
#, c-format
-msgid "permissions"
-msgstr "oikeudet"
+msgid "Create a bootdisk"
+msgstr "Luo k盲ynnistyslevyke"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "group"
-msgstr "ty枚ryhm盲"
+msgid "Solomon Islands"
+msgstr "Salomonsaaret"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "user"
-msgstr "k盲ytt盲j盲"
+msgid "(module %s)"
+msgstr "(moduuli %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "polku"
+msgid "Workgroup"
+msgstr "Ty枚ryhm盲"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "auto_install.cfg tiedoston sijainti"
+msgid "Printer host name or IP"
+msgstr "Tulostinlaitteen verkkonimi tai osoite"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Ole hyv盲 ja m盲盲rit盲 miss盲 auto_install.cfg tiedosto sijaitsee.\n"
-"\n"
-"J盲t盲 tyhj盲ksi jos et halua asettaa automaattiasennuksen tilaa.\n"
-"\n"
+msgid "Host Path or Module"
+msgstr "Koneen polku tai moduuli"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"CD- tai DVD-kuvaa ei l枚ydy, ole hyv盲 ja kopioi asennusohjelma ja rpm-"
-"tiedostot."
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Tulostimen nimi saa sis盲lt盲盲 vain kirjaimia, numeroita ja alaviivan"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No image found"
-msgstr "Kuvatiedostoa ei l枚ydetty"
+msgid "Show current interface configuration"
+msgstr "N盲yt盲 nykyiset liit盲nt盲asetukset"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "Installation image directory"
-msgstr "Asennus-kuvatiedoston hakemisto"
+msgid "Development"
+msgstr "Kehitysymp盲rist枚"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Ole hyv盲 ja valitse miss盲 asennus-kuvatiedosto sijaitsee.\n"
-"\n"
-"Jos sinulle ei ole olemassaolevaa hakemistoa, ole hyv盲 ja kopioi CD-levyjen "
-"tai DVD-levyn sis盲lt枚.\n"
-"\n"
+msgid "Done"
+msgstr "Valmis"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP:n alueen loppu"
+msgid "Web Server"
+msgstr "Webbipalvelin"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP:n alueen alku"
+msgid "\tDo not include System Files\n"
+msgstr "\t脛l盲 sis盲llyt盲 j盲rjestelm盲tiedostoja\n"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Chile"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"DHCP-palvelin sallii muiden tietokoneiden k盲ynnisty盲 k盲ytt盲en PXE:t盲 "
-"annetussa osoiteavaruudessa.\n"
+"Lexmark:in tuottamat inkjet tulostimien ajurit tukevat ainoastaan "
+"paikallisia tulostimia, mutta ei lainkaan et盲koneiden tai "
+"tulostinpalvelimien tulostimia. Liit盲 tulostin paikalliseen porttiin tai "
+"aseta se koneessa johon se on liitetty."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Verkko-osoite on: %s ja aliverkko on: %s.\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+"Monitoimilaitteesi asetettiin automaattisesti osaamaan skannauksen. Nyt voit "
+"skannata komennolla \"scanimage\" (\"scanimage -d hp:%s\" m盲盲ritt盲盲ksesi "
+"skanneri jos sinulla on enemm盲n kuin yksi) komentorivill盲 tai graafisella "
+"k盲ytt枚liittym盲ll盲: \"xscanimage\" tai \"xsane\". Jos k盲yt盲t GIMP:盲 voit my枚s "
+"skannata valitsemalla sopivan pisteen \"Tiedosto\"/\"Nouda\" valikosta. Voit "
+"my枚s kutsua \"man scanimage\" komentorivill盲 saadaksesi lis盲盲 tietoa.\n"
"\n"
+"脛l盲 k盲yt盲 \"scannerdrake\":a t盲lle laitteelle!"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Liit盲nt盲 %s (verkossa %s)"
+msgid "(already added %s)"
+msgstr "(lis盲tty jo: %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Valitse verkkokortti jota k盲ytet盲盲n dhcp-palvelimelle."
+msgid ", using command %s"
+msgstr ", k盲ytt盲en komentoa %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Olet aikeissa asettaa tietokoneesi asentamaan PXE palvelimen toimimaan "
-"DHCP-\n"
-"palvelimena, ja TFTP palvelimen rakentaaksesi asennuspalvelimen.\n"
-"\n"
-"T盲ll盲 ominaisuudella muut paikallisverkossa olevat tietokoneet voidaan \n"
-"asentaa k盲ytt盲m盲ll盲 t盲m盲n palvelimen tietoja.\n"
-"\n"
-"Varmista ett盲 olet m盲盲ritt盲nyt verkkosi/Internetyhteytesi k盲ytt盲m盲ll盲 "
-"drakconnect:a ennen kuin jatkat.\n"
-"\n"
-"Huomaa: tarvitset erityisen verkkokortin pystytt盲盲ksesi oman paikallisverkon."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt ja Shift n盲pp盲imet samanaikaisesti"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Asennuspalvelimen asetus"
+msgid "Flags"
+msgstr "Liput"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "PXE-palvelimen asetukset"
+msgid "Add/Del Users"
+msgstr "Lis盲盲/Poista k盲ytt盲ji盲"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Odota hetki, asetetaan turvaoptiot..."
+msgid "Host/network IP address missing."
+msgstr "Koneen/verkon IP-osoite puuttuu."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Odota hetki, asetetaan turvatasoa..."
+msgid "weekly"
+msgstr "viikoittain"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
-msgstr "Jaksottaiset tarkistukset"
+msgid "Settings"
+msgstr "Asetukset"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "J盲rjestelm盲optiot"
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Sy枚tetty koneen/verkon IP on virheellinen.\n"
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "Network Options"
-msgstr "Verkko-optiot"
+msgid "Here is the full list of available countries"
+msgstr "T盲ss盲 on koko lista k盲ytett盲viss盲 olevista maista"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Vaihtoehtoinen testisivu (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Seuraavat optiot voidaan asettaa j盲rjestelm盲si turvallisuuden \n"
-"r盲盲t盲l枚intiin. Jos tarvitset selityksi盲, katso apuvinkit.\n"
+"Jos sinulla on kaikki CD-levyt allaolevalta listalta, paina OK.\n"
+"Jos sinulla ei ole mit盲盲n levyist盲, paina Peruuta.\n"
+"Jos jotkut levyist盲 puuttuvat, poista niiden valinnat, ja paina OK."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Turvallisuusyll盲pit盲j盲:"
+msgid "Wait please"
+msgstr "Odota hetki"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Turvavaroitukset:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Turvataso:"
+msgid "Backup user files"
+msgstr "Varmuuskopioi k盲ytt盲j盲tiedostot"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(oletusarvo: %s)"
+msgid "New"
+msgstr "Uusi"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
-"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Vakio: T盲m盲 on vakio turvallisuustaso, jota suositellaan "
-"tietokoneelle \n"
-" joka yhdistet盲盲n Internettiin asiakaskoneena.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Korkea: Joitakin turvallisuusrajoituksia on jo k盲yt枚ss盲, ja "
-"enemm盲n \n"
-" automaattisia tarkistuksia suoritetaan joka y枚.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Korkeampi: Turvallisuustaso on nyt riitt盲v盲n korkea jotta j盲rjestelm盲n\n"
-" k盲ytt枚 palvelimena, joka voi palvella useaa k盲ytt盲j盲盲, on \n"
-" j盲rkev盲盲. Jos konettasi k盲ytet盲盲n ainoastaan asiakaskoneena\n"
-" Internetiss盲 suosittelemme matalampaa turvatasoa.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Vainoharhainen: T盲m盲 on samankaltainen kuin edellinen taso, mutta "
-"j盲rjestelm盲\n"
-" on kokonaan suljettu, ja turvallisuusominaisuudet ovat\n"
-" korkeimmillaan.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Turvallisuusyll盲pit盲j盲:\n"
-" Jos 'Turvavaroitukset' -optio on valittu, n盲m盲 varoitukset\n"
-" l盲hetet盲盲n t盲lle k盲ytt盲j盲lle (k盲ytt盲j盲nimi tai s盲hk枚posti)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"T盲m盲 on t盲rkein p盲盲t枚s joka koskee GNU/Linux-j盲rjestelm盲si turvallisuutta:\n"
+"sinun pit盲盲 sy枚tt盲盲 \"root\" salasana. \"Root\" on j盲rjestelm盲n yll盲pit盲j盲\n"
+"ja ainoa, jolla on oikeudet p盲ivitt盲盲 j盲rjestelm盲盲, lis盲t盲 k盲ytt盲ji盲, "
+"muuttaa\n"
+"j盲rjestelm盲n asetuksia jne. Lyhyesti, \"root\" voi tehd盲 mit盲 vain! T盲m盲n\n"
+"vuoksi sinun pit盲盲 valita salasana joka on vaikea arvata - DrakX kertoo\n"
+"sinulle jos salasana on liian helppo. Kuten huomaat, voit j盲tt盲盲 salasanan\n"
+"sy枚tt盲m盲tt盲, mutta suosittelemme ettet tee niin, ainakin yhdest盲 syyst盲:\n"
+"GNU/Linux on yht盲 altis k盲ytt盲j盲n virheille kuin muutkin "
+"k盲ytt枚j盲rjestelm盲t.\n"
+"Koska \"root\" voi ohittaa kaikki rajoitukset ja vahingossa poistaa kaikki\n"
+"tiedot osioilta on t盲rke盲盲, ett盲 on vaikea p盲盲st盲 \"root\"-k盲ytt盲j盲ksi.\n"
+"\n"
+"Salasanan pit盲isi koostua aakkosista ja numeroista sek盲 olla v盲hint盲盲n\n"
+"8 merkki盲 pitk盲. 脛l盲 koskaan kirjoita \"root\" salasanaa paperille - se\n"
+"tekisi j盲rjestelm盲盲n murtautumisesta liian helppoa.\n"
"\n"
+"脛l盲 my枚sk盲盲n valitse liian pitk盲盲 tai monimutkaista salasanaa koska sinun\n"
+"pit盲盲 my枚s muistaa se ongelmitta.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"Salasanaa ei n盲ytet盲 kun sy枚t盲t sit盲 ja t盲st盲 syyst盲 sinun pit盲盲 sy枚tt盲盲\n"
+"se kahdesti, jolla pyrit盲盲n ehk盲isem盲盲n kirjoitusvirheit盲. Jos sattumalta\n"
+"teet saman kirjoitusvirheen kahdesti, joudut k盲ytt盲m盲盲n t盲t盲 ``v盲盲r盲盲''\n"
+"salasanaa ensimm盲isess盲 sis盲盲nkirjautumisessa.\n"
"\n"
+"Jos haluat ett盲 p盲盲sy盲 t盲h盲n koneeseen hallitaan tunnistuspalvelimen\n"
+"kautta, paina \"%s\"-painiketta.\n"
"\n"
+"Jos verkkosi k盲ytt盲盲 LDAP, NIS tai PDC Windows verkkoalueen tunnistus-\n"
+"palvelua, valitse oikea \"%s\" vaihtoehto. Jos sinulla ei ole\n"
+"tietoa, kysy verkon yll盲pit盲j盲lt盲.\n"
"\n"
-"Huomaa: Jos sinulla on ISA PnP 盲盲nikortti, sinun pit盲盲 k盲ytt盲盲 sndconfig "
-"ohjelmaa. Eli kirjoita \"sndconfig\" konsolissa."
+"Jos sinulla on ongelmia muistaa salasanoja, tai jos koneesi ei ole\n"
+"yhteydess盲 Internetiin, tai jos uskot kaikkiin koneesi k盲ytt盲jiin, voit "
+"valita\n"
+"\"%s\"."
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Yht盲k盲盲n 盲盲nikorttia ei l枚ydetty koneestasi. Varmista, ett盲 Linux-tuettu "
-"盲盲nikortti on kytketty oikein.\n"
-"\n"
-"\n"
-"Voit katsoa meid盲n laitteistotietokantaa osoitteesta:\n"
-"\n"
+"T盲ss盲 vaiheessa DrakX sallii sinun valita tietokoneellesi sopivan\n"
+"turvatason. Yleisesti mit盲 enemm盲n t盲rke盲盲 tietoa on tallennettu\n"
+"koneellesi, tai jos se on kytketty Internetiin, sit盲 korkeampi turvatason\n"
+"pit盲isi olla. Huomaa kuitenkin, ett盲 korkeampi turvallisuustaso\n"
+"saavutetaan yleens盲 k盲ytett盲vyyden kustannuksella.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "脛盲nikorttia ei l枚ydetty!"
+"Jos et tied盲 mit盲 valita, k盲yt盲 oletuksena olevaa vaihtoehtoa."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) esikatselu"
+msgid "Load from floppy"
+msgstr "Lataa levykkeelt盲"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Luodaan esikatselu ..."
+msgid "The following printer was auto-detected. "
+msgstr "Seuraava tulostin tunnistettiin automaattisesti. "
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Sinun pit盲盲 valita kuvatiedosto ensin!"
+msgid "Boot Floppy"
+msgstr "K盲ynnistyslevyke"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "Edistymispalkin v盲rivalinta"
+msgid "Norwegian"
+msgstr "Norja"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "T盲lle teemalle ei olemassa yht盲盲n bootsplashia kohdassa %s !"
+msgid "Searching for new scanners ..."
+msgstr "Etsit盲盲n uusia kuvanlukijoita ..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "tallennan Bootsplash teeman..."
+msgid "Apache World Wide Web Server"
+msgstr "Apache WWW-palvelin"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "valitse kuvatiedosto"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "prosessorin askel (alamalli (sukupolvi) numero)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "valitse kuva"
+msgid "select path to restore (instead of /)"
+msgstr "valitse polku, johon palautat (juurihakemiston sijaan)"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Aseta bootsplash kuvaa"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Aseta ytimen viestit hiljaiseksi oletuksena"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "N盲yt盲 logo konsolissa"
+msgid "China"
+msgstr "Kiina"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "Valitse v盲ri"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Varmista ett盲 kaikki tulostimesi on liitetty ja kytketty p盲盲lle).\n"
-# Asennuksen sivuvalikko
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "Tallenna teema"
+msgid "Georgia"
+msgstr "Georgia"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "Esikatselu"
+msgid "Reading data of installed printers..."
+msgstr "Haetaan asennettuja tulostimia..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "edistymispalkin v盲ri"
+msgid " Erase Now "
+msgstr " Tyhjenn盲 nyt "
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "edistymispalkin korkeus"
+msgid "server"
+msgstr "palvelin"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "edistymispalkin leveys"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Aseta tyhj盲 FAT-alustettu levyke levykeasemaan %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"edistymispalkin y-kordinaatti\n"
-"(vasen yl盲kulma)"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "kyll盲 tarkoittaa ett盲 prosessorilla on laskentaprosessori"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"edistymispalkin x-kordinaatti\n"
-"(vasen yl盲kulma)"
+msgid "Please Wait... Applying the configuration"
+msgstr "Odota hetki... Otetaan asetukset k盲ytt枚枚n"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "tekstiruudun korkeus"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Tervetuloa GRUB k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "tekstiruudun leveys"
+msgid "Grub"
+msgstr "GRUB"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"tekstiruudun y-koordinaatti\n"
-"m盲盲r盲 merkeiss盲"
+msgid "SCSI controllers"
+msgstr "SCSI-ohjaimet"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"tekstiruudun x-koordinaatti\n"
-"m盲盲r盲 merkeiss盲"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " LPD-palvelimella \"%s\", tulostin \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Selaa"
+msgid "Choosing a display manager"
+msgstr "N盲yt枚nhallinnan valitseminen"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "Teeman nimi"
+msgid "Zeroconf Host name"
+msgstr "Zeroconf konenimi"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "lopullinen tarkkuus"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP-osoitteen tulee olla muotoa 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "ensiaskeleen luominen"
+msgid "Ecuador"
+msgstr "Ecuador"
-#: ../../standalone/draksplash:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"paketti 'ImageMagick' vaaditaan jotta kaikki toimisi oikein.\n"
-"Paina \"Ok\" asentaaksesi 'ImageMagick\" tai \"Peruuta\" lopettaaksesi."
+msgid "Add an item"
+msgstr "Lis盲盲 alkio"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Yht盲k盲盲n TV-korttia ei l枚ydetty koneestasi. Varmista, ett盲 Linux-tuettu "
-"Video/TV-kortti on kytketty oikein.\n"
-"\n"
-"\n"
-"Voit katsoa meid盲n laitteistotietokantaa osoitteesta:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Tulostimet t盲ss盲 koneessa ovat muiden koneiden k盲ytett盲viss盲"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Yht盲k盲盲n TV-korttia ei l枚ydetty."
+msgid "I can't find needed image file `%s'."
+msgstr "Tarvittavaa kuvatiedostoa `%s' ei l枚ytynyt."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nyt voit k盲ytt盲盲 xavtv:a (X-ikkunointij盲rjestelm盲ss盲si!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"Yht盲k盲盲n 盲盲nikorttia ei l枚ydetty. Kokeile \"harddrake\" asennuksen j盲lkeen"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Hyv盲盲 p盲iv盲njatkoa!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Virheellinen portti annettu: %s.\n"
+"Oikea muoto on \"portti/tcp\" tai \"portti/udp\",\n"
+"jossa portti on 1 ja 65535 v盲lill盲."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ei ole asennettuna!"
+msgid "Shell"
+msgstr "Komentotulkki"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Tapahtui virhe TV-kanavien haun aikana"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Haetaan TV-kanavia"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome ja Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "TV-kanavien haku k盲ynniss盲 ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "En voi kirjoittautua k盲ytt盲j盲tunnuksella: %s (v盲盲r盲 salasana?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Alue :"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjani"
-#: ../../standalone/drakxtv:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "TV-normi :"
+msgid "Package not installed"
+msgstr "Pakettia ei asennettu"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Ole hyv盲,\n"
-"kirjoita k盲ytt盲m盲si tv-normi sek盲 asuinmaa"
+msgid "Become a MandrakeExpert"
+msgstr "Tule MandrakeExpert asiantuntijaksi"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australian Optus cable TV"
+msgid "American Samoa"
+msgstr "Amerikan Samoa"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "Uusi-Seelanti"
+msgid "Protocol"
+msgstr "Protokolla"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "Ranska [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "Kopioi kirjasimet j盲rjestelm盲盲si"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "It盲-Eurooppa"
+msgid "Harddrake help"
+msgstr "Harddrake ohje"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "L盲nsi-Eurooppa"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Kiina (bcast)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Mandrake Terminal Server Asetus"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japani (kaapeli)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup-raportin yksityiskohdat\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japani (bcast)"
+msgid "Restore all backups"
+msgstr "Palauta kaikki varmuuskopiot"
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kaapeli)"
+msgid "if set to yes, check open ports."
+msgstr "jos asetettu, tarkistetaan avoimet portit."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "Yhdysvallat (hrc-kaapeli)"
+msgid "This may take a moment to erase the media."
+msgstr "Median tyhjent盲minen voi kest盲盲 hetken."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "Yhdysvallat (kaapeli)"
+msgid "You can't select/unselect this package"
+msgstr "Et voi valita/poistaa t盲t盲 pakettia"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "Yhdysvallat (bcast)"
+msgid "Warning"
+msgstr "Varoitus"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV ei ole asennettuna!\n"
"\n"
-"\n"
-"Jos sinulla on TV-kortti, mutta DrakX ei tunnistanut sit盲 (ei bttv eik盲 \n"
-"saa713 moduulia tiedostossa \"/etc/modules\") eik盲 asentanut xawtv:t盲, \n"
-"l盲het盲 \"lspcidrake -v -f\" tuloste osoitteeseen \"install\\@mandrakesoft."
-"com\n"
-"otsikolla \"undetected TV card\".\n"
-"\n"
-"\n"
-"Voit asentaa sen kirjoittamalla \"urpmi xawtv\" p盲盲k盲ytt盲j盲n盲 konsolissa."
+"- Muut tiedostot:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "ensisijainen"
+msgid "Remote host name"
+msgstr "Et盲koneen verkkonimi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "toissijainen"
+msgid "deactivate now"
+msgstr "deaktivoi nyt"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Valitse laite vasemmalla olevasta puusta n盲hd盲ksesi sen tiedot t盲盲ll盲."
+msgid "access to X programs"
+msgstr "oikeudet X-ohjelmiin"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Tuntematon"
+msgid "Computing the size of the Windows partition"
+msgstr "Lasken Windows-osion kokoa"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "tuntematon"
+msgid "Italy"
+msgstr "Italia"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Suoritetaan \"%s\" ..."
+msgid "Name of printer"
+msgstr "Tulostimen nimi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "Suorita asetusty枚kalu"
+msgid "disable"
+msgstr "poista k盲yt枚st盲"
-# Asennuksen sivuvalikko
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Aseta moduuli"
+msgid "error unmounting %s: %s"
+msgstr "virhe irrotettaessa %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Tiedot"
+msgid "Do it!"
+msgstr "Tee se!"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Tunnistettu laitteisto"
+msgid "Cayman Islands"
+msgstr "Caymansaaret"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 versio "
+msgid "%s not responding"
+msgstr "%s ei vastaa"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "Tunnistus k盲ynniss盲 ..."
+msgid "Select model manually"
+msgstr "Valitse malli manuaalisesti"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Tekij盲:"
+msgid "Format"
+msgstr "Alusta"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"T盲m盲 on HardDrake, Mandraken laitteistonasetusty枚kalu.\n"
-"Versio: "
+"Yleisin tapa liitty盲 adsl-verkkoon on k盲ytt盲盲 pppoe:a.\n"
+"Jotkin yhteydet k盲ytt盲v盲t pptp:t盲, muutamat dhcp:t盲.\n"
+"Jos et tied盲 mit盲 valita, valitse 'k盲yt盲 pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "Tietoja Harddrake:sta"
+msgid "Various"
+msgstr "Useita"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_Tietoja..."
+msgid "Zip"
+msgstr "Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Raportoi virheest盲"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Printerdrake ei tunnistanut mit盲 mallia tulostimesi %s on. Ole hyv盲 ja "
+"valitse oikea malli listasta."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Kunhan olet valinnut laitteen, n盲et kuvauksen oikealla n盲kyv盲ss盲 kehyksess盲 "
-"(\"Tiedot\")"
+"\n"
+"Merkitse tulostimet jotka haluat siirt盲盲 ja paina \n"
+"\"Siirr盲\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "Valitse laite !"
+msgid "PDQ"
+msgstr "PDQ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albaani"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Liettua"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Tiivis"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Tunnistettu malli: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft on valinnut parhaat ohjelmat sinulle"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
+msgstr ""
+"T盲m盲 on HardDrake, Mandraken laitteistonasetusty枚kalu.\n"
+"Versio: %s\n"
+"Tekij盲: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
-msgstr "Kenttien kuvaus:\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake ohje"
+msgid "Local files"
+msgstr "Paikalliset tiedostot"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Kenttien kuvaus"
+msgid "maybe"
+msgstr "ehk盲"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/O_hje"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Lopeta"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"N盲ytt盲盲 silt盲 ett盲 n盲yt枚nohjaimessasi on TV-ulostuloliit盲nt盲.\n"
+"Se voidaan asettaa toimimaan n盲ytt枚puskurin kanssa.\n"
+"\n"
+"Saadaksesi t盲m盲n toimimaan, sinun pit盲盲 kytke盲 n盲yt枚nohjaimesi\n"
+"televisioon ennen kuin k盲ynnist盲t tietokoneesi. Valitse sitten \"TV-Out\"\n"
+"valinta k盲ynnistysvalikossa.\n"
+"\n"
+"Onko sinulla t盲m盲 ominaisuus?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/_Jazz asemien automaattitunnistus"
+msgid "Monitor"
+msgstr "N盲ytt枚"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/_Modeemien automaattitunnistus"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Olet asettamassa tulostamista Windows tiliin salasanan kanssa. Samban "
+"asiakasohjelmiston arkkitehtuurissa olevan virheen takia salasana sy枚tet盲盲n "
+"selkokielisen盲 komentoriviin, jolla Samba-asiakas l盲hett盲盲 tulostusty枚n "
+"Windows-palvelimelle. Joten t盲m盲n koneen jokaisella k盲ytt盲j盲ll盲 on "
+"mahdollisuus n盲hd盲 tuo salasana n盲yt枚ll盲 k盲ytt盲m盲ll盲 komentoa: \"ps auxwww"
+"\".\n"
+"\n"
+"Suosittelemme k盲ytt盲m盲盲n jotain seuraavista vaihtoehdoista (kaikissa "
+"vaihtoehdoissa sinun pit盲盲 varmistua siit盲 ett盲 ainoastaan paikallisverkon "
+"k盲ytt盲j盲t voivat k盲ytt盲盲 Windows-palvelintasi, esimerkiksi k盲ytt盲m盲ll盲 "
+"palomuuria):\n"
+"\n"
+"K盲yt盲 salasanasuojatonta tili盲 Windows-palvelimellasi, joko \"VIERAS\" tili盲 "
+"tai tulostamiseen omistettua tili盲. 脛l盲 poista salasanaa henkil枚kohtaisesta "
+"tilist盲 tai j盲rjestelm盲valvojan tililt盲.\n"
+"\n"
+"Aseta Windows-palvelimesi jakamaan tulostinta LPD-protokollan kautta. Aseta "
+"sen j盲lkeen tulostus t盲st盲 koneesta k盲ytt盲m盲ll盲 \"%s\" yhteystyyppi盲 "
+"Printerdrake:ssa.\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/_Tulostimien automaattitunnistus"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 tuhatta v盲ri盲 (16 bitti盲)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Optiot"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Tallenna kiintolevylle polulle: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "prosessorin valmistaja"
+msgid "Size: %d KB\n"
+msgstr "Koko: %d kt\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "laitteen valmistaja"
+msgid "Remove fonts on your system"
+msgstr "Poista j盲rjestelm盲ss盲si olevia kirjasimia"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "V盲yl盲tyyppi johon hiiri on liitetty"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Varoitus, verkkokortti (%s) on jo asetettu.\n"
+"\n"
+"Haluatko automaattisen uudelleenasetuksen?\n"
+"\n"
+"Voit asettaa sen my枚s manuaalisesti, mutta silloin sinun pit盲盲 tiet盲盲, mit盲 "
+"olet tekem盲ss盲."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "prosessorin askel (alamalli (sukupolvi) numero)"
+msgid "Graphical interface at startup"
+msgstr "Graafinen tila k盲ynnistyksess盲"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Malli askel"
+msgid "Please enter the directory to save:"
+msgstr "Sy枚t盲 hakemisto, johon tallennetaan:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Levykkeiden eri muodot joita asema tukee"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "prosessorin numero"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ei riitt盲v盲sti osioita RAID tasolle %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Prosessorin ID"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Seuraavat tulostimet ovat asetettuja. Tuplaklikkaa tulostinta muuttaaksesi "
+"sen asetuksia; asettaaksesi sen oletustulostimeksi; n盲hd盲ksesi tulostimen "
+"tiedot;"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "verkkotulostimen portti"
+msgid "Connected"
+msgstr "Yhteys muodostettu"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "Prosessorin nimi (CPU)"
+msgid "USB printer \\#%s"
+msgstr "USB-tulostin \\#%s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "Nimi"
+msgid "Macedonian"
+msgstr "Makedonia"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "hiiren painikkeiden m盲盲r盲"
+msgid "Bridges and system controllers"
+msgstr "Sillat ja j盲rjestelm盲ohjaimet"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "Painikkeiden m盲盲r盲"
+msgid "/File/_Save"
+msgstr "/Tiedosto/_Tallenna"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Prosessorin valmistajan virallinen nimi"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "Mallinimi"
+msgid "No details"
+msgstr "Ei yksityiskohtia"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Prosessorin sukupolvi (esim.: Pentium III on 8, ...)"
+msgid "very nice"
+msgstr "eritt盲in hyv盲"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Malli"
+msgid "Preview"
+msgstr "Esikatselu"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "kovalevyn malli"
+msgid "Remote Control"
+msgstr "Kauko-ohjaus"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "rautatason laiteluokka"
+msgid "Please select media for backup..."
+msgstr "Valitse varmuuskopioinnissa k盲ytett盲v盲 media..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "Media luokka"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 palvelin: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Prosessorin alasukupolvi"
+msgid "Allow Thin Clients"
+msgstr "Salli kevyet asiakkaat"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Taso"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgia (\"Ven盲l盲inen\"-j盲rjestys)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Levykkeiden eri muodot joita asema tukee"
+msgid "/_Options"
+msgstr "/_Optiot"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Levykkeen muoto"
+msgid "Your printer model"
+msgstr "Tulostimesi malli "
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"Jotkut aikaisimmista i486DX-100 prosessoreista eiv盲t osaa luotettavasti "
-"palata k盲ytt枚tilaan \"halt\" k盲skyn j盲lkeen"
+"\n"
+"\n"
+"(VAROITUS! k盲yt盲t XFS:盲 juuriosiollesi,\n"
+"k盲ynnistyslevykkeen luominen 1.44 Mt levykkeelle\n"
+"todenn盲k枚isesti ep盲onnistuu, koska XFS tarvitsee\n"
+"eritt盲in kookkaan ajurin)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Halt virhe"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Poista tar tiedostot kovalevylt盲 varmistuksen j盲lkeen.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Ensimm盲iset pentiumprosessorit olivat virheellisi盲 ja jumiutuivat "
-"purettaessa F00F tavukoodia"
+"CD- tai DVD-kuvaa ei l枚ydy, ole hyv盲 ja kopioi asennusohjelma ja rpm-"
+"tiedostot."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "F00f bug"
-msgstr "F00F virhe"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Mandraken monitoiminen asetusty枚kalu"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "kyll盲 tarkoittaa ett盲 laskentaprosessorista l枚ytyy poikkeusvektori"
+msgid "Save"
+msgstr "Tallenna"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "L枚ytyyk枚 irq-vektori FPU:sta"
+msgid "The %s is unsupported"
+msgstr "T盲m盲 %s kuvanlukija ei ole tuettu"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "kyll盲 tarkoittaa ett盲 prosessorilla on laskentaprosessori"
+msgid "Load the drivers for your usb devices."
+msgstr "Lataa USB-laitteiden ajurit."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "L枚ytyyk枚 FPU"
+msgid "Disk"
+msgstr "Levy"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter a printer device URI"
+msgstr "Sy枚t盲 tulostinlaitteen osoite (URI)"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Varhaisimmista Intel Pentium prosessorien liukulukuyksik枚st盲 l枚ytyy virhe, "
-"joka heikent盲盲 tarkkuutta kun suoritetaan liukuluvun jakoa (FDIV)"
+"MandrakeSoft:n menestys perustuu Vapaan Ohjelmiston periaatteeseen. Uusi "
+"k盲ytt枚j盲rjestelm盲si on maailmanlaajuisen Linux Yhteis枚n yhteisty枚n tulos."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv virhe"
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "ytimen raportoimat prosessorin liput"
+msgid "French Guiana"
+msgstr "Ranska, Guayana"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Liput"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "GNU/Linux ytimen moduuli joka k盲sittelee kyseist盲 laitetta"
+msgid "add a rule"
+msgstr "Lis盲盲 s盲盲nt枚"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "Moduuli"
+msgid "A command line must be entered!"
+msgstr "Komentorivi pit盲盲 sy枚tt盲盲!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "uusi dynaaminen laitenimi, luotu ytimen sis盲isen devfs:n toimesta"
+msgid "Select user manually"
+msgstr "Valitse k盲ytt盲j盲t yksitellen"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Uusi devfs laite"
+msgid "Transfer printer configuration"
+msgstr "Siirr盲 tulostimen asetukset"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "vanha staattinen laitenimi jota on k盲ytetty dev-paketissa"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Haluatko mahdollistaa tulostamisen yll盲 mainituissa tulostimissa?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Vanha laitetiedosto"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"Jotta t盲m盲 toimisi W2K PDC kanssa, sinun pit盲盲 todenn盲k枚isesti pyyt盲盲 sen "
+"j盲rjestelm盲valvojaa suorittamaan: C:\\>net localgroup \"Pre-Windows 2000 "
+"Compatible Access\" everyone /add ja k盲ynnist盲m盲盲n palvelin uudelleen.\n"
+"Tarvitset my枚s verkkoalueen yll盲pit盲j盲n tunnusta liitt盲盲ksesi koneesi Windows"
+"(TM) verkkoalueeseen.\n"
+"Jos verkkoa ei ole viel盲 asetettu, DrakX yritt盲盲 liitty盲 verkkoalueeseen kun "
+"verkon asetusvaihe on tehty.\n"
+"Jos t盲m盲 asetus ep盲onnistuu jostain syyst盲 ja verkkoalueen tunnistus ei "
+"toimi, suorita: 'smbpasswd -j VERKKOALUE -U K脛YTT脛J脛%%SALASANA' k盲ytt盲en "
+"Windows verkkoaluetta ja verkkoalueen yll盲pit盲j盲n tunnusta/salasanaa "
+"k盲ynnistyksen j盲lkeen.\n"
+"Komento 'wbinfo -t' tarkistaa jos tunnistuksen salaisuuksia ovat kunnossa."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "T盲m盲 kentt盲 kuvaa laitteen"
+msgid "%s (Port %s)"
+msgstr "%s (portti %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "K盲yt盲 verkkoyhteytt盲 varmuuskopiointiin"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"Prosessorin taajuus MHz:in盲 (Megahertzi盲 voidaan ensisilm盲yksell盲 karkeasti "
-"verrata teht盲vien m盲盲r盲盲n jotka prosessori suorittaa sekunnissa)"
+"Parametrit: (arg)\n"
+"\n"
+"Ota k盲ytt枚枚n / Poista k盲yt枚st盲 sulogin(8) yhden k盲ytt盲j盲n tasossa."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Taajuus (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Nyt on aika valita mit盲 ohjelmia haluat asentaa j盲rjestelm盲盲si. Tarjolla\n"
+"on tuhansia paketteja Mandrake Linux jakelussa, ja pakettien\n"
+"hallinnan helpottamiseksi ne on koottu samanlaisten ohjelmistojen\n"
+"ryhmiin.\n"
+"\n"
+"Paketit on ryhmitelty ryhmiin koneesi k盲ytt枚tarkoituksen mukaisesti.\n"
+"Mandrake Linux sis盲lt盲盲 nelj盲 eri ennakkoon m盲盲ritelty盲 asennustapaa.\n"
+"Voit verrata asennustapoja pakettiryhmiin. Voit tietysti asentaa paketteja\n"
+"eri ryhmist盲 niin halutessasi, joten ``Ty枚asema''-asennus voi sis盲lt盲盲\n"
+"ohjelmia esimerkiksi ``Kehitysymp盲rist枚''-ryhm盲st盲.\n"
+"\n"
+" * \"%s\": Jos aiot k盲ytt盲盲 konettasi ty枚asemana, valitse yksi tai\n"
+"useampi ohjelma t盲st盲 ryhm盲st盲;\n"
+"\n"
+" * \"%s\": Jos konettasi aiotaan k盲ytt盲盲 ohjelmakehitykseen,\n"
+"valitse yksi tai useampi haluttu paketti t盲st盲 ryhm盲st盲;\n"
+"\n"
+" * \"%s\": Jos koneesi on tarkoitettu toimimaan palvelimena'\n"
+"valitse yksi tai useampi haluttu palvelu tai palvelinohjelma t盲st盲\n"
+"ryhm盲st盲;\n"
+"\n"
+" * \"%s\": t盲盲lt盲 valitset haluamasi graafisen ymp盲rist枚n.\n"
+"Ainakin yksi pit盲盲 olla valittu jos haluat graafisen ty枚aseman!\n"
+"\n"
+"Jos siirr盲t hiiren kohdistinta ryhm盲nimen yl盲puolella, lyhyt selostus\n"
+"ryhm盲n sis盲ll枚st盲 tulee n盲kyviin. Jos poistat kaikki ryhm盲valinnat kun\n"
+"teet tavallisen asennuksen (p盲ivityksen sijasta), esille tulee dialogi,\n"
+"joka ehdottaa kolmea eri optiota v盲himm盲isasennukseen:\n"
+"\n"
+" * \"%s\": asenna vain tarvittavat paketit, joilla saat\n"
+"toimivan graafisen ty枚p枚yd盲n;\n"
+"\n"
+" * \"%s\": asentaa perusj盲rjestelm盲n ja\n"
+"perusty枚kalut sek盲 niiden dokumentaatiot. T盲m盲 valinta sopii\n"
+"palvelinasennukseen;\n"
+"\n"
+" * \"%s\": asentaa ainoastaan tarvittavat osat\n"
+"saadaksesi toimivan komentorivipohjaisen Linux-j盲rjestelm盲n.\n"
+"T盲m盲 asennus vie vain noin 65 Mt tilaa.\n"
+"\n"
+"Voit valita \"%s\" jos tarjolla olevat\n"
+"paketit ovat tuttuja sinulle tai jos haluat t盲ydellisen\n"
+"hallinnan asennettaviin paketteihin.\n"
+"\n"
+"Jos aloitit asennuksen \"%s\"-tilassa, voit poistaa kaikkien\n"
+"ryhmien valinnat v盲ltt盲盲ksesi uusien pakettien asentamisen.\n"
+"T盲m盲 on hy枚dyllist盲 jos haluat korjata tai p盲ivitt盲盲 olemassa\n"
+"olevaa j盲rjestelm盲盲."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Tietotaso joka voidaan saada cpuid-k盲skyn kautta"
+msgid "Accept user"
+msgstr "Hyv盲ksy k盲ytt盲j盲"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid-taso"
+msgid "Server"
+msgstr "Palvelin"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Prosessoriperhe (esim. i686 luokka on 6)"
+msgid "Bad choice, try again\n"
+msgstr "Huono valinta, yrit盲 uudelleen\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid-perhe"
+msgid "Heard and McDonald Islands"
+msgstr "Heard ja McDonaldinsaaret"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "L枚ytyyk枚 t盲st盲 prosessorista Cyrix 6x86 Coma -virhe "
+msgid "No alternative driver"
+msgstr "Ei vaihtoehtoista ajuria"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Coma-virhe"
+msgid "Toggle to expert mode"
+msgstr "Vaihda Asiantuntija-tilaan"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "erikoisominaisuudet ajurissa (polttomahdollisuus ja/taiDVD tuki)"
+msgid "(on this machine)"
+msgstr "(t盲ll盲 koneella)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Aseman kapasiteetti"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Yhdysk盲yt盲v盲n osoite pit盲盲 olla muotoa 1.2.3.4"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Prosessorin (kakkostason) v盲limuistin koko"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+"\"%s\" perustuva winmodeemi tunnistettu, haluatko asentaa tarvittavat "
+"ohjelmistot?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "V盲limuistin koko"
+msgid "Looking at packages already installed..."
+msgstr "Etsin jo asennettuja paketteja..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- pci-laitteet: t盲m盲 kertoo PCI-korttipaikan, laitteen sek盲 kortin "
-"toiminnon\n"
-"- eide laitteet: t盲m盲 laite on joko orja- tai is盲nt盲laite\n"
-"- scsi laitteet: scsi-v盲yl盲 sek盲 scsi-laitteiden id:t"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "Sijainti v盲yl盲ss盲"
+msgid "Driver"
+msgstr "Ajurit"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- PCI- ja USB-laitteet: t盲m盲 listaa valmistajan, laitteen, alivalmistajan ja "
-"alilaitteen PCI/USB id:t"
+"Linuxconf j盲rjest盲盲 joskus aikaa erilaisten teht盲vien hoitamiseen\n"
+"k盲ynnistyksen aikana pit盲盲kseen yll盲 j盲rjestelm盲n asetuksia."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "V盲yl盲n tunniste"
+msgid "Printer on remote lpd server"
+msgstr "Tulostin et盲palvelimella (lpd)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"GNU/Linuxin ytimen t盲ytyy suorittaa laskentasilmukka k盲ynnistyksen "
-"yhteydess盲 ajastimen alustamiseksi. Tulos tallennetaan bogomipsein盲, joka on "
-"tapa mitata prosessorin suorituskyky盲."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Ennen kuin asennat uusia kirjasimia, varmista ett盲 sinulla on oikeudet "
+"k盲ytt盲盲 ja asentaa ne j盲rjestelm盲盲si.\n"
+"\n"
+"- Voit asentaa kirjasimet perinteisell盲 tavalla. Harvoissa tapauksissa bogus-"
+"kirjasimet voivat lukita X-palvelimen."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI-kanava"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot on k盲ynnistyslataaja NewWorld MacIntosh laitteistolle. Se osaa\n"
+"k盲ynnist盲盲 GNU/Linuxin, MacOS:n tai MacOSX:n jos ne l枚ytyv盲t koneestasi.\n"
+"Yleens盲 n盲m盲 muut k盲ytt枚j盲rjestelm盲t tunnistetaan oikein ja asetetaan\n"
+"k盲ynnistyslataajan valikkoon. Jos n盲in ei tapahdu, voit t盲ss盲 lis盲t盲\n"
+"tietueen k盲sin. Varmista ett盲 valitset oikeat parametrit.\n"
+"\n"
+"Yabootin p盲盲optiot ovat:\n"
+"\n"
+" * K盲ynnistysviesti: yksinkertainen tekstiviesti joka n盲ytet盲盲n ennen\n"
+"k盲ynnistyskehotetta;\n"
+"\n"
+" * K盲ynnistyslaite: kertoo mihin haluat asentaa GNU/Linuxin k盲ynnistykseen\n"
+"tarvittavat tiedot. Yleens盲 olet jo asettanut bootstrap-osion t盲h盲n\n"
+"tarkoitukseen;\n"
+"\n"
+" * Open Firmware -viive: eri tavoin kuin LILO, Yabootille l枚ytyy kaksi\n"
+"viivett盲. Ensimm盲inen viive lasketaan sekunneissa jolloin sinulla on\n"
+"mahdollisuus valita CD:n, OF k盲ynnistyksen, MacOS:n ja Linuxin v盲lill盲;\n"
+"\n"
+" * Ytimen k盲ynnistysviive: t盲m盲 viive on vastaava kuin LILO:n k盲ynnistys-\n"
+"viive. Valittuasi Linuxin sinulla on t盲m盲 viive 0.1 sekunnin kertoimella,\n"
+"ennen kuin oletusytimen k盲ynnistys valitaan;\n"
+"\n"
+" * Mahdollista CD-k盲ynnistys?: merkitsem盲ll盲 t盲m盲n option sinun sallitaan\n"
+"valita ``C'' valitaksesi CD-k盲ynnistyksen ensimm盲isess盲\n"
+"k盲ynnistyskehotteessa;\n"
+"\n"
+" * Mahdollista OF-k盲ynnistys?: merkitsem盲ll盲 t盲m盲 optio sinun sallitaan\n"
+"valita ``N'' valitaksesi Open Firmware -k盲ynnistys ensimm盲isess盲\n"
+"k盲ynnistyskehotteessa;\n"
+"\n"
+" * Oletusk盲ytt枚j盲rjestelm盲: voit m盲盲ritt盲盲 mik盲 k盲ytt枚j盲rjestelm盲\n"
+"k盲ynnistet盲盲n oletuksena kun Open Firmware -viive t盲yttyy."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Kanava"
+msgid "No mouse"
+msgstr "Ei hiirt盲"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "t盲m盲 on fyysinen v盲yl盲, johon laite on kytketty (esim PCI, USB, ...)"
+msgid "Germany"
+msgstr "Saksa"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "V盲yl盲"
+msgid "Austria"
+msgstr "It盲valta"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "listaus vaihtoehtoisista ajureista t盲lle 盲盲nikortille"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Suorita \"sndconfig\" asennuksen j盲lkeen asettaaksesi 盲盲nikorttisi."
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Vaihtoehtoiset ajurit"
+msgid "Collapse Tree"
+msgstr "Sulje puu"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Haluatko Askelpalautin-n盲pp盲imen toimivan kuten Delete konsolissa?"
+msgid "Auto Install Configurator"
+msgstr "Automaattisen asennuksen muokkaaja"
-#: ../../standalone/keyboarddrake:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Valitse n盲pp盲imist枚si asettelu."
+msgid "Configure networking"
+msgstr "Verkkoasetukset"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "J盲rjestelm盲n p盲ivityst盲 ei voida aloittaa!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "Minne haluat asentaa k盲ytt枚j盲rjestelm盲n lataajan?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Aseta asennuslevy CD-asemaan ja paina Ok.\n"
-"Jos sinulla ei ole levy盲, paina Peruuta est盲盲ksesi j盲rjestelm盲n p盲ivityksen."
+"Valitsemasi oletuskieli p盲盲tt盲盲 mink盲 kielinen dokumentaatio\n"
+"asennetaan, kuten my枚s asennusohjelman ja j盲rjestelm盲n\n"
+"kielen. Valitse ensin miss盲 asut, ja sitten mit盲 kielt盲 k盲yt盲t.\n"
+"\n"
+"Painamalla \"%s\"-painiketta saat mahdollisuuden valita\n"
+"my枚s muita kieli盲 asennettavaksi ty枚asemallesi. Muiden kielien\n"
+"valitseminen asentaa kielikohtaiset tiedostot j盲rjestelm盲n\n"
+"dokumentoinnista ja ohjelmistoista. Esimerkiksi jos sinulla\n"
+"koneessasi espanjalaisia k盲ytt盲ji盲, valitse suomi (tai englanti)\n"
+"p盲盲kieleksi ja lis盲asetusten puolelta \"%s\".\n"
+"\n"
+"Huomaa, ett盲 voit valita useita ylim盲盲r盲isi盲 kieli盲 tai jopa kaikki\n"
+"valitsemalla \"%s\". Kielituen valinta tarkoittaa k盲盲nn枚ksien,\n"
+"kirjasinten, oikoluku-ohjelmien jne. asentamista kyseiselle\n"
+"kielelle. T盲m盲n lis盲ksi voit valita \"%s\"\n"
+"joka pakottaa j盲rjestelm盲n k盲ytt盲m盲盲n Unicodea (UTF-8). Huomaa\n"
+"kuitenkin ett盲 t盲m盲 on ominaisuus joka on kokeiluvaiheessa.\n"
+"Jos valitset eri kieli盲 jotka tarvitsevat eri koodausta, asennetaan\n"
+"Unicode-tuki t盲st盲 valinnasta huolimatta.\n"
+"\n"
+"Vaihtaaksesi eri kielten v盲lill盲, voit suorittaa \"/usr/bin/localedrake\"\n"
+"\"root\"-k盲ytt盲j盲n盲, jolloin vaihdat koko j盲rjestelm盲n kielt盲, tai\n"
+"tavallisena k盲ytt盲j盲n盲 jolloin vaihdat vain sen k盲ytt盲j盲n vakiokielen."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Vaihda CD-levy盲"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s ei ole tuettu t盲ss盲 Mandrake Linux versiossa."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Muutos on tehty, mutta ottaaksesi sen k盲ytt枚枚n sinun pit盲盲 kirjoittautua ulos"
+msgid "DHCP client"
+msgstr "DHCP-asiakas"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Tallenna nimell盲.."
+msgid "Restoring from file %s failed: %s"
+msgstr "Palautus tiedostosta %s ep盲onnistui: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Sy枚t盲 s盲hk枚postiosoitteesi alla "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "h盲lytyksen asetukset"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Oletko varma ett盲 haluat asettaa tulostuksen t盲ss盲 koneessa?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Saat h盲lytyksen jos kuorma on t盲t盲 arvoa suurempi"
+msgid "New devfs device"
+msgstr "Uusi devfs laite"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "lataa asetukset"
+msgid "ERROR: Cannot spawn %s."
+msgstr "VIRHE: En voi haroittaa %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Saat h盲lytyksen kun jokin valituista palveluista ei ole en盲盲 k盲ynniss盲"
+msgid "Boot Style Configuration"
+msgstr "K盲ynnistystavan asetus"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "service setting"
-msgstr "Palveluiden asettaminen"
+msgid "Automatic time synchronization"
+msgstr "Automaattinen kellon synkronisointi"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd palvelu"
+msgid "Backup files not found at %s."
+msgstr "Varmistustiedostoja ei l枚ydetty kohteesta: %s"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Webmin palvelu"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Kiitos, ett盲 olet valinnut Mandrake Linux 9.1:n"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "SSH-palvelin"
+msgid "Armenian (phonetic)"
+msgstr "Armeenia (foneettinen)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Samba palvelin"
+msgid "Card model:"
+msgstr "Kortin malli:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix - postipalvelin"
+msgid "Thin Client"
+msgstr "Kevyt asiakas"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ftp Server"
-msgstr "FTP palvelin"
+msgid "Start Server"
+msgstr "K盲ynnist盲 palvelin"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Verkkoalueen nimiratkaisija"
+msgid "Turkmenistan"
+msgstr "Turkmenistan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache WWW-palvelin"
+msgid "All remote machines"
+msgstr "Kaikki et盲koneet"
-#: ../../standalone/logdrake:1
+# Asennuksen sivuvalikko
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Install themes"
+msgstr "Asenna teemoja"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Tervetuloa s盲hk枚postin asetusty枚kaluun.\n"
-"\n"
-"T盲盲lt盲 voit asettaa h盲lytysj盲rjestelm盲n.\n"
+" P盲ivitykset 2002 MandrakeSoft\n"
+" Tekij盲: Stew Benedict <sbenedict\\@mandrakesoft.com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Postih盲lytyksen asetukset"
+msgid "Espanol"
+msgstr "espanja"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Postih盲lytys"
+msgid "Preparing installation"
+msgstr "Valmistelen asennusta"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "odota hetki, j盲senn盲n tiedostoa: %s"
+msgid "Edit selected host/network"
+msgstr "Muokkaa valittua konetta/verkkoa"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Tiedoston sis盲lt枚"
+msgid "Add User -->"
+msgstr "Lis盲盲 k盲ytt盲j盲 -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Kalenteri"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Valitse tiedosto"
+msgid "True Type fonts installation"
+msgstr "True Type -kirjasimien asennus"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "mutta ei t盲sm盲盲"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Tunnista automaattisesti paikallisverkkoon liitetyt tulostimet"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "t盲sm盲盲"
+msgid "LAN configuration"
+msgstr "L盲hiverkon asetukset"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Asetukset"
+msgid "hard disk model"
+msgstr "kovalevyn malli"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ty枚kalu lokien seuraamiseen"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Et voi k盲ytt盲盲 LVM loogista taltiota liitepisteelle %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "etsi"
+msgid "Get Windows Fonts"
+msgstr "Hae Windowsin kirjasimet"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Mandraken ty枚kalujen selitykset"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "J盲rjestelm盲loki"
+msgid "Iranian"
+msgstr "Iran"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Viestit"
+msgid "Croatia"
+msgstr "Kroatia"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "K盲ytt盲j盲"
+msgid "Gateway:"
+msgstr "Yhdysk盲yt盲v盲:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Ohje/_Tietoja..."
+msgid "Add server"
+msgstr "Lis盲盲 palvelin"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Asetukset/Testaa"
+msgid "Remote printer name"
+msgstr "Et盲tulostimen nimi"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Tiedosto/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft on suunnitellut erityiset ty枚kalut luodakseen turvallisimman "
+"Mandrake Linux -jakelun t盲h盲n sakka: Draksec, j盲rjestelm盲n turvallisuuden "
+"hallintaty枚kalu, ja tehokas palomuuri yhdistettyn盲 v盲hent盲盲 oleellisesti "
+"hakkeroinnin vaaraa."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Tiedosto/Tallenna _nimell盲"
+msgid "Device: "
+msgstr "Laite: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Tiedosto/_Tallenna"
+msgid "License agreement"
+msgstr "K盲ytt枚oikeussopimus"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "J盲rjestelm盲optiot"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Tiedosto/_Avaa"
+msgid "Please enter the directory where backups are stored"
+msgstr "Anna hakemisto, johon varmuuskopiot on tallennettu"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<control>U"
+msgid "Please choose the desired security level"
+msgstr "Valitse haluttu turvataso"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Tiedosto/_Uusi"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "T盲m盲 kone on jo listassa, eik盲 sit盲 voida lis盲t盲 uudestaan.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "N盲yt盲 vain valittu p盲iv盲"
+msgid ", USB printer"
+msgstr ", USB tulostin"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "Emuloi kolmas n盲pp盲in?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Valitse sovellukset, jotka tukevat kirjasimia:"
-#: ../../standalone/mousedrake:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Valitse hiiren tyyppi."
+msgid "Configure X"
+msgstr "Asenna X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Yhdist盲 %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turkki (perinteinen \"F\"-malli)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "Katkaise %s"
+msgid "Congratulations!"
+msgstr "Onnittelut!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varoitus, toinen Internetyhteys on havaittu, mahdollisesti k盲ytt盲en sinun "
-"verkkoasi"
+msgid "Use owner id for execution"
+msgstr "k盲yt盲 omistaja id suoritukseen"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "vastaanotettu"
+msgid "Down"
+msgstr "Alas"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "l盲hetetty"
+msgid "Raw printer (No driver)"
+msgstr "Raakatulostin (ei ajuria)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "vastaanotettu: "
+msgid "Install rpm"
+msgstr "Asenna rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "l盲hetetty: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Tulostaaksesi tiedoston komentorivilt盲 (p盲盲te-ikkunasta) voit k盲ytt盲盲 joko "
+"komentoa: \"%s <tiedosto>\" tai graafinen tulostusty枚kalu: \"xpp tiedosto\" "
+"tai \"kprinter <tiedosto>\". Graafiset ty枚kalut sallivat sinun valita "
+"tulostimen ja muuttaa sen asetuksia helposti.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Paikallinen mitta"
+msgid "Time remaining "
+msgstr "Aikaa j盲ljell盲 "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "keskiarvo"
+msgid "UK keyboard"
+msgstr "UK n盲pp盲imist枚"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "V盲riasetukset"
+msgid "Unmount"
+msgstr "Irrota"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Yhteys ep盲onnistui.\n"
-"Tarkista asetukset Mandraken Ohjauskeskuksessa."
+msgid "Uninstall Fonts"
+msgstr "Poista kirjasimia"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Yhteys valmis."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Internetyhteyden katkaiseminen valmis."
+msgid "German (no dead keys)"
+msgstr "Saksa (ei kuolleita n盲pp盲imi盲)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Internetyhteyden katkaiseminen ei onnistunut."
+msgid "Transferring %s..."
+msgstr "Siirr盲n %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Avaan Internetyhteyden "
+msgid "32 thousand colors (15 bits)"
+msgstr "32 tuhatta v盲ri盲 (15 bitti盲)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Katkaisen Internetyhteyden "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "Voit jakaa sek盲 NFS:ll盲 ett盲 Samballa. Valitse kumpaa haluat k盲ytt盲盲."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Odota, testaan yhteytt盲si..."
+msgid "Reboot"
+msgstr "K盲ynnist盲 uudelleen"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Lokit"
+msgid "Gambia"
+msgstr "Gambia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Yhteysaika: "
+msgid "Mandrake Control Center"
+msgstr "Mandraken Ohjauskeskus"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Vastaanottonopeus:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Voit sy枚tt盲盲 sekalaiset portit.\n"
+"Toimivat esimerkit ovat: 139/tcp 139/udp.\n"
+"Katso /etc/services saadaksesi lis盲盲 tietoa."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "L盲hetysnopeus:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"N盲ytt枚\n"
+"\n"
+" Asennusohjelma yleens盲 tunnistaa ja asettaa koneeseesi liitetyn\n"
+"n盲yt枚n automaattisesti. Jos t盲m盲 ei toimi, voit itse valita n盲ytt枚si\n"
+"listauksesta."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Tilastot"
+msgid "\t-Tape \n"
+msgstr "\t-Nauha \n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profiili: "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Selainta ei ole asennettu j盲rjestelm盲ss盲si, ole hyv盲 ja asenna jokin jos "
+"haluat selata ohjej盲rjestelm盲盲"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Verkon valvonta"
+msgid "Remember this password"
+msgstr "Muista t盲m盲 salasana"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Haetaan asennettuja tulostimia..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Internetyhteyden jakaminen on nyt k盲yt枚ss盲."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Koneen nimi/IP-osoite:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Verkkoon k盲ytt盲en SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "T盲m盲 kone on jo listassa, eik盲 sit盲 voida lis盲t盲 uudestaan.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Jos haluttu tulostin tunnistettiin automaattisesti, sinun tarvitsee "
+"ainoastaan valita se listasta ja lis盲t盲 k盲ytt盲j盲nimi, salasana, ja/tai "
+"ty枚ryhm盲 tarvittaessa."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "K盲yt盲 tyhj盲盲 tilaa Windows-osiolla"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Sinun pit盲盲 sy枚tt盲盲 verkkoaseman nimi tai IP-osoite.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s l枚ytyi paikasta %s, aseta se automaattisesti ?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"Valitse kone jolle paikalliset kuvanlukijat pit盲isi asettaa k盲ytett盲viksi:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Paikallisten kuvanlukijoiden jakaminen"
+"Parametrit: (arg)\n"
+"\n"
+"K盲yt盲 salasanoja k盲ytt盲jien tunnistamiseen."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "T盲m盲 kone"
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 ajuri: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Poista valittu kone"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "T盲m盲 kone/verkko on jo listassa, eik盲 sit盲 voida lis盲t盲 uudestaan.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Muokkaa valittua konetta"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" DrakBackup-raportti \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Lis盲盲 kone"
+msgid "Choose the packages you want to install"
+msgstr "Valitse asennettavat paketit"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "N盲m盲 ovat koneet joista kuvanlukija(t) pit盲isi k盲ytt盲盲: "
+msgid "Papua New Guinea"
+msgstr "Papua Uusi-Guinea"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Et盲koneiden kuvanlukijoiden k盲ytt枚"
+msgid "Serbian (cyrillic)"
+msgstr "Serbia (cyrillic)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Kaikki et盲koneet"
+msgid "Make kernel message quiet by default"
+msgstr "Aseta ytimen viestit hiljaiseksi oletuksena"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"N盲m盲 ovat koneet ja verkot jossa paikallisesti liitetty kuvanlukija(t) "
-"pit盲isi olla k盲ytett盲viss盲:"
+"Haluatko asettaa t盲m盲n tulostimen (\"%s\")\n"
+"oletustulostimeksi?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "K盲yt盲 kuvanlukijoita koneissa: "
+msgid "The DHCP end range"
+msgstr "DHCP:n alueen loppu"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "K盲yt盲 et盲koneiden kuvanlukijoita"
+msgid "Creating bootdisk..."
+msgstr "Luon k盲ynnistyslevykett盲..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Kuvanlukijan jako koneille: "
+msgid "Wait please, testing your connection..."
+msgstr "Odota, testaan yhteytt盲si..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Kuvanlukijat t盲ss盲 koneessa ovat muiden koneiden k盲ytett盲viss盲"
+msgid "Bringing down the network"
+msgstr "Ajan alas verkkoa"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Voit my枚s m盲盲ritt盲盲 t盲盲ll盲 pit盲isik枚 et盲koneiden kuvanlukijat "
-"automaattisesti olla k盲ytett盲viss盲 t盲ss盲 koneessa."
+msgid "Login ID"
+msgstr "K盲ytt盲j盲 ID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"T盲盲ll盲 voit m盲盲ritt盲盲 miik盲li t盲h盲n koneeseen liitetyt kuvanlukijat pit盲isi "
-"olla k盲ytett盲viss盲 et盲koneissa sek盲 mitk盲 et盲koneet sallitaan."
+"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
+"verkoissa. T盲m盲 palvelu mahdollistaa NSF-tiedostolukot."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Luodaan asetettujen kuvanlukijoiden listaus uudelleen ..."
+msgid "DHCP Client"
+msgstr "DHCP-asiakas"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Etsit盲盲n uusia kuvanlukijoita ..."
+msgid "dismiss"
+msgstr "peruuta"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Etsit盲盲n asetetut kuvanlukijat ..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Tulostus/Skannaus laitteella \"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Kuvanlukijan jako"
+msgid "omit raid modules"
+msgstr "j盲t盲 pois raid-moduulit"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Lis盲盲 kuvanlukija manuaalisesti"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
+"lpd on palvelin joka jakaa tulostust枚it盲 kirjoittimille."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Etsi uusia kuvanlukijoita ..."
+msgid "Internet Connection Configuration"
+msgstr "Internetyhteyden asetus"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-"Yht盲k盲盲n kuvanlukijaa ei l枚ydetty, joka on kytketty suoraan tietokoneesi.\n"
+msgid "comma separated numbers"
+msgstr "pilkulla erotettuja numeroita"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Seuraava kuvanlukija:\n"
-"\n"
-"%s\n"
-"on k盲ytett盲viss盲 j盲rjestelm盲ss盲si.\n"
+"Kunhan olet valinnut laitteen, n盲et kuvauksen oikealla n盲kyv盲ss盲 kehyksess盲 "
+"(\"Tiedot\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Ylenn盲 valittua s盲盲nt枚盲 yksi taso"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Seuraavat kuvanlukijat:\n"
+"Seuraava kuvanlukija:\n"
"\n"
"%s\n"
"on k盲ytett盲viss盲 j盲rjestelm盲ss盲si.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Kuvanlukijasi %s on asetettu.\n"
-"Nyt voit lukea dokumentit tietokoneeseesi k盲ytt盲m盲ll盲 \"XSane\" Multimedia / "
-"Grafiikka valikossa."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "valitse laite"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Haluatko todella poistaa tulostimen \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Valitse laite johon kuvanlukijasi %s on kytketty."
+msgid "I can't find any room for installing"
+msgstr "Ei ole tarpeeksi tilaa asentamiseen"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Etsit盲盲n kuvanlukijoita ..."
+msgid "Default printer"
+msgstr "Oletustulostin"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Porttien automaattitunnistus"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Olet asettanut useita eri tapoja ottaa yhteys Internetiin.\n"
+"Valitse se, jota haluat k盲ytt盲盲.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Huomio: rinnakkaisportteja ei voida tunnistaa automaattisesti)"
+msgid "Modify RAID"
+msgstr "Muokkaa RAID:a"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"Kuvanlukija %s pit盲盲 asettaa printerdrake:n kautta.\n"
-"Voit k盲ynnist盲盲 printerdrake:n Mandraken Ohjauspaneelista Laitteisto-osasta."
+"Olen havainnut ISDN PCI-kortin, mutta en tunnista tyyppi盲. Valitse yksi "
+"seuraavassa ruudussa olevista korteista."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "T盲m盲 %s kuvanlukija ei ole tuettu"
+msgid "Add user"
+msgstr "Lis盲盲 k盲ytt盲j盲"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s ei ole tunnettu t盲ss盲 Scannerdraken versiossa."
+msgid "RAID-disks %s\n"
+msgstr "RAID-levyt %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s ei ole tuettu t盲ss盲 Mandrake Linux versiossa."
+msgid "Liberia"
+msgstr "Liberia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Portti: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Ole hyv盲 ja sy枚t盲 liitynn盲n nimi jolla yhdistet盲盲n Internetiin.\n"
+"\n"
+"Esimerkkej盲:\n"
+"\t\tppp+ modeemi tai DSL yhteyksille.\n"
+"\t\teth0 tai eth1 kaapeliyhteydelle.\n"
+"\t\tppp+ ISDN-yhteydelle.\n"
-#: ../../standalone/scannerdrake:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ","
+msgid "Choose your keyboard"
+msgstr "N盲pp盲imist枚n valinta"
-#: ../../standalone/scannerdrake:1
+# Asennuksen sivuvalikko
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Tunnistettu malli: %s"
+msgid "Format partitions"
+msgstr "Levyjen osiointi"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "CUPS asetuksien automaattinen korjaus "
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "Valitse kuvanlukijan malli"
+msgid "Running \"%s\" ..."
+msgstr "Suoritetaan \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s ei l枚ytynyt kuvanlukija-tietokannasta, \n"
-"asetetaanko manuaalisesti?"
+msgid "enable radio support"
+msgstr "ota radio-tuki k盲ytt枚枚n"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s l枚ytyi paikasta %s, aseta se automaattisesti ?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Laitteiston tunnistaminen k盲ynniss盲..."
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Joitakin laitteita lis盲ttiin:\n"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Joitakin laitteita luokasta \"%s\" poistettiin:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Kuvanlukijan jako koneille: "
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"MandrakeSoft:in menestys perustuu Vapaan Ohjelmiston periaatteeseen. Uusi "
-"k盲ytt枚j盲rjestelm盲si on maailmanlaajuisen Linux Yhteis枚n yhteisty枚n tulos."
+msgid "Loopback file name: %s"
+msgstr "Loopback-tiedoston nimi: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Tervetuloa Avoimen L盲hdekoodin maailmaan"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Valitse tulostin johon tulostusty枚t pit盲盲 ohjata."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Kiitos, ett盲 olet valinnut Mandrake Linux 9.1:n"
+msgid "Do not transfer printers"
+msgstr "脛l盲 siirr盲 tulostimia"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Jakaaksesi omaa tuntemustasi ja auttaaksesi Linux-ty枚kalujen kehityksess盲, "
-"liity keskustelufoorumeihin, joita l枚yd盲t meid盲n \"Yhteis枚\" webbisivuilta."
+msgid "Delay before booting the default image"
+msgstr "Viive ennen oletusj盲rjestelm盲n k盲ynnistyst盲"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Haluatko tiet盲盲 enemm盲n Avoimen L盲hdekoodin yhteis枚st盲? Tule osalliseksi "
-"Vapaan Ohjelmiston maailmaan!"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Rakenna Linuxin tulevaisuutta!"
+"\n"
+" Copyright (C) 2001-2002 MandrakeSoft \n"
+"\tDUPONT Sebastien (alkuper盲inen versio) \n"
+" CHAUMETTE Damien dchaumette\\@mandrakesoft.com\n"
+"\n"
+"T盲m盲 ohjelma on ilmainen; voit levitt盲盲 ja/tai muokata sit盲 Free\n"
+"Software Foundationin julkaiseman 'GNU General Public License'\n"
+"-lisenssin mukaisesti; joko lisenssin version 2 mukaisesti, tai\n"
+"(niin halutessasi) mink盲 tahansa uudemman version mukaisesti.\n"
+"\n"
+"T盲m盲 ohjelma on julkaistu siin盲 toivossa, ett盲 se osoittautuisi\n"
+"hy枚dylliseksi, mutta ILMAN MINK脛脛NLAISTA TAKUUTA; ilman edes\n"
+"oletettua takuuta TUOTTEEN TOIMIVUUDESTA tai SOPIVUUDESTA \n"
+"TIETTYYN TEHT脛V脛脛N. Lis盲tietoja saat tutustumalla 'GNU General \n"
+"Public License' dokumentaatioon.\n"
+"\n"
+"Hakemasi ohjelman mukana kuuluu tulla kopio 'GNU General Public License'\n"
+"dokumentaatiosta; jos n盲in ei ole, kirjoita osoitteeseen:\n"
+"Free Software Foundation Inc., 59 Temple Place - Suite 330,\n"
+" Boston, MA 02111-1307, USA.\n"
+"\n"
+" Kiitoksia:\n"
+" - pfm2afm: \n"
+"\t Ken Borgendale:\n"
+"\t Muuttaa Windows .pfm tiedoston .afm muotoon (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t James Macnicol: \n"
+"\t type1inst luo tiedostot fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Muuttaa ttf fonttitiedostot afm ja pfb fonteiksi\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 antaa sinulle mahdollisuuden k盲ytt盲盲 viimeisimpi盲 "
-"ohjelmia 盲盲nitiedostojen toistamiseen, kuvien muokkaukseen ja videoiden "
-"toistamiseen."
+msgid "Please check for multisession CD"
+msgstr "Valitse t盲m盲 jos haluat multisessio-CD:n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Selaa Internetti盲 k盲ytt盲en Mozilla tai Konqueror, lue s盲hk盲postit k盲ytt盲en "
-"Evolution tai Kmail, luo dokumenttejasi OpenOffice.org avulla."
+msgid "user"
+msgstr "k盲ytt盲j盲"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft on valinnut parhaat ohjelmat sinulle"
+msgid "Use Hard Disk to backup"
+msgstr "K盲yt盲 kiintolevy盲 varmuuskopiointiin"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 tarjoaa sinulle Mandraken Ohjauskeskus, joka on tehokas "
-"ty枚kalu sopeuttamaan tietokonesi vastaamaan tapeitasi. Aseta ja r盲盲t盲l枚i "
-"osat kuten turvataso, laitteisto (n盲ytt枚, hiiri, n盲pp盲imist枚...), "
-"Internetyhteytesi ja paljon muuta!"
+msgid "Configure"
+msgstr "Aseta"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Mandraken monitoiminen asetusty枚kalu"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Sopeuta tietokonesi t盲ydellisesti vastaamaan tarpaitasi k盲ytt盲en "
-"jokuMandrake Linux tarjoamat 11 k盲ytt枚liittym盲盲 jotka ovat t盲ysin "
-"r盲盲t盲l枚it盲viss盲: KDE 3.1, Gnome 2.2, WindowMaker, ..."
+"Varoitus, toinen Internet-yhteys on havaittu, mahdollisesti k盲ytt盲en sinun "
+"verkkoasi"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "R盲盲t盲l枚it盲viss盲 oleva ymp盲rist枚"
+msgid "Backup Users"
+msgstr "Varmuuskopioi k盲ytt盲j盲t"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Ohjelmien luomiseen ja muokkaamiseen eri kieliss盲 kuten Perl, Python, C ja C+"
-"+ eiv盲t ole ollut niin helppoa kiitos GNU gcc 3 ja parhaat Avoimen "
-"L盲hdekoodin kehitysymp盲rist枚t."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 on ratkaiseva kehitysalusta"
+"Sy枚t盲 koneesi nimi.\n"
+"Koneesi nimen pit盲isi olla t盲ydellinen, kuten ``minunkone.yritys.fi''.\n"
+"Voit antaa my枚s yhdysk盲yt盲v盲n IP-osoitteen jos sinulla on sellainen."
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Muuta koneesi tehokkaaksi Linux palvelimeksi parilla hiiren n盲pp盲imen "
-"painalluksella: webbipalvelin, s盲hk枚posti, palomuuri, reititin, tiedosto- ja "
-"tulostuspalvelin, ..."
+msgid "Select Printer Spooler"
+msgstr "Valitse tulostusjono"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Muuta koneesi luotettavaksi palvelimeksi"
+msgid "Create new theme"
+msgstr "Luo uusi teema"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"T盲ydellinen tuotelinjamme Linux-ratkaisuista, sek盲 erikoistarjouksia "
-"tuotteista ja muista \"herkuista\" on saatavilla online e-kaupastamme:"
+msgid "Mandrake Tools Explanation"
+msgstr "Mandraken ty枚kalujen selitykset"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Virallinen MandrakeSoft kauppa"
+msgid "No image found"
+msgstr "Kuvatiedostoa ei l枚ydetty"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Kohota tietokonesi suorituskyky盲 valittujen yrityksien avulla jotka "
-"tarjoavat ammattimaisia ratkaisuja jotka ovat yhteensopivia Mandrake "
-"Linuxin kanssa."
+"Osa t盲rkeist盲 paketeista j盲i asentamatta loppuun asti.\n"
+"Joko cdrom-asemasi tai levy on viallinen.\n"
+"Tarkista cd-rom Linux-koneessa k盲ytt盲m盲ll盲 \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
-"Saa parhaat tuotteet Mandrake Linux:in strateegisilta yhteisty枚kumppaneilta"
+msgid "Detected model: %s"
+msgstr "Tunnistettu malli: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft on muotoillut erityiset ty枚kalut luodaakseen turvallisin "
-"Mandrake Linux jakelu t盲h盲n sakka: Draksec, j盲rjestelm盲n turvallisuuden "
-"hallintaty枚kalu, ja tehokas palomuuri yhdistettyn盲 v盲hent盲盲 oleellisesti "
-"hakkeroinnin vaarat."
+"X11 N盲yt枚nhallinta sallii sinua k盲ytt盲m盲盲n graafista\n"
+"sis盲盲nkirjautumista j盲rjestelm盲盲n, jossa X-ikkunointij盲rjestelm盲 on "
+"k盲yt枚ss盲\n"
+"ja sallii useita samanaikaisia k盲ytt盲ji盲 paikallisessa koneessa."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimoi turvallisuutesi"
+msgid "if set to yes, run the daily security checks."
+msgstr "jos asetettu, suoritetaan p盲ivitt盲iset turvallisuustarkistukset."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "T盲m盲 tuote on saatavissa MandrakeStore:n webbisivustolla"
+msgid "Azerbaijan"
+msgstr "Azerbaidzan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Viimeistele turvallisuus-asetelmasi t盲ll盲 helppok盲ytt枚isell盲 ohjelmalla joka "
-"yhdist盲盲 korkeatehoisilla osilla kuten palomuuri, virituaaliverkko (VPN) "
-"palvelin ja asiakas, tunkeutumistunnistus-j盲rjestelm盲 ja liikennehallinta."
+msgid "No tape in %s!"
+msgstr "Ei nauhaa asemassa %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "Turvaa verkkosi k盲ytt盲en Multi Network Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
-"Liity MandrakeSoft tukiryhm盲盲n ja Linux Yhteis枚枚n verkossa jakaaksesi "
-"tuntemustasi ja auttaaksesi muita tulemalla tunnistetuksi asiantuntijaksi "
-"online teknisen tuen webbisivustossa:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "t盲m盲 on fyysinen v盲yl盲, johon laite on kytketty (esim PCI, USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "L枚yd盲 ratkaisuja ongelmiisi MandrakeSoft:n online-tukialustasta"
+msgid "How is the printer connected?"
+msgstr "Miten tulostin on liitetty?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Tule MandrakeExpert asiantuntijaksi"
+msgid "Security level"
+msgstr "Turvataso"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Kaikkia tapauksia seurataan yhden p盲tev盲n MandrakeSoft:n teknisen "
-"asiantuntijan toimesta."
+msgid "final resolution"
+msgstr "lopullinen tarkkuus"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Online-alusta, joka vastaa yrityskohtaiseen tukitarpeeseen"
+msgid "Services"
+msgstr "Palvelut"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 Mt"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19738,10 +19789,6 @@ msgstr ""
"(kspread,gnumeric), pdf-lukijat jne"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ty枚asema"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Pelikone"
@@ -19766,8 +19813,8 @@ msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
-"Valikoima ty枚kaluja s盲hk枚postin ja nyytisten lukemiseen (pine, mutt, tin...) "
-"sek盲 Internetiss盲 surffailuun"
+"Valikoima ty枚kaluja s盲hk枚postin ja uutisryhmien lukemiseen (pine, mutt, "
+"tin...) sek盲 Internetiss盲 surffailuun"
#: ../../share/compssUsers:999
msgid "Network Computer (client)"
@@ -19775,7 +19822,7 @@ msgstr "Verkkop盲盲te (asiakas)"
#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
-msgstr "Asiakasohjelmat eri protokollille (ssh jne)"
+msgstr "Asiakasohjelmat eri protokollille (SSH jne)"
#: ../../share/compssUsers:999
msgid "Configuration"
@@ -19813,10 +19860,6 @@ msgstr ""
"K-ty枚p枚yt盲ymp盲rist枚. Graafinen perusymp盲rist枚 ja sen mukana tulevat ty枚kalut"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafinen ymp盲rist枚"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-ty枚asema"
@@ -19833,11 +19876,7 @@ msgstr "Muut graafiset k盲ytt枚ymp盲rist枚t"
#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Kehitysymp盲rist枚"
+msgstr "IceWM, Window Maker, Enlightenment, FVWM, jne"
#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
@@ -19910,599 +19949,75 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-, SMB-, SSH- ja v盲lityspalvelin"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "脛盲ni-asema"
-
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "脛盲nen toisto- ja editointiohjelmat"
-
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "Video-asema"
-
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "Videoiden toisto- ja editointiohjelmat"
-
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "Grafiikka-asema"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "Grafiikkaohjelmistot, kuten Gimp"
-
-#: ../../share/compssUsers:999
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Valikoima ty枚kaluja s盲hk枚postin ja uutisryhmien lukemiseen sek盲 Internetiss盲 "
"surffailuun"
-#~ msgid "Printer sharing"
-#~ msgstr "Tulostimen jako"
-
-#~ msgid ""
-#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
-#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
-#~ "raster format for the data sent to the printer. The driver for these "
-#~ "printers is still in a very early development stage and so it will "
-#~ "perhaps not always work properly. Especially it is possible that the "
-#~ "printer only works when you choose the A4 paper size.\n"
-#~ "\n"
-#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
-#~ "was originally created, need their firmware to be uploaded to them after "
-#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
-#~ "search the printer's Windows driver CD or your Windows partition for the "
-#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
-#~ "following commands:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "The first command can be given by any normal user, the second must be "
-#~ "given as root. After having done so you can print normally.\n"
-#~ msgstr ""
-#~ "Tulostimesi kuuluu GDI lasertulostimien ryhm盲盲n (wintulostimia) joita "
-#~ "myyd盲盲n eri valmistajien nimill盲, ja jotka k盲ytt盲v盲t Zenographics ZJ-"
-#~ "stream rasterointiformaattia datalle joka l盲hetet盲盲n tulostimelle. Ajuri "
-#~ "n盲ille tulostimille on viel盲 aikaisessa kehitysvaiheessa, ja t盲st盲 syyst盲 "
-#~ "se ei aina toimi oikein. Eli voi olla ett盲 se toimii vain jos valitset "
-#~ "paperikoon A4.\n"
-#~ "\n"
-#~ "Jotkin tulostimet, esimerkiksi HP LaserJet 1000, jolle t盲m盲 ajuri alun "
-#~ "perin tehtiin, vaativat niiden oman firmwaren l盲hett盲misen niille heti "
-#~ "k盲ynnistyksen j盲lkeen. HP LaserJet 1000:n tapauksessa sinun pit盲盲 etsi盲 "
-#~ "tulostimesi Windows ajuri-cd:lt盲 tai Windows-osioltasi tiedosto "
-#~ "\"sihp1000.img\" ja l盲hett盲 se tulostimelle k盲ytt盲en jotain seuraavista "
-#~ "komennoista:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "Ensimm盲inen komento voidaan suorittaa tavallisena k盲ytt盲j盲n盲, mutta "
-#~ "toinen vaihtoehto toimii ainoastaan p盲盲k盲ytt盲j盲n盲. T盲m盲n tehty盲si voit "
-#~ "tulostaa normaalisti.\n"
-
-#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgstr "GDI Lasertulostin joka k盲ytt盲盲 Zenographics ZJ-Stream formaattia"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid "Office"
-#~ msgstr "Toimistosovellukset"
-
-#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
-#~ msgstr ""
-#~ "Kokoelma ty枚kaluja s盲hk枚postiin, nyytisiin, webiin, tiedostonsiirtoon ja "
-#~ "jutusteluun"
-
-#~ msgid "Games"
-#~ msgstr "Pelit"
-
-#~ msgid "Multimedia - Graphics"
-#~ msgstr "Multimedia - Grafiikka"
-
-#~ msgid "Multimedia - Sound"
-#~ msgstr "Multimedia - 脛盲ni"
-
-#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-#~ msgstr "脛盲nenk盲sittely: mp3, midi, mikserit jne"
-
-#~ msgid "Multimedia - Video"
-#~ msgstr "Multimedia - Video"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetyhteyden muodostus ja asetukset"
-#~ msgid "Video players and editors"
-#~ msgstr "Videon katselu ja editointi"
-
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multimedia - CD:n poltto"
-
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "Ty枚kalut CD:iden luomiseen ja polttamiseen"
-
-#~ msgid "More Graphical Desktops (Gnome, IceWM)"
-#~ msgstr "Lis盲盲 graafisia ty枚p枚yti盲 (Gnome, IceWM)"
-
-#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-#~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm jne"
-
-#~ msgid "Personal Information Management"
-#~ msgstr "Henkil枚kohtaisen tiedon hallinta"
-
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "Ty枚kalut Palm Pilotin tai Visorin liitt盲miseksi"
-
-#~ msgid "Personal Finance"
-#~ msgstr "Henkil枚kohtainen kirjanpito"
-
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "Ohjelmia henkil枚kohtaisen talouden hallintaan, kuten gnucash"
-
-#~ msgid "no network card found"
-#~ msgstr "yht盲k盲盲n verkkokorttia ei l枚ytynyt"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 has selected the best software for you. Surf the Web "
-#~ "and view animations with Mozilla and Konqueror, or read your mail and "
-#~ "handle your personal information with Evolution and Kmail"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 on valinnut parhaat ohjelmistot sinulle. Surffaa "
-#~ "netiss盲 ja toista animaatioita k盲ytt盲en Mozillaa ja Konqueroria tai lue "
-#~ "s盲hk枚postisi ja k盲sittele henkil枚kohtaiset tietosi k盲ytt盲en Evolutionia "
-#~ "ja Kmailia."
-
-#~ msgid "Get the most from the Internet"
-#~ msgstr "Ota kaikki irti Internetist盲"
-
-#~ msgid "Push multimedia to its limits!"
-#~ msgstr "Riko multimedian rajat!"
-
-#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
-#~ msgstr "Huomaa ajan tasalla olevat graafiset ja multimediaty枚kalut!"
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
-#~ "strategy, ..."
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 tarjoaa parhaat Avoimen L盲hdekoodin pelit - arcade, "
-#~ "toiminta, strategia, ..."
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides a powerful tool to fully customize and "
-#~ "configure your machine"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 tarjoaa tehokkaan ty枚kalun koneesi r盲盲t盲l枚intiin ja "
-#~ "asetuksien tekoon."
-
-#~ msgid "User interfaces"
-#~ msgstr "K盲ytt枚liittym盲t"
-
-#~ msgid ""
-#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
-#~ "Source development environments"
-#~ msgstr ""
-#~ "K盲yt盲 GNU gcc 3 k盲盲nt盲j盲n t盲ysi teho hyv盲ksesi samoin kuin parhaita "
-#~ "Avoimen L盲hdekoodin kehitysymp盲rist枚j盲"
-
-#~ msgid "Development simplified"
-#~ msgstr "Ohjelmistokehitys yksinkertaistettuna"
-
-#~ msgid ""
-#~ "This firewall product includes network features that allow you to fulfill "
-#~ "all your security needs"
-#~ msgstr ""
-#~ "T盲m盲 palomuurituote sis盲lt盲盲 verkko-ominaisuuksia jotka t盲ytt盲v盲t kaikki "
-#~ "turvallisuustarpeesi."
-
-#~ msgid ""
-#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
-#~ "N.F.)"
-#~ msgstr ""
-#~ "MandrakeSecurity tuotelinja sis盲lt盲盲 moniverkon palomuurin (Multi Network "
-#~ "Firewall product (M.N.F.))"
-
-#~ msgid "Strategic partners"
-#~ msgstr "Strategiset yhteisty枚kumppanit"
-
-#~ msgid ""
-#~ "Whether you choose to teach yourself online or via our network of "
-#~ "training partners, the Linux-Campus catalogue prepares you for the "
-#~ "acknowledged LPI certification program (worldwide professional technical "
-#~ "certification)"
-#~ msgstr ""
-#~ "Valitsetpa online itseopiskelun tai opetusverkostomme kumppaneita "
-#~ "oppiaksesi, Linux Campus luettelolla valmistaudut hyv盲ksyttyyn LPI "
-#~ "sertifiointiohjelmaan (maailmanlaajuinen ammattimainen tekninen "
-#~ "sertifiointi)."
-
-#~ msgid "Certify yourself on Linux"
-#~ msgstr "Hanki itsellesi Linux sertifiointi"
-
-#~ msgid ""
-#~ "The training program has been created to respond to the needs of both end "
-#~ "users and experts (Network and System administrators)"
-#~ msgstr ""
-#~ "Harjoitusohjelma on luotu vastaamaan loppuk盲ytt盲jien ja asiantuntijoiden "
-#~ "(verkko- ja j盲rjestelm盲yll盲pit盲jien) tarpeisiin."
-
-#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
-#~ msgstr "Huomaa MandrakeSoft:in harjoitusluettelo Linux Campus"
+# Asennuksen sivuvalikko
+#~ msgid "Configure the connection"
+#~ msgstr "Aseta verkkoyhteys"
-#~ msgid ""
-#~ "MandrakeClub and Mandrake Corporate Club were created for business and "
-#~ "private users of Mandrake Linux who would like to directly support their "
-#~ "favorite Linux distribution while also receiving special privileges. If "
-#~ "you enjoy our products, if your company benefits from our products to "
-#~ "gain a competititve edge, if you want to support Mandrake Linux "
-#~ "development, join MandrakeClub!"
-#~ msgstr ""
-#~ "MandrakeClub ja Mandrake Corporate Club luotiin Mandrake Linuxin yritys- "
-#~ "ja yksityisk盲ytt盲jille jotka haluavat suoraan tukea suosikki Linux-"
-#~ "jakeluaan ja my枚s saada erikoisoikeuksia. Jos pid盲t tuotteistamme, jos "
-#~ "yrityksesi hy枚dynt盲盲 tuotteitamme saadakseen kilpailuetua, jos haluat "
-#~ "tukea Mandrake Linux:in kehityst盲, liity MadrakeClub:iin!"
+#~ msgid "Disconnect"
+#~ msgstr "Katkaise yhteys"
-#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
-#~ msgstr "L枚yd盲 MandrakeClub ja Mandrake Corporate Club"
+#~ msgid "Connect"
+#~ msgstr "Yhdist盲"
#~ msgid ""
-#~ "As a review, DrakX will present a summary of various information it has\n"
-#~ "about your system. Depending on your installed hardware, you may have "
-#~ "some\n"
-#~ "or all of the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": check the current mouse configuration and click on the "
-#~ "button\n"
-#~ "to change it if necessary.\n"
-#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
-#~ "the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
-#~ "country, click on the button and choose another one.\n"
-#~ "\n"
-#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-#~ "primary language you have chosen. But here, just as in your choice of a\n"
-#~ "keyboard, you may not be in a country to which the chosen language\n"
-#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
-#~ "configure the clock for the correct timezone.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
-#~ "printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
#~ "\n"
-#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-#~ "click that button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-#~ "interface in \"800x600\" resolution. If that does not suits you, click "
-#~ "on\n"
-#~ "the button to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"Network\": If you want to configure your Internet or local network\n"
-#~ "access now, you can by clicking on this button.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. If you notice the sound card displayed is not the one "
-#~ "that\n"
-#~ "is actually present on your system, you can click on the button and "
-#~ "choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. If you have a TV card and it is not detected, click on the button "
-#~ "to\n"
-#~ "try to configure it manually.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated with the card."
+#~ "You can reconfigure your connection."
#~ msgstr ""
-#~ "T盲ss盲 DrakX n盲ytt盲盲 yhteenvedon laitteistoasi koskevista tiedoista\n"
-#~ "jotka se on ker盲nnyt. Asennetusta laitteistosta riippuen, n盲et joitakin\n"
-#~ "tai kaikki seuraavista tietueista:\n"
-#~ "\n"
-#~ " * \"Hiiri\": tarkista nykyinen hiiriasetus, ja paina painiketta jos on \n"
-#~ "tarvetta muuttaa sit盲;\n"
-#~ "\n"
-#~ " * \"N盲pp盲imist枚\":聽tarkista n盲pp盲inasettelu, ja paina painiketta jos "
-#~ "on \n"
-#~ "tarvetta muuttaa sit盲;\n"
-#~ "\n"
-#~ " * \"Maa\": takista maa-asetukset, jos et ole maassa, joka on valittu, "
-#~ "paina\n"
-#~ "painiketta ja valitse joku muu;\n"
-#~ " * \"Aikavy枚hyke\": DrakX oletuksena arvioi aikavy枚hykkeesi riippuen "
-#~ "siit盲,\n"
-#~ "mink盲 kielen olet valinnut. Mutta samalla tavalla kun n盲pp盲imist枚ll盲, "
-#~ "voi\n"
-#~ "olla ettet ole samassa maassa mihin kieli viittaa. T盲st盲 syyst盲 sinun "
-#~ "tarvitsee\n"
-#~ "painaa \"Aikavy枚hyke\"-painiketta asettaaksesi kellon sen mukaan miss盲\n"
-#~ "aikavy枚hykkeess盲 olet;\n"
-#~ "\n"
-#~ " * \"Tulostin\": painamalla \"Ei tulostinta\"-painiketta avaat "
-#~ "tulostuksen\n"
-#~ "asetusvelhon. Lue lis盲盲 asiaa koskevasta luvusta ``Aloitusoppaasta''\n"
-#~ "saadaaksesi lis盲盲tietoa miten asettaa uusi tulostin. K盲ytt枚liittym盲\n"
-#~ "joka esitet盲盲n siell盲 on vastaava kuin se jota k盲ytet盲盲n asennuksen\n"
-#~ "aikana;\n"
-#~ "\n"
-#~ " * \"K盲ynnistyslataaja\": jos haluat muuttaa k盲ynnistyslataajasi "
-#~ "asetuksia,\n"
-#~ "paina t盲t盲 painiketta. T盲t盲 ei kannata muuttaa jos et ole asiantuntija;\n"
-#~ "\n"
-#~ " * \"Graafinen k盲ytt枚liittym盲\": oletuksena DrakX asettaa graafisen\n"
-#~ "k盲ytt枚liittym盲si k盲ytt盲m盲盲n \"800x600\" n盲ytt枚tilaa. Jos t盲m盲 ei sovi\n"
-#~ "sinulle, paina painiketta muuttaaksesi asetuksia;\n"
-#~ "\n"
-#~ " * \"Verkko\": jos haluat asettaa Internet- tai paikallisverkkoasetuksia\n"
-#~ "nyt, voit painaa t盲t盲 painiketta;\n"
-#~ "\n"
-#~ " * \"脛盲nikortti\": jos 盲盲nikortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
-#~ "n盲ytet盲盲n t盲盲ll盲. Jos huomaat ett盲 n盲ytetty 盲盲nikortti ei vastaa sit盲\n"
-#~ "joka on asennettu koneeseesi, voit painaa t盲t盲 painiketta ja valita "
-#~ "toisen ajurin;\n"
#~ "\n"
-#~ " * \"TV-kortti\": jos TV-korttisi on tunnistettu j盲rjestelm盲ss盲si, se\n"
-#~ "n盲ytet盲盲n t盲盲ll盲. Jos sinulla on TV-kortti ja sit盲 ei ole tunnistettu,\n"
-#~ "voit painaa painiketta ja yritt盲盲 asettaa sen itse;\n"
-#~ "\n"
-#~ " * \"ISDN-kortti\": jos ISDN-kortti on tunnistettu j盲rjestelm盲ss盲si, se\n"
-#~ "n盲ytet盲盲n t盲盲ll盲. Voit painaa painiketta jos sinulla on tarvetta "
-#~ "muuttaa\n"
-#~ "kortin asetuksia."
+#~ "Voit asettaa yhteytesi uudelleen."
#~ msgid ""
-#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a grub/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or "
-#~ "another\n"
-#~ "OS.\n"
-#~ "\n"
-#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader.\n"
-#~ "\n"
-#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
-#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
-#~ "disk\n"
-#~ "(\"On Floppy\").\n"
-#~ "\n"
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
-#~ "LILO (the LInux LOader) ja grub ovat GNU/Linux j盲rjestelm盲lataajia.\n"
-#~ "Yleens盲 t盲m盲 askel on automaattinen, eli DrakX analysoi "
-#~ "k盲ynnistyssektorin\n"
-#~ "ja toimii sen mukaan mit盲 sielt盲 l枚ytyy:\n"
-#~ "\n"
-#~ " * jos Windows k盲ynnistyssektori l枚ytyy, sen tilalle asennetaan grub/"
-#~ "LILO\n"
-#~ "k盲ynnistyssektori. T盲ll盲 tavalla voit k盲ynnist盲盲 GNU/Linuxin tai jonkin "
-#~ "muun\n"
-#~ "k盲ytt枚j盲rjestelm盲n;\n"
-#~ "\n"
-#~ " * jos grub tai LILO k盲ynnistyssektori l枚ytyy, se p盲ivitet盲盲n uudempaan\n"
-#~ "versioon.\n"
-#~ "\n"
-#~ "Jos DrakX ei voi tehd盲 p盲盲t枚st盲, se kysyy sinulta mihin haluat asentaa\n"
-#~ "k盲ynnistyslataajan.\n"
#~ "\n"
-#~ "\"K盲ynnistyslaite\": yleens盲 sinun ei tarvitse muuttaa oletusta (\"Levyn\n"
-#~ "ensimm盲inen sektori (MBR)\"), mutta jos haluat, voit asentaa k盲ynnistys-\n"
-#~ "lataajan toiselle kovalevylle (\"/dev/hdb\") tai vaikkapa \"Levykkeelle"
-#~ "\".\n"
-#~ "\n"
-#~ "Valitsemalla \"Luo k盲ynnistyslevyke\" sinulle tarjoutuu ylim盲盲r盲inen\n"
-#~ "tapa k盲ynnist盲盲 kone pelastustilaan.\n"
-#~ "\n"
-#~ "Mandrake Linux CD-levy sis盲lt盲盲 sis盲盲nrakennetun pelastustilan. Voit \n"
-#~ "k盲ytt盲盲 sit盲 k盲ynnist盲m盲ll盲 koneen cd-levylt盲, painamalla >>F1<< \n"
-#~ "n盲pp盲int盲 k盲ynnistyksen aikana ja kirjoittamalla >>rescue<< "
-#~ "kehotteessa. \n"
-#~ "Mutta jos koneesi ei tue cd-levylt盲 k盲ynnistymist盲, sinun pit盲盲 tulla \n"
-#~ "takaisin t盲h盲n kohtaan ainakin kahdessa eri tilanteessa:\n"
-#~ "\n"
-#~ " * kun k盲ytt枚j盲rjestelm盲n lataaja asennetaan, DrakX uudelleenkirjoittaa\n"
-#~ "k盲ynnistyssektorin (MBR) p盲盲kovalevyll盲 (jos et k盲yt盲 toista "
-#~ "j盲rjestelm盲-\n"
-#~ "lataajaa), mahdollistaakseen sinun k盲ynnist盲盲 joko Windows tai GNU/Linux\n"
-#~ "(olettaen ett盲 sinulla on Windows asennettuna). Jos joudut uudelleen-\n"
-#~ "asentamaan Windowsin, Microsoftin asennusprosessi uudelleenkirjoittaa\n"
-#~ "k盲ynnistyssektorin, jolloin et en盲盲 pysty k盲ynnist盲m盲盲n GNU/Linuxia!\n"
-#~ "\n"
-#~ " * jos sattuu virhetilanne, etk盲 pysty k盲ynnist盲m盲盲n GNU/Linuxia\n"
-#~ "kovalevylt盲, t盲m盲 levyke voi olla ainoa tapa k盲ynnist盲盲 GNU/Linux.\n"
-#~ "Se sis盲lt盲盲 kohtuullisen m盲盲r盲n j盲rjestelm盲ty枚kaluja, jolla voit "
-#~ "korjata \n"
-#~ "j盲rjestelm盲si, joka on kaatunut s盲hk枚katkon, valitettavan "
-#~ "kirjotusvirheen,\n"
-#~ "salasanavirheen tai jonkun muun ongelman takia.\n"
-#~ "\n"
-#~ "Jos vastaat \"Kyll盲\", sinua pyydet盲盲n asettamaan levyke asemaan. \n"
-#~ "Levykkeen pit盲盲 olla tyhj盲 tai sis盲lt盲盲 tietoja joita et tarvitse. Sinun "
-#~ "ei \n"
-#~ "tarvitse alustaa levykett盲, koska DrakX uudelleenkirjoittaa koko "
-#~ "levykkeen."
+#~ "Voit joko ottaa yhteyden Internetiin tai asettaa yhteyden uudelleen."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Et ole juuri nyt yhteydess盲 Internetiin."
#~ msgid ""
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
-#~ "Valitsemalla \"Luo k盲ynnistyslevyke\" sinulle tarjoutuu ylim盲盲r盲inen\n"
-#~ "tapa k盲ynnist盲盲 kone pelastustilaan.\n"
-#~ "\n"
-#~ "Mandrake Linux CD-levy sis盲lt盲盲 sis盲盲nrakennetun pelastustilan. Voit \n"
-#~ "k盲ytt盲盲 sit盲 k盲ynnist盲m盲ll盲 koneen cd-levylt盲, painamalla >>F1<< \n"
-#~ "-n盲pp盲int盲 k盲ynnistyksen aikana ja kirjoittamalla >>rescue<< "
-#~ "kehotteessa. \n"
-#~ "Mutta jos koneesi ei tue cd-levylt盲 k盲ynnistymist盲, sinun pit盲盲 tulla \n"
-#~ "takaisin t盲h盲n kohtaan ainakin kahdessa eri tilanteessa:\n"
-#~ "\n"
-#~ " * kun k盲ytt枚j盲rjestelm盲n lataaja asennetaan, DrakX uudelleenkirjoittaa\n"
-#~ "k盲ynnistyssektorin (MBR) p盲盲kovalevyll盲 (jos et k盲yt盲 toista "
-#~ "j盲rjestelm盲-\n"
-#~ "lataajaa), mahdollistaakseen sinun k盲ynnist盲盲 joko Windows tai GNU/Linux\n"
-#~ "(olettaen ett盲 sinulla on Windows asennettuna). Jos joudut uudelleen-\n"
-#~ "asentamaan Windowsin, Microsoftin asennusprosessi uudelleenkirjoittaa\n"
-#~ "k盲ynnistyssektorin, jolloin et en盲盲 pysty k盲ynnist盲m盲盲n GNU/Linuxia!\n"
-#~ "\n"
-#~ " * jos sattuu virhetilanne, etk盲 pysty k盲ynnist盲m盲盲n GNU/Linuxia\n"
-#~ "kovalevylt盲, t盲m盲 levyke voi olla ainoa tapa k盲ynnist盲盲 GNU/Linux.\n"
-#~ "Se sis盲lt盲盲 kohtuullinen m盲盲r盲n j盲rjestelm盲ty枚kaluja, jolla voit korjata\n"
-#~ "j盲rjestelm盲si, joka on kaatunut s盲hk枚katkon, valitettavan "
-#~ "kirjotusvirheen,\n"
-#~ "unohdetun salasanan jonkin muun ongelman takia.\n"
#~ "\n"
-#~ "Jos vastaat \"Kyll盲\", sinua pyydet盲盲n asettamaan levyke asemaan.\n"
-#~ "Levykkeen pit盲盲 olla tyhj盲 tai sis盲lt盲盲 tietoja joita et tarvitse. Sinun "
-#~ "ei\n"
-#~ "tarvitse alustaa levykett盲 koska DrakX uudelleenkirjoittaa koko levykkeen."
+#~ "Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-#~ msgid ""
-#~ "The following printers are configured. Double-click on a printer to "
-#~ "change its settings; to make it the default printer; to view information "
-#~ "about it; or to make a printer on a remote CUPS server available for Star "
-#~ "Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Seuraavat tulostimet ovat asetettuja. Tuplaklikkaa tulostinta "
-#~ "muuttaaksesi sen asetuksia; asettaaksesi sen oletustulostimeksi; "
-#~ "n盲hd盲ksesi tulostimen tiedot; tai asettaaksesi tulostimen CUPS-"
-#~ "et盲palvelimella StarOffice/ OpenOffice.org/GIMP k盲ytt枚枚n."
-
-#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "Sy枚t盲 koneesi nimi, jos tied盲t sen.\n"
-#~ "Jotkin DHCP-palvelimet tarvitsevat koneen nimen toimiakseen.\n"
-#~ "Koneesi nimen pit盲isi olla t盲ysin laillinen nimi, kuten\n"
-#~ "\"minunkone.omapaikka.net\"."
-
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "Virhe DrakFloppyssa: %s"
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Olet parasta aikaa yhteydess盲 Internetiin."
-#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
+#~ msgid "files sending by FTP"
+#~ msgstr "tiedostoja l盲hetet盲盲n FTP:n yli"
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "K盲yt盲 Auroraa k盲ynnistyksen aikana"
-
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Perinteinen Gtk+ valvonta"
-
-#~ msgid "Traditional Monitor"
-#~ msgstr "Perinteinen valvonta"
-
-#~ msgid "NewStyle Monitor"
-#~ msgstr "Uuden tyylin valvonta"
-
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "Uuden tyylin kategoroiva valvonta"
-
-#~ msgid "Secure Connection"
-#~ msgstr "Salattu yhteys"
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr ""
+#~ "K盲yt盲 kasvavaa varmuuskopiointia (盲l盲 korvaa vanhoja varmuuskopioita)"
-#~ msgid "FTP Connection"
-#~ msgstr "FTP-yhteys"
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Suorita 'lilo' uudelleen"
-#~ msgid "/Options"
-#~ msgstr "/Optiot"
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Tee initrd: 'mkinitrd -f /boot/initrd-%s.img %s'."
-#~ msgid "/Autodetect jazz drives"
-#~ msgstr "/Jazz asemien automaattitunnistus"
+#~ msgid "Write %s"
+#~ msgstr "Kirjoita %s"
-#~ msgid "/Autodetect modems"
-#~ msgstr "/Modeemien automaattitunnistus"
+#~ msgid "Copy %s to %s"
+#~ msgstr "Kopioidaan %s kohteeseen %s"
-#~ msgid "/Autodetect printers"
-#~ msgstr "/Tulostimien automaattitunnistus"
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Varmista %s kohteeseen %s.old"
-#~ msgid "Mail/Groupware/News"
-#~ msgstr "S盲hk枚posti/Groupware/Uutiset"
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ttf kirjasinten muunnos"
-#~ msgid "Postfix mail server, Inn news server"
-#~ msgstr "Postfix-postipalvelin, Inn-uutispalvelin"
+#~ msgid "Fonts conversion"
+#~ msgstr "Kirjasinten muuntaminen"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
index fb42de6af..b262e34c3 100644
--- a/perl-install/share/po/fr.po
+++ b/perl-install/share/po/fr.po
@@ -58,8 +58,8 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX-fr\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-03-14 18:39+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-04-23 15:02+0200\n"
"Last-Translator: Christophe Combelles <ccomb@free.fr>\n"
"Language-Team: french <cooker-i18n@linux-mandrake.com>\n"
"MIME-Version: 1.0\n"
@@ -67,983 +67,1921 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Examen des partitions afin d'identifier les points de montage"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+"Si oui, v閞ifie les ajouts/retraits des fichiers qui ont la permission \"suid"
+"\"."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tEfface=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "port de l'imprimante r閟eau"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Veuillez ins閞er une disquette dans le lecteur"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"Pour autoriser un utilisateur partager ses dossiers, vous devez ajouter "
-"cet utilisateur dans le groupe 珷fileshare牷.\n"
-"Ceci peut se faire gr鈉e au programme 珷Userdrake牷."
+"La table des partitions contenue sur la sauvegarde\n"
+"n'a pas la m阭e taille que le disque.\n"
+"D閟irez-vous tout de m阭e continuer?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Annuler"
+msgid "Which username"
+msgstr "Quel nom d'utilisateur"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "Lancer Userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Quel type de syst鑝e souhaitez-vous ajouter?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Charger une table des partitions..."
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Sur serveur CUPS 珷%s牷"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Configuration post-installation"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Utilisez plut魌 珷%s牷"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Type"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"Souhaitez-vous permettre aux utilisateurs de partager certains sous-"
-"r閜ertoires de leur dossier personnel (/home)?\n"
-"De cette fa鏾n, les utilisateurs pouront simplement cliquer sur 珷Partager牷 "
-"dans Konqueror (kde) et Nautilus (gnome).\n"
"\n"
-"珷Personnalis閑牷 permet d'autoriser le partage pour certains utilisateurs.\n"
+"Aussi, les imprimantes configur閑s avec les fichiers PPD fournis par leur "
+"fabriquant ou avec des pilotes CUPS natifs ne peuvent pas 阾re transf閞閑s."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Le paquetage %s, requis, est manquant"
+msgid "Sri Lanka"
+msgstr "Sri Lanka"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
-"Souhaitez-vous exporter par NFS (protocole Unix) ou SMB (protocole Windows)?"
+"Les imprimantes suivantes:\n"
+"\n"
+"%s%s\n"
+"sont connect閑s directement votre syst鑝e."
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Le paquetage %s doit 阾re install. Souhaitez-vous l'installer?"
+msgid "Central African Republic"
+msgstr "R閜ublique Centrafricaine"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Personnalis"
+msgid "Gateway device"
+msgstr "P閞iph閞ique passerelle"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "Autoriser tous les utilisateurs"
+msgid "Net Method:"
+msgstr "M閠hode NET:"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "Pas de partage"
+msgid "Ethernetcard"
+msgstr "Carte ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "Davantage"
+msgid "Parameters"
+msgstr "Param鑤res"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Voici la liste compl鑤e des pays disponibles"
+msgid "Auto-detect"
+msgstr "Auto-d閠ecter"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "Veuillez choisir votre pays."
+msgid "Interface:"
+msgstr "Interface:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid " / Region"
-msgstr " / R間ion"
+msgid "Select installation class"
+msgstr "Classe d'installation"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "Pays"
+msgid "on CDROM"
+msgstr "sur CD-Rom"
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "Toutes les langues"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Le syst鑝e ne semble pas connect Internet.\n"
+"Essayez de reconfigurer votre connexion."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "Utiliser l'Unicode par d閒aut"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Branchez votre imprimante sur un serveur Linux et laissez votre(vos) machine"
+"(s) Windows se connecter en tant que client.\n"
+"\n"
+"Souhaitez-vous vraiment poursuivre le parm閠rage de cette imprimante de "
+"cette fa鏾n?"
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "B閘arus"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Erreur d'閏riture dans le fichier %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"Vous pouvez choisir d'autres langues.\n"
-"Elles seront disponibles apr鑣 l'installation."
+"Apmd surveille l'閠at de la batterie d'un portable, et en garde une trace "
+"(via syslog). Il peut 阾re utilis pour arr阾er proprement la machine "
+"lorsque la batterie est tr鑣 faible et apr鑣 avoir averti les utilisateurs."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "Choisissez la langue:"
+msgid "Use tape to backup"
+msgstr "Sauvegarde sur cartouche"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Choisissez l'environnement graphique:"
+msgid "The following packages are going to be installed"
+msgstr "Les paquetages suivants vont 阾re install閟"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Choisissez l'utilisateur par d閒aut:"
+msgid "CUPS configuration"
+msgstr "Configuration de CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Voulez-vous utiliser cette fonctionnalit闋?"
+msgid "Hong Kong"
+msgstr "Hong-Kong"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-" la fin du d閙arrage, une session peut 阾re ouverte automatiquement pour un "
-"utilisateur."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Pas assez d'espace libre pour cr閑r de nouvelles partitions"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Connexion automatique"
+msgid "Moving"
+msgstr "D閜lacement"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "Ic鬾e"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"activit閟 de Drakbackup par %s:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "Interpr閠eur"
+msgid "("
+msgstr "("
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "Mot de passe (v閞if)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Bienvenue dans l'assistant de configuration r閟eau.\n"
+"\n"
+"Nous sommes sur le point de configurer votre connexion internet et r閟eau.\n"
+"Si vous ne souhaitez pas utiliser la d閠ection automatique, d閟閘ectionnez "
+"la case correspondante.\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "Mot de passe"
+msgid ")"
+msgstr ")"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "Nom d'utilisateur"
+msgid "Lebanon"
+msgstr "Liban"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "Nom et pr閚om"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Accepter"
+msgid "Stop"
+msgstr "Arr阾er"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "Terminer"
+msgid "Edit selected host"
+msgstr "Modifier l'h魌e s閘ectionn"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Cr閑r un compte utilisateur\n"
-"%s"
+msgid "No CD device defined!"
+msgstr "Pas de p閞iph閞ique CD d閒ini!"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "Ajouter un utilisateur"
+msgid "Bulgarian (phonetic)"
+msgstr "Bulgare (phon閠ique)"
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Ce nom d'utilisateur est d閖 utilis"
+msgid "The DHCP start ip"
+msgstr "L'adresse DHCP de d閎ut"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "Ce nom d'utilisateur est trop long"
+msgid "256 kB"
+msgstr "256 ko"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "Principales options du programme d'amor鏰ge"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-"Le nom d'utilisateur ne peut contenir que des lettres minuscules,\n"
-"des nombres, ainsi que les caract鑢es 珷-牷 et 珷_牷"
+"[--manual] [--device=dev] [--update-sane=dossier_source_sane] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "Veuillez taper un nom d'utilisateur"
+msgid "Tape"
+msgstr "Bande"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Ce mot de passe est trop simple"
+msgid "Scanning network..."
+msgstr "Parcours du r閟eau..."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please try again"
-msgstr "Veuillez r閑ssayer"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"Note: la sauvegarde incr閙entale n'閏rase pas les anciennes sauvegardes."
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Les mots de passe ne sont pas identiques"
+msgid "Malaysia"
+msgstr "Malaisie"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(already added %s)"
-msgstr "Utilisateur(s) existant(s): %s"
+msgid "Swiss (French layout)"
+msgstr "Suisse (fran鏰is)"
-#: ../../any.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "acc鑣 aux outils de compilation"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "珷mkraid牷 a 閏hou (les 珷raidtools牷 sont-ils install閟?)"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to network tools"
-msgstr "acc鑣 aux outils r閟eaux"
+msgid "Webcam"
+msgstr "Webcam"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Taille du cache (de second niveau) du processeur"
+
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "acc鑣 aux fichiers d'administration"
+msgid "Soundcard"
+msgstr "Carte son"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "allow \"su\""
-msgstr "autoriser 珷su牷"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"Pour imprimer un fichier depuis la ligne de commande (une fen阾re de "
+"terminal), utilisez la commande 珷%s<fichier>.\n"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to rpm tools"
-msgstr "acc鑣 aux outils rpm"
+msgid "Level %s\n"
+msgstr "RAID de niveau %s\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to X programs"
-msgstr "acc鑣 aux programmes graphiques"
+msgid "Luxembourg"
+msgstr "Luxembourg"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-"Voici les diff閞entes entr閑s.\n"
-"Vous pouvez en ajouter de nouvelles ou modifier les entr閑s existantes."
+"\n"
+" Rapport de sauvegarde p閞iodique (DrakBackup)\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Autres syst鑝es (Windows, etc.)"
+msgid "Iran"
+msgstr "Irak"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Autres syst鑝es (MacOS, etc.)"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Autres syst鑝es (SunOS, etc.)"
+msgid "Iraq"
+msgstr "Irak"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"Conflit potentiel d'adresses du r閟eau local trouv dans la configuration de "
+"%s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Quel type de syst鑝e souhaitez-vous ajouter?"
+msgid "Configuring..."
+msgstr "Configuration en cours..."
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "This label is already used"
-msgstr "Ce label est d閖 utilis"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr ""
+"La configuration a d閖 閠 effectu閑, et elle est actuellement activ閑."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "Vous devez sp閏ifier une partition racine"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
+"Pour la plupart des cartes TV r閏entes, le module bttv du noyau GNU/Linux "
+"auto-d閠ecte tout seul les bons param鑤res.\n"
+"Si votre carte est mal d閠ect閑, vous pouvez donner les types de tuner et de "
+"carte corrects ici. Vous n'avez qu'a s閘ectionner les param鑤res n閏essaires "
+" votre carte TV si n閏essaire."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "Vous devez sp閏ifier l'image noyau d閟ir閑"
+msgid "Password (again)"
+msgstr "Mot de passe (v閞if)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "Un label vide n'est pas autoris"
+msgid "Search installed fonts"
+msgstr "Chercher les polices install閑s"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Default"
-msgstr "Choix par d閒aut"
+msgid "Venezuela"
+msgstr "Venezuela"
-#: ../../any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "IP address"
+msgstr "Adresse IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Initrd-size"
-msgstr "Taille du RamDisk"
+msgid "Choose the sizes"
+msgstr "Choix des tailles"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Append"
-msgstr "options pass閑s au noyau"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Liste des donn閑s corrompues:\n"
+"\n"
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Label"
-msgstr "Label"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Votre modem n'est pas support par le syst鑝e.\n"
+"Veuillez consulter http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Peu s鹯"
+msgid "Choose another partition"
+msgstr "Choisissez une autre partition"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Table"
-msgstr "Table des partitions"
+msgid "Current user"
+msgstr "Utilisateur courant"
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Root"
-msgstr "Partition racine"
+msgid "Username"
+msgstr "Nom d'utilisateur"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lecture/閏riture"
+msgid "Left \"Windows\" key"
+msgstr "Touche 珷Windows牷 gauche"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd"
-msgstr "Fichier RamDisk"
+msgid "dhcpd Server Configuration"
+msgstr "Configuration du serveur dhcpd"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Video mode"
-msgstr "Mode vid閛"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"Utilis pour des dossiers:\n"
+"un fichier du dossier ne peut 阾re effac ou renomm que par le "
+"propri閠aire du dossier ou du fichier"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Image"
-msgstr "Image"
+msgid "Guyana"
+msgstr "Guyana"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "Syst鑝e d'exploitation par d閒aut?"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " sur serveur Novell 珷%s牷, imprimante 珷%s牷"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Autoriser le d閙arrage sur l'OF?"
+msgid "Remove a module"
+msgstr "Retirer un module"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "Autoriser le d閙arrage sur CD?"
+msgid "Password"
+msgstr "Mot de passe"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "D閘ai d'amor鏰ge du noyau"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"R鑗le la dur閑 de vie des mots de passe 珷max牷 et le d閘ai de changement "
+"de mot de passe 珷inactive牷."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
-msgstr "D閘ai de l'Open Firmware"
+msgid "Advanced Configuration"
+msgstr "Configuration manuelle"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot device"
-msgstr "P閞iph閞ique d'amor鏰ge"
+msgid "Scanning on your HP multi-function device"
+msgstr "Num閞isation avec votre p閞iph閞ique multifonction HP"
#: ../../any.pm:1
#, c-format
-msgid "Init Message"
-msgstr "Message de d閙arrage"
+msgid "Root"
+msgstr "Partition racine"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Programme d'amor鏰ge utiliser"
+msgid "Choose an existing RAID to add to"
+msgstr "Choisissez un RAID existant"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Principales options du programme d'amor鏰ge"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turc (mod鑜e moderne 珷Q牷)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Lilo message not found"
+msgstr "Message de LILO non trouv"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-"L'option ``Restrict command line options'' est inutile sans mot de passe"
+"R間閚閞ation automatique des fichiers d'en-t阾es pour le noyau\n"
+"dans le dossier /boot pour /usr/include/linux/{autoconf,version}.h"
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Indiquez la quantit de m閙oire en Mo"
+msgid "if needed"
+msgstr "si besoin est"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Autoriser plusieurs profils"
+msgid "Restore Failed..."
+msgstr "蒫hec de la restauration..."
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pr閏isez la taille m閙oire si n閏essaire (%d燤o trouv閟)"
+msgid "/Autodetect _jazz drives"
+msgstr "/Auto-d閠ecter les p閞iph閞iques Jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Vider le dossier /tmp chaque d閙arrage"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Description:\n"
+"\n"
+" Drakbackup sert sauvegarder votre syst鑝e.\n"
+" Pendant sa configuration vous pouvez s閘ectionner: \n"
+"\t- des fichiers syst鑝es, \n"
+"\t- des comptes utilisateur, \n"
+"\t- d'autres donn閑s,\n"
+"\tou Tout votre syst鑝e ... et d'autres (comme des partitions Windows)\n"
+"\n"
+" Drakbackup vous permet de faire des sauvegarde sur:\n"
+"\t- Disque dur.\n"
+"\t- NFS.\n"
+"\t- CD-Rom, DVD (avec auto-amor鏰ge, r閏up閞ation et auto-install.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Cartouche.\n"
+"\n"
+" Drakbackup peut restaurer votre syst鑝e vers un dossier choisi.\n"
+"\n"
+" Par d閒aut toute sauvegarde sera stock閑 dans le\n"
+" dossier /var/lib/drakbackup\n"
+"\n"
+" Fichier de configuration:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"蓆ape de restauration:\n"
+" \n"
+" Pendant l'閠ape de restauration, DrakBackup va retirer \n"
+" votre dossier d'origine et v閞ifier qu'aucun fichier\n"
+" de sauvegarde n'est corrompu. Il est recommand \n"
+" de faire une derni鑢e sauvegarde avant restauration.\n"
+"\n"
+"\n"
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Disquette d'amor鏰ge"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
+"Introduction\n"
+"\n"
+"Le syst鑝e d'exploitation et les divers composants disponibles dans la \n"
+"distribution Mandrake Linux sont ci-apr鑣 d閚omm閟 les 珷Logiciels牷.\n"
+"Les Logiciels comprennent notamment, mais de fa鏾n non limitative,\n"
+"l'ensemble des programmes, proc閐閟, r鑗les et documentations \n"
+"relatifs au syst鑝e d'exploitation et aux divers composants de la \n"
+"distribution Mandrake Linux.\n"
+"\n"
+"\n"
+"1. Licence\n"
+"\n"
+"Veuillez lire attentivement le pr閟ent document. Ce document constitue \n"
+"un contrat de licence entre vous (personne physique ou personne morale) et \n"
+"MandrakeSoft S.A. portant sur les Logiciels.\n"
+"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
+"mani鑢e que ce soit indique que vous reconnaissez avoir pr閍lablement eu \n"
+"connaissance et que vous acceptez de vous conformer aux termes et "
+"conditions \n"
+"du pr閟ent contrat de licence. En cas de d閟accord avec le pr閟ent "
+"document \n"
+"vous n'阾es pas autoris installer, reproduire et utiliser de quelque \n"
+"mani鑢e que ce soit ce produit.\n"
+"Le contrat de licence sera r閟ili automatiquement et sans pr閍vis dans le \n"
+"cas o vous ne vous conformeriez pas aux dispositions du pr閟ent document. \n"
+"En cas de r閟iliation vous devrez imm閐iatement d閠ruire tout exemplaire "
+"et \n"
+"toute copie de tous programmes et de toutes documentations qui constituent \n"
+"le syst鑝e d'exploitation et les divers composants disponibles dans la \n"
+"distribution Mandrake Linux.\n"
+"\n"
+"\n"
+"2. Garantie et limitations de garantie\n"
+"\n"
+"Les Logiciels et la documentation qui les accompagne sont fournis en "
+"l'閠at \n"
+"et sans aucune garantie. MandrakeSoft S.A. d閏line toute responsabilit \n"
+"d閏oulant d'un dommage direct, sp閏ial, indirect ou accessoire, de quelque \n"
+"nature que ce soit, en relation avec l'utilisation des Logiciels, "
+"notamment \n"
+"et de fa鏾n non limitative, tout dommage entra頽 par les pertes de \n"
+"b閚閒ices, interruptions d'activit, pertes d'informations commerciales ou \n"
+"autres pertes p閏uniaires, ainsi que des 関entuelles condamnations et \n"
+"indemnit閟 devant 阾re vers閑s par suite d'une d閏ision de justice, et ce \n"
+"m阭e si MandrakeSoft S.A. a 閠 inform閑 de la survenue ou de \n"
+"l'関entualit de tels dommages.\n"
+"\n"
+"AVERTISSEMENT QUANT LA D蒚ENTION OU L'UTILISATION DE LOGICIELS \n"
+"PROHIB蒘 DANS CERTAINS PAYS \n"
+"\n"
+"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront 阾re \n"
+"tenus responsable raison d'un pr閖udice sp閏ial, direct, indirect ou \n"
+"accessoire, de quelque nature que ce soit (notamment et de fa鏾n non \n"
+"limitative les pertes de b閚閒ices, interruptions d'activit, pertes \n"
+"d'informations commerciales ou autres pertes p閏uniaires, ainsi que \n"
+"des 関entuelles condamnations et indemnit閟 devant 阾re vers閑s par suite \n"
+"d'une d閏ision de justice) qui ferait suite l'utilisation, la d閠ention \n"
+"ou au simple t閘閏hargement depuis l'un des sites de t閘閏hargement de \n"
+"Mandrake Linux de logiciels prohib閟 par la l間islation laquelle vous \n"
+"阾es soumis. Cet avertissement concerne notamment certains logiciels de \n"
+"cryptographie fournis avec les Logiciels.\n"
+"\n"
+"\n"
+"3. Licence GPL et autres licences\n"
+"\n"
+"Les Logiciels sont constitu閟 de modules logiciels cr殚s par diverses \n"
+"personnes (physiques ou morales). Nombre d'entre eux sont distribu閟 sous \n"
+"les termes de la Licence Publique G閚閞ale GNU (ci-apr鑣 d閚omm閑 珷GPL牷)\n"
+"ou d'autres licences similaires. La plupart de ces licences vous "
+"permettent \n"
+"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
+"r間issent. Veuillez lire et agr閑r les termes et conditions des licences \n"
+"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
+"concernant la licence d'un Logiciel est soumettre l'auteur (ou ses\n"
+"repr閟entants) du Logiciel et non MandrakeSoft. \n"
+"Les programmes con鐄s par MandrakeSoft sont r間is par la licence GPL. \n"
+"La documentation r閐ig閑 par MandrakeSoft fait l'objet d'une licence \n"
+"sp閏ifique. Veuillez vous r閒閞ez la documentation pour obtenir plus \n"
+"de pr閏isions.\n"
+"\n"
+"\n"
+"4. Propri閠 intellectuelle\n"
+"\n"
+"Tous les droits, titres et int閞阾s des diff閞ents Logiciels sont la \n"
+"propri閠 exclusive de leurs auteurs respectifs et sont prot間閟 au titre \n"
+"des droits de propri閠 intellectuelle et de copyright applicables aux "
+"Logiciels.\n"
+"Les marques 珷Mandrake牷 et 珷Mandrake Linux牷 ainsi que les \n"
+"logotypes associ閟 sont d閜os閟 par MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Dispositions diverses\n"
+"\n"
+"Si une disposition de ce contrat de licence devait 阾re d閏lar閑 nulle, \n"
+"ill間ale ou inapplicable par un tribunal comp閠ent, cette disposition sera \n"
+"exclue du pr閟ent contrat. Vous continuerez 阾re li閟 aux autres \n"
+"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
+"est soumis la Loi fran鏰ise. Toute contestation relative aux pr閟entes \n"
+"dispositions sera r間l閑 pr閍lablement par voie amiable. A d閒aut d'accord\n"
+"avec MandrakeSoft S.A., les tribunaux comp閠ents de Paris seront saisis du \n"
+"litige. Pour toute question relative au pr閟ent document, veuillez \n"
+"contacter MandrakeSoft S.A.\n"
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "restrict"
-msgstr "protection"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"coordonn閑s x du coin sup閞ieur gauche\n"
+"de la barre de progression"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Prot間er par mot de passe les options"
+msgid "Current interface configuration"
+msgstr "Configuration actuelle de l'interface"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Si vous poss閐ez une carte ISA, les donn閑s du prochain 閏ran devraient\n"
+"阾re correctes.\n"
+"\n"
+"Si vous poss閐ez une carte PCMCIA, vous avez besoin de conna顃re\n"
+"les r間lages 珷IRQ牷 et 珷IO牷 de votre carte.\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do not print any test page"
+msgstr "Ne pas imprimer de page de test"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Forcer sans APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "Activer l'ACPI"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Ce mot de passe est trop court (minimum %d caract鑢es)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "D閘ai avant l'activation du choix par d閒aut"
+msgid "[keyboard]"
+msgstr "[keyboard]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "compact"
-msgstr "compact"
+msgid "FTP proxy"
+msgstr "Serveur mandataire FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Compact"
-msgstr "Compact"
+msgid "Install List"
+msgstr "Installe la liste"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Installation du programme d'amor鏰ge"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Changer le\n"
+"chemin de sauvegarde"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Premier secteur de la partition d'amor鏰ge"
+msgid "Show only for the selected day"
+msgstr "N'afficher que les pour les jours s閘ectionn閟"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Premier secteur du disque (MBR)"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"Survol de drakTermServ\n"
+"\t\t\t \n"
+" - Cr閑r des images d'amor鏰ge Etherboot:\n"
+" \t\tPour amorcer un noyau par etherboot, un noyau et un initrd "
+"sp閏iaux doivent 阾re cr閑s.\n"
+" \t\tmkinitrd-net fait une grande partie de ce travail et "
+"drakTermServ est simplement une interface graphique\n"
+" \t\tpour aider g閞er et personnaliser ces images.\n"
+"\n"
+" - Maintenir /etc/dhcpd.conf:\n"
+" \t\tPour pouvoir 阾re amorc par le r閟eau, chaque client a besoin "
+"d'une entr閑 dans le fichier dhcpd.conf, pour lui assigner une adresse IP\n"
+" \t\tet des images d'amor鏰ge. drakTermServ permet de cr閑r ou "
+"retirer ces entr閑s.\n"
+"\t\t\t\n"
+" \t\t(Les cartes PCI peuvent omettre l'image, etherboot demandera "
+"l'image correcte. Il faut aussi\n"
+" \t\ttenir compte du fait que quand etherboot cherche des images, il "
+"s'attend trouver des noms comme\n"
+" \t\tboot-3c59x.nbi, plut魌 que boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tUne strophe habituelle de dhcpd.conf pour le support d'un client "
+"l間er ressemble 酄:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tBien que vous pouvez utiliser une plage d'adresses IP plut魌 qu'une "
+"entr閑\n"
+"\t\t\tsp閏ifique pour chaque machine client, l'utilisation d'adresses fixes "
+"permet de profiter\n"
+"\t\t\tde configurations s閜ar閑s par client pour les fonctions que fournit "
+"ClusterNFS.\n"
+"\t\t\t\t\t\tRemarque: L'entr閑 \"#type\" est utilis閑 seulement par "
+"drakTermServ. Les clients peuvent 阾re soit\n"
+"\t\t\t\"l間ers\", soit \"lourd\". Les clients l間ers font tourner la plupart "
+"des logiciels sur le serveur via xdmcp, \n"
+"\t\t\ttandis que les clients lourds font tourner eux-m阭es leurs logiciels. "
+"Un fichier inittab sp閏ial, /etc/inittab\\$\\$IP=client_ip\\$\\$ est\n"
+"\t\t\t閏rit pour les clients l間ers. Les fichiers de configuration syst鑝e "
+"xdm-config, kdmrc, et gdm.conf sont modifi閟\n"
+"\t\t\tsi des clients l間ers sont utilis閟, pour pouvoir activer xdmcp. 蓆ant "
+"donn que xdmcp pose des probl鑝es de s閏urit,\n"
+"\t\t\tles fichiers hosts.deny et hosts.allow sont modifi閟 pour limiter "
+"l'acc鑣 au sous-r閟eau local.\n"
+"\t\t\t\n"
+"\t\t\tRemarque: vous devez red閙arrer le serveur apr鑣 avoir ajout ou "
+"modifi des clients.\n"
+"\t\t\t\n"
+" - Maintenir /etc/exports:\n"
+" \t\tClusternfs permet d'exporter la partition racine (/) vers les "
+"clients l間ers. drakTermServ fait les\n"
+" \t\tmodifications n閏essaires pour autoriser les clients l間ers y "
+"acc閐er de fa鏾n anonyme.\n"
+"\n"
+" \t\tUne entr閑 typique dans ce fichier est:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tAvec SUBNET/MASK d閒ini pour votre r閟eau.\n"
+" \t\t\n"
+" - Maintenir /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tPour que les utilisateurs puissent se connecter au syst鑝e "
+"partir d'un client l間er, l'entr閑 leur correspondant\n"
+" \t\tdans /etc/shadow doit 阾re dupliqu閑 dans /etc/shadow\\$\\"
+"$CLIENTS\\$\\$.\n"
+" \t\tDrakTermServ permet cet effet d'ajouter ou de retirer des "
+"utilisateurs de ce fichier.\n"
+"\n"
+" - Fichier par client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tAvec clusternfs, chaque client l間er peut avoir son propre "
+"fichier de configuration unique\n"
+" \t\tsur la partition racine du serveur. DrakTermServ permettra plus "
+"tard de cr閑r ces fichiers.\n"
+"\n"
+" - Fichiers de configuration syst鑝e par client:\n"
+" \t\tAvec clusternfs, chaque client l間er peut avoir ses propres "
+"fichiers de configuration\n"
+" \t\tsur la partition racine du serveur. DrakTermServ permettra plus "
+"tard de cr閑r des fichiers\n"
+" \t\tcomme /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard, s閜ar閟\n"
+" \t\tpour chaque client.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tDrakTermServ peut configurer ces fichiers pour fonctionner en "
+"conjonction avec les images cr閑s par mkinitrd-net,\n"
+" \t\tet les entr閑s dans /etc/dhcpd.conf pour mettre les images "
+"d'amor鏰ge disposition des clients l間ers.\n"
+"\n"
+" \t\tUn fichier de configuration typique ressemble ceci:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tIci les diff閞ences par rapport l'installation par d閒aut sont "
+"le drapeau 'disable' mis 'no'\n"
+" \t\tet le chemin d'acc鑣 tftpboot mis \"/var/lib/tftpboot\", o "
+"mkinitrd-net place ses images.\n"
+"\n"
+" - Cr閑r des disquettes ou CD etherboot:\n"
+" \t\tLes clients l間ers ont besoin d'une image d'amor鏰ge plac閑 sur "
+"la m閙oire morte (ROM) de la carte r閟eau,\n"
+" \t\tou bien d'un CD ou d'une disquette pour initier la s閝uence "
+"d'amor鏰ge. drakTermServ permet de g閚閞er ces images,\n"
+" \t\tbas閑s sur les cartes r閟eaux des machines clientes.\n"
+" \t\t\n"
+" \t\tUn exemple simple de cr閍tion manuelle de disquette d'amor鏰ge "
+"pour une carte 3Com 3c509 consiste taper:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "O d閟irez-vous installer le programme d'amor鏰ge?"
+msgid "512 kB"
+msgstr "512 ko"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Installation de LILO ou Grub"
+msgid "Logs"
+msgstr "Journaux"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Installation de SILO"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(N.B.: les ports parall鑜es ne peuvent 阾re auto-d閠ect閟)"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Passer"
+msgid "<control>N"
+msgstr "<Ctrl>-N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "sur disquette"
+msgid "What kind of card do you have?"
+msgstr "Quel type de carte poss閐ez-vous?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "Premier secteur de la partition racine"
+msgid "<control>O"
+msgstr "<Ctrl>-O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Security"
+msgstr "S閏urit"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-"Vous avez d閏id d'installer le programme d'amor鏰ge sur une partition.\n"
-"Cela implique que vous ayez d閖 un programme d'amor鏰ge sur le disque dur "
-"sur lequel le syst鑝e d閙arre (exemple: System Commander).\n"
-"\n"
-"Quel est le disque de d閙arrage?"
+"Vous pouvez 間alement utiliser l'interface graphique 珷xpdq牷 pour "
+"positionner des options d'impression et administrer les travaux "
+"d'impression.\n"
+"Si vous utiliser le bureau KDE, vous disposez d'un 珷bouton panique牷, une "
+"ic鬾e sur le bureau, nomm 珷STOP Imprimante!牷, qui peut suspendre tous "
+"les travaux d'impression. Ceci peut 阾re utile en cas de bourrage papier, "
+"par exemple.\n"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Cr閍tion de la disquette d'amor鏰ge..."
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ins閞ez une disquette dans le %s"
+msgid "Unknown"
+msgstr "Inconnu"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Choisissez le lecteur de disquette utiliser pour\n"
-"cr閑r votre disquette d'amor鏰ge."
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Ce serveur est d閖 dans la liste, il ne peut pas 阾re rajout.\n"
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Second lecteur de disquette"
+msgid "Network Configuration"
+msgstr "Configuration du r閟eau"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First floppy drive"
-msgstr "Premier lecteur de disquette"
+msgid "<control>S"
+msgstr "<Ctrl>-S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "D閟ol, aucun lecteur de disquette ne semble disponible"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Protocole pour le reste du monde \n"
+"Pas de D-Channel (lignes lou閑s)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "L'option %s 阾re un nombre!"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Notice"
+msgstr "Mode d'emploi"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
msgstr ""
-"Une disquette d'amor鏰ge permet de lancer votre syst鑝e Linux\n"
-"sans utiliser le programme d'amor鏰ge du disque dur.\n"
+"Arguments: (arg)\n"
"\n"
-"C'est utile si vous ne voulez pas installer LILO sur votre syst鑝e,\n"
-"si un autre syst鑝e d'exploitation supprime le programme d'amor鏰ge, ou "
-"encore\n"
-"si ce dernier ne peut 阾re install sur votre machine.\n"
+" Active/D閟active les v閞ifications quotidiennes de s閏urit."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
"\n"
-"Vous pouvez 間alement utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une r閏up閞ation plus ais閑 du syst鑝e en cas de probl鑝es "
-"majeurs.\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Arguments: (arg)\n"
"\n"
-"D閟irez-vous cr閑r une disquette d'amor鏰ge pour votre syst鑝e?\n"
-"%s"
+"Active/D閟active les travaux planifi閟 (crontab et at) pour les "
+"utilisateurs. Mettre les utilisateurs autoris閟 dans /etc/cron.allow et /etc/"
+"at.allow\n"
+"(voir les pages de manuel at(1) et crontab(1))."
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
+"Vous n'avez pas configur le serveur d'affichage (XFree86). 蕋es-vous s鹯 de "
+"ce que vous faites?"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"La configuration de cette imprimante sera effectu閑 automatiquement. Si "
+"votre imprimante n'a pas 閠 correctement d閠ect閑 ou si vous pr閒閞ez "
+"effectuer une configuration personnalis閑, activez 珷Configuration Manuelle "
+"."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Quel type de partitionnement?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
+"liste des fichiers envoy閑 par FTP: %s\n"
+" "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interface"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
+"description des options:\n"
+"\n"
+" - Sauvegarde des fichiers syst鑝es:\n"
+" \n"
+"\tCette option vous permet de sauvegarder votre dossier /etc,\n"
+"\tqui contient tous les fichiers de configuration. Faites attention\n"
+"\tpendant la restauration de ne pas 閏raser:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Sauvegarde des comptes utilisateurs:\n"
+"\n"
+"\tCette option vous permet de choisir les utilisateurs \n"
+"\t sauvegarder.\n"
+"\tPour pr閟erver l'espace disque, il est recommand閈n"
+"\tde ne pas inclure les dossiers 珷cache牷 des navigateurs.\n"
+"\n"
+" - Sauvegarde des autres fichiers: \n"
+"\n"
+"\tCette option vous permet d'ajouter d'autres donn閑s\n"
+"\t sauvegarder. Pour l'instant il n'est pas possible de faire\n"
+"\tune sauvegarde incr閙entale avec cette option.\t\t\n"
+" \n"
+" - Sauvegardes incr閙entales:\n"
+"\n"
+"\tLa sauvegarde incr閙entale est l'option la \n"
+"\tplus puissante pour la sauvegarde. Elle vous permet \n"
+"\tde tout sauver la premi鑢e fois, puis seulement les \n"
+"\tchangements les fois suivantes.\n"
+"\tAinsi vous serez capable de restaurer les donn閑s\n"
+"\tcorrespondant n'importe quelle sauvegarde pr閏閐ente.\n"
+"\t\n"
+"\tSi vous n'avez pas s閘ectionn cette option, toutes\n"
+"\tvos sauvegardes pr閏閐entes sont pr閍lablement effac閑s. \n"
"\n"
"\n"
-"(ATTENTION! Vous utilisez XFS pour votre partition racine,\n"
-"cr閑r une disquette d'amor鏰ge 1.44燤o va probablement 閏houer,\n"
-"parce que XFS a besoin d'un pilote tr鑣 gros)."
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Une disquette d'amor鏰ge permet de lancer votre syst鑝e Linux\n"
-"sans utiliser le programme d'amor鏰ge du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer SILO sur votre syst鑝e,\n"
-"si un autre syst鑝e d'exploitation supprime le programme d'amor鏰ge, ou "
-"encore\n"
-"si ce dernier ne peut 阾re install sur votre machine.\n"
-"\n"
-"Vous pouvez 間alement utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une r閏up閞ation plus ais閑 du syst鑝e en cas de probl鑝es "
-"majeurs.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"Si vous voulez cr閑r une disquette d'amor鏰ge pour votre syst鑝e, ins閞ez \n"
-"une disquette dans le premier lecteur et appuyer sur 珷Ok牷."
+"Active/D閟active les rapports syslog vers la console 12. 珷expr牷 est\n"
+"l'expression d閏rivant quoi rapporter (voir syslog.conf(5) pour plus de "
+"d閠ails) et\n"
+"dev le p閞iph閞ique o faire les rapports."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Vous ne pouvez pas installer le programme d'amor鏰ge\n"
-"sur une partition %s\n"
+msgid "comma separated strings"
+msgstr "cha頽es s閜ar閑s par des virgules"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "il n'y a pas assez de place dans le dossier /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
+"Voici les machines partir desquelles les scanners locauxseront "
+"disponibles:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Demarrage automatique dans %d secondes."
+msgid "Messages"
+msgstr "Messages"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commande de demarrage ou sur <c> pour utiliser la ligne de commande."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Inconnu|CPH06X (bt878) [nombreux vendeurs]"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Appuyez sur <Entree> pour demarrer, sur <e> pour modifier la"
+msgid "POP and IMAP Server"
+msgstr "Serveur POP et IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Utilisez les touches %c et %c pour faire votre choix."
+msgid "Mexico"
+msgstr "Mexique"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bienvenue dans GRUB, le chargeur de systemes d'exploitation"
+msgid "Model stepping"
+msgstr "Num閞o de mod鑜e"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Rwanda"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Poss閐ez-vous des interfaces %s?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO en mode texte"
+msgid "Switzerland"
+msgstr "Suisse"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO en mode graphique"
+msgid "Brunei Darussalam"
+msgstr "Sultanat de Brunei"
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Configuration d'une imprimante Unix (lpd) distante"
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"Bienvenue dans %s, le chargeur de systemes d'exploitation.\n"
+"GNU/Linux est un syst鑝e multiutilisateurs, ce qui signifie g閚閞alement\n"
+"que chaque utilisateur peut avoir des pr閒閞ences diff閞entes, ses propres\n"
+"fichiers, etc. Pour plus d'informations, consultez le 珷Guide de\n"
+"d閙arrage牷. Contrairement 珷root牷 qui a tous les droits, les\n"
+"utilisateurs que vous ajouterez ici n'auront que des permissions pour agir\n"
+"sur leurs propres fichiers exclusivement. L'utilisateur/ administrateur\n"
+"devrait 間alement se cr閑r un compte 珷normal牷. C'est travers cet\n"
+"utilisateur que celui-ci devrait se connecter pour accomplir ses t鈉hes\n"
+"quotidiennes. Car, bien qu'il soit pratique d'avoir tous les acc鑣, cette\n"
+"situation peut 間alement engendrer des situations d閟astreuses si un\n"
+"fichier est d閠ruit par inadvertance. Un utilisateur normal n'ayant pas\n"
+"acc鑣 aux fichiers sensibles, ne peut causer de dommages majeurs.\n"
"\n"
-"Choisissez un systeme d'exploitation dans la liste ci-dessus.\n"
-"-- Demarrage automatique dans %d secondes.\n"
+"Il faut d'abord entrer le vrai nom de la personne. 蓈idemment, vous pouvez\n"
+"y inscrire n'importe quoi. DrakX prendra le premier mot ins閞 et le\n"
+"transposera comme 珷%s牷. C'est le nom qui sera utilis pour se connecter\n"
+"au syst鑝e. Vous pouvez le modifier. Il faut maintenant entrer un mot de\n"
+"passe. Celui-ci n'est pas aussi crucial que le mot de passe de 珷root牷,\n"
+"mais ce n'est pas une raison pour rentrer 123456. Apr鑣 tout, ceci mettrait\n"
+"vos fichiers en p閞il.\n"
+"\n"
+"Apr鑣 avoir cliqu sur 珷%s牷, il vous sera possible d'ajouter d'autres\n"
+"utilisateurs. Cr閑z un utilisateur diff閞ent pour chaque personne devant\n"
+"utiliser votre ordinateur. Une fois chaque utilisateur d閒ini, cliquez sur\n"
+"珷%s牷.\n"
+"\n"
+"En cliquant sur 珷%s牷, vous pourrez s閘ectionner un 珷shell牷 diff閞ent\n"
+"pour cet utilisateur (bash est assign par d閒aut).\n"
"\n"
+"Lorsque vous avez fini d'installer tous les utilisateurs, il vous est\n"
+"propos de choisir un utilisateur qui sera automatiquement connect lors du\n"
+"d閙arrage de l'ordinateur. Si cela vous int閞esse (et que la s閏urit閈n"
+"locale n'est pas trop un probl鑝e), choisissez l'utilisateur et le\n"
+"gestionnaire de fen阾res, puis cliquez sur 珷%s牷. Si cela ne vous\n"
+"int閞esse pas, d閏ochez la case 珷%s牷."
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "le programme 珷consolehelper牷 est introuvable"
+msgid "Configure Internet Access..."
+msgstr "Configurer l'acc鑣 Internet..."
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "le programme 珷kdesu牷 est introuvable"
+msgid "Norway"
+msgstr "Norv鑗e"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures d'閏ran seront disponibles apr鑣 l'installation dans %s"
+msgid "Danish"
+msgstr "Danois"
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Impossible de faire des captures d'閏ran avant le partitionnement"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Activation de la touche 珷Verr Num牷 du pav num閞ique du clavier au "
+"d閙arrage."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d secondes"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Veuillez indiquer la configuration IP de cette machine.\n"
+"Chaque champ doit 阾re compl閠 avec une adresse IP en notation\n"
+"d閏imale point閑 (par exemple, 12.34.56.78)."
-#: ../../common.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minute"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Les paquetages requis l'installation de Mandrake Linux sont distribu閟\n"
+"sur plusieurs CDROM. Heureusement, DrakX conna顃 l'emplacement de chacun\n"
+"des paquetages. Il 閖ectera celui pr閟ent dans le lecteur et vous demandera\n"
+"d'ins閞er le CDROM appropri, selon le cas."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutes"
+msgid "Processors"
+msgstr "Processeurs"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "To"
+msgid "Bulgaria"
+msgstr "Bulgarie"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "Go"
+msgid "No NIC selected!"
+msgstr "Aucune interface r閟eau s閘ectionn閑!"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "Mo"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "蝜es Svalbard et Jan Mayen"
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "Ko"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Des probl鑝es sont apparus pendant la configuration.\n"
+"Testez votre connexion avec le 珷Centre de Contr鬺e Mandrake牷 (dans la "
+"section 珷r閟eau牷) ou la commande 珷net_monitor牷. Si votre connexion ne "
+"fonctionne pas, vous pouvez essayer de relancer la configuration."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "蓆ats-Unis"
+msgid "partition %s is now known as %s"
+msgstr "la partition %s est maintenant connue comme %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "Autriche"
+msgid "Backup Other files..."
+msgstr "Sauvegarde des autres fichiers..."
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "Italie"
+msgid "SMB server IP"
+msgstr "Adresse IP du serveur"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "Pays-Bas"
+msgid "Congo (Kinshasa)"
+msgstr "Congo (Kinshasa)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "Su鑔e"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr ""
+"La table des partitions de %s va maintenant 阾re 閏rite sur le disque!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "Norv鑗e"
+msgid "Installing HPOJ package..."
+msgstr "Installation du paquetage HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "Gr鑓e"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Une disquette d'amor鏰ge permet de lancer votre syst鑝e Linux\n"
+"sans utiliser le programme d'amor鏰ge du disque dur.\n"
+"\n"
+"C'est utile si vous ne voulez pas installer LILO sur votre syst鑝e,\n"
+"si un autre syst鑝e d'exploitation supprime le programme d'amor鏰ge, ou "
+"encore\n"
+"si ce dernier ne peut 阾re install sur votre machine.\n"
+"\n"
+"Vous pouvez 間alement utiliser cette disquette avec l'image de secours "
+"Mandrake.\n"
+"Cela permet une r閏up閞ation plus ais閑 du syst鑝e en cas de probl鑝es "
+"majeurs.\n"
+"\n"
+"D閟irez-vous cr閑r une disquette d'amor鏰ge pour votre syst鑝e?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "Allemagne"
+msgid ", USB printer \\#%s"
+msgstr ", imprimante USB %s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "R閜ublique Tch鑡ue"
+msgid "Latvian"
+msgstr "Letton"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "Belgique"
+msgid "monthly"
+msgstr "tous les mois"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "France"
+msgid "Module name"
+msgstr "Nom du module"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
+msgid "Start at boot"
+msgstr "Lancer au d閙arrage"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Sauvegardes incr閙entales (閏onomie d'espace)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erreur lors de l'ouverture de %s en 閏riture: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Premier secteur du disque (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "Rien faire"
+msgid "Joystick"
+msgstr "Joystick"
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Pas assez d'espace libre pour le partitionnement automatique"
+msgid "El Salvador"
+msgstr "El Salvador"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser de syst鑝e de fichiers crypt pour le point de "
-"montage %s"
+msgid "Use Unicode by default"
+msgstr "Utiliser l'Unicode par d閒aut"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Vous avez besoin d'un vrai syst鑝e de fichiers (ext2/ext3, reiserfs, xfs, ou "
-"jfs) pour ce point de montage\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "le module du noyau GNU/Linux qui g鑢e ce p閞iph閞ique"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ce dossier doit rester dans la partition racine"
+msgid "Trying to rescue partition table"
+msgstr "Tentative de lecture de l'organisation des partitions..."
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser une partition logique LVM pour le point de "
-"montage %s"
+msgid "Option %s must be an integer number!"
+msgstr "L'option %s doit 阾re un nombre entier!"
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Attention, vous avez choisi une partition RAID logiciel comme partition\n"
-"racine (/). Pour que votre syst鑝e puisse d閙arrer, vous devez ajouter\n"
-"une partition non RAID, sp閏ifique pour le dossier /boot."
+"Les champs que vous devrez remplir sont:\n"
+"%s"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Le point de montage %s est d閖 utilis閈n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Impossible de d閙arrer la mise jour!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"Les points de montage ne doivent contenir que des caract鑢es alphanum閞iques"
+msgid "Name: "
+msgstr "Nom: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Les points de montage doivent commencer par /"
+msgid "16 million colors (24 bits)"
+msgstr "16 millions de couleurs (24 bits)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Les partitions ReiserFS doivent faire au moins 32燤o."
+msgid "Allow all users"
+msgstr "Autoriser tous les utilisateurs"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Les partitions JFS doivent faire au moins 16燤o."
+msgid "The official MandrakeSoft Store"
+msgstr "La boutique officielle Mandrake"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Redimensionnement"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Connexion par c鈈le"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Utilisateur"
#: ../../fsedit.pm:1
#, c-format
@@ -1062,1344 +2000,255 @@ msgstr ""
"\n"
"蕋es-vous d'accord pour perdre toutes les partitions de ce disque?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "Erreur"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Nouvelle sauvegarde avant restauration (seulement pour l'incr閙ental)"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "serveur"
+msgid "Printer on parallel port \\#%s"
+msgstr "Imprimante sur le port parall鑜e %s"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "avec /usr"
+msgid "Name"
+msgstr "Nom"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "simple"
+msgid "mkraid failed"
+msgstr "珷mkraid牷 a 閏hou"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Activer la partition d'閏hange %s"
+msgid "Button 3 Emulation"
+msgstr "蒻ulation du bouton n 3"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Le d閙ontage de %s a 閏hou闋: %s"
+msgid "Sending files..."
+msgstr "Envoi des fichiers..."
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "le montage de la partition %s dans le dossier %s a 閏hou"
+msgid "Israeli (Phonetic)"
+msgstr "Isra閘ien (phon閠ique)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "Montage de la partition %s"
+msgid "access to rpm tools"
+msgstr "acc鑣 aux outils rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "V閞ification de %s"
+msgid "edit"
+msgstr "閐iter"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatage de la partition %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Vous devez choisir ou entrer une imprimante ou un p閞iph閞ique!"
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Cr閍tion et formatage du fichier %s"
+msgid "Permission problem accessing CD."
+msgstr "Vous n'avez pas les droits d'acc鑣 au CD."
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Impossible de formater %s au format %s"
+msgid "Phone number"
+msgstr "Num閞o de t閘閜hone"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "le formatage au format %s de %s a 閏hou"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
+"Erreur: le pilote 珷%s牷 pour votre carte son n'est pas dans la liste."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliquez sur 珷Suivant牷 si vous voulez vraiment effacer toute l'information "
-"et\n"
-"les partitions. Soyez prudent, apr鑣 avoir cliqu sur 珷OK牷, vous ne\n"
-"pourrez plus r閏up閞er les donn閑s ou les partitions, y compris les donn閑s\n"
-"Windows.\n"
-"\n"
-"Cliquez 珷Pr閏閐ent牷 pour annuler cette op閞ation sans perdre de donn閑s."
+msgid "Printer name, description, location"
+msgstr "Nom, description, emplacement"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Choisissez le disque dur effacer pour installer votre partition\n"
-"GNU/Linux. Soyez prudent, toute l'information stock閑 sur le disque sera\n"
-"d閠ruite."
+msgid "USA (broadcast)"
+msgstr "USA (hertzien)"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-"On vous pr閟ente ici diverses informations sur la configuration actuelle.\n"
-"Selon le mat閞iel install, certaines entr閑s seront pr閟entes et d'autres\n"
-"pas. Chaque param鑤re est constitu du nom de la configuration, suivi d'un\n"
-"cours r閟um de la configuration actuelle. Cliquez sur le bouton\n"
-"珷Configurer牷 correspondant pour changer cela.\n"
-"\n"
-" * 珷Clavier牷: v閞ifiez la configuration choisie pour le clavier.\n"
-"\n"
-" * 珷Pays牷: v閞ifiez la section du pays. Si vous ne vous trouvez pas\n"
-"dans ce pays, cliquez sur le bouton 珷Configurer牷 et choisissez le bon. Si\n"
-"votre pays ne se trouve pas dans la premi鑢e liste, cliquez sur 珷Plus牷\n"
-"pour avoir la liste compl鑤e.\n"
-"\n"
-" * 珷Fuseau horaire牷: DrakX, par d閒aut, configure le fuseau horaire selon\n"
-"le pays dans lequel vous 阾es.\n"
-"\n"
-" * 珷Souris牷: pour v閞ifier la configuration actuelle de la souris.\n"
-"Cliquez sur le bouton pour modifier les options.\n"
-"\n"
-" * 珷Imprimante牷: en cliquant sur 珷Configurer牷, l'outil de configuration\n"
-"d'impression sera d閙arr. Consultez le chapitre correspondant du 珷Guide\n"
-"de d閙arrage牷 pour plus de renseignements. L'interface qui y est\n"
-"document閑 est similaire celle rencontr閑 lors de l'installation.\n"
-"\n"
-" * 珷Carte son牷 : si une carte son a 閠 d閠ect閑, elle appara顃ra ici. Si\n"
-"vous remarquez que la carte configur閑 n'est pas celle qui se trouve\n"
-"effectivement sur votre syst鑝e, vous pouvez cliquer sur le bouton pour en\n"
-"choisir une autre.\n"
-"\n"
-" * 珷Interface graphique牷 : par d閒aut, DrakX configure votre interface\n"
-"graphique avec une r閟olution de 珷800x600牷 ou 珷1024x768牷. Si cela ne\n"
-"vous convient pas, cliquez sur 珷Configurer牷 pour changer la configuration\n"
-"de votre interface graphique.\n"
-"\n"
-" * 珷Carte TV牷 : si une carte d'entr閑/sortie vid閛 (carte TV) a 閠閈n"
-"d閠ect閑, elle appara顃ra ici. Si vous avez une carte TV et qu'elle n'a pas\n"
-"閠 d閠ect閑, cliquez sur ce bouton pour la configurer la main.\n"
-"\n"
-" * 珷Carte RNIS牷 : si une carte RNIS (ISDN) est d閠ect閑, elle appara顃ra\n"
-"ici. Vous pouvez cliquer sur le bouton pour en modifier les param鑤res.\n"
-"\n"
-" * 珷R閟eau牷 : Si vous souhaitez configurer votre acc鑣 Internet ou r閟eau\n"
-"local d鑣 maintenant.\n"
-"\n"
-" * 珷Niveau de s閏urit闋: il vous est ici propos de red閒inir votre\n"
-"niveau de s閏urit tel que d閒ini dans une 閠ape pr閏閐ente ().\n"
-"\n"
-" * 珷Pare-feu牷 : si vous avez l'intention de connecter votre ordinateur 郳n"
-"Internet, c'est une bonne id閑 de le prot間er des intrusions gr鈉e un\n"
-"pare-feu. Consultez la section correspondante du 珷Guide de d閙arrage牷\n"
-"pour plus de renseignements.\n"
-"\n"
-" * 珷Chargeur de d閙arrage牷 : Si vous souhaitez changer la configuration\n"
-"par d閒aut de votre chargeur de d閙arrage. r閟erver aux utilisateurs\n"
-"exp閞iment閟.\n"
-"\n"
-" * 珷Services牷 : vous pourrez ici contr鬺er finement les services\n"
-"disponibles sur votre machine. si vous envisagez de monter un serveur,\n"
-"c'est une bonne id閑 de v閞ifier cette configuration."
+"Please choose the\n"
+"media for backup."
+msgstr "Quelle sauvegarde sera p閞iodique?"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"珷Carte son牷 : si une carte son a 閠 d閠ect閑, elle appara顃ra ici. Si\n"
-"vous remarquez que la carte configur閑 n'est pas celle qui se trouve\n"
-"effectivement sur votre syst鑝e, vous pouvez cliquer sur le bouton pour en\n"
-"choisir une autre."
+msgid "Use Xinerama extension"
+msgstr "R閜artir l'affichage sur plusieurs 閏rans (Xinerama)"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"珷Yaboot牷 est un programme d'amor鏰ge pour les Macintosh dot閟 de\n"
-"l'architecture NewWorld (iMac, G3, G4, PowerBook G3 Series 99, iBook, etc.)\n"
-"Il est capable de faire d閙arrer GNU/Linux, MacOS, ou MacOSX, si\n"
-"ces syst鑝es sont pr閟ents sur votre ordinateur. Normalement, les\n"
-"syst鑝es d'exploitation d閖 pr閟ents devraient avoir 閠 d閠ect閟.\n"
-"Si ce n'est pas le cas, vous pouvez ajouter manuellement l'entr閑 manquante\n"
-"sur cet 閏ran. Veuillez faire attention de choisir les bons param鑤res.\n"
-"\n"
-"Les principales options de Yaboot sont:\n"
-"\n"
-"- Message de d閙arrage: un simple texte, affich avant l'invite "
-"d'amor鏰ge.\n"
-"\n"
-"- P閞iph閞ique d'amor鏰ge: indique o vous souhaitez installer le\n"
-"programme d'amor鏰ge. G閚閞alement, vous aurez configur auparavant\n"
-"une partition d'amor鏰ge (bootstrap) pour contenir ces informations.\n"
-"\n"
-"- D閘ai de l'OpenFirmware: la diff閞ence de LILO, il y a deux\n"
-"d閘ais disponibles avec Yaboot. Pendant le premier (mesur en secondes),\n"
-"vous pouvez choisir entre CD, OF, MacOS, et Linux.\n"
-"\n"
-"- D閘ai d'amor鏰ge du noyau: ce d閘ai est similaire celui de\n"
-"LILO. Apr鑣 avoir s閘ectionn Linux, vous aurez ce d閘ai (en dixi鑝es\n"
-"de seconde) avant d'accepter les param鑤res noyau par d閒aut.\n"
-"\n"
-"- Autoriser l'amor鏰ge sur CD?: si vous activez cette option, vous\n"
-"pourrez choisir 'C' pour le CD, la premi鑢e invite d'amor鏰ge.\n"
-"\n"
-"- Autoriser l'amor鏰ge sur l'OF?: si vous activez cette option, vous\n"
-"pourrez choisir 'N' pour l'OpenFirmware la premi鑢e invite d'amor鏰ge.\n"
-"\n"
-"- choix par d閒aut: vous pouvez s閘ectionner quel syst鑝e d閙arrera par\n"
-"d閒aut apr鑣 expiration du d閘ai de l'Open Firmware."
+msgid "Loopback"
+msgstr "Bouclage"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-"Vous pouvez ajouter des entr閑s suppl閙entaires dans 珷yaboot牷, soit\n"
-"pour d閙arrer un autre syst鑝e d'exploitation, soit pour des noyaux de\n"
-"secours.\n"
-"\n"
-"Pour les autres syst鑝es, l'entr閑 consiste en un label et la partition "
-"racine.\n"
-"\n"
-"Pour Linux, voici les options possibles:\n"
-"\n"
-"- label: le nom que vous devrez taper au message d'invite de yaboot pour\n"
-" activer cette option d'amor鏰ge. \n"
-"\n"
-"- Image: c'est le nom du noyau amorcer. Typiquement 珷vmlinux牷 ou \n"
-" une variation de vmlinux avec une extension. \n"
-"\n"
-"- racine: le p閞iph閞ique racine ou 珷/牷 pour votre installation Linux. \n"
-"\n"
-"- options pass閑s au noyau: sur les mat閞iels Apple, des options sont\n"
-" souvent transmises au noyau pour l'initialisation de la carte graphique,\n"
-" ou pour activer l'閙ulation (au clavier) des deux boutons qui manquent\n"
-" souvent aux souris d'Apple. Voici quelques exemples: \n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"- Fichier RamDisk: cette option peut 阾re utilis閑 pour charger des\n"
-" modules avant que le p閞iph閞ique d'amor鏰ge ne soit disponible, ou\n"
-" pour charger une image ramdisk pour un d閙arrage de secours.\n"
-"\n"
-"- Taille du RamDisk: la taille par d閒aut est g閚閞alement de 4096 ko.\n"
-" Si vous voulez une taille plus grande, utilisez cette option.\n"
-"\n"
-"- Pr閍ctiv en 閏riture: normalement, la partition racine est initialement\n"
-" mont閑 en mode lecture seulement, pour v閞ifier le syst鑝e de fichier\n"
-" avant qu'il ne soit activ. Avec cette option, vous pouvez autoriser la\n"
-" partition racine 阾re mont閑 directement en mode 閏riture.\n"
-"\n"
-"- NoVideo: si la carte graphique devait poser trop de probl鑝es, vous \n"
-" pouvez activer cette option pour d閙arrer en mode 珷framebuffer牷 natif.\n"
-"\n"
-"- D閒aut: s閘ectionne cette entr閑 comme choix par d閒aut, activ en \n"
-" pressant juste <Entr閑> au message d'invite de 珷yaboot牷. C'est cette\n"
-" entr閑 qui sera pr閏閐閑 d'une 閠oile si vous pressez <Tab> pour voir\n"
-" la liste des possibilit閟 avant l'amor鏰ge."
+"Ne peut terminer correctement mkbootdisk: \n"
+" %s \n"
+" %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX d閠ecte maintenant tous les p閞iph閞iques IDE pr閟ents sur votre\n"
-"syst鑝e. DrakX recherchera aussi les p閞iph閞iques SCSI. Finalement, selon\n"
-"les composantes d閠ect閑s, DrakX installera tous les pilotes n閏essaires 郳n"
-"son fonctionnement.\n"
-"\n"
-"Compte tenu de la vaste gamme de p閞iph閞iques disponibles sur le march,\n"
-"dans certains cas la d閠ection de mat閞iel ne fonctionnera pas. Si c'est le\n"
-"cas, vous devrez alors configurer votre mat閞iel la main.\n"
-"\n"
-"Si vous devez configurer votre carte SCSI manuellement, DrakX vous\n"
-"demandera si vous souhaitez sp閏ifier la main les options du\n"
-"p閞iph閞ique. Laissez en fait DrakX chercher automatiquement les options\n"
-"n閏essaires la configuration de votre carte, cela fonctionne\n"
-"g閚閞alement.\n"
-"\n"
-"Il peut arriver que DrakX soit incapable de v閞ifier les options\n"
-"n閏essaires. Dans ce cas, vous devrez les d閠erminer manuellement."
+msgid "West Europe"
+msgstr "Europe de l'ouest"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-"Il faut choisir ici un syst鑝e d'impression pour votre ordinateur. D'autres\n"
-"OSs offrent un, Mandrake Linux en propose deux.\n"
-"\n"
-" * 珷pdq牷 - qui veut dire 珷print, don't queue牷, (ou, impression sans\n"
-"passer par la file d'attente) est un bon choix si votre imprimante est\n"
-"branch閑 directement sur votre poste et que vous voulez pouvoir arr阾er\n"
-"l'impression directement en cas de probl鑝e et que vous n'avez pas\n"
-"d'imprimantes r閟eau. Il prendra en charge de simples cas en r閟eau, mais\n"
-"les performances sont plut魌 mauvaises dans ces cas. Choisissez pdq si vous\n"
-"阾es une premi鑢e exp閞ience avec Linux. Vous pourrez toujours changer de\n"
-"syst鑝e plus tard avec PrinterDrake partir du Centre de contr鬺e Mandrake\n"
-"en cliquant sur 珷Expert牷.\n"
-"\n"
-" * 珷CUPS牷 - 珷Common Unix Printing System牷, est fabuleux tant pour\n"
-"imprimante local que pour imprimer l'autre bout du monde. C'est simple et\n"
-"il peu agir comme serveur ou un client avec l'ancien syst鑝e d'impression\n"
-"珷lpd牷. Il s'agit d'un outil tr鑣 puissant, mais les configurations de\n"
-"bases sont aussi simple que pdq. Pour 閙uler un serveur lpq, partez le\n"
-"d閙on (珷daemon牷) cups-lpq. Finalement, cups offre une interface simple\n"
-"pour imprimer et choisir les imprimantes.\n"
+"[OPTIONS] [NOM_PROGRAMME]\n"
"\n"
-"Vous pourrez changer ult閞ieurement de syst鑝e d'impression en lan鏰nt\n"
-"PrinterDrake depuis le Mandrake Control Center."
+"OPTIONS:\n"
+" --help - affiche ce message.\n"
+" --report - le programme doit 阾re un outil mandrake\n"
+" --incident - le programme doit 阾re un outil mandrake"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-"LILO et grub sont deux programmes d'amorce pour GNU/Linux. Cette 閠ape est\n"
-"normalement compl鑤ement automatique. En fait, DrakX analyse le secteur de\n"
-"d閙arrage (master boot record) et agit en fonction de ce qu'il peut y lire\n"
-":\n"
-"\n"
-" * Si un secteur de d閙arrage Windows est d閠ect, il sera remplac par\n"
-"grub/LILO. Donc, vous serez capable de d閙arrer GNU/Linux et tout autre\n"
-"syst鑝e d'exploitation.\n"
-"\n"
-" * si grub ou LILO est d閠ect, il sera remplac par la nouvelle version;\n"
-"\n"
-"En cas de doute, DrakX affiche diff閞entes options.\n"
-"\n"
-"珷P閞iph閞ique d'amor鏰ge牷 : dans la plupart des cas vous ne devrez pas\n"
-"changer la configuration propos閑 (珷Premier secteur du lecteur (MBR)牷),\n"
-"mais si vous pr閒閞ez, le chargeur peut 阾re install sur le deuxi鑝e\n"
-"disque (珷/dev/hdb牷), ou m阭e sur une disquette (珷Sur disquette牷)."
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 version %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"Apr鑣 avoir configur les param鑤res g閚閞aux de LILO ou grub la liste des\n"
-"options de d閙arrage sera rendue disponible au d閙arrage.\n"
-"\n"
-"Si d'autres syst鑝es d'exploitation sont d閠ect閟, il seront\n"
-"automatiquement ajout閟 au menu d閙arrage. Vous pouvez ici affiner votre\n"
-"configuration. Cliquez sur 珷Ajouter牷 pour cr閑r une nouvelle entr閑;\n"
-"Choisissez une entr閑, cliquez 珷Modifier牷 pour l'閐iter, ou 珷Supprimer牷\n"
-"pour l'enlever. 珷OK牷 validera vos changements.\n"
-"\n"
-"Il est possible que vous vouliez limiter l'acc鑣 ce syst鑝e\n"
-"d'exploitation. Il vous suffit de retirer l'entr閑 dans les options de\n"
-"d閙arrage et d閙arrer ce syst鑝e avec une disquette."
+msgid "Copying %s"
+msgstr "Copie de %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-"Ce dialogue permet de contr鬺er finement le chargeur de d閙arrage :\n"
-"\n"
-" * 珷Programme d'amor鏰ge utiliser牷 vous propose trois choix :\n"
-"\n"
-" * 珷GRUB牷 : si vous pr閒閞ez GRUB (menu texte).\n"
-"\n"
-" * 珷LILO en mode texte牷 : si vous pr閒閞ez la version texte de LILO.\n"
-"\n"
-" * 珷LILO en mode graphique牷 : si vous pr閒閞ez l'interface graphique.\n"
-"\n"
-" * 珷P閞iph閞iques de d閙arrage牷: dans la plupart des cas, vous n'aurez\n"
-"pas changer le disque par d閒aut (珷/dev/hda牷, mais si vous le d閟irez,\n"
-"le programme d'amorce peut 阾re install sur un second disque,\n"
-"珷/dev/hdb牷, ou m阭e sur une disquette, 珷/dev/fd0牷.\n"
-"\n"
-" * 珷D閘ais avant l'activation du choix par d閒aut牷: au red閙arrage de\n"
-"l'ordinateur, il s'agit du temps accord l'utilisateur pour d閙arrer un\n"
-"autre syst鑝e d'exploitation.\n"
-"\n"
-"!! Prenez garde, si vous d閏idez de ne pas installer de programme d'amorce\n"
-"(en cliquant sur 珷Passer牷), vous devez vous assurer d'avoir une m閠hode\n"
-"pour d閙arrer le syst鑝e. Aussi, assurez-vous de bien savoir ce que vous\n"
-"faites si vous modifiez les options. !!\n"
-"\n"
-"En cliquant sur 珷Avanc閑牷, vous aurez acc鑣 plusieurs autres options de\n"
-"configuration. Sachez que celles-ci sont r閟erv閑s aux experts en la\n"
-"mati鑢e."
+msgid "Choose color"
+msgstr "Choisissez une couleur"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Vous devez prendre ici une d閏ision cruciale pour la s閏urit de votre\n"
-"syst鑝e. L'utilisateur 珷root牷 est l'administrateur du syst鑝e qui a tous\n"
-"les droits d'acc鑣 aux fichiers de configuration, etc. Il est donc\n"
-"imp閞atif de choisir un mot de passe difficile deviner (pensez aux\n"
-"syst鑝es pr関us cet effet qui anticipent les combinaisons communes des\n"
-"utilisateurs). DrakX vous avertira si le mot de passe entr est trop facile\n"
-" deviner. Comme vous pouvez le voir, il est 間alement possible de ne pas\n"
-"entrer de mot de passe. Nous d閏onseillons fortement cette pratique. Comme\n"
-"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
-"d閠ruire sur votre syst鑝e, c'est pourquoi le mot de passe doit agir comme\n"
-"barri鑢e l'entr閑.\n"
-"\n"
-"Le mot de passe choisi devrait contenir au moins 8 caract鑢es\n"
-"alphanum閞iques. Ne jamais 閏rire un mot de passe, forcez-vous vous en\n"
-"souvenir par coeur. Il faut donc m閚ager accessibilit et m閙oire, donc un\n"
-"mot de passe de 30 caract鑢es est presque impossible m閙oriser.\n"
-"\n"
-"Afin d'関iter les regards indiscrets, le mot de passe n'appara顃ra pas 郳n"
-"l'閏ran. Il vous faudra donc l'inscrire deux fois afin d'関iter les erreurs\n"
-"de frappe. 蓈idemment, si vous faites deux fois la m阭e erreur, celle-ci\n"
-"sera sauvegard閑 et vous devrez la reproduire afin d'acc閐er votre\n"
-"syst鑝e pour la premi鑢e fois.\n"
-"\n"
-"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
-"serveur d'authentification, tel que NIS ou LDAP. Si votre r閟eau utilise un\n"
-"de ces protocoles, il faut le s閘ectionner. Si vous n'en avez aucune id閑,\n"
-"demandez votre administrateur de r閟eau.\n"
-"\n"
-"Si vous souhaitez que l'acc鑣 cette machine soit contr鬺 par un serveur\n"
-"d'authentification, cliquez sur le bouton 珷Avanc闋.\n"
-"\n"
-"Si votre r閟eau utilise soit LDAP, NIS, ou un PDC Windows, choisissez-le\n"
-"comme protocole d'authentification. En cas de doute, demandez votre\n"
-"administrateur r閟eau.\n"
-"\n"
-"Si vous avez des probl鑝es vous souvenir de vos mots de passe, vous\n"
-"pouvez choisir 珷Pas de mot de passe牷, si votre ordinateur ne sera pas\n"
-"connect Internet, et si vous avez confiance en tous ceux qui auront\n"
-"acc鑣 cette machine."
+msgid "Dominican Republic"
+msgstr "Dominique"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"S閘ectionnez le bon port. Par exemple: l'閝uivalent du port 珷COM1牷 sur\n"
-"Windows, se nomme 珷ttyS0牷 sous GNU/Linux."
+msgid "Swaziland"
+msgstr "Swaziland"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"DrakX d閠ecte g閚閞alement le nombre de boutons de votre souris. Sinon, il\n"
-"prend pour acquis que vous avez une souris deux boutons et configurera\n"
-"l'閙ulation du troisi鑝e bouton. De plus, DrakX saura automatiquement si\n"
-"vous avez une souris PS/2, s閞ie ou USB.\n"
-"\n"
-"Si vous d閟irez installer une souris diff閞ente, veuillez la s閘ectionner 郳n"
-"partir de la liste qui vous est propos閑.\n"
-"\n"
-"Si vous s閘ectionnez une souris diff閞ente de celle choisie par d閒aut,\n"
-"DrakX vous pr閟entera un 閏ran de test. Utilisez les boutons et la molette\n"
-"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
-"fonctionne pas normalement, appuyez sur la barre d'espacement ou la touche\n"
-"[Entr閑] pour annuler le test et retourner la liste de choix de la\n"
-"souris.\n"
-"\n"
-"Les souris roulette ne sont pas d閠ect閑s parfois. Vous devrez alors\n"
-"s閘ectionner manuellement une souris dans la liste. Assurez vous de choisir\n"
-"celle qui correspond votre mod鑜e et au bon port de connexion. Apr鑣\n"
-"avoir press le bouton 珷OK牷, une image de souris appara顃. Vous devez\n"
-"alors faire tourner la molette afin de l'activer correctement. Testez alors\n"
-"que tous les mouvements et boutons fonctionnent correctement."
+msgid "Set-UID"
+msgstr "Set-UID"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"La premi鑢e 閠ape consiste choisir votre langue.\n"
-"\n"
-"Le choix de la langue sera appliqu la documentation, l'installation et\n"
-"le syst鑝e en g閚閞al. Commencez par choisir la r間ion o vous vous situez,\n"
-"puis la langue que vous parlez.\n"
-"\n"
-"En cliquant sur 珷Avanc闋, le programme vous proposera 間alement des\n"
-"langues compl閙entaires pouvant 阾re install閑s sur votre station de\n"
-"travail. En choisissant des langues suppl閙entaires, le programme vous\n"
-"installera toute la documentation et les applications n閏essaires 郳n"
-"l'utilisation de ces langues. Par exemple, si vous pr関oyez d'accueillir\n"
-"des utilisateurs d'Espagne sur votre machine, choisissez le fran鏰is comme\n"
-"langue principale dans l'arborescence, et 珷Espa駉l牷, dans la section\n"
-"avanc閑.\n"
-"\n"
-"Remarquez que vous n'阾es pas limit une langue suppl閙entaire. Vous\n"
-"pouvez en choisir plusieurs, ou m阭e les installer toutes en choisissant\n"
-"珷Toutes les langues牷. Choisir le support pour une langue signifie ajouter\n"
-"les traductions, les polices, correcteurs orthographiques, etc. La case\n"
-"珷Utiliser Unicode par d閒aut牷 force le syst鑝e utiliser l'encodage\n"
-"unicode (UTF-8). Mais c'est une fonctionnalit exp閞imentale. Toutefois, si\n"
-"vous s閘ectionnez des langages qui n閏essitent des encodages incompatibles,\n"
-"le support unicode sera install de toutes fa鏾ns.\n"
-"\n"
-"Pour passer d'une langue l'autre, vous pouvez lancer l'utilitaire\n"
-"珷/usr/sbin/localedrake牷 en tant que 珷root牷 pour changer la langue\n"
-"utilis閑 dans tout le syst鑝e ; connectez-vous en simple utilisateur pour\n"
-"ne changer que la langue de cet utilisateur."
+msgid "Please check if you are using CDRW media"
+msgstr "CD R閕nscriptible"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-"Selon la langue principale que vous avez choisie l'閠ape , DrakX\n"
-"s閘ectionne le clavier appropri. Cela dit, il est possible que vous ayez\n"
-"un clavier ne correspondant pas exactement votre langue d'utilisation.\n"
-"Par exemple, si vous habitez le Qu閎ec et parlez le fran鏰is et l'anglais,\n"
-"vous pouvez vouloir avoir votre clavier anglais pour les t鈉hes\n"
-"d'administration syst鑝e et votre clavier fran鏰is pour 閏rire de la\n"
-"po閟ie. Dans ces cas, il vous faudra revenir cette 閠ape d'installation\n"
-"et s閘ectionner un autre clavier partir de la liste.\n"
-"\n"
-"Cliquez sur 珷Davantage牷 pour voir toutes les options propos閑s.\n"
-"\n"
-"Si vous choisissez un clavier bas sur un alphabet non-latin, on vous\n"
-"demandera au prochain 閏ran de choisir la combinaison de cl閟 permettant\n"
-"d'alterner entre ceux-ci."
+"Choisissez le disque dur effacer pour installer votre partition\n"
+"GNU/Linux. Soyez prudent, toute l'information stock閑 sur le disque sera\n"
+"d閠ruite."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"Cette 閠ape ne s'affiche que si une partition GNU/Linux a 閠 d閠ect閑 sur\n"
-"votre disque dur.\n"
-"\n"
-"DrakX doit maintenant savoir quel type d'installation vous d閟irez\n"
-"r閍liser. Deux types d'installations sont propos閟 : Par d閒aut (珷\n"
-"Recommand閑牷), qui limite le nombre de questions l'utilisateur au\n"
-"minimum ou 珷Expert牷 qui vous permet de s閘ectionner individuellement\n"
-"chacune des composantes installer. Il vous est 間alement propos de faire\n"
-"une 珷Installation牷 ou une 珷Mise jour牷 d'un syst鑝e Mandrake Linux\n"
-"d閖 install :\n"
-"\n"
-" * 珷Installation牷 : Remplace l'ancien syst鑝e. En fait, selon ce que\n"
-"votre machine comporte, vous pourrez garder intactes certaines des\n"
-"anciennes partitions (Linux ou autres) ;\n"
-"\n"
-" * 珷Mise jour牷 : cette classe d'installation permet de mettre jour\n"
-"seulement les paquetages qui composent votre syst鑝e Mandrake Linux. Elle\n"
-"conserve les partitions existantes, ainsi que la configuration des\n"
-"utilisateurs. La plupart des autres 閠apes d'une installation classique\n"
-"sont accessibles ;\n"
-"\n"
-"La mise jour devrait fonctionner correctement pour les syst鑝e Mandrake\n"
-"Linux partir de la version 珷8.1牷. Essayer de lancer une mise jour sur\n"
-"les versions ant閞ieures 珷8.1牷 n'est pas recommand."
+msgid " on parallel port \\#%s"
+msgstr " sur port parall鑜e %s"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"珷Pays牷: v閞ifiez la section du pays. Si vous ne vous trouvez pas dans\n"
-"ce pays, cliquez sur le bouton 珷Configurer牷 et choisissez le bon. Si\n"
-"votre pays ne se trouve pas dans la premi鑢e liste, cliquez sur 珷Plus牷\n"
-"pour avoir la liste compl鑤e."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Utilisez les touches %c et %c pour faire votre choix."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Plus d'une partition Windows ont 閠 d閠ect閑s sur votre disque dur. SVP,\n"
-"veuillez choisir celle que vous choisissez pour votre nouvelle installation\n"
-"de Mandrake Linux.\n"
-"\n"
-"Chaque partition est identifi閑 comme suit: \"Nom linux\", \"Nom Windows\",\n"
-"\"Capacit閈".\n"
-"\n"
-"Le \"Nom\" est structur ainsi : \"type de disque dur\", \"num閞o du disque\n"
-"dur\", \"num閞o de partition\". Par exemple, 珷hda1牷.\n"
-"\n"
-"Le \"Type de disque dur\" correspond hd si votre disque est IDE. Pour un\n"
-"disque SCSI, vous lirez \"sd\".\n"
-"\n"
-"Le num閞o du disque est toujours list apr鑣 le \"hd\" ou \"fd\". Pour les\n"
-"disques IDE :\n"
-"\n"
-" * \"a\" signifie \"disque primaire ma顃re sur le premier contr鬺eur IDE\";\n"
-"\n"
-" * \"b\" signifie \"disque primaire esclave sur le premier contr鬺eur\n"
-"IDE\";\n"
-"\n"
-" * \"c\" indique \"disque primaire ma顃re sur le second contr鬺eur IDE\";\n"
-"\n"
-" * \"d\" signifie \"disque primaire esclave sur le second contr鬺eur IDE\";\n"
-"\n"
-"Avec les disques SCSI, le \"a\" indique le plus petit SCSI ID, et ainsi de\n"
-"suite.\n"
-"\n"
-"\"Windows name\" c'est la lettre assign閑 votre disque, (le premier\n"
-"disque ou partition \"C:\")"
+msgid "Generic 2 Button Mouse"
+msgstr "Souris standard 2 boutons"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-" cette 閠ape, vous devez s閘ectionner quelle partition sera utilis閑 pour\n"
-"votre syst鑝e Mandrake Linux. Si votre disque est d閖 partitionn, soit\n"
-"par une autre installation GNU/Linux ou par un autre outil de\n"
-"partitionnement, vous pourrez les utiliser. Sinon, les partitions devront\n"
-"阾re cr殚es.\n"
-"\n"
-"Pour cr閑r une partition, vous devez d'abord s閘ectionner le disque 郳n"
-"utiliser. Vous pouvez le s閘ectionner en cliquant sur 珷hda牷 pour le\n"
-"premier disque IDE, 珷hdb牷, pour le second, 珷sda牷 pour le premier disque\n"
-"SCSI, et ainsi de suite.\n"
-"\n"
-"Pour partitionner, le disque dur s閘ectionn, vous pouvez utiliser les\n"
-"options suivantes :\n"
-"\n"
-" * 珷Tout effacer牷: cette option effacera toutes les partitions sur le\n"
-"disque s閘ectionn;\n"
-"\n"
-" * 珷Attribution Automatique牷: cette option permet de cr閑r un syst鑝e de\n"
-"ficher ext3 et 珷Swap牷 dans l'espace libre sur votre disque;\n"
-"\n"
-"珷Plus d'options牷: permet d'acc閐er des fonctionnalit閟 additionnelles :\n"
-"\n"
-" * 珷Sauvegarder la table de partition牷: sauve la table de partition sur\n"
-"un disque amovibles. Cette option s'av鑢e particuli鑢ement pratique pour\n"
-"r閜arer des partitions endommag閑s. Il est fortement recommand de proc閐er\n"
-"ainsi;\n"
-"\n"
-" * 珷Restaurer la table de partition牷: permet de restaurer une table de\n"
-"partition sauv閑 au pr閍lable sur une disquette.\n"
-"\n"
-" * 珷R閏up閞er une partition牷: si votre table de partition est endommag閑,\n"
-"vous pouvez essayer de la r閏up閞er avec ces options. Soyez prudent et\n"
-"sachez que cela ne fonctionne pas coup s鹯.\n"
-"\n"
-" * 珷Recharger la table de partition牷: 閏arte les changements et charge la\n"
-"table de partition initiale;\n"
-"\n"
-" * 珷Chargement automatique des m閐ias amovibles牷: en cochant cette case,\n"
-"les CD-ROM et disquettes (et autres support) seront charg閟\n"
-"automatiquement.\n"
-"\n"
-" * 珷Assistant牷: utilisez cette option si vous souhaitez utiliser un\n"
-"assistant pour partitionner votre disque. Cette option est particuli鑢ement\n"
-"recommand閑 si vous faites vos premiers pas avec les partitions.\n"
-"\n"
-" * 珷D閒aire牷: utilisez cette option pour annuler vos changements;\n"
-"\n"
-" * 珷 Changez de mode normal/expert牷: permet des actions additionnelles\n"
-"sur les partitions (type, options, format) et donne plus d'informations;\n"
-"\n"
-" * 珷Terminer牷: une fois le partitionnement termin, ce bouton vous\n"
-"permettra de sauvegarder vos changements sur le disque.\n"
-"\n"
-"Lorsque vous d閒inissez la taille d'une partition, vous pouvez choisir\n"
-"pr閏is閙ent la taille de celle-ci en utilisant les Fl鑓hes de votre\n"
-"clavier.\n"
-"\n"
-"Note: vous pouvez atteindre toutes les options en utilisant le clavier.\n"
-"Naviguer avec les fl鑓hes et [Tab].\n"
-"\n"
-"Une fois la partition s閘ectionn閑, vous pouvez utiliser :\n"
-"\n"
-" * Ctrl-c pour cr閑r un nouvelle partition (lorsqu'une partition vide est\n"
-"s閘ectionn閑;\n"
-"\n"
-" * Ctrl-d pour effacer une partition;\n"
-"\n"
-" * Ctrl-m pour d閒inir le 珷mount point牷\n"
-"\n"
-"Pour obtenir plus d'information sur les syst鑝es de fichiers, veuillez lire\n"
-"sur le syst鑝e de fichier ext2FS dans 珷Manuel de r閒閞ence牷.\n"
-"\n"
-"Si vous installez sur un poste PPC, vous devrez cr閑r une petite partition\n"
-"HFS 珷bootstrap牷 d'au moins 1 Mo qui sera utilis閑 par le chargeur de\n"
-"d閙arrage (珷bootloader牷) yaboot. Si vous optez pour une partition plus\n"
-"grande, disons 50Mo, vous trouverez utile d'y placer des noyaux et des\n"
-"images 珷ramdisk牷 accessibles en cas de probl鑝e."
+msgid "Remove the logical volumes first\n"
+msgstr "Enlevez d'abord les volumes logiques\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-" cette 閠ape, vous devrez d閠erminer le niveau de s閏urit requis par\n"
-"votre syst鑝e. Le niveau de s閏urit requis se d閠ermine en fonction de\n"
-"l'exposition du syst鑝e d'autres utilisateurs (s'il est connect閈n"
-"directement sur Internet par exemple) et selon le niveau de sensibilit de\n"
-"l'information contenu dans le syst鑝e (des num閞os de carte de cr閐it par\n"
-"exemple). Sachez que, de mani鑢e g閚閞ale, plus la s閏urit d'un syst鑝e\n"
-"est 閘ev閑, plus il est complexe utiliser.\n"
-"\n"
-"Si vous ne savez pas quel niveau choisir, gardez la s閘ection par d閒aut."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Demarrage automatique dans %d secondes."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-"Au moment o vous 阾es en train d'installer Mandrake Linux, il est possible\n"
-"que certains paquetages aient 閠 mis jour depuis la sortie du produit.\n"
-"Des bogues ont pu 阾re corrig閟, et des probl鑝es de s閏urit r閟olus. Pour\n"
-"vous permettre de b閚閒icier de ces mises jour, il vous est maintenant\n"
-"propos de les t閘閏harger depuis Internet. Choisissez 珷Oui牷 si vous avez\n"
-"une connexion Internet, ou 珷Non牷 si vous pr閒閞ez installer les mises 郳n"
-"jour plus tard.\n"
-"\n"
-"En choisissant 珷Oui牷, la liste des sites depuis lesquels les mises jour\n"
-"peuvent 阾re t閘閏harg閑s est affich閑. Choisissez le site le plus proche.\n"
-"Puis un arbre de choix des paquetages appara顃 : v閞ifiez la s閘ection,\n"
-"puis cliquez sur 珷Installer牷 pour t閘-charger et installer les mises 郳n"
-"jour s閘ectionn閑s, ou 珷Annuler牷 pour abandonner."
+"Impossible d'閏rire dans /etc/sysconfig/bootsplash\n"
+"Fichier non trouv"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Acc鑣 internet"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Les partitions ayant 閠 nouvellement d閒inies doivent 阾re format閑s (ce\n"
-"qui implique la cr閍tion d'un syst鑝e de fichiers).\n"
-"\n"
-"Lors de cette 閠ape, vous pouvez reformater des partitions existantes pour\n"
-"effacer les donn閑s pr閟entes. Vous devrez alors les s閘ectionner\n"
-"間alement.\n"
-"\n"
-"Sachez qu'il n'est pas n閏essaire de reformater toutes les partitions\n"
-"existantes. Vous devez formater les partitions contenant le syst鑝e\n"
-"d'exploitation (comme 珷/牷,珷 /usr牷 ou 珷/var牷, mais il n'est pas\n"
-"n閏essaire de formater les partitions de donn閑s, notamment 珷/home牷...\n"
-"\n"
-"Soyez prudent. Une fois que les partitions s閘ectionn閑s seront\n"
-"reformat閑s, il sera impossible de r閏up閞er des donn閑s.\n"
-"\n"
-"Cliquez sur 珷OK牷 lorsque vous 阾es pr阾 formater les partitions.\n"
-"\n"
-"Cliquez sur 珷Annuler牷 pour ajouter ou enlever une partition formater.\n"
-"\n"
-"Cliquer sur 珷Avancer牷 si vous d閟irez s閘ectionner des partitions pour\n"
-"une v閞ification des secteurs d閒ectueux (珷Bad Blocks牷)."
+"coordonn閑s y de la zone de texte\n"
+"en nombre de caract鑢es"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-"Votre installation de Mandrake Linux est maintenant termin閑 et votre\n"
-"syst鑝e est pr阾 阾re utilis. Cliquez sur 珷OK牷 pour red閙arrer votre\n"
-"syst鑝e. Vous aurez alors le choix de d閙arrer GNU/Linux ou Windows (s'il\n"
-"est pr閟ent).\n"
-"\n"
-"Le bouton 珷Avanc閑牷 (en mode Expert uniquement) permet deux autres\n"
-"options :\n"
-"\n"
-" * 珷G閚閞er une disquette d'auto-install牷: Pour cr閑r une disquette\n"
-"d'installation qui permettra de reproduire l'installation que vous venez de\n"
-"r閍liser sans l'aide d'un administrateur.\n"
-"\n"
-" Notez que les deux options suivantes apparaissent apr鑣 avoir cliqu sur\n"
-"le bouton :\n"
-"\n"
-" * 珷Replay牷. C'est une installation partiellement automatique o il\n"
-"est possible de personnaliser le partitionnement du disque (exclusivement).\n"
-"\n"
-" * 珷Automatique牷. Compl鑤ement automatique, cette installation\n"
-"reformate le disque au complet.\n"
-"\n"
-" Cette fonctionnalit est particuli鑢ement pratique pour l'installation\n"
-"de multiples syst鑝es. Voir la sectionAuto install de notre site Web.\n"
-"\n"
-" * 珷Sauvegarder les paquetages s閘ectionn閟牷 (*) sauve la s閘ection des\n"
-"paquetages install閟. Puis, lorsque vous ferez une autre installation,\n"
-"ins閞ez la disquette dans le lecteur et acc閐ez au menu d'aide en tapant\n"
-"[f1], et entrez la commande suivante : 珷linux defcfg=\"floppy\"牷.\n"
-"\n"
-"(*) Vous avez besoin d'une disquette format閑 avec FAT (pour la cr閑r sous\n"
-"Linux, tapez 珷mformat a:牷)"
+"Pour obtenir la liste des param鑤res disponibles pour l'imprimante courante, "
+"cliquez sur le bouton 珷liste des options d'impression牷."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Activation des serveurs..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Impression des pages de test..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Le point de montage %s est d閖 utilis閈n"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
@@ -2422,51 +2271,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Cette 閠ape vous permet de d閠erminer pr閏is閙ent l'emplacement de votre\n"
"installation de Mandrake Linux. Si votre disque est vide ou utilis par un\n"
@@ -2483,344 +2330,175 @@ msgstr ""
"Selon la configuration de votre disque, plusieurs options sont disponibles\n"
":\n"
"\n"
-" * 珷Utilisez l'espace disponible牷 : cette option tentera simplement de\n"
-"partitionner automatiquement l'espace inutilis sur votre disque. Il n'y\n"
-"aura pas d'autre question.\n"
-"\n"
-" * 珷Utiliser les partitions existantes牷 : l' assistant a d閠ect une ou\n"
-"plusieurs partitions existants sur votre disque. Si vous voulez les\n"
-"utiliser, choisissez cette option. Il vous sera alors demand de choisir\n"
-"les points de montage associ閟 chacune des partitions. Les anciens points\n"
-"de montage sont s閘ectionn閟 par d閒aut, et vous devriez g閚閞alement les\n"
-"garder.\n"
-"\n"
-" * 珷Utilisez l'espace libre sur une partition Windows牷 : si Microsoft\n"
-"Windows est install sur votre disque et en prend toute la place vous devez\n"
-"faire de la place pour votre installation Linux. Pour ce faire, vous pouvez\n"
-"tout effacer (voir 珷effacer tout le disque牷) ou vous pouvez\n"
-"redimensionner la partition FAT Windows. Le redimensionnement peut 阾re\n"
-"effectu sans pertes de donn閑s, condition que vous ayez pr閍lablement\n"
-"d閒ragment la partition Windows, et qu'elle utilise le format FAT. Une\n"
-"sauvegarde de vos donn閑s ne fera pas de mal non plus. Cette solution est\n"
-"recommand閑 pour faire cohabiter Linux et Windows sur le m阭e ordinateur.\n"
+" * 珷%s牷 : cette option tentera simplement de partitionner automatiquement\n"
+"l'espace inutilis sur votre disque. Il n'y aura pas d'autre question.\n"
+"\n"
+" * 珷%s牷 : l' assistant a d閠ect une ou plusieurs partitions existants\n"
+"sur votre disque. Si vous voulez les utiliser, choisissez cette option. Il\n"
+"vous sera alors demand de choisir les points de montage associ閟 chacune\n"
+"des partitions. Les anciens points de montage sont s閘ectionn閟 par d閒aut,\n"
+"et vous devriez g閚閞alement les garder.\n"
+"\n"
+" * 珷%s牷 : si Microsoft Windows est install sur votre disque et en prend\n"
+"toute la place vous devez faire de la place pour votre installation Linux.\n"
+"Pour ce faire, vous pouvez tout effacer (voir 珷effacer tout le disque牷)\n"
+"ou vous pouvez redimensionner la partition FAT Windows. Le\n"
+"redimensionnement peut 阾re effectu sans pertes de donn閑s, condition\n"
+"que vous ayez pr閍lablement d閒ragment la partition Windows, et qu'elle\n"
+"utilise le format FAT. Une sauvegarde de vos donn閑s ne fera pas de mal non\n"
+"plus. Cette solution est recommand閑 pour faire cohabiter Linux et Windows\n"
+"sur le m阭e ordinateur.\n"
"\n"
" Avant de choisir cette option, il faut comprendre qu'apr鑣 cette\n"
"proc閐ure l'espace disponible pour Windows sera r閐uit. Vous aurez moins\n"
"d'espace pour installer des logiciels ou sauvegarder de l'information avec\n"
"Windows.\n"
"\n"
-" * 珷Effacer tout le disque牷: si vous voulez effacer toutes les donn閑s et\n"
-"les applications install閑s sur votre syst鑝e et les remplacer par votre\n"
-"nouveau syst鑝e Mandrake Linux, choisissez cette option. Soyez prudent, car\n"
-"ce choix est irr関ersible et permanent. Il vous sera impossible de\n"
-"retrouver vos donn閑s effac閑s.\n"
+" * 珷%s牷: si vous voulez effacer toutes les donn閑s et les applications\n"
+"install閑s sur votre syst鑝e et les remplacer par votre nouveau syst鑝e\n"
+"Mandrake Linux, choisissez cette option. Soyez prudent, car ce choix est\n"
+"irr関ersible et permanent. Il vous sera impossible de retrouver vos donn閑s\n"
+"effac閑s.\n"
"\n"
" !! En choisissant cette option, l'ensemble du contenu de votre disque\n"
"sera d閠ruit. !!\n"
"\n"
-" * 珷Supprimer Microsoft Windows牷: ce choix effacera tout simplement ce\n"
-"que contient le disque et recommencera z閞o. Toutes les donn閑s et les\n"
-"programmes pr閟ents sur le disque seront effac閟.\n"
+" * 珷%s牷: ce choix effacera tout simplement ce que contient le disque et\n"
+"recommencera z閞o. Toutes les donn閑s et les programmes pr閟ents sur le\n"
+"disque seront effac閟.\n"
"\n"
" !! En choisissant cette option, l'ensemble de votre disque sera effac閈n"
"!!\n"
"\n"
-" * 珷Partitionnement personnalis闋 : permet de partitionner manuellement\n"
-"votre disque. Soyez prudent, car bien que plus puissante, cette option est\n"
-"dangereuse. Vous pouvez facilement perdre l'ensemble du contenu d'un\n"
-"disque. Donc, ne choisissez pas cette option si vous ne savez pas\n"
-"exactement ce que vous devez faire. Pour en savoir plus sur DiskDrake,\n"
-"r閒閞ez vous 珷G閞er ses partitions牷 du 珷Guide de d閙arrage牷."
+" * 珷%s牷 : permet de partitionner manuellement votre disque. Soyez\n"
+"prudent, car bien que plus puissante, cette option est dangereuse. Vous\n"
+"pouvez facilement perdre l'ensemble du contenu d'un disque. Donc, ne\n"
+"choisissez pas cette option si vous ne savez pas exactement ce que vous\n"
+"devez faire. Pour en savoir plus sur DiskDrake, r閒閞ez vous 珷G閞er ses\n"
+"partitions牷 du 珷Guide de d閙arrage牷."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Options\n"
-"\n"
-" Vous pourrez finalement choisir ici de d閙arrer l'interface graphique au\n"
-"lancement de la machine. Il est pr閒閞able de choisir 珷Non牷 si vous 阾es\n"
-"en train d'installer un serveur, ou si vous n'avez pas r閡ssi configurer\n"
-"l'閏ran correctement."
+msgid "Ukraine"
+msgstr "Ukraine"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Dans le cas o diff閞ents serveurs seraient disponible pour votre carte,\n"
-"avec ou sans acc閘閞ation 3D, il vous est alors propos de choisir le\n"
-"serveur qui vous conviendra le mieux."
+msgid "Application:"
+msgstr "Application:"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"R閟olution\n"
-"\n"
-" Vous pouvez choisir ici la r閟olution et nombre de couleur parmi celles\n"
-"disponibles pour votre mat閞iel. Choisissez la configuration optimale pour\n"
-"votre utilisation (vous pourrez n閍nmoins modifier cela apr鑣\n"
-"l'installation). Un 閏hantillon de la configuration choisie appara顃 dans\n"
-"le moniteur stylis."
+msgid "External ISDN modem"
+msgstr "Modem RNIS/ISDN externe"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Moniteur\n"
-"\n"
-" Le programme d'installation d閠ecte et configure automatiquement les\n"
-"moniteurs connect閟 votre unit centrale. Si ce n'est pas le cas, vous\n"
-"pouvez choisir dans cette liste le moniteur que vous utilisez\n"
-"effectivement."
+msgid "if set to yes, report check result by mail."
+msgstr "Si oui, envoie un rapport de v閞ification par courriel"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Que choisissez-vous? (%s par d閒aut) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "R閟olution de probl鑝e"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / R間ion"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"X (pour le syst鑝e X Window) est le coeur de votre interface graphique sous\n"
-"GNU/Linux. Tous les environnements graphiques (KDE, GNOME, WindowMaker et.)\n"
-"pr閟ents sur Mandrake Linux d閜endent de X.\n"
-"\n"
-"Il vous sera pr閟ent la liste de divers param鑤res changer pour obtenir\n"
-"un affichage optimal : Carte graphique\n"
-"\n"
-" Le programme d'installation d閠ecte et configure automatiquement les\n"
-"cartes graphiques pr閟entes sur votre machine. Si ce n'est pas le cas, vous\n"
-"pouvez choisir dans cette liste la carte que vous utilisez effectivement.\n"
-"\n"
-" Dans le cas o diff閞ents serveurs seraient disponible pour votre carte,\n"
-"avec ou sans acc閘閞ation 3D, il vous est alors propos de choisir le\n"
-"serveur qui vous conviendra le mieux.\n"
-"\n"
-"\n"
-"\n"
-"Moniteur\n"
-"\n"
-" Le programme d'installation d閠ecte et configure automatiquement les\n"
-"moniteurs connect閟 votre unit centrale. Si ce n'est pas le cas, vous\n"
-"pouvez choisir dans cette liste le moniteur que vous utilisez\n"
-"effectivement.\n"
-"\n"
-"\n"
-"\n"
-"R閟olution\n"
-"\n"
-" Vous pouvez choisir ici la r閟olution et nombre de couleur parmi celles\n"
-"disponibles pour votre mat閞iel. Choisissez la configuration optimale pour\n"
-"votre utilisation (vous pourrez n閍nmoins modifier cela apr鑣\n"
-"l'installation). Un 閏hantillon de la configuration choisie appara顃 dans\n"
-"le moniteur stylis.\n"
-"\n"
-"\n"
+"Pour r閟oudre un probl鑝e de son,\n"
+"vous pouvez hurler les commandes suivantes dans une console:\n"
"\n"
-"Test\n"
+"- 珷lspcidrake -v | fgrep AUDIO牷 vous indique quel pilote votre carte\n"
+" utilise par d閒aut\n"
"\n"
-" le syst鑝e va ici essayer d'ouvrir un 閏ran graphique la r閟olution\n"
-"choisie. Si vous pouvez voir le message pendant le test, et r閜ondez\n"
-"珷Oui牷, alors DrakX passera l'閠ape suivante. Si vous ne pouvez pas voir\n"
-"de message, cela signifie que vos param鑤res sont incompatibles, et le test\n"
-"terminera automatiquement apr鑣 12 secondes. Changez la configuration\n"
-"jusqu' obtenir un affichage correct lors du test.\n"
+"- 珷grep sound-slot /etc/modules.conf牷 vous affiche quel pilote\n"
+"(module) est actuellement utilis.\n"
"\n"
+"- 珷/sbin/lsmod牷 vous permet de v閞ifier si ce module est charg閈n"
"\n"
+"- 珷/sbin/chkconfig --list sound牷 et 珷/sbin/chkconfig --list alsa牷\n"
+"vous diront si les services 珷sound牷 et 珷alsa牷 sont configur閟 pour\n"
+"阾re d閙arr閟 d鑣 le niveau d'ex閏ution 3 (init runlevel 3)\n"
"\n"
-"Options\n"
+"- 珷aumix -q牷 vous chuchotera peut-阾re que le volume est coup...\n"
"\n"
-" Vous pourrez finalement choisir ici de d閙arrer l'interface graphique au\n"
-"lancement de la machine. Il est pr閒閞able de choisir 珷Non牷 si vous 阾es\n"
-"en train d'installer un serveur, ou si vous n'avez pas r閡ssi configurer\n"
-"l'閏ran correctement."
+"- 珷/sbin/fuser -v /dev/dsp牷 d閚oncera quel programme est en train\n"
+"d'utiliser ou de bloquer la carte son.\n"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-"Carte graphique\n"
-"\n"
-" Le programme d'installation d閠ecte et configure automatiquement les\n"
-"cartes graphiques pr閟entes sur votre machine. Si ce n'est pas le cas, vous\n"
-"pouvez choisir dans cette liste la carte que vous utilisez effectivement.\n"
+"Les pages de test ont 閠 envoy閑s l'imprimante.\n"
+"Il peut se passer un certain temps avant le d閎ut effectif de l'impression.\n"
+"Statut de l'impression:\n"
+"%s\n"
"\n"
-" Dans le cas o diff閞ents serveurs seraient disponible pour votre carte,\n"
-"avec ou sans acc閘閞ation 3D, il vous est alors propos de choisir le\n"
-"serveur qui vous conviendra le mieux."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"GNU/Linux manipule l'heure au format GMT (Greenwich Mean Time) et la\n"
-"convertit en temps local selon le fuseau horaire choisi. Il est n閍nmoins\n"
-"possible de d閟activer cela en d閟閘ectionnant 珷Horloge syst鑝e r間l閑 sur\n"
-"le m閞idien de Greenwich牷 de fa鏾n ce que l'horloge mat閞ielle soit la\n"
-"m阭e que celle du syst鑝e. Cela est particuli鑢ement utile si la machine\n"
-"accueille un autre syst鑝e d'exploitation tel que Windows.\n"
-"\n"
-"La 珷Synchronisation automatique牷 permet de r間ler l'heure automatiquement\n"
-"en se connectant un serveur de temps sur Internet. Dans la liste qui est\n"
-"alors pr閟ent閑, choisissez un serveur g閛graphiquement proche de vous.\n"
-"Vous devez avoir une connexion Internet pour que cela fonctionne bien\n"
-"entendu. Cela installera en fait sur votre machine un serveur de temps\n"
-"local qui pourra, en option, 阾re lui-m阭e utilis par d'autres machines de\n"
-"votre r閟eau local."
+msgid "daily"
+msgstr "tous les jours"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Vous pouvez maintenant choisir les services disponibles au d閙arrage de\n"
-"votre syst鑝e.\n"
-"\n"
-"Ici sont pr閟ent閟 tous les services disponibles avec l'installation en\n"
-"place. Faites une bonne v閞ification et enlevez tout ce qui n'est pas\n"
-"absolument n閏essaire au d閙arrage du syst鑝e.\n"
-"\n"
-"Vous pouvez obtenir une courte explication des services en les\n"
-"s閘ectionnant sp閏ifiquement. Cela dit, si vous n'阾es pas s鹯 de\n"
-"l'application d'un service, conservez les param鑤res par d閒aut.\n"
-"\n"
-"!! cette 閠ape, soyez particuli鑢ement attentif dans le cas d'un syst鑝e\n"
-"destin agir comme serveur. Dans ce cas, vous voudrez probablement\n"
-"permettre exclusivement les services n閏essaires. !!"
+msgid "and one unknown printer"
+msgstr "et une imprimante inconnue"
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"珷Imprimante牷: en cliquant sur 珷Configurer牷, l'outil de configuration\n"
-"d'impression sera d閙arr. Consultez le chapitre correspondant du 珷Guide\n"
-"de d閙arrage牷 pour plus de renseignements. L'interface qui y est\n"
-"document閑 est similaire celle rencontr閑 lors de l'installation."
+msgid "Ireland"
+msgstr "Irlande"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "version du noyau"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
+msgstr " Restauration de la configuration "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "La configuration est-elle correcte?"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
@@ -2828,11 +2506,11 @@ msgstr ""
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2847,11 +2525,10 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
"Si vous d閟irez connecter votre syst鑝e un r閟eau ou Internet, cliquez\n"
-"sur 珷OK牷. L'auto-d閠ection des p閞iph閞iques r閟eau et modem sera alors\n"
-"lanc閑. Si cette d閠ection 閏houe, d閏ochez la case 珷Utiliser\n"
-"l'auto-d閠ection牷. Vous pouvez aussi choisir de ne pas configurer le\n"
-"r閟eau, ou de le faire plus tard. Dans ce cas, cliquez simplement sur\n"
-"珷Annuler牷.\n"
+"sur 珷%s牷. L'auto-d閠ection des p閞iph閞iques r閟eau et modem sera alors\n"
+"lanc閑. Si cette d閠ection 閏houe, d閏ochez la case 珷%s牷. Vous pouvez\n"
+"aussi choisir de ne pas configurer le r閟eau, ou de le faire plus tard.\n"
+"Dans ce cas, cliquez simplement sur 珷%s牷.\n"
"\n"
"Les types de connexion support閑s sont : modem t閘閜honique, modem ISDN,\n"
"connexion ADSL, modem c鈈le ou simplement LAN (r閟eau Ethernet).\n"
@@ -2865,4706 +2542,4434 @@ msgstr ""
"sp閏ifiques de chaque type de connexion. Vous pouvez 間alement configurer\n"
"votre connexion Internet une fois l'installation termin閑."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Finalement, si vous avez choisi de s閘ectionner individuellement les\n"
-"paquetages installer, DrakX vous pr閟entera un arbre contenant tous les\n"
-"paquetages, class閟 par groupes et sous-groupes. En naviguant travers\n"
-"l'arbre, vous pouvez s閘ectionner des groupes, des sous-groupes ou des\n"
-"paquetages individuels.\n"
-"\n"
-"D鑣 que vous s閘ectionnez un paquetage dans l'arbre, une description\n"
-"appara顃 droite. Une fois votre s閘ection termin閑, cliquez sur\n"
-"珷Installation牷 pour lancer le processus. Soyez patient, car en fonction\n"
-"du type d'installation choisi ou du nombre de paquetages s閘ectionn閟, le\n"
-"temps requis peut 阾re substantiellement diff閞ent. Une estimation du temps\n"
-"requis est pr閟ent閑 sur l'閏ran en cours d'op閞ation afin de vous\n"
-"permettre d'関aluer de combien de temps vous disposez pour prendre votre\n"
-"d閖euner.\n"
-"\n"
-"!! Si un logiciel serveur a 閠 s閘ectionn, vous devrez confirmer que vous\n"
-"voulez vraiment que celui-ci soit install. Sous Mandrake, par d閒aut, tous\n"
-"les serveurs install閟 sont lanc閟 au d閙arrage. Malgr tous les efforts\n"
-"investis pour vous livrer une distribution Linux s閏uritaire, il est\n"
-"possible que certaines failles de s閏urit affectes les serveurs install閟\n"
-"au-del de la date de publication. Si vous ne savez pas pr閏is閙ent quoi\n"
-"sert un serveur en particulier ou pourquoi il est install, cliquez sur\n"
-"珷NON牷. En cliquant sur 珷OUI牷, le serveur sera install et le service\n"
-"rendu disponible au d閙arrage. !!\n"
-"\n"
-"L'option 珷D閜endances automatiques牷 d閟active les avertissements qui\n"
-"apparaissent chaque fois que l'installeur s閘ectionne un nouveau paquet.\n"
-"Ces avertissements surviennent parce que DrakX a d閠ermin que pour qu'un\n"
-"paquetage soit fonctionnel, il lui en faut un autre dont il est d閜endant.\n"
-"\n"
-"La petite ic鬾e de disquette qui appara顃 au bas de la liste permet de\n"
-"r閏up閞er une liste de paquetages s閘ectionn閟 durant une autre\n"
-"installation. En cliquant dessus, on vous demandera d'ins閞er la disquette\n"
-"cr殚e lors d'une installation pr閏閐ente. Voir la deuxi鑝e note de la\n"
-"derni鑢e 閠ape afin de savoir comment cr閑r une telle disquette."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"C'est maintenant le moment de choisir les paquetages qui seront install閟\n"
-"sur votre syst鑝e. Sachez que Mandrake Linux contient plusieurs milliers de\n"
-"paquetages installer, et qu'il n'est pas n閏essaire de tous les conna顃re\n"
-"par coeur.\n"
-"\n"
-"Les paquetages sont regroup閟 selon la nature de l'installation. Les\n"
-"groupes sont divis閟 en quatre sections principales :\n"
-"\n"
-" * 珷Station de travail牷: si vous comptez utiliser votre machine ainsi,\n"
-"s閘ectionner un ou plusieurs groupes y correspondant.\n"
-"\n"
-" * 珷D関eloppement牷: si votre syst鑝e doit 阾re utilis pour la\n"
-"programmation, choisissez les groupes d閟ir閟.\n"
-"\n"
-" * 珷Serveur牷: finalement, si votre syst鑝e doit agir en tant que serveur,\n"
-"vous pourrez s閘ectionner les services que vous voulez installer.\n"
-"\n"
-" * 珷Environnement graphique牷: ce groupe vous permettra de d閠erminer quel\n"
-"environnement graphique vous voulez avoir sur votre syst鑝e. 蓈idemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-"En pla鏰nt votre souris au dessus d'un nom de groupe, vous verrez\n"
-"appara顃re une courte description de ce groupe. Si vous d-s閘ectionnez\n"
-"tous les groupes lors d'une installation standard (par opposition une\n"
-"mise jour), un dialogue appara顃ra proposant diff閞entes options pour une\n"
-"installation minimale :\n"
-"\n"
-" * 珷Avec X牷 : installe le moins de paquetages possible pour avoir un\n"
-"environnement de travail graphique ;\n"
-"\n"
-" * 珷Avec la documentation de base牷 : installe le syst鑝e de base plus\n"
-"certains utilitaires de base et leur documentation. Cette installation est\n"
-"utilisable comme base pour monter un serveur ;\n"
-"\n"
-" * 珷Installation vraiment minimale牷 : installera le strict minimum\n"
-"n閏essaire pour obtenir un syst鑝e GNU/Linux fonctionnel, en ligne de\n"
-"commande. Cette installation prends peu pr鑣 65Mo.\n"
-"\n"
-"Vous pouvez finalement cocher l'option 珷S閘ection individuelle des\n"
-"paquetages牷. Cette option est utiliser si vous connaissez exactement le\n"
-"paquetage d閟ir ou si vous voulez avoir le contr鬺e total de votre\n"
-"installation.\n"
-"\n"
-"Si vous avez d閙arr l'installation en mode 珷mise jour牷, vous pouvez\n"
-"珷d-s閘ectionner牷 tous les groupes afin d'関iter l'installation de\n"
-"nouveaux programmes. Cette option est tr鑣 utile pour restaurer un syst鑝e\n"
-"d閒ectueux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"Les paquetages requis l'installation de Mandrake Linux sont distribu閟\n"
-"sur plusieurs CDROM. Heureusement, DrakX conna顃 l'emplacement de chacun\n"
-"des paquetages. Il 閖ectera celui pr閟ent dans le lecteur et vous demandera\n"
-"d'ins閞er le CDROM appropri, selon le cas."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"La liste pr閟ent閑 plus haut identifie les partitions GNU/Linux d閠ect閑s\n"
-"sur votre syst鑝e. Vous pouvez accepter les choix propos閟 par l'assistant,\n"
-"qui s'av鑢ent bon dans la grande majorit des cas. Si vous faites un\n"
-"changement, vous devez au moins avoir une partition root (\"/\"). root\n"
-"partition (珷/牷). Prenez garde de vous r閟erver suffisamment d'espace pour\n"
-"installer toutes les applications qui vous int閞essent. Vous devrez\n"
-"間alement cr閑r une partition 珷 /home牷. Ceci s'av鑢e exclusivement\n"
-"possible lorsque vous avez d閖 au moins une partition GNU/Linux de\n"
-"configur閑.\n"
-"\n"
-"Chaque partition est list閑 comme suit: \"Nom\", \"Capacit閈".\n"
-"\n"
-"Le \"Nom\" est structur ainsi : \"type de disque dur\", \"num閞o du disque\n"
-"dur\", \"num閞o de partition\". Par exemple, 珷hda1牷.\n"
-"\n"
-"Le \"Type de disque dur\" correspond hd si votre disque est IDE. Pour un\n"
-"disque SCSI, vous lirez \"sd\".\n"
-"\n"
-"Le num閞o du disque est toujours list apr鑣 le \"hd\" ou \"fd\". Pour les\n"
-"disques IDE :\n"
-"\n"
-" * \"a\" signifie \"disque primaire ma顃re sur le premier contr鬺eur IDE\";\n"
-"\n"
-" * \"b\" signifie le \"disque primaire esclave sur le premier contr鬺eur\n"
-"IDE\";\n"
-"\n"
-" * \"c\" indique le \"disque primaire ma顃re sur le second contr鬺eur\n"
-"IDE\";\n"
-"\n"
-" * \"d\" signifie le \"disque primaire esclave sur le second contr鬺eur\n"
-"IDE\";\n"
-"\n"
-"Avec les disques SCSI, le \"a\" indique le plus petit SCSI ID, et 珷b牷 le\n"
-"珷deuxi鑝e plus petit ID牷, etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-"GNU/Linux est un syst鑝e multiutilisateurs, ce qui signifie g閚閞alement\n"
-"que chaque utilisateur peut avoir des pr閒閞ences diff閞entes, ses propres\n"
-"fichiers, etc. Pour plus d'informations, consultez le 珷Guide de\n"
-"d閙arrage牷. Contrairement 珷root牷 qui a tous les droits, les\n"
-"utilisateurs que vous ajouterez ici n'auront que des permissions pour agir\n"
-"sur leurs propres fichiers exclusivement. L'utilisateur/ administrateur\n"
-"devrait 間alement se cr閑r un compte 珷normal牷. C'est travers cet\n"
-"utilisateur que celui-ci devrait se connecter pour accomplir ses t鈉hes\n"
-"quotidiennes. Car, bien qu'il soit pratique d'avoir tous les acc鑣, cette\n"
-"situation peut 間alement engendrer des situations d閟astreuses si un\n"
-"fichier est d閠ruit par inadvertance. Un utilisateur normal n'ayant pas\n"
-"acc鑣 aux fichiers sensibles, ne peut causer de dommages majeurs.\n"
-"\n"
-"Il faut d'abord entrer le vrai nom de la personne. 蓈idemment, vous pouvez\n"
-"y inscrire n'importe quoi. DrakX prendra le premier mot ins閞 et le\n"
-"transposera comme 珷Nom de login牷. C'est le nom qui sera utilis pour se\n"
-"connecter au syst鑝e. Vous pouvez le modifier. Il faut maintenant entrer un\n"
-"mot de passe. Celui-ci n'est pas aussi crucial que le mot de passe de\n"
-"珷root牷, mais ce n'est pas une raison pour rentrer 123456. Apr鑣 tout,\n"
-"ceci mettrait vos fichiers en p閞il.\n"
-"\n"
-"Apr鑣 avoir cliqu sur 珷Accepter l'utilisateur牷, il vous sera possible\n"
-"d'ajouter d'autres utilisateurs. Cr閑z un utilisateur diff閞ent pour chaque\n"
-"personne devant utiliser votre ordinateur. Une fois chaque utilisateur\n"
-"d閒ini, cliquez sur 珷Suivant ->牷.\n"
-"\n"
-"En cliquant sur 珷Avanc闋, vous pourrez s閘ectionner un 珷shell牷\n"
-"diff閞ent pour cet utilisateur (bash est assign par d閒aut).\n"
-"\n"
-"Lorsque vous avez fini d'installer tous les utilisateurs, il vous est\n"
-"propos de choisir un utilisateur qui sera automatiquement connect lors du\n"
-"d閙arrage de l'ordinateur. Si cela vous int閞esse (et que la s閏urit閈n"
-"locale n'est pas trop un probl鑝e), choisissez l'utilisateur et le\n"
-"gestionnaire de fen阾res, puis cliquez sur 珷Suivant ->牷. Si cela ne vous\n"
-"int閞esse pas, d閏ochez la case 珷Voulez-vous utiliser cette\n"
-"fonctionnalit?牷."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Avant d'aller plus loin, il est fortement recommand de lire attentivement\n"
-"les termes et conditions d'utilisations de la licence. Celle-ci r間it\n"
-"l'ensemble de la distribution Mandrake Linux. Si vous en acceptez tous les\n"
-"termes, cochez la case 珷Accepter牷, sinon, 閠eignez simplement votre\n"
-"ordinateur."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Vous devez aussi formater %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Impossible d'acc閐er aux modules correspondant votre noyau (le fichier %s "
-"est manquant), cela veut g閚閞alement dire que votre disquette d'amor鏰ge "
-"n'est plus jour par rapport votre p閞iph閞ique d'installation (veuillez "
-"cr閑r une disquette d'amor鏰ge plus r閏ente)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Une erreur est survenue: aucun p閞iph閞ique valide n'a 閠 trouv pour\n"
-"cr閑r de nouvelles partitions. Veuillez v閞ifier votre mat閞iel."
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erreur lors de la lecture du fichier %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pour utiliser cette sauvegarde de s閘ection des paquetages, veuillez "
-"red閙arrer l'installation avec la commande 珷linux defcfg=floppy牷."
+msgid "Wizard Configuration"
+msgstr "Configuration par assistant"
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Cette disquette n'est pas au format DOS/Windows"
+msgid "Autoprobe"
+msgstr "D閠ection automatique"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ins閞ez une disquette format閑 en FAT (format DOS/Windows) %s"
+msgid "Backup system files..."
+msgstr "Sauvegarde des fichiers syst鑝es..."
#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "On ne peut pas utiliser l'option broadcast sans domaine NIS"
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Les paquetages suivants seront d閟install閟 pour permettre la mise jour: %"
-"s \n"
-"\n"
-"\n"
-"Souhaitez-vous r閑llement les d閟installer?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No"
-msgstr "Non"
+msgid "Removing printer \"%s\"..."
+msgstr "Suppression de l'imprimante 珷%s牷..."
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes"
-msgstr "Oui"
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"Do you really want to install these servers?\n"
msgstr ""
-"Vous avez s閘ectionn le(s) serveur(s) suivant(s): %s\n"
-"\n"
-"\n"
-"Ces serveurs seront activ閟 par d閒aut.\n"
-"Ils n'ont actuellement aucun probl鑝e de s閏urit connu,\n"
-"mais si des vuln閞abilit閟 sont d閏ouvertes par la suite,\n"
-"vous devrez effectuer une mise jour le plus rapidement possible.\n"
+"Veuillez indiquer l'emplacement du fichier auto_install.cfg.\n"
"\n"
+"Laissez le champ vide si vous ne voulez pas configurer de mode "
+"d'installation automatique.\n"
"\n"
-"Confirmez vous l'installation de ces serveurs?\n"
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "Configuration du syst鑝e"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "Installation du syst鑝e"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Arr阾 de l'interface r閟eau..."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Niveau d'information qui peut 阾re obtenu par l'instruction cpuid"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "D閙arrage de l'interface r閟eau..."
+msgid "Peru"
+msgstr "P閞ou"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Le partitionnement a 閏hou闋: %s"
+msgid " on device: %s"
+msgstr "sur le p閞iph閞ique: %s"
#: ../../install_interactive.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "L'assistant de partitionnement a trouv les solutions suivantes:"
+msgid "Remove Windows(TM)"
+msgstr "Supprimer Microsoft Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Pas de place disponible pour l'installation"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
+"D閙arre le serveur de polices de caract鑢es, obligatoire pour le "
+"fonctionnement de l'interface graphique (XFree)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Vous pouvez maintenant partitionner %s.\n"
-"\n"
-"Lorsque vous aurez termin, n'oubliez pas d'enregistrer vos\n"
-"modifications en appuyant sur la touche 珷w牷."
+"La plupart de ces valeurs ont 閠 extraites\n"
+"de votre syst鑝e. Vous pouvez les modifier\n"
+"comme vous le souhaitez."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Use fdisk"
-msgstr "Utiliser fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "S閘ectionnez les polices ou dossiers et cliquez sur 珷Ajouter牷"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Partitionnement personnalis"
+msgid "Madagascar"
+msgstr "Madagascar"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOUTES les partitions et les donn閑s pr閟entes sur le disque %s seront "
-"perdues"
+msgid "Urpmi"
+msgstr "Urpmi"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Vous poss閐ez plus d'un disque dur.\n"
-"Sur lequel d閟irez vous installer Linux?"
+msgid "Cron not available yet as non-root"
+msgstr "Cron n'est pas encore disponible en dehors de root."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Effacer tout le disque"
+msgid "System"
+msgstr "Syst鑝e"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Supprimer Microsoft Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Voulez-vous utiliser cette fonctionnalit闋?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Il n'y a aucune partition FAT redimensionner (ou trop peu d'espace est "
-"disponible)"
+msgid "Arabic"
+msgstr "Arabe"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
msgstr ""
-"Afin d'assurer l'int間rit des donn閑s apr鑣 le redimensionnement de(s) "
-"partition(s),\n"
-"une v閞ification du syst鑝e de fichier sera r閍lis au prochain d閙arrage de "
-"Windows(TM)"
+"\n"
+"- Options:\n"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Le redimensionnement de la partition FAT a 閏hou闋: %s"
+msgid "Password required"
+msgstr "Mot de passe n閏essaire"
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Resizing Windows partition"
-msgstr "Calcul des limites du syst鑝e de fichiers de Windows en cours"
+msgid "%d minutes"
+msgstr "%d minutes"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Resizing"
-msgstr "Redimensionnement"
+msgid "Graphics card: %s"
+msgstr "Carte graphique: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "partition %s"
-msgstr "partition %s"
+msgid "WebDAV transfer failed!"
+msgstr "蒫hec du transfert WebDAV!"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Quelle taille d閟irez-vous allouer Windows sur la"
+msgid "XFree configuration"
+msgstr "Configuration d'XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Choose action"
+msgstr "Choisissez une action"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr "Polyn閟ie Fran鏰ise"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"WARNING!\n"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-"ATTENTION!\n"
+"DrakX d閠ecte g閚閞alement le nombre de boutons de votre souris. Sinon, il\n"
+"prend pour acquis que vous avez une souris deux boutons et configurera\n"
+"l'閙ulation du troisi鑝e bouton. De plus, DrakX saura automatiquement si\n"
+"vous avez une souris PS/2, s閞ie ou USB.\n"
"\n"
-"La taille de votre partition Windows va maintenant 阾re r閐uite.\n"
+"Si vous d閟irez installer une souris diff閞ente, veuillez la s閘ectionner 郳n"
+"partir de la liste qui vous est propos閑.\n"
"\n"
-"Soyez prudent: cette op閞ation est dangereuse. Si ce n'est pas d閖郳n"
-"fait, vous devriez tout d'abord sauvegarder vos donn閑s et lancer les\n"
-"programmes 珷scandisk牷 et 珷defrag牷 (fournis avec Windows)\n"
-"sur cette partition.\n"
+"Si vous s閘ectionnez une souris diff閞ente de celle choisie par d閒aut,\n"
+"DrakX vous pr閟entera un 閏ran de test. Utilisez les boutons et la molette\n"
+"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
+"fonctionne pas normalement, appuyez sur la barre d'espacement ou la touche\n"
+"[Entr閑] pour annuler le test et retourner la liste de choix de la\n"
+"souris.\n"
"\n"
-"Si vous 阾es s鹯 de vous, cliquez sur OK."
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Votre partition FAT est trop fragment閑. Red閙arrez sous Windows\n"
-"et lancez le programme de d閒ragmentation 珷defrag牷,\n"
-"puis relancez l'installation de Mandrake Linux."
+"Les souris roulette ne sont pas d閠ect閑s parfois. Vous devrez alors\n"
+"s閘ectionner manuellement une souris dans la liste. Assurez vous de choisir\n"
+"celle qui correspond votre mod鑜e et au bon port de connexion. Apr鑣\n"
+"avoir press le bouton 珷%s牷, une image de souris appara顃. Vous devez\n"
+"alors faire tourner la molette afin de l'activer correctement. Testez alors\n"
+"que tous les mouvements et boutons fonctionnent correctement."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Calcul de l'espace libre sur la partition Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Support des imprimantes winprinter OKI 4w et compatibles."
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
-"Le programme de redimensionnement des partitions FAT ne peut g閞er votre\n"
-"partition. L'erreur suivante est survenue: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Quelle partition d閟irez-vous redimensionner?"
+"D閙arrage ou arr阾 du syst鑝e sonore ALSA (Advanced Linux Sound "
+"Architecture) Il charge le pilote pour votre carte son, et restaure les "
+"r間lages du p閞iph閞ique de mixage."
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Utiliser l'espace libre sur la partition Windows"
+msgid "Installing driver for %s card %s"
+msgstr "Installation du pilote pour la carte %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-"Il n'y a aucune partition FAT utiliser pour le bouclage (ou trop peu "
-"d'espace est disponible)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Taille de la partition d'閏hange (swap) en Mo: "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Taille de la partition racine en Mo: "
+"Vous avez transf閞 votre pr閏閐ente imprimante par d閒aut (珷%s牷). Doit-"
+"elle 阾re 間alement l'imprimante par d閒aut de votre nouveau syst鑝e "
+"d'impression %s?"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Choix des tailles"
+msgid "Enable Server"
+msgstr "Activer le serveur"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quelle partition d閟irez-vous utiliser pour Linux4Win?"
+msgid "Ukrainian"
+msgstr "Ukrainien"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Utiliser la partition Windows pour le bouclage"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"L'acc鑣 r閟eau n'a pas pu 阾re d閙arr. Veuillez v閞ifier la configuration "
+"de votre mat閞iel et de votre acc鑣 r閟eau gr鈉e au 珷Centre de Contr鬺e "
+"Mandrake牷 puis essayez nouveau de configurer l'imprimante distante."
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Pas de partition existante utiliser"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Ins閞ez la disquette d'amor鏰ge utilis閑 dans le lecteur %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Utiliser une partition existante"
+msgid "Local network(s)"
+msgstr "R閟eaux locaux"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Pas assez d'espace libre pour cr閑r de nouvelles partitions"
+msgid "Remove Windows"
+msgstr "Supprimer Windows"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use free space"
-msgstr "Utiliser l'espace libre"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"Votre %s a 閠 configur.\n"
+"Vous pouvez maintenant scanner des documents en utilisant 珷XSane牷 partir "
+"du menu g閚閞al Multim閐ia->Graphisme."
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vous devez disposer d'une partition FAT mont閑 en /boot/efi"
+msgid "Firewire controllers"
+msgstr "Contr鬺eurs Firewire"
-#: ../../install_interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"Vous n'avez pas de partition d'閏hange (swap).\n"
+"Apr鑣 avoir configur les param鑤res g閚閞aux de LILO ou grub la liste des\n"
+"options de d閙arrage sera rendue disponible au d閙arrage.\n"
"\n"
-"D閟irez-vous tout de m阭e continuer?"
+"Si d'autres syst鑝es d'exploitation sont d閠ect閟, il seront\n"
+"automatiquement ajout閟 au menu d閙arrage. Vous pouvez ici affiner votre\n"
+"configuration. Cliquez sur 珷%s牷 pour cr閑r une nouvelle entr閑;\n"
+"Choisissez une entr閑, cliquez 珷%s牷 pour l'閐iter, ou 珷%s牷 pour\n"
+"l'enlever. 珷%s牷 validera vos changements.\n"
+"\n"
+"Il est possible que vous vouliez limiter l'acc鑣 ce syst鑝e\n"
+"d'exploitation. Il vous suffit de retirer l'entr閑 dans les options de\n"
+"d閙arrage et d閙arrer ce syst鑝e avec une disquette."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vous devez avoir une partition racine.\n"
-"Pour la d閒inir, cr閑z une partition (ou choisissez-en une d閖郳n"
-"existante) puis cliquez sur 珷Point de montage牷 et choisissez 珷/牷."
+msgid "System mode"
+msgstr "Choix pour l'interface utilisateur"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"Certains p閞iph閞iques pr閟ents sur votre syst鑝e n閏essitent des\n"
-"pilotes 珷propri閠aires牷 pour pouvoir fonctionner. Vous pouvez\n"
-"trouver plus d'informations les concernant ici: %s"
+"Pour pouvoir utiliser une imprimante connect閑 un serveur Netware, vous "
+"devez au moins indiquer le nom Netware du serveur (qui peut 阾re diff閞ent "
+"du nom d'h魌e TCP/IP) et le nom de la file d'impression laquelle vous "
+"voulez acc閐er ainsi qu'un nom d'utilisateur et un mot de passe si "
+"n閏essaire."
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"F閘icitations, l'installation est termin閑.\n"
-"Enlevez la disquette ou le CD-Rom d'amor鏰ge et appuyez sur 珷Entr閑牷.\n"
-"\n"
-"\n"
-"Pour toutes informations sur les corrections disponibles pour cette version "
-"de Mandrake Linux, consultez les Errata disponibles depuis:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Des informations sur la configuration de votre syst鑝e sont \n"
-"disponibles dans le Guide de l'Utilisateur de Mandrake Linux."
+msgid "Netmask:"
+msgstr "Masque de r閟eau:"
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "options pass閑s au noyau"
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
+"Rafra頲hir la liste des imprimantes (pour afficher toutes les imprimantes "
+"CUPS distantes)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
+"Quand cette option est activ閑, chaque d閙arrage de CUPS v閞ifiera que:\n"
"\n"
-"Important\n"
+"- si LPD/LPRng est install, /etc/printcap ne sera pas 閏ras par CUPS\n"
"\n"
-"Veuillez lire attentivement le pr閟ent document. En cas de d閟accord \n"
-"avec l'un de ses termes vous n'阾es pas autoris installer les CD-Rom\n"
-"suivants. Dans ce cas, cliquez sur 珷Refuser牷 pour continuer \n"
-"l'installation sans ces m閐ias.\n"
+"- si /etc/cups/cupsd.conf est absent, il sera cr殚\n"
"\n"
-"Certains composants logiciels contenus dans les prochains CD-Rom \n"
-"ne sont pas soumis aux licences GPL ou similaires permettant la copie, \n"
-"la modification ou la redistribution. Chacun de ces composants logiciels \n"
-"est distribu sous les termes et conditions d'un accord de licence qui \n"
-"lui est propre. Veuillez vous y r閒閞er et vous y soumettre avant de les \n"
-"installer ou de les redistribuer. G閚閞alement, ces licences n'autorisent\n"
-"pas la copie (autre qu' titre de sauvegarde), la redistribution, \n"
-"la d閏ompilation, la d閟assemblage, l'ing閚ierie inverse ni la modification "
-"des\n"
-"Logiciels auxquels elles s'appliquent. Toute violation d'un des termes de la "
-"licence applicable entra頽e g閚閞alement sa\n"
-"r閟iliation, sans pr閖udice de tous autres droits ou actions votre "
-"encontre.\n"
-" moins que l'accord de licence ne vous l'y autorise, vous ne pouvez pas \n"
-"installer ces Logiciels sur plus d'une machine ni adapter les Logiciels \n"
-"pour une utilisation en r閟eau. Le cas 閏h閍nt, veuillez contacter le \n"
-"distributeur du programme pour acqu閞ir des licences additionnelles.\n"
-"La distribution des tiers de copies des Logiciels ou de la documentation\n"
-"qui les accompagne est g閚閞alement interdite.\n"
+"- quand l'information d'imprimante est diffus閑, elle ne contient past "
+"\"localhost\" comme nom de serveur.\n"
"\n"
-"Tous les droits, titres et int閞阾 de ces Logiciels sont la propri閠 \n"
-"exclusive de leurs auteurs respectifs et sont prot間閟 au titre des \n"
-"droits de propri閠 intellectuelle et de copyright applicables aux "
-"logiciels.\n"
+"Si cette option vous conduit des probl鑝es, d閟activez-la, mais faites "
+"alors attention aux points ci-dessus."
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-"Introduction\n"
-"\n"
-"Le syst鑝e d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-apr鑣 d閚omm閟 les 珷Logiciels牷.\n"
-"Les Logiciels comprennent notamment, mais de fa鏾n non limitative,\n"
-"l'ensemble des programmes, proc閐閟, r鑗les et documentations \n"
-"relatifs au syst鑝e d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le pr閟ent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"mani鑢e que ce soit indique que vous reconnaissez avoir pr閍lablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du pr閟ent contrat de licence. En cas de d閟accord avec le pr閟ent "
-"document \n"
-"vous n'阾es pas autoris installer, reproduire et utiliser de quelque \n"
-"mani鑢e que ce soit ce produit.\n"
-"Le contrat de licence sera r閟ili automatiquement et sans pr閍vis dans le \n"
-"cas o vous ne vous conformeriez pas aux dispositions du pr閟ent document. \n"
-"En cas de r閟iliation vous devrez imm閐iatement d閠ruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le syst鑝e d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'閠at \n"
-"et sans aucune garantie. MandrakeSoft S.A. d閏line toute responsabilit \n"
-"d閏oulant d'un dommage direct, sp閏ial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de fa鏾n non limitative, tout dommage entra頽 par les pertes de \n"
-"b閚閒ices, interruptions d'activit, pertes d'informations commerciales ou \n"
-"autres pertes p閏uniaires, ainsi que des 関entuelles condamnations et \n"
-"indemnit閟 devant 阾re vers閑s par suite d'une d閏ision de justice, et ce \n"
-"m阭e si MandrakeSoft S.A. a 閠 inform閑 de la survenue ou de \n"
-"l'関entualit de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT LA D蒚ENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIB蒘 DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront 阾re \n"
-"tenus responsable raison d'un pr閖udice sp閏ial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de fa鏾n non \n"
-"limitative les pertes de b閚閒ices, interruptions d'activit, pertes \n"
-"d'informations commerciales ou autres pertes p閏uniaires, ainsi que \n"
-"des 関entuelles condamnations et indemnit閟 devant 阾re vers閑s par suite \n"
-"d'une d閏ision de justice) qui ferait suite l'utilisation, la d閠ention \n"
-"ou au simple t閘閏hargement depuis l'un des sites de t閘閏hargement de \n"
-"Mandrake Linux de logiciels prohib閟 par la l間islation laquelle vous \n"
-"阾es soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitu閟 de modules logiciels cr殚s par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribu閟 sous \n"
-"les termes de la Licence Publique G閚閞ale GNU (ci-apr鑣 d閚omm閑 珷GPL牷)\n"
-"ou d'autres licences similaires. La plupart de ces licences vous "
-"permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"r間issent. Veuillez lire et agr閑r les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence d'un Logiciel est soumettre l'auteur (ou ses\n"
-"repr閟entants) du Logiciel et non MandrakeSoft. \n"
-"Les programmes con鐄s par MandrakeSoft sont r間is par la licence GPL. \n"
-"La documentation r閐ig閑 par MandrakeSoft fait l'objet d'une licence \n"
-"sp閏ifique. Veuillez vous r閒閞ez la documentation pour obtenir plus \n"
-"de pr閏isions.\n"
-"\n"
-"\n"
-"4. Propri閠 intellectuelle\n"
-"\n"
-"Tous les droits, titres et int閞阾s des diff閞ents Logiciels sont la \n"
-"propri閠 exclusive de leurs auteurs respectifs et sont prot間閟 au titre \n"
-"des droits de propri閠 intellectuelle et de copyright applicables aux "
-"Logiciels.\n"
-"Les marques 珷Mandrake牷 et 珷Mandrake Linux牷 ainsi que les \n"
-"logotypes associ閟 sont d閜os閟 par MandrakeSoft S.A. \n"
+"OSS (Open Sound System) fut la premi鑢e API sonore. Elle est multi plate-"
+"formes (disponible sur la majorit des syst鑝es unix) mais est limit閑 et "
+"tr鑣 basique.\n"
+"De ce fait, tous les pilotes OSS doivent r閕nventer la roue.\n"
"\n"
+"ALSA (Advanced Linux Sound Architecture) est une architecture modulaire qui\n"
+"supporte un nombre impressionnant de cartes ISA, PCI et USB.\n"
"\n"
-"5. Dispositions diverses\n"
+"Elle fournit 間alement une API de plus haut niveau qu'OSS.\n"
"\n"
-"Si une disposition de ce contrat de licence devait 阾re d閏lar閑 nulle, \n"
-"ill間ale ou inapplicable par un tribunal comp閠ent, cette disposition sera \n"
-"exclue du pr閟ent contrat. Vous continuerez 阾re li閟 aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis la Loi fran鏰ise. Toute contestation relative aux pr閟entes \n"
-"dispositions sera r間l閑 pr閍lablement par voie amiable. A d閒aut d'accord\n"
-"avec MandrakeSoft S.A., les tribunaux comp閠ents de Paris seront saisis du \n"
-"litige. Pour toute question relative au pr閟ent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "D閙arrage de l'閠ape 珷%s牷\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Aide"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "non configur"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Configurer"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Souhaitez-vous tout de m阭e continuer?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Erreur lors de l'installation des paquetages:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Erreur lors du tri des paquetages:"
+"Pour utiliser ALSA, il est possible d'utiliser:\n"
+"- la compatibilit avec l'ancienne API OSS\n"
+"- la nouvelle API ALSA qui fournit un grand nombre de possibilit閟 avanc閑s "
+"mais n閏essite la biblioth鑡ue ALSA.\n"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
msgstr ""
-"--Changement de CD-Rom--\n"
-"\n"
-"Veuillez ins閞er le CD-Rom nomm 珷%s牷,\n"
-"puis cliquez sur 珷OK牷.\n"
+"L'auto-installation peut 阾re compl鑤ement automatique si n閏essaire,\n"
+"dans ce cas elle prend le contr鬺e du disque dur!!\n"
+"(pr関u pour l'installation d'une autre machine).\n"
"\n"
-"Si vous ne le poss閐ez pas, cliquez sur 珷Annuler牷 afin de ne rien "
-"installer partir de ce Cd-Rom."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Refuser"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation du paquetage %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetages"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Pas de d閠ails"
+"Vous pouvez pr閒閞er rejouer l'installation.\n"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Details"
-msgstr "D閠ails"
+msgid "Network printer \"%s\", port %s"
+msgstr "Imprimante r閟eau autonome 珷%s牷, port %s"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Veuillez patienter, pr閜aration de l'installation..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Veuillez choisir quelle carte r閟eau sera connect閑 votre r閟eau local"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Time remaining "
-msgstr "Temps restant "
+msgid "OK to restore the other files."
+msgstr "OK pour restaurer les autres fichiers."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Estimation en cours"
+msgid "Please choose your keyboard layout."
+msgstr "Veuillez choisir votre type de clavier."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing"
-msgstr "Installation"
+msgid "Printer Device URI"
+msgstr "Adresse r閟eau du p閞iph閞ique d'impression"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Choisissez les paquetages que vous voulez installer"
+msgid "Not erasable media!"
+msgstr "Ce n'est pas un support effa鏰ble!"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Minimal install"
-msgstr "Installation minimale"
+msgid "Terminal-based"
+msgstr "Manuelle par terminal"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "Mise jour de la s閘ection des paquetages"
+msgid "Installing a printing system in the %s security level"
+msgstr "Installation du syst鑝e d'impression sous le niveau de s閏urit 珷%s牷"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "Charger/Sauver sur disquette"
+msgid "The user name is too long"
+msgstr "Ce nom d'utilisateur est trop long"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Pr閏閐ent"
+msgid "Other OS (windows...)"
+msgstr "Autres syst鑝es (Windows, etc.)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Installation"
+msgid "WebDAV remote site already in sync!"
+msgstr "Le site distant WebDAV est d閖 synchronis闋!"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "Montrer les paquetages s閘ectionn閟 automatiquement"
+msgid "Reading printer database..."
+msgstr "Lecture de la base de donn閑s des imprimantes..."
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Vous ne pouvez pas d閟閘ectionner ce paquetage, il doit 阾re mis jour."
+msgid "Generate auto install floppy"
+msgstr "Cr閑r une disquette d'auto-installation"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Ce paquetage doit 阾re mis jour.\n"
-"蕋es-vous certain de vouloir le d閟閘ectionner?"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vous ne pouvez pas d閟閘ectionner ce paquetage. Il est d閖 install"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ce paquetage est n閏essaire, vous ne pouvez pas le d閟閘ectionner"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Vous ne pouvez pas s閘ectionner/d閟閘ectionner ce paquetage"
+"\t\t nom de connexion: %s\n"
+"\t\t dans le dossier: %s \n"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Les paquetages suivants vont 阾re d閟install閟"
+msgid "Somalia"
+msgstr "Somalie"
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Les paquetages suivants vont 阾re install閟"
+msgid "No open source driver"
+msgstr "Pas de pilote open-source"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Il n'y a pas assez de place pour installer ce paquetage"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Ce niveau de s閏urit est bas sur le pr閏閐ent mais le syst鑝e est "
+"maintenant\n"
+"compl鑤ement clos (vu du r閟eau). La s閏urit est maximale."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Importance: %s\n"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Taille: %d Ko\n"
+msgid "New Caledonia"
+msgstr "Nouvelle-Cal閐onie"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Protocole pour l'Europe (EDSS1)"
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
+msgid "Video mode"
+msgstr "Mode vid閛"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bad package"
-msgstr "Mauvais paquetage"
+msgid "Please enter your email address below "
+msgstr "Veuillez entrer votre adresse courriel ci -dessous"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other"
-msgstr "Autre"
+msgid "Oman"
+msgstr "Oman"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Taille totale: %d / %d Mo"
+msgid "Network Monitoring"
+msgstr "Surveillance du r閟eau"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Suivant ->"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "S閘ection individuelle des paquetages"
+msgid "New size in MB: "
+msgstr "Nouvelle taille en Mo: "
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Package Group Selection"
-msgstr "S閘ection des groupes de paquetages"
+msgid "Partition table type: %s\n"
+msgstr "Table des partitions de type: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Votre ordinateur poss鑔e peu de m閙oire. Vous aurez peut-阾re quelques\n"
-"probl鑝es pour installer Mandrake Linux. Si cela se produit, vous pouvez\n"
-"essayer de proc閐er une installation en mode texte. Pour cela, appuyez\n"
-"sur la touche 珷F1牷 apr鑣 l'amor鏰ge sur CD-Rom puis entrez 珷text牷."
+msgid "Authentication Windows Domain"
+msgstr "Authentification au Domaine Windows"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Sauvegarder la s閘ection des paquetages"
+msgid "US keyboard"
+msgstr "Am閞icain (蓆ats-Unis)"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatis閑"
+msgid "Buttons emulation"
+msgstr "蒻ulation des boutons"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Replay"
-msgstr "Rejouer"
+msgid ", network printer \"%s\", port %s"
+msgstr ", imprimante r閟eau 珷%s牷, port 珷%s牷"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
"\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-"L'auto-installation peut 阾re compl鑤ement automatique si n閏essaire,\n"
-"dans ce cas elle prend le contr鬺e du disque dur!!\n"
-"(pr関u pour l'installation d'une autre machine).\n"
"\n"
-"Vous pouvez pr閒閞er rejouer l'installation.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Cr閑r une disquette d'auto-installation"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Red閙arrage"
+"activit閟 de Drakbackup par cartouche:\n"
+"\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
"\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"Certaines 閠apes ne sont pas termin閑s.\n"
"\n"
-"Souhaitez-vous vraiment quitter maintenant?"
+"Probl鑝e de connexion FTP: impossible d'envoyer vos fichiers de sauvegarde "
+"par FTP.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Cr閍tion de la disquette d'auto-installation..."
+msgid "Sending Speed:"
+msgstr "Vitesse d'閙ission:"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ins閞ez une disquette vierge dans le lecteur %s"
+msgid "Halt bug"
+msgstr "Bogue de l'instruction halt"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vous aurez peut-阾re besoin de changer le p閞iph閞ique d'amor鏰ge\n"
-"de l'OpenFirmware pour activer le programme d'amor鏰ge. Si vous\n"
-"ne voyez pas appara顃re l'invite du programme d'amor鏰ge lorsque\n"
-"vous red閙arrerez, appuyez sur Command-Option-O-F au d閙arrage et\n"
-"entrez:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"Puis tapez: shut-down\n"
-"Au prochain d閙arrage vous devriez voir appara顃re l'invite du\n"
-"programme d'amor鏰ge."
+msgid "Mail alert configuration"
+msgstr "Configuration des alertes par courrier"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"L'installation du programme d'amor鏰ge a 閏hou pour la raison suivante:"
+msgid "Tokelau"
+msgstr "Tokelau"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "Installation du programme d'amor鏰ge..."
+msgid "Bosnian"
+msgstr "Bosniaque"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Une erreur est survenue lors de l'installation de 珷aboot牷.\n"
-"D閟irez-vous forcer l'installation au risque de d閠ruire la\n"
-"premi鑢e partition du disque?"
+msgid "Release: "
+msgstr "Version: "
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "D閟irez-vous utiliser 珷aboot牷?"
+msgid "Connection speed"
+msgstr "Vitesse de connexion"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-"Il semble que votre machine ne soit pas dot閑 de l'architecture "
-"珷NewWorld牷.\n"
-"Le programme d'amor鏰ge 珷yaboot牷 ne fonctionnera pas.\n"
-"L'installation va continuer, mais vous aurez besoin de 珷BootX牷 ou\n"
-"d'une autre m閠hode pour d閙arrer votre machine."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Pr閜aration du programme d'amor鏰ge..."
+"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
+"(d閠ecter avec 珷cdrecord -scanbus牷. Par exemple: 0,1,0 )"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Admin Password"
-msgstr "Mot de passe d'administration de domaine"
+msgid "Namibia"
+msgstr "Namibie"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
-msgstr "Nom d'administrateur de domaine"
+msgid "Database Server"
+msgstr "Serveur de base de donn閑s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Windows Domain"
-msgstr "Domaine Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
+"caract閞istiques sp閏iales du lecteur (capable de graver des m閐ias ou de "
+"lire des DVD)"
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Authentification au Domaine Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr ""
+"Impossible d'ajouter une partition au RAID md%d car\n"
+"celui-ci est d閖 format"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"Pour que cela fonctionne avec un Contr鬺eur Principal de Domaine (PDC) "
-"Windows 2000, vous devrez probablement demander l'administrateur de "
-"lancer: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
-"everyone /add et de red閙arrer le serveur.\n"
-"Vous aurez aussi besoin du nom utilisateur et du mot de passe d'un "
-"administrateur de domaine pour joindre la machine au domaine Windows(tm).\n"
-"Si le r閟eau n'est pas encore activ, le domaine sera joint apr鑣 l'閠ape de "
-"configuration du r閟eau.\n"
-"Si cette 閠ape 閏houe pour quelque raison que ce soit et que "
-"l'authentification de domaine ne fonctionne pas, lancez 'smbpasswd -j DOMAIN "
-"-U USER%%PASSWORD' en utilisant votre domaine Windows(tm), et vos nom "
-"d'administrateur et mot de passe, apr鑣 le d閙arrage du syst鑝e.\n"
-"La commande 'wbinfo -t' permet de tester la validit de votre "
-"authentification."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Serveur NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Domaine NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "Authentification NIS"
+"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle mais\n"
+"uniquement en utilisant XFree %s.\n"
+"Attention, veuillez noter que ce support est EXP蒖IMENTAL et peut BLOQUER\n"
+"VOTRE ORDINATEUR.\n"
+"\n"
+"Votre carte vid閛 est support閑 par XFree %s. Ce dernier peut 阾re plus\n"
+"performant en 2D."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Please wait, setting security options..."
+msgstr "Veuillez patienter, configuration des options de s閏urit..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "Serveur LDAP"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Inconnu|CPH05X (bt878) [nombreux vendeurs]"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "LDAP Base dn"
-msgstr "Racine (dn) LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Lancer l'interface graphique au d閙arrage"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Authentification LDAP"
+msgid "hourly"
+msgstr "toutes les heures"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid " Successfuly Restored on %s "
+msgstr ""
+" correctement restaur閑s en prenant 珷%s牷 comme dossier racine "
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local files"
-msgstr "Fichiers locaux"
+msgid "Making printer port available for CUPS..."
+msgstr "Mise disposition du port d'imprimante CUPS..."
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Authentification"
+msgid "Antigua and Barbuda"
+msgstr "Antigua-et-Barbuda"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Ce mot de passe est trop court (minimum %d caract鑢es)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! Ceci indique que le mot de passe connu par le syst鑝e est diff閞ent de "
+"celui\n"
+"connu par le Terminal Server. Effacez et ajoutez nouveau l'utilisateur\n"
+"au Terminal Server pour permettre la connexion."
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password"
-msgstr "Aucun"
+msgid "Spanish"
+msgstr "Espagnol"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Mot de passe root"
+msgid "Start"
+msgstr "D閙arrer"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"Vous n'avez pas configur le serveur d'affichage (XFree86). 蕋es-vous s鹯 de "
-"ce que vous faites?"
+"Arguments: (arg)\n"
+"\n"
+"Active/D閟active la v閞ification du mode espion des cartes r閟eau."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Services: %d activ閟 sur %d enregistr閟"
+msgid "Configuring applications..."
+msgstr "Configuration des applications..."
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Services"
-msgstr "Services"
+msgid "Normal modem connection"
+msgstr "Connexion par modem"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "System"
-msgstr "Syst鑝e"
+msgid "File Selection"
+msgstr "S閘ection de fichiers ou dossiers"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "%s on %s"
-msgstr "%s sur %s"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Quelle configuration RNIS/ISDN pr閒閞ez-vous?\n"
+"\n"
+"- L'ancienne configuration contient des outils puissants,\n"
+" mais est difficile configurer, et n'est pas standard.\n"
+" Elle utilise 珷isdn4net牷\n"
+"- La nouvelle configuration est plus facile comprendre\n"
+" et plus standard, mais a moins d'outils.\n"
+" Elle utilise 珷isdn-light牷\n"
+"Nous recommandons la seconde (isdn-light)\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Bootloader"
-msgstr "Programme d'amor鏰ge"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Boot"
-msgstr "Partition de d閙arrage"
+msgid "Run config tool"
+msgstr "Lancer l'outil de configuration"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "disabled"
-msgstr "d閟activ"
+msgid "Bootloader installation"
+msgstr "Installation du programme d'amor鏰ge"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "activated"
-msgstr "activ閑"
+msgid "Root partition size in MB: "
+msgstr "Taille de la partition racine en Mo: "
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Firewall"
-msgstr "Pare Feu"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Ce paquetage est n閏essaire, vous ne pouvez pas le d閟閘ectionner"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Security"
-msgstr "S閏urit"
+msgid "Etherboot ISO image is %s"
+msgstr "L'image ISO etherboot est %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Security Level"
-msgstr "Niveau de s閏urit"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"Named (BIND) est un Serveur de Noms de Domaine (DNS) qui est utilis pour "
+"convertir les adresses internet en adresses IP. (Il est principalement mis "
+"en place par les fournisseur d'acc鑣)"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Network"
-msgstr "R閟eau"
+msgid "Disconnect..."
+msgstr "Se d閏onnecter..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network & Internet"
-msgstr "R閟eau et Internet"
+msgid "Saint Lucia"
+msgstr "Sainte-Lucie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Graphical interface"
-msgstr "Interface graphique"
+msgid "Report"
+msgstr "Signaler"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hardware"
-msgstr "Mat閞iel"
+msgid "Palau"
+msgstr "Palaos (Les)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TV card"
-msgstr "Carte TV"
+msgid "level"
+msgstr "Niveau de RAID"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-"Aucune carte son d閠ect閑. Essayez avec 珷harddrake牷 apr鑣 l'installation"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Lancez 珷sndconfig牷 apr鑣 l'installation pour configurer la carte son"
+"Tous les incidents sont suivis par un interlocuteur unique et qualifi."
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Poss閐ez-vous une carte son ISA?"
+msgid "Package Group Selection"
+msgstr "S閘ection des groupes de paquetages"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sound card"
-msgstr "Carte son"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Restaurer via le Protocole R閟eau: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Serveur CUPS distant"
+msgid "You can configure each parameter of the module here."
+msgstr "Vous pouvez configurer ici chaque param鑤re du module."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "No printer"
-msgstr "Pas d'imprimante"
+msgid "Choose the resolution and the color depth"
+msgstr "Choix de la r閟olution et du nombre de couleurs"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Printer"
-msgstr "Imprimante"
+msgid "Emulate third button?"
+msgstr "蒻uler le troisi鑝e bouton?"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Souris"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Vous ne pouvez pas cr閑r de nouvelle partition\n"
+"(vous avez atteint le nombre maximum de partitions primaires).\n"
+"Retirez d'abord une partition primaire et cr閑z une partition 閠endue."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Timezone"
-msgstr "Fuseau horaire"
+msgid "Mount"
+msgstr "Monter"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Keyboard"
-msgstr "Clavier"
+msgid "Creating auto install floppy"
+msgstr "Cr閍tion de la disquette d'auto-installation"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Summary"
-msgstr "R閟um"
+msgid "Install updates"
+msgstr "Installer les mises jour"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "NTP Server"
-msgstr "Serveur NTP"
+msgid "text box height"
+msgstr "hauteur de la zone de texte"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Synchronisation automatique de l'horloge (via NTP)"
+msgid "State"
+msgstr "蓆at"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Horloge syst鑝e r間l閑 sur le Temps Universel (GMT)"
+msgid "Be sure a media is present for the device %s"
+msgstr "Assurez-vous qu'un m閐ium est pr閟ent dans le p閞iph閞ique %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "Quelle est votre fuseau horaire?"
+msgid "Enable multiple profiles"
+msgstr "Autoriser plusieurs profils"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "D閟irez-vous essayer nouveau ?"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
+"Ces options peuvent sauvegarder et restaurer\n"
+"tous les fichiers du dossier de configuration syst鑝e 珷/etc牷\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Impossible d'acc閐er au mirroir %s"
+msgid "Local printer"
+msgstr "Imprimante locale"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "T閘閏hargement de la liste des paquetages disponibles..."
+msgid "Files Restored..."
+msgstr "Fichiers restaur閟..."
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Choisissez un serveur miroir d'o t閘閏harger les paquetages"
+msgid "Package selection"
+msgstr "S閘ection des paquetages"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Connexion au site Web de Mandrake Linux pour obtenir la liste des serveurs "
-"miroirs disponibles..."
+msgid "Mauritania"
+msgstr "Mauritanie"
-# I added an example (install on a networked machine, and the server is connected to the Internet).
-# / J'ai rajout un exemple (voir texte) car cela me semble plus clair comme 玎.
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
"\n"
-"Do you want to install the updates ?"
msgstr ""
-"Vous avez maintenant la possibilit de t閘閏harger les mises jour\n"
-"cr殚es depuis la sortie de cette distribution. Il peut y avoir des "
-"correctifs de\n"
-" s閏urit ou des r閟olutions de bogues.\n"
+"Je peux conserver votre configuration actuelle, et supposer que vous avez "
+"d閖 configur un serveur DHCP; dans ce cas veuillez v閞ifier que j'ai "
+"correctement lu l'adresse du r閟eau de Classe C que vous utilisez pour votre "
+"r閟eau local; je ne le reconfigurerai pas et je ne toucherai pas la "
+"configuration de votre serveur DHCP.\n"
"\n"
-"Vous devez avoir une connexion internet pour les t閘閏harger,\n"
+"L'entr閑 DNS par d閒aut est le serveur cache de nom configur pour le pare-"
+"feu. Vous pouvez par exemple la remplacer par l'adresse IP du serveur DNS de "
+"votre fournisseur d'acc鑣.\n"
+"\t\t \n"
+"Sinon, je peux reconfigurer votre interface et (re)configurer un serveur "
+"DHCP votre place.\n"
"\n"
-"Souhaitez-vous installer les mises jour?"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ins閞ez la disquette de mise jour de modules dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ins閞ez la disquette d'amor鏰ge utilis閑 dans le lecteur %s"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Aucune imprimante locale n'a pu 阾re trouv閑!\n"
+"Pour en installer une manuellement entrez un nom de p閞iph閞ique ou de "
+"fichier sur la ligne d'entr閑 (Ports parall鑜es: /dev/lp0, /dev/lp1, ..., "
+"閝uivalents LPT1:, LPT2:, ..., premi鑢e imprimante USB: /dev/usb/lp0, "
+"deuxi鑝e imprimante USB: /dev/usb/lp1, ...) "
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Configuration post-installation"
+msgid "All primary partitions are used"
+msgstr "Toutes les partitions primaires sont utilis閑s"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
-"Installation du paquetage %s\n"
-"%d%%"
+"Une fois termin, il est recommand de red閙arrer votre interface graphique, "
+"afin d'関iter les probl鑝es li閟 au changement de nom d'h魌e de la machine."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "Pr閜aration de l'installation"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "D閠ection automatique et configuration du mat閞iel au d閙arrage."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-Rom 珷%s牷"
+msgid "Installation Server Configuration"
+msgstr "Configuration du serveur d'installation"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vous poss閐ez tous les CD-Rom ci-dessous, cliquez sur 珷OK牷.\n"
-"Si vous n'en poss閐ez aucun, cliquez sur 珷Annuler牷.\n"
-"Sinon, d閟閘ectionnez ceux que vous n'avez pas, puis cliquez sur 珷OK牷."
+msgid "Configuring IDE"
+msgstr "Configuration IDE"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All"
-msgstr "Tout"
+msgid "Network functionality not configured"
+msgstr "Les fonctions du r閟eau ne sont pas configur閑s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installation vraiment minimale (et en particulier pas d'urpmi)"
+msgid "Configure module"
+msgstr "Configuration du module"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Avec la documentation de base (recommand闋!)"
+msgid "Cocos (Keeling) Islands"
+msgstr "蝜es Cocos"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "With X"
-msgstr "Avec X"
+msgid "Disconnecting from the Internet "
+msgstr "D閏onnexion d'Internet en cours..."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+msgid "You'll need to reboot before the modification can take place"
msgstr ""
-"Vous n'avez s閘ectionn aucun groupe de paquetages.\n"
-"Veuillez choisir l'installation minimale d閟ir閑:"
+"Vous devez red閙arrer pour que les modifications soient prises en compte"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Type of install"
-msgstr "Type d'installation"
+msgid "Provider phone number"
+msgstr "Num閞o de t閘閜hone pour l'acc鑣"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "La taille s閘ectionn閑 est plus importante que la place disponible"
+msgid "Host %s"
+msgstr "H魌e%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Ins閞ez une disquette contenant une s閘ection de paquetages."
+msgid "Armenia"
+msgstr "Arm閚ie"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loading from floppy"
-msgstr "Chargement depuis la disquette..."
+msgid "Fiji"
+msgstr "Fidji"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "S閘ection des paquetages"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Arguments: (longueur, nbchiffres=0, nbmajuscules=0)\n"
+"\n"
+"R鑗le la longueur minimum, le nombre minimum de chiffres et le nombre "
+"minimum de lettres en majuscule d'un mot de passe."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Sauvegarder sur disquette..."
+msgid "Second floppy drive"
+msgstr "Second lecteur de disquette"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Load from floppy"
-msgstr "Charger partir d'une disquette..."
+msgid "About Harddrake"
+msgstr "A propos de Harddrake"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vous avez le choix entre:\n"
-"- Sauver sur disquette la s閘ection des paquetages.\n"
-"- 蓆ablir un nouveau choix de s閘ection partir d'une sauvegarde sur "
-"disquette.\n"
-"Le format est le m阭e que celui des disquettes g閚閞閑s pour l'installation "
-"automatis閑."
+msgid "Drive capacity"
+msgstr "Sp閏ificit閟 du lecteur"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
-"Votre syst鑝e ne dispose pas d'assez d'espace libre pour l'installation ou "
-"la mise jour (%d > %d)"
+"Ins閞ez une disquette dans le lecteur.\n"
+"Toutes les donn閑s pr閟entes sur cette disquette seront perdues."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "Recherche des paquetages disponibles..."
+msgid "Size: %s"
+msgstr "Taille: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Recherche des paquetages mettre jour..."
+msgid "Control and Shift keys simultaneously"
+msgstr "Touches <Ctrl> et <Maj> simultan閙ent"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Recherche des paquetages d閖 install閟..."
+msgid "secondary"
+msgstr "esclave"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Recherche des paquetages disponibles et reconstruction de la base de donn閑s "
-"rpm..."
+msgid "View Backup Configuration."
+msgstr "Voir la configuration de sauvegarde"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"La partition d'閏hange (swap) est insuffisante pour achever l'installation, "
-"veuillez en ajouter."
+msgid "if set to yes, report check result to syslog."
+msgstr "Si oui, envoie le rapport de v閞ification vers syslog."
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
-"Erreur la v閞ification du syst鑝e de fichiers %s. Souhaitez-vous corriger "
-"les erreurs? (attention, vous pouvez perdre des donn閑s)"
+msgid "No password"
+msgstr "Aucun"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "V閞ifier la pr閟ence de secteurs endommag閟?"
+msgid "Nigeria"
+msgstr "Nigeria"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "S閘ectionnez les partitions que vous souhaitez formater"
+msgid "There is no existing partition to use"
+msgstr "Pas de partition existante utiliser"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"Vous devez red閙arrer pour que les modifications apport閑s la\n"
-"table des partitions soient prises en compte"
+"Les scanners suivants:\n"
+"\n"
+"%s\n"
+"sont disponibles sur votre syst鑝e.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
-"Pas de place libre pour la partition d'amor鏰ge (bootstrap) de 1燤o."
-"L'installation va\n"
-"continuer, mais pour que votre syst鑝e puisse d閙arrer, vous aurez besoin "
-"de\n"
-"cr閑r la partition d'amor鏰ge avec DiskDrake."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Choix des points de montage"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Examen des partitions afin d'identifier les points de montage"
+"Pour imprimer sur une imprimante TCP ou socket, vous devez indiquer le nom "
+"d'h魌e de l'imprimante et, optionellement, le num閞o du port. Pour les "
+"serveurs d'impression 珷HP JetDirect牷, le num閞o du port est habituellement "
+"9100, mais cela peut 阾re diff閞ent pour d'autres serveurs. Veuillez "
+"consulter le manuel de votre imprimante."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No partition available"
-msgstr "Aucune partition disponible"
+msgid "Hard drive information"
+msgstr "Informations sur les disques durs"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Configuration IDE"
+msgid "Russian"
+msgstr "Russe"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Jordan"
+msgstr "Jordanie"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuration des cartes PCMCIA..."
+msgid "Hide files"
+msgstr "Cacher les fichiers"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Auto-detect printers connected to this machine"
+msgstr "D閠ecter automatiquement les imprimantes connect閑s sur cette machine"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "蒻ulation du bouton n 3"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV n'est pas install闋!\n"
+"\n"
+"\n"
+"Si vous avez une carte TV mais que DrakX ne l'a pas d閠ect閑 (pas de\n"
+"module bttv ni saa7134 dans 珷/etc/modules牷) ou que DrakX n'a pas install "
+"xawtv,\n"
+"envoyez, s'il vous pla顃, le r閟ultat de la commande 珷lspcidrake -v -f牷\n"
+" 珷install\\@mandrakesoft.com牷 avec comme sujet 珷undetected TV card牷.\n"
+"\n"
+"\n"
+"Vous pouvez quand m阭e l'installer en tapant 珷urpmi xawtv牷 dans un "
+"terminal en tant que root."
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "蒻ulation du bouton n 2"
+msgid "Sorry, no floppy drive available"
+msgstr "D閟ol, aucun lecteur de disquette ne semble disponible"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "蒻ulation des boutons"
+msgid "Bolivia"
+msgstr "Bolivie"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Veuillez choisir le port s閞ie sur lequel votre souris est connect閑."
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Param閠rez votre serveur Windows afin que l'imprimante soit disponible sous "
+"le protocole IPP et r間lez l'impression partir de cette machine-ci avec le "
+"type de connexion 珷%s牷 dans Printerdrake.\n"
+"\n"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Port souris"
+msgid "Bad package"
+msgstr "Mauvais paquetage"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Veuillez choisir le type de votre souris."
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Transformez votre ordinateur en un puissant serveur Linux. Les serveurs Web, "
+"de courrier, pare-feu, routeur, de fichiers et d'impression (etc.) ne sont "
+"qu' quelques clics."
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "Clef de chiffrement pour %s"
+msgid "DrakSec Basic Options"
+msgstr "Options de base de DrakSec"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Upgrade %s"
-msgstr "Mettre jour %s"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Note: si vous avez une carte ISA PnP, vous devrez utiliser le programme "
+"sndconfig.\n"
+"Vous n'avez qu' taper 珷sndconfig牷 dans une console."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "D閟irez-vous faire une installation ou une mise jour?"
+msgid "Romania"
+msgstr "Roumanie"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "Installation/Mise jour"
+msgid "choose device"
+msgstr "choisissez le p閞iph閞ique"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Voici la liste compl鑤e des claviers disponibles"
+msgid "Canada"
+msgstr "Canada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
+msgid "Remove from LVM"
+msgstr "Supprimer du LVM"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Quit"
-msgstr "Quitter"
+msgid "Timezone"
+msgstr "Fuseau horaire"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Licence"
+msgid "German"
+msgstr "Allemand"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Une erreur est survenue"
+msgid "Next ->"
+msgstr "Suivant ->"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-"<Tab> suivant | <Alt-Tab> pr閏閐ent | <Espace> s閘ectionner | <F12> 蒫ran "
-"suivant "
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installation de Mandrake Linux %s"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Cette partition est probablement\n"
+"une partition de pilotes syst鑝es,\n"
+"vous ne devriez pas la toucher.\n"
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "Aucun lecteur de disquette disponible"
+msgid "Guinea-Bissau"
+msgstr "Guin閑-Bissau"
-#: ../../install_steps.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenue sur %s"
+msgid "Horizontal refresh rate"
+msgstr "Fr閝uence horizontale"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Quelques paquetages importants n'ont pas 閠 correctement install閟. Il se\n"
-"peut que le lecteur de CD-Rom ou le CD-Rom lui-m阭e soit d閒ectueux. Vous\n"
-"pouvez vous assurer du bon 閠at de ce dernier en ex閏utant la commande "
-"suivante\n"
-"sur un ordinateur fonctionnant correctement: 珷rpm -qpl Mandrake/RPMS/*."
-"rpm牷\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Point de montage en double: %s"
+"Il est impossible de d閟閘ectionner ce point de montage car il est\n"
+"utilis pour du bouclage. Veuillez supprimer ce dernier d'abord."
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-"Une erreur est survenue et semble difficile r閟oudre correctement.\n"
-"Vous pouvez continuer, mais vos risques et p閞ils."
-
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Veuillez patienter"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Terminer"
-
-#: ../../interactive.pm:1 ../../standalone/draksec:1
-#, c-format
-msgid "Basic"
-msgstr "Basique"
+"L'interface r閟eau qui a 閠 configur閑 pendant l'installation ne peut pas "
+"阾re d閙arr閑 maintenant. Veuillez v閞ifier si votre r閟eau est activ apr鑣 "
+"d閙arrage. D閙arrez le 珷Centre de Contr鬺e Mandrake牷, v閞ifiez la "
+"configuration dans la section 珷r閟eau et internet / connexion牷. Puis "
+"essayez nouveau de configurer l'imprimante dans la section 珷Mat閞iel / "
+"Imprimante牷."
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avanc"
+msgid "USB controllers"
+msgstr "Contr鬺eurs USB"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Remove"
-msgstr "Enlever l'閘閙ent s閘ectionn"
+msgid "What norm is your TV using?"
+msgstr "Quelle norme utilise votre t閘関iseur?"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Modify"
-msgstr "Modifier l'閘閙ent s閘ectionn"
+msgid "Type:"
+msgstr "Type:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add"
-msgstr "Ajouter"
+msgid "Share name"
+msgstr "Nom de partage de l'imprimante"
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose a file"
-msgstr "Choisissez un fichier"
+msgid "enable"
+msgstr "activer"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Vous pouvez choisir ici la touche ou la combinaison de touches qui\n"
-"permettra de commuter entre les diff閞ents types de claviers\n"
-"(ex: latin et non latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Touche 珷Windows牷 droite"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Touche 珷Windows牷 gauche"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Touche 珷Menu牷"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Touches Alt et Shift simultan閙ent"
+"Connexion au site Web de Mandrake Linux pour obtenir la liste des serveurs "
+"miroirs disponibles..."
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Touches Ctrl et Alt simultan閙ent"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"Un probl鑝e est survenu pendant le red閙arrage du r閟eau: \n"
+"\n"
+"%s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "Touche CapsLock (verrouillage majuscule)"
+msgid "Remove the loopback file?"
+msgstr "Supprimer le fichier de boucle?"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Touches <Ctrl> et <Maj> simultan閙ent"
+msgid "Selected size is larger than available space"
+msgstr "La taille s閘ectionn閑 est plus importante que la place disponible"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Deux touches Shift simultan閙ent"
+msgid "NCP server name missing!"
+msgstr "Nom du serveur NCP manquant!"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "Touche Alt droite"
+msgid "Please choose your country."
+msgstr "Veuillez choisir votre pays."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Yougoslave (latin)"
+msgid "Hard Disk Backup files..."
+msgstr "Sauvegarde sur disque dur..."
#: ../../keyboard.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamien 珷colonne num閞ique牷 QWERTY"
+msgid "Laotian"
+msgstr "Laotien"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Am閞icain (international)"
+msgid "Samoa"
+msgstr "Samoa"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Am閞icain (蓆ats-Unis)"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"Le protocole rstat permet aux utilisateurs sur un m阭e r閟eau d'obtenir des "
+"mesures de la performance de n'importe quelle machine sur ce r閟eau."
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "UK keyboard"
-msgstr "Anglais (Angleterre)"
+msgid "Re-generating list of configured scanners ..."
+msgstr "R間閚閞ation de la liste des scanners configur閟..."
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ukrainien"
+msgid "Scanner"
+msgstr "Scanner"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (mod鑜e moderne 珷Q牷)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Attention: tester cette carte vid閛 peut bloquer votre ordinateur"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (mod鑜e traditionnel 珷F牷)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Le nom d'utilisateur ne peut contenir que des lettres minuscules,\n"
+"des nombres, ainsi que les caract鑢es 珷-牷 et 珷_牷"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Tajik keyboard"
-msgstr "Tadjik"
+msgid "Menudrake"
+msgstr "Menudrake"
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Tha飈andais"
+msgid "Welcome To Crackers"
+msgstr "Bienvenue aux pirates"
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Tamoul (fa鏾n machine 閏rire)"
+msgid "Module options:"
+msgstr "Options du module:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Tamoul (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "S閏urisez vos r閟eaux avec le Multi Newtwork Firewall"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serbe (cyrillique)"
+msgid "Go on without configuring the network"
+msgstr "Continuer sans configurer le r閟eau"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaque (QWERTY)"
+msgid "Abort"
+msgstr "Arr阾er"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaque (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Pas de demande de mot de passe sur %s l'entr閑 %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenian"
-msgstr "Slov閚ien"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "V閞ifiez que vous voulez utiliser un p閞iph閞ique non-rembobinable"
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swedish"
-msgstr "Su閐ois"
+msgid "Usage of remote scanners"
+msgstr "Utilisation des scanners distants"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russe (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-celle sur CDR.\n"
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Russe"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Votre partition FAT est trop fragment閑. Red閙arrez sous Windows\n"
+"et lancez le programme de d閒ragmentation 珷defrag牷,\n"
+"puis relancez l'installation de Mandrake Linux."
#: ../../keyboard.pm:1
#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Roumain (QWERTY)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak norv間ien"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Roumain (QWERTZ)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Sauvegarde sur disque dur..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadien (Qu閎ec)"
+msgid "Unable to fork: %s"
+msgstr "Ne peut d閐oubler (fork): %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Portuguese"
-msgstr "Portugais"
+msgid "Type: "
+msgstr "Type: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polonais (QWERTZ)"
+msgid "<-- Edit Client"
+msgstr "<-- Modifier un client"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polonais (QWERTY)"
+msgid "no fonts found"
+msgstr "aucune fonte trouv閑"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Norv間ien"
+msgid "Mouse"
+msgstr "Souris"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Hollandais"
+msgid "not enough room in /boot"
+msgstr "il n'y a pas assez de place dans le dossier /boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr "Maltais (US)"
+msgid "Choosing an arbitratry driver"
+msgstr "Choix arbitraire d'un pilote..."
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr "Maltais (UK)"
+msgid "Host name"
+msgstr "Nom d'h魌e:"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Mongolien (cyrillique)"
+msgid "Liechtenstein"
+msgstr "Liechtenstein"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Myanmar (Burmese)"
+msgid "the color of the progress bar"
+msgstr "la couleur de la barre de progression"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Macedonian"
-msgstr "Mac閐onien"
+msgid "Suppress Fonts Files"
+msgstr "Supprimer les fichiers de polices"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malayalam"
-msgstr "Malayalam"
+msgid "Add to RAID"
+msgstr "Ajouter au RAID"
-#: ../../keyboard.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Latvian"
-msgstr "Letton"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Vous pouvez ajouter des entr閑s suppl閙entaires au menu yaboot, soit pour\n"
+"d'autres syst鑝es d'exploitation, des noyaux alternatifs, ou pour des\n"
+"images de d閙arrage en cas de probl鑝e.\n"
+"\n"
+"Pour les autres OS, l'entr閑 n'est constitu閑 que d'une 閠iquette et d'une\n"
+"partition 珷root牷.\n"
+"\n"
+"Pour Linux, quelques options sont disponibles :\n"
+"\n"
+" * 蓆iquette : c'est simplement le nom que vous devrez taper lors de\n"
+"l'invite yaboot pour choisir cette option de d閙arrage ;\n"
+"\n"
+" * Image : c'est le nom de l'image noyau d閙arrer. G閚閞alement, on\n"
+"utilise vmlinux ou une variante de vmlinux avec une extension ;\n"
+"\n"
+" * Root : le p閞iph閞ique 珷root牷 ou 珷/牷 pour votre installation Linux ;\n"
+"\n"
+" * Adjonction (珷Append牷) : sur le mat閞iel Apple, l'option d'adjonction\n"
+"noyau est utilis閑 assez souvent afin d'aider l'initialisation de\n"
+"mat閞iel vid閛 ou pour permettre l'閙ulation de la souris clavier, vu que\n"
+"les souris Apple n'ont souvent qu'un bouton. Voici quelques exemples :\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd : cette option peut 阾re utilis閑 pour charger des modules\n"
+"initiaux avant que le p閞iph閞ique de d閙arrage ne soit disponible, ou pour\n"
+"charger une image de disque virtuel (珷ramdisk牷) dans le cas o une\n"
+"situation de d閙arrage d'urgence surviendrait ;\n"
+"\n"
+" * Initrd-size : la taille par d閒aut de l'image de disque virtuel est\n"
+"normalement 4 096 octets. Si vous avez besoin d'un grand espace de disque\n"
+"virtuel, cette option peut 阾re utilis閑 ;\n"
+"\n"
+" * Lecture-閏riture : normalement, la partition 珷root牷 est mont閑 en\n"
+"珷lecture seulement牷 pour permettre une v閞ification du syst鑝e de\n"
+"fichiers avant que le syst鑝e ne soit 珷live牷. Vous pouvez changer ces\n"
+"options dans cette section ;\n"
+"\n"
+" * NoVideo : si le mat閞iel vid閛 Apple devait tr鑣 mal fonctionner, vous\n"
+"pouvez s閘ectionner cette option pour d閙arrer en mode 珷novideo牷, avec\n"
+"une prise en charge native de la m閙oire d'image (珷frame buffer牷) ;\n"
+"\n"
+" * D閒aut : s閘ectionne cette entr閑 en tant que choix Linux par d閒aut. En\n"
+"tapant sur ENTR蒃 lors de l'invite de yaboot, vous y acc閐erez\n"
+"automatiquement. Cette entr閑 sera mise en 関idence par le biais d'une\n"
+"ast閞isque (珷*牷) et si vous cliquez sur la touche [Tab], vous verrez\n"
+"toutes les s閘ections de d閙arrage possibles."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanien 珷phon閠ique牷 QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "L'imprimante 珷%s牷 a 閠 ajout閑 avec succ鑣 StarOffice/OpenOffice"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanien 珷ligne de nombres牷 QWERTY"
+msgid "No floppy drive available!"
+msgstr "Aucun lecteur de disquette disponible!"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanien (AZERTY, nouveau mod鑜e)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Pour obtenir la liste des param鑤res disponibles pour l'imprimante courante, "
+"lisez la liste ci-dessous ou cliquez sur le bouton 珷imprimer la liste des "
+"options牷.%s%s\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanien (AZERTY, ancien mod鑜e)"
+msgid "Continue anyway?"
+msgstr "D閟irez-vous tout de m阭e continuer?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Laotian"
-msgstr "Laotien"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Si votre imprimante n'est pas list閑, choisissez-en une compatible (voir le "
+"manuel de l'imprimante) ou similaire."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latino-am閞icain"
+msgid "Printer"
+msgstr "Imprimante"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "Cor閑n"
+msgid "Saudi Arabia"
+msgstr "Arabie Saoudite"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japonais 106 touches"
+msgid "Internet"
+msgstr "internet"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Inuktitut"
-msgstr "Inuktitut"
+msgid "Some devices were added:\n"
+msgstr "Certains p閞iph閞iques ont 閠 ajout閟:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Italian"
-msgstr "Italien"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "G閛m閠rie: %s cylindres, %s t阾es, %s secteurs\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
-msgstr "Islandais"
+msgid "Printing on the printer \"%s\""
+msgstr "Impression sur l'imprimante 珷%s牷"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Iranian"
-msgstr "Iranien"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"/etc/hosts.allow et /etc/hosts.deny d閖 configur閟. Aucune modification"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Isra閘ien (phon閠ique)"
+msgid "Restore From Tape"
+msgstr "Restaurer partir d'une bande"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Isra閘ien"
+msgid "Choose the profile to configure"
+msgstr "Choisissez le profil configurer"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Croate"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"Entrez un nom d'h魌e ZeroConf sans point si vous ne\n"
+"voulez pas utiliser le nom par d閒aut."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "Hongrois"
+msgid "Backup Now from configuration file"
+msgstr "Sauvegarder partir de la configuration d閒inie"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr "Gurmukhi"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr ""
+"Les points de montage ne doivent contenir que des caract鑢es alphanum閞iques"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gujarati"
-msgstr "Gujarati"
+msgid "Restarting printing system..."
+msgstr "Red閙arrage du syst鑝e d'impression..."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Greek"
-msgstr "Grec"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Arguments: (nom)\n"
+"\n"
+"Exclue 珷nom牷 de la gestion des mots de passe par msec."
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "G閛rgien (disposition latine)"
+msgid "See hardware info"
+msgstr "Voir les informations sur le mat閞iel"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "G閛rgien (disposition russe)"
+msgid "First sector of boot partition"
+msgstr "Premier secteur de la partition d'amor鏰ge"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French"
-msgstr "Fran鏰is"
+msgid "Printer manufacturer, model"
+msgstr "Marque, mod鑜e"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finlandais"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Espagnol"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Configurateur pour Mandrake Terminal Server\n"
+"--enable : active MTS\n"
+"--disable : d閟active MTS\n"
+"--start : d閙arre MTS\n"
+"--stop : arr阾e MTS\n"
+"--adduser : ajoute un utilisateur syst鑝e existant au MTS (n閏essite "
+"un nom d'utilisateur)\n"
+"--deluser : enl鑦e un utilisateur syst鑝e existant du MTS (n閏essite "
+"un nom d'utilisateur)\n"
+"--addclient : ajoute une machine cliente au MTS (n閏essite une adresse "
+"MAC, IP, nom d'image nbi)\n"
+"--delclient : enl鑦e une machine cliente au MTS (n閏essite une adresse "
+"MAC, IP, nom d'image nbi)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Estonian"
-msgstr "Estonien"
+msgid "Subnet Mask:"
+msgstr "Masque de sous-r閟eau:"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak su閐ois"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "Installation r閡ssie des th鑝es pour l'image d'amor鏰ge et pour LILO."
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak norv間ien"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Les deux param鑤res importants sont la fr閝uence de rafra頲hissement\n"
+"verticale (qui d閠ermine la vitesse laquelle l'閏ran est rafra頲hi)\n"
+"et, surtout, la fr閝uence de synchronisation horizontale (qui d閠ermine\n"
+"la vitesse laquelle les lignes sont trac閑s).\n"
+"\n"
+"Il ne faut SURTOUT PAS choisir un type de moniteur ayant\n"
+"une fr閝uence de rafra頲hissement exc閐ant les capacit閟 de votre\n"
+"moniteur. Vous risqueriez de l'endommager.\n"
+"En cas de doute, choisissez un r間lage moins performant mais\n"
+"sans risque pour votre mat閞iel."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak am閞icain"
+msgid "Modify"
+msgstr "Modifier l'閘閙ent s閘ectionn"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Danish"
-msgstr "Danois"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Les commandes 珷%s牷 et 珷%s牷 permettent 間alement de modifier les "
+"param鑤res d'impression pour une impression particuli鑢e. Il suffit pour "
+"cela d'ajouter les param鑤res voulus sur la ligne de commande, par exemple "
+"珷%s <fichier>牷.\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Devanagari"
-msgstr "Devanagari"
+msgid "Need hostname, username and password!"
+msgstr ""
+"Le nom d'h魌e, le nom d'utilisateur et le mot de passe dont n閏essaires!"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Allemand (sans touches mortes)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV est un protocole qui vous permet de monter localement un dossier\n"
+"de serveur web, et de le traiter comme un syst鑝e de fichiers local ( "
+"condition\n"
+"que le serveur web soit configur en serveur WebDAV). Si vous voulez "
+"ajouter\n"
+"des points de montage WebDAV choisissez 珷Nouveau牷."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "German"
-msgstr "Allemand"
+msgid "HardDrake"
+msgstr "HardDrake"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tch鑡ue (QWERTY)"
+msgid "new"
+msgstr "Nouveau"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tch鑡ue (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "D閟irez-vous essayer nouveau ?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Suisse (fran鏰is)"
+msgid "Wizard"
+msgstr "Assistant"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Suisse (allemand)"
+msgid "Edit selected server"
+msgstr "Modifier le serveur s閘ectionn"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
-msgstr "Bl閘orusse"
+msgid "Please choose where you want to backup"
+msgstr "Veuillez choisir o stocker la sauvegarde"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnian"
-msgstr "Bosniaque"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Vous devez red閙arrer pour que les modifications apport閑s la\n"
+"table des partitions soient prises en compte"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Br閟ilien"
+msgid "Do not include the browser cache"
+msgstr "Ne pas inclure le cache du navigateur internet (fichiers tampon)"
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgare (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Veuillez choisir votre type de clavier."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgare (phon閠ique)"
+msgid "Standard"
+msgstr "Standard"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Bengali"
-msgstr "Bengale"
+msgid "Please choose your mouse type."
+msgstr "Veuillez choisir le type de votre souris."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Belgian"
-msgstr "Belge"
+msgid "Connect..."
+msgstr "Se connecter..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerba飀janais (latin)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "蒫hec de configuration de l'imprimante 珷%s牷!"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Arabic"
-msgstr "Arabe"
+msgid "not configured"
+msgstr "non configur"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Arm閚ien (phon閠ique)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Arm閚ien (machine 閏rire)"
+msgid "About"
+msgstr " propos"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Arm閚ien (ancien)"
+msgid "Proxies configuration"
+msgstr "Configuration des serveurs mandataires (proxy)"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Albanian"
-msgstr "Albanais"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Polish"
-msgstr "Polonais"
+msgid "Start: sector %s\n"
+msgstr "D閎ut: secteur %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak standard"
+msgid "Network interface already configured"
+msgstr "Interface r閟eau d閖 configur閑"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
+msgid "Couldn't access the floppy!"
+msgstr "Impossible d'acc閐er la disquette!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Zambia"
-msgstr "Zambie"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "Connexion l'assistant Bugzilla ..."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "South Africa"
-msgstr "Afrique du Sud"
+msgid "Mail Server"
+msgstr "Serveur de courrier"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Serbia"
-msgstr "Serbie"
+msgid "Please click on a partition"
+msgstr "Veuillez cliquer sur une partition"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
+msgid "Linux"
+msgstr "Linux"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Yemen"
-msgstr "Yemen"
+msgid "Have a nice day!"
+msgstr "Passez une bonne journ閑!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "across Network"
+msgstr "par r閟eau"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis et Futuna, 頻es"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid "Upgrade %s"
+msgstr "Mettre jour %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
+msgid "Select Printer Connection"
+msgstr "Type de connexion de l'imprimante"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "蝜es Vierges (US)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Recherche des canaux de t閘関ision en cours ..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "蝜es Vierges (Britanniques)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Erreur pendant l'envoi du fichier par FTP.\n"
+" Veuillez corriger votre configuration FTP"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+msgid "IP Range Start:"
+msgstr "D閎ut de la plage d'adresses IP:"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint-Vincent-et-les-Grenadines"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Le m閠aserveur 珷inetd牷 sert d閙arrer automatiquement les autres serveurs "
+"r閟eau lorsqu'une requ阾e est d閠ect閑. Il est notamment responsable du "
+"d閙arrage des serveurs telnet, ftp, rsh et rlogin, etc. Le d閟activer "
+"revient d閟activer tous les services qu'il g鑢e."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Vatican"
-msgstr "Vatican"
+msgid "the height of the progress bar"
+msgstr "la hauteur de la barre de progression"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Uzbekistan"
-msgstr "Ouzb閗istan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Sauvegarde via %s sur la machine: %s\n"
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
+msgid "Argentina"
+msgstr "Argentine"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "蝜es mineures des 蓆ats-Unis d'Am閞ique"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Accepte/refuse l'閏ho icmp 閙is par diffusion"
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Uganda"
-msgstr "Ouganda"
+msgid "Domain Name Server"
+msgstr "Serveur de Noms de domaine"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
+msgid "Security Level:"
+msgstr "Niveau de s閏urit闋:"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Tanzania"
-msgstr "Tanzanie"
+msgid "Mount points must begin with a leading /"
+msgstr "Les points de montage doivent commencer par /"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Taiwan"
-msgstr "Ta飛an"
+msgid "Postfix Mail Server"
+msgstr "Serveur de courrier Postfix"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Quit without saving"
+msgstr "Quitter sans sauvegarder"
#: ../../lang.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinit-et-Tobago"
+msgid "Yemen"
+msgstr "Yemen"
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Turkey"
-msgstr "Turquie"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Ce produit est disponible sur notre boutique en ligne."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tonga"
-msgstr "Tonga"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr "Taille maximale de sauvegarde:"
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Tunisia"
-msgstr "Tunisie"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Il y a beaucoup de choses choisir (%s).\n"
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr "Turkm閚istan"
+msgid "Hard drive detection"
+msgstr "D閠ection des disques durs"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr "Timor Oriental"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Vous n'avez s閘ectionn aucun groupe de paquetages.\n"
+"Veuillez choisir l'installation minimale d閟ir閑:"
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
+msgid "Please enter the WebDAV server URL"
+msgstr "Entrez l'adresse du serveur WebDAV"
#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tadjikistan"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "Tha飈ande"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Terres Australes Fran鏰ises"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Chad"
-msgstr "Tchad"
+msgid "Accept"
+msgstr "Accepter"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "蝜es Turks et Ca颿os"
+msgid "Description"
+msgstr "Description"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
+msgid "Error opening %s for writing: %s"
+msgstr "Erreur lors de l'ouverture de %s en 閏riture: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Syria"
-msgstr "Syrie"
+msgid "Mouse type: %s\n"
+msgstr "Type de souris: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle avec XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tom-et-Principe"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Veuillez choisir la taille de votre CD/DVD"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Suriname"
-msgstr "Suriname"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Autorise 珷su牷 seulement pour les membres du groupe 珷wheel牷 ou bien pour "
+"tout le monde."
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Somalia"
-msgstr "Somalie"
+msgid "Expert Area"
+msgstr "Mode Expert"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Senegal"
-msgstr "S閚間al"
+msgid "Choose a monitor"
+msgstr "Choisissez un moniteur"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "San Marino"
-msgstr "San Marin"
+msgid "Empty label not allowed"
+msgstr "Un label vide n'est pas autoris"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
+msgid "Maltese (UK)"
+msgstr "Maltais (UK)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "Slovaquie"
+msgid "I can't add any more partition"
+msgstr "Impossible d'ajouter une partition"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "蝜es Svalbard et Jan Mayen"
+msgid "Size in MB: "
+msgstr "Taille en Mo: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Slovenia"
-msgstr "Slov閚ie"
+msgid "Remote printer"
+msgstr "Imprimante distante"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Saint Helena"
-msgstr "Sainte-H閘鑞e"
+msgid "Please choose a language to use."
+msgstr "Choisissez la langue:"
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Singapore"
-msgstr "Singapour"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ATTENTION: ce p閞iph閞ique a d閖 閠 configur pour la connexion "
+"internet.\n"
+"\n"
+"Cliquez simplement sur 珷OK牷 pour conserver sa configuration.\n"
+"Sinon la configuration actuelle sera 閏ras閑 par les modifications que vous "
+"ferez."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Sudan"
-msgstr "Soudan"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+" la fin du d閙arrage, une session peut 阾re ouverte automatiquement pour un "
+"utilisateur."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
+msgid "Floppy format"
+msgstr "Type de lecteur de disquette"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Solomon Islands"
-msgstr "蝜es Salomon"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "Arabie Saoudite"
+msgid "Generic Printers"
+msgstr "Imprimantes g閚閞iques"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"Veuillez choisir l'imprimante sur laquelle les travaux d'impression seront "
+"envoy閟 ou tapez un nom de p閞iph閞ique ou de fichier dans le champ d'entr閑"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Russia"
-msgstr "Russie"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
+"Les scanners de cette machine sont utilisables par les autres ordinateurs"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Romania"
-msgstr "Roumanie"
+msgid "First sector of the root partition"
+msgstr "Premier secteur de la partition racine"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Reunion"
-msgstr "R閡nion, 頻e de la"
+msgid "Alternative drivers"
+msgstr "Autres pilotes"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Qatar"
-msgstr "Qatar"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"Veuillez cocher toutes les options dont vous avez besoin.\n"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Palau"
-msgstr "Palaos (Les)"
+msgid "Initrd"
+msgstr "Fichier RamDisk"
#: ../../lang.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "Cape Verde"
+msgstr "Cap-Vert"
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Le processeur a-t-il le bogue 珷coma牷 du Cyrix 6x86?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "Palestine"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"Les premiers Pentium 閠aient bogu閟 et se bloquaient pendant le d閏odage du "
+"bytecode f00f"
#: ../../lang.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
+msgid "Guam"
+msgstr "Guam"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Veuillez choisir le port sur laquelle votre imprimante est connect閑 ou "
+"tapez le nom du p閞iph閞ique ou de fichier dans le champs d'entr閑"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint-Pierre-et-Miquelon"
+msgid "/Options/Test"
+msgstr "/Options/Test"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Poland"
-msgstr "Pologne"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Ce niveau de s閏urit doit 阾re utilis avec pr閏aution. Il rend votre\n"
+"syst鑝e plus facile utiliser, aux d閜ens de la s閏urit. Il ne devrait\n"
+"donc pas 阾re utilis sur une machine connect閑 un r閟eau ou Internet.\n"
+"Aucun mot de passe n'est requis."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "Mounting partition %s"
+msgstr "Montage de la partition %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Philippines"
-msgstr "Philippines"
+msgid "User name"
+msgstr "Nom d'utilisateur"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "Papouasie-Nouvelle-Guin閑"
+msgid "New configuration (isdn-light)"
+msgstr "Nouvelle configuration (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "French Polynesia"
-msgstr "Polyn閟ie Fran鏰ise"
+msgid "Userdrake"
+msgstr "Userdrake"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Peru"
-msgstr "P閞ou"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Quelle partition d閟irez-vous utiliser pour Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Backup system"
+msgstr "Sauvegarder le syst鑝e"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid "Test pages"
+msgstr "Pages de test"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New Zealand"
-msgstr "Nouvelle-Z閘ande"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Liste de donn閑s restaurer:\n"
+"\n"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Niue"
-msgstr "Nioue"
+msgid "Checking %s"
+msgstr "V閞ification de %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "TCP/Socket Printer Options"
+msgstr "Options de l'imprimante r閟eau (TCP/socket)"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "N閜al"
+msgid "Card mem (DMA)"
+msgstr "Plage m閙oire (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "France"
+msgstr "France"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
+msgid "browse"
+msgstr "naviguer"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr "蝜e Norfolk"
+msgid "Checking installed software..."
+msgstr "V閞ification du logiciel install..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Remote printer name missing!"
+msgstr "Le nom de l'imprimante est manquant!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "Nouvelle-Cal閐onie"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"Souhaitez-vous activer l'impression sur les imprimantes de votre r閟eau?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
-msgstr "Namibie"
+msgid "Turkey"
+msgstr "Turquie"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel Speedtouch USB"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malaysia"
-msgstr "Malaisie"
+msgid "Number of buttons"
+msgstr "Nombre de bouttons"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Mexico"
-msgstr "Mexique"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamien 珷colonne num閞ique牷 QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Malawi"
-msgstr "Malawi"
+msgid "Module"
+msgstr "Module"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maldives"
-msgstr "Maldives"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"De plus, les files d'attente qui n'ont pas 閠 cr殚es avec ce programme ou "
+"avec 玣oomatic-configure ne peuvent pas 阾re transf閞閑s."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "Maurice"
+msgid "Hardware"
+msgstr "Mat閞iel"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malta"
-msgstr "Malte"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Touches Ctrl et Alt simultan閙ent"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "United States"
+msgstr "蓆ats-Unis"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "Mauritanie"
+msgid "Default OS?"
+msgstr "Syst鑝e d'exploitation par d閒aut?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Martinique"
-msgstr "Martinique"
+msgid "Swiss (German layout)"
+msgstr "Suisse (allemand)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Northern Mariana Islands"
-msgstr "蝜es Mariannes du Nord"
+msgid "Configure all heads independently"
+msgstr "Configurer les 閏rans s閜ar閙ent"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "Mongolie"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"Veuillez choisir l'imprimante que vous voulez configurer. La configuration "
+"de cette imprimante sera effectu閑 automatiquement. Si votre imprimante n'a "
+"pas 閠 correctement d閠ect閑 ou si vous pr閒閞ez effectuer une "
+"configuration personnalis閑, activez 珷Configuration Manuelle 牷."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "Birmanie"
+msgid "NTP Server"
+msgstr "Serveur NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Load/Save on floppy"
+msgstr "Charger/Sauver sur disquette"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Macedonia"
-msgstr "Mac閐oine"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Ces th鑝es n'avaient pas encore d'image de d閙arrage dans %s!"
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Marshall Islands"
-msgstr "蝜es Marshall"
+msgid "nice"
+msgstr "utile"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
+msgid "Leaving in %d seconds"
+msgstr "Fin dans %d secondes"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Moldova"
-msgstr "R閜ublique de Moldova"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Veuillez choisir le port s閞ie sur lequel votre modem est connect."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Monaco"
-msgstr "Monaco"
+msgid "Country"
+msgstr "Pays"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Morocco"
-msgstr "Maroc"
+msgid "Property"
+msgstr "Propiet閟"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Libya"
-msgstr "Libye"
+msgid "Ghostscript"
+msgstr "Ghostscript"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Latvia"
-msgstr "Lettonie"
+msgid "LAN Configuration"
+msgstr "Configuration du LAN (r閟eau local)"
#: ../../lang.pm:1
#, c-format
-msgid "Luxembourg"
-msgstr "Luxembourg"
+msgid "Ghana"
+msgstr "Ghana"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuania"
-msgstr "Lituanie"
+msgid "Path or Module required"
+msgstr "Le chemin ou le module est n閏essaire"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
+msgid "Advanced Options"
+msgstr "Options avanc閑s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Liberia"
-msgstr "Lib閞ia"
+msgid "Coma bug"
+msgstr "Bogue de 珷coma牷"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+" cette 閠ape, vous devez s閘ectionner quelle partition sera utilis閑 pour\n"
+"votre syst鑝e Mandrake Linux. Si votre disque est d閖 partitionn, soit\n"
+"par une autre installation GNU/Linux ou par un autre outil de\n"
+"partitionnement, vous pourrez les utiliser. Sinon, les partitions devront\n"
+"阾re cr殚es.\n"
+"\n"
+"Pour cr閑r une partition, vous devez d'abord s閘ectionner le disque 郳n"
+"utiliser. Vous pouvez le s閘ectionner en cliquant sur 珷hda牷 pour le\n"
+"premier disque IDE, 珷hdb牷, pour le second, 珷sda牷 pour le premier disque\n"
+"SCSI, et ainsi de suite.\n"
+"\n"
+"Pour partitionner, le disque dur s閘ectionn, vous pouvez utiliser les\n"
+"options suivantes :\n"
+"\n"
+" * 珷%s牷: cette option effacera toutes les partitions sur le disque\n"
+"s閘ectionn;\n"
+"\n"
+" * 珷%s牷: cette option permet de cr閑r un syst鑝e de ficher ext3 et\n"
+"珷Swap牷 dans l'espace libre sur votre disque;\n"
+"\n"
+"珷%s牷: permet d'acc閐er des fonctionnalit閟 additionnelles :\n"
+"\n"
+" * 珷%s牷: sauve la table de partition sur un disque amovibles. Cette\n"
+"option s'av鑢e particuli鑢ement pratique pour r閜arer des partitions\n"
+"endommag閑s. Il est fortement recommand de proc閐er ainsi;\n"
+"\n"
+" * 珷%s牷: permet de restaurer une table de partition sauv閑 au pr閍lable\n"
+"sur une disquette.\n"
+"\n"
+" * 珷%s牷: si votre table de partition est endommag閑, vous pouvez essayer\n"
+"de la r閏up閞er avec ces options. Soyez prudent et sachez que cela ne\n"
+"fonctionne pas coup s鹯.\n"
+"\n"
+" * 珷%s牷: 閏arte les changements et charge la table de partition initiale;\n"
+"\n"
+" * 珷%s牷: en cochant cette case, les CD-ROM et disquettes (et autres\n"
+"support) seront charg閟 automatiquement.\n"
+"\n"
+" * 珷%s牷: utilisez cette option si vous souhaitez utiliser un assistant\n"
+"pour partitionner votre disque. Cette option est particuli鑢ement\n"
+"recommand閑 si vous faites vos premiers pas avec les partitions.\n"
+"\n"
+" * 珷%s牷: utilisez cette option pour annuler vos changements;\n"
+"\n"
+" * 珷%s牷: permet des actions additionnelles sur les partitions (type,\n"
+"options, format) et donne plus d'informations;\n"
+"\n"
+" * 珷%s牷: une fois le partitionnement termin, ce bouton vous permettra de\n"
+"sauvegarder vos changements sur le disque.\n"
+"\n"
+"Lorsque vous d閒inissez la taille d'une partition, vous pouvez choisir\n"
+"pr閏is閙ent la taille de celle-ci en utilisant les Fl鑓hes de votre\n"
+"clavier.\n"
+"\n"
+"Note: vous pouvez atteindre toutes les options en utilisant le clavier.\n"
+"Naviguer avec les fl鑓hes et [Tab].\n"
+"\n"
+"Une fois la partition s閘ectionn閑, vous pouvez utiliser :\n"
+"\n"
+" * Ctrl-c pour cr閑r un nouvelle partition (lorsqu'une partition vide est\n"
+"s閘ectionn閑;\n"
+"\n"
+" * Ctrl-d pour effacer une partition;\n"
+"\n"
+" * Ctrl-m pour d閒inir le 珷mount point牷\n"
+"\n"
+"Pour obtenir plus d'information sur les syst鑝es de fichiers, veuillez lire\n"
+"sur le syst鑝e de fichier ext2FS dans 珷Manuel de r閒閞ence牷.\n"
+"\n"
+"Si vous installez sur un poste PPC, vous devrez cr閑r une petite partition\n"
+"HFS 珷bootstrap牷 d'au moins 1 Mo qui sera utilis閑 par le chargeur de\n"
+"d閙arrage (珷bootloader牷) yaboot. Si vous optez pour une partition plus\n"
+"grande, disons 50Mo, vous trouverez utile d'y placer des noyaux et des\n"
+"images 珷ramdisk牷 accessibles en cas de probl鑝e."
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"Carte graphique\n"
+"\n"
+" Le programme d'installation d閠ecte et configure automatiquement les\n"
+"cartes graphiques pr閟entes sur votre machine. Si ce n'est pas le cas, vous\n"
+"pouvez choisir dans cette liste la carte que vous utilisez effectivement.\n"
+"\n"
+" Dans le cas o diff閞ents serveurs seraient disponible pour votre carte,\n"
+"avec ou sans acc閘閞ation 3D, il vous est alors propos de choisir le\n"
+"serveur qui vous conviendra le mieux."
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Lucia"
-msgstr "Sainte-Lucie"
+msgid "There was an error installing packages:"
+msgstr "Erreur lors de l'installation des paquetages:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "Liban"
+msgid "Lexmark inkjet configuration"
+msgstr "Configuration de l'imprimante Lexmark inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Laos"
-msgstr "Laos"
+msgid "Undo"
+msgstr "蓆at pr閏閐ent"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
+msgid "Save partition table"
+msgstr "Sauvegarder la table des partitions..."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Cayman Islands"
-msgstr "蝜es Ca飉an"
+msgid "Finnish"
+msgstr "Finlandais"
#: ../../lang.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "Koweit"
+msgid "Macedonia"
+msgstr "Mac閐oine"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Korea"
-msgstr "Cor閑"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Pour autoriser un utilisateur partager ses dossiers, vous devez ajouter "
+"cet utilisateur dans le groupe 珷fileshare牷.\n"
+"Ceci peut se faire gr鈉e au programme 珷Userdrake牷."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Korea (North)"
-msgstr "Cor閑 du Nord"
+msgid "Slovenian"
+msgstr "Slov閚ien"
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint-Kitts-et-Nevis"
+msgid "Libya"
+msgstr "Libye"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Comoros"
-msgstr "Comores"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Configuration des scripts, installation des logiciels, d閙arrage des "
+"serveurs..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Graver le CD"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cambodia"
-msgstr "Cambodge"
+msgid "Table"
+msgstr "Table des partitions"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirghizistan"
+msgid "I don't know how to format %s in type %s"
+msgstr "Impossible de formater %s au format %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Model"
+msgstr "Mod鑜e"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Japan"
-msgstr "Japon"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Active/D閟active la biblioth鑡ue libsafe si elle est trouv閑 sur le syst鑝e."
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Jordan"
-msgstr "Jordanie"
+msgid "Stop Server"
+msgstr "Arr阾er le serveur"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Jamaica"
-msgstr "Jama飍ue"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"S閘ectionnez un th鑝e pour LILO\n"
+"et l'image pendant l'amor鏰ge,\n"
+"vous pouvez les choisir \n"
+"s閜ar閙ent"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Iceland"
-msgstr "Islande"
+msgid "Modem"
+msgstr "Modem"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Iran"
-msgstr "Irak"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Permet/interdit les connexions Xfree. Le premier argument sp閏ifie ce qui "
+"est fait\n"
+"du c魌 client: ALL (toutes connexions permises), LOCAL (seulement les "
+"connexions\n"
+"locales) et NONE (aucune connexion)."
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
-msgstr "Irak"
+msgid "Tuvalu"
+msgstr "Tuvalu"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Territoire Britannique de l'oc閍n Indien"
+msgid "Use auto detection"
+msgstr "Utiliser la d閠ection automatique"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "India"
-msgstr "Inde"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM permet d'utiliser la souris dans des applications fonctionnant en mode "
+"texte dans la console (comme par exemple Midnight Commander). Il permet "
+"間alement d'utiliser le copier-coller et inclut le support des menus "
+"contextuels sur la console."
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Israel"
-msgstr "Isra雔"
+msgid "Started on boot"
+msgstr "Lancer au d閙arrage"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Ireland"
-msgstr "Irlande"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Rejoignez les 閝uipes de support de MandrakeSoft et la communaut Linux. "
+"Partagez vos connaissances et aidez les autres en devenant un Expert reconnu "
+"sur le site Web de support technique :"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Indonesia"
-msgstr "Indon閟ie"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"Les options suivantes permettent de personnaliser la s閏urit de votre "
+"syst鑝e.\n"
+"Si vous avez besoin d'explications, jetez un oeil aux bulles d'aide.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "Hongrie"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
+"Trouver automatiquement des imprimantes disponibles sur des machines "
+"distantes."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Haiti"
-msgstr "Ha飔i"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Sauvegarde sur bande via le p閞iph閞ique: %s"
#: ../../lang.pm:1
#, c-format
-msgid "Croatia"
-msgstr "Croatie"
+msgid "East Timor"
+msgstr "Timor Oriental"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Honduras"
-msgstr "Honduras"
+msgid "Del profile..."
+msgstr "Effacer le profil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "蝜es Heard et McDonald"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Permet/interdit la liste des utilisateurs du syst鑝e sur les gestionnaires "
+"de connexion (kdm et gdm)."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hong Kong"
-msgstr "Hong-Kong"
+msgid "Installing Foomatic..."
+msgstr "Installation de Foomatic..."
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "China"
-msgstr "Chine"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
+"Veuillez vous d閏onnecter puis presser simultan閙ent les touches Ctrl-Alt-"
+"BackSpace"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guyana"
-msgstr "Guyana"
+msgid "detected"
+msgstr "d閠ect"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guin閑-Bissau"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Le r閟eau doit 阾re red閙arr. Souhaitez-vous le red閙arrer?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guam"
-msgstr "Guam"
+msgid "Package: "
+msgstr "Paquetage: "
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Impossible d'閏rire dans /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "G閛rgie du Sud et 蝜es Sandwich du Sud"
+msgid "SECURITY WARNING!"
+msgstr "ALERTE DE S蒀URIT蔂!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guin閑 蓂uatoriale"
+msgid "StarOffice"
+msgstr "StarOffice"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
+msgid "No, I don't want autologin"
+msgstr "Ne pas connecter automatiquement un utilisateur"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Guinea"
-msgstr "Guin閑"
+msgid "Windows Migration tool"
+msgstr "Outil de migration windows"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Gambia"
-msgstr "Gambie"
+msgid "All languages"
+msgstr "Toutes les langues"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Greenland"
-msgstr "Groenland"
+msgid "Removing %s"
+msgstr "Suppression de %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+msgid "Testing your connection..."
+msgstr "Test de votre connexion..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ghana"
-msgstr "Ghana"
+msgid "Cache size"
+msgstr "Taille du cache"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "Guyane Fran鏰ise"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Les mots de passe sont maintenant requis. Pour autant, il n'est pas\n"
+"recommand d'utiliser cette machine sur un r閟eau."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Georgia"
-msgstr "G閛rgie"
+msgid "Start sector: "
+msgstr "Secteur de d閎ut: "
#: ../../lang.pm:1
#, c-format
-msgid "Grenada"
-msgstr "Grenade"
+msgid "Congo (Brazzaville)"
+msgstr "Congo (Brazzaville)"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "Royaume-Uni"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Le paquetage %s doit 阾re install. Souhaitez-vous l'installer?"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "Gabon"
+msgid "Seychelles"
+msgstr "Seychelles"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
-msgstr "蝜es Faroe"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Le nom de mod鑜e r閟ultant de l'autod閠ection a 閠 compar閑 la base de "
+"donn閑s d'imprimantes pour trouver la meilleure correspondance. Ce choix "
+"peut 阾re mauvais, particuli鑢ement si votre mod鑜e d'imprimanten'appara顃 "
+"pas dans la base de donn閑s. V閞ifiez ce choix, puis cliquez sur珷Le mod鑜e "
+"est correct牷, ou le cas 閏h閍nt sur 珷S閘ectionner manuellement le "
+"mod鑜e牷.\n"
+"\n"
+"Votre imprimante a 閠 d閠ect閑 comme 閠ant:\n"
+"\n"
+"%s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "Micron閟ie"
+msgid "Bad password on %s"
+msgstr "Mauvais mot de passe sur %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "蝜es Malouinnes"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Il y a une imprimante inconnue connect閑 votre machine"
#: ../../lang.pm:1
#, c-format
-msgid "Fiji"
-msgstr "Fidji"
+msgid "Zambia"
+msgstr "Zambie"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Finland"
-msgstr "Finlande"
+msgid "Security Administrator (login or email)"
+msgstr "Administrateur s閏urit (nom d'utilisateur ou adresse de courriel)"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Ethiopia"
-msgstr "蓆hiopie"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "D閟ol, nous ne prenons en charge que les noyaux (kernel) 2.4."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Spain"
-msgstr "Espagne"
+msgid "Romanian (qwerty)"
+msgstr "Roumain (QWERTY)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Eritrea"
-msgstr "蓃ythr閑"
+msgid "Under Devel ... please wait."
+msgstr "En d関eloppement ... veuillez patienter."
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "Sahara Occidental"
+msgid "Czech Republic"
+msgstr "R閜ublique Tch鑡ue"
#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "蒰ypte"
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Estonie"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "蓂uateur"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Alg閞ie"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominique"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "Dominique"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Denmark"
-msgstr "Danemark"
+msgid "Old configuration (isdn4net)"
+msgstr "Ancienne configuration (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
+msgid "Sound card"
+msgstr "Carte son"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cyprus"
-msgstr "Chypre"
+msgid "Import Fonts"
+msgstr "Importation de polices"
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Christmas Island"
-msgstr "蝜e Christmas"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Votre disque poss鑔e une seule grosse partition Windows.\n"
+"Vous devriez la r閐uire pour pouvoir cr閑r d'autres partitions:\n"
+"cliquez sur la partition puis sur 珷Redimensionner牷."
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Cape Verde"
-msgstr "Cap-Vert"
+msgid "Suppress Temporary Files"
+msgstr "Supprimer les fichiers temporaires"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr "Cuba"
+msgid "Change partition type"
+msgstr "Changement du type de partition"
-#: ../../lang.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Colombia"
-msgstr "Colombie"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"R閟olution\n"
+"\n"
+" Vous pouvez choisir ici la r閟olution et nombre de couleur parmi celles\n"
+"disponibles pour votre mat閞iel. Choisissez la configuration optimale pour\n"
+"votre utilisation (vous pourrez n閍nmoins modifier cela apr鑣\n"
+"l'installation). Un 閏hantillon de la configuration choisie appara顃 dans\n"
+"le moniteur stylis."
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Cameroon"
-msgstr "Cameroun"
+msgid "Network Options"
+msgstr "Options r閟eau"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Chile"
-msgstr "Chili"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Affiche le th鑝e\n"
+"dans la console"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Cook Islands"
-msgstr "蝜es Cook"
+msgid "Statistics"
+msgstr "Statistiques"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "C魌e d'Ivoire"
+msgid "(on %s)"
+msgstr "(sur %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "Suisse"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Une biblioth鑡ue qui prot鑗e contre les attaques par d閎ordement de pile.\n"
+"(les plus fr閝uentes)"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Central African Republic"
-msgstr "R閜ublique Centrafricaine"
+msgid "average"
+msgstr "moyenne"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
+msgid "New printer name"
+msgstr "Nouveau nom de l'imprimante"
#: ../../lang.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "蝜es Cocos"
+msgid "Equatorial Guinea"
+msgstr "Guin閑 蓂uatoriale"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada"
-msgstr "Canada"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Active/D閟active la connexion automatique (autologin)."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belize"
-msgstr "Belize"
+msgid "Build Backup"
+msgstr "Sauvegarder!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belarus"
-msgstr "B閘arus"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"Pour imprimer un fichier depuis la ligne de commande (une fen阾re de "
+"terminal), utilisez la commande 珷%s <fichier>牷 ou 珷%s <fichier>牷.\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Botswana"
-msgstr "Botswana"
+msgid "Currently, no alternative possibility is available"
+msgstr "Il n'y a pour l'instant pas de solution alternative"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr "蝜e Bouvet"
+msgid "Romanian (qwertz)"
+msgstr "Roumain (QWERTZ)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bhutan"
-msgstr "Bhoutan"
+msgid "Write Config"
+msgstr "蒫rire la configuration"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Le service routed permet la mise jour automatique des tables de routage IP "
+"gr鈉e au protocole RIP. Bien que RIP soit tr鑣 utilis sur les petits "
+"r閟eaux, des protocoles de routage plus complets sont n閏essaires pour les "
+"r閟eaux de plus grande taille. "
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "Br閟il"
+msgid "Kiribati"
+msgstr "Kiribati"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "Bolivie"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Active/D閟active la connexion distante en tant que root."
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr "Sultanat de Brunei"
+msgid "Browse"
+msgstr "Naviguer"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "Bermudes"
+msgid "CDROM"
+msgstr "CD-Rom"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Benin"
-msgstr "B閚in"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Souhaitez-vous vous connecter Internet maintenant?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+msgid "Belgian"
+msgstr "Belge"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "Bahre飊"
+msgid "Do you have an ISA sound card?"
+msgstr "Poss閐ez-vous une carte son ISA?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarie"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Aucune carte r閟eau n'a 閠 d閠ect閑 sur votre syst鑝e.\n"
+"La connexion ne peut donc pas 阾re configur閑."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+msgid "Windows"
+msgstr "Windows"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
+msgid "Can't make screenshots before partitioning"
+msgstr "Impossible de faire des captures d'閏ran avant le partitionnement"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Barbados"
-msgstr "Barbade"
+msgid "Host Name"
+msgstr "Nom d'h魌e"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnie Herz間ovine"
+msgid "/File/Save _As"
+msgstr "/Fichier/_Enregistrer sous"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
-msgstr "Azerba飀jan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Pour obtenir l'acc鑣 aux imprimantes situ閑s sur des serveurs CUPS distants "
+"de votre r閟eau local, vous avez seulement besoin d'activer l'option "
+"\"Trouver automatiquement des imprimantes disponibles sur des machines "
+"distantes\". Les serveurs CUPS informent votre machine automatiquement sur "
+"leurs imprimantes. Toutes les imprimantes actuellement connues par votre "
+"machine sont list閑s dans la section \"Imprimantes distantes\" dans la "
+"fen阾re principale de Printerdrake. Si les serveurs CUPS ne sont pas dans "
+"votre r閟eau local, vous devez entrer leur adresse IP et optionnellement "
+"leur num閞o de port, afin d'obtenir des informations sur les imprimantes qui "
+"y sont connect閑s."
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s n'est pas dans la base des scanners, configuration manuelle?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Australia"
-msgstr "Australie"
+msgid "Delay before booting default image"
+msgstr "D閘ai avant l'activation du choix par d閒aut"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "American Samoa"
-msgstr "Samoa Am閞icaine"
+msgid "Restrict command line options"
+msgstr "Prot間er par mot de passe les options"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Argentina"
-msgstr "Argentine"
+msgid "East Europe"
+msgstr "Europe de l'est"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "Antarctique"
+msgid "Use free space"
+msgstr "Utiliser l'espace libre"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Angola"
-msgstr "Angola"
+msgid "use dhcp"
+msgstr "utiliser 珷dhcp牷"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antilles n閑rlandaises"
+msgid "Mail alert"
+msgstr "Alerte par courrier"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Armenia"
-msgstr "Arm閚ie"
+msgid "Internet configuration"
+msgstr "Configuration de l'acc鑣 Internet"
#: ../../lang.pm:1
#, c-format
-msgid "Albania"
-msgstr "Albanie"
+msgid "Uzbekistan"
+msgstr "Ouzb閗istan"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
+msgid "Detected %s"
+msgstr "D閠ect %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua-et-Barbuda"
+msgid "/Autodetect _printers"
+msgstr "/Auto-d閠ecter les _imprimantes"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "蒻irats Arabes Unis"
+msgid "Finish"
+msgstr "Terminer"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Andorra"
-msgstr "Andorre"
+msgid "Show automatically selected packages"
+msgstr "Montrer les paquetages s閘ectionn閟 automatiquement"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
+msgid "CPU flags reported by the kernel"
+msgstr "Drapeaux processeurs indiqu閟 par du noyau"
#: ../../lang.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Points de montage circulaires %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Enlevez d'abord les volumes logiques\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Le support du PCMCIA n'est plus disponible avec les noyaux 2.2. Veuillez "
-"utiliser un noyau 2.4."
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "VEUILLEZ FAIRE TOURNER LA MOLETTE!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Pour activer la souris,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Veuillez tester votre souris"
+msgid "Togo"
+msgstr "Togo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No mouse"
-msgstr "Pas de souris"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Quelque chose s'est mal pass闋! mkisofs est-il bien install闋?"
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "none"
-msgstr "aucun"
+msgid "16 MB"
+msgstr "16 Mo"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 boutons"
+msgid "Please try again"
+msgstr "Veuillez r閑ssayer"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 boutons"
+msgid "The model is correct"
+msgstr "Le mod鑜e est correct"
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 bouton"
+msgid "FAT resizing failed: %s"
+msgstr "Le redimensionnement de la partition FAT a 閏hou闋: %s"
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "busmouse"
-msgstr "souris bus"
+msgid "Individual package selection"
+msgstr "S閘ection individuelle des paquetages"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Cette partition ne peut pas 阾re redimensionn閑"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Souris Logitech (s閞ie, ancien mod鑜e C7)"
+msgid "Location"
+msgstr "Emplacement"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "USA (c鈈le ou HRC)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "SF journalis"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "Guatemala"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Cette machine"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Lettre de lecteur DOS suppos閑: %s:\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "S閘ectionnez les fichiers ou dossiers puis cliquez sur 珷Ajouter牷"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Bahre飊"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "ne pas tenir compte des modules SCSI"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Souris standard 3 boutons"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Famille du processeur (exemple: 6 pour la classe des i686)"
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Souris standard 2 boutons"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Comme vous 阾es en train de faire une installation r閟eau,\n"
+" cela veut dire que votre r閟eau est d閖 configur.\n"
+"Cliquez sur <Ok> pour conserver votre configuration,\n"
+"ou sur <Annuler> pour reconfigurer votre connexion internet et r閟eau.\n"
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "serial"
-msgstr "s閞ie"
+msgid "Keyboard layout: %s\n"
+msgstr "Type de clavier: %s\n"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Vous pouvez ici choisir si les imprimantes connect閑s cette machine "
+"doivent 阾re accessibles depuis des machines distantes, et quelles machines "
+"pourront y acc閐er."
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Roulette"
+msgid "Maltese (US)"
+msgstr "Maltais (US)"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Generic"
-msgstr "G閚閞ique"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Effectue la connexion ou la d閏onnexion (montage et d閙ontage) vers les "
+"syst鑝es de fichiers distants ou dossiers partag閟 de type NFS (Unix), SMB "
+"(Windows), et NCP (Netware) que vous avez configur閟. (Pour NFS et SMB, voir "
+"le 珷Centre de contr鬺e Mandrake牷, dans la section 珷mat閞iel / points de "
+"montage牷)"
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "Carte TV"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Toggle between normal/expert mode"
+msgstr "Bassculer entre les modes expert et normal"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Souris standard PS2 molette"
+msgid "Size"
+msgstr "Taille"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "GRUB"
+msgstr "GRUB"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "Greenland"
+msgstr "Groenland"
#: ../../mouse.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Souris SUN"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Basculer entre tri alphab閠ique et tri par groupes"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "R閐uire l'arborescence"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "D関elopper l'arborescence"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Information"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Est-ce correct?"
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erreur d'閏riture dans le fichier %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Mauvais fichier de sauvegarde"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restauration impossible depuis le fichier %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Ce n'est pas la bonne bande. Celle-ci s'appelle %s."
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Il y a un espace vide dans la table des partitions mais il est\n"
-"inutilisable. La seule solution est de d閜lacer vos partitions primaires\n"
-"de telle fa鏾n que cet espace soit plac contre les partitions 閠endues."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Les partitions 閠endues ne sont pas support閑 par cette plateforme"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "Le montage a 閏hou闋: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "関entuellement"
+"La configuration du partage de la connexion Internet a d閖 閠閈n"
+"effectu閑. Elle est actuellement activ閑.\n"
+"\n"
+"Que souhaitez-vous faire?"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "nice"
-msgstr "utile"
+msgid "Delete All NBIs"
+msgstr "Effacer toutes les NBI"
-#: ../../pkgs.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "very nice"
-msgstr "tr鑣 utile"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+"Ce dialogue permet de contr鬺er finement le chargeur de d閙arrage :\n"
+"\n"
+" * 珷%s牷 vous propose trois choix :\n"
+"\n"
+" * 珷%s牷 : si vous pr閒閞ez GRUB (menu texte).\n"
+"\n"
+" * 珷%s牷 : si vous pr閒閞ez la version texte de LILO.\n"
+"\n"
+" * 珷%s牷 : si vous pr閒閞ez l'interface graphique.\n"
+"\n"
+" * 珷%s牷: dans la plupart des cas, vous n'aurez pas changer le disque\n"
+"par d閒aut (珷%s牷, mais si vous le d閟irez, le programme d'amorce peut\n"
+"阾re install sur un second disque, 珷%s牷, ou m阭e sur une disquette,\n"
+"珷%s牷.\n"
+"\n"
+" * 珷%s牷: au red閙arrage de l'ordinateur, il s'agit du temps accord 郳n"
+"l'utilisateur pour d閙arrer un autre syst鑝e d'exploitation.\n"
+"\n"
+"!! Prenez garde, si vous d閏idez de ne pas installer de programme d'amorce\n"
+"(en cliquant sur 珷%s牷), vous devez vous assurer d'avoir une m閠hode pour\n"
+"d閙arrer le syst鑝e. Aussi, assurez-vous de bien savoir ce que vous faites\n"
+"si vous modifiez les options. !!\n"
+"\n"
+"En cliquant sur 珷%s牷, vous aurez acc鑣 plusieurs autres options de\n"
+"configuration. Sachez que celles-ci sont r閟erv閑s aux experts en la\n"
+"mati鑢e."
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "important"
-msgstr "important"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"Si rempli, envoie le rapport par courriel cette adresse, sinon root."
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "must have"
-msgstr "obligatoire"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Quelle configuration d'XFree d閟irez-vous utiliser?"
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Trop peu de partitions pour du RAID de niveau %d\n"
+msgid "More"
+msgstr "Davantage"
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "珷mkraid牷 a 閏hou"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Avec ce niveau de s閏urit, l'utilisation de cette machine en tant que\n"
+"serveur devient envisageable. La s閏urisation est suffisamment forte pour\n"
+"accepter les connexions de nombreux clients. Note: si votre machine est\n"
+"seulement connect閑 en tant que client sur Internet, vous devriez plut魌\n"
+"choisir un niveau inf閞ieur."
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "珷mkraid牷 a 閏hou (les 珷raidtools牷 sont-ils install閟?)"
+msgid "Account Password"
+msgstr "Mot de passe du compte"
-#: ../../raid.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-"Impossible d'ajouter une partition au RAID md%d car\n"
-"celui-ci est d閖 format"
+"Vous avez d閏id d'installer le programme d'amor鏰ge sur une partition.\n"
+"Cela implique que vous ayez d閖 un programme d'amor鏰ge sur le disque dur "
+"sur lequel le syst鑝e d閙arre (exemple: System Commander).\n"
+"\n"
+"Quel est le disque de d閙arrage?"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Stop"
-msgstr "Arr阾er"
+msgid "Tajik keyboard"
+msgstr "Tadjik"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Start"
-msgstr "D閙arrer"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Vous pouvez copier la configuration de l'imprimante faite pour le "
+"gestionnaire %s vers votre gestionnaire actuel %s. Toutes les donn閑s de "
+"configuration (nom de l'imprimante, description, emplacement, type de "
+"connexion, et param鑤res par d閒aut) sont r閏up閞閑s, mais les travaux ne "
+"seront pas transf閞閟.\n"
+"Toutes les files d'attente n'ont pas pu 阾re transf閞閑s cause des raisons "
+"suivantes:\n"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "On boot"
-msgstr "Au d閙arrage"
+msgid "Font List"
+msgstr "Liste des polices"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Pas d'autre information au sujet de ce service, d閟ol."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Vous aurez peut-阾re besoin de changer le p閞iph閞ique d'amor鏰ge\n"
+"de l'OpenFirmware pour activer le programme d'amor鏰ge. Si vous\n"
+"ne voyez pas appara顃re l'invite du programme d'amor鏰ge lorsque\n"
+"vous red閙arrerez, appuyez sur Command-Option-O-F au d閙arrage et\n"
+"entrez:\n"
+"setenv boot-device %s,\\\\:tbxi\n"
+"Puis tapez: shut-down\n"
+"Au prochain d閙arrage vous devriez voir appara顃re l'invite du\n"
+"programme d'amor鏰ge."
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Serveurs et services"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Il semble que votre machine ne soit pas dot閑 de l'architecture "
+"珷NewWorld牷.\n"
+"Le programme d'amor鏰ge 珷yaboot牷 ne fonctionnera pas.\n"
+"L'installation va continuer, mais vous aurez besoin de 珷BootX牷 ou\n"
+"d'une autre m閠hode pour d閙arrer votre machine."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "stopped"
-msgstr "arr阾"
+msgid "Select file"
+msgstr "S閘ectionnez un fichier"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "running"
-msgstr "actif"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
+"Choisissez l'h魌e ou le r閟eau partir duquel les imprimantes locales "
+"seront disponibles:"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-"Choisissez les services d閙arrer automatiquement lors du d閙arrage du "
-"syst鑝e"
+"Vous pouvez 間alement utiliser ces commandes dans le champ 珷commande "
+"d'impression牷 des bo顃es de dialogue d'impression dans de nombreuses "
+"applications. Dans ce cas n'indiquez pas le nom du fichier puisqu'il sera "
+"fourni par l'application elle-m阭e.\n"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Database Server"
-msgstr "Serveur de base de donn閑s"
+msgid "Japan"
+msgstr "Japon"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote Administration"
-msgstr "Administration distance"
+msgid "Print option list"
+msgstr "Liste des options d'impression"
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "File sharing"
-msgstr "Partage de fichiers"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
+"Les changements ont 閠 effectu閟 mais ne seront effectifs qu'apr鑣 votre "
+"d閏onnexion"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Internet"
-msgstr "internet"
+msgid "Search servers"
+msgstr "Rechercher les serveurs"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing"
-msgstr "Impression"
+msgid "NCP queue name missing!"
+msgstr "Nom de la file d'attente NCP manquant!"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"D閙arre le serveur de polices de caract鑢es, obligatoire pour le "
-"fonctionnement de l'interface graphique (XFree)"
+"Attention, une autre connexion internet a 閠 d閠ect閑, peut-阾re utilisant "
+"votre r閟eau"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Charger les pilotes pour vos p閞iph閞iques USB."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-Rom 珷%s牷"
#: ../../services.pm:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
-"Syslog est un service utilis par beaucoup d'autres services pour "
-"enregistrer des rapports d'activit. C'est une tr鑣 bonne id閑 de toujours "
-"l'activer."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "D閙arrer le syst鑝e de gestion du son sur votre machine."
+"Sauvegarde et restaure l'entropie du syst鑝e pour une meilleure g閚閞ation "
+"de nombres al閍toires. (utile par exemple pour la cr閍tion de clefs de "
+"cryptographie)"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-"Le protocole rwho permet aux utilisateurs distants d'obtenir une liste des "
-"utilisateurs connect閟 une machine qui fait tourner le d閙on rwho "
-"(similaire finger)."
+"Erreur la v閞ification du syst鑝e de fichiers %s. Souhaitez-vous corriger "
+"les erreurs? (attention, vous pouvez perdre des donn閑s)"
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Le protocole rusers permet aux utilisateurs de conna顃re tous les "
-"utilisateurs connect閟 aux machines supportant ce protocole."
+msgid "Turn your computer into a reliable server"
+msgstr "Transformez votre ordinateur en un serveur fiable"
-#: ../../services.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Le protocole rstat permet aux utilisateurs sur un m阭e r閟eau d'obtenir des "
-"mesures de la performance de n'importe quelle machine sur ce r閟eau."
+msgid " (driver %s)"
+msgstr " (pilote %s)"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-"Le service routed permet la mise jour automatique des tables de routage IP "
-"gr鈉e au protocole RIP. Bien que RIP soit tr鑣 utilis sur les petits "
-"r閟eaux, des protocoles de routage plus complets sont n閏essaires pour les "
-"r閟eaux de plus grande taille. "
+"Fichier(s) de bouclage:\n"
+" %s\n"
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Permet de faire appara顃re des p閞iph閞iques de type bloc (par ex. "
-"partitions de disque dur) comme des p閞iph閞iques bruts acc鑣 direct (raw "
-"devices). Les correspondances sont 閠ablies dans le fichier /etc/sysconfig/"
-"rawdevices, et c'est la commande 珷raw牷 qui est utilis閑. Cela peut 阾re "
-"utilis par des applications comme Oracle ou par des lecteurs de DVD."
+msgid "I don't know"
+msgstr "Je ne sais pas"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sauvegarde et restaure l'entropie du syst鑝e pour une meilleure g閚閞ation "
-"de nombres al閍toires. (utile par exemple pour la cr閍tion de clefs de "
-"cryptographie)"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", h魌e TCP/IP 珷%s牷, port 珷%s牷"
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-"Postfix est un agent de transport du courrier (Mail Transport Agent - MTA) "
-"permettant l'閏hange de courriers 閘ectroniques entre machines."
+"Vous 阾es sur le point de configurer une disquette d'auto-installation. "
+"Cette fonction est relativement dangereuse, et doit donc 阾re utilis閑 avec "
+"pr閏aution.\n"
+"\n"
+"La disquette d'auto-installation vous permettra d'installer un autre "
+"ordinateur avec exactement la m阭e configuration que le v魌re. Mais parmi "
+"l'ensemble des 閠apes d'installation, vous pouvez choisir lesquelles seront "
+"compl鑤ement automatis閑s et lesquelles seront manuelles.\n"
+"Pour une s鹯et maximale, les 閠apes de partitionnement et de formatage ne "
+"seront jamais faites automatiquement, quels que soient les choix que vous "
+"aviez fait lors de la premi鑢e installation de cet ordinateur.\n"
+"\n"
+"Souhaitez-vous continuer?"
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
msgstr ""
-"Le portmapper g鑢e les connexions RPC qui sont utilis閑s par des serveurs "
-"comme NFS et NIS. Le serveur portmap doit 阾re activ sur des machines "
-"jouant le r鬺e de serveur pour des protocoles utilisant le m閏anisme RPC."
+"\n"
+"\n"
+"Votre carte utilise actuellement le pilote %s 珷%s牷 (le pilote par d閒aut "
+"閠ant 珷%s牷)"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA permet d'utiliser des p閞iph閞iques PCCARD comme des cartes Ethernet "
-"ou des modems avec des ordinateurs portables. Ce service ne sera pas d閙arr "
-" moins qu'il soit correctement configur. Il peut donc 阾re activ sans "
-"danger sur des machines ne poss閐ant pas ce type de p閞iph閞iques."
+msgid "Post Uninstall"
+msgstr "Post-d閟installation"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support des imprimantes winprinter OKI 4w et compatibles."
+msgid " ("
+msgstr " ("
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activation de la touche 珷Verr Num牷 du pav num閞ique du clavier au "
-"d閙arrage."
+msgid "Cpuid level"
+msgstr "Niveau CPUID"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ce service permet le d閙arrage des fonctions de verrouillage des fichiers "
-"pour NFS, lorsque le noyau ne les a pas d閙arr閑s lui-m阭e. Cela dit les "
-"noyaux r閏ents n'en ont pas besoin. Cependant, le service statd est aussi "
-"d閙arr et sert avertir les clients distants de l'arr阾 du serveur NFS."
+msgid "Mongolian (cyrillic)"
+msgstr "Mongolien (cyrillique)"
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"D閙arrage ou arr阾 du serveur NFS. Un serveur NFS permet d'effectuer un "
-"partage de fichiers en ouvrant l'acc鑣 certains dossiers depuis un r閟eau. "
-"Les dossiers partag閟 sont list閟 dans le fichier /etc/exports, mais vous "
-"pouvez l'閐iter gr鈉e 珷linuxconf牷 dans la section 珷r閟eau / serveur牷."
+msgid "Add a module"
+msgstr "Ajouter un module"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Gestion group閑 de toutes les connexions r閟eau que vous avez configur閑s et "
-"que vous avez choisi d'activer d鑣 le d閙arrage du syst鑝e. (par ex. vos "
-"connexions pour le r閟eau local et l'ADSL ou le C鈈le). Vous pouvez acc閐er "
-"s閜ar閙ent vos interfaces r閟eau gr鈉e au 珷Centre de Contr鬺e Mandrake牷 "
-"dans la section 珷Internet et r閟eau牷."
+msgid "Profile to delete:"
+msgstr "Profil effacer:"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Effectue la connexion ou la d閏onnexion (montage et d閙ontage) vers les "
-"syst鑝es de fichiers distants ou dossiers partag閟 de type NFS (Unix), SMB "
-"(Windows), et NCP (Netware) que vous avez configur閟. (Pour NFS et SMB, voir "
-"le 珷Centre de contr鬺e Mandrake牷, dans la section 珷mat閞iel / points de "
-"montage牷)"
+msgid "Local measure"
+msgstr "Mesure locale"
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) est un Serveur de Noms de Domaine (DNS) qui est utilis pour "
-"convertir les adresses internet en adresses IP. (Il est principalement mis "
-"en place par les fournisseur d'acc鑣)"
+msgid "busmouse"
+msgstr "souris bus"
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Activation / d閟activation du Linux Virtual Server, qui est un service "
-"utilis pour cr閑r un serveur virtuel haute-performance et haute "
-"disponibilit, compos d'un ensemble de serveur linux reli閟 entre eux."
+msgid "Account Login (user name)"
+msgstr "Nom d'utilisateur du compte"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd est le serveur d'impression n閏essaire au bon fonctionnement de la "
-"commande lpr. Il permet g閞er les files d'attente et les demandes "
-"d'impression."
+msgid "Fdiv bug"
+msgstr "Bogue de l'instruction FDIV"
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"Linuxconf effectue certaines t鈉hes au d閙arrage afin de maintenir la "
-"configuration du syst鑝e."
+"configuration drakfirewall\n"
+"\n"
+"Assurez-vous d'avoir configur le r閟eau et Internet gr鈉e 郳n"
+"drakconnect avant d'aller plus loin."
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "D閠ection automatique et configuration du mat閞iel au d閙arrage."
+msgid "Benin"
+msgstr "B閚in"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"R間閚閞ation automatique des fichiers d'en-t阾es pour le noyau\n"
-"dans le dossier /boot pour /usr/include/linux/{autoconf,version}.h"
+msgid "Uruguay"
+msgstr "Uruguay"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ce paquetage active la disposition de clavier d閒ini dans le fichier /etc/"
-"sysconfig/keyboard. Cette disposition peut 阾re modifi閑 en utilisant "
-"l'outil kbdconfig. Ce service devrait 阾re activ sur la plupart des "
-"machines."
+msgid "Path selection"
+msgstr "S閘ection du chemin"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"D閙arre le filtrage des paquets r閟eau pour la s閞ie 2.2 des noyaux Linux, "
-"afin de mettre en place un pare-feu (firewall) pour prot間er votre machine "
-"des attaques r閟eau. "
+msgid "Name/IP address of host:"
+msgstr "Nom ou Adresse IP de l'h魌e:"
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Le m閠aserveur 珷inetd牷 sert d閙arrer automatiquement les autres serveurs "
-"r閟eau lorsqu'une requ阾e est d閠ect閑. Il est notamment responsable du "
-"d閙arrage des serveurs telnet, ftp, rsh et rlogin, etc. Le d閟activer "
-"revient d閟activer tous les services qu'il g鑢e."
+msgid "Monitor: %s\n"
+msgstr "Moniteur: %s\n"
-#: ../../services.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
-"Apache est un serveur Web (HTTP). Il est utilis pour faire fonctionner un "
-"site internet."
+"Votre disque dur semble avoir un probl鑝e mat閞iel:\n"
+"un test pour v閞ifier son aptitude conserver l'int間rit des donn閑s a "
+"閏hou.\n"
+"Cela signifie que serez victime de pertes al閍toires de donn閑s."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake effectue une d閠ection mat閞ielle, et configure 関entuellement le "
-"nouveau mat閞iel."
+msgid "Printer host name or IP missing!"
+msgstr "Nom d'h魌e de l'imprimante ou adresse IP manquant(e)!"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM permet d'utiliser la souris dans des applications fonctionnant en mode "
-"texte dans la console (comme par exemple Midnight Commander). Il permet "
-"間alement d'utiliser le copier-coller et inclut le support des menus "
-"contextuels sur la console."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Veuillez cocher tous les comptes utilisateurs sauvegarder"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
msgstr ""
-"Cron est un planificateur de t鈉hes. Contrairement Anacron, les t鈉hes "
-"sont ex閏ut閑s des moments pr閏is, pendant lesquels la machine doit 阾re "
-"allum閑. 珷Vixie cron牷 ajoute des fonctions au 珷cron牷 UNIX de base "
-"(notamment une meilleure s閏urit et des options de configuration plus "
-"compl鑤es)."
+"%s doit 阾re configur閑 par printerdrake.\n"
+"Vous pouvez lancer printerdrake depuis le Centre de Contr鬺e Mandrake dans "
+"la section Mat閞iel"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Service qui permet de d閙arrer une t鈉he une heure pr閏ise. Chaque t鈉he "
-"doit 阾re cr殚e par la commande 珷at牷, puis, a l'heure dite, le service "
-"珷atd牷 lance cette t鈉he. Par exemple pour 閠eindre automatiquement la "
-"machine ce soir 23h59, tapez 珷at 23:59牷 dans une fen阾re de commande, "
-"puis 珷halt牷 et <Ctrl-D>."
+msgid "Bangladesh"
+msgstr "Bangladesh"
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd surveille l'閠at de la batterie d'un portable, et en garde une trace "
-"(via syslog). Il peut 阾re utilis pour arr阾er proprement la machine "
-"lorsque la batterie est tr鑣 faible et apr鑣 avoir averti les utilisateurs."
+msgid "Japan (cable)"
+msgstr "Japon (c鈈le)"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-"Anacron ex閏ute des t鈉hes p閞iodiques avec une pr閏ision exprim閑 en jours. "
-"Les t鈉hes sont ex閏ut閑s automatiquement au red閙arrage de la machine si "
-"elles ont expir閟 leur d閘ai. Quelques t鈉hes de maintenance quotidiennes et "
-"hebdomadaires sont pr閏onfigur閑s pour le syst鑝e Mandrake.(Plus d'infos "
-"dans 珷man anacron牷)"
+"\n"
+"Bienvenue dans l'assistant de configuration d'imprimante\n"
+"\n"
+"Cet assistant vous aidera installer les imprimantes connect閑s soit cet "
+"ordinateur, soit directement au r閟eau, soit sur un ordinateur distant sous "
+"Windows.\n"
+"\n"
+"Si vous avez des imprimantes branch閑s sur cet ordinateur, veuillez les "
+"allumer afin qu'elles soient d閠ect閑s automatiquement. Les imprimantes "
+"r閟eau et les imprimantes sous Windows doivent aussi 阾re allum閑s et "
+"reli閑s.\n"
+"\n"
+"Notez que les autod閠ections des imprimantes r閟eau ou Windows sont plus "
+"longues que celle des imprimantes locales, donc vous pouvez les d閟activer "
+"si vous n'en avez pas besoin.\n"
+"\n"
+"Cliquez sur 珷suivant牷 quand vous 阾es pr阾, ou sur 珷annuler牷 si vous ne "
+"voulez pas configurer d'imprimante maintenant."
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"D閙arrage ou arr阾 du syst鑝e sonore ALSA (Advanced Linux Sound "
-"Architecture) Il charge le pilote pour votre carte son, et restaure les "
-"r間lages du p閞iph閞ique de mixage."
+msgid "Initial tests"
+msgstr "Tests initiaux"
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "Installation des paquetages..."
+msgid "Continue"
+msgstr "Continuer"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Utilisation: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Custom Restore"
+msgstr "Restauration personnalis閑..."
-#: ../../standalone.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+"珷%s牷 : si une carte son a 閠 d閠ect閑, elle appara顃ra ici. Si vous\n"
+"remarquez que la carte configur閑 n'est pas celle qui se trouve\n"
+"effectivement sur votre syst鑝e, vous pouvez cliquer sur le bouton pour en\n"
+"choisir une autre."
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=dossier_source_sane] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Script-based"
+msgstr "Bas閑 sur un script"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-" --no-confirmation ne demande pas la premi鑢e confirmation en mode "
-"MandrakeUpdate\n"
-" --no-verify-rpm ne v閞ifie pas les signatures des paquetages\n"
-" --changelog-first affiche le changelog avant la liste des fichiers "
-"dans la fen阾re de description\n"
-" --merge-all-rpmnew propose de fusionner tous les fichiers .rpmnew/."
-"rpmsave trouv閟"
+msgid "Error reading file %s"
+msgstr "Erreur lors de la lecture du fichier %s"
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "R間lage de la BVP (PLL)"
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Application de surveillance et de connexion r閟eau et internet\n"
-"\n"
-"--defaultintf interface : montre cette interface par d閒aut\n"
-"--connect : se connecte Internet (si non connect)\n"
-"--disconnect : se d閏onnecte d'Internet (si connect)\n"
-"--force : utilis avec l'option (dis)connect : force la (d)connexion.\n"
-"--status : retourne 1 si connect, 0 sinon, puis quitte.\n"
-"--quiet : non interactif. utiliser avec l'option (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Vous devez disposer d'une partition FAT mont閑 en /boot/efi"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=monfichier] [--word=monmot] [--explain=regexp] [--alert]"
+msgid " on "
+msgstr " sur"
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[keyboard]"
+msgid "The URL must begin with http:// or https://"
+msgstr "L'URL doit commencer par http:// ou https://"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-"[OPTIONS]...\n"
-"Configurateur pour Mandrake Terminal Server\n"
-"--enable : active MTS\n"
-"--disable : d閟active MTS\n"
-"--start : d閙arre MTS\n"
-"--stop : arr阾e MTS\n"
-"--adduser : ajoute un utilisateur syst鑝e existant au MTS (n閏essite "
-"un nom d'utilisateur)\n"
-"--deluser : enl鑦e un utilisateur syst鑝e existant du MTS (n閏essite "
-"un nom d'utilisateur)\n"
-"--addclient : ajoute une machine cliente au MTS (n閏essite une adresse "
-"MAC, IP, nom d'image nbi)\n"
-"--delclient : enl鑦e une machine cliente au MTS (n閏essite une adresse "
-"MAC, IP, nom d'image nbi)"
+"Si vous la connaissez, vous pouvez sp閏ifier directement l'adresse r閟eau "
+"(URL) qui permet d'acc閐er l'imprimante. Choisissez un en-t阾e puis "
+"compl閠ez l'adresse en respectant les sp閏ifications CUPS ou Foomatic. Notez "
+"que tous les types d'URL ne sont pas support閟 par tous les gestionnaires "
+"d'impression."
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-msgstr ""
-"Application de gestion et d'importation de polices de "
-"carat鑢es \n"
-"--windows_import : importe partir de toutes les partitions Windows "
-"disponibles.\n"
-"--xls_fonts : montre toutes les polices d閖 existante par xls\n"
-"--strong : v閞ification forte de la fonte.\n"
-"--install : accepte tout fichier et tout dossier pour les polices.\n"
-"--uninstall : d閟installe toute police ou tout dossier pour les "
-"polices.\n"
-"--replace : remplace les polices existantes\n"
-"--application : 0 : aucune application.\n"
-" : 1 : toute application disponible support閑.\n"
-" : nom_application : pour par exemple staroffice, \n"
-" : ou gs pour ghostscript (pour 1 appli)."
+msgid "Other OS (SunOS...)"
+msgstr "Autres syst鑝es (SunOS, etc.)"
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONS] [NOM_PROGRAMME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - affiche ce message.\n"
-" --report - le programme doit 阾re un outil mandrake\n"
-" --incident - le programme doit 阾re un outil mandrake"
+msgid "Install/Upgrade"
+msgstr "Installation/Mise jour"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paquetages"
#: ../../standalone.pm:1
#, c-format
@@ -7594,4939 +6999,5390 @@ msgstr ""
"--help : affiche ce message.\n"
"--version : affiche le num閞o de version.\n"
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Domaine d'authentification n閏essaire"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Ce programme est un logiciel libre: vous pouvez le redistribuer\n"
-"et/ou le modifier selon les termes de la 珷GNU General Public\n"
-"License牷, tels que publi閟 par la 珷Free Software Foundation牷; soit\n"
-"la version 2 de cette licence ou (selon votre choix) toute version\n"
-"ult閞ieure.\n"
"\n"
-"Ce programme est distribu dans l'espoir qu'il sera utile, mais\n"
-"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans m阭e les\n"
-"garanties de commercialisation ou d'adaptation dans un but sp閏ifique.\n"
-"Se r閒閞er la 珷GNU General Public License牷 pour plus de d閠ails.\n"
"\n"
-"Vous devriez avoir re鐄 une copie de la 珷GNU General Public License牷\n"
-"en m阭e temps que ce programme; sinon, 閏rivez la 珷Free Software\n"
-"Foundation牷, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, "
-"USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Fin de l'installation"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "Installer les mises jour"
+" Remerciements:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Configuration des services"
+msgid "Costa Rica"
+msgstr "Costa Rica"
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Configuration de X"
+msgid "Use libsafe for servers"
+msgstr "Utilisation de 珷libsafe牷 pour les serveurs"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Programme d'amor鏰ge"
+msgid "Icelandic"
+msgstr "Islandais"
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Configure networking"
-msgstr "Configuration du r閟eau"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Utilisation: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Add a user"
-msgstr "Ajout des utilisateurs"
+msgid "Please relog into %s to activate the changes"
+msgstr "Veuillez relancer %s pour activer les changements"
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "Root password"
-msgstr "Mot de passe root"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Install system"
-msgstr "Installation du syst鑝e"
+msgid "Lilo/grub mode"
+msgstr "Menu d'amor鏰ge"
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Choix des paquetages"
+msgid "Output"
+msgstr "Sortie"
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Formatage des partitions"
+msgid "Circular mounts %s\n"
+msgstr "Points de montage circulaires %s\n"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "Partitionnement"
+msgid "Martinique"
+msgstr "Martinique"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Choix du clavier"
+msgid "HardDrive / NFS"
+msgstr "Dans un dossier (local ou partag)..."
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Classe d'installation"
+msgid "a number"
+msgstr "un nombre"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "D閠ection des disques durs"
+msgid "Swedish"
+msgstr "Su閐ois"
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Configuration de la souris"
+msgid "Which %s driver should I try?"
+msgstr "Quel pilote %s faut-il essayer?"
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "License"
-msgstr "Licence"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
+"Vous recevrez une alerte si l'un des services s閘ectionn閟 ne tourne plus"
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Language"
-msgstr "Choix de la langue"
+msgid "Filesystem types:"
+msgstr "Types des syst鑝es de fichiers:"
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", p閞iph閞ique HP JetDirect multifonction"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Northern Mariana Islands"
+msgstr "蝜es Mariannes du Nord"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "aucun"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "utilisateur:"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (pilote d'affichage pour l'installation)"
+msgid "Please enter your password"
+msgstr "Veuillez entrer votre mot de passe"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle en utilisant\n"
-"XFree %s.\n"
-"Veuillez noter que ce support est EXP蒖IMENTAL et qu'il peut BLOQUER VOTRE\n"
-"ORDINATEUR."
+"Nom du profil cr閑r (le nouveau profil est cr殚 comme une copie du profil "
+"courant:"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avec support EXP蒖IMENTAL de l'acc閘閞ation 3D mat閞ielle"
+msgid "Floppy"
+msgstr "Lecteur de disquette"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgid "Please check if you want to erase your RW media (1st Session)"
msgstr ""
-"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle avec XFree %s."
-
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avec acc閘閞ation 3D mat閞ielle"
+"V閞ifiez si vous voulez effacer votre support r閕nscriptible (1ere session)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Attention, veuillez noter que ce support est EXP蒖IMENTAL et peut BLOQUER\n"
-"VOTRE ORDINATEUR.\n"
-"\n"
-"Votre carte vid閛 est support閑 par XFree %s. Ce dernier peut 阾re plus\n"
-"performant en 2D."
+msgid "Ghostscript referencing"
+msgstr "Inscription dans ghostscript"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Votre carte vid閛 est support閑 par XFree %s. Ce dernier peut 阾re plus\n"
-"performant en 2D."
+msgid "Bootloader"
+msgstr "Programme d'amor鏰ge"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Move"
+msgstr "D閜lacer"
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Configurer seulement la carte 珷%s牷 %s"
+msgid "Bootloader to use"
+msgstr "Programme d'amor鏰ge utiliser"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Xinerama extension"
-msgstr "R閜artir l'affichage sur plusieurs 閏rans (Xinerama)"
+msgid "SMB server host"
+msgstr "Nom du serveur"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Configurer les 閏rans s閜ar閙ent"
+msgid "Name Servers:"
+msgstr "Serveurs de nom:"
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quelle configuration d'XFree d閟irez-vous utiliser?"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Important\n"
+"\n"
+"Veuillez lire attentivement le pr閟ent document. En cas de d閟accord \n"
+"avec l'un de ses termes vous n'阾es pas autoris installer les CD-Rom\n"
+"suivants. Dans ce cas, cliquez sur 珷Refuser牷 pour continuer \n"
+"l'installation sans ces m閐ias.\n"
+"\n"
+"Certains composants logiciels contenus dans les prochains CD-Rom \n"
+"ne sont pas soumis aux licences GPL ou similaires permettant la copie, \n"
+"la modification ou la redistribution. Chacun de ces composants logiciels \n"
+"est distribu sous les termes et conditions d'un accord de licence qui \n"
+"lui est propre. Veuillez vous y r閒閞er et vous y soumettre avant de les \n"
+"installer ou de les redistribuer. G閚閞alement, ces licences n'autorisent\n"
+"pas la copie (autre qu' titre de sauvegarde), la redistribution, \n"
+"la d閏ompilation, la d閟assemblage, l'ing閚ierie inverse ni la modification "
+"des\n"
+"Logiciels auxquels elles s'appliquent. Toute violation d'un des termes de la "
+"licence applicable entra頽e g閚閞alement sa\n"
+"r閟iliation, sans pr閖udice de tous autres droits ou actions votre "
+"encontre.\n"
+" moins que l'accord de licence ne vous l'y autorise, vous ne pouvez pas \n"
+"installer ces Logiciels sur plus d'une machine ni adapter les Logiciels \n"
+"pour une utilisation en r閟eau. Le cas 閏h閍nt, veuillez contacter le \n"
+"distributeur du programme pour acqu閞ir des licences additionnelles.\n"
+"La distribution des tiers de copies des Logiciels ou de la documentation\n"
+"qui les accompagne est g閚閞alement interdite.\n"
+"\n"
+"Tous les droits, titres et int閞阾 de ces Logiciels sont la propri閠 \n"
+"exclusive de leurs auteurs respectifs et sont prot間閟 au titre des \n"
+"droits de propri閠 intellectuelle et de copyright applicables aux "
+"logiciels.\n"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Configuration d'XFree"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Retirer cette imprimante de StarOffice/OpenOffice"
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"Veuillez pr閏iser la quantit de m閙oire vid閛 de votre carte graphique"
+"Activation / d閟activation du Linux Virtual Server, qui est un service "
+"utilis pour cr閑r un serveur virtuel haute-performance et haute "
+"disponibilit, compos d'un ensemble de serveur linux reli閟 entre eux."
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Votre syst鑝e peut utiliser simultan閙ent plusieurs 閏rans.\n"
-"Que souhaitez-vous faire?"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milliards de couleurs (32 bits)"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Configuration multi-閏rans"
+msgid "Micronesia"
+msgstr "Micron閟ie"
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "Choisissez un serveur d'affichage (serveur XFree)"
+msgid "License"
+msgstr "Licence"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "X server"
-msgstr "serveur XFree"
+msgid "This may take a moment to generate the keys."
+msgstr "G閚閞er les clefs peut prendre un moment."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 Mo ou plus"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Autod閠ection d'imprimante (locale, r閟eau, et SMB)"
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 Mo"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem USB (avec pppoa)"
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 Mo"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Une erreur est survenue: aucun p閞iph閞ique valide n'a 閠 trouv pour\n"
+"cr閑r de nouvelles partitions. Veuillez v閞ifier votre mat閞iel."
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 Mo"
+msgid "Starting the printing system at boot time"
+msgstr "Activation du syst鑝e d'impression au d閙arrage"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 Mo"
+msgid "Do you want to start the connection at boot?"
+msgstr "D閟irez-vous activer la connexion lors du d閙arrage?"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "2 MB"
-msgstr "2 Mo"
+msgid "Processor ID"
+msgstr "Identifiant du processeur"
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 Mo"
+msgid "Sound trouble shooting"
+msgstr "R閟olution d'un probl鑝e de son"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 ko"
+msgid "Polish (qwerty layout)"
+msgstr "Polonais (QWERTY)"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "256 kB"
-msgstr "256 ko"
+msgid "activate now"
+msgstr "activer maintenant"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"D閟irez-vous conserver les changements?\n"
-"La configuration actuelle est:\n"
"\n"
-"%s"
+"activit閟 de Drakbackup par CD:\n"
+"\n"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Options"
-msgstr "Options"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"Vous 阾es sur le point d'installer le syst鑝e d'impression %s sur un syst鑝e "
+"dont le niveau de s閏urit est r間l sur 珷%s牷.\n"
+"\n"
+"Ce syst鑝e d'impression 閏oute en permanence le r閟eau afin de r閜ondre aux "
+"requ阾es d'impression. Ceci se fait gr鈉e un service qui tourne en t鈉he "
+"de fond (daemon) et qui est accessible par les autres machines du r閟eau. "
+"C'est donc une cible possible pour des attaques r閟eau 関entuelles. C'est "
+"pourquoi le minimum possible de 珷daemons牷 doivent 阾re d閙arr閟 dans ce "
+"niveau de s閏urit.\n"
+"\n"
+"Souhaitez-vous r閑llement installer un syst鑝e d'impression?"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "Test"
+msgid "Host \"%s\", port %s"
+msgstr "H魌e 珷%s牷, port 珷%s牷"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolution"
-msgstr "R閟olution"
+msgid "This partition can't be used for loopback"
+msgstr "Cette partition ne peut pas 阾re utilis閑 pour du bouclage"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Monitor"
-msgstr "Moniteur"
+msgid "File already exists. Use it?"
+msgstr "Le fichier existe d閖. Faut-il l'utiliser?"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Graphic Card"
-msgstr "Carte graphique"
+msgid "received: "
+msgstr "re鐄s: "
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Fr閝uence verticale"
+msgid "Right Alt key"
+msgstr "Touche Alt droite"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Fr閝uence horizontale"
+msgid "the list of alternative drivers for this sound card"
+msgstr "list des autres pilotes pour cette carte son"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deux param鑤res importants sont la fr閝uence de rafra頲hissement\n"
-"verticale (qui d閠ermine la vitesse laquelle l'閏ran est rafra頲hi)\n"
-"et, surtout, la fr閝uence de synchronisation horizontale (qui d閠ermine\n"
-"la vitesse laquelle les lignes sont trac閑s).\n"
-"\n"
-"Il ne faut SURTOUT PAS choisir un type de moniteur ayant\n"
-"une fr閝uence de rafra頲hissement exc閐ant les capacit閟 de votre\n"
-"moniteur. Vous risqueriez de l'endommager.\n"
-"En cas de doute, choisissez un r間lage moins performant mais\n"
-"sans risque pour votre mat閞iel."
+msgid "Gateway"
+msgstr "Passerelle"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "蒫hec de l'interrogation 珷Plug'n Play牷. Veuillez choisir un moniteur"
+msgid "Scanner sharing"
+msgstr "Partage de scanners"
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Vendor"
-msgstr "Vendeur"
+msgid "Tonga"
+msgstr "Tonga"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "Tunisie"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Choisissez un moniteur"
+msgid "Profile: "
+msgstr "Profil: "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Carte graphique: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
+"Cliquez sur un p閞iph閞ique dans l'arborescence afin de consulter les "
+"informations correspondantes."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Choix de la r閟olution et du nombre de couleurs"
+msgid "XawTV isn't installed!"
+msgstr "XawTV n'est pas install闋!"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Resolutions"
-msgstr "R閟olutions"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Cr閑r/Transf閞er\n"
+"les cl閟 de sauvegardes pour SSH."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliards de couleurs (32 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Ne pas inclure les fichiers critiques (passwd, group, fstab)"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 millions de couleurs (24 bits)"
+msgid "old static device name used in dev package"
+msgstr "ancien nom de p閞iph閞ique statique utilis dans le paquetage dev"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mille couleurs (16 bits)"
+msgid "This label is already used"
+msgstr "Ce label est d閖 utilis"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mille couleurs (15 bits)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Bienvenue dans l'assistant de configuration d'imprimante\n"
+"\n"
+"Cet assistant vous aidera installer les imprimantes connect閑s soit cet "
+"ordinateur, soit directement au r閟eau.\n"
+"\n"
+"Si vous avez des imprimantes branch閑s sur cet ordinateur, veuillez les "
+"allumer afin qu'elles soient d閠ect閑s automatiquement. Les imprimantes "
+"r閟eau doivent aussi 阾re allum閑s.\n"
+"\n"
+"Notez que l'autod閠ection des imprimantes r閟eau est plus longue que celle "
+"des imprimantes locales, donc vous pouvez la d閟activer si vous n'en avez "
+"pas besoin.\n"
+"\n"
+"Cliquez sur 珷suivant牷 quand vous 阾es pr阾, ou sur 珷annuler牷 si vous ne "
+"voulez pas configurer d'imprimante maintenant."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 couleurs (8 bits)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"Apr鑣 avoir format la partition %s, toutes les donn閑s pr閟entes\n"
+"sur cette partition seront perdues."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Is this the correct setting?"
-msgstr "La configuration est-elle correcte?"
+msgid "Connection Time: "
+msgstr "Temps de connexion: "
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Fin dans %d secondes"
+msgid "select perm file to see/edit"
+msgstr "choisissez un fichier de permissions voir/modifier"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"Une erreur est survenue:\n"
-"%s\n"
-"Essayez de changer les param鑤res"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attention: tester cette carte vid閛 peut bloquer votre ordinateur"
+"Changement de CD-Rom\n"
+"\n"
+"Veuillez ins閞er le CD-Rom d'installation dans votre lecteur.\n"
+"Ceci fait, cliquez sur 珷OK牷.\n"
+"\n"
+"Si vous ne le poss閐ez pas, cliquez sur 珷Annuler牷 pour annuler la mise "
+"jour."
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "D閟irez-vous tester la configuration?"
+msgid "Use group id for execution"
+msgstr "Utiliser l'id du groupe lors de l'ex閏ution"
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "Test de la configuration"
+msgid "Choose the default user:"
+msgstr "Choisissez l'utilisateur par d閒aut:"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "What norm is your TV using?"
-msgstr "Quelle norme utilise votre t閘関iseur?"
+msgid "Gabon"
+msgstr "Gabon"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"Votre carte graphique semble avoir un connecteur TV-OUT.\n"
-"Elle peut 阾re configur閑 pour fonctionner avec le 珷frame-buffer牷.\n"
"\n"
-"Pour cela vous devez connecter votre carte graphique votre TV avant de "
-"d閙arrer votre ordinateur.\n"
-"Ensuite choisissez l'option 珷TVout牷 dans le menu d'amor鏰ge\n"
-"\n"
-"Avez-vous cette fonction?"
+"Les imprimantes connect閑s un serveur CUPS distant n'ont pas besoin d'阾re "
+"configur閑s ici; elles seront automatiquement d閠ect閑s."
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"Souhaitez-vous que l'interface graphique soit\n"
-"automatiquement lanc閑 lors du d閙arrage?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Interface graphique lors du d閙arrage"
+"Vous pouvez choisir d'autres langues.\n"
+"Elles seront disponibles apr鑣 l'installation."
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Pilote XFree86: %s\n"
+msgid "Domain"
+msgstr "Domaine"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serveur XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Pr閏isez la taille m閙oire si n閏essaire (%d燤o trouv閟)"
-#: ../../Xconfig/various.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "R閟olution: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
+"LILO et grub sont deux programmes d'amorce pour GNU/Linux. Cette 閠ape est\n"
+"normalement compl鑤ement automatique. En fait, DrakX analyse le secteur de\n"
+"d閙arrage (珷master boot record牷) et agit en fonction de ce qu'il peut y\n"
+"lire :\n"
+"\n"
+" * Si un secteur de d閙arrage Windows est d閠ect, il sera remplac par\n"
+"grub/LILO. Donc, vous serez capable de d閙arrer GNU/Linux et tout autre\n"
+"syst鑝e d'exploitation.\n"
+"\n"
+" * si grub ou LILO est d閠ect, il sera remplac par la nouvelle version;\n"
+"\n"
+"En cas de doute, DrakX affiche diff閞entes options."
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Nombre de couleurs: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "2鑝e DNS du fournisseur (optionnel)"
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "M閙oire vid閛: %s爇o\n"
+msgid "Boot device"
+msgstr "P閞iph閞ique d'amor鏰ge"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Carte graphique: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Quelle partition d閟irez-vous redimensionner?"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Fr閝uence verticale: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "蝜es mineures des 蓆ats-Unis d'Am閞ique"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Fr閝uence horizontale: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "Un outil pour voir vos fichiers journaux"
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Moniteur: %s\n"
+msgid "Djibouti"
+msgstr "Djibouti"
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "P閞iph閞ique: %s\n"
+msgid "detected on port %s"
+msgstr "d閠ect sur le port %s"
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type de souris: %s\n"
+msgid "LPD"
+msgstr "LPD"
#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Type de clavier: %s\n"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Options: %s"
-msgstr "Options: %s"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "Point de montage: "
+msgid "Graphics card: %s\n"
+msgstr "Carte graphique: %s\n"
-#: ../../diskdrake/dav.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Server: "
-msgstr "Serveur: "
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "L'URL doit commencer par http:// ou https://"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "V閞ifier que vous utilisez bien un DVDRAM"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Entrez l'adresse du serveur WebDAV"
+msgid "Splash selection"
+msgstr "S閘ection de l'image"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Mount point"
-msgstr "Point de montage"
+msgid "Extended partition not supported on this platform"
+msgstr "Les partitions 閠endues ne sont pas support閑 par cette plateforme"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Server"
-msgstr "Serveur"
+msgid "ISDN Configuration"
+msgstr "Configuration RNIS/ISDN"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mount"
-msgstr "Monter"
+msgid "high"
+msgstr "閘ev"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Unmount"
-msgstr "D閙onter"
+msgid "Internet Connection Sharing"
+msgstr "Partage de la connexion internet"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New"
-msgstr "Nouveau"
+msgid "Choose file"
+msgstr "Choisir le fichier"
-#: ../../diskdrake/dav.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-"WebDAV est un protocole qui vous permet de monter localement un dossier\n"
-"de serveur web, et de le traiter comme un syst鑝e de fichiers local ( "
-"condition\n"
-"que le serveur web soit configur en serveur WebDAV). Si vous voulez "
-"ajouter\n"
-"des points de montage WebDAV choisissez 珷Nouveau牷."
+"Attention! Une configuration existante du Pare-Feu a 閠 d閠ect閑. Vous "
+"devrez peut-阾re modifier la configuration manuellement apr鑣 l'installation."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilisez plut魌 珷%s牷"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Impression/Acc鑣 aux cartes photos sur 珷%s牷"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Type"
-msgstr "Type"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Souhaitez-vous permettre l'impression sur les imprimantes ci-dessus ou sur "
+"celles du r閟eau local?\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Cliquez d'abord sur 珷D閙onter牷"
+msgid "Printer default settings"
+msgstr "Param鑤res par d閒aut de l'imprimante"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Delete"
-msgstr "Supprimer"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Souris standard PS2 molette"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Cr閑r"
+msgid "Removing old printer \"%s\"..."
+msgstr "D閟installation de l'ancienne imprimante 珷%s牷..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Types des syst鑝es de fichiers:"
+msgid "Select a device !"
+msgstr "S閘ectionnez un p閞iph閞ique!"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "Vide"
+msgid "Remove selected server"
+msgstr "Supprimer le serveur s閘ectionn"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "French Southern Territories"
+msgstr "Terres Australes Fran鏰ises"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "the vendor name of the processor"
+msgstr "le nom du vendeur de ce processeur"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "All data on this partition should be backed-up"
+msgstr ""
+"Toutes les donn閑s pr閟entes sur cette partition\n"
+"devraient avoir 閠 sauvegard閑s."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "Installing package %s"
+msgstr "Installation du paquetage %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "SF journalis"
+msgid "Checking device and configuring HPOJ..."
+msgstr "V閞ification du p閞iph閞ique et configuration de HPOJ..."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Pour pouvoir utiliser plus de partitions, vous devez d'abord en supprimer "
+"une pour la remplacer par une partition 閠endue."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "Aucun disque dur trouv"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"Votre imprimante HP a 閠 configur閑 automatiquement pour vous donner acc鑣 "
+"aux lecteurs de carte m閙oire partir de votre PC. Maintenant vous pouvez "
+"acc閐er vos cartes en utilisant le programme graphique "
+"珷MtoolsFM牷 (Menu: 珷Applications牷 -> 珷Outils fichiers牷 -> "
+"珷gestionnaire de fichiers MTools牷) ou le programme en ligne de commande "
+"mtools (tapez 珷man mtools牷 pour plus d'infos). Vous acc閐erez la carte "
+"par le lecteur ayant la lettre 珷p:牷, ou une autre lettre si vous avez plus "
+"d'un appareil de ce type. Dans 珷MtoolsFM牷 vous pouvez commuter entre "
+"plusieurs lecteurs gr鈉e au champ situ dans le coin sup閞ieur droit de la "
+"liste de fichiers."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Veuillez cliquer sur une partition"
+msgid "Choose packages to install"
+msgstr "Choix des paquetages"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-"Votre disque poss鑔e une seule grosse partition Windows.\n"
-"Vous devriez la r閐uire pour pouvoir cr閑r d'autres partitions:\n"
-"cliquez sur la partition puis sur 珷Redimensionner牷."
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Choisissez une action"
+"\n"
+" Certaines erreurs lors de l'envoi de courriels peuvent 阾re caus閑s par\n"
+" une mauvaise configuration de postfix. Pour le r閟oudre, vous devez\n"
+" configurer le nom de machine ou de domaine dans /etc/postfix/main.cf.\n"
+"\n"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Assistant"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"TOUTES les partitions et les donn閑s pr閟entes sur le disque %s seront "
+"perdues"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-"Si vous voulez utiliser 珷aboot牷, vous devez r閟erver\n"
-"un espace libre (d'au moins 2048 secteurs) au d閎ut du disque."
+"Votre syst鑝e ne dispose pas d'assez d'espace libre pour l'installation ou "
+"la mise jour (%d > %d)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please make a backup of your data first"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-"Avant d'utiliser un logiciel de partitionnement de disques,\n"
-"il est prudent de faire une copie de sauvegarde de vos donn閑s!!"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read carefully!"
-msgstr "MISE EN GARDE"
+"Toute imprimante a besoin d'un nom (par exemple 珷lpr牷) auquel on se r閒鑢e "
+"pour pouvoir imprimer.\n"
+"Les champs 珷Description牷 et 珷Emplacement牷 n'ont pas besoin d'阾re "
+"remplis. Ce sont de simples commentaires pour les utilisateurs."
-#: ../../diskdrake/interactive.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "Clef de chiffrement (confirmation)"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"珷%s牷: en cliquant sur 珷%s牷, l'outil de configuration d'impression sera\n"
+"d閙arr. Consultez le chapitre correspondant du 珷Guide de d閙arrage牷 pour\n"
+"plus de renseignements. L'interface qui y est document閑 est similaire 郳n"
+"celle rencontr閑 lors de l'installation."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "Clef de chiffrement"
+msgid "Bhutan"
+msgstr "Bhoutan"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "Les clefs de chiffrement ne correspondent pas"
+msgid "Network interface"
+msgstr "Carte r閟eau"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Cette clef de chiffrement est trop courte (minimum %d caract鑢es)"
+msgid "Reading printer data..."
+msgstr "Lecture des donn閑s de l'imprimante..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Choisissez la clef de chiffrement du syst鑝e de fichiers"
+msgid "Korean keyboard"
+msgstr "Cor閑n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "Clef de chiffrement du syst鑝e de fichiers"
+msgid "Not connected"
+msgstr "Non connect"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Type: "
-msgstr "Type: "
+msgid "Greek"
+msgstr "Grec"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "sur canal %d id %d\n"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Si \\fIarg\\fP = ALL, permet /etc/issue et /etc/issue.net d'exister. Si"
+"\\fIarg\\fP = NONE, seulement /etc/issue est permis."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Table des partitions de type: %s\n"
+msgid "Saint Kitts and Nevis"
+msgstr "Saint-Kitts-et-Nevis"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "disques LVM %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"Transfert r閡ssi.\n"
+"Vous pouvez v閞ifier votre mot de passe sur le serveur avec:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"sans qu'il ne soit affich de demande."
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Info: "
-msgstr "Information: "
+msgid "Enable OF Boot?"
+msgstr "Autoriser le d閙arrage sur l'OF?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "G閛m閠rie: %s cylindres, %s t阾es, %s secteurs\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Les partitions JFS doivent faire au moins 16燤o."
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Taille: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Fr閝uence verticale: %s\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Read-only"
-msgstr "Prot間 en lecture"
+msgid "path"
+msgstr "chemin"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Device: "
-msgstr "P閞iph閞ique: "
+msgid "Mount point"
+msgstr "Point de montage"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-"\n"
-"Cette partition d'amor鏰ge (bootstrap)\n"
-"est n閏essaire si vous avez plusieurs\n"
-"syst鑝es d'exploitation. \n"
+"Une erreur est survenue:\n"
+"%s\n"
+"Essayez de changer les param鑤res"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore system"
+msgstr "Restaurer le syst鑝e"
+
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-"\n"
-"Cette partition est probablement\n"
-"une partition de pilotes syst鑝es,\n"
-"vous ne devriez pas la toucher.\n"
+"Voici les machines partir desquelles les scanners connect閟 localement "
+"seront disponibles:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom du fichier de bouclage: %s"
+msgid "The DHCP end ip"
+msgstr "L'adresse DHCP de fin"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "disques RAID %s\n"
+msgid "Another one"
+msgstr "Un autre"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Taille de bloc %s\n"
+msgid "Drakbackup"
+msgstr "Drakbackup"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "RAID de niveau %s\n"
+msgid "Colombia"
+msgstr "Colombie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-"Partition d'amor鏰ge par d閒aut\n"
-"(pour DOS/Windows, pas pour LILO)\n"
+"Configuration actuelle de 珷%s牷:\n"
+"\n"
+"R閟eau: %s\n"
+"Adresse IP: %s\n"
+"Attribution de l'adresse: %s\n"
+"Pilote: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Fichier(s) de bouclage:\n"
-" %s\n"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "Appartient au RAID md%s\n"
+msgid "Reunion"
+msgstr "R閡nion, 頻e de la"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Mont閑\n"
+msgid "Details"
+msgstr "D閠ails"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Non format閑\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Pour des raisons de s閏urit, il va 阾re d閏onnect maintenant."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Formatted\n"
-msgstr "Format閑\n"
+msgid "Synchronization tool"
+msgstr "Outil de synchronisation"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylindre %d %d\n"
+msgid "Checking your system..."
+msgstr "V閞ification de votre syst鑝e..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteurs"
+msgid "Print"
+msgstr "Imprimer"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %s"
-msgstr "Taille: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
+"Ins閞ez la bande ayant pour nom %s\n"
+"dans le lecteur de bande %s."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "D閎ut: secteur %s\n"
+msgid "Mongolia"
+msgstr "Mongolie"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nom: "
+msgid "Mounted\n"
+msgstr "Mont閑\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettre de lecteur DOS suppos閑: %s:\n"
+msgid "Graphical Interface"
+msgstr "Interface graphique"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partition %s est maintenant connue comme %s"
+msgid "Restore Users"
+msgstr "Restaurer les comptes utilisateurs"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "Suppression de %s"
+msgid "Encryption key for %s"
+msgstr "Clef de chiffrement pour %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Copying %s"
-msgstr "Copie de %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Le portmapper g鑢e les connexions RPC qui sont utilis閑s par des serveurs "
+"comme NFS et NIS. Le serveur portmap doit 阾re activ sur des machines "
+"jouant le r鬺e de serveur pour des protocoles utilisant le m閏anisme RPC."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "D閜lacement des fichiers sur la nouvelle partition..."
+msgid "Detected hardware"
+msgstr "Mat閞iel d閠ect"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Le dossier %s contient d閖 des donn閑s\n"
-"(%s)"
+msgid "Mauritius"
+msgstr "Maurice"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hide files"
-msgstr "Cacher les fichiers"
+msgid "Myanmar (Burmese)"
+msgstr "Myanmar (Burmese)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "D閜lacer les fichiers sur la nouvelle partition"
+msgid "Enabling swap partition %s"
+msgstr "Activer la partition d'閏hange %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-"Apr鑣 avoir format la partition %s, toutes les donn閑s pr閟entes\n"
-"sur cette partition seront perdues."
+"Il n'y a aucune partition FAT utiliser pour le bouclage (ou trop peu "
+"d'espace est disponible)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vous devez red閙arrer pour que les modifications soient prises en compte"
+msgid "Armenian (old)"
+msgstr "Arm閚ien (ancien)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"La table des partitions de %s va maintenant 阾re 閏rite sur le disque!"
+"Une imprimante nomm閑 珷%s牷 existe d閖 sous %s.\n"
+"Cliquez sur 珷Transfert牷 pour la remplacer.\n"
+"Vous pouvez 間alement taper un nouveau nom ou\n"
+"simplement ignorer cette imprimante."
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Le paquetage %s est requis. Souhaitez-vous l'installer?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "R閟olvez vos probl鑝es via notre plate-forme de support en ligne."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "Quel type de partitionnement?"
+msgid ", host \"%s\", port %s"
+msgstr ", h魌e 珷%s牷, port 珷%s牷"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Soyez prudent: cette op閞ation est dangereuse."
+msgid "Monaco"
+msgstr "Monaco"
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "chunk size"
-msgstr "Taille de bloc"
+msgid "%s formatting of %s failed"
+msgstr "le formatage au format %s de %s a 閏hou"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "level"
-msgstr "Niveau de RAID"
+msgid "Partitioning failed: %s"
+msgstr "Le partitionnement a 閏hou闋: %s"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "device"
-msgstr "p閞iph閞ique"
+msgid "Canada (cable)"
+msgstr "Canada (c鈈le)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Various"
-msgstr "Divers"
+msgid "Upgrade"
+msgstr "Mise jour"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mount options"
-msgstr "Options de montage"
+msgid "Workstation"
+msgstr "Station de travail"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "Le fichier existe d閖. Faut-il l'utiliser?"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installation du paquetage %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid "Kyrgyzstan"
+msgstr "Kirghizistan"
+
+#: ../../help.pm:1
+#, c-format
+msgid "With basic documentation"
+msgstr "Avec la documentation de base"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Anacron is a periodic command scheduler."
msgstr ""
-"Ce fichier est d閖 utilis par un bouclage.\n"
-"Veuillez en choisir un autre."
+"Anacron ex閏ute des t鈉hes p閞iodiques avec une pr閏ision exprim閑 en jours. "
+"Les t鈉hes sont ex閏ut閑s automatiquement au red閙arrage de la machine si "
+"elles ont expir閟 leur d閘ai. Quelques t鈉hes de maintenance quotidiennes et "
+"hebdomadaires sont pr閏onfigur閑s pour le syst鑝e Mandrake.(Plus d'infos "
+"dans 珷man anacron牷)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "Donnez un nom de fichier"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Vous devez avoir une partition racine.\n"
+"Pour la d閒inir, cr閑z une partition (ou choisissez-en une d閖郳n"
+"existante) puis cliquez sur 珷Point de montage牷 et choisissez 珷/牷."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Type du syst鑝e de fichiers: "
+msgid "Proxy should be http://..."
+msgstr "La syntaxe doit 阾re http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Size in MB: "
-msgstr "Taille en Mo: "
+msgid "South Africa"
+msgstr "Afrique du Sud"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr "Nom du fichier de bouclage:"
+msgid "Western Sahara"
+msgstr "Sahara Occidental"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Loopback"
-msgstr "Bouclage"
+msgid "Etherboot Floppy/ISO"
+msgstr "disquette/ISO etherboot"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Cette partition ne peut pas 阾re utilis閑 pour du bouclage"
+msgid "Modify printer configuration"
+msgstr "Modifier la configuration de l'imprimante"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "Nom LVM?"
+msgid "Choose a partition"
+msgstr "Choisissez une partition"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "new"
-msgstr "Nouveau"
+msgid "Edit current rule"
+msgstr "Modifier la r鑗le"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Choisissez un LVM existant"
+msgid "%s"
+msgstr "%s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Choisissez un RAID existant"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Active/D閟active le tra鏰ge de tous les paquets IPv4 閠ranges."
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "D閜lacement de la partition..."
+msgid "Please test the mouse"
+msgstr "Veuillez tester votre souris"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "D閜lacement"
+msgid "Other Media"
+msgstr "Autre support"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Sur quel secteur souhaitez-vous la d閜lacer?"
+msgid "Backup system files"
+msgstr "Sauvegarde des fichiers syst鑝es..."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Secteur"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Sur quel disque souhaitez-vous la d閜lacer?"
+msgid "Qatar"
+msgstr "Qatar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "D閜lacer"
+msgid "LDAP Base dn"
+msgstr "Racine (dn) LDAP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "New size in MB: "
-msgstr "Nouvelle taille en Mo: "
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Il n'y a pas assez de place pour installer ce paquetage"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "Choisissez la nouvelle taille"
+msgid "generate auto-install floppy"
+msgstr "Cr閑r une disquette d'auto-installation"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Resize"
-msgstr "Redimensionner"
+msgid "Dialing mode"
+msgstr "Num閞otation"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Apr鑣 avoir redimensionn la partition %s, toutes les donn閑s pr閟entes\n"
-"sur cette partition seront perdues"
+msgid "File sharing"
+msgstr "Partage de fichiers"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Toutes les donn閑s pr閟entes sur cette partition\n"
-"devraient avoir 閠 sauvegard閑s."
+msgid "Clean /tmp at each boot"
+msgstr "Vider le dossier /tmp chaque d閙arrage"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Cette partition ne peut pas 阾re redimensionn閑"
+msgid "Malawi"
+msgstr "Malawi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcul des limites du syst鑝e de fichiers FAT..."
+msgid "Please choose your type of mouse."
+msgstr "Veuillez choisir le type de votre souris."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "O d閟irez-vous monter %s?"
+msgid "class of hardware device"
+msgstr "classe de mat閞iel"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-"Il est impossible de d閟閘ectionner ce point de montage car il est\n"
-"utilis pour du bouclage. Veuillez supprimer ce dernier d'abord."
+"Voici les machines et les r閟eaux partir desquels les imprimantes locales "
+"seront disponibles:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "O d閟irez-vous monter la partition %s?"
+msgid "United Kingdom"
+msgstr "Royaume-Uni"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "O d閟irez-vous monter le fichier de bouclage %s?"
+msgid "running"
+msgstr "actif"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Passage de ext2 ext3"
+msgid "default"
+msgstr "par d閒aut"
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Quel syst鑝e de fichiers d閟irez-vous utiliser?"
+msgid "Indonesia"
+msgstr "Indon閟ie"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Change partition type"
-msgstr "Changement du type de partition"
+msgid "France [SECAM]"
+msgstr "France [SECAM]"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "restrict"
+msgstr "protection"
+
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "obligatoire"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-"Apr鑣 avoir modifi le type de la partition %s, toutes les donn閑s\n"
-"pr閟entes sur cette partition seront perdues."
+"CUPS ne supporte pas les imprimantes sur les serveurs Novell ni les "
+"impressions vers des commandes shell.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr "Supprimer le fichier de boucle?"
+msgid "Senegal"
+msgstr "S閚間al"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Command line"
+msgstr "Ligne de commande"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-"Vous ne pouvez pas cr閑r de nouvelle partition\n"
-"(vous avez atteint le nombre maximum de partitions primaires).\n"
-"Retirez d'abord une partition primaire et cr閑z une partition 閠endue."
+"Notre gamme compl鑤e de solutions Linux ainsi que des offres sp閏iales sur "
+"des produits et accessoires sont disponibles sur notre boutique en ligne :"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Pr閒閞ence: "
+msgid "access to administrative files"
+msgstr "acc鑣 aux fichiers d'administration"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Start sector: "
-msgstr "Secteur de d閎ut: "
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
+"Impossible d'envoyer un courrier\n"
+" Votre rapport n'a pas 閠 envoy.\n"
+" Veuillez configurer 珷sendmail牷"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Cr閑r une nouvelle partition"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", p閞iph閞ique multifonction sur le port parall鑜e %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Use for loopback"
-msgstr "Utiliser pour le bouclage"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Arguments: (val)\n"
+"\n"
+"R間lez le d閘ai d'expiration du shell. Z閞o signifie pas d'expiration."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modifier le RAID"
+msgid "Montserrat"
+msgstr "Montserrat"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Supprimer du LVM"
+msgid "Automatic dependencies"
+msgstr "D閜endances automatiques"
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Supprimer du RAID"
+msgid "Swap"
+msgstr "Swap"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Add to LVM"
-msgstr "Ajouter au LVM"
+msgid "Connecting to the Internet "
+msgstr "Connexion Internet en cours..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add to RAID"
-msgstr "Ajouter au RAID"
+msgid "Restore Other"
+msgstr "Restaurer les autres fichiers ou dossiers"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "Formater"
+msgid "TV card"
+msgstr "Carte TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Detailed information"
-msgstr "Informations d閠aill閑s"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Imprimante sur serveur SMB (Windows 95/98/NT)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Tentative de lecture de l'organisation des partitions..."
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-"Ins閞ez une disquette dans le lecteur.\n"
-"Toutes les donn閑s pr閟entes sur cette disquette seront perdues."
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Attention"
+"Arguments: (umask)\n"
+"\n"
+"R鑗le le 珷umask牷 de root"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select file"
-msgstr "S閘ectionnez un fichier"
+msgid "Remove selected host/network"
+msgstr "Supprimer l'h魌e/r閟eau s閘ectionn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-"La table des partitions contenue sur la sauvegarde\n"
-"n'a pas la m阭e taille que le disque.\n"
-"D閟irez-vous tout de m阭e continuer?"
+"Postfix est un agent de transport du courrier (Mail Transport Agent - MTA) "
+"permettant l'閏hange de courriers 閘ectroniques entre machines."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Removable media automounting"
-msgstr "Auto-montage des p閞iph閞iques amovibles"
+msgid "Disconnection from the Internet failed."
+msgstr "蒫hec de d閏onnexion d'Internet."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "Relire la table des partitions"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Vous pouvez choisir ici la touche ou la combinaison de touches qui\n"
+"permettra de commuter entre les diff閞ents types de claviers\n"
+"(ex: latin et non latin)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "Deviner automatiquement la table des partitions"
+msgid "Network Hotplugging"
+msgstr "Branchement chaud du r閟eau"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "Charger une table des partitions..."
+msgid "if set to yes, reports check result to tty."
+msgstr "Si oui, envoie le rapport de v閞ification dans le terminal."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save partition table"
-msgstr "Sauvegarder la table des partitions..."
+msgid "Restore From CD"
+msgstr "Restaurer partir d'un CD"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"Pour pouvoir utiliser plus de partitions, vous devez d'abord en supprimer "
-"une pour la remplacer par une partition 閠endue."
+"Vous 阾es sur le point de configurer votre ordinateur pour partager sa "
+"connexion internet.\n"
+"Avec cette fonction, d'autres ordinateurs sur votre r閟eau local pourront "
+"utiliser la connexion internet de cet ordinateur.\n"
+"\n"
+"Assurez-vous d'avoir configur votre acc鑣 R閟eau/Internet gr鈉e "
+"DrakConnect avant d'aller plus loin.\n"
+"\n"
+"Veuillez noter que vous avez besoin d'une carte r閟eau d閐i閑 votre r閟eau "
+"local."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "Impossible d'ajouter une partition"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Veuillez choisir la carte r閟eau qui sera connect閑 Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "Toutes les partitions primaires sont utilis閑s"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Acc鑣 la carte m閙oire photo de votre p閞iph閞ique multifonction"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Hard drive information"
-msgstr "Informations sur les disques durs"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"Am閘iorez les performances de votre ordinateur gr鈉e l'aide d'une "
+"s閘ection de partenaires offrant des solutions professionnelles compatibles "
+"avec Mandrake Linux"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Auto allocate"
-msgstr "Partitionnement automatique"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Le partage de la connexion Internet est maintenant d閟activ."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Supprimer toutes les partitions"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
+"Si oui, v閞ifie les sommes de contr鬺e des fichiers ayant la permission suid/"
+"sgid."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "D閟irez-vous sauvegarder les modifications de /etc/fstab"
+msgid "Latin American"
+msgstr "Latino-am閞icain"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "D閟irez-vous r閑llement quitter sans 閏rire la table des partitions?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Changer le syst鑝e d'impression"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Quit without saving"
-msgstr "Quitter sans sauvegarder"
+msgid "Old device file"
+msgstr "Ancien nom de p閞iph閞ique"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "D閟irez-vous tout de m阭e continuer?"
+msgid "Info: "
+msgstr "Information: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Passer en mode expert"
+msgid "Button `%s': %s"
+msgstr "Bouton 珷%s牷: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Passer en mode normal"
+msgid "Please wait"
+msgstr "Veuillez patienter"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Undo"
-msgstr "蓆at pr閏閐ent"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Exit"
-msgstr "Quitter"
+msgid "None"
+msgstr "Aucun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "Choisissez une partition"
+msgid "The entered IP is not correct.\n"
+msgstr "L'adresse IP n'est pas correcte.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose another partition"
-msgstr "Choisissez une autre partition"
+msgid "Ethernet Card"
+msgstr "Carte ethernet"
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Change type"
-msgstr "Changer le type"
+msgid "Info"
+msgstr "Information"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Search servers"
-msgstr "Rechercher les serveurs"
+msgid "Install"
+msgstr "Installation"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
-msgstr "Domaine"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Cliquez sur 珷%s牷 si vous voulez vraiment effacer toute l'information et\n"
+"les partitions. Soyez prudent, apr鑣 avoir cliqu sur 珷%s牷, vous ne\n"
+"pourrez plus r閏up閞er les donn閑s ou les partitions, y compris les donn閑s\n"
+"Windows.\n"
+"\n"
+"Cliquez 珷%s牷 pour annuler cette op閞ation sans perdre de donn閑s."
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Username"
-msgstr "Nom d'utilisateur"
+msgid "Exit install"
+msgstr "Fin de l'installation"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-"Veuillez entrer vos nom d'utilisateur, mot de passe et nom de domaine pour "
-"acc閐er ce serveur"
+"Tout a 閠 configur.\n"
+"Vous pouvez maintenant partager votre connexion internet avec d'autres "
+"ordinateurs sur votre r閟eau local, en utilisant la configuration r閟eau "
+"automatique (DHCP)."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domaine d'authentification n閏essaire"
+msgid "Remote CUPS server"
+msgstr "Serveur CUPS distant"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Another one"
-msgstr "Un autre"
+msgid "Sun - Mouse"
+msgstr "Souris SUN"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which username"
-msgstr "Quel nom d'utilisateur"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"Une seule carte r閟eau est configur閑 sur votre syst鑝e:\n"
+"\n"
+"%s\n"
+"\n"
+"Je vais configurer votre r閟eau local avec cette carte r閟eau."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Impossible de se connecter avec le nom %s (mauvais mot de passe?)"
+msgid "Minimal install"
+msgstr "Installation minimale"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "cpu # "
-msgstr "processeur n"
+msgid "Ethiopia"
+msgstr "蓆hiopie"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SMBus controllers"
-msgstr "Contr鬺eurs SMB"
+msgid "Devanagari"
+msgstr "Devanagari"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USB controllers"
-msgstr "Contr鬺eurs USB"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- p閞iph閞iques PCI: slot, p閞iph閞iques et fonction PCI de cette carte\n"
+"- p閞iph閞iques EIDE: ce p閞iph閞ique est soit ma顃re, soit esclave\n"
+"- p閞iph閞iques SCSI: le bus et l'identifiant SCSI"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr "Contr鬺eurs SCSI"
+msgid "Total size: %d / %d MB"
+msgstr "Taille totale: %d / %d Mo"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Firewire controllers"
-msgstr "Contr鬺eurs Firewire"
+msgid "disabled"
+msgstr "d閟activ"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Contr鬺eurs (E)IDE/ATA"
+msgid "Search for new scanners"
+msgstr "Rechercher des nouveaux scanners"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Joystick"
-msgstr "Joystick"
+msgid "Disabling servers..."
+msgstr "D閟activation des serveurs..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanner"
-msgstr "Scanner"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Veuillez choisir l'intervalle de temps entre les sauvegardes"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Unknown/Others"
-msgstr "Inconnus/Autres"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "L'installation de %s a 閏hou pour la raison suivante:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Bridges and system controllers"
-msgstr "Ponts et contr鬺eurs syst鑝e"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Impossible de lancer mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Modem"
-msgstr "Modem"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Vous avez s閘ectionn le(s) serveur(s) suivant(s): %s\n"
+"\n"
+"\n"
+"Ces serveurs seront activ閟 par d閒aut.\n"
+"Ils n'ont actuellement aucun probl鑝e de s閏urit connu,\n"
+"mais si des vuln閞abilit閟 sont d閏ouvertes par la suite,\n"
+"vous devrez effectuer une mise jour le plus rapidement possible.\n"
+"\n"
+"\n"
+"Confirmez vous l'installation de ces serveurs?\n"
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Ethernetcard"
-msgstr "Carte ethernet"
+msgid "Network printer (TCP/Socket)"
+msgstr "Imprimante r閟eau autonome (TCP/Socket)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Processors"
-msgstr "Processeurs"
+msgid "Backup User files..."
+msgstr "Sauvegarde des comptes utilisateurs..."
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Webcam"
-msgstr "Webcam"
+msgid "Install system"
+msgstr "Installation du syst鑝e"
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Soundcard"
-msgstr "Carte son"
+msgid "First DNS Server (optional)"
+msgstr "serveur DNS principal (optionnel)"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Autre p閞iph閞iques multim閐ia"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Sinon vous pouvez sp閏ifier un nom de p閞iph閞ique ou de fichier dans le "
+"champ d'entr閑"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tvcard"
-msgstr "Carte TV"
+msgid "dhcpd Config..."
+msgstr "Configuration de dhcpd..."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Videocard"
-msgstr "Carte vid閛"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
+"La configuration a d閖 閠 effectu閑, mais elle est actuellement d閟activ閑."
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Tape"
-msgstr "Bande"
+msgid "LILO/grub Installation"
+msgstr "Installation de LILO ou Grub"
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr "DVD"
+msgid "Israeli"
+msgstr "Isra閘ien"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "CD/DVD burners"
-msgstr "Graveurs CD/DVD"
+msgid "load setting"
+msgstr "chargement des param鑤res"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CDROM"
-msgstr "CD-Rom"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Imprimante 珷%s牷 sur serveur 珷%s牷"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Disk"
-msgstr "Disques"
+msgid "Floppy can be removed now"
+msgstr "La disquette peut maintenant 阾re retir閑 du lecteur"
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zip"
-msgstr "Lecteurs Zip"
+msgid "Truly minimal install"
+msgstr "Installation r閑llement minimale"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy"
-msgstr "Lecteur de disquette"
+msgid "Denmark"
+msgstr "Danemark"
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Let me pick any driver"
-msgstr "Choix d'un pilote"
+msgid "Moving partition..."
+msgstr "D閜lacement de la partition..."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Driver:"
-msgstr "Pilote:"
+msgid "(This) DHCP Server IP"
+msgstr "Adresse IP du serveur DHCP"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Si vous pensez vraiment savoir quel pilote est le bon pour votre carte\n"
-"vous pouvez en choisir un dans la liste ci-dessous.\n"
-"\n"
-"Le pilote actuel pour votre carte son \"%s\" est \"%s\"."
+msgid "Test of the configuration"
+msgstr "Test de la configuration"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Choix arbitraire d'un pilote..."
+msgid "Installing %s ..."
+msgstr "Installation de %s ..."
-#: ../../harddrake/sound.pm:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-"Pour r閟oudre un probl鑝e de son,\n"
-"vous pouvez hurler les commandes suivantes dans une console:\n"
-"\n"
-"- 珷lspcidrake -v | fgrep AUDIO牷 vous indique quel pilote votre carte\n"
-" utilise par d閒aut\n"
-"\n"
-"- 珷grep sound-slot /etc/modules.conf牷 vous affiche quel pilote\n"
-"(module) est actuellement utilis.\n"
+"Finalement, si vous avez choisi de s閘ectionner individuellement les\n"
+"paquetages installer, DrakX vous pr閟entera un arbre contenant tous les\n"
+"paquetages, class閟 par groupes et sous-groupes. En naviguant travers\n"
+"l'arbre, vous pouvez s閘ectionner des groupes, des sous-groupes ou des\n"
+"paquetages individuels.\n"
"\n"
-"- 珷/sbin/lsmod牷 vous permet de v閞ifier si ce module est charg閈n"
+"D鑣 que vous s閘ectionnez un paquetage dans l'arbre, une description\n"
+"appara顃 droite. Une fois votre s閘ection termin閑, cliquez sur 珷%s牷\n"
+"pour lancer le processus. Soyez patient, car en fonction du type\n"
+"d'installation choisi ou du nombre de paquetages s閘ectionn閟, le temps\n"
+"requis peut 阾re substantiellement diff閞ent. Une estimation du temps\n"
+"requis est pr閟ent閑 sur l'閏ran en cours d'op閞ation afin de vous\n"
+"permettre d'関aluer de combien de temps vous disposez pour prendre votre\n"
+"d閖euner.\n"
"\n"
-"- 珷/sbin/chkconfig --list sound牷 et 珷/sbin/chkconfig --list alsa牷\n"
-"vous diront si les services 珷sound牷 et 珷alsa牷 sont configur閟 pour\n"
-"阾re d閙arr閟 d鑣 le niveau d'ex閏ution 3 (init runlevel 3)\n"
+"!! Si un logiciel serveur a 閠 s閘ectionn, vous devrez confirmer que vous\n"
+"voulez vraiment que celui-ci soit install. Sous Mandrake, par d閒aut, tous\n"
+"les serveurs install閟 sont lanc閟 au d閙arrage. Malgr tous les efforts\n"
+"investis pour vous livrer une distribution Linux s閏uritaire, il est\n"
+"possible que certaines failles de s閏urit affectes les serveurs install閟\n"
+"au-del de la date de publication. Si vous ne savez pas pr閏is閙ent quoi\n"
+"sert un serveur en particulier ou pourquoi il est install, cliquez sur\n"
+"珷%s牷. En cliquant sur 珷%s牷, le serveur sera install et le service\n"
+"rendu disponible au d閙arrage. !!\n"
"\n"
-"- 珷aumix -q牷 vous chuchotera peut-阾re que le volume est coup...\n"
+"L'option 珷%s牷 d閟active les avertissements qui apparaissent chaque fois\n"
+"que l'installeur s閘ectionne un nouveau paquet. Ces avertissements\n"
+"surviennent parce que DrakX a d閠ermin que pour qu'un paquetage soit\n"
+"fonctionnel, il lui en faut un autre dont il est d閜endant.\n"
"\n"
-"- 珷/sbin/fuser -v /dev/dsp牷 d閚oncera quel programme est en train\n"
-"d'utiliser ou de bloquer la carte son.\n"
+"La petite ic鬾e de disquette qui appara顃 au bas de la liste permet de\n"
+"r閏up閞er une liste de paquetages s閘ectionn閟 durant une autre\n"
+"installation. En cliquant dessus, on vous demandera d'ins閞er la disquette\n"
+"cr殚e lors d'une installation pr閏閐ente. Voir la deuxi鑝e note de la\n"
+"derni鑢e 閠ape afin de savoir comment cr閑r une telle disquette."
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr "R閟olution d'un probl鑝e de son"
+msgid "Choose your filesystem encryption key"
+msgstr "Choisissez la clef de chiffrement du syst鑝e de fichiers"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-"Erreur: le pilote 珷%s牷 pour votre carte son n'est pas dans la liste."
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unkown driver"
-msgstr "Pilote inconnu"
+"SVP choisissez votre lecteur CD/DVD\n"
+"(Appuyer sur Entr閑 pour 閠endre les param鑤res aux\n"
+"autres champs. Ce champ n'est pas indispensable et ne sert que d'info)."
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Il n'y a pas de pilote connu pour votre carte son (%s)"
+msgid "Andorra"
+msgstr "Andorre"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "Aucun pilote connu"
+msgid "Sierra Leone"
+msgstr "Sierra Leone"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Il n'existe pas de pilote libre pour votre carte son (%s), mais il en existe "
-"un propri閠aire 珷%s牷"
+msgid "Botswana"
+msgstr "Botswana"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "No open source driver"
-msgstr "Pas de pilote open-source"
+msgid "(default value: %s)"
+msgstr "(valeur par d閒aut: %s)"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Veuillez patienter... Mise en place de la configuration"
+msgid "Alternative test page (Letter)"
+msgstr "Page de test alternative (Letter)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-"L'ancien pilote 珷%s牷 est sur liste noire.\n"
+"Configuration du serveur DHCP.\n"
"\n"
-"Plusieurs personnes ont rapport des probl鑝es avec le noyau lors de son "
-"arr阾.\n"
+"Vous pouvez ici s閘ectionner diff閞entes options pour le serveur DHCP.\n"
+"Si vous ne connaissez pas leur signification, laissez-les telles quelles.\n"
"\n"
-"Le nouveau pilote 珷%s牷 ne sera utilis qu'au prochain d閙arrage."
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Trouble shooting"
-msgstr "R閟olution de probl鑝e"
+msgid "Choose an X server"
+msgstr "Choisissez un serveur d'affichage (serveur XFree)"
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Taille de la partition d'閏hange (swap) en Mo: "
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-"OSS (Open Sound System) fut la premi鑢e API sonore. Elle est multi plate-"
-"formes (disponible sur la majorit des syst鑝es unix) mais est limit閑 et "
-"tr鑣 basique.\n"
-"De ce fait, tous les pilotes OSS doivent r閕nventer la roue.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) est une architecture modulaire qui\n"
-"supporte un nombre impressionnant de cartes ISA, PCI et USB.\n"
-"\n"
-"Elle fournit 間alement une API de plus haut niveau qu'OSS.\n"
-"\n"
-"Pour utiliser ALSA, il est possible d'utiliser:\n"
-"- la compatibilit avec l'ancienne API OSS\n"
-"- la nouvelle API ALSA qui fournit un grand nombre de possibilit閟 avanc閑s "
-"mais n閏essite la biblioth鑡ue ALSA.\n"
+"D'autres clefs (pas de\n"
+"drakbackup sont d閖 en place"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No changes to backup!"
+msgstr "Pas de changement sauvegarder!"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Format閑\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
+msgstr "Type d'installation"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Imprimante 珷%s牷 sur serveur Windows/SMB 珷%s牷"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
msgstr ""
"\n"
-"\n"
-"Votre carte utilise actuellement le pilote %s 珷%s牷 (le pilote par d閒aut "
-"閠ant 珷%s牷)"
+"- Le D閙on (%s) comprend:\n"
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
+#, c-format
+msgid "%d comma separated numbers"
+msgstr "%d nombres s閜ar閟 par des virgules"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-"Vous pouvez s閘ectionner ici un pilote alternatif (OSS ou ALSA) pour votre "
-"carte son (%s)"
+"Le protocole rusers permet aux utilisateurs de conna顃re tous les "
+"utilisateurs connect閟 aux machines supportant ce protocole."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Sound configuration"
-msgstr "Configuration du son"
+msgid "Automatic Steps Configuration"
+msgstr "Configuration des 閠apes automatiques"
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-"Il n'existe pas de pilote alternatif OSS ou ALSA connu pour votre carte son "
-"(%s) qui actuellement utilise 珷%s牷"
+"Vous d閟irez en savoir plus et contribuer la communaut Open Source ? "
+"Impliquez-vous dans le monde Open Source !"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr "Pas de pilote alternatif"
+msgid "Barbados"
+msgstr "Barbade"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable radio support"
-msgstr "activer le support de la radio"
+msgid "Please select data to backup..."
+msgstr "Veuillez choisir les donn閑s sauvegarder..."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Radio support:"
-msgstr "Support de la radio:"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"La connexion a 閏hou.\n"
+"V閞ifiez votre configuration dans le Centre de Contr鬺e Mandrake."
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "PLL setting:"
-msgstr "R間lage de la BVP (PLL)"
+msgid "received"
+msgstr "re鐄s"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nombre de tampons pour la capture via mmap()"
+msgid "/File/_New"
+msgstr "/Fichier/_Nouveau"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nombre de tampons de capture"
+msgid "The DNS Server IP"
+msgstr "L'adresse IP du serveur DNS"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tuner type:"
-msgstr "Type de tuner:"
+msgid "IP Range End:"
+msgstr "Fin de la plage d'adresses IP:"
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Card model:"
-msgstr "Mod鑜e de carte:"
+msgid "High"
+msgstr "蒷ev閑"
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Pour la plupart des cartes TV r閏entes, le module bttv du noyau GNU/Linux "
-"auto-d閠ecte tout seul les bons param鑤res.\n"
-"Si votre carte est mal d閠ect閑, vous pouvez donner les types de tuner et de "
-"carte corrects ici. Vous n'avez qu'a s閘ectionner les param鑤res n閏essaires "
-" votre carte TV si n閏essaire."
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Ce champs d閏rit le p閞iph閞ique"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "Inconnu|G閚閞ique"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ajout de l'imprimante StarOffice/OpenOffice"
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Inconnu|CPH06X (bt878) [nombreux vendeurs]"
+msgid "Local Printers"
+msgstr "Imprimantes locales"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Inconnu|CPH05X (bt878) [nombreux vendeurs]"
+msgid "Installation image directory"
+msgstr "Dossier des images d'installation"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "Auto-d閠ecter"
+msgid "NIS Server"
+msgstr "Serveur NIS"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Do"
-msgstr "Faire"
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Que choisissez-vous? (%s par d閒aut) "
+msgid "Spain"
+msgstr "Espagne"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Choix erron, veuillez recommencer\n"
+msgid "This user name has already been added"
+msgstr "Ce nom d'utilisateur est d閖 utilis"
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "Revalider"
+msgid "Choose a file"
+msgstr "Choisissez un fichier"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notez qu'un message a chang闋:\n"
-"%s"
+msgid "Apply"
+msgstr "Appliquer"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Veuillez choisir le premier nombre du groupe de 10 que vous\n"
-"souhaitez modifier, ou appuyez juste sur <Entr閑> pour continuer.\n"
-"Votre choix? "
+msgid "Auto-detect available ports"
+msgstr "Auto-d閠ecter les ports disponibles"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Il y a beaucoup de choses choisir (%s).\n"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Le partage de la connexion Internet est d閟activ"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Que choisissez-vous? (珷%s牷 par d閒aut%s) "
+msgid "San Marino"
+msgstr "San Marin"
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid " enter `void' for void entry"
-msgstr "Saisissez `void' pour une entr閑 vide"
+msgid "Belgium"
+msgstr "Belgique"
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "D閟irez-vous cliquer sur ce bouton?"
+msgid "Kuwait"
+msgstr "Koweit"
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "Bouton 珷%s牷: %s"
+msgid "Choose the window manager to run:"
+msgstr "Choisissez l'environnement graphique:"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Sous-g閚閞ation de processeur"
+
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Votre choix? (0/1, d閒aut 珷%s牷)"
+msgid "First Time Wizard"
+msgstr "Assistant de premi鑢e connexion"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
-"Les champs que vous devrez remplir sont:\n"
-"%s"
+"Une erreur est survenue et semble difficile r閟oudre correctement.\n"
+"Vous pouvez continuer, mais vos risques et p閞ils."
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Le chargement du module %s a 閏hou.\n"
-"D閟irez-vous r閑ssayer avec d'autres param鑤res?"
+msgid "please wait, parsing file: %s"
+msgstr "s'il vous pla顃 attendez, examen du fichier: %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Specify options"
-msgstr "Sp閏ifier des options"
+msgid "Taiwan"
+msgstr "Ta飛an"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "D閠ection automatique"
+msgid "Pakistan"
+msgstr "Pakistan"
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-"Le pilote de mat閞iel 珷%s牷 a parfois besoin d'options suppl閙entaires\n"
-"pour fonctionner de mani鑢e optimale.\n"
-"Vous pouvez lui fournir manuellement ces options,\n"
-"ou bien lui laisser les d閠ecter automatiquement.\n"
-"(La d閠ection peut dans certains cas bloquer l'ordinateur,\n"
-"mais sans lui causer de dommage.)"
+"Afin de pouvoir imprimer avec votre imprimante Lexmark inkjet et la "
+"configuration actuelle, vous avez besoin des pilotes d'impression inkjet "
+"fournis par Lexmark (http://www.lexmark.com/). Allez sur la section "
+"珷Drivers牷 du site am閞icain de Lexmark, puis choisissez votre mod鑜e et "
+"enfin 珷Linux牷 comme syst鑝e d'exploitation. Les pilotes sont des "
+"paquetages RPM ou des scripts shell avec une installation graphique "
+"interactive. Vous n'avez pas besoin de faire cette configuration avec "
+"l'interface graphique. Annulez directement apr鑣 l'acceptation de la "
+"licence. Ensuite, imprimez les pages pour l'alignement des t阾es "
+"d'impression avec 珷lexmarkmaintain牷 et ajustez les param鑤res de ces t阾es "
+"avec ce programme."
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quel pilote %s faut-il essayer?"
+msgid "Permissions"
+msgstr "Permissions"
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Module options:"
-msgstr "Options du module:"
+msgid "Provider name (ex provider.net)"
+msgstr "Fournisseur d'acc鑣 (ex.: fournisseur.fr)"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Vous pouvez maintenant pr閏iser les options du module %s.\n"
-"Les options sont de la forme 珷nom=valeur nom2=valeur2 ...牷.\n"
-"Par exemple, 珷io=0x300 irq=7牷"
+msgid "Version: %s\n"
+msgstr "Version: %s\n"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Vous pouvez maintenant fournir des options au module %s.\n"
-"Veuillez noter que les adresses doivent 阾re pr閏閐閑s de 0x, comme 珷0x123牷"
+"Votre ordinateur poss鑔e peu de m閙oire. Vous aurez peut-阾re quelques\n"
+"probl鑝es pour installer Mandrake Linux. Si cela se produit, vous pouvez\n"
+"essayer de proc閐er une installation en mode texte. Pour cela, appuyez\n"
+"sur la touche 珷F1牷 apr鑣 l'amor鏰ge sur CD-Rom puis entrez 珷text牷."
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
+msgid "Use the Windows partition for loopback"
+msgstr "Utiliser la partition Windows pour le bouclage"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation du pilote pour la carte %s %s"
+msgid "Armenian (typewriter)"
+msgstr "Arm閚ien (machine 閏rire)"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "See hardware info"
-msgstr "Voir les informations sur le mat閞iel"
+msgid "Connection type: "
+msgstr "Type de connexion: "
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Poss閐ez-vous des interfaces %s?"
+msgid "Graphical interface"
+msgstr "Interface graphique"
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Do you have another one?"
-msgstr "En poss閐ez-vous d'autres?"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s avec acc閘閞ation 3D mat閞ielle"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interface(s) d閠ect閑(s): %s %s"
+msgid "India"
+msgstr "Inde"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Vous pouvez configurer ici chaque param鑤re du module."
+msgid "Chad"
+msgstr "Tchad"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated strings"
-msgstr "cha頽es s閜ar閑s par des virgules"
+msgid "Slovakia"
+msgstr "Slovaquie"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "comma separated numbers"
-msgstr "nombres s閜ar閟 par des virgules"
+msgid "Singapore"
+msgstr "Singapour"
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d comma separated strings"
-msgstr "%d cha頽es s閜ar閑s par des virgules"
+msgid "Cambodia"
+msgstr "Cambodge"
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d nombres s閜ar閟 par des virgules"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Fr閝uence horizontale: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "a number"
-msgstr "un nombre"
+msgid "Path"
+msgstr "Chemin"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-"Vous avez besoin du microcode d'Alcatel.\n"
-"T閘閏hargez-le 郳n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"et copiez le fichier mgmt.o dans /usr/share/speedtouch"
+"Vous pouvez sp閏ifier ici une ligne de commande dans laquelle sera "
+"redirig閑 l'impression, au lieu d'阾re envoy閑 l'imprimante."
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"La fa鏾n la plus courante de se connecter Internet en utilisant\n"
-"une ligne ADSL est d'utiliser 珷pppoe牷.\n"
+"Le syst鑝e d'impression (%s) ne sera pas activ automatiquement lors du "
+"d閙arrage de la machine.\n"
"\n"
-"Certaines connexions utilisent 珷pptp牷, quelques unes se servent de "
-"珷DHCP牷.\n"
+"Il est possible que l'activation automatique ait 閠 supprim閑 par "
+"l'utilisation d'un plus grand niveau de s閏urit, car les syst鑝es "
+"d'impression sont des cibles potentielles d'attaque.\n"
"\n"
-"Si vous ne savez pas quoi choisir, utilisez pppoe."
+"Souhaitez-vous r閠ablir l'activation automatique du syst鑝e d'impression?"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Connexion Internet"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Imprimante %s\n"
+"Que souhaitez-vous modifier sur cette imprimante?"
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem USB (avec pppoa)"
+msgid "Add host"
+msgstr "Ajouter un h魌e"
-#: ../../network/adsl.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+"Si vous pensez vraiment savoir quel pilote est le bon pour votre carte\n"
+"vous pouvez en choisir un dans la liste ci-dessous.\n"
+"\n"
+"Le pilote actuel pour votre carte son \"%s\" est \"%s\"."
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "utiliser 珷dhcp牷"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+msgstr ""
+"Souhaitez-vous permettre aux utilisateurs de partager certains sous-"
+"r閜ertoires de leur dossier personnel (/home)?\n"
+"De cette fa鏾n, les utilisateurs pouront simplement cliquer sur 珷Partager牷 "
+"dans Konqueror (kde) et Nautilus (gnome).\n"
+"\n"
+"珷Personnalis閑牷 permet d'autoriser le partage pour certains utilisateurs.\n"
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "utiliser 珷pptp牷"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Vous avez le choix entre:\n"
+"- Sauver sur disquette la s閘ection des paquetages.\n"
+"- 蓆ablir un nouveau choix de s閘ection partir d'une sauvegarde sur "
+"disquette.\n"
+"Le format est le m阭e que celui des disquettes g閚閞閑s pour l'installation "
+"automatis閑."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "use pppoe"
-msgstr "utiliser 珷pppoe牷"
+msgid "China (broadcast)"
+msgstr "Chine (hertzien)"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other ports"
-msgstr "Autres ports"
+msgid "Use quota for backup files."
+msgstr "Limiter la taille de la sauvegarde"
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "Tout (pas de firewall)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Configuration en cours de l'imprimante 珷%s牷..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-"Le port entr est incorrect: %s.\n"
-"Le bon format est 珷port/tcp牷 ou 珷port/udp牷, \n"
-"o le port est compris entre 1 et 65535."
+msgid "Internet connection"
+msgstr "Connexion internet"
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-"Vous pouvez entrer divers ports. \n"
-"Exemples valides: 139/tcp 139/udp.\n"
-"Jetez un 絠l /etc/services pour plus d'infos."
+"Le chargement du module %s a 閏hou.\n"
+"D閟irez-vous r閑ssayer avec d'autres param鑤res?"
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Quels services souhaitez-vous laisser accessible depuis internet?"
+msgid "Welcome to the Open Source world."
+msgstr "Bienvenue dans le monde de l'Open Source."
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"configuration drakfirewall\n"
-"\n"
-"Assurez-vous d'avoir configur le r閟eau et Internet gr鈉e 郳n"
-"drakconnect avant d'aller plus loin."
+msgid "Bosnia and Herzegovina"
+msgstr "Bosnie Herz間ovine"
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-"Configuration de drakfirewall\n"
-"\n"
-"Ceci configure un Pare-Feu (firewall) personnel pour votre machine Mandrake "
-"Linux.\n"
-"Si vous souhaitez un Pare-Feu d閐i plus puissant, tournez-vous plut魌 vers\n"
-"la distribution sp閏ialis閑 珷MandrakeSecurity牷."
+"Vous avez besoin d'un vrai syst鑝e de fichiers (ext2/ext3, reiserfs, xfs, ou "
+"jfs) pour ce point de montage\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "No network card"
-msgstr "Aucune carte r閟eau"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Vous devez entrer un nom d'h魌e ou une adresse IP.\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "Serveur POP et IMAP"
+msgid "Netherlands"
+msgstr "Pays-Bas"
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "Serveur de courrier"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Envoi des fichiers..."
-#: ../../network/drakfirewall.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Domain Name Server"
-msgstr "Serveur de Noms de domaine"
+msgid "Internal ISDN card"
+msgstr "Carte RNIS/ISDN interne"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Web Server"
-msgstr "Serveur Web"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+"Il n'existe pas de pilote alternatif OSS ou ALSA connu pour votre carte son "
+"(%s) qui actuellement utilise 珷%s牷"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Le nom d'h魌e zeroconf ne doit pas contenir de point"
+msgid "Title"
+msgstr "Titre"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Host name"
-msgstr "Nom d'h魌e:"
+msgid "Install & convert Fonts"
+msgstr "Installe et convertit des polices"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf Host name"
-msgstr "Nom d'h魌e燴eroConf"
+msgid "WARNING"
+msgstr "ATTENTION"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
-"\n"
-"\n"
-"Entrez un nom d'h魌e ZeroConf sans point si vous ne\n"
-"voulez pas utiliser le nom par d閒aut."
+msgid "Installing bootloader"
+msgstr "Installation du programme d'amor鏰ge..."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Configuring network"
-msgstr "Configuration du r閟eau"
+msgid "replay"
+msgstr "rejouer"
-#: ../../network/ethernet.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Veuillez choisir la carte r閟eau qui sera connect閑 Internet"
+msgid "detected %s"
+msgstr "d閠ect %s"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Choisissez la carte r閟eau"
+msgid "Virgin Islands (U.S.)"
+msgstr "蝜es Vierges (US)"
-#: ../../network/ethernet.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Aucune carte r閟eau n'a 閠 d閠ect閑 sur votre syst鑝e.\n"
-"La connexion ne peut donc pas 阾re configur閑."
+msgid "Bad backup file"
+msgstr "Mauvais fichier de sauvegarde"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-"Quel client DHCP d閟irez-vous utiliser?\n"
+"La configuration du partage de la connexion Internet a d閖 閠閈n"
+"effectu閑. Elle est actuellement d閟activ閑.\n"
"\n"
-"Le client par d閒aut est 珷dhcp-client牷."
+"Que souhaitez-vous faire?"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-"Aucune carte RNIS/ISDN identifi閑. Veuillez en s閘ectionner une dans le\n"
-"prochain 閏ran."
+"Entrez l'adresse IP et le num閞o de port de la machine dont vous voulez "
+"utiliser les imprimantes."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Une carte RNIS/ISDN a 閠 d閠ect閑 mais son type est inconnu. Veuillez "
-"s閘ectionner une carte PCI dans le prochain 閏ran."
+msgid "Pipe into command"
+msgstr "Impression vers une commande shell"
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Parmis les choix suivants, lequel correspond votre carte RNIS/ISDN?"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Certains p閞iph閞iques pr閟ents sur votre syst鑝e n閏essitent des\n"
+"pilotes 珷propri閠aires牷 pour pouvoir fonctionner. Vous pouvez\n"
+"trouver plus d'informations les concernant ici: %s"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Configuration RNIS/ISDN"
+msgid "Detecting devices..."
+msgstr "D閠ection des p閞iph閞iques..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Abort"
-msgstr "Arr阾er"
+msgid "Click here to launch the wizard ->"
+msgstr "Cliquez ici pour lancer l'assistant ->"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Continue"
-msgstr "Continuer"
+msgid "Haiti"
+msgstr "Ha飔i"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
+"Description of the fields:\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
msgstr ""
+"Description des champs:\n"
"\n"
-"Si vous poss閐ez une carte ISA, les donn閑s du prochain 閏ran devraient\n"
-"阾re correctes.\n"
-"\n"
-"Si vous poss閐ez une carte PCMCIA, vous avez besoin de conna顃re\n"
-"les r間lages 珷IRQ牷 et 珷IO牷 de votre carte.\n"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Je ne sais pas"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "the name of the CPU"
+msgstr "le nom du processeur"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Refreshing printer data..."
+msgstr "Mise jour des donn閑s de l'imprimante..."
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "Quel type de carte poss閐ez-vous?"
+msgid "You must also format %s"
+msgstr "Vous devez aussi formater %s"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Interface trouv閑: 珷%s牷. Voulez-vous l'utiliser?"
+msgid "Be careful: this operation is dangerous."
+msgstr "Soyez prudent: cette op閞ation est dangereuse."
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Quel protocole d閟irez-vous utiliser?"
+msgid "Insert a floppy containing package selection"
+msgstr "Ins閞ez une disquette contenant une s閘ection de paquetages."
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocole pour le reste du monde"
+msgid "Server: "
+msgstr "Serveur: "
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocole pour le reste du monde \n"
-"Pas de D-Channel (lignes lou閑s)"
+msgid "Security Alerts:"
+msgstr "Alertes de s閏urit闋:"
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "European protocol"
-msgstr "Protocole pour l'Europe"
+msgid "Sweden"
+msgstr "Su鑔e"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocole pour l'Europe (EDSS1)"
+msgid "Use Expect for SSH"
+msgstr "Utiliser Expect pour SSH"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Veuillez choisir votre fournisseur d'acc鑣.\n"
-"S'il ne figure pas dans la liste, choisissez 珷Non list闋."
+msgid "Poland"
+msgstr "Pologne"
-#: ../../network/isdn.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "External ISDN modem"
-msgstr "Modem RNIS/ISDN externe"
+msgid "Importance: %s\n"
+msgstr "Importance: %s\n"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Carte RNIS/ISDN interne"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "V閞ifiez que vous voulez 閖ecter la bande apr鑣 sauvegarde."
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Quel est le type de votre connexion RNIS/ISDN?"
+msgid "Other ports"
+msgstr "Autres ports"
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Assistant de configuration r閟eau"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "nombre de tampons pour la capture via mmap()"
-#: ../../network/isdn.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Ancienne configuration (isdn4net)"
+msgid "SMBus controllers"
+msgstr "Contr鬺eurs SMB"
-#: ../../network/isdn.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nouvelle configuration (isdn-light)"
+msgid "Connection timeout (in sec)"
+msgstr "Temps maxi pour 閠ablir la connexion (en sec.)"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-"Quelle configuration RNIS/ISDN pr閒閞ez-vous?\n"
-"\n"
-"- L'ancienne configuration contient des outils puissants,\n"
-" mais est difficile configurer, et n'est pas standard.\n"
-" Elle utilise 珷isdn4net牷\n"
-"- La nouvelle configuration est plus facile comprendre\n"
-" et plus standard, mais a moins d'outils.\n"
-" Elle utilise 珷isdn-light牷\n"
-"Nous recommandons la seconde (isdn-light)\n"
+"Certaines vielles puces i486DX-100 ne peuvent pas red閙arrer de fa鏾n fiable "
+"apr鑣 une instruction \"halt\"."
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do nothing"
-msgstr "Ne rien faire"
+msgid "Croatian"
+msgstr "Croate"
-#: ../../network/modem.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "Installation rpm"
+msgid "Use existing partition"
+msgstr "Utiliser une partition existante"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-"Winmodem d閠ect bas sur 珷%s牷. Voulez-vous installer le logiciel "
-"appropri闋?"
+msgid "Unable to contact mirror %s"
+msgstr "Impossible d'acc閐er au mirroir %s"
-#: ../../network/modem.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Title"
-msgstr "Titre"
+msgid "/Help/_About..."
+msgstr "/Aide/_A propos..."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Votre modem n'est pas support par le syst鑝e.\n"
-"Veuillez consulter http://www.linmodems.org"
+msgid "Remove user directories before restore."
+msgstr "Retirer les dossiers personnels des utilisateurs avant restauration"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "serveur DNS secondaire (optionnel)"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
+"Vous 阾es sur le point de configurer une imprimante distante. Cela n閏essite "
+"un acc鑣 au r閟eau, mais votre r閟eau n'est pas encore configur. Si vous "
+"voulez continuer sans configurer le r閟eau, vous ne pourrez pas utiliser "
+"l'imprimante que vous 阾es en train de configurer. Que souhaitez-vous faire?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "serveur DNS principal (optionnel)"
+msgid "CUPS printer configuration"
+msgstr "Configuration de l'imprimante CUPS"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Domain name"
-msgstr "Nom de domaine"
+msgid "could not find any font in your mounted partitions"
+msgstr "impossible de trouver des polices dans vos disques"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "F00f bug"
+msgstr "bogue f00f"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Script-based"
-msgstr "Bas閑 sur un script"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "Manuelle par terminal"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Quel client DHCP d閟irez-vous utiliser?\n"
+"\n"
+"Le client par d閒aut est 珷dhcp-client牷."
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Domain Name:"
+msgstr "Nom de domaine:"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Identifiant de connexion"
+msgid "On Floppy"
+msgstr "sur disquette"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Num閞o de t閘閜hone"
+msgid "Restore"
+msgstr "Restaurer!"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Nom de la connexion"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr "Si oui, v閞ifie si les p閞iph閞iques r閟eaux sont dans un mode espion"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Options d'appel"
+msgid "Looking for available packages..."
+msgstr "Recherche des paquetages disponibles..."
-#: ../../network/modem.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Veuillez choisir le port s閞ie sur lequel votre modem est connect."
+msgid "Init Message"
+msgstr "Message de d閙arrage"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Configuration du r閟eau"
+msgid "Rescue partition table"
+msgstr "Deviner automatiquement la table des partitions"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Des probl鑝es sont apparus pendant la configuration.\n"
-"Testez votre connexion avec le 珷Centre de Contr鬺e Mandrake牷 (dans la "
-"section 珷r閟eau牷) ou la commande 珷net_monitor牷. Si votre connexion ne "
-"fonctionne pas, vous pouvez essayer de relancer la configuration."
+msgid "Connection complete."
+msgstr "Connexion effectu閑."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Une fois termin, il est recommand de red閙arrer votre interface graphique, "
-"afin d'関iter les probl鑝es li閟 au changement de nom d'h魌e de la machine."
+msgid "Cyprus"
+msgstr "Chypre"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"F閘icitations, votre choix de configuration internet et r閟eau est "
-"termin閑.\n"
-"La configuration va maintenant 阾re appliqu閑 votre syst鑝e.\n"
-"\n"
+msgid "Remove from RAID"
+msgstr "Supprimer du RAID"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Un probl鑝e est survenu pendant le red閙arrage du r閟eau: \n"
-"\n"
-"%s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Cette clef de chiffrement est trop courte (minimum %d caract鑢es)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Le r閟eau doit 阾re red閙arr. Souhaitez-vous le red閙arrer?"
+msgid "Configuration Wizards"
+msgstr "Assistants de configuration"
#: ../../network/netconnect.pm:1
#, c-format
-msgid "Network configuration"
-msgstr "Configuration du r閟eau"
+msgid "ISDN connection"
+msgstr "Connexion par RNIS/ISDN"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "D閟irez-vous activer la connexion lors du d閙arrage?"
+msgid "primary"
+msgstr "ma顃re"
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "Connexion internet"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " sur serveur Windows 珷%s牷, partage 珷%s牷"
-#: ../../network/netconnect.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-"Vous avez configur plusieurs moyens d'acc鑣 Internet.\n"
-"Choisissez celui que vous voulez utiliser.\n"
+"Vous pouvez maintenant choisir les services disponibles au d閙arrage de\n"
+"votre syst鑝e.\n"
+"\n"
+"Ici sont pr閟ent閟 tous les services disponibles avec l'installation en\n"
+"place. Faites une bonne v閞ification et enlevez tout ce qui n'est pas\n"
+"absolument n閏essaire au d閙arrage du syst鑝e.\n"
"\n"
+"Vous pouvez obtenir une courte explication des services en les\n"
+"s閘ectionnant sp閏ifiquement. Cela dit, si vous n'阾es pas s鹯 de\n"
+"l'application d'un service, conservez les param鑤res par d閒aut.\n"
+"\n"
+"!! cette 閠ape, soyez particuli鑢ement attentif dans le cas d'un syst鑝e\n"
+"destin agir comme serveur. Dans ce cas, vous voudrez probablement\n"
+"permettre exclusivement les services n閏essaires. !!"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Choisissez la connexion que vous voulez configurer"
+msgid "Skip"
+msgstr "Passer"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "carte(s) ethernet d閠ect閑(s)"
+msgid "Niue"
+msgstr "Nioue"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "LAN connection"
-msgstr "Connexion travers un r閟eau local (LAN)"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Gestion group閑 de toutes les connexions r閟eau que vous avez configur閑s et "
+"que vous avez choisi d'activer d鑣 le d閙arrage du syst鑝e. (par ex. vos "
+"connexions pour le r閟eau local et l'ADSL ou le C鈈le). Vous pouvez acc閐er "
+"s閜ar閙ent vos interfaces r閟eau gr鈉e au 珷Centre de Contr鬺e Mandrake牷 "
+"dans la section 珷Internet et r閟eau牷."
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "cable connection detected"
-msgstr "connexion par C鈈le d閠ect閑"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
+"La fr閝uence du processeur en MHz (les m間a hertz sont en premi鑢e\n"
+"approximation le nombre d'instructions ex閏utables par seconde par le\n"
+"processeur)"
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Connexion par c鈈le"
+msgid "important"
+msgstr "important"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected"
-msgstr "d閠ect"
+msgid "Total Progress"
+msgstr "TOTAL:"
-#: ../../network/netconnect.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "ADSL connection"
-msgstr "Connexion par ADSL"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX d閠ecte maintenant tous les p閞iph閞iques IDE pr閟ents sur votre\n"
+"syst鑝e. DrakX recherchera aussi les p閞iph閞iques SCSI. Finalement, selon\n"
+"les composantes d閠ect閑s, DrakX installera tous les pilotes n閏essaires 郳n"
+"son fonctionnement.\n"
+"\n"
+"Compte tenu de la vaste gamme de p閞iph閞iques disponibles sur le march,\n"
+"dans certains cas la d閠ection de mat閞iel ne fonctionnera pas. Si c'est le\n"
+"cas, vous devrez alors configurer votre mat閞iel la main.\n"
+"\n"
+"Si vous devez configurer votre carte SCSI manuellement, DrakX vous\n"
+"demandera si vous souhaitez sp閏ifier la main les options du\n"
+"p閞iph閞ique. Laissez en fait DrakX chercher automatiquement les options\n"
+"n閏essaires la configuration de votre carte, cela fonctionne\n"
+"g閚閞alement.\n"
+"\n"
+"Il peut arriver que DrakX soit incapable de v閞ifier les options\n"
+"n閏essaires. Dans ce cas, vous devrez les d閠erminer manuellement."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected %s"
-msgstr "d閠ect %s"
+msgid "Users"
+msgstr "Utilisateurs..."
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "Connexion par RNIS/ISDN"
+msgid "Aruba"
+msgstr "Aruba"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "Connexion par winmodem"
+msgid "Preparing bootloader..."
+msgstr "Pr閜aration du programme d'amor鏰ge..."
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "detected on port %s"
-msgstr "d閠ect sur le port %s"
+msgid "Gateway (e.g. %s)"
+msgstr "Passerelle (p.ex. %s)"
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Connexion par modem"
+msgid "The passwords do not match"
+msgstr "Les mots de passe ne sont pas identiques"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "D閠ection des p閞iph閞iques..."
+msgid "Examples for correct IPs:\n"
+msgstr "Exemples d'adresses IP correctes:\n"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Expert Mode"
-msgstr "Mode Expert"
+msgid "Frequency (MHz)"
+msgstr "Fr閝uence (MHz)"
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr "Utiliser la d閠ection automatique"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Pour utiliser cette sauvegarde de s閘ection des paquetages, veuillez "
+"red閙arrer l'installation avec la commande 珷linux defcfg=floppy牷."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Choisissez le profil configurer"
+msgid "the number of the processor"
+msgstr "le num閞o du processeur"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenue dans l'assistant de configuration r閟eau.\n"
-"\n"
-"Nous sommes sur le point de configurer votre connexion internet et r閟eau.\n"
-"Si vous ne souhaitez pas utiliser la d閠ection automatique, d閟閘ectionnez "
-"la case correspondante.\n"
+msgid "Hardware clock set to GMT"
+msgstr "Horloge syst鑝e r間l閑 sur le Temps Universel (GMT)"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Comme vous 阾es en train de faire une installation r閟eau,\n"
-" cela veut dire que votre r閟eau est d閖 configur.\n"
-"Cliquez sur <Ok> pour conserver votre configuration,\n"
-"ou sur <Annuler> pour reconfigurer votre connexion internet et r閟eau.\n"
+msgid "Give a file name"
+msgstr "Donnez un nom de fichier"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nous allons maintenant configurer la connexion %s.\n"
-"\n"
-"\n"
-"Cliquez sur OK pour continuer."
+msgid "Please choose the port that your printer is connected to."
+msgstr "Veuillez choisir le port sur lequel votre imprimante est connect閑."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nous allons configurer la connexion %s."
+msgid "Change Cd-Rom"
+msgstr "Changer de CD-Rom"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Connexion internet et configuration"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr "Sauvegardes incr閙entales (閏onomie d'espace)"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "Configurez la connexion"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Il n'y a pas de pilote connu pour votre carte son (%s)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Disconnect"
-msgstr "Se d閏onnecter"
+msgid "force"
+msgstr "forcer"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connect"
-msgstr "Connecter"
+msgid "Exit"
+msgstr "Quitter"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"You can reconfigure your connection."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-"\n"
-"Vous pouvez reconfigurer votre connexion."
+"NOTE: En fonction du mod鑜e et du syst鑝e d'impression, jusqu' %d Mo de "
+"logiciels additionnels seront install閟."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-"\n"
-"Vous pouvez vous connecter Internet ou reconfigurer votre connexion."
+"Vous n'avez aucune interface r閟eau configur閑.\n"
+"Vous pouvez en configurer une en cliquant sur 珷Configurer牷"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Vous n'阾es actuellement pas connect Internet."
+msgid "Estonian"
+msgstr "Estonien"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"\n"
-"Vous pouvez vous d閏onnecter ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Vous 阾es actuellement connect Internet."
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "L'URL doit commencer par 'ftp:' ou 'http:'"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "La syntaxe doit 阾re http://..."
+"Apache est un serveur Web (HTTP). Il est utilis pour faire fonctionner un "
+"site internet."
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "FTP proxy"
-msgstr "Serveur mandataire FTP"
+msgid "Add/Del Clients"
+msgstr "Ajouter/Effacer un client"
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Serveur mandataire HTTP"
+msgid "Choose the network interface"
+msgstr "Choisissez la carte r閟eau"
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
+msgid "Unknown Model"
+msgstr "Mod鑜e inconnu"
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr ""
-"L'adresse de la passerelle doit ressembler quelque chose comme "
-"珷192.168.1.20牷"
+msgid "CD/DVD burners"
+msgstr "Graveurs CD/DVD"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
-"L'adresse du DNS doit ressembler quelque chose comme 珷192.168.1.20牷"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Gateway device"
-msgstr "P閞iph閞ique passerelle"
+"Partition d'amor鏰ge par d閒aut\n"
+"(pour DOS/Windows, pas pour LILO)\n"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Passerelle (p.ex. %s)"
+msgid "choose image"
+msgstr "choisissez l'image"
-#: ../../network/network.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "DNS server"
-msgstr "Serveur DNS"
+msgid "Firewalling configuration detected!"
+msgstr "Configuration du Pare Feu d閠ect閑"
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Veuillez indiquer un nom d'h魌e pour la machine.\n"
-"Celui-ci doit 阾re un nom de machine pleinement qualifi, par exemple:\n"
-"mamachine.monlabo.masociete.com\n"
-"Vous pouvez 間alement indiquer l'adresse IP de la passerelle\n"
-"si votre r閟eau local en poss鑔e une."
+msgid "Connection name"
+msgstr "Nom de la connexion"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Le d閎it doit avoir un suffixe k, M ou G (par ex. \"11M\" pour 11Mo), ou "
-"bien avoir suffisamment de z閞os."
+"coordonn閑s x de la zone de texte\n"
+"en nombre de caract鑢es"
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"La fr閝uence doit avoir un suffixe k, M ou G (par ex. \"2.46G\" pour 2.46 "
-"GHz), ou bien avoir suffisamment de z閞os."
+msgid "Updating package selection"
+msgstr "Mise jour de la s閘ection des paquetages"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adresse IP doit ressembler quelque chose comme 珷192.168.1.20牷"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "O d閟irez-vous monter le fichier de bouclage %s?"
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Start at boot"
-msgstr "Lancer au d閙arrage"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"La disquette a 閠 g閚閞閑 avec succ鑣.\n"
+"Vous pouvez maintenant rejouer votre installation."
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Affecter le nom d'h魌e partir de l'adresse DHCP"
+msgid "the number of buttons the mouse has"
+msgstr "le nombre de boutons que poss鑔e la souris"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "Branchement chaud du r閟eau"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr "Dossier ou module o poser la sauvegarde sur cette machine"
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Suivre l'id. de la carte r閟eau (utile pour les portables)"
+msgid "Replay"
+msgstr "Rejouer"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "DHCP host name"
-msgstr "Nom d'h魌e燚HCP"
+msgid "Backup other files"
+msgstr "Sauvegarde des autres fichiers ou dossiers..."
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Netmask"
-msgstr "Masque de sous-r閟eau"
+msgid "No floppy drive available"
+msgstr "Aucun lecteur de disquette disponible"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP address"
-msgstr "Adresse IP"
+msgid "Backup files are corrupted"
+msgstr "Les fichiers de sauvegarde sont corrompus"
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "BOOTP/DHCP/Zeroconf"
+msgid "TV norm:"
+msgstr "Norme TV:"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automatic IP"
-msgstr "Attribution automatique de l'adresse IP"
+msgid "Cpuid family"
+msgstr "Famille CPUID"
-#: ../../network/network.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (driver %s)"
-msgstr " (pilote %s)"
+msgid "32 MB"
+msgstr "32 Mo"
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuration du p閞iph閞ique r閟eau %s"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituanien (AZERTY, nouveau mod鑜e)"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Veuillez indiquer la configuration IP de cette machine.\n"
-"Chaque champ doit 阾re compl閠 avec une adresse IP en notation\n"
-"d閏imale point閑 (par exemple, 12.34.56.78)."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "\"oui\" signifie que le coprocesseur poss鑔e un vecteur d'exception"
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"ATTENTION: ce p閞iph閞ique a d閖 閠 configur pour la connexion "
-"internet.\n"
-"\n"
-"Cliquez simplement sur 珷OK牷 pour conserver sa configuration.\n"
-"Sinon la configuration actuelle sera 閏ras閑 par les modifications que vous "
-"ferez."
+"Attention, vous avez choisi une partition RAID logiciel comme partition\n"
+"racine (/). Pour que votre syst鑝e puisse d閙arrer, vous devez ajouter\n"
+"une partition non RAID, sp閏ifique pour le dossier /boot."
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Attention! Une configuration existante du Pare-Feu a 閠 d閠ect閑. Vous "
-"devrez peut-阾re modifier la configuration manuellement apr鑣 l'installation."
+msgid "Previous"
+msgstr "<- Pr閏閐ent"
-#: ../../network/shorewall.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Configuration du Pare Feu d閠ect閑"
+msgid "Other OS (MacOS...)"
+msgstr "Autres syst鑝es (MacOS, etc.)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Account Password"
-msgstr "Mot de passe du compte"
+msgid "To activate the mouse,"
+msgstr "Pour activer la souris,"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Nom d'utilisateur du compte"
+msgid "Bringing up the network"
+msgstr "D閙arrage de l'interface r閟eau..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Temps maxi pour 閠ablir la connexion (en sec.)"
+msgid "Screenshots will be available after install in %s"
+msgstr "Les captures d'閏ran seront disponibles apr鑣 l'installation dans %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Connection speed"
-msgstr "Vitesse de connexion"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Plus d'une partition Windows ont 閠 d閠ect閑s sur votre disque dur. SVP,\n"
+"veuillez choisir celle que vous choisissez pour votre nouvelle installation\n"
+"de Mandrake Linux.\n"
+"\n"
+"Chaque partition est identifi閑 comme suit: \"Nom linux\", \"Nom Windows\",\n"
+"\"Capacit閈".\n"
+"\n"
+"Le \"Nom\" est structur ainsi : \"type de disque dur\", \"num閞o du disque\n"
+"dur\", \"num閞o de partition\". Par exemple, 珷hda1牷.\n"
+"\n"
+"Le \"Type de disque dur\" correspond hd si votre disque est IDE. Pour un\n"
+"disque SCSI, vous lirez \"sd\".\n"
+"\n"
+"Le num閞o du disque est toujours list apr鑣 le \"hd\" ou \"fd\". Pour les\n"
+"disques IDE :\n"
+"\n"
+" * \"a\" signifie \"disque primaire ma顃re sur le premier contr鬺eur IDE\";\n"
+"\n"
+" * \"b\" signifie \"disque primaire esclave sur le premier contr鬺eur\n"
+"IDE\";\n"
+"\n"
+" * \"c\" indique \"disque primaire ma顃re sur le second contr鬺eur IDE\";\n"
+"\n"
+" * \"d\" signifie \"disque primaire esclave sur le second contr鬺eur IDE\";\n"
+"\n"
+"Avec les disques SCSI, le \"a\" indique le plus petit SCSI ID, et ainsi de\n"
+"suite.\n"
+"\n"
+"\"Windows name\" c'est la lettre assign閑 votre disque, (le premier\n"
+"disque ou partition \"C:\")"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dialing mode"
-msgstr "Num閞otation"
+msgid "Tanzania"
+msgstr "Tanzanie"
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "Choisissez votre pays"
+msgid "Computing FAT filesystem bounds"
+msgstr "Calcul des limites du syst鑝e de fichiers FAT..."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "2鑝e DNS du fournisseur (optionnel)"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
+"\n"
+"Sources de sauvegarde: \n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "1er DNS du fournisseur (optionnel)"
+msgid "Content of the file"
+msgstr "Contenu du fichier"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "Num閞o de t閘閜hone pour l'acc鑣"
+msgid "Authentication LDAP"
+msgstr "Authentification LDAP"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Fournisseur d'acc鑣 (ex.: fournisseur.fr)"
+msgid "Let me pick any driver"
+msgstr "Choix d'un pilote"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Your personal phone number"
-msgstr "Votre num閞o de t閘閜hone personnel"
+msgid "Profile "
+msgstr "Profil "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 de la carte"
+msgid "transmitted"
+msgstr "transmis"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Card IO_0"
-msgstr "E/S_O de la carte"
+msgid "Palestine"
+msgstr "Palestine"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "E/S de la carte"
+msgid "RAID md%s\n"
+msgstr "Appartient au RAID md%s\n"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Plage m閙oire (DMA)"
+msgid "%d comma separated strings"
+msgstr "%d cha頽es s閜ar閑s par des virgules"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card IRQ"
-msgstr "n IRQ de la carte"
+msgid "Here is the full list of keyboards available"
+msgstr "Voici la liste compl鑤e des claviers disponibles"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Veuillez compl閠er ou v閞ifier les champs ci-dessous"
+msgid "Theme name"
+msgstr "nom du th鑝e"
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Configuration de la connexion"
+msgid "/_Help"
+msgstr "/_Aide"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Le syst鑝e ne semble pas connect Internet.\n"
-"Essayez de reconfigurer votre connexion."
+"Vous pouvez ici choisir si les scanners connect閟 cette machine doivent "
+"阾re accessibles depuis des machines distantes, et quelles machines pourront "
+"y acc閐er."
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Pour des raisons de s閏urit, il va 阾re d閏onnect maintenant."
+msgid "the width of the progress bar"
+msgstr "la largeur de la barre de progression"
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Le syst鑝e est pr閟ent connect Internet."
+msgid "Cook Islands"
+msgstr "蝜es Cook"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "Test de votre connexion..."
+msgid "Formatting partition %s"
+msgstr "Formatage de la partition %s"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Souhaitez-vous vous connecter Internet maintenant?"
+msgid "Hostname required"
+msgstr "Nom de machine爊閏essaire"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Internet configuration"
-msgstr "Configuration de l'acc鑣 Internet"
+msgid "Unselect fonts installed"
+msgstr "D閟閘ectionner les polices install閑s"
-#: ../../partition_table/raw.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Votre disque dur semble avoir un probl鑝e mat閞iel:\n"
-"un test pour v閞ifier son aptitude conserver l'int間rit des donn閑s a "
-"閏hou.\n"
-"Cela signifie que serez victime de pertes al閍toires de donn閑s."
+msgid "Cancel"
+msgstr "Annuler"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " (Default)"
-msgstr " (D閒aut)"
+msgid "Searching for configured scanners ..."
+msgstr "Recherche de scanners configur閟..."
-#: ../../printer/cups.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sur serveur CUPS 珷%s牷"
+msgid "Wheel"
+msgstr "Roulette"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "Imprimantes distantes"
+msgid "Videocard"
+msgstr "Carte vid閛"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tLe sauvegarde utilise 珷tar牷 et 珷bzip2牷\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "(on this machine)"
-msgstr "(sur cette machine)"
+msgid "Remove Selected"
+msgstr "Supprimer s閘ection"
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
+msgid "/Autodetect _modems"
+msgstr "/Auto-d閠ecter les _modems"
-#: ../../printer/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "Remove printer"
+msgstr "D閟installer l'imprimante"
-#: ../../printer/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ATTENTION!\n"
+"\n"
+"La taille de votre partition Windows va maintenant 阾re r閐uite.\n"
+"\n"
+"Soyez prudent: cette op閞ation est dangereuse. Si ce n'est pas d閖郳n"
+"fait, vous devriez tout d'abord sauvegarder vos donn閑s et lancer les\n"
+"programmes 珷scandisk牷 et 珷defrag牷 (fournis avec Windows)\n"
+"sur cette partition.\n"
+"\n"
+"Si vous 阾es s鹯 de vous, cliquez sur OK."
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nouvelle G閚閞ation"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "Quels services souhaitez-vous laisser accessible depuis internet?"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"Bienvenue dans l'utilitaire de configuration des alertes par courrier.\n"
+"\n"
+"Vous allez pouvoir configurer ici vos les alertes syst鑝es.\n"
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Other"
+msgstr "Autre"
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Default"
+msgstr "Choix par d閒aut"
-#: ../../printer/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Button 2 Emulation"
+msgstr "蒻ulation du bouton n 2"
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown Model"
-msgstr "Mod鑜e inconnu"
+msgid "type1inst building"
+msgstr "construction par type1inst"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown model"
-msgstr "Mod鑜e inconnu"
+msgid "Abiword"
+msgstr "Abiword"
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid "choose image file"
+msgstr "choisissez un fichier image"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Host %s"
-msgstr "H魌e%s"
+msgid "X server"
+msgstr "serveur XFree"
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network %s"
-msgstr "R閟eau %s"
+msgid "Domain Admin User Name"
+msgstr "Nom d'administrateur de domaine"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "Interface \"%s\""
+msgid "There was an error while scanning for TV channels"
+msgstr "Une erreur est survenue pendant la recherche des cha頽es TV."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "R閟eaux locaux"
+msgid "US keyboard (international)"
+msgstr "Am閞icain (international)"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Imprimante acc鑣 direct (pas de pilote)"
+msgid "Not installed"
+msgstr "Non install"
-#: ../../printer/main.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", en utilisant la commande %s"
+msgid "LAN connection"
+msgstr "Connexion travers un r閟eau local (LAN)"
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " sur serveur Novell 珷%s牷, imprimante 珷%s牷"
+msgid "/File/-"
+msgstr "/Fichier/-"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " sur serveur Windows 珷%s牷, partage 珷%s牷"
+msgid "Italian"
+msgstr "Italien"
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", h魌e TCP/IP 珷%s牷, port 珷%s牷"
+msgid "Basic"
+msgstr "Basique"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " sur serveur d'impression LPD 珷%s牷, imprimante 珷%s牷"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Copyright (C) 2002 par MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", impression sur %s"
+msgid "Honduras"
+msgstr "Honduras"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", p閞iph閞ique multifonction"
+msgid "pdq"
+msgstr "pdq"
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", p閞iph閞ique HP JetDirect multifonction"
+msgid "Card IO"
+msgstr "E/S de la carte"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ", p閞iph閞ique USB multifonction"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
+"une fois v閞ifi閟, le propri閠aire et le groupe ne seront plus modifi閟"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", p閞iph閞ique multifonction sur le port parall鑜e %s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Cette partition d'amor鏰ge (bootstrap)\n"
+"est n閏essaire si vous avez plusieurs\n"
+"syst鑝es d'exploitation. \n"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", USB printer"
-msgstr ", imprimante USB"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"Veuillez choisir, pour chaque 閠ape, si celle-ci doit 阾re rejou閑 comme "
+"pendant votre installation, ou si elle doit s'effectuer manuellement."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", imprimante USB %s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"Vous pouvez aussi d閏ider ici si les scanners des machines distantes seront "
+"rendus disponibles sur cette machine."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr " sur port parall鑜e %s"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-celle par transfert FTP.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Printers"
-msgstr "Imprimantes locales"
+msgid "Russian (Yawerty)"
+msgstr "Russe (Yawerty)"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr "Impression vers une commande shell"
+msgid "You must enter a device or file name!"
+msgstr "Vous devez enter un nom de fichier ou de p閞iph閞ique!"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enter a printer device URI"
-msgstr "Indiquer l'adresse du p閞iph閞ique d'impression"
+msgid "/_Quit"
+msgstr "/_Quitter"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Printer on NetWare server"
-msgstr "Imprimante sur serveur NetWare"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"Vous avez besoin du microcode d'Alcatel.\n"
+"T閘閏hargez-le 郳n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"et copiez le fichier mgmt.o dans /usr/share/speedtouch"
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Imprimante sur serveur SMB (Windows 95/98/NT)"
+msgid "Graphics memory: %s kB\n"
+msgstr "M閙oire vid閛: %s爇o\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Imprimante r閟eau autonome (TCP/Socket)"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"Ce programme est un logiciel libre: vous pouvez le redistribuer\n"
+"et/ou le modifier selon les termes de la 珷GNU General Public\n"
+"License牷, tels que publi閟 par la 珷Free Software Foundation牷; soit\n"
+"la version 2 de cette licence ou (selon votre choix) toute version\n"
+"ult閞ieure.\n"
+"\n"
+"Ce programme est distribu dans l'espoir qu'il sera utile, mais\n"
+"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans m阭e les\n"
+"garanties de commercialisation ou d'adaptation dans un but sp閏ifique.\n"
+"Se r閒閞er la 珷GNU General Public License牷 pour plus de d閠ails.\n"
+"\n"
+"Vous devriez avoir re鐄 une copie de la 珷GNU General Public License牷\n"
+"en m阭e temps que ce programme; sinon, 閏rivez la 珷Free Software\n"
+"Foundation牷, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, "
+"USA.\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Imprimante sur serveur LPD distant"
+msgid "access to compilation tools"
+msgstr "acc鑣 aux outils de compilation"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Imprimante sur serveur CUPS distant"
+msgid "Please select data to restore..."
+msgstr "Veuillez choisir les donn閑s restaurer..."
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Imprimante distante"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Si vous voulez utiliser 珷aboot牷, vous devez r閟erver\n"
+"un espace libre (d'au moins 2048 secteurs) au d閎ut du disque."
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Imprimante locale"
+msgid "Standard test page"
+msgstr "Page de test standard"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "Configuration des applications..."
+msgid "Create"
+msgstr "Cr閑r"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "What"
+msgstr "Quoi..."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Suppression de l'imprimante 珷%s牷..."
+msgid "There was an error ordering packages:"
+msgstr "Erreur lors du tri des paquetages:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "D閟irez-vous vraiment d閟installer l'imprimante 珷%s牷?"
+msgid "Bulgarian (BDS)"
+msgstr "Bulgare (BDS)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove printer"
-msgstr "D閟installer l'imprimante"
+msgid "Disable Server"
+msgstr "D閟activer le serveur"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr "Savoir comment utiliser cette imprimante"
+msgid "Filesystem encryption key"
+msgstr "Clef de chiffrement du syst鑝e de fichiers"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "Imprimer des pages de test"
+msgid "Gujarati"
+msgstr "Gujarati"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "Impossible de retirer l'imprimante 珷%s牷 de StarOffice/OpenOffice"
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Veuillez choisir le premier nombre du groupe de 10 que vous\n"
+"souhaitez modifier, ou appuyez juste sur <Entr閑> pour continuer.\n"
+"Votre choix? "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "L'imprimante 珷%s牷 a 閠 retir閑 avec succ鑣 de StarOffice/OpenOffice"
+msgid "Save theme"
+msgstr "sauvegarder le th鑝e"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Retrait de l'imprimante de StarOffice/OpenOffice"
+msgid "group"
+msgstr "groupe"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Retirer cette imprimante de StarOffice/OpenOffice"
+msgid "Brazil"
+msgstr "Br閟il"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "Impossible d'ajouter l'imprimante 珷%s牷 StarOffice/OpenOffice"
+msgid "Auto Install"
+msgstr "Installation automatique"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "L'imprimante 珷%s牷 a 閠 ajout閑 avec succ鑣 StarOffice/OpenOffice"
+msgid "Network Configuration Wizard"
+msgstr "Assistant de configuration r閟eau"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ajout de l'imprimante StarOffice/OpenOffice"
+msgid "Removable media automounting"
+msgstr "Auto-montage des p閞iph閞iques amovibles"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ajouter cette imprimante StarOffice/OpenOffice"
+msgid "Printing"
+msgstr "Impression"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "L'imprimante 珷%s牷 est maintenant celle par d閒aut."
+msgid "Unkown driver"
+msgstr "Pilote inconnu"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Default printer"
-msgstr "Imprimante par d閒aut"
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+"Aucune des imprimantes trouv閑s n'est directement reli閑 votre machine"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "Choisir comme imprimante par d閒aut"
+msgid "Create a new partition"
+msgstr "Cr閑r une nouvelle partition"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printer options"
-msgstr "Options de l'imprimante"
+msgid "Driver:"
+msgstr "Pilote:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Marque, mod鑜e"
+msgid "unknown"
+msgstr "inconnu"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Marque, mod鑜e, pilote"
+msgid "Use fdisk"
+msgstr "Utiliser fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "D閟installation de l'ancienne imprimante 珷%s牷..."
+msgid "MOVE YOUR WHEEL!"
+msgstr "VEUILLEZ FAIRE TOURNER LA MOLETTE!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "Nom, description, emplacement"
+msgid "sent: "
+msgstr "envoy閟: "
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "Type de connexion"
+msgid "Automatic IP"
+msgstr "Attribution automatique de l'adresse IP"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Raw printer"
-msgstr "Imprimante acc鑣 direct"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"Votre installation de Mandrake Linux est maintenant termin閑 et votre\n"
+"syst鑝e est pr阾 阾re utilis. Cliquez sur 珷%s牷 pour red閙arrer votre\n"
+"syst鑝e. Vous aurez alors le choix de d閙arrer GNU/Linux ou Windows (s'il\n"
+"est pr閟ent).\n"
+"\n"
+"Le bouton 珷%s牷 (en mode Expert uniquement) permet deux autres options :\n"
+"\n"
+" * 珷%s牷: Pour cr閑r une disquette d'installation qui permettra de\n"
+"reproduire l'installation que vous venez de r閍liser sans l'aide d'un\n"
+"administrateur.\n"
+"\n"
+" Notez que les deux options suivantes apparaissent apr鑣 avoir cliqu sur\n"
+"le bouton :\n"
+"\n"
+" * 珷%s牷. C'est une installation partiellement automatique o il est\n"
+"possible de personnaliser le partitionnement du disque (exclusivement).\n"
+"\n"
+" * 珷%s牷. Compl鑤ement automatique, cette installation reformate le\n"
+"disque au complet.\n"
+"\n"
+" Cette fonctionnalit est particuli鑢ement pratique pour l'installation\n"
+"de multiples syst鑝es. Voir la section Auto install de notre site Web.\n"
+"\n"
+" * 珷%s牷 (*) sauve la s閘ection des paquetages install閟. Puis, lorsque\n"
+"vous ferez une autre installation, ins閞ez la disquette dans le lecteur et\n"
+"acc閐ez au menu d'aide en tapant [f1], et entrez la commande suivante :\n"
+"珷linux defcfg=\"floppy\"牷.\n"
+"\n"
+"(*) Vous avez besoin d'une disquette format閑 avec FAT (pour la cr閑r sous\n"
+"Linux, tapez 珷mformat a:牷)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do it!"
-msgstr "Faire"
+msgid "Configuration of a remote printer"
+msgstr "Configuration d'une imprimante distante"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Close"
-msgstr "Fermer"
+msgid "Moldova"
+msgstr "R閜ublique de Moldova"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+msgid "Please check if you want to erase your tape before the backup."
msgstr ""
-"Imprimante %s\n"
-"Que souhaitez-vous modifier sur cette imprimante?"
+"蕋es-vous s鹯 de vouloir effacer votre bande magn閠ique avant de faire la "
+"sauvegarde."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Modify printer configuration"
-msgstr "Modifier la configuration de l'imprimante"
+msgid "An online platform to respond to enterprise support needs."
+msgstr "Une plate-forme en ligne pour r閜ondre aux besoins des entreprises."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Add a new printer"
-msgstr "Ajouter une nouvelle imprimante"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "L'URL doit commencer par 'ftp:' ou 'http:'"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Normal Mode"
-msgstr "Mode normal"
+msgid "Add a new rule at the end"
+msgstr "Ajouter une nouvelle r鑗le la fin"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Change the printing system"
-msgstr "Changer le syst鑝e d'impression"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"Vous pouvez aussi d閏ider ici si les imprimantes des machines distantes "
+"seront rendues automatiquement disponibles sur cette machine."
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "CUPS configuration"
-msgstr "Configuration de CUPS"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Vous pouvez maintenant pr閏iser les options du module %s.\n"
+"Les options sont de la forme 珷nom=valeur nom2=valeur2 ...牷.\n"
+"Par exemple, 珷io=0x300 irq=7牷"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Rafra頲hir la liste des imprimantes (pour afficher toutes les imprimantes "
-"CUPS distantes)"
+msgid "Quit without writing the partition table?"
+msgstr "D閟irez-vous r閑llement quitter sans 閏rire la table des partitions?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Afficher toutes les imprimantes CUPS distantes"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les imprimantes suivantes sont configur閑s. Cliquez sur l'une d'entre elles "
-"pour modifier ses param鑤res, en faire l'imprimante par d閒aut ou consulter "
-"les informations son propos."
+msgid "Installing packages..."
+msgstr "Installation des paquetages..."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "Syst鑝e d'impression: "
+msgid "Dutch"
+msgstr "Hollandais"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Checking installed software..."
-msgstr "V閞ification du logiciel install..."
+msgid "The following packages need to be installed:\n"
+msgstr "Les paquetages suivants doivent 阾re install閟:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installation de Foomatic..."
+msgid "Angola"
+msgstr "Angola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "蒫hec de configuration de l'imprimante 珷%s牷!"
+msgid "service setting"
+msgstr "configuration des services"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Configuration en cours de l'imprimante 珷%s牷..."
+msgid "Custom"
+msgstr "Personnalis"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "Lecture des donn閑s de l'imprimante..."
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
+"Ce fichier est d閖 utilis par un bouclage.\n"
+"Veuillez en choisir un autre."
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quel syst鑝e d'impression d閟irez-vous utiliser?"
+msgid "Read-only"
+msgstr "Prot間 en lecture"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select Printer Spooler"
-msgstr "Choisissez le gestionnaire d'impression"
+msgid "Latvia"
+msgstr "Lettonie"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "Configuration de l'imprimante par d閒aut..."
+msgid "No known driver"
+msgstr "Aucun pilote connu"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "Installation de %s ..."
+msgid "1 MB"
+msgstr "1 Mo"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Removing %s ..."
-msgstr "Suppression de %s ..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
+"si ce n'est pas celle que vous voulez configurer, tapez un nom de fichier ou "
+"de p閞iph閞ique dans le champ d'entr閑"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-"Le syst鑝e d'impression (%s) ne sera pas activ automatiquement lors du "
-"d閙arrage de la machine.\n"
+"Aucune carte son n'a 閠 d閠ect閑 sur votre ordinateur. Veuillez v閞ifier "
+"qu'une carte son support閑 par Linux est correctement branch閑.\n"
"\n"
-"Il est possible que l'activation automatique ait 閠 supprim閑 par "
-"l'utilisation d'un plus grand niveau de s閏urit, car les syst鑝es "
-"d'impression sont des cibles potentielles d'attaque.\n"
"\n"
-"Souhaitez-vous r閠ablir l'activation automatique du syst鑝e d'impression?"
+"Vous pouvez visiter notre base de donn閑s de support mat閞iel 酄:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Activation du syst鑝e d'impression au d閙arrage"
+msgid "Configure Local Area Network..."
+msgstr "Configurer le r閟eau local..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Vous 阾es sur le point d'installer le syst鑝e d'impression %s sur un syst鑝e "
-"dont le niveau de s閏urit est r間l sur 珷%s牷.\n"
-"\n"
-"Ce syst鑝e d'impression 閏oute en permanence le r閟eau afin de r閜ondre aux "
-"requ阾es d'impression. Ceci se fait gr鈉e un service qui tourne en t鈉he "
-"de fond (daemon) et qui est accessible par les autres machines du r閟eau. "
-"C'est donc une cible possible pour des attaques r閟eau 関entuelles. C'est "
-"pourquoi le minimum possible de 珷daemons牷 doivent 阾re d閙arr閟 dans ce "
-"niveau de s閏urit.\n"
-"\n"
-"Souhaitez-vous r閑llement installer un syst鑝e d'impression?"
+msgid "Launch the sound system on your machine"
+msgstr "D閙arrer le syst鑝e de gestion du son sur votre machine."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation du syst鑝e d'impression sous le niveau de s閏urit 珷%s牷"
+msgid "Preparing printer database..."
+msgstr "Pr閜aration de la base de donn閑s des imprimantes..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "paranoid"
-msgstr "parano颽que"
+msgid "Information"
+msgstr "Informations"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "high"
-msgstr "閘ev"
+msgid "No network card"
+msgstr "Aucune carte r閟eau"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "Restarting printing system..."
-msgstr "Red閙arrage du syst鑝e d'impression..."
+msgid "Which filesystem do you want?"
+msgstr "Quel syst鑝e de fichiers d閟irez-vous utiliser?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Configuration d'une imprimante distante"
+msgid "3 buttons"
+msgstr "3 boutons"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L'acc鑣 r閟eau n'a pas pu 阾re d閙arr. Veuillez v閞ifier la configuration "
-"de votre mat閞iel et de votre acc鑣 r閟eau gr鈉e au 珷Centre de Contr鬺e "
-"Mandrake牷 puis essayez nouveau de configurer l'imprimante distante."
+msgid "Detailed information"
+msgstr "Informations d閠aill閑s"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Malte"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-"L'interface r閟eau qui a 閠 configur閑 pendant l'installation ne peut pas "
-"阾re d閙arr閑 maintenant. Veuillez v閞ifier si votre r閟eau est activ apr鑣 "
-"d閙arrage. D閙arrez le 珷Centre de Contr鬺e Mandrake牷, v閞ifiez la "
-"configuration dans la section 珷r閟eau et internet / connexion牷. Puis "
-"essayez nouveau de configurer l'imprimante dans la section 珷Mat閞iel / "
-"Imprimante牷."
+"Param閠rage de l'imprimante par d閒aut.\n"
+"\n"
+"Assurez-vous que la taille de la page et le type d'encre (si disponible) "
+"sont correctement indiqu閟. Notez que la vitesse d'impression peut diminuer "
+"si vous augmentez la qualit d'impression."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr "Configurez le r閟eau maintenant"
+msgid "This floppy is not FAT formatted"
+msgstr "Cette disquette n'est pas au format DOS/Windows"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Go on without configuring the network"
-msgstr "Continuer sans configurer le r閟eau"
+msgid "Configuring network"
+msgstr "Configuration du r閟eau"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Vous 阾es sur le point de configurer une imprimante distante. Cela n閏essite "
-"un acc鑣 au r閟eau, mais votre r閟eau n'est pas encore configur. Si vous "
-"voulez continuer sans configurer le r閟eau, vous ne pourrez pas utiliser "
-"l'imprimante que vous 阾es en train de configurer. Que souhaitez-vous faire?"
+msgid "Graphic Card"
+msgstr "Carte graphique"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Network functionality not configured"
-msgstr "Les fonctions du r閟eau ne sont pas configur閑s"
+msgid "Resizing Windows partition"
+msgstr "Calcul des limites du syst鑝e de fichiers de Windows en cours"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Starting network..."
-msgstr "D閙arrage du r閟eau..."
+msgid "Provider dns 1 (optional)"
+msgstr "1er DNS du fournisseur (optionnel)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "Mise jour des donn閑s de l'imprimante..."
+msgid "Cameroon"
+msgstr "Cameroun"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-"Vous avez transf閞 votre pr閏閐ente imprimante par d閒aut (珷%s牷). Doit-"
-"elle 阾re 間alement l'imprimante par d閒aut de votre nouveau syst鑝e "
-"d'impression %s?"
+"Vous pouvez maintenant partitionner %s.\n"
+"\n"
+"Lorsque vous aurez termin, n'oubliez pas d'enregistrer vos\n"
+"modifications en appuyant sur la touche 珷w牷."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "Transfert de la configuration de l'imprimante"
+msgid "Close"
+msgstr "Fermer"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "Transfert de %s..."
+msgid ""
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
+msgstr ""
+"珷%s牷: v閞ifiez la section du pays. Si vous ne vous trouvez pas dans ce\n"
+"pays, cliquez sur le bouton 珷%s牷 et choisissez le bon. Si votre pays ne\n"
+"se trouve pas dans la premi鑢e liste, cliquez sur 珷%s牷 pour avoir la\n"
+"liste compl鑤e."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "New printer name"
-msgstr "Nouveau nom de l'imprimante"
+msgid "Calendar"
+msgstr "Calendrier"
-#: ../../printer/printerdrake.pm:1
+# whom is selected, the entry or the catalog?
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"L'imprimante 珷%s牷 existe d閖,\n"
-"souhaitez-vous vraiment 閏raser sa configuration?"
+"R閠ablir l'entr閑\n"
+"du catalogue choisi."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-"Le nom de l'imprimante ne devrait contenir que des lettres, des nombres et "
-"des tirets bas (_)"
+"Pour utiliser une imprimante Unix distante, vous devez indiquer le nom "
+"d'h魌e du serveur LPD et le nom attribu l'imprimante par ce serveur."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "Transfert"
+msgid "Iceland"
+msgstr "Islande"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Une imprimante nomm閑 珷%s牷 existe d閖 sous %s.\n"
-"Cliquez sur 珷Transfert牷 pour la remplacer.\n"
-"Vous pouvez 間alement taper un nouveau nom ou\n"
-"simplement ignorer cette imprimante."
+msgid "consolehelper missing"
+msgstr "le programme 珷consolehelper牷 est introuvable"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr "Ne pas transf閞er les imprimantes"
+msgid "stopped"
+msgstr "arr阾"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Cochez les imprimantes que vous voulez transf閞er, et\n"
-"cliquez sur 珷Transfert牷."
+msgid "Whether the FPU has an irq vector"
+msgstr "Est-ce que le FPU a un vecteur d'IRQ"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Ext2"
+msgstr "Ext2"
+
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "D関elopper l'arborescence"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
+"L'ancien pilote 珷%s牷 est sur liste noire.\n"
"\n"
-"Aussi, les imprimantes configur閑s avec les fichiers PPD fournis par leur "
-"fabriquant ou avec des pilotes CUPS natifs ne peuvent pas 阾re transf閞閑s."
+"Plusieurs personnes ont rapport des probl鑝es avec le noyau lors de son "
+"arr阾.\n"
+"\n"
+"Le nouveau pilote 珷%s牷 ne sera utilis qu'au prochain d閙arrage."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"De plus, les files d'attente qui n'ont pas 閠 cr殚es avec ce programme ou "
-"avec 玣oomatic-configure ne peuvent pas 阾re transf閞閑s."
+msgid "Expert Mode"
+msgstr "Mode Expert"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD et LPRng ne supportent pas les imprimantes IPP.\n"
+msgid "Printer options"
+msgstr "Options de l'imprimante"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ne supporte que les imprimantes locales, les imprimantes LPD distantes, "
-"et les imprimantes r閟eau autonomes.\n"
+msgid "Local Network adress"
+msgstr "Adresse de R閟eau Local"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne supporte pas les imprimantes sur les serveurs Novell ni les "
-"impressions vers des commandes shell.\n"
+msgid "Backup your System files. (/etc directory)"
+msgstr "Sauvegarder vos fichiers syst鑝e (dossier /etc)"
-#: ../../printer/printerdrake.pm:1
+# I added an example (install on a networked machine, and the server is connected to the Internet).
+# / J'ai rajout un exemple (voir texte) car cela me semble plus clair comme 玎.
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-"Vous pouvez copier la configuration de l'imprimante faite pour le "
-"gestionnaire %s vers votre gestionnaire actuel %s. Toutes les donn閑s de "
-"configuration (nom de l'imprimante, description, emplacement, type de "
-"connexion, et param鑤res par d閒aut) sont r閏up閞閑s, mais les travaux ne "
-"seront pas transf閞閟.\n"
-"Toutes les files d'attente n'ont pas pu 阾re transf閞閑s cause des raisons "
-"suivantes:\n"
+"Vous avez maintenant la possibilit de t閘閏harger les mises jour\n"
+"cr殚es depuis la sortie de cette distribution. Il peut y avoir des "
+"correctifs de\n"
+" s閏urit ou des r閟olutions de bogues.\n"
+"\n"
+"Vous devez avoir une connexion internet pour les t閘閏harger,\n"
+"\n"
+"Souhaitez-vous installer les mises jour?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Votre imprimante HP a 閠 configur閑 automatiquement pour vous donner acc鑣 "
-"aux lecteurs de carte m閙oire partir de votre PC. Maintenant vous pouvez "
-"acc閐er vos cartes en utilisant le programme graphique "
-"珷MtoolsFM牷 (Menu: 珷Applications牷 -> 珷Outils fichiers牷 -> "
-"珷gestionnaire de fichiers MTools牷) ou le programme en ligne de commande "
-"mtools (tapez 珷man mtools牷 pour plus d'infos). Vous acc閐erez la carte "
-"par le lecteur ayant la lettre 珷p:牷, ou une autre lettre si vous avez plus "
-"d'un appareil de ce type. Dans 珷MtoolsFM牷 vous pouvez commuter entre "
-"plusieurs lecteurs gr鈉e au champ situ dans le coin sup閞ieur droit de la "
-"liste de fichiers."
+msgid "Samba Server"
+msgstr "Serveur Samba"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Do not use \"scannerdrake\" for this device!"
+"Enable/Disable IP spoofing protection."
msgstr ""
-"Votre p閞iph閞ique multifonction HP a 閠 configur automatiquement pour "
-"阾re capable de scanner. Maintenant vous pouvez scanner avec "
-"珷scanimage牷 ( 珷scanimage -d hp:%s牷 pour sp閏ifier le scanner si vous en "
-"avez plus d'un) partir de la ligne de commande, ou avec des interfaces "
-"graphiques comme 珷xscanimage牷 ou 珷xsane牷. Si vous utilisez 珷Le Gimp牷, "
-"vous pouvez aussi scanner gr鈉e au menu 珷Fichier / Acquisition牷. Pour "
-"avoir plus d'information, vous pouvez taper 珷man scanimage牷 dans une "
-"fen阾re de commandes.\n"
+"Arguments: (arg, alerte=1)\n"
"\n"
-"N'utilisez pas 珷scannerdrake牷 pour cet appareil! "
+"Active/D閟active la protection contre l'usurpation d'adresse IP (IP "
+"spoofing)."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Impression des pages de test..."
+msgid "Australian Optus cable TV"
+msgstr "C鈈le TV australien Optus"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "Print option list"
-msgstr "Liste des options d'impression"
+msgid ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr ""
+"<Tab> suivant | <Alt-Tab> pr閏閐ent | <Espace> s閘ectionner | <F12> 蒫ran "
+"suivant "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Impression sur l'imprimante 珷%s牷"
+msgid "Subnet:"
+msgstr "Sous-r閟eau:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Impression/Acc鑣 aux cartes photos sur 珷%s牷"
+msgid "Zimbabwe"
+msgstr "Zimbabwe"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Impression/Acquisition sur l'imprimante 珷%s牷"
+msgid "Please enter the host name or IP."
+msgstr "Nom d'h魌e ou adresse IP de la machine de sauvegarde"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Impression/Acquisition/Cartes photo sur 珷%s牷"
+msgid "When"
+msgstr "Quand..."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Pour obtenir la liste des param鑤res disponibles pour l'imprimante courante, "
-"lisez la liste ci-dessous ou cliquez sur le bouton 珷imprimer la liste des "
-"options牷.%s%s\n"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "serveur DNS secondaire (optionnel)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finlande"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Les commandes 珷%s牷 et 珷%s牷 permettent 間alement de modifier les "
-"param鑤res d'impression pour une impression particuli鑢e. Il suffit pour "
-"cela d'ajouter les param鑤res voulus sur la ligne de commande, par exemple "
-"珷%s <fichier>牷.\n"
+"Autorise tous les services contr鬺閟 par tcp_wrappers (voir hosts.deny(5)) "
+"si 珷arg牷 = ALL. Seulement ceux qui sont locaux si\n"
+"珷arg牷 = LOCAL et aucun si 珷arg牷 = NONE. Pour autoriser les services "
+"dont vous avez besoin, utilisez /etc/hosts.allow\n"
+"(voir hosts.allow(5))."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vous pouvez 間alement utiliser l'interface graphique 珷xpdq牷 pour "
-"positionner des options d'impression et administrer les travaux "
-"d'impression.\n"
-"Si vous utiliser le bureau KDE, vous disposez d'un 珷bouton panique牷, une "
-"ic鬾e sur le bureau, nomm 珷STOP Imprimante!牷, qui peut suspendre tous "
-"les travaux d'impression. Ceci peut 阾re utile en cas de bourrage papier, "
-"par exemple.\n"
+msgid "Color depth: %s\n"
+msgstr "Nombre de couleurs: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "You can't unselect this package. It must be upgraded"
msgstr ""
-"Cette commande peut 間alement 阾re utilis閑 dans le champ 珷commande "
-"d'impression牷 des bo顃es de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas, n'indiquez pas le nom du fichier imprimer "
-"puisque celui-ci sera fourni par l'application elle-m阭e.\n"
+"Vous ne pouvez pas d閟閘ectionner ce paquetage, il doit 阾re mis jour."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fen阾re de "
-"terminal), utilisez la commande 珷%s <fichier>牷 ou 珷%s <fichier>牷.\n"
+msgid "Loading from floppy"
+msgstr "Chargement depuis la disquette..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"Pour obtenir la liste des param鑤res disponibles pour l'imprimante courante, "
-"cliquez sur le bouton 珷liste des options d'impression牷."
+"Drakperm permet de voir les fichiers utiliser pour corriger des "
+"permissions, propri閠aire et groupe gr鈉e msec.\n"
+"Vous pouvez aussi 閐iter vos propres r鑗les, prioritaires devant celles par "
+"d閒aut."
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"La commande 珷%s牷 permet 間alement de modifier les param鑤res d'impression "
-"pour une impression particuli鑢e. Il suffit pour cela d'ajouter les "
-"param鑤res voulus sur la ligne de commande. Par exemple, 珷%s <fichier>牷. "
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fen阾re de "
-"terminal), utilisez la commande 珷%s<fichier>.\n"
+msgid "Slovenia"
+msgstr "Slov閚ie"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Enter a user\n"
+"%s"
msgstr ""
-"Voici la listes des options d'impression disponibles pour l'imprimante "
-"courante:\n"
-"\n"
+"Cr閑r un compte utilisateur\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"Vous pouvez 間alement utiliser ces commandes dans le champ 珷commande "
-"d'impression牷 des bo顃es de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas n'indiquez pas le nom du fichier puisqu'il sera "
-"fourni par l'application elle-m阭e.\n"
+"- p閞iph閞iques PCI et USB: liste des identifiants vendeur, p閞iph閞iques, "
+"sous-vendeur, et sous-p閞iph閞iques PCI/USB"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "ProgressBar color selection"
+msgstr "S閘ection de couleur de la barre de progression"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fen阾re de "
-"terminal), vous pouvez soit utiliser la commande 珷%s <fichier>牷 ou un "
-"utilitaire d'impression graphique: 珷xpp <fichier>牷 ou 珷kprinter "
-"<fichier>牷. Les utilitaires graphiques vous permettent de choisir "
-"l'imprimante et de modifier les param鑤res d'impression facilement.\n"
+"Voici les diff閞entes entr閑s.\n"
+"Vous pouvez en ajouter de nouvelles ou modifier les entr閑s existantes."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "蕋es-vous satisfait du r閟ultat?"
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Les pages de test ont 閠 envoy閑s l'imprimante.\n"
-"Il peut se passer un certain temps avant le d閎ut effectif de l'impression.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-"Les pages de test ont 閠 envoy閑s l'imprimante.\n"
-"Il peut se passer un certain temps avant le d閎ut effectif de l'impression.\n"
-"Statut de l'impression:\n"
-"%s\n"
-"\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "Ne pas imprimer de page de test"
+"Service qui permet de d閙arrer une t鈉he une heure pr閏ise. Chaque t鈉he "
+"doit 阾re cr殚e par la commande 珷at牷, puis, a l'heure dite, le service "
+"珷atd牷 lance cette t鈉he. Par exemple pour 閠eindre automatiquement la "
+"machine ce soir 23h59, tapez 珷at 23:59牷 dans une fen阾re de commande, "
+"puis 珷halt牷 et <Ctrl-D>."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Photo test page"
-msgstr "Page de test photo"
+msgid "Radio support:"
+msgstr "Support de la radio:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Page de test alternative (A4)"
+msgid "Installing SANE packages..."
+msgstr "Installation des paquetages SANE..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Page de test alternative (Letter)"
+msgid "boot disk creation"
+msgstr "cr閍tion d'une disquette d'amor鏰ge"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Standard test page"
-msgstr "Page de test standard"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Print"
-msgstr "Imprimer"
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "No test pages"
-msgstr "Pas de page de test"
+msgid "Change type"
+msgstr "Changer le type"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Merci de s閘ectionner les pages de test que vous voulez imprimer.\n"
-"Note: la page de test photo peut prendre un temps assez long pour "
-"s'imprimer, et sur les imprimantes laser avec trop peu de m閙oire, elle peut "
-"m阭e ne pas sortir.\n"
-"Dans la plupart des cas, l'impression de la page de test standard suffit."
+msgid "SILO Installation"
+msgstr "Installation de SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Test pages"
-msgstr "Pages de test"
+msgid "Use CD/DVDROM to backup"
+msgstr "Sauvegarder sur CDR (ou DVDR)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"D閟irez-vous que l'imprimante 珷%s牷 soit l'imprimante\n"
-"par d閒aut?"
+"F閘icitations, l'installation est termin閑.\n"
+"Enlevez la disquette ou le CD-Rom d'amor鏰ge et appuyez sur 珷Entr閑牷.\n"
+"\n"
+"\n"
+"Pour toutes informations sur les corrections disponibles pour cette version "
+"de Mandrake Linux, consultez les Errata disponibles depuis:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Des informations sur la configuration de votre syst鑝e sont \n"
+"disponibles dans le Guide de l'Utilisateur de Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "L'option %s est en dehors des limites!"
+msgid "paranoid"
+msgstr "parano颽que"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'option %s 阾re un nombre!"
+msgid "Send mail report after each backup to:"
+msgstr "Envoyer un rapport par courriel apr鑣 chaque sauvegarde 酄:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'option %s doit 阾re un nombre entier!"
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Cette commande peut 間alement 阾re utilis閑 dans le champ 珷commande "
+"d'impression牷 des bo顃es de dialogue d'impression dans de nombreuses "
+"applications. Dans ce cas, n'indiquez pas le nom du fichier imprimer "
+"puisque celui-ci sera fourni par l'application elle-m阭e.\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "Param鑤res par d閒aut de l'imprimante"
+msgid "Resolution"
+msgstr "R閟olution"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Printer default settings\n"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Afin de pouvoir acc閐er une imprimante connect閑 un serveur SMB, vous "
+"devez indiquer le nom SMB du serveur (attention, ce dernier peut 阾re "
+"diff閞ent de son nom TCP/IP) et, 関entuellement, son adresse IP ainsi que le "
+"nom de l'imprimante et toute information applicable quant au nom "
+"d'utilisateur, mot de passe et groupe de travail n閏essaires pour acc閐er "
+"l'imprimante."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+" Accept/Refuse icmp echo."
msgstr ""
-"Param閠rage de l'imprimante par d閒aut.\n"
+"Arguments: (arg)\n"
"\n"
-"Assurez-vous que la taille de la page et le type d'encre (si disponible) "
-"sont correctement indiqu閟. Notez que la vitesse d'impression peut diminuer "
-"si vous augmentez la qualit d'impression."
+" Accepte/refuse l'閏ho icmp."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "reconfigure"
+msgstr "reconfigurer"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"Afin de pouvoir imprimer avec votre imprimante Lexmark inkjet et la "
-"configuration actuelle, vous avez besoin des pilotes d'impression inkjet "
-"fournis par Lexmark (http://www.lexmark.com/). Allez sur la section "
-"珷Drivers牷 du site am閞icain de Lexmark, puis choisissez votre mod鑜e et "
-"enfin 珷Linux牷 comme syst鑝e d'exploitation. Les pilotes sont des "
-"paquetages RPM ou des scripts shell avec une installation graphique "
-"interactive. Vous n'avez pas besoin de faire cette configuration avec "
-"l'interface graphique. Annulez directement apr鑣 l'acceptation de la "
-"licence. Ensuite, imprimez les pages pour l'alignement des t阾es "
-"d'impression avec 珷lexmarkmaintain牷 et ajustez les param鑤res de ces t阾es "
-"avec ce programme."
+"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle en utilisant\n"
+"XFree %s.\n"
+"Veuillez noter que ce support est EXP蒖IMENTAL et qu'il peut BLOQUER VOTRE\n"
+"ORDINATEUR."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Configuration de l'imprimante Lexmark inkjet"
+msgid "Xinetd Service"
+msgstr "Service Xinetd"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "acc鑣 aux outils r閟eaux"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-"Les pilotes d'impression inkjet fournis par Lexmark ne permettent que "
-"l'utilisation des imprimantes locales, et pas des imprimantes distantes ou "
-"des serveurs d'impression. Veuillez connecter votre imprimante sur un port "
-"local ou configurez-la sur la machine laquelle elle est connect閑."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
-"Vous 阾es en train de configurer une imprimante laser OKI winprinter.\n"
-"Ces imprimantes utilisent un protocole de communication tr鑣 sp閏ial, et "
-"elles ne fonctionnent que si elles sont connect閑s au premier port "
-"parall鑜e. Si votre imprimante est connect閑 un autre port ou un serveur "
-"d'impression, veuillez la connecter au premier port parall鑜e avant "
-"l'impression de la page de test. Sans cela, l'imprimante ne fonctionnera pas "
-"Vos param鑤res de type de connexion seront ignor閟 par le pilote."
+"Et bien s鹯, poussez le multim閐ia ses limites. Utilisez les tous derniers "
+"lecteurs audio et video. Manipulez vos images et photos."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Configuration de l'imprimante OKI winprinter"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Voici la liste de toutes les imprimantes auto-d閠ect閑s. "
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"Si votre imprimante n'est pas list閑, choisissez-en une compatible (voir le "
-"manuel de l'imprimante) ou similaire."
+"Une erreur est survenue lors de l'installation de 珷aboot牷.\n"
+"D閟irez-vous forcer l'installation au risque de d閠ruire la\n"
+"premi鑢e partition du disque?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
+"Options Description:\n"
"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
msgstr ""
+"description des options:\n"
"\n"
+" cette 閠ape, Drakbackup vous permet de changer:\n"
+"\n"
+" - Le mode de compression:\n"
+" \n"
+" Si vous cochez la compression bzip2, vous compresserez\n"
+" mieux qu'avec gzip (de 2 10 %%).\n"
+" Cette option n'est pas choisie par d閒aut\n"
+" parce qu'elle est beaucoup plus lente (1000%% de plus).\n"
+" \n"
+" - Le mode de mise jour:\n"
+"\n"
+" Cette option met jour votre sauvegarde, mais\n"
+" n'est pas vraiment utile car vous devez la\n"
+" d閏ompresser avant de la mettre jour.\n"
+" \n"
+" - le mode .backupignore:\n"
+"\n"
+" Comme avec CVS, Drakbackup va ignorer les r閒閞ences\n"
+" incluses dans les fichiers .backupignore de chaque dossier.\n"
+" ex: \n"
+" #> cat .backupignore*/\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
-"Veuillez v閞ifier si l'imprimante a 閠 correctement d閠ect閑. Cherchez le "
-"mod鑜e correct dans la liste si le curseur se situe sur un mod鑜e erron ou "
-"sur 珷Imprimante acc鑣 direct牷."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "Quel mod鑜e d'imprimante poss閐ez-vous?"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Restaurer les\n"
+"fichiers choisis"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printer model selection"
-msgstr "S閘ection du mod鑜e de l'imprimante"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s existe, l'effacer? \n"
+"\n"
+"Attention: si vous avez d閖 fait ce processus, vous devrez\n"
+"probablement purger l'entr閑 des cl閟 autoris閑s sur le serveur."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "Lecture de la base de donn閑s des imprimantes..."
+msgid "Please fill or check the field below"
+msgstr "Veuillez compl閠er ou v閞ifier les champs ci-dessous"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Select model manually"
-msgstr "S閘ectionner manuellement le mod鑜e"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "D閟irez-vous sauvegarder les modifications de /etc/fstab"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The model is correct"
-msgstr "Le mod鑜e est correct"
+msgid "Boot Protocol"
+msgstr "Protocole d'amor鏰ge"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Le nom de mod鑜e r閟ultant de l'autod閠ection a 閠 compar閑 la base de "
-"donn閑s d'imprimantes pour trouver la meilleure correspondance. Ce choix "
-"peut 阾re mauvais, particuli鑢ement si votre mod鑜e d'imprimanten'appara顃 "
-"pas dans la base de donn閑s. V閞ifiez ce choix, puis cliquez sur珷Le mod鑜e "
-"est correct牷, ou le cas 閏h閍nt sur 珷S閘ectionner manuellement le "
-"mod鑜e牷.\n"
-"\n"
-"Votre imprimante a 閠 d閠ect閑 comme 閠ant:\n"
-"\n"
-"%s"
+msgid "LVM-disks %s\n"
+msgstr "disques LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Your printer model"
-msgstr "Le mod鑜e de votre imprimante"
+msgid "The package %s is needed. Install it?"
+msgstr "Le paquetage %s est requis. Souhaitez-vous l'installer?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Preparing printer database..."
-msgstr "Pr閜aration de la base de donn閑s des imprimantes..."
+msgid "On boot"
+msgstr "Au d閙arrage"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Location"
-msgstr "Emplacement"
+msgid "Bus identification"
+msgstr "Identification de Bus"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Description"
-msgstr "Description"
+msgid "Please make a backup of your data first"
+msgstr ""
+"Avant d'utiliser un logiciel de partitionnement de disques,\n"
+"il est prudent de faire une copie de sauvegarde de vos donn閑s!!"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Name of printer"
-msgstr "Nom de l'imprimante"
+msgid "Vatican"
+msgstr "Vatican"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
-"Toute imprimante a besoin d'un nom (par exemple 珷lpr牷) auquel on se r閒鑢e "
-"pour pouvoir imprimer.\n"
-"Les champs 珷Description牷 et 珷Emplacement牷 n'ont pas besoin d'阾re "
-"remplis. Ce sont de simples commentaires pour les utilisateurs."
+"Vous poss閐ez plus d'un disque dur.\n"
+"Sur lequel d閟irez vous installer Linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Entrez un nom d'imprimante et un commentaire."
+msgid "Boot ISO"
+msgstr "Image ISO de d閙arrage"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Mise disposition du port d'imprimante CUPS..."
+msgid "Eritrea"
+msgstr "蓃ythr閑"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "V閞ification du p閞iph閞ique et configuration de HPOJ..."
+msgid "Remove List"
+msgstr "D閟installe la liste"
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Acc鑣 la carte m閙oire photo de votre p閞iph閞ique multifonction"
+msgid "A customizable environment"
+msgstr "Un environnement adapt vos besoins"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Num閞isation avec votre p閞iph閞ique multifonction HP"
+msgid "Inuktitut"
+msgstr "Inuktitut"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installation des paquetages mtools..."
+msgid "Morocco"
+msgstr "Maroc"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installation des paquetages SANE..."
+msgid "Which printer model do you have?"
+msgstr "Quel mod鑜e d'imprimante poss閐ez-vous?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installation du paquetage HPOJ..."
+msgid "Add a new printer"
+msgstr "Ajouter une nouvelle imprimante"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Votre imprimante est-elle un p閞iph閞ique multifonction de HP ou Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 avec scanner, Sony IJP-"
-"V100), un HP PhotoSmart ou un HP LaserJet 2200?"
+msgid " All of your selected data have been "
+msgstr " Toutes vos donn閑s s閘ectionn閑s ont 閠 "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "A command line must be entered!"
-msgstr "Une ligne de commande doit 阾re tap閑!"
+msgid "<-- Delete"
+msgstr "<-- Effacer"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Command line"
-msgstr "Ligne de commande"
+msgid "Nepal"
+msgstr "N閜al"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Vous pouvez sp閏ifier ici une ligne de commande dans laquelle sera "
-"redirig閑 l'impression, au lieu d'阾re envoy閑 l'imprimante."
+msgid "cpu # "
+msgstr "processeur n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Pipe into command"
-msgstr "Impression vers une commande shell"
+msgid "chunk size"
+msgstr "Taille de bloc"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "Mod鑜e d閠ect闋: %s %s"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commande de demarrage ou sur <c> pour utiliser la ligne de commande."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Une adresse valide doit 阾re entr閑!"
+msgid "Problems installing package %s"
+msgstr "Des probl鑝es sont apparus en installant le paquetage %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printer Device URI"
-msgstr "Adresse r閟eau du p閞iph閞ique d'impression"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Vous recevrez une alerte si la charge machine d閜asse cette valeur"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Si vous la connaissez, vous pouvez sp閏ifier directement l'adresse r閟eau "
-"(URL) qui permet d'acc閐er l'imprimante. Choisissez un en-t阾e puis "
-"compl閠ez l'adresse en respectant les sp閏ifications CUPS ou Foomatic. Notez "
-"que tous les types d'URL ne sont pas support閟 par tous les gestionnaires "
-"d'impression."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Nom d'h魌e ou adresse IP de l'imprimante "
+"\n"
+"\n"
+"Pour soumettre un rapport de bogue, cliquez sur le bouton Signaler.\n"
+"Cela ouvrira une fen阾re de navigateur sur https://drakbug.mandrakesoft.com\n"
+"o vous trouverez un formulaire remplir.\n"
+" L'information affich閑 ci-dessus sera transf閞閑 vers ce serveur\n"
+"\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "The port number should be an integer!"
-msgstr "Le num閞o de port doit 阾re un nombre entier!"
+msgid "Add a scanner manually"
+msgstr "Ajouter manuellement un scanner"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Nom d'h魌e de l'imprimante ou adresse IP manquant(e)!"
+msgid "Reload partition table"
+msgstr "Relire la table des partitions"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Pour imprimer sur une imprimante TCP ou socket, vous devez indiquer le nom "
-"d'h魌e de l'imprimante et, optionellement, le num閞o du port. Pour les "
-"serveurs d'impression 珷HP JetDirect牷, le num閞o du port est habituellement "
-"9100, mais cela peut 阾re diff閞ent pour d'autres serveurs. Veuillez "
-"consulter le manuel de votre imprimante."
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Connexion automatique (choisir utilisateur et environnement)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Choisissez une imprimante parmi celles qui ont 閠 d閠ect閑s, ou entrez un "
-"nom de machine ou une adresse IP et le num閞o port optionnel (9100 par "
-"d閒aut)."
+msgid "Search for fonts in installed list"
+msgstr "Chercher des polices dans la liste des install閑s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Options de l'imprimante r閟eau (TCP/socket)"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Le r閟eau local ne finissait pas par `.0', j'abandonne."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "H魌e 珷%s牷, port 珷%s牷"
+msgid "Boot"
+msgstr "Partition de d閙arrage"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", h魌e 珷%s牷, port 珷%s牷"
+msgid "Tuner type:"
+msgstr "Type de tuner:"
-#: ../../printer/printerdrake.pm:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Scanning network..."
-msgstr "Parcours du r閟eau..."
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Il faut choisir ici un syst鑝e d'impression pour votre ordinateur. D'autres\n"
+"OSs offrent un, Mandrake Linux en propose deux.\n"
+"\n"
+" * 珷%s牷 - qui veut dire 珷print, don't queue牷, (ou, impression sans\n"
+"passer par la file d'attente) est un bon choix si votre imprimante est\n"
+"branch閑 directement sur votre poste et que vous voulez pouvoir arr阾er\n"
+"l'impression directement en cas de probl鑝e et que vous n'avez pas\n"
+"d'imprimantes r閟eau. Il prendra en charge de simples cas en r閟eau, mais\n"
+"les performances sont plut魌 mauvaises dans ces cas. Choisissez pdq si vous\n"
+"阾es une premi鑢e exp閞ience avec Linux. Vous pourrez toujours changer de\n"
+"syst鑝e plus tard avec PrinterDrake partir du Centre de contr鬺e Mandrake\n"
+"en cliquant sur 珷%s牷.\n"
+"\n"
+" * 珷%s牷 - 珷Common Unix Printing System牷, est fabuleux tant pour\n"
+"imprimante local que pour imprimer l'autre bout du monde. C'est simple et\n"
+"il peu agir comme serveur ou un client avec l'ancien syst鑝e d'impression\n"
+"珷lpd牷. Il s'agit d'un outil tr鑣 puissant, mais les configurations de\n"
+"bases sont aussi simple que pdq. Pour 閙uler un serveur lpq, partez le\n"
+"d閙on (珷daemon牷) cups-lpq. Finalement, %s offre une interface simple\n"
+"pour imprimer et choisir les imprimantes.\n"
+"\n"
+"Vous pourrez changer ult閞ieurement de syst鑝e d'impression en lan鏰nt\n"
+"PrinterDrake depuis le Centre de contr鬺e Mandrake."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Printer auto-detection"
-msgstr "d閠ection automatique d'imprimantes"
+msgid "\"Menu\" key"
+msgstr "Touche 珷Menu牷"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr "Nom de la file d'attente NCP manquant!"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
+"\n"
+"\n"
+"Veuillez v閞ifier si l'imprimante a 閠 correctement d閠ect閑. Cherchez le "
+"mod鑜e correct dans la liste si le curseur se situe sur un mod鑜e erron ou "
+"sur 珷Imprimante acc鑣 direct牷."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "NCP server name missing!"
-msgstr "Nom du serveur NCP manquant!"
+msgid "Security Administrator:"
+msgstr "Administrateur s閏urit闋:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Nom de la file d'impression"
+msgid "Please enter your login"
+msgstr "Nom de connexion sur cette machine"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Printer Server"
-msgstr "Nom du serveur d'impression"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
+"Si oui, v閞ifie les droits des fichiers dans les dossiers personnels des "
+"utilisateurs."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-"Pour pouvoir utiliser une imprimante connect閑 un serveur Netware, vous "
-"devez au moins indiquer le nom Netware du serveur (qui peut 阾re diff閞ent "
-"du nom d'h魌e TCP/IP) et le nom de la file d'impression laquelle vous "
-"voulez acc閐er ainsi qu'un nom d'utilisateur et un mot de passe si "
-"n閏essaire."
+"Vous n'avez aucune connexion internet.\n"
+"Vous pouvez en cr閑r une en cliquant sur 珷Configurer牷"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Options de l'imprimante NetWare"
+msgid "Fonts copy"
+msgstr "Copie des fontes"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Branchez votre imprimante sur un serveur Linux et laissez votre(vos) machine"
-"(s) Windows se connecter en tant que client.\n"
-"\n"
-"Souhaitez-vous vraiment poursuivre le parm閠rage de cette imprimante de "
-"cette fa鏾n?"
+msgid "Automated"
+msgstr "Automatis閑"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "D閟irez-vous tester la configuration?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Param閠rez votre serveur Windows afin que l'imprimante soit disponible sous "
-"le protocole IPP et r間lez l'impression partir de cette machine-ci avec le "
-"type de connexion 珷%s牷 dans Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "L'imprimante 珷%s牷 a 閠 retir閑 avec succ鑣 de StarOffice/OpenOffice"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-"Vous 阾es sur le point de param閠rer l'impression vers un compte Windows "
-"avec mot de passe. A cause d'une erreur dans la conception du logiciel "
-"client Samba, le mot de passe est inscrit en clair dans la ligne de commande "
-"qu'il envoie pour transmettre le travail d'impression au serveur Windows. Il "
-"est donc possible pour n'importe quel utilisateur de cette machine "
-"d'afficher l'閏ran ce mot de passe, simplement en tapant une commande "
-"comme 珷ps auxwww牷.\n"
+"Standard: Ceci est le niveau standard de s閏urit recommand pour un "
+"ordinateur devant se connecter Internet en tant que client.\n"
"\n"
-"Nous vous conseillons d'utiliser les solutions alternatives suivantes (dans "
-"tous les cas, vous devez vous assurer que seules les machines de votre "
-"r閟eau local peuvent acc閐er votre serveur Windows, l'aide d'un pare-feu "
-"logiciel (firewall) par exemple):\n"
+"蒷ev閑: il y a d閖 quelques restrictions, et un peu plus de v閞ifications "
+"de s閏urit sont effectu閑s chaque nuit.\n"
"\n"
-"Utilisez un compte sans mot de passe sur votre serveur Windows, tel que le "
-"compte 珷Invit闋 ou alors un compte d閐i sp閏ialement l'impression. "
-"N'enlevez pas la protection d'un compte Utilisateur ou Administrateur.\n"
+"Plus 閘ev閑: La s閏urit est ici suffisante pour utiliser la machine comme "
+"serveur acceptant de multiples connexions. Si votre machine est simplement "
+"une machine cliente pour Internet, un niveau inf閞ieur est pr閒閞able.\n"
"\n"
-"Param閠rez votre serveur Windows afin que les imprimantes soient disponibles "
-"sous le protocole LPD. R間lez ensuite l'impression de cette machine-ci avec "
-"le type de connexion 珷%s牷 dans Printerdrake.\n"
+"Panao颽que: Similaire au pr閏閐ent, mais le syst鑝e sera totalement clos et "
+"la s閏urit au maximum.\n"
"\n"
+"Administrateur de S閏urit闋: Si l'option 珷Alertes de s閏urit闋 est "
+"choisie, celles-ci seront envoy閑s l'utilisateur indiqu (nom ou\n"
+"courriel)."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ALERTE DE S蒀URIT蔂!"
+msgid "Save packages selection"
+msgstr "Sauvegarder la s閘ection des paquetages"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "Il faut pr閏iser le nom de partage de l'imprimante."
+msgid "Remove the last item"
+msgstr "Supprimer le dernier 閘閙ent"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Il faut au moins pr閏iser le nom du serveur ou son adresse IP."
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Fichiers de sauvegarde restaurer (seul le plus r閏ent compte)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detected"
-msgstr "Auto-d閠ect"
+msgid "No net boot images created!"
+msgstr "Aucune image d'amor鏰ge r閟eau cr殚e"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Groupe de travail"
+msgid "use pptp"
+msgstr "utiliser 珷pptp牷"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Nom de partage de l'imprimante"
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
+"Choisissez les services d閙arrer automatiquement lors du d閙arrage du "
+"syst鑝e"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server IP"
-msgstr "Adresse IP du serveur"
+msgid "Learn how to use this printer"
+msgstr "Savoir comment utiliser cette imprimante"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SMB server host"
-msgstr "Nom du serveur"
+msgid "Configure the network now"
+msgstr "Configurez le r閟eau maintenant"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Si l'imprimante voulue a 閠 autod閠ect閑, choisissez la dans la liste et "
-"ajoutez un nom d'utilisateur, un mot de passe et un groupe de travail si "
-"n閏essaire."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Choisissez un serveur miroir d'o t閘閏harger les paquetages"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Afin de pouvoir acc閐er une imprimante connect閑 un serveur SMB, vous "
-"devez indiquer le nom SMB du serveur (attention, ce dernier peut 阾re "
-"diff閞ent de son nom TCP/IP) et, 関entuellement, son adresse IP ainsi que le "
-"nom de l'imprimante et toute information applicable quant au nom "
-"d'utilisateur, mot de passe et groupe de travail n閏essaires pour acc閐er "
-"l'imprimante."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Configuration d'une imprimante SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Imprimante 珷%s牷 sur serveur 珷%s牷"
+"Le programme de redimensionnement des partitions FAT ne peut g閞er votre\n"
+"partition. L'erreur suivante est survenue: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", imprimante 珷%s牷 sur serveur 珷%s牷"
+msgid "Which sector do you want to move it to?"
+msgstr "Sur quel secteur souhaitez-vous la d閜lacer?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "Le nom de l'imprimante est manquant!"
+msgid "Do you want to click on this button?"
+msgstr "D閟irez-vous cliquer sur ce bouton?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "Nom du serveur distant manquant!"
+msgid "Bahamas"
+msgstr "Bahamas"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "Nom de l'imprimante"
+msgid "Manual configuration"
+msgstr "Configuration manuelle"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name"
-msgstr "Nom d'h魌e du serveur"
+msgid "search"
+msgstr "chercher"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Pour utiliser une imprimante Unix distante, vous devez indiquer le nom "
-"d'h魌e du serveur LPD et le nom attribu l'imprimante par ce serveur."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Configuration d'une imprimante Unix (lpd) distante"
+"Ce paquetage active la disposition de clavier d閒ini dans le fichier /etc/"
+"sysconfig/keyboard. Cette disposition peut 阾re modifi閑 en utilisant "
+"l'outil kbdconfig. Ce service devrait 阾re activ sur la plupart des "
+"machines."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Manual configuration"
-msgstr "Configuration manuelle"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (pilote d'affichage pour l'installation)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Vous devez choisir ou entrer une imprimante ou un p閞iph閞ique!"
+msgid "Zeroconf host name must not contain a ."
+msgstr "Le nom d'h魌e zeroconf ne doit pas contenir de point"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-"(Ports parall鑜es: /dev/lp0, /dev/lp1, ..., 閝uivalents LPT1:, "
-"LPT2:, ..., premi鑢e imprimante USB: /dev/usb/lp0, deuxi鑝e imprimante "
-"USB: /dev/usb/lp1, ...)."
+"Syslog est un service utilis par beaucoup d'autres services pour "
+"enregistrer des rapports d'activit. C'est une tr鑣 bonne id閑 de toujours "
+"l'activer."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Veuillez choisir le port sur lequel votre imprimante est connect閑."
+msgid "Unknown/Others"
+msgstr "Inconnus/Autres"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Veuillez choisir le port sur laquelle votre imprimante est connect閑 ou "
-"tapez le nom du p閞iph閞ique ou de fichier dans le champs d'entr閑"
+msgid "No TV Card detected!"
+msgstr "Aucune carte TV d閠ect閑!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Options"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Veuillez choisir l'imprimante sur laquelle seront envoy les travaux "
-"d'impression."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "L'imprimante 珷%s牷 est maintenant celle par d閒aut."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"Veuillez choisir l'imprimante que vous voulez configurer. La configuration "
-"de cette imprimante sera effectu閑 automatiquement. Si votre imprimante n'a "
-"pas 閠 correctement d閠ect閑 ou si vous pr閒閞ez effectuer une "
-"configuration personnalis閑, activez 珷Configuration Manuelle 牷."
+"Vous 阾es en train de configurer une imprimante laser OKI winprinter.\n"
+"Ces imprimantes utilisent un protocole de communication tr鑣 sp閏ial, et "
+"elles ne fonctionnent que si elles sont connect閑s au premier port "
+"parall鑜e. Si votre imprimante est connect閑 un autre port ou un serveur "
+"d'impression, veuillez la connecter au premier port parall鑜e avant "
+"l'impression de la page de test. Sans cela, l'imprimante ne fonctionnera pas "
+"Vos param鑤res de type de connexion seront ignor閟 par le pilote."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Voici la liste de toutes les imprimantes auto-d閠ect閑s. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "G閚閞ation du processeur (exemple: 8 pour les Pentium III, ...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Il n'y a pour l'instant pas de solution alternative"
+msgid "Auto-detected"
+msgstr "Auto-d閠ect"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-"La configuration de cette imprimante sera effectu閑 automatiquement. Si "
-"votre imprimante n'a pas 閠 correctement d閠ect閑 ou si vous pr閒閞ez "
-"effectuer une configuration personnalis閑, activez 珷Configuration Manuelle "
-"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "L'imprimante suivante a 閠 d閠ect閑."
+"Vous vous appr阾ez installer un serveur PXE agissant comme un serveur "
+"DHCP,\n"
+"et un serveur TFTP comme un serveur d'installation.\n"
+"Avec cette fonction, d'autres ordinateurs sur votre r閟eau local pourront "
+"阾re install閟 partir de cet ordinateur.\n"
+"\n"
+"Assurez-vous d'avoir configur votre acc鑣 R閟eau/Internet avec DrakConnect "
+"avant d'aller plus loin.\n"
+"\n"
+"Veuillez noter que vous avez besoin d'une carte r閟eau d閐i閑 votre r閟eau "
+"local."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"Veuillez choisir l'imprimante sur laquelle les travaux d'impression seront "
-"envoy閟 ou tapez un nom de p閞iph閞ique ou de fichier dans le champ d'entr閑"
+"Pas de place libre pour la partition d'amor鏰ge (bootstrap) de 1燤o."
+"L'installation va\n"
+"continuer, mais pour que votre syst鑝e puisse d閙arrer, vous aurez besoin "
+"de\n"
+"cr閑r la partition d'amor鏰ge avec DiskDrake."
#: ../../printer/printerdrake.pm:1
#, c-format
@@ -12537,1104 +12393,789 @@ msgstr ""
"Veuillez choisir l'imprimante que vous voulez configurer ou tapez un nom de "
"p閞iph閞ique ou de fichier dans le champ d'entr閑"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Refuse"
+msgstr "Refuser"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-"Sinon vous pouvez sp閏ifier un nom de p閞iph閞ique ou de fichier dans le "
-"champ d'entr閑"
+"HardDrake effectue une d閠ection mat閞ielle, et configure 関entuellement le "
+"nouveau mat閞iel."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+msgid "Remote Printers"
+msgstr "Imprimantes distantes"
+
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "Cr閍tion et formatage du fichier %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
-"si ce n'est pas celle que vous voulez configurer, tapez un nom de fichier ou "
-"de p閞iph閞ique dans le champ d'entr閑"
+"Si oui, v閞ifie les ajouts/retraits des fichiers qui ont la permission \"sgid"
+"\"."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Available printers"
-msgstr "Imprimantes disponibles"
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No printer found!"
-msgstr "Aucune imprimante trouv閑!"
+msgid "Choose an existing LVM to add to"
+msgstr "Choisissez un LVM existant"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Vous devez enter un nom de fichier ou de p閞iph閞ique!"
+msgid "xfs restart"
+msgstr "red閙arrage du serveur de fonte"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
-"Aucune imprimante locale n'a pu 阾re trouv閑!\n"
-"Pour en installer une manuellement entrez un nom de p閞iph閞ique ou de "
-"fichier sur la ligne d'entr閑 (Ports parall鑜es: /dev/lp0, /dev/lp1, ..., "
-"閝uivalents LPT1:, LPT2:, ..., premi鑢e imprimante USB: /dev/usb/lp0, "
-"deuxi鑝e imprimante USB: /dev/usb/lp1, ...) "
+"L'imprimante 珷%s牷 existe d閖,\n"
+"souhaitez-vous vraiment 閏raser sa configuration?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Local Printer"
-msgstr "Imprimante locale"
+msgid "No partition available"
+msgstr "Aucune partition disponible"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "USB printer \\#%s"
-msgstr "Imprimante USB %s"
+msgid "Use the scanners on hosts: "
+msgstr "Utiliser les scanners sur les h魌es: "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Imprimante sur le port parall鑜e %s"
+msgid "Unselected All"
+msgstr "D閟閘ectionne tout"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Imprimante 珷%s牷 sur serveur Windows/SMB 珷%s牷"
+msgid "Domain Name Resolver"
+msgstr "Solveur de Nom de domaine"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Imprimante r閟eau autonome 珷%s牷, port %s"
+msgid "Encryption key (again)"
+msgstr "Clef de chiffrement (confirmation)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detected %s"
-msgstr "D閠ect %s"
+msgid "Samba share name missing!"
+msgstr "Il faut pr閏iser le nom de partage de l'imprimante."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", imprimante 珷%s牷 sur serveur SMB/Windows 珷%s牷"
+msgid "True Type install done"
+msgstr "Installation 珷True Type牷 termin閑"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", imprimante r閟eau 珷%s牷, port 珷%s牷"
+msgid "Detection in progress"
+msgstr "D閠ection en cours"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"F閘icitation, votre imprimante est maintenant install閑 et configur閑.\n"
-"\n"
-"Vous pouvez imprimer en utilisant la commande 珷imprimer牷 de vos\n"
-"applications (souvent dans le menu 珷fichier牷).\n"
-"\n"
-"Si vous voulez ajouter, enlever ou renommer une imprimante, ou si vous "
-"voulez changer les options par d閒aut (alimentation papier,qualit "
-"d'impression, etc.), rendez-vous dans la partie 珷imprimante牷de la section "
-"珷mat閞iel牷 du Centre de Contr鬺e Mandrake."
+msgid "Build Whole Kernel -->"
+msgstr "Construire le noyau entier -->"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"D閠ecter automatiquement les imprimantes reli閑s des machines sous windows"
+msgid "Welcome to %s"
+msgstr "Bienvenue sur %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "D閠ecter automatiquement les imprimantes reli閑s directement au r閟eau"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Ins閞ez la disquette de mise jour de modules dans le lecteur %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "D閠ecter automatiquement les imprimantes connect閑s sur cette machine"
+msgid "Bootsplash"
+msgstr "Image pendant l'amor鏰ge"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"L'imprimante suivante:\n"
"\n"
-"Bienvenue dans l'assistant de configuration d'imprimante\n"
-"\n"
-"Cet assistant vous aidera installer les imprimantes connect閑s cet "
-"ordinateur.\n"
-"\n"
-"Si vous avez des imprimantes branch閑s sur cet ordinateur, veuillez les "
-"allumer afin qu'elles soient d閠ect閑s automatiquement.\n"
-"\n"
-"Cliquez sur 珷suivant牷 quand vous 阾es pr阾, ou sur 珷annuler牷 si vous ne "
-"voulez pas configurer d'imprimante maintenant."
+"%s%s\n"
+"est connect閑 directement votre syst鑝e."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Bienvenue dans l'assistant de configuration d'imprimante\n"
-"\n"
-"Cet assistant vous aidera installer les imprimantes connect閑s soit cet "
-"ordinateur, soit directement au r閟eau.\n"
-"\n"
-"Si vous avez des imprimantes branch閑s sur cet ordinateur, veuillez les "
-"allumer afin qu'elles soient d閠ect閑s automatiquement. Les imprimantes "
-"r閟eau doivent aussi 阾re allum閑s.\n"
-"\n"
-"Notez que l'autod閠ection des imprimantes r閟eau est plus longue que celle "
-"des imprimantes locales, donc vous pouvez la d閟activer si vous n'en avez "
-"pas besoin.\n"
-"\n"
-"Cliquez sur 珷suivant牷 quand vous 阾es pr阾, ou sur 珷annuler牷 si vous ne "
-"voulez pas configurer d'imprimante maintenant."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Partage d'imprimante sur les h魌es/r閟eaux:"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
-"Bienvenue dans l'assistant de configuration d'imprimante\n"
-"\n"
-"Cet assistant vous aidera installer les imprimantes connect閑s soit cet "
-"ordinateur, soit directement au r閟eau, soit sur un ordinateur distant sous "
-"Windows.\n"
-"\n"
-"Si vous avez des imprimantes branch閑s sur cet ordinateur, veuillez les "
-"allumer afin qu'elles soient d閠ect閑s automatiquement. Les imprimantes "
-"r閟eau et les imprimantes sous Windows doivent aussi 阾re allum閑s et "
-"reli閑s.\n"
-"\n"
-"Notez que les autod閠ections des imprimantes r閟eau ou Windows sont plus "
-"longues que celle des imprimantes locales, donc vous pouvez les d閟activer "
-"si vous n'en avez pas besoin.\n"
-"\n"
-"Cliquez sur 珷suivant牷 quand vous 阾es pr阾, ou sur 珷annuler牷 si vous ne "
-"voulez pas configurer d'imprimante maintenant."
+"La commande 珷%s牷 permet 間alement de modifier les param鑤res d'impression "
+"pour une impression particuli鑢e. Il suffit pour cela d'ajouter les "
+"param鑤res voulus sur la ligne de commande. Par exemple, 珷%s <fichier>牷. "
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de Configuration d'Imprimante\n"
-"\n"
-"Cet assistant permet de configurer des imprimantes locales ou r閟eau afin "
-"d'阾re utilis閑s partir de cette machine ainsi que des autres machines du "
-"r閟eau.\n"
-"\n"
-"Toutes les informations n閏essaires pour configurer l'imprimante vous seront "
-"demand閑s; vous aurez 間alement acc鑣 tous les pilotes d'imprimantes "
-"disponibles ainsi qu' toutes leurs options et tous les types de connexion."
+"Le pilote de mat閞iel 珷%s牷 a parfois besoin d'options suppl閙entaires\n"
+"pour fonctionner de mani鑢e optimale.\n"
+"Vous pouvez lui fournir manuellement ces options,\n"
+"ou bien lui laisser les d閠ecter automatiquement.\n"
+"(La d閠ection peut dans certains cas bloquer l'ordinateur,\n"
+"mais sans lui causer de dommage.)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Ce n'est pas le bon CD. Celui-ci est intitul %s."
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
"\n"
+"%s\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
msgstr ""
+"Bienvenue dans l'utilitaire de partage de connexion internet!\n"
"\n"
+"%s\n"
"\n"
-"Le mod鑜e de votre imprimante %s n'a pas pu 阾re d閠ermin. Veuillez choisir "
-"le mod鑜e correct dans la liste."
+"Cliquez sur Configurer pour lancer l'assistant de configuration."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "Cuba"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on "
-msgstr " sur"
+msgid "Searching for new printers..."
+msgstr "Recherche de nouvelles imprimantes..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "Belize"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring printer ..."
-msgstr "Configuration de l'imprimante en cours..."
+msgid " (multi-session)"
+msgstr " (multisession)"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "Recherche de nouvelles imprimantes..."
+msgid "Kernel Boot Timeout"
+msgstr "D閘ai d'amor鏰ge du noyau"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"NOTE: En fonction du mod鑜e et du syst鑝e d'impression, jusqu' %d Mo de "
-"logiciels additionnels seront install閟."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "蕋es-vous s鹯 de vouloir d閒inir l'impression sur cette machine?\n"
+"Votre carte vid閛 peut utiliser l'acc閘閞ation 3D mat閞ielle mais\n"
+"uniquement en utilisant XFree %s.\n"
+"Votre carte vid閛 est support閑 par XFree %s. Ce dernier peut 阾re plus\n"
+"performant en 2D."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Souhaitez-vous activer l'impression sur les imprimantes ci-dessus?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "L'assistant de partitionnement a trouv les solutions suivantes:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"Souhaitez-vous activer l'impression sur les imprimantes de votre r閟eau?\n"
+msgid "Hungarian"
+msgstr "Hongrois"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-"Souhaitez-vous permettre l'impression sur les imprimantes ci-dessus ou sur "
-"celles du r閟eau local?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "(V閞ifiez que toutes les imprimantes sont connect閑s et allum閑s).\n"
+"Veuillez choisir votre fournisseur d'acc鑣.\n"
+"S'il ne figure pas dans la liste, choisissez 珷Non list闋."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Aucune des imprimantes trouv閑s n'est directement reli閑 votre machine"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Synchronisation automatique de l'horloge (via NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Il y a %d imprimantes inconnues reli閑s votre machine"
+msgid "8 MB"
+msgstr "8 Mo"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Il y a une imprimante inconnue connect閑 votre machine"
+msgid "LDAP Server"
+msgstr "Serveur LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-"L'imprimante suivante:\n"
-"\n"
-"%s%s\n"
-"est connect閑 directement votre syst鑝e."
+"PCMCIA permet d'utiliser des p閞iph閞iques PCCARD comme des cartes Ethernet "
+"ou des modems avec des ordinateurs portables. Ce service ne sera pas d閙arr "
+" moins qu'il soit correctement configur. Il peut donc 阾re activ sans "
+"danger sur des machines ne poss閐ant pas ce type de p閞iph閞iques."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Les imprimantes suivantes:\n"
-"\n"
-"%s%s\n"
-"sont connect閑s directement votre syst鑝e."
+msgid "Choose your country"
+msgstr "Choisissez votre pays"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
msgstr ""
-"Les imprimantes suivantes:\n"
"\n"
-"%s%s\n"
-"sont connect閑s directement votre syst鑝e."
+"- Fichiers syst鑝e:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "and %d unknown printers"
-msgstr "et %d imprimantes inconnues"
+msgid "Standalone Tools"
+msgstr "Outils autonomes"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "and one unknown printer"
-msgstr "et une imprimante inconnue"
+msgid "Where"
+msgstr "O..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Checking your system..."
-msgstr "V閞ification de votre syst鑝e..."
+msgid "but not matching"
+msgstr "mais ne contenant pas"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr "Red閙arrage de CUPS..."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr ""
+"Vous pouvez s閘ectionner ici un pilote alternatif (OSS ou ALSA) pour votre "
+"carte son (%s)"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Ce serveur est d閖 dans la liste, il ne peut pas 阾re rajout.\n"
+msgid "Configuring PCMCIA cards..."
+msgstr "Configuration des cartes PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Exemples d'adresses IP correctes:\n"
+msgid "kdesu missing"
+msgstr "le programme 珷kdesu牷 est introuvable"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "L'adresse IP n'est pas correcte.\n"
+msgid "Encryption key"
+msgstr "Clef de chiffrement"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "Adresse IP du serveur manquante!"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Christmas Island"
+msgstr "蝜e Christmas"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
-"Entrez l'adresse IP et le num閞o de port de la machine dont vous voulez "
-"utiliser les imprimantes."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Acc鑣 aux imprimantes sur serveurs CUPS distant..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove selected server"
-msgstr "Supprimer le serveur s閘ectionn"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Edit selected server"
-msgstr "Modifier le serveur s閘ectionn"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add server"
-msgstr "Ajouter un serveur"
+"L'installation du programme d'amor鏰ge a 閏hou pour la raison suivante:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ajoutez ici les serveurs CUPS dont vous voulez utiliser les imprimantes. "
-"Vous n'avez besoin de faire cela que si les serveurs ne diffusent pas les "
-"informations de leurs imprimantes sur le r閟eau local."
+msgid "EIDE/SCSI channel"
+msgstr "Nappe EIDE/Canal SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
-msgstr "Adresse IP de l'h魌e/r閟eau:"
+msgid "Set this printer as the default"
+msgstr "Choisir comme imprimante par d閒aut"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Cet h魌e/r閟eau est d閖 dans la liste, il ne peut pas 阾re rajout.\n"
+msgid "partition %s"
+msgstr "partition %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "L'adresse IP de l'h魌e/r閟eau n'est pas correcte.\n"
+msgid "Paranoid"
+msgstr "Parano颽que"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
-msgstr "Adresse IP de l'h魌e/r閟eau manquante."
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Choisissez l'h魌e ou le r閟eau partir duquel les imprimantes locales "
-"seront disponibles:"
+msgid "<-- Del User"
+msgstr "<-- Effacer un utilisateur"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Sharing of local printers"
-msgstr "Partage d'imprimantes locales"
+msgid "Location on the bus"
+msgstr "Position sur le bus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr "Supprimer l'h魌e/r閟eau s閘ectionn"
+msgid "No printer found!"
+msgstr "Aucune imprimante trouv閑!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
-msgstr "Modifier l'h魌e/r閟eau s閘ectionn"
+msgid "the vendor name of the device"
+msgstr "le nom du vendeur de ce p閞iph閞ique"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr "Ajouter un h魌e/r閟eau"
+msgid "Erase entire disk"
+msgstr "Effacer tout le disque"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Voici les machines et les r閟eaux partir desquels les imprimantes locales "
-"seront disponibles:"
+msgid " (Default)"
+msgstr " (D閒aut)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-"Quand cette option est activ閑, chaque d閙arrage de CUPS v閞ifiera que:\n"
-"\n"
-"- si LPD/LPRng est install, /etc/printcap ne sera pas 閏ras par CUPS\n"
-"\n"
-"- si /etc/cups/cupsd.conf est absent, il sera cr殚\n"
-"\n"
-"- quand l'information d'imprimante est diffus閑, elle ne contient past "
-"\"localhost\" comme nom de serveur.\n"
+"Arguments: ()\n"
"\n"
-"Si cette option vous conduit des probl鑝es, d閟activez-la, mais faites "
-"alors attention aux points ci-dessus."
+"Si SERVER_LEVEL (ou SECURE_LEVEL sinon) est sup閞ieur 3\n"
+"dans /etc/security/msec/security.conf, cr閑r le lien symbolique /etc/"
+"security/msec/server\n"
+"pointant vers /etc/security/msec/server.<SERVER_LEVEL>. Le fichier /etc/"
+"security/msec/server\n"
+"est utilis par chkconfig --add pour d閏ider d'ajouter un service s'il est "
+"pr閟ent dans le fichier\n"
+"pendant l'installation des paquetages."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Correction automatique de la configuration du serveur CUPS"
+msgid "Automatic reconfiguration"
+msgstr "Reconfiguration automatique"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Changer le syst鑝e d'impression"
+msgid "Receiving Speed:"
+msgstr "Vitesse de r閏eption:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Pour obtenir l'acc鑣 aux imprimantes situ閑s sur des serveurs CUPS distants "
-"de votre r閟eau local, vous avez seulement besoin d'activer l'option "
-"\"Trouver automatiquement des imprimantes disponibles sur des machines "
-"distantes\". Les serveurs CUPS informent votre machine automatiquement sur "
-"leurs imprimantes. Toutes les imprimantes actuellement connues par votre "
-"machine sont list閑s dans la section \"Imprimantes distantes\" dans la "
-"fen阾re principale de Printerdrake. Si les serveurs CUPS ne sont pas dans "
-"votre r閟eau local, vous devez entrer leur adresse IP et optionnellement "
-"leur num閞o de port, afin d'obtenir des informations sur les imprimantes qui "
-"y sont connect閑s."
+msgid "Turks and Caicos Islands"
+msgstr "蝜es Turks et Ca颿os"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "None"
-msgstr "Aucun"
+msgid "permissions"
+msgstr "permissions"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Serveurs CUPS additionnels:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Pas de machine distante"
+msgid "<- Previous"
+msgstr "<- Pr閏閐ent"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Custom configuration"
-msgstr "configuration personnalis閑"
+msgid "Internet Connection Sharing configuration"
+msgstr "Configuration du partage de la connexion internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Partage d'imprimante sur les h魌es/r閟eaux:"
+msgid "Toggle between flat and group sorted"
+msgstr "Basculer entre tri alphab閠ique et tri par groupes"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
-"Trouver automatiquement des imprimantes disponibles sur des machines "
-"distantes."
+msgid "Themes"
+msgstr "Th鑝es"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-"Les imprimantes de cette machine sont disponibles aux autres ordinateurs"
+msgid "Options: %s"
+msgstr "Options: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-"Vous pouvez aussi d閏ider ici si les imprimantes des machines distantes "
-"seront rendues automatiquement disponibles sur cette machine."
+"Le choix du syst鑝e d'exploitation est actuellement g閞 par %s.\n"
+"Vous pouvez ici modifier la liste du menu d'amor鏰ge."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Vous pouvez ici choisir si les imprimantes connect閑s cette machine "
-"doivent 阾re accessibles depuis des machines distantes, et quelles machines "
-"pourront y acc閐er."
+msgid "OKI winprinter configuration"
+msgstr "Configuration de l'imprimante OKI winprinter"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Configuration de l'imprimante CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "Sainte-H閘鑞e"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Autod閠ection d'imprimante (locale, r閟eau, et SMB)"
+msgid "Security Level"
+msgstr "Niveau de s閏urit"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
+"Certaines 閠apes ne sont pas termin閑s.\n"
"\n"
-"Les imprimantes connect閑s un serveur CUPS distant n'ont pas besoin d'阾re "
-"configur閑s ici; elles seront automatiquement d閠ect閑s."
+"Souhaitez-vous vraiment quitter maintenant?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
-msgstr "Quel est le type de connexion de l'imprimante?"
+msgid "Sudan"
+msgstr "Soudan"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Type de connexion de l'imprimante"
+msgid "Polish (qwertz layout)"
+msgstr "Polonais (QWERTZ)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "Syrie"
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"R間lez le 珷umask牷 utilisateur."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Arguments: (val)\n"
-"\n"
-"R間lez le d閘ai d'expiration du shell. Z閞o signifie pas d'expiration."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Bienvenue dans %s, le chargeur de systemes d'exploitation.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Arguments: (size)\n"
+"Choisissez un systeme d'exploitation dans la liste ci-dessus.\n"
+"-- Demarrage automatique dans %d secondes.\n"
"\n"
-"R間lez la profondeur de l'historique du shell. Une valeur de -1 signifie "
-"historique illimit."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-"Si oui, v閞ifie les ajouts/retraits des fichiers qui ont la permission \"sgid"
-"\"."
+msgid "Portuguese"
+msgstr "Portugais"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr "Si oui, v閞ifie les ports ouverts du r閟eau."
+msgid "Loopback file name: "
+msgstr "Nom du fichier de bouclage:"
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "DNS server address should be in format 1.2.3.4"
msgstr ""
-"Si rempli, envoie le rapport par courriel cette adresse, sinon root."
+"L'adresse du DNS doit ressembler quelque chose comme 珷192.168.1.20牷"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "Si oui, envoie un rapport de v閞ification par courriel"
+msgid "Serbia"
+msgstr "Serbie"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "Si oui, v閞ifie les fichiers/dossiers que tout le monde peut modifier"
+msgid "Newzealand"
+msgstr "Nouvelle Z閘ande"
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "Si oui, envoie le rapport de v閞ification dans le terminal."
+msgid "This directory should remain within the root filesystem"
+msgstr "Ce dossier doit rester dans la partition racine"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-"Si oui, effectue des v閞ifications par rapport la base de donn閑s des "
-"paquetages rpm."
+msgid "CapsLock key"
+msgstr "Touche CapsLock (verrouillage majuscule)"
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "Si oui, v閞ifie si les p閞iph閞iques r閟eaux sont dans un mode espion"
+msgid "Install bootloader"
+msgstr "Programme d'amor鏰ge"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Select the memory size of your graphics card"
msgstr ""
-"Si oui, effectue des v閞ifications par chkrootkit (recherche de rootkits)"
+"Veuillez pr閏iser la quantit de m閙oire vid閛 de votre carte graphique"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-"Si oui, v閞ifie les droits des fichiers dans les dossiers personnels des "
-"utilisateurs."
+"[OPTIONS]\n"
+"Application de surveillance et de connexion r閟eau et internet\n"
+"\n"
+"--defaultintf interface : montre cette interface par d閒aut\n"
+"--connect : se connecte Internet (si non connect)\n"
+"--disconnect : se d閏onnecte d'Internet (si connect)\n"
+"--force : utilis avec l'option (dis)connect : force la (d)connexion.\n"
+"--status : retourne 1 si connect, 0 sinon, puis quitte.\n"
+"--quiet : non interactif. utiliser avec l'option (dis)connect."
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"Si oui, v閞ifie les ajouts/retraits des fichiers qui ont la permission \"suid"
-"\"."
+msgid "Dynamic IP Address Pool:"
+msgstr "Plages d'adresses IP dynamiques"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "Si oui, envoie le rapport de v閞ification vers syslog."
+msgid "LVM name?"
+msgstr "Nom LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"Si oui, v閞ifie les mots de passe vides, les mots de passes absents de /etc/"
-"shadow, et les utilisateurs autres que root ayant le num閞o d'\"id\" 間al "
-"0."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "Certains mat閞iels list閟 dans la classe 珷%s牷 ont 閠 enlev閟:\n"
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "Si oui, effectue les v閞ifications quotidiennes de s閏urit."
+msgid "Found %s %s interfaces"
+msgstr "Interface(s) d閠ect閑(s): %s %s"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-"Si oui, v閞ifie les sommes de contr鬺e des fichiers ayant la permission suid/"
-"sgid."
+msgid "sticky-bit"
+msgstr "sticky-bit"
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "Si oui, v閞ifie les mots de passe vides dans /etc/shadow."
+msgid "Post Install"
+msgstr "Post-installation"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "Si oui, cherche des fichiers sans propri閠aire."
+msgid "The internal domain name"
+msgstr "Le nom de domaine international"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Arguments: (umask)\n"
-"\n"
-"R鑗le le 珷umask牷 de root"
+msgid "Card IRQ"
+msgstr "n IRQ de la carte"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
msgstr ""
-"Arguments: (longueur, nbchiffres=0, nbmajuscules=0)\n"
+"Arguments: (umask)\n"
"\n"
-"R鑗le la longueur minimum, le nombre minimum de chiffres et le nombre "
-"minimum de lettres en majuscule d'un mot de passe."
+"R間lez le 珷umask牷 utilisateur."
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"R鑗le la profondeur de l'historique des mots de passe pour 関iter la "
-"r閡tilisation de mots de passe."
+msgid "logdrake"
+msgstr "logdrake"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"R鑗le la dur閑 de vie des mots de passe 珷max牷 et le d閘ai de changement "
-"de mot de passe 珷inactive牷."
+"Application de gestion et d'importation de polices de "
+"carat鑢es \n"
+"--windows_import : importe partir de toutes les partitions Windows "
+"disponibles.\n"
+"--xls_fonts : montre toutes les polices d閖 existante par xls\n"
+"--strong : v閞ification forte de la fonte.\n"
+"--install : accepte tout fichier et tout dossier pour les polices.\n"
+"--uninstall : d閟installe toute police ou tout dossier pour les "
+"polices.\n"
+"--replace : remplace les polices existantes\n"
+"--application : 0 : aucune application.\n"
+" : 1 : toute application disponible support閑.\n"
+" : nom_application : pour par exemple staroffice, \n"
+" : ou gs pour ghostscript (pour 1 appli)."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Arguments: (nom)\n"
-"\n"
-"Exclue 珷nom牷 de la gestion des mots de passe par msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active la demande de mot de passe en mode mono-utilisateur."
+"Choisissez le lecteur de disquette utiliser pour\n"
+"cr閑r votre disquette d'amor鏰ge."
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Active/D閟active les v閞ifications quotidiennes de s閏urit."
+msgid "LILO with text menu"
+msgstr "LILO en mode texte"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active la v閞ification du mode espion des cartes r閟eau."
+msgid "Everything (no firewall)"
+msgstr "Tout (pas de firewall)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Utilise un mot de passe pour authentifier les utilisateurs."
+msgid "You must specify a kernel image"
+msgstr "Vous devez sp閏ifier l'image noyau d閟ir閑"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Autorise 珷su牷 seulement pour les membres du groupe 珷wheel牷 ou bien pour "
-"tout le monde."
+msgid ", multi-function device on USB"
+msgstr ", p閞iph閞ique USB multifonction"
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active les v閞ifications de msec toutes les heures."
+msgid "Do"
+msgstr "Faire"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active le tra鏰ge de tous les paquets IPv4 閠ranges."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "T閘閏hargement de la liste des paquetages disponibles..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active la biblioth鑡ue libsafe si elle est trouv閑 sur le syst鑝e."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituanien (AZERTY, ancien mod鑜e)"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Arguments: (arg, alerte=1)\n"
-"\n"
-"Active/D閟active la protection contre l'usurpation d'adresse IP (IP "
-"spoofing)."
+msgid "Brazilian (ABNT-2)"
+msgstr "Br閟ilien"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Arguments: (arg, alerte=1)\n"
-"\n"
-"Active/D閟active la protection contre l'usurpation de r閟olution de nom "
-"(name resolution spoofing).\n"
-"Si 珷alert牷 est 1, effectue aussi des rapports syslog."
+msgid "IP address of host/network:"
+msgstr "Adresse IP de l'h魌e/r閟eau:"
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Active/D閟active les rapports syslog vers la console 12. 珷expr牷 est\n"
-"l'expression d閏rivant quoi rapporter (voir syslog.conf(5) pour plus de "
-"d閠ails) et\n"
-"dev le p閞iph閞ique o faire les rapports."
+"coordonn閑s y du coin sup閞ieur gauche\n"
+"de la barre de progression"
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active les travaux planifi閟 (crontab et at) pour les "
-"utilisateurs. Mettre les utilisateurs autoris閟 dans /etc/cron.allow et /etc/"
-"at.allow\n"
-"(voir les pages de manuel at(1) et crontab(1))."
+msgid "System installation"
+msgstr "Installation du syst鑝e"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Arguments: ()\n"
-"\n"
-"Si SERVER_LEVEL (ou SECURE_LEVEL sinon) est sup閞ieur 3\n"
-"dans /etc/security/msec/security.conf, cr閑r le lien symbolique /etc/"
-"security/msec/server\n"
-"pointant vers /etc/security/msec/server.<SERVER_LEVEL>. Le fichier /etc/"
-"security/msec/server\n"
-"est utilis par chkconfig --add pour d閏ider d'ajouter un service s'il est "
-"pr閟ent dans le fichier\n"
-"pendant l'installation des paquetages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "Saint-Vincent-et-les-Grenadines"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Autorise tous les services contr鬺閟 par tcp_wrappers (voir hosts.deny(5)) "
-"si 珷arg牷 = ALL. Seulement ceux qui sont locaux si\n"
-"珷arg牷 = LOCAL et aucun si 珷arg牷 = NONE. Pour autoriser les services "
-"dont vous avez besoin, utilisez /etc/hosts.allow\n"
-"(voir hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Fichier/_Ouvrir"
#: ../../security/help.pm:1
#, c-format
@@ -13649,1088 +13190,839 @@ msgstr ""
"L'argument sp閏ifie si les clients sont autoris閟 ou non se connecter\n"
"au serveur d'affichage (Xfree) sur le port tcp 6000."
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Permet/interdit les connexions Xfree. Le premier argument sp閏ifie ce qui "
-"est fait\n"
-"du c魌 client: ALL (toutes connexions permises), LOCAL (seulement les "
-"connexions\n"
-"locales) et NONE (aucune connexion)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Permet/interdit la liste des utilisateurs du syst鑝e sur les gestionnaires "
-"de connexion (kdm et gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Permet/interdit la connexion directe en tant que root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active la connexion distante en tant que root."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active le red閙arrage du syst鑝e par l'utilisateur de la console."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Si \\fIarg\\fP = ALL, permet /etc/issue et /etc/issue.net d'exister. Si"
-"\\fIarg\\fP = NONE, seulement /etc/issue est permis."
+msgid "Location of auto_install.cfg file"
+msgstr "Emplacement du fichier auto_install.cfg"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Active/D閟active la connexion automatique (autologin)."
+msgid "Open Firmware Delay"
+msgstr "D閘ai de l'Open Firmware"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accepte/refuse l'閏ho icmp."
+msgid "Hungary"
+msgstr "Hongrie"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accepte/refuse l'閏ho icmp 閙is par diffusion"
+msgid "Total progess"
+msgstr "Avancement:"
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Accepte/refuse les messages d'erreur IPv4 bogu閟."
+msgid "Color configuration"
+msgstr "Configuration des couleurs"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrateur s閏urit (nom d'utilisateur ou adresse de courriel)"
+msgid "New Zealand"
+msgstr "Nouvelle-Z閘ande"
#: ../../security/level.pm:1
#, c-format
msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-"Une biblioth鑡ue qui prot鑗e contre les attaques par d閎ordement de pile.\n"
-"(les plus fr閝uentes)"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Utilisation de 珷libsafe牷 pour les serveurs"
+"Il y a d閖 des restrictions, et des v閞ifications automatiques sont "
+"effectu閑s chaque nuit."
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security level"
-msgstr "Niveau de s閏urit"
+msgid "please choose the date to restore"
+msgstr "Veuillez choisir la date restaurer"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "Choisissez le niveau de s閏urit d閟ir"
+msgid "Switching from ext2 to ext3"
+msgstr "Passage de ext2 ext3"
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Options de base de DrakSec"
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Ce niveau de s閏urit est bas sur le pr閏閐ent mais le syst鑝e est "
-"maintenant\n"
-"compl鑤ement clos (vu du r閟eau). La s閏urit est maximale."
+msgid "Netherlands Antilles"
+msgstr "Antilles n閑rlandaises"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Avec ce niveau de s閏urit, l'utilisation de cette machine en tant que\n"
-"serveur devient envisageable. La s閏urisation est suffisamment forte pour\n"
-"accepter les connexions de nombreux clients. Note: si votre machine est\n"
-"seulement connect閑 en tant que client sur Internet, vous devriez plut魌\n"
-"choisir un niveau inf閞ieur."
+msgid "Browse to new restore repository."
+msgstr "Naviguer dans le nouvel emplacement de sauvegarde."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-"Il y a d閖 des restrictions, et des v閞ifications automatiques sont "
-"effectu閑s chaque nuit."
+"\n"
+"Bienvenue dans l'Assistant de Configuration d'Imprimante\n"
+"\n"
+"Cet assistant permet de configurer des imprimantes locales ou r閟eau afin "
+"d'阾re utilis閑s partir de cette machine ainsi que des autres machines du "
+"r閟eau.\n"
+"\n"
+"Toutes les informations n閏essaires pour configurer l'imprimante vous seront "
+"demand閑s; vous aurez 間alement acc鑣 tous les pilotes d'imprimantes "
+"disponibles ainsi qu' toutes leurs options et tous les types de connexion."
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ceci est le niveau de s閏urit standard recommand pour un ordinateur \n"
-"utilis pour se connecter Internet en tant que client."
+msgid "and %d unknown printers"
+msgstr "et %d imprimantes inconnues"
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-"Les mots de passe sont maintenant requis. Pour autant, il n'est pas\n"
-"recommand d'utiliser cette machine sur un r閟eau."
+"Les premiers Pentium produits ont un bogue dans leur unit de calcul en "
+"nombres flottants qui emp阠he d'avoir la pr閏ision n閏essaire lors d'une "
+"op閞ation de division en flottants (FDIV)."
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-"Ce niveau de s閏urit doit 阾re utilis avec pr閏aution. Il rend votre\n"
-"syst鑝e plus facile utiliser, aux d閜ens de la s閏urit. Il ne devrait\n"
-"donc pas 阾re utilis sur une machine connect閑 un r閟eau ou Internet.\n"
-"Aucun mot de passe n'est requis."
+"Aucune carte RNIS/ISDN identifi閑. Veuillez en s閘ectionner une dans le\n"
+"prochain 閏ran."
-#: ../../security/level.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Parano颽que"
+msgid "GB"
+msgstr "Go"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Higher"
-msgstr "Plus 閘ev閑"
+msgid "Please give a user name"
+msgstr "Veuillez taper un nom d'utilisateur"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "High"
-msgstr "蒷ev閑"
+msgid "Enable CD Boot?"
+msgstr "Autoriser le d閙arrage sur CD?"
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Poor"
-msgstr "Tr鑣 faible"
+msgid " enter `void' for void entry"
+msgstr "Saisissez `void' pour une entr閑 vide"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bienvenue aux pirates"
+msgid "on Hard Drive"
+msgstr "sur disque dur"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Veuillez relancer %s pour activer les changements"
+msgid "Winmodem connection"
+msgstr "Connexion par winmodem"
-#: ../../standalone/XFdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
-"Veuillez vous d閏onnecter puis presser simultan閙ent les touches Ctrl-Alt-"
-"BackSpace"
+"\n"
+"F閘icitation, votre imprimante est maintenant install閑 et configur閑.\n"
+"\n"
+"Vous pouvez imprimer en utilisant la commande 珷imprimer牷 de vos\n"
+"applications (souvent dans le menu 珷fichier牷).\n"
+"\n"
+"Si vous voulez ajouter, enlever ou renommer une imprimante, ou si vous "
+"voulez changer les options par d閒aut (alimentation papier,qualit "
+"d'impression, etc.), rendez-vous dans la partie 珷imprimante牷de la section "
+"珷mat閞iel牷 du Centre de Contr鬺e Mandrake."
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
msgstr ""
-"/etc/hosts.allow et /etc/hosts.deny d閖 configur閟. Aucune modification"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Il faut d'abord cr閑r /etc/dhcpd.conf!"
+"Arguments: (arg)\n"
+"\n"
+"R鑗le la profondeur de l'historique des mots de passe pour 関iter la "
+"r閡tilisation de mots de passe."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Quelque chose s'est mal pass闋! mkisofs est-il bien install闋?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Maintenant vous pouvez lancer xawtv (sous X-Window)!\n"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "L'image ISO etherboot est %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"La partition d'閏hange (swap) est insuffisante pour achever l'installation, "
+"veuillez en ajouter."
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "Aucun lecteur de disquette disponible!"
+msgid "%s on %s"
+msgstr "%s sur %s"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "La disquette peut maintenant 阾re retir閑 du lecteur"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"GNU/Linux manipule l'heure au format GMT (珷Greenwich Mean Time牷) et la\n"
+"convertit en temps local selon le fuseau horaire choisi. Il est n閍nmoins\n"
+"possible de d閟activer cela en d閟閘ectionnant 珷%s牷 de fa鏾n ce que\n"
+"l'horloge mat閞ielle soit la m阭e que celle du syst鑝e. Cela est\n"
+"particuli鑢ement utile si la machine accueille un autre syst鑝e\n"
+"d'exploitation tel que Windows.\n"
+"\n"
+"La 珷%s牷 permet de r間ler l'heure automatiquement en se connectant un\n"
+"serveur de temps sur Internet. Dans la liste qui est alors pr閟ent閑,\n"
+"choisissez un serveur g閛graphiquement proche de vous. Vous devez avoir une\n"
+"connexion Internet pour que cela fonctionne bien entendu. Cela installera\n"
+"en fait sur votre machine un serveur de temps local qui pourra, en option,\n"
+"阾re lui-m阭e utilis par d'autres machines de votre r閟eau local."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Impossible d'acc閐er la disquette!"
+msgid "Which is your timezone?"
+msgstr "Quelle est votre fuseau horaire?"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Veuillez ins閞er une disquette dans le lecteur"
+msgid "Guinea"
+msgstr "Guin閑"
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Write Config"
-msgstr "蒫rire la configuration"
+msgid "The system is now connected to the Internet."
+msgstr "Le syst鑝e est pr閟ent connect Internet."
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Plages d'adresses IP dynamiques"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "G閛rgie du Sud et 蝜es Sandwich du Sud"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"La plupart de ces valeurs ont 閠 extraites\n"
-"de votre syst鑝e. Vous pouvez les modifier\n"
-"comme vous le souhaitez."
+msgid "Japan (broadcast)"
+msgstr "Japon (hertzien)"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Configuration du serveur dhcpd"
+msgid "Mozambique"
+msgstr "Mozambique"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr "Fin de la plage d'adresses IP:"
+msgid "Icon"
+msgstr "Ic鬾e"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
-msgstr "D閎ut de la plage d'adresses IP:"
+msgid "Please choose what you want to backup"
+msgstr "Veuillez choisir ce que vous voulez sauvegarder"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Name Servers:"
-msgstr "Serveurs de nom:"
+msgid "256 colors (8 bits)"
+msgstr "256 couleurs (8 bits)"
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr "Nom de domaine:"
+msgid "Read-write"
+msgstr "Lecture/閏riture"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Broadcast Address:"
-msgstr "Adresse de diffusion (broadcast):"
+msgid "Size: %s\n"
+msgstr "Taille: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Subnet Mask:"
-msgstr "Masque de sous-r閟eau:"
+msgid "Hostname: "
+msgstr "Nom de machine: "
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Routers:"
-msgstr "Routeurs:"
+msgid "Chunk size %s\n"
+msgstr "Taille de bloc %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Netmask:"
-msgstr "Masque de r閟eau:"
+msgid "Build the future of Linux!"
+msgstr "Construisez le futur de Linux !"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Subnet:"
-msgstr "Sous-r閟eau:"
+msgid "Local Printer"
+msgstr "Imprimante locale"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-"Le gestionnaire de connexion doit 阾re red閙arr pour que les changements\n"
-"prennent tous effet. (\"service dm restart\" dans une console)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Configuration de dhcpd..."
+" Copyright (C) 2001-2002 MandrakeSoft par DUPONT S閎astien <dupont_s\\@epita."
+"fr>"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Delete Client"
-msgstr "Effacer un client"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=monfichier] [--word=monmot] [--explain=regexp] [--alert]"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Modifier un client"
+msgid "ADSL connection"
+msgstr "Connexion par ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Add Client -->"
-msgstr "Ajouter un client -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
+"La configuration de sauvegarde n'est pas encore d閒inie. \n"
+"Veuillez cliquer sur 珷Configuration par assistant牷, ou 珷Configuration "
+"manuelle牷\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr "Autoriser les client l間ers"
+msgid "Error!"
+msgstr "Erreur!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Thin Client"
-msgstr "Client l間er"
+msgid "cable connection detected"
+msgstr "connexion par C鈈le d閠ect閑"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No net boot images created!"
-msgstr "Aucune image d'amor鏰ge r閟eau cr殚e"
+msgid "Permission denied transferring %s to %s"
+msgstr "Vous n'avez pas le droit de transf閞er %s vers %s"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "type: %s"
-msgstr "type: %s"
+msgid "/_Report Bug"
+msgstr "/_Signaler une bogue"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr "<-- Effacer un utilisateur"
+msgid "Resize"
+msgstr "Redimensionner"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "Ajouter un utilisateur -->"
+msgid "Dominica"
+msgstr "Dominique"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Ceci indique que le mot de passe connu par le syst鑝e est diff閞ent de "
-"celui\n"
-"connu par le Terminal Server. Effacez et ajoutez nouveau l'utilisateur\n"
-"au Terminal Server pour permettre la connexion."
+msgid "Please enter the device name to use for backup"
+msgstr "Nom de p閞iph閞ique du mat閞iel de sauvegarde (/dev/...?)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Delete All NBIs"
-msgstr "Effacer toutes les NBI"
+msgid "Resolution: %s\n"
+msgstr "R閟olution: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "<-- Delete"
-msgstr "<-- Effacer"
+msgid "matching"
+msgstr "contenant"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "Cela va prendre quelques minutes."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"Impossible d'acc閐er aux modules correspondant votre noyau (le fichier %s "
+"est manquant), cela veut g閚閞alement dire que votre disquette d'amor鏰ge "
+"n'est plus jour par rapport votre p閞iph閞ique d'installation (veuillez "
+"cr閑r une disquette d'amor鏰ge plus r閏ente)"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "Construire tous les noyaux -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"S閘ectionnez le bon port. Par exemple: l'閝uivalent du port 珷COM1牷 sur\n"
+"Windows, se nomme 珷ttyS0牷 sous GNU/Linux."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "No NIC selected!"
-msgstr "Aucune interface r閟eau s閘ectionn閑!"
+msgid "The following packages are going to be removed"
+msgstr "Les paquetages suivants vont 阾re d閟install閟"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr "Construire un NIC unique -->"
+msgid "Connect to the Internet"
+msgstr "Connexion Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No kernel selected!"
-msgstr "Aucun noyau s閘ectionn闋!"
+msgid "Use existing partitions"
+msgstr "Utiliser une partition existante"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Construire le noyau entier -->"
+msgid "Canadian (Quebec)"
+msgstr "Canadien (Qu閎ec)"
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr "Image ISO de d閙arrage"
+msgid "Mouse device: %s\n"
+msgstr "P閞iph閞ique: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Boot Floppy"
-msgstr "Disquette de d閙arrage"
+msgid "Reselect correct fonts"
+msgstr "Res閘ectionnez des polices correctes"
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
+"Options Description:\n"
"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
"\n"
msgstr ""
-"Survol de drakTermServ\n"
-"\t\t\t \n"
-" - Cr閑r des images d'amor鏰ge Etherboot:\n"
-" \t\tPour amorcer un noyau par etherboot, un noyau et un initrd "
-"sp閏iaux doivent 阾re cr閑s.\n"
-" \t\tmkinitrd-net fait une grande partie de ce travail et "
-"drakTermServ est simplement une interface graphique\n"
-" \t\tpour aider g閞er et personnaliser ces images.\n"
-"\n"
-" - Maintenir /etc/dhcpd.conf:\n"
-" \t\tPour pouvoir 阾re amorc par le r閟eau, chaque client a besoin "
-"d'une entr閑 dans le fichier dhcpd.conf, pour lui assigner une adresse IP\n"
-" \t\tet des images d'amor鏰ge. drakTermServ permet de cr閑r ou "
-"retirer ces entr閑s.\n"
-"\t\t\t\n"
-" \t\t(Les cartes PCI peuvent omettre l'image, etherboot demandera "
-"l'image correcte. Il faut aussi\n"
-" \t\ttenir compte du fait que quand etherboot cherche des images, il "
-"s'attend trouver des noms comme\n"
-" \t\tboot-3c59x.nbi, plut魌 que boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tUne strophe habituelle de dhcpd.conf pour le support d'un client "
-"l間er ressemble 酄:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tBien que vous pouvez utiliser une plage d'adresses IP plut魌 qu'une "
-"entr閑\n"
-"\t\t\tsp閏ifique pour chaque machine client, l'utilisation d'adresses fixes "
-"permet de profiter\n"
-"\t\t\tde configurations s閜ar閑s par client pour les fonctions que fournit "
-"ClusterNFS.\n"
-"\t\t\t\t\t\tRemarque: L'entr閑 \"#type\" est utilis閑 seulement par "
-"drakTermServ. Les clients peuvent 阾re soit\n"
-"\t\t\t\"l間ers\", soit \"lourd\". Les clients l間ers font tourner la plupart "
-"des logiciels sur le serveur via xdmcp, \n"
-"\t\t\ttandis que les clients lourds font tourner eux-m阭es leurs logiciels. "
-"Un fichier inittab sp閏ial, /etc/inittab\\$\\$IP=client_ip\\$\\$ est\n"
-"\t\t\t閏rit pour les clients l間ers. Les fichiers de configuration syst鑝e "
-"xdm-config, kdmrc, et gdm.conf sont modifi閟\n"
-"\t\t\tsi des clients l間ers sont utilis閟, pour pouvoir activer xdmcp. 蓆ant "
-"donn que xdmcp pose des probl鑝es de s閏urit,\n"
-"\t\t\tles fichiers hosts.deny et hosts.allow sont modifi閟 pour limiter "
-"l'acc鑣 au sous-r閟eau local.\n"
-"\t\t\t\n"
-"\t\t\tRemarque: vous devez red閙arrer le serveur apr鑣 avoir ajout ou "
-"modifi des clients.\n"
-"\t\t\t\n"
-" - Maintenir /etc/exports:\n"
-" \t\tClusternfs permet d'exporter la partition racine (/) vers les "
-"clients l間ers. drakTermServ fait les\n"
-" \t\tmodifications n閏essaires pour autoriser les clients l間ers y "
-"acc閐er de fa鏾n anonyme.\n"
-"\n"
-" \t\tUne entr閑 typique dans ce fichier est:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tAvec SUBNET/MASK d閒ini pour votre r閟eau.\n"
-" \t\t\n"
-" - Maintenir /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tPour que les utilisateurs puissent se connecter au syst鑝e "
-"partir d'un client l間er, l'entr閑 leur correspondant\n"
-" \t\tdans /etc/shadow doit 阾re dupliqu閑 dans /etc/shadow\\$\\"
-"$CLIENTS\\$\\$.\n"
-" \t\tDrakTermServ permet cet effet d'ajouter ou de retirer des "
-"utilisateurs de ce fichier.\n"
-"\n"
-" - Fichier par client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tAvec clusternfs, chaque client l間er peut avoir son propre "
-"fichier de configuration unique\n"
-" \t\tsur la partition racine du serveur. DrakTermServ permettra plus "
-"tard de cr閑r ces fichiers.\n"
-"\n"
-" - Fichiers de configuration syst鑝e par client:\n"
-" \t\tAvec clusternfs, chaque client l間er peut avoir ses propres "
-"fichiers de configuration\n"
-" \t\tsur la partition racine du serveur. DrakTermServ permettra plus "
-"tard de cr閑r des fichiers\n"
-" \t\tcomme /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard, s閜ar閟\n"
-" \t\tpour chaque client.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tDrakTermServ peut configurer ces fichiers pour fonctionner en "
-"conjonction avec les images cr閑s par mkinitrd-net,\n"
-" \t\tet les entr閑s dans /etc/dhcpd.conf pour mettre les images "
-"d'amor鏰ge disposition des clients l間ers.\n"
-"\n"
-" \t\tUn fichier de configuration typique ressemble ceci:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tIci les diff閞ences par rapport l'installation par d閒aut sont "
-"le drapeau 'disable' mis 'no'\n"
-" \t\tet le chemin d'acc鑣 tftpboot mis \"/var/lib/tftpboot\", o "
-"mkinitrd-net place ses images.\n"
+"description des options:\n"
"\n"
-" - Cr閑r des disquettes ou CD etherboot:\n"
-" \t\tLes clients l間ers ont besoin d'une image d'amor鏰ge plac閑 sur "
-"la m閙oire morte (ROM) de la carte r閟eau,\n"
-" \t\tou bien d'un CD ou d'une disquette pour initier la s閝uence "
-"d'amor鏰ge. drakTermServ permet de g閚閞er ces images,\n"
-" \t\tbas閑s sur les cartes r閟eaux des machines clientes.\n"
-" \t\t\n"
-" \t\tUn exemple simple de cr閍tion manuelle de disquette d'amor鏰ge "
-"pour une carte 3Com 3c509 consiste taper:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Attention en utilisant la sauvegarde par FTP, car seulement \n"
+"les sauvegardes d閖 construites sont envoy閑s vers le serveur.\n"
+"Ainsi, pour le moment, vous devez faire une sauvegarde sur disque dur\n"
+"avant de l'envoyer vers le serveur.\n"
"\n"
-#: ../../standalone/drakTermServ:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
+"Options\n"
"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"Options\n"
"\n"
-"\n"
-" Remerciements:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+" Vous pourrez finalement choisir ici de d閙arrer l'interface graphique au\n"
+"lancement de la machine. Il est pr閒閞able de choisir 珷%s牷 si vous 阾es\n"
+"en train d'installer un serveur, ou si vous n'avez pas r閡ssi configurer\n"
+"l'閏ran correctement."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Copyright (C) 2002 par MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Nous allons configurer la connexion %s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Add/Del Clients"
-msgstr "Ajouter/Effacer un client"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Corporate"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Add/Del Users"
-msgstr "Ajouter/Effacer un utilisateur"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
+msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "d閠ection automatique d'imprimantes"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "impossible de trouver des polices.\n"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr "Images d'amor鏰ge r閟eau"
+msgid "Language"
+msgstr "Choix de la langue"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "disquette/ISO etherboot"
+msgid "Printer model selection"
+msgstr "S閘ection du mod鑜e de l'imprimante"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Stop Server"
-msgstr "Arr阾er le serveur"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr ""
+"Apr鑣 avoir modifi le type de la partition %s, toutes les donn閑s\n"
+"pr閟entes sur cette partition seront perdues."
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Start Server"
-msgstr "Lancer le serveur"
+msgid "%d seconds"
+msgstr "%d secondes"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Disable Server"
-msgstr "D閟activer le serveur"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Ins閞ez une disquette vierge dans le lecteur %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Enable Server"
-msgstr "Activer le serveur"
+msgid "A valid URI must be entered!"
+msgstr "Une adresse valide doit 阾re entr閑!"
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Configuration du Serveur de Terminaux Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Interface trouv閑: 珷%s牷. Voulez-vous l'utiliser?"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Remove the last item"
-msgstr "Supprimer le dernier 閘閙ent"
+msgid "Re-configure interface and DHCP server"
+msgstr "Reconfigurer l'interface et le serveur DHCP"
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Add an item"
-msgstr "Ajouter un 閘閙ent"
+msgid "Sound configuration"
+msgstr "Configuration du son"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "Installation automatique"
+msgid "Photo test page"
+msgstr "Page de test photo"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"La disquette a 閠 g閚閞閑 avec succ鑣.\n"
-"Vous pouvez maintenant rejouer votre installation."
+msgid "Custom disk partitioning"
+msgstr "Partitionnement personnalis"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Congratulations!"
-msgstr "F閘icitations!"
+msgid "Enter Printer Name and Comments"
+msgstr "Entrez un nom d'imprimante et un commentaire."
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
+"The following printers\n"
"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"Les imprimantes suivantes:\n"
"\n"
-"Bienvenue.\n"
-"\n"
-"Les param鑤res de l'installation automatique sont disponibles dans les "
-"sections sur la gauche."
+"%s%s\n"
+"sont connect閑s directement votre syst鑝e."
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "Cr閍tion de la disquette d'auto-installation"
+msgid "type: %s"
+msgstr "type: %s"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "manual"
-msgstr "manuel"
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaque (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Veuillez choisir, pour chaque 閠ape, si celle-ci doit 阾re rejou閑 comme "
-"pendant votre installation, ou si elle doit s'effectuer manuellement."
+msgid "No Sound Card detected!"
+msgstr "Aucune carte son d閠ect閑!"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Configuration des 閠apes automatiques"
+msgid "Mouse Port"
+msgstr "Port souris"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "replay"
-msgstr "rejouer"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"Le gestionnaire de connexion doit 阾re red閙arr pour que les changements\n"
+"prennent tous effet. (\"service dm restart\" dans une console)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Serveur FTP"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
msgstr ""
-"Vous 阾es sur le point de configurer une disquette d'auto-installation. "
-"Cette fonction est relativement dangereuse, et doit donc 阾re utilis閑 avec "
-"pr閏aution.\n"
-"\n"
-"La disquette d'auto-installation vous permettra d'installer un autre "
-"ordinateur avec exactement la m阭e configuration que le v魌re. Mais parmi "
-"l'ensemble des 閠apes d'installation, vous pouvez choisir lesquelles seront "
-"compl鑤ement automatis閑s et lesquelles seront manuelles.\n"
-"Pour une s鹯et maximale, les 閠apes de partitionnement et de formatage ne "
-"seront jamais faites automatiquement, quels que soient les choix que vous "
-"aviez fait lors de la premi鑢e installation de cet ordinateur.\n"
+"Arguments: (arg)\n"
"\n"
-"Souhaitez-vous continuer?"
+"Active/D閟active les v閞ifications de msec toutes les heures."
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Configurateur d'installation automatis閑"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "Conversion de polices 珷pfm牷"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Impossible de trouver le fichier image 珷%s牷."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Le type de bus sur lequel la souris est connect閑"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error!"
-msgstr "Erreur!"
+msgid "Uganda"
+msgstr "Ouganda"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (size)\n"
"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
+"Arguments: (size)\n"
"\n"
-"Probl鑝es de restauration:\n"
-"\n"
-"Avant l'閠ape de restauration, Drakbackup va v閞ifier tous vos\n"
-"fichiers de sauvegarde. Les dossiers originaux seront effac閟\n"
-"et vous allez perdre toutes vos donn閑s. Il est important de \n"
-"faire les choses avec pr閏aution et de ne pas modifier la main\n"
-"les fichiers de sauvegarde.\n"
+"R間lez la profondeur de l'historique du shell. Une valeur de -1 signifie "
+"historique illimit."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-msgstr ""
-"description des options:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Attention en utilisant la sauvegarde par FTP, car seulement \n"
-"les sauvegardes d閖 construites sont envoy閑s vers le serveur.\n"
-"Ainsi, pour le moment, vous devez faire une sauvegarde sur disque dur\n"
-"avant de l'envoyer vers le serveur.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-"Description:\n"
+"On vous pr閟ente ici diverses informations sur la configuration actuelle.\n"
+"Selon le mat閞iel install, certaines entr閑s seront pr閟entes et d'autres\n"
+"pas. Chaque param鑤re est constitu du nom de la configuration, suivi d'un\n"
+"cours r閟um de la configuration actuelle. Cliquez sur le bouton 珷%s牷\n"
+"correspondant pour changer cela.\n"
"\n"
-" Drakbackup sert sauvegarder votre syst鑝e.\n"
-" Pendant sa configuration vous pouvez s閘ectionner: \n"
-"\t- des fichiers syst鑝es, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres donn閑s,\n"
-"\tou Tout votre syst鑝e ... et d'autres (comme des partitions Windows)\n"
+" * 珷%s牷: v閞ifiez la configuration choisie pour le clavier.\n"
"\n"
-" Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CD-Rom, DVD (avec auto-amor鏰ge, r閏up閞ation et auto-install.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
+" * 珷%s牷: v閞ifiez la section du pays. Si vous ne vous trouvez pas dans ce\n"
+"pays, cliquez sur le bouton 珷%s牷 et choisissez le bon. Si votre pays ne\n"
+"se trouve pas dans la premi鑢e liste, cliquez sur 珷%s牷 pour avoir la\n"
+"liste compl鑤e.\n"
"\n"
-" Drakbackup peut restaurer votre syst鑝e vers un dossier choisi.\n"
+" * 珷%s牷: DrakX, par d閒aut, configure le fuseau horaire selon le pays\n"
+"dans lequel vous 阾es. Cliquez sur 珷%s牷 pour le changer.\n"
"\n"
-" Par d閒aut toute sauvegarde sera stock閑 dans le\n"
-" dossier /var/lib/drakbackup\n"
+" * 珷%s牷: pour v閞ifier la configuration actuelle de la souris. Cliquez\n"
+"sur le bouton pour modifier les options.\n"
"\n"
-" Fichier de configuration:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * 珷%s牷: en cliquant sur 珷%s牷, l'outil de configuration d'impression\n"
+"sera d閙arr. Consultez le chapitre correspondant du 珷Guide de d閙arrage牷\n"
+"pour plus de renseignements. L'interface qui y est document閑 est similaire\n"
+" celle rencontr閑 lors de l'installation.\n"
"\n"
-"蓆ape de restauration:\n"
-" \n"
-" Pendant l'閠ape de restauration, DrakBackup va retirer \n"
-" votre dossier d'origine et v閞ifier qu'aucun fichier\n"
-" de sauvegarde n'est corrompu. Il est recommand \n"
-" de faire une derni鑢e sauvegarde avant restauration.\n"
+" * 珷%s牷 : si une carte son a 閠 d閠ect閑, elle appara顃ra ici. Si vous\n"
+"remarquez que la carte configur閑 n'est pas celle qui se trouve\n"
+"effectivement sur votre syst鑝e, vous pouvez cliquer sur le bouton pour en\n"
+"choisir une autre.\n"
+"\n"
+" * 珷%s牷 : par d閒aut, DrakX configure votre interface graphique avec une\n"
+"r閟olution de 珷800x600牷 ou 珷1024x768牷. Si cela ne vous convient pas,\n"
+"cliquez sur 珷%s牷 pour changer la configuration de votre interface\n"
+"graphique.\n"
"\n"
+" * 珷%s牷 : si une carte d'entr閑/sortie vid閛 (carte TV) a 閠 d閠ect閑,\n"
+"elle appara顃ra ici. Si vous avez une carte TV et qu'elle n'a pas 閠閈n"
+"d閠ect閑, cliquez sur le bouton 珷%s牷 pour la configurer la main.\n"
"\n"
+" * 珷%s牷 : si une carte RNIS (ISDN) est d閠ect閑, elle appara顃ra ici.\n"
+"Vous pouvez cliquer sur 珷%s牷 pour en modifier les param鑤res.\n"
+"\n"
+" * 珷%s牷 : Si vous souhaitez configurer votre acc鑣 Internet ou r閟eau\n"
+"local d鑣 maintenant.\n"
+"\n"
+" * 珷%s牷: il vous est ici propos de red閒inir votre niveau de s閏urit閈n"
+"tel que d閒ini dans une 閠ape pr閏閐ente ().\n"
+"\n"
+" * 珷%s牷 : si vous avez l'intention de connecter votre ordinateur 郳n"
+"Internet, c'est une bonne id閑 de le prot間er des intrusions gr鈉e un\n"
+"pare-feu. Consultez la section correspondante du 珷Guide de d閙arrage牷\n"
+"pour plus de renseignements.\n"
+"\n"
+" * 珷%s牷 : Si vous souhaitez changer la configuration par d閒aut de votre\n"
+"chargeur de d閙arrage. r閟erver aux utilisateurs exp閞iment閟.\n"
+"\n"
+" * 珷%s牷 : vous pourrez ici contr鬺er finement les services disponibles\n"
+"sur votre machine. si vous envisagez de monter un serveur, c'est une bonne\n"
+"id閑 de v閞ifier cette configuration."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Comores"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
-" modifications 2002 MandrakeSoft par Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+"\n"
+"\n"
+"\n"
+"Nous allons maintenant configurer la connexion %s.\n"
+"\n"
+"\n"
+"Cliquez sur OK pour continuer."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Menu d'amor鏰ge"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "USA (c鈈le)"
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
-" Copyright (C) 2001-2002 MandrakeSoft par DUPONT S閎astien <dupont_s\\@epita."
-"fr>"
+"Impossible de relancer LILO!\n"
+"Lancez 珷lilo牷 dans une ligne de commande en 閠ant root pour terminer "
+"l'installation du th鑝e de LILO."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Souris standard 3 boutons"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Select another media to restore from"
+msgstr "Choisir un autre support de sauvegarde"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Gestionnaire de programmes"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -14742,17 +14034,19 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
"description de la restauration:\n"
@@ -14779,5086 +14073,5818 @@ msgstr ""
"\n"
"\n"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"description des options:\n"
-"\n"
-" - Sauvegarde des fichiers syst鑝es:\n"
-" \n"
-"\tCette option vous permet de sauvegarder votre dossier /etc,\n"
-"\tqui contient tous les fichiers de configuration. Faites attention\n"
-"\tpendant la restauration de ne pas 閏raser:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Sauvegarde des comptes utilisateurs:\n"
-"\n"
-"\tCette option vous permet de choisir les utilisateurs \n"
-"\t sauvegarder.\n"
-"\tPour pr閟erver l'espace disque, il est recommand閈n"
-"\tde ne pas inclure les dossiers 珷cache牷 des navigateurs.\n"
-"\n"
-" - Sauvegarde des autres fichiers: \n"
-"\n"
-"\tCette option vous permet d'ajouter d'autres donn閑s\n"
-"\t sauvegarder. Pour l'instant il n'est pas possible de faire\n"
-"\tune sauvegarde incr閙entale avec cette option.\t\t\n"
-" \n"
-" - Sauvegardes incr閙entales:\n"
-"\n"
-"\tLa sauvegarde incr閙entale est l'option la \n"
-"\tplus puissante pour la sauvegarde. Elle vous permet \n"
-"\tde tout sauver la premi鑢e fois, puis seulement les \n"
-"\tchangements les fois suivantes.\n"
-"\tAinsi vous serez capable de restaurer les donn閑s\n"
-"\tcorrespondant n'importe quelle sauvegarde pr閏閐ente.\n"
-"\t\n"
-"\tSi vous n'avez pas s閘ectionn cette option, toutes\n"
-"\tvos sauvegardes pr閏閐entes sont pr閍lablement effac閑s. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Certaines erreurs lors de l'envoi de courriels peuvent 阾re caus閑s par\n"
-" une mauvaise configuration de postfix. Pour le r閟oudre, vous devez\n"
-" configurer le nom de machine ou de domaine dans /etc/postfix/main.cf.\n"
-"\n"
+msgid "Re-submit"
+msgstr "Revalider"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"description des options:\n"
-"\n"
-" cette 閠ape, Drakbackup vous permet de changer:\n"
-"\n"
-" - Le mode de compression:\n"
-" \n"
-" Si vous cochez la compression bzip2, vous compresserez\n"
-" mieux qu'avec gzip (de 2 10 %%).\n"
-" Cette option n'est pas choisie par d閒aut\n"
-" parce qu'elle est beaucoup plus lente (1000%% de plus).\n"
-" \n"
-" - Le mode de mise jour:\n"
-"\n"
-" Cette option met jour votre sauvegarde, mais\n"
-" n'est pas vraiment utile car vous devez la\n"
-" d閏ompresser avant de la mettre jour.\n"
-" \n"
-" - le mode .backupignore:\n"
-"\n"
-" Comme avec CVS, Drakbackup va ignorer les r閒閞ences\n"
-" incluses dans les fichiers .backupignore de chaque dossier.\n"
-" ex: \n"
-" #> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Le CD et en place - continuer."
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "Ko"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restore"
-msgstr "Restaurer!"
+msgid "Network & Internet"
+msgstr "R閟eau et Internet"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup Now"
-msgstr "Sauvegarder!"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituanien 珷phon閠ique牷 QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Advanced Configuration"
-msgstr "Configuration manuelle"
+msgid "Net Boot Images"
+msgstr "Images d'amor鏰ge r閟eau"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wizard Configuration"
-msgstr "Configuration par assistant"
+msgid "Sharing of local scanners"
+msgstr "Partage de scanners locaux"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr "Voir la configuration de sauvegarde"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "蒫hec de l'interrogation 珷Plug'n Play牷. Veuillez choisir un moniteur"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Sauvegarder partir de la configuration d閒inie"
+msgid "Services and deamons"
+msgstr "Serveurs et services"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Configuration de sauvegarde Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Nom du serveur distant manquant!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
-msgstr "TOTAL:"
+msgid "with /usr"
+msgstr "avec /usr"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sending files..."
-msgstr "Envoi des fichiers..."
+msgid "Network"
+msgstr "R閟eau"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr "Envoi par FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"D閠ecter automatiquement les imprimantes reli閑s des machines sous windows"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup other files"
-msgstr "Sauvegarde des autres fichiers ou dossiers..."
+msgid "This password is too simple"
+msgstr "Ce mot de passe est trop simple"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
-msgstr "Sauvegarde des comptes utilisateurs..."
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaque (QWERTZ)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Backup system files"
-msgstr "Sauvegarde des fichiers syst鑝es..."
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+"Programmer en utilisant des langages aussi diff閞ents que Perl, Python, C ou "
+"C++ n'a jamais 閠 aussi facile gr鈉e GNU gcc 3 et les meilleurs outils de "
+"d関eloppement Open Source."
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
-msgstr "En d関eloppement ... veuillez patienter."
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Installation vraiment minimale (et en particulier pas d'urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
-"La configuration de sauvegarde n'est pas encore d閒inie. \n"
-"Veuillez cliquer sur 珷Configuration par assistant牷, ou 珷Configuration "
-"manuelle牷"
+"Transfert \n"
+"Maintenant"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please select data to backup..."
-msgstr "Veuillez choisir les donn閑s sauvegarder..."
+msgid "Use daemon"
+msgstr "Sauvegarde p閞iodique"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Please select media for backup..."
-msgstr "Veuillez choisir le support de sauvegarde..."
+msgid "Authentication"
+msgstr "Authentification"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
-msgstr "Veuillez choisir les donn閑s restaurer..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ajouter cette imprimante StarOffice/OpenOffice"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Les paquetages suivants doivent 阾re install閟:\n"
+msgid "Additional CUPS servers: "
+msgstr "Serveurs CUPS additionnels:"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-"Erreur pendant l'envoi du fichier par FTP.\n"
-" Veuillez corriger votre configuration FTP"
+"Choisissez une imprimante parmi celles qui ont 閠 d閠ect閑s, ou entrez un "
+"nom de machine ou une adresse IP et le num閞o port optionnel (9100 par "
+"d閒aut)."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "O d閟irez-vous monter %s?"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Restore Via Network"
+msgstr "Restaurer partir du r閟eau"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Alg閞ie"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Taille du RamDisk"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
+#, c-format
msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-"Impossible d'envoyer un courrier\n"
-" Votre rapport n'a pas 閠 envoy.\n"
-" Veuillez configurer 珷sendmail牷"
+"Dans le cas o diff閞ents serveurs seraient disponible pour votre carte,\n"
+"avec ou sans acc閘閞ation 3D, il vous est alors propos de choisir le\n"
+"serveur qui vous conviendra le mieux."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Next"
-msgstr "Suivant ->"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tLa sauvegarde utilise 珷tar牷 et 珷gzip牷\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Previous"
-msgstr "<- Pr閏閐ent"
+msgid "2 MB"
+msgstr "2 Mo"
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Save"
-msgstr "Valider"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+" --no-confirmation ne demande pas la premi鑢e confirmation en mode "
+"MandrakeUpdate\n"
+" --no-verify-rpm ne v閞ifie pas les signatures des paquetages\n"
+" --changelog-first affiche le changelog avant la liste des fichiers "
+"dans la fen阾re de description\n"
+" --merge-all-rpmnew propose de fusionner tous les fichiers .rpmnew/."
+"rpmsave trouv閟"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build Backup"
-msgstr "Sauvegarder!"
+msgid "Setting Default Printer..."
+msgstr "Configuration de l'imprimante par d閒aut..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Restore Progress"
-msgstr "Avancement de la restauration"
+msgid "Interface %s (using module %s)"
+msgstr "Interface %s (utilisant le module %s)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr "Restaurer partir d'un catalogue"
+msgid "Name: %s\n"
+msgstr "Nom: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Browse to new restore repository."
-msgstr "Naviguer dans le nouvel emplacement de sauvegarde."
+msgid "Generating preview ..."
+msgstr "Cr閍tion de l'aper鐄 ..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "CD in place - continue."
-msgstr "Le CD et en place - continuer."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"La fr閝uence doit avoir un suffixe k, M ou G (par ex. \"2.46G\" pour 2.46 "
+"GHz), ou bien avoir suffisamment de z閞os."
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "Restauration personnalis閑..."
+msgid "serial"
+msgstr "s閞ie"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Restore all backups"
-msgstr "Restaurer toutes les sauvegardes..."
+msgid "DVD-ROM"
+msgstr "DVD"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr "蒫hec de la restauration..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "G閛rgien (disposition latine)"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Files Restored..."
-msgstr "Fichiers restaur閟..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
+"Obtenez le meilleur avec les partenaires strat間iques de Mandrake Linux"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr "Le chemin ou le module est n閏essaire"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"Vous pouvez maintenant fournir des options au module %s.\n"
+"Veuillez noter que les adresses doivent 阾re pr閏閐閑s de 0x, comme 珷0x123牷"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Hostname required"
-msgstr "Nom de machine爊閏essaire"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
+"Mandrake Linux 9.1 est livr閑 avec Mandrake Control Center. Ce puissant "
+"logiciel vous permet d'adapter votre ordinateur vos besoins. Configurez "
+"des 閘閙ents tels que le niveau de s閏urit, vos p閞iph閞iques (閏ran, "
+"souris, clavier...), la connexion Internet et plus encore !"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Username required"
-msgstr "Nom d'utilisateur n閏essaire"
+msgid "Kenya"
+msgstr "Kenya"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Password required"
-msgstr "Mot de passe n閏essaire"
+msgid "Use ``Unmount'' first"
+msgstr "Cliquez d'abord sur 珷D閙onter牷"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host Path or Module"
-msgstr "Chemin de l'h魌e ou du module"
+msgid "Installing mtools packages..."
+msgstr "Installation des paquetages mtools..."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Host Name"
-msgstr "Nom d'h魌e"
+msgid "You must specify a root partition"
+msgstr "Vous devez sp閏ifier une partition racine"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restaurer via le Protocole R閟eau: %s"
+msgid "first step creation"
+msgstr "Cr閍tion de la 1ere 閠ape"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr "Restaurer partir du r閟eau"
+msgid "Both Shift keys simultaneously"
+msgstr "Deux touches Shift simultan閙ent"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ce n'est pas la bonne bande. Celle-ci s'appelle %s."
+msgid "Select a scanner model"
+msgstr "S閘ectionnez un mod鑜e de scanner"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Ins閞ez la bande ayant pour nom %s\n"
-"dans le lecteur de bande %s."
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR Nouvelle G閚閞ation"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From Tape"
-msgstr "Restaurer partir d'une bande"
+msgid "Drakbackup Configuration"
+msgstr "Configuration de sauvegarde Drakbackup"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ce n'est pas le bon CD. Celui-ci est intitul %s."
+msgid "Save as.."
+msgstr "Enregistrer sous..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-"Ins閞ez le CD %s dans le lecteur correspondant\n"
-"au point de montage /mnt/cdrom"
+"Cette interface n'a pas encore 閠 configur閑.\n"
+"Lancez l'assistant de configuration dans la fen阾re principale"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore From CD"
-msgstr "Restaurer partir d'un CD"
+msgid "Korea (North)"
+msgstr "Cor閑 du Nord"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr "Fichiers de sauvegardes non trouv閟 sur %s."
+msgid "Autologin"
+msgstr "Connexion automatique"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Changer le\n"
-"chemin de sauvegarde"
+msgid "System configuration"
+msgstr "Configuration du syst鑝e"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
+msgstr "Mot de passe d'administration de domaine"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-"Restaurer les\n"
-"fichiers choisis"
+"Adaptez votre ordinateur vos besoins gr鈉e aux 11 interfaces utilisateurs "
+"enti鑢ement param閠rables : KDE 3.1, Gnome 2.2, Window Maker, ..."
-# whom is selected, the entry or the catalog?
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Configuration de l'imprimante en cours..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-"R閠ablir l'entr閑\n"
-"du catalogue choisi."
+"Afin d'assurer l'int間rit des donn閑s apr鑣 le redimensionnement de(s) "
+"partition(s),\n"
+"une v閞ification du syst鑝e de fichier sera r閍lis au prochain d閙arrage de "
+"Windows(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr "Retirer les dossiers personnels des utilisateurs avant restauration"
+msgid "MB"
+msgstr "Mo"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Nouvelle sauvegarde avant restauration (seulement pour l'incr閙ental)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr ""
+"Si oui, effectue des v閞ifications par rapport la base de donn閑s des "
+"paquetages rpm."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Choisir un chemin de restauration ( au lieu de / )"
+msgid "Virgin Islands (British)"
+msgstr "蝜es Vierges (Britanniques)"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Other"
-msgstr "Restaurer les autres fichiers ou dossiers"
+msgid "Bermuda"
+msgstr "Bermudes"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Restore Users"
-msgstr "Restaurer les comptes utilisateurs"
+msgid "click here if you are sure."
+msgstr "Cliquez ici si vous 阾es s鹯"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore system"
-msgstr "Restaurer le syst鑝e"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"La configuration de sauvegarde n'est pas encore d閒inie. \n"
+"Veuillez cliquer sur 珷Configuration par assistant牷, ou 珷Configuration "
+"manuelle牷"
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Other Media"
-msgstr "Autre support"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"La liste pr閟ent閑 plus haut identifie les partitions GNU/Linux d閠ect閑s\n"
+"sur votre syst鑝e. Vous pouvez accepter les choix propos閟 par l'assistant,\n"
+"qui s'av鑢ent bon dans la grande majorit des cas. Si vous faites un\n"
+"changement, vous devez au moins avoir une partition root (\"/\"). root\n"
+"partition (珷/牷). Prenez garde de vous r閟erver suffisamment d'espace pour\n"
+"installer toutes les applications qui vous int閞essent. Vous devrez\n"
+"間alement cr閑r une partition 珷 /home牷. Ceci s'av鑢e exclusivement\n"
+"possible lorsque vous avez d閖 au moins une partition GNU/Linux de\n"
+"configur閑.\n"
+"\n"
+"Chaque partition est list閑 comme suit: \"Nom\", \"Capacit閈".\n"
+"\n"
+"Le \"Nom\" est structur ainsi : \"type de disque dur\", \"num閞o du disque\n"
+"dur\", \"num閞o de partition\". Par exemple, 珷hda1牷.\n"
+"\n"
+"Le \"Type de disque dur\" correspond hd si votre disque est IDE. Pour un\n"
+"disque SCSI, vous lirez \"sd\".\n"
+"\n"
+"Le num閞o du disque est toujours list apr鑣 le \"hd\" ou \"fd\". Pour les\n"
+"disques IDE :\n"
+"\n"
+" * \"a\" signifie \"disque primaire ma顃re sur le premier contr鬺eur IDE\";\n"
+"\n"
+" * \"b\" signifie le \"disque primaire esclave sur le premier contr鬺eur\n"
+"IDE\";\n"
+"\n"
+" * \"c\" indique le \"disque primaire ma顃re sur le second contr鬺eur\n"
+"IDE\";\n"
+"\n"
+" * \"d\" signifie le \"disque primaire esclave sur le second contr鬺eur\n"
+"IDE\";\n"
+"\n"
+"Avec les disques SCSI, le \"a\" indique le plus petit SCSI ID, et 珷b牷 le\n"
+"珷deuxi鑝e plus petit ID牷, etc."
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Select another media to restore from"
-msgstr "Choisir un autre support de sauvegarde"
+msgid "Remove"
+msgstr "Enlever l'閘閙ent s閘ectionn"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "Veuillez entrer le dossier o r閟ident les sauvegardes"
+msgid "Lesotho"
+msgstr "Lesotho"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaurer partir d'un dossier"
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr "Limiter la taille de la sauvegarde"
+msgid "Pipe job into a command"
+msgstr "Impression vers une commande shell"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr "Taille maximale de sauvegarde:"
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "nouveau nom de p閞iph閞ique dynamique g閚閞 par devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr "Dossier o poser la sauvegarde:"
+msgid "Yes"
+msgstr "Oui"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Sauvegarde sur disque dur"
+msgid "Cote d'Ivoire"
+msgstr "C魌e d'Ivoire"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "please choose the date to restore"
-msgstr "Veuillez choisir la date restaurer"
+msgid "Which protocol do you want to use?"
+msgstr "Quel protocole d閟irez-vous utiliser?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup the system files before:"
-msgstr "Sauvegarder les fichiers syst鑝e avant:"
+msgid "Restore Progress"
+msgstr "Avancement de la restauration"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Fichiers de sauvegarde restaurer (seul le plus r閏ent compte)"
+msgid "Estonia"
+msgstr "Estonie"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "OK to restore the other files."
-msgstr "OK pour restaurer les autres fichiers."
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr ""
+"Choisissez l'h魌e partir duquel les scanners locaux seront disponibles:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid " Restore Configuration "
-msgstr " Restauration de la configuration "
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Il y a un espace vide dans la table des partitions mais il est\n"
+"inutilisable. La seule solution est de d閜lacer vos partitions primaires\n"
+"de telle fa鏾n que cet espace soit plac contre les partitions 閠endues."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-" correctement restaur閑s en prenant 珷%s牷 comme dossier racine "
+msgid "Channel"
+msgstr "Canal"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr " Toutes vos donn閑s s閘ectionn閑s ont 閠 "
+msgid "Add"
+msgstr "Ajouter"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup files are corrupted"
-msgstr "Les fichiers de sauvegarde sont corrompus"
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Le partage de la connexion internet n'a encore jamais 閠 configur."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Veuillez le d閏ocher ou le retirer la prochaine fois"
+msgid " Error while sending mail. \n"
+msgstr "Erreur lors de l'envoi du courrier.\n"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Clavier"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"Liste des donn閑s corrompues:\n"
-"\n"
+"Ins閞ez le CD %s dans le lecteur correspondant\n"
+"au point de montage /mnt/cdrom"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-"Liste de donn閑s restaurer:\n"
-"\n"
+"Le d閎it doit avoir un suffixe k, M ou G (par ex. \"11M\" pour 11Mo), ou "
+"bien avoir suffisamment de z閞os."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"La configuration de sauvegarde n'est pas encore d閒inie. \n"
-"Veuillez cliquer sur 珷Configuration par assistant牷, ou 珷Configuration "
-"manuelle牷\n"
+msgid "Choose the connection you want to configure"
+msgstr "Choisissez la connexion que vous voulez configurer"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-celle par webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Veuillez patienter, configuration du niveau de s閏urit..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-celle par rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 : la plate-forme de d関eloppement id閍le"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-celle par transfert SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Configuration du p閞iph閞ique r閟eau %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-celle par transfert FTP.\n"
+msgid "activated"
+msgstr "activ閑"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Bande\n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr ""
+"Veuillez choisir la carte r閟eau qui sera utilis閑 pour le serveur DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-celle sur CDR.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Recherche des paquetages mettre jour..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-celle sur Disque dur.\n"
+msgid "Mount point: "
+msgstr "Point de montage: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Le D閙on (%s) comprend:\n"
+msgid "parse all fonts"
+msgstr "Parcourir toutes les polices"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLa sauvegarde utilise 珷tar牷 et 珷gzip牷\n"
+msgid "With X"
+msgstr "Avec X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLe sauvegarde utilise 珷tar牷 et 珷bzip2牷\n"
+msgid "Multi-head configuration"
+msgstr "Configuration multi-閏rans"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tFichiers syst鑝es non inclus\n"
+msgid "No browser available! Please install one"
+msgstr "Pas de navigateur disponible! Veuillez en installer un."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Options:\n"
+"%s"
msgstr ""
+"D閟irez-vous conserver les changements?\n"
+"La configuration actuelle est:\n"
"\n"
-"- Options:\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom de connexion: %s\n"
-"\t\t dans le dossier: %s \n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Les partitions ReiserFS doivent faire au moins 32燤o."
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-"\n"
-"- Sauvegarde via %s sur la machine: %s\n"
+"Le protocole rwho permet aux utilisateurs distants d'obtenir une liste des "
+"utilisateurs connect閟 une machine qui fait tourner le d閙on rwho "
+"(similaire finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tEfface=%s"
+msgid "Domain name"
+msgstr "Nom de domaine"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Sauvegarde sur bande via le p閞iph閞ique: %s"
+msgid "Sharing of local printers"
+msgstr "Partage d'imprimantes locales"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid " (multi-session)"
-msgstr " (multisession)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on device: %s"
-msgstr "sur le p閞iph閞ique: %s"
+msgid "Available printers"
+msgstr "Imprimantes disponibles"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "Vide"
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
-"- Graver le CD"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
"\n"
-"- Efface les fichiers du disque dur apr鑣 sauvegarde.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
"\n"
-"- Sauvegarde sur le disque dur dans le dossier: %s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
"\n"
-"- Other Files:\n"
-msgstr ""
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
"\n"
-"- Autres fichiers ou dossiers:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
"\n"
-"- User Files:\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"X (pour le syst鑝e X Window) est le coeur de votre interface graphique sous\n"
+"GNU/Linux. Tous les environnements graphiques (KDE, GNOME, WindowMaker\n"
+"etc.) pr閟ents sur Mandrake Linux d閜endent de X.\n"
"\n"
-"- Donn閑s des utilisateurs:\n"
+"Il vous sera pr閟ent la liste de divers param鑤res changer pour obtenir\n"
+"un affichage optimal : Carte graphique\n"
+"\n"
+" Le programme d'installation d閠ecte et configure automatiquement les\n"
+"cartes graphiques pr閟entes sur votre machine. Si ce n'est pas le cas, vous\n"
+"pouvez choisir dans cette liste la carte que vous utilisez effectivement.\n"
+"\n"
+" Dans le cas o diff閞ents serveurs seraient disponible pour votre carte,\n"
+"avec ou sans acc閘閞ation 3D, il vous est alors propos de choisir le\n"
+"serveur qui vous conviendra le mieux.\n"
+"\n"
+"\n"
+"\n"
+"Moniteur\n"
+"\n"
+" Le programme d'installation d閠ecte et configure automatiquement les\n"
+"moniteurs connect閟 votre unit centrale. Si ce n'est pas le cas, vous\n"
+"pouvez choisir dans cette liste le moniteur que vous utilisez\n"
+"effectivement.\n"
+"\n"
+"\n"
+"\n"
+"R閟olution\n"
+"\n"
+" Vous pouvez choisir ici la r閟olution et nombre de couleur parmi celles\n"
+"disponibles pour votre mat閞iel. Choisissez la configuration optimale pour\n"
+"votre utilisation (vous pourrez n閍nmoins modifier cela apr鑣\n"
+"l'installation). Un 閏hantillon de la configuration choisie appara顃 dans\n"
+"le moniteur stylis.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" le syst鑝e va ici essayer d'ouvrir un 閏ran graphique la r閟olution\n"
+"choisie. Si vous pouvez voir le message pendant le test, et r閜ondez\n"
+"珷%s牷, alors DrakX passera l'閠ape suivante. Si vous ne pouvez pas voir\n"
+"de message, cela signifie que vos param鑤res sont incompatibles, et le test\n"
+"terminera automatiquement apr鑣 12 secondes. Changez la configuration\n"
+"jusqu' obtenir un affichage correct lors du test.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Vous pourrez finalement choisir ici de d閙arrer l'interface graphique au\n"
+"lancement de la machine. Il est pr閒閞able de choisir 珷%s牷 si vous 阾es\n"
+"en train d'installer un serveur, ou si vous n'avez pas r閡ssi configurer\n"
+"l'閏ran correctement."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "largeur du texte"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "O d閟irez-vous monter la partition %s?"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "D閘ai standard (en secondes)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Interface \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Avec la documentation de base (recommand闋!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 bouton"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
-"- Fichiers syst鑝e:\n"
+"Il y a %d imprimantes inconnues reli閑s votre machine"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Test"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-"Sources de sauvegarde: \n"
+"Permet/interdit la connexion directe en tant que root."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select user manually"
-msgstr "S閘ectionner individuellement les utilisateurs"
+msgid "Korea"
+msgstr "Cor閑"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Backup Users"
-msgstr "Sauvegarder les comptes utilisateurs"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Que choisissez-vous? (珷%s牷 par d閒aut%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup system"
-msgstr "Sauvegarder le syst鑝e"
+msgid "Raw printer"
+msgstr "Imprimante acc鑣 direct"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Veuillez choisir ce que vous voulez sauvegarder"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Le nom officiel du vendeur de ce processeur"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "on Tape Device"
-msgstr "su Lecteur de Bande "
+msgid "Vendor"
+msgstr "Vendeur"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
-msgstr "sur CD-Rom"
+msgid "Interface %s"
+msgstr "Interface %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "across Network"
-msgstr "par r閟eau"
+msgid "Configure mouse"
+msgstr "Configuration de la souris"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr "sur disque dur"
+msgid "Choose the mount points"
+msgstr "Choix des points de montage"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Veuillez choisir o stocker la sauvegarde"
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "More Options"
-msgstr "Plus d'options..."
+msgid "Yugoslavian (latin)"
+msgstr "Yougoslave (latin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "When"
-msgstr "Quand..."
+msgid "Installing"
+msgstr "Installation"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Where"
-msgstr "O..."
+msgid "Launch userdrake"
+msgstr "Lancer Userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What"
-msgstr "Quoi..."
+msgid "Is this an install or an upgrade?"
+msgstr "D閟irez-vous faire une installation ou une mise jour?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Effacer les fichiers tar apr鑣 sauvegarde vers un autre support."
+msgid "ISDN card"
+msgstr "Carte RNIS"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Envoyer un rapport par courriel apr鑣 chaque sauvegarde 酄:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Pour partager vos connaissances et aider la cr閍tion de logiciels Linux, "
+"rejoignez nos forums de discussion sur nos pages 珷community牷."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Veuillez v閞ifier que le d閙on 珷cron牷 fait partie de vos services.\n"
+"F閘icitations, votre choix de configuration internet et r閟eau est "
+"termin閑.\n"
+"La configuration va maintenant 阾re appliqu閑 votre syst鑝e.\n"
"\n"
-"Tenez compte du fait qu'actuellement tous les m閐ias r閟eaux utilisent "
-"間alement le disque dur."
#: ../../standalone/drakbackup:1
#, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-celle sur Disque dur.\n"
+
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Quelle sauvegarde sera p閞iodique?"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
+"Cette 閠ape ne s'affiche que si une partition GNU/Linux a 閠 d閠ect閑 sur\n"
+"votre disque dur.\n"
+"\n"
+"DrakX doit maintenant savoir quel type d'installation vous d閟irez\n"
+"r閍liser. Deux types d'installations sont propos閟 : Par d閒aut (珷%s牷),\n"
+"qui limite le nombre de questions l'utilisateur au minimum ou 珷%s牷 qui\n"
+"vous permet de s閘ectionner individuellement chacune des composantes 郳n"
+"installer. Il vous est 間alement propos de faire une 珷%s牷 ou une 珷%s牷\n"
+"d'un syst鑝e Mandrake Linux d閖 install :\n"
+"\n"
+" * 珷%s牷 : Remplace l'ancien syst鑝e. En fait, selon ce que votre machine\n"
+"comporte, vous pourrez garder intactes certaines des anciennes partitions\n"
+"(Linux ou autres) ;\n"
+"\n"
+" * 珷%s牷 : cette classe d'installation permet de mettre jour seulement\n"
+"les paquetages qui composent votre syst鑝e Mandrake Linux. Elle conserve\n"
+"les partitions existantes, ainsi que la configuration des utilisateurs. La\n"
+"plupart des autres 閠apes d'une installation classique sont accessibles ;\n"
+"\n"
+"La mise jour devrait fonctionner correctement pour les syst鑝e Mandrake\n"
+"Linux partir de la version 珷8.1牷. Essayer de lancer une mise jour sur\n"
+"les versions ant閞ieures 珷8.1牷 n'est pas recommand."
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Imprimante sur serveur CUPS distant"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Veuillez choisir l'intervalle de temps entre les sauvegardes"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "Impossible de retirer l'imprimante 珷%s牷 de StarOffice/OpenOffice"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Use daemon"
-msgstr "Sauvegarde p閞iodique"
+msgid "delete"
+msgstr "supprimer"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "monthly"
-msgstr "tous les mois"
+msgid "here if no."
+msgstr "Ici sinon"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "weekly"
-msgstr "toutes les semaines"
+msgid "DHCP host name"
+msgstr "Nom d'h魌e燚HCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "daily"
-msgstr "tous les jours"
+msgid "The maximum lease (in seconds)"
+msgstr "D閘ai maxi (en secondes)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "hourly"
-msgstr "toutes les heures"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Veuillez choisir le port s閞ie sur lequel votre souris est connect閑."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr "Dans un dossier (local ou partag)..."
+msgid "Did it work properly?"
+msgstr "蕋es-vous satisfait du r閟ultat?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr "CD-Rom / DVD"
+msgid "Poor"
+msgstr "Tr鑣 faible"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Veuillez indiquer le dossier o sauvegarder:"
+msgid "The DHCP start range"
+msgstr "La plage DHCP de d閎ut"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "V閞ifiez que vous voulez 閖ecter la bande apr鑣 sauvegarde."
+msgid "Grenada"
+msgstr "Grenade"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
+msgid "Unsafe"
+msgstr "Peu s鹯"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s secteurs"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Non"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-"蕋es-vous s鹯 de vouloir effacer votre bande magn閠ique avant de faire la "
-"sauvegarde."
+"Votre imprimante est-elle un p閞iph閞ique multifonction de HP ou Sony "
+"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 avec scanner, Sony IJP-"
+"V100), un HP PhotoSmart ou un HP LaserJet 2200?"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "V閞ifiez que vous voulez utiliser un p閞iph閞ique non-rembobinable"
+msgid "Guadeloupe"
+msgstr "Guadeloupe"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "Nom de p閞iph閞ique du mat閞iel de sauvegarde (/dev/...?)"
+msgid "could not find any font.\n"
+msgstr "impossible de trouver des polices.\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Use tape to backup"
-msgstr "Sauvegarde sur cartouche"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Souhaitez-vous que la touche BackSpace retourne Delete en console?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "No CD device defined!"
-msgstr "Pas de p閞iph閞ique CD d閒ini!"
+msgid "Vertical refresh rate"
+msgstr "Fr閝uence verticale"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(d閠ecter avec 珷cdrecord -scanbus牷. Par exemple: 0,1,0 )"
+msgid "Entering step `%s'\n"
+msgstr "D閙arrage de l'閠ape 珷%s牷\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "V閞ifier que vous utilisez bien un DVDRAM"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "V閞ifier que vous utilisez bien un DVDR"
+msgid "Removing %s ..."
+msgstr "Suppression de %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid " Erase Now "
-msgstr "Effacer maintenant"
+msgid "Niger"
+msgstr "Niger"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr ""
-"V閞ifiez si vous voulez effacer votre support r閕nscriptible (1ere session)"
+msgid "No printer"
+msgstr "Pas d'imprimante"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "CD R閕nscriptible"
+msgid "alert configuration"
+msgstr "configuration des alertes"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check for multisession CD"
-msgstr "V閞ifier le CD multisession"
+msgid "NetWare Printer Options"
+msgstr "Options de l'imprimante NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Veuillez choisir la taille de votre CD/DVD"
+msgid "%s BootSplash (%s) preview"
+msgstr "Aper鐄 de l'閏ran de d閙arrage %s (%s)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"SVP choisissez votre lecteur CD/DVD\n"
-"(Appuyer sur Entr閑 pour 閠endre les param鑤res aux\n"
-"autres champs. Ce champ n'est pas indispensable et ne sert que d'info)."
+msgid "General"
+msgstr "G閚閞al"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Sauvegarder sur CDR (ou DVDR)"
+msgid "Printing system: "
+msgstr "Syst鑝e d'impression: "
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-"Le nom d'h魌e, le nom d'utilisateur et le mot de passe dont n閏essaires!"
+msgid "Add a user"
+msgstr "Ajout des utilisateurs"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Remember this password"
-msgstr "Se souvenir du mot de passe"
+msgid "Network configuration (%d adapters)"
+msgstr "Configuration du r閟eau (%d cartes r閟eaux)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Please enter your password"
-msgstr "Veuillez entrer votre mot de passe"
+msgid "Mandatory package %s is missing"
+msgstr "Le paquetage %s, requis, est manquant"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr "Nom de connexion sur cette machine"
+msgid "Philippines"
+msgstr "Philippines"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr "Dossier ou module o poser la sauvegarde sur cette machine"
+msgid "Ok"
+msgstr "Ok"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr "Nom d'h魌e ou adresse IP de la machine de sauvegarde"
+msgid "Print Queue Name"
+msgstr "Nom de la file d'impression"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"D'autres clefs (pas de\n"
-"drakbackup sont d閖 en place"
+msgid "Do you want to use aboot?"
+msgstr "D閟irez-vous utiliser 珷aboot牷?"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bl閘orusse"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" Transfer \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-"Transfert \n"
-"Maintenant"
+"PDQ ne supporte que les imprimantes locales, les imprimantes LPD distantes, "
+"et les imprimantes r閟eau autonomes.\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "D閜lacer les fichiers sur la nouvelle partition"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-"Cr閑r/Transf閞er\n"
-"les cl閟 de sauvegardes pour SSH."
+"Ajoutez ici les serveurs CUPS dont vous voulez utiliser les imprimantes. "
+"Vous n'avez besoin de faire cela que si les serveurs ne diffusent pas les "
+"informations de leurs imprimantes sur le r閟eau local."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr "Utiliser Expect pour SSH"
+msgid "Restore From Catalog"
+msgstr "Restaurer partir d'un catalogue"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Method:"
-msgstr "M閠hode NET:"
+msgid "Pitcairn"
+msgstr "Pitcairn"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use network connection to backup"
-msgstr "Sauvegarder via le r閟eau"
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Users"
-msgstr "Utilisateurs..."
+msgid "group :"
+msgstr "groupe:"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "le montage de la partition %s dans le dossier %s a 閏hou"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Sauvegardes incr閙entales (閏onomie d'espace)"
+msgid "Lilo screen"
+msgstr "蒫ran de LILO"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Remove Selected"
-msgstr "Supprimer s閘ection"
+msgid "LILO with graphical menu"
+msgstr "LILO en mode graphique"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr "Ne pas inclure le cache du navigateur internet (fichiers tampon)"
+msgid "Estimating"
+msgstr "Estimation en cours"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Veuillez cocher tous les comptes utilisateurs sauvegarder"
+msgid "You can't unselect this package. It is already installed"
+msgstr "Vous ne pouvez pas d閟閘ectionner ce paquetage. Il est d閖 install"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", imprimante 珷%s牷 sur serveur SMB/Windows 珷%s牷"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Go on anyway?"
+msgstr "Souhaitez-vous tout de m阭e continuer?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
-"Note: la sauvegarde incr閙entale n'閏rase pas les anciennes sauvegardes."
+"Recherche des paquetages disponibles et reconstruction de la base de donn閑s "
+"rpm..."
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ne pas inclure les fichiers critiques (passwd, group, fstab)"
+msgid "Does not appear to be recordable media!"
+msgstr "Cela ne semble pas 阾re un support enregistrable!"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Sauvegardes incr閙entales (閏onomie d'espace)"
+msgid "Specify options"
+msgstr "Sp閏ifier des options"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sauvegarder vos fichiers syst鑝e (dossier /etc)"
+msgid "Vanuatu"
+msgstr "Vanuatu"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ces options peuvent sauvegarder et restaurer\n"
-"tous les fichiers du dossier de configuration syst鑝e 珷/etc牷\n"
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Il faut au moins pr閏iser le nom du serveur ou son adresse IP."
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Une disquette d'amor鏰ge permet de lancer votre syst鑝e Linux\n"
+"sans utiliser le programme d'amor鏰ge du disque dur.\n"
"\n"
-"Veuillez cocher toutes les options dont vous avez besoin.\n"
+"C'est utile si vous ne voulez pas installer SILO sur votre syst鑝e,\n"
+"si un autre syst鑝e d'exploitation supprime le programme d'amor鏰ge, ou "
+"encore\n"
+"si ce dernier ne peut 阾re install sur votre machine.\n"
+"\n"
+"Vous pouvez 間alement utiliser cette disquette avec l'image de secours "
+"Mandrake.\n"
+"Cela permet une r閏up閞ation plus ais閑 du syst鑝e en cas de probl鑝es "
+"majeurs.\n"
+"\n"
+"Si vous voulez cr閑r une disquette d'amor鏰ge pour votre syst鑝e, ins閞ez \n"
+"une disquette dans le premier lecteur et appuyer sur 珷Ok牷."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "S閘ectionnez les fichiers ou dossiers puis cliquez sur 珷Ajouter牷"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr ""
+"Vous ne pouvez pas utiliser de syst鑝e de fichiers crypt pour le point de "
+"montage %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "File Selection"
-msgstr "S閘ection de fichiers ou dossiers"
+msgid "Norfolk Island"
+msgstr "蝜e Norfolk"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Can't create catalog!"
-msgstr "Ne peut cr閑r le catalogue!"
+msgid "Theme installation failed!"
+msgstr "蒫hec d'installation du th鑝e"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Error while sending mail. \n"
-msgstr "Erreur lors de l'envoi du courrier.\n"
+msgid "Nothing to do"
+msgstr "Rien faire"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"activit閟 de Drakbackup par cartouche:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Utiliser pour le bouclage"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"activit閟 de Drakbackup par CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "Outil de signalement de bogue Mandrake"
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"activit閟 de Drakbackup par %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "utiliser 珷pppoe牷"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "D閜lacement des fichiers sur la nouvelle partition..."
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s avec support EXP蒖IMENTAL de l'acc閘閞ation 3D mat閞ielle"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Avanc"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Transfert"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak su閐ois"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"Probl鑝e de connexion FTP: impossible d'envoyer vos fichiers de sauvegarde "
-"par FTP.\n"
+msgid "More Options"
+msgstr "Plus d'options..."
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "Afghanistan"
#: ../../standalone/drakbackup:1
#, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Effacer les fichiers tar apr鑣 sauvegarde vers un autre support."
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"liste des fichiers envoy閑 par FTP: %s\n"
-" "
+"Cron est un planificateur de t鈉hes. Contrairement Anacron, les t鈉hes "
+"sont ex閏ut閑s des moments pr閏is, pendant lesquels la machine doit 阾re "
+"allum閑. 珷Vixie cron牷 ajoute des fonctions au 珷cron牷 UNIX de base "
+"(notamment une meilleure s閏urit et des options de configuration plus "
+"compl鑤es)."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No changes to backup!"
-msgstr "Pas de changement sauvegarder!"
+msgid "Burundi"
+msgstr "Burundi"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Sauvegarde sur disque dur..."
+msgid "Add Client -->"
+msgstr "Ajouter un client -->"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Backup Other files..."
-msgstr "Sauvegarde des autres fichiers..."
+msgid "Read carefully!"
+msgstr "MISE EN GARDE"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Sauvegarde sur disque dur..."
+msgid "RW"
+msgstr "RW"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Backup User files..."
-msgstr "Sauvegarde des comptes utilisateurs..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"SVP,\n"
+"Veuillez choisir votre r間ion et votre norme de TV"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup system files..."
-msgstr "Sauvegarde des fichiers syst鑝es..."
+msgid "Port"
+msgstr "Port"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No tape in %s!"
-msgstr "Pas de bande dans %s!"
+msgid "No (experts only)"
+msgstr "Non (pour les experts)"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Vous n'avez pas les droits d'acc鑣 au CD."
+msgid "No kernel selected!"
+msgstr "Aucun noyau s閘ectionn闋!"
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Effacer le support peut prendre un moment."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Appuyez sur <Entree> pour demarrer, sur <e> pour modifier la"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Not erasable media!"
-msgstr "Ce n'est pas un support effa鏰ble!"
+msgid "Set-GID"
+msgstr "Set-GID"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Cela ne semble pas 阾re un support enregistrable!"
+msgid "The encryption keys do not match"
+msgstr "Les clefs de chiffrement ne correspondent pas"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Il n'y a pas de CDR/DVDR dans le lecteur!"
+msgid "Right \"Windows\" key"
+msgstr "Touche 珷Windows牷 droite"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
-msgstr "蒫hec du transfert WebDAV!"
+msgid "CDROM / DVDROM"
+msgstr "CD-Rom / DVD"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Le site distant WebDAV est d閖 synchronis闋!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "Si oui, v閞ifie les mots de passe vides dans /etc/shadow."
-#: ../../standalone/drakbackup:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Total progess"
-msgstr "Avancement:"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Avant d'aller plus loin, il est fortement recommand de lire attentivement\n"
+"les termes et conditions d'utilisations de la licence. Celle-ci r間it\n"
+"l'ensemble de la distribution Mandrake Linux. Si vous en acceptez tous les\n"
+"termes, cochez la case 珷%s牷, sinon, 閠eignez simplement votre ordinateur."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"without being prompted for a password."
msgstr ""
-"Transfert r閡ssi.\n"
-"Vous pouvez v閞ifier votre mot de passe sur le serveur avec:\n"
+"Voici la listes des options d'impression disponibles pour l'imprimante "
+"courante:\n"
"\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "R閟olutions"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
"\n"
-"sans qu'il ne soit affich de demande."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"Configuration de drakfirewall\n"
+"\n"
+"Ceci configure un Pare-Feu (firewall) personnel pour votre machine Mandrake "
+"Linux.\n"
+"Si vous souhaitez un Pare-Feu d閐i plus puissant, tournez-vous plut魌 vers\n"
+"la distribution sp閏ialis閑 珷MandrakeSecurity牷."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
-msgstr "%s ne r閜ond pas"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"Veuillez entrer vos nom d'utilisateur, mot de passe et nom de domaine pour "
+"acc閐er ce serveur"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr "Ne peut trouver %s sur %s"
+msgid "Remove selected host"
+msgstr "Supprimer l'h魌e s閘ectionn"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Vous n'avez pas le droit de transf閞er %s vers %s"
+msgid "Network configuration"
+msgstr "Configuration du r閟eau"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr "Mauvais mot de passe sur %s"
+msgid "No sharing"
+msgstr "Pas de partage"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Pas de demande de mot de passe sur %s l'entr閑 %s"
+msgid "Move selected rule down one level"
+msgstr "Abaisser la priori閠 de la r鑗le d'un niveau"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "ERREUR: Impossible de lancer %s."
+msgid "TB"
+msgstr "To"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "G閚閞er les clefs peut prendre un moment."
+msgid "Please check if you are using a DVDR device"
+msgstr "V閞ifier que vous utilisez bien un DVDR"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existe, l'effacer? \n"
-"\n"
-"Attention: si vous avez d閖 fait ce processus, vous devrez\n"
-"probablement purger l'entr閑 des cl閟 autoris閑s sur le serveur."
+msgid "FATAL"
+msgstr "FATALE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
+"Le serveur DHCP permettra aux autres ordinateurs de s'amorcer en utilisant "
+"le PXE dans la plage d'adresses donn閑.\n"
"\n"
-" D閠ails du rapport de sauvegarde\n"
-"\n"
+"L'adresse r閟eau est %s, avec le masque %s.\n"
"\n"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Supprimer"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
+"Arguments: (arg)\n"
"\n"
-" Rapport de sauvegarde p閞iodique (DrakBackup)\n"
-"\n"
-"\n"
+"Active/D閟active le red閙arrage du syst鑝e par l'utilisateur de la console."
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
-"\n"
-" Rapport de sauvegarde (DrakBackup) \n"
-"\n"
+"Souhaitez-vous que l'interface graphique soit\n"
+"automatiquement lanc閑 lors du d閙arrage?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Cr閑r la disquette"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr "FATALE"
+msgid "Disconnect %s"
+msgstr "D閏onnecter %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
-msgstr "ATTENTION"
+msgid "Status:"
+msgstr "蓆at:"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron n'est pas encore disponible en dehors de root."
+msgid "HTTP proxy"
+msgstr "Serveur mandataire HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "L'installation de %s a 閏hou pour la raison suivante:"
+msgid "SSH Server"
+msgstr "Serveur SSH"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Ne pas connecter automatiquement un utilisateur"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-celle par rsync.\n"
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Connexion automatique (choisir utilisateur et environnement)"
+msgid "European protocol"
+msgstr "Protocole pour l'Europe"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Lancer l'interface graphique au d閙arrage"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", imprimante 珷%s牷 sur serveur 珷%s牷"
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "System mode"
-msgstr "Choix pour l'interface utilisateur"
+msgid "Error"
+msgstr "Erreur"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Bootsplash"
-msgstr "Image pendant l'amor鏰ge"
+msgid "allow \"su\""
+msgstr "autoriser 珷su牷"
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Lilo screen"
-msgstr "蒫ran de LILO"
+msgid "Australia"
+msgstr "Australie"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"S閘ectionnez un th鑝e pour LILO\n"
-"et l'image pendant l'amor鏰ge,\n"
-"vous pouvez les choisir \n"
-"s閜ar閙ent"
+msgid "please wait during ttmkfdir..."
+msgstr "Veuillez patienter pendant 珷ttmkfdir牷"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Themes"
-msgstr "Th鑝es"
+msgid "Configure only card \"%s\"%s"
+msgstr "Configurer seulement la carte 珷%s牷 %s"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Splash selection"
-msgstr "S閘ection de l'image"
+msgid "Level"
+msgstr "Niveau"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Le choix du syst鑝e d'exploitation est actuellement g閞 par %s.\n"
-"Vous pouvez ici modifier la liste du menu d'amor鏰ge."
+msgid "Change the printing system"
+msgstr "Changer le syst鑝e d'impression"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "Installation r閡ssie des th鑝es pour l'image d'amor鏰ge et pour LILO."
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Votre syst鑝e peut utiliser simultan閙ent plusieurs 閏rans.\n"
+"Que souhaitez-vous faire?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "蒫hec d'installation du th鑝e"
+msgid "Configure services"
+msgstr "Configuration des services"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "Mode d'emploi"
+msgid "Broadcast Address:"
+msgstr "Adresse de diffusion (broadcast):"
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Relancez 珷lilo牷"
+msgid "mount failed: "
+msgstr "Le montage a 閏hou闋: "
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"Impossible de relancer LILO!\n"
-"Lancez 珷lilo牷 dans une ligne de commande en 閠ant root pour terminer "
-"l'installation du th鑝e de LILO."
+"Le noyau Linux doit ex閏uter une boucle de calcul au d閙arrage pour "
+"initialiser un compteur d'horloge. Le r閟ultat est donn sous la forme de "
+"bogomips et donne une indication sur les performances du processeur."
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "construisez le RAMdisk avec 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Image"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Impossible de lancer mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "Impossible d'ajouter l'imprimante 珷%s牷 StarOffice/OpenOffice"
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Administration distance"
+
+#: ../../modules.pm:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-"Impossible d'閏rire dans /etc/sysconfig/bootsplash\n"
-"Fichier non trouv"
+"Le support du PCMCIA n'est plus disponible avec les noyaux 2.2. Veuillez "
+"utiliser un noyau 2.4."
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Write %s"
-msgstr "蒫riture de %s"
+msgid "Selected All"
+msgstr "S閘ectionne tout"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Impossible d'閏rire dans /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Lilo message not found"
-msgstr "Message de LILO non trouv"
+msgid "Webmin Service"
+msgstr "Service Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "Copie de %s vers %s"
+msgid "device"
+msgstr "p閞iph閞ique"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "Sauvegarde de %s vers %s.old"
+msgid "All"
+msgstr "Tout"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create new theme"
-msgstr "Cr閑r un nouveau th鑝e"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Quel syst鑝e d'impression d閟irez-vous utiliser?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Affiche le th鑝e\n"
-"dans la console"
+msgid "Greece"
+msgstr "Gr鑓e"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install themes"
-msgstr "Installation de th鑝es"
+msgid "An error occurred"
+msgstr "Une erreur est survenue"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "Menu d'amor鏰ge"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Ce paquetage doit 阾re mis jour.\n"
+"蕋es-vous certain de vouloir le d閟閘ectionner?"
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "Menu d'amor鏰ge"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Tamoul (fa鏾n machine 閏rire)"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "manuel"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Fichier/_Quitter"
+msgid "Printer manufacturer, model, driver"
+msgstr "Marque, mod鑜e, pilote"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "/_File"
-msgstr "/_Fichier"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Il n'y a aucune disquette dans le lecteur %s ou alors elle est \n"
+"prot間閑 contre l'閏riture. Veuillez v閞ifier ou en ins閞er une."
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configuration du style de d閙arrage"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Le dossier %s contient d閖 des donn閑s\n"
+"(%s)"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "No browser available! Please install one"
-msgstr "Pas de navigateur disponible! Veuillez en installer un."
+msgid "Printer on NetWare server"
+msgstr "Imprimante sur serveur NetWare"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "Connexion l'assistant Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "Indiquez la quantit de m閙oire en Mo"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr "Paquetage non install"
+msgid "Real name"
+msgstr "Nom et pr閚om"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Not installed"
-msgstr "Non install"
+msgid "done"
+msgstr "termin"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
-msgstr "Outils autonomes"
+msgid "Please uncheck or remove it on next time."
+msgstr "Veuillez le d閏ocher ou le retirer la prochaine fois"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
-msgstr "Signaler"
+msgid "Higher"
+msgstr "Plus 閘ev閑"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "S閘ectionnez les partitions que vous souhaitez formater"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
+"Aucune carte TV n'a 閠 d閠ect閑 sur votre ordinateur. Veuillez v閞ifier "
+"qu'une carte TV/Vid閛 support閑 par Linux est correctement branch閑.\n"
"\n"
"\n"
-"Pour soumettre un rapport de bogue, cliquez sur le bouton Signaler.\n"
-"Cela ouvrira une fen阾re de navigateur sur https://drakbug.mandrakesoft.com\n"
-"o vous trouverez un formulaire remplir.\n"
-" L'information affich閑 ci-dessus sera transf閞閑 vers ce serveur\n"
+"Vous pouvez visiter notre base de donn閑s de support mat閞iel 酄:\n"
+"\n"
"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
-msgstr "Version: "
+msgid "Can't find %s on %s"
+msgstr "Ne peut trouver %s sur %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr "Noyau:"
+msgid "Japanese 106 keys"
+msgstr "Japonais 106 touches"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr "Paquetage: "
+msgid "This will take a few minutes."
+msgstr "Cela va prendre quelques minutes."
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr "Application:"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr "Assistants de configuration"
+msgid "Use scanners on remote computers"
+msgstr "Utiliser des scanners sur des ordinateurs distants"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Supprimer la r鑗le"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr "Outil de migration windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Acc鑣 aux imprimantes sur serveurs CUPS distant..."
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "Ins閞ez une disquette dans le %s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr "Gestionnaire de programmes"
+msgid "Maldives"
+msgstr "Maldives"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr "Contr鬺e distance"
+msgid "compact"
+msgstr "compact"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "1 minute"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "sur canal %d id %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", p閞iph閞ique multifonction"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Laos"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr "Outil de synchronisation"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Il n'y a aucune partition FAT redimensionner (ou trop peu d'espace est "
+"disponible)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr "Assistant de premi鑢e connexion"
+msgid "Up"
+msgstr "monter"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr ""
-"Mandrake Linux 9.1 int鑗re un puissant logiciel de configuration centralis"
+msgid "Firewall"
+msgstr "Pare Feu"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "Outil de signalement de bogue Mandrake"
+msgid "Area:"
+msgstr "Zone:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
-msgstr "Param鑤res"
+msgid "(E)IDE/ATA controllers"
+msgstr "Contr鬺eurs (E)IDE/ATA"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configuration de la connexion internet"
+msgid "Printer Server"
+msgstr "Nom du serveur d'impression"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr "Client DHCP"
+msgid "Disconnection from the Internet complete."
+msgstr "D閏onnexion d'Internet effectu閑."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Carte ethernet"
+msgid "Custom configuration"
+msgstr "configuration personnalis閑"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
-msgstr "Passerelle"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"Veuillez indiquer o les images d'installation seront disponibles.\n"
+"\n"
+"Si vous n'avez pas de dossier existant, veuillez copier le contenu du CD ou "
+"du DVD.\n"
+"\n"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
-msgstr "Type de connexion: "
+msgid "Saint Pierre and Miquelon"
+msgstr "Saint-Pierre-et-Miquelon"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Probl鑝es de restauration:\n"
+"\n"
+"Avant l'閠ape de restauration, Drakbackup va v閞ifier tous vos\n"
+"fichiers de sauvegarde. Les dossiers originaux seront effac閟\n"
+"et vous allez perdre toutes vos donn閑s. Il est important de \n"
+"faire les choses avec pr閏aution et de ne pas modifier la main\n"
+"les fichiers de sauvegarde.\n"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Configuration de la connexion internet"
+msgid "saving Bootsplash theme..."
+msgstr "sauvegarde du th鑝e de d閙arrage..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune connexion internet.\n"
-"Vous pouvez en cr閑r une en cliquant sur 珷Configurer牷"
+msgid "Portugal"
+msgstr "Portugal"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Cette interface n'a pas encore 閠 configur閑.\n"
-"Lancez l'assistant de configuration dans la fen阾re principale"
+msgid "Do you have another one?"
+msgstr "En poss閐ez-vous d'autres?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr "activer maintenant"
+msgid ", printing to %s"
+msgstr ", impression sur %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
-msgstr "d閟activer maintenant"
+msgid "Assign host name from DHCP address"
+msgstr "Affecter le nom d'h魌e partir de l'adresse DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr "Client DHCP"
+msgid "Toggle to normal mode"
+msgstr "Passer en mode normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Lancer au d閙arrage"
+msgid "Generic"
+msgstr "G閚閞ique"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocole d'amor鏰ge"
+msgid "Cylinder %d to %d\n"
+msgstr "Cylindre %d %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Carte r閟eau %s: %s"
+msgid "New profile..."
+msgstr "Nouveau profil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Configuration du LAN (r閟eau local)"
+msgid "Which disk do you want to move it to?"
+msgstr "Sur quel disque souhaitez-vous la d閜lacer?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr "Configuration LAN (r閟eau local)"
+msgid "Display logo on Console"
+msgstr "Affiche le logo dans la console"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune interface r閟eau configur閑.\n"
-"Vous pouvez en configurer une en cliquant sur 珷Configurer牷"
+msgid "Windows Domain"
+msgstr "Domaine Windows"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr "Se connecter..."
+msgid "Interface %s (on network %s)"
+msgstr "Interface %s (sur le r閟eau %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
-msgstr "Se d閏onnecter..."
+msgid "INFO"
+msgstr "INFO"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
-msgstr "Non connect"
+msgid "Wallis and Futuna"
+msgstr "Wallis et Futuna, 頻es"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
-msgstr "Connect"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Il faut d'abord cr閑r /etc/dhcpd.conf!"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr "Coprocesseur arithm閠ique pr閟ent"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Aucun scanner trouv disponible sur votre syst鑝e.\n"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attention, une autre connexion internet a 閠 d閠ect閑, peut-阾re utilisant "
-"votre r閟eau"
+"No additional information\n"
+"about this service, sorry."
+msgstr "Pas d'autre information au sujet de ce service, d閟ol."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Interface:"
-msgstr "Interface:"
+msgid "Build Single NIC -->"
+msgstr "Construire un NIC unique -->"
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Passerelle:"
+msgid "Is this correct?"
+msgstr "Est-ce correct?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Apply"
-msgstr "Appliquer"
+msgid "Marshall Islands"
+msgstr "蝜es Marshall"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Cliquez ici pour lancer l'assistant ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Assistant..."
+msgid "Root password"
+msgstr "Mot de passe root"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "蓆at:"
+msgid "Build All Kernels -->"
+msgstr "Construire tous les noyaux -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Type:"
-msgstr "Type:"
+msgid "if set to yes, report unowned files."
+msgstr "Si oui, cherche des fichiers sans propri閠aire."
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Acc鑣 internet"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Vous n'avez pas de partition d'閏hange (swap).\n"
+"\n"
+"D閟irez-vous tout de m阭e continuer?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hostname: "
-msgstr "Nom de machine: "
+msgid "Server IP missing!"
+msgstr "Adresse IP du serveur manquante!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configurer le r閟eau local..."
+msgid "Suriname"
+msgstr "Suriname"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "State"
-msgstr "蓆at"
+msgid "Enable ACPI"
+msgstr "Activer l'ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Pilote"
+msgid "Graphical Environment"
+msgstr "Environnement graphique"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protocole"
+msgid "Gibraltar"
+msgstr "Gibraltar"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Interface"
-msgstr "Interface"
+msgid "on Tape Device"
+msgstr "su Lecteur de Bande "
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr "Configurer l'acc鑣 Internet..."
+msgid "Do nothing"
+msgstr "Ne rien faire"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Wait please"
-msgstr "Veuillez patienter"
+msgid "Delete Client"
+msgstr "Effacer un client"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nom du profil cr閑r (le nouveau profil est cr殚 comme une copie du profil "
-"courant:"
+msgid "Filesystem type: "
+msgstr "Type du syst鑝e de fichiers: "
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New profile..."
-msgstr "Nouveau profil..."
+msgid "Starting network..."
+msgstr "D閙arrage du r閟eau..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr "Profil effacer:"
+msgid "Vietnam"
+msgstr "Vietnam"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Del profile..."
-msgstr "Effacer le profil..."
+msgid "/_Fields description"
+msgstr "/_Description des champs"
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuration du r閟eau (%d cartes r閟eaux)"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Optimisez votre s閏urit en utilisant Mandrake Linux"
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Le gestionnaire de connexion vous permet d'ouvrir une session graphique\n"
-"sur votre syst鑝e gr鈉e au serveur d'affichage XFree, et permet le "
-"fonctionnement\n"
-"de plusieurs sessions XFree en m阭e temps sur la m阭e machine."
+msgid "Help"
+msgstr "Aide"
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Choosing a display manager"
-msgstr "Choix d'un gestionnaire de connexion"
+msgid "Your personal phone number"
+msgstr "Votre num閞o de t閘閜hone personnel"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Quelle taille d閟irez-vous allouer Windows sur la"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-"Ne peut terminer correctement mkbootdisk: \n"
-" %s \n"
-" %s"
+"Les pages de test ont 閠 envoy閑s l'imprimante.\n"
+"Il peut se passer un certain temps avant le d閎ut effectif de l'impression.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne peut d閐oubler (fork): %s"
+msgid "Username required"
+msgstr "Nom d'utilisateur n閏essaire"
-#: ../../standalone/drakfloppy:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-"Il n'y a aucune disquette dans le lecteur %s ou alors elle est \n"
-"prot間閑 contre l'閏riture. Veuillez v閞ifier ou en ins閞er une."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Assurez-vous qu'un m閐ium est pr閟ent dans le p閞iph閞ique %s"
+"Selon la langue principale que vous avez choisie l'閠ape , DrakX\n"
+"s閘ectionne le clavier appropri. Cela dit, il est possible que vous ayez\n"
+"un clavier ne correspondant pas exactement votre langue d'utilisation.\n"
+"Par exemple, si vous habitez le Qu閎ec et parlez le fran鏰is et l'anglais,\n"
+"vous pouvez vouloir avoir votre clavier anglais pour les t鈉hes\n"
+"d'administration syst鑝e et votre clavier fran鏰is pour 閏rire de la\n"
+"po閟ie. Dans ces cas, il vous faudra revenir cette 閠ape d'installation\n"
+"et s閘ectionner un autre clavier partir de la liste.\n"
+"\n"
+"Cliquez sur 珷%s牷 pour voir toutes les options propos閑s.\n"
+"\n"
+"Si vous choisissez un clavier bas sur un alphabet non-latin, on vous\n"
+"demandera au prochain 閏ran de choisir la combinaison de cl閟 permettant\n"
+"d'alterner entre ceux-ci."
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Cr閑r la disquette"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Configuration d'une imprimante SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Sortie"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Accepte/refuse les messages d'erreur IPv4 bogu閟."
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Retirer un module"
+msgid "mkinitrd optional arguments"
+msgstr "arguments optionnels pour mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Ajouter un module"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+"Consultez des sites Web avec Mozilla ou Konqueror. Lisez votre courrier avec "
+"Evolution ou Kmail. Cr閑z vos documents avec OpenOffice.org."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "omit scsi modules"
-msgstr "ne pas tenir compte des modules SCSI"
+msgid "Protocol for the rest of the world"
+msgstr "Protocole pour le reste du monde"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if needed"
-msgstr "si besoin est"
+msgid "Print test pages"
+msgstr "Imprimer des pages de test"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "ne pas tenir compte des modules RAID"
+msgid "64 MB or more"
+msgstr "64 Mo ou plus"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "forcer"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Merci de s閘ectionner les pages de test que vous voulez imprimer.\n"
+"Note: la page de test photo peut prendre un temps assez long pour "
+"s'imprimer, et sur les imprimantes laser avec trop peu de m閙oire, elle peut "
+"m阭e ne pas sortir.\n"
+"Dans la plupart des cas, l'impression de la page de test standard suffit."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "arguments optionnels pour mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr "Veuillez s閘ectionner le p閞iph閞ique sur lequel %s est branch"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Mode Expert"
+msgid "Not formatted\n"
+msgstr "Non format閑\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "version du noyau"
+msgid "Periodic Checks"
+msgstr "V閞ifications p閞iodiques"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "default"
-msgstr "par d閒aut"
+msgid "PXE Server Configuration"
+msgstr "Configuration du serveur PXE"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "General"
-msgstr "G閚閞al"
+msgid "Backup the system files before:"
+msgstr "Sauvegarder les fichiers syst鑝e avant:"
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "cr閍tion d'une disquette d'amor鏰ge"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Ceci est le niveau de s閏urit standard recommand pour un ordinateur \n"
+"utilis pour se connecter Internet en tant que client."
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "First floppy drive"
+msgstr "Premier lecteur de disquette"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "Taille"
+msgid "/File/_Quit"
+msgstr "/Fichier/_Quitter"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
-msgstr "Nom du module"
+msgid "Dvorak"
+msgstr "Dvorak standard"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr "Post-d閟installation"
+msgid "Choose the new size"
+msgstr "Choisissez la nouvelle taille"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr "Retirer des polices de votre syst鑝e"
+msgid "Media class"
+msgstr "Classe de mat閞iel"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr "Tests initiaux"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "%s n'est pas support par cette version de Scannerdrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
-msgstr "Post-installation"
+msgid "Faroe Islands"
+msgstr "蝜es Faroe"
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
-msgstr "Installe et convertit des polices"
+msgid "Restart XFS"
+msgstr "Relancer le serveur de polices"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copier les polices sur votre syst鑝e"
+msgid "Add host/network"
+msgstr "Ajouter un h魌e/r閟eau"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
-msgstr "D閟installe la liste"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"Si oui, v閞ifie les mots de passe vides, les mots de passes absents de /etc/"
+"shadow, et les utilisateurs autres que root ayant le num閞o d'\"id\" 間al "
+"0."
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
-msgstr "S閘ectionne tout"
+msgid "Please enter the directory to save to:"
+msgstr "Veuillez indiquer le dossier o sauvegarder:"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr "D閟閘ectionne tout"
+msgid "Model name"
+msgstr "Nom du mod鑜e"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr "Ici sinon"
+msgid "Albania"
+msgstr "Albanie"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
-msgstr "Cliquez ici si vous 阾es s鹯"
+msgid "No CDR/DVDR in drive!"
+msgstr "Il n'y a pas de CDR/DVDR dans le lecteur!"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
-msgstr "Installe la liste"
+msgid "British Indian Ocean Territory"
+msgstr "Territoire Britannique de l'oc閍n Indien"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "S閘ectionnez les polices ou dossiers et cliquez sur 珷Ajouter牷"
+msgid "Normal Mode"
+msgstr "Mode normal"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"Avant d'installer des polices de caract鑢es, assurez-vous que vous avez\n"
-"les permissions de les utiliser et de les installer sur votre syst鑝e. \n"
+"Veuillez v閞ifier que le d閙on 珷cron牷 fait partie de vos services.\n"
"\n"
-"- Vous pouvez installer les polices par la voie habituelle. Dans de rares "
-"cas,\n"
-"des polices bogu閑s peuvent bloquer votre serveur d'affichage XFree."
+"Tenez compte du fait qu'actuellement tous les m閐ias r閟eaux utilisent "
+"間alement le disque dur."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr "Imprimantes g閚閞iques"
+msgid "Printer connection type"
+msgstr "Type de connexion"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Aucune carte r閟eau n'est pr閟ente dans votre syst鑝e"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "R閟eau %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Malayalam"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Choisissez les applications qui supporteront ces polices"
+msgid "Option %s out of range!"
+msgstr "L'option %s est en dehors des limites!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-" Copyright (C) 2001-2002 par MandrakeSoft \n"
-"\tDUPONT S閎astien (version originale)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-"Ce programme est un logiciel libre: vous pouvez le redistribuer\n"
-"et/ou le modifier selon les termes de la 珷GNU General Public\n"
-"License牷, tels que publi閟 par la 珷Free Software Foundation牷; soit\n"
-"la version 2 de cette licence ou ( votre choix) toute version\n"
-"ult閞ieure.\n"
-"\n"
-"Ce programme est distribu dans l'espoir qu'il sera utile, mais\n"
-"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans m阭e les\n"
-"garanties de commercialisation ou d'adaptation dans un but sp閏ifique.\n"
-"Se r閒閞er la 珷GNU General Public License牷 pour plus de d閠ails.\n"
-"\n"
-"Vous devriez avoir re鐄 une copie de la 珷GNU General Public License牷\n"
-"en m阭e temps que ce programme; sinon, 閏rivez la 珷Free Software\n"
-"Foundation牷, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, "
-"USA. \n"
-" Remerciements:\n"
-" - pfm2afm: \n"
-"\t par Ken Borgendale:\n"
-"\t Conversion d'un fichier .pfm Windows vers un .afm (Adobe Font "
-"Metrics)\n"
-" - type1inst:\n"
-"\t par James Macnicol: \n"
-"\t type1inst g閚鑢e les fichiers fonts.dir, fonts.scale et Fontmap.\n"
-" - ttf2pt1: \n"
-"\t par Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Conversion des fichiers ttf vers afm et pfb\n"
-"\n"
-"\n"
+msgid "Connect %s"
+msgstr "Connecter %s"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr " propos"
+msgid "Restarting CUPS..."
+msgstr "Red閙arrage de CUPS..."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Font List"
-msgstr "Liste des polices"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Impression/Acquisition/Cartes photo sur 珷%s牷"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Advanced Options"
-msgstr "Options avanc閑s"
+msgid "Duplicate mount point %s"
+msgstr "Point de montage en double: %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr "D閟installer des polices"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
+"Si oui, effectue des v閞ifications par chkrootkit (recherche de rootkits)"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr "R閏up閞er les polices de Windows"
+msgid "Connection Configuration"
+msgstr "Configuration de la connexion"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Import Fonts"
-msgstr "Importation de polices"
+msgid "Unknown|Generic"
+msgstr "Inconnu|G閚閞ique"
-#: ../../standalone/drakfont:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "done"
-msgstr "termin"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"Au moment o vous 阾es en train d'installer Mandrake Linux, il est possible\n"
+"que certains paquetages aient 閠 mis jour depuis la sortie du produit.\n"
+"Des bogues ont pu 阾re corrig閟, et des probl鑝es de s閏urit r閟olus. Pour\n"
+"vous permettre de b閚閒icier de ces mises jour, il vous est maintenant\n"
+"propos de les t閘閏harger depuis Internet. Choisissez 珷%s牷 si vous avez\n"
+"une connexion Internet, ou 珷%s牷 si vous pr閒閞ez installer les mises 郳n"
+"jour plus tard.\n"
+"\n"
+"En choisissant 珷%s牷, la liste des sites depuis lesquels les mises jour\n"
+"peuvent 阾re t閘閏harg閑s est affich閑. Choisissez le site le plus proche.\n"
+"Puis un arbre de choix des paquetages appara顃 : v閞ifiez la s閘ection,\n"
+"puis cliquez sur 珷%s牷 pour t閘-charger et installer les mises jour\n"
+"s閘ectionn閑s, ou 珷%s牷 pour abandonner."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "xfs restart"
-msgstr "red閙arrage du serveur de fonte"
+msgid "Quit"
+msgstr "Quitter"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Supprimer les fichiers de polices"
+msgid "Myanmar"
+msgstr "Birmanie"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr "Relancer le serveur de polices"
+msgid "Auto allocate"
+msgstr "Partitionnement automatique"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Supprimer les fichiers temporaires"
+msgid "Check bad blocks?"
+msgstr "V閞ifier la pr閟ence de secteurs endommag閟?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "type1inst building"
-msgstr "construction par type1inst"
+msgid "Other MultiMedia devices"
+msgstr "Autre p閞iph閞iques multim閐ia"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr "Conversion de polices 珷pfm牷"
+msgid "No remote machines"
+msgstr "Pas de machine distante"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
-msgstr "Conversion de polices 珷True Type牷"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"Bienvenue dans l'assistant de configuration d'imprimante\n"
+"\n"
+"Cet assistant vous aidera installer les imprimantes connect閑s cet "
+"ordinateur.\n"
+"\n"
+"Si vous avez des imprimantes branch閑s sur cet ordinateur, veuillez les "
+"allumer afin qu'elles soient d閠ect閑s automatiquement.\n"
+"\n"
+"Cliquez sur 珷suivant牷 quand vous 阾es pr阾, ou sur 珷annuler牷 si vous ne "
+"voulez pas configurer d'imprimante maintenant."
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr "Inscription dans ghostscript"
+msgid "Authentication NIS"
+msgstr "Authentification NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Fonts conversion"
-msgstr "Conversion de polices"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr ""
+"L'option ``Restrict command line options'' est inutile sans mot de passe"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "True Type install done"
-msgstr "Installation 珷True Type牷 termin閑"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Le partage de la connexion internet est activ"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Veuillez patienter pendant 珷ttmkfdir牷"
+msgid "Card IO_0"
+msgstr "E/S_O de la carte"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation de polices 珷True Type牷"
+msgid "United Arab Emirates"
+msgstr "蒻irats Arabes Unis"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Fonts copy"
-msgstr "Copie des fontes"
+msgid "Card IO_1"
+msgstr "E/S_1 de la carte"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Chercher des polices dans la liste des install閑s"
+msgid "Thailand"
+msgstr "Tha飈ande"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
-msgstr "impossible de trouver des polices.\n"
+msgid "Routers:"
+msgstr "Routeurs:"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr "Res閘ectionnez des polices correctes"
+msgid "Kazakhstan"
+msgstr "Kazakhstan"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "impossible de trouver des polices dans vos disques"
+msgid "Display all available remote CUPS printers"
+msgstr "Afficher toutes les imprimantes CUPS distantes"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "no fonts found"
-msgstr "aucune fonte trouv閑"
+msgid "Mandrake Linux Installation %s"
+msgstr "Installation de Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr "Parcourir toutes les polices"
+msgid "Thai keyboard"
+msgstr "Tha飈andais"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
-msgstr "D閟閘ectionner les polices install閑s"
+msgid "Dialup options"
+msgstr "Options d'appel"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search installed fonts"
-msgstr "Chercher les polices install閑s"
+msgid "Bouvet Island"
+msgstr "蝜e Bouvet"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "If no port is given, 631 will be taken as default."
+msgstr "631 sera le port utilis par d閒aut"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-"Bienvenue dans l'utilitaire de partage de connexion internet!\n"
+"--Changement de CD-Rom--\n"
"\n"
-"%s\n"
+"Veuillez ins閞er le CD-Rom nomm 珷%s牷,\n"
+"puis cliquez sur 珷OK牷.\n"
"\n"
-"Cliquez sur Configurer pour lancer l'assistant de configuration."
+"Si vous ne le poss閐ez pas, cliquez sur 珷Annuler牷 afin de ne rien "
+"installer partir de ce Cd-Rom."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Configuration du partage de la connexion internet"
+msgid "Polish"
+msgstr "Polonais"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Le partage de la connexion internet n'a encore jamais 閠 configur."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La configuration a d閖 閠 effectu閑, et elle est actuellement activ閑."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-celle par webdav.\n"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
-"La configuration a d閖 閠 effectu閑, mais elle est actuellement d閟activ閑."
+"Aucune carte r閟eau n'a 閠 d閠ect閑 sur votre syst鑝e. Veuillez utiliser "
+"l'outil de configuration du mat閞iel."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tout a 閠 configur.\n"
-"Vous pouvez maintenant partager votre connexion internet avec d'autres "
-"ordinateurs sur votre r閟eau local, en utilisant la configuration r閟eau "
-"automatique (DHCP)."
+msgid "Netmask"
+msgstr "Masque de sous-r閟eau"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Des probl鑝es sont apparus en installant le paquetage %s"
+msgid "No hard drives found"
+msgstr "Aucun disque dur trouv"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configuration des scripts, installation des logiciels, d閙arrage des "
-"serveurs..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Configuration en cours..."
+msgid "2 buttons"
+msgstr "2 boutons"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Conflit potentiel d'adresses du r閟eau local trouv dans la configuration de "
-"%s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Quel est le type de votre connexion RNIS/ISDN?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Le r閟eau local ne finissait pas par `.0', j'abandonne."
+msgid "Label"
+msgstr "Label"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Reconfigurer l'interface et le serveur DHCP"
+msgid "Save on floppy"
+msgstr "Sauvegarder sur disquette..."
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "D閘ai maxi (en secondes)"
+msgid "Printer auto-detection"
+msgstr "d閠ection automatique d'imprimantes"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
-msgstr "D閘ai standard (en secondes)"
+msgid "Which of the following is your ISDN card?"
+msgstr "Parmis les choix suivants, lequel correspond votre carte RNIS/ISDN?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
-msgstr "La plage DHCP de fin"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"D閙arrage ou arr阾 du serveur NFS. Un serveur NFS permet d'effectuer un "
+"partage de fichiers en ouvrant l'acc鑣 certains dossiers depuis un r閟eau. "
+"Les dossiers partag閟 sont list閟 dans le fichier /etc/exports, mais vous "
+"pouvez l'閐iter gr鈉e 珷linuxconf牷 dans la section 珷r閟eau / serveur牷."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
-msgstr "La plage DHCP de d閎ut"
+msgid "Msec"
+msgstr "Msec"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
-msgstr "Le nom de domaine international"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Notez qu'un message a chang闋:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr "L'adresse IP du serveur DNS"
+msgid "Number of capture buffers:"
+msgstr "Nombre de tampons de capture"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Adresse IP du serveur DHCP"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Votre choix? (0/1, d閒aut 珷%s牷)"
-#: ../../standalone/drakgw:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-msgstr ""
-"Configuration du serveur DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
"\n"
-"Vous pouvez ici s閘ectionner diff閞entes options pour le serveur DHCP.\n"
-"Si vous ne connaissez pas leur signification, laissez-les telles quelles.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresse de R閟eau Local"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-"Je peux conserver votre configuration actuelle, et supposer que vous avez "
-"d閖 configur un serveur DHCP; dans ce cas veuillez v閞ifier que j'ai "
-"correctement lu l'adresse du r閟eau de Classe C que vous utilisez pour votre "
-"r閟eau local; je ne le reconfigurerai pas et je ne toucherai pas la "
-"configuration de votre serveur DHCP.\n"
+"Les partitions ayant 閠 nouvellement d閒inies doivent 阾re format閑s (ce\n"
+"qui implique la cr閍tion d'un syst鑝e de fichiers).\n"
"\n"
-"L'entr閑 DNS par d閒aut est le serveur cache de nom configur pour le pare-"
-"feu. Vous pouvez par exemple la remplacer par l'adresse IP du serveur DNS de "
-"votre fournisseur d'acc鑣.\n"
-"\t\t \n"
-"Sinon, je peux reconfigurer votre interface et (re)configurer un serveur "
-"DHCP votre place.\n"
+"Lors de cette 閠ape, vous pouvez reformater des partitions existantes pour\n"
+"effacer les donn閑s pr閟entes. Vous devrez alors les s閘ectionner\n"
+"間alement.\n"
"\n"
+"Sachez qu'il n'est pas n閏essaire de reformater toutes les partitions\n"
+"existantes. Vous devez formater les partitions contenant le syst鑝e\n"
+"d'exploitation (comme 珷/牷, 珷/usr牷 ou 珷/var牷, mais il n'est pas\n"
+"n閏essaire de formater les partitions de donn閑s, notamment 珷/home牷...\n"
+"\n"
+"Soyez prudent. Une fois que les partitions s閘ectionn閑s seront\n"
+"reformat閑s, il sera impossible de r閏up閞er des donn閑s.\n"
+"\n"
+"Cliquez sur 珷%s牷 lorsque vous 阾es pr阾 formater les partitions.\n"
+"\n"
+"Cliquez sur 珷%s牷 pour ajouter ou enlever une partition formater.\n"
+"\n"
+"Cliquer sur 珷%s牷 si vous d閟irez s閘ectionner des partitions pour une\n"
+"v閞ification des secteurs d閒ectueux (珷Bad Blocks牷)."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Fran鏰is"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tch鑡ue (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "D閠ection du mat閞iel en cours"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "P閞iph閞ique r閟eau"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "R閟um"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"Configuration actuelle de 珷%s牷:\n"
-"\n"
-"R閟eau: %s\n"
-"Adresse IP: %s\n"
-"Attribution de l'adresse: %s\n"
-"Pilote: %s"
+"(Ports parall鑜es: /dev/lp0, /dev/lp1, ..., 閝uivalents LPT1:, "
+"LPT2:, ..., premi鑢e imprimante USB: /dev/usb/lp0, deuxi鑝e imprimante "
+"USB: /dev/usb/lp1, ...)."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "Configuration actuelle de l'interface"
+msgid "Next"
+msgstr "Suivant ->"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "Montrer la configuration actuelle"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr ""
+"Vous ne pouvez pas installer le programme d'amor鏰ge\n"
+"sur une partition %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
-msgstr "Non (pour les experts)"
+msgid "CHAP"
+msgstr "CHAP"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguration automatique"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "BOOTP/DHCP/Zeroconf"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-"Attention, la carte r閟eau (%s) est d閖 configur閑.\n"
"\n"
-"D閟irez-vous une reconfiguration automatique?\n"
+"Bienvenue.\n"
"\n"
-"Vous pouvez le faire manuellement, mais vous devez savoir ce que vous faites."
+"Les param鑤res de l'installation automatique sont disponibles dans les "
+"sections sur la gauche."
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr "Interface r閟eau d閖 configur閑"
+msgid "Puerto Rico"
+msgstr "Puerto Rico"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Veuillez choisir quelle carte r閟eau sera connect閑 votre r閟eau local"
+"le paquetage 珷ImageMagick牷 est n閏essaire pour fonctionner correctement.\n"
+"Cliquez sur 珷Ok牷 pour l'installer ou 珷Annuler牷 pour quitter"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituanien 珷ligne de nombres牷 QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"Une seule carte r閟eau est configur閑 sur votre syst鑝e:\n"
+"Les paquetages suivants seront d閟install閟 pour permettre la mise jour: %"
+"s \n"
"\n"
-"%s\n"
"\n"
-"Je vais configurer votre r閟eau local avec cette carte r閟eau."
+"Souhaitez-vous r閑llement les d閟installer?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Carte r閟eau"
+msgid "Anguilla"
+msgstr "Anguilla"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Aucune carte r閟eau n'a 閠 d閠ect閑 sur votre syst鑝e. Veuillez utiliser "
-"l'outil de configuration du mat閞iel."
+msgid "NIS Domain"
+msgstr "Domaine NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "Aucune carte r閟eau n'est pr閟ente dans votre syst鑝e"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"- Donn閑s des utilisateurs:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
+msgid "Antarctica"
+msgstr "Antarctique"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (utilisant le module %s)"
+msgid "Mount options"
+msgstr "Options de montage"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "P閞iph閞ique r閟eau"
+msgid "Jamaica"
+msgstr "Jama飍ue"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Veuillez entrer le nom de l'interface par laquelle vous etes connect "
-"Internet.\n"
-"\n"
-"Exemples:\n"
-"\t\tppp+ pour une connection ADSL ou un modem,\n"
-"\t\teth0 ou eth1 pour connection par cable,\n"
-"\t\tippp+ pour une connection RNIS.\n"
+"Permet de faire appara顃re des p閞iph閞iques de type bloc (par ex. "
+"partitions de disque dur) comme des p閞iph閞iques bruts acc鑣 direct (raw "
+"devices). Les correspondances sont 閠ablies dans le fichier /etc/sysconfig/"
+"rawdevices, et c'est la commande 珷raw牷 qui est utilis閑. Cela peut 阾re "
+"utilis par des applications comme Oracle ou par des lecteurs de DVD."
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-"Vous 阾es sur le point de configurer votre ordinateur pour partager sa "
-"connexion internet.\n"
-"Avec cette fonction, d'autres ordinateurs sur votre r閟eau local pourront "
-"utiliser la connexion internet de cet ordinateur.\n"
-"\n"
-"Assurez-vous d'avoir configur votre acc鑣 R閟eau/Internet gr鈉e "
-"DrakConnect avant d'aller plus loin.\n"
+"Arguments: (arg, alerte=1)\n"
"\n"
-"Veuillez noter que vous avez besoin d'une carte r閟eau d閐i閑 votre r閟eau "
-"local."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Partage de la connexion internet"
+"Active/D閟active la protection contre l'usurpation de r閟olution de nom "
+"(name resolution spoofing).\n"
+"Si 珷alert牷 est 1, effectue aussi des rapports syslog."
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Le partage de la connexion internet est maintenant activ."
+msgid "Please wait, preparing installation..."
+msgstr "Veuillez patienter, pr閜aration de l'installation..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Activation des serveurs..."
+msgid "Czech (QWERTZ)"
+msgstr "Tch鑡ue (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
-msgstr "ne rien faire"
+msgid "Track network card id (useful for laptops)"
+msgstr "Suivre l'id. de la carte r閟eau (utile pour les portables)"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "reconfigure"
-msgstr "reconfigurer"
+msgid "The port number should be an integer!"
+msgstr "Le num閞o de port doit 阾re un nombre entier!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "enable"
-msgstr "activer"
+msgid "You must choose an image file first!"
+msgstr "Vous devez choisir une image d'abord!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion Internet a d閖 閠閈n"
-"effectu閑. Elle est actuellement d閟activ閑.\n"
-"\n"
-"Que souhaitez-vous faire?"
+msgid "Restore from Hard Disk."
+msgstr "Restaurer partir d'un dossier"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Le partage de la connexion Internet est d閟activ"
+msgid "Add to LVM"
+msgstr "Ajouter au LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Le partage de la connexion Internet est maintenant d閟activ."
+msgid "DNS server"
+msgstr "Serveur DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "D閟activation des serveurs..."
+msgid "Trinidad and Tobago"
+msgstr "Trinit-et-Tobago"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "d閟activer"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD et LPRng ne supportent pas les imprimantes IPP.\n"
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion Internet a d閖 閠閈n"
-"effectu閑. Elle est actuellement activ閑.\n"
-"\n"
-"Que souhaitez-vous faire?"
+msgid "simple"
+msgstr "simple"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Le partage de la connexion internet est activ"
+msgid "Clear all"
+msgstr "Supprimer toutes les partitions"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "D閟ol, nous ne prenons en charge que les noyaux (kernel) 2.4."
+msgid "No test pages"
+msgstr "Pas de page de test"
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Aucun navigateur n'est install sur votre syst鑝e. Veuillez en installer un "
-"si vous voulez consulter le syst鑝e d'aide."
+msgid "Adapter %s: %s"
+msgstr "Carte r閟eau %s: %s"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path"
-msgstr "Chemin"
+msgid "Falkland Islands (Malvinas)"
+msgstr "蝜es Malouinnes"
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "group :"
-msgstr "groupe:"
+msgid "Unknown model"
+msgstr "Mod鑜e inconnu"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "user :"
-msgstr "utilisateur:"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "Si oui, v閞ifie les fichiers/dossiers que tout le monde peut modifier"
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "Path selection"
-msgstr "S閘ection du chemin"
+msgid "authentication"
+msgstr "Authentification"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
-"une fois v閞ifi閟, le propri閠aire et le groupe ne seront plus modifi閟"
+msgid "Backup Now"
+msgstr "Sauvegarder!"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Use group id for execution"
-msgstr "Utiliser l'id du groupe lors de l'ex閏ution"
+msgid "/_File"
+msgstr "/_Fichier"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use owner id for execution"
-msgstr "Utiliser l'id du propri閠aire lors de l'ex閏ution"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Retrait de l'imprimante de StarOffice/OpenOffice"
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-"Utilis pour des dossiers:\n"
-"un fichier du dossier ne peut 阾re effac ou renomm que par le "
-"propri閠aire du dossier ou du fichier"
+"D閙arre le filtrage des paquets r閟eau pour la s閞ie 2.2 des noyaux Linux, "
+"afin de mettre en place un pare-feu (firewall) pour prot間er votre machine "
+"des attaques r閟eau. "
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "Tamoul (ISCII)"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Mayotte"
+msgstr "Mayotte"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Creating auto install floppy..."
+msgstr "Cr閍tion de la disquette d'auto-installation..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Property"
-msgstr "Propiet閟"
+msgid "Searching for scanners ..."
+msgstr "Recherche des scanners..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Permissions"
-msgstr "Permissions"
+msgid "Partitioning"
+msgstr "Partitionnement"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Current user"
-msgstr "Utilisateur courant"
+msgid "Russia"
+msgstr "Russie"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr "naviguer"
+msgid "ethernet card(s) detected"
+msgstr "carte(s) ethernet d閠ect閑(s)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
-msgstr "Modifier la r鑗le"
+msgid "Syslog"
+msgstr "Syslog"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
-msgstr "閐iter"
+msgid "Can't create catalog!"
+msgstr "Ne peut cr閑r le catalogue!"
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Delete selected rule"
-msgstr "Supprimer la r鑗le"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
+"Optimisez votre s閏urit avec ce logiciel tr鑣 facile utiliser combinant "
+"des 閘閙ents de haute performance : un pare-feu, un serveur et un client "
+"pour r閟eau priv virtuel (VPN), un syst鑝e de d閠ection d'intrusion et un "
+"gestionnaire de trafic."
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "delete"
-msgstr "supprimer"
+msgid "Not enough free space for auto-allocating"
+msgstr "Pas assez d'espace libre pour le partitionnement automatique"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "Ajouter une nouvelle r鑗le la fin"
+msgid "Set root password"
+msgstr "Mot de passe root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "add a rule"
-msgstr "Ajouter une r鑗le"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Il n'existe pas de pilote libre pour votre carte son (%s), mais il en existe "
+"un propri閠aire 珷%s牷"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule down one level"
-msgstr "Abaisser la priori閠 de la r鑗le d'un niveau"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"Apr鑣 avoir redimensionn la partition %s, toutes les donn閑s pr閟entes\n"
+"sur cette partition seront perdues"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Down"
-msgstr "descendre"
+msgid "Internet connection configuration"
+msgstr "Configuration de la connexion internet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule up one level"
-msgstr "Augmenter la priorit de la r鑗le d'un niveau"
+msgid "Scanning for TV channels"
+msgstr "Recherche des canaux de t閘関ision"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Up"
-msgstr "monter"
+msgid "Kernel:"
+msgstr "Noyau:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "select perm file to see/edit"
-msgstr "choisissez un fichier de permissions voir/modifier"
+msgid "/_About..."
+msgstr "/_A propos..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm permet de voir les fichiers utiliser pour corriger des "
-"permissions, propri閠aire et groupe gr鈉e msec.\n"
-"Vous pouvez aussi 閐iter vos propres r鑗les, prioritaires devant celles par "
-"d閒aut."
+msgid "Bengali"
+msgstr "Bengale"
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "permissions"
-msgstr "permissions"
+msgid "Preference: "
+msgstr "Pr閒閞ence: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "group"
-msgstr "groupe"
+msgid "Wizard..."
+msgstr "Assistant..."
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "user"
-msgstr "utilisateur"
+msgid "Services: %d activated for %d registered"
+msgstr "Services: %d activ閟 sur %d enregistr閟"
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "path"
-msgstr "chemin"
+msgid "Create a bootdisk"
+msgstr "Disquette d'amor鏰ge"
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Emplacement du fichier auto_install.cfg"
+msgid "Solomon Islands"
+msgstr "蝜es Salomon"
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Veuillez indiquer l'emplacement du fichier auto_install.cfg.\n"
-"\n"
-"Laissez le champ vide si vous ne voulez pas configurer de mode "
-"d'installation automatique.\n"
-"\n"
+msgid "(module %s)"
+msgstr "(module %s)"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Aucune image de CD ou de DVD trouv閑. Veuillez copier le programme "
-"d'installation et les paquetages rpm."
+msgid "Workgroup"
+msgstr "Groupe de travail"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No image found"
-msgstr "Aucune image trouv閑"
+msgid "Printer host name or IP"
+msgstr "Nom d'h魌e ou adresse IP de l'imprimante "
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installation image directory"
-msgstr "Dossier des images d'installation"
+msgid "Host Path or Module"
+msgstr "Chemin de l'h魌e ou du module"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-"Veuillez indiquer o les images d'installation seront disponibles.\n"
-"\n"
-"Si vous n'avez pas de dossier existant, veuillez copier le contenu du CD ou "
-"du DVD.\n"
-"\n"
+"Le nom de l'imprimante ne devrait contenir que des lettres, des nombres et "
+"des tirets bas (_)"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The DHCP end ip"
-msgstr "L'adresse DHCP de fin"
+msgid "Show current interface configuration"
+msgstr "Montrer la configuration actuelle"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "The DHCP start ip"
-msgstr "L'adresse DHCP de d閎ut"
+msgid "Development"
+msgstr "D関eloppement"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"Le serveur DHCP permettra aux autres ordinateurs de s'amorcer en utilisant "
-"le PXE dans la plage d'adresses donn閑.\n"
-"\n"
-"L'adresse r閟eau est %s, avec le masque %s.\n"
-"\n"
+msgid "Done"
+msgstr "Terminer"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interface %s (sur le r閟eau %s)"
+msgid "Web Server"
+msgstr "Serveur Web"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+msgid "\tDo not include System Files\n"
+msgstr "\tFichiers syst鑝es non inclus\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Chili"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-"Veuillez choisir la carte r閟eau qui sera utilis閑 pour le serveur DHCP"
+"Les pilotes d'impression inkjet fournis par Lexmark ne permettent que "
+"l'utilisation des imprimantes locales, et pas des imprimantes distantes ou "
+"des serveurs d'impression. Veuillez connecter votre imprimante sur un port "
+"local ou configurez-la sur la machine laquelle elle est connect閑."
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-"Vous vous appr阾ez installer un serveur PXE agissant comme un serveur "
-"DHCP,\n"
-"et un serveur TFTP comme un serveur d'installation.\n"
-"Avec cette fonction, d'autres ordinateurs sur votre r閟eau local pourront "
-"阾re install閟 partir de cet ordinateur.\n"
-"\n"
-"Assurez-vous d'avoir configur votre acc鑣 R閟eau/Internet avec DrakConnect "
-"avant d'aller plus loin.\n"
+"Votre p閞iph閞ique multifonction HP a 閠 configur automatiquement pour "
+"阾re capable de scanner. Maintenant vous pouvez scanner avec "
+"珷scanimage牷 ( 珷scanimage -d hp:%s牷 pour sp閏ifier le scanner si vous en "
+"avez plus d'un) partir de la ligne de commande, ou avec des interfaces "
+"graphiques comme 珷xscanimage牷 ou 珷xsane牷. Si vous utilisez 珷Le Gimp牷, "
+"vous pouvez aussi scanner gr鈉e au menu 珷Fichier / Acquisition牷. Pour "
+"avoir plus d'information, vous pouvez taper 珷man scanimage牷 dans une "
+"fen阾re de commandes.\n"
"\n"
-"Veuillez noter que vous avez besoin d'une carte r閟eau d閐i閑 votre r閟eau "
-"local."
+"N'utilisez pas 珷scannerdrake牷 pour cet appareil! "
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "Configuration du serveur d'installation"
+msgid "(already added %s)"
+msgstr "Utilisateur(s) existant(s): %s"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "Configuration du serveur PXE"
+msgid ", using command %s"
+msgstr ", en utilisant la commande %s"
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Veuillez patienter, configuration des options de s閏urit..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Touches Alt et Shift simultan閙ent"
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Veuillez patienter, configuration du niveau de s閏urit..."
+msgid "Flags"
+msgstr "Drapeaux"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Periodic Checks"
-msgstr "V閞ifications p閞iodiques"
+msgid "Add/Del Users"
+msgstr "Ajouter/Effacer un utilisateur"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "System Options"
-msgstr "Options syst鑝e"
+msgid "Host/network IP address missing."
+msgstr "Adresse IP de l'h魌e/r閟eau manquante."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Options"
-msgstr "Options r閟eau"
+msgid "weekly"
+msgstr "toutes les semaines"
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Param鑤res"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "L'adresse IP de l'h魌e/r閟eau n'est pas correcte.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Voici la liste compl鑤e des pays disponibles"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Page de test alternative (A4)"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-"Les options suivantes permettent de personnaliser la s閏urit de votre "
-"syst鑝e.\n"
-"Si vous avez besoin d'explications, jetez un oeil aux bulles d'aide.\n"
+"Si vous poss閐ez tous les CD-Rom ci-dessous, cliquez sur 珷OK牷.\n"
+"Si vous n'en poss閐ez aucun, cliquez sur 珷Annuler牷.\n"
+"Sinon, d閟閘ectionnez ceux que vous n'avez pas, puis cliquez sur 珷OK牷."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "Administrateur s閏urit闋:"
+msgid "Wait please"
+msgstr "Veuillez patienter"
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "Alertes de s閏urit闋:"
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "Niveau de s閏urit闋:"
+msgid "Backup user files"
+msgstr "Sauvegarde des comptes utilisateurs..."
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr "(valeur par d閒aut: %s)"
+msgid "New"
+msgstr "Nouveau"
-#: ../../standalone/draksec:1
-#, c-format
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
+#, fuzzy, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-"Standard: Ceci est le niveau standard de s閏urit recommand pour un "
-"ordinateur devant se connecter Internet en tant que client.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"蒷ev閑: il y a d閖 quelques restrictions, et un peu plus de v閞ifications "
-"de s閏urit sont effectu閑s chaque nuit.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Plus 閘ev閑: La s閏urit est ici suffisante pour utiliser la machine comme "
-"serveur acceptant de multiples connexions. Si votre machine est simplement "
-"une machine cliente pour Internet, un niveau inf閞ieur est pr閒閞able.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
-"Panao颽que: Similaire au pr閏閐ent, mais le syst鑝e sera totalement clos et "
-"la s閏urit au maximum.\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Administrateur de S閏urit闋: Si l'option 珷Alertes de s閏urit闋 est "
-"choisie, celles-ci seront envoy閑s l'utilisateur indiqu (nom ou\n"
-"courriel)."
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Vous devez prendre ici une d閏ision cruciale pour la s閏urit de votre\n"
+"syst鑝e. L'utilisateur 珷root牷 est l'administrateur du syst鑝e qui a tous\n"
+"les droits d'acc鑣 aux fichiers de configuration, etc. Il est donc\n"
+"imp閞atif de choisir un mot de passe difficile deviner (pensez aux\n"
+"syst鑝es pr関us cet effet qui anticipent les combinaisons communes des\n"
+"utilisateurs). DrakX vous avertira si le mot de passe entr est trop facile\n"
+" deviner. Comme vous pouvez le voir, il est 間alement possible de ne pas\n"
+"entrer de mot de passe. Nous d閏onseillons fortement cette pratique. Comme\n"
+"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
+"d閠ruire sur votre syst鑝e, c'est pourquoi le mot de passe doit agir comme\n"
+"barri鑢e l'entr閑.\n"
"\n"
+"Le mot de passe choisi devrait contenir au moins 8 caract鑢es\n"
+"alphanum閞iques. Ne jamais 閏rire un mot de passe, forcez-vous vous en\n"
+"souvenir par coeur. Il faut donc m閚ager accessibilit et m閙oire, donc un\n"
+"mot de passe de 30 caract鑢es est presque impossible m閙oriser.\n"
"\n"
+"Afin d'関iter les regards indiscrets, le mot de passe n'appara顃ra pas 郳n"
+"l'閏ran. Il vous faudra donc l'inscrire deux fois afin d'関iter les erreurs\n"
+"de frappe. 蓈idemment, si vous faites deux fois la m阭e erreur, celle-ci\n"
+"sera sauvegard閑 et vous devrez la reproduire afin d'acc閐er votre\n"
+"syst鑝e pour la premi鑢e fois.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
-msgstr ""
+"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
+"serveur d'authentification, tel que NIS ou LDAP. Si votre r閟eau utilise un\n"
+"de ces protocoles, il faut le s閘ectionner. Si vous n'en avez aucune id閑,\n"
+"demandez votre administrateur de r閟eau.\n"
"\n"
+"Si vous souhaitez que l'acc鑣 cette machine soit contr鬺 par un serveur\n"
+"d'authentification, cliquez sur le bouton 珷%s牷.\n"
"\n"
+"Si votre r閟eau utilise soit LDAP, NIS, ou un PDC Windows, choisissez-le\n"
+"comme protocole d'authentification. En cas de doute, demandez votre\n"
+"administrateur r閟eau.\n"
"\n"
-"Note: si vous avez une carte ISA PnP, vous devrez utiliser le programme "
-"sndconfig.\n"
-"Vous n'avez qu' taper 珷sndconfig牷 dans une console."
+"Si vous avez des probl鑝es vous souvenir de vos mots de passe, vous\n"
+"pouvez choisir 珷%s牷, si votre ordinateur ne sera pas connect Internet,\n"
+"et si vous avez confiance en tous ceux qui auront acc鑣 cette machine."
-#: ../../standalone/draksound:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-"Aucune carte son n'a 閠 d閠ect閑 sur votre ordinateur. Veuillez v閞ifier "
-"qu'une carte son support閑 par Linux est correctement branch閑.\n"
-"\n"
-"\n"
-"Vous pouvez visiter notre base de donn閑s de support mat閞iel 酄:\n"
-"\n"
+" cette 閠ape, vous devrez d閠erminer le niveau de s閏urit requis par\n"
+"votre syst鑝e. Le niveau de s閏urit requis se d閠ermine en fonction de\n"
+"l'exposition du syst鑝e d'autres utilisateurs (s'il est connect閈n"
+"directement sur Internet par exemple) et selon le niveau de sensibilit de\n"
+"l'information contenu dans le syst鑝e. Sachez que, de mani鑢e g閚閞ale,\n"
+"plus la s閏urit d'un syst鑝e est 閘ev閑, plus il est complexe utiliser.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Aucune carte son d閠ect閑!"
+"Si vous ne savez pas quel niveau choisir, gardez la s閘ection par d閒aut."
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "Aper鐄 de l'閏ran de d閙arrage %s (%s)"
+msgid "Load from floppy"
+msgstr "Charger partir d'une disquette..."
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generating preview ..."
-msgstr "Cr閍tion de l'aper鐄 ..."
+msgid "The following printer was auto-detected. "
+msgstr "L'imprimante suivante a 閠 d閠ect閑."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "Vous devez choisir une image d'abord!"
+msgid "Boot Floppy"
+msgstr "Disquette de d閙arrage"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "S閘ection de couleur de la barre de progression"
+msgid "Norwegian"
+msgstr "Norv間ien"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Ces th鑝es n'avaient pas encore d'image de d閙arrage dans %s!"
+msgid "Searching for new scanners ..."
+msgstr "Recherche de nouveaux scanners..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "sauvegarde du th鑝e de d閙arrage..."
+msgid "Apache World Wide Web Server"
+msgstr "Apache (serveur www)"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "choose image file"
-msgstr "choisissez un fichier image"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "num閞o de sous-mod鑜e du processeur (stepping)"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "choose image"
-msgstr "choisissez l'image"
+msgid "select path to restore (instead of /)"
+msgstr "Choisir un chemin de restauration ( au lieu de / )"
#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Cr閑r une image de d閙arrage"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Rendre non bavards les messages noyau"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "Affiche le logo dans la console"
+msgid "China"
+msgstr "Chine"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose color"
-msgstr "Choisissez une couleur"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "(V閞ifiez que toutes les imprimantes sont connect閑s et allum閑s).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Save theme"
-msgstr "sauvegarder le th鑝e"
+msgid "Georgia"
+msgstr "G閛rgie"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, c-format
-msgid "Preview"
-msgstr "aper鐄"
+msgid "Reading data of installed printers..."
+msgstr "Lecture des donn閑s des imprimantes install閑s..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "la couleur de la barre de progression"
+msgid " Erase Now "
+msgstr "Effacer maintenant"
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr "la hauteur de la barre de progression"
+msgid "server"
+msgstr "serveur"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "la largeur de la barre de progression"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Ins閞ez une disquette format閑 en FAT (format DOS/Windows) %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"coordonn閑s y du coin sup閞ieur gauche\n"
-"de la barre de progression"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "\"oui\" signifie qu'un coprocesseur arithm閠ique est pr閟ent"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"coordonn閑s x du coin sup閞ieur gauche\n"
-"de la barre de progression"
+msgid "Please Wait... Applying the configuration"
+msgstr "Veuillez patienter... Mise en place de la configuration"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr "hauteur de la zone de texte"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Bienvenue dans GRUB, le chargeur de systemes d'exploitation"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr "largeur du texte"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"coordonn閑s y de la zone de texte\n"
-"en nombre de caract鑢es"
+msgid "SCSI controllers"
+msgstr "Contr鬺eurs SCSI"
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"coordonn閑s x de la zone de texte\n"
-"en nombre de caract鑢es"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " sur serveur d'impression LPD 珷%s牷, imprimante 珷%s牷"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
-msgstr "Naviguer"
+msgid "Choosing a display manager"
+msgstr "Choix d'un gestionnaire de connexion"
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Theme name"
-msgstr "nom du th鑝e"
+msgid "Zeroconf Host name"
+msgstr "Nom d'h魌e燴eroConf"
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "final resolution"
-msgstr "r閟olution finale"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "L'adresse IP doit ressembler quelque chose comme 珷192.168.1.20牷"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "first step creation"
-msgstr "Cr閍tion de la 1ere 閠ape"
+msgid "Ecuador"
+msgstr "蓂uateur"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"le paquetage 珷ImageMagick牷 est n閏essaire pour fonctionner correctement.\n"
-"Cliquez sur 珷Ok牷 pour l'installer ou 珷Annuler牷 pour quitter"
+msgid "Add an item"
+msgstr "Ajouter un 閘閙ent"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-"Aucune carte TV n'a 閠 d閠ect閑 sur votre ordinateur. Veuillez v閞ifier "
-"qu'une carte TV/Vid閛 support閑 par Linux est correctement branch閑.\n"
-"\n"
-"\n"
-"Vous pouvez visiter notre base de donn閑s de support mat閞iel 酄:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Les imprimantes de cette machine sont disponibles aux autres ordinateurs"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "Aucune carte TV d閠ect閑!"
+msgid "I can't find needed image file `%s'."
+msgstr "Impossible de trouver le fichier image 珷%s牷."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Maintenant vous pouvez lancer xawtv (sous X-Window)!\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr ""
+"Aucune carte son d閠ect閑. Essayez avec 珷harddrake牷 apr鑣 l'installation"
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Have a nice day!"
-msgstr "Passez une bonne journ閑!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"Le port entr est incorrect: %s.\n"
+"Le bon format est 珷port/tcp牷 ou 珷port/udp牷, \n"
+"o le port est compris entre 1 et 65535."
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV n'est pas install闋!"
+msgid "Shell"
+msgstr "Interpr閠eur"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Une erreur est survenue pendant la recherche des cha頽es TV."
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "Recherche des canaux de t閘関ision"
+msgid "Sao Tome and Principe"
+msgstr "Sao Tom-et-Principe"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Recherche des canaux de t閘関ision en cours ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "Impossible de se connecter avec le nom %s (mauvais mot de passe?)"
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Area:"
-msgstr "Zone:"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerba飀janais (latin)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "TV norm:"
-msgstr "Norme TV:"
+msgid "Package not installed"
+msgstr "Paquetage non install"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"SVP,\n"
-"Veuillez choisir votre r間ion et votre norme de TV"
+msgid "Become a MandrakeExpert"
+msgstr "Devenez un Expert Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Australian Optus cable TV"
-msgstr "C鈈le TV australien Optus"
+msgid "American Samoa"
+msgstr "Samoa Am閞icaine"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Newzealand"
-msgstr "Nouvelle Z閘ande"
+msgid "Protocol"
+msgstr "Protocole"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "France [SECAM]"
-msgstr "France [SECAM]"
+msgid "Copy fonts on your system"
+msgstr "Copier les polices sur votre syst鑝e"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "East Europe"
-msgstr "Europe de l'est"
+msgid "Harddrake help"
+msgstr "Aide de Harddrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "West Europe"
-msgstr "Europe de l'ouest"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "China (broadcast)"
-msgstr "Chine (hertzien)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Configuration du Serveur de Terminaux Mandrake"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (cable)"
-msgstr "Japon (c鈈le)"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+" D閠ails du rapport de sauvegarde\n"
+"\n"
+"\n"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japon (hertzien)"
+msgid "Restore all backups"
+msgstr "Restaurer toutes les sauvegardes..."
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (c鈈le)"
+msgid "if set to yes, check open ports."
+msgstr "Si oui, v閞ifie les ports ouverts du r閟eau."
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (c鈈le ou HRC)"
+msgid "This may take a moment to erase the media."
+msgstr "Effacer le support peut prendre un moment."
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "USA (cable)"
-msgstr "USA (c鈈le)"
+msgid "You can't select/unselect this package"
+msgstr "Vous ne pouvez pas s閘ectionner/d閟閘ectionner ce paquetage"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (hertzien)"
+msgid "Warning"
+msgstr "Attention"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
msgstr ""
-"XawTV n'est pas install闋!\n"
-"\n"
"\n"
-"Si vous avez une carte TV mais que DrakX ne l'a pas d閠ect閑 (pas de\n"
-"module bttv ni saa7134 dans 珷/etc/modules牷) ou que DrakX n'a pas install "
-"xawtv,\n"
-"envoyez, s'il vous pla顃, le r閟ultat de la commande 珷lspcidrake -v -f牷\n"
-" 珷install\\@mandrakesoft.com牷 avec comme sujet 珷undetected TV card牷.\n"
-"\n"
-"\n"
-"Vous pouvez quand m阭e l'installer en tapant 珷urpmi xawtv牷 dans un "
-"terminal en tant que root."
+"- Autres fichiers ou dossiers:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "ma顃re"
+msgid "Remote host name"
+msgstr "Nom d'h魌e du serveur"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "secondary"
-msgstr "esclave"
+msgid "deactivate now"
+msgstr "d閟activer maintenant"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Cliquez sur un p閞iph閞ique dans l'arborescence afin de consulter les "
-"informations correspondantes."
+msgid "access to X programs"
+msgstr "acc鑣 aux programmes graphiques"
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "Inconnu"
+msgid "Computing the size of the Windows partition"
+msgstr "Calcul de l'espace libre sur la partition Windows"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "unknown"
-msgstr "inconnu"
+msgid "Italy"
+msgstr "Italie"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "Lancement de 珷%s牷..."
+msgid "Name of printer"
+msgstr "Nom de l'imprimante"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Run config tool"
-msgstr "Lancer l'outil de configuration"
+msgid "disable"
+msgstr "d閟activer"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Configure module"
-msgstr "Configuration du module"
+msgid "error unmounting %s: %s"
+msgstr "Le d閙ontage de %s a 閏hou闋: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Information"
-msgstr "Informations"
+msgid "Do it!"
+msgstr "Faire"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "Mat閞iel d閠ect"
+msgid "Cayman Islands"
+msgstr "蝜es Ca飉an"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 version "
+msgid "%s not responding"
+msgstr "%s ne r閜ond pas"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "D閠ection en cours"
+msgid "Select model manually"
+msgstr "S閘ectionner manuellement le mod鑜e"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Author:"
-msgstr "Auteur:"
+msgid "Format"
+msgstr "Formater"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-"Harddrake est l'outil de configuration Mandrake du mat閞iel.\n"
-"Version:"
+"La fa鏾n la plus courante de se connecter Internet en utilisant\n"
+"une ligne ADSL est d'utiliser 珷pppoe牷.\n"
+"\n"
+"Certaines connexions utilisent 珷pptp牷, quelques unes se servent de "
+"珷DHCP牷.\n"
+"\n"
+"Si vous ne savez pas quoi choisir, utilisez pppoe."
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "A propos de Harddrake"
+msgid "Various"
+msgstr "Divers"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_A propos..."
+msgid "Zip"
+msgstr "Lecteurs Zip"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Signaler une bogue"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Le mod鑜e de votre imprimante %s n'a pas pu 阾re d閠ermin. Veuillez choisir "
+"le mod鑜e correct dans la liste."
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-"Apr鑣 avoir s閘ectionn un p閞iph閞ique, vous pourrez consulter les "
-"informations correspondantes dans la partie droite (珷Information牷)"
+"\n"
+"Cochez les imprimantes que vous voulez transf閞er, et\n"
+"cliquez sur 珷Transfert牷."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "S閘ectionnez un p閞iph閞ique!"
+msgid "PDQ"
+msgstr "PDQ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albanais"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Lituanie"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Compact"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Detected model: %s %s"
+msgstr "Mod鑜e d閠ect闋: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft a s閘ectionn les meilleurs logiciels pour vous"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
"\n"
msgstr ""
-"Description des champs:\n"
-"\n"
+"Harddrake est l'outil de configuration Mandrake du mat閞iel.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "Aide de Harddrake"
+msgid "Local files"
+msgstr "Fichiers locaux"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_Fields description"
-msgstr "/_Description des champs"
+msgid "maybe"
+msgstr "関entuellement"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/_Aide"
+msgid "Panama"
+msgstr "Panama"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_Quitter"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"Votre carte graphique semble avoir un connecteur TV-OUT.\n"
+"Elle peut 阾re configur閑 pour fonctionner avec le 珷frame-buffer牷.\n"
+"\n"
+"Pour cela vous devez connecter votre carte graphique votre TV avant de "
+"d閙arrer votre ordinateur.\n"
+"Ensuite choisissez l'option 珷TVout牷 dans le menu d'amor鏰ge\n"
+"\n"
+"Avez-vous cette fonction?"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Auto-d閠ecter les p閞iph閞iques Jazz"
+msgid "Monitor"
+msgstr "Moniteur"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Auto-d閠ecter les _modems"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Vous 阾es sur le point de param閠rer l'impression vers un compte Windows "
+"avec mot de passe. A cause d'une erreur dans la conception du logiciel "
+"client Samba, le mot de passe est inscrit en clair dans la ligne de commande "
+"qu'il envoie pour transmettre le travail d'impression au serveur Windows. Il "
+"est donc possible pour n'importe quel utilisateur de cette machine "
+"d'afficher l'閏ran ce mot de passe, simplement en tapant une commande "
+"comme 珷ps auxwww牷.\n"
+"\n"
+"Nous vous conseillons d'utiliser les solutions alternatives suivantes (dans "
+"tous les cas, vous devez vous assurer que seules les machines de votre "
+"r閟eau local peuvent acc閐er votre serveur Windows, l'aide d'un pare-feu "
+"logiciel (firewall) par exemple):\n"
+"\n"
+"Utilisez un compte sans mot de passe sur votre serveur Windows, tel que le "
+"compte 珷Invit闋 ou alors un compte d閐i sp閏ialement l'impression. "
+"N'enlevez pas la protection d'un compte Utilisateur ou Administrateur.\n"
+"\n"
+"Param閠rez votre serveur Windows afin que les imprimantes soient disponibles "
+"sous le protocole LPD. R間lez ensuite l'impression de cette machine-ci avec "
+"le type de connexion 珷%s牷 dans Printerdrake.\n"
+"\n"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Auto-d閠ecter les _imprimantes"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mille couleurs (16 bits)"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_Options"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Sauvegarde sur le disque dur dans le dossier: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "le nom du vendeur de ce processeur"
+msgid "Size: %d KB\n"
+msgstr "Taille: %d Ko\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "le nom du vendeur de ce p閞iph閞ique"
+msgid "Remove fonts on your system"
+msgstr "Retirer des polices de votre syst鑝e"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Le type de bus sur lequel la souris est connect閑"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"Attention, la carte r閟eau (%s) est d閖 configur閑.\n"
+"\n"
+"D閟irez-vous une reconfiguration automatique?\n"
+"\n"
+"Vous pouvez le faire manuellement, mais vous devez savoir ce que vous faites."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "num閞o de sous-mod鑜e du processeur (stepping)"
+msgid "Graphical interface at startup"
+msgstr "Interface graphique lors du d閙arrage"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model stepping"
-msgstr "Num閞o de mod鑜e"
+msgid "Please enter the directory to save:"
+msgstr "Dossier o poser la sauvegarde:"
#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Le format des disquettes que le lecteur accepte"
+
+#: ../../raid.pm:1
#, c-format
-msgid "the number of the processor"
-msgstr "le num閞o du processeur"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Trop peu de partitions pour du RAID de niveau %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Processor ID"
-msgstr "Identifiant du processeur"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Les imprimantes suivantes sont configur閑s. Cliquez sur l'une d'entre elles "
+"pour modifier ses param鑤res, en faire l'imprimante par d閒aut ou consulter "
+"les informations son propos."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "network printer port"
-msgstr "port de l'imprimante r閟eau"
+msgid "Connected"
+msgstr "Connect"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the name of the CPU"
-msgstr "le nom du processeur"
+msgid "USB printer \\#%s"
+msgstr "Imprimante USB %s"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name"
-msgstr "Nom"
+msgid "Macedonian"
+msgstr "Mac閐onien"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "le nombre de boutons que poss鑔e la souris"
+msgid "Bridges and system controllers"
+msgstr "Ponts et contr鬺eurs syst鑝e"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Number of buttons"
-msgstr "Nombre de bouttons"
+msgid "/File/_Save"
+msgstr "/Fichier/Enregi_strer"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Le nom officiel du vendeur de ce processeur"
+msgid "Mali"
+msgstr "Mali"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Model name"
-msgstr "Nom du mod鑜e"
+msgid "No details"
+msgstr "Pas de d閠ails"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "G閚閞ation du processeur (exemple: 8 pour les Pentium III, ...)"
+msgid "very nice"
+msgstr "tr鑣 utile"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model"
-msgstr "Mod鑜e"
+msgid "Preview"
+msgstr "aper鐄"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "hard disk model"
-msgstr "Mod鑜e de disque dur"
+msgid "Remote Control"
+msgstr "Contr鬺e distance"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "class of hardware device"
-msgstr "classe de mat閞iel"
+msgid "Please select media for backup..."
+msgstr "Veuillez choisir le support de sauvegarde..."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Media class"
-msgstr "Classe de mat閞iel"
+msgid "XFree86 server: %s\n"
+msgstr "Serveur XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr "Sous-g閚閞ation de processeur"
+msgid "Allow Thin Clients"
+msgstr "Autoriser les client l間ers"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Level"
-msgstr "Niveau"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "G閛rgien (disposition russe)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Le format des disquettes que le lecteur accepte"
+msgid "/_Options"
+msgstr "/_Options"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy format"
-msgstr "Type de lecteur de disquette"
+msgid "Your printer model"
+msgstr "Le mod鑜e de votre imprimante"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-"Certaines vielles puces i486DX-100 ne peuvent pas red閙arrer de fa鏾n fiable "
-"apr鑣 une instruction \"halt\"."
+"\n"
+"\n"
+"(ATTENTION! Vous utilisez XFS pour votre partition racine,\n"
+"cr閑r une disquette d'amor鏰ge 1.44燤o va probablement 閏houer,\n"
+"parce que XFS a besoin d'un pilote tr鑣 gros)."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
-msgstr "Bogue de l'instruction halt"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Efface les fichiers du disque dur apr鑣 sauvegarde.\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-"Les premiers Pentium 閠aient bogu閟 et se bloquaient pendant le d閏odage du "
-"bytecode f00f"
+"Aucune image de CD ou de DVD trouv閑. Veuillez copier le programme "
+"d'installation et les paquetages rpm."
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "F00f bug"
-msgstr "bogue f00f"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Le logiciel de configuration universel de Mandrake"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "\"oui\" signifie que le coprocesseur poss鑔e un vecteur d'exception"
+msgid "Save"
+msgstr "Valider"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Est-ce que le FPU a un vecteur d'IRQ"
+msgid "The %s is unsupported"
+msgstr "%s n'est pas support"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "\"oui\" signifie qu'un coprocesseur arithm閠ique est pr閟ent"
+msgid "Load the drivers for your usb devices."
+msgstr "Charger les pilotes pour vos p閞iph閞iques USB."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Is FPU present"
-msgstr "Coprocesseur arithm閠ique pr閟ent"
+msgid "Disk"
+msgstr "Disques"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter a printer device URI"
+msgstr "Indiquer l'adresse du p閞iph閞ique d'impression"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-"Les premiers Pentium produits ont un bogue dans leur unit de calcul en "
-"nombres flottants qui emp阠he d'avoir la pr閏ision n閏essaire lors d'une "
-"op閞ation de division en flottants (FDIV)."
+"Le succ鑣 de MandrakeSoft est bas sur le logiciel libre. Votre nouveau "
+"syst鑝e d'exploitation est le r閟ultat du travail de la communaut Linux "
+"mondiale."
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr "Bogue de l'instruction FDIV"
+msgid "Israel"
+msgstr "Isra雔"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Drapeaux processeurs indiqu閟 par du noyau"
+msgid "French Guiana"
+msgstr "Guyane Fran鏰ise"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "Drapeaux"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "le module du noyau GNU/Linux qui g鑢e ce p閞iph閞ique"
+msgid "add a rule"
+msgstr "Ajouter une r鑗le"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "Module"
+msgid "A command line must be entered!"
+msgstr "Une ligne de commande doit 阾re tap閑!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "nouveau nom de p閞iph閞ique dynamique g閚閞 par devfs"
+msgid "Select user manually"
+msgstr "S閘ectionner individuellement les utilisateurs"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "Nouveau p閞iph閞ique devfs"
+msgid "Transfer printer configuration"
+msgstr "Transfert de la configuration de l'imprimante"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "ancien nom de p閞iph閞ique statique utilis dans le paquetage dev"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Souhaitez-vous activer l'impression sur les imprimantes ci-dessus?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "Ancien nom de p閞iph閞ique"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"Pour que cela fonctionne avec un Contr鬺eur Principal de Domaine (PDC) "
+"Windows 2000, vous devrez probablement demander l'administrateur de "
+"lancer: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
+"everyone /add et de red閙arrer le serveur.\n"
+"Vous aurez aussi besoin du nom utilisateur et du mot de passe d'un "
+"administrateur de domaine pour joindre la machine au domaine Windows(tm).\n"
+"Si le r閟eau n'est pas encore activ, le domaine sera joint apr鑣 l'閠ape de "
+"configuration du r閟eau.\n"
+"Si cette 閠ape 閏houe pour quelque raison que ce soit et que "
+"l'authentification de domaine ne fonctionne pas, lancez 'smbpasswd -j DOMAIN "
+"-U USER%%PASSWORD' en utilisant votre domaine Windows(tm), et vos nom "
+"d'administrateur et mot de passe, apr鑣 le d閙arrage du syst鑝e.\n"
+"La commande 'wbinfo -t' permet de tester la validit de votre "
+"authentification."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr "Ce champs d閏rit le p閞iph閞ique"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "Sauvegarder via le r閟eau"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-"La fr閝uence du processeur en MHz (les m間a hertz sont en premi鑢e\n"
-"approximation le nombre d'instructions ex閏utables par seconde par le\n"
-"processeur)"
+"Arguments: (arg)\n"
+"\n"
+"Active/D閟active la demande de mot de passe en mode mono-utilisateur."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr "Fr閝uence (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"C'est maintenant le moment de choisir les paquetages qui seront install閟\n"
+"sur votre syst鑝e. Sachez que Mandrake Linux contient plusieurs milliers de\n"
+"paquetages installer, et qu'il n'est pas n閏essaire de tous les conna顃re\n"
+"par coeur.\n"
+"\n"
+"Les paquetages sont regroup閟 selon la nature de l'installation. Les\n"
+"groupes sont divis閟 en quatre sections principales :\n"
+"\n"
+" * 珷%s牷: si vous comptez utiliser votre machine ainsi, s閘ectionner un ou\n"
+"plusieurs groupes y correspondant.\n"
+"\n"
+" * 珷%s牷: si votre syst鑝e doit 阾re utilis pour la programmation,\n"
+"choisissez les groupes d閟ir閟.\n"
+"\n"
+" * 珷%s牷: finalement, si votre syst鑝e doit agir en tant que serveur, vous\n"
+"pourrez s閘ectionner les services que vous voulez installer.\n"
+"\n"
+" * 珷%s牷: ce groupe vous permettra de d閠erminer quel environnement\n"
+"graphique vous voulez avoir sur votre syst鑝e. 蓈idemment, il vous en faut\n"
+"au moins un pour utiliser votre station en mode graphique.\n"
+"\n"
+"En pla鏰nt votre souris au dessus d'un nom de groupe, vous verrez\n"
+"appara顃re une courte description de ce groupe. Si vous d-s閘ectionnez\n"
+"tous les groupes lors d'une installation standard (par opposition une\n"
+"mise jour), un dialogue appara顃ra proposant diff閞entes options pour une\n"
+"installation minimale :\n"
+"\n"
+" * 珷%s牷 : installe le moins de paquetages possible pour avoir un\n"
+"environnement de travail graphique ;\n"
+"\n"
+" * 珷%s牷 : installe le syst鑝e de base plus certains utilitaires de base\n"
+"et leur documentation. Cette installation est utilisable comme base pour\n"
+"monter un serveur ;\n"
+"\n"
+" * 珷%s牷 : installera le strict minimum n閏essaire pour obtenir un syst鑝e\n"
+"GNU/Linux fonctionnel, en ligne de commande. Cette installation prends 郳n"
+"peu pr鑣 65 MO.\n"
+"\n"
+"Vous pouvez finalement cocher l'option 珷%s牷. Cette option est utiliser\n"
+"si vous connaissez exactement le paquetage d閟ir ou si vous voulez avoir\n"
+"le contr鬺e total de votre installation.\n"
+"\n"
+"Si vous avez d閙arr l'installation en mode 珷%s牷, vous pouvez\n"
+"珷d-s閘ectionner牷 tous les groupes afin d'関iter l'installation de\n"
+"nouveaux programmes. Cette option est tr鑣 utile pour restaurer un syst鑝e\n"
+"d閒ectueux."
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Niveau d'information qui peut 阾re obtenu par l'instruction cpuid"
+msgid "Accept user"
+msgstr "Accepter"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "Niveau CPUID"
+msgid "Server"
+msgstr "Serveur"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Famille du processeur (exemple: 6 pour la classe des i686)"
+msgid "Bad choice, try again\n"
+msgstr "Choix erron, veuillez recommencer\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "Famille CPUID"
+msgid "Heard and McDonald Islands"
+msgstr "蝜es Heard et McDonald"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Le processeur a-t-il le bogue de virgule du Cyrix 6x86?"
+msgid "No alternative driver"
+msgstr "Pas de pilote alternatif"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "Bogue de virgule"
+msgid "Toggle to expert mode"
+msgstr "Passer en mode expert"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"caract閞istiques sp閏iales du lecteur (capable de graver des m閐ias ou de "
-"lire des DVD)"
+msgid "(on this machine)"
+msgstr "(sur cette machine)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "Sp閏ificit閟 du lecteur"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr ""
+"L'adresse de la passerelle doit ressembler quelque chose comme "
+"珷192.168.1.20牷"
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Taille du cache (de second niveau) du processeur"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+"Winmodem d閠ect bas sur 珷%s牷. Voulez-vous installer le logiciel "
+"appropri闋?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "Taille du cache"
+msgid "Looking at packages already installed..."
+msgstr "Recherche des paquetages d閖 install閟..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- p閞iph閞iques PCI: slot, p閞iph閞iques et fonction PCI de cette carte\n"
-"- p閞iph閞iques EIDE: ce p閞iph閞ique est soit ma顃re, soit esclave\n"
-"- p閞iph閞iques SCSI: le bus et l'identifiant SCSI"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "Position sur le bus"
+msgid "Driver"
+msgstr "Pilote"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- p閞iph閞iques PCI et USB: liste des identifiants vendeur, p閞iph閞iques, "
-"sous-vendeur, et sous-p閞iph閞iques PCI/USB"
+"Linuxconf effectue certaines t鈉hes au d閙arrage afin de maintenir la "
+"configuration du syst鑝e."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "Identification de Bus"
+msgid "Printer on remote lpd server"
+msgstr "Imprimante sur serveur LPD distant"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"Le noyau Linux doit ex閏uter une boucle de calcul au d閙arrage pour "
-"initialiser un compteur d'horloge. Le r閟ultat est donn sous la forme de "
-"bogomips et donne une indication sur les performances du processeur."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Avant d'installer des polices de caract鑢es, assurez-vous que vous avez\n"
+"les permissions de les utiliser et de les installer sur votre syst鑝e. \n"
+"\n"
+"- Vous pouvez installer les polices par la voie habituelle. Dans de rares "
+"cas,\n"
+"des polices bogu閑s peuvent bloquer votre serveur d'affichage XFree."
-#: ../../standalone/harddrake2:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Nappe EIDE/Canal SCSI"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot est un chargeur de d閙arrage pour les 閝uipements NewWorld\n"
+"MacIntosh. Il est capable de d閙arrer soit GNU/Linux, MacOS ou MacOSX,\n"
+"s'ils sont pr閟ents sur votre ordinateur bien entendu. Normalement, ces\n"
+"syst鑝es d'exploitation sont correctement d閠ect閟 et install閟. Si ce\n"
+"n'est pas le cas, vous pouvez maintenant ajouter une entr閑 la main.\n"
+"Soyez prudent et choisissez les bons param鑤res.\n"
+"\n"
+"Les options principales de Yaboot sont :\n"
+"\n"
+" * Message Init : un message texte appara顃 l'invite de d閙arrage ;\n"
+"\n"
+" * P閞iph閞ique de d閙arrage (珷Boot牷) : indique o vous voulez placer\n"
+"l'information n閏essaire pour d閙arrer GNU/Linux. G閚閞alement, il est\n"
+"pr閒閞able de cr閑r une partition bootstrap avant l'installation pour\n"
+"contenir cette information ;\n"
+"\n"
+" * D閘ai Open Firmware : contrairement LILO, deux d閘ais sont disponibles\n"
+"pour yaboot. Le premier se mesure en secondes et cette 閠ape, vous pouvez\n"
+"choisir entre le CD, l'amor鏰ge OF (Open Firmware), MacOS ou Linux ;\n"
+"\n"
+" * Expiration du d閙arrage du noyau (珷Kernel Boot Timeout牷 : cette\n"
+"expiration de temps est similaire au d閘ai de d閙arrage de LILO. Apr鑣\n"
+"avoir choisi Linux, il y aura un d閘ai de 0,1 secondes avant que le noyau\n"
+"par d閒aut soit choisi ;\n"
+"\n"
+" * Activer le d閙arrage via un CD ? : en cochant cette option, vous pourrez\n"
+"choisir l'option 珷C牷 pour d閙arrer avec un CD lors de la premi鑢e invite\n"
+"de d閙arrage ;\n"
+"\n"
+" * Activer le d閙arrage OF ? : en choisissant cette option, vous pourrez\n"
+"s閘ectionner la touche 珷N牷 pour activer Open Firmware lors de la premi鑢e\n"
+"invite de d閙arrage ;\n"
+"\n"
+" * OS par d閒aut : vous pouvez choisir le syst鑝e d'exploitation qui\n"
+"d閙arrera par d閒aut lorsque le d閘ai de temps attribu Open Firmware\n"
+"expire."
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "Canal"
+msgid "No mouse"
+msgstr "Pas de souris"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"ceci est le bus physique sur lequel le p閞iph閞ique est connect (ex: PCI, "
-"USB, ...)"
+msgid "Germany"
+msgstr "Allemagne"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "Austria"
+msgstr "Autriche"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "list des autres pilotes pour cette carte son"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "Lancez 珷sndconfig牷 apr鑣 l'installation pour configurer la carte son"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "Autres pilotes"
+msgid "Collapse Tree"
+msgstr "R閐uire l'arborescence"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Souhaitez-vous que la touche BackSpace retourne Delete en console?"
+msgid "Auto Install Configurator"
+msgstr "Configurateur d'installation automatis閑"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
+msgid "Configure networking"
+msgstr "Configuration du r閟eau"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Impossible de d閙arrer la mise jour!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "O d閟irez-vous installer le programme d'amor鏰ge?"
-#: ../../standalone/livedrake:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"Changement de CD-Rom\n"
+"La premi鑢e 閠ape consiste choisir votre langue.\n"
"\n"
-"Veuillez ins閞er le CD-Rom d'installation dans votre lecteur.\n"
-"Ceci fait, cliquez sur 珷OK牷.\n"
+"Le choix de la langue sera appliqu la documentation, l'installation et\n"
+"le syst鑝e en g閚閞al. Commencez par choisir la r間ion o vous vous situez,\n"
+"puis la langue que vous parlez.\n"
"\n"
-"Si vous ne le poss閐ez pas, cliquez sur 珷Annuler牷 pour annuler la mise "
-"jour."
+"En cliquant sur 珷%s牷, le programme vous proposera 間alement des langues\n"
+"compl閙entaires pouvant 阾re install閑s sur votre station de travail. En\n"
+"choisissant des langues suppl閙entaires, le programme vous installera toute\n"
+"la documentation et les applications n閏essaires l'utilisation de ces\n"
+"langues. Par exemple, si vous pr関oyez d'accueillir des utilisateurs\n"
+"d'Espagne sur votre machine, choisissez le fran鏰is comme langue principale\n"
+"dans l'arborescence, et 珷%s牷, dans la section avanc閑.\n"
+"\n"
+"Remarquez que vous n'阾es pas limit une langue suppl閙entaire. Vous\n"
+"pouvez en choisir plusieurs, ou m阭e les installer toutes en choisissant\n"
+"珷%s牷. Choisir le support pour une langue signifie ajouter les\n"
+"traductions, les polices, correcteurs orthographiques, etc. La case 珷%s牷\n"
+"force le syst鑝e utiliser l'encodage unicode (UTF-8). Mais c'est une\n"
+"fonctionnalit exp閞imentale. Toutefois, si vous s閘ectionnez des langages\n"
+"qui n閏essitent des encodages incompatibles, le support unicode sera\n"
+"install de toutes fa鏾ns.\n"
+"\n"
+"Pour passer d'une langue l'autre, vous pouvez lancer l'utilitaire\n"
+"珷/usr/sbin/localedrake牷 en tant que 珷root牷 pour changer la langue\n"
+"utilis閑 dans tout le syst鑝e ; connectez-vous en simple utilisateur pour\n"
+"ne changer que la langue de cet utilisateur."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Changer de CD-Rom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s n'est pas support par cette version de Mandrake Linux."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Les changements ont 閠 effectu閟 mais ne seront effectifs qu'apr鑣 votre "
-"d閏onnexion"
+msgid "DHCP client"
+msgstr "Client DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Enregistrer sous..."
+msgid "Restoring from file %s failed: %s"
+msgstr "Restauration impossible depuis le fichier %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "Veuillez entrer votre adresse courriel ci -dessous"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Souris Logitech (s閞ie, ancien mod鑜e C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "configuration des alertes"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "蕋es-vous s鹯 de vouloir d閒inir l'impression sur cette machine?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Vous recevrez une alerte si la charge machine d閜asse cette valeur"
+msgid "New devfs device"
+msgstr "Nouveau p閞iph閞ique devfs"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "chargement des param鑤res"
+msgid "ERROR: Cannot spawn %s."
+msgstr "ERREUR: Impossible de lancer %s."
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Vous recevrez une alerte si l'un des services s閘ectionn閟 ne tourne plus"
+msgid "Boot Style Configuration"
+msgstr "Configuration du style de d閙arrage"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "service setting"
-msgstr "configuration des services"
+msgid "Automatic time synchronization"
+msgstr "Synchronisation automatique de l'horloge"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "Service Xinetd"
+msgid "Backup files not found at %s."
+msgstr "Fichiers de sauvegardes non trouv閟 sur %s."
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "Service Webmin"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Merci d'avoir choisi Mandrake Linux 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "Serveur SSH"
+msgid "Armenian (phonetic)"
+msgstr "Arm閚ien (phon閠ique)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "Serveur Samba"
+msgid "Card model:"
+msgstr "Mod鑜e de carte:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "Serveur de courrier Postfix"
+msgid "Thin Client"
+msgstr "Client l間er"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ftp Server"
-msgstr "Serveur FTP"
+msgid "Start Server"
+msgstr "Lancer le serveur"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr "Solveur de Nom de domaine"
+msgid "Turkmenistan"
+msgstr "Turkm閚istan"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache (serveur www)"
+msgid "All remote machines"
+msgstr "Toutes les machines distantes"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Install themes"
+msgstr "Installation de th鑝es"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"Bienvenue dans l'utilitaire de configuration des alertes par courrier.\n"
-"\n"
-"Vous allez pouvoir configurer ici vos les alertes syst鑝es.\n"
+" modifications 2002 MandrakeSoft par Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "Configuration des alertes par courrier"
+msgid "Espanol"
+msgstr "Espagnol"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "Alerte par courrier"
+msgid "Preparing installation"
+msgstr "Pr閜aration de l'installation"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "s'il vous pla顃 attendez, examen du fichier: %s"
+msgid "Edit selected host/network"
+msgstr "Modifier l'h魌e/r閟eau s閘ectionn"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "Contenu du fichier"
+msgid "Add User -->"
+msgstr "Ajouter un utilisateur -->"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "Calendrier"
+msgid "Nauru"
+msgstr "Nauru"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "Choisir le fichier"
+msgid "True Type fonts installation"
+msgstr "Installation de polices 珷True Type牷"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "mais ne contenant pas"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "D閠ecter automatiquement les imprimantes reli閑s directement au r閟eau"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "contenant"
+msgid "LAN configuration"
+msgstr "Configuration LAN (r閟eau local)"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "Param鑤res"
+msgid "hard disk model"
+msgstr "Mod鑜e de disque dur"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Un outil pour voir vos fichiers journaux"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr ""
+"Vous ne pouvez pas utiliser une partition logique LVM pour le point de "
+"montage %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "chercher"
+msgid "Get Windows Fonts"
+msgstr "R閏up閞er les polices de Windows"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "Explications sur les Outils Mandrake"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "Syslog"
+msgid "Iranian"
+msgstr "Iranien"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "Messages"
+msgid "Croatia"
+msgstr "Croatie"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "Utilisateur"
+msgid "Gateway:"
+msgstr "Passerelle:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/Aide/_A propos..."
+msgid "Add server"
+msgstr "Ajouter un serveur"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Options/Test"
+msgid "Remote printer name"
+msgstr "Nom de l'imprimante"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/Fichier/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
+"MandrakeSoft a cr殚 des outils exclusifs pour cr閑r le plus s閏uris des "
+"Linux ayant jamais exist : DrakSec, un outil permettant de g閞er la "
+"s閏urit, et un solide pare-feu vous permettent de grandement r閐uire les "
+"risques de piratage."
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Fichier/_Enregistrer sous"
+msgid "Device: "
+msgstr "P閞iph閞ique: "
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<Ctrl>-S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Fichier/Enregi_strer"
+msgid "License agreement"
+msgstr "Licence"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<Ctrl>-O"
+msgid "System Options"
+msgstr "Options syst鑝e"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Fichier/_Ouvrir"
+msgid "Please enter the directory where backups are stored"
+msgstr "Veuillez entrer le dossier o r閟ident les sauvegardes"
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<Ctrl>-N"
+msgid "Please choose the desired security level"
+msgstr "Choisissez le niveau de s閏urit d閟ir"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/Fichier/_Nouveau"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Cet h魌e est d閖 dans la liste, il ne peut pas 阾re rajout.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "N'afficher que les pour les jours s閘ectionn閟"
+msgid ", USB printer"
+msgstr ", imprimante USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "蒻uler le troisi鑝e bouton?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Choisissez les applications qui supporteront ces polices"
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Veuillez choisir le type de votre souris."
+msgid "Configure X"
+msgstr "Configuration de X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "Connecter %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turc (mod鑜e traditionnel 珷F牷)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "D閏onnecter %s"
+msgid "Congratulations!"
+msgstr "F閘icitations!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attention, une autre connexion internet a 閠 d閠ect閑, peut-阾re utilisant "
-"votre r閟eau"
+msgid "Use owner id for execution"
+msgstr "Utiliser l'id du propri閠aire lors de l'ex閏ution"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "re鐄s"
+msgid "Down"
+msgstr "descendre"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "transmis"
+msgid "Raw printer (No driver)"
+msgstr "Imprimante acc鑣 direct (pas de pilote)"
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "re鐄s: "
+msgid "Install rpm"
+msgstr "Installation rpm"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "envoy閟: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Pour imprimer un fichier depuis la ligne de commande (une fen阾re de "
+"terminal), vous pouvez soit utiliser la commande 珷%s <fichier>牷 ou un "
+"utilitaire d'impression graphique: 珷xpp <fichier>牷 ou 珷kprinter "
+"<fichier>牷. Les utilitaires graphiques vous permettent de choisir "
+"l'imprimante et de modifier les param鑤res d'impression facilement.\n"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "Mesure locale"
+msgid "Time remaining "
+msgstr "Temps restant "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "moyenne"
+msgid "UK keyboard"
+msgstr "Anglais (Angleterre)"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "Configuration des couleurs"
+msgid "Unmount"
+msgstr "D閙onter"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"La connexion a 閏hou.\n"
-"V閞ifiez votre configuration dans le Centre de Contr鬺e Mandrake."
+msgid "Uninstall Fonts"
+msgstr "D閟installer des polices"
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "Connexion effectu閑."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "D閏onnexion d'Internet effectu閑."
+msgid "German (no dead keys)"
+msgstr "Allemand (sans touches mortes)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "蒫hec de d閏onnexion d'Internet."
+msgid "Transferring %s..."
+msgstr "Transfert de %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "Connexion Internet en cours..."
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mille couleurs (15 bits)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "D閏onnexion d'Internet en cours..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Souhaitez-vous exporter par NFS (protocole Unix) ou SMB (protocole Windows)?"
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Test de votre connexion, veuillez patienter..."
+msgid "Reboot"
+msgstr "Red閙arrage"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "Journaux"
+msgid "Gambia"
+msgstr "Gambie"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "Temps de connexion: "
+msgid "Mandrake Control Center"
+msgstr ""
+"Mandrake Linux 9.1 int鑗re un puissant logiciel de configuration centralis"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "Vitesse de r閏eption:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Vous pouvez entrer divers ports. \n"
+"Exemples valides: 139/tcp 139/udp.\n"
+"Jetez un 絠l /etc/services pour plus d'infos."
-#: ../../standalone/net_monitor:1
+# DO NOT BOTHER TO MODIFY HERE, SEE:
+# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "Vitesse d'閙ission:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Moniteur\n"
+"\n"
+" Le programme d'installation d閠ecte et configure automatiquement les\n"
+"moniteurs connect閟 votre unit centrale. Si ce n'est pas le cas, vous\n"
+"pouvez choisir dans cette liste le moniteur que vous utilisez\n"
+"effectivement."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "Statistiques"
+msgid "\t-Tape \n"
+msgstr "\t-Bande\n"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "Profil "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Aucun navigateur n'est install sur votre syst鑝e. Veuillez en installer un "
+"si vous voulez consulter le syst鑝e d'aide."
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "Surveillance du r閟eau"
+msgid "Remember this password"
+msgstr "Se souvenir du mot de passe"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Lecture des donn閑s des imprimantes install閑s..."
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Le partage de la connexion internet est maintenant activ."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "Nom ou Adresse IP de l'h魌e:"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-celle par transfert SSH.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Cet h魌e est d閖 dans la liste, il ne peut pas 阾re rajout.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"Si l'imprimante voulue a 閠 autod閠ect閑, choisissez la dans la liste et "
+"ajoutez un nom d'utilisateur, un mot de passe et un groupe de travail si "
+"n閏essaire."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "Utiliser l'espace libre sur la partition Windows"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Vous devez entrer un nom d'h魌e ou une adresse IP.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s trouv sur %s. Le configurer燼utomatiquement?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-"Choisissez l'h魌e partir duquel les scanners locaux seront disponibles:"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Partage de scanners locaux"
+"Arguments: (arg)\n"
+"\n"
+"Utilise un mot de passe pour authentifier les utilisateurs."
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This machine"
-msgstr "Cette machine"
+msgid "XFree86 driver: %s\n"
+msgstr "Pilote XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove selected host"
-msgstr "Supprimer l'h魌e s閘ectionn"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Cet h魌e/r閟eau est d閖 dans la liste, il ne peut pas 阾re rajout.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Edit selected host"
-msgstr "Modifier l'h魌e s閘ectionn"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+" Rapport de sauvegarde (DrakBackup) \n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add host"
-msgstr "Ajouter un h魌e"
+msgid "Choose the packages you want to install"
+msgstr "Choisissez les paquetages que vous voulez installer"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-"Voici les machines partir desquelles les scanners locauxseront "
-"disponibles:"
+msgid "Papua New Guinea"
+msgstr "Papouasie-Nouvelle-Guin閑"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "Utilisation des scanners distants"
+msgid "Serbian (cyrillic)"
+msgstr "Serbe (cyrillique)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "All remote machines"
-msgstr "Toutes les machines distantes"
+msgid "Make kernel message quiet by default"
+msgstr "Rendre non bavards les messages noyau"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-"Voici les machines partir desquelles les scanners connect閟 localement "
-"seront disponibles:"
+"D閟irez-vous que l'imprimante 珷%s牷 soit l'imprimante\n"
+"par d閒aut?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Utiliser les scanners sur les h魌es: "
+msgid "The DHCP end range"
+msgstr "La plage DHCP de fin"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Utiliser des scanners sur des ordinateurs distants"
+msgid "Creating bootdisk..."
+msgstr "Cr閍tion de la disquette d'amor鏰ge..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Partage de scanners pour les h魌es: "
+msgid "Wait please, testing your connection..."
+msgstr "Test de votre connexion, veuillez patienter..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Les scanners de cette machine sont utilisables par les autres ordinateurs"
+msgid "Bringing down the network"
+msgstr "Arr阾 de l'interface r閟eau..."
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Vous pouvez aussi d閏ider ici si les scanners des machines distantes seront "
-"rendus disponibles sur cette machine."
+msgid "Login ID"
+msgstr "Identifiant de connexion"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"Vous pouvez ici choisir si les scanners connect閟 cette machine doivent "
-"阾re accessibles depuis des machines distantes, et quelles machines pourront "
-"y acc閐er."
+"Ce service permet le d閙arrage des fonctions de verrouillage des fichiers "
+"pour NFS, lorsque le noyau ne les a pas d閙arr閑s lui-m阭e. Cela dit les "
+"noyaux r閏ents n'en ont pas besoin. Cependant, le service statd est aussi "
+"d閙arr et sert avertir les clients distants de l'arr阾 du serveur NFS."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "R間閚閞ation de la liste des scanners configur閟..."
+msgid "DHCP Client"
+msgstr "Client DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "Recherche de nouveaux scanners..."
+msgid "dismiss"
+msgstr "ne rien faire"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Recherche de scanners configur閟..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Impression/Acquisition sur l'imprimante 珷%s牷"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Scanner sharing"
-msgstr "Partage de scanners"
+msgid "omit raid modules"
+msgstr "ne pas tenir compte des modules RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "Ajouter manuellement un scanner"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"Lpd est le serveur d'impression n閏essaire au bon fonctionnement de la "
+"commande lpr. Il permet g閞er les files d'attente et les demandes "
+"d'impression."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Search for new scanners"
-msgstr "Rechercher des nouveaux scanners"
+msgid "Internet Connection Configuration"
+msgstr "Configuration de la connexion internet"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Aucun scanner trouv disponible sur votre syst鑝e.\n"
+msgid "comma separated numbers"
+msgstr "nombres s閜ar閟 par des virgules"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-"Le scanner suivant:\n"
-"\n"
-"%s\n"
-"est disponible sur votre syst鑝e.\n"
+"Apr鑣 avoir s閘ectionn un p閞iph閞ique, vous pourrez consulter les "
+"informations correspondantes dans la partie droite (珷Information牷)"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Augmenter la priorit de la r鑗le d'un niveau"
#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"The following scanners\n"
+"The following scanner\n"
"\n"
"%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
msgstr ""
-"Les scanners suivants:\n"
+"Le scanner suivant:\n"
"\n"
"%s\n"
-"sont disponibles sur votre syst鑝e.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Votre %s a 閠 configur.\n"
-"Vous pouvez maintenant scanner des documents en utilisant 珷XSane牷 partir "
-"du menu g閚閞al Multim閐ia->Graphisme."
+"est disponible sur votre syst鑝e.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "choisissez le p閞iph閞ique"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "D閟irez-vous vraiment d閟installer l'imprimante 珷%s牷?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Veuillez s閘ectionner le p閞iph閞ique sur lequel %s est branch"
+msgid "I can't find any room for installing"
+msgstr "Pas de place disponible pour l'installation"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "Recherche des scanners..."
+msgid "Default printer"
+msgstr "Imprimante par d閒aut"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto-d閠ecter les ports disponibles"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Vous avez configur plusieurs moyens d'acc鑣 Internet.\n"
+"Choisissez celui que vous voulez utiliser.\n"
+"\n"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(N.B.: les ports parall鑜es ne peuvent 阾re auto-d閠ect閟)"
+msgid "Modify RAID"
+msgstr "Modifier le RAID"
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"%s doit 阾re configur閑 par printerdrake.\n"
-"Vous pouvez lancer printerdrake depuis le Centre de Contr鬺e Mandrake dans "
-"la section Mat閞iel"
+"Une carte RNIS/ISDN a 閠 d閠ect閑 mais son type est inconnu. Veuillez "
+"s閘ectionner une carte PCI dans le prochain 閏ran."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "%s n'est pas support"
+msgid "Add user"
+msgstr "Ajouter un utilisateur"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "%s n'est pas support par cette version de Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "disques RAID %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s n'est pas support par cette version de Mandrake Linux."
+msgid "Liberia"
+msgstr "Lib閞ia"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"Veuillez entrer le nom de l'interface par laquelle vous etes connect "
+"Internet.\n"
+"\n"
+"Exemples:\n"
+"\t\tppp+ pour une connection ADSL ou un modem,\n"
+"\t\teth0 ou eth1 pour connection par cable,\n"
+"\t\tippp+ pour une connection RNIS.\n"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Choix du clavier"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "Mod鑜e d閠ect闋: %s"
+msgid "Format partitions"
+msgstr "Formatage des partitions"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "Correction automatique de la configuration du serveur CUPS"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "S閘ectionnez un mod鑜e de scanner"
+msgid "Running \"%s\" ..."
+msgstr "Lancement de 珷%s牷..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s n'est pas dans la base des scanners, configuration manuelle?"
+msgid "enable radio support"
+msgstr "activer le support de la radio"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s trouv sur %s. Le configurer燼utomatiquement?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "D閠ection du mat閞iel en cours"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "Certains p閞iph閞iques ont 閠 ajout閟:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Partage de scanners pour les h魌es: "
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Certains mat閞iels list閟 dans la classe 珷%s牷 ont 閠 enlev閟:\n"
+msgid "Loopback file name: %s"
+msgstr "Nom du fichier de bouclage: %s"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+msgid "Please choose the printer to which the print jobs should go."
msgstr ""
-"Le succ鑣 de MandrakeSoft est bas sur le logiciel libre. Votre nouveau "
-"syst鑝e d'exploitation est le r閟ultat du travail de la communaut Linux "
-"mondiale."
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Bienvenue dans le monde de l'Open Source."
+"Veuillez choisir l'imprimante sur laquelle seront envoy les travaux "
+"d'impression."
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Merci d'avoir choisi Mandrake Linux 9.1"
+msgid "Do not transfer printers"
+msgstr "Ne pas transf閞er les imprimantes"
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
-"Pour partager vos connaissances et aider la cr閍tion de logiciels Linux, "
-"rejoignez nos forums de discussion sur nos pages 珷community牷."
+msgid "Delay before booting the default image"
+msgstr "D閘ai avant l'activation du choix par d閒aut"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"Vous d閟irez en savoir plus et contribuer la communaut Open Source ? "
-"Impliquez-vous dans le monde Open Source !"
-
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr "Construisez le futur de Linux !"
+"\n"
+" Copyright (C) 2001-2002 par MandrakeSoft \n"
+"\tDUPONT S閎astien (version originale)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+"Ce programme est un logiciel libre: vous pouvez le redistribuer\n"
+"et/ou le modifier selon les termes de la 珷GNU General Public\n"
+"License牷, tels que publi閟 par la 珷Free Software Foundation牷; soit\n"
+"la version 2 de cette licence ou ( votre choix) toute version\n"
+"ult閞ieure.\n"
+"\n"
+"Ce programme est distribu dans l'espoir qu'il sera utile, mais\n"
+"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans m阭e les\n"
+"garanties de commercialisation ou d'adaptation dans un but sp閏ifique.\n"
+"Se r閒閞er la 珷GNU General Public License牷 pour plus de d閠ails.\n"
+"\n"
+"Vous devriez avoir re鐄 une copie de la 珷GNU General Public License牷\n"
+"en m阭e temps que ce programme; sinon, 閏rivez la 珷Free Software\n"
+"Foundation牷, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, "
+"USA. \n"
+" Remerciements:\n"
+" - pfm2afm: \n"
+"\t par Ken Borgendale:\n"
+"\t Conversion d'un fichier .pfm Windows vers un .afm (Adobe Font "
+"Metrics)\n"
+" - type1inst:\n"
+"\t par James Macnicol: \n"
+"\t type1inst g閚鑢e les fichiers fonts.dir, fonts.scale et Fontmap.\n"
+" - ttf2pt1: \n"
+"\t par Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Conversion des fichiers ttf vers afm et pfb\n"
+"\n"
+"\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Et bien s鹯, poussez le multim閐ia ses limites. Utilisez les tous derniers "
-"lecteurs audio et video. Manipulez vos images et photos."
+msgid "Please check for multisession CD"
+msgstr "V閞ifier le CD multisession"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"Consultez des sites Web avec Mozilla ou Konqueror. Lisez votre courrier avec "
-"Evolution ou Kmail. Cr閑z vos documents avec OpenOffice.org."
+msgid "user"
+msgstr "utilisateur"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft a s閘ectionn les meilleurs logiciels pour vous"
+msgid "Use Hard Disk to backup"
+msgstr "Sauvegarde sur disque dur"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-"Mandrake Linux 9.1 est livr閑 avec Mandrake Control Center. Ce puissant "
-"logiciel vous permet d'adapter votre ordinateur vos besoins. Configurez "
-"des 閘閙ents tels que le niveau de s閏urit, vos p閞iph閞iques (閏ran, "
-"souris, clavier...), la connexion Internet et plus encore !"
+msgid "Configure"
+msgstr "Configurer"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Le logiciel de configuration universel de Mandrake"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-"Adaptez votre ordinateur vos besoins gr鈉e aux 11 interfaces utilisateurs "
-"enti鑢ement param閠rables : KDE 3.1, Gnome 2.2, Window Maker, ..."
+"Attention, une autre connexion internet a 閠 d閠ect閑, peut-阾re utilisant "
+"votre r閟eau"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A customizable environment"
-msgstr "Un environnement adapt vos besoins"
+msgid "Backup Users"
+msgstr "Sauvegarder les comptes utilisateurs"
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-"Programmer en utilisant des langages aussi diff閞ents que Perl, Python, C ou "
-"C++ n'a jamais 閠 aussi facile gr鈉e GNU gcc 3 et les meilleurs outils de "
-"d関eloppement Open Source."
-
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 : la plate-forme de d関eloppement id閍le"
+"Veuillez indiquer un nom d'h魌e pour la machine.\n"
+"Celui-ci doit 阾re un nom de machine pleinement qualifi, par exemple:\n"
+"mamachine.monlabo.masociete.com\n"
+"Vous pouvez 間alement indiquer l'adresse IP de la passerelle\n"
+"si votre r閟eau local en poss鑔e une."
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Transformez votre ordinateur en un puissant serveur Linux. Les serveurs Web, "
-"de courrier, pare-feu, routeur, de fichiers et d'impression (etc.) ne sont "
-"qu' quelques clics."
+msgid "Select Printer Spooler"
+msgstr "Choisissez le gestionnaire d'impression"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Transformez votre ordinateur en un serveur fiable"
+msgid "Create new theme"
+msgstr "Cr閑r un nouveau th鑝e"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Notre gamme compl鑤e de solutions Linux ainsi que des offres sp閏iales sur "
-"des produits et accessoires sont disponibles sur notre boutique en ligne :"
+msgid "Mandrake Tools Explanation"
+msgstr "Explications sur les Outils Mandrake"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "La boutique officielle Mandrake"
+msgid "No image found"
+msgstr "Aucune image trouv閑"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-"Am閘iorez les performances de votre ordinateur gr鈉e l'aide d'une "
-"s閘ection de partenaires offrant des solutions professionnelles compatibles "
-"avec Mandrake Linux"
+"Quelques paquetages importants n'ont pas 閠 correctement install閟. Il se\n"
+"peut que le lecteur de CD-Rom ou le CD-Rom lui-m阭e soit d閒ectueux. Vous\n"
+"pouvez vous assurer du bon 閠at de ce dernier en ex閏utant la commande "
+"suivante\n"
+"sur un ordinateur fonctionnant correctement: 珷rpm -qpl Mandrake/RPMS/*."
+"rpm牷\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
-"Obtenez le meilleur avec les partenaires strat間iques de Mandrake Linux"
+msgid "Detected model: %s"
+msgstr "Mod鑜e d閠ect闋: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-"MandrakeSoft a cr殚 des outils exclusifs pour cr閑r le plus s閏uris des "
-"Linux ayant jamais exist : DrakSec, un outil permettant de g閞er la "
-"s閏urit, et un solide pare-feu vous permettent de grandement r閐uire les "
-"risques de piratage."
+"Le gestionnaire de connexion vous permet d'ouvrir une session graphique\n"
+"sur votre syst鑝e gr鈉e au serveur d'affichage XFree, et permet le "
+"fonctionnement\n"
+"de plusieurs sessions XFree en m阭e temps sur la m阭e machine."
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Optimisez votre s閏urit en utilisant Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
+msgstr "Si oui, effectue les v閞ifications quotidiennes de s閏urit."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Ce produit est disponible sur notre boutique en ligne."
+msgid "Azerbaijan"
+msgstr "Azerba飀jan"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
-"Optimisez votre s閏urit avec ce logiciel tr鑣 facile utiliser combinant "
-"des 閘閙ents de haute performance : un pare-feu, un serveur et un client "
-"pour r閟eau priv virtuel (VPN), un syst鑝e de d閠ection d'intrusion et un "
-"gestionnaire de trafic."
+msgid "No tape in %s!"
+msgstr "Pas de bande dans %s!"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "S閏urisez vos r閟eaux avec le Multi Newtwork Firewall"
+msgid "Dvorak (US)"
+msgstr "Dvorak am閞icain"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-"Rejoignez les 閝uipes de support de MandrakeSoft et la communaut Linux. "
-"Partagez vos connaissances et aidez les autres en devenant un Expert reconnu "
-"sur le site Web de support technique :"
+"ceci est le bus physique sur lequel le p閞iph閞ique est connect (ex: PCI, "
+"USB, ...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "R閟olvez vos probl鑝es via notre plate-forme de support en ligne."
+msgid "How is the printer connected?"
+msgstr "Quel est le type de connexion de l'imprimante?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Devenez un Expert Mandrake"
+msgid "Security level"
+msgstr "Niveau de s閏urit"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
-"Tous les incidents sont suivis par un interlocuteur unique et qualifi."
+msgid "final resolution"
+msgstr "r閟olution finale"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "Une plate-forme en ligne pour r閜ondre aux besoins des entreprises."
+msgid "Services"
+msgstr "Services"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Corporate"
+msgid "4 MB"
+msgstr "4 Mo"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -19873,10 +19899,6 @@ msgstr ""
"tableurs (kspread, gnumeric), visualiseur pdf, etc"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Station de travail"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Jeux"
@@ -19950,10 +19972,6 @@ msgstr ""
"collection d'outils"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Environnement graphique"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Station de travail Gnome"
@@ -19974,10 +19992,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "D関eloppement"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr ""
"Biblioth鑡ues de d関eloppement C et C++, programmes et fichiers d'en-t阾e"
@@ -20048,826 +20062,73 @@ msgstr "Serveur NFS, serveur SMB, serveur Proxy (mandataire), serveur SSH"
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Multim閐ia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Programmes pour jouer/閐iter du son et de la vid閛"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Video station"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Video playing programs"
-msgstr "Programmes pour jouer/閐iter du son et de la vid閛"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Graphic station"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Graphics programs"
-msgstr "Programmes de graphisme comme Le Gimp"
-
-#: ../../share/compssUsers:999
-#, fuzzy
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr ""
"Ensemble d'outils pour lire ou envoyer des courriers 閘ectronique (pine, "
"mutt), des messages de forums (tin), et pour naviguer sur Internet"
-#~ msgid "Printer sharing"
-#~ msgstr "Partage d'imprimante"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Connexion internet et configuration"
-#~ msgid ""
-#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
-#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
-#~ "raster format for the data sent to the printer. The driver for these "
-#~ "printers is still in a very early development stage and so it will "
-#~ "perhaps not always work properly. Especially it is possible that the "
-#~ "printer only works when you choose the A4 paper size.\n"
-#~ "\n"
-#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
-#~ "was originally created, need their firmware to be uploaded to them after "
-#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
-#~ "search the printer's Windows driver CD or your Windows partition for the "
-#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
-#~ "following commands:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "The first command can be given by any normal user, the second must be "
-#~ "given as root. After having done so you can print normally.\n"
-#~ msgstr ""
-#~ "Votre imprimante appartient au groupe d'imprimantes laser GDI (destin閑s "
-#~ " MS-Windows) vendues par diff閞ents fabricants et qui utilisent le "
-#~ "format de trames Zenographics ZJ-stream pour les donn閑s envoy閑s "
-#~ "l'imprimante. Le pilote pour ces imprimantes est encore en processus de "
-#~ "d関eloppement et pourrait ne pas fonctionner de mani鑢e optimale. En "
-#~ "particulier, un format autre que A4 pour le papier peut s'av閞er "
-#~ "probl閙atique.\n"
-#~ "\n"
-#~ "Certaines de ces imprimantes, comme la HP LaserJet 1000, pour lequel ce "
-#~ "pilote a 閠 閏rit l'origine, ont besoin l'allumage d'avoir leur "
-#~ "micro-code t閘閏harg en m閙oire. Dans le cas de la HP LaserJet 1000 vous "
-#~ "cherchez le fichier 珷sihp1000.img牷 sur le CD fourni avec l'imprimante "
-#~ "ou dans votre partition Windows et envoyez ce fichier dans la m閙oire de "
-#~ "l'imprimante avec l'une des commandes suivantes:\n"
-#~ "\n"
-#~ " lpr -o raw sihp1000.img\n"
-#~ " cat sihp1000.img > /dev/usb/lp0\n"
-#~ "\n"
-#~ "La premi鑢e commande peut 阾re lanc閑 par un utilisateur normal, la "
-#~ "seconde ne peut 阾re lanc閑 que par root. Apr鑣 cela vous pourrez "
-#~ "imprimer normalement.\n"
-
-#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
-#~ msgstr "Imprimante Laser GDI avec le format Zenographics ZJ-Stream"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid "Office"
-#~ msgstr "Bureautique"
-
-#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
-#~ msgstr ""
-#~ "Utilitaires pour le courrier 閘ectronique, les forums, le web, le "
-#~ "transfert de fichiers, les discussions en ligne"
-
-#~ msgid "Games"
-#~ msgstr "Jeux"
-
-#~ msgid "Multimedia - Graphics"
-#~ msgstr "Multim閐ia - Graphisme"
-
-#~ msgid "Multimedia - Sound"
-#~ msgstr "Multim閐ia - Son"
-
-#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-#~ msgstr "Outils audio: lecteurs mp3 ou midi, mixeurs, etc"
+#~ msgid "Configure the connection"
+#~ msgstr "Configurez la connexion"
-#~ msgid "Multimedia - Video"
-#~ msgstr "Multim閐ia - Vid閛"
+#~ msgid "Disconnect"
+#~ msgstr "Se d閏onnecter"
-#~ msgid "Video players and editors"
-#~ msgstr "Lecteurs et 閐iteurs vid閛"
-
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multim閐ia - Gravure de CD"
-
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "Outils pour cr閑r et graver des CD"
-
-#~ msgid "More Graphical Desktops (Gnome, IceWM)"
-#~ msgstr "Plus d'Environnements de Bureau (Gnome, IceWM)"
-
-#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-#~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#~ msgid "Personal Information Management"
-#~ msgstr "Gestionnaire d'Informations Personnelles"
-
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "Outils pour votre Palm Pilot ou votre Visor"
-
-#~ msgid "Personal Finance"
-#~ msgstr "Gestion Financi鑢e"
-
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "Programmes pour g閞er votre finance, comme gnucash"
-
-#~ msgid "no network card found"
-#~ msgstr "Aucune carte r閟eau n'a 閠 identifi閑"
+#~ msgid "Connect"
+#~ msgstr "Connecter"
#~ msgid ""
-#~ "Mandrake Linux 9.1 has selected the best software for you. Surf the Web "
-#~ "and view animations with Mozilla and Konqueror, or read your mail and "
-#~ "handle your personal information with Evolution and Kmail"
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 vous fournit les meilleures applications du moment. "
-#~ "Vous pourrez parcourir le Web et visualiser des animations via Mozilla ou "
-#~ "Konqueror, lire vos courriels et g閞er vos informations personnelles avec "
-#~ "Evolution ou Kmail"
-
-#~ msgid "Get the most from the Internet"
-#~ msgstr "Tirez le meilleur parti de votre messagerie et d'Internet!"
-
-#~ msgid "Push multimedia to its limits!"
-#~ msgstr "Poussez le multim閐ia ses limites!"
-
-#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
-#~ msgstr ""
-#~ "Gr鈉e Mandrake Linux 9.1, profitez au maximum des capacit閟 multim閐ia "
-#~ "de votre ordinateur."
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
-#~ "strategy, ..."
-#~ msgstr ""
-#~ "Mandrake Linux 9.1 vous fournit les meilleurs jeux Open Source en arcade, "
-#~ "action, r閒lexion, strat間ie, ..."
-
-#~ msgid ""
-#~ "Mandrake Linux 9.1 provides a powerful tool to fully customize and "
-#~ "configure your machine"
-#~ msgstr ""
-#~ "Vous pourrez contr鬺er enti鑢ement vos p閞iph閞iques et administrer votre "
-#~ "machine"
-
-#~ msgid "User interfaces"
-#~ msgstr "Personnalisez vos environnements de travail!"
-
-#~ msgid ""
-#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
-#~ "Source development environments"
-#~ msgstr ""
-#~ "Vous b閚閒iciez de la puissance du compilateur GNU GCC 3 ainsi que des "
-#~ "meilleurs environnements Open Source"
-
-#~ msgid "Development simplified"
-#~ msgstr "Simplifiez vos d関eloppements!"
-
-#~ msgid ""
-#~ "This firewall product includes network features that allow you to fulfill "
-#~ "all your security needs"
-#~ msgstr ""
-#~ "Bien plus qu'un firewall, ce produit polyvalent r閜ondra tous vos "
-#~ "besoins de s閏urit"
-
-#~ msgid ""
-#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
-#~ "N.F.)"
-#~ msgstr ""
-#~ "La gamme de produit MandrakeSecurity comprend entre autres le Multi "
-#~ "Network Firewall (M.N.F.)"
-
-#~ msgid "Strategic partners"
-#~ msgstr "Les partenaires strat間iques de MandrakeSoft"
-
-#~ msgid ""
-#~ "Whether you choose to teach yourself online or via our network of "
-#~ "training partners, the Linux-Campus catalogue prepares you for the "
-#~ "acknowledged LPI certification program (worldwide professional technical "
-#~ "certification)"
-#~ msgstr ""
-#~ "Que vous choisissiez de vous former vous-m阭e via la plate-forme de "
-#~ "formation en ligne MandrakeCampus ou via notre r閟eau de partenaires, le "
-#~ "catalogue Linux-Campus vous pr閜arera la certification L.P.I. (珷Linux "
-#~ "Professional Institute牷) reconnue professionnellement"
-
-#~ msgid "Certify yourself on Linux"
-#~ msgstr "Devenez ing閚ieur certifi Linux"
-
-#~ msgid ""
-#~ "The training program has been created to respond to the needs of both end "
-#~ "users and experts (Network and System administrators)"
-#~ msgstr ""
-#~ "Linux-Campus est le programme de formation 閘abor par MandrakeSoft pour "
-#~ "r閜ondre la fois aux besoins des utilisateurs finaux et ceux des "
-#~ "experts (administrateurs r閟eaux et syst鑝es)"
-
-#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
-#~ msgstr ""
-#~ "D閏ouvrez le catalogue de formation Linux-Campus et devenez Expert sous "
-#~ "Linux!"
-
-#~ msgid ""
-#~ "MandrakeClub and Mandrake Corporate Club were created for business and "
-#~ "private users of Mandrake Linux who would like to directly support their "
-#~ "favorite Linux distribution while also receiving special privileges. If "
-#~ "you enjoy our products, if your company benefits from our products to "
-#~ "gain a competititve edge, if you want to support Mandrake Linux "
-#~ "development, join MandrakeClub!"
-#~ msgstr ""
-#~ "MandrakeClub et Mandrake Corporate Club ont 閠 cr殚s pour les "
-#~ "entreprises et les utilisateurs de Mandrake Linux qui souhaitent soutenir "
-#~ "directement leur distribution Linux pr閒閞閑 tout en b閚閒iciant de "
-#~ "privil鑗es sp閏iaux. Si vous aimez nos produits, si votre soci閠 utilise "
-#~ "nos produits pour gagner en comp閠itivit, si vous voulez soutenir le "
-#~ "d関eloppement de Mandrake Linux, rejoignez MandrakeClub!"
-
-#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
-#~ msgstr "D閏ouvrez MandrakeClub et Mandrake Corporate Club"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of various information it has\n"
-#~ "about your system. Depending on your installed hardware, you may have "
-#~ "some\n"
-#~ "or all of the following entries:\n"
-#~ "\n"
-#~ " * \"Mouse\": check the current mouse configuration and click on the "
-#~ "button\n"
-#~ "to change it if necessary.\n"
#~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
-#~ "the button to change that if necessary.\n"
-#~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
-#~ "country, click on the button and choose another one.\n"
-#~ "\n"
-#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-#~ "primary language you have chosen. But here, just as in your choice of a\n"
-#~ "keyboard, you may not be in a country to which the chosen language\n"
-#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
-#~ "configure the clock for the correct timezone.\n"
-#~ "\n"
-#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
-#~ "printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
-#~ "\n"
-#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-#~ "click that button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-#~ "interface in \"800x600\" resolution. If that does not suits you, click "
-#~ "on\n"
-#~ "the button to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"Network\": If you want to configure your Internet or local network\n"
-#~ "access now, you can by clicking on this button.\n"
-#~ "\n"
-#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
-#~ "displayed here. If you notice the sound card displayed is not the one "
-#~ "that\n"
-#~ "is actually present on your system, you can click on the button and "
-#~ "choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-#~ "here. If you have a TV card and it is not detected, click on the button "
-#~ "to\n"
-#~ "try to configure it manually.\n"
-#~ "\n"
-#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-#~ "displayed here. You can click on the button to change the parameters\n"
-#~ "associated with the card."
+#~ "You can reconfigure your connection."
#~ msgstr ""
-#~ "On vous pr閟ente ici les diff閞ents param鑤res de votre syst鑝e. Selon "
-#~ "le\n"
-#~ "mat閞iel install, certaines entr閑s seront pr閟entes et d'autres pas.\n"
-#~ "\n"
-#~ " * 珷Souris牷: pour v閞ifier la configuration actuelle de la souris.\n"
-#~ "Cliquez sur le bouton pour modifier les options.\n"
-#~ "\n"
-#~ " * 珷Clavier牷: v閞ifie la configuration choisie pour le clavier. "
-#~ "Cliquez\n"
-#~ "sur le bouton pour la modifier.\n"
-#~ "\n"
-#~ " * 珷Fuseau horaire牷: DrakX, par d閒aut, essaie de trouver le fuseau\n"
-#~ "horaire dans lequel vous 阾es. Encore une fois, il est possible que vous "
-#~ "ne\n"
-#~ "soyez pas dans le fuseau horaire qui vous convient. Donc, vous aurez\n"
-#~ "peut-阾re cliquer sur le bouton 珷fuseau horaire牷 pour identifier\n"
-#~ "pr閏is閙ent l'heure qui doit appara顃re dans vos horloges.\n"
#~ "\n"
-#~ " * 珷Imprimante牷: en cliquant sur 珷Pas d'imprimante牷, l'outil de\n"
-#~ "configuration sera d閙arr.\n"
-#~ "\n"
-#~ " * 珷Carte son牷: si une carte son a 閠 d閠ect閑, elle appara顃ra ici.\n"
-#~ "Aucune modification n'est possible cette 閠ape.\n"
-#~ "\n"
-#~ " * 珷Carte TV牷: si une carte d'entr閑/sortie vid閛 (carte TV) a 閠閈n"
-#~ "d閠ect閑, elle appara顃ra ici. Aucune modification possible cette "
-#~ "閠ape.\n"
-#~ "\n"
-#~ " * 珷Carte ISDN牷: si une carte ISDN est d閠ect閑, elle appara顃ra ici.\n"
-#~ "Vous pouvez cliquer sur le bouton pour en modifier les param鑤res."
+#~ "Vous pouvez reconfigurer votre connexion."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#, fuzzy
#~ msgid ""
-#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a grub/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or "
-#~ "another\n"
-#~ "OS.\n"
-#~ "\n"
-#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader.\n"
-#~ "\n"
-#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
-#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
-#~ "disk\n"
-#~ "(\"On Floppy\").\n"
-#~ "\n"
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
-#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
-#~ "Le CDROM d'installation de Mandrake Linux a un mode de r閏up閞ation\n"
-#~ "pr閐閒ini. Vous pouvez y acc閐er en d閙arrant l'ordinateur sur le CDROM.\n"
-#~ "Selon la version de votre 珷BIOS牷, il faut lui sp閏ifier de d閙arrer "
-#~ "sur\n"
-#~ "le CDROM. Vous devriez revenir au disquette de d閙arrage dans deux cas\n"
-#~ "pr閏is:\n"
-#~ "\n"
-#~ " * Au moment d'installer le 珷Programme d'amorce牷, DrakX va r殚crire "
-#~ "sur\n"
-#~ "le secteur (MBR) contenant le programme d'amorce (boot loader) afin de "
-#~ "vous\n"
-#~ "permettre de d閙arrer avec Linux ou Windows (en prenant pour acquis que\n"
-#~ "vous avez deux syst鑝es d'exploitation install閟. Si vous r閕nstallez\n"
-#~ "Windows, celui-ci va r殚crire sur le MBR et il vous sera d閟ormais\n"
-#~ "impossible de d閙arrer Linux.\n"
#~ "\n"
-#~ " * Si un probl鑝e survient et qu'il vous est impossible de d閙arrer\n"
-#~ "GNU/Linux partir du disque dur, cette disquette deviendra votre seul\n"
-#~ "moyen de d閙arrer votre syst鑝e Linux. Elle contient un bon nombre "
-#~ "d'outils\n"
-#~ "pour r閏up閞er un syst鑝e d閒ectueux, peu importe la source du probl鑝e.\n"
-#~ "\n"
-#~ "En cliquant sur cette 閠ape, on vous demandera d'ins閞er une disquette. "
-#~ "La\n"
-#~ "disquette ins閞閑 sera compl鑤ement effac閑 et DrakX se chargera de la\n"
-#~ "formater et d'y ins閞er les fichiers n閏essaires."
+#~ "Vous pouvez vous connecter Internet ou reconfigurer votre connexion."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Vous n'阾es actuellement pas connect Internet."
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#, fuzzy
#~ msgid ""
-#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
-#~ "handy.\n"
#~ "\n"
-#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
-#~ "by\n"
-#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
-#~ ">>rescue<<\n"
-#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
-#~ "at\n"
-#~ "least two situations where having a boot floppy is critical:\n"
-#~ "\n"
-#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
-#~ "(MBR)\n"
-#~ "of your main disk (unless you are using another boot manager), to allow "
-#~ "you\n"
-#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
-#~ "on\n"
-#~ "your system). If at some point you need to reinstall Windows, the "
-#~ "Microsoft\n"
-#~ "install process will rewrite the boot sector and remove your ability to\n"
-#~ "start GNU/Linux!\n"
-#~ "\n"
-#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
-#~ "disk,\n"
-#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
-#~ "a\n"
-#~ "fair number of system tools for restoring a system that has crashed due "
-#~ "to\n"
-#~ "a power failure, an unfortunate typing error, a forgotten root password, "
-#~ "or\n"
-#~ "any other reason.\n"
-#~ "\n"
-#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
-#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
-#~ "format the floppy and will rewrite the whole disk."
+#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
-#~ "Le CDROM d'installation de Mandrake Linux a un mode de r閏up閞ation\n"
-#~ "pr閐閒ini. Vous pouvez y acc閐er en d閙arrant l'ordinateur sur le CDROM.\n"
-#~ "Selon la version de votre 珷BIOS牷, il faut lui sp閏ifier de d閙arrer "
-#~ "sur\n"
-#~ "le CDROM. Vous devriez revenir au disquette de d閙arrage dans deux cas\n"
-#~ "pr閏is:\n"
#~ "\n"
-#~ " * Au moment d'installer le 珷Programme d'amorce牷, DrakX va r殚crire "
-#~ "sur\n"
-#~ "le secteur (MBR) contenant le programme d'amorce (boot loader) afin de "
-#~ "vous\n"
-#~ "permettre de d閙arrer avec Linux ou Windows (en prenant pour acquis que\n"
-#~ "vous avez deux syst鑝es d'exploitation install閟. Si vous r閕nstallez\n"
-#~ "Windows, celui-ci va r殚crire sur le MBR et il vous sera d閟ormais\n"
-#~ "impossible de d閙arrer Linux.\n"
-#~ "\n"
-#~ " * Si un probl鑝e survient et qu'il vous est impossible de d閙arrer\n"
-#~ "GNU/Linux partir du disque dur, cette disquette deviendra votre seul\n"
-#~ "moyen de d閙arrer votre syst鑝e Linux. Elle contient un bon nombre "
-#~ "d'outils\n"
-#~ "pour r閏up閞er un syst鑝e d閒ectueux, peu importe la source du probl鑝e.\n"
-#~ "\n"
-#~ "En cliquant sur cette 閠ape, on vous demandera d'ins閞er une disquette. "
-#~ "La\n"
-#~ "disquette ins閞閑 sera compl鑤ement effac閑 et DrakX se chargera de la\n"
-#~ "formater et d'y ins閞er les fichiers n閏essaires."
+#~ "Vous pouvez vous d閏onnecter ou reconfigurer votre connexion."
-#~ msgid ""
-#~ "The following printers are configured. Double-click on a printer to "
-#~ "change its settings; to make it the default printer; to view information "
-#~ "about it; or to make a printer on a remote CUPS server available for Star "
-#~ "Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Les imprimantes suivantes sont configur閑s. Double-cliquez sur l'une "
-#~ "d'entre elles pour modifier ses param鑤res, en faire l'imprimante par "
-#~ "d閒aut, consulter les informations son propos ou pour rendre une "
-#~ "imprimante d'un serveur CUPS distant utilisable par Star Office/"
-#~ "OpenOffice.org/GIMP."
-
-#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "Veuillez indiquer le nom d'h魌e de votre machine si vous le connaissez.\n"
-#~ "Certains serveurs DHCP ont besoin de ce nom d'h魌e pour fonctionner.\n"
-#~ "Celui-ci doit 阾re pleinement qualifi, comme par exemple:\n"
-#~ "mamachine.monlabo.masociete.com"
-
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "Erreur DrakFloppy: %s"
-
-#~ msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-#~ msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "D閙arrage enti鑢ement graphique (Aurora)"
-
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Moniteur traditionnel Gtk+"
-
-#~ msgid "Traditional Monitor"
-#~ msgstr "Moniteur traditionnel"
-
-#~ msgid "NewStyle Monitor"
-#~ msgstr "Moniteur nouveau style"
-
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "Moniteur nouveau style avec cat間orisation"
-
-#~ msgid "Secure Connection"
-#~ msgstr "par connexion s閏uris閑..."
-
-#~ msgid "FTP Connection"
-#~ msgstr "par connexion FTP..."
-
-#~ msgid "Mail/Groupware/News"
-#~ msgstr "Courriels/Collecticiels/Forums"
-
-#~ msgid "Postfix mail server, Inn news server"
-#~ msgstr "Serveur de courrier Postfix, serveur de forums Inn"
-
-#~ msgid "/Options"
-#~ msgstr "/Options"
-
-#~ msgid "/Autodetect jazz drives"
-#~ msgstr "/Auto-d閠ecter les p閞iph閞iques Jazz"
-
-#~ msgid "/Autodetect modems"
-#~ msgstr "/Auto-d閠ecter les modems"
-
-#~ msgid "/Autodetect printers"
-#~ msgstr "/Auto-d閠ecter les imprimantes"
-
-#~ msgid ""
-#~ "The partition you've selected to add as root (/) is physically located "
-#~ "beyond\n"
-#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
-#~ "partition"
-#~ msgstr ""
-#~ "Attention, votre partition racine se situe au del du 1024鑝e cylindre.\n"
-#~ "Si vous comptez utiliser le programme d'amor鏰ge LILO, vous devez cr閑r\n"
-#~ "une autre partition juste pour le r閜ertoire /boot en de玎 du 1024鑝e "
-#~ "cylindre."
-
-#~ msgid ""
-#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
-#~ "> 1024).\n"
-#~ "Either you use LILO and it won't work, or you don't use LILO and you "
-#~ "don't need /boot"
-#~ msgstr ""
-#~ "Le programme d'amor鏰ge LILO ne peut pas fonctionner si vous placez\n"
-#~ "la partition du r閜ertoire /boot aussi loin sur le disque (c'est--dire\n"
-#~ "au del du 1024鑝e cylindre). Si vous n'utilisez pas LILO, vous n'avez\n"
-#~ "pas besoin de partition sp閏ifique pour le r閜ertoire /boot."
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Vous 阾es actuellement connect Internet."
-#~ msgid "Upgrade"
-#~ msgstr "Mise jour"
+#~ msgid "files sending by FTP"
+#~ msgstr "Envoi par FTP"
-#~ msgid "192.168.100.0/255.255.255.0\n"
-#~ msgstr "192.168.100.0/255.255.255.0\n"
+#~ msgid "Use incremental backup (do not replace old backups)"
+#~ msgstr "Sauvegardes incr閙entales (閏onomie d'espace)"
-#~ msgid "192.168.100.0/24\n"
-#~ msgstr "192.168.100.0/24\n"
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Relancez 珷lilo牷"
-#~ msgid "10.1.*\n"
-#~ msgstr "10.1.*\n"
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "construisez le RAMdisk avec 'mkinitrd -f /boot/initrd-%s.img %s'."
-#~ msgid "10.0.0.*\n"
-#~ msgstr "10.0.0.*\n"
+#~ msgid "Write %s"
+#~ msgstr "蒫riture de %s"
-#~ msgid "192.168.100.194\n"
-#~ msgstr "192.168.100.194\n"
-
-#~ msgid "Do you want to configure another printer?"
-#~ msgstr "D閟irez-vous configurer une autre imprimante?"
-
-#~ msgid "Know how to use this printer"
-#~ msgstr "Savoir comment utiliser cette imprimante"
-
-#~ msgid "Preparing Printerdrake..."
-#~ msgstr "Pr閜aration de PrinterDrake..."
-
-#~ msgid "Reading printer data ..."
-#~ msgstr "Lecture des donn閑s de l'imprimante..."
-
-#~ msgid ""
-#~ "You must indicate where you wish to place the information required to "
-#~ "boot\n"
-#~ "GNU/Linux.\n"
-#~ "\n"
-#~ "Unless you know exactly what you are doing, choose \"First sector of "
-#~ "drive\n"
-#~ "(MBR)\"."
-#~ msgstr ""
-#~ "Vous devez maintenant choisir o placer le programme d'amor鏰ge, LILO ou "
-#~ "Grub,\n"
-#~ "n閏essaire au d閙arrage de GNU/Linux.\n"
-#~ "\n"
-#~ " moins de savoir exactement ce que vous faites, choisissez\n"
-#~ "toujours 珷Premier secteur du disque (MBR)牷."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#~ msgid ""
-#~ "DrakX now needs to know if you want to perform a default (\"Recommended"
-#~ "\")\n"
-#~ "installation or if you want to have greater control (\"Expert\") over "
-#~ "your\n"
-#~ "installation. You can also choose to do a new installation or upgrade "
-#~ "your\n"
-#~ "existing Mandrake Linux system:\n"
-#~ "\n"
-#~ " * \"Install\": completely wipes out the old system. However, depending "
-#~ "on\n"
-#~ "what is currently installed on your machine, you may be able to keep "
-#~ "some\n"
-#~ "old partitions (Linux or otherwise) unchanged;\n"
-#~ "\n"
-#~ " * \"Upgrade\": this installation class allows to simply update the\n"
-#~ "packages currently installed on your Mandrake Linux system. It keeps "
-#~ "your\n"
-#~ "hard drives' current partitions as well as user configurations. All "
-#~ "other\n"
-#~ "configuration steps remain available, similar to a normal installation;\n"
-#~ "\n"
-#~ " * \"Upgrade Packages Only\": this new installation class allows you to\n"
-#~ "upgrade an existing Mandrake Linux system while keeping all system\n"
-#~ "configurations unchanged. Adding new packages to the current "
-#~ "installation\n"
-#~ "is also possible.\n"
-#~ "\n"
-#~ "Upgrades should work fine on Mandrake Linux systems using version \"8.1"
-#~ "\"\n"
-#~ "or later.\n"
-#~ "\n"
-#~ "Depending on your GNU/Linux knowledge, select one of the following "
-#~ "choices:\n"
-#~ "\n"
-#~ " * Recommended: choose this if you have never installed a GNU/Linux\n"
-#~ "operating system. The installation will be very easy and you will only "
-#~ "be\n"
-#~ "asked a few questions;\n"
-#~ "\n"
-#~ " * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
-#~ "perform a highly customized installation. Some of the decisions you will\n"
-#~ "have to make may be difficult if you do not have good GNU/Linux "
-#~ "knowledge,\n"
-#~ "so it is not recommended that those without a fair amount of experience\n"
-#~ "select this installation class."
-#~ msgstr ""
-#~ "DrakX doit maintenant savoir quel type d'installation vous d閟irez\n"
-#~ "r閍liser. Deux types d'installations sont propos閟: Par d閒aut (珷\n"
-#~ "Recommand閑牷), qui limite le nombre de questions l'utilisateur au\n"
-#~ "minimum ou 珷Expert牷 qui vous permet de s閘ectionner individuellement\n"
-#~ "chacune des composantes installer. 蒰alement, on vous propose de faire\n"
-#~ "une 珷Installation牷 ou une 珷Mise jour牷 d'un syst鑝e Mandrake Linux\n"
-#~ "existant:\n"
-#~ "\n"
-#~ " * 珷Installation牷: balaye l'ancien syst鑝e. En fait, selon ce que "
-#~ "votre\n"
-#~ "machine comporte, vous pourrez garder intacte certaines des anciennes\n"
-#~ "partition (Linux ou autres) ;\n"
-#~ "\n"
-#~ " * 珷Mise jour牷: cette classe d'installation permet de simplement\n"
-#~ "mettre jours les paquetages qui composent votre syst鑝e Mandrake "
-#~ "Linux.\n"
-#~ "Elle conserve les partitions existantes, ainsi que la configuration des\n"
-#~ "utilisateurs. Toutes les autres 閠apes de l'installation sont "
-#~ "accessibles\n"
-#~ "en comparaison avec une installation classique ;\n"
-#~ "\n"
-#~ " * 珷Mise jour des paquetages uniquement牷: Cette nouvelle classe\n"
-#~ "d'installation permet de mettre jour un syst鑝e Mandrake Linux "
-#~ "existant,\n"
-#~ "tout en gardant sa configuration inchang閑. L'ajout de nouveaux "
-#~ "paquetages\n"
-#~ "durant la mise jour est cependant possible.\n"
-#~ "\n"
-#~ "La mise jour devrait fonctionner correctement pour les syst鑝e "
-#~ "Mandrake\n"
-#~ "Linux partir de la version 珷8.1牷.\n"
-#~ "\n"
-#~ "Selon votre niveau d'expertise avec les syst鑝es d'exploitations GNU/"
-#~ "Linux,\n"
-#~ "il faut choisir l'un des deux types d'installations suivants:\n"
-#~ "\n"
-#~ " * 珷Recommand閑牷: choisissez cette option si vous n'avez jamais "
-#~ "install閈n"
-#~ "de syst鑝e d'exploitation GNU/Linux. C'est la m閠hode la plus facile, la\n"
-#~ "plupart des choix ont d閖 閠 fait pour vous.\n"
-#~ "\n"
-#~ " * Expert: si vous avez une bonne connaissance de GNU/Linux, vous pouvez\n"
-#~ "choisir ce type d'installation. Cette m閠hode vous permettra de\n"
-#~ "personnaliser l'ensemble des composantes de votre syst鑝e. Ces questions\n"
-#~ "peuvent s'av閞er complexes, particuli鑢ement en mati鑢e de "
-#~ "partitionnement\n"
-#~ "et du choix des paquetages install閟. En cons閝uence, il n'est pas\n"
-#~ "recommand de s'y aventurer sans de bonnes connaissances au pr閍lable.\n"
-#~ "\n"
-#~ "Le pr閟ent manuel s'efforce de documenter l'ensemble des classes "
-#~ "propos閑s\n"
-#~ "dans le mode 珷Expert牷. Si vous avez choisi le mode 珷Recommand閑牷,\n"
-#~ "ignorez simplement les 閠apes identifi閑s seulement au mode 珷Expert牷."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#~ msgid "Please be patient. This operation can take several minutes."
-#~ msgstr "Veuillez patienter. Cette op閞ation peut prendre plusieurs minutes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#~ msgid ""
-#~ "Your new Mandrake Linux operating system is currently being installed.\n"
-#~ "Depending on the number of packages you will be installing and the speed "
-#~ "of\n"
-#~ "your computer, this operation could take from a few minutes to a\n"
-#~ "significant amount of time.\n"
-#~ "\n"
-#~ "Please be patient."
-#~ msgstr ""
-#~ "Votre nouvelle distribution Mandrake Linux est en cours d'installation.\n"
-#~ "Selon la quantit de paquetages installer et la vitesse de votre "
-#~ "ordinateur,\n"
-#~ "la dur閑 de cette op閞ation peut varier de quelques instants plusieurs "
-#~ "minutes.\n"
-#~ "\n"
-#~ "Veuillez patienter."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/fr/drakx-chapter.xml
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
-#~ "\n"
-#~ "You will be presented the list of available resolutions and color depth\n"
-#~ "available for your hardware. Choose the one that best suit your needs "
-#~ "(you\n"
-#~ "will be able to change that after installation though). When you are\n"
-#~ "satisfied with the sample shown in the monitor, click \"OK\". A window "
-#~ "will\n"
-#~ "then appear and ask you if you can see it.\n"
-#~ "\n"
-#~ "If you are doing an \"Expert\" installation, you will enter the X\n"
-#~ "configuration wizard. See the corresponding section of the manual for "
-#~ "more\n"
-#~ "information about this wizard.\n"
-#~ "\n"
-#~ "If you can see the message during the test, and answer \"Yes\", then "
-#~ "DrakX\n"
-#~ "will proceed to the next step. If you cannot see the message, it simply\n"
-#~ "means that the configuration was wrong and the test will automatically "
-#~ "end\n"
-#~ "after 10 seconds, restoring the screen. Refer then to the video\n"
-#~ "configuration section of the user guide for more information on how to\n"
-#~ "configure your display."
-#~ msgstr ""
-#~ "X (pour le X Window system) est le coeur de votre interface graphique "
-#~ "sous\n"
-#~ "GNU/Linux. Tous les environnements graphiques (Gnome, KDE, "
-#~ "Afterstep, ...)\n"
-#~ "pr閟ents sur Mandrake Linux d閜endent de X. A cette 閠ape, DrakX, va "
-#~ "tenter\n"
-#~ "de le configurer automatiquement.\n"
-#~ "\n"
-#~ "Il est tr鑣 rare que cette 閠ape 閏houe, moins d'avoir un 閝uipement\n"
-#~ "obsol鑤e (ou trop r閏ent). Si le processus r閡ssit, il va d閙arrer X\n"
-#~ "automatiquement avec la meilleure r閟olution d'閏ran possible, en "
-#~ "fonction\n"
-#~ "de la taille du moniteur. Une fen阾re appara顃 alors vous demandant si\n"
-#~ "cette configuration vous convient.\n"
-#~ "\n"
-#~ "Si vous faites une installation 珷Expert牷, vous entrerez dans\n"
-#~ "l'information de configuration de X. Voir les sections correspondantes "
-#~ "du\n"
-#~ "manuel pour plus d'information.\n"
-#~ "\n"
-#~ "Si vous pouvez voir le message et cliquez sur oui, DrakX continuera la\n"
-#~ "prochaine 閠ape. Si vous ne pouvez voir la fen阾re, ceci signifie que le\n"
-#~ "test a 閏hou et vous serez ramen l'閏ran pr閏閐ant en 10 secondes."
+#~ msgid "Copy %s to %s"
+#~ msgstr "Copie de %s vers %s"
-#~ msgid "Switching between ALSA and OSS help"
-#~ msgstr "Aide sur le basculement entre OSS et ALSA"
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Sauvegarde de %s vers %s.old"
-#~ msgid "Detecting devices ..."
-#~ msgstr "D閠ection des p閞iph閞iques..."
+#~ msgid "ttf fonts conversion"
+#~ msgstr "Conversion de polices 珷True Type牷"
-#~ msgid "Test ports"
-#~ msgstr "Test des ports"
+#~ msgid "Fonts conversion"
+#~ msgstr "Conversion de polices"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
index c40e114df..632fd513d 100644
--- a/perl-install/share/po/ga.po
+++ b/perl-install/share/po/ga.po
@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2000-08-24 12:00-0000\n"
"Last-Translator: Alastair McKinstry <mckinstry@computer.org>\n"
"Language-Team: Irish <ga@li.org>\n"
@@ -12,910 +12,1449 @@ msgstr ""
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
msgstr ""
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Cancel"
-msgstr "Cealaigh"
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Launch userdrake"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "Print閕r Gr閍s醤 (lpd)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "Cur isteach diosca sa dioscthiomant %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"N韑 an m閕d c閍nna ar an rann c鷏taca\n"
+"Lean ar aghaidh ar aon n髎?"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Which username"
+msgstr "Ainm 鷖醝deora"
#: ../../any.pm:1
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+msgid "Which type of entry do you want to add?"
+msgstr "C閚 sort iontr醝l a suimigh do"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Restore partition table"
+msgstr "Scriobh cl醨-ranna"
+
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "On CUPS server \"%s\""
+msgstr "IP freastala SMP"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Cumra韔cht Iar-feist"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
msgstr ""
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "Type"
+msgstr "Cine醠"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Custom"
-msgstr "Socraithe"
+msgid "Sri Lanka"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Suimigh 鷖醝deoir"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "Ag Tosnaigh CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "More"
-msgstr "M髍"
+msgid "Gateway device"
+msgstr "Gaireas na hInneal Geata"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Here is the full list of available countries"
+msgid "Net Method:"
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "C閚 cin閍l luch骻 at agat?"
+msgid "Ethernetcard"
+msgstr "Idirl韔n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid " / Region"
+msgid "Parameters"
msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Country"
-msgstr "T韗:"
+msgid "Auto-detect"
+msgstr "Scr韔s Print閕r"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "Roghnaigh do theanga"
+msgid "Interface:"
+msgstr "suimi鷌l"
-#: ../../any.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use Unicode by default"
+msgid "Select installation class"
+msgstr "Roghnaigh rang feisti"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
msgstr ""
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Roghnaight do theangam le do thoil."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Roghnaigh an Bainist閛ir Fhuinneoga a 鷖醩d:"
+msgid "Belarus"
+msgstr ""
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Roghnagih an 鷖醝doer gne醩:"
+msgid "Error writing to file %s"
+msgstr "Earr醝dh ag scr韔bh comhad %s"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Use tape to backup"
+msgstr "Droch comhad ch鷏taca"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be installed"
msgstr ""
-"Is f閕dir linn do r韔mhaire a shocr le X a thosn i ndhiadh boot醝l.\n"
-"An dteasta韔nn uait go dtosn骹ar X nuair a aththosn韙ear an r韔mhaire?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS configuration"
+msgstr "cumra韔cht"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Uath-Logann"
+msgid "Hong Kong"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Icon"
-msgstr "Dealbh"
+msgid "Not enough free space to allocate new partitions"
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Shell"
-msgstr "Blaosc"
+msgid "Moving"
+msgstr "Ag bogadh"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Password (again)"
-msgstr "Pasfhocal (ar韘)"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Password"
-msgstr "Pasfhocal"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "User name"
-msgstr "Ainm 鷖醝deora"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "F韔r ainm"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Accept user"
+msgid "Lebanon"
msgstr ""
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Done"
-msgstr "Cr韔chnithe"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "Teasc醤"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "Scrios ci"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Roghnaigh Comhad"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Bulg醝ris"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "The DHCP start ip"
msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Add user"
-msgstr "Suimigh 鷖醝deoir"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Is ann cheana don ainm 鷖醝deora seo"
+msgid "Bootloader main options"
+msgstr "Pr韔mhroghanna boot醝l"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Is ann cheana don ainm 鷖醝deora seo"
+msgid "Tape"
+msgstr "Cine醠"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Nasc Print閕r"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please give a user name"
+msgid "Malaysia"
msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "T an pasfhocal seo ro-shimpl"
+msgid "Swiss (French layout)"
+msgstr "Eilv閕s (St韑 Francaigh)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Aththrialaigh"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "N mar a ch閕le na pasfhocail"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(already added %s)"
+msgid "size of the (second level) cpu cache"
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Carta Fuaim"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "access to compilation tools"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to network tools"
+msgid "Level %s\n"
+msgstr "Leibh閍l %s\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Luxembourg"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to administrative files"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "An Iar醝c"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "allow \"su\""
+msgid "Bus"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to rpm tools"
+msgid "Iraq"
+msgstr "An Iar醝c"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configuring..."
+msgstr "Ag cumraigh IDE"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
+msgid "The setup has already been done, and it's currently enabled."
msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "CO Eile (windows...)"
+msgid "Password (again)"
+msgstr "Pasfhocal (ar韘)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "CO Eile (MunOS...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "CO Eile (SunOS...)"
+msgid "Venezuela"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "Seoladh IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "C閚 sort iontr醝l a suimigh do"
+msgid "Choose the sizes"
+msgstr "Roghnaigh an m閕d nua"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Is ann cheana don ainm 鷖醝deora seo"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "N韑 aon ranna agat!"
+msgid "Choose another partition"
+msgstr "Cruthaigh rann nua"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "Current user"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "N韑 ceadaigh an lip閍d folamh ann"
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Ainm 鷖醝deora"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Default"
-msgstr "Gn醫h"
+msgid "Left \"Windows\" key"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "GanBhide"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "蒳righ as cumra韔cht"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Initrd-size"
-msgstr "M閕d-Initrd"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Append"
-msgstr "Append"
+msgid "Guyana"
+msgstr "An Ghu醝n"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Label"
-msgstr "Lip閍d"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Unsafe"
-msgstr "Baolach"
+msgid "Remove a module"
+msgstr "Scr韔s mod鷌l"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Table"
-msgstr "Table"
+msgid "Password"
+msgstr "Pasfhocal"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Root"
-msgstr "Root"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "L閍mh-Scr韔bh"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "蒳righ as cumra韔cht"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Scanning on your HP multi-function device"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Video mode"
-msgstr "M骴 f韘"
+msgid "Root"
+msgstr "Root"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Image"
-msgstr "Iomha"
+msgid "Choose an existing RAID to add to"
+msgstr "Roghnaigh RAID at ann le m閍d"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Default OS?"
-msgstr "OS Loiceadh?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Enable OF Boot?"
+msgid "Lilo message not found"
msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Enable CD Boot?"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Kernel Boot Timeout"
+msgid "if needed"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "Aisig comhad"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Scr韔s Print閕r"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Open Firmware Delay"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Gaireas boot醝l"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Init Message"
-msgstr "Sc閍l Tosn"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "R韔mhchlar Tosnaithe a 鷖醝d "
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Pr韔mhroghanna boot醝l"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "觭tainm Print閕r"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "Tabhair na M閕d Cuimhne as MB"
+msgid "Gurmukhi"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Enable multiple profiles"
+msgid "Force No APIC"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
+msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Eocharcl醨"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Glan /tmp nuair a thosnaigh an cor醝s"
+msgid "FTP proxy"
+msgstr "Seach-FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Feistigh c髍as"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Aisig comhad"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Cruthaigh an diosca "
+msgid "Show only for the selected day"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "restrict"
-msgstr "teorannaigh"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Teorannaigh roghanna l韓e ord"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Force No APIC"
+msgid "Logs"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Enable ACPI"
+msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Delay before booting default image"
-msgstr ""
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "compact"
-msgstr "compact"
+msgid "What kind of card do you have?"
+msgstr "C閚 cin閍l c at uait?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "Compact"
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Feisti c骴 tosnaithe"
+msgid "Security"
+msgstr "Sl醤d醝l"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of boot partition"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr ""
+msgid "<control>Q"
+msgstr "<control>E"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Gn醫h"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Feisti LILO/grub"
+msgid "Network Configuration"
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "SILO Installation"
-msgstr "Roghnaigh rang feisti"
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Skip"
-msgstr "Scipe醝l"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Sabh醝l ar dhiosca flapach"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "N韑 aon ranna agat!"
+msgid "Notice"
+msgstr "GanBhide"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
+"Arguments: (arg)\n"
"\n"
-"On which drive are you booting?"
+" Activate/Disable daily security check."
msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "Ag Cruthaigh diosca thosnaithe"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Roghnaigh na ranna at le form醝di"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Dara dioscthiom醝nt flapach"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Cead dioscthiom醤t flapach"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Br髇 orm, n韑 aon dioscthiom醤t flapach ar f醝l"
+msgid "What type of partitioning?"
+msgstr "C閚 sort rann at ort?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface"
+msgstr "Cl醨閍dan Gr閍s醤"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Form醝digh ranna"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
+msgid "These are the machines from which the scanners should be used:"
msgstr ""
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "sc閍la"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "not enough room in /boot"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "Freastala LDAP"
+
+#: ../../lang.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
+msgid "Mexico"
msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Ag form醝di"
+
+#: ../../lang.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
+msgid "Rwanda"
msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
+msgid "Do you have any %s interfaces?"
+msgstr "An bhfuil comh閍dan %s agat?"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgid "Switzerland"
msgstr ""
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-# FIXME
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "F醝le go GRUB, an roghn骾r Chor醝s "
+msgid "Brunei Darussalam"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Remote lpd Printer Options"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO le chl醨 teacs"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure Internet Access..."
+msgstr "Cumraigh gr閍s醤"
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO le Chl醨 Graphaice"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "Ioruais"
-#: ../../bootloader.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Danish"
+msgstr "Danmharghais"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "consolehelper missing"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "kdesu ar iarraidh"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
+msgid "Processors"
msgstr ""
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "N f閕dir liom rann eile a cur isteach"
-
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "%d siocand"
+msgid "Bulgaria"
+msgstr "An Bhulg醝r"
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 noim閍d"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Cumraigh ADSL"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d noim閍id"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Droch comhad ch鷏taca"
-#: ../../common.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "SMB server IP"
+msgstr "IP freastala SMP"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "United States"
-msgstr "St醝t Aontaithe Mheirice"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "srathach"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Scr韔bhfar cl醨 diosca %s go dhiosca!"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Italy"
-msgstr "Iod醠ais"
+msgid "Installing HPOJ package..."
+msgstr "Ag feisti醠 pac醝ste %s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "An Isilt韗"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Amharc"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Ioruais"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", USB printer \\#%s"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Greece"
-msgstr "Greic韘"
+msgid "Latvian"
+msgstr "羒t"
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Germany"
-msgstr "Gearm醝nis"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Czech Republic"
-msgstr "An Phoblacht nc tSeic"
+msgid "Module name"
+msgstr "Ainm Mod鷏"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belg醝ris"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Fraince"
+msgid "Start at boot"
+msgstr "Cruthaigh an diosca "
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Costa Rica"
+msgid "Use Incremental Backups"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Earr醝d ag oscailt %s do scr韔bh: %s"
+msgid "First sector of drive (MBR)"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Nothing to do"
+msgid "Joystick"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
+msgid "El Salvador"
+msgstr "An tSalvad骾r"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+msgid "Use Unicode by default"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
+msgid "Trying to rescue partition table"
+msgstr "Ag iarraidh an cl醨-ranna a tarrth醝l"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
+msgid "Option %s must be an integer number!"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
+msgid "Unable to start live upgrade !!!\n"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
+msgid "Name: "
+msgstr "Ainm: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr ""
+msgid "16 million colors (24 bits)"
+msgstr "16 milli鷑 dath (24 giot醝n)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Allow all users"
+msgstr "Suimigh 鷖醝deoir"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgid "The official MandrakeSoft Store"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
+msgid "Resizing"
+msgstr "Ag athm閍d"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
msgstr ""
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Ainm 鷖醝deora"
+
#: ../../fsedit.pm:1
#, fuzzy, c-format
msgid ""
@@ -929,738 +1468,233 @@ msgstr ""
"Ni f閕dir liom an t醔la rainn a l閍mh, t m醕haill ann :(\n"
"Leanfaidh m orm ag ceal droch rainn"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "Earr醝d"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "Freastala"
-
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "with /usr"
+msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "simpl"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "觭tainm Print閕r"
-#: ../../fs.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ag form醝di rann %s"
+msgid "Name"
+msgstr "Ainm: "
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
+msgid "mkraid failed"
+msgstr "teip ar 'mkraid'"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "Button 3 Emulation"
msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Ag form醝di rann %s"
+msgid "Sending files..."
+msgstr "Sabh醝l i gcomhad"
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "R閕teacha: %s\n"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli (Phonetic)"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Ag form醝di rann %s"
+msgid "access to rpm tools"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Creating and formatting file %s"
+msgid "edit"
msgstr ""
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Gaireas Print閕r (URI)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "n韑 a fhios agam conas %s a form醝di go %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "Form醝di %s de %s teipithe"
+msgid "Phone number"
+msgstr "Uimhir f髇"
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "Printer name, description, location"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "USA (broadcast)"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+"Please choose the\n"
+"media for backup."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Use Xinerama extension"
msgstr ""
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgid "Loopback"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "Eorap"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "leagan `kernel'"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Copying %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Roghnaigh sc醝le醤"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+msgid "Dominican Republic"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+msgid "Swaziland"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid "Set-UID"
msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Roghnaigh rann le do thoil"
+
#: ../../help.pm:1
#, c-format
msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr ""
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Luch骻 2-cnaipe Loiceadh"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
+msgid "Remove the logical volumes first\n"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet access"
+msgstr "suimi鷌l"
+
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Enabling servers..."
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+msgid "Printing test page(s)..."
msgstr ""
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+msgid "There is already a partition with mount point %s\n"
msgstr ""
#: ../../help.pm:1
@@ -1682,218 +1716,159 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+msgid "Ukraine"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Deimni"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "External ISDN modem"
+msgstr "M骾deam ISDN seantrach"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "Your choice? (default %s) "
+msgstr "Do rogha? (gn醩 %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid " / Region"
msgstr ""
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "Gan Print閕r"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Athl骴aigh"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "kernel version"
+msgstr "leagan `kernel'"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "Cumra韔cht Gr閍s醤"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "An bhfuil seo ceart?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -1908,7872 +1883,7782 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "cumra韔cht"
+
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
+msgid "Autoprobe"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Can't use broadcast with no NIS domain"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Scr韔s Print閕r"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../install2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Peru"
+msgstr "Peiri"
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Gaireas luch骾ge: %s\n"
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tharla earr醝d - n fhuaireadh aon gaireas ar a bhf閍dfa c髍ais-comhadlanna "
-"nua a cruthu. Ba ch骾r duit do chuid crua-earra a seice醝l le c鷌s an fadhb "
-"a aimsi"
+msgid "Remove Windows(TM)"
+msgstr "Dealaigh Windows(TM)"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "Earr醝d ag l閍mh comhad %s"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-#: ../../install_any.pm:1
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
+msgid "Madagascar"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+msgid "Urpmi"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "N韑"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Yes"
-msgstr "T"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "System"
+msgstr "M骴 Coras"
-#: ../../install_gtk.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "System installation"
-msgstr "Roghnaigh rang feisti"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Ag d鷑adh s韔s an ghreas醤"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "Ag tosn suas an ghr閍s醤"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Theip ar rann: %s"
+msgid "Do you want to use this feature?"
+msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
+msgid "Arabic"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "I can't find any room for installing"
-msgstr "N f閕dir liom rann eile a cur isteach"
-
-#: ../../install_interactive.pm:1
-#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
+"\n"
+"- Options:\n"
+msgstr "Roghnachais"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "趕醝d fdisk"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Pasfhocal"
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr ""
+msgid "%d minutes"
+msgstr "%d noim閍id"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
+msgid "Graphics card: %s"
+msgstr "Carta Grafach: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
+msgid "WebDAV transfer failed!"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Glan diosca ina ioml醤"
+msgid "XFree configuration"
+msgstr "Cumra韔cht XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Dealaigh Windows(TM)"
+msgid "Choose action"
+msgstr "Roghnaigh gn韔mh"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "French Polynesia"
msgstr ""
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Theip ar uathathmh閍d FAT: %s"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Resizing Windows partition"
-msgstr "Ag r韔mhadh teorainn na c髍ais-comhadlanna FAT"
-
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "Ag athm閍d"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "partition %s"
-msgstr "rann %s"
-
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
+msgid "Support the OKI 4w and compatible winprinters."
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Cruthaigh rann nua"
+msgid "Installing driver for %s card %s"
+msgstr "Ag feist醝l tiomana do %s, carta %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Freastala Print閕r"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
+msgid "Ukrainian"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "M閕d i MB do rhann malairte:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "M閕d i MB do Rhann Fr閍mhach:"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Cur isteach diosca sa dioscthiomant %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "Roghnaigh an m閕d nua"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "n fuaireathas c醨ta gr閍s醤"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "C閚 rann a bhfuil t ag iarraidh 鷖醝d mar rann fr閍mhach"
+msgid "Remove Windows"
+msgstr "Dealaigh Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Use the Windows partition for loopback"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
msgstr ""
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no existing partition to use"
-msgstr "Ag iarraidh an cl醨-ranna a tarrth醝l"
-
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Use existing partitions"
+msgid "Firewire controllers"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Use free space"
-msgstr "趕醝d sp醩 saor"
+msgid "System mode"
+msgstr "M骴 Coras"
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "Netmask:"
msgstr ""
-"N韑 aon ranna malairte agat\n"
-"\n"
-"x1Lean ar aghaidh ar aon n髎?"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
+msgid "Append"
+msgstr "Append"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
-"%s\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
+"It also provides a much higher API than OSS.\n"
"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+"You may prefer to replay the installation.\n"
msgstr ""
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ag tosn ar c閕m `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Help"
-msgstr "/C_鷌di"
+msgid "Network printer \"%s\", port %s"
+msgstr "Print閕r Gr閍s醤 (lpd)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "Cumraigh"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure"
-msgstr "Cumraigh"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "C閚 leagan amach at ar d'eocharchl醨sa"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "Lean ar aghaidh ar aon n髎?"
+msgid "Printer Device URI"
+msgstr "Gaireas Print閕r (URI)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There was an error installing packages:"
+msgid "Not erasable media!"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr ""
+msgid "Terminal-based"
+msgstr "Teirmin閍l-bhunaithe"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+msgid "Installing a printing system in the %s security level"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Tarrth醝l"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Is ann cheana don ainm 鷖醝deora seo"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../any.pm:1
#, c-format
-msgid "Accept"
-msgstr "Aontaigh"
+msgid "Other OS (windows...)"
+msgstr "CO Eile (windows...)"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Installing package %s"
-msgstr "Ag feisti醠 pac醝ste %s"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d pac醝st"
+msgid "Reading printer database..."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "Sonra"
+msgid "Generate auto install floppy"
+msgstr "Cruthaigh flapach boot醝l"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Details"
-msgstr "Sonra"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Fan tamall, ag ullmhaigh feisti"
+msgid "Somalia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Am fagtha "
+msgid "No open source driver"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Estimating"
-msgstr "Ag meast"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Installing"
-msgstr "Ag Feisti"
+msgid "Nicaragua"
+msgstr "Nicaragua"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the packages you want to install"
+msgid "New Caledonia"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Eirigh as Feisti"
+msgid "European protocol (EDSS1)"
+msgstr "Eorap (EDS11)"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Roghn Gr鷓a Pac醝st"
+#: ../../any.pm:1
+#, c-format
+msgid "Video mode"
+msgstr "M骴 f韘"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "Sabh醝l ar dhiosca flapach"
+msgid "Please enter your email address below "
+msgstr "Aththrialaigh"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "<- Previous"
+msgid "Oman"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Install"
-msgstr "Feisti"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr ""
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "New size in MB: "
+msgstr "M閕d i MB: "
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
+msgid "Partition table type: %s\n"
+msgstr "Cin閍l tabla rann: %s\n"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication Windows Domain"
+msgstr "Deimni LDAP"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
+msgid "US keyboard"
+msgstr "Me醨chl醨 US"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "You can't select/unselect this package"
+msgid "Buttons emulation"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The following packages are going to be removed"
+msgid ", network printer \"%s\", port %s"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The following packages are going to be installed"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Importance: %s\n"
-msgstr "T醔hacht: %s\n"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "M閕d: %d KB\n"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Sabh醝l i gcomhad"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Leagan: %s\n"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ainm: %s\n"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Cumraigh Lilo/Grub"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Pac醝ste m韈heart"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Other"
-msgstr "Eile"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "East骾nis"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "M閕d ioml醤: %d / %d MB"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Fan tamall"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Next ->"
-msgstr ""
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection speed"
+msgstr "Athraigh cine醠 ranna"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Individual package selection"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package Group Selection"
-msgstr "Roghn Gr鷓a Pac醝st"
-
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Namibia"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Save packages selection"
-msgstr "Roghn Gr鷓a Pac醝st"
+msgid "Database Server"
+msgstr "Freastala Print閕r"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Automated"
+msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Replay"
-msgstr "Athl骴aigh"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Generate auto install floppy"
-msgstr "Cruthaigh flapach boot醝l"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Please wait, setting security options..."
+msgstr "Fan tamall, ag ullmhaigh feisti"
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Creating auto install floppy..."
+msgid "Launch the graphical environment when your system starts"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid " Successfuly Restored on %s "
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
+msgid "Making printer port available for CUPS..."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "Feistigh c骴 tosnaithe"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Antigua and Barbuda"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use aboot?"
-msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Ag Ullmhaigh r韔mhchlar thosnaithe"
+msgid "Spanish"
+msgstr "Sp醝nis"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Cl醨 Tosn"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Ainm Fearannas"
+msgid "Configuring applications..."
+msgstr "Cumraigh print閕r"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "Fearannas NIS"
+msgid "Normal modem connection"
+msgstr "Cumraigh nasc ghr閍s醤"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "Deimni LDAP"
+msgid "File Selection"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "Freastala NIS"
+msgid "CUPS"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "NIS Domain"
-msgstr "Fearannas NIS"
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication NIS"
-msgstr "Deimni NIS"
+msgid "Bootloader installation"
+msgstr "Feisti c骴 tosnaithe"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Root partition size in MB: "
+msgstr "M閕d i MB do Rhann Fr閍mhach:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "Freastala LDAP"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LDAP Base dn"
+msgid "Etherboot ISO image is %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr "Deimni LDAP"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "Disconnect..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local files"
-msgstr "Chomaid 羒ti鷏"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
-#, c-format
-msgid "Authentication"
-msgstr "Deimni"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "Poirt"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid "Palau"
msgstr ""
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No password"
-msgstr "Gan pasfhocal"
+msgid "level"
+msgstr "leibh閍l"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Set root password"
-msgstr "Socraigh pasfhocal root"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Package Group Selection"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Services"
-msgstr "Seirbish"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "System"
-msgstr "M骴 Coras"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Poirt"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "R韔mhchlar Tosnaithe a 鷖醝d "
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "Table"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Choose the resolution and the color depth"
+msgstr "Roghnaigh R閕teach agus an m閕d dath"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "activated"
+msgid "Emulate third button?"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Firewall"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Security"
-msgstr "Sl醤d醝l"
+msgid "Mount"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
+msgid "Creating auto install floppy"
+msgstr "Cruthaigh flapach boot醝l"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Network"
-msgstr "Cl醨閍dan Gr閍s醤"
+msgid "Install updates"
+msgstr "Feistigh c髍as"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Cl醨閍dan Gr閍s醤"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text box height"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X ag t鷖"
+msgid "State"
+msgstr "Cl醨 Tosn"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Hardware"
+msgid "Be sure a media is present for the device %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "TV card"
-msgstr "Carta Telef韘"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid "Enable multiple profiles"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Sound card"
-msgstr "Carta Fuaim"
+msgid "Local printer"
+msgstr "Print閕r 醝ti鷏"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "Scrios Freastala CUPS"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No printer"
-msgstr "Gan Print閕r"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer"
-msgstr "Print閕r"
+msgid "Package selection"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse"
-msgstr "Luch骻"
+msgid "Mauritania"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Timezone"
-msgstr "Am Cr韔s"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Eocharcl醨"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Summary"
-msgstr "Coimri"
+msgid "All primary partitions are used"
+msgstr "T na ranna pr韔fa uilig 鷖醝dthe"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "Freastala NTP"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "An bhfuil an clog cruaearrach ar GMT?"
+msgid "Installation Server Configuration"
+msgstr "蒳righ as cumra韔cht"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "C閚 ceann do chrois ama"
+msgid "Configuring IDE"
+msgstr "Ag cumraigh IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "An dteasta靜nn uait print閕r a chumr?"
+msgid "Network functionality not configured"
+msgstr "N韑 aon sc醝le醤 cumraithe"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Teip ar glaoch `fork': %s"
+msgid "Configure module"
+msgstr "Cumraigh luch骻"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Athraigh cine醠 ranna"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Beidh ort an r韔mhaire a aththosn sula nd閍nfar an athr"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
+msgid "Provider phone number"
+msgstr "Uimhir f髇"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "Cumra韔cht Iar-feist"
+msgid "Host %s"
+msgstr "觭tAinm"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
+msgid "Armenia"
msgstr ""
-"Ag feiste醝l pac醝ste %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Ag Ullmhaigh feisti"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
+msgid "Fiji"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "All"
-msgstr "Gach Rud"
+msgid "Second floppy drive"
+msgstr "Dara dioscthiom醝nt flapach"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
+msgid "About Harddrake"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "With basic documentation (recommended!)"
+msgid "Drive capacity"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "With X"
-msgstr "Fan tamall"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
+"Cur diosca flapach sa dioscthiomant\n"
+"Caillfear gach sonra ar an dhiosca seo"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Type of install"
-msgstr "Roghnaigh pac醝st a feisti ..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Size: %s"
+msgstr "M閕d: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Selected size is larger than available space"
+msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
+msgid "secondary"
+msgstr "%d siocand"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Loading from floppy"
-msgstr "Aisig dhiosca flapach"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Package selection"
-msgstr "Roghn Gr鷓a Pac醝st"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Save on floppy"
-msgstr "Sabh醝l ar dhiosca flapach"
+msgid "No password"
+msgstr "Gan pasfhocal"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "Aisig dhiosca flapach"
+msgid "Nigeria"
+msgstr "An Nig閕r"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no existing partition to use"
+msgstr "Ag iarraidh an cl醨-ranna a tarrth醝l"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Ag curdach do na pac醝st at ar f醝l"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hard drive information"
+msgstr "Eolas R-Phost"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Ag c鷕dach pac醝st le h鷄sgr醖"
+msgid "Russian"
+msgstr "Ruisl韘"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Roghnaigh pac醝st ..."
+msgid "Jordan"
+msgstr "An Iord醝n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Ag curdach do na pac醝st at ar f醝l"
+msgid "Hide files"
+msgstr "teip ar 'mkraid'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nil dothain spas malartu chun insealbhu, chuir leis an spas"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Scr韔s Print閕r"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr ""
+msgid "Sorry, no floppy drive available"
+msgstr "Br髇 orm, n韑 aon dioscthiom醤t flapach ar f醝l"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Roghnaigh na ranna at le form醝di"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Beidh ort an r韔mhaire a aththosn sula nd閍nfar an athr"
+msgid "Bolivia"
+msgstr "An Bholaiv"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the mount points"
+msgid "Bad package"
+msgstr "Pac醝ste m韈heart"
+
+#: ../../share/advertising/07-server.pl:1
+#, c-format
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Roghnachais"
+
+#: ../../standalone/draksound:1
#, c-format
-msgid "Scanning partitions to find mount points"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No partition available"
-msgstr "n韑 aon ranna saora ann"
+msgid "Romania"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Gaireas boot醝l"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Ag cumraigh IDE"
+msgid "Canada"
+msgstr "Ceanada"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Remove from LVM"
+msgstr "Bain RAID"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Cumraigh C醨ta PCMCIA"
+msgid "Timezone"
+msgstr "Am Cr韔s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "German"
+msgstr "Gearm醝nis"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Button 3 Emulation"
+msgid "Next ->"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Button 2 Emulation"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Buttons emulation"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
+msgid "Guinea-Bissau"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Gaireas luch骾ge"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "C閚 cin閍l luch骻 at agat?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "N mar a ch閕le na pasfhocail"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Uasgr醖aigh"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Feistigh n uasgr醖aigh ?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Feisti鷌/Uadgr醖aigh"
+msgid "Horizontal refresh rate"
+msgstr "R醫a athnuachana cothrom醤ach"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "C閚 leagan amach at ar d'eocharchl醨sa"
-
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Quit"
-msgstr "蒩laigh"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "License agreement"
-msgstr "Cead鷑as"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Tharla earr醝d"
+msgid "USB controllers"
+msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgid "What norm is your TV using?"
msgstr ""
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Feisti Linux-Mandrake %s"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
-msgstr "N韑 dioscthiom醤t flapach ar f醝l"
+msgid "Type:"
+msgstr "Cine醠: "
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to %s"
-msgstr "F醝lte go %s"
+msgid "Share name"
+msgstr "Comh. ainm"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+msgid "enable"
msgstr ""
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../install_steps.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
-"Ta earraid ann, n韑 a fhios agam conas a cheart.\n"
-"Lean ort, ar do phriacal f閕n."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "Fan tamall"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "Ceart go Leor"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Criochnaigh"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove the loopback file?"
+msgstr "Ag form醝di comhad 'loopback' %s"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Basic"
+msgid "Selected size is larger than available space"
msgstr ""
-#: ../../interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Advanced"
-msgstr "R閍mhioa韔cht"
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Scr韔s Print閕r"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, c-format
-msgid "Modify"
-msgstr "Athraigh"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "Suim"
+msgid "Please choose your country."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "Roghnaigh gn韔mh"
+msgid "Hard Disk Backup files..."
+msgstr "Droch comhad ch鷏taca"
#: ../../keyboard.pm:1
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
+#, fuzzy, c-format
+msgid "Laotian"
+msgstr "羒t"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Right \"Windows\" key"
+msgid "Samoa"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Left \"Windows\" key"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "\"Menu\" key"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Roghnaigh carta grafachach"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "CapsLock key"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "sainordaitheach"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid "Welcome To Crackers"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
+msgid "Module options:"
+msgstr "Roghachais mod鷌l:"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Right Alt key"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "Cumraigh gr閍s醤"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr ""
+msgid "Abort"
+msgstr "Tobscoir"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
+msgid "No password prompt on %s at port %s"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Mearchl醨 US (idirnaisi鷑ta)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard"
-msgstr "Me醨chl醨 US"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "趕醝d sp醩 saor"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "UK keyboard"
-msgstr "M閍rchl醨 UK"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Ukrainian"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
#: ../../keyboard.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Ioruais)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
+msgid "Hard Disk Backup Progress..."
msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Me醨chl醨 US"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Unable to fork: %s"
+msgstr "Teip ar glaoch `fork': %s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr ""
+msgid "Type: "
+msgstr "Cine醠: "
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
+msgid "<-- Edit Client"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "no fonts found"
+msgstr "Teip ag cuardach %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Mouse"
+msgstr "Luch骻"
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Serbian (cyrillic)"
+msgid "not enough room in /boot"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Sl骲aicis (QWERTY)"
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Sl骲aicis (QWERTZ)"
+msgid "Host name"
+msgstr "觭tAinm"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Slovenian"
+msgid "Liechtenstein"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Swedish"
+msgid "the color of the progress bar"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "R鷌sis (Yawerty)"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Russian"
-msgstr "Ruisl韘"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "R鷌sis (Yawerty)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "R鷌sis (Yawerty)"
+msgid "Add to RAID"
+msgstr "Cur le RAID"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Canadian (Quebec)"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Portuguese"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "N韑 dioscthiom醤t flapach ar f醝l"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Norwegian"
-msgstr "Ioruais"
+msgid "Continue anyway?"
+msgstr "Lean ar aghaidh ar aon n髎?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Dutch"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "Printer"
+msgstr "Print閕r"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Maltese (UK)"
+msgid "Saudi Arabia"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
-msgstr ""
+msgid "Internet"
+msgstr "Idirl韔n"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Myanmar (Burmese)"
+msgid "Some devices were added:\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Macedonian"
-msgstr ""
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "C閕mseasamh: %s sorc骾r, %s ceann, %s teasc醤\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "Ag d鷑adh s韔s an ghreas醤"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Malayalam"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "羒t"
+msgid "Restore From Tape"
+msgstr "Scriobh cl醨-ranna"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the profile to configure"
+msgstr "Roghnagih an 鷖醝doer gne醩:"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "羒t"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latin American"
-msgstr "Mheirce Theas"
+msgid "Restarting printing system..."
+msgstr "Scr韔s Print閕r"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Korean keyboard"
-msgstr "M閍rchl醨 Ch骾ris"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Se醦ainis (106 eochair)"
+msgid "See hardware info"
+msgstr "Le醡h an t-eolais crua-earra"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Inuktitut"
+msgid "First sector of boot partition"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italian"
-msgstr "Iod醠ais"
+msgid "Printer manufacturer, model"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Icelandic"
+msgid "PDQ - Print, Don't Queue"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Iranian"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Israeli (Phonetic)"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Israeli"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Croatian"
-msgstr "Cr骾tis"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "Ung醨ais"
+msgid "Modify"
+msgstr "Athraigh"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Gurmukhi"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Gujarati"
+msgid "Need hostname, username and password!"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "Greic韘"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
+msgid "HardDrake"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "French"
-msgstr "Francaigh"
+msgid "new"
+msgstr "nua"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Finnish"
-msgstr "Fionlainnais"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "An dteasta靜nn uait print閕r a chumr?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Sp醝nis"
+msgid "Wizard"
+msgstr "Dra韔doir"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Estonian"
-msgstr "East骾nis"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "Scrios ci"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Meirice)"
+msgid "Please choose where you want to backup"
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Ioruais)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Beidh ort an r韔mhaire a aththosn sula nd閍nfar an athr"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (Meirice)"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Danish"
-msgstr "Danmharghais"
+msgid "Please, choose your keyboard layout."
+msgstr "C閚 leagan amach at ar d'eocharchl醨sa"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Devanagari"
+msgid "Standard"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "German (no dead keys)"
-msgstr "Gearm醝nis (gach meachl醨 marbh)"
+msgid "Please choose your mouse type."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "German"
-msgstr "Gearm醝nis"
+msgid "Connect..."
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Ceich韘 (QWERTY)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Cumraigh print閕r"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "Cumraigh"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Ceich韘 (QWERTZ)"
+msgid "ISA / PCMCIA"
+msgstr "ISA/ PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Tobscoir"
+
+#: ../../network/network.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Eilv閕s (St韑 Francaigh)"
+msgid "Proxies configuration"
+msgstr "Cumraigh seach-freastala"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Eilv閕s (St韑 Ghearm醤ais)"
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Belar鷌sis"
+msgid "Start: sector %s\n"
+msgstr "T鷖: teasc醤 %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "East骾nis"
+msgid "Network interface already configured"
+msgstr "N韑 aon sc醝le醤 cumraithe"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Brazilian (ABNT-2)"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulg醝ris"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Bulg醝ris"
+msgid "Mail Server"
+msgstr "Freastala Print閕r"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Bengali"
-msgstr ""
+msgid "Please click on a partition"
+msgstr "Roghnaigh rann le do thoil"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Belgian"
-msgstr "Belg醝ris"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Azerbaidjani (latin)"
+msgid "Have a nice day!"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Arabic"
+msgid "across Network"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr ""
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "Uasgr醖aigh"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Armenian (typewriter)"
+msgid "Select Printer Connection"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Armenian (old)"
+msgid "Scanning for TV channels in progress ..."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Albanian"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Polish"
-msgstr "Polainnais"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Zimbabwe"
+msgid "the height of the progress bar"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zambia"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
msgstr ""
#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "South Africa"
+msgid "Argentina"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Serbia"
-msgstr "srathach"
-
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mayotte"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Yemen"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Ainm Fearannas"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
+
+#: ../../fsedit.pm:1
#, c-format
-msgid "Samoa"
+msgid "Mount points must begin with a leading /"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Freastala Print閕r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
+msgid "Quit without saving"
+msgstr "蒩laigh gan sabh醝l"
#: ../../lang.pm:1
#, c-format
-msgid "Vanuatu"
+msgid "Yemen"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Vietnam"
+msgid "This product is available on the MandrakeStore Web site."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
msgstr ""
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Virgin Islands (British)"
+msgid "=> There are many things to choose from (%s).\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Venezuela"
+msgid "Hard drive detection"
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "羒t"
+msgid "Please enter the WebDAV server URL"
+msgstr "Teast醝l an luch骻, le do thoil"
#: ../../lang.pm:1
#, c-format
-msgid "Uzbekistan"
+msgid "Tajikistan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Uruguay"
-msgstr ""
+msgid "Accept"
+msgstr "Aontaigh"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr ""
+msgid "Description"
+msgstr "Cuntas"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Uganda"
-msgstr ""
+msgid "Error opening %s for writing: %s"
+msgstr "Earr醝d ag oscailt %s do scr韔bh: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Ukraine"
-msgstr ""
+msgid "Mouse type: %s\n"
+msgstr "Cine醠 luch骻: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Tanzania"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "羒t"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "C閚 leagan amach at ar d'eocharchl醨sa"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Tuvalu"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
+msgid "Expert Area"
+msgstr "Roghnachais Saineoia"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Turkey"
-msgstr ""
+msgid "Choose a monitor"
+msgstr "Roghnaigh sc醝le醤"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tonga"
-msgstr ""
+msgid "Empty label not allowed"
+msgstr "N韑 ceadaigh an lip閍d folamh ann"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Tunisia"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "I can't add any more partition"
+msgstr "N f閕dir liom rann eile a cur isteach"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "East Timor"
-msgstr ""
+msgid "Size in MB: "
+msgstr "M閕d i MB: "
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Tokelau"
-msgstr ""
+msgid "Remote printer"
+msgstr "Scr韔s Print閕r"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tajikistan"
-msgstr ""
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Thailand"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"Is f閕dir linn do r韔mhaire a shocr le X a thosn i ndhiadh boot醝l.\n"
+"An dteasta韔nn uait go dtosn骹ar X nuair a aththosn韙ear an r韔mhaire?"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Form醝digh"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "French Southern Territories"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Print閕r"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Chad"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Turks and Caicos Islands"
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "N韑 aon ranna agat!"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Swaziland"
+msgid "Alternative drivers"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Syria"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "An tSalvad骾r"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Sao Tome and Principe"
+msgid "Cape Verde"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Suriname"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Somalia"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Senegal"
+msgid "Guam"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "San Marino"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Sierra Leone"
-msgstr ""
+msgid "/Options/Test"
+msgstr "/Roghnachais/Teast醝l"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Slovakia"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "Ag form醝di rann %s"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
+msgid "User name"
+msgstr "Ainm 鷖醝deora"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "New configuration (isdn-light)"
+msgstr "Cumra韔cht Gr閍s醤"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Cl骴骾r"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "C閚 rann a bhfuil t ag iarraidh 鷖醝d mar rann fr閍mhach"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Socraigh c髍as chomhad"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Bain trial as ar韘"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovenia"
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "R閕teacha: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Roghanna Print閕r NetWare"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Saint Helena"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Cuimhne Charta (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Singapore"
-msgstr ""
+msgid "France"
+msgstr "Fraince"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Sudan"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Seychelles"
+msgid "Checking installed software..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Scr韔s Print閕r"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Solomon Islands"
+msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Saudi Arabia"
+msgid "Turkey"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Rwanda"
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Russia"
-msgstr "Ruisl韘"
+msgid "Number of buttons"
+msgstr "2 cnaip"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Romania"
+msgid "Vietnamese \"numeric row\" QWERTY"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Luch骻"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reunion"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Qatar"
+msgid "Hardware"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Palau"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
+msgid "United States"
+msgstr "St醝t Aontaithe Mheirice"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Portugal"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Roghn Gr鷓a Pac醝st"
+msgid "Default OS?"
+msgstr "OS Loiceadh?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr ""
+msgid "Swiss (German layout)"
+msgstr "Eilv閕s (St韑 Ghearm醤ais)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Pitcairn"
-msgstr ""
+msgid "Configure all heads independently"
+msgstr "Cumraigh gach cinn ar leith"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Poland"
-msgstr "An Pholainn"
+msgid "NTP Server"
+msgstr "Freastala NTP"
-#: ../../lang.pm:1
-#, c-format
-msgid "Pakistan"
-msgstr "An Phacast醤"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Load/Save on floppy"
+msgstr "Sabh醝l ar dhiosca flapach"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Philippines"
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr ""
+msgid "nice"
+msgstr "deas"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d siocand"
+
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Please choose which serial port your modem is connected to."
+msgstr "C閚 cin閍l luch骻 at agat?"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "T韗:"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Poirt"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid "French Polynesia"
+msgid "Ghostscript"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Peru"
-msgstr "Peiri"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "LAN Configuration"
+msgstr "cumra韔cht"
#: ../../lang.pm:1
#, c-format
-msgid "Panama"
-msgstr ""
+msgid "Ghana"
+msgstr "G醤a"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Oman"
+msgid "Path or Module required"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "New Zealand"
-msgstr "An Nua-Sh閍lainn"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "蒳righ as cumra韔cht"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Niue"
+msgid "Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Nauru"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Nepal"
-msgstr "Neipe醠"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
+msgid "There was an error installing packages:"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Nigeria"
-msgstr "An Nig閕r"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Norfolk Island"
-msgstr ""
+msgid "Undo"
+msgstr "Leas"
-#: ../../lang.pm:1
-#, c-format
-msgid "Niger"
-msgstr "An N韌ir"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Save partition table"
+msgstr "Scriobh cl醨-ranna"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr ""
+msgid "Finnish"
+msgstr "Fionlainnais"
#: ../../lang.pm:1
#, c-format
-msgid "Namibia"
+msgid "Macedonia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mozambique"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Malaysia"
+msgid "Slovenian"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mexico"
+msgid "Libya"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Malawi"
+msgid "Configuring scripts, installing software, starting servers..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Maldives"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mauritius"
-msgstr ""
+msgid "Table"
+msgstr "Table"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Malta"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "n韑 a fhios agam conas %s a form醝di go %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Montserrat"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Luch骻"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mauritania"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "Freastala NIS"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Martinique"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Luch骻"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Northern Mariana Islands"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mongolia"
+msgid "Tuvalu"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Myanmar"
+msgid "Use auto detection"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mali"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Macedonia"
+msgid "Started on boot"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Marshall Islands"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Madagascar"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Moldova"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Monaco"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Morocco"
+msgid "East Timor"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Libya"
+msgid "Del profile..."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Latvia"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing Foomatic..."
+msgstr "Ag feisti醠 pac醝ste %s"
+
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "蒳righ as le do thoil agus Crtl-Alt-BackSpace a 鷖醝d"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "Scr韔s Print閕r"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Lithuania"
+msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Roghn Gr鷓a Pac醝st"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Lesotho"
+msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liberia"
+msgid "SECURITY WARNING!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Oifig"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Sri Lanka"
+msgid "No, I don't want autologin"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Liechtenstein"
+msgid "Windows Migration tool"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Roghnaigh do theanga"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "R閕teacha: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Testing your connection..."
+msgstr "Cumraigh nasc ghr閍s醤"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "m閕d smut醤"
+
+#: ../../security/level.pm:1
#, c-format
-msgid "Saint Lucia"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lebanon"
-msgstr ""
+msgid "Start sector: "
+msgstr "Teasc醤 tosasch: "
#: ../../lang.pm:1
#, c-format
-msgid "Laos"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "Kazakhstan"
+msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Cayman Islands"
+msgid "Seychelles"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kuwait"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "M髍"
+msgid "Bad password on %s"
+msgstr "Gan pasfhocal"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Korea (North)"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Saint Kitts and Nevis"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Comoros"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Kiribati"
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Cambodia"
-msgstr ""
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwerty)"
+msgstr "R鷌sis (Yawerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kyrgyzstan"
+msgid "Under Devel ... please wait."
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Kenya"
-msgstr "An Ch閕nia"
+msgid "Czech Republic"
+msgstr "An Phoblacht nc tSeic"
#: ../../lang.pm:1
#, c-format
-msgid "Japan"
-msgstr "An tSeap醝n"
+msgid "Egypt"
+msgstr "An 蒳gipt"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Jordan"
-msgstr "An Iord醝n"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Jamaica"
-msgstr "Iam醝ce"
+msgid "Old configuration (isdn4net)"
+msgstr "蒳righ as cumra韔cht"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Iceland"
-msgstr "An 蚾slainn"
+msgid "Sound card"
+msgstr "Carta Fuaim"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "An Iar醝c"
+msgid "Import Fonts"
+msgstr "Form醝digh ranna"
-#: ../../lang.pm:1
-#, c-format
-msgid "Iraq"
-msgstr "An Iar醝c"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"T rann m髍 FAT amh醝n agat.\n"
+"Molaim dhuit an rann sin a athmh閍d ar dt鷖\n"
+"(roghnaigh an rann agus br ar \"Athm閕digh\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "Suppress Temporary Files"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "India"
-msgstr "An India"
+msgid "Change partition type"
+msgstr "Athraigh cine醠 ranna"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Israel"
-msgstr "Iosrael"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Ireland"
-msgstr "Athl骴aigh"
+msgid "Network Options"
+msgstr "Roghachais mod鷌l:"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Indonesia"
-msgstr "An Indin閕s"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Hungary"
-msgstr "An Ung醝r"
+msgid "Statistics"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Haiti"
-msgstr "H醝ti"
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "(mod韑 %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Croatia"
-msgstr ""
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Honduras"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Heard and McDonald Islands"
+msgid "average"
msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Gan Print閕r"
+
#: ../../lang.pm:1
#, c-format
-msgid "Hong Kong"
+msgid "Equatorial Guinea"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "China"
-msgstr "An tS韓"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Guyana"
-msgstr "An Ghu醝n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Droch comhad ch鷏taca"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guinea-Bissau"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Guam"
+msgid "Currently, no alternative possibility is available"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Guatemala"
-msgstr "Guatamala"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwertz)"
+msgstr "R鷌sis (Yawerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid "Write Config"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Equatorial Guinea"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Guadeloupe"
+msgid "Kiribati"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Guinea"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gambia"
+msgid "Browse"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Greenland"
-msgstr "An Ghraonlainn"
-
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Gibraltar"
+msgid "CDROM"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Ghana"
-msgstr "G醤a"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "French Guiana"
-msgstr ""
+msgid "Belgian"
+msgstr "Belg醝ris"
-#: ../../lang.pm:1
-#, c-format
-msgid "Georgia"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "An bhfuil ceann eile agat?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Grenada"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United Kingdom"
-msgstr ""
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "Fearannas NIS"
-#: ../../lang.pm:1
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "N f閕dir liom rann eile a cur isteach"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "觭tAinm"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Gabon"
-msgstr ""
+msgid "/File/Save _As"
+msgstr "/Comhad/S醔h醝l _Mar"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Faroe Islands"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Micronesia"
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
+msgid "Delay before booting default image"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Fiji"
-msgstr ""
+msgid "Restrict command line options"
+msgstr "Teorannaigh roghanna l韓e ord"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Eorap"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Finland"
-msgstr "An Fhionlainn"
+msgid "Use free space"
+msgstr "趕醝d sp醩 saor"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Ethiopia"
-msgstr "An Aet骾p"
+msgid "use dhcp"
+msgstr "鷖醝d dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Spain"
+msgid "Mail alert"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Eritrea"
-msgstr ""
+msgid "Internet configuration"
+msgstr "Cumraigh Idirl韔n"
#: ../../lang.pm:1
#, c-format
-msgid "Western Sahara"
+msgid "Uzbekistan"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Egypt"
-msgstr "An 蒳gipt"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "Pointe taca dublach %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Scr韔s Print閕r"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Estonia"
-msgstr ""
+msgid "Finish"
+msgstr "Criochnaigh"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "Eacuad髍"
+msgid "Show automatically selected packages"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Algeria"
-msgstr "An Alg閕r"
+msgid "CPU flags reported by the kernel"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Dominican Republic"
+msgid "Togo"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Dominica"
+msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Denmark"
-msgstr "An Danmhairg"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Djibouti"
-msgstr ""
+msgid "Please try again"
+msgstr "Aththrialaigh"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "An bhfuil seo ceart?"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Cyprus"
-msgstr "An Chipir"
+msgid "FAT resizing failed: %s"
+msgstr "Theip ar uathathmh閍d FAT: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Christmas Island"
+msgid "Individual package selection"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cape Verde"
+msgid "This partition is not resizeable"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cuba"
-msgstr "C鷅a"
+msgid "Location"
+msgstr "羒t"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Colombia"
-msgstr "AN Chol骾m"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "Camar鷑"
+msgid "Journalised FS"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Chile"
-msgstr "An tSile"
+msgid "Guatemala"
+msgstr "Guatamala"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Cook Islands"
+msgid "This machine"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr ""
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Litir Dioscthiom醤t DOS: %s (buile faoi thuraim)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Switzerland"
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
+msgid "Bahrain"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Central African Republic"
-msgstr ""
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "omit scsi modules"
+msgstr "Luch骻 ar bith"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Canada"
-msgstr "Ceanada"
+msgid "Keyboard layout: %s\n"
+msgstr "Leagan amach eocharchl醨a: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Belize"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Belarus"
+msgid "Maltese (US)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Botswana"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "Carta Telef韘"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Bhutan"
+msgid "Toggle between normal/expert mode"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Bahamas"
-msgstr ""
+msgid "Size"
+msgstr "M閕d"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
#: ../../lang.pm:1
#, c-format
-msgid "Brazil"
-msgstr "An Bhrasail"
+msgid "Greenland"
+msgstr "An Ghraonlainn"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "An Bholaiv"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Brunei Darussalam"
+msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bermuda"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Roghnaigh Comhad"
+
+#: ../../help.pm:1
#, c-format
-msgid "Benin"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Burundi"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Bahrain"
+msgid "Which configuration of XFree do you want to have?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bulgaria"
-msgstr "An Bhulg醝r"
+msgid "More"
+msgstr "M髍"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Burkina Faso"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Bangladesh"
-msgstr "An Bhanglaid閕s"
+msgid "Account Password"
+msgstr "Pasfhocal"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Barbados"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr ""
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "Me醨chl醨 US"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Azerbaijan"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Aruba"
+msgid "Font List"
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "srathach"
-
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "American Samoa"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Argentina"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Antarctica"
-msgstr ""
+msgid "Select file"
+msgstr "Roghnaigh Comhad"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands Antilles"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Armenia"
-msgstr ""
+msgid "Japan"
+msgstr "An tSeap醝n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Albania"
-msgstr "An Alb醝n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Roghanna Print閕r"
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Anguilla"
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr ""
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "freastala DNS"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United Arab Emirates"
+msgid "NCP queue name missing!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Andorra"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "An Afghanast醝n"
+msgid "Cd-Rom labeled \"%s\""
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
-#: ../../loopback.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Circular mounts %s\n"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-#: ../../lvm.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Remove the logical volumes first\n"
+msgid "Turn your computer into a reliable server"
msgstr ""
-#: ../../modules.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid " (driver %s)"
+msgstr " (tiom醝nt %s)"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"Loopback file(s):\n"
+" %s\n"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BOG DO ROTHAR!"
+msgid "I don't know"
+msgstr "N韑 fh韔s agam"
-#: ../../mouse.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "To activate the mouse,"
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Teast醝l an luch骻, le do thoil"
+msgid ""
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "No mouse"
-msgstr "Luch骻 ar bith"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "Ar bith"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Eirigh as Feisti"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "3 buttons"
-msgstr "3 cnaip"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "2 buttons"
-msgstr "2 cnaip"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "1 button"
-msgstr "1 Cnaipe"
+msgid "Mongolian (cyrillic)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Add a module"
+msgstr "Suimigh Mod鷌l"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Profile to delete:"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Luch骻 Logitech (srathach, s閍n cin閍l C7)"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Chomaid 羒ti鷏"
#: ../../mouse.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Account Login (user name)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Luch骻 Logitech CC"
+msgid "Benin"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Uruguay"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Luch骻 MouseMan"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Luch骻 Gn醫h 3-cnaipe"
+msgid "Monitor: %s\n"
+msgstr "Sc醝le醤: %s\n"
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Luch骻 2-cnaipe Loiceadh"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "serial"
-msgstr "srathach"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "觭tainm Print閕r"
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Please check all users that you want to include in your backup."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wheel"
-msgstr "Rothar"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Generic"
-msgstr "Gn醫h"
+msgid "Bangladesh"
+msgstr "An Bhanglaid閕s"
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Gn醫h (PS/2)"
+msgid "Initial tests"
+msgstr "Sc閍l Tosn"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Continue"
+msgstr "Lean"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Logitech MouseMan+"
-msgstr "Luch骻 Bus Logitech"
+msgid "Custom Restore"
+msgstr "Socraithe"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Standard"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Luch骻 - Sun"
+msgid "Script-based"
+msgstr "Script-bhunaithe"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr ""
+msgid "Error reading file %s"
+msgstr "Earr醝d ag l閍mh comhad %s"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Ag form醝di"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Expand Tree"
+msgid "You must have a FAT partition mounted in /boot/efi"
msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Info"
-msgstr "Eolas"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "An bhfuil seo ceart?"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
-#: ../../my_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-#: ../../partition_table.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "Earr醝dh ag scr韔bh comhad %s"
+msgid "Other OS (SunOS...)"
+msgstr "CO Eile (SunOS...)"
-#: ../../partition_table.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Feisti鷌/Uadgr醖aigh"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad backup file"
-msgstr "Droch comhad ch鷏taca"
+msgid "%d packages"
+msgstr "%d pac醝st"
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Restoring from file %s failed: %s"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
msgstr ""
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Deimni"
+
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
+msgid "Costa Rica"
msgstr ""
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "Roghnaigh cumra韔cht an freastala"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "mount failed: "
+msgid "Icelandic"
msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "maybe"
-msgstr "b'fh閕dir"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "nice"
-msgstr "deas"
+msgid "Please relog into %s to activate the changes"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "very nice"
-msgstr "an-dheas"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "important"
-msgstr "t醔hachtach"
+msgid "Lilo/grub mode"
+msgstr "M骴 Lilo/Grub"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "must have"
-msgstr "riachtanas"
+msgid "Output"
+msgstr "Aschur"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
+msgid "Circular mounts %s\n"
msgstr ""
-#: ../../raid.pm:1
-#, c-format
-msgid "mkraid failed"
-msgstr "teip ar 'mkraid'"
-
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
+msgid "Martinique"
msgstr ""
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
+msgid "HardDrive / NFS"
msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Teasc醤"
-
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Start"
-msgstr "Cl醨 Tosn"
+msgid "a number"
+msgstr "Uimhir f髇"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "On boot"
-msgstr "Ar T鷖"
+msgid "Swedish"
+msgstr ""
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid "Which %s driver should I try?"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Services and deamons"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "stopped"
-msgstr "ag stoppadh"
+msgid "Filesystem types:"
+msgstr "Cine醠 c髍ais-comhadlanna"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "running"
-msgstr "ag rith"
+msgid ", multi-function device on HP JetDirect"
+msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
+msgid "Northern Mariana Islands"
msgstr ""
-#: ../../services.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "none"
+msgstr "Ar bith"
+
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Freastala Print閕r"
+msgid "user :"
+msgstr "Ainm 鷖醝deora"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Scr韔s Print閕r"
+msgid "Please enter your password"
+msgstr "Aththrialaigh"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-#: ../../services.pm:1
-#, c-format
-msgid "Internet"
-msgstr "Idirl韔n"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Sabh醝l ar dhiosca flapach"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing"
-msgstr "Print閕r"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Roghnaigh rann le do thoil"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgid "Ghostscript referencing"
msgstr ""
-#: ../../services.pm:1
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "R韔mhchlar Tosnaithe a 鷖醝d "
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
+msgid "Move"
+msgstr "Bog"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
+msgid "Bootloader to use"
+msgstr "R韔mhchlar Tosnaithe a 鷖醝d "
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
+msgid "SMB server host"
+msgstr "freastala 髎tann SMB"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Freastala NIS"
+
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
#: ../../services.pm:1
#, c-format
msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
+msgid "4 billion colors (32 bits)"
+msgstr "4 billi鷑 dath (32 giot醝n)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid "Micronesia"
msgstr ""
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "License"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "This may take a moment to generate the keys."
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
+"Tharla earr醝d - n fhuaireadh aon gaireas ar a bhf閍dfa c髍ais-comhadlanna "
+"nua a cruthu. Ba ch骾r duit do chuid crua-earra a seice醝l le c鷌s an fadhb "
+"a aimsi"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+msgid "Starting the printing system at boot time"
msgstr ""
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Do you want to start the connection at boot?"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Processor ID"
msgstr ""
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Sound trouble shooting"
msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "Polish (qwerty layout)"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+msgid "activate now"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Host \"%s\", port %s"
msgstr ""
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
+msgid "This partition can't be used for loopback"
msgstr ""
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "File already exists. Use it?"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "received: "
msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Right Alt key"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgid "Gateway"
+msgstr "Inneal Geata:"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Print閕r"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Tonga"
msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid "Tunisia"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "Profile: "
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
+msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "old static device name used in dev package"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Ag feisti醠 pac醝ste %s"
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr "Is ann cheana don ainm 鷖醝deora seo"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Athraigh cine醠 ranna"
+
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "select perm file to see/edit"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Use group id for execution"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "Roghnagih an 鷖醝doer gne醩:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Gabon"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Eocharcl醨"
-
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "Fearannas NIS"
-#: ../../standalone.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
+msgid "Precise RAM size if needed (found %d MB)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Eirigh as Feisti"
-
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Feistigh c髍as"
+msgid "Provider dns 2 (optional)"
+msgstr "Roghanna Print閕r"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Configure services"
-msgstr "Cumraigh seirbhis"
+msgid "Boot device"
+msgstr "Gaireas boot醝l"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Cumraigh X"
+msgid "Which partition do you want to resize?"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Feistigh c骴 tosnaithe"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure networking"
-msgstr "Cumraigh gr閍s醤"
+msgid "A tool to monitor your logs"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Suimigh 鷖醝deoir"
+msgid "Djibouti"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Root password"
-msgstr "Gan pasfhocal"
+msgid "detected on port %s"
+msgstr "Pointe taca dublach %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Install system"
-msgstr "Feistigh c髍as"
+msgid "LPD"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Roghnaigh pac醝st ..."
+msgid "Graphics card: %s\n"
+msgstr "Carta Grafach: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "Form醝digh ranna"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Print閕r"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Roghnaigh rann le do thoil"
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Roghn Gr鷓a Pac醝st"
+
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Roghnaigh mh閍rchl醨"
+msgid "Extended partition not supported on this platform"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Roghnaigh rang feisti"
+msgid "ISDN Configuration"
+msgstr "Cumraigh ISDN"
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "羠d"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Hard drive detection"
+msgid "Internet Connection Sharing"
msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Configure mouse"
-msgstr "Cumraigh luch骻"
+msgid "Choose file"
+msgstr "T骻 comhad"
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "License"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Language"
-msgstr "Roghnaigh do theanga"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Ag d鷑adh s韔s an ghreas醤"
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "OK"
-msgstr "Ceart go Leor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Nasc Print閕r"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
-#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Mouse Gn醫h (PS/2)"
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--27-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Scr韔s Print閕r"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Roghnaigh carta grafachach"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Scrios ci"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Xpmac (installation display driver)"
+msgid "French Southern Territories"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "All data on this partition should be backed-up"
+msgstr "caillfear gach sonra ar an rann seo"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Freastala XFree %s le luasghear crua-earra 3D TRIALACH"
+msgid "Installing package %s"
+msgstr "Ag feisti醠 pac醝ste %s"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgid "Checking device and configuring HPOJ..."
msgstr ""
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s le luadghear crua-earra 3D"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Le breis ranna a bheith agat, dealaigh ceann amh醝n le bheith in ann "
+"ranns韓ithe a cruth"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Choose packages to install"
+msgstr "Roghnaigh pac醝st ..."
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
msgstr ""
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "Freastala XFree86: %s"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Cumraigh carta \"%s\" (%s) amhain"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Xinerama extension"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure all heads independently"
-msgstr "Cumraigh gach cinn ar leith"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "Cumra韔cht XFree"
+msgid "Bhutan"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Roghnaigh an m閕d cuimhne at id' charta grafachach"
+msgid "Network interface"
+msgstr "Cl醨閍dan Gr閍s醤"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+msgid "Reading printer data..."
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "Cumra韔chti gach cinn iolrach"
+msgid "Korean keyboard"
+msgstr "M閍rchl醨 Ch骾ris"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Roghnaigh freastala X"
+msgid "Not connected"
+msgstr "Cumraigh ADSL"
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "X server"
-msgstr "X freastala"
+msgid "Greek"
+msgstr "Greic韘"
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB n n韔s m"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Saint Kitts and Nevis"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Enable OF Boot?"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Sc醝le醤 VertRefresh: %s\n"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "path"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Mount point"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfig/main.pm:1
-#, fuzzy, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr "Coimead an cumra韔cht IP at ann"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Roghnachais"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Feistigh c髍as"
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Test"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolution"
-msgstr "R閕teach"
-
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Monitor"
-msgstr "Sc醝le醤"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Carta Grafach"
+msgid "Another one"
+msgstr "Idirl韔n"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "R醫a athnuachana ingearach"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "R醫a athnuachana cothrom醤ach"
+msgid "Colombia"
+msgstr "AN Chol骾m"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Leas"
-
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play"
+msgid "Reunion"
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "Roghnaigh sc醝le醤"
+msgid "Details"
+msgstr "Sonra"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "Carta Grafach: %s"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Roghnaigh R閕teach agus an m閕d dath"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolutions"
-msgstr "R閕teacha"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "Scr韔s Print閕r"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 billi鷑 dath (32 giot醝n)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Print閕r"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milli鷑 dath (24 giot醝n)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 m韑e dath (16 giot醝n)"
+msgid "Mongolia"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 m韑e dath (15 giot醝n)"
+msgid "Mounted\n"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 dath (8 giot醝n)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X ag t鷖"
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "An bhfuil seo ceart?"
+msgid "Restore Users"
+msgstr "Aisig comhad"
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d siocand"
+msgid "Encryption key for %s"
+msgstr "N mar a ch閕le na pasfhocail"
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detected hardware"
+msgstr "Le醡h an t-eolais crua-earra"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+msgid "Mauritius"
msgstr ""
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+msgid "Myanmar (Burmese)"
+msgstr ""
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Test of the configuration"
-msgstr "Trialaigh an cumra韔cht"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Enabling swap partition %s"
+msgstr "Ag form醝di rann %s"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "What norm is your TV using?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+msgid "Armenian (old)"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-"Is f閕dir linn do r韔mhaire a shocr le X a thosn i ndhiadh boot醝l.\n"
-"An dteasta韔nn uait go dtosn骹ar X nuair a aththosn韙ear an r韔mhaire?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X ag t鷖"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Tiom醤a XFree86: %s\n"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Freastala XFree86: %s\n"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "R閕teacha: %s\n"
-
-#: ../../Xconfig/various.pm:1
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Sc醝le醤 VertRefresh: %s\n"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Cuimhne grafach: %s kb\n"
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Carta Grafach: %s\n"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Sc醝le醤 VertRefresh: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sc醝le醤 HorizSync: %s\n"
+msgid "Monaco"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Sc醝le醤: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "Form醝di %s de %s teipithe"
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Gaireas luch骾ge: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Theip ar rann: %s"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Cine醠 luch骻: %s\n"
+msgid "Canada (cable)"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Leagan amach eocharchl醨a: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Uasgr醖aigh"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Roghnachais: %s"
+msgid "Workstation"
+msgstr "St醝si鷑 Oibre"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mount point: "
+msgid ""
+"Installing package %s\n"
+"%d%%"
msgstr ""
+"Ag feiste醝l pac醝ste %s\n"
+"%d%%"
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "Freastala"
-
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Kyrgyzstan"
msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Teast醝l an luch骻, le do thoil"
+msgid "With basic documentation"
+msgstr "羒t"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Mount point"
+msgid "Anacron is a periodic command scheduler."
msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Server"
-msgstr "Freastala"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Mount"
+msgid "Proxy should be http://..."
msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Unmount"
+msgid "South Africa"
msgstr ""
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "New"
-msgstr "nua"
-
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+msgid "Western Sahara"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Use ``%s'' instead"
+msgid "Etherboot Floppy/ISO"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "Cine醠"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "Roghnaigh gn韔mh"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Delete"
-msgstr "Scr韔s"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Create"
-msgstr "Cruthaigh"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Cine醠 c髍ais-comhadlanna"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Empty"
-msgstr "Folamh"
+msgid "Please test the mouse"
+msgstr "Teast醝l an luch骻, le do thoil"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "Fearannas NIS"
+msgid "Other Media"
+msgstr "Eile"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Droch comhad ch鷏taca"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Logitech MouseMan+"
+msgstr "Luch骻 Bus Logitech"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Malairte"
+msgid "Sector"
+msgstr "Teasc醤"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Journalised FS"
+msgid "Qatar"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Print閕r 醝ti鷏"
+msgid "LDAP Base dn"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"You can't select this package as there is not enough space left to install it"
msgstr ""
-"T rann m髍 FAT amh醝n agat.\n"
-"Molaim dhuit an rann sin a athmh閍d ar dt鷖\n"
-"(roghnaigh an rann agus br ar \"Athm閕digh\")"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Roghnaigh gn韔mh"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Wizard"
-msgstr "Dra韔doir"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Cruthaigh flapach boot醝l"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+msgid "Dialing mode"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Please make a backup of your data first"
+msgid "File sharing"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read carefully!"
-msgstr "L閕gh go curamach"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Encryption key (again)"
-msgstr ""
+msgid "Clean /tmp at each boot"
+msgstr "Glan /tmp nuair a thosnaigh an cor醝s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key"
+msgid "Malawi"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "N mar a ch閕le na pasfhocail"
+msgid "Please choose your type of mouse."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid "class of hardware device"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Cine醠 c髍as-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Type: "
-msgstr "Cine醠: "
+msgid "United Kingdom"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "ar bh鷖 %d, id %d\n"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "ag rith"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Cin閍l tabla rann: %s\n"
+msgid "default"
+msgstr "gn醫h"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diosca LVM %s\n"
+msgid "Indonesia"
+msgstr "An Indin閕s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Info: "
-msgstr "Eolas"
+msgid "France [SECAM]"
+msgstr "Fraince"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "C閕mseasamh: %s sorc骾r, %s ceann, %s teasc醤\n"
+msgid "restrict"
+msgstr "teorannaigh"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "M閕d: %s\n"
+msgid "must have"
+msgstr "riachtanas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Read-only"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Device: "
-msgstr "Gaireas: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "Senegal"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Ainm Fearannas"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Loopback file name: %s"
+msgid "access to administrative files"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Diosca RAID %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "M閕d smut醤 %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Level %s\n"
-msgstr "Leibh閍l %s\n"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid ", multi-function device on parallel port \\#%s"
msgstr ""
-"Rann tosaithe de ghn醫h\n"
-" (do thosn MS-DOS, n lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Loopback file(s):\n"
-" %s\n"
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Montserrat"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Mounted\n"
+msgid "Automatic dependencies"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Neamhform醝dithe\n"
+msgid "Swap"
+msgstr "Malairte"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Form醝dithe\n"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Athraigh cine醠 ranna"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sorc骾r %d go sorc骾r %d\n"
+msgid "Restore Other"
+msgstr "Aisig comhad"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s teasc醝n"
+msgid "TV card"
+msgstr "Carta Telef韘"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Size: %s"
-msgstr "M閕d: %s"
+msgid ", "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "T鷖: teasc醤 %s\n"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Scrios ci"
+
+#: ../../services.pm:1
#, c-format
-msgid "Name: "
-msgstr "Ainm: "
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litir Dioscthiom醤t DOS: %s (buile faoi thuraim)\n"
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "partition %s is now known as %s"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "R閕teacha: %s\n"
+msgid "Network Hotplugging"
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Copying %s"
+msgid "if set to yes, reports check result to tty."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Cruthaigh rann nua"
+msgid "Restore From CD"
+msgstr "Aisig dhiosca flapach"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "teip ar 'mkraid'"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Cruthaigh rann nua"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Nasc na hIdirl韔n agus cumra韔cht"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Beidh ort an r韔mhaire a aththosn sula nd閍nfar an athr"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Scr韔bhfar cl醨 diosca %s go dhiosca!"
+msgid "Latin American"
+msgstr "Mheirce Theas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Roghnaigh pac醝st ..."
+msgid "Japanese text printing mode"
+msgstr "Cumraigh gr閍s醤"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "What type of partitioning?"
-msgstr "C閚 sort rann at ort?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Roghnaigh Comhad"
#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr ""
+#, fuzzy, c-format
+msgid "Info: "
+msgstr "Eolas"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "m閕d smut醤"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Roghnachais: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "level"
-msgstr "leibh閍l"
+msgid "Please wait"
+msgstr "Fan tamall"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
#, c-format
-msgid "device"
-msgstr "feist"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Various"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Cr韔chnithe"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Roghachais mod鷌l:"
+msgid "The entered IP is not correct.\n"
+msgstr "An bhfuil seo ceart?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File already exists. Use it?"
+msgid "Ethernet Card"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "F韔r ainm"
+msgid "Info"
+msgstr "Eolas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Cine醠 c髍as-comhadlanna:"
+msgid "Install"
+msgstr "Feisti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "M閕d i MB: "
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Loopback file name: "
-msgstr ""
+msgid "Exit install"
+msgstr "Eirigh as Feisti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Loopback"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Scrios Freastala CUPS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "LVM name?"
-msgstr "ainm LVM?"
+msgid "Sun - Mouse"
+msgstr "Luch骻 - Sun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "new"
-msgstr "nua"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Roghnaigh RAID at ann le m閍d"
+msgid "Minimal install"
+msgstr "Eirigh as Feisti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Roghnaigh RAID at ann le m閍d"
+msgid "Ethiopia"
+msgstr "An Aet骾p"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "Ag bogadh rann..."
+msgid "Devanagari"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Moving"
-msgstr "Ag bogadh"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "C閚 tesc醤 ag a dteasta韔nn uait a bhogadh?"
+msgid "Total size: %d / %d MB"
+msgstr "M閕d ioml醤: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Sector"
-msgstr "Teasc醤"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "Table"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "C閚 diosca ag a dteasta韔nn uait a bhogadh?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Print閕r 醝ti鷏"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Move"
-msgstr "Bog"
+msgid "Disabling servers..."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "M閕d i MB: "
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Choose the new size"
-msgstr "Roghnaigh an m閕d nua"
+msgid "Installation of %s failed. The following error occured:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Resize"
-msgstr "Athm閕digh"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "caillfear gach sonra ar an rann seo"
+msgid "Network printer (TCP/Socket)"
+msgstr "Print閕r Gr閍s醤 (lpd)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition is not resizeable"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup User files..."
+msgstr "Droch comhad ch鷏taca"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Ag r韔mhadh teorainn na c髍ais-comhadlanna FAT"
+msgid "Install system"
+msgstr "Feistigh c髍as"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
+msgid "First DNS Server (optional)"
+msgstr "Cead Freastala DNS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "Ag cumraigh IDE"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Where do you want to mount device %s?"
+msgid "The setup has already been done, but it's currently disabled."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
+#: ../../any.pm:1
+#, c-format
+msgid "LILO/grub Installation"
+msgstr "Feisti LILO/grub"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Switching from ext2 to ext3"
+msgid "Israeli"
msgstr ""
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Which filesystem do you want?"
-msgstr "C閚 rann at uait?"
+msgid "load setting"
+msgstr "Ag form醝di"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "Athraigh cine醠 ranna"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Ag d鷑adh s韔s an ghreas醤"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+msgid "Floppy can be removed now"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Ag form醝di comhad 'loopback' %s"
+msgid "Truly minimal install"
+msgstr "Eirigh as Feisti"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
+msgid "Denmark"
+msgstr "An Danmhairg"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preference: "
-msgstr "Tosa韔cht: "
+msgid "Moving partition..."
+msgstr "Ag bogadh rann..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start sector: "
-msgstr "Teasc醤 tosasch: "
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP freastala SMP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "Cruthaigh rann nua"
+msgid "Test of the configuration"
+msgstr "Trialaigh an cumra韔cht"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Ag feisti醠 pac醝ste %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr "Athraigh RAID"
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr "Bain RAID"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Bain RAID"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add to LVM"
-msgstr "Cur le LVM"
+msgid "Andorra"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add to RAID"
-msgstr "Cur le RAID"
+msgid "Sierra Leone"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Format"
-msgstr "Form醝digh"
+msgid "Botswana"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "Eolas R-Phost"
+msgid "(default value: %s)"
+msgstr "Gn醫h"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Ag iarraidh an cl醨-ranna a tarrth醝l"
+msgid "Alternative test page (Letter)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-"Cur diosca flapach sa dioscthiomant\n"
-"Caillfear gach sonra ar an dhiosca seo"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Rabhadh"
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Roghnaigh freastala X"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Select file"
-msgstr "Roghnaigh Comhad"
+msgid "Swap partition size in MB: "
+msgstr "M閕d i MB do rhann malairte:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"N韑 an m閕d c閍nna ar an rann c鷏taca\n"
-"Lean ar aghaidh ar aon n髎?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Scriobh cl醨-ranna"
+msgid "No changes to backup!"
+msgstr "Droch comhad ch鷏taca"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr ""
+msgid "Formatted\n"
+msgstr "Form醝dithe\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Scriobh cl醨-ranna"
+msgid "Type of install"
+msgstr "Roghnaigh pac醝st a feisti ..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Scriobh cl醨-ranna"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
-"Le breis ranna a bheith agat, dealaigh ceann amh醝n le bheith in ann "
-"ranns韓ithe a cruth"
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "I can't add any more partition"
-msgstr "N f閕dir liom rann eile a cur isteach"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "All primary partitions are used"
-msgstr "T na ranna pr韔fa uilig 鷖醝dthe"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Eolas R-Phost"
+msgid "Automatic Steps Configuration"
+msgstr "Cumra韔cht St韑 Tosn"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Auto allocate"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Glan gach ceann"
+msgid "Barbados"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+msgid "Please select data to backup..."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "蒩laigh gan an cl醨-ranna a scr韔bh?"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Quit without saving"
-msgstr "蒩laigh gan sabh醝l"
+msgid "received"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Continue anyway?"
-msgstr "Lean ar aghaidh ar aon n髎?"
+msgid "/File/_New"
+msgstr "/Comhad/_Nua"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP freastala SMP"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Toggle to normal mode"
+msgid "IP Range End:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Undo"
-msgstr "Leas"
+msgid "High"
+msgstr "羠d"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+#: ../../any.pm:1
+#, c-format
+msgid "NoVideo"
+msgstr "GanBhide"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Roghnaigh gn韔mh"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Cruthaigh rann nua"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../diskdrake/removable.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Change type"
-msgstr "Athraigh cine醠 ranna"
+msgid "Local Printers"
+msgstr "Print閕r 醝ti鷏"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Search servers"
-msgstr "freastala DNS"
+msgid "Installation image directory"
+msgstr "蒳righ as cumra韔cht"
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "Fearannas NIS"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Server"
+msgstr "Freastala NIS"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Username"
-msgstr "Ainm 鷖醝deora"
+msgid "Port: %s"
+msgstr "Poirt"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
+msgid "Spain"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Deimni"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Idirl韔n"
+#: ../../any.pm:1
+#, c-format
+msgid "This user name has already been added"
+msgstr "Is ann cheana don ainm 鷖醝deora seo"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive.pm:1
#, fuzzy, c-format
-msgid "Which username"
-msgstr "Ainm 鷖醝deora"
+msgid "Choose a file"
+msgstr "Roghnaigh gn韔mh"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid "Apply"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Scr韔s Print閕r"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "SMBus controllers"
+msgid "Internet Connection Sharing currently disabled"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "USB controllers"
+msgid "San Marino"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "SCSI controllers"
-msgstr ""
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Belgium"
+msgstr "Belg醝ris"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "Kuwait"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "Roghnaigh an Bainist閛ir Fhuinneoga a 鷖醩d:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Joystick"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Gn醫h"
+msgid "First Time Wizard"
+msgstr "Ag 蒳righ as Dra韔d骾r\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Bridges and system controllers"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"Ta earraid ann, n韑 a fhios agam conas a cheart.\n"
+"Lean ort, ar do phriacal f閕n."
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Luch骻"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "Ag Pars醝l an comhad %s, fan tamall"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Idirl韔n"
+msgid "Taiwan"
+msgstr "羒t"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "Pakistan"
+msgstr "An Phacast醤"
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Webcam"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Carta Fuaim"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Eile"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "Carta Telef韘"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "M骴 f韘"
-
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "Cine醠"
+msgid "Permissions"
+msgstr "Leagan: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "DVD-ROM"
+msgid "Provider name (ex provider.net)"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "Leagan: %s\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "CDROM"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Danmharghais"
-
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Zip"
+msgid "Use the Windows partition for loopback"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Sabh醝l ar dhiosca flapach"
-
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Armenian (typewriter)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "Tiom醤a"
+msgid "Connection type: "
+msgstr "Athraigh cine醠 ranna"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "X ag t鷖"
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s le luadghear crua-earra 3D"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "India"
+msgstr "An India"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgid "Chad"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sound trouble shooting"
+msgid "Slovakia"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid "Singapore"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unkown driver"
+msgid "Cambodia"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "Monitor HorizSync: %s\n"
+msgstr "Sc醝le醤 HorizSync: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No known driver"
+msgid "Path"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No open source driver"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Trialaigh an cumra韔cht"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Suimigh 鷖醝deoir"
#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Trouble shooting"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+msgid "China (broadcast)"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "cumra韔cht"
+msgid "Use quota for backup files."
+msgstr "Droch comhad ch鷏taca"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Cumraigh print閕r"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Internet connection"
+msgstr "Nasc Print閕r"
+
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "No alternative driver"
+msgid "Welcome to the Open Source world."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "enable radio support"
+msgid "Bosnia and Herzegovina"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Radio support:"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Ag form醝di"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Teast醝l an luch骻, le do thoil"
-#: ../../harddrake/v4l.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Netherlands"
+msgstr "An Isilt韗"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Athraigh cine醠 ranna"
+msgid "Sending files by FTP"
+msgstr "Sabh醝l i gcomhad"
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Cuimhne Charta (DMA)"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr "Carta ISDN inmhe醤amach"
-#: ../../harddrake/v4l.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Gn醫h"
+msgid "Title"
+msgstr "Table"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid "WARNING"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Scr韔s Print閕r"
+msgid "Installing bootloader"
+msgstr "Feistigh c骴 tosnaithe"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Cr韔chnithe"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Do rogha? (gn醩 %s)"
+msgid "replay"
+msgstr "Athl骴aigh"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Droch rogha, aththrialaigh\n"
+msgid "detected %s"
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Re-submit"
+msgid "Virgin Islands (U.S.)"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
+msgid "Bad backup file"
+msgstr "Droch comhad ch鷏taca"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Do rogha? (gn醩 %s)"
-
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "Pipe into command"
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Roghnachais: %s"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Do rogha? (gn醩 %s)"
-
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Detecting devices..."
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Specify options"
-msgstr "Cumraigh roghanna"
+msgid "Click here to launch the wizard ->"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr ""
+msgid "Haiti"
+msgstr "H醝ti"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Description of the fields:\n"
+"\n"
msgstr ""
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which %s driver should I try?"
+msgid "the name of the CPU"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module options:"
-msgstr "Roghachais mod鷌l:"
+msgid "Refreshing printer data..."
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "You must also format %s"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "Be careful: this operation is dangerous."
msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(mod韑 %s)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "Cur isteach diosca sa dioscthiomant %s"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ag feist醝l tiomana do %s, carta %s"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "Freastala"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Le醡h an t-eolais crua-earra"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "An bhfuil comh閍dan %s agat?"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "Amharc"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do you have another one?"
-msgstr "An bhfuil ceann eile agat?"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fuair %s %s comh閍dan"
+msgid "Poland"
+msgstr "An Pholainn"
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
+msgid "Importance: %s\n"
+msgstr "T醔hacht: %s\n"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Form醝digh ranna"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "comma separated numbers"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Eile"
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%d comma separated strings"
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d comma separated numbers"
+msgid "SMBus controllers"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "Uimhir f髇"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "Connection timeout (in sec)"
+msgstr "Ainm Nasc"
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr ""
+msgid "Croatian"
+msgstr "Cr骾tis"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use dhcp"
-msgstr "鷖醝d dhcp"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Ag iarraidh an cl醨-ranna a tarrth醝l"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pptp"
-msgstr "鷖醝d pppoe"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Teip ar glaoch `fork': %s"
-#: ../../network/adsl.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "use pppoe"
-msgstr "鷖醝d pppoe"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Eile"
+msgid "/Help/_About..."
+msgstr "/C鷌di/_Faoi..."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Everything (no firewall)"
+msgid "Remove user directories before restore."
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Cumraigh Idirl韔n"
+
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "F00f bug"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
+msgid "XFree %s"
+msgstr "Freastala XFree86: %s"
-#: ../../network/drakfirewall.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "n fuaireathas c醨ta gr閍s醤"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "Freastala LDAP"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Freastala Print閕r"
-
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Domain Name Server"
+msgid "Domain Name:"
msgstr "Ainm Fearannas"
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Freastala"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Host name"
-msgstr "觭tAinm"
+msgid "On Floppy"
+msgstr "Sabh醝l ar dhiosca flapach"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "觭tAinm"
+msgid "Restore"
+msgstr "Aisig comhad"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Cumraigh gr閍s醤"
-
-#: ../../network/ethernet.pm:1
-#, fuzzy, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "C閚 cin閍l luch骻 at agat?"
+msgid "Looking for available packages..."
+msgstr "Ag curdach do na pac醝st at ar f醝l"
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Roghnaigh an cl醨閍dan ghr閍s醤"
+msgid "Init Message"
+msgstr "Sc閍l Tosn"
-#: ../../network/ethernet.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "Rescue partition table"
msgstr ""
-#: ../../network/ethernet.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Athraigh cine醠 ranna"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
+msgid "Cyprus"
+msgstr "An Chipir"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
+msgid "Remove from RAID"
+msgstr "Bain RAID"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "C閚 sort carta ISDN at uait?"
+msgid "Configuration Wizards"
+msgstr "Dra韔d骾r Cumra韔cht Gr閍s醤"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "ISDN connection"
msgstr "Cumraigh ISDN"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Abort"
-msgstr "Tobscoir"
+msgid "primary"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Continue"
-msgstr "Lean"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "I don't know"
-msgstr "N韑 fh韔s agam"
+msgid "Skip"
+msgstr "Scipe醝l"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Niue"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA/ PCMCIA"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "C閚 cin閍l c at uait?"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "important"
+msgstr "t醔hachtach"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Which protocol do you want to use?"
+msgid "Total Progress"
msgstr ""
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Trialaigh an cumra韔cht"
-
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Eorap (EDS11)"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Eorap (EDS11)"
+msgid "Users"
+msgstr "Ainm 鷖醝deora"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "Aruba"
msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "M骾deam ISDN seantrach"
-
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Carta ISDN inmhe醤amach"
+msgid "Preparing bootloader..."
+msgstr "Ag Ullmhaigh r韔mhchlar thosnaithe"
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "What kind is your ISDN connection?"
+msgid "Gateway (e.g. %s)"
msgstr ""
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Dra韔d骾r Cumra韔cht Gr閍s醤"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "蒳righ as cumra韔cht"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Cumra韔cht Gr閍s醤"
+msgid "The passwords do not match"
+msgstr "N mar a ch閕le na pasfhocail"
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+msgid "Examples for correct IPs:\n"
msgstr ""
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "Ag Tosnaigh CUPS"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Feisti"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Frequency (MHz)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Table"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+msgid "the number of the processor"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Dara Freastala DNS"
+msgid "Hardware clock set to GMT"
+msgstr "An bhfuil an clog cruaearrach ar GMT?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "First DNS Server (optional)"
-msgstr "Cead Freastala DNS"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "Ainm Fearannas"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Script-bhunaithe"
+msgid "Give a file name"
+msgstr "F韔r ainm"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Terminal-based"
-msgstr "Teirmin閍l-bhunaithe"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Change Cd-Rom"
+msgstr "Athraigh CD-ROM"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Login ID"
-msgstr "Ainm Login:"
+msgid "Paraguay"
+msgstr "Paraguay"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Phone number"
-msgstr "Uimhir f髇"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Ainm Nasc"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Dialup options"
-msgstr "Roghanna 'Dialup'"
+msgid "force"
+msgstr "fors醝l"
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "C閚 cin閍l luch骻 at agat?"
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Cumra韔cht Gr閍s醤"
+msgid "Exit"
+msgstr "Ext2"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
+msgid "Estonian"
+msgstr "East骾nis"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
+msgid "Add/Del Clients"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Network configuration"
-msgstr "Cumra韔cht Gr閍s醤"
+msgid "Choose the network interface"
+msgstr "Roghnaigh an cl醨閍dan ghr閍s醤"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown Model"
+msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "Nasc Print閕r"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
+"Rann tosaithe de ghn醫h\n"
+" (do thosn MS-DOS, n lilo)\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Roghnaigh na ranna at le form醝di"
+msgid "choose image"
+msgstr "Roghnaigh gn韔mh"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "ethernet card(s) detected"
+msgid "Firewalling configuration detected!"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LAN connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Cumraigh nasc ghr閍s醤"
+msgid "Connection name"
+msgstr "Ainm Nasc"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Cable connection"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "detected"
-msgstr "Scr韔s Print閕r"
+msgid "Updating package selection"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Nasc LAN"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "detected %s"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "ISDN connection"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Cumraigh nasc ghr閍s醤"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Normal modem connection"
-msgstr "Cumraigh nasc ghr閍s醤"
+msgid "the number of buttons the mouse has"
+msgstr "2 cnaip"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Detecting devices..."
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "Expert Mode"
-msgstr "M骴 Saineola"
-
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use auto detection"
-msgstr ""
+msgid "Replay"
+msgstr "Athl骴aigh"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Choose the profile to configure"
-msgstr "Roghnagih an 鷖醝doer gne醩:"
+msgid "Backup other files"
+msgstr "Droch comhad ch鷏taca"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
+msgid "No floppy drive available"
+msgstr "N韑 dioscthiom醤t flapach ar f醝l"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "Backup files are corrupted"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+msgid "TV norm:"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Cumraigh nasc ghr閍s醤"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "Cumraigh gr閍s醤"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Disconnect"
-msgstr "Cumraigh nasc ghr閍s醤"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Connect"
-msgstr "Lean"
+msgid "Cpuid family"
+msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Cumraigh nasc ghr閍s醤"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Lithuanian AZERTY (new)"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "C閚 diosca ag a dteasta韔nn uait a bhogadh?"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Bainteach le hIdirl韔n"
-
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Proxy should be http://..."
+msgid "Previous"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "Seach-FTP"
+msgid "Other OS (MacOS...)"
+msgstr "CO Eile (MunOS...)"
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Seach-HTTP"
+msgid "To activate the mouse,"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Cumraigh seach-freastala"
+msgid "Bringing up the network"
+msgstr "Ag tosn suas an ghr閍s醤"
-#: ../../network/network.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
+msgid "Screenshots will be available after install in %s"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "Gateway device"
-msgstr "Gaireas na hInneal Geata"
-
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "Tanzania"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DNS server"
-msgstr "freastala DNS"
+msgid "Computing FAT filesystem bounds"
+msgstr "Ag r韔mhadh teorainn na c髍ais-comhadlanna FAT"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"\n"
+"Backup Sources: \n"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Content of the file"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "Authentication LDAP"
+msgstr "Deimni LDAP"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
+msgid "Let me pick any driver"
msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Cruthaigh an diosca "
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Teast醝l an luch骻, le do thoil"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Cumra韔cht Gr閍s醤"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Profile "
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "transmitted"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "觭tAinm"
+msgid "Palestine"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask"
-msgstr ""
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "IP address"
-msgstr "Seoladh IP"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "Uath-IP"
+msgid "Here is the full list of keyboards available"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr " (tiom醝nt %s)"
+msgid "Theme name"
+msgstr "Comh. ainm"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Ag cumr gl閍s gr閍s醤 %s"
+msgid "/_Help"
+msgstr "/C_鷌di"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "the width of the progress bar"
msgstr ""
-#: ../../network/shorewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cook Islands"
msgstr ""
-#: ../../network/shorewall.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr ""
+msgid "Formatting partition %s"
+msgstr "Ag form醝di rann %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Account Password"
-msgstr "Pasfhocal"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "Ainm 鷖醝deora"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Account Login (user name)"
+msgid "Unselect fonts installed"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Ainm Nasc"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Athraigh cine醠 ranna"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Dialing mode"
-msgstr ""
+msgid "Cancel"
+msgstr "Cealaigh"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Roghnaigh mh閍rchl醨"
+msgid "Searching for configured scanners ..."
+msgstr "Print閕r 醝ti鷏"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Roghanna Print閕r"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Rothar"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Roghanna Print閕r"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "Uimhir f髇"
+msgid "Videocard"
+msgstr "M骴 f韘"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider name (ex provider.net)"
+msgid "\tBackups use tar and bzip2\n"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Your personal phone number"
-msgstr "Uimhir f髇"
+msgid "Remove Selected"
+msgstr "Scrios ci"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_1"
-msgstr "I/A_1 Carta"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Scr韔s Print閕r"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_0"
-msgstr "I/A_0 Carta"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Scr韔s Print閕r"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Card IO"
-msgstr "I/A Carta"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Cuimhne Charta (DMA)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ na Carta"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr ""
+msgid "Other"
+msgstr "Eile"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Cumra韔cht Idirl韔n."
+msgid "Default"
+msgstr "Gn醫h"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "Button 2 Emulation"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid "type1inst building"
msgstr ""
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "C閚 diosca ag a dteasta韔nn uait a bhogadh?"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Testing your connection..."
-msgstr "Cumraigh nasc ghr閍s醤"
+msgid "Abiword"
+msgstr "Tobscoir"
-#: ../../network/tools.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "choose image file"
+msgstr "Roghnaigh gn韔mh"
-#: ../../partition_table/raw.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Default)"
-msgstr "Gn醫h"
-
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP freastala SMP"
+msgid "X server"
+msgstr "X freastala"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Scr韔s Print閕r"
+msgid "Domain Admin User Name"
+msgstr "Ainm Fearannas"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "CUPS"
+msgid "There was an error while scanning for TV channels"
msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "US keyboard (international)"
+msgstr "Mearchl醨 US (idirnaisi鷑ta)"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mod韑 %s)"
+msgid "Not installed"
+msgstr "Eirigh as Feisti"
-#: ../../printer/data.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "LAN connection"
+msgstr "Nasc LAN"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPRng"
-msgstr ""
+msgid "/File/-"
+msgstr "/Comhad/-"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "Italian"
+msgstr "Iod醠ais"
-#: ../../printer/data.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "LPD"
+msgid "Basic"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ"
+msgid "Honduras"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
+msgid "pdq"
msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Card IO"
+msgstr "I/A Carta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unknown model"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Poirt"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "觭tAinm"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Cl醨閍dan Gr閍s醤"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "suimi鷌l"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "n fuaireathas c醨ta gr閍s醤"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", using command %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "\t-Network by FTP.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Russian (Yawerty)"
+msgstr "R鷌sis (Yawerty)"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "Gaireas Print閕r (URI)"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Earr醝dh ag scr韔bh comhad %s"
+msgid "/_Quit"
+msgstr "蒩laigh"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", multi-function device"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Graphics memory: %s kB\n"
+msgstr "Cuimhne grafach: %s kb\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid "access to compilation tools"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Gan Print閕r"
+msgid "Please select data to restore..."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Standard test page"
+msgstr "Uirlis gn醫h"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr ""
+msgid "Create"
+msgstr "Cruthaigh"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Print閕r 醝ti鷏"
+msgid "What"
+msgstr "Fan tamall"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Pipe job into a command"
+msgid "There was an error ordering packages:"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "Gaireas Print閕r (URI)"
+msgid "Bulgarian (BDS)"
+msgstr "Bulg醝ris"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Printer on NetWare server"
+msgid "Disable Server"
msgstr "Freastala Print閕r"
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Print閕r Gr閍s醤 (lpd)"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Scrios freastala lpd"
-
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Scrios Freastala CUPS"
+msgid "Filesystem encryption key"
+msgstr "Cine醠 c髍as-comhadlanna:"
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "Scr韔s Print閕r"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Print閕r 醝ti鷏"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Cumraigh print閕r"
+msgid "Save theme"
+msgstr "Feistigh c髍as"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Cl骴骾r"
+msgid "group"
+msgstr "Grupa na hOibre"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Scr韔s Print閕r"
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr "An Bhrasail"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+msgid "Auto Install"
+msgstr "Feisti"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Scr韔s Print閕r"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "Dra韔d骾r Cumra韔cht Gr閍s醤"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Removable media automounting"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "觭tainm Print閕r"
+msgid "Printing"
+msgstr "Print閕r"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "Cruthaigh rann nua"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "Tiom醤a"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgid "unknown"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "趕醝d fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "BOG DO ROTHAR!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Automatic IP"
+msgstr "Uath-IP"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
+
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Print閕r 醝ti鷏"
+msgid "Configuration of a remote printer"
+msgstr "Cumraigh Print閕r"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set this printer as the default"
+msgid "Moldova"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer options"
-msgstr "Roghanna Print閕r"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Printer manufacturer, model"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
+msgid "URL should begin with 'ftp:' or 'http:'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Scr韔s Print閕r"
+msgid "Add a new rule at the end"
+msgstr "Gan Print閕r"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer name, description, location"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Nasc Print閕r"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Gan Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do it!"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Close"
-msgstr "D鷑"
+msgid "Quit without writing the partition table?"
+msgstr "蒩laigh gan an cl醨-ranna a scr韔bh?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "Installing packages..."
+msgstr "Ag feisti醠 pac醝ste %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Gan Print閕r"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dutch"
+msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Normal Mode"
-msgstr "Luch骻 ar bith"
+msgid "The following packages need to be installed:\n"
+msgstr "Roghnaigh pac醝st ..."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Cumraigh gr閍s醤"
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "cumra韔cht"
+msgid "service setting"
+msgstr "suimi鷌l"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "Socraithe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "File is already used by another loopback, choose another one"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+msgid "Latvia"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Printing system: "
+msgid "No known driver"
msgstr ""
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
+
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Ag feisti醠 pac醝ste %s"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Cumraigh print閕r"
+msgid "Configure Local Area Network..."
+msgstr "Cumraigh gr閍s醤"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Cumraigh print閕r"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "C閚 rann at uait?"
+msgid "Information"
+msgstr "Taispe醤 Eolas"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Nasc Print閕r"
+msgid "No network card"
+msgstr "n fuaireathas c醨ta gr閍s醤"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Print閕r 醝ti鷏"
+msgid "Which filesystem do you want?"
+msgstr "C閚 rann at uait?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Ag feisti醠 pac醝ste %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 cnaip"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "R閕teacha: %s\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
+msgid "Detailed information"
+msgstr "Eolas R-Phost"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Starting the printing system at boot time"
+msgid "Malta"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "This floppy is not FAT formatted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paran骾d"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "Cumraigh gr閍s醤"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "high"
-msgstr "羠d"
+msgid "Graphic Card"
+msgstr "Carta Grafach"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Scr韔s Print閕r"
+msgid "Resizing Windows partition"
+msgstr "Ag r韔mhadh teorainn na c髍ais-comhadlanna FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "Cumraigh Print閕r"
+msgid "Provider dns 1 (optional)"
+msgstr "Roghanna Print閕r"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+msgid "Cameroon"
+msgstr "Camar鷑"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Cumraigh gr閍s醤"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Cumraigh gr閍s醤"
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Close"
+msgstr "D鷑"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "N韑 aon sc醝le醤 cumraithe"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Nasc Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr ""
+msgid "Calendar"
+msgstr "Feilire"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Cumraigh Idirl韔n"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Gan Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
+msgid "Iceland"
+msgstr "An 蚾slainn"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Transfer"
-msgstr ""
+msgid "stopped"
+msgstr "ag stoppadh"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+msgid "Whether the FPU has an irq vector"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+msgid "Expand Tree"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+msgid "Expert Mode"
+msgstr "M骴 Saineola"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "Roghanna Print閕r"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "n fuaireathas c醨ta gr閍s醤"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Droch comhad ch鷏taca"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "Freastala NIS"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printing test page(s)..."
+msgid "Zimbabwe"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Roghanna Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ag d鷑adh s韔s an ghreas醤"
+msgid "Please enter the host name or IP."
+msgstr "Teast醝l an luch骻, le do thoil"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Ag d鷑adh s韔s an ghreas醤"
+msgid "When"
+msgstr "Rothar"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ag d鷑adh s韔s an ghreas醤"
+msgid "Second DNS Server (optional)"
+msgstr "Dara Freastala DNS"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Ag d鷑adh s韔s an ghreas醤"
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "An Fhionlainn"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Arguments: (arg)\n"
"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "Color depth: %s\n"
+msgstr "Sc醝le醤 VertRefresh: %s\n"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+msgid "You can't unselect this package. It must be upgraded"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "Loading from floppy"
+msgstr "Aisig dhiosca flapach"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--27-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "Slovenia"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Nasc Print閕r"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "Ag feisti醠 pac醝ste %s"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "boot disk creation"
+msgstr "Trialaigh an cumra韔cht"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "觭tainm Print閕r"
+msgid "Change type"
+msgstr "Athraigh cine醠 ranna"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Photo test page"
-msgstr ""
+msgid "SILO Installation"
+msgstr "Roghnaigh rang feisti"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (A4)"
+msgid "Use CD/DVDROM to backup"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Alternative test page (Letter)"
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Uirlis gn醫h"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print"
-msgstr "Print閕r"
+msgid "paranoid"
+msgstr "Paran骾d"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No test pages"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Bain trial as ar韘"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "R閕teach"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Option %s out of range!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Option %s must be a number!"
+msgid "reconfigure"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Nasc Print閕r"
+msgid "Xinetd Service"
+msgstr "Freastala Print閕r"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -9781,542 +9666,534 @@ msgstr ""
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Cumraigh Idirl韔n"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Cumraigh Idirl韔n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "Scrios ci"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "C閚 sort print閕r at ort?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Nasc Print閕r"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Reading printer database..."
+msgid "Boot Protocol"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Scr韔s Print閕r"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "Diosca LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "An bhfuil seo ceart?"
+msgid "The package %s is needed. Install it?"
+msgstr "Roghnaigh pac醝st ..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "On boot"
+msgstr "Ar T鷖"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Scr韔s Print閕r"
+msgid "Bus identification"
+msgstr "Deimni"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Preparing printer database..."
+msgid "Please make a backup of your data first"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Location"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
msgstr "羒t"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Description"
-msgstr "Cuntas"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer"
-msgstr "Ainm Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Making printer port available for CUPS..."
+msgid "Eritrea"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Scr韔s Print閕r"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Morocco"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Ag feisti醠 pac醝ste %s"
+msgid "Which printer model do you have?"
+msgstr "C閚 sort print閕r at ort?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Ag feisti醠 pac醝ste %s"
+msgid "Add a new printer"
+msgstr "Gan Print閕r"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " All of your selected data have been "
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Ag feisti醠 pac醝ste %s"
+msgid "<-- Delete"
+msgstr "Scr韔s"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "Nepal"
+msgstr "Neipe醠"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "A command line must be entered!"
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Ainm Fearannas"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
+msgid "chunk size"
+msgstr "m閕d smut醤"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Pipe into command"
+msgid "commands before booting, or 'c' for a command-line."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "Pointe taca dublach %s"
+msgid "Problems installing package %s"
+msgstr "Ag feisti醠 pac醝ste %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "A valid URI must be entered!"
+msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Device URI"
-msgstr "Gaireas Print閕r (URI)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Port"
-msgstr "Poirt"
+msgid "Add a scanner manually"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "觭tainm Print閕r"
+msgid "Reload partition table"
+msgstr "Scriobh cl醨-ranna"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The port number should be an integer!"
+msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "觭tainm Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Roghanna Print閕r NetWare"
+msgid "Boot"
+msgstr "Root"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Tuner type:"
+msgstr "Athraigh cine醠 ranna"
+
+#: ../../help.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid "\"Menu\" key"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Nasc Print閕r"
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
+msgid "Security Administrator:"
msgstr "Scr韔s Print閕r"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your login"
+msgstr "Aththrialaigh"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "NCP server name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Print Queue Name"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Freastala Print閕r"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Fonts copy"
+msgstr "Formadaigh flapach"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "Automated"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Roghanna Print閕r NetWare"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Save packages selection"
+msgstr "Roghn Gr鷓a Pac醝st"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Ag form醝di comhad 'loopback' %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Scr韔s Print閕r"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Grupa na hOibre"
+msgid "use pptp"
+msgstr "鷖醝d pppoe"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Comh. ainm"
+msgid "Choose which services should be automatically started at boot time"
+msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "IP freastala SMP"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "freastala 髎tann SMB"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "Cumraigh gr閍s醤"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Choose a mirror from which to get the packages"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Roghanna Print閕r SMB (Fuinneoga 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "C閚 tesc醤 ag a dteasta韔nn uait a bhogadh?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Ag d鷑adh s韔s an ghreas醤"
+msgid "Do you want to click on this button?"
+msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Bahamas"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Scr韔s Print閕r"
+msgid "Manual configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Scr韔s Print閕r"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "觭tAinm"
+msgid "search"
+msgstr "faigh"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
+msgid "Xpmac (installation display driver)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Cumraigh Idirl韔n"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Gaireas Print閕r (URI)"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "C閚 cin閍l luch骻 at agat?"
+msgid "Unknown/Others"
+msgstr "Gn醫h"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "C閚 cin閍l luch骻 at agat?"
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Roghnachais"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid ""
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detected"
+msgstr "Scr韔s Print閕r"
+
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10326,941 +10203,839 @@ msgid ""
"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "Tarrth醝l"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Print閕r 醝ti鷏"
+msgid "Remote Printers"
+msgstr "Scr韔s Print閕r"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Print閕r 醝ti鷏"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Gaireas Print閕r (URI)"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Print閕r 醝ti鷏"
+msgid "Choose an existing LVM to add to"
+msgstr "Roghnaigh RAID at ann le m閍d"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Gan Print閕r"
+msgid "xfs restart"
+msgstr "teorannaigh"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "觭tainm Print閕r"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "n韑 aon ranna saora ann"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Print閕r Gr閍s醤 (lpd)"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Pointe taca dublach %s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "Ainm Fearannas"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "Pointe taca dublach %s"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "F醝lte go %s"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Scr韔s Print閕r"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Print閕r"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Cumraigh print閕r"
+msgid "Cuba"
+msgstr "C鷅a"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Print閕r 醝ti鷏"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid "Belize"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
+msgid "Kernel Boot Timeout"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "C閚 cin閍l luch骻 at agat?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
+msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Ung醨ais"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP Server"
+msgstr "Freastala LDAP"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Gan Print閕r"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Gan Print閕r"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Scr韔s Print閕r"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr ""
+msgid "Choose your country"
+msgstr "Roghnaigh mh閍rchl醨"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid "Standalone Tools"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "觭tainm Print閕r"
+msgid "Where"
+msgstr "Rothar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "but not matching"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Scrios Freastala CUPS"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Cumraigh C醨ta PCMCIA"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Scrios ci"
+#: ../../common.pm:1
+#, c-format
+msgid "kdesu missing"
+msgstr "kdesu ar iarraidh"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Scrios ci"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Suimigh 鷖醝deoir"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Christmas Island"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Installation of bootloader failed. The following error occured:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "partition %s"
+msgstr "rann %s"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Paranoid"
+msgstr "Paran骾d"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Print閕r 醝ti鷏"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Scrios ci"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Glan diosca ina ioml醤"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Default)"
+msgstr "Gn醫h"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Cumraigh ADSL"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Cumraigh gr閍s醤"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Cr韔chnithe"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP freastala SMP"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Scr韔s Print閕r"
+msgid "permissions"
+msgstr "rann %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Cumraigh Idirl韔n"
+#, c-format
+msgid "<- Previous"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Print閕r"
+msgid "Internet Connection Sharing configuration"
+msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
+msgid "Toggle between flat and group sorted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "Themes"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Roghnachais: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "Cumraigh Idirl韔n"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "How is the printer connected?"
+msgid "Sudan"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
+msgid "Polish (qwertz layout)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
msgstr ""
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+msgid "Portuguese"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Loopback file name: "
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "if set to yes, check open ports."
+msgid "DNS server address should be in format 1.2.3.4"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "srathach"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, report check result by mail."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "This directory should remain within the root filesystem"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Feistigh c骴 tosnaithe"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Roghnaigh an m閕d cuimhne at id' charta grafachach"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "LVM name?"
+msgstr "ainm LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Fuair %s %s comh閍dan"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Feisti"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Gan Print閕r"
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ na Carta"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
+#, c-format
+msgid "logdrake"
+msgstr "logdrake"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Roghnaigh na ranna at le form醝di"
+
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid "LILO with text menu"
+msgstr "LILO le chl醨 teacs"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Cr韔chnithe"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Lithuanian AZERTY (old)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "Brazilian (ABNT-2)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "Roghnaigh rang feisti"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Open"
+msgstr "/Comhad/_Oscail"
+
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Cruthaigh flapach boot醝l"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "Hungary"
+msgstr "An Ung醝r"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Bain trial as ar韘"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Cumraigh Idirl韔n"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
-msgstr ""
+msgid "New Zealand"
+msgstr "An Nua-Sh閍lainn"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "C閚 cin閍l luch骻 at agat?"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Gan Print閕r"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
+msgid "GB"
+msgstr "GB"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Please give a user name"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Enable CD Boot?"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Cumraigh nasc ghr閍s醤"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11268,725 +11043,531 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Roghnaigh cumra韔cht an freastala"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nil dothain spas malartu chun insealbhu, chuir leis an spas"
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Roghnachais"
+msgid "%s on %s"
+msgstr "Poirt"
-#: ../../security/level.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
+msgid "Which is your timezone?"
+msgstr "C閚 ceann do chrois ama"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+msgid "Guinea"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "C閚 diosca ag a dteasta韔nn uait a bhogadh?"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paran骾d"
+msgid "Icon"
+msgstr "Dealbh"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "羠d"
+msgid "Please choose what you want to backup"
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "羠d"
+msgid "256 colors (8 bits)"
+msgstr "256 dath (8 giot醝n)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Bocht"
+msgid "Read-write"
+msgstr "L閍mh-Scr韔bh"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr ""
+msgid "Size: %s\n"
+msgstr "M閕d: %s\n"
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname: "
+msgstr "Ainm 鷖醝deora"
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "蒳righ as le do thoil agus Crtl-Alt-BackSpace a 鷖醝d"
+msgid "Chunk size %s\n"
+msgstr "M閕d smut醤 %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "N韑 dioscthiom醤t flapach ar f醝l"
+msgid "ADSL connection"
+msgstr "Nasc LAN"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Floppy can be removed now"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Couldn't access the floppy!"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Error!"
+msgstr "Earr醝d"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
+msgid "cable connection detected"
+msgstr "Cumraigh nasc ghr閍s醤"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Write Config"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Tuairaisc Fabht"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "蒳righ as cumra韔cht"
+msgid "Resize"
+msgstr "Athm閕digh"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "IP Range End:"
+msgid "Dominica"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "IP Range Start:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "Freastala NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Ainm Fearannas"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Resolution: %s\n"
+msgstr "R閕teacha: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Broadcast Address:"
+msgid "matching"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Subnet Mask:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "Routers:"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Netmask:"
+msgid "The following packages are going to be removed"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "Subnet:"
+msgid "Connect to the Internet"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+msgid "Use existing partitions"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Ag cumraigh IDE"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Scr韔s"
-
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<-- Edit Client"
+msgid "Canadian (Quebec)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Gaireas luch骾ge: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Allow Thin Clients"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Thin Client"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Cine醠: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
-msgstr ""
+msgid "We are now going to configure the %s connection."
+msgstr "Cumraigh nasc ghr閍s醤"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Suimigh 鷖醝deoir"
+msgid "MandrakeExpert Corporate"
+msgstr "Saineola"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Roghnaigh Comhad"
+msgid "Write protection"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Scr韔s"
+msgid "You've not selected any font"
+msgstr "Scrios ci"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "Language"
+msgstr "Roghnaigh do theanga"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer model selection"
+msgstr "Nasc Print閕r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build All Kernels -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Cumraigh ADSL"
+#: ../../common.pm:1
+#, c-format
+msgid "%d seconds"
+msgstr "%d siocand"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No kernel selected!"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Boot ISO"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "cumra韔cht"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Floppy"
+msgid "Photo test page"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "Custom disk partitioning"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
+"The following printers\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+"%s%s\n"
+"are directly connected to your system"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: %s"
+msgstr "Cine醠: "
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+msgid "Slovakian (QWERTY)"
+msgstr "Sl骲aicis (QWERTY)"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Suimigh 鷖醝deoir"
+msgid "No Sound Card detected!"
+msgstr "Cumraigh ADSL"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Mouse Port"
+msgstr "Gaireas luch骾ge"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "Freastala NIS"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Start Server"
+msgid "Ftp Server"
msgstr "Freastala NIS"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Freastala Print閕r"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Freastala Print閕r"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Cumraigh Idirl韔n"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Ag form醝di comhad 'loopback' %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Suimigh 鷖醝deoir"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Feisti"
-
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "Comhghairdeas!"
-
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Cruthaigh flapach boot醝l"
+msgid "the type of bus on which the mouse is connected"
+msgstr "2 cnaip"
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, c-format
-msgid "manual"
+msgid "Uganda"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Cumra韔cht St韑 Tosn"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Athl骴aigh"
-
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Cumra韔cht Iar-feist"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "Earr醝d"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
+msgid "Comoros"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"Description:\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
"\n"
"\n"
+"Press OK to continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "M骴 Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Luch骻 Gn醫h 3-cnaipe"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "C閚 cin閍l luch骻 at agat?"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Comh. ainm"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -11998,4546 +11579,5009 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Restore"
-msgstr "Aisig comhad"
+msgid "Network & Internet"
+msgstr "Cl醨閍dan Gr閍s醤"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Socraigh c髍as chomhad"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "蒳righ as cumra韔cht"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "cumra韔cht"
+msgid "Sharing of local scanners"
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Cumra韔cht Gr閍s醤"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Cumra韔cht Gr閍s醤"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Cumra韔cht Gr閍s醤"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name missing!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Total Progress"
+msgid "with /usr"
msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Sabh醝l i gcomhad"
+msgid "Network"
+msgstr "Cl醨閍dan Gr閍s醤"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Droch comhad ch鷏taca"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "T an pasfhocal seo ro-shimpl"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Droch comhad ch鷏taca"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Sl骲aicis (QWERTZ)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Droch comhad ch鷏taca"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+" Transfer \n"
+"Now"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Roghnaight do theangam le do thoil."
+msgid "Use daemon"
+msgstr "Ainm 鷖醝deora"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#, c-format
+msgid "Authentication"
+msgstr "Deimni"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Roghnaight do theangam le do thoil."
+msgid "Additional CUPS servers: "
+msgstr "IP freastala SMP"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Roghnaight do theangam le do thoil."
+msgid "Where do you want to mount %s?"
+msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Roghnaigh pac醝st ..."
+msgid "Restore Via Network"
+msgstr "Aisig comhad"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "An Alg閕r"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "M閕d-Initrd"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Teacs"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Previous"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Cl醨 Tosn"
+msgid "Setting Default Printer..."
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Droch comhad ch鷏taca"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Aisig comhad"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Ainm: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Scriobh cl醨-ranna"
+msgid "Generating preview ..."
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "srathach"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Socraithe"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Aisig comhad"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path or Module required"
+msgid "Kenya"
+msgstr "An Ch閕nia"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Ainm 鷖醝deora"
+msgid "Installing mtools packages..."
+msgstr "Ag feisti醠 pac醝ste %s"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "Ainm 鷖醝deora"
+msgid "You must specify a root partition"
+msgstr "N韑 aon ranna agat!"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Pasfhocal"
+msgid "first step creation"
+msgstr "Trialaigh an cumra韔cht"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "觭tAinm"
+msgid "Select a scanner model"
+msgstr "Roghnaigh carta grafachach"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Aisig comhad"
+msgid "Drakbackup Configuration"
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "S醔h醝l mar..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Scriobh cl醨-ranna"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Uath-Logann"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Aisig dhiosca flapach"
+msgid "System configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Aisig comhad"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Scrios ci"
+msgid "Configuring printer ..."
+msgstr "Cumraigh print閕r"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "C閚 cin閍l luch骻 at agat?"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Aisig comhad"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Aisig comhad"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Feistigh c髍as"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Eile"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "C閚 cin閍l luch骻 at agat?"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Aisig dhiosca flapach"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Droch comhad ch鷏taca"
+msgid "Remove"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "Lesotho"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Teast醝l an luch骻, le do thoil"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Droch comhad ch鷏taca"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "C閚 cin閍l luch骻 at agat?"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Droch comhad ch鷏taca"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "T"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Cote d'Ivoire"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid "Which protocol do you want to use?"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "Cumra韔cht Gr閍s醤"
+msgid "Restore Progress"
+msgstr "Aisig comhad"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid " Successfuly Restored on %s "
+msgid "Estonia"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " All of your selected data have been "
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Backup files are corrupted"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Cealaigh"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "Add"
+msgstr "Suim"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Nasc na hIdirl韔n agus cumra韔cht"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "C閚 cin閍l luch骻 at agat?"
+msgid " Error while sending mail. \n"
+msgstr "Earr醝d ag l閍mh comhad %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Eocharcl醨"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the connection you want to configure"
+msgstr "Roghnaigh na ranna at le form醝di"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Ag cumr gl閍s gr閍s醤 %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by rsync.\n"
+msgid "activated"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "C閚 cin閍l luch骻 at agat?"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Ag c鷕dach pac醝st le h鷄sgr醖"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid "Mount point: "
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\t-Tape \n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "With X"
+msgstr "Fan tamall"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Cumra韔chti gach cinn iolrach"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "No browser available! Please install one"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../Xconfig/main.pm:1
+#, fuzzy, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
+"%s"
+msgstr "Coimead an cumra韔cht IP at ann"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Ainm Fearannas"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Roghnachais"
+msgid "Sharing of local printers"
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Print閕r 醝ti鷏"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Folamh"
+
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save via %s on host: %s\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\t\tErase=%s"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
+msgid "Where do you want to mount device %s?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " (multi-session)"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Gaireas luch骾ge: %s\n"
+msgid "Interface \"%s\""
+msgstr "suimi鷌l"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "RW"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "1 button"
+msgstr "1 Cnaipe"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Delete hard drive tar files after backup.\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- Other Files:\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "M髍"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "Do rogha? (gn醩 %s)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Gan Print閕r"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Leas"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Interface %s"
+msgstr "suimi鷌l"
+
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Cumraigh luch骻"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
+msgid "Choose the mount points"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Select user manually"
+msgid "OK"
+msgstr "Ceart go Leor"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Yugoslavian (latin)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup Users"
+msgid "Installing"
+msgstr "Ag Feisti"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Socraigh c髍as chomhad"
+msgid "Is this an install or an upgrade?"
+msgstr "Feistigh n uasgr醖aigh ?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Roghnaight do theangam le do thoil."
+msgid "ISDN card"
+msgstr "Carta ISDN inmhe醤amach"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "on Tape Device"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "on CDROM"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "across Network"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "on Hard Drive"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "C閚 cin閍l luch骻 at agat?"
+msgid "Printer on remote CUPS server"
+msgstr "Scrios Freastala CUPS"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Roghachais mod鷌l:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "When"
-msgstr "Rothar"
+msgid "delete"
+msgstr "Scr韔s"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Where"
-msgstr "Rothar"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "Fan tamall"
+msgid "DHCP host name"
+msgstr "觭tAinm"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Send mail report after each backup to:"
+msgid "Please choose which serial port your mouse is connected to."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Ainm 鷖醝deora"
+#: ../../security/level.pm:1
+#, c-format
+msgid "Poor"
+msgstr "Bocht"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "monthly"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "weekly"
+msgid "Grenada"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Unsafe"
+msgstr "Baolach"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "hourly"
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s teasc醝n"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "HardDrive / NFS"
+msgid "No"
+msgstr "N韑"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "Guadeloupe"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Teast醝l an luch骻, le do thoil"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Roghnaight do theangam le do thoil."
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Roghnaight do theangam le do thoil."
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "R醫a athnuachana ingearach"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Roghnaight do theangam le do thoil."
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Ag tosn ar c閕m `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Luch骻 MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Droch comhad ch鷏taca"
+msgid "Removing %s ..."
+msgstr "R閕teacha: %s\n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Roghnaigh Comhad"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "An N韌ir"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
+msgid "No printer"
+msgstr "Gan Print閕r"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Roghnaigh rann le do thoil"
+msgid "alert configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Roghnaigh rann le do thoil"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "Roghanna Print閕r NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " Erase Now "
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Roghnaigh rann le do thoil"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "General"
+msgstr "Gn醫h"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Roghnaigh rann le do thoil"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Roghnaigh rann le do thoil"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Suimigh 鷖醝deoir"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "C閚 leagan amach at ar d'eocharchl醨sa"
+msgid "Network configuration (%d adapters)"
+msgstr "Cumra韔cht Gr閍s醤"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "Ceart go Leor"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Gan pasfhocal"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Aththrialaigh"
+msgid "Do you want to use aboot?"
+msgstr "C閍rd a theasta韔nn uait a dh閍namh?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Aththrialaigh"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belar鷌sis"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Teast醝l an luch骻, le do thoil"
+msgid "Move files to the new partition"
+msgstr "Cruthaigh rann nua"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "Scriobh cl醨-ranna"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
+msgid "Pitcairn"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Grupa na hOibre"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Droch comhad ch鷏taca"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Ainm 鷖醝deora"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO le Chl醨 Graphaice"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Dealaigh Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Ag meast"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
+msgid "You can't unselect this package. It is already installed"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Scrios ci"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Lean ar aghaidh ar aon n髎?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Roghnaight do theangam le do thoil."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Ag curdach do na pac醝st at ar f醝l"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Cumraigh roghanna"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Vanuatu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Droch comhad ch鷏taca"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Roghn Gr鷓a Pac醝st"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Earr醝d ag l閍mh comhad %s"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "Roghnaigh rang feisti"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+msgid "Use for loopback"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "use pppoe"
+msgstr "鷖醝d pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Droch comhad ch鷏taca"
+msgid "Moving files to the new partition"
+msgstr "Cruthaigh rann nua"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Droch comhad ch鷏taca"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "Freastala XFree %s le luasghear crua-earra 3D TRIALACH"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Droch comhad ch鷏taca"
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "R閍mhioa韔cht"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Transfer"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Droch comhad ch鷏taca"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (Meirice)"
#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup system files..."
-msgstr ""
+#, fuzzy, c-format
+msgid "More Options"
+msgstr "Roghachais mod鷌l:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
-msgstr ""
+msgid "Afghanistan"
+msgstr "An Afghanast醝n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not erasable media!"
+msgid "Burundi"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "L閕gh go curamach"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Bain trial as ar韘"
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Port"
+msgstr "Poirt"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s not responding"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Earr醝d ag oscailt %s do scr韔bh: %s"
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Gan pasfhocal"
+msgid "The encryption keys do not match"
+msgstr "N mar a ch閕le na pasfhocail"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "R閕teacha"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Scrios ci"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Cumra韔cht Gr閍s醤"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "Ag Tosnaigh CUPS"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Roghnaigh rann le do thoil"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Scr韔s"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"Is f閕dir linn do r韔mhaire a shocr le X a thosn i ndhiadh boot醝l.\n"
+"An dteasta韔nn uait go dtosn骹ar X nuair a aththosn韙ear an r韔mhaire?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
+msgid "Build the disk"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Cumraigh nasc ghr閍s醤"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
+msgid "Status:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr "M骴 Coras"
+msgid "HTTP proxy"
+msgstr "Seach-HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "Freastala NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Eorap (EDS11)"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "Earr醝d"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
+msgid "allow \"su\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Roghn Gr鷓a Pac醝st"
+msgid "Australia"
+msgstr "srathach"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Cumraigh carta \"%s\" (%s) amhain"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Roghnaigh rang feisti"
+msgid "Level"
+msgstr "leibh閍l"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "GanBhide"
+msgid "Change the printing system"
+msgstr "Cumraigh gr閍s醤"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "Cumraigh seirbhis"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "mount failed: "
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "Freastala XFree86: %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "Iomha"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Backup %s to %s.old"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Cruthaigh rann nua"
+msgid "Selected All"
+msgstr "Roghnaigh Comhad"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Feistigh c髍as"
+msgid "Webmin Service"
+msgstr "Seirbish"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "M骴 Lilo/Grub"
+msgid "device"
+msgstr "feist"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Yaboot mode"
-msgstr "M骴 Yaboot"
+msgid "All"
+msgstr "Gach Rud"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>E"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "C閚 rann at uait?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Comhad/_Ealu"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greece"
+msgstr "Greic韘"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_Comhad"
+msgid "An error occurred"
+msgstr "Tharla earr醝d"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Cumra韔cht St韑 Tosn"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "No browser available! Please install one"
+msgid "Tamil (Typewriter-layout)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid "manual"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Eirigh as Feisti"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Eirigh as Feisti"
-
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Standalone Tools"
+msgid "Printer manufacturer, model, driver"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "Poirt"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Fan tamall"
+msgid "Printer on NetWare server"
+msgstr "Freastala Print閕r"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Tabhair na M閕d Cuimhne as MB"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Roghn Gr鷓a Pac醝st"
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "F韔r ainm"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Application:"
-msgstr "Deimni"
+msgid "done"
+msgstr "Cr韔chnithe"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Dra韔d骾r Cumra韔cht Gr閍s醤"
+msgid "Please uncheck or remove it on next time."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Cl骴骾r"
+msgid "Higher"
+msgstr "羠d"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr ""
+msgid "Choose the partitions you want to format"
+msgstr "Roghnaigh na ranna at le form醝di"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Urpmi"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Comh. ainm"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Scr韔s Print閕r"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Luch骻"
+msgid "Can't find %s on %s"
+msgstr "Earr醝d ag oscailt %s do scr韔bh: %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "sainordaitheach"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Japanese 106 keys"
+msgstr "Se醦ainis (106 eochair)"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Bainteach le hIdirl韔n"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Synchronization tool"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Ag 蒳righ as Dra韔d骾r\n"
+msgid "Delete selected rule"
+msgstr "Scrios ci"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Bainteach le hIdirl韔n"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr ""
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Scrios Freastala CUPS"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
+msgid "Insert a floppy in %s"
+msgstr "Cur isteach diosca sa dioscthiomant %s"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "DHCP Client"
+msgid "Maldives"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "compact"
+msgstr "compact"
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
#, c-format
-msgid "Gateway"
-msgstr "Inneal Geata:"
+msgid "1 minute"
+msgstr "1 noim閍d"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Connection type: "
-msgstr "Athraigh cine醠 ranna"
+msgid "on channel %d id %d\n"
+msgstr "ar bh鷖 %d, id %d\n"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Profile: "
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "activate now"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "deactivate now"
+msgid "Firewall"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "DHCP client"
+msgid "Area:"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Started on boot"
+msgid "(E)IDE/ATA controllers"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr ""
+msgid "Printer Server"
+msgstr "Freastala Print閕r"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Adapter %s: %s"
+msgid "Disconnection from the Internet complete."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "LAN Configuration"
-msgstr "cumra韔cht"
+msgid "Custom configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN configuration"
-msgstr "Cumraigh ADSL"
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Pierre and Miquelon"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Connect..."
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disconnect..."
+msgid "Portugal"
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr "An bhfuil ceann eile agat?"
+
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Not connected"
-msgstr "Cumraigh ADSL"
+msgid ", printing to %s"
+msgstr "Earr醝dh ag scr韔bh comhad %s"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Connected"
-msgstr "Ainm Nasc"
+msgid "Assign host name from DHCP address"
+msgstr "Teast醝l an luch骻, le do thoil"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Toggle to normal mode"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Interface:"
-msgstr "suimi鷌l"
-
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Gateway:"
-msgstr "Inneal Geata:"
+msgid "Generic"
+msgstr "Gn醫h"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Apply"
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Sorc骾r %d go sorc骾r %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "New profile..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Dra韔doir..."
+msgid "Which disk do you want to move it to?"
+msgstr "C閚 diosca ag a dteasta韔nn uait a bhogadh?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Status:"
+msgid "Display logo on Console"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Type:"
-msgstr "Cine醠: "
+msgid "Windows Domain"
+msgstr "Fearannas NIS"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Internet access"
+msgid "Interface %s (on network %s)"
msgstr "suimi鷌l"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Hostname: "
-msgstr "Ainm 鷖醝deora"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "Cumraigh gr閍s醤"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "State"
-msgstr "Cl醨 Tosn"
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Driver"
-msgstr "Tiom醤a"
+msgid "INFO"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Protocol"
+msgid "Wallis and Futuna"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Interface"
-msgstr "Cl醨閍dan Gr閍s醤"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Configure Internet Access..."
-msgstr "Cumraigh gr閍s醤"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Wait please"
+msgid "There are no scanners found which are available on your system.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+"No additional information\n"
+"about this service, sorry."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr ""
+msgid "Is this correct?"
+msgstr "An bhfuil seo ceart?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Del profile..."
+msgid "Marshall Islands"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Cumra韔cht Gr閍s醤"
+msgid "Windows (FAT32)"
+msgstr "Dealaigh Windows(TM)"
-#: ../../standalone/drakedm:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Gan pasfhocal"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choosing a display manager"
+msgid "if set to yes, report unowned files."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
+"N韑 aon ranna malairte agat\n"
+"\n"
+"x1Lean ar aghaidh ar aon n髎?"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "觭tainm Print閕r"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr "Teip ar glaoch `fork': %s"
+msgid "Suriname"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+msgid "Enable ACPI"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
+msgid "Graphical Environment"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "Build the disk"
+msgid "Gibraltar"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Output"
-msgstr "Aschur"
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "Ag Tosnaigh CUPS"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "Scr韔s"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "Scr韔s mod鷌l"
+msgid "Filesystem type: "
+msgstr "Cine醠 c髍as-comhadlanna:"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Nasc Print閕r"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Add a module"
-msgstr "Suimigh Mod鷌l"
+msgid "Vietnam"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "omit scsi modules"
-msgstr "Luch骻 ar bith"
+msgid "/_Fields description"
+msgstr "Cuntas"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "if needed"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "omit raid modules"
-msgstr "Scr韔s mod鷌l"
+msgid "Help"
+msgstr "/C_鷌di"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Your personal phone number"
+msgstr "Uimhir f髇"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "force"
-msgstr "fors醝l"
+msgid "Which size do you want to keep for Windows on"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Ainm 鷖醝deora"
+
+#: ../../help.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "Roghnachais Saineoia"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "kernel version"
-msgstr "leagan `kernel'"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Roghanna Print閕r SMB (Fuinneoga 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "default"
-msgstr "gn醫h"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "General"
-msgstr "Gn醫h"
+msgid "mkinitrd optional arguments"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
+
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "boot disk creation"
+msgid "Protocol for the rest of the world"
msgstr "Trialaigh an cumra韔cht"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print test pages"
+msgstr "觭tainm Print閕r"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "64 MB or more"
+msgstr "64 MB n n韔s m"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Size"
-msgstr "M閕d"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Module name"
-msgstr "Ainm Mod鷏"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Eirigh as Feisti"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Not formatted\n"
+msgstr "Neamhform醝dithe\n"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Sc閍l Tosn"
+msgid "PXE Server Configuration"
+msgstr "蒳righ as cumra韔cht"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Feisti"
+msgid "Backup the system files before:"
+msgstr "Droch comhad ch鷏taca"
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Install & convert Fonts"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "Cead dioscthiom醤t flapach"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Scr韔s Print閕r"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Comhad/_Ealu"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Roghnaigh Comhad"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unselected All"
+msgid "Choose the new size"
+msgstr "Roghnaigh an m閕d nua"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "here if no."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
+msgid "Faroe Islands"
msgstr ""
#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "Feistigh c髍as"
+#, c-format
+msgid "Restart XFS"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Print閕r"
+msgid "Please enter the directory to save to:"
+msgstr "Teast醝l an luch骻, le do thoil"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Tobscoir"
+msgid "Model name"
+msgstr "Ainm Mod鷏"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Oifig"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "An Alb醝n"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Roghnaigh na ranna at le form醝di"
+msgid "Normal Mode"
+msgstr "Luch骻 ar bith"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "About"
-msgstr "Tobscoir"
+msgid "Printer connection type"
+msgstr "Nasc Print閕r"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Font List"
-msgstr ""
+msgid "No network adapter on your system!"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "蒳righ as cumra韔cht"
+msgid "Network %s"
+msgstr "Cl醨閍dan Gr閍s醤"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Uninstall Fonts"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Form醝digh ranna"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "done"
-msgstr "Cr韔chnithe"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "teorannaigh"
+msgid "Connect %s"
+msgstr "Lean"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Suppress Fonts Files"
+msgid "Restarting CUPS..."
msgstr ""
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Restart XFS"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Ag d鷑adh s韔s an ghreas醤"
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "Pointe taca dublach %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "type1inst building"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Cumra韔cht Idirl韔n."
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Gn醫h"
+
+#: ../../help.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Quit"
+msgstr "蒩laigh"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts conversion"
+msgid "Myanmar"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "True Type install done"
+msgid "Auto allocate"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Check bad blocks?"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Ag Ullmhaigh feisti"
+msgid "Other MultiMedia devices"
+msgstr "Eile"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Formadaigh flapach"
+msgid "No remote machines"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search for fonts in installed list"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "Deimni NIS"
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "could not find any font in your mounted partitions"
+msgid "Internet Connection Sharing currently enabled"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "Teip ag cuardach %s"
-
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Card IO_0"
+msgstr "I/A_0 Carta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "United Arab Emirates"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Search installed fonts"
-msgstr ""
+msgid "Card IO_1"
+msgstr "I/A_1 Carta"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
+msgid "Thailand"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid "Kazakhstan"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_newt.pm:1
#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Ag feisti醠 pac醝ste %s"
+msgid "Mandrake Linux Installation %s"
+msgstr "Feisti Linux-Mandrake %s"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
+msgid "Thai keyboard"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Configuring..."
-msgstr "Ag cumraigh IDE"
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr "Roghanna 'Dialup'"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
+msgid ""
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Polish"
+msgstr "Polainnais"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Bainteach le hIdirl韔n"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid "\t-Network by webdav.\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "The DHCP start range"
+msgid "Netmask"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Gan Print閕r"
+msgid "No hard drives found"
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP freastala SMP"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech CC Series"
+msgstr "Luch骻 Logitech CC"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP freastala SMP"
+#: ../../mouse.pm:1
+#, c-format
+msgid "2 buttons"
+msgstr "2 cnaip"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+msgid "What kind is your ISDN connection?"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "n fuaireathas c醨ta gr閍s醤"
-
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Label"
+msgstr "Lip閍d"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Sabh醝l ar dhiosca flapach"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "Printer auto-detection"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "Which of the following is your ISDN card?"
+msgstr "C閚 sort carta ISDN at uait?"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "No (experts only)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Cumraigh ADSL"
+msgid "Msec"
+msgstr "Luch骻"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "N韑 aon sc醝le醤 cumraithe"
-
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+msgid "Number of capture buffers:"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Do rogha? (gn醩 %s)"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"%s\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network interface"
-msgstr "Cl醨閍dan Gr閍s醤"
+msgid "French"
+msgstr "Francaigh"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "Ceich韘 (QWERTY)"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "Pointe taca dublach %s"
#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "suimi鷌l"
+msgid "Net Device"
+msgstr "Freastala Print閕r"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
+msgid "Summary"
+msgstr "Coimri"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Freastala Print閕r"
+msgid "Next"
+msgstr "Teacs"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+msgid "You can't install the bootloader on a %s partition\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Welcome.\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing"
+msgid "Puerto Rico"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Enabling servers..."
+msgid ""
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "dismiss"
+msgid "Lithuanian \"number row\" QWERTY"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_any.pm:1
#, c-format
-msgid "reconfigure"
+msgid ""
+"The following packages will be removed to allow upgrading your system: %s\n"
+"\n"
+"\n"
+"Do you really want to remove these packages?\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "enable"
+msgid "Anguilla"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "Fearannas NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
"\n"
-"What would you like to do?"
+"- User Files:\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
+msgid "Antarctica"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Nasc na hIdirl韔n agus cumra韔cht"
+msgid "Mount options"
+msgstr "Roghachais mod鷌l:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr ""
+msgid "Jamaica"
+msgstr "Iam醝ce"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "disable"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"What would you like to do?"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
+msgid "Please wait, preparing installation..."
+msgstr "Fan tamall, ag ullmhaigh feisti"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "Czech (QWERTZ)"
+msgstr "Ceich韘 (QWERTZ)"
-#: ../../standalone/drakhelp:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Track network card id (useful for laptops)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Path"
+msgid "The port number should be an integer!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "Grupa na hOibre"
+msgid "You must choose an image file first!"
+msgstr "Gaireas Print閕r (URI)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Ainm 鷖醝deora"
+msgid "Restore from Hard Disk."
+msgstr "Aisig dhiosca flapach"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Roghn Gr鷓a Pac醝st"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Add to LVM"
+msgstr "Cur le LVM"
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "DNS server"
+msgstr "freastala DNS"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Trinidad and Tobago"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use group id for execution"
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Use owner id for execution"
+msgid "simple"
+msgstr "simpl"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Clear all"
+msgstr "Glan gach ceann"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "No test pages"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+msgid "Adapter %s: %s"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-GID"
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Set-UID"
+msgid "Unknown model"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "sticky-bit"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "Poirt"
+msgid "authentication"
+msgstr "Deimni"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Leagan: %s\n"
+msgid "Backup Now"
+msgstr "Socraigh c髍as chomhad"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
+msgid "/_File"
+msgstr "/_Comhad"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "browse"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Edit current rule"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "edit"
+msgid "Mayotte"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Scrios ci"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "delete"
-msgstr "Scr韔s"
+msgid "Searching for scanners ..."
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Gan Print閕r"
+msgid "Partitioning"
+msgstr "Print閕r"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Suimigh Mod鷌l"
+msgid "Russia"
+msgstr "Ruisl韘"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "ethernet card(s) detected"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Down"
-msgstr "Cr韔chnithe"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Syslog"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Up"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Not enough free space for auto-allocating"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Socraigh pasfhocal root"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "rann %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "group"
-msgstr "Grupa na hOibre"
+msgid "Internet connection configuration"
+msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
+msgstr ""
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "user"
-msgstr "Ainm 鷖醝deora"
+msgid "/_About..."
+msgstr "/C鷌di/_Faoi..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "path"
+msgid "Bengali"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr "Tosa韔cht: "
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Wizard..."
+msgstr "Dra韔doir..."
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, c-format
+msgid "Services: %d activated for %d registered"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "Cruthaigh an diosca "
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(mod韑 %s)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
+msgstr "Grupa na hOibre"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Cruthaigh flapach boot醝l"
+msgid "Printer host name or IP"
+msgstr "觭tainm Print閕r"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "Print閕r 醝ti鷏"
+msgid "Show current interface configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "Forbairt"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "Cr韔chnithe"
+
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "蒳righ as cumra韔cht"
+msgid "Web Server"
+msgstr "Freastala"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Chile"
+msgstr "An tSile"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "suimi鷌l"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "C閚 cin閍l luch骻 at agat?"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "蒳righ as cumra韔cht"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "蒳righ as cumra韔cht"
+msgid "Add/Del Users"
+msgstr "Suimigh 鷖醝deoir"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Fan tamall, ag ullmhaigh feisti"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
+msgid "Settings"
+msgstr "Roghnachais"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Roghachais mod鷌l:"
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Roghachais mod鷌l:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Scr韔s Print閕r"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
+msgid "Backup user files"
+msgstr "Droch comhad ch鷏taca"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr "Gn醫h"
+msgid "New"
+msgstr "nua"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Aisig dhiosca flapach"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Cumraigh ADSL"
+msgid "The following printer was auto-detected. "
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Scr韔s Print閕r"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Gaireas Print閕r (URI)"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Ioruais"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Nasc Print閕r"
+msgid "Searching for new scanners ..."
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Roghnaigh gn韔mh"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Roghnaigh gn韔mh"
+msgid "select path to restore (instead of /)"
+msgstr "C閚 cin閍l luch骻 at agat?"
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Cumraigh seirbhis"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
+msgid "China"
+msgstr "An tS韓"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "C閚 cin閍l luch骻 at agat?"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
+msgid "Georgia"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Roghnaigh sc醝le醤"
+msgid "Reading data of installed printers..."
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Erase Now "
+msgstr ""
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr "Freastala"
+
+#: ../../install_any.pm:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Feistigh c髍as"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Cur isteach diosca sa dioscthiomant %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr ""
+
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "feist"
+msgid "Please Wait... Applying the configuration"
+msgstr "Trialaigh an cumra韔cht"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+# FIXME
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "the color of the progress bar"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "F醝le go GRUB, an roghn骾r Chor醝s "
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the height of the progress bar"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "the width of the progress bar"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "觭tAinm"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "Ecuador"
+msgstr "Eacuad髍"
+
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Suimigh 鷖醝deoir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "text box height"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "text width"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Blaosc"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Browse"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Comh. ainm"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "final resolution"
-msgstr "R閕teach"
+msgid "Package not installed"
+msgstr "Eirigh as Feisti"
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "Trialaigh an cumra韔cht"
+msgid "Become a MandrakeExpert"
+msgstr "Saineola"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "American Samoa"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "Protocol"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "No TV Card detected!"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Have a nice day!"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Cumraigh Idirl韔n"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "There was an error while scanning for TV channels"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Scanning for TV channels"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Area:"
+msgid "You can't select/unselect this package"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "Warning"
+msgstr "Rabhadh"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote host name"
+msgstr "觭tAinm"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "deactivate now"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Newzealand"
+msgid "access to X programs"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Fraince"
+msgid "Computing the size of the Windows partition"
+msgstr "Cruthaigh rann nua"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Eorap"
+msgid "Italy"
+msgstr "Iod醠ais"
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Eorap"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "Ainm Print閕r"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "China (broadcast)"
+msgid "disable"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Japan (cable)"
+msgid "error unmounting %s: %s"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japan (broadcast)"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Canada (cable)"
+msgid "Cayman Islands"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "USA (cable-hrc)"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select model manually"
+msgstr "Scr韔s Print閕r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (cable)"
+msgid "Format"
+msgstr "Form醝digh"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "USA (broadcast)"
+msgid "Various"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d siocand"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "PDQ"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Gn醫h"
-
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "unknown"
+msgid "Albanian"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Scr韔s Print閕r"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run config tool"
+msgid "Lithuania"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Cumraigh luch骻"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Taispe醤 Eolas"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Le醡h an t-eolais crua-earra"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "leagan `kernel'"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Compact"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
+msgid "Detected model: %s %s"
msgstr "Pointe taca dublach %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Chomaid 羒ti鷏"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/C鷌di/_Faoi..."
+#: ../../pkgs.pm:1
+#, c-format
+msgid "maybe"
+msgstr "b'fh閕dir"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Tuairaisc Fabht"
+msgid "Panama"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Roghnaigh carta grafachach"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Sc醝le醤"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 m韑e dath (16 giot醝n)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Cuntas"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/C_鷌di"
+msgid "Size: %d KB\n"
+msgstr "M閕d: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "蒩laigh"
+msgid "Remove fonts on your system"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Scr韔s Print閕r"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Scr韔s Print閕r"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "X ag t鷖"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Scr韔s Print閕r"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Roghanna"
+msgid "Please enter the directory to save:"
+msgstr "Teast醝l an luch骻, le do thoil"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
+msgid "Not enough partitions for RAID level %d\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connected"
+msgstr "Ainm Nasc"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Ag form醝di"
+msgid "USB printer \\#%s"
+msgstr "Gan Print閕r"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "the number of the processor"
+msgid "Macedonian"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Print閕r Gr閍s醤 (lpd)"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Comhad/_S醔h醝l"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the name of the CPU"
+msgid "Mali"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Ainm: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 cnaip"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 cnaip"
+msgid "No details"
+msgstr "Sonra"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "an-dheas"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Model name"
-msgstr "Ainm Mod鷏"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Preview"
+msgstr "feist"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Model"
-msgstr "Luch骻"
+msgid "Remote Control"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Cuimhne Charta (DMA)"
+msgid "Please select media for backup..."
+msgstr "Roghnaight do theangam le do thoil."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "Freastala XFree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Media class"
+msgid "Allow Thin Clients"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid "Georgian (\"Russian\" layout)"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "leibh閍l"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Roghanna"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Form醝digh"
+msgid "Your printer model"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Cumraigh Idirl韔n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Cl醨 Tosn"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid "Load the drivers for your usb devices."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Is FPU present"
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Danmharghais"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "Gaireas Print閕r (URI)"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Israel"
+msgstr "Iosrael"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
+msgid "French Guiana"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "add a rule"
+msgstr "Suimigh Mod鷌l"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid "A command line must be entered!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Module"
-msgstr "Luch骻"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Gaireas na hInneal Geata"
+msgid "Transfer printer configuration"
+msgstr "Cumraigh Idirl韔n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "old static device name used in dev package"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Roghnaigh Comhad"
+msgid "%s (Port %s)"
+msgstr "Poirt"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Droch comhad ch鷏taca"
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid "Accept user"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Roghnaigh liebh閍l sl醤d醝l"
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
+#, c-format
+msgid "Server"
+msgstr "Freastala"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Droch rogha, aththrialaigh\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
+msgid "Heard and McDonald Islands"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid "No alternative driver"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
+msgid "Toggle to expert mode"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
+msgid "Gateway address should be in format 1.2.3.4"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "m閕d smut醤"
+msgid "Looking at packages already installed..."
+msgstr "Roghnaigh pac醝st ..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Driver"
+msgstr "Tiom醤a"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Deimni"
+msgid "Printer on remote lpd server"
+msgstr "Scrios freastala lpd"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Bogomips"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+msgid "No mouse"
+msgstr "Luch骻 ar bith"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Channel"
-msgstr "Cealaigh"
+msgid "Germany"
+msgstr "Gearm醝nis"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Austria"
+msgstr "srathach"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Bus"
+msgid "Collapse Tree"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "Cumra韔cht Iar-feist"
+
+#: ../../steps.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "Configure networking"
+msgstr "Cumraigh gr閍s醤"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Alternative drivers"
+msgid "Where do you want to install the bootloader?"
msgstr ""
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "C閚 leagan amach at ar d'eocharchl醨sa"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
+msgid "DHCP client"
msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+msgid "Restoring from file %s failed: %s"
msgstr ""
-#: ../../standalone/livedrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Athraigh CD-ROM"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Luch骻 Logitech (srathach, s閍n cin閍l C7)"
-#: ../../standalone/localedrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Gaireas na hInneal Geata"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save as.."
-msgstr "S醔h醝l mar..."
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Aththrialaigh"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Cumra韔cht St韑 Tosn"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "Automatic time synchronization"
+msgstr "Cumraigh ADSL"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "load setting"
-msgstr "Ag form醝di"
-
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "suimi鷌l"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Freastala Print閕r"
+msgid "Card model:"
+msgstr "Cuimhne Charta (DMA)"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Seirbish"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Thin Client"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "SSH Server"
+msgid "Start Server"
msgstr "Freastala NIS"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "Freastala NIS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Turkmenistan"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Freastala Print閕r"
+msgid "All remote machines"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "Freastala NIS"
+msgid "Install themes"
+msgstr "Feistigh c髍as"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Ainm Fearannas"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
+msgid "Espanol"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+msgid "Preparing installation"
+msgstr "Ag Ullmhaigh feisti"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Edit selected host/network"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Cumraigh Lilo/Grub"
+msgid "Add User -->"
+msgstr "Suimigh 鷖醝deoir"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mail alert"
+msgid "Nauru"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Ag Pars醝l an comhad %s, fan tamall"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "Ag Ullmhaigh feisti"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Content of the file"
+msgid "Auto-detect printers connected directly to the local network"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Calendar"
-msgstr "Feilire"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "LAN configuration"
+msgstr "Cumraigh ADSL"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Choose file"
-msgstr "T骻 comhad"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Cuimhne Charta (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "but not matching"
+msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "matching"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Settings"
-msgstr "Roghnachais"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "A tool to monitor your logs"
+msgid "Iranian"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "search"
-msgstr "faigh"
-
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Croatia"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Syslog"
-msgstr ""
+msgid "Gateway:"
+msgstr "Inneal Geata:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Messages"
-msgstr "sc閍la"
+msgid "Add server"
+msgstr "Suimigh 鷖醝deoir"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "User"
-msgstr "Ainm 鷖醝deora"
+msgid "Remote printer name"
+msgstr "Scr韔s Print閕r"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/C鷌di/_Faoi..."
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Roghnachais/Teast醝l"
+msgid "Device: "
+msgstr "Gaireas: "
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Comhad/-"
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printerdrake"
+msgstr "Cl骴骾r"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Comhad/S醔h醝l _Mar"
+msgid "License agreement"
+msgstr "Cead鷑as"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "Roghachais mod鷌l:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Comhad/_S醔h醝l"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Comhad/_Oscail"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr "Gan Print閕r"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Choose the applications that will support the fonts:"
+msgstr "Roghnaigh na ranna at le form醝di"
+
+#: ../../steps.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Comhad/_Nua"
+msgid "Configure X"
+msgstr "Cumraigh X"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Show only for the selected day"
+msgid "Turkish (traditional \"F\" model)"
msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Emulate third button?"
-msgstr ""
+msgid "Congratulations!"
+msgstr "Comhghairdeas!"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "C閚 cin閍l luch骻 at agat?"
+msgid "Use owner id for execution"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Lean"
+msgid "Down"
+msgstr "Cr韔chnithe"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Raw printer (No driver)"
+msgstr ""
+
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Cumraigh nasc ghr閍s醤"
+msgid "Install rpm"
+msgstr "Feisti"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "received"
-msgstr ""
+msgid "Time remaining "
+msgstr "Am fagtha "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "UK keyboard"
+msgstr "M閍rchl醨 UK"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "received: "
+msgid "Unmount"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "sent: "
+msgid "Uninstall Fonts"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Chomaid 羒ti鷏"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr ""
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Cumraigh Idirl韔n"
+msgid "German (no dead keys)"
+msgstr "Gearm醝nis (gach meachl醨 marbh)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Athraigh cine醠 ranna"
-
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "32 thousand colors (15 bits)"
+msgstr "32 m韑e dath (15 giot醝n)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Athraigh cine醠 ranna"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Athraigh cine醠 ranna"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Cumraigh nasc ghr閍s醤"
+msgid "Reboot"
+msgstr "Root"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
+msgid "Gambia"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Athraigh cine醠 ranna"
+msgid "Mandrake Control Center"
+msgstr "Bainteach le hIdirl韔n"
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Sabh醝l i gcomhad"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Cumra韔cht Gr閍s醤"
+msgid "Remember this password"
+msgstr "Gan pasfhocal"
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Print閕r 醝ti鷏"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Teast醝l an luch骻, le do thoil"
-
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "Use the free space on the Windows partition"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Print閕r 醝ti鷏"
+msgid "%s found on %s, configure it automatically?"
+msgstr "An dteasta靜nn uait print閕r a chumr?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "This machine"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Scrios ci"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Scrios ci"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Suimigh 鷖醝deoir"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "Tiom醤a XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "趕醝d sp醩 saor"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Scr韔s Print閕r"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"\n"
+" DrakBackup Report \n"
+"\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "Choose the packages you want to install"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid "Papua New Guinea"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Print閕r"
-
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Serbian (cyrillic)"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Print閕r 醝ti鷏"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Print閕r 醝ti鷏"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Print閕r"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Ag Cruthaigh diosca thosnaithe"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Print閕r 醝ti鷏"
+msgid "Wait please, testing your connection..."
+msgstr "Cumraigh nasc ghr閍s醤"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+msgid "Bringing down the network"
+msgstr "Ag d鷑adh s韔s an ghreas醤"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Ainm Login:"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Gaireas boot醝l"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "DHCP Client"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid "dismiss"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Print閕r 醝ti鷏"
+msgid "Printing/Scanning on \"%s\""
+msgstr "Ag d鷑adh s韔s an ghreas醤"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Scr韔s Print閕r"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "Scr韔s mod鷌l"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "The %s is unsupported"
-msgstr ""
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet Connection Configuration"
+msgstr "Nasc na hIdirl韔n agus cumra韔cht"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Poirt"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ", "
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid " ("
-msgstr ""
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "N韑 aon gaireas ghreas醤 san do chor醩!"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "An dteasta靜nn uait print閕r a chumr?"
+msgid "I can't find any room for installing"
+msgstr "N f閕dir liom rann eile a cur isteach"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Pointe taca dublach %s"
+msgid "Default printer"
+msgstr "Print閕r 醝ti鷏"
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Athraigh RAID"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Add user"
+msgstr "Suimigh 鷖醝deoir"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "Diosca RAID %s\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+msgid "Liberia"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Roghnaigh mh閍rchl醨"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
+msgid "Format partitions"
+msgstr "Form醝digh ranna"
-#: ../../share/advertising/03-software.pl:1
-#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Cumraigh ADSL"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Scr韔s Print閕r"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "Print閕r"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "Loopback file name: %s"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Cumraigh Idirl韔n"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "C閚 cin閍l luch骻 at agat?"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../help.pm:1
#, c-format
-msgid "A customizable environment"
+msgid "Delay before booting the default image"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Roghnaigh rann le do thoil"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Ainm 鷖醝deora"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Droch comhad ch鷏taca"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Configure"
+msgstr "Cumraigh"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Roghnaigh carta grafachach"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Nasc Print閕r"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Cruthaigh rann nua"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Print閕r 醝ti鷏"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Pointe taca dublach %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
+msgid "Azerbaijan"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (Meirice)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+msgid "How is the printer connected?"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Saineola"
+msgid "Security level"
+msgstr "Roghnaigh liebh閍l sl醤d醝l"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "R閕teach"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Seirbish"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Saineola"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -16550,10 +16594,6 @@ msgid ""
msgstr ""
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "St醝si鷑 Oibre"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "St醝si鷑 Cluich"
@@ -16626,10 +16666,6 @@ msgid ""
msgstr ""
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "St醝si鷑 Gnome"
@@ -16648,10 +16684,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Forbairt"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr ""
@@ -16724,36 +16756,57 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""
#: ../../share/compssUsers:999
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Nasc na hIdirl韔n agus cumra韔cht"
+
#, fuzzy
-msgid "Audio station"
-msgstr "St醝si鷑 Ilmhe醤ach"
+#~ msgid "Configure the connection"
+#~ msgstr "Cumraigh gr閍s醤"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr ""
+#, fuzzy
+#~ msgid "Disconnect"
+#~ msgstr "Cumraigh nasc ghr閍s醤"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "St醝si鷑 Cluich"
+#~ msgid "Connect"
+#~ msgstr "Lean"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr ""
+#, fuzzy
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr "Cumraigh nasc ghr閍s醤"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "St醝si鷑 Cluich"
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "C閚 diosca ag a dteasta韔nn uait a bhogadh?"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Carta Grafach: %s"
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Bainteach le hIdirl韔n"
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
+#, fuzzy
+#~ msgid "Write %s"
+#~ msgstr "Freastala XFree86: %s"
+
+#, fuzzy
+#~ msgid "Audio station"
+#~ msgstr "St醝si鷑 Ilmhe醤ach"
+
+#, fuzzy
+#~ msgid "Video station"
+#~ msgstr "St醝si鷑 Cluich"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "St醝si鷑 Cluich"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Carta Grafach: %s"
#, fuzzy
#~ msgid "Printer sharing"
@@ -16867,10 +16920,6 @@ msgstr ""
#~ "t LILO"
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Uasgr醖aigh"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "An bhfuil t ag iarraidh an cumra韔cht a thrial?"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
index d5e69d038..0ca65ef73 100644
--- a/perl-install/share/po/gl.po
+++ b/perl-install/share/po/gl.po
@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
"PO-Revision-Date: 2001-03-17 19:17+0100\n"
"Last-Translator: Jes鷖 Bravo 羖varez (mdk) <jba@pobox.com>\n"
"Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
@@ -12,953 +12,1482 @@ msgstr ""
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
+msgstr "Examinando as partici髇s para atopar os puntos de montaxe"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "\t\tErase=%s"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "Impresora de rede (TCP/Socket)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "Insira un disquete na unidade %s"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Launch userdrake"
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"A t醔oa de partici髇s de rescate non ten\n"
+"o mesmo tama駉. 緾ontinuar de calquera xeito?"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Which username"
+msgstr "Nome de usuario"
#: ../../any.pm:1
#, c-format
+msgid "Which type of entry do you want to add?"
+msgstr "縌ue tipo de entrada desexa engadir?"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Restore partition table"
+msgstr "T醔oa de partici髇s de rescate"
+
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "On CUPS server \"%s\""
+msgstr "IP do servidor CUPS"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Configuraci髇 trala instalaci髇"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Use ``%s'' no seu lugar"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Tipo"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
+msgid "Sri Lanka"
msgstr ""
-#: ../../any.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
msgstr ""
-"Este paquete ten que ser actualizado\n"
-"縀st seguro de que quere deseleccionalo?"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "Personalizado"
+msgid "Gateway device"
+msgstr "Dispositivo de pasarela"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Engadir usuario"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS iniciando"
+msgid "Ethernetcard"
+msgstr "Tarxeta Ethernet"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "M醝s"
+msgid "Parameters"
+msgstr "Par醡etros"
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Esta a lista completa de teclados dispo駃bles"
+msgid "Auto-detect"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Escolla o seu tipo de rato."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface:"
+msgstr "Interface:"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Resoluci髇"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Clase de instalaci髇"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "Montar"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "All languages"
-msgstr "Escoller a lingua"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Use Unicode by default"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
+"Semella que o sistema non est conectado internet.\n"
+"Probe reconfigurando a conexi髇."
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Pode escoller outras linguas que estar醤 dispo駃bles trala instalaci髇"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Escolla a lingua que desexe usar."
+msgid "Belarus"
+msgstr "Bielorruso"
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Escolla o xestor de fiestras para executar:"
+msgid "Error writing to file %s"
+msgstr "Erro escribindo ficheiro %s"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "Escolla o usuario por defecto:"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd 鷖ase para monitorizar o estado da bater韆 e rexistralo a trav閟 do\n"
+"syslog. Tam閚 pode usarse para apagar a m醧uina cando a bater韆 est baixa."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "緿esexa usar aboot?"
+msgid "Use tape to backup"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be installed"
+msgstr "Vanse instalar os seguintes paquetes"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"P骴ese configurar o ordenador para que se autentique automaticamente\n"
-"como un usuario. Se non quere usar esta caracter韘tica, prema o bot髇\n"
-"cancelar."
+msgid "CUPS configuration"
+msgstr "Configuraci髇 da LAN"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autologin"
-msgstr "Login autom醫ico"
+msgid "Hong Kong"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Icon"
-msgstr "Icona"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Shell"
-msgstr "Shell"
+msgid "Moving"
+msgstr "Desprazando"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Password (again)"
-msgstr "Contrasinal (de novo)"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Password"
-msgstr "Contrasinal"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "Nome de usuario"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Conexi髇 Internet\n"
+"\n"
+"Vaise configurar a s鷄 conexi髇 internet/rede.\n"
+"Se non quere usar a detecci髇 autom醫ica, desmarque a caixa.\n"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Real name"
-msgstr "Nome real"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Accept user"
-msgstr "Aceptar usuario"
+msgid "Lebanon"
+msgstr ""
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Done"
-msgstr "Feito"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "Sector"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "detectouse %s"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Seleccione un ficheiro"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Armenio (fon閠ico)"
+
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "The DHCP start ip"
msgstr ""
-"Introduza un usuario\n"
-"%s"
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Add user"
-msgstr "Engadir usuario"
+msgid "256 kB"
+msgstr "256 KB"
#: ../../any.pm:1
#, c-format
-msgid "This user name has already been added"
-msgstr "Este nome de usuario xa est engadido"
+msgid "Bootloader main options"
+msgstr "Opci髇s principais do cargador de arrinque"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Este nome de usuario xa est engadido"
+msgid "Tape"
+msgstr "Tipo"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Probando a conexi髇..."
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "O nome de usuario (login) s debe conter letras, n鷐eros, '-' e '_'"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please give a user name"
-msgstr "Indique o nome de usuario"
+msgid "Malaysia"
+msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "Este contrasinal demasiado simple"
+msgid "Swiss (French layout)"
+msgstr "Su韟o (franc閟)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Please try again"
-msgstr "Tente de novo"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid fallou (縫ode que non estean as raidtools?)"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "Os contrasinais non coinciden"
+msgid "Webcam"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "(already added %s)"
-msgstr "(%s xa foi engadido)"
+msgid "size of the (second level) cpu cache"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Tarxeta de son"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "access to compilation tools"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "access to network tools"
+msgid "Level %s\n"
+msgstr "Nivel %s\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Luxembourg"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "access to administrative files"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Iraniano"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "allow \"su\""
+msgid "Bus"
msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to rpm tools"
+msgid "Iraq"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
+msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
+"topouse un conflicto potencial de enderezos da LAN na configuraci髇 actual "
+"de %s!\n"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring..."
+msgstr "Configurando..."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr ""
+"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
+"Actualmente est activada."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"Estas son as diferentes entradas.\n"
-"Pode engadir algunhas m醝s ou cambiar as que xa existen."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
+msgid "Password (again)"
+msgstr "Contrasinal (de novo)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
+msgid "Venezuela"
+msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "Enderezo IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "縌ue tipo de entrada desexa engadir?"
+msgid "Choose the sizes"
+msgstr "Escolla os tama駉s"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "Esta etiqueta xa se est a usar"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Debe ter unha partici髇 de intercambio"
+msgid "Choose another partition"
+msgstr "Crear unha nova partici髇"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "Aceptar usuario"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Nome de usuario"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "You must specify a kernel image"
+msgid "Left \"Windows\" key"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Etiqueta baleira non permitida"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "Configuraci髇 da LAN"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Default"
-msgstr "Por omisi髇"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NoVideo"
+msgid "Guyana"
msgstr ""
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Initrd-size"
+msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Append"
-msgstr "Agregar"
+msgid "Remove a module"
+msgstr "Quitar un m骴ulo"
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Label"
-msgstr "Etiqueta"
+msgid "Password"
+msgstr "Contrasinal"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "Inseguro"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "Configuraci髇 da LAN"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Table"
-msgstr "T醔oa"
+msgid "Scanning on your HP multi-function device"
+msgstr ""
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Ra韟"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "Lectura-escritura"
+msgid "Choose an existing RAID to add to"
+msgstr "Escolla un dos RAID para engadirlle"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turco (moderno modelo \"Q\")"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "Modo de v韉eo"
+msgid "Lilo message not found"
+msgstr ""
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "Imaxe"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Default OS?"
-msgstr "縎O por omisi髇?"
+msgid "if needed"
+msgstr "se for necesario"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "Restaurar a partir dun ficheiro"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Usar detecci髇 autom醫ica"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable OF Boot?"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "縋ermitir o arrinque de CD?"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Kernel Boot Timeout"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Configuraci髇 de Internet"
+
+#: ../../printer/data.pm:1
#, c-format
-msgid "Open Firmware Delay"
+msgid "LPD - Line Printer Daemon"
msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Boot device"
-msgstr "Dispositivo de arrinque"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Se ten unha tarxeta ISA, os valores na seguinte pantalla deber韆n ser os "
+"correctos.\n"
+"\n"
+"Se ten unha tarxeta PCMCIA, ten que co馿cer a irq e a e/s da tarxeta.\n"
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Mensaxe inicial"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "Imprimindo p醲ina(s) de proba..."
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "Cargador de arrinque que usar"
+msgid "Gurmukhi"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "Opci髇s principais do cargador de arrinque"
+msgid "Force No APIC"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
-"A opci髇 ``restrinxir opci髇s da li馻 de comandos'' non ten sentido sen "
-"contrasinal"
+"Este contrasinal demasiado simple (ten que ter polo menos %d caracteres)"
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Indicar o tama駉 da memoria en MB"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Teclado"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Activar perf韘 m鷏tiples"
+msgid "FTP proxy"
+msgstr "Proxy FTP"
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tama駉 exacto de memoria se for necesario (atop醨onse %d MB)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Instalar sistema"
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Baleirar /tmp en cada arrinque"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Restaurar a partir dun ficheiro"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "Crear disquete de arrinque"
+msgid "Show only for the selected day"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "restrict"
-msgstr "restrinxir"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Restrict command line options"
-msgstr "Restrinxir opci髇s da li馻 de comandos"
+msgid "512 kB"
+msgstr "512 KB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Force No APIC"
+msgid "Logs"
msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "縋ermitir o arrinque de CD?"
-
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "Retardo antes de arrincar a imaxe por omisi髇"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "compact"
-msgstr "compacto"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Compact"
-msgstr "Compacto"
+msgid "What kind of card do you have?"
+msgstr "縌u tipo de tarxeta ten?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Bootloader installation"
-msgstr "Instalaci髇 do cargador de arrinque"
+msgid "<control>O"
+msgstr "<control>A"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partici髇 de arranque"
+msgid "Security"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "縊nde quere instalar o cargador de arrinque?"
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Xen閞ico"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instalaci髇 do LILO/grub"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "SILO Installation"
-msgstr "Instalaci髇 do SILO"
+msgid "Network Configuration"
+msgstr "Configuraci髇 da rede"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Skip"
-msgstr "Omitir"
+msgid "<control>S"
+msgstr "<control>G"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Gardar nun disquete"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Resto do mundo \n"
+" sen canle-D (li馻s dedicadas)"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Primeiro sector da partici髇 de arranque"
+msgid "Notice"
+msgstr "bo"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
+"Arguments: (arg)\n"
"\n"
-"On which drive are you booting?"
+" Activate/Disable daily security check."
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Creando o disco de arrinque"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Escolla a disqueteira que quere usar para crear o disco de arranque"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "Segunda unidade de disquete"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "Primeira unidade de disquete"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, pero non hai ningunha disqueteira dispo駃ble"
+msgid "What type of partitioning?"
+msgstr "縌u tipo de particionamento quere?"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"Un disco de arrinque personalizado d醠le a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"鷗il se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuraci髇 do seu equipo.\n"
-"Un disco de arrinque personalizado tam閚 pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo as moito m醝s f醕il a recuperaci髇 no caso de fallo\n"
-"grave do sistema. 緿esexa crear un disco de arrinque para o seu sistema?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Interface"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"Un disco de arrinque personalizado d醠le a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"鷗il se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuraci髇 do seu equipo.\n"
-"Un disco de arrinque personalizado tam閚 pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo as moito m醝s f醕il a recuperaci髇 no caso de fallo\n"
-"grave do sistema. 緿esexa crear un disco de arrinque para o seu sistema?"
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "縊nde quere instalar o cargador de arrinque?"
+msgid "comma separated strings"
+msgstr "Formatar partici髇s"
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "non hai espacio dabondo en /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "Mensaxe inicial"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A entrada marcada arrincarase automaticamente en %d segundos."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "Servidor"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "Rato"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Formatando"
+
+#: ../../lang.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrincar, ou 'c' para a li de comandos."
+msgid "Rwanda"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prema enter para arrincar o SO seleccionado, 'e' para editar os"
+msgid "Do you have any %s interfaces?"
+msgstr "縏en algunha interface %s?"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
+msgid "Switzerland"
+msgstr ""
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "瑽envido ao GRUB, o selector de sistemas operativos!"
+msgid "Brunei Darussalam"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Remote lpd Printer Options"
+msgstr "Opci髇s da impresora remota lpd"
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO con men de texto"
+msgid "Configure Internet Access..."
+msgstr "Configurar o acceso Internet..."
-#: ../../bootloader.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "Noruegu閟"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO con men gr醘ico"
+msgid "Danish"
+msgstr "Dinamarqu閟"
-#: ../../bootloader.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
-"Benvido ao %s, o selector de sistema operativo!\n"
-"\n"
-"Escolla un sistema operativo na lista de enriba, ou\n"
-"agarde %d segundos para que se arrinque o sistema por defecto.\n"
-"\n"
+"Introduza o enderezo IP desta m醧uina, por favor.\n"
+"Cada valor ten que ser introducido coma un enderezo IP en\n"
+"notaci髇 decimal con puntos (por exemplo: 1.2.3.4)."
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "consolehelper missing"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
msgstr ""
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "falla o kdesu"
+msgid "Processors"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pode escoller outras linguas que estar醤 dispo駃bles trala instalaci髇"
+msgid "Bulgaria"
+msgstr "H鷑garo"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Non posible engadir m醝s partici髇s"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
+msgid "No NIC selected!"
+msgstr "Non conectado"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "1 minute"
-msgstr "1 minuto"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Ficheiro de backup incorrecto"
-#: ../../common.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "SMB server IP"
+msgstr "IP do servidor SMB"
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr ""
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "scribirase disco a t醔oa de partici髇s da unidade %s!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Austria"
-msgstr "serie"
+msgid "Installing HPOJ package..."
+msgstr "Instalando o paquete %s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "Italiano"
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Un disco de arrinque personalizado d醠le a posibilidade de arrincar o seu\n"
+"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
+"ser\n"
+"鷗il se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
+"sistema\n"
+"operativo o borra ou se LILO non funciona coa configuraci髇 do seu equipo.\n"
+"Un disco de arrinque personalizado tam閚 pode ser usado coa imaxe de "
+"rescate\n"
+"de Mandrake, facendo as moito m醝s f醕il a recuperaci髇 no caso de fallo\n"
+"grave do sistema. 緿esexa crear un disco de arrinque para o seu sistema?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands"
+msgid ", USB printer \\#%s"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Mirar"
+msgid "Latvian"
+msgstr "Localizaci髇"
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Noruegu閟"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Grego"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Module name"
+msgstr "Nome do m骴ulo"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Germany"
-msgstr "Alem醤"
+msgid "Start at boot"
+msgstr "Iniciado o arrincar"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech Republic"
+msgid "Use Incremental Backups"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belga"
+#: ../../any.pm:1
+#, c-format
+msgid "First sector of drive (MBR)"
+msgstr "Primeiro sector do disco (MBR)"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "France"
-msgstr "Francia"
+msgid "Joystick"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Costa Rica"
+msgid "El Salvador"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro abrir %s para escritura: %s"
+msgid "Use Unicode by default"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Nothing to do"
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Tentando recuperar a t醔oa de partici髇s de rescate"
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Non pode usar un volume l髕ico LVM para o punto de montaxe %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../interactive/stdio.pm:1
+#, c-format
msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-"Necesita un sistema de ficheiros real (ext2, reiserfs) para este punto de "
-"montaxe\n"
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio deber韆 permanecer dentro do sistema de ficheiros ra韟"
+msgid "Unable to start live upgrade !!!\n"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non pode usar un volume l髕ico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Seleccionou unha partici髇 RAID software como ra韟 (/).\n"
-"Non hai ning鷑 cargador de arrinque que funcione deste xeito sen unha\n"
-"partici髇 /boot.\n"
-"Lembre polo tanto engadir unha partici髇 /boot"
+msgid "Name: "
+msgstr "Nome: "
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Xa existe unha partici髇 co punto de montaxe %s\n"
+msgid "16 million colors (24 bits)"
+msgstr "16 mill髇s de cores (24 bits)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Allow all users"
+msgstr "Engadir usuario"
+
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
+msgid "The official MandrakeSoft Store"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Os puntos de montaxe deben empezar por /"
+msgid "Resizing"
+msgstr "Redimensionando"
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non pode usar ReiserFS para partici髇s m醝s pequenas que 32MB"
+msgid "Cable connection"
+msgstr "Conexi髇 por cable"
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non pode usar JFS para partici髇s m醝s pequenas que 16MB"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Nome de usuario"
#: ../../fsedit.pm:1
#, fuzzy, c-format
@@ -978,753 +1507,234 @@ msgstr ""
"\n"
"緾oncorda coa perda de t骴alas partici髇s?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "Erro"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "with /usr"
+msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "simple"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Servidor de impresi髇"
-#: ../../fs.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Formatando a partici髇 %s"
+msgid "Name"
+msgstr "Nome: "
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
+msgid "mkraid failed"
+msgstr "mkraid fallou"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "Button 3 Emulation"
msgstr ""
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Formatando a partici髇 %s"
-
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Resoluci髇: %s\n"
+msgid "Sending files..."
+msgstr "Gardar nun ficheiro"
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando a partici髇 %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israel (Fon閠ico)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando e formatando o ficheiro %s"
+msgid "access to rpm tools"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Desco耖cese o xeito de formatar %s de tipo %s"
+msgid "edit"
+msgstr ""
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "O formato %s de %s fallou"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "URI do dispositivo de impresi髇"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+msgid "Permission problem accessing CD."
msgstr ""
-#: ../../help.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
+msgid "Phone number"
+msgstr "N鷐ero de tel閒ono"
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer name, description, location"
+msgstr "Conexi髇 da impresora"
+
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+msgid "USA (broadcast)"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+"Please choose the\n"
+"media for backup."
+msgstr "Escolla a lingua que desexe usar."
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Use Xinerama extension"
+msgstr "Usar detecci髇 autom醫ica"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "Europa"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Detectar discos duros"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Copying %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+msgid "Choose color"
+msgstr "Escolla o monitor"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
msgstr ""
-"LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-"Linux ou outro sistema operativo presente no seu ordenador.\n"
-"Normalmente, estes outros sitemas son detectados correctamente e "
-"instalados.\n"
-"Se non o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-"coidadoso na escolla dos par醡etros correctos.\n"
-"\n"
-"\n"
-"Tam閚 pode non querer dar acceso a eses outros sitemas operativos a "
-"calquera,\n"
-"poidendo borrar as entradas correspondentes. Pero neste caso, precisar醆n"
-"un disquete de arrinque para poder usalos."
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+msgid "Swaziland"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid "Set-UID"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Seleccione o porto correcto. Por exemplo, o porto\n"
-"COM1 en MS Windows ch醡ase ttyS0 en GNU/Linux."
+msgid "Please check if you are using CDRW media"
+msgstr "Prema nunha partici髇"
#: ../../help.pm:1
#, c-format
msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid " on parallel port \\#%s"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Rato de 2 bot髇s xen閞ico"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Quitar primeiro os volumes l髕icos\n"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "A entrada marcada arrincarase automaticamente en %d segundos."
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
+msgid "Internet access"
+msgstr "Acceso Internet"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "Enabling servers..."
+msgstr "Activando os servidores..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Imprimindo p醲ina(s) de proba..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Xa existe unha partici髇 co punto de montaxe %s\n"
#: ../../help.pm:1
#, fuzzy, c-format
@@ -1745,51 +1755,49 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
"Neste punto, ten que escoller onde quere instalar o sistema operativo\n"
"Mandrake Linux no disco duro. Se est baleiro, ou se hai outro sistema\n"
@@ -1856,178 +1864,120 @@ msgstr ""
"datos moi facilmente. Polo tanto,\n"
" non a escolla a menos que saiba o que est a facer."
-#: ../../help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "Ucra韓o"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Autenticaci髇"
+
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "M骴em RDSI externo"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Your choice? (default %s) "
+msgstr "緼 s鷄 escolla? (por omisi髇 %s)"
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Trouble shooting"
msgstr ""
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Resoluci髇"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
msgstr ""
+"A(s) p醲ina(s) de proba envi醨onse servidor de impresi髇.\n"
+"Pode que lle leve un pouco ata que a impresora comece.\n"
+"Estado da impresi髇:\n"
+"%s\n"
+"\n"
+"縁unciona correctamente?"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Agora poder escoller que servicios quere que sexan arrincados inicio.\n"
-"Cando o seu rato pasa por riba dun elemento, unha pequena axuda aparecer醆n"
-"describindo o cometido do servicio.\n"
-"\n"
-"Sexa especialmente coidadoso neste paso se pretende utiliza-la s鷄 m醧uina\n"
-"coma un servidor: probablemente non querer iniciar servicios que non "
-"precisa."
+msgid "and one unknown printer"
+msgstr "Sen impresora"
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Island閟"
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "kernel version"
+msgstr "versi髇 do n鷆leo"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "Configuraci髇 da rede"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "可 isto correcto?"
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2042,4637 +1992,4652 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "Configuraci髇 da LAN"
+
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Autoprobe"
+msgstr "Autodetecci髇"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Can't use broadcast with no NIS domain"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
+
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
+msgid "drakfloppy"
+msgstr "drakfloppy"
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-#: ../../install2.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You must also format %s"
+msgid "Peru"
msgstr ""
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Dispositivo do rato: %s\n"
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu un erro - non se atopou ning鷑 dispositivo v醠ido para crear novos "
-"sistemas de ficheiros. Verifique o seu equipo para ver a raz髇 deste problema"
+msgid "Remove Windows(TM)"
+msgstr "Borrar Windows(TM)"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo o ficheiro %s"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Executa e para o Servidor de Fontes X arrincar e apagar."
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"Para usar esta selecci髇 de paquetes gardada, arrinque a instalaci髇 con "
-"``linux defcfg=floppy''"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira un disquete formatado con FAT na unidade %s"
+msgid "Madagascar"
+msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
+msgid "Urpmi"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+msgid "Cron not available yet as non-root"
msgstr ""
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "Non"
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "System"
+msgstr "Mouse Systems"
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Yes"
-msgstr "Si"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "緿esexa usar aboot?"
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "Arabic"
msgstr ""
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Configuraci髇"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "Opci髇s"
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System installation"
-msgstr "Instalaci髇 do SILO"
+msgid "Password required"
+msgstr "Contrasinal"
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Bringing down the network"
-msgstr "Desactivando a rede"
+msgid "%d minutes"
+msgstr "%d minutos"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Bringing up the network"
-msgstr "Activando a rede"
+msgid "Graphics card: %s"
+msgstr "Tarxeta gr醘ica: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento fallou: %s"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O axudante de particionamento do DrakX atopou as seguintes soluci髇s:"
+msgid "XFree configuration"
+msgstr "Configuraci髇 de XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "Non se pode atopar espacio para a instalaci髇"
+msgid "Choose action"
+msgstr "Escolla a acci髇"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+msgid "French Polynesia"
msgstr ""
-"Pode agora particionar %s.\n"
-"Cando remate, non esqueza gravar usando `w'"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
+msgid "Support the OKI 4w and compatible winprinters."
msgstr ""
-"Perderanse TODAS as partici髇s existentes e os seus datos na unidade %s"
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
-"Ten m醝s dunha unidade de disco duro, 縠n cal delas desexa instalar linux?"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "Borrar o disco completo"
+msgid "Installing driver for %s card %s"
+msgstr "Instalando o controlador para a tarxeta %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Borrar Windows(TM)"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Non hai partici髇s FAT para redimensionar ou para usar como loopback (ou non "
-"hai espacio libre dabondo)"
+msgid "Enable Server"
+msgstr "Bases de datos"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Ukrainian"
+msgstr "Ucra韓o"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "O redimensionamento da FAT fallou: %s"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Insira un disquete na unidade %s"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Calculando os l韒ites do sistema de ficheiros de Windows"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "non se atopou ningunha tarxeta de rede"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resizing"
-msgstr "Redimensionando"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Borrar Windows(TM)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "partition %s"
-msgstr "partici髇 %s"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "縌ue tama駉 desexa manter para o Windows en"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
-"WARNING!\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
msgstr ""
-"VISO!\n"
+"LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
+"Linux ou outro sistema operativo presente no seu ordenador.\n"
+"Normalmente, estes outros sitemas son detectados correctamente e "
+"instalados.\n"
+"Se non o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
+"coidadoso na escolla dos par醡etros correctos.\n"
"\n"
-"O DrakX vai agora redimensionar a partici髇 de Windows. Te馻 coidado:\n"
-"esta operaci髇 perigosa. Se a韓da non o fixo, deber韆 executar primeiro\n"
-"o scandisk no Windows (e opcionalmente o defrag), e reiniciar a "
-"instalaci髇.\n"
-"Tam閚 aconsellable facer unha copia de seguridade dos seus datos.\n"
-"Cando estea seguro, prema Aceptar."
+"\n"
+"Tam閚 pode non querer dar acceso a eses outros sitemas operativos a "
+"calquera,\n"
+"poidendo borrar as entradas correspondentes. Pero neste caso, precisar醆n"
+"un disquete de arrinque para poder usalos."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+msgid "System mode"
msgstr ""
-"A partici髇 de Windows est demasiado fragmentada, execute primeiro o "
-"``defrag''"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Usar o espacio libre da partici髇 de Windows"
-
-#: ../../install_interactive.pm:1
-#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
msgstr ""
-"O redimensionador de FAT non capaz de manexar a s鷄 partici髇,\n"
-"ocorreu o seguinte erro: %s"
+"Para imprimir nunha impresora NetWare, necesario escribir o nome\n"
+"do servidor de impresi髇 NetWare (que non sempre o mesmo que\n"
+"o nome de m醧uina TCP/IP), ademais do nome da fila de impresi髇\n"
+"que desexa usar, as como calquera nome de usuario ou contrasinal\n"
+"que for necesario."
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "縌ue partici髇 desexa redimensionar?"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "M醩cara de rede"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espacio libre da partici髇 de Windows"
+msgid "Append"
+msgstr "Agregar"
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
-"Non hai partici髇s FAT para redimensionar ou para usar como loopback (ou non "
-"hai espacio libre dabondo)"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Tama駉 da partici髇 de intercambio en MB: "
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "Tama駉 da partici髇 ra韟 en MB: "
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "Escolla os tama駉s"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"A auto-instalaci髇 pode ser moi automatizada se as韁n"
+"se desexa, nese caso adquirir o control do disco duro\n"
+"(isto vale para a instalaci髇 noutro equipo).\n"
+"\n"
+"Pode preferir realizar novamente a instalaci髇.\n"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network printer \"%s\", port %s"
+msgstr "Impresora de rede (TCP/Socket)"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "縌ue partici髇 desexa usar para Linux4Win?"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr ""
+"Escolla o adaptador de rede que vai estar conectado rede de 醨ea local."
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partici髇 de Windows para loopback"
+msgid "OK to restore the other files."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "Escolla a disposici髇 do seu teclado."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "Non hai ningunha partici髇 existente para usar"
+msgid "Printer Device URI"
+msgstr "URI do dispositivo de impresi髇"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use existing partitions"
-msgstr "Usar partici髇 existente"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
+msgid "Terminal-based"
+msgstr "Baseado nun terminal"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use free space"
-msgstr "Usar espacio libre"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe ter unha partici髇 de intercambio"
+msgid "The user name is too long"
+msgstr "Este nome de usuario xa est engadido"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non disp髇 de partici髇 de intercambio\n"
-"\n"
-"緿esexa continuar de calquera xeito?"
+msgid "Other OS (windows...)"
+msgstr "Outros SO (windows...)"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+msgid "WebDAV remote site already in sync!"
msgstr ""
-"Ten que ter unha partici髇 ra韟.\n"
-"Para iso, faga unha partici髇 (ou prema nunha que xa exista).\n"
-"Ent髇 escolla a acci髇 ``Punto de montaxe'', e as骳ieo a `/'"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Alg鷑 hardware do seu ordenador necesita controladores ``propietarios''\n"
-"para funcionar. Pode atopar m醝s informaci髇 sobre eles en: %s"
+msgid "Generate auto install floppy"
+msgstr "Xerar disquete de auto-instalaci髇"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"Noraboa, a instalaci髇 rematou.\n"
-"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
-"\n"
-"\n"
-"Para informaci髇 sobre parches dispo駃bles para esta versi髇\n"
-"de Mandrake Linux, consulte o ficheiro de erratas dispo駃bles en\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Para informaci髇 sobre a configuraci髇 do seu sistema, despois\n"
-"da instalaci髇, hai un cap韙ulo na Gu韆 do Usuario Oficial\n"
-"de Mandrake Linux."
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "Dominio NIS"
+
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "No open source driver"
msgstr ""
-#: ../../install_messages.pm:1
-#, c-format
+#: ../../security/level.pm:1
+#, fuzzy, c-format
msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
+"T髆anse caracter韘ticas do nivel 4, pero agora o sistema est completamente\n"
+"pechado. As caracter韘ticas de seguridade est醤 m醲imo nivel."
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgid "Nicaragua"
msgstr ""
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "New Caledonia"
+msgstr "Macedonio"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Europa (EDSS1)"
+
+#: ../../any.pm:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando na etapa '%s'\n"
+msgid "Video mode"
+msgstr "Modo de v韉eo"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "Tente de novo"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Oman"
+msgstr "Dominio NIS"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Configuraci髇 da rede"
+
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Help"
-msgstr "Axuda"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "not configured"
-msgstr "reconfigurar"
+msgid "New size in MB: "
+msgstr "Tama駉 en MB: "
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "Tipo de t醔oa de partici髇s: %s\n"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Configure"
-msgstr "Configurar as X"
+msgid "Authentication Windows Domain"
+msgstr "Autenticaci髇"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Go on anyway?"
-msgstr "縎eguir adiante?"
+msgid "US keyboard"
+msgstr "Estadounidense"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "Houbo un erro instalar os paquetes:"
+msgid "Buttons emulation"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Houbo un erro ordenar os paquetes:"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"ude o Cd-Rom!\n"
+"Drakbackup activities via tape:\n"
"\n"
-"Por favor, insira o Cd-Rom etiquetado \"%s\" na unidade e prema Aceptar. Se "
-"non o ten, prema Cancelar para omitir a instalaci髇 deste Cd-Rom."
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Refuse"
-msgstr "Rexeitar"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Aceptar"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Gardar nun ficheiro"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installing package %s"
-msgstr "Instalando o paquete %s"
+msgid "Halt bug"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Configuraci髇 da LAN"
+
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No details"
-msgstr "Detalles"
+msgid "Bosnian"
+msgstr "Estonio"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Details"
-msgstr "Detalles"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Agarde, por favor"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection speed"
+msgstr "Tipo de conexi髇: "
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Por favor, agarde, preparando a instalaci髇"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Time remaining "
-msgstr "Tempo restante "
+msgid "Namibia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Bases de datos"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Estimating"
-msgstr "Estimando"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "Installing"
-msgstr "Instalando"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Non se pode engadir unha partici髇 RAID _formatado_ md%d"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Escolla os paquetes que desexa instalar"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware, pero s con\n"
+"XFree %s, ADVIRTA QUE ESTE SOPORTE EXPERIMENTAL E PODE COLGAR O SISTEMA.\n"
+"A s鷄 tarxeta est soportada por XFree %s, que pode ter un mellor soporte en "
+"2D."
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Desinstalar"
+msgid "Please wait, setting security options..."
+msgstr "Por favor, agarde, preparando a instalaci髇"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Gardar a selecci髇 de paquetes"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "Gardar nun disquete"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Launch the graphical environment when your system starts"
+msgstr "Lanzar o sistema X-Window iniciar"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<- Previous"
-msgstr "<- Anterior"
+msgid "hourly"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Install"
-msgstr "Instalar"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
+msgid "Making printer port available for CUPS..."
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"
+msgid "Antigua and Barbuda"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-"Este paquete ten que ser actualizado\n"
-"縀st seguro de que quere deseleccionalo?"
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non pode deseleccionar este paquete. Xa est instalado"
+msgid "Spanish"
+msgstr "Espa駉l"
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este un paquete obrigatorio, non se pode deseleccionar"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Estado:"
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Non pode seleccionar/deseleccionar este paquete"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Vanse eliminar os seguintes paquetes"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Configurar impresora"
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Vanse instalar os seguintes paquetes"
+msgid "Normal modem connection"
+msgstr "Conexi髇 normal por m骴em"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "Selecci髇 dos grupos de paquetes"
+
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
msgstr ""
-"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
-"instalalo"
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
+msgid "CUPS"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tama駉: %d KB\n"
+msgid "Run config tool"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "Versi髇: %s\n"
+msgid "Bootloader installation"
+msgstr "Instalaci髇 do cargador de arrinque"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
+msgid "Root partition size in MB: "
+msgstr "Tama駉 da partici髇 ra韟 en MB: "
#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Bad package"
-msgstr "Paquete err髇eo"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Este un paquete obrigatorio, non se pode deseleccionar"
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Other"
-msgstr "Outros"
+msgid "Etherboot ISO image is %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) un servidor de nomes de dominio (DNS), que se emprega\n"
+"para converter os nomes de m醧uinas a enderezos IP."
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Disconnect..."
+msgstr "Conectar..."
+
+#: ../../lang.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tama駉 total: %d / %d MB"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "Porto"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Next ->"
-msgstr "Seguinte ->"
+msgid "Palau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "Selecci髇 individual de paquetes"
+msgid "level"
+msgstr "nivel"
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "Selecci髇 dos grupos de paquetes"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-"O seu sistema ten poucos recursos. Pode que te馻 alg鷑 problema\n"
-"instalando Mandrake Linux. Se iso acontece, pode tentar unha instalaci髇\n"
-"en modo texto. Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
-"'text'."
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Save packages selection"
-msgstr "Gardar a selecci髇 de paquetes"
+msgid "You can configure each parameter of the module here."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Automated"
-msgstr "Automatizada"
+msgid "Choose the resolution and the color depth"
+msgstr "Escolla a resoluci髇 e a profundidade de cor"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Replay"
-msgstr "Reproducir"
+msgid "Emulate third button?"
+msgstr "縀mular o terceiro bot髇?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-"A auto-instalaci髇 pode ser moi automatizada se as韁n"
-"se desexa, nese caso adquirir o control do disco duro\n"
-"(isto vale para a instalaci髇 noutro equipo).\n"
-"\n"
-"Pode preferir realizar novamente a instalaci髇.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "Xerar disquete de auto-instalaci髇"
+msgid "Mount"
+msgstr "Montar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Ra韟"
+msgid "Creating auto install floppy"
+msgstr "Creando un disquete de auto-instalaci髇"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Instalar sistema"
+
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "text box height"
msgstr ""
-"Algunhas das etapas non foron completadas.\n"
-"\n"
-"緿esexa realmente sa韗 agora?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Creando un disquete de auto-instalaci髇"
+msgid "State"
+msgstr "Estado"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
+msgid "Be sure a media is present for the device %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Enable multiple profiles"
+msgstr "Activar perf韘 m鷏tiples"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A instalaci髇 do xestor de arrinque fallou. Ocorreu o seguinte erro:"
+msgid "Local printer"
+msgstr "Impresora local"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "Cargador de arrinque"
+msgid "Package selection"
+msgstr "Selecci髇 dos grupos de paquetes"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Mauritania"
msgstr ""
-"Erro instalando aboot, \n"
-"縫robar a forzar a instalaci髇 mesmo se iso destr鷈 a primeira partici髇?"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "緿esexa usar aboot?"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "Preparando o cargador de arrinque"
+msgid "All primary partitions are used"
+msgstr "T骴alas partici髇s primarias est醤 usadas"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Domain Admin Password"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
+"Tras facer iso, acons閘lase reiniciar o sistema X para\n"
+"evitar os problemas de mudar o nome de m醧uina."
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
+
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Nome de dominio"
+msgid "Installation Server Configuration"
+msgstr "Configuraci髇 da LAN"
#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring IDE"
+msgstr "Configurando o IDE"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "Dominio NIS"
+msgid "Network functionality not configured"
+msgstr "O monitor non est configurado"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autenticaci髇"
+msgid "Configure module"
+msgstr "Configurar o rato"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Servidor NIS"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Conectar Internet"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "Dominio NIS"
+msgid "You'll need to reboot before the modification can take place"
+msgstr ""
+"Necesitar reiniciar o equipo para que a modificaci髇 sexa tomada en conta"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "Autenticaci髇 NIS"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider phone number"
+msgstr "N鷐ero de tel閒ono do provedor"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "NIS"
-msgstr "Usar NIS"
+msgid "Host %s"
+msgstr "Nome de m醧uina"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
+msgid "Armenia"
+msgstr "Armenio (antigo)"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "Autenticaci髇"
+msgid "Fiji"
+msgstr "Finalizar"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "LDAP"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Local files"
-msgstr "Impresora local"
-
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Authentication"
-msgstr "Autenticaci髇"
+msgid "Second floppy drive"
+msgstr "Segunda unidade de disquete"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid "About Harddrake"
msgstr ""
-"Este contrasinal demasiado simple (ten que ter polo menos %d caracteres)"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "No password"
-msgstr "Sen contrasinal"
+msgid "Drive capacity"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set root password"
-msgstr "Contrasinal de root"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Insira un disquete na unidade\n"
+"Perderanse t骴olos datos no disquete"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Size: %s"
+msgstr "Tama駉: %s"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Services"
-msgstr "dispositivo"
+msgid "secondary"
+msgstr "%d segundos"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "System"
-msgstr "Mouse Systems"
+msgid "View Backup Configuration."
+msgstr "Configuraci髇 da rede"
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Porto"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Cargador de arrinque que usar"
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No password"
+msgstr "Sen contrasinal"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Boot"
-msgstr "Ra韟"
+msgid "Nigeria"
+msgstr "serie"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "desactivar"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no existing partition to use"
+msgstr "Non hai ningunha partici髇 existente para usar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "activated"
-msgstr "Activar"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Firewall/Encami馻dor"
-
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
-#, c-format
-msgid "Security"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"Para imprimir nunha impresora de socket, ten que fornecer\n"
+"o nome do servidor da impresora, e opcionalmente o n鷐ero do porto."
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Establecendo o nivel de seguridade"
+msgid "Hard drive information"
+msgstr "Informaci髇 do correo"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian"
+msgstr "Ruso"
+
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network"
-msgstr "Interface de rede"
+msgid "Jordan"
+msgstr "Iraniano"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Interface de rede"
+msgid "Hide files"
+msgstr "mkraid fallou"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "Lanzar X11 arrincar"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Impresora remota"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Hardware"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "TV card"
-msgstr "Tarxeta de TV"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Sorry, no floppy drive available"
+msgstr "Desculpe, pero non hai ningunha disqueteira dispo駃ble"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Bolivia"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "縏en algunha outra?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Sound card"
-msgstr "Tarxeta de son"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No printer"
-msgstr "Sen impresora"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Timezone"
-msgstr "Zona horaria"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Keyboard"
-msgstr "Teclado"
+msgid "Bad package"
+msgstr "Paquete err髇eo"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Summary"
-msgstr "Resume"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "NTP Server"
-msgstr "Servidor NIS"
+msgid "DrakSec Basic Options"
+msgstr "Opci髇s"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "縊 reloxo interno do seu ordenador usa a hora GMT?"
+msgid "Romania"
+msgstr "Dominio NIS"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Which is your timezone?"
-msgstr "緾al a s鷄 zona horaria?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Dispositivo de arrinque"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "緿esexa configurar unha impresora?"
+msgid "Canada"
+msgstr "Canadiano (Qu閎ec)"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
-msgstr ""
+msgid "Remove from LVM"
+msgstr "Quitar do LVM"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Contactando co espello para obter a lista dos paquetes dispo駃bles"
+msgid "Timezone"
+msgstr "Zona horaria"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escoller un espello do que coller os paquetes"
+msgid "German"
+msgstr "Alem醤"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Next ->"
+msgstr "Seguinte ->"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Contactando co espello para obter a lista dos paquetes dispo駃bles"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira un disquete na unidade %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guinea-Bissau"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "Configuraci髇 trala instalaci髇"
+msgid "Horizontal refresh rate"
+msgstr "Frecuencia de actualizaci髇 horizontal"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
-"Instalando o paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Preparando a instalaci髇"
+"Non se pode quitar o punto de montaxe porque esta partici髇 estase a\n"
+"usar de loopback.\n"
+"Quite primeiro o loopback"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etiquetado \"%s\""
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+msgid "USB controllers"
msgstr ""
-"Se ten t骴olos CDs na lista inferior, prema Aceptar.\n"
-"Se non ten ning鷑 deses CDs, prema Cancelar.\n"
-"Se s faltan alg鷑s dos CDs, desm醨queos, e prema Aceptar."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../Xconfig/various.pm:1
+#, fuzzy, c-format
+msgid "What norm is your TV using?"
+msgstr "縌ue tipo de conexi髇 RDSI ten?"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "All"
-msgstr "Todas"
+msgid "Type:"
+msgstr "Tipo:"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+msgid "Share name"
+msgstr "Nome de recurso compartido"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "enable"
+msgstr "activar"
#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "With X"
-msgstr "Agarde"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Contactando co espello para obter a lista dos paquetes dispo駃bles"
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "緿esexa reiniciar a rede?"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Type of install"
-msgstr "Elixa o paquete a instalar"
+msgid "Remove the loopback file?"
+msgstr "Formatando o ficheiro loopback %s"
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Insira un disquete na unidade %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "Restaurar a partir dun disquete"
+msgid "Please choose your country."
+msgstr "Escolla o seu tipo de rato."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Package selection"
-msgstr "Selecci髇 dos grupos de paquetes"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "Gardar nun disquete"
+msgid "Hard Disk Backup files..."
+msgstr "Ficheiro de backup incorrecto"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "Restaurar a partir dun disquete"
+msgid "Laotian"
+msgstr "Localizaci髇"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Samoa"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-"O seu sistema non ten espacio libre dabondo para a instalaci髇 ou "
-"actualizaci髇 (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Buscando os paquetes dispo駃bles"
+"O protocolo rstat permite 髎 usuarios dunha rede obter\n"
+"m閠ricas de rendemento de calquera m醧uina desa rede."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Atopando os paquetes para actualizar"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Non pode deseleccionar este paquete. Xa est instalado"
+msgid "Scanner"
+msgstr "Seleccione unha tarxeta gr醘ica"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Buscando os paquetes dispo駃bles"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Non hai espacio de intercambio dabondo para finalizar a instalaci髇,\n"
-"por favor, engada alg鷑"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Aviso: probar esta tarxeta gr醘ica pode colgar o ordenador"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
-msgstr ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "O nome de usuario (login) s debe conter letras, n鷐eros, '-' e '_'"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "緾omprobar os bloques err髇eos?"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "obrigatorio"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Elixa as partici髇s que desexa formatar"
+msgid "Welcome To Crackers"
+msgstr "Benvida 髎 crackers"
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar o equipo para que a modificaci髇 da t醔oa\n"
-"de partici髇s se tome en conta"
+msgid "Module options:"
+msgstr "Opci髇s do m骴ulo:"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Seleccione os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Examinando as partici髇s para atopar os puntos de montaxe"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "Configurando a rede"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No partition available"
-msgstr "ningunha partici髇 dispo駃ble"
+msgid "Abort"
+msgstr "Abortar"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configuring IDE"
-msgstr "Configurando o IDE"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Escolla os paquetes que desexa instalar."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarxetas PCMCIA..."
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Usar espacio libre"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "\t-CDROM.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Button 3 Emulation"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
msgstr ""
+"A partici髇 de Windows est demasiado fragmentada, execute primeiro o "
+"``defrag''"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr ""
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Noruegu閟)"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Buttons emulation"
+msgid "Hard Disk Backup Progress..."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Escolla o porto serie onde est conectado o seu rato."
+msgid "Unable to fork: %s"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mouse Port"
-msgstr "Porto do rato"
+msgid "Type: "
+msgstr "Tipo: "
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "Escolla o seu tipo de rato."
+msgid "<-- Edit Client"
+msgstr "Cliente DHCP"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Os contrasinais non coinciden"
+msgid "no fonts found"
+msgstr "%s non atopado"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Actualizaci髇"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Mouse"
+msgstr "Rato"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "可 isto unha instalaci髇 ou unha actualizaci髇?"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "not enough room in /boot"
+msgstr "non hai espacio dabondo en /boot"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Instalar/Actualizar"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Choosing an arbitratry driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Esta a lista completa de teclados dispo駃bles"
+msgid "Host name"
+msgstr "Nome de m醧uina"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Escolla a disposici髇 do seu teclado."
+#: ../../lang.pm:1
+#, c-format
+msgid "Liechtenstein"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Quit"
-msgstr "Sa韗"
+msgid "the color of the progress bar"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "License agreement"
-msgstr "Acordo da licencia"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "Ocorreu un erro"
+msgid "Add to RAID"
+msgstr "Engadir RAID"
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-" <Tab>/<Alt-Tab> entre elementos | <Space> escoller | <F12> seguinte "
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalaci髇 de Mandrake Linux %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
msgstr "Ningunha disqueteira dispo駃ble"
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvido a %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
msgstr ""
-"Alg鷑s paquetes importantes non se instalaron correctamente.\n"
-"A unidade de cdrom ou o cdrom est醤 defectuosos.\n"
-"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaxe %s duplicado"
+msgid "Continue anyway?"
+msgstr "緾ontinuar de calquera xeito?"
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-"Ocorreu un erro, e o programa non sabe como manexalo de\n"
-"maneira limpa. Contin鷈 seu propio risco."
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait"
-msgstr "Agarde, por favor"
+msgid "Printer"
+msgstr "Impresora"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
#, c-format
-msgid "Ok"
-msgstr "Aceptar"
+msgid "Saudi Arabia"
+msgstr ""
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Finish"
-msgstr "Finalizar"
+msgid "Internet"
+msgstr "Internet"
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Basic"
+msgid "Some devices were added:\n"
msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "Avanzado"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Xeometr韆: %s cilindros, %s cabezas, %s sectores\n"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove"
-msgstr "Impresora remota"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, c-format
-msgid "Modify"
-msgstr "Modificar"
+msgid "Printing on the printer \"%s\""
+msgstr "Desactivando a rede"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Add"
-msgstr "Engadir"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "Escolla a acci髇"
+msgid "Restore From Tape"
+msgstr "T醔oa de partici髇s de rescate"
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Choose the profile to configure"
+msgstr "Escolla o perfil para configurar"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "Configuraci髇 da rede"
+
+#: ../../fsedit.pm:1
#, c-format
-msgid "Right \"Windows\" key"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "縌ue sistema de impresi髇 desexa usar?"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Left \"Windows\" key"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "\"Menu\" key"
-msgstr ""
+msgid "See hardware info"
+msgstr "Mire a informaci髇 sobre o hardware"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Primeiro sector da partici髇 de arranque"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "Printer manufacturer, model"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "CapsLock key"
+msgid "PDQ - Print, Don't Queue"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Right Alt key"
+msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslavo (lat韓/cir韑ico)"
-
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"ringleira de n鷐eros\" QWERTY"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Os dous par醡etros cr韙icos son a taxa de actualizaci髇 vertical, que\n"
+"indica a frecuencia coa que a pantalla completa actualizada, e m醝s\n"
+"importante a韓da a taxa de sincronismo horizontal, que a\n"
+"frecuencia coa que se mostran as li馻s de barrido horizontal.\n"
+"\n"
+" MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
+"de frecuencias de sincronismo superior capacidade real do seu monitor,\n"
+"xa que pode danalo.\n"
+"No caso de d鷅ida, escolla unha configuraci髇 conservadora."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
+msgid "Modify"
+msgstr "Modificar"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "Estadounidense"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "UK keyboard"
-msgstr "Brit醤ico"
+msgid "Need hostname, username and password!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Ukrainian"
-msgstr "Ucra韓o"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (moderno modelo \"Q\")"
+msgid "HardDrake"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (tradicional modelo \"F\")"
+msgid "new"
+msgstr "novo"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Teclado Thai"
+msgid "Would you like to try again?"
+msgstr "緿esexa configurar unha impresora?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Thai keyboard"
-msgstr "Teclado Thai"
+msgid "Wizard"
+msgstr "Axudante"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armenio (m醧uina de escribir)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Edit selected server"
+msgstr "detectouse %s"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaian (cir韑ico)"
+msgid "Please choose where you want to backup"
+msgstr "Escolla os paquetes que desexa instalar."
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Necesita reiniciar o equipo para que a modificaci髇 da t醔oa\n"
+"de partici髇s se tome en conta"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
+msgid "Do not include the browser cache"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Slovenian"
-msgstr "Esloveno"
+msgid "Please, choose your keyboard layout."
+msgstr "Escolla a disposici髇 do seu teclado."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Swedish"
-msgstr "Sueco"
+msgid "Standard"
+msgstr "Est醤dar"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
+msgid "Please choose your mouse type."
+msgstr "Escolla o seu tipo de rato."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Russian"
-msgstr "Ruso"
+msgid "Connect..."
+msgstr "Conectar..."
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "Ruso (Yawerty)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Configurar impresora"
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Qu閎ec)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "Portugu閟"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (disposici髇 qwertz)"
+msgid "not configured"
+msgstr "reconfigurar"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (disposici髇 qwerty)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Norwegian"
-msgstr "Noruegu閟"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Abortar"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dutch"
-msgstr "Holand閟"
+msgid "Proxies configuration"
+msgstr "Configuraci髇 dos proxys"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr ""
+msgid "Start: sector %s\n"
+msgstr "Inicio: sector %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Azerbaian (cir韑ico)"
+msgid "Network interface already configured"
+msgstr "O monitor non est configurado"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Myanmar (Burmese)"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malayalam"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "Localizaci髇"
+msgid "Mail Server"
+msgstr "Bases de datos"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fon閠ico\" QWERTY"
+msgid "Please click on a partition"
+msgstr "Prema nunha partici髇"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"ringleira de n鷐eros\" QWERTY"
+msgid "Linux"
+msgstr "Linux"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
+msgid "Have a nice day!"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antigo)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Laotian"
-msgstr "Localizaci髇"
+msgid "across Network"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Latin American"
-msgstr "Latinoamericano"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Korean keyboard"
-msgstr "Brit醤ico"
+msgid "Upgrade %s"
+msgstr "Actualizaci髇"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Xapon閟 de 106 teclas"
+msgid "Select Printer Connection"
+msgstr "Selecci髇 da conexi髇 da impresora"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Inuktitut"
+msgid "Scanning for TV channels in progress ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Icelandic"
-msgstr "Island閟"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Iranian"
-msgstr "Iraniano"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Fon閠ico)"
+msgid "IP Range Start:"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Israeli"
-msgstr "Israel"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"O daemon superservidor de internet (usualmente chamado inetd) lanza varios\n"
+"outros servicios de internet cando se precisan. o responsable de iniciar\n"
+"moitos servicios, inclu韓do telnet, ftp, rsh, e rlogin. Desactivando inetd\n"
+"desact韛anse t骴olos servicios de internet dos que responsable."
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Croatian"
-msgstr "Croata"
+msgid "the height of the progress bar"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hungarian"
-msgstr "H鷑garo"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Gurmukhi"
+msgid "Argentina"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "Grego"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Nome de dominio"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Xeorxiano (\"latino\")"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Establecendo o nivel de seguridade"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Xeorxiano (\"ruso\")"
+msgid "Mount points must begin with a leading /"
+msgstr "Os puntos de montaxe deben empezar por /"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Franc閟"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Bases de datos"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Finnish"
-msgstr "Finland閟"
+msgid "Quit without saving"
+msgstr "Sa韗 sen gardar"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Spanish"
-msgstr "Espa駉l"
+msgid "Yemen"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EUA)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegu閟)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (EUA)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Danish"
-msgstr "Dinamarqu閟"
+msgid "Hard drive detection"
+msgstr "Detectar discos duros"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Devanagari"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Alem醤 (sen teclas acentuadas)"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Probe o seu rato"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "German"
-msgstr "Alem醤"
+msgid "Tajikistan"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
+msgid "Accept"
+msgstr "Aceptar"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
+msgid "Description"
+msgstr "Descrici髇"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Swiss (French layout)"
-msgstr "Su韟o (franc閟)"
+msgid "Error opening %s for writing: %s"
+msgstr "Erro abrir %s para escritura: %s"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Swiss (German layout)"
-msgstr "Su韟o (alem醤)"
+msgid "Mouse type: %s\n"
+msgstr "Tipo de rato: %s\n"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Belarusian"
-msgstr "Bielorruso"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware con XFree %s."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estonio"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Escolla a disposici髇 do seu teclado."
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "B鷏garo"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Armenio (fon閠ico)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bengali"
-msgstr "activar"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Expert Area"
+msgstr "羠ea de experto"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Belgian"
-msgstr "Belga"
+msgid "Choose a monitor"
+msgstr "Escolla o monitor"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaian (lat韓)"
+msgid "Empty label not allowed"
+msgstr "Etiqueta baleira non permitida"
#: ../../keyboard.pm:1
#, c-format
-msgid "Arabic"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fon閠ico)"
+msgid "I can't add any more partition"
+msgstr "Non posible engadir m醝s partici髇s"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenio (m醧uina de escribir)"
+msgid "Size in MB: "
+msgstr "Tama駉 en MB: "
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr "Armenio (antigo)"
+msgid "Remote printer"
+msgstr "Impresora remota"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish"
-msgstr "Polaco"
+msgid "Please choose a language to use."
+msgstr "Escolla a lingua que desexe usar."
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dvorak"
-msgstr "Teclado dvorak"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"AVISO: Este dispositivo foi configurado previamente para conectar "
+"Internet.\n"
+"Simplemente acepte para manter o dispositivo configurado.\n"
+"Se modifica os campos de embaixo, subsituir esta configuraci髇."
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "indiferente"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Zambia"
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"P骴ese configurar o ordenador para que se autentique automaticamente\n"
+"como un usuario. Se non quere usar esta caracter韘tica, prema o bot髇\n"
+"cancelar."
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Floppy format"
+msgstr "Formatar"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "serie"
+msgid "Generic Printers"
+msgstr "Impresora"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mayotte"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Yemen"
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Samoa"
-msgstr ""
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Primeiro sector da partici髇 de arranque"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Imprimindo p醲ina(s) de proba..."
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wallis and Futuna"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Vanuatu"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Pechar 醨bore"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Vietnam"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guam"
+msgstr "Xogos"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Virgin Islands (British)"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Venezuela"
-msgstr ""
+msgid "/Options/Test"
+msgstr "/Opci髇s/Proba"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
+"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa m醝s\n"
+"sinxelo de utilizar, pero moi sensible: non debe usarse nunha m醧uina\n"
+"conectada a outras ou Internet. Non hai contrasinais de acceso."
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Localizaci髇"
+msgid "Mounting partition %s"
+msgstr "Formatando a partici髇 %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr ""
+msgid "User name"
+msgstr "Nome de usuario"
-#: ../../lang.pm:1
-#, c-format
-msgid "Uruguay"
-msgstr ""
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "New configuration (isdn-light)"
+msgstr "etectouse unha configuraci髇 de firewall!"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Printerdrake"
+
+#: ../../install_interactive.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr ""
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "縌ue partici髇 desexa usar para Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Uganda"
-msgstr "Actualizaci髇"
+msgid "Backup system"
+msgstr "Sistemas de ficheiros"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Ukraine"
-msgstr "Ucra韓o"
+msgid "Test pages"
+msgstr "Probar portos"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Tanzania"
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Localizaci髇"
+msgid "Checking %s"
+msgstr "Resoluci髇: %s\n"
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Opci髇s da impresora de socket"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Memoria da tarxeta (DMA)"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Turkey"
-msgstr ""
+msgid "France"
+msgstr "Francia"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Tonga"
+msgid "browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Tunisia"
+msgid "Checking installed software..."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Nome do servidor"
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "緿esexa probar a impresi髇?"
#: ../../lang.pm:1
#, c-format
-msgid "Tokelau"
+msgid "Turkey"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Tajikistan"
+msgid "Alcatel speedtouch usb"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 bot髇s"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Thailand"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamita \"ringleira de n鷐eros\" QWERTY"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Rato"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Togo"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "French Southern Territories"
+msgid "Hardware"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Chad"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Turks and Caicos Islands"
+msgid "United States"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Swaziland"
-msgstr ""
+msgid "Default OS?"
+msgstr "縎O por omisi髇?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syria"
-msgstr ""
+msgid "Swiss (German layout)"
+msgstr "Su韟o (alem醤)"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "El Salvador"
+msgid "Configure all heads independently"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sao Tome and Principe"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "Nome de recurso compartido"
-
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Somalia"
-msgstr "Dominio NIS"
+msgid "NTP Server"
+msgstr "Servidor NIS"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Senegal"
-msgstr "activar"
+msgid "Load/Save on floppy"
+msgstr "Gardar nun disquete"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "San Marino"
+msgid "This theme does not yet have a bootsplash in %s !"
msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Sierra Leone"
-msgstr ""
+msgid "nice"
+msgstr "bo"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "Esloveno"
+msgid "Leaving in %d seconds"
+msgstr "%d segundos"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Escolla o porto serie onde est conectado o seu m骴em."
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "Esloveno"
+msgid "Country"
+msgstr "Montar"
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Helena"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Porto"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Singapore"
+msgid "Ghostscript"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Seychelles"
-msgstr "Shell"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "LAN Configuration"
+msgstr "Configuraci髇 da LAN"
#: ../../lang.pm:1
#, c-format
-msgid "Saudi Arabia"
+msgid "Ghana"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Rwanda"
+msgid "Path or Module required"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Ruso"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "Dominio NIS"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Reunion"
-msgstr "Resoluci髇"
+msgid "Advanced Options"
+msgstr "Configuraci髇 da LAN"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Qatar"
-msgstr "Estado:"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Coma bug"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Palau"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Paraguay"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Portugal"
-msgstr "Porto"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error installing packages:"
+msgstr "Houbo un erro instalar os paquetes:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Gardar a selecci髇 de paquetes"
+msgid "Lexmark inkjet configuration"
+msgstr "Configuraci髇 de Internet"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Puerto Rico"
-msgstr "Protocolo"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Undo"
+msgstr "Refacer"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "Impresora"
+msgid "Save partition table"
+msgstr "Escribir t醔oa de partici髇s"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr ""
+msgid "Finnish"
+msgstr "Finland閟"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Poland"
-msgstr "Island閟"
+msgid "Macedonia"
+msgstr "Macedonio"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Pakistan"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Philippines"
-msgstr ""
+msgid "Slovenian"
+msgstr "Esloveno"
#: ../../lang.pm:1
#, c-format
-msgid "Papua New Guinea"
+msgid "Libya"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "French Polynesia"
+msgid "Configuring scripts, installing software, starting servers..."
msgstr ""
+"Configurando os scripts, instalando o software, iniciando os servidores..."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Peru"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Panama"
-msgstr ""
+msgid "Table"
+msgstr "T醔oa"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, c-format
+msgid "I don't know how to format %s in type %s"
+msgstr "Desco耖cese o xeito de formatar %s de tipo %s"
+
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Oman"
-msgstr "Dominio NIS"
+msgid "Model"
+msgstr "Rato"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "New Zealand"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Niue"
-msgstr "bo"
+msgid "Stop Server"
+msgstr "Servidor NIS"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Nauru"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Rato"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Nepal"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nicaragua"
+msgid "Tuvalu"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "serie"
+#: ../../help.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Use auto detection"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Norfolk Island"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
msgstr ""
+"GPM engade soporte para o rato 醩 aplicaci髇s de texto de Linux, como\n"
+"o Midnight Commander. Tam閚 permite operaci髇s de cortar e pegar co rato\n"
+"na consola, as como incl鷈 soporte para men鷖."
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "Alto"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "New Caledonia"
-msgstr "Macedonio"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Started on boot"
+msgstr "Iniciado o arrincar"
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Namibia"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Mozambique"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malaysia"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mexico"
-msgstr "Rato"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Malawi"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Maldives"
+msgid "East Timor"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Mauritius"
-msgstr ""
+msgid "Del profile..."
+msgstr "Borrar perfil..."
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Malta"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Montserrat"
-msgstr "Porto do rato"
+msgid "Installing Foomatic..."
+msgstr "Instalando o paquete %s"
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Mauritania"
-msgstr ""
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Saia da sesi髇 e use Ctrl-Alt-BackSpace"
-#: ../../lang.pm:1
-#, c-format
-msgid "Martinique"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "detectouse %s"
-#: ../../lang.pm:1
-#, c-format
-msgid "Northern Mariana Islands"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr ""
+"Este paquete ten que ser actualizado\n"
+"縀st seguro de que quere deseleccionalo?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Mongolia"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Selecci髇 dos grupos de paquetes"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Myanmar"
+msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mali"
+msgid "SECURITY WARNING!"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Macedonia"
-msgstr "Macedonio"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Marshall Islands"
-msgstr ""
+msgid "StarOffice"
+msgstr "Office"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Madagascar"
-msgstr ""
+msgid "No, I don't want autologin"
+msgstr "Non, non quero login autom醫ico"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Moldova"
+msgid "Windows Migration tool"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, fuzzy, c-format
-msgid "Monaco"
-msgstr "Monitor"
+msgid "All languages"
+msgstr "Escoller a lingua"
-#: ../../lang.pm:1
-#, c-format
-msgid "Morocco"
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "Resoluci髇: %s\n"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Libya"
-msgstr ""
+msgid "Testing your connection..."
+msgstr "Probando a conexi髇..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Latvia"
-msgstr "Localizaci髇"
+msgid "Cache size"
+msgstr "tama駉 do bloque de datos"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Luxembourg"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
+"Os contrasinais est醤 activados, pero o uso como ordenador de rede a韓da\n"
+"non se recomenda."
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Lithuania"
-msgstr ""
+msgid "Start sector: "
+msgstr "Sector inicial: "
#: ../../lang.pm:1
#, c-format
-msgid "Lesotho"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Liberia"
-msgstr "serie"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Este paquete ten que ser actualizado\n"
+"縀st seguro de que quere deseleccionalo?"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Seychelles"
+msgstr "Shell"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sri Lanka"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Sen contrasinal"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liechtenstein"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Saint Lucia"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Lebanon"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Laos"
+msgid "Sorry, we support only 2.4 kernels."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwerty)"
+msgstr "Ruso (Yawerty)"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kazakhstan"
+msgid "Under Devel ... please wait."
msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Cayman Islands"
+msgid "Czech Republic"
msgstr ""
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Kuwait"
-msgstr "Sa韗"
+msgid "Egypt"
+msgstr "Baleiro"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, fuzzy, c-format
-msgid "Korea"
-msgstr "M醝s"
+msgid "Old configuration (isdn4net)"
+msgstr "etectouse unha configuraci髇 de firewall!"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Korea (North)"
+msgid "Sound card"
+msgstr "Tarxeta de son"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Formatar partici髇s"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"Ten unha partici髇 FAT grande\n"
+"(xeralmente usada por Microsoft Dos/Windows).\n"
+"Acons閘lase que primeiro a redimensione\n"
+"(prema nela, e logo en \"Redimensionar\")"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Saint Kitts and Nevis"
+msgid "Suppress Temporary Files"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Comoros"
-msgstr ""
+msgid "Change partition type"
+msgstr "Mudar o tipo de partici髇"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Kiribati"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Opci髇s do m骴ulo:"
+
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Cambodia"
+msgid ""
+"Display theme\n"
+"under console"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Kyrgyzstan"
+msgid "Statistics"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, fuzzy, c-format
-msgid "Kenya"
-msgstr "Teclado"
+msgid "(on %s)"
+msgstr "(m骴ulo %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Japan"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iraniano"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Jamaica"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Iceland"
-msgstr "Island閟"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "average"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Iraniano"
+msgid "New printer name"
+msgstr "Sen impresora"
#: ../../lang.pm:1
#, c-format
-msgid "Iraq"
+msgid "Equatorial Guinea"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "India"
-msgstr "Iraniano"
+msgid "Build Backup"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "Israel"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Ireland"
-msgstr "Island閟"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Indonesia"
-msgstr "ning鷑"
+msgid "Romanian (qwertz)"
+msgstr "Ruso (Yawerty)"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Hungary"
-msgstr "H鷑garo"
+msgid "Write Config"
+msgstr "reconfigurar"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Haiti"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Croatia"
-msgstr "Croata"
+"O daemon routed permite actualizaci髇s autom醫icas da t醔oa de\n"
+"encami馻mento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
+"en redes pequenas, outros protocolos m醝s complexos de encami馻mento\n"
+"prec韘anse para redes m醝s complexas."
#: ../../lang.pm:1
#, c-format
-msgid "Honduras"
+msgid "Kiribati"
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Hong Kong"
+msgid "Browse"
msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "China"
+msgid "CDROM"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Guyana"
-msgstr ""
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "縌uere probar agora a conexi髇 Internet?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Guinea-Bissau"
+msgid "Belgian"
+msgstr "Belga"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "縏en algunha outra?"
+
+#: ../../network/ethernet.pm:1
+#, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
+"Non se detectou ning鷑 adaptador de rede ethernet no seu sistema.\n"
+"Non se pode configurar este tipo de conexi髇."
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Guam"
-msgstr "Xogos"
+msgid "Windows"
+msgstr "Dominio NIS"
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "Pasarela"
+msgid "Can't make screenshots before partitioning"
+msgstr "Non posible engadir m醝s partici髇s"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Nome de m醧uina"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr ""
+msgid "/File/Save _As"
+msgstr "/Ficheiro/Gardar _como"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Equatorial Guinea"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Guadeloupe"
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guinea"
-msgstr "Xeral"
+#: ../../any.pm:1
+#, c-format
+msgid "Delay before booting default image"
+msgstr "Retardo antes de arrincar a imaxe por omisi髇"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Gambia"
-msgstr ""
+msgid "Restrict command line options"
+msgstr "Restrinxir opci髇s da li馻 de comandos"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Greenland"
-msgstr "Island閟"
+msgid "East Europe"
+msgstr "Europa"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Gibraltar"
-msgstr ""
+msgid "Use free space"
+msgstr "Usar espacio libre"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Ghana"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "Franc閟"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Georgia"
-msgstr "Noruegu閟"
+msgid "use dhcp"
+msgstr "usar dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Grenada"
+msgid "Mail alert"
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr ""
+msgid "Internet configuration"
+msgstr "Configuraci髇 de Internet"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
+msgid "Uzbekistan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "Island閟"
+msgid "Detected %s"
+msgstr "detectouse %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Micronesia"
-msgstr "Macedonio"
+msgid "/Autodetect _printers"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Fiji"
+msgid "Finish"
msgstr "Finalizar"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Finland"
+msgid "Show automatically selected packages"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Estonio"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Spain"
-msgstr "Espa駉l"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "羠ea de experto"
-
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Western Sahara"
+msgid "CPU flags reported by the kernel"
msgstr ""
#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "Baleiro"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Estonio"
+#, c-format
+msgid "Togo"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ecuador"
+msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "serie"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr ""
+msgid "Please try again"
+msgstr "Tente de novo"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Dominica"
-msgstr "Dominio NIS"
+msgid "The model is correct"
+msgstr "可 isto correcto?"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Denmark"
-msgstr ""
+msgid "FAT resizing failed: %s"
+msgstr "O redimensionamento da FAT fallou: %s"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "Abortar"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Individual package selection"
+msgstr "Selecci髇 individual de paquetes"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cyprus"
-msgstr ""
+msgid "This partition is not resizeable"
+msgstr "Esta partici髇 non se pode redimensionar"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Christmas Island"
+msgid "Location"
+msgstr "Localizaci髇"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable-hrc)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "Pechar 醨bore"
+msgid "Journalised FS"
+msgstr "mount fallou"
#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Pasarela"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "M醧uina:"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cuba"
-msgstr ""
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Letra de unidade DOS: %s (aproximaci髇)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Colombia"
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Cameroon"
+msgid "Bahrain"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Chile"
-msgstr "Rato"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Cook Islands"
-msgstr ""
+msgid "omit scsi modules"
+msgstr "omitir os m骴ulos scsi"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Cote d'Ivoire"
+msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Switzerland"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
+"Como est a facer unha instalaci髇 de rede, esta xa est configurada.\n"
+"Prema Aceptar para manter a configuraci髇, ou Cancelar para reconfigurar a "
+"conexi髇 de rede e Internet.\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "Disposici髇 do teclado: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Central African Republic"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
+msgid "Maltese (US)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
+"Monta e desmonta t骴olos puntos de montaxe de sistemas de\n"
+"ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Canada"
-msgstr "Canadiano (Qu閎ec)"
+msgid "Tvcard"
+msgstr "Tarxeta de TV"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Belize"
-msgstr "Redimensionar"
+msgid "Toggle between normal/expert mode"
+msgstr "Mudar a modo normal"
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Size"
+msgstr "Tama駉"
+
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Belarus"
-msgstr "Bielorruso"
+msgid "GRUB"
+msgstr "GB"
#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Botswana"
-msgstr "Estonio"
+msgid "Greenland"
+msgstr "Island閟"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Bouvet Island"
-msgstr ""
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bhutan"
+msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Bahamas"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
+"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
+"Actualmente est activada.\n"
+"\n"
+"縌ue desexa facer?"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Seleccione un ficheiro"
+
+#: ../../help.pm:1
#, c-format
-msgid "Brazil"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Bolivia"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr ""
+msgid "Which configuration of XFree do you want to have?"
+msgstr "縌ue configuraci髇 de XFree quere usar?"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "Alem醤"
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "More"
+msgstr "M醝s"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Benin"
-msgstr "Belga"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"Con este nivel de seguridade, posible usar este sistema coma servidor.\n"
+"A seguridade agora alta dabondo para usar o sistema coma un servidor\n"
+"que acepta conexi髇s de m鷏tiples clientes."
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Account Password"
+msgstr "Contrasinal da conta"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Bahrain"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "H鷑garo"
+msgid "Tajik keyboard"
+msgstr "Teclado Thai"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Burkina Faso"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Punto de montaxe"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Barbados"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Iraniano"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "serie"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Select file"
+msgstr "Seleccione un ficheiro"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "American Samoa"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Argentina"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Antarctica"
+msgid "Japan"
msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Opci髇s da impresora"
+
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Angola"
+msgid "The change is done, but to be effective you must logout"
msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "Servidor DNS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Netherlands Antilles"
+msgid "NCP queue name missing!"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "Armenio (antigo)"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "Iraniano"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom etiquetado \"%s\""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Anguilla"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
msgstr ""
+"Garda e restaura o estado da entrop韆 do sistema para unha xeraci髇\n"
+"de n鷐eros aleatorios de calidade."
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Antigua and Barbuda"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "United Arab Emirates"
+msgid "Turn your computer into a reliable server"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Andorra"
-msgstr "Refacer"
+#: ../../network/network.pm:1
+#, c-format
+msgid " (driver %s)"
+msgstr " (controlador %s)"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Iraniano"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr "Ficheiro(s) loopback: %s\n"
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Puntos de montaxe circulares %s\n"
+msgid "I don't know"
+msgstr "Non sei"
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Quitar primeiro os volumes l髕icos\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ""
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
msgstr ""
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "OVA A RODA!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Sa韗 da instalaci髇"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Please test the mouse"
-msgstr "Probe o seu rato"
+msgid " ("
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Ning鷑 rato"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Establecendo o nivel de seguridade"
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "ning鷑"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Azerbaian (cir韑ico)"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "3 buttons"
-msgstr "3 bot髇s"
+msgid "Add a module"
+msgstr "Engadir un m骴ulo"
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "2 buttons"
-msgstr "2 bot髇s"
+msgid "Profile to delete:"
+msgstr "Perfil para borrar:"
-#: ../../mouse.pm:1
-#, c-format
-msgid "1 button"
-msgstr "1 bot髇"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Impresora local"
#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "busmouse"
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Login da conta (nome de usuario)"
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Rato Logitech (serie, antigo tipo C7)"
+msgid "Fdiv bug"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Belga"
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Uruguay"
+msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Gardar a selecci髇 de paquetes"
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Est a acontecer algo grave coa s鷄 unidade.\n"
+"A proba para verificar a integridade dos datos fallou.\n"
+"Isto significa que calquera escritura no disco producir lixo aleatorio"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Servidor de impresi髇"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Escolla os paquetes que desexa instalar."
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Rato de 3 bot髇s xen閞ico"
+msgid "Bangladesh"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Rato de 2 bot髇s xen閞ico"
+msgid "Japan (cable)"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "serial"
-msgstr "serie"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Initial tests"
+msgstr "Mensaxe inicial"
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Wheel"
-msgstr "Roda"
+msgid "Continue"
+msgstr "Continuar"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Generic"
-msgstr "Xen閞ico"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "Personalizado"
-#: ../../mouse.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Script-based"
+msgstr "Baseado nun script"
-#: ../../mouse.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato de roda PS2 xen閞ico"
+msgid "Error reading file %s"
+msgstr "Erro lendo o ficheiro %s"
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Formatando"
-#: ../../mouse.pm:1 ../../security/level.pm:1
-#, c-format
-msgid "Standard"
-msgstr "Est醤dar"
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Debe ter unha partici髇 de intercambio"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "Rato Sun"
+msgid " on "
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre lista completa e ordenada por grupos"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr "O proxy deber韆 ser http://..."
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Collapse Tree"
-msgstr "Pechar 醨bore"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "Expandir 醨bore"
+msgid "Other OS (SunOS...)"
+msgstr "Outros SO (SunOS...)"
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Info"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Instalar/Actualizar"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Is this correct?"
-msgstr "可 isto correcto?"
+msgid "%d packages"
+msgstr "%d paquetes"
-#: ../../my_gtk.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
msgstr ""
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro escribindo ficheiro %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Fallou a restauraci髇 a partir do ficheiro %s: %s"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Autenticaci髇"
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-"Ten un burato na t醔oa de partici髇s, pero non se pode usar.\n"
-"A 鷑ica soluci髇 desprazar as partici髇s primarias para que\n"
-"o burato est despois das partici髇s estendidas"
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "As partici髇s estendidas non est醤 soportadas nesta plataforma"
+msgid "Costa Rica"
+msgstr ""
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "mount fallou: "
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "Escolla as opci髇s para o servidor"
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "maybe"
-msgstr "indiferente"
+msgid "Icelandic"
+msgstr "Island閟"
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "nice"
-msgstr "bo"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "very nice"
-msgstr "moi bo"
+msgid "Please relog into %s to activate the changes"
+msgstr "Entre de novo en %s para activar os cambios"
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid "important"
-msgstr "importante"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
-#: ../../pkgs.pm:1
-#, c-format
-msgid "must have"
-msgstr "debe telo"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Lilo/grub mode"
+msgstr "Modo de marcaci髇"
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non hai partici髇s dabondo para o nivel RAID %d\n"
+msgid "Output"
+msgstr "Sa韉a"
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid fallou"
+msgid "Circular mounts %s\n"
+msgstr "Puntos de montaxe circulares %s\n"
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallou (縫ode que non estean as raidtools?)"
+msgid "Martinique"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non se pode engadir unha partici髇 RAID _formatado_ md%d"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sector"
+msgid "a number"
+msgstr "N鷐ero de tel閒ono"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Estado:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swedish"
+msgstr "Sueco"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "On boot"
-msgstr " arrincar"
+msgid "Which %s driver should I try?"
+msgstr "縌ue controlador de %s desexa probar?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"Non hai informaci髇 adicional\n"
-"sobre este servicio, desculpe."
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Services and deamons"
-msgstr "Servicios e daemons"
+msgid "Filesystem types:"
+msgstr "Tipos de sist. de ficheiros:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "stopped"
-msgstr "parado"
+msgid ", multi-function device on HP JetDirect"
+msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "running"
-msgstr "a se executar"
+msgid "Northern Mariana Islands"
+msgstr ""
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"
+msgid "none"
+msgstr "ning鷑"
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Bases de datos"
+msgid "user :"
+msgstr "Nome de usuario"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Opci髇s da impresora remota lpd"
+msgid "Please enter your password"
+msgstr "Tente de novo"
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "File sharing"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-#: ../../services.pm:1
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Printing"
-msgstr "Impresora"
+msgid "Floppy"
+msgstr "Gardar nun disquete"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Executa e para o Servidor de Fontes X arrincar e apagar."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Prema nunha partici髇"
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+msgid "Ghostscript referencing"
msgstr ""
-"O syslog o m閠odo que usan moitos daemons para rexistrar mensaxes\n"
-"nos diversos ficheiros de rexistro do sistema. unha boa idea executar\n"
-"sempre o syslog."
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lanzar o sistema X-Window iniciar"
+msgid "Bootloader"
+msgstr "Cargador de arrinque que usar"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que os usuarios remotos obte馻n unha lista de\n"
-"t骴olos usuarios conectados a unha m醧uina que est a executar o daemon\n"
-"rwho (similar finger)."
+msgid "Move"
+msgstr "Desprazar"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite 髎 usuarios dunha rede identificar quen\n"
-"est conectado noutras m醧uinas activas."
+msgid "Bootloader to use"
+msgstr "Cargador de arrinque que usar"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite 髎 usuarios dunha rede obter\n"
-"m閠ricas de rendemento de calquera m醧uina desa rede."
+msgid "SMB server host"
+msgstr "Servidor de SMB"
-#: ../../services.pm:1
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite actualizaci髇s autom醫icas da t醔oa de\n"
-"encami馻mento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
-"en redes pequenas, outros protocolos m醝s complexos de encami馻mento\n"
-"prec韘anse para redes m醝s complexas."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "Servidor NIS"
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Garda e restaura o estado da entrop韆 do sistema para unha xeraci髇\n"
-"de n鷐eros aleatorios de calidade."
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"Postfix un axente de transporte de correo (MTA), que o programa\n"
-"que move o correo dunha m醧uina a outra."
#: ../../services.pm:1
#, c-format
msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-"O portmapper xestiona as conexi髇s RPC, que son usadas por protocolos\n"
-"como NFS e NIS. O servidor portmap ten que estar a se executar en m醧uinas\n"
-"que act鷄n de servidores de protocolos que usan o mecanismo RPC."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"O soporte PCMCIA normalmente para cousas como ethernet e m骴ems en\n"
-"port醫iles. Non ser arrincado ata que non estea configurado de xeito\n"
-"que non haxa problemas telo instalado en m醧uinas que non o precisan."
+msgid "4 billion colors (32 bits)"
+msgstr "4 mil mill髇s de cores (32 bits)"
-#: ../../services.pm:1
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Micronesia"
+msgstr "Macedonio"
-#: ../../services.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+msgid "License"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+msgid "This may take a moment to generate the keys."
msgstr ""
-"NFS un protocolo popular para compartir ficheiros a trav閟 de\n"
-"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-"NFS un protocolo popular para compartir ficheiros a trav閟 de redes TCP/"
-"IP.\n"
-"Este servicio fornece funcionalidade de servidor NFS, que se configura co\n"
-"ficheiro /etc/exports."
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Sagem (using pppoa) usb"
msgstr ""
-"Activa/desactiva t骴alas interfaces de rede configuradas para\n"
-"seren activadas no arrinque."
-#: ../../services.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"Monta e desmonta t骴olos puntos de montaxe de sistemas de\n"
-"ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."
+"Ocorreu un erro - non se atopou ning鷑 dispositivo v醠ido para crear novos "
+"sistemas de ficheiros. Verifique o seu equipo para ver a raz髇 deste problema"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) un servidor de nomes de dominio (DNS), que se emprega\n"
-"para converter os nomes de m醧uinas a enderezos IP."
+msgid "Starting the printing system at boot time"
+msgstr "縌ue sistema de impresi髇 desexa usar?"
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
+msgid "Do you want to start the connection at boot?"
+msgstr "緿esexa que a conexi髇 se inicie arrincar?"
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "Processor ID"
msgstr ""
-"lpd o daemon de impresi髇 requirido para que o lpr funcione\n"
-"correctamente. basicamente un servidor que distrib鷈 os traballos de\n"
-"impresi髇 (s) impresora(s)."
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Sound trouble shooting"
msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
+msgid "Polish (qwerty layout)"
+msgstr "Polaco (disposici髇 qwerty)"
-#: ../../services.pm:1
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "Activar"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
msgstr ""
-"Este paquete carga o mapa de teclado seleccionado en /etc/sysconfig/"
-"keyboard.\n"
-"Este pode escollerse usando a utilidade kbdconfig. Deber韆 deixar isto\n"
-"activado para a maior韆 dos sistemas."
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "Host \"%s\", port %s"
msgstr ""
-"O daemon superservidor de internet (usualmente chamado inetd) lanza varios\n"
-"outros servicios de internet cando se precisan. o responsable de iniciar\n"
-"moitos servicios, inclu韓do telnet, ftp, rsh, e rlogin. Desactivando inetd\n"
-"desact韛anse t骴olos servicios de internet dos que responsable."
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache un servidor de World Wide Web. 趕ase para servir ficheiros HTML\n"
-"e CGI."
+msgid "This partition can't be used for loopback"
+msgstr "Esta partici髇 non pode usarse para loopback"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
+msgid "File already exists. Use it?"
+msgstr "O ficheiro xa existe. 縐salo?"
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "received: "
msgstr ""
-"GPM engade soporte para o rato 醩 aplicaci髇s de texto de Linux, como\n"
-"o Midnight Commander. Tam閚 permite operaci髇s de cortar e pegar co rato\n"
-"na consola, as como incl鷈 soporte para men鷖."
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+msgid "Right Alt key"
msgstr ""
-"O cron un programa est醤dar de UNIX que executa programas especificados\n"
-"polo usuario en datas peri骴icas programadas. O vixie cron engade algunhas\n"
-"caracter韘ticas cron b醩ico de UNIX, incluindo mellor seguridade e\n"
-"opci髇s de configuraci髇 m醝s potentes."
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-"Executa os comandos programados polo comando at hora indicada cando\n"
-"se executou at, e lanza comandos de lotes cando a carga media baixa\n"
-"dabondo."
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd 鷖ase para monitorizar o estado da bater韆 e rexistralo a trav閟 do\n"
-"syslog. Tam閚 pode usarse para apagar a m醧uina cando a bater韆 est baixa."
+msgid "Gateway"
+msgstr "Pasarela"
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Impresora"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, un xestor de comandos peri骴icos."
+msgid "Tonga"
+msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "Tunisia"
msgstr ""
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Instalando o paquete %s"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Profile: "
+msgstr "Perfil: "
-#: ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "XawTV isn't installed!"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"Create/Transfer\n"
+"backup keys for SSH"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "old static device name used in dev package"
msgstr ""
-#: ../../standalone.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr "Esta etiqueta xa se est a usar"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr " formatar a partici髇 %s, perderanse t骴olos datos desta partici髇"
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Teclado"
+msgid "Connection Time: "
+msgstr "Tipo de conexi髇: "
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+msgid "select perm file to see/edit"
msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
+"Por favor, insira o Cd-Rom de instalaci髇 na unidade e prema Aceptar.\n"
+"Se non o ten, prema Cancelar para evitar a actualizaci髇 "
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use group id for execution"
+msgstr "Usar detecci髇 autom醫ica"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+msgid "Choose the default user:"
+msgstr "Escolla o usuario por defecto:"
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
+msgid "Gabon"
msgstr ""
-#: ../../standalone.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"Cun servidor CUPS remoto, non ter que configurar aqu韁n"
+"ningunha impresora, xa que ser醤 detectadas automaticamente.\n"
+"No caso de d鷅ida, seleccione \"Servidor CUPS remoto\"."
-#: ../../steps.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Exit install"
-msgstr "Sa韗 da instalaci髇"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Pode escoller outras linguas que estar醤 dispo駃bles trala instalaci髇"
-#: ../../steps.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure services"
-msgstr "Configurar servicios"
+msgid "Domain"
+msgstr "Dominio NIS"
-#: ../../steps.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure X"
-msgstr "Configurar as X"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Tama駉 exacto de memoria se for necesario (atop醨onse %d MB)"
-#: ../../steps.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "Cargador de arrinque"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Configure networking"
-msgstr "Configurar a rede"
+msgid "Provider dns 2 (optional)"
+msgstr "Dns 2 do provedor (opcional)"
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Add a user"
-msgstr "Engadir usuario"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "Sen contrasinal"
+msgid "Boot device"
+msgstr "Dispositivo de arrinque"
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Install system"
-msgstr "Instalar sistema"
+msgid "Which partition do you want to resize?"
+msgstr "縌ue partici髇 desexa redimensionar?"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose packages to install"
-msgstr "Seleccionar paquetes"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Format partitions"
-msgstr "Formatar partici髇s"
+msgid "A tool to monitor your logs"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Impresora"
+msgid "Djibouti"
+msgstr "Abortar"
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "Escoller teclado"
+msgid "detected on port %s"
+msgstr "detectado no porto %s"
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Select installation class"
-msgstr "Clase de instalaci髇"
+msgid "LPD"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Hard drive detection"
-msgstr "Detectar discos duros"
+msgid "Graphics card: %s\n"
+msgstr "Tarxeta gr醘ica: %s\n"
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Configure mouse"
-msgstr "Configurar o rato"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../steps.pm:1
-#, c-format
-msgid "License"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Prema nunha partici髇"
-#: ../../steps.pm:1
-#, c-format
-msgid "Language"
-msgstr "Escoller a lingua"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Gardar a selecci髇 de paquetes"
-#: ../../ugtk2.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "utopia 25"
-msgstr ""
+msgid "Extended partition not supported on this platform"
+msgstr "As partici髇s estendidas non est醤 soportadas nesta plataforma"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "OK"
-msgstr "Aceptar"
+msgid "ISDN Configuration"
+msgstr "Configuraci髇 da RDSI"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "logdrake"
-msgstr "draknet"
+msgid "high"
+msgstr "Alto"
-#: ../../ugtk.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
+msgid "Internet Connection Sharing"
+msgstr "Compartici髇 da conexi髇 Internet"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Xpmac (installation display driver)"
+msgid "Choose file"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware, pero s con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE EXPERIMENTAL E PODE COLGAR O SISTEMA."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleraci髇 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware con XFree %s."
+"tenci髇! Detectouse unha configuraci髇 de firewall existente. Pode que "
+"te馻 que facer alg鷑 arranxo manual trala instalaci髇."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleraci髇 3D por hardware"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Desactivando a rede"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
msgstr ""
-"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware, pero s con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE EXPERIMENTAL E PODE COLGAR O SISTEMA.\n"
-"A s鷄 tarxeta est soportada por XFree %s, que pode ter un mellor soporte en "
-"2D."
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware, pero s con\n"
-"XFree %s. A tarxeta est soportada por XFree %s, que pode ter un mellor\n"
-"soporte en 2D."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Conexi髇 da impresora"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Rato de roda PS2 xen閞ico"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Axudante da configuraci髇 de rede"
+msgid "Removing old printer \"%s\"..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Use Xinerama extension"
-msgstr "Usar detecci髇 autom醫ica"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "縌ue configuraci髇 de XFree quere usar?"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree configuration"
-msgstr "Configuraci髇 de XFree"
+msgid "Select a device !"
+msgstr "Seleccione unha tarxeta gr醘ica"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Seleccione a cantidade de memoria da tarxeta gr醘ica"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Eliminar fila"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+msgid "French Southern Territories"
msgstr ""
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Multi-head configuration"
-msgstr "lendo a configuraci髇"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "X server"
-msgstr "Servidor X"
+msgid "the vendor name of the processor"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB ou m醝s"
+msgid "All data on this partition should be backed-up"
+msgstr "Deber韆 facer unha copia de seguridade dos datos desta partici髇"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Installing package %s"
+msgstr "Instalando o paquete %s"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Para ter m醝s partici髇s, borre unha para poder crear unha partici髇 "
+"estendida"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Choose packages to install"
+msgstr "Seleccionar paquetes"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "512 kB"
-msgstr "512 KB"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"Perderanse TODAS as partici髇s existentes e os seus datos na unidade %s"
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "256 kB"
-msgstr "256 KB"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"O seu sistema non ten espacio libre dabondo para a instalaci髇 ou "
+"actualizaci髇 (%d > %d)"
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-"縈anter os cambios?\n"
-"A configuraci髇 actual :\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Options"
-msgstr "Opci髇s"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test"
+msgid "Bhutan"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Resolution"
-msgstr "Resoluci髇"
+msgid "Network interface"
+msgstr "Interface de rede"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer data..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
-#: ../../Xconfig/main.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Tarxeta gr醘ica"
+msgid "Korean keyboard"
+msgstr "Brit醤ico"
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de actualizaci髇 vertical"
+msgid "Not connected"
+msgstr "Non conectado"
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de actualizaci髇 horizontal"
+msgid "Greek"
+msgstr "Grego"
-#: ../../Xconfig/monitor.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Arguments: (arg)\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
msgstr ""
-"Os dous par醡etros cr韙icos son a taxa de actualizaci髇 vertical, que\n"
-"indica a frecuencia coa que a pantalla completa actualizada, e m醝s\n"
-"importante a韓da a taxa de sincronismo horizontal, que a\n"
-"frecuencia coa que se mostran as li馻s de barrido horizontal.\n"
-"\n"
-" MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
-"de frecuencias de sincronismo superior capacidade real do seu monitor,\n"
-"xa que pode danalo.\n"
-"No caso de d鷅ida, escolla unha configuraci髇 conservadora."
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "Saint Kitts and Nevis"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Refacer"
-
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Plug'n Play"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
msgstr ""
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Choose a monitor"
-msgstr "Escolla o monitor"
-
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Tarxeta gr醘ica: %s"
-
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Escolla a resoluci髇 e a profundidade de cor"
-
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolutions"
-msgstr "Resoluci髇s"
-
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 mil mill髇s de cores (32 bits)"
+msgid "Enable OF Boot?"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 mill髇s de cores (24 bits)"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Non pode usar JFS para partici髇s m醝s pequenas que 16MB"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Frecuencia vertical do monitor: %s\n"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
+msgid "path"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "可 isto correcto?"
-
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segundos"
+msgid "Mount point"
+msgstr "Punto de montaxe"
#: ../../Xconfig/test.pm:1
#, c-format
@@ -6682,1418 +6647,1383 @@ msgid ""
"Try to change some parameters"
msgstr ""
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: probar esta tarxeta gr醘ica pode colgar o ordenador"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "緿esexa probar a configuraci髇?"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Test of the configuration"
-msgstr "Proba da configuraci髇"
-
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "縌ue tipo de conexi髇 RDSI ten?"
+msgid "Restore system"
+msgstr "Instalar sistema"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "The DHCP end ip"
msgstr ""
-"P骴ese configurar o seu ordenador para que entre automaticamente\n"
-"en X arrincar. 緿esexa que se execute X reiniciar?"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Lanzar X11 arrincar"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de XFree86: %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "Internet"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
+msgid "Drakbackup"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluci髇: %s\n"
+msgid "Colombia"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memoria da tarxeta gr醘ica: %s KB\n"
+msgid "Plug'n Play"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Tarxeta gr醘ica: %s\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Reunion"
+msgstr "Resoluci髇"
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical do monitor: %s\n"
+msgid "Details"
+msgstr "Detalles"
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal do monitor: %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do rato: %s\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "縌ue sistema de impresi髇 desexa usar?"
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de rato: %s\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Impresora"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposici髇 do teclado: %s\n"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Options: %s"
-msgstr "Opci髇s: %s"
+msgid "Mongolia"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "Punto de montaxe: "
+msgid "Mounted\n"
+msgstr "Montado\n"
-#: ../../diskdrake/dav.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Server: "
-msgstr "Servidor"
+msgid "Graphical Interface"
+msgstr "Lanzar X11 arrincar"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "O proxy deber韆 ser http://..."
+msgid "Restore Users"
+msgstr "Restaurar a partir dun ficheiro"
-#: ../../diskdrake/dav.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Probe o seu rato"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Punto de montaxe"
-
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "Montar"
+msgid "Encryption key for %s"
+msgstr "Os contrasinais non coinciden"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Unmount"
-msgstr "Desmontar"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"O portmapper xestiona as conexi髇s RPC, que son usadas por protocolos\n"
+"como NFS e NIS. O servidor portmap ten que estar a se executar en m醧uinas\n"
+"que act鷄n de servidores de protocolos que usan o mecanismo RPC."
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "New"
-msgstr "novo"
+msgid "Detected hardware"
+msgstr "Mire a informaci髇 sobre o hardware"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+msgid "Mauritius"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' no seu lugar"
+msgid "Myanmar (Burmese)"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "Tipo"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Enabling swap partition %s"
+msgstr "Formatando a partici髇 %s"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Non hai partici髇s FAT para redimensionar ou para usar como loopback (ou non "
+"hai espacio libre dabondo)"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Delete"
-msgstr "Borrar"
+msgid "Armenian (old)"
+msgstr "Armenio (antigo)"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Create"
-msgstr "Crear"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Filesystem types:"
-msgstr "Tipos de sist. de ficheiros:"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Empty"
-msgstr "Baleiro"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Windows"
-msgstr "Dominio NIS"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Monaco"
+msgstr "Monitor"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "%s formatting of %s failed"
+msgstr "O formato %s de %s fallou"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Swap"
-msgstr "Intercambio"
+msgid "Partitioning failed: %s"
+msgstr "O particionamento fallou: %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "mount fallou"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Canada (cable)"
+msgstr "Canadiano (Qu閎ec)"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Impresora local"
+msgid "Upgrade"
+msgstr "Actualizaci髇"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "Prema nunha partici髇"
+msgid "Workstation"
+msgstr "Estaci髇 de traballo"
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Installing package %s\n"
+"%d%%"
msgstr ""
-"Ten unha partici髇 FAT grande\n"
-"(xeralmente usada por Microsoft Dos/Windows).\n"
-"Acons閘lase que primeiro a redimensione\n"
-"(prema nela, e logo en \"Redimensionar\")"
+"Instalando o paquete %s\n"
+"%d%%"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose action"
-msgstr "Escolla a acci髇"
+msgid "Kyrgyzstan"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Documentaci髇"
+
+#: ../../services.pm:1
#, c-format
-msgid "Wizard"
-msgstr "Axudante"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, un xestor de comandos peri骴icos."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
-"Se ten pensado usar aboot, te馻 coidado de deixar un espacio libre (2048\n"
-"sectores abondan) no inicio do disco"
+"Ten que ter unha partici髇 ra韟.\n"
+"Para iso, faga unha partici髇 (ou prema nunha que xa exista).\n"
+"Ent髇 escolla a acci髇 ``Punto de montaxe'', e as骳ieo a `/'"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Faga primeiro unha copia de seguridade dos seus datos"
+msgid "Proxy should be http://..."
+msgstr "O proxy deber韆 ser http://..."
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Read carefully!"
-msgstr "ea coidadosamente!"
+msgid "South Africa"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key (again)"
+msgid "Western Sahara"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Encryption key"
+msgid "Etherboot Floppy/ISO"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Os contrasinais non coinciden"
+msgid "Modify printer configuration"
+msgstr "Configuraci髇 de Internet"
#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal demasiado simple (ten que ter polo menos %d caracteres)"
+msgid "Choose a partition"
+msgstr "Escolla a acci髇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid "Edit current rule"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "no bus %d id %d\n"
+msgid "%s"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de t醔oa de partici髇s: %s\n"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
+msgid "Please test the mouse"
+msgstr "Probe o seu rato"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Info: "
-msgstr "Info: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Outros"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Xeometr韆: %s cilindros, %s cabezas, %s sectores\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "Tama駉: %s\n"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-only"
-msgstr ""
+msgid "Sector"
+msgstr "Sector"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Device: "
-msgstr "Dispositivo: "
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Qatar"
+msgstr "Estado:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "LDAP Base dn"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"You can't select this package as there is not enough space left to install it"
msgstr ""
+"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
+"instalalo"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Xerar disquete de auto-instalaci髇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
+msgid "Dialing mode"
+msgstr "Modo de marcaci髇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tama駉 do bloque de datos %s\n"
+msgid "File sharing"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
+msgid "Clean /tmp at each boot"
+msgstr "Baleirar /tmp en cada arrinque"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+msgid "Malawi"
msgstr ""
-"Partici髇 de arrinque por omisi髇\n"
-" (para arrincar en MS-DOS, non para lilo)\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
+msgid "Please choose your type of mouse."
+msgstr "Escolla o seu tipo de rato."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "class of hardware device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "Montado\n"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "Non formatado\n"
+msgid "United Kingdom"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d a cilindro %d\n"
+msgid "running"
+msgstr "a se executar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
+msgid "default"
+msgstr "defecto"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "Tama駉: %s"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Indonesia"
+msgstr "ning鷑"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicio: sector %s\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Francia"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Name: "
-msgstr "Nome: "
+msgid "restrict"
+msgstr "restrinxir"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra de unidade DOS: %s (aproximaci髇)\n"
+msgid "must have"
+msgstr "debe telo"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "partition %s is now known as %s"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resoluci髇: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Copying %s"
-msgstr ""
+msgid "Senegal"
+msgstr "activar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
+msgid "Command line"
+msgstr "Nome de dominio"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid fallou"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
+#: ../../any.pm:1
+#, c-format
+msgid "access to administrative files"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr " formatar a partici髇 %s, perderanse t骴olos datos desta partici髇"
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
+msgid ", multi-function device on parallel port \\#%s"
msgstr ""
-"Necesitar reiniciar o equipo para que a modificaci髇 sexa tomada en conta"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "scribirase disco a t醔oa de partici髇s da unidade %s!"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"縀st seguro de que quere deseleccionalo?"
+msgid "Montserrat"
+msgstr "Porto do rato"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "縌u tipo de particionamento quere?"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Te馻 coidado: esta operaci髇 perigosa."
+msgid "Swap"
+msgstr "Intercambio"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "tama駉 do bloque de datos"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Conectar Internet"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "nivel"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Restaurar a partir dun ficheiro"
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "device"
-msgstr "dispositivo"
+msgid "TV card"
+msgstr "Tarxeta de TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Impresora SMB/Windows 95/98/NT"
+
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Various"
+msgid ", "
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Opci髇s do m骴ulo:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "O ficheiro xa existe. 縐salo?"
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "O ficheiro xa est a ser usado por outro loopback, escolla outro"
+msgid "Remove selected host/network"
+msgstr "Eliminar fila"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Nome real"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix un axente de transporte de correo (MTA), que o programa\n"
+"que move o correo dunha m醧uina a outra."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Filesystem type: "
-msgstr "Tipo de sist. de ficheiros: "
+msgid "Disconnection from the Internet failed."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Size in MB: "
-msgstr "Tama駉 en MB: "
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Configuraci髇 da rede"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Esta partici髇 non pode usarse para loopback"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "Restaurar a partir dun disquete"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM name?"
-msgstr "縉ome do LVM?"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Est a piques de configurar o seu ordenador para que comparta a conexi髇 "
+"Internet.\n"
+"\n"
+"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
+"醨ea local (LAN)."
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "new"
-msgstr "novo"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Escolla o adaptador de rede que desexa usar para conectar Internet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Escolla un dos LVM para engadirlle"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Escolla un dos RAID para engadirlle"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Moving partition..."
-msgstr "Desprazando partici髇..."
+msgid "Internet Connection Sharing is now disabled."
+msgstr "A compartici髇 da conexi髇 Internet est agora desactivada."
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Moving"
-msgstr "Desprazando"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "緼 que sector desexa desprazala?"
+msgid "Latin American"
+msgstr "Latinoamericano"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Sector"
-msgstr "Sector"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Configurar a rede"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "緼 que disco desexa desprazala?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Seleccione un ficheiro"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move"
-msgstr "Desprazar"
+msgid "Info: "
+msgstr "Info: "
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "Tama駉 en MB: "
+msgid "Button `%s': %s"
+msgstr "Opci髇s: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Choose the new size"
-msgstr "Escoller o novo tama駉"
+msgid "Please wait"
+msgstr "Agarde, por favor"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Resize"
-msgstr "Redimensionar"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-" redimensionar a partici髇 %s, perderanse t骴olos datos desta partici髇"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Feito"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Deber韆 facer unha copia de seguridade dos datos desta partici髇"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "可 isto correcto?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "Esta partici髇 non se pode redimensionar"
+msgid "Ethernet Card"
+msgstr "Tarxeta Ethernet"
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando os l韒ites do sistema de ficheiros FAT"
+msgid "Info"
+msgstr "Info"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "縊nde desexa montar o dispositivo %s?"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Instalar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
msgstr ""
-"Non se pode quitar o punto de montaxe porque esta partici髇 estase a\n"
-"usar de loopback.\n"
-"Quite primeiro o loopback"
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "縊nde desexa montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "縊nde desexa montar o ficheiro loopback %s?"
+msgid "Exit install"
+msgstr "Sa韗 da instalaci髇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Switching from ext2 to ext3"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
+"Xa est todo configurado.\n"
+"Agora pode compartir a conexi髇 Internet con outros ordenadores da rede de "
+"醨ea local, usando a configuraci髇 autom醫ica de rede (DHCP)."
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "縌u sistema de ficheiros desexa?"
+msgid "Remote CUPS server"
+msgstr "Servidor CUPS remoto"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Change partition type"
-msgstr "Mudar o tipo de partici髇"
+msgid "Sun - Mouse"
+msgstr "Rato Sun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-" mudar o tipo da partici髇 %s, perderanse t骴olos datos desta partici髇"
+"S hai un adaptador de rede configurado no seu sistema:\n"
+"\n"
+"%s\n"
+"\n"
+"Vaise configurar a rede de 醨ea local usando ese adaptador."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Formatando o ficheiro loopback %s"
+msgid "Minimal install"
+msgstr "Desinstalar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Estonio"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "Devanagari"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Preference: "
-msgstr "Preferencia: "
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "Sector inicial: "
+msgid "Total size: %d / %d MB"
+msgstr "Tama駉 total: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create a new partition"
-msgstr "Crear unha nova partici髇"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "desactivar"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr "Usar para loopback"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Impresora local"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Modify RAID"
-msgstr "Modificar o RAID"
+msgid "Disabling servers..."
+msgstr "Desactivando os servidores..."
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "Quitar do LVM"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Escolla os paquetes que desexa instalar."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Remove from RAID"
-msgstr "Quitar do RAID"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Fallou a instalaci髇 do %s. Ocorreu o erro seguinte:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Add to LVM"
-msgstr "Engadir LVM"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Add to RAID"
-msgstr "Engadir RAID"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Format"
-msgstr "Formatar"
+msgid "Network printer (TCP/Socket)"
+msgstr "Impresora de rede (TCP/Socket)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "Informaci髇 do correo"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Tentando recuperar a t醔oa de partici髇s de rescate"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira un disquete na unidade\n"
-"Perderanse t骴olos datos no disquete"
+msgid "Backup User files..."
+msgstr "Ficheiro de backup incorrecto"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Warning"
-msgstr "Advertencia"
+msgid "Install system"
+msgstr "Instalar sistema"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Select file"
-msgstr "Seleccione un ficheiro"
+msgid "First DNS Server (optional)"
+msgstr "Primeiro Servidor DNS (opcional)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-"A t醔oa de partici髇s de rescate non ten\n"
-"o mesmo tama駉. 緾ontinuar de calquera xeito?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Automonta-las unidades extra韇les"
+msgid "dhcpd Config..."
+msgstr "Configurando..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "T醔oa de partici髇s de rescate"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
+"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
+"Actualmente est desactivada.\n"
+"\n"
+"縌ue desexa facer?"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Rescue partition table"
-msgstr "T醔oa de partici髇s de rescate"
+msgid "LILO/grub Installation"
+msgstr "Instalaci髇 do LILO/grub"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr "Israel"
+
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "T醔oa de partici髇s de rescate"
+msgid "load setting"
+msgstr "Formatando"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Escribir t醔oa de partici髇s"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Desactivando a rede"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "Floppy can be removed now"
msgstr ""
-"Para ter m醝s partici髇s, borre unha para poder crear unha partici髇 "
-"estendida"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Non posible engadir m醝s partici髇s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All primary partitions are used"
-msgstr "T骴alas partici髇s primarias est醤 usadas"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Informaci髇 do correo"
+msgid "Truly minimal install"
+msgstr "Desinstalar"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Auto allocate"
-msgstr "Asignaci髇 autom醫ica"
+msgid "Denmark"
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Clear all"
-msgstr "Borrar todas"
+msgid "Moving partition..."
+msgstr "Desprazando partici髇..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "緿esexa probar a configuraci髇?"
+msgid "(This) DHCP Server IP"
+msgstr "IP do servidor CUPS"
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "縎a韗 do programa sen gardar a t醔oa de partici髇s?"
+msgid "Test of the configuration"
+msgstr "Proba da configuraci髇"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Sa韗 sen gardar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Instalando o paquete %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Continue anyway?"
-msgstr "緾ontinuar de calquera xeito?"
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "Mudar a modo experto"
+msgid "Choose your filesystem encryption key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "Mudar a modo normal"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Undo"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Andorra"
msgstr "Refacer"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+#: ../../lang.pm:1
+#, c-format
+msgid "Sierra Leone"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Escolla a acci髇"
+msgid "Botswana"
+msgstr "Estonio"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Crear unha nova partici髇"
+msgid "(default value: %s)"
+msgstr " (Por omisi髇)"
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "Mudar o tipo de partici髇"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (Letter)"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "Servidor DNS"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
-msgid "Domain"
-msgstr "Dominio NIS"
+msgid "Choose an X server"
+msgstr "Escolla un servidor X"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username"
-msgstr "Nome de usuario"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "Tama駉 da partici髇 de intercambio en MB: "
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Autenticaci髇"
+msgid "No changes to backup!"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Formatted\n"
+msgstr "Formatado\n"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Another one"
-msgstr "Internet"
+msgid "Type of install"
+msgstr "Elixa o paquete a instalar"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Which username"
-msgstr "Nome de usuario"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Impresora SMB/Windows 95/98/NT"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "cpu # "
+msgid "%d comma separated numbers"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "SMBus controllers"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
+"O protocolo rusers permite 髎 usuarios dunha rede identificar quen\n"
+"est conectado noutras m醧uinas activas."
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "USB controllers"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Configuraci髇 do estilo de arrinque"
-#: ../../harddrake/data.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "SCSI controllers"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Firewire controllers"
+msgid "Barbados"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to backup..."
+msgstr "Escolla a lingua que desexe usar."
+
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Joystick"
+msgid "received"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Seleccione unha tarxeta gr醘ica"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_New"
+msgstr "/Ficheiro/_Novo"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Xen閞ico"
+msgid "The DNS Server IP"
+msgstr "IP do servidor CUPS"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bridges and system controllers"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Rato"
+#: ../../security/level.pm:1
+#, c-format
+msgid "High"
+msgstr "Alto"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Tarxeta Ethernet"
+#: ../../any.pm:1
+#, c-format
+msgid "NoVideo"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Processors"
+msgid "this field describes the device"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Webcam"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Tarxeta de son"
+msgid "Local Printers"
+msgstr "Impresora local"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Outros"
+msgid "Installation image directory"
+msgstr "Configuraci髇 da LAN"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "Tarxeta de TV"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Server"
+msgstr "Servidor NIS"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Modo de v韉eo"
+msgid "Port: %s"
+msgstr "Porto"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Tape"
-msgstr "Tipo"
+msgid "Spain"
+msgstr "Espa駉l"
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Este nome de usuario xa est engadido"
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "CD/DVD burners"
-msgstr ""
+#: ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a file"
+msgstr "Escolla a acci髇"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "CDROM"
+msgid "Apply"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Disk"
-msgstr "Dinamarqu閟"
+msgid "Auto-detect available ports"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Zip"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Floppy"
-msgstr "Gardar nun disquete"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "A compartici髇 da conexi髇 Internet est desactivada"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Let me pick any driver"
+msgid "San Marino"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "Controlador"
+msgid "Belgium"
+msgstr "Belga"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kuwait"
+msgstr "Sa韗"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "Escolla o xestor de fiestras para executar:"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Sound trouble shooting"
+msgid "First Time Wizard"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"Ocorreu un erro, e o programa non sabe como manexalo de\n"
+"maneira limpa. Contin鷈 seu propio risco."
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Unkown driver"
+msgid "please wait, parsing file: %s"
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Localizaci髇"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
+msgid "Pakistan"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No open source driver"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Versi髇: %s\n"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor, agarde... Aplicando a configuraci髇"
+msgid "Provider name (ex provider.net)"
+msgstr "Nome do provedor (p.ex provider.net)"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
+msgid "Version: %s\n"
+msgstr "Versi髇: %s\n"
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Trouble shooting"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"O seu sistema ten poucos recursos. Pode que te馻 alg鷑 problema\n"
+"instalando Mandrake Linux. Se iso acontece, pode tentar unha instalaci髇\n"
+"en modo texto. Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
+"'text'."
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "Usar a partici髇 de Windows para loopback"
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
+msgid "Armenian (typewriter)"
+msgstr "Armenio (m醧uina de escribir)"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+msgid "Connection type: "
+msgstr "Tipo de conexi髇: "
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Configuraci髇 da LAN"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
+msgid "Graphical interface"
+msgstr "Lanzar X11 arrincar"
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "No alternative driver"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s con aceleraci髇 3D por hardware"
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "enable radio support"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "India"
+msgstr "Iraniano"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Radio support:"
+msgid "Chad"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Formatando"
+msgid "Slovakia"
+msgstr "Esloveno"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "Singapore"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Number of capture buffers:"
+msgid "Cambodia"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Mudar o tipo de partici髇"
-
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Memoria da tarxeta (DMA)"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor HorizSync: %s\n"
+msgstr "Frecuencia horizontal do monitor: %s\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "Path"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Xen閞ico"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Usar detecci髇 autom醫ica"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "緿esexa probar a configuraci髇?"
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Do"
-msgstr "Feito"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "緼 s鷄 escolla? (por omisi髇 %s)"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Elecci髇 incorrecta, tente de novo\n"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Add host"
+msgstr "Engadir usuario"
-#: ../../interactive/stdio.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "緼 s鷄 escolla? (por omisi髇 %s)"
-
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid " enter `void' for void entry"
+msgid "China (broadcast)"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "緿esexa usar aboot?"
+msgid "Use quota for backup files."
+msgstr "Ficheiro de backup incorrecto"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opci髇s: %s"
+msgid "Configuring printer \"%s\"..."
+msgstr "Configurar impresora"
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "緼 s鷄 escolla? (por omisi髇 %s)"
-
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Internet connection"
+msgstr "Compartici髇 da conexi髇 Internet"
#: ../../modules/interactive.pm:1
#, c-format
@@ -8104,2071 +8034,1963 @@ msgstr ""
"Fallo o cargar o m骴ulo %s\n"
"緿esexa retentalo con outros par醡etros?"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "Especificar as opci髇s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Autoprobe"
-msgstr "Autodetecci髇"
-
-#: ../../modules/interactive.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+msgid "Welcome to the Open Source world."
msgstr ""
-"Nalg鷑s casos, o controlador de %s necesita informaci髇 extra\n"
-"para funcionar correctamente, a韓da que normalmente funcione sen ela.\n"
-"緿esexa especificar informaci髇 extra para o controlador ou deixar que el\n"
-"analice o seu equipo e atope a informaci髇 que necesita? 羢 veces,\n"
-"analizar o equipo pode provocar que se pare, pero non deber韆\n"
-"causar ning鷑 dano."
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "縌ue controlador de %s desexa probar?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Opci髇s do m骴ulo:"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Bosnia and Herzegovina"
msgstr ""
-"Aqu deben ir as diferentes opci髇s para o m骴ulo %s.\n"
-"As opci髇s son da forma 玭ome=valor nome2=valor2 ....\n"
-"Por exemplo pode ter 玦o=0x300 irq=7"
-#: ../../modules/interactive.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
+"Necesita un sistema de ficheiros real (ext2, reiserfs) para este punto de "
+"montaxe\n"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(m骴ulo %s)"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando o controlador para a tarxeta %s %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Mire a informaci髇 sobre o hardware"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Probe o seu rato"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "縏en algunha interface %s?"
+msgid "Netherlands"
+msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "縏en algunha outra?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Gardar nun ficheiro"
-#: ../../modules/interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s atopadas"
+msgid "Internal ISDN card"
+msgstr "Tarxeta RDSI interna"
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Formatar partici髇s"
+msgid "Title"
+msgstr "T醔oa"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "comma separated numbers"
+msgid "Install & convert Fonts"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "%d comma separated strings"
+msgid "WARNING"
msgstr ""
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Installing bootloader"
+msgstr "Cargador de arrinque"
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "a number"
-msgstr "N鷐ero de tel閒ono"
+msgid "replay"
+msgstr "Reproducir"
-#: ../../network/adsl.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
+msgid "detected %s"
+msgstr "detectouse %s"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+msgid "Virgin Islands (U.S.)"
msgstr ""
-"O xeito m醝s habitual de conectar con adsl con pppoe.\n"
-"Algunhas conexi髇s usan pptp, e algunhas usan dhcp.\n"
-"Se non o sabe con certeza, escolla 'usar pppoe'"
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "Conectar Internet"
+msgid "Bad backup file"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
+"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
+"Actualmente est desactivada.\n"
+"\n"
+"縌ue desexa facer?"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "usar dhcp"
+msgid "Pipe into command"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "usar pptp"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"Alg鷑 hardware do seu ordenador necesita controladores ``propietarios''\n"
+"para funcionar. Pode atopar m醝s informaci髇 sobre eles en: %s"
-#: ../../network/adsl.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Probar portos"
+msgid "Detecting devices..."
+msgstr "Detectando os dispositivos..."
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Everything (no firewall)"
+msgid "Click here to launch the wizard ->"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "Haiti"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Description of the fields:\n"
+"\n"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "the name of the CPU"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
+
+#: ../../install2.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+msgid "You must also format %s"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "Te馻 coidado: esta operaci髇 perigosa."
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "No network card"
-msgstr "non se atopou ningunha tarxeta de rede"
+msgid "Insert a floppy containing package selection"
+msgstr "Insira un disquete na unidade %s"
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "POP and IMAP Server"
+msgid "Server: "
msgstr "Servidor"
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Bases de datos"
-
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Nome de dominio"
+msgid "Security Alerts:"
+msgstr "Establecendo o nivel de seguridade"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Servidor"
+msgid "Sweden"
+msgstr "Mirar"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Use Expect for SSH"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Poland"
+msgstr "Island閟"
+
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Host name"
-msgstr "Nome de m醧uina"
+msgid "Importance: %s\n"
+msgstr "Importancia: %s\n"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Nome de m醧uina"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Escolla os paquetes que desexa instalar."
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Probar portos"
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "Configurando a rede"
+msgid "SMBus controllers"
+msgstr ""
-#: ../../network/ethernet.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "Tipo de conexi髇: "
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Escolla o adaptador de rede que desexa usar para conectar Internet"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose the network interface"
-msgstr "Escolla a interface de rede"
+msgid "Croatian"
+msgstr "Croata"
-#: ../../network/ethernet.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Usar partici髇 existente"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "Unable to contact mirror %s"
msgstr ""
-"Non se detectou ning鷑 adaptador de rede ethernet no seu sistema.\n"
-"Non se pode configurar este tipo de conexi髇."
-#: ../../network/ethernet.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"縌ue cliente dhcp desexa usar?\n"
-"Por omisi髇 o dhcp-client"
+msgid "/Help/_About..."
+msgstr "/Axuda/_Acerca..."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
+msgid "Remove user directories before restore."
msgstr ""
-"Non se atopou ningunha tarxeta RDSI PCI. Seleccione unha na pr髕ima pantalla."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-"Detectouse unha Tarxeta RDSI PCI, pero se desco馿ce o tipo. Seleccione unha "
-"tarxeta PCI na seguinte pantalla."
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "緾al a sua tarxeta RDSI?"
+msgid "CUPS printer configuration"
+msgstr "Configuraci髇 de Internet"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "Configuraci髇 da RDSI"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Abort"
-msgstr "Abortar"
+msgid "F00f bug"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid "Continue"
-msgstr "Continuar"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../network/isdn.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
msgstr ""
-"\n"
-"Se ten unha tarxeta ISA, os valores na seguinte pantalla deber韆n ser os "
-"correctos.\n"
-"\n"
-"Se ten unha tarxeta PCMCIA, ten que co馿cer a irq e a e/s da tarxeta.\n"
+"縌ue cliente dhcp desexa usar?\n"
+"Por omisi髇 o dhcp-client"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Non sei"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Nome de dominio"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Gardar nun disquete"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Restore"
+msgstr "Restaurar"
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "縌u tipo de tarxeta ten?"
+msgid "Looking for available packages..."
+msgstr "Buscando os paquetes dispo駃bles"
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "Init Message"
+msgstr "Mensaxe inicial"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "縌u protocolo desexa usar?"
+msgid "Rescue partition table"
+msgstr "T醔oa de partici髇s de rescate"
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
+msgid "Connection complete."
+msgstr "Tipo de conexi髇: "
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cyprus"
msgstr ""
-"Resto do mundo \n"
-" sen canle-D (li馻s dedicadas)"
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Protocolo de arrinque"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Remove from RAID"
+msgstr "Quitar do RAID"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
-"Seleccione o seu provedor.\n"
-" Se non est na lista, escolla 'Unlisted'"
+"Este contrasinal demasiado simple (ten que ter polo menos %d caracteres)"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "M骴em RDSI externo"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "Axudante da configuraci髇 de rede"
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Internal ISDN card"
-msgstr "Tarxeta RDSI interna"
+msgid "ISDN connection"
+msgstr "conexi髇 por RDSI"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "縌ue tipo de conexi髇 RDSI ten?"
+msgid "primary"
+msgstr ""
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Axudante da configuraci髇 de rede"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "etectouse unha configuraci髇 de firewall!"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "etectouse unha configuraci髇 de firewall!"
-
-#: ../../network/isdn.pm:1
-#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"We recommand the light configuration.\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
+"Agora poder escoller que servicios quere que sexan arrincados inicio.\n"
+"Cando o seu rato pasa por riba dun elemento, unha pequena axuda aparecer醆n"
+"describindo o cometido do servicio.\n"
+"\n"
+"Sexa especialmente coidadoso neste paso se pretende utiliza-la s鷄 m醧uina\n"
+"coma un servidor: probablemente non querer iniciar servicios que non "
+"precisa."
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "M醧uina:"
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Skip"
+msgstr "Omitir"
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Instalar"
+msgid "Niue"
+msgstr "bo"
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
+"Activa/desactiva t骴alas interfaces de rede configuradas para\n"
+"seren activadas no arrinque."
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "T醔oa"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Domain name"
-msgstr "Nome de dominio"
+msgid "important"
+msgstr "importante"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CHAP"
+msgid "Total Progress"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Baseado nun script"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Terminal-based"
-msgstr "Baseado nun terminal"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Login ID"
-msgstr "ID do login"
+msgid "Users"
+msgstr "Usuarios"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "N鷐ero de tel閒ono"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Aruba"
+msgstr "Grub"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection name"
-msgstr "Nome da conexi髇"
+msgid "Preparing bootloader..."
+msgstr "Preparando o cargador de arrinque"
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "Opci髇s de chamada"
+msgid "Gateway (e.g. %s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Escolla o porto serie onde est conectado o seu m骴em."
+msgid "The passwords do not match"
+msgstr "Os contrasinais non coinciden"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "Configuraci髇 da rede"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "Frequency (MHz)"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
-"Tras facer iso, acons閘lase reiniciar o sistema X para\n"
-"evitar os problemas de mudar o nome de m醧uina."
+"Para usar esta selecci髇 de paquetes gardada, arrinque a instalaci髇 con "
+"``linux defcfg=floppy''"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+msgid "the number of the processor"
msgstr ""
-"Noraboa. A configuraci髇 da rede e de internet est rematada.\n"
-"\n"
-"Agora vai ser aplicada seu sistema.\n"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "緿esexa reiniciar a rede?"
+msgid "Hardware clock set to GMT"
+msgstr "縊 reloxo interno do seu ordenador usa a hora GMT?"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"縀st seguro de que quere deseleccionalo?"
+msgid "Give a file name"
+msgstr "Nome real"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Configuraci髇 da rede"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Escolla o porto serie onde est conectado o seu m骴em."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "緿esexa que a conexi髇 se inicie arrincar?"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "Compartici髇 da conexi髇 Internet"
+msgid "Change Cd-Rom"
+msgstr "Mude o Cd-Rom"
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "Paraguay"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Elixa a ferramenta que queira usar"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "tarxeta(s) ethernet detectada(s)"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "LAN connection"
-msgstr "Conexi髇 LAN"
+msgid "force"
+msgstr "forzar"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Conexi髇 por cable"
+msgid "Exit"
+msgstr "Ext2"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "Conexi髇 por cable"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "detectouse %s"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Conexi髇 LAN"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "detected %s"
-msgstr "detectouse %s"
+msgid "Estonian"
+msgstr "Estonio"
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "ISDN connection"
-msgstr "conexi髇 por RDSI"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache un servidor de World Wide Web. 趕ase para servir ficheiros HTML\n"
+"e CGI."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Conexi髇 normal por m骴em"
+msgid "Add/Del Clients"
+msgstr "Cliente DHCP"
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "detected on port %s"
-msgstr "detectado no porto %s"
+msgid "Choose the network interface"
+msgstr "Escolla a interface de rede"
-#: ../../network/netconnect.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "Conexi髇 normal por m骴em"
+msgid "Unknown Model"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Detecting devices..."
-msgstr "Detectando os dispositivos..."
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Mode"
-msgstr "Modo experto"
+msgid ""
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Partici髇 de arrinque por omisi髇\n"
+" (para arrincar en MS-DOS, non para lilo)\n"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Use auto detection"
-msgstr "Usar detecci髇 autom醫ica"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Escolla a acci髇"
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "Escolla o perfil para configurar"
+msgid "Firewalling configuration detected!"
+msgstr "etectouse unha configuraci髇 de firewall!"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Conexi髇 Internet\n"
-"\n"
-"Vaise configurar a s鷄 conexi髇 internet/rede.\n"
-"Se non quere usar a detecci髇 autom醫ica, desmarque a caixa.\n"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
+msgstr "Nome da conexi髇"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-"Como est a facer unha instalaci髇 de rede, esta xa est configurada.\n"
-"Prema Aceptar para manter a configuraci髇, ou Cancelar para reconfigurar a "
-"conexi髇 de rede e Internet.\n"
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Updating package selection"
+msgstr "Gardar a selecci髇 de paquetes"
+
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "縊nde desexa montar o ficheiro loopback %s?"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a s鷄 conexi髇."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
+msgid "the number of buttons the mouse has"
+msgstr "2 bot髇s"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a s鷄 conexi髇."
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "Conexi髇 e configuraci髇 de Internet"
+msgid "Replay"
+msgstr "Reproducir"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "Configurar a rede"
+msgid "Backup other files"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Disconnect"
-msgstr "conexi髇 por RDSI"
+#: ../../install_steps.pm:1
+#, c-format
+msgid "No floppy drive available"
+msgstr "Ningunha disqueteira dispo駃ble"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connect"
-msgstr "Conectar"
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
+msgid "TV norm:"
msgstr ""
-"\n"
-"Pode reconfigurar a s鷄 conexi髇."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Cpuid family"
msgstr ""
-"\n"
-"Pode conectar Internet ou reconfigurar a s鷄 conexi髇."
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Non est neste intre conectado Internet."
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a s鷄 conexi髇."
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituano AZERTY (novo)"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Est neste intre conectado internet."
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "O proxy deber韆 ser http://..."
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Seleccionou unha partici髇 RAID software como ra韟 (/).\n"
+"Non hai ning鷑 cargador de arrinque que funcione deste xeito sen unha\n"
+"partici髇 /boot.\n"
+"Lembre polo tanto engadir unha partici髇 /boot"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "O proxy deber韆 ser http://..."
+msgid "Previous"
+msgstr "Anterior"
-#: ../../network/network.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "FTP proxy"
-msgstr "Proxy FTP"
+msgid "Other OS (MacOS...)"
+msgstr "Outros SO (MacOS...)"
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
+msgid "To activate the mouse,"
+msgstr "Para activar o rato,"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "Configuraci髇 dos proxys"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
+msgid "Bringing up the network"
+msgstr "Activando a rede"
-#: ../../network/network.pm:1
+#: ../../common.pm:1
#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela"
+msgid "Screenshots will be available after install in %s"
+msgstr "Pode escoller outras linguas que estar醤 dispo駃bles trala instalaci髇"
-#: ../../network/network.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Tanzania"
msgstr ""
-"Introduza o nome da s鷄 m醧uina.\n"
-"Ese nome debe ser un nome completamente cualificado,\n"
-"como ``mi馻maquina.meulab.mi馻comp.es''.\n"
-"Pode tam閚 introducir o enderezo IP da pasarela se usa unha"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "Computing FAT filesystem bounds"
+msgstr "Calculando os l韒ites do sistema de ficheiros FAT"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"\n"
+"Backup Sources: \n"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
+msgid "Content of the file"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Iniciado o arrincar"
+msgid "Authentication LDAP"
+msgstr "Autenticaci髇"
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Probe o seu rato"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Configuraci髇 da rede"
+msgid "Profile "
+msgstr "Perfil: "
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "transmitted"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Nome de m醧uina"
+msgid "Palestine"
+msgstr "Gardar a selecci髇 de paquetes"
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Netmask"
-msgstr "M醩cara de rede"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "IP address"
-msgstr "Enderezo IP"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "%d comma separated strings"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP autom醫ico"
+msgid "Here is the full list of keyboards available"
+msgstr "Esta a lista completa de teclados dispo駃bles"
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "Nome de recurso compartido"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurar o dispositivo de rede %s"
+msgid "/_Help"
+msgstr "/A_xuda"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-"Introduza o enderezo IP desta m醧uina, por favor.\n"
-"Cada valor ten que ser introducido coma un enderezo IP en\n"
-"notaci髇 decimal con puntos (por exemplo: 1.2.3.4)."
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "the width of the progress bar"
msgstr ""
-"AVISO: Este dispositivo foi configurado previamente para conectar "
-"Internet.\n"
-"Simplemente acepte para manter o dispositivo configurado.\n"
-"Se modifica os campos de embaixo, subsituir esta configuraci髇."
-#: ../../network/shorewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cook Islands"
msgstr ""
-"tenci髇! Detectouse unha configuraci髇 de firewall existente. Pode que "
-"te馻 que facer alg鷑 arranxo manual trala instalaci髇."
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "etectouse unha configuraci髇 de firewall!"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Account Password"
-msgstr "Contrasinal da conta"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fs.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "Login da conta (nome de usuario)"
+msgid "Formatting partition %s"
+msgstr "Formatando a partici髇 %s"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexi髇: "
+msgid "Hostname required"
+msgstr "Nome de m醧uina: "
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Tipo de conexi髇: "
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Dialing mode"
-msgstr "Modo de marcaci髇"
+msgid "Cancel"
+msgstr "Cancelar"
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Escoller teclado"
+msgid "Searching for configured scanners ..."
+msgstr "Impresora local"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 do provedor (opcional)"
+msgid "Wheel"
+msgstr "Roda"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 do provedor (opcional)"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Videocard"
+msgstr "Modo de v韉eo"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Provider phone number"
-msgstr "N鷐ero de tel閒ono do provedor"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (p.ex provider.net)"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "Eliminar fila"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Your personal phone number"
-msgstr "O seu n鷐ero de tel閒ono persoal"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 da tarxeta"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Impresora remota"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_0"
-msgstr "E/S_0 da tarxeta"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"VISO!\n"
+"\n"
+"O DrakX vai agora redimensionar a partici髇 de Windows. Te馻 coidado:\n"
+"esta operaci髇 perigosa. Se a韓da non o fixo, deber韆 executar primeiro\n"
+"o scandisk no Windows (e opcionalmente o defrag), e reiniciar a "
+"instalaci髇.\n"
+"Tam閚 aconsellable facer unha copia de seguridade dos seus datos.\n"
+"Cando estea seguro, prema Aceptar."
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Card IO"
-msgstr "E/S da tarxeta"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memoria da tarxeta (DMA)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Card IRQ"
-msgstr "IRQ da tarxeta"
+msgid "Other"
+msgstr "Outros"
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Please fill or check the field below"
-msgstr "Encha ou marque os campos de embaixo"
+msgid "Default"
+msgstr "Por omisi髇"
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "Configuraci髇 da conexi髇"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "Button 2 Emulation"
msgstr ""
-"Semella que o sistema non est conectado internet.\n"
-"Probe reconfigurando a conexi髇."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid "type1inst building"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "O sistema est conectado Internet."
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Testing your connection..."
-msgstr "Probando a conexi髇..."
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "縌uere probar agora a conexi髇 Internet?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "Configuraci髇 de Internet"
+msgid "Abiword"
+msgstr "Abortar"
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Est a acontecer algo grave coa s鷄 unidade.\n"
-"A proba para verificar a integridade dos datos fallou.\n"
-"Isto significa que calquera escritura no disco producir lixo aleatorio"
+msgid "choose image file"
+msgstr "Escolla a acci髇"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid " (Default)"
-msgstr " (Por omisi髇)"
+msgid "X server"
+msgstr "Servidor X"
-#: ../../printer/cups.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
+msgid "Domain Admin User Name"
+msgstr "Nome de dominio"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Impresora remota"
-
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
-#, c-format
-msgid "CUPS"
-msgstr ""
+msgid "There was an error while scanning for TV channels"
+msgstr "Houbo un erro instalar os paquetes:"
-#: ../../printer/cups.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "US keyboard (international)"
+msgstr "Estadounidense (internacional)"
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(m骴ulo %s)"
+msgid "Not installed"
+msgstr "Sa韗 da instalaci髇"
-#: ../../printer/data.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "LAN connection"
+msgstr "Conexi髇 LAN"
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "LPRng"
-msgstr ""
+msgid "/File/-"
+msgstr "Ficheiro/-"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "Italian"
+msgstr "Italiano"
-#: ../../printer/data.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "LPD"
+msgid "Basic"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "PDQ"
+msgid "Honduras"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
+msgid "pdq"
msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Card IO"
+msgstr "E/S da tarxeta"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Unknown model"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Porto"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Nome de m醧uina"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Interface de rede"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Interface %s"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "non se atopou ningunha tarxeta de rede"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Raw printer (No driver)"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ", using command %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "\t-Network by FTP.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Russian (Yawerty)"
+msgstr "Ruso (Yawerty)"
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "URI do dispositivo de impresi髇"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro escribindo ficheiro %s"
+msgid "/_Quit"
+msgstr "Sa韗"
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ", multi-function device"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Graphics memory: %s kB\n"
+msgstr "Memoria da tarxeta gr醘ica: %s KB\n"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid "access to compilation tools"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Sen impresora"
+msgid "Please select data to restore..."
+msgstr "Escolla a lingua que desexe usar."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"Se ten pensado usar aboot, te馻 coidado de deixar un espacio libre (2048\n"
+"sectores abondan) no inicio do disco"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Standard test page"
+msgstr "Ferramentas est醤dar"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr ""
+msgid "Create"
+msgstr "Crear"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Impresora local"
+msgid "What"
+msgstr "Agarde"
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Pipe job into a command"
-msgstr ""
+msgid "There was an error ordering packages:"
+msgstr "Houbo un erro ordenar os paquetes:"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "URI do dispositivo de impresi髇"
+msgid "Bulgarian (BDS)"
+msgstr "B鷏garo"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Servidor de impresi髇"
+msgid "Disable Server"
+msgstr "Bases de datos"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora SMB/Windows 95/98/NT"
+msgid "Filesystem encryption key"
+msgstr "Tipo de sist. de ficheiros: "
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de rede (TCP/Socket)"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
+msgid "Save theme"
+msgstr "Instalar sistema"
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Remote printer"
-msgstr "Impresora remota"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "Grupo de traballo"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Local printer"
-msgstr "Impresora local"
+msgid "Brazil"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Configurar impresora"
+msgid "Auto Install"
+msgstr "Instalar"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Network Configuration Wizard"
+msgstr "Axudante da configuraci髇 de rede"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
+msgid "Removable media automounting"
+msgstr "Automonta-las unidades extra韇les"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "緿esexa reiniciar a rede?"
+msgid "Printing"
+msgstr "Impresora"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Impresora remota"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Unkown driver"
+msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "緿esexa probar a configuraci髇?"
+#, c-format
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create a new partition"
+msgstr "Crear unha nova partici髇"
+
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Imprimindo p醲ina(s) de proba..."
+msgid "Driver:"
+msgstr "Controlador"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "unknown"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "Usar fdisk"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "OVA A RODA!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Automatic IP"
+msgstr "IP autom醫ico"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#, fuzzy, c-format
+msgid "Configuration of a remote printer"
+msgstr "Configurar a impresora"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
+msgid "Moldova"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Impresora local"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Escolla os paquetes que desexa instalar."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Set this printer as the default"
+msgid "An online platform to respond to enterprise support needs."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer options"
-msgstr "Opci髇s da impresora"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "O proxy deber韆 ser http://..."
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Add a new rule at the end"
+msgstr "Sen impresora"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer manufacturer, model"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
+"Aqu deben ir as diferentes opci髇s para o m骴ulo %s.\n"
+"As opci髇s son da forma 玭ome=valor nome2=valor2 ....\n"
+"Por exemplo pode ter 玦o=0x300 irq=7"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "縎a韗 do programa sen gardar a t醔oa de partici髇s?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Conexi髇 da impresora"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Compartici髇 da conexi髇 Internet"
+msgid "Installing packages..."
+msgstr "Instalando o paquete %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dutch"
+msgstr "Holand閟"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Sen impresora"
+msgid "The following packages need to be installed:\n"
+msgstr "Vanse instalar os seguintes paquetes"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do it!"
+msgid "Angola"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Close"
-msgstr "Rato"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "緿esexa probar a configuraci髇?"
+msgid "service setting"
+msgstr "interesante"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Configuraci髇 de Internet"
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Custom"
+msgstr "Personalizado"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Sen impresora"
+msgid "File is already used by another loopback, choose another one"
+msgstr "O ficheiro xa est a ser usado por outro loopback, escolla outro"
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Normal Mode"
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Configurar a rede"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Configuraci髇 da LAN"
+msgid "Latvia"
+msgstr "Localizaci髇"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "No known driver"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-"Estas son as filas de impresi髇.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Printing system: "
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Configurar impresora"
+msgid "Configure Local Area Network..."
+msgstr "Configurar a rede de 醨ea local..."
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Configurar impresora"
+msgid "Launch the sound system on your machine"
+msgstr "Lanzar o sistema X-Window iniciar"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
msgstr "Lendo a base de datos de controladores de CUPS..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "縌ue sistema de impresi髇 desexa usar?"
+msgid "Information"
+msgstr "Mostrar informaci髇"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Selecci髇 da conexi髇 da impresora"
+msgid "No network card"
+msgstr "non se atopou ningunha tarxeta de rede"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Impresora local"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "縌u sistema de ficheiros desexa?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Instalando o paquete %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 bot髇s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Resoluci髇: %s\n"
+msgid "Detailed information"
+msgstr "Informaci髇 do correo"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "Malta"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "縌ue sistema de impresi髇 desexa usar?"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
"\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "This floppy is not FAT formatted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoico"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "Configurando a rede"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, fuzzy, c-format
-msgid "high"
-msgstr "Alto"
+msgid "Graphic Card"
+msgstr "Tarxeta gr醘ica"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "縌ue sistema de impresi髇 desexa usar?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Calculando os l韒ites do sistema de ficheiros de Windows"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "Configurar a impresora"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider dns 1 (optional)"
+msgstr "Dns 1 do provedor (opcional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Cameroon"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
msgstr ""
+"Pode agora particionar %s.\n"
+"Cando remate, non esqueza gravar usando `w'"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Configurar a rede"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Configurando a rede"
+msgid "Close"
+msgstr "Rato"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "O monitor non est configurado"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Probando a conexi髇..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Configuraci髇 de Internet"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
+"Para utilizar unha fila de impresi髇 remota lpd, necesario\n"
+"que indique o nome do servidor de impresi髇 e o nome da fila\n"
+"nese servidor."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Sen impresora"
+msgid "Iceland"
+msgstr "Island閟"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "stopped"
+msgstr "parado"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "Expandir 醨bore"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+msgid "Expert Mode"
+msgstr "Modo experto"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "Opci髇s da impresora"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "non se atopou ningunha tarxeta de rede"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Ficheiro de backup incorrecto"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "Servidor NIS"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
+" <Tab>/<Alt-Tab> entre elementos | <Space> escoller | <F12> seguinte "
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "Imprimindo p醲ina(s) de proba..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Opci髇s da impresora"
+msgid "Subnet:"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Desactivando a rede"
+msgid "Zimbabwe"
+msgstr "indiferente"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Desactivando a rede"
+msgid "Please enter the host name or IP."
+msgstr "Probe o seu rato"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Desactivando a rede"
+msgid "When"
+msgstr "Roda"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Desactivando a rede"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Segundo Servidor DNS (opcional)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Finland"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "Profundidade de cor: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "Restaurar a partir dun disquete"
+
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "Esloveno"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
msgstr ""
+"Introduza un usuario\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Conexi髇 da impresora"
+
+#: ../../any.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"Estas son as diferentes entradas.\n"
+"Pode engadir algunhas m醝s ou cambiar as que xa existen."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"Executa os comandos programados polo comando at hora indicada cando\n"
+"se executou at, e lanza comandos de lotes cando a carga media baixa\n"
+"dabondo."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+msgid "Installing SANE packages..."
+msgstr "Instalando o paquete %s"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "creaci髇 do disquete de arrinque"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
msgstr ""
-"A(s) p醲ina(s) de proba envi醨onse servidor de impresi髇.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"縁unciona correctamente?"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
+
+#: ../../diskdrake/removable.pm:1
#, fuzzy, c-format
+msgid "Change type"
+msgstr "Mudar o tipo de partici髇"
+
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Instalaci髇 do SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr ""
+
+#: ../../install_messages.pm:1
+#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
"%s\n"
"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
-"A(s) p醲ina(s) de proba envi醨onse servidor de impresi髇.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"Estado da impresi髇:\n"
+"Noraboa, a instalaci髇 rematou.\n"
+"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
+"\n"
+"\n"
+"Para informaci髇 sobre parches dispo駃bles para esta versi髇\n"
+"de Mandrake Linux, consulte o ficheiro de erratas dispo駃bles en\n"
+"\n"
+"\n"
"%s\n"
"\n"
-"縁unciona correctamente?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Imprimindo p醲ina(s) de proba..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Imprimindo p醲ina(s) de proba..."
+"\n"
+"Para informaci髇 sobre a configuraci髇 do seu sistema, despois\n"
+"da instalaci髇, hai un cap韙ulo na Gu韆 do Usuario Oficial\n"
+"de Mandrake Linux."
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo p醲ina(s) de proba..."
+msgid "paranoid"
+msgstr "Paranoico"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Alternative test page (Letter)"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Ferramentas est醤dar"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print"
-msgstr "Impresora"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "Si, imprimir ambas p醲inas de proba"
-
-#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Probar portos"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Resoluci髇"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "緿esexa probar a impresi髇?"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Para imprimir nunha impresora SMB, necesario escribir o\n"
+"nome do servidor SMB (que non sempre o mesmo que o nome de\n"
+"m醧uina TCP/IP) e posiblemente o enderezo IP do servidor de\n"
+"impresoras, ademais necesario o nome do recurso compartido\n"
+"da impresora que quere usar, as como calquera nome de usuario,\n"
+"grupo de traballo ou contrasinal que for necesario."
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Option %s out of range!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "reconfigure"
+msgstr "reconfigurar"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware, pero s con\n"
+"XFree %s, ADVIRTA QUE ESTE SOPORTE EXPERIMENTAL E PODE COLGAR O SISTEMA."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Conexi髇 da impresora"
+msgid "Xinetd Service"
+msgstr "Servidor de impresi髇"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10176,558 +9998,553 @@ msgstr ""
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Configuraci髇 de Internet"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"Erro instalando aboot, \n"
+"縫robar a forzar a instalaci髇 mesmo se iso destr鷈 a primeira partici髇?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Configuraci髇 de Internet"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "Eliminar fila"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"%s exists, delete?\n"
"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "縌u tipo de impresora ten?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Encha ou marque os campos de embaixo"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Conexi髇 da impresora"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "緿esexa probar a configuraci髇?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "Protocolo de arrinque"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Impresora remota"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "Discos LVM %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "可 isto correcto?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "The package %s is needed. Install it?"
msgstr ""
+"Este paquete ten que ser actualizado\n"
+"縀st seguro de que quere deseleccionalo?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Impresora remota"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr " arrincar"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Location"
-msgstr "Localizaci髇"
+msgid "Bus identification"
+msgstr "Autenticaci髇"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Description"
-msgstr "Descrici髇"
+msgid "Please make a backup of your data first"
+msgstr "Faga primeiro unha copia de seguridade dos seus datos"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer"
-msgstr "Nome da impresora"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Localizaci髇"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
+"Ten m醝s dunha unidade de disco duro, 縠n cal delas desexa instalar linux?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Boot ISO"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "羠ea de experto"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Impresora remota"
+
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Morocco"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalando o paquete %s"
+msgid "Which printer model do you have?"
+msgstr "縌u tipo de impresora ten?"
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "Add a new printer"
+msgstr "Sen impresora"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "A command line must be entered!"
+msgid " All of your selected data have been "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Command line"
-msgstr "Nome de dominio"
+msgid "<-- Delete"
+msgstr "Borrar"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "Nepal"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Pipe into command"
+msgid "cpu # "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "detectouse %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "tama駉 do bloque de datos"
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "comandos antes de arrincar, ou 'c' para a li de comandos."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Printer Device URI"
-msgstr "URI do dispositivo de impresi髇"
+msgid "Problems installing package %s"
+msgstr "Problemas instalando o paquete %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "You will receive an alert if the load is higher than this value"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Port"
-msgstr "Porto"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Servidor de impresi髇"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The port number should be an integer!"
-msgstr "O n鷐ero de porto debe ser num閞ico"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Servidor de impresi髇"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-"Para imprimir nunha impresora de socket, ten que fornecer\n"
-"o nome do servidor da impresora, e opcionalmente o n鷐ero do porto."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "Add a scanner manually"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opci髇s da impresora de socket"
+msgid "Reload partition table"
+msgstr "T醔oa de partici髇s de rescate"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Si, quero login autom醫ico con este (usuario, escritorio)"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ", host \"%s\", port %s"
+msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Probando a conexi髇..."
+msgid "Boot"
+msgstr "Ra韟"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Usar detecci髇 autom醫ica"
+msgid "Tuner type:"
+msgstr "Mudar o tipo de partici髇"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "NCP queue name missing!"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NCP server name missing!"
+msgid "\"Menu\" key"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Print Queue Name"
-msgstr "Nome da fila de impresi髇"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Servidor de impresi髇"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Administrator:"
+msgstr "Opci髇s da impresora remota lpd"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir nunha impresora NetWare, necesario escribir o nome\n"
-"do servidor de impresi髇 NetWare (que non sempre o mesmo que\n"
-"o nome de m醧uina TCP/IP), ademais do nome da fila de impresi髇\n"
-"que desexa usar, as como calquera nome de usuario ou contrasinal\n"
-"que for necesario."
+msgid "Please enter your login"
+msgstr "Tente de novo"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opci髇s de impresora NetWare"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Fonts copy"
+msgstr "Formatar disquete"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "Automatizada"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "緿esexa probar a configuraci髇?"
+
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "Gardar a selecci髇 de paquetes"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Formatando o ficheiro loopback %s"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Usar detecci髇 autom醫ica"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Workgroup"
-msgstr "Grupo de traballo"
+msgid "use pptp"
+msgstr "usar pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Share name"
-msgstr "Nome de recurso compartido"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "緿esexa probar a configuraci髇?"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "Servidor de SMB"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "Configurar a rede"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Escoller un espello do que coller os paquetes"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
-"Para imprimir nunha impresora SMB, necesario escribir o\n"
-"nome do servidor SMB (que non sempre o mesmo que o nome de\n"
-"m醧uina TCP/IP) e posiblemente o enderezo IP do servidor de\n"
-"impresoras, ademais necesario o nome do recurso compartido\n"
-"da impresora que quere usar, as como calquera nome de usuario,\n"
-"grupo de traballo ou contrasinal que for necesario."
+"O redimensionador de FAT non capaz de manexar a s鷄 partici髇,\n"
+"ocorreu o seguinte erro: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opci髇s de impresora SMB (Windows 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "緼 que sector desexa desprazala?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Desactivando a rede"
+msgid "Do you want to click on this button?"
+msgstr "緿esexa usar aboot?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Bahamas"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Impresora remota"
+msgid "Manual configuration"
+msgstr "Configuraci髇"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Nome do servidor"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-"Para utilizar unha fila de impresi髇 remota lpd, necesario\n"
-"que indique o nome do servidor de impresi髇 e o nome da fila\n"
-"nese servidor."
+"Este paquete carga o mapa de teclado seleccionado en /etc/sysconfig/"
+"keyboard.\n"
+"Este pode escollerse usando a utilidade kbdconfig. Deber韆 deixar isto\n"
+"activado para a maior韆 dos sistemas."
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opci髇s da impresora remota lpd"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Configuraci髇"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "URI do dispositivo de impresi髇"
+msgid "Xpmac (installation display driver)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Escolla o porto serie onde est conectado o seu m骴em."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
+"O syslog o m閠odo que usan moitos daemons para rexistrar mensaxes\n"
+"nos diversos ficheiros de rexistro do sistema. unha boa idea executar\n"
+"sempre o syslog."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Escolla o porto serie onde est conectado o seu m骴em."
+msgid "Unknown/Others"
+msgstr "Xen閞ico"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Opci髇s"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Vanse eliminar os seguintes paquetes"
+msgid "Auto-detected"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Est a piques de configurar o seu ordenador para que comparta a conexi髇 "
+"Internet.\n"
+"\n"
+"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
+"醨ea local (LAN)."
+
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -10737,944 +10554,867 @@ msgid ""
"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "Rexeitar"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Impresora local"
+msgid "Remote Printers"
+msgstr "Impresora remota"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Impresora local"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "Creando e formatando o ficheiro %s"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "URI do dispositivo de impresi髇"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Impresora local"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Escolla un dos LVM para engadirlle"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Sen impresora"
+msgid "xfs restart"
+msgstr "restrinxir"
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Servidor de impresi髇"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impresora SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "ningunha partici髇 dispo駃ble"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Impresora de rede (TCP/Socket)"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectouse %s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impresora SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "Nome de dominio"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "detectado no porto %s"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Benvido a %s"
+
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Impresora remota"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Insira un disquete baleiro na unidade %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
msgstr ""
#: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
msgid ""
+"The following printer\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Impresora"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"Nalg鷑s casos, o controlador de %s necesita informaci髇 extra\n"
+"para funcionar correctamente, a韓da que normalmente funcione sen ela.\n"
+"緿esexa especificar informaci髇 extra para o controlador ou deixar que el\n"
+"analice o seu equipo e atope a informaci髇 que necesita? 羢 veces,\n"
+"analizar o equipo pode provocar que se pare, pero non deber韆\n"
+"causar ning鷑 dano."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "("
+msgid "Cuba"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Configurar impresora"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "Impresora local"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Redimensionar"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "緿esexa que a conexi髇 se inicie arrincar?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "緿esexa probar a impresi髇?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"A s鷄 tarxeta pode ter soporte de aceleraci髇 3D por hardware, pero s con\n"
+"XFree %s. A tarxeta est soportada por XFree %s, que pode ter un mellor\n"
+"soporte en 2D."
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Escolla o porto serie onde est conectado o seu m骴em."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "O axudante de particionamento do DrakX atopou as seguintes soluci髇s:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "H鷑garo"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"Seleccione o seu provedor.\n"
+" Se non est na lista, escolla 'Unlisted'"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "LDAP Server"
+msgstr "Servidor"
+
+#: ../../services.pm:1
+#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"O soporte PCMCIA normalmente para cousas como ethernet e m骴ems en\n"
+"port醫iles. Non ser arrincado ata que non estea configurado de xeito\n"
+"que non haxa problemas telo instalado en m醧uinas que non o precisan."
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
+msgid "Choose your country"
+msgstr "Escoller teclado"
+
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following printers\n"
"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Sen impresora"
+"- System Files:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Sen impresora"
+msgid "Standalone Tools"
+msgstr "Ferramentas de consola"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "縌ue sistema de impresi髇 desexa usar?"
+msgid "Where"
+msgstr "Roda"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "restrinxir"
+msgid "but not matching"
+msgstr "M醧uina:"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "可 isto correcto?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Servidor de impresi髇"
+msgid "Configuring PCMCIA cards..."
+msgstr "Configurando tarxetas PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "falla o kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Eliminar fila"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "detectouse %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Engadir usuario"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "A instalaci髇 do xestor de arrinque fallou. Ocorreu o seguinte erro:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "partici髇 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoico"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "Usar NIS"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
msgstr "Impresora local"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Eliminar fila"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Borrar o disco completo"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Por omisi髇)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
msgstr "Configuraci髇 do estilo de arrinque"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Configurar a rede"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Feito"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP do servidor CUPS"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Impresora remota"
+msgid "permissions"
+msgstr "partici髇 %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Configuraci髇"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Anterior"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Impresora"
+msgid "Internet Connection Sharing configuration"
+msgstr "Conexi髇 e configuraci髇 de Internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Mudar entre lista completa e ordenada por grupos"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "Themes"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opci髇s: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
msgstr "Configuraci髇 de Internet"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
+msgid "Security Level"
+msgstr "Establecendo o nivel de seguridade"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
msgstr ""
-"Cun servidor CUPS remoto, non ter que configurar aqu韁n"
-"ningunha impresora, xa que ser醤 detectadas automaticamente.\n"
-"No caso de d鷅ida, seleccione \"Servidor CUPS remoto\"."
+"Algunhas das etapas non foron completadas.\n"
+"\n"
+"緿esexa realmente sa韗 agora?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "緾omo est conectada a impresora?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Select Printer Connection"
-msgstr "Selecci髇 da conexi髇 da impresora"
+msgid "Polish (qwertz layout)"
+msgstr "Polaco (disposici髇 qwertz)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
msgstr ""
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"Set the shell timeout. A value of zero means no timeout."
msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Benvido ao %s, o selector de sistema operativo!\n"
+"\n"
+"Escolla un sistema operativo na lista de enriba, ou\n"
+"agarde %d segundos para que se arrinque o sistema por defecto.\n"
"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugu閟"
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Nome do ficheiro loopback: "
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "serie"
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "Newzealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Este directorio deber韆 permanecer dentro do sistema de ficheiros ra韟"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "CapsLock key"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Cargador de arrinque"
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Seleccione a cantidade de memoria da tarxeta gr醘ica"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "縉ome do LVM?"
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "%s interfaces %s atopadas"
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid "sticky-bit"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Instalar"
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Sen impresora"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ da tarxeta"
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
-"Set the root umask."
+"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "logdrake"
+msgstr "draknet"
+
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Escolla a disqueteira que quere usar para crear o disco de arranque"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO con men de texto"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "You must specify a kernel image"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Feito"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Contactando co espello para obter a lista dos paquetes dispo駃bles"
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituano AZERTY (antigo)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasileiro (ABNT-2)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "Instalaci髇 do SILO"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Open"
+msgstr "/Ficheiro/_Abrir"
+
#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Creando un disquete de auto-instalaci髇"
+
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "H鷑garo"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Probar portos"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Configuraci髇"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Escolla o seu tipo de rato."
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Sen impresora"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
+msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
+"Non se atopou ningunha tarxeta RDSI PCI. Seleccione unha na pr髕ima pantalla."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "GB"
+msgstr "GB"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Indique o nome de usuario"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "縋ermitir o arrinque de CD?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Conexi髇 normal por m骴em"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11682,737 +11422,540 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
+"Non hai espacio de intercambio dabondo para finalizar a instalaci髇,\n"
+"por favor, engada alg鷑"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Escolla as opci髇s para o servidor"
-
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Security level"
-msgstr "Establecendo o nivel de seguridade"
+msgid "%s on %s"
+msgstr "Porto"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Escola o nivel de seguridade"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opci髇s"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "緾al a s鷄 zona horaria?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"T髆anse caracter韘ticas do nivel 4, pero agora o sistema est completamente\n"
-"pechado. As caracter韘ticas de seguridade est醤 m醲imo nivel."
+msgid "Guinea"
+msgstr "Xeral"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Con este nivel de seguridade, posible usar este sistema coma servidor.\n"
-"A seguridade agora alta dabondo para usar o sistema coma un servidor\n"
-"que acepta conexi髇s de m鷏tiples clientes."
+msgid "The system is now connected to the Internet."
+msgstr "O sistema est conectado Internet."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
msgstr ""
-"Esta a seguridade recomendada para un ordenador usado para conectar\n"
-" Internet como cliente. Agora hai m醩 comprobaci髇s de seguridade."
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
msgstr ""
-"Os contrasinais est醤 activados, pero o uso como ordenador de rede a韓da\n"
-"non se recomenda."
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
msgstr ""
-"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa m醝s\n"
-"sinxelo de utilizar, pero moi sensible: non debe usarse nunha m醧uina\n"
-"conectada a outras ou Internet. Non hai contrasinais de acceso."
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Paranoid"
-msgstr "Paranoico"
+msgid "Icon"
+msgstr "Icona"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Higher"
-msgstr "Alto"
+msgid "Please choose what you want to backup"
+msgstr "Escolla os paquetes que desexa instalar."
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "High"
-msgstr "Alto"
+msgid "256 colors (8 bits)"
+msgstr "256 cores (8 bits)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Poor"
-msgstr "Pobre"
+msgid "Read-write"
+msgstr "Lectura-escritura"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr "Benvida 髎 crackers"
+msgid "Size: %s\n"
+msgstr "Tama駉: %s\n"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Entre de novo en %s para activar os cambios"
+msgid "Hostname: "
+msgstr "Nome de m醧uina: "
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Saia da sesi髇 e use Ctrl-Alt-BackSpace"
+msgid "Chunk size %s\n"
+msgstr "Tama駉 do bloque de datos %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Impresora local"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Ningunha disqueteira dispo駃ble"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "Conexi髇 LAN"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Insira un disquete na unidade %s"
+msgid "Error!"
+msgstr "Erro"
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Write Config"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "cable connection detected"
+msgstr "Conexi髇 por cable"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Configuraci髇 da LAN"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_Comunicar erro"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "Servidor NIS"
+msgid "Resize"
+msgstr "Redimensionar"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Nome de dominio"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Dominica"
+msgstr "Dominio NIS"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
+msgid "Please enter the device name to use for backup"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Routers:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Resoluci髇: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "M醩cara de rede"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "matching"
+msgstr "M醧uina:"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Configurando..."
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Seleccione o porto correcto. Por exemplo, o porto\n"
+"COM1 en MS Windows ch醡ase ttyS0 en GNU/Linux."
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Cliente DHCP"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Vanse eliminar os seguintes paquetes"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "Cliente DHCP"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Conectar Internet"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Usar partici髇 existente"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "Cliente DHCP"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Canadiano (Qu閎ec)"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "Cliente DHCP"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Dispositivo do rato: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "No net boot images created!"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tipo: "
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Engadir usuario"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Seleccione un ficheiro"
+msgid "We are now going to configure the %s connection."
+msgstr ""
+"\n"
+"Pode desconectar ou reconfigurar a s鷄 conexi髇."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Borrar"
+msgid "MandrakeExpert Corporate"
+msgstr "Experto"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Non conectado"
+msgid "You've not selected any font"
+msgstr "Eliminar fila"
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "Escoller a lingua"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "No kernel selected!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer model selection"
+msgstr "Conexi髇 da impresora"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
+" mudar o tipo da partici髇 %s, perderanse t骴olos datos desta partici髇"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d segundos"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Insira un disquete baleiro na unidade %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
-"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
-"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
-"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
-"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
-"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
-"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "Cliente DHCP"
+msgid "Sound configuration"
+msgstr "Configuraci髇 da LAN"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Engadir usuario"
+msgid "Photo test page"
+msgstr "Imprimindo p醲ina(s) de proba..."
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Particionamento de disco personalizado"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "Servidor NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "Servidor NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Bases de datos"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Bases de datos"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Configuraci髇 de Internet"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Formatando o ficheiro loopback %s"
+msgid "type: %s"
+msgstr "Tipo: "
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Engadir usuario"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Eslovaco (QWERTY)"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
+msgid "No Sound Card detected!"
+msgstr "Non conectado"
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Congratulations!"
-msgstr "oraboa!"
+msgid "Mouse Port"
+msgstr "Porto do rato"
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Creando un disquete de auto-instalaci髇"
+msgid "Ftp Server"
+msgstr "Servidor NIS"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
-msgid "manual"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Configuraci髇 do estilo de arrinque"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Escolla o porto serie onde est conectado o seu rato."
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "replay"
-msgstr "Reproducir"
+msgid "Uganda"
+msgstr "Actualizaci髇"
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Configuraci髇 trala instalaci髇"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
+msgid "Comoros"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
+"\n"
+"Pode desconectar ou reconfigurar a s鷄 conexi髇."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Yaboot mode"
+msgstr "Modo de arrinque"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr ""
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Rato de 3 bot髇s xen閞ico"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Escolla o seu tipo de rato."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Nome de recurso compartido"
+
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"restore description:\n"
+"Restore Description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
@@ -12424,4586 +11967,5081 @@ msgid ""
"\n"
" - Incremental Backups:\n"
"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
+msgid "Re-submit"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Interface de rede"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituano \"fon閠ico\" QWERTY"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Restore"
-msgstr "Restaurar"
+msgid "Net Boot Images"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Sistemas de ficheiros"
+msgid "Sharing of local scanners"
+msgstr "Impresora local"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Configuraci髇 da LAN"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Configuraci髇 da LAN"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "Servicios e daemons"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Configuraci髇 da rede"
+msgid "Remote host name missing!"
+msgstr "Nome do servidor"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Configuraci髇 da rede"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "with /usr"
+msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Configuraci髇 da rede"
+msgid "Network"
+msgstr "Interface de rede"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Total Progress"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Gardar nun ficheiro"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Este contrasinal demasiado simple"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Eslovaco (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "files sending by FTP"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Ficheiro de backup incorrecto"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Ficheiro de backup incorrecto"
+#, c-format
+msgid ""
+" Transfer \n"
+"Now"
+msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Ficheiro de backup incorrecto"
+msgid "Use daemon"
+msgstr "Nome de usuario"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "Autenticaci髇"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP do servidor CUPS"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Escolla a lingua que desexe usar."
+msgid "Where do you want to mount %s?"
+msgstr "縊nde desexa montar o dispositivo %s?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Escolla a lingua que desexe usar."
+msgid "Restore Via Network"
+msgstr "Restaurar a partir dun ficheiro"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Escolla a lingua que desexe usar."
+msgid "Algeria"
+msgstr "serie"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Vanse instalar os seguintes paquetes"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Texto"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Previous"
-msgstr "Anterior"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Save"
-msgstr "Estado:"
+msgid "Setting Default Printer..."
+msgstr "Impresora local"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Ficheiro de backup incorrecto"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Interface %s (usando o m骴ulo %s)"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Restaurar a partir dun ficheiro"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Nome: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "T醔oa de partici髇s de rescate"
+msgid "Generating preview ..."
+msgstr "Detectando os dispositivos..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "serie"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Personalizado"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Xeorxiano (\"latino\")"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Nome de m醧uina: "
+msgid "Kenya"
+msgstr "Teclado"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Use ``Desmontar'' primeiro"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Username required"
-msgstr "Nome de usuario"
+msgid "Installing mtools packages..."
+msgstr "Instalando o paquete %s"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Password required"
-msgstr "Contrasinal"
+msgid "You must specify a root partition"
+msgstr "Debe ter unha partici髇 de intercambio"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "creaci髇 do disquete de arrinque"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Nome de m醧uina"
+msgid "Select a scanner model"
+msgstr "Seleccione unha tarxeta gr醘ica"
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
msgstr ""
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Restaurar a partir dun ficheiro"
+msgid "Drakbackup Configuration"
+msgstr "Configuraci髇 da rede"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Gardar como..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "T醔oa de partici髇s de rescate"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Login autom醫ico"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Restaurar a partir dun disquete"
+msgid "System configuration"
+msgstr "Configuraci髇"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Restaurar a partir dun ficheiro"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Eliminar fila"
+msgid "Configuring printer ..."
+msgstr "Configurar impresora"
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Escolla o seu tipo de rato."
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Restaurar a partir dun ficheiro"
+msgid "Bermuda"
+msgstr "Alem醤"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Restaurar a partir dun ficheiro"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Instalar sistema"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Outros"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Escolla o seu tipo de rato."
+msgid "Remove"
+msgstr "Impresora remota"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "Lesotho"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaurar a partir dun disquete"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Ficheiro de backup incorrecto"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Probe o seu rato"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "Si"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Ficheiro de backup incorrecto"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "縌u protocolo desexa usar?"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Escolla o seu tipo de rato."
+msgid "Restore Progress"
+msgstr "Restaurar a partir dun ficheiro"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Ficheiro de backup incorrecto"
+msgid "Estonia"
+msgstr "Estonio"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "OK to restore the other files."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"Ten un burato na t醔oa de partici髇s, pero non se pode usar.\n"
+"A 鷑ica soluci髇 desprazar as partici髇s primarias para que\n"
+"o burato est despois das partici髇s estendidas"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "Configuraci髇 da rede"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "Channel"
+msgstr "Cancelar"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid " All of your selected data have been "
-msgstr ""
+msgid "Add"
+msgstr "Engadir"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "A compartici髇 da conexi髇 Internet est activada"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Escolla o porto serie onde est conectado o seu m骴em."
+msgid " Error while sending mail. \n"
+msgstr "Erro lendo o ficheiro %s"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Teclado"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the connection you want to configure"
+msgstr "Elixa a ferramenta que queira usar"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Establecendo o nivel de seguridade"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "\t-Network by SSH.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Configurar o dispositivo de rede %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Activar"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Escolla o adaptador de rede que desexa usar para conectar Internet"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Atopando os paquetes para actualizar"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Punto de montaxe: "
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "With X"
+msgstr "Agarde"
+
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Multi-head configuration"
+msgstr "lendo a configuraci髇"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "Pode escoller outras linguas que estar醤 dispo駃bles trala instalaci髇"
+
+#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
"\n"
-"- Daemon (%s) include:\n"
+"%s"
msgstr ""
+"縈anter os cambios?\n"
+"A configuraci髇 actual :\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Non pode usar ReiserFS para partici髇s m醝s pequenas que 32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
+"O protocolo rwho permite que os usuarios remotos obte馻n unha lista de\n"
+"t骴olos usuarios conectados a unha m醧uina que est a executar o daemon\n"
+"rwho (similar finger)."
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Nome de dominio"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opci髇s"
+msgid "Sharing of local printers"
+msgstr "Impresora local"
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Impresora local"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Baleiro"
+
+#: ../../help.pm:1
#, c-format
msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
-"- Save via %s on host: %s\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\t\tErase=%s"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "縊nde desexa montar o dispositivo %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid " (multi-session)"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Dispositivo do rato: %s\n"
+msgid "Interface \"%s\""
+msgstr "Interface %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "RW"
+msgid "With basic documentation (recommended!)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 bot髇"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
-"- Burn to CD"
+"There are %d unknown printers directly connected to your system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- Save on Hard drive on path: %s\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr "Ficheiros:\n"
+msgid "Korea"
+msgstr "M醝s"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr "Ficheiros:\n"
+msgid "Your choice? (default `%s'%s) "
+msgstr "緼 s鷄 escolla? (por omisi髇 %s)"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Sen impresora"
+
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Refacer"
+
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Interface %s"
+msgstr "Interface %s"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Configurar o rato"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup Users"
+msgid "Choose the mount points"
+msgstr "Seleccione os puntos de montaxe"
+
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "Aceptar"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Yugoslavian (latin)"
+msgstr "Iugoslavo (lat韓/cir韑ico)"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Instalando"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Backup system"
-msgstr "Sistemas de ficheiros"
+msgid "Is this an install or an upgrade?"
+msgstr "可 isto unha instalaci髇 ou unha actualizaci髇?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
+msgid "ISDN card"
+msgstr "Tarxeta RDSI interna"
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "on Tape Device"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "on CDROM"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
msgstr ""
+"Noraboa. A configuraci髇 da rede e de internet est rematada.\n"
+"\n"
+"Agora vai ser aplicada seu sistema.\n"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "across Network"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "on Hard Drive"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
+msgid "Printer on remote CUPS server"
+msgstr "Servidor CUPS remoto"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Opci髇s do m骴ulo:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "When"
-msgstr "Roda"
+msgid "delete"
+msgstr "Borrar"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Where"
-msgstr "Roda"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "What"
-msgstr "Agarde"
+msgid "DHCP host name"
+msgstr "Nome de m醧uina"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Escolla o porto serie onde est conectado o seu rato."
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+msgid "Did it work properly?"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Nome de usuario"
+#: ../../security/level.pm:1
+#, c-format
+msgid "Poor"
+msgstr "Pobre"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "monthly"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "weekly"
+msgid "Grenada"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Unsafe"
+msgstr "Inseguro"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "hourly"
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s sectores"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "HardDrive / NFS"
+msgid "No"
+msgstr "Non"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "CDROM / DVDROM"
+msgid "Guadeloupe"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Probe o seu rato"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Escolla os paquetes que desexa instalar."
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "縌uere que a tecla de Borrar devolva Suprimir na consola?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Escolla os paquetes que desexa instalar."
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "Frecuencia de actualizaci髇 vertical"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Escolla os paquetes que desexa instalar."
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Entrando na etapa '%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Ficheiro de backup incorrecto"
+msgid "Removing %s ..."
+msgstr "Resoluci髇: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Seleccione un ficheiro"
+msgid "Niger"
+msgstr "Alto"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
+msgid "No printer"
+msgstr "Sen impresora"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Prema nunha partici髇"
+msgid "alert configuration"
+msgstr "Configuraci髇"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Prema nunha partici髇"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "Opci髇s de impresora NetWare"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid " Erase Now "
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Prema nunha partici髇"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "General"
+msgstr "Xeral"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Prema nunha partici髇"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Prema nunha partici髇"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Engadir usuario"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Escolla a disposici髇 do seu teclado."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "Configuraci髇 de rede (%d adaptadores)"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "Aceptar"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Sen contrasinal"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Nome da fila de impresi髇"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Tente de novo"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "緿esexa usar aboot?"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Tente de novo"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Bielorruso"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Probe o seu rato"
+msgid "Move files to the new partition"
+msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "T醔oa de partici髇s de rescate"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "Impresora"
+
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Grupo de traballo"
+
+#: ../../fs.pm:1
#, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Users"
-msgstr "Usuarios"
+msgid "LILO with graphical menu"
+msgstr "LILO con men gr醘ico"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
+msgid "Estimating"
+msgstr "Estimando"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Non pode deseleccionar este paquete. Xa est instalado"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Eliminar fila"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Impresora SMB/Windows 95/98/NT"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "縎eguir adiante?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Escolla os paquetes que desexa instalar."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Buscando os paquetes dispo駃bles"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Especificar as opci髇s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Vanuatu"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
+#: ../../any.pm:1
+#, fuzzy, c-format
msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
"\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"Un disco de arrinque personalizado d醠le a posibilidade de arrincar o seu\n"
+"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
+"ser\n"
+"鷗il se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
+"sistema\n"
+"operativo o borra ou se LILO non funciona coa configuraci髇 do seu equipo.\n"
+"Un disco de arrinque personalizado tam閚 pode ser usado coa imaxe de "
+"rescate\n"
+"de Mandrake, facendo as moito m醝s f醕il a recuperaci髇 no caso de fallo\n"
+"grave do sistema. 緿esexa crear un disco de arrinque para o seu sistema?"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Non pode usar un volume l髕ico LVM para o punto de montaxe %s"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Selecci髇 dos grupos de paquetes"
+msgid "Theme installation failed!"
+msgstr "Clase de instalaci髇"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Erro lendo o ficheiro %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Usar para loopback"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "usar pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
+
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s con aceleraci髇 3D por hardware EXPERIMENTAL"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "Avanzado"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Ficheiro de backup incorrecto"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (EUA)"
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Ficheiro de backup incorrecto"
+msgid "More Options"
+msgstr "Opci髇s do m骴ulo:"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Ficheiro de backup incorrecto"
+msgid "Afghanistan"
+msgstr "Iraniano"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
+"O cron un programa est醤dar de UNIX que executa programas especificados\n"
+"polo usuario en datas peri骴icas programadas. O vixie cron engade algunhas\n"
+"caracter韘ticas cron b醩ico de UNIX, incluindo mellor seguridade e\n"
+"opci髇s de configuraci髇 m醝s potentes."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "ea coidadosamente!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not erasable media!"
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Porto"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Probar portos"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Prema enter para arrincar o SO seleccionado, 'e' para editar os"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s not responding"
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Adaptador %s: %s"
+msgid "The encryption keys do not match"
+msgstr "Os contrasinais non coinciden"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
msgstr ""
#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Sen contrasinal"
-
-#: ../../standalone/drakbackup:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
+msgid "Resolutions"
+msgstr "Resoluci髇s"
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
+"drakfirewall configurator\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Eliminar fila"
+
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Configuraci髇 da rede"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS iniciando"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
msgstr ""
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Prema nunha partici髇"
+
#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "FATAL"
msgstr "FAT"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Borrar"
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Fallou a instalaci髇 do %s. Ocorreu o erro seguinte:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "Non, non quero login autom醫ico"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"P骴ese configurar o seu ordenador para que entre automaticamente\n"
+"en X arrincar. 緿esexa que se execute X reiniciar?"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Si, quero login autom醫ico con este (usuario, escritorio)"
+msgid "Build the disk"
+msgstr "Crear o disco"
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "conexi髇 por RDSI"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Lanzar o sistema X-Window iniciar"
+msgid "Status:"
+msgstr "Estado:"
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
#, c-format
-msgid "System mode"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "Proxy HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "Servidor NIS"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Protocolo de arrinque"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "Erro"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Themes"
+msgid "allow \"su\""
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Gardar a selecci髇 de paquetes"
+msgid "Australia"
+msgstr "serie"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Axudante da configuraci髇 de rede"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Clase de instalaci髇"
+msgid "Level"
+msgstr "nivel"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Notice"
-msgstr "bo"
+msgid "Change the printing system"
+msgstr "Configurar a rede"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "Configurar servicios"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "mount failed: "
+msgstr "mount fallou: "
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "Imaxe"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Opci髇s da impresora remota lpd"
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Backup %s to %s.old"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Crear unha nova partici髇"
+msgid "Selected All"
+msgstr "Seleccione un ficheiro"
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Instalar sistema"
+msgid "Webmin Service"
+msgstr "dispositivo"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "device"
+msgstr "dispositivo"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "All"
+msgstr "Todas"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Lilo/grub mode"
-msgstr "Modo de marcaci髇"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "縌ue sistema de impresi髇 desexa usar?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Yaboot mode"
-msgstr "Modo de arrinque"
+msgid "Greece"
+msgstr "Grego"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "An error occurred"
+msgstr "Ocorreu un erro"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Sa韗"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Este paquete ten que ser actualizado\n"
+"縀st seguro de que quere deseleccionalo?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armenio (m醧uina de escribir)"
+
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "/_File"
-msgstr "/_Ficheiro"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configuraci髇 do estilo de arrinque"
+msgid "Printer manufacturer, model, driver"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Pode escoller outras linguas que estar醤 dispo駃bles trala instalaci髇"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Sa韗 da instalaci髇"
+msgid "Printer on NetWare server"
+msgstr "Servidor de impresi髇"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Sa韗 da instalaci髇"
+#: ../../any.pm:1
+#, c-format
+msgid "Give the ram size in MB"
+msgstr "Indicar o tama駉 da memoria en MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "Nome real"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "done"
+msgstr "feito"
+
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Ferramentas de consola"
+msgid "Please uncheck or remove it on next time."
+msgstr "Escolla o porto serie onde est conectado o seu m骴em."
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Report"
-msgstr "Porto"
+msgid "Higher"
+msgstr "Alto"
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Elixa as partici髇s que desexa formatar"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Release: "
-msgstr "Agarde, por favor"
+msgid "Can't find %s on %s"
+msgstr "Adaptador %s: %s"
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Selecci髇 dos grupos de paquetes"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Autenticaci髇"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Axudante da configuraci髇 de rede"
+msgid "Japanese 106 keys"
+msgstr "Xapon閟 de 106 teclas"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Printerdrake"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows Migration tool"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Urpmi"
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Nome de recurso compartido"
+msgid "Delete selected rule"
+msgstr "Eliminar fila"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Impresora remota"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Servidor CUPS remoto"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Rato"
+msgid "Insert a floppy in %s"
+msgstr "Insira un disquete na unidade %s"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "obrigatorio"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Centro de control"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "compacto"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "1 minute"
+msgstr "1 minuto"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "no bus %d id %d\n"
+
+#: ../../printer/main.pm:1
#, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "First Time Wizard"
+msgid "Laos"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Centro de control"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Non hai partici髇s FAT para redimensionar ou para usar como loopback (ou non "
+"hai espacio libre dabondo)"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Par醡etros"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Firewall/Encami馻dor"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configuraci髇 da conexi髇 Internet"
+msgid "Area:"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr "Tarxeta Ethernet"
+msgid "Printer Server"
+msgstr "Servidor de impresi髇"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gateway"
-msgstr "Pasarela"
+msgid "Disconnection from the Internet complete."
+msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Tipo de conexi髇: "
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Configuraci髇"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Profile: "
-msgstr "Perfil: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet connection configuration"
-msgstr "Configuraci髇 da conexi髇 Internet"
+msgid "Saint Pierre and Miquelon"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "activate now"
-msgstr "Activar"
+msgid "Portugal"
+msgstr "Porto"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr "縏en algunha outra?"
+
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "deactivate now"
-msgstr "Activar"
+msgid ", printing to %s"
+msgstr "Erro escribindo ficheiro %s"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "Cliente DHCP"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Probe o seu rato"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Started on boot"
-msgstr "Iniciado o arrincar"
+msgid "Toggle to normal mode"
+msgstr "Mudar a modo normal"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr "Protocolo de arrinque"
+msgid "Generic"
+msgstr "Xen閞ico"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Cilindro %d a cilindro %d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "LAN Configuration"
-msgstr "Configuraci髇 da LAN"
+msgid "New profile..."
+msgstr "Novo perfil..."
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN configuration"
-msgstr "Configuraci髇 da LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "緼 que disco desexa desprazala?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Disconnect..."
-msgstr "Conectar..."
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Not connected"
-msgstr "Non conectado"
+msgid "Windows Domain"
+msgstr "Dominio NIS"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakpxe:1
#, fuzzy, c-format
-msgid "Connected"
-msgstr "Conectar..."
+msgid "Interface %s (on network %s)"
+msgstr "Interface %s (usando o m骴ulo %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "INFO"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface:"
-msgstr "Interface:"
+msgid "Wallis and Futuna"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Gateway:"
-msgstr "Pasarela:"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Apply"
+msgid "Is FPU present"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Click here to launch the wizard ->"
+msgid "There are no scanners found which are available on your system.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Wizard..."
-msgstr "Axudante..."
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Non hai informaci髇 adicional\n"
+"sobre este servicio, desculpe."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Status:"
-msgstr "Estado:"
+msgid "Build Single NIC -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Type:"
-msgstr "Tipo:"
+msgid "Is this correct?"
+msgstr "可 isto correcto?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet access"
-msgstr "Acceso Internet"
+msgid "Marshall Islands"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hostname: "
-msgstr "Nome de m醧uina: "
+msgid "Windows (FAT32)"
+msgstr "Windows(FAT32)"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configurar a rede de 醨ea local..."
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "Sen contrasinal"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "State"
-msgstr "Estado"
+msgid "Build All Kernels -->"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Driver"
-msgstr "Controlador"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Protocol"
-msgstr "Protocolo"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Non disp髇 de partici髇 de intercambio\n"
+"\n"
+"緿esexa continuar de calquera xeito?"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "Interface"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Servidor de impresi髇"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Configure Internet Access..."
-msgstr "Configurar o acceso Internet..."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "Nome de recurso compartido"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "縋ermitir o arrinque de CD?"
+
+#: ../../help.pm:1
#, c-format
-msgid "Wait please"
+msgid "Graphical Environment"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "Gibraltar"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New profile..."
-msgstr "Novo perfil..."
+msgid "on Tape Device"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Profile to delete:"
-msgstr "Perfil para borrar:"
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "M醧uina:"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Del profile..."
-msgstr "Borrar perfil..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "Cliente DHCP"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraci髇 de rede (%d adaptadores)"
+msgid "Filesystem type: "
+msgstr "Tipo de sist. de ficheiros: "
-#: ../../standalone/drakedm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Probando a conexi髇..."
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Vietnam"
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Descrici髇"
+
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
+msgid "Optimize your security by using Mandrake Linux"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
+msgid "Help"
+msgstr "Axuda"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "O seu n鷐ero de tel閒ono persoal"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "縌ue tama駉 desexa manter para o Windows en"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
+"A(s) p醲ina(s) de proba envi醨onse servidor de impresi髇.\n"
+"Pode que lle leve un pouco ata que a impresora comece.\n"
+"縁unciona correctamente?"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Nome de usuario"
+
+#: ../../help.pm:1
#, c-format
-msgid "Be sure a media is present for the device %s"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "Crear o disco"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Opci髇s de impresora SMB (Windows 9x/NT)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Output"
-msgstr "Sa韉a"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Remove a module"
-msgstr "Quitar un m骴ulo"
+msgid "mkinitrd optional arguments"
+msgstr "argumentos opcionais para o mkinitrd"
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Add a module"
-msgstr "Engadir un m骴ulo"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "omitir os m骴ulos scsi"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Protocol for the rest of the world"
+msgstr "Resto do mundo"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "if needed"
-msgstr "se for necesario"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print test pages"
+msgstr "Imprimindo p醲ina(s) de proba..."
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr "omitir os m骴ulos raid"
+msgid "64 MB or more"
+msgstr "64 MB ou m醝s"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "force"
-msgstr "forzar"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "argumentos opcionais para o mkinitrd"
+msgid "Please select the device where your %s is attached"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Expert Area"
-msgstr "羠ea de experto"
+msgid "Not formatted\n"
+msgstr "Non formatado\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "kernel version"
-msgstr "versi髇 do n鷆leo"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "defecto"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "Configuraci髇 da LAN"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup the system files before:"
+msgstr "Ficheiro de backup incorrecto"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Esta a seguridade recomendada para un ordenador usado para conectar\n"
+" Internet como cliente. Agora hai m醩 comprobaci髇s de seguridade."
+
+#: ../../any.pm:1
#, c-format
-msgid "General"
-msgstr "Xeral"
+msgid "First floppy drive"
+msgstr "Primeira unidade de disquete"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "boot disk creation"
-msgstr "creaci髇 do disquete de arrinque"
+msgid "/File/_Quit"
+msgstr "/Ficheiro/_Sa韗"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Dvorak"
+msgstr "Teclado dvorak"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Size"
-msgstr "Tama駉"
+msgid "Choose the new size"
+msgstr "Escoller o novo tama駉"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Module name"
-msgstr "Nome do m骴ulo"
+msgid "Media class"
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Sa韗 da instalaci髇"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
+msgid "Faroe Islands"
+msgstr "Island閟"
#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Mensaxe inicial"
+msgid "Restart XFS"
+msgstr "restrinxir"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Instalar"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add host/network"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Install & convert Fonts"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
+msgid "Please enter the directory to save to:"
+msgstr "Probe o seu rato"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Impresora remota"
+msgid "Model name"
+msgstr "Nome do m骴ulo"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Seleccione un ficheiro"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Albania"
+msgstr "Iraniano"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "here if no."
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "click here if you are sure."
+msgid "British Indian Ocean Territory"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Normal Mode"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Impresora"
+msgid "Printer connection type"
+msgstr "Compartici髇 da conexi髇 Internet"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Abortar"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Office"
+msgid "Network %s"
+msgstr "Interface de rede"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Elixa as partici髇s que desexa formatar"
-
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "About"
-msgstr "Abortar"
+msgid "Connect %s"
+msgstr "Conectar"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Font List"
-msgstr "Punto de montaxe"
+msgid "Restarting CUPS..."
+msgstr "restrinxir"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Configuraci髇 da LAN"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Desactivando a rede"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "Desinstalando os RPMs"
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Duplicate mount point %s"
+msgstr "Punto de montaxe %s duplicado"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Get Windows Fonts"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Formatar partici髇s"
-
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "done"
-msgstr "feito"
+msgid "Connection Configuration"
+msgstr "Configuraci髇 da conexi髇"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "restrinxir"
+msgid "Unknown|Generic"
+msgstr "Xen閞ico"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "Suppress Fonts Files"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "restrinxir"
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Quit"
+msgstr "Sa韗"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "Myanmar"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Asignaci髇 autom醫ica"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "緾omprobar os bloques err髇eos?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "Outros"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "Impresora remota"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication NIS"
+msgstr "Autenticaci髇 NIS"
+
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
+"A opci髇 ``restrinxir opci髇s da li馻 de comandos'' non ten sentido sen "
+"contrasinal"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "A compartici髇 da conexi髇 Internet est activada"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Card IO_0"
+msgstr "E/S_0 da tarxeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid "United Arab Emirates"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Preparando a instalaci髇"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Formatar disquete"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_1"
+msgstr "E/S_1 da tarxeta"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Search for fonts in installed list"
+msgid "Thailand"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "could not find any font.\n"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Reselect correct fonts"
+msgid "Kazakhstan"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "%s non atopado"
+#: ../../install_steps_newt.pm:1
+#, c-format
+msgid "Mandrake Linux Installation %s"
+msgstr "Instalaci髇 de Mandrake Linux %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Thai keyboard"
+msgstr "Teclado Thai"
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "Dialup options"
+msgstr "Opci髇s de chamada"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
+"ude o Cd-Rom!\n"
+"\n"
+"Por favor, insira o Cd-Rom etiquetado \"%s\" na unidade e prema Aceptar. Se "
+"non o ten, prema Cancelar para omitir a instalaci髇 deste Cd-Rom."
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Conexi髇 e configuraci髇 de Internet"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "A compartici髇 da conexi髇 Internet est activada"
-
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
-"Actualmente est activada."
+msgid "Polish"
+msgstr "Polaco"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
-"Actualmente est desactivada.\n"
-"\n"
-"縌ue desexa facer?"
+msgid "Mandrake Online"
+msgstr "Centro de control"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "\t-Network by webdav.\n"
msgstr ""
-"Xa est todo configurado.\n"
-"Agora pode compartir a conexi髇 Internet con outros ordenadores da rede de "
-"醨ea local, usando a configuraci髇 autom醫ica de rede (DHCP)."
#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando o paquete %s"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"Non se detectou ning鷑 adaptador de rede ethernet no seu sistema. Execute a "
+"ferramenta de configuraci髇 de hardware."
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando os scripts, instalando o software, iniciando os servidores..."
+msgid "Netmask"
+msgstr "M醩cara de rede"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Impresora local"
+
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr "Configurando..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"topouse un conflicto potencial de enderezos da LAN na configuraci髇 actual "
-"de %s!\n"
+msgid "2 buttons"
+msgstr "2 bot髇s"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "縌ue tipo de conexi髇 RDSI ten?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Label"
+msgstr "Etiqueta"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Gardar nun disquete"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer auto-detection"
+msgstr "Usar detecci髇 autom醫ica"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "緾al a sua tarxeta RDSI?"
+
+#: ../../services.pm:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS un protocolo popular para compartir ficheiros a trav閟 de redes TCP/"
+"IP.\n"
+"Este servicio fornece funcionalidade de servidor NFS, que se configura co\n"
+"ficheiro /etc/exports."
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Msec"
+msgstr "Rato"
+
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DHCP start range"
+msgid "Number of capture buffers:"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Sen impresora"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "緼 s鷄 escolla? (por omisi髇 %s)"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Franc閟"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Checo (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "non se atopou ningunha tarxeta de rede"
+msgid "Hardware probing in progress"
+msgstr "detectado no porto %s"
#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Servidor de impresi髇"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Summary"
+msgstr "Resume"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Configuraci髇 de Internet"
+msgid "Next"
+msgstr "Texto"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Configuraci髇 de Internet"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "縊nde quere instalar o cargador de arrinque?"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
+msgid "CHAP"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Configuraci髇 do estilo de arrinque"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "O monitor non est configurado"
+msgid "Puerto Rico"
+msgstr "Protocolo"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-"Escolla o adaptador de rede que vai estar conectado rede de 醨ea local."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituano \"ringleira de n鷐eros\" QWERTY"
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
-"S hai un adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Vaise configurar a rede de 醨ea local usando ese adaptador."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Network interface"
-msgstr "Interface de rede"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+msgid "Anguilla"
msgstr ""
-"Non se detectou ning鷑 adaptador de rede ethernet no seu sistema. Execute a "
-"ferramenta de configuraci髇 de hardware."
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "No network adapter on your system!"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
+msgid "NIS Domain"
+msgstr "Dominio NIS"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr "Ficheiros:\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando o m骴ulo %s)"
+msgid "Antarctica"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Servidor de impresi髇"
+msgid "Mount options"
+msgstr "Opci髇s do m骴ulo:"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+msgid "Jamaica"
msgstr ""
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-"Est a piques de configurar o seu ordenador para que comparta a conexi髇 "
-"Internet.\n"
-"\n"
-"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
-"醨ea local (LAN)."
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Compartici髇 da conexi髇 Internet"
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "A compartici髇 da conexi髇 Internet est agora activada."
+msgid "Please wait, preparing installation..."
+msgstr "Por favor, agarde, preparando a instalaci髇"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "Activando os servidores..."
+msgid "Czech (QWERTZ)"
+msgstr "Checo (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "dismiss"
+msgid "Track network card id (useful for laptops)"
msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "reconfigurar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The port number should be an integer!"
+msgstr "O n鷐ero de porto debe ser num閞ico"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "enable"
-msgstr "activar"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "URI do dispositivo de impresi髇"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
-"Actualmente est desactivada.\n"
-"\n"
-"縌ue desexa facer?"
+msgid "Restore from Hard Disk."
+msgstr "Restaurar a partir dun disquete"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A compartici髇 da conexi髇 Internet est desactivada"
+msgid "Add to LVM"
+msgstr "Engadir LVM"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "A compartici髇 da conexi髇 Internet est agora desactivada."
+msgid "DNS server"
+msgstr "Servidor DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "Desactivando os servidores..."
+msgid "Trinidad and Tobago"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "disable"
-msgstr "desactivar"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuraci髇 da compartici髇 da conexi髇 Internet xa foi feita.\n"
-"Actualmente est activada.\n"
-"\n"
-"縌ue desexa facer?"
+msgid "simple"
+msgstr "simple"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A compartici髇 da conexi髇 Internet est activada"
+msgid "Clear all"
+msgstr "Borrar todas"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No test pages"
+msgstr "Si, imprimir ambas p醲inas de proba"
+
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Adapter %s: %s"
+msgstr "Adaptador %s: %s"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Unknown model"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, fuzzy, c-format
-msgid "group :"
-msgstr "Grupo de traballo"
+msgid "authentication"
+msgstr "Autenticaci髇"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "user :"
-msgstr "Nome de usuario"
+msgid "Backup Now"
+msgstr "Sistemas de ficheiros"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Gardar a selecci髇 de paquetes"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_Ficheiro"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Usar detecci髇 autom醫ica"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Usar detecci髇 autom醫ica"
-
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Set-GID"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Set-UID"
+msgid "Mayotte"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Creando un disquete de auto-instalaci髇"
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Property"
-msgstr "Porto"
+msgid "Searching for scanners ..."
+msgstr "Impresora local"
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Versi髇: %s\n"
+msgid "Partitioning"
+msgstr "Impresora"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Current user"
-msgstr "Aceptar usuario"
+msgid "Russia"
+msgstr "Ruso"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "browse"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "tarxeta(s) ethernet detectada(s)"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Edit current rule"
+msgid "Syslog"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "edit"
+msgid "Can't create catalog!"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Eliminar fila"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Borrar"
+#: ../../share/advertising/11-mnf.pl:1
+#, c-format
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Sen impresora"
+msgid "Not enough free space for auto-allocating"
+msgstr "Non hai espacio libre dabondo para asignar novas partici髇s"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Engadir un m骴ulo"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Contrasinal de root"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Move selected rule down one level"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Down"
-msgstr "Feito"
-
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
+" redimensionar a partici髇 %s, perderanse t骴olos datos desta partici髇"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Up"
-msgstr ""
+msgid "Internet connection configuration"
+msgstr "Configuraci髇 da conexi髇 Internet"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "permissions"
-msgstr "partici髇 %s"
+msgid "/_About..."
+msgstr "/Axuda/_Acerca..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "group"
-msgstr "Grupo de traballo"
+msgid "Bengali"
+msgstr "activar"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "Nome de usuario"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr "Preferencia: "
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "path"
+msgid "Wizard..."
+msgstr "Axudante..."
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, c-format
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "Crear disquete de arrinque"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
+msgstr ""
+
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(m骴ulo %s)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
+msgstr "Grupo de traballo"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Creando un disquete de auto-instalaci髇"
+msgid "Printer host name or IP"
+msgstr "Servidor de impresi髇"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, fuzzy, c-format
-msgid "No image found"
-msgstr "Impresora local"
+msgid "Show current interface configuration"
+msgstr "Configuraci髇 de Internet"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Configuraci髇 da LAN"
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "Desenvolvemento"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Done"
+msgstr "Feito"
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Web Server"
+msgstr "Servidor"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Chile"
+msgstr "Rato"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interface %s (usando o m骴ulo %s)"
+#: ../../any.pm:1
+#, c-format
+msgid "(already added %s)"
+msgstr "(%s xa foi engadido)"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Escolla o adaptador de rede que desexa usar para conectar Internet"
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", using command %s"
+msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
msgstr ""
-"Est a piques de configurar o seu ordenador para que comparta a conexi髇 "
-"Internet.\n"
-"\n"
-"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
-"醨ea local (LAN)."
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Configuraci髇 da LAN"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
+msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Configuraci髇 da LAN"
+msgid "Add/Del Users"
+msgstr "Engadir usuario"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Por favor, agarde, preparando a instalaci髇"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Establecendo o nivel de seguridade"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
+msgid "Settings"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
+
+#: ../../any.pm:1
#, fuzzy, c-format
-msgid "System Options"
-msgstr "Opci髇s do m骴ulo:"
+msgid "Here is the full list of available countries"
+msgstr "Esta a lista completa de teclados dispo駃bles"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Opci髇s do m骴ulo:"
+msgid "Alternative test page (A4)"
+msgstr "Imprimindo p醲ina(s) de proba..."
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"Se ten t骴olos CDs na lista inferior, prema Aceptar.\n"
+"Se non ten ning鷑 deses CDs, prema Cancelar.\n"
+"Se s faltan alg鷑s dos CDs, desm醨queos, e prema Aceptar."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Opci髇s da impresora remota lpd"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Establecendo o nivel de seguridade"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Establecendo o nivel de seguridade"
+msgid "Backup user files"
+msgstr "Ficheiro de backup incorrecto"
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Por omisi髇)"
+msgid "New"
+msgstr "novo"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
-"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Non conectado"
+msgid "Load from floppy"
+msgstr "Restaurar a partir dun disquete"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "Vanse eliminar os seguintes paquetes"
+
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "URI do dispositivo de impresi髇"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Noruegu閟"
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Conexi髇 da impresora"
+msgid "Searching for new scanners ..."
+msgstr "Impresora local"
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Escolla a acci髇"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "choose image"
-msgstr "Escolla a acci髇"
+msgid "select path to restore (instead of /)"
+msgstr "Escolla o seu tipo de rato."
#: ../../standalone/draksplash:1
#, fuzzy, c-format
msgid "Configure bootsplash picture"
msgstr "Configurar servicios"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Display logo on Console"
+msgid "China"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Escolla o monitor"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Escolla o porto serie onde est conectado o seu m骴em."
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Instalar sistema"
+msgid "Georgia"
+msgstr "Noruegu閟"
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
#, fuzzy, c-format
-msgid "Preview"
-msgstr "dispositivo"
+msgid "Reading data of installed printers..."
+msgstr "Impresora local"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "servidor"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Insira un disquete formatado con FAT na unidade %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Por favor, agarde... Aplicando a configuraci髇"
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "瑽envido ao GRUB, o selector de sistemas operativos!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "text width"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Nome de recurso compartido"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Resoluci髇"
-
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
-msgid "first step creation"
-msgstr "creaci髇 do disquete de arrinque"
-
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "Nome de m醧uina"
-#: ../../standalone/drakxtv:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "No TV Card detected!"
+msgid "Ecuador"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Engadir usuario"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Have a nice day!"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "XawTV isn't installed!"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Houbo un erro instalar os paquetes:"
-
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanning for TV channels"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Area:"
-msgstr ""
+msgid "Shell"
+msgstr "Shell"
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Francia"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaian (lat韓)"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Europa"
+msgid "Package not installed"
+msgstr "Sa韗 da instalaci髇"
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Experto"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Japan (cable)"
+msgid "American Samoa"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Protocol"
+msgstr "Protocolo"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Canadiano (Qu閎ec)"
+msgid "Copy fonts on your system"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USA (cable-hrc)"
+msgid "Harddrake help"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "USA (cable)"
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Configuraci髇 de Internet"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"XawTV isn't installed!\n"
-"\n"
"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+" DrakBackup Report Details\n"
"\n"
"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "primary"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d segundos"
-
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Xen閞ico"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "unknown"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "Non pode seleccionar/deseleccionar este paquete"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Run config tool"
-msgstr ""
+msgid "Warning"
+msgstr "Advertencia"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Configurar o rato"
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr "Ficheiros:\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Information"
-msgstr "Mostrar informaci髇"
+msgid "Remote host name"
+msgstr "Nome do servidor"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Mire a informaci髇 sobre o hardware"
+msgid "deactivate now"
+msgstr "Activar"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Detectar discos duros"
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "detectado no porto %s"
+msgid "Computing the size of the Windows partition"
+msgstr "Usar o espacio libre da partici髇 de Windows"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
#, fuzzy, c-format
-msgid "Author:"
-msgstr "Autodetecci髇"
+msgid "Italy"
+msgstr "Italiano"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
-msgstr ""
+msgid "Name of printer"
+msgstr "Nome da impresora"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/Axuda/_Acerca..."
+msgid "disable"
+msgstr "desactivar"
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_Comunicar erro"
+msgid "error unmounting %s: %s"
+msgstr "erro desmontando %s: %s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Do it!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Seleccione unha tarxeta gr醘ica"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
+msgid "Cayman Islands"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Harddrake help"
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Descrici髇"
+msgid "Select model manually"
+msgstr "Impresora remota"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/_Help"
-msgstr "/A_xuda"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Sa韗"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Usar detecci髇 autom醫ica"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Usar detecci髇 autom醫ica"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Usar detecci髇 autom醫ica"
+msgid "Format"
+msgstr "Formatar"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "/_Options"
-msgstr "/_Opci髇s"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"O xeito m醝s habitual de conectar con adsl con pppoe.\n"
+"Algunhas conexi髇s usan pptp, e algunhas usan dhcp.\n"
+"Se non o sabe con certeza, escolla 'usar pppoe'"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "the vendor name of the processor"
+msgid "Various"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the vendor name of the device"
+msgid "Zip"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Escolla o porto serie onde est conectado o seu rato."
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatando"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "the number of the processor"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Processor ID"
+msgid "PDQ"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Impresora de rede (TCP/Socket)"
+msgid "Albanian"
+msgstr "Iraniano"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the name of the CPU"
+msgid "Lithuania"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Nome: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 bot髇s"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Compacto"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 bot髇s"
+msgid "Detected model: %s %s"
+msgstr "detectouse %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Official vendor name of the cpu"
+msgid "MandrakeSoft has selected the best software for you"
msgstr ""
#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "Nome do m骴ulo"
-
-#: ../../standalone/harddrake2:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Rato"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Memoria da tarxeta (DMA)"
+msgid "Local files"
+msgstr "Impresora local"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "maybe"
+msgstr "indiferente"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Media class"
+msgid "Panama"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "nivel"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatar"
+msgid "Monitor"
+msgstr "Monitor"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 mil cores (16 bits)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "Tama駉: %d KB\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "Lanzar X11 arrincar"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "Probe o seu rato"
#: ../../standalone/harddrake2:1
#, c-format
-msgid "Is FPU present"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Non hai partici髇s dabondo para o nivel RAID %d\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"Estas son as filas de impresi髇.\n"
+"Pode engadir unha nova ou cambiar as que xa existen."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connected"
+msgstr "Conectar..."
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "Sen impresora"
+
+#: ../../keyboard.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Macedonian"
+msgstr "Macedonio"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Flags"
-msgstr ""
+msgid "/File/_Save"
+msgstr "/Ficheiro/_Gardar"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid "Mali"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
-msgid "Module"
-msgstr "Rato"
+msgid "No details"
+msgstr "Detalles"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "very nice"
+msgstr "moi bo"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Dispositivo de pasarela"
+msgid "Preview"
+msgstr "dispositivo"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "Impresora remota"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Seleccione un ficheiro"
+msgid "Please select media for backup..."
+msgstr "Escolla a lingua que desexe usar."
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "This field describes the device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "Servidor XFree86: %s\n"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "Cliente DHCP"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Xeorxiano (\"ruso\")"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Opci髇s"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Establecendo o nivel de seguridade"
+msgid "Your printer model"
+msgstr "Impresora remota"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cpuid family"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Configuraci髇 de Internet"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Estado:"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Drive capacity"
+msgid "The %s is unsupported"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
+msgid "Load the drivers for your usb devices."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, fuzzy, c-format
-msgid "Cache size"
-msgstr "tama駉 do bloque de datos"
+msgid "Disk"
+msgstr "Dinamarqu閟"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "URI do dispositivo de impresi髇"
+
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Location on the bus"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "Israel"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Guiana"
+msgstr "Franc閟"
+
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Autenticaci髇"
+msgid "add a rule"
+msgstr "Engadir un m骴ulo"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "A command line must be entered!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bogomips"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Transfer printer configuration"
+msgstr "Configuraci髇 de Internet"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Channel"
-msgstr "Cancelar"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "緿esexa que a conexi髇 se inicie arrincar?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Porto"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Ficheiro de backup incorrecto"
+
+#: ../../security/help.pm:1
#, c-format
-msgid "Bus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Imprimindo p醲ina(s) de proba..."
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Accept user"
+msgstr "Aceptar usuario"
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "縌uere que a tecla de Borrar devolva Suprimir na consola?"
+msgid "Server"
+msgstr "Servidor"
-#: ../../standalone/keyboarddrake:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Escolla a disposici髇 do seu teclado."
+msgid "Bad choice, try again\n"
+msgstr "Elecci髇 incorrecta, tente de novo\n"
-#: ../../standalone/livedrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
+msgid "Heard and McDonald Islands"
msgstr ""
-#: ../../standalone/livedrake:1
-#, fuzzy, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No alternative driver"
msgstr ""
-"Por favor, insira o Cd-Rom de instalaci髇 na unidade e prema Aceptar.\n"
-"Se non o ten, prema Cancelar para evitar a actualizaci髇 "
-#: ../../standalone/livedrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "Mude o Cd-Rom"
+msgid "Toggle to expert mode"
+msgstr "Mudar a modo experto"
-#: ../../standalone/localedrake:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "(on this machine)"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
+
+#: ../../network/modem.pm:1
#, c-format
-msgid "Save as.."
-msgstr "Gardar como..."
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Tente de novo"
+msgid "Looking at packages already installed..."
+msgstr "Non pode deseleccionar este paquete. Xa est instalado"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Configuraci髇"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Driver"
+msgstr "Controlador"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "load setting"
-msgstr "Formatando"
+msgid "Printer on remote lpd server"
+msgstr "Servidor lpd remoto"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "interesante"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Servidor de impresi髇"
+#: ../../mouse.pm:1
+#, c-format
+msgid "No mouse"
+msgstr "Ning鷑 rato"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "dispositivo"
+msgid "Germany"
+msgstr "Alem醤"
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "Servidor NIS"
+msgid "Austria"
+msgstr "serie"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "Servidor NIS"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Bases de datos"
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Collapse Tree"
+msgstr "Pechar 醨bore"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "Servidor NIS"
+msgid "Auto Install Configurator"
+msgstr "Configuraci髇 trala instalaci髇"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Nome de dominio"
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "Configurar a rede"
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "縊nde quere instalar o cargador de arrinque?"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
"\n"
-"Here, you'll be able to set up the alert system.\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Configuraci髇 da LAN"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Mail alert"
+msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
+msgid "DHCP client"
+msgstr "Cliente DHCP"
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Content of the file"
-msgstr ""
+msgid "Restoring from file %s failed: %s"
+msgstr "Fallou a restauraci髇 a partir do ficheiro %s: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Calendar"
-msgstr ""
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Rato Logitech (serie, antigo tipo C7)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose file"
+msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "but not matching"
-msgstr "M醧uina:"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, fuzzy, c-format
-msgid "matching"
-msgstr "M醧uina:"
+msgid "New devfs device"
+msgstr "Dispositivo de pasarela"
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Settings"
+msgid "ERROR: Cannot spawn %s."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
+msgid "Boot Style Configuration"
+msgstr "Configuraci髇 do estilo de arrinque"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Configuraci髇 do estilo de arrinque"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "search"
+msgid "Backup files not found at %s."
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr ""
+msgid "Armenian (phonetic)"
+msgstr "Armenio (fon閠ico)"
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, fuzzy, c-format
-msgid "Messages"
-msgstr "Mensaxe inicial"
+msgid "Card model:"
+msgstr "Memoria da tarxeta (DMA)"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
-msgid "User"
-msgstr "Nome de usuario"
+msgid "Thin Client"
+msgstr "Cliente DHCP"
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Axuda/_Acerca..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "Servidor NIS"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/Opci髇s/Proba"
+msgid "Turkmenistan"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Impresora remota"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Instalar sistema"
+
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/-"
-msgstr "Ficheiro/-"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/Ficheiro/Gardar _como"
+msgid "Espanol"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "<control>S"
-msgstr "<control>G"
+msgid "Preparing installation"
+msgstr "Preparando a instalaci髇"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/Ficheiro/_Gardar"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "Engadir usuario"
+
+#: ../../lang.pm:1
#, c-format
-msgid "<control>O"
-msgstr "<control>A"
+msgid "Nauru"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "Preparando a instalaci髇"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/File/_Open"
-msgstr "/Ficheiro/_Abrir"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "LAN configuration"
+msgstr "Configuraci髇 da LAN"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Memoria da tarxeta (DMA)"
+
+#: ../../fsedit.pm:1
#, c-format
-msgid "/File/_New"
-msgstr "/Ficheiro/_Novo"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Non pode usar un volume l髕ico LVM para o punto de montaxe %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Show only for the selected day"
+msgid "Get Windows Fonts"
msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Emulate third button?"
-msgstr "縀mular o terceiro bot髇?"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "Escolla o seu tipo de rato."
+msgid "Iranian"
+msgstr "Iraniano"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Conectar"
+msgid "Croatia"
+msgstr "Croata"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Gateway:"
+msgstr "Pasarela:"
+
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "conexi髇 por RDSI"
+msgid "Add server"
+msgstr "Engadir usuario"
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "Impresora remota"
-#: ../../standalone/net_monitor:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "received"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Device: "
+msgstr "Dispositivo: "
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "received: "
-msgstr ""
+msgid "Printerdrake"
+msgstr "Printerdrake"
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "sent: "
-msgstr ""
+msgid "License agreement"
+msgstr "Acordo da licencia"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/draksec:1
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Impresora local"
+msgid "System Options"
+msgstr "Opci髇s do m骴ulo:"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "average"
+msgid "Please enter the directory where backups are stored"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Configuraci髇"
+msgid "Please choose the desired security level"
+msgstr "Escola o nivel de seguridade"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Tipo de conexi髇: "
+msgid ", USB printer"
+msgstr "Sen impresora"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Choose the applications that will support the fonts:"
+msgstr "Elixa as partici髇s que desexa formatar"
+
+#: ../../steps.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "Configure X"
+msgstr "Configurar as X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turco (tradicional modelo \"F\")"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Conectar Internet"
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Congratulations!"
+msgstr "oraboa!"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Conectar Internet"
+msgid "Use owner id for execution"
+msgstr "Usar detecci髇 autom醫ica"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Probando a conexi髇..."
+msgid "Down"
+msgstr "Feito"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logs"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Tipo de conexi髇: "
+msgid "Install rpm"
+msgstr "Instalar"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Receiving Speed:"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Gardar nun ficheiro"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Tempo restante "
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Statistics"
-msgstr ""
+msgid "UK keyboard"
+msgstr "Brit醤ico"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Perfil: "
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "Desmontar"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Configuraci髇 da rede"
+msgid "Uninstall Fonts"
+msgstr "Desinstalando os RPMs"
-#: ../../standalone/printerdrake:1
+#: ../../mouse.pm:1
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Impresora local"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "German (no dead keys)"
+msgstr "Alem醤 (sen teclas acentuadas)"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Transferring %s..."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Seleccione unha tarxeta gr醘ica"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Probe o seu rato"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 mil cores (15 bits)"
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Impresora local"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "M醧uina:"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Eliminar fila"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "detectouse %s"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Engadir usuario"
+msgid "Reboot"
+msgstr "Ra韟"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "Gambia"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Usar espacio libre"
+msgid "Mandrake Control Center"
+msgstr "Centro de control"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Impresora remota"
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "\t-Tape \n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Impresora"
+msgid "Remember this password"
+msgstr "Sen contrasinal"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Internet Connection Sharing is now enabled."
+msgstr "A compartici髇 da conexi髇 Internet est agora activada."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Impresora local"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Impresora local"
+msgid "Use the free space on the Windows partition"
+msgstr "Usar o espacio libre da partici髇 de Windows"
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Impresora"
+msgid "%s found on %s, configure it automatically?"
+msgstr "緿esexa configurar unha impresora?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Add a scanner manually"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Impresora local"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "Controlador de XFree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
msgid ""
-"The following scanner\n"
"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
+" DrakBackup Report \n"
"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+msgid "Choose the packages you want to install"
+msgstr "Escolla os paquetes que desexa instalar"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Papua New Guinea"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, fuzzy, c-format
-msgid "choose device"
-msgstr "Dispositivo de arrinque"
+msgid "Serbian (cyrillic)"
+msgstr "Azerbaian (cir韑ico)"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please select the device where your %s is attached"
+msgid "Make kernel message quiet by default"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Impresora local"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "緿esexa probar a impresi髇?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP end range"
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "Creando o disco de arrinque"
+
+#: ../../standalone/net_monitor:1
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Usar detecci髇 autom醫ica"
+msgid "Wait please, testing your connection..."
+msgstr "Probando a conexi髇..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "Desactivando a rede"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
+msgid "Login ID"
+msgstr "ID do login"
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "The %s is unsupported"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
+"NFS un protocolo popular para compartir ficheiros a trav閟 de\n"
+"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "DHCP Client"
+msgstr "Cliente DHCP"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid "dismiss"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Porto"
+msgid "Printing/Scanning on \"%s\""
+msgstr "Desactivando a rede"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ", "
+msgid "omit raid modules"
+msgstr "omitir os m骴ulos raid"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd o daemon de impresi髇 requirido para que o lpr funcione\n"
+"correctamente. basicamente un servidor que distrib鷈 os traballos de\n"
+"impresi髇 (s) impresora(s)."
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "detectouse %s"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "Configuraci髇 da conexi髇 Internet"
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid " ("
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Seleccione unha tarxeta gr醘ica"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "Move selected rule up one level"
msgstr ""
#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "緿esexa configurar unha impresora?"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "on hai ning鷑 adaptador de rede no seu sistema!"
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "detectado no porto %s"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "緿esexa reiniciar a rede?"
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "I can't find any room for installing"
+msgstr "Non se pode atopar espacio para a instalaci髇"
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Impresora local"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Welcome to the Open Source world."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Modificar o RAID"
-#: ../../share/advertising/02-community.pl:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
+"Detectouse unha Tarxeta RDSI PCI, pero se desco馿ce o tipo. Seleccione unha "
+"tarxeta PCI na seguinte pantalla."
-#: ../../share/advertising/02-community.pl:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
+msgid "Add user"
+msgstr "Engadir usuario"
-#: ../../share/advertising/02-community.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "Discos RAID %s\n"
-#: ../../share/advertising/03-software.pl:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "serie"
+
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Escoller teclado"
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Format partitions"
+msgstr "Formatar partici髇s"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Configuraci髇 do estilo de arrinque"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Lendo a base de datos de controladores de CUPS..."
+
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "enable radio support"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Configuraci髇 de Internet"
+msgid "Scanner sharing to hosts: "
+msgstr "Impresora"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Nome do ficheiro loopback: %s"
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Escolla o porto serie onde est conectado o seu m骴em."
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "A customizable environment"
+msgid "Do not transfer printers"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Retardo antes de arrincar a imaxe por omisi髇"
+
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Prema nunha partici髇"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Nome de usuario"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Ficheiro de backup incorrecto"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configure"
+msgstr "Configurar as X"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Seleccione unha tarxeta gr醘ica"
+
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
+"Introduza o nome da s鷄 m醧uina.\n"
+"Ese nome debe ser un nome completamente cualificado,\n"
+"como ``mi馻maquina.meulab.mi馻comp.es''.\n"
+"Pode tam閚 introducir o enderezo IP da pasarela se usa unha"
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Selecci髇 da conexi髇 da impresora"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Crear unha nova partici髇"
+
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Impresora local"
+
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"Alg鷑s paquetes importantes non se instalaron correctamente.\n"
+"A unidade de cdrom ou o cdrom est醤 defectuosos.\n"
+"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl Mandrake/RPMS/"
+"*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "detectouse %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
-#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Azerbaijan"
+msgstr "Iraniano"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (EUA)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "緾omo est conectada a impresora?"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Experto"
-
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "Security level"
+msgstr "Establecendo o nivel de seguridade"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Resoluci髇"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Experto"
+msgid "Services"
+msgstr "dispositivo"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -17018,10 +17056,6 @@ msgstr ""
"c醠culo (kspread, gnumeric), visualizadores de pdf, etc"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estaci髇 de traballo"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Estaci髇 de xogos"
@@ -17095,10 +17129,6 @@ msgstr ""
"ferramentas que o acompa馻n"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Estaci髇 de traballo Gnome"
@@ -17119,10 +17149,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Desenvolvemento"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr ""
"Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include"
@@ -17195,40 +17221,83 @@ msgstr ""
#: ../../share/compssUsers:999
#, fuzzy
-msgid "Audio station"
-msgstr "Estaci髇 multimedia"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Conxunto de ferramentas para ler e enviar correo e novas (pine, mutt, tin..) "
+"e para navegar na Web"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Conexi髇 e configuraci髇 de Internet"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Programas de reproducci髇/edici髇 de son e v韉eo"
+#~ msgid "Configure the connection"
+#~ msgstr "Configurar a rede"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video station"
-msgstr "Estaci髇 de xogos"
+#~ msgid "Disconnect"
+#~ msgstr "conexi髇 por RDSI"
+
+#~ msgid "Connect"
+#~ msgstr "Conectar"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Pode reconfigurar a s鷄 conexi髇."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Pode conectar Internet ou reconfigurar a s鷄 conexi髇."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Non est neste intre conectado Internet."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Pode desconectar ou reconfigurar a s鷄 conexi髇."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Est neste intre conectado internet."
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Video playing programs"
-msgstr "Programas de reproducci髇/edici髇 de son e v韉eo"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphic station"
-msgstr "Estaci髇 de xogos"
+#~ msgid "Author:"
+#~ msgstr "Autodetecci髇"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Graphics programs"
-msgstr "Programas gr醘icos como o Gimp"
+#~ msgid "Audio station"
+#~ msgstr "Estaci髇 multimedia"
-#: ../../share/compssUsers:999
#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Conxunto de ferramentas para ler e enviar correo e novas (pine, mutt, tin..) "
-"e para navegar na Web"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Programas de reproducci髇/edici髇 de son e v韉eo"
+
+#, fuzzy
+#~ msgid "Video station"
+#~ msgstr "Estaci髇 de xogos"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Programas de reproducci髇/edici髇 de son e v韉eo"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Estaci髇 de xogos"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Programas gr醘icos como o Gimp"
#, fuzzy
#~ msgid "Printer sharing"
@@ -17386,10 +17455,6 @@ msgstr ""
#~ "usa, non necesita /boot"
#, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Actualizaci髇"
-
-#, fuzzy
#~ msgid "Do you want to configure another printer?"
#~ msgstr "緿esexa probar a configuraci髇?"
diff --git a/perl-install/share/po/he.po b/perl-install/share/po/he.po
index 79f06af85..6d206bea6 100644
--- a/perl-install/share/po/he.po
+++ b/perl-install/share/po/he.po
@@ -2,955 +2,1483 @@
# Copyright (C) 2003 Free Software Foundation, Inc.
# This file is distributed under the GNU GPL license.
# Ram Matityahu <linuxfun@email.com>, 2003.
+# nadav mavor <nadav@mavor.com>, 2003
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-he\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-03-12 22:59+0000\n"
-"Last-Translator: dovix <dovix2003@yahoo.com>\n"
-"Language-Team: Hebrew <en@li.org>\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-05-09 12:37+0000\n"
+"Last-Translator: nadav mavor <nadav@mavor.com>\n"
+"Language-Team: Hebrew\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.6\n"
+"X-Generator: KBabel 1.0.1\n"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "住讜专拽 讗转 讛诪讞讬爪讜转 讻讚讬 诇诪爪讜讗 谞拽讜讚讜转 讞讬讘讜专"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "驻讜专讟 诪转驻住转 专砖转"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
-"讛砖讬转讜祝 诇-诪砖转诪砖, 诪砖转诪砖 讘拽讘讜爪讛 \"砖讬转讜祝-拽讘爪讬诐\".\n"
-"讘讬讻讜诇转讱 诇讛砖转诪砖 讘注讜专讱 讛诪砖转诪砖讬诐 讻讚讬 诇讛讜住讬祝 诪砖转诪砖 诇拽讘讜爪讛 讝讜."
+"砖讜诇讞谉 讛诪讞讬爪讜转 讗讬谞讜 转讜讗诐 讘讙讜讚诇讜\n"
+"讛讗诐 诇讛诪砖讬讱 讘讻诇 诪拽专讛?"
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Cancel"
-msgstr "讘讬讟讜诇"
+msgid "Which username"
+msgstr "讗讬讝讛 砖诐 诪砖转诪砖"
#: ../../any.pm:1
#, c-format
-msgid "Launch userdrake"
-msgstr "讛驻注诇转 userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "讗讬讝讛 住讜讙 '讻谞讬住讛' 讘专爪讜谞讱 诇讛讜住讬祝?"
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "砖讞讝专 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "注诇 砖专转 CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "讛讙讚专讜转 诇驻谞讬-讛转拽谞讛"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "诪砖转诪砖 讘''%s''讘诪拽讜诐"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "住讜讙"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
"\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-"讛讗诐 讘专爪讜谞讱 诇讗驻砖专 诇诪砖转诪砖讬诐 诇砖转祝 讞诇拽 诪讛转讬拽讬讜转 砖诇讛诐?\n"
-"讛住讻诪转讱 诇注砖讜转 讝讗转 转讗驻砖专 诇诪砖转诪砖 驻砖讜讟 诇诇讞讜抓 注诇 \"砖转祝\" 讘拽讜谞拽讬讜专讜专 讜讘谞讗讜讟讬诇住.\n"
-"\n"
-"\" 讛转讗诪讛 讗讬砖讬转\" 转讗驻砖专 讛转讗诪讛 诇讻诇 诪砖转诪砖.\n"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "讞讘讬诇讛 讘住讬住讬转 %s 讞住专讛"
+msgid "Sri Lanka"
+msgstr "住专讬 诇谞拽讛"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "讘讬讻讜诇讱 诇讬爪讗 讘砖讬诪讜砖 NFS 讗讜 Samba. 讘讘拽砖讛 讘讞专 讘诪讛 讘专爪讜谞讱 诇讛砖转诪砖."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"讛诪讚驻住转 讛讘讗讛\n"
+"\n"
+"%s%s\n"
+"诪讞讜讘专(讜)转 讬砖讬专讜转 诇诪注专讻转 砖诇讱"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "讛讞讘讬诇讛 %s 讚专讜砖讛 诇讛讬讜转 诪讜转拽谞转. 讛讗诐 讘专爪讜谞讱 诇讛转拽讬谞讛?"
+msgid "Central African Republic"
+msgstr "讛专驻讜讘诇讬拽讛 讛诪专讻讝-讗驻专讬拽讗讬转"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Custom"
-msgstr "诪讜转讗诐 讗讬砖讬转"
+msgid "Gateway device"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Allow all users"
-msgstr "讛专砖讛 诇讻诇 讛诪砖转诪砖讬诐"
+msgid "Net Method:"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "No sharing"
-msgstr "诇诇讗 砖讬转讜祝"
+msgid "Ethernetcard"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "More"
-msgstr "注讜讚"
+msgid "Parameters"
+msgstr ""
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Here is the full list of available countries"
-msgstr "讛谞讛 讛专砖讬诪讛 讛诪诇讗讛 砖诇 讛诪拽诇讚讜转 讛讝诪讬谞讜转"
+msgid "Auto-detect"
+msgstr "讝讬讛讜讬-讗讜讟讜诪讟讬"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Please choose your country."
-msgstr "讘讞讬专转 讗专抓"
+msgid "Interface:"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid " / Region"
+msgid "Select installation class"
msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Country"
-msgstr "讗专抓"
+msgid "on CDROM"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "All languages"
-msgstr "讻诇 讛砖驻讜转"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Unicode by default"
-msgstr "砖讬诪讜砖 讘Unicode 讻讘专讬专转 诪讞讚诇"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "讘诇专讜住"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "砖讙讬讗讛 讘讻转讬讘讛 诇拽讜讘抓 %s"
+
+#: ../../services.pm:1
#, c-format
msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
-"诇讬谞讜拽住 诪谞讚专讬讬拽 讬讻讜诇讛 诇转诪讜讱 讘专讬讘讜讬 砖驻讜转. 讘讞专\n"
-"讗转 讛砖驻讜转 砖讘专爪讜谞讱 诇讛转拽讬谉. 讛谉 讬讛讬讜 讝诪讬谞讜转 讻讗砖专\n"
-"转住讬讬诐 讗转 讛讛转拽谞讛 讜转驻注讬诇 诪讞讚砖 讗转 讛诪讞砖讘."
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please choose a language to use."
-msgstr "讗谞讗 讘讞专 砖驻讛 诇砖讬诪讜砖."
+msgid "Use tape to backup"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "讘讞专 讗转 诪谞讛诇 讛讞诇讜谞讜转 砖讬专讜抓:"
+msgid "The following packages are going to be installed"
+msgstr "注讜诪讚 诇讛转拽讬谉 讗转 讛讞讘讬诇讜转 讛讘讗讜转"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the default user:"
-msgstr "讘讞专 诪砖转诪砖 讘专讬专转 诪讞讚诇: "
+msgid "CUPS configuration"
+msgstr "讛讙讚专转 CUPS"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do you want to use this feature?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘讝讛 讘注转讬讚?"
+msgid "Hong Kong"
+msgstr "讛讜谞讙 拽讜谞讙"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "讬砖 讗驻砖专讜转 诇讻讱 砖讻砖讛诪讞砖讘 讬注诇讛 讛讜讗 讬讻谞住 讗讜讟讜诪讟讬转 诇讞砖讘讜谉 砖诇 讗讞讚 讛诪砖转诪砖讬诐."
+msgid "Not enough free space to allocate new partitions"
+msgstr "讗讬谉 诪住驻讬拽 诪拽讜诐 驻谞讜讬 诇诪拽诐 讗转 讛诪讞讬爪讜转 讛讞讚砖讜转"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Autologin"
-msgstr "讻谞讬住讛-讗讜讟讜诪讟讬转"
+msgid "Moving"
+msgstr "诪注讘讬专"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Icon"
-msgstr "住诪诇"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Shell"
-msgstr "诪注讟驻转"
+msgid "("
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Password (again)"
-msgstr "住讬住诪讛(砖讜讘)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "Password"
-msgstr "住讬住诪讛"
+msgid ")"
+msgstr ""
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "User name"
-msgstr "砖诐 诪砖转诪砖"
+msgid "Lebanon"
+msgstr "诇讘谞讜谉"
-#: ../../any.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Real name"
-msgstr "砖诐 讗诪讬转讬"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Accept user"
-msgstr "拽讘诇转 诪砖转诪砖"
+msgid "Stop"
+msgstr "注爪讬专讛"
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Done"
-msgstr "住讬讜诐"
+msgid "Edit selected host"
+msgstr "注专讜讱 诪讗专讞 砖谞讘讞专"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "No CD device defined!"
msgstr ""
-"讛讻谞住转 诪砖转诪砖\n"
-"%s"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add user"
-msgstr "讛讜住驻转 诪砖转诪砖"
+msgid "Bulgarian (phonetic)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "This user name has already been added"
-msgstr "诪砖转诪砖 讝讛 讻讘专 谞讜住祝"
+msgid "The DHCP start ip"
+msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "The user name is too long"
-msgstr "砖诐 讛诪砖转诪砖 讗专讜讱 诪讬讚讬讬"
+msgid "256 kB"
+msgstr "256 kB"
#: ../../any.pm:1
#, c-format
+msgid "Bootloader main options"
+msgstr "讛讙讚专讜转 专讗砖讬讜转 砖诇 诪讗转讞诇 讛诪注专讻转"
+
+#: ../../standalone.pm:1
+#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "砖诐 讛诪砖转诪砖 讞讬讬讘 诇讛讻讬诇 讗讱 讜专拽 讘讗讜转讬讜转 拽讟谞讜转, 诪住驻专讬诐, 讘'-', 讜讘'_'"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Please give a user name"
-msgstr "讗谞讗 转谉 砖诐 诪砖转诪砖"
+msgid "Tape"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This password is too simple"
-msgstr "讛住讬住诪讛 驻砖讜讟讛 诪讬讚讬讬"
+msgid "Scanning network..."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malaysia"
+msgstr "诪诇讝讬讛"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swiss (French layout)"
+msgstr ""
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "谞讻砖诇 mkraid (讗讜诇讬 讻诇讬 raid 讞住专讬诐?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "讙讜讚诇 诪讟诪讜谉 讛诪注讘讚 (砖诇讘 砖谞讬)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "讻专讟讬住 拽讜诇"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"讻讚讬 诇讛讚驻讬住 拽讜讘抓 诪砖讜专转 讛驻拽讜讚讛 (讛诪注讟驻转) 讬砖 诇讛砖转诪砖 讘驻拽讜讚讛 \"%s <file>\".\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please try again"
-msgstr "讗谞讗 谞住讛 砖讜讘"
+msgid "Level %s\n"
+msgstr "砖诇讘 %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The passwords do not match"
-msgstr "讛住讬住诪讗讜转 诇讗 讝讛讜转"
+msgid "Luxembourg"
+msgstr "诇讜讻住诪讘讜专讙"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(already added %s)"
-msgstr "讻讘专 谞讜住祝 %s"
+msgid ""
+"\n"
+" DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to compilation tools"
-msgstr "讻谞讬住讛 诇讻诇讬 讛讬讚讜专"
+msgid "Iran"
+msgstr "讗讬专谉"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "access to network tools"
-msgstr "讻谞讬住讛 诇讻诇讬 专砖转"
+msgid "Bus"
+msgstr "Bus"
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "access to administrative files"
-msgstr "讻谞讬住讛 诇拽讘爪讬 谞讬讛讜诇"
+msgid "Iraq"
+msgstr "注讬专拽"
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "allow \"su\""
-msgstr "讛专砖讛 \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to rpm tools"
-msgstr "讻谞讬住讛 诇讻诇讬 rpm"
+msgid "Configuring..."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "access to X programs"
-msgstr "讻谞讬住讛 诇转讜讻谞讬讜转 X"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "讛讛讙讚专讜转 讻讘专 谞注砖讜, 讜讻专讙注 讛谉 讗驻砖专讬讜转."
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
msgstr ""
-"讛谞讛 讛讻谞讬住讜转 诇转驻专讬讟 讛讛驻注诇讛 注讚 注讻砖讬讜.\n"
-"讘讗驻砖专讜转讱 诇讬爪讜专 讻谞讬住讜转 谞讜住驻讜转 讗讜 诇砖谞讜转 讗转 讛拽讬讬诪讜转."
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Other OS (windows...)"
-msgstr "诪注专讻转 讛驻注诇讛 讗讞专转(windows...)"
+msgid "Password (again)"
+msgstr "住讬住诪讛(砖讜讘)"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "诪注专讻转 讛驻注诇讛 讗讞专转(MacOS...)"
+msgid "Search installed fonts"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "诪注专讻转 讛驻注诇讛 讗讞专转 (SunOS...)"
+msgid "Venezuela"
+msgstr "讜谞爪讜讗诇讛"
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Linux"
-msgstr "诇讬谞讜拽住"
+msgid "IP address"
+msgstr "讻转讜讘转 IP"
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "讗讬讝讛 住讜讙 '讻谞讬住讛' 讘专爪讜谞讱 诇讛讜住讬祝?"
+msgid "Choose the sizes"
+msgstr "讘讞专 讗转 讛讙讚诇讬诐"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This label is already used"
-msgstr "讛转讜讜讬转 讛讝讗转 讻讘专 讘砖讬诪讜砖"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "You must specify a root partition"
-msgstr "讗转讛 讞讬讬讘 诇爪讬讬谉 诪讞讬爪讛 专讗砖讬转"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"讛诪讜讚诐 砖诇讱 讗讬谞讜 谞转诪讱 注诇 讬讚讬 讛诪注专讻转.\n"
+"转注讬驻讜 诪讘讟 讘http://www.linmodems.org"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You must specify a kernel image"
-msgstr "讗转讛 讞讬讬讘 诇爪讬讬谉 转诪讜谞转 讙专注讬谉"
+msgid "Choose another partition"
+msgstr "讬砖 诇讘讞讜专 诪讞讬爪讛 讗讞专转"
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Empty label not allowed"
-msgstr "转讜讜讬转 专讬拽讛 讗住讜专讛"
+msgid "Current user"
+msgstr "诪砖转诪砖 谞讜讻讞讬"
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Default"
-msgstr "讘专讬专转 诪讞讚诇"
+msgid "Username"
+msgstr "砖诐 诪砖转诪砖"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "NoVideo"
-msgstr "讗讬谉 转爪讜讙讛"
+msgid "Left \"Windows\" key"
+msgstr "诪拽砖 \"讞诇讜谞讜转\" 讛砖诪讗诇讬"
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Initrd-size"
-msgstr "讙讜讚诇 Initrd"
+msgid "dhcpd Server Configuration"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Append"
-msgstr "讛讜住驻讛"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
-#: ../../any.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Label"
-msgstr "转讜讜讬转"
+msgid "Guyana"
+msgstr "讙讬讗谞讛"
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Unsafe"
-msgstr "诇讗 讘讟讜讞"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr "注诇 砖专转 谞讜讘诇 \"%s\", 诪讚驻住转 \"%s\""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Table"
-msgstr "砖讜诇讞谉"
+msgid "Remove a module"
+msgstr "讛住专转 诪讜讚讜诇"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "住讬住诪讛"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr ""
#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "专讗砖讬"
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-write"
-msgstr "拽专讬讗讛-讻转讬讘讛"
+msgid "Choose an existing RAID to add to"
+msgstr ""
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "讟讜专拽讬转 (诪讜讚诇 \"Q\" 诪讜讚专谞讬)"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Video mode"
-msgstr "诪爪讘 转爪讜讙讛"
+msgid "Lilo message not found"
+msgstr "讛讜讚注转 Lilo 诇讗 谞诪爪讗讛"
-#: ../../any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Image"
-msgstr "转诪讜谞讛"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Default OS?"
-msgstr "诪注专讻转 讛驻注诇讛 - 讘专讬专转 诪讞讚诇?"
+msgid "if needed"
+msgstr "讗诐 讚专讜砖"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Enable OF Boot?"
-msgstr "诇讗驻砖专 讗转讞讜诇?"
+msgid "Restore Failed..."
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Enable CD Boot?"
-msgstr "诇讗驻砖专 讗转讞讜诇 注诐 讚讬住拽(cd)?"
+msgid "/Autodetect _jazz drives"
+msgstr "/讝讬讛讜讬 讗讜讟讜诪讟讬 砖诇 讻讜谞谞讬 _jazz"
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "驻讙 讝诪谉 讗转讞讜诇 讙专注讬谉"
+msgid ""
+"Description:\n"
+"\n"
+" Drakbackup is used to backup your system.\n"
+" During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ... and Other (like Windows Partitions)\n"
+"\n"
+" Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+" Drakbackup allows you to restore your system to\n"
+" a user selected directory.\n"
+"\n"
+" Per default all backups will be stored on your\n"
+" /var/lib/drakbackup directory\n"
+"\n"
+" Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+" \n"
+" During the restore step, DrakBackup will remove \n"
+" your original directory and verify that all \n"
+" backup files are not corrupted. It is recommended \n"
+" you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
#, c-format
-msgid "Open Firmware Delay"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Boot device"
-msgstr "讛转拽谉 讗转讞讜诇"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Init Message"
-msgstr "诪讝讛讛 讛讜讚注讛"
+msgid "Current interface configuration"
+msgstr "讛讙讚专讜转 讛诪诪砖拽 讛谞讜讻讞讬"
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Bootloader to use"
-msgstr "诪讗转讞诇 诪注专讻转 诇砖讬诪讜砖"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader main options"
-msgstr "讛讙讚专讜转 专讗砖讬讜转 砖诇 诪讗转讞诇 讛诪注专讻转"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "讗驻砖专讜转 ''讛讙讘诇转 讗驻砖专讜讬讜转 砖讜专转 讛驻拽讜讚讛'' 诇讗 砖讬诪讜砖讬转 诇诇讗 住讬住诪讗"
+msgid "Do not print any test page"
+msgstr "讗讬谉 诇讛讚驻讬住 讗祝 讚祝 谞住讬讜谉"
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Give the ram size in MB"
-msgstr "转谉 讗转 讙讜讚诇 讛讝讻专讜谉 讘MB"
+msgid "Gurmukhi"
+msgstr ""
#: ../../any.pm:1
#, c-format
-msgid "Enable multiple profiles"
-msgstr "讛专砖讗转 诪住驻专 驻专讜驻讬诇讬诐"
+msgid "Force No APIC"
+msgstr "讻驻讛 诇诇讗 APIC"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "讝讻专讜谉 诪讚讜讬讬拽 讗诐 讚专讜砖 (谞诪爪讗讜 %d MB)"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "讛住讬住诪讗 讛讝讜 拽爪专讛 诪讬讚讬讬 (讞讬讬讘转 诇讛讻讬诇 诇驻讞讜转 %d 讗讜转讬讜转 讗讜 住讬诪谞讬诐)"
-#: ../../any.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "谞拽讛 /tmp 讘讻诇 讗转讞讜诇"
+msgid "[keyboard]"
+msgstr "[诪拽诇讚转]"
-#: ../../any.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Create a bootdisk"
-msgstr "讬爪讬专转 讚讬住拽讟 讗转讞讜诇"
+msgid "FTP proxy"
+msgstr "驻专讜拽住讬 FTP"
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "restrict"
-msgstr "讛讙讘诇讛"
+msgid "Install List"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restrict command line options"
-msgstr "讛讙讘诇转 讗驻砖专讜讬讜转 砖讜专转 讛驻拽讜讚讛"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Force No APIC"
+msgid "Show only for the selected day"
+msgstr "讛专讗讛 专拽 讗转 讛讬讜诐 讛谞讘讞专"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t \n"
+" - Create Etherboot Enabled Boot Images:\n"
+" \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+" \t\tto help manage/customize these images.\n"
+"\n"
+" - Maintain /etc/dhcpd.conf:\n"
+" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+" \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+" \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+" \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+" \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address 192.168.192.3;\n"
+"\t\t\t\t\t#type fat;\n"
+"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+" - Maintain /etc/exports:\n"
+" \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \t\tdiskless clients.\n"
+"\n"
+" \t\tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t\t/ (ro,all_squash)\n"
+" \t\t/home SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+" \t\t\n"
+" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+" \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+" \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+" \t\tfiles.\n"
+"\n"
+" - Per client system configuration files:\n"
+" \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+" \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+" \t\tbasis.\n"
+"\n"
+" - /etc/xinetd.d/tftp:\n"
+" \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+" \t\tdiskless client.\n"
+"\n"
+" \t\tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \t\tservice tftp\n"
+" \t\t(\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t\t}\n"
+" \t\t\n"
+" \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \t\tputs it's images.\n"
+"\n"
+" - Create etherboot floppies/CDs:\n"
+" \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+" \t\tor CD to initate the boot sequence. drakTermServ will help "
+"generate these images,\n"
+" \t\tbased on the NIC in the client machine.\n"
+" \t\t\n"
+" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
msgstr ""
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Enable ACPI"
-msgstr "讗讬驻砖讜专 ACPI"
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Delay before booting default image"
-msgstr "讛诪转谞讛 诇驻谞讬 讗转讞讜诇 诪注专讻转 讘专讬专转 讛诪讞讚诇"
+msgid "Logs"
+msgstr "诇讜讙讬诐"
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "compact"
-msgstr "拽讜诪驻拽讟讬"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Compact"
-msgstr "拽讜诪驻拽讟讬"
+msgid "<control>N"
+msgstr "<Ctrl>N"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Bootloader installation"
-msgstr "讛转拽谞转 诪讗转讞诇 讛诪注专讻转"
+msgid "What kind of card do you have?"
+msgstr "讗讬讝讛 住讜讙 讻专讟讬住 讬砖 诇讱?"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of boot partition"
-msgstr "住拽讟讜专 专讗砖讜谉 砖诇 诪讞讬爪转 讗转讞讜诇 讛诪注专讻转"
+msgid "<control>O"
+msgstr "<Ctrl>O"
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "住拽讟讜专 专讗砖讜谉 砖诇 讛讻讜谞谉 (MBR)"
+msgid "Security"
+msgstr "讗讘讟讞讛"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "讗讬驻讛 讘专爪讜谞讱 诇讛转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转?"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "LILO/grub Installation"
-msgstr "讛转拽谞转 LILO/grub"
+msgid "<control>Q"
+msgstr "<Ctrl>Q"
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SILO Installation"
-msgstr "讛转拽谞转 SILO"
+msgid "Unknown"
+msgstr "诇讗 讬讚讜注"
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Skip"
-msgstr "讚讬诇讜讙"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "On Floppy"
-msgstr "注诇 讛讚讬住拽讟"
+msgid "Network Configuration"
+msgstr "讛讙讚专转 讛专砖转"
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "First sector of the root partition"
-msgstr "讛诪住诇讜诇 讛专讗砖讜谉 砖诇 诪讞讬爪转 讗转讞讜诇 讛诪注专讻转"
+msgid "<control>S"
+msgstr "<Ctrl>S"
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
msgstr ""
-"讛讞诇讟转 诇讛转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转 注诇 诪讞讬爪讛.\n"
-"讝讛 专讜诪讝 砖讬砖 诇讱 讻讘专 讟讜注谉 诪注专讻转 注诇 讛讚讬住拽 讛拽砖讬讞 (诪注诇讛 诪注专讻转)\n"
-"\n"
-"讚专讱 讗讬讝讛 讻讜谞谉 讗转/讛 诪注诇讛 讗转 讛诪注专讻转? "
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating bootdisk..."
-msgstr "讬讜爪专 讚讬住拽讟 讛驻注诇转 诪注专讻转..."
+msgid "Option %s must be a number!"
+msgstr "讗驻砖专讜转 %s 讞讬讬讘转 诇讛讬讜转 诪住驻专!"
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
-msgid "Insert a floppy in %s"
-msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 讘%s"
+msgid "Notice"
+msgstr "诇砖讬诐 诇讘"
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "讬砖 诇讘讞讜专 讘讻讜谞谉 讚讬住拽讟讬诐 砖讘讜 讘专爪讜谞讱 诇讬爪讜专 讗转 讚讬住拽讟 讛讗转讞讜诇"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Second floppy drive"
-msgstr "讻讜谞谉 讚讬住拽讟讬诐 砖谞讬"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "First floppy drive"
-msgstr "讻讜谞谉 讚讬住拽讟讬诐 专讗砖讜谉"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "讗转讛 诇讗 讛讙讚专转 讗转 讛X 讛讗讬诐 讗转讛 讘讟讜讞 砖讗转讛 专讜爪讛 讗转 讝讛 ?"
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "住诇讬讞讛, 讗讬谉 讻讜谞谉 讚讬住拽讟讬诐 谞讙讬砖"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "讗讬讝讛 住讜讙 诪讬讞讜抓?"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
msgstr ""
-"讚讬住拽讟 讛讗转讞讜诇 讛诪讜转讗诐 诪住驻拽 诇讱 讚专讱 诇讛驻注讬诇 讗转 讛诇讬谞讜拽住 诇诇讗 转诇讜转 讘讟讜注谉 讛诪注专讻转 "
-"砖诇讱.\n"
-"讝讛 砖讬诪讜砖讬 讗诐 讗讬谞讱 专讜爪讛 诇讛转拽讬谉 LILO (讗讜 GRUB) 讘诪注专讻转 砖诇讱, 讗讜 砖诪注专讻转 讗讞专转 "
-"讛住讬专讛\n"
-" 讗转 LILO, 讗讜 LILO 诇讗 注讜讘讚转 注诐 讛诪注专讻转 砖诇讱. 讚讬住拽讟 讗转讞讜诇 诪讜转讗诐 讬讻讜诇 诇砖诪砖 讙诐 "
-"诇讛讬讜转\n"
-"砖讬诪讜砖讬 注诐 转诪讜谞转 讛讛爪诇讛 砖诇 诪谞讚专讬讬拽, 讜转专讙讜诐 诇诪注专讻转 诇讛转讗讜砖砖 讘拽诇讜转 诪转拽诇讜转 讗讜 "
-"砖讙讬讗讜转.\n"
-"讛讗诐 讘专爪讜谞讱 诇讬爪讜专 讚讬住拽讟 讗转讞讜诇 砖诇 讛诪注专讻转 砖诇讱?\n"
-"%s"
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "诪诪砖拽"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
+"Options Description:\n"
"\n"
+" - Backup System Files:\n"
+" \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane. To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
msgstr ""
-#: ../../any.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
msgstr ""
-"讚讬住拽讟 讛讗转讞讜诇 讛诪讜转讗诐 诪住驻拽 诇讱 讚专讱 诇讛驻注讬诇 讗转 讛诇讬谞讜拽住 诇诇讗 转诇讜转 讘讟讜注谉 讛诪注专讻转 "
-"砖诇讱.\n"
-"讝讛 砖讬诪讜砖讬 讗诐 讗讬谞讱 专讜爪讛 诇讛转拽讬谉 LILO (讗讜 GRUB) 讘诪注专讻转 砖诇讱, 讗讜 砖诪注专讻转 讗讞专转 "
-"讛住讬专讛\n"
-" 讗转 LILO, 讗讜 LILO 诇讗 注讜讘讚转 注诐 讛诪注专讻转 砖诇讱. 讚讬住拽讟 讗转讞讜诇 诪讜转讗诐 讬讻讜诇 诇砖诪砖 讙诐 "
-"诇讛讬讜转\n"
-"砖讬诪讜砖讬 注诐 转诪讜谞转 讛讛爪诇讛 砖诇 诪谞讚专讬讬拽, 讜转专讙讜诐 诇诪注专讻转 诇讛转讗讜砖砖 讘拽诇讜转 诪转拽诇讜转 讗讜 "
-"砖讙讬讗讜转.\n"
-"讗诐 讘专爪讜谞讱 诇讬爪讜专 讚讬住拽讟 讗转讞讜诇 砖诇 讛诪注专讻转 砖诇讱, 讬砖 诇讛讻谞讬住 讚讬住拽讟 诇讻讜谞谉 讜诇诇讞讜抓 "
-"\"讗讬砖讜专\"."
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "讗讬 讗驻砖专 诇讛转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转 注诇 诪讞讬爪转 %s\n"
+msgid "comma separated strings"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "not enough room in /boot"
-msgstr "讗讬谉 诪住驻讬拽 诪拽讜诐 讘/boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "讗诇讛 讛诪讞砖讘讬诐 砖诪讛诐 讛住讜专拽讬诐 讗诪讜专讬诐 诇讛讬讜转 砖诪讬砖讬诐:"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "讛'讻谞讬住讛' 讛诪住讜诪谞转 讟讟注谉 讗讜讟讜诪讟讬转 转讜讱 %d 砖谞讬讜转."
+msgid "Messages"
+msgstr "讛讜讚注讜转"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "驻拽讜讚讜转 诇驻谞讬 讻谞讬住讛 诇诪注专讻转, 讗讜 'c' 讘砖讘讬诇 砖讜专转 驻拽讜讚讛."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "诇讞抓 讗谞讟专 讻讚讬 诇讟注讜谉 讗转 讛诪注专讻转 砖谞讘讞专讛, 'e' 诇注专讬讻讛 砖诇 讛"
+msgid "POP and IMAP Server"
+msgstr "砖专转 POP 讜IMAP"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "砖讬诪讜砖 讘诪拽砖讬诐 %c 讜%c 讻讚讬 诇讘讞讜专 讗讬讝讛 '讻谞讬住讛' 转住讜诪谉."
+msgid "Mexico"
+msgstr "诪拽住讬拽讜"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "讘专讜讻讬诐 讛讘讗讬诐 诇讘讜讞专 诪注专讻转 讛讛驻注诇讛 - GRUB!"
+msgid "Model stepping"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "专讜讗谞讚讛"
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "讛讗诐 讬砖 诇讱 诪诪砖拽讬 %s 讻诇砖讛诐?"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO 注诐 转驻专讬讟 讟拽住讟"
+msgid "Switzerland"
+msgstr "砖讜讜讬祝"
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO 注诐 转驻专讬讟 讙专驻讬"
+msgid "Brunei Darussalam"
+msgstr ""
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "讗驻砖专讜讬讜转 诪讚驻住转 lpd 诪专讜讞拽转"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-"讘专讜讻讬诐 讛讘讗讬诐 诇%s 讗转 讘讜讞专 讛诪注专讻转!\n"
-"\n"
-"讬砖 诇讘讞讜专 诪注专讻转 讛驻注诇 诪讛专砖讬诪讛 讗讜\n"
-"诇讞讻讜转 %d 砖谞讬讜转 诇讛驻注诇转 讘专讬专转 诪讞讚诇.\n"
-"\n"
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "consolehelper missing"
-msgstr "注讜讝专-讛诪注讟驻转 讞住专(consolehelper)"
+msgid "Configure Internet Access..."
+msgstr ""
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "kdesu missing"
-msgstr "讞住专 kdesu"
+msgid "Norway"
+msgstr "谞讜专讘讙讬讛"
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "转诪讜谞讜转 诪住讱 讬讛讬讜 讝诪讬谞讜转 诇讗讞专 讛转拽谞讛 讘%s"
+msgid "Danish"
+msgstr ""
-#: ../../common.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "诇讗 讬讻讜诇 诇注砖讜转 转诪讜谞讜转 诪住讱 诇驻谞讬 谞讬驻讜讬 诪讞讬爪讜转"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr "讛讚诇拽 讗讜讟讜诪讟讬转 诪拽砖 numlock 讘诪注讟驻转 讜Xfree 讘讝诪谉 讛讗转讞讜诇."
-#: ../../common.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "%d seconds"
-msgstr "砖谞讬讜转 砖谞讜转专讜: %d"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
-#: ../../common.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "1 minute"
-msgstr "讚拽讛 讗讞转"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"讛转拽谞转 诇讬谞讜拽住 诪谞讚专讬讬拽 驻专讜住讛 注诇 讻诪讛 讚讬住拽讬诐. DrakX 讬讜讚注 讗诐 讞讘讬诇讛 砖谞讘讞专转 \n"
+"诪诪讜拽诪转 讘讚讬住拽 讗讞专 讜讬讜爪讬讗 讗转 讛讚讬住拽 讛谞讜讻讞讬 讜讬讘拽砖 诇讛讻谞讬住 讗讞讚 讗讞专 讻讚专讜砖."
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "%d minutes"
-msgstr "讚拽讜转 砖谞讜转专讜: %d"
+msgid "Processors"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Bulgaria"
+msgstr "讘讜诇讙专讬讛"
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "GB"
-msgstr "GB"
+msgid "No NIC selected!"
+msgstr ""
-#: ../../common.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "KB"
-msgstr "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "United States"
-msgstr "讗专爪讜转 讛讘专讬转"
+msgid "partition %s is now known as %s"
+msgstr "诪讞讬爪讛 %s 讬讚讜注讛 注讻砖讬讜 讻%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Austria"
-msgstr "讗讜住讟专讬讛"
+msgid "Backup Other files..."
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Italy"
-msgstr "讗讬讟诇讬讛"
+msgid "SMB server IP"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Netherlands"
-msgstr "讛讜诇谞讚"
+msgid "Congo (Kinshasa)"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Sweden"
-msgstr "住讜讚谉"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "砖讜诇讞谉 诪讞讬爪讜转 砖诇 讻讜谞谉 %s 注讜诪讚 诇讛讻转讘 诇讚讬住拽!"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Norway"
-msgstr "谞讜专讘讙讬讛"
+msgid "Installing HPOJ package..."
+msgstr "诪转拽讬谉 讞讘讬诇转 HPOJ..."
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Greece"
-msgstr "讬讜讜谉"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"讚讬住拽讟 讛讗转讞讜诇 讛诪讜转讗诐 诪住驻拽 诇讱 讚专讱 诇讛驻注讬诇 讗转 讛诇讬谞讜拽住 诇诇讗 转诇讜转 讘讟讜注谉 讛诪注专讻转 "
+"砖诇讱.\n"
+"讝讛 砖讬诪讜砖讬 讗诐 讗讬谞讱 专讜爪讛 诇讛转拽讬谉 LILO (讗讜 GRUB) 讘诪注专讻转 砖诇讱, 讗讜 砖诪注专讻转 讗讞专转 "
+"讛住讬专讛\n"
+" 讗转 LILO, 讗讜 LILO 诇讗 注讜讘讚转 注诐 讛诪注专讻转 砖诇讱. 讚讬住拽讟 讗转讞讜诇 诪讜转讗诐 讬讻讜诇 诇砖诪砖 讙诐 "
+"诇讛讬讜转\n"
+"砖讬诪讜砖讬 注诐 转诪讜谞转 讛讛爪诇讛 砖诇 诪谞讚专讬讬拽, 讜转专讙讜诐 诇诪注专讻转 诇讛转讗讜砖砖 讘拽诇讜转 诪转拽诇讜转 讗讜 "
+"砖讙讬讗讜转.\n"
+"讛讗诐 讘专爪讜谞讱 诇讬爪讜专 讚讬住拽讟 讗转讞讜诇 砖诇 讛诪注专讻转 砖诇讱?\n"
+"%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Germany"
-msgstr "讙专诪谞讬讛"
+msgid ", USB printer \\#%s"
+msgstr ", 诪讚驻住转 USB \\#%s"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Czech Republic"
-msgstr "讛专驻讜讘诇讬拽讛 讛爪~讻讬转"
+msgid "Latvian"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belgium"
-msgstr "讘诇讙讬讛"
+msgid "monthly"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "France"
-msgstr "爪专驻转"
+msgid "Module name"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Costa Rica"
-msgstr "拽讜住讟讛 专讬拽讛"
+msgid "Start at boot"
+msgstr "讛转讞诇 讘讗转讞讜诇"
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "砖讙讬讗讛 讘驻转讬讞转 %s 诇讻转讬讘讛 砖诇: %s"
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Nothing to do"
-msgstr "砖讜诐 讚讘专 诇注砖讜转"
+msgid "First sector of drive (MBR)"
+msgstr "住拽讟讜专 专讗砖讜谉 砖诇 讛讻讜谞谉 (MBR)"
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "讗讬谉 诪住驻讬拽 诪拽讜诐 讞讜驻砖讬 诇诪讬拽讜诐 讗讜讟讜诪讟讬"
+msgid "Joystick"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "讗住讜专 诇讛砖转诪砖 讘诪注专讻转 拽讘爪讬诐 诪拽讜讚讚转 诇谞拽讜讚转 讛讞讬讘讜专 %s"
+msgid "El Salvador"
+msgstr "讗诇 住诇讘讚讜专"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"讞讜讘讛 注诇讬讱 诪注专讻转 拽讘爪讬诐 讗诪讬转讬转 (ext2/ext3, reiserfs, xfs, or jfs) 讘砖讘讬诇 谞拽讜讚转 "
-"讛讞讬讘讜专 讛讝讜\n"
+msgid "Use Unicode by default"
+msgstr "砖讬诪讜砖 讘Unicode 讻讘专讬专转 诪讞讚诇"
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "转讬拽讬讬讛 讝讜 爪专讬讻讛 诇讛讬砖讗专 注诐 诪注专讻转 讛拽讘爪讬诐 讛专讗砖讬转 (root)."
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "讛诪讜讚讜诇 砖诇 GNU/Linux 拽专谞诇 砖诪转驻诇 讘讛转拽谉"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "讗讬谞讱 讬讻讜诇/讛 诇讛砖转诪砖 讘讻专讱 诇讜讙讬 砖诇 LVM 诇谞拽讜讚转 讞讬讘讜专 %s"
+msgid "Trying to rescue partition table"
+msgstr "诪谞住讛 诇讛爪讬诇 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "讗驻砖专讜转 %s 讞讬讬讘转 诇讛讬讜转 诪住驻专 砖诇诐!"
+
+#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "讝讜讛讬 讻讘专 诪讞讬爪讛 注诐 谞拽讜讚转 讞讬讘讜专 %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "诇讗 诪住讜讙诇 诇讛转讞讬诇 注讚讻讜谉 讞讬讬!!!\n"
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "砖诪讜转 谞拽讜讚讜转 讞讬讘讜专 爪专讬讻讬诐 诇讛讻讬诇 专拽 讗讜转讬讜转, 诪住驻专讬诐 讜拽讜 转讞转讜谉"
+msgid "Name: "
+msgstr "砖诐:"
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "谞拽讜讚讜转 讞讬讘讜专 讞讬讬讘讜转 诇讛转讞讬诇 讘住诇讗砖(/)"
+msgid "16 million colors (24 bits)"
+msgstr "16 诪诇讬讜谉 爪讘注讬诐 (24 讘讬讟)"
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "讗住讜专 诇讛砖转诪砖 讘ReiserFS 诇诪讞讬爪讛 拽讟谞讛 诪32MB"
+msgid "Allow all users"
+msgstr "讛专砖讛 诇讻诇 讛诪砖转诪砖讬诐"
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "讗讬谞讱 讬讻讜诇 诇讛砖转诪砖 讘JFS 讘砖讘讬诇 诪讞讬爪讛 拽讟谞讛 诪16 诪讙讛"
+msgid "The official MandrakeSoft Store"
+msgstr "讛讞谞讜转 讛专砖诪讬转 砖诇 MandrakeSoft "
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "诪砖谞讛 讙讜讚诇"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "讞讬讘讜专 讻讘诇讬诐"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "诪砖转诪砖"
#: ../../fsedit.pm:1
#, c-format
@@ -969,770 +1497,247 @@ msgstr ""
"\n"
"讛诐 讗转/讛 诪住讻讬诪/讛 诇讗讘讚 讗转 讻诇 讛诪讞讬爪讜转?\n"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Error"
-msgstr "砖讙讬讗讛"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "server"
-msgstr "砖专转"
+msgid "Printer on parallel port \\#%s"
+msgstr ""
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "with /usr"
-msgstr "注诐 /usr"
+msgid "Name"
+msgstr "砖诐"
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
#, c-format
-msgid "simple"
-msgstr "驻砖讜讟"
+msgid "mkraid failed"
+msgstr "谞讻砖诇 mkraid"
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Enabling swap partition %s"
-msgstr "诪讗驻砖专 诪讞讬爪转 讝讬讻专讜谉 讜讬专讟讜讗诇讬 %s"
+msgid "Button 3 Emulation"
+msgstr "讛讚诪讬讬转 讻驻转讜专 砖诇讬砖讬"
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "砖讙讬讗讛 讘谞讬转讜拽 %s: %s"
+msgid "Sending files..."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "讞讬讘讜专 讛诪讞讬爪讛 %s 诇转讬拽讬讬讛 %s 谞讻砖诇"
+msgid "Israeli (Phonetic)"
+msgstr "注讘专讬转 (Phonetic)"
-#: ../../fs.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mounting partition %s"
-msgstr "诪讞讘专 诪讞讬爪讛 - %s"
+msgid "access to rpm tools"
+msgstr "讻谞讬住讛 诇讻诇讬 rpm"
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Checking %s"
-msgstr "讘讜讚拽 %s"
+msgid "edit"
+msgstr "诇注专讜讱"
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Formatting partition %s"
-msgstr "诪驻专诪讟 诪讞讬爪讛 - %s"
+msgid "You must choose/enter a printer/device!"
+msgstr ""
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "讬讜爪专 讜诪驻专诪讟 讗转 讛拽讜讘抓 %s"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "诇讗 讬讚讜注 诇讬 讗讬讱 诇驻专诪讟 讗转 %s 诪住讜讙 %s"
+msgid "Phone number"
+msgstr "诪住驻专 讟诇驻讜谉"
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "驻讬专诪讜讟 %s 砖诇 %s 谞讻砖诇"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"诇讞爪/讬 讗讬砖讜专 讗诐 讘专爪讜谞讱 诇讗讘讚 讗转 讻诇 讛诪讞讬爪讜转 讜讛诪讬讚注 注诇 讻讜谞谉 拽砖讬讞 讝讛.\n"
-"讝讛讬专讜转: 讗讞专讬 诇讞讬爪讛 注诇 \"讗讬砖讜专\" 讗讬谉 讚专讱 诇砖讞讝专 讗转 讛诪讞讬爪讜转 讜讛诪讬讚注\n"
-"讛诪讜驻讬注讬诐 讘讻讜谞谉 拽砖讬讞 讝讛, 讻讜诇诇 讻诇 诪讬讚注 \"讞诇讜谞讜转\".\n"
-"\n"
-"谞讗 诇诇讞讜抓 注诇 \"讞讝专讛\" 诇注爪讬专转 转讛诇讬讱 讝讛 诇诇讗 讛驻住讚转 讻诇 诪讬讚注 讜诪讞讬爪讜转 拽讬讬诪讬诐."
+msgid "Printer name, description, location"
+msgstr "砖诐 诪讚驻住转, 转讬讗讜专, 诪讬拽讜诐"
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "USA (broadcast)"
msgstr ""
-"讘讞专 讻讜谞谉 拽砖讬讞 砖讘专爪讜谞讱 诇诪讞讜拽 讻讚讬 诇讛转拽讬谉 讗转 诪讞讬爪转 诇讬谞讜拽住 诪谞讚专讬讬拽 讛讞讚砖讛\n"
-"讝讛讬专讜转: 讻诇 讛诪讬讚注 讛讻诇讜诇 讛讻讜谞谉 讛拽砖讬讞 讬诪讞拽 讜诇讗 讬谞转谉 诇砖讞讝讜专!"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
msgstr ""
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+msgid "Use Xinerama extension"
msgstr ""
-"\"讻专讟讬住 拽讜诇\": 讗诐 讻专讟讬住 拽讜诇 诪讜讝讛讛 讘诪注专讻转 砖诇讱, 讝讛 诪讜爪讙 讻讗谉.\n"
-"讗诐 砖诪转 诇讘 砖讛讻专讟讬住 讛拽讜诇 砖诪讜爪讙 讗讬谞讜 讻专讟讬住 讛拽讜诇 砖诇讱, 讘讗驻砖专讜转讱,\n"
-"诇诇诇讞讜抓 注诇 讛讻驻转讜专 讜诇讘讞讜专 诪谞讛诇-讛转拽谉 讗讞专."
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Loopback"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+msgid "West Europe"
msgstr ""
-"讘转讞讬诇讛 讬讘讜爪注 讝讬讛讜讬 讛转拽谞讬 IDE 砖讘诪讞砖讘讱 注诇 讬讚讬 DrakX 砖讙诐 讬住专讜拽 讗讞专 讗讞讚 讗讜\n"
-" 讬讜转专 讻专讟讬住讬 PCI SCSI 讘诪注专讻转 砖诇讱. 讗诐 讻专讟讬住 SCSI 谞诪爪讗, DrakX 讬转拽讬谉 诪谞讛诇 讛转拽谉\n"
-" 诪转讗讬诐 讘讗讜驻谉 讗讜讟讜诪讟讬.\n"
-" \n"
-" \n"
-" 讘讙诇诇 砖讝讬讛讜讬 讛讞讜诪专讛 讛讗讜讟讜诪讟讬 讗讬谞讜 诪讜讘讟讞, DrakX 注诇讜诇 诇讛讬讻砖诇 讘讝讬讛讜讬 讛讻讜谞谞讬诐 "
-"讛拽砖讬讞讬诐\n"
-" 讛诪讜转拽谞讬诐 讘诪讞砖讘讱. 讘诪拽专讛 砖讻讝讛 讬讛讬讛 注诇讬讱 诇讛讙讚讬专 讗转 讛讞讜诪专讛 砖讘专砖讜转讱 讘讗讜驻谉 讬讚谞讬.\n"
-" \n"
-" \n"
-" 讗诐 讛讬讛 注诇讬讱 诇讛讙讚讬专 诪转讗诐 PC SCSI 讘讗讜驻谉 讬讚谞讬, DraxX 讬砖讗诇 讗诐 讘专爪讜谞讱 诇注讚讻谉 讗转\n"
-" 讛讛讙讚专讜转 注讘讜专讜. 注诇讬讱 诇讗驻砖专 诇 DrakX 诇住专讜拽 讗转 讛讞讜诪专讛 讗讞专 讛讙讚专讜转 讬讬讞讜讚讬讜转 "
-"诇讻专讟讬住\n"
-" 讗砖专 讚专讜砖讜转 诇讗讬转讞讜诇 讛诪转讗诐. 讘专讜讘 讛诪拽专讬诐 DrakX 讬爪诇讬讞 诇讛砖诇讬诐 砖诇讘 讝讛 诇诇讗 讘注讬讜转\n"
-" 诪讬讜讞讚讜转.\n"
-" \n"
-" \n"
-" 讗诐 DrakX 谞讻砖诇 讘讗讬转讜专 讛讗讜讟讜诪讟讬 砖诇 讛驻专诪讟专讬诐 讛谞讚专砖讬诐 注讘讜专 讛讞讜诪专讛, 讬讛讬讛 注诇讬讱\n"
-" 诇讛讙讚讬专 讗转 诪谞讛诇 讛讛转拽谞讬诐 讘注爪诪讱."
-#: ../../help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - 讛爪讙 讛讜讚注转 注讝专讛 讝讜\n"
+" --report - 讛转讜讻谞讛 爪专讬讻讛 诇讛讬讜转 讗讞讚 诪讻诇讬 诪谞讚专讬讬拽\n"
+" --incident - 讛转讜讻谞讛 爪专讬讻讛 诇讛讬讜转 讗讞讚 诪讻诇讬 诪谞讚专讬讬拽"
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "讙讬专住讗转 讞讜诪专讚专讬讬拽2 %s"
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
+msgid "Copying %s"
+msgstr "诪注转讬拽 %s"
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "讬砖 诇讘讞讜专 爪讘注"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "讛专驻讜讘诇讬拽讛 讛讚讜诪讬谞讬拽谞讬转"
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"谞讗 诇讘讞讜专 讗转 讛驻讜专讟 讛谞讻讜谉. 诇讚讜讙诪讗, 驻讜专讟 \"COM1\" 转讞转 讞诇讜谞讜转 谞拽专讗 \"ttyS0\"\n"
-"转讞转 讙谞讜/诇讬谞讜拽住."
+msgid "Swaziland"
+msgstr "住讜讜讝讬诇谞讚"
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid "Set-UID"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid "Please check if you are using CDRW media"
msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
msgstr ""
+"讘讞专 讗转 讛讚讬住拽 讛拽砖讬讞 砖讗转讛 专讜爪讛 诇诪讞讜拽 注诇 诪谞转 诇讛转拽讬谉 讗转 \n"
+"诇讬谞讜拽住 诪谞讚专讬讬拽 讝讛讬专讜转 ! 讻讜诇 讛诪讬讚注 砖谞讬诪爪注 注诇 讛诪讞讬爪讛 \n"
+"讬诪讞拽 讜诇讗 转讛讬讗 讗驻砖专讜转 诇砖讞讝专 讗讜转讜 !!"
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid " on parallel port \\#%s"
+msgstr "注诇 驻讜专讟 驻专诇讗诇讬 \\#%s"
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "砖讬诪讜砖 讘诪拽砖讬诐 %c 讜%c 讻讚讬 诇讘讞讜专 讗讬讝讛 '讻谞讬住讛' 转住讜诪谉."
-#: ../../help.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "注讻讘专 讻诇诇讬 注诐 2 诪拽砖讬诐"
-#: ../../help.pm:1
+#: ../../lvm.pm:1
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+msgid "Remove the logical volumes first\n"
msgstr ""
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "讛'讻谞讬住讛' 讛诪住讜诪谞转 讟讟注谉 讗讜讟讜诪讟讬转 转讜讱 %d 砖谞讬讜转."
+
+#: ../../standalone/drakboot:1
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
msgstr ""
+"诇讗 讬讻讜诇 诇专砖讜诐 诇/etc/sysconfig/bootsplash\n"
+"讛拽讜讘抓 诇讗 拽讬讬诐."
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Internet access"
msgstr ""
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
msgstr ""
+"讻讚讬 诇讚注转 注诇 讛讗驻砖专讜讬讜转 讛讟诪讜谞讜转 讘诪讚驻住转 砖诇讱 讬砖 诇拽专讜讗 讗转 讛专砖讬诪讛 砖讻讗谉 讗讜 诇诇讞讜抓 注诇 "
+"讻驻转讜专 \"专砖讬诪转 讗驻砖专讜讬讜转 讛讚驻住讛\". "
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "诪讗驻砖专 砖专转讬诐..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "诪讚驻讬住 讚驻讬 谞住讬讜谉..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "讝讜讛讬 讻讘专 诪讞讬爪讛 注诐 谞拽讜讚转 讞讬讘讜专 %s\n"
#: ../../help.pm:1
#, c-format
@@ -1753,222 +1758,164 @@ msgid ""
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"诇讘住讜祝, 转讬砖讗诇/讬 讗诐 讘专爪讜谞讱 诇专讗讜转 讗转 讛诪诪砖拽 讛讙专驻讬 讻砖讛诪注专讻转 转注诇讛.\n"
-"讬砖 诇砖讬诐 诇讘 砖砖讗诇讛 讝讜 转讬砖讗诇 讗驻讬诇讜 讗诐 讘讞专转 诇讗 诇讘讚讜拽 讗转 讛讛讙讚专讜转.\n"
-"讘专讜专 砖讛转砖讜讘讛 转讛讬讛 \"诇讗\" 讗诐 讛诪讞砖讘 砖诇讱 爪专讬讱 诇专讜抓 讻砖专转, 讗讜 讗诐\n"
-"诇讗 讛爪诇讞转 诇讛讙讚讬专 讗转 讛转爪讜讙讛 讻专讗讜讬."
+msgid "Ukraine"
+msgstr "讗讜拽专讗讬谞讛"
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "Application:"
msgstr ""
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "诪讜讚诐 ISDN 讞讬爪讜谞讬"
-#: ../../help.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "讛讘讞讬专讛 砖诇讱? ( 讘专讬专转 诪讞讚诇 %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "驻转讬专转 讘注讬讜转"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr " / 讗讝讜专"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
"\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
-" You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Graphic Card\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
"\n"
-" The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+msgstr ""
+"讚驻讬 讛谞住讬讜谉 谞砖诇讞讜 诇讛讚驻住讛.\n"
+"讬讻讜诇 诇讛讬讜转 砖讬讬拽讞 讻诪讛 讝诪谉 注讚 砖讛诪讚驻住转 转转讞讬诇 讘讛讚驻住讛.\n"
+"诪爪讘 讛讛讚驻住讛:\n"
+"%s\n"
"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "daily"
msgstr ""
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "and one unknown printer"
msgstr ""
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "Ireland"
+msgstr "讗讬专诇谞讚"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "讙讬专住转 讙专注讬谉"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Restore Configuration "
msgstr ""
-#: ../../help.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+msgid "Is this the correct setting?"
msgstr ""
#: ../../help.pm:1
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -1983,6040 +1930,6016 @@ msgid ""
"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Wizard Configuration"
msgstr ""
-#: ../../help.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"讛转拽谞转 诇讬谞讜拽住 诪谞讚专讬讬拽 驻专讜住讛 注诇 讻诪讛 讚讬住拽讬诐. DrakX 讬讜讚注 讗诐 讞讘讬诇讛 砖谞讘讞专转 \n"
-"诪诪讜拽诪转 讘讚讬住拽 讗讞专 讜讬讜爪讬讗 讗转 讛讚讬住拽 讛谞讜讻讞讬 讜讬讘拽砖 诇讛讻谞讬住 讗讞讚 讗讞专 讻讚专讜砖."
+msgid "Autoprobe"
+msgstr "讞讬驻讜砖 讗讜讟讜诪讟讬"
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
+msgid "Backup system files..."
msgstr ""
-#: ../../help.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
+msgid "Can't use broadcast with no NIS domain"
+msgstr "讗谞讬 诇讗 讬讻讜诇 诇讛砖转诪砖 讘砖讬讚讜专 诪转驻专抓 诇诇讗 讚讜诪讬谉 砖诇 NIS"
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+msgid "Removing printer \"%s\"..."
+msgstr "诪住讬专 讗转 诪讚驻住转 \"%s\"..."
-#: ../../install2.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "You must also format %s"
-msgstr "讞讜讘讛 注诇讬讱 诇驻专诪讟 讙诐 讗转 %s"
+msgid "drakfloppy"
+msgstr "讚专拽讚讬住拽讟"
-#: ../../install2.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
msgstr ""
-#: ../../install_any.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "information level that can be obtained through the cpuid instruction"
msgstr ""
-"砖讙讬讗讛 讛转专讞砖讛 - 诇讗 谞诪爪讗讛 讞讜诪专讛 诇讬爪讬专转 诪注专讻转 拽讘爪讬诐 讞讚砖讛. 谞讗 诇讘讚讜拽 讗转 讛讞讜诪专讛 "
-"砖讙专诪讛 诇讘注讬讛"
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Error reading file %s"
-msgstr "砖讙讬讗讛 讘拽专讬讗转 讛拽讜讘抓 %s"
+msgid "Peru"
+msgstr "驻专讜"
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid " on device: %s"
msgstr ""
-"讻讚讬 诇讛砖转诪砖 讘讘讞讬专转 讛讞讘讬诇讜转 讛砖诪讜专讛, 讬砖 诇讛驻注讬诇 讗转 讛讛转拽谞讛 注诐 ``linux "
-"defcfg=floppy'' "
-#: ../../install_any.pm:1
-#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "讚讬住拽讟 讝讛 讗讬谞讜 诪驻讜专诪讟 FAT"
-
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "讛讻谞住 讚讬住拽讟 诪驻讜专诪讟 FAT 诇讻讜谞谉 %s"
+msgid "Remove Windows(TM)"
+msgstr "讛住专 讗转 讞诇讜谞讜转(TM)"
-#: ../../install_any.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "诪转讞讬诇 讗转 砖专转 讛驻讜谞讟讬诐 砖诇 (讝讛 讚讘专 讘住讬住讬 诇Xfree 讻讚讬 诇专讜抓)"
-#: ../../install_any.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
msgstr ""
-"讛讞讘讬诇讜转 讛讘讗讜转 讬讜住专讜 讻讚讬 诇讗驻砖专 讗转 注讚讻讜谉 讛诪注专讻转: %s\n"
-"\n"
-"\n"
-"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讛住讬专 讞讘讬诇讜转 讗诇讛?\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "诇讗"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Yes"
-msgstr "讻谉"
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "Select the font file or directory and click on 'Add'"
msgstr ""
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "讛讙讚专转 讛诪注专讻转"
-
-#: ../../install_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "System installation"
-msgstr "讛转拽谞转 讛诪注专讻转"
+msgid "Madagascar"
+msgstr "诪讚讙住拽专"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Bringing down the network"
-msgstr "住讜讙专 讗转 讛专砖转"
+msgid "Urpmi"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bringing up the network"
-msgstr "诪注诇讛 讗转 讛专砖转"
+msgid "Cron not available yet as non-root"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "诪讬讞讜抓 谞讻砖诇: %s"
+msgid "System"
+msgstr "诪注专讻转"
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "讗砖祝 讛诪讬讞讜抓 砖诇 DrakX 诪爪讗 讗转 讛驻转专讜谞讜转 讛讘讗讬诐:"
+msgid "Do you want to use this feature?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘讝讛 讘注转讬讚?"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "I can't find any room for installing"
-msgstr "讗讬谞讬 诪讜爪讗 诪拽讜诐 诇讛转拽谞讛"
+msgid "Arabic"
+msgstr "注专讘讬转"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"\n"
+"- Options:\n"
msgstr ""
-"讘讗驻砖专讜转讱 讻专讙注 诇诪讞抓 讗转 %s.\n"
-"讻讗砖专 住讬讬诪转, 诇讗 诇砖讻讜讞 诇砖诪讜专 注诐 `w'"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use fdisk"
-msgstr "讛砖转诪砖 讘fdisk"
+msgid "Password required"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Custom disk partitioning"
-msgstr "讛转讗诪讛 讗讬砖讬转 砖诇 诪讬讞讜抓 讛讚讬住拽"
+msgid "%d minutes"
+msgstr "讚拽讜转 砖谞讜转专讜: %d"
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "讻诇 讛诪讞讬爪讜转 讛拽讬讬诪讜转 讜讛诪讬讚注 讘讛谉 讬讗讘讚讜 讘讚讬住拽 %s"
+msgid "Graphics card: %s"
+msgstr "讻专讟讬住 诪住讱: %s"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "讬砖 诇讱 讬讜转专 诪讻讜谞谉 拽砖讬讞 讗讞讚, 讘讗讬讝讛 讘专爪讜谞讱 诇讛转拽讬谉 诇讬谞讜拽住?"
+msgid "WebDAV transfer failed!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Erase entire disk"
-msgstr "诪讞讬拽转 讻诇 讛讚讬住拽"
+msgid "XFree configuration"
+msgstr "讛讙讚专讜转 XFree"
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "讛住专 讗转 讞诇讜谞讜转(TM)"
+msgid "Choose action"
+msgstr "讬砖 诇讘讞讜专 驻注讜诇讛"
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "讗讬谉 诪讞讬爪转 FAT 诇砖讬谞讜讬 讙讜讚诇 讗讜 诇砖讬诪讜砖 讻loopback - 诇讗 诪住驻讬拽 诪拽讜诐 谞讜转专"
+msgid "French Polynesia"
+msgstr "驻讜诇讬谞讝讬讛 讛爪指专职驻指转执讬转"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
msgstr ""
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "砖讬谞讜讬 讙讜讚诇 诇FAT 谞讻砖诇: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "诪砖谞讛 讙讜讚诇 诇诪讞讬爪转 讞诇讜谞讜转"
-
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Resizing"
-msgstr "诪砖谞讛 讙讜讚诇"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "partition %s"
-msgstr "诪讞讬爪转 %s"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "讛专抓 讗转 诪注专讻转 拽讜诇 ALSA (讗专讻讬讟拽讟讜专转 拽讜诇 诪转拽讚诪转 诇诇讬谞讜拽住)"
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "讗讬讝讛 讙讜讚诇 讘专爪讜谞讱 诇讛砖讗讬专 诇讞诇讜谞讜转 讘-"
+msgid "Installing driver for %s card %s"
+msgstr "诪转拽讬谉 诪谞讛诇 讛转拽谉 诇讻专讟讬住 %s %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+msgid "Enable Server"
msgstr ""
-"诪讞讬爪转 讞诇讜谞讜转 讗讬谞讛 诪讗讜讞讛. 谞讗 诇讛驻注讬诇 诪讞讚砖 讗转 讛诪讞砖讘 讜诇讛专讬抓 讗讬讞讜讬 讚讬住拽, 诇讗讞专 诪讻谉 "
-"讬砖 诇讛驻注讬诇 诪讞讚砖 讗转 讛转拽谞转 诇讬谞讜拽住 诪谞讚专讬讬拽"
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "砖讬诪讜砖 讘砖讟讞 讛讞讜驻砖讬 注诇 诪讞讬爪转 讞诇讜谞讜转"
+msgid "Ukrainian"
+msgstr "讗讜拽专讬讬谞讬转"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"诪砖谞讛 讙讜讚诇 讛FAT 讗讬谞讜 诪住讜讙诇 诇讛转诪讜讚讚 注诐 讛诪讞讬爪讛 砖诇讱,\n"
-" 讛砖讙讬讗讛 讛讘讗讛 讛转专讞砖讛: %s"
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "诇讗讬讝讜 诪讞讬爪讛 讘专爪讜谞讱 诇砖谞讜转 讙讜讚诇?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "谞讗 诇讛讻谞讬住 讗转 讚讬住拽讟 讛讗转讞讜诇 讛诪砖讜诪砖 讘讻讜谞谉 %s"
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "讛砖转诪砖 讘砖讟讞 讛讞讜驻砖讬 注诇 诪讞讬爪转 讞诇讜谞讜转"
+msgid "Local network(s)"
+msgstr "专砖转/讜转 诪拽讜诪讬讜转"
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "讗讬谉 诪讞讬爪转 FAT 诇砖讬谞讜讬 讙讜讚诇 讗讜 诇砖讬诪讜砖 讻loopback - 诇讗 诪住驻讬拽 诪拽讜诐 谞讜转专"
+msgid "Remove Windows"
+msgstr "讛住专 讗转 讛讞诇讜谞讜转"
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "讙讜讚诇 诪讞讬爪转 讝讻专讜谉 讜讬专讟讜讗诇讬 讘MB:"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"讛 %s 砖诇讱 讛讜讙讚专.\n"
+"注讻砖讬讜 讘讗驻砖专讜转讱 诇住专讜拽 诪住讻讬诐 讘注讝专转 \"XSane\" 诪-诪讜诇讟诪讬讚讛/讙专驻讬拽讛 讘转驻专讬讟 讛转讜讻谞讜转."
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Root partition size in MB: "
-msgstr "讙讜讚诇 诪讞讬爪讛 专讗砖讬转 讘MB:"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Choose the sizes"
-msgstr "讘讞专 讗转 讛讙讚诇讬诐"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "讘讗讬讝讜 诪讞讬爪讛 讘专爪讜谞讱 诇讛转砖转诪砖 讘砖讘讬诇 Linux4Win?"
+msgid "System mode"
+msgstr "诪爪讘 诪注专讻转"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "砖讬诪讜砖 讘诪讞讬爪转 讞诇讜谞讜转 诇loopback"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "There is no existing partition to use"
-msgstr "讗讬谉 诪讞讬爪讛 拽讬讬诪转 诇砖讬诪讜砖"
+msgid "Netmask:"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Use existing partitions"
-msgstr "砖讬诪讜砖 讘诪讞讬爪讛 拽讬讬诪转"
+msgid "Append"
+msgstr "讛讜住驻讛"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "讗讬谉 诪住驻讬拽 诪拽讜诐 驻谞讜讬 诇诪拽诐 讗转 讛诪讞讬爪讜转 讛讞讚砖讜转"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "专讬注谞讜谉 专砖讬诪转 诪讚驻住讜转 (讻讚讬 诇讛爪讬讙 讗转 讻诇 诪讚驻住讜转 讛CUPS 讛诪专讜讞拽讜转 讛讝诪讬谞讜转)"
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use free space"
-msgstr "砖讬诪讜砖 讘砖讟讞 讛讞讜驻砖讬"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "FAT"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You don't have a swap partition.\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
"\n"
-"Continue anyway?"
-msgstr "讗讬谉 诇讱 诪讞讬爪转 讝讻专讜谉 讜讬专讟讜讗诇讬"
+"You may prefer to replay the installation.\n"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+msgid "Network printer \"%s\", port %s"
msgstr ""
-"讞讜讘讛 注诇讬讱 转讬拽讬讬讛 专讗砖讬转.\n"
-"讘砖讘讬诇 讻讱 讬砖 诇讬爪讜专 诪讞讬爪讛 讗讜 诇诇讞讜抓 注诇 诪讞讬爪讛 拽讬讬诪转.\n"
-"讗讝 讬砖 诇讛驻注讬诇 ''谞拽讜讚转 讞讬讘讜专'' 讜诇讛讙讚讬专 讝讗转 诇/"
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
msgstr ""
-"讞诇拽 诪讛讞讜诪专讛 注诇 讛诪讞砖讘 砖诇讱 爪专讬讻讛 诪谞讛诇讬 讛转拽谉 ''诪转讗讬诪讬诐'' 讻讚讬 诇驻注讜诇.\n"
-"讗驻砖专 诇诪爪讜讗 诪讬讚注 注诇讬讛诐 讘%s"
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+msgid "OK to restore the other files."
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+msgid "Please choose your keyboard layout."
+msgstr "谞讗 诇讘讞讜专 讗转 驻诇讟 讛诪拽诇讚转 砖诇讱."
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "Printer Device URI"
msgstr ""
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgid "Not erasable media!"
msgstr ""
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "谞讻谞住 诇砖诇讘 `%s'\n"
+msgid "Terminal-based"
+msgstr "诪讘讜住住-诪注讟驻转"
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Help"
-msgstr "注讝专讛"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "not configured"
-msgstr "诇讗 诪讜讙讚专"
+msgid "The user name is too long"
+msgstr "砖诐 讛诪砖转诪砖 讗专讜讱 诪讬讚讬讬"
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure"
-msgstr "讛讙讚专讜转"
+msgid "Other OS (windows...)"
+msgstr "诪注专讻转 讛驻注诇讛 讗讞专转(windows...)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Go on anyway?"
-msgstr "诇讛诪砖讬讱 讘讻诇 诪拽专讛?"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "There was an error installing packages:"
-msgstr "讛转专讞砖讛 砖讙讬讗讛 讘讛转拽谞转 讛讞讘讬诇讜转:"
+msgid "Reading printer database..."
+msgstr "拽讜专讗 讗转 诪讗讙专 讛谞转讜谞讬诐 砖诇 讛诪讚驻住转..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "讛转专讞砖讛 砖讙讬讗讛 讘拽专讬讗讛 诇讞讘讬诇讜转 (讗讜 住讬讚讜专 讞讘讬诇讜转):"
+msgid "Generate auto install floppy"
+msgstr "讘谞讛 讚讬住拽讟 讛驻注诇讛 讗讜讟讜诪讟讬转"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
msgstr ""
-"谞讗 诇讛讞诇讬祝 讚讬住拽!\n"
-"\n"
-"谞讗 诇讛讻谞讬住 讗转 讛讚讬住拽 讛谞拽专讗 \"%s\" 诇讻讜谞谉 讜诇诇讞讜抓 讗讬砖讜专 讻讗砖专 住讬讬诪转.\n"
-"讗诐 讗讬谉 诇讱 讗讜转讜 讬砖 诇诇讞讜抓 讘讬讟讜诇 诇讛转拽谞讛 转讜讱 讛转注诇诪讜转 诪讚讬住拽 讝讛."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refuse"
-msgstr "住专讘"
+msgid "Somalia"
+msgstr "住讜诪诇讬讛"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Accept"
-msgstr "拽讘诇"
+msgid "No open source driver"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Installing package %s"
-msgstr "%s - 诪转拽讬谉 讞讘讬诇讛 "
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"讝讛 讚讜诪讛 诇砖诇讘 讛拽讜讚诐, 讗讱 讛诪注专讻转 住讙讜专讛 诇讙诪专讬 讜讗驻砖专讜讬讜转 讛讗讘讟讞讛 讘诪爪讘 诪拽住讬诪诇讬."
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "%d packages"
-msgstr "%d 讞讘讬诇讜转"
+msgid "Nicaragua"
+msgstr "谞讬拽讗专讗讙讜讗讛"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No details"
-msgstr "讗讬谉 驻专讟讬诐"
+msgid "New Caledonia"
+msgstr "拽诇讚讜谞讬讛 讛讞讚砖讛"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Details"
-msgstr "驻专讟讬诐"
+msgid "European protocol (EDSS1)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "讗谞讗 讛诪转谉, 诪讻讬谉 讗转 讛讛转拽谞讛..."
+msgid "Video mode"
+msgstr "诪爪讘 转爪讜讙讛"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Time remaining "
-msgstr "讝诪谉 谞讜转专"
+msgid "Please enter your email address below "
+msgstr "谞讗 诇讛讻谞讬住 讗转 讻转讜讘转 讛讚讜讗诇 讻讗谉"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Estimating"
-msgstr "谞讜转专讜"
+msgid "Oman"
+msgstr "注讜诪谉"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Installing"
-msgstr "诪转拽讬谉"
+msgid "Network Monitoring"
+msgstr "转爪讜讙转 诪爪讘 专砖转"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "讘讞专 讗转 讛讞讘讬诇讜转 砖讘专爪讜谞讱 诇讛转拽讬谉"
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Minimal install"
-msgstr "讛转拽谞讛 诪讬谞讬诪诇讬转"
+msgid "New size in MB: "
+msgstr "讙讜讚诇 讞讚砖 讘MB:"
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Updating package selection"
-msgstr "讘讞讬专转 注讚讻讜谉 讞讘讬诇讜转"
+msgid "Partition table type: %s\n"
+msgstr "住讜讙 砖讜诇讞谉 讛诪讞讬爪讜转: %s\n"
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Load/Save on floppy"
-msgstr "讟注谉 讗讜 砖诪讜专 讘讚讬住拽讟"
+msgid "Authentication Windows Domain"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<- Previous"
-msgstr "拽讜讚诐 ->"
+msgid "US keyboard"
+msgstr "诪拽诇讚转 讗专讛\"讘"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Install"
-msgstr "讛转拽谞讛"
+msgid "Buttons emulation"
+msgstr "讛讚诪讬讬转 讻驻转讜专讬诐"
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Show automatically selected packages"
-msgstr "讛专讗讛 讞讘讬诇讜转 砖谞讘讞专讜 讗讜讟讜诪讟讬转"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "讗讬 讗驻砖专 诇讘讟诇 讗转 讘讞讬专转 讞讘讬诇讛 讝讜, 砖讬讚专讜讙讛 讞讜讘讛"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-"讞讜讘讛 诇砖讚专讙 讞讘讬诇讛 讝讜.\n"
-"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讘讟诇 讗转 讘讞讬专转讛?"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "讗讬谉 讗驻砖专讜转 诇讘讟诇 讞讘讬诇讛 讝讜 诪讻讬讜讜谉 砖讛讬讗 讻讘专 诪讜转拽谞转"
+msgid "Sending Speed:"
+msgstr "诪讛讬专讜转 砖诇讬讞讛:"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "讝讜讛讬 讞讘讬诇讛 讘住讬住讬转, 讗讬 讗驻砖专 诇讘讟诇 讗转 讘讞讬专转讛"
+msgid "Halt bug"
+msgstr "讘讗讙 转拽讬注讛"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You can't select/unselect this package"
-msgstr "讗讬 讗驻砖专 诇讘讞讜专/诇讘讟诇 讗转 讞讘讬诇讛 讝讜"
+msgid "Mail alert configuration"
+msgstr "讘讙讚专讜转 讛转专讗讜转 讚讜讗诇"
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "注讜诪讚 诇讛住讬专 讗转 讛讞讘讬诇讜转 讛讘讗讜转"
+msgid "Tokelau"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "注讜诪讚 诇讛转拽讬谉 讗转 讛讞讘讬诇讜转 讛讘讗讜转"
+msgid "Bosnian"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "讗讬 讗驻砖专 诇讘讞讜专 讘讞讘讬诇讛 讝讜 诪讻讬讜讜谉 砖诇讗 谞讜转专 诪住驻讬拽 诪拽讜诐 驻谞讜讬 诇讛转拽讬谞讛"
+msgid "Release: "
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Importance: %s\n"
-msgstr "讞砖讬讘讜转/注专讱: %s\n"
+msgid "Connection speed"
+msgstr "诪讛讬专讜转 讞讬讘讜专"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Size: %d KB\n"
-msgstr "讙讜讚诇: %d KB\n"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Version: %s\n"
-msgstr "讙讬专住讛: %s\n"
+msgid "Namibia"
+msgstr "谞诪讬讘讬讛"
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Name: %s\n"
-msgstr "砖诐: %s\n"
+msgid "Database Server"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bad package"
-msgstr "讞讘讬诇讛 驻讙讜诪讛"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../raid.pm:1
#, c-format
-msgid "Other"
-msgstr "讗讞专"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "讙讜讚诇 讻诇诇讬: %d / %d MB"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 专拽 注诐 XFree %s. \n"
+"讝讛讬专讜转: 讝讜讛讬 讙讬专住讛 谞住讬讜谞讬转 讛注诇讜诇讛 诇转拽讜注 诇讱 讗转 讛诪讞砖讘.\n"
+"讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 讚讜 诪讬诪讚 注诐 XFree %s. "
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Next ->"
-msgstr "<- 讛讘讗"
+msgid "Please wait, setting security options..."
+msgstr "谞讗 诇讛诪转讬谉, 诪讙讚讬专 讗驻砖专讜讬讜转 讗讘讟讞讛..."
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Individual package selection"
-msgstr "讘讞讬专转 讞讘讬诇讜转 讘讗讜驻谉 住驻爪讬驻讬"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Package Group Selection"
-msgstr "讘讞讬专讛 砖诇 拽讘讜爪转 讞讘讬诇讜转"
+msgid "Launch the graphical environment when your system starts"
+msgstr "讛驻注诇 讗转 讛住讘讬讘讛 讛讙专驻讬转 讻讗砖专 讛诪注专讻转 砖诇讱 诪转讞讬诇讛"
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "hourly"
msgstr ""
-"讛诪注专讻转 砖诇讱 讘注诇转 诪砖讗讘讬诐 谞诪讜讻讬诐. 讗讜诇讬 讬讛讬讜 诇讱 讻诪讛 讘注讬讜转 诇讛转拽讬谉\n"
-"讗转 诇讬谞讜拽住 诪谞讚专讬讬拽. 讗诐 讝讛 拽讜专讛, 讗转/讛 讬讻讜诇/讛 诇讛转拽讬谉 讚专讱 诪诪砖拽 讟拽住讟 讘诪拽讜诐. 讘砖讘讬诇 "
-"讻讱 讬砖 诇诇讞讜抓 F1 讻讗砖专 诪驻注讬诇讬诐 讻谞讬住讛 诪讚讬住拽 讜诇讛讻谞讬住 'text'."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Save packages selection"
-msgstr "砖诪讬专转 讘讞讬专转 讛讞讘讬诇讜转"
+msgid " Successfuly Restored on %s "
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Automated"
-msgstr ""
+msgid "Making printer port available for CUPS..."
+msgstr "讛讜驻讱 讗转 讛驻讜专讟 诇诪讚驻住转 诇讝诪讬谉 讘砖讘讬诇 CUPS..."
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Replay"
-msgstr "讛驻注诇 诪讞讚砖"
+msgid "Antigua and Barbuda"
+msgstr "讗谞讟讬讙讛 讜讘专讘讜讚讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Generate auto install floppy"
-msgstr "讘谞讛 讚讬住拽讟 讛驻注诇讛 讗讜讟讜诪讟讬转"
+msgid "Spanish"
+msgstr "住驻专讚讬转"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Reboot"
-msgstr "讛驻注诇讛 诪讞讚砖"
+msgid "Start"
+msgstr "讛转讞诇讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"Some steps are not completed.\n"
+"Arguments: (arg)\n"
"\n"
-"Do you really want to quit now?"
+"Activate/Disable ethernet cards promiscuity check."
msgstr ""
-"讞诇拽 诪讛砖诇讘讬诐 诇讗 讛讜砖诇诪讜.\n"
-"\n"
-"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇爪讗转 注讻砖讬讜?"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "讬讜爪专 讚讬住拽讟 讛驻注诇讛 讗讜讟讜诪讟讬转..."
+msgid "Configuring applications..."
+msgstr "诪讙讚讬专 讬讬砖讜诪讬诐..."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 专讬拽 讘讻讜谞谉 %s"
+msgid "Normal modem connection"
+msgstr "讞讬讘讜专 诪讜讚诐 专讙讬诇"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "File Selection"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "讛转拽谞转 诪讗转讞诇 讛诪注专讻转 谞讻砖诇讛. 讛砖讙讬讗讜转 讛讘讗讜转 讛转专讞砖讜:"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+" tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+" standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
-msgid "Installing bootloader"
-msgstr "诪转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转"
+msgid "CUPS"
+msgstr "CUPS"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"砖讙讬讗讛 讘讛转拽谞转 aboot,\n"
-"诇谞住讜转 诇讻驻讜转 讗转 讛讛转拽谞讛 讗驻讬诇讜 讗诐 讝讛 讛讜专住 讗转 讛诪讞讬爪讛 讛专讗砖讜谞讛?"
+msgid "Run config tool"
+msgstr "讛专爪转 讻诇讬 讛讙讚专讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘aboot?"
+msgid "Bootloader installation"
+msgstr "讛转拽谞转 诪讗转讞诇 讛诪注专讻转"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-msgstr ""
+msgid "Root partition size in MB: "
+msgstr "讙讜讚诇 诪讞讬爪讛 专讗砖讬转 讘MB:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Preparing bootloader..."
-msgstr "诪讻讬谉 讗转 诪讗转讞诇 讛诪注专讻转..."
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "讝讜讛讬 讞讘讬诇讛 讘住讬住讬转, 讗讬 讗驻砖专 诇讘讟诇 讗转 讘讞讬专转讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Domain Admin Password"
+msgid "Etherboot ISO image is %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Domain Admin User Name"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Windows Domain"
+msgid "Disconnect..."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Authentication Windows Domain"
-msgstr ""
+msgid "Saint Lucia"
+msgstr "住谞讟 诇讜爪~讬讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+msgid "Report"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NIS Server"
-msgstr "砖专转 NIS"
+msgid "Palau"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NIS Domain"
-msgstr "诪专讞讘 NIS"
+msgid "level"
+msgstr "专诪讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Authentication NIS"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LDAP Server"
-msgstr "砖专转 LDAP"
+msgid "Package Group Selection"
+msgstr "讘讞讬专讛 砖诇 拽讘讜爪转 讞讘讬诇讜转"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LDAP Base dn"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Authentication LDAP"
-msgstr ""
+msgid "You can configure each parameter of the module here."
+msgstr "讘讗驻砖专讜转讱 诇讛讙讚讬专 讻诇 驻专诪讟专 诪讛诪讜讚讜诇 讻讗谉."
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "LDAP"
-msgstr ""
+msgid "Choose the resolution and the color depth"
+msgstr "谞讗 诇讘讞讜专 专讝讜诇讜爪讬讛 讜专诪转 爪讘注"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Local files"
-msgstr "拽讘爪讬诐 诪拽讜诪讬讬诐"
+msgid "Emulate third button?"
+msgstr "诇讚诪讜转 讻驻转讜专 砖诇讬砖讬?"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Authentication"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "讛住讬住诪讗 讛讝讜 拽爪专讛 诪讬讚讬讬 (讞讬讬讘转 诇讛讻讬诇 诇驻讞讜转 %d 讗讜转讬讜转 讗讜 住讬诪谞讬诐)"
+msgid "Mount"
+msgstr "讞讬讘讜专"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "No password"
-msgstr "讗讬谉 住讬住诪讛"
+msgid "Creating auto install floppy"
+msgstr "讬爪讬专转 讚讬住拽讟 讛转拽谞讛 讗讜讟讜诪讟讬"
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Set root password"
-msgstr "讛讙讚专转 住讬住诪讛 专讗砖讬转 (root)"
+msgid "Install updates"
+msgstr "讛转拽谞转 注讚讻讜谞讬 诪注专讻转"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "text box height"
+msgstr "讙讜讘讛 转讬讘转 讟拽住讟"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "State"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Be sure a media is present for the device %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Services"
-msgstr "砖讬专讜转讬诐"
+msgid "Enable multiple profiles"
+msgstr "讛专砖讗转 诪住驻专 驻专讜驻讬诇讬诐"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
-msgid "System"
-msgstr "诪注专讻转"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "%s on %s"
-msgstr "%s 注诇 %s"
+msgid "Local printer"
+msgstr "诪讚驻住转 诪拽讜诪讬转"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bootloader"
-msgstr "诪讗转讞诇 讛诪注专讻转"
+msgid "Files Restored..."
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Boot"
-msgstr "讗转讞讜诇"
+msgid "Package selection"
+msgstr "讘讞讬专转 讞讘讬诇讜转"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "disabled"
-msgstr "讘讬讟讜诇"
+msgid "Mauritania"
+msgstr "诪讗讜专讬讟谞讬讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "activated"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Firewall"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Security"
-msgstr "讗讘讟讞讛"
+msgid "All primary partitions are used"
+msgstr "讻诇 讛诪讞讬爪讜转 讛专讗砖讬讜转 诪砖讜诪砖讜转"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Security Level"
-msgstr "专诪转 讛讗讘讟讞讛:"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid "Network"
-msgstr "专砖转"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "讝讬讛讜讬 讗讜讟讜诪讟讬 讜讛讙讚专转 讞讜诪专讛 讘讝诪谉 讗转讞讜诇."
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Network & Internet"
-msgstr "专砖转 讜讗讬谞讟专谞讟"
+msgid "Installation Server Configuration"
+msgstr "讛转拽谞转 讛讙讚专讜转 砖专转"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Graphical interface"
-msgstr "诪诪砖拽 讙专驻讬"
+msgid "Configuring IDE"
+msgstr "诪讙讚讬专 IDE"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Network functionality not configured"
+msgstr "转驻拽讜讚 讛专砖转 诇讗 讛讜讙讚专"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "TV card"
-msgstr "讻专讟讬住 TV"
+msgid "Configure module"
+msgstr "讛讙讚专转 诪讜讚讜诇"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "诇讗 讝讜讛讜 讻专讟讬住讬 拽讜诇. 讬砖 诇谞住讜转 \"讞讜诪专讚专讬讬拽\" 讗讞专讬 讛讛转拽谞讛"
+msgid "Cocos (Keeling) Islands"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "谞讗 诇讛专讬抓 \"sndconfig\" 讗讞专讬 讛讛转拽谞讛 讘讻讚讬 诇讛讙讚讬专 讗转 讻专讟讬住 讛拽讜诇 砖诇讱"
+msgid "Disconnecting from the Internet "
+msgstr "诪转谞转拽 诪讛讗讬谞讟专谞讟"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "讛讗诐 讬砖 诇讱 讻专讟讬住 拽讜诇 ISA?"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "转爪转专讻/讬 诇讛驻注讬诇 诪讞讚砖 讻讚讬 砖讛砖讬谞讜讬讬诐 讬讻谞住讜 诇转讜拽祝"
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Sound card"
-msgstr "讻专讟讬住 拽讜诇"
+msgid "Provider phone number"
+msgstr "诪住驻专 讛讟诇驻讜谉 砖诇 讛住驻拽"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Remote CUPS server"
-msgstr "砖专转 CUPS 专讞讜拽"
+msgid "Host %s"
+msgstr "诪讗专讞 %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No printer"
-msgstr "讗讬谉 诪讚驻住转"
+msgid "Armenia"
+msgstr "讗专诪谞讬讛"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer"
-msgstr "诪讚驻住转"
+msgid "Fiji"
+msgstr "驻讬讙~讬"
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Mouse"
-msgstr "注讻讘专"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Timezone"
-msgstr "讗讝讜专 讝诪谉"
+msgid "Second floppy drive"
+msgstr "讻讜谞谉 讚讬住拽讟讬诐 砖谞讬"
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Keyboard"
-msgstr "诪拽诇讚转"
+msgid "About Harddrake"
+msgstr "注诇 讞讜诪专讚专讬讬拽"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Summary"
-msgstr "住讬讻讜诐"
+msgid "Drive capacity"
+msgstr "拽讬讘讜诇转 讻讜谞谉"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "NTP Server"
-msgstr "砖专转 NTP"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"讛讻谞住/讬 讚讬住拽讟 诇讻讜谞谉\n"
+"讻诇 讛诪讬讚注 注诇 讚讬住拽讟 讝讛 讬讗讘讚"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "住讬谞讻专讜谉 讝爪诐 讗讜讟讜诪讟讬 (讘砖讬诪讜砖 NTP)"
+msgid "Size: %s"
+msgstr "讙讜讚诇: %s"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "砖注讜谉 诪注专讻转 诪讜讙讚专 诇GNT"
+msgid "Control and Shift keys simultaneously"
+msgstr "诪拽砖讬 Ctrl 讜Shift 讘讗讜转讜 讛讝诪谉"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which is your timezone?"
-msgstr "讗讬讝讛 讛讜讗 讗讬讝讜专 讛讝诪谉 砖诇讱?"
+msgid "secondary"
+msgstr "诪砖谞讬"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Would you like to try again?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇谞住讜转 砖谞讬转?"
+msgid "View Backup Configuration."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Unable to contact mirror %s"
+msgid "if set to yes, report check result to syslog."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "诪转拽砖专 注诐 讛诪专讗讛 讻讚讬 诇拽讘诇 讗转 讛专砖讬诪讛 砖诇 讞讘讬诇讜转 讝诪讬谞讜转..."
+msgid "No password"
+msgstr "讗讬谉 住讬住诪讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "讬砖 诇讘讞讜专 讗转 讛诪专讗讛 砖讘专爪讜谞讱 诇讛砖讬讙 诪诪谞讛 讗转 讛讞讘讬诇讜转"
+msgid "Nigeria"
+msgstr "谞讬讙专讬讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "诪转拽砖专 注诐 讗转专 诇讬谞讜拽住 诪谞讚专讬讬拽 讻讚讬 诇拽讘诇 专砖讬诪讛 砖诇 诪专讗讜转 讝诪讬谞讜转..."
+msgid "There is no existing partition to use"
+msgstr "讗讬谉 诪讞讬爪讛 拽讬讬诪转 诇砖讬诪讜砖"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The following scanners\n"
"\n"
-"Do you want to install the updates ?"
+"%s\n"
+"are available on your system.\n"
msgstr ""
-"讘讗驻砖专讜转讱 注讻砖讬讜 诇讛讜专讬讚 讞讘讬诇讜转 注讚讻讜谉. 讞讘讬诇讜转 讗诇讛 注讜讚讻谞讜 诇讗讞专 砖讞专讜专 讛讛驻爪讛. 讛诐 "
-"讬讻讜诇讬诐\n"
-" 诇讛讻讬诇 注讚讻讜谞讬 讗讘讟讞讛 讞砖讜讘讬诐.\n"
-"\n"
-"诇讛讜专讚转 讞讘讬诇讜转 讗诇讛 注诇讬讱 诇讛讬讜转 注诐 讞讬讘讜专 讗讬谞讟专谞讟 注讜讘讚.\n"
+"讛住讜专拽讬诐 讛讘讗讬诐\n"
"\n"
-"讛讗诐 讘专爪讜谞讱 诇讛转拽讬谉 讗转 讛注讚讻讜谞讬诐 讛讗诇讛?"
+"%s\n"
+"讝诪讬谞讬诐 讘诪注专讻转 砖诇讱.\n"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 注讚讻讜谉 诪讜讚讜诇讬诐 诇讻讜谞谉 %s"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "谞讗 诇讛讻谞讬住 讗转 讚讬住拽讟 讛讗转讞讜诇 讛诪砖讜诪砖 讘讻讜谞谉 %s"
+msgid "Hard drive information"
+msgstr "诪讬讚注 注诇 讛讻讜谞谉 讛拽砖讬讞"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Post-install configuration"
-msgstr "讛讙讚专讜转 诇驻谞讬-讛转拽谞讛"
+msgid "Russian"
+msgstr "专讜住讬转"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"诪转拽讬谉 讞讘讬诇讛 %s\n"
-"%d%%"
+msgid "Jordan"
+msgstr "讬专讚谉"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Preparing installation"
-msgstr "诪讻讬谉 讗转 讛讛转拽谞讛"
+msgid "Hide files"
+msgstr "讛住转专 拽讘爪讬诐"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "讚讬住拽 讛诪住讜诪谉 \"%s\""
+msgid "Auto-detect printers connected to this machine"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""
-"讗诐 讬砖 诇讱 讗转 讻诇 讛讚讬住拽讬诐 讛专砖讜诪讬诐 讬砖 诇诇讞讜抓 讗讬砖讜专.\n"
-"讗诐 讗讬谉 诇讱 讗祝 讚讬住拽 讬砖 诇诇讞讜抓 讘讬讟讜诇.\n"
-"讗诐 讞住专讬诐 诇讱 讚讬住拽讬诐 诪住讜讬讬诪讬诐 讬砖 诇讘讟诇 讘讞讬专转诐 讜讗讝 诇诇讞讜抓 讗讬砖讜专."
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "讛讻诇"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "讛转拽谞讛 诪讬谞讬诪诇讬转 讗诪讬转讬转 (讘讬讬讞讜讚 诇讗 urpmi)"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "注诐 诪住诪讻讬诐 讘住讬住讬讬诐 (诪讜诪诇抓!)"
+msgid "Sorry, no floppy drive available"
+msgstr "住诇讬讞讛, 讗讬谉 讻讜谞谉 讚讬住拽讟讬诐 谞讙讬砖"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "With X"
-msgstr "注诐 X"
+msgid "Bolivia"
+msgstr "讘讜诇讬讘讬讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-"讗讬谞讱 讘讞专转 讗祝 拽讘讜爪讛 砖诇 讞讘讬诇讜转.\n"
-"谞讗 诇讘讞讜专 讗转 讛讛转拽谞讛 讛诪讬谞讬诪诇讬转 砖讘专爪讜谞讱 诇讘爪注:"
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Type of install"
-msgstr "住讜讙 诇讛转拽谞讛"
+msgid "Bad package"
+msgstr "讞讘讬诇讛 驻讙讜诪讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Selected size is larger than available space"
-msgstr "讛讙讜讚诇 讛谞讘讞专 讙讚讜诇 讬讜转专 诪讛诪拽讜诐 讛讝诪讬谉"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"讛驻讬讻转 讛诪讞砖讘 诇砖专转 诇讬谞讜拽住 讘注诇 注讜爪诪讛: 砖专转 Web, 讚讜讗诇, 讞讜诪转 讗砖, 专讗讜讟专, 拽讘爪讬诐 讜砖专转 "
+"讛讚驻住讛 (讜注讜讚) 讘诪专讞拽 讻诪讛 诇讞讬爪讜转 讘诇讘讚!"
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 讛讻讜诇诇 讘讞讬专转 讞讘讬诇讜转"
+msgid "DrakSec Basic Options"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Loading from floppy"
-msgstr "讟讜注谉 诪讛讚讬住拽讟"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program. Just type \"sndconfig\" in a console."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Package selection"
-msgstr "讘讞讬专转 讞讘讬诇讜转"
+msgid "Romania"
+msgstr "专讜诪谞讬讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Save on floppy"
-msgstr "砖诪讬专讛 注诇 讚讬住拽讟"
+msgid "choose device"
+msgstr "讬砖 诇讘讞讜专 讛转拽谉"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Load from floppy"
-msgstr "讟注讬谞讛 诪讚讬住拽讟"
+msgid "Canada"
+msgstr "拽谞讚讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Remove from LVM"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "诇诪注专讻转 砖诇讱 讗讬谉 诪住驻讬拽 砖讟讞 驻谞讜讬 诇讛转拽谞讛 讗讜 砖讚专讜讙 (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Looking for available packages..."
-msgstr "诪讞驻砖 讞讘讬诇讜转 讝诪讬谞讜转..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "诪讜爪讗 讞讘讬诇讜转 诇砖讚专讜讙..."
+msgid "Timezone"
+msgstr "讗讝讜专 讝诪谉"
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Looking at packages already installed..."
-msgstr "诪讞驻砖 讞讘讬诇讜转 砖讻讘专 诪讜转拽谞讜转..."
+msgid "German"
+msgstr "讙专诪谞讬转"
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "诪讞驻砖 讞讘讬诇讜转转 讝诪讬谞讜转 讜讘讜谞讛 讘住讬住 谞转讜谞讬诐 砖诇 rpm... "
+msgid "Next ->"
+msgstr "<- 讛讘讗"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "讗讬谉 诪住驻讬拽 讝讬讻专讜谉 讜讬专讟讜讗诇讬 诇讛讟注讬谉 讗转 讛讛转拽谞讛, 谞讗 诇讛讜住讬祝 拽爪转"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
-"谞讻砖诇 讘讘讚讬拽转 诪注专讻转 讛拽讘爪讬诐 %s. 讛讗诐 讘专爪讜谞讱 诇转拽谉 讗转 讛砖讙讬讗讜转? (注诇讜诇 诇讛讬谞讝拽 诪讬讚注)"
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Check bad blocks?"
-msgstr "诇讘讚讜拽 讘诇讜拽讬诐 注诐 砖讙讬讗讜转?"
+msgid "Guinea-Bissau"
+msgstr "讙讬谞讬讗讛 讘讬住讗讜"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "讬砖 诇讘讞讜专 讗转 讛诪讞讬爪讛 砖讘专爪讜谞讱 诇驻专诪讟"
+msgid "Horizontal refresh rate"
+msgstr "拽爪讘 专注谞讜谉 讗讜驻拽讬"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "讬砖 爪讜专讱 讘讛驻注诇转 讛诪讞砖讘 诪讞讚砖 讻讚讬 砖讛砖讬谞讜讬讬诐 讘砖讜诇讞谉 讛诪讞讬爪讜转 讬转驻住讜 诪拽讜诐"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Choose the mount points"
-msgstr "讬砖 诇讘讞讜专 讗转 谞拽讜讚讜转 讛讞讬讘讜专"
+msgid "USB controllers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "住讜专拽 讗转 讛诪讞讬爪讜转 讻讚讬 诇诪爪讜讗 谞拽讜讚讜转 讞讬讘讜专"
+msgid "What norm is your TV using?"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No partition available"
-msgstr "讗讬谉 诪讞讬爪讜转 讝诪讬谞讜转"
+msgid "Type:"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring IDE"
-msgstr "诪讙讚讬专 IDE"
+msgid "Share name"
+msgstr "砖诐 讛砖讬转讜祝"
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "enable"
+msgstr "讛专砖讛"
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "诪讙讚讬专 讻专讟讬住讬 PCMCIA..."
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "诪转拽砖专 注诐 讗转专 诇讬谞讜拽住 诪谞讚专讬讬拽 讻讚讬 诇拽讘诇 专砖讬诪讛 砖诇 诪专讗讜转 讝诪讬谞讜转..."
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"拽专转讛 转拽诇讛 讘注转 谞住讬讜谉 诇讛驻注讬诇 诪讞讚砖 讗转 讛专砖转: \n"
+"\n"
+"%s"
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Button 3 Emulation"
-msgstr "讛讚诪讬讬转 讻驻转讜专 砖诇讬砖讬"
+msgid "Remove the loopback file?"
+msgstr ""
#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Button 2 Emulation"
-msgstr "讛讚诪讬讬转 讻驻转讜专 砖谞讬"
+msgid "Selected size is larger than available space"
+msgstr "讛讙讜讚诇 讛谞讘讞专 讙讚讜诇 讬讜转专 诪讛诪拽讜诐 讛讝诪讬谉"
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Buttons emulation"
-msgstr "讛讚诪讬讬转 讻驻转讜专讬诐"
+msgid "NCP server name missing!"
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr ""
+msgid "Please choose your country."
+msgstr "讘讞讬专转 讗专抓"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse Port"
-msgstr "驻讜专讟 讛注讻讘专"
+msgid "Hard Disk Backup files..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please choose your type of mouse."
-msgstr "谞讗 诇讘讞讜专 讗转 住讜讙 讛注讻讘专 砖诇讱."
+msgid "Laotian"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Encryption key for %s"
-msgstr "诪驻转讞 讛爪驻谞讛 注讘讜专 %s"
+msgid "Samoa"
+msgstr "住诪讜讗讛"
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Upgrade %s"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "讛讗诐 讝讜 讛转拽谞讛 讗讜 注讚讻讜谉?"
+msgid "Re-generating list of configured scanners ..."
+msgstr "讬爪讬专讛 诪讞讚砖 砖诇 专砖讬诪转 讛住讜专拽讬诐 讛诪讜讙讚专讬诐 ..."
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Install/Upgrade"
-msgstr "讛转拽谞讛/注讚讻讜谉"
+msgid "Scanner"
+msgstr "住讜专拽"
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "讛谞讛 讛专砖讬诪讛 讛诪诇讗讛 砖诇 讛诪拽诇讚讜转 讛讝诪讬谞讜转"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "讗讝讛专讛: 讘讚讬拽转 讻专讟讬住 讛诪住讱 讛讝讛 注诇讜诇讛 诇转拽讜注 诇讱 讗转 讛诪讞砖讘"
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "谞讗 诇讘讞讜专 讗转 驻诇讟 讛诪拽诇讚转 砖诇讱."
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "砖诐 讛诪砖转诪砖 讞讬讬讘 诇讛讻讬诇 讗讱 讜专拽 讘讗讜转讬讜转 拽讟谞讜转, 诪住驻专讬诐, 讘'-', 讜讘'_'"
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Quit"
-msgstr "讬爪讬讗讛"
+msgid "Menudrake"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "License agreement"
-msgstr "讛住讻诐 专讬砖讜讬"
+msgid "Welcome To Crackers"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "An error occurred"
-msgstr "砖讙讬讗讛 讛转专讞砖讛"
+msgid "Module options:"
+msgstr "讗驻砖专讜讬讜 诪讜讚讜诇:"
-#: ../../install_steps_newt.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr "<Tab>/<Alt-Tab> 讘讬谉 讗诇诪谞讟讬诐 | <Space> 讘讞讬专讛 | <F12> 诪住讱 讛讘讗"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr "讗讘讟讞转 讛专砖转 砖诇讱 注诐 讞讜诪转 讛讗砖 诪砖讜诇砖转 砖诇 专砖转"
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "讛转拽谞转 诇讬谞讜拽住 诪谞讚专讬讬拽 %s"
+msgid "Go on without configuring the network"
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No floppy drive available"
-msgstr "讗讬谉 讻讜谞谉 讚讬住拽讟讬诐 讝诪讬谉"
+msgid "Abort"
+msgstr "讘讬讟讜诇"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Welcome to %s"
-msgstr "讘专讜讻讬诐 讛讘讗讬诐 诇- %s"
+msgid "No password prompt on %s at port %s"
+msgstr ""
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+msgid "Please check if you want to use the non-rewinding device."
msgstr ""
-"诪住驻专 讞讘讬诇讜转 讞砖讜讘讜转 诇讗 讛讜转拽谞讜 讻专讗讜讬.\n"
-"讻谞专讗讛 砖讬砖 讘注讬讛 讘讚讬住拽 讗讜 讘cdrom 砖诇讱.\n"
-"讬砖 诇讘讚讜拽 讗转 讛讚讬住拽 注诇 诪讞砖讘 诪讜转拽谉 讘注讝专转 \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../install_steps.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "诪砖讻驻诇 谞拽讜讚转 讞讬讘讜专 %s"
+msgid "Usage of remote scanners"
+msgstr "砖讬诪讜砖 讘住讜专拽讬诐 诪专讜讞拽讬诐"
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+msgid "\t-CDROM.\n"
msgstr ""
-"砖讙讬讗讛 讛转专讞砖讛, 讗讱 讗讬谞讬 讬讜讚注 讗讬讱 诇讛转诪讜讚讚 讗讬转讛 讘注讚讬谞讜转.\n"
-"讛诪砖讱 讛转诪讜讚讚讜转 注诐 住讬讻讜谉 讘讗讞专讬讜转讱"
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please wait"
-msgstr "谞讗 诇讛诪转讬谉"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"诪讞讬爪转 讞诇讜谞讜转 讗讬谞讛 诪讗讜讞讛. 谞讗 诇讛驻注讬诇 诪讞讚砖 讗转 讛诪讞砖讘 讜诇讛专讬抓 讗讬讞讜讬 讚讬住拽, 诇讗讞专 诪讻谉 "
+"讬砖 诇讛驻注讬诇 诪讞讚砖 讗转 讛转拽谞转 诇讬谞讜拽住 诪谞讚专讬讬拽"
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ok"
-msgstr "讗讬砖讜专"
+msgid "Dvorak (Norwegian)"
+msgstr ""
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Finish"
-msgstr "住讬讜诐"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Basic"
-msgstr "讘住讬住讬转"
+msgid "Unable to fork: %s"
+msgstr ""
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Advanced"
-msgstr "诪转拽讚诐"
+msgid "Type: "
+msgstr "住讜讙:"
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove"
-msgstr "讛住专讛"
+msgid "<-- Edit Client"
+msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Modify"
-msgstr "砖讬谞讜讬"
+msgid "no fonts found"
+msgstr ""
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Add"
-msgstr "讛讜住驻讛"
+msgid "Mouse"
+msgstr "注讻讘专"
-#: ../../interactive.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Choose a file"
-msgstr "讬砖 诇讘讞讜专 拽讜讘抓"
+msgid "not enough room in /boot"
+msgstr "讗讬谉 诪住驻讬拽 诪拽讜诐 讘/boot"
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+msgid "Choosing an arbitratry driver"
msgstr ""
-"讻讗谉 讬砖 讗驻砖专讜转 诇讘讞讜专 讗转 砖讬诇讜讘 讛诪拽砖讬诐 砖讬专砖讛 诇讱 诇讛讞诇讬祝 讘讬谉\n"
-"驻诇讟讬诐 砖讜谞讬诐 砖诇 讛诪拽诇讚转 (砖驻讜转)"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Right \"Windows\" key"
-msgstr "诪拽砖 \"讞诇讜谞讜转\" 讛讬诪谞讬"
+msgid "Host name"
+msgstr "砖诐 诪讗专讞"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Left \"Windows\" key"
-msgstr "诪拽砖 \"讞诇讜谞讜转\" 讛砖诪讗诇讬"
+msgid "Liechtenstein"
+msgstr "诇讬讻讟谞砖讟讬讬谉"
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "\"Menu\" key"
-msgstr "诪拽砖 \"转驻专讬讟\""
+msgid "the color of the progress bar"
+msgstr "爪讘注 驻住 讛讛转拽讚诪讜转"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "诪拽砖讬 Alt 讜Shift 讘讗讜转讜 讝诪谉"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "诪拽砖讬 Ctrl 讜Alt 讘讗讜转讜 讛讝诪谉"
+msgid "Add to RAID"
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "CapsLock key"
-msgstr "诪拽砖 CapsLock"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "诪拽砖讬 Ctrl 讜Shift 讘讗讜转讜 讛讝诪谉"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "讛诪讚驻住转 \"%s\" 讛讜住驻讛 讘讛爪诇讞讛 诇Star Office/OpenOffice.org/GIMP."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "砖谞讬 诪拽砖讬 讛Shift 讘讗讜转讜 讛讝诪谉"
+msgid "No floppy drive available!"
+msgstr "讗讬谉 讻讜谞谉 讚讬住拽讟讬诐 讝诪讬谉!"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Right Alt key"
-msgstr "诪拽砖 Alt 讛讬诪谞讬"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"讻讚讬 诇讚注转 注诇 讛讗驻砖专讜讬讜转 讛讟诪讜谞讜转 讘诪讚驻住转 砖诇讱 讬砖 诇拽专讜讗 讗转 讛专砖讬诪讛 砖讻讗谉 讗讜 诇诇讞讜抓 注诇 "
+"讻驻转讜专 \"专砖讬诪转 讗驻砖专讜讬讜转 讛讚驻住讛\".%s%s%s\n"
+"\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Yugoslavian (latin)"
-msgstr "讬讜讙讜住诇讘讬转 (latin)"
+msgid "Continue anyway?"
+msgstr "诇讛诪砖讬讱 讘讻诇 讝讗转?"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
+"讗诐 讛诪讚驻住转 砖诇讱 诇讗 讘专砖讬诪讛, 讬砖 诇讘讞讜专 诪讚驻住转 转讜讗诪转 (专砖讜诐 讘诪讚专讬讱 砖诇 讛诪讚驻住转) 讗讜 "
+"讚讜诪讛."
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "US keyboard (international)"
-msgstr "诪拽诇讚转 讗专讛\"讘 (讘讬谞诇讗讜诪讬转)"
+msgid "Printer"
+msgstr "诪讚驻住转"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "US keyboard"
-msgstr "诪拽诇讚转 讗专讛\"讘"
+msgid "Saudi Arabia"
+msgstr "注专讘 讛住注讜讚讬转"
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "UK keyboard"
-msgstr "诪拽诇讚转 讗谞讙诇讬讛"
+msgid "Internet"
+msgstr "讗讬谞讟专谞讟"
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Ukrainian"
-msgstr "讗讜拽专讬讬谞讬转"
+msgid "Some devices were added:\n"
+msgstr "诪住驻专 讛转拽谞讬诐 讛讜住驻讜:\n"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "讟讜专拽讬转 (诪讜讚诇 \"Q\" 诪讜讚专谞讬)"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "转讻讜谞讜转: %s 爪讬诇讬谞讚专讬诐, %s 专讗砖讬诐, %s 住拽讟讜专讬诐\n"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "讟讜专拽讬转 (诪讜讚诇 \"F\" 诪住讜专转讬)"
+msgid "Printing on the printer \"%s\""
+msgstr "诪讚驻讬住 注诇 讛诪讚驻住转 \"%s\""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Tajik keyboard"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Thai keyboard"
+msgid "Restore From Tape"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr ""
+msgid "Choose the profile to configure"
+msgstr "讘讞专 驻专讜驻讬诇 诇讛讙讚专讛"
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Tamil (ISCII-layout)"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Serbian (cyrillic)"
+msgid "Backup Now from configuration file"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "住诇讜讘拽讬转 (QWERTY)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "住诇讜讘拽讬转 (QWERTZ)"
-
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Slovenian"
-msgstr ""
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "砖诪讜转 谞拽讜讚讜转 讞讬讘讜专 爪专讬讻讬诐 诇讛讻讬诇 专拽 讗讜转讬讜转, 诪住驻专讬诐 讜拽讜 转讞转讜谉"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Swedish"
+msgid "Restarting printing system..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian (Yawerty)"
-msgstr "专讜住讬转 (Yawerty)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian"
-msgstr "专讜住讬转"
-
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Romanian (qwerty)"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Romanian (qwertz)"
-msgstr ""
+msgid "See hardware info"
+msgstr "爪驻讬讬讛 讘诪讬讚注 讞讜诪专讛"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Canadian (Quebec)"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "住拽讟讜专 专讗砖讜谉 砖诇 诪讞讬爪转 讗转讞讜诇 讛诪注专讻转"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Portuguese"
-msgstr ""
+msgid "Printer manufacturer, model"
+msgstr "讬爪专谉 诪讚驻住转, 诪讜讚诇"
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr ""
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - 讛讚驻住, 讗诇 转诪转讬谉"
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Polish (qwerty layout)"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
msgstr ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : MTS 讗讬驻砖讜专\n"
+"--disable : MTS 讘讬讟讜诇\n"
+"--start : MTS 讛转讞诇转\n"
+"--stop : MTS 注爪讬专转\n"
+"--adduser : MTS 讛讜住驻转 诪砖转诪砖 诪注专讻转 拽讬讬诐 诇 (requires username)\n"
+"--deluser : MTS 诪讞讬拽转 诪砖转诪砖 拽讬讬诐 诪(requires username)\n"
+"--addclient : MTS 讛讜住驻转 诪讞砖讘 诇拽讜讞 诇 (requires MAC address, IP, nbi "
+"image name)\n"
+"--delclient : MTS 诪讞讬拽转 诪讞砖讘 诇拽讜讞 诪(requires MAC address, IP, nbi image "
+"name)"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Norwegian"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Dutch"
-msgstr ""
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "讛转拽谞转 注专讻讜转 谞讜砖讗 诇讟讜注谉 讛住驻诇讗砖 讜Lilo 讛讜砖诇诪讛 讘讛爪诇讞讛"
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Maltese (US)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Maltese (UK)"
-msgstr ""
+msgid "Modify"
+msgstr "砖讬谞讜讬"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Mongolian (cyrillic)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Myanmar (Burmese)"
+msgid "Need hostname, username and password!"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Macedonian"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Malayalam"
+msgid "HardDrake"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Latvian"
-msgstr ""
+msgid "new"
+msgstr "讞讚砖"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
+msgid "Would you like to try again?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇谞住讜转 砖谞讬转?"
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
+msgid "Wizard"
+msgstr "讗砖祝"
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
+msgid "Edit selected server"
+msgstr "注专讬讻转 讛砖专转 讛谞讘讞专"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Lithuanian AZERTY (old)"
+msgid "Please choose where you want to backup"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Laotian"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "讬砖 爪讜专讱 讘讛驻注诇转 讛诪讞砖讘 诪讞讚砖 讻讚讬 砖讛砖讬谞讜讬讬诐 讘砖讜诇讞谉 讛诪讞讬爪讜转 讬转驻住讜 诪拽讜诐"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Latin American"
+msgid "Do not include the browser cache"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Korean keyboard"
-msgstr ""
+msgid "Please, choose your keyboard layout."
+msgstr "谞讗 诇讘讞讜专 讗转 转爪讜专转 讛诪拽砖讬诐."
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
-msgid "Japanese 106 keys"
-msgstr ""
+msgid "Standard"
+msgstr "住讟谞讚专讟讬"
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
#, c-format
-msgid "Inuktitut"
-msgstr ""
+msgid "Please choose your mouse type."
+msgstr "谞讗 诇讘讞讜专 讗转 住讜讙 讛注讻讘专 砖诇讱."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Italian"
+msgid "Connect..."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Icelandic"
+msgid "Failed to configure printer \"%s\"!"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Iranian"
-msgstr "讗讬专谞讬转"
-
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "注讘专讬转 (Phonetic)"
+msgid "not configured"
+msgstr "诇讗 诪讜讙讚专"
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Israeli"
-msgstr "注讘专讬转"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Croatian"
-msgstr ""
+msgid "About"
+msgstr "注诇 讝讛"
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Hungarian"
-msgstr "讛讜谞讙专讬转"
+msgid "Proxies configuration"
+msgstr "讛讙讚专讜转 驻专讜拽住讬诐"
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Gurmukhi"
-msgstr ""
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gujarati"
-msgstr ""
+msgid "Start: sector %s\n"
+msgstr "讛转讞诇讛: 住拽讟讜专 %s\n"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Greek"
+msgid "Network interface already configured"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
+msgid "Couldn't access the floppy!"
+msgstr "诇讗 讛讬讛 讗驻砖专 诇讛讻谞住 诇讚讬住拽讟!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Georgian (\"Russian\" layout)"
+msgid "connecting to Bugzilla wizard ..."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "爪专驻转讬转"
-
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Finnish"
-msgstr ""
+msgid "Mail Server"
+msgstr "砖专转 讚讜讗诇"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Spanish"
-msgstr ""
+msgid "Please click on a partition"
+msgstr "谞讗 诇诇讞讜抓 注诇 诪讞讬爪讛"
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Estonian"
-msgstr ""
+msgid "Linux"
+msgstr "诇讬谞讜拽住"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Dvorak (Swedish)"
-msgstr ""
+msgid "Have a nice day!"
+msgstr "讬讜诐 讟讜讘!"
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Dvorak (Norwegian)"
+msgid "across Network"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Dvorak (US)"
-msgstr ""
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Danish"
+msgid "Upgrade %s"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Devanagari"
+msgid "Select Printer Connection"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "讙专诪谞讬转 (诇诇讗 诪拽砖讬诐 诪转讬诐)"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "German"
-msgstr "讙专诪谞讬转"
+msgid "Scanning for TV channels in progress ..."
+msgstr "讞讬驻砖 注专讜爪讬 讟诇讜讜讬讝讬讛 讘驻注讜诇讛..."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Czech (QWERTY)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Czech (QWERTZ)"
+msgid "IP Range Start:"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Swiss (French layout)"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Swiss (German layout)"
+msgid "the height of the progress bar"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Belarusian"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Bosnian"
-msgstr ""
+msgid "Argentina"
+msgstr "讗专讙谞讟讬谞讛"
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Brazilian (ABNT-2)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Bulgarian (BDS)"
+msgid "Domain Name Server"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Bulgarian (phonetic)"
-msgstr ""
+msgid "Security Level:"
+msgstr "专诪转 讗讘讟讞讛:"
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Bengali"
-msgstr ""
+msgid "Mount points must begin with a leading /"
+msgstr "谞拽讜讚讜转 讞讬讘讜专 讞讬讬讘讜转 诇讛转讞讬诇 讘住诇讗砖(/)"
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Belgian"
-msgstr "讘诇讙讬转"
+msgid "Postfix Mail Server"
+msgstr "砖专转 讛讚讜讗诇 砖诇 Postfix"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr ""
+msgid "Quit without saving"
+msgstr "讬爪讬讗讛 诇诇讗 砖诪讬专讛"
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Arabic"
-msgstr ""
+msgid "Yemen"
+msgstr "转讬诪谉"
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Armenian (phonetic)"
-msgstr ""
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "诪讜爪专 讝讛 讝诪讬谉 讘讗转专 MandrakeStore."
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Armenian (typewriter)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
msgstr ""
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Armenian (old)"
-msgstr ""
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> 讬砖 讚讘专讬诐 专讘讬诐 诇讘讞讜专 诪转讜讱 (%s).\n"
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Albanian"
-msgstr ""
+msgid "Hard drive detection"
+msgstr "讝讬讛讜讬 讚讬住拽 拽砖讬讞"
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Polish"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
+"讗讬谞讱 讘讞专转 讗祝 拽讘讜爪讛 砖诇 讞讘讬诇讜转.\n"
+"谞讗 诇讘讞讜专 讗转 讛讛转拽谞讛 讛诪讬谞讬诪诇讬转 砖讘专爪讜谞讱 诇讘爪注:"
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Dvorak"
+msgid "Please enter the WebDAV server URL"
msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Zimbabwe"
-msgstr "讝讬诪讘讘讜讗讛"
+msgid "Tajikistan"
+msgstr "讟讗谞~讬拽讬住讟谉"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Zambia"
-msgstr "讝诪讘讬讛"
+msgid "Accept"
+msgstr "拽讘诇"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "South Africa"
-msgstr "讚专讜诐 讗驻专讬拽讛"
+msgid "Description"
+msgstr "转讬讗讜专"
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Serbia"
-msgstr "住专讘讬讛"
+msgid "Error opening %s for writing: %s"
+msgstr "砖讙讬讗讛 讘驻转讬讞转 %s 诇讻转讬讘讛 砖诇: %s"
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Mayotte"
-msgstr "诪讗讬讜讟"
+msgid "Mouse type: %s\n"
+msgstr "住讜讙 注讻讘专: %s\n"
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Yemen"
-msgstr "转讬诪谉"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 注诐 XFree %s."
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Samoa"
-msgstr "住诪讜讗讛"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "谞讗 诇讘讞讜专 讗转 讙讜讚诇 讛诪讚讬讛 讘诪讙讛-讘讬转 砖诇 讛DVD/CD 砖诇讱"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Wallis and Futuna"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Vanuatu"
-msgstr "讜谞讜讗讟讜"
+msgid "Expert Area"
+msgstr "讗讬讝讜专 诪讜诪讞讬诐"
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Vietnam"
-msgstr "讜讬讬讟谞讗诐"
+msgid "Choose a monitor"
+msgstr "讘讞专 诪住讱"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "讗讬讬 讛讘转讜诇讛 讛讗诪拽专讬讬诐"
+msgid "Empty label not allowed"
+msgstr "转讜讜讬转 专讬拽讛 讗住讜专讛"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Virgin Islands (British)"
-msgstr "讗讬讬 讛讘转讜诇讛 讛讘专讬讟讬讬诐"
+msgid "Maltese (UK)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Venezuela"
-msgstr "讜谞爪讜讗诇讛"
+msgid "I can't add any more partition"
+msgstr "讗讬谉 讘讗驻砖专讜转讬 诇讛讜住讬祝 诪讞讬爪讛 谞讜住驻转"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "住谞讟 讜讬谞住谞讟 讜讛讙专谞讬讚讬诐"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "诇讟讜讜讬讛"
+msgid "Size in MB: "
+msgstr "讙讜讚诇 讘MB:"
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Uzbekistan"
-msgstr "讗讜讝讘拽讬住讟谉"
+msgid "Remote printer"
+msgstr "诪讚驻住转 专讞讜拽讛"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Uruguay"
-msgstr "讗讜专讜讙讜讜讗讬"
+msgid "Please choose a language to use."
+msgstr "讗谞讗 讘讞专 砖驻讛 诇砖讬诪讜砖."
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Uganda"
-msgstr "讗讜讙谞讚讛"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "讬砖 讗驻砖专讜转 诇讻讱 砖讻砖讛诪讞砖讘 讬注诇讛 讛讜讗 讬讻谞住 讗讜讟讜诪讟讬转 诇讞砖讘讜谉 砖诇 讗讞讚 讛诪砖转诪砖讬诐."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Ukraine"
-msgstr "讗讜拽专讗讬谞讛"
+msgid "Floppy format"
+msgstr "驻讬专诪讜讟 讚讬住拽讟"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Tanzania"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Taiwan"
-msgstr "转讗讬讜讜谉"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Tuvalu"
-msgstr "讟讜讘讗诇讜"
+msgid "Generic Printers"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Trinidad and Tobago"
-msgstr "讟专讬谞讬讚讚 讜 讟讜讘讙讜"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Turkey"
-msgstr "讟讜专拽讬讛"
+msgid "The scanners on this machine are available to other computers"
+msgstr "讛住讜专拽讬诐 注诇 诪讞砖讘 讝讛 讝诪讬谞讬诐 诇诪讞砖讘讬诐 讗讞专讬诐"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Tonga"
-msgstr "讟讜谞讙讛"
+msgid "First sector of the root partition"
+msgstr "讛诪住诇讜诇 讛专讗砖讜谉 砖诇 诪讞讬爪转 讗转讞讜诇 讛诪注专讻转"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Tunisia"
-msgstr "讟讜谞讬住讬讛"
+msgid "Alternative drivers"
+msgstr "讛转拽谞讬诐 讗诇讟专谞讟讬讘讬诐"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Turkmenistan"
-msgstr "讟讜专拽诪谞讬住讟讗谉"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "East Timor"
-msgstr "诪讝专讞 讟讬诪讜专"
+msgid "Initrd"
+msgstr "Initrd"
#: ../../lang.pm:1
#, c-format
-msgid "Tokelau"
+msgid "Cape Verde"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Tajikistan"
-msgstr "讟讗谞~讬拽讬住讟谉"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "讛讗诐 诇诪注讘讚 讛讝讛 讬砖 讗转 讘讗讙 讛转专讚诪转 砖诇 Cyrix 6x86?"
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "转讗讬诇谞讚"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
+"诇诪注讘讚讬 驻谞讟讬讜诐 讛专讗砖讜谞讬诐 讛讬讗 讘讗讙 砖讙专诐 诇讛诐 诇拽驻讜注 讻讗砖专 讞讬砖讘讜 讗转 讛住讬讘讬转 F00F"
#: ../../lang.pm:1
#, c-format
-msgid "Togo"
-msgstr "讟讜讙讜"
+msgid "Guam"
+msgstr "讙讜讗诐"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "French Southern Territories"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Chad"
-msgstr "爪~讚"
-
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "讗讬讬 拽讬讬拽讜住"
+msgid "/Options/Test"
+msgstr "/讗驻砖专讜讬讜转/讘讚讬拽讛"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Swaziland"
-msgstr "住讜讜讝讬诇谞讚"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Syria"
-msgstr "住讜专讬谞讗诐"
+msgid "Mounting partition %s"
+msgstr "诪讞讘专 诪讞讬爪讛 - %s"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "El Salvador"
-msgstr "讗诇 住诇讘讚讜专"
+msgid "User name"
+msgstr "砖诐 诪砖转诪砖"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Sao Tome and Principe"
-msgstr "住讗讜 转讜诪讛 讜驻专讬谞住讬驻讛"
+msgid "New configuration (isdn-light)"
+msgstr "讛讙讚专讛 讞讚砖讛 (isdn-light)"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Suriname"
-msgstr "住讜专讬谞讗诐"
+msgid "Userdrake"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Somalia"
-msgstr "住讜诪诇讬讛"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "讘讗讬讝讜 诪讞讬爪讛 讘专爪讜谞讱 诇讛转砖转诪砖 讘砖讘讬诇 Linux4Win?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Senegal"
-msgstr "住谞讙诇"
+msgid "Backup system"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "San Marino"
-msgstr "住讗谉-诪讗专讬谞讜"
+msgid "Test pages"
+msgstr "讚驻讬 谞住讬讜谉"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sierra Leone"
-msgstr "住讬讬专讛 诇讬讗讜谞讛"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Slovakia"
-msgstr "住诇讜讘拽讬讛"
+msgid "Checking %s"
+msgstr "讘讜讚拽 %s"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
+msgid "TCP/Socket Printer Options"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Slovenia"
-msgstr "住诇讜讘谞讬讛"
-
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Saint Helena"
-msgstr "住谞讟 讛诇谞讛"
+msgid "Card mem (DMA)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Singapore"
-msgstr "住讬谞讙驻讜专"
+msgid "France"
+msgstr "爪专驻转"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Sudan"
-msgstr "住讜讚谉"
+msgid "browse"
+msgstr "住讬讬专"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Seychelles"
-msgstr "讗讬讬 住讬讬砖诇"
+msgid "Checking installed software..."
+msgstr "讘讜讚拽 转讜讻谞讛 诪讜转拽谞转..."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Solomon Islands"
-msgstr "讗讬讬 砖诇诪讛"
+msgid "Remote printer name missing!"
+msgstr "砖诐 诪讚驻住转 诪专讜讞拽转 讞住专!"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Saudi Arabia"
-msgstr "注专讘 讛住注讜讚讬转"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讗驻砖专 讛讚驻住讛 讘诪讚驻住讜转 讛专砖转 讛驻谞讬诪讬转?\n"
#: ../../lang.pm:1
#, c-format
-msgid "Rwanda"
-msgstr "专讜讗谞讚讛"
+msgid "Turkey"
+msgstr "讟讜专拽讬讛"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Russia"
-msgstr "专讜住讬讛"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Romania"
-msgstr "专讜诪谞讬讛"
+msgid "Number of buttons"
+msgstr "诪住驻专 讻驻转讜专讬诐"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Reunion"
+msgid "Vietnamese \"numeric row\" QWERTY"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Qatar"
-msgstr "拽讟讗专"
+msgid "Module"
+msgstr "诪讜讚讜诇"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Palau"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Paraguay"
-msgstr "驻专讙讜讜讗讬"
+msgid "Hardware"
+msgstr "讞讜诪专讛"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Portugal"
-msgstr "驻讜专讟讜讙诇"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "诪拽砖讬 Ctrl 讜Alt 讘讗讜转讜 讛讝诪谉"
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Palestine"
-msgstr "驻诇住讟讬谉"
+msgid "United States"
+msgstr "讗专爪讜转 讛讘专讬转"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Puerto Rico"
-msgstr "驻讜讗专讟讜-专讬拽讜"
+msgid "Default OS?"
+msgstr "诪注专讻转 讛驻注诇讛 - 讘专讬专转 诪讞讚诇?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Pitcairn"
+msgid "Swiss (German layout)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "Configure all heads independently"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Poland"
-msgstr "驻讜诇讬谉"
-
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Pakistan"
-msgstr "驻拽讬住讟谉"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Philippines"
-msgstr "讛驻讬诇讬驻讬谞讬诐"
+msgid "NTP Server"
+msgstr "砖专转 NTP"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Papua New Guinea"
-msgstr "驻讗驻讜讗讛-讙讬谞讗讛 讛讞讚砖讛"
+msgid "Load/Save on floppy"
+msgstr "讟注谉 讗讜 砖诪讜专 讘讚讬住拽讟"
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "French Polynesia"
-msgstr "驻讜诇讬谞讝讬讛 讛爪指专职驻指转执讬转"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Peru"
-msgstr "驻专讜"
+msgid "nice"
+msgstr "讬驻讛"
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Panama"
-msgstr "驻谞诪讛"
+msgid "Leaving in %d seconds"
+msgstr "注讜讝讘 转讜讱 %d 讚拽讜转"
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Oman"
-msgstr "注讜诪谉"
+msgid "Please choose which serial port your modem is connected to."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "New Zealand"
-msgstr "谞讬讜-讝讬诇谞讚"
+msgid "Country"
+msgstr "讗专抓"
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Niue"
+msgid "Property"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Nauru"
-msgstr "谞讗讜专讜"
+msgid "Ghostscript"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Nepal"
-msgstr "谞驻讗诇"
+msgid "LAN Configuration"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Nicaragua"
-msgstr "谞讬拽讗专讗讙讜讗讛"
+msgid "Ghana"
+msgstr "讙讗谞讛"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Nigeria"
-msgstr "谞讬讙专讬讛"
+msgid "Path or Module required"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Norfolk Island"
+msgid "Advanced Options"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Niger"
-msgstr "谞讬讙专"
+msgid "Coma bug"
+msgstr "讘讗讙 转专讚诪转"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "New Caledonia"
-msgstr "拽诇讚讜谞讬讛 讛讞讚砖讛"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Namibia"
-msgstr "谞诪讬讘讬讛"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mozambique"
-msgstr "诪讜讝诪讘讬拽"
+msgid "There was an error installing packages:"
+msgstr "讛转专讞砖讛 砖讙讬讗讛 讘讛转拽谞转 讛讞讘讬诇讜转:"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Malaysia"
-msgstr "诪诇讝讬讛"
+msgid "Lexmark inkjet configuration"
+msgstr "讛讙讚专转 Lexmark inkjet"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Mexico"
-msgstr "诪拽住讬拽讜"
+msgid "Undo"
+msgstr "讘讟诇"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Malawi"
-msgstr "诪诇讗讜讜讬"
+msgid "Save partition table"
+msgstr "砖诪讜专 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Maldives"
-msgstr "讛讗讬讬诐 讛诪诇讚讬讘讬讬诐"
+msgid "Finnish"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mauritius"
-msgstr "诪讗讜专讬爪讬讜住"
+msgid "Macedonia"
+msgstr "诪拽讚讜谞讬讛"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Malta"
-msgstr "诪诇讟讛"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"讛砖讬转讜祝 诇-诪砖转诪砖, 诪砖转诪砖 讘拽讘讜爪讛 \"砖讬转讜祝-拽讘爪讬诐\".\n"
+"讘讬讻讜诇转讱 诇讛砖转诪砖 讘注讜专讱 讛诪砖转诪砖讬诐 讻讚讬 诇讛讜住讬祝 诪砖转诪砖 诇拽讘讜爪讛 讝讜."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Montserrat"
-msgstr "诪讜谞住专讗讟"
+msgid "Slovenian"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Mauritania"
-msgstr "诪讗讜专讬讟谞讬讛"
+msgid "Libya"
+msgstr "诇讬讘专讬讛"
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Martinique"
-msgstr "诪专讟讬谞讬拽"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Northern Mariana Islands"
+msgid ""
+"\n"
+"- Burn to CD"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Mongolia"
-msgstr "诪讜谞讙讜诇讬讛"
+msgid "Table"
+msgstr "砖讜诇讞谉"
-#: ../../lang.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Myanmar"
-msgstr "诪讬讗谞诪专"
+msgid "I don't know how to format %s in type %s"
+msgstr "诇讗 讬讚讜注 诇讬 讗讬讱 诇驻专诪讟 讗转 %s 诪住讜讙 %s"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Mali"
-msgstr "诪讗诇讬"
+msgid "Model"
+msgstr "诪讜讚诇"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Macedonia"
-msgstr "诪拽讚讜谞讬讛"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Marshall Islands"
+msgid "Stop Server"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Madagascar"
-msgstr "诪讚讙住拽专"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"讘讞讬专转 注专讻转 谞讜砖讗\n"
+"诇lilo 讜bootsplash,\n"
+"讘讗驻砖专讜转 诇讘讞讜专 注专讻转\n"
+" 谞讜砖讗 谞驻专讚转 诇讻诇 讗讞讚 诪讛诐"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Moldova"
-msgstr "诪讜诇讚讜讘讛"
+msgid "Modem"
+msgstr "诪讜讚诐"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Monaco"
-msgstr "诪讜谞拽讜"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Morocco"
-msgstr "诪专讜拽讜"
+msgid "Tuvalu"
+msgstr "讟讜讘讗诇讜"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Libya"
-msgstr "诇讬讘专讬讛"
+msgid "Use auto detection"
+msgstr "砖讬诪讜砖 讘讝讬讛讜讬 讗讜讟讜诪讟讬"
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Latvia"
-msgstr "诇讟讜讜讬讛"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Luxembourg"
-msgstr "诇讜讻住诪讘讜专讙"
+msgid "Started on boot"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Lithuania"
-msgstr "诇讬讟讗"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"讛爪转专祝 诇拽讘讜爪转 讛转诪讬讻讛 砖诇 MandrakeSoft 讘砖讘讬诇 诇砖转祝 讗转 讛讬讚注 砖诇讱 讜诇注讝讜专 诇诪讬砖转诪砖讬诐 "
+"讗讞专讬诐 讜转讛驻讱 诇讛讬讜转 诪讜诪讞讛 讗转专 讛转诪讬讻讛 讛转讻谞讬转"
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Lesotho"
-msgstr "诇住讜讟讜"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Liberia"
-msgstr "诇讬讘专讬讛"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Sri Lanka"
-msgstr "住专讬 诇谞拽讛"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Liechtenstein"
-msgstr "诇讬讻讟谞砖讟讬讬谉"
+msgid "East Timor"
+msgstr "诪讝专讞 讟讬诪讜专"
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Saint Lucia"
-msgstr "住谞讟 诇讜爪~讬讛"
+msgid "Del profile..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Lebanon"
-msgstr "诇讘谞讜谉"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Laos"
-msgstr "诇讜讙讬诐"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Kazakhstan"
-msgstr "拽讝讞住讟谉"
+msgid "Installing Foomatic..."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid "Cayman Islands"
-msgstr "讗讬讬 拽讬讬诪讗谉"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Kuwait"
-msgstr "讻讜讜讬转"
+msgid "detected"
+msgstr "讝讜讛讛"
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Korea"
-msgstr "拽讜专讗讛"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "讛专砖转 爪专讬讻讛 诇讗转讞诇 诪讞讚砖. 讛讗诐 讘专爪讜谞讱 诇转转 诇讛 诇讛转讗转讞诇?"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Korea (North)"
+msgid "Package: "
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "住谞讟 拽讬讟住 谞讜讜讬诐"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "诇讗 讬讻讜诇 诇讻转讜讘 讗诇 /etc/sysconfig/bootsplash."
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Comoros"
-msgstr "讗讬讬 拽讜诪讜专讜"
+msgid "SECURITY WARNING!"
+msgstr "讗讝讛专转 讘讬讟讞讜谉!"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Kiribati"
+msgid "StarOffice"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Cambodia"
-msgstr "拽诪讘讜讚讬讛"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Kyrgyzstan"
-msgstr "拽讬专讙讬住讟谉"
+msgid "No, I don't want autologin"
+msgstr "诇讗, 诇讗 专讜爪讛 讻谞讬住讛 讗讜讟讜诪讟讬转"
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Kenya"
-msgstr "拽谞讬讛"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Japan"
-msgstr "讬驻谉"
+msgid "All languages"
+msgstr "讻诇 讛砖驻讜转"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Jordan"
-msgstr "讬专讚谉"
+msgid "Removing %s"
+msgstr "诪住讬专 讗转 %s"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Jamaica"
-msgstr "讙~诪讬讬拽讛"
+msgid "Testing your connection..."
+msgstr "讘讜讚拽 讗转 讛诪注专讻转 砖诇讱..."
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Iceland"
-msgstr "讗讬住诇谞讚"
+msgid "Cache size"
+msgstr "讙讜讚诇 诪讟诪讜谉"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Iran"
-msgstr "讗讬专谉"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Iraq"
-msgstr "注讬专拽"
+msgid "Start sector: "
+msgstr "住拽讟讜专 讛转讞诇讛:"
#: ../../lang.pm:1
#, c-format
-msgid "British Indian Ocean Territory"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid "India"
-msgstr "讛讜讚讜"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "讛讞讘讬诇讛 %s 讚专讜砖讛 诇讛讬讜转 诪讜转拽谞转. 讛讗诐 讘专爪讜谞讱 诇讛转拽讬谞讛?"
#: ../../lang.pm:1
#, c-format
-msgid "Israel"
-msgstr "讬砖专讗诇"
+msgid "Seychelles"
+msgstr "讗讬讬 住讬讬砖诇"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ireland"
-msgstr "讗讬专诇谞讚"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Indonesia"
-msgstr "讗讬谞讚讜谞讝讬讛"
+msgid "Bad password on %s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Hungary"
-msgstr "讛讜谞讙专讬讛"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"讬砖 诪讚驻住转 讗讞转 诇讗 讬讚讜注讛 讛诪讞讜讘专转 诇诪注专讻转 砖诇讱"
#: ../../lang.pm:1
#, c-format
-msgid "Haiti"
-msgstr "讛讗讬讟讬"
+msgid "Zambia"
+msgstr "讝诪讘讬讛"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Croatia"
-msgstr "拽专讜讗讟讬讛"
+msgid "Security Administrator (login or email)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Honduras"
-msgstr "讛讜谞讚讜专住"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "住诇讬讞讛, 讛转诪讬讻讛 讛讬讗 讘讙专注讬谞讬 2.4 讘诇讘讚."
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "讗讬讬 拽讬讬拽讜住"
+msgid "Romanian (qwerty)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Hong Kong"
-msgstr "讛讜谞讙 拽讜谞讙"
+msgid "Under Devel ... please wait."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "China"
-msgstr "住讬谉"
+msgid "Czech Republic"
+msgstr "讛专驻讜讘诇讬拽讛 讛爪~讻讬转"
#: ../../lang.pm:1
#, c-format
-msgid "Guyana"
-msgstr "讙讬讗谞讛"
+msgid "Egypt"
+msgstr "诪爪专讬讬诐"
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Guinea-Bissau"
-msgstr "讙讬谞讬讗讛 讘讬住讗讜"
+msgid "Old configuration (isdn4net)"
+msgstr "讛讙讚专讛 讬砖谞讛 (isdn4net)"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Guam"
-msgstr "讙讜讗诐"
+msgid "Sound card"
+msgstr "讻专讟讬住 拽讜诇"
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Guatemala"
-msgstr "讙讜讗讟诪诇讛"
+msgid "Import Fonts"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Equatorial Guinea"
-msgstr "讙讬谞讬讗讛 讛诪砖讜讜谞讬转"
+msgid "Suppress Temporary Files"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Guadeloupe"
-msgstr "讙讜讜讗讚诇讜驻"
+msgid "Change partition type"
+msgstr "砖谞讛 住讜讙 诪讞讬爪讛"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Guinea"
-msgstr "讙讬谞讗讛"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Gambia"
-msgstr "讙诪讘讬讛"
+msgid "Network Options"
+msgstr "讗驻砖专讜讬讜转 专砖转"
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Greenland"
-msgstr "讙专讬谞诇谞讚"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"讛爪讙转 注专讻转 谞讜砖讗\n"
+"转讞转 诪住讜祝"
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Gibraltar"
-msgstr "讙~讬讘专诇讟专"
+msgid "Statistics"
+msgstr "住讟讟讬住讟讬拽讛"
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "Ghana"
-msgstr "讙讗谞讛"
+msgid "(on %s)"
+msgstr "(注诇 %s)"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "French Guiana"
-msgstr "讙讬讗谞讛 讛爪专驻转讬转"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Georgia"
-msgstr "讙~讜专讙~讬讛"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Grenada"
-msgstr "讙专谞讚讛"
+msgid "average"
+msgstr "诪诪讜爪注"
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "United Kingdom"
-msgstr "讘专讬讟谞讬讛"
+msgid "New printer name"
+msgstr "砖诐 讛诪讚驻住转 讛讞讚砖讛"
#: ../../lang.pm:1
#, c-format
-msgid "Gabon"
-msgstr "讙讘讜谉"
+msgid "Equatorial Guinea"
+msgstr "讙讬谞讬讗讛 讛诪砖讜讜谞讬转"
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Faroe Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Micronesia"
-msgstr "诪讬拽专讜谞讝讬讛"
+msgid "Build Backup"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "讗讬讬 驻讜拽诇谞讚 "
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"讻讚讬 诇讛讚驻讬住 拽讜讘抓 诪砖讜专转 讛驻拽讜讚讛 (讛诪注讟驻转) 讬砖 诇讛砖转诪砖 讘驻拽讜讚讛 \"%s <file>\" or \"%s "
+"<file>\".\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Fiji"
-msgstr "驻讬讙~讬"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Finland"
-msgstr "驻讬谞诇谞讚"
+msgid "Romanian (qwertz)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ethiopia"
-msgstr "讗转讬讜驻讬讛"
+msgid "Write Config"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Spain"
-msgstr "住驻专讚"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Eritrea"
-msgstr "讗专讬转专讬讗讛"
+msgid "Kiribati"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Western Sahara"
-msgstr "住讛专讛 讛诪注专讘讬转"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Egypt"
-msgstr "诪爪专讬讬诐"
+msgid "Browse"
+msgstr "住讬讬专"
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Estonia"
-msgstr "讗住讟讜谞讬讛"
+msgid "CDROM"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Ecuador"
-msgstr "讗拽讜讜讚讜专"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇谞住讜转 诇讛转讞讘专 诇讗讬谞讟专谞讟 注讻砖讬讜?"
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Algeria"
-msgstr "讗诇讙~专讬讛"
+msgid "Belgian"
+msgstr "讘诇讙讬转"
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Dominican Republic"
-msgstr "讛专驻讜讘诇讬拽讛 讛讚讜诪讬谞讬拽谞讬转"
+msgid "Do you have an ISA sound card?"
+msgstr "讛讗诐 讬砖 诇讱 讻专讟讬住 拽讜诇 ISA?"
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Dominica"
-msgstr "讚讜诪讬谞讬拽讛"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Denmark"
-msgstr "讚谞诪专拽"
+msgid "Windows"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Djibouti"
-msgstr "讙~讬讘讜讟讬"
+msgid "Can't make screenshots before partitioning"
+msgstr "诇讗 讬讻讜诇 诇注砖讜转 转诪讜谞讜转 诪住讱 诇驻谞讬 谞讬驻讜讬 诪讞讬爪讜转"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Cyprus"
-msgstr "拽驻专讬住讬谉"
+msgid "Host Name"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Christmas Island"
-msgstr "讗讬讬 讞址讙 讛址诪旨讜止诇指讚"
+msgid "/File/Save _As"
+msgstr "/拽讜讘抓/砖诪讬专讛 _讘砖诐"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cape Verde"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Cuba"
-msgstr "拽讜讘讛"
-
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Colombia"
-msgstr "拽讜诇讜诪讘讬讛"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s 诇讗 谞诪爪讗 讘诪讗讙专 讛谞转讜谞讬诐 砖诇 住讜专拽讬诐, 专讜爪讛 诇讛讙讚讬专 讝讗转 诇讘讚?"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Cameroon"
-msgstr "拽诪专讜谉"
+msgid "Delay before booting default image"
+msgstr "讛诪转谞讛 诇驻谞讬 讗转讞讜诇 诪注专讻转 讘专讬专转 讛诪讞讚诇"
-#: ../../lang.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Chile"
-msgstr "爪~讬诇讛"
+msgid "Restrict command line options"
+msgstr "讛讙讘诇转 讗驻砖专讜讬讜转 砖讜专转 讛驻拽讜讚讛"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Cook Islands"
+msgid "East Europe"
msgstr ""
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Cote d'Ivoire"
-msgstr "讞讜祝 讛砖谞讛讘"
+msgid "Use free space"
+msgstr "砖讬诪讜砖 讘砖讟讞 讛讞讜驻砖讬"
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid "Switzerland"
-msgstr "砖讜讜讬祝"
+msgid "use dhcp"
+msgstr "砖讬诪讜砖 讘 dhcp"
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
+msgid "Mail alert"
+msgstr "讛转专讗讜转 讚讜讗诇"
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Central African Republic"
-msgstr "讛专驻讜讘诇讬拽讛 讛诪专讻讝-讗驻专讬拽讗讬转"
+msgid "Internet configuration"
+msgstr "讛讙讚专转 专砖转"
#: ../../lang.pm:1
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
+msgid "Uzbekistan"
+msgstr "讗讜讝讘拽讬住讟谉"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid "Detected %s"
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Canada"
-msgstr "拽谞讚讛"
-
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Belize"
-msgstr "讘诇讬讝"
+msgid "/Autodetect _printers"
+msgstr "/讝讬讛讜讬 _诪讚驻住讜转 讗讜讟讜诪讟讬"
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "Belarus"
-msgstr "讘诇专讜住"
+msgid "Finish"
+msgstr "住讬讜诐"
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Botswana"
-msgstr "讘讜讟住讜讗谞讛"
+msgid "Show automatically selected packages"
+msgstr "讛专讗讛 讞讘讬诇讜转 砖谞讘讞专讜 讗讜讟讜诪讟讬转"
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Bouvet Island"
-msgstr ""
+msgid "CPU flags reported by the kernel"
+msgstr "讚讙诇讬 诪注讘讚 诪讚讜讜讞讬诐 注诇 讬讚讬 讛讙专注讬谉"
#: ../../lang.pm:1
#, c-format
-msgid "Bhutan"
-msgstr "讘讛讜讟谉"
+msgid "Togo"
+msgstr "讟讜讙讜"
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Bahamas"
-msgstr "讗讬讬 讘讛讗诪讛"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Brazil"
-msgstr "讘专讝讬诇"
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bolivia"
-msgstr "讘讜诇讬讘讬讛"
+msgid "Please try again"
+msgstr "讗谞讗 谞住讛 砖讜讘"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Brunei Darussalam"
-msgstr ""
+msgid "The model is correct"
+msgstr "讛诪讜讚诇 谞讻讜谉"
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Bermuda"
-msgstr "讘专诪讜讚讛"
+msgid "FAT resizing failed: %s"
+msgstr "砖讬谞讜讬 讙讜讚诇 诇FAT 谞讻砖诇: %s"
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Benin"
-msgstr "讘讬谞谉(讚讛讜诪讬讬)"
+msgid "Individual package selection"
+msgstr "讘讞讬专转 讞讘讬诇讜转 讘讗讜驻谉 住驻爪讬驻讬"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Burundi"
-msgstr "讘讜专讜谞讚讬"
+msgid "This partition is not resizeable"
+msgstr "诇讗 谞讬转谉 诇砖谞讜转 讗转 讙讜讚诇讛讛 砖诇 诪讞讬爪讛 讝讜"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bahrain"
-msgstr "讘讞专讬讬谉"
+msgid "Location"
+msgstr "诪讬拽讜诐"
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Bulgaria"
-msgstr "讘讜诇讙专讬讛"
+msgid "USA (cable-hrc)"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Burkina Faso"
-msgstr "讘讜专拽讬谞讛 驻讗住讜"
+msgid "Journalised FS"
+msgstr "Journalised FS"
#: ../../lang.pm:1
#, c-format
-msgid "Bangladesh"
-msgstr "讘谞讙诇讚砖"
+msgid "Guatemala"
+msgstr "讙讜讗讟诪诇讛"
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Barbados"
-msgstr "讘专讘讚讜住"
+msgid "This machine"
+msgstr "诪注专讻转 讝讜"
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "讘讜住谞讬讛-讛专爪讙讜讘讬谞讛"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "讗讜转 讻讜谞谉 讚讜住: %s (诇驻讬 谞讬讞讜砖)\n"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Azerbaijan"
-msgstr "讗讝专讘讬讙~讗谉"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
#: ../../lang.pm:1
#, c-format
-msgid "Aruba"
-msgstr "讗专讜讘讛"
+msgid "Bahrain"
+msgstr "讘讞专讬讬谉"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Australia"
-msgstr "讗讜住讟专诇讬讛"
+msgid "omit scsi modules"
+msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "American Samoa"
-msgstr "住诪讜讗讛 讛讗诪专讬拽讗讬转"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "讛诪砖驻讞讛 砖诇 讛诪注讘讚 (讻诪讜 6 诇诪注讘讚讬 i686)"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Argentina"
-msgstr "讗专讙谞讟讬谞讛"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Antarctica"
-msgstr "讗谞讟讗专拽讟讬拽讛"
+msgid "Keyboard layout: %s\n"
+msgstr "驻诇讟 诪拽诇讚转: %s\n"
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Angola"
-msgstr "讗谞讙讜诇讛"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Netherlands Antilles"
+msgid "Maltese (US)"
msgstr ""
-#: ../../lang.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Armenia"
-msgstr "讗专诪谞讬讛"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Albania"
-msgstr "讗诇讘谞讬讛"
+msgid "Tvcard"
+msgstr "讻专讟讬住 讟诇讜讬讝讬讛"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Anguilla"
-msgstr "讗谞讙讜讜讬讛"
+msgid "Toggle between normal/expert mode"
+msgstr "注讘讜专 诇诪爪讘 专讙讬诇\"诪讜诪讞讛 "
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Antigua and Barbuda"
-msgstr "讗谞讟讬讙讛 讜讘专讘讜讚讛"
+msgid "Size"
+msgstr "讙讜讚诇"
-#: ../../lang.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "United Arab Emirates"
-msgstr "讗讬讞讜讚 讛谞住讬讻讜讬讜转 讛注专讘讬讜转"
+msgid "GRUB"
+msgstr "GRUB"
#: ../../lang.pm:1
#, c-format
-msgid "Andorra"
-msgstr "讗谞讚讜专讛"
+msgid "Greenland"
+msgstr "讙专讬谞诇谞讚"
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Afghanistan"
-msgstr "讗驻讙谞讬住讟谉"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "default:LTR"
-msgstr "default:RTL"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../loopback.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Circular mounts %s\n"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../lvm.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Remove the logical volumes first\n"
+msgid "Delete All NBIs"
msgstr ""
-#: ../../modules.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "谞讗 诇讛讝讬讝 讗转 讛讙诇讙诇转 砖诇讱!"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "To activate the mouse,"
-msgstr "诇讛驻注诇转 讛注讻讘专,"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "讗诇讜 讛讙讚专讜转 砖诇 XFree 讘专爪讜谞讱 诇拽讘诇?"
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please test the mouse"
-msgstr "谞讗 诇讘讚讜拽 讗转 讛注讻讘专"
+msgid "More"
+msgstr "注讜讚"
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "No mouse"
-msgstr "讗讬谉 注讻讘专"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"注诐 专诪转 讗讘讟讞讛 讝讜, 砖讬诪讜砖 讘诪注专讻转 讻砖专转 讗驻砖专讬转.\n"
+"讛讗讘讟讞讛 讙讘讜讛讛 诪住驻讬拽 诇砖讬诪讜专 讛诪注专讻转 讻砖专转 砖讬讻讜诇 诇拽讘诇\n"
+"讞讬讘讜专讬诐 诪诇拽讜讞讜转 专讘讬诐. 讗诐 讛诪注专讻转 砖诇讱 讛讬讗 诇拽讜讞 讗讬谞讟专谞讟 讘诇讘讚, 讻讚讗讬 诇讘讞讜专 讘诪讛 "
+"谞诪讜讻讛 讬讜转专."
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "none"
-msgstr "讻诇讜诐"
+msgid "Account Password"
+msgstr "住讬住诪讗转 讞砖讘讜谉"
-#: ../../mouse.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "3 buttons"
-msgstr "3 讻驻转讜专讬诐"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"讛讞诇讟转 诇讛转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转 注诇 诪讞讬爪讛.\n"
+"讝讛 专讜诪讝 砖讬砖 诇讱 讻讘专 讟讜注谉 诪注专讻转 注诇 讛讚讬住拽 讛拽砖讬讞 (诪注诇讛 诪注专讻转)\n"
+"\n"
+"讚专讱 讗讬讝讛 讻讜谞谉 讗转/讛 诪注诇讛 讗转 讛诪注专讻转? "
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "2 buttons"
-msgstr "2 讻驻转讜专讬诐"
+msgid "Tajik keyboard"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 button"
-msgstr "讻驻转讜专 讗讞讚"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "busmouse"
-msgstr "注讻讘专 bus"
+msgid "Font List"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "讛注讻讘专 讛讞讜砖讘 砖诇 Kensington"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "注讻讘专 logitech (住专讬讗诇讬, 诪住讜讙 C7 讬砖谉)"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Select file"
+msgstr "讬砖 诇讘讞讜专 拽讜讘抓"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Japan"
+msgstr "讬驻谉"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Print option list"
+msgstr "讛讚驻住转 专砖讬诪转 讗驻砖专讜讬讜转"
-#: ../../mouse.pm:1
+#: ../../standalone/localedrake:1
#, c-format
-msgid "Mouse Systems"
-msgstr "诪注专讻讜转 注讻讘专"
+msgid "The change is done, but to be effective you must logout"
+msgstr "讛砖讬谞讜讬 讛住转讬讬诐, 讗讱 讻讚讬 砖讬讛讬讛 讘注诇 诪砖诪注讜转 注诇讬讱 诇爪讗转"
-#: ../../mouse.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Search servers"
+msgstr "讞驻砖 砖专转讬诐"
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "NCP queue name missing!"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "注讻砖讘专 讻诇讬讬 注诐 3 诪拽砖讬诐"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr "讗讝讛专讛, 讞讬讘讜专 讗讬谞讟专谞讟 讗讞专 讝讜讛讛, 讗讜诇讬 诪砖转诪砖 讘专砖转 砖诇讱"
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "注讻讘专 讻诇诇讬 注诐 2 诪拽砖讬诐"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "讚讬住拽 讛诪住讜诪谉 \"%s\""
-#: ../../mouse.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "serial"
-msgstr "住专讬讗诇讬"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Microsoft Explorer"
-msgstr "诪讬拽专讜住讜驻讟 讗拽住驻诇讜专专"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"谞讻砖诇 讘讘讚讬拽转 诪注专讻转 讛拽讘爪讬诐 %s. 讛讗诐 讘专爪讜谞讱 诇转拽谉 讗转 讛砖讙讬讗讜转? (注诇讜诇 诇讛讬谞讝拽 诪讬讚注)"
-#: ../../mouse.pm:1
+#: ../../share/advertising/07-server.pl:1
#, c-format
-msgid "Wheel"
-msgstr "注诐 讙诇讙诇转"
+msgid "Turn your computer into a reliable server"
+msgstr "讛驻讬讻转 讛诪讞砖讘 诇砖专转 讗诪讬谉"
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Generic"
-msgstr "讻诇诇讬"
+msgid " (driver %s)"
+msgstr "(诪谞讛诇 讛转拽谉 %s)"
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "I don't know"
+msgstr "诇讗 讬讚讜注"
-#: ../../mouse.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "讻诇诇讬 - 注讻讘专 PS2 注诐 讙诇讙诇转"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", 诪讗专讞 TCP/IP \"%s\", 驻讜专讟 %s"
-#: ../../mouse.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid ""
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
+msgstr ""
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Standard"
-msgstr "住讟谞讚专讟讬"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"讻专讟讬住 讛拽讜诇 砖诇讱 诪砖转诪砖 讻专讙注 讘诪谞讛诇 讛讛转拽谉 %s\"%s\" (讘专讬专转 诪讞讚诇 诇诪谞讛诇 讛转拽谉 "
+"诇讻专讟讬住讱 \"%s\")"
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Sun - Mouse"
-msgstr "注讻讘专 - Sun"
+msgid "Post Uninstall"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr ""
+msgid " ("
+msgstr " ("
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Collapse Tree"
-msgstr "讚讞讜住 注抓"
+msgid "Cpuid level"
+msgstr "专诪转 Cpuid"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Expand Tree"
-msgstr "驻专讜住 注抓"
+msgid "Mongolian (cyrillic)"
+msgstr ""
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Info"
-msgstr "诪讬讚注"
+msgid "Add a module"
+msgstr "讛讜住驻转 诪讜讚讜诇"
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Is this correct?"
-msgstr "讛讗诐 讝讛 谞讻讜谉?"
+msgid "Profile to delete:"
+msgstr ""
-#: ../../my_gtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Local measure"
+msgstr "诪讚讚 诪拽讜诪讬"
-#: ../../partition_table.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Error writing to file %s"
-msgstr "砖讙讬讗讛 讘讻转讬讘讛 诇拽讜讘抓 %s"
+msgid "busmouse"
+msgstr "注讻讘专 bus"
-#: ../../partition_table.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Bad backup file"
-msgstr "拽讜讘抓 讙讬讘讜讬 讙专讜注"
+msgid "Account Login (user name)"
+msgstr "讻谞讬住讛 诇讞砖讘讜谉 (砖诐 诪砖转诪砖)"
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "砖讞讝u专 诪转讜讱 拽讜讘抓 %s 谞讻砖诇: %s"
+msgid "Fdiv bug"
+msgstr "讘讗讙 Fdiv"
-#: ../../partition_table.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-"讬砖 诇讱 讞讜专 讘砖讜诇讞谉 讛诪讞讬爪讜转 砖诇讱 讗讱 讗讬谞讬 讬讻讜诇 诇讛砖转诪砖 讘讜.\n"
-"讛驻转专讜谉 讛讬讞讬讚讬 讛讜讗 诇讛讝讬讝 讗转 讛诪讞讬爪讛 讛专讗砖讬转 讻讚讬 诇拽讘诇 讗转 讛讞讜专\n"
-"诇讬讬讚 讛诪讞讬爪讜转 讛谞诇讜讜转."
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "讛专讞讘转 诪讞讬爪讛 诇讗 谞转诪讻转 讘驻诇讟驻讜专诪讛 讛讝讗转"
+msgid "Benin"
+msgstr "讘讬谞谉(讚讛讜诪讬讬)"
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mount failed: "
-msgstr "讞讬讘讜专 谞讻砖诇:"
+msgid "Uruguay"
+msgstr "讗讜专讜讙讜讜讗讬"
-#: ../../pkgs.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "maybe"
-msgstr "讗讜诇讬"
+msgid "Path selection"
+msgstr "讘讞讬专转 诪讬拽讜诐 转讬拽讬讬讛"
-#: ../../pkgs.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "nice"
-msgstr "讬驻讛"
+msgid "Name/IP address of host:"
+msgstr "砖诐/讻转讜讘转 IP 砖诇 讛诪讗专讞:"
-#: ../../pkgs.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "very nice"
-msgstr "讬驻讛 诪讗讜讚"
+msgid "Monitor: %s\n"
+msgstr "诪住讱: %s\n"
-#: ../../pkgs.pm:1
+#: ../../partition_table/raw.pm:1
#, c-format
-msgid "important"
-msgstr "讞砖讜讘"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "must have"
-msgstr "讞讬讬讘 诇讛讬讜转"
+msgid "Printer host name or IP missing!"
+msgstr ""
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "讗讬谉 诪住驻讬拽 诪讞讬爪讜转 讘砖讘讬诇 砖诇讘 讛RAID %d\n"
+msgid "Please check all users that you want to include in your backup."
+msgstr ""
-#: ../../raid.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "mkraid failed"
-msgstr "谞讻砖诇 mkraid"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
+"讛 %s 讞讬讬讘 诇讛讬讜转 诪讜讙讚专 注诇 讬讚讬 printerdrake.\n"
+"讘讗驻砖专讜转讱 诇讛驻注讬诇 讗转 printerdrake 诪诪专讻讝 讛讘拽专讛 砖诇 诪谞讚专讬讬拽 讘诪讚讜专 讞讜诪专讛."
-#: ../../raid.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "谞讻砖诇 mkraid (讗讜诇讬 讻诇讬 raid 讞住专讬诐?)"
+msgid "Bangladesh"
+msgstr "讘谞讙诇讚砖"
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
+msgid "Japan (cable)"
+msgstr "讬驻谉 (讻讘诇讬诐)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Stop"
-msgstr "注爪讬专讛"
+msgid "Initial tests"
+msgstr ""
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Start"
-msgstr "讛转讞诇讛"
+msgid "Continue"
+msgstr "讛诪砖讱"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "On boot"
-msgstr "讘讝诪谉 讗转讞讜诇"
+msgid "Custom Restore"
+msgstr "讛转讗诪讛 讗讬砖讬转 砖诇 砖讞讝讜专"
-#: ../../services.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"No additional information\n"
-"about this service, sorry."
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-"诪爪讟注专, 讗讬谉 诪讬讚注 \n"
-"谞讜住祝 注诇 砖讬专讜转 讝讛."
+"\"%s\": 讗诐 讻专讟讬住 拽讜诇 诪讜讝讛讛 讘诪注专讻转 砖诇讱, 讝讛 诪讜爪讙 讻讗谉.\n"
+"讗诐 砖诪转 诇讘 砖讛讻专讟讬住 讛拽讜诇 砖诪讜爪讙 讗讬谞讜 讻专讟讬住 讛拽讜诇 砖诇讱, 讘讗驻砖专讜转讱,\n"
+"诇诇诇讞讜抓 注诇 讛讻驻转讜专 讜诇讘讞讜专 诪谞讛诇-讛转拽谉 讗讞专."
-#: ../../services.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Services and deamons"
+msgid "Script-based"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "stopped"
-msgstr "谞注爪专"
+msgid "Error reading file %s"
+msgstr "砖讙讬讗讛 讘拽专讬讗转 讛拽讜讘抓 %s"
-#: ../../services.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "running"
-msgstr "专抓"
+msgid "PLL setting:"
+msgstr ""
-#: ../../services.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "讬砖 诇讘讞讜专 讗讬诇讜 砖讬专讜转讬诐 讬注诇讜 讗讜讟讜诪讟讬转 讘讝诪谉 讗转讞讜诇 讛诪讞砖讘"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "FAT"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Database Server"
+msgid " on "
msgstr ""
-#: ../../services.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "Remote Administration"
+msgid "The URL must begin with http:// or https://"
+msgstr "砖诐 讛讗转专 讞讬讬讘 诇讛转讞讬诇 讘http:// 讗讜 讘https://"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-#: ../../services.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "File sharing"
-msgstr "砖讬转讜祝 拽讘爪讬诐"
+msgid "Other OS (SunOS...)"
+msgstr "诪注专讻转 讛驻注诇讛 讗讞专转 (SunOS...)"
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Internet"
-msgstr "讗讬谞讟专谞讟"
+msgid "Install/Upgrade"
+msgstr "讛转拽谞讛/注讚讻讜谉"
-#: ../../services.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Printing"
-msgstr "讛讚驻住讛"
+msgid "%d packages"
+msgstr "%d 讞讘讬诇讜转"
-#: ../../services.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "诪转讞讬诇 讗转 砖专转 讛驻讜谞讟讬诐 砖诇 (讝讛 讚讘专 讘住讬住讬 诇Xfree 讻讚讬 诇专讜抓)"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
+msgstr ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : 砖诪讬专转 转讬拽讬讬讜转 讘专讬专转 诪讞讚诇\n"
+"--debug : 讛爪讙转 讗转 讻诇 讛讜讚注讜转 讛讚讬讘讜讙\n"
+"--show-conf : 专砖讬诪转 砖诇 拽讘爪讬诐 讜转讬拽讬讬讜转 诇讙讬讘讜讬\n"
+"--config-info : 讛住讘专 注诇 讗驻砖专讜讬讜转 讛讙讚专转 拽讜讘抓 (for non-X users).\n"
+"--daemon : daemon 砖讬诪讜砖 讘讛讙讚专转 . \n"
+"--help : 讛爪讙转 诪住讱 讝讛.\n"
+"--version : 讛爪讙转 诪住驻专 讙讬专住讗.\n"
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "讟讜注谉 讗转 诪谞讛诇讬 讛讛转拽谉 诇讞讜诪专转 讛usb 砖诇讱."
+msgid "Domain Authentication Required"
+msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "讟讜注谉 讗转 诪注专讻转 讛拽讜诇 注诇 讛诪讞砖讘 砖诇讱"
+msgid "Costa Rica"
+msgstr "拽讜住讟讛 专讬拽讛"
-#: ../../services.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+msgid "Use libsafe for servers"
msgstr ""
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+msgid "Icelandic"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
msgstr ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
-#: ../../services.pm:1
+#: ../../standalone/XFdrake:1
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+msgid "Please relog into %s to activate the changes"
msgstr ""
-#: ../../services.pm:1
+#: ../../my_gtk.pm:1
#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-#: ../../services.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
+msgid "Lilo/grub mode"
+msgstr "诪爪讘 Lilo/grub "
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "Output"
msgstr ""
-#: ../../services.pm:1
+#: ../../loopback.pm:1
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "Circular mounts %s\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
+msgid "Martinique"
+msgstr "诪专讟讬谞讬拽"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
+msgid "HardDrive / NFS"
msgstr ""
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "讛讚诇拽 讗讜讟讜诪讟讬转 诪拽砖 numlock 讘诪注讟驻转 讜Xfree 讘讝诪谉 讛讗转讞讜诇."
+msgid "a number"
+msgstr "诪住驻专"
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
+msgid "Swedish"
+msgstr "砖讜讜讚讬转"
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
+msgid "Which %s driver should I try?"
+msgstr "讗讬讝讛 诪谞讛诇 讛转拽谉 %s 讗谞讬 爪专讬讱 诇谞住讜转?"
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "讬讚讜讜讞 诇讱 讗诐 讗讞讚 诪讛砖讬专讜转讬诐 讛谞讘讞专讬诐 诇讗 驻讜注诇 注讜讚"
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
+msgid "Filesystem types:"
+msgstr "住讜讙讬 诪注专讻讜转 拽讘爪讬诐:"
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
+msgid ", multi-function device on HP JetDirect"
+msgstr ", 讛转拽谉 专讘-讗驻砖专讜讬讜转 注诇 HP JetDirect"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+msgid "Northern Mariana Islands"
msgstr ""
-"砖专转 讜讬专讟讜讗诇讬 砖诇 诇讬谞讜拽住, 诪砖讜诪砖 讻讚讬 诇讘谞讜转 砖专转 讘注诇 讘讬爪讜注讬诐 讙讘讜讛讬诐 \n"
-"讜砖专转 讝诪讬谉."
-#: ../../services.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "none"
+msgstr "讻诇讜诐"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "user :"
+msgstr "诪砖转诪砖 :"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your password"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
msgstr ""
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "讝讬讛讜讬 讗讜讟讜诪讟讬 讜讛讙讚专转 讞讜诪专讛 讘讝诪谉 讗转讞讜诇."
+msgid "Floppy"
+msgstr "讚讬住拽讟"
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Please check if you want to erase your RW media (1st Session)"
msgstr ""
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "Ghostscript referencing"
msgstr ""
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
+msgid "Bootloader"
+msgstr "诪讗转讞诇 讛诪注专讻转"
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
+msgid "Move"
+msgstr "讛注讘专"
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
+msgid "Bootloader to use"
+msgstr "诪讗转讞诇 诪注专讻转 诇砖讬诪讜砖"
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr "讞讜诪专讚专讬讬拽 诪专讬爪讛 讞讬驻讜砖 讞讜诪专讛, 讜诪讗驻砖专转 诇讛讙讚讬专 讞讜诪专讛 讞讚砖讛/砖讛砖转谞转讛."
+msgid "SMB server host"
+msgstr "诪讗专讞 砖专转 SMB"
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "Name Servers:"
msgstr ""
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-"诪专讬抓 驻拽讜讚讜转 诇驻讬 讝诪谞讬诐 砖谞拽讘注讜 诇讛专爪转谉\n"
-"讜诪专讬抓 驻拽讜讚讜转 讗爪讜讛 讻讗砖专 讬砖 注讜诪住 诪注专讻转."
#: ../../services.pm:1
#, c-format
msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
+"砖专转 讜讬专讟讜讗诇讬 砖诇 诇讬谞讜拽住, 诪砖讜诪砖 讻讚讬 诇讘谞讜转 砖专转 讘注诇 讘讬爪讜注讬诐 讙讘讜讛讬诐 \n"
+"讜砖专转 讝诪讬谉."
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "转讜讻谞转 Anacron 讛讬讗 转讜讻谞转 诇讜讞 讝诪谞讬诐 诪讞讝讜专讬 驻拽讜讚转讬."
+msgid "4 billion colors (32 bits)"
+msgstr "4 诪诇讬讗专讚 爪讘注讬诐 (32 讘讬讟)"
-#: ../../services.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "讛专抓 讗转 诪注专讻转 拽讜诇 ALSA (讗专讻讬讟拽讟讜专转 拽讜诇 诪转拽讚诪转 诇诇讬谞讜拽住)"
+msgid "Micronesia"
+msgstr "诪讬拽专讜谞讝讬讛"
-#: ../../standalone.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Installing packages..."
-msgstr "诪转拽讬谉 讞讘讬诇讜转..."
+msgid "License"
+msgstr "讛住讻诐"
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "This may take a moment to generate the keys."
msgstr ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
-#: ../../standalone.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (using pppoa) usb"
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
-"[OPTION]...\n"
-" --no-confirmation 诇讗 诇讘拽砖 讗讬砖讜专 讘诪爪讘 注讚讻讜谉-诪谞讚专讬讬拽\n"
-" --no-verify-rpm 诇讗 诇讝讛讜转 讞转讬诪讜转 讞讘讬诇讜转\n"
-" --changelog-first 讛爪讙 诇讜讙-砖讬谞讜讬 诇驻谞讬 专砖讬诪转 讛拽讘爪讬诐 讘讞诇讜谉 讛转讬讗讜专\n"
-" --merge-all-rpmnew 砖谞诪爪讗讜 .rpmnew/.rpmsave 诪讬讜注讚 诇诪讝讙 讗转 讻诇 拽讘爪讬"
+"砖讙讬讗讛 讛转专讞砖讛 - 诇讗 谞诪爪讗讛 讞讜诪专讛 诇讬爪讬专转 诪注专讻转 拽讘爪讬诐 讞讚砖讛. 谞讗 诇讘讚讜拽 讗转 讛讞讜诪专讛 "
+"砖讙专诪讛 诇讘注讬讛"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Starting the printing system at boot time"
+msgstr "诪转讞讬诇 讗转 诪注专讻转 讛讛驻注诇讛 讘讝诪谉 讗转讞讜诇"
-#: ../../standalone.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : 讛爪讙 诪诪砖拽 讝讛 讻讘专讬专转 诪讞讚诇\n"
-"--connect : 讛转讞讘专 诇讗讬谞讟专谞讟 讗诐 诇讗 诪讞讜讘专 讻讘专--disconnect : 讛转谞转拽 诪讛讗讬谞讟专谞讟 讗诐 "
-"诪讞讜讘专 讻讘专\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : 讛讞讝专 1 讗诐 诪讞讜讘专, 0 讗讞专转--quiet : 诇驻注讜诇 讘爪讜专讛 讘诇转讬 讗讬谞讟专拽讟讬讘讬转"
+msgid "Do you want to start the connection at boot?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讛转讞讬诇 讗转 讛讛转讞讘专讜转 讘讝诪谉 讛讗转讞讜诇?"
-#: ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Processor ID"
+msgstr "诪讝讛讛 诪注讘讚"
-#: ../../standalone.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "[keyboard]"
-msgstr "[诪拽诇讚转]"
+msgid "Sound trouble shooting"
+msgstr "驻转讬专转 讘注讬讜转 拽讜诇"
-#: ../../standalone.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+msgid "Polish (qwerty layout)"
msgstr ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : MTS 讗讬驻砖讜专\n"
-"--disable : MTS 讘讬讟讜诇\n"
-"--start : MTS 讛转讞诇转\n"
-"--stop : MTS 注爪讬专转\n"
-"--adduser : MTS 讛讜住驻转 诪砖转诪砖 诪注专讻转 拽讬讬诐 诇 (requires username)\n"
-"--deluser : MTS 诪讞讬拽转 诪砖转诪砖 拽讬讬诐 诪(requires username)\n"
-"--addclient : MTS 讛讜住驻转 诪讞砖讘 诇拽讜讞 诇 (requires MAC address, IP, nbi "
-"image name)\n"
-"--delclient : MTS 诪讞讬拽转 诪讞砖讘 诇拽讜讞 诪(requires MAC address, IP, nbi image "
-"name)"
-#: ../../standalone.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+msgid "activate now"
msgstr ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : 讬讘讜讗 讻诇 诪讞讬爪讜转 讞诇讜谞讜转 讛讝诪讬谞讜转\n"
-"--xls_fonts : xls 讛爪讙转 讻诇 讛驻讜谞讟讬诐 砖讻讘专 拽讬讬诪讬诐 讘\n"
-"--strong : 讗讬诪讜转 讞讝拽 砖诇 驻讜谞讟.\n"
-"--install : 拽讘诇转 讻诇 拽讜讘抓 驻讜谞讟 讗讜 转讬拽讬讬讛.\n"
-"--uninstall : 讛住专转 讻诇 驻讜谞讟 讗讜 讻诇 转讬拽讬讬讛 砖诇 讛驻讜谞讟.\n"
-"--replace : 讛讞诇驻转 讻诇 驻讜谞讟 讗诐 拽讬讬诐 讻讘专\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
-"OPTIONS:\n"
-" --help - 讛爪讙 讛讜讚注转 注讝专讛 讝讜\n"
-" --report - 讛转讜讻谞讛 爪专讬讻讛 诇讛讬讜转 讗讞讚 诪讻诇讬 诪谞讚专讬讬拽\n"
-" --incident - 讛转讜讻谞讛 爪专讬讻讛 诇讛讬讜转 讗讞讚 诪讻诇讬 诪谞讚专讬讬拽"
-
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
+"Drakbackup activities via CD:\n"
"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : 砖诪讬专转 转讬拽讬讬讜转 讘专讬专转 诪讞讚诇\n"
-"--debug : 讛爪讙转 讗转 讻诇 讛讜讚注讜转 讛讚讬讘讜讙\n"
-"--show-conf : 专砖讬诪转 砖诇 拽讘爪讬诐 讜转讬拽讬讬讜转 诇讙讬讘讜讬\n"
-"--config-info : 讛住讘专 注诇 讗驻砖专讜讬讜转 讛讙讚专转 拽讜讘抓 (for non-X users).\n"
-"--daemon : daemon 砖讬诪讜砖 讘讛讙讚专转 . \n"
-"--help : 讛爪讙转 诪住讱 讝讛.\n"
-"--version : 讛爪讙转 诪住驻专 讙讬专住讗.\n"
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-"转讜讻谞讛 讝讜 讛讬讗 转讜讻谞讛 讞讜驻砖讬转; 讘讗驻砖专讜转讱 诇砖谞讜转讛 讗讜 诇讛驻讬爪讛 讗讜转讛 诪讞讚砖 转讞转 专砖讬讜谉\n"
-"讛GPL 讘讙讬专住讗 2 讗讜 讙讬专住讗 诪讗讜讞专转 讬讜转专.\n"
-"讛讗讞专讬讜转 注诇 砖讬诪讜砖 讘转讜讻谞讛 讝讜 讞诇讛 注诇 讛诪砖转诪砖 讘诇讘讚.\n"
-"注诇讬讱 诇拽讘诇 注讜转拽 砖诇 GPL 注诐 转讜讻谞讬转 讝讜; 讗诐 诇讗 讻讱 讛讚讘专, 讬砖 诇讻转讜讘 讗诇\n"
-"Free software Foundation, \n"
-" Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "讬爪讬讗讛 诪讛讛转拽谞讛"
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "讛转拽谞转 注讚讻讜谞讬 诪注专讻转"
-
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configure services"
-msgstr "讛讙讚专转 砖讬专讜转讬诐"
+msgid "Host \"%s\", port %s"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Configure X"
-msgstr "讛讙讚专转 X"
+msgid "This partition can't be used for loopback"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Install bootloader"
-msgstr "讛转拽谞转 讟讜注谉 讛诪注专讻转"
+msgid "File already exists. Use it?"
+msgstr "拽讜讘抓 讝讛 拽讬讬诐 讻讘专. 诇讛砖转诪砖 讘讜?"
-#: ../../steps.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Configure networking"
-msgstr "讛讙讚专转 讛专砖转"
+msgid "received: "
+msgstr "讛转拽讘诇讜:"
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Add a user"
-msgstr "讛讜住驻转 诪砖转诪砖"
+msgid "Right Alt key"
+msgstr "诪拽砖 Alt 讛讬诪谞讬"
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Root password"
-msgstr "住讬住诪转 诪砖转诪砖-注诇"
+msgid "the list of alternative drivers for this sound card"
+msgstr "讛专砖讬诪讛 砖诇 讛转拽谞讬诐 讗诇讟专谞讟讬讘讬诐 诇讻专讟讬住 拽讜诇 讛讝讛"
-#: ../../steps.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Install system"
-msgstr "讛转拽谞转 讛诪注专讻转"
+msgid "Gateway"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Choose packages to install"
-msgstr "谞讗 诇讘讞讜专 讞讘讬诇讜转 诇讛转拽谞讛"
+msgid "Scanner sharing"
+msgstr "砖讬转讜祝 住讜专拽"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Format partitions"
-msgstr "驻讬专诪讜讟 诪讞讬爪讜转"
+msgid "Tonga"
+msgstr "讟讜谞讙讛"
-#: ../../steps.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Partitioning"
-msgstr "诪讬讞讜抓"
+msgid "Tunisia"
+msgstr "讟讜谞讬住讬讛"
-#: ../../steps.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Choose your keyboard"
-msgstr "讘讞讬专转 讛诪拽诇讚转 砖诇讱"
+msgid "Profile: "
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select installation class"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Hard drive detection"
-msgstr "讝讬讛讜讬 讚讬住拽 拽砖讬讞"
+msgid "XawTV isn't installed!"
+msgstr "XawTV 诇讗 诪讜转拽谉!"
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Configure mouse"
-msgstr "讛讙讚专转 注讻讘专"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "License"
-msgstr "讛住讻诐"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../steps.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Language"
-msgstr "讘讞讬专转 砖驻讛"
+msgid "old static device name used in dev package"
+msgstr "砖诐 讛讛转拽谉 讛住讟讟讬 讛讬砖谉 讘砖讬诪讜砖 讘dev package"
-#: ../../ugtk2.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid "This label is already used"
+msgstr "讛转讜讜讬转 讛讝讗转 讻讘专 讘砖讬诪讜砖"
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "OK"
-msgstr "讗讬砖讜专"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "logdrake"
-msgstr "诇讜讙讚专讬讬拽"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "讗讞专讬 驻专诪讜讟 诪讞讬爪转 %s, 讻诇 讛诪讬讚注 讘诪讞讬爪讛 讝讜 讬讗讘讚"
-#: ../../ugtk.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Connection Time: "
+msgstr "讝诪谉 讞讬讘讜专:"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (讛转拽谞转 诪谞讛诇 讛转拽谉 诇转爪讜讙讛)"
+msgid "select perm file to see/edit"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/livedrake:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
-"讛讻专讟讬住 砖诇讱 转讜诪讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 注诐 XFree %s,\n"
-"讝讛讬专讜转: 讝讜讛讬 讙讬专住讛 谞住讬讜谞讬转 讛注诇讜诇讛 诇转拽讜注 诇讱 讗转 讛诪讞砖讘."
+"谞讗 诇讛讻谞讬住 讗转 讚讬住拽 讛讛转拽谞讛 讘讻讜谞谉 砖诇讱 讜诇诇讞讜抓 讗讬砖讜专 诇讗讞专 诪讻谉.\n"
+"讗诐 讗讬谉 诇讱 讗讜转讜, 讬砖 诇诇讞讜抓 讘讬讟讜诇 讻讚讬 诇讛诪谞注 诪注讚讻讜谉 讞讬讬."
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 注诐 讞讜诪专讛 诪讗讬爪转 转诇转 诪讬诪讚 谞住讬讜谞讬转"
+msgid "Use group id for execution"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 注诐 XFree %s."
+msgid "Choose the default user:"
+msgstr "讘讞专 诪砖转诪砖 讘专讬专转 诪讞讚诇: "
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 注诐 讞讜诪专讛 诪讗讬爪转 转诇转 诪讬诪讚 "
+msgid "Gabon"
+msgstr "讙讘讜谉"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
-"讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 专拽 注诐 XFree %s. \n"
-"讝讛讬专讜转: 讝讜讛讬 讙讬专住讛 谞住讬讜谞讬转 讛注诇讜诇讛 诇转拽讜注 诇讱 讗转 讛诪讞砖讘.\n"
-"讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 讚讜 诪讬诪讚 注诐 XFree %s. "
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
msgstr ""
-"讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 专拽 注诐 XFree %s.\n"
-"讻专讟讬住讱 谞转诪讱 注诇 讬讚讬 XFree %s 讗砖专 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 讚讜 诪讬诪讚讬转 讟讜讘讛 讬讜转专."
+"诇讬谞讜拽住 诪谞讚专讬讬拽 讬讻讜诇讛 诇转诪讜讱 讘专讬讘讜讬 砖驻讜转. 讘讞专\n"
+"讗转 讛砖驻讜转 砖讘专爪讜谞讱 诇讛转拽讬谉. 讛谉 讬讛讬讜 讝诪讬谞讜转 讻讗砖专\n"
+"转住讬讬诐 讗转 讛讛转拽谞讛 讜转驻注讬诇 诪讞讚砖 讗转 讛诪讞砖讘."
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "XFree %s"
+msgid "Domain"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "讝讻专讜谉 诪讚讜讬讬拽 讗诐 讚专讜砖 (谞诪爪讗讜 %d MB)"
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Use Xinerama extension"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Configure all heads independently"
+msgid "Provider dns 2 (optional)"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "讗诇讜 讛讙讚专讜转 砖诇 XFree 讘专爪讜谞讱 诇拽讘诇?"
+msgid "Boot device"
+msgstr "讛转拽谉 讗转讞讜诇"
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "XFree configuration"
-msgstr "讛讙讚专讜转 XFree"
+msgid "Which partition do you want to resize?"
+msgstr "诇讗讬讝讜 诪讞讬爪讛 讘专爪讜谞讱 诇砖谞讜转 讙讜讚诇?"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "讘讞专 讗转 讻诪讜转 讛讝讬讻专讜谉 砖诇 讻专讟讬住 讛诪住讱 砖诇讱"
+msgid "United States Minor Outlying Islands"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"讛诪注专讻转 砖诇讱 转讜诪讻转 讘讛讙讚专转 诪住驻专 专讗砖讬诐.\n"
-"诪讛 讘专爪讜谞讱 诇注砖讜转?"
+msgid "A tool to monitor your logs"
+msgstr "讻诇讬 诇讛爪讙转 诇讜讙讬诐"
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Multi-head configuration"
-msgstr "讛讙讚专转 诪住驻专-专讗砖讬诐"
+msgid "Djibouti"
+msgstr "讙~讬讘讜讟讬"
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Choose an X server"
-msgstr "讘讞专 砖专转 X"
+msgid "detected on port %s"
+msgstr "讝讜讛讛 讘驻讜专讟 %s"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "X server"
-msgstr "砖专转 X"
+msgid "LPD"
+msgstr "LPD"
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "64 MB or more"
-msgstr "64 MB 讗讜 讬讜转专"
+msgid "Graphics card: %s\n"
+msgstr "讻专讟讬住 诪住讱: %s\n"
-#: ../../Xconfig/card.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Please check if you are using a DVDRAM device"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Splash selection"
+msgstr "讘讞讬专转 住驻诇讗砖"
-#: ../../Xconfig/card.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "Extended partition not supported on this platform"
+msgstr "讛专讞讘转 诪讞讬爪讛 诇讗 谞转诪讻转 讘驻诇讟驻讜专诪讛 讛讝讗转"
-#: ../../Xconfig/card.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "ISDN Configuration"
+msgstr "讛讙讚专转 ISDN"
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "high"
+msgstr "讙讘讜讛讛"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Internet Connection Sharing"
+msgstr "砖讬转讜祝 讗讬谞讟专谞讟"
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Choose file"
+msgstr "讬砖 诇讘讞讜专 拽讜讘抓"
-#: ../../Xconfig/main.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-"诇砖诪讜专 讗转 讛砖讬谞讜讬讬诐?\n"
-"讛讛讙讚专讜转 讛谞讜讻讞讬讜转 讛谉:\n"
-"\n"
-"%s"
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "讗驻砖专讬讜转"
-
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Test"
-msgstr "讘讚讬拽讛"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "讻谞讬住讛 诇讛讚驻住讛/讻专讟讬住-转诪讜谞讛 讘\"%s\""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Resolution"
-msgstr "专讝讜诇讜爪讬讛"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讗驻砖专 讛讚驻住讛 讘诪讚驻住讜转 讛专砖转 讛驻谞讬诪讬转 讗讜 讘诪讚驻住讜转 讛诪讜讝讻专讜转 讻讗谉?\n"
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Monitor"
-msgstr "诪住讱"
+msgid "Printer default settings"
+msgstr "讛讙讚专讜转 讘专讬专转 诪讞讚诇 注讘讜专 讛诪讚驻住转"
-#: ../../Xconfig/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Graphic Card"
-msgstr "讻专讟讬住 诪住讱"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "讻诇诇讬 - 注讻讘专 PS2 注诐 讙诇讙诇转"
-#: ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Vertical refresh rate"
-msgstr "拽爪讘 专注谞讜谉 讗谞讻讬"
+msgid "Removing old printer \"%s\"..."
+msgstr "诪住讬专 诪讚驻住转 讬砖谞讛 - \"%s\"..."
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "拽爪讘 专注谞讜谉 讗讜驻拽讬"
+msgid "Select a device !"
+msgstr "讘讞专 讛转拽谉!"
-#: ../../Xconfig/monitor.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
+msgid "Remove selected server"
+msgstr "讛住专转 讛砖专转 讛谞讘讞专"
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "French Southern Territories"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "讬爪专谉"
-
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Plug'n Play"
-msgstr "讛讻谞住-讛驻注诇"
+msgid "the vendor name of the processor"
+msgstr "砖诐 讛讬爪专谉 砖诇 讛诪注讘讚"
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a monitor"
-msgstr "讘讞专 诪住讱"
+msgid "All data on this partition should be backed-up"
+msgstr "讻诇 讛诪讬讚注 注诇 诪讞讬爪讛 讝讜 爪专讬讱 诇讛讬讜转 诪讙讜讘讛"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Graphics card: %s"
-msgstr "讻专讟讬住 诪住讱: %s"
+msgid "Installing package %s"
+msgstr "%s - 诪转拽讬谉 讞讘讬诇讛 "
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "谞讗 诇讘讞讜专 专讝讜诇讜爪讬讛 讜专诪转 爪讘注"
+msgid "Checking device and configuring HPOJ..."
+msgstr "讘讜讚拽 讛转拽谉 讜诪讙讚讬专 HPOJ..."
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Resolutions"
-msgstr "专讝讜诇讜爪讬讛"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "讻讚讬 诇讗驻砖专 讬爪讬专转 诪讞讬爪讜转 讞讚砖讜转, 谞讗 诇诪讞讜拽 讗讞转 讻讚讬 诇讗驻砖专 讬爪讬专转 诪讞讬爪讛 谞讜住驻转"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 诪诇讬讗专讚 爪讘注讬诐 (32 讘讬讟)"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 诪诇讬讜谉 爪讘注讬诐 (24 讘讬讟)"
+msgid "Choose packages to install"
+msgstr "谞讗 诇讘讞讜专 讞讘讬诇讜转 诇讛转拽谞讛"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 讗诇祝 爪讘注讬诐 (16 讘讬讟)"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 讗诇祝 爪讘注讬诐 (15 讘讬讟)"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "讻诇 讛诪讞讬爪讜转 讛拽讬讬诪讜转 讜讛诪讬讚注 讘讛谉 讬讗讘讚讜 讘讚讬住拽 %s"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 爪讘注讬诐 (8 讘讬讟)"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr "诇诪注专讻转 砖诇讱 讗讬谉 诪住驻讬拽 砖讟讞 驻谞讜讬 诇讛转拽谞讛 讗讜 砖讚专讜讙 (%d > %d)"
-#: ../../Xconfig/test.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is this the correct setting?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "注讜讝讘 转讜讱 %d 讚拽讜转"
-
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-"砖讙讬讗讛 讛转专讞砖讛:\n"
-"%s\n"
-"讬砖 诇谞住讜转 诇砖谞讜转 诪住驻专 驻专诪讟专讬诐"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "讗讝讛专讛: 讘讚讬拽转 讻专讟讬住 讛诪住讱 讛讝讛 注诇讜诇讛 诇转拽讜注 诇讱 讗转 讛诪讞砖讘"
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讘讚讜拽 讗转 讛讛讙讚专讜转?"
-
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Test of the configuration"
-msgstr "讘讚讬拽转 讛讛讙讚专讜转"
+msgid "Bhutan"
+msgstr "讘讛讜讟谉"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "What norm is your TV using?"
+msgid "Network interface"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
+msgid "Reading printer data..."
+msgstr "拽讜专讗 讗转 诪讬讚注 讛诪讚驻住转..."
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "Korean keyboard"
msgstr ""
-"讘讗驻砖专讜转讬 诇讛讙讚讬专 讗转 诪讞砖讘讱 讻讱 砖讬注诇讛 讗讜讟讜诪讟讬转 讗转 讛诪诪砖拽 讛讙专驻讬(Xfree)讘注转 讛讗转讞讜诇.\n"
-"讛讗诐 讘专爪讜谞讱 砖Xfree 讬注诇讛 讘讝诪谉 讗转讞讜诇?"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Graphical interface at startup"
-msgstr "诪诪砖拽 讙专驻讬 讘讛转讞诇转 讛诪讞砖讘"
+msgid "Not connected"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "诪谞讛诇 讛转拽谉 Xfree86: %s\n"
+msgid "Greek"
+msgstr "讬讜谞讬转"
-#: ../../Xconfig/various.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "砖专转 Xfree86: %s\n"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Resolution: %s\n"
-msgstr "专讝讜诇讜爪讬讛: %s\n"
+msgid "Saint Kitts and Nevis"
+msgstr "住谞讟 拽讬讟住 谞讜讜讬诐"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Color depth: %s\n"
-msgstr "专诪转 爪讘注: %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "讝讬讻专讜谉 讻. 诪住讱: %s kB\n"
+msgid "Enable OF Boot?"
+msgstr "诇讗驻砖专 讗转讞讜诇?"
-#: ../../Xconfig/various.pm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "讻专讟讬住 诪住讱: %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "讗讬谞讱 讬讻讜诇 诇讛砖转诪砖 讘JFS 讘砖讘讬诇 诪讞讬爪讛 拽讟谞讛 诪16 诪讙讛"
#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "专注谞讜谉 讗谞讻讬 砖诇 讛诪住讱: %s\n"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "专注谞讜谉 讗讜驻拽讬 砖诇 讛诪住讱: %s\n"
+msgid "path"
+msgstr "诪讬拽讜诐 转讬拽讬讬讛"
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Monitor: %s\n"
-msgstr "诪住讱: %s\n"
+msgid "Mount point"
+msgstr "谞拽讜讚转 讞讬讘讜专"
-#: ../../Xconfig/various.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "讛转拽谉 注讻讘专: %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"砖讙讬讗讛 讛转专讞砖讛:\n"
+"%s\n"
+"讬砖 诇谞住讜转 诇砖谞讜转 诪住驻专 驻专诪讟专讬诐"
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "住讜讙 注讻讘专: %s\n"
+msgid "Restore system"
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "驻诇讟 诪拽诇讚转: %s\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "讗诇讛 讛诪讞砖讘讬诐 砖讘讛诐 讛住讜专拽讬诐 砖诪讞讜讘讬诐 诪拽讜诪讬转 讗诪讜专讬诐 诇讛讬讜转 讝诪讬谞讬诐:"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Options: %s"
-msgstr "讗驻砖专讜讬讜转: %s"
+msgid "The DHCP end ip"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mount point: "
-msgstr "谞拽讜讚转 讞讬讘讜专:"
+msgid "Another one"
+msgstr "讗讞讚 讗讞专"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Server: "
-msgstr "砖专转:"
+msgid "Drakbackup"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "砖诐 讛讗转专 讞讬讬讘 诇讛转讞讬诇 讘http:// 讗讜 讘https://"
+msgid "Colombia"
+msgstr "拽讜诇讜诪讘讬讛"
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Please enter the WebDAV server URL"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
+"讛讛讙讚专讜转 讛谞讜讻讞讬讜转 砖诇 `%s':\n"
+"\n"
+"专砖转: %s\n"
+"讻转讜讘转 IP: %s\n"
+"砖讬讜讱 IP: %s\n"
+"讛转拽谉: %s"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Mount point"
-msgstr "谞拽讜讚转 讞讬讘讜专"
+msgid "Plug'n Play"
+msgstr "讛讻谞住-讛驻注诇"
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Server"
-msgstr "砖专转"
+msgid "Reunion"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Mount"
-msgstr "讞讬讘讜专"
+msgid "Details"
+msgstr "驻专讟讬诐"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Unmount"
-msgstr "谞讬转讜拽"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "New"
-msgstr "讞讚砖"
+msgid "Synchronization tool"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+msgid "Checking your system..."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "诪砖转诪砖 讘''%s''讘诪拽讜诐"
+msgid "Print"
+msgstr "讛讚驻住讛"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Type"
-msgstr "住讜讙"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "讛砖转诪砖/讬 讘''谞讬转讜拽'' 拽讜讚诐"
+msgid "Mongolia"
+msgstr "诪讜谞讙讜诇讬讛"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete"
-msgstr "诪讞讬拽讛"
+msgid "Mounted\n"
+msgstr "诪讞讜讘专\n"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Create"
-msgstr "讬爪讬专讛"
+msgid "Graphical Interface"
+msgstr "诪诪砖拽 讙专驻讬"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Filesystem types:"
-msgstr "住讜讙讬 诪注专讻讜转 拽讘爪讬诐:"
+msgid "Restore Users"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Empty"
-msgstr "专讬拽"
+msgid "Encryption key for %s"
+msgstr "诪驻转讞 讛爪驻谞讛 注讘讜专 %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Windows"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Detected hardware"
+msgstr "讞讜诪专讛 砖讝讜讛转讛"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Swap"
-msgstr "讝讬讻专讜谉 讜讬专讟讜讗诇讬"
+msgid "Mauritius"
+msgstr "诪讗讜专讬爪讬讜住"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid "Myanmar (Burmese)"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Enabling swap partition %s"
+msgstr "诪讗驻砖专 诪讞讬爪转 讝讬讻专讜谉 讜讬专讟讜讗诇讬 %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "No hard drives found"
-msgstr "诇讗 谞诪爪讗讜 讻讜谞谞讬诐 拽砖讬讞讬诐"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "讗讬谉 诪讞讬爪转 FAT 诇砖讬谞讜讬 讙讜讚诇 讗讜 诇砖讬诪讜砖 讻loopback - 诇讗 诪住驻讬拽 诪拽讜诐 谞讜转专"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please click on a partition"
-msgstr "谞讗 诇诇讞讜抓 注诇 诪讞讬爪讛"
+msgid "Armenian (old)"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
+"诪讚驻住转 讘砖诐 \"%s\" 讻讘专 拽讬讬诪转 转讞转 %s.\n"
+"讬砖 诇诇讞讜抓 \"讛注讘专讛\" 讻讚讬 诇讚专讜住 讗讜转讛.\n"
+"讘讗驻砖专讜转讱 讙诐 诇专砖讜诐 砖诐 讞讚砖 讗讜 诇讚诇讙 注诇 诪讚驻住转 讝讜."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "Choose action"
-msgstr "讬砖 诇讘讞讜专 驻注讜诇讛"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
+"诪爪讬讗转 驻转专讜谉 诇讘注讬讜转讱 谞注砖讬转 驻砖讜讟讛 讚专讱 驻诇讟驻讜专诪转 讛转诪讬讻讛 讛诪拽讜讜谞转 砖诇 "
+"MandrakeSoft's."
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Wizard"
-msgstr "讗砖祝"
+msgid ", host \"%s\", port %s"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘aboot, 讬砖 诇讛讬讝讛专 诇讛砖讗讬专 诪拽讜诐 驻谞讜讬 (2048 住拽讟讜专讬诐 讝讛 "
-"诪住驻讬拽) \n"
-"讘转讞讬诇转 讛讚讬住拽"
+msgid "Monaco"
+msgstr "诪讜谞拽讜"
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "谞讗 诇讙讘讜转 讗转 讛诪讬讚注 砖诇讱 拽讜讚诐 诇讻谉"
+msgid "%s formatting of %s failed"
+msgstr "驻讬专诪讜讟 %s 砖诇 %s 谞讻砖诇"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Read carefully!"
-msgstr "讬砖 诇拽专讜讗 讘讛拽驻讚讛!"
+msgid "Partitioning failed: %s"
+msgstr "诪讬讞讜抓 谞讻砖诇: %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Encryption key (again)"
-msgstr "诪驻转讞 讛爪驻谞讛 (讘砖谞讬转)"
+msgid "Canada (cable)"
+msgstr "拽谞讚讛 (讻讘诇讬诐)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Encryption key"
-msgstr "诪驻转讞 讛爪驻谞讛"
+msgid "Upgrade"
+msgstr "注讚讻讜谉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "The encryption keys do not match"
-msgstr "诪驻转讞讜转 讛讛爪驻谞讛 诇讗 转讜讗诪讬诐"
+msgid "Workstation"
+msgstr "转讞谞转 注讘讜讚讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "诪驻转讞 讛讛爪驻谞讛 驻砖讜讟 诪讬讚讬讬 讜讞讬讬讘 诇讛讬讜转 讘讗讜专讱 砖诇 诇驻讞讜转 %d 转讜讜讬诐"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"诪转拽讬谉 讞讘讬诇讛 %s\n"
+"%d%%"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "讬砖 诇讘讞讜专 讗转 诪驻转讞 讛讛爪驻谞讛 砖诇 讛诪注专讻转 砖诇讱"
+msgid "Kyrgyzstan"
+msgstr "拽讬专讙讬住讟谉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Filesystem encryption key"
-msgstr "诪驻转讞 讛讛爪驻谞讛 砖诇 讛诪注专讻转"
+msgid "With basic documentation"
+msgstr "注诐 诪住诪讻讬诐 讘住讬住讬讬诐 (诪讜诪诇抓!)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Type: "
-msgstr "住讜讙:"
+msgid "Anacron is a periodic command scheduler."
+msgstr "转讜讻谞转 Anacron 讛讬讗 转讜讻谞转 诇讜讞 讝诪谞讬诐 诪讞讝讜专讬 驻拽讜讚转讬."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "on channel %d id %d\n"
-msgstr "讘注专讜抓 %d 讝讬讛讜讬 %d\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"讞讜讘讛 注诇讬讱 转讬拽讬讬讛 专讗砖讬转.\n"
+"讘砖讘讬诇 讻讱 讬砖 诇讬爪讜专 诪讞讬爪讛 讗讜 诇诇讞讜抓 注诇 诪讞讬爪讛 拽讬讬诪转.\n"
+"讗讝 讬砖 诇讛驻注讬诇 ''谞拽讜讚转 讞讬讘讜专'' 讜诇讛讙讚讬专 讝讗转 诇/"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "住讜讙 砖讜诇讞谉 讛诪讞讬爪讜转: %s\n"
+msgid "Proxy should be http://..."
+msgstr "驻专讜拽住讬 爪专讬讱 诇讛讬讜转 http://..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disks %s\n"
+msgid "South Africa"
+msgstr "讚专讜诐 讗驻专讬拽讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Info: "
-msgstr "诪讬讚注:"
+msgid "Western Sahara"
+msgstr "住讛专讛 讛诪注专讘讬转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "转讻讜谞讜转: %s 爪讬诇讬谞讚专讬诐, %s 专讗砖讬诐, %s 住拽讟讜专讬诐\n"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Size: %s\n"
-msgstr "讙讜讚诇: %s\n"
+msgid "Modify printer configuration"
+msgstr "砖讬谞讜讬 讛讙讚专讜转 诪讚驻住转"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Read-only"
-msgstr "拽专讬讗讛-讘诇讘讚"
+msgid "Choose a partition"
+msgstr "讬砖 诇讘讞讜专 诪讞讬爪讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Device: "
-msgstr "讛转拽谉:"
+msgid "Edit current rule"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "%s"
msgstr ""
-"\n"
-"诪讞讬爪转 专爪讜注转 讛讗转讞讜诇 \n"
-"讛诪讬讜讞讚转 讛讝讗转 讛讬讗 讘砖讘讬诇\n"
-"讗转讞讜诇 讻驻讜诇 砖诇 讛诪注专讻转 砖诇讱.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Enable/Disable the logging of IPv4 strange packets."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
+msgid "Please test the mouse"
+msgstr "谞讗 诇讘讚讜拽 讗转 讛注讻讘专"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "RAID-disks %s\n"
+msgid "Other Media"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Chunk size %s\n"
+msgid "Backup system files"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Level %s\n"
-msgstr "砖诇讘 %s\n"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"诪讞讬爪讛 诪讗转讞诇转 讻讘专讬专转 诪讞讚诇\n"
-" (诇讗转讞讜诇 诪讚讜住, 诇讗 诪Lilo)\n"
+msgid "Sector"
+msgstr "住拽讟讜专"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
+msgid "Qatar"
+msgstr "拽讟讗专"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "RAID md%s\n"
+msgid "LDAP Base dn"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Mounted\n"
-msgstr "诪讞讜讘专\n"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "讗讬 讗驻砖专 诇讘讞讜专 讘讞讘讬诇讛 讝讜 诪讻讬讜讜谉 砖诇讗 谞讜转专 诪住驻讬拽 诪拽讜诐 驻谞讜讬 诇讛转拽讬谞讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Not formatted\n"
-msgstr "诇讗 诪驻讜专诪讟\n"
+msgid "generate auto-install floppy"
+msgstr "讘谞讛 讚讬住拽讟 讛转拽谞讛 讗讜讟讜诪讟讬转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Formatted\n"
-msgstr "诪驻讜专诪讟\n"
+msgid "Dialing mode"
+msgstr "诪爪讘 讛转拽砖专讜转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "爪讬诇讬谞讚专 %d 诇%d\n"
+msgid "File sharing"
+msgstr "砖讬转讜祝 拽讘爪讬诐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", %s sectors"
-msgstr ", %s 住拽讟讜专讬诐"
+msgid "Clean /tmp at each boot"
+msgstr "谞拽讛 /tmp 讘讻诇 讗转讞讜诇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Size: %s"
-msgstr "讙讜讚诇: %s"
+msgid "Malawi"
+msgstr "诪诇讗讜讜讬"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start: sector %s\n"
-msgstr "讛转讞诇讛: 住拽讟讜专 %s\n"
+msgid "Please choose your type of mouse."
+msgstr "谞讗 诇讘讞讜专 讗转 住讜讙 讛注讻讘专 砖诇讱."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Name: "
-msgstr "砖诐:"
+msgid "class of hardware device"
+msgstr "住讜讙 讛转拽谉 讛讞讜诪专讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "讗讜转 讻讜谞谉 讚讜住: %s (诇驻讬 谞讬讞讜砖)\n"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "partition %s is now known as %s"
-msgstr "诪讞讬爪讛 %s 讬讚讜注讛 注讻砖讬讜 讻%s"
+msgid "United Kingdom"
+msgstr "讘专讬讟谞讬讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Removing %s"
-msgstr "诪住讬专 讗转 %s"
+msgid "running"
+msgstr "专抓"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Copying %s"
-msgstr "诪注转讬拽 %s"
+msgid "default"
+msgstr "讘专讬专转 诪讞讚诇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Moving files to the new partition"
-msgstr "诪注讘讬专 拽讘爪讬诐 诇诪讞讬爪讛 讛讞讚砖讛"
+msgid "Indonesia"
+msgstr "讗讬谞讚讜谞讝讬讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "France [SECAM]"
msgstr ""
-"转讬拽讬讬讛 %s 讻讘专 讻讜诇诇转 诪讬讚注\n"
-"(%s("
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Hide files"
-msgstr "讛住转专 拽讘爪讬诐"
+msgid "restrict"
+msgstr "讛讙讘诇讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Move files to the new partition"
-msgstr "讛注讘专 拽讘爪讬诐 诇诪讞讬爪讛 讛讞讚砖讛"
+msgid "must have"
+msgstr "讞讬讬讘 诇讛讬讜转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "讗讞专讬 驻专诪讜讟 诪讞讬爪转 %s, 讻诇 讛诪讬讚注 讘诪讞讬爪讛 讝讜 讬讗讘讚"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "转爪转专讻/讬 诇讛驻注讬诇 诪讞讚砖 讻讚讬 砖讛砖讬谞讜讬讬诐 讬讻谞住讜 诇转讜拽祝"
+msgid "Senegal"
+msgstr "住谞讙诇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "砖讜诇讞谉 诪讞讬爪讜转 砖诇 讻讜谞谉 %s 注讜诪讚 诇讛讻转讘 诇讚讬住拽!"
+msgid "Command line"
+msgstr "砖讜专转 驻拽讜讚讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "讛讞讘讬诇讛 %s 讚专讜砖讛. 讛讗诐 诇讛转拽讬谞讛?"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"讟讜讜讞 讛驻转专讜谞讜转 讛专讞讘 砖诇谞讜 诇诇讬谞讜拽住, 讻诪讜 讻谉 讛爪注讜转 诪讬讜讞讚讜转 注诇 诪讜爪专讬诐 讜讚讘专讬诐 讟讜讘讬诐 "
+"讗讞专讬诐, 讝诪讬谞讬诐 讘讞谞讜转 讛诪拽讜讜谞转 砖诇谞讜:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "What type of partitioning?"
-msgstr "讗讬讝讛 住讜讙 诪讬讞讜抓?"
+msgid "access to administrative files"
+msgstr "讻谞讬住讛 诇拽讘爪讬 谞讬讛讜诇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "讛砖诪专/讬: 驻注讜诇讛 讝讜 诪住讜讻谞转."
+msgid ""
+"Error during sendmail.\n"
+" Your report mail was not sent.\n"
+" Please configure sendmail"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "chunk size"
+msgid ", multi-function device on parallel port \\#%s"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "level"
-msgstr "专诪讛"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
#, c-format
-msgid "device"
-msgstr "讛转拽谉"
+msgid "Montserrat"
+msgstr "诪讜谞住专讗讟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Various"
-msgstr "诪转拽讚诐"
+msgid "Automatic dependencies"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Mount options"
-msgstr "讗驻砖专讜讬讜转 讞讬讘讜专"
+msgid "Swap"
+msgstr "讝讬讻专讜谉 讜讬专讟讜讗诇讬"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "File already exists. Use it?"
-msgstr "拽讜讘抓 讝讛 拽讬讬诐 讻讘专. 诇讛砖转诪砖 讘讜?"
+msgid "Connecting to the Internet "
+msgstr "诪转讞讘专 诇讗讬谞讟专谞讟"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "File is already used by another loopback, choose another one"
+msgid "Restore Other"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Give a file name"
-msgstr "讛讻谞住/讬 砖诐 拽讜讘抓"
+msgid "TV card"
+msgstr "讻专讟讬住 TV"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Filesystem type: "
-msgstr "住讜讙 诪注专讻转 拽讘爪讬诐:"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Size in MB: "
-msgstr "讙讜讚诇 讘MB:"
+msgid ", "
+msgstr ", "
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Loopback file name: "
+msgid ""
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Loopback"
+msgid "Remove selected host/network"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "This partition can't be used for loopback"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM name?"
-msgstr "砖诐 LVM?"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "new"
-msgstr "讞讚砖"
+msgid "Disconnection from the Internet failed."
+msgstr "讛讛转谞转拽讜转 诪讛讗讬谞讟专谞讟 谞讻砖诇讛."
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Choose an existing LVM to add to"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
+"讻讗谉 讬砖 讗驻砖专讜转 诇讘讞讜专 讗转 砖讬诇讜讘 讛诪拽砖讬诐 砖讬专砖讛 诇讱 诇讛讞诇讬祝 讘讬谉\n"
+"驻诇讟讬诐 砖讜谞讬诐 砖诇 讛诪拽诇讚转 (砖驻讜转)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr ""
+msgid "Network Hotplugging"
+msgstr "讞讬讘讜专讬 专砖转 讞诪讬诐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Moving partition..."
-msgstr "诪注讘讬专 诪讞讬爪讛..."
+msgid "if set to yes, reports check result to tty."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Moving"
-msgstr "诪注讘讬专"
+msgid "Restore From CD"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "诇讗讬讝讛 住拽讟讜专 讘专爪讜谞讱 诇讛注讘讬专 讗转 讝讛?"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
#, c-format
-msgid "Sector"
-msgstr "住拽讟讜专"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "诇讗讬讝讛 讚讬住拽 讘专爪讜谞讱 诇讛注讘讬专 讗转 讝讛?"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Move"
-msgstr "讛注讘专"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "New size in MB: "
-msgstr "讙讜讚诇 讞讚砖 讘MB:"
+msgid "Internet Connection Sharing is now disabled."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the new size"
-msgstr "讬砖 诇讘讞讜专 讗转 讛讙讜讚诇 讛讞讚砖"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Resize"
-msgstr "砖谞讛 讙讜讚诇"
+msgid "Latin American"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "讗讞专讬 砖讬谞讜讬 讙讜讚诇 砖诇 诪讞讬爪讛 %s, 讻诇 讛诪讬讚注 注诇 诪讞讬爪讛 讝讜 讬讗讘讚"
+msgid "Japanese text printing mode"
+msgstr "诪爪讘 讛讚驻住转 讟拽住讟 讬驻谞讬"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "讻诇 讛诪讬讚注 注诇 诪讞讬爪讛 讝讜 爪专讬讱 诇讛讬讜转 诪讙讜讘讛"
+msgid "Old device file"
+msgstr "拽讜讘抓 讛转拽谉 讬砖谉"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "This partition is not resizeable"
-msgstr "诇讗 谞讬转谉 诇砖谞讜转 讗转 讙讜讚诇讛讛 砖诇 诪讞讬爪讛 讝讜"
+msgid "Info: "
+msgstr "诪讬讚注:"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr ""
+msgid "Button `%s': %s"
+msgstr "讻驻转讜专 `%s': %s"
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "诇讗谉 讘专爪讜谞讱 诇讞讘专 讗转 %s?"
+msgid "Please wait"
+msgstr "谞讗 诇讛诪转讬谉"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "诇讗谉 讘专爪讜谞讱 诇讞讘专 讗转 讛讛转拽谉 %s?"
+msgid "None"
+msgstr "讻诇讜诐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "讗讬驻讛 讘专爪讜谞讱 诇讞讘专 讗转 拽讜讘抓 讛loopback 讘砖诐 %s?"
+msgid "The entered IP is not correct.\n"
+msgstr "讻转讜讘转 讛IP 讗讬谞讛 转拽讬谞讛.\n"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "诪讞诇讬祝 诪ext2 诇ext3"
+msgid "Ethernet Card"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "讗讬讝讜 诪注专讻转 拽讘爪讬诐 讗转/讛 专讜爪讛?"
+msgid "Info"
+msgstr "诪讬讚注"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Change partition type"
-msgstr "砖谞讛 住讜讙 诪讞讬爪讛"
+msgid "Install"
+msgstr "讛转拽谞讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "讗讞专讬 砖讬谞讜讬 住讜讙 砖诇 诪讞讬爪讛 %s, 讻诇 讛诪讬讚注 砖注诇讬讛 讬讗讘讚"
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"诇讞爪/讬 讗讬砖讜专 讗诐 讘专爪讜谞讱 诇讗讘讚 讗转 讻诇 讛诪讞讬爪讜转 讜讛诪讬讚注 注诇 讻讜谞谉 拽砖讬讞 讝讛.\n"
+"讝讛讬专讜转: 讗讞专讬 诇讞讬爪讛 注诇 \"%s\" 讗讬谉 讚专讱 诇砖讞讝专 讗转 讛诪讞讬爪讜转 讜讛诪讬讚注\n"
+"讛诪讜驻讬注讬诐 讘讻讜谞谉 拽砖讬讞 讝讛, 讻讜诇诇 讻诇 诪讬讚注 \"%s\".\n"
+"\n"
+"谞讗 诇诇讞讜抓 注诇 \"%s\" 诇注爪讬专转 转讛诇讬讱 讝讛 诇诇讗 讛驻住讚转 讻诇 诪讬讚注 讜诪讞讬爪讜转 拽讬讬诪讬诐."
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Remove the loopback file?"
-msgstr ""
+msgid "Exit install"
+msgstr "讬爪讬讗讛 诪讛讛转拽谞讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Preference: "
-msgstr "讛注讚驻讜转:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Start sector: "
-msgstr "住拽讟讜专 讛转讞诇讛:"
+msgid "Remote CUPS server"
+msgstr "砖专转 CUPS 专讞讜拽"
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Create a new partition"
-msgstr "爪讜专 诪讞讬爪讛 讞讚砖讛"
+msgid "Sun - Mouse"
+msgstr "注讻讘专 - Sun"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Use for loopback"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Modify RAID"
-msgstr ""
+msgid "Minimal install"
+msgstr "讛转拽谞讛 诪讬谞讬诪诇讬转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove from LVM"
-msgstr ""
+msgid "Ethiopia"
+msgstr "讗转讬讜驻讬讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remove from RAID"
+msgid "Devanagari"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Add to LVM"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
+"- 讛转拽谞讬 pci: 讝讛 谞讜转谉 讗转 讞专讬抓 讛PCI, 讛转拽谉 讜驻讜谞拽爪讬讜转 砖诇 讛讻专讟讬住\n"
+"- 讛转拽谞讬 eide: 讛讛转拽谉 讛讜讗 讗讜 讛讗讚讜谉 (master) 讗讜 注讘讚(slave)\n"
+"- 讛转拽谞讬 scsi: 讛bus 砖诇 讛scsi 讜讛讝讬讛讜讬 讛转拽谉 砖诇 讛scsi"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add to RAID"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "讙讜讚诇 讻诇诇讬: %d / %d MB"
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Format"
-msgstr "驻专诪讟"
+msgid "disabled"
+msgstr "讘讬讟讜诇"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Detailed information"
-msgstr "诪讬讚注 诪驻讜专讟"
+msgid "Search for new scanners"
+msgstr "讞讬驻讜砖 住讜专拽讬诐 讞讚砖讬诐"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "诪谞住讛 诇讛爪讬诇 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
+msgid "Disabling servers..."
+msgstr "诪讘讟诇 砖专转讬诐..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Please choose the time \n"
+"interval between each backup"
msgstr ""
-"讛讻谞住/讬 讚讬住拽讟 诇讻讜谞谉\n"
-"讻诇 讛诪讬讚注 注诇 讚讬住拽讟 讝讛 讬讗讘讚"
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Warning"
-msgstr "讗讝讛专讛"
+msgid "Installation of %s failed. The following error occured:"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Select file"
-msgstr "讬砖 诇讘讞讜专 拽讜讘抓"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "诇讗 讬讻讜诇 诇讛驻注讬诇 mkinitrd -f /boot/initrd-%s.img %s."
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-"砖讜诇讞谉 讛诪讞讬爪讜转 讗讬谞讜 转讜讗诐 讘讙讜讚诇讜\n"
-"讛讗诐 诇讛诪砖讬讱 讘讻诇 诪拽专讛?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "讞讬讘讜专 讗讜讟讜诪讟讬 砖诇 诪讚讬讛 谞砖诇驻转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Reload partition table"
-msgstr "讟注谉 诪讞讚砖 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
+msgid "Network printer (TCP/Socket)"
+msgstr "诪讚驻住转 专砖转 (TCP/Socket)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Rescue partition table"
-msgstr "讛爪诇 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
+msgid "Backup User files..."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Restore partition table"
-msgstr "砖讞讝专 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
+msgid "Install system"
+msgstr "讛转拽谞转 讛诪注专讻转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Save partition table"
-msgstr "砖诪讜专 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
+msgid "First DNS Server (optional)"
+msgstr "砖专转 DNS 专讗砖讜谉 (讗讜驻爪讬讛)"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "讻讚讬 诇讗驻砖专 讬爪讬专转 诪讞讬爪讜转 讞讚砖讜转, 谞讗 诇诪讞讜拽 讗讞转 讻讚讬 诇讗驻砖专 讬爪讬专转 诪讞讬爪讛 谞讜住驻转"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "讗讬谉 讘讗驻砖专讜转讬 诇讛讜住讬祝 诪讞讬爪讛 谞讜住驻转"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All primary partitions are used"
-msgstr "讻诇 讛诪讞讬爪讜转 讛专讗砖讬讜转 诪砖讜诪砖讜转"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "诪讬讚注 注诇 讛讻讜谞谉 讛拽砖讬讞"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Auto allocate"
-msgstr "讛拽爪讘讛 讗讜讟讜诪讟讬转"
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Clear all"
-msgstr "谞拽讛 讛讻诇"
+msgid "dhcpd Config..."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "讛讗诐 讘专爪讜谞讱 诇砖诪讜专 讗转 砖讬谞讜讬讬 /etc/fstab?"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "诇爪讗转 讘诇讬 诇专砖讜诐 诇砖讜诇讞谉 讛诪讞讬爪讜转?"
+msgid "LILO/grub Installation"
+msgstr "讛转拽谞转 LILO/grub"
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Quit without saving"
-msgstr "讬爪讬讗讛 诇诇讗 砖诪讬专讛"
+msgid "Israeli"
+msgstr "注讘专讬转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Continue anyway?"
-msgstr "诇讛诪砖讬讱 讘讻诇 讝讗转?"
+msgid "load setting"
+msgstr "讟讜注谉 讛讙讚专讛"
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Toggle to expert mode"
-msgstr "注讘讜专 诇诪爪讘 诪讜诪讞讛"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "诪讚驻住转 \"%s\" 注诇 砖专转 \"%s\""
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Toggle to normal mode"
-msgstr "注讘讜专 诇诪爪讘 专讙讬诇"
+msgid "Floppy can be removed now"
+msgstr "讗驻砖专 诇讛住讬专 讗转 讛讚讬住拽讟 注讻砖讬讜"
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Undo"
-msgstr "讘讟诇"
+msgid "Truly minimal install"
+msgstr "讛转拽谞讛 诪讬谞讬诪诇讬转"
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Exit"
-msgstr "讬爪讬讗讛"
+msgid "Denmark"
+msgstr "讚谞诪专拽"
#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Choose a partition"
-msgstr "讬砖 诇讘讞讜专 诪讞讬爪讛"
+msgid "Moving partition..."
+msgstr "诪注讘讬专 诪讞讬爪讛..."
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Choose another partition"
-msgstr "讬砖 诇讘讞讜专 诪讞讬爪讛 讗讞专转"
+msgid "(This) DHCP Server IP"
+msgstr ""
-#: ../../diskdrake/removable.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "Change type"
-msgstr "砖讬谞讜讬 住讜讙"
+msgid "Test of the configuration"
+msgstr "讘讚讬拽转 讛讛讙讚专讜转"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search servers"
-msgstr "讞驻砖 砖专转讬诐"
+msgid "Installing %s ..."
+msgstr "诪转拽讬谉 讗转 %s ..."
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Domain"
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Username"
-msgstr "砖诐 诪砖转诪砖"
+msgid "Choose your filesystem encryption key"
+msgstr "讬砖 诇讘讞讜专 讗转 诪驻转讞 讛讛爪驻谞讛 砖诇 讛诪注专讻转 砖诇讱"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Please enter your username, password and domain name to access this host."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Authentication Required"
-msgstr ""
+msgid "Andorra"
+msgstr "讗谞讚讜专讛"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Another one"
-msgstr "讗讞讚 讗讞专"
+msgid "Sierra Leone"
+msgstr "住讬讬专讛 诇讬讗讜谞讛"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Which username"
-msgstr "讗讬讝讛 砖诐 诪砖转诪砖"
+msgid "Botswana"
+msgstr "讘讜讟住讜讗谞讛"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "讗讬谉 讗驻砖专讜转 讻谞讬住讛 讘砖讬诪讜砖 砖诐 诪砖转诪砖 %s (住讬住诪讛 砖讙讜讬讛?)"
+msgid "(default value: %s)"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "cpu # "
-msgstr "诪注讘讚 # "
+msgid "Alternative test page (Letter)"
+msgstr "讚祝 谞住讬讜谉 讗诇讟专谞讟讬讘讬 (诪讻转讘)"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "SMBus controllers"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "USB controllers"
-msgstr ""
+msgid "Choose an X server"
+msgstr "讘讞专 砖专转 X"
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Swap partition size in MB: "
+msgstr "讙讜讚诇 诪讞讬爪转 讝讻专讜谉 讜讬专讟讜讗诇讬 讘MB:"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Firewire controllers"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "No changes to backup!"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Formatted\n"
+msgstr "诪驻讜专诪讟\n"
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Scanner"
-msgstr "住讜专拽"
+msgid "Type of install"
+msgstr "住讜讙 诇讛转拽谞讛"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Unknown/Others"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Bridges and system controllers"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Modem"
-msgstr "诪讜讚诐"
+msgid "%d comma separated numbers"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Ethernetcard"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Processors"
+msgid "Automatic Steps Configuration"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Webcam"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
msgstr ""
+"专讜爪讛 诇讚注转 注讜讚 注诇 讛爪讟专驻讜转 诇拽讛讬诇转 讛拽讜讚 讛驻转讜讞? 讛讬讜 诪注讜专讘讬诐 讘注讜诇诐 讛转讜讻谞讛 讛讞讜驻砖讬转!"
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Soundcard"
-msgstr "讻专讟讬住 拽讜诇"
+msgid "Barbados"
+msgstr "讘专讘讚讜住"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Other MultiMedia devices"
+msgid "Please select data to backup..."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Tvcard"
-msgstr "讻专讟讬住 讟诇讜讬讝讬讛"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
+msgstr ""
+"讛转讞讘专讜转 谞讻砖诇讛.\n"
+"谞讗 诇讘讚讜拽 讗转 讛讛讙讚专讜转 讘诪专讻讝 讛讛讙讚专讜转 砖诇 诪谞讚专讬讬拽."
-#: ../../harddrake/data.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Videocard"
-msgstr "讻专讟讬住 诪住讱"
+msgid "received"
+msgstr "讛转拽讘诇"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Tape"
-msgstr ""
+msgid "/File/_New"
+msgstr "/拽讜讘抓/_讞讚砖"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "DVD-ROM"
+msgid "The DNS Server IP"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "CD/DVD burners"
+msgid "IP Range End:"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "CDROM"
+msgid "High"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Disk"
-msgstr ""
+msgid "NoVideo"
+msgstr "讗讬谉 转爪讜讙讛"
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "讛砖讚讛 讛讝讛 诪讻讬诇 转讗讜专 砖诇 讛讛转拽谉 "
+
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Zip"
-msgstr ""
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "诪讜住讬祝 诪讚驻住转 诇Star Office/OpenOffice.org/GIMP."
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Floppy"
-msgstr "讚讬住拽讟"
+msgid "Local Printers"
+msgstr "诪讚驻住讜转 诪拽讜诪讬讜转"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Let me pick any driver"
+msgid "Installation image directory"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Driver:"
-msgstr "诪谞讛诇 讛转拽谉:"
+msgid "NIS Server"
+msgstr "砖专转 NIS"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Port: %s"
+msgstr "Port: %s"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Spain"
+msgstr "住驻专讚"
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "诪砖转诪砖 讝讛 讻讘专 谞讜住祝"
-#: ../../harddrake/sound.pm:1
+#: ../../interactive.pm:1
#, c-format
-msgid "Sound trouble shooting"
-msgstr "驻转讬专转 讘注讬讜转 拽讜诇"
+msgid "Choose a file"
+msgstr "讬砖 诇讘讞讜专 拽讜讘抓"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid "Apply"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Unkown driver"
-msgstr "诪谞讛诇 讛转拽谉 诇讗 讬讚讜注"
+msgid "Auto-detect available ports"
+msgstr "讝讬讛讜讬 讗讜讟讜诪讟讬转 砖诇 ports 讝诪讬谞讬诐"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "讗讬谉 驻讛 诪谞讛诇 讛转拽谉 讬讚讜注 诇讻专讟讬住 讛拽讜诇 砖诇讱 (%s)"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "砖讬转讜祝 讞讬讘讜专 讗讬谞讟专谞讟 讻专讙注 诪讘讜讟诇"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No known driver"
-msgstr "讗讬谉 诪谞讛诇 讛转拽谉 讬讚讜注"
+msgid "San Marino"
+msgstr "住讗谉-诪讗专讬谞讜"
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
+msgid "Belgium"
+msgstr "讘诇讙讬讛"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "No open source driver"
-msgstr ""
+msgid "Kuwait"
+msgstr "讻讜讜讬转"
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "谞讗 诇讛诪转讬谉... 诪拽讘诇 讗转 讛讛讙讚专讜转"
+msgid "Choose the window manager to run:"
+msgstr "讘讞专 讗转 诪谞讛诇 讛讞诇讜谞讜转 砖讬专讜抓:"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+msgid "sub generation of the cpu"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Trouble shooting"
-msgstr "驻转讬专转 讘注讬讜转"
+msgid "First Time Wizard"
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
msgstr ""
+"砖讙讬讗讛 讛转专讞砖讛, 讗讱 讗讬谞讬 讬讜讚注 讗讬讱 诇讛转诪讜讚讚 讗讬转讛 讘注讚讬谞讜转.\n"
+"讛诪砖讱 讛转诪讜讚讚讜转 注诐 住讬讻讜谉 讘讗讞专讬讜转讱"
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"讻专讟讬住 讛拽讜诇 砖诇讱 诪砖转诪砖 讻专讙注 讘诪谞讛诇 讛讛转拽谉 %s\"%s\" (讘专讬专转 诪讞讚诇 诇诪谞讛诇 讛转拽谉 "
-"诇讻专讟讬住讱 \"%s\")"
+msgid "please wait, parsing file: %s"
+msgstr "谞讗 诇讛诪转讬谉, 驻讜专住 拽讜讘抓: %s"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"讻讗谉 讘讗驻砖专讜转讱 诇讘讞讜专 诪谞讛诇 讛转拽谉 讗诇讟专谞讟讬讘讬 (讙诐 OSS 讗讜 ALSA) 诇讻专讟讬住 讛拽讜诇 砖诇讱 (%s)."
+msgid "Taiwan"
+msgstr "转讗讬讜讜谉"
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sound configuration"
-msgstr "讛讙讚专讜转 拽讜诇"
+msgid "Pakistan"
+msgstr "驻拽讬住讟谉"
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr "讗讬谉 讗诇讟专谞讟讬讘讜转 OSS 讗讜 ALSA 诇讻专讟讬住 讛拽讜诇 砖诇讱 (%s) 讗砖专 诪砖转诪砖 讻专讙注 讘\"%s\""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No alternative driver"
-msgstr "讗讬谉 诪谞讛诇 讛转拽谉 讗诇讟专谞讟讬讘讬"
+msgid "Permissions"
+msgstr "讛专砖讗讜转"
-#: ../../harddrake/v4l.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "enable radio support"
-msgstr "讗驻砖专 转诪讬讻转 专讚讬讜"
+msgid "Provider name (ex provider.net)"
+msgstr "砖诐 讛住驻拽 (诇讚讜讙诪讗 provider.net)"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Radio support:"
-msgstr "转诪讬讻转 专讚讬讜:"
+msgid "Version: %s\n"
+msgstr "讙讬专住讛: %s\n"
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "PLL setting:"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
+"讛诪注专讻转 砖诇讱 讘注诇转 诪砖讗讘讬诐 谞诪讜讻讬诐. 讗讜诇讬 讬讛讬讜 诇讱 讻诪讛 讘注讬讜转 诇讛转拽讬谉\n"
+"讗转 诇讬谞讜拽住 诪谞讚专讬讬拽. 讗诐 讝讛 拽讜专讛, 讗转/讛 讬讻讜诇/讛 诇讛转拽讬谉 讚专讱 诪诪砖拽 讟拽住讟 讘诪拽讜诐. 讘砖讘讬诇 "
+"讻讱 讬砖 诇诇讞讜抓 F1 讻讗砖专 诪驻注讬诇讬诐 讻谞讬住讛 诪讚讬住拽 讜诇讛讻谞讬住 'text'."
-#: ../../harddrake/v4l.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "砖讬诪讜砖 讘诪讞讬爪转 讞诇讜谞讜转 诇loopback"
-#: ../../harddrake/v4l.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Number of capture buffers:"
-msgstr "诪住驻专 砖诇 转驻讬住转 讞讜爪爪讬诐:"
+msgid "Armenian (typewriter)"
+msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Tuner type:"
-msgstr "住讜讙 诪讻讜讜谉:"
+msgid "Connection type: "
+msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Card model:"
-msgstr "诪讜讚诇 讻专讟讬住:"
+msgid "Graphical interface"
+msgstr "诪诪砖拽 讙专驻讬"
-#: ../../harddrake/v4l.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s 注诐 讞讜诪专讛 诪讗讬爪转 转诇转 诪讬诪讚 "
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|Generic"
-msgstr "诇讗 讬讚讜注|讻诇诇讬"
+msgid "India"
+msgstr "讛讜讚讜"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "Chad"
+msgstr "爪~讚"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "Slovakia"
+msgstr "住诇讜讘拽讬讛"
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Auto-detect"
-msgstr "讝讬讛讜讬-讗讜讟讜诪讟讬"
+msgid "Singapore"
+msgstr "住讬谞讙驻讜专"
-#: ../../interactive/newt.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do"
-msgstr "注砖讛"
+msgid "Cambodia"
+msgstr "拽诪讘讜讚讬讛"
-#: ../../interactive/stdio.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "讛讘讞讬专讛 砖诇讱? ( 讘专讬专转 诪讞讚诇 %s)"
+msgid "Monitor HorizSync: %s\n"
+msgstr "专注谞讜谉 讗讜驻拽讬 砖诇 讛诪住讱: %s\n"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "讘讞讬专讛 讙专讜注讛, 讬砖 诇谞住讜转 砖讜讘\n"
+msgid "Path"
+msgstr "诪讬拽讜诐 转讬拽讬讬讛"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Re-submit"
-msgstr "讟注谉 诪讞讚砖"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
msgstr ""
-"=> 讬砖 诇砖讬诐 诇讘, 转讜讜讬转 砖讜谞转讛:\n"
-"%s"
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"Printer %s\n"
+"What do you want to modify on this printer?"
msgstr ""
+"诪讚驻住转 %s\n"
+"诪讛 讘专爪讜谞讱 诇讛讙讚讬专 讘诪讚驻住转 讝讜?"
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> 讬砖 讚讘专讬诐 专讘讬诐 诇讘讞讜专 诪转讜讱 (%s).\n"
+msgid "Add host"
+msgstr "讛讜住驻转 诪讗专讞"
-#: ../../interactive/stdio.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "讘讞讬专讛 砖诇讱? (讘专讬专转 诪讞讚诇 `%s'%s) "
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
#, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
+"讛讗诐 讘专爪讜谞讱 诇讗驻砖专 诇诪砖转诪砖讬诐 诇砖转祝 讞诇拽 诪讛转讬拽讬讜转 砖诇讛诐?\n"
+"讛住讻诪转讱 诇注砖讜转 讝讗转 转讗驻砖专 诇诪砖转诪砖 驻砖讜讟 诇诇讞讜抓 注诇 \"砖转祝\" 讘拽讜谞拽讬讜专讜专 讜讘谞讗讜讟讬诇住.\n"
+"\n"
+"\" 讛转讗诪讛 讗讬砖讬转\" 转讗驻砖专 讛转讗诪讛 诇讻诇 诪砖转诪砖.\n"
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want to click on this button?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇诇讞讜抓 注诇 讻驻转讜专 讝讛?"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Button `%s': %s"
-msgstr "讻驻转讜专 `%s': %s"
+msgid "China (broadcast)"
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "讘讞讬专讛 砖诇讱? (0/1, 讘专讬专转 诪讞讚诇 `%s') "
+msgid "Use quota for backup files."
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Configuring printer \"%s\"..."
+msgstr "诪讙讚讬专 讗转 诪讚驻住转 \"%s\"..."
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Internet connection"
+msgstr "讞讬讘讜专 讗讬谞讟专谞讟"
#: ../../modules/interactive.pm:1
#, c-format
@@ -8027,287 +7950,281 @@ msgstr ""
"讟注讬谞转 讛诪讜讚讜诇 %s 谞讻砖诇讛.\n"
"讛讗诐 讘专爪讜谞讱 诇谞住讜转 砖讜讘 注诐 驻专诪讟专讬诐 讗讞专讬诐?"
-#: ../../modules/interactive.pm:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Specify options"
-msgstr "爪讬讬谉 讗驻砖专讜讬讜转"
+msgid "Welcome to the Open Source world."
+msgstr "讘专讜讻讬诐 讛讘讗讬诐 诇注讜诇诐 讛拽讜讚 讛驻转讜讞."
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Autoprobe"
-msgstr "讞讬驻讜砖 讗讜讟讜诪讟讬"
+msgid "Bosnia and Herzegovina"
+msgstr "讘讜住谞讬讛-讛专爪讙讜讘讬谞讛"
-#: ../../modules/interactive.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
msgstr ""
+"讞讜讘讛 注诇讬讱 诪注专讻转 拽讘爪讬诐 讗诪讬转讬转 (ext2/ext3, reiserfs, xfs, or jfs) 讘砖讘讬诇 谞拽讜讚转 "
+"讛讞讬讘讜专 讛讝讜\n"
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "讗讬讝讛 诪谞讛诇 讛转拽谉 %s 讗谞讬 爪专讬讱 诇谞住讜转?"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "讞讜讘讛 注诇讬讱 诇讛讻谞讬住 砖诐 诪讗专讞 讗讜 讻转讜讘转 IP.\n"
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
-msgid "Module options:"
-msgstr "讗驻砖专讜讬讜 诪讜讚讜诇:"
+msgid "Netherlands"
+msgstr "讛讜诇谞讚"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Sending files by FTP"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr "诪讜讚诐 ISDN 驻谞讬诪讬"
+
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr "讗讬谉 讗诇讟专谞讟讬讘讜转 OSS 讗讜 ALSA 诇讻专讟讬住 讛拽讜诇 砖诇讱 (%s) 讗砖专 诪砖转诪砖 讻专讙注 讘\"%s\""
-#: ../../modules/interactive.pm:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "(module %s)"
-msgstr "(诪讜讚讜诇 %s)"
+msgid "Title"
+msgstr "讻讜转专转"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "诪转拽讬谉 诪谞讛诇 讛转拽谉 诇讻专讟讬住 %s %s"
+msgid "Install & convert Fonts"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "See hardware info"
-msgstr "爪驻讬讬讛 讘诪讬讚注 讞讜诪专讛"
+msgid "WARNING"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "讛讗诐 讬砖 诇讱 诪诪砖拽讬 %s 讻诇砖讛诐?"
+msgid "Installing bootloader"
+msgstr "诪转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转"
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you have another one?"
-msgstr "讛讗诐 讬砖 诇讱 注讜讚 讗讞讚?"
+msgid "replay"
+msgstr ""
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "诪爪讗 %s %s 诪诪砖拽讬诐"
+msgid "detected %s"
+msgstr "讝讜讛讛 %s"
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "讘讗驻砖专讜转讱 诇讛讙讚讬专 讻诇 驻专诪讟专 诪讛诪讜讚讜诇 讻讗谉."
+msgid "Virgin Islands (U.S.)"
+msgstr "讗讬讬 讛讘转讜诇讛 讛讗诪拽专讬讬诐"
-#: ../../modules/parameters.pm:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "comma separated strings"
+msgid "Bad backup file"
+msgstr "拽讜讘抓 讙讬讘讜讬 讙专讜注"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "comma separated numbers"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "%d comma separated strings"
+msgid "Pipe into command"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"讞诇拽 诪讛讞讜诪专讛 注诇 讛诪讞砖讘 砖诇讱 爪专讬讻讛 诪谞讛诇讬 讛转拽谉 ''诪转讗讬诪讬诐'' 讻讚讬 诇驻注讜诇.\n"
+"讗驻砖专 诇诪爪讜讗 诪讬讚注 注诇讬讛诐 讘%s"
-#: ../../modules/parameters.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "a number"
-msgstr "诪住驻专"
+msgid "Detecting devices..."
+msgstr "诪讝讛讛 讛转拽谞讬诐..."
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Click here to launch the wizard ->"
msgstr ""
-"谞讗 诇讛讜专讬讚 讗转 讛诪讬拽专讜-拽讜讚 砖诇 alcatal.\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"讜诇讛注转讬拽 讛拽讜讘抓 mgmt.o 诇转讬拽讬讬讛 /usr/share/speedtouch"
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Haiti"
+msgstr "讛讗讬讟讬"
+
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Description of the fields:\n"
+"\n"
msgstr ""
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Connect to the Internet"
-msgstr "讞讬讘讜专 诇讗讬谞讟专谞讟"
+msgid "the name of the CPU"
+msgstr "砖诐 讛诪注讘讚 讛专讗砖讬"
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (using pppoa) usb"
+msgid "Refreshing printer data..."
+msgstr "诪专注谞谉 诪讬讚注 注诇 讛诪讚驻住转..."
-#: ../../network/adsl.pm:1
+#: ../../install2.pm:1
#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "You must also format %s"
+msgstr "讞讜讘讛 注诇讬讱 讙诐 诇驻专诪讟 %s"
-#: ../../network/adsl.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "use dhcp"
-msgstr "砖讬诪讜砖 讘 dhcp"
+msgid "Be careful: this operation is dangerous."
+msgstr "讛砖诪专/讬: 驻注讜诇讛 讝讜 诪住讜讻谞转."
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "use pptp"
-msgstr "砖讬诪讜砖 讘 pptp"
+msgid "Insert a floppy containing package selection"
+msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 讛讻讜诇诇 讘讞讬专转 讞讘讬诇讜转"
-#: ../../network/adsl.pm:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "use pppoe"
-msgstr "砖讬诪讜砖 讘 pppoe"
+msgid "Server: "
+msgstr "砖专转:"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Other ports"
-msgstr "驻讜专讟讬诐 讗讞专讬诐"
+msgid "Security Alerts:"
+msgstr "讛转专讗讜转 讗讘讟讞讛:"
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Everything (no firewall)"
-msgstr "讛讻诇 (诇诇讗 讞讜诪转 讗砖)"
+msgid "Sweden"
+msgstr "住讜讚谉"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "Use Expect for SSH"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
+msgid "Poland"
+msgstr "驻讜诇讬谉"
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+msgid "Importance: %s\n"
+msgstr "讞砖讬讘讜转/注专讱: %s\n"
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+msgid "Please check if you want to eject your tape after the backup."
msgstr ""
#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
+msgid "Other ports"
+msgstr "驻讜专讟讬诐 讗讞专讬诐"
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "No network card"
-msgstr "讗讬谉 讻专讟讬住 专砖转"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "POP and IMAP Server"
-msgstr "砖专转 POP 讜IMAP"
+msgid "SMBus controllers"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Mail Server"
-msgstr "砖专转 讚讜讗诇"
+msgid "Connection timeout (in sec)"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Domain Name Server"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Web Server"
+msgid "Croatian"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "Use existing partition"
+msgstr "砖讬诪讜砖 讘诪讞讬爪讛 拽讬讬诪转"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Host name"
-msgstr "砖诐 诪讗专讞"
+msgid "Unable to contact mirror %s"
+msgstr "诇讗 讬讻讜诇 诇爪讜专 拽砖专 讗转 讗转专 讛诪专讗讛 %s"
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Zeroconf Host name"
+msgid "/Help/_About..."
+msgstr "/注讝专讛/_注诇 讝讛..."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remove user directories before restore."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network"
-msgstr "诪讙讚讬专 专砖转"
+msgid "CUPS printer configuration"
+msgstr "讛讙讚专转 诪讚驻住转 CUPS"
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "could not find any font in your mounted partitions"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose the network interface"
-msgstr ""
+msgid "F00f bug"
+msgstr "讘讗讙 F00f"
-#: ../../network/ethernet.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "XFree %s"
msgstr ""
#: ../../network/ethernet.pm:1
@@ -8319,1136 +8236,1295 @@ msgstr ""
"讘讗讬讝讛 诇拽讜讞 dhcp 讘专爪讜谞讱 诇讛砖转诪砖?\n"
"讘专讬专转 讛诪讞讚诇 讛讬讗 dhcp-client."
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "诇讗 谞诪爪讗 讻专讟讬住 ISDN 诪住讜讙 PCI. 谞讗 诇讘讞讜专 讗讞讚 讘诪住讱 讛讘讗."
+msgid "Domain Name:"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "On Floppy"
+msgstr "注诇 讛讚讬住拽讟"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Which of the following is your ISDN card?"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ISDN Configuration"
-msgstr "讛讙讚专转 ISDN"
+msgid "Looking for available packages..."
+msgstr "诪讞驻砖 讞讘讬诇讜转 讝诪讬谞讜转..."
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Abort"
-msgstr "讘讬讟讜诇"
+msgid "Init Message"
+msgstr "诪讝讛讛 讛讜讚注讛"
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Continue"
-msgstr "讛诪砖讱"
+msgid "Rescue partition table"
+msgstr "讛爪诇 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
+msgid "Connection complete."
+msgstr "讛转讞讘专讜转 讛讜砖诇诪讛."
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "I don't know"
-msgstr "诇讗 讬讚讜注"
+msgid "Cyprus"
+msgstr "拽驻专讬住讬谉"
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Remove from RAID"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "诪驻转讞 讛讛爪驻谞讛 驻砖讜讟 诪讬讚讬讬 讜讞讬讬讘 诇讛讬讜转 讘讗讜专讱 砖诇 诇驻讞讜转 %d 转讜讜讬诐"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "What kind of card do you have?"
-msgstr "讗讬讝讛 住讜讙 讻专讟讬住 讬砖 诇讱?"
+msgid "Configuration Wizards"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "诪爪讗 诪诪砖拽 \"%s\", 讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘讜?"
+msgid "ISDN connection"
+msgstr "讞讬讘讜专 ISDN"
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "讘讗讬讝讛 驻专讜讟讜拽讜诇 讘专爪讜谞讱 诇讛砖转诪砖?"
+msgid "primary"
+msgstr "专讗砖讬"
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "驻专讜讟讜拽讜诇 诇砖讗专 讛注讜诇诐"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "注诇 砖专转 SMB/讞诇讜谞讜转 \"%s\", 砖讬转讜祝 \"%s\""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "European protocol"
-msgstr ""
+msgid "Skip"
+msgstr "讚讬诇讜讙"
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "European protocol (EDSS1)"
+msgid "Niue"
msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
-"讬砖 诇讘讞讜专 讗转 住驻拽 讛讞讜诪专讛 砖诇讱.\n"
-"讗诐 讝讛 诇讗 讘专砖讬诪讛 讬砖 诇讘讞讜专 \"诇讗 讘专砖讬诪讛\"."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "诪讜讚诐 ISDN 讞讬爪讜谞讬"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "诪讜讚诐 ISDN 驻谞讬诪讬"
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "讗讬讝讛 住讜讙 讛讜讗 住讜讙 讞讬讘讜专 讛ISDN 砖诇讱?"
-
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "讗砖祝 讛讙讚专讜转 讛专砖转"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "讛讙讚专讛 讬砖谞讛 (isdn4net)"
+msgid "important"
+msgstr "讞砖讜讘"
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "New configuration (isdn-light)"
-msgstr "讛讙讚专讛 讞讚砖讛 (isdn-light)"
+msgid "Total Progress"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Which ISDN configuration do you prefer?\n"
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-" tools, but is tricky to configure, and not standard.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
"\n"
-"We recommand the light configuration.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
msgstr ""
+"讘转讞讬诇讛 讬讘讜爪注 讝讬讛讜讬 讛转拽谞讬 IDE 砖讘诪讞砖讘讱 注诇 讬讚讬 DrakX 砖讙诐 讬住专讜拽 讗讞专 讗讞讚 讗讜\n"
+" 讬讜转专 讻专讟讬住讬 PCI SCSI 讘诪注专讻转 砖诇讱. 讗诐 讻专讟讬住 SCSI 谞诪爪讗, DrakX 讬转拽讬谉 诪谞讛诇 讛转拽谉\n"
+" 诪转讗讬诐 讘讗讜驻谉 讗讜讟讜诪讟讬.\n"
+" \n"
+" \n"
+" 讘讙诇诇 砖讝讬讛讜讬 讛讞讜诪专讛 讛讗讜讟讜诪讟讬 讗讬谞讜 诪讜讘讟讞, DrakX 注诇讜诇 诇讛讬讻砖诇 讘讝讬讛讜讬 讛讻讜谞谞讬诐 "
+"讛拽砖讬讞讬诐\n"
+" 讛诪讜转拽谞讬诐 讘诪讞砖讘讱. 讘诪拽专讛 砖讻讝讛 讬讛讬讛 注诇讬讱 诇讛讙讚讬专 讗转 讛讞讜诪专讛 砖讘专砖讜转讱 讘讗讜驻谉 讬讚谞讬.\n"
+" \n"
+" \n"
+" 讗诐 讛讬讛 注诇讬讱 诇讛讙讚讬专 诪转讗诐 PC SCSI 讘讗讜驻谉 讬讚谞讬, DraxX 讬砖讗诇 讗诐 讘专爪讜谞讱 诇注讚讻谉 讗转\n"
+" 讛讛讙讚专讜转 注讘讜专讜. 注诇讬讱 诇讗驻砖专 诇 DrakX 诇住专讜拽 讗转 讛讞讜诪专讛 讗讞专 讛讙讚专讜转 讬讬讞讜讚讬讜转 "
+"诇讻专讟讬住\n"
+" 讗砖专 讚专讜砖讜转 诇讗讬转讞讜诇 讛诪转讗诐. 讘专讜讘 讛诪拽专讬诐 DrakX 讬爪诇讬讞 诇讛砖诇讬诐 砖诇讘 讝讛 诇诇讗 讘注讬讜转\n"
+" 诪讬讜讞讚讜转.\n"
+" \n"
+" \n"
+" 讗诐 DrakX 谞讻砖诇 讘讗讬转讜专 讛讗讜讟讜诪讟讬 砖诇 讛驻专诪讟专讬诐 讛谞讚专砖讬诐 注讘讜专 讛讞讜诪专讛, 讬讛讬讛 注诇讬讱\n"
+" 诇讛讙讚讬专 讗转 诪谞讛诇 讛讛转拽谞讬诐 讘注爪诪讱."
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do nothing"
-msgstr "诇讗 诇注砖讜转 讻诇讜诐"
+msgid "Users"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install rpm"
-msgstr "讛转拽谉 专驻诪"
+msgid "Aruba"
+msgstr "讗专讜讘讛"
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr "诪讜讚诐 \"%s\" 诪住讜讙 winmodem 讝讜讛讛, 讛讗诐 讘专爪讜谞讱 诇讛转拽讬谉 讗转 讛转讜讻谞讛 讛讚专讜砖讛?"
+msgid "Preparing bootloader..."
+msgstr "诪讻讬谉 讗转 诪讗转讞诇 讛诪注专讻转..."
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Title"
-msgstr "讻讜转专转"
+msgid "Gateway (e.g. %s)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"讛诪讜讚诐 砖诇讱 讗讬谞讜 谞转诪讱 注诇 讬讚讬 讛诪注专讻转.\n"
-"转注讬驻讜 诪讘讟 讘http://www.linmodems.org"
+msgid "The passwords do not match"
+msgstr "讛住讬住诪讗讜转 诇讗 讝讛讜转"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "砖专转 DNS 砖谞讬 (讗讜驻爪讬讛)"
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "砖专转 DNS 专讗砖讜谉 (讗讜驻爪讬讛)"
+msgid "Frequency (MHz)"
+msgstr "转讚讬专讜转 (MHz)"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Domain name"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
+"讻讚讬 诇讛砖转诪砖 讘讘讞讬专转 讛讞讘讬诇讜转 讛砖诪讜专讛, 讬砖 诇讛驻注讬诇 讗转 讛讛转拽谞讛 注诐 ``linux "
+"defcfg=floppy'' "
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "CHAP"
-msgstr ""
+msgid "the number of the processor"
+msgstr "诪住驻专 讛诪注讘讚"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Script-based"
-msgstr ""
+msgid "Hardware clock set to GMT"
+msgstr "砖注讜谉 诪注专讻转 诪讜讙讚专 诇GNT"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Terminal-based"
-msgstr "诪讘讜住住-诪注讟驻转"
+msgid "Give a file name"
+msgstr "讛讻谞住/讬 砖诐 拽讜讘抓"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "PAP"
+msgid "Please choose the port that your printer is connected to."
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/livedrake:1
#, c-format
-msgid "Login ID"
-msgstr ""
+msgid "Change Cd-Rom"
+msgstr "讛讞诇驻转 Cd-Rom"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Phone number"
-msgstr "诪住驻专 讟诇驻讜谉"
+msgid "Paraguay"
+msgstr "驻专讙讜讜讗讬"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Connection name"
-msgstr "砖诐 讛转讞讘专讜转"
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
+msgstr ""
-#: ../../network/modem.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Dialup options"
-msgstr "讗驻砖专讜讬讜转 讞讬讜讙 诇专砖转"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "讗讬谉 驻讛 诪谞讛诇 讛转拽谉 讬讚讜注 诇讻专讟讬住 讛拽讜诇 砖诇讱 (%s)"
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
+msgid "force"
+msgstr "讛讻专讞/讬"
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network Configuration"
-msgstr "讛讙讚专转 讛专砖转"
+msgid "Exit"
+msgstr "讬爪讬讗讛"
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+msgid "Estonian"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
-"拽专转讛 转拽诇讛 讘注转 谞住讬讜谉 诇讛驻注讬诇 诪讞讚砖 讗转 讛专砖转: \n"
-"\n"
-"%s"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "讛专砖转 爪专讬讻讛 诇讗转讞诇 诪讞讚砖. 讛讗诐 讘专爪讜谞讱 诇转转 诇讛 诇讛转讗转讞诇?"
+msgid "Add/Del Clients"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Network configuration"
-msgstr "讛讙讚专转 讛专砖转"
+msgid "Choose the network interface"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讛转讞讬诇 讗转 讛讛转讞讘专讜转 讘讝诪谉 讛讗转讞讜诇?"
+msgid "Unknown Model"
+msgstr "诪讜讚诇 诇讗 讬讚讜注"
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Internet connection"
-msgstr "讞讬讘讜专 讗讬谞讟专谞讟"
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
msgstr ""
+"诪讞讬爪讛 诪讗转讞诇转 讻讘专讬专转 诪讞讚诇\n"
+" (诇讗转讞讜诇 诪讚讜住, 诇讗 诪Lilo)\n"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "讬砖 诇讘讞讜专 讞讬讘讜专 砖讘专爪讜谞讱 诇注专讜讱"
+msgid "choose image"
+msgstr "讬砖 诇讘讞讜专 拽讜讘抓 转诪讜谞讛 "
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "讻专讟讬住讬 专砖转 讝讜讛讜"
+msgid "Firewalling configuration detected!"
+msgstr "讛讙讚专讜转 讞讜诪转 讗砖 讝讜讛讜!"
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "LAN connection"
-msgstr "讞讬讘讜专 专砖转 驻谞讬诪讬转"
+msgid "Connection name"
+msgstr "砖诐 讛转讞讘专讜转"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "cable connection detected"
-msgstr "讞讬讘讜专 讻讘诇讬诐 讝讜讛讛"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Cable connection"
-msgstr "讞讬讘讜专 讻讘诇讬诐"
+msgid "Updating package selection"
+msgstr "讘讞讬专转 注讚讻讜谉 讞讘讬诇讜转"
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "detected"
-msgstr "讝讜讛讛"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "讗讬驻讛 讘专爪讜谞讱 诇讞讘专 讗转 拽讜讘抓 讛loopback 讘砖诐 %s?"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "ADSL connection"
-msgstr "讞讬讘讜专 ADSL"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "detected %s"
-msgstr "讝讜讛讛 %s"
+msgid "the number of buttons the mouse has"
+msgstr "诪住驻专 讛诪拽砖讬诐 砖讬砖 诇注讻讘专"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "ISDN connection"
-msgstr "讞讬讘讜专 ISDN"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Winmodem connection"
-msgstr "讞讬讘讜专 诪讜讚诐-讞诇讜谞讜转 (Winmodem)"
+msgid "Replay"
+msgstr "讛驻注诇 诪讞讚砖"
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "detected on port %s"
-msgstr "讝讜讛讛 讘驻讜专讟 %s"
+msgid "Backup other files"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Normal modem connection"
-msgstr "讞讬讘讜专 诪讜讚诐 专讙讬诇"
+msgid "No floppy drive available"
+msgstr "讗讬谉 讻讜谞谉 讚讬住拽讟讬诐 讝诪讬谉"
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Detecting devices..."
-msgstr "诪讝讛讛 讛转拽谞讬诐..."
+msgid "Backup files are corrupted"
+msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Expert Mode"
-msgstr "诪爪讘 诪讜诪讞讛"
+msgid "TV norm:"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Use auto detection"
-msgstr "砖讬诪讜砖 讘讝讬讛讜讬 讗讜讟讜诪讟讬"
+msgid "Cpuid family"
+msgstr "诪砖驻讞转 Cpuid"
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Choose the profile to configure"
-msgstr "讘讞专 驻专讜驻讬诇 诇讛讙讚专讛"
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "Lithuanian AZERTY (new)"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
#, c-format
msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
-"\n"
-"\n"
-"\n"
-"讗谞讜 注讜诪讚讬诐 诇讛讙讚讬专 讗转 讞讬讘讜专 讛%s.\n"
-"\n"
-"\n"
-"讬砖 诇诇讞讜抓 讗讬砖讜专 讻讚讬 诇讛诪砖讬讱."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "讗谞讜 注讜诪讚讬诐 诇讛讙讚讬专 讗转 讞讬讘讜专 讛%s."
+msgid "Previous"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Internet connection & configuration"
-msgstr "讞讬讘讜专 讗讬谞讟专谞讟 讜讛讙讚专讜转"
+msgid "Other OS (MacOS...)"
+msgstr "诪注专讻转 讛驻注诇讛 讗讞专转(MacOS...)"
-#: ../../network/netconnect.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configure the connection"
-msgstr "讛讙讚专转 讛讞讬讘讜专"
+msgid "To activate the mouse,"
+msgstr "诇讛驻注诇转 讛注讻讘专,"
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Disconnect"
-msgstr "谞讬转讜拽"
+msgid "Bringing up the network"
+msgstr "诪注诇讛 讗转 讛专砖转"
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Connect"
-msgstr "讛转讞讘专讜转"
+msgid "Screenshots will be available after install in %s"
+msgstr "转诪讜谞讜转 诪住讱 讬讛讬讜 讝诪讬谞讜转 诇讗讞专 讛转拽谞讛 讘%s"
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
"\n"
-"You can reconfigure your connection."
-msgstr ""
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
"\n"
-"讬砖 讘讗驻砖专讜转讱 诇讛讙讚讬专 诪讞讚砖 讗转 讗转 讛讞讬讘讜专 砖诇讱."
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Tanzania"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "You are not currently connected to the Internet."
+msgid "Computing FAT filesystem bounds"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
msgstr ""
-"\n"
-"讘讗驻砖专讜转讱 诇讛转谞转拽 讗讜 诇讛讙讚讬专 诪讞讚砖 讗转 讛讞讬讘讜专 砖诇讱."
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You are currently connected to the Internet."
-msgstr ""
+msgid "Content of the file"
+msgstr "转讻讜诇转 讛拽讜讘抓"
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
+msgid "Authentication LDAP"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Proxy should be http://..."
-msgstr "驻专讜拽住讬 爪专讬讱 诇讛讬讜转 http://..."
+msgid "Let me pick any driver"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FTP proxy"
-msgstr "驻专讜拽住讬 FTP"
+msgid "Profile "
+msgstr "驻专讜驻讬诇"
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "HTTP proxy"
-msgstr "驻专讜拽住讬 HTTP"
+msgid "transmitted"
+msgstr "讛讜注讘专"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Proxies configuration"
-msgstr "讛讙讚专讜转 驻专讜拽住讬诐"
+msgid "Palestine"
+msgstr "驻诇住讟讬谉"
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
+msgid "RAID md%s\n"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
+msgid "%d comma separated strings"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Gateway device"
-msgstr ""
+msgid "Here is the full list of keyboards available"
+msgstr "讛谞讛 讛专砖讬诪讛 讛诪诇讗讛 砖诇 讛诪拽诇讚讜转 讛讝诪讬谞讜转"
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
+msgid "Theme name"
+msgstr "砖诐 注专讻转 谞讜砖讗"
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "DNS server"
-msgstr "砖专转 DNS"
+msgid "/_Help"
+msgstr "/_注讝专讛"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
+"讻讗谉 讘讗驻砖专讜转讱 诇讘讞讜专 讗诐 讛住讜专拽讬诐 讛诪讞讜讘专讬诐 诇诪讞砖讘 讝讛 讬讜讻诇讜 诇讛讬讜转 讝诪讬谞讬诐 诇诪讞砖讘讬诐 "
+"诪专讜讞拽讬诐."
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "the width of the progress bar"
+msgstr "专讜讞讘 驻住 讛讛转拽讚诪讜转"
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Cook Islands"
msgstr ""
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "讻转讜讘转 IP 爪专讬讻讛 诇讛专讗讜转 讻讻讛 1.2.3.4"
-
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Start at boot"
-msgstr "讛转讞诇 讘讗转讞讜诇"
+msgid "Formatting partition %s"
+msgstr "诪驻专诪讟 诪讞讬爪讛 - %s"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Assign host name from DHCP address"
+msgid "Hostname required"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Network Hotplugging"
-msgstr "讞讬讘讜专讬 专砖转 讞诪讬诐"
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
+msgid "Cancel"
+msgstr "讘讬讟讜诇"
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "DHCP host name"
-msgstr "砖诐 诪讗专讞 DHCP"
+msgid "Searching for configured scanners ..."
+msgstr "诪讞驻砖 住讜专拽讬诐 诪讜讙讚专讬诐..."
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Netmask"
-msgstr ""
+msgid "Wheel"
+msgstr "注诐 讙诇讙诇转"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "IP address"
-msgstr "讻转讜讘转 IP"
+msgid "Videocard"
+msgstr "讻专讟讬住 诪住讱"
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "(bootp/dhcp/zeroconf)"
+msgid "\tBackups use tar and bzip2\n"
msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Automatic IP"
-msgstr "IP 讗讜讟讜诪讟讬"
+msgid "Remove Selected"
+msgstr ""
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " (driver %s)"
-msgstr "(诪谞讛诇 讛转拽谉 %s)"
+msgid "/Autodetect _modems"
+msgstr "/讝讬讛讜讬 讗讜讟讜诪讟讬 砖诇 _诪讜讚诪讬诐"
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Configuring network device %s"
-msgstr "诪讙讚讬专 讛转拽谉 专砖转 %s"
+msgid "Remove printer"
+msgstr "讛住专转 诪讚驻住转"
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
#, c-format
msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""
-#: ../../network/shorewall.pm:1
+#: ../../standalone/logdrake:1
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
msgstr ""
+"讘专讜讻讬诐 讛讘讗讬诐 诇讻诇讬 讛讙讚专讜转 讛讚讜讗诇.\n"
+"\n"
+"讻讗谉, 转讜讻诇讜 诇讛讙讚讬专 讗转 诪注专讻转 讛讛址转职专指讗指讜转.\n"
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "讛讙讚专讜转 讞讜诪转 讗砖 讝讜讛讜!"
+msgid "Other"
+msgstr "讗讞专"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
-msgid "Account Password"
-msgstr "住讬住诪讗转 讞砖讘讜谉"
+msgid "Default"
+msgstr "讘专讬专转 诪讞讚诇"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Account Login (user name)"
-msgstr "讻谞讬住讛 诇讞砖讘讜谉 (砖诐 诪砖转诪砖)"
+msgid "Button 2 Emulation"
+msgstr "讛讚诪讬讬转 讻驻转讜专 砖谞讬"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection timeout (in sec)"
+msgid "type1inst building"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Connection speed"
-msgstr "诪讛讬专讜转 讞讬讘讜专"
+msgid "Abiword"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Dialing mode"
-msgstr "诪爪讘 讛转拽砖专讜转"
+msgid "choose image file"
+msgstr "讬砖 诇讘讞讜专 拽讜讘抓 转诪讜谞讛"
-#: ../../network/tools.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Choose your country"
-msgstr "讘讞讬专转 讗专抓"
+msgid "X server"
+msgstr "砖专转 X"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Provider dns 2 (optional)"
+msgid "Domain Admin User Name"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr ""
+msgid "There was an error while scanning for TV channels"
+msgstr "讛讬讬转讛 砖讙讬讗讛 讘讝诪谉 住专讬拽转 注专讜爪讬 讟诇讜讜讬讝讬讛"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Provider phone number"
-msgstr "诪住驻专 讛讟诇驻讜谉 砖诇 讛住驻拽"
+msgid "US keyboard (international)"
+msgstr "诪拽诇讚转 讗专讛\"讘 (讘讬谞诇讗讜诪讬转)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "砖诐 讛住驻拽 (诇讚讜讙诪讗 provider.net)"
+msgid "Not installed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Your personal phone number"
-msgstr "诪住驻专 讛讟诇驻讜谉 讛驻专讟讬 砖诇讱"
+msgid "LAN connection"
+msgstr "讞讬讘讜专 专砖转 驻谞讬诪讬转"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Card IO_1"
-msgstr ""
+msgid "/File/-"
+msgstr "/拽讜讘抓/-"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Card IO_0"
+msgid "Italian"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
-msgid "Card IO"
-msgstr ""
+msgid "Basic"
+msgstr "讘住讬住讬转"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Card mem (DMA)"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
msgstr ""
+#: ../../lang.pm:1
+#, c-format
+msgid "Honduras"
+msgstr "讛讜谞讚讜专住"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr "pdq"
+
#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Card IRQ"
+msgid "Card IO"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please fill or check the field below"
+msgid "when checked, owner and group won't be changed"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Connection Configuration"
-msgstr "讛讙讚专转 讞讬讘讜专"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"诪讞讬爪转 专爪讜注转 讛讗转讞讜诇 \n"
+"讛诪讬讜讞讚转 讛讝讗转 讛讬讗 讘砖讘讬诇\n"
+"讗转讞讜诇 讻驻讜诇 砖诇 讛诪注专讻转 砖诇讱.\n"
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr ""
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr "讘讗驻砖专讜转讱 讙诐 诇讛讞诇讬讟 讗诐 住讜专拽讬诐 注诇 诪讞砖讘讬诐 诪专讜讞拽讬诐 讬讛讬讜 讝诪讬谞讬诐 诇诪讞砖讘 讝讛."
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The system is now connected to the Internet."
+msgid "\t-Network by FTP.\n"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Testing your connection..."
-msgstr "讘讜讚拽 讗转 讛诪注专讻转 砖诇讱..."
+msgid "Russian (Yawerty)"
+msgstr "专讜住讬转 (Yawerty)"
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇谞住讜转 诇讛转讞讘专 诇讗讬谞讟专谞讟 注讻砖讬讜?"
+msgid "You must enter a device or file name!"
+msgstr ""
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Internet configuration"
-msgstr "讛讙讚专转 专砖转"
+msgid "/_Quit"
+msgstr "/_讬爪讬讗讛"
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
+"谞讗 诇讛讜专讬讚 讗转 讛诪讬拽专讜-拽讜讚 砖诇 alcatal.\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"讜诇讛注转讬拽 讛拽讜讘抓 mgmt.o 诇转讬拽讬讬讛 /usr/share/speedtouch"
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid " (Default)"
-msgstr "(讘专讬专转 诪讞讚诇)"
+msgid "Graphics memory: %s kB\n"
+msgstr "讝讬讻专讜谉 讻. 诪住讱: %s kB\n"
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "注诇 砖专转 CUPS \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+"转讜讻谞讛 讝讜 讛讬讗 转讜讻谞讛 讞讜驻砖讬转; 讘讗驻砖专讜转讱 诇砖谞讜转讛 讗讜 诇讛驻讬爪讛 讗讜转讛 诪讞讚砖 转讞转 专砖讬讜谉\n"
+"讛GPL 讘讙讬专住讗 2 讗讜 讙讬专住讗 诪讗讜讞专转 讬讜转专.\n"
+"讛讗讞专讬讜转 注诇 砖讬诪讜砖 讘转讜讻谞讛 讝讜 讞诇讛 注诇 讛诪砖转诪砖 讘诇讘讚.\n"
+"注诇讬讱 诇拽讘诇 注讜转拽 砖诇 GPL 注诐 转讜讻谞讬转 讝讜; 讗诐 诇讗 讻讱 讛讚讘专, 讬砖 诇讻转讜讘 讗诇\n"
+"Free software Foundation, \n"
+" Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Printers"
-msgstr "诪讚驻住讜转 专讞讜拽讜转"
+msgid "access to compilation tools"
+msgstr "讻谞讬住讛 诇讻诇讬 讛讬讚讜专"
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please select data to restore..."
+msgstr ""
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "(on this machine)"
-msgstr "(注诇 讛诪注专讻转 讛讝讜)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘aboot, 讬砖 诇讛讬讝讛专 诇讛砖讗讬专 诪拽讜诐 驻谞讜讬 (2048 住拽讟讜专讬诐 讝讛 "
+"诪住驻讬拽) \n"
+"讘转讞讬诇转 讛讚讬住拽"
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "(on %s)"
-msgstr "(注诇 %s)"
+msgid "Standard test page"
+msgstr "讚祝 谞住讬讜谉 专讙讬诇"
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - 诪注专转 讛讚驻住讛 谞驻讜爪讛 砖诇 讬讜谞讬拽住"
+msgid "Create"
+msgstr "讬爪讬专讛"
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "What"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR 讛讚讜专 讛讞讚砖 砖诇"
+msgid "There was an error ordering packages:"
+msgstr "讛转专讞砖讛 砖讙讬讗讛 讘拽专讬讗讛 诇讞讘讬诇讜转 (讗讜 住讬讚讜专 讞讘讬诇讜转):"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Bulgarian (BDS)"
+msgstr ""
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid "Disable Server"
msgstr ""
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Filesystem encryption key"
+msgstr "诪驻转讞 讛讛爪驻谞讛 砖诇 讛诪注专讻转"
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - 讛讚驻住, 讗诇 转诪转讬谉"
+msgid "Gujarati"
+msgstr ""
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Unknown Model"
-msgstr "诪讜讚诇 诇讗 讬讚讜注"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Unknown model"
-msgstr "诪讜讚诇 诇讗 讬讚讜注"
+msgid "Save theme"
+msgstr "砖诪讬专转 注专讻转 谞讜砖讗"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
+msgid "group"
+msgstr "拽讘讜爪讛"
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Host %s"
-msgstr "诪讗专讞 %s"
+msgid "Brazil"
+msgstr "讘专讝讬诇"
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Network %s"
-msgstr "专砖转 %s"
+msgid "Auto Install"
+msgstr "讛转拽谞讛 讗讜讟讜诪讟讬转"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
-msgid "Interface \"%s\""
-msgstr "诪诪砖拽 \"%s\""
+msgid "Network Configuration Wizard"
+msgstr "讗砖祝 讛讙讚专讜转 讛专砖转"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Local network(s)"
-msgstr "专砖转/讜转 诪拽讜诪讬讜转"
+msgid "Removable media automounting"
+msgstr "讞讬讘讜专 讗讜讟讜诪讟讬 砖诇 诪讚讬讛 谞砖诇驻转"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "Printing"
+msgstr "讛讚驻住讛"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", using command %s"
-msgstr ", 砖讬诪讜砖 讘驻拽讜讚讛 %s"
+msgid "Unkown driver"
+msgstr "诪谞讛诇 讛转拽谉 诇讗 讬讚讜注"
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "注诇 砖专转 谞讜讘诇 \"%s\", 诪讚驻住转 \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "诇讗 谞诪爪讗讛 诪讚驻住转 讛诪讞讜讘专转 讬砖讬专讜转 诇诪讞砖讘讱"
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "注诇 砖专转 SMB/讞诇讜谞讜转 \"%s\", 砖讬转讜祝 \"%s\""
+msgid "Create a new partition"
+msgstr "爪讜专 诪讞讬爪讛 讞讚砖讛"
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", 诪讗专讞 TCP/IP \"%s\", 驻讜专讟 %s"
+msgid "Driver:"
+msgstr "诪谞讛诇 讛转拽谉:"
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "注诇 砖专转 LPD - \"%s\" 诪讚驻住转 \"%s\""
+msgid "unknown"
+msgstr "诇讗 讬讚讜注"
-#: ../../printer/main.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ", printing to %s"
-msgstr ", 讛讚驻住讛 讗诇 %s"
+msgid "Use fdisk"
+msgstr "讛砖转诪砖 讘fdisk"
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", multi-function device"
-msgstr ", 讛转拽谉 专讘-讗驻砖专讜讬讜转"
+msgid "MOVE YOUR WHEEL!"
+msgstr "谞讗 诇讛讝讬讝 讗转 讛讙诇讙诇转 砖诇讱!"
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", 讛转拽谉 专讘-讗驻砖专讜讬讜转 注诇 HP JetDirect"
+msgid "sent: "
+msgstr "谞砖诇讞讜:"
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
+msgid "Automatic IP"
+msgstr "IP 讗讜讟讜诪讟讬"
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ", USB printer"
-msgstr ", 诪讚驻住转 USB"
+msgid "Kensington Thinking Mouse"
+msgstr "讛注讻讘专 讛讞讜砖讘 砖诇 Kensington"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ", USB printer \\#%s"
-msgstr ", 诪讚驻住转 USB \\#%s"
+msgid "Configuration of a remote printer"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid " on parallel port \\#%s"
-msgstr "注诇 驻讜专讟 驻专诇讗诇讬 \\#%s"
+msgid "Moldova"
+msgstr "诪讜诇讚讜讘讛"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printers"
-msgstr "诪讚驻住讜转 诪拽讜诪讬讜转"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Pipe job into a command"
-msgstr ""
+msgid "An online platform to respond to enterprise support needs."
+msgstr "驻诇讟驻讜专诪讛 诪拽讜讜谞转 诇转讙讜讘讛 诇爪专讻讬 诇讬讜讝诪转 爪专讻讬 转诪讬讻讛."
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enter a printer device URI"
+msgid "URL should begin with 'ftp:' or 'http:'"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Printer on NetWare server"
+msgid "Add a new rule at the end"
+msgstr "讛讜住驻讛 砖诇 讞讜拽 讞讚砖 讘住讜祝"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "诪讚驻住转 专砖转 (TCP/Socket)"
+msgid "Quit without writing the partition table?"
+msgstr "诇爪讗转 讘诇讬 诇专砖讜诐 诇砖讜诇讞谉 讛诪讞讬爪讜转?"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Printer on remote lpd server"
-msgstr "诪讚驻住转 注诇 砖专转 lpd 诪专讜讞拽"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "诪讚驻住转 注诇 砖专转 cups 诪专讜讞拽"
+msgid "Installing packages..."
+msgstr "诪转拽讬谉 讞讘讬诇讜转..."
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Remote printer"
-msgstr "诪讚驻住转 专讞讜拽讛"
+msgid "Dutch"
+msgstr ""
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local printer"
-msgstr "诪讚驻住转 诪拽讜诪讬转"
+msgid "The following packages need to be installed:\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configuring applications..."
-msgstr "诪讙讚讬专 讬讬砖讜诪讬诐..."
+msgid "Angola"
+msgstr "讗谞讙讜诇讛"
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printerdrake"
-msgstr "讛讚驻住讚专讬讬拽"
+msgid "service setting"
+msgstr "讛讙讚专讜转 砖讬专讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "诪住讬专 讗转 诪讚驻住转 \"%s\"..."
+msgid "Custom"
+msgstr "诪讜转讗诐 讗讬砖讬转"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讛住讬专 讗转 讛诪讚驻住转 \"%s\"?"
+msgid "File is already used by another loopback, choose another one"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Remove printer"
-msgstr "讛住专转 诪讚驻住转"
+msgid "Read-only"
+msgstr "拽专讬讗讛-讘诇讘讚"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Learn how to use this printer"
-msgstr ""
+msgid "Latvia"
+msgstr "诇讟讜讜讬讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Print test pages"
-msgstr "讛讚驻住转 讚驻讬 谞住讬讜谉"
+msgid "No known driver"
+msgstr "讗讬谉 诪谞讛诇 讛转拽谉 讬讚讜注"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "谞讻砖诇 讘讛住专转 讛诪讚驻住转 \"%s\" 诪Star Office/OpenOffice.org/GIMP."
+msgid "1 MB"
+msgstr "1 MB"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "讛诪讚驻住转 \"%s\" 讛讜住专讛 讘讛爪诇讞讛 诪Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "诪住讬专 诪讚驻住转 诪Office/OpenOffice.org/GIMP."
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgid "Configure Local Area Network..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "谞讻砖诇 诇讛讜住讬祝 讗转 讛诪讚驻住转 \"%s\" 诇Star Office/OpenOffice.org/GIMP."
+msgid "Launch the sound system on your machine"
+msgstr "讟讜注谉 讗转 诪注专讻转 讛拽讜诇 注诇 讛诪讞砖讘 砖诇讱"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "讛诪讚驻住转 \"%s\" 讛讜住驻讛 讘讛爪诇讞讛 诇Star Office/OpenOffice.org/GIMP."
+msgid "Preparing printer database..."
+msgstr "诪讻讬谉 讗转 诪讗讙专 讛谞转讜谞讬诐 砖诇 讛诪讚驻住转..."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "诪讜住讬祝 诪讚驻住转 诇Star Office/OpenOffice.org/GIMP."
+msgid "Information"
+msgstr "诪讬讚注"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "No network card"
+msgstr "讗讬谉 讻专讟讬住 专砖转"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "讛诪讚驻住转 \"%s\" 诪讜讙讚专转 讻注转 讻诪讚驻住转 讘专讬专转 诪讞讚诇."
+msgid "Which filesystem do you want?"
+msgstr "讗讬讝讜 诪注专讻转 拽讘爪讬诐 讗转/讛 专讜爪讛?"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Default printer"
-msgstr "诪讚驻住转 讘专讬专转 诪讞讚诇"
+msgid "3 buttons"
+msgstr "3 讻驻转讜专讬诐"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Set this printer as the default"
-msgstr "讛讙讚专转 讛诪讚驻住转 讻讘专讬专转 诪讞讚诇"
+msgid "Detailed information"
+msgstr "诪讬讚注 诪驻讜专讟"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer options"
-msgstr "讗驻砖专讜讬讜转 诪讚驻住转"
+msgid "Malta"
+msgstr "诪诇讟讛"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer manufacturer, model"
-msgstr "讬爪专谉 诪讚驻住转, 诪讜讚诇"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"讛讙讚专讜转 讘专讬专转 讛诪讞讚诇 砖诇 讛诪讚驻住转\n"
+"\n"
+"注诇讬讱 诇讘讚讜拽 砖讘讗诪转 讙讜讚诇 讛讚祝 讜住讜讙 讛讚讬讜/诪爪讘 讛讛讚驻住讛 (讗诐 讗驻砖专) 讜讙诐 讻诇 讛讛讙讚专讜转 "
+"诪讜讙讚专讬诐 谞讻讜谉. 讬砖 诇砖讬诐 诇讘 砖注诐 讛讚驻住讛 讘讗讬讻讜转/专讝讜诇讜爪讬讛 讙讘讜讛讛 讛诪讚驻住转 注诇讜诇讛 诇讛讬讜转 "
+"诪讜讝谞转 讘讗讬讟讬讜转."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "讬爪专谉 诪讚驻住转, 诪讜讚诇, 诪谞讛诇 讛转拽谉"
+msgid "This floppy is not FAT formatted"
+msgstr "讚讬住拽讟 讝讛 讗讬谞讜 诪驻讜专诪讟 讻 FAT"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "诪住讬专 诪讚驻住转 讬砖谞讛 - \"%s\"..."
+msgid "Configuring network"
+msgstr "诪讙讚讬专 专砖转"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "Printer name, description, location"
-msgstr "砖诐 诪讚驻住转, 转讬讗讜专, 诪讬拽讜诐"
+msgid "Graphic Card"
+msgstr "讻专讟讬住 诪住讱"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Printer connection type"
-msgstr "住讜讙 讞讬讘讜专 诪讚驻住转"
+msgid "Resizing Windows partition"
+msgstr "诪砖谞讛 讙讜讚诇 诇诪讞讬爪转 讞诇讜谞讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Raw printer"
+msgid "Provider dns 1 (optional)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Do it!"
-msgstr "注砖讛 讝讗转!"
+msgid "Cameroon"
+msgstr "拽诪专讜谉"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"讘讗驻砖专讜转讱 讻专讙注 诇诪讞抓 讗转 %s.\n"
+"讻讗砖专 住讬讬诪转, 诇讗 诇砖讻讜讞 诇砖诪讜专 注诐 `w'"
#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9457,427 +9533,334 @@ msgstr "注砖讛 讝讗转!"
msgid "Close"
msgstr "住讙讜专"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-"诪讚驻住转 %s\n"
-"诪讛 讘专爪讜谞讱 诇讛讙讚讬专 讘诪讚驻住转 讝讜?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "砖讬谞讜讬 讛讙讚专讜转 诪讚驻住转"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "讛讜住驻转 诪讚驻住转 讞讚砖讛"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "诪爪讘 谞讜专诪诇讬"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Change the printing system"
-msgstr "讛讞诇驻转 诪注专讻转 讛讛讚驻住讛"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "CUPS configuration"
-msgstr "讛讙讚专转 CUPS"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "专讬注谞讜谉 专砖讬诪转 诪讚驻住讜转 (讻讚讬 诇讛爪讬讙 讗转 讻诇 诪讚驻住讜转 讛CUPS 讛诪专讜讞拽讜转 讛讝诪讬谞讜转)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "专讬注谞讜谉 专砖讬诪转 诪讚驻住讜转 (讻讚讬 诇讛爪讬讙 讗转 讻诇 诪讚驻住讜转 讛CUPS 讛诪专讜讞拽讜转 讛讝诪讬谞讜转)"
+msgid "Calendar"
+msgstr "诇讜讞 砖谞讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-"讛诪讚驻住讜转 讛讘讗讜转 诪讜讙讚专讜转. 讬砖 诇诇讞讜抓 驻注诪讬讬诐 注诇 诪讚驻住转 讻讚讬 诇砖谞讜转 讗转 讛讙讚专讜转讬讛; 讻讚讬 "
-"诇讛驻讜讱 讗讜转讛 诇诪讚驻住转 讘专讬专转 讛诪讞讚诇; 讗讜 讻讚讬 诇专讗讜转 诪讬讚注 注诇讬讛."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printing system: "
-msgstr "诪注专讻转 讛讛讚驻住讛:"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"讻讚讬 诇讛砖转诪砖 讘诪讚驻住转 lpd 诪专讜讞拽转, 注诇讬讱 诇住驻拽 讗转 砖诐 讛诪讗专讞 砖诇 砖专转 讛讛讚驻住讛 讜砖诐 讛诪讚驻住转 "
+"注诇 讛砖专转."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Checking installed software..."
-msgstr "讘讜讚拽 转讜讻谞讛 诪讜转拽谞转..."
+msgid "Iceland"
+msgstr "讗讬住诇谞讚"
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid "Installing Foomatic..."
-msgstr ""
+msgid "consolehelper missing"
+msgstr "注讜讝专-讛诪注讟驻转 讞住专(consolehelper)"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr ""
+msgid "stopped"
+msgstr "谞注爪专"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "诪讙讚讬专 讗转 诪讚驻住转 \"%s\"..."
+msgid "Whether the FPU has an irq vector"
+msgstr "讛讗讬诐 讛FPU 转讜诪讱 讘irq 讜拽转讜专讬"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Reading printer data..."
-msgstr "拽讜专讗 讗转 诪讬讚注 讛诪讚驻住转..."
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "讘讗讬讝讛 诪注专讻转 讛讚驻住讛 讘专爪讜谞讱 诇讛砖转诪砖?"
+msgid "Expand Tree"
+msgstr "驻专讜住 注抓"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Select Printer Spooler"
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Setting Default Printer..."
-msgstr "讛讙讚专转 诪讚驻住转 讘专讬专转 诪讞讚诇..."
+msgid "Expert Mode"
+msgstr "诪爪讘 诪讜诪讞讛"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing %s ..."
-msgstr "诪转拽讬谉 讗转 %s ..."
+msgid "Printer options"
+msgstr "讗驻砖专讜讬讜转 诪讚驻住转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Removing %s ..."
-msgstr "诪住讬专 讗转 %s ..."
+msgid "Local Network adress"
+msgstr "讻转讜讘转 专砖转 诪拽讜诪讬转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "Backup your System files. (/etc directory)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "诪转讞讬诇 讗转 诪注专讻转 讛讛驻注诇讛 讘讝诪谉 讗转讞讜诇"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
+"Do you want to install the updates ?"
msgstr ""
+"讘讗驻砖专讜转讱 注讻砖讬讜 诇讛讜专讬讚 讞讘讬诇讜转 注讚讻讜谉. 讞讘讬诇讜转 讗诇讛 注讜讚讻谞讜 诇讗讞专 砖讞专讜专 讛讛驻爪讛. 讛诐 "
+"讬讻讜诇讬诐\n"
+" 诇讛讻讬诇 注讚讻讜谞讬 讗讘讟讞讛 讞砖讜讘讬诐.\n"
+"\n"
+"诇讛讜专讚转 讞讘讬诇讜转 讗诇讛 注诇讬讱 诇讛讬讜转 注诐 讞讬讘讜专 讗讬谞讟专谞讟 注讜讘讚.\n"
+"\n"
+"讛讗诐 讘专爪讜谞讱 诇讛转拽讬谉 讗转 讛注讚讻讜谞讬诐 讛讗诇讛?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "high"
-msgstr "讙讘讜讛讛"
+msgid "Samba Server"
+msgstr "砖专转 samba"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Restarting printing system..."
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Configuration of a remote printer"
+msgid "Australian Optus cable TV"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr "<Tab>/<Alt-Tab> 讘讬谉 讗诇诪谞讟讬诐 | <Space> 讘讞讬专讛 | <F12> 诪住讱 讛讘讗"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure the network now"
-msgstr ""
+msgid "Zimbabwe"
+msgstr "讝讬诪讘讘讜讗讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Go on without configuring the network"
+msgid "Please enter the host name or IP."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+msgid "When"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network functionality not configured"
-msgstr "转驻拽讜讚 讛专砖转 诇讗 讛讜讙讚专"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Starting network..."
-msgstr "诪转讞讬诇 专砖转..."
+msgid "Second DNS Server (optional)"
+msgstr "砖专转 DNS 砖谞讬 (讗讜驻爪讬讛)"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Refreshing printer data..."
-msgstr "诪专注谞谉 诪讬讚注 注诇 讛诪讚驻住转..."
+msgid "Finland"
+msgstr "驻讬谞诇谞讚"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Transfer printer configuration"
-msgstr "讛讙讚专转 讛注讘专转 诪讚驻住转"
+msgid "Color depth: %s\n"
+msgstr "专诪转 爪讘注: %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Transferring %s..."
-msgstr "诪注讘讬专 讗转 %s..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "讗讬 讗驻砖专 诇讘讟诇 讗转 讘讞讬专转 讞讘讬诇讛 讝讜, 砖讬讚专讜讙讛 讞讜讘讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "New printer name"
-msgstr "砖诐 讛诪讚驻住转 讛讞讚砖讛"
+msgid "Loading from floppy"
+msgstr "讟讜注谉 诪讛讚讬住拽讟"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"讛诪讚驻住转 \"%s\" 讻讘专 拽讬讬诪转,\n"
-"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讚专讜住 讗转 讛讛讙讚专讜转 讛拽讜讚诪讜转?"
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "砖诐 讛诪讚驻住转 爪专讬讱 诇讛讻讬诇 专拽 讗讜转讬讜转, 诪住驻专讬诐 讜拽讜 转讞转讜谉"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Transfer"
-msgstr "讛注讘专讛"
+msgid "Slovenia"
+msgstr "住诇讜讘谞讬讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
msgstr ""
-"诪讚驻住转 讘砖诐 \"%s\" 讻讘专 拽讬讬诪转 转讞转 %s.\n"
-"讬砖 诇诇讞讜抓 \"讛注讘专讛\" 讻讚讬 诇讚专讜住 讗讜转讛.\n"
-"讘讗驻砖专讜转讱 讙诐 诇专砖讜诐 砖诐 讞讚砖 讗讜 诇讚诇讙 注诇 诪讚驻住转 讝讜."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "谞讗 诇讗 诇讛注讘讬专 讗转 讛诪讚驻住讜转"
+"讛讻谞住转 诪砖转诪砖\n"
+"%s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
msgstr ""
-"\n"
-"讬砖 诇住诪谉 讗转 讛诪讚驻住讜转 砖专讜爪讬诐 诇讛注讘讬专 讜诇诇讞讜抓 注诇\n"
-"\"讛注讘专讛\"."
+"- 讛转拽谞讬 PCI 讜USB: 讝讛 讘专砖讬诪转 讬爪专谉, 讛转拽谉, 讬爪专谉 诪砖谞讛 讜讛转拽谉 诪砖谞讛 砖诇 讝讬讛讜讬 PCI/"
+"USB."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
+msgid "ProgressBar color selection"
+msgstr "讘讞讬专转 爪讘注 驻住 讛讛转拽讚诪讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"讛谞讛 讛讻谞讬住讜转 诇转驻专讬讟 讛讛驻注诇讛 注讚 注讻砖讬讜.\n"
+"讘讗驻砖专讜转讱 诇讬爪讜专 讻谞讬住讜转 谞讜住驻讜转 讗讜 诇砖谞讜转 讗转 讛拽讬讬诪讜转."
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
msgstr ""
+"诪专讬抓 驻拽讜讚讜转 诇驻讬 讝诪谞讬诐 砖谞拽讘注讜 诇讛专爪转谉\n"
+"讜诪专讬抓 驻拽讜讚讜转 讗爪讜讛 讻讗砖专 讬砖 注讜诪住 诪注专讻转."
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "Radio support:"
+msgstr "转诪讬讻转 专讚讬讜:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Installing SANE packages..."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Printing test page(s)..."
-msgstr "诪讚驻讬住 讚驻讬 谞住讬讜谉..."
+msgid "boot disk creation"
+msgstr "讬爪讬专转 讚讬住拽讟 讛驻注诇转 诪注专讻转"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Print option list"
-msgstr "讛讚驻住转 专砖讬诪转 讗驻砖专讜讬讜转"
+msgid "LDAP"
+msgstr "LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "诪讚驻讬住 注诇 讛诪讚驻住转 \"%s\""
+msgid "SILO"
+msgstr "SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "讻谞讬住讛 诇讛讚驻住讛/讻专讟讬住-转诪讜谞讛 讘\"%s\""
+msgid "Change type"
+msgstr "砖讬谞讜讬 住讜讙"
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "诪讚驻讬住/住讜专拽 讘\"%s\""
+msgid "SILO Installation"
+msgstr "讛转拽谞转 SILO"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "诪讚驻讬住/住讜专拽/讻专讟讬住-转诪讜谞讛 讘\"%s\""
+msgid "Use CD/DVDROM to backup"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
#, c-format
msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
"\n"
-msgstr ""
-"讻讚讬 诇讚注转 注诇 讛讗驻砖专讜讬讜转 讛讟诪讜谞讜转 讘诪讚驻住转 砖诇讱 讬砖 诇拽专讜讗 讗转 讛专砖讬诪讛 砖讻讗谉 讗讜 诇诇讞讜抓 注诇 "
-"讻驻转讜专 \"专砖讬诪转 讗驻砖专讜讬讜转 讛讚驻住讛\".%s%s%s\n"
"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+msgid "paranoid"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
#: ../../printer/printerdrake.pm:1
@@ -9888,1333 +9871,1207 @@ msgid ""
"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"讻讚讬 诇讛讚驻讬住 拽讜讘抓 诪砖讜专转 讛驻拽讜讚讛 (讛诪注讟驻转) 讬砖 诇讛砖转诪砖 讘驻拽讜讚讛 \"%s <file>\" or \"%s "
-"<file>\".\n"
+msgid "Resolution"
+msgstr "专讝讜诇讜爪讬讛"
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
-"讻讚讬 诇讚注转 注诇 讛讗驻砖专讜讬讜转 讛讟诪讜谞讜转 讘诪讚驻住转 砖诇讱 讬砖 诇拽专讜讗 讗转 讛专砖讬诪讛 砖讻讗谉 讗讜 诇诇讞讜抓 注诇 "
-"讻驻转讜专 \"专砖讬诪转 讗驻砖专讜讬讜转 讛讚驻住讛\". "
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"讻讚讬 诇讛讚驻讬住 拽讜讘抓 诪砖讜专转 讛驻拽讜讚讛 (讛诪注讟驻转) 讬砖 诇讛砖转诪砖 讘驻拽讜讚讛 \"%s <file>\".\n"
+msgid "reconfigure"
+msgstr "讛讙讚专 诪讞讚砖"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
-"讛谞讛 专砖讬诪讛 砖诇 讗驻砖专讜讬讜转 讛拽讬讬诪讜转 讘诪讚驻住转 讛谞讜讻讞讬转:\n"
-"\n"
+"讛讻专讟讬住 砖诇讱 转讜诪讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 注诐 XFree %s,\n"
+"讝讛讬专讜转: 讝讜讛讬 讙讬专住讛 谞住讬讜谞讬转 讛注诇讜诇讛 诇转拽讜注 诇讱 讗转 讛诪讞砖讘."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "砖讬专讜转 Xinetd "
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "讻谞讬住讛 诇讻诇讬 专砖转"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
msgstr ""
+"讜讻诪讜讘谉, 讚讞讬驻转 讛诪讜诇讟讬诪讚讬讛 诇讙讘讜诇讜转 砖诇讛 注诐 讛诪讬诇讛 讛讗讞专讜谞讛 诇讛爪讙转 住专讟讬诐, 讛拽砖讘讛 "
+"诇诪讜讝讬拽讛 讜注专讬讻转 转诪讜谞讜转 讜爪讬诇讜诪讬诐."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Did it work properly?"
-msgstr "讛讗诐 讝讛 注讘讚 讻专讜讗讬?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
-"讚驻讬 讛谞住讬讜谉 谞砖诇讞讜 诇讛讚驻住讛.\n"
-"讬讻讜诇 诇讛讬讜转 砖讬讬拽讞 讻诪讛 讝诪谉 注讚 砖讛诪讚驻住转 转转讞讬诇 讘讛讚驻住讛.\n"
+"砖讙讬讗讛 讘讛转拽谞转 aboot,\n"
+"诇谞住讜转 诇讻驻讜转 讗转 讛讛转拽谞讛 讗驻讬诇讜 讗诐 讝讛 讛讜专住 讗转 讛诪讞讬爪讛 讛专讗砖讜谞讛?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
"\n"
-msgstr ""
-"讚驻讬 讛谞住讬讜谉 谞砖诇讞讜 诇讛讚驻住讛.\n"
-"讬讻讜诇 诇讛讬讜转 砖讬讬拽讞 讻诪讛 讝诪谉 注讚 砖讛诪讚驻住转 转转讞讬诇 讘讛讚驻住讛.\n"
-"诪爪讘 讛讛讚驻住讛:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+" \n"
+" If you check bzip2 compression, you will compress\n"
+" your data better than gzip (about 2-10 %%).\n"
+" This option is not checked by default because\n"
+" this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+" This option will update your backup, but this\n"
+" option is not really useful because you need to\n"
+" decompress your backup before you can update it.\n"
+" \n"
+" - the .backupignore mode:\n"
+"\n"
+" Like with cvs, Drakbackup will ignore all references\n"
+" included in .backupignore files in each directories.\n"
+" ex: \n"
+" #> cat .backupignore\n"
+" *.o\n"
+" *~\n"
+" ...\n"
+" \n"
"\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Do not print any test page"
-msgstr "讗讬谉 诇讛讚驻讬住 讗祝 讚祝 谞住讬讜谉"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Photo test page"
-msgstr "讚祝 谞住讬讜谉 砖诇 转诪讜谞讛"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Alternative test page (A4)"
-msgstr "讚祝 谞住讬讜谉 讗诇讟专谞讟讬讘讬 (A4)"
+msgid "Please fill or check the field below"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "讚祝 谞住讬讜谉 讗诇讟专谞讟讬讘讬 (诪讻转讘)"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "讛讗诐 讘专爪讜谞讱 诇砖诪讜专 讗转 砖讬谞讜讬讬 /etc/fstab?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Standard test page"
-msgstr "讚祝 谞住讬讜谉 专讙讬诇"
+msgid "Boot Protocol"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Print"
-msgstr "讛讚驻住讛"
+msgid "LVM-disks %s\n"
+msgstr "LVM-disks %s\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No test pages"
-msgstr "讗讬谉 讚驻讬 谞住讬讜谉"
+msgid "The package %s is needed. Install it?"
+msgstr "讛讞讘讬诇讛 %s 讚专讜砖讛. 讛讗诐 诇讛转拽讬谞讛?"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"谞讗 诇讘讞讜专 讗转 讚驻讬 讛谞住讬讜谉 砖讘专爪讜谞讱 诇讛讚驻讬住.\n"
-"讞砖讜讘: 注诇讜诇 诇拽讞转 讝诪谉 专讘 诇讚祝 讛谞住讬讜谉 砖诇 讛转诪讜谞讛 诇讛讬讜转 诪讜讚驻住 讜讘诪讚驻住讜转 诇讬讬讝专 注诐 "
-"讝讻专讜谉 谞诪讜讱 讝讛 注诇讜诇 讗驻讬诇讜 诇讗 诇讛讬讜转 诪讜讚驻住 讘讻诇诇. 讘专讜讘 讛诪拽专讬诐 讬砖 诪住驻讬拽 讝讻专讜谉 "
-"诇讛讚驻住转 讚祝 谞住讬讜谉 专讙讬诇."
+msgid "On boot"
+msgstr "讘讝诪谉 讗转讞讜诇"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Test pages"
-msgstr "讚驻讬 谞住讬讜谉"
+msgid "Bus identification"
+msgstr "讝讬讛讜讬 Bus"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"讛讗诐 讘专爪讜谞讱 砖\"%s\" 转讛讬讛 诪讚驻住转\n"
-"讘专讬专转 讛诪讞讚诇?"
+msgid "Please make a backup of your data first"
+msgstr "谞讗 诇讙讘讜转 讗转 讛诪讬讚注 砖诇讱 拽讜讚诐 诇讻谉"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Option %s out of range!"
-msgstr "讗驻砖专讜转 %s 讬爪讗讛 诪讛讙讘讜诇讜转!"
+msgid "Vatican"
+msgstr "讜转讬拽谉"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Option %s must be a number!"
-msgstr "讗驻砖专讜转 %s 讞讬讬讘转 诇讛讬讜转 诪住驻专!"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "讬砖 诇讱 讬讜转专 诪讻讜谞谉 拽砖讬讞 讗讞讚, 讘讗讬讝讛 讘专爪讜谞讱 诇讛转拽讬谉 诇讬谞讜拽住?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "讗驻砖专讜转 %s 讞讬讬讘转 诇讛讬讜转 诪住驻专 砖诇诐!"
+msgid "Boot ISO"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer default settings"
-msgstr "讛讙讚专讜转 讘专讬专转 诪讞讚诇 注讘讜专 讛诪讚驻住转"
+msgid "Eritrea"
+msgstr "讗专讬转专讬讗讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "Remove List"
msgstr ""
-"讛讙讚专讜转 讘专讬专转 讛诪讞讚诇 砖诇 讛诪讚驻住转\n"
-"\n"
-"注诇讬讱 诇讘讚讜拽 砖讘讗诪转 讙讜讚诇 讛讚祝 讜住讜讙 讛讚讬讜/诪爪讘 讛讛讚驻住讛 (讗诐 讗驻砖专) 讜讙诐 讻诇 讛讛讙讚专讜转 "
-"诪讜讙讚专讬诐 谞讻讜谉. 讬砖 诇砖讬诐 诇讘 砖注诐 讛讚驻住讛 讘讗讬讻讜转/专讝讜诇讜爪讬讛 讙讘讜讛讛 讛诪讚驻住转 注诇讜诇讛 诇讛讬讜转 "
-"诪讜讝谞转 讘讗讬讟讬讜转."
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "A customizable environment"
+msgstr "住讘讬讘讛 讗砖专 谞讬转谞转 诇讛转讗诪讛 讗讬砖讬转"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Inuktitut"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "讛讙讚专转 Lexmark inkjet"
+msgid "Morocco"
+msgstr "诪专讜拽讜"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
+msgid "Which printer model do you have?"
+msgstr "讗讬讝讛 诪讜讚诇 诪讚驻住转 讬砖 诇讱?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
+msgid "Add a new printer"
+msgstr "讛讜住驻转 诪讚驻住转 讞讚砖讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "OKI winprinter configuration"
-msgstr "讛讙讚专转 OKI winprinter"
+msgid " All of your selected data have been "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "<-- Delete"
msgstr ""
-"讗诐 讛诪讚驻住转 砖诇讱 诇讗 讘专砖讬诪讛, 讬砖 诇讘讞讜专 诪讚驻住转 转讜讗诪转 (专砖讜诐 讘诪讚专讬讱 砖诇 讛诪讚驻住转) 讗讜 "
-"讚讜诪讛."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Nepal"
+msgstr "谞驻讗诇"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Which printer model do you have?"
-msgstr "讗讬讝讛 诪讜讚诇 诪讚驻住转 讬砖 诇讱?"
+msgid "cpu # "
+msgstr "诪注讘讚 # "
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer model selection"
-msgstr "讘讞讬专转 诪讜讚诇 诪讚驻住转"
+msgid "chunk size"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Reading printer database..."
-msgstr "拽讜专讗 讗转 诪讗讙专 讛谞转讜谞讬诐 砖诇 讛诪讚驻住转..."
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "驻拽讜讚讜转 诇驻谞讬 讻谞讬住讛 诇诪注专讻转, 讗讜 'c' 讘砖讘讬诇 砖讜专转 驻拽讜讚讛."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Select model manually"
-msgstr "讘讞讬专转 注爪诪讗讬转 讘诪讜讚诇"
+msgid "Problems installing package %s"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "The model is correct"
-msgstr "讛诪讜讚诇 谞讻讜谉"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "转拽讘诇/讬 讛转专讗讛 讗诐 讛讟注讬谞讛 讙讘讜讛讛 诪讛注专讱 讛讝讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
"\n"
-"For your printer Printerdrake has found:\n"
"\n"
-"%s"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer model"
-msgstr "讛诪讜讚诇 砖诇 讛诪讚驻住转 砖诇讱"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Preparing printer database..."
-msgstr "诪讻讬谉 讗转 诪讗讙专 讛谞转讜谞讬诐 砖诇 讛诪讚驻住转..."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Location"
-msgstr "诪讬拽讜诐"
+msgid "Add a scanner manually"
+msgstr "讛讜住驻讛 注爪诪讗讬转 砖诇 住讜专拽"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Description"
-msgstr "转讬讗讜专"
+msgid "Reload partition table"
+msgstr "讟注谉 诪讞讚砖 讗转 砖讜诇讞谉 讛诪讞讬爪讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Name of printer"
-msgstr "砖诐 讛诪讚驻住转"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "讻谉, 讘专爪讜谞讬 讻谞讬住讛 讗讜讟讜诪讟讬转 注诐 讝讛 (诪砖转诪砖, 砖讜诇讞谉 注讘讜讚讛)"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "Search for fonts in installed list"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "谞讗 诇讛讻谞讬住 砖诐 诇诪讚驻住转 讜讛注专讛"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "讛讜驻讱 讗转 讛驻讜专讟 诇诪讚驻住转 诇讝诪讬谉 讘砖讘讬诇 CUPS..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "讘讜讚拽 讛转拽谉 讜诪讙讚讬专 HPOJ..."
+msgid "Boot"
+msgstr "讗转讞讜诇"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
+msgid "Tuner type:"
+msgstr "住讜讙 诪讻讜讜谉:"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Installing mtools packages..."
-msgstr ""
+msgid "\"Menu\" key"
+msgstr "诪拽砖 \"转驻专讬讟\""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Installing SANE packages..."
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Installing HPOJ package..."
-msgstr "诪转拽讬谉 讞讘讬诇转 HPOJ..."
+msgid "Security Administrator:"
+msgstr "诪谞讛诇 讗讘讟讞讛:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+msgid "Please enter your login"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A command line must be entered!"
-msgstr "砖讜专转 驻拽讜讚讛 讞讬讬讘转 诇讛讬讜转 诪讜讻谞住转!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Command line"
-msgstr "砖讜专转 驻拽讜讚讛"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Pipe into command"
+msgid "Fonts copy"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Detected model: %s %s"
-msgstr "讝讜讛讛 诪讜讚诇: %s %s"
+msgid "Automated"
+msgstr "讗讜讟讜诪转讬"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讘讚讜拽 讗转 讛讛讙讚专讜转?"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer Device URI"
-msgstr ""
+msgid ""
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "讛诪讚驻住转 \"%s\" 讛讜住专讛 讘讛爪诇讞讛 诪Office/OpenOffice.org/GIMP."
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
#, c-format
msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+" to the Internet as a client.\n"
+"\n"
+"High: There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher: The security is now high enough to use the system as a server "
+"which can accept\n"
+" connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+" should choose a lower level.\n"
+"\n"
+"Paranoid: This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+" features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+" If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+" email)"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Port"
-msgstr ""
+msgid "Save packages selection"
+msgstr "砖诪讬专转 讘讞讬专转 讛讞讘讬诇讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Printer host name or IP"
+msgid "Remove the last item"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The port number should be an integer!"
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Printer host name or IP missing!"
+msgid "No net boot images created!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
+msgid "use pptp"
+msgstr "砖讬诪讜砖 讘 pptp"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
+msgid "Choose which services should be automatically started at boot time"
+msgstr "讬砖 诇讘讞讜专 讗讬诇讜 砖讬专讜转讬诐 讬注诇讜 讗讜讟讜诪讟讬转 讘讝诪谉 讗转讞讜诇 讛诪讞砖讘"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "TCP/Socket Printer Options"
+msgid "Learn how to use this printer"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "Configure the network now"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "讬砖 诇讘讞讜专 讗转 讛诪专讗讛 砖讘专爪讜谞讱 诇讛砖讬讙 诪诪谞讛 讗转 讛讞讘讬诇讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Scanning network..."
+msgid ""
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"诪砖谞讛 讙讜讚诇 讛FAT 讗讬谞讜 诪住讜讙诇 诇讛转诪讜讚讚 注诐 讛诪讞讬爪讛 砖诇讱,\n"
+" 讛砖讙讬讗讛 讛讘讗讛 讛转专讞砖讛: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Printer auto-detection"
-msgstr ""
+msgid "Which sector do you want to move it to?"
+msgstr "诇讗讬讝讛 住拽讟讜专 讘专爪讜谞讱 诇讛注讘讬专 讗转 讝讛?"
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
+msgid "Do you want to click on this button?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇诇讞讜抓 注诇 讻驻转讜专 讝讛?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "NCP server name missing!"
-msgstr ""
+msgid "Bahamas"
+msgstr "讗讬讬 讘讛讗诪讛"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Print Queue Name"
+msgid "Manual configuration"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Printer Server"
-msgstr ""
+msgid "search"
+msgstr "讞讬驻讜砖"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "NetWare Printer Options"
-msgstr ""
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (讛转拽谞转 诪谞讛诇 讛转拽谉 诇转爪讜讙讛)"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+msgid "Zeroconf host name must not contain a ."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+msgid "Unknown/Others"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "SECURITY WARNING!"
-msgstr "讗讝讛专转 讘讬讟讞讜谉!"
+msgid "No TV Card detected!"
+msgstr "诇讗 讝讜讛讛 讻专讟讬住 讟诇讜讜讬讝讬讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Samba share name missing!"
-msgstr "砖诐 砖讬转讜祝 Samba 讞住专!"
+msgid "Options"
+msgstr "讗驻砖专讬讜转"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "讛诪讚驻住转 \"%s\" 诪讜讙讚专转 讻注转 讻诪讚驻住转 讘专讬专转 诪讞讚诇."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Auto-detected"
-msgstr "讝讜讛讛-讗讜讟讜诪讟讬转"
+msgid ""
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "拽讘讜爪讛"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "讚讜专 讛诪注讘讚: (诇讚讜讙诪讗: 8 诇驻谞讟讬讜诐 3,...)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Share name"
-msgstr "砖诐 讛砖讬转讜祝"
+msgid "Auto-detected"
+msgstr "讝讜讛讛-讗讜讟讜诪讟讬转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "SMB server IP"
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "诪讗专讞 砖专转 SMB"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-"讗诐 讛诪讚驻住转 讛专爪讜讬讛 讝讜讛转讛 讗讜讟诪讟讬转, 讬砖 诇讘讞讜专 讗讜转讛 诪讛专砖讬诪讛 讜讗讝 诇讛讜住讬祝 砖诐 诪砖转诪砖, "
-"住讬住诪讛, 讜/讗讜 拽讘讜爪讛 讗诐 爪专讬讱."
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "讗驻砖专讜讬讜转 诪讚驻住转 SMB (讞诇讜谞讜转 9x/nt)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "诪讚驻住转 \"%s\" 注诇 砖专转 \"%s\""
+msgid "Refuse"
+msgstr "住专讘"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", 诪讚驻住转 \"%s\" 注诇 砖专转 \"%s\" "
+msgid "HFS"
+msgstr "HFS"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
-msgid "Remote printer name missing!"
-msgstr "砖诐 诪讚驻住转 诪专讜讞拽转 讞住专!"
+msgid ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
+msgstr "讞讜诪专讚专讬讬拽 诪专讬爪讛 讞讬驻讜砖 讞讜诪专讛, 讜诪讗驻砖专转 诇讛讙讚讬专 讞讜诪专讛 讞讚砖讛/砖讛砖转谞转讛."
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
-msgid "Remote host name missing!"
-msgstr "砖诐 诪讗专讞 诪专讜讞拽 讞住专!"
+msgid "Remote Printers"
+msgstr "诪讚驻住讜转 专讞讜拽讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
#, c-format
-msgid "Remote printer name"
-msgstr "砖诐 诪讚驻住转 诪专讜讞拽转"
+msgid "Creating and formatting file %s"
+msgstr "讬讜爪专 讜诪驻专诪讟 讗转 讛拽讜讘抓 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remote host name"
-msgstr "砖诐 砖专转 诪专讜讞拽"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-"讻讚讬 诇讛砖转诪砖 讘诪讚驻住转 lpd 诪专讜讞拽转, 注诇讬讱 诇住驻拽 讗转 砖诐 讛诪讗专讞 砖诇 砖专转 讛讛讚驻住讛 讜砖诐 讛诪讚驻住转 "
-"注诇 讛砖专转."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "讗驻砖专讜讬讜转 诪讚驻住转 lpd 诪专讜讞拽转"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Manual configuration"
+msgid "Choose an existing LVM to add to"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "You must choose/enter a printer/device!"
+msgid "xfs restart"
msgstr ""
#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
msgstr ""
+"讛诪讚驻住转 \"%s\" 讻讘专 拽讬讬诪转,\n"
+"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讚专讜住 讗转 讛讛讙讚专讜转 讛拽讜讚诪讜转?"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr ""
+msgid "No partition available"
+msgstr "讗讬谉 诪讞讬爪讜转 讝诪讬谞讜转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
+msgid "Use the scanners on hosts: "
+msgstr "砖讬诪讜砖 讘住讜专拽讬诐 讗诇讛 转讞转 讛诪讗专讞讬诐:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose the printer to which the print jobs should go."
+msgid "Unselected All"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "Domain Name Resolver"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Encryption key (again)"
+msgstr "诪驻转讞 讛爪驻谞讛 (讘砖谞讬转)"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "Samba share name missing!"
+msgstr "砖诐 砖讬转讜祝 Samba 讞住专!"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+msgid "True Type install done"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "The following printer was auto-detected. "
-msgstr ""
+msgid "Detection in progress"
+msgstr "讝讬讛讜讬 讘转讛诇讬讱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+msgid "Build Whole Kernel -->"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
+msgid "Welcome to %s"
+msgstr "讘专讜讻讬诐 讛讘讗讬诐 诇- %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 注讚讻讜谉 诪讜讚讜诇讬诐 诇讻讜谞谉 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
+msgid "Bootsplash"
+msgstr "讟注讬谞转 住驻诇讗砖"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Available printers"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
msgstr ""
+"讛诪讚驻住转 讛讘讗讛\n"
+"\n"
+"%s%s\n"
+"诪讞讜讘专转 讬砖讬专讜转 诇诪注专讻转 砖诇讱"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "No printer found!"
-msgstr ""
+msgid "Printer sharing on hosts/networks: "
+msgstr "砖讬转讜祝 诪讚驻住讜转 注诇 诪讗专讞讬诐/专砖转讜转:"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "You must enter a device or file name!"
+msgid ""
+"\n"
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Local Printer"
+msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USB printer \\#%s"
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr ""
+msgid "Cuba"
+msgstr "拽讜讘讛"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
+msgid "Searching for new printers..."
+msgstr "诪讞驻砖 诪讚驻住讜转 讞讚砖讜转..."
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr ""
+msgid "Belize"
+msgstr "讘诇讬讝"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Detected %s"
+msgid " (multi-session)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
+msgid "Kernel Boot Timeout"
+msgstr "驻讙 讝诪谉 讗转讞讜诇 讙专注讬谉"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"讻专讟讬住讱 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 转诇转 诪讬诪讚 专拽 注诐 XFree %s.\n"
+"讻专讟讬住讱 谞转诪讱 注诇 讬讚讬 XFree %s 讗砖专 讬讻讜诇 诇转诪讜讱 讘讛讗爪转 讞讜诪专转 讚讜 诪讬诪讚讬转 讟讜讘讛 讬讜转专."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "讗砖祝 讛诪讬讞讜抓 砖诇 DrakX 诪爪讗 讗转 讛驻转专讜谞讜转 讛讘讗讬诐:"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
+msgid "Hungarian"
+msgstr "讛讜谞讙专讬转"
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid ""
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
msgstr ""
+"讬砖 诇讘讞讜专 讗转 住驻拽 讛讞讜诪专讛 砖诇讱.\n"
+"讗诐 讝讛 诇讗 讘专砖讬诪讛 讬砖 诇讘讞讜专 \"诇讗 讘专砖讬诪讛\"."
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr ""
+msgid "Automatic time synchronization (using NTP)"
+msgstr "住讬谞讻专讜谉 讝爪诐 讗讜讟讜诪讟讬 (讘砖讬诪讜砖 NTP)"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+msgid "LDAP Server"
+msgstr "砖专转 LDAP"
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
+msgid "Choose your country"
+msgstr "讘讞讬专转 讗专抓"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid ")"
+"- System Files:\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid " on "
+msgid "Standalone Tools"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "("
+msgid "Where"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuring printer ..."
-msgstr "讛讙讚专转 诪讚驻住转 ..."
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Searching for new printers..."
-msgstr "诪讞驻砖 诪讚驻住讜转 讞讚砖讜转..."
+msgid "but not matching"
+msgstr "讗讘诇 诇讗 讛砖讜讜讗讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
+"讻讗谉 讘讗驻砖专讜转讱 诇讘讞讜专 诪谞讛诇 讛转拽谉 讗诇讟专谞讟讬讘讬 (讙诐 OSS 讗讜 ALSA) 诇讻专讟讬住 讛拽讜诇 砖诇讱 (%s)."
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "讘讗诪转 讘专爪讜谞讱 诇讛讙讚讬专 讛讚驻住讛 讘诪讞砖讘 讝讜?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讗驻砖专 讛讚驻住讛 讘诪讚驻住转 讛诪讜讝讻专转 讻讗谉?\n"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讗驻砖专 讛讚驻住讛 讘诪讚驻住讜转 讛专砖转 讛驻谞讬诪讬转?\n"
+msgid "Configuring PCMCIA cards..."
+msgstr "诪讙讚讬专 讻专讟讬住讬 PCMCIA..."
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讗驻砖专 讛讚驻住讛 讘诪讚驻住讜转 讛专砖转 讛驻谞讬诪讬转 讗讜 讘诪讚驻住讜转 讛诪讜讝讻专讜转 讻讗谉?\n"
+msgid "kdesu missing"
+msgstr "讞住专 kdesu"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "(讬砖 诇讜讜讚讗 砖讻诇 讛诪讚驻住讜转 诪讞讜讘专讜转 讜讚讜诇拽讜转).\n"
+msgid "Encryption key"
+msgstr "诪驻转讞 讛爪驻谞讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "诇讗 谞诪爪讗讛 诪讚驻住转 讛诪讞讜讘专转 讬砖讬专讜转 诇诪讞砖讘讱"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"讬砖 %d 诪讚驻住讜转 诇讗 讬讚讜注讜转 讛诪讞讜讘专讜转 诇诪注专讻转 砖诇讱"
+msgid "Christmas Island"
+msgstr "讗讬讬 讞址讙 讛址诪旨讜止诇指讚"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"讬砖 诪讚驻住转 讗讞转 诇讗 讬讚讜注讛 讛诪讞讜讘专转 诇诪注专讻转 砖诇讱"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "讛转拽谞转 诪讗转讞诇 讛诪注专讻转 谞讻砖诇讛. 讛砖讙讬讗讜转 讛讘讗讜转 讛转专讞砖讜:"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"讛诪讚驻住转 讛讘讗讛\n"
-"\n"
-"%s%s\n"
-"诪讞讜讘专转 讬砖讬专讜转 诇诪注专讻转 砖诇讱"
+msgid "EIDE/SCSI channel"
+msgstr "注专讜抓 EIDE/SCSI"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"讛诪讚驻住转 讛讘讗讛\n"
-"\n"
-"%s%s\n"
-"诪讞讜讘专(讜)转 讬砖讬专讜转 诇诪注专讻转 砖诇讱"
+msgid "Set this printer as the default"
+msgstr "讛讙讚专转 讛诪讚驻住转 讻讘专讬专转 诪讞讚诇"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"讛诪讚驻住转 讛讘讗讛\n"
-"\n"
-"%s%s\n"
-"诪讞讜讘专讜转 讬砖讬专讜转 诇诪注专讻转 砖诇讱"
+msgid "partition %s"
+msgstr "诪讞讬爪转 %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
#, c-format
-msgid "and %d unknown printers"
+msgid "Paranoid"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "and one unknown printer"
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Checking your system..."
+msgid "<-- Del User"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Restarting CUPS..."
-msgstr ""
+msgid "Location on the bus"
+msgstr "诪讬拽讜诐 注诇 讛bus"
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "No printer found!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
+msgid "the vendor name of the device"
+msgstr "砖诐 讛讬爪专谉 砖诇 讛讛转拽谉"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "讻转讜讘转 讛IP 讗讬谞讛 转拽讬谞讛.\n"
+msgid "Erase entire disk"
+msgstr "诪讞讬拽转 讻诇 讛讚讬住拽"
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Server IP missing!"
-msgstr "讞住专讛 讻转讜讘转 讛IP 砖诇 讛砖专转!"
+msgid " (Default)"
+msgstr "(讘专讬专转 诪讞讚诇)"
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid ""
+"Arguments: ()\n"
+"\n"
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Automatic reconfiguration"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "讙讬砖讛 诇诪讚驻住转 注诇 砖专转 cups 诪专讜讞拽"
+msgid "Receiving Speed:"
+msgstr "诪讛讬专讜转 拽讘诇讛:"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Remove selected server"
-msgstr "讛住专转 讛砖专转 讛谞讘讞专"
+msgid "Turks and Caicos Islands"
+msgstr "讗讬讬 拽讬讬拽讜住"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Edit selected server"
-msgstr "注专讬讻转 讛砖专转 讛谞讘讞专"
+msgid "permissions"
+msgstr "讛专砖讗讜转"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add server"
-msgstr "讛讜住驻转 砖专转"
+msgid "<- Previous"
+msgstr "拽讜讚诐 ->"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Internet Connection Sharing configuration"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "IP address of host/network:"
+msgid "Toggle between flat and group sorted"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "Themes"
+msgstr "注专讻讜转 谞讜砖讗"
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Options: %s"
+msgstr "讗驻砖专讜讬讜转: %s"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Host/network IP address missing."
+msgid ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
msgstr ""
+"讛砖讬诪讜砖 讛讜讗 讻专讙注 讘%s 讻诪谞讛诇 讟注讬谞讛.\n"
+"讬砖 诇诇讞讜抓 注诇 讛讙讚专讜转 讻讚讬 诇讛专讬抓 讗转 讗砖祝 讛讛讙讚专讛."
#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
+msgid "OKI winprinter configuration"
+msgstr "讛讙讚专转 OKI winprinter"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sharing of local printers"
-msgstr ""
+msgid "Saint Helena"
+msgstr "住谞讟 讛诇谞讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remove selected host/network"
-msgstr ""
+msgid "Security Level"
+msgstr "专诪转 讛讗讘讟讞讛:"
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host/network"
+msgid ""
+"Some steps are not completed.\n"
+"\n"
+"Do you really want to quit now?"
msgstr ""
+"讞诇拽 诪讛砖诇讘讬诐 诇讗 讛讜砖诇诪讜.\n"
+"\n"
+"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇爪讗转 注讻砖讬讜?"
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Sudan"
+msgstr "住讜讚谉"
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
+msgid "Polish (qwertz layout)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Syria"
+msgstr "住讜专讬谞讗诐"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
#, c-format
msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
+"Welcome to %s the operating system chooser!\n"
"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+msgstr ""
+"讘专讜讻讬诐 讛讘讗讬诐 诇%s 讗转 讘讜讞专 讛诪注专讻转!\n"
"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"讬砖 诇讘讞讜专 诪注专讻转 讛驻注诇 诪讛专砖讬诪讛 讗讜\n"
+"诇讞讻讜转 %d 砖谞讬讜转 诇讛驻注诇转 讘专讬专转 诪讞讚诇.\n"
"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Portuguese"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Loopback file name: "
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "诪爪讘 讛讚驻住转 讟拽住讟 讬驻谞讬"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "DNS server address should be in format 1.2.3.4"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "None"
-msgstr "讻诇讜诐"
+msgid "Serbia"
+msgstr "住专讘讬讛"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Additional CUPS servers: "
-msgstr "砖专转讬 CUPS 谞讜住驻讬诐: "
+msgid "Newzealand"
+msgstr "谞讬讜讝讬诇谞讚"
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "No remote machines"
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "转讬拽讬讬讛 讝讜 爪专讬讻讛 诇讛讬砖讗专 注诐 诪注专讻转 讛拽讘爪讬诐 讛专讗砖讬转 (root)."
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Custom configuration"
-msgstr "讛讙讚专讜转 诪讜转讗诪讜转 讗讬砖讬转"
+msgid "CapsLock key"
+msgstr "诪拽砖 CapsLock"
-#: ../../printer/printerdrake.pm:1
+#: ../../steps.pm:1
#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "砖讬转讜祝 诪讚驻住讜转 注诇 诪讗专讞讬诐/专砖转讜转:"
+msgid "Install bootloader"
+msgstr "讛转拽谞转 讟讜注谉 讛诪注专讻转"
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "讘讞专 讗转 讻诪讜转 讛讝讬讻专讜谉 砖诇 讻专讟讬住 讛诪住讱 砖诇讱"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "The printers on this machine are available to other computers"
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : 讛爪讙 诪诪砖拽 讝讛 讻讘专讬专转 诪讞讚诇\n"
+"--connect : 讛转讞讘专 诇讗讬谞讟专谞讟 讗诐 诇讗 诪讞讜讘专 讻讘专--disconnect : 讛转谞转拽 诪讛讗讬谞讟专谞讟 讗诐 "
+"诪讞讜讘专 讻讘专\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : 讛讞讝专 1 讗诐 诪讞讜讘专, 0 讗讞专转--quiet : 诇驻注讜诇 讘爪讜专讛 讘诇转讬 讗讬谞讟专拽讟讬讘讬转"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+msgid "LVM name?"
+msgstr "砖诐 LVM?"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/service_harddrake:1
#, c-format
-msgid "CUPS printer configuration"
-msgstr "讛讙讚专转 诪讚驻住转 CUPS"
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "诪住驻专 讛转拽谞讬 讘专诪转 讛讞讜诪专讛 \"%s\" 讛讜住专讜:\n"
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "诪爪讗 %s %s 诪诪砖拽讬诐"
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+msgid "sticky-bit"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "How is the printer connected?"
+msgid "Post Install"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Select Printer Connection"
+msgid "The internal domain name"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Card IRQ"
msgstr ""
#: ../../security/help.pm:1
@@ -11225,330 +11082,265 @@ msgid ""
"Set the user umask."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "logdrake"
+msgstr "诇讜讙讚专讬讬拽"
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--strong : strong verification of font.\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
+"Font Importation and monitoring "
+"application \n"
+"--windows_import : 讬讘讜讗 讻诇 诪讞讬爪讜转 讞诇讜谞讜转 讛讝诪讬谞讜转\n"
+"--xls_fonts : xls 讛爪讙转 讻诇 讛驻讜谞讟讬诐 砖讻讘专 拽讬讬诪讬诐 讘\n"
+"--strong : 讗讬诪讜转 讞讝拽 砖诇 驻讜谞讟.\n"
+"--install : 拽讘诇转 讻诇 拽讜讘抓 驻讜谞讟 讗讜 转讬拽讬讬讛.\n"
+"--uninstall : 讛住专转 讻诇 驻讜谞讟 讗讜 讻诇 转讬拽讬讬讛 砖诇 讛驻讜谞讟.\n"
+"--replace : 讛讞诇驻转 讻诇 驻讜谞讟 讗诐 拽讬讬诐 讻讘专\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "讬砖 诇讘讞讜专 讘讻讜谞谉 讚讬住拽讟讬诐 砖讘讜 讘专爪讜谞讱 诇讬爪讜专 讗转 讚讬住拽讟 讛讗转讞讜诇"
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO 注诐 转驻专讬讟 讟拽住讟"
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "讛讻诇 (诇诇讗 讞讜诪转 讗砖)"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "讗转讛 讞讬讬讘 诇爪讬讬谉 转诪讜谞转 讙专注讬谉"
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Do"
+msgstr "注砖讛"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "诪转拽砖专 注诐 讛诪专讗讛 讻讚讬 诇拽讘诇 讗转 讛专砖讬诪讛 砖诇 讞讘讬诇讜转 讝诪讬谞讜转..."
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Lithuanian AZERTY (old)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "Brazilian (ABNT-2)"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "if set to yes, report check result to syslog."
+msgid "IP address of host/network:"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "讗诐 诪讜讙讚 诇讻谉, 诪专讬抓 讘讚讬拽讜转 讗讘讟讞讛 诪转讜讝诪谞讜转."
-
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "System installation"
+msgstr "讛转拽谞转 讛诪注专讻转"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "住谞讟 讜讬谞住谞讟 讜讛讙专谞讬讚讬诐"
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/拽讜讘抓/_驻转讬讞讛"
#: ../../security/help.pm:1
#, c-format
msgid ""
-"Arguments: (umask)\n"
+"Arguments: (arg)\n"
"\n"
-"Set the root umask."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Location of auto_install.cfg file"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "Open Firmware Delay"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
-msgstr ""
+msgid "Hungary"
+msgstr "讛讜谞讙专讬讛"
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid "Total progess"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Color configuration"
+msgstr "讛讙讚专讜转 爪讘注"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "New Zealand"
+msgstr "谞讬讜-讝讬诇谞讚"
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "please choose the date to restore"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "诪讞诇讬祝 诪ext2 诇ext3"
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg, alert=1)\n"
"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"Enable/Disable name resolution spoofing protection. If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+msgid "and %d unknown printers"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
msgstr ""
+"诇讞诇拽 诪诪注讘讚讬 讛驻谞讟讬讜诐 讛专讗砖讜谞讬诐 讛讬讗 讘讗讙 讘讞砖讜讘讬诐 砖诇 谞拽讜讚讛 爪驻讛 讛诪注讘讚讬诐 诇讗 讞讬砖讘讜 "
+"讘爪讜专讛 谞讞讜谞讛 讞诇拽 诪讛讞讬砖讘讬诐 砖转诇讜注讬诐 讘谞拽讜讚讛 爪驻讛 Floating point DIVision (FDIV)"
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "诇讗 谞诪爪讗 讻专讟讬住 ISDN 诪住讜讙 PCI. 谞讗 诇讘讞讜专 讗讞讚 讘诪住讱 讛讘讗."
-#: ../../security/help.pm:1
+#: ../../common.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "GB"
+msgstr "GB"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
-msgstr ""
+msgid "Please give a user name"
+msgstr "讗谞讗 转谉 砖诐 诪砖转诪砖"
-#: ../../security/help.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "诇讗驻砖专 讗转讞讜诇 注诐 讚讬住拽(cd)?"
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
+msgid "on Hard Drive"
msgstr ""
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "Winmodem connection"
+msgstr "讞讬讘讜专 诪讜讚诐-讞诇讜谞讜转 (Winmodem)"
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
"\n"
-"Allow/Forbid reboot by the console user."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
msgstr ""
#: ../../security/help.pm:1
@@ -11556,5029 +11348,5338 @@ msgstr ""
msgid ""
"Arguments: (arg)\n"
"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+"Set the password history length to prevent password reuse."
msgstr ""
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "注讻砖讬讜, 讗驻砖专 诇讛专讬抓 xawtv (转讞转 讞诇讜谉 讙专驻讬!) !\n"
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "讗讬谉 诪住驻讬拽 讝讬讻专讜谉 讜讬专讟讜讗诇讬 诇讛讟注讬谉 讗转 讛讛转拽谞讛, 谞讗 诇讛讜住讬祝 拽爪转"
-#: ../../security/help.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
+msgid "%s on %s"
+msgstr "%s 注诇 %s"
-#: ../../security/help.pm:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Arguments: (arg)\n"
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
"\n"
-"Accept/Refuse bogus IPv4 error messages."
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
+msgid "Which is your timezone?"
+msgstr "讗讬讝讛 讛讜讗 讗讬讝讜专 讛讝诪谉 砖诇讱?"
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
+msgid "Guinea"
+msgstr "讙讬谞讗讛"
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Use libsafe for servers"
+msgid "The system is now connected to the Internet."
msgstr ""
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Security level"
-msgstr "专诪转 讛讗讘讟讞讛"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Please choose the desired security level"
-msgstr "谞讗 诇讘讞讜专 讗转 专诪转 讛讗讘讟讞讛 讛专爪讜讬讛"
+msgid "Japan (broadcast)"
+msgstr ""
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
#, c-format
-msgid "DrakSec Basic Options"
-msgstr ""
+msgid "Mozambique"
+msgstr "诪讜讝诪讘讬拽"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"讝讛 讚讜诪讛 诇砖诇讘 讛拽讜讚诐, 讗讱 讛诪注专讻转 住讙讜专讛 诇讙诪专讬 讜讗驻砖专讜讬讜转 讛讗讘讟讞讛 讘诪爪讘 诪拽住讬诪诇讬."
+msgid "Icon"
+msgstr "住诪诇"
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+msgid "Please choose what you want to backup"
msgstr ""
-"注诐 专诪转 讗讘讟讞讛 讝讜, 砖讬诪讜砖 讘诪注专讻转 讻砖专转 讗驻砖专讬转.\n"
-"讛讗讘讟讞讛 讙讘讜讛讛 诪住驻讬拽 诇砖讬诪讜专 讛诪注专讻转 讻砖专转 砖讬讻讜诇 诇拽讘诇\n"
-"讞讬讘讜专讬诐 诪诇拽讜讞讜转 专讘讬诐. 讗诐 讛诪注专讻转 砖诇讱 讛讬讗 诇拽讜讞 讗讬谞讟专谞讟 讘诇讘讚, 讻讚讗讬 诇讘讞讜专 讘诪讛 "
-"谞诪讜讻讛 讬讜转专."
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "256 colors (8 bits)"
+msgstr "256 爪讘注讬诐 (8 讘讬讟)"
-#: ../../security/level.pm:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
+msgid "Read-write"
+msgstr "拽专讬讗讛-讻转讬讘讛"
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
+msgid "Size: %s\n"
+msgstr "讙讜讚诇: %s\n"
-#: ../../security/level.pm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Hostname: "
msgstr ""
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Paranoid"
+msgid "Chunk size %s\n"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
-msgid "Higher"
-msgstr ""
+msgid "Build the future of Linux!"
+msgstr "讘谞讬讬转 讛注转讬讚 砖诇 诇讬谞讜拽住!"
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "High"
+msgid "Local Printer"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Poor"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
msgstr ""
-#: ../../security/level.pm:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Welcome To Crackers"
-msgstr ""
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
+msgid "ADSL connection"
+msgstr "讞讬讘讜专 ADSL"
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Error!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+msgid "cable connection detected"
+msgstr "讞讬讘讜专 讻讘诇讬诐 讝讜讛讛"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_讚讬讜讜讞 讘讗讙"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No floppy drive available!"
-msgstr "讗讬谉 讻讜谞谉 讚讬住拽讟讬诐 讝诪讬谉!"
+msgid "Resize"
+msgstr "砖谞讛 讙讜讚诇"
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
#, c-format
-msgid "Floppy can be removed now"
-msgstr "讗驻砖专 诇讛住讬专 讗转 讛讚讬住拽讟 注讻砖讬讜"
+msgid "Dominica"
+msgstr "讚讜诪讬谞讬拽讛"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Couldn't access the floppy!"
-msgstr "诇讗 讛讬讛 讗驻砖专 诇讛讻谞住 诇讚讬住拽讟!"
+msgid "Please enter the device name to use for backup"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Please insert floppy disk:"
-msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟:"
+msgid "Resolution: %s\n"
+msgstr "专讝讜诇讜爪讬讛: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Write Config"
-msgstr ""
+msgid "matching"
+msgstr "讛砖讜讜讗讛"
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
#, c-format
-msgid "Dynamic IP Address Pool:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
+"谞讗 诇讘讞讜专 讗转 讛驻讜专讟 讛谞讻讜谉. 诇讚讜讙诪讗, 驻讜专讟 \"COM1\" 转讞转 讞诇讜谞讜转 谞拽专讗 \"ttyS0\"\n"
+"转讞转 讙谞讜/诇讬谞讜拽住."
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "dhcpd Server Configuration"
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "注讜诪讚 诇讛住讬专 讗转 讛讞讘讬诇讜转 讛讘讗讜转"
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "讞讬讘讜专 诇讗讬谞讟专谞讟"
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "IP Range Start:"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "砖讬诪讜砖 讘诪讞讬爪讛 拽讬讬诪转"
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Name Servers:"
+msgid "Canadian (Quebec)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Domain Name:"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "讛转拽谉 注讻讘专: %s\n"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Broadcast Address:"
+msgid "Reselect correct fonts"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Subnet Mask:"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Routers:"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
+"诇讘住讜祝, 转讬砖讗诇/讬 讗诐 讘专爪讜谞讱 诇专讗讜转 讗转 讛诪诪砖拽 讛讙专驻讬 讻砖讛诪注专讻转 转注诇讛.\n"
+"讬砖 诇砖讬诐 诇讘 砖砖讗诇讛 讝讜 转讬砖讗诇 讗驻讬诇讜 讗诐 讘讞专转 诇讗 诇讘讚讜拽 讗转 讛讛讙讚专讜转.\n"
+"讘专讜专 砖讛转砖讜讘讛 转讛讬讛 \"诇讗\" 讗诐 讛诪讞砖讘 砖诇讱 爪专讬讱 诇专讜抓 讻砖专转, 讗讜 讗诐\n"
+"诇讗 讛爪诇讞转 诇讛讙讚讬专 讗转 讛转爪讜讙讛 讻专讗讜讬."
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Netmask:"
-msgstr ""
+msgid "We are now going to configure the %s connection."
+msgstr "讗谞讜 注讜诪讚讬诐 诇讛讙讚讬专 讗转 讞讬讘讜专 讛%s."
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
#, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "MandrakeExpert Corporate"
+msgstr "讗讬讙讜讚 MandrakeExpert"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
#, c-format
msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "讗驻砖专讜讬讜转 诪讚驻住转"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "诇讛住讬专 讗转 讛诪讗专讞 讛谞讘讞专"
+
+#: ../../steps.pm:1
#, c-format
-msgid "dhcpd Config..."
-msgstr ""
+msgid "Language"
+msgstr "讘讞讬专转 砖驻讛"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Delete Client"
-msgstr ""
+msgid "Printer model selection"
+msgstr "讘讞讬专转 诪讜讚诇 诪讚驻住转"
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "<-- Edit Client"
-msgstr ""
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "讗讞专讬 砖讬谞讜讬 住讜讙 砖诇 诪讞讬爪讛 %s, 讻诇 讛诪讬讚注 砖注诇讬讛 讬讗讘讚"
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
#, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "%d seconds"
+msgstr "砖谞讬讜转 砖谞讜转专讜: %d"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 专讬拽 讘讻讜谞谉 %s"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Thin Client"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No net boot images created!"
-msgstr ""
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "诪爪讗 诪诪砖拽 \"%s\", 讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘讜?"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "type: %s"
+msgid "Re-configure interface and DHCP server"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "<-- Del User"
-msgstr ""
+msgid "Sound configuration"
+msgstr "讛讙讚专讜转 拽讜诇"
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Add User -->"
-msgstr "<-- 讛讜住驻转 诪砖转诪砖"
+msgid "Photo test page"
+msgstr "讚祝 谞住讬讜谉 砖诇 转诪讜谞讛"
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Custom disk partitioning"
+msgstr "讛转讗诪讛 讗讬砖讬转 砖诇 诪讬讞讜抓 讛讚讬住拽"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Enter Printer Name and Comments"
+msgstr "谞讗 诇讛讻谞讬住 砖诐 诇诪讚驻住转 讜讛注专讛"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
msgstr ""
+"讛诪讚驻住转 讛讘讗讛\n"
+"\n"
+"%s%s\n"
+"诪讞讜讘专讜转 讬砖讬专讜转 诇诪注专讻转 砖诇讱"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Delete All NBIs"
+msgid "type: %s"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<-- Delete"
-msgstr ""
+msgid "Slovakian (QWERTY)"
+msgstr "住诇讜讘拽讬转 (QWERTY)"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/draksound:1
#, c-format
-msgid "This will take a few minutes."
-msgstr "讝讛 讬拽讞 诪住驻专 讚拽讜转 "
+msgid "No Sound Card detected!"
+msgstr "诇讗 讝讜讛讛 讻专讟讬住 拽讜诇!"
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "Build All Kernels -->"
-msgstr "讘谞讬讬转 讻诇 讛讙专注讬谞讬诐 -->"
+msgid "Mouse Port"
+msgstr "驻讜专讟 讛注讻讘专"
#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No NIC selected!"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Ftp Server"
+msgstr "砖专转 ftp"
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "No kernel selected!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Build Whole Kernel -->"
+msgid "%s fonts conversion"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "诪住驻专 讛诪拽砖讬诐 砖讬砖 诇注讻讘专"
+
+#: ../../lang.pm:1
#, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Uganda"
+msgstr "讗讜讙谞讚讛"
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Boot Floppy"
+msgid ""
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"drakTermServ Overview\n"
-"\t\t\t \n"
-" - Create Etherboot Enabled Boot Images:\n"
-" \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-" \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-" \t\tto help manage/customize these images.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
"\n"
-" - Maintain /etc/dhcpd.conf:\n"
-" \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-" \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-" \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-" \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-" \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address 192.168.192.3;\n"
-"\t\t\t\t\t#type fat;\n"
-"\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-" - Maintain /etc/exports:\n"
-" \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \t\tdiskless clients.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
"\n"
-" \t\tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t\t/ (ro,all_squash)\n"
-" \t\t/home SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-" \t\t\n"
-" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-" \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-" \t\tin this respect by adding or removing system users from this "
-"file.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
"\n"
-" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-" \t\tfiles.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
"\n"
-" - Per client system configuration files:\n"
-" \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-" \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-" \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-" \t\tbasis.\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
"\n"
-" - /etc/xinetd.d/tftp:\n"
-" \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-" \t\tdiskless client.\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
"\n"
-" \t\tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \t\tservice tftp\n"
-" \t\t(\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t\t}\n"
-" \t\t\n"
-" \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \t\tputs it's images.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
"\n"
-" - Create etherboot floppies/CDs:\n"
-" \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-" \t\tor CD to initate the boot sequence. drakTermServ will help "
-"generate these images,\n"
-" \t\tbased on the NIC in the client machine.\n"
-" \t\t\n"
-" \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
"\n"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "讗讬讬 拽讜诪讜专讜"
+
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
msgstr ""
+"\n"
+"\n"
+"\n"
+"讗谞讜 注讜诪讚讬诐 诇讛讙讚讬专 讗转 讞讬讘讜专 讛%s.\n"
+"\n"
+"\n"
+"讬砖 诇诇讞讜抓 讗讬砖讜专 讻讚讬 诇讛诪砖讬讱."
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+msgid "Yaboot mode"
+msgstr "诪爪讘 Yaboot"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Add/Del Users"
-msgstr ""
+msgid "USA (cable)"
+msgstr "讗专爪讜转 讛讘专讬转 (讻讘诇讬诐)"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Net Boot Images"
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
+"诇讗 讬讻讜诇 诇讛驻注讬诇 诪讞讚砖 讗转 LiLo!\n"
+"讬砖 诇讛专讬抓 讗转 \"lilo\" 讻诪砖转诪砖 专讗砖讬(root) 诪砖讜专转 讛驻拽讜讚讛 诇讛砖诇诪转 讛转拽谞转 注专讻转 讛谞讜砖讗."
-#: ../../standalone/drakTermServ:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "Generic 3 Button Mouse"
+msgstr "注讻砖讘专 讻诇讬讬 注诐 3 诪拽砖讬诐"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Stop Server"
+msgid "Select another media to restore from"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Start Server"
+msgid "Software Manager"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disable Server"
+msgid ""
+"Restore Description:\n"
+" \n"
+"Only the most recent date will be used, because with incremental \n"
+"backups it is necessary to restore one by one each older backup.\n"
+"\n"
+"So if you don't want to restore a user please unselect all their\n"
+"check boxes.\n"
+"\n"
+"Otherwise, you are able to select only one of these.\n"
+"\n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup. \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Enable Server"
-msgstr ""
+msgid "Re-submit"
+msgstr "讟注谉 诪讞讚砖"
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Mandrake Terminal Server Configuration"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../common.pm:1
#, c-format
-msgid "Remove the last item"
-msgstr ""
+msgid "KB"
+msgstr "KB"
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Add an item"
-msgstr ""
+msgid "Network & Internet"
+msgstr "专砖转 讜讗讬谞讟专谞讟"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Auto Install"
-msgstr "讛转拽谞讛 讗讜讟讜诪讟讬转"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+msgid "Net Boot Images"
msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Congratulations!"
-msgstr ""
+msgid "Sharing of local scanners"
+msgstr "砖讬转讜祝 砖诇 住讜专拽讬诐 诪拽讜诪讬讬诐"
-#: ../../standalone/drakautoinst:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../services.pm:1
#, c-format
-msgid "Creating auto install floppy"
-msgstr "讬爪讬专转 讚讬住拽讟 讛转拽谞讛 讗讜讟讜诪讟讬"
+msgid "Services and deamons"
+msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "manual"
-msgstr ""
+msgid "Remote host name missing!"
+msgstr "砖诐 诪讗专讞 诪专讜讞拽 讞住专!"
-#: ../../standalone/drakautoinst:1
+#: ../../fsedit.pm:1
#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
+msgid "with /usr"
+msgstr "注诐 /usr"
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Automatic Steps Configuration"
-msgstr ""
+msgid "Network"
+msgstr "专砖转"
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "replay"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
+msgid "This password is too simple"
+msgstr "讛住讬住诪讛 驻砖讜讟讛 诪讬讚讬讬"
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Auto Install Configurator"
-msgstr "诪讙讚讬专 讛讛转拽谞讛 讛讗讜讟讜诪讟讬转"
+msgid "Slovakian (QWERTZ)"
+msgstr "住诇讜讘拽讬转 (QWERTZ)"
-#: ../../standalone/drakautoinst:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "I can't find needed image file `%s'."
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Error!"
-msgstr ""
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "讛转拽谞讛 诪讬谞讬诪诇讬转 讗诪讬转讬转 (讘讬讬讞讜讚 诇讗 urpmi)"
#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+" Transfer \n"
+"Now"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
+msgid "Use daemon"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backups will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
+msgid "Authentication"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
+msgid "Additional CUPS servers: "
+msgstr "砖专转讬 CUPS 谞讜住驻讬诐: "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used, because with incremental \n"
-"backups it is necessary to restore one by one each older backup.\n"
-"\n"
-"So if you don't want to restore a user please unselect all their\n"
-"check boxes.\n"
-"\n"
-"Otherwise, you are able to select only one of these.\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
+msgid "Where do you want to mount %s?"
+msgstr "诇讗谉 讘专爪讜谞讱 诇讞讘专 讗转 %s?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Restore Via Network"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %%).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" #> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
+msgid "Algeria"
+msgstr "讗诇讙~专讬讛"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "Initrd-size"
+msgstr "讙讜讚诇 Initrd"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Restore"
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup Now"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Advanced Configuration"
-msgstr ""
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
#, c-format
-msgid "Wizard Configuration"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
+"[OPTION]...\n"
+" --no-confirmation 诇讗 诇讘拽砖 讗讬砖讜专 讘诪爪讘 注讚讻讜谉-诪谞讚专讬讬拽\n"
+" --no-verify-rpm 诇讗 诇讝讛讜转 讞转讬诪讜转 讞讘讬诇讜转\n"
+" --changelog-first 讛爪讙 诇讜讙-砖讬谞讜讬 诇驻谞讬 专砖讬诪转 讛拽讘爪讬诐 讘讞诇讜谉 讛转讬讗讜专\n"
+" --merge-all-rpmnew 砖谞诪爪讗讜 .rpmnew/.rpmsave 诪讬讜注讚 诇诪讝讙 讗转 讻诇 拽讘爪讬"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "View Backup Configuration."
-msgstr ""
+msgid "Setting Default Printer..."
+msgstr "讛讙讚专转 诪讚驻住转 讘专讬专转 诪讞讚诇..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup Now from configuration file"
+msgid "Interface %s (using module %s)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Drakbackup Configuration"
-msgstr ""
+msgid "Name: %s\n"
+msgstr "砖诐: %s\n"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Total Progress"
-msgstr ""
+msgid "Generating preview ..."
+msgstr "转爪讜讙讛 诪拽讚讬诪讛..."
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Sending files..."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "files sending by FTP"
-msgstr ""
+msgid "serial"
+msgstr "住专讬讗诇讬"
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Backup other files"
+msgid "DVD-ROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Backup user files"
+msgid "Georgian (\"Latin\" layout)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
#, c-format
-msgid "Backup system files"
-msgstr ""
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr "讛砖讙转 讛驻专讬讟讬诐 讛讟讜讘讬诐 讘讬讜转专 注诐 讛砖讜转驻讬诐 讛讗住讟专讟讙讬讬诐 砖诇 诪谞讚专讬讬拽 诇讬谞讜拽住"
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Under Devel ... please wait."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please select data to backup..."
-msgstr ""
+msgid "Kenya"
+msgstr "拽谞讬讛"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Please select media for backup..."
-msgstr ""
+msgid "Use ``Unmount'' first"
+msgstr "讛砖转诪砖/讬 讘''谞讬转讜拽'' 拽讜讚诐"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please select data to restore..."
+msgid "Installing mtools packages..."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr ""
+msgid "You must specify a root partition"
+msgstr "讗转讛 讞讬讬讘 诇爪讬讬谉 诪讞讬爪讛 专讗砖讬转"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
+msgid "first step creation"
+msgstr "讬爪讬专转 砖诇讘 专讗砖讜谉"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
-msgstr ""
+msgid "Both Shift keys simultaneously"
+msgstr "砖谞讬 诪拽砖讬 讛Shift 讘讗讜转讜 讛讝诪谉"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Next"
-msgstr "讛讘讗"
+msgid "Select a scanner model"
+msgstr "讬砖 诇讘讞讜专 讚讙诐 砖诇 住讜专拽"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR 讛讚讜专 讛讞讚砖 砖诇"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Previous"
+msgid "Drakbackup Configuration"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
#: ../../standalone/logdrake:1
#, c-format
-msgid "Save"
-msgstr ""
+msgid "Save as.."
+msgstr "砖诪讬专讛 讘砖诐..."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Build Backup"
+msgid ""
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Progress"
+msgid "Korea (North)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Restore From Catalog"
-msgstr ""
+msgid "Autologin"
+msgstr "讻谞讬住讛-讗讜讟讜诪讟讬转"
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
#, c-format
-msgid "Browse to new restore repository."
+msgid "System configuration"
+msgstr "讛讙讚专转 讛诪注专讻转"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Domain Admin Password"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/05-desktop.pl:1
#, c-format
-msgid "CD in place - continue."
+msgid ""
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Custom Restore"
-msgstr "讛转讗诪讛 讗讬砖讬转 砖诇 砖讞讝讜专"
+msgid "Configuring printer ..."
+msgstr "讛讙讚专转 诪讚驻住转 ..."
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Restore all backups"
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
+"讘砖讘讬诇 诇讗讘转讬讞 讗转 砖诇诪讜转 讛谞转讜谞讬诐 讗讞专讬 砖讬谞讜讬 讙讜讚诇 讛诪讞讬爪讛 \n"
+"转转讘爪注讛 住专讬拽转 讚讬住拽 讘讗讬转讞讜诇 讛讘讗 砖诇讱 砖诇 讞诇讜谞讜转(TM)"
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "Restore Failed..."
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Files Restored..."
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Path or Module required"
-msgstr ""
+msgid "Virgin Islands (British)"
+msgstr "讗讬讬 讛讘转讜诇讛 讛讘专讬讟讬讬诐"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Hostname required"
-msgstr ""
+msgid "Bermuda"
+msgstr "讘专诪讜讚讛"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Username required"
+msgid "click here if you are sure."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Password required"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "Host Path or Module"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
-msgid "Host Name"
-msgstr ""
+msgid "Remove"
+msgstr "讛住专讛"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "Lesotho"
+msgstr "诇住讜讟讜"
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
#, c-format
-msgid "Restore Via Network"
-msgstr ""
+msgid "utopia 25"
+msgstr "utopia 25"
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid "Pipe job into a command"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "砖诐 讚讬谞诪讬 讞讚砖 诪讬讜转专 注诇 讬讚讬 讛诇讬讘讛 讘注讝专转 devfs"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Restore From Tape"
-msgstr ""
+msgid "Yes"
+msgstr "讻谉"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Cote d'Ivoire"
+msgstr "讞讜祝 讛砖谞讛讘"
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Which protocol do you want to use?"
+msgstr "讘讗讬讝讛 驻专讜讟讜拽讜诇 讘专爪讜谞讱 诇讛砖转诪砖?"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore From CD"
+msgid "Restore Progress"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
+msgid "Estonia"
+msgstr "讗住讟讜谞讬讛"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "讬砖 诇讘讞讜专 诪讗专讞 砖讘讜 讛住讜专拽讬诐 讛诪拽讜诪讬讬诐 讬讛讬讜 讝诪讬谞讬诐:"
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
#, c-format
msgid ""
-"Restore Selected\n"
-"Files"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"讬砖 诇讱 讞讜专 讘砖讜诇讞谉 讛诪讞讬爪讜转 砖诇讱 讗讱 讗讬谞讬 讬讻讜诇 诇讛砖转诪砖 讘讜.\n"
+"讛驻转专讜谉 讛讬讞讬讚讬 讛讜讗 诇讛讝讬讝 讗转 讛诪讞讬爪讛 讛专讗砖讬转 讻讚讬 诇拽讘诇 讗转 讛讞讜专\n"
+"诇讬讬讚 讛诪讞讬爪讜转 讛谞诇讜讜转."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
+msgid "Channel"
+msgstr "注专讜抓"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "Add"
+msgstr "讛讜住驻讛"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "No Internet Connection Sharing has ever been configured."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "select path to restore (instead of /)"
+msgid " Error while sending mail. \n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Restore Other"
-msgstr ""
+msgid "Keyboard"
+msgstr "诪拽诇讚转"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Restore Users"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Restore system"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Other Media"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "讬砖 诇讘讞讜专 讞讬讘讜专 砖讘专爪讜谞讱 诇注专讜讱"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "Select another media to restore from"
-msgstr ""
+msgid "Please wait, setting security level..."
+msgstr "谞讗 诇讛诪转讬谉, 诪讙讚讬专 专诪转 讗讘讟讞讛..."
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
#, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr ""
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "诇讬谞讜拽住 诪谞讚专讬讬拽 9.1: 驻诇讟驻讜专诪转 讛驻讬转讜讞 讛讗讜诇讟讬诪讟讬讘讬转"
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Restore from Hard Disk."
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "诪讙讚讬专 讛转拽谉 专砖转 %s"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use quota for backup files."
-msgstr ""
+msgid "activated"
+msgstr "驻讜注诇"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please enter the directory to save:"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "诪讜爪讗 讞讘讬诇讜转 诇砖讚专讜讙..."
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use Hard Disk to backup"
-msgstr ""
+msgid "Mount point: "
+msgstr "谞拽讜讚转 讞讬讘讜专:"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "please choose the date to restore"
+msgid "parse all fonts"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Backup the system files before:"
-msgstr ""
+msgid "With X"
+msgstr "注诐 X"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "讛讙讚专转 诪住驻专-专讗砖讬诐"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "OK to restore the other files."
+msgid "No browser available! Please install one"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid " Restore Configuration "
+msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
+"\n"
+"%s"
msgstr ""
+"诇砖诪讜专 讗转 讛砖讬谞讜讬讬诐?\n"
+"讛讛讙讚专讜转 讛谞讜讻讞讬讜转 讛谉:\n"
+"\n"
+"%s"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "讗住讜专 诇讛砖转诪砖 讘ReiserFS 诇诪讞讬爪讛 拽讟谞讛 诪32MB"
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
-msgid " All of your selected data have been "
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Backup files are corrupted"
+msgid "Domain name"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please uncheck or remove it on next time."
+msgid "Sharing of local printers"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/90errata.php3"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Available printers"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "专讬拽"
+
+#: ../../help.pm:1
#, c-format
msgid ""
-"List of data to restore:\n"
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "text width"
+msgstr "专讜讞讘 讟拽住讟"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "诇讗谉 讘专爪讜谞讱 诇讞讘专 讗转 讛讛转拽谉 %s?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "\t-Network by rsync.\n"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "诪诪砖拽 \"%s\""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "With basic documentation (recommended!)"
+msgstr "注诐 诪住诪讻讬诐 讘住讬住讬讬诐 (诪讜诪诇抓!)"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "1 button"
+msgstr "讻驻转讜专 讗讞讚"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "\t-CDROM.\n"
+msgid ""
+"\n"
+"There are %d unknown printers directly connected to your system"
msgstr ""
+"\n"
+"讬砖 %d 诪讚驻住讜转 诇讗 讬讚讜注讜转 讛诪讞讜讘专讜转 诇诪注专讻转 砖诇讱"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Test"
+msgstr "讘讚讬拽讛"
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-"- Daemon (%s) include:\n"
+"Allow/Forbid direct root login."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "Korea"
+msgstr "拽讜专讗讛"
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
+msgid "Your choice? (default `%s'%s) "
+msgstr "讘讞讬专讛 砖诇讱? (讘专讬专转 诪讞讚诇 `%s'%s) "
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "\tDo not include System Files\n"
+msgid "Raw printer"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "砖诐 讛诪注讘讚 讛专讬砖诪讬 诇驻讬 讛讬爪专谉"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "Vendor"
+msgstr "讬爪专谉"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+msgid "Interface %s"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Configure mouse"
+msgstr "讛讙讚专转 注讻讘专"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "讬砖 诇讘讞讜专 讗转 谞拽讜讚讜转 讛讞讬讘讜专"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "OK"
+msgstr "讗讬砖讜专"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " on device: %s"
-msgstr ""
+msgid "Yugoslavian (latin)"
+msgstr "讬讜讙讜住诇讘讬转 (latin)"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "RW"
-msgstr ""
+msgid "Installing"
+msgstr "诪转拽讬谉"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Launch userdrake"
+msgstr "讛驻注诇转 userdrake"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "Is this an install or an upgrade?"
+msgstr "讛讗诐 讝讜 讛转拽谞讛 讗讜 注讚讻讜谉?"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "ISDN card"
+msgstr "诪讜讚诐 ISDN "
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
-"\n"
-"- Other Files:\n"
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
msgstr ""
+"讻讚讬 诇砖转祝 诪讬讚注 讜诇讘谞讜转 转讜讻谞讜转 诇诇讬谞讜拽住, 讛爪讟专驻讜 讗诇 驻讜专讜诪讬 讛讚讬讜谞讬诐 砖诇谞讜 注诇 讚驻讬 讛"
+"\"拽讛讬诇讛\" 砖诇谞讜."
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
"\n"
-"- User Files:\n"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
"\n"
-"Backup Sources: \n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Printer on remote CUPS server"
+msgstr "诪讚驻住转 注诇 砖专转 cups 诪专讜讞拽"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Backup Users"
-msgstr ""
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "谞讻砖诇 讘讛住专转 讛诪讚驻住转 \"%s\" 诪Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Backup system"
-msgstr ""
+msgid "delete"
+msgstr "诇诪讞讜拽"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Please choose what you want to backup"
+msgid "here if no."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "DHCP host name"
+msgstr "砖诐 诪讗专讞 DHCP"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "on CDROM"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
-msgid "across Network"
+msgid "Please choose which serial port your mouse is connected to."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Did it work properly?"
+msgstr "讛讗诐 讝讛 注讘讚 讻专讜讗讬?"
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Please choose where you want to backup"
+msgid "Poor"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "More Options"
-msgstr "注讜讚 讗驻砖专讜讬讜转"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "When"
+msgid "The DHCP start range"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Where"
-msgstr ""
+msgid "Grenada"
+msgstr "讙专谞讚讛"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "What"
-msgstr ""
+msgid "Unsafe"
+msgstr "诇讗 讘讟讜讞"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s 住拽讟讜专讬诐"
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
+msgid "No"
+msgstr "诇讗"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
+msgid "Guadeloupe"
+msgstr "讙讜讜讗讚诇讜驻"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
+msgid "could not find any font.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
#, c-format
-msgid "Use daemon"
-msgstr ""
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘诪拽砖 讛BackSpace (->) 讻讚讬 诇讛讞讝讬专 诪讞讬拽讛 讘诪住讜祝?"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
#, c-format
-msgid "monthly"
-msgstr ""
+msgid "Vertical refresh rate"
+msgstr "拽爪讘 专注谞讜谉 讗谞讻讬"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
-msgid "weekly"
-msgstr ""
+msgid "Entering step `%s'\n"
+msgstr "谞讻谞住 诇砖诇讘 `%s'\n"
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
#, c-format
-msgid "daily"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "hourly"
-msgstr ""
+msgid "Removing %s ..."
+msgstr "诪住讬专 讗转 %s ..."
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Niger"
+msgstr "谞讬讙专"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "CDROM / DVDROM"
-msgstr ""
+msgid "No printer"
+msgstr "讗讬谉 诪讚驻住转"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Please enter the directory to save to:"
-msgstr ""
+msgid "alert configuration"
+msgstr "讛讙讚专讜转 讛转专讗讜转"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check if you want to eject your tape after the backup."
+msgid "NetWare Printer Options"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Please check if you want to erase your tape before the backup."
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid "General"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "Printing system: "
+msgstr "诪注专讻转 讛讛讚驻住讛:"
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
#, c-format
-msgid "Use tape to backup"
-msgstr ""
+msgid "Add a user"
+msgstr "讛讜住驻转 诪砖转诪砖"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "No CD device defined!"
+msgid "Network configuration (%d adapters)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
+msgid "Mandatory package %s is missing"
+msgstr "讞讘讬诇讛 讘住讬住讬转 %s 讞住专讛"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr ""
+msgid "Philippines"
+msgstr "讛驻讬诇讬驻讬谞讬诐"
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr ""
+msgid "Ok"
+msgstr "讗讬砖讜专"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " Erase Now "
+msgid "Print Queue Name"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr ""
+msgid "Do you want to use aboot?"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘aboot?"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Please check if you are using CDRW media"
+msgid "Belarusian"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please check for multisession CD"
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "谞讗 诇讘讞讜专 讗转 讙讜讚诇 讛诪讚讬讛 讘诪讙讛-讘讬转 砖诇 讛DVD/CD 砖诇讱"
+msgid "Move files to the new partition"
+msgstr "讛注讘专 拽讘爪讬诐 诇诪讞讬爪讛 讛讞讚砖讛"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Restore From Catalog"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Need hostname, username and password!"
+msgid "Pitcairn"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Remember this password"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Please enter your password"
-msgstr ""
+msgid "group :"
+msgstr "拽讘讜爪讛 :"
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
#, c-format
-msgid "Please enter your login"
-msgstr ""
+msgid "mounting partition %s in directory %s failed"
+msgstr "讞讬讘讜专 讛诪讞讬爪讛 %s 诇转讬拽讬讬讛 %s 谞讻砖诇"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
+msgid "Lilo screen"
+msgstr "诪住讱 Lilo"
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
-msgid "Please enter the host name or IP."
-msgstr ""
+msgid "LILO with graphical menu"
+msgstr "LILO 注诐 转驻专讬讟 讙专驻讬"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Estimating"
+msgstr "谞讜转专讜"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid ""
-" Transfer \n"
-"Now"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "讗讬谉 讗驻砖专讜转 诇讘讟诇 讞讘讬诇讛 讝讜 诪讻讬讜讜谉 砖讛讬讗 讻讘专 诪讜转拽谞转"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "诇讛诪砖讬讱 讘讻诇 诪拽专讛?"
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Net Method:"
-msgstr ""
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "诪讞驻砖 讞讘讬诇讜转转 讝诪讬谞讜转 讜讘讜谞讛 讘住讬住 谞转讜谞讬诐 砖诇 rpm... "
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Use network connection to backup"
+msgid "Does not appear to be recordable media!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "Users"
-msgstr ""
+msgid "Specify options"
+msgstr "爪讬讬谉 讗驻砖专讜讬讜转"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Windows (FAT32)"
-msgstr ""
+msgid "Vanuatu"
+msgstr "讜谞讜讗讟讜"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Use Incremental Backups (do not replace old backups)"
+msgid "Either the server name or the server's IP must be given!"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Remove Selected"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
+"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
msgstr ""
+"讚讬住拽讟 讛讗转讞讜诇 讛诪讜转讗诐 诪住驻拽 诇讱 讚专讱 诇讛驻注讬诇 讗转 讛诇讬谞讜拽住 诇诇讗 转诇讜转 讘讟讜注谉 讛诪注专讻转 "
+"砖诇讱.\n"
+"讝讛 砖讬诪讜砖讬 讗诐 讗讬谞讱 专讜爪讛 诇讛转拽讬谉 LILO (讗讜 GRUB) 讘诪注专讻转 砖诇讱, 讗讜 砖诪注专讻转 讗讞专转 "
+"讛住讬专讛\n"
+" 讗转 LILO, 讗讜 LILO 诇讗 注讜讘讚转 注诐 讛诪注专讻转 砖诇讱. 讚讬住拽讟 讗转讞讜诇 诪讜转讗诐 讬讻讜诇 诇砖诪砖 讙诐 "
+"诇讛讬讜转\n"
+"砖讬诪讜砖讬 注诐 转诪讜谞转 讛讛爪诇讛 砖诇 诪谞讚专讬讬拽, 讜转专讙讜诐 诇诪注专讻转 诇讛转讗讜砖砖 讘拽诇讜转 诪转拽诇讜转 讗讜 "
+"砖讙讬讗讜转.\n"
+"讗诐 讘专爪讜谞讱 诇讬爪讜专 讚讬住拽讟 讗转讞讜诇 砖诇 讛诪注专讻转 砖诇讱, 讬砖 诇讛讻谞讬住 讚讬住拽讟 诇讻讜谞谉 讜诇诇讞讜抓 "
+"\"讗讬砖讜专\"."
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "讗住讜专 诇讛砖转诪砖 讘诪注专讻转 拽讘爪讬诐 诪拽讜讚讚转 诇谞拽讜讚转 讛讞讬讘讜专 %s"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid "Please check all users that you want to include in your backup."
+msgid "Norfolk Island"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "讛转拽谞转 注专讻转 谞讜砖讗 谞讻砖诇讛!"
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Nothing to do"
+msgstr "砖讜诐 讚讘专 诇注砖讜转"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Use incremental backup (do not replace old backups)"
+msgid "Use for loopback"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Backup your System files. (/etc directory)"
+msgid "Mandrake Bug Report Tool"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "砖讬诪讜砖 讘 pppoe"
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
+msgid "Moving files to the new partition"
+msgstr "诪注讘讬专 拽讘爪讬诐 诇诪讞讬爪讛 讛讞讚砖讛"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s 注诐 讞讜诪专讛 诪讗讬爪转 转诇转 诪讬诪讚 谞住讬讜谞讬转"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
-msgid "File Selection"
-msgstr ""
+msgid "Advanced"
+msgstr "诪转拽讚诐"
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Transfer"
+msgstr "讛注讘专讛"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid " Error while sending mail. \n"
+msgid "Dvorak (Swedish)"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "More Options"
+msgstr "注讜讚 讗驻砖专讜讬讜转"
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "Afghanistan"
+msgstr "讗驻讙谞讬住讟谉"
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "Burundi"
+msgstr "讘讜专讜谞讚讬"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No changes to backup!"
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Hard Disk Backup files..."
-msgstr ""
+msgid "Read carefully!"
+msgstr "讬砖 诇拽专讜讗 讘讛拽驻讚讛!"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "Backup Other files..."
+msgid "RW"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
-msgid "Backup User files..."
+msgid "Port"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Backup system files..."
+msgid "No (experts only)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No tape in %s!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "诇讞抓 讗谞讟专 讻讚讬 诇讟注讜谉 讗转 讛诪注专讻转 砖谞讘讞专讛, 'e' 诇注专讬讻讛 砖诇 讛"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "This may take a moment to erase the media."
+msgid "Set-GID"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Not erasable media!"
-msgstr ""
+msgid "The encryption keys do not match"
+msgstr "诪驻转讞讜转 讛讛爪驻谞讛 诇讗 转讜讗诪讬诐"
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "诪拽砖 \"讞诇讜谞讜转\" 讛讬诪谞讬"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "No CDR/DVDR in drive!"
+msgid "CDROM / DVDROM"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
#, c-format
-msgid "WebDAV remote site already in sync!"
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Total progess"
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
msgstr ""
+"讛谞讛 专砖讬诪讛 砖诇 讗驻砖专讜讬讜转 讛拽讬讬诪讜转 讘诪讚驻住转 讛谞讜讻讞讬转:\n"
+"\n"
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "专讝讜诇讜爪讬讛"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"drakfirewall configurator\n"
"\n"
-"without being prompted for a password."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "%s not responding"
+msgid ""
+"Please enter your username, password and domain name to access this host."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Can't find %s on %s"
-msgstr ""
+msgid "Remove selected host"
+msgstr "诇讛住讬专 讗转 讛诪讗专讞 讛谞讘讞专"
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Network configuration"
+msgstr "讛讙讚专转 讛专砖转"
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
#, c-format
-msgid "Bad password on %s"
-msgstr ""
+msgid "No sharing"
+msgstr "诇诇讗 砖讬转讜祝"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid "Move selected rule down one level"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
#, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr ""
+msgid "TB"
+msgstr "TB"
#: ../../standalone/drakbackup:1
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid "Please check if you are using a DVDR device"
msgstr ""
#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+msgid "FATAL"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
#, c-format
msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
"\n"
-" DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "诪讞讬拽讛"
+
+#: ../../security/help.pm:1
#, c-format
msgid ""
+"Arguments: (arg)\n"
"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"讘讗驻砖专讜转讬 诇讛讙讚讬专 讗转 诪讞砖讘讱 讻讱 砖讬注诇讛 讗讜讟讜诪讟讬转 讗转 讛诪诪砖拽 讛讙专驻讬(Xfree)讘注转 讛讗转讞讜诇.\n"
+"讛讗诐 讘专爪讜谞讱 砖Xfree 讬注诇讛 讘讝诪谉 讗转讞讜诇?"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "INFO"
-msgstr ""
+msgid "Build the disk"
+msgstr "讘谞讬讬转 讛讚讬住拽"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "FATAL"
-msgstr ""
+msgid "Disconnect %s"
+msgstr "诪谞转拽 %s"
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "WARNING"
+msgid "Status:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "驻专讜拽住讬 HTTP"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Installation of %s failed. The following error occured:"
+msgid "SSH Server"
+msgstr "砖专转 SSH"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "No, I don't want autologin"
-msgstr "诇讗, 诇讗 专讜爪讛 讻谞讬住讛 讗讜讟讜诪讟讬转"
+msgid "European protocol"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "讻谉, 讘专爪讜谞讬 讻谞讬住讛 讗讜讟讜诪讟讬转 注诐 讝讛 (诪砖转诪砖, 砖讜诇讞谉 注讘讜讚讛)"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", 诪讚驻住转 \"%s\" 注诇 砖专转 \"%s\" "
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "讛驻注诇 讗转 讛住讘讬讘讛 讛讙专驻讬转 讻讗砖专 讛诪注专讻转 砖诇讱 诪转讞讬诇讛"
+msgid "Error"
+msgstr "砖讙讬讗讛"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "System mode"
-msgstr "诪爪讘 诪注专讻转"
+msgid "allow \"su\""
+msgstr "讛专砖讛 \"su\""
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Bootsplash"
-msgstr "讟注讬谞转 住驻诇讗砖"
+msgid "Australia"
+msgstr "讗讜住讟专诇讬讛"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Lilo screen"
-msgstr "诪住讱 Lilo"
+msgid "please wait during ttmkfdir..."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid "Configure only card \"%s\"%s"
msgstr ""
-"\n"
-"讘讞讬专转 注专讻转 谞讜砖讗\n"
-"诇lilo 讜bootsplash,\n"
-"讘讗驻砖专讜转 诇讘讞讜专 注专讻转\n"
-" 谞讜砖讗 谞驻专讚转 诇讻诇 讗讞讚 诪讛诐"
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Themes"
-msgstr "注专讻讜转 谞讜砖讗"
+msgid "Level"
+msgstr "砖诇讘"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Splash selection"
-msgstr "讘讞讬专转 住驻诇讗砖"
+msgid "Change the printing system"
+msgstr "讛讞诇驻转 诪注专讻转 讛讛讚驻住讛"
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
-"讛砖讬诪讜砖 讛讜讗 讻专讙注 讘%s 讻诪谞讛诇 讟注讬谞讛.\n"
-"讬砖 诇诇讞讜抓 注诇 讛讙讚专讜转 讻讚讬 诇讛专讬抓 讗转 讗砖祝 讛讛讙讚专讛."
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "讛转拽谞转 注专讻讜转 谞讜砖讗 诇讟讜注谉 讛住驻诇讗砖 讜Lilo 讛讜砖诇诪讛 讘讛爪诇讞讛"
+"讛诪注专讻转 砖诇讱 转讜诪讻转 讘讛讙讚专转 诪住驻专 专讗砖讬诐.\n"
+"诪讛 讘专爪讜谞讱 诇注砖讜转?"
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
#, c-format
-msgid "Theme installation failed!"
-msgstr "讛转拽谞转 注专讻转 谞讜砖讗 谞讻砖诇讛!"
+msgid "Configure services"
+msgstr "讛讙讚专转 砖讬专讜转讬诐"
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Notice"
-msgstr "诇砖讬诐 诇讘"
+msgid "Broadcast Address:"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Relaunch 'lilo'"
-msgstr "讟注谉 诪讞讚砖 'lilo'"
+msgid "mount failed: "
+msgstr "讞讬讘讜专 谞讻砖诇:"
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
msgstr ""
-"诇讗 讬讻讜诇 诇讛驻注讬诇 诪讞讚砖 讗转 LiLo!\n"
-"讬砖 诇讛专讬抓 讗转 \"lilo\" 讻诪砖转诪砖 专讗砖讬(root) 诪砖讜专转 讛驻拽讜讚讛 诇讛砖诇诪转 讛转拽谞转 注专讻转 讛谞讜砖讗."
+"拽专谞诇 讛讙谞讜/诇讬谞讜拽住 爪专讬讱 诇讛驻注讬诇 诇讜诇讗讛 讞讬砖讜讘讬转 讘讝诪谉 讛讗转讞讜诇 讘讻讚讬 诇讝讛讜转 住驻讬专转 "
+"砖注讜谉. 讛转讜爪讗讛 诪讗讜讞住谞转 砖 bogomips 讻讚专讱 诇\"讗讘讞讜谉\" 讛诪注讘讚"
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "转诪讜谞讛"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "诇讗 讬讻讜诇 诇讛驻注讬诇 mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "谞讻砖诇 诇讛讜住讬祝 讗转 讛诪讚驻住转 \"%s\" 诇Star Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
#, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+msgid "Remote Administration"
msgstr ""
-"诇讗 讬讻讜诇 诇专砖讜诐 诇/etc/sysconfig/bootsplash\n"
-"讛拽讜讘抓 诇讗 拽讬讬诐."
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
#, c-format
-msgid "Write %s"
-msgstr "讻转讜讘 %s"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "诇讗 讬讻讜诇 诇讻转讜讘 讗诇 /etc/sysconfig/bootsplash."
+msgid "Selected All"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Lilo message not found"
-msgstr "讛讜讚注转 Lilo 诇讗 谞诪爪讗讛"
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - 诪注专转 讛讚驻住讛 谞驻讜爪讛 砖诇 讬讜谞讬拽住"
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Copy %s to %s"
-msgstr "诪注转讬拽 %s 诇%s"
+msgid "Webmin Service"
+msgstr "砖讬专讜转 Webmin"
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "Backup %s to %s.old"
-msgstr "诪讙讘讛 %s 诇%s.old"
+msgid "device"
+msgstr "讛转拽谉"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
-msgid "Create new theme"
-msgstr "讬爪讬专转 注专讻转 谞讜砖讗 讞讚砖讛"
+msgid "All"
+msgstr "讛讻诇"
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"讛爪讙转 注专讻转 谞讜砖讗\n"
-"转讞转 诪住讜祝"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "讘讗讬讝讛 诪注专讻转 讛讚驻住讛 讘专爪讜谞讱 诇讛砖转诪砖?"
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Install themes"
-msgstr "讛转拽谞转注专讻讜转 谞讜砖讗"
+msgid "Greece"
+msgstr "讬讜讜谉"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Lilo/grub mode"
-msgstr "诪爪讘 Lilo/grub "
+msgid "An error occurred"
+msgstr "砖讙讬讗讛 讛转专讞砖讛"
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Yaboot mode"
-msgstr "诪爪讘 Yaboot"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"讞讜讘讛 诇砖讚专讙 讞讘讬诇讛 讝讜.\n"
+"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讘讟诇 讗转 讘讞讬专转讛?"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "<control>Q"
-msgstr "<Ctrl>Q"
+msgid "Tamil (Typewriter-layout)"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "/File/_Quit"
-msgstr "/拽讜讘抓/_讬爪讬讗讛"
+msgid "manual"
+msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/_File"
-msgstr "/_拽讜讘抓"
+msgid "Printer manufacturer, model, driver"
+msgstr "讬爪专谉 诪讚驻住转, 诪讜讚诇, 诪谞讛诇 讛转拽谉"
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Boot Style Configuration"
-msgstr "讛讙讚专转 住讙谞讜谉 讟注讬谞转 讛诪注专讻转"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "No browser available! Please install one"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
+"转讬拽讬讬讛 %s 讻讘专 讻讜诇诇转 诪讬讚注\n"
+"(%s("
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid "Printer on NetWare server"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Package not installed"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "转谉 讗转 讙讜讚诇 讛讝讻专讜谉 讘MB"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Not installed"
+msgid "Real name"
+msgstr "砖诐 讗诪讬转讬"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "done"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Standalone Tools"
+msgid "Please uncheck or remove it on next time."
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Report"
+msgid "Higher"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "讬砖 诇讘讞讜专 讗转 讛诪讞讬爪讛 砖讘专爪讜谞讱 诇驻专诪讟"
+
+#: ../../standalone/drakxtv:1
#, c-format
msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Release: "
+msgid "Can't find %s on %s"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Kernel:"
+msgid "Japanese 106 keys"
msgstr ""
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Package: "
-msgstr ""
+msgid "This will take a few minutes."
+msgstr "讝讛 讬拽讞 诪住驻专 讚拽讜转 "
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Application:"
-msgstr ""
+msgid "Burkina Faso"
+msgstr "讘讜专拽讬谞讛 驻讗住讜"
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Configuration Wizards"
-msgstr ""
+msgid "Use scanners on remote computers"
+msgstr "砖讬诪讜砖 讘住讜专拽讬诐 转讞转 诪讞砖讘讬诐 诪专讜讞拽讬诐"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Userdrake"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "诇诪讞讜拽 讗转 讛讻诇诇 讛谞讘讞专"
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Windows Migration tool"
-msgstr ""
+msgid "Accessing printers on remote CUPS servers"
+msgstr "讙讬砖讛 诇诪讚驻住转 注诇 砖专转 cups 诪专讜讞拽"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Urpmi"
-msgstr ""
+msgid "Insert a floppy in %s"
+msgstr "谞讗 诇讛讻谞讬住 讚讬住拽讟 讘%s"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "Software Manager"
-msgstr ""
+msgid "Maldives"
+msgstr "讛讗讬讬诐 讛诪诇讚讬讘讬讬诐"
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
#, c-format
-msgid "Remote Control"
-msgstr ""
+msgid "compact"
+msgstr "拽讜诪驻拽讟讬"
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
#, c-format
-msgid "Msec"
-msgstr ""
+msgid "1 minute"
+msgstr "讚拽讛 讗讞转"
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Menudrake"
-msgstr ""
+msgid "on channel %d id %d\n"
+msgstr "讘注专讜抓 %d 讝讬讛讜讬 %d\n"
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Mandrake Online"
-msgstr ""
+msgid ", multi-function device"
+msgstr ", 讛转拽谉 专讘-讗驻砖专讜讬讜转"
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "Laos"
+msgstr "诇讗讜住"
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Synchronization tool"
-msgstr ""
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "讗讬谉 诪讞讬爪转 FAT 诇砖讬谞讜讬 讙讜讚诇 讗讜 诇砖讬诪讜砖 讻loopback - 诇讗 诪住驻讬拽 诪拽讜诐 谞讜转专"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "First Time Wizard"
-msgstr ""
+msgid "Up"
+msgstr "诇注诇讜转"
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mandrake Control Center"
-msgstr ""
+msgid "Firewall"
+msgstr "讞讜诪转 讗砖"
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
+msgid "Area:"
+msgstr "讗讬讝讜专:"
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Parameters"
+msgid "(E)IDE/ATA controllers"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Internet Connection Configuration"
+msgid "Printer Server"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "DHCP Client"
-msgstr ""
+msgid "Disconnection from the Internet complete."
+msgstr "讛讛转谞转拽讜转 诪讛讗讬谞讟专谞讟 讛讜砖诇诪讛 讘讛爪诇讞讛."
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "Custom configuration"
+msgstr "讛讙讚专讜转 诪讜转讗诪讜转 讗讬砖讬转"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Connection type: "
+msgid "Saint Pierre and Miquelon"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Profile: "
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Internet connection configuration"
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
+msgid "Portugal"
+msgstr "驻讜专讟讜讙诇"
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "讛讗诐 讬砖 诇讱 注讜讚 讗讞讚?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "activate now"
-msgstr ""
+msgid ", printing to %s"
+msgstr ", 讛讚驻住讛 讗诇 %s"
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
#, c-format
-msgid "deactivate now"
+msgid "Assign host name from DHCP address"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "DHCP client"
-msgstr ""
+msgid "Toggle to normal mode"
+msgstr "注讘讜专 诇诪爪讘 专讙讬诇"
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Started on boot"
-msgstr ""
+msgid "Generic"
+msgstr "讻诇诇讬"
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Boot Protocol"
-msgstr ""
+msgid "Cylinder %d to %d\n"
+msgstr "爪讬诇讬谞讚专 %d 诇%d\n"
#: ../../standalone/drakconnect:1
#, c-format
-msgid "Adapter %s: %s"
+msgid "New profile..."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "LAN Configuration"
-msgstr ""
+msgid "Which disk do you want to move it to?"
+msgstr "诇讗讬讝讛 讚讬住拽 讘专爪讜谞讱 诇讛注讘讬专 讗转 讝讛?"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "LAN configuration"
-msgstr ""
+msgid "Display logo on Console"
+msgstr "讛爪讙 住诪诇 讘诪住讜祝"
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Windows Domain"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Connect..."
-msgstr ""
+msgid "Interface %s (on network %s)"
+msgstr "诪诪砖拽 %s (注诇 专砖转 %s)"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Disconnect..."
+msgid "INFO"
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Not connected"
+msgid "Wallis and Futuna"
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Connected"
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Is FPU present"
+msgstr "讛讗讬诐 FPU 谞讜讻讞"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Interface:"
-msgstr ""
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "诇讗 谞诪爪讗讜 住讜专拽讬诐 讝诪讬谞讬诐 讘诪注专讻转 砖诇讱.\n"
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
#, c-format
-msgid "Gateway:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"诪爪讟注专, 讗讬谉 诪讬讚注 \n"
+"谞讜住祝 注诇 砖讬专讜转 讝讛."
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Apply"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Click here to launch the wizard ->"
-msgstr ""
+msgid "Is this correct?"
+msgstr "讛讗诐 讝讛 谞讻讜谉?"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Wizard..."
+msgid "Marshall Islands"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Status:"
+msgid "Windows (FAT32)"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
#, c-format
-msgid "Type:"
-msgstr ""
+msgid "Root password"
+msgstr "住讬住诪转 诪砖转诪砖-注诇"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Internet access"
-msgstr ""
+msgid "Build All Kernels -->"
+msgstr "讘谞讬讬转 讻诇 讛讙专注讬谞讬诐 -->"
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Hostname: "
+msgid "if set to yes, report unowned files."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Configure Local Area Network..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
msgstr ""
+"讗讬谉 诇讱 诪讞讬爪转 讝讻专讜谉 讜讬专讟讜讗诇讬\n"
+"\n"
+"诇讛诪砖讬讱 讘讻讜诇 讗讜驻谉 ?"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "State"
-msgstr ""
+msgid "Server IP missing!"
+msgstr "讞住专讛 讻转讜讘转 讛IP 砖诇 讛砖专转!"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Driver"
-msgstr ""
+msgid "Suriname"
+msgstr "住讜专讬谞讗诐"
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
#, c-format
-msgid "Protocol"
-msgstr "驻专讜讟讜拽讜诇"
+msgid "Enable ACPI"
+msgstr "讗讬驻砖讜专 ACPI"
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
#, c-format
-msgid "Interface"
-msgstr "诪诪砖拽"
+msgid "Graphical Environment"
+msgstr "住讘讬讘讛 讙专驻讬转"
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure Internet Access..."
-msgstr ""
+msgid "Gibraltar"
+msgstr "讙~讬讘专诇讟专"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Wait please"
+msgid "on Tape Device"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
+msgid "Do nothing"
+msgstr "诇讗 诇注砖讜转 讻诇讜诐"
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "New profile..."
+msgid "Delete Client"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Profile to delete:"
-msgstr ""
+msgid "Filesystem type: "
+msgstr "住讜讙 诪注专讻转 拽讘爪讬诐:"
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Del profile..."
-msgstr ""
+msgid "Starting network..."
+msgstr "诪转讞讬诇 专砖转..."
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
+msgid "Vietnam"
+msgstr "讜讬讬讟谞讗诐"
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "/_Fields description"
msgstr ""
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "讬讬注讜诇 讛讗讘讟讞讛 讚专讱 诪谞讚专讬讬拽 诇讬谞讜拽住"
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
+msgid "Help"
+msgstr "注讝专讛"
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "诪住驻专 讛讟诇驻讜谉 讛驻专讟讬 砖诇讱"
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "讗讬讝讛 讙讜讚诇 讘专爪讜谞讱 诇讛砖讗讬专 诇讞诇讜谞讜转 讘-"
+
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
msgstr ""
+"讚驻讬 讛谞住讬讜谉 谞砖诇讞讜 诇讛讚驻住讛.\n"
+"讬讻讜诇 诇讛讬讜转 砖讬讬拽讞 讻诪讛 讝诪谉 注讚 砖讛诪讚驻住转 转转讞讬诇 讘讛讚驻住讛.\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Be sure a media is present for the device %s"
+msgid "Username required"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
#, c-format
-msgid "Build the disk"
-msgstr "讘谞讬讬转 讛讚讬住拽"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Output"
-msgstr ""
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "讗驻砖专讜讬讜转 诪讚驻住转 SMB (讞诇讜谞讜转 9x/nt)"
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove a module"
-msgstr "讛住专转 诪讜讚讜诇"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Add a module"
-msgstr "讛讜住驻转 诪讜讚讜诇"
+msgid "mkinitrd optional arguments"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "omit scsi modules"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
msgstr ""
+"讙诇讬砖讛 讘讗讬谞讟专谞讟 注诐 诪讜讝讬诇讛 讗讜 拽讜谞拽讬, 拽专讬讗转 讚讜讗诇 注诐 Evolution 讗讜 Kmail, 讬爪讬专转 "
+"诪住诪讻讬诐 注诐 Kword."
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "if needed"
-msgstr "讗诐 讚专讜砖"
+msgid "Protocol for the rest of the world"
+msgstr "驻专讜讟讜拽讜诇 诇砖讗专 讛注讜诇诐"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "omit raid modules"
-msgstr ""
+msgid "Print test pages"
+msgstr "讛讚驻住转 讚驻讬 谞住讬讜谉"
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "force"
-msgstr "讛讻专讞/讬"
+msgid "64 MB or more"
+msgstr "64 MB 讗讜 讬讜转专"
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "mkinitrd optional arguments"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
msgstr ""
+"谞讗 诇讘讞讜专 讗转 讚驻讬 讛谞住讬讜谉 砖讘专爪讜谞讱 诇讛讚驻讬住.\n"
+"讞砖讜讘: 注诇讜诇 诇拽讞转 讝诪谉 专讘 诇讚祝 讛谞住讬讜谉 砖诇 讛转诪讜谞讛 诇讛讬讜转 诪讜讚驻住 讜讘诪讚驻住讜转 诇讬讬讝专 注诐 "
+"讝讻专讜谉 谞诪讜讱 讝讛 注诇讜诇 讗驻讬诇讜 诇讗 诇讛讬讜转 诪讜讚驻住 讘讻诇诇. 讘专讜讘 讛诪拽专讬诐 讬砖 诪住驻讬拽 讝讻专讜谉 "
+"诇讛讚驻住转 讚祝 谞住讬讜谉 专讙讬诇."
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Expert Area"
-msgstr "讗讬讝讜专 诪讜诪讞讬诐"
+msgid "Please select the device where your %s is attached"
+msgstr "谞讗 诇讘讞讜专 讗转 讛讛转拽谉 砖讗诇讬讜 讛%s 砖诇讱 诪讞讜讘专"
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "kernel version"
-msgstr "讙讬专住转 讙专注讬谉"
+msgid "Not formatted\n"
+msgstr "诇讗 诪驻讜专诪讟\n"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "default"
-msgstr "讘专讬专转 诪讞讚诇"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "General"
+msgid "PXE Server Configuration"
+msgstr "讛讙讚专转 砖专转 PXE"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup the system files before:"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
#, c-format
-msgid "boot disk creation"
-msgstr "讬爪讬专转 讚讬住拽讟 讛驻注诇转 诪注专讻转"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
#, c-format
-msgid "drakfloppy"
-msgstr "讚专拽讚讬住拽讟"
+msgid "First floppy drive"
+msgstr "讻讜谞谉 讚讬住拽讟讬诐 专讗砖讜谉"
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Size"
-msgstr "讙讜讚诇"
+msgid "/File/_Quit"
+msgstr "/拽讜讘抓/_讬爪讬讗讛"
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Module name"
+msgid "Dvorak"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Post Uninstall"
-msgstr ""
+msgid "Choose the new size"
+msgstr "讬砖 诇讘讞讜专 讗转 讛讙讜讚诇 讛讞讚砖"
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Remove fonts on your system"
-msgstr ""
+msgid "Media class"
+msgstr "住讜讙 诪讚讬讛"
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Initial tests"
-msgstr ""
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "讛 %s 讗讬谞讜 讬讚讜注 讘讙讬专住讗 讝讜 砖诇 Scandrake."
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Post Install"
+msgid "Faroe Islands"
msgstr ""
#: ../../standalone/drakfont:1
#, c-format
-msgid "Install & convert Fonts"
+msgid "Restart XFS"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Copy fonts on your system"
+msgid "Add host/network"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Remove List"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Selected All"
+msgid "Please enter the directory to save to:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Model name"
+msgstr "砖诐 诪讜讚诇"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "here if no."
-msgstr ""
+msgid "Albania"
+msgstr "讗诇讘谞讬讛"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "click here if you are sure."
+msgid "No CDR/DVDR in drive!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Install List"
+msgid "British Indian Ocean Territory"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
+msgid "Normal Mode"
+msgstr "诪爪讘 谞讜专诪诇讬"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
msgstr ""
-"诇驻谞讬 讛转拽谞转 讙讜驻谞讬诐, 注诇讬讬讱 诇讜讜讚讗 砖讘讗驻砖专讜转讱 诇讛砖转诪砖 讜诇讛转拽讬谉 讗讜转诐 注诇 讛诪注专讻转.\n"
-"\n"
-"- 讘讗驻砖专讜转讱 诇讛转拽讬谉 讗转 讛讙讜驻谞讬诐 讘讚专讱 讛专讙讬诇讛. 讘诪拽专讬诐 谞讚讬专讬诐 驻讜谞讟讬诐 注诐 讘注讬讜转 "
-"注诇讜诇讬诐 诇住讙讜专 诇讱 讗转 讛诪诪砖拽 讛讙专驻讬."
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Generic Printers"
-msgstr ""
+msgid "Printer connection type"
+msgstr "住讜讙 讞讬讘讜专 诪讚驻住转"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "Abiword"
+msgid "No network adapter on your system!"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "StarOffice"
-msgstr ""
+msgid "Network %s"
+msgstr "专砖转 %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Ghostscript"
+msgid "Malayalam"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr ""
+msgid "Option %s out of range!"
+msgstr "讗驻砖专讜转 %s 讬爪讗讛 诪讛讙讘讜诇讜转!"
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+msgid "Connect %s"
+msgstr "诪讞讘专 %s"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Restarting CUPS..."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "About"
-msgstr "注诇 讝讛"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "诪讚驻讬住/住讜专拽/讻专讟讬住-转诪讜谞讛 讘\"%s\""
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
#, c-format
-msgid "Font List"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "诪砖讻驻诇 谞拽讜讚转 讞讬讘讜专 %s"
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Advanced Options"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
#, c-format
-msgid "Uninstall Fonts"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "讛讙讚专转 讞讬讘讜专"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Get Windows Fonts"
-msgstr ""
+msgid "Unknown|Generic"
+msgstr "诇讗 讬讚讜注|讻诇诇讬"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
#, c-format
-msgid "Import Fonts"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "done"
-msgstr ""
+msgid "Quit"
+msgstr "讬爪讬讗讛"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "xfs restart"
-msgstr ""
+msgid "Myanmar"
+msgstr "诪讬讗谞诪专"
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Auto allocate"
+msgstr "讛拽爪讘讛 讗讜讟讜诪讟讬转"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Restart XFS"
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "诇讘讚讜拽 讘诇讜拽讬诐 注诐 砖讙讬讗讜转?"
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "Suppress Temporary Files"
+msgid "Other MultiMedia devices"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
-msgid "type1inst building"
+msgid "No remote machines"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "ttf fonts conversion"
+msgid "Authentication NIS"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "讗驻砖专讜转 ''讛讙讘诇转 讗驻砖专讜讬讜转 砖讜专转 讛驻拽讜讚讛'' 诇讗 砖讬诪讜砖讬转 诇诇讗 住讬住诪讗"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "砖讬转讜祝 讗讬谞讟专谞讟 讻专讙注 诪讜转专"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type install done"
+msgid "Card IO_0"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "讗讬讞讜讚 讛谞住讬讻讜讬讜转 讛注专讘讬讜转"
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "True Type fonts installation"
+msgid "Card IO_1"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fonts copy"
-msgstr ""
+msgid "Thailand"
+msgstr "转讗讬诇谞讚"
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Search for fonts in installed list"
+msgid "Routers:"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "拽讝讞住讟谉"
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "Display all available remote CUPS printers"
+msgstr "专讬注谞讜谉 专砖讬诪转 诪讚驻住讜转 (讻讚讬 诇讛爪讬讙 讗转 讻诇 诪讚驻住讜转 讛CUPS 讛诪专讜讞拽讜转 讛讝诪讬谞讜转)"
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
#, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "讛转拽谞转 诇讬谞讜拽住 诪谞讚专讬讬拽 %s"
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "no fonts found"
+msgid "Thai keyboard"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Dialup options"
+msgstr "讗驻砖专讜讬讜转 讞讬讜讙 诇专砖转"
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
#, c-format
-msgid "Unselect fonts installed"
+msgid "Bouvet Island"
msgstr ""
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
"\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
+"谞讗 诇讛讞诇讬祝 讚讬住拽!\n"
+"\n"
+"谞讗 诇讛讻谞讬住 讗转 讛讚讬住拽 讛谞拽专讗 \"%s\" 诇讻讜谞谉 讜诇诇讞讜抓 讗讬砖讜专 讻讗砖专 住讬讬诪转.\n"
+"讗诐 讗讬谉 诇讱 讗讜转讜 讬砖 诇诇讞讜抓 讘讬讟讜诇 诇讛转拽谞讛 转讜讱 讛转注诇诪讜转 诪讚讬住拽 讝讛."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing configuration"
+msgid "Polish"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
+msgid "Mandrake Online"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "讛讛讙讚专讜转 讻讘专 谞注砖讜, 讜讻专讙注 讛谉 讗驻砖专讬讜转."
+msgid "\t-Network by webdav.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
-msgid "The setup has already been done, but it's currently disabled."
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
msgstr ""
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "Netmask"
msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../diskdrake/hd_gtk.pm:1
#, c-format
-msgid "Problems installing package %s"
-msgstr ""
+msgid "No hard drives found"
+msgstr "诇讗 谞诪爪讗讜 讻讜谞谞讬诐 拽砖讬讞讬诐"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Configuring..."
-msgstr ""
+msgid "2 buttons"
+msgstr "2 讻驻转讜专讬诐"
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "讗讬讝讛 住讜讙 讛讜讗 住讜讙 讞讬讘讜专 讛ISDN 砖诇讱?"
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Label"
+msgstr "转讜讜讬转"
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Save on floppy"
+msgstr "砖诪讬专讛 注诇 讚讬住拽讟"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The maximum lease (in seconds)"
+msgid "Printer auto-detection"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "The default lease (in seconds)"
+msgid "Which of the following is your ISDN card?"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
-msgid "The DHCP end range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "The DHCP start range"
+msgid "Msec"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "The internal domain name"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
+"=> 讬砖 诇砖讬诐 诇讘, 转讜讜讬转 砖讜谞转讛:\n"
+"%s"
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "The DNS Server IP"
-msgstr ""
+msgid "Number of capture buffers:"
+msgstr "诪住驻专 砖诇 转驻讬住转 讞讜爪爪讬诐:"
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "(This) DHCP Server IP"
-msgstr ""
+msgid "Your choice? (0/1, default `%s') "
+msgstr "讘讞讬专讛 砖诇讱? (0/1, 讘专讬专转 诪讞讚诇 `%s') "
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Local Network adress"
-msgstr "讻转讜讘转 专砖转 诪拽讜诪讬转"
+msgid "French"
+msgstr "爪专驻转讬转"
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "爪讻讬转 (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "转讛诇讬讱 讘讚讬拽转 讞讜诪专讛"
#: ../../standalone/drakgw:1
#, c-format
+msgid "Net Device"
+msgstr "讛转拽谉 专砖转"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "住讬讻讜诐"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-"讛讛讙讚专讜转 讛谞讜讻讞讬讜转 砖诇 `%s':\n"
-"\n"
-"专砖转: %s\n"
-"讻转讜讘转 IP: %s\n"
-"砖讬讜讱 IP: %s\n"
-"讛转拽谉: %s"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Current interface configuration"
-msgstr "讛讙讚专讜转 讛诪诪砖拽 讛谞讜讻讞讬"
+msgid "Next"
+msgstr "讛讘讗"
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "Show current interface configuration"
-msgstr "讛专讗讛 讗转 讛讙讚专讜转 讛诪诪砖拽 讛谞讜讻讞讬"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "讗讬 讗驻砖专 诇讛转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转 注诇 诪讞讬爪转 %s\n"
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "No (experts only)"
+msgid "CHAP"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Automatic reconfiguration"
+msgid "(bootp/dhcp/zeroconf)"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
"\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface already configured"
-msgstr ""
+msgid "Puerto Rico"
+msgstr "驻讜讗专讟讜-专讬拽讜"
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr ""
+
+#: ../../install_any.pm:1
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
-"%s\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
msgstr ""
+"讛讞讘讬诇讜转 讛讘讗讜转 讬讜住专讜 讻讚讬 诇讗驻砖专 讗转 注讚讻讜谉 讛诪注专讻转: %s\n"
+"\n"
+"\n"
+"讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讛住讬专 讞讘讬诇讜转 讗诇讛?\n"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Network interface"
-msgstr ""
+msgid "Anguilla"
+msgstr "讗谞讙讜讜讬讛"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
+msgid "NIS Domain"
+msgstr "诪专讞讘 NIS"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "No network adapter on your system!"
+msgid ""
+"\n"
+"- User Files:\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Interface %s"
-msgstr ""
+msgid "Antarctica"
+msgstr "讗谞讟讗专拽讟讬拽讛"
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
+msgid "Mount options"
+msgstr "讗驻砖专讜讬讜转 讞讬讘讜专"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Net Device"
-msgstr "讛转拽谉 专砖转"
+msgid "Jamaica"
+msgstr "讙~诪讬讬拽讛"
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection. If\n"
+"\\fIalert\\fP is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "砖讬转讜祝 讗讬谞讟专谞讟"
+msgid "Please wait, preparing installation..."
+msgstr "讗谞讗 讛诪转谉, 诪讻讬谉 讗转 讛讛转拽谞讛..."
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr ""
+msgid "Czech (QWERTZ)"
+msgstr "爪讻讬转 (QWERTZ)"
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Enabling servers..."
-msgstr "诪讗驻砖专 砖专转讬诐..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "dismiss"
-msgstr "诪砖讜讞专专"
+msgid "The port number should be an integer!"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "reconfigure"
-msgstr "讛讙讚专 诪讞讚砖"
+msgid "You must choose an image file first!"
+msgstr "注诇讬讱 诇讘讞讜专 拽讜讘抓 转诪讜谞讛 拽讜讚诐!"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "enable"
-msgstr "讛专砖讛"
+msgid "Restore from Hard Disk."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Add to LVM"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "砖讬转讜祝 讞讬讘讜专 讗讬谞讟专谞讟 讻专讙注 诪讘讜讟诇"
+msgid "DNS server"
+msgstr "砖专转 DNS"
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Internet Connection Sharing is now disabled."
+msgid "Trinidad and Tobago"
+msgstr "讟专讬谞讬讚讚 讜 讟讜讘讙讜"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Disabling servers..."
-msgstr "诪讘讟诇 砖专转讬诐..."
+msgid "simple"
+msgstr "驻砖讜讟"
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
-msgid "disable"
-msgstr "讘讬讟讜诇"
+msgid "Clear all"
+msgstr "谞拽讛 讛讻诇"
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
+msgid "No test pages"
+msgstr "讗讬谉 讚驻讬 谞住讬讜谉"
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "砖讬转讜祝 讗讬谞讟专谞讟 讻专讙注 诪讜转专"
+msgid "Adapter %s: %s"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "住诇讬讞讛, 讛转诪讬讻讛 讛讬讗 讘讙专注讬谞讬 2.4 讘诇讘讚."
+msgid "Falkland Islands (Malvinas)"
+msgstr "讗讬讬 驻讜拽诇谞讚 "
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr "诇讗 诪讜转拽谉 住讬讬专 讘诪注专讻转 砖诇讱, 谞讗 诇讛转拽讬谉 讗讞讚 讗诐 讘专爪讜谞讱 诇住讬讬专 讘诪注专讻转 讛注讝专讛"
+msgid "Unknown model"
+msgstr "诪讜讚诇 诇讗 讬讚讜注"
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Path"
-msgstr "诪讬拽讜诐 转讬拽讬讬讛"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
#, c-format
-msgid "group :"
-msgstr "拽讘讜爪讛 :"
+msgid "authentication"
+msgstr "讝讬讛讜讬"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "user :"
-msgstr "诪砖转诪砖 :"
+msgid "Backup Now"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Path selection"
-msgstr "讘讞讬专转 诪讬拽讜诐 转讬拽讬讬讛"
+msgid "/_File"
+msgstr "/_拽讜讘抓"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "诪住讬专 诪讚驻住转 诪Office/OpenOffice.org/GIMP."
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
#, c-format
-msgid "Use group id for execution"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Use owner id for execution"
+msgid "Tamil (ISCII-layout)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
+msgid "Mayotte"
+msgstr "诪讗讬讜讟"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "讬讜爪专 讚讬住拽讟 讛驻注诇讛 讗讜讟讜诪讟讬转..."
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Searching for scanners ..."
+msgstr "诪讞驻砖 住讜专拽讬诐 讞讚砖讬诐 ..."
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
#, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Partitioning"
+msgstr "诪讬讞讜抓"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "Property"
-msgstr ""
+msgid "Russia"
+msgstr "专讜住讬讛"
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Permissions"
-msgstr "讛专砖讗讜转"
+msgid "ethernet card(s) detected"
+msgstr "讻专讟讬住讬 专砖转 讝讜讛讜"
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Current user"
-msgstr "诪砖转诪砖 谞讜讻讞讬"
+msgid "Syslog"
+msgstr "诇讜讙 诪注专讻转"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "browse"
-msgstr "住讬讬专"
+msgid "Can't create catalog!"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
#, c-format
-msgid "Edit current rule"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "edit"
-msgstr "诇注专讜讱"
+msgid "Not enough free space for auto-allocating"
+msgstr "讗讬谉 诪住驻讬拽 诪拽讜诐 讞讜驻砖讬 诇诪讬拽讜诐 讗讜讟讜诪讟讬"
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Delete selected rule"
-msgstr "诇诪讞讜拽 讗转 讛讻诇诇 讛谞讘讞专"
+msgid "Set root password"
+msgstr "讛讙讚专转 住讬住诪讛 专讗砖讬转 (root)"
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "delete"
-msgstr "诇诪讞讜拽"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Add a new rule at the end"
-msgstr "讛讜住驻讛 砖诇 讞讜拽 讞讚砖 讘住讜祝"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "讗讞专讬 砖讬谞讜讬 讙讜讚诇 砖诇 诪讞讬爪讛 %s, 讻诇 讛诪讬讚注 注诇 诪讞讬爪讛 讝讜 讬讗讘讚"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "add a rule"
-msgstr "讛讜住驻讛 砖诇 讻诇诇"
+msgid "Internet connection configuration"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
#, c-format
-msgid "Move selected rule down one level"
+msgid "Scanning for TV channels"
+msgstr "诪讞驻砖 注专讜爪讬 讟诇讜讜讬讝讬讛"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Down"
-msgstr "诇讛讜专讬讚"
+msgid "/_About..."
+msgstr "/_注诇 讝讛..."
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Move selected rule up one level"
+msgid "Bengali"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Up"
-msgstr "诇注诇讜转"
+msgid "Preference: "
+msgstr "讛注讚驻讜转:"
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "select perm file to see/edit"
+msgid "Wizard..."
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
#, c-format
-msgid "permissions"
-msgstr "讛专砖讗讜转"
+msgid "Create a bootdisk"
+msgstr "讬爪讬专转 讚讬住拽讟 讗转讞讜诇"
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
#, c-format
-msgid "group"
-msgstr "拽讘讜爪讛"
+msgid "Solomon Islands"
+msgstr "讗讬讬 砖诇诪讛"
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
#, c-format
-msgid "user"
-msgstr "诪砖转诪砖"
+msgid "(module %s)"
+msgstr "(诪讜讚讜诇 %s)"
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "path"
-msgstr "诪讬拽讜诐 转讬拽讬讬讛"
+msgid "Workgroup"
+msgstr "拽讘讜爪讛"
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Location of auto_install.cfg file"
+msgid "Printer host name or IP"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "砖诐 讛诪讚驻住转 爪专讬讱 诇讛讻讬诇 专拽 讗讜转讬讜转, 诪住驻专讬诐 讜拽讜 转讞转讜谉"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "No image found"
-msgstr ""
+msgid "Show current interface configuration"
+msgstr "讛专讗讛 讗转 讛讙讚专讜转 讛诪诪砖拽 讛谞讜讻讞讬"
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
#, c-format
-msgid "Installation image directory"
-msgstr ""
+msgid "Development"
+msgstr "驻讬转讜讞"
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "Done"
+msgstr "住讬讜诐"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid "Web Server"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "The DHCP end ip"
+msgid "\tDo not include System Files\n"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
#, c-format
-msgid "The DHCP start ip"
+msgid "Chile"
+msgstr "爪~讬诇讛"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "诪诪砖拽 %s (注诇 专砖转 %s)"
+msgid "(already added %s)"
+msgstr "讻讘专 谞讜住祝 %s"
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
+msgid ", using command %s"
+msgstr ", 砖讬诪讜砖 讘驻拽讜讚讛 %s"
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
+msgid "Alt and Shift keys simultaneously"
+msgstr "诪拽砖讬 Alt 讜Shift 讘讗讜转讜 讝诪谉"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Installation Server Configuration"
-msgstr "讛转拽谞转 讛讙讚专讜转 砖专转"
+msgid "Flags"
+msgstr "讚讙诇讬诐"
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "PXE Server Configuration"
-msgstr "讛讙讚专转 砖专转 PXE"
+msgid "Add/Del Users"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Please wait, setting security options..."
-msgstr "谞讗 诇讛诪转讬谉, 诪讙讚讬专 讗驻砖专讜讬讜转 讗讘讟讞讛..."
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Please wait, setting security level..."
-msgstr "谞讗 诇讛诪转讬谉, 诪讙讚讬专 专诪转 讗讘讟讞讛..."
+msgid "weekly"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Periodic Checks"
+msgid "Settings"
+msgstr "讛讙讚专讜转"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
msgstr ""
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
#, c-format
-msgid "System Options"
-msgstr "讗驻砖专讜讬讜转 诪注专讻转"
+msgid "Here is the full list of available countries"
+msgstr "讛谞讛 讛专砖讬诪讛 讛诪诇讗讛 砖诇 讛诪拽诇讚讜转 讛讝诪讬谞讜转"
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Network Options"
-msgstr "讗驻砖专讜讬讜转 专砖转"
+msgid "Alternative test page (A4)"
+msgstr "讚祝 谞住讬讜谉 讗诇讟专谞讟讬讘讬 (A4)"
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"讗诐 讬砖 诇讱 讗转 讻诇 讛讚讬住拽讬诐 讛专砖讜诪讬诐 讬砖 诇诇讞讜抓 讗讬砖讜专.\n"
+"讗诐 讗讬谉 诇讱 讗祝 讚讬住拽 讬砖 诇诇讞讜抓 讘讬讟讜诇.\n"
+"讗诐 讞住专讬诐 诇讱 讚讬住拽讬诐 诪住讜讬讬诪讬诐 讬砖 诇讘讟诇 讘讞讬专转诐 讜讗讝 诇诇讞讜抓 讗讬砖讜专."
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Security Administrator:"
-msgstr "诪谞讛诇 讗讘讟讞讛:"
+msgid "Wait please"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Security Alerts:"
-msgstr "讛转专讗讜转 讗讘讟讞讛:"
+msgid "PAP"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Security Level:"
-msgstr "专诪转 讗讘讟讞讛:"
+msgid "Backup user files"
+msgstr ""
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
#, c-format
-msgid "(default value: %s)"
-msgstr ""
+msgid "New"
+msgstr "讞讚砖"
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-" to the Internet as a client.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
"\n"
-"High: There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
"\n"
-"Higher: The security is now high enough to use the system as a server "
-"which can accept\n"
-" connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-" should choose a lower level.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
"\n"
-"Paranoid: This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-" features are at their maximum\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
"\n"
-"Security Administrator:\n"
-" If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-" email)"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
#, c-format
msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"If you do not know what to choose, stay with the default option."
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "Load from floppy"
+msgstr "讟注讬谞讛 诪讚讬住拽讟"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The following printer was auto-detected. "
msgstr ""
-#: ../../standalone/draksound:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "No Sound Card detected!"
-msgstr "诇讗 讝讜讛讛 讻专讟讬住 拽讜诇!"
+msgid "Boot Floppy"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Norwegian"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Generating preview ..."
-msgstr "转爪讜讙讛 诪拽讚讬诪讛..."
+msgid "Searching for new scanners ..."
+msgstr "诪讞驻砖 住讜专拽讬诐 讞讚砖讬诐..."
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "You must choose an image file first!"
-msgstr "注诇讬讱 诇讘讞讜专 拽讜讘抓 转诪讜谞讛 拽讜讚诐!"
+msgid "Apache World Wide Web Server"
+msgstr "砖专转 WWW 砖诇 APACHI"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "ProgressBar color selection"
-msgstr "讘讞讬专转 爪讘注 驻住 讛讛转拽讚诪讜转"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "select path to restore (instead of /)"
msgstr ""
#: ../../standalone/draksplash:1
#, c-format
-msgid "saving Bootsplash theme..."
+msgid "Configure bootsplash picture"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "choose image file"
-msgstr "讬砖 诇讘讞讜专 拽讜讘抓 转诪讜谞讛"
+msgid "China"
+msgstr "住讬谉"
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose image"
-msgstr "讬砖 诇讘讞讜专 拽讜讘抓 转诪讜谞讛 "
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "(讬砖 诇讜讜讚讗 砖讻诇 讛诪讚驻住讜转 诪讞讜讘专讜转 讜讚讜诇拽讜转).\n"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "Configure bootsplash picture"
+msgid "Georgia"
+msgstr "讙~讜专讙~讬讛"
+
+#: ../../standalone/printerdrake:1
+#, c-format
+msgid "Reading data of installed printers..."
+msgstr "诪讞驻砖 诪讚驻住讜转 讞讚砖讜转... "
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "讛驻讜讱 讛讜讚注讜转 讙专注讬谉 诇砖拽讟讜转 讻讘专讬专转 诪讞讚诇"
+msgid "server"
+msgstr "砖专转"
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
#, c-format
-msgid "Display logo on Console"
-msgstr "讛爪讙 住诪诇 讘诪住讜祝"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "讛讻谞住 讚讬住拽讟 诪驻讜专诪讟 讻 FAT 诇讻讜谞谉 %s"
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Choose color"
-msgstr "讬砖 诇讘讞讜专 爪讘注"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "讻谉 讗讜诪专 砖诇诪注讘讚 讬砖 讬讞讬讚转 注讬讘讜讚 诪转诪讟讬转"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "Save theme"
-msgstr "砖诪讬专转 注专讻转 谞讜砖讗"
+msgid "Please Wait... Applying the configuration"
+msgstr "谞讗 诇讛诪转讬谉... 诪拽讘诇 讗转 讛讛讙讚专讜转"
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
#, c-format
-msgid "Preview"
-msgstr "转爪讜讙讛 诪拽讚讬诪讛"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "讘专讜讻讬诐 讛讘讗讬诐 诇讘讜讞专 诪注专讻转 讛讛驻注诇讛 - GRUB!"
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
#, c-format
-msgid "the color of the progress bar"
-msgstr "爪讘注 驻住 讛讛转拽讚诪讜转"
+msgid "Grub"
+msgstr "Grub"
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "the height of the progress bar"
+msgid "SCSI controllers"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "the width of the progress bar"
-msgstr "专讜讞讘 驻住 讛讛转拽讚诪讜转"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "注诇 砖专转 LPD - \"%s\" 诪讚驻住转 \"%s\""
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "Zeroconf Host name"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "text box height"
-msgstr "讙讜讘讛 转讬讘转 讟拽住讟"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "讻转讜讘转 IP 爪专讬讻讛 诇讛专讗讜转 讻讻讛 1.2.3.4"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "text width"
-msgstr "专讜讞讘 讟拽住讟"
+msgid "Ecuador"
+msgstr "讗拽讜讜讚讜专"
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Add an item"
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printers on this machine are available to other computers"
+msgstr ""
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "I can't find needed image file `%s'."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "诇讗 讝讜讛讜 讻专讟讬住讬 拽讜诇. 讬砖 诇谞住讜转 \"讞讜诪专讚专讬讬拽\" 讗讞专讬 讛讛转拽谞讛"
+
+#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
msgstr ""
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
#, c-format
-msgid "Browse"
-msgstr "住讬讬专"
+msgid "Shell"
+msgstr "诪注讟驻转"
-#: ../../standalone/draksplash:1
+#: ../../network/isdn.pm:1
#, c-format
-msgid "Theme name"
-msgstr "砖诐 注专讻转 谞讜砖讗"
+msgid "PCI"
+msgstr "PCI"
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
#, c-format
-msgid "final resolution"
-msgstr "专讝讜诇讜爪讬讛 住讜驻讬转"
+msgid "Sao Tome and Principe"
+msgstr "住讗讜 转讜诪讛 讜驻专讬谞住讬驻讛"
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "first step creation"
-msgstr "讬爪讬专转 砖诇讘 专讗砖讜谉"
+msgid "Can't login using username %s (bad password?)"
+msgstr "讗讬谉 讗驻砖专讜转 讻谞讬住讛 讘砖讬诪讜砖 砖诐 诪砖转诪砖 %s (住讬住诪讛 砖讙讜讬讛?)"
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "Azerbaidjani (latin)"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "Package not installed"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
#, c-format
-msgid "No TV Card detected!"
-msgstr "诇讗 讝讜讛讛 讻专讟讬住 讟诇讜讜讬讝讬讛"
+msgid "Become a MandrakeExpert"
+msgstr "讛驻讬讻讛 诇诪讜诪讞讛 诪谞讚专讬讬拽 (MandrakeExpert)"
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "注讻砖讬讜, 讗驻砖专 诇讛专讬抓 xawtv (转讞转 讞诇讜谉 讙专驻讬!) !\n"
+msgid "American Samoa"
+msgstr "住诪讜讗讛 讛讗诪专讬拽讗讬转"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Have a nice day!"
-msgstr "讬讜诐 讟讜讘!"
+msgid "Protocol"
+msgstr "驻专讜讟讜拽讜诇"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV 诇讗 诪讜转拽谉!"
+msgid "Copy fonts on your system"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "讛讬讬转讛 砖讙讬讗讛 讘讝诪谉 住专讬拽转 注专讜爪讬 讟诇讜讜讬讝讬讛"
+msgid "Harddrake help"
+msgstr "注讝专转 讞讜诪专讚专讬讬拽"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Scanning for TV channels"
-msgstr "诪讞驻砖 注专讜爪讬 讟诇讜讜讬讝讬讛"
+msgid "Bogomips"
+msgstr "Bogomips"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "讞讬驻砖 注专讜爪讬 讟诇讜讜讬讝讬讛 讘驻注讜诇讛..."
+msgid "Mandrake Terminal Server Configuration"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Area:"
-msgstr "讗讬讝讜专:"
+msgid ""
+"\n"
+" DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "TV norm:"
+msgid "Restore all backups"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "if set to yes, check open ports."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Australian Optus cable TV"
+msgid "This may take a moment to erase the media."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Newzealand"
-msgstr "谞讬讜讝讬诇谞讚"
+msgid "You can't select/unselect this package"
+msgstr "讗讬 讗驻砖专 诇讘讞讜专/诇讘讟诇 讗转 讞讘讬诇讛 讝讜"
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
#, c-format
-msgid "France [SECAM]"
-msgstr ""
+msgid "Warning"
+msgstr "讗讝讛专讛"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "East Europe"
+msgid ""
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "West Europe"
-msgstr ""
+msgid "Remote host name"
+msgstr "砖诐 砖专转 诪专讜讞拽"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "China (broadcast)"
+msgid "deactivate now"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
#, c-format
-msgid "Japan (cable)"
-msgstr "讬驻谉 (讻讘诇讬诐)"
+msgid "access to X programs"
+msgstr "讻谞讬住讛 诇转讜讻谞讬讜转 X"
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Computing the size of the Windows partition"
+msgstr "砖讬诪讜砖 讘砖讟讞 讛讞讜驻砖讬 注诇 诪讞讬爪转 讞诇讜谞讜转"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
-msgid "Canada (cable)"
-msgstr "拽谞讚讛 (讻讘诇讬诐)"
+msgid "Italy"
+msgstr "讗讬讟诇讬讛"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "Name of printer"
+msgstr "砖诐 讛诪讚驻住转"
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "USA (cable)"
-msgstr "讗专爪讜转 讛讘专讬转 (讻讘诇讬诐)"
+msgid "disable"
+msgstr "讘讬讟讜诇"
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "砖讙讬讗讛 讘谞讬转讜拽 %s: %s"
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgid "Do it!"
+msgstr "注砖讛 讝讗转!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
+msgstr "讗讬讬 拽讬讬诪讗谉"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "%s not responding"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "primary"
-msgstr "专讗砖讬"
+msgid "Select model manually"
+msgstr "讘讞讬专转 注爪诪讗讬转 讘诪讜讚诇"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "secondary"
-msgstr "诪砖谞讬"
+msgid "Format"
+msgstr "驻专诪讟"
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
#, c-format
msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Unknown"
-msgstr "诇讗 讬讚讜注"
+msgid "Various"
+msgstr "诪转拽讚诐"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "unknown"
-msgstr "诇讗 讬讚讜注"
+msgid "Zip"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Running \"%s\" ..."
-msgstr "诪专讬抓 \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Run config tool"
-msgstr "讛专爪转 讻诇讬 讛讙讚专讛"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"讬砖 诇住诪谉 讗转 讛诪讚驻住讜转 砖专讜爪讬诐 诇讛注讘讬专 讜诇诇讞讜抓 注诇\n"
+"\"讛注讘专讛\"."
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
#, c-format
-msgid "Configure module"
-msgstr "讛讙讚专转 诪讜讚讜诇"
+msgid "PDQ"
+msgstr "PDQ"
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Information"
-msgstr "诪讬讚注"
+msgid "Albanian"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Detected hardware"
-msgstr "讞讜诪专讛 砖讝讜讛转讛"
+msgid "Lithuania"
+msgstr "诇讬讟讗"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Harddrake2 version "
-msgstr "讙讬专住讗转 讞讜诪专讚专讬讬拽2"
+msgid "Compact"
+msgstr "拽讜诪驻拽讟讬"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Detection in progress"
-msgstr "讝讬讛讜讬 讘转讛诇讬讱"
+msgid "Detected model: %s %s"
+msgstr "讝讜讛讛 诪讜讚诇: %s %s"
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
#, c-format
-msgid "Author:"
-msgstr "注讜专讱:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr "MandrakeSoft 讘讞专讜 讗转 讛转讜讻谞讜转 讛讟讜讘讜转 讘讬讜转专 讘砖讘讬诇讱"
#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "About Harddrake"
-msgstr "注诇 讞讜诪专讚专讬讬拽"
+msgid "Local files"
+msgstr "拽讘爪讬诐 诪拽讜诪讬讬诐"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "/_About..."
-msgstr "/_注诇 讝讛..."
+msgid "maybe"
+msgstr "讗讜诇讬"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "/_Report Bug"
-msgstr "/_讚讬讜讜讞 讘讗讙"
+msgid "Panama"
+msgstr "驻谞诪讛"
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
-msgid "Select a device !"
-msgstr "讘讞专 讛转拽谉!"
+msgid "Monitor"
+msgstr "诪住讱"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Harddrake help"
-msgstr "注讝专转 讞讜诪专讚专讬讬拽"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 讗诇祝 爪讘注讬诐 (16 讘讬讟)"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Fields description"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Help"
-msgstr "/_注讝专讛"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "/_Quit"
-msgstr "/_讬爪讬讗讛"
+msgid "Size: %d KB\n"
+msgstr "讙讜讚诇: %d KB\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/讝讬讛讜讬 讗讜讟讜诪讟讬 砖诇 讻讜谞谞讬 _jazz"
+msgid "Remove fonts on your system"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "/Autodetect _modems"
-msgstr "/讝讬讛讜讬 讗讜讟讜诪讟讬 砖诇 _诪讜讚诪讬诐"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "/Autodetect _printers"
-msgstr "/讝讬讛讜讬 _诪讚驻住讜转 讗讜讟讜诪讟讬"
+msgid "Graphical interface at startup"
+msgstr "诪诪砖拽 讙专驻讬 讘讛转讞诇转 讛诪讞砖讘"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/_Options"
-msgstr "/_讗驻砖专讜讬讜转"
+msgid "Please enter the directory to save:"
+msgstr ""
#: ../../standalone/harddrake2:1
#, c-format
-msgid "the vendor name of the processor"
-msgstr "砖诐 讛讬爪专谉 砖诇 讛诪注讘讚"
+msgid "format of floppies supported by the drive"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
#, c-format
-msgid "the vendor name of the device"
-msgstr "砖诐 讛讬爪专谉 砖诇 讛讛转拽谉"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "讗讬谉 诪住驻讬拽 诪讞讬爪讜转 讘砖讘讬诇 砖诇讘 讛RAID %d\n"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "The type of bus on which the mouse is connected"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
msgstr ""
+"讛诪讚驻住讜转 讛讘讗讜转 诪讜讙讚专讜转. 讬砖 诇诇讞讜抓 驻注诪讬讬诐 注诇 诪讚驻住转 讻讚讬 诇砖谞讜转 讗转 讛讙讚专讜转讬讛; 讻讚讬 "
+"诇讛驻讜讱 讗讜转讛 诇诪讚驻住转 讘专讬专转 讛诪讞讚诇; 讗讜 讻讚讬 诇专讗讜转 诪讬讚注 注诇讬讛."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid "Connected"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Model stepping"
+msgid "USB printer \\#%s"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the number of the processor"
-msgstr "诪住驻专 讛诪注讘讚"
-
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Processor ID"
+msgid "Macedonian"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "network printer port"
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the name of the CPU"
-msgstr "砖诐 讛诪注讘讚 讛专讗砖讬"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "Name"
-msgstr "砖诐"
+msgid "/File/_Save"
+msgstr "/拽讜讘抓/_砖诪讬专讛"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "诪住驻专 讛诪拽砖讬诐 砖讬砖 诇注讻讘专"
+msgid "Mali"
+msgstr "诪讗诇讬"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Number of buttons"
-msgstr "诪住驻专 讻驻转讜专讬诐"
+msgid "No details"
+msgstr "讗讬谉 驻专讟讬诐"
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
#, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "讬驻讛 诪讗讜讚"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Model name"
-msgstr "砖诐 诪讜讚诇"
+msgid "Preview"
+msgstr "转爪讜讙讛 诪拽讚讬诪讛"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "讚讜专 讛诪注讘讚: (诇讚讜讙诪讗: 8 诇驻谞讟讬讜诐 3,...)"
+msgid "Remote Control"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Model"
-msgstr "诪讜讚诇"
+msgid "Please select media for backup..."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "hard disk model"
-msgstr "诪讜讚诇 讻讜谞谉 拽砖讬讞"
+msgid "XFree86 server: %s\n"
+msgstr "砖专转 Xfree86: %s\n"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "class of hardware device"
+msgid "Allow Thin Clients"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Media class"
+msgid "Georgian (\"Russian\" layout)"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+msgid "/_Options"
+msgstr "/_讗驻砖专讜讬讜转"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Level"
-msgstr "砖诇讘"
+msgid "Your printer model"
+msgstr "讛诪讜讚诇 砖诇 讛诪讚驻住转 砖诇讱"
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
#, c-format
-msgid "Format of floppies supported by the drive"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Floppy format"
-msgstr "驻讬专诪讜讟 讚讬住拽讟"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "Halt bug"
-msgstr "讘讗讙 转拽讬注讛"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
#, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "讻诇讬 讛讛讙讚专讜转 讛专讘-砖讬诪讜砖讬 砖诇 诪谞讚专讬讬拽"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid "F00f bug"
+msgid "Save"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "The %s is unsupported"
+msgstr "讛%s 讛讝讛 诇讗 谞转诪讱"
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "讟讜注谉 讗转 诪谞讛诇讬 讛讛转拽谉 诇讞讜诪专转 讛usb 砖诇讱."
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid "Disk"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Is FPU present"
+msgid "Enter a printer device URI"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Israel"
+msgstr "讬砖专讗诇"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "讚讙诇讬 诪注讘讚 诪讚讜讜讞讬诐 注诇 讬讚讬 讛讙专注讬谉"
+msgid "French Guiana"
+msgstr "讙讬讗谞讛 讛爪专驻转讬转"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Flags"
-msgstr "讚讙诇讬诐"
+msgid "default:LTR"
+msgstr "default:RTL"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "add a rule"
+msgstr "讛讜住驻讛 砖诇 讻诇诇"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Module"
-msgstr "诪讜讚讜诇"
+msgid "A command line must be entered!"
+msgstr "砖讜专转 驻拽讜讚讛 讞讬讬讘转 诇讛讬讜转 诪讜讻谞住转!"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "Select user manually"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "New devfs device"
-msgstr "讛转拽谉 devfs 讞讚砖"
+msgid "Transfer printer configuration"
+msgstr "讛讙讚专转 讛注讘专转 诪讚驻住转"
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "old static device name used in dev package"
-msgstr "砖诐 讛讛转拽谉 讛住讟讟讬 讛讬砖谉 讘砖讬诪讜砖 讘dev package"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "讛讗诐 讘专爪讜谞讱 诇讗驻砖专 讛讚驻住讛 讘诪讚驻住转 讛诪讜讝讻专转 讻讗谉?\n"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Old device file"
-msgstr "拽讜讘抓 讛转拽谉 讬砖谉"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "This field describes the device"
+msgid "%s (Port %s)"
+msgstr "%s (Port %s)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
#, c-format
msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "Frequency (MHz)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
#, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "Accept user"
+msgstr "拽讘诇转 诪砖转诪砖"
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
-msgid "Cpuid level"
-msgstr "专诪转 Cpuid"
+msgid "Server"
+msgstr "砖专转"
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
#, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "讛诪砖驻讞讛 砖诇 讛诪注讘讚 (讻诪讜 6 诇诪注讘讚讬 i686)"
+msgid "Bad choice, try again\n"
+msgstr "讘讞讬专讛 讙专讜注讛, 讬砖 诇谞住讜转 砖讜讘\n"
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
#, c-format
-msgid "Cpuid family"
-msgstr "诪砖驻讞转 Cpuid"
+msgid "Heard and McDonald Islands"
+msgstr "讗讬讬 拽讬讬拽讜住"
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
#, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "讛讗诐 诇诪注讘讚 讛讝讛 讬砖 讗转 讘讗讙 讛转专讚诪转 砖诇 Cyrix 6x86?"
+msgid "No alternative driver"
+msgstr "讗讬谉 诪谞讛诇 讛转拽谉 讗诇讟专谞讟讬讘讬"
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Coma bug"
-msgstr "讘讗讙 转专讚诪转"
+msgid "Toggle to expert mode"
+msgstr "注讘讜专 诇诪爪讘 诪讜诪讞讛"
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(注诇 讛诪注专讻转 讛讝讜)"
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
#, c-format
-msgid "Drive capacity"
-msgstr "拽讬讘讜诇转 讻讜谞谉"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "讙讜讚诇 诪讟诪讜谉 讛诪注讘讚 (砖诇讘 砖谞讬)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr "诪讜讚诐 \"%s\" 诪住讜讙 winmodem 讝讜讛讛, 讛讗诐 讘专爪讜谞讱 诇讛转拽讬谉 讗转 讛转讜讻谞讛 讛讚专讜砖讛?"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Cache size"
-msgstr "讙讜讚诇 诪讟诪讜谉"
+msgid "Looking at packages already installed..."
+msgstr "诪讞驻砖 讞讘讬诇讜转 砖讻讘专 诪讜转拽谞讜转..."
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
msgstr ""
-"- 讛转拽谞讬 pci: 讝讛 谞讜转谉 讗转 讞专讬抓 讛PCI, 讛转拽谉 讜驻讜谞拽爪讬讜转 砖诇 讛讻专讟讬住\n"
-"- 讛转拽谞讬 eide: 讛讛转拽谉 讛讜讗 讗讜 讛讗讚讜谉 (master) 讗讜 注讘讚(slave)\n"
-"- 讛转拽谞讬 scsi: 讛bus 砖诇 讛scsi 讜讛讝讬讛讜讬 讛转拽谉 砖诇 讛scsi"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Location on the bus"
-msgstr "诪讬拽讜诐 注诇 讛bus"
+msgid "Driver"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-"- 讛转拽谞讬 PCI 讜USB: 讝讛 讘专砖讬诪转 讬爪专谉, 讛转拽谉, 讬爪专谉 诪砖谞讛 讜讛转拽谉 诪砖谞讛 砖诇 讝讬讛讜讬 PCI/"
-"USB."
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "Bus identification"
-msgstr "讝讬讛讜讬 Bus"
+msgid "Printer on remote lpd server"
+msgstr "诪讚驻住转 注诇 砖专转 lpd 诪专讜讞拽"
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
#, c-format
msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"拽专谞诇 讛讙谞讜/诇讬谞讜拽住 爪专讬讱 诇讛驻注讬诇 诇讜诇讗讛 讞讬砖讜讘讬转 讘讝诪谉 讛讗转讞讜诇 讘讻讚讬 诇讝讛讜转 住驻讬专转 "
-"砖注讜谉. 讛转讜爪讗讛 诪讗讜讞住谞转 砖 bogomips 讻讚专讱 诇\"讗讘讞讜谉\" 讛诪注讘讚"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"诇驻谞讬 讛转拽谞转 讙讜驻谞讬诐, 注诇讬讬讱 诇讜讜讚讗 砖讘讗驻砖专讜转讱 诇讛砖转诪砖 讜诇讛转拽讬谉 讗讜转诐 注诇 讛诪注专讻转.\n"
+"\n"
+"- 讘讗驻砖专讜转讱 诇讛转拽讬谉 讗转 讛讙讜驻谞讬诐 讘讚专讱 讛专讙讬诇讛. 讘诪拽专讬诐 谞讚讬专讬诐 驻讜谞讟讬诐 注诐 讘注讬讜转 "
+"注诇讜诇讬诐 诇住讙讜专 诇讱 讗转 讛诪诪砖拽 讛讙专驻讬."
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "注专讜抓 EIDE/SCSI"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Channel"
-msgstr "注专讜抓"
+msgid "No mouse"
+msgstr "讗讬谉 注讻讘专"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "讝讛 讛bus 讛驻讬讝讬 砖讗诇讬讜 讛讛转拽谉 诪讞讜讘专 (讻诪讜 PCI,USB 讜注讜讚...)"
+msgid "Germany"
+msgstr "讙专诪谞讬讛"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
-msgid "Bus"
-msgstr "Bus"
+msgid "Austria"
+msgstr "讗讜住讟专讬讛"
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "讛专砖讬诪讛 砖诇 讛转拽谞讬诐 讗诇讟专谞讟讬讘讬诐 诇讻专讟讬住 拽讜诇 讛讝讛"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "谞讗 诇讛专讬抓 \"sndconfig\" 讗讞专讬 讛讛转拽谞讛 讘讻讚讬 诇讛讙讚讬专 讗转 讻专讟讬住 讛拽讜诇 砖诇讱"
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
-msgid "Alternative drivers"
-msgstr "讛转拽谞讬诐 讗诇讟专谞讟讬讘讬诐"
+msgid "Collapse Tree"
+msgstr "讚讞讜住 注抓"
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "讛讗诐 讘专爪讜谞讱 诇讛砖转诪砖 讘诪拽砖 讛BackSpace (->) 讻讚讬 诇讛讞讝讬专 诪讞讬拽讛 讘诪住讜祝?"
+msgid "Auto Install Configurator"
+msgstr "诪讙讚讬专 讛讛转拽谞讛 讛讗讜讟讜诪讟讬转"
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "谞讗 诇讘讞讜专 讗转 转爪讜专转 讛诪拽砖讬诐."
+msgid "Configure networking"
+msgstr "讛讙讚专转 讛专砖转"
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "诇讗 诪住讜讙诇 诇讛转讞讬诇 注讚讻讜谉 讞讬讬!!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "讗讬驻讛 讘专爪讜谞讱 诇讛转拽讬谉 讗转 诪讗转讞诇 讛诪注专讻转?"
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1
#, c-format
msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
msgstr ""
-"谞讗 诇讛讻谞讬住 讗转 讚讬住拽 讛讛转拽谞讛 讘讻讜谞谉 砖诇讱 讜诇诇讞讜抓 讗讬砖讜专 诇讗讞专 诪讻谉.\n"
-"讗诐 讗讬谉 诇讱 讗讜转讜, 讬砖 诇诇讞讜抓 讘讬讟讜诇 讻讚讬 诇讛诪谞注 诪注讚讻讜谉 讞讬讬."
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Change Cd-Rom"
-msgstr "讛讞诇驻转 Cd-Rom"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "讛%s 诇讗 谞转诪讱 讘讙专住讗 讛谞讜讻讞讬转 砖诇 诇讬谞讜拽住 诪谞讚专讬讬拽."
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "讛砖讬谞讜讬 讛住转讬讬诐, 讗讱 讻讚讬 砖讬讛讬讛 讘注诇 诪砖诪注讜转 注诇讬讱 诇爪讗转"
+msgid "DHCP client"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
#, c-format
-msgid "Save as.."
-msgstr "砖诪讬专讛 讘砖诐..."
+msgid "Restoring from file %s failed: %s"
+msgstr "砖讞讝u专 诪转讜讱 拽讜讘抓 %s 谞讻砖诇: %s"
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Please enter your email address below "
-msgstr "谞讗 诇讛讻谞讬住 讗转 讻转讜讘转 讛讚讜讗诇 讻讗谉"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "注讻讘专 logitech (住专讬讗诇讬, 诪住讜讙 C7 讬砖谉)"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "alert configuration"
-msgstr "讛讙讚专讜转 讛转专讗讜转"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "讘讗诪转 讘专爪讜谞讱 诇讛讙讚讬专 讛讚驻住讛 讘诪讞砖讘 讝讜?\n"
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "转拽讘诇/讬 讛转专讗讛 讗诐 讛讟注讬谞讛 讙讘讜讛讛 诪讛注专讱 讛讝讛"
+msgid "New devfs device"
+msgstr "讛转拽谉 devfs 讞讚砖"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "load setting"
-msgstr "讟讜注谉 讛讙讚专讛"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "讬讚讜讜讞 诇讱 讗诐 讗讞讚 诪讛砖讬专讜转讬诐 讛谞讘讞专讬诐 诇讗 驻讜注诇 注讜讚"
+msgid "Boot Style Configuration"
+msgstr "讛讙讚专转 住讙谞讜谉 讟注讬谞转 讛诪注专讻转"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "service setting"
-msgstr "讛讙讚专讜转 砖讬专讜转"
+msgid "Automatic time synchronization"
+msgstr "住讬谞讻专讜谉 讝诪谉 讗讜讟讜诪讟讬"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Xinetd Service"
-msgstr "砖讬专讜转 Xinetd "
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
#, c-format
-msgid "Webmin Service"
-msgstr "砖讬专讜转 Webmin"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "转讜讚讛 诇讱 注诇 讻讱 砖讘讞专转 诪谞讚专讬讬拽 诇讬谞讜拽住 9.1"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "SSH Server"
-msgstr "砖专转 SSH"
+msgid "Armenian (phonetic)"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "Samba Server"
-msgstr "砖专转 samba"
+msgid "Card model:"
+msgstr "诪讜讚诇 讻专讟讬住:"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Postfix Mail Server"
-msgstr "砖专转 讛讚讜讗诇 砖诇 Postfix"
+msgid "Thin Client"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Ftp Server"
-msgstr "砖专转 ftp"
+msgid "Start Server"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Domain Name Resolver"
-msgstr ""
+msgid "Turkmenistan"
+msgstr "讟讜专拽诪谞讬住讟讗谉"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "砖专转 WWW 砖诇 APACHI"
+msgid "All remote machines"
+msgstr "讻诇 讛诪讻讜谞讜转 讛诪专讜讞拽讜转"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Install themes"
+msgstr "讛转拽谞转注专讻讜转 谞讜砖讗"
+
+#: ../../standalone/drakbackup:1
#, c-format
msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""
-"讘专讜讻讬诐 讛讘讗讬诐 诇讻诇讬 讛讙讚专讜转 讛讚讜讗诇.\n"
-"\n"
-"讻讗谉, 转讜讻诇讜 诇讛讙讚讬专 讗转 诪注专讻转 讛讛址转职专指讗指讜转.\n"
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
#, c-format
-msgid "Mail alert configuration"
-msgstr "讘讙讚专讜转 讛转专讗讜转 讚讜讗诇"
+msgid "Espanol"
+msgstr "住驻专讚讬转"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "Mail alert"
-msgstr "讛转专讗讜转 讚讜讗诇"
+msgid "Preparing installation"
+msgstr "诪讻讬谉 讗转 讛讛转拽谞讛"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "谞讗 诇讛诪转讬谉, 驻讜专住 拽讜讘抓: %s"
+msgid "Edit selected host/network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
#, c-format
-msgid "Content of the file"
-msgstr "转讻讜诇转 讛拽讜讘抓"
+msgid "Add User -->"
+msgstr "<-- 讛讜住驻转 诪砖转诪砖"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Calendar"
-msgstr "诇讜讞 砖谞讛"
+msgid "Nauru"
+msgstr "谞讗讜专讜"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Choose file"
-msgstr "讬砖 诇讘讞讜专 拽讜讘抓"
+msgid "True Type fonts installation"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "but not matching"
-msgstr "讗讘诇 诇讗 讛砖讜讜讗讛"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "matching"
-msgstr "讛砖讜讜讗讛"
+msgid "LAN configuration"
+msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Settings"
-msgstr "讛讙讚专讜转"
+msgid "hard disk model"
+msgstr "诪讜讚诇 讻讜谞谉 拽砖讬讞"
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "讻诇讬 诇讛爪讙转 诇讜讙讬诐"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "讗讬谞讱 讬讻讜诇/讛 诇讛砖转诪砖 讘讻专讱 诇讜讙讬 砖诇 LVM 诇谞拽讜讚转 讞讬讘讜专 %s"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "search"
-msgstr "讞讬驻讜砖"
+msgid "Get Windows Fonts"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "讛住讘专 注诇 讻诇讬 诪谞讚专讬讬拽"
+msgid "Mouse Systems"
+msgstr "诪注专讻讜转 注讻讘专"
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Syslog"
-msgstr "诇讜讙 诪注专讻转"
+msgid "Iranian"
+msgstr "讗讬专谞讬转"
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Messages"
-msgstr "讛讜讚注讜转"
+msgid "Croatia"
+msgstr "拽专讜讗讟讬讛"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "User"
-msgstr "诪砖转诪砖"
+msgid "Gateway:"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Help/_About..."
-msgstr "/注讝专讛/_注诇 讝讛..."
+msgid "Add server"
+msgstr "讛讜住驻转 砖专转"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "/Options/Test"
-msgstr "/讗驻砖专讜讬讜转/讘讚讬拽讛"
+msgid "Remote printer name"
+msgstr "砖诐 诪讚驻住转 诪专讜讞拽转"
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
#, c-format
-msgid "/File/-"
-msgstr "/拽讜讘抓/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together in order to highly reduce hacking risks."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "/File/Save _As"
-msgstr "/拽讜讘抓/砖诪讬专讛 _讘砖诐"
+msgid "Device: "
+msgstr "讛转拽谉:"
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
-msgid "<control>S"
-msgstr "<Ctrl>S"
+msgid "Printerdrake"
+msgstr "讛讚驻住讚专讬讬拽"
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
#, c-format
-msgid "/File/_Save"
-msgstr "/拽讜讘抓/_砖诪讬专讛"
+msgid "License agreement"
+msgstr "讛住讻诐 专讬砖讜讬"
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
#, c-format
-msgid "<control>O"
-msgstr "<Ctrl>O"
+msgid "System Options"
+msgstr "讗驻砖专讜讬讜转 诪注专讻转"
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "/File/_Open"
-msgstr "/拽讜讘抓/_驻转讬讞讛"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
#, c-format
-msgid "<control>N"
-msgstr "<Ctrl>N"
+msgid "Please choose the desired security level"
+msgstr "谞讗 诇讘讞讜专 讗转 专诪转 讛讗讘讟讞讛 讛专爪讜讬讛"
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "/File/_New"
-msgstr "/拽讜讘抓/_讞讚砖"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "讛诪讗专讞 讛讝讛 讻讘专 讘专砖讬诪讛, 讗讬 讗驻砖专 诇讛讜住讬祝 讗讜转讜 砖讜讘.\n"
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
#, c-format
-msgid "Show only for the selected day"
-msgstr "讛专讗讛 专拽 讗转 讛讬讜诐 讛谞讘讞专"
+msgid ", USB printer"
+msgstr ", 诪讚驻住转 USB"
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid "Emulate third button?"
-msgstr "诇讚诪讜转 讻驻转讜专 砖诇讬砖讬?"
+msgid "Choose the applications that will support the fonts:"
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Please choose your mouse type."
-msgstr "谞讗 诇讘讞讜专 讗转 住讜讙 讛注讻讘专 砖诇讱."
+msgid "Configure X"
+msgstr "讛讙讚专转 X"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Connect %s"
-msgstr "诪讞讘专 %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "讟讜专拽讬转 (诪讜讚诇 \"F\" 诪住讜专转讬)"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Disconnect %s"
-msgstr "诪谞转拽 %s"
+msgid "Congratulations!"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr "讗讝讛专讛, 讞讬讘讜专 讗讬谞讟专谞讟 讗讞专 讝讜讛讛, 讗讜诇讬 诪砖转诪砖 讘专砖转 砖诇讱"
+msgid "Use owner id for execution"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "received"
-msgstr "讛转拽讘诇"
+msgid "Down"
+msgstr "诇讛讜专讬讚"
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
-msgid "transmitted"
-msgstr "讛讜注讘专"
+msgid "Raw printer (No driver)"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
#, c-format
-msgid "received: "
-msgstr "讛转拽讘诇讜:"
+msgid "Install rpm"
+msgstr "讛转拽谉 专驻诪"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "sent: "
-msgstr "谞砖诇讞讜:"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
#, c-format
-msgid "Local measure"
-msgstr "诪讚讚 诪拽讜诪讬"
+msgid "Time remaining "
+msgstr "讝诪谉 谞讜转专"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "average"
-msgstr "诪诪讜爪注"
+msgid "UK keyboard"
+msgstr "诪拽诇讚转 讗谞讙诇讬讛"
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
-msgid "Color configuration"
-msgstr "讛讙讚专讜转 爪讘注"
+msgid "Unmount"
+msgstr "谞讬转讜拽"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+msgid "Uninstall Fonts"
msgstr ""
-"讛转讞讘专讜转 谞讻砖诇讛.\n"
-"谞讗 诇讘讚讜拽 讗转 讛讛讙讚专讜转 讘诪专讻讝 讛讛讙讚专讜转 砖诇 诪谞讚专讬讬拽."
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
#, c-format
-msgid "Connection complete."
-msgstr "讛转讞讘专讜转 讛讜砖诇诪讛."
+msgid "Microsoft Explorer"
+msgstr "诪讬拽专讜住讜驻讟 讗拽住驻诇讜专专"
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "讛讛转谞转拽讜转 诪讛讗讬谞讟专谞讟 讛讜砖诇诪讛 讘讛爪诇讞讛."
+msgid "German (no dead keys)"
+msgstr "讙专诪谞讬转 (诇诇讗 诪拽砖讬诐 诪转讬诐)"
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "讛讛转谞转拽讜转 诪讛讗讬谞讟专谞讟 谞讻砖诇讛."
+msgid "Transferring %s..."
+msgstr "诪注讘讬专 讗转 %s..."
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
-msgid "Connecting to the Internet "
-msgstr "诪转讞讘专 诇讗讬谞讟专谞讟"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 讗诇祝 爪讘注讬诐 (15 讘讬讟)"
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
#, c-format
-msgid "Disconnecting from the Internet "
-msgstr "诪转谞转拽 诪讛讗讬谞讟专谞讟"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "讘讬讻讜诇讱 诇讬爪讗 讘砖讬诪讜砖 NFS 讗讜 Samba. 讘讘拽砖讛 讘讞专 讘诪讛 讘专爪讜谞讱 诇讛砖转诪砖."
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "谞讗 诇讛诪转讬谉, 讘讜讚拽 讗转 讛讞讬讘讜专 砖诇讱..."
+msgid "Reboot"
+msgstr "讛驻注诇讛 诪讞讚砖"
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
#, c-format
-msgid "Logs"
-msgstr "诇讜讙讬诐"
+msgid "Gambia"
+msgstr "讙诪讘讬讛"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
#, c-format
-msgid "Connection Time: "
-msgstr "讝诪谉 讞讬讘讜专:"
+msgid "Mandrake Control Center"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
#, c-format
-msgid "Receiving Speed:"
-msgstr "诪讛讬专讜转 拽讘诇讛:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
#, c-format
-msgid "Sending Speed:"
-msgstr "诪讛讬专讜转 砖诇讬讞讛:"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Statistics"
-msgstr "住讟讟讬住讟讬拽讛"
+msgid "\t-Tape \n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
#, c-format
-msgid "Profile "
-msgstr "驻专讜驻讬诇"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr "诇讗 诪讜转拽谉 住讬讬专 讘诪注专讻转 砖诇讱, 谞讗 诇讛转拽讬谉 讗讞讚 讗诐 讘专爪讜谞讱 诇住讬讬专 讘诪注专讻转 讛注讝专讛"
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Network Monitoring"
-msgstr "转爪讜讙转 诪爪讘 专砖转"
+msgid "Remember this password"
+msgstr ""
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Reading data of installed printers..."
-msgstr "诪讞驻砖 诪讚驻住讜转 讞讚砖讜转... "
+msgid "Internet Connection Sharing is now enabled."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Name/IP address of host:"
-msgstr "砖诐/讻转讜讘转 IP 砖诇 讛诪讗专讞:"
+msgid "\t-Network by SSH.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "讛诪讗专讞 讛讝讛 讻讘专 讘专砖讬诪讛, 讗讬 讗驻砖专 诇讛讜住讬祝 讗讜转讜 砖讜讘.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+"讗诐 讛诪讚驻住转 讛专爪讜讬讛 讝讜讛转讛 讗讜讟诪讟讬转, 讬砖 诇讘讞讜专 讗讜转讛 诪讛专砖讬诪讛 讜讗讝 诇讛讜住讬祝 砖诐 诪砖转诪砖, "
+"住讬住诪讛, 讜/讗讜 拽讘讜爪讛 讗诐 爪专讬讱."
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid "Use the free space on the Windows partition"
+msgstr "讛砖转诪砖 讘砖讟讞 讛讞讜驻砖讬 注诇 诪讞讬爪转 讞诇讜谞讜转"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "讞讜讘讛 注诇讬讱 诇讛讻谞讬住 砖诐 诪讗专讞 讗讜 讻转讜讘转 IP.\n"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s 谞诪爪讗 讘%s, 诇讛讙讚讬专 讗讜转讜 讗讜讟讜诪讟讬转?"
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "讬砖 诇讘讞讜专 诪讗专讞 砖讘讜 讛住讜专拽讬诐 讛诪拽讜诪讬讬诐 讬讛讬讜 讝诪讬谞讬诐:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
#, c-format
-msgid "Sharing of local scanners"
-msgstr "砖讬转讜祝 砖诇 住讜专拽讬诐 诪拽讜诪讬讬诐"
+msgid "XFree86 driver: %s\n"
+msgstr "诪谞讛诇 讛转拽谉 Xfree86: %s\n"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "This machine"
-msgstr "诪注专讻转 讝讜"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid "Remove selected host"
-msgstr "诇讛住讬专 讗转 讛诪讗专讞 讛谞讘讞专"
+msgid ""
+"\n"
+" DrakBackup Report \n"
+"\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
-msgid "Edit selected host"
-msgstr "注专讜讱 诪讗专讞 砖谞讘讞专"
+msgid "Choose the packages you want to install"
+msgstr "讘讞专 讗转 讛讞讘讬诇讜转 砖讘专爪讜谞讱 诇讛转拽讬谉"
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "Add host"
-msgstr "讛讜住驻转 诪讗专讞"
+msgid "Papua New Guinea"
+msgstr "驻讗驻讜讗讛-讙讬谞讗讛 讛讞讚砖讛"
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "讗诇讛 讛诪讞砖讘讬诐 砖诪讛诐 讛住讜专拽讬诐 讗诪讜专讬诐 诇讛讬讜转 砖诪讬砖讬诐:"
+msgid "Serbian (cyrillic)"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid "Usage of remote scanners"
-msgstr "砖讬诪讜砖 讘住讜专拽讬诐 诪专讜讞拽讬诐"
+msgid "Make kernel message quiet by default"
+msgstr "讛驻讜讱 讛讜讚注讜转 讙专注讬谉 诇砖拽讟讜转 讻讘专讬专转 诪讞讚诇"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "All remote machines"
-msgstr "讻诇 讛诪讻讜谞讜转 讛诪专讜讞拽讜转"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"讛讗诐 讘专爪讜谞讱 砖\"%s\" 转讛讬讛 诪讚驻住转\n"
+"讘专讬专转 讛诪讞讚诇?"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "讗诇讛 讛诪讞砖讘讬诐 砖讘讛诐 讛住讜专拽讬诐 砖诪讞讜讘讬诐 诪拽讜诪讬转 讗诪讜专讬诐 诇讛讬讜转 讝诪讬谞讬诐:"
+msgid "The DHCP end range"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "砖讬诪讜砖 讘住讜专拽讬诐 讗诇讛 转讞转 讛诪讗专讞讬诐:"
+msgid "Creating bootdisk..."
+msgstr "讬讜爪专 讚讬住拽讟 讛驻注诇转 诪注专讻转..."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
#, c-format
-msgid "Use scanners on remote computers"
-msgstr "砖讬诪讜砖 讘住讜专拽讬诐 转讞转 诪讞砖讘讬诐 诪专讜讞拽讬诐"
+msgid "Wait please, testing your connection..."
+msgstr "谞讗 诇讛诪转讬谉, 讘讜讚拽 讗转 讛讞讬讘讜专 砖诇讱..."
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "住讜讙专 讗转 讛专砖转"
+msgid "Bringing down the network"
+msgstr "诪讜专讬讚 讗转 讛专砖转"
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "讛住讜专拽讬诐 注诇 诪讞砖讘 讝讛 讝诪讬谞讬诐 诇诪讞砖讘讬诐 讗讞专讬诐"
+msgid "Login ID"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr "讘讗驻砖专讜转讱 讙诐 诇讛讞诇讬讟 讗诐 住讜专拽讬诐 注诇 诪讞砖讘讬诐 诪专讜讞拽讬诐 讬讛讬讜 讝诪讬谞讬诐 诇诪讞砖讘 讝讛."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "DHCP Client"
msgstr ""
-"讻讗谉 讘讗驻砖专讜转讱 诇讘讞讜专 讗诐 讛住讜专拽讬诐 讛诪讞讜讘专讬诐 诇诪讞砖讘 讝讛 讬讜讻诇讜 诇讛讬讜转 讝诪讬谞讬诐 诇诪讞砖讘讬诐 "
-"诪专讜讞拽讬诐."
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "讬爪讬专讛 诪讞讚砖 砖诇 专砖讬诪转 讛住讜专拽讬诐 讛诪讜讙讚专讬诐 ..."
+msgid "dismiss"
+msgstr "诪砖讜讞专专"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for new scanners ..."
-msgstr "诪讞驻砖 住讜专拽讬诐 讞讚砖讬诐..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "诪讚驻讬住/住讜专拽 讘\"%s\""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
#, c-format
-msgid "Searching for configured scanners ..."
-msgstr "诪讞驻砖 住讜专拽讬诐 诪讜讙讚专讬诐..."
+msgid "omit raid modules"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
#, c-format
-msgid "Scanner sharing"
-msgstr "砖讬转讜祝 住讜专拽"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
#, c-format
-msgid "Add a scanner manually"
-msgstr "讛讜住驻讛 注爪诪讗讬转 砖诇 住讜专拽"
+msgid "Internet Connection Configuration"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
#, c-format
-msgid "Search for new scanners"
-msgstr "讞讬驻讜砖 住讜专拽讬诐 讞讚砖讬诐"
+msgid "comma separated numbers"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "诇讗 谞诪爪讗讜 住讜专拽讬诐 讝诪讬谞讬诐 讘诪注专讻转 砖诇讱.\n"
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr ""
#: ../../standalone/scannerdrake:1
#, c-format
@@ -16593,342 +16694,309 @@ msgstr ""
"%s\n"
"讝诪讬谉 讘诪注专讻转 砖诇讱.\n"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"讛住讜专拽讬诐 讛讘讗讬诐\n"
-"\n"
-"%s\n"
-"讝诪讬谞讬诐 讘诪注专讻转 砖诇讱.\n"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"讛 %s 砖诇讱 讛讜讙讚专.\n"
-"注讻砖讬讜 讘讗驻砖专讜转讱 诇住专讜拽 诪住讻讬诐 讘注讝专转 \"XSane\" 诪-诪讜诇讟诪讬讚讛/讙专驻讬拽讛 讘转驻专讬讟 讛转讜讻谞讜转."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "choose device"
-msgstr "讬砖 诇讘讞讜专 讛转拽谉"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "讛讗诐 讘讗诪转 讘专爪讜谞讱 诇讛住讬专 讗转 讛诪讚驻住转 \"%s\"?"
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "谞讗 诇讘讞讜专 讗转 讛讛转拽谉 砖讗诇讬讜 讛%s 砖诇讱 诪讞讜讘专"
+msgid "I can't find any room for installing"
+msgstr "讗讬谞讬 诪讜爪讗 诪拽讜诐 诇讛转拽谞讛"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Searching for scanners ..."
-msgstr "诪讞驻砖 住讜专拽讬诐 讞讚砖讬诐 ..."
+msgid "Default printer"
+msgstr "诪讚驻住转 讘专讬专转 诪讞讚诇"
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
#, c-format
-msgid "Auto-detect available ports"
-msgstr "讝讬讛讜讬 讗讜讟讜诪讟讬转 砖诇 ports 讝诪讬谞讬诐"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
+msgid "Modify RAID"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
#, c-format
msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
msgstr ""
-"讛 %s 讞讬讬讘 诇讛讬讜转 诪讜讙讚专 注诇 讬讚讬 printerdrake.\n"
-"讘讗驻砖专讜转讱 诇讛驻注讬诇 讗转 printerdrake 诪诪专讻讝 讛讘拽专讛 砖诇 诪谞讚专讬讬拽 讘诪讚讜专 讞讜诪专讛."
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
#, c-format
-msgid "The %s is unsupported"
-msgstr "讛%s 讛讝讛 诇讗 谞转诪讱"
+msgid "Add user"
+msgstr "讛讜住驻转 诪砖转诪砖"
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "讛 %s 讗讬谞讜 讬讚讜注 讘讙讬专住讗 讝讜 砖诇 Scandrake."
+msgid "RAID-disks %s\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "讛%s 诇讗 谞转诪讱 讘讙专住讗 讛谞讜讻讞讬转 砖诇 诇讬谞讜拽住 诪谞讚专讬讬拽."
+msgid "Liberia"
+msgstr "诇讬讘专讬讛"
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid ", "
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "讘讞讬专转 讛诪拽诇讚转 砖诇讱"
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
#, c-format
-msgid "Detected model: %s"
-msgstr "讝讜讛讛 讚讙诐: %s"
+msgid "Format partitions"
+msgstr "驻讬专诪讜讟 诪讞讬爪讜转"
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid " ("
+msgid "Automatic correction of CUPS configuration"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
#, c-format
-msgid "Select a scanner model"
-msgstr "讬砖 诇讘讞讜专 讚讙诐 砖诇 住讜专拽"
+msgid "Running \"%s\" ..."
+msgstr "诪专讬抓 \"%s\" ..."
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s 诇讗 谞诪爪讗 讘诪讗讙专 讛谞转讜谞讬诐 砖诇 住讜专拽讬诐, 专讜爪讛 诇讛讙讚讬专 讝讗转 诇讘讚?"
+msgid "enable radio support"
+msgstr "讗驻砖专 转诪讬讻转 专讚讬讜"
#: ../../standalone/scannerdrake:1
#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s 谞诪爪讗 讘%s, 诇讛讙讚讬专 讗讜转讜 讗讜讟讜诪讟讬转?"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "转讛诇讬讱 讘讚讬拽转 讞讜诪专讛"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "诪住驻专 讛转拽谞讬诐 讛讜住驻讜:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "住讜讙专 讗转 讛专砖转"
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "诪住驻专 讛转拽谞讬 讘专诪转 讛讞讜诪专讛 \"%s\" 讛讜住专讜:\n"
+msgid "Loopback file name: %s"
+msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+msgid "Please choose the printer to which the print jobs should go."
msgstr ""
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid "Welcome to the Open Source world."
-msgstr "讘专讜讻讬诐 讛讘讗讬诐 诇注讜诇诐 讛拽讜讚 讛驻转讜讞."
+msgid "Do not transfer printers"
+msgstr "谞讗 诇讗 诇讛注讘讬专 讗转 讛诪讚驻住讜转"
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../help.pm:1
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "转讜讚讛 诇讱 注诇 讻讱 砖讘讞专转 诪谞讚专讬讬拽 诇讬谞讜拽住 9.1"
+msgid "Delay before booting the default image"
+msgstr "讛诪转谞讛 诇驻谞讬 讗转讞讜诇 诪注专讻转 讘专讬专转 讛诪讞讚诇"
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+" DUPONT Sebastien (original version)\n"
+" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-"讻讚讬 诇砖转祝 诪讬讚注 讜诇讘谞讜转 转讜讻谞讜转 诇诇讬谞讜拽住, 讛爪讟专驻讜 讗诇 驻讜专讜诪讬 讛讚讬讜谞讬诐 砖诇谞讜 注诇 讚驻讬 讛"
-"\"拽讛讬诇讛\" 砖诇谞讜."
+"转讜讻谞讛 讝讜 讛讬讗 转讜讻谞讛 讞讜驻砖讬转; 讘讗驻砖专讜转讱 诇砖谞讜转讛 讗讜 诇讛驻讬爪讛 讗讜转讛 诪讞讚砖 转讞转 专砖讬讜谉\n"
+"讛GPL 讘讙讬专住讗 2 讗讜 讙讬专住讗 诪讗讜讞专转 讬讜转专.\n"
+"讛讗讞专讬讜转 注诇 砖讬诪讜砖 讘转讜讻谞讛 讝讜 讞诇讛 注诇 讛诪砖转诪砖 讘诇讘讚.\n"
+"注诇讬讱 诇拽讘诇 注讜转拽 砖诇 GPL 注诐 转讜讻谞讬转 讝讜; 讗诐 诇讗 讻讱 讛讚讘专, 讬砖 诇讻转讜讘 讗诇\n"
+"Free software Foundation, \n"
+" Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+msgid "Please check for multisession CD"
msgstr ""
-"专讜爪讛 诇讚注转 注讜讚 注诇 讛爪讟专驻讜转 诇拽讛讬诇转 讛拽讜讚 讛驻转讜讞? 讛讬讜 诪注讜专讘讬诐 讘注讜诇诐 讛转讜讻谞讛 讛讞讜驻砖讬转!"
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
#, c-format
-msgid "Build the future of Linux!"
-msgstr "讘谞讬讬转 讛注转讬讚 砖诇 诇讬谞讜拽住!"
+msgid "user"
+msgstr "诪砖转诪砖"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+msgid "Use Hard Disk to backup"
msgstr ""
-"讜讻诪讜讘谉, 讚讞讬驻转 讛诪讜诇讟讬诪讚讬讛 诇讙讘讜诇讜转 砖诇讛 注诐 讛诪讬诇讛 讛讗讞专讜谞讛 诇讛爪讙转 住专讟讬诐, 讛拽砖讘讛 "
-"诇诪讜讝讬拽讛 讜注专讬讻转 转诪讜谞讜转 讜爪讬诇讜诪讬诐."
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
#, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
-"讙诇讬砖讛 讘讗讬谞讟专谞讟 注诐 诪讜讝讬诇讛 讗讜 拽讜谞拽讬, 拽专讬讗转 讚讜讗诇 注诐 Evolution 讗讜 Kmail, 讬爪讬专转 "
-"诪住诪讻讬诐 注诐 Kword."
+msgid "Configure"
+msgstr "讛讙讚专讜转"
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr "MandrakeSoft 讘讞专讜 讗转 讛转讜讻谞讜转 讛讟讜讘讜转 讘讬讜转专 讘砖讘讬诇讱"
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/drakconnect:1
#, c-format
msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../share/advertising/04-configuration.pl:1
-#, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "讻诇讬 讛讛讙讚专讜转 讛专讘-砖讬诪讜砖讬 砖诇 诪谞讚专讬讬拽"
-
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+msgid "Backup Users"
msgstr ""
-#: ../../share/advertising/05-desktop.pl:1
-#, c-format
-msgid "A customizable environment"
-msgstr "住讘讬讘讛 讗砖专 谞讬转谞转 诇讛转讗诪讛 讗讬砖讬转"
-
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
#, c-format
msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
msgstr ""
-#: ../../share/advertising/06-development.pl:1
-#, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "诇讬谞讜拽住 诪谞讚专讬讬拽 9.1: 驻诇讟驻讜专诪转 讛驻讬转讜讞 讛讗讜诇讟讬诪讟讬讘讬转"
-
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgid "Select Printer Spooler"
msgstr ""
-"讛驻讬讻转 讛诪讞砖讘 诇砖专转 诇讬谞讜拽住 讘注诇 注讜爪诪讛: 砖专转 Web, 讚讜讗诇, 讞讜诪转 讗砖, 专讗讜讟专, 拽讘爪讬诐 讜砖专转 "
-"讛讚驻住讛 (讜注讜讚) 讘诪专讞拽 讻诪讛 诇讞讬爪讜转 讘诇讘讚!"
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
#, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "讛驻讬讻转 讛诪讞砖讘 诇砖专转 讗诪讬谉"
+msgid "Create new theme"
+msgstr "讬爪讬专转 注专讻转 谞讜砖讗 讞讚砖讛"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"讟讜讜讞 讛驻转专讜谞讜转 讛专讞讘 砖诇谞讜 诇诇讬谞讜拽住, 讻诪讜 讻谉 讛爪注讜转 诪讬讜讞讚讜转 注诇 诪讜爪专讬诐 讜讚讘专讬诐 讟讜讘讬诐 "
-"讗讞专讬诐, 讝诪讬谞讬诐 讘讞谞讜转 讛诪拽讜讜谞转 砖诇谞讜:"
+msgid "Mandrake Tools Explanation"
+msgstr "讛住讘专 注诇 讻诇讬 诪谞讚专讬讬拽"
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/drakpxe:1
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "讛讞谞讜转 讛专砖诪讬转 砖诇 MandrakeSoft "
+msgid "No image found"
+msgstr ""
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../install_steps.pm:1
#, c-format
msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"诪住驻专 讞讘讬诇讜转 讞砖讜讘讜转 诇讗 讛讜转拽谞讜 讻专讗讜讬.\n"
+"讻谞专讗讛 砖讬砖 讘注讬讛 讘讚讬住拽 讗讜 讘cdrom 砖诇讱.\n"
+"讬砖 诇讘讚讜拽 讗转 讛讚讬住拽 注诇 诪讞砖讘 诪讜转拽谉 讘注讝专转 \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr "讛砖讙转 讛驻专讬讟讬诐 讛讟讜讘讬诐 讘讬讜转专 注诐 讛砖讜转驻讬诐 讛讗住讟专讟讙讬讬诐 砖诇 诪谞讚专讬讬拽 诇讬谞讜拽住"
+msgid "Detected model: %s"
+msgstr "讝讜讛讛 讚讙诐: %s"
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "讬讬注讜诇 讛讗讘讟讞讛 讚专讱 诪谞讚专讬讬拽 诇讬谞讜拽住"
+msgid "if set to yes, run the daily security checks."
+msgstr "讗诐 诪讜讙讚 诇讻谉, 诪专讬抓 讘讚讬拽讜转 讗讘讟讞讛 诪转讜讝诪谞讜转."
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "诪讜爪专 讝讛 讝诪讬谉 讘讗转专 MandrakeStore."
+msgid "Azerbaijan"
+msgstr "讗讝专讘讬讙~讗谉"
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
msgstr ""
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr "讗讘讟讞转 讛专砖转 砖诇讱 注诐 讞讜诪转 讛讗砖 诪砖讜诇砖转 砖诇 专砖转"
+msgid "Dvorak (US)"
+msgstr ""
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
-msgstr ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgstr "讝讛 讛bus 讛驻讬讝讬 砖讗诇讬讜 讛讛转拽谉 诪讞讜讘专 (讻诪讜 PCI,USB 讜注讜讚...)"
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
#, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+msgid "How is the printer connected?"
msgstr ""
-"诪爪讬讗转 驻转专讜谉 诇讘注讬讜转讱 谞注砖讬转 驻砖讜讟讛 讚专讱 驻诇讟驻讜专诪转 讛转诪讬讻讛 讛诪拽讜讜谞转 砖诇 "
-"MandrakeSoft's."
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
#, c-format
-msgid "Become a MandrakeExpert"
-msgstr "讛驻讬讻讛 诇诪讜诪讞讛 诪谞讚专讬讬拽 (MandrakeExpert)"
+msgid "Security level"
+msgstr "专诪转 讛讗讘讟讞讛"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "final resolution"
+msgstr "专讝讜诇讜爪讬讛 住讜驻讬转"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "驻诇讟驻讜专诪讛 诪拽讜讜谞转 诇转讙讜讘讛 诇爪专讻讬 诇讬讜讝诪转 爪专讻讬 转诪讬讻讛."
+msgid "Services"
+msgstr "砖讬专讜转讬诐"
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
#, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "讗讬讙讜讚 MandrakeExpert"
+msgid "4 MB"
+msgstr "4 MB"
#: ../../share/compssUsers:999
msgid "Office Workstation"
@@ -16943,10 +17011,6 @@ msgstr ""
"gnumeric),诪爪讬讙讬 pdf, 讜注讜讚"
#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "转讞谞转 注讘讜讚讛"
-
-#: ../../share/compssUsers:999
msgid "Game station"
msgstr "转讞谞转 注讘讜讚讛 诇诪砖讞拽讬诐"
@@ -17016,10 +17080,6 @@ msgid ""
msgstr "住讘讬讘转 砖讜诇讞谉 讛注讘讜讚讛 K, 住讘讬讘讛 讙专驻讬转 讘住讬住讬转 注诐 讻诇讬诐"
#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "住讘讬讘讛 讙专驻讬转"
-
-#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "转讞谞转 注讘讜讚讛 砖诇 Gnome"
@@ -17038,10 +17098,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 讜注讜讚"
#: ../../share/compssUsers:999
-msgid "Development"
-msgstr "驻讬转讜讞"
-
-#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "住驻专讬讜转 驻讬转讜讞 讘C 讜C++, 转讜讻谞讜转 讜拽讘爪讬 include"
@@ -17110,33 +17166,71 @@ msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "砖专转 NFS, 砖专转 SMB, 砖专转 Proxy, 砖专转 ssh"
#: ../../share/compssUsers:999
-msgid "Audio station"
-msgstr "转讞谞转 注讘讜讚讛 诇拽讜诇"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"住讟 讻诇讬诐 诇拽专讬讗讛 讜讻转讬讘转 讚讜讗诇 讜讞讚砖讜转 (pine, mutt, tin..) 讜诇讙诇讬砖讛 讘讗讬谞讟专谞讟"
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr "转讜讻谞讜转 诇讛砖诪注讛 讗讜 注专讬讻讛 砖诇 拽讜诇"
+#~ msgid "Internet connection & configuration"
+#~ msgstr "讞讬讘讜专 讗讬谞讟专谞讟 讜讛讙讚专讜转"
-#: ../../share/compssUsers:999
-msgid "Video station"
-msgstr "转讞谞转 注讘讜讚讛 诇讜讬讚讗讜"
+#~ msgid "Configure the connection"
+#~ msgstr "讛讙讚专转 讛讞讬讘讜专"
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr "转讜讻谞讜转 诇讛砖诪注讛 砖诇 讜讬讚讗讜"
+#~ msgid "Disconnect"
+#~ msgstr "谞讬转讜拽"
-#: ../../share/compssUsers:999
-msgid "Graphic station"
-msgstr "转讞谞转 注讘讜讚讛 诇讙专驻讬拽讛"
+#~ msgid "Connect"
+#~ msgstr "讛转讞讘专讜转"
-#: ../../share/compssUsers:999
-msgid "Graphics programs"
-msgstr "转讜讻谞讜转 讙专驻讬讜转"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "讬砖 讘讗驻砖专讜转讱 诇讛讙讚讬专 诪讞讚砖 讗转 讗转 讛讞讬讘讜专 砖诇讱."
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"住讟 讻诇讬诐 诇拽专讬讗讛 讜讻转讬讘转 讚讜讗诇 讜讞讚砖讜转 (pine, mutt, tin..) 讜诇讙诇讬砖讛 讘讗讬谞讟专谞讟"
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "讘讗驻砖专讜转讱 诇讛转谞转拽 讗讜 诇讛讙讚讬专 诪讞讚砖 讗转 讛讞讬讘讜专 砖诇讱."
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "讟注谉 诪讞讚砖 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "讻转讜讘 %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "诪注转讬拽 %s 诇%s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "诪讙讘讛 %s 诇%s.old"
+
+#~ msgid "Author:"
+#~ msgstr "注讜专讱:"
+
+#~ msgid "Audio station"
+#~ msgstr "转讞谞转 注讘讜讚讛 诇拽讜诇"
+
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "转讜讻谞讜转 诇讛砖诪注讛 讗讜 注专讬讻讛 砖诇 拽讜诇"
+
+#~ msgid "Video station"
+#~ msgstr "转讞谞转 注讘讜讚讛 诇讜讬讚讗讜"
+
+#~ msgid "Video playing programs"
+#~ msgstr "转讜讻谞讜转 诇讛砖诪注讛 砖诇 讜讬讚讗讜"
+
+#~ msgid "Graphic station"
+#~ msgstr "转讞谞转 注讘讜讚讛 诇讙专驻讬拽讛"
+
+#~ msgid "Graphics programs"
+#~ msgstr "转讜讻谞讜转 讙专驻讬讜转"
#~ msgid "Printer sharing"
#~ msgstr "砖讬转讜祝 诪讚驻住转"
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
index b666ed7e5..7b0ddfeae 100644
--- a/perl-install/share/po/hr.po
+++ b/perl-install/share/po/hr.po